facilities design destined: Topics by Science.gov

Sample records for facilities design destined

Space Transportation and Destination Facilities

NASA Technical Reports Server (NTRS)

Smitherman, David; McClure, Wallace

1999-01-01

The Space Transportation and Destination Facilities section focused on space transportation vehicles-from use of existing vehicles to development of specialized transports-and on space stations, space business parks, space hotels, and other facilities in space of the kind that eventually would provide services for general public space travel (PST) and tourism. For both transportation and destination facilities, the emphasis was on the identification of various strategies to enable a realistic incremental progression in the development and acquisition of such facilities, and the identification of issues that need resolution to enable formation of viable businesses. The approach was to determine the best: (1) Strategies for general PST and tourism development through the description and analysis of a wide range of possible future scenarios. With these scenarios in mind the section then identified. (2) Key issues to be explored. (3) opportunities to eliminate barriers. (4) Recommendations for future actions. (5) Top-level requirements and characteristics for general PST and tourism systems and services that would guide the development of transportation and destination facilities.
Hospital Ownership of a Postacute Care Facility Influences Discharge Destinations After Emergent Surgery.

PubMed

Abdelsattar, Zaid M; Gonzalez, Andrew A; Hendren, Samantha; Regenbogen, Scott E; Wong, Sandra L

2016-08-01

The aim of the study was to identify hospital characteristics associated with variation in patient disposition after emergent surgery. Colon resections in elderly patients are often done in emergent settings. Although these operations are known to be riskier, there are limited data regarding postoperative discharge destination. We evaluated Medicare beneficiaries who underwent emergent colectomy between 2008 and 2010. Using hierarchical logistic regression, we estimated patient and hospital-level risk-adjusted rates of nonhome discharges. Hospitals were stratified into quintiles based on their nonhome discharge rates. Generalized linear models were used to identify hospital structural characteristics associated with nonhome discharges (comparing discharge to skilled nursing facilities vs home with/without home health services). Of the 122,604 patients surviving to discharge after emergent colectomy at 3012 hospitals, 46.7% were discharged to a nonhome destination. There was a wide variation in risk and reliability-adjusted nonhome discharge rates across hospitals (15% to 80%). Patients at hospitals in the highest quintile of nonhome discharge rates were more likely to have longer hospitalizations (15.1 vs 13.2; P < 0.001) and more complications (43.2% vs 34%; P < 0.001). On multivariable analysis, only hospital ownership of a skilled nursing facility (P < 0.001), teaching status (P = 0.025), and low nurse-to-patient ratios (P = 0.002) were associated with nonhome discharges. Nearly half of Medicare beneficiaries are discharged to a nonhome destination after emergent colectomy. Hospital ownership of a skilled nursing facility and low nurse-to-patient ratios are highly associated with nonhome discharges. This may signify the underlying financial incentives to preferentially utilize postacute care facilities under the traditional fee-for-service payment model.
A Common Probe Design for Multiple Planetary Destinations

NASA Technical Reports Server (NTRS)

Hwang, H. H.; Allen, G. A., Jr.; Alunni, A. I.; Amato, M. J.; Atkinson, D. H.; Bienstock, B. J.; Cruz, J. R.; Dillman, R. A.; Cianciolo, A. D.; Elliott, J. O.;

2018-01-01

Atmospheric probes have been successfully flown to planets and moons in the solar system to conduct in situ measurements. They include the Pioneer Venus multi-probes, the Galileo Jupiter probe, and Huygens probe. Probe mission concepts to five destinations, including Venus, Jupiter, Saturn, Uranus, and Neptune, have all utilized similar-shaped aeroshells and concept of operations, namely a 45-degree sphere cone shape with high density heatshield material and parachute system for extracting the descent vehicle from the aeroshell. Each concept designed its probe to meet specific mission requirements and to optimize mass, volume, and cost. At the 2017 International Planetary Probe Workshop (IPPW), NASA Headquarters postulated that a common aeroshell design could be used successfully for multiple destinations and missions. This "common probe"� design could even be assembled with multiple copies, properly stored, and made available for future NASA missions, potentially realizing savings in cost and schedule and reducing the risk of losing technologies and skills difficult to sustain over decades. Thus the NASA Planetary Science Division funded a study to investigate whether a common probe design could meet most, if not all, mission needs to the five planetary destinations with extreme entry environments. The Common Probe study involved four NASA Centers and addressed these issues, including constraints and inefficiencies that occur in specifying a common design. Study methodology: First, a notional payload of instruments for each destination was defined based on priority measurements from the Planetary Science Decadal Survey. Steep and shallow entry flight path angles (EFPA) were defined for each planet based on qualification and operational g-load limits for current, state-of-the-art instruments. Interplanetary trajectories were then identified for a bounding range of EFPA. Next, 3-degrees-of-freedom simulations for entry trajectories were run using the entry state

Trauma care in Scotland: effect of rurality on ambulance travel times and level of destination healthcare facility.

PubMed

Yeap, E E; Morrison, J J; Apodaca, A N; Egan, G; Jansen, J O

2014-06-01

The aim of this study was to determine the effect of rurality on the level of destination healthcare facility and ambulance response times for trauma patients in Scotland. We used a retrospective analysis of pre-hospital data routinely collected by the Scottish Ambulance Service from 2009-2010. Incident locations were categorised by rurality, using the Scottish urban/rural classification. The level of destination healthcare facility was coded as either a teaching hospital, large general hospital, general hospital, or other type of facility. A total of 64,377 incidents met the inclusion criteria. The majority of incidents occurred in urban areas, which mostly resulted in admission to teaching hospitals. Incidents from other areas resulted in admission to a lower-level facility. The majority of incidents originating in very remote small towns and very remote rural areas were treated in a general hospital. Median call-out times and travel times increased with the degree of rurality, although with some exceptions. Trauma is relatively rare in rural areas, but patients injured in remote locations are doubly disadvantaged by prolonged pre-hospital times and admission to a hospital that may not be adequately equipped to deal with their injuries. These problems may be overcome by the regionalisation of trauma care, and enhanced retrieval capability.
Does the presence and mix of destinations influence walking and physical activity?

PubMed

King, Tania Louise; Bentley, Rebecca Jodie; Thornton, Lukar Ezra; Kavanagh, Anne Marie

2015-09-17

Local destinations have previously been shown to be associated with higher levels of both physical activity and walking, but little is known about how specific destinations are related to activity. This study examined associations between types and mix of destinations and both walking frequency and physical activity. The sample consisted of 2349 residents of 50 urban areas in metropolitan Melbourne, Australia. Using geographic information systems, seven types of destinations were examined within three network buffers (400 meters (m), 800 m and 1200 m) of respondents' homes. Multilevel logistic regression was used to estimate effects of each destination type separately, as well as destination mix (variety) on: 1) likelihood of walking for at least 10 min ≥ 4/week; 2) likelihood of being sufficiently physically active. All models were adjusted for potential confounders. All destination types were positively associated with walking frequency, and physical activity sufficiency at 1200 m. For the 800 m buffer: all destinations except transport stops and sports facilities were significantly associated with physical activity, while all except sports facilities were associated with walking frequency; at 400 m, café/takeaway food stores and transport stops were associated with walking frequency and physical activity sufficiency, and sports facilities were also associated with walking frequency. Strongest associations for both outcomes were observed for community resources and small food stores at both 800 m and 1200 m. For all buffer distances: greater mix was associated with greater walking frequency. Inclusion of walking in physical activity models led to attenuation of associations. The results of this analysis indicate that there is an association between destinations and both walking frequency and physical activity sufficiency, and that this relationship varies by destination type. It is also clear that greater mix of destinations positively predicts walking
Destination Math. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2009

2009-01-01

"Destination Math" is a series of computer-based curricula designed to be used for at least 90 minutes a week. Featuring sequenced, prescriptive, step-by-step instruction, "Destination Math" is designed for the development of fluency in critical skills, math reasoning, conceptual understanding, and problem-solving skills.…
Generating Multi-Destination Maps.

PubMed

Zhang, Junsong; Fan, Jiepeng; Luo, Zhenshan

2017-08-01

Multi-destination maps are a kind of navigation maps aimed to guide visitors to multiple destinations within a region, which can be of great help to urban visitors. However, they have not been developed in the current online map service. To address this issue, we introduce a novel layout model designed especially for generating multi-destination maps, which considers the global and local layout of a multi-destination map. We model the layout problem as a graph drawing that satisfies a set of hard and soft constraints. In the global layout phase, we balance the scale factor between ROIs. In the local layout phase, we make all edges have good visibility and optimize the map layout to preserve the relative length and angle of roads. We also propose a perturbation-based optimization method to find an optimal layout in the complex solution space. The multi-destination maps generated by our system are potential feasible on the modern mobile devices and our result can show an overview and a detail view of the whole map at the same time. In addition, we perform a user study to evaluate the effectiveness of our method, and the results prove that the multi-destination maps achieve our goals well.
Destination healthcare facility of shocked trauma patients in Scotland: analysis of transfusion and surgical capability of receiving hospitals.

PubMed

Peach, Christopher M; Morrison, Jonathan J; Apodaca, Amy N; Egan, Gerry; Watson, Henry G; Jansen, Jan O

2013-10-01

Haemorrhage is a leading cause of death from trauma. Management requires a combination of haemorrhage control and resuscitation which may incur significant surgical and transfusion utilisation. The aim of this study is to evaluate the resource provision of the destination hospital of Scottish trauma patients exhibiting evidence of pre-hospital shock. Patients who sustained a traumatic injury between November 2008 and October 2010 were retrospectively identified from the Scottish Ambulance Service electronic patients record system. Patients with a systolic blood pressure less than 110 mmHg or if missing, a heart rate greater than 120 bpm, were considered in shock. The level of the destination healthcare facility was classified in terms of surgical and transfusion capability. Patients with and without shock were compared. There were 135,004 patients identified, 133,651 (99.0%) of whom had sustained blunt trauma, 68,411 (50.7%) were male and the median (IQR) age was 59 (46). There were 6721 (5.0%) patients with shock, with a similar age and gender distribution to non-shocked patients. Only 1332 (19.8%) of shocked patients were taken to facilities with full surgical capability, 5137 (76.4%) to hospitals with limited (general and orthopaedic surgery only) and 252 (3.7%) to hospitals with no surgical services. In terms of transfusion capability, 5556 (82.7%) shocked patients were admitted to facilities with full capability and 1165 (17.3%) to a hospital with minimal or no capability. The majority of Scottish trauma patients are transported to a hospital with full transfusion capability, although the majority lack surgical sub-specialty representation. Copyright © 2013 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.
Using kernel density estimation to understand the influence of neighbourhood destinations on BMI

PubMed Central

King, Tania L; Bentley, Rebecca J; Thornton, Lukar E; Kavanagh, Anne M

2016-01-01

Objectives Little is known about how the distribution of destinations in the local neighbourhood is related to body mass index (BMI). Kernel density estimation (KDE) is a spatial analysis technique that accounts for the location of features relative to each other. Using KDE, this study investigated whether individuals living near destinations (shops and service facilities) that are more intensely distributed rather than dispersed, have lower BMIs. Study design and setting A cross-sectional study of 2349 residents of 50 urban areas in metropolitan Melbourne, Australia. Methods Destinations were geocoded, and kernel density estimates of destination intensity were created using kernels of 400, 800 and 1200 m. Using multilevel linear regression, the association between destination intensity (classified in quintiles Q1(least)–Q5(most)) and BMI was estimated in models that adjusted for the following confounders: age, sex, country of birth, education, dominant household occupation, household type, disability/injury and area disadvantage. Separate models included a physical activity variable. Results For kernels of 800 and 1200 m, there was an inverse relationship between BMI and more intensely distributed destinations (compared to areas with least destination intensity). Effects were significant at 1200 m: Q4, β −0.86, 95% CI −1.58 to −0.13, p=0.022; Q5, β −1.03 95% CI −1.65 to −0.41, p=0.001. Inclusion of physical activity in the models attenuated effects, although effects remained marginally significant for Q5 at 1200 m: β −0.77 95% CI −1.52, −0.02, p=0.045. Conclusions This study conducted within urban Melbourne, Australia, found that participants living in areas of greater destination intensity within 1200 m of home had lower BMIs. Effects were partly explained by physical activity. The results suggest that increasing the intensity of destination distribution could reduce BMI levels by encouraging higher levels of physical activity
Exploration Space Suit Architecture and Destination Environmental-Based Technology Development

NASA Technical Reports Server (NTRS)

Hill, Terry R.; McFarland, Shane M.; Korona, F. Adam

2013-01-01

This paper continues forward where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars left off in the development of a space suit architecture that is modular in design and could be reconfigured prior to launch or during any given mission depending on the tasks or destination. This space suit system architecture and technologies required based on human exploration (EVA) destinations will be discussed, and how these systems should evolve to meet the future exploration EVA needs of the US human space flight program. A series of exercises and analyses provided a strong indication that the Constellation Program space suit architecture, with its maximum reuse of technology and functionality across a range of mission profiles and destinations, is postured to provide a viable solution for future space exploration missions. The destination environmental analysis demonstrates that the modular architecture approach could provide the lowest mass and mission cost for the protection of the crew, given any human mission outside of low-Earth orbit. Additionally, some of the high-level trades presented here provide a review of the environmental and nonenvironmental design drivers that will become increasingly important as humans venture farther from Earth. The presentation of destination environmental data demonstrates a logical clustering of destination design environments that allows a focused approach to technology prioritization, development, and design that will maximize the return on investment, largely independent of any particular design reference mission.
[Characteristics of the clients in a geriatric intermediate care facility located in the suburbs of an urban area and factors related to the discharge destinations desired by family caregivers].

PubMed

Watanabe, M; Kono, K; Nishiura, K; Miyata, K; Saito, M

1999-01-01

Among the clients in a geriatric intermediate care facility located in the suburbs of Osaka and their family caregivers (72 subjects), the characteristics of the clients and their caregivers, and the discharge destination desired by their family caregivers were investigated, and the associated factors were evaluated. 1. Characteristics of the clients. The clients were elderly females with a low degree of independence, and dementia was observed in about 60% of them. The clients had a relatively large number of children, but many of them lived alone before admission. The rate of admission from hospitals was high (54%), and that of discharge to hospitals was also high (50%). Sixty-seven percent of the clients stayed for a long duration of over 6 months. 2. Conditions of the family caregivers. Most of the family caregivers were daughters or daughters-in-law, and considered themselves to be healthy. Sixty-three percent of the caregivers had jobs. However, most of the caregivers did not have sub-caregiver. 3. Factors related to the discharge destination desired by family caregivers. Not many family caregivers (19.4%) wanted them to go back to their homes after discharge, but their preferred discharge destinations were home (19.4%), hospitals (55.5%), and nursing homes (25.1%). The caregivers of single household clients often desired a nursing home as the discharge destination, and those of the clients from a 2- or 3-generation household often desired a hospital. The factors related to the discharge destination desired by client's family caregivers were that the client not show dementia, the job of the caregiver was a part-time job, there was a sub-caregiver, and the client had the experience of home public health nursing visits. This study showed, the percentage of the clients discharged from the geriatric intermediate care facility to their homes was low, and that of the family caregivers who desired their home as the discharge destination was also low. However, the
Safe design of healthcare facilities

PubMed Central

Reiling, J

2006-01-01

The physical environment has a significant impact on health and safety; however, hospitals have not been designed with the explicit goal of enhancing patient safety through facility design. In April 2002, St Joseph's Community Hospital of West Bend, a member of SynergyHealth, brought together leaders in healthcare and systems engineering to develop a set of safety‐driven facility design recommendations and principles that would guide the design of a new hospital facility focused on patient safety. By introducing safety‐driven innovations into the facility design process, environmental designers and healthcare leaders will be able to make significant contributions to patient safety. PMID:17142606
Exploration Space Suit Architecture and Destination Environmental-Based Technology Development

NASA Technical Reports Server (NTRS)

Hill, Terry R.; McFarland, Shane M.; Korona, F. Adam

2013-01-01

This paper continues forward where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars1 left off in the development of a space suit architecture that is modular in design and could be reconfigured prior to launch or during any given mission depending on the tasks or destination. This paper addresses the space suit system architecture and technologies required based on human exploration (EVA) destinations, and describes how these systems should evolve to meet the future exploration EVA needs of the US human space flight program. A series of exercises and analyses provided a strong indication that the Constellation Program space suit architecture, with its maximum reuse of technology and functionality across a range of mission profiles and destinations, is postured to provide a viable solution for future space exploration missions. The destination environmental analysis demonstrates that the modular architecture approach could provide the lowest mass and mission cost for the protection of the crew, given any human mission outside of low-Earth orbit. Additionally, some of the high-level trades presented here provide a review of the environmental and non-environmental design drivers that will become increasingly important as humans venture farther from Earth. This paper demonstrates a logical clustering of destination design environments that allows a focused approach to technology prioritization, development, and design that will maximize the return on investment, largely independent of any particular design reference mission.
Branding campaign: Emory Healthcare, Adam Arkin, promote hospital as destination.

PubMed

2006-01-01

Popular actor Adam Arkin (Chicago Hope, Commander in Chief) teamed up with Emory Healthcare-an 800-bed, three-hospital health system located in Atlanta-to promote the hospital's cardiology and oncology services, and to brand the facility as a destination hospital that's free of stress and hassle.
Interactive visual exploration and analysis of origin-destination data

NASA Astrophysics Data System (ADS)

Ding, Linfang; Meng, Liqiu; Yang, Jian; Krisp, Jukka M.

2018-05-01

In this paper, we propose a visual analytics approach for the exploration of spatiotemporal interaction patterns of massive origin-destination data. Firstly, we visually query the movement database for data at certain time windows. Secondly, we conduct interactive clustering to allow the users to select input variables/features (e.g., origins, destinations, distance, and duration) and to adjust clustering parameters (e.g. distance threshold). The agglomerative hierarchical clustering method is applied for the multivariate clustering of the origin-destination data. Thirdly, we design a parallel coordinates plot for visualizing the precomputed clusters and for further exploration of interesting clusters. Finally, we propose a gradient line rendering technique to show the spatial and directional distribution of origin-destination clusters on a map view. We implement the visual analytics approach in a web-based interactive environment and apply it to real-world floating car data from Shanghai. The experiment results show the origin/destination hotspots and their spatial interaction patterns. They also demonstrate the effectiveness of our proposed approach.
Post-Acute Care Facility as a Discharge Destination for Patients in Need of Palliative Care in Brazil.

PubMed

Soares, Luiz Guilherme L; Japiassu, André M; Gomes, Lucia C; Pereira, Rogéria

2018-02-01

Patients with complex palliative care needs can experience delayed discharge, which causes an inappropriate occupancy of hospital beds. Post-acute care facilities (PACFs) have emerged as an alternative discharge destination for some of these patients. The aim of this study was to investigate the frequency of admissions and characteristics of palliative care patients discharged from hospitals to a PACF. We conducted a retrospective analysis of PACF admissions between 2014 and 2016 that were linked to hospital discharge reports and electronic health records, to gather information about hospital-to-PACF transitions. In total, 205 consecutive patients were discharged from 6 different hospitals to our PACF. Palliative care patients were involved in 32% (n = 67) of these discharges. The most common conditions were terminal cancer (n = 42, 63%), advanced dementia (n = 17, 25%), and stroke (n = 5, 8%). During acute hospital stays, patients with cancer had significant shorter lengths of stay (13 vs 99 days, P = .004), a lower use of intensive care services (2% vs 64%, P < .001) and mechanical ventilation (2% vs 40%, P < .001), when compared to noncancer patients. Approximately one-third of discharges from hospitals to a PACF involved a heterogeneous group of patients in need of palliative care. Further studies are necessary to understand the trajectory of posthospitalized patients with life-limiting illnesses and what factors influence their decision to choose a PACF as a discharge destination and place of death. We advocate that palliative care should be integrated into the portfolio of post-acute services.
Multi-destination trip patterns

Treesearch

Susan I. Stewart; Christine A. Vogt

1996-01-01

In a 1993 article in Annals, Leu, Crompton, and Fesenmaier (LCF) presented a model of multi-destination pleasure trips. In the article, they question the practice of modeling pleasure trips as single destination trips, and put forward conceptual arguments suggesting that most trips "are not simple origin-destination trips: (1993:291) but...
Using business intelligence for efficient inter-facility patient transfer.

PubMed

Haque, Waqar; Derksen, Beth Ann; Calado, Devin; Foster, Lee

2015-01-01

In the context of inter-facility patient transfer, a transfer operator must be able to objectively identify a destination which meets the needs of a patient, while keeping in mind each facility's limitations. We propose a solution which uses Business Intelligence (BI) techniques to analyze data related to healthcare infrastructure and services, and provides a web based system to identify optimal destination(s). The proposed inter-facility transfer system uses a single data warehouse with an Online Analytical Processing (OLAP) cube built on top that supplies analytical data to multiple reports embedded in web pages. The data visualization tool includes map based navigation of the health authority as well as an interactive filtering mechanism which finds facilities meeting the selected criteria. The data visualization is backed by an intuitive data entry web form which safely constrains the data, ensuring consistency and a single version of truth. The overall time required to identify the destination for inter-facility transfers is reduced from hours to a few minutes with this interactive solution.
Designing Facilities for Collaborative Operations

NASA Technical Reports Server (NTRS)

Norris, Jeffrey; Powell, Mark; Backes, Paul; Steinke, Robert; Tso, Kam; Wales, Roxana

2003-01-01

A methodology for designing operational facilities for collaboration by multiple experts has begun to take shape as an outgrowth of a project to design such facilities for scientific operations of the planned 2003 Mars Exploration Rover (MER) mission. The methodology could also be applicable to the design of military "situation rooms" and other facilities for terrestrial missions. It was recognized in this project that modern mission operations depend heavily upon the collaborative use of computers. It was further recognized that tests have shown that layout of a facility exerts a dramatic effect on the efficiency and endurance of the operations staff. The facility designs (for example, see figure) and the methodology developed during the project reflect this recognition. One element of the methodology is a metric, called effective capacity, that was created for use in evaluating proposed MER operational facilities and may also be useful for evaluating other collaboration spaces, including meeting rooms and military situation rooms. The effective capacity of a facility is defined as the number of people in the facility who can be meaningfully engaged in its operations. A person is considered to be meaningfully engaged if the person can (1) see, hear, and communicate with everyone else present; (2) see the material under discussion (typically data on a piece of paper, computer monitor, or projection screen); and (3) provide input to the product under development by the group. The effective capacity of a facility is less than the number of people that can physically fit in the facility. For example, a typical office that contains a desktop computer has an effective capacity of .4, while a small conference room that contains a projection screen has an effective capacity of around 10. Little or no benefit would be derived from allowing the number of persons in an operational facility to exceed its effective capacity: At best, the operations staff would be underutilized
Mars mission science operations facilities design

NASA Technical Reports Server (NTRS)

Norris, Jeffrey S.; Wales, Roxana; Powell, Mark W.; Backes, Paul G.; Steinke, Robert C.

2002-01-01

A variety of designs for Mars rover and lander science operations centers are discussed in this paper, beginning with a brief description of the Pathfinder science operations facility and its strengths and limitations. Particular attention is then paid to lessons learned in the design and use of operations facilities for a series of mission-like field tests of the FIDO prototype Mars rover. These lessons are then applied to a proposed science operations facilities design for the 2003 Mars Exploration Rover (MER) mission. Issues discussed include equipment selection, facilities layout, collaborative interfaces, scalability, and dual-purpose environments. The paper concludes with a discussion of advanced concepts for future mission operations centers, including collaborative immersive interfaces and distributed operations. This paper's intended audience includes operations facility and situation room designers and the users of these environments.

Devices as destination therapy.

PubMed

Kukuy, Eugene L; Oz, Mehmet C; Rose, Eric A; Naka, Yoshifumi

2003-02-01

The use of circulatory support as destination therapy has been a goal for the treatment of endstage heart failure for several decades. Current investigations are evaluating several circulatory pumps with that particular objective. With continued modification of design, the current and future pumps will become more reliable and provide improved quality of life to patients in need of mechanical circulatory assistance. The new pumps on the horizon specifically address reliability, size, and cost, and are based on the centrifugal system. These devices use the Maglev (Magnetic Levitation) concept that allows for frictionless pumping, low thrombogenicity, minimal noise, and increased durability. Further research with this goal in mind and support from the federal government will be the key to the future use of circulatory assistance as destination therapy for heart failure patients. In addition, the cost-effectiveness of these devices will need to be maintained as the technology improves, as in any new technology that confronts a more intuitive option like the native heart.
Laboratory Animal Facilities. Laboratory Design Notes.

ERIC Educational Resources Information Center

Jonas, Albert M.

1965-01-01

Design of laboratory animal facilities must be functional. Accordingly, the designer should be aware of the complex nature of animal research and specifically the type of animal research which will be conducted in a new facility. The building of animal-care facilities in research institutions requires special knowledge in laboratory animal…
40 CFR 60.32c - Designated facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Designated facilities. 60.32c Section 60.32c Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... Solid Waste Landfills § 60.32c Designated facilities. (a) The designated facility to which the...
Destination memory in social interaction: better memory for older than for younger destinations in normal aging?

PubMed

El Haj, Mohamad; Raffard, Stéphane; Fasotti, Luciano; Allain, Philippe

2018-05-01

Destination memory, a memory component allowing the attribution of information to its appropriate receiver (e.g., to whom did I lend my pen?), is compromised in normal aging. The present paper investigated whether older adults might show better memory for older destinations than for younger destinations. This hypothesis is based on empirical research showing better memory for older faces than for younger faces in older adults. Forty-one older adults and 44 younger adults were asked to tell proverbs to older and younger destinations (i.e., coloured faces). On a later recognition test, participants had to decide whether they had previously told some proverb to an older/younger destination or not. Prior to this task, participants reported their frequency of contact with other-age groups. The results showed lower destination memory in older adults than in younger adults. Interestingly, older adults displayed better memory for older than for younger destinations. The opposite pattern was seen in younger adults. The low memory for younger destinations, as observed in older adults, was significantly correlated with limited exposure to younger individuals. These findings suggest that for older adults, the social experience can play a crucial role in the destination memory, at least as far as exposure to other-age groups is concerned.
Exploration Space Suit Architecture and Destination Environmental-Based Technology Development

NASA Technical Reports Server (NTRS)

Hill, Terry R.; Korona, F. Adam; McFarland, Shane

2012-01-01

This paper continues forward where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars [1] left off in the development of a space suit architecture that is modular in design and could be reconfigured prior to launch or during any given mission depending on the tasks or destination. This paper will address the space suit system architecture and technologies required based upon human exploration extravehicular activity (EVA) destinations, and describe how they should evolve to meet the future exploration EVA needs of the US human space flight program.1, 2, 3 In looking forward to future US space exploration to a space suit architecture with maximum reuse of technology and functionality across a range of mission profiles and destinations, a series of exercises and analyses have provided a strong indication that the Constellation Program (CxP) space suit architecture is postured to provide a viable solution for future exploration missions4. The destination environmental analysis presented in this paper demonstrates that the modular architecture approach could provide the lowest mass and mission cost for the protection of the crew given any human mission outside of low-Earth orbit (LEO). Additionally, some of the high-level trades presented here provide a review of the environmental and non-environmental design drivers that will become increasingly important the farther away from Earth humans venture. This paper demonstrates a logical clustering of destination design environments that allows a focused approach to technology prioritization, development, and design that will maximize the return on investment, independent of any particular program, and provide architecture and design solutions for space suit systems in time or ahead of need dates for any particular crewed flight program in the future. The approach to space suit design and interface definition discussion will show how the architecture is very adaptable to programmatic and funding changes with
40 CFR 60.30d - Designated facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Designated facilities. 60.30d Section... Acid Production Units § 60.30d Designated facilities. Sulfuric acid production units. The designated facility to which §§ 60.31d and 60.32d apply is each existing “sulfuric acid production unit” as defined in...
NASA Human Spaceflight Architecture Team Lunar Destination Activities

NASA Technical Reports Server (NTRS)

Connolly, J. F.; Mueller, R. P.; Whitley, R. J.

2012-01-01

NASA's Human Spaceflight Architecture Team (HAT) Lunar Destination Team has been developing a number of "Design Reference Missions" (DRM) to inform exploration architecture development, transportation approaches, and destination elements and operations. There are four destinations being considered in the HAT studies: Cis-Lunar, Lunar, Near Earth Asteroids and Mars. The lunar destination includes all activities that occur on the moon itself, but not low lunar orbit operations or Earth Moon LaGrange points which are the responsibility of the HAT Cis-Lunar Team. This paper will review the various surface DRMs developed as representative scenarios that could occur in a human lunar return. The approaches have been divided into two broad categories: a seven day short stay mission with global capabilities and a longer extended duration stay of 28 days which is limited to the lunar poles as a landing zone. The surface elements, trade studies, traverses, concept of operations and other relevant issues and methodologies will be presented and discussed in the context and framework of the HAT ground rules and assumptions which are constrained by NASA's available transportation systems. An international collaborative effort based on the 2011 Global Exploration Roadmap (GER) will also be examined and evaluated.
[Factors influencing users' destination upon discharge from a geriatric intermediate care facility in an urban area].

PubMed

Ishizaki, T; Kai, I; Hirayama, T

1995-02-01

Geriatric Intermediate Care Facilities (GICF) have been established to help the hospitalized elderly return home. Users of the GICF are elderly persons who do not need hospitalization, but are mentally or physically impaired. To determine what factors influence users' destinations upon discharge from GICF, we analyzed various characteristics such as age, sex, place of residence before admission, length of stay, intellectual impairment, ability to perform activities of daily living (ADL) among users (N = 389) in a GICF in Chiba City. Multiple logistic regression analyses revealed that, compared with the users who were hospitalized, users who were male, admitted for home, stayed for long periods, and had a high ability to perform ADL were more likely to return home. The analyses also revealed that, compared with the users who were institutionalized, users who came from home, stayed for short periods, and had a high ability to perform ADL were more likely to return home. Evaluating a user's physical, mental, and socioeconomical conditions at an early stage of admission to a GICF may allow us to predict whether the user can be successfully discharged to his or her home or will have to remain at the GICF for an extended period.
Destination memory in traumatic brain injuries.

PubMed

Wili Wilu, Amina; Coello, Yann; El Haj, Mohamad

2018-06-01

Destination memory, which is socially driven, refers to the ability to remember to whom one has sent information. Our study investigated destination memory in patients with traumatic brain injuries (TBIs). Patients and control participants were invited to tell proverbs (e.g., "the pen is mightier than the sword") to pictures of celebrities (e.g., Barack Obama). Then they were asked to indicate to which celebrity they had previously told the proverbs. Besides the assessment of destination memory, participants performed a binding task in which they were required to associate letters with their corresponding location. Analysis demonstrated less destination memory and binding in patients with TBIs than in controls. In both populations, significant correlations were observed between destination memory and performances on the binding task. These findings demonstrate difficulty in the ability to attribute information to its appropriate destination in TBI patients, perhaps owing to difficulties in binding separate information together to form a coherent representation of an event in memory.
Facility design, construction, and operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

France has been disposing of low-level radioactive waste (LLW) at the Centre de Stockage de la Manche (CSM) since 1969 and now at the Centre de Stockage de l`Aube (CSA) since 1992. In France, several agencies and companies are involved in the development and implementation of LLW technology. The Commissariat a l`Energie Atomic (CEA), is responsible for research and development of new technologies. The Agence National pour la Gestion des Dechets Radioactifs is the agency responsible for the construction and operation of disposal facilities and for wastes acceptance for these facilities. Compagnie Generale des Matieres Nucleaires provides fuel services, includingmore » uranium enrichment, fuel fabrication, and fuel reprocessing, and is thus one generator of LLW. Societe pour les Techniques Nouvelles is an engineering company responsible for commercializing CEA waste management technology and for engineering and design support for the facilities. Numatec, Inc. is a US company representing these French companies and agencies in the US. In Task 1.1 of Numatec`s contract with Martin Marietta Energy Systems, Numatec provides details on the design, construction and operation of the LLW disposal facilities at CSM and CSA. Lessons learned from operation of CSM and incorporated into the design, construction and operating procedures at CSA are identified and discussed. The process used by the French for identification, selection, and evaluation of disposal technologies is provided. Specifically, the decisionmaking process resulting in the change in disposal facility design for the CSA versus the CSM is discussed. This report provides` all of the basic information in these areas and reflects actual experience to date.« less
Results of the JIMO Follow-on Destinations Parametric Studies

NASA Technical Reports Server (NTRS)

Noca, Muriel A.; Hack, Kurt J.

2005-01-01

NASA's proposed Jupiter Icy Moon Orbiter (JIMO) mission currently in conceptual development is to be the first one of a series of highly capable Nuclear Electric Propulsion (NEP) science driven missions. To understand the implications of a multi-mission capability requirement on the JIMO vehicle and mission, the NASA Prometheus Program initiated a set of parametric high-level studies to be followed by a series of more in-depth studies. The JIMO potential follow-on destinations identified include a Saturn system tour, a Neptune system tour, a Kuiper Belt Objects rendezvous, an Interstellar Precursor mission, a Multiple Asteroid Sample Return and a Comet Sample Return. This paper shows that the baseline JIMO reactor and design envelop can satisfy five out of six of the follow-on destinations. Flight time to these destinations can significantly be reduced by increasing the launch energy or/and by inserting gravity assists to the heliocentric phase.
Dual-Spool Turbine Facility Design Overview

NASA Technical Reports Server (NTRS)

Giel, Paul; Pachlhofer, Pete

2003-01-01

The next generation of aircraft engines, both commercial and military, will attempt to capitalize on the benefits of close-coupled, vaneless, counter-rotating turbine systems. Experience has shown that significant risks and challenges are present with close-coupled systems in terms of efficiency and durability. The UEET program needs to demonstrate aerodynamic loading and efficiency goals for close-coupled, reduced-stage HP/LP turbine systems as a Level 1 Milestone for FY05. No research facility exists in the U.S. to provide risk reduction for successful development of close-coupled, high and low pressure turbine systems for the next generations of engines. To meet these objectives, the design, construction, and integrated systems testing of a Dual-Spool Turbine Facility (DSTF) facility has been initiated at the NASA Glenn Research Center. The facility will be a warm (-IOOO'F), continuous flow facility for overall aerodynamic performance and detailed flow field measurement acquisition. The facility will have state-of-the-art instrumentation to capture flow physics details. Accurate and reliable speed control will be achieved by utilizing the existing Variable Frequency Drive System. Utilization of this and other existing GRC centralized utilities will reduce the overall construction costs. The design allows for future installation of a turbine inlet combustor profile simulator. This presentation details the objectives of the facility and the concepts used in specifying its capabilities. Some preliminary design results will be presented along with a discussion of plans and schedules.
Destination memory for self-generated actions.

PubMed

El Haj, Mohamad

2016-10-01

There is a substantial body of literature showing memory enhancement for self-generated information in normal aging. The present paper investigated this outcome for destination memory or memory for outputted information. In Experiment 1, younger adults and older adults had to place (self-generated actions) and observe an experimenter placing (experiment-generated actions) items into two different destinations (i.e., a black circular box and a white square box). On a subsequent recognition task, the participants had to decide into which box each item had originally been placed. These procedures showed better destination memory for self- than experimenter-generated actions. In Experiment 2, destination and source memory were assessed for self-generated actions. Younger adults and older adults had to place items into the two boxes (self-generated actions), take items out of the boxes (self-generated actions), and observe an experimenter taking items out of the boxes (experiment-generated actions). On a subsequent recognition task, they had to decide into which box (destination memory)/from which box (source memory) each item had originally been placed/taken. For both populations, source memory was better than destination memory for self-generated actions, and both were better than source memory for experimenter-generated actions. Taken together, these findings highlight the beneficial effect of self-generation on destination memory in older adults.
SNL/CA Facilities Management Design Standards Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rabb, David; Clark, Eva

2014-12-01

At Sandia National Laboratories in California (SNL/CA), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/CA applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safetymore » and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule.« less
Regulatory Facility Guide for Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, S.S.; Bock, R.E.; Francis, M.W.

1994-02-28

This guide provides detailed compilations of international, federal, and state transportation related regulations applicable to shipments originating at or destined to Tennessee facilities. Information on preferred routes is also given.
Science Facilities Design Guidelines.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

These guidelines, presented in five chapters, propose a framework to support the planning, designing, constructing, and renovating of school science facilities. Some program issues to be considered in the articulation of a science program include environmental concerns, interdisciplinary approaches, space flexibility, and electronic…
Zeitgeists and development trends in long-term care facility design.

PubMed

Wang, Chia-Hui; Kuo, Nai-Wen

2006-06-01

Through literature analysis, in-depth interviews, and the application of the Delphi survey, this study explored long-term care resident priorities with regard to long-term care facility design in terms of both physical and psychological needs. This study further clarified changing trends in long-term care concepts; illustrated the impact that such changes are having on long-term care facility design; and summarized zeitgeists related to the architectural design of long-term care facilities. Results of our Delphi survey indicated the following top five priorities in long-term care facility design: (1) creating a home-like feeling; (2) adhering to Universal Design concepts; (3) providing well-defined private sleeping areas; (4) providing adequate social space; and (5) decentralizing residents' rooms into clusters. The three major zeitgeists related to long-term care facility design include: (1) modern long-term care facilities should abandon their traditional "hospital" image and gradually reposition facilities into homelike settings; (2) institution-based care for the elderly should be de-institutionalized under the concept of aging-in-place; and (3) living clusters, rather than traditional hospital-like wards, should be designed into long-term care facilities.
Lunar base launch and landing facilities conceptual design

NASA Technical Reports Server (NTRS)

Phillips, Paul G.; Simonds, Charles H.; Stump, William R.

1992-01-01

The purpose of this study was to perform a first look at the requirements for launch and landing facilities for early lunar bases and to prepared conceptual designs for some of these facilities. The emphasis of the study is on the facilities needed from the first manned landing until permanent occupancy, the Phase 2 lunar base. Factors including surface characteristics, navigation system, engine blast effects, and expected surface operations are used to develop landing pad designs, and definitions fo various other elements of the launch and landing facilities. Finally, the dependence of the use of these elements and the evolution of the facilities are established.
The interaction of facility design with management goals.

PubMed

Lindeman, W E

1991-01-01

While medical groups have different goals based on their mission, size and market, they all seek to propagate and maintain a financially sound enterprise. Author William Lindeman, AIA, writes that a primary factor in achieving this goal is excellent facility design. While facility design is no guarantee for success, exceptionally poor design can make success all but impossible.
Design of Aircraft Deicing Facilities

DOT National Transportation Integrated Search

1993-08-23

Archival copy of original Federal Aviation Administration standards and : specifications for use in the design of aircraft deicing facilities. To ensure : review of all changes, user should consult . ...

JPL Facilities and Software for Collaborative Design: 1994 - Present

NASA Technical Reports Server (NTRS)

DeFlorio, Paul A.

2004-01-01

The viewgraph presentation provides an overview of the history of the JPL Project Design Center (PDC) and, since 2000, the Center for Space Mission Architecture and Design (CSMAD). The discussion includes PDC objectives and scope; mission design metrics; distributed design; a software architecture timeline; facility design principles; optimized design for group work; CSMAD plan view, facility design, and infrastructure; and distributed collaboration tools.
Design Standards for School Art Facilities

ERIC Educational Resources Information Center

National Art Education Association, 2015

2015-01-01

"Design Standards for School Art Facilities" is an invaluable resource for any school or school district looking to build new facilities for the visual arts or renovate existing ones. Discover detailed information about spaces for the breadth of media used in the visual arts. Photographs illustrate all types of features including…
Ultraviolet Free Electron Laser Facility preliminary design report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ben-Zvi, I.

1993-02-01

This document, the Preliminary Design Report (PDR) for the Brookhaven Ultraviolet Free Electron Laser (UV FEL) facility, describes all the elements of a facility proposed to meet the needs of a research community which requires ultraviolet sources not currently available as laboratory based lasers. Further, for these experiments, the requisite properties are not extant in either the existing second or upcoming third generation synchrotron light sources. This document is the result of our effort at BNL to identify potential users, determine the requirements of their experiments, and to design a facility which can not only satisfy the existing need, butmore » have adequate flexibility for possible future extensions as need dictates and as evolving technology allows. The PDR is comprised of three volumes. In this, the first volume, background for the development of the proposal is given, including descriptions of the UV FEL facility, and representative examples of the science it was designed to perform. Discussion of the limitations and potential directions for growth are also included. A detailed description of the facility design is then provided, which addresses the accelerator, optical, and experimental systems. Information regarding the conventional construction for the facility is contained in an addendum to volume one (IA).« less
Facilities for music education and their acoustical design.

PubMed

Koskinen, Heli; Toppila, Esko; Olkinuora, Pekka

2010-01-01

Good rehearsal facilities for musicians are essential. Directive 2003/10/EC necessitates that musicians are protected from noise exposure. A code of conduct gives the guidelines how this should be done. This study examines room acoustics recommendations provided by the Finnish code of conduct, and discusses whether they are adequate. Small teaching facilities were measured after renovation and compared to earlier measurements. Teachers' opinions were inquired about the facilities before and after. The renovation did not decrease the noise exposure of the teachers. However, the majority preferred the facilities after the renovation. The Finnish code of conduct is not sufficient for facilities where loud instruments are played, or band practise. Good facilities can be designed but they must be specified at the designing stage for their intended use.
FAST FLUX TEST FACILITY CONCEPTUAL FACILTY DESIGN DESCRIPTION FOR THE INERT GAS CELL EXAMINATION FACILITY NO. 71

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1968-12-12

The purpose of this Conceptual Facility Design Description (CFDD) is to provide a technical description of the Inert Gas Cell Examination Facility such that agreement with RDT on a Conceptual Design can be reached . The CFDD also serves to establish a common understanding of the facility concept among all responsible FFTF Project parties including the Architect Engineer and Reactor Designer. Included are functions and design requirements, a physical description of the facility, safety considerations, principles of operation, and maintenance principles.
The Influence of Building Codes on Recreation Facility Design.

ERIC Educational Resources Information Center

Morrison, Thomas A.

1989-01-01

Implications of building codes upon design and construction of recreation facilities are investigated (national building codes, recreation facility standards, and misperceptions of design requirements). Recreation professionals can influence architectural designers to correct past deficiencies, but they must understand architectural and…
14 CFR 19-7 - Passenger origin-destination survey.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Passenger origin-destination survey. Sec... AIR CARRIERS Operating Statistics Classifications Sec. 19-7 Passenger origin-destination survey. (a... carriers) shall participate in a Passenger Origin-Destination (O & D) Survey covering domestic and...
Modern tornado design of nuclear and other potentially hazardous facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevenson, J.D.; Zhao, Y.

Tornado wind loads and other tornado phenomena, including tornado missiles and differential pressure effects, have not usually been considered in the design of conventional industrial, commercial, or residential facilities in the United States; however, tornado resistance has often become a design requirement for certain hazardous facilities, such as large nuclear power plants and nuclear materials and waste storage facilities, as well as large liquefied natural gas storage facilities. This article provides a review of current procedures for the design of hazardous industrial facilities to resist tornado effects. 23 refs., 19 figs., 13 tabs.
10 CFR 110.29 - Restricted destinations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Restricted destinations. 110.29 Section 110.29 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.29 Restricted destinations. Afghanistan Andorra Angola Burma (Myanmar) Djibouti India Israel Libya...
Education Destination Determinants of Chinese Students

ERIC Educational Resources Information Center

He, Yunke; Banham, Heather

2011-01-01

As the focus on international education has changed from international aid to international trade, competition for internationally mobile students has increased. The motivational factors influencing the education destination decision for students from China is of particular significance to destination countries and their educational institutions.…
10 CFR 110.29 - Restricted destinations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Restricted destinations. 110.29 Section 110.29 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.29 Restricted destinations. Afghanistan Andorra Angola Burma (Myanmar) Djibouti India Israel Libya...
10 CFR 110.29 - Restricted destinations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Restricted destinations. 110.29 Section 110.29 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.29 Restricted destinations. Afghanistan Andorra Angola Burma (Myanmar) Djibouti India Israel Libya...
10 CFR 110.29 - Restricted destinations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Restricted destinations. 110.29 Section 110.29 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.29 Restricted destinations. Afghanistan Andorra Angola Burma (Myanmar) Djibouti India Israel Libya...
10 CFR 110.29 - Restricted destinations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Restricted destinations. 110.29 Section 110.29 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.29 Restricted destinations. Afghanistan Andorra Angola Burma (Myanmar) Djibouti India Israel Libya...
48 CFR 52.247-34 - F.o.b. Destination.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false F.o.b. Destination. 52.247....o.b. Destination. As prescribed in 47.303-6(c), insert the following clause: F.o.b. Destination (JAN 1991) (a) The term f.o.b. destination, as used in this clause, means— (1) Free of expense to the...
Design & layout of recreation facilities

Treesearch

Howard R. Orr

1971-01-01

Design and layout of recreation facilities is a problem solving process that must be divorced from the emotionalism that has shrouded outdoor recreation and must deal deliberately with the growing information concerning people and natural resources.
Regulatory facility guide for Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, S.S.; Bock, R.E.; Francis, M.W.

1994-02-28

The Regulatory Facility Guide (RFG) has been developed for the DOE and contractor facilities located in the state of Ohio. It provides detailed compilations of international, federal, and state transportation-related regulations applicable to shipments originating at destined to Ohio facilities. This RFG was developed as an additional resource tool for use both by traffic managers who must ensure that transportation operations are in full compliance with all applicable regulatory requirements and by oversight personnel who must verify compliance activities.
Production Facility SCADA Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dale, Gregory E.; Holloway, Michael Andrew; Baily, Scott A.

2015-03-23

The following report covers FY 14 activities to develop supervisory control and data acquisition (SCADA) system for the Northstar Moly99 production facility. The goal of this effort is to provide Northstar with a baseline system design.
Conceptual design of the MHD Engineering Test Facility

NASA Technical Reports Server (NTRS)

Bents, D. J.; Bercaw, R. W.; Burkhart, J. A.; Mroz, T. S.; Rigo, H. S.; Pearson, C. V.; Warinner, D. K.; Hatch, A. M.; Borden, M.; Giza, D. A.

1981-01-01

The reference conceptual design of the MHD engineering test facility, a prototype 200 MWe coal-fired electric generating plant designed to demonstrate the commerical feasibility of open cycle MHD is summarized. Main elements of the design are identified and explained, and the rationale behind them is reviewed. Major systems and plant facilities are listed and discussed. Construction cost and schedule estimates are included and the engineering issues that should be reexamined are identified.
Preliminary design for a maglev development facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coffey, H.T.; He, J.L.; Chang, S.L.

1992-04-01

A preliminary design was made of a national user facility for evaluating magnetic-levitation (maglev) technologies in sizes intermediate between laboratory experiments and full-scale systems. A technical advisory committee was established and a conference was held to obtain advice on the potential requirements of operational systems and how the facility might best be configured to test these requirements. The effort included studies of multiple concepts for levitating, guiding, and propelling maglev vehicles, as well as the controls, communications, and data-acquisition and -reduction equipment that would be required in operating the facility. Preliminary designs for versatile, dual 2-MVA power supplies capable ofmore » powering attractive or repulsive systems were developed. Facility site requirements were identified. Test vehicles would be about 7.4 m (25 ft) long, would weigh form 3 to 7 metric tons, and would operate at speeds up to 67 m/s (150 mph) on a 3.3-km (2.05-mi) elevated guideway. The facility would utilize modular vehicles and guideways, permitting the substitution of levitation, propulsion, and guideway components of different designs and materials for evaluation. The vehicle would provide a test cell in which individual suspension or propulsion components or subsystems could be tested under realistic conditions. The system would allow economical evaluation of integrated systems under varying weather conditions and in realistic geometries.« less

Destination Memory in Korsakoff's Syndrome.

PubMed

El Haj, Mohamad; Kessels, Roy P C; Matton, Christian; Bacquet, Jean-Eudes; Urso, Laurent; Cool, Gaëlle; Guidez, Florence; Potier, Stéphanie; Nandrino, Jean-Louis; Antoine, Pascal

2016-06-01

Context memory, or the ability to remember the context in which an episodic event has occurred (e.g., where and when an event took place), has been found to be compromised in Korsakoff's syndrome. This study examined whether a similar deficit would be observed for destination memory, that is, the ability to remember to whom an information was previously transmitted. Patients with Korsakoff's syndrome and healthy controls were instructed to tell proverbs to pictures of celebrities. In a subsequent recognition test, they had to indicate to which celebrity they had previously told the proverbs. Participants also completed a neuropsychological battery including a binding task in which they were required to associate letters with their correspondent locations to assess context memory. Results showed worse binding and destination memory in patients with Korsakoff's syndrome than in controls. In the Korsakoff group, destination memory was significantly correlated with and predicted by performances on the binding task. The binding process seems to be impaired in Korsakoff's syndrome, a deficit that may account for the destination memory compromise in the syndrome, and probably, for the difficulty to retrieve the "where and when" of an encountered event. Copyright © 2016 by the Research Society on Alcoholism.
Source and destination memory: two sides of the same coin?

PubMed

Lindner, Isabel; Drouin, Héloïse; Tanguay, Annick F N; Stamenova, Vessela; Davidson, Patrick S R

2015-01-01

Whereas source memory involves remembering from whom you have heard something, destination memory involves remembering to whom you have told something. Despite its practical relevance, destination memory has been studied little. Recently, two reports suggested that generally destination memory should be poorer than source memory, and that it should be particularly difficult for older people. We tested these predictions by having young and older participants read sentences to two examiners (destination encoding) and listen to sentences read by two examiners (source encoding), under intentional (Experiment 1) or incidental encoding (Experiments 2 and 3). Only in Experiment 3 (in which cognitive demands during destination encoding were increased) was destination memory significantly poorer than source memory. In none of the experiments were older adults inferior to the young on destination or source memory. Destination- and source-memory scores were significantly correlated. Item memory was consistently superior for sentences that had been read out loud (during destination encoding) versus those that had been heard (during source encoding). Destination memory needs not always be poorer than source memory, appears not to be particularly impaired by normal ageing and may depend on similar processes to those supporting source memory.
10 CFR 110.28 - Embargoed destinations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Embargoed destinations. 110.28 Section 110.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.28 Embargoed destinations. Cuba Iran Iraq North Korea Syria Sudan [58 FR 13003, Mar. 9, 1993, as...
10 CFR 110.28 - Embargoed destinations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Embargoed destinations. 110.28 Section 110.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.28 Embargoed destinations. Cuba Iran Iraq North Korea Syria Sudan [58 FR 13003, Mar. 9, 1993, as...
10 CFR 110.28 - Embargoed destinations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Embargoed destinations. 110.28 Section 110.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.28 Embargoed destinations. Cuba Iran Iraq North Korea Syria Sudan [58 FR 13003, Mar. 9, 1993, as...
10 CFR 110.28 - Embargoed destinations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Embargoed destinations. 110.28 Section 110.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.28 Embargoed destinations. Cuba Iran Iraq North Korea Syria Sudan [58 FR 13003, Mar. 9, 1993, as...
10 CFR 110.28 - Embargoed destinations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Embargoed destinations. 110.28 Section 110.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) EXPORT AND IMPORT OF NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.28 Embargoed destinations. Cuba Iran Iraq North Korea Syria Sudan [58 FR 13003, Mar. 9, 1993, as...
Preliminary design study for an atomospheric science facility

NASA Technical Reports Server (NTRS)

Hutchison, R.

1972-01-01

The activities and results of the Atmospheric Science Facility preliminary design study are reported. The objectives of the study were to define the scientific goals, to determine the range of experiment types, and to develop the preliminary instrument design requirements for a reusable, general purpose, optical research facility for investigating the earth's atmosphere from a space shuttle orbital vehicle.
Portfolio analysis of a destination's tourism "product line"

Treesearch

Harold Daniel

2007-01-01

If we think of a tourist destination as a platform from which a variety of tourist experiences can be delivered, we could conceptualize these experiences as the "product line" offered by or associated with the tourist destination. That conceptualization enables the manager of the destination to employ the logic and discipline associated with product line...
Walking for transportation in Hong Kong Chinese urban elders: a cross-sectional study on what destinations matter and when.

PubMed

Cerin, Ester; Lee, Ka-yiu; Barnett, Anthony; Sit, Cindy H P; Cheung, Man-chin; Chan, Wai-man; Johnston, Janice M

2013-06-20

for the relationships of within-neighborhood walking for transport with diversity of recreational and entertainment destinations. Pedestrian-infrastructure attributes acted as moderators of associations of within-neighborhood walking for transport with prevalence of commercial destination categories. Composite destinations indices consisting of destination categories related to the specific measures of walking were positively associated with walking for transport. The availability of both non-commercial and commercial destinations may promote within-neighborhood walking for transport, while recreational facilities and public transit points may facilitate overall walking for transport. However, destination-rich areas need to also provide adequate levels of personal safety and a physically-unchallenging pedestrian network.
Radiation shielding design of a new tomotherapy facility.

PubMed

Zacarias, Albert; Balog, John; Mills, Michael

2006-10-01

It is expected that intensity modulated radiation therapy (IMRT) and image guided radiation therapy (IGRT) will replace a large portion of radiation therapy treatments currently performed with conventional MLC-based 3D conformal techniques. IGRT may become the standard of treatment in the future for prostate and head and neck cancer. Many established facilities may convert existing vaults to perform this treatment method using new or upgraded equipment. In the future, more facilities undoubtedly will be considering de novo designs for their treatment vaults. A reevaluation of the design principles used in conventional vault design is of benefit to those considering this approach with a new tomotherapy facility. This is made more imperative as the design of the TomoTherapy system is unique in several aspects and does not fit well into the formalism of NCRP 49 for a conventional linear accelerator.
46 CFR 162.050-15 - Designation of facilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... This is the mean and standard deviation, respectively, of the differences between the known sample... sample analysis, and the materials necessary to perform the tests; (2) Each facility test rig must be of... facilities. (a) Each request for designation as a facility authorized to perform approval tests must be...
Secret Destinations

ERIC Educational Resources Information Center

Buss, David

2008-01-01

"All journeys have secret destinations of which the traveller is unaware" (Martin Buber). All learning results in learning outcomes of some form, planned or otherwise, but the term is now widely used to refer only to those learning outcomes that predetermine what those outcomes will be--the "intended" or "specified" learning outcomes of the…
The New Destination Disadvantage: Disparities in Hispanic Health Insurance Coverage Rates in Metropolitan and Nonmetropolitan New and Established Destinations

PubMed Central

Monnat, Shannon M.

2016-01-01

Hispanics have the lowest health insurance rates of any racial/ethnic group, but rates vary significantly across the U.S. The unprecedented growth of the Hispanic population since 1990 in rural areas with previously small or non-existent Hispanic populations raises questions about disparities in access to health insurance coverage. Identifying spatial disparities in Hispanic health insurance rates can illuminate the specific contexts within which Hispanics are least likely to have health care access and inform policy approaches for increasing coverage in different spatial contexts. Using county-level data from the 2009/2013 American Community Survey, I find that early new destinations (i.e., those that experienced rapid Hispanic population growth during the 1990s) have the lowest Hispanic adult health insurance coverage rates, with little variation by metropolitan status. Conversely, among the most recent new destinations that experienced significant Hispanic population growth during the 2000s, metropolitan counties have Hispanic health insurance rates that are similar to established destinations, but rural counties have Hispanic health insurance rates that are significantly lower than those in established destinations. Findings demonstrate that the new destination disadvantage is driven entirely by higher concentrations of immigrant non-citizen Hispanics in these counties, but labor market conditions were salient drivers of the spatially uneven distribution of foreign-born non-citizen Hispanics to new destinations, particularly in rural areas. PMID:28479612
Does Non-Compliance with Route/Destination Assignment Compromise Evacuation Efficiency?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuan, Fang; Han, Lee; Chin, Shih-Miao

2007-01-01

This paper documents studies of two real-world network evacuation cases, each with a different, but proven, simulation software package. The purpose of these studies was to examine whether the rate of evacuees' compliance with predetermined route/destination assignments would have an impact on the efficiency of evacuation operations. Results from both cases suggest that a rate of less than 100% compliance does not compromise evacuation efficiency. In fact, although this is counter-intuitive, evacuation efficiency would actually improve as a result of "sensible" non-compliance on the part of the evacuees. A closer observation of the results revealed that the somewhat unexpected improvementmore » results from a reduction in congestion along designated evacuation routes as evacuees spread out to less prominent parallel streets and other non-congested outbound routes. This suggests that by being limited by the zone-to-zone and one-to-one assignment framework, conventional evacuation plans may have fallen short of providing the most efficient guidance to evacuees. To address this issue, some systematic means, perhaps simulation-based, should be performed to assess the zone partitions, route designations, and destination assignments in existing evacuation plans. Thus, evacuation planning with route/destination assignments based on origin zones may be flawed and may deserve reconsideration. After all, once en route, where an evacuee is coming from is of far less consequence than where he or she is going.« less
POWER-BURST FACILITY (PBF) CONCEPTUAL DESIGN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wasserman, A.A.; Johnson, S.O.; Heffner, R.E.

1963-06-21

A description is presented of the conceptual design of a high- performance, pulsed reactor called the Power Burst Facility (PBF). This reactor is designed to generate power bursts with initial asymptotic periods as short as 1 msec, producing energy releases large enough to destroy entire fuel subassemblies placed in a capsule or flow loop mounted in the reactor, all without damage to the reactor itself. It will be used primarily to evaluate the consequences and hazards of very rapid destructive accidents in reactors representing the entire range of current nuclear technology as applied to power generation, propulsion, and testing. Itmore » will also be used to carry out detailed studies of nondestructive reactivity feedback mechanisms in the shortperiod domain. The facility was designed to be sufficiently flexible to accommodate future cores of even more advanced design. The design for the first reactor core is based upon proven technology; hence, completion of the final design of this core will involve no significant development delays. Construction of the PBF is proposed to begin in September 1984, and is expected to take approximately 20 months to complete. (auth)« less
Destination Memory and Cognitive Theory of Mind in Alzheimer's Disease.

PubMed

El Haj, Mohamad; Gély-Nargeot, Marie-Christine; Raffard, Stéphane

2015-01-01

Destination memory, or the ability to remember the destination to whom a piece of information was addressed, is found to be compromised in Alzheimer's disease (AD). Our paper investigated the relationship between destination memory and theory of mind in AD since both destination memory and theory of mind are social abilities that require processing attributes of interlocutors. Mild AD participants and controls were administered tasks tapping destination memory, affective theory of mind, and 1st and 2nd order cognitive theory of mind. Relative to controls, AD participants showed compromise in destination memory and 2nd order cognitive theory of mind, but preserved performance on affective and 1st order cognitive theory of mind. Significant correlations were observed between destination memory, and 1st and 2nd order cognitive theory of mind in AD participants and controls. By demonstrating a relationship between compromises in 2nd order theory of mind and in destination memory, our work highlights links between social cognition and memory functioning in AD.
Final Design Report for the RH LLW Disposal Facility (RDF) Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Austad, Stephanie Lee

2015-09-01

The RH LLW Disposal Facility (RDF) Project was designed by AREVA Federal Services (AFS) and the design process was managed by Battelle Energy Alliance (BEA) for the Department of Energy (DOE). The final design report for the RH LLW Disposal Facility Project is a compilation of the documents and deliverables included in the facility final design.
Final Design Report for the RH LLW Disposal Facility (RDF) Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Austad, S. L.

2015-05-01

The RH LLW Disposal Facility (RDF) Project was designed by AREVA Federal Services (AFS) and the design process was managed by Battelle Energy Alliance (BEA) for the Department of Energy (DOE). The final design report for the RH LLW Disposal Facility Project is a compilation of the documents and deliverables included in the facility final design.
Acoustical Design of Music Education Facilities.

ERIC Educational Resources Information Center

McCue, Edward, Ed.; Talaske, Richard H., Ed.

This publication provides essays on the acoustical design of music education facilities and reproductions of posters describing 50 projects presented at the 117th Meeting of the Acoustical Society of American held in Syracuse, New York in May 1989. Essays are as follows: "Introduction to the Design Process" (Richard Talaske); "The…

Destination Memory Impairment in Older People

PubMed Central

Gopie, Nigel; Craik, Fergus I. M.; Hasher, Lynn

2012-01-01

Older adults are assumed to have poor destination memory— knowing to whom they tell particular information—and anecdotes about them repeating stories to the same people are cited as informal evidence for this claim. Experiment 1 assessed young and older adults’ destination memory by having participants tell facts (e.g., “A dime has 118 ridges around its edge”) to pictures of famous people (e.g., Oprah Winfrey). Surprise recognition memory tests, which also assessed confidence, revealed that older adults, compared to young adults, were disproportionately impaired on destination memory relative to spared memory for the individual components (i.e., facts, faces) of the episode. Older adults also were more confident that they had not told a fact to a particular person when they actually had (i.e., a miss); this presumably causes them to repeat information more often than young adults. When the direction of information transfer was reversed in Experiment 2, such that the famous people shared information with the participants (i.e., a source memory experiment), age-related memory differences disappeared. In contrast to the destination memory experiment, older adults in the source memory experiment were more confident than young adults that someone had shared a fact with them when a different person actually had shared the fact (i.e., a false alarm). Overall, accuracy and confidence jointly influence age-related changes to destination memory, a fundamental component of successful communication. PMID:20718537
Destination memory impairment in older people.

PubMed

Gopie, Nigel; Craik, Fergus I M; Hasher, Lynn

2010-12-01

Older adults are assumed to have poor destination memory-knowing to whom they tell particular information-and anecdotes about them repeating stories to the same people are cited as informal evidence for this claim. Experiment 1 assessed young and older adults' destination memory by having participants tell facts (e.g., "A dime has 118 ridges around its edge") to pictures of famous people (e.g., Oprah Winfrey). Surprise recognition memory tests, which also assessed confidence, revealed that older adults, compared to young adults, were disproportionately impaired on destination memory relative to spared memory for the individual components (i.e., facts, faces) of the episode. Older adults also were more confident that they had not told a fact to a particular person when they actually had (i.e., a miss); this presumably causes them to repeat information more often than young adults. When the direction of information transfer was reversed in Experiment 2, such that the famous people shared information with the participants (i.e., a source memory experiment), age-related memory differences disappeared. In contrast to the destination memory experiment, older adults in the source memory experiment were more confident than young adults that someone had shared a fact with them when a different person actually had shared the fact (i.e., a false alarm). Overall, accuracy and confidence jointly influence age-related changes to destination memory, a fundamental component of successful communication. (c) 2010 APA, all rights reserved).
Investigating walking environments in and around assisted living facilities: a facility visit study.

PubMed

Lu, Zhipeng

2010-01-01

This study explores assisted living residents' walking behaviors, locations where residents prefer to walk, and walking environments in and around assisted living facilities. Regular walking is beneficial to older adults' physical and psychological health. Yet frail older residents in assisted living are usually too sedentary to achieve these benefits. The physical environment plays an important role in promoting physical activity. However, there is little research exploring this relationship in assisted living settings. The researcher visited 34 assisted living facilities in a major Texas city. Methods included walk-through observation with the Assisted Living Facility Walking Environment Checklist, and interviews with administrators by open- and close-ended questions. The data from 26 facilities were analyzed using descriptive statistics (for quantitative data) and content analysis (for qualitative data). The results indicate that (a) residents were walking both indoors and outdoors for exercise or other purposes (e.g., going to destinations); (b) assisted living facility planning and design details-such as neighborhood sidewalk conditions, facility site selection, availability of seating, walking path configuration (e.g., looped/nonlooped path), amount of shading along the path, presence of handrails, existence of signage, etc.-may influence residents' walking behaviors; and (c) current assisted living facilities need improvement in all aspects to make their environments more walkable for residents. Findings of the study provide recommendations for assisted living facilities to improve the walkability of environments and to create environmental interventions to promote regular walking among their residents. This study also implies several directions for future research.
Lessons learned: clinicians' post-occupancy perspective of facility design involvement.

PubMed

Reno, Kathy; Okland, Kathy; Finis, Nanne; Lamantia, Gina; Call, Roger; Cardon, Kerrie; Gerber, Deborah; Zeigler, Janet

2014-01-01

The research was conducted to determine clinician knowledge needs for competent involvement with the facility design process as well as to gather lessons learned on building stronger design teams. As clinical stakeholders are invited to the healthcare facility design table, the question arises as to the ability of professionally diverse team members to translate each other's comments and ideas accurately. In the past, hospitals were designed by a handful of hospital leaders and architects. More recently, multiple players have become involved throughout the design and construction of new healthcare facilities. Clinical consultants from two international healthcare companies observed that many clinicians were unprepared to effectively translate their needs to the architectural community or to competently utilize architectural tools and documents. A qualitative, post-occupancy cross-case study was conducted to understand how clinicians could increase their competencies for successful involvement in facility design. Focus group interviews were held with teams from healthcare facilities occupying their new facility for more than 6 months and less than 2 years. Curriculum topics were validated and additional areas recommended based on the interviews. Open-ended questioins on lessons learned provided several new dimensions to the research. Although validating the curriculum was the initial intent, the feedback from the focus groups on lessons learned provided rich concepts for practice implications and further research on post-occupancy. Decision-making, design process, interdisciplinary, planning, post-occupancy.
Lunar base launch and landing facility conceptual design, 2nd edition

NASA Technical Reports Server (NTRS)

1988-01-01

This report documents the Lunar Base Launch and Landing Facility Conceptual Design study. The purpose of this study was to examine the requirements for launch and landing facilities for early lunar bases and to prepare conceptual designs for some of these facilities. The emphasis of this study is on the facilities needed from the first manned landing until permanent occupancy. Surface characteristics and flight vehicle interactions are described, and various facility operations are related. Specific recommendations for equipment, facilities, and evolutionary planning are made, and effects of different aspects of lunar development scenarios on facilities and operations are detailed. Finally, for a given scenario, a specific conceptual design is developed and presented.
Interior Design Factors in Library Facilities.

ERIC Educational Resources Information Center

Jackson, Patricia Ann

When planning the interior of a library facility, the planning team of librarian, library consultant, architect, and interior design consultant must focus attention on the basic principles of interior design and the psychological needs of the user. Colors for an interior should be selected with careful regard to space, light, and emotional and…
14 CFR Sec. 19-7 - Passenger origin-destination survey.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Passenger origin-destination survey. Sec... AIR CARRIERS Operating Statistics Classifications Sec. 19-7 Passenger origin-destination survey. (a... carriers) shall participate in a Passenger Origin-Destination (O & D) Survey covering domestic and...
14 CFR Sec. 19-7 - Passenger origin-destination survey.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Passenger origin-destination survey. Sec... AIR CARRIERS Operating Statistics Classifications Sec. 19-7 Passenger origin-destination survey. (a... carriers) shall participate in a Passenger Origin-Destination (O & D) Survey covering domestic and...
Apprentice and Trainee Destinations 2010: Technical Notes. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

"Apprentice and Trainee Destinations" presents information about the destinations of apprentices and trainees approximately nine months after leaving their training. Information in this publication is derived from the Apprentice and Trainee Destinations Survey that covered apprentices and trainees who, between April and June 2009, either…
Energy-Efficient Design for Florida Educational Facilities.

ERIC Educational Resources Information Center

Florida Solar Energy Center, Cape Canaveral.

This manual provides a detailed simulation analysis of a variety of energy conservation measures (ECMs) with the intent of giving educational facility design teams in Florida a basis for decision making. The manual's three sections cover energy efficiency design considerations that appear throughout the following design processes: schematic…
48 CFR 546.302-72 - Destination inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Destination inspection. 546.302-72 Section 546.302-72 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 546.302-72 Destination inspection. The contracting...
Designing for Education: Compendium of Exemplary Educational Facilities 2011

ERIC Educational Resources Information Center

OECD Publishing (NJ3), 2011

2011-01-01

"Designing for Education: Compendium of Exemplary Educational Facilities 2011" showcases over 60 recently built or refurbished educational facilities from 28 countries. Collectively, these projects demonstrate state-of-the-art design in this field and each one is lavishly illustrated with colour photos, plans and descriptions. [A free PDF is…
Destination Mars Grand Opening

NASA Image and Video Library

2016-09-18

Apollo 11 astronaut Buzz Aldrin, left and Erisa Hines of NASA’s Jet Propulsion Laboratory (JPL) in Pasadena, California, try out Microsoft HoloLens mixed reality headset during a preview of the new Destination: Mars experience at the Kennedy Space Center Visitor Complex. Destination: Mars gives guests an opportunity to “visit” several sites on Mars using real imagery from NASA’s Curiosity Mars Rover. Based on OnSight, a tool created by NASA’s Jet Propulsion Laboratory in Pasadena, California, the experience brings guests together with a holographic version of Aldrin and Curiosity rover driver Hines as they are guided to Mars using Microsoft HoloLens mixed reality headset. Photo credit: NASA/Charles Babir
Destination Mars Grand Opening

NASA Image and Video Library

2016-09-18

A ceremonial ribbon is cut for the opening of new Destination: Mars experience at the Kennedy Space Center Visitor Complex. From the left are Therrin Protze, chief operating officer of the visitor complex, center director Bob Cabana, Apollo 11 astronaut Buzz Aldrin, Kudo Tsunoda of Microsoft, and Jeff Norris of NASA’s Jet Propulsion Laboratory (JPL) in Pasadena, California. Destination: Mars gives guests an opportunity to “visit” several sites on Mars using real imagery from NASA’s Curiosity Mars Rover. Based on OnSight, a tool created by JPL, the experience brings guests together with a holographic version of Aldrin as they are guided to Mars using Microsoft HoloLens mixed reality headset. Photo credit: NASA/Charles Babir
Implications of system usability on intermodal facility design.

DOT National Transportation Integrated Search

2010-08-01

Ensuring good design of intermodal transportation facilities is critical for effective and : satisfactory operation. Passenger use of the facilities is often hindered by inadequate space, a poor : layout, or lack of signage. This project aims to impr...
Walking for transportation in Hong Kong Chinese urban elders: a cross-sectional study on what destinations matter and when

PubMed Central

2013-01-01

-related attributes were observed for the relationships of within-neighborhood walking for transport with diversity of recreational and entertainment destinations. Pedestrian-infrastructure attributes acted as moderators of associations of within-neighborhood walking for transport with prevalence of commercial destination categories. Composite destinations indices consisting of destination categories related to the specific measures of walking were positively associated with walking for transport. Conclusions The availability of both non-commercial and commercial destinations may promote within-neighborhood walking for transport, while recreational facilities and public transit points may facilitate overall walking for transport. However, destination-rich areas need to also provide adequate levels of personal safety and a physically-unchallenging pedestrian network. PMID:23782627
Origin and destination survey results for the Orlando-Orange County Expressway Authority

DOT National Transportation Integrated Search

2000-09-01

This report describes the design, administration, and analysis of the Origin/Destination survey of users of the Orlando-Orange County Expressway System. The basic survey form consisted of a letter-sized paper with the questionnaire on one side and a ...
Development of cloud-operating platform for detention facility design

NASA Astrophysics Data System (ADS)

Tun Lee, Kwan; Hung, Meng-Chiu; Tseng, Wei-Fan; Chan, Yi-Ping

2017-04-01

In the past 20 years, the population of Taiwan has accumulated in urban areas. The land development has changed the hydrological environment and resulted in the increase of surface runoff and shortened the time to peak discharge. The change of runoff characteristics increases the flood risk and reduces resilient ability of the city during flood. Considering that engineering measures may not be easy to implement in populated cities, detention facilities set on building basements have been proposed to compromise the increase of surface runoff resulting from development activities. In this study, a web-based operational platform has been developed to integrate the GIS technologies, hydrological analyses, as well as relevant regulations for the design of detention facilities. The design procedure embedded in the system includes a prior selection of type and size of the detention facility, integrated hydrological analysis for the developing site, and inspection of relevant regulations. After login the platform, designers can access the system database to retrieve road maps, land use coverages, and storm sewer information. Once the type, size, inlet, and outlet of the detention facility are assigned, the system can acquire the rainfall intensity-duration-frequency information from adjacent rain gauges to perform hydrological analyses for the developing site. The increase of the runoff volume due to the development and the reduction of the outflow peak through the construction of the detention facility can be estimated. The outflow peak at the target site is then checked with relevant regulations to confirm the suitability of the detention facility design. The proposed web-based platform can provide a concise layout of the detention facility and the drainageway of the developing site on a graphical interface. The design information can also be delivered directly through a web link to authorities for inspecting to simplify the complex administrative procedures.
Student Destination Surveys: Design and Development of an Instrument for Use by TAFE Agencies.

ERIC Educational Resources Information Center

Walsh, Lynne

The development of the student destination survey instrument was a response to an identified need for a tool to measure the effectiveness of Technical and Further Education (TAFE) programs in Australia. The requirement was for a tool that was flexible in accommodating changing course structures and consistent across state and territory boundaries.…
48 CFR 47.303-6 - F.o.b. destination.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false F.o.b. destination. 47.303... MANAGEMENT TRANSPORTATION Transportation in Supply Contracts 47.303-6 F.o.b. destination. (a) Explanation of delivery term. F.o.b. destination means— (1) Free of expense to the Government delivered, on board the...

Emotion and Destination Memory in Alzheimer's Disease.

PubMed

El Haj, Mohamad; Raffard, Stephane; Antoine, Pascal; Gely-Nargeot, Marie-Christine

2015-01-01

Research shows beneficial effect of emotion on self-related information in patients with Alzheimer's Disease (AD). Our paper investigates whether emotion improves destination memory (e.g., did I tell you about the manuscript?), which is thought to be self-related (e.g., did I tell you about the manuscript?). To this aim, twenty-seven AD patients and thirty healthy older adults told 24 neutral facts to eight neutral faces, eight positive faces, and eight negative faces. On a subsequent recognition task, participants had to decide whether they had previously told a given fact to a given face or not. Data revealed no emotional effect on destination memory in AD patients. However, in healthy older adults, better destination memory was observed for negative faces than for positive faces, and the latter memory was better than for neutral faces. The absence of emotional effect on destination memory in AD is interpreted in terms of substantial decline in this memory in the disease.
Proposed BISOL Facility - a Conceptual Design

NASA Astrophysics Data System (ADS)

Ye, Yanlin

2018-05-01

In China, a new large-scale nuclear-science research facility, namely the "Beijing Isotope-Separation-On-Line neutron-rich beam facility (BISOL)", has been proposed and reviewed by the governmental committees. This facility aims at both basic science and application goals, and is based on a double-driver concept. On the basic science side, the radioactive ion beams produced from the ISOL device, driven by a research reactor or by an intense deuteron-beam ac- celerator, will be used to study the new physics and technologies at the limit of the nuclear stability in the medium mass region. On the other side regarding to the applications, the facility will be devoted to the material research asso- ciated with the nuclear energy system, by using typically the intense neutron beams produced from the deuteron-accelerator driver. The initial design will be outlined in this report.
Conceptual design of an in-space cryogenic fluid management facility, executive summary

NASA Technical Reports Server (NTRS)

Willen, G. S.; Riemer, D. H.; Hustvedt, D. C.

1981-01-01

The conceptual design of a Spacelab experiment to develop the technology associated with low gravity propellant management is summarized. The preliminary facility definition, conceptual design and design analysis, and facility development plan, including schedule and cost estimates for the facility, are presented.
Psychosocial and Environmental Correlates of Walking, Cycling, Public Transport and Passive Transport to Various Destinations in Flemish Older Adolescents.

PubMed

Verhoeven, Hannah; Simons, Dorien; Van Dyck, Delfien; Van Cauwenberg, Jelle; Clarys, Peter; De Bourdeaudhuij, Ilse; de Geus, Bas; Vandelanotte, Corneel; Deforche, Benedicte

2016-01-01

Active transport is a convenient way to incorporate physical activity in adolescents' daily life. The present study aimed to investigate which psychosocial and environmental factors are associated with walking, cycling, public transport (train, tram, bus, metro) and passive transport (car, motorcycle, moped) over short distances (maximum eight kilometres) among older adolescents (17-18 years), to school and to other destinations. 562 older adolescents completed an online questionnaire assessing socio-demographic variables, psychosocial variables, environmental variables and transport to school/other destinations. Zero-inflated negative binomial regression models were performed. More social modelling and a higher residential density were positively associated with walking to school and walking to other destinations, respectively. Regarding cycling, higher self-efficacy and a higher social norm were positively associated with cycling to school and to other destinations. Regarding public transport, a higher social norm, more social modelling of siblings and/or friends, more social support and a higher land use mix access were positively related to public transport to school and to other destinations, whereas a greater distance to school only related positively to public transport to school. Regarding passive transport, more social support and more perceived benefits were positively associated with passive transport to school and to other destinations. Perceiving less walking and cycling facilities at school was positively related to passive transport to school only, and more social modelling was positively related to passive transport to other destinations. Overall, psychosocial variables seemed to be more important than environmental variables across the four transport modes. Social norm, social modelling and social support were the most consistent psychosocial factors which indicates that it is important to target both older adolescents and their social environment
Church, place, and crime: Latinos and homicide in new destinations.

PubMed

Shihadeh, Edward S; Winters, Lisa

2010-01-01

Latinos are moving beyond traditional areas and settling in new, potentially disorganized destinations. Without an established immigrant community, new destinations appear to rely more on the local religious ecology to regulate community life and to keep crime low. We examine the link between religious ecology and Latino homicide victimization for traditional and new destination counties. We observe four findings. (1) A Catholic presence has no effect on Latino violence in the old and well-organized traditional settlement areas. But in new Latino settlement areas, a Catholic presence substantially lowers violence against Latinos. In contrast, mainline Protestantism is linked to high levels of violence against Latinos in new destinations. (2) Previous claims that Latino communities are safe do not apply to new destinations, where Latinos are murdered at a high rate. (3) Previous claims that areas with high Latino immigration are safe for Latinos are not true for new destinations. (4) New Latino destinations offer little insulation from the effects of economic deprivation on violence. We discuss the implications of the findings.
40 CFR 60.90 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for Hot Mix Asphalt Facilities § 60.90 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each hot mix asphalt facility. For the purpose of this subpart, a hot mix asphalt facility is comprised only of any combination of the following...
40 CFR 60.90 - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... for Hot Mix Asphalt Facilities § 60.90 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each hot mix asphalt facility. For the purpose of this subpart, a hot mix asphalt facility is comprised only of any combination of the following...
40 CFR 60.90 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... for Hot Mix Asphalt Facilities § 60.90 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each hot mix asphalt facility. For the purpose of this subpart, a hot mix asphalt facility is comprised only of any combination of the following...
40 CFR 60.90 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... for Hot Mix Asphalt Facilities § 60.90 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each hot mix asphalt facility. For the purpose of this subpart, a hot mix asphalt facility is comprised only of any combination of the following...
40 CFR 60.90 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... for Hot Mix Asphalt Facilities § 60.90 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each hot mix asphalt facility. For the purpose of this subpart, a hot mix asphalt facility is comprised only of any combination of the following...
Planning and Designing Facilities. Facility Design and Development--Part 1

ERIC Educational Resources Information Center

Hypes, Michael G.

2006-01-01

Before one begins the planning process for a new facility, it is important to determine if there is a need for a new facility. The demand for a new facility can be drawn from increases in the number of users, the type of users, and the type of events to be conducted in the facility. A feasibility study should be conducted to analyze the legal…
Designs for surge immunity in critical electronic facilities

NASA Technical Reports Server (NTRS)

Roberts, Edward F., Jr.

1991-01-01

In recent years, Federal Aviation Administration (FAA) embarked on a program replacing older tube type electronic equipment with newer solid state equipment. This replacement program dramatically increased the susceptibility of the FAA's facilities to lightning related damages. The proposal is presented of techniques which may be employed to lessen the susceptibility of new FAA electronic facility designs to failures resulting from lightning related surges and transients as well as direct strikes. The general concept espoused is one of a consistent system approach employing both perimeter and internal protection. It compares the technique presently employed to reduce electronic noise with other techniques which reduce noise while lowering susceptibility to lightning related damage. It is anticipated that these techniques will be employed in the design of an Air Traffic Control Tower in a high isokeraunic area. This facility would be subjected to rigorous monitoring over a multi-year period to provide quantitative data hopefully supporting the advantage of this design.
Truck facility access design guidelines statewide.

DOT National Transportation Integrated Search

2011-06-01

The overall purpose of this project is to develop design guidelines for truck access to truck stop facilities adjoining interstate highways and accessed by interchanges in Louisiana. The specific objectives of the research are to: 1. Identify existin...
40 CFR 60.400 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Performance for Phosphate Rock Plants § 60.400 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities used in phosphate rock plants..., calciners, grinders, and ground rock handling and storage facilities, except those facilities producing or...
40 CFR 60.400 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Performance for Phosphate Rock Plants § 60.400 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities used in phosphate rock plants..., calciners, grinders, and ground rock handling and storage facilities, except those facilities producing or...
40 CFR 60.400 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Performance for Phosphate Rock Plants § 60.400 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities used in phosphate rock plants..., calciners, grinders, and ground rock handling and storage facilities, except those facilities producing or...
40 CFR 60.400 - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Performance for Phosphate Rock Plants § 60.400 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities used in phosphate rock plants..., calciners, grinders, and ground rock handling and storage facilities, except those facilities producing or...
40 CFR 60.400 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Phosphate Rock Plants § 60.400 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities used in phosphate rock plants..., calciners, grinders, and ground rock handling and storage facilities, except those facilities producing or...
A Facilities Manager's Guide to Green Building Design.

ERIC Educational Resources Information Center

Simpson, Walter

2001-01-01

Explains how the "green building" approach to educational facilities design creates healthy, naturally lit, attractive buildings with lower operating and life cycle costs. Tips on getting started on a green design and overcoming the barriers to the green design concept are discussed. (GR)
40 CFR 60.300 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Applicability and designation of affected facility. 60.300 Section 60.300 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Grain Elevators § 60.300 Applicability and designation of affected facility. (a) The...

40 CFR 60.300 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Applicability and designation of affected facility. 60.300 Section 60.300 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Grain Elevators § 60.300 Applicability and designation of affected facility. (a) The...
Balancing Multiple Needs through Innovative Facility Design.

ERIC Educational Resources Information Center

Romano, C. Renee; Hanish, Jan

2003-01-01

Designing buildings that incorporate and integrate a number of departments and functions is one way that colleges and universities are balancing financial challenges and facility needs. These buildings can transform the campus, but they require planning and coordination from a carefully assembled design team. (Contains 18 references.) (Author)
Design Portfolio, 1995. The Educational Facility Planner.

ERIC Educational Resources Information Center

The Educational Facility Planner, 1995

1995-01-01

This document contains nationally recognized educational-facility designs, including the 1994 James D. MacConnell Award Winner--Heritage Oak Elementary School in Roseville, California. The architectural designs of other schools are also included--10 elementary schools, 6 high schools, 1 vocational school, 3 institutes of higher education, 1…
Destination: Alumni Relations

ERIC Educational Resources Information Center

Scully, Maura King

2010-01-01

Increasingly today, with the growing and sophisticated skill set alumni professionals need to get the job done, alumni relations has become a destination career rather than a stop along the way. Modern alumni relations is "so much more than homecoming and punch-and-cookie receptions." It's marketing, volunteer management, and social networking. To…
Predictors of trips to food destinations.

PubMed

Kerr, Jacqueline; Frank, Lawrence; Sallis, James F; Saelens, Brian; Glanz, Karen; Chapman, Jim

2012-05-20

Food environment studies have focused on ethnic and income disparities in food access. Few studies have investigated distance travelled for food and did not aim to inform the geographic scales at which to study the relationship between food environments and obesity. Further, studies have not considered neighborhood design as a predictor of food purchasing behavior. Atlanta residents (N = 4800) who completed a travel diary and reported purchasing or consuming food at one of five food locations were included in the analyses. A total of 11,995 food-related trips were reported. Using mixed modeling to adjust for clustering of trips by participants and households, person-level variables (e.g. demographics), neighborhood-level urban form measures, created in GIS, and trip characteristics (e.g. time of day, origin and destination) were investigated as correlates of distance travelled for food and frequency of grocery store and fast food outlet trips. Mean travel distance for food ranged from 4.5 miles for coffee shops to 6.3 miles for superstores. Type of store, urban form, type of tour, day of the week and ethnicity were all significantly related to distance travelled for food. Origin and destination environment, type of tour, day of week, age, gender, income, ethnicity, vehicle access and obesity status were all significantly related to visiting a grocery store. Home neighborhood environment, day of week, type of tour, gender, income, education level, age, and obesity status were all significantly related to likelihood of visiting a fastfood outlet. The present study demonstrated that people travel sizeable distances for food and this distance is related to urban. Results suggest that researchers need to employ different methods to characterize food environments than have been used to assess urban form in studies of physical activity. Food is most often purchased while traveling from locations other than home, so future studies should assess the food environment around
10 CFR 835.1002 - Facility design and modifications.

Code of Federal Regulations, 2012 CFR

2012-01-01

....1002 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Design and Control § 835.1002... occupational exposure is maintained ALARA in developing and justifying facility design and physical controls... in § 835.202. (c) Regarding the control of airborne radioactive material, the design objective shall...
10 CFR 835.1002 - Facility design and modifications.

Code of Federal Regulations, 2013 CFR

2013-01-01

....1002 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Design and Control § 835.1002... occupational exposure is maintained ALARA in developing and justifying facility design and physical controls... in § 835.202. (c) Regarding the control of airborne radioactive material, the design objective shall...
10 CFR 835.1002 - Facility design and modifications.

Code of Federal Regulations, 2010 CFR

2010-01-01

....1002 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Design and Control § 835.1002... occupational exposure is maintained ALARA in developing and justifying facility design and physical controls... in § 835.202. (c) Regarding the control of airborne radioactive material, the design objective shall...
10 CFR 835.1002 - Facility design and modifications.

Code of Federal Regulations, 2014 CFR

2014-01-01

....1002 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Design and Control § 835.1002... occupational exposure is maintained ALARA in developing and justifying facility design and physical controls... in § 835.202. (c) Regarding the control of airborne radioactive material, the design objective shall...
10 CFR 835.1002 - Facility design and modifications.

Code of Federal Regulations, 2011 CFR

2011-01-01

....1002 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Design and Control § 835.1002... occupational exposure is maintained ALARA in developing and justifying facility design and physical controls... in § 835.202. (c) Regarding the control of airborne radioactive material, the design objective shall...
Destination memory and cognitive theory of mind in normal ageing.

PubMed

El Haj, Mohamad; Raffard, Stéphane; Gély-Nargeot, Marie-Christine

2016-01-01

Destination memory is the ability to remember the destination to which a piece of information has been addressed (e.g., "Did I tell you about the promotion?"). This ability is found to be impaired in normal ageing. Our work aimed to link this deterioration to the decline in theory of mind. Forty younger adults (M age = 23.13 years, SD = 4.00) and 36 older adults (M age = 69.53 years, SD = 8.93) performed a destination memory task. They also performed the False-belief test addressing cognitive theory of mind and the Reading the mind in the eyes test addressing affective theory of mind. Results showed significant deterioration in destination memory, cognitive theory of mind and affective theory of mind in the older adults. The older adults' performance on destination memory was significantly correlated with and predicted by their performance on cognitive theory of mind. Difficulties in the ability to interpret and predict others' mental states are related to destination memory decline in older adults.
Conceptual Design of an In-Space Cryogenic Fluid Management Facility

NASA Technical Reports Server (NTRS)

Willen, G. S.; Riemer, D. H.; Hustvedt, D. C.

1981-01-01

The conceptual design of a Spacelab experiment to develop the technology associated with low gravity propellant management is presented. The proposed facility consisting of a supply tank, receiver tank, pressurization system, instrumentation, and supporting hardware, is described. The experimental objectives, the receiver tank to be modeled, and constraints imposed on the design by the space shuttle, Spacelab, and scaling requirements, are described. The conceptual design, including the general configurations, flow schematics, insulation systems, instrumentation requirements, and internal tank configurations for the supply tank and the receiver tank, is described. Thermal, structural, fluid, and safety and reliability aspects of the facility are analyzed. The facility development plan, including schedule and cost estimates for the facility, is presented. A program work breakdown structure and master program schedule for a seven year program are included.
Influence of gamma-ray skyshine on nuclear facilities design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ohta, M.; Tsuji, M.; Kimura, Y.

1986-01-01

In safety analysis of nuclear facilities, skyshine dose rate at site boundary is one of the most important shielding design problems. For nuclear power stations in Japan, the skyshine dose rate at the site boundary has been specified not to exceed 5 mR/yr by the authorities, including total dose contribution from all structures on site, and this guide is commonly applied to other nuclear fuel cycle facilities. Therefore the design criterion dose of each structure on site is, considering plot planning, shielding condition, and so on, defined as a value <5 mR/yr. The purpose of this study is to investigatemore » how skyshine dose standards or other factors have an influence on the design of nuclear facilities, in a parametric survey of gamma-ray skyshine.« less
48 CFR 47.305-4 - F.o.b. destination solicitations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false F.o.b. destination... CONTRACT MANAGEMENT TRANSPORTATION Transportation in Supply Contracts 47.305-4 F.o.b. destination solicitations. (a) When preparing f.o.b destination solicitations, the contracting officer shall refer to 47.303...
19 CFR 122.93 - Procedure at destination or exportation airport.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Procedure at destination or exportation airport... Transit § 122.93 Procedure at destination or exportation airport. (a) Delivery to port director. When a bonded shipment arrives at the destination or exportation airport, the aircraft commander or agent shall...
19 CFR 122.93 - Procedure at destination or exportation airport.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Procedure at destination or exportation airport... Transit § 122.93 Procedure at destination or exportation airport. (a) Delivery to port director. When a bonded shipment arrives at the destination or exportation airport, the aircraft commander or agent shall...
19 CFR 122.93 - Procedure at destination or exportation airport.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Procedure at destination or exportation airport... Transit § 122.93 Procedure at destination or exportation airport. (a) Delivery to port director. When a bonded shipment arrives at the destination or exportation airport, the aircraft commander or agent shall...
19 CFR 122.93 - Procedure at destination or exportation airport.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Procedure at destination or exportation airport... Transit § 122.93 Procedure at destination or exportation airport. (a) Delivery to port director. When a bonded shipment arrives at the destination or exportation airport, the aircraft commander or agent shall...
19 CFR 122.93 - Procedure at destination or exportation airport.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Procedure at destination or exportation airport... Transit § 122.93 Procedure at destination or exportation airport. (a) Delivery to port director. When a bonded shipment arrives at the destination or exportation airport, the aircraft commander or agent shall...
48 CFR 47.305-4 - F.o.b. destination solicitations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... CONTRACT MANAGEMENT TRANSPORTATION Transportation in Supply Contracts 47.305-4 F.o.b. destination solicitations. (a) When preparing f.o.b destination solicitations, the contracting officer shall refer to 47.303... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false F.o.b. destination...

40 CFR 60.260 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... affected facility. 60.260 Section 60.260 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Ferroalloy Production Facilities § 60.260 Applicability and designation of affected facility..., ferrochrome silicon, silvery iron, high-carbon ferrochrome, charge chrome, standard ferromanganese...
40 CFR 60.260 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... affected facility. 60.260 Section 60.260 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Ferroalloy Production Facilities § 60.260 Applicability and designation of affected facility..., ferrochrome silicon, silvery iron, high-carbon ferrochrome, charge chrome, standard ferromanganese...
Cold Vacuum Drying facility civil structural system design description (SYS 06)

DOE Office of Scientific and Technical Information (OSTI.GOV)

PITKOFF, C.C.

This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.
Built environmental factors and adults' travel behaviors: Role of street layout and local destinations.

PubMed

Koohsari, Mohammad Javad; Owen, Neville; Cole, Rachel; Mavoa, Suzanne; Oka, Koichiro; Hanibuchi, Tomoya; Sugiyama, Takemi

2017-03-01

Street layout is consistently associated with adults' travel behaviors, however factors influencing this association are unclear. We examined associations of street layout with travel behaviors: walking for transport (WT) and car use; and, the extent to which these relationships may be accounted for by availability of local destinations. A 24-h travel diary was completed in 2009 by 16,345 adult participants of the South-East Queensland Household Travel Survey, Australia. Three travel-behavior outcomes were derived: any home-based WT; over 30min of home-based WT; and, over 60min of car use. For street layout, a space syntax measure of street integration was calculated for each Statistical Area 1 (SA1, the smallest geographic unit in Australia). An objective measure of availability of destinations - Walk Score - was also derived for each SA1. Logistic regression examined associations of street layout with travel behaviors. Mediation analyses examined to what extent availability of destinations explained the associations. Street integration was significantly associated with travel behaviors. Each one-decile increment in street integration was associated with an 18% (95%CI: 1.15, 1.21) higher odds of any home-based WT; a 10% (95%CI: 1.06, 1.15) higher odds of over 30min of home-based WT; and a 5% (95%CI: 0.94, 0.96) lower odds of using a car over 60min. Local destinations partially mediated the effects of street layout on travel behaviors. Well-connected street layout contributes to active travel partially through availability of more local destinations. Urban design strategies need to address street layout and destinations to promote active travel among residents. Copyright © 2016 Elsevier Inc. All rights reserved.
A conceptual framework for the study of social capital in new destination immigrant communities.

PubMed

Bernosky de Flores, Catherine H

2010-07-01

Mexican immigration to the United States is an intragenerational phenomenon. Young adult Mexicans leave their families of origin in search of employment opportunities that pull them to new destination communities. A conceptual framework that defines and relates the concepts of human capital, personal networks, social capital, and resources is introduced. The influence of social capital on the capacity of immigrants to access resources is described. The framework informed the design of a study to examine the approaches used by Mexican immigrant women to access resources for healthy childbearing in the absence of traditional family support systems in a new destination community.
30 CFR 585.701 - What must I include in my Facility Design Report?

Code of Federal Regulations, 2014 CFR

2014-07-01

... design or installation, e.g., oceanographic and soil reports including the results of the surveys... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What must I include in my Facility Design... Facility Design, Fabrication, and Installation Reports § 585.701 What must I include in my Facility Design...
30 CFR 585.701 - What must I include in my Facility Design Report?

Code of Federal Regulations, 2013 CFR

2013-07-01

... design or installation, e.g., oceanographic and soil reports including the results of the surveys... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What must I include in my Facility Design... Facility Design, Fabrication, and Installation Reports § 585.701 What must I include in my Facility Design...
30 CFR 585.701 - What must I include in my Facility Design Report?

Code of Federal Regulations, 2012 CFR

2012-07-01

... design or installation, e.g., oceanographic and soil reports including the results of the surveys... 30 Mineral Resources 2 2012-07-01 2012-07-01 false What must I include in my Facility Design... Facility Design, Fabrication, and Installation Reports § 585.701 What must I include in my Facility Design...
Destination memory accuracy and confidence in younger and older adults.

PubMed

Johnson, Tara L; Jefferson, Susan C

2018-01-01

Background/Study Context: Nascent research on destination memory-remembering to whom we tell particular information-suggested that older adults have deficits in destination memory and are more confident on inaccurate responses than younger adults. This study assessed the effects of age, attentional resources, and mental imagery on destination memory accuracy and confidence in younger and older adults. Using computer format, participants told facts to pictures of famous people in one of four conditions (control, self-focus, refocus, imagery). Older adults had lower destination memory accuracy than younger adults, driven by a higher level of false alarms. Whereas younger adults were more confident in accurate answers, older adults were more confident in inaccurate answers. Accuracy across participants was lowest when attention was directed internally but significantly improved when mental imagery was used. Importantly, the age-related differences in false alarms and high-confidence inaccurate answers disappeared when imagery was used. Older adults are more likely than younger adults to commit destination memory errors and are less accurate in related confidence judgments. Furthermore, the use of associative memory strategies may help improve destination memory across age groups, improve the accuracy of confidence judgments in older adults, and decrease age-related destination memory impairment, particularly in young-old adults.
Energy Conscious Design: Educational Facilities. [Brief No.] 1.

ERIC Educational Resources Information Center

American Inst. of Architects, Washington, DC.

An energy task group of the American Institute of Architects discusses design features and options that educational facility designers can use to create an energy efficient school building. Design elements cover the building envelope, energy storage system, hydronic heating/cooling systems, solar energy collection, building orientation and shape,…
14 CFR 121.621 - Alternate airport for destination: Flag operations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Alternate airport for destination: Flag... § 121.621 Alternate airport for destination: Flag operations. (a) No person may dispatch an airplane under IFR or over-the-top unless he lists at least one alternate airport for each destination airport in...
14 CFR 121.621 - Alternate airport for destination: Flag operations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Alternate airport for destination: Flag... § 121.621 Alternate airport for destination: Flag operations. (a) No person may dispatch an airplane under IFR or over-the-top unless he lists at least one alternate airport for each destination airport in...
14 CFR 121.621 - Alternate airport for destination: Flag operations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Alternate airport for destination: Flag... § 121.621 Alternate airport for destination: Flag operations. (a) No person may dispatch an airplane under IFR or over-the-top unless he lists at least one alternate airport for each destination airport in...
14 CFR 121.621 - Alternate airport for destination: Flag operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Alternate airport for destination: Flag... § 121.621 Alternate airport for destination: Flag operations. (a) No person may dispatch an airplane under IFR or over-the-top unless he lists at least one alternate airport for each destination airport in...
14 CFR 121.621 - Alternate airport for destination: Flag operations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Alternate airport for destination: Flag... § 121.621 Alternate airport for destination: Flag operations. (a) No person may dispatch an airplane under IFR or over-the-top unless he lists at least one alternate airport for each destination airport in...
How to Tackle Tough Facility Design Considerations

ERIC Educational Resources Information Center

Kalina, David

2007-01-01

This article is part of a series that has offered insight on planning a facilities project, hiring professionals, delivery system options and owner's responsibilities. In this article, the author focuses on some of the planning and design concepts one may be asked to consider in providing direction to his design and construction team. These…
Health facilities humanisation: design guidelines supported by statistical evidence.

PubMed

Bosia, Daniela; Marino, Donatella; Peretti, Gabriella

2016-01-01

Healthcare building humanisation is currently a widely debated issue and the development of patient centered and evidence based design is growing worldwide. Many international health organizations and researchers understand the importance of Patient Centred Design and leading architects incorporate it into the design process. In Italy this design approach is still at an early stage. The article refers to research commissioned by the Italian Health Ministry and carried out by R. Del Nord (Università degli Studi di Firenze) and G. Peretti (Politecnico di Torino) with their collaborators. The scope of the research was the definition of design guidelines for healthcare facilities humanisation. The methodology framework adopted is the well established need and performance approach in architectural design. The article deals with the results of statistical investigations for the definition and ranking of users' needs and the consistent expression of their requirements. The investigations were carried out with the cooperation of psychologists of the Università degli Studi di Torino and researchers of the Università degli Studi di Cagliari. The proposed evaluation system allows ranking of health facilities according to the level of humanisation achieved. The statistical investigation evidence collected allowed the definition of humanisation design guidelines for health-care facilities and for the assessment of their specific level of humanisation.
Destination memory for emotional information in older adults.

PubMed

El Haj, Mohamad; Fasotti, Luciano; Allain, Philippe

2015-01-01

BACKGROUND/STUDY CONTEXT: Destination memory, remembering the destination of the information that one tells, shows significant age-related decline. In the present paper, the authors sought to determine whether destination memory can be improved in older adults using emotional stimuli. This aim was motivated by findings showing better context memory for emotional than for neutral information in older adults. Younger and older adults were asked to tell neutral facts to three types of faces: a neutral one, an emotionally positive one, and an emotionally negative one. On a later recognition test, participants were asked to associate each previously told fact with the face to whom it was told. Destination memory performance was better for facts told to negative than to positive faces, and the latter memory was better than for neutral faces in older adults. Older adults seem to place higher emphasis on emotional material relative to neutral faces, showing better memory for the association between statements and emotional faces.
Performance of Environmental Resources of a Tourist Destination

PubMed Central

2013-01-01

Despite the apparent importance of destinations’ environmental resources, there appears to be little theoretical and applied research explicitly focusing on destination environmental supply. This research attempts to address this gap in the literature. First, it reviews and evaluates the body of research in tourism environmental resources and proposes a conceptual model to test their performance. The model combines tourism supply–demand view with importance–performance gaps and was used to survey tourism in Slovenia. The results show that the studied destination uses its environmental resources too extensively and that Slovenian environmental tourism experience does not meet visitors’ expectations. This finding challenges Slovenian policy makers, who position Slovenia as a green destination. The proposed model can form the basis for further conceptual and empirical research into the tourism contributions of environmental resources. In its present form, it can be used to examine environmental performance and to suggest policy implications for any destination. PMID:29901033
48 CFR 3052.247-72 - F.o.b. destination only.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false F.o.b. destination only... CLAUSES Text of Provisions and Clauses 3052.247-72 F.o.b. destination only. As prescribed in (HSAR) 48 CFR 3047.305-70(c), insert the following provision: F.O.B. Destination Only (DEC 2003) Offers are invited...

A case study of collaborative facilities use in engineering design

NASA Astrophysics Data System (ADS)

Monroe, Laura; Pugmire, David

2010-01-01

In this paper we describe the use of visualization tools and facilities in the collaborative design of a replacement weapons system, the Reliable Replacement Warhead (RRW). We used not only standard collaboration methods but also a range of visualization software and facilities to bring together domain specialists from laboratories across the country to collaborate on the design and integrate this disparate input early in the design. This was the first time in U.S. weapons history that a weapon had been designed in this collaborative manner. Benefits included projected cost savings, design improvements and increased understanding across the project.
Wall finish selection in hospital design: a survey of facility managers.

PubMed

Lavy, Sarel; Dixit, Manish K

2012-01-01

This paper seeks to analyze healthcare facility managers' perceptions regarding the materials used for interior wall finishes and the criteria used to select them. It also examines differences in wall finish materials and the selection process in three major hospital spaces: emergency, surgery, and in-patient units. These findings are compared with healthcare designers' perceptions on similar issues, as currently documented in the literature. Hospital design and the materials used for hospital construction have a considerable effect on the environment and health of patients. A 2002 survey revealed which characteristics healthcare facility designers consider when selecting materials for healthcare facilities; however, no similar study has examined the views of facility managers on building finish selection. A 22-question survey questionnaire was distributed to 210 facility managers of metropolitan, for-profit hospitals in Texas; IRB approval was obtained. Respondents were asked to rank 10 interior wall finish materials and 11 selection criteria for wall finishes. Data from 48 complete questionnaires were analyzed using descriptive statistics and nonparametric statistical analysis methods. The study found no statistically significant differences in terms of wall finish materials or the characteristics for material selection in the three major spaces studied. It identified facility managers' four most-preferred wall finish materials and the five-most preferred characteristics, with a statistical confidence level of greater than 95%. The paper underscores the importance of incorporating all perspectives: facility designers and facility managers should work together toward achieving common organizational goals.
Evaluation of design ventilation requirements for enclosed parking facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ayari, A.; Krarti, M.

2000-07-01

This paper proposes a new design approach to determine the ventilation requirements for enclosed parking garages. The design approach accounts for various factors that affect the indoor air quality within a parking facility, including the average CO emission rate, the average travel time, the number of cars, and the acceptable CO level within the parking garage. This paper first describes the results of a parametric analysis based on the design method that was developed. Then the design method is presented to explain how the ventilation flow rate can be determined for any enclosed parking facility. Finally, some suggestions are proposedmore » to save fan energy for ventilating parking garages using demand ventilation control strategies.« less
40 CFR 60.270 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... affected facility. 60.270 Section 60.270 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... August 17, 1983 § 60.270 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities in steel plants that produce carbon, alloy, or...
40 CFR 60.270 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... affected facility. 60.270 Section 60.270 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... August 17, 1983 § 60.270 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities in steel plants that produce carbon, alloy, or...
Psychosocial and Environmental Correlates of Walking, Cycling, Public Transport and Passive Transport to Various Destinations in Flemish Older Adolescents

PubMed Central

Verhoeven, Hannah; Simons, Dorien; Van Dyck, Delfien; Van Cauwenberg, Jelle; Clarys, Peter; De Bourdeaudhuij, Ilse; de Geus, Bas; Vandelanotte, Corneel; Deforche, Benedicte

2016-01-01

Background Active transport is a convenient way to incorporate physical activity in adolescents’ daily life. The present study aimed to investigate which psychosocial and environmental factors are associated with walking, cycling, public transport (train, tram, bus, metro) and passive transport (car, motorcycle, moped) over short distances (maximum eight kilometres) among older adolescents (17–18 years), to school and to other destinations. Methods 562 older adolescents completed an online questionnaire assessing socio-demographic variables, psychosocial variables, environmental variables and transport to school/other destinations. Zero-inflated negative binomial regression models were performed. Results More social modelling and a higher residential density were positively associated with walking to school and walking to other destinations, respectively. Regarding cycling, higher self-efficacy and a higher social norm were positively associated with cycling to school and to other destinations. Regarding public transport, a higher social norm, more social modelling of siblings and/or friends, more social support and a higher land use mix access were positively related to public transport to school and to other destinations, whereas a greater distance to school only related positively to public transport to school. Regarding passive transport, more social support and more perceived benefits were positively associated with passive transport to school and to other destinations. Perceiving less walking and cycling facilities at school was positively related to passive transport to school only, and more social modelling was positively related to passive transport to other destinations. Conclusions Overall, psychosocial variables seemed to be more important than environmental variables across the four transport modes. Social norm, social modelling and social support were the most consistent psychosocial factors which indicates that it is important to target both
[Role of context recall in destination memory decline in normal aging].

PubMed

El Haj, Mohamad; Allain, Philippe

2014-12-01

Until recently, little was known about destination memory, or memory for the destination of outputted information. In the present work, this memory was evaluated in 32 older adults and 36 younger adults, who had to associate proverbs to pictures of famous people and decide, on a subsequent recognition task, whether they had previously told that proverb to that face or not. When deciding about the destination, participants had to provide contextual judgment, that is, whether each picture had been previously exposed in color or in black and white. Participants also performed a neuropsychological battery tapping episodic memory and executive functions. Findings showed poor destination recall in older participants. Destination recall in older adults was reliably predicted by with their context recall. Destination memory seems to be particularly affected by aging, a deterioration that can be related to deficits in processing contextual features during encoding.
E-4 Test Facility Design Status

NASA Technical Reports Server (NTRS)

Ryan, Harry; Canady, Randy; Sewell, Dale; Rahman, Shamim; Gilbrech, Rick

2001-01-01

Combined-cycle propulsion technology is a strong candidate for meeting NASA space transportation goals. Extensive ground testing of integrated air-breathing/rocket system (e.g., components, subsystems and engine systems) across all propulsion operational modes (e.g., ramjet, scramjet) will be needed to demonstrate this propulsion technology. Ground testing will occur at various test centers based on each center's expertise. Testing at the NASA John C. Stennis Space Center will be primarily concentrated on combined-cycle power pack and engine systems at sea level conditions at a dedicated test facility, E-4. This paper highlights the status of the SSC E-4 test Facility design.
Infection prevention and control in the design of healthcare facilities.

PubMed

Farrow, Tye S; Black, Stephen M

2009-01-01

The lead paper, "Healthcare-Associated Infections as Patient Safety Indicators," written by Gardam, Lemieux, Reason, van Dijk and Goel, puts forward the design of healthcare facilities as one of many strategies to improve patient safety with respect to healthcare-associated infections. This commentary explores some of the issues in balancing infection prevention and control priorities with other needs and values brought to the design process. This balance is challenged not only by a lack of supporting evidence but also by the superficial nature in which infection prevention and control are often discussed within a design context. For the physical environment to support any patient safety initiative, the design of the processes must be developed in conjunction with that of the physical environment so that compliance can be natural and convenient. Finally, consideration is given to the value of documenting decision-making related to infection prevention and control in facility design and ongoing assessments of existing facilities.
Fire safety design of a mobile quarantine facility

NASA Technical Reports Server (NTRS)

Bass, R. S.; Hirasaki, J. K.

1971-01-01

During the design phase of the Mobile Quarantine Facility (MQF), a primary consideration was fire safety. Therefore, appropriate criteria and ground rules were used in the design and construction of the facility. The fire codes and fire-requirement listings that are used by commerical airlines were supplied to the Manned Spacecraft Center (MSC) by the Federal Aviation Agency (FAA). After these codes were reviewed, a basic ground rule was adopted that flame protection for all combustible materials should be at least equivalent to or better than the standards for commercial aircraft. Because the MQF was designed to operate with an interior atmosphere of air rather than with an oxygen-enriched atmosphere such as that of the Apollo spacecraft cabin, the requirements for MQF material were not as stringent as those for the spacecraft.
Greening Federal Facilities: An Energy, Environmental, and Economic Resource Guide for Federal Facility Managers and Designers; Second Edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, A.

2001-05-16

Greening Federal Facilities, Second Edition, is a nuts-and-bolts resource guide compiled to increase energy and resource efficiency, cut waste, and improve the performance of Federal buildings and facilities. The guide highlights practical actions that facility managers, design and construction staff, procurement officials, and facility planners can take to save energy and money, improve the comfort and productivity of employees, and benefit the environment. It supports a national effort to promote energy and environmental efficiency in the nation's 500,000 Federal buildings and facilities. Topics covered include current Federal regulations; environmental and energy decision-making; site and landscape issues; building design; energy systems;more » water and wastewater; materials; waste management, and recycling; indoor environmental quality; and managing buildings.« less
40 CFR 61.90 - Designation of facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Emissions of Radionuclides Other Than Radon From Department of Energy Facilities § 61.90 Designation of... Department of Energy that emits any radionuclide other than radon-222 and radon-220 into the air, except that...
40 CFR 61.90 - Designation of facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Emissions of Radionuclides Other Than Radon From Department of Energy Facilities § 61.90 Designation of... Department of Energy that emits any radionuclide other than radon-222 and radon-220 into the air, except that...
40 CFR 60.60 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... for Portland Cement Plants § 60.60 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities in portland cement plants...
40 CFR 60.60 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... for Portland Cement Plants § 60.60 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities in portland cement plants...
40 CFR 60.60 - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... for Portland Cement Plants § 60.60 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities in portland cement plants...
40 CFR 60.60 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... for Portland Cement Plants § 60.60 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities in portland cement plants...
40 CFR 60.60 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for Portland Cement Plants § 60.60 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities in portland cement plants...
Destination Motivation, Cultural Orientation, and Adaptation: International Students' Destination-Loyalty Intention

ERIC Educational Resources Information Center

Jamaludin, Nor Lelawati; Sam, David Lackland; Sandal, Gro Mjeldheim

2018-01-01

This study aims to understand factors predicting destination-loyalty intention in international education. A sample of 378 long-term (n = 195) and short-term (n = 183) international students participated in the study carried out in 2014 through an on-line survey at the University of Bergen, Norway. Using a series of hierarchical regression…
40 CFR 60.330 - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Performance for Stationary Gas Turbines § 60.330 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities: All stationary gas turbines...

40 CFR 60.330 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Stationary Gas Turbines § 60.330 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities: All stationary gas turbines...
40 CFR 60.330 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Performance for Stationary Gas Turbines § 60.330 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities: All stationary gas turbines...
40 CFR 60.330 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Performance for Stationary Gas Turbines § 60.330 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities: All stationary gas turbines...
40 CFR 60.170 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Primary Zinc Smelters § 60.170 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities in primary zinc smelters...
40 CFR 60.330 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Performance for Stationary Gas Turbines § 60.330 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities: All stationary gas turbines...
Design Criteria for Microbiological Facilities at Fort Detrick. Volume II: Design Criteria

ERIC Educational Resources Information Center

Army Biological Labs., Fort Detrick, MD. Industrial Health and Safety Div.

Volume II of a two-volume manual of design criteria, based primarily on biological safety considerations. It is prepared for the use of architect-engineers in designing new or modified microbiological facilities for Fort Detrick, Maryland. Volume II is divided into the following sections: (1) architectural, (2) heating, ventilating, and air…
Design strategies for the International Space University's variable gravity research facility

NASA Technical Reports Server (NTRS)

Bailey, Sheila G.; Chiaramonte, Francis P.; Davidian, Kenneth J.

1990-01-01

A variable gravity research facility named 'Newton' was designed by 58 students from 13 countries at the International Space University's 1989 summer session at the Universite Louis Pasteur, Strasbourge, France. The project was comprehensive in scope, including a political and legal foundation for international cooperation, development and financing; technical, science and engineering issues; architectural design; plausible schedules; and operations, crew issues and maintenance. Since log-term exposure to zero gravity is known to be harmful to the human body, the main goal was to design a unique variable gravity research facility which would find a practical solution to this problem, permitting a manned mission to Mars. The facility would not duplicate other space-based facilities and would provide the flexibility for examining a number of gravity levels, including lunar and Martian gravities. Major design alternatives included a truss versus a tether based system which also involved the question of docking while spinning or despinning to dock. These design issues are described. The relative advantages or disadvantages are discussed, including comments on the necessary research and technology development required for each.
40 CFR 60.710 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Magnetic Tape Coating Facilities § 60.710 Applicability and designation of affected facility... than 370 m3 of solvent for the manufacture of magnetic tape per calendar year is subject only to the... of magnetic tape equals or exceeds these amounts in any calendar year, the facility is subject to...
40 CFR 60.710 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Performance for Magnetic Tape Coating Facilities § 60.710 Applicability and designation of affected facility... than 370 m3 of solvent for the manufacture of magnetic tape per calendar year is subject only to the... of magnetic tape equals or exceeds these amounts in any calendar year, the facility is subject to...
Feasibility study and verified design concept for new improved hot gas facility

NASA Technical Reports Server (NTRS)

1986-01-01

The MSFC Hot Gas Facility (HGF) was fabricated in 1975 as a temporary facility to provide immediate turnaround testing to support the SRB and ET TPS development. This facility proved to be very useful and was used to make more than 1300 runs, far more than ever intended in the original design. Therefore, it was in need of constant repair and needed to be replaced with a new improved design to support the continuing SRB/ET TPS product improvement and/or removal efforts. MSFC contracted with Lockheed-Huntsville to work on this improved design through contract NAS8-36304 Feasibility Study and Verified Design Concept for the New Improved Hot Gas Facility. The results of Lockheed-Huntsville's efforts under this contract are summarized.
Conceptual design of the National Ignition Facility

NASA Astrophysics Data System (ADS)

Paisner, Jeffrey A.; Boyes, John D.; Kumpan, Steven A.; Lowdermilk, W. Howard; Sorem, Michael S.

1995-12-01

The Secretary of the U.S. Department of Energy (DOE) commissioned a conceptual design report (CDR) for the National Ignition Facility (NIF) in January 1993 as part of a key decision zero (KD0), justification of mission need. Motivated by the progress to date by the inertial confinement fusion (ICF) program in meeting the Nova technical contract goals established by the National Academy of Sciences in 1989, the Secretary requested a design using a solid-state laser driver operating at the third harmonic (0.35 micrometer) of neodymium (Nd) glass. The participating ICF laboratories signed a memorandum of agreement in August 1993, and established a project organization, including a technical team from the Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratories (SNL), and the Laboratory for Laser Energetics at the University of Rochester. Since then, we completed the NIF conceptual design, based on standard construction at a generic DOE defense program's site, and issued a 7,000-page, 27-volume CDR in May 1994. Over the course of the conceptual design study, several other key documents were generated, including a facilities requirements document, a conceptual design scope and plan, a target physics design document, a laser design cost basis document, a functional requirements document, an experimental plan for indirect drive ignition, and a preliminary hazards analysis (PHA) document. DOE used the PHA to categorize the NIF as a low-hazard, non-nuclear facility. On October 21, 1994 the Secretary of Energy issued a key decision one (KD1) for the NIF, which approved the project and authorized DOE to request Office of Management and Budget-approval for congressional line-item FY 1996 NIF funding for preliminary engineering design and for National Environmental Policy Act activities. In addition, the Secretary declared Livermore as the preferred site for constructing the NIF. In February 1995, the NIF Project was
Design and Construction of a Hydroturbine Test Facility

NASA Astrophysics Data System (ADS)

Ayli, Ece; Kavurmaci, Berat; Cetinturk, Huseyin; Kaplan, Alper; Celebioglu, Kutay; Aradag, Selin; Tascioglu, Yigit; ETU Hydro Research Center Team

2014-11-01

Hydropower is one of the clean, renewable, flexible and efficient energy resources. Most of the developing countries invest on this cost-effective energy source. Hydroturbines for hydroelectric power plants are tailor-made. Each turbine is designed and constructed according to the properties, namely the head and flow rate values of the specific water source. Therefore, a center (ETU Hydro-Center for Hydro Energy Research) for the design, manufacturing and performance tests of hydraulic turbines is established at TOBB University of Economics and Technology to promote research in this area. CFD aided hydraulic and structural design, geometry optimization, manufacturing and performance tests of hydraulic turbines are the areas of expertise of this center. In this paper, technical details of the design and construction of this one of a kind test facility in Turkey, is explained. All the necessary standards of IEC (International Electrotechnical Commission) are met since the test facility will act as a certificated test center for hydraulic turbines.
Engineering test facility design definition

NASA Technical Reports Server (NTRS)

Bercaw, R. W.; Seikel, G. R.

1980-01-01

The Engineering Test Facility (ETF) is the major focus of the Department of Energy (DOE) Magnetohydrodynamics (MHD) Program to facilitate commercialization and to demonstrate the commercial operability of MHD/steam electric power. The ETF will be a fully integrated commercial prototype MHD power plant with a nominal output of 200 MW sub e. Performance of this plant is expected to meet or surpass existing utility standards for fuel, maintenance, and operating costs; plant availability; load following; safety; and durability. It is expected to meet all applicable environmental regulations. The current design concept conforming to the general definition, the basis for its selection, and the process which will be followed in further defining and updating the conceptual design.
Exploration Space Suit Architecture: Destination Environmental-Based Technology Development

NASA Technical Reports Server (NTRS)

Hill, Terry R.

2010-01-01

This paper picks up where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars (Hill, Johnson, IEEEAC paper #1209) left off in the development of a space suit architecture that is modular in design and interfaces and could be reconfigured to meet the mission or during any given mission depending on the tasks or destination. This paper will walk though the continued development of a space suit system architecture, and how it should evolve to meeting the future exploration EVA needs of the United States space program. In looking forward to future US space exploration and determining how the work performed to date in the CxP and how this would map to a future space suit architecture with maximum re-use of technology and functionality, a series of thought exercises and analysis have provided a strong indication that the CxP space suit architecture is well postured to provide a viable solution for future exploration missions. Through the destination environmental analysis that is presented in this paper, the modular architecture approach provides the lowest mass, lowest mission cost for the protection of the crew given any human mission outside of low Earth orbit. Some of the studies presented here provide a look and validation of the non-environmental design drivers that will become every-increasingly important the further away from Earth humans venture and the longer they are away. Additionally, the analysis demonstrates a logical clustering of design environments that allows a very focused approach to technology prioritization, development and design that will maximize the return on investment independent of any particular program and provide architecture and design solutions for space suit systems in time or ahead of being required for any particular manned flight program in the future. The new approach to space suit design and interface definition the discussion will show how the architecture is very adaptable to programmatic and funding changes with
An ARM Mobile Facility Designed for Marine Deployments

NASA Astrophysics Data System (ADS)

Wiscombe, W. J.

2007-05-01

The U.S. Dept. of Energy's ARM (Atmospheric Radiation Measurements) Program is designing a Mobile Facility exclusively for marine deployments. This marine facility is patterned after ARM's land Mobile Facility, which had its inaugural deployment at Point Reyes, California, in 2005, followed by deployments to Niger in 2006 and Germany in 2007 (ongoing), and a planned deployment to China in 2008. These facilities are primarily intended for the study of clouds, radiation, aerosols, and surface processes with a goal to include these processes accurately in climate models. They are preferably embedded within larger field campaigns which provide context. They carry extensive instrumentation (in several large containers) including: cloud radar, lidar, microwave radiometers, infrared spectrometers, broadband and narrowband radiometers, sonde-launching facilities, extensive surface aerosol measurements, sky imagers, and surface latent and sensible heat flux devices. ARM's Mobile Facilities are designed for 6-10 month deployments in order to capture climatically-relevant datasets. They are available to any scientist, U.S. or international, who wishes to submit a proposal during the annual Spring call. The marine facility will be adapted to, and ruggedized for, the harsh marine environment and will add a scanning two-frequency radar, a boundary-layer wind profiler, a shortwave spectrometer, and aerosol instrumentation adapted to typical marine aerosols like sea salt. Plans also include the use of roving small UAVs, automated small boats, and undersea autonomous vehicles in order to address the point-to-area-average problem which is so crucial for informing climate models. Initial deployments are planned for small islands in climatically- interesting cloud regimes, followed by deployments on oceanic platforms (like decommissioned oil rigs and the quasi-permanent platform of this session's title) and eventually on large ships like car carriers plying routine routes.
Log transfer and storage facilities in Southeast Alaska: a review.

Treesearch

Tamra L. Faris; Kenneth D. Vaughan

1985-01-01

The volume of timber harvested in southeast Alaska between 1909 and 1983 was 14,689 million board feet; nearly all was transported on water to various destinations for processing. In 1971 there were 69 active log transfer and storage facilities and 38 raft collecting and storage facilities in southeast Alaska. In 1983 there were 90 log transfer sites, 49 log storage...
Earth integrated design: office dormitory facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapira, H. B.; Barnes, P. R.

1980-01-01

The generation process of the design of the Joint Institute for Heavy Ion Research is described. Architectural and energy considerations are discussed. The facility will contain living quarters for guest scientists who come to Oak Ridge to conduct short experiments and sleeping alcoves for local researchers on long experimental shifts as well as office space. (MHR)
Complexity in built environment, health, and destination walking: a neighborhood-scale analysis.

PubMed

Carlson, Cynthia; Aytur, Semra; Gardner, Kevin; Rogers, Shannon

2012-04-01

This study investigates the relationships between the built environment, the physical attributes of the neighborhood, and the residents' perceptions of those attributes. It focuses on destination walking and self-reported health, and does so at the neighborhood scale. The built environment, in particular sidewalks, road connectivity, and proximity of local destinations, correlates with destination walking, and similarly destination walking correlates with physical health. It was found, however, that the built environment and health metrics may not be simply, directly correlated but rather may be correlated through a series of feedback loops that may regulate risk in different ways in different contexts. In particular, evidence for a feedback loop between physical health and destination walking is observed, as well as separate feedback loops between destination walking and objective metrics of the built environment, and destination walking and perception of the built environment. These feedback loops affect the ability to observe how the built environment correlates with residents' physical health. Previous studies have investigated pieces of these associations, but are potentially missing the more complex relationships present. This study proposes a conceptual model describing complex feedback relationships between destination walking and public health, with the built environment expected to increase or decrease the strength of the feedback loop. Evidence supporting these feedback relationships is presented.
14 CFR 135.219 - IFR: Destination airport weather minimums.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false IFR: Destination airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.219 IFR: Destination airport weather... latest weather reports or forecasts, or any combination of them, indicate that weather conditions at the...
14 CFR 135.219 - IFR: Destination airport weather minimums.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false IFR: Destination airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.219 IFR: Destination airport weather... latest weather reports or forecasts, or any combination of them, indicate that weather conditions at the...

14 CFR 135.219 - IFR: Destination airport weather minimums.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false IFR: Destination airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.219 IFR: Destination airport weather... latest weather reports or forecasts, or any combination of them, indicate that weather conditions at the...
14 CFR 135.219 - IFR: Destination airport weather minimums.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false IFR: Destination airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.219 IFR: Destination airport weather... latest weather reports or forecasts, or any combination of them, indicate that weather conditions at the...
14 CFR 135.219 - IFR: Destination airport weather minimums.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false IFR: Destination airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.219 IFR: Destination airport weather... latest weather reports or forecasts, or any combination of them, indicate that weather conditions at the...
Destination memory in Alzheimer's Disease: when I imagine telling Ronald Reagan about Paris.

PubMed

El Haj, Mohamad; Postal, Virginie; Allain, Philippe

2013-01-01

Destination memory refers to remembering the destination of information that people output. This present paper establishes a new distinction between external and internal processes within this memory system for both normal aging and Alzheimer's Disease (AD). Young adults, older adults, and mild AD patients were asked either to tell facts (i.e., external destination memory condition) or to imagine telling facts (i.e., internal destination memory condition) to pictures of famous people. The experiment established three major findings. First, the destination memory performance of the AD patients was significantly poorer than that of older adults, which in turn was poorer than that of the young adults. Furthermore, internal destination processes were more prone to being forgotten than external destination memory processes. In other words, participants had more difficulty in remembering whether they had previously imagined telling the facts to the pictures or not (i.e., imagined condition) than in remembering whether they had previously told the facts to the pictures or not (i.e., enacted condition). Second, significant correlations were detected between performances on destination memory and several executive measures such as the Stroop, the Plus-Minus and the Binding tasks. Third, among the executive measures, regression analyses showed that performance on the Stroop task was a main factor in explaining variance in destination memory performance. Our findings reflect the difficulty in remembering the destination of internally generated information. They also demonstrate the involvement of inhibitory processes in destination memory. Copyright © 2011 Elsevier Ltd. All rights reserved.
40 CFR 61.250 - Designation of facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Designation of facilities. 61.250 Section 61.250 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standards for Radon...
40 CFR 61.20 - Designation of facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Designation of facilities. 61.20 Section 61.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standards for Radon...
40 CFR 61.200 - Designation of facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Designation of facilities. 61.200 Section 61.200 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standards for Radon...
40 CFR 61.220 - Designation of facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Designation of facilities. 61.220 Section 61.220 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standards for Radon...
40 CFR 61.20 - Designation of facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Designation of facilities. 61.20 Section 61.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standards for Radon...
40 CFR 61.250 - Designation of facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Designation of facilities. 61.250 Section 61.250 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standards for Radon...
40 CFR 61.220 - Designation of facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Designation of facilities. 61.220 Section 61.220 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standards for Radon...
40 CFR 61.200 - Designation of facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Designation of facilities. 61.200 Section 61.200 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standards for Radon...
Sandia National Laboratories Facilities Management and Operations Center Design Standards Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Timothy L.

2014-09-01

At Sandia National Laboratories in New Mexico (SNL/NM), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/NM applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. Themore » safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule. These design standards generally apply to all disciplines on all SNL/NM projects. Architectural and engineering design must be both functional and cost-effective. Facility design must be tailored to fit its intended function, while emphasizing low-maintenance, energy-efficient, and energy-conscious design. Design facilities that can be maintained easily, with readily accessible equipment areas, low maintenance, and quality systems. To promote an orderly and efficient appearance, architectural features of new facilities must complement and enhance the existing architecture at the site. As an Architectural and Engineering (A/E) professional, you must advise the Project Manager when this approach is prohibitively expensive. You are encouraged to use professional judgment and ingenuity to produce a coordinated interdisciplinary design that is cost-effective, easily contractible or buildable, high-performing, aesthetically pleasing, and compliant with applicable building codes. Close coordination and development of civil, landscape, structural, architectural
Space power distribution system technology. Volume 3: Test facility design

NASA Technical Reports Server (NTRS)

Decker, D. K.; Cannady, M. D.; Cassinelli, J. E.; Farber, B. F.; Lurie, C.; Fleck, G. W.; Lepisto, J. W.; Messner, A.; Ritterman, P. F.

1983-01-01

The AMPS test facility is a major tool in the attainment of more economical space power. The ultimate goals of the test facility, its primary functional requirements and conceptual design, and the major equipment it contains are discussed.
ETF Facility evaporator skid orifice sizing design analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

ELLINGSON, S.D.

1999-08-31

This document releases and records the design analysis for sizing the Orifice plate being installed on the Effluent Treatment Facility (ETF) evaporator skid per Engineering Change Notice (ECN) 651583.
48 CFR 47.303-7 - F.o.b. destination, within consignee's premises.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false F.o.b. destination, within... REGULATION CONTRACT MANAGEMENT TRANSPORTATION Transportation in Supply Contracts 47.303-7 F.o.b. destination, within consignee's premises. (a) Explanation of delivery term. F.o.b. destination, within consignee's...
40 CFR 60.190 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Aluminum Reduction Plants § 60.190 Applicability and designation of affected facility. (a) The affected facilities in primary aluminum reduction plants to which this subpart applies are...
NASA's Space Launch System: One Vehicle, Many Destinations

NASA Technical Reports Server (NTRS)

May, Todd A.; Creech, Stephen D.

2013-01-01

The National Aeronautics and Space Administration's (NASA) Space Launch System (SLS) Program, managed at the Marshall Space Flight Center, is making progress toward delivering a new capability for exploration beyond Earth orbit (BEO). Developed with the goals of safety, affordability and sustainability in mind, SLS will start with 10 percent more thrust than the Saturn V rocket that launched astronauts to the Moon 40 years ago. From there it will evolve into the most powerful launch vehicle ever flown, via an upgrade approach that will provide building blocks for future space exploration and development. The International Space Exploration Coordination Group, representing 12 of the world's space agencies, has worked together to create the Global Exploration Roadmap, which outlines paths towards a human landing on Mars, beginning with capability-demonstrating missions to the Moon or an asteroid. The Roadmap and corresponding NASA research outline the requirements for reference missions for all three destinations. This paper will explore the requirements needed for missions to BEO destinations, and the capability of SLS to meet those requirements and enable those missions. It will explain how NASA will execute this development within flat budgetary guidelines by using existing engines assets and heritage technology, from the initial 70 metric ton (t) lift capability through a block upgrade approach to an evolved 130-t capability. The SLS will offer a robust way to transport international crews and the air, water, food, and equipment they would need for extended trips to asteroids, the Moon, and Mars. In addition, this paper will detail SLS's capability to support missions beyond the human exploration roadmap, including robotic precursor missions to other worlds or uniquely high-mass space operation facilities in Earth orbit. As this paper will explain, the SLS provides game-changing mass and volume lift capability that makes it enhancing or enabling for a variety of
Natural phenomena hazards design and evaluation criteria for Department of Energy Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-04-01

This DOE standard gives design and evaluation criteria for natural phenomena hazards (NPH) effects as guidance for implementing the NPH mitigation requirements of DOE 5480.28. Goal of the criteria is to assure that DOE facilities can withstand the effects of earthquakes, extreme winds, tornadoes, flooding, etc. They apply to the design of new facilities and the evaluation of existing facilities; they may also be used for modification and upgrading of the latter.
40 CFR 60.170 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Zinc Smelters § 60.170 Applicability and designation of affected facility. (a) The...: roaster and sintering machine. (b) Any facility under paragraph (a) of this section that commences...

Occupational Channels for Mexican Migration: New Destination Formation in a Binational Context

ERIC Educational Resources Information Center

Sanderson, Matthew; Painter, Matthew, II

2011-01-01

In the 1990s, Mexican immigration dispersed spatially, leading to the emergence of many "new destinations," in nonmetropolitan areas of the United States. Previous studies constrain the scope of the analysis to the United States, limiting our understanding of how new destinations are formed. We place new destination formation into a…
Water facilities in retrospect and prospect: An illuminating tool for vehicle design

NASA Technical Reports Server (NTRS)

Erickson, G. E.; Peak, D. J.; Delfrate, J.; Skow, A. M.; Malcolm, G. N.

1986-01-01

Water facilities play a fundamental role in the design of air, ground, and marine vehicles by providing a qualitative, and sometimes quantitative, description of complex flow phenomena. Water tunnels, channels, and tow tanks used as flow-diagnostic tools have experienced a renaissance in recent years in response to the increased complexity of designs suitable for advanced technology vehicles. These vehicles are frequently characterized by large regions of steady and unsteady three-dimensional flow separation and ensuing vortical flows. The visualization and interpretation of the complicated fluid motions about isolated vehicle components and complete configurations in a time and cost effective manner in hydrodynamic test facilities is a key element in the development of flow control concepts, and, hence, improved vehicle designs. A historical perspective of the role of water facilities in the vehicle design process is presented. The application of water facilities to specific aerodynamic and hydrodynamic flow problems is discussed, and the strengths and limitations of these important experimental tools are emphasized.
48 CFR 52.247-35 - F.o.b. Destination, Within Consignee's Premises.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false F.o.b. Destination, Within... Clauses 52.247-35 F.o.b. Destination, Within Consignee's Premises. As prescribed in 47.303-7(c), insert the following clause in solicitations and contracts when the delivery term is f.o.b. destination...
40 CFR 60.420 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Performance for Ammonium Sulfate Manufacture § 60.420 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each ammonium sulfate dryer within an ammonium sulfate manufacturing plant in the caprolactam by-product, synthetic, and coke oven by...
40 CFR 60.420 - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Performance for Ammonium Sulfate Manufacture § 60.420 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each ammonium sulfate dryer within an ammonium sulfate manufacturing plant in the caprolactam by-product, synthetic, and coke oven by...
40 CFR 60.560 - Applicability and designation of affected facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) manufacturing processes. (i) Affected facilities with a design capacity to produce less than 1,000 Mg/yr (1,102... Performance for Volatile Organic Compound (VOC) Emissions from the Polymer Manufacturing Industry § 60.560... apply to affected facilities involved in the manufacture of polypropylene, polyethylene, polystyrene, or...
40 CFR 60.420 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Performance for Ammonium Sulfate Manufacture § 60.420 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each ammonium sulfate dryer within an ammonium sulfate manufacturing plant in the caprolactam by-product, synthetic, and coke oven by...
40 CFR 60.420 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Performance for Ammonium Sulfate Manufacture § 60.420 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each ammonium sulfate dryer within an ammonium sulfate manufacturing plant in the caprolactam by-product, synthetic, and coke oven by...
40 CFR 60.620 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Petroleum Dry Cleaners § 60.620 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities located at a petroleum dry... pounds): Petroleum solvent dry cleaning dryers, washers, filters, stills, and settling tanks. (1) When...
40 CFR 60.500 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Bulk Gasoline Terminals § 60.500 Applicability and designation of affected facility. (a) The... bulk gasoline terminal which deliver liquid product into gasoline tank trucks. (b) Each facility under... technologies (BDT). The numerical emission limits in this standard are expressed in terms of total organic...
40 CFR 60.500 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Performance for Bulk Gasoline Terminals § 60.500 Applicability and designation of affected facility. (a) The... bulk gasoline terminal which deliver liquid product into gasoline tank trucks. (b) Each facility under... technologies (BDT). The numerical emission limits in this standard are expressed in terms of total organic...
Natural phenomena hazards design and evaluation criteria for Department of Energy Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-01-01

The Department of Energy (DOE) has issued an Order 420.1 which establishes policy for its facilities in the event of natural phenomena hazards (NPH) along with associated NPH mitigation requirements. This DOE Standard gives design and evaluation criteria for NPH effects as guidance for implementing the NPH mitigation requirements of DOE Order 420.1 and the associated implementation Guides. These are intended to be consistent design and evaluation criteria for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of these criteria is to assure that DOE facilities can withstand the effects of natural phenomena suchmore » as earthquakes, extreme winds, tornadoes, and flooding. These criteria apply to the design of new facilities and the evaluation of existing facilities. They may also be used for modification and upgrading of existing facilities as appropriate. The design and evaluation criteria presented herein control the level of conservatism introduced in the design/evaluation process such that earthquake, wind, and flood hazards are treated on a consistent basis. These criteria also employ a graded approach to ensure that the level of conservatism and rigor in design/evaluation is appropriate for facility characteristics such as importance, hazards to people on and off site, and threat to the environment. For each natural phenomena hazard covered, these criteria consist of the following: Performance Categories and target performance goals as specified in the DOE Order 420.1 NPH Implementation Guide, and DOE-STD-1 021; specified probability levels from which natural phenomena hazard loading on structures, equipment, and systems is developed; and design and evaluation procedures to evaluate response to NPH loads and criteria to assess whether or not computed response is permissible.« less
A button - type beam position monitor design for TARLA facility

NASA Astrophysics Data System (ADS)

Gündoǧan, M. Tural; Kaya, ć.; Yavaş, Ö.

2016-03-01

Turkish Accelerator and Radiation Laboratory in Ankara (TARLA) facility is proposed as an IR FEL and Bremsstrahlung facility as the first facility of Turkish Accelerator Center (TAC). TARLA is essentially proposed to generate oscillator mode FEL in 3-250 microns wavelengths range, will consist of normal conducting injector system with 250 keV beam energy, two superconducting RF accelerating modules in order to accelerate the beam 15-40 MeV. The TARLA facility is expected to provide two modes, Continuous wave (CW) and pulsed mode. Longitudinal electron bunch length will be changed between 1 and 10 ps. The bunch charge will be limited by 77pC. The design of the Button-type Beam Position Monitor for TARLA IR FEL is studied to operate in 1.3 GHz. Mechanical antenna design and simulations are completed considering electron beam parameters of TARLA. Ansoft HFSS and CST Particle Studio is used to compare with results of simulations.
A performance goal-based seismic design philosophy for waste repository facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hossain, Q.A.

1994-12-31

A performance goal-based seismic design philosophy, compatible with DOE`s present natural phenomena hazards mitigation and {open_quotes}graded approach{close_quotes} philosophy, has been proposed for high level nuclear waste repository facilities. The rationale, evolution, and the desirable features of this method have been described. Why and how the method should and can be applied to the design of a repository facility are also discussed.
Source and destination memory in face-to-face interaction: A multinomial modeling approach.

PubMed

Fischer, Nele M; Schult, Janette C; Steffens, Melanie C

2015-06-01

Arguing that people are often in doubt concerning to whom they have presented what information, Gopie and MacLeod (2009) introduced a new memory component, destination memory: remembering the destination of output information (i.e., "Who did you tell this to?"). They investigated source (i.e., "Who told you that?") versus destination memory in computer-based imagined interactions. The present study investigated destination memory in real interaction situations. In 2 experiments with mixed-gender (N = 53) versus same-gender (N = 89) groups, source and destination memory were manipulated by creating a setup similar to speed dating. In dyads, participants completed phrase fragments with personal information, taking turns. At recognition, participants decided whether fragments were new or old and, if old, whether they were listened to or spoken and which depicted person was the source or the destination of the information. A multinomial model was used for analyses. Source memory significantly exceeded destination memory, whereas information itself was better remembered in the destination than in the source condition. These findings corroborate the trade-off hypothesis: Context is better remembered in input than in output events, but information itself is better remembered in output than in input events. We discuss the implications of these findings for real-world conversation situations. (c) 2015 APA, all rights reserved).
Destination Information System for Bandung City Using Location-Based Services (LBS) on Android

NASA Astrophysics Data System (ADS)

Kurniawan, B.; Pranoto, H.

2018-02-01

Bandung is a city in West Java, Indonesia with many interesting locations to visit. For most favourite destinations, we can easily look for it on Google and we will find some blogs there discussing about related content. The problem is we can not guarantee that the destination is frequented by visitor. In this research, we utilizes an application to help everyone choosing destination frequented by visitor. The use of information technology in the form of picture, maps, and textual on Android application makes it possible for user to have information about destination with its visitor in a period of time. If destination has visit history, selection of proper destination will be given with fresh informations. This application can run well on Android Lollipop (API Level 21) or above with a minimum RAM of 2 GB since it will compare two coordinates for every data. The use of this app make it possible to access information about location with its visitor history and could help choosing proper destinations for the users.
Harold P. Geerdes on Musical Facility Design.

ERIC Educational Resources Information Center

Wagner, Michael

1996-01-01

Presents an interview with Dr. Harold P. Geerdes, world-renowned music facility planner, acoustician, and music professor. Dr. Geerdes discusses the different characteristics of rehearsal spaces and concert halls as well as the importance of interior materials and design. He also provides some easy and inexpensive tips for schools. (MJP)
Anatomy Education in Namibia: Balancing Facility Design and Curriculum Development

ERIC Educational Resources Information Center

Wessels, Quenton; Vorster, Willie; Jacobson, Christian

2012-01-01

The anatomy curriculum at Namibia's first, and currently only, medical school is clinically oriented, outcome-based, and includes all of the components of modern anatomical sciences i.e., histology, embryology, neuroanatomy, gross, and clinical anatomy. The design of the facilities and the equipment incorporated into these facilities were directed…
Defocusing beam line design for an irradiation facility at the TAEA SANAEM Proton Accelerator Facility

NASA Astrophysics Data System (ADS)

Gencer, A.; Demirköz, B.; Efthymiopoulos, I.; Yiğitoğlu, M.

2016-07-01

Electronic components must be tested to ensure reliable performance in high radiation environments such as Hi-Limu LHC and space. We propose a defocusing beam line to perform proton irradiation tests in Turkey. The Turkish Atomic Energy Authority SANAEM Proton Accelerator Facility was inaugurated in May 2012 for radioisotope production. The facility has also an R&D room for research purposes. The accelerator produces protons with 30 MeV kinetic energy and the beam current is variable between 10 μA and 1.2 mA. The beam kinetic energy is suitable for irradiation tests, however the beam current is high and therefore the flux must be lowered. We plan to build a defocusing beam line (DBL) in order to enlarge the beam size, reduce the flux to match the required specifications for the irradiation tests. Current design includes the beam transport and the final focusing magnets to blow up the beam. Scattering foils and a collimator is placed for the reduction of the beam flux. The DBL is designed to provide fluxes between 107 p /cm2 / s and 109 p /cm2 / s for performing irradiation tests in an area of 15.4 cm × 21.5 cm. The facility will be the first irradiation facility of its kind in Turkey.
30 CFR 285.701 - What must I include in my Facility Design Report?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What must I include in my Facility Design Report? 285.701 Section 285.701 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR... Design, Fabrication, and Installation Reports § 285.701 What must I include in my Facility Design Report...

Design of carbon therapy facility based on 10 years experience at HIMAC

NASA Astrophysics Data System (ADS)

Noda, K.; Furukawa, T.; Iwata, Y.; Kanai, T.; Kanazawa, M.; Kanematsu, N.; Kitagawa, A.; Komori, M.; Minohara, S.; Murakami, T.; Muramatsu, M.; Sato, S.; Sato, Y.; Shibuya, S.; Torikoshi, M.; Yamada, S.

2006-06-01

Since 1994, the clinical trial for cancer therapy with HIMAC has successfully progressed, and more than 2100 cancer patients have been treated with a carbon beam. Based on the development of the accelerator and irradiation technologies for 10 years, we have designed a new carbon-therapy facility for widespread use in Japan, and key technologies for the new facility have been developed. We describe the conceptual design of the new facility and the status of development for the key technologies.
Design and Shielding of Radiotherapy Treatment Facilities; IPEM Report 75, 2nd Edition

NASA Astrophysics Data System (ADS)

Horton, Patrick; Eaton, David

2017-07-01

Design and Shielding of Radiotherapy Treatment Facilities provides readers with a single point of reference for protection advice to the construction and modification of radiotherapy facilities. The book assembles a faculty of national and international experts on all modalities including megavoltage and kilovoltage photons, brachytherapy and high-energy particles, and on conventional and Monte Carlo shielding calculations. This book is a comprehensive reference for qualified experts and radiation-shielding designers in radiation physics and also useful to anyone involved in the design of radiotherapy facilities.
Facility Design Considerations.

ERIC Educational Resources Information Center

Chase, William W.

1967-01-01

Increasing need for vocational education under the impetus of federal aid is generating a demand for vocational teaching facilities. Factors to be considered in planning these facilities inclued--(1) site development, (2) program needs, (3) administrative considerations, (4) environmental controls. (5) mechanical systems, and (6) area and space…
The Influence of Older Age Groups to Sustainable Product Design Research of Urban Public Facilities

NASA Astrophysics Data System (ADS)

Wen-juan, Zhang; Hou-peng, Song

2017-01-01

Through summarize the status quo of public facilities design to older age groups in China and a variety of factors what influence on them, the essay, from different perspective, is designed to put forward basic principle to sustainable design of public facilities for the aged in the city, and thus further promote and popularize the necessity of sustainable design applications in the future design of public facilities for elderly people.
The design of components for an advanced Rankine cycle test facility.

NASA Technical Reports Server (NTRS)

Bond, J. A.

1972-01-01

The design of a facility for testing components of an advanced Rankine cycle power system is summarized. The facility is a three-loop system in which lithium, potassium and NaK-78 are the working fluids of the primary, secondary and heat-rejection loops, respectively. Design bases and performance predictions for the major loop components, including the lithium heater and the potassium boiler, condenser and preheater, are outlined.
40 CFR 60.40 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... for Fossil-Fuel-Fired Steam Generators § 60.40 Applicability and designation of affected facility. (a) The affected facilities to which the provisions of this subpart apply are: (1) Each fossil-fuel-fired... per hour (MMBtu/hr)). (2) Each fossil-fuel and wood-residue-fired steam generating unit capable of...
40 CFR 60.40 - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... for Fossil-Fuel-Fired Steam Generators § 60.40 Applicability and designation of affected facility. (a) The affected facilities to which the provisions of this subpart apply are: (1) Each fossil-fuel-fired... per hour (MMBtu/hr)). (2) Each fossil-fuel and wood-residue-fired steam generating unit capable of...
40 CFR 60.40 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... for Fossil-Fuel-Fired Steam Generators § 60.40 Applicability and designation of affected facility. (a) The affected facilities to which the provisions of this subpart apply are: (1) Each fossil-fuel-fired... per hour (MMBtu/hr)). (2) Each fossil-fuel and wood-residue-fired steam generating unit capable of...
Medical Tourist's Perception in Selecting their Destination: A Global Perspective.

PubMed

Sarwar, Abdullah Am; Manaf, Noorhazilah A; Omar, Azura

2012-01-01

The need for better healthcare has grown significantly in recent years. In addition, the rising healthcare costs in the U.S. and in many European countries have forced many patients to seek medical treatment abroad, which has created the demand for medical tourism. With little yet known as to the perception of a medical tourist's destination selection, this study aims to explore medical tourist's perception in selecting their destination while going for medical treatment. Realizing the current need to examine closely the perception of medical tourists, this study had conducted a secondary study to collect data for assessing and identification of the key factors on patient's perception and destination selection criteria. The result confirms the existence of a very strong relationship between cost, service quality, treatment types and availability and marketing impact on the perception of the medical tourists' in selecting their medical tourism destination. This study offers support for the proposed conceptual model and an empirical basis for comparison in future research.
40 CFR 60.340 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Lime Manufacturing Plants § 60.340 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to each rotary lime kiln used in the manufacture of lime. (b) The provisions of this subpart are not applicable to facilities used in the manufacture of lime at kraft pulp...
40 CFR 60.530 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Performance for New Residential Wood Heaters § 60.530 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each wood heater manufactured... do not apply to wood heaters constructed prior to July 1, 1988, that are or have been owned by a...
40 CFR 60.530 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Performance for New Residential Wood Heaters § 60.530 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each wood heater manufactured... do not apply to wood heaters constructed prior to July 1, 1988, that are or have been owned by a...
40 CFR 60.530 - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Performance for New Residential Wood Heaters § 60.530 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each wood heater manufactured... do not apply to wood heaters constructed prior to July 1, 1988, that are or have been owned by a...
40 CFR 60.530 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for New Residential Wood Heaters § 60.530 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each wood heater manufactured... do not apply to wood heaters constructed prior to July 1, 1988, that are or have been owned by a...
40 CFR 60.530 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Performance for New Residential Wood Heaters § 60.530 Applicability and designation of affected facility. (a) The affected facility to which the provisions of this subpart apply is each wood heater manufactured... do not apply to wood heaters constructed prior to July 1, 1988, that are or have been owned by a...
Diaspora engagement of African migrant health workers – examples from five destination countries

PubMed Central

Wojczewski, Silvia; Poppe, Annelien; Hoffmann, Kathryn; Peersman, Wim; Nkomazana, Oathokwa; Pentz, Stephen; Kutalek, Ruth

2015-01-01

Background Migrant health workers fill care gaps in their destination countries, but they also actively engage in improving living conditions for people of their countries of origin through expatriate professional networks. This paper aims to explore the professional links that migrant health workers from sub-Saharan African countries living in five African and European destinations (Botswana, South Africa, Belgium, Austria, and the United Kingdom) have to their countries of origin. Design Qualitative interviews were conducted with migrant doctors, nurses, and midwives from sub-Saharan Africa (N=66). A qualitative content analysis of the material was performed using the software ATLAS.ti. Results Almost all migrant health workers have professional ties with their countries of origin supporting health, education, and social structures. They work with non-governmental organizations, universities, or hospitals and travel back and forth between their destination country and country of origin. For a few respondents, professional engagement or even maintaining private contacts in their country of origin is difficult due to the political situation at home. Conclusions The results show that African migrant health workers are actively engaged in improving living conditions not only for their family members but also for the population in general in their countries of origin. Our respondents are mediators and active networkers in a globalized and transnationally connected world. The research suggests that the governments of these countries of origin could strategically use their migrant health workforce for improving education and population health in sub-Saharan Africa. Destination countries should be reminded of their need to comply with the WHO Global Code of Practice for the international recruitment of health professionals. PMID:26652910
International students' image of rural Pennsylvania as a travel destination

Treesearch

Po-Ju Chen; Deborah L. Kerstetter

1998-01-01

The purpose of this study was to examine the image international students at Penn State have of rural travel destinations in the state of Pennsylvania. In addition, this study investigated whether destination image differed depending upon travel behavior and socio-demographic variables. Four distinct image dimensions, "tourism infrastructure," "...
Computational Tools and Facilities for the Next-Generation Analysis and Design Environment

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

1997-01-01

This document contains presentations from the joint UVA/NASA Workshop on Computational Tools and Facilities for the Next-Generation Analysis and Design Environment held at the Virginia Consortium of Engineering and Science Universities in Hampton, Virginia on September 17-18, 1996. The presentations focused on the computational tools and facilities for analysis and design of engineering systems, including, real-time simulations, immersive systems, collaborative engineering environment, Web-based tools and interactive media for technical training. Workshop attendees represented NASA, commercial software developers, the aerospace industry, government labs, and academia. The workshop objectives were to assess the level of maturity of a number of computational tools and facilities and their potential for application to the next-generation integrated design environment.
23 CFR 810.108 - Designation of existing facilities.

Code of Federal Regulations, 2010 CFR

2010-04-01

....108 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PUBLIC TRANSPORTATION MASS TRANSIT AND SPECIAL USE HIGHWAY PROJECTS Highway Public Transportation Projects and Special Use Highway... designate existing parking facilities (such as at shopping centers or other public or private locations) for...
Lead Coolant Test Facility Systems Design, Thermal Hydraulic Analysis and Cost Estimate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soli Khericha; Edwin Harvego; John Svoboda

2012-01-01

The Idaho National Laboratory prepared a preliminary technical and functional requirements (T&FR), thermal hydraulic design and cost estimate for a lead coolant test facility. The purpose of this small scale facility is to simulate lead coolant fast reactor (LFR) coolant flow in an open lattice geometry core using seven electrical rods and liquid lead or lead-bismuth eutectic coolant. Based on review of current world lead or lead-bismuth test facilities and research needs listed in the Generation IV Roadmap, five broad areas of requirements were identified as listed: (1) Develop and Demonstrate Feasibility of Submerged Heat Exchanger; (2) Develop and Demonstratemore » Open-lattice Flow in Electrically Heated Core; (3) Develop and Demonstrate Chemistry Control; (4) Demonstrate Safe Operation; and (5) Provision for Future Testing. This paper discusses the preliminary design of systems, thermal hydraulic analysis, and simplified cost estimate. The facility thermal hydraulic design is based on the maximum simulated core power using seven electrical heater rods of 420 kW; average linear heat generation rate of 300 W/cm. The core inlet temperature for liquid lead or Pb/Bi eutectic is 4200 C. The design includes approximately seventy-five data measurements such as pressure, temperature, and flow rates. The preliminary estimated cost of construction of the facility is $3.7M (in 2006 $). It is also estimated that the facility will require two years to be constructed and ready for operation.« less

Curiosity Destinations for Second Extended Mission

NASA Image and Video Library

2016-10-03

This map shows the route driven by NASA's Curiosity Mars rover from the location where it landed in August 2012 to its location in September 2016 at "Murray Buttes," and the path planned for reaching destinations at "Hematite Unit" and "Clay Unit" on lower Mount Sharp. Blue triangles mark waypoints investigated by Curiosity during the rover's two-year prime mission and first two-year extended mission. The Hematite Unit and Clay Unit are key destinations for the second two-year extension, through September 2018. The base image for the map is from the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. North is up. Bagnold Dunes form a band of dark, wind-blown material at the foot of Mount Sharp. http://photojournal.jpl.nasa.gov/catalog/PIA20846
Man-Vehicle Systems Research Facility - Design and operating characteristics

NASA Technical Reports Server (NTRS)

Shiner, Robert J.; Sullivan, Barry T.

1992-01-01

This paper describes the full-mission flight simulation facility at the NASA Ames Research Center. The Man-Vehicle Systems Research Facility (MVSRF) supports aeronautical human factors research and consists of two full-mission flight simulators and an air-traffic-control simulator. The facility is used for a broad range of human factors research in both conventional and advanced aviation systems. The objectives of the research are to improve the understanding of the causes and effects of human errors in aviation operations, and to limit their occurrence. The facility is used to: (1) develop fundamental analytical expressions of the functional performance characteristics of aircraft flight crews; (2) formulate principles and design criteria for aviation environments; (3) evaluate the integration of subsystems in contemporary flight and air traffic control scenarios; and (4) develop training and simulation technologies.
Hispanic Concentrated Poverty in Traditional and New Destinations, 2010-2014.

PubMed

Ludwig-Dehm, Sarah; Iceland, John

2017-12-01

This paper examines patterns of Hispanic concentrated poverty in traditional, new, and minor destinations. Using data from 2010 to 2014 from the American Community Survey, we find that without controlling for group characteristics, Hispanics experience a lower level of concentrated poverty in new destinations compared to traditional gateways. Metropolitan level factors explain this difference, including ethnic residential segregation, the Hispanic poverty rate, and the percentage of Hispanics who are foreign born. Overall, this study sheds new light on the Hispanic geographic dispersal in the United States and offers support for the argument that the Hispanic settlement into new destinations is associated with lower levels of concentrated poverty.
Conceptual design for the Space Station Freedom fluid physics/dynamics facility

NASA Technical Reports Server (NTRS)

Thompson, Robert L.; Chucksa, Ronald J.; Omalley, Terence F.; Oeftering, Richard C.

1993-01-01

A study team at NASA's Lewis Research Center has been working on a definition study and conceptual design for a fluid physics and dynamics science facility that will be located in the Space Station Freedom's baseline U.S. Laboratory module. This modular, user-friendly facility, called the Fluid Physics/Dynamics Facility, will be available for use by industry, academic, and government research communities in the late 1990's. The Facility will support research experiments dealing with the study of fluid physics and dynamics phenomena. Because of the lack of gravity-induced convection, research into the mechanisms of fluids in the absence of gravity will help to provide a better understanding of the fundamentals of fluid processes. This document has been prepared as a final version of the handout for reviewers at the Fluid Physics/Dynamics Facility Assessment Workshop held at Lewis on January 24 and 25, 1990. It covers the background, current status, and future activities of the Lewis Project Study Team effort. It is a revised and updated version of a document entitled 'Status Report on the Conceptual Design for the Space Station Fluid Physics/Dynamics Facility', dated January 1990.
Design handbook : energy efficiency and water conservation in NAS facilities

DOT National Transportation Integrated Search

1997-09-30

This handbook was created to provide definitive energy efficiency and water conservation design criteria for the design of NAS facilities. FAA-HDBK-001 provides implementation strategies and tools to comply with E.O. 12902, Energy and Water Conservat...
Organizing English Learner Instruction in New Immigrant Destinations: District Infrastructure and Subject-Specific School Practice

ERIC Educational Resources Information Center

Hopkins, Megan; Lowenhaupt, Rebecca; Sweet, Tracy M.

2015-01-01

In the context of shifting demographics and standards-based reform, school districts in new immigrant destinations are charged with designing infrastructures that support teaching and learning for English learners (ELs) in core academic subjects. This article uses qualitative data and social network analysis to examine how one district in the…
Literature Related to Planning, Design and Construction of Science Facilities.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC.

A list of the articles and papers in the science facilities collection of the Architectural Services Staff is presented. It has been prepared to serve as a bibliography that may be useful to persons searching for data on the design of science facilities, and as a means of informing such persons of the material available for reference in the…
14 CFR 125.367 - Alternate airport for destination: IFR or over-the-top.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Alternate airport for destination: IFR or... Flight Release Rules § 125.367 Alternate airport for destination: IFR or over-the-top. (a) Except as... over-the-top shall list at least one alternate airport for each destination airport in the flight...
14 CFR 125.367 - Alternate airport for destination: IFR or over-the-top.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Alternate airport for destination: IFR or... Flight Release Rules § 125.367 Alternate airport for destination: IFR or over-the-top. (a) Except as... over-the-top shall list at least one alternate airport for each destination airport in the flight...
14 CFR 125.367 - Alternate airport for destination: IFR or over-the-top.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Alternate airport for destination: IFR or... Flight Release Rules § 125.367 Alternate airport for destination: IFR or over-the-top. (a) Except as... over-the-top shall list at least one alternate airport for each destination airport in the flight...
14 CFR 125.367 - Alternate airport for destination: IFR or over-the-top.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Alternate airport for destination: IFR or... Flight Release Rules § 125.367 Alternate airport for destination: IFR or over-the-top. (a) Except as... over-the-top shall list at least one alternate airport for each destination airport in the flight...
14 CFR 125.367 - Alternate airport for destination: IFR or over-the-top.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Alternate airport for destination: IFR or... Flight Release Rules § 125.367 Alternate airport for destination: IFR or over-the-top. (a) Except as... over-the-top shall list at least one alternate airport for each destination airport in the flight...
Prediction of destination entry and retrieval times using keystroke-level models

DOT National Transportation Integrated Search

1998-04-01

Thirty-six drivers entered and retrieved destinations using an Ali-Scout navigation computer. Retrieval involved keying in part of the destination name, scrolling through a list of names, or a combination of those methods. Entry required keying in th...
jsc2018m000321_Destination_Station-MP4

NASA Image and Video Library

2018-05-11

Destination Station---- When you can’t come to the International Space Station, the essence of the space station can come to you! Beginning May 15, Destination Station arrives in Salt Lake City, UT to share the impacts of the station on our daily lives. Here’s a peek at some of the ways you can learn more about what the International Space Station is doing right now. ___________________________ FOLLOW THE SPACE STATION! Twitter: https://twitter.com/Space_Station Facebook: https://www.facebook.com/ISS Instagram: https://instagram.com/iss/
Family and Consumer Sciences: A Facility Planning and Design Guide for School Systems.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

This document presents design concepts and considerations for planning and developing middle and high school family and consumer sciences education facilities. It includes discussions on family and consumer sciences education trends and the facility planning process. Design concepts explore multipurpose laboratories and spaces for food/nutrition…
Country Image and the Study Abroad Destination Choice of Students from Mainland China

ERIC Educational Resources Information Center

Ghazarian, Peter G.

2016-01-01

In this study, the author focuses on the issue of country image in destination choice. To examine the relationship between these two variables, the study tests whether mainland Chinese who favor a destination as their ideal first choice for study abroad have a significantly more positive view of that destination's country image than their…
Destinations matter: The association between where older adults live and their travel behavior.

PubMed

Chudyk, Anna M; Winters, Meghan; Moniruzzaman, Md; Ashe, Maureen C; Gould, Joanie Sims; McKay, Heather

2015-03-01

The positive effect of physical activity in the prevention and treatment of many chronic diseases and age-related disabilities, such as mobility-disability, are widely accepted. Mobility is broadly defined as the ability of individuals to move themselves within community environments. These two concepts -physical activity and mobility - are closely linked and together contribute to older adults living healthy, independent lives. Neighborhood destinations may encourage mobility, as older adults typically leave their homes to travel to specific destinations. Thus, neighborhoods with a high prevalence of destinations may provide older adults an attractive opportunity to walk, instead of drive, and thereby obtain incidental physical activity. We know surprisingly little about the specific types of destinations older adults deem relevant and even less about destinations that support the mobility of older adults with low income. Accessible neighborhood destinations may be especially important to older adults with low income as they are more likely to walk as a primary travel mode. Conversely, this population may also be at increased risk of functional impairments that negatively affect their ability to walk. As a means to fill this information gap we aimed to better understand the mobility habits of older adults with low income. Thus, our specific objectives were to: (1) describe the types of destinations older adults with low income most commonly travel to in one week; and (2) determine the association between the prevalence of neighborhood destinations and the number of transportation walking trips these individuals make (average per day). We conducted a cross-sectional study of community-dwelling older adults with low income residing within Metro Vancouver, Canada. We assessed participant travel behavior (frequency, purpose, mode, destination) using seven-day travel diaries and measured the prevalence of neighborhood destinations using the Street Smart Walk Score. We
Design of a Facility to Test the Advanced Stirling Radioisotope Generator Engineering Unit

NASA Technical Reports Server (NTRS)

Lewandowski, Edward J.; Schreiber, Jeffrey G.; Oriti, Salvatore M.; Meer, David W.; Brace, Michael H.; Dugala, Gina

2010-01-01

The Advanced Stirling Radioisotope Generator (ASRG), a high efficiency generator, is being considered for space missions. An engineering unit, the ASRG engineering unit (EU), was designed and fabricated by Lockheed Martin under contract to the Department of Energy. This unit is currently under extended operation test at the NASA Glenn Research Center (GRC) to generate performance data and validate the life and reliability predictions for the generator and the Stirling convertors. A special test facility was designed and built for the ASRG EU. This paper summarizes details of the test facility design, including the mechanical mounting, heat-rejection system, argon system, control systems, and maintenance. The effort proceeded from requirements definition through design, analysis, build, and test. Initial testing and facility performance results are discussed.
Conceptual design for the space station Freedom modular combustion facility

NASA Technical Reports Server (NTRS)

1989-01-01

A definition study and conceptual design for a combustion science facility that will be located in the Space Station Freedom's baseline U.S. Laboratory module is being performed. This modular, user-friendly facility, called the Modular Combustion Facility, will be available for use by industry, academic, and government research communities in the mid-1990's. The Facility will support research experiments dealing with the study of combustion and its byproducts. Because of the lack of gravity-induced convection, research into the mechanisms of combustion in the absence of gravity will help to provide a better understanding of the fundamentals of the combustion process. The background, current status, and future activities of the effort are covered.
A comparative analysis of high-speed rail station development into destination and multi-use facilities : the case of San Jose Diridon [summary].

DOT National Transportation Integrated Search

2017-02-01

The authors reviewed the literature on planning intermodal transit facilities, extracting recommendations about station and station-area design and land uses, operation of transportation services, and policy actions for station-area planning. They al...

LSST summit facility construction progress report: reacting to design refinements and field conditions

NASA Astrophysics Data System (ADS)

Barr, Jeffrey D.; Gressler, William; Sebag, Jacques; Seriche, Jaime; Serrano, Eduardo

2016-07-01

The civil work, site infrastructure and buildings for the summit facility of the Large Synoptic Survey Telescope (LSST) are among the first major elements that need to be designed, bid and constructed to support the subsequent integration of the dome, telescope, optics, camera and supporting systems. As the contracts for those other major subsystems now move forward under the management of the LSST Telescope and Site (T and S) team, there has been inevitable and beneficial evolution in their designs, which has resulted in significant modifications to the facility and infrastructure. The earliest design requirements for the LSST summit facility were first documented in 2005, its contracted full design was initiated in 2010, and construction began in January, 2015. During that entire development period, and extending now roughly halfway through construction, there continue to be necessary modifications to the facility design resulting from the refinement of interfaces to other major elements of the LSST project and now, during construction, due to unanticipated field conditions. Changes from evolving interfaces have principally involved the telescope mount, the dome and mirror handling/coating facilities which have included significant variations in mass, dimensions, heat loads and anchorage conditions. Modifications related to field conditions have included specifying and testing alternative methods of excavation and contending with the lack of competent rock substrate where it was predicted to be. While these and other necessary changes are somewhat specific to the LSST project and site, they also exemplify inherent challenges related to the typical timeline for the design and construction of astronomical observatory support facilities relative to the overall development of the project.
Modelling Pedestrian Travel Time and the Design of Facilities: A Queuing Approach

PubMed Central

Rahman, Khalidur; Abdul Ghani, Noraida; Abdulbasah Kamil, Anton; Mustafa, Adli; Kabir Chowdhury, Md. Ahmed

2013-01-01

Pedestrian movements are the consequence of several complex and stochastic facts. The modelling of pedestrian movements and the ability to predict the travel time are useful for evaluating the performance of a pedestrian facility. However, only a few studies can be found that incorporate the design of the facility, local pedestrian body dimensions, the delay experienced by the pedestrians, and level of service to the pedestrian movements. In this paper, a queuing based analytical model is developed as a function of relevant determinants and functional factors to predict the travel time on pedestrian facilities. The model can be used to assess the overall serving rate or performance of a facility layout and correlate it to the level of service that is possible to provide the pedestrians. It has also the ability to provide a clear suggestion on the designing and sizing of pedestrian facilities. The model is empirically validated and is found to be a robust tool to understand how well a particular walking facility makes possible comfort and convenient pedestrian movements. The sensitivity analysis is also performed to see the impact of some crucial parameters of the developed model on the performance of pedestrian facilities. PMID:23691055
40 CFR 60.370 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Applicability and designation of affected facility. 60.370 Section 60.370 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Lead-Acid Battery Manufacturing Plants § 60.370 Applicability and designation of affected...
Destinations matter: The association between where older adults live and their travel behavior

PubMed Central

Chudyk, Anna M.; Winters, Meghan; Moniruzzaman, Md; Ashe, Maureen C.; Gould, Joanie Sims; McKay, Heather

2016-01-01

The positive effect of physical activity in the prevention and treatment of many chronic diseases and age-related disabilities, such as mobility-disability, are widely accepted. Mobility is broadly defined as the ability of individuals to move themselves within community environments. These two concepts –physical activity and mobility – are closely linked and together contribute to older adults living healthy, independent lives. Neighborhood destinations may encourage mobility, as older adults typically leave their homes to travel to specific destinations. Thus, neighborhoods with a high prevalence of destinations may provide older adults an attractive opportunity to walk, instead of drive, and thereby obtain incidental physical activity. We know surprisingly little about the specific types of destinations older adults deem relevant and even less about destinations that support the mobility of older adults with low income. Accessible neighborhood destinations may be especially important to older adults with low income as they are more likely to walk as a primary travel mode. Conversely, this population may also be at increased risk of functional impairments that negatively affect their ability to walk. As a means to fill this information gap we aimed to better understand the mobility habits of older adults with low income. Thus, our specific objectives were to: (1) describe the types of destinations older adults with low income most commonly travel to in one week; and (2) determine the association between the prevalence of neighborhood destinations and the number of transportation walking trips these individuals make (average per day). We conducted a cross-sectional study of community-dwelling older adults with low income residing within Metro Vancouver, Canada. We assessed participant travel behavior (frequency, purpose, mode, destination) using seven-day travel diaries and measured the prevalence of neighborhood destinations using the Street Smart Walk Score
Understanding facilities design parameters for a remanufacturing system

NASA Astrophysics Data System (ADS)

Topcu, Aysegul; Cullinane, Thomas

2005-11-01

Remanufacturing is rapidly becoming a very important element in the economies of the world. Products such as washing machines, clothes driers, automobile parts, cell phones and a wide range of consumer durable goods are being reclaimed and sent through processes that restore these products to levels of operating performance that are as good or better than their new product performance. The operations involved in the remanufacturing process add several new dimensions to the work that must be performed. Disassembly is an operation that rarely appears on the operations chart of a typical production facility. The inspection and test functions in remanufacturing most often involve several more tasks than those involved in the first time manufacturing cycle. A close evaluation of most any remanufacturing operation reveals several points in the process in which parts must be cleaned, tested and stored. Although several researchers have focused their work on optimizing the disassembly function and the inspection, test and store functions, very little research has been devoted to studying the impact of the facilities design on the effectiveness of the remanufacturing process. The purpose of this paper will be to delineate the differences between first time manufacturing operations and remanufacturing operations for durable goods and to identify the features of the facilities design that must be considered if the remanufacturing operations are to be effective.
Ethical challenges with the left ventricular assist device as a destination therapy

PubMed Central

Rizzieri, Aaron G; Verheijde, Joseph L; Rady, Mohamed Y; McGregor, Joan L

2008-01-01

The left ventricular assist device was originally designed to be surgically implanted as a bridge to transplantation for patients with chronic end-stage heart failure. On the basis of the REMATCH trial, the US Food and Drug Administration and the US Centers for Medicare & Medicaid Services approved permanent implantation of the left ventricular assist device as a destination therapy in Medicare beneficiaries who are not candidates for heart transplantation. The use of the left ventricular assist device as a destination therapy raises certain ethical challenges. Left ventricular assist devices can prolong the survival of average recipients compared with optimal medical management of chronic end-stage heart failure. However, the overall quality of life can be adversely affected in some recipients because of serious infections, neurologic complications, and device malfunction. Left ventricular assist devices alter end-of-life trajectories. The caregivers of recipients may experience significant burden (e.g., poor physical health, depression, anxiety, and posttraumatic stress disorder) from destination therapy with left ventricular assist devices. There are also social and financial ramifications for recipients and their families. We advocate early utilization of a palliative care approach and outline prerequisite conditions so that consenting for the use of a left ventricular assist device as a destination therapy is a well informed process. These conditions include: (1) direct participation of a multidisciplinary care team, including palliative care specialists, (2) a concise plan of care for anticipated device-related complications, (3) careful surveillance and counseling for caregiver burden, (4) advance-care planning for anticipated end-of-life trajectories and timing of device deactivation, and (5) a plan to address the long-term financial burden on patients, families, and caregivers. Short-term mechanical circulatory devices (e.g. percutaneous cardiopulmonary
Mortality monitoring design for utility-scale solar power facilities

USGS Publications Warehouse

Huso, Manuela; Dietsch, Thomas; Nicolai, Chris

2016-05-27

IntroductionSolar power represents an important and rapidly expanding component of the renewable energy portfolio of the United States (Lovich and Ennen, 2011; Hernandez and others, 2014). Understanding the impacts of renewable energy development on wildlife is a priority for the U.S. Fish and Wildlife Service (FWS) in compliance with Department of Interior Order No. 3285 (U.S. Department of the Interior, 2009) to “develop best management practices for renewable energy and transmission projects on the public lands to ensure the most environmentally responsible development and delivery of renewable energy.” Recent studies examining effects of renewable energy development on mortality of migratory birds have primarily focused on wind energy (California Energy Commission and California Department of Fish and Game, 2007), and in 2012 the FWS published guidance for addressing wildlife conservation concerns at all stages of land-based wind energy development (U.S. Fish and Wildlife Service, 2012). As yet, no similar guidelines exist for solar development, and no published studies have directly addressed the methodology needed to accurately estimate mortality of birds and bats at solar facilities. In the absence of such guidelines, ad hoc methodologies applied to solar energy projects may lead to estimates of wildlife mortality rates that are insufficiently accurate and precise to meaningfully inform conversations regarding unintended consequences of this energy source and management decisions to mitigate impacts. Although significant advances in monitoring protocols for wind facilities have been made in recent years, there remains a need to provide consistent guidance and study design to quantify mortality of bats, and resident and migrating birds at solar power facilities (Walston and others, 2015).In this document, we suggest methods for mortality monitoring at solar facilities that are based on current methods used at wind power facilities but adapted for the
Personal values, subjective well-being and destination-loyalty intention of international students.

PubMed

Jamaludin, N L; Sam, D L; Sandal, G M; Adam, A A

2016-01-01

What are the factors that predict international students' destination-loyalty intention? This is the main question this paper addresses, using an online survey among 396 (short-term, N = 182) and (long-term, N = 214) international students at a Norwegian university. Structural equation model-AMOS was conducted to examine relationships among personal values, subjective well-being and destination-loyalty intentions. The results showed that: (1) universalism was positively related to subjective well-being for short-term students; and (2) subjective well-being was positively related to destination-loyalty intention for all groups. We found that relatively stable and happy individuals might be important for ensuring destination-loyalty intentions. Results also indicated that personal values that emphasize justice and equity are also important for short-term international students' well-being.
Planning and Designing School Computer Facilities. Interim Report.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Finance and Administration Div.

This publication provides suggestions and considerations that may be useful for school jurisdictions developing facilities for computers in schools. An interim report for both use and review, it is intended to assist school system planners in clarifying the specifications needed by the architects, other design consultants, and purchasers involved.…
Concept design theory and model for multi-use space facilities: Analysis of key system design parameters through variance of mission requirements

NASA Astrophysics Data System (ADS)

Reynerson, Charles Martin

This research has been performed to create concept design and economic feasibility data for space business parks. A space business park is a commercially run multi-use space station facility designed for use by a wide variety of customers. Both space hardware and crew are considered as revenue producing payloads. Examples of commercial markets may include biological and materials research, processing, and production, space tourism habitats, and satellite maintenance and resupply depots. This research develops a design methodology and an analytical tool to create feasible preliminary design information for space business parks. The design tool is validated against a number of real facility designs. Appropriate model variables are adjusted to ensure that statistical approximations are valid for subsequent analyses. The tool is used to analyze the effect of various payload requirements on the size, weight and power of the facility. The approach for the analytical tool was to input potential payloads as simple requirements, such as volume, weight, power, crew size, and endurance. In creating the theory, basic principles are used and combined with parametric estimation of data when necessary. Key system parameters are identified for overall system design. Typical ranges for these key parameters are identified based on real human spaceflight systems. To connect the economics to design, a life-cycle cost model is created based upon facility mass. This rough cost model estimates potential return on investments, initial investment requirements and number of years to return on the initial investment. Example cases are analyzed for both performance and cost driven requirements for space hotels, microgravity processing facilities, and multi-use facilities. In combining both engineering and economic models, a design-to-cost methodology is created for more accurately estimating the commercial viability for multiple space business park markets.
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE): Conceptual Design Report. Volume 3: Long-Baseline Neutrino Facility for DUNE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strait, James; McCluskey, Elaine; Lundin, Tracy

2016-01-21

This volume of the LBNF/DUNE Conceptual Design Report covers the Long-Baseline Neutrino Facility for DUNE and describes the LBNF Project, which includes design and construction of the beamline at Fermilab, the conventional facilities at both Fermilab and SURF, and the cryostat and cryogenics infrastructure required for the DUNE far detector.
Evaluating the Effectiveness of NASA's Destination Tomorrow(Trademark) 2000-2001 Program

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Perry, Jeannine

2002-01-01

NASA's Destination Tomorrow(trademark) series consists of 30-minute educational television programs that focus on NASA research, past, present, and future and are designed for educators, parents, and adult (lifelong) learners. Programs in this award-winning series follow a magazine style format with segments ranging from 3-5 minutes to 6-8 minutes. An associated web site provides summaries of stories and links to related program material. The development of the programs is based on educational theory, principles, and research as they pertain to how adults learn and apply knowledge. The five programs in the 2000-2001 season were produced in English and dubbed in Spanish. Telephone interviews with managers of cable access television stations were conducted in January 2002. NASA's Destination Tomorrow(trademark) interviewees reported that (1) from a programming standpoint, the most appealing aspects of the series are its production quality and educational value, (2) programs in the series are 'better than average' when compared to other education programming, (3) the programs are very credible, (4) the programs are successful in educating people about what NASA does, and (5) the programs have been 'very well received' by their audiences.
Results of a Television Station Managers' Telephone Survey of NASA's Destination Tomorrow(Trademark)

NASA Technical Reports Server (NTRS)

Endo, Scott; Pinelli, Thomas E.; Caton, Randall H.

2005-01-01

We conducted a television station managers' telephone survey concerning NASA's Destination Tomorrow. On a 10-point scale, survey participants rated the overall technical quality of NASA's Destination Tomorrow highly (mean = 9.48), and the educational value of the series slightly more highly (mean = 9.56). Ninety one percent of the participants reported that the technical quality of NASA's Destination Tomorrow was higher compared to other educational programming that airs on their station. Most stations (81 percent) indicated that NASA's Destination Tomorrow was well received by their audiences, and 97 percent indicated that they had recommended or would recommend the series to a colleague. Lastly, using a 10-point scale, survey participants indicated that (1) the series successfully educates people about what NASA does (mean = 9.23), (2) the information contained in NASA's Destination Tomorrow is credible (mean = 9.53), and (3) the series is successful in educating the public about what NASA does (mean = 9.23).
Conceptualization and design of a variable-gravity research facility

NASA Technical Reports Server (NTRS)

1987-01-01

The goal is to provide facilities for the study of the effects of variable-gravity levels in reducing the physiological stresses upon the humans of long-term stay time in zero-g. The designs studied include: twin-tethered two module system with a central despun module with docking port and winch gear; and rigid arm tube facility using shuttle external tanks. Topics examined included: despun central capsule configuration, docking clearances, EVA requirements, crew selection, crew scheduling, food supply and preparation, waste handling, leisure use, biomedical issues, and psycho-social issues.
30 CFR 285.707 - What are the CVA's primary duties for facility design review?

Code of Federal Regulations, 2010 CFR

2010-07-01

... design review? 285.707 Section 285.707 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Facility Design, Fabrication, and Installation Certified Verification Agent § 285.707 What are the CVA's...
"Forget to whom you have told this proverb": directed forgetting of destination memory in Alzheimer's disease.

PubMed

El Haj, Mohamad; Gandolphe, Marie-Charlotte; Allain, Philippe; Fasotti, Luciano; Antoine, Pascal

2015-01-01

Destination memory is the ability to remember the receiver of transmitted information. By means of a destination memory directed forgetting task, we investigated whether participants with Alzheimer's Disease (AD) were able to suppress irrelevant information in destination memory. Twenty-six AD participants and 30 healthy elderly subjects were asked to tell 10 different proverbs to 10 different celebrities (List 1). Afterwards, half of the participants were instructed to forget the destinations (i.e., the celebrities) whereas the other half were asked to keep them in mind. After telling 10 other proverbs to 10 other celebrities (List 2), participants were asked to read numbers aloud. Subsequently, all the participants were asked to remember the destinations of List 1 and List 2, regardless of the forget or remember instructions. The results show similar destination memory in AD participants who were asked to forget the destinations of List 1 and those who were asked to retain them. These findings are attributed to inhibitory deficits, by which AD participants have difficulties to suppress irrelevant information in destination memory.
Social Disorganization in New Latino Destinations?

ERIC Educational Resources Information Center

Crowley, Martha; Lichter, Daniel T.

2009-01-01

Rural industrial restructuring, including growth in meat processing and other nondurable manufacturing, has generated employment opportunities that have attracted Latino in migrants to new nonmetropolitan destinations. Long-time residents, however, are not always receptive. While some observers point to economic and social benefits of a Latino…
Design and evaluation guidelines for Department of Energy facilities subjected to natural phenomena hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kennedy, R.P.; Short, S.A.; McDonald, J.R.

1990-06-01

The Department of Energy (DOE) and the DOE Natural Phenomena Hazards Panel have developed uniform design and evaluation guidelines for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of the guidelines is to assure that DOE facilities can withstand the effects of natural phenomena such as earthquakes, extreme winds, tornadoes, and flooding. The guidelines apply to both new facilities (design) and existing facilities (evaluation, modification, and upgrading). The intended audience is primarily the civil/structural or mechanical engineers conducting the design or evaluation of DOE facilities. The likelihood of occurrence of natural phenomena hazards atmore » each DOE site has been evaluated by the DOE Natural Phenomena Hazard Program. Probabilistic hazard models are available for earthquake, extreme wind/tornado, and flood. Alternatively, site organizations are encouraged to develop site-specific hazard models utilizing the most recent information and techniques available. In this document, performance goals and natural hazard levels are expressed in probabilistic terms, and design and evaluation procedures are presented in deterministic terms. Design/evaluation procedures conform closely to common standard practices so that the procedures will be easily understood by most engineers. Performance goals are expressed in terms of structure or equipment damage to the extent that: (1) the facility cannot function; (2) the facility would need to be replaced; or (3) personnel are endangered. 82 refs., 12 figs., 18 tabs.« less
Preschool Comes to School: Design Concerns of Preschool Facilities.

ERIC Educational Resources Information Center

Passantino, Richard J.

1994-01-01

Addresses design and safety issues of which school business administrators should be aware when they become involved in integrating a preschool facility with an elementary school. Discusses building environmental factors, safety, health codes, play surfaces, energy conservation, and architectural considerations. (KDP)
40 CFR 60.290 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Glass Manufacturing Plants § 60.290 Applicability and designation of affected facility. (a...

40 CFR 60.80 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Sulfuric Acid Plants § 60.80 Applicability and designation of affected facility. (a) The...
40 CFR 60.80 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Sulfuric Acid Plants § 60.80 Applicability and designation of affected facility. (a) The...
Kistler reusable vehicle facility design and operational approach

NASA Astrophysics Data System (ADS)

Fagan, D.; McInerney, F.; Johnston, C.; Tolson, B.

Kistler Aerospace Corporation is designing and developing the K-1, the world's first fully reusable aerospace vehicle to deliver satellites into orbit. The K-1 vehicle test program will be conducted in Woomera, Australia, with commercial operations scheduled to begin shortly afterwards. Both stages of the K-1 will return to the launch site utilizing parachutes and airbags for a soft landing within 24 h after launch. The turnaround flow of the two stages will cycle from landing site to a maintenance/refurbishment facility and through the next launch in only 9 days. Payload processing will occur in a separate facility in parallel with recovery and refurbishment operations. The vehicle design and on-board checkout capability of the avionics system eliminates the need for an abundance of ground checkout equipment. Payload integration, vehicle assembly, and K-1 transport to the launch pad will be performed horizontally, simplifying processing and reducing infrastructure requirements. This simple, innovative, and cost-effective approach will allow Kistler to offer its customers flexible, low-cost, and on-demand launch services.
Medical Tourist’s Perception in Selecting their Destination: A Global Perspective

PubMed Central

Sarwar, Abdullah AM; Manaf, Noorhazilah A; Omar, Azura

2012-01-01

Background: The need for better healthcare has grown significantly in recent years. In addition, the rising healthcare costs in the U.S. and in many European countries have forced many patients to seek medical treatment abroad, which has created the demand for medical tourism. With little yet known as to the perception of a medical tourist’s destination selection, this study aims to explore medical tourist’s perception in selecting their destination while going for medical treatment. Methods: Realizing the current need to examine closely the perception of medical tourists, this study had conducted a secondary study to collect data for assessing and identification of the key factors on patient’s perception and destination selection criteria. Results: The result confirms the existence of a very strong relationship between cost, service quality, treatment types and availability and marketing impact on the perception of the medical tourists’ in selecting their medical tourism destination. Conclusion: This study offers support for the proposed conceptual model and an empirical basis for comparison in future research. PMID:23113218
40 CFR 60.70 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Nitric Acid Plants § 60.70 Applicability and designation of affected facility. (a) The provisions...
40 CFR 60.70 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Nitric Acid Plants § 60.70 Applicability and designation of affected facility. (a) The provisions...
Solving a four-destination traveling salesman problem using Escherichia coli cells as biocomputers.

PubMed

Esau, Michael; Rozema, Mark; Zhang, Tuo Huang; Zeng, Dawson; Chiu, Stephanie; Kwan, Rachel; Moorhouse, Cadence; Murray, Cameron; Tseng, Nien-Tsu; Ridgway, Doug; Sauvageau, Dominic; Ellison, Michael

2014-12-19

The Traveling Salesman Problem involves finding the shortest possible route visiting all destinations on a map only once before returning to the point of origin. The present study demonstrates a strategy for solving Traveling Salesman Problems using modified E. coli cells as processors for massively parallel computing. Sequential, combinatorial DNA assembly was used to generate routes, in the form of plasmids made up of marker genes, each representing a path between destinations, and short connecting linkers, each representing a given destination. Upon growth of the population of modified E. coli, phenotypic selection was used to eliminate invalid routes, and statistical analysis was performed to successfully identify the optimal solution. The strategy was successfully employed to solve a four-destination test problem.
Magnet Design Considerations for Fusion Nuclear Science Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhai, Y.; Kessel, C.; El-Guebaly, L.

2016-06-01

The Fusion Nuclear Science Facility (FNSF) is a nuclear confinement facility that provides a fusion environment with components of the reactor integrated together to bridge the technical gaps of burning plasma and nuclear science between the International Thermonuclear Experimental Reactor (ITER) and the demonstration power plant (DEMO). Compared with ITER, the FNSF is smaller in size but generates much higher magnetic field, i.e., 30 times higher neutron fluence with three orders of magnitude longer plasma operation at higher operating temperatures for structures surrounding the plasma. Input parameters to the magnet design from system code analysis include magnetic field of 7.5more » T at the plasma center with a plasma major radius of 4.8 m and a minor radius of 1.2 m and a peak field of 15.5 T on the toroidal field (TF) coils for the FNSF. Both low-temperature superconductors (LTS) and high-temperature superconductors (HTS) are considered for the FNSF magnet design based on the state-of-the-art fusion magnet technology. The higher magnetic field can be achieved by using the high-performance ternary restacked-rod process Nb3Sn strands for TF magnets. The circular cable-in-conduit conductor (CICC) design similar to ITER magnets and a high-aspect-ratio rectangular CICC design are evaluated for FNSF magnets, but low-activation-jacket materials may need to be selected. The conductor design concept and TF coil winding pack composition and dimension based on the horizontal maintenance schemes are discussed. Neutron radiation limits for the LTS and HTS superconductors and electrical insulation materials are also reviewed based on the available materials previously tested. The material radiation limits for FNSF magnets are defined as part of the conceptual design studies for FNSF magnets.« less
Magnet design considerations for Fusion Nuclear Science Facility

DOE PAGES

Zhai, Yuhu; Kessel, Chuck; El-guebaly, Laila; ...

2016-02-25

The Fusion Nuclear Science Facility (FNSF) is a nuclear confinement facility to provide a fusion environment with components of the reactor integrated together to bridge the technical gaps of burning plasma and nuclear science between ITER and the demonstration power plant (DEMO). Compared to ITER, the FNSF is smaller in size but generates much higher magnetic field, 30 times higher neutron fluence with 3 orders of magnitude longer plasma operation at higher operating temperatures for structures surrounding the plasma. Input parameters to the magnet design from system code analysis include magnetic field of 7.5 T at the plasma center withmore » plasma major radius of 4.8 m and minor radius of 1.2 m, and a peak field of 15.5 T on the TF coils for FNSF. Both low temperature superconductor (LTS) and high temperature superconductor (HTS) are considered for the FNSF magnet design based on the state-of-the-art fusion magnet technology. The higher magnetic field can be achieved by using the high performance ternary Restack Rod Process (RRP) Nb3Sn strands for toroidal field (TF) magnets. The circular cable-in-conduit conductor (CICC) design similar to ITER magnets and a high aspect ratio rectangular CICC design are evaluated for FNSF magnets but low activation jacket materials may need to be selected. The conductor design concept and TF coil winding pack composition and dimension based on the horizontal maintenance schemes are discussed. Neutron radiation limits for the LTS and HTS superconductors and electrical insulation materials are also reviewed based on the available materials previously tested. As a result, the material radiation limits for FNSF magnets are defined as part of the conceptual design studies for FNSF magnets.« less
The Changing Relationship between Origins, Education and Destinations in the 1990s and 2000s

ERIC Educational Resources Information Center

Devine, Fiona; Li, Yaojun

2013-01-01

This paper examines the changing relationship between origins, education and destinations in mobility processes. The meritocracy thesis suggests the relationships between origins and education and between origins and destination will weaken while the relationship between education and destinations will strengthen. Comparing data from the 1991…
10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2012 CFR

2012-01-01

... specific site conditions identified through in situ monitoring, testing, or excavation. (c) Retrieval of waste. The underground facility shall be designed to permit retrieval of waste in accordance with the... RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...
10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2013 CFR

2013-01-01

... specific site conditions identified through in situ monitoring, testing, or excavation. (c) Retrieval of waste. The underground facility shall be designed to permit retrieval of waste in accordance with the... RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...
10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2011 CFR

2011-01-01

... specific site conditions identified through in situ monitoring, testing, or excavation. (c) Retrieval of waste. The underground facility shall be designed to permit retrieval of waste in accordance with the... RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...
10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2014 CFR

2014-01-01

... specific site conditions identified through in situ monitoring, testing, or excavation. (c) Retrieval of waste. The underground facility shall be designed to permit retrieval of waste in accordance with the... RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...
40 CFR 60.150 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Sewage Treatment Plants § 60.150 Applicability and designation of affected facility. (a) The... (dry basis) produced by municipal sewage treatment plants, or each incinerator that charges more than...
The Use of Environmental Test Facilities for Purposes Beyond Their Original Design

NASA Technical Reports Server (NTRS)

Fisher, Terry C.; Marner, W. J.

2000-01-01

Increasing demands from space flight project offices are requiring environmental testing facilities to become more versatile with increased capabilities. At the same time, maintaining a cost-effective approach to test operations has driven efforts to use these facilities for purposes beyond their original design. This paper presents an overview of the Jet Propulsion Laboratory's efforts to provide JPL's space flight projects with test facilities to meet unique test requirements and to serve the needs of selected outside customers. The large number of recent Mars Missions, including the Mars Pathfinder project, have required testing of components and systems in a Martian surface environment in facilities originally designed for deep space testing. The unique problems associated with performing these tests are discussed, along with practical solutions. Other unique test requirements are discussed including the use of space simulation chambers for testing high altitude balloon gondolas and the use of vacuum chambers for system level test firing of an ion propulsion engine.
TRICARE: the Civilian Health and Medical Program of the Uniformed Services (CHAMPUS); specialized treatment services (STS) program--DoD. Notice.

PubMed

1998-11-16

This notice is to advise interested parties that Brooke Army Medical Center (BAMC) and Wilford Hall Medical Center (WHMC), hereinafter referred to as Destination San Antonio, have been designated the Regional Specialized Treatment Service facilities (STSFs) for DRGs 1, 3, 4, 49, 104-107, 110-111, 191, 209, 491, 286, and 357. The application for the STSF designation was submitted by the Lead Agency for TRICARE Region 6 and approved by the Assistant Secretary of Defense (Health Affairs). The Lead Agent will oversee that the STSFs maintain the quality and standards required for specialized treatment services. DoD beneficiaries residing within a 200-mile radius of Destination San Antonio facilities falling into the above patient category must be evaluated by Destination San Antonio staff before receiving care for these DRGs under direct military care or TRICARE/CHAMPUS cost sharing. Travel and lodging for the patient and, if stated to be medically necessary by a referring physician, for a nonmedical attendant, will be reimbursed by Destination San Antonio facility in accordance with the provisions of the Joint Federal Travel Regulation. Although evaluation in person is preferred, it is possible to conduct the evaluation telephonically if the patient is unable to travel to a Destination San Antonio facility. If the care for these DRGs cannot be performed at the Destination San Antonio facilities, the TRICARE Managed Care Support Contractor for Region 6 will provide a medical necessity review prior to issuance of an Inpatient Care Authorization or Non-availability Statement.
Student Control as a Planning and Design Factor in Educational Facilities.

ERIC Educational Resources Information Center

Lilley, H. Edward

Appropriate school facility design promotes a balance between student freedom and control. This report evaluates research on architectural approaches affecting student control and offers design recommendations. Since 1960, school discipline and vandalism problems have exploded. Senator Birch Bayh's committee reported that certain crimes are…
10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Additional design criteria for the underground facility. 60.133 Section 60.133 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...
Destination memory in schizophrenia: "Did I told Elvis Presley about the thief?"

PubMed

El Haj, Mohamad; Altman, Rosalie; Bortolon, Catherine; Capdevielle, Delphine; Raffard, Stéphane

2017-02-01

Destination memory refers to the ability to remember to whom a piece of information was previously transmitted. Our paper assessed this ability in schizophrenia. Twenty-five patients with schizophrenia and 25 control participants told proverbs (e.g., "send a thief to catch a thief") to pictures of celebrities (e.g., Elvis Presley). Afterward, participants had to indicate to which celebrity they had previously said the proverbs. Participants also completed a binding task in which they were required to associate letters with their corresponding context (i.e., location). Analysis revealed worse destination memory and binding in patients with schizophrenia than in controls. In both populations, destination memory was significantly correlated with performances on the binding task. Our findings suggest difficulty in the ability to attribute information to its appropriate destination in schizophrenia. This difficulty may be related to compromise in binding separate cues together to form a coherent representation of an event in memory. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Design knowledge capture for a corporate memory facility

NASA Technical Reports Server (NTRS)

Boose, John H.; Shema, David B.; Bradshaw, Jeffrey M.

1990-01-01

Currently, much of the information regarding decision alternatives and trade-offs made in the course of a major program development effort is not represented or retained in a way that permits computer-based reasoning over the life cycle of the program. The loss of this information results in problems in tracing design alternatives to requirements, in assessing the impact of change in requirements, and in configuration management. To address these problems, the problem was studied of building an intelligent, active corporate memory facility which would provide for the capture of the requirements and standards of a program, analyze the design alternatives and trade-offs made over the program's lifetime, and examine relationships between requirements and design trade-offs. Early phases of the work have concentrated on design knowledge capture for the Space Station Freedom. Tools are demonstrated and extended which helps automate and document engineering trade studies, and another tool is being developed to help designers interactively explore design alternatives and constraints.
The allure of new immigrant destinations and the Great Recession in the United States.

PubMed

Ellis, Mark; Wright, Richard; Townley, Matthew

2014-01-01

In the 1990s, the immigrant population in the United States dispersed to non-traditional settlement locations (what have become known as "new immigrant destinations"). This paper examines whether the allure of new destinations persisted in the 2000s with a particular focus on the internal migration of the foreign born during the recent deep recessionary period and its aftermath. Three specific questions motivate the analysis. First, are immigrants, much like the US-born population, becoming less migratory within the country over time? Second, is immigrant dispersal from traditional gateways via internal migration continuing despite considerable economic contraction in many new destination metropolitan areas? Third, is immigration from aboard a substitute for what appears to be declining immigrant internal migration to new destinations? The findings reveal a close correlation between the declining internal migration propensity of the US-born and immigrants in the last two decades. We also observe parallels between the geographies of migration of native- and foreign-born populations with both groups moving to similar metropolitan areas in the 1990s. This redistributive association, however, weakened in the subsequent decade as new destination metropolitan areas lost their appeal for both groups, especially immigrants. There is no evidence to suggest that immigration from abroad is substituting for the decline in immigrant redistribution through internal migration to new destinations. Across destination types the relationship between immigration from abroad and the internal migration of the foreign born remained the same before, during, and after the Great Recession.
40 CFR 264.31 - Design and operation of facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Design and operation of facility. 264.31 Section 264.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES...-sudden release of hazardous waste or hazardous waste constituents to air, soil, or surface water which...
Educational Trends Shaping School Planning, Design, Construction, Funding and Operation

ERIC Educational Resources Information Center

Stevenson, Kenneth R.

2010-01-01

What does the future hold for educators and facilities professionals when it comes to planning, building, funding, and operating school facilities? No one can absolutely know beforehand. However, there are many, many indicators of where public education in the United States may well be destined. These indicators take the form of already occurring…
“Forget to Whom You Have Told This Proverb”: Directed Forgetting of Destination Memory in Alzheimer's Disease

PubMed Central

El Haj, Mohamad; Gandolphe, Marie-Charlotte; Allain, Philippe; Fasotti, Luciano; Antoine, Pascal

2015-01-01

Destination memory is the ability to remember the receiver of transmitted information. By means of a destination memory directed forgetting task, we investigated whether participants with Alzheimer's Disease (AD) were able to suppress irrelevant information in destination memory. Twenty-six AD participants and 30 healthy elderly subjects were asked to tell 10 different proverbs to 10 different celebrities (List 1). Afterwards, half of the participants were instructed to forget the destinations (i.e., the celebrities) whereas the other half were asked to keep them in mind. After telling 10 other proverbs to 10 other celebrities (List 2), participants were asked to read numbers aloud. Subsequently, all the participants were asked to remember the destinations of List 1 and List 2, regardless of the forget or remember instructions. The results show similar destination memory in AD participants who were asked to forget the destinations of List 1 and those who were asked to retain them. These findings are attributed to inhibitory deficits, by which AD participants have difficulties to suppress irrelevant information in destination memory. PMID:25918456
STORAGE/SEDIMENTATION FACILITIES FOR CONTROL OF STORM AND COMBINED SEWER OVERFLOW: DESIGN MANUAL

EPA Science Inventory

This manual describes applications of storage facilities in wet-weather flow management and presents step-by-step procedures for analysis and design of storage-treatment facilities. Retention, detention, and sedimentation storage information is classified and described. Internati...
Origin and destination studies literature search results

DOT National Transportation Integrated Search

1999-10-01

This report summarizes the findings of a literature search conducted in support of a Washington State Department of Transportation effort to plan an origin and destination study in the Interstate 5 corridor. The objective was to support the study pro...
Value Engineering. "A Working Tool for Cost Control in the Design of Educational Facilities."

ERIC Educational Resources Information Center

Lawrence, Jerry

Value Engineering (VE) is a cost optimizing technique used to analyze design quality and cost-effectiveness. The application of VE procedures to the design and construction of school facilities has been adopted by the state of Washington. By using VE, the optimum value for every life cycle dollar spent on a facility is obtained by identifying not…
Parallel machine architecture and compiler design facilities

NASA Technical Reports Server (NTRS)

Kuck, David J.; Yew, Pen-Chung; Padua, David; Sameh, Ahmed; Veidenbaum, Alex

1990-01-01

The objective is to provide an integrated simulation environment for studying and evaluating various issues in designing parallel systems, including machine architectures, parallelizing compiler techniques, and parallel algorithms. The status of Delta project (which objective is to provide a facility to allow rapid prototyping of parallelized compilers that can target toward different machine architectures) is summarized. Included are the surveys of the program manipulation tools developed, the environmental software supporting Delta, and the compiler research projects in which Delta has played a role.
Destination memory and familiarity: better memory for conversations with Elvis Presley than with unknown people.

PubMed

El Haj, Mohamad; Omigie, Diana; Samson, Séverine

2015-06-01

Familiarity is assumed to exert a beneficial effect on memory in older adults. Our paper investigated this issue specifically for destination memory, that is, memory of the destination of previously relayed information. Young and older adults were told familiar (Experiment 1) and unfamiliar (Experiment 2) proverbs associated with pictures depicting faces of celebrities (e.g., Elvis Presley) or unknown people, with a specific proverb assigned to each face. In a later recognition task, participants were presented with the previously exposed proverb-face pairs and for each pair had to decide whether they had previously relayed the given proverb to the given face. In general, destination performance was found to be higher for familiar than for unfamiliar faces. However while there was no difference between the two groups when the proverbs being relayed were unfamiliar, the advantage of face familiarity on destination memory was present only for older adults when the proverbs being relayed were familiar. Our results show that destination memory in older adults is sensitive to familiarity of both destination and output information.
Space Station Furnace Facility. Volume 2: Requirements definition and conceptual design study

NASA Technical Reports Server (NTRS)

1992-01-01

The Space Station Freedom Furnace (SSFF) Project is divided into two phases: phase 1, a definition study phase, and phase 2, a design and development phase. TBE was awarded a research study entitled, 'Space Station Furnace Facility Requirements Definition and Conceptual Design Study' on June 2, 1989. This report addresses the definition study phase only. Phase 2 is to be complete after completion of phase 1. The contract encompassed a requirements definition study and culminated in hardware/facility conceptual designs and hardware demonstration development models to test these conceptual designs. The study was divided into two parts. Part 1 (the basic part of the effort) encompassed preliminary requirements definition and assessment; conceptional design of the SSFF Core; fabrication of mockups; and preparation for the support of a conceptional design review (CoDR). Part 2 (the optional part of the effort) included detailed definition of the engineering and design requirements, as derived from the science requirements; refinement of the conceptual design of the SSFF Core; fabrication and testing of the 'breadboards' or development models; and preparation for and support of a requirements definition review.
Destination memory and deception: when I lie to Barack Obama about the moon.

PubMed

Haj, Mohamad El; Saloppé, Xavier; Nandrino, Jean Louis

2018-05-01

This study investigates whether deceivers demonstrate high memory of the person to whom lies have been told (i.e., high destination memory). Participants were asked to tell true information (e.g., the heart is a vital organ) and false information (e.g., the moon is bigger than the sun) to pictures of famous people (e.g., Barack Obama) and, in a subsequent recognition test, they had to remember to whom each type of information had previously been told. Participants were also assessed on a deception scale to divide them into two populations (i.e., those with high vs. those with low deception). Participants with high tendency to deceive demonstrated similar destination memory for both false and true information, whereas those with low deception demonstrated higher destination memory for lies than for true information. Individuals with a high tendency to deceive seem to keep track of the destination of both true information and lies to be consistent in their future social interactions, and thus to avoid discovery of their deception. However, the inconsistency between deceiving and the moral standard of individuals with a low tendency to deceive may result in high destination memory in these individuals.
Foreign-Born Out-Migration from New Destinations: Onward or Back to the Enclave?1

PubMed Central

Kritz, Mary M.; Gurak, Douglas T.; Lee, Min-Ah

2012-01-01

Immigrants have a markedly higher likelihood of migrating internally if they live in new destinations. This paper looks at why that pattern occurs and at how immigrants’ out-migration to new versus traditional destinations responds to their labor market economic and industrial structure, nativity origins and concentration, geographic region, and 1995 labor market type. Confidential data from the 2000 and 1990 decennial censuses are used for the analysis. Metropolitan and non-metropolitan areas are categorized into 741 local labor markets and classified as new or traditional based on their nativity concentrations of immigrants from the largest Asian, Caribbean and Latin American origins. The analysis showed that immigrants were less likely to migrate to new destinations if they lived in areas of higher nativity concentration, foreign-born population growth, and wages but more likely to make that move if they were professionals, agricultural or blue collar workers, highly educated, fluent in English, and lived in other new destinations. While most immigrants are more likely to migrate to new rather than traditional destinations that outcome differs sharply for immigrants from different origins and for some immigrants, particularly those from the Caribbean, the dispersal process to new destinations has barely started. PMID:23347493
Second Destination Transportation, Phase II

DTIC Science & Technology

1976-01-01

improvement. [j As an initial step toward improving shipment planning in the DoD, we fm recommend that the ASD{I< ScL ) sponsor a shipment planning...of containers in surface transportation. The principal ASD(I> ScL ) involvement in the second destination transportation programs of the Services... ScL ) responsibility for DoD transportation is shared with other DoD components. The ASD(C) is responsible for reviewing the SDT budgets of the
Design considerations and test facilities for accelerated radiation effects testing

NASA Technical Reports Server (NTRS)

Price, W. E.; Miller, C. G.; Parker, R. H.

1972-01-01

Test design parameters for accelerated dose rate radiation effects tests for spacecraft parts and subsystems used in long term mission (years) are detailed. A facility for use in long term accelerated and unaccelerated testing is described.
Gas-Grain Simulation Facility (GGSF). Volume 2: Conceptual design definition

NASA Technical Reports Server (NTRS)

Zamel, James M.

1993-01-01

This document is Volume 2 of the Final Report for the Phase A Study of the Gas-Grain Simulation Facility (GGSF), and presents the GGSF Conceptual Design. It is a follow-on to the Volume 1 Facility Definition Study, NASA report CR 177606. The development of a conceptual design for a Space Station Freedom (SSF) facility that will be used for investigating particle interactions in varying environments, including various gas mixtures, pressures, and temperatures is delineated. It's not possible to study these experiments on earth due to the long reaction times associated with this type of phenomena, hence the need for extended periods of microgravity. The particle types will vary in composition (solids and liquids), sizes (from submicrons to centimeters), and concentrations (from single particles to 10(exp 10) per cubic centimeter). The results of the experiments pursued in the GGSF will benefit a variety of scientific inquiries. These investigations span such diverse topics as the formation of planets and planetary rings, cloud and haze processes in planetary atmospheres, the composition and structure of astrophysical objects, and the viability of airborne microbes (e.g., in a manned spacecraft).
A reliable facility location design model with site-dependent disruption in the imperfect information context

PubMed Central

Yun, Lifen; Wang, Xifu; Fan, Hongqiang; Li, Xiaopeng

2017-01-01

This paper proposes a reliable facility location design model under imperfect information with site-dependent disruptions; i.e., each facility is subject to a unique disruption probability that varies across the space. In the imperfect information contexts, customers adopt a realistic “trial-and-error” strategy to visit facilities; i.e., they visit a number of pre-assigned facilities sequentially until they arrive at the first operational facility or give up looking for the service. This proposed model aims to balance initial facility investment and expected long-term operational cost by finding the optimal facility locations. A nonlinear integer programming model is proposed to describe this problem. We apply a linearization technique to reduce the difficulty of solving the proposed model. A number of problem instances are studied to illustrate the performance of the proposed model. The results indicate that our proposed model can reveal a number of interesting insights into the facility location design with site-dependent disruptions, including the benefit of backup facilities and system robustness against variation of the loss-of-service penalty. PMID:28486564
Washington State freight truck origin and destination study : methods, procedures, and data dictionary

DOT National Transportation Integrated Search

1994-12-01

The Washington State Department of Transportation (WSDOT)initiated a state-wide freight truck origin and destination study in April of 1993. A region-wide freight truck origin and destination study was first proposed in Washington as an element of th...
Design-Build Process for the Research Support Facility (RSF) (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-06-01

An in-depth look at how the U.S. DOE and NREL used a performance-based design-build contract to build the Research Support Facility (RSF); one of the most energy efficient office buildings in the world.
Optimal capacity design of LID facility for conserving natural water cycle and its sensitivity analysis

NASA Astrophysics Data System (ADS)

Lee, O.; Choi, J.; Lee, J.; Kim, S.

2017-12-01

Since the 20th century, urbanization has resulted in increased impermeable land surface and reduced infiltration capacity in catchment scale. Especially, when agriculture area or forest area would be developed into urban area, it can cause more runoff in the same climate condition. Such urbanization causes problems such as changes in hydrological cycle and ecosystem disturbance. Various methods have been proposed worldwide to reduce the impact of such urbanization. Among the various strategies, the low-impact development is a development strategy that aims to return to pre-development state by minimizing the change of the hydrological cycle due to urbanization. In this strategy, the infiltration and/or surface storage of stormwater runoff can be increased through the installation of various facilities. In this study, a facility capacity design strategy is proposed to return into the natural water cycle through the installation of various LID facilities. This is accomplished by determining the optimal LID facility design capacity through which flow duration curves remain the same before and after urban development. For this purpose, EPA-SWMM is constructed with a part of Busan Metropolitan City Noksan Industrial Complex as a virtual processing area. Under the various land-use scenarios, the optimum design capacity of various LID facilities capable of retaining the flow duration curve before and after development is determined. In addition, the sensitivity of the optimal design capacity of LID facilities is analyzed according to the design specifications of various LID facilities, the local rainfall characteristics, and the size of the treatment area. Acknowledgement This research was supported by a grant (2016000200002) from Public Welfare Technology Development Program funded by Ministry of Environment of Korean government.

Design summary of a geostationary facility utilized as a communications platform

NASA Technical Reports Server (NTRS)

Barberis, N. J.; Brown, J. V.

1986-01-01

This paper describes the technical aspects of a geostationary platform facility that makes maximum use of the planned NASA space station and its elements, mainly the orbital maneuvering vehicle (OMV) and the orbital transfer vehicles (OTV). The platform design concept is described, with emphasis on the key technologies utilized to configure the platform. Key systems aspects include a design summary with discussion of the controls, telemetry, command and ranging, power, propulsion, control electronics, thermal control subsystems, and space station interfaces. The use of the facility as a communications platform is developed to demonstrate the attractiveness of the concept. The economic benefits are discussed, as well as the concept of servicing for payload upgrade.
The design of the optical Thomson scattering diagnostic for the National Ignition Facility [The preliminary design of the optical Thomson scattering diagnostic for the National Ignition Facility

DOE PAGES

Datte, P. S.; Ross, J. S.; Froula, D. H.; ...

2016-09-21

Here, the National Ignition Facility (NIF) is a 192 laser beam facility designed to support the Stockpile Stewardship, High Energy Density and Inertial Confinement Fusion (ICF) programs. We report on the design of an Optical Thomson Scattering (OTS) diagnostic that has the potential to transform the community’s understanding of NIF hohlraum physics by providing first principle, local, time-resolved measurements of under-dense plasma conditions. The system design allows operation with different probe laser wavelengths by manual selection of the appropriate beam splitter and gratings before the shot. A deep-UV probe beam (λ 0-210 nm) will be used to optimize the scatteredmore » signal for plasma densities of 5 × 10 20 electrons/cm 3 while a 3ω probe will be used for experiments investigating lower density plasmas of 1 × 10 19 electrons/cm 3. We report the phase I design of a two phase design strategy. Phase I includes the OTS telescope, spectrometer, and streak camera; these will be used to assess the background levels at NIF. Phase II will include the design and installation of a probe laser.« less
The design of the optical Thomson scattering diagnostic for the National Ignition Facility [The preliminary design of the optical Thomson scattering diagnostic for the National Ignition Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Datte, P. S.; Ross, J. S.; Froula, D. H.

Here, the National Ignition Facility (NIF) is a 192 laser beam facility designed to support the Stockpile Stewardship, High Energy Density and Inertial Confinement Fusion (ICF) programs. We report on the design of an Optical Thomson Scattering (OTS) diagnostic that has the potential to transform the community’s understanding of NIF hohlraum physics by providing first principle, local, time-resolved measurements of under-dense plasma conditions. The system design allows operation with different probe laser wavelengths by manual selection of the appropriate beam splitter and gratings before the shot. A deep-UV probe beam (λ 0-210 nm) will be used to optimize the scatteredmore » signal for plasma densities of 5 × 10 20 electrons/cm 3 while a 3ω probe will be used for experiments investigating lower density plasmas of 1 × 10 19 electrons/cm 3. We report the phase I design of a two phase design strategy. Phase I includes the OTS telescope, spectrometer, and streak camera; these will be used to assess the background levels at NIF. Phase II will include the design and installation of a probe laser.« less
Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant Conceptual Design Engineering Report (CDER)

NASA Technical Reports Server (NTRS)

1981-01-01

The reference conceptual design of the magnetohydrodynamic (MHD) Engineering Test Facility (ETF), a prototype 200 MWe coal-fired electric generating plant designed to demonstrate the commercial feasibility of open cycle MHD, is summarized. Main elements of the design, systems, and plant facilities are illustrated. System design descriptions are included for closed cycle cooling water, industrial gas systems, fuel oil, boiler flue gas, coal management, seed management, slag management, plant industrial waste, fire service water, oxidant supply, MHD power ventilating
Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant Conceptual Design Engineering Report (CDER)

NASA Astrophysics Data System (ADS)

1981-09-01

The reference conceptual design of the magnetohydrodynamic (MHD) Engineering Test Facility (ETF), a prototype 200 MWe coal-fired electric generating plant designed to demonstrate the commercial feasibility of open cycle MHD, is summarized. Main elements of the design, systems, and plant facilities are illustrated. System design descriptions are included for closed cycle cooling water, industrial gas systems, fuel oil, boiler flue gas, coal management, seed management, slag management, plant industrial waste, fire service water, oxidant supply, MHD power ventilating
Design data package and operating procedures for MSFC solar simulator test facility

NASA Technical Reports Server (NTRS)

1981-01-01

Design and operational data for the solar simulator test facility are reviewed. The primary goal of the facility is to evaluate the performance capacibility and worst case failure modes of collectors, which utilize either air or liquid transport media. The facility simulates environmental parameters such as solar radiation intensity, solar spectrum, collimation, uniformity, and solar attitude. The facility also simulates wind conditions of velocity and direction, solar system conditions imposed on the collector, collector fluid inlet temperature, and geometric factors of collector tilt and azimuth angles. Testing the simulator provides collector efficiency data, collector time constant, incident angle modifier data, and stagnation temperature values.
Design study of advanced model support systems for the National Transonic Facility (NTF)

NASA Technical Reports Server (NTRS)

1987-01-01

It has long been recognized that the sting (or support system) is a very critical part of the model system. The designer is frequently faced with the tradeoff of minimizing sting size, thereby compromising facility and model safety, against a larger sting and the subsequent problems of sting interference effects. In the NASA Langley Research Center National Transonic Facility (NTF), this problem is accentuated by the severe environment of high pressure/low temperature, designed into the facility to provide the desired high Reynolds number. Compromises in the configuration geometry and/or limiting the test envelope are therefore contrary to the purposes and goals of the NTF and are unacceptable. The results of an investigation aimed at improvements of 25% in both strength and Young's modulus of elasticity as compared to high strength cryogenically acceptable steels currently being used are presented. Various materials or combinations of materials were studied along with different design approaches. Design concepts were developed which included conventional material stings, advanced composites, and hybrid configurations. Candidate configurations are recommended.
Establishment of a National Accelerator Facility: Design and construction phase

NASA Astrophysics Data System (ADS)

1981-06-01

The main components of an accelerator facility for nuclear physics, isotope production, and radiotherapy in South Africa are in 8-MeV solid pole injector cyclotron and a separated sector cyclotron with a k-value of 200 MeV. Progress made in the development of the light ion injector and in the design of the control and beam transport systems is described. Mechanical and engineering tasks associated with component manufacture are discussed as well as the construction of the building to house the facility and the installation of necessary services.
Design of a video teleconference facility for a synchronous satellite communications link

NASA Technical Reports Server (NTRS)

Richardson, M. D.

1979-01-01

The system requirements, design tradeoffs, and final design of a video teleconference facility are discussed, including proper lighting, graphics transmission, and picture aesthetics. Methods currently accepted in the television broadcast industry are used in the design. The unique problems associated with using an audio channel with a synchronous satellite communications link are discussed, and a final audio system design is presented.
40 CFR 60.180 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Lead Smelters § 60.180 Applicability and designation of affected facility. (a) The...: sintering machine, sintering machine discharge end, blast furnace, dross reverberatory furnace, electric...
40 CFR 60.180 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Lead Smelters § 60.180 Applicability and designation of affected facility. (a) The...: sintering machine, sintering machine discharge end, blast furnace, dross reverberatory furnace, electric...
40 CFR 60.540 - Applicability and designation of affected facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for the Rubber Tire Manufacturing Industry § 60.540 Applicability and designation of affected... each of the following affected facilities in rubber tire manufacturing plants that commence... cementing operation in rubber tire manufacturing plants that commenced construction, modification, or...
A "Musical Pathway" for Spatially Disoriented Blind Residents of a Skilled Nursing Facility.

ERIC Educational Resources Information Center

Uslan, M. M.; And Others

1988-01-01

The "Auditory Directional System" designed to help blind persons get to interior destinations in an institutional setting, uses a compact disc player, a network of speakers, infrared "people" detection equipment, and a computer controlled speaker-sequencing system. After initial destination selection, musical cues are activated as the person…
Facility design consideration for continuous mix production of class 1.3 propellant

NASA Technical Reports Server (NTRS)

Williamson, K. L.; Schirk, P. G.

1994-01-01

In November of 1989, NASA awarded the Advanced Solid Rocket Motor (ASRM) contract to Lockheed Missiles and Space Company (LMSC) for production of advanced solid rocket motors using the continuous mix process. Aerojet ASRM division (AAD) was selected as the facility operator and RUST International Corporation provided the engineering, procurement, and construction management services. The continuous mix process mandates that the mix and cast facilities be 'close-coupled' along with the premix facilities, creating unique and challenging requirements for the facility designer. The classical approach to handling energetic materials-division into manageable quantities, segregation, and isolation-was not available due to these process requirements and quantities involved. This paper provides a description of the physical facilities, the continuous mix process, and discusses the monitoring and detection techniques used to mitigate hazards and prevent an incident.
Design of a Facility to Test the Advanced Stirling Radioisotope Generator Engineering Unit

NASA Technical Reports Server (NTRS)

Lewandowski, Edward J.; Schreiber, Jeffrey G.; Oriti, Salvatore M.; Meer, David W.; Brace, Michael H.; Dugala, Gina

2009-01-01

The Advanced Stirling Radioisotope Generator (ASRG) is being considered to power deep space missions. An engineering unit, the ASRG-EU, was designed and fabricated by Lockheed Martin under contract to the Department of Energy. This unit is currently on an extended operation test at NASA Glenn Research Center to generate performance data and validate the life and reliability predictions for the generator and the Stirling convertors. A special test facility was designed and built for testing the ASRG-EU. Details of the test facility design are discussed. The facility can operate the convertors under AC bus control or with the ASRG-EU controller. It can regulate input thermal power in either a fixed temperature or fixed power mode. An enclosure circulates cooled air around the ASRG-EU to remove heat rejected from the ASRG-EU by convection. A custom monitoring and data acquisition system supports the test. Various safety features, which allow 2417 unattended operation, are discussed.
Factors Affecting the Attractiveness of Medical Tourism Destination: An Empirical Study on India- Review Article

PubMed Central

SULTANA, Seyama; HAQUE, Ahasanul; MOMEN, Abdul; YASMIN, Farzana

2014-01-01

Abstract Background In this edge, medical tourism is not a new idea. Medical treatment is one of the essential demands of human beings and it requires high quality and intensive care. Beside western world, few developing countries are playing key roles as medical tourism destinations. India is one of the leading names among these countries. The purpose of the paper is to find the factors influencing the attractiveness of India as a health tourism destination. Methods The study has found the major contributing factors and their relative importance in the attractiveness of the health tourism destination that is India from consumers’ perspectives by conducting survey with an application of structural equation modelling approach. Results In Indian context, medical tourists consider service quality and cost mostly to select any medical destination. In addition they also give value to the destination competitiveness but tourist attitude is less important in comparison with other factors affecting their destination choice. Since the study has used structural equation modelling approach to test the hypothesis and figure out the relative importance of the factors, the fundamental indices such as Normed Chi square(less than 3), RMSEA (less than 0.08) and CFI (more than 0.90) values show the overall model fit of the proposed model. Conclusion In order to transform a country such as India as an attractive and competitive medical tourist destination in this time of globalization, a step should be taken to control cost ensuring the quality of services. PMID:25909055
Factors affecting the attractiveness of medical tourism destination: an empirical study on India- review article.

PubMed

Sultana, Seyama; Haque, Ahasanul; Momen, Abdul; Yasmin, Farzana

2014-07-01

In this edge, medical tourism is not a new idea. Medical treatment is one of the essential demands of human beings and it requires high quality and intensive care. Beside western world, few developing countries are playing key roles as medical tourism destinations. India is one of the leading names among these countries. The purpose of the paper is to find the factors influencing the attractiveness of India as a health tourism destination. The study has found the major contributing factors and their relative importance in the attractiveness of the health tourism destination that is India from consumers' perspectives by conducting survey with an application of structural equation modelling approach. In Indian context, medical tourists consider service quality and cost mostly to select any medical destination. In addition they also give value to the destination competitiveness but tourist attitude is less important in comparison with other factors affecting their destination choice. Since the study has used structural equation modelling approach to test the hypothesis and figure out the relative importance of the factors, the fundamental indices such as Normed Chi square(less than 3), RMSEA (less than 0.08) and CFI (more than 0.90) values show the overall model fit of the proposed model. In order to transform a country such as India as an attractive and competitive medical tourist destination in this time of globalization, a step should be taken to control cost ensuring the quality of services.
1991 Southern California origin-destination survey : summary findings

DOT National Transportation Integrated Search

1993-02-01

This report presents the findings from the 1991 Southern California Origin-Destination Survey. The survey was coordinated and managed by the Southern California Association of Governments (SCAG) for the following five agencies representing their resp...
Destination: Geology?

NASA Astrophysics Data System (ADS)

Price, Louise

2016-04-01

"While we teach, we learn" (Roman philosopher Seneca) One of the most beneficial ways to remember a theory or concept is to explain it to someone else. The offer of fieldwork and visits to exciting destinations is arguably the easiest way to spark a students' interest in any subject. Geology at A-Level (age 16-18) in the United Kingdom incorporates significant elements of field studies into the curriculum with many students choosing the subject on this basis and it being a key factor in consolidating student knowledge and understanding. Geology maintains a healthy annual enrollment with interest in the subject increasing in recent years. However, it is important for educators not to loose sight of the importance of recruitment and retention of students. Recent flexibility in the subject content of the UK curriculum in secondary schools has provided an opportunity to teach the basic principles of the subject to our younger students and fieldwork provides a valuable opportunity to engage with these students in the promotion of the subject. Promotion of the subject is typically devolved to senior students at Hessle High School and Sixth Form College, drawing on their personal experiences to engage younger students. Prospective students are excited to learn from a guest speaker, so why not use our most senior students to engage and promote the subject rather than their normal subject teacher? A-Level geology students embarking on fieldwork abroad, understand their additional responsibility to promote the subject and share their understanding of the field visit. They will typically produce a series of lessons and activities for younger students using their newly acquired knowledge. Senior students also present to whole year groups in seminars, sharing knowledge of the location's geology and raising awareness of the exciting destinations offered by geology. Geology fieldwork is always planned, organised and led by the member of staff to keep costs low, with recent visits
A flight test facility design for examining digital information transfer

NASA Technical Reports Server (NTRS)

Knox, Charles E.

1990-01-01

Information is given in viewgraph form on a flight test facility design for examining digital information transfer. Information is given on aircraft/ground exchange, data link research activities, data link display format, a data link flight test, and the flight test setup.

Preventing Airborne Disease Transmission: Review of Methods for Ventilation Design in Health Care Facilities

PubMed Central

Aliabadi, Amir A.; Rogak, Steven N.; Bartlett, Karen H.; Green, Sheldon I.

2011-01-01

Health care facility ventilation design greatly affects disease transmission by aerosols. The desire to control infection in hospitals and at the same time to reduce their carbon footprint motivates the use of unconventional solutions for building design and associated control measures. This paper considers indoor sources and types of infectious aerosols, and pathogen viability and infectivity behaviors in response to environmental conditions. Aerosol dispersion, heat and mass transfer, deposition in the respiratory tract, and infection mechanisms are discussed, with an emphasis on experimental and modeling approaches. Key building design parameters are described that include types of ventilation systems (mixing, displacement, natural and hybrid), air exchange rate, temperature and relative humidity, air flow distribution structure, occupancy, engineered disinfection of air (filtration and UV radiation), and architectural programming (source and activity management) for health care facilities. The paper describes major findings and suggests future research needs in methods for ventilation design of health care facilities to prevent airborne infection risk. PMID:22162813
Preventing airborne disease transmission: review of methods for ventilation design in health care facilities.

PubMed

Aliabadi, Amir A; Rogak, Steven N; Bartlett, Karen H; Green, Sheldon I

2011-01-01

Health care facility ventilation design greatly affects disease transmission by aerosols. The desire to control infection in hospitals and at the same time to reduce their carbon footprint motivates the use of unconventional solutions for building design and associated control measures. This paper considers indoor sources and types of infectious aerosols, and pathogen viability and infectivity behaviors in response to environmental conditions. Aerosol dispersion, heat and mass transfer, deposition in the respiratory tract, and infection mechanisms are discussed, with an emphasis on experimental and modeling approaches. Key building design parameters are described that include types of ventilation systems (mixing, displacement, natural and hybrid), air exchange rate, temperature and relative humidity, air flow distribution structure, occupancy, engineered disinfection of air (filtration and UV radiation), and architectural programming (source and activity management) for health care facilities. The paper describes major findings and suggests future research needs in methods for ventilation design of health care facilities to prevent airborne infection risk.
Ford Motor Company NDE facility shielding design.

PubMed

Metzger, Robert L; Van Riper, Kenneth A; Jones, Martin H

2005-01-01

Ford Motor Company proposed the construction of a large non-destructive evaluation laboratory for radiography of automotive power train components. The authors were commissioned to design the shielding and to survey the completed facility for compliance with radiation doses for occupationally and non-occupationally exposed personnel. The two X-ray sources are Varian Linatron 3000 accelerators operating at 9-11 MV. One performs computed tomography of automotive transmissions, while the other does real-time radiography of operating engines and transmissions. The shield thickness for the primary barrier and all secondary barriers were determined by point-kernel techniques. Point-kernel techniques did not work well for skyshine calculations and locations where multiple sources (e.g. tube head leakage and various scatter fields) impacted doses. Shielding for these areas was determined using transport calculations. A number of MCNP [Briesmeister, J. F. MCNPCA general Monte Carlo N-particle transport code version 4B. Los Alamos National Laboratory Manual (1997)] calculations focused on skyshine estimates and the office areas. Measurements on the operational facility confirmed the shielding calculations.
Moderator Demonstration Facility Design and Optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

McClanahan, Tucker C.; Gallmeier, Franz X.; Iverson, Erik B.

2017-02-01

The Spallation Neutron Source (SNS) facility at Oak Ridge National Laboratory (ORNL) is implementing a Moderator Demonstration Facility (MDF) to demonstrate the performance characteristics of advanced moderators central to the Second Target Station (STS) for SNS. The MDF will use the "spare" front-end installation within the SNS accelerator support complex – an ion source, radio-frequency quadrupole (RFQ) accelerator, and medium-energy beam transport (MEBT) chopper - to provide a 2.5 MeV proton beam of peak current 50 mA and maximum pulse length of less than 10 s at a repetition rate of no more than 60 Hz to a suitable neutron-producingmore » target to demonstrate those aspects of moderator performance necessary to meet the goals of the STS design e ort. The accelerator beam parameters are not open to variation beyond that described above - they are fixed by the nature of the spare front-end installation (the Integrated Test Stand Facility; ITSF). Accordingly, there are some neutronic challenges in developing prototypic moderator illumination from a very non-prototypic primary neutron source; the spallation source we are attempting to mimic has an extended neutron source volume approximately 40 cm long (in the direction of the proton beam), approximately 10 cm wide (horizontally transverse to the proton beam) and approximately 5 cm high (vertically transverse to the proton beam), and an isotropic evaporation energy spectrum with mean energy above 1 MeV. In contrast, the primary neutron source available from the 7Li(p,n) reaction (the most prolific at 2.5 MeV proton energy by more than an order of magnitude) is strongly anisotropic, with an energy spectrum that is both strongly dependent on emission angle and kinematically limited to less than 700 keV, and the interaction zone between the incident protons and any target material (neutron-producing or not) is intrinsically limited to a few tens of microns. The MDF will be unique and innovative amongst the world�
Design and Fabrication of Opacity Targets for the National Ignition Facility

DOE PAGES

Cardenas, Tana; Schmidt, Derek William; Dodd, Evan S.; ...

2017-12-22

Accurate models for opacity of partially ionized atoms are important for modeling and understanding stellar interiors and other high-energy-density phenomena such as inertial confinement fusion. Lawrence Livermore National Laboratory is leading a multilaboratory effort to conduct experiments on the National Ignition Facility (NIF) to try to reproduce recent opacity tests at the Sandia National Laboratory Z-facility. Since 2015, the NIF effort has evolved several hohlraum designs that consist of multiple pieces joined together. The target also has three components attached to the main stalk over a long distance with high tolerances that have resulted in several design iterations. The targetmore » has made use of rapid prototyped features to attach a capsule and collimator under the hohlraum while avoiding interference with the beams. Furthermore, this paper discusses the evolution of the hohlraum and overall target design and the challenges involved with fabricating and assembling these targets.« less
Design and Fabrication of Opacity Targets for the National Ignition Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cardenas, Tana; Schmidt, Derek William; Dodd, Evan S.

Accurate models for opacity of partially ionized atoms are important for modeling and understanding stellar interiors and other high-energy-density phenomena such as inertial confinement fusion. Lawrence Livermore National Laboratory is leading a multilaboratory effort to conduct experiments on the National Ignition Facility (NIF) to try to reproduce recent opacity tests at the Sandia National Laboratory Z-facility. Since 2015, the NIF effort has evolved several hohlraum designs that consist of multiple pieces joined together. The target also has three components attached to the main stalk over a long distance with high tolerances that have resulted in several design iterations. The targetmore » has made use of rapid prototyped features to attach a capsule and collimator under the hohlraum while avoiding interference with the beams. Furthermore, this paper discusses the evolution of the hohlraum and overall target design and the challenges involved with fabricating and assembling these targets.« less
Methodology for worker neutron exposure evaluation in the PDCF facility design.

PubMed

Scherpelz, R I; Traub, R J; Pryor, K H

2004-01-01

A project headed by Washington Group International is meant to design the Pit Disassembly and Conversion Facility (PDCF) to convert the plutonium pits from excessed nuclear weapons into plutonium oxide for ultimate disposition. Battelle staff are performing the shielding calculations that will determine appropriate shielding so that the facility workers will not exceed target exposure levels. The target exposure levels for workers in the facility are 5 mSv y(-1) for the whole body and 100 mSv y(-1) for the extremity, which presents a significant challenge to the designers of a facility that will process tons of radioactive material. The design effort depended on shielding calculations to determine appropriate thickness and composition for glove box walls, and concrete wall thicknesses for storage vaults. Pacific Northwest National Laboratory (PNNL) staff used ORIGEN-S and SOURCES to generate gamma and neutron source terms, and Monte Carlo (computer code for) neutron photon (transport) (MCNP-4C) to calculate the radiation transport in the facility. The shielding calculations were performed by a team of four scientists, so it was necessary to develop a consistent methodology. There was also a requirement for the study to be cost-effective, so efficient methods of evaluation were required. The calculations were subject to rigorous scrutiny by internal and external reviewers, so acceptability was a major feature of the methodology. Some of the issues addressed in the development of the methodology included selecting appropriate dose factors, developing a method for handling extremity doses, adopting an efficient method for evaluating effective dose equivalent in a non-uniform radiation field, modelling the reinforcing steel in concrete, and modularising the geometry descriptions for efficiency. The relative importance of the neutron dose equivalent compared with the gamma dose equivalent varied substantially depending on the specific shielding conditions and lessons
40 CFR 60.470 - Applicability and designation of affected facilities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Performance for Asphalt Processing and Asphalt Roofing Manufacture § 60.470 Applicability and designation of... mineral handling and storage facility at asphalt roofing plants; and each asphalt storage tank and each blowing still at asphalt processing plants, petroleum refineries, and asphalt roofing plants. (b) Any...
40 CFR 60.470 - Applicability and designation of affected facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Performance for Asphalt Processing and Asphalt Roofing Manufacture § 60.470 Applicability and designation of... mineral handling and storage facility at asphalt roofing plants; and each asphalt storage tank and each blowing still at asphalt processing plants, petroleum refineries, and asphalt roofing plants. (b) Any...
40 CFR 60.470 - Applicability and designation of affected facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Asphalt Processing and Asphalt Roofing Manufacture § 60.470 Applicability and designation of... mineral handling and storage facility at asphalt roofing plants; and each asphalt storage tank and each blowing still at asphalt processing plants, petroleum refineries, and asphalt roofing plants. (b) Any...
40 CFR 60.470 - Applicability and designation of affected facilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Performance for Asphalt Processing and Asphalt Roofing Manufacture § 60.470 Applicability and designation of... mineral handling and storage facility at asphalt roofing plants; and each asphalt storage tank and each blowing still at asphalt processing plants, petroleum refineries, and asphalt roofing plants. (b) Any...
40 CFR 60.470 - Applicability and designation of affected facilities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Performance for Asphalt Processing and Asphalt Roofing Manufacture § 60.470 Applicability and designation of... mineral handling and storage facility at asphalt roofing plants; and each asphalt storage tank and each blowing still at asphalt processing plants, petroleum refineries, and asphalt roofing plants. (b) Any...
40 CFR 60.150 - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Sewage Treatment Plants § 60.150 Applicability and designation of affected facility. (a) The... (dry basis) produced by municipal sewage treatment plants, or each incinerator that charges more than...
The Testing Behind the Test Facility: the Acoustic Design of the NASA Glenn Research Center's World-Class Reverberant Acoustic Test Facility

NASA Technical Reports Server (NTRS)

Hughes, William O.; McNelis, Mark E.; Hozman, Aron D.; McNelis, Anne M.

2010-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is leading the design and build of the new world-class vibroacoustic test capabilities at the NASA GRC s Plum Brook Station in Sandusky, Ohio, U.S.A. Benham Companies, LLC is currently constructing modal, base-shake sine and reverberant acoustic test facilities to support the future testing needs of NASA s space exploration program. The large Reverberant Acoustic Test Facility (RATF) will be approximately 101,000 ft3 in volume and capable of achieving an empty chamber acoustic overall sound pressure level (OASPL) of 163 dB. This combination of size and acoustic power is unprecedented amongst the world s known active reverberant acoustic test facilities. The key to achieving the expected acoustic test spectra for a range of many NASA space flight environments in the RATF is the knowledge gained from a series of ground acoustic tests. Data was obtained from several NASA-sponsored test programs, including testing performed at the National Research Council of Canada s acoustic test facility in Ottawa, Ontario, Canada, and at the Redstone Technical Test Center acoustic test facility in Huntsville, Alabama, U.S.A. The majority of these tests were performed to characterize the acoustic performance of the modulators (noise generators) and representative horns that would be required to meet the desired spectra, as well as to evaluate possible supplemental gas jet noise sources. The knowledge obtained in each of these test programs enabled the design of the RATF sound generation system to confidently advance to its final acoustic design and subsequent ongoing construction.
The Testing Behind The Test Facility: The Acoustic Design of the NASA Glenn Research Center's World-Class Reverberant Acoustic Test Facility

NASA Technical Reports Server (NTRS)

Hughes, William O.; McNelis, Mark E.; McNelis, Anne M.

2011-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is leading the design and build of the new world-class vibroacoustic test capabilities at the NASA GRC?s Plum Brook Station in Sandusky, Ohio, USA. Benham Companies, LLC is currently constructing modal, base-shake sine and reverberant acoustic test facilities to support the future testing needs of NASA?s space exploration program. T he large Reverberant Acoustic Test Facility (RATF) will be approximately 101,000 ft3 in volume and capable of achieving an empty chamber acoustic overall sound pressure level (OASPL) of 163 dB. This combination of size and acoustic power is unprecedented amongst the world?s known active reverberant acoustic test facilities. The key to achieving the expected acoustic test spectra for a range of many NASA space flight environments in the RATF is the knowledge gained from a series of ground acoustic tests. Data was obtained from several NASA-sponsored test programs, including testing performed at the National Research Council of Canada?s acoustic test facility in Ottawa, Ontario, Canada, and at the Redstone Technical Test Center acoustic test facility in Huntsville, Alabama, USA. The majority of these tests were performed to characterize the acoustic performance of the modulators (noise generators) and representative horns that would be required to meet the desired spectra, as well as to evaluate possible supplemental gas jet noise sources. The knowledge obtained in each of these test programs enabled the design of the RATF sound generation system to confidently advance to its final acoustic de-sign and subsequent on-going construction.
The Testing Behind The Test Facility: The Acoustic Design of the NASA Glenn Research Center's World-Class Reverberant Acoustic Test Facility

NASA Technical Reports Server (NTRS)

Hozman, Aron D.; Hughes, William O.; McNelis, Mark E.; McNelis, Anne M.

2011-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is leading the design and build of the new world-class vibroacoustic test capabilities at the NASA GRC's Plum Brook Station in Sandusky, Ohio, USA. Benham Companies, LLC is currently constructing modal, base-shake sine and reverberant acoustic test facilities to support the future testing needs of NASA's space exploration program. The large Reverberant Acoustic Test Facility (RATF) will be approximately 101,000 cu ft in volume and capable of achieving an empty chamber acoustic overall sound pressure level (OASPL) of 163 dB. This combination of size and acoustic power is unprecedented amongst the world's known active reverberant acoustic test facilities. The key to achieving the expected acoustic test spectra for a range of many NASA space flight environments in the RATF is the knowledge gained from a series of ground acoustic tests. Data was obtained from several NASA-sponsored test programs, including testing performed at the National Research Council of Canada's acoustic test facility in Ottawa, Ontario, Canada, and at the Redstone Technical Test Center acoustic test facility in Huntsville, Alabama, USA. The majority of these tests were performed to characterize the acoustic performance of the modulators (noise generators) and representative horns that would be required to meet the desired spectra, as well as to evaluate possible supplemental gas jet noise sources. The knowledge obtained in each of these test programs enabled the design of the RATF sound generation system to confidently advance to its final acoustic design and subsequent on-going construction.
A stochastic discrete optimization model for designing container terminal facilities

NASA Astrophysics Data System (ADS)

Zukhruf, Febri; Frazila, Russ Bona; Burhani, Jzolanda Tsavalista

2017-11-01

As uncertainty essentially affect the total transportation cost, it remains important in the container terminal that incorporates several modes and transshipments process. This paper then presents a stochastic discrete optimization model for designing the container terminal, which involves the decision of facilities improvement action. The container terminal operation model is constructed by accounting the variation of demand and facilities performance. In addition, for illustrating the conflicting issue that practically raises in the terminal operation, the model also takes into account the possible increment delay of facilities due to the increasing number of equipment, especially the container truck. Those variations expectantly reflect the uncertainty issue in the container terminal operation. A Monte Carlo simulation is invoked to propagate the variations by following the observed distribution. The problem is constructed within the framework of the combinatorial optimization problem for investigating the optimal decision of facilities improvement. A new variant of glow-worm swarm optimization (GSO) is thus proposed for solving the optimization, which is rarely explored in the transportation field. The model applicability is tested by considering the actual characteristics of the container terminal.
Accelerator shield design of KIPT neutron source facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhong, Z.; Gohar, Y.

Argonne National Laboratory (ANL) of the United States and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have been collaborating on the design development of a neutron source facility at KIPT utilizing an electron-accelerator-driven subcritical assembly. Electron beam power is 100 kW, using 100 MeV electrons. The facility is designed to perform basic and applied nuclear research, produce medical isotopes, and train young nuclear specialists. The biological shield of the accelerator building is designed to reduce the biological dose to less than 0.5-mrem/hr during operation. The main source of the biological dose is the photons and the neutrons generatedmore » by interactions of leaked electrons from the electron gun and accelerator sections with the surrounding concrete and accelerator materials. The Monte Carlo code MCNPX serves as the calculation tool for the shield design, due to its capability to transport electrons, photons, and neutrons coupled problems. The direct photon dose can be tallied by MCNPX calculation, starting with the leaked electrons. However, it is difficult to accurately tally the neutron dose directly from the leaked electrons. The neutron yield per electron from the interactions with the surrounding components is less than 0.01 neutron per electron. This causes difficulties for Monte Carlo analyses and consumes tremendous computation time for tallying with acceptable statistics the neutron dose outside the shield boundary. To avoid these difficulties, the SOURCE and TALLYX user subroutines of MCNPX were developed for the study. The generated neutrons are banked, together with all related parameters, for a subsequent MCNPX calculation to obtain the neutron and secondary photon doses. The weight windows variance reduction technique is utilized for both neutron and photon dose calculations. Two shielding materials, i.e., heavy concrete and ordinary concrete, were considered for the shield design. The main goal is to maintain
Fire Hazard Assessment in Supporting Fire Protection System Design of a Chemical Process Facility

DTIC Science & Technology

1996-08-01

CSDP/Studies/FireHaz –i– 3/28/97 FIRE HAZARD ASSESSMENT IN SUPPORTING FIRE PROTECTION SYSTEM DESIGN OF A CHEMICAL PROCESS FACILITY Ali Pezeshk...Joseph Chang, Dwight Hunt, and Peter Jahn Parsons Infrastructure & Technology Group, Inc. Pasadena, California 91124 ABSTRACT Because fires in a chemical ...Assessment in Supporting Fire Protection System Design of a Chemical Process Facility 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6
Advancing Translational Research through Facility Design in Non-AMC Hospitals.

PubMed

Pati, Debajyoti; Pietrzak, Michael P; Harvey, Thomas E; Armstrong, Walter B; Clarke, Robert; Weissman, Neil J; Rapp, Paul E; Smith, Mark S; Fairbanks, Rollin J; Collins, Jeffreyg M

2013-01-01

This article aims to explore the future of translational research and its physical design implications for community hospitals and hospitals not attached to large centralized research platforms. With a shift in medical services delivery focus to community wellness, continuum of care, and comparative effectiveness research, healthcare research will witness increasing pressure to include community-based practitioners. The roundtable discussion group, comprising 14 invited experts from 10 institutions representing the fields of biomedical research, research administration, facility planning and design, facility management, finance, and environmental design research, examined the issue in a structured manner. The discussion was conducted at the Washington Hospital Center, MedStar Health, Washington, D.C. Institutions outside the AMCs will be increasingly targeted for future research. Three factors are crucial for successful research in non-AMC hospitals: operational culture, financial culture, and information culture. An operating culture geared towards creation, preservation, and protection of spaces needed for research; creative management of spaces for financial accountability; and a flexible information infrastructure at the system level that enables complete link of key programmatic areas to academic IT research infrastructure are critical to success of research endeavors. Hospital, interdisciplinary, leadership, planning, work environment.

Man-vehicle systems research facility: Design and operating characteristics

NASA Technical Reports Server (NTRS)

1983-01-01

The Man-Vehicle Systems Research Facility (MVSRF) provides the capability of simulating aircraft (two with full crews), en route and terminal air traffic control and aircrew interactions, and advanced cockpit (1995) display representative of future generations of aircraft, all within the full mission context. The characteristics of this facility derive from research, addressing critical human factors issues that pertain to: (1) information requirements for the utilization and integration of advanced electronic display systems, (2) the interaction and distribution of responsibilities between aircrews and ground controllers, and (3) the automation of aircrew functions. This research has emphasized the need for high fidelity in simulations and for the capability to conduct full mission simulations of relevant aircraft operations. This report briefly describes the MVSRF design and operating characteristics.
Miniature Exoplanet Radial Velocity Array (MINERVA) I. Design, Commissioning, and First Science Results

NASA Astrophysics Data System (ADS)

Swift, Jonathan J.; Bottom, Michael; Johnson, John A.; Wright, Jason T.; McCrady, Nate; Wittenmyer, Robert A.; Plavchan, Peter; Riddle, Reed; Muirhead, Philip S.; Herzig, Erich; Myles, Justin; Blake, Cullen H.; Eastman, Jason; Beatty, Thomas G.; Barnes, Stuart I.; Gibson, Steven R.; Lin, Brian; Zhao, Ming; Gardner, Paul; Falco, Emilio; Criswell, Stephen; Nava, Chantanelle; Robinson, Connor; Sliski, David H.; Hedrick, Richard; Ivarsen, Kevin; Hjelstrom, Annie; de Vera, Jon; Szentgyorgyi, Andrew

2015-04-01

The Miniature Exoplanet Radial Velocity Array (MINERVA) is a U.S.-based observational facility dedicated to the discovery and characterization of exoplanets around a nearby sample of bright stars. MINERVA employs a robotic array of four 0.7-m telescopes outfitted for both high-resolution spectroscopy and photometry, and is designed for completely autonomous operation. The primary science program is a dedicated radial velocity survey and the secondary science objective is to obtain high-precision transit light curves. The modular design of the facility and the flexibility of our hardware allows for both science programs to be pursued simultaneously, while the robotic control software provides a robust and efficient means to carry out nightly observations. We describe the design of MINERVA, including major hardware components, software, and science goals. The telescopes and photometry cameras are characterized at our test facility on the Caltech campus in Pasadena, California, and their on-sky performance is validated. The design and simulated performance of the spectrograph is briefly discussed as we await its completion. New observations from our test facility demonstrate sub-mmag photometric precision of one of our radial velocity survey targets, and we present new transit observations and fits of WASP-52b-a known hot-Jupiter with an inflated radius and misaligned orbit. The process of relocating the MINERVA hardware to its final destination at the Fred Lawrence Whipple Observatory in southern Arizona has begun, and science operations are expected to commence in 2015.
Ant colony optimization for solving university facility layout problem

NASA Astrophysics Data System (ADS)

Mohd Jani, Nurul Hafiza; Mohd Radzi, Nor Haizan; Ngadiman, Mohd Salihin

2013-04-01

Quadratic Assignment Problems (QAP) is classified as the NP hard problem. It has been used to model a lot of problem in several areas such as operational research, combinatorial data analysis and also parallel and distributed computing, optimization problem such as graph portioning and Travel Salesman Problem (TSP). In the literature, researcher use exact algorithm, heuristics algorithm and metaheuristic approaches to solve QAP problem. QAP is largely applied in facility layout problem (FLP). In this paper we used QAP to model university facility layout problem. There are 8 facilities that need to be assigned to 8 locations. Hence we have modeled a QAP problem with n ≤ 10 and developed an Ant Colony Optimization (ACO) algorithm to solve the university facility layout problem. The objective is to assign n facilities to n locations such that the minimum product of flows and distances is obtained. Flow is the movement from one to another facility, whereas distance is the distance between one locations of a facility to other facilities locations. The objective of the QAP is to obtain minimum total walking (flow) of lecturers from one destination to another (distance).
A polar-drive-ignition design for the National Ignition Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, T. J. B.; Marozas, J. A.; Anderson, K. S.

2012-05-15

Polar drive [Skupsky et al., Phys. Plasmas 11, 2763 (2004)] will enable direct-drive experiments to be conducted on the National Ignition Facility (NIF) [Miller et al., Opt. Eng. 43, 2841 (2004)], while the facility is configured for x-ray drive. A polar-drive ignition design for the NIF has been developed that achieves a gain of 32 in two-dimensional (2-D) simulations, which include single- and multiple-beam nonuniformities and ice and outer-surface roughness. This design requires both single-beam UV polarization smoothing and one-dimensional (1-D) multi-frequency modulator (MFM) single-beam smoothing to achieve the required laser uniformity. The multi-FM smoothing is employed only during themore » low-intensity portion of the laser pulse, allowing for the use of sufficient smoothing-by-spectral-dispersion bandwidth while maintaining safe laser operations during the high-intensity part of the pulse. This target is robust to all expected sources of perturbations.« less
The influence of facility and home pen design on the welfare of the laboratory-housed dog.

PubMed

Scullion Hall, Laura E M; Robinson, Sally; Finch, John; Buchanan-Smith, Hannah M

We have an ethical and scientific obligation to Refine all aspects of the life of the laboratory-housed dog. Across industry there are many differences amongst facilities, home pen design and husbandry, as well as differences in features of the dogs such as strain, sex and scientific protocols. Understanding how these influence welfare, and hence scientific output is therefore critical. A significant proportion of dogs' lives are spent in the home pen and as such, the design can have a considerable impact on welfare. Although best practice guidelines exist, there is a paucity of empirical evidence to support the recommended Refinements and uptake varies across industry. In this study, we examine the effect of modern and traditional home pen design, overall facility design, husbandry, history of regulated procedures, strain and sex on welfare-indicating behaviours and mechanical pressure threshold. Six groups of dogs from two facilities (total n=46) were observed in the home pen and tested for mechanical pressure threshold. Dogs which were housed in a purpose-built modern facility or in a modern design home pen showed the fewest behavioural indicators of negative welfare (such as alert or pacing behaviours) and more indicators of positive welfare (such as resting) compared to those in a traditional home pen design or traditional facility. Welfare indicating behaviours did not vary consistently with strain, but male dogs showed more negative welfare indicating behaviours and had greater variation in these behaviours than females. Our findings showed more positive welfare indicating behaviours in dogs with higher mechanical pressure thresholds. We conclude that factors relating to the design of home pens and implementation of Refinements at the facility level have a significant positive impact on the welfare of laboratory-housed dogs, with a potential concomitant impact on scientific endpoints. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights
Design considerations for attaining 250-knot test velocities at the aircraft landing dynamics facility

NASA Technical Reports Server (NTRS)

Gray, C. E., Jr.; Snyder, R. E.; Taylor, J. T.; Cires, A.; Fitzgerald, A. L.; Armistead, M. F.

1980-01-01

Preliminary design studies are presented which consider the important parameters in providing 250 knot test velocities at the Aircraft Landing Dynamics Facility. Four major components of this facility are: the hydraulic jet catapult, the test carriage structure, the reaction turning bucket, and the wheels. Using the hydraulic-jet catapult characteristics, a target design point was selected and a carriage structure was sized to meet the required strength requirements. The preliminary design results indicate that to attain 250 knot test velocities for a given hydraulic jet catapult system, a carriage mass of 25,424 kg (56,000 lbm.) cannot be exceeded.
Distribution depot over-ocean second-destination transportation costs

DOT National Transportation Integrated Search

1996-12-10

The issue of over-ocean second-destination transportation costs was identified during our work in the Distribution Depot business area of the Audit of Revenue accounts in the FY 1996 Financial Statements of the Defense Business Operations Fund (the R...
Is patient-grouping on basis of condition on admission indicative for discharge destination in geriatric stroke patients after rehabilitation in skilled nursing facilities? The results of a cluster analysis.

PubMed

Buijck, Bianca I; Zuidema, Sytse U; Spruit-van Eijk, Monica; Bor, Hans; Gerritsen, Debby L; Koopmans, Raymond T C M

2012-12-04

Geriatric stroke patients are generally frail, have an advanced age and co-morbidity. It is yet unclear whether specific groups of patients might benefit differently from structured multidisciplinary rehabilitation programs. Therefore, the aims of our study are 1) to determine relevant patient characteristics to distinguish groups of patients based on their admission scores in skilled nursing facilities (SNFs), and (2) to study the course of these particular patient-groups in relation to their discharge destination. This is a longitudinal, multicenter, observational study. We collected data on patient characteristics, balance, walking ability, arm function, co-morbidity, activities of daily living (ADL), neuropsychiatric symptoms, and depressive complaints of 127 geriatric stroke patients admitted to skilled nursing facilities with specific units for geriatric rehabilitation after stroke. Cluster analyses revealed two groups: cluster 1 included patients in poor condition upon admission (n = 52), and cluster 2 included patients in fair/good condition upon admission (n = 75). Patients in both groups improved in balance, walking abilities, and arm function. Patients in cluster 1 also improved in ADL. Depressive complaints decreased significantly in patients in cluster 1 who were discharged to an independent- or assisted-living situation. Compared to 80% of the patients in cluster 2, a lower proportion (46%) of the patients in cluster 1 were discharged to an independent- or assisted-living situation. Stroke patients referred for rehabilitation to SNFs could be clustered on the basis of their condition upon admission. Although patients in poor condition on admission were more likely to be referred to a facility for long-term care, this was certainly not the case in all patients. Almost half of them could be discharged to an independent or assisted living situation, which implied that also in patients in poor condition on admission, discharge to an independent or
Generating an Open Reading Frame (ORF) Entry Clone and Destination Clone.

PubMed

Reece-Hoyes, John S; Walhout, Albertha J M

2018-01-02

This protocol describes using the Gateway recombinatorial cloning system to create an Entry clone carrying an open reading frame (ORF) and then to transfer the ORF into a Destination vector. In this example, BP recombination is used to clone an ORF from a cDNA source into the Donor vector pDONR 221. The ORF from the resulting Entry clone is then transferred into the Destination vector pDEST-15; the product (the Destination clone) will express the ORF as an amino-terminal GST-fusion. The technique can be used as a guide for cloning any other DNA fragment of interest-a promoter sequence or 3' untranslated region (UTR), for example-with substitutions of different genetic material such as genomic DNA, att sites, and vectors as required. The series of constructions and transformations requires 9-15 d, not including time that may be required for sequence confirmation, if desired/necessary. © 2018 Cold Spring Harbor Laboratory Press.
Two women with multiple disabilities sharing an acoustic orientation system and traveling together to indoor destinations.

PubMed

Lancioni, G E; Mantini, M

1998-12-01

This study assessed whether two women with total blindness and profound intellectual disability could share an acoustic orientation system and travel together simultaneously to common indoor destinations to perform occupational and vocational activities. The orientation system provided acoustic cues which indicated the direction to the destinations. Analysis of data indicated that the women were successful in sharing the system and could reach the destinations independently.
Destination Innovation: Episode 1 Kepler: Discovering New Worlds

NASA Image and Video Library

2012-01-06

Destination Innovation is a new series that explores the research, science and other projects underway at the NASA Ames Research Center. Episode 1 focuses on the Kepler Mission, a space telescope that is revolutionizing our knowledge of planets outside our Solar System.
Money for Research, Not for Energy Bills: Finding Energy and Cost Savings in High Performance Computer Facility Designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drewmark Communications; Sartor, Dale; Wilson, Mark

2010-07-01

High-performance computing facilities in the United States consume an enormous amount of electricity, cutting into research budgets and challenging public- and private-sector efforts to reduce energy consumption and meet environmental goals. However, these facilities can greatly reduce their energy demand through energy-efficient design of the facility itself. Using a case study of a facility under design, this article discusses strategies and technologies that can be used to help achieve energy reductions.
(US low-level radioactive waste management facility design, construction, and operation): Foreign trip report, July 22--30, 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Hoesen, S.D.; Bolinsky, J.

1989-08-02

The Martin Marietta Energy Systems, Inc., Team, consisting of representatives of the Engineering Division and Oak Ridge National Laboratory (ORNL), participated in a technology exchange program on French and US low-level radioactive waste (LLW) management facility design, construction, and operation. Meetings were held at the Agence National pour la Gestion des Dechets Radioactif (ANDRA) offices in Paris to review the designs for the new French LLW disposal facility, the Cente de Stockage de l'Aube (CSA), and the new ORNL LLW disposal project, the Interim Waste Management Facility (IWMF), and the results of the French LLW disposal facility cover experiment atmore » St. Sauveur. Visits were made to the operating LLW disposal facility, the Centre de Stockage de la Manche (CSM), the LLW conditioning facilities at the La Hague Reprocessing Facility, and the St. Saueveur Disposal Cap Experiment to discuss design, construction, and operating experience. A visit was also made to the CSA site to view the progress made in construction of the new facility.« less
Acoustics in Research Facilities--Control of Wanted and Unwanted Sound. Laboratory Design Notes.

ERIC Educational Resources Information Center

Newman, Robert B.

Common and special acoustics problems are discussed in relation to the design and construction of research facilities. Following a brief examination of design criteria for the control of wanted and unwanted sound, the technology for achieving desired results is discussed. Emphasis is given to various design procedures and materials for the control…
22 CFR 123.9 - Country of ultimate destination and approval of reexports or retransfers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ARMS REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.9 Country of ultimate destination... the Directorate of Defense Trade Controls must be obtained before reselling, transferring, reexporting, retransferring, transshipping, or disposing of a defense article to any end-user, end-use, or destination other...
Flux and permanence of risk perceptions: Tourists' perception of the relative and absolute risk for various destinations.

PubMed

Wolff, Katharina; Larsen, Svein

2016-12-01

The present investigation is a cross-sectional, multi-national, quantitative, and quasi-experimental comparison of tourists' risk perceptions regarding different destinations throughout the past decade. Over 10,000 tourists to Norway from 89 different countries filled in a questionnaire rating the perceived risk for various destinations. Data were collected during 2004, 2010, 2011, 2012, 2013 and 2015 and allow for a comparison of perceived risk across time, place and nationality. Results show that while absolute risk judgments for different destinations fluctuate somewhat over the years, relative risk judgments remain constant. Findings also reveal a "home-is-safer-then-abroad-bias" with tourists consistently perceiving their home country among the safest destinations. The current investigation is rare because it looks at more than one destination at a time. Insights gained from the present findings diverge from what would have been concluded from employing case studies, that is, looking at one destination at a time. © 2016 The Authors. Scandinavian Journal of Psychology published by Scandinavian Psychological Associations and John Wiley & Sons Ltd.
Planning and Designing Safe Facilities

ERIC Educational Resources Information Center

Seidler, Todd

2006-01-01

Those who manage physical education, athletic, and recreation programs have a number of legal duties that they are expected to carry out. Among these are an obligation to take reasonable precautions to ensure safe programs and facilities for all participants, spectators, and staff. Physical education and sports facilities that are poorly planned,…
The Participative Design of an Endoscopy Facility using Lean 3P

PubMed Central

Smith, Iain

2016-01-01

In the UK, bowel cancer is the second largest cancer killer. Diagnosing people earlier can save lives but demand for endoscopies is increasing and this can put pressure on waiting times. To address this challenge, an endoscopy unit in North East England decided to improve their facilities to increase capacity and create environments that improve the experience of users. This presented a significant opportunity for step change improvement but also a problem in terms of creating designs that meet user requirements whilst addressing structural or space constraints. The Lean design process known as ‘3P' (standing for the production preparation process) was utilised as a participative design strategy to engage stakeholders in the design of the new department. This involved a time-out workshop (or 3P event) in which Lean and participative design tools were utilised to create an innovative design based on ‘point of delivery' (POD) principles. The team created a design that demonstrated an increase in treatment room capacity by 25% and bed capacity by 70% whilst reducing travel distance for patients by 25.8% and staff by 27.1%. This was achieved with an increase in available space of only 13%. The Lean 3P method provided a structured approach for corporate and clinical staff to work together with patient representatives as cross-functional teams. This participative approach facilitated communication and learning between stakeholders about care processes and personal preferences. Lean 3P therefore appears to be a promising approach to improving the healthcare facilities design process to meet user requirements. PMID:27493744
Facility Management as Part of an Integrated Design of Civil Engineering Structures

NASA Astrophysics Data System (ADS)

Hyben, Ivan; Podmanický, Peter

2014-11-01

The present article deals about facility management, as still relatively young component of an integrated planning and design of buildings. Attention is focused on the area of the proposal, which can greatly affect to amount of future operating costs. Operational efficiency has been divided into individual components and satisfaction with the solution of buildings already constructed was assessed by workers, who are actually dedicated facility management in these organizations. The results were then assessed and evaluated through regression analysis. The aim of this paper is to determine to what extent is desired update project documentation of new buildings from the perspective of facility management.
Durability of a reinforced concrete designed for the construction of an intermediate-level radioactive waste disposal facility

NASA Astrophysics Data System (ADS)

Duffó, G. S.; Arva, E. A.; Schulz, F. M.; Vazquez, D. R.

2012-01-01

The National Atomic Energy Commission of the Argentine Republic is developing a nuclear waste disposal management programme that contemplates the design and construction of a facility for the final disposal of intermediate-level radioactive wastes. The repository is based on the use of multiple, independent and redundant barriers. The major components are made in reinforced concrete so, the durability of these structures is an important aspect for the facility integrity. This work presents an investigation performed on a reinforced concrete specifically designed for this purpose, to predict the service life of the intermediate level radioactive waste disposal facility from data obtained with several techniques. Results obtained with corrosion sensors embedded in a concrete prototype are also included. The information obtained will be used for the final design of the facility in order to guarantee a service life more or equal than the foreseen durability for this type of facilities.

Design and Development of a New Facility for Teaching and Research in Clinical Anatomy

ERIC Educational Resources Information Center

Greene, John Richard T.

2009-01-01

This article discusses factors in the design, commissioning, project management, and intellectual property protection of developments within a new clinical anatomy facility in the United Kingdom. The project was aimed at creating cost-effective facilities that would address widespread concerns over anatomy teaching, and support other activities…
22 CFR 123.9 - Country of ultimate destination and approval of reexports or retransfers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... ARMS REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.9 Country of ultimate destination... the Directorate of Defense Trade Controls must be obtained before reselling, transferring, transshipping, or disposing of a defense article to any end user, end use or destination other than as stated on...
International Space University variable gravity research facility design

NASA Astrophysics Data System (ADS)

Bailey, Sheila G.; Chiaramonte, Francis P.; Davidian, Kenneth J.

1994-03-01

A manned mission to Mars will require long travel times between Earth and Mars. However, exposure to long-duration zero gravity is known to be harmful to the human body. Some of the harmful effects are loss of heart and lung capacity, inability to stand upright, muscular weakness, and loss of bone calcium. A variable gravity research facility (VGRF) that will be placed in low Earth orbit (LEO) was designed by students of the International Space University 1989 Summer Session held in Strasbourg, France, to provide a testbed for conducting experiments in the life and physical sciences in preparation for a mission to Mars. This design exercise was unique because it addressed all aspects concerning a large space project. This report describes the VGRF design that was developed by international participants specializing in the following areas: the politics of international cooperation; engineering, architecture; in-space physiological, materials, and life science experimentation; data communications; and business and management.
Design philosophy and operating experience with the WNRE Hot Cell Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, R.G.; Seymour, C.G.; Ryz, M.A.

1969-10-15

The objective of radiation safety and operating efficiency often conflict. The key to preventing this conflict is proper design. In this paper we discuss how both objectives have been met in the Whiteshell Nuclear Research Establishment (WNRE) Hot Cell Facilities.
The design of the optical Thomson scattering diagnostic for the National Ignition Facility.

PubMed

Datte, P S; Ross, J S; Froula, D H; Daub, K D; Galbraith, J; Glenzer, S; Hatch, B; Katz, J; Kilkenny, J; Landen, O; Manha, D; Manuel, A M; Molander, W; Montgomery, D; Moody, J; Swadling, G F; Weaver, J

2016-11-01

The National Ignition Facility (NIF) is a 192 laser beam facility designed to support the Stockpile Stewardship, High Energy Density and Inertial Confinement Fusion (ICF) programs. We report on the design of an Optical Thomson Scattering (OTS) diagnostic that has the potential to transform the community's understanding of NIF hohlraum physics by providing first principle, local, time-resolved measurements of under-dense plasma conditions. The system design allows operation with different probe laser wavelengths by manual selection of the appropriate beam splitter and gratings before the shot. A deep-UV probe beam (λ 0 -210 nm) will be used to optimize the scattered signal for plasma densities of 5 × 10 20 electrons/cm 3 while a 3ω probe will be used for experiments investigating lower density plasmas of 1 × 10 19 electrons/cm 3 . We report the phase I design of a two phase design strategy. Phase I includes the OTS telescope, spectrometer, and streak camera; these will be used to assess the background levels at NIF. Phase II will include the design and installation of a probe laser.
NASA Technology Area 07: Human Exploration Destination Systems Roadmap

NASA Technical Reports Server (NTRS)

Kennedy, Kriss J.; Alexander, Leslie; Landis, Rob; Linne, Diane; Mclemore, Carole; Santiago-Maldonado, Edgardo; Brown, David L.

2011-01-01

This paper gives an overview of the National Aeronautics and Space Administration (NASA) Office of Chief Technologist (OCT) led Space Technology Roadmap definition efforts. This paper will given an executive summary of the technology area 07 (TA07) Human Exploration Destination Systems (HEDS). These are draft roadmaps being reviewed and updated by the National Research Council. Deep-space human exploration missions will require many game changing technologies to enable safe missions, become more independent, and enable intelligent autonomous operations and take advantage of the local resources to become self-sufficient thereby meeting the goal of sustained human presence in space. Taking advantage of in-situ resources enhances and enables revolutionary robotic and human missions beyond the traditional mission architectures and launch vehicle capabilities. Mobility systems will include in-space flying, surface roving, and Extra-vehicular Activity/Extravehicular Robotics (EVA/EVR) mobility. These push missions will take advantage of sustainability and supportability technologies that will allow mission independence to conduct human mission operations either on or near the Earth, in deep space, in the vicinity of Mars, or on the Martian surface while opening up commercialization opportunities in low Earth orbit (LEO) for research, industrial development, academia, and entertainment space industries. The Human Exploration Destination Systems (HEDS) Technology Area (TA) 7 Team has been chartered by the Office of the Chief Technologist (OCT) to strategically roadmap technology investments that will enable sustained human exploration and support NASA s missions and goals for at least the next 25 years. HEDS technologies will enable a sustained human presence for exploring destinations such as remote sites on Earth and beyond including, but not limited to, LaGrange points, low Earth orbit (LEO), high Earth orbit (HEO), geosynchronous orbit (GEO), the Moon, near
Space Station Furnace Facility. Volume 1: Requirements definition and conceptual design study, executive summary

NASA Technical Reports Server (NTRS)

1992-01-01

The Space Station Freedom Furnace (SSFF) Study was awarded on June 2, 1989, to Teledyne Brown Engineering (TBE) to define an advanced facility for materials research in the microgravity environment of Space Station Freedom (SSF). The SSFF will be designed for research in the solidification of metals and alloys, the crystal growth of electronic and electro-optical materials, and research in glasses and ceramics. The SSFF is one of the first 'facility' class payloads planned by the Microgravity Science and Applications Division (MSAD) of the Office of Space Science and Applications of NASA Headquarters. This facility is planned for early deployment during man-tended operations of the SSF with continuing operations through the Permanently Manned Configuration (PMC). The SSFF will be built around a general 'Core' facility which provides common support functions not provided by SSF, common subsystems which are best centralized, and common subsystems which are best distributed with each experiment module. The intent of the facility approach is to reduce the overall cost associated with implementing and operating a variety of experiments. This is achieved by reducing the launch mass and simplifying the hardware development and qualification processes associated with each experiment. The Core will remain on orbit and will require only periodic maintenance and upgrading while new Furnace Modules, samples, and consumables are developed, qualified, and transported to the SSF. The SSFF Study was divided into two phases: phase 1, a definition study phase, and phase 2, a design and development phase. The definition phase 1 is addressed. Phase 1 was divided into two parts. In the first part, the basic part of the effort, covered the preliminary definition and assessment of requirements; conceptual design of the SSFF; fabrication of mockups; and the preparation for and support of the Conceptual Design Review (CoDR). The second part, the option part, covered requirements update and
Yucca Mountain Project Subsurface Facilities Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

A. Linden; R.S. Saunders; R.J. Boutin

2002-11-19

Four units of the Topopah Springs formation (volcanic tuff) are considered for the proposed repository: the upper lithophysal, the middle non-lithophysal, the lower lithophysal, and the lower non-lithophysal. Yucca Mountain was recently designated the site for a proposed repository to dispose of spent nuclear fuel and high-level radioactive waste. Work is proceeding to advance the design of subsurface facilities to accommodate emplacing waste packages in the proposed repository. This paper summarized recent progress in the design of subsurface layout of the proposed repository. The original Site Recommendation (SR) concept for the subsurface design located the repository largely within the lowermore » lithophysal zone (approximately 73%) of the Topopah The Site Recommendation characterized area suitable for emplacement consisted of the primary upper block, the lower block and the southern upper block extension. The primary upper block accommodated the mandated 70,000 metric tons of heavy metal (MTHM) at a 1.45 kW/m hear heat load. Based on further study of the Site Recommendation concept, the proposed repository siting area footprint was modified to make maximum use of available site characterization data, and thus, reduce uncertainties associated with performance assessment. As a result of this study, a modified repository footprint has been proposed and is presently being review for acceptance by the DOE. A panel design concept was developed to reduce overall costs and reduce the overall emplacement schedule. This concept provides flexibility to adjust the proposed repository subsurface layout with time, as it makes it unnecessary to ''commit'' to development of a large single panel at the earliest stages of construction. A description of the underground layout configuration and influencing factors that affect the layout configuration are discussed in the report.« less
A Randomized Trial of Heart Failure Disease Management in Skilled Nursing Facilities: Design and Rationale

PubMed Central

Boxer, Rebecca S.; Dolansky, Mary A.; Bodnar, Christine A.; Singer, Mendel E.; Albert, Jeffery M.; Gravenstein, Stefan

2013-01-01

Background Heart failure disease management can improve health outcomes for older community dwelling patients with heart failure. Heart failure disease management has not been studied in skilled nursing facilities, a major site of transitional care for older adults. Methods and Anticipated Results The objective of this trial is to investigate if a heart failure disease management program (HF-DMP) in skilled nursing facilities (SNF) will decrease all-cause rehospitalizations for the first 60 days post SNF admission. The trial is a randomized cluster trial to be conducted in 12 for-profit SNF in the greater Cleveland area. The study population is inclusive of patients with heart failure regardless of ejection fraction but excludes those patients on dialysis and with a life expectancy of 6 months or less. The HF-DMP includes 7 elements considered standard of care for patients with heart failure: documentation of left ventricular function, tracking of weight and symptoms, medication titration, discharge instructions, 7 day follow up appointment post SNF discharge, patient education. The HF-DMP is conducted by a research nurse tasked with adhering to each element of the program and regularly audited to maintain fidelity of the program. Additional outcomes include health status, self-care management, and discharge destination. Conclusion The SNF-Connect Trial is the first trial of its kind to assess if a HF-DMP will improve outcomes for patients in SNFs. This trial will provide evidence on the effectiveness of HF-DMP to improve outcomes for older frail heart failure patients undergoing post-acute rehabilitation. PMID:23871475
A randomized trial of heart failure disease management in skilled nursing facilities: design and rationale.

PubMed

Boxer, Rebecca S; Dolansky, Mary A; Bodnar, Christine A; Singer, Mendel E; Albert, Jeffery M; Gravenstein, Stefan

2013-09-01

Heart failure (HF) disease management can improve health outcomes for older community dwelling patients with heart failure. HF disease management has not been studied in skilled nursing facilities, a major site of transitional care for older adults. The objective of this trial is to investigate if a HF- disease management program (HF-DMP) in skilled nursing facilities (SNF)s will decrease all-cause rehospitalizations for the first 60 days post-SNF admission. The trial is a randomized cluster trial to be conducted in 12 for-profit SNF in the greater Cleveland area. The study population is inclusive of patients with HF regardless of ejection fraction but excludes those patients on dialysis and with a life expectancy of 6 months or less. The HF-DMP includes 7 elements considered standard of care for patients with HF documentation of left ventricular function, tracking of weight and symptoms, medication titration, discharge instructions, 7-day follow-up appointment post-SNF discharge, and patient education. The HF-DMP is conducted by a research nurse tasked with adhering to each element of the program and regularly audited to maintain fidelity of the program. Additional outcomes include health status, self-care management, and discharge destination. The SNF-Connect Trial is the first trial of its kind to assess if a HF-DMP will improve outcomes for patients in SNFs. This trial will provide evidence on the effectiveness of HF-DMP to improve outcomes for older frail HF patients undergoing postacute rehabilitation. Copyright © 2013 American Medical Directors Association, Inc. Published by Elsevier Inc. All rights reserved.
Titan: a distant but enticing destination for human visitors.

PubMed

Nott, Julian

2009-10-01

Until recently, very little was known about Saturn's largest satellite, Titan. But that has changed dramatically since the Cassini spacecraft started orbiting in the Saturn system in 2004. Larger than Mercury and with a dense atmosphere, Titan has many of the characteristics of a planet. Indeed, many scientists now see it as the most interesting place in the Solar System for robotic exploration, with many unique features and even the possibility of exotic forms of life. This paper points out that Titan is also a potential destination for humans. With its predominantly nitrogen atmosphere, moderate gravity, and available water and oxygen, it also appears that, once it becomes possible to travel there, it will prove to be much more hospitable for human visitors than any other destination in the Solar System.
New Spaces for Learning: Designing College Facilities to Utilize Instructional Aids and Media. Revised.

ERIC Educational Resources Information Center

Hauf, Harold D.; And Others

Colleges need appropriate large group instructional facilities for effective and efficient use of instructional aids and media. A well planned system of facilities must provide space for learning; production, origination, and support; storage and retrieval. Design begins with a building plan--a statement, made jointly by the administrator and…
Destination Entry And Retrieval With The Ali-Scout Navigation System Fast-Trac Phase Iib Deliverable

DOT National Transportation Integrated Search

1996-12-01

AFTER TRAINING, 36 DRIVERS RETRIEVED AND ENTERED A TOTAL OF 20 DESTINATIONS USING AN ALI-SCOUT NAVIGATION COMPUTER AND 10 DESTINATIONS USING A TOUCHSCREEN SIMULATION WHILE SITTING IN A VEHICLE MOCKUP. RETRIEVAL INVOLVED KEYING IN PART OF THE DESTINAT...
Design and construction of a full-scale lateral impact testing facility.

DOT National Transportation Integrated Search

2015-05-01

The goal of this work is to design and construct a full scale lateral impact testing facility that is capable of recreating the damage that would be created by an overheight vehicle collision. This was accomplished by impacting a test specimen with 8...
Conceptual design of BNCT facility based on the TRR medical room

NASA Astrophysics Data System (ADS)

Golshanian, M.; Rajabi, A. A.; Kasesaz, Y.

2017-10-01

This paper presents a conceptual design of the Boron Neutron Capture Therapy (BNCT) facility based on the medical room of Tehran Research Reactor (TRR). The medical room is located behind the east wall of the reactor pool. The designed beam line is an in-pool Beam Shaping Assembly (BSA) which is considered between the reactor core and the medical room wall. The final designed BSA can provide 2.96× 109 n/cm2ṡs epithermal neutron flux at the irradiation position with acceptable beam contamination to use as a clinical BNCT.
Technical and design update in the AUBE French low-level radioactive waste disposal facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marque, Y.

1989-01-01

Long-term industrial management of radioactive waste in France is carried out by the Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA). ANDRA is in charge of design, siting, construction, and operation of disposal centers. The solution selected in France for the disposal of low- and medium-level, short-lived radioactive waste is near-surface disposal in the earth using the principle of multiple barriers, in accordance with national safety rules and regulations, and based on operating experience from the Centre de Stockage de la Manche. Since the center's start-up in 1969, 400,000 m{sup 3} of waste have been disposed of. The Frenchmore » national program for waste management is proceeding with the construction of a second near-surface disposal, which is expected to be operational in 1991. It is located in the department of AUBE (from which its name derives), 100 miles southeast of Paris. The paper describes the criteria for siting and design of the AUBE disposal facility, design of the AUBE facility disposal module, and comparison with North Carolina and Pennsylvania disposal facility designs.« less
Facility Design and Health Management Program at the Sinnhuber Aquatic Research Laboratory

PubMed Central

Barton, Carrie L.; Johnson, Eric W.

2016-01-01

Abstract The number of researchers and institutions moving to the utilization of zebrafish for biomedical research continues to increase because of the recognized advantages of this model. Numerous factors should be considered before building a new or retooling an existing facility. Design decisions will directly impact the management and maintenance costs. We and others have advocated for more rigorous approaches to zebrafish health management to support and protect an increasingly diverse portfolio of important research. The Sinnhuber Aquatic Research Laboratory (SARL) is located ∼3 miles from the main Oregon State University campus in Corvallis, Oregon. This facility supports several research programs that depend heavily on the use of adult, larval, and embryonic zebrafish. The new zebrafish facility of the SARL began operation in 2007 with a commitment to build and manage an efficient facility that diligently protects human and fish health. An important goal was to ensure that the facility was free of Pseudoloma neurophilia (Microsporidia), which is very common in zebrafish research facilities. We recognize that there are certain limitations in space, resources, and financial support that are institution dependent, but in this article, we describe the steps taken to build and manage an efficient specific pathogen-free facility. PMID:26981844
Facility Design and Health Management Program at the Sinnhuber Aquatic Research Laboratory.

PubMed

Barton, Carrie L; Johnson, Eric W; Tanguay, Robert L

2016-07-01

The number of researchers and institutions moving to the utilization of zebrafish for biomedical research continues to increase because of the recognized advantages of this model. Numerous factors should be considered before building a new or retooling an existing facility. Design decisions will directly impact the management and maintenance costs. We and others have advocated for more rigorous approaches to zebrafish health management to support and protect an increasingly diverse portfolio of important research. The Sinnhuber Aquatic Research Laboratory (SARL) is located ∼3 miles from the main Oregon State University campus in Corvallis, Oregon. This facility supports several research programs that depend heavily on the use of adult, larval, and embryonic zebrafish. The new zebrafish facility of the SARL began operation in 2007 with a commitment to build and manage an efficient facility that diligently protects human and fish health. An important goal was to ensure that the facility was free of Pseudoloma neurophilia (Microsporidia), which is very common in zebrafish research facilities. We recognize that there are certain limitations in space, resources, and financial support that are institution dependent, but in this article, we describe the steps taken to build and manage an efficient specific pathogen-free facility.
Proliferation resistance assessments during the design phase of a recycling facility as a means of reducing proliferation risks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lindell, M.A.; Grape, S.; Haekansson, A.

The sustainability criterion for Gen IV nuclear energy systems inherently presumes the availability of efficient fuel recycling capabilities. One area for research on advanced fuel recycling concerns safeguards aspects of this type of facilities. Since a recycling facility may be considered as sensitive from a non-proliferation perspective, it is important to address these issues early in the design process, according to the principle of Safeguards By Design. Presented in this paper is a mode of procedure, where assessments of the proliferation resistance (PR) of a recycling facility for fast reactor fuel have been performed so as to identify the weakestmore » barriers to proliferation of nuclear material. Two supplementing established methodologies have been applied; TOPS (Technological Opportunities to increase Proliferation resistance of nuclear power Systems) and PR-PP (Proliferation Resistance and Physical Protection evaluation methodology). The chosen fuel recycling facility belongs to a small Gen IV lead-cooled fast reactor system that is under study in Sweden. A schematic design of the recycling facility, where actinides are separated using solvent extraction, has been examined. The PR assessment methodologies make it possible to pinpoint areas in which the facility can be improved in order to reduce the risk of diversion. The initial facility design may then be slightly modified and/or safeguards measures may be introduced to reduce the total identified proliferation risk. After each modification of design and/or safeguards implementation, a new PR assessment of the revised system can then be carried out. This way, each modification can be evaluated and new ways to further enhance the proliferation resistance can be identified. This type of iterative procedure may support Safeguards By Design in the planning of new recycling plants and other nuclear facilities. (authors)« less
Skylab Medical Experiments Altitude Test /SMEAT/ facility design and operation.

NASA Technical Reports Server (NTRS)

Hinners, A. H., Jr.; Correale, J. V.

1973-01-01

This paper presents the design approaches and test facility operation methods used to successfully accomplish a 56-day test for Skylab to permit evaluation of selected Skylab medical experiments in a ground test simulation of the Skylab environment with an astronaut crew. The systems designed for this test include the two-gas environmental control system, the fire suppression and detection system, equipment transfer lock, ground support equipment, safety systems, potable water system, waste management system, lighting and power system, television monitoring, communications and recreation systems, and food freezer.

Risks of visiting snow destinations: an analysis of skiers' views.

PubMed

Carús, Luis

2010-03-01

Very little research exists regarding the risks of visiting snow destinations. This study attempts to bridge this gap through insights into skiers' perceptions of risk, of great relevance to snow industry stakeholders, by identifying factors that influence skiers. The research was conducted in the Spanish Pyrenees, using information gathered from adult members of two ski clubs that regularly visit this snow destination. Skiing risks, accommodation risks and public safety risks were found to have the most important bearing on visitors' risk perceptions. However, actual figures demonstrate that respondents had some difficulties in assessing the typicality of the risk items and tended to misjudge the true level of the risks. Copyright 2009 Elsevier Ltd. All rights reserved.
Access to commercial destinations within the neighbourhood and walking among Australian older adults.

PubMed

Nathan, Andrea; Pereira, Gavin; Foster, Sarah; Hooper, Paula; Saarloos, Dick; Giles-Corti, Billie

2012-11-20

Physical activity, particularly walking, is greatly beneficial to health; yet a sizeable proportion of older adults are insufficiently active. The importance of built environment attributes for walking is known, but few studies of older adults have examined neighbourhood destinations and none have investigated access to specific, objectively-measured commercial destinations and walking. We undertook a secondary analysis of data from the Western Australian state government's health surveillance survey for those aged 65-84 years and living in the Perth metropolitan region from 2003-2009 (n = 2,918). Individual-level road network service areas were generated at 400 m and 800 m distances, and the presence or absence of six commercial destination types within the neighbourhood service areas identified (food retail, general retail, medical care services, financial services, general services, and social infrastructure). Adjusted logistic regression models examined access to and mix of commercial destination types within neighbourhoods for associations with self-reported walking behaviour. On average, the sample was aged 72.9 years (SD = 5.4), and was predominantly female (55.9%) and married (62.0%). Overall, 66.2% reported some weekly walking and 30.8% reported sufficient walking (≥150 min/week). Older adults with access to general services within 400 m (OR = 1.33, 95% CI = 1.07-1.66) and 800 m (OR = 1.20, 95% CI = 1.02-1.42), and social infrastructure within 800 m (OR = 1.19, 95% CI = 1.01-1.40) were more likely to engage in some weekly walking. Access to medical care services within 400 m (OR = 0.77, 95% CI = 0.63-0.93) and 800 m (OR = 0.83, 95% CI = 0.70-0.99) reduced the odds of sufficient walking. Access to food retail, general retail, financial services, and the mix of commercial destination types within the neighbourhood were all unrelated to walking. The types of neighbourhood commercial destinations that encourage older adults to walk appear to differ slightly
Educational Facility Design and Project Based Learning: "The Real Connection"

ERIC Educational Resources Information Center

Schrader, David L.; Sole, John

2009-01-01

There is a case to be made for the integration of the Project Based Service Learning (PBSL) process and the design and construction of educational facilities. A growing body of research supports the notion that the formulaic educational system of the last hundred years may no longer serve the learning styles of new and future generations. Their…
Does activity limitation predict discharge destination for postacute care patients?

PubMed

Chang, Feng-Hang; Ni, Pengsheng; Jette, Alan M

2014-09-01

This study aimed to examine the ability of different domains of activity limitation to predict discharge destination (home vs. nonhome settings) 1 mo after hospital discharge for postacute rehabilitation patients. A secondary analysis was conducted using a data set of 518 adults with neurologic, lower extremity orthopedic, and complex medical conditions followed after discharge from a hospital into postacute care. Variables collected at baseline include activity limitations (basic mobility, daily activity, and applied cognitive function, measured by the Activity Measure for Post-Acute Care), demographics, diagnosis, and cognitive status. The discharge destination was recorded at 1 mo after being discharged from the hospital. Correlational analyses revealed that the 1-mo discharge destination was correlated with two domains of activity (basic mobility and daily activity) and cognitive status. However, multiple logistic regression and receiver operating characteristic curve analyses showed that basic mobility functioning performed the best in discriminating home vs. nonhome living. This study supported the evidence that basic mobility functioning is a critical determinant of discharge home for postacute rehabilitation patients. The Activity Measure for Post-Acute Care-basic mobility showed good usability in discriminating home vs. nonhome living. The findings shed light on the importance of basic mobility functioning in the discharge planning process.
The Langley thermal protection system test facility: A description including design operating boundaries

NASA Technical Reports Server (NTRS)

Klich, G. F.

1976-01-01

A description of the Langley thermal protection system test facility is presented. This facility was designed to provide realistic environments and times for testing thermal protection systems proposed for use on high speed vehicles such as the space shuttle. Products from the combustion of methane-air-oxygen mixtures, having a maximum total enthalpy of 10.3 MJ/kg, are used as a test medium. Test panels with maximum dimensions of 61 cm x 91.4 cm are mounted in the side wall of the test region. Static pressures in the test region can range from .005 to .1 atm and calculated equilibrium temperatures of test panels range from 700 K to 1700 K. Test times can be as long as 1800 sec. Some experimental data obtained while using combustion products of methane-air mixtures are compared with theory, and calibration of the facility is being continued to verify calculated values of parameters which are within the design operating boundaries.
Data reduction complex analog-to-digital data processing requirements for onsite test facilities

NASA Technical Reports Server (NTRS)

Debbrecht, J. D.

1976-01-01

The analog to digital processing requirements of onsite test facilities are described. The source and medium of all input data to the Data Reduction Complex (DRC) and the destination and medium of all output products of the analog-to-digital processing are identified. Additionally, preliminary input and output data formats are presented along with the planned use of the output products.
Facility Systems, Ground Support Systems, and Ground Support Equipment General Design Requirements

NASA Technical Reports Server (NTRS)

Thaxton, Eric A.; Mathews, Roger E.

2014-01-01

This standard establishes requirements and guidance for design and fabrication of ground systems (GS) that includes: ground support equipment (GSE), ground support systems (GSS), and facility ground support systems (F GSS) to provide uniform methods and processes for design and development of robust, safe, reliable, maintainable, supportable, and cost-effective GS in support of space flight and institutional programs and projects.
36 CFR 1192.39 - Destination and route signs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Destination and route signs. 1192.39 Section 1192.39 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... (generally, the space between letters shall be 1/16 the height of upper case letters), and shall contrast...
36 CFR 1192.39 - Destination and route signs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Destination and route signs. 1192.39 Section 1192.39 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... (generally, the space between letters shall be 1/16 the height of upper case letters), and shall contrast...
Differences of Perceived Image Generated through the Web Site: Empirical Evidence Obtained in Spanish Destinations

PubMed Central

Blazquez-Resino, Juan J.; Muro-Rodriguez, Ana I.; Perez-Jimenez, Israel R.

2016-01-01

In this paper, a study of the perceived destination image created by promotional Web Pages is expounded in an attempt to identify their differences as generators of destination image in the consumers' mind. Specifically, it seeks to analyse whether the web sites of different Spanish regions improve the image that consumers have of the destination, identifying their main dimensions and analysing its effect on satisfaction and intentions of the future behavior of potential visitors. To achieve these objectives and verify the hypotheses, a laboratory experiment was performed, where it was determined what changes are produced in the tourist's previous image after browsing the tourist webs of three different regions. Moreover, it analyses the differences in the effect of the perceived image on satisfaction and potential visitors' future behavioral intentions. The results obtained enable us to identify differences in the composition of the perceived image according to the destination, while confirming the significant effect of different perceived image dimensions regarding satisfaction. The results allow managers to gain a better understanding of the effectiveness of their sites from a consumer perspective as well as suggestions to follow in order to achieve greater efficiency in their communication actions in order to improve the motivation of visitors to go to the destination. PMID:27933027
Differences of Perceived Image Generated through the Web Site: Empirical Evidence Obtained in Spanish Destinations.

PubMed

Blazquez-Resino, Juan J; Muro-Rodriguez, Ana I; Perez-Jimenez, Israel R

2016-01-01

In this paper, a study of the perceived destination image created by promotional Web Pages is expounded in an attempt to identify their differences as generators of destination image in the consumers' mind. Specifically, it seeks to analyse whether the web sites of different Spanish regions improve the image that consumers have of the destination, identifying their main dimensions and analysing its effect on satisfaction and intentions of the future behavior of potential visitors. To achieve these objectives and verify the hypotheses, a laboratory experiment was performed, where it was determined what changes are produced in the tourist's previous image after browsing the tourist webs of three different regions. Moreover, it analyses the differences in the effect of the perceived image on satisfaction and potential visitors' future behavioral intentions. The results obtained enable us to identify differences in the composition of the perceived image according to the destination, while confirming the significant effect of different perceived image dimensions regarding satisfaction. The results allow managers to gain a better understanding of the effectiveness of their sites from a consumer perspective as well as suggestions to follow in order to achieve greater efficiency in their communication actions in order to improve the motivation of visitors to go to the destination.
The Effect of the Social and Physical Environment on Children's Independent Mobility to Neighborhood Destinations.

PubMed

Christian, Hayley E; Klinker, Charlotte D; Villanueva, Karen; Knuiman, Matthew W; Foster, Sarah A; Zubrick, Stephan R; Divitini, Mark; Wood, Lisa; Giles-Corti, Billie

2015-06-16

Relationships between context-specific measures of the physical and social environment and children's independent mobility to neighborhood destination types were examined. Parents in RESIDE's fourth survey reported whether their child (8-15 years; n = 181) was allowed to travel without an adult to school, friend's house, park and local shop. Objective physical environment measures were matched to each of these destinations. Social environment measures included neighborhood perceptions and items specific to local independent mobility. Independent mobility to local destinations ranged from 30% to 48%. Independent mobility to a local park was less likely as the distance to the closest park (small and large size) increased and less likely with additional school grounds (P < .05). Independent mobility to school was less likely as the distance to the closest large park increased and if the neighborhood was perceived as unsafe (P < .05). Independent mobility to a park or shops decreased if parenting social norms were unsupportive of children's local independent movement (P < .05). Independent mobility appears dependent upon the specific destination being visited and the impact of neighborhood features varies according to the destination examined. Findings highlight the importance of access to different types and sizes of urban green space for children's independent mobility to parks.
Multi-source irradiation facility with improved space configuration for neutron activation analysis: Design optimization.

PubMed

Kotb, N A; Solieman, Ahmed H M; El-Zakla, T; Amer, T Z; Elmeniawi, S; Comsan, M N H

2018-05-01

A neutron irradiation facility consisting of six 241 Am-Be neutron sources of 30 Ci total activity and 6.6 × 10 7 n/s total neutron yield is designed. The sources are embedded in a cubic paraffin wax, which plays a dual role as both moderator and reflector. The sample passage and irradiation channel are represented by a cylindrical path of 5 cm diameter passing through the facility core. The proposed design yields a high degree of space symmetry and thermal neutron homogeneity within 98% of flux distribution throughout the irradiated spherical sample of 5 cm diameter. The obtained thermal neutron flux is 8.0 × 10 4 n/cm 2 .s over the sample volume, with thermal-to-fast and thermal-to-epithermal ratios of 1.20 and 3.35, respectively. The design is optimized for maximizing the thermal neutron flux at sample position using the MCNP-5 code. The irradiation facility is supposed to be employed principally for neutron activation analysis. Copyright © 2018 Elsevier Ltd. All rights reserved.
Scientific Design of the New Neutron Radiography Facility (SANRAD) at SAFARI-1 for South Africa

NASA Astrophysics Data System (ADS)

de Beer, F. C.; Gruenauer, F.; Radebe, J. M.; Modise, T.; Schillinger, B.

The final scientific design for an upgraded neutron radiography/tomography facility at beam port no.2 of the SAFARI-1 nuclear research reactor has been performed through expert advice from Physics Consulting, FRMII in Germany and IPEN, Brazil. A need to upgrade the facility became apparent due to the identification of various deficiencies of the current SANRAD facility during an IAEA-sponsored expert mission of international scientists to Necsa, South Africa. A lack of adequate shielding that results in high neutron background on the beam port floor, a mismatch in the collimator aperture to the core that results in a high gradient in neutron flux on the imaging plane and due to a relative low L/D the quality of the radiographs are poor, are a number of deficiencies to name a few.The new design, based on results of Monte Carlo (MCNP-X) simulations of neutron- and gamma transport from the reactor core and through the new facility, is being outlined. The scientific design philosophy, neutron optics and imaging capabilities that include the utilization of fission neutrons, thermal neutrons, and gamma-rays emerging from the core of SAFARI-1 are discussed.
Destined to Design? How and Why Australian Women Choose to Study Industrial Design

ERIC Educational Resources Information Center

Lockhart, Cathy; Miller, Evonne

2016-01-01

Despite over three decades of legislation and initiatives designed to tackle the traditional gender divide in the science, technology and design fields, only a quarter of the registered architects in Australia are women. There are no statistics available for other design disciplines, with little known about why women choose design as a career path…
A Design for an Orbital Assembly Facility for Complex Missions

NASA Astrophysics Data System (ADS)

Feast, S.; Bond, A.

A design is presented for an Operations Base Station (OBS) in low earth orbit that will function as an integral part of a space transportation system, enabling assembly and maintenance of a Cis-Lunar transportation infrastructure and integration of vehicles for other high energy space missions to be carried out. Construction of the OBS assumes the use of the SKYLON Single-Stage-to-Orbit (SSTO) spaceplane, which imposes design and assembly constraints due to its payload mass limits and payload bay dimensions. It is assumed that the space transport infrastructure and high mission energy vehicles would also make use of SKYLON to deploy standard transport equipment and stages bound by these same constraints. The OBS is therefore a highly modular arrangement, incorporating some of these other vehicle system elements in its layout design. Architecturally, the facilities of the OBS are centred around the Assembly Dock which is in the form of a large cylindrical spaceframe structure with two large doors on either end incorporating a skin of aluminised Mylar to enclose the dock. Longitudinal rails provide internal tether attachments to anchor vehicles and components while manipulators are used for the handling and assembling of vehicle structures. The exterior of the OBS houses the habitation modules for workforce and vehicle crews along with propellant farms and other operational facilities.
Savannah River Plant engineering and design history. Volume 4: 300/700 Areas & general services and facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1957-01-01

The primary function of the 300 Area is the production and preparation of the fuel and target elements required for the 100 Area production reactors. Uranium slugs and lithium-aluminium alloy control and blanket rods are prepared in separate structures. Other facilities include a test pile, a physics assembly laboratory, an office and change house, an electrical substation, and various service facilities such as rail lines, roads, sewers, steam and water distribution lines, etc. The 700 Area contains housing and facilities for plant management, general plant services, and certain technical activities. The technical buildings include the Main Technical Laboratory, the Wastemore » Concentration Building, the Health Physics Headquarters, and the Health Physics Calibration building. Sections of this report describe the following: development of the 300-M Area; selection and description of process; design of main facilities of the 300 Area; development of the 700-A Area; design of the main facilities of the 700 Area; and general services and facilities, including transportation, plant protection, waste disposal and drainage, site work, pilot plants, storage, and furniture and fixtures.« less
Exploring Operational Safeguards, Safety, and Security by Design to Address Real Time Threats in Nuclear Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schanfein, Mark J.; Mladineo, Stephen V.

2015-07-07

Over the last few years, significant attention has been paid to both encourage application and provide domestic and international guidance for designing in safeguards and security in new facilities.1,2,3 However, once a facility is operational, safeguards, security, and safety often operate as separate entities that support facility operations. This separation is potentially a serious weakness should insider or outsider threats become a reality.Situations may arise where safeguards detects a possible loss of material in a facility. Will they notify security so they can, for example, check perimeter doors for tampering? Not doing so might give the advantage to an insidermore » who has already, or is about to, move nuclear material outside the facility building. If outsiders break into a facility, the availability of any information to coordinate the facility’s response through segregated alarm stations or a failure to include all available radiation sensors, such as safety’s criticality monitors can give the advantage to the adversary who might know to disable camera systems, but would most likely be unaware of other highly relevant sensors in a nuclear facility.This paper will briefly explore operational safeguards, safety, and security by design (3S) at a high level for domestic and State facilities, identify possible weaknesses, and propose future administrative and technical methods, to strengthen the facility system’s response to threats.« less
Variability in Criteria for Emergency Medical Services Routing of Acute Stroke Patients to Designated Stroke Center Hospitals.

PubMed

Dimitrov, Nikolay; Koenig, William; Bosson, Nichole; Song, Sarah; Saver, Jeffrey L; Mack, William J; Sanossian, Nerses

2015-09-01

Comprehensive stroke systems of care include routing to the nearest designated stroke center hospital, bypassing non-designated hospitals. Routing protocols are implemented at the state or county level and vary in qualification criteria and determination of destination hospital. We surveyed all counties in the state of California for presence and characteristics of their prehospital stroke routing protocols. Each county's local emergency medical services agency (LEMSA) was queried for the presence of a stroke routing protocol. We reviewed these protocols for method of stroke identification and criteria for patient transport to a stroke center. Thirty-three LEMSAs serve 58 counties in California with populations ranging from 1,175 to nearly 10 million. Fifteen LEMSAs (45%) had stroke routing protocols, covering 23 counties (40%) and 68% of the state population. Counties with protocols had higher population density (1,500 vs. 140 persons per square mile). In the six counties without designated stroke centers, patients meeting criteria were transported out of county. Stroke identification in the field was achieved using the Cincinnati Prehospital Stroke Screen in 72%, Los Angeles Prehospital Stroke Screen in 7% and a county-specific protocol in 22%. California EMS prehospital acute stroke routing protocols cover 68% of the state population and vary in characteristics including activation by symptom onset time and destination facility features, reflecting matching of system design to local geographic resources.
Design Criteria for Microbiological Facilities at Fort Detrick. Volume I: Introduction.

ERIC Educational Resources Information Center

Army Biological Labs., Fort Detrick, MD. Industrial Health and Safety Div.

Volume I of a two volume manual serves as an introduction to design criteria for microbiological facilities. It is addressed to management personnel responsible for planning, budgeting, and making policy decisions for construction or remodeling of microbiological research laboratories. This volume is also concerned with--(1) microbiological safety…

14 CFR 121.619 - Alternate airport for destination: IFR or over-the-top: Domestic operations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Alternate airport for destination: IFR or over-the-top: Domestic operations. 121.619 Section 121.619 Aeronautics and Space FEDERAL AVIATION... alternate airport for each destination airport in the dispatch release. When the weather conditions forecast...
14 CFR 121.619 - Alternate airport for destination: IFR or over-the-top: Domestic operations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Alternate airport for destination: IFR or over-the-top: Domestic operations. 121.619 Section 121.619 Aeronautics and Space FEDERAL AVIATION... alternate airport for each destination airport in the dispatch release. When the weather conditions forecast...
14 CFR 121.619 - Alternate airport for destination: IFR or over-the-top: Domestic operations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Alternate airport for destination: IFR or over-the-top: Domestic operations. 121.619 Section 121.619 Aeronautics and Space FEDERAL AVIATION... alternate airport for each destination airport in the dispatch release. When the weather conditions forecast...
14 CFR 121.619 - Alternate airport for destination: IFR or over-the-top: Domestic operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Alternate airport for destination: IFR or over-the-top: Domestic operations. 121.619 Section 121.619 Aeronautics and Space FEDERAL AVIATION... alternate airport for each destination airport in the dispatch release. When the weather conditions forecast...
14 CFR 121.619 - Alternate airport for destination: IFR or over-the-top: Domestic operations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Alternate airport for destination: IFR or over-the-top: Domestic operations. 121.619 Section 121.619 Aeronautics and Space FEDERAL AVIATION... alternate airport for each destination airport in the dispatch release. When the weather conditions forecast...
Mental and behavioral health environments: critical considerations for facility design.

PubMed

Shepley, Mardelle McCuskey; Watson, Angela; Pitts, Francis; Garrity, Anne; Spelman, Elizabeth; Kelkar, Janhawi; Fronsman, Andrea

2016-01-01

The purpose of the study was to identify features in the physical environment that are believed to positively impact staff and patients in psychiatric environments and use these features as the foundation for future research regarding the design of mental and behavioral health facilities. Pursuant to a broad literature review that produced an interview script, researchers conducted 19 interviews of psychiatric staff, facility administrators and architects. Interview data were analyzed using the highly structured qualitative data analysis process authored by Lincoln and Guba (1985). Seventeen topics were addressed ranging from the importance of a deinstitutionalized environment to social interaction and autonomy. The interviewees reinforced the controversy that exists around the implications of a deinstitutionalized environment, when the resulting setting diminishes patient and staff safety. Respondents tended to support open nurse stations vs. enclosed stations. Support for access to nature and the provision of an aesthetic environment was strong. Most interviewees asserted that private rooms were highly desirable because lower room density reduces the institutional character of a unit. However, a few interviewees adamantly opposed private rooms because they considered the increased supervision of one patient by another to be a deterrent to self-harm. The need to address smoking rooms in future research received the least support of all topics. Responses of interviews illustrate current opinion regarding best practice in the design of psychiatric facilities. The findings emphasize the need for more substantive research on appropriate physical environments in mental and behavioral health settings. Copyright © 2016 Elsevier Inc. All rights reserved.
Space Station Furnace Facility Core. Requirements definition and conceptual design study. Volume 2: Technical report. Appendix 6: Technical summary reports

NASA Technical Reports Server (NTRS)

1992-01-01

The Space Station Furnace Facility (SSFF) is a modular facility for materials research in the microgravity environment of the Space Station Freedom (SSF). The SSFF is designed for crystal growth and solidification research in the fields of electronic and photonic materials, metals and alloys, and glasses and ceramics and will allow for experimental determination of the role of gravitational forces in the solidification process. The facility will provide a capability for basic scientific research and will evaluate the commercial viability of low-gravity processing of selected technologically important materials. The facility is designed to support a complement of furnace modules as outlined in the Science Capabilities Requirements Document (SCRD). The SSFF is a three rack facility that provides the functions, interfaces, and equipment necessary for the processing of the furnaces and consists of two main parts: the SSFF Core Rack and the two Experiment Racks. The facility is designed to accommodate two experimenter-provided furnace modules housed within the two experiment racks, and is designed to operate these two furnace modules simultaneously. The SCRD specifies a wide range of furnace requirements and serves as the basis for the SSFF conceptual design. SSFF will support automated processing during the man-tended operations and is also designed for crew interface during the permanently manned configuration. The facility is modular in design and facilitates changes as required, so the SSFF is adept to modifications, maintenance, reconfiguration, and technology evolution.
Destination Innovation: Episode 4 CheMin

NASA Image and Video Library

2012-08-02

Destination Innovation is a new series that explores the research, science and other projects underway at the NASA Ames Research Center. Episode 4 focuses on the CheMin instrument aboard the Mars Science Laboratory, NASA' s latest robotic explorer to visit Mars. CheMin, short for 'Chemistry and Mineralogy,' was developed at NASA Ames Research Center and is one of 10 instruments aboard the rover Curiosity. The instrument is an x-ray diffractometer, which will be able to identify minerals in the Martial rock and soil.
Building on the Cornerstone: Destinations for Nearside Sample Return

NASA Technical Reports Server (NTRS)

Lawrence, S. J.; Jolliff, B. L.; Draper, D.; Stopar, J. D.; Petro, N. E.; Cohen, B. A.; Speyerer, E. J.; Gruener, J. E.

2016-01-01

Discoveries from LRO (Lunar Reconnaissance Orbiter) have transformed our knowledge of the Moon, but LRO's instruments were originally designed to collect the measurements required to enable future lunar surface exploration. Compelling science questions and critical resources make the Moon a key destination for future human and robotic exploration. Lunar surface exploration, including rovers and other landed missions, must be part of a balanced planetary science and exploration portfolio. Among the highest planetary exploration priorities is the collection of new samples and their return to Earth for more comprehensive analysis than can be done in-situ. The Moon is the closest and most accessible location to address key science questions through targeted sample return. The Moon is the only other planet from which we have contextualized samples, yet critical issues need to be addressed: we lack important details of the Moon's early and recent geologic history, the full compositional and age ranges of its crust, and its bulk composition.
Homonegativity among first and second generation migrants in Europe: the interplay of time trends, origin, destination and religion.

PubMed

Van der Bracht, Koen; Van de Putte, Bart

2014-11-01

Previous studies reported declining disapproval of homosexuality in Europe but have simultaneously identified the decelerating effect of religiosity and the higher disapproval of homosexuality among migrants. In this paper, we address disapproval of homosexuality among first- and second-generation migrants in Europe by assessing (1) period and cohort changes, (2) origin and destination country influences and (3) the role of religiosity. We develop a specific cross-classified multilevel design enabling us to simultaneously examine these influences. We test hypotheses using a subsample of the European Social Survey (ESS), containing 19,878 first and second generation migrants. The analyses lead to three important conclusions. Firstly, disapproval of homosexuality is declining both over time and across cohorts. Secondly, migrants conform to levels of disapproval of homosexuality among natives in the destination country, and this explains the decline among migrants over time. Thirdly, religion has a multi-faceted influence on levels of disapproval of homosexuality among migrants. Copyright © 2014 Elsevier Inc. All rights reserved.
10 CFR 70.64 - Requirements for new facilities or new processes at existing facilities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... behavior of items relied on for safety. (b) Facility and system design and facility layout must be based on... existing facilities. (a) Baseline design criteria. Each prospective applicant or licensee shall address the following baseline design criteria in the design of new facilities. Each existing licensee shall address the...
10 CFR 70.64 - Requirements for new facilities or new processes at existing facilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... behavior of items relied on for safety. (b) Facility and system design and facility layout must be based on... existing facilities. (a) Baseline design criteria. Each prospective applicant or licensee shall address the following baseline design criteria in the design of new facilities. Each existing licensee shall address the...
10 CFR 70.64 - Requirements for new facilities or new processes at existing facilities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... behavior of items relied on for safety. (b) Facility and system design and facility layout must be based on... existing facilities. (a) Baseline design criteria. Each prospective applicant or licensee shall address the following baseline design criteria in the design of new facilities. Each existing licensee shall address the...
10 CFR 70.64 - Requirements for new facilities or new processes at existing facilities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... behavior of items relied on for safety. (b) Facility and system design and facility layout must be based on... existing facilities. (a) Baseline design criteria. Each prospective applicant or licensee shall address the following baseline design criteria in the design of new facilities. Each existing licensee shall address the...
Relationship of initial hematocrit level to discharge destination and resource utilization after ischemic stroke: a pilot study.

PubMed

Diamond, Paul T; Gale, Shawn D; Evans, Brent A

2003-07-01

To examine the association between initial hematocrit level at the time of ischemic stroke, discharge destination, and resource utilization. Case series. University hospital. A total of 1012 consecutive patients with ischemic stroke admitted to a university health system between August 3, 1995, and June 24, 1999. Not applicable. Length of stay, hospital cost, and discharge disposition. Of 1012 patients presenting with ischemic stroke, 58% were discharged home, 10% were discharged home with home care services, 15% were discharged to a rehabilitation hospital, 11% were discharged to a skilled or intermediate care facility, and 6% died. After adjusting for age, sex, race, and comorbidities, a significant association (P=.009) existed between discharge outcome and initial hematocrit level. The probability of achieving an equivalent or less favorable outcome increased at both high and low hematocrit levels, with a minimum probability at a hematocrit level of approximately 45%. An association exists between hematocrit level at the time of ischemic stroke and discharge outcome. Midrange hematocrit levels appear to be associated with discharge to home rather than to an inpatient rehabilitation unit or to a nursing facility. Further study is indicated to examine the relationship among hematocrit level, stroke severity, and outcome.
Lessons Learned from the 200 West Pump and Treatment Facility Construction Project at the US DOE Hanford Site - A Leadership for Energy and Environmental Design (LEED) Gold-Certified Facility - 13113

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dorr, Kent A.; Freeman-Pollard, Jhivaun R.; Ostrom, Michael J.

CH2M Hill Plateau Remediation Company (CHPRC) designed, constructed, commissioned, and began operation of the largest groundwater pump and treatment facility in the U.S. Department of Energy's (DOE) nationwide complex. This one-of-a-kind groundwater pump and treatment facility, located at the Hanford Nuclear Reservation Site (Hanford Site) in Washington State, was built to an accelerated schedule with American Recovery and Reinvestment Act (ARRA) funds. There were many contractual, technical, configuration management, quality, safety, and Leadership in Energy and Environmental Design (LEED) challenges associated with the design, procurement, construction, and commissioning of this $95 million, 52,000 ft groundwater pump and treatment facility tomore » meet DOE's mission objective of treating contaminated groundwater at the Hanford Site with a new facility by June 28, 2012. The project team's successful integration of the project's core values and green energy technology throughout design, procurement, construction, and start-up of this complex, first-of-its-kind Bio Process facility resulted in successful achievement of DOE's mission objective, as well as attainment of LEED GOLD certification (Figure 1), which makes this Bio Process facility the first non-administrative building in the DOE Office of Environmental Management complex to earn such an award. (authors)« less
40 CFR 60.110b - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... an attachment to the notification required by 40 CFR 65.5(b). [52 FR 11429, Apr. 8, 1987, as amended... designation of affected facility. (a) Except as provided in paragraph (b) of this section, the affected..., reconstruction, or modification is commenced after July 23, 1984. (b) This subpart does not apply to storage...
40 CFR 60.110b - Applicability and designation of affected facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... an attachment to the notification required by 40 CFR 65.5(b). [52 FR 11429, Apr. 8, 1987, as amended... designation of affected facility. (a) Except as provided in paragraph (b) of this section, the affected..., reconstruction, or modification is commenced after July 23, 1984. (b) This subpart does not apply to storage...
40 CFR 60.110b - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... an attachment to the notification required by 40 CFR 65.5(b). [52 FR 11429, Apr. 8, 1987, as amended... designation of affected facility. (a) Except as provided in paragraph (b) of this section, the affected..., reconstruction, or modification is commenced after July 23, 1984. (b) This subpart does not apply to storage...
40 CFR 60.110b - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... an attachment to the notification required by 40 CFR 65.5(b). [52 FR 11429, Apr. 8, 1987, as amended... designation of affected facility. (a) Except as provided in paragraph (b) of this section, the affected..., reconstruction, or modification is commenced after July 23, 1984. (b) This subpart does not apply to storage...

40 CFR 60.110b - Applicability and designation of affected facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... an attachment to the notification required by 40 CFR 65.5(b). [52 FR 11429, Apr. 8, 1987, as amended... designation of affected facility. (a) Except as provided in paragraph (b) of this section, the affected..., reconstruction, or modification is commenced after July 23, 1984. (b) This subpart does not apply to storage...
Undocumented Migration and the Residential Segregation of Mexicans in New Destinations1

PubMed Central

Hall, Matthew; Stringfield, Jonathan

2014-01-01

This study uses data from the 2000 Census and 2005–2009 American Community Survey to examine the impact of undocumented Mexican migration to new destinations on residential segregation between Mexican immigrants and native-born whites and native-born blacks. We find that Mexican-white and Mexican-black segregation is higher in new Mexican gateways than in established areas and that, for Mexican-immigrant segregation from whites, this heightened level of residential segregation in new destinations can be explained by the high presence of unauthorized Mexican immigrants living there which tends to bolster segregation between the two groups. By contrast, Mexican-immigrant segregation from native-born blacks tends to be lower in areas with larger undocumented populations, a pattern that is especially true in new destinations. Neither of these opposing effects of legal status on Mexican-immigrant segregation can be explained by compositional differences in assimilation (English ability and earnings) between documented and undocumented immigrants nor by structural variation in metropolitan areas, suggesting a unique association between legal status and segregation. PMID:24913945
76 FR 80865 - Approval and Promulgation of State Plans for Designated Facilities and Pollutants; State of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... Promulgation of State Plans for Designated Facilities and Pollutants; State of Florida; Control of Hospital/ Medical/Infectious Waste Incinerator (HMIWI) Emissions From Existing Facilities AGENCY: Environmental... Guidelines (EGs) applicable to existing Hospital/Medical/Infectious Waste Incinerators (HMIWIs). These EGs...
Evaluating Intention and Effect: The Impact of Healthcare Facility Design on Patient and Staff Well-Being.

PubMed

Alvaro, Celeste; Wilkinson, Andrea J; Gallant, Sara N; Kostovski, Deyan; Gardner, Paula

2016-01-01

This post occupancy evaluation (POE) assessed the impact of architectural design on psychosocial well-being among patients and staff in the context of a new complex continuing care and rehabilitation facility. Departing from typical POEs, the hospital design intentions formed the theoretical basis to assess outcomes. Intentions included creating an environment of wellness; enhancing connection to the community, the city, and nature; enhancing opportunities for social interaction; and inspiring activity. A pretest-posttest quasi experiment, including quantitative surveys, assessed the impact of the building design on well-being outcomes across three facilities-the new hospital, the former hospital, and a comparison facility with a similar population. With the exception of connection to neighborhood (for patients) and opportunities to visit with others (for staff) and wayfinding (for patients and staff), impressions of the new hospital mirrored the design intentions relative to the former hospital and the comparison facility among patients and staff. Perceptions of improvement in mental health, self-efficacy in mobility, satisfaction, and interprofessional interactions were enhanced at the new hospital relative to the former hospital, whereas optimism, depressive symptoms, general well-being, burnout, and intention to quit did not vary. Interestingly, patients and staff with favorable impressions of the building design fared better on most well-being-related outcomes relative to those with less favorable impressions. Beyond the value of assessing the impact of the design intentions on outcomes, the approach used in this study would benefit evaluation strategies across a diversity of health and other public and large-scale buildings. © The Author(s) 2015.
What is known about the effects of medical tourism in destination and departure countries? A scoping review

PubMed Central

2010-01-01

Background Medical tourism involves patients intentionally leaving their home country to access non-emergency health care services abroad. Growth in the popularity of this practice has resulted in a significant amount of attention being given to it from researchers, policy-makers, and the media. Yet, there has been little effort to systematically synthesize what is known about the effects of this phenomenon. This article presents the findings of a scoping review examining what is known about the effects of medical tourism in destination and departure countries. Methods Drawing on academic articles, grey literature, and media sources extracted from18 databases, we follow a widely used scoping review protocol to synthesize what is known about the effects of medical tourism in destination and departure countries. The review design has three main stages: (1) identifying the question and relevant literature; (2) selecting the literature; and (3) charting, collating, and summarizing the data. Results The large majority of the 203 sources accepted into the review offer a perspective of medical tourism from the Global North, focusing on the flow of patients from high income nations to lower and middle income countries. This greatly shapes any discussion of the effects of medical tourism on destination and departure countries. Five interrelated themes that characterize existing discussion of the effects of this practice were extracted from the reviewed sources. These themes frame medical tourism as a: (1) user of public resources; (2) solution to health system problems; (3) revenue generating industry; (4) standard of care; and (5) source of inequity. It is observed that what is currently known about the effects of medical tourism is minimal, unreliable, geographically restricted and mostly based on speculation. Conclusions Given its positive and negative effects on the health care systems of departure and destination countries, medical tourism is a highly significant and
What is known about the effects of medical tourism in destination and departure countries? A scoping review.

PubMed

Johnston, Rory; Crooks, Valorie A; Snyder, Jeremy; Kingsbury, Paul

2010-11-03

Medical tourism involves patients intentionally leaving their home country to access non-emergency health care services abroad. Growth in the popularity of this practice has resulted in a significant amount of attention being given to it from researchers, policy-makers, and the media. Yet, there has been little effort to systematically synthesize what is known about the effects of this phenomenon. This article presents the findings of a scoping review examining what is known about the effects of medical tourism in destination and departure countries. Drawing on academic articles, grey literature, and media sources extracted from18 databases, we follow a widely used scoping review protocol to synthesize what is known about the effects of medical tourism in destination and departure countries. The review design has three main stages: (1) identifying the question and relevant literature; (2) selecting the literature; and (3) charting, collating, and summarizing the data. The large majority of the 203 sources accepted into the review offer a perspective of medical tourism from the Global North, focusing on the flow of patients from high income nations to lower and middle income countries. This greatly shapes any discussion of the effects of medical tourism on destination and departure countries. Five interrelated themes that characterize existing discussion of the effects of this practice were extracted from the reviewed sources. These themes frame medical tourism as a: (1) user of public resources; (2) solution to health system problems; (3) revenue generating industry; (4) standard of care; and (5) source of inequity. It is observed that what is currently known about the effects of medical tourism is minimal, unreliable, geographically restricted and mostly based on speculation. Given its positive and negative effects on the health care systems of departure and destination countries, medical tourism is a highly significant and contested phenomenon. This is especially
30 CFR 285.701 - What must I include in my Facility Design Report?

Code of Federal Regulations, 2011 CFR

2011-07-01

... design of any facilities, including cables and pipelines, that are outlined in your approved SAP, COP, or... accordance with accepted engineering practices and the approved SAP, GAP, or COP as appropriate. The...
Low-level liquid radioactive waste treatment at Murmansk, Russia: Technical design and review of facility upgrade and expansion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dyer, R.S.; Diamante, J.M.; Duffey, R.B.

1996-07-01

The governments of Norway and the US have committed their mutual cooperation and support the Murmansk Shipping Company (MSCo) to expand and upgrade the Low-Level Liquid Radioactive Waste (LLRW) treatment system located at the facilities of the Russian company RTP Atomflot, in Murmansk, Russia. RTP Atomflot provides support services to the Russian icebreaker fleet operated by the MSCo. The objective is to enable Russia to permanently cease disposing of this waste in Arctic waters. The proposed modifications will increase the facility`s capacity from 1,200 m{sup 3} per year to 5,000 m{sup 3} per year, will permit the facility to processmore » high-salt wastes from the Russian Navy`s Northern fleet, and will improve the stabilization and interim storage of the processed wastes. The three countries set up a cooperative review of the evolving design information, conducted by a joint US and Norwegian technical team from April through December, 1995. To ensure that US and Norwegian funds produce a final facility which will meet the objectives, this report documents the design as described by Atomflot and the Russian business organization, ASPECT, both in design documents and orally. During the detailed review process, many questions were generated, and many design details developed which are outlined here. The design is based on the adsorption of radionuclides on selected inorganic resins, and desalination and concentration using electromembranes. The US/Norwegian technical team reviewed the available information and recommended that the construction commence; they also recommended that a monitoring program for facility performance be instituted.« less
The International Space University's variable gravity research facility design

NASA Astrophysics Data System (ADS)

Bailey, Sheila G.; Chiaramonte, Francis P.; Davidian, Kenneth J.

1991-09-01

A manned mission to Mars will require long travel times between Earth and Mars. However, exposure to long-duration zero gravity is known to be harmful to the human body. Some of the harmful effects are loss of heart and lung capacity, inability to stand upright, muscular weakness and loss of bone calcium. A variable gravity research facility (VGRF) that would be placed in low Earth orbit (LEO) was designed by students of the International Space University 1989 Summer Session held in Strasbourg, France, to provide a testbed for conducting experiments in the life and physical sciences in preparation for a mission to Mars. This design exercise was unique because it addressed all aspects concerning a large space project. The VGRF design was described which was developed by international participants specializing in the following areas: the politics of international cooperation, engineering, architecture, in-space physiology, material and life science experimentation, data communications, business, and management.
The International Space University's variable gravity research facility design

NASA Technical Reports Server (NTRS)

Bailey, Sheila G.; Chiaramonte, Francis P.; Davidian, Kenneth J.

1991-01-01

A manned mission to Mars will require long travel times between Earth and Mars. However, exposure to long-duration zero gravity is known to be harmful to the human body. Some of the harmful effects are loss of heart and lung capacity, inability to stand upright, muscular weakness and loss of bone calcium. A variable gravity research facility (VGRF) that would be placed in low Earth orbit (LEO) was designed by students of the International Space University 1989 Summer Session held in Strasbourg, France, to provide a testbed for conducting experiments in the life and physical sciences in preparation for a mission to Mars. This design exercise was unique because it addressed all aspects concerning a large space project. The VGRF design was described which was developed by international participants specializing in the following areas: the politics of international cooperation, engineering, architecture, in-space physiology, material and life science experimentation, data communications, business, and management.
Conceptual design of initial opacity experiments on the national ignition facility

NASA Astrophysics Data System (ADS)

Heeter, R. F.; Bailey, J. E.; Craxton, R. S.; Devolder, B. G.; Dodd, E. S.; Garcia, E. M.; Huffman, E. J.; Iglesias, C. A.; King, J. A.; Kline, J. L.; Liedahl, D. A.; McKenty, P. W.; Opachich, Y. P.; Rochau, G. A.; Ross, P. W.; Schneider, M. B.; Sherrill, M. E.; Wilson, B. G.; Zhang, R.; Perry, T. S.

2017-02-01

Accurate models of X-ray absorption and re-emission in partly stripped ions are necessary to calculate the structure of stars, the performance of hohlraums for inertial confinement fusion and many other systems in high-energy-density plasma physics. Despite theoretical progress, a persistent discrepancy exists with recent experiments at the Sandia Z facility studying iron in conditions characteristic of the solar radiative-convective transition region. The increased iron opacity measured at Z could help resolve a longstanding issue with the standard solar model, but requires a radical departure for opacity theory. To replicate the Z measurements, an opacity experiment has been designed for the National Facility (NIF). The design uses established techniques scaled to NIF. A laser-heated hohlraum will produce X-ray-heated uniform iron plasmas in local thermodynamic equilibrium (LTE) at temperatures eV and electron densities 21~\\text{cm}-3$ . The iron will be probed using continuum X-rays emitted in a ps, diameter source from a 2 mm diameter polystyrene (CH) capsule implosion. In this design, of the NIF beams deliver 500 kJ to the mm diameter hohlraum, and the remaining directly drive the CH capsule with 200 kJ. Calculations indicate this capsule backlighter should outshine the iron sample, delivering a point-projection transmission opacity measurement to a time-integrated X-ray spectrometer viewing down the hohlraum axis. Preliminary experiments to develop the backlighter and hohlraum are underway, informing simulated measurements to guide the final design.
A model of destination image promotion with a case study of Nanjing, P. R. China

Treesearch

Xiang Li; Hans Vogelsong

2003-01-01

Destination image has long been a popular research topic in tourism studies. However, methods used to integrate image in real marketing practice and evaluating the market performance in a systematic way are still puzzling to practitioners. A destination image promotion model is proposed in this paper as an effort to solve the problem. The roles of some major factors...
Context-aware recommender system based on ontology for recommending tourist destinations at Bandung

NASA Astrophysics Data System (ADS)

Rizaldy Hafid Arigi, L.; Abdurahman Baizal, Z. K.; Herdiani, Anisa

2018-03-01

Recommender System is software that is able to provide personalized recommendation suits users’ needs. Recommender System has been widely implemented in various domains, including tourism. One approach that can be done for more personalized recommendations is the use of contextual information. This paper proposes a context aware recommender based ontology system in the tourism domain. The system is capable of recommending tourist destinations by using user preferences of the categories of tourism and contextual information such as user locations, weather around tourist destinations and close time of destination. Based on the evaluation, the system has accuracy of of 0.94 (item recommendation precision evaluated by expert) and 0.58 (implicitly from system-end user interaction). Based on the evaluation of user satisfaction, the system provides a satisfaction level of more than 0.7 (scale 0 to 1) for speed factors for providing liked recommendations (PE), informative description of recommendations (INF) and user trust (TR).
30 CFR 585.707 - What are the CVA's primary duties for facility design review?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What are the CVA's primary duties for facility design review? 585.707 Section 585.707 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF...; (5) Stress analyses; (6) Material designations; (7) Soil and foundation conditions; (8) Safety...
30 CFR 585.707 - What are the CVA's primary duties for facility design review?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 2 2012-07-01 2012-07-01 false What are the CVA's primary duties for facility design review? 585.707 Section 585.707 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF...; (5) Stress analyses; (6) Material designations; (7) Soil and foundation conditions; (8) Safety...
30 CFR 585.707 - What are the CVA's primary duties for facility design review?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What are the CVA's primary duties for facility design review? 585.707 Section 585.707 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF...; (5) Stress analyses; (6) Material designations; (7) Soil and foundation conditions; (8) Safety...
30 CFR 285.707 - What are the CVA's primary duties for facility design review?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What are the CVA's primary duties for facility design review? 285.707 Section 285.707 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION... data; (4) Load determinations; (5) Stress analyses; (6) Material designations; (7) Soil and foundation...
Post-Occupancy Evaluation of a Mental Healthcare Facility Based on Staff Perceptions of Design Innovations.

PubMed

Kalantari, Saleh; Snell, Robin

2017-07-01

This study was a post-occupancy evaluation (POE) to examine the effectiveness of three specific design innovations in a mental healthcare facility. In addition to collecting data about the impact of these specific designs, the study provides a model for the broader implementation of POE approaches in the mental healthcare context. POEs in general healthcare settings have been shown to lead to better work environments and better outcomes for patients. Despite growing evidence of the value provided by POE studies, the industry has been somewhat slow to adopt their regular use, in part due to unfamiliarity with the POE process. This is particularly true in mental healthcare contexts, where POE studies remain virtually nonexistent. In-depth interviews and a widely distributed, anonymous survey were used to collect hospital staff perceptions and feedback regarding the impact of specific design features. The hospital staff were quite enthusiastic about two of the design innovations studied here (a new wayfinding strategy and the use of vibrant colors in specific areas of the facility). The third innovation, open-style communication centers, elicited more mixed evaluations. The results include extensive hypothesis testing about the effects of each innovation as well as narrative discussions of their pros and cons. The study generated new knowledge about three specific mental healthcare design innovations and provides a model for the practical implementation of a POE approach in mental healthcare contexts. The results are particularly relevant for designers who are considering innovative strategies in future mental healthcare facilities.
Drive-train dynamics technology - State-of-the-art and design of a test facility for advanced development

NASA Technical Reports Server (NTRS)

Badgley, R. H.; Fleming, D. P.; Smalley, A. J.

1975-01-01

A program for the development and verification of drive-train dynamic technology is described along with its basis and the results expected from it. A central feature of this program is a drive-train test facility designed for the testing and development of advanced drive-train components, including shaft systems, dampers, and couplings. Previous efforts in designing flexible dynamic drive-train systems are reviewed, and the present state of the art is briefly summarized. The design of the test facility is discussed with major attention given to the formulation of the test-rig concept, dynamic scaling of model shafts, and the specification of design parameters. Specific efforts envisioned for the test facility are briefly noted, including evaluations of supercritical test shafts, stability thresholds for various sources and types of instabilities that can exist in shaft systems, effects of structural flexibility on the dynamic performance of dampers, and methods for vibration control in two-level and three-level flexible shaft systems.
Emerging Australian Education Markets: A Discrete Choice Model of Taiwanese and Indonesian Student Intended Study Destination.

ERIC Educational Resources Information Center

Kemp, Steven; Madden, Gary; Simpson, Michael

1998-01-01

Isolates factors influencing choice of Australia as a preferred destination for international students in emerging regional markets. Uses data obtained from a survey of students in Indonesia and Taiwan to estimate a U.S./Australia and rest-of-world/Australia discrete destination-choice model. This model identifies key factors determining country…

How to optimize tourism destination supply: A case in Shanghai from perspective of supplier and demand side perception

NASA Astrophysics Data System (ADS)

Xue, Huaju; Fang, Chengjiang

2018-02-01

It is vital to assess the regional tourist supply capability by suppliers and demand groups. The supply side’s evaluation of the regional supply capacity determines the direction of the supply investment in future, the demand side’s evaluation indicates their satisfaction degree of the destination supply and also effects their revisit the tourism destination. Therefore, the assessment of the supply and demand sides is an important reference for the reform of destination supply side, which helps us find the shortage of the destination supply factors and optimize tourism destination supply promptly. This paper through investigating tourism supply and demand groups in Shanghai, used the survey data and constructed tourism supply optimization model, analyzed the current situation of tourism supply factors in Shanghai. Results showed that the environment of Shanghai should be improved first, including improving urban air and water quality, up-grading public sanitation and increasing urban green coverage. Other supply factors improved priority were information and marketing, we should improve the information consultation of scenic spots, increase the intensity of tourism promotion and provide more free travel publicity brochures.
Diaspora engagement of African migrant health workers - examples from five destination countries.

PubMed

Wojczewski, Silvia; Poppe, Annelien; Hoffmann, Kathryn; Peersman, Wim; Nkomazana, Oathokwa; Pentz, Stephen; Kutalek, Ruth

2015-01-01

Migrant health workers fill care gaps in their destination countries, but they also actively engage in improving living conditions for people of their countries of origin through expatriate professional networks. This paper aims to explore the professional links that migrant health workers from sub-Saharan African countries living in five African and European destinations (Botswana, South Africa, Belgium, Austria, and the United Kingdom) have to their countries of origin. Qualitative interviews were conducted with migrant doctors, nurses, and midwives from sub-Saharan Africa (N=66). A qualitative content analysis of the material was performed using the software ATLAS.ti. Almost all migrant health workers have professional ties with their countries of origin supporting health, education, and social structures. They work with non-governmental organizations, universities, or hospitals and travel back and forth between their destination country and country of origin. For a few respondents, professional engagement or even maintaining private contacts in their country of origin is difficult due to the political situation at home. The results show that African migrant health workers are actively engaged in improving living conditions not only for their family members but also for the population in general in their countries of origin. Our respondents are mediators and active networkers in a globalized and transnationally connected world. The research suggests that the governments of these countries of origin could strategically use their migrant health workforce for improving education and population health in sub-Saharan Africa. Destination countries should be reminded of their need to comply with the WHO Global Code of Practice for the international recruitment of health professionals.
RF structure design of the China Material Irradiation Facility RFQ

NASA Astrophysics Data System (ADS)

Li, Chenxing; He, Yuan; Xu, Xianbo; Zhang, Zhouli; Wang, Fengfeng; Dou, Weiping; Wang, Zhijun; Wang, Tieshan

2017-10-01

The radio frequency structure design of the radio frequency quadrupole (RFQ) for the front end of China Material Irradiation Facility (CMIF), which is an accelerator based neutron irradiation facility for fusion reactor material qualification, has been completed. The RFQ is specified to accelerate 10 mA continuous deuteron beams from the energies of 20 keV/u to 1.5 MeV/u within the vane length of 5250 mm. The working frequency of the RFQ is selected to 162.5 MHz and the inter-vane voltage is set to 65 kV. Four-vane cavity type is selected and the cavity structure is designed drawing on the experience of China Initiative Accelerator Driven System (CIADS) Injector II RFQ. In order to reduce the azimuthal asymmetry of the field caused from errors in fabrication and assembly, a frequency separation between the working mode and its nearest dipole mode is reached to 17.66 MHz by utilizing 20 pairs of π-mode stabilizing loops (PISLs) distributed along the longitudinal direction with equal intervals. For the purpose of tuning, 100 slug tuners were introduced to compensate the errors caused by machining and assembly. In order to obtain a homogeneous electrical field distribution along cavity, vane cutbacks are introduced and output endplate is modified. Multi-physics study of the cavity with radio frequency power and water cooling is performed to obtain the water temperature tuning coefficients. Through comparing to the worldwide CW RFQs, it is indicated that the power density of the designed structure is moderate for operation under continuous wave (CW) mode.
46 CFR 162.050-15 - Designation of facilities.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (2) Each type of equipment the facility proposes to test. (3) A description of the facility's... concentrations and the values obtained by the facility with their equipment. The value of X d for the 12... conduct approval tests— (1) A facility must have the management organization, equipment for conducting...
Estimation and prediction of origin-destination matrices for I-66.

DOT National Transportation Integrated Search

2011-09-01

This project uses the Box-Jenkins time-series technique to model and forecast the traffic flows and then : uses the flow forecasts to predict the origin-destination matrices. First, a detailed analysis was conducted : to investigate the best data cor...
Privacy-preserving methods to retrieve origin-destination information from connect vehicles.

DOT National Transportation Integrated Search

2013-01-01

This report investigates technical approaches to address privacy concerns associated with two innovative : applications enabled by connected vehicle systems, i.e., origin-destination (OD) flow measurement and differentiated : congestion pricing. The ...
Privacy-preserving methods to retrieve origin-destination information from connected vehicles.

DOT National Transportation Integrated Search

2013-01-01

This report investigates technical approaches to address privacy concerns associated with two innovative : applications enabled by connected vehicle systems, i.e., origin-destination (OD) flow measurement and differentiated : congestion pricing. The ...
The Impact of Environmental Design on Teamwork and Communication in Healthcare Facilities: A Systematic Literature Review.

PubMed

Gharaveis, Arsalan; Hamilton, D Kirk; Pati, Debajyoti

2018-01-01

The purpose of this systematic review is to investigate the current knowledge about the impact of healthcare facility design on teamwork and communication by exploring the relevant literature. Teamwork and communication are behavioral factors that are impacted by physical design. However, the effects of environmental factors on teamwork and communication have not been investigated extensively in healthcare design literature. There are no published systematic reviews on the current topic. Searches were conducted in PubMed and Google Scholar databases in addition to targeted design journals including Health Environmental Research & Design, Environment and Behavior, Environmental Psychology, and Applied Ergonomics. Inclusion criteria were (a) full-text English language articles related to teamwork and communication and (b) involving any healthcare built environment and space design published in peer-reviewed journals between 1984 and 2017. Studies were extracted using defined inclusion and exclusion criteria. In the first phase, 26 of the 195 articles most relevant to teamwork and 19 studies of the 147 were identified and reviewed to understand the impact of communication in healthcare facilities. The literature regarding the impact of built environment on teamwork and communication were reviewed and explored in detail. Eighteen studies were selected and succinctly summarized as the final product of this review. Environmental design, which involves nurses, support staff, and physicians, is one of the critical factors that promotes the efficiency of teamwork and collaborative communication. Layout design, visibility, and accessibility levels are the most cited aspects of design which can affect the level of communication and teamwork in healthcare facilities.
Pennsylvania roundwood purchases and movements by origin and destination

Treesearch

Jamie A. Murphy; Paul M. Smith; Bruce G. Hansen

2008-01-01

A mail survey of all identified roundwood purchasers in Pennsylvania was conducted in 2004 to quantify the roundwood purchasing industry in terms of roundwood volume, origin, destination, roundwood type, and species of 2003 purchases. An adjusted response rate of 50 percent was obtained from the estimated overall population of 334 Pennsylvania roundwood purchasers....
Revisiting the destination ranking procedure in development of an Intervening Opportunities Model for public transit trip distribution

NASA Astrophysics Data System (ADS)

Nazem, Mohsen; Trépanier, Martin; Morency, Catherine

2015-01-01

An Enhanced Intervening Opportunities Model (EIOM) is developed for Public Transit (PT). This is a distribution supply dependent model, with single constraints on trip production for work trips during morning peak hours (6:00 a.m.-9:00 a.m.) within the Island of Montreal, Canada. Different data sets, including the 2008 Origin-Destination (OD) survey of the Greater Montreal Area, the 2006 Census of Canada, GTFS network data, along with the geographical data of the study area, are used. EIOM is a nonlinear model composed of socio-demographics, PT supply data and work location attributes. An enhanced destination ranking procedure is used to calculate the number of spatially cumulative opportunities, the basic variable of EIOM. For comparison, a Basic Intervening Opportunities Model (BIOM) is developed by using the basic destination ranking procedure. The main difference between EIOM and BIOM is in the destination ranking procedure: EIOM considers the maximization of a utility function composed of PT Level Of Service and number of opportunities at the destination, along with the OD trip duration, whereas BIOM is based on a destination ranking derived only from OD trip durations. Analysis confirmed that EIOM is more accurate than BIOM. This study presents a new tool for PT analysts, planners and policy makers to study the potential changes in PT trip patterns due to changes in socio-demographic characteristics, PT supply, and other factors. Also it opens new opportunities for the development of more accurate PT demand models with new emergent data such as smart card validations.
76 FR 48563 - Medicare and Medicaid Programs; Quarterly Listing of Program Issuances-January Through March 2011...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-08

...-7205 Ventricular Assist Device (Destination Therapy) Facilities. XIII Medicare-Approved Lung JoAnna...-Approved Ventricular Assist Device (Destination Therapy) Facilities, Addendum XIII: Lung Volume Reduction...-Approved Ventricular Assist Device (Destination Therapy) Facilities (January Through March 2011) Addendum...
Designing Decentralized Water and Electricity Supply System for Small Recreational Facilities in the South of Russia

NASA Astrophysics Data System (ADS)

Kasharin, D. V.

2017-11-01

The article tackles the issues of designing seasonal water and power supply systems for small recreational facilities in the south of Russia based on intelligent decision support systems. The paper proposes modular prefabricated shell water and power supply works (MPSW&PW) along with energy-efficient standalone water-treatment plants as the principal facilities compliant with the environmental and infrastructural requirements applied to specially protected areas and ensuring the least possible damage to the environment due to a maximum possible use of local construction materials characterized by impressive safety margins in highly seismic environments. The task of designing water and power supply systems requires the consideration of issues pertaining to the development of an intelligent GIS-based system for the selection of water intake sites that facilitate automation of data-processing systems using a priori scanning methods with a variable step and random directions. The paper duly addresses such issues and develops parameterized optimization algorithms for MPSW&PW shell facilities. It equally provides the substantiation of water-treatment plants intelligent design based on energy recovery reverse osmosis and nanofiltration plants that enhance the energy efficiency of such plants serving as the optimum solution for the decentralized water supply of small recreational facilities from renewable energy sources.
Evaluation of the US Army Institute of Public Health Destination Monitoring Program, a food safety surveillance program.

PubMed

Rapp-Santos, Kamala; Havas, Karyn; Vest, Kelly

2015-01-01

The Destination Monitoring Program, operated by the US Army Public Health Command (APHC), is one component that supports the APHC Veterinary Service's mission to ensure safety and quality of food procured for the Department of Defense (DoD). This program relies on retail product testing to ensure compliance of production facilities and distributors that supply food to the DoD. This program was assessed to determine the validity and timeliness by specifically evaluating whether sample size of items collected was adequate, if food samples collected were representative of risk, and whether the program returns results in a timely manner. Data was collected from the US Army Veterinary Services Lotus Notes database, including all food samples collected and submitted from APHC Region-North for the purposes of destination monitoring from January 1, 2013 to December 31, 2013. For most food items, only one sample was submitted for testing. The ability to correctly identify a contaminated food lot may be limited by reliance on test results from only one sample, as the level of confidence in a negative test result is low. The food groups most frequently sampled by APHC correlated with the commodities that were implicated in foodborne illness in the United States. Food items to be submitted were equally distributed among districts and branches, but sections within large branches submitted relatively few food samples compared to sections within smaller branches and districts. Finally, laboratory results were not available for about half the food items prior to their respective expiration dates.
Design of the opacity spectrometer for opacity measurements at the National Ignition Facility

DOE PAGES

Ross, P. W.; Heeter, R. F.; Ahmed, M. F.; ...

2016-10-03

Recent experiments at the Sandia National Laboratory Z facility have called into question models used in calculating opacity, of importance for modeling stellar interiors. An effort is being made to reproduce these results at the National Ignition Facility (NIF). These experiments require a new X-ray opacity spectrometer (OpSpec) spanning 540 eV–2100 eV with a resolving power E/ΔE > 700. The design of the OpSpec is presented. Photometric calculations based on expected opacity data are also presented in this paper. First use on NIF is expected in September 2016.
Design of the opacity spectrometer for opacity measurements at the National Ignition Facility.

PubMed

Ross, P W; Heeter, R F; Ahmed, M F; Dodd, E; Huffman, E J; Liedahl, D A; King, J A; Opachich, Y P; Schneider, M B; Perry, T S

2016-11-01

Recent experiments at the Sandia National Laboratory Z facility have called into question models used in calculating opacity, of importance for modeling stellar interiors. An effort is being made to reproduce these results at the National Ignition Facility (NIF). These experiments require a new X-ray opacity spectrometer (OpSpec) spanning 540 eV-2100 eV with a resolving power E/ΔE > 700. The design of the OpSpec is presented. Photometric calculations based on expected opacity data are also presented. First use on NIF is expected in September 2016.
Issues in designing transport layer multicast facilities

NASA Technical Reports Server (NTRS)

Dempsey, Bert J.; Weaver, Alfred C.

1990-01-01

Multicasting denotes a facility in a communications system for providing efficient delivery from a message's source to some well-defined set of locations using a single logical address. While modem network hardware supports multidestination delivery, first generation Transport Layer protocols (e.g., the DoD Transmission Control Protocol (TCP) (15) and ISO TP-4 (41)) did not anticipate the changes over the past decade in underlying network hardware, transmission speeds, and communication patterns that have enabled and driven the interest in reliable multicast. Much recent research has focused on integrating the underlying hardware multicast capability with the reliable services of Transport Layer protocols. Here, we explore the communication issues surrounding the design of such a reliable multicast mechanism. Approaches and solutions from the literature are discussed, and four experimental Transport Layer protocols that incorporate reliable multicast are examined.
Design update and recent results of the Apollon 10 PW facility

NASA Astrophysics Data System (ADS)

Le Garrec, B.; Papadopoulos, D. N.; Le Blanc, C.; Zou, J. P.; Chériaux, G.; Georges, P.; Druon, F.; Martin, L.; Fréneaux, L.; Beluze, A.; Lebas, N.; Mathieu, F.; Audebert, P.

2017-05-01

In this paper we are giving a summary of the Apollon 10 PW facility laser design together with updated laser performance. The Apollon facility is currently under construction in France. The APOLLON laser system is a laser designed for delivering pulses as short as 15 fs (10-15 s) with an energy exceeding 150 Joules on target. The peak power delivered by this laser system will be 10 Petawatts (1016W). The Apollon laser system will be delivering 4 beams: one 10 PW beam (F1 beam 400 mm diameter), one 1 PW beam (F2 beam 140 mm diameter) and two additional probe beams (F3 and F4) at a repetition rate of 1 shot per minute. The laser system is based on Ti-sapphire amplifiers pumped by frequency doubled solid-state lasers. The repetition rate of the high energy part will be 1 shot per minute. The main beam at the output of the last amplifier will be split and dispatched to two experimental areas. The main laser beam is delivering 30 J before compression at a repetition rate of 1 shot per minute and we are currently increasing to get 100J.
9 CFR 72.10 - Inspected or dipped and certified cattle subject to restrictions of State of destination.

Code of Federal Regulations, 2010 CFR

2010-01-01

... cattle subject to restrictions of State of destination. 72.10 Section 72.10 Animals and Animal Products... ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS TEXAS (SPLENETIC) FEVER IN CATTLE § 72.10 Inspected or dipped and certified cattle subject to restrictions of State of destination. All such interstate...
Design and characterization of an irradiation facility with real-time monitoring

NASA Astrophysics Data System (ADS)

Braisted, Jonathan David

Radiation causes performance degradation in electronics by inducing atomic displacements and ionizations. While radiation hardened components are available, non-radiation hardened electronics can be preferable because they are generally more compact, require less power, and less expensive than radiation tolerant equivalents. It is therefore important to characterize the performance of electronics, both hardened and non-hardened, to prevent costly system or mission failures. Radiation effects tests for electronics generally involve a handful of step irradiations, leading to poorly-resolved data. Step irradiations also introduce uncertainties in electrical measurements due to temperature annealing effects. This effect may be intensified if the time between exposure and measurement is significant. Induced activity in test samples also complicates data collection of step irradiated test samples. The University of Texas at Austin operates a 1.1 MW Mark II TRIGA research reactor. An in-core irradiation facility for radiation effects testing with a real-time monitoring capability has been designed for the UT TRIGA reactor. The facility is larger than any currently available non-central location in a TRIGA, supporting testing of larger electronic components as well as other in-core irradiation applications requiring significant volume such as isotope production or neutron transmutation doping of silicon. This dissertation describes the design and testing of the large in-core irradiation facility and the experimental campaign developed to test the real-time monitoring capability. This irradiation campaign was performed to test the real-time monitoring capability at various reactor power levels. The device chosen for characterization was the 4N25 general-purpose optocoupler. The current transfer ratio, which is an important electrical parameter for optocouplers, was calculated as a function of neutron fluence and gamma dose from the real-time voltage measurements. The
Cryogenic and thermal design for the Space Infrared Telescope Facility (SIRTF)

NASA Technical Reports Server (NTRS)

Lee, J. H.; Brooks, W. F.

1984-01-01

The 1-meter class cryogenically cooled Space Infrared Telescope Facility (SIRTF) planned by NASA, is scheduled for a 1992 launch. SIRTF would be deployed from the Shuttle, and placed into a sun synchronous polar orbit of 700 km. The facility has been defined for a mission with a minimum initial lifetime of one year in orbit with mission extension that could be made possible through in-orbit servicing of the superfluid helium cryogenic system, and use of a thermal control system. The superfluid dewar would use an orbital disconnect system for the tank supports, and vapor cooling of the barrel baffle. The transient analysis of the design shows that the superfluid helium tank with no active feedback comes within temperature requirements for the nominal orbital aperture heat load, quiescent instrument, and chopper conditions.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.