Monitoring Poisson observations using combined applications of Shewhart and EWMA charts

NASA Astrophysics Data System (ADS)

Abujiya, Mu'azu Ramat

2017-11-01

The Shewhart and exponentially weighted moving average (EWMA) charts for nonconformities are the most widely used procedures of choice for monitoring Poisson observations in modern industries. Individually, the Shewhart EWMA charts are only sensitive to large and small shifts, respectively. To enhance the detection abilities of the two schemes in monitoring all kinds of shifts in Poisson count data, this study examines the performance of combined applications of the Shewhart, and EWMA Poisson control charts. Furthermore, the study proposes modifications based on well-structured statistical data collection technique, ranked set sampling (RSS), to detect shifts in the mean of a Poisson process more quickly. The relative performance of the proposed Shewhart-EWMA Poisson location charts is evaluated in terms of the average run length (ARL), standard deviation of the run length (SDRL), median run length (MRL), average ratio ARL (ARARL), average extra quadratic loss (AEQL) and performance comparison index (PCI). Consequently, all the new Poisson control charts based on RSS method are generally more superior than most of the existing schemes for monitoring Poisson processes. The use of these combined Shewhart-EWMA Poisson charts is illustrated with an example to demonstrate the practical implementation of the design procedure.

Individual Brain Charting, a high-resolution fMRI dataset for cognitive mapping.

PubMed

Pinho, Ana Luísa; Amadon, Alexis; Ruest, Torsten; Fabre, Murielle; Dohmatob, Elvis; Denghien, Isabelle; Ginisty, Chantal; Becuwe-Desmidt, Séverine; Roger, Séverine; Laurier, Laurence; Joly-Testault, Véronique; Médiouni-Cloarec, Gaëlle; Doublé, Christine; Martins, Bernadette; Pinel, Philippe; Eger, Evelyn; Varoquaux, Gaël; Pallier, Christophe; Dehaene, Stanislas; Hertz-Pannier, Lucie; Thirion, Bertrand

2018-06-12

Functional Magnetic Resonance Imaging (fMRI) has furthered brain mapping on perceptual, motor, as well as higher-level cognitive functions. However, to date, no data collection has systematically addressed the functional mapping of cognitive mechanisms at a fine spatial scale. The Individual Brain Charting (IBC) project stands for a high-resolution multi-task fMRI dataset that intends to provide the objective basis toward a comprehensive functional atlas of the human brain. The data refer to a cohort of 12 participants performing many different tasks. The large amount of task-fMRI data on the same subjects yields a precise mapping of the underlying functions, free from both inter-subject and inter-site variability. The present article gives a detailed description of the first release of the IBC dataset. It comprises a dozen of tasks, addressing both low- and high- level cognitive functions. This openly available dataset is thus intended to become a reference for cognitive brain mapping.

Tactile Acuity Charts: A Reliable Measure of Spatial Acuity

PubMed Central

Bruns, Patrick; Camargo, Carlos J.; Campanella, Humberto; Esteve, Jaume; Dinse, Hubert R.; Röder, Brigitte

2014-01-01

For assessing tactile spatial resolution it has recently been recommended to use tactile acuity charts which follow the design principles of the Snellen letter charts for visual acuity and involve active touch. However, it is currently unknown whether acuity thresholds obtained with this newly developed psychophysical procedure are in accordance with established measures of tactile acuity that involve passive contact with fixed duration and control of contact force. Here we directly compared tactile acuity thresholds obtained with the acuity charts to traditional two-point and grating orientation thresholds in a group of young healthy adults. For this purpose, two types of charts, using either Braille-like dot patterns or embossed Landolt rings with different orientations, were adapted from previous studies. Measurements with the two types of charts were equivalent, but generally more reliable with the dot pattern chart. A comparison with the two-point and grating orientation task data showed that the test-retest reliability of the acuity chart measurements after one week was superior to that of the passive methods. Individual thresholds obtained with the acuity charts agreed reasonably with the grating orientation threshold, but less so with the two-point threshold that yielded relatively distinct acuity estimates compared to the other methods. This potentially considerable amount of mismatch between different measures of tactile acuity suggests that tactile spatial resolution is a complex entity that should ideally be measured with different methods in parallel. The simple test procedure and high reliability of the acuity charts makes them a promising complement and alternative to the traditional two-point and grating orientation thresholds. PMID:24504346

Optimization and validation of moving average quality control procedures using bias detection curves and moving average validation charts.

PubMed

van Rossum, Huub H; Kemperman, Hans

2017-02-01

To date, no practical tools are available to obtain optimal settings for moving average (MA) as a continuous analytical quality control instrument. Also, there is no knowledge of the true bias detection properties of applied MA. We describe the use of bias detection curves for MA optimization and MA validation charts for validation of MA. MA optimization was performed on a data set of previously obtained consecutive assay results. Bias introduction and MA bias detection were simulated for multiple MA procedures (combination of truncation limits, calculation algorithms and control limits) and performed for various biases. Bias detection curves were generated by plotting the median number of test results needed for bias detection against the simulated introduced bias. In MA validation charts the minimum, median, and maximum numbers of assay results required for MA bias detection are shown for various bias. Their use was demonstrated for sodium, potassium, and albumin. Bias detection curves allowed optimization of MA settings by graphical comparison of bias detection properties of multiple MA. The optimal MA was selected based on the bias detection characteristics obtained. MA validation charts were generated for selected optimal MA and provided insight into the range of results required for MA bias detection. Bias detection curves and MA validation charts are useful tools for optimization and validation of MA procedures.

Resource Document for the Design of Electronic Instrument Approach Procedure Displays

DOT National Transportation Integrated Search

1995-03-01

Instrument approach procedure (IAP) charts play a large role in contributing to the success or failure of approaches and : landings. Paper IAP charts have been criticized for excessive clutter, for text sizes that are too small to read, and : for ina...

Charts designate probable future oceanographic research fields

NASA Technical Reports Server (NTRS)

1968-01-01

Charts outline the questions and problems of oceanographic research in the future. NASA uses the charts to estimate the probable requirements for instrumentation carried by satellites engaged in cooperative programs with other agencies concerned with identification, analysis, and solution of many of these problems.

A design procedure and handling quality criteria for lateral directional flight control systems

NASA Technical Reports Server (NTRS)

Stein, G.; Henke, A. H.

1972-01-01

A practical design procedure for aircraft augmentation systems is described based on quadratic optimal control technology and handling-quality-oriented cost functionals. The procedure is applied to the design of a lateral-directional control system for the F4C aircraft. The design criteria, design procedure, and final control system are validated with a program of formal pilot evaluation experiments.

Designing Flightdeck Procedures

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Mauro, Robert; Degani, Asaf; Loukopoulou, Loukia

2016-01-01

The primary goal of this document is to provide guidance on how to design, implement, and evaluate flight deck procedures. It provides a process for developing procedures that meet clear and specific requirements. This document provides a brief overview of: 1) the requirements for procedures, 2) a process for the design of procedures, and 3) a process for the design of checklists. The brief overview is followed by amplified procedures that follow the above steps and provide details for the proper design, implementation and evaluation of good flight deck procedures and checklists.

14 CFR Appendix F to Part 23 - Test Procedure

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Test Procedure F Appendix F to Part 23...—Test Procedure Part I—Acceptable Test Procedure for Self-Extinguishing Materials for Showing Compliance With §§ 23.853, 23.855, and 23.1359 Acceptable test procedure for self-extinguishing materials for...

14 CFR Appendix F to Part 23 - Test Procedure

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Test Procedure F Appendix F to Part 23...—Test Procedure Part I—Acceptable Test Procedure for Self-Extinguishing Materials for Showing Compliance With §§ 23.853, 23.855, and 23.1359 Acceptable test procedure for self-extinguishing materials for...

Design of Training Systems, Phase II Report, Volume III; Model Program Descriptions and Operating Procedures. TAEG Report No. 12-2.

ERIC Educational Resources Information Center

Naval Training Equipment Center, Orlando, FL. Training Analysis and Evaluation Group.

The Design of Training Systems (DOTS) project was initiated by the Department of Defense (DOD) to develop tools for the effective management of military training organizations. Volume 3 contains the model and data base program descriptions and operating procedures designed for phase 2 of the project. Flow charts and program listings for the…

Beyond simple charts: Design of visualizations for big health data

PubMed Central

Ola, Oluwakemi; Sedig, Kamran

2016-01-01

Health data is often big data due to its high volume, low veracity, great variety, and high velocity. Big health data has the potential to improve productivity, eliminate waste, and support a broad range of tasks related to disease surveillance, patient care, research, and population health management. Interactive visualizations have the potential to amplify big data’s utilization. Visualizations can be used to support a variety of tasks, such as tracking the geographic distribution of diseases, analyzing the prevalence of disease, triaging medical records, predicting outbreaks, and discovering at-risk populations. Currently, many health visualization tools use simple charts, such as bar charts and scatter plots, that only represent few facets of data. These tools, while beneficial for simple perceptual and cognitive tasks, are ineffective when dealing with more complex sensemaking tasks that involve exploration of various facets and elements of big data simultaneously. There is need for sophisticated and elaborate visualizations that encode many facets of data and support human-data interaction with big data and more complex tasks. When not approached systematically, design of such visualizations is labor-intensive, and the resulting designs may not facilitate big-data-driven tasks. Conceptual frameworks that guide the design of visualizations for big data can make the design process more manageable and result in more effective visualizations. In this paper, we demonstrate how a framework-based approach can help designers create novel, elaborate, non-trivial visualizations for big health data. We present four visualizations that are components of a larger tool for making sense of large-scale public health data. PMID:28210416

Beyond simple charts: Design of visualizations for big health data.

PubMed

Ola, Oluwakemi; Sedig, Kamran

2016-01-01

Health data is often big data due to its high volume, low veracity, great variety, and high velocity. Big health data has the potential to improve productivity, eliminate waste, and support a broad range of tasks related to disease surveillance, patient care, research, and population health management. Interactive visualizations have the potential to amplify big data's utilization. Visualizations can be used to support a variety of tasks, such as tracking the geographic distribution of diseases, analyzing the prevalence of disease, triaging medical records, predicting outbreaks, and discovering at-risk populations. Currently, many health visualization tools use simple charts, such as bar charts and scatter plots, that only represent few facets of data. These tools, while beneficial for simple perceptual and cognitive tasks, are ineffective when dealing with more complex sensemaking tasks that involve exploration of various facets and elements of big data simultaneously. There is need for sophisticated and elaborate visualizations that encode many facets of data and support human-data interaction with big data and more complex tasks. When not approached systematically, design of such visualizations is labor-intensive, and the resulting designs may not facilitate big-data-driven tasks. Conceptual frameworks that guide the design of visualizations for big data can make the design process more manageable and result in more effective visualizations. In this paper, we demonstrate how a framework-based approach can help designers create novel, elaborate, non-trivial visualizations for big health data. We present four visualizations that are components of a larger tool for making sense of large-scale public health data.

14 CFR Appendix F to Part 23 - Test Procedure

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Test Procedure F Appendix F to Part 23...—Test Procedure Acceptable test procedure for self-extinguishing materials for showing compliance with... as sandwich panels, may not be separated for a test. The specimen thickness must be no thicker than...

Design charts for arbitrarily pivoted, liquid-lubricated flat-sector-pad thrust bearing

NASA Technical Reports Server (NTRS)

Etsion, I.

1977-01-01

A flat, sector-shaped geometry for a liquid-lubricated thrust bearing is analyzed considering both the pitch and roll of the pad. Results are presented in design charts that enable a direct approach to the design of point- and line-pivoted, tilting pad bearings. A comparison is made with the Mitchell bearing approximation and it is found that this approximation always overestimates load capacity.

Design charts for predicting downwash angles and wake characteristics behind plain and flapped wings

NASA Technical Reports Server (NTRS)

Silverstein, Abe; Katzoff, S

1939-01-01

Equations and design charts are given for predicting the downwash angles and the wake characteristics for power-off conditions behind plain and flapped wings of the types used in modern design practice. The downwash charts cover the cases of elliptical wings and wings of taper ratios 1, 2, 3, and 5, with aspect ratios of 6, 9, and 12, having flaps covering 0, 40, 70, and 100 percent of the span. Curves of the span load distributions for all these cases are included. Data on the lift and the drag of flapped airfoil sections and curves for finding the contribution of the flap to the total wing lift for different types of flap and for the entire range of flap spans are also included. The wake width and the distribution of dynamic pressure across the wake are given in terms of the profile-drag coefficient and the distance behind the wing. A method of estimating the wake position is also given. The equations and charts are based on theory that has been shown in a previous report to be in agreement with experiment.

Charts for the minimum-weight design of 24s-t aluminum-alloy flat compression panels with longitudinal z-section stiffeners

NASA Technical Reports Server (NTRS)

Schuette, Evan H

1945-01-01

Design charts are developed for 24s-t aluminum-alloy flat compression panels with longitudinal z-section stiffeners. These charts make possible the design of the lightest panels of this type for a wide range of design requirements. Examples of the use of the charts are given and it is pointed out on the basis of these examples that, over a wide range of design conditions, the maintenance of buckle-free surfaces does not conflict with the achievement of high structural efficiency. The achievement of the maximum possible structural efficiency with 24s-t aluminum-alloy panels, however, requires closer stiffener spacings than those now in common use.

Color Charts, Esthetics, and Subjective Randomness

ERIC Educational Resources Information Center

Sanderson, Yasmine B.

2012-01-01

Color charts, or grids of evenly spaced multicolored dots or squares, appear in the work of modern artists and designers. Often the artist/designer distributes the many colors in a way that could be described as "random," that is, without an obvious pattern. We conduct a statistical analysis of 125 "random-looking" art and design color charts and…

Tool for reading psychrometric charts

NASA Technical Reports Server (NTRS)

De Angelo, F. T.

1969-01-01

Three-legged, clear plastic tool is designed so that the angles of each leg correspond with the angles of psychometric chart construction for each of the three required scales. The appropriate edges are tapered to the chart surface.

State-Chart Autocoder

NASA Technical Reports Server (NTRS)

Clark, Kenneth; Watney, Garth; Murray, Alexander; Benowitz, Edward

2007-01-01

A computer program translates Unified Modeling Language (UML) representations of state charts into source code in the C, C++, and Python computing languages. ( State charts signifies graphical descriptions of states and state transitions of a spacecraft or other complex system.) The UML representations constituting the input to this program are generated by using a UML-compliant graphical design program to draw the state charts. The generated source code is consistent with the "quantum programming" approach, which is so named because it involves discrete states and state transitions that have features in common with states and state transitions in quantum mechanics. Quantum programming enables efficient implementation of state charts, suitable for real-time embedded flight software. In addition to source code, the autocoder program generates a graphical-user-interface (GUI) program that, in turn, generates a display of state transitions in response to events triggered by the user. The GUI program is wrapped around, and can be used to exercise the state-chart behavior of, the generated source code. Once the expected state-chart behavior is confirmed, the generated source code can be augmented with a software interface to the rest of the software with which the source code is required to interact.

Economic Statistical Design of Integrated X-bar-S Control Chart with Preventive Maintenance and General Failure Distribution

PubMed Central

Caballero Morales, Santiago Omar

2013-01-01

The application of Preventive Maintenance (PM) and Statistical Process Control (SPC) are important practices to achieve high product quality, small frequency of failures, and cost reduction in a production process. However there are some points that have not been explored in depth about its joint application. First, most SPC is performed with the X-bar control chart which does not fully consider the variability of the production process. Second, many studies of design of control charts consider just the economic aspect while statistical restrictions must be considered to achieve charts with low probabilities of false detection of failures. Third, the effect of PM on processes with different failure probability distributions has not been studied. Hence, this paper covers these points, presenting the Economic Statistical Design (ESD) of joint X-bar-S control charts with a cost model that integrates PM with general failure distribution. Experiments showed statistically significant reductions in costs when PM is performed on processes with high failure rates and reductions in the sampling frequency of units for testing under SPC. PMID:23527082

Clinical growth charts for pre-school children.

PubMed

Al-Amoud, Maysoon M; Al-Mazrou, Yagob Y; El-Gizouli, Sirrag E; Khoja, Tawfik A; Al-Turki, Khalid A

2004-11-01

Growth standards are indicators for normal growth of the children and growth charts are important tools for their growth monitoring. Children from different populations are different in their growth pattern, it is important to create national standards for the growth of children in each population to develop local growth charts, and since these were not available in the Kingdom of Saudi Arabia (KSA), the aim of this study was to construct national growth standards and to develop growth charts for 0-5-years Saudi children. A cross-sectional study following World Health Organization (WHO) criteria in determining sample size was adopted, where by 24000 children from 5 regions in the KSA were selected during the period 1992 to 1995 to be the desired sample. One hundred and two Primary Health Care centers (PHCCs) were selected randomly from the 5 regions, from where the sample was drawn, and a special questionnaire was designed. Weight, height and head circumference were measured by standard procedures. The total number of children examined was 23821 (11913 boys and 11908 girls). Saudi (0-5-years) boys weight and height for age measurements were significantly different from girls. The same difference was found between urban and rural boys and girls and between boys and girls from the different regions of the country (p<0.05). These national standards derived from this study were used to develop national growth charts that are currently utilized to monitor growth in all Saudi health institutes.

Superconductive ADC Project Fabrication Package. Final Design Review Package (Briefing Charts)

DTIC Science & Technology

2010-09-07

Simulation Results Iin 1.45mV 2.5Ω 1pH 4pH 100fF 310uA 1fΩ Ic = 300uA Rn = 0.8Ω Cs = 0.32pF Ic = 300uA Rn = 0.8Ω Cs = 0.32pF Iin Vout Vout Ic = 500uA Rn...0.55Ω Cs = 0.32pF ONR Superconductive ADC CLIN/SLIN 0001AD September 2010, Brad Perranoski Pg. 17 Modulator Design Documentation Comparator Design...Comparator Design - Cadence Schematic & Simulation Comparator Testbench Simulation Results 1.45mV 2.5Ω 1pH 4pH 100fF 310uA 1fΩSine wave 100uApk Iin Ic

21 CFR 113.40 - Equipment and procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the processing temperature. Each chart shall have a working scale of not more than 55 °F per inch.... Each chart shall have a working scale of not more than 55 °F per inch within a range of 20 °F of the.... Each chart shall have a working scale of not more than 55 °F per inch within a range of 20 °F of the...

Flowcharting with D-charts

NASA Technical Reports Server (NTRS)

Meyer, D.

1985-01-01

A D-Chart is a style of flowchart using control symbols highly appropriate to modern structured programming languages. The intent of a D-Chart is to provide a clear and concise one-for-one mapping of control symbols to high-level language constructs for purposes of design and documentation. The notation lends itself to both high-level and code-level algorithmic description. The various issues that may arise when representing, in D-Chart style, algorithms expressed in the more popular high-level languages are addressed. In particular, the peculiarities of mapping control constructs for Ada, PASCAL, FORTRAN 77, C, PL/I, Jovial J73, HAL/S, and Algol are discussed.

Flowcharting with D-charts

NASA Technical Reports Server (NTRS)

Meyer, D. D.

1985-01-01

A D-Chart is a style of flowchart using control symbols highly appropriate to modern structured programming languages. The intent of a D-Chart is to provide a clear and concise one-for-one mapping of control symbols to high-level language constructs for purposes of design and documentation. The notation lends itself to both high-level and code-level algorithmic description. The various issues that may arise when representing, in D-Chart style, algorithms expressed in the more popular high-level languages are addressed. In particular, the peculiarities of mapping control constructs for Ada, PASCAL, FORTRAN 77, C, PL/I, Joviai J73, HAL/S, and Algol are discussed.

Concordance of chart and billing data with direct observation in dental practice.

PubMed

Demko, Catherine A; Victoroff, Kristin Zakariasen; Wotman, Stephen

2008-10-01

The commonly used methods of chart review, billing data summaries and practitioner self-reporting have not been examined for their ability to validly and reliably represent time use and service delivery in routine dental practice. A more thorough investigation of these data sources would provide insight into the appropriateness of each approach for measuring various clinical behaviors. The aim of this study was to assess the validity of commonly used methods such as dental chart review, billing data, or practitioner self-report compared with a 'gold standard' of information derived from direct observation of routine dental visits. A team of trained dental hygienists directly observed 3751 patient visits in 120 dental practices and recorded the behaviors and procedures performed by dentists and hygienists during patient contact time. Following each visit, charts and billing records were reviewed for the performed and billed procedures. Dental providers characterized their frequency of preventive service delivery through self-administered surveys. We standardized the observation and abstraction methods to obtain optimal measures from each of the multiple data sources. Multi-rater kappa coefficients were computed to monitor standardization, while sensitivity, specificity, and kappa coefficients were calculated to compare the various data sources with direct observation. Chart audits were more sensitive than billing data for all observed procedures and demonstrated higher agreement with directly observed data. Chart and billing records were not sensitive for several prevention-related tasks (oral cancer screening and oral hygiene instruction). Provider self-reports of preventive behaviors were always over-estimated compared with direct observation. Inter-method reliability kappa coefficients for 13 procedures ranged from 0.197 to 0.952. These concordance findings suggest that strengths and weaknesses of data collection sources should be considered when investigating

Design, evaluation and test of an electronic, multivariable control for the F100 turbofan engine

NASA Technical Reports Server (NTRS)

Skira, C. A.; Dehoff, R. L.; Hall, W. E., Jr.

1980-01-01

A digital, multivariable control design procedure for the F100 turbofan engine is described. The controller is based on locally linear synthesis techniques using linear, quadratic regulator design methods. The control structure uses an explicit model reference form with proportional and integral feedback near a nominal trajectory. Modeling issues, design procedures for the control law and the estimation of poorly measured variables are presented.

The construction of control chart for PM10 functional data

NASA Astrophysics Data System (ADS)

Shaadan, Norshahida; Jemain, Abdul Aziz; Deni, Sayang Mohd

2014-06-01

In this paper, a statistical procedure to construct a control chart for monitoring air quality (PM10) using functional data is proposed. A set of daily indices that represent the daily PM10 curves were obtained using Functional Principal Component Analysis (FPCA). By means of an iterative charting procedure, a reference data set that represented a stable PM10 process was obtained. The data were then used as a reference for monitoring future data. The application of the procedure was conducted using seven-year (2004-2010) period of recorded data from the Klang air quality monitoring station located in the Klang Valley region of Peninsular Malaysia. The study showed that the control chart provided a useful visualization tool for monitoring air quality and was capable in detecting abnormality in the process system. As in the case of Klang station, the results showed that with reference to 2004-2008, the air quality (PM10) in 2010 was better than that in 2009.

Design and application of process control charting methodologies to gamma irradiation practices

NASA Astrophysics Data System (ADS)

Saylor, M. C.; Connaghan, J. P.; Yeadon, S. C.; Herring, C. M.; Jordan, T. M.

2002-12-01

The relationship between the contract irradiation facility and the customer has historically been based upon a "PASS/FAIL" approach with little or no quality metrics used to gage the control of the irradiation process. Application of process control charts, designed in coordination with mathematical simulation of routine radiation processing, can provide a basis for understanding irradiation events. By using tools that simulate the physical rules associated with the irradiation process, end-users can explore process-related boundaries and the effects of process changes. Consequently, the relationship between contractor and customer can evolve based on the derived knowledge. The resulting level of mutual understanding of the irradiation process and its resultant control benefits both the customer and contract operation, and provides necessary assurances to regulators. In this article we examine the complementary nature of theoretical (point kernel) and experimental (dosimetric) process evaluation, and the resulting by-product of improved understanding, communication and control generated through the implementation of effective process control charting strategies.

76 FR 53530 - Government/Industry Aeronautical Charting Forum Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-26

... Charting Forum Meeting AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of public meeting...) Aeronautical Charting Forum (ACF) to discuss informational content and design of aeronautical charts and... Charting Forum to be held from October 25 through October 27, 2011, from 8:30 a.m. to 5 p.m. at FAA AeroNav...

Clinical user experiences of observation and response charts: focus group findings of using a new format chart incorporating a track and trigger system.

PubMed

Elliott, Doug; Allen, Emily; Perry, Lin; Fry, Margaret; Duffield, Christine; Gallagher, Robyn; Iedema, Rick; McKinley, Sharon; Roche, Michael

2015-01-01

Optimising clinical responses to deteriorating patients is an international indicator of acute healthcare quality. Observation charts incorporating track and trigger systems are an initiative to improve early identification and response to clinical deterioration. A suite of track and trigger 'Observation and Response Charts' were designed in Australia and initially tested in simulated environments. This paper reports initial clinical user experiences and views following implementation of these charts in adult general medical-surgical wards. Across eight trial sites, 44 focus groups were conducted with 218 clinical ward staff, mostly nurses, who received training and had used the charts in routine clinical practice for the preceding 2-6 weeks. Transcripts of audio recordings were analysed for emergent themes using an inductive approach. In this exploration of initial user experiences, key emergent themes were: tensions between vital sign 'ranges versus precision' to support decision making; using a standardised 'generalist chart in a range of specialist practice' areas; issues of 'clinical credibility', 'professional autonomy' and 'influences of doctors' when communicating abnormal signs; and 'permission and autonomy' when escalating care according to the protocol. Across themes, participants presented a range of positive, negative or mixed views. Benefits were identified despite charts not always being used up to their optimal design function. Participants reported tensions between chart objectives and clinical practices, revealing mismatches between design characteristics and human staff experiences. Overall, an initial view of 'increased activity/uncertain benefit' was uncovered. Findings particularly reinforced the significant influences of organisational work-based cultures, disciplinary boundaries and interdisciplinary communication on implementation of this new practice chart. Optimal use of all chart design characteristics will be possible when these

Synthetic-Type Control Charts for Time-Between-Events Monitoring

PubMed Central

Yen, Fang Yen; Chong, Khoo Michael Boon; Ha, Lee Ming

2013-01-01

This paper proposes three synthetic-type control charts to monitor the mean time-between-events of a homogenous Poisson process. The first proposed chart combines an Erlang (cumulative time between events, Tr) chart and a conforming run length (CRL) chart, denoted as Synth-Tr chart. The second proposed chart combines an exponential (or T) chart and a group conforming run length (GCRL) chart, denoted as GR-T chart. The third proposed chart combines an Erlang chart and a GCRL chart, denoted as GR-Tr chart. By using a Markov chain approach, the zero- and steady-state average number of observations to signal (ANOS) of the proposed charts are obtained, in order to evaluate the performance of the three charts. The optimal design of the proposed charts is shown in this paper. The proposed charts are superior to the existing T chart, Tr chart, and Synth-T chart. As compared to the EWMA-T chart, the GR-T chart performs better in detecting large shifts, in terms of the zero- and steady-state performances. The zero-state Synth-T4 and GR-Tr (r = 3 or 4) charts outperform the EWMA-T chart for all shifts, whereas the Synth-Tr (r = 2 or 3) and GR-T 2 charts perform better for moderate to large shifts. For the steady-state process, the Synth-Tr and GR-Tr charts are more efficient than the EWMA-T chart in detecting small to moderate shifts. PMID:23755231

An Improved Qualitative Analysis Procedure for Aluminum Subgroup Cations.

ERIC Educational Resources Information Center

Kistner, C. R.; Robinson, Patricia J.

1983-01-01

Describes a procedure for the qualitative analysis of aluminum subgroup cations designed to avoid failure to obtain lead or barium chromate precipitates or failure to report aluminum hydroxide when present (due to staining). Provides a flow chart and step-by-step explanation for the new procedure, indicating significantly improved student results.…

Diagrams: A Visual Survey of Graphs, Maps, Charts and Diagrams for the Graphic Designer.

ERIC Educational Resources Information Center

Lockwood, Arthur

Since the ultimate success of any diagram rests in its clarity, it is important that the designer select a method of presentation which will achieve this aim. He should be aware of the various ways in which statistics can be shown diagrammatically, how information can be incorporated in maps, and how events can be plotted in chart or graph form.…

Evaluation of a technique to simplify depictions of visually complex aeronautical procedures for NextGen

DOT National Transportation Integrated Search

2013-10-04

Performance based navigation supports the design of more precise flight procedures. However, these new procedures can be visually complex, which may impact the usability of charts that depict the procedures. The purpose of the study was to evaluate w...

Estimation of F-3 and F-4 knock-limited performance ratings for ternary and quaternary blends containing triptane or other high-antiknock aviation-fuel blending agents

NASA Technical Reports Server (NTRS)

Barnett, Henry C

1948-01-01

Charts are presented that permit the estimation of F-3 and F-4 knock-limited performance ratings for certain ternary and quaternary fuel blends. Ratings for various ternary and quaternary blends estimated from these charts compare favorably with experimental F-3 and F-4 ratings. Because of the unusual behavior of some of the aromatic blends in the F-3 engine, the charts for aromatic-paraffinic blends are probably less accurate than the charts for purely paraffinic blends.

Direct-reading design charts for 75S-T6 aluminum-alloy flat compression panels having longitudinal extruded Z-section stiffeners

NASA Technical Reports Server (NTRS)

Hickman, William A; Dow, Norris F

1951-01-01

Direct-reading design charts are presented for 75S-T6 aluminum-alloy flat compression panels having longitudinal extruded Z-section stiffeners. These charts, which cover a wide range of proportions, make possible the direct determination of the stress and all panel dimensions required to carry a given intensity of loading with a given skin thickness and effective length of panel.

Current Issues in the Design and Information Content of Instrument Approach Charts

DOT National Transportation Integrated Search

1995-03-01

This report documents an analysis and interview effort conducted to identify common operational errors made using : current Instrument Approach Plates (IAP), Standard Terminal Arrival Route (STAR) charts. Standard Instrument Departure : (SID) charts,...

Dental Charting. Learning Activities, Unit Tests, Progress Chart, and Work Sheet.

ERIC Educational Resources Information Center

Texas Univ., Austin. Center for Occupational Curriculum Development.

These materials are part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. These student materials, designed to be used with the Dental Charting Student Manual, consist of learning activities, unit…

75 FR 11225 - Government/Industry Aeronautical Charting Forum Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-10

... Charting Forum Meeting AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of public meeting...) Government/Industry Aeronautical Charting Forum (ACF 10-01) to discuss informational content and design of... Aeronautical Charting Forum to be held from April 27 through April 29, 2010 from 8:30 a.m. to 5 p.m. at the Air...

Software tool for physics chart checks.

PubMed

Li, H Harold; Wu, Yu; Yang, Deshan; Mutic, Sasa

2014-01-01

Physics chart check has long been a central quality assurance (QC) measure in radiation oncology. The purpose of this work is to describe a software tool that aims to accomplish simplification, standardization, automation, and forced functions in the process. Nationally recognized guidelines, including American College of Radiology and American Society for Radiation Oncology guidelines and technical standards, and the American Association of Physicists in Medicine Task Group reports were identified, studied, and summarized. Meanwhile, the reported events related to physics chart check service were analyzed using an event reporting and learning system. A number of shortfalls in the chart check process were identified. To address these problems, a software tool was designed and developed under Microsoft. Net in C# to hardwire as many components as possible at each stage of the process. The software consists of the following 4 independent modules: (1) chart check management; (2) pretreatment and during treatment chart check assistant; (3) posttreatment chart check assistant; and (4) quarterly peer-review management. The users were a large group of physicists in the author's radiation oncology clinic. During over 1 year of use the tool has proven very helpful in chart checking management, communication, documentation, and maintaining consistency. The software tool presented in this work aims to assist physicists at each stage of the physics chart check process. The software tool is potentially useful for any radiation oncology clinics that are either in the process of pursuing or maintaining the American College of Radiology accreditation.

Designing Flightdeck Procedures: Literature Resources

NASA Technical Reports Server (NTRS)

Feldman, Jolene; Barshi, Immanuel; Degani, Asaf; Loukopoulou, Loukia; Mauro, Robert

2017-01-01

This technical publication contains the titles, abstracts, summaries, descriptions, and/or annotations of available literature sources on procedure design and development, requirements, and guidance. It is designed to provide users with an easy access to available resources on the topic of procedure design, and with a sense of the contents of these sources. This repository of information is organized into the following publication sources: Research (e.g., journal articles, conference proceedings), Manufacturers' (e.g., operation manuals, newsletters), and Regulatory and/or Government (e.g., advisory circulars, reports). An additional section contains synopses of Accident/Incident Reports involving procedures. This work directly supports a comprehensive memorandum by Barshi, Mauro, Degani, & Loukopoulou (2016) that summarizes the results of a multi-year project, partially funded by the FAA, to develop technical reference materials that support guidance on the process of developing cockpit procedures (see "Designing Flightdeck Procedures" https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20160013263.pdf). An extensive treatment of this topic is presented in a forthcoming book by the same authors.

Construction and validation of a Tamil logMAR chart.

PubMed

Varadharajan, Srinivasa; Srinivasan, Krithica; Kumaresan, Brindha

2009-09-01

To design, construct and validate a new Tamil logMAR visual acuity chart based on current recommendations. Ten Tamil letters of equal legibility were identified experimentally and were used in the chart. Two charts, one internally illuminated and one externally illuminated, were constructed for testing at 4 m distance. The repeatability of the two charts was tested. For validation, the two charts were compared with a standard English logMAR chart (ETDRS). When compared to the ETDRS chart, a difference of 0.06 +/- 0.07 and 0.07 +/- 0.07 logMAR was found for the internally and externally illuminated charts respectively. Limits of agreement between the internally illuminated Tamil logMAR chart and ETDRS chart were found to be (-0.08, 0.19), and (-0.07, 0.20) for the externally illuminated chart. The test - retest results showed a difference of 0.02 +/- 0.04 and 0.02 +/- 0.06 logMAR for the internally and externally illuminated charts respectively. Limits of agreement for repeated measurements for the internally illuminated Tamil logMAR chart were found to be (-0.06, 0.10), and (-0.10, 0.14) for the externally illuminated chart. The newly constructed Tamil logMAR charts have good repeatability. The difference in visual acuity scores between the newly constructed Tamil logMAR chart and the standard English logMAR chart was within acceptable limits. This new chart can be used for measuring visual acuity in the literate Tamil population.

Automatic Exposure Control Systems Designed to Maintain Constant Image Noise: Effects on Computed Tomography Dose and Noise Relative to Clinically Accepted Technique Charts

PubMed Central

Favazza, Christopher P.; Yu, Lifeng; Leng, Shuai; Kofler, James M.; McCollough, Cynthia H.

2015-01-01

Objective To compare computed tomography dose and noise arising from use of an automatic exposure control (AEC) system designed to maintain constant image noise as patient size varies with clinically accepted technique charts and AEC systems designed to vary image noise. Materials and Methods A model was developed to describe tube current modulation as a function of patient thickness. Relative dose and noise values were calculated as patient width varied for AEC settings designed to yield constant or variable noise levels and were compared to empirically derived values used by our clinical practice. Phantom experiments were performed in which tube current was measured as a function of thickness using a constant-noise-based AEC system and the results were compared with clinical technique charts. Results For 12-, 20-, 28-, 44-, and 50-cm patient widths, the requirement of constant noise across patient size yielded relative doses of 5%, 14%, 38%, 260%, and 549% and relative noises of 435%, 267%, 163%, 61%, and 42%, respectively, as compared with our clinically used technique chart settings at each respective width. Experimental measurements showed that a constant noise–based AEC system yielded 175% relative noise for a 30-cm phantom and 206% relative dose for a 40-cm phantom compared with our clinical technique chart. Conclusions Automatic exposure control systems that prescribe constant noise as patient size varies can yield excessive noise in small patients and excessive dose in obese patients compared with clinically accepted technique charts. Use of noise-level technique charts and tube current limits can mitigate these effects. PMID:25938214

Automatic exposure control systems designed to maintain constant image noise: effects on computed tomography dose and noise relative to clinically accepted technique charts.

PubMed

Favazza, Christopher P; Yu, Lifeng; Leng, Shuai; Kofler, James M; McCollough, Cynthia H

2015-01-01

To compare computed tomography dose and noise arising from use of an automatic exposure control (AEC) system designed to maintain constant image noise as patient size varies with clinically accepted technique charts and AEC systems designed to vary image noise. A model was developed to describe tube current modulation as a function of patient thickness. Relative dose and noise values were calculated as patient width varied for AEC settings designed to yield constant or variable noise levels and were compared to empirically derived values used by our clinical practice. Phantom experiments were performed in which tube current was measured as a function of thickness using a constant-noise-based AEC system and the results were compared with clinical technique charts. For 12-, 20-, 28-, 44-, and 50-cm patient widths, the requirement of constant noise across patient size yielded relative doses of 5%, 14%, 38%, 260%, and 549% and relative noises of 435%, 267%, 163%, 61%, and 42%, respectively, as compared with our clinically used technique chart settings at each respective width. Experimental measurements showed that a constant noise-based AEC system yielded 175% relative noise for a 30-cm phantom and 206% relative dose for a 40-cm phantom compared with our clinical technique chart. Automatic exposure control systems that prescribe constant noise as patient size varies can yield excessive noise in small patients and excessive dose in obese patients compared with clinically accepted technique charts. Use of noise-level technique charts and tube current limits can mitigate these effects.

The international child growth chart.

PubMed

Chauliac, M

1986-01-01

This technical note describes and explains growth charts and their use, including growth charts for illustrative purposes. Growth charts provide a graphic representation of simple anthropometric measurements (weight and height). Thus, they provide better information on the health and nutritional status of children, as well as their evolution with time, for health workers and families. If anthropometric measurements are made regularly and noted on the card, health workers trained in the interpretation of curves established on the basis of these measurements then are able to make the appropriate decisions so as to ensure harmonious physical development for children. These charts also are a tool for the health education of families. Many experiments have shown that mothers who are illiterate are able to comprehend the meaning of the direction taken by a growth curve and then are more receptive to health education. Curves are useful at the individual level for the early detection of any anomaly in growth. At the collective level, the series of curves drawn for a group of children should be analyzed in order to follow growth in the group and to evaluate the impact of actions undertaken to improve the children's health status. In 1978, the World Health Organization (WHO) created a model chart, which may be adapted and reproduced by any country. No great financial investment or complicated material is necessary. The chart should be approximately 210 mm x 297 mm in size and be made of sufficiently thick cardboard to last 5 years. A protective plastic envelope of appropriate size to contain and protect the card is preferable. The model is composed of 2 elements: a chart for boys and a chart for girls. The 1st page includes some information on civil status, useful for finding the chart and for obtaining some idea of the health status of siblings. The dates of vaccination are listed at the bottom of the page. The inner side of the card contains the curves for weight and

Pilot identification of symbols and an exploration of symbol design issues for electronic displays of aeronautical charting information

DOT National Transportation Integrated Search

2007-06-01

This report describes a study designed to address four research questions about symbology for electronic displays of charting information. The main research question was whether pilots could identify a set of test symbols. Three other research questi...

A DNA-Based Procedure for In Planta Detection of Fusarium oxysporum f. sp. phaseoli.

PubMed

Alves-Santos, Fernando M; Ramos, Brisa; García-Sánchez, M Asunción; Eslava, Arturo P; Díaz-Mínguez, José María

2002-03-01

ABSTRACT We have characterized strains of Fusarium oxysporum from common bean fields in Spain that were nonpathogenic on common bean, as well as F. oxysporum strains (F. oxysporum f. sp. phaseoli) pathogenic to common bean by random amplified polymorphic DNA (RAPD) analysis. We identified a RAPD marker (RAPD 4.12) specific for the highly virulent pathogenic strains of the seven races of F. oxysporum f. sp. phaseoli. Sequence analysis of RAPD 4.12 allowed the design of oligonucleotides that amplify a 609-bp sequence characterized amplified region (SCAR) marker (SCAR-B310A280). Under controlled environmental and greenhouse conditions, detection of the pathogen by polymerase chain reaction was 100% successful in root samples of infected but still symptomless plants and in stem samples of plants with disease severity of >/=4 in the Centro Internacional de Agricultura Tropical (CIAT; Cali, Colombia) scale. The diagnostic procedure can be completed in 5 h and allows the detection of all known races of the pathogen in plant samples at early stages of the disease with no visible symptoms.

40 CFR 86.343-79 - Chart reading.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Gasoline-Fueled and Diesel-Fueled Heavy-Duty Engines; Gaseous Exhaust Test Procedures § 86.343-79 Chart... responses corresponding to the end of each mode. (c) For gasoline-fueled engines, determine whether the test... gasoline-fueled engine mode); or (3) 5 percent of maximum torque during the remainder of the mode...

40 CFR 86.343-79 - Chart reading.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Gasoline-Fueled and Diesel-Fueled Heavy-Duty Engines; Gaseous Exhaust Test Procedures § 86.343-79 Chart... responses corresponding to the end of each mode. (c) For gasoline-fueled engines, determine whether the test... gasoline-fueled engine mode); or (3) 5 percent of maximum torque during the remainder of the mode...

Construction and validation of logMAR visual acuity charts in seven Indian languages.

PubMed

Negiloni, Kalpa; Mazumdar, Deepmala; Neog, Aditya; Das, Biman; Medhi, Jnanankar; Choudhury, Mitalee; George, Ronnie Jacob; Ramani, Krishna Kumar

2018-05-01

The evaluation of visual impairment requires the measurement of visual acuity with a validated and standard logMAR visual acuity chart. We aimed to construct and validate new logMAR visual acuity chart in Indian languages (Hindi, Bengali, Telugu, Urdu, Kannada, Malayalam, and Assamese). The commonly used font in each language was chosen as the reference and designed to fit the 5 × 5 grid (Adobe Photoshop). Ten letters (easiest to difficult) around median legibility score calculated for each language based on the results of legibility experiment and differing by 10% were selected. The chart was constructed based on the standard recommendations. The repeatability of charts was tested and also compared with a standard English Early Treatment Diabetic Retinopathy Study (ETDRS) logMAR chart for validation. A total of 14 rows (1.0 to -0.3 logMAR) with five letters in each line were designed with the range of row legibility between 4.7 and 5.3 for all the language charts. Each chart showed good repeatability, and a maximum difference of four letters was noted. The median difference in visual acuity was 0.16 logMAR for Urdu and Assamese chart compared to ETDRS English chart. Hindi and Malayalam chart had a median difference of 0.12 logMAR. When compared to the English chart a median difference of 0.14 logMAR was noted in Telugu, Kannada, and Bengali chart. The newly developed Indian language visual acuity charts are designed based on the standard recommendations and will help to assess visual impairment in people of these languages across the country.

Effects of trimming weight-for-height data on growth-chart percentiles1–3

PubMed Central

Flegal, Katherine M; Carroll, Margaret D; Ogden, Cynthia L

2016-01-01

Background Before estimating smoothed percentiles of weight-for-height and BMI-for-age to construct the WHO growth charts, WHO excluded observations that were considered to represent unhealthy weights for height. Objective The objective was to estimate the effects of similar data trimming on empirical percentiles from the CDC growth-chart data set relative to the smoothed WHO percentiles for ages 24–59 mo. Design We used the nationally representative US weight and height data from 1971 to 1994, which was the source data for the 2000 CDC growth charts. Trimming cutoffs were calculated on the basis of weight-for-height for 9722 children aged 24–71 mo. Empirical percentiles for 7315 children aged 24–59 mo were compared with the corresponding smoothed WHO percentiles. Results Before trimming, the mean empirical percentiles for weight-for-height in the CDC data set were higher than the corresponding smoothed WHO percentiles. After trimming, the mean empirical 95th and 97th percentiles of weight-for-height were lower than the WHO percentiles, and the proportion of children in the CDC data set above the WHO 95th percentile decreased from 7% to 5%. The findings were similar for BMI-for-age. However, for weight-for-age, which had not been trimmed by the WHO, the empirical percentiles before trimming agreed closely with the upper percentiles from the WHO charts. Conclusion WHO data-trimming procedures may account for some of the differences between the WHO growth charts and the 2000 CDC growth charts. PMID:22990032

78 FR 65418 - Order 1050.1F Environmental Impacts: Policies and Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

...: Policies and Procedures AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice requesting comment on proposed Order 1050.1F Environmental Impacts: Policies and Procedures; Re-Opening of Comment..., Environmental Impacts: Policies and Procedures that was published on August 14, 2013. Airports Council...

Simplification and Transformation of ASTM F1292 Measurement Procedure for Fall Accident Injury Criteria

PubMed Central

KATO, Maki; SHIMODAIRA, Yoshie; SATO, Takeshi; IIDA, Hiromi

2014-01-01

Abstract: Protecting children from injuries caused by fall accidents from playground equipment is important. Therefore, measures toward minimizing the risk of fall accident injuries are required. The risk of injury can be evaluated using ASTM F1292. In this test, G-max and the HIC are used to estimate the risk of injury. However, the measurement procedure is too complicated for application to a large number of installed equipment. F1292 requires simplified by reducing the number of phases, even with a small risk of loss in accuracy. With this in mind, this study proposes a shortened measurement procedure and a transformation equation to estimate the risk as same as F1292. As the result of experiments, it was revealed that G-max and the HIC values for both procedures linearly increase with drop height. The differences in outcomes between the regression equations of the standardized procedure and those of the shortened procedure can be used as a correction value. They can be added to the value measured by the shortened procedure. This suggests that the combination of the shortened procedure and transformation equation would be equivalent to F1292, with the advantage of being more easily and efficiently applied to the evaluation of installed playground equipment. PMID:25088989

Simplification and transformation of ASTM F1292 measurement procedure for fall accident injury criteria.

PubMed

Kato, Maki; Shimodaira, Yoshie; Sato, Takeshi; Iida, Hiromi

2014-01-01

Protecting children from injuries caused by fall accidents from playground equipment is important. Therefore, measures toward minimizing the risk of fall accident injuries are required. The risk of injury can be evaluated using ASTM F1292. In this test, G-max and the HIC are used to estimate the risk of injury. However, the measurement procedure is too complicated for application to a large number of installed equipment. F1292 requires simplified by reducing the number of phases, even with a small risk of loss in accuracy. With this in mind, this study proposes a shortened measurement procedure and a transformation equation to estimate the risk as same as F1292. As the result of experiments, it was revealed that G-max and the HIC values for both procedures linearly increase with drop height. The differences in outcomes between the regression equations of the standardized procedure and those of the shortened procedure can be used as a correction value. They can be added to the value measured by the shortened procedure. This suggests that the combination of the shortened procedure and transformation equation would be equivalent to F1292, with the advantage of being more easily and efficiently applied to the evaluation of installed playground equipment.

Electronic growth charts: watching our patients grow.

PubMed

Murphy, Cynthia A; Carstens, Kimberly; Villamayor, Precy

2005-01-01

Pediatric Growth Charts have been used in the pediatric community since 1977. The first growth charts were developed by the National Center for Health Statistics as a clinical tool for health care professionals. The growth charts, revised in 2000, by the Center for Disease Control consists of a series of percentile curves for selected body measurements in children [1]. Capitalizing on the benefits of our Electronic Medical Record (EMR), and as a byproduct of nursing electronic documentation of routine heights, weights, and frontal occipital circumferences, our system plots the routine measurements without additional intervention by the staff. Clinicians can view the graphs online or generate printed reports as needed during routine examination for outpatient or hospitalized care. This abstract outlines the background, design process, programming rules utilized to plot growth curves, and the evaluation of the electronic CDC growth charts in our organization.

Relative Efficiencies and Design Charts for Various Engine-Propeller Combinations, Special Report

NASA Technical Reports Server (NTRS)

Biermann, David

1936-01-01

The relative efficiencies of various engine-propeller combinations were the subject of a study that covered the important flight conditions, particularly the take-off. Design charts that graphically correlate the various propeller parameters were prepared to facilitate the solution of problems and also to c1arify the conception of the relationships of the various engine-propeller design factors. It is shown that, among the many methods for improving the take-off thrust, the use of high-pitch, large-diameter controllable propellers turning at low rotational speeds is probably the most generally promising. With such a combination the take-off thrust may be further increased, at the expense of a small loss in cruising efficiency, by compromise designs wherein the pitch setting is slightly reduced and the diameter is further increased. The degree of compromise necessary to accomplish the maximum possible take-off improvement depends on such design factors as overspeeding and overboosting at take-off as well as depending on the design altitude. Both overspeeding and designing for altitude operation have the same effect on the take-off thrust as compromising in that the propulsive efficiency is increased thereby; boosting the engine, however, has the reverse effect on the propulsive efficiency, although the brake horsepower is increased.

Automatic Extraction of High-Resolution Rainfall Series from Rainfall Strip Charts

NASA Astrophysics Data System (ADS)

Saa-Requejo, Antonio; Valencia, Jose Luis; Garrido, Alberto; Tarquis, Ana M.

2015-04-01

Soil erosion is a complex phenomenon involving the detachment and transport of soil particles, storage and runoff of rainwater, and infiltration. The relative magnitude and importance of these processes depends on a host of factors, including climate, soil, topography, cropping and land management practices among others. Most models for soil erosion or hydrological processes need an accurate storm characterization. However, this data are not always available and in some cases indirect models are generated to fill this gap. In Spain, the rain intensity data known for time periods less than 24 hours back to 1924 and many studies are limited by it. In many cases this data is stored in rainfall strip charts in the meteorological stations but haven't been transfer in a numerical form. To overcome this deficiency in the raw data a process of information extraction from large amounts of rainfall strip charts is implemented by means of computer software. The method has been developed that largely automates the intensive-labour extraction work based on van Piggelen et al. (2011). The method consists of the following five basic steps: 1) scanning the charts to high-resolution digital images, 2) manually and visually registering relevant meta information from charts and pre-processing, 3) applying automatic curve extraction software in a batch process to determine the coordinates of cumulative rainfall lines on the images (main step), 4) post processing the curves that were not correctly determined in step 3, and 5) aggregating the cumulative rainfall in pixel coordinates to the desired time resolution. A colour detection procedure is introduced that automatically separates the background of the charts and rolls from the grid and subsequently the rainfall curve. The rainfall curve is detected by minimization of a cost function. Some utilities have been added to improve the previous work and automates some auxiliary processes: readjust the bands properly, merge bands when

The Uniform Chart of Accounts and Its Use in Management Control.

DTIC Science & Technology

1982-10-01

accounting reports [Ref. 10: p.45]. Horngren [Ref. 5: p. 162] notes that a common complaint of *, managers is that they are unfairly charged with costs ...aids of amsst 0W somir IM WOR M oo Owp U CA Hospital Management Control Uniform Chart of Accounts Performance Measurement Hospital Cost Accounting ...Output Measurement HCU 30. he.T ACT fCamnnus m .. s ado It 09000*Min d IdWOReeO 661 eammeei ~Full implementation of thc Uniform Chart of Accounts (UCA

Growth chart

MedlinePlus

... while standing up in children over age 3) Head circumference , a measurement of the head size taken by ... carefully. Alternative Names Height and weight chart Images Head circumference Height/weight chart References Cooke DW, Dival SA, ...

Bar-Chart-Monitor System For Wind Tunnels

NASA Technical Reports Server (NTRS)

Jung, Oscar

1993-01-01

Real-time monitor system provides bar-chart displays of significant operating parameters developed for National Full-Scale Aerodynamic Complex at Ames Research Center. Designed to gather and process sensory data on operating conditions of wind tunnels and models, and displays data for test engineers and technicians concerned with safety and validation of operating conditions. Bar-chart video monitor displays data in as many as 50 channels at maximum update rate of 2 Hz in format facilitating quick interpretation.

Effects of lines of progress and semilogarithmic charts on ratings of charted data

PubMed Central

Bailey, Donald B.

1984-01-01

The extent to which interrater agreement and ratings of significance on both changes in level and trend are affected by lines of progress and semilogarithmic charts was investigated. Thirteen graduate students rated four sets of charts, each set containing 19 phase changes. Set I data were plotted on equal interval charts. In Set II a line of progress was drawn through each phase on each chart. In Set III data points were replotted on semilogarithmic charts. In Set IV a line of progress was drawn through each phase of each Set III chart. A significant main effect on interrater agreement was found for lines of progress as well as a significant 2-way interaction between lines of progress and change type. Three main effects (chart type, lines of progress, and type of change) and a significant 3-way interaction were found for ratings of significance. Implications of these data for visual analysis of charted data are discussed. PMID:16795676

On regional geomagnetic charts

USGS Publications Warehouse

Alldredge, L.R.

1987-01-01

When regional geomagnetic charts for areas roughly the size of the US were compiled by hand, some large local anomalies were displayed in the isomagnetic lines. Since the late 1960s, when the compilation of charts using computers and mathematical models was started, most of the details available in the hand drawn regional charts have been lost. One exception to this is the Canadian magnetic declination chart for 1980. This chart was constructed using a 180 degrees spherical harmonic model. -from Author

Matematicas: Nivel F (Mathematics: Level F).

ERIC Educational Resources Information Center

Duron, Dolores, Ed.; And Others

A teacher's manual was developed for an elementary level mathematics course in Spanish as part of an immersion program for English speaking children. The Level F manual is designed for grade 5 pupils. Teaching procedures, conceptual and language objectives, vocabulary, structures, and learning activities are included. Activities are designed to…

BASIC Language Flow Charting Program (BASCHART). Technical Note 3-82.

ERIC Educational Resources Information Center

Johnson, Charles C.; And Others

This document describes BASCHART, a computer aid designed to decipher and automatically flow chart computer program logic; it also provides the computer code necessary for this process. Developed to reduce the labor intensive manual process of producing a flow chart for an undocumented or inadequately documented program, BASCHART will…

Growth Charts (For Parents)

MedlinePlus

... say about a child's health. Why Do Doctors Use Growth Charts? Growth charts are a standard part ... chart, they see which percentile line those measurements land on. The higher the percentile number, the bigger ...

Fatigue design procedure for the American SST prototype

NASA Technical Reports Server (NTRS)

Doty, R. J.

1972-01-01

For supersonic airline operations, significantly higher environmental temperature is the primary new factor affecting structural service life. Methods for incorporating the influence of temperature in detailed fatigue analyses are shown along with current test indications. Thermal effects investigated include real-time compared with short-time testing, long-time temperature exposure, and stress-temperature cycle phasing. A method is presented which allows designers and stress analyzers to check fatigue resistance of structural design details. A communicative rating system is presented which defines the relative fatigue quality of the detail so that the analyst can define cyclic-load capability of the design detail by entering constant-life charts for varying detail quality. If necessary then, this system allows the designer to determine ways to improve the fatigue quality for better life or to determine the operating stresses which will provide the required service life.

Development of Markup Language for Medical Record Charting: A Charting Language.

PubMed

Jung, Won-Mo; Chae, Younbyoung; Jang, Bo-Hyoung

2015-01-01

Nowadays a lot of trials for collecting electronic medical records (EMRs) exist. However, structuring data format for EMR is an especially labour-intensive task for practitioners. Here we propose a new mark-up language for medical record charting (called Charting Language), which borrows useful properties from programming languages. Thus, with Charting Language, the text data described in dynamic situation can be easily used to extract information.

Designing Flight Deck Procedures

NASA Technical Reports Server (NTRS)

Degani, Asaf; Wiener, Earl

2005-01-01

Three reports address the design of flight-deck procedures and various aspects of human interaction with cockpit systems that have direct impact on flight safety. One report, On the Typography of Flight- Deck Documentation, discusses basic research about typography and the kind of information needed by designers of flight deck documentation. Flight crews reading poorly designed documentation may easily overlook a crucial item on the checklist. The report surveys and summarizes the available literature regarding the design and typographical aspects of printed material. It focuses on typographical factors such as proper typefaces, character height, use of lower- and upper-case characters, line length, and spacing. Graphical aspects such as layout, color coding, fonts, and character contrast are discussed; and several cockpit conditions such as lighting levels and glare are addressed, as well as usage factors such as angular alignment, paper quality, and colors. Most of the insights and recommendations discussed in this report are transferable to paperless cockpit systems of the future and computer-based procedure displays (e.g., "electronic flight bag") in aerospace systems and similar systems that are used in other industries such as medical, nuclear systems, maritime operations, and military systems.

Automatic control design procedures for restructurable aircraft control

NASA Technical Reports Server (NTRS)

Looze, D. P.; Krolewski, S.; Weiss, J.; Barrett, N.; Eterno, J.

1985-01-01

A simple, reliable automatic redesign procedure for restructurable control is discussed. This procedure is based on Linear Quadratic (LQ) design methodologies. It employs a robust control system design for the unfailed aircraft to minimize the effects of failed surfaces and to extend the time available for restructuring the Flight Control System. The procedure uses the LQ design parameters for the unfailed system as a basis for choosing the design parameters of the failed system. This philosophy alloys the engineering trade-offs that were present in the nominal design to the inherited by the restructurable design. In particular, it alloys bandwidth limitations and performance trade-offs to be incorporated in the redesigned system. The procedure also has several other desirable features. It effectively redistributes authority among the available control effectors to maximize the system performance subject to actuator limitations and constraints. It provides a graceful performance degradation as the amount of control authority lessens. When given the parameters of the unfailed aircraft, the automatic redesign procedure reproduces the nominal control system design.

Human Factors Considerations for Area Navigation Departure and Arrival Procedures

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Adams, Catherine A.

2006-01-01

Area navigation (RNAV) procedures are being implemented in the United States and around the world as part of a transition to a performance-based navigation system. These procedures are providing significant benefits and have also caused some human factors issues to emerge. Under sponsorship from the Federal Aviation Administration (FAA), the National Aeronautics and Space Administration (NASA) has undertaken a project to document RNAV-related human factors issues and propose areas for further consideration. The component focusing on RNAV Departure and Arrival Procedures involved discussions with expert users, a literature review, and a focused review of the NASA Aviation Safety Reporting System (ASRS) database. Issues were found to include aspects of air traffic control and airline procedures, aircraft systems, and procedure design. Major findings suggest the need for specific instrument procedure design guidelines that consider the effects of human performance. Ongoing industry and government activities to address air-ground communication terminology, design improvements, and chart-database commonality are strongly encouraged. A review of factors contributing to RNAV in-service errors would likely lead to improved system design and operational performance.

Dynamic probability control limits for risk-adjusted Bernoulli CUSUM charts.

PubMed

Zhang, Xiang; Woodall, William H

2015-11-10

The risk-adjusted Bernoulli cumulative sum (CUSUM) chart developed by Steiner et al. (2000) is an increasingly popular tool for monitoring clinical and surgical performance. In practice, however, the use of a fixed control limit for the chart leads to a quite variable in-control average run length performance for patient populations with different risk score distributions. To overcome this problem, we determine simulation-based dynamic probability control limits (DPCLs) patient-by-patient for the risk-adjusted Bernoulli CUSUM charts. By maintaining the probability of a false alarm at a constant level conditional on no false alarm for previous observations, our risk-adjusted CUSUM charts with DPCLs have consistent in-control performance at the desired level with approximately geometrically distributed run lengths. Our simulation results demonstrate that our method does not rely on any information or assumptions about the patients' risk distributions. The use of DPCLs for risk-adjusted Bernoulli CUSUM charts allows each chart to be designed for the corresponding particular sequence of patients for a surgeon or hospital. Copyright © 2015 John Wiley & Sons, Ltd.

(99m)Tc-MAG3 diuretic renography in diagnosis of obstructive nephropathy in adults: a comparison between F-15 and a new procedure F+10(sp) in seated position.

PubMed

Tartaglione, Girolamo; D'Addessi, Alessandro; De Waure, Chiara; Pagan, Marco; Raccioppi, Marco; Sacco, Emilio; Cadeddu, Chiara; Vittori, Matteo; Bassi, Pier Francesco; Ferretti, Alice; Al-Nahhas, Adil; Rubello, Domenico

2013-06-01

The objective of this study was to compare 2 diuretic renography procedures: F-15 versus F+10(sp) for diagnosis of obstructive uropathy in adults. Thirty-six patients with unilateral or bilateral hydronephrosis had 2 consecutive Tc-MAG3 diuretic renograms within 7 days, using the widely used procedure F-15 in supine position, and a new seated-position procedure whereby the patient drinks 400 to 500 mL of water at 5 minutes and receives an injection of 20 mg of furosemide at 10 minutes [F+10 (sp)]. F-15 showed nonobstructive results in 63.9% of kidneys, obstruction in 26.4%, and equivocal findings in 6.9% and was not applicable in 2.8%. F+10(sp) showed nonobstructive results in 70.9%, obstruction in 27.8%, and equivocal result in 1.4% of kidneys. Nephroptosis was observed by F+10(sp) in 22.2% of kidneys. Adverse effects reported for the F-15 were hypotension in 2 patients, renal colic in 3 patients, and interruption due to voiding in 5 patients. No adverse effects were reported for F+10(sp). This study shows that the F+10(sp) procedure reduces the equivocal findings of F-15 procedure in 36 patients. It can improve the accuracy and compliance, avoiding adverse effects and reducing bladder filling-related problems.

JSC Design and Procedural Standards, JSC-STD-8080

NASA Technical Reports Server (NTRS)

Punch, Danny T.

2011-01-01

This document provides design and procedural requirements appropriate for inclusion in specifications for any human spaceflight program, project, spacecraft, system, or end item. The term "spacecraft" as used in the standards includes launch vehicles, orbital vehicles, non-terrestrial surface vehicles, and modules. The standards are developed and maintained as directed by Johnson Space Center (JSC) Policy Directive JPD 8080.2, JSC Design and Procedural Standards for Human Space Flight Equipment. The Design and Procedural Standards contained in this manual represent human spacecraft design and operational knowledge applicable to a wide range of spaceflight activities. These standards are imposed on JSC human spaceflight equipment through JPD 8080.2. Designers shall comply with all design standards applicable to their design effort.

Design Considerations for IAP Charts Approach Course Track and Communication Frequencies

DOT National Transportation Integrated Search

1991-08-01

This report describes two experiments evaluating format changes on instrument approach : plates (IAPs). The study used a simple chart reading task to assess information : transfer in IAPs. : The first experiment addressed different methods of display...

Framing effects reveal discrete lexical-semantic and sublexical procedures in reading: an fMRI study

PubMed Central

Danelli, Laura; Marelli, Marco; Berlingeri, Manuela; Tettamanti, Marco; Sberna, Maurizio; Paulesu, Eraldo; Luzzatti, Claudio

2015-01-01

According to the dual-route model, a printed string of letters can be processed by either a grapheme-to-phoneme conversion (GPC) route or a lexical-semantic route. Although meta-analyses of the imaging literature support the existence of distinct but interacting reading procedures, individual neuroimaging studies that explored neural correlates of reading yielded inconclusive results. We used a list-manipulation paradigm to provide a fresh empirical look at this issue and to isolate specific areas that underlie the two reading procedures. In a lexical condition, we embedded disyllabic Italian words (target stimuli) in lists of either loanwords or trisyllabic Italian words with unpredictable stress position. In a GPC condition, similar target stimuli were included within lists of pseudowords. The procedure was designed to induce participants to emphasize either the lexical-semantic or the GPC reading procedure, while controlling for possible linguistic confounds and keeping the reading task requirements stable across the two conditions. Thirty-three adults participated in the behavioral study, and 20 further adult participants were included in the fMRI study. At the behavioral level, we found sizeable effects of the framing manipulations that included slower voice onset times for stimuli in the pseudoword frames. At the functional anatomical level, the occipital and temporal regions, and the intraparietal sulcus were specifically activated when subjects were reading target words in a lexical frame. The inferior parietal and anterior fusiform cortex were specifically activated in the GPC condition. These patterns of activation represented a valid classifying model of fMRI images associated with target reading in both frames in the multi-voxel pattern analyses. Further activations were shared by the two procedures in the occipital and inferior parietal areas, in the premotor cortex, in the frontal regions and the left supplementary motor area. These regions are most

Framing effects reveal discrete lexical-semantic and sublexical procedures in reading: an fMRI study.

PubMed

Danelli, Laura; Marelli, Marco; Berlingeri, Manuela; Tettamanti, Marco; Sberna, Maurizio; Paulesu, Eraldo; Luzzatti, Claudio

2015-01-01

According to the dual-route model, a printed string of letters can be processed by either a grapheme-to-phoneme conversion (GPC) route or a lexical-semantic route. Although meta-analyses of the imaging literature support the existence of distinct but interacting reading procedures, individual neuroimaging studies that explored neural correlates of reading yielded inconclusive results. We used a list-manipulation paradigm to provide a fresh empirical look at this issue and to isolate specific areas that underlie the two reading procedures. In a lexical condition, we embedded disyllabic Italian words (target stimuli) in lists of either loanwords or trisyllabic Italian words with unpredictable stress position. In a GPC condition, similar target stimuli were included within lists of pseudowords. The procedure was designed to induce participants to emphasize either the lexical-semantic or the GPC reading procedure, while controlling for possible linguistic confounds and keeping the reading task requirements stable across the two conditions. Thirty-three adults participated in the behavioral study, and 20 further adult participants were included in the fMRI study. At the behavioral level, we found sizeable effects of the framing manipulations that included slower voice onset times for stimuli in the pseudoword frames. At the functional anatomical level, the occipital and temporal regions, and the intraparietal sulcus were specifically activated when subjects were reading target words in a lexical frame. The inferior parietal and anterior fusiform cortex were specifically activated in the GPC condition. These patterns of activation represented a valid classifying model of fMRI images associated with target reading in both frames in the multi-voxel pattern analyses. Further activations were shared by the two procedures in the occipital and inferior parietal areas, in the premotor cortex, in the frontal regions and the left supplementary motor area. These regions are most

Modified Exponential Weighted Moving Average (EWMA) Control Chart on Autocorrelation Data

NASA Astrophysics Data System (ADS)

Herdiani, Erna Tri; Fandrilla, Geysa; Sunusi, Nurtiti

2018-03-01

In general, observations of the statistical process control are assumed to be mutually independence. However, this assumption is often violated in practice. Consequently, statistical process controls were developed for interrelated processes, including Shewhart, Cumulative Sum (CUSUM), and exponentially weighted moving average (EWMA) control charts in the data that were autocorrelation. One researcher stated that this chart is not suitable if the same control limits are used in the case of independent variables. For this reason, it is necessary to apply the time series model in building the control chart. A classical control chart for independent variables is usually applied to residual processes. This procedure is permitted provided that residuals are independent. In 1978, Shewhart modification for the autoregressive process was introduced by using the distance between the sample mean and the target value compared to the standard deviation of the autocorrelation process. In this paper we will examine the mean of EWMA for autocorrelation process derived from Montgomery and Patel. Performance to be investigated was investigated by examining Average Run Length (ARL) based on the Markov Chain Method.

On designing a new cumulative sum Wilcoxon signed rank chart for monitoring process location

PubMed Central

Nazir, Hafiz Zafar; Tahir, Muhammad; Riaz, Muhammad

2018-01-01

In this paper, ranked set sampling is used for developing a non-parametric location chart which is developed on the basis of Wilcoxon signed rank statistic. The average run length and some other characteristics of run length are used as the measures to assess the performance of the proposed scheme. Some selective distributions including Laplace (or double exponential), logistic, normal, contaminated normal and student’s t-distributions are considered to examine the performance of the proposed Wilcoxon signed rank control chart. It has been observed that the proposed scheme shows superior shift detection ability than some of the competing counterpart schemes covered in this study. Moreover, the proposed control chart is also implemented and illustrated with a real data set. PMID:29664919

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2010 CFR

2010-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2011 CFR

2011-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2013 CFR

2013-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 6 2013-07-01 2013-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2014 CFR

2014-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 6 2014-07-01 2014-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2012 CFR

2012-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 6 2012-07-01 2012-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

Mobile Phone Mood Charting for Adolescents

ERIC Educational Resources Information Center

Matthews, Mark; Doherty, Gavin; Sharry, John; Fitzpatrick, Carol

2008-01-01

Mobile phones may provide a useful and engaging platform for supporting therapeutic services working with adolescents. This paper examines the potential benefits of the mobile phone for self-charting moods in comparison to existing methods in current practice. The paper describes a mobile phone application designed by the authors which allows…

Control Charts When the Observations Are Correlated.

DTIC Science & Technology

1987-05-01

l7 D-AiB6 388 CONTROL CHARTS WHEN THE OBSERVATIONS ARE CORRELATED(J) i/iPITTSBURGH UNIV PA CENTER FOR KULTIVARIATE ANALYSIS P R KRISHNAIAH ET AL MAY... Krishnaiah and B. Q. Miao F-49620-85-C-0008 S. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA II WORK UNIT NUMBERS... Krishnaiah and B.Q. Miao Center for Multivariate Analysis University of Pittsburgh N DTIC E L 1Zk-, -I- OCT0 11987 Play 1987 Technical Report No. 87-09

[Ophthalmologic reading charts : Part 2: Current logarithmically scaled reading charts].

PubMed

Radner, W

2016-12-01

To analyze currently available reading charts regarding print size, logarithmic print size progression, and the background of test-item standardization. For the present study, the following logarithmically scaled reading charts were investigated using a measuring microscope (iNexis VMA 2520; Nikon, Tokyo): Eschenbach, Zeiss, OCULUS, MNREAD (Minnesota Near Reading Test), Colenbrander, and RADNER. Calculations were made according to EN-ISO 8596 and the International Research Council recommendations. Modern reading charts and cards exhibit a logarithmic progression of print sizes. The RADNER reading charts comprise four different cards with standardized test items (sentence optotypes), a well-defined stop criterion, accurate letter sizes, and a high print quality. Numbers and Landolt rings are also given in the booklet. The OCULUS cards have currently been reissued according to recent standards and also exhibit a high print quality. In addition to letters, numbers, Landolt rings, and examples taken from a timetable and the telephone book, sheet music is also offered. The Colenbrander cards use short sentences of 44 characters, including spaces, and exhibit inaccuracy at smaller letter sizes, as do the MNREAD cards. The MNREAD cards use sentences of 60 characters, including spaces, and have a high print quality. Modern reading charts show that international standards can be achieved with test items similar to optotypes, by using recent technology and developing new concepts of test-item standardization. Accurate print sizes, high print quality, and a logarithmic progression should become the minimum requirements for reading charts and reading cards in ophthalmology.

Control Chart on Semi Analytical Weighting

NASA Astrophysics Data System (ADS)

Miranda, G. S.; Oliveira, C. C.; Silva, T. B. S. C.; Stellato, T. B.; Monteiro, L. R.; Marques, J. R.; Faustino, M. G.; Soares, S. M. V.; Ulrich, J. C.; Pires, M. A. F.; Cotrim, M. E. B.

2018-03-01

Semi-analytical balance verification intends to assess the balance performance using graphs that illustrate measurement dispersion, trough time, and to demonstrate measurements were performed in a reliable manner. This study presents internal quality control of a semi-analytical balance (GEHAKA BG400) using control charts. From 2013 to 2016, 2 weight standards were monitored before any balance operation. This work intended to evaluate if any significant difference or bias were presented on weighting procedure over time, to check the generated data reliability. This work also exemplifies how control intervals are established.

An analysis of lateral stability in power-off flight with charts for use in design

NASA Technical Reports Server (NTRS)

Zimmerman, Charles H

1937-01-01

The aerodynamic and mass factors governing lateral stability are discussed and formulas are given for their estimation. Relatively simple relationships between the governing factors and the resulting stability characteristics are presented. A series of charts is included with which approximate stability characteristics may be rapidly estimated. The effects of the various governing factors upon the stability characteristics are discussed in detail. It is pointed out that much additional research is necessary both to correlate stability characteristics with riding, flying, and handling qualities and to provide suitable data for accurate estimates of those characteristics of an airplane while it is in the design stage.

Estimating anesthesia and surgical procedure times from medicare anesthesia claims.

PubMed

Silber, Jeffrey H; Rosenbaum, Paul R; Zhang, Xuemei; Even-Shoshan, Orit

2007-02-01

Procedure times are important variables that often are included in studies of quality and efficiency. However, due to the need for costly chart review, most studies are limited to single-institution analyses. In this article, the authors describe how well the anesthesia claim from Medicare can estimate chart times. The authors abstracted information on time of induction and entrance to the recovery room ("anesthesia chart time") from the charts of 1,931 patients who underwent general and orthopedic surgical procedures in Pennsylvania. The authors then merged the associated bills from claims data supplied from Medicare (Part B data) that included a variable denoting the time in minutes for the anesthesia service. The authors also investigated the time from incision to closure ("surgical chart time") on a subset of 1,888 patients. Anesthesia claim time from Medicare was highly predictive of anesthesia chart time (Kendall's rank correlation tau = 0.85, P < 0.0001, median absolute error = 5.1 min) but somewhat less predictive of surgical chart time (Kendall's tau = 0.73, P < 0.0001, median absolute error = 13.8 min). When predicting chart time from Medicare bills, variables reflecting procedure type, comorbidities, and hospital type did not significantly improve the prediction, suggesting that errors in predicting the chart time from the anesthesia bill time are not related to these factors; however, the individual hospital did have some influence on these estimates. Anesthesia chart time can be well estimated using Medicare claims, thereby facilitating studies with vastly larger sample sizes and much lower costs of data collection.

Evaluating a de-cluttering technique for NextGen RNAV and RNP charts

DOT National Transportation Integrated Search

2012-10-14

The authors propose a de-cluttering technique to simplify the depiction of visually complex Area Navigation (RNAV) and Required Navigation Performance (RNP) procedures by reducing the number of paths shown on a single chart page. An experiment was co...

Spectral Imaging of Portolan Charts

NASA Astrophysics Data System (ADS)

France, Fenella G.; Wilson, Meghan A.; Ghez, Anita

2018-05-01

Spectral imaging of Portolan Charts, early nautical charts, provided extensive new information about their construction and creation. The origins of the portolan chart style have been a continual source of perplexity to numerous generations of cartographic historians. The spectral imaging system utilized incorporates a 50 megapixel mono-chrome camera with light emitting diode (LED) illumination panels that cover the range from 365 nm to 1050 nm to capture visible and non-visible information. There is little known about how portolan charts evolved, and what influenced their creation. These early nautical charts began as working navigational tools of medieval mariners, initially made in the 1300s in Italy, Portugal and Spain; however the origin and development of the portolan chart remained shrouded in mystery. Questions about these early navigational charts included whether colorants were commensurate with the time period and geographical location, and if different, did that give insight into trade routes, or possible later additions to the charts? For example; spectral data showed the red pigment on both the 1320 portolan chart and the 1565 Galapagos Islands matched vermillion, an opaque red pigment used since antiquity. The construction of these charts was also of great interest. Spectral imaging with a range of illumination modes revealed the presence of a "hidden circle" often referred to in relation to their construction. This paper will present in-depth analysis of how spectral imaging of the Portolans revealed similarities and differences, new hidden information and shed new light on construction and composition.

Nanomaterial Dispersion/Dissolution Characterization: Scientific Operating Procedure SOP-F-1

DTIC Science & Technology

2016-05-01

ER D C/ EL S R- 16 -1 Environmental Consequences of Nanotechnologies Nanomaterial Dispersion/Dissolution Characterization Scientific...Nanotechnologies ERDC/EL SR-16-1 May 2016 Nanomaterial Dispersion/Dissolution Characterization Scientific Operating Procedure SOP-F-1 Lesley Miller...diagnostic application. While microscopy represents the only available method for measuring particle size, this is very labor intensive and prone to

A simple signaling rule for variable life-adjusted display derived from an equivalent risk-adjusted CUSUM chart.

PubMed

Wittenberg, Philipp; Gan, Fah Fatt; Knoth, Sven

2018-04-17

The variable life-adjusted display (VLAD) is the first risk-adjusted graphical procedure proposed in the literature for monitoring the performance of a surgeon. It displays the cumulative sum of expected minus observed deaths. It has since become highly popular because the statistic plotted is easy to understand. But it is also easy to misinterpret a surgeon's performance by utilizing the VLAD, potentially leading to grave consequences. The problem of misinterpretation is essentially caused by the variance of the VLAD's statistic that increases with sample size. In order for the VLAD to be truly useful, a simple signaling rule is desperately needed. Various forms of signaling rules have been developed, but they are usually quite complicated. Without signaling rules, making inferences using the VLAD alone is difficult if not misleading. In this paper, we establish an equivalence between a VLAD with V-mask and a risk-adjusted cumulative sum (RA-CUSUM) chart based on the difference between the estimated probability of death and surgical outcome. Average run length analysis based on simulation shows that this particular RA-CUSUM chart has similar performance as compared to the established RA-CUSUM chart based on the log-likelihood ratio statistic obtained by testing the odds ratio of death. We provide a simple design procedure for determining the V-mask parameters based on a resampling approach. Resampling from a real data set ensures that these parameters can be estimated appropriately. Finally, we illustrate the monitoring of a real surgeon's performance using VLAD with V-mask. Copyright © 2018 John Wiley & Sons, Ltd.

User acceptance of observation and response charts with a track and trigger system: a multisite staff survey.

PubMed

Elliott, Doug; Allen, Emily; McKinley, Sharon; Perry, Lin; Duffield, Christine; Fry, Margaret; Gallagher, Robyn; Iedema, Rick; Roche, Michael

2016-08-01

To examine user acceptance with a new format of charts for recording observations and as a prompt for responding to episodes of clinical deterioration in adult medical-surgical patients. Improving recognition and response to clinical deterioration remains a challenge for acute healthcare institutions globally. Five chart templates were developed in Australia, combining human factors design principles with a track and trigger system for escalation of care. Two chart templates were previously tested in simulations, but none had been evaluated in clinical practice. Prospective multisite survey of user acceptance of the charts in practice. New observation and response charts were trialled in parallel with existing charts for 24 hours across 36 adult acute medical-surgical wards, covering 108 shifts, in five Australian states. Surveys were completed by 477 staff respondents, with open-ended comments and narrative from short informal feedback groups providing elaboration and context of user experiences. Respondents were broadly supportive of the chart format and content for monitoring patients, and as a prompt for escalating care. Some concerns were noted for chart size and style, use of ranges to graph vital signs and with specific human factors design features. Information and training issues were identified to improve usability and adherence to chart guidelines and to support improved detection and response for patients with clinical deterioration. This initial evaluation demonstrated that the charts were perceived as appropriate for documenting observations and as a prompt to detect clinical deterioration. Further evaluation after some minor modifications to the chart is recommended. Explicit training on the principles and rationale of human factors chart design, use of embedded change management strategies and addressing practical issues will improve authentic engagement, staff acceptance and adoption by all clinical users when implementing a similar observation

Studying the neural bases of prism adaptation using fMRI: A technical and design challenge.

PubMed

Bultitude, Janet H; Farnè, Alessandro; Salemme, Romeo; Ibarrola, Danielle; Urquizar, Christian; O'Shea, Jacinta; Luauté, Jacques

2017-12-01

Prism adaptation induces rapid recalibration of visuomotor coordination. The neural mechanisms of prism adaptation have come under scrutiny since the observations that the technique can alleviate hemispatial neglect following stroke, and can alter spatial cognition in healthy controls. Relative to non-imaging behavioral studies, fMRI investigations of prism adaptation face several challenges arising from the confined physical environment of the scanner and the supine position of the participants. Any researcher who wishes to administer prism adaptation in an fMRI environment must adjust their procedures enough to enable the experiment to be performed, but not so much that the behavioral task departs too much from true prism adaptation. Furthermore, the specific temporal dynamics of behavioral components of prism adaptation present additional challenges for measuring their neural correlates. We developed a system for measuring the key features of prism adaptation behavior within an fMRI environment. To validate our configuration, we present behavioral (pointing) and head movement data from 11 right-hemisphere lesioned patients and 17 older controls who underwent sham and real prism adaptation in an MRI scanner. Most participants could adapt to prismatic displacement with minimal head movements, and the procedure was well tolerated. We propose recommendations for fMRI studies of prism adaptation based on the design-specific constraints and our results.

[The key parameters of design research and analysis of the Chinese reading visual acuity chart].

PubMed

Wang, Chen-xiao; Liu, Zhi-hui; Gao, Ji-tuo; Guo, Ying-xuan; He, Ji-cang; Qu, Jia; Lü, Fan

2013-06-01

Reading is a visual function human being used to understand environmental events based on writing materials. This study investigated the feasibility of reading visual acuity chart in assessment of reading ability by analysis of the key factors involved in the design of the visual acuity chart. The reading level was determined as grade 3 primary school with Song as the font and 30 characters included in the sentences. Each of the sentences consisted of 27 commonly-used Chinese characters (9 characters between any two punctuations) and 3 punctuations. There were no contextual clues between the 80 sentences selected. The characters had 13 different sizes with an increment of 0.1 log unit (e.g.1.2589) and 2.5 pt was determined as the critical threshold. Readable test for visual target was followed as (1) 29 candidates with a raw or corrected visual acuity (VA)of at least 1.0 were selected to read 80 selected sentences with the size of characters of 2.5 pt at a distance of 40 cm, (2) the time used for reading with the number of characters wrongly read was recorded, (3) 39 sentences were selected as visual targets based on reading speed, effective reading position and total number of character strokes, (4) The 39 selected sentences were then randomly divided into 3 groups with no significant difference among the groups in the 3 factors listed at (3) with paired t-test. This reading visual chart was at level of Grade 3 primary school with a total stroke number of 165-210(Mean 185 ± 10), 13 font sizes a 0.1 log unit increment, a song pattern and 2.5 pt as the critical threshold. All candidates achieved 100% correct in reading test under 2.5 pt with an effective reading speed as 120.65-162 wpm (Mean 142.93 ± 11.80) and effective reading position as 36.03-61.48(Mean 48.85 ± 6.81). The reading test for the 3 groups of sentences showed effective reading speed as (142.49 ± 12.14) wpm,(142.86 ± 12.55) wpm and (143.44 ± 11.63) wpm respectively(t1-2 = -0.899, t2-3 = -1

9. Photocopy of command flow chart of NIKE Battalion, Headquarters ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Photocopy of command flow chart of NIKE Battalion, Headquarters Battery and Missile Battery from Procedures and Drills for NIKE Ajax System, Department of the Army Field Manual, FM-44-80 from Institute for Military History, Carlisle Barracks, Carlisle, PA 1956 - NIKE Missile Battery PR-79, East Windsor Road south of State Route 101, Foster, Providence County, RI

Planar Poincare chart - A planar graphic representation of the state of light polarization

NASA Technical Reports Server (NTRS)

Tedjojuwono, Ken K.; Hunter, William W., Jr.; Ocheltree, Stewart L.

1989-01-01

The planar Poincare chart, which represents the complete planar equivalence of the Poincare sphere, is proposed. The four sets of basic lines are drawn on two separate charts for the generalization and convenience of reading the scale. The chart indicates the rotation of the principal axes of linear birefringent material. The relationships between parameters of the two charts are given as 2xi-2phi (orientation angle of the major axis-ellipticity angle) pair and 2alpha-delta (angle of amplitude ratio-phase difference angle) pair. The results are useful for designing and analyzing polarization properties of optical components with birefringent properties.

Analytical procedure validation and the quality by design paradigm.

PubMed

Rozet, Eric; Lebrun, Pierre; Michiels, Jean-François; Sondag, Perceval; Scherder, Tara; Boulanger, Bruno

2015-01-01

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a quality by design (QbD) approach, there have been many discussions on the opportunity for analytical procedure developments to follow a similar approach. While development and optimization of analytical procedure following QbD principles have been largely discussed and described, the place of analytical procedure validation in this framework has not been clarified. This article aims at showing that analytical procedure validation is fully integrated into the QbD paradigm and is an essential step in developing analytical procedures that are effectively fit for purpose. Adequate statistical methodologies have also their role to play: such as design of experiments, statistical modeling, and probabilistic statements. The outcome of analytical procedure validation is also an analytical procedure design space, and from it, control strategy can be set.

Development of Growth Charts of Pakistani Children Aged 4-15 Years Using Quantile Regression: A Cross-sectional Study

PubMed Central

Khan, Nazeer; Siddiqui, Junaid S; Baig-Ansari, Naila

2018-01-01

Background Growth charts are essential tools used by pediatricians as well as public health researchers in assessing and monitoring the well-being of pediatric populations. Development of these growth charts, especially for children above five years of age, is challenging and requires current anthropometric data and advanced statistical analysis. These growth charts are generally presented as a series of smooth centile curves. A number of modeling approaches are available for generating growth charts and applying these on national datasets is important for generating country-specific reference growth charts. Objective To demonstrate that quantile regression (QR) as a viable statistical approach to construct growth reference charts and to assess the applicability of the World Health Organization (WHO) 2007 growth standards to a large Pakistani population of school-going children. Methodology This is a secondary data analysis using anthropometric data of 9,515 students from a Pakistani survey conducted between 2007 and 2014 in four cities of Pakistan. Growth reference charts were created using QR as well as the LMS (Box-Cox transformation (L), the median (M), and the generalized coefficient of variation (S)) method and then compared with WHO 2007 growth standards. Results Centile values estimated by the LMS method and QR procedure had few differences. The centile values attained from QR procedure of BMI-for-age, weight-for-age, and height-for-age of Pakistani children were lower than the standard WHO 2007 centile. Conclusion QR should be considered as an alternative method to develop growth charts for its simplicity and lack of necessity to transform data. WHO 2007 standards are not suitable for Pakistani children. PMID:29632748

Development of Growth Charts of Pakistani Children Aged 4-15 Years Using Quantile Regression: A Cross-sectional Study.

PubMed

Iftikhar, Sundus; Khan, Nazeer; Siddiqui, Junaid S; Baig-Ansari, Naila

2018-02-02

Background Growth charts are essential tools used by pediatricians as well as public health researchers in assessing and monitoring the well-being of pediatric populations. Development of these growth charts, especially for children above five years of age, is challenging and requires current anthropometric data and advanced statistical analysis. These growth charts are generally presented as a series of smooth centile curves. A number of modeling approaches are available for generating growth charts and applying these on national datasets is important for generating country-specific reference growth charts. Objective To demonstrate that quantile regression (QR) as a viable statistical approach to construct growth reference charts and to assess the applicability of the World Health Organization (WHO) 2007 growth standards to a large Pakistani population of school-going children. Methodology This is a secondary data analysis using anthropometric data of 9,515 students from a Pakistani survey conducted between 2007 and 2014 in four cities of Pakistan. Growth reference charts were created using QR as well as the LMS (Box-Cox transformation (L), the median (M), and the generalized coefficient of variation (S)) method and then compared with WHO 2007 growth standards. Results Centile values estimated by the LMS method and QR procedure had few differences. The centile values attained from QR procedure of BMI-for-age, weight-for-age, and height-for-age of Pakistani children were lower than the standard WHO 2007 centile. Conclusion QR should be considered as an alternative method to develop growth charts for its simplicity and lack of necessity to transform data. WHO 2007 standards are not suitable for Pakistani children.

40 CFR 240.203-2 - Recommended procedures: Design.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommended procedures: Design. 240... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...

40 CFR 240.203-2 - Recommended procedures: Design.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Design. 240... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...

40 CFR 240.203-2 - Recommended procedures: Design.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Design. 240... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...

40 CFR 240.203-2 - Recommended procedures: Design.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

Design procedures for fiber composite box beams

NASA Technical Reports Server (NTRS)

Chamis, Cristos C.; Murthy, Pappu L. N.

1989-01-01

Step-by-step procedures are described which can be used for the preliminary design of fiber composite box beams subjected to combined loadings. These procedures include a collection of approximate closed-form equations so that all the required calculations can be performed using pocket calculators. Included is an illustrative example of a tapered cantilever box beam subjected to combined loads. The box beam is designed to satisfy strength, displacement, buckling, and frequency requirements.

Design Procedures for Fiber Composite Box Beams

NASA Technical Reports Server (NTRS)

Chamis, Christos C.; Murthy, Pappu L. N.

1988-01-01

Step-by-step procedures are described which can be used for the preliminary design of fiber composite box beams subjected to combined loadings. These procedures include a collection of approximate closed-form equations so that all the required calculations can be performed using pocket calculators. Included is an illustrated example of a tapered cantilever box beam subjected to combined loads. The box beam is designed to satisfy strength, displacement, buckling, and frequency requirements.

The F-92 RELIANT: Air transport system design simulation

NASA Technical Reports Server (NTRS)

1992-01-01

The design proposal of a semester long design project by group 'F' for AE 441 is addressed. In formulating this design, the driving philosophy was not just to fulfill the mission requirements (discussed in chapter two), but to do so in a creative manner - this explains the unconventional aircraft design, named the F-92 RELIANT. Although unconventional, and perhaps more expensive to produce, the design has distinct advantages which could only be attained through such a creative design. Major components of the F-92 Reliant include: (1) unobstructed cargo bay, 1024 cu. in. capability; (2) loading ramp; (3) dual wing configuration; and (4) polyhedral wing configuration. These design components either originated or evolved to create an aircraft that would most effectively meet the goals of cargo transportation in AeroWorld at minimum cost.

7 CFR 51.2276 - Color chart.

Code of Federal Regulations, 2012 CFR

2012-01-01

... walnut skin color listed as color classifications. (a) Availability of color chart. The USDA Walnut Color... 7 Agriculture 2 2012-01-01 2012-01-01 false Color chart. 51.2276 Section 51.2276 Agriculture... Standards for Shelled English Walnuts (Juglans Regia) General § 51.2276 Color chart. The color chart (USDA...

7 CFR 51.2276 - Color chart.

Code of Federal Regulations, 2011 CFR

2011-01-01

... walnut skin color listed as color classifications. (a) Availability of color chart. The USDA Walnut Color... 7 Agriculture 2 2011-01-01 2011-01-01 false Color chart. 51.2276 Section 51.2276 Agriculture... Standards for Shelled English Walnuts (Juglans Regia) General § 51.2276 Color chart. The color chart (USDA...

40 CFR 240.203-2 - Recommended procedures: Design.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Design. 240.203... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...

7 CFR 51.2276 - Color chart.

Code of Federal Regulations, 2014 CFR

2014-01-01

....2276 Color chart. The color chart (USDA Walnut Color Chart) to which reference is made in §§ 51.2281 and 51.2282 illustrates the four shades of walnut skin color listed as color classifications. (a... 7 Agriculture 2 2014-01-01 2014-01-01 false Color chart. 51.2276 Section 51.2276 Agriculture...

7 CFR 51.2276 - Color chart.

Code of Federal Regulations, 2013 CFR

2013-01-01

....2276 Color chart. The color chart (USDA Walnut Color Chart) to which reference is made in §§ 51.2281 and 51.2282 illustrates the four shades of walnut skin color listed as color classifications. (a... 7 Agriculture 2 2013-01-01 2013-01-01 false Color chart. 51.2276 Section 51.2276 Agriculture...

Charts for Estimating Tail-rotor Contribution to Helicopter Directional Stability and Control in Low-Speed Flight

NASA Technical Reports Server (NTRS)

Amer, Kenneth B; Gessow, Alfred

1955-01-01

Theoretically derived charts and equations are presented by which tail-rotor design studies of directional trim and control response at low forward speed can be conveniently made. The charts can also be used to obtain the main-rotor stability derivatives of thrust with respect to collective pitch and angle of attack at low forward speeds. The use of the charts and equations for tail-rotor design studies is illustrated. Comparisons between theoretical and experimental results are presented. The charts indicate, and flight tests confirm, that the region of vortex roughness which is familiar for the main rotor is also encountered by the tail rotor and that prolonged operation at the corresponding flight conditions would be difficult.

7 CFR 51.2276 - Color chart.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Color chart. 51.2276 Section 51.2276 Agriculture... Standards for Shelled English Walnuts (Juglans Regia) General § 51.2276 Color chart. The color chart (USDA Walnut Color Chart) to which reference is made in §§ 51.2281 and 51.2282 illustrates the four shades of...

7 CFR 51.2946 - Color chart.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Color chart. 51.2946 Section 51.2946 Agriculture... Standards for Grades of Walnuts in the Shell General § 51.2946 Color chart. The color chart (USDA Walnut Color Chart) to which reference is made in §§ 51.2948, 51.2949, 51.2950, 51.2954, and 51.2963...

Ince-Strutt stability charts for ship parametric roll resonance in irregular waves

NASA Astrophysics Data System (ADS)

Zhang, Xiao; Yang, He-zhen; Xiao, Fei; Xu, Pei-ji

2017-08-01

Ince-Strutt stability chart of ship parametric roll resonance in irregular waves is conducted and utilized for the exploration of the parametric roll resonance in irregular waves. Ship parametric roll resonance will lead to large amplitude roll motion and even wreck. Firstly, the equation describing the parametric roll resonance in irregular waves is derived according to Grim's effective theory and the corresponding Ince-Strutt stability charts are obtained. Secondly, the differences of stability charts for the parametric roll resonance in irregular and regular waves are compared. Thirdly, wave phases and peak periods are taken into consideration to obtain a more realistic sea condition. The influence of random wave phases should be taken into consideration when the analyzed points are located near the instability boundary. Stability charts for different wave peak periods are various. Stability charts are helpful for the parameter determination in design stage to better adapt to sailing condition. Last, ship variables are analyzed according to stability charts by a statistical approach. The increase of the metacentric height will help improve ship stability.

Synthesizing 3D Surfaces from Parameterized Strip Charts

NASA Technical Reports Server (NTRS)

Robinson, Peter I.; Gomez, Julian; Morehouse, Michael; Gawdiak, Yuri

2004-01-01

We believe 3D information visualization has the power to unlock new levels of productivity in the monitoring and control of complex processes. Our goal is to provide visual methods to allow for rapid human insight into systems consisting of thousands to millions of parameters. We explore this hypothesis in two complex domains: NASA program management and NASA International Space Station (ISS) spacecraft computer operations. We seek to extend a common form of visualization called the strip chart from 2D to 3D. A strip chart can display the time series progression of a parameter and allows for trends and events to be identified. Strip charts can be overlayed when multiple parameters need to visualized in order to correlate their events. When many parameters are involved, the direct overlaying of strip charts can become confusing and may not fully utilize the graphing area to convey the relationships between the parameters. We provide a solution to this problem by generating 3D surfaces from parameterized strip charts. The 3D surface utilizes significantly more screen area to illustrate the differences in the parameters and the overlayed strip charts, and it can rapidly be scanned by humans to gain insight. The selection of the third dimension must be a parallel or parameterized homogenous resource in the target domain, defined using a finite, ordered, enumerated type, and not a heterogeneous type. We demonstrate our concepts with examples from the NASA program management domain (assessing the state of many plans) and the computers of the ISS (assessing the state of many computers). We identify 2D strip charts in each domain and show how to construct the corresponding 3D surfaces. The user can navigate the surface, zooming in on regions of interest, setting a mark and drilling down to source documents from which the data points have been derived. We close by discussing design issues, related work, and implementation challenges.

A CFD-based aerodynamic design procedure for hypersonic wind-tunnel nozzles

NASA Technical Reports Server (NTRS)

Korte, John J.

1993-01-01

A new procedure which unifies the best of current classical design practices, computational fluid dynamics (CFD), and optimization procedures is demonstrated for designing the aerodynamic lines of hypersonic wind-tunnel nozzles. The new procedure can be used to design hypersonic wind tunnel nozzles with thick boundary layers where the classical design procedure has been shown to break down. An efficient CFD code, which solves the parabolized Navier-Stokes (PNS) equations using an explicit upwind algorithm, is coupled to a least-squares (LS) optimization procedure. A LS problem is formulated to minimize the difference between the computed flow field and the objective function, consisting of the centerline Mach number distribution and the exit Mach number and flow angle profiles. The aerodynamic lines of the nozzle are defined using a cubic spline, the slopes of which are optimized with the design procedure. The advantages of the new procedure are that it allows full use of powerful CFD codes in the design process, solves an optimization problem to determine the new contour, can be used to design new nozzles or improve sections of existing nozzles, and automatically compensates the nozzle contour for viscous effects as part of the unified design procedure. The new procedure is demonstrated by designing two Mach 15, a Mach 12, and a Mach 18 helium nozzles. The flexibility of the procedure is demonstrated by designing the two Mach 15 nozzles using different constraints, the first nozzle for a fixed length and exit diameter and the second nozzle for a fixed length and throat diameter. The computed flow field for the Mach 15 least squares parabolized Navier-Stokes (LS/PNS) designed nozzle is compared with the classically designed nozzle and demonstrates a significant improvement in the flow expansion process and uniform core region.

Objective evaluation of slanted edge charts

NASA Astrophysics Data System (ADS)

Hornung, Harvey (.

2015-01-01

Camera objective characterization methodologies are widely used in the digital camera industry. Most objective characterization systems rely on a chart with specific patterns, a software algorithm measures a degradation or difference between the captured image and the chart itself. The Spatial Frequency Response (SFR) method, which is part of the ISO 122331 standard, is now very commonly used in the imaging industry, it is a very convenient way to measure a camera Modulation transfer function (MTF). The SFR algorithm can measure frequencies beyond the Nyquist frequency thanks to super-resolution, so it does provide useful information on aliasing and can provide modulation for frequencies between half Nyquist and Nyquist on all color channels of a color sensor with a Bayer pattern. The measurement process relies on a chart that is simple to manufacture: a straight transition from a bright reflectance to a dark one (black and white for instance), while a sine chart requires handling precisely shades of gray which can also create all sort of issues with printers that rely on half-toning. However, no technology can create a perfect edge, so it is important to assess the quality of the chart and understand how it affects the accuracy of the measurement. In this article, I describe a protocol to characterize the MTF of a slanted edge chart, using a high-resolution flatbed scanner. The main idea is to use the RAW output of the scanner as a high-resolution micro-densitometer, since the signal is linear it is suitable to measure the chart MTF using the SFR algorithm. The scanner needs to be calibrated in sharpness: the scanner MTF is measured with a calibrated sine chart and inverted to compensate for the modulation loss from the scanner. Then the true chart MTF is computed. This article compares measured MTF from commercial charts and charts printed on printers, and also compares how of the contrast of the edge (using different shades of gray) can affect the chart MTF

Application of two procedures for dual-point design of transonic airfoils

NASA Technical Reports Server (NTRS)

Mineck, Raymond E.; Campbell, Richard L.; Allison, Dennis O.

1994-01-01

Two dual-point design procedures were developed to reduce the objective function of a baseline airfoil at two design points. The first procedure to develop a redesigned airfoil used a weighted average of the shapes of two intermediate airfoils redesigned at each of the two design points. The second procedure used a weighted average of two pressure distributions obtained from an intermediate airfoil redesigned at each of the two design points. Each procedure was used to design a new airfoil with reduced wave drag at the cruise condition without increasing the wave drag or pitching moment at the climb condition. Two cycles of the airfoil shape-averaging procedure successfully designed a new airfoil that reduced the objective function and satisfied the constraints. One cycle of the target (desired) pressure-averaging procedure was used to design two new airfoils that reduced the objective function and came close to satisfying the constraints.

The functional magnetic resonance imaging (fMRI) procedure as experienced by healthy participants and stroke patients--a pilot study.

PubMed

Szameitat, André J; Shen, Shan; Sterr, Annette

2009-07-31

An important aspect in functional imaging research employing magnetic resonance imaging (MRI) is how participants perceive the MRI scanning itself. For instance, the knowledge of how (un)comfortable MRI scanning is perceived may help institutional review boards (IRBs) or ethics committees to decide on the approval of a study, or researchers to design their experiments. We provide empirical data from our lab gained from 70 neurologically healthy mainly student subjects and from 22 mainly elderly patients suffering from motor deficits after brain damage. All participants took part in various basic research fMRI studies using a 3T MRI scanner. Directly after the scanning, all participants completed a questionnaire assessing their experience with the fMRI procedure. 87.2% of the healthy subjects and 77.3% of the patients rated the MRI procedure as acceptable to comfortable. In healthy subjects, males found the procedure more comfortable, while the opposite was true for patients. 12.1% of healthy subjects considered scanning durations between 30 and 60 min as too long, while no patient considered their 30 min scanning interval as too long. 93.4% of the healthy subjects would like to participate in an fMRI study again, with a significantly lower rate for the subjects who considered the scanning as too long. Further factors, such as inclusion of a diffusion tensor imaging (DTI) scan, age, and study duration had no effect on the questionnaire responses. Of the few negative comments, the main issues were noise, the restriction to keep still for the whole time, and occasional feelings of dizziness. MRI scanning in the basic research setting is an acceptable procedure for elderly and patient participants as well as young healthy subjects.

Design of an MR-compatible fNIRS instrument

NASA Astrophysics Data System (ADS)

Emir, Uzay; Ademoglu, Ahmet; Ozturk, Cengizhan; Aydin, Kubilay; Demiralp, Tamer; Kurt, Adnan; Dincer, Alp; Akin, Ata

2005-04-01

Acquiring functional near infrared spectroscopy (fNIRS) and functional magnetic resonance-imaging (fMRI) data are usually done asynchronously. In order to correlate these two different modalities" data, measurements must be performed at the same time. In this study, we have designed a new MR compatible continuous wave intensity based fNIRS device to overcome this problem. For MR compatible fNIRS, we used two LEDs with wavelengths at 660 and 870 nm. There are four photodiodes for light detection. LEDs operated in a sequential multiplexing mode with adjustable "on" time for each LED. Emitted and diffused light was transferred to and from the tissue through 10 m long single mode plastic optical fibers (INDUSTRIAL FIBER OPTICS, INC.). By using fibers, we overcome MR compatibility problems that can be caused by semi-conductors on probe. This MR compatible fNIRS design can provide synchronous measurements with low cost.

User-Centered Design Practices to Redesign a Nursing e-Chart in Line with the Nursing Process.

PubMed

Schachner, María B; Recondo, Francisco J; González, Zulma A; Sommer, Janine A; Stanziola, Enrique; Gassino, Fernando D; Simón, Mariana; López, Gastón E; Benítez, Sonia E

2016-01-01

Regarding the user-centered design (UCD) practices carried out at Hospital Italiano of Buenos Aires, nursing e-chart user interface was redesigned in order to improve records' quality of nursing process based on an adapted Virginia Henderson theoretical model and patient safety standards to fulfil Joint Commission accreditation requirements. UCD practices were applied as standardized and recommended for electronic medical records usability evaluation. Implementation of these practices yielded a series of prototypes in 5 iterative cycles of incremental improvements to achieve goals of usability which were used and perceived as satisfactory by general care nurses. Nurses' involvement allowed balance between their needs and institution requirements.

Designing Flight-Deck Procedures

NASA Technical Reports Server (NTRS)

Degani, Asaf; Wiener, L.; Shafto, Mike (Technical Monitor)

1995-01-01

A complex human-machine system consists of more than merely one or more human operators and a collection of hardware components. In order to operate a complex system successfully, the human-machine system must be supported by an organizational infrastructure of operating concepts, rules, guidelines, and documents. The coherency of such operating concepts, in terms of consistency and logic, is vitally important for the efficiency and safety of any complex system. In high-risk endeavors such as aircraft operations, space flight, nuclear power production, manufacturing process control, and military operations, it is essential that such support be flawless, as the price of operational error can be high. When operating rules are not adhered to, or the rules are inadequate for the task at hand, not only will the system's goals be thwarted, but there may also be tragic human and material consequences. To ensure safe and predictable operations, support to the operators, in this case flight crews, often comes in the form of standard operating procedures. These provide the crew with step-by-step guidance for carrying out their operations. Standard procedures do indeed promote uniformity, but they do so at the risk of reducing the role of human operators to a lower level. Management, however, must recognize the danger of over-procedurization, which fails to exploit one of the most valuable assets in the system, the intelligent operator who is "on the scene." The alert system designer and operations manager recognize that there cannot be a procedure for everything, and the time will come in which the operators of a complex system will face a situation for which there is no written procedure. Procedures, whether executed by humans or machines, have their place, but so does human cognition.

Flexible pavement overlay design procedures. Volume 1: Evaluation and modification of the design methods

NASA Astrophysics Data System (ADS)

Majidzadeh, K.; Ilves, G. J.

1981-08-01

A ready reference to design procedures for asphaltic concrete overlay of flexible pavements based on elastic layer theory is provided. The design procedures and the analytical techniques presented were formulated to predict the structural fatigue response of asphaltic concrete overlays for various design conditions, including geometrical and material properties, loading conditions and environmental variables.

A Tale of Two Methods: Chart and Interview Methods for Identifying Delirium

PubMed Central

Saczynski, Jane S.; Kosar, Cyrus M.; Xu, Guoquan; Puelle, Margaret R.; Schmitt, Eva; Jones, Richard N.; Marcantonio, Edward R.; Wong, Bonnie; Isaza, Ilean; Inouye, Sharon K.

2014-01-01

Background Interview and chart-based methods for identifying delirium have been validated. However, relative strengths and limitations of each method have not been described, nor has a combined approach (using both interviews and chart), been systematically examined. Objectives To compare chart and interview-based methods for identification of delirium. Design, Setting and Participants Participants were 300 patients aged 70+ undergoing major elective surgery (majority were orthopedic surgery) interviewed daily during hospitalization for delirium using the Confusion Assessment Method (CAM; interview-based method) and whose medical charts were reviewed for delirium using a validated chart-review method (chart-based method). We examined rate of agreement on the two methods and patient characteristics of those identified using each approach. Predictive validity for clinical outcomes (length of stay, postoperative complications, discharge disposition) was compared. In the absence of a gold-standard, predictive value could not be calculated. Results The cumulative incidence of delirium was 23% (n= 68) by the interview-based method, 12% (n=35) by the chart-based method and 27% (n=82) by the combined approach. Overall agreement was 80%; kappa was 0.30. The methods differed in detection of psychomotor features and time of onset. The chart-based method missed delirium in CAM-identified patients laacking features of psychomotor agitation or inappropriate behavior. The CAM-based method missed chart-identified cases occurring during the night shift. The combined method had high predictive validity for all clinical outcomes. Conclusions Interview and chart-based methods have specific strengths for identification of delirium. A combined approach captures the largest number and the broadest range of delirium cases. PMID:24512042

Dynamic probability control limits for risk-adjusted CUSUM charts based on multiresponses.

PubMed

Zhang, Xiang; Loda, Justin B; Woodall, William H

2017-07-20

For a patient who has survived a surgery, there could be several levels of recovery. Thus, it is reasonable to consider more than two outcomes when monitoring surgical outcome quality. The risk-adjusted cumulative sum (CUSUM) chart based on multiresponses has been developed for monitoring a surgical process with three or more outcomes. However, there is a significant effect of varying risk distributions on the in-control performance of the chart when constant control limits are applied. To overcome this disadvantage, we apply the dynamic probability control limits to the risk-adjusted CUSUM charts for multiresponses. The simulation results demonstrate that the in-control performance of the charts with dynamic probability control limits can be controlled for different patient populations because these limits are determined for each specific sequence of patients. Thus, the use of dynamic probability control limits for risk-adjusted CUSUM charts based on multiresponses allows each chart to be designed for the corresponding patient sequence of a surgeon or a hospital and therefore does not require estimating or monitoring the patients' risk distribution. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

17 CFR 240.15d-15 - Controls and procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... control framework that is established by a body or group that has followed due-process procedures..., without limitation, controls and procedures designed to ensure that information required to be disclosed... disclosure. (f) The term internal control over financial reporting is defined as a process designed by, or...

17 CFR 240.15d-15 - Controls and procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... control framework that is established by a body or group that has followed due-process procedures..., without limitation, controls and procedures designed to ensure that information required to be disclosed... disclosure. (f) The term internal control over financial reporting is defined as a process designed by, or...

Limited Documentation and Treatment Quality of Glycemic Inpatient Care in Relation to Structural Deficits of Heterogeneous Insulin Charts at a Large University Hospital.

PubMed

Kopanz, Julia; Lichtenegger, Katharina M; Sendlhofer, Gerald; Semlitsch, Barbara; Cuder, Gerald; Pak, Andreas; Pieber, Thomas R; Tax, Christa; Brunner, Gernot; Plank, Johannes

2018-02-09

Insulin charts represent a key component in the inpatient glycemic management process. The aim was to evaluate the quality of structure, documentation, and treatment of diabetic inpatient care to design a new standardized insulin chart for a large university hospital setting. Historically grown blank insulin charts in use at 39 general wards were collected and evaluated for quality structure features. Documentation and treatment quality were evaluated in a consecutive snapshot audit of filled-in charts. The primary end point was the percentage of charts with any medication error. Overall, 20 different blank insulin charts with variable designs and significant structural deficits were identified. A medication error occurred in 55% of the 102 audited filled-in insulin charts, consisting of prescription and management errors in 48% and 16%, respectively. Charts of insulin-treated patients had more medication errors relative to patients treated with oral medication (P < 0.01). Chart design did support neither clinical authorization of individual insulin prescription (10%), nor insulin administration confirmed by nurses' signature (25%), nor treatment of hypoglycemia (0%), which resulted in a reduced documentation and treatment quality in clinical practice 7%, 30%, 25%, respectively. A multitude of charts with variable design characteristics and structural deficits were in use across the inpatient wards. More than half of the inpatients had a chart displaying a medication error. Lack of structure quality features of the charts had an impact on documentation and treatment quality. Based on identified deficits and international standards, a new insulin chart was developed to overcome these quality hurdles.

Validation of life-charts documented with the personal life-chart app - a self-monitoring tool for bipolar disorder.

PubMed

Schärer, Lars O; Krienke, Ute J; Graf, Sandra-Mareike; Meltzer, Katharina; Langosch, Jens M

2015-03-14

Long-term monitoring in bipolar affective disorders constitutes an important therapeutic and preventive method. The present study examines the validity of the Personal Life-Chart App (PLC App), in both German and in English. This App is based on the National Institute of Mental Health's Life-Chart Method, the de facto standard for long-term monitoring in the treatment of bipolar disorders. Methods have largely been replicated from 2 previous Life-Chart studies. The participants documented Life-Charts with the PLC App on a daily basis. Clinicians assessed manic and depressive symptoms in clinical interviews using the Inventory of Depressive Symptomatology, clinician-rated (IDS-C) and the Young Mania Rating Scale (YMRS) on a monthly basis on average. Spearman correlations of the total scores of IDS-C and YMRS were calculated with both the Life-Chart functional impairment rating and mood rating documented with the PLC App. 44 subjects used the PLC App in German and 10 subjects used the PLC App in English. 118 clinical interviews from the German sub-sample and 97 from the English sub-sample were analysed separately. The results in both sub-samples are similar to previous Life-Chart validation studies. Again statistically significant high correlations were found between the Life-Chart function rating assigned through the PLC App and well-established observer-rated methods. Again correlations were weaker for the Life-Chart mood rating than for the Life-Chart function impairment. No relevant correlation was found between the Life-chart mood rating and YMRS in the German sub-sample. This study gives further evidence for the validity of the Life-Chart method as a valid tool for the recognition of both manic and depressive episodes. Documenting Life-Charts with the PLC App (English and German) does not seem to impair the validity of patient ratings.

Weld Design, Testing, and Assessment Procedures for High Strength Pipelines

DOT National Transportation Integrated Search

2011-12-20

Long-distance high-strength pipelines are increasingly being constructed for the efficient transportation of energy products. While the high-strength linepipe steels and high productivity welding processes are being applied, the procedures employed f...

Program for Generating Graphs and Charts

NASA Technical Reports Server (NTRS)

Ackerson, C. T.

1986-01-01

Office Automation Pilot (OAP) Graphics Database system offers IBM personal computer user assistance in producing wide variety of graphs and charts and convenient data-base system, called chart base, for creating and maintaining data associated with graphs and charts. Thirteen different graphics packages available. Access graphics capabilities obtained in similar manner. User chooses creation, revision, or chartbase-maintenance options from initial menu; Enters or modifies data displayed on graphic chart. OAP graphics data-base system written in Microsoft PASCAL.

Parallel Treatments Design: A Nested Single Subject Design for Comparing Instructional Procedures.

ERIC Educational Resources Information Center

Gast, David L.; Wolery, Mark

1988-01-01

This paper describes the parallel treatments design, a nested single subject experimental design that combines two concurrently implemented multiple probe designs, allows control for effects of extraneous variables through counterbalancing, and replicates its effects across behaviors. Procedural guidelines for the design's use and issues related…

Design of Microstrip Bandpass Filters Using SIRs with Even-Mode Harmonics Suppression for Cellular Systems

NASA Astrophysics Data System (ADS)

Theerawisitpong, Somboon; Suzuki, Toshitatsu; Morita, Noboru; Utsumi, Yozo

The design of microstrip bandpass filters using stepped-impedance resonators (SIRs) is examined. The passband center frequency for the WCDMA-FDD (uplink band) Japanese cellular system is 1950MHz with a 60-MHz bandwidth. The SIR physical characteristic can be designed using a SIR characteristic chart based on second harmonic suppression. In our filter design, passband design charts were obtained through the design procedure. Tchebycheff and maximally flat bandpass filters of any bandwidth and any number of steps can be designed using these passband design charts. In addition, sharp skirt characteristics in the passband can be realized by having two transmission zeros at both adjacent frequency bands by using open-ended quarter-wavelength stubs at input and output ports. A new even-mode harmonics suppression technique is proposed to enable a wide rejection band having a high suppression level. The unloaded quality factor of the resonator used in the proposed filters is greater than 240.

Interactive SIGHT: textual access to simple bar charts

NASA Astrophysics Data System (ADS)

Demir, Seniz; Oliver, David; Schwartz, Edward; Elzer, Stephanie; Carberry, Sandra; Mccoy, Kathleen F.; Chester, Daniel

2010-12-01

the system offering different options to access the content of a chart to meet their specific needs and that they would use Interactive SIGHT if it was publicly available so as not to have to ignore graphics on the web. Being a language based assistive technology designed to compensate for the lack of sight, our work paves the road for a stronger acceptance of natural language interfaces to graph interpretation that we believe will be of great benefit to the visually impaired community.

Review of chart recognition in document images

NASA Astrophysics Data System (ADS)

Liu, Yan; Lu, Xiaoqing; Qin, Yeyang; Tang, Zhi; Xu, Jianbo

2013-01-01

As an effective information transmitting way, chart is widely used to represent scientific statistics datum in books, research papers, newspapers etc. Though textual information is still the major source of data, there has been an increasing trend of introducing graphs, pictures, and figures into the information pool. Text recognition techniques for documents have been accomplished using optical character recognition (OCR) software. Chart recognition techniques as a necessary supplement of OCR for document images are still an unsolved problem due to the great subjectiveness and variety of charts styles. This paper reviews the development process of chart recognition techniques in the past decades and presents the focuses of current researches. The whole process of chart recognition is presented systematically, which mainly includes three parts: chart segmentation, chart classification, and chart Interpretation. In each part, the latest research work is introduced. In the last, the paper concludes with a summary and promising future research direction.

Systematic procedure for designing processes with multiple environmental objectives.

PubMed

Kim, Ki-Joo; Smith, Raymond L

2005-04-01

Evaluation of multiple objectives is very important in designing environmentally benign processes. It requires a systematic procedure for solving multiobjective decision-making problems due to the complex nature of the problems, the need for complex assessments, and the complicated analysis of multidimensional results. In this paper, a novel systematic procedure is presented for designing processes with multiple environmental objectives. This procedure has four steps: initialization, screening, evaluation, and visualization. The first two steps are used for systematic problem formulation based on mass and energy estimation and order of magnitude analysis. In the third step, an efficient parallel multiobjective steady-state genetic algorithm is applied to design environmentally benign and economically viable processes and to provide more accurate and uniform Pareto optimal solutions. In the last step a new visualization technique for illustrating multiple objectives and their design parameters on the same diagram is developed. Through these integrated steps the decision-maker can easily determine design alternatives with respect to his or her preferences. Most importantly, this technique is independent of the number of objectives and design parameters. As a case study, acetic acid recovery from aqueous waste mixtures is investigated by minimizing eight potential environmental impacts and maximizing total profit. After applying the systematic procedure, the most preferred design alternatives and their design parameters are easily identified.

Reliability based fatigue design and maintenance procedures

NASA Technical Reports Server (NTRS)

Hanagud, S.

1977-01-01

A stochastic model has been developed to describe a probability for fatigue process by assuming a varying hazard rate. This stochastic model can be used to obtain the desired probability of a crack of certain length at a given location after a certain number of cycles or time. Quantitative estimation of the developed model was also discussed. Application of the model to develop a procedure for reliability-based cost-effective fail-safe structural design is presented. This design procedure includes the reliability improvement due to inspection and repair. Methods of obtaining optimum inspection and maintenance schemes are treated.

Off the Charts

NASA Technical Reports Server (NTRS)

Muirhead, Brian K.

2003-01-01

NASA basically looked at the two options and said, "Well, propulsion...that's the old way of doing business. You guys will never get this job done if you do it that way. It's too expensive." And so we said, "Okay, let's go make this airbag thing work." The airbags idea was clearly eccentric. Off the charts. When you think of an airbag, you think of the automobile design, about twice the size of a pillow, which took many years to develop. But what we needed would have to be about 19 feet in diameter, designed to tolerate a head-on collision with a very rocky Mars surface at 60 miles per hour or more. And not just once, but multiple times, as it bounced and rolled to a stop. The only thing in common between our design and an automobile airbag was the name. Another very eccentric aspect of this was the idea of using fabrics in outer space. We were used to dealing in aluminum and titanium, but is needed to be the stuff of bulletproof vests...advanced polymer cloth. We'd worked with software in space, but not 'softgoods.'

46 CFR 169.218 - Procedures for designating sailing school vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Procedures for designating sailing school vessels. 169... SAILING SCHOOL VESSELS Inspection and Certification Letter of Designation § 169.218 Procedures for designating sailing school vessels. (a) Upon written request by a qualified institution, a determination is...

46 CFR 169.218 - Procedures for designating sailing school vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Procedures for designating sailing school vessels. 169... SAILING SCHOOL VESSELS Inspection and Certification Letter of Designation § 169.218 Procedures for designating sailing school vessels. (a) Upon written request by a qualified institution, a determination is...

Crew Procedures for Continuous Descent Arrivals Using Conventional Guidance

NASA Technical Reports Server (NTRS)

Oseguera-Lohr, Rosa M.; Williams, David H.; Lewis, Elliot T,

2007-01-01

This paper presents results from a simulation study which investigated the use of Continuous Descent Arrival (CDA) procedures for conducting a descent through a busy terminal area, using conventional transport-category automation. This research was part of the Low Noise Flight Procedures (LNFP) element within the Quiet Aircraft Technology (QAT) Project, that addressed development of flight guidance, and supporting pilot and Air Traffic Control (ATC) procedures for low noise operations. The procedures and chart were designed to be easy to understand, and to make it easy for the crew to make changes via the Flight Management Computer Control-Display Unit (FMC-CDU) to accommodate changes from ATC. The test runs were intended to represent situations typical of what exists in many of today's terminal areas, including interruptions to the descent in the form of clearances issued by ATC.

The functional magnetic resonance imaging (fMRI) procedure as experienced by healthy participants and stroke patients – A pilot study

PubMed Central

2009-01-01

Background An important aspect in functional imaging research employing magnetic resonance imaging (MRI) is how participants perceive the MRI scanning itself. For instance, the knowledge of how (un)comfortable MRI scanning is perceived may help institutional review boards (IRBs) or ethics committees to decide on the approval of a study, or researchers to design their experiments. Methods We provide empirical data from our lab gained from 70 neurologically healthy mainly student subjects and from 22 mainly elderly patients suffering from motor deficits after brain damage. All participants took part in various basic research fMRI studies using a 3T MRI scanner. Directly after the scanning, all participants completed a questionnaire assessing their experience with the fMRI procedure. Results 87.2% of the healthy subjects and 77.3% of the patients rated the MRI procedure as acceptable to comfortable. In healthy subjects, males found the procedure more comfortable, while the opposite was true for patients. 12.1% of healthy subjects considered scanning durations between 30 and 60 min as too long, while no patient considered their 30 min scanning interval as too long. 93.4% of the healthy subjects would like to participate in an fMRI study again, with a significantly lower rate for the subjects who considered the scanning as too long. Further factors, such as inclusion of a diffusion tensor imaging (DTI) scan, age, and study duration had no effect on the questionnaire responses. Of the few negative comments, the main issues were noise, the restriction to keep still for the whole time, and occasional feelings of dizziness. Conclusion MRI scanning in the basic research setting is an acceptable procedure for elderly and patient participants as well as young healthy subjects. PMID:19646238

(W)righting women: constructions of gender, sexuality and race in the psychiatric chart.

PubMed

Daley, Andrea; Costa, Lucy; Ross, Lori

2012-01-01

This paper examines the interpretative nature of psychiatry in relation to gender, sexuality and race within the particular time and place of one urban, Canadian, clinical psychiatric setting. We bring women's psychiatric inpatient charts and a critical feminist perspective into dialogue in an effort to focus on gender, sexuality and race in psychiatric narratives on women's madness. The research used a qualitative, retrospective research design to examine the psychiatric narrative as a technique of power as it operates on women. This paper focuses on the overarching theme of 'medicalisation', identified from the analysis of women's psychiatric inpatient charts, including two subthemes: (1) language and composition and (2) decontextualisation. Our analysis suggests that psychiatric chart documentation practices that reproduce gendered, sexualised, and racialised biases and assumptions and decontextualise the social and structural context of women's experiences of madness serve to create the paradox of women's visibility/erasure in psychiatric charts. The paper concludes with an exploration of the significance of women's authorship legitimacy in psychiatric chart documentation.

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Two-phase design-build... for Leasehold Interests in Real Property 570.305 Two-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if you use the two-phase design-build...

Computer-aided design of high-contact-ratio gears for minimum dynamic load and stress

NASA Technical Reports Server (NTRS)

Lin, Hsiang Hsi; Lee, Chinwai; Oswald, Fred B.; Townsend, Dennis P.

1990-01-01

A computer aided design procedure is presented for minimizing dynamic effects on high contact ratio gears by modification of the tooth profile. Both linear and parabolic tooth profile modifications of high contact ratio gears under various loading conditions are examined and compared. The effects of the total amount of modification and the length of the modification zone were systematically studied at various loads and speeds to find the optimum profile design for minimizing the dynamic load and the tooth bending stress. Parabolic profile modification is preferred over linear profile modification for high contact ratio gears because of its lower sensitivity to manufacturing errors. For parabolic modification, a greater amount of modification at the tooth tip and a longer modification zone are required. Design charts are presented for high contact ratio gears with various profile modifications operating under a range of loads. A procedure is illustrated for using the charts to find the optimum profile design.

Enhanced Cumulative Sum Charts for Monitoring Process Dispersion

PubMed Central

Abujiya, Mu’azu Ramat; Riaz, Muhammad; Lee, Muhammad Hisyam

2015-01-01

The cumulative sum (CUSUM) control chart is widely used in industry for the detection of small and moderate shifts in process location and dispersion. For efficient monitoring of process variability, we present several CUSUM control charts for monitoring changes in standard deviation of a normal process. The newly developed control charts based on well-structured sampling techniques - extreme ranked set sampling, extreme double ranked set sampling and double extreme ranked set sampling, have significantly enhanced CUSUM chart ability to detect a wide range of shifts in process variability. The relative performances of the proposed CUSUM scale charts are evaluated in terms of the average run length (ARL) and standard deviation of run length, for point shift in variability. Moreover, for overall performance, we implore the use of the average ratio ARL and average extra quadratic loss. A comparison of the proposed CUSUM control charts with the classical CUSUM R chart, the classical CUSUM S chart, the fast initial response (FIR) CUSUM R chart, the FIR CUSUM S chart, the ranked set sampling (RSS) based CUSUM R chart and the RSS based CUSUM S chart, among others, are presented. An illustrative example using real dataset is given to demonstrate the practicability of the application of the proposed schemes. PMID:25901356

Identifying representative symbology for low visibility operations/surface movement guidance and control system (LVO/SMGCS) paper charts

DOT National Transportation Integrated Search

2015-05-04

The Volpe Center developed a questionnaire to examine the representativeness of symbol shapes and the usefulness of information depicted on Low Visibility Operations/Surface Movement Guidance and Control System (LVO/SMGCS) paper charts. One-hundred f...

Quality Assurance: Patient Chart Reviews

NASA Astrophysics Data System (ADS)

Oginni, B. M.; Odero, D. O.

2009-07-01

Recent developments in radiation therapy have immensely impacted the way the radiation dose is delivered to patients undergoing radiation treatments. However, the fundamental quality assurance (QA) issues underlying the radiation therapy still remain the accuracy of the radiation dose and the radiation safety. One of the major duties of clinical medical physicists in the radiation therapy departments still revolves around ensuring the accuracy of dose delivery to the planning target volume (PTV), the reduction of unintended radiation to normal organs and minimization of the radiation exposure to the medical personnel based on ALARA (as low as reasonably achievable) principle. Many of the errors in radiation therapy can be minimized through a comprehensive program of periodic checks. One of the QA procedures on the patient comes in the form of chart reviews which could be in either electronic or paper-based format. We present the quality assurance procedures that have to be performed on the patient records from the beginning and periodically to the end of the treatment, based on the guidelines from the American Association of Physicists in Medicine (AAPM) and American College of Physicians (ACP).

Sticker charts: a method for improving adherence to treatment of chronic diseases in children.

PubMed

Luersen, Kara; Davis, Scott A; Kaplan, Sebastian G; Abel, Troy D; Winchester, Woodrow W; Feldman, Steven R

2012-01-01

Poor adherence is a common problem and may be an underlying cause of poor clinical outcomes. In pediatric populations, positive reinforcement techniques such as sticker charts may increase motivation to adhere to treatment regimens. To review the use of sticker charts to improve adherence in children with chronic disease, Medline and PsycINFO searches were conducted using the key words "positive reinforcement OR behavior therapy" and "adherence OR patient compliance" and "child." Randomized controlled retrospective cohort or single-subject-design studies were selected. Studies reporting adherence to the medical treatment of chronic disease in children using positive reinforcement techniques were included in the analysis. The systematic search was supplemented by identifying additional studies identified through the reference lists and authors of the initial articles found. Positive reinforcement techniques such as sticker charts increase adherence to medical treatment regimens. In several studies, this effect was maintained for months after the initial intervention. Better adherence correlated with better clinical outcomes in some, but not all, studies. Few studies examining the use of sticker charts were identified. Although single-subject-design studies are useful in establishing the effect of a behavioral intervention, larger randomized controlled trials would help determine the precise efficacy of sticker chart interventions. Adherence to medical treatments in children can be increased using sticker charts or other positive reinforcement techniques. This may be an effective means to encourage children with atopic dermatitis to apply their medications and improve clinical outcomes. © 2012 Wiley Periodicals, Inc.

7 CFR 51.2946 - Color chart.

Code of Federal Regulations, 2012 CFR

2012-01-01

... illustrates four shades of color used to describe skin color of walnut kernels. (a) Availability of color... 7 Agriculture 2 2012-01-01 2012-01-01 false Color chart. 51.2946 Section 51.2946 Agriculture... Standards for Grades of Walnuts in the Shell General § 51.2946 Color chart. The color chart (USDA Walnut...

7 CFR 51.2946 - Color chart.

Code of Federal Regulations, 2011 CFR

2011-01-01

... illustrates four shades of color used to describe skin color of walnut kernels. (a) Availability of color... 7 Agriculture 2 2011-01-01 2011-01-01 false Color chart. 51.2946 Section 51.2946 Agriculture... Standards for Grades of Walnuts in the Shell General § 51.2946 Color chart. The color chart (USDA Walnut...

Abnormal response to methylphenidate across multiple fMRI procedures in cocaine use disorder: feasibility study.

PubMed

Moeller, Scott J; Konova, Anna B; Tomasi, Dardo; Parvaz, Muhammad A; Goldstein, Rita Z

2016-07-01

The indirect dopamine agonist methylphenidate remediates cognitive deficits in psychopathology, but the individual characteristics that determine its effects on the brain are not known. We aimed to determine whether targeted dopaminergically modulated traits and individual differences could predict neural response to methylphenidate across multiple functional magnetic resonance imaging (fMRI) procedures. We combined neural measures from three separate procedures (two inhibitory control tasks differing in their degree of emotional salience and resting-state functional connectivity) during methylphenidate (20 mg oral, versus randomized and counterbalanced placebo) and correlated these aggregated responses with cocaine use disorder diagnosis (22 cocaine abusers, 21 controls), symptoms of attention deficit hyperactivity disorder, and working memory capacity. Cocaine abusers, relative to controls, had a lower response in the dorsolateral prefrontal cortex to methylphenidate across all three procedures, driven by responses to the two inhibitory control tasks; reduced methylphenidate fMRI response in this region further correlated with more frequent cocaine use. Cocaine abuse (and its frequency), associated with lower tonic dopamine levels, correlated with a reduction in activation to methylphenidate (versus placebo). These initial results provide feasibility to the idea that multimodal fMRI tasks can be meaningfully aggregated, and that these aggregated procedures show a common disruption in addiction in a highly anticipated region relevant to cognitive control. Results also suggest that drug use frequency may represent an important modulatory variable in interpreting the efficacy of pharmacologically enhanced cognitive interventions in addiction.

7 CFR 1948.67 - Procedure for designation.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) PROGRAM REGULATIONS (CONTINUED) RURAL DEVELOPMENT Section 601 Energy Impacted Area Development Assistance Program § 1948.67 Procedure for designation. (a) Local governments may request the Governor of the State... the socio-economic integration of the area. (c) The Governor may designate an area as an energy...

7 CFR 1948.67 - Procedure for designation.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) PROGRAM REGULATIONS (CONTINUED) RURAL DEVELOPMENT Section 601 Energy Impacted Area Development Assistance Program § 1948.67 Procedure for designation. (a) Local governments may request the Governor of the State... the socio-economic integration of the area. (c) The Governor may designate an area as an energy...

Flexible pavement overlay design procedures. Volume 2: User manual

NASA Astrophysics Data System (ADS)

Majidzadeh, K.; Ilves, G. J.

1981-08-01

This user manual outlines a procedure for the design of asphaltic concrete overlays on existing asphaltic concrete pavement surfaces. It is intended as a guide to the user on the type and form of information required as input to the procedure and contains all elements necessary for the user to prepare designs for flexible pavement overlays.

fMRI reliability: influences of task and experimental design.

PubMed

Bennett, Craig M; Miller, Michael B

2013-12-01

As scientists, it is imperative that we understand not only the power of our research tools to yield results, but also their ability to obtain similar results over time. This study is an investigation into how common decisions made during the design and analysis of a functional magnetic resonance imaging (fMRI) study can influence the reliability of the statistical results. To that end, we gathered back-to-back test-retest fMRI data during an experiment involving multiple cognitive tasks (episodic recognition and two-back working memory) and multiple fMRI experimental designs (block, event-related genetic sequence, and event-related m-sequence). Using these data, we were able to investigate the relative influences of task, design, statistical contrast (task vs. rest, target vs. nontarget), and statistical thresholding (unthresholded, thresholded) on fMRI reliability, as measured by the intraclass correlation (ICC) coefficient. We also utilized data from a second study to investigate test-retest reliability after an extended, six-month interval. We found that all of the factors above were statistically significant, but that they had varying levels of influence on the observed ICC values. We also found that these factors could interact, increasing or decreasing the relative reliability of certain Task × Design combinations. The results suggest that fMRI reliability is a complex construct whose value may be increased or decreased by specific combinations of factors.

Readability of New Aviation Chart Symbology in Day and NVG Reading Conditions.

PubMed

Wagstaff, Anthony S; Larsen, Terje

2017-11-01

The Swedish Air Force (SwAF) conducted a study in 2010 to harmonize portrayal of aeronautical info (AI) on SwAF charts with NATO standards. A mismatch was found concerning vertical obstructions (VO). Norway regarded Sweden's existing symbology as a way to solve the problem of overcrowded air charts and the two countries started to cooperate. The result of this development was a new set of symbology for obstacles. The aim of this study was to test the readability of the new obstacle and power line symbols compared to the old symbols. We also wished to assess the readability in NVG illumination conditions, particularly regarding the new symbols compared to the old. In a randomized controlled study design, 21 volunteer military pilots from the Norwegian and Swedish Air Force were asked to perform tracking and chart-reading tests. The chart-reading test scored both errors and readability using a predefined score index. Subjective scoring was also done at the end of the test day. Overall response time improved by approximately 20% using the new symbology and error rate decreased by approximately 30-90% where statistically significant differences were found. The tracking test turned out to be too difficult due to several factors in the experimental design. Even though some caution should be shown in drawing conclusions from this study, the general trends seem well supported with the number of aircrew subjects we were able to recruit.Wagstaff AS, Larsen T. Readability of new aviation chart symbology in day and NVG reading conditions. Aerosp Med Hum Perform. 2017; 88(11):978-984.

40 CFR 240.202-2 - Recommended procedures: Design.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Design. 240.202-2 Section 240.202-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...

40 CFR 240.211-2 - Recommended procedures: Design.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.211-2 Section 240.211-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...

40 CFR 240.200-2 - Recommended procedures: Design.

Code of Federal Regulations, 2011 CFR

2011-07-01

....200-2 Section 240.200-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.200-2 Recommended procedures: Design. (a) In addition to the residential and commercial wastes...

40 CFR 240.200-2 - Recommended procedures: Design.

Code of Federal Regulations, 2010 CFR

2010-07-01

....200-2 Section 240.200-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.200-2 Recommended procedures: Design. (a) In addition to the residential and commercial wastes...

40 CFR 240.209-2 - Recommended procedures: Design.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.209-2 Section 240.209-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...

40 CFR 240.202-2 - Recommended procedures: Design.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.202-2 Section 240.202-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...

40 CFR 240.210-2 - Recommended procedures: Design.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.210-2 Section 240.210-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...

40 CFR 240.206-2 - Recommended procedures: Design.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.206-2 Section 240.206-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...

40 CFR 240.200-2 - Recommended procedures: Design.

Code of Federal Regulations, 2013 CFR

2013-07-01

... processing. These include: Certain bulky wastes (e.g., combustible demolition and construction debris, tree... WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.200-2 Recommended procedures: Design. (a) In addition to the residential and commercial wastes...

Psychrometric chart for physiological research

NASA Technical Reports Server (NTRS)

Chambers, A. B.

1971-01-01

Chart facilitates use of graphical techniques for solving problems involving thermodynamic properties of moist air. The properties are presented, and their units of measurement are listed. Chart presenting conditions at standard atmosphere pressure at sea level is most useful.

Differences in presenting advance directives in the chart, in the minimum data set, and through the staff's perceptions.

PubMed

Cohen-Mansfield, Jiska; Libin, Alexander; Lipson, Steven

2003-06-01

Decisions concerning end-of-life care depend on information contained in advance directives that are documented in residents' charts in the nursing home. The availability of that information depends on the quality of the chart and on the location of the information in the chart. No research was found that compared directives by the manner in which they are collected and summarized in the chart. The goal of the proposed study was to clarify how advance directives are summarized in the patient's record and to clarify how physicians perceive the same advance directives and formal orders. The study involved 122 elderly persons who reside in one large (587 beds) nursing home. The authors collected data regarding the advance directives from three sources-Minimum Data Set (MDS), the front cover of the resident's chart, and from inside the chart. The rates of documented advance directives found in this study are higher than those reported in the literature. Agreement rates between sources varied as a function of which sources were compared, as well as on the basis of which directive was examined. More specifically, the authors found higher rates of agreement between the information inside the chart and on the cover of the chart than between the MDS and the other two sources. The reasons for discrepancies may lie in the different functions and procedures pertaining to these source documents.

15 CFR 922.20 - Standards and procedures for designation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... COASTAL RESOURCE MANAGEMENT NATIONAL MARINE SANCTUARY PROGRAM REGULATIONS Designation of National Marine Sanctuaries § 922.20 Standards and procedures for designation. In designating a National Marine Sanctuary, the...

Study of design constraints on helicopter noise

NASA Technical Reports Server (NTRS)

Sternfeld, H., Jr.; Wiedersum, C. W.

1979-01-01

A means of estimating the noise generated by a helicopter main rotor using information which is generally available during the preliminary design phase of aircraft development is presented. The method utilizes design charts and tables which do not require an understanding of acoustical theory or computational procedures in order to predict the perceived noise level, a weighted sound pressure level, or C weighted sound pressure level of a single hovering rotor. A method for estimating the effective perceived noise level in forward flight is also included. In order to give the designer an assessment of the relative rotor performance, which may be traded off against noise, an additional chart for estimating the percent of available rotor thrust which must be expended in lifting the rotor and drive system, is included as well as approach for comparing the subjective acceptability of various rotors once the absolute sound pressure levels are predicted.

Charts Showing Relations Among Primary Aerodynamic Variables for Helicopter-performance Estimation

NASA Technical Reports Server (NTRS)

Talkin, Herbert W

1947-01-01

In order to facilitate solutions of the general problem of helicopter selection, the aerodynamic performance of rotors is presented in the form of charts showing relations between primary design and performance variables. By the use of conventional helicopter theory, certain variables are plotted and other variables are considered fixed. Charts constructed in such a manner show typical results, trends, and limits of helicopter performance. Performance conditions considered include hovering, horizontal flight, climb, and ceiling. Special problems discussed include vertical climb and the use of rotor-speed-reduction gears for hovering.

TU-D-201-02: Medical Physics Practices for Plan and Chart Review: Results of AAPM Task Group 275 Survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fong de los Santos, L; Dong, L; Greener, A

Purpose: AAPM Task Group (TG) 275 is charged with developing riskbased guidelines for plan and chart review clinical processes. As part of this work an AAPM-wide survey was conducted to gauge current practices. Methods: The survey consisted of 103 multiple-choice questions covering the following review processes for external beam including protons: 1) Initial Plan Check, 2) On-Treatment and 3) End-of-Treatment Chart Check. The survey was designed and validated by TG members with the goal of providing an efficient and easy response process. The survey, developed and deployed with the support of AAPM headquarters, was released to all AAPM members whomore » have self-reported as working in the radiation oncology field and it was kept open for 7 weeks. Results: There are an estimated 4700 eligible participants. At the time of writing, 962 completed surveys have been collected with an average completion time of 24 minutes. Participants are mainly from community hospitals (40%), academicaffiliated hospitals (31%) and free-standing clinics (18%). Among many other metrics covered on the survey, results so far indicate that manual review is an important component on the plan and chart review process (>90%) and that written procedures and checklists are widely used (>60%). However, the details of what is reviewed or checked are fairly heterogeneous among the sampled medical physics community. Conclusion: The data gathered from the survey gauging current practices will be used by TG 275 to develop benchmarks and recommendations for the type and extent of checks to perform effective physics plan and chart review processes.« less

47 CFR 7.18 - Procedure; designation of agents for service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Procedure; designation of agents for service. 7.18 Section 7.18 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO VOICEMAIL AND INTERACTIVE MENU SERVICES AND EQUIPMENT BY PEOPLE WITH DISABILITIES Enforcement § 7.18 Procedure; designation...

47 CFR 7.18 - Procedure; designation of agents for service.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Procedure; designation of agents for service. 7.18 Section 7.18 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO VOICEMAIL AND INTERACTIVE MENU SERVICES AND EQUIPMENT BY PEOPLE WITH DISABILITIES Enforcement § 7.18 Procedure; designation...

47 CFR 7.18 - Procedure; designation of agents for service.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Procedure; designation of agents for service. 7.18 Section 7.18 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO VOICEMAIL AND INTERACTIVE MENU SERVICES AND EQUIPMENT BY PEOPLE WITH DISABILITIES Enforcement § 7.18 Procedure; designation...

47 CFR 7.18 - Procedure; designation of agents for service.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Procedure; designation of agents for service. 7.18 Section 7.18 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO VOICEMAIL AND INTERACTIVE MENU SERVICES AND EQUIPMENT BY PEOPLE WITH DISABILITIES Enforcement § 7.18 Procedure; designation...

47 CFR 7.18 - Procedure; designation of agents for service.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Procedure; designation of agents for service. 7.18 Section 7.18 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO VOICEMAIL AND INTERACTIVE MENU SERVICES AND EQUIPMENT BY PEOPLE WITH DISABILITIES Enforcement § 7.18 Procedure; designation...

The Conjugate Acid-Base Chart.

ERIC Educational Resources Information Center

Treptow, Richard S.

1986-01-01

Discusses the difficulties that beginning chemistry students have in understanding acid-base chemistry. Describes the use of conjugate acid-base charts in helping students visualize the conjugate relationship. Addresses chart construction, metal ions, buffers and pH titrations, and the organic functional groups and nonaqueous solvents. (TW)

Comparison of the Handy Eye Chart and the Lea Symbols Chart in a population of deaf children aged 7–18 years

PubMed Central

Gorham, John Paul; Bruce, Beau B.; Hutchinson, Amy K.

2016-01-01

Purpose To compare the results of visual acuity testing in a population of deaf children using the Handy Eye Chart versus the Lea Symbols Chart and to compare testability and preference between charts. Methods A total of 24 participants were recruited at the Atlanta Area School for the Deaf. Visual Acuity was evaluated using the Handy Eye Chart and the Lea Symbols Chart. Patient preference and duration of testing were measured. Results The mean difference between the visual acuity as measured by each chart was –0.02 logMAR (95% CI, −0.06 to 0.03). Testing with the Handy Eye Chart was an average of 13.79 seconds faster than testing with the Lea Symbols Chart (95% CI, 1.1–26.47; P = 0.03). Of the 24 participants, 17 (71%) preferred the Handy Eye Chart (95% CI: 49%–87%; P = 0.07). Conclusions The Handy Eye Chart is a fast, valid, and preferred tool for measuring visual acuity in deaf children age 7–18 years. Additional research is needed to evaluate the utility of the Handy Eye Chart in younger children and deaf adults. PMID:27164427

Enhancing learning using questions, adjunct to science charts

NASA Astrophysics Data System (ADS)

Holliday, William G.; Benson, Garth

This study supported two hypotheses. First, adjunct questions interacted with a science chart so powerfully that content established as difficult to learn in the pilot and in this study's control groups became easier to learn when charted. Second, students familiar with the chart test before instruction (test exposure) were better prepared to take this test after instruction. This adjunct-question study examined the generalizability of selective-attention and academic-studying hypotheses to a modified science chart medium. About 300 high school students were randomly assigned to four conditions each including a vitamin chart (chart only, test exposure, importance of questions emphasized to students by teachers, and combinational conditions - test exposure and question importance) across 16 biology classrooms. Then these same students were again randomly assigned within each classroom to a control and to four question treatments no questions, questions focusing on easy-to-learn charted content, questions focusing on difficult-to-learn charted content, and a combinational treatment.

Enhancing learning using questions adjunct to science charts

NASA Astrophysics Data System (ADS)

Holliday, William G.; Benson, Garth

This study supported two hypotheses. First, adjunct questions interacted with a science chart so powerfully that content established as difficult to learn in the pilot and in this study's control groups became easier to learn when charted. Second, students familiar with the chart test before instruction (test exposure) were better prepared to take this test after instruction. This adjunct-question study examined the generalizability of selective-attention and academic-studying hypotheses to a modified science chart medium. About 300 high school students were randomly assigned to four conditions each including a vitamin chart (chart only, test exposure, importance of questions emphasized to students by teachers, and combinational conditions--test exposure and question importance) across 16 biology classrooms. Then these same students were again randomly assigned within each classroom to a control and to four question treatments (no questions, questions focusing on easy-to-learn charted content, questions focusing on difficult-to-learn charted content, and a combinational treatment).

Optimized Design and Analysis of Sparse-Sampling fMRI Experiments

PubMed Central

Perrachione, Tyler K.; Ghosh, Satrajit S.

2013-01-01

Sparse-sampling is an important methodological advance in functional magnetic resonance imaging (fMRI), in which silent delays are introduced between MR volume acquisitions, allowing for the presentation of auditory stimuli without contamination by acoustic scanner noise and for overt vocal responses without motion-induced artifacts in the functional time series. As such, the sparse-sampling technique has become a mainstay of principled fMRI research into the cognitive and systems neuroscience of speech, language, hearing, and music. Despite being in use for over a decade, there has been little systematic investigation of the acquisition parameters, experimental design considerations, and statistical analysis approaches that bear on the results and interpretation of sparse-sampling fMRI experiments. In this report, we examined how design and analysis choices related to the duration of repetition time (TR) delay (an acquisition parameter), stimulation rate (an experimental design parameter), and model basis function (an analysis parameter) act independently and interactively to affect the neural activation profiles observed in fMRI. First, we conducted a series of computational simulations to explore the parameter space of sparse design and analysis with respect to these variables; second, we validated the results of these simulations in a series of sparse-sampling fMRI experiments. Overall, these experiments suggest the employment of three methodological approaches that can, in many situations, substantially improve the detection of neurophysiological response in sparse fMRI: (1) Sparse analyses should utilize a physiologically informed model that incorporates hemodynamic response convolution to reduce model error. (2) The design of sparse fMRI experiments should maintain a high rate of stimulus presentation to maximize effect size. (3) TR delays of short to intermediate length can be used between acquisitions of sparse-sampled functional image volumes to increase

Techno-economıc Analysıs of Evacuated Tube Solar Water Heater usıng F-chart Method

NASA Astrophysics Data System (ADS)

Fayaz, H.; Rahim, N. A.; Saidur, R.; Hasanuzzaman, M.

2018-05-01

Solar thermal utilization, especially the application of solar water heater technology, has developed rapidly in recent decades. Solar water heating systems based on thermal collector alone or connected with photovoltaic called as photovoltaic-thermal (PVT) are practical applications to replace the use of electrical water heaters but weather dependent performance of these systems is not linear. Therefore on the basis of short term or average weather conditions, accurate analysis of performance is quite difficult. The objective of this paper is to show thermal and economic analysis of evacuated tube collector solar water heaters. Analysis done by F-Chart shows that evacuated tube solar water heater achieves fraction value of 1 to fulfil hot water demand of 150liters and above per day for a family without any auxiliary energy usage. Evacuated tube solar water heater show life cycle savings of RM 5200. At water set temperature of 100°C, RM 12000 is achieved and highest life cycle savings of RM 6100 at the environmental temperature of 18°C are achieved. Best thermal and economic performance is obtained which results in reduction of household greenhouse gas emissions, reduction of energy consumption and saves money on energy bills.

Design Guidance for Computer-Based Procedures for Field Workers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna; Le Blanc, Katya; Bly, Aaron

Nearly all activities that involve human interaction with nuclear power plant systems are guided by procedures, instructions, or checklists. Paper-based procedures (PBPs) currently used by most utilities have a demonstrated history of ensuring safety; however, improving procedure use could yield significant savings in increased efficiency, as well as improved safety through human performance gains. The nuclear industry is constantly trying to find ways to decrease human error rates, especially human error rates associated with procedure use. As a step toward the goal of improving field workers’ procedure use and adherence and hence improve human performance and overall system reliability, themore » U.S. Department of Energy Light Water Reactor Sustainability (LWRS) Program researchers, together with the nuclear industry, have been investigating the possibility and feasibility of replacing current paper-based procedures with computer-based procedures (CBPs). PBPs have ensured safe operation of plants for decades, but limitations in paper-based systems do not allow them to reach the full potential for procedures to prevent human errors. The environment in a nuclear power plant is constantly changing, depending on current plant status and operating mode. PBPs, which are static by nature, are being applied to a constantly changing context. This constraint often results in PBPs that are written in a manner that is intended to cover many potential operating scenarios. Hence, the procedure layout forces the operator to search through a large amount of irrelevant information to locate the pieces of information relevant for the task and situation at hand, which has potential consequences of taking up valuable time when operators must be responding to the situation, and potentially leading operators down an incorrect response path. Other challenges related to use of PBPs are management of multiple procedures, place-keeping, finding the correct procedure for a task, and

Logarithmic temporal axis manipulation and its application for measuring auditory contributions in F0 control using a transformed auditory feedback procedure

NASA Astrophysics Data System (ADS)

Yanaga, Ryuichiro; Kawahara, Hideki

2003-10-01

A new parameter extraction procedure based on logarithmic transformation of the temporal axis was applied to investigate auditory effects on voice F0 control to overcome artifacts due to natural fluctuations and nonlinearities in speech production mechanisms. The proposed method may add complementary information to recent findings reported by using frequency shift feedback method [Burnett and Larson, J. Acoust. Soc. Am. 112 (2002)], in terms of dynamic aspects of F0 control. In a series of experiments, dependencies of system parameters in F0 control on subjects, F0 and style (musical expressions and speaking) were tested using six participants. They were three male and three female students specialized in musical education. They were asked to sustain a Japanese vowel /a/ for about 10 s repeatedly up to 2 min in total while hearing F0 modulated feedback speech, that was modulated using an M-sequence. The results replicated qualitatively the previous finding [Kawahara and Williams, Vocal Fold Physiology, (1995)] and provided more accurate estimates. Relations with designing an artificial singer also will be discussed. [Work partly supported by the grant in aids in scientific research (B) 14380165 and Wakayama University.

An ex ante control chart for project monitoring using earned duration management observations

NASA Astrophysics Data System (ADS)

Mortaji, Seyed Taha Hossein; Noori, Siamak; Noorossana, Rassoul; Bagherpour, Morteza

2017-12-01

In the past few years, there has been an increasing interest in developing project control systems. The primary purpose of such systems is to indicate whether the actual performance is consistent with the baseline and to produce a signal in the case of non-compliance. Recently, researchers have shown an increased interest in monitoring project's performance indicators, by plotting them on the Shewhart-type control charts over time. However, these control charts are fundamentally designed for processes and ignore project-specific dynamics, which can lead to weak results and misleading interpretations. By paying close attention to the project baseline schedule and using statistical foundations, this paper proposes a new ex ante control chart which discriminates between acceptable (as-planned) and non-acceptable (not-as-planned) variations of the project's schedule performance. Such control chart enables project managers to set more realistic thresholds leading to a better decision making for taking corrective and/or preventive actions. For the sake of clarity, an illustrative example has been presented to show how the ex ante control chart is constructed in practice. Furthermore, an experimental investigation has been set up to analyze the performance of the proposed control chart. As expected, the results confirm that, when a project starts to deflect significantly from the project's baseline schedule, the ex ante control chart shows a respectable ability to detect and report right signals while avoiding false alarms.

46 CFR 154.180 - Contiguous hull structure: Welding procedure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous hull structure: Welding procedure. 154.180... Equipment Hull Structure § 154.180 Contiguous hull structure: Welding procedure. Welding procedure tests for contiguous hull structure designed for a temperature colder than −18 °C (0 °F) must meet § 54.05-15 and...

Effluent Charts Help | ECHO | US EPA

EPA Pesticide Factsheets

Effluent Charts present dynamic charts and tables of permitted effluent limits, releases, and violations over time for Clean Water Act (CWA) wastewater discharge permits issued under the National Pollutant Discharge Elimination System (NPDES).

Representativeness comparisons of nurse and computer charting of heart rate across nursing-intensity protocols.

PubMed

Luna, Jorge M; Yip, Natalie; Pivovarov, Rimma; Vawdrey, David K

2016-08-01

Clinical teams in acute inpatient settings can greatly benefit from automated charting technologies that continuously monitor patient vital status. NewYork-Presbyterian has designed and developed a real-time patient monitoring system that integrates vital signs sensors, networking, and electronic health records, to allow for automatic charting of patient status. We evaluate the representativeness (a combination of agreement, safety and timing) of a core vital sign across nursing intensity care protocols for preliminary feasibility assessment. Our findings suggest an automated way of summarizing heart rate provides representation of true heart rate status and can facilitate alternatives approaches to burdensome manual nurse charting of physiological parameters.

Pilot study on the feasibility of a computerized speech recognition charting system.

PubMed

Feldman, C A; Stevens, D

1990-08-01

The objective of this study was to determine the feasibility of developing and using a voice recognition computerized charting system to record dental clinical examination data. More specifically, the study was designed to analyze the time and error differential between the traditional examiner/recorder method (ASSISTANT) and computerized voice recognition method (VOICE). DMFS examinations were performed twice on 20 patients using the traditional ASSISTANT and the VOICE charting system. A statistically significant difference was found when comparing the mean ASSISTANT time of 2.69 min to the VOICE time of 3.72 min (P less than 0.001). No statistically significant difference was found when comparing the mean ASSISTANT recording errors of 0.1 to VOICE recording errors of 0.6 (P = 0.059). 90% of the patients indicated they felt comfortable with the dentist talking to a computer and only 5% of the sample indicated they opposed VOICE. Results from this pilot study indicate that a charting system utilizing voice recognition technology could be considered a viable alternative to traditional examiner/recorder methods of clinical charting.

7 CFR 15f.2 - Who may use these procedures for processing their discrimination complaint with USDA?

Code of Federal Regulations, 2013 CFR

2013-01-01

... discrimination complaint with USDA? 15f.2 Section 15f.2 Agriculture Office of the Secretary of Agriculture... USDA? A person may use these procedures if he or she filed a nonemployment related discrimination complaint with USDA prior to July 1, 1997, that alleged discrimination by USDA at any time during the period...

7 CFR 15f.2 - Who may use these procedures for processing their discrimination complaint with USDA?

Code of Federal Regulations, 2011 CFR

2011-01-01

... discrimination complaint with USDA? 15f.2 Section 15f.2 Agriculture Office of the Secretary of Agriculture... USDA? A person may use these procedures if he or she filed a nonemployment related discrimination complaint with USDA prior to July 1, 1997, that alleged discrimination by USDA at any time during the period...

7 CFR 15f.2 - Who may use these procedures for processing their discrimination complaint with USDA?

Code of Federal Regulations, 2014 CFR

2014-01-01

... discrimination complaint with USDA? 15f.2 Section 15f.2 Agriculture Office of the Secretary of Agriculture... USDA? A person may use these procedures if he or she filed a nonemployment related discrimination complaint with USDA prior to July 1, 1997, that alleged discrimination by USDA at any time during the period...

7 CFR 15f.2 - Who may use these procedures for processing their discrimination complaint with USDA?

Code of Federal Regulations, 2012 CFR

2012-01-01

... discrimination complaint with USDA? 15f.2 Section 15f.2 Agriculture Office of the Secretary of Agriculture... USDA? A person may use these procedures if he or she filed a nonemployment related discrimination complaint with USDA prior to July 1, 1997, that alleged discrimination by USDA at any time during the period...

7 CFR 15f.2 - Who may use these procedures for processing their discrimination complaint with USDA?

Code of Federal Regulations, 2010 CFR

2010-01-01

... discrimination complaint with USDA? 15f.2 Section 15f.2 Agriculture Office of the Secretary of Agriculture... USDA? A person may use these procedures if he or she filed a nonemployment related discrimination complaint with USDA prior to July 1, 1997, that alleged discrimination by USDA at any time during the period...

Mapping quantitative trait loci for binary trait in the F2:3 design.

PubMed

Zhu, Chengsong; Zhang, Yuan-Ming; Guo, Zhigang

2008-12-01

In the analysis of inheritance of quantitative traits with low heritability, an F(2:3) design that genotypes plants in F(2) and phenotypes plants in F(2:3) progeny is often used in plant genetics. Although statistical approaches for mapping quantitative trait loci (QTL) in the F(2:3) design have been well developed, those for binary traits of biological interest and economic importance are seldom addressed. In this study, an attempt was made to map binary trait loci (BTL) in the F(2:3) design. The fundamental idea was: the F(2) plants were genotyped, all phenotypic values of each F(2:3) progeny were measured for binary trait, and these binary trait values and the marker genotype informations were used to detect BTL under the penetrance and liability models. The proposed method was verified by a series of Monte-Carlo simulation experiments. These results showed that maximum likelihood approaches under the penetrance and liability models provide accurate estimates for the effects and the locations of BTL with high statistical power, even under of low heritability. Moreover, the penetrance model is as efficient as the liability model, and the F(2:3) design is more efficient than classical F(2) design, even though only a single progeny is collected from each F(2:3) family. With the maximum likelihood approaches under the penetrance and the liability models developed in this study, we can map binary traits as we can do for quantitative trait in the F(2:3) design.

Comparison of visual acuity estimates using three different letter charts under two ambient room illuminations

PubMed Central

Chen, Ai-Hong; Norazman, Fatin Nur Najwa; Buari, Noor Halilah

2012-01-01

Background: Visual acuity is an essential estimate to assess ability of the visual system and is used as an indicator of ocular health status. Aim: The aim of this study is to investigate the consistency of acuity estimates from three different clinical visual acuity charts under two levels of ambient room illumination. Materials and Methods: This study involved thirty Malay university students aged between 19 and 23 years old (7 males, 23 females), with their spherical refractive error ranging between plano and –7.75D, astigmatism ranging from plano to –1.75D, anisometropia less than 1.00D and with no history of ocular injury or pathology. Right eye visual acuity (recorded in logMAR unit) was measured with Snellen letter chart (Snellen), wall mounted letter chart (WM) and projected letter chart (PC) under two ambient room illuminations, room light on and room light off. Results: Visual acuity estimates showed no statistically significant difference when measured with the room light on and with the room light off (F1,372 = 0.26, P = 0.61). Post-hoc analysis with Tukey showed that visual acuity estimates were significantly different between the Snellen and PC (P = 0.009) and between Snellen and WM (P = 0.002). Conclusions: Different levels of ambient room illumination had no significant effect on visual acuity estimates. However, the discrepancies in estimates of visual acuity noted in this study were purely due to the type of letter chart used. PMID:22446903

Simplified hydrodynamic analysis on the general shape of the hill charts of Francis turbines using shroud-streamline modeling

NASA Astrophysics Data System (ADS)

Iliev, I.; Trivedi, C.; Dahlhaug, O. G.

2018-06-01

The paper presents a simplified one-dimensional calculation of the efficiency hill-chart for Francis turbines, based on the velocity triangles at the inlet and outlet of the runner’s blade. Calculation is done for one streamline, namely the shroud streamline in the meridional section, where an efficiency model is established and iteratively approximated in order to satisfy the Euler equation for turbomachines at a wide operating range around the best efficiency point (BEP). Using the presented method, hill charts are calculated for one splitter-bladed Francis turbine runner and one Reversible Pump-Turbine (RPT) runner operated in the turbine mode. Both turbines have similar and relatively low specific speeds of nsQ = 23.3 and nsQ = 27, equal inlet and outlet diameters and are designed to fit in the same turbine rig for laboratory measurements (i.e. spiral casing and draft tube are the same). Calculated hill charts are compared against performance data obtained experimentally from model tests according to IEC standards for both turbines. Good agreement between theoretical and experimental results is observed when comparing the shapes of the efficiency contours in the hill-charts. The simplified analysis identifies the design parameters that defines the general shape and inclination of the turbine’s hill charts and, with some additional improvements in the loss models used, it can be used for quick assessment of the performance at off-design conditions during the design process of hydraulic turbines.

prepare_taxa_charts.py: A Python program to automate generation of publication ready taxonomic pie chart images from QIIME.

PubMed

Lakhujani, Vijay; Badapanda, Chandan

2017-06-01

QIIME (Quantitative Insights Into Microbial Ecology) is one of the most popular open-source bioinformatics suite for performing metagenome, 16S rRNA amplicon and Internal Transcribed Spacer (ITS) data analysis. Although, it is very comprehensive and powerful tool, it lacks a method to provide publication ready taxonomic pie charts. The script plot_taxa_summary . py bundled with QIIME generate a html file and a folder containing taxonomic pie chart and legend as separate images. The images have randomly generated alphanumeric names. Therefore, it is difficult to associate the pie chart with the legend and the corresponding sample identifier. Even if the option to have the legend within the html file is selected while executing plot_taxa_summary . py , it is very tedious to crop a complete image (having both the pie chart and the legend) due to unequal image sizes. It requires a lot of time to manually prepare the pie charts for multiple samples for publication purpose. Moreover, there are chances of error while identifying the pie chart and legend pair due to random alphanumeric names of the images. To bypass all these bottlenecks and make this process efficient, we have developed a python based program, prepare_taxa_charts . py , to automate the renaming, cropping and merging of taxonomic pie chart and corresponding legend image into a single, good quality publication ready image. This program not only augments the functionality of plot_taxa_summary . py but is also very fast in terms of CPU time and user friendly.

Charting Early Trajectories of Executive Control with the Shape School

ERIC Educational Resources Information Center

Clark, Caron A. C.; Sheffield, Tiffany D.; Chevalier, Nicolas; Nelson, Jennifer Mize; Wiebe, Sandra A.; Espy, Kimberly Andrews

2013-01-01

Despite acknowledgement of the importance of executive control for learning and behavior, there is a dearth of research charting its developmental trajectory as it unfolds against the background of children's sociofamilial milieus. Using a prospective, cohort-sequential design, this study describes growth trajectories for inhibitory control…

Performance Charts for the Turbojet Engine

NASA Technical Reports Server (NTRS)

Pinkel, Benjamin; Karp, Irving M.

1947-01-01

Charts are presented for computing the thrust, fuel consumption, and other performance values of a turbojet engine for any given set of operating conditions and component efficiencies. The effects of the pressure losses in the inlet duct and combustion chamber, the variation in the physical properties of the gas as it passes through the cycle, and the change in mass flow by the addition of fuel are included. The principle performance charts show the effects of the primary variables and correction charts provide the effects of the secondary variables.

f-treeGC: a questionnaire-based family tree-creation software for genetic counseling and genome cohort studies.

PubMed

Tokutomi, Tomoharu; Fukushima, Akimune; Yamamoto, Kayono; Bansho, Yasushi; Hachiya, Tsuyoshi; Shimizu, Atsushi

2017-07-14

The Tohoku Medical Megabank project aims to create a next-generation personalized healthcare system by conducting large-scale genome-cohort studies involving three generations of local residents in the areas affected by the Great East Japan Earthquake. We collected medical and genomic information for developing a biobank to be used for this healthcare system. We designed a questionnaire-based pedigree-creation software program named "f-treeGC," which enables even less experienced medical practitioners to accurately and rapidly collect family health history and create pedigree charts. f-treeGC may be run on Adobe AIR. Pedigree charts are created in the following manner: 1) At system startup, the client is prompted to provide required information on the presence or absence of children; f-treeGC is capable of creating a pedigree up to three generations. 2) An interviewer fills out a multiple-choice questionnaire on genealogical information. 3) The information requested includes name, age, gender, general status, infertility status, pregnancy status, fetal status, and physical features or health conditions of individuals over three generations. In addition, information regarding the client and the proband, and birth order information, including multiple gestation, custody, multiple individuals, donor or surrogate, adoption, and consanguinity may be included. 4) f-treeGC shows only marriages between first cousins via the overlay function. 5) f-treeGC automatically creates a pedigree chart, and the chart-creation process is visible for inspection on the screen in real time. 6) The genealogical data may be saved as a file in the original format. The created/modified date and time may be changed as required, and the file may be password-protected and/or saved in read-only format. To enable sorting or searching from the database, the file name automatically contains the terms typed into the entry fields, including physical features or health conditions, by default. 7

Chart Audit and Chart Stimulated Recall as Methods of Needs Assessment in Continuing Professional Health Education.

ERIC Educational Resources Information Center

Affleck, Louise; Jennett, Penny

1998-01-01

Chart audit (assessment of patient medical records) is a cost-effective continuing-education needs-assessment method. Chart stimulated recall, in which physicians' memory of particular cases is stimulated by records, potentially increases content validity and exploration of clinical reasoning as well as the context of clinical decisions. (SK)

Academician V.F. Utkin, General Designer of Space Launch Systems

NASA Astrophysics Data System (ADS)

Konyukhov, S.; Novykov, O.

2002-01-01

Academician Vladimir Fedorovich Utkin was an outstanding scientist and designer of rocket and space machinery, Doctor of Technical Science, Professor, Twice Hero of Socialist Labor, Lenin Prize and USSR State Prize winner, bearer of six Orders of Lenin and many other government awards. For 19 years, 1971 - 1990, V. F. Utkin held a position of General Designer in Yuzhnoye SDO having inherited this post from Academician Mikhail Kuzmich Yangel - Yuhnoye's founder. From 1990 till 2000 V. F. Utkin headed Central Scientific Research Institute of Machinery of Russia (TsNIIMash) as its General Designer. Under leadership of V. F. Utkin Yuzhnoye SDO designed several generations of unique strategic missile systems that laid the foundation for Rocket Strategic Forces of the Soviet Union and Russia, subsequently, developed one of the largest high-performance liquid- propellant ICBM SS-18 (Satan), solid-propellant ICBM SS-24 designed for both silo and rail- road deployment, environment friendly Zenit launch vehicle, delivered more than three hundred military, scientific and environmental satellites with tasks. A series of complicated scientific and technical problems has been resolved, a number of unique designing and technological solutions has been implemented in course of development, e.g. separating and orbital warheads, pop-up launch of heavy missiles from a container, continuous and persistent combat duty of liquid-propellant missiles, missile tolerance to nuclear explosion damage, liberation of vessels from ice captivity in the Arctic Ocean using Cosmos-1500 satellite - ancestor of the Ocean satellite constellation designed for accomplishment of seafaring tasks. The existing Russian Program for Rocket and Space Machinery development was designed under leadership of V.F. Utkin.

Qualities of dental chart recording and coding.

PubMed

Chantravekin, Yosananda; Tasananutree, Munchulika; Santaphongse, Supitcha; Aittiwarapoj, Anchisa

2013-01-01

Chart recording and coding are the important processes in the healthcare informatics system, but there were only a few reports in the dentistry field. The objectives of this study are to study the qualities of dental chart recording and coding, as well as the achievement of lecture/workshop on this topic. The study was performed by auditing the patient's charts at the TU Dental Student Clinic from July 2011-August 2012. The chart recording mean scores ranged from 51.0-55.7%, whereas the errors in the coding process were presented in the coder part more than the doctor part. The lecture/workshop could improve the scores only in some topics.

Revised Indian Academy of Pediatrics 2015 growth charts for height, weight and body mass index for 5-18-year-old Indian children.

PubMed

Khadilkar, Vaman V; Khadilkar, Anuradha V

2015-01-01

Growth chart committee of Indian Academy of Pediatrics (IAP) has revised growth charts for 5-18-year-old Indian children in Jan 2015. The last IAP growth charts (2007) were based on data collected in 1989-92 which is now >2 decades old. India is in an economic and nutrition transition and hence growth pattern of Indian children has changed over last few years. Thus, it was necessary to produce contemporary, updated growth references for Indian children. The new IAP charts were prepared by collating data from nine groups who had published studies in indexed journals on growth from India in the last decade. Growth charts were constructed from a total of 87022 middle and upper socioeconomic class children (m 54086, f 32936) from all five zones of India. Data from middle and upper socioeconomic class children are likely to have higher prevalence of overweight and obesity and hence growth charts produced on such populations are likely to "normalize" obesity. To remove such unhealthy weights form the data, method suggested by World Health Organization was used to produce weight charts. Thus, the new IAP weight charts are much lower than the recently published studies on affluent Indian children. Since Indian's are at a higher risk of obesity-related cardiometabolic complications at lower body mass index (BMI), BMI charts adjusted for 23, and 27 adult equivalent cut-offs as per International obesity task force guidelines were constructed. IAP now recommends use of these new charts to replace the 2007 IAP charts.

A compendium of controlled diffusion blades generated by an automated inverse design procedure

NASA Technical Reports Server (NTRS)

Sanz, Jose M.

1989-01-01

A set of sample cases was produced to test an automated design procedure developed at the NASA Lewis Research Center for the design of controlled diffusion blades. The range of application of the automated design procedure is documented. The results presented include characteristic compressor and turbine blade sections produced with the automated design code as well as various other airfoils produced with the base design method prior to the incorporation of the automated procedure.

Comparison of reading speed with 3 different log-scaled reading charts.

PubMed

Buari, Noor Halilah; Chen, Ai-Hong; Musa, Nuraini

2014-01-01

A reading chart that resembles real reading conditions is important to evaluate the quality of life in terms of reading performance. The purpose of this study was to compare the reading speed of UiTM Malay related words (UiTM-Mrw) reading chart with MNread Acuity Chart and Colenbrander Reading Chart. Fifty subjects with normal sight were randomly recruited through randomized sampling in this study (mean age=22.98±1.65 years). Subjects were asked to read three different near charts aloud and as quickly as possible at random sequence. The charts were the UiTM-Mrw Reading Chart, MNread Acuity Chart and Colenbrander Reading Chart, respectively. The time taken to read each chart was recorded and any errors while reading were noted. Reading performance was quantified in terms of reading speed as words per minute (wpm). The mean reading speed for UiTM-Mrw Reading Chart, MNread Acuity Chart and Colenbrander Reading Chart was 200±30wpm, 196±28wpm and 194±31wpm, respectively. Comparison of reading speed between UiTM-Mrw Reading Chart and MNread Acuity Chart showed no significant difference (t=-0.73, p=0.72). The same happened with the reading speed between UiTM-Mrw Reading Chart and Colenbrander Reading Chart (t=-0.97, p=0.55). Bland and Altman plot showed good agreement between reading speed of UiTM-Mrw Reading Chart with MNread Acuity Chart with the Colenbrander Reading Chart. UiTM-Mrw Reading Chart in Malay language is highly comparable with standardized charts and can be used for evaluating reading speed. Copyright © 2013 Spanish General Council of Optometry. Published by Elsevier Espana. All rights reserved.

48 CFR 52.247-44 - F.o.b. Designated Air Carrier's Terminal, Point of Importation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false F.o.b. Designated Air... CLAUSES Text of Provisions and Clauses 52.247-44 F.o.b. Designated Air Carrier's Terminal, Point of... the delivery term is f.o.b. designated air carrier's terminal, point of importation: F.o.b. Designated...

48 CFR 52.247-43 - F.o.b. Designated Air Carrier's Terminal, Point of Exportation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false F.o.b. Designated Air... CLAUSES Text of Provisions and Clauses 52.247-43 F.o.b. Designated Air Carrier's Terminal, Point of... the delivery term is f.o.b. designated air carrier's terminal, point of exportation: F.o.b. Designated...

Safe Minimum Internal Temperature Chart

MedlinePlus

... Administrative Forms Standard Forms Skip Navigation Z7_0Q0619C0JGR010IFST1G5B10H1 Web Content Viewer (JSR 286) Actions ${title} Loading... / Topics / ... Chart / Safe Minimum Internal Temperature Chart Z7_0Q0619C0JGR010IFST1G5B10H3 Web Content Viewer (JSR 286) Actions ${title} Loading... Z7_ ...

49 CFR 236.718 - Chart, dog.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Chart, dog. 236.718 Section 236.718 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.718 Chart, dog. A...

49 CFR 236.718 - Chart, dog.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Chart, dog. 236.718 Section 236.718 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.718 Chart, dog. A...

49 CFR 236.718 - Chart, dog.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Chart, dog. 236.718 Section 236.718 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.718 Chart, dog. A...

49 CFR 236.718 - Chart, dog.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Chart, dog. 236.718 Section 236.718 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.718 Chart, dog. A...

49 CFR 236.718 - Chart, dog.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Chart, dog. 236.718 Section 236.718 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.718 Chart, dog. A...

Comparison of reading speed with 3 different log-scaled reading charts

PubMed Central

Buari, Noor Halilah; Chen, Ai-Hong; Musa, Nuraini

2014-01-01

Background A reading chart that resembles real reading conditions is important to evaluate the quality of life in terms of reading performance. The purpose of this study was to compare the reading speed of UiTM Malay related words (UiTM-Mrw) reading chart with MNread Acuity Chart and Colenbrander Reading Chart. Materials and methods Fifty subjects with normal sight were randomly recruited through randomized sampling in this study (mean age = 22.98 ± 1.65 years). Subjects were asked to read three different near charts aloud and as quickly as possible at random sequence. The charts were the UiTM-Mrw Reading Chart, MNread Acuity Chart and Colenbrander Reading Chart, respectively. The time taken to read each chart was recorded and any errors while reading were noted. Reading performance was quantified in terms of reading speed as words per minute (wpm). Results The mean reading speed for UiTM-Mrw Reading Chart, MNread Acuity Chart and Colenbrander Reading Chart was 200 ± 30 wpm, 196 ± 28 wpm and 194 ± 31 wpm, respectively. Comparison of reading speed between UiTM-Mrw Reading Chart and MNread Acuity Chart showed no significant difference (t = −0.73, p = 0.72). The same happened with the reading speed between UiTM-Mrw Reading Chart and Colenbrander Reading Chart (t = −0.97, p = 0.55). Bland and Altman plot showed good agreement between reading speed of UiTM-Mrw Reading Chart with MNread Acuity Chart with the Colenbrander Reading Chart. Conclusion UiTM-Mrw Reading Chart in Malay language is highly comparable with standardized charts and can be used for evaluating reading speed. PMID:25323642

Development of a base mix design procedure.

DOT National Transportation Integrated Search

1974-01-01

This paper reports an investigation into the development of a compaction procedure for base mixes containing aggregates of 1 1/2" (38 mm) maximum size. The specimens were made in a manner similar to that given in ASTM Designation 1561-71, except that...

Aerodynamic design of axisymmetric hypersonic wind-tunnel nozzles using least-squares/parabolized Navier-Stokes procedure

NASA Technical Reports Server (NTRS)

Korte, John J.

1992-01-01

A new procedure unifying the best of present classical design practices, CFD and optimization procedures, is demonstrated for designing the aerodynamic lines of hypersonic wind tunnel nozzles. This procedure can be employed to design hypersonic wind tunnel nozzles with thick boundary layers where the classical design procedure has been demonstrated to break down. Advantages of this procedure allow full utilization of powerful CFD codes in the design process, solves an optimization problem to determine the new contour, may be used to design new nozzles or improve sections of existing nozzles, and automatically compensates the nozzle contour for viscous effects as part of the unified design procedure.

46 CFR 154.615 - Design temperature below 0 °C (32 °F) and down to −55 °C (−67 °F).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Design temperature below 0 °C (32 °F) and down to â55... LIQUEFIED GASES Design, Construction and Equipment Materials § 154.615 Design temperature below 0 °C (32 °F... tanks and secondary barriers for a design temperature below 0 °C (32 °F) and down to −55 °C (−67 °F...

46 CFR 154.615 - Design temperature below 0 °C (32 °F) and down to −55 °C (−67 °F).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Design temperature below 0 °C (32 °F) and down to â55... LIQUEFIED GASES Design, Construction and Equipment Materials § 154.615 Design temperature below 0 °C (32 °F... tanks and secondary barriers for a design temperature below 0 °C (32 °F) and down to −55 °C (−67 °F...

Optimization of Blocked Designs in fMRI Studies

ERIC Educational Resources Information Center

Maus, Barbel; van Breukelen, Gerard J. P.; Goebel, Rainer; Berger, Martijn P. F.

2010-01-01

Blocked designs in functional magnetic resonance imaging (fMRI) are useful to localize functional brain areas. A blocked design consists of different blocks of trials of the same stimulus type and is characterized by three factors: the length of blocks, i.e., number of trials per blocks, the ordering of task and rest blocks, and the time between…

Smart Book Charts

NASA Technical Reports Server (NTRS)

Chinnapongse, Ronald L.

2015-01-01

Smart book charts for TPSM: Heatshield for Extreme Entry Environment Technology (HEEET), Conformal Ablative TPS (CA-TPS), 3D Woven Multifunctional Ablative TPS (3D MAT), and Adaptable, Deployable, Entry and Placement Technology (ADEPT).

Chart Card: feasibility of a tool for improving emergency department care in sickle cell disease.

PubMed

Neumayr, Lynne; Pringle, Steven; Giles, Stephen; Quirolo, Keith C; Paulukonis, Susan; Vichinsky, Elliott P; Treadwell, Marsha J

2010-11-01

Patients with sickle cell disease (SCD) are concerned with emergency department care, including time to treatment and staff attitudes and knowledge. Providers are concerned about rapid access to patient information and SCD treatment protocols. A software application that stores and retrieves encrypted personal medical information on a plastic credit card-sized Chart Card was designed. To determine the applicability and feasibility of the Chart Card on patient satisfaction with emergency department care and provider accessibility to patient information and care protocols. One-half of 44 adults (aged -18 years) and 50 children with SCD were randomized to either the Chart Card or usual care. Patient satisfaction was surveyed pre and post implementation of the Chart Card program, and emergency department staff was surveyed about familiarity with SCD treatment protocols. Patient satisfaction with emergency department care and efficacy in health care increased post Chart Card implementation. Providers valued immediate access to patient information and SCD treatment guidelines. The technology has potential for application in the treatment of other illnesses in other settings.

29 CFR 1926.1422 - Signals-hand signal chart.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 8 2014-07-01 2014-07-01 false Signals-hand signal chart. 1926.1422 Section 1926.1422 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Construction § 1926.1422 Signals—hand signal chart. Hand signal charts must be either posted on the equipment...

29 CFR 1926.1422 - Signals-hand signal chart.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 8 2013-07-01 2013-07-01 false Signals-hand signal chart. 1926.1422 Section 1926.1422 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Construction § 1926.1422 Signals—hand signal chart. Hand signal charts must be either posted on the equipment...

29 CFR 1926.1422 - Signals-hand signal chart.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 8 2012-07-01 2012-07-01 false Signals-hand signal chart. 1926.1422 Section 1926.1422 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Construction § 1926.1422 Signals—hand signal chart. Hand signal charts must be either posted on the equipment...

47 CFR 73.333 - Engineering charts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

47 CFR 73.333 - Engineering charts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

47 CFR 73.333 - Engineering charts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

47 CFR 73.333 - Engineering charts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

47 CFR 73.333 - Engineering charts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

On the design of flight-deck procedures

NASA Technical Reports Server (NTRS)

Degani, Asaf; Wiener, Earl L.

1994-01-01

In complex human-machine systems, operations, training, and standardization depend on a elaborate set of procedures which are specified and mandated by the operational management of the organization. The intent is to provide guidance to the pilots, to ensure a logical, efficient, safe, and predictable means of carrying out the mission objectives. In this report the authors examine the issue of procedure use and design from a broad viewpoint. The authors recommend a process which we call 'The Four P's:' philosophy, policies, procedures, and practices. We believe that if an organization commits to this process, it can create a set of procedures that are more internally consistent, less confusing, better respected by the flight crews, and that will lead to greater conformity. The 'Four-P' model, and the guidelines for procedural development in appendix 1, resulted from cockpit observations, extensive interviews with airline management and pilots, interviews and discussion at one major airframe manufacturer, and an examination of accident and incident reports. Although this report is based on airline operations, we believe that the principles may be applicable to other complex, high-risk systems, such as nuclear power production, manufacturing process control, space flight, and military operations.

46 CFR 154.625 - Design temperature below 0 °C (32 °F) and down to −165 °C (−265 °F).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Design temperature below 0 °C (32 °F) and down to â165... LIQUEFIED GASES Design, Construction and Equipment Materials § 154.625 Design temperature below 0 °C (32 °F... process piping for a design temperature below 0 °C (32 °F) and down to −165 °C (−265 °F) must meet § 56.50...

46 CFR 154.625 - Design temperature below 0 °C (32 °F) and down to −165 °C (−265 °F).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Design temperature below 0 °C (32 °F) and down to â165... LIQUEFIED GASES Design, Construction and Equipment Materials § 154.625 Design temperature below 0 °C (32 °F... process piping for a design temperature below 0 °C (32 °F) and down to −165 °C (−265 °F) must meet § 56.50...

Desktop publishing and validation of custom near visual acuity charts.

PubMed

Marran, Lynn; Liu, Lei; Lau, George

2008-11-01

Customized visual acuity (VA) assessment is an important part of basic and clinical vision research. Desktop computer based distance VA measurements have been utilized, and shown to be accurate and reliable, but computer based near VA measurements have not been attempted, mainly due to the limited spatial resolution of computer monitors. In this paper, we demonstrate how to use desktop publishing to create printed custom near VA charts. We created a set of six near VA charts in a logarithmic progression, 20/20 through 20/63, with multiple lines of the same acuity level, different letter arrangements in each line and a random noise background. This design allowed repeated measures of subjective accommodative amplitude without the potential artifact of familiarity of the optotypes. The background maintained a constant and spatial frequency rich peripheral stimulus for accommodation across the six different acuity levels. The paper describes in detail how pixel-wise accurate black and white bitmaps of Sloan optotypes were used to create the printed custom VA charts. At all acuity levels, the physical sizes of the printed custom optotypes deviated no more than 0.034 log units from that of the standard, satisfying the 0.05 log unit ISO criterion we used to demonstrate physical equivalence. Also, at all acuity levels, log unit differences in the mean target distance for which reliable recognition of letters first occurred for the printed custom optotypes compared to the standard were found to be below 0.05, satisfying the 0.05 log unit ISO criterion we used to demonstrate functional equivalence. It is possible to use desktop publishing to create custom near VA charts that are physically and functionally equivalent to standard VA charts produced by a commercial printing process.

Diagnostic Value of Run Chart Analysis: Using Likelihood Ratios to Compare Run Chart Rules on Simulated Data Series

PubMed Central

Anhøj, Jacob

2015-01-01

Run charts are widely used in healthcare improvement, but there is little consensus on how to interpret them. The primary aim of this study was to evaluate and compare the diagnostic properties of different sets of run chart rules. A run chart is a line graph of a quality measure over time. The main purpose of the run chart is to detect process improvement or process degradation, which will turn up as non-random patterns in the distribution of data points around the median. Non-random variation may be identified by simple statistical tests including the presence of unusually long runs of data points on one side of the median or if the graph crosses the median unusually few times. However, there is no general agreement on what defines “unusually long” or “unusually few”. Other tests of questionable value are frequently used as well. Three sets of run chart rules (Anhoej, Perla, and Carey rules) have been published in peer reviewed healthcare journals, but these sets differ significantly in their sensitivity and specificity to non-random variation. In this study I investigate the diagnostic values expressed by likelihood ratios of three sets of run chart rules for detection of shifts in process performance using random data series. The study concludes that the Anhoej rules have good diagnostic properties and are superior to the Perla and the Carey rules. PMID:25799549

Visual mining business service using pixel bar charts

NASA Astrophysics Data System (ADS)

Hao, Ming C.; Dayal, Umeshwar; Casati, Fabio

2004-06-01

Basic bar charts have been commonly available, but they only show highly aggregated data. Finding the valuable information hidden in the data is essential to the success of business. We describe a new visualization technique called pixel bar charts, which are derived from regular bar charts. The basic idea of a pixel bar chart is to present all data values directly instead of aggregating them into a few data values. Pixel bar charts provide data distribution and exceptions besides aggregated data. The approach is to represent each data item (e.g. a business transaction) by a single pixel in the bar chart. The attribute of each data item is encoded into the pixel color and can be accessed and drilled down to the detail information as needed. Different color mappings are used to represent multiple attributes. This technique has been prototyped in three business service applications-Business Operation Analysis, Sales Analysis, and Service Level Agreement Analysis at Hewlett Packard Laboratories. Our applications show the wide applicability and usefulness of this new idea.

Organization Charts in ARL Libraries. SPEC Kit #170.

ERIC Educational Resources Information Center

Association of Research Libraries, Washington, DC. Office of Management Studies.

This kit is based on a review of the organization charts of 71 member libraries of the Association of Research Libraries (ARL) gathered in January 1991, compared with an earlier SPEC Kit published in 1986, and contains charts of 29 of the libraries. A summary of the chart analyses presents information about the titles of library directors,…

The SHAFT Book (Design Charts for Torsional Properties of Non-Circular Shafts)

DTIC Science & Technology

1980-03-01

7870 .7906 .7944 .7864 .7903 .7968 .8048 . 7845 .7874 .7933 .8035 .8189 .7852 .7899 .7993 .8143 .8362 .7857 .7918 .8059 .8270 .8580 .7862 .7950 .8113...similar manner to equation 4): Ch h2V2f0= A(f1 +f3) +B(f2 +f4) +— (f2-f4) 2Rr - (A + B)2 f0 = h’D Eq (12) See figure A-6. 73 IRREGULAR...b2+b4) 4 1 Ch ba f k Ro b2(b2+b4) 2 b4(b2+b4) i Z2 f + r ] 1 2A_ ^ ^B_ _ Ch cb«-b4 j f ! bjbj b2b4

Stocking chart for upland central hardwoods

Treesearch

Martin E. Dale; Donald E. Hilt

1989-01-01

The upland hardwoods stocking chart, introduced by Gingrich in 1967, has become one of the forest manager's most useful tools. The chart allows you to determine the condition of the present stand in relation to a stocking standard. The stocking of a stand is extremely helpful in prescribing various silvicultural treatments such as intermediate thinnings,...

Engine Development Design Margins Briefing Charts

NASA Technical Reports Server (NTRS)

Bentz, Chuck

2006-01-01

New engines experience durability problems after entering service. The most prevalent and costly is the hot section, particularly the high-pressure turbine. The origin of durability problems can be traced back to: 1) the basic aero-mechanical design systems, assumptions, and design margins used by the engine designers, 2) the available materials systems, and 3) to a large extent, aggressive marketing in a highly competitive environment that pushes engine components beyond the demonstrated capability of the basic technology available for the hardware designs. Unfortunately the user must operate the engine in the service environment in order to learn the actual thrust loading and the time at max effort take-off conditions used in service are needed to determine the hot section life. Several hundred thousand hours of operational service will be required before the demonstrated reliability of a fleet of engines or the design deficiencies of the engine hot section parts can be determined. Also, it may take three to four engine shop visits for heavy maintenance on the gas path hardware to establish cost effective build standards. Spare parts drive the oerator's engine maintenance costs but spare parts also makes lots of money for the engine manufacturer during the service life of an engine. Unless competition prevails for follow-on engine buys, there is really no motivation for an OEM to spend internal money to improve parts durability and reduce earnings derived from a lucrative spare parts business. If the hot section life is below design goals or promised values, the OEM migh argue that the engine is being operated beyond its basic design intent. On the other hand, the airframer and the operator will continue to remind the OEM that his engine was selected based on a lot of promises to deliver spec thrust with little impact on engine service life if higher thrust is used intermittently. In the end, a standoff prevails and nothing gets fixed. This briefing will propose

A design procedure for the phase-controlled parallel-loaded resonant inverter

NASA Technical Reports Server (NTRS)

King, Roger J.

1989-01-01

High-frequency-link power conversion and distribution based on a resonant inverter (RI) has been recently proposed. The design of several topologies is reviewed, and a simple approximate design procedure is developed for the phase-controlled parallel-loaded RI. This design procedure seeks to ensure the benefits of resonant conversion and is verified by data from a laboratory 2.5 kVA, 20-kHz converter. A simple phasor analysis is introduced as a useful approximation for design purposes. The load is considered to be a linear impedance (or an ac current sink). The design procedure is verified using a 2.5-kVA 20-kHz RI. Also obtained are predictable worst-case ratings for each component of the resonant tank circuit and the inverter switches. For a given load VA requirement, below-resonance operation is found to result in a significantly lower tank VA requirement. Under transient conditions such as load short-circuit, a reversal of the expected commutation sequence is possible.

Performance Charts for a Turbojet System

NASA Technical Reports Server (NTRS)

Karp, Irving M.

1947-01-01

Convenient charts are presented for computing the thrust, fuel consumption, and other performance values of a turbojet system. These charts take into account the effects of ram pressure, compressor pressure ratio, ratio of combustion-chamber-outlet temperature to atmospheric temperature, compressor efficiency, turbine efficiency, combustion efficiency, discharge-nozzle coefficient, losses in total pressure in the inlet to the jet-propulsion unit and in the combustion chamber, and variation in specific heats with temperature. The principal performance charts show clearly the effects of the primary variables and correction charts provide the effects of the secondary variables. The performance of illustrative cases of turbojet systems is given. It is shown that maximum thrust per unit mass rate of air flow occurs at a lower compressor pressure ratio than minimum specific fuel consumption. The thrust per unit mass rate of air flow increases as the combustion-chamber discharge temperature increases. For minimum specific fuel consumption, however, an optimum combustion-chamber discharge temperature exists, which in some cases may be less than the limiting temperature imposed by the strength temperature characteristics of present materials.

Slotted Waveguide Antenna Stiffened Structures (SWASS) Development for Commercial Off-the-Shelf (COTS) Radar (Briefing Charts)

DTIC Science & Technology

2016-10-01

BRIEFING CHARTS) D. Zeppettella Structures Technology Branch Aerospace Vehicles Division Steve Bucca and Thomas Gage BerrieHill Research...R. WIPPERMAN, Chief Program Manager Structures Technology Branch Structures Technology Branch Aerospace Vehicles Division Aerospace Vehicles...Corporation) 5d. PROJECT NUMBER 4920 5e. TASK NUMBER 5f. WORK UNIT NUMBER Q06A 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING

Self-organization versus Watchmaker: ambiguity of molecular recognition and design charts of cellular circuitry.

PubMed

Kurakin, Alexei

2007-01-01

A large body of experimental evidence indicates that the specific molecular interactions and/or chemical conversions depicted as links in the conventional diagrams of cellular signal transduction and metabolic pathways are inherently probabilistic, ambiguous and context-dependent. Being the inevitable consequence of the dynamic nature of protein structure in solution, the ambiguity of protein-mediated interactions and conversions challenges the conceptual adequacy and practical usefulness of the mechanistic assumptions and inferences embodied in the design charts of cellular circuitry. It is argued that the reconceptualization of molecular recognition and cellular organization within the emerging interpretational framework of self-organization, which is expanded here to include such concepts as bounded stochasticity, evolutionary memory, and adaptive plasticity offers a significantly more adequate representation of experimental reality than conventional mechanistic conceptions do. Importantly, the expanded framework of self-organization appears to be universal and scale-invariant, providing conceptual continuity across multiple scales of biological organization, from molecules to societies. This new conceptualization of biological phenomena suggests that such attributes of intelligence as adaptive plasticity, decision-making, and memory are enforced by evolution at different scales of biological organization and may represent inherent properties of living matter. (c) 2007 John Wiley & Sons, Ltd.

A reliability-based cost effective fail-safe design procedure

NASA Technical Reports Server (NTRS)

Hanagud, S.; Uppaluri, B.

1976-01-01

The authors have developed a methodology for cost-effective fatigue design of structures subject to random fatigue loading. A stochastic model for fatigue crack propagation under random loading has been discussed. Fracture mechanics is then used to estimate the parameters of the model and the residual strength of structures with cracks. The stochastic model and residual strength variations have been used to develop procedures for estimating the probability of failure and its changes with inspection frequency. This information on reliability is then used to construct an objective function in terms of either a total weight function or cost function. A procedure for selecting the design variables, subject to constraints, by optimizing the objective function has been illustrated by examples. In particular, optimum design of stiffened panel has been discussed.

47 CFR 68.418 - Procedure; designation of agents for service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Procedure; designation of agents for service. 68.418 Section 68.418 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK Complaint Procedures § 68...

Direct method of design and stress analysis of rotating disks with temperature gradient

NASA Technical Reports Server (NTRS)

Manson, S S

1950-01-01

A method is presented for the determination of the contour of disks, typified by those of aircraft gas turbines, to incorporate arbitrary elastic-stress distributions resulting from either centrifugal or combined centrifugal and thermal effects. The specified stress may be radial, tangential, or any combination of the two. Use is made of the finite-difference approach in solving the stress equations, the amount of computation necessary in the evolution of a design being greatly reduced by the judicious selection of point stations by the aid of a design chart. Use of the charts and of a preselected schedule of point stations is also applied to the direct problem of finding the elastic and plastic stress distribution in disks of a given design, thereby effecting a great reduction in the amount of calculation. Illustrative examples are presented to show computational procedures in the determination of a new design and in analyzing an existing design for elastic stress and for stresses resulting from plastic flow.

17 CFR 240.13a-15 - Controls and procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... based must be a suitable, recognized control framework that is established by a body or group that has..., without limitation, controls and procedures designed to ensure that information required to be disclosed... disclosure. (f) The term internal control over financial reporting is defined as a process designed by, or...

17 CFR 240.13a-15 - Controls and procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... based must be a suitable, recognized control framework that is established by a body or group that has..., without limitation, controls and procedures designed to ensure that information required to be disclosed... disclosure. (f) The term internal control over financial reporting is defined as a process designed by, or...

49 CFR 192.111 - Design factor (F) for steel pipe.

Code of Federal Regulations, 2010 CFR

2010-10-01

... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.111 Design factor (F... street, or a railroad; (3) Is supported by a vehicular, pedestrian, railroad, or pipeline bridge; or (4...

A graphics-oriented personal computer-based microscope charting system for neuroanatomical and neurochemical studies.

PubMed

Tourtellotte, W G; Lawrence, D T; Getting, P A; Van Hoesen, G W

1989-07-01

This report describes a computerized microscope charting system based on the IBM personal computer or compatible. Stepping motors are used to control the movement of the microscope stage and to encode its position by hand manipulation of a joystick. Tissue section contours and the location of cells labeled with various compounds are stored by the computer, plotted at any magnification and manipulated into composites created from several charted sections. The system has many advantages: (1) it is based on an industry standardized computer that is affordable and familiar; (2) compact and commercially available stepping motor microprocessors control the stage movement. These controllers increase reliability, simplify implementation, and increase efficiency by relieving the computer of time consuming control tasks; (3) the system has an interactive graphics interface allowing the operator to view the image during data collection. Regions of the graphics display can be enlarged during the charting process to provide higher resolution and increased accuracy; (4) finally, the digitized data are stored at 0.5 micron resolution and can be routed directly to a multi-pen plotter or exported to a computer-aided design (CAD) program to generate a publication-quality montage composed of several computerized chartings. The system provides a useful tool for the acquisition and qualitative analysis of data representing stained cells or chemical markers in tissue. The modular design, together with data storage at high resolution, allows for potential analytical enhancements involving planimetric, stereologic and 3-D serial section reconstruction.

Optimization of pencil beam f-theta lens for high-accuracy metrology

NASA Astrophysics Data System (ADS)

Peng, Chuanqian; He, Yumei; Wang, Jie

2018-01-01

Pencil beam deflectometric profilers are common instruments for high-accuracy surface slope metrology of x-ray mirrors in synchrotron facilities. An f-theta optical system is a key optical component of the deflectometric profilers and is used to perform the linear angle-to-position conversion. Traditional optimization procedures of the f-theta systems are not directly related to the angle-to-position conversion relation and are performed with stops of large size and a fixed working distance, which means they may not be suitable for the design of f-theta systems working with a small-sized pencil beam within a working distance range for ultra-high-accuracy metrology. If an f-theta system is not well-designed, aberrations of the f-theta system will introduce many systematic errors into the measurement. A least-squares' fitting procedure was used to optimize the configuration parameters of an f-theta system. Simulations using ZEMAX software showed that the optimized f-theta system significantly suppressed the angle-to-position conversion errors caused by aberrations. Any pencil-beam f-theta optical system can be optimized with the help of this optimization method.

Inaccurate Dental Charting in an Audit of 1128 General Dental Practice Records.

PubMed

Brown, Nathan L; Jephcote, Victoria E L

2017-03-01

Fourteen dentists at different practices in the UK assessed the dental charts of 1128 patients who were new to the dentist but not new to the practice; 44% of the dental charts were found to be inaccurate. Inaccuracy of the individual practice-based charts ranged between 16% for the best performing practices to 83% for the worst: 5% of dental charts had too many teeth charted and 5% had too few teeth charted; 13% of charts had missed amalgam restorations and 18% had missed tooth-coloured restorations; 5% of charts had amalgam restorations recorded but with the surfaces incorrect (eg an MO restoration charted but a DO restoration actually present); 9% of charts had tooth-coloured restoration surfaces incorrectly recorded. For 7.5% of charts, amalgams were charted but not actually present. Other inaccuracies were also noted. The authors reinforce the requirements of the GDC, the advice of defence organizations, and the forensic importance of accurate dental charts. Clinical relevance: Dental charting forms part of the patient’s dental records, and the GDC requires dentists to maintain complete and accurate dental records.

Systems safety monitoring using the National Full-Scale Aerodynamic Complex Bar Chart Monitor

NASA Technical Reports Server (NTRS)

Jung, Oscar

1990-01-01

Attention is given to the Bar Chart Monitor system designed for safety monitoring of all model and facility test-related articles in wind tunnels. The system's salient features and its integration into the data acquisition system are discussed.

Simplified Approach Charts Improve Data Retrieval Performance

PubMed Central

Stewart, Michael; Laraway, Sean; Jordan, Kevin; Feary, Michael S.

2016-01-01

The effectiveness of different instrument approach charts to deliver minimum visibility and altitude information during airport equipment outages was investigated. Eighteen pilots flew simulated instrument approaches in three conditions: (a) normal operations using a standard approach chart (standard-normal), (b) equipment outage conditions using a standard approach chart (standard-outage), and (c) equipment outage conditions using a prototype decluttered approach chart (prototype-outage). Errors and retrieval times in identifying minimum altitudes and visibilities were measured. The standard-outage condition produced significantly more errors and longer retrieval times versus the standard-normal condition. The prototype-outage condition had significantly fewer errors and shorter retrieval times than did the standard-outage condition. The prototype-outage condition produced significantly fewer errors but similar retrieval times when compared with the standard-normal condition. Thus, changing the presentation of minima may reduce risk and increase safety in instrument approaches, specifically with airport equipment outages. PMID:28491009

42 CFR 5.3 - Procedures for designation of health professional(s) shortage areas.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Procedures for designation of health professional(s... SERVICES GENERAL PROVISIONS DESIGNATION OF HEALTH PROFESSIONAL(S) SHORTAGE AREAS § 5.3 Procedures for designation of health professional(s) shortage areas. (a) Using data available to the Department from national...

Radiation exposure to nuclear medicine staffs during 18F-FDG PET/CT procedures at Ramathibodi Hospital

NASA Astrophysics Data System (ADS)

Donmoon, T.; Chamroonrat, W.; Tuntawiroon, M.

2016-03-01

The aim of this study is to estimate the whole body and finger radiation doses per study received by nuclear medicine staff involved in dispensing, administration of 18F-FDG and interacting with radioactive patients during PET/CT imaging procedures in a PET/CT facility. The whole-body doses received by radiopharmacists, technologists and nurses were measured by electronic dosimeter and the finger doses by ring dosimeter during a period of 4 months. In 70 PET/CT studies, the mean whole-body dose per study to radiopharmacist, technologist, and nurse were 1.07±0.09, 1.77±0.46, μSv, and not detectable respectively. The mean finger doses per study received by radiopharmacist, technologist, and nurse were 265.65±107.55, 4.84±1.08 and 19.22±2.59 μSv, respectively. The average time in contact with 18F-FDG was 5.88±0.03, 39.06±1.89 and 1.21±0.02 minutes per study for radiopharmacist, technologist and nurse respectively. Technologists received highest mean effective whole- body dose per study and radiopharmacist received the highest finger dose per study. When compared with the ICRP dose limit, each individual worker can work with many more 18F- FDG PET/CT studies for a whole year without exceeding the occupational dose limits. This study confirmed that low levels of radiation does are received by our medical personnel involved in 18F-FDG PET/CT procedures.

A design procedure for a tension-wire stiffened truss-column

NASA Technical Reports Server (NTRS)

Greene, W. H.

1980-01-01

A deployable, tension wire stiffened, truss column configuration was considered for space structure applications. An analytical procedure, developed for design of the truss column and exercised in numerical studies, was based on equivalent beam stiffness coefficients in the classical analysis for an initially imperfect beam column. Failure constraints were formulated to be used in a combined weight/strength and nonlinear mathematical programming automated design procedure to determine the minimum mass column for a particular combination of design load and length. Numerical studies gave the mass characteristics of the truss column for broad ranges of load and length. Comparisons of the truss column with a baseline tubular column used a special structural efficiency parameter for this class of columns.

48 CFR 47.303-15 - F.o.b. designated air carrier's terminal, point of exportation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false F.o.b. designated air... Contracts 47.303-15 F.o.b. designated air carrier's terminal, point of exportation. (a) Explanation of delivery term. F.o.b. designated air carrier's terminal, point of exportation means free of expense to the...

48 CFR 47.303-16 - F.o.b. designated air carrier's terminal, point of importation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false F.o.b. designated air... Contracts 47.303-16 F.o.b. designated air carrier's terminal, point of importation. (a) Explanation of delivery term. F.o.b. designated air carrier's terminal, point of importation means free of expense to the...

47 CFR 73.699 - TV engineering charts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

47 CFR 73.699 - TV engineering charts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

47 CFR 73.699 - TV engineering charts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

47 CFR 73.699 - TV engineering charts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

47 CFR 73.699 - TV engineering charts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

Development of an improved overlay design procedure for Oregon : volume II, evaluation of procedure.

DOT National Transportation Integrated Search

1987-12-01

This report is the second in a three-volume series dealing with the development of an improved overlay design procedure for Oregon. This report presents the results of the second-year findings. Data from five projects were collected and analyzed usin...

Verification of the ODOT overlay design procedure : final report, June 1996.

DOT National Transportation Integrated Search

1996-06-01

The current ODOT overlay design procedure sometimes indicates additional pavement thickness is needed right after the overlay construction. Evaluation of the current procedure reveals that using spreadabiity to back calculate existing pavement modulu...

Control chart applications in healthcare: a literature review

NASA Astrophysics Data System (ADS)

Suman, Gaurav; Prajapati, DeoRaj

2018-05-01

The concept of Statistical process control (SPC) was given by the physicist Walter Shewhart in order to improve the industrial manufacturing. The SPC was firstly applied in laboratory and after then shifted to patient level in hospitals. As there is more involvement of human in healthcare, the chances of errors are also more. SPC i.e., control chart can help in determining the source of errors by identifying the special and common causes of variations. This paper presents the review of literature on the application of SPC and control chart in healthcare sector. Forty articles are selected out of 142 potentially relevant searched studies. Selected studies are categorised into eight departments. Literature survey shows that most of work on control chart applications in healthcare is carried out in Surgery, Emergency and Epidemiology departments. US, UK and Australia are the main customers where maximum amount of work was done. The US is the country where control chart in healthcare sector have been used at regular interval. This shows the gap of deploying control chart in different departments and different countries as well. The CUSUM and EWMA chart came into picture in healthcare sector after 2008 and are used at regular interval.

23 CFR 636.202 - When are two-phase design-build selection procedures appropriate?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false When are two-phase design-build selection procedures appropriate? 636.202 Section 636.202 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Selection Procedures, Award Criteria § 636.202 When are two-phase design-build...

46 CFR 160.077-7 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2010 CFR

2010-10-01

... being used in any production of PFDs. (b) Determinations of equivalence of design, construction, and... 46 Shipping 6 2010-10-01 2010-10-01 false Procedure for approval of design or material revision... Personal Flotation Devices § 160.077-7 Procedure for approval of design or material revision. (a) Each...

48 CFR 36.301 - Use of two-phase design-build selection procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Use of two-phase design-build selection procedures. 36.301 Section 36.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Two-Phase Design-Build Selection Procedures 36.301...

Do parents understand growth charts? A national, Internet-based survey.

PubMed

Ben-Joseph, Elana Pearl; Dowshen, Steven A; Izenberg, Neil

2009-10-01

The objective of this study was to assess parental knowledge and understanding of growth charts. An online survey was conducted with 1000 parents selected to be demographically representative of the US population. Questions explored awareness of, knowledge of, and attitudes toward growth monitoring, as well as the ability to interpret growth chart data. Seventy-nine percent of parents surveyed claimed to have seen a growth chart before, with the majority thinking that they understood it well. Sixty-four percent of parents thought it was important to be shown growth charts to see how their child was growing, and 40% expressed the need to see their child's growth chart as confirmation of their health care provider's verbal interpretation. However, when provided with multiple-choice questions and answers, only 64% could identify a child's weight when shown a plotted point on a growth chart. Ninety-six percent had heard of the term "percentile," but only 68% identified the percentile of the plotted point, and only 56% could identify the definition of percentile. Up to 77% interpreted incorrectly charts containing height/weight measurements in tandem. Although growth charts are used frequently as visual aids to educate parents about their children's growth, many parents cannot comprehend the data. This finding is significant because many parents prefer to be shown growth charts by their health care provider, and many parents report recording their children's measurements on growth charts at home.

Run charts revisited: a simulation study of run chart rules for detection of non-random variation in health care processes.

PubMed

Anhøj, Jacob; Olesen, Anne Vingaard

2014-01-01

A run chart is a line graph of a measure plotted over time with the median as a horizontal line. The main purpose of the run chart is to identify process improvement or degradation, which may be detected by statistical tests for non-random patterns in the data sequence. We studied the sensitivity to shifts and linear drifts in simulated processes using the shift, crossings and trend rules for detecting non-random variation in run charts. The shift and crossings rules are effective in detecting shifts and drifts in process centre over time while keeping the false signal rate constant around 5% and independent of the number of data points in the chart. The trend rule is virtually useless for detection of linear drift over time, the purpose it was intended for.

21 CFR 870.2810 - Paper chart recorder.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Paper chart recorder. 870.2810 Section 870.2810 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Monitoring Devices § 870.2810 Paper chart recorder...

21 CFR 870.2810 - Paper chart recorder.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Paper chart recorder. 870.2810 Section 870.2810 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Monitoring Devices § 870.2810 Paper chart recorder...

46 CFR 232.3 - Chart of accounts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... UNIFORM FINANCIAL REPORTING REQUIREMENTS § 232.3 Chart of accounts. (a) Purpose of accounts. A contractor shall use this chart of accounts as a guide for preparing the financial statements and for other required financial reports required to be submitted to the Maritime Administration. However, whenever there...

[Prospective comparison of the flow chart for laboratory investigations for anaemia from the Dutch College of General Practitioners' guideline 'Anaemia' with a self-developed, substantive and logistical alternative flow chart].

PubMed

Oosterhuis, W P; van der Horst, M; van Dongen, K; Ulenkate, H J L M; Volmer, M; Wulkan, R W

2007-10-20

To compare the flow diagram for the diagnosis of anaemia from the guideline 'Anaemia' from the Dutch College of General Practitioners (NHG) with a substantive and logistical alternative protocol. Prospective. For evaluation of anaemia, 124 patients from primary care reported to the laboratories of the St. Elisabeth Hospital in Tilburg (n = 94) and the Scheper Hospital in Emmen (n = 30), the Netherlands. Two flow charts were used: the NHG's flow chart and a self-developed chart in which not mean corpuscular volume, but ferritin concentration occupies the central position. All the laboratory tests mentioned in both flow charts were carried out in every patient with, for practical reasons, the exception of Hgb electrophoresis and bone marrow investigations. General practitioners were approached and patient dossiers were consulted to obtain further clinical data. According to the NHG protocol, on the grounds of the laboratory investigations, 64 (52%) of patients could not be put in a specific category. The majority were patients with normocytary anaemia who did not fulfil the criteria for iron deficiency anaemia or the anaemia of chronic disease. According to the alternative chart, in 36 (29%) patients no diagnosis was made. These were patients in whom no abnormal laboratory findings were observed, other than low haemoglobin values. The majority of the patients had normocytary anaemia, in some cases this was interpreted as the anaemia of chronic disease, but more often the anaemia could not be assigned to a particular category. A large number ofpatients had a raised creatinine value. This value did not appear in the NHG protocol. In 15% of patients, more than one cause for anaemia was found. The NHG protocol did not enable these multiple diagnoses to be made. Accordingly, the NHG protocol was difficult to implement in the laboratory. Using the NHG flow diagram a large percentage of patients could not be assigned to a particular category. Using the alternative flow

Growth Charts for Children With Down Syndrome in the United States.

PubMed

Zemel, Babette S; Pipan, Mary; Stallings, Virginia A; Hall, Waynitra; Schadt, Kim; Freedman, David S; Thorpe, Phoebe

2015-11-01

Children with Down syndrome (DS) have lower birth weights and grow more slowly than children without DS. Advances in and increased access to medical care have improved the health and well-being of individuals with DS; however, it is unknown whether their growth has also improved. Our objective was to develop new growth charts for children with DS and compare them to older charts from the United States and more contemporary charts from the United Kingdom. The Down Syndrome Growing Up Study (DSGS) enrolled a convenience sample of children with DS up to 20 years of age and followed them longitudinally. Growth parameters were measured by research anthropometrists. Sex-specific growth charts were generated for the age ranges birth to 36 months and 2 to 20 years using the LMS method. Weight-for-length and BMI charts were also generated. Comparisons with other curves were presented graphically. New DSGS growth charts were developed by using 1520 measurements on 637 participants. DSGS growth charts for children <36 months of age showed marked improvements in weight compared with older US charts. DSGS charts for 2- to 20-year-olds showed that contemporary males are taller than previous charts showed. Generally, the DSGS growth charts are similar to the UK charts. The DSGS growth charts can be used as screening tools to assess growth and nutritional status and to provide indications of how growth of an individual child compares with peers of the same age and sex with DS. Copyright © 2015 by the American Academy of Pediatrics.

Growth Charts for Children With Down Syndrome in the United States

PubMed Central

Zemel, Babette S.; Pipan, Mary; Stallings, Virginia A.; Hall, Waynitra; Schadt, Kim; Freedman, David S.; Thorpe, Phoebe

2017-01-01

BACKGROUND AND OBJECTIVES Children with Down syndrome (DS) have lower birth weights and grow more slowly than children without DS. Advances in and increased access to medical care have improved the health and well-being of individuals with DS; however, it is unknown whether their growth has also improved. Our objective was to develop new growth charts for children with DS and compare them to older charts from the United States and more contemporary charts from the United Kingdom. METHODS The Down Syndrome Growing Up Study (DSGS) enrolled a convenience sample of children with DS up to 20 years of age and followed them longitudinally. Growth parameters were measured by research anthropometrists. Sex-specific growth charts were generated for the age ranges birth to 36 months and 2 to 20 years using the LMS method. Weight-for-length and BMI charts were also generated. Comparisons with other curves were presented graphically. RESULTS New DSGS growth charts were developed by using 1520 measurements on 637 participants. DSGS growth charts for children <36 months of age showed marked improvements in weight compared with older US charts. DSGS charts for 2- to 20-year-olds showed that contemporary males are taller than previous charts showed. Generally, the DSGS growth charts are similar to the UK charts. CONCLUSIONS The DSGS growth charts can be used as screening tools to assess growth and nutritional status and to provide indications of how growth of an individual child compares with peers of the same age and sex with DS. PMID:26504127

46 CFR 160.176-6 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Procedure for approval of design or material revision... Lifejackets § 160.176-6 Procedure for approval of design or material revision. (a) Each change in design, material, or construction must be approved by the Commandant before being used in lifejacket production. (b...

Study on the quality of FRP fishing vessel based on improved Fishbone Chart

NASA Astrophysics Data System (ADS)

Sui, J. H.; Yu, Y. F.; Du, Q. F.; Jiang, D. W.

2018-01-01

The construction quality of FRP fishing vessels influences their production, use and industry development. In order to explore the factors that affect the construction quality of FRP fishing vessels, key factors affecting the construction quality of FRP fishing vessels are determined based on the quality problems of FRP fishing vessels constructed. The improved Fishbone Chart is used to analyze the eight factors of “human, machine, material, process, environment, inspection, design and information”. Taking the factors that affect the construction quality of FRP fishing vessels as the central target, the eight influencing factors were condensed into five aspects and a composite Fishbone Chart is drawn. The Fishbone Chart is used as the basic model, the influencing factors are sorted, screened and discriminated, and the system model convenient for construction site management and control is established. Finally, the causes of poor construction of FRP fishing vessels are analyzed and discussed, and relevant suggestions are put forward.

40 CFR 240.201-2 - Recommended procedures: Design.

Code of Federal Regulations, 2011 CFR

2011-07-01

....201-2 Section 240.201-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... or excluded wastes inadvertently left at the facility should be considered in design. (b) Examples of...

40 CFR 240.201-2 - Recommended procedures: Design.

Code of Federal Regulations, 2010 CFR

2010-07-01

... carcasses, automobile bodies, dewatered sludges from water treatment plants, and industrial process wastes. ... WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... or excluded wastes inadvertently left at the facility should be considered in design. (b) Examples of...

Surgical management of Dupuytren's contracture in Europe: regional analysis of a surgeon survey and patient chart review.

PubMed

Dias, J; Bainbridge, C; Leclercq, C; Gerber, R A; Guerin, D; Cappelleri, J C; Szczypa, P P; Dahlin, L B

2013-03-01

We explored regional variations in the surgical management of patients with Dupuytren's contracture (DC) in 12 European countries using a surgeon survey and patient chart review. Twelve countries participated: Denmark, Finland, Sweden (Nordic region); Czech Republic, Hungary, Poland (East); France, Germany, the Netherlands, UK (West); Italy, Spain (Mediterranean). For the survey, a random sample of orthopaedic/plastic surgeons (n = 687) with 3-30 years' experience was asked about DC procedures performed during the previous 12 months. For the chart review (n = 3357), information from up to five consecutive patients was extracted. Descriptive statistics are reported. Ninety-five per cent of all surgeons used fasciectomy for DC, followed by fasciotomy (70%), dermofasciectomy (38%) and percutaneous needle fasciotomy (35%). Most surgeons were satisfied with fasciectomy over other procedures. Recommended time away from work and duration of physical therapy increased with the invasiveness of the procedure. The intra-operative complication rate was 4.0%; the postoperative complication rate was 34%. Overall, ≥ 97% of the procedures were rated by surgeons as having a positive outcome. Across all regions, 54% of patients had no nodules or contracture after the procedures. Only 2% of patients required retreatment within the first year of surgery. Important inter- and intraregional differences in these aspects of patient management are described. Understanding current regional treatment patterns and their relationships to country-specific health systems may facilitate earlier identification of, and intervention for, DD and help to optimise the overall treatment for patients with this chronic condition. © 2013 Blackwell Publishing Ltd.

Three-in-one weight, height and body mass index charts for children and adults.

PubMed

Elizabeth, K E; Muraleedharan, Manu

2003-08-01

The aim of the study was to develop four appropriate three-in-one weight, height and built in body mass index (BMI) charts, for under-fives, 0-5-year-olds, > 5-10-year-olds, > 10-18-year-olds, and adults and to delineate the normal range, underweight, overweight and obesity on the above charts. Four different charts were designed for the various age groups as indicated above. Height was made available on the x-axis, weight on the y-axis, and corresponding BMI values on the right margin. Shading of the normal range to denote the health path and marking of the cut-off curves to denote normal status, overweight, and obesity were done selecting appropriate round figures to suit both sexes in accordance with the International Obesity Task Force (IOTF) recommendations for the various age groups. Field trials were done on appropriate subjects belonging to various age groups. 500 in each group with equal male to female ratio. The field trials showed that all the studied subjects belonging to both sexes came within the purview of the chart and those with normal nutritional status, underweight, overweight, and obesity could easily be identified looking at the chart without doing any further calculation. Early intervention also could be advised as the chart could demonstrate how much weight should be gained or reduced to come within the health path. In conclusion, the charts are applicable to both sexes and are user friendly. These are appropriate for general screening of nutritional status and to determine underweight, overweight, and obesity from birth to adulthood. They give a visual display of the ideal health path with respect to weight, height, and BMI and the adjustment in weight required to reach the normal range.

Optical design of f-theta lens for dual wavelength selective laser melting

NASA Astrophysics Data System (ADS)

Feng, Lianhua; Cao, Hongzhong; Zhang, Ning; Xu, Xiping; Duan, Xuanming

2016-10-01

F-theta lens is an important unit for selective laser melting (SLM) manufacture. The dual wavelength f-theta lens has not been used in SLM manufacture. Here, we present the design of the f-theta lens which satisfies SLM manufacture with coaxial 532 nm and 1030 nm 1080 nm laser beams. It is composed of three pieces of spherical lenses. The focal spots for 532 nm laser and 1030 nm 1080 nm laser are smaller than 35 μm and 70 μm, respectively. The results meet the demands of high precision SLM. The chromatic aberration could cause separation between two laser focal spots in the scanning plane, so chromatic aberration correction is very important to our design. The lateral color of the designed f-theta lens is less than 11 μm within the scan area of 150 mm x 150 mm, which meet the application requirements of dual wavelength selective laser melting.

46 CFR 232.3 - Chart of accounts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... stated in any revision to generally accepted accounting principles, the meaning of the latter shall... UNIFORM FINANCIAL REPORTING REQUIREMENTS § 232.3 Chart of accounts. (a) Purpose of accounts. A contractor shall use this chart of accounts as a guide for preparing the financial statements and for other...

21 CFR 886.1150 - Visual acuity chart.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Visual acuity chart. 886.1150 Section 886.1150 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1150 Visual acuity chart. (a) Identification...

[Growth charts: Impact on the prevalence of nutritional disorders].

PubMed

Polo Martín, P; Abellan, J J; Nájar Godoy, M I; Álvarez de Laviada Mulero, T

2015-05-01

The references used to assess child growth in Spain are the graphs of the Orbegozo Foundation and the charts of the World Health Organization (WHO). The objective of this study is to analyze the differences between the two charts for weight, height and body mass index, and assess their relevance to identify growth or nutritional problems. The values of the extreme percentiles of height, weight and body mass index for each sex from 0 to 10 years in both charts are compared. For each value Absolute differences and Z scores are calculated for each value. To evaluate the impact on the prevalence of the various nutritional or growth disorders the location of the value of the respective percentiles of in each of the charts were assessed. Significant differences were observed between the 3th percentile of height and weight, 97th of weight, and 85th and 97th of body mass index. Marked differences were observed for the extreme values of body mass index. During the first years, the Orbegozo charts overestimate the prevalence of malnutrition (between 2% and 19% depending on age and sex) compared to the WHO charts. In subsequent ages Orbegozo underestimates WHO between 0.7% and 2.89%. Orbegozo underestimates the prevalence of overweight (between 2.5% and 14.8%) compared to the WHO charts. The 97th percentile of Body mass index in the Orbegozo charts corresponds in most cases with WHO percentiles above 99.99%. The two charts analyzed have significant differences from a clinical and the public health point of view, in the estimation of overweight/obesity and malnutrition. Copyright © 2014 Asociación Española de Pediatría. Published by Elsevier España, S.L.U. All rights reserved.

The Use of Flow Charts in Sediment Routing Analysis

Treesearch

Leslie M. Reid

1982-01-01

Flow charts are a widely used means of diagramming relationships among transport processes and storage sites during analyses of sediment routing. Because they have taken so many different forms, however, it is very difficult to use published flow charts to compare geomorphic systems. Though they generally are constructed to achieve the same purpose, flow charts...

Adherence to the Australian National Inpatient Medication Chart: the efficacy of a uniform national drug chart on improving prescription error.

PubMed

Atik, Alp

2013-10-01

In 2006, the National Inpatient Medication Chart (NIMC) was introduced as a uniform medication chart in Australian public hospitals with the aim of reducing prescription error. The rate of regular medication prescription error in the NIMC was assessed. Data was collected using the NIMC Audit Tool and analyzed with respect to causes of error per medication prescription and per medication chart. The following prescription requirements were assessed: date, generic drug name, route of administration, dose, frequency, administration time, indication, signature, name and contact details. A total of 1877 medication prescriptions were reviewed. 1653 prescriptions (88.07%) had no contact number, 1630 (86.84%) did not have an indication, 1230 and 675 (35.96%) used a drug's trade name. Within 261 medication charts, all had at least one entry, which did not include an indication, 258 (98.85%) had at least one entry, which did not have a contact number and 200 (76.63%) had at least one entry, which used a trade name. The introduction of a uniform national medication chart is a positive step, but more needs to be done to address the root causes of prescription error. © 2012 John Wiley & Sons Ltd.

33 CFR 164.33 - Charts and publications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Charts and publications. 164.33...) PORTS AND WATERWAYS SAFETY NAVIGATION SAFETY REGULATIONS § 164.33 Charts and publications. (a) Each... extract from, each of the following publications: (i) U.S. Coast Pilot. (ii) Coast Guard Light List. (3...

Project on Teaching Charts and Graphs to ABE Students. Part I: Teacher's Guide [and] Part II: Transparency Assembly Package.

ERIC Educational Resources Information Center

Renton Vocational Inst., WA.

The teacher's guide and collection of transparency masters are designed for use in teaching adult basic education (ABE) students how to read and interpret graphs and charts. Covered in the individual lessons of the instructional unit are the reading and interpretation of charts as well as picture, line, bar, and circle graphs. Each unit contains a…

Validating abortion procedure coding in Canadian administrative databases.

PubMed

Samiedaluie, Saied; Peterson, Sandra; Brant, Rollin; Kaczorowski, Janusz; Norman, Wendy V

2016-07-12

The British Columbia (BC) Ministry of Health collects abortion procedure data in the Medical Services Plan (MSP) physician billings database and in the hospital information Discharge Abstracts Database (DAD). Our study seeks to validate abortion procedure coding in these databases. Two randomized controlled trials enrolled a cohort of 1031 women undergoing abortion. The researcher collected database includes both enrollment and follow up chart review data. The study cohort was linked to MSP and DAD data to identify all abortions events captured in the administrative databases. We compared clinical chart data on abortion procedures with health administrative data. We considered a match to occur if an abortion related code was found in administrative data within 30 days of the date of the same event documented in a clinical chart. Among 1158 abortion events performed during enrollment and follow-up period, 99.1 % were found in at least one of the administrative data sources. The sensitivities for the two databases, evaluated using a gold standard, were 97.7 % (95 % confidence interval (CI): 96.6-98.5) for the MSP database and 91.9 % (95 % CI: 90.0-93.4) for the DAD. Abortion events coded in the BC health administrative databases are highly accurate. Single-payer health administrative databases at the provincial level in Canada have the potential to offer valid data reflecting abortion events. ClinicalTrials.gov Identifier NCT01174225 , Current Controlled Trials ISRCTN19506752 .

Procedures for the GMP-Compliant Production and Quality Control of [18F]PSMA-1007: A Next Generation Radiofluorinated Tracer for the Detection of Prostate Cancer

PubMed Central

Cardinale, Jens; Martin, René; Remde, Yvonne; Schäfer, Martin; Hienzsch, Antje; Hübner, Sandra; Zerges, Anna-Maria; Marx, Heike; Hesse, Ronny; Weber, Klaus; Smits, Rene; Hoepping, Alexander; Müller, Marco; Neels, Oliver C.; Kopka, Klaus

2017-01-01

Radiolabeled tracers targeting the prostate-specific membrane antigen (PSMA) have become important radiopharmaceuticals for the PET-imaging of prostate cancer. In this connection, we recently developed the fluorine-18-labelled PSMA-ligand [18F]PSMA-1007 as the next generation radiofluorinated Glu-ureido PSMA inhibitor after [18F]DCFPyL and [18F]DCFBC. Since radiosynthesis so far has been suffering from rather poor yields, novel procedures for the automated radiosyntheses of [18F]PSMA-1007 have been developed. We herein report on both the two-step and the novel one-step procedures, which have been performed on different commonly-used radiosynthesisers. Using the novel one-step procedure, the [18F]PSMA-1007 was produced in good radiochemical yields ranging from 25 to 80% and synthesis times of less than 55 min. Furthermore, upscaling to product activities up to 50 GBq per batch was successfully conducted. All batches passed quality control according to European Pharmacopoeia standards. Therefore, we were able to disclose a new, simple and, at the same time, high yielding production pathway for the next generation PSMA radioligand [18F]PSMA-1007. Actually, it turned out that the radiosynthesis is as easily realised as the well-known [18F]FDG synthesis and, thus, transferable to all currently-available radiosynthesisers. Using the new procedures, the clinical daily routine can be sustainably supported in-house even in larger hospitals by a single production batch. PMID:28953234

46 CFR 154.610 - Design temperature not colder than 0 °C (32 °F).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Design temperature not colder than 0 °C (32 °F). 154..., Construction and Equipment Materials § 154.610 Design temperature not colder than 0 °C (32 °F). Materials for cargo tanks for a design temperature not colder than 0 °C (32 °F) must meet the following: (a) The tank...

Lunar and planetary maps and charts available for public sale

NASA Technical Reports Server (NTRS)

1973-01-01

A catalog of lunar and planetary charts which are available from the U.S. Government Printing Office is presented. The charts are identified by the area of the lunar topology involved and the prices of each chart are shown.

Development of an Overlay Design Procedure for Composite Pavements

DOT National Transportation Integrated Search

2017-09-01

The composite overlay design procedure currently used by ODOT sometimes produces very large overlay thicknesses that are deemed structurally unnecessary, especially for composite pavements already with thick asphalt overlays. This study was initiated...

Optimal experimental designs for fMRI when the model matrix is uncertain.

PubMed

Kao, Ming-Hung; Zhou, Lin

2017-07-15

This study concerns optimal designs for functional magnetic resonance imaging (fMRI) experiments when the model matrix of the statistical model depends on both the selected stimulus sequence (fMRI design), and the subject's uncertain feedback (e.g. answer) to each mental stimulus (e.g. question) presented to her/him. While practically important, this design issue is challenging. This mainly is because that the information matrix cannot be fully determined at the design stage, making it difficult to evaluate the quality of the selected designs. To tackle this challenging issue, we propose an easy-to-use optimality criterion for evaluating the quality of designs, and an efficient approach for obtaining designs optimizing this criterion. Compared with a previously proposed method, our approach requires a much less computing time to achieve designs with high statistical efficiencies. Copyright © 2017 Elsevier Inc. All rights reserved.

Statistical process control charts for monitoring military injuries.

PubMed

Schuh, Anna; Canham-Chervak, Michelle; Jones, Bruce H

2017-12-01

An essential aspect of an injury prevention process is surveillance, which quantifies and documents injury rates in populations of interest and enables monitoring of injury frequencies, rates and trends. To drive progress towards injury reduction goals, additional tools are needed. Statistical process control charts, a methodology that has not been previously applied to Army injury monitoring, capitalise on existing medical surveillance data to provide information to leadership about injury trends necessary for prevention planning and evaluation. Statistical process control Shewhart u-charts were created for 49 US Army installations using quarterly injury medical encounter rates, 2007-2015, for active duty soldiers obtained from the Defense Medical Surveillance System. Injuries were defined according to established military injury surveillance recommendations. Charts display control limits three standard deviations (SDs) above and below an installation-specific historical average rate determined using 28 data points, 2007-2013. Charts are available in Army strategic management dashboards. From 2007 to 2015, Army injury rates ranged from 1254 to 1494 unique injuries per 1000 person-years. Installation injury rates ranged from 610 to 2312 injuries per 1000 person-years. Control charts identified four installations with injury rates exceeding the upper control limits at least once during 2014-2015, rates at three installations exceeded the lower control limit at least once and 42 installations had rates that fluctuated around the historical mean. Control charts can be used to drive progress towards injury reduction goals by indicating statistically significant increases and decreases in injury rates. Future applications to military subpopulations, other health outcome metrics and chart enhancements are suggested. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Nursing diagnosis taxonomy across the Atlantic Ocean: congruence between nurses' charting and the NANDA taxonomy.

PubMed

Thoroddsen, Asta; Thorsteinsson, Hrund Sch

2002-02-01

The purpose of this study was to analyse expressions or terms used by nurses in Iceland to describe patient problems. The classification of NANDA was used as reference. The research questions were: (a) Does NANDA terminology represent patient problems documented by Icelandic nurses? (b) If so, what kind of nursing diagnoses does it represent? (c) What kind of patient problems are not represented by NANDA terminology? (d) What are the most frequent nursing diagnoses used? A retrospective chart review was conducted in a 400 bed acute care hospital in Iceland. The sample was defined as nursing diagnosis statements in charts of patients hospitalized in two 6-month periods in two separate years. The data were analysed according to a predefined grading system based on the PES format or Problem -- (A)aetiology -- Signs and symptoms. A total of 1217 charts were used for the study, which yielded 2171 nursing diagnoses statements for analysis. Charts with at least one nursing diagnosis documented were 60.1% and the number of diagnoses per patient ranged from 0 to 10, with 65% of charts with three diagnoses or less. The number of diagnoses correlated with patients' length of stay, but not with increased age of the patients. The average number of statements per patient was 3.28. Almost 60% of the diagnoses were according to NANDA terminology, another 20% were stated as procedures, medical diagnoses or risks for complications. The 20 most frequently used nursing diagnoses accounted for 80% of all diagnoses documented. Discrepancy between nurses' documentation on emotional problems and availability of diagnosis in the NANDA taxonomy was evident. It can be concluded that the NANDA taxonomy seems to be culturally relevant for nurses in different cultures.

32 CFR Appendix F to Part 197 - Procedures for Copying of Documents for the Foreign Relations of the United States Series

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 2 2014-07-01 2014-07-01 false Procedures for Copying of Documents for the Foreign Relations of the United States Series F Appendix F to Part 197 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS HISTORICAL RESEARCH IN...

32 CFR Appendix F to Part 197 - Procedures for Copying of Documents for the Foreign Relations of the United States Series

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 2 2013-07-01 2013-07-01 false Procedures for Copying of Documents for the Foreign Relations of the United States Series F Appendix F to Part 197 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS HISTORICAL RESEARCH IN...

32 CFR Appendix F to Part 197 - Procedures for Copying of Documents for the Foreign Relations of the United States Series

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 2 2012-07-01 2012-07-01 false Procedures for Copying of Documents for the Foreign Relations of the United States Series F Appendix F to Part 197 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS HISTORICAL RESEARCH IN...

Chesapeake Highway Advisories Routing Traffic, Chart, Business Plan

DOT National Transportation Integrated Search

1996-10-01

THE BUSINESS PLAN IS ORGANIZED INTO FOUR MAJOR SECTIONS. THE FIRST SECTION IS INTRODUCTORY IN NATURE AND PROVIDES BACKGROUND INFORMATION ON ITS AND THE CHART PROGRAM IN MARYLAND. IT INCLUDES THE CHART MISSION, GOALS AND OBJECTIVES, AS WELL AS OVERVIE...

User compliance with documenting on a track and trigger-based observation and response chart: a two-phase multi-site audit study.

PubMed

Elliott, Doug; Allen, Emily; McKinley, Sharon; Perry, Lin; Duffield, Christine; Fry, Margaret; Gallagher, Robyn; Iedema, Rick; Roche, Michael

2017-12-01

To examine user compliance and completeness of documentation with a newly designed observation and response chart and whether a rapid response system call was triggered when clinically indicated. Timely recognition and responses to patient deterioration in hospital general wards remain a challenge for healthcare systems globally. Evaluating practice initiatives to improve recognition and response are required. Two-phase audit. Following introduction of the charts in ten health service sites in Australia, an audit of chart completion was conducted during a short trial for initial usability (Phase 1; 2011). After chart adoption as routine use in practice, retrospective and prospective chart audits were conducted (Phase 2; 2012). Overall, 818 and 1,058 charts were audited during the two phases respectively. Compliance was mixed but improved with the new chart (4%-14%). Contrary to chart guidelines, numbers rather than dots were written in the graphing section in 60% of cases. Rates of recognition of abnormal vital signs improved slightly with new charts in use, particularly for higher levels of surveillance and clinical review. Based on local calling criteria, an emergency call was initiated in 33% of cases during the retrospective audit and in 41% of cases with the new chart. User compliance was less than optimal, limiting full function of the chart sections and compliance with local calling criteria. Overcoming apparent behavioural and work culture barriers may improve chart completion, aiding identification of abnormal vital signs and triggering a rapid response system activation when clinical deterioration is detected. © 2017 The Authors. Journal of Advanced Nursing Published by John Wiley & Sons Ltd.

Quad Charts in the Classroom to Reinforce Technical Communication Fundamentals

ERIC Educational Resources Information Center

Ford, Julie Dyke; Wei, Tie

2015-01-01

Quad charts are a genre frequently used in scientific and technical environments, yet little prior work has evaluated their potential for reinforcing technical communication fundamentals. This article provides background information about quad charts and notes the benefits of implementing quad charts in the classroom. In particular, introducing…

Development of dental charts according to tooth development and eruption for Turkish children and young adults

PubMed Central

Afşin, Hüseyin; Ozaslan, Abdi; Karadayı, Şükriye

2014-01-01

Purpose In this study, we aimed to develop dental charts for Turkish children and young adults of both genders within the age group of 4.5-22.5 years according to tooth mineralization and eruption in a format similar to that proposed by AlQahtani et al. Materials and Methods In total, 753 digital panoramic radiographs from 350 males and 403 females were assessed. The permanent teeth were evaluated according to the classification system described by Demirjian et al. The eruption stage was assessed with Bengston's system, which was modified by AlQahtani et al at four points. Results Teeth generally developed earlier in females than in males. This was particularly notable in the age group of 5-14 years. However, this difference was usually visible in only one stage, not in all teeth. It has been determined that the mixed dentition period ended with the shedding of the second deciduous molars in both genders. Conclusion The dental charts presented here included information that could be beneficial to dental clinicians in making appropriate diagnosis and planning orthodontic and surgical procedures. These charts also provided datasets for preliminary dental age estimation in Turkish children and young adults. PMID:24944959

47 CFR 73.599 - NCE-FM engineering charts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false NCE-FM engineering charts. 73.599 Section 73.599 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Noncommercial Educational FM Broadcast Stations § 73.599 NCE-FM engineering charts. This...

47 CFR 73.599 - NCE-FM engineering charts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false NCE-FM engineering charts. 73.599 Section 73.599 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Noncommercial Educational FM Broadcast Stations § 73.599 NCE-FM engineering charts. This...

47 CFR 73.599 - NCE-FM engineering charts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false NCE-FM engineering charts. 73.599 Section 73.599 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Noncommercial Educational FM Broadcast Stations § 73.599 NCE-FM engineering charts. This...

47 CFR 73.599 - NCE-FM engineering charts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false NCE-FM engineering charts. 73.599 Section 73.599 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Noncommercial Educational FM Broadcast Stations § 73.599 NCE-FM engineering charts. This...

47 CFR 73.599 - NCE-FM engineering charts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false NCE-FM engineering charts. 73.599 Section 73.599 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Noncommercial Educational FM Broadcast Stations § 73.599 NCE-FM engineering charts. This...

Characterizing the Experimental Procedure in Science Laboratories: A preliminary step towards students experimental design

NASA Astrophysics Data System (ADS)

Girault, Isabelle; d'Ham, Cedric; Ney, Muriel; Sanchez, Eric; Wajeman, Claire

2012-04-01

Many studies have stressed students' lack of understanding of experiments in laboratories. Some researchers suggest that if students design all or parts of entire experiment, as part of an inquiry-based approach, it would overcome certain difficulties. It requires that a procedure be written for experimental design. The aim of this paper is to describe the characteristics of a procedure in science laboratories, in an educational context. As a starting point, this paper proposes a model in the form of a hierarchical task diagram that gives the general structure of any procedure. This model allows both the analysis of existing procedures and the design of a new inquiry-based approach. The obtained characteristics are further organized into criteria that can help both teachers and students assess a procedure during and after its writing. These results are obtained through two different sets of data. First, the characteristics of procedures are established by analysing laboratory manuals. This allows the organization and type of information in procedures to be defined. This analysis reveals that students are seldom asked to write a full procedure, but sometimes have to specify tasks within a procedure. Secondly, iterative interviews are undertaken with teachers. This leads to the list of criteria to evaluate the procedure.

SYSTEMATIC PROCEDURE FOR DESIGNING PROCESSES WITH MULTIPLE ENVIRONMENTAL OBJECTIVES

EPA Science Inventory

Evaluation of multiple objectives is very important in designing environmentally benign processes. It requires a systematic procedure for solving multiobjective decision-making problems, due to the complex nature of the problems, the need for complex assessments, and complicated ...

46 CFR 160.176-6 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design or material revision. 160.176-6 Section 160.176-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-6 Procedure for approval of design...

46 CFR 160.176-6 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 6 2011-10-01 2011-10-01 false Procedure for approval of design or material revision. 160.176-6 Section 160.176-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-6 Procedure for approval of design...

46 CFR 160.176-6 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design or material revision. 160.176-6 Section 160.176-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-6 Procedure for approval of design...

Multivariable control altitude demonstration on the F100 turbofan engine

NASA Technical Reports Server (NTRS)

Lehtinen, B.; Dehoff, R. L.; Hackney, R. D.

1979-01-01

The F100 Multivariable control synthesis (MVCS) program, was aimed at demonstrating the benefits of LGR synthesis theory in the design of a multivariable engine control system for operation throughout the flight envelope. The advantages of such procedures include: (1) enhanced performance from cross-coupled controls, (2) maximum use of engine variable geometry, and (3) a systematic design procedure that can be applied efficiently to new engine systems. The control system designed, under the MVCS program, for the Pratt & Whitney F100 turbofan engine is described. Basic components of the control include: (1) a reference value generator for deriving a desired equilibrium state and an approximate control vector, (2) a transition model to produce compatible reference point trajectories during gross transients, (3) gain schedules for producing feedback terms appropriate to the flight condition, and (4) integral switching logic to produce acceptable steady-state performance without engine operating limit exceedance.

How to Read an LLNL Energy Flow Chart (Sankey Diagram)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, A. J.

Each year, the Lawrence Livermore National Laboratory releases energy flow charts that illustrate the nation's consumption and use of energy. A.J. Simon, group leader for LLNL’s energy program, breaks the 2015 chart down in this video, describing how to read the chart and what year-to-year trends he sees.

Charting Ingredients for Life

NASA Image and Video Library

2005-07-27

This graph, or spectrum, from NASA Spitzer Space Telescope, charts light from a faraway galaxy located 10 billion light years from Earth. It tracks mid-infrared light from an extremely luminous galaxy when the universe was only 1/4 of its current age.

Proposed design procedure for transmission shafting under fatigue loading

NASA Technical Reports Server (NTRS)

Loewenthal, S. H.

1978-01-01

The B106 American National Standards Committee is currently preparing a new standard for the design of transmission shafting. A design procedure, proposed for use in the new standard, for computing the diameter of rotating solid steel shafts under combined cyclic bending and steady torsion is presented. The formula is based on an elliptical variation of endurance strength with torque exhibited by combined stress fatigue data. Fatigue factors are cited to correct specimen bending endurance strength data for use in the shaft formula. A design example illustrates how the method is to be applied.

46 CFR 154.620 - Design temperature below −55 °C (−67 °F) and down to −165 °C (−265 °F).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Design temperature below â55 °C (â67 °F) and down to... LIQUEFIED GASES Design, Construction and Equipment Materials § 154.620 Design temperature below −55 °C (−67... design temperature below −55 °C (−67 °F) and down to −165 °C (−265 °F) must: (a) Meet § 54.25-10(b)(2...

46 CFR 154.620 - Design temperature below −55 °C (−67 °F) and down to −165 °C (−265 °F).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Design temperature below â55 °C (â67 °F) and down to... LIQUEFIED GASES Design, Construction and Equipment Materials § 154.620 Design temperature below −55 °C (−67... design temperature below −55 °C (−67 °F) and down to −165 °C (−265 °F) must: (a) Meet § 54.25-10(b)(2...

46 CFR 169.809 - Charts and nautical publications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Charts and nautical publications. 169.809 Section 169.809 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Operations § 169.809 Charts and nautical publications. As appropriate for the intended voyage, all...

Science and self-assessment: phrenological charts 1840-1940.

PubMed

Sysling, Fenneke

2018-06-01

This paper looks at phrenological charts as mediators of (pseudo-)scientific knowledge to individual clients who used them as a means of self-assessment. Phrenologists propagated the idea that the human mind could be categorized into different mental faculties, with each particular faculty represented in a different area of the brain and by bumps on the head. In the US and the UK popular phrenologists examined individual clients for a fee. Drawing on a collection of phrenological charts completed for individual clients, this paper shows how charts aspired to convey new ideals of selfhood by using the authority of science in tailor-made certificates, and by teaching clients some of the basic practices of that science. Hitherto historians studying phrenology have focused mainly on the attraction of the content of phrenological knowledge for the wider public, but in this paper I show how the charts enabled clients to participate actively in creating knowledge of their own bodies and selves.

23 CFR 636.208 - May I use my existing prequalification procedures with design-build contracts?

Code of Federal Regulations, 2010 CFR

2010-04-01

... design-build contracts? 636.208 Section 636.208 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Selection Procedures, Award Criteria... use your existing prequalification procedures for either construction or engineering design firms as a...

Removal design report for the 108-F Biological Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-09-01

Most of the 100-F facilities were deactivated with the reactor and have since been demolished. Of the dozen or so reactor-related structures, only the 105-F Reactor Building and the 108-F Biology Laboratory remain standing today. The 108-F Biology Laboratory was intended to be used as a facility for the mixing and addition of chemicals used in the treatment of the reactor cooling water. Shortly after F Reactor began operation, it was determined that the facility was not needed for this purpose. In 1949, the building was converted for use as a biological laboratory. In 1962, the lab was expanded bymore » adding a three-story annex to the original four-story structure. The resulting lab had a floor area of approximately 2,883 m{sup 2} (main building and annex) that operated until 1973. The building contained 47 laboratories, a number of small offices, a conference room, administrative section, lunch and locker rooms, and a heavily shielded, high-energy exposure cell. The purpose of this removal design report is to establish the methods of decontamination and decommissioning and the supporting functions associated with facility removal and disposal.« less

Visual mining geo-related data using pixel bar charts

NASA Astrophysics Data System (ADS)

Hao, Ming C.; Keim, Daniel A.; Dayal, Umeshwar; Wright, Peter; Schneidewind, Joern

2005-03-01

A common approach to analyze geo-related data is using bar charts or x-y plots. They are intuitive and easy to use. But important information often gets lost. In this paper, we introduce a new interactive visualization technique called Geo Pixel Bar Charts, which combines the advantages of Pixel Bar Charts and interactive maps. This technique allows analysts to visualize large amounts of spatial data without aggregation and shows the geographical regions corresponding to the spatial data attribute at the same time. In this paper, we apply Geo Pixel Bar Charts to visually mining sales transactions and Internet usage from different locations. Our experimental results show the effectiveness of this technique for providing data distribution and exceptions from the map.

Design and Properties Prediction of AMCO3F by First-Principles Calculations.

PubMed

Tian, Meng; Gao, Yurui; Ouyang, Chuying; Wang, Zhaoxiang; Chen, Liquan

2017-04-19

Computer simulation accelerates the rate of identification and application of new materials. To search for new materials to meet the increasing demands of secondary batteries with higher energy density, the properties of some transition-metal fluorocarbonates ([CO 3 F] 3- ) were simulated in this work as cathode materials for Li- and Na-ion batteries based on first-principles calculations. These materials were designed by substituting the K + ions in KCuCO 3 F with Li + or Na + ions and the Cu 2+ ions with transition-metal ions such as Fe 2+ , Co 2+ , Ni 2+ , and Mn 2+ ions, respectively. The phase stability, electronic conductivity, ionic diffusion, and electrochemical potential of these materials were calculated by first-principles calculations. After taking comprehensive consideration of the kinetic and thermodynamic properties, LiCoCO 3 F and LiFeCO 3 F are believed to be promising novel cathode materials in all of the calculated AMCO 3 F (A = Li and Na; M = Fe, Mn, Co, and Ni). These results will help the design and discovery of new materials for secondary batteries.

How to Read an LLNL Energy Flow Chart (Sankey Diagram)

ScienceCinema

Simon, A. J.

2018-01-16

Each year, the Lawrence Livermore National Laboratory releases energy flow charts that illustrate the nation's consumption and use of energy. A.J. Simon, group leader for LLNL’s energy program, breaks the 2015 chart down in this video, describing how to read the chart and what year-to-year trends he sees.

49 CFR 192.111 - Design factor (F) for steel pipe.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Design factor (F) for steel pipe. 192.111 Section...) for steel pipe. (a) Except as otherwise provided in paragraphs (b), (c), and (d) of this section, the... less must be used in the design formula in § 192.105 for steel pipe in Class 1 locations that: (1...

49 CFR 192.111 - Design factor (F) for steel pipe.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Design factor (F) for steel pipe. 192.111 Section...) for steel pipe. (a) Except as otherwise provided in paragraphs (b), (c), and (d) of this section, the... less must be used in the design formula in § 192.105 for steel pipe in Class 1 locations that: (1...

49 CFR 192.111 - Design factor (F) for steel pipe.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Design factor (F) for steel pipe. 192.111 Section...) for steel pipe. (a) Except as otherwise provided in paragraphs (b), (c), and (d) of this section, the... less must be used in the design formula in § 192.105 for steel pipe in Class 1 locations that: (1...

49 CFR 192.111 - Design factor (F) for steel pipe.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Design factor (F) for steel pipe. 192.111 Section...) for steel pipe. (a) Except as otherwise provided in paragraphs (b), (c), and (d) of this section, the... less must be used in the design formula in § 192.105 for steel pipe in Class 1 locations that: (1...

24 CFR 3285.306 - Design procedures for concrete block piers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... block piers. 3285.306 Section 3285.306 Housing and Urban Development Regulations Relating to Housing and....306 Design procedures for concrete block piers. (a) Frame piers less than 36 inches high. (1) Frame... blocks, 8 inches “ 8 inches “ 16 inches, when the design capacity of the block is not exceeded. (2) The...

46 CFR 169.809 - Charts and nautical publications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Charts and nautical publications. 169.809 Section 169.809 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL... vessels must carry adequate and up-to-date— (a) Charts; (b) Sailing directions; (c) Coast pilots; (d...

46 CFR 169.809 - Charts and nautical publications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Charts and nautical publications. 169.809 Section 169.809 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL... vessels must carry adequate and up-to-date— (a) Charts; (b) Sailing directions; (c) Coast pilots; (d...

32 CFR Appendix F to Part 197 - Procedures for Copying of Documents for the Foreign Relations of the United States Series

Code of Federal Regulations, 2010 CFR

2010-07-01

... Foreign Relations of the United States Series F Appendix F to Part 197 National Defense Department of...—Procedures for Copying of Documents for the Foreign Relations of the United States Series 1. The records will.../declassification and historical research branch staff member must be present at all times. 4. OSD will supply the...

32 CFR Appendix F to Part 197 - Procedures for Copying of Documents for the Foreign Relations of the United States Series

Code of Federal Regulations, 2011 CFR

2011-07-01

... Foreign Relations of the United States Series F Appendix F to Part 197 National Defense Department of...—Procedures for Copying of Documents for the Foreign Relations of the United States Series 1. The records will.../declassification and historical research branch staff member must be present at all times. 4. OSD will supply the...

48 CFR 252.245-7000 - Government-furnished mapping, charting, and geodesy property.

Code of Federal Regulations, 2011 CFR

2011-10-01

... mapping, charting, and geodesy property. 252.245-7000 Section 252.245-7000 Federal Acquisition Regulations..., charting, and geodesy property. As prescribed in 245.107(a), use the following clause: Government-Furnished Mapping, Charting, and Geodesy Property (DEC 1991) (a) Definition—Mapping, charting, and geodesy (MC&G...

48 CFR 252.245-7000 - Government-furnished mapping, charting, and geodesy property.

Code of Federal Regulations, 2013 CFR

2013-10-01

... mapping, charting, and geodesy property. 252.245-7000 Section 252.245-7000 Federal Acquisition Regulations..., charting, and geodesy property. As prescribed in 245.107(1), use the following clause: Government-Furnished Mapping, Charting, and Geodesy Property (APR 2012) (a) Definition—Mapping, charting, and geodesy (MC&G...

48 CFR 252.245-7000 - Government-furnished mapping, charting, and geodesy property.

Code of Federal Regulations, 2012 CFR

2012-10-01

... mapping, charting, and geodesy property. 252.245-7000 Section 252.245-7000 Federal Acquisition Regulations..., charting, and geodesy property. As prescribed in 245.107(1), use the following clause: Government-Furnished Mapping, Charting, and Geodesy Property (APR 2012) (a) Definition—Mapping, charting, and geodesy (MC&G...

48 CFR 252.245-7000 - Government-furnished mapping, charting, and geodesy property.

Code of Federal Regulations, 2014 CFR

2014-10-01

... mapping, charting, and geodesy property. 252.245-7000 Section 252.245-7000 Federal Acquisition Regulations..., charting, and geodesy property. As prescribed in 245.107(1), use the following clause: Government-Furnished Mapping, Charting, and Geodesy Property (APR 2012) (a) Definition—Mapping, charting, and geodesy (MC&G...

Chart Card: Feasibility of a Tool for Improving Emergency Department Care in Sickle Cell Disease

PubMed Central

Neumayr, Lynne; Pringle, Steven; Giles, Stephen; Quirolo, Keith C.; Paulukonis, Susan; Vichinsky, Elliott P.; Treadwell, Marsha J.

2016-01-01

Background Patients with sickle cell disease (SCD) are concerned with emergency department care, including time to treatment and staff attitudes and knowledge. Providers are concerned about rapid access to patient information and SCD treatment protocols. A software application that stores and retrieves encrypted personal medical information on a plastic credit card–sized Chart Card was designed. Objective To determine the applicability and feasibility of the Chart Card on patient satisfaction with emergency department care and provider accessibility to patient information and care protocols. Methods One-half of 44 adults (aged ~18 years) and 50 children with SCD were randomized to either the Chart Card or usual care. Patient satisfaction was surveyed pre and post implementation of the Chart Card program, and emergency department staff was surveyed about familiarity with SCD treatment protocols. Results Fifty-two percent of patients were female (mean age, 18.8 ± 15.6); 61% had SCD SS. Adults visited an emergency department 4.2 ± 4.0 times in the year prior to enrollment vs 2.7 ± 3.7 (p = .06) visits for children, most commonly for pain. Patient emergency department care ratings of very good or excellent increased from 47% to 66% (p < .05), and ratings of staff knowledge improved. Qualitative data reflected positive comments about patient and staff experiences with the Chart Card. Conclusion Patient satisfaction with emergency department care and efficacy in health care increased post Chart Card implementation. Providers valued immediate access to patient information and SCD treatment guidelines. The technology has potential for application in the treatment of other illnesses in other settings. PMID:21141289

Development of disease-specific growth charts in Turner syndrome and Noonan syndrome.

PubMed

Isojima, Tsuyoshi; Yokoya, Susumu

2017-12-01

Many congenital diseases are associated with growth failure, and patients with these diseases have specific growth patterns. As the growth patterns of affected individuals differ from those of normal populations, it is challenging to detect additional conditions that can influence growth using standard growth charts. Disease-specific growth charts are thus very useful tools and can be helpful for understanding the growth pattern and pathogenesis of congenital diseases. In addition, disease-specific growth charts allow doctors to detect deviations from the usual growth patterns for early diagnosis of an additional condition and can be used to evaluate the effects of growth-promoting treatment for patients. When developing these charts, factors that can affect the reliability of the charts should be considered. These factors include the definition of the disease with growth failure, selection bias in the measurements used to develop the charts, secular trends of the subjects, the numbers of subjects of varying ages and ethnicities, and the statistical method used to develop the charts. In this review, we summarize the development of disease-specific growth charts for Japanese individuals with Turner syndrome and Noonan syndrome and evaluate the efforts to collect unbiased measurements of subjects with these diseases. These charts were the only available disease-specific growth charts of Turner syndrome and Noonan syndrome for Asian populations and were developed using a Japanese population. Therefore, when these charts are adopted for Asian populations other than Japanese, different growth patterns should be considered.

Revised IAP growth charts for height, weight and body mass index for 5- to 18-year-old Indian children.

PubMed

Khadilkar, Vaman; Yadav, Sangeeta; Agrawal, K K; Tamboli, Suchit; Banerjee, Monidipa; Cherian, Alice; Goyal, Jagdish P; Khadilkar, Anuradha; Kumaravel, V; Mohan, V; Narayanappa, D; Ray, I; Yewale, Vijay

2015-01-01

The need to revise Indian Academy of Pediatrics (IAP) growth charts for 5- to 18-year-old Indian children and adolescents was felt as India is in nutrition transition and previous IAP charts are based on data which are over two decades old. The Growth Chart Committee was formed by IAP in January 2014 to design revised growth charts. Consultative meeting was held in November 2014 in Mumbai. Studies performed on Indian children's growth, nutritional assessment and anthropometry from upper and middle socioeconomic classes in last decade were identified. Committee contacted 13 study groups; total number of children in the age group of 5 to 18 years were 87022 (54086 boys). Data from fourteen cities (Agartala, Ahmadabad, Chandigarh, Chennai, Delhi, Hyderabad, Kochi, Kolkata, Madurai, Mumbai, Mysore, Pune, Raipur and Surat) in India were collated. Data of children with weight for height Z scores >2 SD were removed from analyses. Data on 33148 children (18170 males, 14978 females) were used to construct growth charts using Cole's LMS method. To construct revised IAP growth charts for 5-18 year old Indian children based on collated national data from published studies performed on apparently healthy children and adolescents in the last 10 years. The IAP growth chart committee recommends these revised growth charts for height, weight and body mass index (BMI) for assessment of growth of 5-18 year old Indian children to replace the previous IAP charts; rest of the recommendations for monitoring height and weight remain as per the IAP guidelines published in 2007. To define overweight and obesity in children from 5-18 years of age, adult equivalent of 23 and 27 cut-offs presented in BMI charts may be used. IAP recommends use of WHO standards for growth assessment of children below 5 years of age.

On the reliability of Shewhart-type control charts for multivariate process variability

NASA Astrophysics Data System (ADS)

Djauhari, Maman A.; Salleh, Rohayu Mohd; Zolkeply, Zunnaaim; Li, Lee Siaw

2017-05-01

We show that in the current practice of multivariate process variability monitoring, the reliability of Shewhart-type control charts cannot be measured except when the sub-group size n tends to infinity. However, the requirement of large n is meaningless not only in manufacturing industry where n is small but also in service industry where n is moderate. In this paper, we introduce a new definition of control limits in the two most appreciated control charts in the literature, i.e., the improved generalized variance chart (IGV-chart) and vector variance chart (VV-chart). With the new definition of control limits, the reliability of the control charts can be determined. Some important properties of new control limits will be derived and the computational technique of probability of false alarm will be delivered.

46 CFR 109.565 - Charts and nautical publications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Charts and nautical publications. 109.565 Section 109.565 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Miscellaneous § 109.565 Charts and nautical publications. The master or person in charge of a self...

46 CFR 109.565 - Charts and nautical publications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Charts and nautical publications. 109.565 Section 109.565 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Miscellaneous § 109.565 Charts and nautical publications. The master or person in charge of a self...

46 CFR 109.565 - Charts and nautical publications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Charts and nautical publications. 109.565 Section 109.565 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Miscellaneous § 109.565 Charts and nautical publications. The master or person in charge of a self...

46 CFR 109.565 - Charts and nautical publications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Charts and nautical publications. 109.565 Section 109.565 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Miscellaneous § 109.565 Charts and nautical publications. The master or person in charge of a self...

46 CFR 109.565 - Charts and nautical publications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Charts and nautical publications. 109.565 Section 109.565 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Miscellaneous § 109.565 Charts and nautical publications. The master or person in charge of a self...

46 CFR 184.420 - Charts and nautical publications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Charts and nautical publications. 184.420 Section 184... Charts and nautical publications. (a) As appropriate for the intended voyage, a vessel must carry... Pilot or similar publication; (3) Coast Guard Light List; (4) Tide tables; and (5) Current tables, or a...

46 CFR 184.420 - Charts and nautical publications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Charts and nautical publications. 184.420 Section 184... Charts and nautical publications. (a) As appropriate for the intended voyage, a vessel must carry... Pilot or similar publication; (3) Coast Guard Light List; (4) Tide tables; and (5) Current tables, or a...

The effectiveness of robust RMCD control chart as outliers’ detector

NASA Astrophysics Data System (ADS)

Darmanto; Astutik, Suci

2017-12-01

A well-known control chart to monitor a multivariate process is Hotelling’s T 2 which its parameters are estimated classically, very sensitive and also marred by masking and swamping of outliers data effect. To overcome these situation, robust estimators are strongly recommended. One of robust estimators is re-weighted minimum covariance determinant (RMCD) which has robust characteristics as same as MCD. In this paper, the effectiveness term is accuracy of the RMCD control chart in detecting outliers as real outliers. In other word, how effectively this control chart can identify and remove masking and swamping effects of outliers. We assessed the effectiveness the robust control chart based on simulation by considering different scenarios: n sample sizes, proportion of outliers, number of p quality characteristics. We found that in some scenarios, this RMCD robust control chart works effectively.

ICoN, the Interactive Chart of Nuclides

NASA Astrophysics Data System (ADS)

Lee, Kevin; Mumpower, Matthew; Aprahamian, Ani

2015-10-01

Nuclear data is critical to research fields from medicine to astrophysics. The chart of nuclides is a more descriptive version of the periodic table that can be used to visualize nuclear properties such as half-lives and mass. We have created ICoN (simply short for Interactive Chart of Nuclides), an API which can be used to visualize theoretical and experimental datasets. This visualization is achieved by using D3 (Data Driven Documents), HTML, and CSS3 to plot the elements and color them accordingly. ICoN features many customization options that users can access that are dynamically applied to the chart without reloading the page. Users can save the customized chart they create to various formats. We have constructed these features in order to provide a unique approach for researchers to interface with nuclear data. ICoN can also be used on all electronic devices without loss of support. We report on the current progress of this project and will present a working demo that highlights each aspect of the aforementioned features. This is the first time that all available technologies are put to use to make nuclear data more accessible than ever before. This is a first and we will make it available as open source ware.

fMRI paradigm designing and post-processing tools

PubMed Central

James, Jija S; Rajesh, PG; Chandran, Anuvitha VS; Kesavadas, Chandrasekharan

2014-01-01

In this article, we first review some aspects of functional magnetic resonance imaging (fMRI) paradigm designing for major cognitive functions by using stimulus delivery systems like Cogent, E-Prime, Presentation, etc., along with their technical aspects. We also review the stimulus presentation possibilities (block, event-related) for visual or auditory paradigms and their advantage in both clinical and research setting. The second part mainly focus on various fMRI data post-processing tools such as Statistical Parametric Mapping (SPM) and Brain Voyager, and discuss the particulars of various preprocessing steps involved (realignment, co-registration, normalization, smoothing) in these software and also the statistical analysis principles of General Linear Modeling for final interpretation of a functional activation result. PMID:24851001

Quality Control Charts in Large-Scale Assessment Programs

ERIC Educational Resources Information Center

Schafer, William D.; Coverdale, Bradley J.; Luxenberg, Harlan; Jin, Ying

2011-01-01

There are relatively few examples of quantitative approaches to quality control in educational assessment and accountability contexts. Among the several techniques that are used in other fields, Shewart charts have been found in a few instances to be applicable in educational settings. This paper describes Shewart charts and gives examples of how…

A 0.4-2.3 GHz broadband power amplifier extended continuous class-F design technology

NASA Astrophysics Data System (ADS)

Chen, Peng; He, Songbai

2015-08-01

A 0.4-2.3 GHz broadband power amplifier (PA) extended continuous class-F design technology is proposed in this paper. Traditional continuous class-F PA performs in high-efficiency only in one octave bandwidth. With the increasing development of wireless communication, the PA is in demand to cover the mainstream communication standards' working frequencies from 0.4 GHz to 2.2 GHz. In order to achieve this objective, the bandwidths of class-F and continuous class-F PA are analysed and discussed by Fourier series. Also, two criteria, which could reduce the continuous class-F PA's implementation complexity, are presented and explained to investigate the overlapping area of the transistor's current and voltage waveforms. The proposed PA design technology is based on the continuous class-F design method and divides the bandwidth into two parts: the first part covers the bandwidth from 1.3 GHz to 2.3 GHz, where the impedances are designed by the continuous class-F method; the other part covers the bandwidth from 0.4 GHz to 1.3 GHz, where the impedance to guarantee PA to be in high-efficiency over this bandwidth is selected and controlled. The improved particle swarm optimisation is employed for realising the multi-impedances of output and input network. A PA based on a commercial 10 W GaN high electron mobility transistor is designed and fabricated to verify the proposed design method. The simulation and measurement results show that the proposed PA could deliver 40-76% power added efficiency and more than 11 dB power gain with more than 40 dBm output power over the bandwidth from 0.4-2.3 GHz.

The retrospective chart review: important methodological considerations.

PubMed

Vassar, Matt; Holzmann, Matthew

2013-01-01

In this paper, we review and discuss ten common methodological mistakes found in retrospective chart reviews. The retrospective chart review is a widely applicable research methodology that can be used by healthcare disciplines as a means to direct subsequent prospective investigations. In many cases in this review, we have also provided suggestions or accessible resources that researchers can apply as a "best practices" guide when planning, conducting, or reviewing this investigative method.

An Assessment of Statistical Process Control-Based Approaches for Charting Student Evaluation Scores

ERIC Educational Resources Information Center

Ding, Xin; Wardell, Don; Verma, Rohit

2006-01-01

We compare three control charts for monitoring data from student evaluations of teaching (SET) with the goal of improving student satisfaction with teaching performance. The two charts that we propose are a modified "p" chart and a z-score chart. We show that these charts overcome some of the shortcomings of the more traditional charts…

Integral flange design program. [procedure for computing stresses

NASA Technical Reports Server (NTRS)

Wilson, J. F.

1974-01-01

An automated interactive flange design program utilizing an electronic desk top calculator is presented. The program calculates the operating and seating stresses for circular flanges of the integral or optional type subjected to internal pressure. The required input information is documented. The program provides an automated procedure for computing stresses in selected flange geometries for comparison to the allowable code values.

Development of a turbomachinery design optimization procedure using a multiple-parameter nonlinear perturbation method

NASA Technical Reports Server (NTRS)

Stahara, S. S.

1984-01-01

An investigation was carried out to complete the preliminary development of a combined perturbation/optimization procedure and associated computational code for designing optimized blade-to-blade profiles of turbomachinery blades. The overall purpose of the procedures developed is to provide demonstration of a rapid nonlinear perturbation method for minimizing the computational requirements associated with parametric design studies of turbomachinery flows. The method combines the multiple parameter nonlinear perturbation method, successfully developed in previous phases of this study, with the NASA TSONIC blade-to-blade turbomachinery flow solver, and the COPES-CONMIN optimization procedure into a user's code for designing optimized blade-to-blade surface profiles of turbomachinery blades. Results of several design applications and a documented version of the code together with a user's manual are provided.

Requirements for emergent neurosurgical procedures among patients undergoing neuroendovascular procedures in contemporary practice.

PubMed

Khatri, R; Ansar, M; Sultan, F; Chaudhry, S A; Khan, A A; Rodriguez, G J; Tummala, R P; Qureshi, A I

2012-03-01

Provisions for an emergent neurosurgical procedure have been a mandatory component of centers that perform neuroendovascular procedures. We sought to determine the need for emergent neurosurgical procedures following neuroendovascular interventions in 2 comprehensive stroke centers in settings with such provisions. Analysis of retrospectively collected data from procedure logs and patient charts was performed to identify patients who required immediate (before the termination of the intervention) or adjunctive (within 24 hours of the intervention) neurosurgical procedures related to a neuroendovascular intervention complication. The types of neurosurgical procedures and in-hospital outcomes of identified patients are reported as an aggregate and per endovascular procedure-type analyses. We reviewed a total of 933 neuroendovascular procedures performed during 3.5 years (2006-2010). A total of 759 intracranial procedures were performed. There was a need for emergent neurosurgical procedures in 8 patients (0.85% cumulative incidence and 1.05% for major intracranial procedures) (mean age, 46 years; 7 were women); the procedures were categorized as 3 immediate and 5 adjunctive procedures. There were 5 in-hospital deaths (62.5%) among these 8 patients. Neurosurgical procedures performed were external ventricular drainage placement in 6 (6 of 8, 75%) patients, decompressive craniectomy in 1 (12.5%) patient, and both surgical procedures in 1 (12.5%) patient. The need for emergent neurosurgical procedures is very low among patients undergoing intracranial neuroendovascular procedures. Survival in such patients despite emergent neurosurgical procedures is quite low.

Absorption of infrared radiation by carbon monoxide at elevated temperatures and pressures: Part B. Total emissivity charts and correlations

NASA Astrophysics Data System (ADS)

Alberti, Michael; Weber, Roman; Mancini, Marco

2017-10-01

The line-by-line procedure developed in the associated paper (Part A ) has been used to generate the total emissivity chart for pure CO and CO -N2 /air mixtures at 1 bar total pressure, in the 300 to 3000 K temperature and 0.01 to 3000 bar cm pressure path length range. Methods of scaling the emissivity to pressures different to 1 bar, in the range 0.1 to 40 bar, are provided through pressure correction graphs and EXCEL interpolator (Supplementary Material). The interpolated emissivities are within ± 2% margin from the line-by-line calculated values. The newly developed emissivity graphs are substantially more accurate than the existing Ulrich (1936) & Hottel (1954) and Abu-Romia & Tien (1966) charts.

7 CFR 15f.5 - How do I request that USDA consider my complaint under these procedures?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false How do I request that USDA consider my complaint under... UNDER SECTION 741 I Filed a Complaint With USDA Prior to July 1, 1997, How Do I Request That USDA Consider My Complaint Using These Procedures? § 15f.5 How do I request that USDA consider my complaint...

7 CFR 15f.5 - How do I request that USDA consider my complaint under these procedures?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 1 2011-01-01 2011-01-01 false How do I request that USDA consider my complaint under... UNDER SECTION 741 I Filed a Complaint With USDA Prior to July 1, 1997, How Do I Request That USDA Consider My Complaint Using These Procedures? § 15f.5 How do I request that USDA consider my complaint...

7 CFR 15f.5 - How do I request that USDA consider my complaint under these procedures?

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 1 2012-01-01 2012-01-01 false How do I request that USDA consider my complaint under... UNDER SECTION 741 I Filed a Complaint With USDA Prior to July 1, 1997, How Do I Request That USDA Consider My Complaint Using These Procedures? § 15f.5 How do I request that USDA consider my complaint...

7 CFR 15f.5 - How do I request that USDA consider my complaint under these procedures?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 1 2014-01-01 2014-01-01 false How do I request that USDA consider my complaint under... UNDER SECTION 741 I Filed a Complaint With USDA Prior to July 1, 1997, How Do I Request That USDA Consider My Complaint Using These Procedures? § 15f.5 How do I request that USDA consider my complaint...

7 CFR 15f.5 - How do I request that USDA consider my complaint under these procedures?

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 1 2013-01-01 2013-01-01 false How do I request that USDA consider my complaint under... UNDER SECTION 741 I Filed a Complaint With USDA Prior to July 1, 1997, How Do I Request That USDA Consider My Complaint Using These Procedures? § 15f.5 How do I request that USDA consider my complaint...

47 CFR 73.190 - Engineering charts and related formulas.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Engineering charts and related formulas. 73.190 Section 73.190 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES AM Broadcast Stations § 73.190 Engineering charts and related formulas. (a...

47 CFR 73.190 - Engineering charts and related formulas.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Engineering charts and related formulas. 73.190 Section 73.190 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES AM Broadcast Stations § 73.190 Engineering charts and related formulas. (a...

47 CFR 73.190 - Engineering charts and related formulas.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Engineering charts and related formulas. 73.190 Section 73.190 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES AM Broadcast Stations § 73.190 Engineering charts and related formulas. (a...

47 CFR 73.190 - Engineering charts and related formulas.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Engineering charts and related formulas. 73.190 Section 73.190 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES AM Broadcast Stations § 73.190 Engineering charts and related formulas. (a...

47 CFR 73.190 - Engineering charts and related formulas.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Engineering charts and related formulas. 73.190 Section 73.190 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES AM Broadcast Stations § 73.190 Engineering charts and related formulas. (a...

N-gram support vector machines for scalable procedure and diagnosis classification, with applications to clinical free text data from the intensive care unit.

PubMed

Marafino, Ben J; Davies, Jason M; Bardach, Naomi S; Dean, Mitzi L; Dudley, R Adams

2014-01-01

Existing risk adjustment models for intensive care unit (ICU) outcomes rely on manual abstraction of patient-level predictors from medical charts. Developing an automated method for abstracting these data from free text might reduce cost and data collection times. To develop a support vector machine (SVM) classifier capable of identifying a range of procedures and diagnoses in ICU clinical notes for use in risk adjustment. We selected notes from 2001-2008 for 4191 neonatal ICU (NICU) and 2198 adult ICU patients from the MIMIC-II database from the Beth Israel Deaconess Medical Center. Using these notes, we developed an implementation of the SVM classifier to identify procedures (mechanical ventilation and phototherapy in NICU notes) and diagnoses (jaundice in NICU and intracranial hemorrhage (ICH) in adult ICU). On the jaundice classification task, we also compared classifier performance using n-gram features to unigrams with application of a negation algorithm (NegEx). Our classifier accurately identified mechanical ventilation (accuracy=0.982, F1=0.954) and phototherapy use (accuracy=0.940, F1=0.912), as well as jaundice (accuracy=0.898, F1=0.884) and ICH diagnoses (accuracy=0.938, F1=0.943). Including bigram features improved performance on the jaundice (accuracy=0.898 vs 0.865) and ICH (0.938 vs 0.927) tasks, and outperformed NegEx-derived unigram features (accuracy=0.898 vs 0.863) on the jaundice task. Overall, a classifier using n-gram support vectors displayed excellent performance characteristics. The classifier generalizes to diverse patient populations, diagnoses, and procedures. SVM-based classifiers can accurately identify procedure status and diagnoses among ICU patients, and including n-gram features improves performance, compared to existing methods. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Value-cell bar charts for visualizing large transaction data sets.

PubMed

Keim, Daniel A; Hao, Ming C; Dayal, Umeshwar; Lyons, Martha

2007-01-01

One of the common problems businesses need to solve is how to use large volumes of sales histories, Web transactions, and other data to understand the behavior of their customers and increase their revenues. Bar charts are widely used for daily analysis, but only show highly aggregated data. Users often need to visualize detailed multidimensional information reflecting the health of their businesses. In this paper, we propose an innovative visualization solution based on the use of value cells within bar charts to represent business metrics. The value of a transaction can be discretized into one or multiple cells: high-value transactions are mapped to multiple value cells, whereas many small-value transactions are combined into one cell. With value-cell bar charts, users can 1) visualize transaction value distributions and correlations, 2) identify high-value transactions and outliers at a glance, and 3) instantly display values at the transaction record level. Value-Cell Bar Charts have been applied with success to different sales and IT service usage applications, demonstrating the benefits of the technique over traditional charting techniques. A comparison with two variants of the well-known Treemap technique and our earlier work on Pixel Bar Charts is also included.

Preliminary design notes on a low F-number EMR

NASA Technical Reports Server (NTRS)

Mihora, D. J.

1982-01-01

Conceptual design studies were completed on a new Electrostatic Membrane Reflector, EMR. This new model incorporates both a preformed, curved membrane reflector and membrane control surface. This improved model is the second step toward a high precision large space antenna that could eventually exhibit a performance in terms of aperture diameter to surface quality exceeding 1,000,000. Design trades indicate that the goal of a low ratio of focal length to aperture diameter (f sub n) can be achieved while operating in a humid sea-level environment. A nominal surface quality of 1.0 mm (RMS) is possible using available off-the-shelf commercial membranes. Both the membrane reflector and control electrode surface are fabricated from 12 gore segments and attached to the available 12 sided, 4.88 m diameter rim. The preferred conceptual design has a f sub n = 1.0. The 4.88 m aperture is performed with a centerline displacement of 0.306 m. The nominal spacing between the membrane reflector and the electrode control surface is 50.8 mm. The centerline membrane displacement from its performed to its tensioned, smooth shape is about 3 mm. The membrane tensioning is achieved by application of an electrostatic pressure of 2.6 N/sq cm and a voltage of about 38 kV.

Investigation of Low-Reynolds-Number Rocket Nozzle Design Using PNS-Based Optimization Procedure

NASA Technical Reports Server (NTRS)

Hussaini, M. Moin; Korte, John J.

1996-01-01

An optimization approach to rocket nozzle design, based on computational fluid dynamics (CFD) methodology, is investigated for low-Reynolds-number cases. This study is undertaken to determine the benefits of this approach over those of classical design processes such as Rao's method. A CFD-based optimization procedure, using the parabolized Navier-Stokes (PNS) equations, is used to design conical and contoured axisymmetric nozzles. The advantage of this procedure is that it accounts for viscosity during the design process; other processes make an approximated boundary-layer correction after an inviscid design is created. Results showed significant improvement in the nozzle thrust coefficient over that of the baseline case; however, the unusual nozzle design necessitates further investigation of the accuracy of the PNS equations for modeling expanding flows with thick laminar boundary layers.

Monitoring of International Space Station Telemetry Using Shewhart Control Charts

NASA Technical Reports Server (NTRS)

Fitch, Jeffery T.; Simon, Alan L.; Gouveia, John A.; Hillin, Andrew M.; Hernandez, Steve A.

2012-01-01

Shewhart control charts have been established as an expedient method for analyzing dynamic, trending data in order to identify anomalous subsystem performance as soon as such performance would exceed a statistically established baseline. Additionally, this leading indicator tool integrates a selection methodology that reduces false positive indications, optimizes true leading indicator events, minimizes computer processor unit duty cycles, and addresses human factor concerns (i.e., the potential for flight-controller data overload). This innovation leverages statistical process control, and provides a relatively simple way to allow flight controllers to focus their attention on subtle system changes that could lead to dramatic off-nominal system performance. Finally, this capability improves response time to potential hardware damage and/or crew injury, thereby improving space flight safety. Shewhart control charts require normalized data. However, the telemetry from the ISS Early External Thermal Control System (EETCS) was not normally distributed. A method for normalizing the data was implemented, as was a means of selecting data windows, the number of standard deviations (Sigma Level), the number of consecutive points out of limits (Sequence), and direction (increasing or decreasing trend data). By varying these options, and treating them like dial settings, the number of nuisance alerts and leading indicators were optimized. The goal was to capture all leading indicators while minimizing the number of nuisances. Lean Six Sigma (L6S) design of experiment methodologies were employed. To optimize the results, Perl programming language was used to automate the massive amounts of telemetry data, control chart plots, and the data analysis.

SeaWiFS Science Algorithm Flow Chart

NASA Technical Reports Server (NTRS)

Darzi, Michael

1998-01-01

This flow chart describes the baseline science algorithms for the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Data Processing System (SDPS). As such, it includes only processing steps used in the generation of the operational products that are archived by NASA's Goddard Space Flight Center (GSFC) Distributed Active Archive Center (DAAC). It is meant to provide the reader with a basic understanding of the scientific algorithm steps applied to SeaWiFS data. It does not include non-science steps, such as format conversions, and places the greatest emphasis on the geophysical calculations of the level-2 processing. Finally, the flow chart reflects the logic sequences and the conditional tests of the software so that it may be used to evaluate the fidelity of the implementation of the scientific algorithm. In many cases however, the chart may deviate from the details of the software implementation so as to simplify the presentation.

Centile charts for birthweight for gestational age for Scottish singleton births

PubMed Central

Bonellie, Sandra; Chalmers, James; Gray, Ron; Greer, Ian; Jarvis, Stephen; Williams, Claire

2008-01-01

Background Centile charts of birthweight for gestational age are used to identify low birthweight babies. The charts currently used in Scotland are based on data from the 1970s and require updating given changes in birthweight and in the measurement of gestational age since then. Methods Routinely collected data of 100,133 singleton births occurring in Scotland from 1998–2003 were used to construct new centile charts using the LMS method. Results Centile charts for birthweight for sex and parity groupings were constructed for singleton birth and compared to existing charts used in Scottish hospitals. Conclusion Mean birthweight has been shown to have increased over recent decades. The differences shown between the new and currently used centiles confirm the need for more up-to-date centiles for birthweight for gestational age. PMID:18298810

New S control chart using skewness correction method for monitoring process dispersion of skewed distributions

NASA Astrophysics Data System (ADS)

Atta, Abdu; Yahaya, Sharipah; Zain, Zakiyah; Ahmed, Zalikha

2017-11-01

Control chart is established as one of the most powerful tools in Statistical Process Control (SPC) and is widely used in industries. The conventional control charts rely on normality assumption, which is not always the case for industrial data. This paper proposes a new S control chart for monitoring process dispersion using skewness correction method for skewed distributions, named as SC-S control chart. Its performance in terms of false alarm rate is compared with various existing control charts for monitoring process dispersion, such as scaled weighted variance S chart (SWV-S); skewness correction R chart (SC-R); weighted variance R chart (WV-R); weighted variance S chart (WV-S); and standard S chart (STD-S). Comparison with exact S control chart with regards to the probability of out-of-control detections is also accomplished. The Weibull and gamma distributions adopted in this study are assessed along with the normal distribution. Simulation study shows that the proposed SC-S control chart provides good performance of in-control probabilities (Type I error) in almost all the skewness levels and sample sizes, n. In the case of probability of detection shift the proposed SC-S chart is closer to the exact S control chart than the existing charts for skewed distributions, except for the SC-R control chart. In general, the performance of the proposed SC-S control chart is better than all the existing control charts for monitoring process dispersion in the cases of Type I error and probability of detection shift.

Correlations between M-CHARTS and PHP findings and subjective perception of metamorphopsia in patients with macular diseases.

PubMed

Arimura, Eiko; Matsumoto, Chota; Nomoto, Hiroki; Hashimoto, Shigeki; Takada, Sonoko; Okuyama, Sachiko; Shimomura, Yoshikazu

2011-01-05

To assess the correlations between a patient's subjective perception of metamorphopsia and the clinical measurements of metamorphopsia by M-CHARTS and PreView PHP (PHP). The authors designed a 10-item questionnaire focusing on the symptoms of metamorphopsia and verified its validity with a Rasch analysis. M-CHARTS measured the minimum visual angle of a dotted line needed to detect metamorphopsia, and PHP used the hyperacuity function for detection. Subjects were 39 patients with idiopathic epiretinal membrane (ERM), 22 patients with idiopathic macular hole (M-hole), 19 patients with age-related macular degeneration (AMD), and 51 healthy controls. Rasch analysis suggested the elimination of one question. The nine-item questionnaire score significantly correlated to the M-CHARTS score in ERM (r = 0.59; P = 0.0004) but not in M-hole and to the PHP result in AMD (r = -0.29; P = 0.04) but not in ERM. Eighty percent of ERM patients with greater horizontal M-CHARTS score subjectively perceived horizontal metamorphopsia more often. M-CHARTS showed better sensitivities than PHP in both ERM (89% vs. 42%) and AMD (74% vs. 68%) and better specificity (100% vs. 71%) in healthy controls. Rasch analysis indicated that the present form of the questionnaire is better suited for moderate to severe cases of metamorphopsia than for mild cases. The questionnaire appears to be a valid assessment of patient subjective perception of metamorphopsia and can be used to supplement the clinical measurements of metamorphopsia by M-CHARTS and PHP in patients with macular diseases.

CATS EYES Adjustment Procedures

DTIC Science & Technology

1993-04-01

AL-TR-1 993-0025 AD-A264 069 CATS EYES ADJUSTMENT PROCEDURES A R M Joseph C. Antonio DTIC S ELECTET University of Dayton Research Institute MAY 13...Final November 1992 - January 1993 4. TITLE AND SUBTITLE S. FUNDING NUMBERS C F33615-90-C-0005 CATS EYES Adjustment Procedures PE - 62205F 6. AUTHOR(S) PR...the loss of NVG performance resulting from improper goggle adjustments. This report describes correct adjustment procedures for the CATS EYES NVG system

Development of electronic medical record charting for hospital-based transfusion and apheresis medicine services: Early adoption perspectives

PubMed Central

Levy, Rebecca; Pantanowitz, Liron; Cloutier, Darlene; Provencher, Jean; McGirr, Joan; Stebbins, Jennifer; Cronin, Suzanne; Wherry, Josh; Fenton, Joseph; Donelan, Eileen; Johari, Vandita; Andrzejewski, Chester

2010-01-01

Background: Electronic medical records (EMRs) provide universal access to health care information across multidisciplinary lines. In pathology departments, transfusion and apheresis medicine services (TAMS) involved in direct patient care activities produce data and documentation that typically do not enter the EMR. Taking advantage of our institution's initiative for implementation of a paperless medical record, our TAMS division set out to develop an electronic charting (e-charting) strategy within the EMR. Methods: A focus group of our hospital's transfusion committee consisting of transfusion medicine specialists, pathologists, residents, nurses, hemapheresis specialists, and information technologists was constituted and charged with the project. The group met periodically to implement e-charting TAMS workflow and produced electronic documents within the EMR (Cerner Millenium) for various service line functions. Results: The interdisciplinary working group developed and implemented electronic versions of various paper-based clinical documentation used by these services. All electronic notes collectively gather and reside within a unique Transfusion Medicine Folder tab in the EMR, available to staff with access to patient charts. E-charting eliminated illegible handwritten notes, resulted in more consistent clinical documentation among staff, and provided greater realered. However, minor updates and corrections to documents as well as select work re-designs were required for optimal use of e-charting-time review/access of hemotherapy practices. No major impediments to workflow or inefficiencies have been encount by these services. Conclusion: Documentation of pathology subspecialty activities such as TAMS can be successfully incorporated into the EMR. E-charting by staff enhances communication and helps promote standardized documentation of patient care within and across service lines. Well-constructed electronic documents in the EMR may also enhance data mining

DNAism: exploring genomic datasets on the web with Horizon Charts.

PubMed

Rio Deiros, David; Gibbs, Richard A; Rogers, Jeffrey

2016-01-27

Computational biologists daily face the need to explore massive amounts of genomic data. New visualization techniques can help researchers navigate and understand these big data. Horizon Charts are a relatively new visualization method that, under the right circumstances, maximizes data density without losing graphical perception. Horizon Charts have been successfully applied to understand multi-metric time series data. We have adapted an existing JavaScript library (Cubism) that implements Horizon Charts for the time series domain so that it works effectively with genomic datasets. We call this new library DNAism. Horizon Charts can be an effective visual tool to explore complex and large genomic datasets. Researchers can use our library to leverage these techniques to extract additional insights from their own datasets.

Evaluation of Shiryaev-Roberts Procedure for On-line Environmental Radiation Monitoring

NASA Astrophysics Data System (ADS)

Watson, Mara Mae

An on-line radiation monitoring system that simultaneously concentrates and detects radioactivity is needed to detect an accidental leakage from a nuclear waste disposal facility or clandestine nuclear activity. Previous studies have shown that classical control chart methods can be applied to on-line radiation monitoring data to quickly detect these events as they occur; however, Bayesian control chart methods were not included in these studies. This work will evaluate the performance of a Bayesian control chart method, the Shiryaev-Roberts (SR) procedure, compared to classical control chart methods, Shewhart 3-sigma and cumulative sum (CUSUM), for use in on-line radiation monitoring of 99Tc in water using extractive scintillating resin. Measurements were collected by pumping solutions containing 0.1-5 Bq/L of 99Tc, as 99T cO4-, through a flow cell packed with extractive scintillating resin coupled to a Beta-RAM Model 5 HPLC detector. While 99T cO4- accumulated on the resin, simultaneous measurements were acquired in 10-s intervals and then re-binned to 100-s intervals. The Bayesian statistical method, Shiryaev-Roberts procedure, and classical control chart methods, Shewhart 3-sigma and cumulative sum (CUSUM), were applied to the data using statistical algorithms developed in MATLAB RTM. Two SR control charts were constructed using Poisson distributions and Gaussian distributions to estimate the likelihood ratio, and are referred to as Poisson SR and Gaussian SR to indicate the distribution used to calculate the statistic. The Poisson and Gaussian SR methods required as little as 28.9 mL less solution at 5 Bq/L and as much as 170 mL less solution at 0.5 Bq/L to exceed the control limit than the Shewhart 3-sigma method. The Poisson SR method needed as little as 6.20 mL less solution at 5 Bq/L and up to 125 mL less solution at 0.5 Bq/L to exceed the control limit than the CUSUM method. The Gaussian SR and CUSUM method required comparable solution volumes for test

fMRI Validation of fNIRS Measurements During a Naturalistic Task

PubMed Central

Noah, J. Adam; Ono, Yumie; Nomoto, Yasunori; Shimada, Sotaro; Tachibana, Atsumichi; Zhang, Xian; Bronner, Shaw; Hirsch, Joy

2015-01-01

We present a method to compare brain activity recorded with near-infrared spectroscopy (fNIRS) in a dance video game task to that recorded in a reduced version of the task using fMRI (functional magnetic resonance imaging). Recently, it has been shown that fNIRS can accurately record functional brain activities equivalent to those concurrently recorded with functional magnetic resonance imaging for classic psychophysical tasks and simple finger tapping paradigms. However, an often quoted benefit of fNIRS is that the technique allows for studying neural mechanisms of complex, naturalistic behaviors that are not possible using the constrained environment of fMRI. Our goal was to extend the findings of previous studies that have shown high correlation between concurrently recorded fNIRS and fMRI signals to compare neural recordings obtained in fMRI procedures to those separately obtained in naturalistic fNIRS experiments. Specifically, we developed a modified version of the dance video game Dance Dance Revolution (DDR) to be compatible with both fMRI and fNIRS imaging procedures. In this methodology we explain the modifications to the software and hardware for compatibility with each technique as well as the scanning and calibration procedures used to obtain representative results. The results of the study show a task-related increase in oxyhemoglobin in both modalities and demonstrate that it is possible to replicate the findings of fMRI using fNIRS in a naturalistic task. This technique represents a methodology to compare fMRI imaging paradigms which utilize a reduced-world environment to fNIRS in closer approximation to naturalistic, full-body activities and behaviors. Further development of this technique may apply to neurodegenerative diseases, such as Parkinson’s disease, late states of dementia, or those with magnetic susceptibility which are contraindicated for fMRI scanning. PMID:26132365

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (G-MSO...

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (G-MSO...

Design Procedures and Analysis of Turbine Rotor Fragment Hazard Containment

DOT National Transportation Integrated Search

1997-03-01

Containment design procedures are reviewed through an extensive literature summary that spans 23 years of research from 1970 to 1993. Sixty-four reports are summarized and cross referenced to provide a useful bibliography on the subject. Comments fro...

Assessing achievement in nephrology training: using clinic chart audits to quantitatively screen competency.

PubMed

Yuan, Christina M; Prince, Lisa K; Zwettler, Amy J; Nee, Robert; Oliver, James D; Abbott, Kevin C

2014-11-01

Entrustable professional activities (EPAs) are complex tasks representing vital physician functions in multiple competencies, used to demonstrate trainee development along milestones. Managing a nephrology outpatient clinic has been proposed as an EPA for nephrology fellowship training. Retrospective cohort study of nephrology fellow outpatient clinic performance using a previously validated chart audit tool. Outpatient encounter chart audits for training years 2008-2009 through 2012-2013, corresponding to participation in the Nephrology In-Training Examination (ITE). A median of 7 auditors (attending nephrologists) audited a mean of 1,686±408 (SD) charts per year. 18 fellows were audited; 12, in both of their training years. Proportion of chart audit and quality indicator deficiencies. Longitudinal deficiency and ITE performance. Among fellows audited in both their training years, chart audit deficiencies were fewer in the second versus the first year (5.4%±2.0% vs 17.3%±7.0%; P<0.001) and declined between the first and second halves of the first year (22.2%±6.4% vs 12.3%±9.5%; P=0.002). Most deficiencies were omission errors, regardless of training year. Quality indicator deficiencies for hypertension and chronic kidney disease-associated anemia recognition and management were fewer during the second year (P<0.001). Yearly audit deficiencies ≥5% were associated with an ITE score less than the 25th percentile for second-year fellows (P=0.03), with no significant association for first-year fellows. Auditor-reported deficiencies declined between the first and second halves of the year (17.0% vs 11.1%; P<0.001), with a stable positive/neutral comment rate (17.3% vs 17.8%; P=0.6), suggesting that the decline was not due to auditor fatigue. Retrospective design and small trainee numbers. Managing a nephrology outpatient clinic is an EPA. The chart audit tool was used to assess longitudinal fellow performance in managing a nephrology outpatient clinic. Failure

Auditing the nutrition content of patient charts: one hospital's perspective.

PubMed

Skopelianos, S

1993-01-01

Chart audits are traditionally based on patient charts categorized by disease. An alternate approach, using categorization by four types of nutrition care intervention, has been developed by University Hospital. This paper describes the process followed, criteria developed and the results of two complete chart audits. It was shown that nutrition profile forms improved documentation. Overall norms increased significantly from 81.5% to 90% (p < .05). Discussion centres on the evolutionary process from quality assurance to continuous quality improvement.

Operational Control Procedures for the Activated Sludge Process: Appendix.

ERIC Educational Resources Information Center

West, Alfred W.

This document is the appendix for a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. Categories discussed include: control test data, trend charts, moving averages, semi-logarithmic plots, probability…

Shape Memory Alloy Isolation Valves: Public Quad Chart

DTIC Science & Technology

2017-05-12

NUMBER (Include area code) 12 May 2017 Briefing Charts 12 April 2017 - 12 May 2017 Shape Memory Alloy Isolation Valves: Public Quad Chart William...Unclassified Unclassified Unclassified SAR 2 William Hargus N/A PAYOFF/TRANSITIONTECHNICAL APPROACH MOTIVATION APPLYING AFRL TO SUSTAINMENT • Evaluate...spacecraft (15+ yrs) • Shaped memory alloy isolation valves provide an intrinsically safe isolation system that increases lifetime >5x over SOTA and

Filled Radar Charts Should Not Be Used to Compare Social Indicators

ERIC Educational Resources Information Center

Feldman, Roger

2013-01-01

The use of "radar charts" is an increasingly popular way to present spatial data in a visually interesting format. Some authors recommend using "filled radar charts" to compare the performance of observational units. Filled radar charts are not appropriate for such comparisons because the size of the area within the polygon is not invariant to the…

Three-Dimensional Nuclear Chart--Understanding Nuclear Physics and Nucleosynthesis in Stars

ERIC Educational Resources Information Center

Koura, Hiroyuki

2014-01-01

Three-dimensional (3D) nuclear charts were created using toy blocks, which represent the atomic masses per nucleon number and the total half-lives for each nucleus in the entire region of the nuclear mass. The bulk properties of the nuclei can be easily understood by using these charts. Subsequently, these charts were used in outreach activities…

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (CG-ENG-5...

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (CG-ENG-5...

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (CG-ENG-5...

14 CFR Section 3 - Chart of Balance Sheet Accounts

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Chart of Balance Sheet Accounts Section 3 Section 3 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION... Balance Sheet Classifications Section 3 Chart of Balance Sheet Accounts [See footnotes at end of table...

14 CFR Section 3 - Chart of Balance Sheet Accounts

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Chart of Balance Sheet Accounts Section 3 Section 3 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION... Balance Sheet Classifications Section 3 Chart of Balance Sheet Accounts [See footnotes at end of table...

Toward developing a standardized Arabic continuous text reading chart.

PubMed

Alabdulkader, Balsam; Leat, Susan Jennifer

Near visual acuity is an essential measurement during an oculo-visual assessment. Short duration continuous text reading charts measure reading acuity and other aspects of reading performance. There is no standardized version of such chart in Arabic. The aim of this study is to create sentences of equal readability to use in the development of a standardized Arabic continuous text reading chart. Initially, 109 Arabic pairs of sentences were created for use in constructing a chart with similar layout to the Colenbrander chart. They were created to have the same grade level of difficulty and physical length. Fifty-three adults and sixteen children were recruited to validate the sentences. Reading speed in correct words per minute (CWPM) and standard length words per minute (SLWPM) was measured and errors were counted. Criteria based on reading speed and errors made in each sentence pair were used to exclude sentence pairs with more outlying characteristics, and to select the final group of sentence pairs. Forty-five sentence pairs were selected according to the elimination criteria. For adults, the average reading speed for the final sentences was 166 CWPM and 187 SLWPM and the average number of errors per sentence pair was 0.21. Childrens' average reading speed for the final group of sentences was 61 CWPM and 72 SLWPM. Their average error rate was 1.71. The reliability analysis showed that the final 45 sentence pairs are highly comparable. They will be used in constructing an Arabic short duration continuous text reading chart. Copyright © 2016 Spanish General Council of Optometry. Published by Elsevier España, S.L.U. All rights reserved.

A SYSTEMATIC PROCEDURE FOR DESIGNING PROCESSES WITH MULTIPLE ENVIRONMENTAL OBJECTIVES

EPA Science Inventory

Evaluation and analysis of multiple objectives are very important in designing environmentally benign processes. They require a systematic procedure for solving multi-objective decision-making problems due to the complex nature of the problems and the need for complex assessment....

Modeling of Mn/Road test sections with the CRREL mechanistic pavement design procedure

DOT National Transportation Integrated Search

1996-09-01

The U.S. Army Cold Regions Research and Engineering Laboratory is developing a mechanistic pavement design procedure for use in seasonal frost areas. The procedure was used to predict pavement performance of some test sections under construction at t...

Development of test procedure for the design of black base : final report.

DOT National Transportation Integrated Search

1976-01-01

There is no standard design procedure available for black base mixes containing aggregates larger than 1" (25.4 mm) This investigation dealt with the use of stability testing equipment similar to that used in the design of surface mixes and developme...

Rock riprap design for protection of stream channels near highway structures; Volume 2, Evaluation of Riprap design procedures

USGS Publications Warehouse

Blodgett, J.C.; McConaughy, C.E.

1986-01-01

In volume 2, seven procedures now being used for design of rock riprap installations were evaluated using data from 26 field sites. Four basic types of riprap failures were identified: Particle erosion, translational slide, modified slump, and slump. Factors associated with riprap failure include stone size , bank side slope, size gradation, thickness, insufficient toe or endwall, failure of the bank material, overtopping during floods, and geomorphic changes in the channel. A review of field data and the design procedures suggests that estimates of hydraulic forces acting on the boundary based on flow velocity rather than shear stress are more reliable. Several adjustments for local conditions, such as channel curvature, superelevation, or boundary roughness, may be unwarranted in view of the difficulty in estimating critical hydraulic forces for which the riprap is to be designed. Success of the riprap is related not only to the appropriate procedure for selecting stone size, but also to the reliability of estimated hydraulic and channel factors applicable to the site. (See also W89-04910) (Author 's abstract)

A design procedure for active control of beam vibrations

NASA Technical Reports Server (NTRS)

Dickerson, S. L.; Jarocki, G.

1983-01-01

The transverse vibrations of beams is discussed and a methodology for the design of an active damping device is given. The Bernoulli-Euler equation is used to derive a transcendental transfer function, which relates a torque applied at one end of the beam to the rotational position and velocity at that point. The active damping device consists of a wire, a linear actuator and a short torque arm attached to one end of the beam. The action of the actuator varies a tension in the wire and creates a torque which opposes the rotation of the beam and thus damps vibration. A design procedure for such an active damper is given. This procedure shows the relationships and trade-offs between the actuator stroke, power required, stress levels in the wire and beam and the geometry of the beam and wire. It is shown that by consideration of the frequency response at the beam natural frequencies, the aforementioned relationships can be greatly simplified. Similarly, a simple way of estimating the effective damping ratios and eigenvalue locations of actively controlled beams is presented.

Subtle Nonlinearity in Popular Album Charts

NASA Astrophysics Data System (ADS)

Bentley, R. Alexander; Maschner, Herbert D. G.

Large-scale patterns of culture change may be explained by models of self organized criticality, or alternatively, by multiplicative processes. We speculate that popular album activity may be similar to critical models of extinction in that interconnected agents compete to survive within a limited space. Here we investigate whether popular music albums as listed on popular album charts display evidence of self-organized criticality, including a self-affine time series of activity and power-law distributions of lifetimes and exit activity in the chart. We find it difficult to distinguish between multiplicative growth and critical model hypotheses for these data. However, aspects of criticality may be masked by the selective sampling that a "Top 200" listing necessarily implies.

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

Solar energy system economic evaluation for IBM System 3, Glendo, Wyoming

NASA Technical Reports Server (NTRS)

1980-01-01

This analysis was based on the technical and economic models in f-chart design procedures with inputs based on the characteristics of the parameters of present worth of system cost over a projected twenty year life: life cycle savings, year of positive savings, and year of payback for the optimized solar energy system at each of the analysis sites. The sensitivity of the economic evaluation to uncertainties in constituent system and economic variables was also investigated.

Procedure and information displays in advanced nuclear control rooms: experimental evaluation of an integrated design.