A rock physics and seismic reservoir characterization study of the Rock Springs Uplift, a carbon dioxide sequestration site in Southwestern Wyoming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grana, Dario; Verma, Sumit; Pafeng, Josiane

We present a reservoir geophysics study, including rock physics modeling and seismic inversion, of a carbon dioxide sequestration site in Southwestern Wyoming, namely the Rock Springs Uplift, and build a petrophysical model for the potential injection reservoirs for carbon dioxide sequestration. Our objectives include the facies classification and the estimation of the spatial model of porosity and permeability for two sequestration targets of interest, the Madison Limestone and the Weber Sandstone. The available dataset includes a complete set of well logs at the location of the borehole available in the area, a set of 110 core samples, and a seismicmore » survey acquired in the area around the well. The proposed study includes a formation evaluation analysis and facies classification at the well location, the calibration of a rock physics model to link petrophysical properties and elastic attributes using well log data and core samples, the elastic inversion of the pre-stack seismic data, and the estimation of the reservoir model of facies, porosity and permeability conditioned by seismic inverted elastic attributes and well log data. In particular, the rock physics relations are facies-dependent and include granular media equations for clean and shaley sandstone, and inclusion models for the dolomitized limestone. The permeability model has been computed by applying a facies-dependent porosity-permeability relation calibrated using core sample measurements. Finally, the study shows that both formations show good storage capabilities. The Madison Limestone includes a homogeneous layer of high-porosity high-permeability dolomite; the Weber Sandstone is characterized by a lower average porosity but the layer is thicker than the Madison Limestone.« less

Sequence stratigraphic principles applied to the Miocene Hawthorn Group, west-central Florida

DOE Office of Scientific and Technical Information (OSTI.GOV)

Norton, V.L.; Randazzo, A.F.

1993-03-01

Sequence boundaries for the Miocene Hawthorn Group in the ROMP 20 drill core from Osprey, Sarasota County, FL were generally delineated by lithologic variations recognized from core slabs, thin section analysis, and geophysical logs. At least six depositional sequences representing third order sea level fluctuations were identified. Depositional environments were determined on the basis of the characteristic lithologic constituents including rip-up clasts, pellets, fossils, laminations, burrow, degree of induration, and grain sorting. The sequence boundaries appear to have formed when the rate of the eustatic fall exceeded basin subsidence rates producing a relative sea level fall at a depositional shorelinemore » break. As a result of the basinward facies shift associated with this sequence type, peritidal facies may directly overlie deeper water facies. Subaerial exposure and erosion can be expected. The sequence of facies representing progressively deeper water depositional environments, followed by a progressive shallowing, were present between bounding surfaces. Among the six sequences recognized, four were clearly delineated as representative of regression, subaerial exposure, and subsequent transgression. Two sequences were less clearly defined and probably represent transitional facies which had exposure surfaces developed. Comparison of the petrologically established sequence stratigraphy with published sea level curves resulted in a strong correlation between the number of sequences recognized and the number of coastal on-lap/off-lap cycles depicted for the early to middle Miocene. This correlation suggests that petrologic examination of core slabs, with supplemental thin section data, can provide useful information regarding the recognition of stratigraphic sequences and relative sea level fluctuations, particularly, in situations where seismic data may not be available.« less

A rock physics and seismic reservoir characterization study of the Rock Springs Uplift, a carbon dioxide sequestration site in Southwestern Wyoming

DOE PAGES

Grana, Dario; Verma, Sumit; Pafeng, Josiane; ...

2017-06-20

We present a reservoir geophysics study, including rock physics modeling and seismic inversion, of a carbon dioxide sequestration site in Southwestern Wyoming, namely the Rock Springs Uplift, and build a petrophysical model for the potential injection reservoirs for carbon dioxide sequestration. Our objectives include the facies classification and the estimation of the spatial model of porosity and permeability for two sequestration targets of interest, the Madison Limestone and the Weber Sandstone. The available dataset includes a complete set of well logs at the location of the borehole available in the area, a set of 110 core samples, and a seismicmore » survey acquired in the area around the well. The proposed study includes a formation evaluation analysis and facies classification at the well location, the calibration of a rock physics model to link petrophysical properties and elastic attributes using well log data and core samples, the elastic inversion of the pre-stack seismic data, and the estimation of the reservoir model of facies, porosity and permeability conditioned by seismic inverted elastic attributes and well log data. In particular, the rock physics relations are facies-dependent and include granular media equations for clean and shaley sandstone, and inclusion models for the dolomitized limestone. The permeability model has been computed by applying a facies-dependent porosity-permeability relation calibrated using core sample measurements. Finally, the study shows that both formations show good storage capabilities. The Madison Limestone includes a homogeneous layer of high-porosity high-permeability dolomite; the Weber Sandstone is characterized by a lower average porosity but the layer is thicker than the Madison Limestone.« less

Adaptive phase k-means algorithm for waveform classification

NASA Astrophysics Data System (ADS)

Song, Chengyun; Liu, Zhining; Wang, Yaojun; Xu, Feng; Li, Xingming; Hu, Guangmin

2018-01-01

Waveform classification is a powerful technique for seismic facies analysis that describes the heterogeneity and compartments within a reservoir. Horizon interpretation is a critical step in waveform classification. However, the horizon often produces inconsistent waveform phase, and thus results in an unsatisfied classification. To alleviate this problem, an adaptive phase waveform classification method called the adaptive phase k-means is introduced in this paper. Our method improves the traditional k-means algorithm using an adaptive phase distance for waveform similarity measure. The proposed distance is a measure with variable phases as it moves from sample to sample along the traces. Model traces are also updated with the best phase interference in the iterative process. Therefore, our method is robust to phase variations caused by the interpretation horizon. We tested the effectiveness of our algorithm by applying it to synthetic and real data. The satisfactory results reveal that the proposed method tolerates certain waveform phase variation and is a good tool for seismic facies analysis.

Attribute classification for generating GPR facies models

NASA Astrophysics Data System (ADS)

Tronicke, Jens; Allroggen, Niklas

2017-04-01

Ground-penetrating radar (GPR) is an established geophysical tool to explore near-surface sedimentary environments. It has been successfully used, for example, to reconstruct past depositional environments, to investigate sedimentary processes, to aid hydrogeological investigations, and to assist in hydrocarbon reservoir analog studies. Interpreting such 2D/3D GPR data, usually relies on concepts known as GPR facies analysis, in which GPR facies are defined as units composed of characteristic reflection patterns (in terms of reflection amplitude, continuity, geometry, and internal configuration). The resulting facies models are then interpreted in terms of depositional processes, sedimentary environments, litho-, and hydrofacies. Typically, such GPR facies analyses are implemented in a manual workflow being laborious and rather inefficient especially for 3D data sets. In addition, such a subjective strategy bears the potential of inconsistency because the outcome depends on the expertise and experience of the interpreter. In this presentation, we investigate the feasibility of delineating GPR facies in an objective and largely automated manner. Our proposed workflow relies on a three-step procedure. First, we calculate a variety of geometrical and physical attributes from processed 2D and 3D GPR data sets. Then, we analyze and evaluate this attribute data base (e.g., using statistical tools such as principal component analysis) to reduce its dimensionality and to avoid redundant information, respectively. Finally, we integrate the reduced data base using tools such as composite imaging, cluster analysis, and neural networks. Using field examples that have been acquired across different depositional environments, we demonstrate that the resulting 2D/3D facies models ease and improve the interpretation of GPR data. We conclude that our interpretation strategy allows to generate GPR facies models in a consistent and largely automated manner and might be helpful in variety near-surface applications.

High-Resolution Subsurface Imaging and Stratigraphy of Quaternary Deposits, Marapanim Estuary, Northern Brazil

NASA Astrophysics Data System (ADS)

Silva, C. A.; Souza Filho, P. M.; Gouvea Luiz, J.

2007-05-01

The Marapanim estuary is situated in the Para Coastal Plain, North Brazil. It is characterized by an embayed coastline developed on Neogene and Quaternary sediments of the Barreiras and Pos-Barreiras Group. This system is strongly influenced by macrotidal regimes with semidiurnal tides and by humid tropical climate conditions. The interpretation of GPR-reflections presented in this paper is based on correlation of the GPR signal with stratigraphic data acquired on the coastal plain through five cores that were taken along GPR survey lines from the recent deposits and outcrops observed along to the coastal area. The profiles were obtained using a Geophysical Survey Systems Inc., Model YR-2 GPR, with monostatic 700 MHz antenna that permitted to get records of subsurface deposits at 20m depth. Were collected 54 radar sections completing a total of 4.360m. The field data were analyzed using a RADAN software and applying different filters. The interpretation of radar facies following the principles of seismic stratigraphy that permitted analyze the sedimentary facies and facies architecture in order to understand the lithology, depositional environments and stratigraphic evolution of this sedimentary succession as well as to leading to a more precise stratigraphic framework for the Neogene to Quaternary deposits at Marapanim coastal plain. Facies characteristics and sedimentologic analysis (i.e., texture, composition and structure aspects) were investigated from five cores collected through a Rammkernsonde system. The locations were determined using a Global Positioning System. Remote sensing images (Landsat-7 ETM+ and RADARSAT-1 Wide) and SRTM elevation data were used to identify and define the distribution of the different morphologic units. The Coastal Plain extends west-east of the mouth of the Marapanim River, where were identified six morphologic units: paleodune, strand plain, recent coastal dune, macrotidal sandy beach, mangrove and salt marsh. The integration of GPR profiles and stratigraphy data allowed for the recognition of paleochannel geometry, with width of 150m and depth of 20m, developed on Barreiras Group, two discontinuity surfaces and three facies associations organized into sedimentary facies: (i) Tidal channel with mottled sand, Conglomerate with clay pebble and Ophiomorpha/linear Skolithos, channel-fill and tabular cross-bedding sand and sand/mud interlayer facies. (ii) Dune/interdune with wavy bedding and cross-bedding sand and planar bedding and tabular cross-bedding sand facies. (iii) infilled tidal channel with mottled sand, planar/flaser bedding sand, lenticular bedding clay and sand/mud interlayer facies. The present study demonstrates that some facies associations occur restricts to tidal paleochannels and shows features well preserved that are very important to reconstruction of the relative sea-level history in the Marapanim Estuary.

The effect of electromagnetic radiation of wireless connections on morphology of amniotic fluid

NASA Astrophysics Data System (ADS)

Novikov, Vsevolod O.; Titova, Natalia; Azarhov, Olexand; Wójcik, Waldemar; GrÄ dz, Å.»aklin; Mussabekova, Assel

2016-09-01

The article considers the effect of wireless networks on the morphology of amniotic fluid (AF) to demonstrate possible risks involving pregnant women. The analysis of AF thesiograms after exposure of the model fluid to Wi-Fi, 3G and β- radiation was chosen as the research method. A comparative analysis of facies structures is carried out, and depth maps of the facies structure are created. This comparative analysis permits an evaluation of the efficiency of morphological changes. It is shown that AF control facies differ in the concentration of areas with a narrow peripheral area and ellipsoidal formations of crystalloids in circumferences center. After exposure of different types of radiation onto AF, the facies structures collapse and form their own conglomerates. The obtained results show that the considered types of radiation have a negative effect on AF.

Stratigraphy, facies analysis and depositional environments of the Upper Unit of Abu Roash "E" member in the Abu Gharadig field, Western Desert, Egypt

NASA Astrophysics Data System (ADS)

Hewaidy, Abdel Galil; Elshahat, O. R.; Kamal, Samy

2018-03-01

Abu Roach "E" member is of an important hydrocarbon reservoir-producing horizon in the Abu Gharadig Field (north Western Desert, Egypt). This study is used to build facies analysis and depositional environments model for the Upper Unit of the Abu Roash "E" member in Abu Gharadig Field. This target has been achieved throughout the sedimentological, wire line logs, lithostratigraphic and biostratigraphic analyses of more than 528 feet cores. The high-resolution biostratigraphic analysis provides a calibration for the paleo-bathymetry and depositional environmental interpretations. Biozonation and lithostratigraphic markers are used to constrain stratigraphic correlation. Integration between the core description and petorographic microfacies analysis by microscope examination provide an excellent indication for the rock types and depositional environments. Five depositional facies types are detected including carbonate inner ramp, tidal flats, tidal channels, supra-tidal and tide dominated delta facies. This model helps in the understanding of the Upper Unit of Abu Roash "E" member reservoir distribution as well as lateral and vertical facies changes that contribute to the development strategy for the remaining hydrocarbon reserves for this important oil reservoir.

Predicted facies, sedimentary structures and potential resources of Jurassic petroleum complex in S-E sWestern Siberia (based on well logging data)

NASA Astrophysics Data System (ADS)

Prakojo, F.; Lobova, G.; Abramova, R.

2015-11-01

This paper is devoted to the current problem in petroleum geology and geophysics- prediction of facies sediments for further evaluation of productive layers. Applying the acoustic method and the characterizing sedimentary structure for each coastal-marine-delta type was determined. The summary of sedimentary structure characteristics and reservoir properties (porosity and permeability) of typical facies were described. Logging models SP, EL and GR (configuration, curve range) in interpreting geophysical data for each litho-facies were identified. According to geophysical characteristics these sediments can be classified as coastal-marine-delta. Prediction models for potential Jurassic oil-gas bearing complexes (horizon J11) in one S-E Western Siberian deposit were conducted. Comparing forecasting to actual testing data of layer J11 showed that the prediction is about 85%.

Facies Interpretation and the Stratigraphic Record

NASA Astrophysics Data System (ADS)

Cisne, John

This book is a short, readable, and interesting introduction to facies analysis—or as Hallam prefers to call it, facies interpretation—in the form of an advanced undergraduate to beginning graduate level textbook. Unlike conventional textbooks on the subject, the emphasis here is not so much on the basics of sedimentation and stratigraphy as on applying the basics to sweeping, large-scale problems in tectonics, paleo-oceanography, paleoclimatology, and the history of life. This is not a comprehensive textbook. One must know the basics to appreciate it fully. But its very brevity and portability combine with its extensive bibliography to make it a particularly useful guide to recent work.

Facies analysis, depositional environments and paleoclimate of the Cretaceous Bima Formation in the Gongola Sub - Basin, Northern Benue Trough, NE Nigeria

NASA Astrophysics Data System (ADS)

Shettima, B.; Abubakar, M. B.; Kuku, A.; Haruna, A. I.

2018-01-01

Facies analysis of the Cretaceous Bima Formation in the Gongola Sub -basin of the Northern Benue Trough northeastern Nigeria indicated that the Lower Bima Member is composed of alluvial fan and braided river facies associations. The alluvial fan depositional environment dominantly consists of debris flow facies that commonly occur as matrix supported conglomerate. This facies is locally associated with grain supported conglomerate and mudstone facies, representing sieve channel and mud flow deposits respectively, and these deposits may account for the proximal alluvial fan region of the Lower Bima Member. The distal fan facies were represented by gravel-bed braided river system of probably Scot - type model. This grade into sandy braided river systems with well developed floodplains facies, forming probably at the lowermost portion of the alluvial fan depositional gradient, where it inter-fingers with basinal facies. In the Middle Bima Member, the facies architecture is dominantly suggestive of deep perennial sand-bed braided river system with thickly developed amalgamated trough crossbedded sandstone facies fining to mudstone. Couplets of shallow channels are also locally common, attesting to the varying topography of the basin. The Upper Bima Member is characterized by shallow perennial sand-bed braided river system composed of successive succession of planar and trough crossbedded sandstone facies associations, and shallower channels of the flashy ephemeral sheetflood sand - bed river systems defined by interbedded succession of small scale trough crossbedded sandstone facies and parallel laminated sandstone facies. The overall stacking pattern of the facies succession of the Bima Formation in the Gongola Sub - basin is generally thinning and fining upwards cycles, indicating scarp retreat and deposition in a relatively passive margin setting. Dominance of kaolinite in the clay mineral fraction of the Bima Formation points to predominance of humid sub - tropical to tropical climatic conditions. This favors pedogenic activities which are manifested in the several occurrences of paleosols. Pronounced periods of arid climatic conditions are also notable from the subordinate smectite mineralization. Chlorite mineralization at some localities is indicative of elevation of the provenance area, and this is synonymous with deposition of the Bima Formation, because of its syn - depositional tectonics. The absences of lacustrine shales in the syn - rift stratigraphic architecture of the Bima Formation indicates that the lower Cretaceous petroleum system that are common in the West and Central African Rift basins are generally barren in the Gongola Sub - basin of the Northern Benue Trough.

Process sedimentology of submarine fan deposits - new perspectives

NASA Astrophysics Data System (ADS)

Postma, George

2017-04-01

To link submarine fan process sedimentology with sand distribution, sand body architecture, texture and fabric, the field geologist studies sedimentary facies, facies associations (fan elements) and stratigraphy. Facies analysis resides on factual knowledge of modern fan morphodynamics and physical modelling of en-masse sediment transport. Where do we stand after 55 years of submarine research, i.e. the date when the first submarine fan model was launched by Arnold Bouma in 1962? Since that date students of submarine fans have worked on a number of important, recurring questions concerned with facies analysis of submarine successions in outcrop and core: 1. What type of sediment transport produced the beds? 2. What facies can be related to initial flow conditions? 3. What is the significance of grain size jumps and bounding surface hierarchy in beds consisting of crude and spaced stratification (traction carpets)? Do these point to multi flow events or to flow pulsations by one and the same event? 4. What facies associations relate to the basic elements of submarine fans? 5. What are the autogenic and allogenic signatures in submarine fans? Particularly in the last decade, the enormous technical advancement helped to obtain high-quality data from observations of density flows in modern canyons, deep basins and deep-water delta slopes (refs 1,2,3). In combination with both physical (refs 4,5) and numerical modelling (ref 6) these studies broke new ground into our understanding of density flow processes in various submarine environments and have led to new concepts of submarine fan building by super- and subcritical high-density flow (ref 7). Do these new concepts provide better answers to our recurrent questions related to the morphodynamics of submarine fans and prediction of sand body architecture? In discussing this open question, I shall 1. apply the new concepts to a modern and ancient example of a channel-lobe-transition-zone (ref 8); 2. raise the problem of recognizing time in turbidite beds and sequences; 3. discuss consequences for the Bouma facies model and suggest an alternative model Uncertainties in facies analysis remain and clear understanding of submarine fan morphodynamics awaits further monitoring of the modern fan environments and new modelling studies (ref 9). References 1. Fildani, A. Normark, W.R., Kostic, S., and Parker, G., 2006. Sedimentology, 53, 1265-1287. 2. Paull, C.K., Ussler, W., Caress, D.W., Lundsten, E., Covault, J.A., Maier, K.L., Xu, J., and Augenstein, S., 2010. Geosphere, 6, 755-774. 3. Hughes Clarke, J. E., 2016. Nature Communications 7:11896 4. Spinewine, B., Sequeiros, O.E., Garcia, M.H., Beaubouef, R.T., Sun, T., and Savoye, B., 2009. J of Sediment Research, v. 79, 608-628. 5. Hoyal, D. C. J. D., and B. A. Sheets (2009) The 33rd International Association of Hydraulic Research Congress. 6. Kostic, S., 2011. Geosphere, 7, 294-304. 7. Postma, G. and Cartigny, M., 2014. Geology, 42, 987-990. 8. Postma G, et al. , 2016, In: Lamarche G, Mountjoy J (eds) Submarine mass movements and their consequences. Springer, Dordrecht, pp 469-478. 9. Talling, P.J., et al. ., 2015. Journal of Sedimentary Research, 85, 153-169.

Facies analysis and depositional environments of upper part of Richmond group (upper Ordovician), Richmond, Indiana, to Xenia, Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Betz, C.E.; Martin, W.D.

Rock sections of the Drakes, Elkhorn, and Whitewater Formations were studied along an east-west-trending line in order to distinguish facies changes in a slope direction across the paleodepositional basin. The Richmond limestones, shales, and dolostones formed from fine-grained, terrigenous and carbonate sediments deposited on a shallow marine ramp within the humid, tropical, low latitudes of the Southern Hemisphere. Depositional environments on the ramp are represented by five main facies type. The five Richmond facies form a subtidal to supratidal shallowing-upward sequence. This progressive shallowing during the Late Ordovician resulted from the westward regional progradation of Queenston deltaic facies.

Facies analysis, palaeoenvironmental reconstruction and stratigraphic development of the Early Cretaceous sediments (Lower Bima Member) in the Yola Sub-basin, Northern Benue Trough, NE Nigeria

NASA Astrophysics Data System (ADS)

Sarki Yandoka, Babangida M.; Abubakar, M. B.; Abdullah, Wan Hasiah; Amir Hassan, M. H.; Adamu, Bappah U.; Jitong, John S.; Aliyu, Abdulkarim H.; Adegoke, Adebanji Kayode

2014-08-01

The Benue Trough of Nigeria is a major rift basin formed from the tension generated by the separation of African and South American plates in the Early Cretaceous. It is geographically sub-divided into Southern, Central and Northern Benue portions. The Northern Benue Trough comprises two sub-basins; the N-S trending Gongola Sub-basin and the E-W trending Yola Sub-basin. The Bima Formation is the oldest lithogenetic unit occupying the base of the Cretaceous successions in the Northern Benue Trough. It is differentiated into three members; the Lower Bima (B1), the Middle Bima (B2) and the Upper Bima (B3). Facies and their stratigraphical distribution analyses were conducted on the Lower Bima Member exposed mainly at the core of the NE-SW axially trending Lamurde Anticline in the Yola Sub-basin, with an objective to interpret the paleodepositional environments, and to reconstruct the depositional model and the stratigraphical architecture. Ten (10) lithofacies were identified on the basis of lithology, grain size, sedimentary structures and paleocurrent analysis. The facies constitute three (3) major facies associations; the gravelly dominated, the sandy dominated and the fine grain dominated. These facies and facies associations were interpreted and three facies successions were recognized; the alluvial-proximal braided river, the braided river and the lacustrine-marginal lacustrine. The stratigraphic architecture indicates a rifted (?pull-apart) origin as the facies distribution shows a progradational succession from a shallow lacustrine/marginal lacustrine (at the axial part of the basin) to alluvial fan (sediment gravity flow)-proximal braided river (gravel bed braided river) and braided river (channel and overbank) depositional systems. The facies stacking patterns depict sedimentation mainly controlled by allogenic factors of climate and tectonism.

Facies Analysis of the Tandoǧdu Travertines, Van, Eastern Anatolia, Turkey: implications for the active tectonic deformation behind the formation and evolution of the travertines

NASA Astrophysics Data System (ADS)

Yesilova, Cetin; Yesilova, Pelin; Aclan, Mustafa; Gülyüz, Nilay

2017-04-01

In this study, stratigraphic and sedimentologic characteristics of Tandoǧdu travertines exposing at the 13 km southwest of Başkale, Van were examined. In this respect, we shed light on their formation conditions and depositional environment by determining their morphological characteristics and analyzing their facies distribution. In addition, kinematic studies were conducted by collecting structural data from the structures hosting the travertines. Tandoǧdu travertines having bed type and ridge type travertines have 5 distinct lithofacies based on the studies conducted. These are: (1) crystalline crust facies, (2) coated bubble facies, (3) paper-thin raft type facies, (4) lithoclast - breccia facies and (5) paleosoil facies. According to the examination of their morphologies and lithofacies; lithofacies were developed depending on the temperature of fluids forming the travertines. Distal from the source field of the hydrothermal fluids, paper-thin raft type facies were developed in shallow pools. Proximal to the source field of the hydrothermal fluids, crystalline crust facies and coated bubble facies were deposited. Existence of breccia facies indicates the effects of active tectonism during the formation of travertines. Hot hydrothermal pools on the ridge type travertines prove the still active tectonic activities. On-going studies aim to date growth of the travertines by U-Th dating method which will also shed some light on the tectonic scenario behind the evolution of the travertines.

Sedimentary Petrography and Facies Analysis at the Shaler Outcrop, Gale Crater, Mars

NASA Astrophysics Data System (ADS)

Edgar, L. A.; Gupta, S.; Rubin, D. M.; Lewis, K. W.; Kocurek, G.; Anderson, R. B.; Bell, J. F.; Dromart, G.; Edgett, K. S.; Grotzinger, J. P.; Hardgrove, C. J.; Kah, L. C.; Leveille, R. J.; Malin, M.; Mangold, N.; Milliken, R.; Minitti, M. E.; Rice, M. S.; Rowland, S. K.; Schieber, J.; Stack, K.; Sumner, D. Y.; Team, M.

2013-12-01

The Mars Science Laboratory Curiosity rover has recently completed an investigation of a large fluvial deposit known informally as the Shaler outcrop (~1 m thick). Curiosity acquired data at the Shaler outcrop during sols 120-121 and 309-324. The Shaler outcrop is comprised of cross-bedded coarse-grained sandstones and recessive finer-grained intervals. Shaler is distinguished from the surrounding units by the presence of resistant beds exhibiting decimeter scale trough cross-bedding. Observations using the Mast Cameras, Mars Hand Lens Imager (MAHLI) and ChemCam Remote Micro Imager (RMI) enable the recognition of several distinct facies. MAHLI images were acquired on five distinct rock targets, and RMI images were acquired at 33 different locations. On the basis of grain size, erosional resistance, color, and sedimentary structures, we identify four facies: 1) resistant cross-stratified facies, 2) smooth, fine-grained cross-stratified facies, 3) dark gray, pitted facies, and 4) recessive, vertically fractured facies. Panoramic Mastcam observations reveal facies distributions and associations, and show cross-bedded facies that are similar to those observed at the Rocknest and Bathurst_Inlet locations. MAHLI and RMI images are used to determine the grain size, sorting, rounding and sedimentary fabric of the different facies. High-resolution images also reveal small-scale diagenetic features and sedimentary structures that are used to reconstruct the depositional and diagenetic history.

Seismic facies analysis based on self-organizing map and empirical mode decomposition

NASA Astrophysics Data System (ADS)

Du, Hao-kun; Cao, Jun-xing; Xue, Ya-juan; Wang, Xing-jian

2015-01-01

Seismic facies analysis plays an important role in seismic interpretation and reservoir model building by offering an effective way to identify the changes in geofacies inter wells. The selections of input seismic attributes and their time window have an obvious effect on the validity of classification and require iterative experimentation and prior knowledge. In general, it is sensitive to noise when waveform serves as the input data to cluster analysis, especially with a narrow window. To conquer this limitation, the Empirical Mode Decomposition (EMD) method is introduced into waveform classification based on SOM. We first de-noise the seismic data using EMD and then cluster the data using 1D grid SOM. The main advantages of this method are resolution enhancement and noise reduction. 3D seismic data from the western Sichuan basin, China, are collected for validation. The application results show that seismic facies analysis can be improved and better help the interpretation. The powerful tolerance for noise makes the proposed method to be a better seismic facies analysis tool than classical 1D grid SOM method, especially for waveform cluster with a narrow window.

New interpretation of the Gran Dolina-TD6 bearing Homo antecessor deposits through sedimentological analysis

PubMed Central

Campaña, I.; Pérez-González, A.; Benito-Calvo, A.; Rosell, J.; Blasco, R.; de Castro, J. M. Bermúdez; Carbonell, E.; Arsuaga, J. L.

2016-01-01

Gran Dolina is a cavity infilled by at least 25 m of Pleistocene sediments. This sequence contains the TD6 stratigraphic unit, whose records include around 170 hominin bones that have allowed the definition of a new species, Homo antecessor. This fossil accumulation was studied as a single assemblage and interpreted as a succession of several human home bases. We propose a complete stratigraphic context and sedimentological interpretation for TD6, analyzing the relationships between the sedimentary facies, the clasts and archaeo-palaeontological remains. The TD6 unit has been divided into three sub-units and 13 layers. Nine sedimentary facies have been defined. Hominin remains appear related to three different sedimentary facies: debris flow facies, channel facies and floodplain facies. They show three kinds of distribution: first a group of scattered fossils, then a group with layers of fossils in fluvial facies, and third a group with a layer of fossils in mixed fluvial and gravity flow facies. The results of this work suggest that some of these hominin remains accumulated in the cave by geological processes, coming from the adjacent slope above the cave or the cave entry, as the palaeogeography and sedimentary characteristics of these allochthonous facies suggest. PMID:27713562

Quantification of Reflection Patterns in Ground-Penetrating Radar Data

NASA Astrophysics Data System (ADS)

Moysey, S.; Knight, R. J.; Jol, H. M.; Allen-King, R. M.; Gaylord, D. R.

2005-12-01

Radar facies analysis provides a way of interpreting the large-scale structure of the subsurface from ground-penetrating radar (GPR) data. Radar facies are often distinguished from each other by the presence of patterns, such as flat-lying, dipping, or chaotic reflections, in different regions of a radar image. When these patterns can be associated with radar facies in a repeated and predictable manner we refer to them as `radar textures'. While it is often possible to qualitatively differentiate between radar textures visually, pattern recognition tools, like neural networks, require a quantitative measure to discriminate between them. We investigate whether currently available tools, such as instantaneous attributes or metrics adapted from standard texture analysis techniques, can be used to improve the classification of radar facies. To this end, we use a neural network to perform cross-validation tests that assess the efficacy of different textural measures for classifying radar facies in GPR data collected from the William River delta, Saskatchewan, Canada. We found that the highest classification accuracies (>93%) were obtained for measures of texture that preserve information about the spatial arrangement of reflections in the radar image, e.g., spatial covariance. Lower accuracy (87%) was obtained for classifications based directly on windows of amplitude data extracted from the radar image. Measures that did not account for the spatial arrangement of reflections in the image, e.g., instantaneous attributes and amplitude variance, yielded classification accuracies of less than 65%. Optimal classifications were obtained for textural measures that extracted sufficient information from the radar data to discriminate between radar facies but were insensitive to other facies specific characteristics. For example, the rotationally invariant Fourier-Mellin transform delivered better classification results than the spatial covariance because dip angle of the reflections, but not dip direction, was an important discriminator between radar facies at the William River delta. To extend the use of radar texture beyond the identification of radar facies to sedimentary facies we are investigating how sedimentary features are encoded in GPR data at Borden, Ontario, Canada. At this site, we have collected extensive sedimentary and hydrologic data over the area imaged by GPR. Analysis of this data coupled with synthetic modeling of the radar signal has allowed us to develop insight into the generation of radar texture in complex geologic environments.

Sequence Stratigraphic Analysis and Facies Architecture of the Cretaceous Mancos Shale on and Near the Jicarilla Apache Indian Reservation, New Mexico-their relation to Sites of Oil Accumulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ridgley, Jennie

2001-08-21

The purpose of phase 1 and phase 2 of the Department of Energy funded project Analysis of oil- bearing Cretaceous Sandstone Hydrocarbon Reservoirs, exclusive of the Dakota Sandstone, on the Jicarilla Apache Indian Reservation, New Mexico was to define the facies of the oil producing units within the Mancos Shale and interpret the depositional environments of these facies within a sequence stratigraphic context. The focus of this report will center on (1) redefinition of the area and vertical extent of the ''Gallup sandstone'' or El Vado Sandstone Member of the Mancos Shale, (2) determination of the facies distribution within themore » ''Gallup sandstone'' and other oil-producing sandstones within the lower Mancos, placing these facies within the overall depositional history of the San Juan Basin, (3) application of the principals of sequence stratigraphy to the depositional units that comprise the Mancos Shale, and (4) evaluation of the structural features on the Reservation as they may control sites of oil accumulation.« less

The Role of the Sedimentary Regime in Shaping the Distribution of Subtidal Sandbank Environments and the Associated Meiofaunal Nematode Communities: An Example from the Southern North Sea

PubMed Central

Schratzberger, Michaela; Larcombe, Piers

2014-01-01

We combined sediment and faunal data to explore the role of the sedimentary regime in shaping the distribution of subtidal sandbank environments and the associated meiofaunal nematode communities at Broken Bank and Swarte Bank, in the southern North Sea. A variety of sediment transport processes occur in the area, differing in the frequency and magnitude of sediment mobility, and the continuum between erosion, translation and sediment accumulation. The seabed contained a variety of bedforms, including longitudinal furrows, and small to very large sandwaves. The bed sediments were dominated by fine and medium sands, with admixtures of silt and gravel. Based on sedimentary bedforms and grain size analysis, a total of 11 sedimentary facies were delineated, of which 8 were analysed in detail for their relationships with the meiofauna. The sedimentary facies fell clearly into groups of facies, respectively representing high, high-moderate and moderate, and episodic sediment mobility. For those sedimentary facies where daily movement of sediments and bedforms occurred (‘high’ sediment mobility), the resulting spatially homogeneous environments were dominated by an impoverished nematode community comprising small deposit feeders and large predators. Resistance to sediment movement and the ability to exploit alternative food sources were prominent functional features of the successful colonisers. Those facies characterised by relatively infrequent sediment mobility (‘episodic’ and ‘high-moderate and moderate’ sediment mobility) comprised a heterogeneous suite of benthic habitats, containing taxonomically and functionally diverse assemblages of nematodes of various sizes, feeding types and reproductive potential. Faunal distribution patterns here indicated trade-offs between the resistance to sediment movement, environmental tolerance and competitive abilities. Our focus on diverse assemblages of organisms with high turnover times, inhabiting highly dynamic sedimentary environments, has revealed new animal-sediment relationships of relevance to pure and applied science. PMID:25296029

Channel characterization using multiple-point geostatistics, neural network, and modern analogy: A case study from a carbonate reservoir, southwest Iran

NASA Astrophysics Data System (ADS)

Hashemi, Seyyedhossein; Javaherian, Abdolrahim; Ataee-pour, Majid; Tahmasebi, Pejman; Khoshdel, Hossein

2014-12-01

In facies modeling, the ideal objective is to integrate different sources of data to generate a model that has the highest consistency to reality with respect to geological shapes and their facies architectures. Multiple-point (geo)statistics (MPS) is a tool that gives the opportunity of reaching this goal via defining a training image (TI). A facies modeling workflow was conducted on a carbonate reservoir located southwest Iran. Through a sequence stratigraphic correlation among the wells, it was revealed that the interval under a modeling process was deposited in a tidal flat environment. Bahamas tidal flat environment which is one of the most well studied modern carbonate tidal flats was considered to be the source of required information for modeling a TI. In parallel, a neural network probability cube was generated based on a set of attributes derived from 3D seismic cube to be applied into the MPS algorithm as a soft conditioning data. Moreover, extracted channel bodies and drilled well log facies came to the modeling as hard data. Combination of these constraints resulted to a facies model which was greatly consistent to the geological scenarios. This study showed how analogy of modern occurrences can be set as the foundation for generating a training image. Channel morphology and facies types currently being deposited, which are crucial for modeling a training image, was inferred from modern occurrences. However, there were some practical considerations concerning the MPS algorithm used for facies simulation. The main limitation was the huge amount of RAM and CPU-time needed to perform simulations.

Facies development and paleoenvironment of the Hajajah Limestone Member, Aruma Formation, central Saudi Arabia

NASA Astrophysics Data System (ADS)

El-Sorogy, Abdelbaset S.; Ismail, Abdelmoneim; Youssef, Mohamed; Nour, Hamdy

2016-12-01

The Campanian Hajajah Limestone Member of the Aruma Formation was formed during two regressive episodes. Each of them formed of three depositional facies, from base to top: 1) intra-shelf basin facies, made up of fossiliferous green shale and mudstone with ostracods and badly preserved foraminifers. 2) fore-reef facies, consists of hard, massive, marly coralline limestone. The upper part is rich with low divers, badly to moderate preserved, solitary and colonial corals, and, 3) back reef and near-shore facies, consists of fossiliferous sandy dolomitized, bioturbated limestone with abundant reworked corals, bivalves, gastropods, and aggregate grains. On the basis of field observations, micro-and macrofossils and microfacies analysis, the Hajajah Limestone Member was deposited in distal marine settings below storm wave base in a low-energy environment changed upward to fore-reef framework in an open marine environment with moderate to high energy conditions and terminated with shallow marine facies with accumulation of skeletal grains by storms during regression.

Tectonic implications of facies patterns, Lower Permian Dry Mountain trough, east-central Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gallegos, D.M.; Snyder, W.S.; Spinosa, C.

1991-02-01

Paleozoic tectonism is indicated by a study of a west-east facies analysis transect across the northern portion of the Lower Permian Dry Mountain trough (DMT). In an attempt to characterize the Early Permian basin-filling sequences, three broadly recognizable facies packages have been identified across the DMT: the western margin facies and the central basin facies of the DMT and an eastern shelf facies. In the western margin facies of the basin, pulses of tectonic activity are recorded at McCloud Spring in the Sulphur Springs Range. Here, shallow open-marine carbonate overlies eroded Vinini Formation and, in turn, is unconformably overlain bymore » basinal marine carbonate. An unconformity also marks the contact with the overriding prograding coarse clastic facies. These abrupt transitions suggest the sediments were deposited in a tectonically active area where they preservation of Waltherian sequences is unlikely to occur. Similarly abrupt transitions are evident in the western part of the central basin facies. At Portuguese Springs n the Diamond Range, a thin basal marine conglomerate delineates Lower Permian sedimentation over the Pennsylvanian Ely Formation. Coarsening-upward basinal carbonate strata of pelagic, hemipelagic, and turbidite components overlie the basal conglomerate. this progression of sediments is unconformably overlain by a subaerial sequence of coarse clastic deposits. Within the eastern part of the central basin facies in the Maverick Spring Range, the Lower Permian sediments are open-marine siltstone, wackestone, packstone, and grainstone. The sediments are assigned to a gradually sloping ramp, indicating the effects of tectonism on this margin of the basin were subdued.« less

Sedimentary facies and Holocene depositional processes of Laura Island, Majuro Atoll

NASA Astrophysics Data System (ADS)

Yasukochi, Toru; Kayanne, Hajime; Yamaguchi, Toru; Yamano, Hiroya

2014-10-01

The depositional processes that formed Laura Island, Majuro Atoll, Marshall Islands, were reconstructed based on a facies analysis of island sediments and spine ratios, and radiocarbon ages of foraminifera. Sedimentary facies were analyzed from trenches and drill cores excavated on the island and its adjacent reef flat. Depositional ages were obtained using benthic foraminifera (Calcarina) whose spines had not been abraded. The facies were classified into two types: gravelly and sandy. The initial sediments of these sites consisted of gravelly facies in the lower horizon and sandy facies in the upper horizon. Their ages were approximately 2000 cal BP and coincident with the onset of a 1.1-m decline in regional relative sea level, which enabled deposition of the gravelly facies. Half of the sand fraction of the sediment was composed of larger benthic foraminifera. The spine ratio showed that their supply source on the reef flat was located oceanside of the island. The supply source appears to have been caused by the relative sea-level fall. This indicates that the studied island was formed by a relative reduction in wave energy and enhanced foraminiferal supply, both of which were triggered by the late Holocene relative sea-level fall.

Facies analysis of tuffaceous volcaniclastics and felsic volcanics of Tadpatri Formation, Cuddapah basin, Andhra Pradesh, India

NASA Astrophysics Data System (ADS)

Goswami, Sukanta; Dey, Sukanta

2018-05-01

The felsic volcanics, tuff and volcaniclastic rocks within the Tadpatri Formation of Proterozoic Cuddapah basin are not extensively studied so far. It is necessary to evaluate the extrusive environment of felsic lavas with associated ash fall tuffs and define the resedimented volcaniclastic components. The spatial and temporal bimodal association were addressed, but geochemical and petrographic studies of mafic volcanics are paid more attention so far. The limited exposures of eroded felsic volcanics and tuffaceous volcaniclastic components in this terrain are highly altered and that is the challenge of the present facies analysis. Based on field observation and mapping of different lithounits a number of facies are categorized. Unbiased lithogeochemical sampling have provided major and selective trace element data to characterize facies types. Thin-section studies are also carried out to interpret different syn- and post- volcanic features. The facies analysis are used to prepare a representative facies model to visualize the entire phenomenon with reference to the basin evolution. Different devitrification features and other textural as well as structural attributes typical of flow, surge and ash fall deposits are manifested in the middle, lower and upper stratigraphic levels. Spatial and temporal correlation of lithologs are also supportive of bimodal volcanism. Felsic and mafic lavas are interpreted to have erupted through the N-S trending rift-associated fissures due to lithospheric stretching during late Palaeoproterozoic. It is also established from the facies model that the volcaniclastics were deposited in the deeper part of the basin in the east. The rifting and associated pressure release must have provided suitable condition of decompression melting at shallow depth with high geothermal gradient and this partial melting of mantle derived material at lower crust must have produced mafic magmas. Such upwelling into cold crust also caused partial heat transfer and associated melting of the surrounding shallow crustal rocks to generate felsic magmas.

Analysis on the overpressure characterization with respect to depositional environment facies: Case Study in Miri Area, Baram Delta

NASA Astrophysics Data System (ADS)

Mhd Hanapiah, N.; Yusoff, W. I. Wan; Zakariah, M. N. A.

2017-10-01

Overpressure studies in oil and gas exploration and production are carried out in order to mitigate any losses that could happen while drilling. These concerns can be addressed by enhancing the understanding of overpressure characterization in the fields. This research emphasizes in determining the pore pressure trend in Miri area to assist pore pressure prediction for future hydrocarbon exploration and production. Generally, pore pressure trends are related to mechanisms that contribute to the overpressure generation. In the region predominant overpressure are disequilibrium compaction within the prodelta shales meanwhile in outer shelf overpressure generation controlled by fluid expansion in deltaic sequence of inner shelf area. The objective of this research is to analyze the pore pressure profile of wells for determining vertical trends of pore pressure for various depositional environment facies of Miri area. Integration of rock physics and pore pressure analysis and relating the trends to environment depositional environment facies within shale underlying sand interval. Analysis done shows that overpressure top is characterize by depositional environment facies within shale underlying sand interval.

Integrating bio-, chemo- and sequence stratigraphy of the Late Ordovician, Early Katian: A connection between onshore and offshore facies using carbon isotope analysis: Kentucky, Ohio, USA

NASA Astrophysics Data System (ADS)

Young, Allison; Brett, Carlton; McLaughlin, Patrick

2017-04-01

A common problem in stratigraphic correlation is the difficulty of bridging shallow water shelf carbonates and down ramp shale-rich facies. This issue is well exemplified by the Upper Ordovician (lower Katian) Lexington Limestone of Kentucky, USA and adjacent dark shale facies in the deeper water Sebree Trough, an elongate, narrow bathymetric low abruptly north of the outcrop belt in the Ohio subsurface. Chronostratigraphic schemes for this interval have been proposed on the basis of conodont and graptolite biostratigraphy, mapping of event beds, and sequence stratigraphy through facies analysis. The relation of the siliciclastic rich offshore records of the "Point Pleasant-Utica" interval, well known to drillers because of its oil and gas potential, with the up-ramp shallow water carbonate dominated equivalents of the Lexington Formation is complicated by convoluted nomenclature, a major, abrupt change in facies, and disparity in the availability and completeness of records. Current genetic models of organic rich shale intervals, such as the Point Pleasant-Utica interval, are still lacking in detail, and will greatly benefit from detailed correlation with shallow water settings where more is understood about paleoclimatic conditions. In order to understand the development and evolution of this Late Ordovician Laurentian basin, it is important to understand the age relationships of depositional processes occurring at a range of depths, particularly in the less well studied epeiric sea setting of the "Point Pleasant-Utica" interval of Ohio and partial lateral equivalent, Lexington Formation of central Kentucky. The outcrop area of central Kentucky, exposed by the later uplift of the Cincinnati Arch, hosts numerous world-class exposures of the Lexington Formation, nearly all of which are representative of the highly fossiliferous, shallow-water marine platform carbonates. These successions display well differentiated depositional sequences, with sharp facies offsets, and mineralized surfaces. They also contain well studied fossil assemblages and event beds, which at the scale of an outcrop, allow for detailed paleoenvironmental interpretation. The offshore record of this interval, known almost exclusively from a few drill cores, displays an abrupt transition to distal, siliciclastic dominated facies, recording a more dysoxic and organic rich interval. Internal correlation of these shales has relied mostly on limited graptolite biostratigraphic and geochemical analysis. Here we seek to establish age relationships across a major facies transition between these two interrelated paleoenvironmental settings using high resolution whole rock carbon isotope analysis to integrate new and previous work on lithostratigraphy, biostratigraphy, and sequence stratigraphy of a series of cores and outcrops. Results to date demonstrate the persistence of carbon isotopic patterns (including the globally recognized GICE positive carbon isotopic excursion) permitting extension of correlation into basinal facies where tracking of stratigraphic sequences becomes difficult. A complicated relationship across the region is emerging involving both rapid facies transitions and submarine erosional cutout of units toward the center of the Sebree Trough. This study demonstrates the utility of an integrated stratigraphic approach for establishing high resolution regional correlations allowing for interpretations across a major facies transitions.

Depositional and erosional architectures of gravelly braid bar formed by a flood in the Abe River, central Japan, inferred from a three-dimensional ground-penetrating radar analysis

NASA Astrophysics Data System (ADS)

Okazaki, Hiroko; Kwak, Youngjoo; Tamura, Toru

2015-07-01

We conducted a ground-penetrating radar (GPR) survey of gravelly braid bars in the Abe River, central Japan, to clarify the three-dimensional (3D) variations in their depositional facies under various geomorphologic conditions. In September 2011, a ten-year return-period flood in the study area reworked and deposited braid bars. After the flood, we surveyed three bars with different geomorphologies using a GPR system with a 250-MHz antenna and identified seven fundamental radar depositional facies: Inclined reflections (facies Ia and Ib), horizontal to subhorizontal reflections (facies IIa and IIb), discontinuous reflections (facies IIIa and IIIb), and facies assemblage with a large-scale channel-shaped lower boundary (facies IV). Combinations of these facies indicate bar formation processes: channel filling, lateral aggradation, and lateral and downstream accretion. In the Abe River, aerial photographs and airborne laser scanning data were obtained before and after the flood. The observed changes of the surface topography are consistent with the subsurface results seen in the GPR sections. This study demonstrated that the erosional and depositional architecture observed among bars with different channel styles was related to river width and represented depositional processes for high-sediment discharge. The quantitative characterizations of the sedimentary architecture will be useful for interpreting gravelly fluvial deposits in the rock record.

Sedimentary Facies of the West Crocker Formation North Kota Kinabalu-Tuaran Area, Sabah, Malaysia

NASA Astrophysics Data System (ADS)

Mohamed, Azfar; Hadi Abd Rahman, Abdul; Suhaili Ismail, Mohd

2016-02-01

Newly outcrops exposed in the West Crocker Formation have led to the detail sedimentolgical analysis of the formation. Eight sedimentary facies have been recognised in which it was divided into three main groups: (1) sand-dominated facies (F1-F2), (2) poorly- sorted unit mixed sand and mud-dominated facies (F3), and (3) mud-dominated facies (F4-F5). These are: F1- graded sandstone (massive to planar laminated), F2-ripple-cross laminated, wavy and convolute lamination sandstone, F3-chaotic beds of mixed sandstone and mudstone blocks and clasts, F4-lenticular bedded of sandstone, and F5-shale. The studies of the formation has come out that it was deposited in a sand-rich submarine fan with specific location located at (1) inner fan channel-levee complex; (2) mid-fan channelised lobes, and (3) outer fan.

Identification of crude oil source facies in Railroad Valley, Nevada, using multivariate analysis of crude oil and hydrous pyrolysis data from the Meridian Spencer Federal 32-29 well

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conlan, L.M.; Francis, R.D.

Comparison of biological markers of a hydrous pyrolyzate of Mississippian-Chainman Shale from the Meridian Spencer Federal 32-29 well with two crude oils produced from the same well and crude oils produced from Trap Springs, Grant Canyon, Bacon Flats, and Eagle Springs fields indicate the possibility of three distinct crude oil source facies within Railroad Valley, Nevada. The two crude oil samples produced in the Meridian Spencer Federal 32-29 well are from the Eocene Sheep Pass Formation (MSF-SP) at 10,570 ft and the Joana Limestone (MSF-J) at 13,943 ft; the pyrolyzate is from the Chainman Shale at 10,700 ft. The Chainmanmore » Shale pyrolyzate has a similar composition to oils produced in Trap Springs and Grant Canyon fields. Applying multivariate statistical analysis to biological marker data shows that the Chainman Shale is a possible source for oil produced at Trap Springs because of the similarities between Trap Springs oils and the Chainman Shale pyrolyzate. It is also apparent that MSF-SP and oils produced in the Eagle Springs field have been generated from a different source (probably the Sheep Pass Formation) because of the presence of gammacerane (C{sub 30}). MSF-J and Bacon Flats appear to be either sourced from a pre-Mississippian unit or from a different facies within the Chainman Shale because of the apparent differences between MSF-J and Chainman Shale pyrolyzate.« less

Paleogeographic evolution of carbonate reservoirs: geological and geophysical analysis at the Albian Campos Basin, Brazil

NASA Astrophysics Data System (ADS)

Castillo Vincentelli, Maria Gabriela; Favoreto, Julia; Roemers-Oliveira, Eduardo

2018-02-01

An integrated geophysical and geological analysis of a carbonate reservoir can offer an effective method to better understand the paleogeographical evolution and distribution of a geological reservoir and non-reservoir facies. Therefore, we propose a better method for obtaining geological facies from geophysical facies, helping to characterize the permo-porous system of this kind of play. The goal is to determine the main geological phases from a specific hydrocarbon producer (Albian Campos Basin, Brazil). The applied method includes the use of a petrographic and qualitative description from the integrated reservoir with seismic interpretation of an attribute map (energy, root mean square, mean amplitude, maximum negative amplitude, etc), all calculated at the Albian level for each of the five identified phases. The studied carbonate reservoir is approximately 6 km long with a main direction of NE-SW, and it was sub-divided as follows (from bottom to top): (1) the first depositional sequence of the bank was composed mainly of packstone, indicating that the local structure adjacent to the main bank is protected from environmental conditions; (2) characterized by the presence of grainstone developed at the higher structure; (3) the main sequence of the peloidal packstone with mudstones oncoids; (4) corresponds to the oil production of carbonate reservoirs formed by oolitic grainstone deposited at the top of the carbonate bank; at this phase, rising sea levels formed channels that connected the open sea shelf with the restricted circulation shelf; and (5) mudstone and wackestone represent the system’s flooding phase.

Multiseasonal and geobotanical approach in remote detection of greisenization areas in the Serra da Pedra Branca Granite, Goias State, Brazil

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Almeidafilho, R.

1983-01-01

Multiseasonal analysis of LANDSAT multispectral images in CCT format permitted the mapping of lithologic facies in the Pedra Branca Granite, using geobotanical associations, which occur in the form of variations in the density of cerrado vegetation, as well as the predominance of certain distinctive vegetation species. Dry season images did not show very good results in lithological differentiation due to anomalous illumination conditions related to the low solar elevation and the homogeneity in the vegetation cover, specially the grasses that become dry during this season. Rainy season image, on the other hand, allowed the separation of the lithological types, a fact that can be attributed to a greater differentiation among the geobotanical associations. As a result of this study, the muscovite-granite facies with greisenization zones, which are lithological indicators of important tin mineralization within the Serra da Pedra Branca Granite, were mapped. This methodology can be sucessfully applied to similar known granite bodies elsewhere in the Tin Province of Goias.

Multitemporal and geobotanical approach in the remote detection of Greisenization areas in the Serra da Pedra Branca Granite, Goias State, Brazil

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Filho, R. A.

1982-01-01

A multiseasonal analysis of LANDSAT multispectral images in CCT format permitted the mapping of lithologic facies in the Pedra Branca Granite, using geobotanical associations, which occur in the form of variations in the density of the cerrado vegetation, as well as the predominance of certain distinct vegetation species. Dry season images did not show very good results in lithological differentiation due to anomalous illumination conditions related to the low solar elevation and the homogeneity in the vegetation cover, specially the grass that becomes dry during this season. Rainy season images, on the other hand, allowed the separation of the lithological types, a fact that can be attributed to a greater differentiation among the geobotanical associations. The muscovite-granite facies with greisenization zones within the Serra da Pedra Branca were mapped. This methodology can be successfully applied to similar known granite bodies elsewhere in the Tin Province of Goias.

Relative role of transfer zones in controlling sequence stacking patterns and facies distribution: insights from the Fushan Depression, South China Sea

NASA Astrophysics Data System (ADS)

Liu, Entao; Wang, Hua; Li, Yuan; Huang, Chuanyan

2015-04-01

In sedimentary basins, a transfer zone can be defined as a coordinated system of deformational features which has good prospects for hydrocarbon exploration. Although the term 'transfer zone' has been widely applied to the study of extensional basins, little attention has been paid to its controlling effect on sequence tracking pattern and depositional facies distribution. Fushan Depression is a half-graben rift sub-basin, located in the southeast of the Beibuwan Basin, South China Sea. In this study, comparative analysis of seismic reflection, palaeogeomorphology, fault activity and depositional facies distribution in the southern slope indicates that three different types of sequence stacking patterns (i.e. multi-level step-fault belt in the western area, flexure slope belt in the central area, gentle slope belt in the eastern area) were developed along the southern slope, together with a large-scale transfer zone in the central area, at the intersection of the western and eastern fault systems. Further analysis shows that the transfer zone played an important role in the diversity of sequence stacking patterns in the southern slope by dividing the Fushan Depression into two non-interfering tectonic systems forming different sequence patterns, and leading to the formation of the flexure slope belt in the central area. The transfer zone had an important controlling effect on not only the diversity of sequence tracking patterns, but also the facies distribution on the relay ramp. During the high-stand stage, under the controlling effect of the transfer zone, the sediments contain a significant proportion of coarser material accumulated and distributed along the ramp axis. By contrast, during the low-stand stage, the transfer zone did not seem to contribute significantly to the low-stand fan distribution which was mainly controlled by the slope gradient (palaeogeomorphology). Therefore, analysis of the transfer zone can provide a new perspective for basin analysis. In addition, the transfer zone area demonstrated unique hydrocarbon accumulation models different from the western and eastern areas. It was not only a structural high combined with sufficient coarse-grained reservoir quality sands, but was also associated with large-scale sublacustrine fan deposits with high quality reservoirs, indicating that the recognition of transfer zones can improve the prediction of hydrocarbon occurrences in similar settings.

Facies analysis, diagenesis and sequence stratigraphy of the carbonate-evaporite succession of the Upper Jurassic Surmeh Formation: Impacts on reservoir quality (Salman Oil Field, Persian Gulf, Iran)

NASA Astrophysics Data System (ADS)

Beigi, Maryam; Jafarian, Arman; Javanbakht, Mohammad; Wanas, H. A.; Mattern, Frank; Tabatabaei, Amin

2017-05-01

This study aims to determine the depositional facies, diagenetic processes and sequence stratigraphic elements of the subsurface carbonate-evaporite succession of the Upper Jurassic (Kimmeridgian-Tithonian) Surmeh Formation of the Salman Oil Field (the Persian Gulf, Iran), in an attempt to explore their impacts on reservoir quality. The Surmeh Formation consists mainly of carbonate rocks, intercalated with evaporite layers. Petrographically, the Surmeh Formation consists of nine microfacies (MF1-MF9). These microfacies are grouped into three facies associations related to three depositional environments (peritidal flat, lagoon and high-energy shoal) sited on the inner part of a homoclinal carbonate ramp. The recorded diagenetic processes include dolomitization, anhydritization, compaction, micritization, neomorphism, dissolution and cementation. Vertical stacking patterns of the studied facies reveal the presence of three third-order depositional sequences, each of which consists of transgressive systems tract (TST) and highstand systems tract (HST). The TSTs comprise intertidal and lagoon facies whereas the HSTs include supratidal and shoal facies. In terms of their impacts on reservoir quality, the shoal facies represent the best reservoir quality, whereas the peritidal and lagoonal facies exhibit moderate to lowest reservoir quality. Also, poikilotopic anhydrite cement played the most significant role in declining the reservoir quality, whereas the widespread dissolution of labile grains and formation of moldic and vuggy pores contributed in enhancing the reservoir quality. In addition, the HSTs have a better reservoir quality than the TSTs. This study represents an approach to use the depositional facies, diagenetic alterations and sequence stratigraphic framework of carbonate -evaporite succession for a more successful reservoir characterization.

Acoustic Facies Analysis of Side-Scan Sonar Data

NASA Astrophysics Data System (ADS)

Dwan, Fa Shu

Acoustic facies analysis methods have allowed the generation of system-independent values for the quantitative seafloor acoustic parameter, backscattering strength, from GLORIA and (TAMU) ^2 side-scan sonar data. The resulting acoustic facies parameters enable quantitative comparisons of data collected by different sonar systems, data from different environments, and measurements made with survey geometries. Backscattering strength values were extracted from the sonar amplitude data by inversion based on the sonar equation. Image processing products reveal seafloor features and patterns of relative intensity. To quantitatively compare data collected at different times or by different systems, and to ground truth-measurements and geoacoustic models, quantitative corrections must be made on any given data set for system source level, beam pattern, time-varying gain, processing gain, transmission loss, absorption, insonified area contribution, and grazing angle effects. In the sonar equation, backscattering strength is the sonar parameter which is directly related to seafloor properties. The GLORIA data used in this study are from the edge of a distal lobe of the Monterey Fan. An interfingered region of strong and weak seafloor signal returns from a flat seafloor region provides an ideal data set for this study. Inversion of imagery data from the region allows the quantitative definition of different acoustic facies. The (TAMU) ^2 data used are from a calibration site near the Green Canyon area of the Gulf of Mexico. Acoustic facies analysis techniques were implemented to generate statistical information for acoustic facies based on the estimates of backscattering strength. The backscattering strength values have been compared with Lambert's Law and other functions to parameterize the description of the acoustic facies. The resulting Lambertian constant values range from -26 dB to -36 dB. A modified Lambert relationship, which consists of both intercept and slope terms, appears to represent the BSS versus grazing angle profiles better based on chi^2 testing and error ellipse generation. Different regression functions, composed of trigonometric functions, were analyzed for different segments of the BSS profiles. A cotangent or sine/cosine function shows promising results for representing the entire grazing angle span of the BSS profiles.

Integrated core-log petrofacies analysis in the construction of a reservoir geomodel: A case study of a mature Mississippian carbonate reservoir using limited data

USGS Publications Warehouse

Bhattacharya, S.; Doveton, J.H.; Carr, T.R.; Guy, W.R.; Gerlach, P.M.

2005-01-01

Small independent operators produce most of the Mississippian carbonate fields in the United States mid-continent, where a lack of integrated characterization studies precludes maximization of hydrocarbon recovery. This study uses integrative techniques to leverage extant data in an Osagian and Meramecian (Mississippian) cherty carbonate reservoir in Kansas. Available data include petrophysical logs of varying vintages, limited number of cores, and production histories from each well. A consistent set of assumptions were used to extract well-level porosity and initial saturations, from logs of different types and vintages, to build a geomodel. Lacking regularly recorded well shut-in pressures, an iterative technique, based on material balance formulations, was used to estimate average reservoir-pressure decline that matched available drillstem test data and validated log-analysis assumptions. Core plugs representing the principal reservoir petrofacies provide critical inputs for characterization and simulation studies. However, assigning plugs among multiple reservoir petrofacies is difficult in complex (carbonate) reservoirs. In a bottom-up approach, raw capillary pressure (Pc) data were plotted on the Super-Pickett plot, and log- and core-derived saturation-height distributions were reconciled to group plugs by facies, to identify core plugs representative of the principal reservoir facies, and to discriminate facies in the logged interval. Pc data from representative core plugs were used for effective pay evaluation to estimate water cut from completions, in infill and producing wells, and guide-selective perforations for economic exploitation of mature fields. The results from this study were used to drill 22 infill wells. Techniques demonstrated here can be applied in other fields and reservoirs. Copyright ?? 2005. The American Association of Petroleum Geologists. All rights reserved.

Discrete Regularization for Calibration of Geologic Facies Against Dynamic Flow Data

NASA Astrophysics Data System (ADS)

Khaninezhad, Mohammad-Reza; Golmohammadi, Azarang; Jafarpour, Behnam

2018-04-01

Subsurface flow model calibration involves many more unknowns than measurements, leading to ill-posed problems with nonunique solutions. To alleviate nonuniqueness, the problem is regularized by constraining the solution space using prior knowledge. In certain sedimentary environments, such as fluvial systems, the contrast in hydraulic properties of different facies types tends to dominate the flow and transport behavior, making the effect of within facies heterogeneity less significant. Hence, flow model calibration in those formations reduces to delineating the spatial structure and connectivity of different lithofacies types and their boundaries. A major difficulty in calibrating such models is honoring the discrete, or piecewise constant, nature of facies distribution. The problem becomes more challenging when complex spatial connectivity patterns with higher-order statistics are involved. This paper introduces a novel formulation for calibration of complex geologic facies by imposing appropriate constraints to recover plausible solutions that honor the spatial connectivity and discreteness of facies models. To incorporate prior connectivity patterns, plausible geologic features are learned from available training models. This is achieved by learning spatial patterns from training data, e.g., k-SVD sparse learning or the traditional Principal Component Analysis. Discrete regularization is introduced as a penalty functions to impose solution discreteness while minimizing the mismatch between observed and predicted data. An efficient gradient-based alternating directions algorithm is combined with variable splitting to minimize the resulting regularized nonlinear least squares objective function. Numerical results show that imposing learned facies connectivity and discreteness as regularization functions leads to geologically consistent solutions that improve facies calibration quality.

ChemCam results from the Shaler outcrop in Gale crater, Mars

USGS Publications Warehouse

Anderson, Ryan B.; Bridges, J.C.; Williams, A.; Edgar, L.; Ollila, A.; Williams, J.; Nachon, Marion; Mangold, N.; Fisk, M.; Schieber, J.; Gupta, S.; Dromart, G.; Wiens, R.; Le Mouélic, Stéphane; Forni, O.; Lanza, N.; Mezzacappa, Alissa; Sautter, V.; Blaney, D.; Clark, B.; Clegg, S.; Gasnault, O.; Lasue, J.; Léveillé, Richard; Lewin, E.; Lewis, K.W.; Maurice, S.; Newsom, H.; Schwenzer, S.P.; Vaniman, D.

2015-01-01

The ChemCam campaign at the fluvial sedimentary outcrop “Shaler” resulted in observations of 28 non-soil targets, 26 of which included active laser induced breakdown spectroscopy (LIBS), and all of which included Remote Micro-Imager (RMI) images. The Shaler outcrop can be divided into seven facies based on grain size, texture, color, resistance to erosion, and sedimentary structures. The ChemCam observations cover Facies 3 through 7. For all targets, the majority of the grains were below the limit of the RMI resolution, but many targets had a portion of resolvable grains coarser than ∼0.5 mm. The Shaler facies show significant scatter in LIBS spectra and compositions from point to point, but several key compositional trends are apparent, most notably in the average K2O content of the observed facies. Facies 3 is lower in K2O than the other facies and is similar in composition to the “snake,” a clastic dike that occurs lower in the Yellowknife Bay stratigraphic section. Facies 7 is enriched in K2O relative to the other facies and shows some compositional and textural similarities to float rocks near Yellowknife Bay. The remaining facies (4, 5, and 6) are similar in composition to the Sheepbed and Gillespie Lake members, although the Shaler facies have slightly elevated K2O and FeOT. Several analysis points within Shaler suggest the presence of feldspars, though these points have excess FeOT which suggests the presence of Fe oxide cement or inclusions. The majority of LIBS analyses have compositions which indicate that they are mixtures of pyroxene and feldspar. The Shaler feldspathic compositions are more alkaline than typical feldspars from shergottites, suggesting an alkaline basaltic source region, particularly for the K2O-enriched Facies 7. Apart from possible iron-oxide cement, there is little evidence for chemical alteration at Shaler, although calcium-sulfate veins comparable to those observed lower in the stratigraphic section are present. The differing compositions, and inferred provenances at Shaler, suggest compositionally heterogeneous terrain in the Gale crater rim and surroundings, and intermittent periods of deposition.

Mapping Depositional Facies on Great Bahama Bank: An Integration of Groundtruthing and Remote Sensing Methods

NASA Astrophysics Data System (ADS)

Hariss, M.; Purkis, S.; Ellis, J. M.; Swart, P. K.; Reijmer, J.

2013-12-01

Great Bahama Bank (GBB) has been used in many models to illustrate depositional facies variation across flat-topped, isolated carbonate platforms. Such models have served as subsurface analogs at a variety of scales. In this presentation we have integrated Landsat TM imagery, a refined bathymetric digital elevation model, and seafloor sample data compiled into ArcGIS and analyzed with eCognition to develop a depositional facies map that is more robust than previous versions. For the portion of the GBB lying to the west of Andros Island, the facies map was generated by pairing an extensive set of GPS-constrained field observations and samples (n=275) (Reijmer et al., 2009, IAS Spec Pub 41) with computer and manual interpretation of the Landsat imagery. For the remainder of the platform, which lacked such rigorous ground-control, the Landsat imagery was segmented into lithotopes - interpreted to be distinct bodies of uniform sediment - using a combination of edge detection, spectral and textural analysis, and manual editing. A map was then developed by assigning lithotopes to facies classes on the basis of lessons derived from the portion of the platform for which we had rigorous conditioning. The new analysis reveals that GBB is essentially a very grainy platform with muddier accumulations only in the lee of substantial island barriers; in this regard Andros Island, which is the largest island on GBB, exerts a direct control over the muddiest portion of GBB. Mudstones, wackestones, and mud-rich packstones cover 7%, 6%, and 15%, respectively, of the GBB platform top. By contrast, mud-poor packstones, grainstones, and rudstones account for 19%, 44%, and 3%, respectively. Of the 44% of the platform-top classified as grainstone, only 4% is composed of 'high-energy' deposits characterized by the development of sandbar complexes. The diversity and size of facies bodies is broadly the same on the eastern and western limb of the GBB platform, though the narrower eastern limb, the New Providence Platform, hosts a higher prevalence of high energy grainstones. The most abrupt lateral facies changes are observed leeward of islands, areas which also hold the highest diversity in facies type.

Nonpoint Source Solute Transport Normal to Aquifer Bedding in Heterogeneous, Markov Chain Random Fields

NASA Astrophysics Data System (ADS)

Zhang, H.; Harter, T.; Sivakumar, B.

2005-12-01

Facies-based geostatistical models have become important tools for the stochastic analysis of flow and transport processes in heterogeneous aquifers. However, little is known about the dependency of these processes on the parameters of facies- based geostatistical models. This study examines the nonpoint source solute transport normal to the major bedding plane in the presence of interconnected high conductivity (coarse- textured) facies in the aquifer medium and the dependence of the transport behavior upon the parameters of the constitutive facies model. A facies-based Markov chain geostatistical model is used to quantify the spatial variability of the aquifer system hydrostratigraphy. It is integrated with a groundwater flow model and a random walk particle transport model to estimate the solute travel time probability distribution functions (pdfs) for solute flux from the water table to the bottom boundary (production horizon) of the aquifer. The cases examined include, two-, three-, and four-facies models with horizontal to vertical facies mean length anisotropy ratios, ek, from 25:1 to 300:1, and with a wide range of facies volume proportions (e.g, from 5% to 95% coarse textured facies). Predictions of travel time pdfs are found to be significantly affected by the number of hydrostratigraphic facies identified in the aquifer, the proportions of coarse-textured sediments, the mean length of the facies (particularly the ratio of length to thickness of coarse materials), and - to a lesser degree - the juxtapositional preference among the hydrostratigraphic facies. In transport normal to the sedimentary bedding plane, travel time pdfs are not log- normally distributed as is often assumed. Also, macrodispersive behavior (variance of the travel time pdf) was found to not be a unique function of the conductivity variance. The skewness of the travel time pdf varied from negatively skewed to strongly positively skewed within the parameter range examined. We also show that the Markov chain approach may give significantly different travel time pdfs when compared to the more commonly used Gaussian random field approach even though the first and second order moments in the geostatistical distribution of the lnK field are identical. The choice of the appropriate geostatistical model is therefore critical in the assessment of nonpoint source transport.

Seismic facies analysis of shallowly buried channels, New Jersey continental shelf: understanding late Quaternary paleoenvironments during the last transgression

NASA Astrophysics Data System (ADS)

Nordfjord, S.; Goff, J. A.; Austin, J. A.; Gulick, S. P.; Sommerfield, C.; Alexander, C.; Schock, S.

2004-12-01

We are investigating the late Quaternary sedimentary record of the New Jersey mid-outer continental shelf using deep-towed chirp sonar (1-4 kHz and 1-15 kHz) profiles, coupled with lithologic and chronostratigraphic control from long sediment cores collected using the DOSECC AHC-800 drilling system. We have seismically mapped extensive, shallowly buried, dendritic drainage systems. Observed seismic facies distributions suggest the complex nature of channel fills, and synthetic seismograms derived from MST logs enable us to correlate the chirp data to changes in lithology and physical properties of the cored samples, including channel fills, confirming that fine-grained material is transparent seismically, while interbedded sand and mud produce laminated reflections. We suggest that these channels probably formed during shelfal exposure coincident with the last glacial lowstand along this margin. Observed seismic facies superposition within valley fills is in part consistent with a tripartite zonation derived from wave-dominated estuary models. We have mapped four main facies within these dendritic incised valleys: (1) The lower facies, SF1, consists of a high-amplitude chaotic configuration. We interpret this facies as lowstand fluvial fill; (2) Overlying facies SF2 is generally a thin layer (<1-2m) of stratified, high amplitude reflectors in valley axes. This facies is characterized by small wedges along channel flanks, with a generally transparent acoustic response, but occasionally also by internal clinoforms. This facies could have been deposited as transgression began, by backfilling of valleys (bayhead delta? aggradational alluvial deposits?); (3) SF3 is generally transparent; subtle horizontal and parallel reflectors onlap channel flanks. We interpret this facies as representing central basin/bay deposits, a low-energy zones during the transgression, perhaps related to turbidity maxima; (4) SF4 is observed only in the seaward end of the valley. This facies is more variable in amplitude and configuration, and includes a laminated acoustic response, small erosional surfaces, and some wavy reflections. We think the complexity of this facies likely reflects deposition of an estuary mouth complex in a dynamic environment, including frequent lateral variations in sedimentary facies from tidal inlets, washovers, tidal-deltas and barriers. A seismic transition upward from chaotic to flat-lying reflections and a more transparent acoustic response indicates less depositional energy, suggesting replacement of fluvial systems by tidal/estuarine environments. This has been confirmed by vibra-coring of one channel. Our paleo-flow reconstructions also yield velocities in the range of 0.5-1.5 m/s, which are reasonable estimates for flows in estuarine environments.

Diverse microbially induced sedimentary structures from 1 Ga lakes of the Diabaig Formation, Torridon Group, northwest Scotland

NASA Astrophysics Data System (ADS)

Callow, Richard H. T.; Battison, Leila; Brasier, Martin D.

2011-08-01

The siliciclastic lacustrine rocks of the ~ 1000 Ma Diabaig Formation, northwest Scotland, contain a remarkable diversity of macroscopic structures on bedding planes that can be compared with various kinds of microbially induced sedimentary structures (MISS). Field sedimentological investigations, combined with laboratory analysis of bedding planes and petrographic study of thin sections have allowed us to characterise a range of depositional environments and document the spectrum of biological structures. MISS are reported from frequently subaerial environments, through commonly submerged facies, and down to permanently sub-wavebase settings. Palaeoenvironmental conditions (water depth, exposure, hydrodynamic energy) control the distribution of MISS within these facies. This demonstrates that mat-forming microbial communities were arguably well adapted to low light levels or periodic exposure. Some MISS from the Diabaig Formation are typical of Precambrian microbial mats, including reticulate fabrics and 'old elephant skin' textures. In addition to these, a number of new and unusual fabrics of putative microbial origin are described, including linear arrays of ridges and grooves (cf. 'Arumberia') and discoidal structures that are comparable with younger Ediacaran fossils such as Beltanelliformis. These observations indicate that benthic microbial ecosystems were thriving in freshwater lake systems ~ 1000 Ma, and indicate how microbially induced sedimentary structures may be applied as facies indicators for Proterozoic lacustrine environments. The discovery of structures closely resembling Ediacaran fossils (cf. Beltanelliformis) also serves to highlight the difficulty of interpreting simple discoidal bedding plane structures as metazoan fossils.

Anatomy of a lower Mississippian oil reservoir, West Virginia, United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patchen, D.; Hohn, M.E.; McDowell, R.

1993-09-01

Several lines of evidence indicate that the oil reservoir in Granny Creek field is compartmentalized due to internal heterogeneities: an analysis of initial open flows vs. year completed and well location; mapping of initial open flows and cumulative production; and the nonuniform behavior of injection pressures and rates in waterflood patterns. The Big Injun sandstones includes an upper, coarse-grained, fluvial channel facies, and a lower, fine-grained, distributary mouthbar facies. The bar facies is the main reservoir, and can be subdivided into crest, distal, and proximal subfacies. Low original porosity and permeability in the poorly sorted channel facies was reduced furthermore » by quartz cementation. In contrast, chlorite coatings restricted quartz cementation and preserved porosity and permeability in the proximal bar subfacies. Small, low-amplitude folds plunge northeastward on the flank of the main syncline in which the fields is located. These minor structural highs seem to match areas of high initial open flows and cumulative production. High production also occurs where the distal and marine-influenced, proximal mouth-bar subfacies pinch out against at least a few feet of the relatively impremeable channel facies. Lower production is associated with (1) thin areas of proximal mouth-bar subfacies; (2) a change from marine to fluvial dominance of the bar facies, which is accompanied by a reduction in porosity and permeability; and (3) loss of the less permeable channel facies above the porous reservoir sandstone, due to downcutting by regional erosion that produced a post-Big Injun unconformity.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hlaing, K.K.; Lemoy, C.; Maret, J.P.

Conventional sonic measurements of shear and compressional slowness are body waves that travel within the formation and are commonly used for petrophysical analysis of a well. Low-frequency Stoneley waves travel within the well bore and are traditionally used to interpret fractures and formation permeability, usually by analyzing the energy losses and, to a lesser extent, the slowness. The authors have found that Stoneley energy has been very useful in the identification of vuggy carbonate facies linked to paleokarstic surfaces in the Upper Burman limestone reservoir of Miocene age, in the YADANA gas deposit, offshore Myanmar. One good example is seenmore » in well YAD-1 where the carbonate reservoir has been cored, allowing precise facies and porosity type determination. Matching Stoneley energy and core description show a striking correlation between loss of energy and vuggy carbonate facies due to karstic diagenetic processes, always in relation with reefal or near reefal facies. Accordingly, facies interpretation has tentatively been done in the deeper, noncored reservoir zone, where losses of energy are important and considered as indicating karstic influence and the specific environment.« less

Parts-based geophysical inversion with application to water flooding interface detection and geological facies detection

NASA Astrophysics Data System (ADS)

Zhang, Junwei

I built parts-based and manifold based mathematical learning model for the geophysical inverse problem and I applied this approach to two problems. One is related to the detection of the oil-water encroachment front during the water flooding of an oil reservoir. In this application, I propose a new 4D inversion approach based on the Gauss-Newton approach to invert time-lapse cross-well resistance data. The goal of this study is to image the position of the oil-water encroachment front in a heterogeneous clayey sand reservoir. This approach is based on explicitly connecting the change of resistivity to the petrophysical properties controlling the position of the front (porosity and permeability) and to the saturation of the water phase through a petrophysical resistivity model accounting for bulk and surface conductivity contributions and saturation. The distributions of the permeability and porosity are also inverted using the time-lapse resistivity data in order to better reconstruct the position of the oil water encroachment front. In our synthetic test case, we get a better position of the front with the by-products of porosity and permeability inferences near the flow trajectory and close to the wells. The numerical simulations show that the position of the front is recovered well but the distribution of the recovered porosity and permeability is only fair. A comparison with a commercial code based on a classical Gauss-Newton approach with no information provided by the two-phase flow model fails to recover the position of the front. The new approach could be also used for the time-lapse monitoring of various processes in both geothermal fields and oil and gas reservoirs using a combination of geophysical methods. A paper has been published in Geophysical Journal International on this topic and I am the first author of this paper. The second application is related to the detection of geological facies boundaries and their deforation to satisfy to geophysica data and prior distributions. We pose the geophysical inverse problem in terms of Gaussian random fields with mean functions controlled by petrophysical relationships and covariance functions controlled by a prior geological cross-section, including the definition of spatial boundaries for the geological facies. The petrophysical relationship problem is formulated as a regression problem upon each facies. The inversion is performed in a Bayesian framework. We demonstrate the usefulness of this strategy using a first synthetic case study, performing a joint inversion of gravity and galvanometric resistivity data with the stations all located at the ground surface. The joint inversion is used to recover the density and resistivity distributions of the subsurface. In a second step, we consider the possibility that the facies boundaries are deformable and their shapes are inverted as well. We use the level set approach to deform the facies boundaries preserving prior topological properties of the facies throughout the inversion. With the additional help of prior facies petrophysical relationships, topological characteristic of each facies, we make posterior inference about multiple geophysical tomograms based on their corresponding geophysical data misfits. The result of the inversion technique is encouraging when applied to a second synthetic case study, showing that we can recover the heterogeneities inside the facies, the mean values for the petrophysical properties, and, to some extent, the facies boundaries. A paper has been submitted to Geophysics on this topic and I am the first author of this paper. During this thesis, I also worked on the time lapse inversion problem of gravity data in collaboration with Marios Karaoulis and a paper was published in Geophysical Journal international on this topic. I also worked on the time-lapse inversion of cross-well geophysical data (seismic and resistivity) using both a structural approach named the cross-gradient approach and a petrophysical approach. A paper was published in Geophysics on this topic.

Depositional settings and evolution of a fjord system during the carboniferous glaciation in Northwest Argentina

NASA Astrophysics Data System (ADS)

Alonso-Muruaga, Pablo J.; Limarino, Carlos O.; Spalletti, Luis A.; Colombo Piñol, Ferrán

2018-07-01

Fjord systems, represented by glacial diamictites and postglacial transgressive shales, formed in the basins of western Argentina during the late Carboniferous Gondwana glaciation. Well exposed fjord deposits of the Guandacol Formation were studied in the Loma de Los Piojos region (Protoprecordillera), where they fill a 2.9 km wide paleovalley with steep side walls and a relatively flat floor. The valley cross-cuts Lower Devonian sandstones and Mississippian mudstones and sandstones, and provides evidence of glacial abrasion, including striated pavements and glacial microtopography (grooves, ridges, and striae). Based on the analysis of seven sedimentary logs, eight sedimentary facies in the valley fill were recognized: (A) Massive diamictites; (B) Laminated mudstones with dropstones; (C) Stratified diamictites; (D) Clast-supported conglomerates and sandstones; (E) Deformed diamictites, conglomerates and sandstones; (F) Folded diamictites; (G) Mudstones interbedded with sandstones, and (H) Stacked and amalgamated sandstones. These sedimentary facies are grouped into two principal facies assemblages that represent different stages of the paleovalley fill. Assemblage 1 is composed of diamictites (Facies A, C and F), laminated mudstones with dropstones (Facies B), and conglomerates (Facies D and E), which represent glacially influenced sedimentation in the paleovalley. Assemblage 2 represents the paleovalley fill when glacial influence ceased, and comprises laminated mudstones interbedded with sandstones (facies G) and stacked sandstone beds (facies H) that mostly record deltaic sedimentation. Stratigraphic relationships, plant fossils found in the paleovalley walls and palynological assemblages recovered in mudstones of facies D help to establish an early Pennsylvanian age for both the incision and the filling of the paleovalley. The studied paleovalley records an exceptional example of the western Gondwanan glacial to postglacial transition. Due to the continuous stratigraphic succession within the paleovalley as well as palynological, megafloristic and radiometric data, this example provides a complete framework of the late Carboniferous postglacial evolution in western Gondwana.

Compared sub-bottom profile interpretation in fjords of King George Island and Danco Coast, Antarctica

NASA Astrophysics Data System (ADS)

Rodrigo, C.; Vilches, L.; Vallejos, C.; Fernandez, R.; Molares, R.

2015-12-01

The fjords of the South Shetland Islands (Antarctica) and Danco Coast (Antarctic Peninsula) represent climatic transitional areas (subpolar to polar). The analysis of the distribution of sub-bottom facies helps to understand the prevailing sedimentary and climatic processes. This work seeks to characterize and compare the fjord seismic facies, of the indicated areas, to determine the main sedimentary processes in these regions. Compressed High-Intensity Radiated Pulse (CHIRP) records from 3.5 kHz sub-bottom profiler were obtained from the cruise: NBP0703 (2007); and pinger 3.5 kHz sub-bottom profiler records from the cruises: ECA-50 INACH (2014), and First Colombian Expedition (2015). Several seismic facies were recognized in all studied areas with some variability on their thickness and extent, and indicate the occurrence of similar sedimentary processes. These are: SSD facies (strong to weak intensity, stratified, draped sheet external shape), is interpreted as sedimentary deposits originated from suspended sediments from glaciar plumes and/or ice-rafting. This facies, in general, is thicker in the fjords of King George Island than in the larger fjords of the Danco Coast; on the other hand, within the Danco Coast area, this facies is thinner and more scarce in the smaller fjords and bays. MCM facies (moderate intensity, chaotic and with mounds) is associated with moraine deposits and/or basement. This is present in all areas, being most abundant in the Danco Coast area. WIC facies (weak intensity and chaotic) is interpreted as debris flows, which are present in both regions, but is most common in small fjords or bays in the Danco Coast, perhaps due to higher slopes of the seabed. In this work we discuss the influence of local climate, sediment plumes from the glaciers and other sedimentary processes on the distribution and geometry of the identified seismic facies.

Lithofacies and seismic-reflection interpretation of temperate glacimarine sedimentation in Tarr Inlet, Glacier Bay, Alaska

USGS Publications Warehouse

Cai, J.; Powell, R.D.; Cowan, E.A.; Carlson, P.R.

1997-01-01

High-resolution seismic-reflection profiles of sediment fill within Tart Inlet of Glacier Bay, Alaska, show seismic facies changes with increasing distance from the glacial termini. Five types of seismic facies are recognized from analysis of Huntec and minisparker records, and seven lithofacies are determined from detailed sedimentologic study of gravity-, vibro- and box-cores, and bottom grab samples. Lithofacies and seismic facies associations, and fjord-floor morphology allow us to divide the fjord into three sedimentary environments: ice-proximal, iceberg-zone and ice-distal. The ice-proximal environment, characterized by a morainal-bank depositional system, can be subdivided into bank-back, bank-core and bank-front subenvironments, each of which is characterized by a different depositional subsystem. A bank-back subsystem shows chaotic seismic facies with a mounded surface, which we infer consists mainly of unsorted diamicton and poorly sorted coarse-grained sediments. A bank-core depositional subsystem is a mixture of diamicton, rubble, gravel, sand and mud. Seismic-reflection records of this subsystem are characterized by chaotic seismic facies with abundant hyperbolic diffractions and a hummocky surface. A bank-front depositional subsystem consists of mainly stratified and massive sand, and is characterized by internal hummocky facies on seismic-reflection records with significant surface relief and sediment gravity flow channels. The depositional system formed in the iceberg-zone environment consists of rhythmically laminated mud interbedded with thin beds of weakly stratified diamicton and stratified or massive sand and silt. On seismic-reflection profiles, this depositional system is characterized by discontinuously stratified facies with multiple channels on the surface in the proximal zone and a single channel on the largely flat sediment surface in the distal zone. The depositional system formed in the ice-distal environment consists of interbedded homogeneous or laminated mud and massive or stratified sand and coarse silt. This depositional system shows continuously stratified seismic facies with smooth and flat surfaces on minisparker records, and continuously stratified seismic facies which are interlayered with thin weakly stratified facies on Huntec records.

Completed Ensemble Empirical Mode Decomposition: a Robust Signal Processing Tool to Identify Sequence Strata

NASA Astrophysics Data System (ADS)

Purba, H.; Musu, J. T.; Diria, S. A.; Permono, W.; Sadjati, O.; Sopandi, I.; Ruzi, F.

2018-03-01

Well logging data provide many geological information and its trends resemble nonlinear or non-stationary signals. As long well log data recorded, there will be external factors can interfere or influence its signal resolution. A sensitive signal analysis is required to improve the accuracy of logging interpretation which it becomes an important thing to determine sequence stratigraphy. Complete Ensemble Empirical Mode Decomposition (CEEMD) is one of nonlinear and non-stationary signal analysis method which decomposes complex signal into a series of intrinsic mode function (IMF). Gamma Ray and Spontaneous Potential well log parameters decomposed into IMF-1 up to IMF-10 and each of its combination and correlation makes physical meaning identification. It identifies the stratigraphy and cycle sequence and provides an effective signal treatment method for sequence interface. This method was applied to BRK- 30 and BRK-13 well logging data. The result shows that the combination of IMF-5, IMF-6, and IMF-7 pattern represent short-term and middle-term while IMF-9 and IMF-10 represent the long-term sedimentation which describe distal front and delta front facies, and inter-distributary mouth bar facies, respectively. Thus, CEEMD clearly can determine the different sedimentary layer interface and better identification of the cycle of stratigraphic base level.

Structural and facies characterization of the Niobrara Formation in Goshen and Laramie counties, Wyoming

NASA Astrophysics Data System (ADS)

Kernan, Nicholas Devereux

The Niobrara Formation is a fine-grained marine rock deposited in the Western Interior Seaway during the Late Cretaceous. It is composed of fossil-rich interlayered shale, marls, and chalks. Recent interest in the Niobrara has grown due to the advent of lateral drilling and multi-stage hydraulic fracturing. This technology allows operators to economically extract hydrocarbons from chalkier Niobrara facies. Yet two aspects of the Niobrara Formation have remained enigmatic. The first is the occurrence of abundant, randomly oriented, layer-bound, normal faults. The second is the large degree of vertical heterogeneity. This research aimed to increase understanding in both these aspects of the Niobrara Formation. Randomly oriented normal faults have been observed in Niobrara outcrops for nearly a hundred years. Recent high resolution 3D seismic in the Denver Basin has allowed investigators to interpret these faults as part of a polygonal fault system (PFS). PFS are layer bound extensional structures that typically occur in fine-grained marine sediments. Though their genesis and development is still poorly understood, their almost exclusive occurrence in fine-grained rocks indicates their origin is linked to lithology. Interpretation of a 3D seismic cube in Southeast Wyoming found a tier of polygonal faulting within the Greenhorn-Carlile formations and another tier of polygonal faulting within the Niobrara and Pierre formations. This research also found that underlying structural highs influence fault growth and geometries within both these tiers. Core data and thin sections best describe vertical heterogeneity in fine-grained rocks. This investigation interpreted core data and thin sections in a well in Southeast Wyoming and identified 10 different facies. Most of these facies fall within a carbonate/clay spectrum with clay-rich facies deposited during periods of lower sea level and carbonate-rich facies deposited during periods of higher sea level. Because the average operator will typically have little core but abundant well logs, this investigation used three different methods of describing facies variability with logs. Facies interpreted with these methods are referred to as electrofacies. First, a conventional interpretation of Niobrara sub-units was done using gamma ray and resistivity logs. Then a cluster analysis was conducted on an extensive petrophysical log suite. Finally, a neural network was trained with the previous core interpretation so that it learned to identify facies from logs. The research found that when little core is available a cluster analysis method can capture significant amounts of vertical heterogeneity within the Niobrara Formation. But if core is available then a neural network method provides more meaningful and higher resolution interpretations.

Neural network modeling and an uncertainty analysis in Bayesian framework: A case study from the KTB borehole site

NASA Astrophysics Data System (ADS)

Maiti, Saumen; Tiwari, Ram Krishna

2010-10-01

A new probabilistic approach based on the concept of Bayesian neural network (BNN) learning theory is proposed for decoding litho-facies boundaries from well-log data. We show that how a multi-layer-perceptron neural network model can be employed in Bayesian framework to classify changes in litho-log successions. The method is then applied to the German Continental Deep Drilling Program (KTB) well-log data for classification and uncertainty estimation in the litho-facies boundaries. In this framework, a posteriori distribution of network parameter is estimated via the principle of Bayesian probabilistic theory, and an objective function is minimized following the scaled conjugate gradient optimization scheme. For the model development, we inflict a suitable criterion, which provides probabilistic information by emulating different combinations of synthetic data. Uncertainty in the relationship between the data and the model space is appropriately taken care by assuming a Gaussian a priori distribution of networks parameters (e.g., synaptic weights and biases). Prior to applying the new method to the real KTB data, we tested the proposed method on synthetic examples to examine the sensitivity of neural network hyperparameters in prediction. Within this framework, we examine stability and efficiency of this new probabilistic approach using different kinds of synthetic data assorted with different level of correlated noise. Our data analysis suggests that the designed network topology based on the Bayesian paradigm is steady up to nearly 40% correlated noise; however, adding more noise (˜50% or more) degrades the results. We perform uncertainty analyses on training, validation, and test data sets with and devoid of intrinsic noise by making the Gaussian approximation of the a posteriori distribution about the peak model. We present a standard deviation error-map at the network output corresponding to the three types of the litho-facies present over the entire litho-section of the KTB. The comparisons of maximum a posteriori geological sections constructed here, based on the maximum a posteriori probability distribution, with the available geological information and the existing geophysical findings suggest that the BNN results reveal some additional finer details in the KTB borehole data at certain depths, which appears to be of some geological significance. We also demonstrate that the proposed BNN approach is superior to the conventional artificial neural network in terms of both avoiding "over-fitting" and aiding uncertainty estimation, which are vital for meaningful interpretation of geophysical records. Our analyses demonstrate that the BNN-based approach renders a robust means for the classification of complex changes in the litho-facies successions and thus could provide a useful guide for understanding the crustal inhomogeneity and the structural discontinuity in many other tectonically complex regions.

Shoreface to estuarine sedimentation in the late Paleocene Matanomadh Formation, Kachchh, western India

NASA Astrophysics Data System (ADS)

Srivastava, V. K.; Singh, B. P.

2017-04-01

Late Paleocene sedimentation in the pericratonic Kachchh Basin marks the initial marine transgression during the Cenozoic era. A 17 m thick sandstone-dominated succession, known as the clastic member (CM) of the Matanomadh Formation (MF), is exposed sporadically in the basin. Three facies associations are reconstructed in the succession in three different sections. Facies association-1 contains matrix-supported pebbly conglomerate facies, horizontally-laminated sandstone-mudstone alternation facies, hummocky- and swaley cross-bedded sandstone facies, wave-rippled sandstone facies and climbing ripple cross-laminated sandstone facies. This facies association developed between shoreface and foreshore zone under the influence of storms on a barrier ridge. Facies association-2 contains sigmoidal cross-bedded sandstone facies, sandstone-mudstone alternation facies, flaser-bedded sandstone facies, herringbone cross-bedded sandstone facies and tangential cross-bedded sandstone facies. This facies association possessing tidal bundles and herringbone cross-beds developed on a tidal flat with strong tidal influence. Facies association-3 comprises pebbly sandstone facies, horizontally-bedded sandstone facies, tangential cross-bedded sandstone facies exhibiting reactivation surfaces and tabular cross-bedded sandstone facies. This facies association represents sedimentation in a river-dominated estuary and reactivation surfaces and herringbone cross-beds indicating tidal influence. The bipolar paleocurrent pattern changes to unipolar up-section because of the change in the depositional currents from tidal to fluvial. The sedimentation took place in an open coast similar to the Korean coast. The presence of neap-spring tidal rhythmites further suggests that a semidiurnal system similar to the modern day Indian Ocean was responsible for the sedimentation. Here, the overall sequence developed during the transgressive phase where barrier ridge succession is succeeded by the tidal flat succession and the latter, in turn, is succeeded by the estuarine succession. This study resolves the most debated issue of initial marine transgression in the Kachchh Basin during the Cenozoic.

Sedimentology, sequence-stratigraphy, and geochemical variations in the Mesoproterozoic Nonesuch Formation, northern Wisconsin, USA

USGS Publications Warehouse

Kingsbury Stewart, Esther; Mauk, Jeffrey L.

2017-01-01

We use core descriptions and portable X-ray fluorescence analyses to identify lithofacies and stratigraphic surfaces for the Mesoproterozoic Nonesuch Formation within the Ashland syncline, Wisconsin. We group lithofacies into facies associations and construct a sequence stratigraphic framework based on lithofacies stacking and stratigraphic surfaces. The fluvial-alluvial facies association (upper Copper Harbor Conglomerate) is overlain across a transgressive surface by the fluctuating-profundal facies association (lower Nonesuch Formation). The fluctuating-profundal facies association comprises a retrogradational sequence set overlain across a maximum flooding surface by an aggradational-progradational sequence set comprising fluctuating-profundal, fluvial-lacustrine, and fluvial-alluvial facies associations (middle Nonesuch through lower Freda Formations). Lithogeochemistry supports sedimentologic and stratigraphic interpretations. Fe/S molar ratios reflect the oxidation state of the lithofacies; values are most depleted above the maximum flooding surface where lithofacies are chemically reduced and are greatest in the chemically oxidized lithofacies. Si/Al and Zr/Al molar ratios reflect the relative abundance of detrital heavy minerals vs. clay minerals; greater values correlate with larger grain size. Vertical facies association stacking records depositional environments that evolved from fluvial and alluvial, to balanced-fill lake, to overfilled lake, and returning to fluvial and alluvial. Elsewhere in the basin, where accommodation was greatest, some volume of fluvial-lacustrine facies is likely present below the transgressive stratigraphic surface. This succession of continental and lake-basin types indicates a predominant tectonic driver of basin evolution. Lithofacies distribution and geochemistry indicate deposition within an asymmetric half-graben bounded on the east by a west-dipping growth fault. While facies assemblages are lacustrine and continental, periodic marine incursions are probable, especially across maximum transgressive surfaces.We demonstrate a sequence-stratigraphic approach may be applied to fine-grained Precambrian sediments using traditional rock description and supporting lithogeochemistry. Identification of a characteristic lithofacies succession in Mesoproterozoic sediments demonstrates fundamental controls commonly interpreted for Phanerozoic lake systems may be extended into the Precambrian. These controls result in a predictable association of lithofacies, with distinct physical, biological, and geochemical properties. This has regional significance for carbon sequestration and the distribution of mineral and hydrocarbon resources and broader significance for addressing Mesoproterozoic paleogeographic reconstructions and questions related to the evolution of terrestrial life.

Basin analysis in the Southern Tethyan margin: Facies sequences, stratal pattern and subsidence history highlight extension-to-inversion processes in the Cretaceous Panormide carbonate platform (NW Sicily)

NASA Astrophysics Data System (ADS)

Basilone, Luca; Sulli, Attilio

2018-01-01

In the Mediterranean, the South-Tethys paleomargin experienced polyphased tectonic episodes and paleoenvironmental perturbations during Mesozoic time. The Cretaceous shallow-water carbonate successions of the Panormide platform, outcropping in the northern edge of the Palermo Mountains (NW Sicily), were studied by integrating facies and stratal pattern with backstripping analysis to recognize the tectonics vs. carbonate sedimentation interaction. The features of the Requienid limestone, including geometric configuration, facies sequence, lithological changes and significance of the top-unconformity, highlight that at the end of the Lower Cretaceous the carbonate platform was tectonically dismembered in various rotating fault-blocks. The variable trends of the subsidence curves testify to different responses, both uplift and downthrow, of various platform-blocks impacted by extensional tectonics. Physical stratigraphic and facies analysis of the Rudistid limestone highlight that during the Upper Cretaceous the previously carbonate platform faulted-blocks were subjected to vertical movements in the direction opposite to the displacement produced by the extensional tectonics, indicating a positive tectonic inversion. Comparisons with other sectors of the Southern Tethyan and Adria paleomargins indicate that during the Cretaceous these areas underwent the same extensional and compressional stages occurring in the Panormide carbonate platform, suggesting a regional scale significance, in time and kinematics, for these tectonic events.

Decoupling biogeochemical records, extinction, and environmental change during the Cambrian SPICE event

PubMed Central

Schiffbauer, James D.; Huntley, John Warren; Fike, David A.; Jeffrey, Matthew Jarrell; Gregg, Jay M.; Shelton, Kevin L.

2017-01-01

Several positive carbon isotope excursions in Lower Paleozoic rocks, including the prominent Upper Cambrian Steptoean Positive Carbon Isotope Excursion (SPICE), are thought to reflect intermittent perturbations in the hydrosphere-biosphere system. Models explaining these secular changes are abundant, but the synchronicity and regional variation of the isotope signals are not well understood. Examination of cores across a paleodepth gradient in the Upper Cambrian central Missouri intrashelf basin (United States) reveals a time-transgressive, facies-dependent nature of the SPICE. Although the SPICE event may be a global signal, the manner in which it is recorded in rocks should and does vary as a function of facies and carbonate platform geometry. We call for a paradigm shift to better constrain facies, stratigraphic, and biostratigraphic architecture and to apply these observations to the variability in magnitude, stratigraphic extent, and timing of the SPICE signal, as well as other biogeochemical perturbations, to elucidate the complex processes driving the ocean-carbonate system. PMID:28275734

Emplacement and deformation of the A-type Madeira granite (Amazonian Craton, Brazil)

NASA Astrophysics Data System (ADS)

Siachoque, Astrid; Salazar, Carlos Alejandro; Trindade, Ricardo

2017-04-01

The Madeira granite is one of the Paleoproterozoic (1.82 Ga) A-type granite intrusions in the Amazonian Craton. It is elongated in the NE-SW direction and is composed of four facies. Classical structural techniques and the anisotropy of magnetic susceptibility (AMS) method were applied to the study of its internal fabric. Magnetic susceptibility measurements, thermomagnetic curves, remanent coercivity spectra, optical microscopy and SEM (scanning electron microscopy) analyses were carried out on the earlier and later facies of the Madeira granite: the rapakivi granite (RG) and the albite granite (AG) respectively. The last one is subdivided into the border albite granite (BAG) and the core albite granite (CAG) subfacies. AMS fabric pattern is controlled by pure magnetite in all facies, despite significant amounts of hematite in the BAG subfacies. Microstructural observations show that in almost all sites, magnetic fabric correlates to magmatic state fabrics that are defined by a weak NE-SW orientation of mafic and felsic silicates. However, strain mechanisms in both subfacies of AG also exhibit evidence for solid-state deformation at high to moderate temperatures. Pegmatite dyke, strike slip fault (SFA-B-C), hydrothermal vein, normal fault (F1-2) and joint (J) structures were observed and their orientation and kinematics is consistent with the magmatic and solid-state structures. Dykes, SFA-C and F1, are usually orientated along the N70°E/40°N plane, which is nearly parallel to the strike of AMS and magmatic foliations. In contrast, veins, SFB, F2 and some J are oriented perpendicular to the N70°E trend. Kinematic analysis in these structures shows evidence for a dextral sense of movement in the system in the brittle regime. The coherent structural pattern for the three facies of Madeira granite suggests that the different facies form a nested pluton. The coherence in orientation and kinematics from magmatic to high-temperature solid-state, and into the brittle regime indicates the continuity in the stress regime from the last magmatic stages until the complete cooling of the pluton, likely along a NE-SW dextral corridor related to the regional deformation in the Uatumã-Anauá Domain of the Amazonian Craton.

Seismic imaging and hydrogeologic characterization of the Potomac Formation in northern New Castle County, Delaware

NASA Astrophysics Data System (ADS)

Zullo, Claudia Cristina

Water supply demands of a growing population in the Coastal Plain of Delaware make detailed understanding of aquifers increasingly important. Previous studies indicate that the stratigraphy of the non-marine Potomac Formation, which includes the most important confined aquifers in the area, is complex and lithologically heterogeneous, making sands difficult to correlate. This study aimed to delineate the stratigraphic architecture of these sediments with a focus on the sand bodies that provide significant volumes of groundwater to northern Delaware. This project utilized an unconventional seismic system, a land streamer system, for collecting near-surface, high-resolution seismic reflection data on unpaved and paved public roadways. To calibrate the 20 km of seismic data to lithologies, a corehole and wireline geophysical logs were obtained. Six lithofacies (paleosols, lake, frequently flooded lake/abandoned channel, splay/levee, splay channel, fluvial channel) and their respective geophysical log patterns were identified and then correlated with the seismic data to relate seismic facies to these environments. Using seismic attribute analysis, seismic facies that correspond to four of the lithofacies were identified: fluvial channel seismic facies, paleosol seismic facies, splay/levee seismic facies, and a frequently flooded lake/abandoned channel and splay/levee combined seismic facies. Correlations for eleven horizons identified in the seismic sections and cross sections show local changes in thickness and erosional relief. The analysis of seismic facies sections provides a two-dimensional basis for detailed understanding of the stratigraphy of the Potomac Formation, and suggests an anastomosing fluvial style with poorly connected winding channel sands encased in fine-grained overbank sediments that produced a complex, labyrinth-style heterogeneity. The results indicate that the 2D lateral connectivity of the sand bodies of the Potomac Formation is limited to short distances, contrary to correlations in previous studies that have indicated connection of sands at distances of at least 3 km. The results highlight the importance of integrating multiple sources of geologic information for the interpretation of the stratigraphic architecture of non-marine sediments, and the value of roadway-based land-streamer seismic data for the interpretation of near-surface (less than 300-m-depth) aquifer sand characteristics in developed areas.

Prelude of benthic community collapse during the end-Permian mass extinction in siliciclastic offshore sub-basin: Brachiopod evidence from South China

NASA Astrophysics Data System (ADS)

Wu, Huiting; He, Weihong; Weldon, Elizabeth A.

2018-04-01

Analysis of the Permian-Triassic palaeocommunities from basinal facies in South China provides an insight into the environmental deterioration occurring in the prelude to the mass extinction event. Quantitative and multivariate analyses on three brachiopod palaeocommunities from the Changhsingian to the earliest Triassic in basinal facies in South China have been undertaken in this study. Although the end-Permian extinction has been proved to be a one-stepped event, ecological warning signals appeared in the palaeocommunities long before the main pulse of the event. A brachiopod palaeocommunity turnover occurred in the upper part of the Clarkina changxingensis Zone, associated with a significant decrease of palaeocommunity diversity and brachiopod body size. During this turnover the dominant genera changed from Fusichonetes and Crurithyris (or/and Paracrurithyris) to the more competitive genus Crurithyris (or/and Paracrurithyris). The brachiopod palaeocommunity turnover was supposed to be triggered by the decreased marine primary productivity and increased volcanic activity. Moreover, such early warning signals are found not only in the deep-water siliceous facies, but also in the shallow-water clastic facies and carbonate rock facies in South China.

Eo-Ulrichian to Neo-Ulrichian views: The renaissance of "layer-cake stratigraphy"

USGS Publications Warehouse

Brett, Carlton E.; McLaughlin, P.I.; Baird, G.C.

2007-01-01

Classical notions of "layer-cake stratigraphy" have been denigrated as representing an antiquated "Neptunian" view of the geologic record with the American paleontologist-stratigrapher E.O. Ulrich vilified as its quintessential advocate. Some of the extreme "layer-cake" interpretations of E.O. Ulrich are demonstrably incorrect, especially where applied in marginal marine and terrestrial settings. However, close scrutiny of Ulrich's work suggests that the bulk was correct and demonstrated considerable insight for the time. Subsequent development of facies concepts revolutionized geologists' view of time-space relationships in stratigraphy, but rather than focusing on facies patterns within the established stratigraphic (layer-cake) frameworks many geologists in North America came to view strata as parts of diachronous facies mosaics. Recent advances in the development of event and sequence stratigraphic paradigms are beginning to swing the pendulum back the other way. Possible causes of "layer-cake" patterns are numerous and varied, including: (1) parallelism of depositional strike and outcrop belts, especially in foreland basins, (2) very widespread environmental belts developed in low-relief cratonic areas, (3) time-averaging homogenizes facies to a limited extent, resulting in a very subtle signature of lateral change, (4) condensed beds (hardgrounds, bone beds, ironstones, etc.) often form in responses to extrabasinal forces, thus they cross-cut facies, and (5) large events (i.e. hurricanes, floods, tsunamis, eruptions, etc.) are "over represented" in the rock record. A revised ("Neo-Ulrichian") layer-cake paradigm carries many of the original correct empirical observations of pattern, noted by Ulrich, recast in terms of event and sequence stratigraphy.

Pressure-temperature evolution of Neoproterozoic metamorphism in the Welayati Formation (Kabul Block), Afghanistan

NASA Astrophysics Data System (ADS)

Collett, Stephen; Faryad, Shah Wali

2015-11-01

The Welayati Formation, consisting of alternating layers of mica-schist and quartzite with lenses of amphibolite, unconformably overlies the Neoarchean Sherdarwaza Formation of the Kabul Block that underwent Paleoproterozoic granulite-facies and Neoproterozoic amphibolite-facies metamorphic events. To analyze metamorphic history of the Welayati Formation and its relations to the underlying Sherdarwaza Formation, petrographic study and pressure-temperature (P-T) pseudosection modeling were applied to staurolite- and kyanite-bearing mica-schists, which crop out to the south of Kabul City. Prograde metamorphism, identified by inclusion trails and chemical zonation in garnet from the micaschists indicates that the rocks underwent burial from around 6.2 kbar at 525 °C to maximum pressure conditions of around 9.5 kbar at temperatures of around 650 °C. Decompression from peak pressures under isothermal or moderate heating conditions are indicated by formation of biotite and plagioclase porphyroblasts which cross-cut and overgrow the dominant foliation. The lack of sillimanite and/or andalusite suggests that cooling and further decompression occurred in the kyanite stability field. The results of this study indicate a single amphibolite-facies metamorphism that based on P-T conditions and age dating correlates well with the Neoproterozoic metamorphism in the underlying Sherdarwaza Formation. The rocks lack any paragenetic evidence for a preceding granulite-facies overprint or subsequent Paleozoic metamorphism. Owing to the position of the Kabul Block, within the India-Eurasia collision zone, partial replacement of the amphibolite-facies minerals in the micaschist could, in addition to retrogression of the Neoproterozoic metamorphism, relate to deformation associated with the Alpine orogeny.

Sedimentary environment and diagenesis of the Lower Cretaceous Chaswood Formation, southeastern Canada: The origin of kaolin-rich mudstones

NASA Astrophysics Data System (ADS)

Pe-Piper, Georgia; Dolansky, Lila; Piper, David J. W.

2005-07-01

The Lower Cretaceous fluvial sandstone-mudstone succession of the Chaswood Formation is the proximal equivalent of offshore deltaic rocks of the Scotian Basin that are reservoirs for producing gas fields. This study interprets the mineralogical consequences of Cretaceous weathering and early diagenesis in a 130-m core from the Chaswood Formation in order to better understand detrital and diagenetic minerals in equivalent rocks offshore. Mineralogy was determined by X-ray diffraction, electron microprobe analysis and scanning electron microscopy. The rocks can be divided into five facies associations: light gray mudstone, dark gray mudstone, silty mudstone and muddy sandstone, sorted sandstone and conglomerate, and paleosols. Facies transitions in coarser facies are related to deposition in and near fluvial channels. In the mudstones, they indicate an evolutionary progression from the dark gray mudstone facies association (swamps and floodplain soils) to mottled paleosols (well-drained oxisols and ultisols following syntectonic uplift). Facies transitions and regional distribution indicate that the light gray mudstone facies association formed from early diagenetic oxidation and alteration of the dark gray mudstone facies association, probably by meteoric water. Principal minerals in mudstones are illite/muscovite, kaolinite, vermiculite and quartz. Illite/muscovite is of detrital origin, but variations in abundance show that it has altered to kaolinite in the light gray mudstone facies association and in oxisols. Vermiculite developed from the weathering of biotite and is present in ultisols. The earliest phase of sandstone cementation in reducing conditions in swamps and ponds produced siderite nodules and framboidal pyrite, which were corroded and oxidized during subsequent development of paleosols. Kaolinite is an early cement, coating quartz grains and as well-crystallized, pore-filling booklets that was probably synchronous with the formation of the light gray mudstone facies association. Later illite and barite cement indicate a source of abundant K and Ba from formation water. This late diagenesis of sandstone took place when the Chaswood Formation was in continuity with the main Scotian Basin, prior to Oligocene uplift of the eastern Scotian Shelf. Findings of this study are applicable to other mid-latitude Cretaceous weathering and early diagenetic environments.

Is cratonic sedimentation consistent with available models? An example from the Upper Proterozoic of the West African craton

NASA Astrophysics Data System (ADS)

Bertrand-Sarfati, Janine; Moussine-Pouchkine, Alexis

1988-08-01

The Atar Group, part of the Upper Proterozoic sequence covering the West African craton, stable since 2000 Ma, is characterized by an alternation of extensive carbonate beds and mixed siliciclastic and carbonate facies. The carbonate beds comprise essentially columnar stromatolite biostromes and bioherms which reflect sublittoral environments. The mixed facies contain a variety of laterally discontinuous facies which imply more variable environmental conditions. The settings of the mixed facies are not always clear but they do not contain thick sequences of high-energy facies. Few obvious facies sequences are discernable; those that are present are considered to be punctuated aggradational cycles (PACs) and they always start with biostromes of columnar stromatolites with very few sediments. Composite sequences are interpreted as due to shallowing upward or increasing energy environments that may be laterally contiguous, despite the fact that the contacts are not gradational. However, much of the stratigraphic sequence cannot be subdivided into cycles and seems to consist of unrelated individual facies, bound by sharp boundaries. The basin analysis reveals that biostromes of columnar stromatolites start after an instantaneous geological event corresponding to a sea-level rise. Consequently, their appearance can be considered as a time-line. We describe, in the Atar Group and its equivalents, three sedimentation trends, all of which are interpreted to be of shallowing upward character. The Atar Group appears to have been deposited in an epeiric sea (i.e. an extremely flat ramp). There are two contrasting styles of sedimentation: (1) after the submergence of the whole area, columnar stromatolites built extensive biostromes; (2) during the stable phase, sediments are deposited in a mosaic of laterally-discontinuous facies. Tidal influence cannot be recognized in the sequence, neither can a salinity increase toward the land; both common features in published epeiric sea models. A cratonic sedimentation area such as this is characterized by its size and flatness. Only during the stable phase of the cycle does small-scale topographic relief lead to deposition of a mosaic of facies. The sedimentation is storm- and wave-dominated.

High-resolution seismic-reflection interpretations of some sediment deposits, Antarctic continental margin: Focus on the western Ross Sea

USGS Publications Warehouse

Karl, Herman A.

1989-01-01

High-resolution seismic-reflection data have been used to a varying degree by geoscientists to interpret the history of marine sediment accumulations around Antarctica. Reconnaissance analysis of 1-, 3.5-, and 12-kHz data collected by the U.S. Geological Survey in the western Ross Sea has led to the identification of eight echo-character facies and six microtopographic facies in the sediment deposits that overlie the Ross Sea unconformity. Three depositional facies regions, each characterized by a particular assemblage of echo-character type and microtopographic facies, have been identified on the continental shelf. These suites of acoustic facies are the result of specific depositional processes that control type and accumulation of sediment in a region. Evidence of glacial processes and products is uncommon in regions 1 and 2, but is abundant in region 3. McMurdo Sound, region 1, is characterized by a monospecific set of acoustic facies. This unique assemblage probably represents turbidity current deposition in the western part of the basin. Most of the seafloor in region 2, from about latitude 77??S to 75??S, is deeper than 600 m below sealevel. The microtopographic facies and echo-character facies observed on the lower slopes and basin floor there reflect the thin deposits of pelagic sediments that have accumulated in the low-energy conditions that are typical of deep-water environments. In shallower water near the boundary with region 3, the signature of the acoustic facies is different from that in deeper water and probably indicates higher energy conditions or, perhaps, ice-related processes. Thick deposits of tills emplaced by lodgement during the most recent advance of the West Antarctic Ice Sheet are common from latitude 75??S to the northern boundary of the study area just south of Coulman Island (region 3). The signature of microtopographic facies in this region reflects the relief of the base of the grounded ice sheet prior to decoupling from the seafloor. Current winnowing and scour of shallow parts of the seafloor inhibits sediment deposition and maintains the irregular, hummocky relief that characterizes much of the region. Seafloor relief of this type in other polar areas could indicate the former presence of grounded ice. ?? 1989.

Application of different classification methods for litho-fluid facies prediction: a case study from the offshore Nile Delta

NASA Astrophysics Data System (ADS)

Aleardi, Mattia; Ciabarri, Fabio

2017-10-01

In this work we test four classification methods for litho-fluid facies identification in a clastic reservoir located in the offshore Nile Delta. The ultimate goal of this study is to find an optimal classification method for the area under examination. The geologic context of the investigated area allows us to consider three different facies in the classification: shales, brine sands and gas sands. The depth at which the reservoir zone is located (2300-2700 m) produces a significant overlap of the P- and S-wave impedances of brine sands and gas sands that makes discrimination between these two litho-fluid classes particularly problematic. The classification is performed on the feature space defined by the elastic properties that are derived from recorded reflection seismic data by means of amplitude versus angle Bayesian inversion. As classification methods we test both deterministic and probabilistic approaches: the quadratic discriminant analysis and the neural network methods belong to the first group, whereas the standard Bayesian approach and the Bayesian approach that includes a 1D Markov chain a priori model to constrain the vertical continuity of litho-fluid facies belong to the second group. The ability of each method to discriminate the different facies is evaluated both on synthetic seismic data (computed on the basis of available borehole information) and on field seismic data. The outcomes of each classification method are compared with the known facies profile derived from well log data and the goodness of the results is quantitatively evaluated using the so-called confusion matrix. The results show that all methods return vertical facies profiles in which the main reservoir zone is correctly identified. However, the consideration of as much prior information as possible in the classification process is the winning choice for deriving a reliable and physically plausible predicted facies profile.

Late Pleistocene sediments and fossils near the mouth of Mad River, Humboldt County, California: Facies analysis, sequence development, and possible age correlation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harvey, E.W.

Study of late Pleistocene-age sediments near the mouth of the Mad River revealed a sequence of nearshore marine and shallow bay deposits. This sequence, bounded by unconformities, is informally named the Mouth of Mad unit. The Mouth of mad unit can be divided into four distinct depositional facies at the study site. The lowest facies are the Nearshore Sand and Estuarine Mud, which lie unconformably on a paleosol. The sand facies grades upward into a high-energy, interbedded Nearshore Sand and Gravel facies containing storm and rip-channel deposits. Above the sand and gravel is a Strand-Plain Sand facies. This sand ismore » overlain by a laterally variable sequence of shell-rich Bay facies. The bay deposits can be further divided into five subfacies: (1) a Bioturbated Sand; (2) a Lower Tidal Flat Mud; (3) a Mixed Sand and Mud; (4) an oyster-rich Bay Mud; and (5) an Upper Tidal Flat Mud. The bay sequence is overlain unconformably by younger late Pleistocene-age marine terrace deposits. The depositional environments represented by these facies progress from a shoreline estuary to nearshore deposits, above storm wave base, and slowly back to shoreline and finally shallow bay conditions. The Mouth of Mad unit represents a transgressive-regressive sequence, involving the development of a protective spit. The uppermost mud within the Mouth of Mad unit has been dated, using thermoluminescence age estimation, at 176 [+-] 33 ka, placing it in the late Pleistocene. The Mouth of Mad unit appears to be younger than the fossiliferous deposits at Elk Head, Crannell Junction, Trinidad Head, Moonstone Beach, and the Falor Formation near Maple Creek, and possibly time equivalent with gravel deposits exposed at the western end of School Road in McKinleyville.« less

Facies architecture of a Triassic rift-related Silicic Volcano-Sedimentary succession in the Tethyan realm, Peonias subzone, Vardar (Axios) Zone, northern Greece; Regional implications

NASA Astrophysics Data System (ADS)

Asvesta, Argyro; Dimitriadis, Sarantis

2010-06-01

In northern Greece, along the western edge of the Paleozoic Vertiscos terrane (Serbomacedonian massif) and within the Peonias subzone - the eastern part of the Vardar (Axios) Zone - a Silicic Volcano-Sedimentary (SVS) succession of Permo(?)-Skythian to Mid Triassic age records the development of a faulted continental margin and the formation of rhyolitic volcanoes along a continental shelf fringed by neritic carbonate accumulations. It represents the early rifting extensional stages that eventually led to the opening of the main oceanic basin in the western part of the Vardar (Axios) Zone (the Almopias Oceanic Basin). Even though the SVS succession is deformed, altered, extensively silicified and metamorphosed in the low greenschist facies, primary textures, original contacts and facies relationships are recognized in some places allowing clues for the facies architecture and the depositional environment. Volcanic and sedimentary facies analysis has been carried out at Nea Santa and Kolchida rhyolitic volcanic centres. Pyroclastic facies, mostly composed of gas-supported lapilli tuffs and locally intercalated accretionary lapilli tuffs, built the early cones which were then overridden by rhyolitic aphyric and minor K-feldspar-phyric lava flows. The characteristics of facies, especially the presence of accretionary lapilli, imply subaerial to coastal emplacement at this early stage. The mature and final stages of volcanism are mostly represented by quartz-feldspar porphyry intrusions that probably occupied the vents. At Nea Santa area, the presence of resedimented hyaloclastite facies indicates subaqueous emplacement of rhyolitic lavas and/or lobes. Moreover, quartz-feldspar-phyric sills and a partly extrusive dome featuring peperites at their margins are inferred to have intruded unconsolidated, wet carbonate sediments of the overlying Triassic Neritic Carbonate Formation, in a shallow submarine environment. The dome had probably reached above wave-base as is indicated by the presence of reworked rhyolitic clasts in the younger mixed rhyolite-carbonate epiclastic sedimentary facies. This facies is interpreted as mass- and debris-flow of mixed provenance, deposited below wave-base. The facies architecture of the SVS succession records a change in volcanic activity from explosive to effusive and then to intrusive. The depositional environment changed from subaerial-coastal to shallow submarine as the silicic volcanism evolved and carbonate sedimentation was progressively taking over, probably compensating for the gradual subsidence of the corresponding basin. Silicic magmatism and carbonate sedimentation were contemporaneous and spatially related. The timing of the rifting, the continental crustal elements involved and the accompanying tectonic, magmatic and sedimentary processes are features of the spatially and temporally evolving western peri-Tethyan region.

Nickel and cobalt distribution in the laterites of the Lomié region, south-east Cameroon

NASA Astrophysics Data System (ADS)

Yongue-Fouateu, R.; Ghogomu, R. T.; Penaye, J.; Ekodeck, G. E.; Stendal, H.; Colin, F.

2006-05-01

In the Lomié region (south-east Cameroon), strong weathering of serpentinized ultramafic rocks has produced a thick laterite cover with significant nickel and cobalt contents. The highest concentrations of these elements are located in the middle section of the laterite profiles, in the lower clay horizon, and preferentially along the slopes of the interfluves. The investigation of the composition of the laterite ores (by whole-rock analysis) and of the main components, using SEM/microprobe and XRD, reveals the presence of four main enriched facies: a non-differentiated facies, a layered smectitic facies, a quartz-rich facies and a gibbsitic nodular facies. Nickel, with generally low concentrations (less than 2% NiO), is hosted by several secondary mineral phases (goethite, Mn-oxyhydroxides and smectite locally). Cobalt is generally of higher grade (up to 0.9% CoO), and is associated with cryptocrystalline and crystallized Mn-oxyhydroxides. SEM/microprobe observations suggest that nickel and cobalt concentration in secondary minerals is due to repeated remobilization. This has also favored the formation of mineral phases, of which the best crystallized and most richly mineralized are mainly those of the asbolan-lithiophorite group. The SEM studies indicate that these mineral phases show various morphologies related to their chemical composition: poorly crystallized nipple shaped (Fe, Mn, Ni), fine cross-bedded needles (Mn, Ni) and elongated crystals (Mn, Al, Ni, Co) occur in the layered smectitic facies, while platy and needle-like forms (Mn, Al, Ni, Co) characterize the gibbsitic nodular facies. The predominantly cobaltiferous nature of the Lomié laterite ore deposit is the result of remobilizations and transformations of elements that led to the impoverishment of both the Ni-Co contents of the laterite but most importantly of Ni rather than Co.

Source versus depositional controls on sandstone composition in a foreland basin: The El Imperial Formation (Mid Carboniferous-Lower Permian), San Rafael basin, western Argentina

DOE Office of Scientific and Technical Information (OSTI.GOV)

Espejo, E.S.; Lopez-Gamundi, O.R.

1994-01-01

The El Imperial Formation (mid-Carboniferous-Lower Permian) constitutes a progradational sandstone-rich succession deposited in the San Rafael foreland basin of western Argentina. Four facies associations have been identified: a basal glacial marine association, a shallow marine association, a deltaic association, and an uppermost fluvial association. Sand-prone deposits in the deltaic association, a shallow marine association, a deltaic association, and an uppermost fluvial association. Sand-prone deposits in the deltaic association are represented by prodelta and delta-front shales and subordinate fine sandstones (Facies A), deltaic platform, wave-reworked channel mouth-bar sandstones (Facies B), and fluvial-dominated distributary channel sandstones (Facies C). Analysis of framework grainsmore » of sandstone samples from Facies B and C shows two distinct mineral assemblages or petrofacies. The quartzose petrofacies is characterized by high contents of quartz and low percentages of feldspar and lithic grains. The quartzolithic petrofacies shows an increase in labile components, in particular lithic fragments, and a concomitant decrease in quartz. The quartzolithic petrofacies shows a source signature. Average detrital modes of sandstones from this petrofacies are similar to those from overlying fluvial sandstones. All wave-reworked, channel mouth-bar sandstones (Facies B) correspond compositionally to the quartzose petrofacies, whereas detrital modes from the distributary-channel sandstones (Facies C) fall into the quartzolithic petrofacies. This correspondence between depositional environment and petrofacies suggests a strong depositional influence on composition (depositional signature). Abrasion (mechanical breakdown) by wave action in shallow marine environments accounts for the quartz-rich nature and paucity of labile grains in the quartzose petrofacies.« less

Environmental Transitions Recorded by Fluvial Fan Stratigraphy at Dingo Gap and Moonlight Valley, Gale Crater, Mars

NASA Astrophysics Data System (ADS)

Edgar, L. A.; Gupta, S.; Rubin, D. M.; Schieber, J.; Stack, K.; Lewis, K. W.

2016-12-01

The Mars Science Laboratory (MSL) Curiosity rover investigated a number of sedimentary outcrops across Aeolis Palus. Observations of conglomerates, cross-bedded sandstones, and mudstones suggest that fluvial and lacustrine environments were common. Outcrops that expose cross-sections are particularly helpful for identifying stratigraphic relationships and changes through time. In the vicinity of an outcrop informally named Dingo Gap, the drive strategy shifted from driving on the topographic high areas to the topographic low areas, which resulted in a unique vantage point to observe stratigraphy in cross-section. During Sols 513-541, Curiosity investigated 4 m of stratigraphy exposed at Dingo Gap and Moonlight Valley. The valley walls reveal five distinct sedimentary facies, including 1) a fine-grained evenly laminated facies interpreted as upper plane bed stratification, 2) ripple and dune cross-stratified sandstone facies, interpreted to represent the southward migration of subaqueous bedforms, 3) fully preserved bedform sandstone facies, formed during high rates of deposition, 4) planar-bedded granule-rich sandstone facies, interpreted as sheet flood deposits, and 5) a weakly stratified, poorly-sorted conglomerate facies, interpreted to represent rapid deposition from a high-energy fluvial flow. The conglomerate facies is unlike other conglomerates observed thus far in the mission, on the basis of both texture and chemistry. Analysis of conglomerates reveal that they occur as distinct channel bodies, incised into cross-stratified sandstones. This coarsening upward signature is interpreted to record a prograding fan succession. Channel bodies appear to be time-equivalent, which suggests a major change in the system, likely associated with a drop in base level. The unique viewing geometry offered by Dingo Gap and Moonlight Valley makes it possible to observe these environmental changes.

Depositional environment and sedimentary of the basinal sediments in the Eibiswalder Bucht (Radl Formation and Lower Eibiswald Beds), Miocene Western Styrian Basin, Austria

NASA Astrophysics Data System (ADS)

Stingl, K.

1994-12-01

The Eibiswald Bucht is a small subbasin of the Western Styrian Basin exposing sediments of Lower Miocene age. In the past the entire sequence exposed in the Eibiswalder Bucht has been interpreted as being of fluvial/lacustrine origin; here, results are presented of detailed sedimentological investigations that lead to a revision of this concept. The lowermost siliciclastic sedimentary unit of the Eibiswalder Bucht sequence is the Radl Formation. It is overlain by the Eibiswald Beds, which are subdivided into the Lower, Middle and Upper Eibiswald Beds. The Radl Formation and the Lower Eibiswald Beds are interpreted as a fan delta complex deposited along NNW-SSE striking faults. Based on the sedimentary facies this fan delta can be subdivided into a subaerial alluvial fan facies group, a proximal delta facies group and a distal delta/prodelta facies group. The Radl Formation comprises the alluvial fan and proximal delta facies groups, the Lower Eibiswald Beds the distal delta/prodelta facies group. The alluvial fan and the proximal delta consist of diverse deposits of gravelly flows. The distal delta/prodelta consists of wave-reworked, bioturbated, low density turbidites intercalated with minor gravelly mass flows. The prodelta can be regarded as as the basin facies of the small and shallow Eibiswalder Bucht, where marine conditions prevailed. The basin was probably in part connected with the Eastern Styrian Basin, the contemporary depositional environment of the Styrian Schlier (mainly turbiditic marine offshore sediments in the Eastern Styrian Basin). Analysis of the clast composition, in conjunction with the paleotransport direction of the coarse delta mass flows of the Radl Formation, shows that the source rocks were exclusively crystalline rocks ranging from greenschists to eclogites.

Quantitative analysis of ground penetrating radar data in the Mu Us Sandland

NASA Astrophysics Data System (ADS)

Fu, Tianyang; Tan, Lihua; Wu, Yongqiu; Wen, Yanglei; Li, Dawei; Duan, Jinlong

2018-06-01

Ground penetrating radar (GPR), which can reveal the sedimentary structure and development process of dunes, is widely used to evaluate aeolian landforms. The interpretations for GPR profiles are mostly based on qualitative descriptions of geometric features of the radar reflections. This research quantitatively analyzed the waveform parameter characteristics of different radar units by extracting the amplitude and time interval parameters of GPR data in the Mu Us Sandland in China, and then identified and interpreted different sedimentary structures. The results showed that different types of radar units had specific waveform parameter characteristics. The main waveform parameter characteristics of sand dune radar facies and sandstone radar facies included low amplitudes and wide ranges of time intervals, ranging from 0 to 0.25 and 4 to 33 ns respectively, and the mean amplitudes changed gradually with time intervals. The amplitude distribution curves of various sand dune radar facies were similar as unimodal distributions. The radar surfaces showed high amplitudes with time intervals concentrated in high-value areas, ranging from 0.08 to 0.61 and 9 to 34 ns respectively, and the mean amplitudes changed drastically with time intervals. The amplitude and time interval values of lacustrine radar facies were between that of sand dune radar facies and radar surfaces, ranging from 0.08 to 0.29 and 11 to 30 ns respectively, and the mean amplitude and time interval curve was approximately trapezoidal. The quantitative extraction and analysis of GPR reflections could help distinguish various radar units and provide evidence for identifying sedimentary structure in aeolian landforms.

Ultra-Wideband Radiometry Remote Sensing of Polar Ice Sheet Temperature Profile, Sea Ice and Terrestrial Snow Thickness: Forward Modeling and Data Analysis

NASA Astrophysics Data System (ADS)

Tsang, L.; Tan, S.; Sanamzadeh, M.; Johnson, J. T.; Jezek, K. C.; Durand, M. T.

2017-12-01

The recent development of an ultra-wideband software defined radiometer (UWBRAD) operating over the unprotected spectrum of 0.5 2.0 GHz using radio-frequency interference suppression techniques offers new methodologies for remote sensing of the polar ice sheets, sea ice, and terrestrial snow. The instrument was initially designed for remote sensing of the intragalcial temperature profile of the ice sheet, where a frequency dependent penetration depth yields a frequency dependent brightness temperature (Tb) spectrum that can be linked back to the temperature profile of the ice sheet. The instrument was tested during a short flight over Northwest Greenland in September, 2016. Measurements were successfully made over the different snow facies characteristic of Greenland including the ablation, wet snow and percolation facies, and ended just west of Camp Century during the approach to the dry snow zone. Wide-band emission spectra collected during the flight have been processed and analyzed. Results show that the spectra are highly sensitive to the facies type with scattering from ice lenses being the dominant reason for low Tbs in the percolation zone. Inversion of Tb to physical temperature at depth was conducted on the measurements near Camp Century, achieving a -1.7K ten-meter error compared to borehole measurements. However, there is a relatively large uncertainty in the lower part possibly due to the large scattering near the surface. Wideband radiometry may also be applicable to sea ice and terrestrial snow thickness retrieval. Modeling studies suggest that the UWBRAD spectra reduce ambiguities inherent in other sea ice thickness retrievals by utilizing coherent wave interferences that appear in the Tb spectrum. When applied to a lossless medium such as terrestrial snow, this coherent oscillation turns out to be the single key signature that can be used to link back to snow thickness. In this paper, we report our forward modeling findings in support of instrument development and data analysis. The effects of density fluctuations and layered roughness are examined using a partially coherent model; we also report the results of applying such models to analyze the UWBRAD Greenland data. The approach of combining active L- band observations from PALSAR with UWBRAD Tb spectra is also discussed.

Peritidal cyclic sedimentation from La Manga Formation (Oxfordian), Neuquén Basin, Mendoza, Argentina

NASA Astrophysics Data System (ADS)

Palma, Ricardo M.; Kietzmann, Diego A.; Bressan, Graciela S.; Martín-Chivelet, Javier; López-Gómez, José; Farias, María E.; Iglesias Llanos, María P.

2013-11-01

The La Manga Formation consists of marine carbonates and represents most of the sedimentary record of the Callovian-Oxfordian in the Neuquén Basin. Three localities in the southern Mendoza province were studied and their cyclicity was determined by means of facies analysis and their vertical arrangement. Facies of inner ramp, that were deposited in extremely shallow-water environments with intermittent subaerial exposures have been broken down into shallow subtidal, and intertidal-supratidal environments. Shallow subtidal facies are arranged into decimetre scale upward-shallowing cycles composed of marls, laminated or massive mudstones or bioclastic wackestones and intraclastic wackestone-packstones. Intertidal-supratidal centimetre-scale cycles consist of an upward-shallowing succession of restricted facies, overlaid by horizontal or crinkle microbial laminites, flat pebble conglomerates or breccias beds. The defined cycles show a shallowing upward trend in which the evidence of relative sea-level lowering is accepted. The interpretation of Fischer plots allowed the recognition of changes in accommodation space.

Spectral analysis of time series of categorical variables in earth sciences

NASA Astrophysics Data System (ADS)

Pardo-Igúzquiza, Eulogio; Rodríguez-Tovar, Francisco J.; Dorador, Javier

2016-10-01

Time series of categorical variables often appear in Earth Science disciplines and there is considerable interest in studying their cyclic behavior. This is true, for example, when the type of facies, petrofabric features, ichnofabrics, fossil assemblages or mineral compositions are measured continuously over a core or throughout a stratigraphic succession. Here we deal with the problem of applying spectral analysis to such sequences. A full indicator approach is proposed to complement the spectral envelope often used in other disciplines. Additionally, a stand-alone computer program is provided for calculating the spectral envelope, in this case implementing the permutation test to assess the statistical significance of the spectral peaks. We studied simulated sequences as well as real data in order to illustrate the methodology.

Quantitative allochem compositional analysis of Lochkovian-Pragian boundary sections in the Prague Basin (Czech Republic)

NASA Astrophysics Data System (ADS)

Weinerová, Hedvika; Hron, Karel; Bábek, Ondřej; Šimíček, Daniel; Hladil, Jindřich

2017-06-01

Quantitative allochem compositional trends across the Lochkovian-Pragian boundary Event were examined at three sections recording the proximal to more distal carbonate ramp environment of the Prague Basin. Multivariate statistical methods (principal component analysis, correspondence analysis, cluster analysis) of point-counted thin section data were used to reconstruct facies stacking patterns and sea-level history. Both the closed-nature allochem percentages and their centred log-ratio (clr) coordinates were used. Both these approaches allow for distinguishing of lowstand, transgressive and highstand system tracts within the Praha Formation, which show gradual transition from crinoid-dominated facies deposited above the storm wave base to dacryoconarid-dominated facies of deep-water environment below the storm wave base. Quantitative compositional data also indicate progradative-retrogradative trends in the macrolithologically monotonous shallow-water succession and enable its stratigraphic correlation with successions from deeper-water environments. Generally, the stratigraphic trends of the clr data are more sensitive to subtle changes in allochem composition in comparison to the results based on raw data. A heterozoan-dominated allochem association in shallow-water environments of the Praha Formation supports the carbonate ramp environment assumed by previous authors.

Stratigraphy and depositional environments of the Lower Mississippian Joana Limestone in southern White Pine and northern Lincoln Counties, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilmore, T.J.

1990-04-01

The Lower Mississippian Joana Limestone in the southern Schell Creek and Egan ranges of east-central Nevada is composed of three depositional facies: the unbedded wackestone with grainstone/packstone facies or Facies 1; the bedded wackestone with mudstone facies or Facies 2; and the restricted wackestone, mudstone/shale facies, or Facies 3. Facies 1 is characterized by Waulsortian-type carbonate buildups with massive unbedded wackestone cores, grainstone flanking beds and grainstone/packstone capping units. Facies 2 is characterized by an upward progression of sedimentary bedding types from thinly laminated to large scale trough cross-bedding that indicates a shoaling upward of this facies. Facies 3 ismore » characterized by sparse wackestones, mudstones, and shale which show a decrease in both faunal types and diversity and an increase in fine clastics. The restricted wackestone, mudstone/shale facies grades upward into the Mississippian Chainman Shale. The age of the Joana Limestone is confirmed as late Kinderhookian to early Osagean based primarily on conodonts and foraminifera. In the middle beds of the Joana Limestone, the previously unreported upper Siphonodella crenulata conodont zone occurs which helps correlate the Joana Limestone with regional transgressive/regressive sea level events. Color alteration indices of these conodonts are 1.5 to 2, and occur in the oil generation window. Additionally, oil staining was observed in numerous samples located primarily in the lower half of the formation, represented by Facies 3, the unbedded wackestone with grainstone/packstone facies.« less

Predicted seafloor facies of Central Santa Monica Bay, California

USGS Publications Warehouse

Dartnell, Peter; Gardner, James V.

2004-01-01

Summary -- Mapping surficial seafloor facies (sand, silt, muddy sand, rock, etc.) should be the first step in marine geological studies and is crucial when modeling sediment processes, pollution transport, deciphering tectonics, and defining benthic habitats. This report outlines an empirical technique that predicts the distribution of seafloor facies for a large area offshore Los Angeles, CA using high-resolution bathymetry and co-registered, calibrated backscatter from multibeam echosounders (MBES) correlated to ground-truth sediment samples. The technique uses a series of procedures that involve supervised classification and a hierarchical decision tree classification that are now available in advanced image-analysis software packages. Derivative variance images of both bathymetry and acoustic backscatter are calculated from the MBES data and then used in a hierarchical decision-tree framework to classify the MBES data into areas of rock, gravelly muddy sand, muddy sand, and mud. A quantitative accuracy assessment on the classification results is performed using ground-truth sediment samples. The predicted facies map is also ground-truthed using seafloor photographs and high-resolution sub-bottom seismic-reflection profiles. This Open-File Report contains the predicted seafloor facies map as a georeferenced TIFF image along with the multibeam bathymetry and acoustic backscatter data used in the study as well as an explanation of the empirical classification process.

Members of the Toroweap and Kaibab formations, Lower Permian, northern Arizona and southern Utah

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorauf, J.E.; Billingsley, G.H.

1991-01-01

The Toroweap Formation consists of, in ascending order, the Seligman, Brady Canyon, and Woods Ranch members. The Seligman Member, whose type section is near Seligman, Arizona, consists chiefly of pale-red and reddish- to yellowish-brown, fine-grained, calcareous sandstone and, in places, gypsum and dolomite. The Brady Canyon Member is composed of fossiliferous marine limestone, in part cherty. The Woods Ranch Member consists of dolomite, gypsum, and siltstone and, in part, fossiliferous limestone. All three members of the Toroweap change facies eastward from the western Grand Canyon area: the Seligman grades into fine-grained, crossbedded sandstone; the Brady Canyon into sandstone and dolomiticmore » sandstone; and the Woods Ranch into dolomitic sandstone. Because of these facies changes, the members are unrecognizable east of a line running roughly north-south from west of Page, Arizona, to west of Flagstaff, Arizona. East of these areas, the term sandstone facies of the Toroweap Formation is used. The Kaibab Formation consists of the Fossil mountain Member below and the Harrisburg Member above. The Fossil Mountain Member consists of light-gray, thick-bedded, cherty and sandy limestone. It grades eastward into sandstone and calcareous sandstone. The Harrisburg Member consists of light-red to light-gray gypsum, limestone, and dolomite and lesser amounts of red and gray siltstone and sandstone. It merges with the calcareous sandstone facies of the Fossil Mountain east of a line running roughly north-south from near Page to east and south of Flagstaff. The term Kaibab Formation is here applied to the sandstone and calcareous sandstone facies of the Kaibab east of this line.« less

Distribution and tectonic implications of Cretaceous-Quaternary sedimentary facies in Solomon Islands

NASA Astrophysics Data System (ADS)

Turner, C. C.; Hughes, G. W.

1982-08-01

Sedimentary rocks of the Solomon Islands-Bougainville Arc are described in terms of nine widespread facies. Four facies associations are recognised by grouping facies which developed in broadly similar sedimentary environments. A marine pelagic association of Early Cretaceous to Miocene rocks comprises three facies. Facies Al: Early Cretaceous siliceous mudstone, found only on Malaita, is interpreted as deep marine siliceous ooze. Facies A2: Early Cretaceous to Eocene limestone with chert, overlies the siliceous mudstone facies, and is widespread in the central and eastern Solomons. It represents lithified calcareous ooze. Facies A3: Oligocene to Miocene calcisiltite with thin tuffaceous beds, overlies Facies A2 in most areas, and also occurs in the western Solomons. This represents similar, but less lithified calcareous ooze, and the deposits of periodic andesitic volcanism. An open marine detrital association of Oligocene to Recent age occurs throughout the Solomons. This comprises two facies. Facies B1 is variably calcareous siltstone, of hemipelagic origin; and Facies B2 consists of volcanogenic clastic deposits, laid down from submarine mass flows. A third association, of shallow marine carbonates, ranges in age from Late Oligocene to Recent. Facies C1 is biohermal limestone, and Facies C2 is biostromal calcarenite. The fourth association comprises areally restricted Pliocene to Recent paralic detrital deposits. Facies D1 includes nearshore clastic sediments, and Facies D2 comprises alluvial sands and gravels. Pre-Oligocene pelagic sediments were deposited contemporaneously with, and subsequent to, the extrusion of oceanic tholeiite. Island arc volcanism commenced along the length of the Solomons during the Oligocene, and greatly influenced sedimentation. Thick volcaniclastic sequences were deposited from submarine mass flows, and shallow marine carbonates accumulated locally. Fine grained graded tuffaceous beds within the marine pelagic association are interpreted as products of this volcanism, suggesting that the Santa Isabel-Malaita-Ulawa area, where these beds are prevalent, was relatively close to the main Solomons chain at this time. A subduction zone may have dipped towards the northeast beneath this volcanic chain. Pliocene to Pleistocene calcalkaline volcanism and tectonism resulted in the emergence of all large islands and led to deposition of clastic and carbonate facies in paralic, shallow and deep marine environments.

Sedimentary conditions of Upper Permian volcano-clastic rocks of Ayan-Yrahskiy anticlinorium (Verhoyansk-Kolyma orogen)

NASA Astrophysics Data System (ADS)

Astakhova, Anna; Khardikov, Aleksandr

2013-04-01

Sedimentation conditions of upper Permian volcano-clastic rocks of Ayan-Yurakhsky anticlinorium are the reason of discussions between researchers. It is important to correctly solve this problem. Investigation allows us to conclude that upper Permian sediments was formed due to high rate deltaic sedimentation on shelf and continental slope of epicontinental sea basin. More than 45 outcrops of upper Permian sediments were described within Ayan-Yurakhsky anticlinorium. Termochemical and X-ray phase, lithological facies, stadial, paleogeographic and others were applied. Investigation allows to classify following types: tuffs, tuffites of andesites, andesi-dacites, sandstone tuffs, siltstone tuffs and claystone tuffs. Two facies were deliniated in the research area: 1) delta channel facies 2) epicontinental sea shelf edge and continental slope. Delta channel facies are located on the south-west part of Aian-Yrahskiy anticlinorium. It is composed of silty packsand and psammitic tuff-siltstone alternation and gravel-psammitic andesi-dacitic tuffute and tuff-breccia bands. Sediments have cross-bedding, through cross-bedding, curvilinear lamination structures. Facies occurred during high rate deltaic sedimentation on the shelf of epicontinental sea. Epicontinental sea shelf edge and continental slope facies are located on the south-west part. Sediments are represented by large thickness tuff-siltstone with tuff-sandstone, tuff-madstone, tuff, tuffite bands and lenses. Large number of submarine landslides sediments provide evidence that there was high angle sea floore environment. 30-50 m diametr eruption centers were described by authors during geological traverses. They are located in Kulu river basin. Their locations are limited by deep-seated pre-ore fault which extended along Ayan-Yurakhsky anticlinorium. U-Pb SHRIMP method showed that the average age of circons, taken from eruption centers, is Permian (256,3±3,7 ma). This fact confirms our emphasis that eruption centers were the centre of underwater effusive explosions which had been occurred in late Permian time. Gold ore deposits mainly localized in the south of Ayan-Yurakhsky anticlinorium and associated with upper Permian deltaic facies sediments. Taking into account lithological facies feature and volcanoclastic origin of sediments it is reasonable to suggest expelled-catagenesis model of gold mineralization. Gold was entered in sedimentary basin with piroclastic material. During catagenesis stage gold migrated from complex of shelf edge and continental slope to fan delta front complex in conjunction with expelled water. The emplacement of ore gold deposits related with upper Permian sediments can be successfully predicted, using this model and associated techniques.

Human Centered Hardware Modeling and Collaboration

NASA Technical Reports Server (NTRS)

Stambolian Damon; Lawrence, Brad; Stelges, Katrine; Henderson, Gena

2013-01-01

In order to collaborate engineering designs among NASA Centers and customers, to in clude hardware and human activities from multiple remote locations, live human-centered modeling and collaboration across several sites has been successfully facilitated by Kennedy Space Center. The focus of this paper includes innovative a pproaches to engineering design analyses and training, along with research being conducted to apply new technologies for tracking, immersing, and evaluating humans as well as rocket, vehic le, component, or faci lity hardware utilizing high resolution cameras, motion tracking, ergonomic analysis, biomedical monitoring, wor k instruction integration, head-mounted displays, and other innovative human-system integration modeling, simulation, and collaboration applications.

Marine habitat mapping of the Milford Haven Waterway, Wales, UK: Comparison of facies mapping and EUNIS classification for monitoring sediment habitats in an industrialized estuary

NASA Astrophysics Data System (ADS)

Carey, Drew A.; Hayn, Melanie; Germano, Joseph D.; Little, David I.; Bullimore, Blaise

2015-06-01

A detailed map and dataset of sedimentary habitats of the Milford Haven Waterway (MHW) was compiled for the Milford Haven Waterway Environmental Surveillance Group (MHWESG) from seafloor images collected in May, 2012 using sediment-profile and plan-view imaging (SPI/PV) survey techniques. This is the most comprehensive synoptic assessment of sediment distribution and benthic habitat composition available for the MHW, with 559 stations covering over 40 km2 of subtidal habitats. In the context of the MHW, an interpretative framework was developed that classified each station within a 'facies' that included information on the location within the waterway and inferred sedimentary and biological processes. The facies approach provides critical information on landscape-scale habitats including relative location and inferred sediment transport processes and can be used to direct future monitoring activities within the MHW and to predict areas of greatest potential risk from contaminant transport. Intertidal sediment 'facies' maps have been compiled in the past for MHW; this approach was expanded to map the subtidal portions of the waterway. Because sediment facies can be projected over larger areas than individual samples (due to assumptions based on physiography, or landforms) they represent an observational model of the distribution of sediments in an estuary. This model can be tested over time and space through comparison with additional past or future sample results. This approach provides a means to evaluate stability or change in the physical and biological conditions of the estuarine system. Initial comparison with past results for intertidal facies mapping and grain size analysis from grab samples showed remarkable stability over time for the MHW. The results of the SPI/PV mapping effort were cross-walked to the European Nature Information System (EUNIS) classification to provide a comparison of locally derived habitat mapping with European-standard habitat mapping. Cross-walk was conducted by assigning each facies (or group of facies) to a EUNIS habitat (Levels 3 or 5) and compiling maps comparing facies distribution with EUNIS habitat distribution. The facies approach provides critical information on landscape-scale habitats including relative location and inferred sediment transport processes. The SPI/PV approach cannot consistently identify key species contained within the EUNIS Level 5 Habitats. For regional planning and monitoring efforts, a combination of EUNIS classification and facies description provides the greatest flexibility for management of dynamic soft-bottom habitats in coastal estuaries. The combined approach can be used to generate and test hypotheses of linkages between biological characteristics (EUNIS) and physical characteristics (facies). This approach is practical if a robust cross-walk methodology is developed to utilize both classification approaches. SPI/PV technology can be an effective rapid ground truth method for refining marine habitat maps based on predictive models.

The variation of polar firn subject to percolation - characterizing processes and glacier mass budget uncertainty using high-resolution instruments

NASA Astrophysics Data System (ADS)

Demuth, M. N.; Marshall, H.; Morris, E. M.; Burgess, D. O.; Gray, L.

2009-12-01

As the Earth's glaciers and ice sheets are subjected to the effects of recent and predicted warming, the distribution of their glaciological facies zones will alter. Percolation and wet snow facies zones will, in general, move upwards; encroaching upon, for some glacier configurations, regions of dry snow facies. Meltwater percolation and internal accumulation processes that characterize these highly variable facies may confound reliable estimates of surface mass budgets based on traditional point measurements alone. If the extents of these zones are indeed increasing, as has been documented through recent analysis of QuickScat data for the ice caps of the Canadian Arctic, then the certainty of glacier mass budget estimates using traditional techniques may be degraded to an as yet un-quantified degree. Indeed, the application of remote sensing, in particular that utilizing repeat altimetry to retrieve surface mass budget estimates, is also subject to the complexity of glacier facies from the standpoint of their near-surface stratigraphy, density variations and rates of compaction. We first review the problem of measuring glacier mass budgets in the context of nested scales of variability, where auto-correlation structure varies with the scale of observation. We then consider specifically firn subject to percolation and describe the application of high-resolution instruments to characterize variability at the field-scale. The data collected include measurements of micro-topography, snow hardness, and snow density and texture; retrieved using airborne scanning lidar, a snow micro-penetrometer, neutron probe and ground-penetrating radars. The analysis suggests corresponding scales of correlation as it concerns the influence of antecedent conditions (surface roughness and hardness, and stratigraphic variability) and post-depositional processes (percolation and refreezing of surface melt water).

Geologically based model of heterogeneous hydraulic conductivity in an alluvial setting

NASA Astrophysics Data System (ADS)

Fogg, Graham E.; Noyes, Charles D.; Carle, Steven F.

Information on sediment texture and spatial continuity are inherent to sedimentary depositional facies descriptions, which are therefore potentially good predictors of spatially varying hydraulic conductivity (K). Analysis of complex alluvial heterogeneity in Livermore Valley, California, USA, using relatively abundant core descriptions and field pumping-test data, demonstrates a depositional-facies approach to characterization of subsurface heterogeneity. Conventional textural classifications of the core show a poor correlation with K; however, further refinement of the textural classifications into channel, levee, debris-flow, and flood-plain depositional facies reveals a systematic framework for spatial modeling of K. This geologic framework shows that most of the system is composed of very low-K flood-plain materials, and that the K measurements predominantly represent the other, higher-K facies. Joint interpretation of both the K and geologic data shows that spatial distribution of K in this system could not be adequately modeled without geologic data and analysis. Furthermore, it appears that K should not be assumed to be log-normally distributed, except perhaps within each facies. Markov chain modeling of transition probability, representing spatial correlation within and among the facies, captures the relevant geologic features while highlighting a new approach for statistical characterization of hydrofacies spatial variability. The presence of fining-upward facies sequences, cross correlation between facies, as well as other geologic attributes captured by the Markov chains provoke questions about the suitability of conventional geostatistical approaches based on variograms or covariances for modeling geologic heterogeneity. Résumé Les informations sur la texture des sédiments et leur continuité spatiale font partie des descriptions de faciès sédimentaires de dépôt. Par conséquent, ces descriptions sont d'excellents prédicteurs potentiels des variations spatiales de la conductivité hydraulique (K). L'analyse de l'hétérogénéité des alluvions complexes de la vallée de Livermore (Californie, États-Unis), sur la base de descriptions de carottes relativement nombreuses et de données d'essais de pompage, montre que l'hétérogénéité souterraine peut être caractérisée par une approche des faciès de dépôt. Des classifications conventionnelles de la texture de la carotte montrent une corrélation médiocre avec K; toutefois, une amélioration ultérieure des classifications de texture en faciès de dépôt de chenal, de levée d'inondation, de coulée boueuse et de plaine d'inondation a fourni un cadre systématique pour une modélisation spatiale de K. Ce cadre géologique montre que le système est composé pour l'essentiel par des matériaux d'inondation à très faible perméabilité ceci laisse envisager qu'on ne peut pas supposer que K suit une distribution log-normal, sauf peut-être à l'intérieur de chaque faciès. Une modélisation par chaîne de Markov de la probabilité de passage, représentant la corrélation spatiale dans les faciès et entre eux, prend en compte les faits géologiques intéressants tout en fournissant une approche nouvelle pour une caractérisation statistique de la variabilité spatiale des faciès. La présence de séquences à faciès tronqués vers le haut, d'une corrélation croisée entre faciès, ainsi que d'autres caractères géologiques pris en compte par les chaînes de Markov conduisent à se poser des questions sur l'adéquation des approches géostatistiques conventionnelles utilisant les variogrammes ou les covariances pour modéliser l'hétérogénéité géologique. Resumen La información respecto a la textura de los sedimentos y la continuidad espacial es inherente a las descripciones de las facies deposicionales sedimentarias. De este modo, estas descripciones se convierten en excelentes predictores potenciales de las variaciones espaciales de la conductividad hidráulica (K). El análisis de la heterogeneidad en un aluvial en el Valle de Livermore (California, EEUU), a partir de las relativamente abundantes descripciones de testigos y de datos de ensayos de bombeo es una muestra del método de la facies deposicional para caracterizar la heterogeneidad subsuperficial. Las clasificaciones texturales convencionales de los testigos muestran una correlación pobre con K; sin embargo, el posterior refinamiento de la clasificación en canales, diques, flujo de derrubios y llanura de inundación revela un marco sistemático para la modelización espacial de K. Este marco geológico muestra que la mayor parte del sistema está compuesto por materiales de la llanura de inundación, de muy baja permeabilidad, y sugiere que no debe asumirse que K tiene una distribución log-normal, excepto quizás para cada facies por separado. Un modelo de cadena de Markov, tanto para representar la correlación espacial en cada facies como la relación entre las distintas facies, capta las características geológicas más importantes, a la vez que presenta un nuevo método para la caracterización estadística de la variabilidad espacial de las hidrofacies. La presencia de secuencias de facies más finas hacia la superficie, la correlación cruzada entre facies y otros atributos captados por las cadenas de Markov cuestionan lo adecuado de los métodos geoestadísticos convencionales basados en variogramas y covarianzas para modelar la heterogeneidad.

The combined effects of eustasy, tectonism, and clastic influx on the development of Pennsylvanian cyclic carbonates, southern Sangre de Cristo Mountains, New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gong Shouyeh; Humphrey, J.D.

1991-03-01

Pennsylvania cyclothems are well documented on stable continental shelves and the cyclicity has generally been attributed to glacio-eustasy. As a contrast, Atokan-Desmoinesian cyclic carbonates of the southern Sangre de Cristo Mountains developed in a tectonically active foreland basin, formed by thrusting along the Picuris-Pecos fault during early Pennsylvanian time. Strata exposed in two sections (Dalton Bluff, 260 m; Johnson Mesa, 340 m) are characterized by (1) shallowing-upward cycles, (2) cycles of variable thickness (5-20 m), (3) incomplete cycles, (4) cycles interrupted by terrigenous clastic input, and (5) noncyclic intervals. Allocyclic mechanisms alone cannot fully explain these observations; the authors hereinmore » propose that a complex interplay among eustasy, tectonism, and clastic sediment supply were responsible for the observed cycles. Lithofacies analysis indicates that location within the foreland basin played a significant role in cycle attributes. In the deeper portions of the basin (e.g., Dalton Bluff), an idealized cycle, from base to top consists of (1) shale/marl facies, (2) brachiopod wackestone facies, (3) phylloid algal facies, and (4) marine clastic facies. No evidence for subaerial exposure of cycle caps is noted. In contrast, in shallow portions of the basin near the forebulge (e.g., Johnson Mesa) the marine clastic facies is substituted by crinoidal grainstone/packstone facies that is capped by subaerial exposure surface. Each of the two cycles displays an overall grand (lower order) shallowing-upward cycle. This grand cycle developed as sediments infilled the initially starved foreland basin.« less

A model of tephra dispersal from an early Palaeogene shallow submarine Surtseyan-style eruption(s), the Red Bluff Tuff Formation, Chatham Island, New Zealand

NASA Astrophysics Data System (ADS)

Sorrentino, Leonor; Stilwell, Jeffrey D.; Mays, Chris

2014-03-01

The Red Bluff Tuff Formation, an early Palaeogene volcano-sedimentary shallow marine succession from the Chatham Islands (New Zealand), provides a unique framework, in eastern 'Zealandia', to explore tephra dispersal processes associated with ancient small phreatomagmatic explosions (i.e. Surtseyan-style eruptions). Detailed sedimentological mapping, logging and sampling integrated with the results of extensive laboratory analyses (i.e. grain-size, componentry and applied palaeontological methods) elucidated the complex mechanisms of transport and deposition of nine identified resedimented fossiliferous volcaniclastic facies. These facies record the subaqueous reworking and deposition of tephra from the erosion and degradation of a proximal, entirely submerged ancient Surtseyan volcanic edifice (Cone II). South of this volcanic cone, the lowermost distal facies provides significant evidence of deposition as water-supported volcanic- or storm-driven mass flows (e.g. turbidity currents and mud/debris flows) of volcaniclastic and bioclastic debris, whereas the uppermost distal facies exhibit features of tractional sedimentary processes caused by shallow subaqueous currents. Further north, within the proximity of the volcanic edifice, the uppermost facies are represented by an abundant, diverse, large, and well preserved in situ fauna of shallow marine sessile invertebrates (e.g. corals and sponges) that reflect the protracted biotic stabiliszation and rebound following pulsed volcanic events. Over a period of time, these stable and wave-eroded volcanic platforms were inhabited by a flourishing and diversifying marine community of benthic and sessile pioneers (corals, bryozoans, molluscs, brachiopods, barnacles, sponges, foraminifera, etc.). This succession exhibits a vertical progression of sedimentary structures (i.e. density, cohesive and mass flows, and cross-bedding) and our interpretations indicate a shallowing upwards succession. This study reports for the first time mechanisms of degradation of a Surtseyan volcano on Chatham Islands and contributes to a better understanding of complex ancient volcano-sedimentary subaqueous terrains. This model of deposition (i.e. onlapping/overlapping features onto the remains of volcanic edifice(s), a vertical transition of structures from deeper- to shallower-marine environments, disaster faunas and subsequent preferential colonisation of diverse biota, including large in situ sessile invertebrates, on the summit), characterises an extraordinary example to be applied to other ancient subaqueous volcanic environments.

Trace fossils revealed through x-radiography in facies analysis of Smackover Formation, southwest Alabama

DOE Office of Scientific and Technical Information (OSTI.GOV)

Esposito, R.A.; King, D.T. Jr.

The use of x-radiography has been applied to slabbed cores of Jurassic Smackover limestones from southwestern Alabama to enhance the complete petrologic description of the rocks. Through x-radiography, trace fossils have been revealed in what would otherwise appear to be homogeneous rock. In these biogenic structures, organic material, partly fecal in origin, is concentrated as infill packing in actively filled burrows. A microreducing environment within the burrow results in the mineralization by finely disseminated FeS/sub 2/. The density difference between FeS/sub 2/, which has a high absorption coefficient, and the surrounding calcium carbonate highlights the burrows in the x-radiographs. Thismore » characteristic burrow mineralization is shown well in the Smackover where a Zoophycus-Thalassinoides trace-fossil assemblage has been identified. Zoophycus, a feeding structure, is characterized by concave-upward traces with whorled peaks, and is best seen in slabs cut perpendicular to bedding. Thalassinoides is a dwelling structure characterized by a boxwork burrow system and is best seen in cores cut parallel to bedding. This assemblage is restricted to facies that is laterally persistent throughout the Smackover in most of Escambia County, Alabama. This trace-fossil assemblage is found in an oolitic pelletal packstone. This unit is overlain by an oolitic grainstone and is stratigraphically above a sparsely fossiliferous, laminated wackestone and packstone. Trace fossils in this horizon are abundant, but the traces are not found in stratigraphically adjacent lithofacies. Detecting these otherwise unseen trace fossils by x-radiography assisted the paleoenvironmental interpretation of this depositional facies as a low-energy subwave-base carbonate-shelf deposit.« less

Volumetric analysis of a New England barrier system using ground-penetrating-radar and coring techniques

USGS Publications Warehouse

Van Heteren, S.; FitzGerald, D.M.; Barber, D.C.; Kelley, J.T.; Belknap, D.F.

1996-01-01

Ground-penetrating-radar (GPR) profiles calibrated with core data allow accurate assessments of coastal barrier volumes. We applied this procedure successfully to the barrier system along Saco Bay, Maine (USA), as part of a sediment-budget study that focused on present-day sand volumes in various coastal, shoreface, and inner-shelf lith-osomes, and on sand fluxes that have affected the volume or distribution of sand in these sediment bodies through time. On GPR profiles, the components of the barrier lithosome are readily differentiated from other facies, except where the radar signal is attenuated by brackish or salty groundwater. Significant differences between dielectric properties of the barrier lithosome and other units commonly result in strong boundary reflectors. The mostly sandy barrier sediments allow deep penetration of GPR waves, in contrast to finer-grained strata and till-covered bedrock. Within the Saco Bay barrier system, 22 ??3 x 106 m3 of sediment are unevenly distributed. Two-thirds of the total barrier volume is contained within the northern and southern ends of the study area, in the Pine Point spit and the Ferry Beach/Goosefare complex, respectively. The central area around Old Orchard Beach is locally covered by only a thin veneer of barrier sand, averaging <3 m, that unconformably overlies shallow pre-Holocene facies. The prominence of barrier-spit facies and the distribution pattern of back-barrier sediments indicate that a high degree of segmentation, governed by antecedent topography, has affected the development of the Saco Bay barrier system. The present-day configuration of the barrier and back-barrier region along Saco Bay, however, conceals much of its early compartmentalized character.

Advanced GPR imaging of sedimentary features: integrated attribute analysis applied to sand dunes

NASA Astrophysics Data System (ADS)

Zhao, Wenke; Forte, Emanuele; Fontolan, Giorgio; Pipan, Michele

2018-04-01

We evaluate the applicability and the effectiveness of integrated GPR attribute analysis to image the internal sedimentary features of the Piscinas Dunes, SW Sardinia, Italy. The main objective is to explore the limits of GPR techniques to study sediment-bodies geometry and to provide a non-invasive high-resolution characterization of the different subsurface domains of dune architecture. On such purpose, we exploit the high-quality Piscinas data-set to extract and test different attributes of the GPR trace. Composite displays of multi-attributes related to amplitude, frequency, similarity and textural features are displayed with overlays and RGB mixed models. A multi-attribute comparative analysis is used to characterize different radar facies to better understand the characteristics of internal reflection patterns. The results demonstrate that the proposed integrated GPR attribute analysis can provide enhanced information about the spatial distribution of sediment bodies, allowing an enhanced and more constrained data interpretation.

Application of facies analysis to improve gas reserve growth in Fluvial Frio Reservoirs, La Gloria Field, South Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ambrose, W.A.; Jackson, M.L.W.; Finley, R.J.

1988-01-01

Geologically based infill-drilling strategies hold great potential for extension of domestic gas resources. Traditional gas-well drilling and development have often assumed homogeneous and continuous reservoirs; uniform gas-well spacing has resulted in numerous untapped reservoirs isolated from other productive sand bodies. Strategically located infill wells drilled into these undrained reservoirs may ultimately contact an additional 20% of original gas in place in Texas gas fields. Tertiary formations in the Texas Gulf Coast commonly exhibit multiple fluvial and fluvial-deltaic reservoirs that contain vertical and horizontal permeability barriers. For example, the Frio La Gloria field (Jim Wells and Brooks Counties, Texas) contains isolatedmore » and compartmentalized reservoirs that can be related to the irregular distribution of heterogeneous facies. Net-sand and log-facies maps in areas of dense well spacing delineate relatively continuous pay defined by lenticular point-bar and channel-fill deposits 1,500-2,500 ft wide. These point-bar deposits are flanked laterally by sand-poor levee and splay facies that isolate the reservoirs into narrow, dip-elongate bands.« less

An inverted metamorphic field gradient in the central Brooks Range, Alaska and implications for exhumation of high-pressure/low-temperature metamorphic rocks

USGS Publications Warehouse

Patrick, B.; Till, A.B.; Dinklage, W.S.

1994-01-01

During exhumation of the Brooks Range internal zone, amphibolite-facies rocks were emplaced atop the blueschist/greenschist facies schist belt. The resultant inverted metamorphic field gradient is mappable as a series of isograds encountered as one traverses up structural section. Amphibolite-facies metamorphism occurred at ??? 110 Ma as determined from 40Ar 39Ar analysis of hornblende. This contrasts with 40Ar 39Ar phengite cooling ages from the uderlying schist belt, which are clearly older (by 17-22 m.y.). Fabrics in both the amphibolite-facies rocks and schist belt are characterized by repeated cycles of N-vergent crenulation and transposition that was likely associated with out-of-sequence ductile thrusting in the internal zone of the Brooks Range orogen. Contractional deformation occurred in an overall environment of foreland-directed tectonic transport, broadly synchronous with exhumation of the internal zone, and shortening within the thin-skinned fold and thrust belt. These data are inconsistent with a recently postulated mid-Cretaceous episode of lithospheric extension in northern Alaska. ?? 1994.

Detailed facies analysis of the Upper Cretaceous Tununk Shale Member, Henry Mountains Region, Utah: Implications for mudstone depositional models in epicontinental seas

NASA Astrophysics Data System (ADS)

Li, Zhiyang; Schieber, Juergen

2018-02-01

Lower-Middle Turonian strata of the Tununk Shale Member of the greater Mancos Shale were deposited along the western margin of the Cretaceous Western Interior Seaway during the Greenhorn second-order sea level cycle. In order to examine depositional controls on facies development in this mudstone-rich succession, this study delineates temporal and spatial relationships in a process-sedimentologic-based approach. The 3-dimensional expression of mudstone facies associations and their stratal architecture is assessed through a fully integrative physical and biologic characterization as exposed in outcrops in south-central Utah. Sedimentologic characteristics from the millimeter- to kilometer-scale are documented in order to fully address the complex nature of sediment transport mechanisms observed in this shelf muddy environment. The resulting facies model developed from this characterization consists of a stack of four lithofacies packages including: 1) carbonate-bearing, silty and sandy mudstone (CSSM), 2) silt-bearing, calcareous mudstone (SCM), 3) carbonate-bearing, silty mudstone to muddy siltstone (CMS), and 4) non-calcareous, silty and sandy mudstone (SSM). Spatial and temporal variations in lithofacies type and sedimentary facies characteristics indicate that the depositional environments of the Tununk Shale shifted in response to the 2nd-order Greenhorn transgressive-regressive sea-level cycle. During this eustatic event, the Tununk shows a characteristic vertical shift from distal middle shelf to outer shelf (CSSM to SCM facies), then from outer shelf to inner shelf environment (SCM to CMS, and to SSM facies). Shifting depositional environments, as well as changes in dominant paleocurrent direction throughout this succession, indicate multiple source areas and transport mechanisms (i.e. longshore currents, offshore-directed underflows, storm reworking). This study provides a rare documentation of the Greenhorn cycle as exposed across the entire shelf setting. High-resolution mapping of genetically-related packages facilitate the development of process-based depositional models that can be utilized for lateral correlations into the equivalent foredeep strata of the Cretaceous Interior.

Facies analysis of Lofer cycles (Upper Triassic), in the Argolis Peninsula (Greece)

NASA Astrophysics Data System (ADS)

Pomoni-Papaioannou, F.

The Upper Triassic carbonate sediments of Argolis Peninsula are part of the Upper Triassic-Lower Jurassic extensive and thick neritic carbonate formations (Pantokrator facies) that formed at the passive Pelagonian margin and are considered as Dachstein-type platform carbonates. Facies analysis of the Upper Triassic "Lofer-type" lagoonal-peritidal cycles in the Dhidimi area, proved that cycles, although mostly incomplete, were regressive shallowing-upward. The ideal elementary cyclothems are meter-scale in thickness and begin with a subtidal bed (Member C), represented by a peloidal dolostone with megalodonts (wackestone or packstone), being followed by a stromatolitic intertidal dolomitic mudstone and/or fenestral intertidal dolomitic mudstone (Member B) that is overlain by dolocrete (terrestrial stromatolites or pisoidic dolomite) or a supratidal "soil conglomerate" in red micritic matrix (Member A). Lofer-cycle boundaries are defined at the erosional surfaces and accordingly the Lofer cyclothems are unconformity-bounded units. Due to common post-depositional truncation of the subtidal and intertidal facies, the supratidal members prevail, being developed, in places, directly upon subaerial exposure surfaces (erosionally reduced cyclothems). Peritidal layers are characterized by a well-expressed lamination, sheet cracks, tepee structures, fenestral pores and karst dissolution cavities. The studied lagoonal-peritidal cycles are considered to have been deposited in a tidal-flat setting (inner platform), repeatedly exposed under subaerial conditions, in the context of a broader tropical rimmed platform. Although the studied area was tectonically active due to rift-activity and the autocyclic processes should also be taken in consideration, the great lateral correlatability of cycles, the facies shifting and the widespread erosion that resulted in superposition of supratidal-pedogenic facies directly upon subtidal members (subaerial erosional unconformity), indicating a sea-level drop, reflect allocyclic control via high-frequency eustatic sea-level oscillation (orbital forcing). Sediment deposition occurred during low-stand system tract (LST), that probably continued also in the transgressive system tract (TST) and reflects an overall sea-level fall. Under these conditions dissolution and cement precipitation episodes, as well development of paleosols and karsts, were triggered, during a relatively less arid interval.

Reservoir development in bryozoan bafflestone facies of the Ullin (Warsaw) Limestone (Middle Mississippian) in the Illinois basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lasemi, Z.; Treworgy, J.D.; Norby, R.D.

1994-08-01

Recent drilling in Enfield South and Johnsonville fields in southern Illinois has encountered prolific petroleum-producing zones within the Ullin (Warsaw) Limestone. This and large cumulative production from a number of older wells in the Illinois basin indicate that the Ullin has greater reservoir potential than previously recognized. The Ullin reservoir facies is mainly a fenestrate bryozoan-dominated bafflestone developed on the flanks of Waulsortian-type mud mounds or on transported skeletal sand buildups. Subsurface geology and petrography reveal such porous bryozoan bafflestone facies (some with shows of oil) at various horizons within the Ullin. However, in part because of water problems inmore » some areas, only the upper part of the Ullin has been tested thus far and, as a result, significant reservoirs in the deeper part of the unit may have been missed. Preliminary data indicate several facies in the Ullin that vary in their aerial distribution in the basin. These facies include (1) skeletal sand-wave facies and/or bryozoan bafflestone in the upper Ullin, (2) bryozoan bafflestone with a dense Waulsortian mud mound core, (3) thick bryozoan bafflestone over a skeletal grainstone facies, and (4) thick mud mound-dominated facies with thin porous flanking bafflestone/grainstone facies. Areas with facies type 1 and 2 have the highest potential for commercial reservoir development. Facies type 3, although quite porous, is commonly wet, and the porous facies type 4 may be localized and not extensive enough to be commercial. Petrographic examination shows excellent preservation of primary intra- and interparticle porosities within the bryozoan bafflestone facies. The generally stable original mineralogy prevented extensive dissolution-reprecipitation and occlusion of porosity. Further, the stable mineralogy and minor early marine cementation prevented later compaction and burial diagenesis.« less

When four principles are too many: a commentary.

PubMed

Gillon, Raanan

2012-04-01

This commentary briefly argues that the four prima facie principles of beneficence, non-maleficence, respect for autonomy and justice enable a clinician (and anybody else) to make ethical sense of the author's proposed reliance on professional guidance and rules, on law, on professional integrity and on best interests, and to subject them all to ethical analysis and criticism based on widely acceptable basic prima facie moral obligations; and also to confront new situations in the light of those acceptable principles.

A new subdivision of the central Sesia Zone (Aosta Valley, Italy)

NASA Astrophysics Data System (ADS)

Giuntoli, Francesco; Engi, Martin; Manzotti, Paola; Ballèvre, Michel

2015-04-01

The Sesia Zone in the Western Alps is a continental terrane probably derived from the NW-Adriatic margin and polydeformed at HP conditions during Alpine convergence. Subdivisions of the Sesia Zone classically have been based on the dominant lithotypes: Eclogitic Micaschist Complex, Seconda Zona Diorito-Kinzigitica, and Gneiss Minuti Complex. However, recent work (Regis et al., 2014) on what was considered a single internal unit has revealed that it comprises two or more tectonic slices that experienced substantially different PTDt-evolutions. Therefore, detailed regional petrographic and structural mapping (1:3k to 1:10k) was undertaken and combined with extensive sampling for petrochronological analysis. Results allow us to propose a first tectonic scheme for the Sesia Zone between the Aosta Valley and Val d'Ayas. A set of field criteria was developed and applied, aiming to recognize and delimit the first order tectonic units in this complex structural and metamorphic context. The approach rests on three criteria used in the field: (1) Discontinuously visible metasedimentary trails (mostly carbonates) considered to be monocyclic (Permo-Mesozoic protoliths); (2) mappable high-strain zones; and (3) visible differences in the metamorphic imprint. None of these key features used are sufficient by themselves, but in combination they allow us to propose a new map that delimits main units. We propose an Internal Complex with three eclogitic sheets, each 0.5-3 km thick. Dominant lithotypes include micaschists associated with mafic rocks and minor orthogneiss. The main foliation is of HP, dipping moderately NW. Each of these sheets is bounded by (most likely monometamorphic) sediments, <10-50 m thick. HP-relics (of eclogite facies) are widespread, but a greenschist facies overprint locally is strong close to the tectonic contact to neighbouring sheets. An Intermediate Complex lies NW of the Internal Complex and comprises two thinner, wedge-shaped units termed slices. These are composed of siliceous dolomite marbles, meta-granites and -diorites with few mafic boudins. The main foliation dips SE and is of greenschist facies, but omphacite, glaucophane, and garnet occur as relics. Towards the SW, the width of the Intermediate Complex is reduced from 0.5 km to a few meters. In the External Complex several discontinuous lenses occur; these comprise 2DK-lithotypes and are aligned with greenschist facies shear zones mapped within Gneiss Minuti. By combining these features, three main sheets were delimited in the External Complex, with the main foliation being of greenschist facies and dipping moderately SE. Petrological work and in situ U-Th-Pb dating of accessory phases is underway in several of these subunits of the Sesia Zone to constrain their PTDt-history and thus their Alpine assembly. REFERENCE Regis, D., Rubatto, D., Darling, J., Cenki-Tok, B., Zucali, M., Engi, M., 2014. Multiple metamorphic stages within an eclogite-facies terrane (Sesia Zone, Western Alps) revealed by Th-U-Pb petrochronology. J.Petrol. 55, 1429-1456.

Best Practices for Environmental Site Management: A Practical Guide for Applying Environmental Sequence Stratigraphy to Improve Conceptual Site Models

EPA Science Inventory

Presented here is a practical guide on the application of the geologic principles of sequence stratigraphy and facies models to the characterization of stratigraphic heterogeneity at hazardous waste sites. This technology is applicable to sites underlain by clastic aquifers (int...

8 CFR 245a.12 - Filing and applications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 4, 2003. To benefit from the provisions of LIFE Legalization, an alien must properly file an... or motion to reconsider. An alien who is prima facie eligible for adjustment of status under LIFE... unrelated to this Subpart B, the alien may apply before the Service for LIFE Legalization adjustment of...

8 CFR 245a.12 - Filing and applications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 4, 2003. To benefit from the provisions of LIFE Legalization, an alien must properly file an... or motion to reconsider. An alien who is prima facie eligible for adjustment of status under LIFE... unrelated to this Subpart B, the alien may apply before the Service for LIFE Legalization adjustment of...

8 CFR 245a.12 - Filing and applications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 4, 2003. To benefit from the provisions of LIFE Legalization, an alien must properly file an... or motion to reconsider. An alien who is prima facie eligible for adjustment of status under LIFE... unrelated to this Subpart B, the alien may apply before the Service for LIFE Legalization adjustment of...

Stratigraphy, structure, and lithofacies relationships of Devonian through Permian sedimentary rocks: Paradox Basin and adjacent areas - southeastern Utah. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCleary, J.; Rogers, T.; Ely, R.

Geophysical well log analysis, literature review, and field work were conducted to develop isopach, structure contour, outcrop, and facies maps and cross sections for the Devonian through Permian strata of a 14,586-km/sup 2/ (5632-square-mile) area in southeastern Utah. The study area includes part of the Paradox Basin, the salt deposits of which are of interest in siting studies for a nuclear waste repository. For this reason hydrologic models of this area are needed. This study, part of which included the development of a three-dimensional stratigraphic computer model utilizing Geographic Information System software, can serve as a base for hydrologic ormore » other models for this area. Within and adjacent to the study area, 730 wells were screened to select the 191 wells analyzed for the study. It was found that the Elbert through Molas formations did not exhibit noticeable facies changes within the study area. The Pinkerton Trail Formation exhibits moderate changes: anhydrite and shale become somewhat more abundant toward the northeast. Facies changes in the Paradox Formation are more dramatic. Thick saline facies deposits are present in the northeast, grading to thinner anhydrite and then to carbonate facies in the south and west. The lithology of the Honaker Trail Formation appears to be fairly uniform throughout the area. Facies changes in the Cutler Group are numerous and sometimes dramatic, and generally correspond to the named formations of the group. Other factors that could affect groundwater flow, such as stratigraphic cover of fine-grained rocks, area of formation outcrops, and fracturing and faulting are discussed and delineated on maps.« less

Coral distribution patterns in Miocene Reefs of Anguilla, Leeward Islands, West Indies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foster, A.B.; Johnson, K.G.

1988-01-01

Anguilla, a 27 by 5 km island at 18/sup 0/13'N, 63/sup 0/05'W, parallels the northwest edge of the Anguilla bank (St. Martin plateau) in the outer lesser Angilles volcanic arc, which was active from the Eocene to Oligocene. Except for scattered exposures of tuff or basalt, the island is composed predominantly of reefal limestones and marls of the 70-m thick, middle Miocene Anguilla Formation, deposited on a shallow inner shelf platform extending from volcanoes near St. Martin. The reef framework consists of branched and platy corals interspersed with calcareous sand lenses. Although the limestones have been uplifted and subjected tomore » minor faulting, little evidence supports extensive transport across a slope. Coral distribution patterns have been quantified across the reefal units by point-counting species occurrences at 0.16-m intervals within 1-m/sup 2/ quadrants placed haphazardly across vertical exposures. Eight coral species (of possibly 18 total) were recorded. Cluster analysis delineated four facies: (1) a low-diversity facies dominated by branched Porites, (2) an intermediate diversity facies dominated by branched Porites, (3) a high-diversity facies dominated by massive Montastraea, Siderastrea, and Porites, and (4) an intermediate diversity facies dominated by platy Porites. These facies consists of lenses, no more than 100 m long and 2 m high, arranged in no apparent regular sequence. Thus, they do not represent zones across a depth gradient. Comparisons with living Caribbean reefs suggests that the Anguilla Miocene reefs were similar to small, modern, backreef fringing and patch reefs near the San Blas Islands of Panama, reefs whose variable composition and patchy distribution depend largely on sedimentation and current patterns.« less

Paleolimnology of Lake Tubutulik, an iron-meromictic Eocene Lake, eastern Seward Peninsula, Alaska

USGS Publications Warehouse

Dickinson, K.A.

1988-01-01

Sideritic lacustrine mudstone was found in drill core from a uranium deposit in the Death Valley area in the eastern part of the Seward Peninsula, Alaska. The precursor sediments for this rock were deposited in an unusual "iron-meromictic" Eocene lake, herein named Lake Tubutulik, which occupied part of the Boulder Creek basin, a structural graben that is probably a southern extension of the larger Death Valley basin. The Boulder Creek basin is bounded on the west by granite of the Late Cretaceous Darby Pluton, on the east by Precambrian to Paleozoic metasedimentary rocks. The lake basin was formed by basaltic flows that dammed the river valley of the ancestral Tubutulik River in early Eocene time. Lake Tubutulik contained a nearshore facies of fine-grained organic mud and an offshore facies of laminated sideritic mud. The offshore (profundal) laminated mudstone consists of alternating layers of authigenic siderite and detrital layers containing mostly quartz and clay minerals. Both lacustrine facies contain turbidities. The lacustrine sediments graded laterally into an onshore facies of colluvial and fluvial sandstone, paludal mudstone, and coal. The ancient lake apparently occupied a small deep basin in a tectonically active area of high relief. Meromixus was probably stabilized by reduced iron and bicarbonate dissolved in the monimolimnion. The intensity of meromixus decreased as the lake became shallower from sediment filling. The source of the iron, abundant in the monimolimnion of Lake Tubutulik, was probably the Eocene basalt. Based on carbon isotope analysis of the siderite, the dissolved bicarbonate in the profundal facies was largely inorganic. Sideritic carbon in one sample from the onshore paludal facies has an isotopic signature (??13C = +16.9) consistent with residual carbon formed during methanogenic fermentation. ?? 1988.

Algorithms of Crescent Structure Detection in Human Biological Fluid Facies

NASA Astrophysics Data System (ADS)

Krasheninnikov, V. R.; Malenova, O. E.; Yashina, A. S.

2017-05-01

One of the effective methods of early medical diagnosis is based on the image analysis of human biological fluids. In the process of fluid crystallization there appear characteristic patterns (markers) in the resulting layer (facies). Each marker is a highly probable sign of some pathology even at an early stage of a disease development. When mass health examination is carried out, it is necessary to analyze a large number of images. That is why, the problem of algorithm and software development for automated processing of images is rather urgent nowadays. This paper presents algorithms to detect a crescent structures in images of blood serum and cervical mucus facies. Such a marker indicates the symptoms of ischemic disease. The algorithm presented detects this marker with high probability when the probability of false alarm is low.

The Lower Triassic Sorkh Shale Formation of the Tabas Block, east central Iran: Succesion of a failed-rift basin at the Paleotethys margin

USGS Publications Warehouse

Lasemi, Y.; Ghomashi, M.; Amin-Rasouli, H.; Kheradmand, A.

2008-01-01

The Lower Triassic Sorkh Shale Formation is a dominantly red colored marginal marine succession deposited in the north-south trending Tabas Basin of east central Iran. It is correlated with the unconformity-bounded lower limestone member of the Elika Formation of the Alborz Mountains of northern Iran. The Sorkh Shale is bounded by the pre-Triassic and post-Lower Triassic interregional unconformities and consists mainly of carbonates, sandstones, and evaporites with shale being a minor constituent. Detailed facies analysis of the Sorkh Shale Formation resulted in recognition of several genetically linked peritidal facies that are grouped into restricted subtidal, carbonate tidal flat, siliciclastic tidal flat, coastal plain and continental evaporite facies associations. These were deposited in a low energy, storm-dominated inner-ramp setting with a very gentle slope that fringed the Tabas Block of east central Iran and passed northward (present-day coordinates) into deeper water facies of the Paleotethys passive margin of northern Cimmerian Continent. Numerous carbonate storm beds containing well-rounded intraclasts, ooids and bioclasts of mixed fauna are present in the Sorkh Shale Formation of the northern Tabas Basin. The constituents of the storm beds are absent in the fair weather peritidal facies of the Sorkh Shale Formation, but are present throughout the lower limestone member of the Elika Formation. The Tabas Block, a part of the Cimmerian continent in east central Iran, is a rift basin that developed during Early Ordovician-Silurian Paleotethys rifting. Facies and sequence stratigraphic analyses of the Sorkh Shale Formation has revealed additional evidence supporting the Tabas Block as a failed rift basin related to the Paleotethys passive margin. Absence of constituents of the storm beds in the fair weather peritidal facies of the Sorkh Shale Formation, presence of the constituents of the storm beds in the fair weather facies of the Elika Formation (the Sorkh Shale equivalent in the Alborz Paleotethys margin) and southward paleocurrent directions of carbonate storm beds suggest that the low topographic gradient of the ramp in the Tabas failed rift basin was facing the Paleotethys Ocean, where the storms were generated. In addition, northward paleocurrent directions of the fair weather facies and northward increase in carbonate content of the Sorkh Shale sequence further indicate that the Tabas Basin was tectonically a part of the Paleotethys passive margin. It is apparent that relative sea level, basin geometry and tectonic movements along the bounding faults played significant roles during deposition of the Sorkh Shale Formation by controlling accommodation space and facies variations along the Tabas failed rift basin.

Subsurface Analysis of the Mesaverde Group on and near the Jicarilla Apache Indian Reservation, New Mexico-its implication on Sites of Oil and Gas Accumulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ridgley, Jennie

2001-08-21

The purpose of the phase 2 Mesaverde study part of the Department of Energy funded project ''Analysis of oil-bearing Cretaceous Sandstone Hydrocarbon Reservoirs, exclusive of the Dakota Sandstone, on the Jicarilla Apache Indian Reservation, New Mexico'' was to define the facies of the oil-producing units within the subsurface units of the Mesaverde Group and integrate these results with outcrop studies that defined the depositional environments of these facies within a sequence stratigraphic context. The focus of this report will center on (1) integration of subsurface correlations with outcrop correlations of components of the Mesaverde, (2) application of the sequence stratigraphicmore » model determined in the phase one study to these correlations, (3) determination of the facies distribution of the Mesaverde Group and their relationship to sites of oil and gas accumulation, (4) evaluation of the thermal maturity and potential source rocks for oil and gas in the Mesaverde Group, and (5) evaluation of the structural features on the Reservation as they may control sites of oil accumulation.« less

Recent Developments in Facies Models for Siliciclastic Sediments.

ERIC Educational Resources Information Center

Miall, Andrew D.

1982-01-01

Discusses theory of facies models (attempts to synthesize/generalize information about depositional environments), strengths/weaknesses of facies modelling, recent advances in facies models for siliciclastic sediments (focusing on fluvial, lacustrine, eolian and glacial environments, clastic shorelines and continental shelves, and clastic…

Shoreline deposits and diagenesis resulting from two Late Pleistocene highstands near +5 and +6 metres, Durban, South Africa

USGS Publications Warehouse

Cooper, J.A.G.; Flores, R.M.

1991-01-01

In exposures of Pleistocene rocks on the east coast of South Africa, eight sedimentary facies were distinguished on the basis of petrology, grain size, internal structures and field relationships. These are interpreted as deposits of surf zone, breaker zone, swash zone, backbeach, boulder beach and dune environments. Three phases of deposition and diagenesis are recognized. As a result of the stabilising effect of pre-existing coastal facies, the deposits from successive sea level stands are stacked vertically in a narrow coast-normal strip. Early cementation prevented erosion of the deposits during subsequent transgressions. Deposition of subsequent facies took place on an existing coastal dune (Facies 1). A terrace was cut into this dune at a sea level 4.5 to 5 m above present. At this sea level, clastic shoreline sediments were deposited which make up the main sedimentary sequence exposed (Facies 2-7). The steep swash zone, coarse grain size, and comparison with modern conditions in the study area indicate clastic deposition on a high-energy, wave-dominated, microtidal coastline. Vertical stacking of progressively shallower water facies indicates progradation associated with slightly regressive conditions, prior to stranding of the succession above sea level. During a subsequent transgression to 5.5 or 6 m above present sea level, a second terrace was cut across the existing facies, which by then were partly lithified. A boulder beach (Facies 8) deposited on this terrace is indicative of high wave energy and a rocky coastline, formed by existing cemented coastal facies. Comparison with dated deposits from other parts of the South African coast suggest a Late Pleistocene age for Facies 2-8. Deposition was terminated by subsequent regression and continuing low sea levels during the remainder of the Pleistocene. Cementation of the facies took place almost entirely by carbonate precipitation. The presence of isopachous fibrous cements suggests early cementation of Facies 1, 2, 3 and 4 under marine conditions, initially as aragonite which has since inverted to calcite. Facies 5, 6 and 7 are cemented only by equant calcite spar, evidence of cementation in the meteoric phreatic and vadose zones. Lowering of the water table during regression caused the remaining pore space in Facies 1, 2, 3 and 4 to be filled with equant calcite spar. Decementation in a 130 cm wide zone is attributed to water table shifts associated with the later transgression which deposited Facies 8. The vertical stacking of the two depositional sequences may be attributed to rapid cementation of Facies 2, 3, 4, 5, 6 and 7 under humid, subtropical conditions. This lithified sequence then acted as a focus for deposition of coarse-grained shoreline facies (Facies 8) during the subsequent transgression. ?? 1991.

Deposits related to supercritical flows in glacifluvial deltas and subaqueous ice-contact fans: Integrating facies analysis and ground-penetrating radar

NASA Astrophysics Data System (ADS)

Lang, Joerg; Sievers, Julian; Loewer, Markus; Igel, Jan; Winsemann, Jutta

2017-04-01

Bedforms related to supercritical flows have recently received much interest and the understanding of flow morphodynamics and depositional processes has been greatly advanced. However, outcrop studies of these bedforms are commonly hampered by their long wavelengths. Therefore, we combined outcrop-based facies analysis with extensive ground-penetrating radar (GPR) measurements. Different GPR antennas (200, 400 and 1500 MHz) were utilised to measure both long profiles and densely spaced grids in order to map the large-scale facies architecture and image the three-dimensional geometry of the deposits. The studied delta and subaqueous ice-contact fan successions were deposited within ice-dammed lakes, which formed along the margins of the Middle Pleistocene Scandinavian ice sheets across Northern Germany. These glacilacustrine depositional systems are characterised by high aggradation rates due to the rapid expansion and deceleration of high-energy sediment-laden flows, favouring the preservation of bedforms related to supercritical flows. In flow direction, delta foresets commonly display lenticular scours, which are 2 to 6 m wide and 0.15 to 0.5 m deep. Characteristically, scours are filled by upslope dipping backsets, consisting of pebbly sand. In a few cases, massive and deformed strata were observed, passing upflow into backsets. Across flow, scours are 2 to 3 m wide and typically display a concentric infill. The scour fills are commonly associated with subhorizontally or sinusoidal stratified pebbly sand. These facies types are interpreted as deposits of cyclic steps and antidunes, respectively, representing deposition from supercritical density flows, which formed during high meltwater discharge events or regressive slope failures (Winsemann et al., in review). The GPR-sections show that the scour fills form trains along the delta foresets, which can be traced for up to 15 m. The studied subaqueous ice-contact fan succession relates to the zone of flow transition of a supercritical plane-wall efflux-jet and is characterised by deposits of chutes-and-pools, antidunes and humpback dunes (Lang & Winsemann, 2013). In the GPR-sections, long wavelength (2 to 40 m) sinusoidal reflectors with lateral extents of up to 175 m represent the dominant radar facies, which is interpreted as deposits of stationary aggrading antidunes. This radar facies is associated with lenses (2 to 15 m wide, 0.5 to 1.5 m thick) filled with planar upflow-dipping reflectors, and sheet-like sigmoidal downflow-dipping reflectors, which are interpreted as deposits of chutes-and-pools and humpback dunes, respectively. Facies transitions occur from cyclic steps or chutes-and-pools to antidunes and from antidunes to humpback dunes, and are interpreted as related to the evolution of bedforms under spatially and temporarily changing flow conditions. References: Lang, J. & Winsemann, J. (2013) Lateral and vertical facies relationships of bedforms deposited by aggrading supercritical flows: from cyclic steps to humpback dunes. Sedimentary Geology 296, 36-54. Winsemann, J., Lang, J., Loewer, M., Polom, U., Pollok, L., Igel, J. & Brandes, C. (in review) Forced regressive ice-marginal deltas in glacial lake basins: geomorphology, facies variability and large-scale depositional architecture.

Tectono-sedimentary analysis using the anisotropy of magnetic susceptibility: a study of the terrestrial and freshwater Neogene of the Orava Basin

NASA Astrophysics Data System (ADS)

Łoziński, Maciej; Ziółkowski, Piotr; Wysocka, Anna

2017-10-01

The Orava Basin is an intramontane depression filled with presumably fine-grained sediments deposited in river, floodplain, swamp and lake settings. The basin infilling constitutes a crucial record of the neoalpine evolution of the Inner/Outer Carpathian boundary area since the Neogene, when the Jurassic-Paleogene basement became consolidated, uplifted and eroded. The combination of sedimentological and structural studies with anisotropy of magnetic susceptibility (AMS) measurements provided an effective tool for recognition of terrestrial environments and deformations of the basin infilling. The lithofacies-oriented sampling and statistical approach to the large dataset of AMS specimens were utilized to define 12 AMS facies based on anisotropy degree (P) and shape (T). The AMS facies allowed a distinction of sedimentary facies ambiguous for classical methods, especially floodplain and lacustrine sediments, as well as revealing their various vulnerabilities to tectonic modification of AMS. A spatial analysis of facies showed that tuffites along with lacustrine and swamp deposits were generally restricted to marginal and southern parts of the basin. Significant deformations were noticed at basin margins and within two intrabasinal tectonic zones, which indicated the tectonic activity of the Pieniny Klippen Belt after the Middle Miocene. The large southern area of the basin recorded consistent N-NE trending compression during basin inversion. This regional tectonic rearrangement resulted in a partial removal of the southernmost basin deposits and shaped the basin's present-day extent.

Facies analysis of Late Proterozoic through Lower Cambrian rocks of the Death Valley regional ground-water system and surrounding areas, Nevada and California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweetkind, D.S.; White, D.K.

Late Proterozoic through Lower Cambrian rocks in the southern Great Basin form a westward-thickening wedge of predominantly clastic deposits that record deposition on the early western shelf edge of western North America (Stewart and Poole, 1974; Poole and others, 1992). Regional analyses of geologic controls on ground-water flow in the southern Great Basin typically combined lithostratigraphic units into more general hydrogeologic units that have considerable lateral extent and distinct hydrologic properties. The Late Proterozoic through Lower Cambrian rocks have been treated as a single hydrogeologic unit, named the lower clastic aquitard (Winograd and Thordarson, 1975) or the quartzite confining unitmore » (Laczniak and others, 1996), that serves as the hydrologic basement to the flow system. Although accurate in a general sense, this classification ignores well-established facies relations within these rocks that might increase bedrock permeability and locally influence ground-water flow . This report presents a facies analysis of Late Proterozoic through Lower Cambrian rocks (hereafter called the study interval) in the Death Valley regional ground-water flow system - that portion of the southern Great Basin that includes Death Valley, the Nevada Test Site, and the potential high-level nuclear waste underground repository at Yucca Mountain (fig. 1). The region discussed in this report, hereafter called the study area, covers approximately 100,000 km2 (lat 35 degrees-38 degrees 15'N., long 115 degrees-118 degrees W.). The purpose of this analysis is to provide a general documentation of facies transitions within the Late Proterozoic through Lower Cambrian rocks in order to provide an estimate of material properties (via rock type, grain size, and bedding characteristics) for specific hydrogeologic units to be included in a regional ground-water flow model.« less

Reservoir compartmentalization of deep-water Intra Qua Iboe sand (Pliocene), Edop field, offshore Nigeria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hermance, W.E.; Olaifa, J.O.; Shanmugam, G.

An integration of 3-D seismic and sedimentological information provides a basis for recognizing and mapping individual flow units within the Intra Qua Iboe (IQI) reservoir (Pliocene), Edop Field, offshore Nigeria. Core examination show the following depositional facies: A-Sandy slump/mass flow, B-Muddy slump/mass flow, C. Bottom current reworking. D-Non-channelized turbidity currents, E. Channelized (coalesced) turbidity currents. F-Channelized (isolated) turbidity currents, G-Pelagic/hemipelagic, H-Levee, I-Reworked slope, J-Wave dominated, and K-Tide dominated facies. With the exception of facies J and K, all these facies are of deep-water affinity. The IQI was deposited on an upper slope environment in close proximity to the shelf edge.more » Through time, as the shelf edge migrated scaward, deposition began with a channel dominated deep-water system (IQI 1 and 2) and progressed through a slump/debris flow dominated deep-water system (IQI 3, the principle reservoir) to a tide and wave dominated shallow-water system (IQI 4). Compositional and textural similarities between the deep-water facies result in similar log motifs. Furthermore, these depositional facies are not readily apparent as distinct seismic facies. Deep-water facies A, D, E, and F are reservoir facies, whereas facies B, C, G, H, and I are non-reservoir facies. However, Facies G is useful as a seismically mappable event throughout the study area. Mapping of these non-reservoir events provides the framework for understanding gross reservoir architecture. This study has resulted in seven defined reservoir units within the IQI, which serves as the architectural framework for ongoing reservoir characterization.« less

Stratigraphic framework of sediment-starved sand ridges on a mixed siliciclastic/carbonate inner shelf; west-central Florida

USGS Publications Warehouse

Edwards, J.H.; Harrison, S.E.; Locker, S.D.; Hine, A.C.; Twichell, D.C.

2003-01-01

Seismic reflection profiles and vibracores have revealed that an inner shelf, sand-ridge field has developed over the past few thousand years situated on an elevated, broad bedrock terrace. This terrace extends seaward of a major headland associated with the modern barrier-island coastline of west-central Florida. The overall geologic setting is a low-energy, sediment-starved, mixed siliciclastic/carbonate inner continental shelf supporting a thin sedimentary veneer. This veneer is arranged in a series of subparallel, shore-oblique, and to a minor extent, shore-parallel sand ridges. Seven major facies are present beneath the ridges, including a basal Neogene limestone gravel facies and a blue-green clay facies indicative of dominantly authigenic sedimentation. A major sequence boundary separates these older units from Holocene age, organic-rich mud facies (marsh), which grades upward into a muddy sand facies (lagoon or shallow open shelf/seagrass meadows). Cores reveal that the muddy shelf facies is either in sharp contact or grades upward into a shelly sand facies (ravinement or sudden termination of seagrass meadows). The shelly sand facies grades upward to a mixed siliciclastic/carbonate facies, which forms the sand ridges themselves. This mixed siliciclastic/carbonate facies differs from the sediment on the beach and shoreface, suggesting insignificant sediment exchange between the offshore ridges and the modern coastline. Additionally, the lack of early Holocene, pre-ridge facies in the troughs between the ridges suggests that the ridges themselves do not migrate laterally extensively. Radiocarbon dating has indicated that these sand ridges can form relatively quickly (???1.3 ka) on relatively low-energy inner shelves once open-marine conditions are available, and that frequent, high-energy, storm-dominated conditions are not necessarily required. We suggest that the two inner shelf depositional models presented (open-shelf vs. migrating barrier-island) may have co-existed spatially and/or temporally to explain the distribution of facies and vertical facies contacts. ?? 2003 Elsevier B.V. All rights reserved.

Cone penetration test for facies study: a review

NASA Astrophysics Data System (ADS)

Satriyo, N. A.; Soebowo, E.

2018-02-01

Engineering geology investigation through Cone Penetration Test (with pore-pressure measurements) approach is one of the most effective methods to find out sub surface layer. This method is generally used in Late Quaternary and typical deposit and can also be used for sedimentological purposes. CPTu and drilling core for high-resolution stratigraphy sub surface have been done in many research. These combined data can also be used to detail correlations of sub surface stratigraphy, to identify facies change and to determine the interpretation of sequence stratigraphy. The determination facies distribution research based on CPTu profile, which was included in quantitative data, is rarely done especially in Indonesia which has a different climate. Whereas drilling core description using grain size analysis will provide information on validation about physical lithology characteristics which are developed in research area. The interpretation is given using CPTu curve pattern and cone resistance parameter of CPTu’s data correlated with physical characteristics of drilling core. The cone resistance will provide the strength of the sediment layer which also gives the range of data between clay and sand. Finally, the review will show that each of developing facies characteristic provides a specific curve pattern and every sediment deposit facies can be determined by the transformation of CPTu curve profile. Despite the fact that the research using those methods are quite comprehensive, a review is presented on each of these methods related with the chronologic factor seen by the geological time and different characteristics sediment of different location.

Depositional analysis of Hill sand of Rodessa Formation (lower Cretaceous) in north Shongaloo-Red Rock field, Webster Parish, Louisiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adamick, J.A.; Sartin, A.A.

1988-09-01

Hill sand is an informal subdivision of the Lower Cretaceous Rodessa Formation and is a common hydrocarbon reservoir in northeastern Texas, northern Louisiana, and southern Arkansas. The Hill sand is lithologically variable within the study area and consists of conglomerate, fine-grained sandstone, siltstone, mottled red-green claystone, black shale, and limestone. Five depositional environments were interpreted for lithofacies present in Hill sand cores from the North Shongaloo-Red Rock field. These include facies A, fluvial point bar; facies B, crevasse system; facies C, interdistributary bay; facies D, swamp; and facies E, carbonate interdistributary bay. Fluvial point bar and crevasse deposits commonly formmore » hydrocarbon reservoirs in the field. On a regional scale, depositional environments observed in the Hill sand include several fluvial deposystems trending northeast-southwest through Webster Parish. These deposystems terminate into deltaic distributary mouth bars along a northwest-southeast-trending coastline. Areas west of the coastline were occupied by shallow marine environments. Interchannel areas east of the coastline were occupied by interdistributary bay, lake, and crevasse environments in lower deltaic areas, and by lake, swamp, and crevasse environments in upper deltaic areas. Lowermost deposits of the Hill sand throughout the region are interpreted to consist of shallow marine environments. These marine deposits were overlain by thick, predominantly nonmarine sediments. Near the end of Hill sand deposition, the entire region was covered by very shallow marine environments, prior to deposition of the overlying First Lower Anhydrite Stringer.« less

Trace fossil analysis of lacustrine facies and basins

USGS Publications Warehouse

Buatois, L.A.; Mangano, M.G.

1998-01-01

Two ichnofacies are typical of lacustrine depositional systems. The Scoyenia ichnofacies characterizes transitional terrestrial/nonmarine aquatic substrates, periodically inundated or desiccated, and therefore is commonly present in lake margin facies. The Mermia ichnofacies is associated with well oxygenated, permanent subaqueous, fine-grained substrates of hydrologically open, perennial lakes. Bathymetric zonations within the Mermia ichnofacies are complicated by the wide variability of lacustrine systems. Detected proximal-distal trends are useful within particular lake basins, but commonly difficult to extrapolate to other lakes. Other potential ichnofacies include the typically marine Skolithos ichnofacies for high-energy zones of lakes and substrate-controlled, still unnamed ichnofacies, associated to lake margin deposits. Trace fossils are useful for sedimentologic analysis of event beds. Lacustrine turbidites are characterized by low-diversity suites, reflecting colonization by opportunistic organisms after the turbidite event. Underflow current beds record animal activity contemporaneous with nearly continuous sedimentation. Ichnologic studies may also help to distinguish between marine and lacustrine turbidites. Deep-marine turbidites host the Nereites ichnofacies that consists of high diversity of ornate grazing traces and graphoglyptids, recording highly specialized feeding strategies developed to solve the problem of the scarcity of food in the deep sea. Deep lacustrine environments contain the Mermia ichnofacies, which is dominated by unspecialized grazing and feeding traces probably related to the abundance and accessibility of food in lacustrine systems. The lower diversity of lacustrine ichnofaunas in comparison with deep-sea assemblages more likely reflects lower species diversity as a consequence of less stable conditions. Increase of depth and extent of bioturbation through geologic time produced a clear signature in the ichnofabric record of lacustrine facies. Paleozoic lacustrine ichnofaunas are typically dominated by surface trails with little associated bioturbation. During the Mesozoic, bioturbation depth was higher in lake margin facies than in fully lacustrine deposits. While significant degrees of bioturbation were attained in lake margin facies during the Triassic, major biogenic disruption of primary bedding in subaqueous lacustrine deposits did not occur until the Cretaceous.

Sequence stratigraphy of upper Paleogene to Neogene carbonates exposed from Guánica bay to Guayanilla, Southern Puerto Rico.

NASA Astrophysics Data System (ADS)

Flores Hots, V. E.; Santos, H.

2016-12-01

Detailed stratigraphic columns were measured and microfacies analysis was performed in southwestern Puerto Rico to conduct a sequence stratigraphic analysis of Paleogene to Neogene strata. Two of the best exposed outcrops include the Guánica Bay and outcrops along Highway PR-132 in Guayanilla. Three depositional sequences, separated by two major sequence boundaries were found. The lower sequence occurs within the Juana Díaz Formation and is an open shelf to reef facies indicative of a Transgressive System Tract (TST), that is overlain by a High Stand System Tract (HST) marked by reef progradation. The HST in both Guánica Bay and Guayanilla is characterized by coral-rhodolith cyclicity however sections in Guánica Bay show pervasive recrystallization due to diagenetic alteration as a result of a long periods of exposure. This first sequence is Oligocene in age. The middle sequence, exposed at the eastern section of the Guánica Bay is also part of the Juana Díaz Formation and includes a turbiditic Lowstand System Tract (LST) of slope-like deposits flow, a TST constituted by coral rubble and skeletal grainstones belonging to a shallow island slope environment; and a HST that consists of an island slope chalk facies intercalated with turbidite grainstones derived storm events at the Guayanilla location. During the deposition of the middle sequence the Guánica Bay west section was topographically higher and exposed. The upper depositional sequence is Miocene in age and is composed of a TST with the transgression starting distally in the Guánica area and transgressing northward toward the Guayanilla area. These was correlated using high resolution 87Sr/86Sr isotope concentrations of shallow marine mollusks Kuphus incrassatus in the Ponce Formation at the Guánica Bay and Guayanilla locations. Facies patterns like the ones in the studied outcrops of southwestern Puerto Rico provide an exemplary environmental model of variability of paleodepositional relief, tectonic setting, variability in depositional setting of reef Sediment acumulations, the influence of storm events and variability in rock porosity by diagenetic processes yielding valuable models that may apply to potential Oligocene - Miocene hydrocarbon reservoirs.

Evidence for new resonances in the K-barN system: A prima facie case for the even-wave harmonic-oscillator model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kamath, S.G.

1978-10-01

Arguments are presented to show that the new resonance parameters obtained by Alston-Garnjost et al. in a recent analysis of the K-barN system from 365 to 1320 MeV/c provide a prima facie case for the even-wave harmonic-oscillator theory of baryonic states in the framework of SU(6)/sub W/ x O(3). A new quantum classification of the ..lambda.. states belonging to the (70,1/sup -/) is also proposed.

Analysis of Eocene depositional environments - Preliminary TM and TIMS results, Wind River Basin, Wyoming

NASA Technical Reports Server (NTRS)

Stucky, Richard K.; Krishtalka, Leonard; Redline, Andrew D.; Lang, Harold R.

1987-01-01

Both Landsat TM and aircraft Thermal IR Multispectral Scanner (TIMS) data have been used to map the lithofacies of the Wind River Basin's Eocene physical and biological environments. Preliminary analyses of these data have furnished maps of a fault contact boundary and a complex network of fluvial ribbon channel sandstones. The synoptic view thereby emerging for Eocene fluvial facies clarifies the relationships of ribbon channel sandstones to fossil-bearing overbank/floodplain facies and certain peleosols. The utility of TM and TIMS data is thereby demonstrated.

Crystallography of biological fluid as a method for evaluating its physicochemical characteristics.

PubMed

Martusevich, A K; Kamakin, N F

2007-03-01

Using an integral qualitative and quantitative approach to the studies of initiation of the biological material crystallogenesis, we showed in experiments with normal human saliva that the external characteristics of biological fluid (pH, osmolality, and environmental temperature) determine the results of crystallization (tesigraphic facies). The main external (macroenvironment) and inner (microenvironment) factors of biological fluid crystal formation, determining specific features of the tesigraphic facies, were distinguished and classified. The informative value of differential analysis of biomaterial properties by means of modulating the environmental conditions is established.

Sedimentology and paleoenvironments of the Las Chacritas carbonate paleolake, Cañadón Asfalto Formation (Jurassic), Patagonia, Argentina

NASA Astrophysics Data System (ADS)

Cabaleri, Nora G.; Benavente, Cecilia A.

2013-02-01

The Las Chacritas Member is the lower part of the Cañadón Asfalto Formation (Jurassic). The unit is a completely continental limestone succession with volcanic contributions that were deposited during the development of the Cañadón Asfalto Rift Basin (Chubut province, Patagonia, Argentina). A detailed sedimentological analysis was performed in the Fossati depocenter to determine the paleoenvironments that developed in the context of this rift. The Las Chacritas Member represents a carbonate paleolake system with ramp-shaped margins associated with wetlands that were eventually affected by subaerial exposure and pedogenesis. This process is represented by three main subenvironments: a) a lacustrine setting sensu stricto (lacustrine limestone facies association), represented by Mudstones/Wackestones containing porifera spicules (F1), Intraclastic packstones (F6) and Tabular stromatolites (F10) in which deposition and diagenesis were entirely subaqueous; b) a palustrine setting (palustrine limestone facies association) containing Microbial Mudstones (F2), Intraclastic sandy packstone with ostracode remains (F3), Oncolitic packstone (F5), Brecciated limestone (F7) and Nodular-Mottled limestone (F8) representing shallow marginal areas affected by groundwater fluctuations and minor subaerial exposure; and c) a pedogenic paleoenvironment (pedogenic limestone facies association) including Intraclastic limestone (F4) and Packstones containing Microcodium (F9) facies displaying the major features of subaerial exposure, pedogenic diagenesis and the development of paleosols. The fluvial-palustrine-lacustrine succession shows a general shallow upward trend in which contraction-expansion cycles are represented (delimited by exposure and surface erosion). The variations in the successive formations reflect the responses to fluctuations in a combination of two major controls, the tectonic and local climatic variables. The predominance of the palustrine facies associations was determined by its accommodation space as well as the local climate conditions. The variations in the lacustrine limestone facies associations reflect differential patterns of subsidence within the sub-basin. The diagnostic features of the palustrine limestone facies associations (organic matter (OM) content, microinvertebrate fauna, abundant mud cracks, brecciation, presence of evaporitic minerals) frame the sub-basin in a climatic context intermediate between arid and subhumid conditions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Handford, C.R.

Rather spotty but excellent exposures of the Cretaceous-age Turkana Grits occur near the western shore of Lake Turkana, northern Kenya. These very coarse to pebbly arkosic sandstones and sandy conglomerates were derived from and rest unconformably upon Precambrian metamorphic basement; they are overlain by late Tertiary basaltic flows that comprise much of the volcanics in the East African Rift Zone. The formation ranges up to 2000 ft thick in the Laburr Range. Several outcrops contain sauropod, crocodile, and tortoise remains as well as abundant trunks of petrified wood (Dryoxylon). Five major facies make up the Turkana Grits and record amore » major episode of continental fluvial deposition in basins flanked by Precambrian basement. Facies 1 is crudely stratified, cobble and boulder conglomerate (clast-supported); Facies 2 is crudely stratified pebble-cobble conglomerate and pebbly sandstone; Facies 3 is trough cross-bedded, very coarse sandstones containing fossils wood and vertebrate remains; Facies 4 is crudely stratified to massive sandstones with ironstone nodules; and Facies 5 is red, purple, and gray mudstone and mud shale with carbonate nodules. Facies 1 through 3 record deposition in proximal to medial braided-stream channel, longitudinal bar and dune complexes. Facies 4 is a lowland, hydromorphic paleosol, and Facies 5 represents overbank and abandoned channel-fill sedimentation in an alluvial plain.« less

Delineating Facies Spatial Distribution by Integrating Ensemble Data Assimilation and Indicator Geostatistics with Level Set Transformation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammond, Glenn Edward; Song, Xuehang; Ye, Ming

A new approach is developed to delineate the spatial distribution of discrete facies (geological units that have unique distributions of hydraulic, physical, and/or chemical properties) conditioned not only on direct data (measurements directly related to facies properties, e.g., grain size distribution obtained from borehole samples) but also on indirect data (observations indirectly related to facies distribution, e.g., hydraulic head and tracer concentration). Our method integrates for the first time ensemble data assimilation with traditional transition probability-based geostatistics. The concept of level set is introduced to build shape parameterization that allows transformation between discrete facies indicators and continuous random variables. Themore » spatial structure of different facies is simulated by indicator models using conditioning points selected adaptively during the iterative process of data assimilation. To evaluate the new method, a two-dimensional semi-synthetic example is designed to estimate the spatial distribution and permeability of two distinct facies from transient head data induced by pumping tests. The example demonstrates that our new method adequately captures the spatial pattern of facies distribution by imposing spatial continuity through conditioning points. The new method also reproduces the overall response in hydraulic head field with better accuracy compared to data assimilation with no constraints on spatial continuity on facies.« less

Petrology, sedimentology and stratigraphic implications of Black Dragon Member of the Triassic Moenkopi Formation, San Rafael Swell, Utah

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, M.A.; Ochs, S.

1990-01-01

Deposition was partly controlled by paleotopographic relief of underlying Permian strata. Triassic Black Dragon sediments filled lowlands on an erosion surface (unconformity) cut into the Permian White Rim Sandstone and Kaibab Limestone. The Black Dragon Member consists of four distinct facies containing a wide variety of sedimentary structures that characterize both fluvial and tidal environments. The facies are: (1) a Chert Pebble Conglomerate (CPC) facies, characterized by calcite-cemented channel-fills of nodular and banded chert pebbles; (2) an Interbedded Sandstone, Siltstone, and Shale (SSS) facies, containing oscillation ripples and flaser bedding; (3) a large-scale Trough Cross-Stratified Sandstone (TXS) facies, consisting ofmore » 6.6-13.1 ft (2-4 m) thick sets of fine- to medium-grained sandstone; and (4) an Oolitic and Algal Limestone (OAL) facies, with cross-stratified oolitic beds, fenestral fabric, and laminated algal rip-up clasts. The CPC facies and the TXS facies were deposited by braided streams when the shoreline lay west of the San Rafael Swell. Rivers drained off and eroded localized Permian highlands, located most likely within a 62 mi (100 km) distance to the south and southeast of the study area. The SSS facies which constitutes the bulk of the Black Dragon Member, and the OAL facies are inter- and supratidal deposits formed during relative sea level highstands, when the shoreline lay within or east of the San Rafael Swell. A decrease in continent-derived sand supply and a corresponding increase in carbonate production within the OAL facies characterizes the end of Black Dragon deposition and the gradation into the overlying Sinbad Limestone Member.« less

Felsic granulite with layers of eclogite facies rocks in the Bohemian Massif; did they share a common metamorphic history?

NASA Astrophysics Data System (ADS)

Jedlicka, Radim; Faryad, Shah Wali

2017-08-01

High pressure granulite and granulite gneiss from the Rychleby Mountains in the East Sudetes form an approximately 7 km long and 0.8 km wide body, which is enclosed by amphibolite facies orthogneiss with a steep foliation. Well preserved felsic granulite is located in the central part of the body, where several small bodies of mafic granulite are also present. In comparison to other high pressure granulites in the Bohemian Massif, which show strong mineral and textural re-equilibration under granulite facies conditions, the mafic granulite samples preserve eclogite facies minerals (garnet, omphacite, kyanite, rutile and phengite) and their field and textural relations indicate that both mafic and felsic granulites shared common metamorphic history during prograde eclogite facies and subsequent granulite facies events. Garnet from both granulite varieties shows prograde compositional zoning and contains inclusions of phengite. Yttrium and REEs in garnet show typical bell-shaped distributions with no annular peaks near the grain rims. Investigation of major and trace elements zoning, including REEs distribution in garnet, was combined with thermodynamic modelling to constrain the early eclogite facies metamorphism and to estimate pressure-temperature conditions of the subsequent granulite facies overprint. The first (U)HP metamorphism occurred along a low geothermal gradient in a subduction-related environment from its initial stage at 0.8 GPa/460 °C and reached pressures up to 2.5 GPa at 550 °C. The subsequent granulite facies overprint (1.6-1.8 GPa/800-880 °C) affected the rocks only partially; by replacement of omphacite into diopside + plagioclase symplectite and by compositional modification of garnet rims. The mineral textures and the preservation of the eclogite facies prograde compositional zoning in garnet cores confirm that the granulite facies overprint was either too short or too faint to cause recrystallisation and homogenisation of the eclogite facies mineral assemblage. The results of this study are compared with other granulite massifs in the Moldanubian Zone. In addition, a possible scenario for the Variscan eclogite and subsequent granulite facies metamorphism in the Bohemian Massif is discussed.

Influence of the Atlantic inflow and Mediterranean outflow currents on late Quaternary sedimentary facies of the Gulf of Cadiz continental margin

USGS Publications Warehouse

Nelson, C.H.; Baraza, J.; Maldonado, A.; Rodero, J.; Escutia, C.; Barber, J.H.

1999-01-01

The late Quaternary pattern of sedimentary facies on the Spanish Gulf of Cadiz continental shelf results from an interaction between a number of controlling factors that are dominated by the Atlantic inflow currents flowing southeastward across the Cadiz shelf toward the Strait of Gibraltar. An inner shelf shoreface sand facies formed by shoaling waves is modified by the inflow currents to form a belt of sand dunes at 10-20 m that extends deeper and obliquely down paleo-valleys as a result of southward down-valley flow. A mid-shelf Holocene mud facies progrades offshore from river mouth sources, but Atlantic inflow currents cause extensive progradation along shelf toward the southeast. Increased inflow current speeds near the Strait of Gibraltar and the strong Mediterranean outflow currents there result in lack of mud deposition and development of a reworked transgressive sand dune facies across the entire southernmost shelf. At the outer shelf edge and underlying the mid-shelf mud and inner shelf sand facies is a late Pleistocene to Holocene transgressive sand sheet formed by the eustatic shoreline advance. The late Quaternary pattern of contourite deposits on the Spanish Gulf of Cadiz continental slope results from an interaction between linear diapiric ridges that are oblique to slope contours and the Mediterranean outflow current flowing northwestward parallel to the slope contours and down valleys between the ridges. Coincident with the northwestward decrease in outflow current speeds from the Strait there is the following northwestward gradation of contourite sediment facies: (1) upper slope sand to silt bed facies, (2) sand dune facies on the upstream mid-slope terrace, (3) large mud wave facies on the lower slope, (4) sediment drift facies banked against the diapiric ridges, and (5) valley facies between the ridges. The southeastern sediment drift facies closest to Gibraltar contains medium-fine sand beds interbedded with mud. The adjacent valley floor facies is composed of gravelly, shelly coarse to medium sand lags and large sand dunes on the valley margins. By comparison, the northwestern drift contains coarse silt interbeds and the adjacent valley floors exhibit small to medium sand dunes of fine sand. Because of the complex pattern of contour-parallel and valley-perpendicular flow paths of the Mediterranean outflow current, the larger-scale bedforms and coarser-grained sediment of valley facies trend perpendicular to the smaller-scale bedforms and finer-grained contourite deposits of adjacent sediment drift facies. Radiocarbon ages verify that the inner shelf shoreface sand facies (sedimentation rate 7.1 cm/kyr), mid-shelf mud facies (maximum rate 234 cm/kyr) and surface sandy contourite layer of 0.2-1.2 m thickness on the Cadiz slope (1-12 cm/kyr) have deposited during Holocene time when high sea level results in maximum water depth over the Gibraltar sill and full development of the Atlantic inflow and Mediterranean outflow currents. The transgressive sand sheet of the shelf, and the mud layer underlying the surface contourite sand sheet of the slope, correlate, respectively, with the late Pleistocene sea level lowstand and apparent weak Mediterranean outflow current.

In situ rutile petrochronology: texture-related T, Paleoproterozoic inheritance and a Pan-African overprint in the oldest subduction-related eclogites, Usagaran Orogen, Tanzania

NASA Astrophysics Data System (ADS)

Moeller, A.; Kraus, K.; Herms, P.; Appel, P.; Raase, P.

2014-12-01

Rutile U-Pb thermochronology is applied successfully by both TIMS and beam methods to date cooling events in mafic and metapelitic rocks, as well as in detrital studies. The Zr-in-rutile thermometer is very robust to thermal diffusion, and generally requires complete recrystallization to change recorded crystallization temperatures. Evidence for diffusion of HFSE elements in rutile is sparse; whereas U-Pb chronology generally records diffusion controlled cooling from the last event. This study follows conventional thermobarometry and U-Pb TIMS results on monazite, sphene and rutile of Möller et al. (1995) establishing a 2 Ga eclogite facies event from MORB-like metabasic, and metapelitic rocks in the Usagaran Orogen of Tanzania, interpreted to be the oldest outcrops of subduction-related eclogites. Rutile from both rock types were discordant near a ca. 500 Ma lower intercept, confirming a thermal overprint postulated on the basis of K-Ar and Rb-Sr mica ages by e.g. Wendt et al. (1972). The age of the eclogite-facies event was confirmed by U-Pb zircon dating of a 1991±2 Ma crosscutting pegmatite (Collins et al., 1999). We present in situ LA-ICP-MS rutile petrochronology on five metabasic and metapelitic eclogite facies samples with variable retrograde amphibolite-facies recrystallization. Thermometry confirms conventional Fe-Mg results, including higher peak temperatures in metabasites. Traverses on rutile inclusions in large garnet prophyroblasts in metapelites show increasing temperatures from cores outwards and a slight decrease towards outermost rims, with peak T coinciding with highest Mg# and highest grossular content, hence consistent with preservation of prograde zoning in the garnets and a brief eclogite facies event. Large rutiles (800μm) in recrystallized samples record temperature zoning profiles. U-Pb results show inheritance of near concordant 2 Ga domains, but dominantly confirm the ca. 490 Ma amphibolite facies overprint. The study is an excellent example of the potential of in-situ rutile petrochronology in complex, polymetamorphic rocks when meticulous attention is given to textural context. Möller et al., 1995, Geology, v. 23, p. 1067-1070. Collins et al., 2004, Earth Planet. Sci. Lett., v. 224, p. 175-192. Wendt et al., 1972, 24th Internat. Geol. Congr., Proc., p. 295-314.

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

USGS Publications Warehouse

Lewan, M.D.; Kotarba, M.J.; Curtis, John B.; Wieclaw, D.; Kosakowski, P.

2006-01-01

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S2 generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S2 generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S2 generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen. ?? 2006 Elsevier Inc. All rights reserved.

3D Seismic Reflection Amplitude and Instantaneous Frequency Attributes in Mapping Thin Hydrocarbon Reservoir Lithofacies: Morrison NE Field and Morrison Field, Clark County, KS

NASA Astrophysics Data System (ADS)

Raef, Abdelmoneam; Totten, Matthew; Vohs, Andrew; Linares, Aria

2017-12-01

Thin hydrocarbon reservoir facies pose resolution challenges and waveform-signature opportunities in seismic reservoir characterization and prospect identification. In this study, we present a case study, where instantaneous frequency variation in response to a thin hydrocarbon pay zone is analyzed and integrated with other independent information to explain drilling results and optimize future drilling decisions. In Morrison NE Field, some wells with poor economics have resulted from well-placement incognizant of reservoir heterogeneities. The study area in Clark County, Kanas, USA, has been covered by a surface 3D seismic reflection survey in 2010. The target horizon is the Viola limestone, which continues to produce from 7 of the 12 wells drilled within the survey area. Seismic attributes extraction and analyses were conducted with emphasis on instantaneous attributes and amplitude anomalies to better understand and predict reservoir heterogeneities and their control on hydrocarbon entrapment settings. We have identified a higher instantaneous frequency, lower amplitude seismic facies that is in good agreement with distinct lithofacies that exhibit better (higher porosity) reservoir properties, as inferred from well-log analysis and petrographic inspection of well cuttings. This study presents a pre-drilling, data-driven approach of identifying sub-resolution reservoir seismic facies in a carbonate formation. This workflow will assist in placing new development wells in other locations within the area. Our low amplitude high instantaneous frequency seismic reservoir facies have been corroborated by findings based on well logs, petrographic analysis data, and drilling results.

Facies architecture of the fluvial Missão Velha Formation (Late Jurassic-Early Cretaceous), Araripe Basin, Northeast Brazil: paleogeographic and tectonic implications

NASA Astrophysics Data System (ADS)

Fambrini, Gelson Luís; Neumann, Virgínio Henrique M. L.; Menezes-Filho, José Acioli B.; Da Silva-Filho, Wellington F.; De Oliveira, Édison Vicente

2017-12-01

Sedimentological analysis of the Missão Velha Formation (Araripe Basin, northeast Brazil) is the aim of this paper through detailed facies analysis, architectural elements, depositional systems and paleocurrent data. The main facies recognized were: (i) coarse-grained conglomeratic sandstones, locally pebbly conglomerates, with abundant silicified fossil trunks and several large-to-medium trough cross-stratifications and predominantly lenticular geometry; (ii) lenticular coarse-to-medium sandstones with some granules, abundant silicified fossil wood, and large-to-medium trough cross-stratifications, cut-and fill features and mud drapes on the foresets of cross-strata, (iii) poorly sorted medium-grained sandstones with sparse pebbles and with horizontal stratification, (iv) fine to very fine silty sandstones, laminated, interlayered with (v) decimetric muddy layers with horizontal lamination and climbing-ripple cross-lamination. Nine architectural elements were recognized: CH: Channels, GB: Gravel bars and bed forms, SB: Sand bars and bedforms, SB (p): sand bedform with planar cross-stratification, OF: Overbank flow, DA: Downstream-accretion macroforms, LS: Laminated sandsheet, LA: Lateral-accretion macroforms and FF: Floodplain fines. The lithofacies types and facies associations were interpreted as having been generated by alluvial systems characterized by (i) high energy perennial braided river systems and (ii) ephemeral river systems. Aeolian sand dunes and sand sheets generated by the reworking of braided alluvial deposits can also occur. The paleocurrent measurements show a main dispersion pattern to S, SE and SW, and another to NE/E. These features imply a paleodrainage flowing into the basins of the Recôncavo-Tucano-Jatobá.

Evolving Concepts and Teaching Approaches In Tectonics and Sedimentation.

ERIC Educational Resources Information Center

Graham, Stephan Alan

1983-01-01

Discusses five recent advances in sedimentary tectonics, noting how they are incorporated into college curricula. Advances discussed include basin type, tectonic setting, facies analysis (in conjunction with basin type/setting), stratigraphic analysis of reflection seismic data, and quantitative analysis of subsidence histories of sedimentary…

Petroleum system of the Shelf Rift Basin, East China Sea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cunningham, A.C.; Armentrout, J.M.; Prebish, M.

1996-12-31

The Tertiary section of the Oujioang and Quiontang Depressions of the East China Sea Basin consists of at least eight rift-related depositional sequences identified seismically by regionally significant onlap and truncation surfaces. These sequences are calibrated by several wells including the Wenzhou 6-1-1 permitting extrapolation of petroleum system elements using seismic facies analysis. Gas and condensate correlated to non-marine source rocks and reservoired in sandstone at the Pinghu field to the north of the study area provides an known petroleum system analogue. In the Shelf Rift Basin, synrift high-amplitude parallel reflections within the graben axes correlate with coaly siltstone stratamore » and are interpreted as coastal plain and possibly lacustrine facies with source rock potential. Synrift clinoform seismic facies prograding from the northwest footwall correlate with non-marine to marginal marine conglomerate, sandstone and siltstone, and are interpreted as possible delta or fan-delta facies with reservoir potential although porosity and permeability is low within the Wenzhou 6-1-1 well. Post-rift thermal sag sequences are characterized by parallel and relatively continuous seismic reflections and locally developed clinoform packages. These facies correlate with porous and permeable marine sandstone and siltstone. Shales of potential sealing capacity occur within marine flooding intervals of both the synrift and post-rift sequences. Traps consist of differentially rotated synrift fill, and post-rift inversion anticlines. Major exploration risk factors include migration from the synrift coaly source rocks to the post-rift porous and permeable sandstones, and seismic imaging and drilling problems associated with extensive Tertiary igneous intrusions.« less

Petroleum system of the Shelf Rift Basin, East China Sea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cunningham, A.C.; Armentrout, J.M.; Prebish, M.

1996-01-01

The Tertiary section of the Oujioang and Quiontang Depressions of the East China Sea Basin consists of at least eight rift-related depositional sequences identified seismically by regionally significant onlap and truncation surfaces. These sequences are calibrated by several wells including the Wenzhou 6-1-1 permitting extrapolation of petroleum system elements using seismic facies analysis. Gas and condensate correlated to non-marine source rocks and reservoired in sandstone at the Pinghu field to the north of the study area provides an known petroleum system analogue. In the Shelf Rift Basin, synrift high-amplitude parallel reflections within the graben axes correlate with coaly siltstone stratamore » and are interpreted as coastal plain and possibly lacustrine facies with source rock potential. Synrift clinoform seismic facies prograding from the northwest footwall correlate with non-marine to marginal marine conglomerate, sandstone and siltstone, and are interpreted as possible delta or fan-delta facies with reservoir potential although porosity and permeability is low within the Wenzhou 6-1-1 well. Post-rift thermal sag sequences are characterized by parallel and relatively continuous seismic reflections and locally developed clinoform packages. These facies correlate with porous and permeable marine sandstone and siltstone. Shales of potential sealing capacity occur within marine flooding intervals of both the synrift and post-rift sequences. Traps consist of differentially rotated synrift fill, and post-rift inversion anticlines. Major exploration risk factors include migration from the synrift coaly source rocks to the post-rift porous and permeable sandstones, and seismic imaging and drilling problems associated with extensive Tertiary igneous intrusions.« less

Sedimentary facies and environmental ichnology of a ?Permian playa-lake complex in western Argentina

USGS Publications Warehouse

Zhang, G.; Buatois, L.A.; Mangano, M.G.; Acenolaza, F.G.

1998-01-01

A moderately diverse arthropod icnofauna occurs in ?Permian ephemeral lacustrine deposits of the Paganzo Basin that crop out at Bordo Atravesado, Cuesta de Miranda, western Argentina. Sedimentary successions are interpreted as having accumulated in a playa-lake complex. Deposits include three sedimentary facies: (A) laminated siltstone and mudstone: (B) current-rippled cross-laminated very fine grained sandstone: and (C) climbing and wave-rippled cross-laminated fine-grained sandstone deposited by sheet floods under wave influence in the playa-lake complex. Analysis of facies sequences suggests that repeated vertical facies associations result from transgressive regressive episodes of variable time spans. The Bordo Atravesado ichnofauna includes Cruziana problematica, Diplocraterion isp., cf. Diplopadichnus biformis, Kouphichnium? isp., Merostomichnites aicunai, Mirandaichnium famatinense, Monomorphichnus lineatus, Palaeophyeus tubularis, Umfolozia sinuosa and Umfolozia ef. U. longula. The assemblage is largely dominated by arthropod trackways and represents an example of the Scoyenia ichnofacies. Trace fossils are mostly preserved as hypichnial ridges on the soles of facies C beds, being comparatively rare in facies A and B. Ichnofossil preservation was linked to rapid influx of sand via sheet floods entering into the lake. Four taphonomic variants (types 1-4) are recognized, each determined by substrate consistency and time averaging. Type 1 is recorded by the presence of low density assemblages consisting of poorly defined trackways, which suggests that arthropods crawled in soft, probably slightly subaqueous substrates. Type 2 is represented by low to moderate density suites that include sharply defined trackways commonly associated with mud cracks, suggesting that the tracemakers inhabited a firm, desiccated lacustrine substrate. Type 3 displays features of types 1 and 2 and represents palimpsestic bedding surfaces, resulting from the overprint of terrestrial ichnocoenoses over previously formed softground suites. Type 4 differs from type 2 only in that assemblages display a high density of traces, recorded by numerous superimposed trackways, which suggests a major time gap of subaerial exposure before sheet flood entrance. Therefore, type 4 surfaces are mostly interpreted as track imprinted omission surfaces.

Petrologic and zircon U-Pb geochronological characteristics of the pelitic granulites from the Badu Complex of the Cathaysia Block, South China

NASA Astrophysics Data System (ADS)

Zhao, Lei; Zhou, Xiwen; Zhai, Mingguo; Liu, Bo; Cui, Xiahong

2018-06-01

The recognition of the Indosinian Orogeny in the South China block has been controversial and difficult because of strong weathering and thick cover. High temperature (HT) and high pressure (HP) metamorphic rocks related to this orogeny were considered to be absent from this orogenic belt until the recent discovery of eclogite and granulite facies meta-igneous rocks, occurring as lenses within the meta-sedimentary rocks of the Badu Complex. However, metamorphic state of these meta-sedimentary rocks is still not clear. Besides, there have been no geochronological data of HT pelitic granulites previously reported from the Badu Complex. This paper presents petrographic characteristics and zircon geochronological results on the newly discovered kyanite garnet gneiss, pyroxene garnet gneiss and the HT pelitic granulites (sillimanite garnet gneiss). Mineral assemblages are garnet + sillimanite + ternary feldspar + plagioclase + quartz + biotite for the HT pelitic granulite, kyanite + ternary feldspar + garnet + sillimanite + plagioclase + quartz + biotite for the kyanite garnet gneiss, and garnet + biotite + pyroxene + plagioclase + ternary feldspar + quartz for the pyroxene garnet gneiss, respectively. Decompressional coronas around garnet grains can be observed in all these pelitic rocks. Typical granulite facies mineral assemblages and reaction textures suggest that these rocks experienced HP granulite facies metamorphism and overprinted decompression along a clockwise P-T loop. Results from integrated U-Pb dating and REE analysis indicate the growth of metamorphic zircons from depleted heavy REE sources (100-50 chondrite) compared with detrital zircons derived from granitic sources (typically > 1000 chondrite). Metamorphic zircons in HP granulite exhibit no or subdued negative Eu anomalies, which perhaps indicate zircon overgrowth under eclogite facies conditions. The zircon overgrowth ages range from 250 to 235 Ma, suggesting that HP granulite (eclogite) to granulite facies metamorphism of these supracrustal rocks occurred in the Early-Middle Triassic. Based on the presence of HP granulite facies pelitic rocks, it is inferred that significant underthrusting was involved during the Indosinian Orogeny which introduced these supracrustal rocks to lower crustal levels.

Facies And Bedding Analysis of Deep-Marine, Arc-Related, Sediementary Rocks Cored on International Ocean Drilling Program Expedition 351.

NASA Astrophysics Data System (ADS)

Johnson, K. E.; Marsaglia, K. M.

2015-12-01

The Izu-Bonin-Mariana (IBM) Arc System, south of Japan, hosts a multitude of active and extinct (remnant) arc volcanic sediment sources. Core extracted adjacent to the proto-IBM arc (Kyushu-Palau Ridge; KPR) in the Amami-Sankaku Basin on International Ocean Discovery Program (IODP) Expedition 351 contains evidence of the variety of sediment sources that have existed in the area as a result of changing tectonic regimes through arc development, backarc basin formation and remnant arc abandonment. Approximately 1000 meters of Eocene to Oligocene volcaniclastic sedimentary rocks were analyzed via shipboard core photos, core descriptions, and thin sections with the intention of understanding the depositional history at this site. These materials contain a crucial record of arc development complementary to the Neogene history preserved in the active reararc (Expedition 350) and compressed whole-arc record in the current forearc (Expedition 352). A database of stratigraphic columns was created to display grain size trends, facies changes, and bedding characteristics. Individual beds (depositional events) were classified using existing and slightly modified classification schemes for muddy, sandy and gravel-rich gravity flow deposits, as well as muddy debris flows and tuffs. Utilizing the deep marine facies classes presented by Pickering et al. (1986), up section changes are apparent. Through time, as the arc developed, facies and bedding types and their proportions change dramatically and relatively abruptly. Following arc initiation facies are primarily mud-rich with intercalated tuffaceous sand. In younger intervals, sand to gravel gravity-flow deposits dominate, becoming more mud-rich. Muddy gravity flow deposits, however, dominate farther upsection. The overall coarsening-upward pattern (Unit III) is consistent with building of the arc edifice. Farther upsection (Unit II) an abrupt fining-upward trend represents the onset of isolation of the KPR as backarc spreading in the Shikoku Basin was initiated. This information will be combined with volcanic provenance and geochemical information from other studies, ultimately creating a deep-marine facies model for intraoceanic arc systems.

Generation of sedimentary fabrics and facies by repetitive excavation and storm infilling of burrow networks Holocene of south Florida and Caicos Platform, B. W. I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tedesco, L.P.; Wanless, H.R.

Excavation of deep, open burrow networks and subsequent infilling with sediment from the surface produces an entirely new sedimentary deposit and results in obliteration to severe diagenetic transformation of precursor depositional facies. Repetitive excavation and infilling is responsible for creating the preserved depositional facies of many marine deposits. Excavating burrowers occur from intertidal to abyssal depths, and are important throughout the Phanerozoic. The repetitive coupling of deep, open burrow excavation with subsequent storm sediment infilling of open burrow networks is a gradual process that ultimately results in the loss of the original deposit and the generation of new lithologies, fabricsmore » and facies. The new lithologies are produced in the subsurface and possess fabrics, textures and skeletal assemblages that are not a direct reflection of either precursor facies or the surficial depositional conditions. Sedimentary facies generated by repetitive burrow excavation and infilling commonly are massively bedded and generally are mottled skeletal packstones. Skeletal grains usually are well-preserved and coarser components are concentrated in burrow networks, pockets and patches. The coarse skeletal components of burrow-generated facies are a mixture of coarse bioclasts from the precursor facies and both the coarse and fine skeletal material introduced from the sediment surface. Many so-called bioturbated or massive facies may, in fact, be primary depositional facies generated in the subsurface and represent severe diagenetic transformation of originally deposited sequences. In addition, mudstones and wackestones mottled with packstone patches may record storm sedimentation.« less

Kinematic and rheological model of exhumation of high pressure granulites in the Variscan orogenic root: example of the Blanský les granulite, Bohemian Massif, Czech Republic

NASA Astrophysics Data System (ADS)

Franěk, J.; Schulmann, K.; Lexa, O.

2006-03-01

A large-scale relict domain of granulite facies deformation fabrics has been identified within the Blanský les granulite body. The granulite facies mylonitic fabric is discordant to the dominant amphibolite facies structures of the surrounding retrograde granulite. The complex geometry of retrograde amphibolite facies fabric indicates a large-scale fold-like structure, which is interpreted to be a result of either crustal-scale buckling of an already exhumed granulite sheet or active rotation of a rigid granulite facies ellipsoidal domain in kinematic continuity with the regional amphibolite facies deformation. We argue that both concepts allow similar restoration of the original granulite facies fabrics prior to the amphibolite facies deformation and “folding”. The geometry of the granulite facies foliations coincides with the earliest fabrics in the nearby mid-crustal units suggesting complete mechanical coupling between the deep lower crust and the mid-crustal levels during the vertical movements of crustal materials. Microstructures indicate grain-size sensitive flow enhanced by the presence of silicate melts at deep crustal levels and a beginning of an exhumation process of low viscosity granulites through a vertical channel. The amphibolite facies fabrics developed at middle crustal levels and their microstructures indicate significant hardening of feldspar-made rigid skeleton of the retrograde granulite. Increase in the strength of the granulite allowed an active buckling or a rigid body rotation of the granulite sheet, which acted as a strong layer inside the weaker metasediments.

Dolomites and Early Mississippian bioherms, Leadville Formation, Molas Lake, Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, L.M.

Two dolomite facies that exhibit little petrographic evidence of their original textures are interpreted to be integral parts of two bioherms. A core facies of rugose corals (Vesiculophylum), pelmatozoans, cephalopods, and brachiopods in a peloid wackestone-packstone matrix forms two mounds 50 x 40 m and 110 x 75 m in diameter and 7 and 20 m high, resting on a basal unit of foraminiferal (endothyrid) ooid, coated-grain grainstone. These mounds are surrounded and onlapped by a bedded flank facies with relic cross-bedding that forms a halo 15-40 m wide around each mound. The facies consists of very coarsely to coarselymore » crystalline dolomite, but field evidence shows that it was originally detrital and is coeval with the core facies. It grades laterally away from the core into a distal flank-intermound facies of dolomudstone interbedded with millimeter-thick laminae of dolomite peloid packstone. This facies occurs up to 100 m from the mounds. Corals in the core facies have been replaced and cemented by nonferroan, nonluminescent sparry calcite at temperatures of at least 200/sup 0/C. The matrix of micrite and skeletal grains is composed of nonferroan, red-orange luminescent calcite. Diagenetic changes have been modest. In contrast, the two flank facies show obliteration of original textures and replacement by inclusion-rich, nonferroan, red-luminescent, anhedral to subhedral dolomite at temperatures of a least 165/sup 0/C. Other than appealing to differences in original porosity and susceptibility to subsurface fluids, it is difficult to explain why these closely associated facies have followed such divergent diagenetic paths.« less

Sedimentology of SPICE (Steptoean positive carbon isotope excursion): A high-resolution trace fossil and microfabric analysis of the middle to late Cambrian Alum Shale Formation, southern Sweden

USGS Publications Warehouse

Egenhoff, Sven; Fishman, Neil; Ahlberg, Per; Maletz, Jorg; Jackson, Allison; Kolte, Ketki; Lowers, Heather; Mackie, James; Newby, Warren; Petrowsky, Matthew

2015-01-01

The Cambrian Alum Shale Formation in the Andrarum-3 core from Scania, southern Sweden, consists of black siliciclastic mudstone with minor carbonate intercalations. Four facies comprise three siliciclastic mudstones and one fine-grained carbonate. The facies reflect deposition along a transect from deep ramp to basin on a Cambrian shelf. The three mudstone facies contain abundant clay clasts and laterally variable siltstone laminae. Bed-load transport processes seem to have dominated deposition on this deep shelf. These sedimentary rocks record mainly event deposition, and only relatively few, thin laminae probably resulted from suspension settling. The Alum Shale Formation deep shelf did not show a bioturbation gradient, but fecal strings are common and Planolites burrows are rare in all mudstone facies. Evidence for biotic colonization indicates that this mudstone environment was not persistently anoxic, but rather was most likely intermittently dysoxic. The Alum Shale Formation in the Andrarum-3 core shows an overall decrease of grain size, preserved energy indicators, and carbonate content upsection interpreted to reflect a deepening upward. The succession can also be divided into four small-scale fining-upward cycles that represent deepening, and four overlying coarsening-upward cycles that represent upward shallowing.

Oil/source rock correlations in the Polish Flysch Carpathians and Mesozoic basement and organic facies of the Oligocene Menilite Shales: Insights from hydrous pyrolysis experiments

USGS Publications Warehouse

Curtis, John B.; Kotarba, M.J.; Lewan, M.D.; Wieclaw, D.

2004-01-01

The Oligocene Menilite Shales in the study area in the Polish Flysch Carpathians are organic-rich and contain varying mixtures of Type-II, Type-IIS and Type-III kerogen. The kerogens are thermally immature to marginally mature based on atomic H/C ratios and Rock-Eval data. This study defined three organic facies, i.e., sedimentary strata with differing hydrocarbon-generation potentials due to varying types and concentrations of organic matter. These facies correspond to the Silesian Unit and the eastern and western portions of the Skole Unit. Analysis of oils generated by hydrous pyrolysis of outcrop samples of Menilite Shales demonstrates that natural crude oils reservoired in the flysch sediments appear to have been generated from the Menilite Shales. Natural oils reservoired in the Mesozoic basement of the Carpathian Foredeep appear to be predominantly derived and migrated from Menilite Shales, with a minor contribution from at least one other source rock most probably within Middle Jurassic strata. Definition of organic facies may have been influenced by the heterogeneous distribution of suitable Menilite Shales outcrops and producing wells, and subsequent sample selection during the analytical phases of the study. ?? 2004 Elsevier Ltd. All rights reserved.

Facies mosaic in a fiord: Carboniferous-Permian Talchir Formation, India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bose, P.K.; Mukhopadhyay, G.; Bhattacharya, H.N.

1988-01-01

Facies analysis of the basal 37m of the Carboniferous-Permian Talchir Formation is a glacier-fed bedrock trough in Dudhi nala, Bihar, India, provides insight into the pattern of sedimentation of course gravels in a fiord. Rapid transitions between 11 recognized facies, together with their complex organization, random variability in bed thickness, and differences in clast, shape, size, and composition indicate coalescence of fans developed from numerous point sources bordering the elongated trough. Converging slide masses and lodgment tillites on the slopes flanking the trough give way to sediment gravity flow deposits composed of an array of conglomerates (matrix and clast supportedmore » with normal, inverse of absence of grading), attendant turbidite sands, and prodelta mud. The rheology of the in-trough flows ranged from plastic laminar to fluidal turbulent in response to flow from slope to floor of the trough. Rapid calving of icebergs during the onset of deglaciation established a wave regime at the mouth of the trough and deposited cross-stratified sandstone replete with dripstones. The impact of large dripstones landing triggered turbidity currents. Continued rise in water level led to eventual preservation of the fan complex under onlapping wave-built shoal facies that grade into a sequence of upward-thinning hummocky cross-stratified sandstone beds virtually devoid of dripstones.« less

Shallow marine event sedimentation in a volcanic arc-related setting: The Ordovician Suri Formation, Famatina range, northwest Argentina

USGS Publications Warehouse

Mangano, M.G.; Buatois, L.A.

1996-01-01

The Loma del Kilome??tro Member of the Lower Ordovician Suri Formation records arc-related shelf sedimentation in the Famatina Basin of northwest Argentina. Nine facies, grouped into three facies assemblages, are recognized. Facies assemblage 1 [massive and parallel-laminated mudstones (facies A) locally punctuated by normally graded or parallel-laminated silty sandstones (facies B] records deposition from suspension fall-out and episodic storm-induced turbidity currents in an outer shelf setting. Facies assemblage 2 [massive and parallel-laminated mudstones (facies A) interbedded with rippled-top very fine-grained sandstones (facies D)] is interpreted as the product of background sedimentation alternating with distal storm events in a middle shelf environment. Facies assemblage 3 [normally graded coarse to fine-grained sandstones (facies C); parallel-laminated to low angle cross-stratified sandstones (facies E); hummocky cross-stratified sandstones and siltstones (facies F); interstratified fine-grained sandstones and mudstones (facies G); massive muddy siltstones and sandstones (facies H); tuffaceous sandstones (facies I); and interbedded thin units of massive and parallel-laminated mudstones (facies A)] is thought to represent volcaniclastic mass flow and storm deposition coupled with subordinated suspension fall-out in an inner-shelf to lower-shoreface setting. The Loma del Kilo??metro Member records regressive-transgressive sedimentation in a storm- and mass flow-dominated high-gradient shelf. Volcano-tectonic activity was the important control on shelf morphology, while relative sea-level change influenced sedimentation. The lower part of the succession is attributed to mud blanketing during high stand and volcanic quiescence. Progradation of the inner shelf to lower shoreface facies assemblage in the middle part represents an abrupt basinward shoreline migration. An erosive-based, non-volcaniclastic, turbidite unit at the base of this package suggests a sea level fall. Pyroclastic detritus, andesites, and a non-volcanic terrain were eroded and their detritus was transported basinward and redeposited by sediment gravity flows during the low stand. The local coexistence of juvenile pyroclastic detritus and fossils suggests reworking of rare ash-falls. The upper part of the Loma del Kilo??metre Member records a transgression with no evidence of contemporaneous volcanism. Biostratinomic, paleoecologic, and ichnologic analyses support this paleoenvironmental interpretations and provide independent evidence for the dominance of episodic sedimentation in an arc-related shallow marine setting. Fossil concentrations were mainly formed by event processes, such as storms and volcaniclastic mass flows. High depositional rates inhibited formation of sediment-starved biogenic concentrations. Collectively, trace fossils belong to the Cruziana ichnofacies. Low diversity, scarcity, and presence of relatively simple forms indicate benthic activity under stressful conditions, most probably linked to high sedimentation rates. Contrasting sedimentary dynamics between 'normal shelves' and their volcaniclastic counterparts produce distinct and particular signatures in the stratigraphic record. Arc-related shelves are typified by event deposition with significant participation of sediment gravity flows, relatively high sedimentation rates, textural and mineralogical immaturity of sediments, scarcity and low diversity of trace fossils, and dominance of transported and reworked faunal assemblages genetically related to episodic processes.

Experimental Investigation on Dilation Mechanisms of Land-Facies Karamay Oil Sand Reservoirs under Water Injection

NASA Astrophysics Data System (ADS)

Lin, Botao; Jin, Yan; Pang, Huiwen; Cerato, Amy B.

2016-04-01

The success of steam-assisted gravity drainage (SAGD) is strongly dependent on the formation of a homogeneous and highly permeable zone in the land-facies Karamay oil sand reservoirs. To accomplish this, hydraulic fracturing is applied through controlled water injection to a pair of horizontal wells to create a dilation zone between the dual wells. The mechanical response of the reservoirs during this injection process, however, has remained unclear for the land-facies oil sand that has a loosely packed structure. This research conducted triaxial, permeability and scanning electron microscopy (SEM) tests on the field-collected oil sand samples. The tests evaluated the influences of the field temperature, confining stress and injection pressure on the dilation mechanisms as shear dilation and tensile parting during injection. To account for petrophysical heterogeneity, five reservoir rocks including regular oil sand, mud-rich oil sand, bitumen-rich oil sand, mudstone and sandstone were investigated. It was found that the permeability evolution in the oil sand samples subjected to shear dilation closely followed the porosity and microcrack evolutions in the shear bands. In contrast, the mudstone and sandstone samples developed distinct shear planes, which formed preferred permeation paths. Tensile parting expanded the pore space and increased the permeability of all the samples in various degrees. Based on this analysis, it is concluded that the range of injection propagation in the pay zone determines the overall quality of hydraulic fracturing, while the injection pressure must be carefully controlled. A region in a reservoir has little dilation upon injection if it remains unsaturated. Moreover, a cooling of the injected water can strengthen the dilation potential of a reservoir. Finally, it is suggested that the numerical modeling of water injection in the Karamay oil sand reservoirs must take into account the volumetric plastic strain in hydrostatic loading.

Nonpoint source solute transport normal to aquifer bedding in heterogeneous, Markov chain random fields

NASA Astrophysics Data System (ADS)

Zhang, Hua; Harter, Thomas; Sivakumar, Bellie

2006-06-01

Facies-based geostatistical models have become important tools for analyzing flow and mass transport processes in heterogeneous aquifers. Yet little is known about the relationship between these latter processes and the parameters of facies-based geostatistical models. In this study, we examine the transport of a nonpoint source solute normal (perpendicular) to the major bedding plane of an alluvial aquifer medium that contains multiple geologic facies, including interconnected, high-conductivity (coarse textured) facies. We also evaluate the dependence of the transport behavior on the parameters of the constitutive facies model. A facies-based Markov chain geostatistical model is used to quantify the spatial variability of the aquifer system's hydrostratigraphy. It is integrated with a groundwater flow model and a random walk particle transport model to estimate the solute traveltime probability density function (pdf) for solute flux from the water table to the bottom boundary (the production horizon) of the aquifer. The cases examined include two-, three-, and four-facies models, with mean length anisotropy ratios for horizontal to vertical facies, ek, from 25:1 to 300:1 and with a wide range of facies volume proportions (e.g., from 5 to 95% coarse-textured facies). Predictions of traveltime pdfs are found to be significantly affected by the number of hydrostratigraphic facies identified in the aquifer. Those predictions of traveltime pdfs also are affected by the proportions of coarse-textured sediments, the mean length of the facies (particularly the ratio of length to thickness of coarse materials), and, to a lesser degree, the juxtapositional preference among the hydrostratigraphic facies. In transport normal to the sedimentary bedding plane, traveltime is not lognormally distributed as is often assumed. Also, macrodispersive behavior (variance of the traveltime) is found not to be a unique function of the conductivity variance. For the parameter range examined, the third moment of the traveltime pdf varies from negatively skewed to strongly positively skewed. We also show that the Markov chain approach may give significantly different traveltime distributions when compared to the more commonly used Gaussian random field approach, even when the first- and second-order moments in the geostatistical distribution of the lnK field are identical. The choice of the appropriate geostatistical model is therefore critical in the assessment of nonpoint source transport, and uncertainty about that choice must be considered in evaluating the results.

Middle Jurassic continental biota and paleolandscape in the Dubinino locality (Sharypovo area, Krasnoyarsk krai)

NASA Astrophysics Data System (ADS)

Ivantsov, S. V.; Bystritskaya, L. I.; Krasnolutskii, S. A.; Lyalyuk, K. P.; Frolov, A. O.; Alekseev, A. S.

2016-09-01

On the basis of the lithological-facies analysis, it was established that deposits of the Upper Itat Subformation, comprising the Dubinino locality of the Middle Jurassic flora and insects (Sharypovo district, Krasnoyarsk krai), accumulated in alluvial and lacustrine and, to a lesser extent, floodplain environments (floodplain and alluvial fan facies). The occurrence of remains of insects, macroremains of flora, spores, and pollen allowed us to make a paleoreconstruction of an area with a strongly dissected relief: continental fresh-water reservoir (lake) with varying degree of overflow, surrounded by hills covered with gymnospermous and ginkgo forests.

Microbial facies distribution and its geological and geochemical controls at the Hanford 300 area

NASA Astrophysics Data System (ADS)

Hou, Z.; Nelson, W.; Stegen, J.; Murray, C. J.; Arntzen, E.

2015-12-01

Efforts have been made by various scientific disciplines to study hyporheic zones and characterize their associated processes. One way to approach the study of the hyporheic zone is to define facies, which are elements of a (hydrobio) geologic classification scheme that groups components of a complex system with high variability into a manageable set of discrete classes. In this study, we try to classify the hyporheic zone based on the geology, geochemistry, microbiology, and understand their interactive influences on the integrated biogeochemical distributions and processes. A number of measurements have been taken for 21 freeze core samples along the Columbia River bank in the Hanford 300 Area, and unique datasets have been obtained on biomass, pH, number of microbial taxa, percentage of N/C/H/S, microbial activity parameters, as well as microbial community attributes/modules. In order to gain a complete understanding of the geological control on these variables and processes, the explanatory variables are set to include quantitative gravel/sand/mud/silt/clay percentages, statistical moments of grain size distributions, as well as geological (e.g., Folk-Wentworth) and statistical (e.g., hierarchical) clusters. The dominant factors for major microbial and geochemical variables are identified and summarized using exploratory data analysis approaches (e.g., principal component analysis, hierarchical clustering, factor analysis, multivariate analysis of variance). The feasibility of extending the facies definition and its control of microbial and geochemical properties to larger scales is discussed.

Late Quaternary stratigraphy of the eastern Gulf of Maine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bacchus, T.S.; Belknap, D.F.

1993-03-01

Five distinct seismic facies describe the glacial, glacial-marine and postglacial sediments in the eastern Gulf of Maine. Regional cross-sections clearly document differences in the glacial-marine and postglacial stratigraphy between basins south of Truxton Swell, and Jordan basin to its north. Till occurs throughout the region as a thin veneer within basins, but thickens significantly over the ridges and swells separating basins. The ubiquitous presence of till suggests grounded ice occupied this area some time in the recent past. Ice-proximal glacial-marine (PGM) facies sediments of varying thickness mantle the entire area, occurring as a draped unit over pre-existing topography. Transitional glacial-marinemore » (TGM) facies also occur as a draped unit, but they show onlap onto basin margins. Sediments of the TGM facies are restricted to areas south of Truxton Swell. Ice-distal glacial-marine (DGM) facies sediments also mantle the entire area, but they occur primarily as a ponded, infilling unit. The nature and distribution of these glacial-marine facies within the eastern Gulf of Maine documents changes in the environment of deposition during deglaciation. In the authors model PGM facies sediments are considered to represent settling through the water column of coarse material from the base of an ice shelf. TGM facies sediments indicate retreat of this ice margin coupled with calving of large icebergs with significant amounts of coarse debris, DGM facies sediments indicate further retreat of the ice margin and a lessening of the influence of icebergs. Stepwise ice-margin retreat from south to north through a series of grounding lines and associated pinning points is evident by these time transgressive sedimentary facies that can be correlated across the region.« less

Ramp sedimentation in the Dinantian limestones of the Shannon Trough, Co. Limerick, Ireland

NASA Astrophysics Data System (ADS)

Somerville, Ian D.; Strogen, Peter

1992-08-01

During the late Chadian and Arundian (Lower Carboniferous), an extensive carbonate ramp (Limerick Ramp) developed over County Limerick, southwest Ireland, dipping northwestwards. Three distinct facies can be recognised corresponding to position on this ramp: inner, mid- and outer ramp. The inner ramp facies of oolitic and crinoidal grainstones (Herbertstown Limestone Formation) in east Limerick formed a major shoal behind which peritidal limestones were deposited. The mid-ramp facies of muddy bioclastic limestones and shales (Cooperhill facies) in north Limerick formed between fairweather and storm wave bases. The outer ramp (basinal) facies of mudstones and thin graded resedimented limestones (Rathkeale Beds) in west Limerick developed below storm wave base when fine terrigenous input was high. Later in the Arundian there was progradation of the nearshore oolitic and crinoidal grainstones over the mid-ramp facies. By the Holkerian, the deep-water basinal facies in west Limerick was buried beneath mid-ramp facies (Durnish Limestone). The initiation of the Limerick Ramp is closely related to the formation of the Shannon Trough. In the late Courceyan, accelerated subsidence in the Shannon area during deposition of Waulsortian facies marked the onset of a sag phase. Following a quiescent period in early Chadian, subsidence was renewed in the late Chadian and Arundian, when major facies changes occurred on the ramp. Comparison of the Shannon Trough with the Dublin Basin shows that in the latter, tectonic events in the Chadian and Arundian, particularly syn-sedimentary faulting, created a sharp division between platform and basinal sedimentation. Such tectonic influence is not recognised in the Shannon Trough. Here differential subsidence and eustatic sea-level changes led to more permanent ramp existence, modified only by westwards progradation.

Facies associations, depositional environments and stratigraphic framework of the Early Miocene-Pleistocene successions of the Mukah-Balingian Area, Sarawak, Malaysia

NASA Astrophysics Data System (ADS)

Murtaza, Muhammad; Rahman, Abdul Hadi Abdul; Sum, Chow Weng; Konjing, Zainey

2018-02-01

Thirty-five stratigraphic section exposed along the Mukah-Selangau road in the Mukah-Balingian area have been studied. Sedimentological and palynological data have been integrated to gain a better insight into the depositional architecture of the area. Broadly, the Mukah-Balingian area is dominated by fluvial, floodplain and estuarine related coal-bearing deposits. The Balingian, Begrih and Liang formations have been described and interpreted in terms of seven facies association. These are: FA1 - Fluvial-dominated channel facies association; FA2 - Tide-influenced channel facies association; FA3 - Tide-dominated channel facies association; FA4 - Floodplain facies association; FA5 - Estuarine central basin-mud flats facies association; FA6 - Tidal flat facies association and FA7 - Coastal swamps and marshes facies association. The Balingian Formation is characterised by the transgressive phase in the base, followed by a regressive phase in the upper part. On the basis of the occurrence of Florscheutzia trilobata with Florscheutzia levipoli, the Early to Middle Miocene age has been assigned to the Balingian Formation. The distinct facies pattern and foraminifera species found from the samples taken from the Begrih outcrop imply deposition in the intertidal flats having pronounced fluvio-tidal interactions along the paleo-margin. Foraminiferal data combined with the pronounced occurrence of Stenochlaena laurifolia suggest at least the Late Miocene age for the Begrih Formation. The internal stratigraphic architecture of the Liang Formation is a function of a combination of sea level, stable tectonic and autogenic control. Based on stratigraphic position, the Middle Pliocene to Pleistocene age for the Liang Formation is probable. The Balingian, Begrih and Liang formations display deposits of multiple regressive-transgressive cycles while the sediments were derived from the uplifted Penian high and Rajang group.

Measuring and predicting reservoir heterogeneity in complex deposystems: The fluvial-deltaic Big Injun sandstone in West Virginia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patchen, D.G.; Hohn, M.E.; Aminian, K.

1993-04-01

The purpose of this research is to develop techniques to measure and predict heterogeneities in oil reservoirs that are the products of complex deposystems. The unit chosen for study is the Lower Mississippian Big Injun sandstone, a prolific oil producer (nearly 60 fields) in West Virginia. This research effort has been designed and is being implemented as an integrated effort involving stratigraphy, structural geology, petrology, seismic study, petroleum engineering, modeling and geostatistics. Sandstone bodies are being mapped within their regional depositional systems, and then sandstone bodies are being classified in a scheme of relative heterogeneity to determine heterogeneity across depositionalmore » systems. Facies changes are being mapped within given reservoirs, and the environments of deposition responsible for each facies are being interpreted to predict the inherent relative heterogeneity of each facies. Structural variations will be correlated both with production, where the availability of production data will permit, and with variations in geologic and engineering parameters that affect production. A reliable seismic model of the Big Injun reservoirs in Granny Creek field is being developed to help interpret physical heterogeneity in that field. Pore types are being described and related to permeability, fluid flow and diagenesis, and petrographic data are being integrated with facies and depositional environments to develop a technique to use diagenesis as a predictive tool in future reservoir development. Another objective in the Big Injun study is to determine the effect of heterogeneity on fluid flow and efficient hydrocarbon recovery in order to improve reservoir management. Graphical methods will be applied to Big Injun production data and new geostatistical methods will be developed to detect regional trends in heterogeneity.« less

Measuring and predicting reservoir heterogeneity in complex deposystems: The fluvial-deltaic Big Injun sandstone in West Virginia. Annual report, September 20, 1991--September 20, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patchen, D.G.; Hohn, M.E.; Aminian, K.

1993-04-01

The purpose of this research is to develop techniques to measure and predict heterogeneities in oil reservoirs that are the products of complex deposystems. The unit chosen for study is the Lower Mississippian Big Injun sandstone, a prolific oil producer (nearly 60 fields) in West Virginia. This research effort has been designed and is being implemented as an integrated effort involving stratigraphy, structural geology, petrology, seismic study, petroleum engineering, modeling and geostatistics. Sandstone bodies are being mapped within their regional depositional systems, and then sandstone bodies are being classified in a scheme of relative heterogeneity to determine heterogeneity across depositionalmore » systems. Facies changes are being mapped within given reservoirs, and the environments of deposition responsible for each facies are being interpreted to predict the inherent relative heterogeneity of each facies. Structural variations will be correlated both with production, where the availability of production data will permit, and with variations in geologic and engineering parameters that affect production. A reliable seismic model of the Big Injun reservoirs in Granny Creek field is being developed to help interpret physical heterogeneity in that field. Pore types are being described and related to permeability, fluid flow and diagenesis, and petrographic data are being integrated with facies and depositional environments to develop a technique to use diagenesis as a predictive tool in future reservoir development. Another objective in the Big Injun study is to determine the effect of heterogeneity on fluid flow and efficient hydrocarbon recovery in order to improve reservoir management. Graphical methods will be applied to Big Injun production data and new geostatistical methods will be developed to detect regional trends in heterogeneity.« less

Sedimentological and diagenetic patterns of anhydrite deposits in the Badenian evaporite basin of the Carpathian Foredeep, southern Poland

NASA Astrophysics Data System (ADS)

Kasprzyk, Alicja

2003-05-01

Anhydrite deposits are widely distributed in the Middle Miocene Badenian evaporite basin of Poland, including the marginal sulphate platform and adjacent salt depocenter. Particular sedimentological, petrographic and geochemical characteristics of these anhydrite deposits and especially common pseudomorphic features, inherited from the precursor gypsum deposits, allow the interpretation of the original sedimentary facies. The observed facies distribution and succession (lower and upper members) reveal three distinct facies associations that record a range of depositional environments from nearshore to deeper basinal settings. Platform sulphates were deposited in subaerial and shallow-marine environments (shoreline and inner platform-lagoon system) mainly as autochthonous selenitic gypsum. This was reworked and redistributed into deeper waters (outer platform-lagoon, slope and the proximal basin floor system) to form resedimented facies composed mostly of allochthonous clastic gypsum and minor anhydrite. The general variation in petrographic and geochemical compositions of anhydrite lithofacies of the lower and upper members reflects the brine evolution, as the result of interactions between seawater, meteoric runoff and highly saline, residual pore fluids. The results indicate the importance of synsedimentary and diagenetic anhydritisation processes in formation of the Badenian anhydrite lithofacies, all of which preserve the original depositional features of the former gypsum. This also applies to the basinal anhydrite previously interpreted to have a depositional genesis. Two different genetic patterns of anhydrite have been reinforced by this study: (1) synsedimentary anhydritisation of gypsum deposits by highly concentrated brines or elevated temperatures in surficial to shallow-burial environments (lower member), and (2) successive phases (syndepositional de novo growth, early diagenetic to late diagenetic replacement of former gypsum) of anhydrite formation during progressive burial (upper member).

Sedimentary environment and facies of St Lucia Estuary Mouth, Zululand, South Africa

NASA Astrophysics Data System (ADS)

Wright, C. I.; Mason, T. R.

The St. Lucia Estuary is situated on the subtropical, predominantly microtidal Zululand coast. Modern sedimentary environments within the estuary fall into three categories: (1) barrier environments; (2) abandoned channel environments; and (3) estuarine/lagoonal environments. The barrier-associated environment includes tidal inlet channel, inlet beach face, flood-tidal delta, ebb-tidal delta, spit, backspit and aeolian dune facies. The abandoned channel environment comprises washover fan, tidal creek tidal creek delta and back-barrier lagoon facies. The estuarine/lagoonal environment includes subtidal estuarine channel, side-attached bar, channel margin, mangrove fringe and channel island facies. Each sedimentary facies is characterised by sedimentary and biogenic structures, grain-size and sedimentary processes. Vertical facies sequences produced by inlet channel migration and lagoonal infilling are sufficiently distinct to be recognized in the geological record and are typical of a prograding shoreline.

Pilot points method for conditioning multiple-point statistical facies simulation on flow data

NASA Astrophysics Data System (ADS)

Ma, Wei; Jafarpour, Behnam

2018-05-01

We propose a new pilot points method for conditioning discrete multiple-point statistical (MPS) facies simulation on dynamic flow data. While conditioning MPS simulation on static hard data is straightforward, their calibration against nonlinear flow data is nontrivial. The proposed method generates conditional models from a conceptual model of geologic connectivity, known as a training image (TI), by strategically placing and estimating pilot points. To place pilot points, a score map is generated based on three sources of information: (i) the uncertainty in facies distribution, (ii) the model response sensitivity information, and (iii) the observed flow data. Once the pilot points are placed, the facies values at these points are inferred from production data and then are used, along with available hard data at well locations, to simulate a new set of conditional facies realizations. While facies estimation at the pilot points can be performed using different inversion algorithms, in this study the ensemble smoother (ES) is adopted to update permeability maps from production data, which are then used to statistically infer facies types at the pilot point locations. The developed method combines the information in the flow data and the TI by using the former to infer facies values at selected locations away from the wells and the latter to ensure consistent facies structure and connectivity where away from measurement locations. Several numerical experiments are used to evaluate the performance of the developed method and to discuss its important properties.

Assimilating Flow Data into Complex Multiple-Point Statistical Facies Models Using Pilot Points Method

NASA Astrophysics Data System (ADS)

Ma, W.; Jafarpour, B.

2017-12-01

We develop a new pilot points method for conditioning discrete multiple-point statistical (MPS) facies simulation on dynamic flow data. While conditioning MPS simulation on static hard data is straightforward, their calibration against nonlinear flow data is nontrivial. The proposed method generates conditional models from a conceptual model of geologic connectivity, known as a training image (TI), by strategically placing and estimating pilot points. To place pilot points, a score map is generated based on three sources of information:: (i) the uncertainty in facies distribution, (ii) the model response sensitivity information, and (iii) the observed flow data. Once the pilot points are placed, the facies values at these points are inferred from production data and are used, along with available hard data at well locations, to simulate a new set of conditional facies realizations. While facies estimation at the pilot points can be performed using different inversion algorithms, in this study the ensemble smoother (ES) and its multiple data assimilation variant (ES-MDA) are adopted to update permeability maps from production data, which are then used to statistically infer facies types at the pilot point locations. The developed method combines the information in the flow data and the TI by using the former to infer facies values at select locations away from the wells and the latter to ensure consistent facies structure and connectivity where away from measurement locations. Several numerical experiments are used to evaluate the performance of the developed method and to discuss its important properties.

Coupling among Microbial Communities, Biogeochemistry, and Mineralogy across Biogeochemical Facies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stegen, James C.; Konopka, Allan; McKinely, Jim

Physical properties of sediments are commonly used to define subsurface lithofacies and these same physical properties influence subsurface microbial communities. This suggests an (unexploited) opportunity to use the spatial distribution of facies to predict spatial variation in biogeochemically relevant microbial attributes. Here, we characterize three biogeochemical facies—oxidized, reduced, and transition—within one lithofacies and elucidate relationships among facies features and microbial community biomass, diversity, and community composition. Consistent with previous observations of biogeochemical hotspots at environmental transition zones, we find elevated biomass within a biogeochemical facies that occurred at the transition between oxidized and reduced biogeochemical facies. Microbial diversity—the number ofmore » microbial taxa—was lower within the reduced facies and was well-explained by a combination of pH and mineralogy. Null modeling revealed that microbial community composition was influenced by ecological selection imposed by redox state and mineralogy, possibly due to effects on nutrient availability or transport. As an illustrative case, we predict microbial biomass concentration across a three-dimensional spatial domain by coupling the spatial distribution of subsurface biogeochemical facies with biomass-facies relationships revealed here. We expect that merging such an approach with hydro-biogeochemical models will provide important constraints on simulated dynamics, thereby reducing uncertainty in model predictions.« less

Relationships Between Magnetic Susceptibility and Sedimentary Facies Along AL Qahmah, Southern Red Sea Coast

NASA Astrophysics Data System (ADS)

Nabhan, A. I.; Yang, W.

2016-12-01

Facies and magnetic parameters of an arid siliciclastic coast were investigated in Al Qahmah, Saudi Arabia. The purpose of the survey was to map and understand the distribution of magnetic minerals in the different sedimentary facies in a 20-km2 area. Four NW-SE profiles parallel to shoreline and thirty-nine roughly perpendicular NE-SW profiles were measured. Petrographic study of sediment composition and texture of 152 samples was conducted. The coast sediments contain six lithofacies: beach, washover fan, tidal channel, eolian dune, sabkha, and wadi. The high concentration of heavy minerals in beach and dune facies causes high magnetic of susceptibility. Mineral composition of the total fraction in these facies confirms the presence of magnetite and ilmenite. The high values of susceptibility in beach and dune facies are attributed to strong winnowing and wave processes that control the pattern of transport, sorting of magnetic minerals in the beach facies. These minerals are picked up and moved by wind at low tide to form extensive low dune fields near the beach. The results showed that magnetic measurements are a sensitive and fast method, which can be used for studying the distribution of magnetic minerals in the sedimentary facies and help interpret various controlling processes.

Different reaction of the core histones H2A and H2B to red laser irradiation

NASA Astrophysics Data System (ADS)

Brill, G. E.; Egorova, A. V.; Bugaeva, I. O.; Postnov, D. E.; Ushakova, O. V.

2017-03-01

Analysis of the influence of red laser irradiation on the processes of self-assembly of the core histones H2A and H2B was performed using a wedge dehydration method. Image-analysis of facies included their qualitative characteristics and calculation of quantitative parameters with subsequent statistical processing. It was established that linearly polarized red laser light (λ - 660 nm, 1 J/cm2) significantly modified the process of self-assembly of core histone H2B, whereas the structure of the facies of H2A histone changed to a lesser extent. Histones were used in the form of aqueous salt solutions. The effect of red light seems to result from the formation of singlet oxygen by direct laser excitation of molecular oxygen.

Model complexity in carbon sequestration:A design of experiment and response surface uncertainty analysis

NASA Astrophysics Data System (ADS)

Zhang, Y.; Li, S.

2014-12-01

Geologic carbon sequestration (GCS) is proposed for the Nugget Sandstone in Moxa Arch, a regional saline aquifer with a large storage potential. For a proposed storage site, this study builds a suite of increasingly complex conceptual "geologic" model families, using subsets of the site characterization data: a homogeneous model family, a stationary petrophysical model family, a stationary facies model family with sub-facies petrophysical variability, and a non-stationary facies model family (with sub-facies variability) conditioned to soft data. These families, representing alternative conceptual site models built with increasing data, were simulated with the same CO2 injection test (50 years at 1/10 Mt per year), followed by 2950 years of monitoring. Using the Design of Experiment, an efficient sensitivity analysis (SA) is conducted for all families, systematically varying uncertain input parameters. Results are compared among the families to identify parameters that have 1st order impact on predicting the CO2 storage ratio (SR) at both end of injection and end of monitoring. At this site, geologic modeling factors do not significantly influence the short-term prediction of the storage ratio, although they become important over monitoring time, but only for those families where such factors are accounted for. Based on the SA, a response surface analysis is conducted to generate prediction envelopes of the storage ratio, which are compared among the families at both times. Results suggest a large uncertainty in the predicted storage ratio given the uncertainties in model parameters and modeling choices: SR varies from 5-60% (end of injection) to 18-100% (end of monitoring), although its variation among the model families is relatively minor. Moreover, long-term leakage risk is considered small at the proposed site. In the lowest-SR scenarios, all families predict gravity-stable supercritical CO2 migrating toward the bottom of the aquifer. In the highest-SR scenarios, supercritical CO2 footprints are relatively insignificant by the end of monitoring.

Rare earth element geochemistry of shallow carbonate outcropping strata in Saudi Arabia: Application for depositional environments prediction

NASA Astrophysics Data System (ADS)

Eltom, Hassan A.; Abdullatif, Osman M.; Makkawi, Mohammed H.; Eltoum, Isam-Eldin A.

2017-03-01

The interpretation of depositional environments provides important information to understand facies distribution and geometry. The classical approach to interpret depositional environments principally relies on the analysis of lithofacies, biofacies and stratigraphic data, among others. An alternative method, based on geochemical data (chemical element data), is advantageous because it can simply, reproducibly and efficiently interpret and refine the interpretation of the depositional environment of carbonate strata. Here we geochemically analyze and statistically model carbonate samples (n = 156) from seven sections of the Arab-D reservoir outcrop analog of central Saudi Arabia, to determine whether the elemental signatures (major, trace and rare earth elements [REEs]) can be effectively used to predict depositional environments. We find that lithofacies associations of the studied outcrop (peritidal to open marine depositional environments) possess altered REE signatures, and that this trend increases stratigraphically from bottom-to-top, which corresponds to an upward shallowing of depositional environments. The relationship between REEs and major, minor and trace elements indicates that contamination by detrital materials is the principal source of REEs, whereas redox condition, marine and diagenetic processes have minimal impact on the relative distribution of REEs in the lithofacies. In a statistical model (factor analysis and logistic regression), REEs, major and trace elements cluster together and serve as markers to differentiate between peritidal and open marine facies and to differentiate between intertidal and subtidal lithofacies within the peritidal facies. The results indicate that statistical modelling of the elemental composition of carbonate strata can be used as a quantitative method to predict depositional environments and regional paleogeography. The significance of this study lies in offering new assessments of the relationships between lithofacies and geochemical elements by using advanced statistical analysis, a method that could be used elsewhere to interpret depositional environment and refine facies models.

Patentability aspects of computational cancer models

NASA Astrophysics Data System (ADS)

Lishchuk, Iryna

2017-07-01

Multiscale cancer models, implemented in silico, simulate tumor progression at various spatial and temporal scales. Having the innovative substance and possessing the potential of being applied as decision support tools in clinical practice, patenting and obtaining patent rights in cancer models seems prima facie possible. What legal hurdles the cancer models need to overcome for being patented we inquire from this paper.

Early Cretaceous Shallow-Water Platform Carbonates of the Bolkar Mountains, Central Taurides - South Turkey: Facies Analysis and Depositional Environments

NASA Astrophysics Data System (ADS)

Solak, Cemile; Taslı, Kemal; Koç, Hayati

2016-10-01

The study area comprises southern non-metamorphic part of the Bolkar Mountains which are situated in southern Turkey, eastern part of the Central Taurides. The studied five outcrops form geologically parts of the tectonostratigraphic units called as allochthonous Aladag Unit and autochthonous Geyikdagi Unit. The aim of this study is to describe microfacies and depositional environments of the Bolkar Mountains Early Cretaceous shallow- water platform carbonates. The Lower Cretaceous is represented by continuous thick- bedded to massive dolomite sequence ranging from 100 to 150 meters thick, which only contains locally laminated limestone intercalations in the Yüğlük section and thick to very thick-bedded uniform limestones ranging from approximately 50 to 120 meters, consist of mainly laminated- fenestral mudstone, peloidal-intraclastic grainstone-packstone, bioclastic packstone- wackestone, benthic foraminiferal-intraclastic grainstone-packstone, ostracod-fenestral wackestone-mudstone, dasycladacean algal packstone-wackestone and ooidal grainstone microfacies. Based on a combination sedimantological data, facies/microfacies and micropaleontological (predominantly dasycladacean algae and diverse benthic foraminifera) analysis, it is concluded that Early Cretaceous platform carbonates of the Bolkar Mountains reflect a tidally affected tidal-flat and restricted lagoon settings. During the Berriasian- Valanginian unfavourable facies for benthic foraminifera and dolomitization were predominate. In the Hauterivian-early Aptian, the effect of dolomitization largely disappeared and inner platform conditions still prevailed showing alternations of peritidal and lagoon facies, going from peritidal plains (representing various sub-environments including supratidal, intertidal area, tidal-intertidal ponds and ooid bars) dominated by ostracod and miliolids, to dasycladacean algae-rich restricted lagoons-subtidal. These environments show a transition in the vertical and lateral directions in all studied stratigraphic sections.

Geological, geomorphological, facies and allostratigraphic maps of the Eberswalde fan delta

NASA Astrophysics Data System (ADS)

Pondrelli, M.; Rossi, A. P.; Platz, T.; Ivanov, A.; Marinangeli, L.; Baliva, A.

2011-09-01

Geological, facies, geomorphological and allostratigraphic map of the Eberswalde fan delta area are presented. The Eberswalde fan delta is proposed as a sort of prototype area to map sedimentary deposits, because of its excellent data coverage and its variability in depositional as well as erosional morphologies and sedimentary facies. We present a report to distinguish different cartographic products implying an increasing level of interpretation. The geological map - in association with the facies map - represents the most objective mapping product. Formations are distinguished on the basis of objectively observable parameters: texture, color, sedimentary structures and geographic distribution. Stratigraphic relations are evaluated using Steno's principles. Formations can be interpreted in terms of depositional environment, but an eventual change of the genetic interpretation would not lead to a change in the geological map. The geomorphological map is based on the data represented in the geological map plus the association of the morphological elements, in order to infer the depositional sub-environments. As a consequence, it is an interpretative map focused on the genetic reconstruction. The allostratigraphic map is based on the morphofacies analysis - expressed by the geomorphological map - and by the recognition of surfaces which reflect allogenic controls, such as water level fluctuations: unconformities, erosional truncations and flooding surfaces. As a consequence, this is an even more interpretative map than the geomorphological one, since it focuses on the control on the sedimentary systems. Geological maps represent the most suitable cartographic product for a systematic mapping, which can serve as a prerequisite for scientific or landing site analyses. Geomorphological and allostratographic maps are suitable tools to broaden scientific analysis or to provide scientific background to landing site selection.

The behaviour of monazite from greenschist facies phyllites to anatectic gneisses: An example from the Chugach Metamorphic Complex, southern Alaska

PubMed Central

Gasser, Deta; Bruand, Emilie; Rubatto, Daniela; Stüwe, Kurt

2012-01-01

Monazite is a common accessory mineral in various metamorphic and magmatic rocks, and is widely used for U–Pb geochronology. However, linking monazite U–Pb ages with the PT evolution of the rock is not always straightforward. We investigated the behaviour of monazite in a metasedimentary sequence ranging from greenschist facies phyllites into upper amphibolites facies anatectic gneisses, which is exposed in the Eocene Chugach Metamorphic Complex of southern Alaska. We investigated textures, chemical compositions and U–Pb dates of monazite grains in samples of differing bulk rock composition and metamorphic grade, with particular focus on the relationship between monazite and other REE-bearing minerals such as allanite and xenotime. In the greenschist facies phyllites, detrital and metamorphic allanite is present, whereas monazite is absent. In lower amphibolites facies schists (~ 550–650 °C and ≥ 3.4 kbar), small, medium-Y monazite is wide-spread (Mnz1), indicating monazite growth prior and/or simultaneous with growth of garnet and andalusite. In anatectic gneisses, new low-Y, high-Th monazite (Mnz2) crystallised from partial melts, and a third, high-Y, low-Th monazite generation (Mnz3) formed during initial cooling and garnet resorption. U–Pb SHRIMP analysis of the second and third monazite generations yields ages of ~ 55–50 Ma. Monazite became unstable and was overgrown by allanite and/or allanite/epidote/apatite coronas within retrograde muscovite- and/or chlorite-bearing shear zones. This study documents polyphase, complex monazite growth and dissolution during a single, relatively short-lived metamorphic cycle. PMID:26525358

Depositional paleoenvironments of the Lower Permian (upper Cisuralian) carbonate succession of Paso Hondo Formation in Chiapas State, southeastern Mexico

NASA Astrophysics Data System (ADS)

Torres-Martínez, Miguel A.; Barragán, Ricardo; Sour-Tovar, Francisco; González-Mora, Sergio

2017-11-01

The Paso Hondo Formation outcrops around of the Chicomuselo region, Chiapas State, Mexico. It is a Permian lithostratigraphic unit mainly composed of massive limestone which has been dated for the Artinskian-Kungurian (late Cisuralian). A microfacies analysis carried out on the carbonate rocks of a stratigraphic section, allowed for the first time the recognition of the depositional conditions that prevailed in the Chicomuselo region at the end of the Cisuralian. The facies associations studied allowed identifying different marine paleoenvironments related with a homoclinal carbonate ramp. The presence of anhydrite nodules, a mud-dominated carbonate production in euphotic zone (precursor of mudstones and packstones) and the presence of a diverse fauna mainly composed of photic-independent biota (mollusks, bryozoans, brachiopods and crinoids), indicate that the studied section was deposited in a relatively uniform low angle ramp. Thus, facies of different environments of inner ramp were detected, including those of a lagoon close to a peritidal area, with periodical restricted or open circulation, and open waters deposits influenced by the storm zone. In addition, mid-ramp facies were also observed. Facies associations of the basal levels on the studied section were mainly correlated with lagoonal shallow marine environments, being ostracods, calcispheres and peloids the dominant allochems. In contrast, there is a shift upwards to facies of open waters and mid-ramp environments, characterized by abundant skeletal grains of bryozoans, brachiopods and crinoids. The paleoenvironments recorded through the stratigraphic section were related with specific bathymetries, having a general tend towards the sea level rise. This record coincides with the global transgression event occurred during the Early Permian which have also been described for coeval localities of Texas and New Mexico in the United States and western Venezuela.

Chronology of the cave interior sediments at Gran Dolina archaeological site, Atapuerca (Spain)

NASA Astrophysics Data System (ADS)

Parés, J. M.; Álvarez, C.; Sier, M.; Moreno, D.; Duval, M.; Woodhead, J. D.; Ortega, A. I.; Campaña, I.; Rosell, J.; Bermúdez de Castro, J. M.; Carbonell, E.

2018-04-01

The so-called "Gran Dolina site" (Atapuerca mountain range, N Spain) is a karstic cavity filled by sediments during the Pleistocene, some of which contain a rich ensemble of archaeological and paleontological records. These sediments have contributed significantly to our understanding of early human dispersal in Europe but, in contrast, older, interior facies deposits have received much less of attention. The stratigraphy of Gran Dolina reveals an abrupt sedimentary change of interior to entrance facies from bottom to top, reflecting a significant paleoenvironmental change that promoted the accumulation of sediments transported from the vicinity of the cave by water or "en masse". Since the major magnetic polarity reversal known as the Matuyama-Brunhes boundary (0.78 Ma) was detected within the TD7 unit in the middle of the stratigraphic section, we carried out a new combined paleomagnetic, radiometric (U-Pb), and electron spin resonance (ESR) dating study of the lower part of the sequence in order to constrain the chronology of the interior facies at Gran Dolina. U-Pb analysis of speleothems did not produce age information as the samples proved to be extremely unradiogenic. The magnetic stratigraphy of the cave interior sediments reveals a dominant reverse magnetic polarity, coherent with a Matuyama age, and interrupted by a normal polarity magnetozone interpreted as the Jaramillo Subchron (1.0-1.1 Ma). ESR ages on quartz grains from the upper part of the interior facies sediments are coherent with such an interpretation. We conclude that the fluvial deposits (interior facies) that constitute the cave floor began accumulating before 1.2 Ma. The development of large cave entrances at Gran Dolina occurred shortly after the Jaramillo Subchron but before ca 900 ka ago.

Relationship of fluviodeltaic facies to coal deposition in the lower Fort Union formation (Palaeocene), south-western North Dakota

USGS Publications Warehouse

Belt, Edward S.; Flores, Romeo M.; Warwick, Peter D.; Conway, Kevin M.; Johnson, Kirk R.; Waskowitz, Robert S.; Rahmani, R.A.; Flores, Romeo M.

1984-01-01

Facies analysis of the Ludlow and Tongue River Members of the Palaeocene Fort Union Formation provides an understanding of the relationship between fluviodeltaic environments and associated coal deposition in the south-western Williston Basin. The Ludlow Member consists of high-constructive delta facies that interfinger with brackish-water tongues of the Cannonball Member of the Fort Union Formation. The lower part of the Ludlow Member was deposited on a lower delta plain that consisted of interdistributary crevasse and subdelta lobes. The upper part of the Ludlow Member was deposited in meander belts of the upper delta plain. The delta plain facies of the Ludlow Member is overlain by alluvial plain facies consisting of swamp, crevasse-lobe, lacustrine, and trunk meander belt deposits of the Tongue River Member. The Ludlow delta is believed to have been fed by fluvial systems that probably flowed from the Powder River Basin to the Williston Basin undeterred by the Cedar Creek Anticline. However, the evidence indicates that the Cedar Creek Anticline was prominent enough, during early Tongue River Member deposition, to cause the obstruction of the regional fluvial system flowing from the SW, and the formation of local drainage.The Ludlow Member contains 18 coal beds in the area studied, of which the T-Cross and Yule coals are as thick as 4 m (12 ft). Abandoned delta lobes served as platforms where coals formed, which in turn, were drowned by mainly fresh water and subordinate brackish water. Repetition of deltaic sedimentation, abandonment, and occupation by swamp led to preservation of the T-Cross and Oyster coals in areas as extensive as 260 km2 (< 100 miles2).

Prevalence of microdeletion 22q11 in patients with hypernasal speech due to velopharyngeal insufficiency: Expanded phenotype and clinical comparison to nondeletion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siegel-Bartelt, J.; Cytrynbaum, C.; Witzel, M.A.

1994-09-01

Microdeletion 22q11.2 has been reported as a frequent ethiology of both velocardiofacial (VCF) and DiGeorge syndromes. We have studied the prevalence of microdeletion 22q11 in a group of patients ascertained through a Speech and Language clinic presenting with (1) velopharyngeal insufficiency (VPI) and (2) difficultly in school. Growth parameters were measured, and facies were scored for features of VCF. Microdeletions were detected at locus D22S75 by FISH with probe N25 (Oncor), and at 22q11.2 with high resolution banding analysis (HRB). One child with typical VCF facies was considered to have a deletion at 22q11 with HRB, but is not deletedmore » with N25, indicating that N25 may not detect all deletion patients. An additional 8/30 children tested to date were deleted with the N25 probe. Heart defects were present in only 2/8 deletion patients: VSD/ASD and PS/AS. One N25 deletion patient was atypica; he has a tall, lanky habitus (height = 90%), and facies not characteristic of CVF. As expected, there is a trend to lower head size, smaller ear size, and more typical facies in deletion patients; however, four of the nondeletion patients also had a clinical diagnosis of VCF. Medially displaced carotid arteries were present in both groups, which is therefore not a diagnostic feature of microdeletion 22q11. Our findings indicate that the microdeletion 22q11 is frequent (26% in this series) in a population with VPI, even when not selected for typical facies. We believe this series supports the view that microdeletion 22q11 has a broader clinical phenotype than previously recognized.« less

Oil-bearing sediments of Gondwana glaciation in Oman

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levell, B.K.; Braakman, J.H.; Rutten, K.W.

1988-07-01

More than 3.5 billion bbl of oil in place have so far been discovered in reservoirs of the Al Khlata Formation of the Permian-Carboniferous lower Haushi Group in south Oman. Glacially striated pavements and boulders in exposures at Al Khlata in east-central Oman confirmed previous interpretations that the formation is, at least partly, of glacial origin. Core and wireline-log data from some 500 wells that penetrate the formation show that glacial facies are widespread in the subsurface. Shales with varvelike laminations and dropstones are present in two main layers, which extend over the larger part of south Oman and aremore » perhaps the most diagnostic facies. Diamictites are also widespread, and some, which can be correlated as sheets over thousands of square kilometers, are interpreted as true tillites. Other diamictites are interbedded with shales with varvelike laminations or unbedded siltstones and are interpreted as subaqueous glacial deposits. Ten sedimentary facies have been described in cores and outcrops. An important result of this study is a formal scheme to interpret these facies from wireline logs using quantitative analysis of density and neutron logs and qualitative information from other logs. Lateral facies relationships are complicated by syndepositional salt withdrawal and dissolution, paleorelief on the basal unconformity, and intraformational unconformities beneath regionally extensive tillites. At least three glacial phases can be recognized: an early phase, represented only by erosional remnants of diamictites, and two later phases, the last of which extended over the whole of Oman south of the Oman Mountains. Deglaciation is represented by a regional shale bed sharply overlying the diamictite sheet of this last glaciation. 19 figures, 1 table.« less

Polymetamorphic evolution of the granulite-facies Paleoproterozoic basement of the Kabul Block, Afghanistan

NASA Astrophysics Data System (ADS)

Collett, Stephen; Faryad, Shah Wali; Mosazai, Amir Mohammad

2015-08-01

The Kabul Block is an elongate crustal fragment which cuts across the Afghan Central Blocks, adjoining the Indian and Eurasian continents. Bounded by major strike slip faults and ophiolitic material thrust onto either side, the block contains a strongly metamorphosed basement consisting of some of the only quantifiably Proterozoic rocks south of the Herat-Panjshir Suture Zone. The basement rocks crop-out extensively in the vicinity of Kabul City and consist predominantly of migmatites, gneisses, schists and small amounts of higher-grade granulite-facies rocks. Granulite-facies assemblages were identified in felsic and mafic siliceous rocks as well as impure carbonates. Granulite-facies conditions are recorded by the presence of orthopyroxene overgrowing biotite in felsic rocks; by orthopyroxene overgrowing amphibole in mafic rocks and by the presence of olivine and clinohumite in the marbles. The granulite-facies assemblages are overprinted by a younger amphibolite-facies event that is characterized by the growth of garnet at the expense of the granulite-facies phases. Pressure-temperature (P-T) conditions for the granulite-facies event of around 850 °C and up to 7 kbar were calculated through conventional thermobarometry and phase equilibria modeling. The younger, amphibolite-facies event shows moderately higher pressures of up to 8.5 kbar at around 600 °C. This metamorphism likely corresponds to the dominant metamorphic event within the basement of the Kabul Block. The results of this work are combined with the litho-stratigraphic relations and recent geochronological dating to analyze envisaged Paleoproterozoic and Neoproterozoic metamorphic events in the Kabul Block.

Identification of Detrital Carbonate in East Cepu High

NASA Astrophysics Data System (ADS)

Sari, R.; Andika, I. K.; Haris, A.; Miftah, A.

2018-03-01

East Cepu High is a part of horst – graben series which formed by extensional tectonic processes during Paleogene in North East Java Basin. Due to excellent paleogeography position, the carbonate build-up was growth very well and as the main reservoir in East Cepu High. Sea level change have important factor to provide variation of facies in each carbonate buildup, one of emerging facies is detrital carbonate. Detrital carbonate indicated by onlap horizon featured with carbonate build up body. Based on paleogeography, fluctuation of sea level change and sediment source, detrital carbonate formed in leeward area in lowstand or highstand phases. Distinguish between detrital carbonate facies with other facies, advanced seismic processing performed by using continuous wavelet transform (CWT) and seismic inversion. CWT is one method of spectral decomposition used to find the frequency that represent a facies. The result from seismic inversion will support the interpretation for facies distribution. As the result, seismic data which have interval frequency 10 – 45 Hz and Acoustic Impedance (AI) value above 35000 (from cross plot between acoustic impedance and gamma ray) can be interpreted as detrital carbonate. Based on seismic interpretation, detrital carbonate facies distributed along leeward area with geometrical spreading. The lateral facies change from detrital carbonate to shale was identified which causing this facies become potential as hydrocarbon reservoir with stratigraphic trap. Based on the earlier studies, North East Java Basin have a strong hydrocarbon migration to fill the reservoir, therefore the detrital carbonate have high chance to be a new hydrocarbon prospect in this area.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, U.; Stein, R.

A 290-m-thick middle Cretaceous black shale sequence in the upper Magdalena Valley, a present-day intramontane basin located between the Central and Eastern cordilleras of Colombia, was investigated with organic-geochemical and microscopic analyses. As a result of the investigation, we were able to (1) differentiate four organic facies types, (2) estimate their source rock potential, and (3) integrated these facies into a sequence stratigraphic framework. The four organic facies types were type C, BC, B, and D. Type C contains a district terrigenous organic matter component in lowstand or highstand deposits. Organic facies type BC is characterized by an increase andmore » a better preservation of marine organic matter. BC belongs to the lower part of the transgressive systems tract. Sediments of organic facies type B have the highest amount of marine organic matter due to excellent preservation under anoxic conditions. The absence of bioturbation and the enrichment of trace metals are further implications for deposition under anoxic conditions. Facies type B is found in the upper part of the transgressive systems tract and contains the best petroleum source rock potential. Facies B occurrence coincides with sea level highstand and correlates especially with a maximum flooding in northern South America during the Turonian. Organic facies type D is also related to highstand deposits, but shows a high rate of reworking and degradation of organic matter.« less

Adaptive Conditioning of Multiple-Point Geostatistical Facies Simulation to Flow Data with Facies Probability Maps

NASA Astrophysics Data System (ADS)

Khodabakhshi, M.; Jafarpour, B.

2013-12-01

Characterization of complex geologic patterns that create preferential flow paths in certain reservoir systems requires higher-order geostatistical modeling techniques. Multipoint statistics (MPS) provides a flexible grid-based approach for simulating such complex geologic patterns from a conceptual prior model known as a training image (TI). In this approach, a stationary TI that encodes the higher-order spatial statistics of the expected geologic patterns is used to represent the shape and connectivity of the underlying lithofacies. While MPS is quite powerful for describing complex geologic facies connectivity, the nonlinear and complex relation between the flow data and facies distribution makes flow data conditioning quite challenging. We propose an adaptive technique for conditioning facies simulation from a prior TI to nonlinear flow data. Non-adaptive strategies for conditioning facies simulation to flow data can involves many forward flow model solutions that can be computationally very demanding. To improve the conditioning efficiency, we develop an adaptive sampling approach through a data feedback mechanism based on the sampling history. In this approach, after a short period of sampling burn-in time where unconditional samples are generated and passed through an acceptance/rejection test, an ensemble of accepted samples is identified and used to generate a facies probability map. This facies probability map contains the common features of the accepted samples and provides conditioning information about facies occurrence in each grid block, which is used to guide the conditional facies simulation process. As the sampling progresses, the initial probability map is updated according to the collective information about the facies distribution in the chain of accepted samples to increase the acceptance rate and efficiency of the conditioning. This conditioning process can be viewed as an optimization approach where each new sample is proposed based on the sampling history to improve the data mismatch objective function. We extend the application of this adaptive conditioning approach to the case where multiple training images are proposed to describe the geologic scenario in a given formation. We discuss the advantages and limitations of the proposed adaptive conditioning scheme and use numerical experiments from fluvial channel formations to demonstrate its applicability and performance compared to non-adaptive conditioning techniques.

Fine-Grained Turbidites: Facies, Attributes and Process Implications

NASA Astrophysics Data System (ADS)

Stow, Dorrik; Omoniyi, Bayonle

2016-04-01

Within turbidite systems, fine-grained sediments are still the poor relation and sport several contrasting facies models linked to process of deposition. These are volumetrically the dominant facies in deepwater and, from a resource perspective, they form important marginal and tight reservoirs, and have great potential for unconventional shale gas, source rocks and seals. They are also significant hosts of metals and rare earth elements. Based on a large number of studies of modern, ancient and subsurface systems, including 1000s of metres of section logging, we define the principal genetic elements of fine-grained deepwater facies, present a new synthesis of facies models and their sedimentary attributes. The principal architectural elements include: non-channelised slope-aprons, channel-fill, channel levee and overbank, turbidite lobes, mass-transport deposits, contourite drifts, basin sheets and drapes. These comprise a variable intercalation of fine-grained facies - thin-bedded and very thin-bedded turbidites, contourites, hemipelagites and pelagites - and associated coarse-grained facies. Characteristic attributes used to discriminate between these different elements are: facies and facies associations; sand-shale ratio, sand and shale geometry and dimensions, sand connectivity; sediment texture and small-scale sedimentary structures; sediment fabric and microfabric; and small-scale vertical sequences of bed thickness. To some extent, we can relate facies and attribute characteristics to different depositional environments. We identify four distinct facies models: (a) silt-laminated mud turbidites, (b) siliciclastic mud turbidites, (c) carbonate mud turbidites, (d) disorganized silty-mud turbidites, and (e) hemiturbidites. Within the grainsize-velocity matrix turbidite plot, these all fall within the region of mean size < 0.063mm, maximum grainsize (one percentile) <0.2mm, and depositional velocity 0.1-0.5 m/s. Silt-laminated turbidites and many mud turbidites reflect uniform, steady flow characteristics and a depositional sorting mechanism for silt-clay separation; whereas disorganized turbidites reflect an unsteady flow type, either as a short-lived surge or as a mud-contaminated mid-flow. Fine-grained carbonate turbidites show certain distinctive characteristics linked to the different dynamic behaviour of fine carbonate material. Hemiturbidites are the result of long-distance transport and an upward buoyancy mechanism during deposition.

Carbonate facies changes in the Upper Ordovician (Late Katian) of the Cincinnati Arch region: Implications for paleoclimate

NASA Astrophysics Data System (ADS)

Schwalbach, C. E.; Brett, C. E.; Aucoin, C. D.; Dattilo, B. F.

2015-12-01

The Upper Ordovician Rowland Member (Drakes Formation) exposed in the Cincinnati Arch region displays a suite of unusual facies that appear to record an environmental transition during the Late Ordovician. The Rowland displays four well-defined lithofacies, each containing a distinct biofacies. Proximal facies consist of green to gray shaly lime mudstones (often dolomitized), with ripples and desiccation cracks; these facies are sparsely fossiliferous, but show an abundance of infaunal filter feeders indicated by glauconite-filled burrows. These facies pass downramp into pale medium-bedded argillaceous micritic limestones, which are also sparsely fossiliferous but locally contain abundant deposit feeding organisms including brachiopods, small bryozoans, mollusks, and non-calcified algae. Select horizons yield rugosan and large colonial corals. These micritic beds often interfinger with a series of thick skeletal grainstone lenses that represent tidally influenced high-energy shoals and are exceptionally rich in well-preserved gastropods. To the north, these grainstones pass abruptly into offshore gray shaly packstone facies more typical of the Cincinnatian and contain a higher diversity of epifaunal brachiopods and ramose bryozoans. Compared to upramp facies of older Cincinnatian cycles, those of the Rowland show a greater thickness, relatively more micrite and glauconite, and higher abundance of corals and gastropods. These changes appear to be associated with a strong transgression underlain by a regional (and possibly global) lowstand erosional surface, as well as the Waynesville carbon isotope excursion. Additionally, these facies are correlative with similar transgressive facies in other regions, which also overlie regional lowstand unconformities. Increased micrite production instead of skeletal carbonates and the abundance of herbivorous? gastropods rather than echinoderms and bryozoans may indicate large-scale eutrophication and algal production. Ecologically, these events may signify a change in overall taxonomic composition and replacement of incumbent taxa that post-dates the Richmondian invasion. Together, the lithologic and biologic facies patterns of the Rowland may be associated with a rapid rise in base level and the Boda global warming event.

Cyclostratigraphy across a Mississippian carbonate ramp in the Esfahan-Sirjan Basin, Iran: implications for the amplitudes and frequencies of sea-level fluctuations along the southern margin of the Paleotethys

NASA Astrophysics Data System (ADS)

Bayet-Goll, Aram; Esfahani, Fariba Shirezadeh; Daraei, Mehdi; Monaco, Paolo; Sharafi, Mahmoud; Mohammadi, Amir Akbari

2018-03-01

The Tournaisian-Visean carbonate successions of the Esfahan-Sirjan Basin (ESB) from Sanandaj-Sirjan Zone, Iran, have been used to generate a sequence stratigraphic model that enhances facies characterization and improves paleoenvironmental interpretation of shallow marine successions deposited along the southern margin of the Paleotethys. Detailed facies analysis allowed to differentiate seven facies, which, in order of decreasing abundance, are: (1) shaly and marly, F1; (2) peloidal mudstones/wackestones, F2; (3) peloidal/bioclastic packstones, F3; (4) intraclastic/bioclastic packstones/grainstones, F4; (5) oolitic/bioclastic packstone/grainstone, F5; (6) sandy intraclastic/bioclastic grainstones, F6; (7) sandy oolitic/bioclastic grainstones, F7. The different facies can be grouped into three facies associations that correspond to different environments of a carbonate platform with ramp geometry (homoclinal), from outer ramp (F1 and F2), mid-ramp (F3, F4 and F6) to inner ramp areas (F5 and F7). Meter-scale cycles are the basic building blocks of shallow marine carbonate successions of the Tournaisian-Viséan ramp of the ESB. Small-scale cycles are stacked into medium-scale cycles that in turn are building blocks of large-scale cycles. According to the recognized facies and the stacking pattern of high-frequency cycles across the ramp, five large-scale cycles in the southeastern outcrops (Tournaisian-Viséan) and three large-scale cycles in the northwest outcrops (Viséan) related to eustatic sea-level changes can be recognized. The overall retrogradational nature of the carbonate ramp, illustrated by both vertical facies relationships and the stacking patterns of high-frequency cycles within the third-order cycles, implies that the deposition of the Tournaisian-Viséan successions mainly took place under a long-term transgressive sea-level trend. The stratigraphic architectural style of the sequences, characterized by the lack of lowstand deposits and exposure surfaces, associated with the evidence of progressive increase in the proportion of backstepping of facies belts across bounding surfaces and predominant subtidal characteristics, is in accordance with the long-term transgressive sea-level trend and greenhouse conditions during the Tournaisian-Viséan. The continued transgression on this broad shelfal platform could lead to the shutdown of the shallow water carbonate factory, reduction in sediment supply or sediment transport towards the offshore setting and the development of give-up sequences. The association of transgressive events with the deposition of thick open-marine marls/shales is a common feature in Tournaisian to Viséan times of the southern margin of the Paleotethys.

Stable iron isotopes and microbial mediation in red pigmentation of the Rosso Ammonitico (mid-late Jurassic, Verona area, Italy).

PubMed

Préat, Alain R; de Jong, Jeroen T M; Mamet, Bernard L; Mattielli, Nadine

2008-08-01

The iron (Fe) isotopic composition of 17 Jurassic limestones from the Rosso Ammonitico of Verona (Italy) have been analyzed by Multiple-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS). Such analysis allowed for the recognition of a clear iron isotopic fractionation (mean -0.8 per thousand, ranging between -1.52 to -0.06 per thousand) on a millimeter-centimeter scale between the red and grey facies of the studied formation. After gentle acid leaching, measurements of the Fe isotopic compositions gave delta(56)Fe values that were systematically lower in the red facies residues (median: -0.84 per thousand, range: -1.46 to +0.26 per thousand) compared to the grey facies residues (median: -0.08 per thousand, range: -0.34 to +0.23 per thousand). In addition, the red facies residues were characterized by a lighter delta(56)Fe signal relative to their corresponding leachates. These Fe isotopic fractionations could be a sensitive fingerprint of a biotic process; systematic isotopic differences between the red and grey facies residues, which consist of hematite and X-ray amorphous iron hydroxides, respectively, are hypothesized to have resulted from the oxidizing activity of iron bacteria and fungi in the red facies. The grey Fe isotopic data match the Fe isotopic signature of the terrestrial baseline established for igneous rocks and low-C(org) clastic sedimentary rocks. The Fe isotopic compositions of the grey laminations are consistent with the influx of detrital iron minerals and lack of microbial redox processes at the water-interface during deposition. Total Fe concentration measurements were performed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) (confirmed by concentration estimations obtained by MC-ICP-MS analyses of microdrilled samples) on five samples, and resultant values range between 0.30% (mean) in the grey facies and 1.31% (mean) in the red facies. No correlation was observed between bulk Fe content and pigmentation or between bulk Fe content and Fe isotopic compositions. The rapid transformation of the original iron oxyhydroxides to hematite could have preserved the original isotopic composition if it had occurred at about the same temperature. This paper supports the use of Fe isotopes as sensitive tracers of biological activities recorded in old sedimentary sequences that contain microfossils of iron bacteria and fungi. However, a careful interpretation of the iron isotopic fractionation in terms of biotic versus abiotic processes requires supporting data or direct observations to characterize the biological, (geo)chemical, or physical context in relation to the geologic setting. This will become even more pertinent when Fe isotopic studies are expanded to the interplanetary realm.

Non-marine carbonate facies, facies models and palaeogeographies of the Purbeck Formation (Late Jurassic to Early Cretaceous) of Dorset (Southern England).

NASA Astrophysics Data System (ADS)

Gallois, Arnaud; Bosence, Dan; Burgess, Peter

2015-04-01

Non-marine carbonates are relatively poorly understood compared with their more abundant marine counterparts. Sedimentary facies and basin architecture are controlled by a range of environmental parameters such as climate, hydrology and tectonic setting but facies models are few and limited in their predictive value. Following the discovery of extensive Early Cretaceous, non-marine carbonate hydrocarbon reservoirs in the South Atlantic, the interest of understanding such complex deposits has increased during recent years. This study is developing a new depositional model for non-marine carbonates in a semi-arid climate setting in an extensional basin; the Purbeck Formation (Upper Jurassic - Lower Cretaceous) in Dorset (Southern England). Outcrop study coupled with subsurface data analysis and petrographic study (sedimentology and early diagenesis) aims to constrain and improve published models of depositional settings. Facies models for brackish water and hypersaline water conditions of these lacustrine to palustrine carbonates deposited in the syn-rift phase of the Wessex Basin will be presented. Particular attention focusses on the factors that control the accumulation of in-situ microbialite mounds that occur within bedded inter-mound packstones-grainstones in the lower Purbeck. The microbialite mounds are located in three units (locally known as the Skull Cap, the Hard Cap and the Soft Cap) separated by three fossil soils (locally known as the Basal, the Lower and the Great Dirt Beds) respectively within three shallowing upward lacustrine sequences. These complex microbialite mounds (up to 4m high), are composed of tabular small-scale mounds (flat and long, up to 50cm high) divided into four subfacies. Many of these small-scale mounds developed around trees and branches which are preserved as moulds (or silicified wood) which are surrounded by a burrowed mudstone-wackestone collar. Subsequently a thrombolite framework developed on the upper part only within bedded inter-mound packestones-grainstones. Finally a discontinuous basal laminated subfacies can be found overlaying the fossil soils. The overall control on facies and their distribution is the tectonic control as highlighted by the activity of the two main extensional faults during Purbeck times. The tectonic control on development of microbialite mounds is indicated by their relationship with the relay ramp. Their occurrence is controlled by palaeotopography generated on sub-aerial exposure surfaces, palaesols and early conifer trees and developed mainly on the shallowest area of the lake as indicated by their relationship with the inter-mound packstone-grainstone facies and the palaeosols. The new depositional models developed in this study integrate sedimentological facies models with the syn-rift setting of the Wessex Basin to explain the distribution of the microbialite mounds.

Facies Modeling of of Dam and Hofuf Formations: Outcrop Analog of Mixed Carbonate and Siliciclastic (Miocene-Pliocene) Succession, Eastern Saudi Arabia

NASA Astrophysics Data System (ADS)

Abdullatif, O.; Yassin, M.

2012-04-01

1KFUPM This study investigates the lithofacies types distribution of the carbonate and siliciclastic rocks of Dam and Hofuf Formations in eastern Saudi Arabia. The shallow burial of these formations and limited post depositional changes allowed significant preservation of porosity at outcrop scale. The mixed carbonate-siliciclastic succession represents important reservoirs in the Mesozoic and Tertiary stratigraphic succession in the Arabian Plate.This study integrates field work sedimentological and stratigraphical and lithofacies data to model the spatial distribution of facies of this shallow marine and fluvial depositional setting. The Dam Formation is characterized by very high percentage of grain- dominated textures representing high to low energy intertidal deposits a mixed of carbonate and siliciclastic succession. The middle Miocene Dam section is dominated by intra-clasts, ooids and peloids grainstones. The Hofuf Formation represents fluvial channel and overank facies which is characterized by mudclast abd gravel-rich erosive bases overlain by pebbly conglomerates which passes upward into medium to very coarse grained massive, horizontally stratified and trough cross-stratifed sandstone facies. Lithological stratigraphic sections data distributed over the Al-lidam escarpment were correlated on the basis of facies types and sequences. This allow mapping and building a framework for modeling the spatial distribution of the carbonate and siliciclastic facies in the area. The geological model shows variations in the facies distribution patterns which mainly reflect both dynamic and static depositional controls on facies types distribution. The geological model may act as a guide for facies types distribution, and provide better understanding and prediction of reservoir quality and architecture of stratigraphically equivalent carbonate-siliciclastic successions in the subsurface.

Stratigraphy of the Mississippi-Alabama shelf and the Mobile River incised-valley system

USGS Publications Warehouse

Kindinger, Jack G.; Balson, Peter S.; Flocks, James G.; Dalrymple, Robert W.; Boyd, Ron; Zaitlin, Brian A.

1994-01-01

The Holocene incised-valley fill (estuarine facies) underlying Mobile Buy fit well into the conceptual facies model of a microtidal wave-dominated estuary. The model does not fit as well, however, with the rapidly transgressed shelf portion of the incised valley. The down dip section does not contain a clearly identifiable (from seismic profiles) estuarine facies; the valley fill is primarily fluvial and is overlain by marine shoals. In the Mobile River incised valley, the distal portion of the valley was rapidly drowned, allowing the thin estuarine facies to be reworked. The proximal portion was drowned more slowly, leaving the estuarine facies intact. Thus, the single incised valley contains two very different types of fill.

Sediments of the Dry Tortugas, south Florida, USA: Facies distribution on a ramp-like isolated carbonate platform

NASA Astrophysics Data System (ADS)

Gischler, Eberhard; Isaack, Anja; Hudson, J. Harold

2017-04-01

Four sedimentary facies may be delineated based on quantitative analysis of texture and composition of modern surface sediments on the Dry Tortugas carbonate platform. These include (1) mollusk-Halimeda wackestone, (2) mollusk packstone-to-grainstone, (3) coralgal-Halimeda grainstone, and (4) coralgal grainstone. Even though the Tortugas platform is characterized by an open circulation due to deep, broad marginal channels and a lack of a continuous surface-breaking marginal reef, facies are not distributed at random and show bathymetrical zonation. Also, facies appear to cover wide belts rather than forming a mosaic. Mollusk-Halimeda wackestone occurs in protected platform interior areas ca. 10-18 m deep. Mollusk packstone-to-grainstone occurs in more open platform interior settings adjacent to channels and in deeper outer reef areas of 14-25 m water depth. Coralgal-Halimeda grainstone is found on shallow marginal shoals (1-11 m deep), and coralgal grainstone on the somewhat deeper (3-16 m), seaward edges of these shoals. However, there is bathymetrical overlap of facies in intermediate depths of ca. 5-17 m. This limitation has implications for the interpretation of the fossil record, because changes in water depth are commonly thought to be reflected in facies changes, e.g., in sequence stratigraphy. Comparison with previous sediment studies of the 1930s, 1960s, and 1970s in the area exhibit a decrease in coral fragments and increases in coralline algal and mollusk shell fragments. These observations might be a result of environmental changes such as coral decline and die-outs during temperature events, disease, and the increase in macroalgae (due to the ecological extinction of the echinoid Diadema). The results suggest that more long-term studies are needed that further explore the influence of environmental change on reef sediment composition. Dry Tortugas surface sediments consist of lower portions of Halimeda plates and mollusk shell fragments and higher percentages of coralline algal fragments as compared to sediments of the adjacent Florida Reef Tract, possibly as a consequence of differences in platform morphology and exposure to waves and currents.

Sedimentary and chemostratigraphic record of climatic cycles in Lower Pliensbachian marl-limestone platform successions of Asturias (North Spain)

NASA Astrophysics Data System (ADS)

Bádenas, Beatriz; Aurell, Marc; Armendáriz, Maider; Rosales, Idoia; García-Ramos, José Carlos; Piñuela, Laura

2012-12-01

A combined sedimentological, lithological and chemostratigraphical (Mg/Ca, δ13C, δ18O) analysis of the Lower Pliensbachian marl-limestone platform successions exposed along the Asturias coastline (northern Spain) has resulted in the characterization of high-frequency cycles. The highest-order sedimentary cycles (i.e. elementary cycles) are centimeter- to deciemeter-thick alternations of bioclastic and muddy laminated/burrowed facies, which do not match the marl-limestone couplets. They encompass three sedimentary stages: deposition from storm-density currents (bioclastic facies), dominant lateral advection of continental terrigenous mud accumulated on to an oxygen-deficient seafloor (laminated facies), and recovery of bottom oxygenation involving the burrowing of laminated sediments (burrowed facies). The close match between the number of elementary cycles recorded during the Jamesoni Subzone in Asturias and Yorkshire (Northern England) gives support to the idea of the influence of a regional climatic factor (i.e. millennial-scale cyclicity). Decimeter- to meter-scale cycles formed by bundles of elementary cycles are thought to record orbitally driven climatic changes (precession or obliquity, depending on the time calibration considered). Lower hemicycles of bundles are dominated by marls/calcareous mudstones, with decreasing burrowing and eventual preservation of laminated facies. They formed during humid periods, which controlled an increase in freshwater and terrigenous input to the platform and quasi-estuarine circulation promoting bottom-anoxia. Upper hemicycles of bundles are dominated by burrowed and bioclastic limestones, thought to be formed under arid conditions with anti-estuarine circulation and an increase of shallow carbonate production and offshore resedimentation. Chemostratigraphic data from belemnites recorded in the muddy laminated and burrowed facies indicate that significant concomitant shifts in δ13C and δ18O occurred during the lower hemicycles of bundles (i.e., humid periods). Isotopic shifts are interpreted as reflecting changes in the balance between the proximity of the terrestrial sources, the local incursion of deeper cooler waters, the storage of organic matter within sediments, and the re-cycling of organic matter, due to long-term relative sea-level rise.

Sedimentary facies and gas accumulation model of Lower Shihezi Formation in Shenguhao area, northern Ordos basin, China

NASA Astrophysics Data System (ADS)

Lin, Weibing; Chen, Lin; Lu, Yongchao; Zhao, Shuai

2017-04-01

The Lower Shihezi formation of lower Permian series in Shenguhao develops the highest gas abundance of upper Paleozoic in China, which has already commercially produced on a large scale. The structural location of Shenguhao belongs to the transition zone of Yimeng uplift and Yishan slope of northern Ordos basin, China. Based on the data of core, well logging and seismic, the sedimentary facies and gas accumulation model have been studied in this paper. Sedimentary facies analysis shows that the braided delta is the major facies type developed in this area during the period of Lower Shihezi formation. The braided delta can be further divided into two microfacies, distributary channel and flood plain. The distributary channel sandbody develops the characteristics of scour surface, trough cross beddings and normal grading sequences. Its seismic reflection structure is with the shape of flat top and concave bottom. Its gamma-ray logging curve is mainly in a box or bell shape. The flood plain is mainly composed of thick mudstones. Its seismic reflection structure is with the shape of parallel or sub-parallel sheet. Its gamma-ray logging curve is mainly in a linear tooth shape. On the whole, the distribution of sandbody is characterized by large thickness, wide area and good continuity. Based on the analysis of the sea level change and the restoration of the ancient landform in the period of Lower Shihezi formation, the sea level relative change and morphology of ancient landform have been considered as the main controlling factors for the development and distribution of sedimentary facies. The topography was with big topographic relief, and the sea level was relatively low in the early stage of Low Shihezi formation. The sandbody distributed chiefly along the landform depressions. The sandbody mainly developed in the pattern of multiple vertical superpositions with thick layer. In the later stage, landform gradually converted to be flat, and strata tended to be gentle. With the sea level gradually increasing, the lateral continuity of sandbody gradually became worse and gradually transformed into the pattern of single and isolated. The analysis of the typical gas accumulation profile of the Lower Shihezi Formation in the study area reveals that the formation of gas pools is mainly controlled by the distribution of sedimentary facies, faults and high point of structures. Generally, the types of gas pool developed in the study area can be divided into up dip pinch out gas pool, fault block gas pool and microstructure gas pool. The coal bearing strata of the underlying Taiyuan Formation and Shanxi Formation are the main hydrocarbon source rocks of the Lower Shihezi Formation. The gas transporting channel and lateral sealing composed by fault and sandbody constitute the key to form an effective gas pool, which usually made up of good lateral sealing, great thickness and good connectivity.

An-integrated seismic approach to de-risk hydrocarbon accumulation for Pliocene deep marine slope channels, offshore West Nile Delta, Egypt

NASA Astrophysics Data System (ADS)

Othman, Adel A. A.; Bakr, Ali; Maher, Ali

2017-12-01

The Nile Delta basin is a hydrocarbon rich province that has hydrocarbon accumulations generated from biogenic and thermogenic source rocks and trapped in a clastic channel reservoirs ranging in age from Pliocene to Early Cretaceous. Currently, the offshore Nile Delta is the most active exploration and development province in Egypt. The main challenge of the studied area is that we have only one well in a channel system exceeds fifteen km length, where seismic reservoir characterization is used to de-risk development scenarios for the field by discriminating between gas sand, water sand and shale. Extracting the gas-charged geobody from the seismic data is magnificent input for 3D reservoir static modelling. Seismic data, being non-stationary in nature, have varying frequency content in time. Spectral decomposition analysis unravels the seismic signal into its initial constituent frequencies. Frequency decomposition of a seismic signal aims to characterize the time-dependent frequency response of subsurface rocks and reservoirs for imaging and mapping of bed thickness, geologic discontinuities and channel connectivity. Inversion feasibility study using crossplot between P-wave impedance (Ip) and S-wave impedance (Is) which derived from well logs (P-wave velocity, S-wave velocity and density) is applied to investigate which inversion type would be sufficient enough to discriminate between gas sand, water sand and shale. Integration between spectral analysis, inversion results and Ip vs. Is crossplot cutoffs help to generate 3D lithofacies cubes, which used to extract gas sand and water sand geobodies, which is extremely wonderful for constructing facies depositional static model in area with unknown facies distribution and sand connectivity. Therefore de-risking hydrocarbon accumulation and GIIP estimation for the field became more confident for drilling new development wells.

An integrated workflow to assess the remaining potential of mature hydrocarbon basins: a case study from Northwest Germany (Upper Jurassic/Lower Cretaceous, Lower Saxony Basin)

NASA Astrophysics Data System (ADS)

Seyfang, Björn; Aigner, Thomas; Munsterman, Dirk K.; Irmen, Anton

2017-04-01

Mature hydrocarbon provinces require a high level of geological understanding in order to extend the lives of producing fields, to replace reserves through smaller targets and to reduce the risks of exploring for more and more subtle hydrocarbon traps. Despite a large number of existing wells in the area studied in this paper, the depositional environments and the stratigraphic architecture were still poorly known. In order to improve the geological understanding, we propose a workflow to assess the remaining reservoir potential of mature hydrocarbon areas, integrating cores, cuttings, well-logs, biostratigraphy and seismic data. This workflow was developed for and is exemplified with the northwest of the Lower Saxony Basin (LSB), a mature hydrocarbon province in northwest Germany, but can be applied in a similar fashion to other areas. Systematic integration of lithofacies analysis, chrono- and sequence stratigraphy, combined with electrofacies analysis and modern digital methods like neural network-based lithology determination and 3D facies modelling provides a high-resolution understanding of the spatial facies and reservoir architecture in the study area. Despite widely correlatable litho-units in the Upper Jurassic and Lower Cretaceous in the LSB, complex heterogeneous sedimentary systems can be found in the basin's marginal parts. Two new play types were determined in the study area, showing a remaining potential for stratigraphic hydrocarbon traps. The results of this exploration scale study also provide the basis for re-evaluations on a field development scale. On a basin scale, this study may encourage further data acquisition and re-evaluations to discover previously unknown reservoirs.

Quantifying Hydro-biogeochemical Model Sensitivity in Assessment of Climate Change Effect on Hyporheic Zone Processes

NASA Astrophysics Data System (ADS)

Song, X.; Chen, X.; Dai, H.; Hammond, G. E.; Song, H. S.; Stegen, J.

2016-12-01

The hyporheic zone is an active region for biogeochemical processes such as carbon and nitrogen cycling, where the groundwater and surface water mix and interact with each other with distinct biogeochemical and thermal properties. The biogeochemical dynamics within the hyporheic zone are driven by both river water and groundwater hydraulic dynamics, which are directly affected by climate change scenarios. Besides that, the hydraulic and thermal properties of local sediments and microbial and chemical processes also play important roles in biogeochemical dynamics. Thus for a comprehensive understanding of the biogeochemical processes in the hyporheic zone, a coupled thermo-hydro-biogeochemical model is needed. As multiple uncertainty sources are involved in the integrated model, it is important to identify its key modules/parameters through sensitivity analysis. In this study, we develop a 2D cross-section model in the hyporheic zone at the DOE Hanford site adjacent to Columbia River and use this model to quantify module and parametric sensitivity on assessment of climate change. To achieve this purpose, We 1) develop a facies-based groundwater flow and heat transfer model that incorporates facies geometry and heterogeneity characterized from a field data set, 2) derive multiple reaction networks/pathways from batch experiments with in-situ samples and integrate temperate dependent reactive transport modules to the flow model, 3) assign multiple climate change scenarios to the coupled model by analyzing historical river stage data, 4) apply a variance-based global sensitivity analysis to quantify scenario/module/parameter uncertainty in hierarchy level. The objectives of the research include: 1) identifing the key control factors of the coupled thermo-hydro-biogeochemical model in the assessment of climate change, and 2) quantify the carbon consumption in different climate change scenarios in the hyporheic zone.

The stratigraphic distribution of large marine vertebrates and shell beds in the Pliocene of Tuscany

NASA Astrophysics Data System (ADS)

Dominici, Stefano; Benvenuti, Marco; Danise, Silvia

2015-04-01

The record of 337 shark fossils, 142 cetaceans and 10 sea cows from the Pliocene of Tuscany, mostly from historical museum collections, is revised. The majority of these fossils are concentrated at a few geographic sites from separated hinterland basins, on the South-Western side of the Northern Apennines. To better understand the meaning of these concentrations, the sequence stratigraphic distribution of more recent findings of large marine vertebrates is reconstructed against a high-resolution framework based on sedimentary facies analysis. These remains are usually covered by, or included in mudstones deposited far from the coast (N=12), skeletons being usually articulated, slightly displaced, and often bioeroded. A minor part of better preserved articulated skeletons is associated with sandstones from deltaic paleonenvironments (N=2). Marine mammal and shark remains may be associated with laterally-continuous shell accumulations, a type of concentration occurring at maximum flooding surfaces, separating relatively coarse-grained facies from open marine mudstones. Shell beds were bulk-sampled at 66 locations from six basins, covering a wide range of sedimentary facies, and spanning a chronologic interval of about 2.5 million years. A dataset of 62,655 mollusc specimens belonging to 496 species formed the basis of a statistical study to reconstruct the structure of the benthic communities, and to estimate paleodepths from intertidal to upper bathyal settings. Mollusc associations closely mirror the distribution of sedimentary facies, allowing for a fine tuning of the sequence stratigraphic architecture. Merging paleogeographic, stratigraphic and paleoecologic data, we conclude that the more abundant and diverse accumulations of large vertebrates took place in settings under the influence of coastal upwelling. A modern analogue occurs today in the Ligurian Sea, on the Tuscan offshore, where abundant nutrients carried by deep-marine currents of Western origin, within an otherwise oligotrophic Mediterranean Sea, sustain a rich and diverse cetacean and shark, epipelagic and mesopelagic community. The modern steep bathymetric gradient was displaced towards the East during the Pliocene, before the latest phases of uplift of the Northern Apennines. An open marine, nutrient-rich ecosystem influenced hinterland basins during major transgressive pulses, leading to a higher productivity and the formation of laterally-continuos accumulations of biogenic hard parts. A comparison with the few available studies on the sequence-stratigraphic distribution of large marine vertebrates and shell beds suggests that a model integrating high-productivity and sea level rise, favouring bone bed and shell bed formation, can be applied at other settings, and other geologic intervals.

76 FR 52561 - Timely Mailing Treated as Timely Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

... to the only ways to establish prima facie evidence of delivery of documents that have a filing... (PDS) designated under criteria established by the IRS, will constitute prima facie evidence of... taxpayers to be able to establish the postmark date and prima facie evidence of delivery when using...

Integrated loessite-paleokarst depositional system, early Pennsylvanian Molas Formation, Paradox Basin, southwestern Colorado, U.S.A.

NASA Astrophysics Data System (ADS)

Evans, James E.; Reed, Jason M.

2007-03-01

Mississippian paleokarst served as a dust trap for the oldest known Paleozoic loessite in North America. The early Pennsylvanian Molas Formation consists of loessite facies (sorted, angular, coarse-grained quartz siltstone), infiltration facies (loess redeposited as cave sediments within paleokarst features of the underlying Mississippian Leadville Limestone), colluvium facies (loess infiltrated into colluvium surrounding paleokarst towers) and fluvial facies (siltstone-rich, fluvial channel and floodplain deposits with paleosols). The depositional system evolved from an initial phase of infiltration and colluvium facies that were spatially and temporally related to the paleokarst surface, to loessite facies that mantled the paleotopography, and to fluvial facies that were intercalated with marine-deltaic rocks of the overlying Pennsylvanian Hermosa Formation. This sequence is interpreted as a response to the modification of the dust-trapping ability of the paleokarst surface. Loess was initially eroded from the surface, transported and redeposited in the subsurface by the karst paleohydrologic system, maintaining the dust-trapping ability of the paleotopographic surface. Later, the paleotopographic surface was buried when loess accumulation rates exceeded the transport capacity of the karst paleohydrologic system. These changes could have occurred because of (1) increased dust input rates in western Pangaea, (2) rising base levels and/or (3) porosity loss due to deposition within paleokarst passageways.

Critical Dynamics of Gravito-Convective Mixing in Geological Carbon Sequestration

PubMed Central

Soltanian, Mohamad Reza; Amooie, Mohammad Amin; Dai, Zhenxue; Cole, David; Moortgat, Joachim

2016-01-01

When CO2 is injected in saline aquifers, dissolution causes a local increase in brine density that can cause Rayleigh-Taylor-type gravitational instabilities. Depending on the Rayleigh number, density-driven flow may mix dissolved CO2 throughout the aquifer at fast advective time-scales through convective mixing. Heterogeneity can impact density-driven flow to different degrees. Zones with low effective vertical permeability may suppress fingering and reduce vertical spreading, while potentially increasing transverse mixing. In more complex heterogeneity, arising from the spatial organization of sedimentary facies, finger propagation is reduced in low permeability facies, but may be enhanced through more permeable facies. The connectivity of facies is critical in determining the large-scale transport of CO2-rich brine. We perform high-resolution finite element simulations of advection-diffusion transport of CO2 with a focus on facies-based bimodal heterogeneity. Permeability fields are generated by a Markov Chain approach, which represent facies architecture by commonly observed characteristics such as volume fractions. CO2 dissolution and phase behavior are modeled with the cubic-plus-association equation-of-state. Our results show that the organization of high-permeability facies and their connectivity control the dynamics of gravitationally unstable flow. We discover new flow regimes in both homogeneous and heterogeneous media and present quantitative scaling relations for their temporal evolution. PMID:27808178

Changes in Depositional Setting Reflect Rising Sealevel in Latest Holocene Sediments of the Hudson River

NASA Astrophysics Data System (ADS)

Slagle, A.; Carbotte, S. M.; Ryan, W. B.; Bell, R.; Nitsche, F. O.; McHugh, C. M.

2002-12-01

An extensive database of geophysical and sampling data in the Hudson River has been obtained in ten study areas between the New York Harbor and the Troy Dam. These data include bathymetry, bank-to-bank coverage of side-looking sonar imagery, subbottom reflection profiles, sediment cores and grabs. Geophysical properties, including gamma density, magnetic susceptibility and P-wave velocity, have been measured in a 9.3 m Vibracore (SD-30) from the near-channel tidal flats of the Tappan Zee area. Three distinct sedimentary facies have been identified, based on changes in physical properties, lithology and seismic reflections. Facies 1 is an oyster-rich unit with unstratified sediments and high sound velocities, and is found in the upper 1.5 m of core SD-30. Chirp subbottom data, which provide reflectors down to approximately 4 m depth, show a distinct horizon at 1.5 m, supporting the change seen in physical property data and lithology at this depth. A unit characterized by laminated sediments, interbedded with homogeneous layers and coquina layers, is identified as Facies 2 and is found between 1.5 and 6.1 m. This facies has high magnetic susceptibility and the appearance of discrete density cycles. The oldest unit, Facies 3, extends from 6.1 m to the base of the core at 9.3 m. It is made up of oyster-rich, unbedded sediments and thick coquina layers, and is characterized by low magnetic susceptibility. Radiocarbon dating of oysters and bivalves indicates that the different facies in SD-30 correspond to different sedimentation rates, with highest values occurring during deposition of Facies 2. The facies changes and variations in sedimentation rates are attributed to an evolving depositional environment in the tidal flats of the Tappan Zee area due to rising sealevel. Extrapolating from nearby cores that penetrate deeper into the sedimentary record, Facies 3 sits above post-glacial fluvial sands and represents the transition from a fresh to more brackish environment, suitable for development of oyster beds. The laminated sediments of Facies 2 are attributed to infilling of the tidal flats during a rapid rise in sealevel. The lack of laminated sediments and low sedimentation rates of Facies 1 are attributed to the modern wave-base dominated depositional setting in the Tappan Zee area.

Gas Hydrate Petroleum System Modeling in western Nankai Trough Area

NASA Astrophysics Data System (ADS)

Tanaka, M.; Aung, T. T.; Fujii, T.; Wada, N.; Komatsu, Y.

2017-12-01

Since 2003, we have been conducting Gas Hydrate (GH) petroleum system models covering the eastern Nankai Trough, Japan, and results of resource potential from regional model shows good match with the value depicted from seismic and log data. In this year, we have applied this method to explore GH potential in study area. In our study area, GH prospects have been identified with aid of bottom simulating reflector (BSR) and presence of high velocity anomalies above the BSR interpreted based on 3D migration seismic and high density velocity cubes. In order to understand the pathway of biogenic methane from source to GH prospects 1D-2D-3D GH petroleum system models are built and investigated. This study comprises lower Miocene to Pleistocene, deep to shallow marine sedimentary successions of Pliocene and Pleistocene layers overlain the basement. The BSR were interpreted in Pliocene and Pleistocene layers. Based on 6 interpreted sequence boundaries from 3D migration seismic and velocity data, construction of a depth 3D framework model is made and distributed by a conceptual submarine fan depositional facies model derived from seismic facies analysis and referring existing geological report. 1D models are created to analyze lithology sensitivity to temperature and vitrinite data from an exploratory well drilled in the vicinity of study area. The PSM parameters are applied in 2D and 3D modeling and simulation. Existing report of the explanatory well reveals that thermogenic origin are considered to exist. For this reason, simulation scenarios including source formations for both biogenic and thermogenic reaction models are also investigated. Simulation results reveal lower boundary of GH saturation zone at pseudo wells has been simulated with sensitivity of a few tens of meters in comparing with interpreted BSR. From sensitivity analysis, simulated temperature was controlled by different peak generation temperature models and geochemical parameters. Progressive folding and updipping layers including paleostructure can effectively assist biogenic gas migration to upward. Biogenic and Thermogenic mixing model shows that kitchen center only has a potential for generating thermogenic hydrocarbon. Our Prospect based on seismic interpretation is consistent with high GH saturation area based on 3D modeling results.

Fenofibrate-associated changes in renal function and relationship to clinical outcomes among individuals with type 2 diabetes: the Action to Control Cardiovascular Risk in Diabetes (ACCORD) experience.

PubMed

Bonds, D E; Craven, T E; Buse, J; Crouse, J R; Cuddihy, R; Elam, M; Ginsberg, H N; Kirchner, K; Marcovina, S; Mychaleckyj, J C; O'Connor, P J; Sperl-Hillen, J-A

2012-06-01

Fenofibrate has been noted to cause an elevation in serum creatinine in some individuals. Participants in the Action to Control Cardiovascular Risk in Diabetes Lipid Study were studied to better characterise who is at risk of an increase in creatinine level and to determine whether those with creatinine elevation have a differential risk of adverse renal or cardiovascular outcomes. A fenofibrate-associated creatinine increase (FACI) was defined as an increase in serum creatinine of at least 20% from baseline to month 4 in participants assigned to fenofibrate. Baseline patient characteristics, and baseline and 4-month drug, clinical, laboratory characteristics and study outcomes were examined by FACI status. Of the sample, 48% of those randomised to receive fenofibrate had at least a 20% increase in serum creatinine within 4 months. In multivariable analysis, participants who were older, male, used an ACE inhibitor at baseline, used a thiazolidinedione (TZD) at 4 months post-randomisation, had baseline CVD, and had lower baseline serum creatinine and LDL-cholesterol levels were all more likely to meet the criteria for FACI. Participants in the FACI group were also more likely to have a decrease in their serum triacylglycerol level from baseline to 4 months. No differences in study outcomes were seen by FACI criteria. Several characteristics predict a rapid rise in serum creatinine upon starting fenofibrate. Participants who met the criteria for FACI also had a greater change in triacylglycerol levels. In the setting of careful renal function surveillance and reduction of fenofibrate dose as indicated, no increase in renal disease or cardiovascular outcome was seen in those individuals demonstrating FACI. ClincalTrials.gov: NCT00000620. The ACCORD Trial was supported by grants (N01-HC-95178, N01-HC-95179, N01-HC-95180, N01-HC-95181, N01-HC-95182, N01-HC-95183, N01-HC-95184, IAA-Y1-HC-9035 and IAA-Y1-HC-1010) from the National Heart, Lung, and Blood Institute; by the National Institute of Diabetes and Digestive and Kidney Diseases, the National Institute on Aging, and the National Eye Institute; by the Centers for Disease Control and Prevention; by General Clinical Research Centers and by the Clinical and Translational Science Awards. Abbott Laboratories, Amylin Pharmaceutical, AstraZeneca Pharmaceuticals LP, Bayer HealthCare LLC, Closer Healthcare, GlaxoSmithKline Pharmaceuticals, King Pharmaceuticals, Merck, Novartis Pharmaceuticals, Novo Nordisk, Omron Healthcare, sanofi-aventis US and Takeda Pharmaceuticals provided study medications, equipment or supplies.

Nuées ardentes of 22 November 1994 at Merapi volcano, Java, Indonesia

USGS Publications Warehouse

Abdurachman, E.K.; Bourdier, J.-L.; Voight, B.

2000-01-01

Nuées ardentes associated with dome collapse on 22 November 1994, at Merapi volcano traveled to the south–southwest as far as 6.5 km, and collectively accumulated roughly 2.5–3 million cubic meters of deposits. The damaged area comprises 9.5 km2 and is covered by two nuée ardente facies, a conventional “Merapi-type”, valley-fill block-and-ash flow facies and a pyroclastic surge facies. The proximal deposits reflect the accumulation of dozens of nuées ardentes, with many subsidiary flow units. The distal deposits are more simply organized, as only a few individual events reached to distances >3.5 km. The stratigraphic relationships north of Turgo hill indicate that the surge deposits are a facies of particularly mobile nuées ardentes that also deposited channeled block-and-ash flow facies. They further suggest that the surge facies beyond the channel margins correlate laterally with a finer-grained sublayer locally developed at the base of the block-and-ash flow facies. Eyewitness reports suggest that the emplacement of the block-and-ash flow facies in the distal part of the Boyong river may have followed, by a short time interval, the destruction and deposition of the surge facies at Turgo village. The stratigraphy is in accord with the eyewitness reports. The surge facies was emplaced by a dilute surge current, detached from the same dome-collapse nuée ardente that, as a separate flow unit, subsequently emplaced the distal block-and-ash deposit in the Boyong valley. The detachment occurred at higher elevations, likely at or above the slope break at about 2000 m elevation. This flow separation enabled the surge current to shortcut over the landscape and to emplace its deposit even as the block-and-ash flow continued its tortuous southward movement in the Boyong channel. Dome-collapse nuée ardente activity formed the bulk of the eruption, which was accompanied by virtually no significant vertical summit explosive activity.

39 CFR 952.7 - Notice of answer and hearing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... supporting information and determine whether a prima facie showing has been made that Respondent is engaged... civil penalties authorized by 39 U.S.C. 3012. Where he concludes that a prima facie showing has not been made he shall dismiss the complaint. Where he concludes that a prima facie showing has been made, he...

43 CFR 4.1366 - Burdens of proof.

Code of Federal Regulations, 2011 CFR

2011-10-01

... review, OSMRE shall have the burden of going forward to establish a prima facie case as to failure to... person is seeking review, that person shall have the burden of going forward to establish a prima facie... ordered by OSMRE, OSMRE shall have the burden of going forward to establish a prima facie case that the...

Variational Bayesian Inversion of Quasi-Localized Seismic Attributes for the Spatial Distribution of Geological Facies

NASA Astrophysics Data System (ADS)

Nawaz, Muhammad Atif; Curtis, Andrew

2018-04-01

We introduce a new Bayesian inversion method that estimates the spatial distribution of geological facies from attributes of seismic data, by showing how the usual probabilistic inverse problem can be solved using an optimization framework still providing full probabilistic results. Our mathematical model consists of seismic attributes as observed data, which are assumed to have been generated by the geological facies. The method infers the post-inversion (posterior) probability density of the facies plus some other unknown model parameters, from the seismic attributes and geological prior information. Most previous research in this domain is based on the localized likelihoods assumption, whereby the seismic attributes at a location are assumed to depend on the facies only at that location. Such an assumption is unrealistic because of imperfect seismic data acquisition and processing, and fundamental limitations of seismic imaging methods. In this paper, we relax this assumption: we allow probabilistic dependence between seismic attributes at a location and the facies in any neighbourhood of that location through a spatial filter. We term such likelihoods quasi-localized.

High-pressure crystallization vs. recrystallization origin of garnet pyroxenite-eclogite within subduction related lithologies

NASA Astrophysics Data System (ADS)

Faryad, S. W.; Jedlicka, R.; Hauzenberger, C.; Racek, M.

2018-03-01

Mafic layers displaying transition between clinopyroxenite and eclogite within peridotite from felsic granulite in the Bohemian Massif (Lower Austria) have been investigated. The mafic-ultramafic bodies shared a common granulite facies metamorphism with its hosting felsic rocks, but they still preserve evidence of eclogite facies metamorphism. The selected mafic layer for this study is represented by garnet with omphacite in the core of coarse-grained clinopyroxene, while fine-grained clinopyroxene in the matrix is diopside. In addition, garnet contains inclusions of omphacite, alkali feldspars, hydrous and other phases with halogens and/or CO2. Textural relations along with compositional zoning in garnet from the clinopyroxenite-eclogite layers favour solid-state recrystallization of the precursor minerals in the inclusions and formation of garnet and omphacite during subduction. Textures and major and trace element distribution in garnet indicate two stages of garnet growth that record eclogite facies and subsequent granulite facies overprint. The possible model explaining the textural and compositional changes of minerals is that the granulite facies overprint occurred after formation and exhumation of the eclogite facies rocks.

Sedimentary facies analysis of the Mesozoic clastic rocks in Southern Peru (Tacna, 18°S): Towards a paleoenvironmental Redefinition and stratigraphic Reorganization

NASA Astrophysics Data System (ADS)

Alván, Aldo; Jacay, Javier; Caracciolo, Luca; Sánchez, Elvis; Trinidad, Inés

2018-07-01

The Mesozoic rocks of southern Peru comprise a Middle Jurassic to Early Cretaceous sedimentary sequence deposited during a time interval of approximately 34 Myr. In Tacna, these rocks are detrital and constitute the Yura Group (Callovian to Tithonian) and the Hualhuani Formation (Berriasian). Basing on robust interpretation of facies and petrographic analysis, we reconstruct the depositional settings of such units and provide a refined stratigraphic framework. Accordingly, nine types of sedimentary facies and six architectural elements are defined. They preserve the record of a progradational fluvial system, in which two styless regulated the dispersion of sediments: (i) a high-to moderate-sinuosity meandering setting (Yura Group), and a later (ii) incipient braided setting (Hualhuani Formation). The Yura Group (Callovian-Tithonian) represents the onset of floodplain deposits and lateral accretion of point-bar deposits sited on a semi-flat topography. Nonetheless, the progradational sequence was affected by at least two rapid marine ingressions occurred during Middle Callovian and Tithonian times. Such marine ingressions reveal the proximity of a shallow marine setting and incipient carbonate deposition. In response to increase in topographic gradient, the Hualhuani Formation (Berriasian) deposited as extensive multistory sandy channels. The mineralogy of the Mesozoic sediments suggests sediment supplies and intense recycling from a craton interior (i.e. Amazon Craton and/or plutonic sources) located eastward of the study area.

Assessment of the quality of water by hierarchical cluster and variance analyses of the Koudiat Medouar Watershed, East Algeria

NASA Astrophysics Data System (ADS)

Tiri, Ammar; Lahbari, Noureddine; Boudoukha, Abderrahmane

2017-12-01

The assessment of surface water in Koudiat Medouar watershed is very important especially when it comes to pollution of the dam waters by discharges of wastewater from neighboring towns in Oued Timgad, who poured into the basin of the dam, and agricultural lands located along the Oued Reboa. To this end, the multivariable method was used to evaluate the spatial and temporal variation of the water surface quality of the Koudiat Medouar dam, eastern Algeria. The stiff diagram has identified two main hydrochemical facies. The first facies Mg-HCO3 is reflected in the first sampling station (Oued Reboa) and in the second one (Oued Timgad), while the second facies Mg-SO4 is reflected in the third station (Basin Dam). The results obtained by the analysis of variance show that in the three stations all parameters are significant, except for Na, K and HCO3 in the first station (Oued Reboa) and the EC in the second station (Oued Timgad) and at the end NO3 and pH in the third station (Basin Dam). Q-mode hierarchical cluster analysis showed that two main groups in each sampling station. The chemistry of major ions (Mg, Ca, HCO3 and SO4) within the three stations results from anthropogenic impacts and water-rock interaction sources.

Stratigraphy and facies development of the marine Late Devonian near the Boulongour Reservoir, northwest Xinjiang, China

NASA Astrophysics Data System (ADS)

Suttner, Thomas J.; Kido, Erika; Chen, Xiuqin; Mawson, Ruth; Waters, Johnny A.; Frýda, Jiří; Mathieson, David; Molloy, Peter D.; Pickett, John; Webster, Gary D.; Frýdová, Barbora

2014-02-01

Late Devonian to Early Carboniferous stratigraphic units within the 'Zhulumute' Formation, Hongguleleng Formation (stratotype), 'Hebukehe' Formation and the Heishantou Formation near the Boulongour Reservoir in northwestern Xinjiang are fossil-rich. The Hongguleleng and 'Hebukehe' formations are biostratigraphically well constrained by microfossils from the latest Frasnian linguiformis to mid-Famennian trachytera conodont biozones. The Hongguleleng Formation (96.8 m) is characterized by bioclastic argillaceous limestones and marls (the dominant facies) intercalated with green spiculitic calcareous shales. It yields abundant and highly diverse faunas of bryozoans, brachiopods and crinoids with subordinate solitary rugose corals, ostracods, trilobites, conodonts and other fish teeth. The succeeding 'Hebukehe' Formation (95.7 m) consists of siltstones, mudstones, arenites and intervals of bioclastic limestone (e.g. 'Blastoid Hill') and cherts with radiolarians. A diverse ichnofauna, phacopid trilobites, echinoderms (crinoids and blastoids) together with brachiopods, ostracods, bryozoans and rare cephalopods have been collected from this interval. Analysis of geochemical data, microfacies and especially the distribution of marine organisms, which are not described in detail here, but used for facies analysis, indicate a deepening of the depositional environment at the Boulongour Reservoir section. Results presented here concern mainly the sedimentological and stratigraphical context of the investigated section. Additionally, one Late Devonian palaeo-oceanic and biotic event, the Upper Kellwasser Event is recognized near the section base.

New morphological mapping and interpretation of ejecta deposits from Orientale Basin on the Moon

NASA Astrophysics Data System (ADS)

Morse, Zachary R.; Osinski, Gordon R.; Tornabene, Livio L.

2018-01-01

Orientale Basin is one of the youngest and best-preserved multi-ring impact basins in the Solar System. The structure is ∼950 km across and is located on the western edge of the nearside of the Moon. The interior of the basin, which possesses three distinct rings and a post-impact mare fill, has been studied extensively using modern high-resolution datasets. Exterior to these rings, Orientale has an extensive ejecta blanket that extends out radially for at least 800 km from the basin rim in all directions and covers portions of both the nearside and farside of the Moon. These deposits, known as the Hevelius Formation, were first mapped using photographic data from the Lunar Orbiter IV probe. In this study, we map in detail the morphology of each distinct facies observed within the Orientale ejecta blanket using high resolution Lunar Reconnaissance Orbiter (LRO) Wide Angle Camera (WAC) and Narrow Angle Camera (NAC) images and Lunar Orbiter Laser Altimeter (LOLA) elevation data. We identified 5 unique facies within the ejecta blanket. Facies A is identified as a region of hummocky plains located in a low-lying topographic region between the Outer Rook and Cordillera rings. This facies is interpreted to be a mix of crater-derived impact melt and km-scale blocks of ballistic ejecta and host rock broken up during the modification stage and formation of the Cordillera ring. Facies B is an inner facies marked by radial grooves extending outward from the direction of the basin center. This facies is interpreted as the continuous ballistic ejecta blanket. Facies C consists of inner and outer groupings of flat smooth-surfaced deposits isolated in local topographic lows. Facies D displays characteristic sinuous ridges and lobate extensions. Facies C and D are interpreted to be impact melt-rich materials, which manifest as flows and ponds. Our observations suggest that these facies were emplaced subsequent to the ballistic ejecta blanket - most likely during the modification stage of crater formation - and flowed and ponded in topographically low-lying regions. Facies E consists of distinct crater chains emanating radially from the basin center and extending from ∼700 to ∼1000 km from the center of Orientale. This facies is considered to be chains of secondary craters formed from large blocks of ballistic ejecta. Our mapping effort shows that the individual ejecta facies were influenced and controlled to varying degrees by pre-existing slopes and topography. At the basin scale, the overall downslope direction toward the lunar lowlands to the east and southeast of the basin center resulted in large impact melt flows 100's of kilometers in length, while the regional upslope trends in the west and northwest inhibited the development of extensive impact melt flows. On a smaller scale it can be observed that ground-hugging ejecta collected behind and flowed around high topographic obstacles while diverting into topographic low regions (e.g., around uplifted pre-existing crater rims, but down into pre-existing crater floors). The dispersion of the various ejecta facies mapped here also indicates both a direction and an angle for the impact event that formed Orientale Basin. The bilateral distribution of both ballistic and impact melt-rich ejecta deposits across a line running northeast - southwest suggests the impact occurred from the northeast toward the southwest. Careful mapping of the secondary impact crater chains (Facies E) shows the development of a ;forbidden zone; lacking these impacts to the northeast as well as a concentration of the longest secondary crater chains to the northwest and southeast, perpendicular to the aforementioned line of bilateral ejecta distribution. This distribution of secondary impact craters contrasts with the circularity of the basin and suggests that Orientale Basin was formed by ∼ 25-45° impact from the northeast.

Hydrochemical facies and ground-water flow patterns in northern part of Atlantic Coastal Plain

USGS Publications Warehouse

Back, William

1966-01-01

Flow patterns of fresh ground water shown on maps and in cross sections have been deduced from available water-level data. These patterns are controlled by the distribution of the higher landmasses and by the depth to either bedrock or to the salt-water interface. The mapping of hydrochemical facies shows that at shallow depths within the Coastal Plain (less than about 200 ft) the calcium-magnesium cation facies generally predominates. The bicarbonate anion facies occurs within more of the shallow Coastal Plain sediments than does the sulfate or the chloride facies. In deeper formations, the sodium chloride character predominates. The lower dissolved-solids content of the ground water in New Jersey indicates less upward vertical leakage than in Maryland and Virginia, where the shallow formations contain solutions of higher concentration.

Hydrostratigraphic analysis of the MADE site with full-resolution GPR and direct-push hydraulic profiling

USGS Publications Warehouse

Dogan, M.; Van Dam, R. L.; Bohling, Geoffrey C.; Butler, J.J.; Hyndman, D.W.

2011-01-01

Full-resolution 3D Ground-Penetrating Radar (GPR) data were combined with high-resolution hydraulic conductivity (K) data from vertical Direct-Push (DP) profiles to characterize a portion of the highly heterogeneous MAcro Dispersion Experiment (MADE) site. This is an important first step to better understand the influence of aquifer heterogeneities on observed anomalous transport. Statistical evaluation of DP data indicates non-normal distributions that have much higher similarity within each GPR facies than between facies. The analysis of GPR and DP data provides high-resolution estimates of the 3D geometry of hydrostratigraphic zones, which can then be populated with stochastic K fields. The lack of such estimates has been a significant limitation for testing and parameterizing a range of novel transport theories at sites where the traditional advection-dispersion model has proven inadequate. ?? 2011 by the American Geophysical Union.

Metamorphic P-T evolution of the Gotsu blueschists from the Suo metamorphic belt in SW Japan: Implications for tectonic correlation with the Heilongjiang Complex, NE China

NASA Astrophysics Data System (ADS)

Kabir, Md. Fazle; Takasu, Akira; Li, Weimin

2018-05-01

In the Gotsu area of the c. 200 Ma high-P/T Suo metamorphic belt in the Inner Zone of southwest Japan, blueschists occur as lenses or layers within pelitic schists. Prograde, peak, and retrograde stages are distinguished in the blueschists, and the prograde and the peak metamorphic conditions are determined using pseudosection modelling in the NCKFMASHO system. The prograde metamorphic stage is defined by inclusions in porphyroblastic epidote and glaucophane, such as phengite, chlorite, albite, epidote and glaucophane/winchite, and the estimated metamorphic conditions are <325 °C and < 4-5 kbar at the boundary between the glaucophane schist facies and the greenschist facies. The peak metamorphic stage is well-defined by the schistosity-forming minerals, i.e. epidote, glaucophanic amphibole, phengite, and chlorite, suggesting the glaucophane schist facies conditions of 475-500 °C and 14-16 kbar. Actinolite/magnesiohornblende, chlorite, and albite replacing the peak stage minerals suggest the retrograde metamorphism into the greenschist facies. The metamorphic facies series of the Suo belt is defined by pumpellyite-actinolite facies to epidote-blueschist facies, and it has a relatively lower-P/T compared with the c. 300 Ma Renge belt in the Inner Zone of southwest Japan, which is defined by a sequence of lawsonite-blueschist facies to glaucophane-eclogite facies. The P- {M}_{{H}_2O} pseudosection and water isopleth show that the rocks were dehydrated during the initial stage of the exhumation and remained in water-saturated conditions. Similarities of the detrital zircon and peak metamorphic ages of the blueschists from the Suo metamorphic belt in southwest Japan and the Heilongjiang Complex in northeast China suggest that both metamorphic belts were probably formed in the same Paleo-Pacific subduction system in the Late Triassic to Jurassic period.

Geochemical and Microbial Community Attributes in Relation to Hyporheic Zone Geological Facies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hou, Zhangshuan; Nelson, William C.; Stegen, James C.

The hyporheic zone (HZ) is the active ecotone between the surface stream and groundwater, where exchanges of water, nutrients, and organic matter occur in response to variations in discharge and riverbed properties. Within this region, a confluence of surface-derived organic carbon and subsurface nitrogen (in the form of nitrate) has been shown to stimulate microbial activity and transformations of carbon and nitrogen species. For example, production of gases such as CO 2, N 2 and N 2O indicate hyporheic zones might have a significant effect on energy and nutrient flows between the atmosphere and the subsurface. Managed and seasonal rivermore » stage changes and geomorphology-controlled sediment texture drive water flow within the HZ of the Columbia River. To examine the relationship between sediment texture, biogeochemistry, and biological activity in the HZ, the grain size distributions for sediment samples taken across 320 m of shoreline were characterized to define geological facies, and the relationships among physical properties of the facies, physicochemical attributes of the local environment, and the structure and activity of associated microbial communities were examined. Mud and sand content and the presence of carbon and nitrogen oxidizers were found to explain the variability in many biogeochemical attributes. Microbial community analysis revealed a high relative abundance of putative ammonia-oxidizing Thaumarchaeota and nitrite-oxidizing Nitrospirae, together comprising ~20% of the total community across all samples, but scant ammonia-oxidizing Bacteria. Network analysis of operational taxonomic units and the measured geophysical, chemical, and functional parameters showed negative relationships between abundance-based modules of organisms and sand and mud contents, and positive relationships with total organic carbon. The relationships identified in this work indicate grain size distribution is a good predictor of biogeochemical properties, and that subsets of the overall microbial community respond to different sediment texture. Some member populations of these sub-communities appear to respond directly to environmental conditions, while others may be dependent on the function of the first group. For example, nitrification is a strong primary response to the observed conditions, and this activity appears to support a larger heterotrophic community. Relationships between facies and hydrobiogeochemical properties enables facies-based conditional simulation/mapping of these properties to inform multiscale modeling of hyporheic exchange and biogeochemical processes.« less

Geochemical and Microbial Community Attributes in Relation to Hyporheic Zone Geological Facies

DOE PAGES

Hou, Zhangshuan; Nelson, William C.; Stegen, James C.; ...

2017-09-20

The hyporheic zone (HZ) is the active ecotone between the surface stream and groundwater, where exchanges of water, nutrients, and organic matter occur in response to variations in discharge and riverbed properties. Within this region, a confluence of surface-derived organic carbon and subsurface nitrogen (in the form of nitrate) has been shown to stimulate microbial activity and transformations of carbon and nitrogen species. For example, production of gases such as CO 2, N 2 and N 2O indicate hyporheic zones might have a significant effect on energy and nutrient flows between the atmosphere and the subsurface. Managed and seasonal rivermore » stage changes and geomorphology-controlled sediment texture drive water flow within the HZ of the Columbia River. To examine the relationship between sediment texture, biogeochemistry, and biological activity in the HZ, the grain size distributions for sediment samples taken across 320 m of shoreline were characterized to define geological facies, and the relationships among physical properties of the facies, physicochemical attributes of the local environment, and the structure and activity of associated microbial communities were examined. Mud and sand content and the presence of carbon and nitrogen oxidizers were found to explain the variability in many biogeochemical attributes. Microbial community analysis revealed a high relative abundance of putative ammonia-oxidizing Thaumarchaeota and nitrite-oxidizing Nitrospirae, together comprising ~20% of the total community across all samples, but scant ammonia-oxidizing Bacteria. Network analysis of operational taxonomic units and the measured geophysical, chemical, and functional parameters showed negative relationships between abundance-based modules of organisms and sand and mud contents, and positive relationships with total organic carbon. The relationships identified in this work indicate grain size distribution is a good predictor of biogeochemical properties, and that subsets of the overall microbial community respond to different sediment texture. Some member populations of these sub-communities appear to respond directly to environmental conditions, while others may be dependent on the function of the first group. For example, nitrification is a strong primary response to the observed conditions, and this activity appears to support a larger heterotrophic community. Relationships between facies and hydrobiogeochemical properties enables facies-based conditional simulation/mapping of these properties to inform multiscale modeling of hyporheic exchange and biogeochemical processes.« less

Establishing the Relationship between Fracture-Related Dolomite and Primary Rock Fabric on the Distribution of Reservoirs in the Michigan Basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. Michael Grammer

2006-09-30

This topical report covers the year 2 of the subject 3-year grant, evaluating the relationship between fracture-related dolomite and dolomite constrained by primary rock fabric in the 3 most prolific reservoir intervals in the Michigan Basin (Ordovician Trenton-Black River Formations; Silurian Niagara Group; and the Devonian Dundee Formation). The characterization of select dolomite reservoirs has been the major focus of our efforts in Phase II/Year 2. Fields have been prioritized based upon the availability of rock data for interpretation of depositional environments, fracture density and distribution as well as thin section, geochemical, and petrophysical analyses. Structural mapping and log analysismore » in the Dundee (Devonian) and Trenton/Black River (Ordovician) suggest a close spatial relationship among gross dolomite distribution and regional-scale, wrench fault related NW-SE and NE-SW structural trends. A high temperature origin for much of the dolomite in the 3 studied intervals (based upon initial fluid inclusion homogenization temperatures and stable isotopic analyses,) coupled with persistent association of this dolomite in reservoirs coincident with wrench fault-related features, is strong evidence for these reservoirs being influenced by hydrothermal dolomitization. For the Niagaran (Silurian), a comprehensive high resolution sequence stratigraphic framework has been developed for a pinnacle reef in the northern reef trend where we had 100% core coverage throughout the reef section. Major findings to date are that facies types, when analyzed at a detailed level, have direct links to reservoir porosity and permeability in these dolomites. This pattern is consistent with our original hypothesis of primary facies control on dolomitization and resulting reservoir quality at some level. The identification of distinct and predictable vertical stacking patterns within a hierarchical sequence and cycle framework provides a high degree of confidence at this point that results will be exportable throughout the basin. Ten petrophysically significant facies have been described in the northern reef trend, providing significantly more resolution than the standard 4-6 that are used most often in the basin (e.g. Gill, 1977). Initial petrophysical characterization (sonic velocity analysis under confining pressures) shows a clear pattern that is dependent upon facies and resulting pore architecture. Primary facies is a key factor in the ultimate diagenetic modification of the rock and the resulting pore architecture. Facies with good porosity and permeability clearly show relatively slow velocity values as would be expected, and low porosity and permeability samples exhibit fast sonic velocity values, again as expected. What is significant is that some facies that have high porosity values, either measured directly or from wireline logs, also have very fast sonic velocity values. This is due to these facies having a pore architecture characterized by more localized pores (vugs, molds or fractures) that are not in communication.« less

Recent hydrological variability and extreme precipitation events in Moroccan Middle-Atlas mountains: micro-scale analyses of lacustrine sediments

NASA Astrophysics Data System (ADS)

Jouve, Guillaume; Vidal, Laurence; Adallal, Rachid; Bard, Edouard; Benkaddour, Abdel; Chapron, Emmanuel; Courp, Thierry; Dezileau, Laurent; Hébert, Bertil; Rhoujjati, Ali; Simonneau, Anaelle; Sonzogni, Corinne; Sylvestre, Florence; Tachikawa, Kazuyo; Viry, Elisabeth

2016-04-01

Since the 1990s, the Mediterranean basin undergoes an increase in precipitation events and extreme droughts likely to intensify in the XXI century, and whose origin is attributable to human activities since 1850 (IPCC, 2013). Regional climate models indicate a strengthening of flood episodes at the end of the XXI century in Morocco (Tramblay et al, 2012). To understand recent hydrological and paleohydrological variability in North Africa, our study focuses on the macro- and micro-scale analysis of sedimentary sequences from Lake Azigza (Moroccan Middle Atlas Mountains) covering the last few centuries. This lake is relevant since local site monitoring revealed that lake water table levels were correlated with precipitation regime (Adallal R., PhD Thesis in progress). The aim of our study is to distinguish sedimentary facies characteristic of low and high lake levels, in order to reconstruct past dry and wet periods during the last two hundred years. Here, we present results from sedimentological (lithology, grain size, microstructures under thin sections), geochemical (XRF) and physical (radiography) analyses on short sedimentary cores (64 cm long) taken into the deep basin of Lake Azigza (30 meters water depth). Cores have been dated (radionuclides 210Pb, 137Cs, and 14C dating). Two main facies were distinguished: one organic-rich facies composed of wood fragments, several reworked layers and characterized by Mn peaks; and a second facies composed of terrigenous clastic sediments, without wood nor reworked layers, and characterized by Fe, Ti, Si and K peaks. The first facies is interpreted as a high lake level stand. Indeed, the highest paleoshoreline is close to the vegetation, and steeper banks can increase the current velocity, allowing the transport of wood fragments in case of extreme precipitation events. Mn peaks are interpreted as Mn oxides precipitations under well-oxygenated deep waters after runoff events. The second facies is linked to periods of increased detrital input by incising sediments during low lake levels. This interpretation is supported by chronological jumps in this facies (incoherent old 14C ages). Finally, the presence of numerous anhydrous calcium sulfates in the recent low lake level facies supports the observation of a decreasing lake level for the last decades (Flower et al., 1989; Adallal R., PhD Thesis in progress). Our study demonstrates that several lake level changes occurred during the past two hundred years, and highlights the unprecedented lake level drop since the 1980s. Bibliography Flower, R.J., Stevenson, A.C., Dearing, J.A., Foster, I.D., Airey, A., Rippey, B.,Wilson, J.P.F. & Appleby, P.G. (1989). Catchment disturbance inferred from paleolimnological studies of three contrasted sub-humid environments in Morocco. J Paleolimnol 1: 293-322. IPCC, AR 5. Climate Change (2013). The physical Science Report. Tramblay, Y., Badi, W., Driouech, F., El Adlouni, S., Neppel, L. and Servat, E. 2012. Climate change impacts on extreme precipitation in Morocco. Global and Planetary Change 82-83: 104-114.

Critical dynamics of gravito-convective mixing in geological carbon sequestration

DOE PAGES

Soltanian, Mohamad Reza; Amooie, Mohammad Amin; Dai, Zhenxue; ...

2016-11-03

When CO 2 is injected in saline aquifers, dissolution causes a local increase in brine density that can cause Rayleigh-Taylor-type gravitational instabilities. Depending on the Rayleigh number, density-driven flow may mix dissolved CO 2 throughout the aquifer at fast advective time-scales through convective mixing. Heterogeneity can impact density-driven flow to different degrees. Zones with low effective vertical permeability may suppress fingering and reduce vertical spreading, while potentially increasing transverse mixing. In more complex heterogeneity, arising from the spatial organization of sedimentary facies, finger propagation is reduced in low permeability facies, but may be enhanced through more permeable facies. The connectivitymore » of facies is critical in determining the large-scale transport of CO 2-rich brine. We perform high-resolution finite element simulations of advection-diffusion transport of CO 2 with a focus on facies-based bimodal heterogeneity. Permeability fields are generated by a Markov Chain approach, which represent facies architecture by commonly observed characteristics such as volume fractions. CO 2 dissolution and phase behavior are modeled with the cubic-plus-association equation-of-state. Our results show that the organization of high-permeability facies and their connectivity control the dynamics of gravitationally unstable flow. Lastly, we discover new flow regimes in both homogeneous and heterogeneous media and present quantitative scaling relations for their temporal evolution.« less

Studies in Historical Replication in Psychology VII: The Relative Utility of "Ancestor Analysis" from Scientific and Educational Vantages

ERIC Educational Resources Information Center

Ranney, Michael Andrew

2008-01-01

This article discusses, from various vantages, Ryan Tweney's (this issue) pedagogical technique of employing historical replications of psychological experiments with graduate students in psychology. A "prima facie" perspective suggests great promise for this sort of academic "ancestor analysis," particularly given the enthusiasm and skill…

A Longitudinal Analysis of Factors Related to Survival in Old Age.

ERIC Educational Resources Information Center

Shahtahmasebi, Said; And Others

1992-01-01

Used data from a longitudinal study of elderly which began in 1979 with 534 individuals in rural North Wales to study relationship between social circumstances and longevity. Multivariate analysis demonstrated there is no prima facie evidence that survival is affected by social networks or quality of life factors. However, socioeconomic factors…

17 CFR 270.3a-1 - Certain prima facie investment companies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Certain prima facie investment companies. 270.3a-1 Section 270.3a-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) RULES AND REGULATIONS, INVESTMENT COMPANY ACT OF 1940 § 270.3a-1 Certain prima facie investment...

Stratigraphic evolution of the Late Jurassic Hanifa Formation along the Tuwaiq Escarpment, Saudi Arabia: Evidence for a carbonate ramp system

NASA Astrophysics Data System (ADS)

Fallatah, Mohammed I.; Kerans, Charles

2018-01-01

A sequence stratigraphic framework of the Late Jurassic (Oxfordian) Hanifa Formation at its exposure in Central Arabia is presented for the first time. This study offers the first high-resolution stratigraphic framework of the Hanifa along the Tuwaiq Escarpment by measuring 15 sections ( 770 m total thickness) over an oblique-to-dip distance of 260 km and collecting 295 samples for petrographic analysis. On the basis of these data, the Hanifa Formation can be subdivided into eight facies; 1) tabular cross-bedded quartz-peloidal-skeletal grainstone, 2) cross-bedded skeletal-peloidal grainstone, 3) bioturbated foraminiferal wackestone/mud-dominated packstone, 4) oncolitic rudstone, 5) stromatoporoid-coral biostrome/bioherm, 6) peloidal/composite-grain grain-dominated packstone/grainstone, 7) bioturbated spiculitic wackestone/mud-dominated packstone, and 8) thinly-bedded argillaceous mudstone/wackestone. The vertical and lateral distributions of these facies along the exposure define their sequence setting using the principals of sequence stratigraphy. By recognizing erosional surfaces, facies offset, and changes in facies proportions, five third-order sequences, with an average duration of 1.1 Myr, are interpreted for the Hanifa Formation. The correlation of the sequences across the study area shows that only four sequences are preserved in the north where shallow-water deposits are well-developed. Facies trends within these sequences are further illustrated in depositional models representing the highstand systems tracts (HST) and the transgressive systems tracts (TST) of the Hanifa Formation. These proposed models represent depositional settings of a carbonate ramp with normal open-marine conditions. The HST depositional model is characterized by a high-energy shoreline and depicts the presence of an offshore, structurally controlled skeletal-peloidal shoal body described here for the first time at the Hanifa exposure in the Hozwa area. This work provides a predictive framework and outcrop analog for applications in hydrocarbon exploration and development. Furthermore, a basinal setting predicted to the south of the study area is a potential site for unconventional plays.

Rock formation characterization for carbon dioxide geosequestration: 3D seismic amplitude and coherency anomalies, and seismic petrophysical facies classification, Wellington and Anson-Bates Fields, Kansas, USA

NASA Astrophysics Data System (ADS)

Ohl, Derek; Raef, Abdelmoneam

2014-04-01

Higher resolution rock formation characterization is of paramount priority, amid growing interest in injecting carbon dioxide, CO2, into subsurface rock formations of depeleting/depleted hydrocarbon reservoirs or saline aquifers in order to reduce emissions of greenhouse gases. In this paper, we present a case study for a Mississippian carbonate characterization integrating post-stack seismic attributes, well log porosities, and seismic petrophysical facies classification. We evaluated changes in petrophysical lithofacies and reveal structural facies-controls in the study area. Three cross-plot clusters in a plot of well log porosity and acoustic impedance corroborated a Neural Network petrophysical facies classification, which was based on training and validation utilizing three petrophysically-different wells and three volume seismic attributes, extracted from a time window including the wavelet of the reservoir-top reflection. Reworked lithofacies along small-throw faults has been revealed based on comparing coherency and seismic petrophysical facies. The main objective of this study is to put an emphasis on reservoir characterization that is both optimized for and subsequently benefiting from pilot tertiary CO2 carbon geosequestration in a depleting reservoir and also in the deeper saline aquifer of the Arbuckle Group, south central Kansas. The 3D seismic coherency attribute, we calculated from a window embracing the Mississippian top reflection event, indicated anomalous features that can be interpreted as a change in lithofacies or faulting effect. An Artificial Neural Network (ANN) lithofacies modeling has been used to better understand these subtle features, and also provide petrophysical classes, which will benefit flow-simulation modeling and/or time-lapse seismic monitoring feasibility analysis. This paper emphasizes the need of paying greater attention to small-scale features when embarking upon characterization of a reservoir or saline-aquifer for CO2 based carbon geosequestration.

Estimates of chemical compaction and maximum burial depth from bedding parallel stylolites

NASA Astrophysics Data System (ADS)

Gasparrini, Marta; Beaudoin, Nicolas; Lacombe, Olivier; David, Marie-Eleonore; Youssef, Souhail; Koehn, Daniel

2017-04-01

Chemical compaction is a diagenetic process affecting sedimentary series during burial that develops rough dissolution surfaces named Bedding Parallel Stylolites (BPS). BPS are related to the dissolution of important rock volumes and can lead to porosity reduction around them due to post-dissolution cementation. Our understanding of the effect of chemical compaction on rock volume and porosity evolution during basin burial is however too tight yet to be fully taken into account in basin models and thermal or fluid-flow simulations. This contribution presents a novel and multidisciplinary approach to quantify chemical compaction and to estimate maximum paleodepth of burial, applied to the Dogger carbonate reservoirs from the Paris Basin sub-surface. This succession experienced a relatively simple burial history (nearly continuous burial from Upper Jurassic to Upper Cretaceous, followed by a main uplift phase), and mainly underwent normal overburden (inducing development of BPS), escaping major tectonic stress episodes. We considered one core from the depocentre and one from the eastern margin of the basin in the same stratigraphic interval (Bathonian Sup. - Callovian Inf.; restricted lagoonal setting), and analysed the macro- and micro-facies to distinguish five main depositional environments. Type and abundance of BPS were continuously recorded along the logs and treated statistically to obtain preliminary rules relying the occurrence of the BPS as a function of the contrasting facies and burial histories. The treatment of high resolution 2D images allowed the identification and separation of the BPS to evaluate total stylolitization density and insoluble thickness as an indirect measure of the dissolved volume, with respect to the morphology of the BPS considered. Based on the morphology of the BPS roughness, we used roughness signal analysis method to reconstruct the vertical paleo-stress (paleo-depth) recorded by the BPS during chemical compaction. The comparison between amount of compaction and dissolved volume as a function of the macro- and micro-facies, as well as estimates of maximum paleodepth of burial, deepen our knowledge of the factors controlling BPS development, the total thickness of carbonate dissolved and the occurrence of induced cementation in sedimentary basins.

Slope-apron deposition in an ordovician arc-related setting: The Vuelta de Las Tolas Member (Suri Formation), Famatina Basin, northwest Argentina

USGS Publications Warehouse

Mangano, M.G.; Buatois, L.A.

1997-01-01

The Ordovician Suri Formation is part of the infill of the Famatina Basin of northwest Argentina, which formed in an active setting along the western margin of early Paleozoic Gondwana. The lower part of this formation, the Vuelta de Las Tolas Member, records sedimentation on a slope apron formed in an intra-arc basin situated on a flooded continental arc platform. The coincidence of a thick Arenig-Llanvirn sedimentary succession and volcanic-plutonic arc rocks suggests an extensional or transtensional arc setting, and is consistent with evidence of an extensional regime within the volcanic arc in the northern Puna region. The studied stratigraphic sections consist of volcanic rocks and six sedimentary facies. The facies can be clustered into four facies associations. Association 1, composed of facies A (laminated siltstones and mudstones) and B (massive mudstones and siltstones), is interpreted to have accumulated from silty-muddy high-and low-density turbidity currents and highly fluid, silty debris flows, with subsequent reworking by bottom currents, and to a lesser extent, hemipelagic suspension in an open-slope setting. Facies association 2 is dominated by facies C (current-rippled siltstones) strata. These deposits are interpreted to record overbank sedimentation from fine-grained turbidity currents. Facies E (matrix-supported volcanic breccias) interbedded with andesitic lava units comprises facies association 3. Deposition was contemporaneous with subaqueous volcanic activity, and accumulated from cohesive debris flows in a coarse-grained wedge at the base of slope. Facies association 4 is typified by facies D (vitric fine-grained sandstones and siltstones) and F (channelized and graded volcanic conglomerates and breccias) deposits. These strata commonly display thinning-and fining-upward trends, indicating sedimentation from highly-concentrated volcaniclastic turbidity currents in a channelized system. The general characteristics of these deposits of fresh pyroclastic detritus suggest that their accumulation was contemporaneous with, or post-dated shallow-water or subaereal explosive volcanism. The Vuelta de Las Tolas Member tends to show an overall random facies patterns reflecting the strong influence of non-cyclical episodic processes related to arc volcanism and slope sedimentation. The scarcity of resident ichnofaunas and the presence of thick packages of uniform mudstones suggest deposition under oxygen-depleted conditions in a topographically confined, ponded sub-basin. Interbasinal correlations favor comparison with Middle Arenig slope-apron successions formed in the northern Puna Basin and suggest a southward prolongation of the Arenig volcanic arc.

Submarine fan facies of Upper Cretaceous Strata, Southern San Rafael Mountains, Santa Barbara County, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toyne, C.D.

1986-04-01

A 2900-m thick Campanian-Maestrichtian(.) turbidite sequence in Upper Mono Creek Canyon is interpreted to be a progradational submarine fan complex comprised of outer fan, middle fan, inner fan, and slope facies. The basal 600 m of the section consists of thinly bedded, laterally continuous fine sandstones, siltstones, and mudstones (mainly Mutti and Ricci Lucci facies D), interpreted to be outer fan interlobe and lobe-fringe deposits. These are punctuated by infrequent medium to very thickly bedded, flat-based, fine to coarse sandstones (facies C and B), which commonly coarsen and thicken upward, and are interpreted to be depositional lobes. Overlying these depositsmore » are approximately 1400 m of middle fan deposits composed of frequent lenticular, commonly channelized and amalgamated, thickly bedded, fine to very coarse sandstones (facies C and B) organized in fining- and thinning-upward sequences, interpreted to be braided-channel deposits. These alternate with less common nonchannelized coarsening- and thickening-upward sequences suggestive of lobe-apical cycles. These multistory sand deposits are nested within thick intervals of fine sandstones, siltstones, and mudstones (facies C and D), interpreted to be levee, crevasse-splay, and interchannel deposits. Interfingered with and overlying these deposits are approximately 500 m of fining- and thinning-upward or noncyclic, erosionally based, commonly amalgamated, very thickly bedded, medium to very coarse sandstones, pebbly sandstones, and conglomerates (facies A and B), interpreted to be inner fan deposits. Intercalated within this facies, infrequent, laterally discontinuous, thin to thickly bedded, fine to coarse sandstones, siltstones, and mudstones exist, interpreted to be interchannel, levee, and possibly channel-fill deposits.« less

Piedramuelle Limestone in the building heritage of Oviedo, Spain, and adjacent towns.

NASA Astrophysics Data System (ADS)

Cardenes Van den Eynde, Victor; Mateos, Felix Javier; Valdeon, Luis; Rojo, Araceli

2017-04-01

The Piedramuelle limestone has a very important representation in the building heritage of Oviedo, historical capital of Asturias (Spain) and surrounding towns. This argillaceous limestone has been quarried since the High Middle Ages until the beginning of the XX century. The main mineralogical components are carbonates (mainly calcite and sometimes ankerite, 70-90%), quartz (5-15%), terrigenous minerals (6-15%) and iron oxides (<5%). Two different facies, with different constructive uses, can be clearly distinguished depending on the grain size: fine-grained facies and coarse-grained facies. The fine-grained facies has color ranging from red to yellow, slightly higher content in carbonates, higher terrigenous components and a micro crystalline texture. The coarse-grained facies is mainly yellow, with detrital clastic texture. The open porosity is higher for the coarse-grained facies (16-20%), while for the fine-grained facies it ranges between 5 and 15%. The fine-grained facies is more vulnerable to weathering than the coarse-grained one, and it is used in the building heritage mainly for ornamental details, while the coarse-grained one is found in the bigger blocks and ashlars of the buildings. Some of the buildings constructed with Piedramuelle limestone are the Cathedral, the Old University and the Palaces from the XVII and XVIII centuries. The ambiance and historical architecture of Oviedo and adjacent towns is closely linked with the textures and colors of this stone. Nowadays, the Piedramuelle limestone is not exploited anymore, being the quarries exhausted. This represents an issue from a conservation point of view, since there is not a suitable stone for replacement. In order to preserve and maintain the building heritage of these towns, it is very important to prospect and protect the remaining outcrops still able to supply this characteristic stone.

Age and duration of eclogite-facies metamorphism, North Qaidam HP/UHP terrane, Western China

USGS Publications Warehouse

Mattinson, C.G.; Wooden, J.L.; Liou, J.G.; Bird, D.K.; Wu, C.L.

2006-01-01

Amphibolite-facies para-and orthogneisses near Dulan, at the southeast end of the North Qaidam terrane, enclose minor eclogite and peridotite which record ultra-high pressure (UHP) metamorphism associated with the Early Paleozoic continental collision of the Qilian and Qaidam microplates. Field relations and coesite inclusions in zircons from paragneiss suggest that felsic, mafic, and ultramafic rocks all experienced UHP metamorphism and a common amphibolite-facies retrogression. SHRIMP-RG U-Pb and REE analyses of zircons from four eclogites yield weighted mean ages of 449 to 422 Ma, and REE patterns (flat HREE, no Eu anomaly) and inclusions of garnet, omphacite, and rutile indicate these ages record eclogite-facies metamorphism. The coherent field relations of these samples, and the similar range of individual ages in each sample suggests that the ???25 m.y. age range reflects the duration of eclogite-facies conditions in the studied samples. Analyses from zircon cores in one sample yield scattered 433 to 474 Ma ages, reflecting partial overlap on rims, and constrain the minimum age of eclogite protolith crystallization. Inclusions of Th + REE-rich epidote, and zircon REE patterns are consistent with prograde metamorphic growth. In the Lu??liang Shan, approximately 350 km northwest in the North Qaidam terrane, ages interpreted to record eclogite-facies metamorphism of eclogite and garnet peridotite are as old as 495 Ma and as young as 414 Ma, which suggests that processes responsible for extended high-pressure residence are not restricted to the Dulan region. Evidence of prolonged eclogite-facies metamorphism in HP/UHP localities in the Northeast Greenland eclogite province, the Western Gneiss Region of Norway, and the western Alps suggests that long eclogite-facies residence may be globally significant in continental subduction/collision zones.

Slump dominated upper slope reservoir facies, Intra Qua Iboe (Pliocene), Edop Field, offshore Nigeria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shanmugam, G.; Hermance, W.E.; Olaifa, J.O.

An integration of sedimentologic and 3D seismic data provides a basis for unraveling complex depositional processes and sand distribution of the Intra Qua Iboe (IQI) reservoir (Pliocene), Edop Field, offshore Nigeria. Nearly 3,000 feet of conventional core was examined in interpreting slump/slide/debris flow, bottom current, turbidity current, pelagic/hemipelagic, wave and tide dominated facies. The IQI was deposited on an upper slope in close proximity to the shelf edge. Through time, as the shelf edge migrated seaward, deposition began with a turbidite channel dominated slope system (IQI 1 and 2) and progressed through a slump/debris flow dominated slope system (IQI 3,more » the principal reservoir) to a tide and wave dominated, collapsed shelf-edge deltaic system (IQI 4). Using seismic time slices and corresponding depositional facies in the core, a sandy {open_quotes}fairway{open_quotes} has been delineated in the IQI 3. Because of differences in stacking patterns of sandy and muddy slump intervals, seismic facies show: (1) both sheet-like and mounded external forms (geometries), and (2) parallel/continuous as well as chaotic/hummocky internal reflections. In wireline logs, slump facies exhibits blocky, coarsening-up, fining-up, and serrated motifs. In the absence of conventional core, slump facies may be misinterpreted and even miscorrelated because seismic facies and log motifs of slumps and debris flows tend to mimic properties of turbidite fan deposits. The slump dominated reservoir facies is composed of unconsolidated fine-grained sand. Thickness of individual units varies from 1 to 34 feet, but amalgamated intervals reach a thickness of up to 70 feet and apparently form connected sand bodies. Porosity commonly ranges from 20 to 35%. Horizontal permeability commonly ranges from 1,000 to 3,000 md.« less

Facies Distribution and Petrophysical Properties of Shoreface-Offshore Transition Environment in Sandakan Formation, NE Sabah Basin

NASA Astrophysics Data System (ADS)

Majid, M. Firdaus A.; Suhaili Ismail, M.; Rahman, A. Hadi A.; Azfar Mohamed, M.

2017-10-01

Newly exposed outcrop of Miocene shallow marine sandstone in Sandakan Formation, allows characterization of the facies distribution and petrophysical properties of shoreface to offshore transition environment. Six facies are defined: (1) Poorly bioturbated Hummocky Cross Stratified (HCS) sandstone (F1), (2) Moderately bioturbated HCS sandstone (F2), (3) Well bioturbated HCS sandstone (F3), (4) Poorly bioturbated Swaley Cross Stratified (SCS) sandstone (F4), (5) Interbedded HCS sandstone with sand-silt mudstone, (6) Heterolithic mudstone. The sedimentary successions were deposited in upper to lower shoreface, and offshore transition environment. Facies F3, F4 and F5 shows good reservoir quality with good porosity and fair permeability values from 20% to 21% and 14 mD to 33 mD respectively. While Facies F1 exhibits poor reservoir quality with low permeability values 3.13 mD.

Brackish to hypersaline lake dolostones of the Mississippian

NASA Astrophysics Data System (ADS)

Bennett, Carys; Kearsey, Timothy; Davies, Sarah; Millward, David; Marshall, John

2016-04-01

Flat-lying ferroan dolomite beds are common in the Mississippian and occur along the southern margin of Laurassia, from Kentucky USA to Poland. These rocks are important as they record shallow marine to coastal plain environments that may have acted as a pathway or refugia for animals that were radiating into freshwaters such as tetrapods, fish, molluscs and arthropods. This study is a contribution to the TW:eed Project (Tetrapod World: early evolution and diversification), that examines the rebuilding of Carboniferous ecosystems following a mass extinction at the end of the Devonian. The project focuses on the Tournaisian Ballagan Formation of Scotland, which contains rare fish and tetrapod fossils. The formation is characterised by an overbank facies association of siltstone, sandstone and palaeosols, interbedded with dolostone and evaporite units, and cut by fluvial sandstone facies associations of fining-upwards conglomerate lags, cross-bedded sandstone and rippled siltstone. Two sites are used as a case study to describe the sedimentological, faunal and ichnofaunal diversity of these dolostones. More than 270 dolostone beds are recorded in each of the 500 metre depth Norham Core (near Berwick-upon-Tweed) and from a 520 metre thick field section at Burnmouth. The beds are laterally extensive, over ˜1 km, although individual units do not appear to correlate between the core and the field site. In the Norham Core dolostones comprise up to 14% of the succession. 17% of the beds contain marginal marine fossils: Spirorbis, rare orthocones, brachiopods and putative marine sharks. More common fauna include ostracods, bivalves, plants, eurypterids, gastropods and sarcopterygian fish, which are interpreted as brackish to freshwater tolerant. Bioturbation is fairly common with Serpula colonies within dolostone beds and Chondrites burrowing down from the base of dolostone beds. Some rare units in the field section have a bulbous bed surface and preserve tree root traces, and 9% of all dolostone beds in the Norham Core are pedogenically altered. The isotopic composition of dolomite beds is δ18O -3.6‰ to -1.7‰ and δ13C -2.6‰ to 1.6‰ which is consistent with a brackish as opposed to marine origin. The dolostones are categorised by their sedimentary composition: Facies 1: Cemented siltstone and sandstone; Facies 2: Homogeneous micrite to micro-crystaline dolomite, within a clay matrix; Facies 3: Bedded dolomite and siltstone; Facies 4: Mixed calcite and dolomite; Facies 5: Dolomite with gypsum and anhydrite. Formation processes are diverse, and include diagenetic cementation (Facies 1), deposition in saline (brackish) lakes (Facies 2), deposition in saline lakes with clastic sediment input (Facies 3), lagoonal to shallow-marine carbonate deposition (Facies 4), and hypersaline lake to sabkha environments (Facies 5). 60% of the beds are facies 2 or 3 and their sedimentology, fauna, ichnofauna and isotopic composition indicate a brackish-water origin. Other Mississippian dolostones from around the world also contain a fairly restricted fauna and have been interpreted as brackish water deposits. The mechanism of dolomite formation under these conditions is discussed. These dolostones provided extensive coastal lakes that may have been an important habitat for tetrapods and other transitional groups during the Mississippian.

Depositional Environments of Late Danian Plant Localities: Chubut Provice, Patagonia, Argentina

NASA Astrophysics Data System (ADS)

Comer, E.; Slingerland, R. L.; Wilf, P.

2010-12-01

Diverse, well-preserved macroflora are observed within Cretaceous and Paleocene sediments of Chubut Province, Patagonia, Argentina. These macroflora are the most well preserved early Paleocene flora from Gondwana and add new insight into the diversity and environments of that epoch. Two major sites of fossil preservation, Palacio de los Loros and Parque Provincial Ormachea, sit near the top of the Late Danian (65.5-61.7 Ma) Salamanca Formation. Understanding the depositional history of the Salamanca is important in characterizing paleoenvironments in which these flora lived and relating these Patagonian macroflora to concurrent Paleocene flora within the Gondwanan supercontinent. During a two week field season, twenty stratigraphic sections were measured along the outcrop belt at Palacio de los Loros and Ormachea Park as well as two minor sites; Las Flores, and Rancho Grande. Photo mosaics, laser ranger data, and stratigraphic columns were merged with elevated geologic maps and imported into Fledermaus to generate a 3-D visualization of facies relationships. Rock samples were also collected and will be thin sectioned and analyzed for petrography and grain size. The Salamanca Fm. consists of 7 facies, listed here in stratigraphically ascending order: 1)Transgressive sands, 2)Wispy-bedded claystone, 3)Banco Verde, 4)White Cross bedded sandstone, 5)Accretion set siltstone, 6)Transitional silty claystone and 7)Banco Negro. Based on these facies, the Salamanca Fm. is interpreted as a marine-shelf to brackish, tide-dominated, estuarine deposit. The base of the Salamanca Fm. rests on an unconformity representing a marine flooding surface and lower sections of the Salamanca, facies 1 and 2, contain abundant glauconite and fossils indicative of a marine shelf environment. These facies give way upwards to bi-directional trough cross bedded sandstones interspersed with flaser bedded sandy siltstones (facies 3 and 4) indicating a less marine estuary with strong flow regimes and bi-directional currents. Unique features within these two facies such as microdeltas and plane parallel lamination indicate complex micro-environments and flow patterns. Fossil plant remains lie within lateral accretion sets or siltstone facies both above and below the trough cross-bedded sandstone facies. At the top of the Salamanca we reach facies 6 and 7 which transition from sandstone to black mudstone of the Banco Negro. Mammal fossils found in the Banco Negro identify it as a non-marine continental facies. The Late Paleocene Rio Chico formation that overlies the Banco Negro is identified as a continental fluvial formation indicating that facies 6 represents emptying of the estuary and a longstanding regional transition from a marine to a continental environment. To understand the origin of the tidal flows, a paleogeographic model of the Late Danian Patagonian shelf was constructed from facies distributions within the Salamanca Fm. A 2D hydrodynamic model driven by predicted tides in the paleo-Atlantic produces a tidal range of approximately 2m and strong ebb and flood tides throughout the central estuary. These observations are consistent with our interpretation of a meso-tidal estuarine environment as the paleo-flora accumulation site.

Composite biostratigraphy and microfacies analysis of the Upper Jurassic - Lower Cretaceous carbonate platform to slope successions in Sivrihisar (Eskişehir) region (NW Turkey, Pontides): Remarks on the palaeogeographic evolution of the Western Sakarya Zo

NASA Astrophysics Data System (ADS)

Atasoy, Serdar G.; Altıner, Demir; Okay, Aral I.

2017-04-01

Two stratigraphical sections were measured along the Upper Jurassic - Lower Cretaceous carbonate successions exposed in a tectonic klippe of the Sakarya Zone (Pontides), north of Sivrihisar. According to the biozonation and microfacies types, two coeval but dissimiliar rock successions, separated by a thrust fault, have been detected. These successions belong to different depositional belts of the Edremit-Bursa-Bilecik Carbonate Platform (EBBCP), western Sakarya Zone. The lower succession displays a slope to basin facies and consists of the Kimmeridgian - Berriasian Yosunlukbayırı Formation and the overlying Valanginian Soǧukçam Limestone. Within these deposits the following biozones were defined: Globuligerina oxfordiana - Mohlerina basiliensis Zone (Kimmeridgian), Saccocoma Zone (Lower Tithonian), Protopeneroplis ultragranulata Zone (Upper Tithonian), Crassicollaria (massutiana subzone) Zone (uppermost Tithonian), Calpionella (alpina, Remaniella, elliptica subzones) Zone (Lower Berriasian), Calpionellopsis (simplex, oblonga subzones) Zone (Upper Berriasian) and Calpionellites (darderi subzone) Zone (Lower Valanginian). This succession is overthrusted from north to south by another distinct succession characterized by the shallow marine carbonate facies of the Kimmeridgian Günören Formation. Within this unit Labyrinthina mirabilis - Protopeneroplis striata (Kimmeridgian) Zone is recognized. A facies model is proposed for the Sivrihisar transect of the EBBCP for Kimmeridgian - Valanginian interval, based on the distribution of microfacies types. The toe-of-slope facies are characterized by peloidal-bioclastic packstone, mudstone-wackestone and calpionellid/ radiolarian wackestone-packstone comprising pelagic taxa (calpionellids, radiolaria, Globochaete sp., Pithonella sp., Saccocoma sp., calcareous dinocysts, aptychi, very rare planktonic foraminifera and nannoconids) and rare fossil groups transported from the carbonate platform (benthic foraminifera, microencrusters, worm tubes, bivalve, crinoid and echinoid fragments). These deposits represent the background pelagic deposition on the slope. The slope facies are mainly composed of bioclastic-peloidal/ bioclastic-intraclastic packstone, rudstone-grainstone, bioclastic-lithoclastic floatstone-rudstone and reflect generally the increase in the amount of platform derived material (benthic foraminifera, microencrusters, worm tubes, corals, sponges, bryozoa). The matrix of these coarse grained deposits also contains pelagic taxa (calpionellids, radiolaria, Saccocoma sp., Globochaete sp., Pithonella sp., aptyhci). The slope facies are sometimes intercalataed with the toe-of-slope type facies indicating quiescence periods. The shallow marine carbonate platform deposits are characterized by peloidal-intraclastic poorly washed grainstone with bioclasts, bioclastic mudstone-wackestone, intraclastic packstone-rudstone and contain several shallow marine fossils (benthic foraminifera, encrustres and rare echnoid, bivalve and coral fragments) without any pelagic taxa. These carbonates are interpreted as back-reef platform deposits that should not be far away from the platform margin due to the co-occurence of Protopeneroplis striata and Mohlerina basiliensis, abundant in the shelf edge and reefal areas with the complex benthic foraminifera, Labyrinthina mirabilis common in lagoonal areas. If the position of the studied sections with respect to the EBBCP is considered, the studied basin and slope facies should represent the southern platform margin and slope environments of this carbonate platform that faced an ocean to the south during the Jurassic-Cretaceous. The slope and basinal facies overthrusted by the shallow marine deposits in a region situated to the south of the main İzmir-Ankara-Erzincan (İAE) suture suggests an important disruption and shortening of the EBBCP margin and slope deposits related to the closure of the İAE ocean.

Prediction of sedimentary facies of x-oilfield in northwest of China by geostatistical inversion

NASA Astrophysics Data System (ADS)

Lei, Zhao; Ling, Ke; Tingting, He

2017-03-01

In the early stage of oilfield development, there are only a few wells and well spacing can reach several kilometers. for the alluvial fans and other heterogeneous reservoirs, information from wells alone is not sufficient to derive detailed reservoir information. In this paper, the method of calculating sand thickness through geostatistics inversion is studied, and quantitative relationships between each sedimentary micro-facies are analyzed by combining with single well sedimentary facies. Further, the sedimentary facies plane distribution based on seismic inversion is obtained by combining with sedimentary model, providing the geological basis for the next exploration and deployment.

Paleoecological evaluation of Late Eocene biostratigraphic zonations of the Pacific Coast of North America

USGS Publications Warehouse

McDougall, Kristin

1980-01-01

The late Eocene zonal criteria of the west coast of North America are to a large extent controlled by paleoecology and, therefore, the correlation of coeval but environmentally different benthic foraminiferal faunas cannot be achieved before paleoecological control of the biostratigraphy is understood. The faunal trends, morphology, characteristic occurrences and estimated upper depth limits of the benthic foraminifers and associated microfossils in the Oregon and Washington study sections lead to the recognition of paleoecologic facies. The interpretation of these late Eocene facies as bathymetric and low-oxygen facies is based on analogous late Eocene and Holocene assemblages. The paleoecologic facies criteria are often identical to the stage and zonal criteria. In the California zonal schemes, the Narizian zones are identified by lower and middle bathyal faunas whereas the Refugian zones are identified by outer neritic and upper bathyal faunas. The Washington late Eocene zones are identified by middle bathyal and transported neritic faunas. Modifications of the existing zonal schemes such that time and not paleoecology is the controlling factor results in a zonation that synthesizes the existing zonal schemes, recognizes regional stratigraphic ranges of diagnostic species, and removes paleoecologically controlled species occurrences. The late Narizian encompasses a bathyal and a neritic facies. The bathyal facies is correlative with a modified Bulimina corrugata Zone of California and the Uvigerina cf. U. yazooensis Zone of Washington. The neritic late Narizian facies corresponds to a modified Bulimina schencki-Plectofrondicularia cf. P. jenkinsi Zone of Washington and a modified Amphimorphina jenkinsi Zone of California. The Refugian can also be divided into a neritic and a bathyal facies. Although the early and late subdivisions of this stage are tentative, the early Refugian is equivalent to the modified versions of the Cibicides haydoni and the Uvigerina atwilli Subzones of the Valvulineria tumeyensis Zone and the Uvigerina vicksburgensis Zone (in part) of California and the modified version of the Sigmomorphina schencki Zone of Washington. The late Refugian is equivalent to modified versions of the California Uvigerina vicksburgensis Zone (in part) and the Washington Cassidulina galvinensis Zone. The Cibicides haydoni Subzone is the neritic facies of the Refugian Stage, whereas the faunas of the Uvigerina atwilli Subzone and the Uvigerina vicksburgensis, Sigmomorphina schencki and Cassidulina galvinensis Zones represent the bathyal Refugian facies.

Facies development in the Lower Freeport coal bed, west-central Pennsylvania, U.S.A.

USGS Publications Warehouse

Pierce, B.S.; Stanton, R.W.; Eble, C.F.

1991-01-01

The Lower Freeport coal bed in west-central Pennsylvania is interpreted to have formed within a lacustrine-mire environment. Conditions of peat formation, caused by the changing chemical and physical environments, produced five coal facies and two mineral-rich parting facies within the coal bed. The coal bed facies are compositionally unique, having developed under varying conditions, and are manifested by megascopic, petrographic, palynologic and quality characteristics. The initial environment of the Lower Freeport peat resulted in a coal facies that is relatively high in ash yield and contains large amounts of lycopod miospores and moderate abundances of cryptotelinite, crypto-gelocollinite, inertinite and tree fern miospores. This initial Lower Freeport peat is interpreted to have been a topogenous body that was low lying, relatively nutrient rich (mesotrophic to eutrophic), and susceptible to ground water and to sediment influx from surface water. The next facies to form was a ubiquitous, clay-rich durain parting which is attributed to a general rise in the water table accompanied by widespread flooding. Following formation of the parting, peat accumulation resumed within an environment that inhibited clastic input. Development of doming in this facies restricted deposition of the upper shale parting to the margins of the mire and allowed low-ash peat to form in the interior of the mire. Because this environment was conducive to preservation of cellular tissue, this coal facies also contains large amounts of crypto-telinite. This facies development is interpreted to have been a transitional phase from topogenous, planar peat formation to slightly domed, oligotrophic (nutrient-poor) peat formation. As domed peat formation continued, fluctuations in the water table enabled oxidation of the peat surface and produced high inertinite concentrations toward the top of the coal bed. Tree ferns became an increasingly important peat contributor in the e upper facies, based on the palynoflora. This floral change is interpreted to have resulted from the peat surface becoming less wet or better drained, a condition that inhibited proliferation of lycopod trees. Accumulation of the peat continued until rising water levels formed a freshwater lake within which clays and silts were deposited. The development of the Lower Freeport peat from a planar mire through transitional phases toward domed peat formation may be an example of the type of peat formation of other upper Middle and Upper Pennsylvanian coal beds. ?? 1991.

Facies dimensions within carbonate reservoirs - guidelines from satellite images of modern analogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, P.M.; Kowalik, W.S.

1995-08-01

Modern analogs illustrate the distribution of carbonate facies within an overall depositional setting and can be an integral part of a subsurface geologic model in indicating the dimensions, trend, and interrelationships of facies that might be related to reservoir and non-reservoir distribution. Satellite images from several modern carbonate areas depict the geologic characteristics that can be expected in ancient shallow-water settings. Isolated carbonate platforms- the Bahamas, Caicos Platform in the British West Indies, Chinchorro Bank offshore of Yucatan, and portions of the Belize area; Ramp-style shelf-to-basin transitions - Abu Dhabi and northern Yucatan; Rimmed shelf margins - South Florida, portionsmore » of Belize, and the Great Barrier Reef of Australia; Broad, deep shelf lagoons - the Great Barrier Reef and Belize; Reef variability - South Florida, the Bahamas, Caicos, Northern Yucatan, and Abu Dhabi; Shallow lagoon/tidal flat settings - South Florida, the Bahamas, Caicos, Northern Yucatan, Shark Bay in Western Australia, Abu Dhabi; Mixed carbonate and siliciclastic depostion - South Florida, Belize, the Great Barrier Reef, Shark Bay and Abu Dhabi. The geologic framework as illustrated by these areas is important at the development scale where lateral variation of porosity and permeability, i.e. reservoir quality, is commonly tied to facies changes and facies dimensions are required as input to reservoir models. The geologic framework is essential at the exploration scale for reservoir facies prediction and stratigraphic play concepts which are related directly to depositional facies patterns.« less

The Cauaburi magmatic arc: Litho-stratigraphic review and evolution of the Imeri Domain, Rio Negro Province, Amazonian Craton

NASA Astrophysics Data System (ADS)

Carneiro, Marcia C. R.; Nascimento, Rielva S. C.; Almeida, Marcelo E.; Salazar, Carlos A.; Trindade, Ivaldo Rodrigues da; Rodrigues, Vanisse de Oliveira; Passos, Marcel S.

2017-08-01

A lithostratigraphic review of the Cauaburi Complex was carried out by means of field, tectono-metamorphic and geochemical data, which were the basis for the sub-division of the Cauaburi Complex orthogneisses into the Santa Izabel do Rio Negro, Cumati and São Jorge facies. These rocks crop out between São Gabriel da Cachoeira and Santa Izabel do Rio Negro, Amazonas, Brazil. The gneisses of the Santa Izabel do Rio Negro and Cumati facies are metaluminous and of calc-alkaline affinity; in turn, the rocks of the São Jorge facies are peraluminous and of alkaline affinity. They vary from (amphibole)-biotite granodiorites/monzogranites (Cumati and Santa Izabel do Rio Negro facies) to spessartite-bearing biotite monzogranites (São Jorge facies). The Cauaburi Complex geochemical signature is compatible with that of granites generated in collisional settings (magmatic arc?) and its evolution is related to three distinct tectono-metamorphic events: D1, causing foliation S1, which developed during the Cauaburi Complex syn-tectonic emplacement in the Cauaburi Orogeny; D2/M2, causing foliation S2, which was generated under amphibolite facies conditions (717.9 °C and 5.84 kbars), and the emplacement of I- and S-type granite during the Içana Orogen, and low-temperature D3, associated with the K'Mudku Event, which caused foliation S3 and reworking via transcurrent shear zones under greenschist facies conditions.

Traces in the dark: sedimentary processes and facies gradients in the upper shale member of the Upper Devonian-Lower Mississippian Bakken Formation, Williston Basin, North Dakota, U.S.A.

USGS Publications Warehouse

Egenhoff, Sven O.; Fishman, Neil S.

2013-01-01

Black, organic-rich rocks of the upper shale member of the Upper Devonian–Lower Mississippian Bakken Formation, a world-class petroleum source rock in the Williston Basin of the United States and Canada, contain a diverse suite of mudstone lithofacies that were deposited in distinct facies belts. The succession consists of three discrete facies associations (FAs). These comprise: 1) siliceous mudstones; 2) quartz- and carbonate-bearing, laminated mudstones; and 3) macrofossil-debris-bearing massive mudstones. These FAs were deposited in three facies belts that reflect proximal to distal relationships in this mudstone system. The macrofossil-debris-bearing massive mudstones (FA 3) occur in the proximal facies belt and contain erosion surfaces, some with overlying conodont and phosphate–lithoclast lag deposits, mudstones with abundant millimeter-scale siltstone laminae showing irregular lateral thickness changes, and shell debris. In the medial facies belt, quartz- and carbonate-bearing, laminated mudstones dominate, exhibiting sub-millimeter-thick siltstone layers with variable lateral thicknesses and localized mudstone ripples. In the distal siliceous mudstone facies belt, radiolarites, radiolarian-bearing mudstones, and quartz- and carbonate-bearing, laminated mudstones dominate. Overall, total organic carbon (TOC) contents range between about 3 and 10 wt %, with a general proximal to distal decrease in TOC content. Abundant evidence of bioturbation exists in all FAs, and the lithological and TOC variations are paralleled by changes in burrowing style and trace-fossil abundance. While two horizontal traces and two types of fecal strings are recognized in the proximal facies belt, only a single horizontal trace fossil and one type of fecal string characterize mudstones in the distal facies belt. Radiolarites intercalated into the most distal mudstones are devoid of traces and fecal strings. Bedload transport processes, likely caused by storm-induced turbidity currents, were active across all facies belts. Suspended sediment settling from near the ocean surface, however, most likely played a role in the deposition of some of the mudstones, and was probably responsible for deposition of the radiolarites. The distribution pattern of high-TOC sediments in proximal and lower-TOC deposits in some distal facies is interpreted as a function of higher accumulation rates during radiolarian depositional events leading to a decrease in suspension-derived organic carbon in radiolarite laminae. The presence of burrows in all FAs and nearly all facies in the upper Bakken shale member indicates that dysoxic conditions prevailed during its deposition. This study shows that in intracratonic high-TOC mudstone successions such as the upper Bakken shale member bed-load processes most likely dominated sedimentation, and conditions promoted a thriving infaunal benthic community. As such, deposition of the upper Bakken shale member through dynamic processes in an overall dysoxic environment represents an alternative to conventional anoxic depositional models for world-class source rocks.

Sediment facies of Enewetak Atoll lagoon. Geologic and geophysical investigations of Enewetak Atoll, Republic of the Marshall Islands. Professional paper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wardlaw, B.R.; Henry, T.W.; Martin, W.E.

1991-01-01

Two sets of benthic (bottom-surface) samples were taken from the lagoon on Enewetak Atoll, Republic of the Marshall Islands, during the PEACE Program (1984-1985). These samples were collected to (1) familiarize project geologists with the distribution of sediment types and facies within Enewetak lagoon, (2) increase understanding of the distribution of modern microfaunas in the lagoon, and (3) supplement studies of the sea-floor features both within and near OAK and KOA craters. The benthic sample studies aided both evaluation of the stratigraphic sequence penetrated during the Drilling Phase and interpretation of the litho- and biostratigraphic framework used in analysis ofmore » OAK and KOA.« less

Dealing with spatial heterogeneity

NASA Astrophysics Data System (ADS)

Marsily, Gh.; Delay, F.; Gonçalvès, J.; Renard, Ph.; Teles, V.; Violette, S.

2005-03-01

Heterogeneity can be dealt with by defining homogeneous equivalent properties, known as averaging, or by trying to describe the spatial variability of the rock properties from geologic observations and local measurements. The techniques available for these descriptions are mostly continuous Geostatistical models, or discontinuous facies models such as the Boolean, Indicator or Gaussian-Threshold models and the Markov chain model. These facies models are better suited to treating issues of rock strata connectivity, e.g. buried high permeability channels or low permeability barriers, which greatly affect flow and, above all, transport in aquifers. Genetic models provide new ways to incorporate more geology into the facies description, an approach that has been well developed in the oil industry, but not enough in hydrogeology. The conclusion is that future work should be focused on improving the facies models, comparing them, and designing new in situ testing procedures (including geophysics) that would help identify the facies geometry and properties. A world-wide catalog of aquifer facies geometry and properties, which could combine site genesis and description with methods used to assess the system, would be of great value for practical applications. On peut aborder le problème de l'hétérogénéité en s'efforçant de définir une perméabilité équivalente homogène, par prise de moyenne, ou au contraire en décrivant la variation dans l'espace des propriétés des roches à partir des observations géologiques et des mesures locales. Les techniques disponibles pour une telle description sont soit continues, comme l'approche Géostatistique, soit discontinues, comme les modèles de faciès, Booléens, ou bien par Indicatrices ou Gaussiennes Seuillées, ou enfin Markoviens. Ces modèles de faciès sont mieux capables de prendre en compte la connectivité des strates géologiques, telles que les chenaux enfouis à forte perméabilité, ou au contraire les faciès fins de barrières de perméabilité, qui ont une influence importante sur les écoulement, et, plus encore, sur le transport. Les modè les génétiques récemment apparus ont la capacité de mieux incorporer dans les modèles de faciès les observations géologiques, chose courante dans l'industrie pétrolière, mais insuffisamment développée en hydrogéologie. On conclut que les travaux de recherche ultérieurs devraient s'attacher à développer les modèles de faciès, à les comparer entre eux, et à mettre au point de nouvelles méthodes d'essais in situ, comprenant les méthodes géophysiques, capables de reconnaître la géométrie et les propriétés des faciès. La constitution d'un catalogue mondial de la géométrie et des propriétés des faciès aquifères, ainsi que des méthodes de reconnaissance utilisées pour arriver à la détermination de ces systèmes, serait d'une grande importance pratique pour les applications. La heterogeneidad se puede manejar por medio de la definición de características homogéneas equivalentes, conocidas como promediar o tratando de describir la variabilidad espacial de las características de las rocas a partir de observaciones geológicas y medidas locales. Las técnicas disponibles para estas descripciones son generalmente modelos geoestadísticos continuos o modelos de facies discontinuos como los modelos Boolean, de Indicador o de umbral de Gaussian y el modelo de cadena de Markow. Estos modelos de facies son mas adecuados para tratar la conectvidad de estratos geológicos (por ejemplo canales de alta permeabilidad enterrados o barreras de baja permeabilidad que tienen efectos importantes sobre el flujo y especialmente sobre el transporte en los acuíferos. Los modelos genéticos ofrecen nuevas formas de incorporar más geología en las descripciones de facies, un enfoque que está bien desarollado en la industria petrolera, pero insuficientemente en la hidrogeología. Se concluye que los trabajos futuros deberían estar más enfocados en mejorar los modelos de facies, en establecer comparaciones y en diseñar nuevos procedimientos para pruebas in-situ (incuyendo la geofísica) que pueden ayudar a identificar la geometría de las facies y sus propiedades. Un catálogo global de la geometría de las facies de los acuíferos y sus características, que podría combinar la génesis de los sitios y descripciones de los métodos utilizados para evaluar el sistema, sería de gran valor para las aplicaciones prácticas.

Evaluation of conditions along the grounding line of temperate marine glaciers: An example from Muir Inlet, Glacier Bay, Alaska

USGS Publications Warehouse

Seramur, K.C.; Powell, R.D.; Carlson, P.R.

1997-01-01

In the marine environment, stability of the glacier terminus and the location of subglacial streams are the dominant controls on the distribution of grounding-line deposits within morainal banks. A morainal bank complex in Muir Inlet, Glacier Bay, SE Alaska, is used to develop a model of terminus stability and location of subglacial streams along the grounding line of temperate marine glaciers. This model can be used to interpret former grounding-line conditions in other glacimarine settings from the facies architecture within morainal bank deposits. The Muir Inlet morainal bank complex was deposited between 1860 A.D. and 1899 A.D., and historical observations provide a record of terminus positions, glacial retreat rates and sedimentary sources. These data are used to reconstruct the depositional environment and to develop a correlation between sedimentary facies and conditions along the grounding line. Four seismic facies identified on the high-resolution seismic-reflection profiles are used to interpret sedimentary facies within the morainal bank complex. Terminus stability is interpreted from the distribution of sedimentary facies within three distinct submarine geomorphic features, a grounding-line fan; stratified ridges, and a field of push ridges. The grounding-line fan was deposited along a stable terminus and is represented on seismic-reflection profiles by two distinct seismic facies, a proximal and a distal fan facies. The proximal fan facies was deposited at the efflux of subglacial streams and indicates the location of former glacifluvial discharges into the sea. Stratified ridges formed as a result of the influence of a quasi-stable terminus on the distribution of sedimentary facies along the grounding line. A field of push ridges formed along the grounding line of an unstable terminus that completely reworked the grounding-line deposits through glacitectonic deformation. Between 1860 A.D. and 1899 A.D. (39 years), 8.96 x 108 m3 of sediment were deposited within the Muir Inlet morainal bank complex at an average annual sediment accumulation rate of 2.3 x 107 m3/a. This rate represents the annual sediment production capacity of the glacier when the Muir Inlet drainage basin is filled with glacial ice.

Unraveling the polymetamorphic history of garnet-bearing metabasites: Insights from the North Motagua Mélange (Guatemala Suture Zone)

NASA Astrophysics Data System (ADS)

Bonnet, G.; Flores, K. E.; Martin, C.; Harlow, G. E.

2014-12-01

The Guatemala Suture Zone is the fault-bound region in central Guatemala that contains the present North American-Caribbean plate boundary. This major composite geotectonic unit contains a variety of ophiolites, serpentinite mélanges, and metavolcano-sedimentary sequences along with high-grade schists, gneisses, low-grade metasediments and metagranites thrusted north and south of the active Motagua fault system (MFS). The North Motagua Mélange (NMM) outcrops north of the MFS and testifies the emplacement of exhumed subduction assemblages along a collisional tectonic setting. The NMM is composed of a serpentinite-matrix mélange that contains blocks of metabasites (subgreenschist facies metabasalt, grt-blueschist, eclogite, grt-amphibolite), vein-related rocks (jadeitite, omphacitite, albitite, mica-rock), and metatrondhjemites. Our new detailed petrographic and thermobarometric study on the garnet-bearing metabasites reveals a complex polymetamorphic history with multiple tectonic events. Eclogites show a classical clockwise PT path composed of (a) prograde blueschist/eclogite facies within garnet cores, (b) eclogite facies metamorphic peak at ~1.7 GPa and 620°C, (c) post-peak blueschist facies, (d) amphibolite facies overprint, and (e) late stage greenschist facies. Two types of garnet amphibolite blocks can be found, the first consist of (a) a relict eclogite facies peak at ~1.3 GPa and 550°C only preserved within anhedral garnet cores, and (b) surrounded by a post-peak amphibolite facies. In contrast, the second type displays a prograde amphibolite facies at 0.6-1.1 GPa and 400-650°C. The eclogites metamorphic peak suggests formation in a normal subduction zone at ~60 km depth, a subsequent exhumation to the middle section of the subduction channel (~35 km), and a later metamorphic reworking at lower P and higher T before its final exhumation. The first type of garnet amphibolite shows a similar trajectory as the eclogites but at warmer conditions. In contrast, the second type of garnet amphibolite recorded a single prograde evolution along a hotter thermal gradient. These different PT paths suggest multiple metamorphic events that may be related to subduction initiation, partial exhumation and storage of HP-LT rocks, subduction of buoyant crust, final exhumation and obduction.

Analysis of hydrogeochemical facies in groundwater of upper part of Cross River Basin, southeastern Nigeria

NASA Astrophysics Data System (ADS)

Stephen, Ukpai N.; Celestine, Okogbue O.; Solomon, Onwuka O.

2017-07-01

Upper Cross River Hydrogeological Basin lies within latitudes 60 021N to 60 241N and longitudes 80 001E to 80 161E, and is generally underlain by shales of Asu River group of Albian age. The area has Histories of intensive mineralization which influenced groundwater system, resulting to occurrence of different water types. This study determines the various water types via evaluation of major ion concentration from representative water samples collected across the area. Twenty (20) water samples were analyzed using Spectrophotometer of HACH DR/2010 series, and results showed that groundwater in the area is generally hard and polluted with TDS in some places. Statistical inspection was performed on the results using aqua-chem, and it delineated five hydro-chemical facies, namely: Ca-Mg-Cl-S04, Ca-Mg-HCO3-Cl-SO4, Ca-Mg-HCO3, Na-K-HCO3 and Na-K-Cl-SO4; all lie between slight acidic and weak alkaline water. These chemical facies (water types) diffused from non-point sources in urban area and point source from south of Abakaliki town. The dispersion of the facies plumes is possibly controlled by advection process through structural weak zones such as fractures. Hydraulic heads determined from hand-dug wells indicate local potentiometric surfaces, hence, showed local groundwater flow system which is possibly controlled by the underlying low permeable aquicludes formed by shales. The protective capacity of the aquitards was somewhat reduced by the permeating fractures which exposed the aquifers to polluting effects of mineralized water-types.

Metasomatized ancient lithospheric mantle beneath the young Zealandia microcontinent and its role in HIMU-like intraplate magmatism

NASA Astrophysics Data System (ADS)

Scott, J. M.; Waight, T. E.; van der Meer, Q. H. A.; Palin, J. M.; Cooper, A. F.; Münker, C.

2014-09-01

There has been long debate on the asthenospheric versus lithospheric source for numerous intraplate basalts with ocean island basalt (OIB) and high time-integrated U/Pb (HIMU)-like source signatures that have erupted through the Zealandia continental crust. Analysis of 157 spinel facies peridotitic mantle xenoliths from 25 localities across Zealandia permits the first comprehensive regional description of the subcontinental lithospheric mantle (SCLM) and insights into whether it could be a source to the intraplate basalts. Contrary to previous assumptions, the Oligocene-Miocene Zealandia SCLM is highly heterogeneous. It is composed of a refractory craton-like domain (West Otago) adjacent to several moderately fertile domains (East Otago, North Otago, Auckland Islands). Each domain has an early history decoupled from the overlying Carboniferous and younger continental crust, and each domain has undergone varying degrees of depletion followed by enrichment. Clinopyroxene grains reveal trace element characteristics (low Ti/Eu, high Th/U) consistent with enrichment through reaction with carbonatite. This metasomatic overprint has a composition that closely matches HIMU in Sr, Pb ± Nd isotopes. However, clinopyroxene Hf isotopes are in part highly radiogenic and decoupled from the other isotope systems, and also mostly more radiogenic than the intraplate basalts. If the studied spinel facies xenoliths are representative of the thin Zealandia SCLM, the melting of garnet facies lithosphere could only be the intraplate basalt source if it had a less radiogenic Hf-Nd isotope composition than the investigated spinel facies, or was mixed with asthenosphere-derived melts containing less radiogenic Hf.

Assemblages of organic-walled phytoplankton, pollen, and spores from the Solenovian Horizon (lower Oligocene) of Western Eurasia

NASA Astrophysics Data System (ADS)

Zaporozhets, N. I.; Akhmetiev, M. A.

2015-05-01

The analysis of organic-walled phytoplankton, pollen, and spores in sections of the Solenovian Horizon (second half of the lower Oligocene) in the Western Carpathians, Crimea-Caucasus region, and Scythian and Turan plates revealed that facies of a more desalinated basin (lower, Polbian Subhorizon) are characterized by a more impoverished assemblage of dinocysts, prasinophytes, and acritarchs numbering up to 20-30 taxa. Depending on facies properties, they are dominated by representatives of Batiacasphaera accompanied by thin-walled Hystrichokolpoma morphotypes or cysts of the Adnatosphaeridium-Glaphyrocysta Group, which allows facies to be defined as bed-ranked units within the single lower Oligocene Wetzeliella gochtii dinocyst zone. The organic-walled phytoplankton assemblage from the upper (Ikiburulian) subhorizon implies the frequently alternating salinity regime for this inner basin. The palynological assemblages of the Solenovian Horizon are characterized by a high share of Pinus pollen accompanied by pollen of Fagaceae (particularly in southern areas), Juglandaceae, and diverse thermophilic plants including evergreen taxa. The Solenovian climate was subtropical in western and southern areas and moderately warm seasonal with hot summers in others. The dominant arid climate was interrupted by brief humid episodes.

[Burden of proof in medical cases--presumption of fact and prima facie evidence. II. Presumption of fact and prima facie evidence].

PubMed

Sliwka, Marcin

2004-01-01

The aim of this paper was to present the main rules concerning the burden of proof in polish civil trials, including medical cases. The standard rules were presented with all the important exclusions such as presumption of law and fact or prima facie evidence. The author analyses the effect of these institutions on burden of proof in medical cases. The difference between presumptions of fact and prima facie evidence was analysed and explained. This paper also describes the importance of the res ipsa loquitur rule in United Kingdom and USA. This paper includes numerous High Court sentences on evidential and medical issues.

Organic content of Devonian shale in western Appalachian basin.

USGS Publications Warehouse

Schmoker, J.W.

1980-01-01

In the organic-rich facies of the Devonian shale in the western part of the Appalachian basin, the distribution of organic matter provides an indirect measure of both gas in place and the capacity of the shale to supply gas to permeable pathways.The boundary between organic-rich ('black') and organic-poor ('gray') facies is defined here as 2% organic content by volume. The thickness of organic-rich facies ranges from 200ft in central Kentucky to 1000ft along the Kentucky-West Virginia border. The average content of the organic-rich facies increases from 5% by volume on the edge to 16% in central Kentucky. The net thickness of organic matter in the organic-rich facies shows the amount of organic material in the shale, and is the most fundamental of the organic-content characterizations. Net thickness of organic matter ranges between 20 and 80ft (6.1 and 24.4m) within the mapped area.-from Author

Deciphering the record of short-term base-level changes in Gilbert-type deltas

NASA Astrophysics Data System (ADS)

Gobo, Katarina; Ghinassi, Massimiliano; Nemec, Wojciech

2016-04-01

The geometrical relationship of fluvial topset to subaqueous foreset in a Gilbert-type delta may be 'sigmoidal' (transitional) or 'oblique' (erosional), which is generally attributed - respectively - to a rise or fall of the delta shoreline's time-distance trajectory and considered to reflect base-level changes. However, since every episode of a base-level fall forces the fluvial distributary system to cut down, the delta-brink sigmoidal signature of a preceding base-level rise tends to be removed. The geometrical record of short-term base-level changes in a Gilbert-type delta thus tends to be obliterated by fluvial erosion. The issue addressed in this presentation is whether the fully-preserved foreset to bottomset deposits may serve as a key for deciphering the base-level history of an ancient Gilbert-type delta. Outcrop studies of Plio-Pleistocene Gilbert-type deltas at the southern margin of the Corinth Rift, Greece, reveal a genetic relationship between the delta-brink morphodynamics controlled by base level behaviour and the processes of subaqueous sediment dispersal on the delta slope and in its foot zone. The component facies are deposits of turbidity currents (whether slope-derived brief surges or longer-duration hyperpycnal flows), cohesionless debrisflows and loose-gravel debrisfalls. The development of sigmoidal delta-brink architecture appears to be accompanied by deposition of a debrite-dominated facies assemblage (DFA) of delta foreset beds, thought to form when the aggrading delta front tends to store sediment and undergoes discrete gravitational collapses. Development of oblique delta-brink architecture is accompanied by deposition of a turbidite-dominated facies assemblage (TFA) of foreset beds, which is thought to form when the delta-front accommodation decreases and the sediment carried by hyperpycnal effluent largely bypasses the front. The alternation of TFA and DFA facies assemblages in delta foreset is thus attributed to changes in delta-front accommodation driven by short-term base-level changes, with some accompanying inevitable 'noise' in the facies record due to the system autogenic variability and regional climatic fluctuations. Comparison of delta coeval foreset and toeset/bottomset deposits in a delta shows further a reverse pattern of reciprocal changes in facies assemblages, with the TFA assemblage of foreset deposits passing downdip into a DFA assemblage of delta-foot deposits, and the DFA assemblage of foreset deposits passing downdip into a TFA assemblage. This reverse reciprocal alternation of TFA and DFA facies assemblages is attributed to the delta-slope own morphodynamics. When the delta slope is dominated by deposition of debrisflows, only the most diluted turbulent flows and chute bypassing turbidity currents are reaching the delta-foot zone. When the delta slope is dominated by turbiditic sedimentation, larger chutes and gullies form - triggering and conveying debrisflows to the foot zone. These case studies as a whole shed a new light on the varying pattern of subaqueous sediment dispersal processes in an evolving Gilbert-type deltaic system and point to an the attractive possibility of the recognition of a 'hidden' record of base-level changes on the basis of detailed facies analysis.

Anatomy of the grainstone shoal facies of the Salem Limestone (Mississippian) of southern Indiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dodd, J.R.; Petzold, D.D.; Thompson, T.A.

In 1990 M.A. Brown described the middle Mississippian (Valmeyeran) Salem Limestone exposed on the eastern side of the Illinois Basin as consisting of a massive grainstone shoal facies behind which developed a sand flat, an open lagoon, and a restricted lagoon facies. Smaller intrashoal channels provided limited exchange between lagoon and open ocean. The authors have made detailed studies of sedimentary structures and petrography of the shoal facies in three settings: the shoal proper, an intrashoal channel, and an intershoal channel. The shoal and channel facies consists of tabular-planar and trough cross-stratified beds of grainstone containing echinoderm and fenestrate bryozoanmore » grains as their primary constituents. Prominent hardgrounds that have up to 1 m of erosional relief occur in two of the sections. Despite the apparent uniformity of composition of the shoal, porosity and especially permeability varies over a wide range, suggesting a range of cementation patterns within the shoal. Most of the cement in the shoal consists of syntaxial overgrowths on echinoderm grains. Cementation is less and thus porosity and permeability greater, in portions of the shoals containing a lower concentration of echinoderm grains and grains with thick micrite envelopes. However, some portions of the intershoal channel facies that contain a high percentage of ooids have reduced porosity and permeability due to crushing of ooids, producing micrite that clogged the pores. Primary sedimentary features of the shoal facies were produced predominantly by storm reworking of carbonate grains produced in situ and perhaps in part washed in from surrounding environments.« less

A locally adaptive kernel regression method for facies delineation

NASA Astrophysics Data System (ADS)

Fernàndez-Garcia, D.; Barahona-Palomo, M.; Henri, C. V.; Sanchez-Vila, X.

2015-12-01

Facies delineation is defined as the separation of geological units with distinct intrinsic characteristics (grain size, hydraulic conductivity, mineralogical composition). A major challenge in this area stems from the fact that only a few scattered pieces of hydrogeological information are available to delineate geological facies. Several methods to delineate facies are available in the literature, ranging from those based only on existing hard data, to those including secondary data or external knowledge about sedimentological patterns. This paper describes a methodology to use kernel regression methods as an effective tool for facies delineation. The method uses both the spatial and the actual sampled values to produce, for each individual hard data point, a locally adaptive steering kernel function, self-adjusting the principal directions of the local anisotropic kernels to the direction of highest local spatial correlation. The method is shown to outperform the nearest neighbor classification method in a number of synthetic aquifers whenever the available number of hard data is small and randomly distributed in space. In the case of exhaustive sampling, the steering kernel regression method converges to the true solution. Simulations ran in a suite of synthetic examples are used to explore the selection of kernel parameters in typical field settings. It is shown that, in practice, a rule of thumb can be used to obtain suboptimal results. The performance of the method is demonstrated to significantly improve when external information regarding facies proportions is incorporated. Remarkably, the method allows for a reasonable reconstruction of the facies connectivity patterns, shown in terms of breakthrough curves performance.

Facies transition and depositional architecture of the Late Eocene tide-dominated delta in northern coast of Birket Qarun, Fayum, Egypt

NASA Astrophysics Data System (ADS)

Abdel-Fattah, Zaki A.

2016-07-01

Late Eocene successions in the Fayum Depression display notable facies transition from open-marine to brackish-marine realms. Stratigraphic and sedimentologic characteristics of the depositional facies are integrated with ichnological data for the recognition of four facies associations (FA1 to FA4). The transition from open-marine sandstones (FA1) to the brackish-marine deposits (FA2) heralds a transgressive - regressive dislocation. The shallowing- and coarsening-upward progradation from the basal prodelta mudstone-dominated facies (FA2a) to deltafront heterolithics (FA2b) and sandstone facies (FA2c) are overlain by finning-upward delta plain deposits which are expressed by the delta plain mudstone (FA2d) and erosive-based distributary channel fills (FA4). Prodelta/deltfront deposits of FA2 are arranged in thinning- and coarsening-upward parasequences which are stacked in a shallowing-upward progressive cycle. Shallow-marine fossiliferous sandstones (FA3) mark the basal part of each parasequence. Stratigraphic and depositional architectures reflect a tide-dominated delta rather than an estuarine and incised valley (IV) model. This can be evinced by the progressive facies architecture, absence of basal regional incision or a subaerial unconformity and the stratigraphic position above a maximum flooding surface (MFS), in addition to the presence of multiple tidally-influenced distributary channels. Stratigraphic and depositional characteristics of the suggested model resemble those of modern tide-dominated deltaic systems. Accordingly, this model contributes to our understanding of the depositional models for analogous brackish-marine environments, particularly tide-dominated deltas in the rock record.

Estimating Last Glacial Maximum Ice Thickness Using Porosity and Depth Relationships: Examples from AND-1B and AND-2A Cores, McMurdo Sound, Antarctica

NASA Astrophysics Data System (ADS)

Hayden, T. G.; Kominz, M. A.; Magens, D.; Niessen, F.

2009-12-01

We have estimated ice thicknesses at the AND-1B core during the Last Glacial Maximum by adapting an existing technique to calculate overburden. As ice thickness at Last Glacial Maximum is unknown in existing ice sheet reconstructions, this analysis provides constraint on model predictions. We analyze the porosity as a function of depth and lithology from measurements taken on the AND-1B core, and compare these results to a global dataset of marine, normally compacted sediments compiled from various legs of ODP and IODP. Using this dataset we are able to estimate the amount of overburden required to compact the sediments to the porosity observed in AND-1B. This analysis is a function of lithology, depth and porosity, and generates estimates ranging from zero to 1,000 meters. These overburden estimates are based on individual lithologies, and are translated into ice thickness estimates by accounting for both sediment and ice densities. To do this we use a simple relationship of Xover * (ρsed/ρice) = Xice; where Xover is the overburden thickness, ρsed is sediment density (calculated from lithology and porosity), ρice is the density of glacial ice (taken as 0.85g/cm3), and Xice is the equalivant ice thickness. The final estimates vary considerably, however the “Best Estimate” behavior of the 2 lithologies most likely to compact consistently is remarkably similar. These lithologies are the clay and silt units (Facies 2a/2b) and the diatomite units (Facies 1a) of AND-1B. These lithologies both produce best estimates of approximately 1,000 meters of ice during Last Glacial Maximum. Additionally, while there is a large range of possible values, no combination of reasonable lithology, compaction, sediment density, or ice density values result in an estimate exceeding 1,900 meters of ice. This analysis only applies to ice thicknesses during Last Glacial Maximum, due to the overprinting effect of Last Glacial Maximum on previous ice advances. Analysis of the AND-2A core is underway, and results will be compared to those of AND-1B.

Comparison of clay mineral stratigraphy to other proxy palaeoclimate indicators in the Mesozoic of NW Europe.

PubMed

Ruffell, Alastair; McKinley, Jennifer M; Worden, Richard H

2002-04-15

This paper reviews the opportunities and pitfalls associated with using clay mineralogical analysis in palaeoclimatic reconstructions. Following this, conjunctive methods of improving the reliability of clay mineralogical analysis are reviewed. The Mesozoic succession of NW Europe is employed as a case study. This demonstrates the relationship between clay mineralogy and palaeoclimate. Proxy analyses may be integrated with clay mineralogical analysis to provide an assessment of aridity-humidity contrasts in the hinterland climate. As an example, the abundance of kaolinite through the Mesozoic shows that, while interpretations may be difficult, the Mesozoic climate of NW Europe was subject to great changes in rates of continental precipitation. We may compare sedimentological (facies, mineralogy, geochemistry) indicators of palaeoprecipitation with palaeotemperature estimates. The integration of clay mineralogical analyses with other sedimentological proxy indicators of palaeoclimate allows differentiation of palaeoclimatic effects from those of sea-level and tectonic change. We may also observe how widespread palaeoclimate changes were; whether they were diachronous or synchronous; how climate, sea level and tectonics interact to control sedimentary facies and what palaeoclimate indicators are reliable.

Kimberlite emplacement record in diamond morphology

NASA Astrophysics Data System (ADS)

Fedortchouk, Y.; Chinn, I.

2015-12-01

Diamond resorption morphology reflects conditions and events in the host kimberlite magma and in diamond sources in subcratonic mantle. Recent experimental studies on diamond dissolution enable us now to use surface features of diamonds to examine magmatic fluid in kimberlites. This study uses optical and scanning electron microscopy examination of ~750 macro-diamonds from two kimberlites in Orapa cluster, Botswana. Kimberlite A is a simple body filled with coherent kimberlite facies (CK); kimberlite B is a complex body with two facies of coherent kimberlite and a massive volcaniclastic kimberlite facies (MVK). Distinction between kimberlite-induced and mantle-derived resorption was based on: the type of the most abundant resorption style, morphology of crystals with attached kimberlite fragments, and the study of pseudohemimorphic diamonds. Kimberlite-induced resorption is the focus of this work. The three facies in the pipe B show three contrasting diamond resorption types. Resorption in MVK facies leads to glossy rounded surfaces with fine striation and hillocks, and is identical to the resorption style in CK facies of pipe A. This type of resorption is typical for volcaniclastic facies and indicates emplacement in the presence of abundant COH fluid with high H2O:CO2 ratio (>50mol% of H2O). We propose that pipe A is a root zone supplying material to a larger kimberlite body filled with VK. The two CK in pipe B have very different resorption style. One forms similar glossy surfaces but with regular small cavities of rounded outline, while the other seems more corrosive and develops extremely rough features and deep cavities. Comparison to the experimental data suggests that the former had almost pure H2O fluid at low pressure (where solubility of SiO2 is low). The later CK facies was emplaced in the absence or very low abundance of a free fluid, and possibly in melt closer to carbonatitic composition.

Mineralogy and Geochemistry of the Main Glauconite Bed in the Middle Eocene of Texas: Paleoenvironmental Implications for the Verdine Facies

PubMed Central

Harding, Sherie C.; Nash, Barbara P.; Petersen, Erich U.; Ekdale, A. A.; Bradbury, Christopher D.; Dyar, M. Darby

2014-01-01

The Main Glauconite Bed (MGB) is a pelleted greensand located at Stone City Bluff on the south bank of the Brazos River in Burleson County, Texas. It was deposited during the Middle Eocene regional transgression on the Texas Gulf Coastal Plain. Stratigraphically it lies in the upper Stone City Member, Crockett Formation, Claiborne Group. Its mineralogy and geochemistry were examined in detail, and verdine facies minerals, predominantly odinite, were identified. Few glauconitic minerals were found in the green pelleted sediments of the MGB. Without detailed mineralogical work, glaucony facies minerals and verdine facies minerals are easily mistaken for one another. Their distinction has value in assessing paleoenvironments. In this study, several analytical techniques were employed to assess the mineralogy. X-ray diffraction of oriented and un-oriented clay samples indicated a clay mixture dominated by 7 and 14Å diffraction peaks. Unit cell calculations from XRD data for MGB pellets match the odinite-1M data base. Electron microprobe analyses (EMPA) from the average of 31 data points from clay pellets accompanied with Mössbauer analyses were used to calculate the structural formula which is that of odinite: Fe3+ 0.89 Mg0.45 Al0.67 Fe2+ 0.30 Ti0.01 Mn0.01) Σ = 2.33 (Si1.77 Al0.23) O5.00 (OH)4.00. QEMSCAN (Quantitative Evaluation of Minerals by Scanning Electron Microscopy) data provided mineral maps of quantitative proportions of the constituent clays. The verdine facies is a clay mineral facies associated with shallow marine shelf and lagoonal environments at tropical latitudes with iron influx from nearby runoff. Its depositional environment is well documented in modern nearshore locations. Recognition of verdine facies clays as the dominant constituent of the MGB clay pellets, rather than glaucony facies clays, allows for a more precise assessment of paleoenvironmental conditions. PMID:24503875

Shallow water mud-mounds of the Early Devonian Buchan Group, East Gippsland, Australia

NASA Astrophysics Data System (ADS)

Tosolini, A.-M. P.; Wallace, M. W.; Gallagher, S. J.

2012-12-01

The Lower Devonian Rocky Camp Member of the Murrindal Limestone, Buchan Group of southeastern Australia consists of a series of carbonate mud-mounds and smaller lagoonal bioherms. The Rocky Camp mound is the best exposed of the mud-mounds and has many characteristics in common with Waulsortian (Carboniferous) mounds. Detailed paleoecological and sedimentological studies indicate that the mound initially accumulated in the photic zone, in contrast to most of the previously recorded mud-mounds. Five facies are present in the mud-mound: a Dasycladacean Wackestone Facies at the base of the mound represents a moderate energy, shallow water bank environment within the photic zone. A Crinioidal Wackestone Facies was deposited in a laterally equivalent foreslope setting. A Poriferan-Crinoidal Mudstone Facies developed in a quiet, deeper water, lee-side mound setting associated with a minor relative sea-level rise. A Stromatoporoid-Coralline Packstone Facies in the upper part of the mound deposited in a high-energy, fair-weather wave base, mound-front environment. The crest of the mound is represented by a Crinoidal-Receptaculitid Packstone Facies indicative of a moderate-energy mound-top environment in the photic zone, sheltered by the mound-front stromatoporoid-coral communities. A mound flank facies is present on the southern side of the mound and this consists of high-energy crinoidal grainstones. Mud-mound deposition was terminated by a transgression that deposited dark gray, fossil-poor marl of the overlying Taravale Formation. The Rocky Camp mound appears to have originated in shallow water photic zone conditions and grew into a high-energy environment, with the mound being eventually colonized by corals and stromatoporoids. The indications of a high-energy environment during later mound growth (growth form of colonial metazoans and grainstones of the flanking facies) suggest that the micrite in the mound was autochthonous and implies the presence of an energy damping mechanism (probably biological) at the mound surface.

Facies Analysis and Depositional environment of the Oligocene-Miocene Qom Formation in the Central Iran (Semnan area)

NASA Astrophysics Data System (ADS)

Sabouhi, Mostafa; Sheykh, Morteza; Darvish, Zohreh; Naghavi Azad, Maral

2010-05-01

The Qom formation was formed in the Oligo-Miocene during the final sea transgression in Central Iran. This Formation in the Central Iran Basin Contains oil and gas. Organic geochemical analysis in previous studies indicated that the hydrocarbons migrated from deeper source rocks, likely of Jurassic age. In the Central Iran Basin, the Qom Formation is 1,200m thick and is abounded by the Oligocene Lower Red Formation and the middle Miocene Upper Red Formation. In previous studies, the Qom Formation was divided into nine members designated from oldest to youngest: a, b, c1 to c4, d, e, and f, of which "e" is 300m thick and constitutes the main reservoir. Our study focused on a Qom Section located in the Arvaneh (Semnan) region of Central Iran that is 498m thick. The lower part of the formation was not deposited, and only the following four members of early Miocene age (Aquitanian-Burdigalian) was identified between the lower and upper Red Formation. The studied section mainly consist of limestone, marl, sandy limestone, sandy marl and argillaceous limestone.According to this study(field and laboratory investigations), 9 carbonate microfacies were recognized which are grouped into four facies associations (microfacies group). These facies associations present platform to basin depositional setting and are nominated as: A (Tidal-flat), B (Lagoon), C (Slope) and D (Open marine). Based on paleoecology and Petrographic analysis, it seems the Qom Formation was deposited in a Carbonate shelf setting. The Qom formation constitutes a regional transgressive-regressive sequence that is bounded by two continental units (Lower and Upper Red Formation).

Numerical modelling in biosciences using delay differential equations

NASA Astrophysics Data System (ADS)

Bocharov, Gennadii A.; Rihan, Fathalla A.

2000-12-01

Our principal purposes here are (i) to consider, from the perspective of applied mathematics, models of phenomena in the biosciences that are based on delay differential equations and for which numerical approaches are a major tool in understanding their dynamics, (ii) to review the application of numerical techniques to investigate these models. We show that there are prima facie reasons for using such models: (i) they have a richer mathematical framework (compared with ordinary differential equations) for the analysis of biosystem dynamics, (ii) they display better consistency with the nature of certain biological processes and predictive results. We analyze both the qualitative and quantitative role that delays play in basic time-lag models proposed in population dynamics, epidemiology, physiology, immunology, neural networks and cell kinetics. We then indicate suitable computational techniques for the numerical treatment of mathematical problems emerging in the biosciences, comparing them with those implemented by the bio-modellers.

Stratigraphy of the Morrison and related formations, Colorado Plateau region, a preliminary report

USGS Publications Warehouse

Craig, Lawrence C.; ,

1955-01-01

Three subdivisions of the Jurassic rocks of the Colorado Plateau region are: the Glen Canyon group, mainly eolian and fluvial sedimentary rocks; the San Rafael group, marine and marginal marine sedimentary rocks; and the Morrison formation, fluvial and lacustrine sedimentary rocks. In central and eastern Colorado the Morrison formation has not been differ- entiated into members. In eastern Utah, northeastern Arizona, northwestern New Mexico, and in part of western Colorado, the Morrison may be divided into a lower part and an upper part; each part has two members which are di1Ierentiated on a lithologic basis. Where differentiated, the lower part of the Morrison consists either of the Salt Wash member or the Recapture member or both; these are equivalent in age and inter tongue and intergrade over a broad area in the vicinity of the Four Corners area of New Mexico, Colorado, Arizona, and Utah. The Salt Wash member is present in eastern Utah and parts of western Colorado, north- eastern Arizona, and northwestern New Mexico. It was formed as a large alluvial plain or 'fan' by an aggrading system of braided streams diverging to the north and east from an apex in south-central Utah. The major source area of the Salt Wash was to the southwest of south-central Utah, probably in west-central Arizona and southeastern California. The member was derived mainly from sedimentary rocks. The Salt Wash deposits grade from predomi- nantly coarse texture at the apex of the 'fan' to predominantly flne texture at the margin of the 'fan'. The Salt Wash member has been arbitrarily divided into four facies: a con- glomera tic sandstone facies, a sandstone and mudstone facies, a claystone and lenticular sandstone facies, and a claystone and limestone facies. The Recapture member of the Morrison formation is present in northeastern Arizona, northwestern New Mexico, and small areas of southeastern Utah and southwestern Colorado near the Four Corners. It was formed as a large alluvial plain or 'fan' by an aggrading system of braided streams. The Recap- ture deposits grade from predominantly coarse texture sedimentary rocks to predominantly fine texture and have been arbitrarily divided into three facies: a conglomeratic sandstone facies, a sandstone facies, and a claystone and sandstone facies. The distribution of the facies indicates that the major source area of the Recapture was south of Gallup, N. Mex., probably in west-central New Mexico. The Recapture was derived from an area of intrusive and extrusive igneous rocks, metamorphic rocks, and sedimentary rocks. The upper part of the Morrison formation consists of the Westwater Canyon member and the Brushy Basin member. The Westwater Canyon member forms the lower portion of the upper part of the Morrison in northeastern Arizona, northwestern New Mexico, and places in southeastern Utah and southwestern Colorade near the Four Corners, and it intertongues and intergrades northward into the Brushy Basin member. The Westwater Canyon member was formed as a large alluvial plain or 'fan' by an aggrading system of braided streams. The Westwater deposits grade from predominantly coarse-textured sedimentary rocks to somewhat finer textured sedimentary rocks, and have been arbitrarily divided into two facies: a conglomeratic sandstone facies and a sandstone facies. The distribution of the facies indicates that the major source area of the Westwater was south of Gallup, N. Mex., probably in west-central New Mexico. The Westwater was derived from an area of intrusive and extrusive igneous rocks, metamorphic rocks, and sedimentary rocks. The similarity of the distribution and composition of the Westwater to the Recapture indicates that the Westwater represents essentially a continuation of deposition on the Recapture 'fan'; the Westwater contains, however, considerably coarser materials. Whereas the S

The sequence stratigraphy, sedimentology, and economic importance of evaporite carbonate transitions: a review

NASA Astrophysics Data System (ADS)

Sarg, J. F.

2001-04-01

World-class hydrocarbon accumulations occur in many ancient evaporite-related basins. Seals and traps of such accumulations are, in many cases, controlled by the stratigraphic distribution of carbonate-evaporite facies transitions. Evaporites may occur in each of the systems tracts within depositional sequences. Thick evaporite successions are best developed during sea level lowstands due to evaporative drawdown. Type 1 lowstand evaporite systems are characterized by thick wedges that fill basin centers, and onlap basin margins. Very thick successions (i.e. saline giants) represent 2nd-order supersequence set (20-50 m.y.) lowstand systems that cap basin fills, and provide the ultimate top seals for the hydrocarbons contained within such basins. Where slope carbonate buildups occur, lowstand evaporites that onlap and overlap these buildups show a lateral facies mosaic directly related to the paleo-relief of the buildups. This facies mosaic, as exemplified in the Silurian of the Michigan basin, ranges from nodular mosaic anhydrite of supratidal sabkha origin deposited over the crests of the buildups, to downslope subaqueous facies of bedded massive/mosaic anhydrite and allochthonous dolomite-anhydrite breccias. Facies transitions near the updip onlap edges of evaporite wedges can provide lateral seals to hydrocarbons. Porous dolomites at the updip edges of lowstand evaporites will trap hydrocarbons where they onlap nonporous platform slope deposits. The Desert Creek Member of the Paradox Formation illustrates this transition. On the margins of the giant Aneth oil field in southeastern Utah, separate downdip oil pools have accumulated where dolomudstones and dolowackestones with microcrystalline porosity onlap the underlying highstand platform slope. Where lowstand carbonate units exist in arid basins, the updip facies change from carbonates to evaporite-rich facies can also provide traps for hydrocarbons. The change from porous dolomites composed of high-energy, shallow water grainstones and packstones to nonporous evaporitic lagoonal dolomite and sabkha anhydrite occurs in the Upper Permian San Andres/Grayburg sequences of the Permian basin. This facies change provides the trap for secondary oil pools on the basinward flanks of fields that are productive from highstand facies identical to the lowstand dolograinstones. Type 2 lowstand systems, like the Smackover Limestone of the Gulf of Mexico, show a similar relationship. Commonly, these evaporite systems are a facies mosaic of salina and sabkha evaporites admixed with wadi siliciclastics. They overlie and seal highstand carbonate platforms containing reservoir facies of shoalwater nonskeletal and skeletal grainstones. Further basinward these evaporites change facies into similar porous platform facies, and contain separate hydrocarbon traps. Transgressions in arid settings over underfilled platforms (e.g. Zechstein (Permian) of Europe; Ferry Lake Anhydrite (Cretaceous), Gulf of Mexico) can result in deposition of alternating cyclic carbonates and evaporites in broad, shallow subaqueous hypersaline environments. Evaporites include bedded and palmate gypsum layers. Mudstones and wackestones are deposited in mesosaline, shallow subtidal to low intertidal environments during periodic flooding of the platform interior. Highstand systems tracts are characterized by thick successions of m-scale, brining upward parasequences in platform interior settings. The Seven Rivers Formation (Guadalupian) of the Permian basin typifies this transition. An intertonguing of carbonate and sulfates is interpreted to occur in a broad, shallow subaqueous hypersaline shelf lagoon behind the main restricting shelf-edge carbonate complex. Underlying paleodepositional highs appear to control the position of the initial facies transition. Periodic flooding of the shelf interior results in widespread carbonate deposition comprised of mesosaline, skeletal-poor peloid dolowackestones/mudstones. Progressive restriction due to active carbonate deposition and/or an environment of net evaporation causes brining upward and deposition of lagoonal gypsum. Condensed sections of organic-rich black lime mudstones occur in basinal areas seaward of the transgressive and highstand carbonate platforms and have sourced significant quantities of hydrocarbons.

The characterization of a point bar-channel aquifer analogue: from geostatistical simulation to solute transport through hydrofacies connectivity

NASA Astrophysics Data System (ADS)

Dell'Arciprete, Diana; Baratelli, Fulvia; Bersezio, Riccardo; Felletti, Fabrizio; Giudici, Mauro; Vassena, Chiara

2010-05-01

Ground water flow and solute transport are controlled by the geological structure and the corresponding heterogeneity and anisotropy of the hydraulic conductivity (K) field. In alluvial aquifers, a complete interdisciplinary characterization of the reservoir is important for reliable predictions. The reconstruction of the subsurface heterogeneity cannot be limited to honor point (e.g., well stratigraphic logs) data, but should also account for the presence of connected high K hydrofacies, which might form preferential flow paths. To explore these concepts an aquifer analogue, at the scale of the point-bar/channel depositional element of a meandering river, was studied. The analogue, exposed in a gravel pit, belongs to the historical sediments of the terraced meandering valley of the Lambro River (Po plain, Northern Italy). The study has been conducted in five steps. (1) Architectural and sedimentological modelling was based on 31 stratigraphic logs collected along five quarry faces (four in E-W direction and one in N-S direction) and a geophysical survey, whereas the hydrostratigraphical characterization was obtained by permeability analysis of 28 samples. Facies mapping was performed in the field and supported by the analysis of the photo-composition of the quarry faces to obtain the geometry, the hierarchy and the internal architecture of sedimentary bodies. Permeability measurements on undisturbed samples and estimates based on the grain-size distribution were compared with bibliography values and used to merge the facies into four hydrofacies: least permeable (very fine sand and silt-clay respectively from topmost channel-fill, silt/clay plugs, drapes and balls), low permeable (sand from point-bar and channel fill bedforms), medium permeable (sandy gravel e gravelly sand from point bars) and most permeable (lower part of lateral accreted units). (2) For a test volume of 11.4m × 11.4m × 2.85m 50 equiprobable simulations of the hydrofacies distribution have been obtained with SISIM (Sequential indicator simulation) and MPS (Multiple point simulation) on a grid of voxels of 20cm × 20cm × 5cm. Conditioning data have been extracted from the hydrofacies maps of two crossing quarry faces. (3) The connectivity of the four simulated hydrofacies has been quantified with total and intrinsic indicators: the former measures the degree of connection within the entire volume, whereas the latter measures the degree of connection of a facies within itself and is therefore less dependent on the proportion of the facies in the total volume. (4) Finite-difference modeling of groundwater flow has been applied to compute the equivalent hydraulic-conductivity tensor. (5) Numerical experiments of convective transport of non-reactive solutes have been performed, in order to map the preferential flow paths and to compute the dispersion tensor with a Lagrangian approach and the longitudinal dispersion with an Eulerian approach. The results show that a multidisciplinary approach permits to reproduce the heterogeneity of this aquifer analogue, so that the results (strength and weaknesses of different geostatistical simulation methods, relationship of connectivity indicators with flow and transport parameters, etc.) obtained for this case study can be generalized to aquifers characterized by similar geological situations.

Site 765: Sedimentology

USGS Publications Warehouse

,

1990-01-01

Various techniques were used to decipher the sedimentation history of Site 765, including Markov chain analysis of facies transitions, XRD analysis of clay and other minerals, and multivariate analysis of smear-slide data, in addition to the standard descriptive procedures employed by the shipboard sedimentologist. This chapter presents brief summaries of methodology and major findings of these three techniques, a summary of the sedimentation history, and a discussion of trends in sedimentation through time.

Field-trip guide to subaqueous volcaniclastic facies in the Ancestral Cascades arc in southern Washington State—The Ohanapecosh Formation and Wildcat Creek beds

USGS Publications Warehouse

Jutzeler, Martin; McPhie, Jocelyn

2017-06-27

Partly situated in the idyllic Mount Rainier National Park, this field trip visits exceptional examples of Oligocene subaqueous volcaniclastic successions in continental basins adjacent to the Ancestral Cascades arc. The >800-m-thick Ohanapecosh Formation (32–26 Ma) and the >300-m-thick Wildcat Creek (27 Ma) beds record similar sedimentation processes from various volcanic sources. Both show evidence of below-wave-base deposition, and voluminous accumulation of volcaniclastic facies from subaqueous density currents and suspension settling. Eruption-fed facies include deposits from pyroclastic flows that crossed the shoreline, from tephra fallout over water, and from probable Surtseyan eruptions, whereas re-sedimented facies comprise subaqueous density currents and debris flow deposits.

Lithostratigraphy and microfacies analyses of the Lateglacial and early Holocene sediment record from Lake Haemelsee (Germany)

NASA Astrophysics Data System (ADS)

Haliuc, Aritina; Brauer, Achim; Dulski, Peter; Engels, Stefan; Lane, Christine

2015-04-01

Annually laminated sediments are unique continental archives holding essential paleoenvironmental and paleoclimatic information providing the opportunity (i) to evaluate the climate variability at inter-annual to decadal scale and (ii) to construct independent and reliable chronologies. Lake Haemelsee in northern Germany (19.5 m a.s.l) is a key site for tracing high-resolution climatic and environmental evolution in W Europe because of its partly varved sediments. Here, we apply lithostratigraphical, geochemical and micro-facies analyses for the bottom sediments (~1700 to 1300 cm sediment depth) in order to investigate the driving mechanisms, timing and amplitude of Lateglacial abrupt climate changes to the onset of the Holocene warming. Detailed investigation includes micro-facies analyses on petrographic thin sections combined with high-resolution µ-XRF element scanning on both fresh sediment core halves (200 µm resolution) and impregnated sediment blocks (50µm resolution). Based on these analyses, the sediment composite profile (378 cm) has been divided in ten lithozones, each exhibiting different sedimentation modes in response to regional and local climatic and environmental changes. Micro-facies analyses revealed that sediments consist of organic matter, siderite, calcite, clay/silt and sand. The basal sediments consist of glacio-fluvial material. Fine laminations are best preserved in lithozone 5 (1522-1573 cm), where minima in element proxies for detrital sediments (Ti, K, Si) and maxima in Fe and Mn indicate the prevalence of anoxic meromictic conditions. Three different varve facies types were distinguished: i) the clastic-organic varves are specific for the intervals 1571-1573 cm and 1536-1541 cm; ii) calcite/siderite-organic varves appear between 1568-1571 and 1541-1545 cm; iii) the siderite-organic varves are characteristic for the middle of the lithozone 5 spanning from 1545-1568 cm. These changes in varve facies reflect the complex answer of sedimentary conditions to climatic changes during Allerød and Allerød/Younger Dryas transition. An increased detrital sediment flux characterizes lithozone 6 and, most probably reflects the Younger Dryas cold interval. This interpretation is supported by the late Allerød Laacher See Tephra, an important chronostratigraphic marker horizon to link the floating 625 varve year chronology for the Allerød interstadial to an absolute time scale. Also, the preliminary pollen data provided the biostratigraphical information for establishing the lateglacial boundaries. Poorly preserved organic laminas are characteristic for lithozone 7 (1445-1474 cm). Our preliminary results demonstrate that the lake system responded sensitively to rapid and short-term climatic changes and these responses are well-expressed in sedimentological and geochemical variability.

Fluid heterogeneity during granulite facies metamorphism in the Adirondacks: stable isotope evidence

USGS Publications Warehouse

Valley, J.W.; O'Neil, J.R.

1984-01-01

The preservation of premetamorphic, whole-rock oxygen isotope ratios in Adirondack metasediments shows that neither these rocks nor adjacent anorthosites and gneisses have been penetrated by large amounts of externally derived, hot CO2-H2O fluids during granulite facies metamorphism. This conclusion is supported by calculations of the effect of fluid volatilization and exchange and is also independently supported by petrologic and phase equilibria considerations. The data suggest that these rocks were not an open system during metamorphism; that fluid/rock ratios were in many instances between 0.0 and 0.1; that externally derived fluids, as well as fluids derived by metamorphic volatilization, rose along localized channels and were not pervasive; and thus that no single generalization can be applied to metamorphic fluid conditions in the Adirondacks. Analyses of 3 to 4 coexisting minerals from Adirondack marbles show that isotopic equilibrium was attained at the peak of granulite and upper amphibolite facies metamorphism. Thus the isotopic compositions of metamorphic fluids can be inferred from analyses of carbonates and fluid budgets can be constructed. Carbonates from the granulite facies are on average, isotopically similar to those from lower grade or unmetamorphosed limestones of the same age showing that no large isotopic shifts accompanied high grade metamorphism. Equilibrium calculations indicate that small decreases in ??18O, averaging 1 permil, result from volatilization reactions for Adirondack rock compositions. Additional small differences between amphibolite and granulite facies marbles are due to systematic lithologie differences. The range of Adirondack carbonate ??18O values (12.3 to 27.2) can be explained by the highly variable isotopic compositions of unmetamorphosed limestones in conjunction with minor 18O and 13C depletions caused by metamorphic volatilization suggesting that many (and possibly most) marbles have closely preserved their premetamorphic isotopic compositions. Such preservation is particularly evident in instances of high ??18O calcites (25.0 to 27.2), low ??18O wollastonites (-1.3 to 3.5), and sharp gradients in ??18O (18 permil/15m between marble and anorthosite, 8 permil/25 m in metasediments, and 6 permil/1 m in skarn). Isotopic exchange is seen across marble-anorthosite and marble-granite contacts only at the scale of a few meters. Small (<5 m) marble xenoliths are in approximate exchange equilibrium with their hosts, but for larger xenoliths and layers of marble there is no evidence of exchange at distances greater than 10 m from meta-igneous contacts. ?? 1984 Springer-Verlag.

Neogene evolution of northern Mahakam Delta, East Kalimantan, Indonesia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armin, R.A.; Abdoerrias, R.; Boer, W.D. de

1996-01-01

A regional sequence-stratigraphic study of the lower Kutei basin, embracing present coastal and offshore East Kalimantan, was undertaken to decipher the Neogene history of an important oil-producing province. The chronostratigraphic framework developed during this study was applied to facies analyses, organic geochemistry, and 2-D basin modeling. Integration of these disciplines powerfully illuminated the relationships between structuring, sedimentation, and hydrocarbon migration, Sedimentation in the lower Kutei basin since the late Middle Miocene has been dominated by the tidal-fluvial Mahakam delta system. During this time the principal river transport system has remained in about the same location as the present-day Mahakam River.more » Thick successions of monotonously similar deltaic facies were stacked vertically, punctuated by progradational or backstepping (flooding) units. Middle to Upper Miocene shelf edges of the delta platform, which are commonly sites of carbonate buildups, offlap from west to east towards the present-day shelf edge. Growth faults active during ca. 12-9 Ma are clustered just basinward of a prominent aggradational Middle Miocene shelf margin, and they exerted profound control on facies distribution. Tectonic quiescence prevailed during ca. 9-4 Ma, and in this period widespread regressive deltaic deposition over a broad, stable delta platform created the most important reservoirs. Subsequently, during Late Pliocene and younger time, many early growth faults were reactivated, and new faults also formed eastward toward the present shelf margin. Here, economically significant intervals consist mainly of lowstand deposits that accumulated in shelf-margin half-grabens created by these Plio-Pleistocene faults.« less

Neogene evolution of northern Mahakam Delta, East Kalimantan, Indonesia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armin, R.A.; Abdoerrias, R.; Boer, W.D. de

1996-12-31

A regional sequence-stratigraphic study of the lower Kutei basin, embracing present coastal and offshore East Kalimantan, was undertaken to decipher the Neogene history of an important oil-producing province. The chronostratigraphic framework developed during this study was applied to facies analyses, organic geochemistry, and 2-D basin modeling. Integration of these disciplines powerfully illuminated the relationships between structuring, sedimentation, and hydrocarbon migration, Sedimentation in the lower Kutei basin since the late Middle Miocene has been dominated by the tidal-fluvial Mahakam delta system. During this time the principal river transport system has remained in about the same location as the present-day Mahakam River.more » Thick successions of monotonously similar deltaic facies were stacked vertically, punctuated by progradational or backstepping (flooding) units. Middle to Upper Miocene shelf edges of the delta platform, which are commonly sites of carbonate buildups, offlap from west to east towards the present-day shelf edge. Growth faults active during ca. 12-9 Ma are clustered just basinward of a prominent aggradational Middle Miocene shelf margin, and they exerted profound control on facies distribution. Tectonic quiescence prevailed during ca. 9-4 Ma, and in this period widespread regressive deltaic deposition over a broad, stable delta platform created the most important reservoirs. Subsequently, during Late Pliocene and younger time, many early growth faults were reactivated, and new faults also formed eastward toward the present shelf margin. Here, economically significant intervals consist mainly of lowstand deposits that accumulated in shelf-margin half-grabens created by these Plio-Pleistocene faults.« less

Depositional facies and aqueous-solid geochemistry of travertine-depositing hot springs (Angel Terrace, Mammoth Hot Springs, Yellowstone National Park, U.S.A.)

NASA Technical Reports Server (NTRS)

Fouke, B. W.; Farmer, J. D.; Des Marais, D. J.; Pratt, L.; Sturchio, N. C.; Burns, P. C.; Discipulo, M. K.

2000-01-01

Petrographic and geochemical analyses of travertine-depositing hot springs at Angel Terrace, Mammoth Hot Springs, Yellowstone National Park, have been used to define five depositional facies along the spring drainage system. Spring waters are expelled in the vent facies at 71 to 73 degrees C and precipitate mounded travertine composed of aragonite needle botryoids. The apron and channel facies (43-72 degrees C) is floored by hollow tubes composed of aragonite needle botryoids that encrust sulfide-oxidizing Aquificales bacteria. The travertine of the pond facies (30-62 degrees C) varies in composition from aragonite needle shrubs formed at higher temperatures to ridged networks of calcite and aragonite at lower temperatures. Calcite "ice sheets", calcified bubbles, and aggregates of aragonite needles ("fuzzy dumbbells") precipitate at the air-water interface and settle to pond floors. The proximal-slope facies (28-54 degrees C), which forms the margins of terracette pools, is composed of arcuate aragonite needle shrubs that create small microterracettes on the steep slope face. Finally, the distal-slope facies (28-30 degrees C) is composed of calcite spherules and calcite "feather" crystals. Despite the presence of abundant microbial mat communities and their observed role in providing substrates for mineralization, the compositions of spring-water and travertine predominantly reflect abiotic physical and chemical processes. Vigorous CO2 degassing causes a +2 unit increase in spring water pH, as well as Rayleigh-type covariations between the concentration of dissolved inorganic carbon and corresponding delta 13C. Travertine delta 13C and delta 18O are nearly equivalent to aragonite and calcite equilibrium values calculated from spring water in the higher-temperature (approximately 50-73 degrees C) depositional facies. Conversely, travertine precipitating in the lower-temperature (< approximately 50 degrees C) depositional facies exhibits delta 13C and delta 18O values that are as much as 4% less than predicted equilibrium values. This isotopic shift may record microbial respiration as well as downstream transport of travertine crystals. Despite the production of H2S and the abundance of sulfide oxidizing microbes, preliminary delta 34S data do not uniquely define the microbial metabolic pathways present in the spring system. This suggests that the high extent of CO2 degassing and large open-system solute reservoir in these thermal systems overwhelm biological controls on travertine crystal chemistry.

Guidebook to the Gaudalupian symposium

USGS Publications Warehouse

Rohr, D.M.; Wardlaw, B.R.; Rudine, S.F.; Haneef, Mohammad; Hall, A.J.; Grant, R.E.

2000-01-01

Compared to the Guadalupe Mountains of Texas and New Mexico the depositional environments of the Permian strata of the Glass Mountains (and adjacent Del Norte Mountains) are less well known. In general, the Guadalupian facies in the the Glass and Del Norte mountains changes from predominantly carbonate facies in the northeast to thicker clastic facies in the southwest. Philip B. Kind (1931) originally considered this trend to reflect an uplifted clastic source to the southwest, with carbonate facies developing away from the source area. Ross (1986) interpreted the eastern portion of the Road Canyon and Word formations to consist the shelf, shelf-edge bioherm, and reef facies, and the southwest area to consist of deeper water siliceous shale, clastic limestone, and basinal sandstone facies. Probably the best known controversy in the Glass Mountains involves the depositional environment of the Skinner Ranch Formation (Leonardian according to Ross, 1986; Wolfcampian according to Cooper and Grant, 1972) at its type section on Leonard Mountain. Cooper and Grant (1964) identified in situ patch reefs at the base of the section, which were subsequently interpreted as displaced limestone blocks deposited in a slope environment (Rogers, 1972; Cys and Mazzullo, 1978; Ross, 1986). Later Flores, McMillan, and Watters (1977) interpreted the same units as subtidal and intertidal deposits. The Skinner Ranch Formation illustrates the complexities involved in interpreting the paleogeography of the Glass Mountains. If the Sinner Ranch contains displaced blocks, some eroded from older units, it explains the occurrence of Wolfcampian fossils in the Skinner Ranch (Ross, 1986).The slop facies interpretation also is used to place the shelf edge at that time between Skinner Ranch outcrops at Leonard Mountain and the lagoonal, backreef deposits of the Hess Formation to the east, although most of the actual shelf edge is not preserved (Ross, 1987:30). Similar conflicting interpretations exist in younger rocks in the western facies of the Leonardian Guadalupian to the southwest in the Del Norte Mountains. Ross (1986, 1987) considered the western facies of the Road Canyon and Word formations to be basinal shales and turbidites. Wardlaw et al. (1990) and Rohr et al. (1987) have interpreted this area to be shallow intertidal to lagoonal environments adjacent to an uplifted area to the south. The type section of the Road Canyon Formation is also a subject of disagreement and will be discusses in more detail later.

Sand ridges off Sarasota, Florida: A complex facies boundary on a low-energy inner shelf environment

USGS Publications Warehouse

Twichell, D.; Brooks, Gillian L.; Gelfenbaum, G.; Paskevich, V.; Donahue, Brian

2003-01-01

The innermost shelf off Sarasota, Florida was mapped using sidescan-sonar imagery, seismic-reflection profiles, surface sediment samples, and short cores to define the transition between an onshore siliciclastic sand province and an offshore carbonate province and to identify the processes controlling the distribution of these distinctive facies. The transition between these facies is abrupt and closely tied to the morphology of the inner shelf. A series of low-relief nearly shore-normal ridges characterize the inner shelf. Stratigraphically, the ridges are separated from the underlying Pleistocene and Tertiary carbonate strata by the Holocene ravinement surface. While surficial sediment is fine to very-fine siliciclastic sand on the southeastern sides of the ridges and shell hash covers their northwestern sides, the cores of these Holocene deposits are a mixture of both of these facies. Along the southeastern edges of the ridges the facies boundary coincides with the discontinuity that separates the ridge deposits from the underlying strata. The transition from siliciclastic to carbonate sediment on the northwestern sides of the ridges is equally abrupt, but it falls along the crests of the ridges rather than at their edges. Here the facies transition lies within the Holocene deposit, and appears to be the result of sediment reworking by modern processes. This facies distribution primarily appears to result from south-flowing currents generated during winter storms that winnow the fine siliciclastic sediment from the troughs and steeper northwestern sides of the ridges. A coarse shell lag is left armoring the steeper northwestern sides of the ridges, and the fine sediment is deposited on the gentler southeastern sides of the ridges. This pronounced partitioning of the surficial sediment appears to be the result of the siliciclastic sand being winnowed and transported by these currents while the carbonate shell hash falls below the threshold of sediment movement and is left as a lag. The resulting facies boundaries on this low-energy, sediment-starved inner continental shelf are of two origins which both are tied to the remarkably subtle ridge morphology. Along the southeastern sides of the ridges the facies boundary coincides with a stratigraphic discontinuity that separates Holocene from the older deposits while the transition along the northwestern sides of the ridges is within the Holocene deposit and is the result of sediment redistribution by modern processes. ?? 2003 Elsevier B.V. All rights reserved.

Depositional facies and aqueous-solid geochemistry of travertine-depositing hot springs (Angel Terrace, Mammoth Hot Springs, Yellowstone National Park, U.S.A.).

PubMed

Fouke, B W; Farmer, J D; Des Marais, D J; Pratt, L; Sturchio, N C; Burns, P C; Discipulo, M K

2000-05-01

Petrographic and geochemical analyses of travertine-depositing hot springs at Angel Terrace, Mammoth Hot Springs, Yellowstone National Park, have been used to define five depositional facies along the spring drainage system. Spring waters are expelled in the vent facies at 71 to 73 degrees C and precipitate mounded travertine composed of aragonite needle botryoids. The apron and channel facies (43-72 degrees C) is floored by hollow tubes composed of aragonite needle botryoids that encrust sulfide-oxidizing Aquificales bacteria. The travertine of the pond facies (30-62 degrees C) varies in composition from aragonite needle shrubs formed at higher temperatures to ridged networks of calcite and aragonite at lower temperatures. Calcite "ice sheets", calcified bubbles, and aggregates of aragonite needles ("fuzzy dumbbells") precipitate at the air-water interface and settle to pond floors. The proximal-slope facies (28-54 degrees C), which forms the margins of terracette pools, is composed of arcuate aragonite needle shrubs that create small microterracettes on the steep slope face. Finally, the distal-slope facies (28-30 degrees C) is composed of calcite spherules and calcite "feather" crystals. Despite the presence of abundant microbial mat communities and their observed role in providing substrates for mineralization, the compositions of spring-water and travertine predominantly reflect abiotic physical and chemical processes. Vigorous CO2 degassing causes a +2 unit increase in spring water pH, as well as Rayleigh-type covariations between the concentration of dissolved inorganic carbon and corresponding delta 13C. Travertine delta 13C and delta 18O are nearly equivalent to aragonite and calcite equilibrium values calculated from spring water in the higher-temperature (approximately 50-73 degrees C) depositional facies. Conversely, travertine precipitating in the lower-temperature (< approximately 50 degrees C) depositional facies exhibits delta 13C and delta 18O values that are as much as 4% less than predicted equilibrium values. This isotopic shift may record microbial respiration as well as downstream transport of travertine crystals. Despite the production of H2S and the abundance of sulfide oxidizing microbes, preliminary delta 34S data do not uniquely define the microbial metabolic pathways present in the spring system. This suggests that the high extent of CO2 degassing and large open-system solute reservoir in these thermal systems overwhelm biological controls on travertine crystal chemistry.

Epiphytic calcium carbonate production and facies development within sub-tropical seagrass beds, Inhaca Island, Mozambique

NASA Astrophysics Data System (ADS)

Perry, C. T.; Beavington-Penney, S. J.

2005-02-01

Seagrass beds have been widely recognised as playing an important role in influencing carbonate sediment facies development. This reflects their role not only as facilitators of fine sediment settling and stabilisation, but also as substrates for epiphytic organisms that, after death, contribute skeletal carbonate to the sediment substrate. In low latitude (reef-related) settings, epiphytic carbonate production rates are often high and this, in combination with the trapping of carbonate mud produced by a range of associated calcareous algal species, typically results in the development of carbonate mud-rich facies. Whilst such environments, and their associated sediment substrates, have been widely documented, studies of seagrass facies in marginal (sub-tropical/warm temperate) marine settings have not been conducted from a sedimentological perspective. This study determines rates of epiphytic carbonate production on two seagrass species Thalassodendron ciliatum and Thalassia hemprichii, and examines seagrass sediment facies from a sub-tropical reef-related environment in southern Mozambique. Dense seagrass beds colonise primarily siliciclastic sediment substrates and are characterised by low rates of epiphytic carbonate production (mean: 43.9 g CaCO 3 m -2 year -1 for T. ciliatum, and 33.4 g CaCO 3 m -2 year -1 for T. hemprichii). Epiphytic encrusters are dominated by thin, monostromatic layers of the crustose coralline red algae Hydrolithon farinosum, along with rotaliid smaller benthic foraminifera (including Asterorotalia cf. gaimardi and Spirillina sp.) and the soritid Peneroplis sp., as well as rare encrusting acervulinid foraminifera, serpulids and bryozoans. Epiphytic calcium carbonate production rates are therefore low and this is reflected in the low (<15%) carbonate content of the seagrass sediments, as well as the low (<1%) sediment fine (<63 μm size fraction) content. This study suggests that mud-rich sediment facies do not necessarily develop in conjunction with seagrass beds and that mud-poor facies may develop in some seagrass-colonised environments. At these sites (sub-tropical and siliciclastic-sediment dominated) this is suggested to reflect both the low levels of epiphytic and benthic algal carbonate mud production as well as a net outflux of fine-grained sediment due to tidal current-induced sediment resuspension. In keeping with carbonate facies generally there are thus likely to be latitude and environment-related shifts in the composition and character of seagrass related sediment facies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosen, M.R.; Collins, L.B.; Wyrwoll, K.H.

The Houtman Abrolhos reefs are located 80 km off the west coast of Australia between latitudes 28 and 29{degree} south. The islands are situated on three Pleistocene carbonate reef platforms which rise above the surrounding shelf. The modern coral reefs are close to the geographic limit for coral growth in the southern hemisphere and survive due to the presence of the Leeuwin current (a poleward-flowing warm stream). Two major shallow-water benthic communities coexist in the Abrolhos: a macroalgal-dominated community on the windward platform margins and a coral-dominated community on the leeward margins. These communities overlap-particularly in the platform lagoons, wheremore » competition between macroalgae and corals is intense. This interaction has been suggested as a major factor controlling the growth of cord reefs at high latitudes. The Holocene carbonate sediments lack nonskeletal components and are dominated by coral and coralline algal fragments with subordinate molluskan and echinoderm debris. The accumulations can be grouped into the following major facies: (1) coral framestone and coralline algal/serpulid boundstone, (2) submarine sand sheets, (3) subaerial coral storm ridges, (4-) peritidal to subtidal shingle and rubble veneers composed of dominantly coral debris, and (5) eolian dunes and beach sand. The Holocene sediment is a thin (< 2 m) veneer on the Pleistocene reef platform, which is emergent as small islands. The Pleistocene platform is composed of reef facies that can be directly related to the Holocene sediments. The platform is composed of framestone and boundstone facies (corals and coralline algal/serpulid facies), rudstones (submarine coral rubble facies), planar-bedded skeletal grainstones dipping 12-13{degree} (submarine sand sheet and peritidal shingle facies), and large 15-m-high eolianite dunes (eolian dune facies).« less

Microfacies and depositional environments of the Late Ordovician Lianglitage Formation at the Tazhong Uplift in the Tarim Basin of Northwest China

NASA Astrophysics Data System (ADS)

Gao, Da; Lin, Changsong; Yang, Haijun; Zuo, Fanfan; Cai, Zhenzhong; Zhang, Lijuan; Liu, Jingyan; Li, Hong

2014-04-01

The Late Ordovician Lianglitage Formation comprises 13 microfacies (Mf1-Mf13) that were deposited on a carbonate platform at the Tazhong Uplift of the Tarim Basin in Northwest China. Each type of microfacies indicates a specific depositional environment with a certain level of wave energy. Four primary groups of microfacies associations (MA1-MA4) were determined. These associations represent different depositional facies, including reef-shoal facies in the platform margin (MA1), carbonate sand shoal facies (MA2) and oncoid shoal (MA3) on open platforms, and lagoon and tidal flat facies (MA4) in the platform interior. Each microfacies association was generated in a fourth-order sedimentary sequence developing within third-order sequences (SQ1, SQ2, and SQ3, from bottom to top), showing a shallowing-upward trend. High-frequency sequences and facies correlation between wells suggests that the reef-shoal facies more successively developed in the southeastern part of the platform margin, and high-energy microfacies were more strictly confined by the top boundary of fourth-order sequences in the northwestern part of the platform. The highstand systems tract (HST) of the SQ2 is characterized by reef-shoals that developed along the platform margin and tidal flats and lagoons that developed in the platform interior, while the SQ3 is characterized by the oncoid shoal facies that generally developed on the uplift due to a regionally extensive transgression that occurred during the latter part of the Late Ordovician. The results of this study can be used for investigating the development and distribution of potential reservoirs; the reservoirs in southeastern part of the platform margin may be of premium quality because the high-energy microfacies were best preserved there.

Barrier island facies models and recognition criteria

NASA Astrophysics Data System (ADS)

Mulhern, J.; Johnson, C. L.

2017-12-01

Barrier island outcrops record transgressive shoreline motion at geologic timescales, providing integral clues to understanding how coastlines respond to rising sea levels. However, barrier island deposits are difficult to recognize. While significant progress has been made in understanding the modern coastal morphodynamics, this insight is not fully leveraged in existing barrier island facies models. Excellent outcrop exposures of the paralic Upper Cretaceous Straight Cliffs Formation of southern Utah provide an opportunity to revise facies models and recognition criteria for barrier island deposits. Preserved barrier islands are composed of three main architectural elements (shorefaces, tidal inlets, and tidal channels) which occur independently or in combination to create larger-scale barrier island deposits. Barrier island shorefaces record progradation, while barrier island tidal inlets record lateral migration, and barrier island tidal channels record aggradation within the tidal inlet. Four facies associations are used to describe and characterize these barrier island architectural elements. Barrier islands occur in association with backarrier fill and internally contain lower and upper shoreface, high-energy upper shoreface, and tidal channel facies. Barrier islands bound lagoons or estuaries, and are distinguished from other shoreface deposits by their internal facies and geometry, association with backbarrier facies, and position within transgressive successions. Tidal processes, in particular tidal inlet migration and reworking of the upper shoreface, also distinguish barrier island deposits. Existing barrier island models highlight the short term heterogeneous and dynamic nature of barrier island systems, yet overlook processes tied to geologic time scales, such as multi-directional motion, erosion, and reworking, and their expressions in preserved barrier island strata. This study uses characteristic outcrop expressions of barrier island successions to exemplify how modern morphodynamic concepts can be combined with geologic time-scale processes to update understanding of ancient barrier island motion and preservation.

Nature and classification of waterlain glaciogenic sediments, exemplified by Pleistocene, Late Paleozoic and Late Precambrian deposits

NASA Astrophysics Data System (ADS)

Gravenor, C. P.; von Brunn, V.; Dreimanis, A.

1984-03-01

This study of waterlain glaciogenic sediments is designed to present both a review and new information on glaciogenic subaquatic deposits of differing age in a number of localities in North and South America and South Africa. The Late Paleozoic glaciogenic deposits of the ParanáBasin in Brazil and the Karoo Basin of South Africa are singled out for special attention as they show a reasonably complete lateral sequence of terrestrial to off-shore glaciogenic sedimentation. Although the environment of subaquatic glaciogenic sedimentation varies from one area to the next, certain common elements are found which can be used to develop a generalized model for both glaciomarine and glaciolacustrine sedimentation. For descriptive purposes, the model is divided into two broad categories: a shelf facies and a basinal facies. The shelf facies is marked by massive diamicton(ite) which may be 200 m or more in thickness and which is frequently overlain by a complex of clastic sediments consisting primarily of gravity and fluid flows. The basinal facies is marked by products of subaquatic slumps and more distal turbidites and glaciomarine sediments. New terminology is introduced. The massive diamicton(ite), which is diagnostic of the shelf facies, probably represents deposition from the base of active ice in a subaquatic environment and is termed undermelt diamicton(ite). The gravity and fluid flows which are usually found overlying undermelt diamicton(ite) and in the basinal facies are subdivided into six categories: glaciogenic subaquatic outwash, glaciogenic suspension flow, glaciogenic chaotic debris flow, glaciogenic subaquatic debris flow, glaciogenic slurry flow and glaciogenic turbidity flow. The relative abundance of undermelt diamicton(ite) and the various types of gravity and fluid flows can be used to define inner shelf, outer shelf, inner basin and outer basin facies of glaciomarine sedimentation.

Early rifting deposition: examples from carbonate sequences of Sardinia (Cambrian) and Tuscany (Triassic-Jurassic), Italy: an analogous tectono-sedimentary and climatic context

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cocozza, T.; Gandin, A.

Lower Cambrian Ceroide Limestone (Sardinia) and Lower Jurassic Massiccio Limestone (Tuscany) belong to sequences deposited in analogous tectono-sedimentary context: the former linked to the Caledonian Sardic Phase, the latter to the Alpine Orogeny. Both units consist of massive pure limestone characterized by marginal and lagoonal sequences repeatedly interfingering in the same geological structure. This distribution indicates a morphology of the platforms composed of banks (marginal facies) and shallow basins (lagoonal facies) comparable with a Bahamian complex. Dolomitization affects patchily the massive limestone bodies, and karstic features, breccias, and sedimentary dikes occur at their upper boundary. Both units overlie early dolomitemore » and evaporites (sabkha facies) containing siliciclastic intercalations in their lower and/or upper part and are unconformably covered by open-shelf red (hematitic), nodular limestone Ammonitico Rosso facies). The sedimentary evolution of the two sequences appears to have been controlled by synsedimentary tectonics whose major effects are the end of the terrigenous input, the bank-and-basin morphology of the platform, the irregular distribution of the dolomitization, and the nodular fabric of the overlying facies. The end of the Bahamian-type system is marked by the karstification of the emerged blocks and is followed by their differential sinking and burial under red-nodular facies. From a geodynamic viewpoint, sequences composed of Bahamian-like platform carbonates followed by Ammonitico Rosso facies imply deposition along continental margins subjected to block-faulting during an extensional regime connected with the beginning of continental rifting. Moreover, the variation from sabkha to Bahamian conditions suggests the drifting of the continent from arid to humid, tropical areas.« less

Multiscale approach to (micro)porosity quantification in continental spring carbonate facies: Case study from the Cakmak quarry (Denizli, Turkey)

NASA Astrophysics Data System (ADS)

De Boever, Eva; Foubert, Anneleen; Oligschlaeger, Dirk; Claes, Steven; Soete, Jeroen; Bertier, Pieter; Özkul, Mehmet; Virgone, Aurélien; Swennen, Rudy

2016-07-01

Carbonate spring deposits gained renewed interest as potential contributors to subsurface reservoirs and as continental archives of environmental changes. In contrast to their fabrics, petrophysical characteristics - and especially the importance of microporosity (< 1µm) - are less understood. This study presents the combination of advanced petrophysical and imaging techniques to investigate the pore network characteristics of three, common and widespread spring carbonate facies, as exposed in the Pleistocene Cakmak quarry (Denizli, Turkey): the extended Pond, the dipping crystalline Proximal Slope Facies and the draping Apron and Channel Facies deposits formed by encrustation of biological substrate. Integrating mercury injection capillary pressure, bulk and diffusion Nuclear Magnetic Resonance (NMR), NMR profiling and Brunauer-Emmett-Teller (BET) measurements with microscopy and micro-computer tomography (µ-CT), shows that NMR T2 distributions systematically display a single group of micro-sized pore bodies, making up between 6 and 33% of the pore space (average NMR T2 cut-off value: 62 ms). Micropore bodies are systematically located within cloudy crystal cores of granular and dendritic crystal textures in all facies. The investigated properties therefore do not reveal differences in micropore size or shape with respect to more or less biology-associated facies. The pore network of the travertine facies is distinctive in terms of (i) the percentage of microporosity, (ii) the connectivity of micropores with meso- to macropores, and (ii) the degree of heterogeneity at micro- and macroscale. Results show that an approach involving different NMR experiments provided the most complete view on the 3-D pore network especially when microporosity and connectivity are of interest.

Retrogressive failures recorded in mass transport deposits in the Ursa Basin, Northern Gulf of Mexico

NASA Astrophysics Data System (ADS)

Sawyer, Derek E.; Flemings, Peter B.; Dugan, Brandon; Germaine, John T.

2009-10-01

Clay-rich mass transport deposits (MTDs) in the Ursa Basin, Gulf of Mexico, record failures that mobilized along extensional failure planes and transformed into long runout flows. Failure proceeded retrogressively: scarp formation unloaded adjacent sediment causing extensional failure that drove successive scarp formation updip. This model is developed from three-dimensional seismic reflection data, core and log data from Integrated Ocean Drilling Project (IODP) Expedition 308, and triaxial shear experiments. MTDs are imaged seismically as low-amplitude zones above continuous, grooved, high-amplitude basal reflections and are characterized by two seismic facies. A Chaotic facies typifies the downdip interior, and a Discontinuous Stratified facies typifies the headwalls/sidewalls. The Chaotic facies contains discontinuous, high-amplitude reflections that correspond to flow-like features in amplitude maps: it has higher bulk density, resistivity, and shear strength, than bounding sediment. In contrast, the Discontinuous Stratified facies contains relatively dim reflections that abut against intact pinnacles of parallel-stratified reflections: it has only slightly higher bulk density, resistivity, and shear strength than bounding sediment, and deformation is limited. In both facies, densification is greatest at the base, resulting in a strong basal reflection. Undrained shear tests document strain weakening (sensitivity = 3). We estimate that failure at 30 meters below seafloor will occur when overpressure = 70% of the hydrostatic effective stress: under these conditions soil will liquefy and result in long runout flows.

Molecular and bulk isotopic analyses of organic matter in marls of the Mulhouse Basin (Tertiary, Alsace, France)

NASA Technical Reports Server (NTRS)

Hollander, D. J.; Sinninghe Damste, J. S.; Hayes, J. M.; de Leeuw, J. W.; Huc, A. Y.

1993-01-01

Contents of 13C in kerogens and carbonates in 21 samples from a core of the MAX borehole, Mulhouse Evaporite Basin, range from -27.3 to -23.5 and -3.7 to -1.8% vs PDB, respectively. Organic nitrogen in the same samples is enriched in 15N relative to atmospheric N2 by 12.2-15.7%. Hydrogen indices and delta values for kerogens vary systematically with facies, averaging 493 mg HC/g Corg and -25.7% in the most saline facies (dominated by inputs from aquatic sources) and 267 mg HC/g Corg and -23.7% in the least saline facies (50/50 aquatic/terrigenous). Values of delta were measured for individual aliphatic hydrocarbons from three samples representing three different organic facies. For all samples, terrigenous inputs were unusually rich in 13C, the estimated delta value for bulk terrigenous debris, apparently derived partly from CAM plants, being -22.5%. In the most saline facies, isotopic evidence indicates the mixing of 13C-depleted products of photosynthetic bacteria with 13C-enriched products of halotolerant eukaryotic algae. At lower salinities, a change in the producer community is marked by a decrease in the 13C content of algal lipids. The content of 13C in algal lipids increases in the least saline facies, due either to succession of different organisms or to decreased concentrations of dissolved CO2.

Development of a carbonate platform with potential for large discoveries - an example from Vietnam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayall, M.; Bent, A.; Dale, B.

1996-01-01

In offshore central and southern Vietnam a number of carbonate accumulations can be recognized. Platform carbonates form basin-wide units of carbonate characterized by strong, continuous parallel seismic reflectors. Facies are dominated by bioclastic wackestones with poor-moderate reservoir quality. On the more isolated highs, large buildups developed. These are typically 5-10 km across and 300 m thick. They unconformably overlie the platform carbonate facies which are extensively karstified. In places these are pinnacles, typically 2-5 km across, 300 m+ thick with chaotic or mounded internal seismic facies. The large carbonate buildups are characterized by steep sided slopes with talus cones, reef-marginmore » rims usually developed around only part of the buildup, and a prominent back-stepping geometry. Buildup interior facies form the main potential reservoirs They are dominated by fine to coarse grained coralgal packstones. Fine grained carbonates are associated with deeper water events and multiple karst surfaces can also be identified. Reservoir quality is excellent, largely controlled by extensive dissolution and dolomitization believed to be related to the exposure events. Gas has been found in a number of reservoirs. Heterogeneities can be recognized which could potentially effect production. These include the extensive finer grained facies, cementation or open fissures associated with the karst surfaces, a more cemented reef rim, shallowing upwards facies cycles and faults.« less

Development of a carbonate platform with potential for large discoveries - an example from Vietnam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayall, M.; Bent, A.; Dale, B.

1996-12-31

In offshore central and southern Vietnam a number of carbonate accumulations can be recognized. Platform carbonates form basin-wide units of carbonate characterized by strong, continuous parallel seismic reflectors. Facies are dominated by bioclastic wackestones with poor-moderate reservoir quality. On the more isolated highs, large buildups developed. These are typically 5-10 km across and 300 m thick. They unconformably overlie the platform carbonate facies which are extensively karstified. In places these are pinnacles, typically 2-5 km across, 300 m+ thick with chaotic or mounded internal seismic facies. The large carbonate buildups are characterized by steep sided slopes with talus cones, reef-marginmore » rims usually developed around only part of the buildup, and a prominent back-stepping geometry. Buildup interior facies form the main potential reservoirs They are dominated by fine to coarse grained coralgal packstones. Fine grained carbonates are associated with deeper water events and multiple karst surfaces can also be identified. Reservoir quality is excellent, largely controlled by extensive dissolution and dolomitization believed to be related to the exposure events. Gas has been found in a number of reservoirs. Heterogeneities can be recognized which could potentially effect production. These include the extensive finer grained facies, cementation or open fissures associated with the karst surfaces, a more cemented reef rim, shallowing upwards facies cycles and faults.« less

Field-scale forward modelling of a shallow marine carbonate ramp: the Upper Jurassic Arab Formation (onshore Abu Dhabi - UAE)

NASA Astrophysics Data System (ADS)

Marchionda, Elisabetta; Deschamps, Rémy; Nader, Fadi H.; Ceriani, Andrea; Di Giulio, Andrea; Lawrence, David; Morad, Daniel J.

2017-04-01

The stratigraphic record of a carbonate system is the result of the interplay of several local and global factors that control the physical and the biological responses within a basin. Conceptual models cannot be detailed enough to take into account all the processes that control the deposition of sediments. The evaluation of the key controlling parameters on the sedimentation can be investigated with the use of stratigraphic forward models, that permit dynamic and quantitative simulations of the sedimentary basin infill. This work focuses on an onshore Abu Dhabi field (UAE) and it aims to provide a complete picture of the stratigraphic evolution of Upper Jurassic Arab Formation (Fm.). In this study, we started with the definition of the field-scale conceptual depositional model of the Formation, resulting from facies and well log analysis based on five wells. The Arab Fm. could be defined as a shallow marine carbonate ramp, that ranges from outer ramp deposits to supratidal/evaporitic facies association (from bottom to top). With the reconstruction of the sequence stratigraphic pattern and several paleofacies maps, it was possible to suggest multiple directions of progradations at local scale. Then, a 3D forward modelling tool has been used to i) identify and quantify the controlling parameters on geometries and facies distribution of the Arab Fm.; ii) predict the stratigraphic architecture of the Arab Fm.; and iii) integrate and validate the conceptual model. Numerous constraints were set during the different simulations and sensitivity analyses were performed testing the carbonate production, eustatic oscillations and transport parameters. To verify the geological consistency the 3D forward modelling has been calibrated with the available control points (five wells) in terms of thickness and facies distribution.

The origin and paleoecologic significance of the trace fossil Asteriadtes in the Pennsylvanian of Kansas and Missouri

USGS Publications Warehouse

Mángano, M. Gabriela; Buatois, L.A.; West, R.R.; Maples, C.G.

1999-01-01

The trace fossil Asteriacites, recorded in Cambrian to Recent shallow- and deep-marine facie??s, is traditionally interpreted as the resting trace of asterozoans. Well-preserved specimens of A. lumbricalis are abundant in Pennsylvanian (Upper Carboniferous) shallow- and marginalmarine siliciclastic deposits of eastern Kansas and western Missouri. Detailed morphologic analysis of these specimens suggests that they record the activities of mobile epifaunal ophiuroids. Evidence of a brittle star (ophiuroid) producer rather than sea star (asteroid) is provided by (1) trace-fossil morphologic features reflecting the anatomy of the producer (e.g., well-differentiated central structure, slender vermiform arms) and ophiuroid burrowing technique (e.g., proximal arm expansion, arm branching), and (2) mode of occurrence (e.g., gregarious behavior, horizontal and vertical repetition). Vertical and horizontal repetition produces complex aggregates of A. lumbricalis that are interpreted either as escape structures (fugichnia) or as feeding structures, respectively. Ophiura texturata is proposed.as a modern analogue for the A. lumbricalis producer, based on inferred life habit and feeding behavior. Asteriacites lumbricalis is present in two different intertidal trace-fossil assemblages. The first assemblage is characterized by high diversity and records tidal flats developed outside of embayments under normal marine conditions. The second assemblage consists of A. lumbricalis together with a few other ichnotaxa and represents a depauperate association that developed in restricted tidal flats within an embayment or estuarine setting. This challenges the conventional view of Asteriacites as a normal-marine salinity indicator. Some echinoderms, and particularly asterozoans, penetrate and inhabit modern environments of depressed salinity. The presence of Asteriacites in Pennsylvanian marginal-marine facie??s of Kansas and Missouri provides evidence that ophiuroids had adapted to brackish-water conditions by the late Paleozoic.

Eruption processes and deposit characteristics at the monogenetic Mt. Gambier Volcanic Complex, SE Australia: implications for alternating magmatic and phreatomagmatic activity

NASA Astrophysics Data System (ADS)

van Otterloo, Jozua; Cas, Raymond A. F.; Sheard, Malcolm J.

2013-08-01

The ˜5 ka Mt. Gambier Volcanic Complex in the Newer Volcanics Province, Australia is an extremely complex monogenetic, volcanic system that preserves at least 14 eruption points aligned along a fissure system. The complex stratigraphy can be subdivided into six main facies that record alternations between magmatic and phreatomagmatic eruption styles in a random manner. The facies are (1) coherent to vesicular fragmental alkali basalt (effusive/Hawaiian spatter and lava flows); (2) massive scoriaceous fine lapilli with coarse ash (Strombolian fallout); (3) bedded scoriaceous fine lapilli tuff (violent Strombolian fallout); (4) thin-medium bedded, undulating very fine lapilli in coarse ash (dry phreatomagmatic surge-modified fallout); (5) palagonite-altered, cross-bedded, medium lapilli to fine ash (wet phreatomagmatic base surges); and (6) massive, palagonite-altered, very poorly sorted tuff breccia and lapilli tuff (phreato-Vulcanian pyroclastic flows). Since most deposits are lithified, to quantify the grain size distributions (GSDs), image analysis was performed. The facies are distinct based on their GSDs and the fine ash to coarse+fine ash ratios. These provide insights into the fragmentation intensities and water-magma interaction efficiencies for each facies. The eruption chronology indicates a random spatial and temporal sequence of occurrence of eruption styles, except for a "magmatic horizon" of effusive activity occurring at both ends of the volcanic complex simultaneously. The eruption foci are located along NW-SE trending lineaments, indicating that the complex was fed by multiple dykes following the subsurface structures related to the Tartwaup Fault System. Possible factors causing vent migration along these dykes and changes in eruption styles include differences in magma ascent rates, viscosity, crystallinity, degassing and magma discharge rate, as well as hydrological parameters.

Study of Diagenetic Features in Rudist Buildups of Cretaceous Edwards Formation Using Ground Based Hyperspectral Scanning and Terrestrial LiDAR

NASA Astrophysics Data System (ADS)

Krupnik, D.; Khan, S.; Okyay, U.; Hartzell, P. J.; Biber, K.

2015-12-01

Ground based remote sensing is a novel technique for development of digital outcrop models which can be instrumental in performing detailed qualitative and quantitative sedimentological analysis for the study of depositional environment, diagenetic processes, and hydrocarbon reservoir characterization. For this investigation, ground-based hyperspectral data collection is combined with terrestrial LiDAR to study outcrops of Late Albian rudist buildups of the Edwards formation in the Lake Georgetown Spillway in Williamson County, Texas. The Edwards formation consists of shallow water deposits of reef and associated inter-reef facies, including rudist bioherms and biostromes. It is a significant aquifer and was investigated as a hydrocarbon play in south central Texas. Hyperspectral data were used to map compositional variation in the outcrop by distinguishing spectral properties unique to each material. Lithological variation was mapped in detail to investigate the structure and composition of rudist buildups. Hyperspectral imagery was registered to a 3D model produced from the LiDAR point cloud with an accuracy of up to one pixel. Flat-topped toucasid-rich bioherm facies were distinguished from overlying toucasid-rich biostrome facies containing chert nodules, overlying sucrosic dolostones, and uppermost peloid wackestones and packstones of back-reef facies. Ground truth was established by petrographic study of samples from this area and has validated classification products of remote sensing data. Several types of porosity were observed and have been associated with increased dolomitization. This ongoing research involves integration of remotely sensed datasets to analyze geometrical and compositional properties of this carbonate formation at a finer scale than traditional methods have achieved and seeks to develop a workflow for quick and efficient ground based remote sensing-assisted outcrop studies.

Sedimentary processes and depositional environments of the Horn River Shale in British Columbia, Canada

NASA Astrophysics Data System (ADS)

Yoon, Seok-Hoon; Koh, Chang-Seong; Joe, Young-Jin; Woo, Ju-Hwan; Lee, Hyun-Suk

2017-04-01

The Horn River Basin in the northeastern British Columbia, Canada, is one of the largest unconventional gas accumulations in North America. It consists mainly of Devonian shales (Horn River Formation) and is stratigraphically divided into three members, the Muskwa, Otterpark and Evie in descending order. This study focuses on sedimentary processes and depositional environments of the Horn River shale based on sedimentary facies analysis aided by well-log mineralogy (ECS) and total organic carbon (TOC) data. The shale formation consists dominantly of siliceous minerals (quartz, feldspar and mica) and subordinate clay mineral and carbonate materials, and TOC ranging from 1.0 to 7.6%. Based on sedimentary structures and micro texture, three sedimentary facies were classified: homogeneous mudstone (HM), indistinctly laminated mudstone (ILM), and planar laminated mudstone (PLM). Integrated interpretation of the sedimentary facies, lithology and TOC suggests that depositional environment of the Horn River shale was an anoxic quiescent basin plain and base-of-slope off carbonate platform or reef. In this deeper marine setting, organic-rich facies HM and ILM, dominant in the Muskwa (the upper part of the Horn River Formation) and Evie (the lower part of the Horn River Formation) members, may have been emplaced by pelagic to hemipelagic sedimentation on the anoxic sea floor with infrequent effects of low-density gravity flows (turbidity currents or nepheloid flows). In the other hand, facies PLM typifying the Otterpark Member (the middle part of the Horn River Formation) suggests more frequent inflow of bottom-hugging turbidity currents punctuating the hemipelagic settling of the background sedimentation process. The stratigraphic change of sedimentary facies and TOC content in the Horn River Formation is most appropriately interpreted to have been caused by the relative sea-level change, that is, lower TOC and frequent signal of turbidity current during the sea-level lowstand and vice versa. Therefore, the Horn River Formation represents an earlier upward shallowing environmental change from a deep basin (Evie) to shallower marginal slope (middle Otterpark), then turning back to the deeper marine environment (Muskwa) in association with overall regression-lowstand-transgression of the sea level. (This study is supported by "Research on Exploration Technologies and an Onsite Verification to Enhance the Fracturing Efficiency of a Shale Gas Formation" of the Korea Institute of Energy Technology Evaluation and Planning (KETEP), granted financial resource from the Ministry of Trade, Industry & Energy, Republic of Korea.)

Facies Relationships and Emplacement History of the 2014-2015 Eruption at Holuhraun, Iceland

NASA Astrophysics Data System (ADS)

Voigt, Joana; Hamilton, Christopher W.; Scheidt, Stephen P.; Jónsdóttir, Ingibjörg; Höskuldsson, Ármann; Þórðarson, Þorvaldur

2017-04-01

The 2014-15 eruption at Holuhraun is the largest flood lava flow emplaced in Iceland since the Laki eruption in 1783-1784. The 2014-15 event extruded approximately 1.46 cubic kilometers of lava (= 1.1-1.2 cubic kilometers calculated as dense rock equivalent) [1, 2] from August 2014 to February 2015 and covered an area of 83.5 square kilometers. This exceeds the volume magma erupted from Kilauea Volcano during the past decade. Studying the products of such a large and recent eruption provides unique insights into the emplacement of flood lavas, which are infrequent in the modern geologic record. The 2014-15 lava flow at Holuhraun therefore offers an ideal study area for examining lava flow textures (i.e., facies) that are unaffected by modification processes induced by running water, aeolian sedimentation, and vegetation. To achieve our aim in investigating the different facies and the emplacement history we used three approaches: 1) Analysis of remote sensing data obtained using Unmanned Aerial Vehicle (UAVs) at resolutions of 1-4 cm per pixel and used to generate 4-20 cm per pixel Digital Terrain Models (DTMs). 2) In-situ field observations establish detailed descriptions of the different facies and their relationships to one and another along the flow margin and accessible contact zones within the interior of the lava field. 3) Compilation of this information into a geospatial database in ArcGIS to compare the known eruption chronology to the different facies. The final orthomosaics and DTMs enable us to identify and map out lava types that make up the flow field and are known to span the spectrum from aā to pāhoehoe morphologies, including subtypes such as spiny, slabby and rubbly pāhoehoe [3]. Furthermore, we also investigate structures specific to individual lava types, such as linear compressional ridges and extensional rifts, platy-ridged pattern, wavelike form, spirals/roses and inflation features including lava rise pits and wedges. The results provide a better understanding of facies arrangements and their relation to effusions rate and versus fluxes within the flow field. [1] Bonnefoy, L. E. et al. 2017: Landscape Evolution after the 2014-2015 Lava Flow at Holuhraun, Iceland. LPSC. [2] Thordarson, et al. 2015: Emplacement and Growth of the August 2014 to February 2015 Nornahraun Lava Flow Field North Iceland. AGU V13D-01. [3] Pedersen, G. et al. 2016: Emplacement dynamics and lava field evolution of the flood basalt eruption at Holuhraun, Iceland: Observations from field and remote sensing data. Vol. 18, EGU2016‒13961.

Role of fluid in the mechanism of formation of volcaniclastic and coherent kimberlite facies: a diamond perspective

NASA Astrophysics Data System (ADS)

Fedortchouk, Yana; Chinn, Ingrid

2016-04-01

Dissolution features on diamonds recovered from kimberlites vary depending on the dissolution conditions and can be used as a reliable proxy for volatiles and their role in kimberlite emplacement. Volatiles determine the mechanism of magma emplacement; variation in volatile content and CO2/CO2+H2O ratio may affect the geology of kimberlite bodies and formation of coherent vs. volcaniclastic kimberlite facies. Here we examine the evolution of a kimberlite system during ascent using the resorption morphology of its diamond population. We use 655 macro-diamonds from a complex kimberlite pipe in the Orapa kimberlite field (Botswana) to examine the role of volatiles in the formation of the three facies comprising this pipe: two coherent kimberlite facies (CKA and CKB) and one massive volcaniclastic facies (MVK). The diamonds come from three drillholes through each of the studied kimberlite facies. Separate diamond samples derived from 2 - 13 m intervals were combined into 40 m depth intervals for statistical purposes. Four independent morphological methods allowed us to reliably discriminate products of resorption in kimberlite magma from resorption in the mantle, and use the former in our study. We found that the proportion of diamonds with kimberlitic resorption is the lowest in CKA - 22%, medium in MVK - 50%, and highest in CKB - 73%, and it increases with depth in each of the drillholes. Each kimberlite facies shows its own style of kimberlite-induced resorption on rounded tetrahexahedron (THH) diamonds: glossy surfaces in MVK, rough corroded surfaces in CKB, and combination of glossy surfaces with chains of circular pits in CKA, where these pits represent the initial stages of development of corrosive features observed on CKB diamonds. Based on the results of our previous experimental studies we propose that resorption of MVK diamonds is a product of interaction with COH fluid, resorption of CKB diamonds is a product of interaction with a volatile-undersaturated melt (possibly carbonatitic), and CKA diamonds show an overprint of melt-controlled resorption over a fluid-controlled resorption. We propose an early separation of the fluid phase during the ascent of this kimberlite magma, segregation of this fluid and rise towards the top of the magma column. Over-pressurisation caused by the expansion of this fluid worked as a driving force for the magma ascent acceleration. The magma column has separated into two parts: (1) the bubble-rich magma towards the top, explosive emplacement of which formed the MVK facies, followed by the "tailing" bubble-poor magma quietly arriving to form the CKA facies, and (2) magma that lost volatiles to the upwardly escaping bubbles, in which a slower ascent caused more intensive diamond resorption and delayed emplacement, forming the CKB facie. It is possible that formation, buoyancy, and growth of fluid bubbles controls the ascent of the kimberlite magma, where emplacement of bubble-rich magma forms volcaniclastic kimberlite facies, while fast rise of the bubbles through the magma column separates the fluid-rich phase that moves up preparing the conduit in the surrounding rocks and forms an explosive pipe at the surface, from a volatile-depleted magma, which slowly rises and fills the pipe with CK kimberlite facies.

Recent benthic foraminifera and sedimentary facies distribution of the Abu Dhabi (United Arab Emirates) coastline

NASA Astrophysics Data System (ADS)

Fiorini, Flavia; Lokier, Stephen W.

2014-05-01

The distribution of benthic foraminifera and sedimentary facies from Recent coastline environments adjacent to the coastline of Abu Dhabi (UAE) was studied in detail with the aim to: 1) provide reliable analogs for understanding and interpreting the depositional environment of ancient shallow-marine sediments from the UAE; 2) assess any modifications in the distribution of benthic environments and sedimentary facies in an area affected by significant anthropogenic activities - particular construction and land reclamation. A total of 100 sea-floor sediment samples were collected in different shallow-marine sedimentary environments (nearshore shelf, beach-front, channels, ooid shoals, lagoon and mangals) close to the coastline of Abu Dhabi Island. Where possible, we revisited the sampling sites used in several studies conducted in the middle of last century (prior to any significant anthropogenic activities) to assess temporal changes in Recent benthic foraminifera and sedimentary facies distribution during the last 50 years. Five foraminiferal assemblages were recognized in the studied area. Species with a porcellaneous test mainly belonging to the genera Quinqueloculina, Triloculina, Spiroloculina, Sigmoilinita are common in all studied areas. Larger benthic foraminifera Peneroplis and Spirolina are particularly abundant in samples collected on seaweed. Hyaline foraminifera mostly belonging to the genera Elphidium, Ammonia, Bolivina and Rosalina are also common together with Miliolidae in the nearshore shelf and beach front. Agglutinated foraminifera (Clavulina, Textularia, Ammobaculites and Reophax) are present in low percentages. The species belonging to the genera Ammobaculites and Reophax are present only in the finest grain samples particularly in lagoons and mangal environments and have not been reported previously in the studied area. The majority of the ooid shoal sediments, the coarser sediments of the beach-front and samples collected in dredged channels do not contain living foraminifera and the dead assemblage is mostly composed of a few specimens of coarse-sized Miliolidae with fragmented or abraded tests, probably transported from nearby environments. While the shallow-water settings of the Abu Dhabi coastline continue to be areas of active carbonate sedimentation, there have been significant changes in facies distributions over the last 50 years. In particular: × The opportunistic genera Ammonia and Elphidium have become more abundant. Reophax and Ammobaculites are reported in the area for the first time. × With anthropogenic activities some environments, such as inner lagoons, are lost whilst other areas show resilience to anthropogenic activities with little change in sedimentary facies distribution and foraminiferal assemblage. × No living foraminifera are found in dredged channels. The detailed analysis of these changes in foraminifera distribution and sedimentary facies allows us to further our understanding of the effects of anthropogenic activities on shallow-marine environments. By so doing, we are better able to distinguish between those changes that result from anthropogenic activities and those that are a result of naturally-occurring environmental perturbations.

The Middle Jurassic basinal deposits of the Surmeh Formation in the Central Zagros Mountains, southwest Iran: Facies, sequence stratigraphy, and controls

USGS Publications Warehouse

Lasemi, Y.; Jalilian, A.H.

2010-01-01

The lower part of the Lower to Upper Jurassic Surmeh Formation consists of a succession of shallow marine carbonates (Toarcian-Aalenian) overlain by a deep marine basinal succession (Aalenian-Bajocian) that grades upward to Middle to Upper Jurassic platform carbonates. The termination of shallow marine carbonate deposition of the lower part of the Surmeh Formation and the establishment of deep marine sedimentation indicate a change in the style of sedimentation in the Neotethys passive margin of southwest Iran during the Middle Jurassic. To evaluate the reasons for this change and to assess the basin configuration during the Middle Jurassic, this study focuses on facies analysis and sequence stratigraphy of the basinal deposits (pelagic and calciturbidite facies) of the Surmeh Formation, referred here as 'lower shaley unit' in the Central Zagros region. The upper Aalenian-Bajocian 'lower shaley unit' overlies, with an abrupt contact, the Toarcian-lower Aalenian platform carbonates. It consists of pelagic (calcareous shale and limestone) and calciturbidite facies grading to upper Bajocian-Bathonian platform carbonates. Calciturbidite deposits in the 'lower shaley unit' consist of various graded grainstone to lime mudstone facies containing mixed deep marine fauna and platform-derived material. These facies include quartz-bearing lithoclast/intraclast grainstone to lime mudstone, bioclast/ooid/peloid intraclast grainstone, ooid grainstone to packstone, and lime wackestone to mudstone. The calciturbidite layers are erosive-based and commonly exhibit graded bedding, incomplete Bouma turbidite sequence, flute casts, and load casts. They consist chiefly of platform-derived materials including ooids, intraclasts/lithoclasts, peloids, echinoderms, brachiopods, bivalves, and open-ocean biota, such as planktonic bivalves, crinoids, coccoliths, foraminifers, and sponge spicules. The 'lower shaley unit' constitutes the late transgressive and the main part of the highstand systems tract of a depositional sequence and grades upward to platform margin and platform interior facies as a result of late highstand basinward progradation. The sedimentary record of the 'lower shaley unit' in the Central Zagros region reveals the existence of a northwest-southeast trending platform margin during the Middle Jurassic that faced a deep basin, the 'Pars intrashelf basin' in the northeast. The thinning of calciturbidite layers towards the northeast and the widespread Middle Jurassic platform carbonates in the southern Persian Gulf states and in the Persian Gulf area support the existence of a southwest platform margin and platform interior source area. The platform margin was formed as a result of tectonic activity along the preexisting Mountain Front fault associated with Cimmerian continental rifting in northeast Gondwana. Flooding of the southwest platform margin during early to middle Bajocian resulted in the reestablishment of the carbonate sediment factory and overproduction of shallow marine carbonates associated with sea-level highstand, which led to vertical and lateral expansion of the platform and gradual infilling of the Pars intrashelf basin by late Bajocian time. ?? 2010 Springer-Verlag.

Surficial geology mapping of the Arctic Ocean: using subbottom profiling and multibeam echosounding data sets to constrain the subsea north of 64° as a layer for the IBCAO

NASA Astrophysics Data System (ADS)

Mosher, D. C.; Baldwin, K.; Gebhardt, C.

2016-12-01

Barriers to data collection such as perennial ice cover, climate, and remoteness have contributed to a paucity of geologic data in the Arctic. The last decade, however, has seen a multi-national push to increase the quantity and extent of data available at high latitudes. With increased availability of geophysical and geological data holdings, we expand on previous mapping initiatives by creating a comprehensive surficial geology map as a layer to the International Bathymetric Chart of the Arctic Ocean (IBCAO), providing a way to collectively analyze physiography, morphology and geology. Acoustic facies derived from subbottom profiles, combined with morphology illuminated from IBCAO and multibeam bathymetric datasets, and ground truth data compiled from cores and samples are used to map surficial geology units. We identified over 25 seismo-acoustic facies leading to interpretation of 12 distinct geologic units for the Arctic Ocean. The largest variety of seismic facies occurs on the shelves, which demonstrate the complex ice-margin history (e.g. chaotic bottom echoes with amorphous subbottom reflections that imply ice scouring processes). Shelf-crossing troughs generally lead to trough mouth fans on the continental margin with characteristic glaciogenic debris flow deposits (acoustically transparent units) comprising the bulk of the sedimentary succession. Other areas of continental slopes show a variety of facies suggesting sediment mass failure and turbidite deposition. Vast areas of the deep water portion of the Arctic are dominated by parallel reflections, indicative of hemi-pelagic and turbidity current deposition. Some deep water parts of the basin, however, show evidence of current reworking (sigmoidal reflections within bedforms), and contain deep sea channels with thalwegs (bright reflections within channels) and levee deposits (reflection pinch-out). These results delineated in the surficial geology map provide a comprehensive database of regional geologic information of the Arctic Ocean that can be applied to a variety of disciplines, including the study of Arctic sedimentary processes, climatologic and oceanographic processes, environmental and geohazard risk assessment, resource management, and Extended Continental Shelf mapping.

Pre-Holocene to Modern Evolution of the Lower Delaware Estuary: Constraints from High-Resolution Chirp Subbottom Profiles

NASA Astrophysics Data System (ADS)

Daw, Julianne

Throughout the Quaternary Period, the Delaware Estuary, which is located within the Mid-Atlantic region of the United States, has undergone substantial change as a result of sea-level fluctuations. To better understand the recent (late Pleistocene to Holocene) evolution of the region, chirp subbottom profiles were analyzed within Delaware Bay near the southern end of the Delaware River Navigation Channel including the adjacent shoals and sloughs, using RoxAnn bottom classification data and available vibracores to aid in interpreting sediment types and depositional environments within the study area. Using seismic processing software (SonarWiz6), chirp profiles were processed and reflection events were identified and their positions digitized. Major reflection events were analyzed using a seismic facies approach. The identified facies were each characterized as distinct units composed of reflections with unique elements, such as configuration, amplitude, and continuity. Five seismic facies were identified and their thicknesses determined. Depths to the major reflection events were correlated with sediment boundaries as observed in the available vibracores, allowing the seismic facies to be interpreted in terms of their associated sediment types and inferred environments of deposition. The distributions of surficial and subsurface seismic and sedimentological features were visualized using three-dimensional images. The interpretations of the identified facies are as follows: Facies I is a surficial unit of the modern Holocene estuarine deposits; Facies II is a beach-berm washover zone deposition; Facies III is a deposit of a lagoonal environment; Facies IV is a deposit of an open water environment; and Facies V is a marsh deposition. The chirp data, when integrated with available information from vibracores and RoxAnn bottom sediment classification, was also used to map the position of a former major river system (paleochannel). This paleochannel, trending generally northwest to southeast, can be correlated with the southern channel that was identified in previous work by Knebel and Circe (1988). In addition to the knowledge gained by studying the geological evolution of Delaware Bay, our data can be used by decision makers and stakeholders to inform future management of the Delaware Estuary in practical applications that range from planning for maintenance dredging of the navigation channel to determining locations and thicknesses of suitable sand resources for shoreline replenishment. The surficial layer that would be most affected by such applications is mostly composed of sand & muddy sand, but in the deeper portions and along the shoals, it is composed of mixed and coarse sediments and mud & sandy mud, respectively. Furthermore, the surficial unit is thickest (between 1.5 and 4 meters) in the central and eastern regions of the study area encompassing the deeper portions, and it is thinnest (up to 1 meter) along the western and northern regions that include the shoals.

Comparing orbiter and rover image-based mapping of an ancient sedimentary environment, Aeolis Palus, Gale crater, Mars

NASA Astrophysics Data System (ADS)

Stack, K. M.; Edwards, C. S.; Grotzinger, J. P.; Gupta, S.; Sumner, D. Y.; Calef, F. J.; Edgar, L. A.; Edgett, K. S.; Fraeman, A. A.; Jacob, S. R.; Le Deit, L.; Lewis, K. W.; Rice, M. S.; Rubin, D.; Williams, R. M. E.; Williford, K. H.

2016-12-01

This study provides the first systematic comparison of orbital facies maps with detailed ground-based geology observations from the Mars Science Laboratory (MSL) Curiosity rover to examine the validity of geologic interpretations derived from orbital image data. Orbital facies maps were constructed for the Darwin, Cooperstown, and Kimberley waypoints visited by the Curiosity rover using High Resolution Imaging Science Experiment (HiRISE) images. These maps, which represent the most detailed orbital analysis of these areas to date, were compared with rover image-based geologic maps and stratigraphic columns derived from Curiosity's Mast Camera (Mastcam) and Mars Hand Lens Imager (MAHLI). Results show that bedrock outcrops can generally be distinguished from unconsolidated surficial deposits in high-resolution orbital images and that orbital facies mapping can be used to recognize geologic contacts between well-exposed bedrock units. However, process-based interpretations derived from orbital image mapping are difficult to infer without known regional context or observable paleogeomorphic indicators, and layer-cake models of stratigraphy derived from orbital maps oversimplify depositional relationships as revealed from a rover perspective. This study also shows that fine-scale orbital image-based mapping of current and future Mars landing sites is essential for optimizing the efficiency and science return of rover surface operations.

Deposystem architectures and lithofacies of a submarine fan-dominated deep sea succession in an orogen: A case study from the Upper Triassic Langjiexue Group of southern Tibet

NASA Astrophysics Data System (ADS)

Zhang, Chaokai; Li, Xianghui; Mattern, Frank; Mao, Guozheng; Zeng, Qinggao; Xu, Wenli

2015-11-01

Over thirty stratigraphic sections of the Himalaya orogen Upper Triassic Langjiexue Group in southern Tibet, China, were studied to interpret the environments and lithofacies. The facies associations channel (A), lobe (B), levee-interchannel (C), and basin plain (D) with nine facies (A1-3, B1-3, and C1-3) were distinguished. They form six architectural elements: channel-interchannel, overbank-levee, crevasse-splay, outer fan-lobe, fan-fringe, and basin plain. Taking into account the facies analysis, (sub-) deposystem correlation, paleocurrent dispersal pattern, and restoration of primary stratal width, the Langjiexue Group displays the architecture of a coalescing submarine fan-dominated deep sea deposystem, measuring about 400-500 km × 600-700 km in size or even more, one of the largest pre-Cenozoic submarine fans ever reported. Subdivisionally, four fans, lacking inner fans, could have coalesced laterally within the submarine fan deposystem, and at least six submarine fan developments were vertically succeeded by mid- to outer-fan deposits with progradational to retrogradational successions. According to the range of 30-70% of sandstone content, the fan deposystem is mud- and sand-rich, suggesting a medium-far (over 400-600 km) transport of sediment from the source area.

Comparing orbiter and rover image-based mapping of an ancient sedimentary environment, Aeolis Palus, Gale crater, Mars

USGS Publications Warehouse

Stack, Kathryn M.; Edwards, Christopher; Grotzinger, J. P.; Gupta, S.; Sumner, D.; Edgar, Lauren; Fraeman, A.; Jacob, S.; LeDeit, L.; Lewis, K.W.; Rice, M.S.; Rubin, D.; Calef, F.; Edgett, K.; Williams, R.M.E.; Williford, K.H.

2016-01-01

This study provides the first systematic comparison of orbital facies maps with detailed ground-based geology observations from the Mars Science Laboratory (MSL) Curiosity rover to examine the validity of geologic interpretations derived from orbital image data. Orbital facies maps were constructed for the Darwin, Cooperstown, and Kimberley waypoints visited by the Curiosity rover using High Resolution Imaging Science Experiment (HiRISE) images. These maps, which represent the most detailed orbital analysis of these areas to date, were compared with rover image-based geologic maps and stratigraphic columns derived from Curiosity’s Mast Camera (Mastcam) and Mars Hand Lens Imager (MAHLI). Results show that bedrock outcrops can generally be distinguished from unconsolidated surficial deposits in high-resolution orbital images and that orbital facies mapping can be used to recognize geologic contacts between well-exposed bedrock units. However, process-based interpretations derived from orbital image mapping are difficult to infer without known regional context or observable paleogeomorphic indicators, and layer-cake models of stratigraphy derived from orbital maps oversimplify depositional relationships as revealed from a rover perspective. This study also shows that fine-scale orbital image-based mapping of current and future Mars landing sites is essential for optimizing the efficiency and science return of rover surface operations.

HIV status: the prima facie right not to know the result.

PubMed

Chan, Tak Kwong

2016-02-01

When a patient regains consciousness from Cryptococcus meningitis, the clinician may offer an HIV test (in case it has not already been done) (scenario 1) or offer to tell the patient his HIV status (in case the test has already been performed with a positive result while the patient was unconscious) (scenario 2). Youngs and Simmonds proposed that the patient has the prima facie right to refuse an HIV test in scenario 1 but not the prima facie right not to be told the HIV status in scenario 2. I submit that the claims to the right of refusal in both scenarios are similarly strong as they should both be grounded in privacy, self determination or dignity. But a conscientious agent should bear in mind that members of the public also have the right not to be harmed. When the circumstance allows, a proper balance of the potential benefits and harm for all the competing parties should guide the clinical decision as to whose right should finally prevail. Where a full ethical analysis is not possible, the presumption should favour respecting the patient's right of refusal in both scenarios. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

SEQUENCE STRATIGRAPHIC ANALYSIS AND FACIES ARCHITECTURE OF THE CRETACEOUS MANCOS SHALE ON AND NEAR THE JICARILLA APACHE INDIAN RESERVATION, NEW MEXICO-THEIR RELATION TO SITES OF OIL ACCUMULATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jennie Ridgley

2000-03-31

Oil distribution in the lower part of the Mancos Shale seems to be mainly controlled by fractures and by sandier facies that are dolomite-cemented. Structure in the area of the Jicarilla Apache Indian Reservation consists of the broad northwest- to southeast-trending Chaco slope, the deep central basin, and the monocline that forms the eastern boundary of the San Juan Basin. Superimposed on the regional structure are broad low-amplitude folds. Fractures seem best developed in the areas of these folds. Using sequence stratigraphic principals, the lower part of the Mancos Shale has been subdivided into four main regressive and transgressive components.more » These include facies that are the basinal time equivalents to the Gallup Sandstone, an overlying interbedded sandstone and shale sequence time equivalent to the transgressive Mulatto Tongue of the Mancos Shale, the El Vado Sandstone Member which is time equivalent to part of the Dalton Sandstone, and an unnamed interbedded sandstone and shale succession time equivalent to the regressive Dalton Sandstone and transgressive Hosta Tongue of the Mesaverde Group. Facies time equivalent to the Gallup Sandstone underlie an unconformity of regional extent. These facies are gradually truncated from south to north across the Reservation. The best potential for additional oil resources in these facies is in the southern part of the Reservation where the top sandier part of these facies is preserved. The overlying unnamed wedge of transgressive rocks produces some oil but is underexplored, except for sandstones equivalent to the Tocito Sandstone. This wedge of rocks is divided into from two to five units. The highest sand content in this wedge occurs where each of the four subdivisions above the Tocito terminates to the south and is overstepped by the next youngest unit. These terminal areas should offer the best targets for future oil exploration. The El Vado Sandstone Member overlies the transgressive wedge. It produces most of the oil (except for the Tocito Sandstone) from the lower Mancos. In the central and southern part of the Reservation, large areas, currently not productive or not tested, have the potential to contain oil in the El Vado simply based on the trend of the facies and structure. There has been little oil or gas production from the overlying regressive-transgressive wedge of rock and much of this interval is untested. Thus, large areas of the Reservation could contain hydrocarbon resources in these strata. Most of the Reservation lies within the oil generation window based on new Rock-Eval data from the Mancos Shale just south of the southern part of the Reservation. If these observations are valid then oil could have been generated locally and would only have needed to migrate short distances in to sandy reservoirs and fractures. This does not rule out long distance migration of oil from the deeper, more thermally mature part of the basin to the north. However, low porosity and permeability characterize sandier rocks in the Mancos, with the exception of Tocito-like sandstones. These factors could retard long distance oil migration through the sediment package, except through fracture or fault conduits. Thus, it is suggested that future oil and gas explorations in the Mancos treat the accumulations and reservoirs as unconventional and consider whether the source and reservoir are in closer proximity than has previously been assumed.« less

Structural analysis and shape-preferred orientation determination of the mélange facies in the Chañaral mélange, Las Tórtolas Formation, Coastal Cordillera, northern Chile

NASA Astrophysics Data System (ADS)

Fuentes, Paulina; Díaz-Alvarado, Juan; Fernández, Carlos; Díaz-Azpiroz, Manuel; Rodríguez, Natalia

2016-04-01

This study sheds light on the tectonic and structural knowledge of the mélange facies located to the south of Chañaral city, Chile. The Chañaral mélange has been related to an accretionary prism at the western active continental margin of Gondwana. Based on the fossil content, the original turbidite sequence would have been deposited during Devonian to Carboniferous times. The Chañaral mélange is included in the Las Tórtolas Formation, which corresponds to the Paleozoic metasedimentary basement located in the Coastal Range in northern Chile. It consists of a monotonous sequence of more than 90% of interbedded sandstones and shales, with a few limestones, pelagic chert, conglomerates and basic volcanic rocks, metamorphosed to the greenschist facies. In the study area, the Las Tórtolas Formation is divided into two structural domains separated by a major reverse dextral structure, called here the Infieles fault. To the east, the Las Tórtolas Formation is characterized by a brittle-ductile deformation, defined by the original sedimentary contacts in the turbiditic sequence. Besides, thrust faults and associated thrust propagation folds promotes a penetrative axial plane foliation. Mélange facies are located to the west of the Infieles fault. Although lithologies comprising this domain are similar to the rest of the Las Tórtolas Formation, mélange facies (ductile domain) are characterized by the complete disruption of the original architecture of the turbidite succession. The most significant structures in the mélange are the ubiquitous boudinage and pinch and swell structures, asymmetric objects, S-C structures and tight to isoclinal folds. This deformation is partitioned in the Chañaral mélange between linear fabric domains (L), characterized by quartzite blocks with prolate shape in a phyllite matrix with pencil structures, and linear-planar fabric domains (L-S), where quartzite objects show oblate shape and phyllites present a penetrative foliation. The intensity of deformational process is reflected in the high aspect ratios yielded by the quartzite constrictive (L) and flattened (L-S) object axes. Meso-scale shape preferred orientation (SPO) has been compared with quartz microtextures in quartzite blocks, resulting aspect ratios considerably lower than those obtained from the mesoscopic fabric. Main deformation mechanism observed in quartz microtextures are bulging-subgrain rotation recrystallization and dissolution-precipitation creep for pure and impure quartzites respectively. The temperatures deduced from these microtextures are between 350 and 400 °C, which coincides with the greenschists facies metamorphism observed in the Las Tórtolas and the mélange facies. Extremely dissociation between micro- and meso-scale deformation could be generated by dissolution at high differential stress in the boundaries of the quartzite layers and precipitation at low differential stress parts, which would increase the aspect ratio of the lenses whereas internally, quartz would have remained virtually unstrained. We propose here a tectonic setting for the Chañaral mélange formation based on the geodynamic evolution of the western active margin of South America during Late Paleozoic to Early Jurassic. Thus, the study area is located in a LT-HP zone of an accretionary complex, where rocks from the subduction channel (mélange facies) and the basal domain of the prism (brittle-ductile domain of the Las Tórtolas Formation) are in contact through the Infieles fault.

Multinomial Logistic Regression & Bootstrapping for Bayesian Estimation of Vertical Facies Prediction in Heterogeneous Sandstone Reservoirs

NASA Astrophysics Data System (ADS)

Al-Mudhafar, W. J.

2013-12-01

Precisely prediction of rock facies leads to adequate reservoir characterization by improving the porosity-permeability relationships to estimate the properties in non-cored intervals. It also helps to accurately identify the spatial facies distribution to perform an accurate reservoir model for optimal future reservoir performance. In this paper, the facies estimation has been done through Multinomial logistic regression (MLR) with respect to the well logs and core data in a well in upper sandstone formation of South Rumaila oil field. The entire independent variables are gamma rays, formation density, water saturation, shale volume, log porosity, core porosity, and core permeability. Firstly, Robust Sequential Imputation Algorithm has been considered to impute the missing data. This algorithm starts from a complete subset of the dataset and estimates sequentially the missing values in an incomplete observation by minimizing the determinant of the covariance of the augmented data matrix. Then, the observation is added to the complete data matrix and the algorithm continues with the next observation with missing values. The MLR has been chosen to estimate the maximum likelihood and minimize the standard error for the nonlinear relationships between facies & core and log data. The MLR is used to predict the probabilities of the different possible facies given each independent variable by constructing a linear predictor function having a set of weights that are linearly combined with the independent variables by using a dot product. Beta distribution of facies has been considered as prior knowledge and the resulted predicted probability (posterior) has been estimated from MLR based on Baye's theorem that represents the relationship between predicted probability (posterior) with the conditional probability and the prior knowledge. To assess the statistical accuracy of the model, the bootstrap should be carried out to estimate extra-sample prediction error by randomly drawing datasets with replacement from the training data. Each sample has the same size of the original training set and it can be conducted N times to produce N bootstrap datasets to re-fit the model accordingly to decrease the squared difference between the estimated and observed categorical variables (facies) leading to decrease the degree of uncertainty.

Diagenetic Iron Cycling in Ancient Alkaline Saline Lacustrine Sedimentary Rocks: A Case Study on the Jurassic Brushy Basin Member of the Morrison Formation, Colorado Plateau, USA

NASA Astrophysics Data System (ADS)

Potter-McIntyre, S. L.; Chan, M. A.; McPherson, B. J. O. L.

2014-12-01

The upper part of the Brushy Basin Member in the Four Corners region of the U.S. was deposited in an ephemeral alkaline saline lake system with copious input of volcanic ash. The variegated shale formation provides a setting for the study of early diagenetic iron cycling that records the action of alkaline saline fluid chemistries reacting with volcaniclastic sediments in the presence of microbes. A bull's-eye pattern of authigenic minerals with increasing alteration towards the basinal center similar to modern alkaline saline lakes provides evidence for an extreme paleoenvironmental interpretation. The purpose of this research is to document specific factors, such as reactive sediments, microbial influences, and grain size that affect concretion formation and iron cycling in an ancient extreme environment. Three broad diagenetic facies are interpreted by color and associated bioturbation features: red, green and intermediate. Diagenetic facies reflect meter-scale paleotopography: red facies represent shallow water to subaerial, oxidizing conditions; green facies reflect saturated conditions and reducing pore water chemistry shortly after deposition, and intermediate facies represent a combination of the previous two conditions. Evidence of biotic influence is abundant and trace fossils exhibit patterns associated with the diagenetic facies. Red diagenetic facies typically contain burrows and root traces and green diagenetic facies exhibit restricted biotic diversity typically limited to algal molds (vugs). Microbial fossils are well-preserved and are in close proximity to specific iron mineral textures suggesting biotic influence on the crystal morphology. Three categories of concretions are characterized based on mineralogy: carbonate, iron (oxyhydr)oxide and phosphate concretions. Concretion mineralogy and size vary within an outcrop and even within a stratigraphic horizon such that more than one main category is typically present in an outcrop. Variation in concretion mineralogy and morphology within the Brushy Basin Member suggests that alkaline saline fluid chemistries in concert with microbial interaction created diagenetic microenvironments within a larger lake system to influence iron cycling and these reactions can be spatially variable even on 10s of cm scales.

Partial melting of amphibolite to trondhjemite near Ykutat, Alaska

NASA Technical Reports Server (NTRS)

Barker, F.

1986-01-01

At Nunatak Fiord, 55 km NE of Yakutat, Alaska, a uniform layer of Cretaceous metabasalt approximately 3 km thick was metamorphosed to amphibolite facies and locally partially melted to trondhjemite pegmatite. Results of the rare earth element analysis performed on the amphibolite and the trondhjemite pegmatite are discussed.

Geology of the Blue Mountains region of Oregon, Idaho, and Washington; stratigraphy, physiography, and mineral resources of the Blue Mountains region

USGS Publications Warehouse

Vallier, T. L.; Brooks, H.C.

1994-01-01

PART 1: Stratigraphic and sedimentological analysis of sedimentary sequences from the Wallowa terrane of northeastern Oregon has provided a unique insight into the paleogeography and depositional history of the terrane, as well as establishing important constraints on its tectonic evolution and accretionary history. Its Late Triassic history is considered here by examining the two most important sedimentary units in the Wallowa terrane-the Martin Bridge Limestone and the Hurwal Formation. Conformably overlying epiclastic volcanic rocks of the Seven Devils Group, the Martin Bridge Limestone comprises shallow-water platform carbonate rocks and deeper water, off-platform slope and basin facies. Regional stratigraphic and tectonic relations suggest that the Martin Bridge was deposited in a narrow, carbonate-dominated (forearc?) basin during a lull in volcanic activity. The northern Wallowa platform was a narrow, rimmed shelf delineated by carbonate sand shoals. Interior parts of the shelf were characterized by supratidal to shallow subtidal carbonates and evaporites, which were deposited in a restricted basin. In the southern Wallowa Mountains, lithofacies of the Martin Bridge are primarily carbonate turbidites and debris flow deposits, which accumulated on a carbonate slope apron adjacent to the northern Wallowa rimmed shelf from which they were derived. Drowning of the platform in the latest Triassic, coupled with a renewed influx of volcanically derived sediments, resulted in the progradation of fine-grained turbidites of the Hurwal Formation over the carbonate platform. Within the Hurwal, Norian conglomerates of the Excelsior Gulch unit contain exotic clasts of radiolarian chert, which were probably derived from the Bakei terrane. Such a provenance provides evidence of a tectonic link between the Baker and Wallowa terranes as early as the Late Triassic, and offers support for the theory that both terranes were part of a more extensive and complex Blue Mountains island-arc terrane. PART 2: Mesozoic rocks exposed along the Snake River in the northern Wallowa terrane represent a volcanic island and its associated sedimentary basins within the Blue Mountains island arc of Washington, Oregon, and Idaho. In the northern part of the Wallowa terrane, rock units include the Wild Sheep Creek, Doyle Creek, and Coon Hollow Formations, the (informal) Imnaha intrusion, and the (informal) Dry Creek stock. The volcanic rocks of the Ladinian to Karnian Wild Sheep Creek Formation show two stages of evolution-an early dacitic phase Gower volcanic faciesY and a late mafic phase (upper volcanic facies). The two volcanic facies are separated by eruption-generated turbidites of siliceous argillites and arkosic arenites (argillitesandstone facies). The two magmatic phases of the Wild Sheep Creek Formation may be recorded by the compositional zoning from older quartz diorite and diorite to younger gabbro in the Imnaha intrusion. Although the Late Triassic Imnaha intrusion is in fault contact with the Wild Sheep Creek Formation, it may be a subduction-related pluton and was the likely magma source for the Wild Sheep Creek Formation. Interbedded with the upper volcanic facies are eruption-generated turbidite and debris flow deposits (sandstone-breccia facies) and thick carbonate units (limestone facies). The limestone facies consists of two marker units, which may represent carbonate platform environments. Clast imbrication, fossil orientation, and cross-stratification in the Wild Sheep Creek Formation indicate a shoaling to subaerial volcanic island to the south and southeast; sediment was transported to the north and northwest. The Karnian Doyle Creek Formation consists largely of epiclastic conglomerate, sandstone, and shale that were deposited in welloxygenated basins. Vitric tuffs interbedded with these sediments suggest shallow or subaerial pyroclastic eruptions. Quartz diorite clasts in this formation may indicate uplift

Publications - GMC 252 | Alaska Division of Geological & Geophysical

Science.gov Websites

DGGS GMC 252 Publication Details Title: Kemik sandstone - petrology, physical properties, and facies of Continental Margins Program, 1995, Kemik sandstone - petrology, physical properties, and facies of outcrop

An Aquatic Journey toward Aeolis Mons (Mount Sharp): Sedimentary Rock Evidence observed by Mars Science Laboratory

NASA Astrophysics Data System (ADS)

Gupta, Sanjeev; Edgar, Lauren; Williams, Rebecca; Rubin, David; Yingst, Aileen; Lewis, Kevin; Kocurek, Gary; Anderson, Ryan; Dromart, Gilles; Edgett, Ken; Hardgrove, Craig; Kah, Linda; Mangold, Nicolas; Milliken, Ralph; Minitti, Michelle; Palucis, Marisa; Rice, Melissa; Stack, Katie; Sumner, Dawn; Williford, Ken

2014-05-01

Since leaving Yellowknife Bay (summer 2013), Mars Science Laboratory Curiosity has investigated a number of key outcrops as it traverses along the Rapid Transit Route toward the entry point to begin its investigations of the extensive rock outcrops at the base of Mount Sharp. Rover observations are characterizing the variability of lithologies and sedimentary facies along the traverse and establishing stratigraphic relationships with the aim of reconstructing depositional processes and palaeoenvironments. Here, we report on sedimentological and stratigraphic observations based on images from the Mastcam and MAHLI instruments at Shaler and the Darwin waypoint. The informally named Shaler outcrop, which forms part of the Glenelg member of the Yellowknife Bay formation [1] is remarkable for the preservation of a rich suite of sedimentary structures and architecture, and was investigated on sols 120-121 and 309-324. The outcrop forms a pebbly sandstone body that is ~0.7 m thick and extends for up to 20 m. Shaler is largely characterized by pebbly sandstone facies showing well-developed decimeter-scale trough cross-stratification. Bedding geometries indicate sub-critical angles of climb, resulting in preservation of only the lee slope deposits. The grain size, and the presence and scale of cross-stratification imply sediment transport and deposition by unidirectional currents in a fluvial sedimentary environment. Curiosity investigated the informally named Darwin waypoint between sols 390 and 401, making detailed Mastcam and MAHLI observations at two separate locations. The Darwin outcrop comprises light-toned sandstone beds separated by darker pebbly sandstones. MAHLI observations permit differentiation of distinct sedimentary facies. The Altar Mountain facies is a poorly sorted pebbly sandstone that is rich in fine pebbles. Pebbles are sub-angular to sub-rounded in shape and show no preferred orientation or fabric. Pebbles and sand grains show clast-to-clast contacts. The clast-supported nature of the facies, the presence of coarse sand grains to fine pebbles, and the occurrence of some rounding of clasts indicates that these are sedimentary clasts that have been transported by aqueous flows. However, the absence of a well-sorted fabric, size grading of clast, and major rounding of grains suggests that these pebbly sandstones were rapidly deposited rather than built up from sustained fluvial reworking, implying that the deposits may be the result of more ephemeral river flows rather than sustained flow discharges. The Bardin Bluffs facies overlies the Altar Mountain facies and shows a more sand-dominated fabric with a smaller proportion of floating fine pebbles. This facies is also clast-supported but contains fewer pebbles and shows an overall fining-up trend. This facies is also interpreted to represent fluvial deposition albeit with a different grain size distribution than the Altar Mountains facies. We will compare and contrast the varying sedimentary fabrics and facies to develop models for the variety of aqueous fluvial transport processes that have led to the deposition of sedimentary rocks en route to Mount Sharp. The origin of these sedimentary rocks with relation to fluvial fan processes in Gale Crater will be discussed. References: [1] Grotzinger, J.P. et al Science 2013, doi: 10.1126/science.1242777.

Application of a Depositional Facies Model to an Acid Mine Drainage Site▿ †

PubMed Central

Brown, Juliana F.; Jones, Daniel S.; Mills, Daniel B.; Macalady, Jennifer L.; Burgos, William D.

2011-01-01

Lower Red Eyes is an acid mine drainage site in Pennsylvania where low-pH Fe(II) oxidation has created a large, terraced iron mound downstream of an anoxic, acidic, metal-rich spring. Aqueous chemistry, mineral precipitates, microbial communities, and laboratory-based Fe(II) oxidation rates for this site were analyzed in the context of a depositional facies model. Depositional facies were defined as pools, terraces, or microterracettes based on cm-scale sediment morphology, irrespective of the distance downstream from the spring. The sediments were composed entirely of Fe precipitates and cemented organic matter. The Fe precipitates were identified as schwertmannite at all locations, regardless of facies. Microbial composition was studied with fluorescence in situ hybridization (FISH) and transitioned from a microaerophilic, Euglena-dominated community at the spring, to a Betaproteobacteria (primarily Ferrovum spp.)-dominated community at the upstream end of the iron mound, to a Gammaproteobacteria (primarily Acidithiobacillus)-dominated community at the downstream end of the iron mound. Microbial community structure was more strongly correlated with pH and geochemical conditions than depositional facies. Intact pieces of terrace and pool sediments from upstream and downstream locations were used in flowthrough laboratory reactors to measure the rate and extent of low-pH Fe(II) oxidation. No change in Fe(II) concentration was observed with 60Co-irradiated sediments or with no-sediment controls, indicating that abiotic Fe(II) oxidation was negligible. Upstream sediments attained lower effluent Fe(II) concentrations compared to downstream sediments, regardless of depositional facies. PMID:21097582

Multiparameter elastic full waveform inversion with facies-based constraints

NASA Astrophysics Data System (ADS)

Zhang, Zhen-dong; Alkhalifah, Tariq; Naeini, Ehsan Zabihi; Sun, Bingbing

2018-06-01

Full waveform inversion (FWI) incorporates all the data characteristics to estimate the parameters described by the assumed physics of the subsurface. However, current efforts to utilize FWI beyond improved acoustic imaging, like in reservoir delineation, faces inherent challenges related to the limited resolution and the potential trade-off between the elastic model parameters. Some anisotropic parameters are insufficiently updated because of their minor contributions to the surface collected data. Adding rock physics constraints to the inversion helps mitigate such limited sensitivity, but current approaches to add such constraints are based on including them as a priori knowledge mostly valid around the well or as a global constraint for the whole area. Since similar rock formations inside the Earth admit consistent elastic properties and relative values of elasticity and anisotropy parameters (this enables us to define them as a seismic facies), utilizing such localized facies information in FWI can improve the resolution of inverted parameters. We propose a novel approach to use facies-based constraints in both isotropic and anisotropic elastic FWI. We invert for such facies using Bayesian theory and update them at each iteration of the inversion using both the inverted models and a priori information. We take the uncertainties of the estimated parameters (approximated by radiation patterns) into consideration and improve the quality of estimated facies maps. Four numerical examples corresponding to different acquisition, physical assumptions and model circumstances are used to verify the effectiveness of the proposed method.

Sedimentology and palaeontology of the Upper Jurassic Puesto Almada Member (Cañadón Asfalto Formation, Fossati sub-basin), Patagonia Argentina: Palaeoenvironmental and climatic significance

NASA Astrophysics Data System (ADS)

Cabaleri, Nora G.; Benavente, Cecilia A.; Monferran, Mateo D.; Narváez, Paula L.; Volkheimer, Wolfgang; Gallego, Oscar F.; Do Campo, Margarita D.

2013-10-01

Six facies associations are described for the Puesto Almada Member at the Cerro Bandera locality (Fossati sub-basin). They correspond to lacustrine, palustrine, and pedogenic deposits (limestones); and subordinated alluvial fan, fluvial, aeolian, and pyroclastic deposits. The lacustrine-palustrine depositional setting consisted of carbonate alkaline shallow lakes surrounded by flooded areas in a low-lying topography. The facies associations constitute four shallowing upward successions defined by local exposure surfaces: 1) a Lacustrine-Palustrine-pedogenic facies association with a 'conchostracan'-ostracod association; 2) a Palustrine facies association representing a wetland subenvironment, and yielding 'conchostracans', body remains of insects, fish scales, ichnofossils, and palynomorphs (cheirolepidiacean species and ferns growing around water bodies, and other gymnosperms in more elevated areas); 3) an Alluvial fan facies association indicating the source of sediment supply; and 4) a Lacustrine facies association representing a second wetland episode, and yielding 'conchostracans', insect ichnofossils, and a palynoflora mainly consisting of planktonic green algae associated with hygrophile elements. The invertebrate fossil assemblage found contains the first record of fossil insect bodies (Insecta-Hemiptera and Coleoptera) for the Cañadón Asfalto Formation. The succession reflects a mainly climatic control over sedimentation. The sedimentary features of the Puesto Almada Member are in accordance with an arid climatic scenario across the Upper Jurassic, and they reflect a strong seasonality with periods of higher humidity represented by wetlands and lacustrine sediments.

Applications of resistivity modeling in reservoir development: examples from Balder Field, Norwegian North Sea

USGS Publications Warehouse

Paillet, Frederick L.; Haynes, F.M.; Buretz, O.M.

2001-01-01

The massive Paleocene oil sands of the Balder Field are overlain by several thinly bedded Eocene sand-prone packages of variable facies and reservoir quality. Although these sands have been penetrated by numerous exploration and development wells, uncertainty remains as to their extent, distribution, and ultimate effect on reservoir performance. The section is geologically complex (thin beds, injected sands, shale clasts and laminae, and faulting), and also contains a field-wide primary gas cap. With a depletion plan involving both gas and water injection, geologic/reservoir characterization of the Eocene is critical for prudent resource management during depletion. With this goal, resistivity modeling and core-based thin bed reservoir description from the first phase of development drilling have been integrated with seismic attribute mapping. Detailed core description, core permeability and grain size distribution data delineate six facies and help in distinguishing laterally continuous massive and laminated sands from potentially non-connected injection sands and non-reservoir quality siltstones and tuffs. Volumetric assessment of the thin sand resource has been enhanced by I-D forward modeling of induction log response using a commercial resistivity modeling program, R,BAN. After defining beds and facies with core and high resolution log data, the AHF60 array induction curve response was approximated using the 6FF40 response. Because many of the beds were thinner than 6FF40 resolution, the modeling is considered to provide a lower bound on R,. However, for most beds this model-based R, is significantly higher than that provided by one-foot vertical resolution shallow resistivity data, and is thought to be the best available estimate of true formation resistivity. Sensitivities in STOOIP were assessed with multiple R, earth models which can later be tested against production results. In addition, water saturation height functions, developed in vertical wells and thick beds, can be validated in deviated wells with thin beds. Sand thickness models constrained by this logand core-based petrophysical analysis were used to build impedance seismic synthetic sections from which seismic attributes could be extracted and calibrated. The model-based attribute calibration was then applied to the seismic impedance 3-D cube permitting sand thickness to be mapped and reservoir geology to be modeled with significantly more detail than previously possible. These results will guide the field''s reservoir management and assist in the delineation of new targets.

Geochronology of multi-stage metamorphic events: Constraints on episodic zircon growth from the UHP eclogite in the South Altyn, NW China

NASA Astrophysics Data System (ADS)

Liu, Liang; Wang, Chao; Cao, Yu-Ting; Chen, Dan-Ling; Kang, Lei; Yang, Wen-Qiang; Zhu, Xiao-Hui

2012-04-01

Petrography, mineral chemistry and pressure-temperature (P-T) estimates were carried out for the eclogite from the South Altyn in NW China. The results suggest three stages of metamorphism: an ultra-high pressure (UHP) eclogite-facies metamorphism at 717-871 °C and ≥ 2.8 GPa, a high pressure (HP) granulite-facies metamorphism at 624-789 °C and 1.42-1.52 GPa, and an amphibolite-facies metamorphism at 597-728 °C and 0.99-1.17 GPa. Cathodoluminescence investigation revealed that zircons from the retrograde eclogite display a distinct core-rim structure. Cores are grey-white luminescent and contain mineral inclusions of Garnet + Omphacite + Rutile + Quartz, suggesting eclogite-facies metamorphic origin. The rims are dark grey luminescent and contain Garnet + Clinopyroxene + Pagioclase inclusions, forming at HP granulite-facies conditions. A few residual zircon grains with mottled internal structure also occur as the metamorphic cores. LA-ICPMS zircon U-Pb dating yielded three discrete age groups: (1) a Neoproterozoic protolith age of 752 ± 7 Ma for the residual grains, (2) an eclogite-facies metamorphic age of 500 ± 7 Ma for the metamorphic cores, and (3) a HP granulite-facies retrograde age of 455 ± 2 Ma for the rims. These ages indicate that the protolith of the Altyn eclogite probably formed in response to breakup of the Rodinia supercontinent during the Neoproterozoic; it was subjected to continental deep subduction and UHP metamorphism during early Paleozoic (~ 500 Ma) and subsequently underwent two stages of retrograde metamorphism during exhumation. The petrological and geochronological data suggest a clockwise P-T-t path for the UHP eclogite. According to pressures and ages for the peak UHP eclogite-facies and the retrograde HP granulite-facies metamorphism, an exhumation rate of 1.2 mm/yr was estimated for the eclogite, which is considerably slower than that of some UHP rocks from other UHP terranes (> 5 mm/yr). While the peak metamorphic age of 500 Ma is consistent with previous dates of 480-504 Ma, it is 40-60 Myr older than the HP/UHP metamorphic ages of 420-461 Ma for UHP eclogites in North Qaidam. The retrograde metamorphic age is 455 ± 2 Ma for the Altyn eclogite, which is 30-55 Myr older than ~ 400-425 Ma for the North Qaidam eclogites. These age differences suggest that the South Altyn and North Qaidam eclogites do not belong to the same HP/UHP metamorphic zone.

Pan-African granulites of central Dronning Maud Land and Mozambique: A comparison within the East-African-Antarctic orogen

USGS Publications Warehouse

Engvik, A.K.; Elevevold, S.; Jacobs, J.; Tveten, E.; de Azevedo, S.; Njange, F.

2007-01-01

Granulite-facies metamorphism is extensively reported in Late Neoproterozoic/Early Palaeozoic time during formation of the East-African-Antarctic orogen (EAAO). Metamorphic data acquired from the Pan-African orogen of central Dronning Maud Land (cDML) are compared with data from northern Mozambique. The metamorphic rocks of cDML are characterised by Opx±Grt-bearing gneisses and Sil+Kfs-bearing metapelites which indicate medium-P granulite-facies metamorphism. Peak conditions, which are estimated to 800-900ºC at pressures up to 1.0 GPa, were followed by near-isothermal decompression during late Pan-African extension and exhumation. Granulite-facies lithologies are widespread in northern Mozambique, and Grt+Cpx-bearing assemblages show that high-P granulite-facies conditions with PT reaching 1.55 GPa and 900ºC were reached during the Pan-African orogeny. Garnet is replaced by symplectites of Pl+Opx+Mag indicating isothermal decompression, and the subsequent formation of Pl+amphibole-coronas suggests cooling into amphibolite facies. It is concluded that high-T metamorphism was pervasive in EAAO in Late Neoproterozoic/Early Paleozoic time, strongly overprinting evidences of earlier metamorphic assemblages.

Hierarchy of facies of pyroclastic flow deposits generated by Laacher See type eruptions

NASA Astrophysics Data System (ADS)

Freundt, A.; Schmincke, H.-U.

1985-04-01

The upper Quaternary pyroclastic flow deposits of Laacher See volcano show compositional and structural facies variations on four different scales: (1) eruptive units of pyroclastic flows, composed of many flow units; (2) depositional cycles of as many as five flow units; flow units containing (3) regional intraflow-unit facies; and (4) local intraflow-unit subfacies. These facies can be explained by successively overlapping processes beginning in the magma column and ending with final deposition. The pyroclastic flow deposits thus reflect major aspects of the eruptive history of Laacher See volcano: (a) drastic changes in eruptive mechanism due to increasing access of water to the magma chamber and (b) change in chemical composition and crystal and gas content as evacuation of a compositionally zoned magma column progressed. The four scales of facies result from four successive sets of processes: (1) differentiation in the magma column and external factors governing the mechanism of eruption; (2) temporal variations of factors inducing eruption column collapse; (3) physical conditions in the eruption column and the way in which its collapse proceeds; and (4) interplay of flow-inherent and morphology-induced transport mechanics.

Geomorphology of the Alluvial Sediments and Bedrock in an Intermontane Basin: Application of Variogram Modeling to Electrical Resistivity Soundings

NASA Astrophysics Data System (ADS)

Khan, Adnan Ahmad; Farid, Asam; Akhter, Gulraiz; Munir, Khyzer; Small, James; Ahmad, Zulfiqar

2016-05-01

The study describes a methodology used to integrate legacy resistivity data with limited geological data in order to build three-dimensional models of the near subsurface. Variogram analysis and inversion techniques more typically found in the petroleum industry are applied to a set of 1D resistivity data taken from electrical surveys conducted in the 1980s. Through careful integration with limited geological data collected from boreholes and outcrops, the resultant model can be visualized in three dimensions to depict alluvium layers as lithological and structural units within the bedrock. By tuning the variogram parameters to account for directionality, it is possible to visualize the individual lithofacies and geomorphological features in the subsurface. In this study, an electrical resistivity data set collected as part of a groundwater study in an area of the Peshawar basin in Pakistan has been re-examined. Additional lithological logs from boreholes throughout the area have been combined with local outcrop information to calibrate the data. Tectonic activity during the Himalayan orogeny has caused uplift in the area and generated significant faulting in the bedrock resulting in the formation of depressions which are identified by low resistivity values representing clays. Paleo-streams have reworked these clays which have been eroded and replaced by gravel-sand facies along paleo-channels. It is concluded that the sediments have been deposited as prograding fan-shaped bodies and lacustrine deposits with interlayered gravel-sand and clay-silt facies. The Naranji area aquifer system has thus been formed as a result of local tectonic activity with fluvial erosion and deposition and is characterized by coarse sediments with high electrical resistivities.

Shallow properties of faults in carbonate rocks - The Jandaíra Formation, Potiguar Basin, Brazil

NASA Astrophysics Data System (ADS)

Bezerra, F. H.; Bertotti, G.; Rabelo, J.; Silva, A. T.; Carneiro, M. A.; Cazarin, C. L.; Silva, C. C.; Vieira, M. M.; Bisdom, K.; Moraes, A.

2014-12-01

We studied the development of shallow faults in the Jandaíra Formation, a Turonian-Campanian carbonate platform in the Potiguar Basin, northeastern Brazil. Our main goal was to characterize fault geometry and properties such as porosity and permeability, and associate these results with fluid flow in shallow conditions. We used an integrated multidisciplinary approach, which combined Quickbird satellite and an unmanned aerial vehicle (UAV, drone) imagery, structural and sedimentary-facies mapping, and petrographic and petrophysical analyses. The Jandaíra Formation presents a variety of carbonate facies, which include mudstones to bioclastic, peloidal, intraclastic, and oolitic grainstones. We modeled our remote sensing and structural data using a finite element analysis system for 2D deformation modeling. We applied the magnitudes and directions of the present-day stress field to simulate depths as deep as 500 m. These stress data were derived from borehole breakout data and drilling-induced tensile fractures observed in resistivity image logs. Our results indicate the occurrence of dilation processes along three sets of joints that were reactivated as faults in the upper crust: N-S, NE-, and E-W-striking faults. These faults provided preferential leaching pathways to fresh water percolation, contributing to localized dissolution and increased secondary porosity and permeability. The results also indicate that the tectonic stresses are concentrated in preferred structural zones such as fault intersection and termination, which are sites of increased fracturing and dissolution. Dissolution by fluids increased permeability in carbonate rocks from primary values of 0.0-0.94 mD to as much as 1370.11 mD. This process is mostly Cenozoic.

Ichnology applied to sequence stratigraphic analysis of Siluro-Devonian mud-dominated shelf deposits, Paraná Basin, Brazil

NASA Astrophysics Data System (ADS)

Sedorko, Daniel; Netto, Renata G.; Savrda, Charles E.

2018-04-01

Previous studies of the Paraná Supersequence (Furnas and Ponta Grossa formations) of the Paraná Basin in southern Brazil have yielded disparate sequence stratigraphic interpretations. An integrated sedimentological, paleontological, and ichnological model was created to establish a refined sequence stratigraphic framework for this succession, focusing on the Ponta Grossa Formation. Twenty-nine ichnotaxa are recognized in the Ponta Grossa Formation, recurring assemblages of which define five trace fossil suites that represent various expressions of the Skolithos, Glossifungites and Cruziana ichnofacies. Physical sedimentologic characteristics and associated softground ichnofacies provide the basis for recognizing seven facies that reflect a passive relationship to bathymetric gradients from shallow marine (shoreface) to offshore deposition. The vertical distribution of facies provides the basis for dividing the Ponta Grossa Formation into three major (3rd-order) depositional sequences- Siluro-Devonian and Devonian I and II-each containing a record of three to seven higher-order relative sea-level cycles. Major sequence boundaries, commonly coinciding with hiatuses recognized from previously published biostratigraphic data, are locally marked by firmground Glossifungites Ichnofacies associated with submarine erosion. Maximum transgressive horizons are prominently marked by unbioturbated or weakly bioturbated black shales. By integrating observations of the Ponta Grossa Formation with those recently made on the underlying marginal- to shallow-marine Furnas Formation, the entire Paraná Supersequence can be divided into four disconformity-bound sequences: a Lower Silurian (Llandovery-Wenlock) sequence, corresponding to lower and middle units of the Furnas; a Siluro-Devonian sequence (?Pridoli-Early Emsian), and Devonian sequences I (Late Emsian-Late Eifelian) and II (Late Eifelian-Early Givetian). Stratigraphic positions of sequence boundaries generally coincide with regressive phases on established global sea-level curves for the Silurian-Devonian.

From Permo-Triassic lithospheric thinning to Jurassic rifting at the Adriatic margin: Petrological and geochronological record in Valtournenche (Western Italian Alps)

NASA Astrophysics Data System (ADS)

Manzotti, Paola; Rubatto, Daniela; Darling, James; Zucali, Michele; Cenki-Tok, Bénédicte; Engi, Martin

2012-08-01

Slices of polycyclic metasediments (marbles and meta-cherts) are tectonically amalgamated with the polydeformed basement of the Dent Blanche tectonic system along a major Alpine shear zone in the Western Alps (Becca di Salé area, Valtournenche Valley). A combination of techniques (structural analysis at various scales, metamorphic petrology, geochronology and trace element geochemistry) was applied to determine the age and composition of accessory phases (titanite, allanite and zircon) and their relation to major minerals. The results are used to reconstruct the polyphase structural and metamorphic histories, comprising both pre-Alpine and Alpine cycles. The pre-Alpine evolution is associated with low-pressure high-temperature metamorphism related to Permo-Triassic lithospheric thinning. In meta-cherts, microtextural relations indicate coeval growth of allanite and garnet during this stage, at ~ 300 Ma. Textures of zircon also indicate crystallisation at HT conditions; ages scatter from 263 to 294 Ma, with a major cluster of data at ~ 276 Ma. In impure marble, U-Pb analyses of titanite domains (with variable Al and F contents) yield apparent 206Pb/238U dates range from Permian to Jurassic. Chemical and isotopic data suggest that titanite formed at Permian times and was then affected by (extension-related?) fluid circulation during the Triassic and Jurassic, which redistributed major elements (Al and F) and partially opened the U-Pb system. The Alpine cycle lead to early blueschist facies assemblages, which were partly overprinted under greenschist facies conditions. The strong Alpine compressional overprint disrupted the pre-Alpine structural imprint and/or reactivated earlier structures. The pre-Alpine metamorphic record, preserved in these slices of metasediments, reflects the onset of the Permo-Triassic lithospheric extension to Jurassic rifting.

33 CFR 1.07-10 - Reporting and investigation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... evidence to establish a prima facie case. If there is insufficient evidence, the case is either returned... prima facie case does exist, a case file is prepared and forwarded to the Hearing Officer, with a...

16 CFR 703.4 - Qualification of members.

Code of Federal Regulations, 2010 CFR

2010-01-01

... acquisition or ownership of an interest which is offered to the general public shall be prima facie evidence... acquisition or ownership of an interest which is offered to the general public shall be prima facie evidence...

Morphologic and stratigraphic evolution of muddy ebb-tidal deltas along a subsiding coast: Barataria Bay, Mississippi River delta

USGS Publications Warehouse

FitzGerald, D.M.; Kulp, M.; Penland, S.; Flocks, J.; Kindinger, J.

2004-01-01

The Barataria barrier coast formed between two major distributaries of the Mississippi River delta: the Plaquemines deltaic headland to the east and the Lafourche deltaic headland to the west. Rapid relative sea-level rise (1??03 cm year-1) and other erosional processes within Barataria Bay have led to substantial increases in the area of open water (> 775 km2 since 1956) and the attendant bay tidal prism. Historically, the increase in tidal discharge at inlets has produced larger channel cross-sections and prograding ebb-tidal deltas. For example, the ebb delta at Barataria Pass has built seaward > 2??2 km since the 1880s. Shoreline erosion and an increasing bay tidal prism also facilitated the formation of new inlets. Four major lithofacies characterize the Barataria coast ebb-tidal deltas and associated sedimentary environments. These include a proximal delta facies composed of massive to laminated, fine grey-brown to pale yellow sand and a distal delta facies consisting of thinly laminated, grey to pale yellow sand and silty sand with mud layers. The higher energy proximal delta deposits contain a greater percentage of sand (75-100%) compared with the distal delta sediments (60-80%). Associated sedimentary units include a nearshore facies consisting of horizontally laminated, fine to very fine grey sand with mud layers and an offshore facies that is composed of grey to dark grey, laminated sandy silt to silty clay. All facies coarsen upwards except the offshore facies, which fines upwards. An evolutionary model is presented for the stratigraphic development of the ebb-tidal deltas in a regime of increasing tidal energy resulting from coastal land loss and tidal prism growth. Ebb-tidal delta facies prograde over nearshore sediments, which interfinger with offshore facies. The seaward decrease in tidal current velocity of the ebb discharge produces a gradational contact between proximal and distal tidal delta facies. As the tidal discharge increases and the inlet grows in dimensions, the proximal and distal tidal delta facies prograde seawards. Owing to the relatively low gradient of the inner continental shelf, the ebb-tidal delta lithosome is presently no more than 5 m thick and is generally only 2-3 m in thickness. The ebb delta sediment is sourced from deepening of the inlet and the associated channels and from the longshore sediment transport system. The final stage in the model envisages erosion and segmentation of the barrier chain, leading to a decrease in tidal discharge through the former major inlets. This process ultimately results in fine-grained sedimentation seaward of the inlets and the encasement of the ebb-tidal delta lithosome in mud. The ebb-tidal deltas along the Barataria coast are distinguished from most other ebb deltas along sand-rich coasts by their muddy content and lack of large-scale stratification produced by channel cut-and-fills and bar migration. ?? 2004 International Association of Sedimentologists.

Mediterranean undercurrent sandy contourites, Gulf of Cadiz, Spain

USGS Publications Warehouse

Hans, Nelson C.; Baraza, J.; Maldonado, A.

1993-01-01

The Pliocene-Quaternary pattern of contourite deposits on the eastern Gulf of Cadiz continental slope results from an interaction between linear diapiric ridges that are perpendicular to slope contours and the Mediterranean undercurrent that has flowed northwestward parallel to the slope contours and down valleys between the ridges since the late Miocene opening of the Strait of Gibraltar. Coincident with the northwestward decrease in undercurrent speeds from the Strait there is the following northwestward gradation of sediment facies associations: (1) upper slope facies, (2) sand dune facies on the upstream mid-slope terrace, (3) large mud wave facies on the lower slope, (4) sediment drift facies banked against the diapiric ridges, and (5) valley facies between the ridges. The southeastern sediment drift facies closest to Gibraltar contains medium-fine sand beds interbedded with mud. The adjacent valley floor facies is composed of gravelly, shelly coarse to medium sand lags and large sand dunes on the valley margins. Compared to this, the northwestern drift contains coarse silt interbeds and the adjacent valley floors exhibit small to medium sand dunes of fine sand. Further northwestward, sediment drift grades to biogenous silt near the Faro Drift at the Portuguese border. Because of the complex pattern of contour-parallel and valley-perpendicular flow paths of the Mediterranean undercurrent, the larger-scale bedforms and coarser-grained sediment of valley facies trend perpendicular to the smaller-scale bedforms and finer-grained contourite deposits of adjacent sediment drift facies. The bottom-current deposits of valleys and the contourites of the Cadiz slope intervalley areas are distinct from turbidite systems. The valley sequences are not aggradational like turbidite channel-levee complexes, but typically exhibit bedrock walls against ridges, extensive scour and fill into adjacent contourites, transverse bedform fields and bioclastic lag deposits. Both valley and contourite deposits exhibit reverse graded bedding and sharp upper bed contacts in coarse-grained layers, low deposition rates, and a regional pattern of bedform zones, textural variation, and compositional gradation. The surface sandy contourite layer of 0.2-1.2 m thickness that covers the Gulf of Cadiz slope has formed during the present Holocene high sea level because high sea level results in maximum water depth over the Gibraltar sill and full development of the Mediterranean undercurrent. The late Pleistocene age of the mud underlying the surface sand sheet correlates with the age of the last sea-level lowstand and apparent weak Mediterranean undercurrent development. Thus, the cyclic deposition of sand or mud layers and contourite or drape sequences appear to be related to late Pliocene and Quaternary sea-level changes and Mediterranean water circulation patterns. Since its Pliocene origin, the contourite sequence has had low deposition rates of < 5 cm/1000y on the upper slope and < 13 cm/1000y in the middle slope sediment drift. ?? 1993.

Silurian and Devonian in Vietnam—Stratigraphy and facies

NASA Astrophysics Data System (ADS)

Thanh, Tống Duy; Phương, Tạ Hoàng; Janvier, Philippe; Hùng, Nguyễn Hữu; Cúc, Nguyễn Thị Thu; Dương, Nguyễn Thùy

2013-09-01

Silurian and Devonian deposits in Viet Nam are present in several zones and regions, including Quang Ninh, East Bac Bo, and West Bac Bo Zones of the Bac Bo Region, the Dien Bien-Nghe An and Binh Tri Thien Zones of the Viet-Lao Region, and the South Trung Bo, and Western Nam Bo Zones of the South Viet Nam Region (Fig. 1). The main lithological features and faunal composition of the Silurian and Devonian Units in all these zones are briefly described. The Silurian consists of deep-water deposits of the upper parts of the Co To and Tan Mai Formations in the Quang Ninh Zone, the upper parts of the Phu Ngu Formation in the East Bac Bo Zone and the upper parts of the Long Dai and Song Ca Formations in the Viet-Lao Region. Shallow water facies Silurian units containing benthic faunas are more widely distributed, including the upper part of the Sinh Vinh and Bo Hieng Formations in the West Bac Bo Zone, the Kien An Formation in the Quang Ninh Zone, and, in the Viet-Lao Region, the Dai Giang Formation and the upper part of the Tay Trang Formation. No Lower and Middle Devonian deposits indicate deep water facies, but they are characterized by different shallow water facies. Continental to near shore, deltaic facies characterize the Lower Devonian Song Cau Group in the East Bac Bo Zone, the Van Canh Formation in the Quang Ninh Zone, and the A Choc Formation in the Binh Tri Thien Zone. Similar facies also occur in the Givetian Do Son Formation of the Quang Ninh Zone, and the Tan Lap Formation in the East Bac Bo Zone, and consist of coarse terrigenous deposits—cross-bedded conglomerates, sandstone, etc. Most Devonian units are characterized by shallow marine shelf facies. Carbonate and terrigenous-carbonate facies dominate, and terrigenous facies occur in the Lower and Middle Devonian sections in some areas only. The deep-water-like facies is characteriztic for some Upper Devonian formations in the Bac Bo (Bang Ca and Toc Tat Formations) and Viet-Lao Regions (Thien Nhan and Xom Nha Formations). These formations contain cherty shale or siliceous limestone, and fossils consist of conodonts, but there are also brachiopods and other benthos. They were possibly deposited in a deep water environment on the slope of the continental shelf. Most Devonian units distributed in the North and the Central Viet Nam consist of self shallow water sediments, and apparently they were deposited in a passive marginal marine environment. The coarse clastic continental or subcontinental deposits are distributed only in some areas of the East Bac Bo and of the Quang Ninh zones of the Bac Bo Region, and in the south of the Binh Tri Thien Zone. This situation suggests the influence of the Caledonian movement at the end of the Silurian period that called the Guangxi movement in South China.

Glaciomarine sedimentation and bottom current activity on the north-western and northern continental margins of Svalbard during the late Quaternary

NASA Astrophysics Data System (ADS)

Chauhan, Teena; Noormets, Riko; Rasmussen, Tine L.

2016-04-01

Palaeo-bottom current strength of the West Spitsbergen Current (WSC) and the influence of the Svalbard-Barents Sea Ice Sheet (SBIS) on the depositional environment along the northern Svalbard margins are poorly known. Two gravity cores from the southern Yermak Plateau and the upper slope north of Nordaustlandet, covering marine isotope stage (MIS) 1 to MIS 5, are investigated. Five lithofacies, based on grain size distribution, silt/clay ratio, content and mean of sortable silt (SS), are distinguished to characterise the contourite-dominated sedimentary environments. In addition, depositional environments are described using total organic carbon (TOC), total sulphur (TS) and calcium carbonate (CaCO3) contents of sediments. Facies A, containing coarse SS, suggests strong bottom current activity and good bottom water ventilation conditions as inferred from low TOC content. This facies was deposited during the glacial periods MIS 4, MIS 2 and during the late Holocene. Facies B is dominated by fine SS indicating weak bottom current and poor ventilation (cf. high TOC content of 1.2-1.6%), and correlates with the MIS 4/3 and MIS 2/1 transition periods. With an equal amount of clay and sand, fine SS and high content of TOC, facies C indicates reduced bottom current strength for intervals with sediment supply from proximal sources such as icebergs, sea ice or meltwater discharge. This facies was deposited during the last glacial maximum. Facies D represents mass-flow deposits on the northern Svalbard margin attributed to the SBIS advance at or near the shelf edge. Facies E sediments indicating moderate bottom current strength were deposited during MIS 5 and MIS 3, and during parts of MIS 2. This first late Quaternary proxy record of the WSC flow and sedimentation history from the northern Svalbard margin suggests that the oceanographic conditions and ice sheet processes have exerted first-order control on sediment properties.

Fluvial to Lacustrine Facies Transitions in Gale Crater, Mars

NASA Technical Reports Server (NTRS)

Sumner, Dawn Y.; Williams, Rebecca M. E.; Schieber, Juergen; Palucis, Marisa C.; Oehler, Dorothy Z.; Mangold, Nicolas; Kah, Linda C.; Gupta, Sanjeev; Grotzinger, John P.; Grant, John A., III;

Discontinuity surfaces in the Lower Cretaceous of the high Andes (Mendoza, Argentina): Trace fossils and environmental implications

NASA Astrophysics Data System (ADS)

Mangano, M. G.; Buatois, L. A.

The paleoecologic and paleoenvironmental significance of trace fossils related to discontinuity surfaces in the Lower Cretaceous marine deposits of the Aconcagua area are analysed here. Carbonate-evaporite shoaling-upward cycles, developed by high organic production in a shallow hypersaline restricted environment, make up the section. Two types of cycles are defined, being mainly distinguished by their subtidal unit. Cycle I begins with a highly dolomitized lower subtidal unit (Facies A), followed upward by an intensely bioturbated upper subtidal unit (Facies B). The nodular packstone facies (B 1) is capped by a discontinuity surface (firmground or hardground) and occasionally overlain by an oystreid bed (Facies C). Cycle II is characterized by a pelletoidal subtidal unit (Facies B 2) with an abnormal salinity impoverished fauna. Both cycles end with intertidal to supratidal evaporite deposits (Facies D and E, respectively). Attention is particularly focused on cycle I due to its ichologic content. The mode of preservation and the distribution of trace fossils in nodular packstone facies are controlled by original substrate consolidation. Thalassinoides paradoxicus (pre-omission suite) represents colonization in a soft bottom, while Thalassinoides suevicus (omission suite pre-lithification) is apparently restricted to firm substrates. When consolidation processes are interrupted early, only an embryonic hard-ground that represents a minor halt in sedimentation was developed. Sometimes, consolidation processes continued leading to an intraformational hardground. Colonization by Trypanites solitarius (omission suite post-lithification) and Exogyra-like oystreids possibly characterizes hard substrate stage. When two discontinuity surfaces follow closely, a post-omission suite may be defined in relation to the lower cemented surface. As trace fossils are so closely related to changes in the degree of bottom lithification, they prove to be very useful as indicators of substrate evolution. The presence of discontinuity surfaces, evidenced by trace fossil association, suggests changes of sedimentary rate and environmental conditions that should be taken into account in future studies seeking to erect depositional models for these Cretaceous deposits.

Late Devonian glacigenic and associated facies from the central Appalachian Basin, eastern United States

USGS Publications Warehouse

Brezinski, D.K.; Cecil, C.B.; Skema, V.W.

2010-01-01

Late Devonian strata in the eastern United States are generally considered as having been deposited under warm tropical conditions. However, a stratigraphically restricted Late Devonian succession of diamictite- mudstonesandstone within the Spechty Kopf and Rockwell Formations that extends for more than 400 km along depositional strike within the central Appalachian Basin may indicate other wise. This lithologic association unconformably overlies the Catskill Formation, where a 3- to 5-m-thick interval of deformed strata occurs immediately below the diamictite strata. The diamictite facies consists of several subfacies that are interpreted to be subglacial, englacial, supraglacial meltout, and resedimented deposits. The mudstone facies that overlies the diamictite consists of subfacies of chaotically bedded, clast-poor mudstone, and laminated mudstone sub facies that represent subaqueous proximal debris flows and distal glaciolacustrine rhythmites or varvites, respectively. The pebbly sandstone facies is interpreted as proglacial braided outwash deposits that both preceded glacial advance and followed glacial retreat. Both the tectonic and depositional frameworks suggest that the facies were deposited in a terrestrial setting within the Appalachian foreland basin during a single glacial advance and retreat. Regionally, areas that were not covered by ice were subject to increased rainfall as indicated by wet-climate paleosols. River systems eroded deeper channels in response to sea-level drop during glacial advance. Marine facies to the west contain iceborne dropstone boulders preserved within contemporaneous units of the Cleveland Shale Member of the Ohio Shale.The stratigraphic interval correlative with sea-level drop, climate change, and glacigenic succession represents one of the Appalachian Basin's most prolific oil-and gas-producing intervals and is contemporaneous with a global episode of sea-level drop responsible for the deposition of the Hangenberg Shale/Sandstone of Europe. This interval records the Hangenberg biotic crisis near the Devonian-Carboniferous boundary. ?? 2009 Geological Society of America.

Sedimentology of the fluvial and fluvio-marine facies of the Bahariya Formation (Early Cenomanian), Bahariya Oasis, Western Desert, Egypt

NASA Astrophysics Data System (ADS)

Khalifa, M. A.; Catuneanu, O.

2008-05-01

The Lower Cenomanian Bahariya Formation in the Bahariya Oasis, Western Desert, Egypt, was deposited under two coeval environmental conditions. A fully fluvial system occurs in the southern portion of the Bahariya Oasis, including depositional products of meandering and braided streams, and a coeval fluvio-marine setting is dominant to the north. These deposits are organized into four unconformity-bounded depositional sequences, whose architecture is shaped by a complex system of incised valleys. The fluvial portion of the lower two depositional sequences is dominated by low-energy, meandering systems with a tabular geometry, dominated by overbank facies. The fluvial deposits of the upper two sequences represent the product of sedimentation within braided streams, and consist mainly of amalgamated channel-fills. The braided fluvial systems form the fill of incised valleys whose orientation follows a southeast-northwest trending direction, and which truncate the underlying sequences. Four sedimentary facies have been identified within the braided-channel systems, namely thin-laminated sandstones (Sh), cross-bedded sandstones (Sp, St), massive ferruginous sandstones (Sm) and variegated mudstones (Fm). The exposed off-channel overbank facies of the meandering systems include floodplain (Fm) and crevasse splay (Sl) facies. The fluvio-marine depositional systems consist of interbedded floodplain, coastal and shallow-marine deposits. The floodplain facies include fine-grained sandstones (Sf), laminated siltstones (Stf) and mudstones (Mf) that show fining-upward cycles. The coastal to shallow-marine facies consist primarily of mudstones (Mc) and glauconitic sandstones (Gc) organized vertically in coarsening-upward prograding cyclothems topped by thin crusts of ferricrete (Fc). The four depositional sequences are present across the Bahariya Oasis, albeit with varying degrees of preservation related to post-depositional erosion associated with the formation of sequence boundaries. These unconformities may be overlain by braided-stream channel sandstones at the base of incised valleys, or marked by ferricrete paleosols (lithofacies Fc) in the interfluve areas.

Three-dimensional facies architecture of the Salem Limestone (middle Mississippian), Eastern Margin of Illinois basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nadeem, A.; Keith, B.D.; Thompson, T.A.

Mapping of sedimentary surfaces in the Middle Mississippian Salem Limestone exposed on sawed quarry walls in south-central Indiana has revealed a hierarchy of depositional units representative of the extremely dynamic hydrographic regime of the upper shoreface zone. The depositional units on the scale of microform and mesoform are represented by the microfacies and the facies respectively. Based on their hierarchy, genetically related depositional units and associated bounding surfaces were grouped together to construct four architectural packages (APs) of the scale of mesoforms. AP-I is dominantly an echinoderm- and bryozoan-rich grainstone and consists of bedforms ranging from small ripples bounded bymore » first-order surfaces to two- and three- dimensional megaripples bounded by the second-order surfaces. It formed as part of a giant ramp (asymmetric wavefield) within the intrashoal channel setting. AP-II, also a skeletal grainstone, is a complex of giant sandwaves that moved into the area under the infulence of a storm and partly filled the basal channel form of AP-I. Large avalanche foresets with tangential toesets prevail. AP-III is a dark-gray spatially discontinuous skeletal grainstone to packstone that laterally grades into a skeletal packstone to wackestone. It locally developed overhangs, rips-ups, and hardground on its upper surface. AP-IV is a skeletal and oolitic grainstone formed of tabular two-dimensional megaripples (planar cross-beds) and three-dimensional oscillatory megaripples (trough cross-beds). These architectural packages based on the bedform architecture and micro-and mesoscale compositional changes can be used to characterize micro-, meso, and macroscale heterogeneities. Models of facies architecture from this and similar outcrop studies can be applied to the subsurface Salem reservoirs in the Illinois Basin using cores.« less

Modeling 3-D permeability distribution in alluvial fans using facies architecture and geophysical acquisitions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Lin; Gong, Huili; Dai, Zhenxue

Alluvial fans are highly heterogeneous in hydraulic properties due to complex depositional processes, which make it difficult to characterize the spatial distribution of the hydraulic conductivity ( K). An original methodology is developed to identify the spatial statistical parameters (mean, variance, correlation range) of the hydraulic conductivity in a three-dimensional (3-D) setting by using geological and geophysical data. More specifically, a large number of inexpensive vertical electric soundings are integrated with a facies model developed from borehole lithologic data to simulate the log 10( K) continuous distributions in multiple-zone heterogeneous alluvial megafans. The Chaobai River alluvial fan in the Beijing Plain,more » China, is used as an example to test the proposed approach. Due to the non-stationary property of the K distribution in the alluvial fan, a multiple-zone parameterization approach is applied to analyze the conductivity statistical properties of different hydrofacies in the various zones. The composite variance in each zone is computed to describe the evolution of the conductivity along the flow direction. Consistently with the scales of the sedimentary transport energy, the results show that conductivity variances of fine sand, medium-coarse sand, and gravel decrease from the upper (zone 1) to the lower (zone 3) portion along the flow direction. In zone 1, sediments were moved by higher-energy flooding, which induces poor sorting and larger conductivity variances. The composite variance confirms this feature with statistically different facies from zone 1 to zone 3. Lastly, the results of this study provide insights to improve our understanding on conductivity heterogeneity and a method for characterizing the spatial distribution of  K in alluvial fans.« less

Modeling 3-D permeability distribution in alluvial fans using facies architecture and geophysical acquisitions

DOE PAGES

Zhu, Lin; Gong, Huili; Dai, Zhenxue; ...

2017-02-03

Alluvial fans are highly heterogeneous in hydraulic properties due to complex depositional processes, which make it difficult to characterize the spatial distribution of the hydraulic conductivity ( K). An original methodology is developed to identify the spatial statistical parameters (mean, variance, correlation range) of the hydraulic conductivity in a three-dimensional (3-D) setting by using geological and geophysical data. More specifically, a large number of inexpensive vertical electric soundings are integrated with a facies model developed from borehole lithologic data to simulate the log 10( K) continuous distributions in multiple-zone heterogeneous alluvial megafans. The Chaobai River alluvial fan in the Beijing Plain,more » China, is used as an example to test the proposed approach. Due to the non-stationary property of the K distribution in the alluvial fan, a multiple-zone parameterization approach is applied to analyze the conductivity statistical properties of different hydrofacies in the various zones. The composite variance in each zone is computed to describe the evolution of the conductivity along the flow direction. Consistently with the scales of the sedimentary transport energy, the results show that conductivity variances of fine sand, medium-coarse sand, and gravel decrease from the upper (zone 1) to the lower (zone 3) portion along the flow direction. In zone 1, sediments were moved by higher-energy flooding, which induces poor sorting and larger conductivity variances. The composite variance confirms this feature with statistically different facies from zone 1 to zone 3. Lastly, the results of this study provide insights to improve our understanding on conductivity heterogeneity and a method for characterizing the spatial distribution of  K in alluvial fans.« less

Recent sedimentological studies of the Murray and Stimson formations and their implications for Gale crater evolution, Mars

NASA Astrophysics Data System (ADS)

Gupta, Sanjeev; Fedo, Chris; Grotzinger, John; Edgett, Ken; Vasavada, Ashwin

2017-04-01

The Mars Science Laboratory (MSL) Curiosity rover has been exploring sedimentary rocks on the lower north slope of Aeolis Mons since August 2014. Previous work has demonstrated a succession of sedimentary rock types deposited dominantly in river-delta settings (Bradbury group), and interfingering/overlying contemporaneous/younger lake settings (Murray formation, Mt. Sharp group). The Murray formation is unconformably overlain by the Stimson formation, an ancient aeolian sand lithology. Here, we describe the MSL team's most recent sedimentological findings regarding the Murray and Stimson formations. The Murray formation is of the order of 200 meters thick and formed dominantly of mudstones. The mudstone facies, originally identified at the Pahrump Hills field site, show abundant fine-scale planar laminations throughout the Murray formation succession and is interpreted to record deposition in an ancient lake system in Gale crater. Since leaving the Naukluft Plateau (Stimson formation rocks) and driving south-southeastwards and progressive stratigraphically upwards through the Murray succession, we have recognised a variety of additional facies have been recognized that indicate variability in the overall palaeoenvironmental setting. These facies include (1) cross-bedded siltstones to very fine-grained sandstones with metre-scale troughs that might represent aeolian sedimentation; (2) a heterolithic mudstone-sandstone facies with laminated fine-grained strata, cm-scale ripple cross-laminations in siltstone or very fine sandstone, and dm-scale cross-stratified siltstone and very fine grained sandstone. The palaeoenvironmental setting for the second facies remains under discussion. Our results show that Gale crater hosted lakes systems for millions to tens of millions of years, perhaps punctuated by drier intervals. Murray strata are unconformably overlain by the Stimson formation. Stimson outcrops are typically characterized by cross-bedded sandstones with cross-sets ranging between 40-80 cm thick (Fig. 2). Within the sets, cross-strata comprise repetitive laminations that are a few millimeters thick and typically sub-parallel. Cross-laminations downlap onto the underlying bounding surface with an asymptotic profile and are truncated at their top by an overlying bounding surface. Palaeocurrent analysis based on measurements of 117 foreset azimuths indicate a wind regime that drove dune migration towards the northeast. Cross sets are separated by erosional bounding surfaces, which are interpreted to represent interdune surfaces, which were formed by migrating dunes as they climbed over the stoss slope of a preceding dune, eroding its stoss and upper part of the lee slope. From analysis of the sedimentary architecture, and comparison with terrestrial aeolian strata, we interpret the Stimson formation to represent sands deposited in a dry-aeolian dune system. In summary, sedimentary observations by the Curiosity rover record a diverse range of palaeoenvironments and a rich geological history in strata preserved in lower Aeolis Mons.

43 CFR 4.1394 - Burden of proof.

Code of Federal Regulations, 2010 CFR

2010-10-01

... review, OSM shall have the burden of going forward to establish a prima facie case and the person who... review, that person shall have the burden of going forward to establish a prima facie case and the...

43 CFR 4.1394 - Burden of proof.

Code of Federal Regulations, 2011 CFR

2011-10-01

... review, OSM shall have the burden of going forward to establish a prima facie case and the person who... review, that person shall have the burden of going forward to establish a prima facie case and the...

Evolution of fluvial styles in the Eocene Wasatch Formation, Powder River Basin, Wyoming

USGS Publications Warehouse

Warwick, Peter D.; Flores, Romeo M.; Ethridge, Frank G.; Flores, Romeo M.

1987-01-01

Vertical and lateral facies changes in the lower part of the Eocene Wasatch Formation in the Powder River Basin, Wyoming represent an evolution of fluvial systems that varied from meandering to anastomosing. The meandering facies in the lower part of the study interval formed in a series of broad meanderbelts in a northnorthwestflowing system. Upon abandonment this meanderbelt facies served as a topographic high on which a raised or ombrotrophic Felix peat swamp developed. Peat accumulated until compaction permitted encroachment of crevasse splays from an adjoining transitional facies which consists of deposits of a slightly sinuous fluvial system. Crevasse splays eventually prograded over the peat swamp that was partly covered by lakes. Bifurcation, reunification, and transformation of crevasse channels into major conduits produced an anastomosing system that was characterized by diverging and converging channels separated by floodbasins drowned by lakes and partly covered swamps.

Secondary carbonate porosity as related to early teritiary depositional facies, Zelten field, Libya

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bebout, D.G.; Pendexter, C.

1975-04-01

Production from the Zelten field, Libya, is from the highly porous shelf limestones of the Zelten Member (Main Pay) of the Paleocene and lower Eocene Ruaga Limestone. Fifteen facies are recognized, mapped, and predicted. Seven of the facies comprise the larger part of the Zelten Member. These include miliolid-foraminiferal micrite, argillaceous bryozoan/echinoid micrite, argillaceous-molluscan micrite, coralgal micrite. Discocyclina-foraminiferal calcarenite, foraminiferal calcarenite and micrite, and Discocyclina-foraminiferal micrite. In the Zelten field secondary porosity is recorded as much as 40%; this porosity is related to the original depositional fabric of the sediment and, therefore, is facies controlled. Porosity is highest in themore » coralgal micrite and Discocyclina-foraminiferal calcarenite, which together form a NW.-SE. trend across the N. part of the field, and in the formaniniferal calcarenite and micrite. (10 refs.)« less

Redefining the Repertoire of Reluctant Readers at the Secondary School Level.

ERIC Educational Resources Information Center

Armstead, Major, Jr.

An inservice program designed to assist teachers to develop instructional strategies for high school students with poor cognitive skills is described in this paper. The discussion focuses on the employment of a "prima-facie analysis technique" designed to give the teacher and student immediate feedback about the student's reading behavior, to…

Palynological and sedimentary analysis of the Igarapé Ipiranga and Querru 1 outcrops of the Itapecuru Formation (Lower Cretaceous, Parnaíba Basin), Brazil

NASA Astrophysics Data System (ADS)

Ferreira, Neila N.; Ferreira, Elizabete P.; Ramos, Renato R. C.; Carvalho, Ismar S.

2016-03-01

The siliciclastic sediments of the Itapecuru Formation occur in a large area of the Parnaíba Basin and its deposits crop out along the Itapecuru River, in Maranhão State, northern Brazil. The palynological analysis of the Igarapé Ipiranga and Querru 1 outcrops strata yields a rich and diversified data. The presence of index-palynofloras in assemblages allows the identification of the Complicatisaccus cearensis Zone, of Late Aptian-Early Albian age. Terrestrial palynomorphs are abundant in the assemblages, being represented by bryophytes and pteridophytes, especially perisporate trilete spores (Crybelosporites and Perotrilites), and gymnosperms and angiosperms (Afropollis and Elaterosporites). The composition of palynological assemblages suggests the presence of moist soils for both outcrops. Acritarchs were recovered in the Querru 1 outcrop, which suggest a marine setting supporting a tidal flat environment indicated by facies associations. Furthermore, reworked Paleozoic palynomorphs were observed in the Querru 1 outcrop. The microflora from Igarapé Ipiranga outcrop suggests terrestrial environment corroborating with floodplain environment indicated by facies association.

Regional metamorphism in the Condrey Mountain Quadrangle, north-central Klamath Mountains, California

USGS Publications Warehouse

Hotz, Preston Enslow

1979-01-01

A subcircular area of about 650 km 2 in northern California and southwestern Oregon is occupied by rocks of the greenschist metamorphic facies called the Condrey Mountain Schist. This greenschist terrane is bordered on the east and west by rocks belonging to the amphibolite metamorphic facies that structurally overlie and are thrust over the Condrey Mountain Schist. The amphibolite facies is succeeded upward by metavolcanic and metasedimentary rocks belonging to the greenschist metamorphic facies. The Condrey Mountain Schist is composed predominantly of quartz-muscovite schist and lesser amounts of actinolite-chlorite schist formed by the metamorphism of graywacke and spilitic volcanic rocks that may have belonged to the Galice Formation of Late Jurassic age. Potassium-argon age determinations of 141?4 m.y. and 155?5 m.y. obtained on these metamorphic rocks seem to be incompatible with the Late Jurassic age usually assigned the Galice. The rocks that border the amphibolite facies are part of an extensive terrane of metavolcanic and metasedimentary rocks belonging to the western Paleozoic and Triassic belt. The metavolcanic rocks include some unmetamorphosed spilite but are mostly of the greenschist metamorphic facies composed of oligoclase (An15-20) and actinolite with subordinate amounts of chlorite and clinozoisiteepidote. The interbedded sedimentary rocks are predominantly argillite and slaty argillite, less commonly siliceous argillite and chert, and a few lenticular beds of marble. On the south, high-angle faults and a tabular granitic pluton separate the greenschist metavolcanic terrane from the amphibolite facies rocks; on the east, nonfoliated amphibolite is succeeded upward, apparently conformably, by metasedimentary rocks belonging to the greenschist metavolcanic terrane. In the southern part of Condrey Mountain quadrangle, an outlier of a thrust plate composed of the Stuart Fork Formation overlies the metavolcanic and metasedimentary rocks. The Stuart Fork in this region is composed of siliceous phyllite and phyllitic quartzite and is believed to be the metamorphosed equivalent of rocks over which it is thrust. In the Yreka-Fort Jones area, potassium-argon determinations on mica from the blueschist facies in the Stuart Fork gave ages of approximately 220 m.y. (Late Triassic) for the age of metamorphism. Rocks of the amphibolite facies structurally overlie the Condrey Mountain Schist along a moderate to steeply dipping thrust fault. The amphibolite terrane is composed of amphibolite and metasedimentary rocks in approximately equal amounts accompanied by many bodies of serpentinite and a number of gabbro and dioritic plutons. Most of the amphibolite is foliated, but some is nonfoliated; the nonfoliated amphibolite has an amphibolite mineralogy and commonly a relict volcanic rock texture. The nonfoliated amphibolite occurs on the southern and eastern borders of the amphibolite terrane between the areas offoliated amphibolite and the overly ing metavolcanic and metasedimentary rocks. Hornblende and plagioclase (An30-35) are the characteristic minerals, indicating that the rocks are of the almandine-amphibolite metamorphic facies. The metasedimentary rocks interbedded with the amphibolites include siliceous schist and phyllite, minor quartzite, and subordinate amounts of marble. Potassium-argon age dates obtained on hornblende from foliated amphibolite yield ages of 146?4 and 148? 4 m.y., suggesting a Late Jurassic metamorphic episode. Mafic and ultramafic rocks are widespread in the amphibolite terrane but are almost entirely absent from the area of greenschist facies metavolcanic and metasedimentary rocks. The ultramafic rocks, predominantly serpentinite, occur as a few large bodies and many small tabular concordant bodies interleaved with the foliated rocks. The ultramafic rocks include harzburgite and d1lIlite and their serpentinized equivalents. In the Condrey Mountain quadrangle, probably more t

Anatomy of a cyclically packaged Mesoproterozoic carbonate ramp in northern Canada

NASA Astrophysics Data System (ADS)

Sherman, A. G.; Narbonne, G. M.; James, N. P.

2001-03-01

Carbonates in the upper member of the Mesoproterozoic Victor Bay Formation are dominated by lime mud and packaged in cycles of 20-50 m. These thicknesses exceed those of classic shallowing-upward cycles by almost a factor of 10. Stratigraphic and sedimentological evidence suggests high-amplitude, high-frequency glacio-eustatic cyclicity, and thus a cool global climate ca. 1.2 Ga. The Victor Bay ramp is one of several late Proterozoic carbonate platforms where the proportions of lime mud, carbonate grains, and microbialites are more typical of younger Phanerozoic successions which followed the global waning of stromatolites. Facies distribution in the study area is compatible with deposition on a low-energy, microtidal, distally steepened ramp. Outer-ramp facies are hemipelagic lime mudstone, shale, carbonaceous rhythmite, and debrites. Mid-ramp facies are molar-tooth limestone tempestite with microspar-intraclast lags. In a marine environment where stromatolitic and oolitic facies were otherwise rare, large stromatolitic reefs developed at the mid-ramp, coeval with inner-ramp facies of microspar grainstone, intertidal dolomitic microbial laminite, and supratidal evaporitic red shale. Deep-subtidal, outer-ramp cycles occur in the southwestern part of the study area. Black dolomitic shale at the base is overlain by ribbon, nodular, and carbonaceous carbonate facies, all of which exhibit signs of synsedimentary disruption. Cycles in the northeast are shallow-subtidal and peritidal in character. Shallow-subtidal cycles consist of basal deep-water facies, and an upper layer of subtidal molar-tooth limestone tempestite interbedded with microspar calcarenite facies. Peritidal cycles are identical to shallow-subtidal cycles except that they contain a cap of dolomitic tidal-flat microbial laminite, and rarely of red shale sabkha facies or of sandy polymictic conglomerate. A transect along the wall of a valley extending 8.5 km perpendicular to depositional strike reveals progradation of inner-ramp tidal flats over outer- and mid-ramp facies during shoaling. The maximum basinward progradation of peritidal facies coincides with a zone of slope failure that may have promoted the development of the stromatolitic reefs. The sea-level history of the Victor Bay Formation is represented by three hectometre-scale sequences. An initial flooding event resulted in deposition of the lower Victor Bay shale member. Upper-member carbonate cycles were then deposited during highstand. Mid-ramp slumping was followed by late-highstand reef development. The second sequence began with development of an inner-ramp lowstand unconformity and a thick mid-ramp lowstand wedge. A second transgression promoted a more modest phase of reef development at the mid-ramp and shallow-water deposition continued inboard. A third and final transgressive episode eventually led to flooding of the backstepping ramp. Overall consistent cycle thickness and absence of truncated cycles, as well as the high rate and amount of creation of accommodation space, suggest that the periodicity and amplitude of sea-level fluctuation were relatively uniform, and point to a eustatic rather than tectonic mechanism of relative sea-level change. High-amplitude, high-frequency eustatic sea-level change is characteristic of icehouse worlds in which short-term, large-scale sea-level fluctuations accompany rapidly changing ice volumes affected by Milankovitch orbital forcing. Packaging of cyclic Upper Victor Bay carbonates therefore supports the hypothesis of a late Mesoproterozoic glacial period, as proposed by previous workers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cross, S.L.; Lighty, R.G.

Coral-rudist reefs of the Lower Cretaceous Mural limestone, southeastern Arizona, show a pronounced relationship between specific reef facies, primary porosity, and early submarine diagenesis. These large open-shelf reefs differ from the well-studied low-relief rudist buildups, and provide an alternate analog for many Cretaceous reef reservoirs. Arizona buildups have diverse corals, high depositional relief, and a well-developed facies zonation from fore reef to back reef: skeletal grainstone talus, muddy fore reef with branching and lamellar corals, massive reef crest with abundant lamellar corals and sandy matrix, protected thickets of delicate branching corals and large rudist mounds, and a wide sediment apronmore » of well-washed coral, rudist, and benthic foraminiferal sands. These well-exposed outcrops permit a detailed facies comparison of primary interparticle porosity. Porosity as high as 40% in grainstones was occluded by later subsurface cements. Reef-framework interparticle porosity was negligible because fore-reef coral and back-reef rudist facies were infilled by muds, and high-energy reef-crest frameworks were filled by peloidal submarine cement crusts and muddy skeletal sands. These thick crusts coated lamellar corals in cryptic and open reef-crest areas, and are laminated with ripple and draped bed forms that suggest current influence. Similar peloidal crusts and laminated textures are common magnesium-calcite submarine cement features in modern reefs. By documenting specific facies control on early cementation and textural variability, patterns of late-stage subsurface diagenesis and secondary porosity may be more easily explained for Cretaceous reef reservoirs. Significant primary porosity might be retained between sands in back-reef facies and within coral skeletons.« less

Kimberlites of the Man craton, West Africa

NASA Astrophysics Data System (ADS)

Skinner, E. M. W.; Apter, D. B.; Morelli, C.; Smithson, N. K.

2004-09-01

The Man craton in West Africa is an Archaean craton formerly joined to the Guyana craton (South America) that was rifted apart in the Mesozoic. Kimberlites of the Man craton include three Jurassic-aged clusters in Guinea, two Jurassic-aged clusters in Sierra Leone, and in Liberia two clusters of unknown age and one Neoproterozoic cluster recently dated at ∼800 Ma. All of the kimberlites irrespective of age occur as small pipes and prolific dykes. Some of the Banankoro cluster pipes in Guinea, the Koidu pipes in Sierra Leone and small pipes in the Weasua cluster in Liberia contain hypabyssal-facies kimberlite and remnants of the so-called transitional-facies and diatreme-facies kimberlite. Most of the Man craton kimberlites are mineralogically classified as phlogopite kimberlites, although potassium contents are relatively low. They are chemically similar to mica-poor Group 1A Southern African examples. The Jurassic kimberlites are considered to represent one province of kimberlites that track from older bodies in Guinea (Droujba 153 Ma) to progressively younger kimberlites in Sierra Leone (Koidu, 146 Ma and Tongo, 140 Ma). The scarcity of diatreme-facies kimberlites relative to hypabyssal-facies kimberlites and the presence of the so-called transitional-facies indicate that the pipes have been eroded down to the interface between the root and diatreme zones. From this observation, it is concluded that extensive erosion (1-2 km) has occurred since the Jurassic. In addition to erosion, the presence of abundant early crystallizing phlogopite is considered to have had an effect on the relatively small sizes of the Man craton kimberlites.

Mid-Dinantian Waulsortian buildups in the Dublin Basin, Ireland

NASA Astrophysics Data System (ADS)

Somerville, Ian D.; Strogen, Peter; Jones, Gareth Ll.

1992-08-01

The sedimentary history and biostratigraphic setting of Waulsortian carbonate buildups of the Feltrim Limestone Formation (late Courceyan to early Chadian) within the Dublin Basin are described. There is no unique precursor or successor facies to this formation, and the massive Waulsortian banks are composed predominantly of peloidal, skeletal wackestones and lime mudstones with packstones near the tops of banks. These banks form tabular bodies of moderate relief and are interbedded with thin shales and argillaceous crinoidal limestones of inter-bank facies. In the southwest of the basin inter-bank facies are rare and the bank facies have abundant stromatactis cavities, and uniquely at Roselawn a fauna of rugose corals. All buildups in the Dublin Basin have Phase C and/or D component assemblages of Lees and Miller (1985) and are interpreted as accumulating in moderately shallow-water depths, near or within the photic zone. Isopachs for the Feltrim Limestone Formation show a NE-SW-trending axial depocentre where the Waulsortian facies is in excess of 400 m thickness. Deposition appears to have taken place on this "double-sided" ramp, in a manner similar to the model of Lees (1982) for Belgium and southern Britain. Soft-sediment deformation such as large-scale slumping, shale-injections and water-escape structures, not previously recorded from these rocks is widespread. The upper surface of the Feltrim Limestone Formation is fissured and displays a prominent erosion surface. Termination of Waulsortian facies deposition and influx of terrigenous sediment was caused by rapid uplift, attributed to Chadian tectonism. However, eustatic sea-level fall cannot be ruled out as a partial cause of the demise of the Waulsortian.

Quantitative Characterisation and Analysis of Siliciclastic Fluvial Depositional Systems Using 3D Digital Outcrop Models

NASA Astrophysics Data System (ADS)

Burnham, Brian Scott

Outcrop analogue studies of fluvial sedimentary systems are often undertaken to identify spatial and temporal characteristics (e.g. stacking patterns, lateral continuity, lithofacies proportions). However, the lateral extent typically exceeds that of the exposure, and/or the true width and thickness are not apparent. Accurate characterisation of fluvial sand bodies is integral for accurate identification and subsequent modelling of aquifer and hydrocarbon reservoir architecture. The studies presented in this thesis utilise techniques that integrate lidar, highresolution photography and differential geospatial measurements, to create accurate three-dimensional (3D) digital outcrop models (DOMs) of continuous 3D and laterally extensive 2D outcrop exposures. The sedimentary architecture of outcrops in the medial portion of a large Distributive Fluvial System (DFS) (Huesca fluvial fan) in the Ebro Basin, north-east Spain, and in the fluvio-deltaic succession of the Breathitt Group in the eastern Appalachian Basin, USA, are evaluated using traditional sedimentological and digital outcrop analytical techniques. The major sand bodies in the study areas are quantitatively analysed to accurately characterise spatial and temporal changes in sand body architecture, from two different outcrop exposure types and scales. Several stochastic reservoir simulations were created to approximate fluvial sand body lithological component and connectivity within the medial portion of the Huesca DFS. Results demonstrate a workflow and current methodology adaptation of digital outcrop techniques required for each study to approximate true geobody widths, thickness and characterise architectural patterns (internal and external) of major fluvial sand bodies interpreted as products of DFSs in the Huesca fluvial fan, and both palaeovalleys and progradational DFSs in the Pikeville and Hyden Formations in the Breathitt Group. The results suggest key geostatistical metrics, which are translatable across any fluvial system that can be used to analyse 3D digital outcrop data, and identify spatial attributes of sand bodies to identify their genetic origin and lithological component within fluvial reservoir systems, and the rock record. 3D quantitative analysis of major sand bodies have allowed more accurate width vs. thickness relationships within the La Serreta area, showing a vertical increase in width and channel-fill facies, and demonstrates a 22% increase of in-channel facies from previous interpretations. Additionally, identification of deposits that are products of a nodal avulsion event have been characterised and are interpreted to be the cause for the increase in width and channel-fill facies. Furthermore, analysis of the Pikeville and Hyden Fms contain sand bodies of stacked distributaries and palaeovalleys, as previously interpreted, and demonstrates that a 3D spatial approach to determine basin-wide architectural trends is integral to identifying the genetic origin, and preservation potential of sand bodies of both palaeovalleys and distributive fluvial systems. The resultant geostatistics assimilated in the thesis demonstrates the efficacy of integrated lidar studies of outcrop analogues, and provide empirical relationships which can be applied to subsurface analogues for reservoir model development and the distribution of both DFS and palaeovalley depositional systems in the rock record.

47 CFR 1.54 - Petitions for forbearance must be complete as filed.

Code of Federal Regulations, 2010 CFR

2010-10-01

... requested relief. (b) Prima facie case. Petitions for forbearance must contain facts and arguments which, if... statement of the petitioner's prima facie case for relief. (3) Appendices that list: (i) The scope of relief...

10 CFR 205.192A - Burden of proof.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Remedial Order proceeding the ERA has the burden of establishing a prima facie case as to the validity of... supplemental information that may be made available under § 205.193A. (b) Once a prima facie case has been...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fouke, B.W.; Farmer, J.D.; Des Marais, D.J.

Petrographic and geochemical analyses of travertine-depositing hot springs at Angel Terrace, Mammoth Hot Springs, Yellowstone National Park, have been used to define five depositional facies along the spring drainage system. Spring waters are expelled in the vent facies at 71 to 73 C and precipitate mounded travertine composed of aragonite needle botryoids. The apron and channel facies (43--72 C) is floored by hollow tubes composed of aragonite needle botryoids that encrust sulfide-oxidizing Aquificales bacteria. The travertine of the pond facies (30--62 C) varies in composition from aragonite needle shrubs formed at higher temperatures to ridged networks of calcite and aragonitemore » at lower temperatures. Calcite ice sheets, calcified bubbles, and aggregates of aragonite needles (fuzzy dumbbells) precipitate at the air-water interface and settle to pond floors. The proximal-slope facies (28--54 C), which forms the margins of terracette pools, is composed of arcuate aragonite needle shrubs that create small microterracettes on the steep slope face. Finally, the distal-slope facies (28--30 C) is composed of calcite spherules and calcite feather crystals. Despite the presence of abundant microbial mat communities and their observed role in providing substrates for mineralization, the compositions of spring-water and travertine predominantly reflect abiotic physical and chemical processes. Vigorous CO{sub 2} degassing causes a +2 unit increase in spring water pH, as well as Rayleigh-type covariations between the concentration of dissolved inorganic carbon and corresponding {delta}{sup 13}C. Travertine {delta}{sup 13}C and {delta}{sup 18}O are nearly equivalent to aragonite and calcite equilibrium values calculated from spring water in the higher-temperature ({approximately}50--73 C) depositional facies. Conversely, travertine precipitating in the lower-temperature (<{approximately}50 C) depositional facies exhibits {delta}{sup 13}C and {delta}{sup 18}O values that are as much as 4% less than predicted equilibrium values. This isotopic shift may record microbial respiration as well as downstream transport of travertine crystals. Despite the production of H{sub 2}S and the abundance of sulfide-oxidizing microbes, preliminary {delta}{sub 34}S data do not uniquely define the microbial metabolic pathways present in the spring system. This suggests that the high extent of CO{sub 2} degassing and large open-system solute reservoir in these thermal systems overwhelm biological controls on travertine crystal chemistry.« less

Review of metamorphic and kinematic data from Internal Crystalline Massifs (Western Alps): PTt paths and exhumation history

NASA Astrophysics Data System (ADS)

Gasco, Ivano; Gattiglio, Marco; Borghi, Alessandro

2013-01-01

Detailed geological mapping combined with micro-structural and petrological investigation allowed to clarify the tectono-metamorphic relationships between continental and oceanic units transition in the Penninic domain of the Western Alps. The three study areas (Gressoney, Orco and Susa sections) take into consideration the same structural level across the axial metamorphic belt of the Western Italian Alps, i.e., a geological section across the Internal Crystalline Massifs vs Piedmont Zone boundary. The units outcropping in these areas can be grouped into two Tectonic Elements according to their tectono-metamorphic evolution. The Lower Tectonic Element (LTE) consists of the Internal Crystalline Massifs and the Lower Piedmont Zone (Zermatt-Saas like units), both showing well preserved eclogite facies relics. Instead, the Upper Tectonic Element (UTE) consists of the Upper Piedmont Zone (Combin like units) lacking evidence of eclogite facies relics. In the Lower Tectonic Element two main Alpine tectono-metamorphic stages were identified: M1/D1 developed under eclogite facies conditions and M2/D2 is related to the development of the regional foliation under greenschist to epidote-albite amphibolite facies conditions. In the Upper Tectonic Element the metamorphic stage M1/D1 developed under bluschist to greenschist facies conditions and M2/D2 stage under greenschist facies conditions. These two Tectonic Elements are separated by a tectonic contact of regional importance generally developed along the boundary between the Lower and the Upper Piedmont zone under greenschist facies conditions. PT data compared to geochronology indicate that the first exhumation of ICM can be explained by buoyancy forces acting along the subduction channel that occurred during the tectonic coupling between the continental and oceanic eclogite units. These buoyancy forces vanished at the base of the crust where the density difference between the subducted crustal units and the surroundings rocks is too low. A stage where compression prevails on the previous exhumation followed, which leads to the development of the regional foliation under greenschist to amphibolite facies metamorphic conditions. Further exhumation occurred after the M2/D2 stage at shallower crustal levels along conjugated shear zones leading to the development of a composite axial dome consisting of eclogite-bearing continental-oceanic units (ICM and Zermatt-Saas Zones) beneath greenschist ones (Combin Zone).

Modern foraminiferal facies in a subtropical estuarine channel, Bertioga, São Paulo, Brazil

USGS Publications Warehouse

Eichler, P.P.B.; Eichler, B.B.; De Miranda, L. B.; Rodrigues, A.R.

2007-01-01

Numerical analyses of modern foraminiferal abundance and environmental data from the Bertioga Channel (Sa??o Paulo, Brazil) reveal multiple biofacies within an overall paralic setting. Despite its fisheries, mariculture and attraction to tourists, the environmental state of Bertioga Channel remains poorly studied. The present investigation is an attempt to partly fill this gap; the parameters examined include depth, salinity, temperature, organic carbon, sulfur content and bottom sediment type. Muddy sediments with high organic carbon content derived from land drainage are found in the inner parts of the channel, whereas sandy sediment dominates the areas adjacent to the Atlantic Ocean. In the eastern entrance to the channel, sandy sediment contain species of Rotaliida from Facies 1 (including Elphidium discoidale, Elphidium poeyanum, Hanzawaia boueana, Pararotalia cananeiaensis and Nonionella atlantica), reflecting normal marine salinity. Sediments with high percentages of silt and clay in polyhaline and eurybaline environments of the eastern part and Itapanhau?? River contain Facies 2, which includes Ammonia beccarii and Pararotalia cananeiaensis. In the western entrance and central, western and eastern parts, where salinities vary from 18 to 30 psu and the sediments contain both low and high organic carbon, the foraminifera from Facies 3 are dominated by Quinqueloculina milletti, Arenoparrella mexicana, Pararotalia cananeiaensis, Ammonia beccarii, Buliminella elegantissima, Elphidium sp., Elphidium excavatum, Elphidium gunteri and Elphidium poeyanum. In mesohaline and polyhaline waters of the central part, the organic-carbon-rich silt and clay contain Facies 4, which includes Ammonia beccarii, Pararotalia cananeiaensis, Elphidium excavatum and Elphidium sp. Most of organic-carbon-enriched, silty-clay substrates that are subject to the highest fresh-water discharge and high bottom temperatures support two different assemblages: one of mostly Rotaliina and the other mostly of Textulariida (Facies 5 and 6). Facies 5 includes Ammonia beecarii, Elphidium excavatum, Arenoparrella mexicana, Haplophragmoides wilberti, Siphotrochammina lobata, Trochammina inflata and Trochammina sp., all of which are typical of mesohaline sites (mainly Crumau?? and Trindade rivers), and Facies 6 includes Bolivina sp., Ammoastuta salsa, Arenoparrella mexicana, Haplophragmoides wilberti and Trochammina sp., all of which are typical of oligohaline and mesohaline mangrove fringes. The foraminiferal species from the present study are frequently found in paralic environments in Brazil, western Africa and other estuaries around the world.

Sedimentology and geomorphology of the deposits from the August 2006 pyroclastic density currents at Tungurahua volcano, Ecuador.

PubMed

Douillet, Guilhem Amin; Tsang-Hin-Sun, Ève; Kueppers, Ulrich; Letort, Jean; Pacheco, Daniel Alejandro; Goldstein, Fabian; Von Aulock, Felix; Lavallée, Yan; Hanson, Jonathan Bruce; Bustillos, Jorge; Robin, Claude; Ramón, Patricio; Hall, Minard; Dingwell, Donald B

The deposits of the pyroclastic density currents from the August 2006 eruption of Tungurahua show three facies associations depending on the topographic setting: the massive, proximal cross-stratified, and distal cross-stratified facies. (1) The massive facies is confined to valleys on the slopes of the volcano. It contains clasts of >1 m diameter to fine ash material, is massive, and interpreted as deposited from dense pyroclastic flows. Its surface can exhibit lobes and levees covered with disk-shaped and vesicular large clasts. These fragile large clasts must have rafted at the surface of the flows all along the path in order to be preserved, and thus imply a sharp density boundary near the surface of these flows. (2) The proximal cross-stratified facies is exposed on valley overbanks on the upper part of the volcano and contains both massive coarse-grained layers and cross-stratified ash and lapilli bedsets. It is interpreted as deposited from (a) dense pyroclastic flows that overflowed the gentle ridges of valleys of the upper part of the volcano and (b) dilute pyroclastic density currents created from the dense flows by the entrainment of air on the steep upper flanks. (3) The distal cross-stratified facies outcrops as spatially limited, isolated, and wedge-shaped bodies of cross-stratified ash deposits located downstream of cliffs on valleys overbanks. It contains numerous aggrading dune bedforms, whose crest orientations reveal parental flow directions. A downstream decrease in the size of the dune bedforms, together with a downstream fining trend in the grain size distribution are observed on a 100-m scale. This facies is interpreted to have been deposited from dilute pyroclastic density currents with basal tractional boundary layers. We suggest that the parental flows were produced from the dense flows by entrainment of air at cliffs, and that these diluted currents might rapidly deposit through "pneumatic jumps". Three modes are present in the grain size distribution of all samples independently of the facies, which further supports the interpretation that all three facies derive from the same initial flows. This study emphasizes the influence of topography on small volume pyroclastic density currents, and the importance of flow transformation and flow-stripping processes.

Build-and-fill sequences: How subtle paleotopography affects 3-D heterogeneity of potential reservoir facies

USGS Publications Warehouse

McKirahan, J.R.; Goldstein, R.H.; Franseen, E.K.

2005-01-01

This study analyzes the three-dimensional variability of a 20-meter-thick section of Pennsylvanian (Missourian) strata over a 600 km2 area of northeastern Kansas, USA. It hypothesizes that sea-level changes interact with subtle variations in paleotopography to influence the heterogeneity of potential reservoir systems in mixed carbonate-silidclastic systems, commonly produdng build-and-fill sequences. For this analysis, ten lithofacies were identified: (1) phylloid algal boundstone-packstone, (2) skeletal wackestone-packstone, (3) peloidal, skeletal packstone, (4) sandy, skeletal grainstone-packstone, (5) oolite grainstone-packstone, (6) Osagia-brachiopod packstone, (7) fossiliferous siltstone, (8) lenticular bedded-laminated siltstone and fine sandstone, (9) organic-rich mudstone and coal, and (10) massive mudstone. Each facies can be related to depositional environment and base-level changes to develop a sequence stratigraphy consisting of three sequence boundaries and two flooding surfaces. Within this framework, eighteen localities are used to develop a threedimensional framework of the stratigraphy and paleotopography. The studied strata illustrate the model of "build-and-fill". In this example, phylloid algal mounds produce initial relief, and many of the later carbonate and silidclastic deposits are focused into subtle paleotopographic lows, responding to factors related to energy, source, and accommodation, eventually filling the paleotopography. After initial buildup of the phylloid algal mounds, marine and nonmarine siliciclastics, with characteristics of both deltaic lobes and valley fills, were focused into low areas between mounds. After a sea-level rise, oolitic carbonates formed on highs and phylloid algal facies accumulated in lows. A shift in the source direction of siliciclastics resulted from flooding or filling of preexisting paleotopographic lows. Fine-grained silidclastics were concentrated in paleotopographic low areas and resulted in clay-rich phylloid algal carbonates that would have made poor reservoirs. In areas more distant from silidclastic influx, phylloid algal facies with better reservoir potential formed in topographic lows. After another relative fall in sea level, marine carbonates and silidclastics were concentrated in paleotopographic low areas. After the next relative rise in sea level, there is little thickness or fades variation in phylloid algal limestone throughout the study area because: (1) substrate paleotopography had been subdued by filling, and (2) no silidclastics were deposited in the area. Widespread subaerial exposure and erosion during a final relative fall in sea level resulted in redevelopment of variable paleotopography. Build-and-fill sequences, such as these, are well known in other surface and subsurface examples. Initial relief is built by folding or faulting, differential compaction, erosion, or deposition of relief-building facies, such as phylloid algal and carbonate grainstone reservoir fades, or silidclastic wedges. Relief is filled through deposition of reservoir-fades siliciclastics, phylloid algal fades, and grainy carbonates, as well as nonreservoir facies, resulting in complex heterogeneity.

Lithofacies and sequence stratigraphic analysis of the Upper Jurassic siliciclastics in the eastern Kopet-Dagh Basin, NE Iran

NASA Astrophysics Data System (ADS)

Zand-Moghadam, Hamed; Moussavi-Harami, Reza; Mahboubi, Asadollah; Aghaei, Ali

2016-05-01

The Upper Jurassic (Oxfordian-Kimmeridgian) Mozduran Formation is the most important gas reservoirs of the northeast Iran. Siliciclastic facies of this formation in eastern most parts of the basin have not been studied yet. Therefore, four stratigraphic sections of Mozduran Formation have been selected in the Kole-Malekabad, Kale-Karab, Deraz-Ab and Karizak to interpret depositional history and analyze depositional sequences. Based on texture and sedimentary structures, 14 slilciclastic lithofacies were identified and classified into four categories, including conglomerate (Gms, Gp, Gt), sandstone (Sh, Sp, St, Sr, Sl, Sm, Se), mud rock (Fl) and intermediate sandstone-mud rock (Sr (Fl), Sr/Fl, Fl (Sr)). Identified lithofacies formed four architectural elements CH, SB, LA and FF. Lithofacies characteristics and architectural elements with mostly bimodal pattern of paleocurrents show that the majority of Mozduran lithofacies deposited in the coastal environment (tidal influence). Sequence stratigraphic analysis shows that the Kole-Malekabad section consists of two depositional sequences while other sections are characterized by three depositional sequences. The lower and upper sequence boundaries of the Mozduran Formation in all stratigraphic sections are SB1 that are distinguished by paleosol and sometime conglomerate horizons. Most of depositional sequences in studied sections are composed only of TST and HST. The TST deposits consist mostly of quartzarenite and litharenite petrofacies that have been deposited in the tidal zone. HST packages are mostly including mud rocks with interdeds of sandstone lithofacies that are deposited in supratidal setting. The LST facies is recognized only in the DS3 (equivalent to the second depositional sequences of the Kole-Malekabad), which consist of conglomerate facies. Instead, the Kole-Malekabad section is often composed of supratidal gypsiferrous shales, indicating sea level fall in the study area.

Development and application of laser microprobe techniques for oxygen isotope analysis of silicates, and, fluid/rock interaction during and after granulite-facies metamorphism, highland southwestern complex, Sri Lanka

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elsenheimer, D.W.

1992-01-01

The extent of fluid/rock interaction within the crust is a function of crustal depth, with large hydrothermal systems common in the brittle, hydrostatically pressured upper crust, but restricted fluid flow in the lithostatically pressured lower crust. To quantify this fluid/rock interaction, a Nd-YAG/CO[sub 2] laser microprobe system was constructed to analyze oxygen isotope ratios in silicates. Developed protocols produce high precision in [sigma][sup 18]O ([+-]0.2, 1[sigma]) and accuracy comparable to conventional extraction techniques on samples of feldspar and quartz as small as 0.3mg. Analysis of sub-millimeter domains in quartz and feldspar in granite from the Isle of Skye, Scotland, revealsmore » complex intragranular zonation. Contrasting heterogeneous and homogeneous [sigma][sup 18]O zonation patterns are revealed in samples <10m apart. These differences suggest fluid flow and isotopic exchange was highly heterogeneous. It has been proposed that granulite-facies metamorphism in the Highland Southwestern Complex (HSWC), Sri Lanka, resulted from the pervasive influx of CO[sub 2], with the marbles and calc-silicates within the HSWC a proposed fluid source. The petrologic and stable isotopic characteristic of HSWC marbles are inconsistent with extensive decarbonation. Wollastonite calc-silicates occur as deformed bands and as post-metamorphis veins with isotopic compositions that suggest vein fluids that are at least in part magmatic. Post-metamorphic magmatic activity is responsible for the formation of secondary disseminated graphite growth in the HSWC. This graphite has magmatic isotopic compositions and is associated with vein graphite and amphibolite-granulite facies transitions zones. Similar features in Kerela Khondalite Belt, South India, may suggest a common metamorphic history for the two terranes.« less

Oil and gas geochemistry and petroleum systems of the Fort Worth Basin

USGS Publications Warehouse

Hill, R.J.; Jarvie, D.M.; Zumberge, J.; Henry, M.; Pollastro, R.M.

2007-01-01

Detailed biomarker and light hydrocarbon geochemistry confirm that the marine Mississippian Barnett Shale is the primary source rock for petroleum in the Fort Worth Basin, north-central Texas, although contributions from other sources are possible. Biomarker data indicate that the main oil-generating Barnett Shale facies is marine and was deposited under dysoxic, strong upwelling, normal salinity conditions. The analysis of two outcrop samples and cuttings from seven wells indicates variability in the Barnett Shale organic facies and a possibility of other oil subfamilies being present. Light hydrocarbon analyses reveal significant terrigenous-sourced condensate input to some reservoirs, resulting in terrigenous and mixed marine-terrigenous light hydrocarbon signatures for many oils. The light hydrocarbon data suggest a secondary, condensate-generating source facies containing terrigenous or mixed terrigenous-marine organic matter. This indication of a secondary source rock that is not revealed by biomarker analysis emphasizes the importance of integrating biomarker and light hydrocarbon data to define petroleum source rocks. Gases in the Fort Worth Basin are thermogenic in origin and appear to be cogenerated with oil from the Barnett Shale, although some gas may also originate by oil cracking. Isotope data indicate minor contribution of biogenic gas. Except for reservoirs in the Pennsylvanian Bend Group, which contain gases spanning the complete range of observed maturities, the gases appear to be stratigraphically segregated, younger reservoirs contain less mature gas, and older reservoirs contain more mature gas. We cannot rule out the possibility that other source units within the Fort Worth Basin, such as the Smithwick Shale, are locally important petroleum sources. Copyright ?? 2007. The American Association of Petroleum Geologists. All rights reserved.

[open quotes]Rejuvenation[close quotes] of a very mature productive area: Application of sequence stratigraphy, depositional facies and reservoir architectural studies in inactive old fields - Dorsal de Huincul - Neuquen Basin, Argentina

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kokogian, D.A.; Vasquez, J.R.

1996-01-01

The project objectives were to define the upside potential and identified drilling locations, both for exploratory and development wells, in Loma Negra-Nl-Huincul old fields, inactive due to pressure depletion Fields are located in Dorsal de Huincul area (Huincul Range) which is a highly complex structure associated with a major transtensive-transpressive wrench system. Several angular unconformities are very noticeable, having eroded hundreds of meters of the stratigraphic column. Study was focused on the fluvial-deltaic sediments of the Cuyo Group (Bajocian-Bathonian), the main productive levels in the area. An understanding of the stratigraphic units, visible at outcrop, seismic and well scales, providedmore » the appropriated framework for the analysis. Seismic facies, detailed log and core analysis allowed us to generate paleogeographic maps and predict the reservoir distribution into each individual stratigraphic unit, Fluvial channels, overbank, crevasses splay, mouth-bar, interdistributary and delta front facies were recognized. Finally, the integrated model was compared and adjusted with the outcrop data. As a result of this study, exploratory and development wells were proposed, being all of them productive either gas or oil. Several of the new drilled wells found new productive horizons with original reservoir pressure, proving the presence of different tanks predicted by the model. This fact encourages the evaluation of the whole adjacent areas. Summing up, this integrated approach using the best outputs of the geology and geophysics in subsurface as well as in surface has been proved as a powerful tool to explore and reactivate a very mature area.« less

{open_quotes}Rejuvenation{close_quotes} of a very mature productive area: Application of sequence stratigraphy, depositional facies and reservoir architectural studies in inactive old fields - Dorsal de Huincul - Neuquen Basin, Argentina

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kokogian, D.A.; Vasquez, J.R.

1996-12-31

The project objectives were to define the upside potential and identified drilling locations, both for exploratory and development wells, in Loma Negra-Nl-Huincul old fields, inactive due to pressure depletion Fields are located in Dorsal de Huincul area (Huincul Range) which is a highly complex structure associated with a major transtensive-transpressive wrench system. Several angular unconformities are very noticeable, having eroded hundreds of meters of the stratigraphic column. Study was focused on the fluvial-deltaic sediments of the Cuyo Group (Bajocian-Bathonian), the main productive levels in the area. An understanding of the stratigraphic units, visible at outcrop, seismic and well scales, providedmore » the appropriated framework for the analysis. Seismic facies, detailed log and core analysis allowed us to generate paleogeographic maps and predict the reservoir distribution into each individual stratigraphic unit, Fluvial channels, overbank, crevasses splay, mouth-bar, interdistributary and delta front facies were recognized. Finally, the integrated model was compared and adjusted with the outcrop data. As a result of this study, exploratory and development wells were proposed, being all of them productive either gas or oil. Several of the new drilled wells found new productive horizons with original reservoir pressure, proving the presence of different tanks predicted by the model. This fact encourages the evaluation of the whole adjacent areas. Summing up, this integrated approach using the best outputs of the geology and geophysics in subsurface as well as in surface has been proved as a powerful tool to explore and reactivate a very mature area.« less

Principal component analysis and hydrochemical facies characterization to evaluate groundwater quality in Varahi river basin, Karnataka state, India

NASA Astrophysics Data System (ADS)

Ravikumar, P.; Somashekar, R. K.

2017-05-01

The present study envisages the importance of graphical representations like Piper trilinear diagram and Chadha's plot, respectively to determine variation in hydrochemical facies and understand the evolution of hydrochemical processes in the Varahi river basin. The analytical values obtained from the groundwater samples when plotted on Piper's and Chadha's plots revealed that the alkaline earth metals (Ca2+, Mg2+) are significantly dominant over the alkalis (Na+, K+), and the strong acidic anions (Cl-, SO4 2-) dominant over the weak acidic anions (CO3 2-, HCO3 -). Further, Piper trilinear diagram classified 93.48 % of the samples from the study area under Ca2+-Mg2+-Cl--SO4 2- type and only 6.52 % samples under Ca2+-Mg2+-HCO3 - type. Interestingly, Chadha's plot also demonstrated the dominance of reverse ion exchange water having permanent hardness (viz., Ca-Mg-Cl type) in majority of the samples over recharging water with temporary hardness (i.e., Ca-Mg-HCO3 type). Thus, evaluation of hydrochemical facies from both the plots highlighted the contribution from the reverse ion exchange processes in controlling geochemistry of groundwater in the study area. Further, PCA analysis yielded four principal components (PC1, PC2, PC3 and PC4) with higher eigen values of 1.0 or more, accounting for 65.55, 10.17, 6.88 and 6.52 % of the total variance, respectively. Consequently, majority of the physico-chemical parameters (87.5 %) loaded under PC1 and PC2 were having strong positive loading (>0.75) and these are mainly responsible for regulating the hydrochemistry of groundwater in the study area.

Characterization and origin of spongillite-hosting sediment from João Pinheiro, Minas Gerais, Brazil

NASA Astrophysics Data System (ADS)

Almeida, A. C. S.; Varajão, A. F. D. C.; Gomes, N. S.; Varajão, C. A. C.; Volkmer-Ribeiro, C.

2010-03-01

Spongillite from João Pinheiro, Minas Gerais, Brazil is mainly known for its use in brick production and in the refractory industry. Very few studies have focused on its geological context. Spongillite-rich deposits occur in shallow ponds on a karstic planation surface developed on rocks of the Neoproterozoic São Francisco Supergroup. Cenozoic siliciclastic sediments are related to this surface. A field study of these deposits and analysis of multispectral images showed a SE-NW preferential drainage system at SE, suggesting that Mesozoic Areado Group sandstones were the source area of the spongillite-hosting sediments. Mineralogical and textural characterization by optical microscopic analysis, X-ray diffraction (XRD), differential and gravimetric thermal analysis (DTA-GTA), infrared spectroscopy (IR) and scanning electron microscopy (SEM) of seven open-pit spongillite-rich deposits (Avião, Carvoeiro, Vânio, Preguiça, Divisa, Severino, Feijão) showed a sedimentological similarity between the deposits. They are lens-shaped and are characterized at the bottom by sand facies, in the middle by spicules-rich muddy-sand facies and at the top by organic matter-rich muddy-sand facies. Petrographically, the spongillite-hosting sediments and the siliclastic sediments of the Areado Group show detrital phases with similar mineralogical and textural features, such as the presence of well-sorted quartz grains and surface features of abrasion typical of aeolian reworking that occurred in the depositional environment in which the sandstones of the Areado Group were formed. Detrital heavy minerals, such as staurolite, zircon, tourmaline, and clay minerals, such as kaolinite, low amounts of illite, scarce chlorite and mixed-layer chlorite/smectite and illite/smectite occur in the spongillite-hosting sediments and in sandstones from the Areado Group. In both formations, staurolite has similar chemical composition. These mineralogical and textural features show that the sediments of the Areado Group constitute the main source of the pond sediments that host spongillite.

The changing seascape of Galway Bay, Western Ireland

NASA Astrophysics Data System (ADS)

Mc Cullagh, D.; Benetti, S.; Plets, R. M. K.; Edwards, R.

2016-12-01

During the late Quaternary significant environmental and relative sea-level variations have contributed to shaping present day coastlines. This is particularly evident along formerly glaciated continental margins. Strong evidence of these changes are recorded in Galway Bay, Western Ireland. This research uses a multidisciplinary approach. Seismic and multibeam data, sedimentological, micropaleontological, geochemical analysis and 15 radiocarbon dates of sediment cores from the bay provide post last glacial maximum (LGM) sea level and environmental reconstructions for the region. The acoustic stratigraphy of the bay includes 3 seismic units: the deepest unit represents the acoustic basement, composed of limestone and granite bedrock; the middle unit is composed of the oldest preserved sediments, deposited during and after the LGM, and interpreted to be glacial till. The uppermost unit represents deposition and reworking after glacial retreat. The erosive action of the ice sheet that extended off the Irish coast is thought to be responsible for the removal and reworking of all sediments older that the LGM. In the sediment cores, three main lithofacies were identified: 1) a sandy silt and clay facies, 2) a distinct shell hash interlayer and, 3) a fine silty sand facies. These 3 facies are found within the uppermost seismic unit, and initial radiocarbon dating of shells in 4 cores, constrain these sediments and the uppermost seismic unit to the Holocene. Preliminary qualitative analysis on foraminifera from several cores shows a general trend of progression from estuarine to open marine conditions, inferred from indicator species. This trend is supported by X-ray fluorescence (XRF) analysis which shows increased ratios of Cl/Fe in younger deposits. Constraining dates on sea level variations in the region will be added to the sea level database for Ireland and possibly used to adjust the existing relative sea level models. These are important for understating past sea level variations and modelling future trends.

Igneous and metamorphic petrology in the field: a problem-based, writing-intensive alternative to traditional classroom petrology

NASA Astrophysics Data System (ADS)

DeBari, S. M.

2011-12-01

The Geology Department at Western Washington University (~100 geology majors) offers field and classroom versions of its undergraduate petrology course. This is a one-quarter course (igneous and metamorphic petrology) with mineralogy as a prerequisite. The field version of the course is offered during the three weeks prior to fall quarter and the classroom version is offered in spring quarter. We take 15-20 students around the state of Washington, camping at different outcrop sites where students integrate observational skills, petrologic knowledge, and writing. Petrogenetic associations in various tectonic settings provide the theme of the course. We compare ophiolites vs. arc sequences (volcanic, plutonic, and metamorphic rocks), S- vs. I-type granitoids (plutonic rocks and associated metamorphic rocks), Barrovian vs. Buchan vs. subduction zone metamorphism of different protoliths, and flood-basalt vs. active-arc volcanism. Some basics are covered in the first day at WWU, followed by 17 days of field instruction. Lecture is integrated with outcrop study in the field. For example, students will listen to a lecture about magma differentiation processes as they examine cumulate rocks in the Mt. Stuart batholith, and a lecture about metamorphic facies as they study blueschist facies rocks in the San Juan Islands. Students study multiple outcrops around a site for 1-4 days. They then use their observations (sketches and written descriptions of mineral assemblages, rock types, rock textures, etc.) and analysis techniques (e.g. geochemical data plotting, metamorphic protolith analysis) to write papers in which the data are interpreted in terms of a larger tectonic problem. In advance of the writing process, students use group discussion techniques such as whiteboarding to share their observational evidence and explore interpretations. Student evaluations indicate that despite the intense pace of the course, they enjoy it more. Students also feel that they retain more material for future classes. The undivided attention, immediate writing/reflection, and repetition of skills in different settings reinforce material. Because of students' higher level of engagement, more of them pursue advanced classes or independent studies. A corollary benefit is that students form strong bonds with their cohort group, providing mutual support as they continue through the program and ultimately improving their field camp experience. Final exam scores are equal to or better than in the traditional class, and some basic skills, such the ability to make observations at a variety of scales in sketches and writing, are better. Students can also better distinguish between observation and inference in report writing. Finally, students can apply their theoretical understanding of petrologic processes (e.g. magma differentiation, metamorphic facies progressions) to real rocks in a more sophisticated way using evidence.

Recent benthic foraminifera assemblages from mangrove swamp and channels of Abu Dhabi (UAE)

NASA Astrophysics Data System (ADS)

Fiorini, Flavia; Lokier, Stephen W.; Odeh, Weaam A. S. Al; Paul, Andreas; Song, Jianfeng; Freeman, Mark; Michel, Françoise

2017-04-01

Zonation of Recent mangrove environments can be defined using benthic foraminifera, however, little is known about foraminifera from mangrove environments of the Persian/Arabian Gulf. The objective of this study is to produce a detailed micropaleontological and sedimentological analysis to identify foraminiferal associations from mangrove swamps and channels located on the eastern side of Abu Dhabi Island (UAE). Detailed sediment sampling collection in mangal environments of Eastern Abu Dhabi was carried out to assess the distribution of benthic foraminifera in different sedimentary facies in the mangal and in the surrounding natural environments of the upper and lower intertidal area (mud flats and channels). A 100 m transect across a natural channel in a mangal on the eastern side of Abu Dhabi Island was sampled in detail for sedimentological and foraminiferal analysis. Forty-seven samples were collected at 2 meter intervals along the transect in a number of different sedimentary facies including; fine sediment in areas exposed during low tide and close to mangrove trees (Avicennia marina), fine sediment rich in leaf material, coarse sediment in channels, and coarse sediments with a shell lag. At each sampling location environmental parameters were recorded, including water depth, salinity, temperature and pH. Samples collected for foraminiferal analysis were stained in rose Bengal in order to identify living specimens. Samples collected on the mud flat at the margin of the channel show a living foraminiferal assemblage characterised by abundant foraminifera belonging to the genera Ammonia, Elphidium, Cribroelphidium, Triloculina, Quinqueloculina, Sigmoilinita, Spiroloculina, Peneroplis and Spirolina. Samples collected in the lower (wet) intertidal area close to Avicennia marina roots, presented a low-diversity assemblage mostly comprising small-sized opportunistic foraminifera of the genera Ammonia and Cribroelphidium along with rare Triloculina and Quinqueloculina. Samples from the upper intertidal areas (often dry) close to Avicennia marina roots and leaf material, produced an assemblage exclusively composed of small-sized opportunistic Ammonia and Cribroelphidium, together with abundant specimensof agglutinated foraminifera belonging to the genera Trochammina. The samples collected in the higher energy settings (channels) were rich in foraminiferal tests, rare living forms were found in the coarser grained facies. The more abundant genera of foraminifera in these facies were miliolids belonging to the genera Triloculina, Quinqueloculina, Sigmoilina and epiphytic larger benthic foraminifera belonging to the genera Peneroplis, Spirolina and Sorites. The distribution of Recent benthic foraminifera from the mangrove environments of the Abu Dhabi region present a powerful tool for constructing a zonation of marine coastline environments and can be employed as a modern analogue for interpreting the depositional environment of ancient coastline sediments.

Arch fingerprints, hypotonia, and areflexia associated with X linked mental retardation.

PubMed Central

Stevenson, R E; Häne, B; Arena, J F; May, M; Lawrence, L; Lubs, H A; Schwartz, C E

1997-01-01

A syndrome with distinctive facies, poor muscle tone, absent deep tendon reflexes, tapered fingers, excessive fingerprint arches, genu valgum and mild-moderate mental retardation has occurred in four males in two generations of a white family of European ancestry. The facies are characterised by square configuration, tented upper lip, and thickening of the helices, upper eyelids, and alae nasi. At birth and at maturity, growth (head circumference, height, weight) of affected males is comparable to or greater than unaffected male sibs. Moderate impairment of cognitive function was documented (IQ scores between 40-51). Carriers show no heterozygote manifestations. This X linked condition appears to be different from other syndromes with mental retardation, although there are certain similarities with the alpha thalassaemia-mental retardation syndrome (ATR-X). Linkage analysis found tight linkage to DXS1166 and DXS995 in Xq13 and Xq21 respectively. Images PMID:9192265

Arch fingerprints, hypotonia, and areflexia associated with X linked mental retardation.

PubMed

Stevenson, R E; Häne, B; Arena, J F; May, M; Lawrence, L; Lubs, H A; Schwartz, C E

1997-06-01

A syndrome with distinctive facies, poor muscle tone, absent deep tendon reflexes, tapered fingers, excessive fingerprint arches, genu valgum and mild-moderate mental retardation has occurred in four males in two generations of a white family of European ancestry. The facies are characterised by square configuration, tented upper lip, and thickening of the helices, upper eyelids, and alae nasi. At birth and at maturity, growth (head circumference, height, weight) of affected males is comparable to or greater than unaffected male sibs. Moderate impairment of cognitive function was documented (IQ scores between 40-51). Carriers show no heterozygote manifestations. This X linked condition appears to be different from other syndromes with mental retardation, although there are certain similarities with the alpha thalassaemia-mental retardation syndrome (ATR-X). Linkage analysis found tight linkage to DXS1166 and DXS995 in Xq13 and Xq21 respectively.

Practical characterization of eolian reservoirs for development: Nugget Sandstone, Utah—Wyoming thrust belt

NASA Astrophysics Data System (ADS)

Lindquist, Sandra J.

1988-04-01

The Jurassic eolian Nugget Sandstone of the Utah-Wyoming thrust belt is a texturally heterogeneous formation with anisotropic reservoir inherited primarily from the depositional environment. Original reservoir quality has been reduced somewhat by cementation and slightly enhanced by dissolution. Low-permeability, gouge-filled micro-faults compartmentalize the formation, whereas intermittently open fractures provide effective permeability paths locally. Where productive, the Nugget Sandstone ranges from approximately 800 to 1050 ft (244-320 m) thick at subsurface depths of 7500 to 15,000 ft (2286-4572 m). Porosity ranges from several percent to 25%, and permeability covers five orders of magnitude from hundredths of milliDarcies to Darcies. Some Nugget reservoirs are fully charged with hydrocarbons. Different stratification types have unique depositional textures, primary and diagenetic mineralogies, and deformational fabrics resulting in characteristic porosity, permeability, permeability directionality, and pore geometry attributes. Such characteristics can be determined from core analysis, mercury injection, nuclear magnetic resonance, conventional log, dipmeter and production data. Nugget dune deposits (good reservoir facies) primarily consist of grainflow and wind-ripple cross-strata, the former of which have the better reservoir quality and the lesser heterogeneity in bedding texture. High-permeability facies are commonly affected by local quartz and nodular carbonate cementation, chlorite (and lesser illite) precipitation, and minor framework and cement dissolution. Gouge-filled micro-faults are the predominant deformational overprint. Interdune, sand-sheet, and other water-associated deposits (poor reservoir facies) are characterized by low-angle wind-ripple laminae and more irregular bedding, some of which is associated with damp or wet conditions. Water-associated Nugget stratification generally contains the finest grained depositional textures and has the poorest reservoir properties. These non-dune facies contain intergranular micritic carbonate and illite precipitates and are most affected by compaction and pressure solution phenomena. Open types of fractures are somewhat more likely in this lower permeability rock. Depositional models incorporating dune morphologies, facies distribution, permeability directionality, and theoretical concepts regarding dune migration through time are useful in delineating correlative intervals most likely to have continuity and potential communication of reservoir properties. Stratigraphic models can be adapted for reservoir simulation studies and also can be utilized in solving structural resolution problems if correlatable vertical sequences and relatively consistent cross-strata orientations exist.

Tidal-bundle sequences in the Jordan Sandstone (Upper Cambrian), southeastern Minnesota, U.S.A.: Evidence for tides along inboard shorelines of the Sauk Epicontinental Sea

USGS Publications Warehouse

Tape, C.H.; Cowan, Clinton A.; Runkel, Anthony C.

2003-01-01

This study documents for the first time tidal bundling in a lower Paleozoic sheet sandstone from the cratonic interior of North America, providing insights into the hydrodynamics of ancient epicontinental seas. The Jordan Sandstone (Upper Cambrian) in the Upper Mississippi Valley contains large-scale planar tabular cross-sets with tidal-bundle sequences, which were analyzed in detail at an exceptional exposure. Tidal-bundle sequences (neap-spring-neap cycles) were delineated by foreset thickening-thinning patterns and composite shale drapes, the latter of which represent accumulations of mud during the neap tides of neap-spring-neap tidal cycles. Fourier analysis of the bundle thickness data from the 26 measurable bundle sequences revealed cycles ranging from 15 to 34 bundles per sequence, which suggests a semidiurnal or mixed tidal system along this part of the Late Cambrian shoreline. We extend the tidal interpretation to widespread occurrences of the same facies in outcrops of lesser quality, where the facies is recognizable but too few bundles are exposed for tidal cycles to be measured. By doing so, this study shows that tidally generated deposits have a significant geographic and temporal extent in Upper Cambrian strata of central mid-continent North America. The deposition and preservation of tidal facies was related to the intermittent development of shoreline embayments during transgressions. The tidally dominated deposits filled ravined topographies that were repeatedly developed on the updip parts of the shoreface. Resulting coastal geomorphologies, accompanied perhaps by larger-scale changes in basinal conditions and/or configuration, led to changes in depositional conditions from wave-dominated to tide-dominated. Outcrops of the Jordan Sandstone tidal facies in the Upper Mississippi Valley represent the farthest inboard recorded transmission of ocean-generated tides in the Laurentian epicontinental seas, demonstrating that tidal currents were significant agents in the transport of sand along the far cratonic interior shorelines of Cambrian North America. The results of this study improve the facies-level understanding of the genesis of sheet sandstones. Furthermore, tidalites documented here occur in a specific position within a sequence stratigraphic architecture for the Jordan Sandstone. This provides a framework to compare these ancient deposits and processes to younger (e.g., Carboniferous) epicontinental systems where stratal and sediment dynamics are better documented. ?? 2003, SEPM (Society for Sedimentary Geology).

Hydroclimatic variability in the Levant during the early last glacial (∼ 117-75 ka) derived from micro-facies analyses of deep Dead Sea sediments

NASA Astrophysics Data System (ADS)

Neugebauer, I.; Schwab, M. J.; Waldmann, N. D.; Tjallingii, R.; Frank, U.; Hadzhiivanova, E.; Naumann, R.; Taha, N.; Agnon, A.; Enzel, Y.; Brauer, A.

2015-08-01

The new sediment record from the deep Dead Sea basin (ICDP core 5017-1) provides a unique archive for hydroclimatic variability in the Levant. Here, we present high-resolution sediment facies analysis and elemental composition by μXRF scanning of core 5017-1 to trace lake levels and responses of the regional hydroclimatology during the time interval from ca 117-75 ka, i.e. the transition between the last interglacial and the onset of the last glaciation. We distinguished six major micro-facies types and interpreted these and their alterations in the core in terms of relative lake level changes. The two end-member facies for highest and lowest lake levels are (a) up to several meters thick, greenish sediments of alternating aragonite and detrital marl laminae (aad) and (b) thick halite facies, respectively. Intermediate lake levels are characterised by detrital marls with varying amounts of aragonite, gypsum or halite, reflecting lower-amplitude, shorter-term variability. Two intervals of pronounced lake level drops occurred at ∼110-108 ± 5 and ∼93-87 ± 7 ka. They likely coincide with stadial conditions in the central Mediterranean (Melisey I and II pollen zones in Monticchio) and low global sea levels during MIS 5d and 5b. However, our data do not support the current hypothesis of an almost complete desiccation of the Dead Sea during the earlier of these lake level low stands based on a recovered gravel layer. Based on new petrographic analyses, we propose that, although it was a low stand, this well-sorted gravel layer may be a vestige of a thick turbidite that has been washed out during drilling rather than an in-situ beach deposit. Two intervals of higher lake stands at ∼108-93 ± 6 and ∼87-75 ± 7 ka correspond to interstadial conditions in the central Mediterranean, i.e. pollen zones St. Germain I and II in Monticchio, and GI 24 + 23 and 21 in Greenland, as well as to sapropels S4 and S3 in the Mediterranean Sea. These apparent correlations suggest a close link of the climate in the Levant to North Atlantic and Mediterranean climates during the time of the build-up of Northern Hemisphere ice shields in the early last glacial period.

An Excel Macro to Plot the HFE-Diagram to Identify Sea Water Intrusion Phases.

PubMed

Giménez-Forcada, Elena; Sánchez San Román, F Javier

2015-01-01

A hydrochemical facies evolution diagram (HFE-D) is a multirectangular diagram, which is a useful tool in the interpretation of sea water intrusion processes. This method note describes a simple method for generating an HFE-D plot using the spreadsheet software package, Microsoft Excel. The code was applied to groundwater from the alluvial coastal plain of Grosseto (Tuscany, Italy), which is characterized by a complex salinization process in which sea water mixes with sulfate or bicarbonate recharge water. © 2014, National GroundWater Association.

Stacking pattern and stratigraphic model of reservoirs from a modern analogue to ancient deltaic and siliciclastic deposits: Golfe du Lion, SE France

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tesson, M.; Bernard, G.; Georges, A.

1995-08-01

The {open_quotes}Golfe du Lion{close_quotes} Pleistocene shelf deposits are used as modern analogues of ancient deltaic and shallow water siliciclastic deposits. At least 6 cyclic superimposed sedimentary packages constituting a seaward thickening wedge are documented, including major progradational clinoforms units bounded by regional unconformities, with their updip terminations. Seismic correlations and geometry models, together with age dating and facies analysis of the uppermost units have been used at regional scale. They allowed to differentiate allocyclic from autocyclic events, to improve our knowledge of the nature of tectonic control on architecture, and to rely the different seismic units, inside the packages, tomore » the environmental changes from interglacial highstand to glacial lowstand in 4 to 5th order cycles. An alternative model of {open_quotes}forced regression{close_quotes} during sea level lowstand was documented and validated. The different illustrated sedimentary units, related to specific parts of the relative sea level curve along a short duration/high amplitude cycle, are: (i) the {open_quotes}forced regression{close_quotes} deposits (ii) the late lowstand massive sands onto the outer shelf (iii) the early transgressive backstepping (?) beach sands, (iii) the late transgressive backslapping parasequences. The sand content inferred from the seismic facies, comforted with the uppermost units facies from data cores, is in agreement with this model.« less

Depositional response to seagrass mortality along a low-energy, barrier-island coast: west-central Florida

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, M.W.; Hine, A.C.; David, R.A.

1985-01-01

Analysis of aerial photographs and surficial sediment samples from the northern islands of the west-central barrier system of Florida indicates that: (1) seagrass beds in the nearshore zone have controlled onshore/longshore sand transport, and (2) resulting sedimentary accumulations within nearshore seagrass beds make differentiation of nearshore and backbarrier facies difficult. Between 1957 and 1973, an extensive seagrass community occupying the nearshore zone off Anclote Key disappeared, thus allowing the sudden and rapid onshore and longshore transport of sand. The 1000 year old barrier island lengthened 30% by recurved spit growth in this very short period of time. Although there aremore » not direct observations, four possible causes of seagrass mortality have been postulated, and of these overgrazing as a result of the accelerated population growth of sea urchins (Lytechinus variegatus) seems to be the most likely cause. Because of the ability of seagrasses to trap fine-grained sediments, contribute organic matter, and provide for low-energy, sheltered, molluscan biocoenosis, there is little depositional difference between these nearshore and backbarrier/lagoonal facies. This work indicates that the development and destruction of benthic floral communities should be considered as a process that generates or accentuates episodicity/cyclicity in the sedimentary record. Additionally, such changes in these communities should be expected to present a blurred distinction between certain types of coastal sedimentary facies.« less

Effects of CO 2 on mechanical variability and constitutive behavior of the Lower Tuscaloosa formation, Cranfield Injection Site, USA

DOE PAGES

Rinehart, Alex J.; Dewers, Thomas A.; Broome, Scott T.; ...

2016-08-25

We characterize geomechanical constitutive behavior of reservoir sandstones at conditions simulating the “Cranfield” Southeast Regional Carbon Sequestration Partnership injection program. From two cores of Lower Tuscaloosa Formation, three sandstone lithofacies were identified for mechanical testing based on permeability and lithology. These include: chlorite-cemented conglomeratic sandstone (Facies A); quartz-cemented fine sandstone (Facies B); and quartz- and calcite-cemented very fine sandstone (Facies C). We performed a suite of compression tests for each lithofacies at 100 °C and pore pressure of 30 MPa, including hydrostatic compression and triaxial tests at several confining pressures. Plugs were saturated with supercritical CO 2-saturated brine. Chemical environmentmore » affected the mechanical response of all three lithofacies, which experience initial plastic yielding at stresses far below estimated in situ stress. Measured elastic moduli degradation defines a secondary yield surface coinciding with in situ stress for Facies B and C. Facies A shows measurable volumetric creep strain and a failure envelope below estimates of in situ stress, linked to damage of chlorite cements by acidic pore solutions. Furthermore, the substantial weakening of a particular lithofacies by CO 2 demonstrates a possible chemical-mechanical coupling during injection at Cranfield with implications for CO 2 injection, reservoir permeability stimulation, and enhanced oil recovery.« less

Comparative facies formation in selected coal beds of the Powder River Basin

USGS Publications Warehouse

Stanton, R.W.; Moore, Timothy A.; Warwick, Peter D.; Crowley, S.S.; Flores, Romeo M.; Flores, Romeo M.; Warwick, Peter D.; Moore, Timothy A.; Glass, Gary; Smith, Archie; Nichols, Douglas J.; Wolfe, Jack A.; Stanton, Ronald W.; Weaver, Jean

1989-01-01

Petrologic studies of thick coal beds [Warwick, 1985; Moore, 1986; Moore and others, 1986; Moore and others, 1987; Warwick and Stanton, in press], which build on sedimentological interpretations [Flores, this volume] of associated units, provide data to interpret and contrast the varieties of peat formation in the Powder River Basin. Detailed analyses of the composition of coal beds lead to more complete interpretations regarding the depositional environment on a regional and local scale. Our efforts in the Powder River Basin [areas A-D in fig. 1 of Flores, this volume] have resulted in a series of site-specific studies that interpret the types of peat formation from the arrangement of different facies which comprise the coal beds and from the spatial form of the coal beds.Our approach was to use a combination of megascopic criteria for facies sampling, and where only core was available, to analyze many interval samples to discriminate facies by their maceral composition. Coal beds in the Powder River Basin are composed of laterally continuous, compositional subunits of the bed (facies) that can be discerned most easily in weathered highwall exposures, less readily in fresh highwalls, and very poorly in fresh-cut core surfaces. In general, very low ash ( 

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glicken, H.

Large volcanic debris avalanches are among the world's largest mass movements. The rockslide-debris avalanche of the May 18, 1980, eruption of Mount St. Helens produced a 2.8 km/sup 3/ deposit and is the largest historic mass movement. A Pleistocene debris avalanche at Mount Shasta produced a 26 km/sup 3/ deposit that may be the largest Quaternary mass movement. The hummocky deposits at both volcanoes consist of rubble divided into (1) block facies that comprises unconsolidated pieces of the old edifice transported relatively intact, and (2) matrix facies that comprises a mixture of rocks from the old mountain and material pickedmore » up from the surrounding terrain. At Mount St. Helens, the juvenile dacite is found in the matrix facies, indicating that matrix facies formed from explosions of the erupting magma as well as from disaggregation and mixing of blocks. The block facies forms both hummocks and interhummock areas in the proximal part of the St. Helens avalanche deposit. At Mount St. Helens, the density of the old cone is 21% greater than the density of the avalanche deposit. Block size decreases with distance. Clast size, measured in the field and by sieving, coverages about a mean with distance, which suggests that blocks disaggregated and mixed together during transport.« less

Braided fluvial sedimentation in the lower paleozoic cape basin, South Africa

NASA Astrophysics Data System (ADS)

Vos, Richard G.; Tankard, Anthony J.

1981-07-01

Lower Paleozoic braided stream deposits from the Piekenier Formation in the Cape Province, South Africa, provide information on lateral and vertical facies variability in an alluvial plain complex influenced by a moderate to high runoff. Four braided stream facies are recognized on the basis of distinct lithologies and assemblages of sedimentary structures. A lower facies, dominated by upward-fining conglomerate to sandstone and mudstone channel fill sequences, is interpreted as a middle to lower alluvial plain deposit with significant suspended load sedimentation in areas of moderate to low gradients. These deposits are succeeded by longitudinal conglomerate bars which are attributed to middle to upper alluvial plain sedimentation with steeper gradients. This facies is in turn overlain by braid bar complexes of large-scale transverse to linguoid dunes consisting of coarse-grained pebbly sandstones with conglomerate lenses. These bar complexes are compared with environments of the Recent Platte River. They represent a middle to lower alluvial plain facies with moderate gradients and no significant suspended load sedimentation or vegetation to stabilize channels. These bar complexes interfinger basinward with plane bedded medium to coarse-grained sandstones interpreted as sheet flood deposits over the distal portions of an alluvial plain with low gradients and lacking fine-grained detritus or vegetation.

Sedimentary geology of the middle Carboniferous of the Donbas region (Dniepr-Donets Basin, Ukraine).

PubMed

van Hinsbergen, Douwe J J; Abels, Hemmo A; Bosch, Wolter; Boekhout, Flora; Kitchka, Alexander; Hamers, Maartje; van der Meer, Douwe G; Geluk, Mark; Stephenson, Randell A

2015-03-20

The Paleozoic Dniepr-Donets Basin in Belarus, Ukraine, and Russia forms a major hydrocarbon province. Although well- and seismic data have established a 20 km thick stratigraphy, field-studies of its sediments are scarce. The inverted Donbas segment (Ukraine) exposes the middle Carboniferous part of the basin's stratigraphy. Here, we provide detailed sedimentological data from 13 sections that cover 1.5 of the total of 5 km of the Bashkirian and Moscovian stages and assess the paleoenvironment and paleo-current directions. Middle Carboniferous deposition occurred in a shelf environment, with coal deposition, subordinate fluvial facies, and abundant lower and middle shoreface facies, comprising an intercalated package of potential source and reservoir rocks. Sedimentary facies indicate a paleodepth range from below storm wave base to near-coastal swamp environments. Sedimentation and subsidence were hence in pace, with subtle facies changes likely representing relative sea-level changes. Paleocurrent directions are remarkably consistently southeastward in time and space in the different sedimentary facies across the Donbas Fold Belt, illustrating a dominant sedimentary infill along the basin axis, with little basin margin influence. This suggests that the middle Carboniferous stratigraphy of the Dniepr-Donets basin to the northwest probably contains significant amounts of fluvial sandstones, important for assessing hydrocarbon reservoir potential.

Sedimentary geology of the middle Carboniferous of the Donbas region (Dniepr-Donets basin, Ukraine)

PubMed Central

van Hinsbergen, Douwe J. J.; Abels, Hemmo A.; Bosch, Wolter; Boekhout, Flora; Kitchka, Alexander; Hamers, Maartje; van der Meer, Douwe G.; Geluk, Mark; Stephenson, Randell A.

2015-01-01

The Paleozoic Dniepr-Donets Basin in Belarus, Ukraine, and Russia forms a major hydrocarbon province. Although well- and seismic data have established a 20 km thick stratigraphy, field-studies of its sediments are scarce. The inverted Donbas segment (Ukraine) exposes the middle Carboniferous part of the basin's stratigraphy. Here, we provide detailed sedimentological data from 13 sections that cover 1.5 of the total of 5 km of the Bashkirian and Moscovian stages and assess the paleoenvironment and paleo-current directions. Middle Carboniferous deposition occurred in a shelf environment, with coal deposition, subordinate fluvial facies, and abundant lower and middle shoreface facies, comprising an intercalated package of potential source and reservoir rocks. Sedimentary facies indicate a paleodepth range from below storm wave base to near-coastal swamp environments. Sedimentation and subsidence were hence in pace, with subtle facies changes likely representing relative sea-level changes. Paleocurrent directions are remarkably consistently southeastward in time and space in the different sedimentary facies across the Donbas Fold Belt, illustrating a dominant sedimentary infill along the basin axis, with little basin margin influence. This suggests that the middle Carboniferous stratigraphy of the Dniepr-Donets basin to the northwest probably contains significant amounts of fluvial sandstones, important for assessing hydrocarbon reservoir potential. PMID:25791400

Cataplectic facies: clinical marker in the diagnosis of childhood narcolepsy-report of two cases.

PubMed

Prasad, Manish; Setty, Gururaj; Ponnusamy, Athi; Hussain, Nahin; Desurkar, Archana

2014-05-01

Narcolepsy is a chronic disease and is commonly diagnosed in adulthood. However, more than half of the patients have onset of symptoms in childhood and/or adolescence. The full spectrum of clinical manifestations, namely excessive daytime sleepiness, cataplexy, hypnagogic hallucinations, and sleep paralysis, is usually not present at disease onset, delaying diagnosis during childhood. Mean delay in diagnosis since symptom onset is known to be several years. Initial manifestations can sometimes be as subtle as only partial drooping of eyelids leading to confusion with a myasthenic condition. We present two children who presented with "cataplectic facies," an unusual facial feature only recently described in children with narcolepsy with cataplexy. The diagnosis of narcolepsy was confirmed by multiple sleep latency test along with human leukocyte antigen typing and cerebrospinal fluid hypocretin assay. The diagnosis of narcolepsy with cataplexy at onset can be challenging in young children. With more awareness of subtle signs such as cataplectic facies, earlier diagnosis is possible. To date, only 11 children between 6 and 18 years of age presenting with typical cataplectic facies have been reported in the literature. We present two patients, one of whom is the youngest individual (4 years old) yet described with the typical cataplectic facies. Copyright © 2014 Elsevier Inc. All rights reserved.

Depositional environments and cyclicity of the Early Ordovician carbonate ramp in the western Tarim Basin (NW China)

NASA Astrophysics Data System (ADS)

Guo, Chuan; Chen, Daizhao; Song, Yafang; Zhou, Xiqiang; Ding, Yi; Zhang, Gongjing

2018-06-01

During the Early Ordovician, the Tarim Basin (NW China) was mainly occupied by an extensive shallow-water carbonate platform, on which a carbonate ramp system was developed in the Bachu-Keping area of the western part of the basin. Three well-exposed typical outcrop sections of the Lower Ordovician Penglaiba Formation were investigated in order to identify the depositional facies and to clarify origins of meter-scale cycles and depositional sequences, thereby the platform evolution. Thirteen lithofacies are identified and further grouped into three depositional facies (associations): peritidal, restricted and open-marine subtidal facies. These lithofacies are vertically stacked into meter-scale, shallowing-upward peritidal and subtidal cycles. The peritidal cycles are mainly distributed in the lower and uppermost parts of the Penglaiba Formation deposited in the inner-middle ramp, and commonly start with shallow subtidal to intertidal facies followed by inter- to supratidal facies. In contrast, the subtidal cycles occur throughout the formation mostly in the middle-outer ramp and are dominated by shallow to relatively deep (i.e., intermediate) subtidal facies. The dominance of asymmetrical and incomplete cycles suggests a dominant control of Earth's orbital forcing on the cyclic deposition on the platform. On the basis of vertical facies and cycle stacking patterns, and accommodation changes illustrated by the Fischer plots from all studied sections, five third-order depositional sequences are recognized in the Penglaiba Formation. Individual sequences comprise a lower transgressive part and an upper regressive one. In shallow-water depositional environments, the transgressive packages are dominated by thicker-than-average subtidal cycles, indicating an increase in accommodation space, whereas regressive parts are mainly represented by thinner-than-average peritidal and subtidal cycles, denoting a decrease in accommodation space. In contrast, in intermediate to deep subtidal environments, transgressive and regressive packages display an opposite trend in accommodation space changes. Sequence boundaries (except the basal and top boundaries of the Penglaiba Formation) are usually represented by laterally traceable, transitional boundary zones without apparent subaerial exposure features. Good correlation of the long-term changes in accommodation space (or sea-level) inferred from vertical stacking patterns of facies and cycles suggests an overriding eustatic control on the formation of meter-scale cycles and third-order depositional sequences as well as platform evolution superimposed with local and/or regional tectonic influence during the Early Ordovician. This study would help understand the controls on the tempo-spatial facies distribution, stratal cyclicity and carbonate platform evolution in the western Tarim Basin during the Early Ordovician, facilitating prediction for favorable subsurface carbonate reservoirs and future hydrocarbon exploration and production in the Penglaiba Formation.

Facies analysis and sequence stratigraphic framework of upper Campanian strata (Neslen and Mount Garfield formations, Bluecastle Tongue of the Castlegate sandstone, and Mancos shale), Eastern Book cliffs, Colorado and Utah

USGS Publications Warehouse

Kirschbaum, Mark A.; Hettinger, Robert D.

2004-01-01

Facies and sequence-stratigraphic analysis identifies six high-resolution sequences within upper Campanian strata across about 120 miles of the Book Cliffs in western Colorado and eastern Utah. The six sequences are named after prominent sandstone units and include, in ascending order, upper Sego sequence, Neslen sequence, Corcoran sequence, Buck Canyon/lower Cozzette sequence, upper Cozzette sequence, and Cozzette/Rollins sequence. A seventh sequence, the Bluecastle sequence, is present in the extreme western part of the study area. Facies analysis documents deepening- and shallowing- upward successions, parasequence stacking patterns, downlap in subsurface cross sections, facies dislocations, basinward shifts in facies, and truncation of strata.All six sequences display major incision into shoreface deposits of the Sego Sandstone and sandstones of the Corcoran and Cozzette Members of the Mount Garfield Formation. The incised surfaces represent sequence-boundary unconformities that allowed bypass of sediment to lowstand shorelines that are either attached to the older highstand shorelines or are detached from the older highstand shorelines and located southeast of the main study area. The sequence boundary unconformities represent valley incisions that were cut during successive lowstands of relative sea level. The overlying valley-fill deposits generally consist of tidally influenced strata deposited during an overall base level rise. Transgressive surfaces can be traced or projected over, or locally into, estuarine deposits above and landward of their associated shoreface deposits. Maximum flooding surfaces can be traced or projected landward from offshore strata into, or above, coastal-plain deposits. With the exception of the Cozzette/Rollins sequence, the majority of coal-bearing coastal-plain strata was deposited before maximum flooding and is therefore within the transgressive systems tracts. Maximum flooding was followed by strong progradation of parasequences and low preservation potential of coastal-plain strata within the highstand systems tract. The large incised valleys, lack of transgressive retrogradational parasequences, strong progradational nature of highstand parasequences, and low preservation of coastal-plain strata in the highstand systems tracts argue for relatively low accommodation space during deposition of the Sego, Corcoran, and Cozzette sequences. The Buck Canyon/Cozzette and Cozzette/Rollins sequences contrast with other sequences in that the preservation of retrogradational parasequences and the development of large estuaries coincident with maximum flooding indicate a relative increase in accommodation space during deposition of these strata. Following maximum flooding, the Buck Canyon/Cozzette sequence follows the pattern of the other sequences, but the Cozzette/Rollins sequence exhibits a contrasting offlapping pattern with development of offshore clinoforms that downlap and eventually parallel its maximum flooding surface. This highstand systems tract preserves a thick coal-bearing section where the Rollins Sandstone Member of the Mount Garfield Formation parasequences prograde out of the study area, stepping up as much as 800 ft stratigraphically over a distance of about 90 miles. This progradational stacking pattern indicates a higher accommodation space and increased sedimentation rate compared to the previous sequences.

The Value of Darkness: A Moral Framework for Urban Nighttime Lighting.

PubMed

Stone, Taylor

2018-04-01

The adverse effects of artificial nighttime lighting, known as light pollution, are emerging as an important environmental issue. To address these effects, current scientific research focuses mainly on identifying what is bad or undesirable about certain types and uses of lighting at night. This paper adopts a value-sensitive approach, focusing instead on what is good about darkness at night. In doing so, it offers a first comprehensive analysis of the environmental value of darkness at night from within applied ethics. A design for values orientation is utilized to conceptualize, define, and categorize the ways in which value is derived from darkness. Nine values are identified and categorized via their type of good, temporal outlook, and spatial characteristics. Furthermore, these nine values are translated into prima facie moral obligations that should be incorporated into future design choices, policy-making, and innovations to nighttime lighting. Thus, the value of darkness is analyzed with the practical goal of informing future decision-making about urban nighttime lighting.

L'Anti-Atlas occidental du Maroc: étude sédimentologique et reconstitutions paléogéographiques au Cambrien inférieur

NASA Astrophysics Data System (ADS)

Benssaou, M.; Hamoumi, N.

2001-04-01

L'étude lithostratigraphique en sédimentologique des formations du Cambrien inférieur de l'Anti-Atlas occidental (Maroc) a permis de mettre en évidence la diversité extrême des faciès allant des faciès continentaux jusqu'au faciès franchement marins. La répartition verticale de ces faciès ainsi que leurs associations ont permis de (i) proposer un nouveau découpage de la succession en formations lithostratigraphiques, (ii) reconstituer les milieux de dépôt (système fluviatile, lacs, fan-deltas, milieu littoral, plate-forme dominée par des constructions stromatolitiques et récifales et plate-forme dominée par les tempêtes) et (iii) établir des modèles paléogéographiques retraçant les différentes étapes d'évolution de ce bassin qui fait partie de la plate-forme nord-gondwanienne au Cambrien inférieur. Lithostratigraphical and sedimentological studies of the Early Cambrian formations in the western Anti-Atlas (Morocco) evidence their large diversity of facies ranging from continental to clearly marine. Vertical distribution and associations of facies afford opportunities to (i) suggest a new classification of the sedimentary sequence in terms of lithostratigraphic formations, (ii) restore the depositional environments (fluvial system, lake, delta fan, coast, stromatolite and reef-dominated platform, tempest-dominated platform), and (iii) establish palæogeographic models displaying the different evolutionary stages of this basin that constituted a part of the Lower Cambrian north-Gondwanian platform.

Facies heterogeneity, pay continuity, and infill potential in barrier-island, fluvial, and submarine fan reservoirs: examples from the Texas Gulf Coast and Midland basins

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ambrose, W.A.; Tyler, N.

1989-03-01

Three reservoirs representing different depositional environments - barrier island (West Ranch field, south-central Texas), fluvial (La Gloria field, south Texas), and submarine fan (Spraberry trend, Midland basin) - illustrate variations in reservoir continuity. Pay continuity methods based on facies geometry and variations in permeability and thickness between wells can quantify reservoir heterogeneity in each of these examples. Although barrier-island reservoirs are relatively homogeneous, West Ranch field contains wide (1000-5000 ft or 300-1500 m) dip-parallel belts of lenticular inlet-fill facies that disrupt reservoir continuity in the main barrier-core facies. Other reservoir compartments in West Ranch field are in flood-tidal delta depositsmore » partly encased in lagoonal mudstones updip of the barrier core. Fluvial reservoirs have a higher degree of internal complexity than barrier-island reservoirs. In La Gloria field, reservoirs exhibit significant heterogeneity in the form of numerous sandstone stringers bounded vertically and laterally by thin mudstone layers. Successful infill wells in La Gloria field contact partly drained reservoir compartments in splay deposits that pinch out laterally into flood-plain mudstones. Recompletions in vertically isolated sandstone stringers in La Gloria field contact other reservoir compartments. Submarine fan deposits are extremely heterogeneous and may have the greatest potential for infill drilling to tap isolated compartments in clastic reservoirs. The Spraberry trend contains thin discontinuous reservoir sandstones deposited in complex mid-fan channels. Although facies relationships in Spraberry reservoirs are similar to those in fluvial reservoirs in La Gloria field, individual pay stringers are thinner and more completely encased in low-permeability mudstone facies.« less

An Archaean submarine volcanic debris avalanche deposit, Yilgarn Craton, western Australia, with komatiite, basalt and dacite megablocks. The product of dome collapse

NASA Astrophysics Data System (ADS)

Trofimovs, J.; Cas, R. A. F.; Davis, B. K.

2004-11-01

The Boorara Domain of the Kalgoorlie Terrane, Eastern Goldfields Superterrane, western Australia contains excellent exposure of Archaean felsic and ultramafic breccias characterised by facies associations interpreted to reflect a volcanic debris avalanche mode of deposition. Such Archaean volcanic deposits are typically difficult to identify due to poor preservation and exposure. However, primary volcanological and sedimentological features are preserved within the relatively low strain and low metamorphic grade (up to lower greenschist facies) Boorara Domain that allow accurate facies reconstruction. The breccia deposit is characterised by two clast populations. A 'block facies' comprised of metre- to decimetre-scale megablocks of dacite, basalt and komatiite is preserved within a 'mixed' matrix breccia facies of angular, coarse sand- to boulder-sized clasts. The megablocks preserve original stratigraphy and show fracturing and jigsaw-fit textures within the poorly sorted, unstratified, genetically related matrix. Overlying the volcanic debris avalanche deposit, are a series of stratified horizons. These deposits show evidence of hydraulic sorting within bedforms exhibiting normal grain-size grading and tractional scour and fill structures along their basal contacts. The stratified facies is interpreted to have been deposited by high concentration, high competency turbidity currents, triggered by slope stabilization slides in the source region. Primary contacts and volcanic textures preserved in decimetre-scale volcanic blocks allow reconstruction of the pre-collapse palaeovolcanological history of the source region. The volcanic debris avalanche deposit, together with the associated stratified sedimentary horizons, were produced by sector collapse of a submarine, dacitic volcanic dome. Contemporaneous komatiite intrusion into the dacite dome may have caused dome flank instability. However, the volcanic debris avalanche trigger is interpreted to be a post-lithification tectonic influence.

The Chimborazo sector collapse and debris avalanche: Deposit characteristics as evidence of emplacement mechanisms

NASA Astrophysics Data System (ADS)

Bernard, Benjamin; van Wyk de Vries, Benjamin; Barba, Diego; Leyrit, Hervé; Robin, Claude; Alcaraz, Samantha; Samaniego, Pablo

2008-09-01

Chimborazo is a Late Pleistocene to Holocene stratovolcano located at the southwest end of the main Ecuadorian volcanic arc. It experienced a large sector collapse and debris avalanche (DA) of the initial edifice (CH-I). This left a 4 km wide scar, removing 8.0 ± 0.5 km 3 of the edifice. The debris avalanche deposit (DAD) is abundantly exposed throughout the Riobamba Basin to the Río Chambo, more than 35 km southeast of the volcano. The DAD averages a thickness of 40 m, covers about 280 km 2, and has a volume of > 11 km 3. Two main DAD facies are recognized: block and mixed facies. The block facies is derived predominantly from edifice lava and forms > 80 vol.% of the DAD, with a probable volume increase of 15-25 vol.%. The mixed facies was essentially created by mixing brecciated edifice rock with substratum and is found mainly in distal and marginal areas. The DAD has clear surface ridges and hummocks, and internal structures such as jigsaw cracks, injections, and shear-zone features are widespread. Structures such as stretched blocks along the base contact indicate high basal shear. Substratum incorporation is directly observed at the base and is inferred from the presence of substratum-derived material in the DAD body. Based on the facies and structural interpretation, we propose an emplacement model of a lava-rich avalanche strongly cataclased before and/or during failure initiation. The flow mobilises and incorporates significant substrata (10-14 vol.%) while developing a fine lubricating basal layer. The substrata-dominated mixed facies is transported to the DAD interior and top in dykes invading previously-formed fractures.

Depositional facies and porosity development at Coon Creek Field (Newman [open quotes]Big Lime[close quotes]), Leslie County, Kentucky

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moshier, S.O.; Stamper, M.E.

1994-08-01

Coon Creek field is a significant petroleum reservoir in the [open quotes]Big Lime[close quotes], Middle to Upper Mississippian Newman equivalent, in southeastern Kentucky. Initial production from select wells has exceeded 600 bbl of oil/day at drilling depths averaging 915 m (3300 ft). Facies patterns, dolomitization, porosity, and structure in this carbonate reservoir have been delineated by geophysical logs, subsurface mapping, and examination of cores and cuttings. The reservoir is set within a localized paleotopographic low on the unconformable surface of the underlying siliciclastic Borden Group; the Borden surface can express rapid relief of over a 10% grade within less thanmore » 300 m. Transgression across the exposed Borden surface resulted in the deposition of a complex system of carbonates lithofacies. Crinoidal dolostones, representing shallow subtidal skeletal bars and banks, form the basal Big Lime (1.5-6 m thick). They are overlain by a typical facies (30 m thick) of bryozoan grainstones/packstones, crinoid grainstones, and mixed skeletal wakestones/mudstones. The rybryozoanacies are characterized by unfragmented fenestrates cemented by radiaxial-fibrous calcite. Stratigraphic distributions indicate the bryozoan facies were broad buildups with crinoidal flank and cap deposits and muddy skeletal off-mount facies, similar to deeper water Waulsortian mounds in other basins. Pellet and ooid grainstones represent moderate- to high-energy subtidal shoal deposits that covered the mound complex. Hydrocarbon production is restricted in the field to the crinoid-bryozoan facies complex within the basal 30 m. Reservoir porosity and permeability have been enhanced by selective dolomitization of grainstones and fracturing related to postdepositional reactivation of basement faults.« less

Level-set techniques for facies identification in reservoir modeling

NASA Astrophysics Data System (ADS)

Iglesias, Marco A.; McLaughlin, Dennis

2011-03-01

In this paper we investigate the application of level-set techniques for facies identification in reservoir models. The identification of facies is a geometrical inverse ill-posed problem that we formulate in terms of shape optimization. The goal is to find a region (a geologic facies) that minimizes the misfit between predicted and measured data from an oil-water reservoir. In order to address the shape optimization problem, we present a novel application of the level-set iterative framework developed by Burger in (2002 Interfaces Free Bound. 5 301-29 2004 Inverse Problems 20 259-82) for inverse obstacle problems. The optimization is constrained by (the reservoir model) a nonlinear large-scale system of PDEs that describes the reservoir dynamics. We reformulate this reservoir model in a weak (integral) form whose shape derivative can be formally computed from standard results of shape calculus. At each iteration of the scheme, the current estimate of the shape derivative is utilized to define a velocity in the level-set equation. The proper selection of this velocity ensures that the new shape decreases the cost functional. We present results of facies identification where the velocity is computed with the gradient-based (GB) approach of Burger (2002) and the Levenberg-Marquardt (LM) technique of Burger (2004). While an adjoint formulation allows the straightforward application of the GB approach, the LM technique requires the computation of the large-scale Karush-Kuhn-Tucker system that arises at each iteration of the scheme. We efficiently solve this system by means of the representer method. We present some synthetic experiments to show and compare the capabilities and limitations of the proposed implementations of level-set techniques for the identification of geologic facies.

Valley-fill sequences and onlap geometries, Lower Cretaceous Muddy Sandstone, Kitty Field, Powder River basin, Wyoming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardner, M.H.; Gustason, E.R.

1987-05-01

The Muddy Sandstone at Kitty field is a valley-fill sequence that records a late Albian sea level rise and accompanying transgression. The valley was cut during a preceding sea level lowstand. Stratal geometries and facies successions within the valley fill demonstrate the history of transgression was not gradual and progressive. Rather, the valley fill comprises a series of discrete, time-bounded, depositional units which onlap the erosional surface. Five time-bounded depositional units were defined by facies successions and were used to define onlap geometries. Facies successions within individual units record progressive shoaling. Capping each succession, there may be a planar disconformity,more » a thin bioturbated interval, or the deepest water facies of the next depositional event. Thus, the termination of each depositional event is marked by an episode of rapid deepening. At a single geographic location, stratal successions within older depositional units represent more landward facies than those within younger units. Therefore, the onlap geometry of the valley-fill sequence consists of a landward-stepping arrangement of depositional units. The primary reservoirs within the valley-fill sequence, at Kitty field, are laterally coalesced, channel-belt sandstones at the base and barrier island sandstones at the top. Reservoir sandstones of lesser quality occur within the intermediate estuarine facies. The stacking pattern, developed by onlap of the units, results in multiple pay zones within mid-valley reaches. The boundaries of each depositional unit define a high-resolution, chronostratigraphic correlation of valley-fill strata, a correlation corroborated by bentonites. This correlation method gives an accurate description of the internal geometry of valley-fill strata and, therefore, provides a basis for understanding the process of transgressive onlap.« less

Sedimentary Facies Mapping Based on Tidal Channel Network and Topographic Features

NASA Astrophysics Data System (ADS)

Ryu, J. H.; Lee, Y. K.; Kim, K.; Kim, B.

2015-12-01

Tidal flats on the west coast of Korea suffer intensive changes in their surface sedimentary facies as a result of the influence of natural and artificial changes. Spatial relationships between surface sedimentary facies distribution and benthic environments were estimated for the open-type Ganghwa tidal flat and semi closed-type Hwangdo tidal flat, Korea. In this study, we standardized the surface sedimentary facies and tidal channel index of the channel density, distance, thickness and order. To extract tidal channel information, we used remotely sensed data, such as those from the Korea Multi-Purpose Satellite (KOMPSAT)-2, KOMPSAT-3, and aerial photographs. Surface sedimentary facies maps were generated based on field data using an interpolation method.The tidal channels in each sediment facies had relatively constant meandering patterns, but the density and complexity were distinguishable. The second fractal dimension was 1.7-1.8 in the mud flat, about 1.4 in the mixed flat, and about 1.3 in the sand flat. The channel density was 0.03-0.06 m/m2 in the mud flat and less than 0.02 m/m2 in the mixed and sand flat areas of the two test areas. Low values of the tidal channel index, which indicated a simple pattern of tidal channel distribution, were identified at areas having low elevation and coarse-grained sediments. By contrast, high values of the tidal channel index, which indicated a dendritic pattern of tidal channel distribution, were identified at areas having high elevation and fine-grained sediments. Surface sediment classification based on remotely sensed data must circumspectly consider an effective critical grain size, water content, local topography, and intertidal structures.

Timing and duration of Variscan high-pressure metamorphism in the French Massif Central: A multimethod geochronological study from the Najac Massif

NASA Astrophysics Data System (ADS)

Lotout, Caroline; Pitra, Pavel; Poujol, Marc; Anczkiewicz, Robert; Van Den Driessche, Jean

2018-05-01

Accurate dating of eclogite-facies metamorphism is of paramount importance in order to understand the tectonic evolution of an orogen. An eclogite sample from the Najac Massif (French Massif Central, Variscan belt) displays a zircon-bearing garnet-omphacite-amphibole-rutile-quartz peak assemblage. Pseudosection modeling suggests peak pressure conditions of 15-20 kbar, 560-630 °C. Eclogite-facies garnet displays Lu-enriched cores and Sm-rich rims and yields a Lu-Hf age of 382.8 ± 1.0 Ma and a Sm-Nd age of 376.7 ± 3.3 Ma. The ages are interpreted as marking the beginning of the prograde garnet growth during the initial stages of the eclogite-facies metamorphism, and the high-pressure (and temperature) peak reached by the rock, respectively. Zircon grains display chondrite-normalized REE spectra with variably negative, positive or no Eu anomalies and are characterized by either enriched or flat HREE patterns. However, they yield a well constrained in situ LA-ICP-MS U-Pb age of 385.5 ± 2.3 Ma, despite this REE pattern variability. Zr zonation in garnet, Y content in zircon and the diversity of zircon HREE spectra may suggest that zircon crystallized prior to and during incipient garnet growth on the prograde P-T path, recording the initial stages of the eclogite-facies conditions. Consequently, the zircon age of 385.5 ± 2.3 Ma, comparable within error with the Lu-Hf age obtained on garnet, is interpreted as dating the beginning of the eclogite-facies metamorphism. Accordingly, the duration of the prograde part of the eclogite-facies event is estimated at 6.1 ± 4.3 Myr. Subsequent exhumation is constrained by an apatite U-Pb age at 369 ± 13 Ma.

Emplacement mechanisms of the South Kona slide complex, Hawaii Island: Sampling and observations by remotely operated vehicle Kaiko

USGS Publications Warehouse

Yokose, H.; Lipman, P.W.

2004-01-01

Emplacement of a giant submarine slide complex, offshore of South Kona, Hawaii Island, was investigated in 2001 by visual observation and in-situ sampling on the bench scarp and a megablock, during two dives utilizing the Remotely Operated Vehicle (ROV) Kaiko and its mother ship R/V Kairei. Topography of the bench scarp and megablocks were defined in 3-D perspective, using high-resolution digital bathymetric data acquired during the cruise. Compositions of 34 rock samples provide constraints on the landslide source regions and emplacement mechanisms. The bench scarp consists mainly of highly fractured, vesiculated, and oxidized a-a lavas that slumped from the subaerial flank of ancestral Mauna Loa. The megablock contains three units: block facies, matrix facies, and draped sediment. The block facies contains hyaloclastite interbedded with massive lava, which slid from the shallow submarine flank of ancestral Mauna Loa, as indicated by glassy groundmass of the hyaloclastite, low oxidation state, and low sulfur content. The matrix facies, which directly overlies the block facies and is similar to a lahar deposit, is thought to have been deposited from the water column immediately after the South Kona slide event. The draped sediment is a thin high-density turbidite layer that may be a distal facies of the Alika-2 debris-avalanche deposit; its composition overlaps with rocks from subaerial Mauna Loa. The deposits generated by the South Kona slide vary from debris avalanche deposit to turbidite. Spatial distribution of the deposits is consistent with deposits related to large landslides adjacent to other Hawaiian volcanoes and the Canary Islands. ?? Springer-Verlag 2004.

Cement Distribution and Diagenetic Pathway of the Miocene Sediments on Kardiva Platform, Maldives.

NASA Astrophysics Data System (ADS)

Laya, J. C.; Prince, K.; Betzler, C.; Eberli, G. P.; Blättler, C. L.; Swart, P. K.; Reolid, J.; Alvarez Zarikian, C. A.; Reijmer, J.

2017-12-01

The Maldives archipelago is an ideal example for understanding the dynamics of isolated carbonate platforms. While previous sedimentological studies have focused on oceanographic and climatic controls on deposition, there have been limited studies on the diagenetic evolution of the Maldives archipelago. This project seeks to establish a relationship between the facies, cement distribution, and diagenetic evolution of the Kardiva Platform and associated diagenetic fluids. Samples from cores of IODP Expedition 359 at Sites U1645, U1469, and U1470 were analyzed for stable isotope geochemistry and detailed petrography including SEM, confocal and CL microscopy to investigate variations in facies, cements, porosity and diagenetic products. The facies analyzed consist mainly of planktonic and benthic foraminifers, red coralline algae, echinoderm, coral and skeletal fragments. The main facies include foraminifera grain/packstone, red algae rich grain/packstone, algal floatstone and coral floatstone. Those facies present a cyclic and general shallowing upwards trend. These facies are interpreted as shallow platform deposits on proximal areas to the margin associated with the oligophotic zone. Cement volume varies between 5% and 48%, and they have been classified as isopachous, bladed to fibrous (dog tooth), drusy and equant. Equant and drusy show recognizable growth bands with CL and confocal. Evidence of intense dissolution is shown by extensive moldic porosity within phreatic and limited vadose zones. In addition, dolomite appears as a replacement phase associated with red-algae-rich horizons and as cement on pore walls and voids. These deposits experienced a variety of diagenetic processes driven by the evolution of diagenetic fluid chemistry and by the nature of the skeletal components. Those processes can be tied to external controls such as climate (monsoonal effects), sea-level and currents.

The dilemma of gaps in carbonate stratigraphic sequences: A case history from the Jurassic of the Venetian Alps, Italy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zempolich, W.G.

The Lower Ammonitico Rosso (L.A.R.) of the western Venetian Alps is a thin, red nodular limestone that overlies a thick Late Triassic to Middle Jurassic (Aalenian) shallow-water platform sequence. It is thought to represent a Middle Jurassic (Bajocian) drowning event whereby the Trento Platform became a submerged plateau. The L.A.R. is problematic in that it (1) is rich in ammonites and other pelagic fauna; (2) contains stromatolites, oncolites, and shallow-water sedimentary structures; and (3) directly overlies platform sediments that contain complex brecciated fabrics filled by cement and Bajocian-age sediment. These seemingly contradictory features have generated much debate as to themore » sequence stratigraphy of the Trento Platform. New evidence suggests that the L.A.R. was deposited in a shallow-water environment following a period of subaerial exposure. In an east-west transect from the platform edge to platform interior, a clear transition is exhibited from high- and low-energy open-marine facies to restricted lagoonal facies. High-energy open-marine facies include well-sorted skeletal- and peloidal-rich sands possessing low-angle to planar cross stratification and thin, fairly sorted ammonite- and belemnite-rich gravels. Sands include both shallow-water and pelagic fauna; gravels commonly contain ripup clasts from underlying sediments. Low-energy open-marine facies consist of buff colored wackestones and packstones that contain ammonites, belemnites, pelagic bivalves, and peloids. With respect to paleogeography, the abrupt transition from open-marine facies at the platform edge to lagoonal facies in the platform interior indicates that thrombolites, stromatolites, and oncolites accumulated in a shallow restricted environment.« less

Distal turbidite fan/lobe succession of the Late Oligocene Zuberec Fm. - architecture and hierarchy (Central Western Carpathians, Orava-Podhale basin)

NASA Astrophysics Data System (ADS)

Starek, Dušan; Fuksi, Tomáš

2017-08-01

A part of the Upper Oligocene sand-rich turbidite systems of the Central Carpathian Basin is represented by the Zuberec Formation. Sand/mud-mixed deposits of this formation are well exposed in the northern part of the basin, allowing us to interpret the turbidite succession as terminal lobe deposits of a submarine fan. This interpretation is based on the discrimination of three facies associations that are comparable to different components of distributive lobe deposits in deep-water fan systems. They correspond to the lobe off-axis, lobe fringe and lobe distal fringe depositional subenvironments, respectively. The inferences about the depositional paleoenvironment based on sedimentological observations are verified by statistical analyses. The bed-thickness frequency distributions and vertical organization of the facies associations show cyclic trends at different hierarchical levels that enable us to reconstruct architectural elements of a turbidite fan. First, small-scale trends correspond with shift in the lobe element centroid between successive elements. Differences in the distribution and frequency of sandstone bed thicknesses as well as differences in the shape of bed-thickness frequency distributions between individual facies associations reflect a gradual fining and thinning in a down-dip direction. Second, meso-scale trends are identified within lobes and they generally correspond to the significant periodicity identified by the time series analysis of the bed thicknesses. The meso-scale trends demonstrate shifts in the position of the lobe centroid within the lobe system. Both types of trends have a character of a compensational stacking pattern and could be linked to autogenic processes. Third, a largescale trend documented by generally thickening-upward stacking pattern of beds, accompanied by a general increase of the sandstones/mudstones ratio and by a gradual change of percentage of individual facies, could be comparable to lobe-system scale. This trend probably indicates a gradual basinward progradation of lobe system controlled by allogenic processes related to tectonic activity of sources and sea-level fluctuations.

Neoarchean arc magmatism followed by high-temperature, high-pressure metamorphism in the Nilgiri Block, southern India

NASA Astrophysics Data System (ADS)

Samuel, Vinod O.; Sajeev, K.; Hokada, T.; Horie, K.; Itaya, T.

2015-11-01

The Nilgiri Block, southern India is an exhumed lower crust formed through arc magmatic processes in the Neoarchean. The main lithologies in this terrane include charnockites, gneisses, volcanic tuff, metasediments, banded iron formation and mafic-ultramafic bodies. Mafic-ultramafic rocks are present towards the northern and central part of the Nilgiri Block. We examine the evolution of these mafic granulites/metagabbros by phase diagram modeling and U-Pb sensitive high resolution ion microprobe (SHRIMP) dating. They consist of a garnet-clinopyroxene-plagioclase-hornblende-ilmenite ± orthopyroxene ± rutile assemblage. Garnet and clinopyroxene form major constituents with labradorite and orthopyroxene as the main mineral inclusions. Labradorite, identified using Raman analysis, shows typical peaks at 508 cm- 1, 479 cm- 1, 287 cm- 1 and 177 cm- 1. It is stable along with orthopyroxene towards the low-pressure high-temperature region of the granulite facies (M1 stage). Subsequently, orthopyroxene reacted with plagioclase to form the peak garnet + clinopyroxene + rutile assemblage (M2 stage). The final stage is represented by amphibolite facies-hornblende and plagioclase-rim around the garnet-clinopyroxene assemblage (M3 stage). Phase diagram modeling shows that these mafic granulites followed an anticlockwise P-T-t path during their evolution. The initial high-temperature metamorphism (M1 stage) was at 850-900 °C and ~ 9 kbar followed by high-pressure granulite facies metamorphism (M2 stage) at 850-900 °C and 14-15 kbar. U-Pb isotope studies of zircons using SHRIMP revealed late Neoarchean to early paleoproterozoic ages of crystallization and metamorphism respectively. The age data shows that these mafic granulites have undergone arc magmatism at ca. 2539.2 ± 3 Ma and high-temperature, high-pressure metamorphism at ca. 2458.9 ± 8.6 Ma. Thus our results suggests a late Neoarchean arc magmatism followed by early paleoproterozoic high-temperature, high-pressure granulite facies metamorphism due to the crustal thickening and suturing of the Nilgiri Block onto the Dharwar Craton.

Using Seismic Refraction and Ground Penetrating Radar (GPR) to Characterize the Valley Fill in Beaver Meadows, Rocky Mountain National Park

NASA Astrophysics Data System (ADS)

Kramer, N.; Harry, D. L.; Wohl, E. E.

2010-12-01

This study is one of the first to use near surface geophysical techniques to characterize the subsurface stratigraphy in a high alpine, low gradient valley with a past glacial history and to obtain a preliminary grasp on the impact of Holocene beaver activity. Approximately 1 km of seismic refraction data and 5 km of GPR data were collected in Beaver Meadows, Rocky Mountain National Park. An asymmetric wedge of sediment ranging in depth from 0-20 m transverse to the valley profile was identified using seismic refraction. Complementary analysis of the GPR data suggests that the valley fill can be subdivided into till deposited during the Pleistocene glaciations and alluvium deposited during the Holocene. Two main facies were identified in the GPR profiles through pattern recognition. Facie Fd, which consists of chaotic discontinuous reflectors with an abundance of diffractions, is interpreted to be glacial till. Facie Fc, which is a combination of packages of complex slightly continuous reflectors interfingered with continuous horizontal to subhorizontal reflectors, is interpreted to be post-glacial alluvium and includes overbank, pond and in-channel deposits. Fc consistently overlies Fd throughout the study area and is no more than 7 m thick in the middle of the valley. The thickness of Holocene sedimentation (<7 m) is much less than the total amount of valley fill identified in the seismic refraction survey (0-20 m). A subfacie of Fc, Fch, which has reflectors with long periods was identified within Fc and is interpreted to be ponded sediments. The spatial distribution of facie Fch, along with: slight topographical features resembling buried beaver dams, a high abundance of fine sediment including silts and clays, historical records of beavers, and the name "Beaver Meadows" all suggest that Holocene beaver activity played a large role in sediment accumulation at this site, despite the lack of surficial relict beaver dams containing wood.

Anatomy and dimensions of fluvial crevasse-splay deposits: Examples from the Cretaceous Castlegate Sandstone and Neslen Formation, Utah, U.S.A.

NASA Astrophysics Data System (ADS)

Burns, C. E.; Mountney, N. P.; Hodgson, D. M.; Colombera, L.

2017-04-01

Crevasse-splay deposits form a volumetrically significant component of many fluvial overbank successions (up to 90% in some successions).Yet the relationships between the morphological form of accumulated splay bodies and their internal facies composition remains poorly documented from ancient successions. This work quantifies lithofacies distributions and dimensions of exhumed crevasse-splay architectural elements in the Campanian Castlegate Sandstone and Neslen Formation, Mesaverde Group, Utah, USA, to develop a depositional model. Fluvial crevasse-splay bodies thin from 2.1 m (average) to 0.8 m (average) and fine from a coarsest recorded grain size of lower-fine sand to fine silt away from major trunk channel bodies. Internally, the preserved deposits of splays comprise laterally and vertically variable sandstone and siltstone facies associations: proximal parts are dominated by sharp and erosional-based sandstone-prone units, which may be structureless or may comprise primary current lineation on beds and erosional gutter casts; medial parts comprise sets of climbing-ripple strata and small scale deformed beds; distal parts comprise sets of lower-stage plane beds and complex styles of lateral grading into fine-grained floodbasin siltstones and coals. Lithofacies arrangements are used to establish the following: (i) recognition criteria for crevasse-splay elements; (ii) criteria for the differentiation between distal parts of crevasse-splay bodies and floodplain fines; and (iii) empirical relationships with which to establish the extent (ca. 500 m long by 1000 m wide) and overall semi-elliptical planform shape of crevasse-splay bodies. These relationships have been established by high-resolution stratigraphic correlation and palaeocurrent analysis to identify outcrop orientation with respect to splay orientation. This permits lateral changes in crevasse-splay facies architecture to be resolved. Facies models describing the sedimentology and architecture of crevasse-splay deposits preserved in floodplain successions serve as tools for determining both distance from and direction to major trunk channel sandbodies.

La Escalerilla pluton, San Luis Argentina: The orogenic and post-orogenic magmatic evolution of the famatinian cycle at Sierras de San Luis

NASA Astrophysics Data System (ADS)

Morosini, Augusto Francisco; Ortiz Suárez, Ariel Emilio; Otamendi, Juan Enrique; Pagano, Diego Sebastián; Ramos, Gabriel Alejandro

2017-01-01

Field relationships, geochemical analysis and two new absolute ages (LA-MC-ICP-MS U/Pb-zircon) allow the division of the La Escalerilla pluton (previously considered to be a single granitic body) into two different plutons: a new La Escalerilla pluton (s.s.), dated at 476.7 ± 9.6 Ma, that represents the northern portion, and the El Volcán pluton, dated at 404.5 ± 8.5 Ma, located in the southern sector. The La Escalerilla pluton is composed of three facies: (1) biotite-bearing granodiorite, (2) porphyritic biotite-bearing granite, and (3) porphyritic two micas-bearing leucogranite, being the presence of late-magmatic dykes in these facies common. The El Volcán pluton is composed of two main facies: 1) porphyritic biotite-bearing granite, and 2) two micas-bearing leucogranite, but amphibole-bearing monzodioritic and tonalititic mega-enclaves are also common, as well as some dykes of amphibole and clinopyroxene-bearing syenites. A peculiarity between the two plutons is that their most representative facies (porphyritic biotite-bearing granites) have, apart from different absolute ages, distinctive geochemical characteristics in their concentrations of trace elements; the La Escalerilla granite is comparatively poorer in Ba, Sr, Nb, La, Ce, P, and richer in Rb, Tb, Y, Tm and Yb. The El Volcán granite is notably enriched in Sr and depleted in Y, resulting in high Sr/Y ratios (12.67-39.08) compared to the La Escalerilla granite (1.11-2.41). These contrasts indicate that the separation from their sources occurred at different depths: below 25 km for the La Escalerilla, and above 30 km for the El Volcán. Moreover, the contrasts allow us to interpret a thin crust linked to an environment of pre-collisional subduction for the first case, and a thickened crust of post-collisional environment for the second, respectively.

Studies of contemporary glacier basal ice cryostructures to identify buried basal ice in the permafrost: an example from the Matanuska Glacier, Alaska.

NASA Astrophysics Data System (ADS)

Stephani, E.; Fortier, D.; Kanevskiy, M.; Dillon, M.; Shur, Y.

2007-12-01

In the permafrost, massive ice bodies occur as buried glacier ice, aufeis ice, recrystalized snow, massive segregated ice, injection ice, ice wedges or ice formed in underground cavities ("pool ice", "thermokarst-cave ice"). The origin of massive ice bodies in the permafrost bears considerable implications for the reconstructions of paleoenvironments and paleoclimates. Our work aims to help the permafrost scientists working on massive icy sediments to distinguish buried basal glacier ice from other types of buried ice. To do so, the properties and structure of contemporary basal ice must be well known. Field investigations at the Matanuska Glacier (Chugach range, South-central Alaska), consisted in descriptions and sampling of natural basal ice exposures. We have used the basal ice facies classification of Lawson (1979) which is simple, easy to use in the field and provides a good framework for the description of basal ice exposures. Cores were extracted and brought back to the laboratory for water and grain-size analyses. The sediments forming the cryostructure were mostly polymodal, poorly sorted gravelly silt to gravelly fine sand, with mud contents generally over 50%. These data will be used to calibrate three-dimensional (3D) models produced from micro-tomographic scans of basal ice which will produce quantitative estimates of volumetric ice and sediments contents of basal ice cryostructures. Ultimately, visual qualitative and quantitative characterization of the basal ice components of 3D models together with field observations and laboratory analysis will allow for a new micro-facies and cryostructures classification of the basal ice. Our work will also have applications in glaciology, glacial geology, geomorphology, Quaternary and paleo-climatological studies based on inferences made from the structure of basal glacier ice. This paper presents the internal composition of the basal ice facies in terms of cryostructures assemblages (Fortier et al.: 2007) and sedimentological properties. Fortier, D., Kanevskiy, M, Stephani, E., Dillon, M., Shur, Y. 2007. Facies and cryostructures of glacier basal ice as an object of permafrost study, an example from the Matanuska Glacier, Alaska. Canadian Quaternary Association Conference, Ottawa, June 2007: 75. Lawson, D.E. 1979. Sedimentological analysis of the western terminus region of the Matanuska Glacier, Alaska. Cold Regions Engineering and Research Laboratory, Hanover, N.H., Report 79-9.

Astronomical pacing of ecosystem function in the Green River Formation of Utah and Colorado

NASA Astrophysics Data System (ADS)

van Keuren, M. A.; Whiteside, J. H.; Eglinton, T. I.

2008-12-01

Part of one of the largest petroleum reserves in the world, the Green River Formation of the Uinta and Piceance Creek basins of Utah and Colorado, formed in a huge Eocene lake system during the warmest, most equable period in recent Earth history. Despite the unit's great potential economic importance and correspondingly large number of geochemical analyses and the preeminent role of these strata in Milankovitch theory (Bradley, 1929), there are surprisingly few systematic studies of the geochemistry of the characteristic permeating cyclicity. Here, we report multiple proxies of lacustrine ecosystem dynamics including oil shale yields, sedimentary facies, carbon and nitrogen isotopes, and molecule-level carbon isotopes from the most oil-rich parts (including the Mahogany oil shale zone) from a series of cores and outcrops in a transect across the Uinta and Piceance Creek basins spanning ~500 m stratigraphically and 3.2 m.y. temporally. Our initial results show covariation in sedimentary facies, oil shale yield, TOC, C/N ratios, and δ13Corg in the expected Milankovitch periodicities, although significant lateral and vertical changes in accumulation make the relative spectral power in the precessional range rather weak. There are, however, differences in the mode of response with oil shale yield, TOC, and sedimentary facies showing more power in the precessional range, while C/N ratios track the 100 ky cycle. C/N ratios tend to be high through multiple precessional cycles dominated by kerogen derived from microbial organic matter suggesting persistent anoxia and a large resulting pool of hypolimnetic ammonium. This pool was eliminated during low lake stands and C/N values then fluctuate through several precession controlled steps. The δ13Corg record, while showing a signal coherent with that of other proxies, has a rather complicated relationship with other proxies, the analysis of which is in its early stages. Molecule-level δ13Corg analysis of n-alkanes suggests mixing of carbon from different sources of varying isotopic composition, and presents a dramatically different pattern from that seen in published studies of the saline facies of the formation. Based on our results, the Milankovitch cyclostratigraphy of these cores in concert with that from the rest of the Uinta and Piceance basin sections, can provide a basis for a time scale for continental environments and pivotal mammalian evolution during the hot-house Eocene.

Effects of the Laramide Structures on the Regional Distribution of Tight-Gas Sandstone in the Upper Mesaverde Group, Uinta Basin, Utah

NASA Astrophysics Data System (ADS)

Sitaula, R. P.; Aschoff, J.

2013-12-01

Regional-scale sequence stratigraphic correlation, well log analysis, syntectonic unconformity mapping, isopach maps, and depositional environment maps of the upper Mesaverde Group (UMG) in Uinta basin, Utah suggest higher accommodation in northeastern part (Natural Buttes area) and local development of lacustrine facies due to increased subsidence caused by uplift of San Rafael Swell (SRS) in southern and Uinta Uplift in northern parts. Recently discovered lacustrine facies in Natural Buttes area are completely different than the dominant fluvial facies in outcrops along Book Cliffs and could have implications for significant amount of tight-gas sand production from this area. Data used for sequence stratigraphic correlation, isopach maps and depositional environmental maps include > 100 well logs, 20 stratigraphic profiles, 35 sandstone thin sections and 10 outcrop-based gamma ray profiles. Seven 4th order depositional sequences (~0.5 my duration) are identified and correlated within UMG. Correlation was constructed using a combination of fluvial facies and stacking patterns in outcrops, chert-pebble conglomerates and tidally influenced strata. These surfaces were extrapolated into subsurface by matching GR profiles. GR well logs and core log of Natural Buttes area show intervals of coarsening upward patterns suggesting possible lacustrine intervals that might contain high TOC. Locally, younger sequences are completely truncated across SRS whereas older sequences are truncated and thinned toward SRS. The cycles of truncation and thinning represent phases of SRS uplift. Thinning possibly related with the Uinta Uplift is also observed in northwestern part. Paleocurrents are consistent with interpretation of periodic segmentation and deflection of sedimentation. Regional paleocurrents are generally E-NE-directed in Sequences 1-4, and N-directed in Sequences 5-7. From isopach maps and paleocurrent direction it can be interpreted that uplift of SRS changed route of sediment supply from west to southwest. Locally, paleocurrents are highly variable near SRS further suggesting UMG basin-fill was partitioned by uplift of SRS. Sandstone composition analysis also suggests the uplift of SRS causing the variation of source rocks in upper sequences than the lower sequences. In conclusion, we suggest that Uinta basin was episodically partitioned during the deposition of UMG due to uplift of Laramide structures in the basin and accommodation was localized in northeastern part. Understanding of structural controls on accommodation, sedimentation patterns and depositional environments will aid prediction of the best-producing gas reservoirs.

A Systems Approach for Ameliorating Possible Prima Facie Denial of Hispanic/Black Students' Rights Through Disproportionate Enrollment in Special Education.

ERIC Educational Resources Information Center

McDonnell, James R.

The paper discusses the issue of educational equity, principles of systems analysis, systems approaches in the educational milieu, the evaluation aspect of the systems approach, and application of the systems approach to preventing disproportionate enrollment of Hispanics and Blacks in special education classes in Holyoke, Massachusetts. The…

A Facies Model for Temperate Continental Glaciers.

ERIC Educational Resources Information Center

Ashley, Gail Mowry

1987-01-01

Discusses the presence and dynamics of continental glaciers in the domination of the physical processes of erosion and deposition in the mid-latitudes during the Pleistocene period. Describes the use of a sedimentary facies model as a guide to recognizing ancient temperate continental glacial deposits. (TW)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurst, J.M.; Lapointe, P.A.; Nyein, U.K.

Three Oligocene-Miocene carbonate depositional morphologies commonly occur: shoals, reefs, and isolated platforms. Lenticular shoals (0-25 m thick, 1 km long) are stacked and intercalated with siliciclastic mudstones. Facies include trough/festoon cross-bedded benthic foram grainstones passing laterally and vertically into red-algal dominated graded-laminated beds, bioturbated silty calcareous mudstone, and siliciclastic sandy foram wackestone and packstone. The morphology and facies are hydrodynamically controlled. Pinnacle reefs (1-2 km[sup 2]) dominated by red-algae, branching corals, and large mollusks occur on structure or aligned within shelf mudstones. The latter location reflects low sedimentation rates and hydrodynamic control. Isolated platforms (up to 150 km[sup 2]) aremore » environmental mosaics of marginal path reefs and shoals, interior lagoons, and islands plus marginal slopes. Facies are similar to shoals and reefs except there are more muddy fabrics and less high-energy facies. They develop on tilted fault blocks or eroded submerged arcs in the offshore Gulf of Martaban, distal to the ancestral Irrawaddy delta.« less

Influence of relative sea-level variations on the genesis of palaeoplacers, the examples of Sarrabus (Sardinia, Italy) and the Armorican Massif (western France)

NASA Astrophysics Data System (ADS)

Pistis, Marco; Loi, Alfredo; Dabard, Marie-Pierre

2016-02-01

The aim of this work is to analyse the role of allocyclic processes in the genesis of marine Ordovician palaeoplacers laid down on a terrigenous shelf dominated by storm waves. Sedimentological (facies, sequence stratigraphy) and petrographic analyses combined with natural radioactivity measurement (gamma ray) are carried out. Two facies containing heavy minerals are identified: a shoreface facies and a proximal upper offshore facies. Heavy minerals (mainly titaniferous minerals, zircon and monazite) are concentrated in laminae that can amalgamate to form placers that are several decimetres thick. Their occurrence is highlighted by an increase in the total radioactivity (up to 140,000 cpm) and in the U and Th contents (up to 130 ppm and 800 ppm, respectively). The palaeoplacers are the result of a combination of autocyclic and allocyclic factors. In the stratigraphic record, the palaeoplacers are located in the retrogradation phases and express condensation processes in the nearshore environments.

Modern sedimentary facies, depositional environments, and major controlling processes on an arid siliciclastic coast, Al qahmah, SE Red Sea, Saudi Arabia

NASA Astrophysics Data System (ADS)

Nabhan, Abdullah I.; Yang, Wan

2018-04-01

The facies and environments along the arid siliciclastic coast of Red Sea in Al Qahmah, Saudi Arabia are studied to establish a depositional model for interpretation of ancient rocks deposited in rift settings. Field and petrographic studies of 151 sediment samples in an area of 20 km2 define seven main facies types: beach, washover fan, tidal channel, dune, sabkha, delta, and wadi (seasonal stream). The wadi and delta facies are composed of poorly to moderately well-sorted, gravelly, medium-to-fine sands. Delta-front sands are redistributed by southward longshore currents to form a beach. Beach facies is composed of well-to-moderately sorted fine sands with minor gravels, which contain high concentrations of magnetite, ilmenite, garnet, pyroxene, amphibole, epidote, titanite, and apatite grains, indicating strong winnowing. Crabs and other burrowers destroy primary sedimentary structures and mix sediments in foreshore and backshore of the beaches. Wind and storm surge rework foreshore and backshore sediments to form washover fans. Sabkha facies occurs extensively in supratidal depressions behind beach, are flooded by rainstorms and spring tide, and capped by a 5-cm-thick crust composed of interlaminated halite, quartz, albite, minor gypsum and biotite, and rarely calcium carbonate. Halite occurs as thin sheets and gypsum as nodules with a chicken-wire structure. Clastic fraction in sabkha sediments ranges from coarse silt to coarse sand with moderate sorting, and is transported by currents and wind. Tidal inlets and tidal creeks assume abandoned wadis and are filled by muddy sand. Sand dunes and sand sheets are 1-7 m high and widely distributed due to variable wind directions. Fine-grained dune sands are moderately well sorted, whereas sheet sands are coarser and poorly sorted due to vegetation baffling. Most eolian sands are sourced from beach deposits. This suite of complex riverine, wave, tidal, wind, chemical, and biological processes form the facies mosaic along the arid Al Qahmah coast, which is strongly affected by climate-driven evaporation and wind action.

UAV, DGPS, and Laser Transit Mapping of Microbial Mat Ecosystems on Little Ambergris Cay, B.W.I.

NASA Astrophysics Data System (ADS)

Stein, N.; Quinn, D. P.; Grotzinger, J. P.; Fischer, W. W.; Knoll, A. H.; Cantine, M.; Gomes, M. L.; Grotzinger, H. M.; Lingappa, U.; Metcalfe, K.; O'Reilly, S. S.; Orzechowski, E. A.; Riedman, L. A.; Strauss, J. V.; Trower, L.

2016-12-01

Little Ambergris Cay is a 6 km long, 1.6 km wide uninhabited island on the Caicos platform in the Turks and Caicos. Little Ambergris provides an analog for the study of microbial mat development in the sedimentary record. Recent field mapping during July of 2016 used UAV- and satellite-based images, differential GPS (DGPS), and total station theodolite (TST) measurements to characterize sedimentology and biofacies across the entirety of Little Ambergris Cay. Nine facies were identified in-situ during DGPS island transects including oolitic grainstone bedrock, sand flats, cutbank and mat-filled channels, hardground-lined bays with EPS-rich mat particles, mangroves, EPS mats, polygonal mats, and mats with blistered surface texture. These facies were mapped onto a 15 cm/pixel visible light orthomosaic of the island generated from more than 1500 nadir images taken by a UAV at 350 m standoff distance. A corresponding stereogrammetric digital elevation map was generated from drone images and 910 DGPS measurements acquired during several island transects. More than 1000 TST measurements provide additional facies elevation constraints, control points for satellite-based water depth calculations, and means to cross-calibrate and reconstruct the topographic profile of bedrock exposed at the beach. Additionally, the thickness of the underlying Holocene sediment fill was estimated over several island transects using a depth probe. Sub-cm resolution drone-based orthophotos of microbial mats were used to quantify polygonal mat size and textures. The mapping results highlight that sedimentary and bio-facies (including mat morphology and fabrics) correlate strongly with elevation. Notably, mat morphology was observed to be highly sensitive to cm-scale variations in topography and water depth. The productivity metric NDVI was computed for mat and vegetation facies using nadir images from a UAV-mounted two-band red-NIR camera. In combination with in situ facies mapping, these measurements provided ground truth for reduction of multispectral Landsat and Worldview-2 satellite images to evaluate mat distribution and diversity across a range of spatial and spectral facies variations.

50 Myr. in a serpentinite subduction channel: Insights into slow eclogite exhumation

NASA Astrophysics Data System (ADS)

Flores, K. E.; Bonnet, G.; Cai, Y.; Martin, C.; Hemming, S. R.; Brueckner, H. K.; Harlow, G. E.

2017-12-01

Modern petrochronology shows that the exhumation of metamorphosed oceanic rocks in subduction zones is commonly a brief process (<10-20 Ma) characterized by rates of 2-5 km/Ma. This rapid exhumation is essential to avoid complete retrogression of high grade assemblages during ascension. However, our multi-approach P-T-t results on retrograde eclogites from the Northern Motagua Mélange (NMM) in Guatemala challenges those previous findings because they record remarkably slower exhumation rates ( 1 km/Ma). The retrograde eclogites occur as cm to tens of m sized blocks within a serpentinite matrix mélange that also contains blocks of subgreenschist to amphibolite and blueschist facies metabasites, jadeitites, omphacitites, albitites, mica-rocks, metatrondhjemites, and minor low grade metasediments. The studied samples range from almost unaltered eclogites to retrograde blueschist and ep-amphibolite facies metabasites containing eclogite relicts. The successive assemblages define classical clockwise P-T paths: comprised of (a) prograde blueschist/eclogite facies metamorphism within garnet cores, (b) eclogite facies peak recrystallization at 2.1 GPa and 500°C, (c) post-peak blueschist facies recrystallization, (d) amphibolite facies overprinting, and (e) late stage greenschist facies retrogression. This complex polymetamorphic history defines an exhumation path with a metamorphic peak at 136-125 Ma (Sm-Nd mineral isochrons) at 70 km depth, an ascent to the middle section of a subduction channel ( 40 km) at 99-92 Ma (Ar-Ar in Ph), and exhumation to 25-20 km at 80-75 Ma (Ar-Ar in Mhb). Synchronous jadeitite and mica-rocks yielded crystallization and exhumation ages of 95 Ma (U-Pb in Zrn) and 77-53 Ma (Ar-Ar in Ph), respectively. In contrast, an associated eclogite-bearing sheet of continental crust shows a younger eclogite metamorphic peak of 77-75 Ma at 80 km depth, but similar exhumation ages of 76-66 Ma and near surface regional exposure at 30 Ma (AFT). These new data argues for significantly low exhumation rate of 1 km/Ma, which satisfactorily explains the highly retrograde nature of most eclogites and the well documented rock-fluids interactions inside a serpentinite subduction channel. However, it contradicts most current buoyancy- low viscosity driven exhumation models.

Response of Late Cretaceous migrating deltaic facies systems to sea level, tectonics, and sediment supply changes, New Jersey Coastal Plain, U.S.A.

USGS Publications Warehouse

Kulpecz, A.A.; Miller, K.G.; Sugarman, P.J.; Browning, J.V.

2008-01-01

Paleogeographic, isopach, and deltaic lithofacies mapping of thirteen depositional sequences establish a 35 myr high resolution (> 1 Myr) record of Late Cretaceous wave- and tide-influenced deltaic sedimentation. We integrate sequences defined on the basis of lithologic, biostratigraphic, and Sr-isotope stratigraphy from cores with geophysical log data from 28 wells to further develop and extend methods and calibrations of well-log recognition of sequences and facies variations. This study reveals the northeastward migration of depocenters from the Cenomanian (ca. 98 Ma) through the earliest Danian (ca. 64 Ma) and documents five primary phases of paleodeltaic evolution in response to long-term eustatic changes, variations in sediment supply, the location of two long-lived fluvial axes, and thermoflexural basement subsidence: (1) Cenomanian-early Turonian deltaic facies exhibit marine and nonmarine facies and are concentrated in the central coastal plain; (2) high sediment rates, low sea level, and high accommodation rates in the northern coastal plain resulted in thick, marginal to nonmarine mixed-influenced deltaic facies during the Turonign-Coniacian; (3) comparatively low sediment rates and high long-term sea level in the Santonian resulted in a sediment-starved margin with low deltaic influence; (4) well-developed Campanian deltaic sequences expand to the north and exhibit wave reworking and longshore transport of sands, and (5) low sedimentation rates and high long-term sea level during the Maastrichtian resulted in the deposition of a sediment-starved glauconitic shelf. Our study illustrates the widely known variability of mixed-influence deltaic systems, but also documents the relative stability of deltaic facies systems on the 106-107 yr scale, with long periods of cyclically repeating systems tracts controlled by eustasy. Results from the Late Cretaceous further show that although eustasy provides the template for sequences globally, regional tectonics (rates of subsidence and accommodation), changes in sediment supply, proximity to sediment input, and flexural subsidence from depocenter loading determines the regional to local preservation and facies expression of sequences. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).

Tectonic and climatic controls on continental depositional facies in the Karoo Basin of northern Natal, South Africa

NASA Astrophysics Data System (ADS)

Turner, Brian R.

1986-02-01

The eastern Karoo Basin, South Africa, contains a thick sequence of terrigenous clastic sediments comprising a meanderbelt facies, braided channel facies divided into coarse and fine subfacies, fluviolacustrine facies and aeolian facies. Depositional trends and changes in fluvial style reflect a progressive increase in aridity of the climate under stable tectonic conditions, interrupted by two phases of source area tectonism and the development of fine and coarse clastic wedges of the braided channel subfacies; the latter signifying a short interlude of cool, wet conditions. The fine braided channel subfacies occurs in the upper part of the meanderbelt facies, which was deposited by ephemeral, meandering mixed-load streams of variable discharge and sinuosity, under dry, semi-arid climatic conditions. These deposited complex, internally discordant channel sands and well-developed levee deposits. Following deposition of the coarse braided channel subfacies semi-arid conditions returned and fluvial deposition was dominated by ephemeral, straight to slightly sinuous mixed load streams characterised by simple channel sand bodies. As the aridity of the climate increased, the streams became more localised and carried an increasing proportion of fines. Interbedded with and overlying the fluvial deposits is a mudstone-dominated lacustrine sequence grading up into aeolian sands suggesting a playa lake-type situation. The general absence of evaporites from these sediments is attributed to the fresh nature of the lake waters, as evidenced by the freshwater aquatic organisms and clay-mineral suite, the lack of adequate inflow for solute accumulation and the removal of dust impregnated by salts from the surface of the dry lake bed during the dry season by superheated, upward-spiralling columns of air. Broadly similar environments to the fluvio-lacustrine and aeolian facies sequence are to be found in the Lake Eyre Basin of central Australia and the Okavango "delta" of northern Botswana. The Okavango "delta" model has an important bearing on patterns of fluvial sedimentation in arid regions since it shows many characteristics of temperate, well-vegetated anastomosed fluvial systems despite its location in the Kalahari Desert.

Late Pleistocene and Holocene sedimentary facies on the Ebro continental shelf

USGS Publications Warehouse

Diaz, J.; Nelson, C.H.; Barber, J.H.; Giro, S.

1990-01-01

Late Pleistocene-Holocene history of the Ebro continental shelf of northeastern Spain is recorded in two main sedimentary units: (1) a lower, transgressive unit that covers the shelf and is exposed on the outer shelf south of 40??40???N, and (2) an upper, progradational, prodeltaic unit that borders the Ebro Delta and extends southward along the inner shelf. The lower transgressive unit includes a large linear shoal found at a water depth of 90 m and hardground mounds at water depths of 70-80 m. Some patches of earlier Pleistocene prodelta mud remain also, exposed or covered by a thin veneer of transgressive sand on the northern outer shelf. This relict sand sheet is 2-3 m thick and contains 9000-12,500 yr old oyster and other shells at water depths of 78-88 m. The upper prodelta unit covers most of the inner shelf from water depths of 20-80 m and extends from the present Ebro River Delta to an area to the southwest where the unit progressively thins and narrows. Interpretation of high-resolution seismic reflection data shows the following facies occurring progressively offshore: (1) a thick stratified facies with thin progradational "foresets beds", (2) a faintly laminated facies with sparse reflectors of low continuity, and (3) a thin transparent bottomset facies underlain by a prominent flat-lying reflector. Deposition in the northern half of the prodelta began as soon as the shoreline transgressed over the mid-shelf, but progradation of the southern half did not begin until about 1000-3000 yrs after the transgression. A classic deltaic progradational sequence is shown in the Ebro prodelta mud by (1) gradation of seismic facies away from the delta, (2) coarsening-upward sequences near the delta and fining-upward sequences in the distal mud belt deposits, and (3) thin storm-sand layers and shell lags in the nearshore stratified facies. The boundaries of the prodeltaic unit are controlled by increased current speeds on the outer shelf (where the shelf narrows) and by development of the shoreface sand body resulting from shoaling waves on the inner shelf. ?? 1990.

Occurrence of inter-eruption debris flow and hyperconcentrated flood-flow deposits on Vesuvio volcano, Italy

NASA Astrophysics Data System (ADS)

Lirer, L.; Vinci, A.; Alberico, I.; Gifuni, T.; Bellucci, F.; Petrosino, P.; Tinterri, R.

2001-02-01

In the period between AD 79 and AD 472 eruptions, inter-eruption debris flow and hyperconcentrated-flood-flow deposits were deposited in the Somma-Vesuvio areas. These deposits, forming cliffs at the Torre Bassano and Torre Annunziata, were generated by highly erosive floods, whose erosive capacity was enhanced by acceleration due to the steepness of the volcano slopes. In this type of deposits were distinguished five depositional facies (from A to E) outcropping well at Torre Bassano where they are stacked in three fining-upward (FU) sequences, probably representing three forestepping — backstepping episodes in the emplacement area of gravity flows. These five facies from coarse to fine are interpreted to represent the downcurrent evolution of particular composite sediment gravity flows characterized by horizontal segregation of the main grain-size population. The blocking of these highly concentrated composite parent flows would first produce the deposition of the coarse front part to form facies A and then the overriding of this deposit by the bipartite flow, which constitutes the body of the flow. This flow is composed of a highly concentrated basal inertia carpet responsible for the deposition of facies B, C and D and an upper hyperconcentrated flood flow that forms facies E, through traction plus fallout processes, respectively. Finally, the occurrence of "lahar" type events at Somma-Vesuvio region even at present times is discussed.

Development of Miocene-Pliocene reef trend, St. Croix, U. S. Virgin Islands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gill, I.; Eby, D.E.; Hubbard, D.K.

1988-01-01

The Miocene-Pliocene reef trend on St. Croix, U.S. Virgin Islands, rims the present southern western coasts of the island and includes accompanying lagoonal and forereef facies. The reef trend was established on a foram-algal bank facies that represents basinal shallowing from the deep-water pelagic and hemipelagic facies of the Miocene Kingshill Limestone. Information on facies distribution and thickness is derived from rock exposures and 22 test wells drilled to a maximum depth of 91 m. The greatest thickness of the reef facies exists in a subsidiary graben on the south coast of St. Croix. The thickness of the reef sectionmore » in this locality is due to preservation of the section in a downdropped block. Reef faunas include extant corals, as well as several extinct genera. Extant corals (e.g. Montastrea annularis, Diploria sp., and Porites porites) and extinct corals (e.g., Stylophora affinis, Antillea bilobata, and Thysanus sp.) are the main reef frame-builders. Coralline algea and large benthic foraminifera are significant contributors to the sediments both prior to and during scleractinian reef growth. Dolomitization and calcite cementation occur prominantly in an area corresponding to a Holocene lagoon. The spatial distribution of the dolomite suggests that the lagoon is a Tertiary feature directly related to the dolomitization process. Stable isotopic values suggest dolomitization of fluids of elevated salinity.« less

Cyclic transgressive and regressive sequences, Paleocene Suite, Sirte basin, Libya

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abushagur, S.A.

1986-05-01

The Farrud lithofacies represent the main reservoir rock of the Ghani oil field and Western Concession Eleven of the Sirte basin, Libya. Eight microfacies are recognized in the Farrud lithofacies in the Ghani field area: (1) bryozoan-bioclastic (shallow, warm, normal marine shelf deposits); (2) micrite (suggesting quiet, low-energy conditions such as may have existed in a well-protected lagoon); (3) dasycladacean (very shallow, normal marine environment); (4) bioclastic (very shallow, normal marine environment with moderate to vigorous energy); (5) mgal (very shallow, normal marine environment in a shelf lagoon); (6) pelletal-skeletal (deposition within slightly agitated waters of a sheltered lagoon withmore » restricted circulation); (7) dolomicrite (fenestrate structures indicating a high intertidal environment of deposition); and (8) anhydrite (supratidal environment). The Paleocene suite of the Farrud lithofacies generally shows a prograding, regressive sequence of three facies: (1) supratidal facies, characterized by nonfossiliferous anhydrite, dolomite, and dolomitic pelletal carbonate mudstone; (2) intertidal to very shallow subtidal facies, characterized by fossiliferous, pelletal, carbonate mudstone and skeletal calcarenite; and (3) subtidal facies, characterized by a skeletal, pelletal, carbonate mudstone. Source rocks were primarily organic-rich shales overlying the Farrud reservoir rock. Porosity and permeability were developed in part by such processes as dolomitization, leaching, and fracturing in the two progradational, regressive carbonate facies. Hydrocarbons were trapped by a supratidal, anhydrite cap rock.« less

Sedimentation and tectonics in the southern Bida Basin, Nigeria: depositional response to varying tectonic context

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braide, S.P.

1990-05-01

The Upper Cretaceous Bida basin of central Nigeria is sandwiched between the Precambrian schist belts of the Northern Nigerian massif and the West African craton. Of interest is the southern part of the basin, which developed in continental settings, because the facies architecture of the sedimentary fill suggests a close relation between sedimentation dynamics and basin margin tectonics. This relationship is significant to an understanding of the basin's origin, which has been controversial. A simple sag and rift origin has been suggested, and consequently dominated the negative thinking on the hydrocarbon prospects of the basin which were considered poor. Thismore » detailed study of the facies indicates rapid basin-wide changes from various alluvial fan facies through flood-basin and deltaic facies to lacustrine facies. Paleogeographic reconstruction suggests lacustrine environments were widespread and elongate. Lacustrine environments occurred at the basin's axis and close to the margins. This suggests the depocenter must have migrated during the basin's depositional history and subsided rapidly to accommodate the 3.5-km-thick sedimentary fill. Although distinguishing pull-apart basins from rift basins, based solely on sedimentologic grounds, may be difficult, the temporal migration of the depocenter, as well as the basin architecture of upward coarsening cyclicity, show a strong tectonic and structural overprint that suggests a tectonic framework for the Southern Bida basin similar in origin to a pull-apart basin.« less

Hydrocarbon potential of the Early Oligocene Menilite shales in the Eastern Outer Carpathians (Tarcău and Vrancea Nappes, Romania)

NASA Astrophysics Data System (ADS)

Wendorff, Małgorzata; Rospondek, Mariusz; Kluska, Bartosz; Marynowski, Leszek

2017-04-01

During Oligocene to early Miocene time an extensive accumulation of organic-rich sedimentary rocks occurred in entire Paratethyan Basin, including its central part, i.e. the Carpathian Foredeep basin. Rocks of so-called Menilite facies formed there, burying significant amounts of organic matter (OM). These Menilite shales are now widely considered as a source of hydrocarbons throughout the Carpathian region. For the purpose of presented study, rock samples of the Menilite facies (mainly of the Lower Menilite and Bituminous Marl Members) were collected from two sections located in the different tectonic units (the Tarcău and Vrancea Nappes, Romania) of the Outer Carpathians. The main goal of the study was to assess and compare their hydrocarbon potential by examination of bulk geochemistry (total organic carbon content, pyrolysis Rock-Eval), vitrinite reflectance (Ro) and application of lipid biomarker parameters. The data show high variability in OM quantity and quality. Total organic carbon (TOC) content reaches peak values in the siliceous facies of the Lower Menilite Member (up to 8.6 wt% TOC), which contains type II kerogen represented by mainly marine OM type. Such results are confirmed by the presence of short-chain n-alkanes and hopanes. Mixed type II/III kerogen gains importance together with increasing contribution of turbiditic sedimentation. Terrigenous input is marked by occurrence of conifer aromatic biomarkers (such as simonellite, retene and 1,2,3,4-tetrahydroretene) and odd over even long chain n-alkanes predominance, characteristic for epicuticular leaf waxes. The analysed source rocks can be classified as oil-prone and subordinately mixed oil/gas-prone. OM in the inner tectonic unit (Tarcău Nappe; Tmax 430° C, Ro 0.5%) reaches onset of hydrocarbon generation, while in the outer unit (Vrancea Nappe) OM is immature (Tmax 425° C, Ro 0.4%). This maturity trend may be an effect of different burial histories of these units, as well as variation in subsequent erosion and exhumation levels resulting from the more inner position of the Tarcău Nappe within the orogen relative to the Vrancea Nappe (Wendorff et al., 2017). Based on the TOC content, S1 and S2 peak values the investigated rocks from the Vrancea Nappe reveal good to even excellent petroleum potential (especially for the siliceous facies of the Lower Menilite Mb.), although they did not attain the oil-window stage. The Tarcău Nappe source rocks have fair to good hydrocarbon potential. Hydrocarbons have been locally generated due to sufficient maturity, as also confirmed by high extractable bitumen yields and field observation of solid bitumen veins. However, hydrocarbon potential has not been exhausted as revealed by still high hydrocarbon index values. In the studied area the rocks of the Menilite facies have been suggested as a source for small gas/oil deposits, i.e. the Cuejdiu and Moineşti/Comăneşti field. References Wendorff, M., Rospondek, M., Kluska, B., Marynowski, L., 2017. Organic matter maturity and hydrocarbon potential of the Lower Oligocene Menilite facies in the Eastern Flysch Carpathians (Tarcău and Vrancea Nappes), Romania. Applied Geochemistry (in press).

Zircon (Hf, O isotopes) as melt indicator: Melt infiltration and abundant new zircon growth within melt rich layers of granulite-facies lenses versus solid-state recrystallization in hosting amphibolite-facies gneisses (central Erzgebirge, Bohemian Massif)

NASA Astrophysics Data System (ADS)

Tichomirowa, Marion; Whitehouse, Martin; Gerdes, Axel; Schulz, Bernhard

2018-03-01

In the central Erzgebirge within the Bohemian Massif, lenses of high pressure and ultrahigh pressure felsic granulites occur within meta-sedimentary and meta-igneous amphibolite-facies felsic rocks. In the felsic granulite, melt rich parts and restite form alternating layers, and were identified by petrology and bulk rock geochemistry. Mineral assemblages representing the peak P-T conditions were best preserved in melanocratic restite layers. In contrast, in the melt rich leucocratic layers, garnet and related HP minerals as kyanite are almost completely resorbed. Both layers display differences in accessory minerals: melanosomes have frequent and large monazite and Fe-Ti-minerals but lack xenotime and apatite; leucosomes have abundant apatite and xenotime while monazite is rare. Here we present a detailed petrographic study of zircon grains (abundance, size, morphology, inclusions) in granulite-facies and amphibolite-facies felsic gneisses, along with their oxygen and hafnium isotope compositions. Our data complement earlier Usbnd Pb ages and trace element data (REE, Y, Hf, U) on zircons from the same rocks (Tichomirowa et al., 2005). Our results show that the degree of melting determines the behaviour of zircon in different layers of the granulites and associated amphibolite-facies rocks. In restite layers of the granulite lenses, small, inherited, and resorbed zircon grains are preserved and new zircon formation is very limited. In contrast, new zircons abundantly grew in the melt rich leucocratic layers. In these layers, the new zircons (Usbnd Pb age, trace elements, Hf, O isotopes) best preserve the information on peak metamorphic conditions due to intense corrosion of other metamorphic minerals. The new zircons often contain inherited cores. Compared to cores, the new zircons and rims show similar or slightly lower Hf isotope values, slightly higher Hf model ages, and decreased oxygen isotope ratios. The isotope compositions (Hf, O) of new zircons indicate partial Hf isotope homogenization in the melt, and melt infiltration from an external source. New zircon was most likely formed by a peritectic reaction with melt above the wet solidus (peritectic zircon). Conversely, the amphibolite-facies host gneisses lack indications of significant melt production. Pre-metamorphic zircons experienced mainly solid-state recrystallization and variable Pb loss with only minor new zircon formation. However, subtle changes in cathodoluminescence pattern, in the Hf and O isotopes, and in the Lu/Hf, Yb/Hf ratios of zircons suggest that small volumes of melt were locally present. In difference to granulites, melt was internally produced. The detection of low degree melts (inferred from zircon geochemistry) is extremely important for the rheology because these amphibolite-facies rocks could act as large scale ductile shear zones. The new zircon data support a different P-T path for closely spaced amphibolite- and granulite-facies rocks.

Reconnaissance Marine Geophysical Survey for the Shallow Water Acoustics Program

DTIC Science & Technology

2013-09-30

Swift, D.J.P. (Ed.), Shelf Sand and Sandstone Bodies: Geometry, Facies and Sequence Stratigraphy, Wiley, Hoboken, New Jersey, Spec. Publs. Int. Ass...sequences, their component system tra cts, and bounding surfaces. In Swift, D.J.P. (Ed.), Shelf Sand and Sandstone Bodies: Geometry, Facies and Sequence

Glacial-marine sediments record ice-shelf retreat during the late Holocene in Beascochea Bay on the western margin of the Antarctic Peninsula

NASA Astrophysics Data System (ADS)

Hardin, L. A.; Wellner, J. S.

2010-12-01

Beascochea Bay has an overall rapid rate of sedimentation due to retreating fast-flowing ice, and thus contains high-resolution records of Antarctica’s glacial and climate history. Beascochea Bay is a 16 km long by 8 km wide bay located on the western margin of the Antarctica Peninsula, centered between Anvers Island and Renaud Island, but open to the Bellingshausen Sea. Currently, three tidewater glaciers draining the Bruce Plateau of Graham Land enter into the fjords of Beascochea Bay, releasing terrigenous sediments which have left a record of the fluctuations of the Antarctic Peninsula Ice Cap since the grounded ice decoupled from the seafloor after the last glacial maximum. These three glaciers have played a significant role in providing sediment to the main basin, allowing a detailed sediment facies analysis to be conducted from eight sediment cores which were collected during the austral summer of 2007. Pebbly silty clay sediment cores, along with 3.5 kHz seismic data and multibeam swath bathymetry data, are integrated to reconstruct a glacial retreat timeline for the middle to late Holocene, which can be compared to the recent retreat rates over the last century. Paleoenvironment of deposition is determined by mapping lateral facies changes from the side fjords (proximal) to the outer basin (distal), as each region records the transition from glacial-marine sediments to open-marine sediments. As the ice retreated from the outer basin to the inner basin, and most recently leaving the side fjords, each facies deposited can be age-constrained by radiocarbon, 210Pb, and 137Cs dating methods. A distinct 137Cs signal is readily seen in two kasten cores from a side fjord and the inner basin of Beascochea Bay. This dating method revealed an average sedimentation rate of 2.7 mm per year for approximately the last century, which is comparable to 210Pb rates obtained in other studies. Lithology variations in each sediment core record indications of ice-shelf influence in Beascochea Bay throughout the Holocene deglaciation. The distinctively laminated sub-ice shelf facies can be clearly seen in the x-rays of these cores, and can be easily distinguished from the poorly sorted glacial-marine facies and the greenish finer-grained facies deposited in open-marine conditions. A 14 m long sediment core taken from the outer basin of Beascochea Bay recovered the greatest length of sediment and dates back to the middle Holocene. X-rays of this core show a possible mid-Holocene retreat of the ice shelf followed by intermittent advance and retreat that precedes the most recent retreat. The inner basin of Beascochea Bay has been without an ice shelf for the last 200 years, based on the sedimentation rates of the last century projected downcore.

Space shuttle orbiter avionics software: Post review report for the entry FACI (First Article Configuration Inspection). [including orbital flight tests integrated system

NASA Technical Reports Server (NTRS)

Markos, H.

1978-01-01

Status of the computer programs dealing with space shuttle orbiter avionics is reported. Specific topics covered include: delivery status; SSW software; SM software; DL software; GNC software; level 3/4 testing; level 5 testing; performance analysis, SDL readiness for entry first article configuration inspection; and verification assessment.

Microfaunal analysis of late Quaternary deposits of the northern Bering Sea.

USGS Publications Warehouse

McDougall, K.

1982-01-01

Holocene microfaunal associations and distribution patterns define three inner-shelf (1-20m) biofacies in Norton Sound, northern Bering Sea. The Holocene facies relations are the basis for interpreting early Holocene and late Pleistocene environmental conditions in the NE Bering Sea area. Norton Sound cores provide evidence of two marine transgressions and a varying river input.-from Author

The geostatistical approach for structural and stratigraphic framework analysis of offshore NW Bonaparte Basin, Australia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wahid, Ali, E-mail: ali.wahid@live.com; Salim, Ahmed Mohamed Ahmed, E-mail: mohamed.salim@petronas.com.my; Yusoff, Wan Ismail Wan, E-mail: wanismail-wanyusoff@petronas.com.my

2016-02-01

Geostatistics or statistical approach is based on the studies of temporal and spatial trend, which depend upon spatial relationships to model known information of variable(s) at unsampled locations. The statistical technique known as kriging was used for petrophycial and facies analysis, which help to assume spatial relationship to model the geological continuity between the known data and the unknown to produce a single best guess of the unknown. Kriging is also known as optimal interpolation technique, which facilitate to generate best linear unbiased estimation of each horizon. The idea is to construct a numerical model of the lithofacies and rockmore » properties that honor available data and further integrate with interpreting seismic sections, techtonostratigraphy chart with sea level curve (short term) and regional tectonics of the study area to find the structural and stratigraphic growth history of the NW Bonaparte Basin. By using kriging technique the models were built which help to estimate different parameters like horizons, facies, and porosities in the study area. The variograms were used to determine for identification of spatial relationship between data which help to find the depositional history of the North West (NW) Bonaparte Basin.« less

Contrasting Holocene sedimentary geologies of lower Daly River, northern Australia, and lower Sepik-Ramu, Papua New Guinea

NASA Astrophysics Data System (ADS)

Chappell, John

1993-03-01

The estuarine plain of the macrotidal Daly River, in monsoonal northern Australia, is underlain by extensive mid-Holocene mangrove swamp sediments which accumulated during the last stages of Post-glacial sea-level rise. Sediment yield from the catchment is too low to account for the volume which accumulated during sea-level rise, and onshore transport is invoked. This is supported by radiocarbon ages and facies analysis of the transgressive sediment tract beneath the maximum flooding surface (MFS), and of the tract of vertical sedimentation which extends from the MFS to the surface of estuarine/fluvial transition (the EFT). The EFT occurred about 5000 to 6000 BP throughout the estuarine plain. A contrasting situation exists in the lowland Holocene basin of the microtidal Sepik and Ramu rivers in Papua New Guinea, which derive sediment from highly tectonic catchments. A tectonic basin, which was a shallow brackish inland sea after Post-glacial transgression, is separated by a low divide from a deltaic plain. Progradation of the deltaic plain commenced about 3500 BP after regressive sedimentation eclipsed the inland sea in the tectonic basin. Contrasting organic facies, mangrove in the Daly and freshwater swamp deposits in the Sepik-Ramu, highlight differences between facies models of the two systems. Differences between fluvio-tidal regimes are reflected by the EFT, which is synchronous in the Daly and diachronous in the Sepik-Ramu, and possibly by the MFS which is diachronous in the Daly and may be synchronous in the Sepik-Ramu.

Stratigraphy, sedimentology, and ichnology of the Late Pennsylvanian Glenshaw Formation (Lower Conemaugh Group), southern Dunkard basin, Ohio-Kentucky-West Virginia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martino, R.L.

Facies analysis of outcrops of the Glenshaw Formation was carried out at 45 localities over a 761 sq. km area. The glenshaw Formation is 61--76 m thick in the study area. Four marine units (Lower Brush Creek, Upper Brush Creek, Cambridge , and Ames) occur which contain invertebrate body fossils and/or trace fossils including Teichichnus, Rhizocorallium, Aulichnites, Paleophycus, Lockeia, and Curvolithus. Alluvial channel-fills contain internal features that reflect deposition in high sinuosity suspended or mixed load rivers. Paleocurrent data (N = 77) are broadly dispersed with a mean azimuth of 335 degrees. Overbank facies have yielded trackways from giant arthropodsmore » and Eryopoid amphibians (Limnopus). There are fewer marine units in the glenshaw than toward the north and west which has made direct detailed correlation of much of the formation problematic. The coal beds and marine units used previous stratigraphic studies may be extended through the recognition of non-coal-bearing paleosols and marine-influenced intervals distinguished by facies relations, and sedimentary and biogenic structures. Nine laterally persistent, paleosol-bounded packages occur which are comparable to allocyclic T-R units reported by Busch and Rollins (1984) from Pennsylvania and Ohio. Alternating episodes of soil formation and alluvial aggradation may reflect updip coastal plain responses to low stand incision of drainage lines and sediment bypassing followed by aggradation of alluvial systems in response to rising sea level. Climate changes may also have played a role in sediment flux.« less

Reservoir characterization and preliminary modeling of deltaic facies, lower Wilcox, Concordia Parish, Louisiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schenewerk, P.; Goddard, D.; Echols, J.

The decline in production in several fields in Concordia Parish, Louisiana, has created interest in the economic feasibility of producing the remaining bypassed oil in the lower Wilcox Group. One of these fields, Bee Brake, has been one of the more prolific oil-producing fields in east-central Louisiana. The producing interval, the Minter sandstones, at a depth of about 6,775 ft typically consists of an upper Bee Brake sandstone and a lower Angelina sandstone. A detailed study of a conventional core in the center of the field reveals a 15-ft-thick Minter interval bounded above and below by sealing shales and lignitesmore » of lower delta plain marsh facies. The upper 4-ft-thick Bee Brake is a very fine silty sandstone with characteristics of a small overbank or crevasse splay deposit. The lower 3-ft-thick oil-producing Angelina sandstone consists of very fine and fine sandstone of probable overbank or crevasse facies. Cumulative production from the Angelina is about 1.8 million stock-tank barrels of oil. Special core analysis data (capillary pressure, relative permeability, and waterflood recovery) have been used to develop a simulation model of the two reservoirs in the Minter. This model incorporates the geologic and engineering complexities noted during evaluation of the field area. Operators can use the model results in this field to design an optimal development plan for enhanced recovery.« less

Can high resolution topographic surveys provide reliable grain size estimates?

NASA Astrophysics Data System (ADS)

Pearson, Eleanor; Smith, Mark; Klaar, Megan; Brown, Lee

2017-04-01

High resolution topographic surveys contain a wealth of information that is not always exploited in the generation of Digital Elevation Models (DEMs). In particular, several authors have related sub-grid scale topographic variability (or 'surface roughness') to particle grain size by deriving empirical relationships between the two. Such relationships would permit rapid analysis of the spatial distribution of grain size over entire river reaches, providing data to drive distributed hydraulic models and revolutionising monitoring of river restoration projects. However, comparison of previous roughness-grain-size relationships shows substantial variability between field sites and do not take into account differences in patch-scale facies. This study explains this variability by identifying the factors that influence roughness-grain-size relationships. Using 275 laboratory and field-based Structure-from-Motion (SfM) surveys, we investigate the influence of: inherent survey error; irregularity of natural gravels; particle shape; grain packing structure; sorting; and form roughness on roughness-grain-size relationships. A suite of empirical relationships is presented in the form of a decision tree which improves estimations of grain size. Results indicate that the survey technique itself is capable of providing accurate grain size estimates. By accounting for differences in patch facies, R2 was seen to improve from 0.769 to R2 > 0.9 for certain facies. However, at present, the method is unsuitable for poorly sorted gravel patches. In future, a combination of a surface roughness proxy with photosieving techniques using SfM-derived orthophotos may offer improvements on using either technique individually.

Sequence stratigraphy of the Lower Cenomanian Bahariya Formation, Bahariya Oasis, Western Desert, Egypt

NASA Astrophysics Data System (ADS)

Catuneanu, O.; Khalifa, M. A.; Wanas, H. A.

2006-08-01

The Lower Cenomanian Bahariya Formation corresponds to a second-order depositional sequence that formed within a continental shelf setting under relatively low-rate conditions of positive accommodation (< 200 m during 3-6 My). This overall trend of base-level rise was interrupted by three episodes of base-level fall that resulted in the formation of third-order sequence boundaries. These boundaries are represented by subaerial unconformities (replaced or not by younger transgressive wave ravinement surfaces), and subdivide the Bahariya Formation into four third-order depositional sequences. The construction of the sequence stratigraphic framework of the Bahariya Formation is based on the lateral and vertical changes between shelf, subtidal, coastal and fluvial facies, as well as on the nature of contacts that separate them. The internal (third-order) sequence boundaries are associated with incised valleys, which explain (1) significant lateral changes in the thickness of incised valley fill deposits, (2) the absence of third-order highstand and even transgressive systems tracts in particular areas, and (3) the abrupt facies shifts that may occur laterally over relatively short distances. Within each sequence, the concepts of lowstand, transgressive and highstand systems tracts are used to explain the observed lateral and vertical facies variability. This case study demonstrates the usefulness of sequence stratigraphic analysis in understanding the architecture and stacking patterns of the preserved rock record, and helps to identify 13 stages in the history of base-level changes that marked the evolution of the Bahariya Oasis region during the Early Cenomanian.

Forward Analyses of Dehydration Reactions in Mafic Rocks Along the P-T Trajectories of the Subducting Slabs

NASA Astrophysics Data System (ADS)

Kuwatani, T.; Okamoto, A.; Toriumi, M.

2005-12-01

Fluids in the subduction zone play an important role in magmatism, metamorphism, and mechanical processes involving seismic activity. Additionally, recent geophysical researches found low-frequency tremors which may be related to the movement of fluid (Obara, 2002) and a zone of high Poisson_fs ratio which reflects high pore fluid pressure (Kodaira et al.,2004) in the Southwest Japan fore-arc. It is widely accepted that these fluids are supplied by the dehydration of hydrous metamorphic minerals in the subducting oceanic plate. Although many previous studies attempted to estimate the water content of the subducting oceanic crust experimentally and theoretically (e.g., Schmidt and Poli, 1998; Hacker et al., 2003), there have been no studies which quantify the continuous dehydration reactions in detail. The aim of this study is to quantify the progress of the continuous dehydration reactions of mafic rocks in the condition of greenschist facies, corresponding to low-intermediate depth (10-50km) of warm subduction zone. We use the differential thermodynamics (Spear 1993) which include mass balance to predict the continuous metamorphic reaction history of mafic rocks along the P-T trajectory of the subducting slab. With fixed bulk chemical composition the thermodynamic system is divariant, as specified in Duhem_fs theorem. In differential thermodynamics, applying a series of changes in pressure and temperature (ΔP and ΔT, respectively) from initial conditions (P0, T0, X0s, M0s), we can trace ΔXs and ΔMs, that is, the progress (history) of the metamorphic reactions along the arbitrary P-T trajectory (Thermodynamic forward modeling). According to Okamoto and Toriumi, 2001, we modeled the greenschist/ blueschist/ (epidote -) amphibolite assemblage of mafic rocks, which consist of the following phases: Amphibole ± Epidote ± Chlorite + Plagioclase + Quartz + Fluid (H2O), in the system of Na2O - CaO - MgO - FeO - Fe2O3 - Al2O3 - SiO2 - H2O. The reference compositions and modes of minerals were assumed according to the natural sample of greenschist which has MORB-like bulk composition (Hacker et al. 2003). The reference temperature and pressure were set to be 300°C, 0.3GPa. Calculations were performed along the P-T paths of the Southwest Japan (4MPa/°C) and the Cape Mendocino (the North California, 2MPa/°C) predicted by Yamasaki and Seno, 2003. As a result, the water production rates have the peak depths at the boundary between the greenschist facies and the epidote-amphibolite facies in the Southwest Japan, and at the boundary between the greenschist facies and the amphibolite facies in the Cape Mendocino, respectively. Chlorite decomposition is the main dehydration reaction. These peak depths correspond to the zone of low frequency tremors, high Poisson_fs ratio and active seismicity (30-50km) in the Southwest Japan, and active seismicity (10-20km) in the Cape Mendocino, respectively.

A procedure for classifying textural facies in gravel-bed rivers

Treesearch

John M. Buffington; David R. Montgomery

1999-01-01

Textural patches (i.e., grain-size facies) are commonly observed in gravel-bed channels and are of significance for both physical and biological processes at subreach scales. We present a general framework for classifying textural patches that allows modification for particular study goals, while maintaining a basic degree of standardization. Textures are classified...

Getting to First Base: Prima Facie Arguments for Propositions of Value.

ERIC Educational Resources Information Center

Tuman, Joseph S.

1987-01-01

Argues that few clear standards exist for value debate. Defines values as instrumental or terminal, and identifies four prima facie burdens necessary for affirming a value resolution: value identification; value criteria; value hierarchy; and topicality through relevance. Examines the role of presumption and burden of proof in value debate. (MM)

Relationships between sedimentation, depositional environments, and coal quality: upper Potomac coalfield, West Virginia and Maryland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jake, T.R.

1987-09-01

Evaluations were made of sedimentation patterns and depositional environments from approximately 450 core logs and 225 surface exposures in the Upper Potomac coalfield. The relationships between the clastic depositional facies and the distribution and quality of the Bakerstown and upper Freeport coals were also investigated. Data from 61 Bakerstown and 35 upper Freeport coal samples from selected cores indicate a change from uniform coal quality to highly variable coal quality when moving from related interchannel and bay-fill facies to channel, channel-fill, levee, and crevasse-splay facies. Areas of uniform coal quality range from 20-26% ash and 55-62% fixed carbon (weight percent,more » dry basis), whereas areas of highly variable coal quality range from 26-54% ash and 33-55% fixed carbon. The channel and related facies represent areas where increased fresh water was introduced into the topogenous swamp system, causing increased microbial degradation and the concentration of authigenic minerals within the peat material. These conditions, combined with the introduction of detrital minerals, resulted in areas of lower quality coal.« less

Calpionellid distribution and microfacies across the Jurassic/ Cretaceous boundary in western Cuba (Sierra de los Órganos)

NASA Astrophysics Data System (ADS)

López-Martínez, Rafael; Barragán, Ricardo; Reháková, Daniela; Cobiella-Reguera, Jorge Luis

2013-06-01

A detailed bed-by-bed sampled stratigraphic section of the Guasasa Formation in the Rancho San Vicente area of the "Sierra de los Órganos", western Cuba, provides well-supported evidence about facies and calpionellid distribution across the Jurassic/Cretaceous boundary. These new data allowed the definition of an updated and sound calpionellid biozonation scheme for the section. In this scheme, the drowning event of a carbonate platform displayed by the facies of the San Vicente Member, the lowermost unit of the section, is dated as Late Tithonian, Boneti Subzone. The Jurassic/Cretaceous boundary was recognized within the facies of the overlying El Americano Member on the basis of the acme of Calpionella alpina Lorenz. The boundary is placed nearly six meters above the contact between the San Vicente and the El Americano Members, in a facies linked to a sea-level drop. The recorded calpionellid bioevents should allow correlations of the Cuban biozonation scheme herein proposed, with other previously published schemes from distant areas of the Tethyan Domain.

Subsurface recognition of oolitic facies in carbonate sequence: Exploration and development applications: Ste. Genevieve Formation (Mississippian), Illinois basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandy, W.F.

1989-08-01

The oolitic grainstone facies of the Ste. Genevieve Limestone is a widespread and highly productive reservoir in the Illinois basin. However, exploration and development of these oolitic facies are hampered by the inability to recognize the reservoir on logs. In many areas, the only log data available are old wireline electric logs. Comparison of cores with log response in northern Lawrence field, Lawrence County, Illinois, indicates a subjective but predictable relationship between log signature and carbonate lithology. Two productive lithologies, dolomite and oolitic grainstone, display well-developed SP curves. However, resistivity response is greatest in dense limestone, less well developed inmore » oolitic grainstone, and poorly developed in dolomites. On gamma-ray logs, oolitic facies can be differentiated from dolomites by their lower radioactivity. Oolitic sands are most easily recognized on porosity logs, where their average porosity is 13.7%, only half the average porosity of dolomites. In a new well, the best information for subsequent offset and development of an oolitic reservoir is provided by porosity and dipmeter logs.« less

Relation between grain size and modal composition in deep-sea gravity-flow deposits. Example from the Voirons Flysch (Gurnigel nappe, Chablais Prealps, France)

NASA Astrophysics Data System (ADS)

Ragusa, Jérémy; Kindler, Pascal

2016-04-01

A coupled analysis of modal composition, grain size and sedimentary features of gravity-flow deposits in the Gurnigel nappe shows that the transition from coarse proximal to fine distal deposits is accompanied by a change in composition from siliciclastic to calcareous. Such compositional variation should be taken into account when interpretating deep-sea deposits if sampling is restricted to a single part of the fan. The Chablais Prealps (Haute-Savoie, France) represent a well-preserved accretionary wedge in the Western Alps. They comprise a stack of northward-thrusted sedimentary cover nappes originating from the Ultrahelvetic realm (distal part of the European margin) to the southern part of the Piemont Ocean. The present study focuses on the Voirons Flysch, belonging to the Gurnigel nappe, which includes four formations consisting of gravity-flow deposits (from bottom to top): (1) the Voirons Sandstone Fm., composed of channel to lobe deposits; (2) the Vouan Conglomerate Fm., represented by the proximal part of a channel system; (3) the Boëge Marls Fm., constituted by distal lobe deposits; finally, (4) the Bruant Sandstone Fm., which consists in channel to lobe deposits. Recent biostratigraphic results using planktonic foraminifers attributed a Middle to Late Eocene age to the Voirons Flysch, which was formerly believed to range from the Paleocene to the Middle Eocene (based on calcareous nannofossils). A total of 270 thin sections with stained feldspars were prepared, representing the four formations of the Voirons Flysch. Circa 300 extrabasinal grains were counted per thin section using the classic Indiana method. In addition, the quantity of intrabasinal grains (i.e. bioclasts, glauconite), cement and porosity was analysed. Cement was stained with alizarine and potassium ferrocyanide. 200 grain-size measurements on ca. 100 samples were performed using 3D conversion and statistical moment analysis. Sedimentary observations for each sampled bed were categorized following Mutti's turbiditic facies scheme. Cluster analysis on the composition of major grains discriminated 10 clusters which are merged into seven petrofacies (P1 - P7) following optical observations under the microscope: P1: poorly cemented porous arenite; P2: all porosity are filled by calcitic cement; P3: well-cemented volcano-clastic arenite; P4: red algae-rich highly cemented arenite to calcarenite; P5: highly cemented arenite; P6: globigerina-rich laminated calcarenite and P7: glauconitic quartzarenite. Grain-size distribution is grouped following the petrofacies. They provide a homogeneous distribution within each petrofacies with a gradual fining and progressively increasing sorting from P1 to P7. Moreover, Mutti's facies distribution indicates a progressive change towards more distal environments: from channel facies (F2 to F5) in P1-P3 to lobe facies (F8 to F9) in P4-P6. The washed composition of the P7 petrofacies is interpreted as distal turbidites that were reworked by bottom currents. The results presented here reveal a link between sand composition, grain size and gravity-flow facies. They highlight that composition of gravity flows is modified during their basinward transport. Consequently, coarse proximal deposits are more siliciclastic with limited filling of voids due to low carbonate contents. On the contrary, carbonate content increases significantly in the fine-grained calcarenites of the distal petrofacies. In distal settings, the segregation of light and porous foraminifera from the heavier siliciclastic fraction occurs under the increasing importance of traction currents.

Hydroclimatic variability in the Levant during the early last glacial (˜ 117-75 ka) derived from micro-facies analyses of deep Dead Sea sediments

NASA Astrophysics Data System (ADS)

Neugebauer, I.; Schwab, M. J.; Waldmann, N. D.; Tjallingii, R.; Frank, U.; Hadzhiivanova, E.; Naumann, R.; Taha, N.; Agnon, A.; Enzel, Y.; Brauer, A.

2016-01-01

The new sediment record from the deep Dead Sea basin (ICDP core 5017-1) provides a unique archive for hydroclimatic variability in the Levant. Here, we present high-resolution sediment facies analysis and elemental composition by micro-X-ray fluorescence (µXRF) scanning of core 5017-1 to trace lake levels and responses of the regional hydroclimatology during the time interval from ca. 117 to 75 ka, i.e. the transition between the last interglacial and the onset of the last glaciation. We distinguished six major micro-facies types and interpreted these and their alterations in the core in terms of relative lake level changes. The two end-member facies for highest and lowest lake levels are (a) up to several metres thick, greenish sediments of alternating aragonite and detrital marl laminae (aad) and (b) thick halite facies, respectively. Intermediate lake levels are characterised by detrital marls with varying amounts of aragonite, gypsum or halite, reflecting lower-amplitude, shorter-term variability. Two intervals of pronounced lake level drops occurred at ˜ 110-108 ± 5 and ˜ 93-87 ± 7 ka. They likely coincide with stadial conditions in the central Mediterranean (Melisey I and II pollen zones in Monticchio) and low global sea levels during Marine Isotope Stage (MIS) 5d and 5b. However, our data do not support the current hypothesis of an almost complete desiccation of the Dead Sea during the earlier of these lake level low stands based on a recovered gravel layer. Based on new petrographic analyses, we propose that, although it was a low stand, this well-sorted gravel layer may be a vestige of a thick turbidite that has been washed out during drilling rather than an in situ beach deposit. Two intervals of higher lake stands at ˜ 108-93 ± 6 and ˜ 87-75 ± 7 ka correspond to interstadial conditions in the central Mediterranean, i.e. pollen zones St. Germain I and II in Monticchio, and Greenland interstadials (GI) 24+23 and 21 in Greenland, as well as to sapropels S4 and S3 in the Mediterranean Sea. These apparent correlations suggest a close link of the climate in the Levant to North Atlantic and Mediterranean climates during the time of the build-up of Northern Hemisphere ice shields in the early last glacial period.

Minerals and clay minerals assemblages in organic-rich facies: the case study of the Sinemurian-Pliensbachian carbonate deposits of the western Lusitanian Basin (Portugal)

NASA Astrophysics Data System (ADS)

Caniço, Ana; Duarte, Luís V.; Silva, Ricardo L.; Rocha, Fernando; Graciano Mendonça Filho, João

2015-04-01

The uppermost Sinemurian-Pliensbachian series of the western part of the Lusitanian Basin is composed by hemipelagic carbonates particularly enriched in organic matter. Great part of this succession, considered to be one of the most important potential source rock intervals of Portugal, crops out in the S. Pedro de Moel and Peniche sectors, belonging to the Água de Madeiros and Vale das Fontes formations. In this study, supported by a detailed and integrated stratigraphic framework, we analyzed 98 marly samples (whole-rock mineralogy and clay minerals assemblages) from the aforementioned formations in the S. Pedro de Moel and Peniche sectors. X-ray Diffraction analysis followed the standard procedures and the semi-quantification of the different mineral phases was calculated using MacDiff 4.2.6. The goals of this work are to demonstrate the vertical variability of the mineral composition of these two units and investigate the relationship between the clay minerals assemblages and the content in organic matter (Total organic carbon: TOC). Besides the abundance of calcite and phyllosilicates, whole-rock mineralogy revealed the presence of quartz, potassium feldspar, dolomite, and pyrite (trace amounts). Other minerals like anhydrite, barite and gypsum occur sporadically. The clay minerals assemblages are dominated by illite+illite/smectite mixed-layers (minimum of 59%), always associated with kaolinite (maximum of 37%) and chlorite (maximum of 25%); sporadically smectite occurs in trace amounts. Generally, high TOC levels (i.e., black shale facies with TOC reaching up to 22 wt.% in both units, see Duarte et al., 2010), show a major increase in chlorite and kaolinite (lower values of illite+illite/smectite mixed layers). A kaolinite enrichment is also observed just above the Sinemurian-Pliensbachian boundary (base of Praia da Pedra Lisa Member of Água de Madeiros Formation; values varying between 30 and 37%). This event is associated with a second-order regressive phase, and marks the disappearance of the organic-rich facies and increase of carbonate sedimentation. This enrichment was likely favored by the development of more humid conditions at the Sinemurian-Pliensbachian transition. References Duarte, L.V., Silva, R.L., Oliveira, L.C.V., Comas-Rengifo, M.J., Silva, F. 2010. Organic-rich facies in the Sinemurian and Pliensbachian of the Lusitanian Basin, Portugal: Total Organic Carbon distribution and relation to transgressive-regressive facies cycles. Geologica Acta 8, 325-340.

Disentangling Holocene lake level changes with a transect of lake sediment cores - a case study from Lake Fürstenseer See, northeastern Germany

NASA Astrophysics Data System (ADS)

Dietze, Elisabeth; Slowinski, Michal; Kienel, Ulrike; Zawiska, Izabela; Brauer, Achim

2014-05-01

Deciphering the main processes contributing to lake and landscape evolution in the northern central European lowlands on different temporal scales is one of the main targets of the Virtual Institute of Integrated Climate and Landscape Evolution Analysis (ICLEA) of the Helmholtz Association. In the context of future climatic changes especially the hydrological system is a vulnerable landscape component that showed considerably large changes in the recent past. The analysis of lake sediment archives can help to infer long-term dynamics of regional lake and groundwater levels, although available proxy information needs to be studied carefully, as water level changes are only one trigger. Lake Fürstenseer See (53°19'N, 13°12'E, lake level in 2009: 63.3 m a.s.l.) formed after the retreat of the Weichselian ice sheet in a subglacial channel in the direct forefront of the Pommerian ice margin. The ~2 km2 large lake (zmax = 24.5 m) has a (sub-) surficial catchment area of ~(20) 40 km2 including other smaller lakes and peatlands. In the past, the lake system was artificially dammed for the operation of water mills. Located within the well-drained sandur substrate, the lake levels vary with groundwater levels in response to hydrological and catchment-related groundwater recharge. Detrital matter input from fluvial activity can be excluded. Lake sediment cores at four sites along a transect down to 23 m water depth show distinct sediment facies patterns. Stratigraphic descriptions and non-destructive continuous micro-XRF scanning allowed the differentiation of the main sediment facies, which were microscopically described using thin sections. Quantification of total organic and inorganic matter (TOC, TIC, C/N-composition) and discontinuous macrorest, diatom and Cladocera analysis helped to approach the sedimentation history. Stable isotopes of (delta-180, delta-13C) were used for characterization of carbonates. A high amount of non-reworked terrestrial plant remains from prominent facies shifts were dated with AMS-14C and allowed to link the different cores, assess individual sedimentation rates and to evaluate sediment focusing in the lake. Carbonatic and organic gyttjas are the main sedimentary components related mainly to authigenic production. Sometimes, carbonates show detrital mineral structures and correlations with allochthonous components (K, Ti, Si) that can only be provided by reworking of shore and slope material or in times of intense aeolian transport. Sandy facies dominate only at near-shore, steep sites and form distinct layers at the current sediment limit. A robust statistical analysis considering compositional data constraints allows an objective compilation of indications for lake level change from water depth-related habitat changes and shore erosion. They oppose detrital matter input from aeolian processes in times of anthropogenically-cleared forests. A first lake level reconstruction from the Early Holocene to recent times will be presented and linked to climatic and/or anthropogenic drivers of regional hydrological changes.

Storm and tide influenced depositional architecture of the Pliocene-Pleistocene Chad Formation, Chad Basin (Bornu Sub-basin) NE Nigeria: A mixed fluvial, deltaic, shoreface and lacustrine complex

NASA Astrophysics Data System (ADS)

Shettima, Bukar; Kyari, Aji Maina; Aji, Mallam Musa; Adams, Fatimoh Dupe

2018-07-01

Lithofacies analyses of the upper part of the Chad Formation (Bama Ridge Complex) in the Bornu Sub-basin of the Chad Basin indicated four facies associations; fluvial, deltaic, shoreface and lacustrine sequences. The fluvial sequences are composed of fining upward cycles with successive occurrence of planar crossbedded sandstone facies displaying unimodal paleocurrent system and rare mudstone facies typical of braided river system. The deltaic succession consists of both fining and coarsening upwards cycles with the former depicting fluvial setting of an upper delta plain while the later suggestive of mouth-bar sequences. The setting displays a polymodal current system of fluvial, waves, storms and tides that were primarily induced by complex interactions of seiches and lunar tides. Similar current systems devoid of fluvial patterns were reflected in the coarsening upward packages of the shoreface sequences. Lacustrine succession composed of thick bioturbated mudstone facies generally defines the base of these coarsening upward profiles, giving a fluvio-lacustrine geomorphic relief where complex interaction developed the deltaic and shoreface facies along its shorelines. Clay mineral fractions of the formation are dominantly kaolinitic, indicating a predominantly humid tropical-subtropical climatic condition during their deposition. This climatic regime falls within the African humid period of the early-mid Holocene that led to the third lacustrine transgression of the Lake Mega-Chad, whereas the subordinate smectite mineralization points to aridification that characterizes most of the post humid period to recent.

Major transgression during Late Cretaceous constrained by basin sediments in northern Africa: implication for global rise in sea level

NASA Astrophysics Data System (ADS)

An, Kaixuan; Chen, Hanlin; Lin, Xiubin; Wang, Fang; Yang, Shufeng; Wen, Zhixin; Wang, Zhaoming; Zhang, Guangya; Tong, Xiaoguang

2017-12-01

The global rise in sea level during the Late Cretaceous has been an issue under discussion by the international geological community. Despite the significance, its impact on the deposition of continental basins is not well known. This paper presents the systematic review on stratigraphy and sedimentary facies compiled from 22 continental basins in northern Africa. The results indicate that the region was dominated by sediments of continental facies during Early Cretaceous, which were replaced by deposits of marine facies in Late Cretaceous. The spatio-temporal distribution of sedimentary facies suggests marine facies deposition reached as far south as Taoudeni-Iullemmeden-Chad-Al Kufra-Upper Egypt basins during Turonian to Campanian. These results indicate that northern Africa underwent significant transgression during Late Cretaceous reaching its peak during Turonian to Coniacian. This significant transgression has been attributed to the global high sea-level during this time. Previous studies show that global rise in sea level in Late Cretaceous may have been driven by an increase in the volume of ocean water (attributed to high CO2 concentration and subsequently warm climate) and a decrease in the volume of the ocean basin (attributed to rapid production of oceanic crust and seamounts). Tectonic mechanism of rapid production of oceanic crust and seamounts could play a fundamental role in driving the global rise in sea level and subsequent transgression in northern Africa during Late Cretaceous.

New model of succession of Middle and Late Pennsylvanian fossil communities in north Texas, Mid-Continent, and Appalachians with implications on black shale controversy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boardman, D.R. II; Yancey, T.E.; Mapes, R.H.

1983-03-01

A new model for the succession of Pennsylvanian fossil communities, preserved in cyclothems, is proposed on the basis of more than 200 fossil localities in the Mid-Continent, Appalachians, and north Texas. Early models for Mid-Continent cyclothems placed the black shales in shallow water, with maximum transgression at the fusulinid-bearing zone in the overlying limestone. The most recent model proposed that the black phosphatic shales, which commonly occur between two subtidal carbonates, are widespread and laterally continuous over great distances and represent maximum transgression. The black phosphatic shales contain: ammonoids; inarticulate brachiopods; radiolarians; conularids; shark material and abundant and diverse conodonts.more » The black shales grade vertically and laterally into dark gray-black shales which contain many of the same pelagic and epipelagic forms found in the phosphatic black shales. This facies contains the deepest water benthic community. Most of these forms are immature, pyritized, and generally are preserved as molds. The dark gray-black facies grades into a medium gray shale facies which contains a mature molluscan fauna. The medium gray shale grades into a lighter gray facies, which is dominated by brachiopods, crinoids, and corals, with occasional bivalves and gastropods. (These facies are interpreted as being a moderate to shallow depth shelf community). The brachiopid-crinoid community is succeeded by shallow water communities which may have occupied shoreline, lagoonal, bay, interdeltaic, or shallow prodeltaic environments.« less

Variations in fluvial deposition on an alluvial plain: an example from the Tongue River Member of the Fort Union Formation (Paleocene), southeastern Powder River Basin, Wyoming, U.S.A.

USGS Publications Warehouse

Johnson, E.A.; Pierce, F.W.

1990-01-01

The Tongue River Member of the Paleocene Fort Union Formation is an important coal-bearing sedimentary unit in the Powder River Basin of Wyoming and Montana. We studied the depositional environments of a portion of this member at three sites 20 km apart in the southeastern part of the basin. Six lithofacies are recognized that we assign to five depositional facies categorized as either channel or interchannel-wetlands environments. (1) Type A sandstone is cross stratified and occurs as lenticular bodies with concave-upward basal surfaces; these bodies are assigned to the channel facies interpreted to be the product of low-sinuosity streams. (2) Type B sandstone occurs in parallel-bedded units containing mudrock partings and fossil plant debris; these units constitute the levee facies. (3) Type C sandstone typically lacks internal structure and occurs as tabular bodies separating finer grained deposits; these bodies represent the crevasse-splay facies. (4) Gray mudrock is generally nonlaminated and contains ironstone concretions; these deposits constitute the floodplain facies. (5) Carbonaceous shale and coal are assigned to the swamp facies. We recognize two styles of stream deposition in our study area. Laterally continuous complexes of single and multistoried channel bodies occur at our middle study site and we interpret these to be the deposits of sandy braided stream systems. In the two adjacent study sites, single and multistoried channel bodies are isolated in a matrix of finer-grained interchannel sediment suggesting deposition by anastomosed streams. A depositional model for our study area contains northwest-trending braided stream systems. Avulsions of these systems created anastomosed streams that flowed into adjacent interchannel areas. We propose that during late Paleocene a broad alluvial plain existed on the southeastern flank of the Powder River Basin. The braided streams that crossed this surface were tributaries to a northward-flowing, basin-axis trunk stream that existed to the west. ?? 1990.

Mesozoic lacustrine system in the Parnaíba Basin, northeastern Brazil: Paleogeographic implications for west Gondwana

NASA Astrophysics Data System (ADS)

Cardoso, Alexandre Ribeiro; Nogueira, Afonso César Rodrigues; Abrantes, Francisco Romério; Rabelo, Cleber Eduardo Neri

2017-03-01

The fragmentation of the West Gondwana during Early Triassic to Cretaceous was marked by intense climatic changes, concomitant with the establishment of extensive desertic/lacustrine systems. These deposits succeeded the emplacement and extrusion of lava flows, related to the pre-rift phase and initial opening of the Equatorial Atlantic Ocean. The thermal phase is recorded in the Upper Jurassic-Lower Cretaceous Pastos Bons Formation, exposed mainly in southeast parts of the Parnaíba Basin, Northeastern Brazil. The sedimentary facies of this unit were grouped in two facies associations (FA), representative of a shallow lacustrine system, influenced by episodic hyperpycnal and oscillatory flows. Central lake facies association (FA1) is composed by laminated mudstone (Ml), sandstone/mudstone rhythmite (S/Mr) and sandstone with even-parallel lamination (Sel). Flysch-like delta front (FA2) consists in sandstones with wave structures (Sw), sandstones with even-parallel stratification (Ses), massive sandstones (Sm), sandstones with soft-sediment deformation structures (Sd) and laminated mudstones (Ml). FA1 was deposited in the deepest portions of the lake, characterized by low energy, episodically disturbed by siliciclastic influx. FA2 presents sandy deposits generated by unconfined flow, probably fed by ephemeral stream flows that generated thickening upward of tabular sandstone beds. The progressive filling of the lake resulted in recurrent shoaling up of the water level and reworking by wave action. The installation of Pastos Bons lakes was controlled by thermal subsidence, mainly in restricted depocenters. The siliciclastic fluvial inflow can be related to the adjacent humid desertic facies, formed under climatic attenuation, typical of post-Triassic period, with reduced biological activity. Smectite and abundant feldspars, in lacustrine facies, corroborate an arid climate, with incipient chemical weathering. The new facies and stratigraphic data present in this paper provide an explanation about the implantation of a huge lacustrine system in the southern of Parnaiba Basin, with strong paleogeographic implications for the West-Central Gondwana during Late Jurassic to Early Cretaceous.

Facies-controlled fluid migration patterns and subsequent reservoir collapse by depressurization - the Entrada Sandstone, Utah

NASA Astrophysics Data System (ADS)

Sundal, A.; Skurtveit, E.; Midtkandal, I.; Hope, I.; Larsen, E.; Kristensen, R. S.; Braathen, A.

2016-12-01

The thick and laterally extensive Middle Jurassic Entrada Sandstone forms a regionally significant reservoir both in the subsurface and as outcrops in Utah. Individual layers of fluvial sandstone within otherwise fine-grained aeolian dunes and silty inter-dune deposits of the Entrada Earthy Member are of particular interest as CO2 reservoir analogs to study injectivity, reservoir-caprock interaction and bypass systems. Detailed mapping of facies and deformation structures, including petrographic studies and core plug tests, show significant rock property contrasts between layers of different sedimentary facies. Beds representing fluvial facies appear as white, medium-grained, well-sorted and cross-stratified sandstone, displaying high porosity, high micro-scale permeability, low tensile strength, and low seismic velocity. Subsequent to deposition, these beds were structurally deformed and contain a dense network of deformation bands, especially in proximity to faults and injectites. Over- and underlying low-permeability layers of inter-dune aeolian facies contain none or few deformation bands, display significantly higher rock strengths and high seismic velocities compared to the fluvial inter-beds. Permeable units between low-permeability layers are prone to become over-pressured during burial, and the establishment of fluid escape routes during regional tectonic events may have caused depressurization and selective collapse of weak layers. Through-cutting, vertical sand pipes display large clasts of stratified sandstone suspended in remobilized sand matrix, and may have served as permeable fluid conduits and pressure vents before becoming preferentially cemented and plugged. Bleached zones around faults and fractures throughout the succession indicate leakage and migration of reducing fluids. The fluvial beds are porous and would appear in wireline logs and seismic profiles as excellent reservoirs; whereas due to dense populations of deformation bands they may in fact display reduced horizontal and vertical permeability locally. Facies-related differences in geomechanical properties, pressure distribution and selective structural collapse have significant implications for injectivity and reservoir behavior.

Sedimentology of the lower Karoo Supergroup fluvial strata in the Tuli Basin, South Africa

NASA Astrophysics Data System (ADS)

Bordy, Emese M.; Catuneanu, Octavian

2002-11-01

The Karoo Supergroup in the Tuli Basin (South Africa) consists of a sedimentary sequence (˜450-500 m) composed of four stratigraphic units, namely the informal Basal, Middle and Upper Units, and the formal Clarens Formation. The units were deposited in continental settings from approximately Late Carboniferous to Middle Jurassic. This paper focuses on the ˜60-m-thick Basal Unit, which was examined in terms of sedimentary facies and palaeo-environments based on evidence provided by primary sedimentary structures, palaeo-flow measurements, palaeontological findings, borehole data (59 core descriptions) and stratigraphic relations. Three main facies associations have been identified: (i) gravelstone (breccias and conglomerate-breccias), (ii) sandstone and (iii) fine-grained sedimentary rocks. The coarser facies are interpreted as colluvial fan deposits, possibly associated with glaciogenic diamictites. The sandstone facies association is mainly attributed to channel fills of low sinuosity, braided fluvial systems. The coal-bearing finer-grained facies are interpreted as overbank and thaw-lake deposits, and represent the lower energy correlatives of the sandy channel fills. Sediment aggradation in this fluvio-lacustrine system took place under cold climatic conditions, with floating lake ice likely associated with lacustrine environments. Palaeo-current indicators suggest that the highly weathered, quartz-vein-rich metamorphic rock source of the Basal Unit was situated east-northeast of the study area. The accumulation of the Basal Unit took place within the back-bulge depozone of the Karoo foreland system. In addition to flexural subsidence, the amount of accommodation in this tectonic setting was also possibly modified by extensional tectonism in the later stages of the basin development. Based on sedimentological and biostratigraphic evidence, the coal-bearing fine-grained facies association displays strong similarities with the Vryheid Formation of the main Karoo Basin to the south. The lowermost non-fossiliferous breccias have been correlated before with the Dwyka Group in the main Karoo, and hence the Basal Unit may be regarded as the distal equivalent of the Dwyka and Ecca groups to the south.

Larger benthic foraminifera of the Paleogene Promina Beds (Croatia)

NASA Astrophysics Data System (ADS)

Cosovic, V.; Mrinjek, E.; Drobne, K.

2012-04-01

In order to add more information about complex origin of Promina Beds (traditionally interpreted as Paleogene molasse of Dinarides), two sections (Lišani Ostrovački and Ostrovica, Central Dalmatia, Croatia) have been studied in detail. Sampled carbonate sequences contain predominantly coralline red algae, larger benthic foraminifera and corals. Based on sedimentary textures, nummulitid (Nummulites s.str and Asterigerina sp.) test shapes and the associated skeletal components, altogether three types of the Middle Eocene (Lutetian to Bartonian) facies were recognized. The Ostrovica section is composed of alternating couples of marly limestones and marls, several decimeters thick with great lateral continuity. Two facies which vertically alternate are recognized as Nummulites - Asterigerina facies, where patchily dispersed large, robust and party reworked larger benthic foraminifera constitute 20% and small bioclasts (fomaniniferal fragments and whole tests less than 3 mm in diameters) 10% of rock volume and, Coral - Red algal facies with coral fragments of solitary and colonial taxa up to 1 cm in size constitute 5 - 40%, red algae 15 - 60% and lager benthic foraminifera up to 5% of rock volume. The textural and compositional differences among the facies suggest rhythmic exchanges of conditions that characterize shallower part of the mesophotic zone with abundant nummulithoclasts with deeper mesophotic, lime mud-dominated settings where nummulitids with the flat tests, coralline red algae and scleractinian corals are common. The scleractinian corals (comprising up to 20% of rock volume) encrusted by foraminifera (Acervulina, Haddonia and nubeculariids) or coralline red algae and foraminiferal assemblage made of orthophragminid and nummulitid tests scattered in matrix, are distributed uniformly throughout the studied Lišani Ostrovački section. In the central part of section, wavy to smooth thin (< 1 mm) crusts (laminas) alternating with encrusted corals occur. The characteristics of associated fauna and spatial relationship between corals and laminations indicate that this facies originated in a mid-ramp (shelf) setting.

The effect of paleotopography on lithic distribution and facies associations of small volume ignimbrites: the WTT Cupa (Roccamonfina volcano, Italy)

NASA Astrophysics Data System (ADS)

Giordano, Guido

1998-12-01

The distribution of lithic clasts within two trachytic, small volume, pumiceous ignimbrites are described from the Quaternary `White Trachytic Tuff Cupa' formation of Roccamonfina volcano, Italy. The ignimbrites show a downslope grading of lithics, with a maximum size where there is a major break in the volcano's slope, rather than at proximal locations. This is also the location where ignimbrites are thickest and most massive. The break in slope is interpreted to have reduced flow capacity and velocity, increasing the sedimentation rate, so that massive ignimbrite formed by hindered settling sedimentation. Ignimbrite Cc, exhibits no vertical grading of lithics, though it does show downslope grading with maximum size at the major break in slope and a rapid decrease further downslope. Ignimbrite Cc thins away from the break in slope, and shows an upward fining of the grain size within the topmost few decimeters of the unit. The ignimbrite is stratified proximally, and grades to massive facies at the break in slope, and distally to stratified facies with numerous inverse-graded beds. The simplest mechanism accounting for these downslope variations is progressive aggradation from a quasi-steady, nonuniform pyroclastic density current. The changes in deposit thickness and facies are interpreted to record downcurrent changes in sedimentation rate. The upward fining reflects waning flow. Inversely graded, bedded depositional facies in distal areas is interpreted to reflect flow unsteadiness and a decrease in suspended sediment load. Ignimbrite Cd shows vertical, as well as downslope grading of lithics. This characteristic, coupled with the widespread massive facies of the deposit and the tabular unit geometry are features that can be reconciled with both the debris flow/plug analogy for pyroclastic flows ( Sparks, 1976) and the progressive aggradation model ( Branney and Kokelaar, 1992). However, none of them appears to satisfy completely the field evidences, implying that when dealing with massive ignimbrites, other evidence than lithic grading needs to be presented to better understand the related transport and depositional processes.

Deposition of sedimentary organic matter in black shale facies indicated by the geochemistry and petrography of high-resolution samples, blake nose, western North Atlantic

USGS Publications Warehouse

Barker, C.E.; Pawlewicz, M.; Cobabe, E.A.

2001-01-01

A transect of three holes drilled across the Blake Nose, western North Atlantic Ocean, retrieved cores of black shale facies related to the Albian Oceanic Anoxic Events (OAE) lb and ld. Sedimentary organic matter (SOM) recovered from Ocean Drilling Program Hole 1049A from the eastern end of the transect showed that before black shale facies deposition organic matter preservation was a Type III-IV SOM. Petrography reveals that this SOM is composed mostly of degraded algal debris, amorphous SOM and a minor component of Type III-IV terrestrial SOM, mostly detroinertinite. When black shale facies deposition commenced, the geochemical character of the SOM changed from a relatively oxygen-rich Type III-IV to relatively hydrogen-rich Type II. Petrography, biomarker and organic carbon isotopic data indicate marine and terrestrial SOM sources that do not appear to change during the transition from light-grey calcareous ooze to the black shale facies. Black shale subfacies layers alternate from laminated to homogeneous. Some of the laminated and the poorly laminated to homogeneous layers are organic carbon and hydrogen rich as well, suggesting that at least two SOM depositional processes are influencing the black shale facies. The laminated beds reflect deposition in a low sedimentation rate (6m Ma-1) environment with SOM derived mostly from gravity settling from the overlying water into sometimes dysoxic bottom water. The source of this high hydrogen content SOM is problematic because before black shale deposition, the marine SOM supplied to the site is geochemically a Type III-IV. A clue to the source of the H-rich SOM may be the interlayering of relatively homogeneous ooze layers that have a widely variable SOM content and quality. These relatively thick, sometimes subtly graded, sediment layers are thought to be deposited from a Type II SOM-enriched sediment suspension generated by turbidities or direct turbidite deposition.

Internal morphology, habit and U-Th-Pb microanalysis of amphibolite-to-granulite facies zircons: geochronology of the Ivrea Zone (Southern Alps)

NASA Astrophysics Data System (ADS)

Vavra, Gerhard; Schmid, Rolf; Gebauer, Dieter

Several types of growth morphologies and alteration mechanisms of zircon crystals in the high-grade metamorphic Ivrea Zone (IZ) are distinguished and attributed to magmatic, metamorphic and fluid-related events. Anatexis of pelitic metasediments in the IZ produced prograde zircon overgrowths on detrital cores in the restites and new crystallization of magmatic zircons in the associated leucosomes. The primary morphology and Th-U chemistry of the zircon overgrowth in the restites show a systematic variation apparently corresponding to the metamorphic grade: prismatic (prism-blocked) low-Th/U types in the upper amphibolite facies, stubby (fir-tree zoned) medium-Th/U types in the transitional facies and isometric (roundly zoned) high-Th/U types in the granulite facies. The primary crystallization ages of prograde zircons in the restites and magmatic zircons in the leucosomes cannot be resolved from each other, indicating that anatexis in large parts of the IZ was a single and short lived event at 299+/-5Ma (95% c. l.). Identical U/Pb ages of magmatic zircons from a metagabbro (293+/-6Ma) and a metaperidotite (300+/-6Ma) from the Mafic Formation confirm the genetic context of magmatic underplating and granulite facies anatexis in the IZ. The U-Pb age of 299+/-5Ma from prograde zircon overgrowths in the metasediments also shows that high-grade metamorphic (anatectic) conditions in the IZ did not start earlier than 20Ma after the Variscan amphibolite facies metamorphism in the adjacent Strona-Ceneri Zone (SCZ). This makes it clear that the SCZ cannot represent the middle to upper crustal continuation of the IZ. Most parts of zircon crystals that have grown during the granulite facies metamorphism became affected by alteration and Pb-loss. Two types of alteration and Pb-loss mechanisms can be distinguished by cathodoluminescence imaging: zoning-controlled alteration (ZCA) and surface-controlled alteration (SCA). The ZCA is attributed to thermal and/or decompression pulses during extensional unroofing in the Permian, at or earlier than 249+/-7Ma. The SCA is attributed to the ingression of fluids at 210+/-12Ma, related to hydrothermal activity during the breakup of the Pangaea supercontinent in the Upper Triassic/Lower Jurassic.

Petrologic and chemical changes in ductile shear zones as a function of depth in the continental crust

NASA Astrophysics Data System (ADS)

Yang, Xin-Yue

Petrologic and geochemical changes in ductile shear zones are important for understanding deformational and geochemical processes of the continental crust. This study examines three shear zones that formed under conditions varying from lower greenschist facies to upper amphibolite facies in order to document the petrologic and geochemical changes of deformed rocks at various metamorphic grades. The studied shear zones include two greenschist facies shear zones in the southern Appalachians and an upper amphibolite facies shear zone in southern Ontario. The mylonitic gneisses and mylonites in the Roses Mill shear zone of central Virginia are derived from a ferrodiorite protolith and characterized by a lower greenschist facies mineral assemblage. Both pressure solution and recrystallization were operative deformation mechanisms during mylonitization in this shear zone. Strain-driven dissolution and solution transfer played an important role in the mobilization of felsic components (Si, Al, K, Na, and Ca). During mylonitization, 17% to 32% bulk rock volume losses of mylonites are mainly attributed to removal of these mobile felsic components by a fluid phase. Mafic components (Fe, Mg, Ti, Mn and P) and trace elements, REE, Y, V and Sc, were immobile. At Rosman, North Carolina, the Brevard shear zone (BSZ) shows a deformational transition from the coarse-grained Henderson augen gneiss (HAG) to proto-mylonite, mylonite and ultra-mylonite. The mylonites contain a retrograde mineral assemblage as a product of fluid-assisted chemical breakdown of K-feldspar and biotite at higher greenschist facies conditions. Recrystallization and intra-crystalline plastic deformation are major deformation mechanisms in the BSZ. Fluid-assisted mylonitization in the BSZ led to 6% to 23% bulk volume losses in mylonites. During mylonitization, both major felsic and mafic elements and trace elements, Rb, Sr, Zr, V, Sc, and LREE were mobile; however, the HREEs were likely immobile. A shear zone in the Parry Sound domain, Ontario, formed at upper amphibolite facies conditions. The deformation process of the shear zone involves fully plastic deformation and high-temperature dynamic recrystallization and annealing recovery of both quartz and plagioclase. Geochemical evidence indicates that the chemical changes in the deformed rocks resulted from mixing of mafic and felsic layers together with fluid-assisted mass transfer within the shear zone. A geochemical model that incorporates closed-system two-component mixing with open-system mass transfer can well explain the observed major and trace element data.

Mineral textural evolution and PT-path of relict eclogite-facies rocks in the Paleoproterozoic Nagssugtoqidian Orogen, South-East Greenland

NASA Astrophysics Data System (ADS)

Müller, Sascha; Dziggel, Annika; Kolb, Jochen; Sindern, Sven

2018-01-01

The Nagssugtoqidian Orogen in South-East Greenland is a deeply eroded, Paleoproterozoic collision orogen. It consists of a variety of Archean and Paleoproterozoic rocks, most notably TTG gneiss, a variety of supracrustal rocks and basic dykes. This study aims at providing new insight into the geodynamic processes and subduction depth of this orogen by investigating the metamorphic evolution of garnet pyroxenite, retrogressed eclogite and amphibolite-facies rocks that are exposed within the Kuummiut Terrane of the Nagssugtoqidian Orogen. The garnet-pyroxenite has a dominant mineral assemblage of garnet, orthopyroxene, clinopyroxene and hornblende, while garnet-amphibolite and garnet-kyanite schist are made up of garnet, hornblende, plagioclase and quartz, and garnet, kyanite, biotite and quartz, respectively. Relicts of, and pseudomorphs after, eclogite-facies mineral assemblages are frequently found within basic metavolcanic rocks and Paleoproterozoic discordant basic dykes. In the retrogressed eclogite, the retrograde mineral reactions ceased prior to completion, resulting in the formation of two domains. A clinopyroxene domain consists of diopside-plagioclase symplectites, which are interpreted to have grown at the expense of omphacite. The symplectites are surrounded and partly replaced by hornblende and plagioclase. Omphacite (XJd 25-42) is preserved in a Na-rich sample, where it occurs in the core of large clinopyroxene and as inclusion in garnet and hornblende. In a garnet domain, garnet is variably replaced by an inner corona of plagioclase and an outer corona of amphibole +/- orthopyroxene and clinopyroxene. The degree of retrogression as well as the type of the retrograde assemblage in both domains appears to be dependent on fluid activity. Large garnet grains preserve Ca-rich cores, interpreted as prograde in origin, while Mg-rich garnet rims formed during eclogite-facies metamorphism and later re-equilibration. Pseudosection modelling combined with conventional geothermobarometry reveals a clockwise PT-evolution, involving eclogite-facies conditions of 17-19 kbar and 740-810 °C, followed by near-isothermal decompression to medium-pressure granulite-facies conditions (13.8-15.4 kbar, 760-880 °C) and subsequent decompression with minor cooling to high-pressure amphibolite-facies grades (8.8-10.9 kbar, 660-840 °C). These data show that rocks of the Kuummiut Terrane were exhumed from 70 to about 30 km into the mid- and lower crust. The PT-path implies that exhumation initially was rapid and tectonically-controlled.

Trace-element record in zircons during exhumation from UHP conditions, North-East Greenland Caledonides

USGS Publications Warehouse

McClelland, W.C.; Gilotti, J.A.; Mazdab, F.K.; Wooden, J.L.

2009-01-01

Coesite-bearing zircon formed at ultrahigh-pressure (UHP) conditions share general characteristics of eclogite-facies zircon with trace-element signatures characterized by depleted heavy rare earth elements (HREE), lack of an Eu anomaly, and low Th/ U ratios. Trace-element signatures of zircons from the Caledonian UHP terrane in North-East Greenland were used to examine the possible changes in signature with age during exhumation. Collection and interpretation of age and trace-element analyses of zircon from three samples of quartzofeldspathic gneiss and two leucocratic intrusions were guided by core vs. rim zoning patterns as imaged by cathodoluminesence. Change from igneous to eclogite-facies metamorphic trace-element signature in protolith zircon is characterized by gradual depletion of HREE, whereas newly formed metamorphic rims have flat HREE patterns and REE concentrations that are distinct from the recrystallized inherited cores. The signature associated with eclogite-facies metamorphic zircon is observed in coesite-bearing zircon formed at 358 ?? 4 Ma, metamorphic rims formed at 348 ?? 5 Ma during the initial stages of exhumation, and metamorphic rims formed at 337 ?? 5 Ma. Zircons from a garnet-bearing granite emplaced in the neck of an eclogite boudin and a leucocratic dike that cross-cuts amphibolite-facies structural fabrics have steeply sloping HREE patterns, variably developed negative Eu anomalies, and low Th/U ratios. The granite records initial decompression melting and exhumation at 347 ?? 2 Ma and later zircon rim growth at 329 ?? 5. The leucocratic dike was likely emplaced at amphibolite-facies conditions at 330 ?? 2 Ma, but records additional growth of compositionally similar zircon at 321 ??2 Ma. The difference between the trace-element signature of metamorphic zircon in the gneisses and in part coeval leucocratic intrusions indicates that the zircon signature varies as a function of lithology and context, thus enhancing its ability to aid in the interpretation of U-Pb data and track the exhumation history of UHP terranes. The differences may reflect variation in elemental availability through breakdown reactions in quartzofeldpathic gneiss vs. availability during melt production and/or crystallization. UHP rocks in North-East Greenland began exhumation by 347 ?? 2 Ma, were still at HP eclogite-facies conditions at 337 ?? 5 Ma and were at amphibolite-facies conditions by 330 ?? 2 Ma. ?? 2009 E. Schweizerbart'sche Verlagsbuchhandlung.

Patterns of megafloral change across the Cretaceous-Tertiary boundary in the Northern Great Plains and Rocky Mountains

NASA Technical Reports Server (NTRS)

Johnson, Kirk R.; Hickey, Leo J.

1988-01-01

The spatial and temporal distribution of vegetation in the terminal Cretaceous of Western Interior North America was a complex mosaic resulting from the interaction of factors including a shifting coastline, tectonic activity, a mild, possibly deteriorating climate, dinosaur herbivory, local facies effects, and a hypothesized bolide impact. In order to achieve sufficient resolution to analyze this vegetational pattern, over 100 megafloral collecting sites were established, yielding approximately 15,000 specimens, in Upper Cretaceous and lower Paleocene strata in the Williston, Powder River, and Bighorn basins in North Dakota, Montana, and Wyoming. These localities were integrated into a lithostratigraphic framework that is based on detailed local reference sections and constrained by vertebrate and palynomorph biostratigraphy, magnetostratigraphy, and sedimentary facies analysis. A regional biostratigraphy based on well located and identified plant megafossils that can be used to address patterns of floral evolution, ecology, and extinction is the goal of this research. Results of the analyses are discussed.

Biotic association and palaeoenvironmental reconstruction of the "Loma del Pterodaustro" fossil site (Early Cretaceous, Argentina)

USGS Publications Warehouse

Chiappe, L.; Rivarola, D.; Cione, A.; Fregenal-Martinez, M.; Sozzi, H.; Buatois, L.; Gallego, O.; Laza, J.; Romero, E.; Lopez-Arbarello, A.; Buscalioni, A.; Marsicano, C.; Adamonis, S.; Ortega, F.; McGehee, S.; Di, Iorio O.

1998-01-01

A sedimentological analysis of the basal section of the Early Cretaceous, lacustrine Lagarcito Formation at "Loma del Pterodaustro" (San Luis, Argentina) and a summary of its biological components are presented. Three sedimentological facies can be recognized in the basal sequence of the Lagarcito Formation. Fossil remains are particularly abundant in laminated claystones of a facies interpreted as deposits formed in offshore areas of the lake. The preservation of delicate structures allows recognition of these deposits as a Konservat Lagersta??tte. Up to now, rocks at "Loma del Pterodaustro" have yielded plants, conchostracans, semionotid and pleuropholid fishes, pterodactyloid pterosaurs, and a variety of invertebrate traces. The chronology of the Lagarcito Formation is discussed and it is concluded that this unit is of Albian age. The palaeoenvironment of deposition of the basal sequence of the Lagarcito Formation at "Loma del Pterodaustro" is interpreted as a perennial, shallow lake developed within an alluvial plain, under semiarid climatic conditions.

Major magmatic events in Mt Meredith, Prince Charles Mountains: First evidence for early Palaeozoic syntectonic granites

USGS Publications Warehouse

Gongurov, N.A.; Laiba, A.A.; Beliatsky, B.V.

2007-01-01

Precambrian rocks at Mt Meredith underwent granulite-facies metamorphism M1. Zircon isotope dating for two orthogneisses revealed the following age signatures: 1294±3 and 957±4Ma; 1105±5 and 887±2Ma. The oldest ages could reflect the time of orthogneiss protolith crystallization and the latest age determinations date Grenvillian metamorphism. The metamorphic rocks were intruded by two-mica and garnet-biotite granites. The granites and host rocks underwent amphibolite-facies metamorphism M2. Zircon isotope analysis of the two-mica granites showed age estimation within 550-510Ma and zircon dating of the garnet-biotite granites revealed the ages of 1107±5, 953±8, and 551±4Ma. As Pan-African age signatures were obtained from only the granite samples, it is possible to suggest that the granites were formed at the time of 510-550Ma and the zircons with greater age values were captured by granites from the host rocks.

An Appalachian Amazon? Magnetofossil evidence for the development of a tropical river-like system in the mid-Atlantic United States during the Paleocene-Eocene Thermal Maximum

NASA Astrophysics Data System (ADS)

Kopp, R. E.; Schumann, D.; Raub, T. D.; Powars, D. S.; Godfrey, L. V.; Swanson-Hysell, N.; Maloof, A. C.; Vali, H.

2009-12-01

The Paleocene-Eocene Thermal Maximum is preserved within the mid-Atlantic Coastal Plain as a unique clay deposited in the Salisbury Embayment, a tectonic downwarp that stretches from southeastern Virginia to central New Jersey. The mostly massive and kaolinite-rich clay is distinct from the glauconitic sediments that otherwise characterize regional Paleocene and lower Eocene deposits. It contains abundant magnetite produced by magnetotactic bacteria and by larger, presumptively eukaryotic microorganisms not yet known from any other locality. Because most magnetotactic bacteria live within a specific, narrow redox environment -- the suboxic zone of a water column or sediments, where both oxygen and sulfide concentrations are low and iron concentrations relatively high -- their biominerals can be used as a paleoenvironmental tracer. High iron bioavailability indicates a relatively thick suboxic zone. The preservation of iron biominerals suggests that this zone was located in sediments, rather than in the water column, as water column suboxia is associated with high sedimentary organic carbon concentrations, which promote magnetite dissolution. The thickest modern, sedimentary, high-iron suboxic zones occur in tropical river-dominated shelves, such as the Amazon Shelf. These zones result from the combination of a moderately high input of reactive Fe (produced by tropical weathering conditions) with a high-energy environment (produced by tides, frontal-zone currents, and surface waves) that promotes the regular physical reworking of the sediments, thus allowing the re-oxidation of reduced Fe and increasing the availability of Fe as an electron acceptor. To test the "Appalachian Amazon" hypothesis, we mapped the distribution of magnetofossils throughout the Salisbury Embayment using ferromagnetic resonance spectroscopy and electron microscopy, supplemented by organic carbon isotope data. We find three magnetic facies in the clay: Facies 1, characterized by a mix of detrital particles and magnetofossils; Facies 2, with a higher magnetofossil-to-detrital ratio; and Facies 3, with only transient magnetofossils. Facies 1 occurs in inner-middle neritic deposits of central Maryland and northern Virginia, near where the modern Potomac crosses the Fall Line. Facies 2 occurs throughout the middle neritic deposits of eastern Maryland and Virginia and of southern New Jersey. Facies 3 occurs in the outer neritic deposits of eastern New Jersey and on the northern and southern flanks of the embayment. Consistent with the hypothesis, this distribution suggests a link between the magnetofossil distribution and a river system with an outlet in the vicinity of Facies 1. The development of such a river system may have been linked to a combination of more intense weathering, higher precipitation, and increased storminess.

Zircon and monazite petrochronologic record of prolonged amphibolite to granulite facies metamorphism in the Ivrea-Verbano and Strona-Ceneri Zones, NW Italy

NASA Astrophysics Data System (ADS)

Guergouz, Celia; Martin, Laure; Vanderhaeghe, Olivier; Thébaud, Nicolas; Fiorentini, Marco

2018-05-01

In order to improve the understanding of thermal-tectonic evolution of high-grade terranes, we conducted a systematic study of textures, REE content and U-Pb ages of zircon and monazite grains extracted from migmatitic metapelites across the amphibolite to granulite facies metamorphic gradient exposed in the Ivrea-Verbano and Strona-Ceneri Zones (Italy). This study documents the behaviour of these accessory minerals in the presence of melt. The absence of relict monazite grains in the metasediments and the gradual decrease in the size of inherited zircon grains from amphibolite to granulite facies cores indicate partial to total dissolution of accessory minerals during the prograde path and partial melting. The retrograde path is marked by (i) growth of new zircon rims (R1 and R2) around inherited cores in the mesosome, (ii) crystallisation of stubby zircon grains in the leucosome, especially at granulite facies, and (iii) crystallisation of new monazite in the mesosome. Stubby zircon grains have a distinctive fir-tree zoning and a constant Th/U ratio of 0.20. Together, these features reflect growth in the melt; conversely, the new zircon grains with R1 rims have dark prismatic habits and Th/U ratios < 0.1, pointing to growth in solid residues. U-Pb ages obtained on both types are similar, indicating contemporaneous growth of stubby zircon and rims around unresorbed zircon grains, reflecting the heterogeneous distribution of the melt at the grain scale. In the Ivrea-Verbano Zone the interquartile range (IQR) of U-Pb ages on zircon and monazite are interpreted to represent the length of zircon and monazite crystallisation in the presence of melt. Accordingly, they provide an indication on the minimum duration for high-temperature metamorphism and partial melting of the lower crust: 20 Ma and 30 Ma in amphibolite and granulite facies, respectively. In amphibolite facies, zircon crystallisation between 310 and 294 Ma (IQR) is interpreted to reflect metamorphic peak condition and earlier retrograde history; conversely, monazite crystallisation between 297 and 271 Ma (IQR) reflects cooling under 750 °C to a temperature close to the solidus. In granulite facies, zircon crystallisation between 295 and 265 Ma (IQR) is interpreted to reflect high-temperature conditions, which were attained after peak of metamorphism during isothermal decompression and subsequent cooling under 850-950 °C. The observed decrease of U-Pb ages in metamorphic zircon and monazite from amphibolite to granulite facies (i.e. from the middle to the lower crust) is interpreted to record slow cooling and crystallisation of the Variscan orogenic root at the transition from orogenic collapse to opening of the Tethys Ocean.

Tectono-metamorphic evolution of meta-ophiolitic units along Susa Valley (Italian Western Alps): new suggestions for the exhumation processes

NASA Astrophysics Data System (ADS)

Ghignone, Stefano; Borghi, Alessandro; Balestro, Gianni; Gattiglio, Marco

2017-04-01

In the inner Western Alps, meta-ophiolite units (i.e., the Piemonte Zone) show different stages of the tectono-metamorphic evolution, since the early phases of subduction to the latest exhumation steps. Tectono-metamorphic data collected through the meta-ophiolite units of the Piemonte Zone along the middle Susa Valley allowed to infer new ideas about the exhumation processes that developed in the (U)HP units. In this area, Zermatt-Saas-like meta-ophiolite unit (i.e., the eclogite-facies Internal Piemonte Zone, IPZ) are tectonically overlain by Combin-like ones (i.e., the blueschist-facies External Piemonte Zone, EPZ), through a thick shear zone (i.e., the Susa Shear Zone, SSZ). Metamorphic history was achieved by analyzing basic rocks (metabasalt and Fe-Ti metagabbro) and sedimentary rocks derived from reworking basic rocks in oceanic environment (basic sandstones and conglomerates, and ophiolitic breccia). Different P-T paths were inferred for IPZ and EPZ, according with mineral assemblages and realizations of pseudosections. In the IPZ, four tectono-metamorphic events, developed under variables metamorphic conditions, were recognized. The first (peak-P) event shows (U)HP conditions, defined by the occurrence of relic mineral assemblage (Grt I+ Omp I + Rt). The paragenesis is completed by Zo + Pg pseudomorphs, implying that Lws-eclogite facies were reached. The discovery in Grt (and Rt) relics inclusions of black euhedral pseudomorphs of disordered graphite, suggesting to be derived from original microdiamonds, agree with other petrologic constrains. The second event, marked by the Grt II + Omp II + Ph + Gln + Zo assemblage, developed under epidote-eclogite facies conditions. Following a retrograde and decompressional trajectory, the IPZ was then re-equilibrated under greenschist-facies conditions and a new assemblage (Ab + Chl + Mu + Czo + Ttn + Act) overprinted HP paragenesis. The last event is marked by a weak heating, with crystallization of Bt + Ep + Olig + Hbl (Prg) + Ms. The EPZ shows a different metamorphic evolution, where only two events were recognized. The first event developed under blueschist-facies conditions, with relics of mineral assemblages consisting of Gln + Rt + Ph. Then, a retrograde trajectory re-equilibrated EPZ under greenschist-facies conditions and a new stable mineral assemblage (Ab + Chl + Mu + Ttn + Act + Czo) grew. The inferred P-T path suggests, for the IPZ, a first isothermal exhumation stage, likely driven by buoyancy forces from the base of the orogenic wedge. In the EPZ, HP peak occurs at the same gradient of the second event in the IPZ, suggesting that, during exhumation of the IPZ, the EPZ was still subducted. The strong re-equilibration under greenschist-facies conditions suggests a stage of slow exhumation rate, which can be related to the coupling between IPZ and EPZ.

Hydrothermal alteration and mass exchange in the hornblende latite porphyry, Rico, Colorado

USGS Publications Warehouse

Larson, P.B.; Cunningham, C.G.; Naeser, C.W.

1994-01-01

The Rico paleothermal anomaly, southwestern Colorado, records the effects of a large hydrothermal system that was active at 4 Ma. This hydrothermal system produced the deep Silver Creek stockwork Mo deposit, which formed above the anomaly's heat source, and shallower base and precious-metal vein and replacement deposits. A 65 Ma hornblende latite porphyry is present as widespread sills throughout the area and provided a homogenous material that recorded the effects of the hydrothermal system up to 8 km from the center. Hydrothermal alteration in the latite can be divided into a proximal facies which consists of two assemblages, quartz-illite-calcite and chlorite-epidote, and a distal facies which consists of a distinct propylitic assemblage. Temperatures were gradational vertically and laterally in the anomaly, and decreased away from the centra heat source. A convective hydrothermal plume, 3 km wide and at least 2 km high, was present above the stock-work molybdenum deposit and consisted of upwelling, high-temperature fluids that produced the proximal alteration facies. Distal facies alteration was produced by shallower cooler fluids. The most important shallow base and precious-metal vein deposits in the Rico district are at or close to the boundary of the thermal plume. Latite within the plume had a large loss of Na2O, large addition of CaO, and variable SiO2 exchante. Distal propylitized latite samples lost small amounts of Na2O and CaO and exchanged minor variable amounts of SiO2. The edge of the plume is marked by steep Na2O exchange gradients. Na2O exchange throughout the paleothermal anomaly was controlled by the reaction of the albite components in primary plagioclase and alkali feldspars. Initial feldspar alteration in the distal facies was dominated by reaction of the plagioclase, and the initial molar ratio of reactants (alkali feldspar albite component to plagioclase albite component) was 0.35. This ratio of the moles of plagioclase to alkali feldspar albite components that reacted evolved to 0.92 as the reaction progressed. Much of the alkali feldspar albite component in the proximal facies reacted while the, primary plagioclase was still unreacted, but the ratio for these assemblages increased to 1.51 when the plagioclase entered the reaction paragenesis. Plagioclase reaction during distal propylitic alteration resulted in pseudomorphic albite mixed with illite and a loss of Na2O. CaO is lost in the distal facies as hornblende reacts to chlorite, although some calcium may be fixed in calcite. CaO is added to the proximal facies as the quantity of chlorite replacing hornblende increases and epidote and calcite are produced. ?? 1994 Springer-Verlag.

Depositional framework and sequence stratigraphic aspects of the Coniacian Santonian mixed siliciclastic/carbonate Matulla sediments in Nezzazat and Ekma blocks, Gulf of Suez, Egypt

NASA Astrophysics Data System (ADS)

El-Azabi, M. H.; El-Araby, A.

2007-04-01

Superb outcrops of mixed siliciclastic/carbonate rocks mark the Coniacian-Santonian Matulla Formation exposed in Nezzazat and Ekma blocks, west central Sinai. They are built up of various lithofacies that reflect minor fluctuations in relative sea-level from lower intertidal to slightly deep subtidal settings. Relying on the facies characteristics and stratal geometries, the siliciclastic rocks are divided into seven depositional facies, including beach foreshore laminated sands, upper shoreface cross-bedded sandstone, lower shoreface massive bioturbated and wave-rippled sandstones, shallow subtidal siltstone and deep subtidal shale/claystone. The carbonate rocks comprise lower intertidal lime-mudstone, floatstone and dolostone, shallow subtidal skeletal shoal of oyster rudstone/bioclastic grainstone, and shoal margin packstone. Oolitic grain-ironstone and ferribands are partially intervened the facies types. Deposition has taken place under varied conditions of restricted, partly open marine circulation, low to high wave energy and normal to raised salinity during alternating periods of abundant and ceased clastic supply. The facies types are arranged into asymmetric upward-shallowing cycles that record multiple small-scale transgressive-regressive events. Lime-mudstone and sandstone normally terminate the regressive events. Four sequence boundaries marking regional relative sea-level falls divide the Matulla Formation into three stratigraphic units. These boundaries are Turonian/Coniacian, intra-Coniacian, Coniacian/Santonian and Santonian/Campanian. They do not fit with those sequence boundaries proposed in Haq et al.'s global eustatic curves (1988) except for the sea-level fall associated with the intra-Coniacian boundary. Other sequence boundaries have resulted from regional tectonic impact of the Syrian Arc Fold System that has been initiated in north Egypt during the Latest Turonian-Coniacian. These boundaries enclose three well-defined 3rd order depositional sequences; their enclosing shallowing-upward cycles (i.e. parasequences) record the 4th order relative sea-level fluctuations. 34 and 20 parasequence sets, in the order of a few meters to tens of meters thick, mark the Matulla sequences in Nezzazat and Ekma blocks respectively. Each sequence shows an initial phase of rapid sea-level rise with retrogradational sets, followed by lowering sea-level and progradation/aggradation of the parasequence sets. The transgressive deposits display predominance of deep subtidal lagoonal facies, while highstand deposits show an increase in siliciclastic and carbonate facies with the progressive decrease of lagoonal facies. The sedimentary patterns and environments suggest that the regional, partly eustatic sea-level (i.e. intra-Coniacian) changes controlled the overall architecture of the sequence distribution, whereas changes in the clastic input controlled the variations in facies associations within each depositional sequence.

Identification of channel geometries applying seismic attributes and spectral decomposition techniques, Temsah Field, Offshore East Nile Delta, Egypt

NASA Astrophysics Data System (ADS)

Othman, Adel A. A.; Fathy, M.; Negm, Adel

2018-06-01

The Temsah field is located in eastern part of the Nile delta to seaward. The main reservoirs of the area are Middle Pliocene mainly consist from siliciclastic which associated with a close deep marine environment. The Distribution pattern of the reservoir facies is limited scale indicating fast lateral and vertical changes which are not easy to resolve by applying of conventional seismic attribute. The target of the present study is to create geophysical workflows to a better image of the channel sand distribution in the study area. We apply both Average Absolute Amplitude and Energy attribute which are indicated on the distribution of the sand bodies in the study area but filled to fully described the channel geometry. So another tool, which offers more detailed geometry description is needed. The spectral decomposition analysis method is an alternative technique focused on processing Discrete Fourier Transform which can provide better results. Spectral decomposition have been done over the upper channel shows that the frequency in the eastern part of the channel is the same frequency in places where the wells are drilled, which confirm the connection of both the eastern and western parts of the upper channel. Results suggest that application of the spectral decomposition method leads to reliable inferences. Hence, using the spectral decomposition method alone or along with other attributes has a positive impact on reserves growth and increased production where the reserve in the study area increases to 75bcf.

Water quality assessment and hydrochemical characterization of Zamzam groundwater, Saudi Arabia

NASA Astrophysics Data System (ADS)

Al-Barakah, Fahad N.; Al-jassas, Abdurahman M.; Aly, Anwar A.

2017-11-01

This study focuses on chemical and microbial analyses of 50 Zamzam water samples, Saudi Arabia. The soluble ions, trace elements, total colony counts, total coliform group, and E. coli were determined and compared with WHO standards. The obtained results indicated that the dissolved salts, soluble cations and anions, Pb, Cd, As, Zn, Cu, Ni, Co, Fe, Mn, Cr, PO4 3-, NO2 -, Br-, F-, NH4 +, and Li+, were within permissible limits for all samples. Yet, 2% of waters contain NO3 - at slightly high concentration. The water quality index (WQI) reveals that 94% of the samples were excellent for drinking (class I). While the remaining was unsuitable due to total coliform group contamination "class (V)". Durov diagram suggest no clear facies and dominant water type can be noted. It indicates mixing processes of two or more different facies might be occurring in the groundwater system. All studied waters were undersaturated with respect to halite, gypsum, fluorite, and anhydrite. These minerals tend to dissolve and increase water salinity. A direct relationship between Zamzam water salinity and rainfall is recorded. The water salinity fluctuated between 4500 mg L-1 (year 1950) and 500 mg L-1 (year 2015) based on rainfall extent. The approach applied can be used to similar groundwater worldwide.

Holocene coastal regression and facies patterns in a subtropical arid carbonate environment - The sabkha of Al-Zareq, Qatar

NASA Astrophysics Data System (ADS)

Engel, Max; Peis, Kim T.; Strohmenger, Christian J.; Pint, Anna; Rivers, John M.; Brückner, Helmut

2017-04-01

The Arabian Gulf is a semi-enclosed, shallow sea, which became flooded some 12,500 years ago. Current relative sea level was first reached c. 7000 to 6500 years ago, while a relative sea-level highstand of c. 2-4 m dates to around 6000-4500 years ago. Supratidal coastal sabkhas (former lagoons), stranded beach ridges and foredune sequences as well as abandoned tidal channels along the coasts of Qatar and the UAE witness this mid-Holocene peak in sea level. Regression since then triggered shoreline migration of up to several kilometers along the low-lying coasts of Qatar, for which, however, detailed reconstructions in space and time are scarce. This study presents facies changes and a scenario for the spatio-temporal evolution of the coastal area of Al Zareq in the inner Gulf of Salwa (SW Qatar), thereby also contributing to a better understanding of reservoirs that formed under arid climatic conditions. Ten vibracores (up to 8 m), two deep drillings (up to 20.5 m) and two trenches covering the entire transgression-regression cycle were investigated. In order to characterize and interpret facies types at Al-Zareq as well as to reconstruct sabkha formation in space and time, grain size and shape distribution (laser diffraction, camsizer), XRD, micro- and macrofossil contents and thin sections were analysed by applying qualitative interpretation, descriptive and multivariate statistics (PCA, MDA, end-member modelling), and RIR (XRD). Thirty-seven samples were radiocarbon dated and four samples were dated by optically stimulated luminescence (OSL). Depositional environments include the following types: eolian dune and interdune (in-situ or reworked), coastal sabkha (diagenetic), saline lake (salina), protected lagoon (sand- or carbonate-dominated), beach and beach spit, tidal channel and tidal bar, as well as open lagoon (low-energy, shallow-subtidal lagoon and low-energy deeper-subtidal).

Publications - PIR 2008-1B | Alaska Division of Geological & Geophysical

Science.gov Websites

., Preliminary results of recent geologic field investigations in the Brooks Range Foothills and North Slope Surveys Skip to content State of Alaska myAlaska My Government Resident Business in Alaska content DGGS PIR 2008-1B Publication Details Title: Measured section and facies analysis of the Lower

Publications - PIR 2015-5-4 | Alaska Division of Geological & Geophysical

Science.gov Websites

facies analysis of the Lower Jurassic Talkeetna Formation, north Chinitna Bay, Alaska, in Wartes, M.A of the Lower Jurassic Talkeetna Formation, north Chinitna Bay, Alaska Authors: Bull, K.F. Publication Surveys Skip to content State of Alaska myAlaska My Government Resident Business in Alaska

Sedimentological characterization of flood-tidal delta deposits in the Sego Sandstone, subsidence analysis in the Piceance Creek Basin, and uranium-lead geochronology (NW Colorado, USA)

NASA Astrophysics Data System (ADS)

York, Carly C.

The Sego Sandstone located in western Colorado is a member of the Upper Cretaceous Mesaverde Group and is considered an analogue of the Canadian heavy oil sands. Deposition of the Sego Sandstone occurred during the Upper Campanian (~78 Ma) at the end of the Sevier Orogeny and the beginning of the Laramide Orogeny on the western edge of the Cretaceous Interior Seaway. Although regional studies have detailed time equivalent deposits in the Book Cliffs, UT, the tidally influenced and marginal marine lithofacies observed north of Rangely, CO are distinctly different from the dominately fluvial and tidally-influenced delta facies of Book Cliff outcrops to the southwest. This study characterized flood-tidal delta deposits within the Sego Sandstone, the subsidence history of the Upper Cretaceous sedimentary rocks within the present day Piceance Creek Basin in NW Colorado, and the detrital zircon signal and oldest depositional age of the Sego Sandstone. The goals of this study are to (i) identify relative controls on reservoir characteristics of marginal marine deposits, specifically in flood-tidal delta deposits; (ii) identify the possible mechanisms responsible for subsidence within the present day Piceance Creek Basin during the Late Cretaceous; and (iii) better constrain the provenance and maximum depositional age of the Sego Sandstone. In this study I compared grain size diameter, grain and cement composition, and the ratio of pore space/cement from thin sections collected in tidal, shoreface, and flood-tidal delta facies recognized along detailed measured stratigraphic sections. This analysis provides a detailed comparison between different depositional environments and resultant data showed that grain size diameter is different between tidal, shoreface, and flood-tidal delta facies. Identifying the subsidence mechanisms affecting the Piceance Creek Basin and sediment source of the Late Cretaceous sediments, on the other hand, is important for evaluation of controls on basin filling. Additionally, U-Pb analysis better constrains youngest depositional age for the Sego Sandstone in northwestern Colorado to 76 Ma years old, where previously constraints have been based on stratigraphic relationships and biostratigraphy in eastern Utah and southeastern Colorado.

Constraints from Mesozoic siliciclastic cover rocks and satellite image analysis on the slip history of regional E-W faults in the southeast Western Desert, Egypt

NASA Astrophysics Data System (ADS)

Tewksbury, Barbara J.; Mehrtens, Charlotte J.; Gohlke, Steven A.; Tarabees, Elhamy A.; Hogan, John P.

2017-12-01

In the southeast Western Desert of Egypt, a prominent set of E-W faults and co-located domes and basins involve sedimentary cover rock as young as the early Eocene. Although earlier Mesozoic slip on faults in southern Egypt has been widely mentioned in the literature and attributed to repeated reactivation of basement faults, evidence is indirect and based on the idea that regional stresses associated with tectonic events in the Syrian Arc would likely have reactivated basement faults in south Egypt in dextral strike slip during the Mesozoic as well as the Cenozoic. Here, we present direct evidence from the rock record for the sequence of development of features along these faults. Southwest of Aswan, a small structural dome in Mesozoic Nubia facies rocks occurs where the Seiyal Fault bends northward from west to east. The dome is cut by strands of the Seiyal Fault and a related set of cataclastic deformation bands showing dominantly right lateral strike slip, as well as by younger calcite veins with related patchy poikilotopic cement. High resolution satellite image analysis of the remote southwest Kharga Valley shows a similar sequence of events: older structural domes and basins located where E-W faults bend northward from west to east, right lateral offset of domes and basins along the E-W faults, and two sets of deformation band faults that lack co-located domes and basins. We suggest that field data, image analysis, and burial depth estimates are best explained by diachronous development of features along the E-W fault system. We propose that Late Mesozoic right lateral strike slip produced domes and basins in Nubia facies rocks in stepover regions above reactivated basement faults. We further suggest that the extensively linked segments of the E-W fault system in Nubia facies rocks, plus the deformation band systems, formed during the late Eocene when basement faults were again reactivated in dominantly right lateral strike slip.

The Burger Court and the Prima Facie Case in Employment Discrimination Litigation: A Critique.

ERIC Educational Resources Information Center

Friedman, Joel William

1979-01-01

The unprincipled and contrived reasoning running through these opinions manifests an intentional effort by the Court to impede litigants' ability to secure their rights to equal employment opportunity by raising the requirements of the prima facie case. Available from Fred B. Rothman & Co., 10368 West Centennial Road, Littleton, CO 80123; sc…

Phenotypic delineation of ring chromosome 15 and Russell-Silver syndromes.

PubMed Central

Wilson, G N; Sauder, S E; Bush, M; Beitins, I Z

1985-01-01

A male child with features of the Russell-Silver syndrome, including pre- and postnatal growth delay, triangular facies, bilateral fifth finger clinodactyly, and disproportionate lower extremities, was found to have a ring chromosome 15 in all peripheral leucocytes examined. Review of the reported cases of ring chromosome 15 defines a malformation syndrome with a characteristic facies related to deletion of the 15q26.2----qter region. Russell-Silver and ring 15 syndromes share clinical features such as growth deficiency, triangular facies, digital anomalies, and café-au-lait spots. Microcephaly, mental retardation, facial dysmorphology, limb anomalies, and cardiac defects are more striking in ring chromosome 15 patients and are indications for karyotyping when found in conjunction with the Russell-Silver phenotype. Images PMID:4040173

Petrofacies Analysis - A Petrophysical Tool for Geologic/Engineering Reservoir Characterization

USGS Publications Warehouse

Watney, W.L.; Guy, W.J.; Doveton, J.H.; Bhattacharya, S.; Gerlach, P.M.; Bohling, Geoffrey C.; Carr, T.R.

1998-01-01

Petrofacies analysis is defined as the characterization and classification of pore types and fluid saturations as revealed by petrophysical measurements of a reservoir. The word "petrofacies" makes an explicit link between petroleum engineers' concerns with pore characteristics as arbiters of production performance and the facies paradigm of geologists as a methodology for genetic understanding and prediction. In petrofacies analysis, the porosity and resistivity axes of the classical Pickett plot are used to map water saturation, bulk volume water, and estimated permeability, as well as capillary pressure information where it is available. When data points are connected in order of depth within a reservoir, the characteristic patterns reflect reservoir rock character and its interplay with the hydrocarbon column. A third variable can be presented at each point on the crossplot by assigning a color scale that is based on other well logs, often gamma ray or photoelectric effect, or other derived variables. Contrasts between reservoir pore types and fluid saturations are reflected in changing patterns on the crossplot and can help discriminate and characterize reservoir heterogeneity. Many hundreds of analyses of well logs facilitated by spreadsheet and object-oriented programming have provided the means to distinguish patterns typical of certain complex pore types (size and connectedness) for sandstones and carbonate reservoirs, occurrences of irreducible water saturation, and presence of transition zones. The result has been an improved means to evaluate potential production, such as bypassed pay behind pipe and in old exploration wells, or to assess zonation and continuity of the reservoir. Petrofacies analysis in this study was applied to distinguishing flow units and including discriminating pore type as an assessment of reservoir conformance and continuity. The analysis is facilitated through the use of colorimage cross sections depicting depositional sequences, natural gamma ray, porosity, and permeability. Also, cluster analysis was applied to discriminate petrophysically similar reservoir rock.

An Integration of Ground-Penetrating Radar, Remote Sensing, and Discharge Records of the Modern Kicking Horse River, BC

NASA Astrophysics Data System (ADS)

Cyples, N.; Ielpi, A.; Dirszowsky, R.

2017-12-01

The Kicking Horse River is a gravel-bed stream originating from glacial meltwater supplied by the Wapta Icefields in south-eastern British Columbia. An alluvial tract extends for 7 km through Field, BC, where the trunk channel undergoes diurnal and seasonal fluctuations in flow as a result of varying glacial-meltwater supply and runoff recharge. Prior studies erected the Kicking Horse River as a reference for proximal braided systems, and documented bar formation and sediment distribution patterns from ground observations. However, a consistent model of planform evolution and related stratigraphic signature is lacking. Specific objectives of this study are to examine the morphodynamic evolution and stratigraphic signature of channel-bar complexes using high-resolution satellite imagery, sedimentologic and discharge observations, and ground-penetrating radar (GPR). Remote sensing highlights rates of lateral channel migration of as much as 270 meters over eight years ( 34 meters/year), and demonstrates how flood stages are associated with stepwise episodes of channel braiding and anabranching. GPR analysis aided in the identification of five distinct radar facies, including: discontinuous, inclined, planar, trough-shaped, and mounded reflectors, which were respectively related to specific architectural elements and fluvial processes responsible for bar evolution. Across-stream GPR transects demonstrated higher heterogeneity in facies distribution, while downstream-oriented transects yielded a more monotonous distribution in radar facies. Notably, large-scale inclined reflectors related to step-wise bar accretion are depicted only in downstream-oriented transects, while discontinuous reflectors related to bedform stacking appear to be dominant in along-stream transects. Integration of sedimentological data with remote sensing, gauging records, and GPR analysis allows for high-resolution modelling of stepwise changes in alluvial morphology. Conceptual models stemming from such analyses can be employed to understand the depositional history and stratigraphic signature of proximal and coarse-grained fluvial systems.

Chemical Structure and Molecular Dimension As Controls on the Inherent Stability of Charcoal in Boreal Forest Soil

NASA Astrophysics Data System (ADS)

Hockaday, W. C.; Kane, E. S.; Ohlson, M.; Huang, R.; Von Bargen, J.; Davis, R.

2014-12-01

Efforts have been made by various scientific disciplines to study hyporheic zones and characterize their associated processes. One way to approach the study of the hyporheic zone is to define facies, which are elements of a (hydrobio) geologic classification scheme that groups components of a complex system with high variability into a manageable set of discrete classes. In this study, we try to classify the hyporheic zone based on the geology, geochemistry, microbiology, and understand their interactive influences on the integrated biogeochemical distributions and processes. A number of measurements have been taken for 21 freeze core samples along the Columbia River bank in the Hanford 300 Area, and unique datasets have been obtained on biomass, pH, number of microbial taxa, percentage of N/C/H/S, microbial activity parameters, as well as microbial community attributes/modules. In order to gain a complete understanding of the geological control on these variables and processes, the explanatory variables are set to include quantitative gravel/sand/mud/silt/clay percentages, statistical moments of grain size distributions, as well as geological (e.g., Folk-Wentworth) and statistical (e.g., hierarchical) clusters. The dominant factors for major microbial and geochemical variables are identified and summarized using exploratory data analysis approaches (e.g., principal component analysis, hierarchical clustering, factor analysis, multivariate analysis of variance). The feasibility of extending the facies definition and its control of microbial and geochemical properties to larger scales is discussed.

Multiple Generations of Boudinage in a P-T Path: Insights from 3D Analysis of Amphibolite Boudins in Marble on Naxos, Greece

NASA Astrophysics Data System (ADS)

von Hagke, C.; Virgo, S.; Urai, J. L.

2016-12-01

Boudins are periodic structures in mechanically layered rocks deformed by layer parallel extension. At first sight, 2D sections of boudinaged layers are similar although 3D boudin patterns can be dramatically different. We aim to develop criteria to infer 3D strain from 2D outcrop observation of boudins. In marble quarries in the high grade complex on Naxos, Greece, we studied spectacular outcrops of amphibolite and pegmatite boudins, in combination with serial slicing of quarried blocks to reconstruct the 3D boudin structures. We identified multiple boudin generations, with early, high grade pinch and swell boudins followed by two generations of brittle shearband and torn boudins formed along the retrograde path under greenschist facies conditions. This shows how the rheological contract between marble and amphibolite changes from amphibolite to greenschist facies and suggests E-W shortening and N-S stretching in the footwall of the Naxos detachment. The later phases of boudinage interact with existing boudin geometries, producing complex structures in 3D. In 2D section the complexity is not directly apparent and reveals itself only in statistical analysis of long continuous sections. Our findings highlight the importance of 3D characterization of boudinage structures for boudin classification. The insights we gain from the analysis of multiphase boudinage structures on Naxos are the basis for quantitative boudin analysis to infer rheology, effective stress, vorticity and strain and establish a mechanics-based boudin classification scheme.

Is there a Developed Oldowan A at Olduvai Gorge? A diachronic analysis of the Oldowan in Bed I and Lower-Middle Bed II at Olduvai Gorge, Tanzania.

PubMed

Proffitt, Tomos

2018-05-08

Debates regarding the validity of the Developed Oldowan as separate cultural facies within the Oldowan techno-complex have primarily concentrated on the Developed Oldowan B/Acheulean transition, with little attention paid to the validity of the Developed Oldowan A (DOA) as a valid technological differentiation. This study presents a diachronic technological analysis and comparison of Oldowan and DOA lithic assemblages from Olduvai Gorge, Tanzania, dated between 1.84 and 1.6 Ma, to test the validity of Leakey's original distinction between these two cultural facies. The results from this comparative analysis show very few technological differences between the lithic assemblages previously assigned to the DOA and Classic Oldowan. Significant diachronic variation in raw material availability and use is, however, identified between Bed I and Lower/Middle Bed II of Olduvai Gorge, which may go some way to explaining the originally perceived techno-cultural differences. The results suggest an increase in hominin knapping and percussive activities, as well as a clear ability to preferentially select high quality raw materials stratigraphically above Tuff IF. Technological innovation and complexity, however, does not seem to vary significantly between the Classic Oldowan and DOA assemblages. The results of this analysis along with similar studies from the wider eastern African region lead to the conclusion that the term Developed Oldowan A should no longer be used. Copyright © 2018 Elsevier Ltd. All rights reserved.

Volume gain during shearing of the Whatley Mill Gneiss, Pine Mountain Basement massif, eastern Alabama--A trace element approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salpas, P.A.; Daniell, N.

1993-03-01

The Whatley Mill Gneiss is the most voluminous exposure of the Pine Mountain Basement massif in eastern Alabama. Its type lithology is a proto-mylonitic gneiss composed of K-spar augen, up to 5 cm in diameter, in a finer matrix of biotite, microcline, and quartz. Granulite-facies mineral assemblages in the Whatley Mill Gneiss have been completely retrograded to amphibolite- and greenschist-facies assemblages in response to deformation that produced shear zones paralleling the foliation of the gneiss. The augen gneiss and its associated mylonites are well-exposed in a creek bed in Chewacla State Park. At this location the mineralogy of the mylonitesmore » is dominated by quartz indicating that shearing was associated with influx of a silica-rich fluid. A detailed geochemical study of these rocks shows that the augen gneiss displays relatively little variation in its major and trace element compositions while the quartz-rich mylonites display wider ranges, are enriched in SiO[sub 2] and depleted in the REE and other incompatible trace elements relative to the augen gneiss. When standard composition/volume calculations are applied to the mylonites the results show (1) the bulk of all of the elements, including the REE, were immobile during shearing with the exceptions of Si and Al which were added; and, (2) volume changes calculated using the REE as immobile elements range from +70% to +350%. Though these volume changes seem excessive, they apply to meter-thick shear zones which may actually represent only a small fraction of the total volume of the augen gneiss. Consistent with previous interpretations of these shear zones, the calculated volume gains imply shearing during extension.« less

Telescoping metamorphic isograds: Evidence from 40Ar/39A dating in the Orange-Milford belt, southern Connecticut

USGS Publications Warehouse

Kunk, Michael J.; Walsh, Gregory J.; Growdon, Martha L.; Wintsch, Robert P.

2013-01-01

New 40Ar/39Ar ages for hornblende and muscovite from the Orange-Milford belt in southern Connecticut reflect cooling from Acadian amphibolite facies metamorphism between ∼380 to 360 Ma followed by retrograde recrystallization of fabric-forming muscovite and chlorite during lower greenschist facies Alleghanian transpression at ∼280 Ma. Reported field temperature and pressure gradients are improbably high for these rocks and a NW metamorphic field gradient climbing from chlorite-grade to staurolite-grade occurs over less than 5 km. Simple tilting cannot account for this compressed isograd spacing given the geothermal gradient of ∼20 °C/km present at the time of regional metamorphism. However, post-metamorphic transpression could effectively telescope the isograds by stretching the belt at an oblique angle to the isograd traces. Textures in the field and in thin section reveal several older prograde schistosities overprinted by lower greenschist facies fabrics. The late cleavages commonly occur at the scale of ∼100 μm and these samples contain multiple age populations of white mica. 40Ar/39Ar analysis of these poly-metamorphic samples with mixed muscovite populations yield climbing or U-shaped age spectra. The ages of the low temperature steps are late Paleozoic, while the ages of the older steps are late Devonian. These results support our petrologic interpretation that the younger cleavage developed under metamorphic conditions below the closure temperature for Ar diffusion in muscovite, that is, in the lower greenschist facies. The correlation of a younger regionally reproducible age population with a pervasive retrograde muscovite ± chlorite cleavage reveals an Alleghanian (∼280 Ma) overprint on the Acadian metamorphic gradient (∼380 Ma). Outcrop-scale structures including drag folds and imbricate boudins suggest that Alleghanian deformation and cleavage development occurred in response to dextral transpression along a northeast striking boundary. Alleghanian oblique collision of accreting terranes from the northeast would have resulted in northeast-southwest dextral transpression against the New York promontory. This deformation was responsible for crystallization of pervasive retrograde muscovite + chlorite cleavages and associated telescoping of the Acadian metamorphic isograds in southern Connecticut at ∼280 Ma.

Sedimentology and ichnology of two Lower Triassic sections in South China: Implications for the biotic recovery following the end-Permian mass extinction

NASA Astrophysics Data System (ADS)

Luo, Mao; George, Annette D.; Chen, Zhong-Qiang

2016-09-01

Biotic recovery following the end-Permian mass extinction was investigated using trace fossil and facies analysis of two Lower-Middle Triassic sections in South China. The Susong section (Lower Yangtze Sedimentary Province) comprises a range of carbonate and mudstone facies that record overall shallowing from offshore to intertidal settings. The Tianshengqiao section (Upper Yangtze Sedimentary Province) consists of mixed carbonate and siliciclastic facies deposited in shallow marine to offshore settings. Griesbachian to Dienerian ichnological records in both sections are characterized by low ichnodiversity, low ichnofabric indices (1-2) and low bedding plane bioturbation indices (1-2). Higher ichnofabric indices (3 and 4), corresponding to a dense population of diminutive ichnotaxon, in the Tianshengqiao section suggest opportunistic infaunal biotic activity during the earliest Triassic. Ichnological data from the Susong section show an increase in ichnodiversity during the late Smithian with 11 ichnogenera identified and increased ichnofabric indices of 4-5 and bedding plane bioturbation indices of 3-5. Although complex traces such as Rhizocorallium are present in Spathian-aged strata in this section, low ichnodiversity and ichnofabric indices and diminutive Planolites suggest a decline in recovery. In the Tianshengqiao section, ichnofabric indices are moderate to high (3-5) although only six ichnogenera are present and Planolites burrows are consistently small in Smithian and Spathian strata. Complex traces, such as large Rhizocorallium and Thalassinoides, and large Planolites, did not appear until the Anisian. Ichnological results from both sections record the response of organisms to unfavourable environmental conditions although the Susong section shows earlier recovery during the Smithian prior to latest Smithian-Spathian decline. This decline may have resulted from a resurgence of euxinic to anoxic marine environment in various regions of South China. Ichnological data from the Tianshengqiao section indicate protracted recovery throughout the Early Triassic as previously found elsewhere in South China. Comparison of the South China trace fossil records with global ichnological data show a diachronous pattern of recovery of trace makers and highlights the heterogeneous development of oxic facies on the marked variation in recovery rate.

A new reconstruction of the Paleozoic continental margin of southwestern North America: Implications for the nature and timing of continental truncation and the possible role of the Mojave-Sonora megashear

USGS Publications Warehouse

Stevens, C.H.; Stone, P.; Miller, J.S.

2005-01-01

Data bearing on interpretations of the Paleozoic and Mesozoic paleogeography of southwestern North America are important for testing the hypothesis that the Paleozoic miogeocline in this region has been tectonically truncated, and if so, for ascertaining the time of the event and the possible role of the Mojave-Sonora megashear. Here, we present an analysis of existing and new data permitting reconstruction of the Paleozoic continental margin of southwestern North America. Significant new and recent information incorporated into this reconstruction includes (1) spatial distribution of Middle to Upper Devonian continental-margin facies belts, (2) positions of other paleogeographically significant sedimentary boundaries on the Paleozoic continental shelf, (3) distribution of Upper Permian through Upper Triassic plutonic rocks, and (4) evidence that the southern Sierra Nevada and western Mojave Desert are underlain by continental crust. After restoring the geology of western Nevada and California along known and inferred strike-slip faults, we find that the Devonian facies belts and pre-Pennsylvanian sedimentary boundaries define an arcuate, generally south-trending continental margin that appears to be truncated on the southwest. A Pennsylvanian basin, a Permian coral belt, and a belt of Upper Permian to Upper Triassic plutons stretching from Sonora, Mexico, into westernmost central Nevada, cut across the older facies belts, suggesting that truncation of the continental margin occurred in the Pennsylvanian. We postulate that the main truncating structure was a left-lateral transform fault zone that extended from the Mojave-Sonora megashear in northwestern Mexico to the Foothills Suture in California. The Caborca block of northwestern Mexico, where Devonian facies belts and pre-Pennsylvanian sedimentary boundaries like those in California have been identified, is interpreted to represent a missing fragment of the continental margin that underwent ???400 km of left-lateral displacement along this fault zone. If this model is correct, the Mojave-Sonora megashear played a direct role in the Pennsylvanian truncation of the continental margin, and any younger displacement on this fault has been relatively small. ?? 2005 Geological Society of America.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamlin, H.S.; Dutton, S.P.; Tyler, N.

The Tirrawarra Sandstone contains 146 million bbl of oil in Tirrawarra field in the Cooper basin of South Australia. We used core, well logs, and petro-physical data to construct a depositional-facies-based flow-unit model of the reservoir, which describes rock properties and hydrocarbon saturations in three dimensions. Using the model to calculate volumes and residency of original and remaining oil in place, we identified an additional 36 million bbl of oil in place and improved understanding of past production patterns. The Tirrawarra Sandstone reservoir was deposited in a Carboniferous-Permian proglacial intracratonic setting and is composed of lacustrine and fluvial facies assemblages.more » The stratigraphic framework of these nonmarine facies is defined by distinctive stacking patterns and erosional unconformities. Mudstone dominated zones that are analogous to marine maximum flooding surfaces bound the reservoir. At its base a progradational lacustrine-delta system, composed of lenticular mud-clast-rich sandstones enclosed in mudstone, is truncated by an unconformity. Sandstones in these lower deltaic facies lost most of their porosity by mechanical compaction of ductile grains. Sediment reworking by channel migration and locally shore-zone processes created by quartz-rich, multilateral sandstones, which retained the highest porosity and permeability of all the reservoir facies and contained most of the original oil in place. Braided-channel sandstones, however, are overlain by lenticular meandering-channel sandstones, which in turn grade upward into widespread mudstones and coals. Thus, this uppermost part of the reservoir displays a retrogradational stacking pattern and upward-decreasing reservoir quality. Our results demonstrate that depositional variables are the primary controls on reservoir quality and productivity in the Tirrawarra Sandstone.« less

Evolution of a Holocene delta driven by episodic sediment delivery and coseismic deformation, Puget Sound, Washington, USA

USGS Publications Warehouse

Barnhardt, W.A.; Sherrod, B.L.

2006-01-01

Episodic, large-volume pulses of volcaniclastic sediment and coseismic subsidence of the coast have influenced the development of a late Holocene delta at southern Puget Sound. Multibeam bathymetry, ground-penetrating radar (GPR) and vibracores were used to investigate the morphologic and stratigraphic evolution of the Nisqually River delta. Two fluvial–deltaic facies are recognized on the basis of GPR data and sedimentary characteristics in cores, which suggest partial emplacement from sediment-rich floods that originated on Mount Rainier. Facies S consists of stacked, sheet-like deposits of andesitic sand up to 4 m thick that are continuous across the entire width of the delta. Flat-lying, highly reflective surfaces separate the sand sheets and comprise important facies boundaries. Beds of massive, pumice- and charcoal-rich sand overlie one of the buried surfaces. Organic-rich material from that surface, beneath the massive sand, yielded a radiocarbon age that is time-correlative with a series of known eruptive events that generated lahars in the upper Nisqually River valley. Facies CF consists of linear sandbodies or palaeochannels incised into facies S on the lower delta plain. Radiocarbon ages of wood fragments in the sandy channel-fill deposits also correlate in time to lahar deposits in upstream areas. Intrusive, sand-filled dikes and sills indicate liquefaction caused by post-depositional ground shaking related to earthquakes. Continued progradation of the delta into Puget Sound is currently balanced by tidal-current reworking, which redistributes sediment into large fields of ebb- and flood-oriented bedforms.

Zircon ages in granulite facies rocks: decoupling from geochemistry above 850 °C?

NASA Astrophysics Data System (ADS)

Kunz, Barbara E.; Regis, Daniele; Engi, Martin

2018-03-01

Granulite facies rocks frequently show a large spread in their zircon ages, the interpretation of which raises questions: Has the isotopic system been disturbed? By what process(es) and conditions did the alteration occur? Can the dates be regarded as real ages, reflecting several growth episodes? Furthermore, under some circumstances of (ultra-)high-temperature metamorphism, decoupling of zircon U-Pb dates from their trace element geochemistry has been reported. Understanding these processes is crucial to help interpret such dates in the context of the P-T history. Our study presents evidence for decoupling in zircon from the highest grade metapelites (> 850 °C) taken along a continuous high-temperature metamorphic field gradient in the Ivrea Zone (NW Italy). These rocks represent a well-characterised segment of Permian lower continental crust with a protracted high-temperature history. Cathodoluminescence images reveal that zircons in the mid-amphibolite facies preserve mainly detrital cores with narrow overgrowths. In the upper amphibolite and granulite facies, preserved detrital cores decrease and metamorphic zircon increases in quantity. Across all samples we document a sequence of four rim generations based on textures. U-Pb dates, Th/U ratios and Ti-in-zircon concentrations show an essentially continuous evolution with increasing metamorphic grade, except in the samples from the granulite facies, which display significant scatter in age and chemistry. We associate the observed decoupling of zircon systematics in high-grade non-metamict zircon with disturbance processes related to differences in behaviour of non-formula elements (i.e. Pb, Th, U, Ti) at high-temperature conditions, notably differences in compatibility within the crystal structure.

Sedimentary processes and architecture of Upper Cretaceous deep-sea channel deposits: a case from the Skole Nappe, Polish Outer Carpathians

NASA Astrophysics Data System (ADS)

Łapcik, Piotr

2018-02-01

Deep-sea channels are one of the architectonic elements, forming the main conduits for sand and gravel material in the turbidite depositional systems. Deep-sea channel facies are mostly represented by stacking of thick-bedded massive sandstones with abundant coarse-grained material, ripped-up clasts, amalgamation and large scale erosional structures. The Manasterz Quarry of the Ropianka Formation (Upper Cretaceous, Skole Nappe, Carpathians) contains a succession of at least 31 m of thick-bedded high-density turbidites alternated with clast-rich sandy debrites, which are interpreted as axial deposits of a deep-sea channel. The section studied includes 5 or 6 storeys with debrite basal lag deposits covered by amalgamated turbidite fills. The thickness of particular storeys varies from 2.5 to 13 m. Vertical stacking of similar facies through the whole thickness of the section suggest a hierarchically higher channel-fill or a channel complex set, with an aggradation rate higher than its lateral migration. Such channel axis facies cannot aggrade without simultaneous aggradation of levee confinement, which was distinguished in an associated section located to the NW from the Manasterz Quarry. Lateral offset of channel axis facies into channel margin or channel levee facies is estimated at less than 800 m. The Manasterz Quarry section represents mostly the filling and amalgamation stage of channel formation. The described channel architectural elements of the Ropianka Formation are located within the so-called Łańcut Channel Zone, which was previously thought to be Oligocene but may have been present already in the Late Cretaceous.

Protolith and metamorphic ages of the Haiyangsuo Complex, eastern China: A non-UHP exotic tectonic slab in the Sulu ultrahigh-pressure terrane

USGS Publications Warehouse

Liou, J.G.; Tsujimori, T.; Chu, W.; Zhang, R.Y.; Wooden, J.L.

2006-01-01

The Haiyangsuo Complex in the NE Sulu ultrahigh-pressure (UHP) terrane has discontinuous, coastal exposures of Late Archean gneiss with amphibolitized granulite, amphibolite, Paleoproterozoic metagabbroic intrusives, and Cretaceous granitic dikes over an area of about 15 km2. The U-Pb SHRIMP dating of zircons indicates that theprotolith age of a garnet-biotite gneiss is >2500 Ma, whereas the granulite-facie metamorphism occurred at around 1800 Ma. A gabbroic intrusion was dated at ???1730 Ma, and the formation of amphibolite-facies assemblages in both metagabbro and granulite occurred at ???340-460 Ma. Petrologic and geochronological data indicate that these various rocks show no evidence of Triassic eclogite-facies metamorphism and Neoproterozoic protolith ages that are characteristics of Sulu-Dabie HP-UHP rocks, except Neoproterozoic inherited ages from post-collisional Jurassic granitic dikes. Haiyangsuo retrograde granulites with amphibolite-facies assemblages within the gneiss preserve relict garnet formed during granulite-facies metamorphism at ???1.85 Ga. The Paleoproterozoic metamorphic events are almost coeval with gabbroic intrusions. The granulite-bearing gneiss unit and gabbro-dominated unit of the Haiyangsuo Complex were intruded by thin granitic dikes at about 160 Ma, which is coeval with post-collisional granitic intrusions in the Sulu terrane. We suggest that the Haiyangsuo Complex may represent a fragment of the Jiao-Liao-Ji Paleoproterozoic terrane developed at the eastern margin of the Sino-Korean basement, which was juxtaposed with the Sulu terrane prior to Jurassic granitic activity and regional deformation. ?? Springer-Verlag 2006.

Classical seismic sequence stratigraphic interpretation of intraslope basin fill: Deepwater Nigeria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duncan, E.A.

Detailed interpretation of seismic facies patterns performed within the workstation environment provides an observation based methodology for constructing depositional models of turbidite and other reservoir bearing systems expected in deepwater Nigeria. The increased fidelity of the workstation allows greater detail and accuracy to be imposed onto depositional model construction by vastly improving the discrimination of depositional from structural seismic reflection geometries. In deepwater Nigeria interslope basins, depositional cyclicity is clearly indicated by vertical seismic facies successions in the same way as can be recognized in bed thickness trends from outcrop or well log data. The recognition of the seismic faciesmore » successions appears to break the stratigraphy into at least fourth and fifth order scale sequences. Highly {open_quotes}zoomed{close_quotes} instantaneous phase displays enhance the reflection character so that near outcrop scale (resolution less than 50 mters) interpretations of depositional facies can be made. Common seismic facies and geologic interpretation include: (1) low angle erosional surfaces as channel scour or mass wasting detachment; (2) low relief mounds, often in compensation cycle overlapping stacks reflecting compacted channelbelt fill; (3) unidirectional, low angle clinoform sets suggesting laterial accretion within a channel belt or possible contourite mounds; (4) abrupt, shingled blocks illustrating tilted fault blocks of small scale intraformation slumping; and (5) high reflection amplitude and continuous, parallel reflections of pelagic and hemipelagic condensed sections. There are other subtle seismic facies resolvable given the incraesed fidelity of the workstation interpretation. Mapping and translation of these geometries into more robust stratigraphic predictions should have positive impact on exploration and development success.« less

Diverse mineral compositions, textures, and metamorphic P-T conditions of the glaucophane-bearing rocks in the Tamayen mélange, Yuli belt, eastern Taiwan

NASA Astrophysics Data System (ADS)

Tsai, Chin-Ho; Iizuka, Yoshiyuki; Ernst, W. G.

2013-02-01

This paper presents new petrologic data for high-pressure, low-temperature (HP-LT) metamorphic rocks at Juisui. We reinterpret the so-called "Tamayen block" (Yang and Wang, 1985) or "Juisui block" (Liou, 1981; Beyssac et al., 2008) as a tectonic mélange. It is not a coherent sheet but rather a mixture dominated by greenschist and pelitic schist with pods of serpentinite, epidote amphibolite, and rare blueschist. Four types of glaucophane-bearing rocks are newly recognized in this mélange. Type I is in contact with greenschist lacking glaucophane and garnet. Glaucophane is present only as rare inclusions within pargasite. This type records metamorphic evolution from epidote blueschists-, epidote amphibolite-, to greenschist-facies. Type II contains characteristic zoned amphiboles from barroisite core to Mg-katophorite mantle and glaucophane rim, implying an epidote amphibolite-facies stage overprinted by an epidote blueschists-facies one. Type III includes winchite and indicates P-T conditions of about 6-8 kbar, approaching 400 °C. Type IV contains paragonite but lacks garnet; amphibole shows a Na-Ca core surrounded by a glaucophane rim. This type shows a high-pressure (?) epidote amphibolite-facies stage overprinted by an epidote blueschists-facies one. Amphibole zoning trends and mineral assemblages imply contradictory P-T paths for the four types of glaucophane-bearing rocks—consistent with the nature of a tectonic mélange. The new P-T constraints and petrologic findings differ from previous studies (Liou et al., 1975; Beyssac et al., 2008).

Publications - PIR 2003-1 | Alaska Division of Geological & Geophysical

Science.gov Websites

, Alluvial facies and paleosols in the Cretaceous Nanushuk formation, Kanayut River, North Slope, Alaska Surveys Skip to content State of Alaska myAlaska My Government Resident Business in Alaska content DGGS PIR 2003-1 Publication Details Title: Alluvial facies and paleosols in the Cretaceous

The Student-Athlete and the National Collegiate Athletic Association: The Need for a Prima Facie Tort Doctrine

ERIC Educational Resources Information Center

Duckworth, Roy D., III

1975-01-01

In examining whether courts have jurisdiction to hear student-athlete grievances against the National Collegiate Athletic Association (NCAA) the author rejects the position that the NCAA's activities are under cover of state law, and instead proposes that the student-athlete's remedy lies in an action against the NCAA for a prima facie tort. (JT)

76 FR 60651 - Leased Commercial Access; Development of Competition and Diversity in Video Programming...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... prima facie case but is not required. For example, an e-mail from the defendant MVPD stating that the... situated'' if only one of these factors is found to be similar. For example, a complainant is unlikely to... complainant must demonstrate in its complaint to establish a prima facie case of a program carriage violation...

Deltaic sedimentation and stratigraphic sequences in post-orogenic basins, Western Greece

NASA Astrophysics Data System (ADS)

Piper, David J. W.; Kontopoulos, N.; Panagos, A. G.

1988-03-01

Post-orogenic basin sediments in the gulfs of Corinth, Patras and Amvrakia, on the western coast of Greece, occur in four tectonic settings: (1) true graben; (2) simple and complex half graben; (3) shallow half graben associated with the high-angel surface traces of thrust faults; and (4) marginal depressions adjacent to graben in which sediment loading has occurred. Late Quaternary facies distribution has been mapped in all three basins. Sea level changes, interacting with the apparently fortuitous elevation of horsts at basin margins, result in a complex alternation of well-mixed marine, stratified marine, brackish and lacustrine facies. Organic carbon contents of muds are high in all but the well-mixed marine facies. Basin margin slope is the most important determinant of facies distribution. The steep slopes of the Gulf of Corinth half graben result in fan-deltas which deliver coarse sediments in turbidity currents to the deep basin floor. Where gradients are reduced by marginal downwarping (Gulf of Patras) or on the gentle slopes of thrust-related half graben (Gulf of Amvrakia) coarse sediments are trapped on the subaerial delta or the coastal zone, and the fine sediment reaching the basin floor appears derived mainly from muddy plumes during winter floods.