Sample records for facility description document

  1. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    J.F. Beesley

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative designmore » process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.« less

  2. Cold Vacuum Drying facility civil structural system design description (SYS 06)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    PITKOFF, C.C.

    This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.

  3. NIST Document Sharing Test Facility

    Science.gov Websites

    NIST Document Sharing Test Facility This site supports the IHE effort in Document Sharing as part . This test facility is based on the IHE IT Infrastructure Technical Framework. All testing done against that Patient IDs be pre-registered before submitting metadata about them. To allocate new patient IDs

  4. Monitored Geologic Repository Project Description Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    P. M. Curry

    2001-01-30

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing formore » the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).« less

  5. Referenced-site environmental document for a Monitored Retrievable Storage facility: backup waste management option for handling 1800 MTU per year

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Silviera, D.J.; Aaberg, R.L.; Cushing, C.E.

    This environmental document includes a discussion of the purpose of a monitored retrievable storage facility, a description of two facility design concepts (sealed storage cask and field drywell), a description of three reference sites (arid, warm-wet, and cold-wet), and a discussion and comparison of the impacts associated with each of the six site/concept combinations. This analysis is based on a 15,000-MTU storage capacity and a throughput rate of up to 1800 MTU per year.

  6. Space Station Program Description Document. Books 1-7

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The Space Station Program Description Document is summarized. The six volumes include: (1) introduction and summary; (2) mission description; (3) systems requirements and characteristics; (4) advanced development; (6) system operations; and (7) program plan. Volume 5 was deleted as a separate book.

  7. Pairwise Trajectory Management (PTM): Concept Description and Documentation

    NASA Technical Reports Server (NTRS)

    Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

    2018-01-01

    Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training

  8. Jake Garn Mission Simulator and Training Facility, Building 5, Historical Documentation

    NASA Technical Reports Server (NTRS)

    Slovinac, Trish; Deming, Joan

    2010-01-01

    astronaut training facility. This documentation package precedes any undertaking as defined by Section 106 of the NHPA, as amended, and implemented in 36 CFR Part 800, as NASA JSC has decided to proactively pursue efforts to mitigate the potential adverse affects of any future modifications to the facility. It includes a historical summary of the Space Shuttle program; the history of JSC in relation to the SSP; a narrative of the history of Building 5 and how it supported the SSP; and a physical description of the structure. In addition, photographs documenting the construction and historical use of Building 5 in support of the SSP, as well as photographs of the facility documenting the existing conditions, special technological features, and engineering details, are included. A contact sheet printed on archival paper, and an electronic copy of the work product on CD, are also provided.

  9. FAST FLUX TEST FACILITY CONCEPTUAL FACILTY DESIGN DESCRIPTION FOR THE INERT GAS CELL EXAMINATION FACILITY NO. 71

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1968-12-12

    The purpose of this Conceptual Facility Design Description (CFDD) is to provide a technical description of the Inert Gas Cell Examination Facility such that agreement with RDT on a Conceptual Design can be reached . The CFDD also serves to establish a common understanding of the facility concept among all responsible FFTF Project parties including the Architect Engineer and Reactor Designer. Included are functions and design requirements, a physical description of the facility, safety considerations, principles of operation, and maintenance principles.

  10. Kauai Test Facility hazards assessment document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Swihart, A

    1995-05-01

    The Department of Energy Order 55003A requires facility-specific hazards assessment be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Kauai Test Facility, Barking Sands, Kauai, Hawaii. The Kauai Test Facility`s chemical and radiological inventories were screened according to potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance to themore » Early Severe Health Effects threshold is 4.2 kilometers. The highest emergency classification is a General Emergency at the {open_quotes}Main Complex{close_quotes} and a Site Area Emergency at the Kokole Point Launch Site. The Emergency Planning Zone for the {open_quotes}Main Complex{close_quotes} is 5 kilometers. The Emergency Planning Zone for the Kokole Point Launch Site is the Pacific Missile Range Facility`s site boundary.« less

  11. 78 FR 16279 - HUD Healthcare Facility Documents: Notice Announcing Final Approved Documents and Assignment of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-14

    ... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5623-N-03] HUD Healthcare Facility... notice announces that the healthcare facility documents have completed the notice and comment processes... of Healthcare Programs, Office of Housing, Department of Housing and Urban Development, 451 7th...

  12. Flight Experiment Demonstration System (FEDS) functional description and interface document

    NASA Technical Reports Server (NTRS)

    Belcher, R. C.; Shank, D. E.

    1984-01-01

    This document presents a functional description of the Flight Experiment Demonstration System (FEDS) and of interfaces between FEDS and external hardware and software. FEDS is a modification of the Automated Orbit Determination System (AODS). FEDS has been developed to support a ground demonstration of microprocessor-based onboard orbit determination. This document provides an overview of the structure and logic of FEDS and details the various operational procedures to build and execute FEDS. It also documents a microprocessor interface between FEDS and a TDRSS user transponder and describes a software simulator of the interface used in the development and system testing of FEDS.

  13. Effects of increased nurses' workload on quality documentation of patient information at selected Primary Health Care facilities in Vhembe District, Limpopo Province.

    PubMed

    Shihundla, Rhulani C; Lebese, Rachel T; Maputle, Maria S

    2016-05-13

    Recording of information on multiple documents increases professional nurses' responsibilities and workload during working hours. There are multiple registers and books at Primary Health Care (PHC) facilities in which a patient's information is to be recorded for different services during a visit to a health professional. Antenatal patients coming for the first visit must be recorded in the following documents: tick register; Prevention of Mother-ToChild Transmission (PMTCT) register; consent form for HIV and AIDS testing; HIV Counselling and Testing (HCT) register (if tested positive for HIV and AIDS then this must be recorded in the Antiretroviral Therapy (ART) wellness register); ART file with an accompanying single file, completion of which is time-consuming; tuberculosis (TB) suspects register; blood specimen register; maternity case record book and Basic Antenatal Care (BANC) checklist. Nurses forget to record information in some documents which leads to the omission of important data. Omitting information might lead to mismanagement of patients. Some of the documents have incomplete and inaccurate information. As PHC facilities in Vhembe District render twenty four hour services through a call system, the same nurses are expected to resume duty at 07:00 the following morning. They are expected to work effectively and when tired a nurse may record illegible information which may cause problems when the document is retrieved by the next person for continuity of care. The objective of this study was to investigate and describe the effects of increased nurses' workload on quality documentation of patient information at PHC facilities in Vhembe District, Limpopo Province. The study was conducted in Vhembe District, Limpopo Province, where the effects of increased nurses' workload on quality documentation of information is currently experienced. The research design was explorative, descriptive and contextual in nature. The population consisted of all nurses who

  14. 78 FR 55282 - Federal Housing Administration (FHA) Healthcare Facility Documents: Notice of Information...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-10

    ... HUD has determined must be submitted with original signatures, in hard copy format. These documents... facility documents, in addition to being presented in an unmarked format, were presented in redline/strikeout format so that reviewers could see the changes proposed to the existing healthcare facility...

  15. 47 CFR 2.948 - Description of measurement facilities.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...-2001, entitled “American National Standard for Methods of Measurement of Radio-Noise Emissions from Low... 47 Telecommunication 1 2012-10-01 2012-10-01 false Description of measurement facilities. 2.948 Section 2.948 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND RADIO...

  16. 47 CFR 2.948 - Description of measurement facilities.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-2001, entitled “American National Standard for Methods of Measurement of Radio-Noise Emissions from Low... 47 Telecommunication 1 2013-10-01 2013-10-01 false Description of measurement facilities. 2.948 Section 2.948 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND RADIO...

  17. 47 CFR 2.948 - Description of measurement facilities.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-2001, entitled “American National Standard for Methods of Measurement of Radio-Noise Emissions from Low... 47 Telecommunication 1 2014-10-01 2014-10-01 false Description of measurement facilities. 2.948 Section 2.948 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND RADIO...

  18. 47 CFR 2.948 - Description of measurement facilities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-2001, entitled “American National Standard for Methods of Measurement of Radio-Noise Emissions from Low... 47 Telecommunication 1 2011-10-01 2011-10-01 false Description of measurement facilities. 2.948 Section 2.948 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND RADIO...

  19. 77 FR 26304 - Federal Housing Administration (FHA) Healthcare Facility Documents: Proposed Revisions and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-03

    ...Consistent with the Paperwork Reduction Act of 1995 (PRA), HUD is publishing for public comment a comprehensive set of closing and other documents used in connection with transactions involving healthcare facilities (excluding hospitals) that are insured pursuant to section 232 of the National Housing Act (Section 232). In addition to meeting PRA requirements, this notice seeks public comment for the purpose of enlisting input from the lending industry and other interested parties in the development, updating, and adoption of a set of instruments (collectively, healthcare facility documents) that offer the requisite protection to all parties in these FHA-insured mortgage transactions, consistent with modern real estate and mortgage lending laws and practices. The healthcare facility documents, which are the subject of this notice, can be viewed on HUD's Web site: www.hud.gov/232forms. HUD is also publishing today a proposed rule that will submit for public comment certain revisions to FHA's Section 232 regulations for the purpose of ensuring consistency between the program regulations and the revised healthcare facility documents.

  20. Content of system design descriptions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all themore » attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective.« less

  1. Comprehensive description of the Orion laser facility

    NASA Astrophysics Data System (ADS)

    Hopps, Nicholas; Oades, Kevin; Andrew, Jim; Brown, Colin; Cooper, Graham; Danson, Colin; Daykin, Simon; Duffield, Stuart; Edwards, Ray; Egan, David; Elsmere, Stephen; Gales, Steve; Girling, Mark; Gumbrell, Edward; Harvey, Ewan; Hillier, David; Hoarty, David; Horsfield, Colin; James, Steven; Leatherland, Alex; Masoero, Stephen; Meadowcroft, Anthony; Norman, Michael; Parker, Stefan; Rothman, Stephen; Rubery, Michael; Treadwell, Paul; Winter, David; Bett, Thomas

    2015-06-01

    The Orion laser facility at the atomic weapons establishment (AWE) in the UK has been operational since April 2013, fielding experiments that require both its long and short pulse capability. This paper provides a full description of the facility in terms of laser performance, target systems and diagnostics currently available. Inevitably, this is a snapshot of current capability—the available diagnostics and the laser capability are evolving continuously. The laser systems consist of ten beams, optimised around 1 ns pulse duration, which each provide a nominal 500 J at a wavelength of 351 nm. There are also two short pulse beams, which each provide 500 J in 0.5 ps at 1054 nm. There are options for frequency doubling one short pulse beam to enhance the pulse temporal contrast. More recently, further contrast enhancement, based on optical parametric amplification (OPA) in the front end with a pump pulse duration of a few ps, has been installed. An extensive suite of diagnostics are available for users, probing the optical emission, x-rays and particles produced in laser-target interactions. Optical probe diagnostics are also available. A description of the diagnostics is provided.

  2. 47 CFR 2.948 - Description of measurement facilities.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... description of the measurement facilities employed. (1) If the measured equipment is subject to the... number; (v) FCC Registration Number (FRN); (vi) A statement as to whether or not the laboratory performs... supporting structures, and all structures within 5 times the distance between the measuring antenna and the...

  3. TECHNICAL GUIDANCE DOCUMENT: QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES

    EPA Science Inventory

    This Technical Guidance Document provides comprehensive guidance on procedures for quality assurance and quality control for waste containment facilities. he document includes a discussion of principles and concepts, compacted soil liners, soil drainage systems, geosynthetic drai...

  4. TECHNICAL GUIDANCE DOCUMENT: QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES

    EPA Science Inventory

    This Technical Guidance Document provides comprehensive guidance on procedures for quality assurance and quality control for waste containment facilities. The document includes a discussion of principles and concepts, compacted soil liners, soil drainage systems, geosynthetic dr...

  5. YALINA facility a sub-critical Accelerator- Driven System (ADS) for nuclear energy research facility description and an overview of the research program (1997-2008).

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gohar, Y.; Smith, D. L.; Nuclear Engineering Division

    2010-04-28

    The YALINA facility is a zero-power, sub-critical assembly driven by a conventional neutron generator. It was conceived, constructed, and put into operation at the Radiation Physics and Chemistry Problems Institute of the National Academy of Sciences of Belarus located in Minsk-Sosny, Belarus. This facility was conceived for the purpose of investigating the static and dynamic neutronics properties of accelerator driven sub-critical systems, and to serve as a neutron source for investigating the properties of nuclear reactions, in particular transmutation reactions involving minor-actinide nuclei. This report provides a detailed description of this facility and documents the progress of research carried outmore » there during a period of approximately a decade since the facility was conceived and built until the end of 2008. During its history of development and operation to date (1997-2008), the YALINA facility has hosted several foreign groups that worked with the resident staff as collaborators. The participation of Argonne National Laboratory in the YALINA research programs commenced in 2005. For obvious reasons, special emphasis is placed in this report on the work at YALINA facility that has involved Argonne's participation. Attention is given here to the experimental program at YALINA facility as well as to analytical investigations aimed at validating codes and computational procedures and at providing a better understanding of the physics and operational behavior of the YALINA facility in particular, and ADS systems in general, during the period 1997-2008.« less

  6. Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

    NASA Technical Reports Server (NTRS)

    Callender, E. David; Steinbacher, Jody

    1989-01-01

    This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

  7. UTM TCL 2.0 Software Version Description (SVD) Document

    NASA Technical Reports Server (NTRS)

    Mcguirk, Patrick

    2017-01-01

    This is the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level(TCL) 2.0 Software Version Description (SVD) document. This UTM TCL 2.0 SVD describes the following four topics: 1. Software Release Contents: A listing of the files comprising this release 2. Installation Instructions: How to install the release and get it running 3. Changes Since Previous Release: General updates since the previous UTM release 4. Known Issues: Known issues and limitations in this release

  8. Safeguards Guidance Document for Designers of Commercial Nuclear Facilities: International Nuclear Safeguards Requirements and Practices For Uranium Enrichment Plants

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Robert Bean; Casey Durst

    2009-10-01

    This report is the second in a series of guidelines on international safeguards requirements and practices, prepared expressly for the designers of nuclear facilities. The first document in this series is the description of generic international nuclear safeguards requirements pertaining to all types of facilities. These requirements should be understood and considered at the earliest stages of facility design as part of a new process called “Safeguards-by-Design.” This will help eliminate the costly retrofit of facilities that has occurred in the past to accommodate nuclear safeguards verification activities. The following summarizes the requirements for international nuclear safeguards implementation at enrichmentmore » plants, prepared under the Safeguards by Design project, and funded by the U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA), Office of NA-243. The purpose of this is to provide designers of nuclear facilities around the world with a simplified set of design requirements and the most common practices for meeting them. The foundation for these requirements is the international safeguards agreement between the country and the International Atomic Energy Agency (IAEA), pursuant to the Treaty on the Non-proliferation of Nuclear Weapons (NPT). Relevant safeguards requirements are also cited from the Safeguards Criteria for inspecting enrichment plants, found in the IAEA Safeguards Manual, Part SMC-8. IAEA definitions and terms are based on the IAEA Safeguards Glossary, published in 2002. The most current specification for safeguards measurement accuracy is found in the IAEA document STR-327, “International Target Values 2000 for Measurement Uncertainties in Safeguarding Nuclear Materials,” published in 2001. For this guide to be easier for the designer to use, the requirements have been restated in plainer language per expert interpretation using the source documents noted. The safeguards agreement is

  9. Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 4: Solar electric propulsion vehicle

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This document presents the solar electric propulsion (SEP) concept design developed as part of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the SEP concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.

  10. Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 3: Nuclear thermal rocket vehicle

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This document presents the nuclear thermal rocket (NTR) concept design developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the NTR concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities and costs.

  11. 75 FR 45678 - Notice of Availability of Interim Staff Guidance Document for Fuel Cycle Facilities

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-03

    ... Document for Fuel Cycle Facilities AGENCY: Nuclear Regulatory Commission. ACTION: Notice of availability..., Division of Fuel Cycle Safety and Safeguards, Office of Nuclear Material Safety and Safeguards, U.S... Commission (NRC) prepares and issues Interim Staff Guidance (ISG) documents for fuel cycle facilities. These...

  12. Software Manages Documentation in a Large Test Facility

    NASA Technical Reports Server (NTRS)

    Gurneck, Joseph M.

    2001-01-01

    The 3MCS computer program assists and instrumentation engineer in performing the 3 essential functions of design, documentation, and configuration management of measurement and control systems in a large test facility. Services provided by 3MCS are acceptance of input from multiple engineers and technicians working at multiple locations;standardization of drawings;automated cross-referencing; identification of errors;listing of components and resources; downloading of test settings; and provision of information to customers.

  13. Oak Ridge TNS Program: system description manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Reid, R.L.; Becraft, W.R.; Brown, T.G.

    1979-05-01

    This document provides a systems description of the Reference Design for The Next Step (TNS) evolved at Oak Ridge National Laboratory (ORNL) during FY 1978. The description is presented on the basis of 24 individual device and facility systems. Additional information on these systems, the Reference Design, and the FY 1978 Oak Ridge TNS activities can be found in the associated technical memoranda, ORNL/TM-6720 and ORNL/TM-6722--ORNL/TM-6733.

  14. Reference Mission Operational Analysis Document (RMOAD) for the Life Sciences Research Facilities

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The space station will be constructed during the next decade as an orbiting, low-gravity, permanent facility. The facility will provide a multitude of research opportunities for many different users. The pressurized research laboratory will allow life scientists to study the effects of long-term exposure to microgravity on humans, animals, and plants. The results of these studies will increase our understanding of this foreign environment on basic life processes and ensure the safety of man's long-term presence in space. This document establishes initial operational requirements for the use of the Life Sciences Research Facility (LSRF) during its construction.

  15. Waste receiving and processing plant control system; system design description

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    LANE, M.P.

    1999-02-24

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed asmore » separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.« less

  16. Living Away from Home Facilities for Isolated Children. Document 78. A Look at Recent Documents of Educational Significance.

    ERIC Educational Resources Information Center

    Queensland Dept. of Education, Brisbane (Australia).

    The first national study of facilities for isolated Australian children living away from home was undertaken by the Commonwealth Schools Commission in 1981 and released in 1983. This document contains the conclusions, findings, and recommendations of the Commonwealth Schools Commission Working Party report. The results prompted the Commission to…

  17. Documenting and determining distributions, trends, and relations in truck times at international border crossing facilities.

    DOT National Transportation Integrated Search

    2017-01-20

    Documenting the times trucks incur when crossing an international border facility is valuable both to the private freight industry and to gateway facility operators and planners. : Members of the project team previously developed and implemented an a...

  18. The Role of Documentation Quality in Anesthesia-Related Closed Claims: A Descriptive Qualitative Study.

    PubMed

    Wilbanks, Bryan A; Geisz-Everson, Marjorie; Boust, Rebecca R

    2016-09-01

    Clinical documentation is a critical tool in supporting care provided to patients. Sound documentation provides a picture of clinical events that can be used to improve patient care. However, many other uses for clinical documentation are equally important. Such documentation informs clinical decision support tools, creates a legal record of patient care, assists in financial reimbursement of services, and serves as a repository for secondary data analysis. Conversely, poor documentation can impair patient safety and increase malpractice risk exposure by reflecting poor or inaccurate information that ultimately may guide patient care decisions.Through an examination of anesthesia-related closed claims, a descriptive qualitative study emerged, which explored the antecedents and consequences of documentation quality in the claims reviewed. A secondary data analysis utilized a database generated by the American Association of Nurse Anesthetists Foundation closed claim review team. Four major themes emerged from the analysis. Themes 1, 2, and 4 primarily describe how poor documentation quality can have negative consequences for clinicians. The third theme primarily describes how poor documentation quality that can negatively affect patient safety.

  19. Space Station Furnace Facility. Experiment/Facility Requirements Document (E/FRD), volume 2, appendix 5

    NASA Technical Reports Server (NTRS)

    Kephart, Nancy

    1992-01-01

    The function of the Space Station Furnace Facility (SSFF) is to support materials research into the crystal growth and solidification processes of electronic and photonic materials, metals and alloys, and glasses and ceramics. To support this broad base of research requirements, the SSFF will employ a variety of furnace modules operated, regulated, and supported by a core of common subsystems. Furnace modules may be reconfigured or specifically developed to provide unique solidifcation conditions for each set of experiments. The SSFF modular approach permits the addition of new or scaled-up furnace modules to support the evolution of the facility as new science requirements are identified. The SSFF Core is of modular design to permit augmentation for enhanced capabilities. The fully integrated configuration of the SSFF will consist of three racks with the capability of supporting up to two furnace modules per rack. The initial configuration of the SSFF will consist of two of the three racks and one furnace module. This Experiment/Facility Requirements Document (E/FRD) describes the integrated facility requirements for the Space Station Freedom (SSF) Integrated Configuration-1 (IC1) mission. The IC1 SSFF will consist of two racks: the Core Rack, with the centralized subsystem equipment, and the Experiment Rack-1, with Furnace Module-1 and the distributed subsystem equipment to support the furnace.

  20. Consolidated Development Objectives Document (CDOD) For MB-60

    NASA Technical Reports Server (NTRS)

    Greene, William D.

    2013-01-01

    This document defines the objectives related to liquid rocket engine system development to be undertaken by JAXA in support of the Space Launch System (SLS) Program managed out of the NASA Marshall Space Flight Center (MSFC). These objectives include furnishing the necessary management, labor, facilities, tools, equipment, and materials required to execute the specified activities. 1.1 Project Scope: The scope of this effort is to develop a rocket engine and associated products per the objectives and technical requirements established in this document. This engine, minus the engine controller, designated here as MB ]60, is to be developed through to a prequalification point of maturity. It is assumed that should JCNE ]1 development proceed beyond this maturity point towards actual flight qualification, the engine controller will be supplied and integrated by NASA. 1.2 Document Structure: The structure of this Consolidated Development Objectives Document (CDOD) includes a traditional description of objectives in a SOO, plus the associated Data Products Document (DPD) in an attached appendix, and then Engine Requirements Document (ERD) as another attached appendix. It is the intent that this document, in conjunction with the cited applicable documents, should constitute a complete programmatic and technical description of the development effort to be pursued.

  1. 30 CFR 585.632 - What documents must I submit before I may construct and install facilities under my approved COP?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... construct and install facilities under my approved COP? 585.632 Section 585.632 Mineral Resources BUREAU OF... Approved Cop § 585.632 What documents must I submit before I may construct and install facilities under my approved COP? (a) You must submit to BOEM the documents listed in the following table: Document...

  2. 30 CFR 585.632 - What documents must I submit before I may construct and install facilities under my approved COP?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... construct and install facilities under my approved COP? 585.632 Section 585.632 Mineral Resources BUREAU OF... Approved Cop § 585.632 What documents must I submit before I may construct and install facilities under my approved COP? (a) You must submit to BOEM the documents listed in the following table: Document...

  3. 30 CFR 585.632 - What documents must I submit before I may construct and install facilities under my approved COP?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... construct and install facilities under my approved COP? 585.632 Section 585.632 Mineral Resources BUREAU OF... Approved Cop § 585.632 What documents must I submit before I may construct and install facilities under my approved COP? (a) You must submit to BOEM the documents listed in the following table: Document...

  4. Ultraviolet Free Electron Laser Facility preliminary design report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ben-Zvi, I.

    1993-02-01

    This document, the Preliminary Design Report (PDR) for the Brookhaven Ultraviolet Free Electron Laser (UV FEL) facility, describes all the elements of a facility proposed to meet the needs of a research community which requires ultraviolet sources not currently available as laboratory based lasers. Further, for these experiments, the requisite properties are not extant in either the existing second or upcoming third generation synchrotron light sources. This document is the result of our effort at BNL to identify potential users, determine the requirements of their experiments, and to design a facility which can not only satisfy the existing need, butmore » have adequate flexibility for possible future extensions as need dictates and as evolving technology allows. The PDR is comprised of three volumes. In this, the first volume, background for the development of the proposal is given, including descriptions of the UV FEL facility, and representative examples of the science it was designed to perform. Discussion of the limitations and potential directions for growth are also included. A detailed description of the facility design is then provided, which addresses the accelerator, optical, and experimental systems. Information regarding the conventional construction for the facility is contained in an addendum to volume one (IA).« less

  5. Biological Information Document, Radioactive Liquid Waste Treatment Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Biggs, J.

    1995-12-31

    This document is intended to act as a baseline source material for risk assessments which can be used in Environmental Assessments and Environmental Impact Statements. The current Radioactive Liquid Waste Treatment Facility (RLWTF) does not meet current General Design Criteria for Non-reactor Nuclear Facilities and could be shut down affecting several DOE programs. This Biological Information Document summarizes various biological studies that have been conducted in the vicinity of new Proposed RLWTF site and an Alternative site. The Proposed site is located on Mesita del Buey, a mess top, and the Alternative site is located in Mortandad Canyon. The Proposedmore » Site is devoid of overstory species due to previous disturbance and is dominated by a mixture of grasses, forbs, and scattered low-growing shrubs. Vegetation immediately adjacent to the site is a pinyon-juniper woodland. The Mortandad canyon bottom overstory is dominated by ponderosa pine, willow, and rush. The south-facing slope was dominated by ponderosa pine, mountain mahogany, oak, and muhly. The north-facing slope is dominated by Douglas fir, ponderosa pine, and oak. Studies on wildlife species are limited in the vicinity of the proposed project and further studies will be necessary to accurately identify wildlife populations and to what extent they utilize the project area. Some information is provided on invertebrates, amphibians and reptiles, and small mammals. Additional species information from other nearby locations is discussed in detail. Habitat requirements exist in the project area for one federally threatened wildlife species, the peregrine falcon, and one federal candidate species, the spotted bat. However, based on surveys outside of the project area but in similar habitats, these species are not expected to occur in either the Proposed or Alternative RLWTF sites. Habitat Evaluation Procedures were used to evaluate ecological functioning in the project area.« less

  6. 36 CFR 1232.16 - What documentation must an agency create before it transfers records to a records storage facility?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What documentation must an agency create before it transfers records to a records storage facility? 1232.16 Section 1232.16 Parks... RECORDS TO RECORDS STORAGE FACILITIES § 1232.16 What documentation must an agency create before it...

  7. Experiment/facility requirements document for the Space Station Furnace Facility. Section 1: Integrated configuration

    NASA Astrophysics Data System (ADS)

    1992-05-01

    The function of the Space Station Furnace Facility (SSFF) is to support materials research into the crystal growth and solidification processes of electronic and photonic materials, metals and alloys, and glasses and ceramics. To support this broad base of research requirements, the SSFF will employ a variety of furnace modules which will be operated, regulated, and supported by a core of common subsystems. Furnace modules may be reconfigured or specifically developed to provide unique solidification conditions for each set of experiments. The SSFF modular approach permits the addition of new or scaled-up furnace modules to support the evolution of the facility as new science requirements are identified. The SSFF Core is of modular design to permit augmentation for enhanced capabilities. The fully integrated configuration of the SSFF will consist of three racks with the capability of supporting up to two furnace modules per rack. The initial configuration of the SSFF will consist of two of the three racks and one furnace module. This Experiment/Facility Requirements Document (E/FRD) describes the integrated facility requirements for the Space Station Freedom (SSF) Integrated Configuration-1 (IC1) mission. The IC1 SSFF will consist of two racks: the Core Rack, with the centralized subsystem equipment; and the Experiment Rack-1, with Furnace Module-1 and the distributed subsystem equipment to support the furnace. The SSFF support functions are provided by the following Core subsystems: power conditioning and distribution subsystem (SSFF PCDS); data management subsystem (SSFF DMS); thermal control Subsystem (SSFF TCS); gas distribution subsystem (SSFF GDS); and mechanical structures subsystem (SSFF MSS).

  8. Experiment/facility requirements document for the Space Station Furnace Facility. Section 1: Integrated configuration

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The function of the Space Station Furnace Facility (SSFF) is to support materials research into the crystal growth and solidification processes of electronic and photonic materials, metals and alloys, and glasses and ceramics. To support this broad base of research requirements, the SSFF will employ a variety of furnace modules which will be operated, regulated, and supported by a core of common subsystems. Furnace modules may be reconfigured or specifically developed to provide unique solidification conditions for each set of experiments. The SSFF modular approach permits the addition of new or scaled-up furnace modules to support the evolution of the facility as new science requirements are identified. The SSFF Core is of modular design to permit augmentation for enhanced capabilities. The fully integrated configuration of the SSFF will consist of three racks with the capability of supporting up to two furnace modules per rack. The initial configuration of the SSFF will consist of two of the three racks and one furnace module. This Experiment/Facility Requirements Document (E/FRD) describes the integrated facility requirements for the Space Station Freedom (SSF) Integrated Configuration-1 (IC1) mission. The IC1 SSFF will consist of two racks: the Core Rack, with the centralized subsystem equipment; and the Experiment Rack-1, with Furnace Module-1 and the distributed subsystem equipment to support the furnace. The SSFF support functions are provided by the following Core subsystems: power conditioning and distribution subsystem (SSFF PCDS); data management subsystem (SSFF DMS); thermal control Subsystem (SSFF TCS); gas distribution subsystem (SSFF GDS); and mechanical structures subsystem (SSFF MSS).

  9. Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant. Design Requirements Document (DRD)

    NASA Technical Reports Server (NTRS)

    Rigo, H. S.; Bercaw, R. W.; Burkhart, J. A.; Mroz, T. S.; Bents, D. J.; Hatch, A. M.

    1981-01-01

    A description and the design requirements for the 200 MWe (nominal) net output MHD Engineering Test Facility (ETF) Conceptual Design, are presented. Performance requirements for the plant are identified and process conditions are indicated at interface stations between the major systems comprising the plant. Also included are the description, functions, interfaces and requirements for each of these major systems. The lastest information (1980-1981) from the MHD technology program are integrated with elements of a conventional steam electric power generating plant.

  10. Water immersion facility general description, spacecraft design division, crew station branch

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The Water Immersion Facility provides an accurate, safe, neutral buoyancy simulation of zero gravity conditions for development of equipment and procedures, and the training of crews. A detailed description is given of some of the following systems: (1) water tank and support equipment; (2) communications systems; (3) environmental control and liquid cooled garment system (EcS/LCG); (4) closed circuit television system; and (5) medical support system.

  11. Pressure ulcer prevention in long-term-care facilities: a pilot study implementing standardized nurse aide documentation and feedback reports.

    PubMed

    Horn, Susan D; Sharkey, Siobhan S; Hudak, Sandra; Gassaway, Julie; James, Roberta; Spector, William

    2010-03-01

    To design and facilitate implementation of practice-based evidence changes associated with decreases in pressure ulcer (PrU) development in long-term-care (LTC) facilities and promote these practices as part of routine care. Pre/post observational study. Frail older adult residents in 11 US LTC facilities. Project facilitators assisted frontline multidisciplinary teams (certified nurse aides [CNAs], nurses, and dietitians/dietary aides) to develop streamlined standardized CNA documentation and weekly reports to identify high-risk residents and to integrate clinical reports into day-to-day practice and clinical decision making. The program was called "Real-Time Optimal Care Plans for Nursing Home QI" (Real-Time). Prevalence of PrUs using Centers for Medicare & Medicaid Services (CMS) quality measures (QMs), number of in-house-acquired PrUs, and number and completeness of CNA documentation forms. Seven study LTC facilities that reported data to CMS experienced a combined 33% (SD, 36.1%) reduction in the CMS high-risk PrU QM in 18 months and reduction in newly occurring PrUs (number of ulcers in the fourth quarter of 2003: range, 2-19; and in the third quarter of 2005: range, 1-6). Five of these LTC facilities that fully implemented Real-Time experienced a combined 48.1% (SD, 23.4%) reduction in the CMS high-risk PrU QM. Ten facilities reduced by an average of 2 to 5 their number of CNA documentation forms; CNA weekly documentation completeness reached a consistent level of 90% to 95%, and 8 facilities integrated the use of 2 to 4 weekly project reports in routine clinical decision making. Quality improvement efforts that provide access to focused and timely clinical information, facilitate change, and promote staff working together in multidisciplinary teams impacted clinical outcomes. Prevention of PrUs showed a trend of improvement in facilities that fully integrated tools to identify high-risk residents into day-to-day practice. CNA documentation facilitated

  12. Implementing personal digital assistant documentation of pharmacist interventions in a military treatment facility.

    PubMed

    Ford, Stephen; Illich, Stan; Smith, Lisa; Franklin, Arthur

    2006-01-01

    To describe the use of personal digital assistants (PDAs) in documenting pharmacists' clinical interventions. Evans Army Community Hospital (EACH), a 78-bed military treatment facility, in Colorado Springs. Pharmacists on staff at EACH. All pharmacists at EACH used PDAs with the pilot software to record interventions for 1 month. The program underwent final design changes and then became the sole source for recording pharmacist interventions. The results of this project are being evaluated every 3 months for the first year and yearly thereafter. Visual CE (Syware Inc. Cambridge, Mass.) software was selected to develop fields for the documentation tool. This software is simple and easy to use, and users can retrieve reports of interventions from both inpatient and outpatient sections. The software needed to be designed so that data entry would only take a few minutes and ad hoc reports could be produced easily. Number of pharmacist interventions reported, time spent in clinical interventions, and outcome of clinical intervention. Implementing a PDA-based system for documenting pharmacist interventions across ambulatory, inpatient, and clinical services dramatically increased reporting during the first 6 months after implementation (August 2004-February 2005). After initial fielding, clinical pharmacists in advanced practice settings (such as disease management clinic, anticoagulation clinic) recognized a need to tailor the program to their specific activities, which resulted in a spin-off program unique to their practice roles. A PDA-based system for documenting clinical interventions at a military treatment facility increased reporting of interventions across all pharmacy points of service. Pharmacy leadership used these data to document the impact of pharmacist interventions on safety and quality of pharmaceutical care provided.

  13. SIRU utilization. Volume 2: Software description and program documentation

    NASA Technical Reports Server (NTRS)

    Oehrle, J.; Whittredge, R.

    1973-01-01

    A complete description of the additional analysis, development and evaluation provided for the SIRU system as identified in the requirements for the SIRU utilization program is presented. The SIRU configuration is a modular inertial subsystem with hardware and software features that achieve fault tolerant operational capabilities. The SIRU redundant hardware design is formulated about a six gyro and six accelerometer instrument module package. The modules are mounted in this package so that their measurement input axes form a unique symmetrical pattern that corresponds to the array of perpendiculars to the faces of a regular dodecahedron. This six axes array provides redundant independent sensing and the symmetry enables the formulation of an optimal software redundant data processing structure with self-contained fault detection and isolation (FDI) capabilities. Documentation of the additional software and software modifications required to implement the utilization capabilities includes assembly listings and flow charts

  14. 30 CFR 285.632 - What documents must I submit before I may construct and install facilities under my approved COP?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... construct and install facilities under my approved COP? 285.632 Section 285.632 Mineral Resources BUREAU OF... Requirements Activities Under An Approved Cop § 285.632 What documents must I submit before I may construct and install facilities under my approved COP? (a) You must submit to MMS the documents listed in the following...

  15. Ground Software Maintenance Facility (GSMF) user's manual

    NASA Technical Reports Server (NTRS)

    Aquila, V.; Derrig, D.; Griffith, G.

    1986-01-01

    Instructions for the Ground Software Maintenance Facility (GSMF) system user is provided to operate the GSMF in all modes. The GSMF provides the resources for the Automatic Test Equipment (ATE) computer program maintenance (GCOS and GOAL). Applicable reference documents are listed. An operational overview and descriptions of the modes in terms of operator interface, options, equipment, material utilization, and operational procedures are contained. Test restart procedures are described. The GSMF documentation tree is presented including the user manual.

  16. Feasibility study for a numerical aerodynamic simulation facility. Volume 2: Hardware specifications/descriptions

    NASA Technical Reports Server (NTRS)

    Green, F. M.; Resnick, D. R.

    1979-01-01

    An FMP (Flow Model Processor) was designed for use in the Numerical Aerodynamic Simulation Facility (NASF). The NASF was developed to simulate fluid flow over three-dimensional bodies in wind tunnel environments and in free space. The facility is applicable to studying aerodynamic and aircraft body designs. The following general topics are discussed in this volume: (1) FMP functional computer specifications; (2) FMP instruction specification; (3) standard product system components; (4) loosely coupled network (LCN) specifications/description; and (5) three appendices: performance of trunk allocation contention elimination (trace) method, LCN channel protocol and proposed LCN unified second level protocol.

  17. Operating manual for the High Flux Isotope Reactor. Volume I. Description of the facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1982-09-01

    This volume contains a comprehensive description of the High Flux Isotope Reactor Facility. Its primary purpose is to supplement the detailed operating procedures, providing the reactor operators with background information on the various HFIR systems. The detailed operating procdures are presented in another report.

  18. Avionics Systems Laboratory/Building 16. Historical Documentation

    NASA Technical Reports Server (NTRS)

    Slovinac, Patricia; Deming, Joan

    2011-01-01

    As part of this nation-wide study, in September 2006, historical survey and evaluation of NASA-owned and managed facilities that was conducted by NASA s Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The results of this study are presented in a report entitled, "Survey and Evaluation of NASA-owned Historic Facilities and Properties in the Context of the U.S. Space Shuttle Program, Lyndon B. Johnson Space Center, Houston, Texas," prepared in November 2007 by NASA JSC s contractor, Archaeological Consultants, Inc. As a result of this survey, the Avionics Systems Laboratory (Building 16) was determined eligible for listing in the NRHP, with concurrence by the Texas State Historic Preservation Officer (SHPO). The survey concluded that Building 5 is eligible for the NRHP under Criteria A and C in the context of the U.S. Space Shuttle program (1969-2010). Because it has achieved significance within the past 50 years, Criteria Consideration G applies. At the time of this documentation, Building 16 was still used to support the SSP as an engineering research facility, which is also sometimes used for astronaut training. This documentation package precedes any undertaking as defined by Section 106 of the NHPA, as amended, and implemented in 36 CFR Part 800, as NASA JSC has decided to proactively pursue efforts to mitigate the potential adverse affects of any future modifications to the facility. It includes a historical summary of the Space Shuttle program; the history of JSC in relation to the SSP; a narrative of the history of Building 16 and how it supported the SSP; and a physical description of the structure. In addition, photographs documenting the construction and historical use of Building 16 in support of the SSP, as well as photographs of the facility documenting the existing conditions, special technological features, and engineering details, are included. A contact sheet printed on archival paper, and an electronic copy of the work product on CD, are

  19. 36 CFR 1232.16 - What documentation must an agency create before it transfers records to a records storage facility?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... agency create before it transfers records to a records storage facility? 1232.16 Section 1232.16 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT TRANSFER OF RECORDS TO RECORDS STORAGE FACILITIES § 1232.16 What documentation must an agency create before it...

  20. 36 CFR 1232.16 - What documentation must an agency create before it transfers records to a records storage facility?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... agency create before it transfers records to a records storage facility? 1232.16 Section 1232.16 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT TRANSFER OF RECORDS TO RECORDS STORAGE FACILITIES § 1232.16 What documentation must an agency create before it...

  1. 36 CFR 1232.16 - What documentation must an agency create before it transfers records to a records storage facility?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... agency create before it transfers records to a records storage facility? 1232.16 Section 1232.16 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT TRANSFER OF RECORDS TO RECORDS STORAGE FACILITIES § 1232.16 What documentation must an agency create before it...

  2. Discharge documentation of patients discharged to subacute facilities: a three-year quality improvement process across an integrated health care system.

    PubMed

    Gandara, Esteban; Ungar, Jonathan; Lee, Jason; Chan-Macrae, Myrna; O'Malley, Terrence; Schnipper, Jeffrey L

    2010-06-01

    Effective communication among physicians during hospital discharge is critical to patient care. Partners Healthcare (Boston) has been engaged in a multi-year process to measure and improve the quality of documentation of all patients discharged from its five acute care hospitals to subacute facilities. Partners first engaged stakeholders to develop a consensus set of 12 required data elements for all discharges to subacute facilities. A measurement process was established and later refined. Quality improvement interventions were then initiated to address measured deficiencies and included education of physicians and nurses, improvements in information technology, creation of or improvements in discharge documentation templates, training of hospitalists to serve as role models, feedback to physicians and their service chiefs regarding reviewed cases, and case manager review of documentation before discharge. To measure improvement in quality as a result of these efforts, rates of simultaneous inclusion of all 12 applicable data elements ("defect-free rate") were analyzed over time. Some 3,101 discharge documentation packets of patients discharged to subacute facilities from January 1, 2006, through September 2008 were retrospectively studied. During the 11 monitored quarters, the defect-free rate increased from 65% to 96% (p < .001 for trend). The largest improvements were seen in documentation of preadmission medication lists, allergies, follow-up, and warfarin information. Institution of rigorous measurement, feedback, and multidisciplinary, multimodal quality improvement processes improved the inclusion of data elements in discharge documentation required for safe hospital discharge across a large integrated health care system.

  3. The Langley thermal protection system test facility: A description including design operating boundaries

    NASA Technical Reports Server (NTRS)

    Klich, G. F.

    1976-01-01

    A description of the Langley thermal protection system test facility is presented. This facility was designed to provide realistic environments and times for testing thermal protection systems proposed for use on high speed vehicles such as the space shuttle. Products from the combustion of methane-air-oxygen mixtures, having a maximum total enthalpy of 10.3 MJ/kg, are used as a test medium. Test panels with maximum dimensions of 61 cm x 91.4 cm are mounted in the side wall of the test region. Static pressures in the test region can range from .005 to .1 atm and calculated equilibrium temperatures of test panels range from 700 K to 1700 K. Test times can be as long as 1800 sec. Some experimental data obtained while using combustion products of methane-air mixtures are compared with theory, and calibration of the facility is being continued to verify calculated values of parameters which are within the design operating boundaries.

  4. Mission Control Center/Building 30. Historical Documentation

    NASA Technical Reports Server (NTRS)

    2010-01-01

    As part of this nation-wide study, in September 2006, historical survey and evaluation of NASA-owned and managed facilities was conducted by NASA's Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The results of this study are presented in a report entitled, Survey and Evaluation of NASA-owned Historic Facilities and Properties in the Context of the U.S. Space Shuttle Program, Lyndon B. Johnson Space Center, Houston, Texas, prepared in November 2007 by NASA JSC s contractor, Archaeological Consultants, Inc. As a result of this survey, the Mission Control Center (Building 30) was determined eligible for listing in the NRHP, with concurrence by the Texas State Historic Preservation Officer (SHPO). The survey concluded that Building 30 is eligible for the NRHP under Criteria A and C in the context of the U.S. Space Shuttle Program (1969-2010). Because it has achieved significance within the past 50 years, Criteria Consideration G applies. It should be noted that the Mission Control Center was designated a National Historic Landmark in 1985 for its role in the Apollo 11 Lunar Landing. At the time of this documentation, Building 30 was still used to support the SSP as an engineering research facility, which is also sometimes used for astronaut training. This documentation package precedes any undertaking as defined by Section 106 of the NHPA, as amended, and implemented in 36 CFR Part 800, as NASA JSC has decided to proactively pursue efforts to mitigate the potential adverse affects of any future modifications to the facility. It includes a historical summary of the Space Shuttle program; the history of JSC in relation to the SSP; a narrative of the history of Building 30 and how it supported the SSP; and a physical description of the structure. In addition, photographs documenting the construction and historical use of Building 30 in support of the SSP, as well as photographs of the facility documenting the existing conditions, special technological features

  5. Communications and Tracking Development Laboratory/Building 44. Historical Documentation

    NASA Technical Reports Server (NTRS)

    Slovinac, Patricia

    2011-01-01

    As part of this nation-wide study, in September 2006, historical survey and evaluation of NASA-owned and managed facilities was conducted by NASA's Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The results of this study are presented in a report entitled, Survey and Evaluation of NASA-owned Historic Facilities and Properties in the Context of the U.S. Space Shuttle Program, Lyndon B. Johnson Space Center, Houston, Texas, prepared in November 2007 by NASA JSC s contractor, Archaeological Consultants, Inc. As a result of this survey, the Communications and Tracking Development Laboratory (Building 44) was determined eligible for listing in the NRHP, with concurrence by the Texas State Historic Preservation Officer (SHPO). The survey concluded that Building 44 is eligible for the NRHP under Criteria A and C in the context of the U.S. Space Shuttle Program (1969-2010). Because it has achieved significance within the past 50 years, Criteria Consideration G applies. At the time of this documentation, Building 44 was still used to support the SSP as an engineering research facility, which is also sometimes used for astronaut training. This documentation package precedes any undertaking as defined by Section 106 of the NHPA, as amended, and implemented by 36 CFR Part 800, as NASA JSC has decided to proactively pursue efforts to mitigate the potential adverse affects of any future modifications to the facility. It includes a historical summary of the Space Shuttle Program; the history of JSC in relation to the SSP; a narrative of the history of Building 44 and how it supported the SSP; and a physical description of the building. In addition, photographs documenting the construction and historical use of Building 44 in support of the SSP, as well as photographs of the facility documenting the existing conditions, special technological features, and engineering details, are included. A contact sheet printed on archival paper, and an electronic copy of the work

  6. Choguita Rarámuri (Tarahumara) Language Description and Documentation: A Guide to the Deposited Collection and Associated Materials

    ERIC Educational Resources Information Center

    Caballero, Gabriela

    2017-01-01

    Choguita Rarámuri (Tarahumara) is a Uto-Aztecan language spoken in Northern Mexico of great typological, theoretical, and historical significance. This paper presents an overview and background of the Choguita Rarámuri language description and documentation project and provides a guide to the documentary collection emerging from this project. This…

  7. 30 CFR 285.632 - What documents must I submit before I may construct and install facilities under my approved COP?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... construct and install facilities under my approved COP? 285.632 Section 285.632 Mineral Resources MINERALS... FACILITIES ON THE OUTER CONTINENTAL SHELF Plans and Information Requirements Activities Under An Approved Cop... COP? (a) You must submit to MMS the documents listed in the following table: ER29AP09.124 (b) You must...

  8. Supplemental design requirements document, Multifunction Waste Tank Facility, Project W-236A. Revision 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Groth, B.D.

    The Multi-Function Waste Tank Facility (MWTF) consists of four, nominal 1 million gallon, underground double-shell tanks, located in the 200-East area, and two tanks of the same capacity in the 200-West area. MWTF will provide environmentally safe storage capacity for wastes generated during remediation/retrieval activities of existing waste storage tanks. This document delineates in detail the information to be used for effective implementation of the Functional Design Criteria requirements.

  9. Liquid Metal Fast Breeder Reactor Program: Argonne facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stephens, S. V.

    1976-09-01

    The objective of the document is to present in one volume an overview of the Argonne National Laboratory test facilities involved in the conduct of the national LMFBR research and development program. Existing facilities and those under construction or authorized as of September 1976 are described. Each profile presents brief descriptions of the overall facility and its test area and data relating to its experimental and testing capability. The volume is divided into two sections: Argonne-East and Argonne-West. Introductory material for each section includes site and facility maps. The profiles are arranged alphabetically by title according to their respective locationsmore » at Argonne-East or Argonne-West. A glossary of acronyms and letter designations in common usage to describe organizations, reactor and test facilities, components, etc., involved in the LMFBR program is appended.« less

  10. Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Coenenberg, J.G.

    1997-08-15

    The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, `operating` treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit applicationmore » guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than

  11. Detailed costing document for the centralized waste treatment industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-12-01

    In this document, EPA presents the costs estimated for compliance with the proposed CWT effluent limitations guidelines and standards. Section 1 provides a general description of how the individual treatment technology and regulatory option costs were developed. In Sections 2 through 4, EPA describes the development of costs for each of the wastewater and sludge treatment technologies. In Section 5, EPA presents additional compliance costs to be incurred by facilities, which are not technology specific. These additional items are retrofit costs, monitoring costs, RCRA permit modification costs, and land costs.

  12. ENDF/B summary documentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kinsey, R.

    1979-07-01

    This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containingmore » partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information. (RWR)« less

  13. Assessment of text documentation accompanying uncoded diagnoses in computerized health insurance claims in Japan.

    PubMed

    Tanihara, Shinichi

    2015-01-01

    Uncoded diagnoses in health insurance claims (HICs) may introduce bias into Japanese health statistics dependent on computerized HICs. This study's aim was to identify the causes and characteristics of uncoded diagnoses. Uncoded diagnoses from computerized HICs (outpatient, inpatient, and the diagnosis procedure-combination per-diem payment system [DPC/PDPS]) submitted to the National Health Insurance Organization of Kumamoto Prefecture in May 2010 were analyzed. The text documentation accompanying the uncoded diagnoses was used to classify diagnoses in accordance with the International Classification of Diseases-10 (ICD-10). The text documentation was also classified into four categories using the standard descriptions of diagnoses defined in the master files of the computerized HIC system: 1) standard descriptions of diagnoses, 2) standard descriptions with a modifier, 3) non-standard descriptions of diagnoses, and 4) unclassifiable text documentation. Using these classifications, the proportions of uncoded diagnoses by ICD-10 disease category were calculated. Of the uncoded diagnoses analyzed (n = 363 753), non-standard descriptions of diagnoses for outpatient, inpatient, and DPC/PDPS HICs comprised 12.1%, 14.6%, and 1.0% of uncoded diagnoses, respectively. The proportion of uncoded diagnoses with standard descriptions with a modifier for Diseases of the eye and adnexa was significantly higher than the overall proportion of uncoded diagnoses among every HIC type. The pattern of uncoded diagnoses differed by HIC type and disease category. Evaluating the proportion of uncoded diagnoses in all medical facilities and developing effective coding methods for diagnoses with modifiers, prefixes, and suffixes should reduce number of uncoded diagnoses in computerized HICs and improve the quality of HIC databases.

  14. Facilities Condition and Hazards Assessment for Materials and Fuel Complex Facilities MFC-799, 799A, and 770C

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gary Mecham; Don Konoyer

    2009-11-01

    The Materials & Fuel Complex (MFC) facilities 799 Sodium Processing Facility (a single building consisting of two areas: the Sodium Process Area (SPA) and the Carbonate Process Area (CPA), 799A Caustic Storage Area, and 770C Nuclear Calibration Laboratory have been declared excess to future Department of Energy mission requirements. Transfer of these facilities from Nuclear Energy to Environmental Management, and an associated schedule for doing so, have been agreed upon by the two offices. The prerequisites for this transfer to occur are the removal of nonexcess materials and chemical inventory, deinventory of the calibration source in MFC-770C, and the reroutingmore » and/or isolation of utility and service systems. This report provides a description of the current physical condition and any hazards (material, chemical, nuclear or occupational) that may be associated with past operations of these facilities. This information will document conditions at time of transfer of the facilities from Nuclear Energy to Environmental Management and serve as the basis for disposition planning. The process used in obtaining this information included document searches, interviews and facility walk-downs. A copy of the facility walk-down checklist is included in this report as Appendix A. MFC-799/799A/770C are all structurally sound and associated hazardous or potentially hazardous conditions are well defined and well understood. All installed equipment items (tanks, filters, etc.) used to process hazardous materials remain in place and appear to have maintained their integrity. There is no evidence of leakage and all openings are properly sealed or closed off and connections are sound. The pits appear clean with no evidence of cracking or deterioration that could lead to migration of contamination. Based upon the available information/documentation reviewed and the overall conditions observed during the facilities walk-down, it is concluded that these facilities may be

  15. InterFacility communications technical document 1.1

    DOT National Transportation Integrated Search

    1996-04-01

    InterFacility (IF) communications allows 2 adjacent air traffic control (ATC) facilities to communicate with each other. IF is simulated in TGF to allow whatever lab we are responding to (ARTS/NAS) to simulate communications with one or more adjacent...

  16. Spent nuclear fuel project cold vacuum drying facility operations manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    IRWIN, J.J.

    This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998) and, the HNF-SD-SNF-DRD-002, 1997, Cold Vacuum Drying Facility Design Requirements, Rev. 3a. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence, and has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of themore » CVDF until the CVDF final ORR is approved.« less

  17. ICESat (GLAS) Science Processing Software Document Series. Volume 2; Science Data Management Plan; 4.0

    NASA Technical Reports Server (NTRS)

    Jester, Peggy L.; Hancock, David W., III

    1999-01-01

    This document provides the Data Management Plan for the GLAS Standard Data Software (SDS) supporting the GLAS instrument of the EOS ICESat Spacecraft. The SDS encompasses the ICESat Science Investigator-led Processing System (I-SIPS) Software and the Instrument Support Facility (ISF) Software. This Plan addresses the identification, authority, and description of the interface nodes associated with the GLAS Standard Data Products and the GLAS Ancillary Data.

  18. Guidelines for Documentation of Computer Programs and Automated Data Systems. (Category: Software; Subcategory: Documentation).

    ERIC Educational Resources Information Center

    Federal Information Processing Standards Publication, 1976

    1976-01-01

    These guidelines provide a basis for determining the content and extent of documentation for computer programs and automated data systems. Content descriptions of ten document types plus examples of how management can determine when to use the various types are included. The documents described are (1) functional requirements documents, (2) data…

  19. Pima Community College Facilities Specification for a Library/Student Center Prototype. Final [Report].

    ERIC Educational Resources Information Center

    Paulien, Daniel K.; Thibodeau, Yvonne

    This document is a description of a prototype Library/Student Center designed to serve approximately 10,000 students at a comprehensive campus. Prepared by the firm Paulien & Associates, Inc., of Denver, Colorado, this prototype will serve a design basis for facilities at all Pima Community College (PCC) campuses. The prototype will not be…

  20. Extended Subject Access to Hypertext Online Documentation. Part III: The Document-Boundaries Problem.

    ERIC Educational Resources Information Center

    Girill, T. R.

    1991-01-01

    This article continues the description of DFT (Document, Find, Theseus), an online documentation system that provides computer-managed on-demand printing of software manuals as well as the interactive retrieval of reference passages. Document boundaries in the hypertext database are discussed, search vocabulary complexities are described, and text…

  1. Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 2: Framework process description

    NASA Technical Reports Server (NTRS)

    Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paula S.; Crump, John W.; Ackley, Keith A.

    1992-01-01

    In the second volume of the Demonstration Framework Document, the graphical representation of the demonstration framework is given. This second document was created to facilitate the reading and comprehension of the demonstration framework. It is designed to be viewed in parallel with Section 4.2 of the first volume to help give a picture of the relationships between the UOB's (Unit of Behavior) of the model. The model is quite large and the design team felt that this form of presentation would make it easier for the reader to get a feel for the processes described in this document. The IDEF3 (Process Description Capture Method) diagrams of the processes of an Information System Development are presented. Volume 1 describes the processes and the agents involved with each process, while this volume graphically shows the precedence relationships among the processes.

  2. Achieving and documenting closure in plant growth facilities

    NASA Technical Reports Server (NTRS)

    Knott, W. M.; Sager, John C.; Wheeler, Ray

    1992-01-01

    As NASA proceeds with its effort to develop a Controlled Ecological Life Support System (CELSS) that will provide life support to crews during long duration space missions, it must address the question of facility and system closure. The concept of closure as it pertains to CELSS and engineering specifications, construction problems and monitoring procedures used in the development and operation of a closed plant growth facility for the CELSS program are described. A plant growth facility is one of several modules required for a CELSS. A prototype of this module at Kennedy Space Center is the large (7m tall x 3.5m diameter) Biomass Production Chamber (BPC), the central facility of the CELSS Breadboard Project. The BPC is atmospherically sealed to a leak rate of approximately 5 percent of its total volume per 24 hours. This paper will discuss the requirements for atmospheric closure in the facility, present CO2 and trace gas data from initial tests of the BPC with and without plants, and describe how the chamber was sealed atmospherically. Implications that research conducted in this type of facility will have for the CELSS program are discussed.

  3. Meteoroid and Debris Impact Features Documented on the Long Duration Exposure Facility: A Preliminary Report

    NASA Technical Reports Server (NTRS)

    See, T. (Compiler); Allbrooks, M. (Compiler); Atkinson, D. (Compiler); Simon, C. (Compiler); Zolensky, M. (Compiler)

    1990-01-01

    The Long Duration Exposure Facility (LDEF) was host to several individual experiments designed to characterize aspects of the meteoroid and space-debris environment in low-Earth orbit. It was realized from the very start, however, that the most complete way to accomplish this goal was to exploit the meteoroid and debris record of the entire LDEF. The Meteoroid and Debris Special Investigation Group (M&D SIG) was organized to achieve this end. Two dominant goals of the M&D SIG are the documentation of the impact record of the entire LDEF, and the dissemination of this information to all interested workers. As a major step towards the accomplishment of these goals, we have prepared this publication describing the M&D SIG observations of impact features made during LDEF deintegration activities at KSC in the spring of 1990. It is hoped that this report will serve as a useful guide for spacecraft designers as well as for meteoroid and space-debris workers, and that it will spur further work on the LDEF impact-laden surfaces collected by the M&D SIG and now available for allocation to qualified investigators. An important aim is to present all data and descriptions of impact features in a form which, though terse, remains comprehensible to the wider community. There is a deliberate minimum of interpretations. Thus, this catalog is intended to serve as a guide to the impact features found on LDEF and is not intended to stand as a definitive interpretive work.

  4. Preliminary Authorization Basis Documentation for the Proposed Bio Safety Level 3 (BSl-3) Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Altenbach, T J; Nguyen, S N

    2003-09-20

    Lawrence Livermore National Laboratory (LLNL) is proposing to construct a biosafety level (BSL-3) facility at Site 200 in Livermore, California. Biosafety level 3 (BSL-3) is a designation assigned by the Centers for Disease Control and Prevention (CDC) and National Institutes Health (NIH) for handling infectious organisms based on the specific microorganisms and associated operations. Biosafety levels range from BSL-1 (lowest hazard) to BSL-4 (highest hazard). Details about the BSL-3 criteria are described in the Center of Disease Control and Prevention (CDC)/National Institutes of Health (NIH)'s publication ''Biosafety Microbiological and Biomedical Laboratories'' (BMBL), 4th edition (CDC 1999): The BSL-3 facility willmore » be built in accordance with the required BMBL guidelines. This Preliminary Authorization Basis Documentation (PABD) for the proposed BSL-3 facility has been prepared in accordance with the current contractual requirements at LLNL. This includes the LLNL Environment, Safety, and Health Manual (ES&H Manual) and applicable Work Smart Standards, including the biosafety standards, such as the aforementioned BMBL and the NIH Guidelines for Research Involving Recombinant DNA Molecules: The proposed BSL-3 facility is a 1,100 ft{sup 2}, one-story permanent prefabricated facility, which will have three individual BSL-3 laboratory rooms (one of which is an animal biosafety level-3 [ABSL-3] laboratory to handle rodents), a mechanical room, clothes-change and shower rooms, and small storage space (Figure 3.1). The BSL-3 facility will be designed and operated accordance with guidelines for BSL-3 laboratories established by the CDC and the NIH. No radiological, high explosives, fissile, or propellant material will be used or stored in the proposed BSL-3 facility. The BSL-3 facility will be used to develop scientific tools to identify and understand the pathogens of medical, environmental, and forensic importance. Microorganisms that are to be handled in

  5. Life Sciences Space Station planning document: A reference payload for the Life Sciences Research Facility

    NASA Technical Reports Server (NTRS)

    1986-01-01

    The Space Station, projected for construction in the early 1990s, will be an orbiting, low-gravity, permanently manned facility providing unprecedented opportunities for scientific research. Facilities for Life Sciences research will include a pressurized research laboratory, attached payloads, and platforms which will allow investigators to perform experiments in the crucial areas of Space Medicine, Space Biology, Exobiology, Biospherics and Controlled Ecological Life Support System (CELSS). These studies are designed to determine the consequences of long-term exposure to space conditions, with particular emphasis on assuring the permanent presence of humans in space. The applied and basic research to be performed, using humans, animals, and plants, will increase our understanding of the effects of the space environment on basic life processes. Facilities being planned for remote observations from platforms and attached payloads of biologically important elements and compounds in space and on other planets (Exobiology) will permit exploration of the relationship between the evolution of life and the universe. Space-based, global scale observations of terrestrial biology (Biospherics) will provide data critical for understanding and ultimately managing changes in the Earth's ecosystem. The life sciences community is encouraged to participate in the research potential the Space Station facilities will make possible. This document provides the range and scope of typical life sciences experiments which could be performed within a pressurized laboratory module on Space Station.

  6. 10 CFR 55.27 - Documentation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Documentation. 55.27 Section 55.27 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) OPERATORS' LICENSES Medical Requirements § 55.27 Documentation. The facility licensee shall document and maintain the results of medical qualifications data, test results, and...

  7. Documentation of the GLAS fourth order general circulation model. Volume 1: Model documentation

    NASA Technical Reports Server (NTRS)

    Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, J.; Pfaendtner, J.; Takacs, L.; Takano, K.

    1983-01-01

    The volume 1, of a 3 volume technical memoranda which contains a documentation of the GLAS Fourth Order General Circulation Model is presented. Volume 1 contains the documentation, description of the stratospheric/tropospheric extension, user's guide, climatological boundary data, and some climate simulation studies.

  8. Baseline Description and Analysis of the Operations Related to Warehouse Controlled Documents at the Navy Publications and Forms Center, Philadelphia, Pennsylvania. Volume I. Phase I.

    DTIC Science & Technology

    1980-03-06

    performing the present NPFC tasks. Potential automation technologies may include order processing mechanization, demand printing from micrographic or...effort and documented in this volume included the following: a. Functional description of the order processing activities as they currently operate. b...covered under each analysis area. i It is obvious from the exhibit that the functional description of order processing operations was to include COG I

  9. DUB: A Format for Writing Descriptive Literature. Dissemination Document No. 9.

    ERIC Educational Resources Information Center

    Levine, S. Joseph; Keith, Kitty

    Presented is DUB (description, use, and benefits of an idea), a format for special education teachers to use in writing descriptions of self-developed materials and methods; and included are six examples of the format. The DUB format prescribes the inclusion in brief essay form of the following information: descriptive material (structural…

  10. IDC System Specification Document.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Clifford, David J.

    2014-12-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

  11. Documents, Dialogue and the Emergence of Tertiary Orality

    ERIC Educational Resources Information Center

    Turner, Deborah; Allen, Warren

    2013-01-01

    Introduction: This investigation opens with a description of why studying non-traditional, oral documents can inform efforts to extend traditional library and information science practices, of description, storage, and retrieval, to artefacts made available through emerging media. Method: This study extends the method used to identify a document,…

  12. NASA in-house Commercially Developed Space Facility (CDSF) study report. Volume 1: Concept configuration definition

    NASA Technical Reports Server (NTRS)

    Deryder, L. J.; Chiger, H. D.; Deryder, D. D.; Detweiler, K. N.; Dupree, R. L.; Gillespie, V. P.; Hall, J. B.; Heck, M. L.; Herrick, D. C.; Katzberg, S. J.

    1989-01-01

    The results of a NASA in-house team effort to develop a concept definition for a Commercially Developed Space Facility (CDSF) are presented. Science mission utilization definition scenarios are documented, the conceptual configuration definition system performance parameters qualified, benchmark operational scenarios developed, space shuttle interface descriptions provided, and development schedule activity was assessed with respect to the establishment of a proposed launch date.

  13. Description of Liquid Nitrogen Experimental Test Facility

    NASA Technical Reports Server (NTRS)

    Jurns, John M.; Jacobs, Richard E.; Saiyed, Naseem H.

    1991-01-01

    The Liquid Nitrogen Test Facility is a unique test facility for ground-based liquid nitrogen experimentation. The test rig consists of an insulated tank of approximately 12.5 cubic ft in volume, which is supplied with liquid nitrogen from a 300 gal dewar via a vacuum jacketed piping system. The test tank is fitted with pressure and temperature measuring instrumentation, and with two view ports which allow visual observation of test conditions. To demonstrate the capabilities of the facility, the initial test program is briefly described. The objective of the test program is to measure the condensation rate by injecting liquid nitrogen as a subcooled spray into the ullage of a tank 50 percent full of liquid nitrogen at saturated conditions. The condensation rate of the nitrogen vapor on the subcooled spray can be analytically modeled, and results validated and corrected by experimentally measuring the vapor condensation on liquid sprays.

  14. Description of liquid nitrogen experimental test facility

    NASA Technical Reports Server (NTRS)

    Jurns, J. M.; Jacobs, R. E.; Saiyed, N. H.

    1992-01-01

    The Liquid Nitrogen Test Facility is a unique test facility for ground-based liquid nitrogen experimentation. The test rig consists of an insulated tank of approximately 12.5 cubic ft in volume, which is supplied with liquid nitrogen from a 300 gal dewar via a vacuum jacketed piping system. The test tank is fitted with pressure and temperature measuring instrumentation, and with two view ports which allow visual observation of test conditions. To demonstrate the capabilities of the facility, the initial test program is briefly described. The objective of the test program is to measure the condensation rate by injecting liquid nitrogen as a subcooled spray into the ullage of a tank 50 percent full of liquid nitrogen at saturated conditions. The condensation rate of the nitrogen vapor on the subcooled spray can be analytically modeled, and results validated and corrected by experimentally measuring the vapor condensation on liquid sprays.

  15. 7 CFR 1753.58 - Closeout documents.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

  16. 7 CFR 1753.58 - Closeout documents.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

  17. 7 CFR 1753.58 - Closeout documents.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

  18. 7 CFR 1753.58 - Closeout documents.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

  19. 7 CFR 1753.58 - Closeout documents.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...

  20. Program Helps Standardize Documentation Of Software

    NASA Technical Reports Server (NTRS)

    Howe, G.

    1994-01-01

    Intelligent Documentation Management System, IDMS, computer program developed to assist project managers in implementing information system documentation standard known as NASA-STD-2100-91, NASA STD, COS-10300, of NASA's Software Management and Assurance Program. Standard consists of data-item descriptions or templates, each of which governs particular component of software documentation. IDMS helps program manager in tailoring documentation standard to project. Written in C language.

  1. Documenting AUTOGEN and APGEN Model Files

    NASA Technical Reports Server (NTRS)

    Gladden, Roy E.; Khanampompan, Teerapat; Fisher, Forest W.; DelGuericio, Chris c.

    2008-01-01

    A computer program called "autogen hypertext map generator" satisfies a need for documenting and assisting in visualization of, and navigation through, model files used in the AUTOGEN and APGEN software mentioned in the two immediately preceding articles. This program parses autogen script files, autogen model files, PERL scripts, and apgen activity-definition files and produces a hypertext map of the files to aid in the navigation of the model. This program also provides a facility for adding notes and descriptions, beyond what is in the source model represented by the hypertext map. Further, this program provides access to a summary of the model through variable, function, sub routine, activity and resource declarations as well as providing full access to the source model and source code. The use of the tool enables easy access to the declarations and the ability to traverse routines and calls while analyzing the model.

  2. Medical Treatment Facility Workload Documentation Guide.

    DTIC Science & Technology

    1980-04-15

    to the system implementation should be presented. This document is intended as a guidebook for determining the site specific characteristics of an...wide volume analysis of a communications system. Prior to collecting any data, objectives and initial operating characteristics of the system(s...unique characteristics involved. An on-site inspection of all spaces to be impacted by NIS implementation is required initially. During this inspection

  3. Full value documentation in the Czech Food Composition Database.

    PubMed

    Machackova, M; Holasova, M; Maskova, E

    2010-11-01

    The aim of this project was to launch a new Food Composition Database (FCDB) Programme in the Czech Republic; to implement a methodology for food description and value documentation according to the standards designed by the European Food Information Resource (EuroFIR) Network of Excellence; and to start the compilation of a pilot FCDB. Foods for the initial data set were selected from the list of foods included in the Czech Food Consumption Basket. Selection of 24 priority components was based on the range of components used in former Czech tables. The priority list was extended with components for which original Czech analytical data or calculated data were available. Values that were input into the compiled database were documented according to the EuroFIR standards within the entities FOOD, COMPONENT, VALUE and REFERENCE using Excel sheets. Foods were described using the LanguaL Thesaurus. A template for documentation of data according to the EuroFIR standards was designed. The initial data set comprised documented data for 162 foods. Values were based on original Czech analytical data (available for traditional and fast foods, milk and milk products, wheat flour types), data derived from literature (for example, fruits, vegetables, nuts, legumes, eggs) and calculated data. The Czech FCDB programme has been successfully relaunched. Inclusion of the Czech data set into the EuroFIR eSearch facility confirmed compliance of the database format with the EuroFIR standards. Excel spreadsheets are applicable for full value documentation in the FCDB.

  4. DUF6 Conversion Facility EISs

    Science.gov Websites

    Conversion EIS Documents News FAQs Internet Resources Glossary Home » Conversion Facility EISs EIS Logo Guide | DU Uses | DUF6 Management | DUF6 Conversion Facility EISs | Documents News | FAQs | Internet

  5. The Advancement of Public Awareness, Concerning TRU Waste Characterization, Using a Virtual Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    West, T. B.; Burns, T. P.; Estill, W. G.

    2002-02-28

    Building public trust and confidence through openness is a goal of the DOE Carlsbad Field Office for the Waste Isolation Pilot Plant (WIPP). The objective of the virtual document described in this paper is to give the public an overview of the waste characterization steps, an understanding of how waste characterization instrumentation works, and the type and amount of data generated from a batch of drums. The document is intended to be published on a web page and/or distributed at public meetings on CDs. Users may gain as much information as they desire regarding the transuranic (TRU) waste characterization program,more » starting at the highest level requirements (drivers) and progressing to more and more detail regarding how the requirements are met. Included are links to: drivers (which include laws, permits and DOE Orders); various characterization steps required for transportation and disposal under WIPP's Hazardous Waste Facility Permit; physical/chemical basis for each characterization method; types of data produced; and quality assurance process that accompanies each measurement. Examples of each type of characterization method in use across the DOE complex are included. The original skeleton of the document was constructed in a PowerPoint presentation and included descriptions of each section of the waste characterization program. This original document had a brief overview of Acceptable Knowledge, Non-Destructive Examination, Non-Destructive Assay, Small Quantity sites, and the National Certification Team. A student intern was assigned the project of converting the document to a virtual format and to discuss each subject in depth. The resulting product is a fully functional virtual document that works in a web browser and functions like a web page. All documents that were referenced, linked to, or associated, are included on the virtual document's CD. WIPP has been engaged in a variety of Hazardous Waste Facility Permit modification activities. During

  6. 3718-F Alkali Metal Treatment and Storage Facility Closure Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Since 1987, Westinghouse Hanford Company has been a major contractor to the U.S. Department of Energy-Richland Operations Office and has served as co-operator of the 3718-F Alkali Metal Treatment and Storage Facility, the waste management unit addressed in this closure plan. The closure plan consists of a Part A Dangerous waste Permit Application and a RCRA Closure Plan. An explanation of the Part A Revision (Revision 1) submitted with this document is provided at the beginning of the Part A section. The closure plan consists of 9 chapters and 5 appendices. The chapters cover: introduction; facility description; process information; wastemore » characteristics; groundwater; closure strategy and performance standards; closure activities; postclosure; and references.« less

  7. Synchronous meteorological satellite system description document, volume 3

    NASA Technical Reports Server (NTRS)

    Pipkin, F. B.

    1971-01-01

    The structural design, analysis, and mechanical integration of the synchronous meteorological satellite system are presented. The subjects discussed are: (1) spacecraft configuration, (2) structural design, (3) static load tests, (4) fixed base sinusoidal vibration survey, (5) flight configuration sinusoidal vibration tests, (6) spacecraft acoustic test, and (7) separation and shock test. Descriptions of the auxiliary propulsion subsystem, the apogee boost motor, communications system, and thermal control subsystem are included.

  8. Airspace Technology Demonstration 2 (ATD-2) Technology Description Document (TDD)

    NASA Technical Reports Server (NTRS)

    Ging, Andrew; Engelland, Shawn; Capps, Al; Eshow, Michelle; Jung, Yoon; Sharma, Shivanjli; Talebi, Ehsan; Downs, Michael; Freedman, Cynthia; Ngo, Tyler; hide

    2018-01-01

    This Technology Description Document (TDD) provides an overview of the technology for the Phase 1 Baseline Integrated Arrival, Departure, and Surface (IADS) prototype system of the National Aeronautics and Space Administration's (NASA) Airspace Technology Demonstration 2 (ATD-2) project, to be demonstrated beginning in 2017 at Charlotte Douglas International Airport (CLT). Development, integration, and field demonstration of relevant technologies of the IADS system directly address recommendations made by the Next Generation Air Transportation System (NextGen) Integration Working Group (NIWG) on Surface and Data Sharing and the Surface Collaborative Decision Making (Surface CDM) concept of operations developed jointly by the Federal Aviation Administration (FAA) and aviation industry partners. NASA is developing the IADS traffic management system under the ATD-2 project in coordination with the FAA, flight operators, CLT airport, and the National Air Traffic Controllers Association (NATCA). The primary goal of ATD-2 is to improve the predictability and operational efficiency of the air traffic system in metroplex environments, through the enhancement, development, and integration of the nation's most advanced and sophisticated arrival, departure, and surface prediction, scheduling, and management systems. The ATD-2 project is a 5-year research activity beginning in 2015 and extending through 2020. The Phase 1 Baseline IADS capability resulting from the ATD-2 research will be demonstrated at the CLT airport beginning in 2017. Phase 1 will provide the initial demonstration of the integrated system with strategic and tactical scheduling, tactical departure scheduling to an en route meter point, and an early implementation prototype of a Terminal Flight Data Manager (TFDM) Electronic Flight Data (EFD) system. The strategic surface scheduling element of the capability is consistent with the Surface CDM Concept of Operations published in 2014 by the FAA Surface

  9. Chapter 4: Variant descriptions

    Treesearch

    Duncan C. Lutes; Donald C. E. Robinson

    2003-01-01

    The Fire and Fuels Extension (FFE) to the Forest Vegetation Simulator (FVS) simulates fuel dynamics and potential fire behavior over time, in the context of stand development and management. This report documents differences between geographic variants of the FFE. It is a companion document to the FFE "Model Description" and "User's Guide."...

  10. Audit of availability and distribution of paediatric cardiology services and facilities in Nigeria

    PubMed Central

    Ekure, Ekanem N; Sadoh, Wilson E; Bode-Thomas, Fidelia; Yilgwan, Christopher S; Orogade, Adeola A; Animasahun, Adeola B; Ogunkunle, Oluwatoyin O; Omokhodion, Samuel I; Babaniyi, Iretiola; Anah, Maxwell U; Otaigbe, Barbara E; Olowu, Adebiyi; Okpokowuruk, Frances; Maduka, Ogechi C; Onakpoya, Uvie U; Adiele, Daberechi K; Sani, Usman. M; Asani, Mustapha; Daniels, Queennette; Uzodimma, Chinyere C; Duru, Chika O; Abdulkadir, Mohammad B; Afolabi, Joseph K; Okeniyi, John A

    2017-01-01

    Summary Background Paediatric cardiac services in Nigeria have been perceived to be inadequate but no formal documentation of availability and distribution of facilities and services has been done. Objective: To evaluate and document the currently available paediatric cardiac services in Nigeria. Methods In this questionnaire-based, cross-sectional descriptive study, an audit was undertaken from January 2010 to December 2014, of the personnel and infrastructure, with their distributions according to geopolitical zones of Nigeria. Results Forty-eight centres participated in the study, with 33 paediatric cardiologists and 31 cardiac surgeons. Echocardiography, electrocardiography and pulse oximetry were available in 45 (93.8%) centres while paediatric intensive care units were in 23 (47.9%). Open-heart surgery was performed in six (12.5%) centres. South-West zone had the majority of centres (20; 41.7%). Conclusions Available paediatric cardiac services in Nigeria are grossly inadequate and poorly distributed. Efforts should be intensified to upgrade existing facilities, establish new and functional centres, and train personnel. PMID:27701490

  11. Audit of availability and distribution of paediatric cardiology services and facilities in Nigeria.

    PubMed

    Ekure, Ekanem N; Sadoh, Wilson E; Bode-Thomas, Fidelia; Orogade, Adeola A; Animasahun, Adeola B; Ogunkunle, Oluwatoyin O; Babaniyi, Iretiola; Anah, Maxwell U; Otaigbe, Barbara E; Olowu, Adebiyi; Okpokowuruk, Frances; Omokhodion, Samuel I; Maduka, Ogechi C; Onakpoya, Uvie U; Adiele, Daberechi K; Sani, Usman M; Asani, Mustapha; Yilgwan, Christopher S; Daniels, Queennette; Uzodimma, Chinyere C; Duru, Chika O; Abdulkadir, Mohammad B; Afolabi, Joseph K; Okeniyi, John A

    Paediatric cardiac services in Nigeria have been perceived to be inadequate but no formal documentation of availability and distribution of facilities and services has been done. To evaluate and document the currently available paediatric cardiac services in Nigeria. In this questionnaire-based, cross-sectional descriptive study, an audit was undertaken from January 2010 to December 2014, of the personnel and infrastructure, with their distributions according to geopolitical zones of Nigeria. Forty-eight centres participated in the study, with 33 paediatric cardiologists and 31 cardiac surgeons. Echocardiography, electrocardiography and pulse oximetry were available in 45 (93.8%) centres while paediatric intensive care units were in 23 (47.9%). Open-heart surgery was performed in six (12.5%) centres. South-West zone had the majority of centres (20; 41.7%). Available paediatric cardiac services in Nigeria are grossly inadequate and poorly distributed. Efforts should be intensified to upgrade existing facilities, establish new and functional centres, and train personnel.

  12. Assessment and documentation of non-healing, chronic wounds in inpatient health care facilities in the Czech Republic: an evaluation study.

    PubMed

    Pokorná, Andrea; Leaper, David

    2015-04-01

    The foundation of health care management of patients with non-healing, chronic wounds needs accurate evaluation followed by the selection of an appropriate therapeutic strategy. Assessment of non-healing, chronic wounds in clinical practice in the Czech Republic is not standardised. The aim of this study was to analyse the methods being used to assess non-healing, chronic wounds in inpatient facilities in the Czech Republic. The research was carried out at 77 inpatient medical facilities (8 university/faculty hospitals, 63 hospitals and 6 long- term hospitals) across all regions of the Czech Republic. A mixed model was used for the research (participatory observation including creation of field notes and content analysis of documents for documentation and analysis of qualitative and quantitative data). The results of this research have corroborated the suspicion of inconsistencies in procedures used by general nurses for assessment of non-healing, chronic wounds. However, the situation was found to be more positive with regard to evaluation of basic/fundamental parameters of a wound (e.g. size, depth and location of a wound) compared with the evaluation of more specific parameters (e.g. exudate or signs of infection). This included not only the number of observed variables, but also the action taken. Both were significantly improved when a consultant for wound healing was present (P = 0·047). The same applied to facilities possessing a certificate of quality issued by the Czech Wound Management Association (P = 0·010). In conclusion, an effective strategy for wound management depends on the method and scope of the assessment of non-healing, chronic wounds in place in clinical practice in observed facilities; improvement may be expected following the general introduction of a 'non-healing, chronic wound assessment' algorithm. © 2014 The Authors. International Wound Journal © 2014 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  13. Documentation: Records and Reports.

    PubMed

    Akers, Michael J

    2017-01-01

    This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  14. Functional Description of Air Traffic Control

    DOT National Transportation Integrated Search

    1971-04-01

    The document contains a description of air traffic control in terms of generic operational functions. The functions are grouped by flight phase and by major system function (navigation, surveillance, control and communication). More detailed descript...

  15. 10 CFR 830.204 - Documented safety analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Documented safety analysis. 830.204 Section 830.204 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.204 Documented safety analysis... approval from DOE for the methodology used to prepare the documented safety analysis for the facility...

  16. Descriptive approaches to landscape analysis

    Treesearch

    R. Burton Litton Jr.

    1979-01-01

    Descriptive landscape analyses include various procedures used to document visual/scenic resources. Historic and regional examples of landscape description represent desirable insight for contemporary professional inventory work. Routed and areal landscape inventories are discussed as basic tools. From them, qualitative and quantitative evaluations can be developed...

  17. Documentation and Development. Experience in Algeria

    ERIC Educational Resources Information Center

    Tchuigoua, J. Founou

    1972-01-01

    A description of the activities of the Documentation, Library and Archives Department of the Algiers Chamber of Commerce and Industry, which is run by a small staff on a modest budget, provides documentation services for the staff of the Chamber of Commerce and also assists other centers in Algeria. (Author)

  18. Engineering Documentation and Data Control

    NASA Technical Reports Server (NTRS)

    Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

    2001-01-01

    Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

  19. Description of a Remote Ionospheric Scintillation Data Collection Facility

    DOT National Transportation Integrated Search

    1973-03-01

    An experimental technique is described which measures L-band ionospheric scintillation at a remote, unmanned site. Details of an automatic data collection facility are presented. The remote facility comprises an L-band receiver, and a complete VHF co...

  20. Description and Operation of the A3 Subscale Facility

    NASA Technical Reports Server (NTRS)

    Saunders, G. P.; Varner, D. G.; Grover, J. B.

    2010-01-01

    The purpose of this paper is to give an overview of the general design and operation of the A3 Subscale test facility. The goal is to provide the reader with a general understanding of what the major facility systems are, where they are located, and how they are used to meet the objectives supporting the design of the A3 altitude rocket test facility. This paper also provides the reader with the background information prior to reading the subsequent papers detailing the design and test results of the various systems described herein.

  1. Baseline tests for arc melter vitrification of INEL buried wastes. Volume 1: Facility description and summary data report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Oden, L.L.; O`Connor, W.K.; Turner, P.C.

    1993-11-19

    This report presents field results and raw data from the Buried Waste Integrated Demonstration (BWID) Arc Melter Vitrification Project Phase 1 baseline test series conducted by the Idaho National Engineering Laboratory (INEL) in cooperation with the U.S. Bureau of Mines (USBM). The baseline test series was conducted using the electric arc melter facility at the USBM Albany Research Center in Albany, Oregon. Five different surrogate waste feed mixtures were tested that simulated thermally-oxidized, buried, TRU-contaminated, mixed wastes and soils present at the INEL. The USBM Arc Furnace Integrated Waste Processing Test Facility includes a continuous feed system, the arc meltingmore » furnace, an offgas control system, and utilities. The melter is a sealed, 3-phase alternating current (ac) furnace approximately 2 m high and 1.3 m wide. The furnace has a capacity of 1 metric ton of steel and can process as much as 1,500 lb/h of soil-type waste materials. The surrogate feed materials included five mixtures designed to simulate incinerated TRU-contaminated buried waste materials mixed with INEL soil. Process samples, melter system operations data and offgas composition data were obtained during the baseline tests to evaluate the melter performance and meet test objectives. Samples and data gathered during this program included (a) automatically and manually logged melter systems operations data, (b) process samples of slag, metal and fume solids, and (c) offgas composition, temperature, velocity, flowrate, moisture content, particulate loading and metals content. This report consists of 2 volumes: Volume I summarizes the baseline test operations. It includes an executive summary, system and facility description, review of the surrogate waste mixtures, and a description of the baseline test activities, measurements, and sample collection. Volume II contains the raw test data and sample analyses from samples collected during the baseline tests.« less

  2. Aeropropulsion facilities configuration control: Procedures manual

    NASA Technical Reports Server (NTRS)

    Lavelle, James J.

    1990-01-01

    Lewis Research Center senior management directed that the aeropropulsion facilities be put under configuration control. A Configuration Management (CM) program was established by the Facilities Management Branch of the Aeropropulsion Facilities and Experiments Division. Under the CM program, a support service contractor was engaged to staff and implement the program. The Aeronautics Directorate has over 30 facilities at Lewis of various sizes and complexities. Under the program, a Facility Baseline List (FBL) was established for each facility, listing which systems and their documents were to be placed under configuration control. A Change Control System (CCS) was established requiring that any proposed changes to FBL systems or their documents were to be processed as per the CCS. Limited access control of the FBL master drawings was implemented and an audit system established to ensure all facility changes are properly processed. This procedures manual sets forth the policy and responsibilities to ensure all key documents constituting a facilities configuration are kept current, modified as needed, and verified to reflect any proposed change. This is the essence of the CM program.

  3. Space exploration initiative candidate nuclear propulsion test facilities

    NASA Technical Reports Server (NTRS)

    Baldwin, Darrell; Clark, John S.

    1993-01-01

    One-page descriptions for approximately 200 existing government, university, and industry facilities which may be available in the future to support SEI nuclear propulsion technology development and test program requirements are provided. To facilitate use of the information, the candidate facilities are listed both by location (Index L) and by Facility Type (Index FT). The included one-page descriptions provide a brief narrative description of facility capability, suggest potential uses for each facility, and designate a point of contact for additional information that may be needed in the future. The Nuclear Propulsion Office at NASA Lewis presently plans to maintain, expand, and update this information periodically for use by NASA, DOE, and DOD personnel involved in planning various phases of the SEI Nuclear Propulsion Project.

  4. Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 2: Cryo/aerobrake vehicle

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The cryogenic/aerobrake (CAB) and the cryogenic all-propulsive (CAP) concept designs developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study are presented. The evolution of the CAB and CAP concepts is described along with the requirements, guidelines and assumptions for the designs. Operating modes and options are defined and systems descriptions of the vehicles are presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.

  5. Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 5: Nuclear electric propulsion vehicle

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The nuclear electric propulsion (NEP) concept design developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study is presented. The evolution of the NEP concept is described along with the requirements, guidelines, and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities and costs.

  6. 18 CFR 5.6 - Pre-application document.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... project, including any daily or seasonal ramping rates, flushing flows, reservoir operations, and flood... document must describe the existing and proposed (if any) project facilities and operations, provide...)(viii). (2) Project location, facilities, and operations. The potential applicant must include in the...

  7. Ontology-based reusable clinical document template production system.

    PubMed

    Nam, Sejin; Lee, Sungin; Kim, James G Boram; Kim, Hong-Gee

    2012-01-01

    Clinical documents embody professional clinical knowledge. This paper shows an effective clinical document template (CDT) production system that uses a clinical description entity (CDE) model, a CDE ontology, and a knowledge management system called STEP that manages ontology-based clinical description entities. The ontology represents CDEs and their inter-relations, and the STEP system stores and manages CDE ontology-based information regarding CDTs. The system also provides Web Services interfaces for search and reasoning over clinical entities. The system was populated with entities and relations extracted from 35 CDTs that were used in admission, discharge, and progress reports, as well as those used in nursing and operation functions. A clinical document template editor is shown that uses STEP.

  8. Documentation and archiving of the Space Shuttle wind tunnel test data base. Volume 1: Background and description

    NASA Technical Reports Server (NTRS)

    Romere, Paul O.; Brown, Steve Wesley

    1995-01-01

    Development of the space shuttle necessitated an extensive wind tunnel test program, with the cooperation of all the major wind tunnels in the United States. The result was approximately 100,000 hours of space shuttle wind tunnel testing conducted for aerodynamics, heat transfer, and structural dynamics. The test results were converted into Chrysler DATAMAN computer program format to facilitate use by analysts, a very cost effective method of collecting the wind tunnel test results from many test facilities into one centralized location. This report provides final documentation of the space shuttle wind tunnel program. The two-volume set covers evolution of space shuttle aerodynamic configurations and gives wind tunnel test data, titles of wind tunnel data reports, sample data sets, and instructions for accessing the digital data base.

  9. Document Set Differentiability Analyzer v. 0.1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Osborn, Thor D.

    Software is a JMP Scripting Language (JSL) script designed to evaluate the differentiability of a set of documents that exhibit some conceptual commonalities but are expected to describe substantially different – thus differentiable – categories. The script imports the document set, a subset of which may be partitioned into an additions pool. The bulk of the documents form a basis pool. Text analysis is applied to the basis pool to extract a mathematical representation of its conceptual content, referred to as the document concept space. A bootstrapping approach is applied to that mathematical representation in order to generate a representationmore » of a large population of randomly designed documents that could be written within the concept space, notably without actually writing the text of those documents.The Kolmogorov-Smirnov test is applied to determine whether the basis pool document set exhibits superior differentiation relative to the randomly designed virtual documents produced by bootstrapping. If an additions pool exists, the documents are incrementally added to the basis pool, choosing the best differentiated remaining document at each step. In this manner the impact of additional categories to overall document set differentiability may be assessed.The software was developed to assess the differentiability of job description document sets. Differentiability is key to meaningful categorization. Poor job differentiation may have economic, ethical, and/or legal implications for an organization. Job categories are used in the assignment of market-based salaries; consequently, poor differentiation of job duties may set the stage for legal challenges if very similar jobs pay differently depending on title, a circumstance that also invites economic waste.The software can be applied to ensure job description set differentiability, reducing legal, economic, and ethical risks to an organization and its people. The extraction of the conceptual space to a

  10. Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). A description of the sensor, ground data processing facility, laboratory calibration, and first results

    NASA Technical Reports Server (NTRS)

    Vane, Gregg (Editor)

    1987-01-01

    The papers in this document were presented at the Imaging Spectroscopy 2 Conference of the 31st International Symposium on Optical and Optoelectronic Applied Science and Engineering, in San Diego, California, on 20 and 21 August 1987. They describe the design and performance of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) sensor and its subsystems, the ground data processing facility, laboratory calibration, and first results.

  11. Facility effluent monitoring plan for the plutonium uranium extraction facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wiegand, D.L.

    A facility effluent monitoring plan is required by the US Department of Energy in DOE Order 5400.1 for any operations that involve hazardous materials and radioactive substances that could impact employee or public safety or the environment. This document is prepared using the specific guidelines identified in A Guide for Preparing Hanford Site Facility Effluent Monitoring Plans, WHC-EP-0438-01. This facility effluent monitoring plan assesses effluent monitoring systems and evaluates whether they are adequate to ensure the public health and safety as specified in applicable federal, state, and local requirements. This facility effluent monitoring plan shall ensure long-range integrity of themore » effluent monitoring systems by requiring an update whenever a new process or operation introduces new hazardous materials or significant radioactive materials. This document must be reviewed annually even if there are no operational changes, and it must be updated at a minimum of every three years.« less

  12. System Design Description for the TMAD Code

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Finfrock, S.H.

    This document serves as the System Design Description (SDD) for the TMAD Code System, which includes the TMAD code and the LIBMAKR code. The SDD provides a detailed description of the theory behind the code, and the implementation of that theory. It is essential for anyone who is attempting to review or modify the code or who otherwise needs to understand the internal workings of the code. In addition, this document includes, in Appendix A, the System Requirements Specification for the TMAD System.

  13. Florida Educational Facilities, 1996.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Office of Educational Facilities.

    This document contains information, photographs, and floor plans of many of Florida's new elementary through high school facilities occupied in 1996. Each entry lists the facility's type, building size, student capacity, and general structural information. Also provided is information on the facility's total construction cost; the architects and…

  14. Florida Educational Facilities, 1997.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Office of Educational Facilities.

    This document contains information, photographs, and floor plans of many of Florida's new elementary through high school facilities occupied in 1997. Each entry lists the facility's type, building size, student capacity, and general structural information. Also provided is information on the facility's total construction cost; the architects and…

  15. Florida Educational Facilities, 1998.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Office of Educational Facilities.

    This document contains information, photographs, and floor plans of many of Florida's new elementary through high school facilities occupied in 1998. Each entry lists the facility's type, building size, student capacity, and general structural information. Also provided is information on the facility's total construction cost; the architects and…

  16. RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    KOZLOWSKI, S.D.

    2007-05-30

    This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditionsmore » for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below.« less

  17. Arts Education Facilities Planner for Grades 9-12.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of School Support.

    This document suggests facilities necessary to conduct instruction in arts programs in grades 9-12 and conveys essential features that should be present. As a reference document for school facilities designers, it describes arts education programs and the facilities that support them, with some sections focusing on the concepts and features common…

  18. Characterization of 618-11 solid waste burial ground, disposed waste, and description of the waste generating facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hladek, K.L.

    1997-10-07

    The 618-11 (Wye or 318-11) burial ground received transuranic (TRTJ) and mixed fission solid waste from March 9, 1962, through October 2, 1962. It was then closed for 11 months so additional burial facilities could be added. The burial ground was reopened on September 16, 1963, and continued operating until it was closed permanently on December 31, 1967. The burial ground received wastes from all of the 300 Area radioactive material handling facilities. The purpose of this document is to characterize the 618-11 solid waste burial ground by describing the site, burial practices, the disposed wastes, and the waste generatingmore » facilities. This document provides information showing that kilogram quantities of plutonium were disposed to the drum storage units and caissons, making them transuranic (TRU). Also, kilogram quantities of plutonium and other TRU wastes were disposed to the three trenches, which were previously thought to contain non-TRU wastes. The site burial facilities (trenches, caissons, and drum storage units) should be classified as TRU and the site plutonium inventory maintained at five kilograms. Other fissile wastes were also disposed to the site. Additionally, thousands of curies of mixed fission products were also disposed to the trenches, caissons, and drum storage units. Most of the fission products have decayed over several half-lives, and are at more tolerable levels. Of greater concern, because of their release potential, are TRU radionuclides, Pu-238, Pu-240, and Np-237. TRU radionuclides also included slightly enriched 0.95 and 1.25% U-231 from N-Reactor fuel, which add to the fissile content. The 618-11 burial ground is located approximately 100 meters due west of Washington Nuclear Plant No. 2. The burial ground consists of three trenches, approximately 900 feet long, 25 feet deep, and 50 feet wide, running east-west. The trenches constitute 75% of the site area. There are 50 drum storage units (five 55-gallon steel drums welded

  19. Solid Waste Program technical baseline description

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Carlson, A.B.

    1994-07-01

    The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

  20. Thermionic system evaluated test (TSET) facility description

    NASA Astrophysics Data System (ADS)

    Fairchild, Jerry F.; Koonmen, James P.; Thome, Frank V.

    1992-01-01

    A consortium of US agencies are involved in the Thermionic System Evaluation Test (TSET) which is being supported by the Strategic Defense Initiative Organization (SDIO). The project is a ground test of an unfueled Soviet TOPAZ-II in-core thermionic space reactor powered by electrical heat. It is part of the United States' national thermionic space nuclear power program. It will be tested in Albuquerque, New Mexico at the New Mexico Engineering Research Institute complex by the Phillips Laboratoty, Sandia National Laboratories, Los Alamos National Laboratory, and the University of New Mexico. One of TSET's many objectives is to demonstrate that the US can operate and test a complete space nuclear power system, in the electrical heater configuration, at a low cost. Great efforts have been made to help reduce facility costs during the first phase of this project. These costs include structural, mechanical, and electrical modifications to the existing facility as well as the installation of additional emergency systems to mitigate the effects of utility power losses and alkali metal fires.

  1. Medical emergencies on board commercial airlines: is documentation as expected?

    PubMed Central

    2012-01-01

    Introduction The purpose of this study was to perform a descriptive, content-based analysis on the different forms of documentation for in-flight medical emergencies that are currently provided in the emergency medical kits on board commercial airlines. Methods Passenger airlines in the World Airline Directory were contacted between March and May 2011. For each participating airline, sample in-flight medical emergency documentation forms were obtained. All items in the sample documentation forms were subjected to a descriptive analysis and compared to a sample "medical incident report" form published by the International Air Transport Association (IATA). Results A total of 1,318 airlines were contacted. Ten airlines agreed to participate in the study and provided a copy of their documentation forms. A descriptive analysis revealed a total of 199 different items, which were summarized into five sub-categories: non-medical data (63), signs and symptoms (68), diagnosis (26), treatment (22) and outcome (20). Conclusions The data in this study illustrate a large variation in the documentation of in-flight medical emergencies by different airlines. A higher degree of standardization is preferable to increase the data quality in epidemiologic aeromedical research in the future. PMID:22397530

  2. 2013 RFP Ports Initiative Supporting Documents

    EPA Pesticide Factsheets

    Documents include: RFPs, Project Narrative, Application fleet description (AFD), Priority County List, Model years for eligible nonroad engines (nonroad remaining useful life), Sample Drayage, Marince Engine Eligibility, FAQs, and Webinar slides

  3. 2014 RFP Ports Initiative Supporting Documents

    EPA Pesticide Factsheets

    Documents include: RFPs, Project Narrative, Application fleet description (AFD), Priority County List, Model years for eligible nonroad engines (nonroad remaining useful life), Sample Drayage, Marince Engine Eligibility, FAQs, and Webinar slides

  4. Studies of Transgenic Mosquitoes in Disease-Endemic Countries: Preparation of Containment Facilities

    PubMed Central

    Mutunga, James Mutuku; Diabaté, Abdoulaye; Namountougou, Moussa; Coulibaly, Mamadou B.; Sylla, Lakamy; Kayondo, Jonathan; Balyesima, Victor; Clark, Lorna; Benedict, Mark Q.; Raymond, Peter

    2018-01-01

    Abstract Novel approaches to area-wide control of vector species offer promise as additional tools in the fight against vectored diseases. Evaluation of transgenic insect strains aimed at field population control in disease-endemic countries may involve international partnerships and should be done in a stepwise approach, starting with studies in containment facilities. The preparations of both new-build and renovated facilities are described, including working with local and national regulations regarding land use, construction, and biosafety requirements, as well as international guidance to fill any gaps in regulation. The examples given are for containment categorization at Arthropod Containment Level 2 for initial facility design, classification of wastes, and precautions during shipping. Specific lessons were derived from preparations to evaluate transgenic (non-gene drive) mosquitoes in West and East African countries. Documented procedures and the use of a non-transgenic training strain for trial shipments and culturing were used to develop competence and confidence among the African facility staff, and along the chain of custody for transport. This practical description is offered to support other research consortia or institutions preparing containment facilities and operating procedures in conditions where research on transgenic insects is at an early stage. PMID:29337662

  5. Studies of Transgenic Mosquitoes in Disease-Endemic Countries: Preparation of Containment Facilities.

    PubMed

    Quinlan, M Megan; Mutunga, James Mutuku; Diabaté, Abdoulaye; Namountougou, Moussa; Coulibaly, Mamadou B; Sylla, Lakamy; Kayondo, Jonathan; Balyesima, Victor; Clark, Lorna; Benedict, Mark Q; Raymond, Peter

    2018-01-01

    Novel approaches to area-wide control of vector species offer promise as additional tools in the fight against vectored diseases. Evaluation of transgenic insect strains aimed at field population control in disease-endemic countries may involve international partnerships and should be done in a stepwise approach, starting with studies in containment facilities. The preparations of both new-build and renovated facilities are described, including working with local and national regulations regarding land use, construction, and biosafety requirements, as well as international guidance to fill any gaps in regulation. The examples given are for containment categorization at Arthropod Containment Level 2 for initial facility design, classification of wastes, and precautions during shipping. Specific lessons were derived from preparations to evaluate transgenic (non-gene drive) mosquitoes in West and East African countries. Documented procedures and the use of a non-transgenic training strain for trial shipments and culturing were used to develop competence and confidence among the African facility staff, and along the chain of custody for transport. This practical description is offered to support other research consortia or institutions preparing containment facilities and operating procedures in conditions where research on transgenic insects is at an early stage.

  6. Gaia DR2 documentation Chapter 6: Spectroscopy

    NASA Astrophysics Data System (ADS)

    Sartoretti, P.; Blomme, R.; David, M.; Seabroke, G.

    2018-04-01

    This chapter of the Gaia DR2 documentation describes the processing and validation of the Radial Velocity Spectrometer (RVS) data. A more detailed description of the processing is provided in Sartoretti et al. (2018) and of the validation in Katz et al. (2018). A description of the RVS instrument is provided in Cropper et al. (2018).

  7. 15 CFR 716.6 - Facility agreements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 2 2011-01-01 2011-01-01 false Facility agreements. 716.6 Section 716... ROUTINE INSPECTIONS OF DECLARED FACILITIES § 716.6 Facility agreements. (a) Description and requirements. A facility agreement is a site-specific agreement between the U.S. Government and the OPCW. Its...

  8. 15 CFR 716.6 - Facility agreements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 2 2013-01-01 2013-01-01 false Facility agreements. 716.6 Section 716... ROUTINE INSPECTIONS OF DECLARED FACILITIES § 716.6 Facility agreements. (a) Description and requirements. A facility agreement is a site-specific agreement between the U.S. Government and the OPCW. Its...

  9. Review of Selected Documents Related to Flooding at City of Salisbury Facilities on the Yadkin River Upstream from High Rock Dam, North Carolina, September 2007

    USGS Publications Warehouse

    Bales, Jerad D.

    2007-01-01

    This report documents a review of the hydraulic and sediment-transport models developed by the City of Salisbury, Alcoa Power Generating, Inc., and the Federal Energy Regulatory Commission to address issues of flooding and sedimentation in the vicinity of Salisbury's water-supply intake 19.4 miles upstream from High Rock Dam. The objective of the review was to determine if the modeling results submitted by Salisbury clearly demonstrate that the presence of High Rock Dam has led to an increase in water levels at Salisbury facilities or, conversely, if the documents of Alcoa Power Generating, Inc., demonstrate that High Rock Dam has not had an effect on water levels at Salisbury facilities. No new data were collected as a part of the review, and the models developed by involved parties were not tested during the review. Some historical discharge-measurement notes and previously published reports were checked as part of the review. The one-dimensional hydraulic modeling results submitted by Alcoa Power Generating, Inc., did not assess the effects of changes in bathymetry on changes in flood levels at Salisbury's facilities because pre-impoundment conditions were not simulated. Hydraulic modeling performed by consultants for the City of Salisbury seems to indicate that both the presence of the dam in the absence of any post-impoundment sedimentation and changes in bathymetry between pre-impoundment and 1997 conditions have resulted in increased water levels relative to pre-impoundment conditions at Salisbury facilities on the Yadkin River for a fairly wide range of flows. The degree to which the dam and the changes in bathymetry have affected flood levels at the Salisbury facilities relative to pre-impoundment conditions is open to discussion because of uncertainty in topographic/bathymetric data and the absence of calibration and sensitivity testing of the hydraulic models. None of the three hydraulic models appears to have been calibrated to or tested against

  10. Gaia DR2 documentation Chapter 8: Astrophysical Parameters

    NASA Astrophysics Data System (ADS)

    Manteiga, M.; Andrae, R.; Fouesneau, M.; Creevey, O.; Ordenovic, C.; Mary, N.; Jean-Antoine-Piccolo, A.; Bailer-Jones, C. A. L.

    2018-04-01

    This chapter of the Gaia DR2 documentation describes Apsis, the Astrophysical Parameters Inference System used for processing Gaia DR2 data. Beyond this documentation, a complete description of the processing and the results, as well as additional validations, have been published in Andrae et al. (2018).

  11. NASA visual thesaurus maintenance documentation

    NASA Technical Reports Server (NTRS)

    1989-01-01

    The following document is presented in six sections: (1) introduction; (2) a diagram showing how the various routines are grouped together into functional modules; (3) a printout of all the layouts in the system along with their associated layout procedures; (4) listings of all the global procedures in the system; (5) a cross-reference of all identifiers used in the system; and (6) descriptions of the external procedures used in the system. The document was prepared at the Project ICON Image Scaling Laboratory.

  12. Description of the Spacecraft Control Laboratory Experiment (SCOLE) facility

    NASA Technical Reports Server (NTRS)

    Williams, Jeffrey P.; Rallo, Rosemary A.

    1987-01-01

    A laboratory facility for the study of control laws for large flexible spacecraft is described. The facility fulfills the requirements of the Spacecraft Control Laboratory Experiment (SCOLE) design challenge for a laboratory experiment, which will allow slew maneuvers and pointing operations. The structural apparatus is described in detail sufficient for modelling purposes. The sensor and actuator types and characteristics are described so that identification and control algorithms may be designed. The control implementation computer and real-time subroutines are also described.

  13. Description of the Spacecraft Control Laboratory Experiment (SCOLE) facility

    NASA Technical Reports Server (NTRS)

    Williams, Jeffrey P.; Rallo, Rosemary A.

    1987-01-01

    A laboratory facility for the study of control laws for large flexible spacecraft is described. The facility fulfills the requirements of the Spacecraft Control Laboratory Experiment (SCOLE) design challenge for laboratory experiments, which will allow slew maneuvers and pointing operations. The structural apparatus is described in detail sufficient for modelling purposes. The sensor and actuator types and characteristics are described so that identification and control algorithms may be designed. The control implementation computer and real-time subroutines are also described.

  14. Photovoltaic Systems Test Facilities: Existing capabilities compilation

    NASA Technical Reports Server (NTRS)

    Volkmer, K.

    1982-01-01

    A general description of photovoltaic systems test facilities (PV-STFs) operated under the U.S. Department of Energy's photovoltaics program is given. Descriptions of a number of privately operated facilities having test capabilities appropriate to photovoltaic hardware development are given. A summary of specific, representative test capabilities at the system and subsystem level is presented for each listed facility. The range of system and subsystem test capabilities available to serve the needs of both the photovoltaics program and the private sector photovoltaics industry is given.

  15. Open-source framework for documentation of scientific software written on MATLAB-compatible programming languages

    NASA Astrophysics Data System (ADS)

    Konnik, Mikhail V.; Welsh, James

    2012-09-01

    Numerical simulators for adaptive optics systems have become an essential tool for the research and development of the future advanced astronomical instruments. However, growing software code of the numerical simulator makes it difficult to continue to support the code itself. The problem of adequate documentation of the astronomical software for adaptive optics simulators may complicate the development since the documentation must contain up-to-date schemes and mathematical descriptions implemented in the software code. Although most modern programming environments like MATLAB or Octave have in-built documentation abilities, they are often insufficient for the description of a typical adaptive optics simulator code. This paper describes a general cross-platform framework for the documentation of scientific software using open-source tools such as LATEX, mercurial, Doxygen, and Perl. Using the Perl script that translates M-files MATLAB comments into C-like, one can use Doxygen to generate and update the documentation for the scientific source code. The documentation generated by this framework contains the current code description with mathematical formulas, images, and bibliographical references. A detailed description of the framework components is presented as well as the guidelines for the framework deployment. Examples of the code documentation for the scripts and functions of a MATLAB-based adaptive optics simulator are provided.

  16. AgRISTARS: Foreign Commodity production forecasting. Project procedures designation and description document, volume 1

    NASA Technical Reports Server (NTRS)

    Waggoner, J. T.; Phinney, D. E. (Principal Investigator)

    1981-01-01

    The crop estimation analysis procedures documentation of the AgRISTARS - Foreign Commodity Production Forecasting Project (FCPF) is presented. Specifically it includes the technical/management documentation of the remote sensing data analysis procedures prepared in accordance with the guidelines provided in the FCPF communication/documentation standards manual. Standard documentation sets are given arranged by procedural type and level then by crop types or other technically differentiating categories.

  17. Astronomic Telescope Facility: Preliminary systems definition study report. Volume 2: Technical description

    NASA Technical Reports Server (NTRS)

    Sobeck, Charlie (Editor)

    1987-01-01

    The Astrometric Telescope Facility (AFT) is to be an earth-orbiting facility designed specifically to measure the change in relative position of stars. The primary science investigation for the facility will be the search for planets and planetary systems outside the solar system. In addition the facility will support astrophysics investigations dealing with the location or motions of stars. The science objective and facility capabilities for astrophysics investigations are discussed.

  18. Automatic document classification of biological literature

    PubMed Central

    Chen, David; Müller, Hans-Michael; Sternberg, Paul W

    2006-01-01

    Background Document classification is a wide-spread problem with many applications, from organizing search engine snippets to spam filtering. We previously described Textpresso, a text-mining system for biological literature, which marks up full text according to a shallow ontology that includes terms of biological interest. This project investigates document classification in the context of biological literature, making use of the Textpresso markup of a corpus of Caenorhabditis elegans literature. Results We present a two-step text categorization algorithm to classify a corpus of C. elegans papers. Our classification method first uses a support vector machine-trained classifier, followed by a novel, phrase-based clustering algorithm. This clustering step autonomously creates cluster labels that are descriptive and understandable by humans. This clustering engine performed better on a standard test-set (Reuters 21578) compared to previously published results (F-value of 0.55 vs. 0.49), while producing cluster descriptions that appear more useful. A web interface allows researchers to quickly navigate through the hierarchy and look for documents that belong to a specific concept. Conclusion We have demonstrated a simple method to classify biological documents that embodies an improvement over current methods. While the classification results are currently optimized for Caenorhabditis elegans papers by human-created rules, the classification engine can be adapted to different types of documents. We have demonstrated this by presenting a web interface that allows researchers to quickly navigate through the hierarchy and look for documents that belong to a specific concept. PMID:16893465

  19. Issues and solutions for storage, retrieval, and searching of MPEG-7 documents

    NASA Astrophysics Data System (ADS)

    Chang, Yuan-Chi; Lo, Ming-Ling; Smith, John R.

    2000-10-01

    The ongoing MPEG-7 standardization activity aims at creating a standard for describing multimedia content in order to facilitate the interpretation of the associated information content. Attempting to address a broad range of applications, MPEG-7 has defined a flexible framework consisting of Descriptors, Description Schemes, and Description Definition Language. Descriptors and Description Schemes describe features, structure and semantics of multimedia objects. They are written in the Description Definition Language (DDL). In the most recent revision, DDL applies XML (Extensible Markup Language) Schema with MPEG-7 extensions. DDL has constructs that support inclusion, inheritance, reference, enumeration, choice, sequence, and abstract type of Description Schemes and Descriptors. In order to enable multimedia systems to use MPEG-7, a number of important problems in storing, retrieving and searching MPEG-7 documents need to be solved. This paper reports on initial finding on issues and solutions of storing and accessing MPEG-7 documents. In particular, we discuss the benefits of using a virtual document management framework based on XML Access Server (XAS) in order to bridge the MPEG-7 multimedia applications and database systems. The need arises partly because MPEG-7 descriptions need customized storage schema, indexing and search engines. We also discuss issues arising in managing dependence and cross-description scheme search.

  20. Evapotranspiration information reporting: II. Recommended documentation

    USDA-ARS?s Scientific Manuscript database

    Researchers and journal authors, reviewers, and readers can benefit from more complete documentation of published evapotranspiration (ET) information, including a description of field procedures, instrumentation, data filtering, model parameterization, and site review. This information is important ...

  1. Wall finish selection in hospital design: a survey of facility managers.

    PubMed

    Lavy, Sarel; Dixit, Manish K

    2012-01-01

    This paper seeks to analyze healthcare facility managers' perceptions regarding the materials used for interior wall finishes and the criteria used to select them. It also examines differences in wall finish materials and the selection process in three major hospital spaces: emergency, surgery, and in-patient units. These findings are compared with healthcare designers' perceptions on similar issues, as currently documented in the literature. Hospital design and the materials used for hospital construction have a considerable effect on the environment and health of patients. A 2002 survey revealed which characteristics healthcare facility designers consider when selecting materials for healthcare facilities; however, no similar study has examined the views of facility managers on building finish selection. A 22-question survey questionnaire was distributed to 210 facility managers of metropolitan, for-profit hospitals in Texas; IRB approval was obtained. Respondents were asked to rank 10 interior wall finish materials and 11 selection criteria for wall finishes. Data from 48 complete questionnaires were analyzed using descriptive statistics and nonparametric statistical analysis methods. The study found no statistically significant differences in terms of wall finish materials or the characteristics for material selection in the three major spaces studied. It identified facility managers' four most-preferred wall finish materials and the five-most preferred characteristics, with a statistical confidence level of greater than 95%. The paper underscores the importance of incorporating all perspectives: facility designers and facility managers should work together toward achieving common organizational goals.

  2. Tobacco document research reporting

    PubMed Central

    Carter, S

    2005-01-01

    Design: Interpretive analysis of published research. Sample: 173 papers indexed in Medline between 1995 and 2004 that cited tobacco industry documents. Analysis: Information about year published, journal and author, and a set of codes relating to methods reporting, were managed in N*Vivo. This coding formed the basis of an interpretation of tobacco document research reporting. Results: Two types of papers were identified. The first used tobacco documents as the primary data source (A-papers). The second was dedicated to another purpose but cited a small number of documents (B-papers). In B-papers documents were used either to provide a specific example or to support an expansive contention. A-papers contained information about purpose, sources, searching, analysis, and limitations that differed by author and journal and over time. A-papers had no clear methodological context, but used words from three major traditions—interpretive research, positivist research, and history—to describe analysis. Interpretation: A descriptive mainstream form of tobacco document reporting is proposed, initially typical but decreasing, and a continuum of positioning of the researcher, from conduit to constructor. Reporting practices, particularly from experienced researchers, appeared to evolve towards researcher as constructor, with later papers showing more complex purposes, diverse sources, and detail of searching and analysis. Tobacco document research could learn from existing research traditions: a model for planning and evaluating tobacco document research is presented. PMID:16319359

  3. Facilities maintenance handbook

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This handbook is a guide for facilities maintenance managers. Its objective is to set minimum facilities maintenance standards. It also provides recommendations on how to meet the standards to ensure that NASA maintains its facilities in a manner that protects and preserves its investment in the facilities in a cost-effective manner while safely and efficiently performing its mission. This handbook implements NMI 8831.1, which states NASA facilities maintenance policy and assigns organizational responsibilities for the management of facilities maintenance activities on all properties under NASA jurisdiction. It is a reference for facilities maintenance managers, not a step-by-step procedural manual. Because of the differences in NASA Field Installation organizations, this handbook does not assume or recommend a typical facilities maintenance organization. Instead, it uses a systems approach to describe the functions that should be included in any facilities maintenance management system, regardless of its organizational structure. For documents referenced in the handbook, the most recent version of the documents is applicable. This handbook is divided into three parts: Part 1 specifies common definitions and facilities maintenance requirements and amplifies the policy requirements contained in NMI 8831. 1; Part 2 provides guidance on how to meet the requirements of Part 1, containing recommendations only; Part 3 contains general facilities maintenance information. One objective of this handbook is to fix commonality of facilities maintenance definitions among the Centers. This will permit the application of uniform measures of facilities conditions, of the relationship between current replacement value and maintenance resources required, and of the backlog of deferred facilities maintenance. The utilization of facilities maintenance system functions will allow the Centers to quantitatively define maintenance objectives in common terms, prepare work plans, and

  4. 75 FR 18872 - Ginnie Mae Multiclass Securities Program Documents

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-13

    ... Securities Program Documents AGENCY: Office of the Chief Information Officer, HUD. ACTION: Notice. SUMMARY... with the Multiclass Securities Program. The intent of the Multiclass Securities program is to increase... Securities Program Documents. OMB Approval Number: 2503-0030. Form Numbers: None. Description of the Need for...

  5. WASTE TREATMENT BUILDING SYSTEM DESCRIPTION DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    F. Habashi

    2000-06-22

    The Waste Treatment Building System provides the space, layout, structures, and embedded subsystems that support the processing of low-level liquid and solid radioactive waste generated within the Monitored Geologic Repository (MGR). The activities conducted in the Waste Treatment Building include sorting, volume reduction, and packaging of dry waste, and collecting, processing, solidification, and packaging of liquid waste. The Waste Treatment Building System is located on the surface within the protected area of the MGR. The Waste Treatment Building System helps maintain a suitable environment for the waste processing and protects the systems within the Waste Treatment Building (WTB) from mostmore » of the natural and induced environments. The WTB also confines contaminants and provides radiological protection to personnel. In addition to the waste processing operations, the Waste Treatment Building System provides space and layout for staging of packaged waste for shipment, industrial and radiological safety systems, control and monitoring of operations, safeguards and security systems, and fire protection, ventilation and utilities systems. The Waste Treatment Building System also provides the required space and layout for maintenance activities, tool storage, and administrative facilities. The Waste Treatment Building System integrates waste processing systems within its protective structure to support the throughput rates established for the MGR. The Waste Treatment Building System also provides shielding, layout, and other design features to help limit personnel radiation exposures to levels which are as low as is reasonably achievable (ALARA). The Waste Treatment Building System interfaces with the Site Generated Radiological Waste Handling System, and with other MGR systems that support the waste processing operations. The Waste Treatment Building System interfaces with the General Site Transportation System, Site Communications System, Site Water System

  6. IDC System Specification Document Version 1.1.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harris, James M.; Lober, Randall R.

    2015-02-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  7. A model for enhancing Internet medical document retrieval with "medical core metadata".

    PubMed

    Malet, G; Munoz, F; Appleyard, R; Hersh, W

    1999-01-01

    Finding documents on the World Wide Web relevant to a specific medical information need can be difficult. The goal of this work is to define a set of document content description tags, or metadata encodings, that can be used to promote disciplined search access to Internet medical documents. The authors based their approach on a proposed metadata standard, the Dublin Core Metadata Element Set, which has recently been submitted to the Internet Engineering Task Force. Their model also incorporates the National Library of Medicine's Medical Subject Headings (MeSH) vocabulary and MEDLINE-type content descriptions. The model defines a medical core metadata set that can be used to describe the metadata for a wide variety of Internet documents. The authors propose that their medical core metadata set be used to assign metadata to medical documents to facilitate document retrieval by Internet search engines.

  8. Description and Documentation of the Dental School Dental Delivery System.

    ERIC Educational Resources Information Center

    Chase, Rosen and Wallace, Inc., Alexandria, VA.

    A study was undertaken to describe and document the dental school dental delivery system using an integrated systems approach. In late 1976 and early 1977, a team of systems analysts and dental consultants visited three dental schools to observe the delivery of dental services and patient flow and to interview administrative staff and faculty.…

  9. Experimental uncertainty and drag measurements in the national transonic facility

    NASA Technical Reports Server (NTRS)

    Batill, Stephen M.

    1994-01-01

    This report documents the results of a study which was conducted in order to establish a framework for the quantitative description of the uncertainty in measurements conducted in the National Transonic Facility (NTF). The importance of uncertainty analysis in both experiment planning and reporting results has grown significantly in the past few years. Various methodologies have been proposed and the engineering community appears to be 'converging' on certain accepted practices. The practical application of these methods to the complex wind tunnel testing environment at the NASA Langley Research Center was based upon terminology and methods established in the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME) standards. The report overviews this methodology.

  10. CRAC2 model description

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions.

  11. Measuring and documenting truck activity times at international border crossings.

    DOT National Transportation Integrated Search

    2014-04-01

    Documenting the times trucks incur when crossing an international border facility is : valuable both to the private freight industry and to gateway facility operators and planners. : Members of the project team previously developed and implemented an...

  12. Job Analysis and the Preparation of Job Descriptions. Mendip Papers MP 037.

    ERIC Educational Resources Information Center

    Saunders, Bob

    This document provides guidelines for conducting job analyses and writing job descriptions. It covers the following topics: the rationale for job descriptions, the terminology of job descriptions, who should write job descriptions, getting the information to write job descriptions, preparing for staff interviews, conducting interviews, writing the…

  13. Computer Description of Black Hawk Helicopter

    DTIC Science & Technology

    1979-06-01

    Model Combinatorial Geometry Models Black Hawk Helicopter Helicopter GIFT Computer Code Geometric Description of Targets 20. ABSTRACT...description was made using the technique of combinatorial geometry (COM-GEOM) and will be used as input to the GIFT computer code which generates Tliic...rnHp The data used bv the COVART comtmter code was eenerated bv the Geometric Information for Targets ( GIFT )Z computer code. This report documents

  14. APPA's New Operational Guidelines for Educational Facilities

    ERIC Educational Resources Information Center

    Bigger, Alan S.

    2011-01-01

    Nearly 25 years ago a group of APPA members and facilities managers started to discuss an idea and to plant a seed about the need for a document, or series of documents, that would explain the need for staffing facilities operations and the implication of such staffing on levels of service. As the demand for increased budget cuts reached seismic…

  15. Sigma 2 Graphic Display Software Program Description

    NASA Technical Reports Server (NTRS)

    Johnson, B. T.

    1973-01-01

    A general purpose, user oriented graphic support package was implemented. A comprehensive description of the two software components comprising this package is given: Display Librarian and Display Controller. These programs have been implemented in FORTRAN on the XDS Sigma 2 Computer Facility. This facility consists of an XDS Sigma 2 general purpose computer coupled to a Computek Display Terminal.

  16. State Requirements for Educational Facilities, 1997.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Office of Educational Facilities.

    This document updates Florida's deregulation of construction of educational facilities guidelines, while keeping as the primary focus the safety of the students in pre-K through community college facilities. Organized by the sequence of steps required in the facilities procurement process, it covers general definitions, property…

  17. Waste Isolation Pilot Plant (WIPP) conceptual design report. Part I: executive summary. Part II: facilities and system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1977-06-01

    The pilot plant is developed for ERDA low-level contact-handled transuranic waste, ERDA remote-handled intermediate-level transuranic waste, and for high-level waste experiments. All wastes placed in the WIPP arrive at the site processed and packaged; no waste processing is done at the WIPP. All wastes placed into the WIPP are retrievable. The proposed site for WIPP lies 26 miles east of Carlsbad, New Mexico. This document includes the executive summary and a detailed description of the facilities and systems. (DLC)

  18. Engineering directorate technical facilities catalog

    NASA Technical Reports Server (NTRS)

    Maloy, Joseph E.

    1993-01-01

    The Engineering Directorate Technical Facilities Catalog is designed to provide an overview of the technical facilities available within the Engineering Directorate at the National Aeronautics and Space Administration (NASA), Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The combined capabilities of these engineering facilities are essential elements of overall JSC capabilities required to manage and perform major NASA engineering programs. The facilities are grouped in the text by chapter according to the JSC division responsible for operation of the facility. This catalog updates the facility descriptions for the JSC Engineering Directorate Technical Facilities Catalog, JSC 19295 (August 1989), and supersedes the Engineering Directorate, Principle test and Development Facilities, JSC, 19962 (November 1984).

  19. 46 CFR 162.050-15 - Designation of facilities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    .... (2) Each type of equipment the facility proposes to test. (3) A description of the facility's... concentrations and the values obtained by the facility with their equipment. The value of X d for the 12... conduct approval tests— (1) A facility must have the management organization, equipment for conducting...

  20. SIRU development. Volume 3: Software description and program documentation

    NASA Technical Reports Server (NTRS)

    Oehrle, J.

    1973-01-01

    The development and initial evaluation of a strapdown inertial reference unit (SIRU) system are discussed. The SIRU configuration is a modular inertial subsystem with hardware and software features that achieve fault tolerant operational capabilities. The SIRU redundant hardware design is formulated about a six gyro and six accelerometer instrument module package. The six axes array provides redundant independent sensing and the symmetry enables the formulation of an optimal software redundant data processing structure with self-contained fault detection and isolation (FDI) capabilities. The basic SIRU software coding system used in the DDP-516 computer is documented.

  1. Environmental effects of dredging. Documentation of the settle module for ADDAMS: Design of confined disposal facilities for solids retention and initial storage. Technical notes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hayes, D.F.; Schroeder, P.R.

    This technical note documents the SETTLE computer program which facilitates the design of a confined disposal facility (CDF) to retain solids, provide initial storage, and meet effluent discharge limitations for suspended solids during a dredged matenal disposal operation. Detailed information can be found in Engineer Manual 1110-2-5027, Confined Dredged Material Disposal. SETTLE is a part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  2. Capsule review of the DOE research and development and field facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1980-09-01

    A description is given of the roles of DOE's headquarters, field offices, major multiprogram laboratories, Energy Technology and Mining Technology Centers, and other government-owned, contractor-operated facilities, which are located in all regions of the US. Descriptions of DOE facilities are given for multiprogram laboratories (12); program-dedicated facilities (biomedical and environmental facilities-12, fossil energy facilities-7, fusion energy facility-1, nuclear development facilities-3, physical research facilities-4, safeguards facility-1, and solar facilities-2); and Production, Testing, and Fabrication Facilities (nuclear materials production facilities-5, weapon testing and fabrication complex-8). Three appendices list DOE field and project offices; DOE field facilities by state or territory, names, addresses,more » and telephone numbers; DOE R and D field facilities by type, contractor names, and names of directors. (MCW)« less

  3. Life sciences space station planning document: A reference payload for the exobiology research facilities

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The Cosmic Dust Collection and Gas Grain Simulation Facilities represent collaborative efforts between the Life Sciences and Solar System Exploration Divisions designed to strengthen a natural exobiology/Planetary Sciences connection. The Cosmic Dust Collection Facility is a Planetary Science facility, with Exobiology a primary user. Conversely, the Gas Grain Facility is an exobiology facility, with Planetary Science a primary user. Requirements for the construction and operation of the two facilities, contained herein, were developed through joint workshops between the two disciplines, as were representative experiments comprising the reference payloads. In the case of the Gas Grain Simulation Facility, the astrophysics Division is an additional potential user, having participated in the workshop to select experiments and define requirements.

  4. TFaNS Tone Fan Noise Design/Prediction System. Volume 1; System Description, CUP3D Technical Documentation and Manual for Code Developers

    NASA Technical Reports Server (NTRS)

    Topol, David A.

    1999-01-01

    TFaNS is the Tone Fan Noise Design/Prediction System developed by Pratt & Whitney under contract to NASA Lewis (presently NASA Glenn). The purpose of this system is to predict tone noise emanating from a fan stage including the effects of reflection and transmission by the rotor and stator and by the duct inlet and nozzle. These effects have been added to an existing annular duct/isolated stator noise prediction capability. TFaNS consists of: The codes that compute the acoustic properties (reflection and transmission coefficients) of the various elements and write them to files. Cup3D: Fan Noise Coupling Code that reads these files, solves the coupling problem, and outputs the desired noise predictions. AWAKEN: CFD/Measured Wake Postprocessor which reformats CFD wake predictions and/or measured wake data so it can be used by the system. This volume of the report provides technical background for TFaNS including the organization of the system and CUP3D technical documentation. This document also provides information for code developers who must write Acoustic Property Files in the CUP3D format. This report is divided into three volumes: Volume I: System Description, CUP3D Technical Documentation, and Manual for Code Developers; Volume II: User's Manual, TFaNS Vers. 1.4; Volume III: Evaluation of System Codes.

  5. Underwater Facilities Inspection and Assessment at Magnetic Silencing Facility, Naval Submarine Base, Trident Support Site, Bangor, Washington.

    DTIC Science & Technology

    1980-10-01

    failure was noted in any other area of the facility. :’.. - . - ..- UNDERWATER FACILITI ES INSPECTION AND ASSESSMENT AT S- MAGNETIC SILENCING FACILITY...piling were found to be in excellent condition. No damage or failure was noted in any other * area of the facility. EXECUTIVE SUI’IARY TABLE U Piling...5-1 LEGEND TO TABLES. .... ........... ........ T-1 - -TABLE 1: REMAINING CROSS-SECTIONAL AREA AND DESCRIPTION OF DAMAGE TO

  6. Hypersexuality in nursing care facilities--a descriptive study.

    PubMed

    Nagaratnam, Nages; Gayagay, George

    2002-01-01

    The continuance of sexual expression in the elderly as age advances is well recognized. Sexual disinhibition, however, in a restricted environment such as in nursing care facilities has received scant attention. We wish to describe eight patients residing in nursing care facilities who were seen because of their problematic sexually related behaviors. These behaviors include cuddling, touching of the genitals, sexual remarks propositioning, grabbing and groping, use of obscene language and masturbating without shame. In all instances concern emanated from members of the nursing staff. Other associated behaviors included aggression, agitation, and irritability amongst others. The computed tomography (CT) scan of the brain showed infarction in the frontal lobe (4), parietal lobe (1), and the caudate (1). One had severe Parkinson's Disease and one had severe dementia of the Alzheimer's disease. All ten patients had an organic basis for their symptoms. Sexually inappropriate behaviors remain highly controversial and labeling them as 'diseased' or an 'illness' may have enormous individual, cultural and medico-legal implications. The clinico-anatomical correlation are discussed.

  7. C-431 B -- Scope document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hollister, H.L.

    1951-06-01

    This document describes the scope of the C-431-B Reactor Production Facility. In dealing with the broad phases of the project, it includes the Sections ``A`` (Scope Modifications) of the approved Design Criteria, modified to ensure correctness to date. Location of the facility has been set as shown on the site map in HDC-2101, designated site number one. Included in Project C-431-B are the 105-C Building, including within that building facilities previously located in the 1608 Building, a contaminated effluent crib adjacent to 105-C, and gas facilities using the 115-B Building interconnected with 105-C. Also included are an oil shed, amore » thimble storage cave, a badge house, and an exclusion fence. Building services and process lines will be considered part of the project to a location nominally five feet outside of 105-C.« less

  8. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Waste Disposal Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ansley, Shannon Leigh

    2002-02-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering andmore » Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.« less

  9. Space Documentation Services: Operations Handbook.

    ERIC Educational Resources Information Center

    Raitt, D. I.

    A description of the system used by Space Documentation Service (SDS) to disseminate combined and accumulated knowledge, as widely as possible, throughout Europe is given. The RECON network, with the full support of NASA, has gradually been extended so that centers in Member States, may, by installing their own terminals, have direct access to the…

  10. Stone Quarrying, Crushing and Screening Facilities General Air Quality Permit Request for Coverage: US Silica - Parshall Transload Facility

    EPA Pesticide Factsheets

    Documents related to Request for Coverage under Stone Quarrying, Crushing, and Screening Facilities General Permit Indian Reservation, US Silica, Parshall Transload Facility, Fort Berthold Indian Reservation, North Dakota.

  11. Information security management system planning for CBRN facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lenaeu, Joseph D.; O'Neil, Lori Ross; Leitch, Rosalyn M.

    The focus of this document is to provide guidance for the development of information security management system planning documents at chemical, biological, radiological, or nuclear (CBRN) facilities. It describes a risk-based approach for planning information security programs based on the sensitivity of the data developed, processed, communicated, and stored on facility information systems.

  12. Views on computer program documentation and automation

    NASA Technical Reports Server (NTRS)

    Grosch, H. R.

    1970-01-01

    Various aspects of the problem of program documentation and description are discussed. Particular emphasis is placed on the problem of semantics. It is pointed out that the information produced by documentation of a program, if presented to several different groups, may mean entirely different things to these groups. Recognition of the fact that people look at problems differently is proposed as a more practical approach to the problem of documentation rather than extensive use of standards or strict formatting. The difficulties involved in searching for ways to provide a common ground for the transmission and use of information are discussed.

  13. Single-channel voice-response-system program documentation volume I : system description

    DOT National Transportation Integrated Search

    1977-01-01

    This report documents the design and implementation of a Voice Response System (VRS) using Adaptive Differential Pulse Code Modulation (ADPCM) voice coding. Implemented on a Digital Equipment Corporation PDP-11/20,R this VRS system supports a single ...

  14. Oak Ridge Environmental Information System (OREIS) functional system design document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Birchfield, T.E.; Brown, M.O.; Coleman, P.R.

    1994-03-01

    The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less

  15. Cross-institutional document exchange system using clinical document architecture (CDA) with virtual printing method.

    PubMed

    Mihara, Naoki; Ueda, Kanayo; Manabe, Shirou; Takeda, Toshihiro; Shimai, Yoshie; Horishima, Hiroyuki; Murata, Taizo; Fujii, Ayumi; Matsumura, Yasushi

    2015-01-01

    Recently one patient received care from several hospitals at around the same time. When the patient visited a new hospital, the new hospital's physician tried to get patient information the previous hospital. Thus, patient information is frequently exchanged between them. Many types of healthcare facilities have implemented an electronic medical record system, but in Japan, healthcare information exchange is often done by paper. In other words, after a clinical doctor prints a referral document and sends it to another hospital's physician, another hospital's doctor receives it and scans to store the EMR in his own hospital's system. It is a wasteful way to exchange healthcare information about a patient. In order to solve this problem, we have developed a cross-institutional document exchange system using clinical document architecture (CDA) with a virtual printing method.

  16. Creating, documenting and sharing network models.

    PubMed

    Crook, Sharon M; Bednar, James A; Berger, Sandra; Cannon, Robert; Davison, Andrew P; Djurfeldt, Mikael; Eppler, Jochen; Kriener, Birgit; Furber, Steve; Graham, Bruce; Plesser, Hans E; Schwabe, Lars; Smith, Leslie; Steuber, Volker; van Albada, Sacha

    2012-01-01

    As computational neuroscience matures, many simulation environments are available that are useful for neuronal network modeling. However, methods for successfully documenting models for publication and for exchanging models and model components among these projects are still under development. Here we briefly review existing software and applications for network model creation, documentation and exchange. Then we discuss a few of the larger issues facing the field of computational neuroscience regarding network modeling and suggest solutions to some of these problems, concentrating in particular on standardized network model terminology, notation, and descriptions and explicit documentation of model scaling. We hope this will enable and encourage computational neuroscientists to share their models more systematically in the future.

  17. Information System Life-Cycle And Documentation Standards (SMAP DIDS)

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Although not computer program, SMAP DIDS written to provide systematic, NASA-wide structure for documenting information system development projects. Each DID (data item description) outlines document required for top-quality software development. When combined with management, assurance, and life cycle standards, Standards protect all parties who participate in design and operation of new information system.

  18. SITE GENERATED RADIOLOGICAL WASTE HANDLING SYSTEM DESCRIPTION DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    S. C. Khamankar

    2000-06-20

    The Site Generated Radiological Waste Handling System handles radioactive waste products that are generated at the geologic repository operations area. The waste is collected, treated if required, packaged for shipment, and shipped to a disposal site. Waste streams include low-level waste (LLW) in solid and liquid forms, as-well-as mixed waste that contains hazardous and radioactive constituents. Liquid LLW is segregated into two streams, non-recyclable and recyclable. The non-recyclable stream may contain detergents or other non-hazardous cleaning agents and is packaged for shipment. The recyclable stream is treated to recycle a large portion of the water while the remaining concentrated wastemore » is packaged for shipment; this greatly reduces the volume of waste requiring disposal. There will be no liquid LLW discharge. Solid LLW consists of wet solids such as ion exchange resins and filter cartridges, as-well-as dry active waste such as tools, protective clothing, and poly bags. Solids will be sorted, volume reduced, and packaged for shipment. The generation of mixed waste at the Monitored Geologic Repository (MGR) is not planned; however, if it does come into existence, it will be collected and packaged for disposal at its point of occurrence, temporarily staged, then shipped to government-approved off-site facilities for disposal. The Site Generated Radiological Waste Handling System has equipment located in both the Waste Treatment Building (WTB) and in the Waste Handling Building (WHB). All types of liquid and solid LLW are processed in the WTB, while wet solid waste from the Pool Water Treatment and Cooling System is packaged where received in the WHB. There is no installed hardware for mixed waste. The Site Generated Radiological Waste Handling System receives waste from locations where water is used for decontamination functions. In most cases the water is piped back to the WTB for processing. The WTB and WHB provide staging areas for storing and

  19. Nuclear facility decommissioning and site remedial actions: A selected bibliography, Vol. 18. Part 2. Indexes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1997-09-01

    This bibliography contains 3638 citations with abstracts of documents relevant to environmental restoration, nuclear facility decontamination and decommissioning (D&D), uranium mill tailings management, and site remedial actions. This report is the eighteenth in a series of bibliographies prepared annually for the U.S. Department of Energy (DOE) Office of Environmental Restoration. Citations to foreign and domestic literature of all types - technical reports, progress reports, journal articles, symposia proceedings, theses, books, patents, legislation, and research project descriptions - have been included in Part 1 of the report. The bibliography contains scientific, technical, financial, and regulatory information that pertains to DOE environmentalmore » restoration programs. The citations are separated by topic into 16 sections, including (1) DOE Environmental Restoration Program; (2) DOE D&D Program; (3) Nuclear Facilities Decommissioning; (4) DOE Formerly Utilized Sites Remedial Action Programs; (5) NORM-Contaminated Site Restoration; (6) DOE Uranium Mill Tailings Remedial Action Project; (7) Uranium Mill Tailings Management; (8) DOE Site-Wide Remedial Actions; (9) DOE Onsite Remedial Action Projects; (10) Contaminated Site Remedial Actions; (11) DOE Underground Storage Tank Remediation; (12) DOE Technology Development, Demonstration, and Evaluations; (13) Soil Remediation; (14) Groundwater Remediation; (15) Environmental Measurements, Analysis, and Decision-Making; and (16) Environmental Management Issues. Within the 16 sections, the citations are sorted by geographic location. If a geographic location is not specified, the citations are sorted according to the document title. In Part 2 of the report, indexes are provided for author, author affiliation, selected title phrase, selected title word, publication description, geographic location, and keyword.« less

  20. Assurance specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 4

    NASA Technical Reports Server (NTRS)

    Callender, E. David; Steinbacher, Jody

    1989-01-01

    This is the fourth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for assurance documentation for information systems and software, hardware, and operational procedures components, and related processes. The specifications are developed in conjunction with the corresponding management plans specifying the assurance activities to be performed.

  1. 28 CFR 20.23 - Documentation: Approval by OJARS.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

  2. 28 CFR 20.23 - Documentation: Approval by OJARS.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

  3. 28 CFR 20.23 - Documentation: Approval by OJARS.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

  4. 28 CFR 20.23 - Documentation: Approval by OJARS.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

  5. 28 CFR 20.23 - Documentation: Approval by OJARS.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...

  6. ADST, Version Description Document for the BDS-D M1 1.0.0

    DTIC Science & Technology

    1992-12-22

    1.1 date: 1992/10/01 23:32:59; author: crn-adst; state: Exp; Initial Version RCS file: ./common/include/cig- f /RCS/if...eh~eff.h,v Working file: if...libsrc/libfifo/RCS/ f -enqueue.c,v working file: f_enqueue.c head: 1.1 description: ITO - 6.6.1 baseline revision 1.1 date: 1992/10/01 23:43:13; author...crn-adst; state: Exp; Initial Version RCS file: ./common/libsrc/libfifo/RCS/ f -init.c,v working file: f -init.c head: 1.1 description: ITO - 6.6.1

  7. A Guide to the World's Training Facilities in Documentation and Information Work [Prepared by the] Central Institute for Scientific, Technical and Economic Information, Warsaw, Poland. Second Edition.

    ERIC Educational Resources Information Center

    Liebesny, Felix, Ed.; Ostrowska, Krystyna, Ed.

    This guide presents up-dated information, on a world-wide basis, on training facilities in documentation and information work. Only data relating to the formal training of documentalists, information workers and special librarians are included, except for those countries in which only short courses or seminars are available. Forty-seven countries…

  8. 10 CFR 75.10 - Facility information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... features of the facility relating to material accounting, containment, and surveillance; (4) A description of the existing and proposed procedures at the facility for nuclear material accounting and control, with special reference to material balance areas established by the licensee, measurement of flow, and...

  9. WASTE PACKAGE REMEDIATION SYSTEM DESCRIPTION DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    N.D. Sudan

    2000-06-22

    . The Waste Handling Building System houses the system, and provides the facility, safety, and auxiliary systems required to support operations. The system receives power from the Waste Handling Building Electrical System. The system also interfaces with the various DC systems.« less

  10. The TMIS life-cycle process document, revision A

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The Technical and Management Information System (TMIS) Life-Cycle Process Document describes the processes that shall be followed in the definition, design, development, test, deployment, and operation of all TMIS products and data base applications. This document is a roll out of TMIS Standards Document (SSP 30546). The purpose of this document is to define the life cycle methodology that the developers of all products and data base applications and any subsequent modifications shall follow. Included in this methodology are descriptions of the tasks, deliverables, reviews, and approvals that are required before a product or data base application is accepted in the TMIS environment.

  11. Information system life-cycle and documentation standards, volume 1

    NASA Technical Reports Server (NTRS)

    Callender, E. David; Steinbacher, Jody

    1989-01-01

    The Software Management and Assurance Program (SMAP) Information System Life-Cycle and Documentation Standards Document describes the Version 4 standard information system life-cycle in terms of processes, products, and reviews. The description of the products includes detailed documentation standards. The standards in this document set can be applied to the life-cycle, i.e., to each phase in the system's development, and to the documentation of all NASA information systems. This provides consistency across the agency as well as visibility into the completeness of the information recorded. An information system is software-intensive, but consists of any combination of software, hardware, and operational procedures required to process, store, or transmit data. This document defines a standard life-cycle model and content for associated documentation.

  12. Radioactive Liquid Waste Treatment Facility: Environmental Information Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Haagenstad, H.T.; Gonzales, G.; Suazo, I.L.

    1993-11-01

    At Los Alamos National Laboratory (LANL), the treatment of radioactive liquid waste is an integral function of the LANL mission: to assure U.S. military deterrence capability through nuclear weapons technology. As part of this mission, LANL conducts nuclear materials research and development (R&D) activities. These activities generate radioactive liquid waste that must be handled in a manner to ensure protection of workers, the public, and the environment. Radioactive liquid waste currently generated at LANL is treated at the Radioactive Liquid Waste Treatment Facility (RLWTF), located at Technical Area (TA)-50. The RLWTF is 30 years old and nearing the end ofmore » its useful design life. The facility was designed at a time when environmental requirements, as well as more effective treatment technologies, were not inherent in engineering design criteria. The evolution of engineering design criteria has resulted in the older technology becoming less effective in treating radioactive liquid wastestreams in accordance with current National Pollutant Discharge Elimination System (NPDES) and Department of Energy (DOE) regulatory requirements. Therefore, to support ongoing R&D programs pertinent to its mission, LANL is in need of capabilities to efficiently treat radioactive liquid waste onsite or to transport the waste off site for treatment and/or disposal. The purpose of the EID is to provide the technical baseline information for subsequent preparation of an Environmental Impact Statement (EIS) for the RLWTF. This EID addresses the proposed action and alternatives for meeting the purpose and need for agency action.« less

  13. Evoqua RCRA Permit Application and Draft Permit Documents

    EPA Pesticide Factsheets

    Documents pertaining to the proposed RCRA permit for the Evoqua Water Technologies LLC carbon regeneration facility located on the Colorado River Indian Tribes (CRIT) reservation near Parker, Arizona.

  14. A Model for Enhancing Internet Medical Document Retrieval with “Medical Core Metadata”

    PubMed Central

    Malet, Gary; Munoz, Felix; Appleyard, Richard; Hersh, William

    1999-01-01

    Objective: Finding documents on the World Wide Web relevant to a specific medical information need can be difficult. The goal of this work is to define a set of document content description tags, or metadata encodings, that can be used to promote disciplined search access to Internet medical documents. Design: The authors based their approach on a proposed metadata standard, the Dublin Core Metadata Element Set, which has recently been submitted to the Internet Engineering Task Force. Their model also incorporates the National Library of Medicine's Medical Subject Headings (MeSH) vocabulary and Medline-type content descriptions. Results: The model defines a medical core metadata set that can be used to describe the metadata for a wide variety of Internet documents. Conclusions: The authors propose that their medical core metadata set be used to assign metadata to medical documents to facilitate document retrieval by Internet search engines. PMID:10094069

  15. Étude descriptive du processus d’évaluation et de documentation de la douleur postopératoire dans un hôpital universitaire

    PubMed Central

    Bergeron, Dave A; Leduc, Geneviève; Marchand, Serge; Bourgault, Patricia

    2011-01-01

    Plusieurs études démontrent que les patients reçoivent souvent un traitement insatisfaisant de la douleur en contexte postopératoire. Le but de la présente étude descriptive était d’examiner et d’analyser diverses données ayant trait au soulagement de 40 patients après une intervention chirurgicale non urgente. Les patients ont rempli un journal de douleur afin d’évaluer le niveau d’intensité et de désagrément engendré par la douleur durant les trois premières journées postopératoires. Une analyse du dossier a permis de vérifier la documentation de l’évaluation de la douleur par le personnel infirmier. Les résultats indiquent que la douleur en contexte postopératoire est peu et inadéquatement évaluée et peu documentée par le personnel infirmier. Lorsque la douleur est évaluée selon une échelle numérique, les infirmières ont tendance à la sous-évaluer en comparaison avec l’évaluation notée par les patients. Pour la première journée postopératoire, l’intensité moyenne de la douleur documentée par les infirmières est de 1,57 (±0,23) sur une échelle numérique de 0 à 10, alors que l’intensité moyenne documentée par les patients est de 3,82 (±0,41). Cette étude fait ainsi ressortir qu’il n’y a pas de corrélation significative entre l’intensité de la douleur documentée par l’infirmière et celle notée par le patient, ce qui peut expliquer en partie un soulagement non optimal. PMID:21499582

  16. Authorization basis supporting documentation for plutonium finishing plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    King, J.P., Fluor Daniel Hanford

    1997-03-05

    The identification and definition of the authorization basis for the Plutonium Finishing Plant (PFP) facility and operations are essential for compliance to DOE Order 5480.21, Unreviewed Safety Questions. The authorization basis, as defined in the Order, consists of those aspects of the facility design basis, i.e., the structures, systems and components (SSCS) and the operational requirements that are considered to be important to the safety of operations and are relied upon by DOE to authorize operation of the facility. These facility design features and their function in various accident scenarios are described in WHC-SD-CP-SAR-021, Plutonium Finishing Plant Final Safety Analysismore » Report (FSAR), Chapter 9, `Accident Analysis.` Figure 1 depicts the relationship of the Authorization Basis to its components and other information contained in safety documentation supporting the Authorization Basis. The PFP SSCs that are important to safety, collectively referred to as the `Safety Envelope` are discussed in various chapters of the FSAR and in WHC-SD-CP-OSR-010, Plutonium Finishing Plant Operational Safety Requirements. Other documents such as Criticality Safety Evaluation Reports (CSERS) address and support some portions of the Authorization Basis and Safety Envelope.« less

  17. Reducing Operating Costs by Optimizing Space in Facilities

    DTIC Science & Technology

    2012-03-01

    Base level 5 engineering units will provide facility floor plans, furniture layouts, and staffing documentation as necessary. One obstacle...due to the quantity and diverse locations. Base level engineering units provided facility floor plans, furniture layouts, and staffing documentation... furniture purchases and placement 5. Follow a quality systematic process in all decisions The per person costs can be better understood with a real

  18. Acceptable knowledge document for INEEL stored transuranic waste -- Rocky Flats Plant waste. Revision 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-01-23

    This document and supporting documentation provide a consistent, defensible, and auditable record of acceptable knowledge for waste generated at the Rocky Flats Plant which is currently in the accessible storage inventory at the Idaho National Engineering and Environmental Laboratory. The inventory consists of transuranic (TRU) waste generated from 1972 through 1989. Regulations authorize waste generators and treatment, storage, and disposal facilities to use acceptable knowledge in appropriate circumstances to make hazardous waste determinations. Acceptable knowledge includes information relating to plant history, process operations, and waste management, in addition to waste-specific data generated prior to the effective date of the RCRAmore » regulations. This document is organized to provide the reader a comprehensive presentation of the TRU waste inventory ranging from descriptions of the historical plant operations that generated and managed the waste to specific information about the composition of each waste group. Section 2 lists the requirements that dictate and direct TRU waste characterization and authorize the use of the acceptable knowledge approach. In addition to defining the TRU waste inventory, Section 3 summarizes the historical operations, waste management, characterization, and certification activities associated with the inventory. Sections 5.0 through 26.0 describe the waste groups in the inventory including waste generation, waste packaging, and waste characterization. This document includes an expanded discussion for each waste group of potential radionuclide contaminants, in addition to other physical properties and interferences that could potentially impact radioassay systems.« less

  19. SGSLR Testing Facility at GGAO

    NASA Technical Reports Server (NTRS)

    Hoffman, Evan

    2016-01-01

    This document describes the SGSLR Test Facility at Goddards Geophysical and Astronomical Observatory (NASA Goddard area 200) and its features are described at a high level for users. This is the facility that the Contractor will be required to use for the Testing and Verification of all SGSLR systems.

  20. Institutional environmental impact statement, Michoud Assembly Facility, New Orleans, Louisiana

    NASA Technical Reports Server (NTRS)

    1978-01-01

    A description and analysis of Michoud Assembly Facility as an operational base for both NASA and NASA-related programs and various government tenant-agencies and their contractors is given. Tenant-agencies are governmental agencies or governmental agency contractors which are not involved in a NASA program, but utilize office or manufacturing space at the Michoud Assembly Facility. The statements represent the full description of the likely environmental effects of the facility and are used in the process of making program and project decisions.

  1. Description of the PMAD systems test bed facility and data system

    NASA Technical Reports Server (NTRS)

    Trase, Larry; Fong, Don; Adkins, Vicki; Birchenough, Arthur

    1992-01-01

    The power management and distribution (PMAD) systems test bed facility, including the power sources and loads available, is discussed, and the PMAD data system (PDS) is described. The PDS controls the test-bed facility hardware, and monitors and records the electric power system control data bus and external data. The PDS architecture is discussed, and each of the subsystems is described.

  2. Developing Your Employee Handbook: Job Descriptions.

    ERIC Educational Resources Information Center

    Perreault, Joe

    1988-01-01

    A job description is a brief document that conveys to employees the importance of their jobs to the overall success of the day-care center. If properly written, it can contribute to effective employee motivation and supervision. (RJC)

  3. Energy Systems Integration Facility (ESIF) Facility Stewardship Plan: Revision 2.1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Torres, Juan; Anderson, Art

    The U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), has established the Energy Systems Integration Facility (ESIF) on the campus of the National Renewable Energy Laboratory (NREL) and has designated it as a DOE user facility. This 182,500-ft2 research facility provides state-of-the-art laboratory and support infrastructure to optimize the design and performance of electrical, thermal, fuel, and information technologies and systems at scale. This Facility Stewardship Plan provides DOE and other decision makers with information about the existing and expected capabilities of the ESIF and the expected performance metrics to be applied to ESIF operations.more » This plan is a living document that will be updated and refined throughout the lifetime of the facility.« less

  4. Technical Support Document for Title V Permitting of Printing Facilities

    EPA Pesticide Factsheets

    Stationary source emissions monitoring is required to demonstrate that a source is meeting the requirements in Federal or state rules, including Title V. This document provides the technical support for compliance in the printing and publishing industry.

  5. Life science payloads planning study integration facility survey results

    NASA Technical Reports Server (NTRS)

    Wells, G. W.; Brown, N. E.; Nelson, W. G.

    1976-01-01

    The integration facility survey effort described is structured to examine the facility resources needed to conduct life science payload (LSP) integration checkout activities at NASA-JSC. The LSP integration facility operations and functions are defined along with the LSP requirements for facility design. A description of available JSC life science facilities is presented and a comparison of accommodations versus requirements is reported.

  6. Document control and Conduct of Operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Collins, S.K.; Meltzer, F.L.

    1993-01-01

    Department of Energy (DOE) Order 5480.19, Conduct of operations, places stringent requirements on a wide range of activities at DOE facilities. These requirements directly affect personnel at the Advanced Test Reactor (ATR), which is located in the Test Reactor Area of the Idaho National Engineering Laboratory and operated for DOE by EG G Idaho, Inc. In order for the ATR to comply with 5480.19, the very personality of the reactor facility's document control unit has had to undergo a major change. The Facility and Administrative Support Unit (FAS) is charged with nudntenance of ATR's controlled ddcuments-diousands of operating and administrativemore » procedures. Prior to the imposition of 5480.19, FAS was content to operate in a clerical support mode, seldom questioning or seeking to improve. This numer of doing business is inappropriate within the framework of DOE 5480.19 and is also at odds with the approach to Total Quality Management (TQM) promulgated by EG G Idaho.To comply with the requirements of 5480.19, FAS has Actively applied TQM principles. Empowered personnel to unprove operations through the establishment of a teatn approach. Begun an automation process that is already paying large dividends in terms of improved procedure accuracy and compliance. A state-of-the-art text retrival system is already in place. We are vigorously pursuing fully automated document tmcidng and document management. This paper describes in detail the steps taken to date, the improvements and the lessons learned. It aLw discusses plans for the future that will enable FAS to support the ATR in inccreasing its responsiveness to the Conduct of Operations Order.« less

  7. Advanced X-ray Astrophysics Facility (AXAF): Science working group report. [space shuttle payload

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The Advanced X-Ray Astrophysics Facility (AXAF) mission concept is examined from a scientific viewpoint. A brief description of the development of X-ray astronomy and a summary description of AXAF, the scientific objectives of the facility, a description of representative scientific instruments, requirements for X-ray ground testing, and a summary of studies related to spacecraft and support subsystems, are included.

  8. Payload/GSE/data system interface: Users guide for the VPF (Vertical Processing Facility)

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Payload/GSE/data system interface users guide for the Vertical Processing Facility is presented. The purpose of the document is three fold. First, the simulated Payload and Ground Support Equipment (GSE) Data System Interface, which is also known as the payload T-0 (T-Zero) System is described. This simulated system is located with the Cargo Integration Test Equipment (CITE) in the Vertical Processing Facility (VPF) that is located in the KSC Industrial Area. The actual Payload T-0 System consists of the Orbiter, Mobile Launch Platforms (MLPs), and Launch Complex (LC) 39A and B. This is referred to as the Pad Payload T-0 System (Refer to KSC-DL-116 for Pad Payload T-0 System description). Secondly, information is provided to the payload customer of differences between this simulated system and the actual system. Thirdly, a reference guide of the VPF Payload T-0 System for both KSC and payload customer personnel is provided.

  9. Centrality based Document Ranking

    DTIC Science & Technology

    2014-11-01

    clinical domain and very uncommon elsewhere. A regular IR system may fail to rank documents from such a domain, dealing with symptoms, diagnosis and...description). We prepared a hand-crafted list of synonyms for each of the query types, viz. diagnosis , test and treatment. This list was used to expand the...Miller. Semantic search. In INTERNATIONAL WORLD WIDE WEB CONFERENCE, pages 700–709. ACM, 2003. 8. A. Hanbury and M. Lupu . Toward a Model of Domain

  10. A climatological description of the Savannah River Site

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hunter, C.H.

    1990-05-22

    This report provides a general climatological description of the Savannah River Site. The description provides both regional and local scale climatology. The regional climatology includes a general regional climatic description and presents information on occurrence frequencies of the severe meteorological phenomena that are important considerations in the design and siting of a facility. These phenomena include tornadoes, thunderstorms, hurricanes, and ice/snow storms. Occurrence probabilities given for extreme tornado and non-tornado winds are based on previous site specific studies. Local climatological conditions that are significant with respect to the impact of facility operations on the environment are described using on-site ormore » near-site meteorological data. Summaries of wind speed, wind direction, and atmospheric stability are primarily based on the most recently generated five-year set of data collected from the onsite meteorological tower network (1982--86). Temperature, humidity, and precipitation summaries include data from SRL's standard meteorological instrument shelter and the Augusta National Weather Service office at Bush Field through 1986. A brief description of the onsite meteorological monitoring program is also provided. 24 refs., 15 figs., 22 tabs.« less

  11. Preliminary assessment of the aquatic impacts of a proposed defense waste processing facility at the Savannah River Plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mackey, H.E. Jr.

    1979-01-01

    A review of the literature indicates that a significant body of descriptive information exists concerning the aquatic ecology of Upper Three Runs Creek and Four Mile Creek of the Savannah River Plant south of Aiken, South Carolina. This information is adequate for preparation of an environmental document evaluating these streams. These streams will be impacted by construction and operation of a proposed Defense Waste Processing Facility for solidification of high level defense waste. Potential impacts include (1) construction runoff, erosion, and siltation, (2) effluents from a chemical and industrial waste treatment facility, and (3) radionuclide releases. In order to bettermore » evaluate potential impacts, recommend mitigation methods, and comply with NEPA requirements, additional quantitative biological information should be obtained through implementation of an aquatic baseline program.« less

  12. RCRA Facility Investigation/Remedial Investigation Report with Baseline Risk Assessment for the Fire Department Hose Training Facility (904-113G)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Palmer, E.

    1997-04-01

    This report documents the Resource Conservation and Recovery Act (RCRA) Facility Investigation/Remedial Investigation/Baseline Risk Assessment (RFI/RI/BRA) for the Fire Department Hose Training Facility (FDTF) (904-113G).

  13. 30 CFR 254.4 - May I reference other documents in my response plan?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST... documents, and Oil Spill Removal Organization (OSRO) documents that are readily accessible to the Regional...

  14. 30 CFR 254.4 - May I reference other documents in my response plan?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST... documents, and Oil Spill Removal Organization (OSRO) documents that are readily accessible to the Regional...

  15. 30 CFR 254.4 - May I reference other documents in my response plan?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... OF THE INTERIOR OFFSHORE OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST... documents, and Oil Spill Removal Organization (OSRO) documents that are readily accessible to the Regional...

  16. Test Facilities Capability Handbook: Volume 1 - Stennis Space Center (SSC); Volume 2 - Marshall Space Flight Center (MSFC)

    NASA Technical Reports Server (NTRS)

    Hensarling, Paula L.

    2007-01-01

    The John C. Stennis Space Center (SSC) is located in Southern Mississippi near the Mississippi-Louisiana state line. SSC is chartered as the National Aeronautics and Space Administration (NASA) Center of Excellence for large space transportation propulsion system testing. This charter has led to many unique test facilities, capabilities and advanced technologies provided through the supporting infrastructure. SSC has conducted projects in support of such diverse activities as liquid, and hybrid rocket testing and development; material development; non-intrusive plume diagnostics; plume tracking; commercial remote sensing; test technology and more. On May 30, 1996 NASA designated SSC the lead center for rocket propulsion testing, giving the center total responsibility for conducting and/or managing all NASA rocket engine testing. Test services are now available not only for NASA but also for the Department of Defense, other government agencies, academia, and industry. This handbook was developed to provide a summary of the capabilities that exist within SSC. It is intended as a primary resource document, which will provide the reader with the top-level capabilities and characteristics of the numerous test facilities, test support facilities, laboratories, and services. Due to the nature of continually evolving programs and test technologies, descriptions of the Center's current capabilities are provided. Periodic updates and revisions of this document will be made to maintain its completeness and accuracy.

  17. High-level waste tank farm set point document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Anthony, J.A. III

    1995-01-15

    Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREASmore » listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope.« less

  18. Description and Operation of the Mark 1B Plasma Focus Radiation Facility,

    DTIC Science & Technology

    plasma focus facility (Mk 1B) at The Aerospace Corporation produces x-ray fluences that are applicable to most radiation testing problems (e.g., integrated circuits or transistors). Although the facility has only one beryllium window for exposing 1.6-cm-dia samples to doses of 25 to 45 krad (Si) per shot, three more windows could be added and the additional samples exposed simultaneously. The facility is experiencing switch problems and is presently averaging 50 shots per week--15 shots per day for 3 or 4 days. The results of a comprehensive switch analysis should

  19. Evaluating Michigan commercial vehicle enforcement strategies and facilities.

    DOT National Transportation Integrated Search

    2015-03-01

    This report documents evaluation results and recommendations for Michigan commercial vehicle : enforcement strategies and facilities. Through literature review, online survey and site visits, : enforcement strategies and facilities in other states an...

  20. Federal Facilities Programs.

    ERIC Educational Resources Information Center

    Chase, William W.

    Brief descriptions are presented of a number of Office of Education federal funding programs directly supporting educational facilities planning and construction. Programs now in operation and several currently under consideration are pointed out. Consideration is also given to several programs in federal agencies other than the Office of…

  1. High-Explosives Applications Facility (HEAF)

    NASA Astrophysics Data System (ADS)

    Morse, J. L.; Weingart, R. C.

    1989-03-01

    This Safety Analysis Report (SAR) reviews the safety and environmental aspects of the High Explosives Applications Facility (HEAF). Topics covered include the site selected for the HEAF, safety design criteria, operations planned within the facility, and the safety and environmental analyses performed on this project to date. Provided in the Summary section is a review of hazards and the analyses, conclusions, and operating limits developed in this SAR. Appendices provide supporting documents relating to this SAR. This SAR is required by the LLNL Health and Safety Manual and DOE Order 5481.1B(2) to document the safety analysis efforts. The SAR was assembled by the Hazards Control Department, B-Division, and HEAF project personnel. This document was reviewed by B Division, the Chemistry Department, the Hazards Control Department, the Laboratory Associate Director for Administration and Operations, and the Associate Directors ultimately responsible for HEAF operations.

  2. Documentation of Apollo 15 samples

    NASA Technical Reports Server (NTRS)

    Sutton, R. L.; Hait, M. H.; Larson, K. B.; Swann, G. A.; Reed, V. S.; Schaber, G. G.

    1972-01-01

    A catalog is presented of the documentation of Apollo 15 samples using photographs and verbal descriptions returned from the lunar surface. Almost all of the Apollo 15 samples were correlated with lunar surface photographs, descriptions, and traverse locations. Where possible, the lunar orientations of rock samples were reconstructed in the lunar receiving laboratory, using a collimated light source to reproduce illumination and shadow characteristics of the same samples shown in lunar photographs. In several cases, samples were not recognized in lunar surface photographs, and their approximate locations are known only by association with numbered sample bags used during their collection. Tables, photographs, and maps included in this report are designed to aid in the understanding of the lunar setting of the Apollo 15 samples.

  3. Cold Vacuum Drying (CVD) Facility Acceptance for Beneficial Use

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BRISBIN, S.A.

    2000-01-05

    This document provides a checklist of the items required for turnover of the Cold Vacuum Drying Facility from the Construction Projects organization to the Operations organization. This document will be updated periodically to document completion of additional deliverables.

  4. HIV screening among TB patients and co-trimoxazole preventive therapy for TB/HIV patients in Addis Ababa: facility based descriptive study.

    PubMed

    Denegetu, Amenu Wesen; Dolamo, Bethabile Lovely

    2014-01-01

    Collaborative TB/HIV management is essential to ensure that HIV positive TB patients are identified and treated appropriately, and to prevent tuberculosis (TB) in HIV positive patients. The purpose of this study was to assess HIV case finding among TB patients and Co-trimoxazole Preventive Therapy (CPT) for HIV/TB patients in Addis Ababa. A descriptive cross-sectional, facility-based survey was conducted between June and July 2011. Data was collected by interviewing 834 TB patients from ten health facilities in Addis Ababa. Both descriptive and inferential statistics were used to summarize and analyze findings. The proportion of TB patients who (self reported) were offered for HIV test, tested for HIV and tested HIV positive during their anti-TB treatment follow-up were; 87.4%, 69.4% and 20.2%; respectively. Eighty seven HIV positive patients were identified, who knew their status before diagnosed for the current TB disease, bringing the cumulative prevalence of HIV among TB patients to 24.5%. Hence, the proportion of TB patients who knew their HIV status becomes 79.9%. The study revealed that 43.6% of those newly identified HIV positives during anti-TB treatment follow-up were actually treated with CPT. However, the commutative proportion of HIV positive TB patients who were ever treated with CPT was 54.4%; both those treated before the current TB disease and during anti-TB treatment follow-up. HIV case finding among TB patients and provision of CPT for TB/HIV co-infected patients needs boosting. Hence, routine offering of HIV test and provision of CPT for PLHIV should be strengthened in-line with the national guidelines.

  5. Strengthening the Role of Part-Time Faculty in Community Colleges. Example Job Description for Part-Time Faculty: Valencia College--Job Description and Essential Competencies

    ERIC Educational Resources Information Center

    Center for Community College Student Engagement, 2013

    2013-01-01

    In an effort to support college conversations regarding strengthening the role of part-time faculty, this brief document presents the job description for a Valencia College part-time/adjunct professor (revised as of July 19, 2013). The description includes essential functions, qualifications, and knowledge, skills, and abilities. This is followed…

  6. NASA Langley's Aircraft Landing Dynamics Facility

    NASA Technical Reports Server (NTRS)

    Davis, Pamela A.

    1993-01-01

    The Aircraft Landing Dynamics Facility (ALDF) is a unique facility with the ability to test aircraft landing gear systems on actual runway surfaces at operational ground speeds and loading conditions. A brief historical overview of the original Landing Loads Track (LLT) is given, followed by a detailed description of the new ALDF systems and operational capabilities.

  7. State Requirements for Educational Facilities, 1999.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Office of Educational Facilities.

    This updated, two-volume document provides guidance for those involved in the educational facilities procurement process, and includes recent legislative changes affecting the state of Florida's building code. The first volume is organized by the sequence of steps required in the facilities procurement process and presents state requirements for…

  8. Arts Education Facilities Planner for Grades K-8.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh.

    This reference document for public school facility designers addresses arts education programs and the facilities that support them. Some sections focus on concepts and features common to most or all arts education subject areas, such as sound management, acoustical design, teacher workstations, and performance facilities. Other sections describe…

  9. Developing a national role description for medical directors in long-term care

    PubMed Central

    Rahim-Jamal, Sherin; Quail, Patrick; Bhaloo, Tajudaullah

    2010-01-01

    OBJECTIVE To develop a national role description for medical directors in long-term care (LTC) based on role functions drawn from the literature and the LTC industry. DESIGN A questionnaire about the role functions identified from the literature was mailed or e-mailed to randomly selected medical directors, directors of care or nursing (DOCs), and administrators in LTC facilities. SETTING Long-term care facilities in Canada randomly selected from regional clusters. PARTICIPANTS Medical directors, DOCs, and administrators in LTC facilities; a national advisory group of medical directors from the Long Term Care Medical Directors Association of Canada; and a volunteer group of medical directors. MAIN OUTCOME MEASURES Respondents were asked to indicate, from the list of identified functions, 1) whether medical directors spent any time on each activity; 2) whether medical directors should spend time on each activity; and 3) if medical directors should spend time on an activity, whether the activity was “essential” or “desirable.” RESULTS An overall response rate of 37% was obtained. At least 80% of the respondents from all 3 groups (medical directors, DOCs, and administrators) highlighted 24 functions they deemed to be “essential” or “desirable,” which were then included in the role description. In addition, the advisory group expanded the role description to include 5 additional responsibilities from the remaining 18 functions originally identified. A volunteer group of medical directors confirmed the resulting role description. CONCLUSION The role description developed as a result of this study brings clarity to the medical director’s role in Canadian LTC facilities; the functions outlined are considered important for medical directors to undertake. The role description could be a useful tool in negotiations pertaining to time commitment and expectations of a medical director and fair compensation for services rendered. PMID:20090058

  10. Precise Documentation: The Key to Better Software

    NASA Astrophysics Data System (ADS)

    Parnas, David Lorge

    The prime cause of the sorry “state of the art” in software development is our failure to produce good design documentation. Poor documentation is the cause of many errors and reduces efficiency in every phase of a software product's development and use. Most software developers believe that “documentation” refers to a collection of wordy, unstructured, introductory descriptions, thousands of pages that nobody wanted to write and nobody trusts. In contrast, Engineers in more traditional disciplines think of precise blueprints, circuit diagrams, and mathematical specifications of component properties. Software developers do not know how to produce precise documents for software. Software developments also think that documentation is something written after the software has been developed. In other fields of Engineering much of the documentation is written before and during the development. It represents forethought not afterthought. Among the benefits of better documentation would be: easier reuse of old designs, better communication about requirements, more useful design reviews, easier integration of separately written modules, more effective code inspection, more effective testing, and more efficient corrections and improvements. This paper explains how to produce and use precise software documentation and illustrate the methods with several examples.

  11. Gradient Heating Facility. Experiment cartridges. Description and general specifications

    NASA Technical Reports Server (NTRS)

    Breton, J.

    1982-01-01

    Specifications that define experiment cartridges that are compatible with the furnace of the gradient heating facility on board the Spacelab are presented. They establish a standard cartridge design independent of the type of experiment to be conducted. By using them, experimenters can design, construct, and test the hot section of the cartridge, known as the high temperature nacelle.

  12. Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ermi, A.M.

    1997-05-01

    Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new crediblemore » failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.« less

  13. 24 CFR 582.100 - Program component descriptions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES SHELTER PLUS CARE Assistance Provided § 582.100 Program component descriptions. (a) Tenant-based rental assistance (TRA). Tenant-based rental assistance provides...

  14. Modular Integrated Stackable Layers (MISL) MI_MSP430A Board Design Document (BDD)

    NASA Technical Reports Server (NTRS)

    Yim, Hester

    2013-01-01

    This is a board-level design document for Modular Integrated Stackable Layers (MISL) MI_MSP430A board (PIN MSP430F5438A). The Board Design Document (BDD) contains the description, features of microcontroller, electrical and mechanical design, and drawings.

  15. Documentation of a digital spatial data base for hydrologic investigations, Broward County, Florida

    USGS Publications Warehouse

    Sonenshein, R.S.

    1992-01-01

    Geographic information systems have become an important tool in planning for the protection and development of natural resources, including ground water and surface water. A digital spatial data base consisting of 18 data layers that can be accessed by a geographic information system was developed for Broward County, Florida. Five computer programs, including one that can be used to create documentation files for each data layer and four that can be used to create data layers from data files not already in geographic information system format, were also developed. Four types of data layers have been developed. Data layers for manmade features include major roads, municipal boundaries, the public land-survey section grid, land use, and underground storage tank facilities. The data layer for topographic features consists of surveyed point land-surface elevations. Data layers for hydrologic features include surface-water and rainfall data-collection stations, surface-water bodies, water-control district boundaries, and water-management basins. Data layers for hydrogeologic features include soil associations, transmissivity polygons, hydrogeologic unit depths, and a finite-difference model grid for south-central Broward County. Each data layer is documented as to the extent of the features, number of features, scale, data sources, and a description of the attribute tables where applicable.

  16. Technical Assistance and Training from the Document Design Project. Final Report.

    ERIC Educational Resources Information Center

    American Institutes for Research, Washington, DC.

    Contained in this report is a description of the technical assistance and training phase of the Document Design Project, a program funded by the National Institute of Education and intended to address and correct the readability problems posed by public documents. The first section of the report provides background material on the assistance and…

  17. The computational structural mechanics testbed data library description

    NASA Technical Reports Server (NTRS)

    Stewart, Caroline B. (Compiler)

    1988-01-01

    The datasets created and used by the Computational Structural Mechanics Testbed software system are documented by this manual. A description of each dataset including its form, contents, and organization is presented.

  18. The computational structural mechanics testbed data library description

    NASA Technical Reports Server (NTRS)

    Stewart, Caroline B. (Compiler)

    1988-01-01

    The datasets created and used by the Computational Structural Mechanics Testbed software system is documented by this manual. A description of each dataset including its form, contents, and organization is presented.

  19. 3 CFR - Federal Support for the Randolph-Sheppard Vending Facility Program

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 3 The President 1 2013-01-01 2013-01-01 false Federal Support for the Randolph-Sheppard Vending Facility Program Presidential Documents Other Presidential Documents Memorandum of January 20, 2012 Federal Support for the Randolph-Sheppard Vending Facility Program Memorandum for the Heads of Executive Departments and Agencies Thousands of American...

  20. Principal Investigator in a Box Technical Description Document. 2.0

    NASA Technical Reports Server (NTRS)

    Groleau, Nick; Frainier, Richard

    1994-01-01

    This document provides a brief overview of the PI-in-a-Box system, which can be used for automatic real-time reaction to incoming data. We will therefore outline the current system's capabilities and limitations, and hint at how best to think about PI-in-a-Box as a tool for real-time analysis and reaction in section two, below. We also believe that the solution to many commercial real-time process problems requires data acquisition and analysis combined with rule-based reasoning and/or an intuitive user interface. We will develop the technology reuse potential in section three. Currently, the system runs only on Apple Computer's Macintosh series.

  1. The New Job Description Handbook for the School Business Office.

    ERIC Educational Resources Information Center

    Association of School Business Officials International, Reston, VA.

    The ways in which individual school districts view and staff their business functions vary greatly. This document presents organizational charts and job descriptions of professional positions in the school-business office collected from school districts throughout the United States and Canada. Over 100 job descriptions from 50 school districts are…

  2. WASTE HANDLING BUILDING ELECTRICAL SYSTEM DESCRIPTION DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    S.C. Khamamkar

    2000-06-23

    Operations Monitoring and Control System for supervisory monitoring and control signals. The system interfaces with all facility support loads such as heating, ventilation, and air conditioning, office, fire protection, monitoring and control, safeguards and security, and communications subsystems.« less

  3. Idaho National Laboratory PCB Annual Document Log and Annual Records Report for Calendar Year 2013

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    no name on report

    The requirements for the reporting of polychlorinated biphenyl (PCB)-related activities are found in 40 Code of Federal Regulations (CFR) 761 Subpart J, "General Records and Reports." The PCB Annual Document Log is a detailed record of the PCB waste handling activities at the facility. The facility must prepare it each year by July 1 and maintain it at the facility for at least 3 years after the facility ceases using or storing PCBs and PCB items. While submittal of the PCB Annual Document Log to the U.S. Environmental Protection Agency (EPA) is not required by regulation, EPA has verbally requestedmore » in telephone conversations that this report be submitted to them on an annual basis. The Annual Document Log section of this report meets the requirements of 40 CFR 761.180(a)(2), as applicable, while the Annual Records section meets the requirement of 40 CFR 761.180(a)(1).« less

  4. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  5. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  6. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  7. 48 CFR 811.202 - Maintenance of standardization documents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

  8. 48 CFR 811.202 - Maintenance of standardization documents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

  9. 48 CFR 811.202 - Maintenance of standardization documents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

  10. 48 CFR 811.202 - Maintenance of standardization documents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

  11. 48 CFR 811.202 - Maintenance of standardization documents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...

  12. 7 CFR 1710.401 - Loan application documents.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... beginning date of the loan period and shall be the same as the date on the Financial and Statistical Report... headquarters facilities, Form 740g need not be submitted. (5) Financial and statistical report. Distribution... activities. (13) Federal debt delinquency requirements. See 1710.126. The following documents are required...

  13. 38 CFR 17.501 - Confidential and privileged documents.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... facility: (i) Medical records reviews, (ii) Drug usage evaluations, (iii) Blood usage reviews, (iv... quality assurance reviews. (e) Documents which are confidential and privileged may be in written, computer... of Boards of Investigations; (5) Completed patient satisfaction survey questionnaires and findings...

  14. 38 CFR 17.501 - Confidential and privileged documents.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... facility: (i) Medical records reviews, (ii) Drug usage evaluations, (iii) Blood usage reviews, (iv... quality assurance reviews. (e) Documents which are confidential and privileged may be in written, computer... of Boards of Investigations; (5) Completed patient satisfaction survey questionnaires and findings...

  15. 38 CFR 17.501 - Confidential and privileged documents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... facility: (i) Medical records reviews, (ii) Drug usage evaluations, (iii) Blood usage reviews, (iv... quality assurance reviews. (e) Documents which are confidential and privileged may be in written, computer... of Boards of Investigations; (5) Completed patient satisfaction survey questionnaires and findings...

  16. 38 CFR 17.501 - Confidential and privileged documents.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... facility: (i) Medical records reviews, (ii) Drug usage evaluations, (iii) Blood usage reviews, (iv... quality assurance reviews. (e) Documents which are confidential and privileged may be in written, computer... of Boards of Investigations; (5) Completed patient satisfaction survey questionnaires and findings...

  17. 38 CFR 17.501 - Confidential and privileged documents.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... facility: (i) Medical records reviews, (ii) Drug usage evaluations, (iii) Blood usage reviews, (iv... quality assurance reviews. (e) Documents which are confidential and privileged may be in written, computer... of Boards of Investigations; (5) Completed patient satisfaction survey questionnaires and findings...

  18. Emergency department documentation of alleged excessive use of force.

    PubMed

    Strote, Jared; Verzemnieks, Erik; Walsh, Mimi

    2013-12-01

    Patients' complaints of excessive use of force (EUOF) by police occur frequently in emergency departments (EDs). Limited, if any, education or guidelines exist for documenting alleged EUOF despite extensive instruction for other forms of potential abuse or assault. Our objective was to examine the documentation by ED staff when patients complained of EUOF. A retrospective cohort design was used, identifying every use of force over a 1-year period by a single law enforcement agency that was followed by an ED visit within 24 hours. Charts were then analyzed for complaints of excessive force. For these cases, documentation was evaluated using standards for other forms of abuse and assault. Of 187 ED visits, 32 (17%) involved patients who were unable to give a history and 20 (11%) had nontrauma evaluations only. Of the remaining 135, there were 13 documented complaints (10%) of EUOF. Of these, 8 complaints (62%) described the mechanism of injury completely and 10 complaints (77%) had a complete description of the injury. No charts discussed whether the examination was consistent with the history. Inappropriate subjective terminology was used in 7 charts (54%), and the police description of events was described as fact in 7 charts (54%). Guilt was assigned in 5 charts (39%). In one ED, EUOF complaints were not documented to the standards for other forms of alleged assault and abuse. There may be a benefit to further education and guidelines on how to deal with ED presentations of EUOF.

  19. 29 CFR 2520.102-3 - Contents of summary plan description.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... document that accompanies the plan's SPD, provided that the document satisfies the style and format... descriptive provisions in addition to those prescribed in paragraph (t)(2) of this section. However, the style... Office of Management and Budget under control number 1210-0039) [42 FR 37180, July 19, 1977, as amended...

  20. 75 FR 72829 - Los Alamos Historical Document Retrieval and Assessment (LAHDRA) Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-26

    ... Historical Document Retrieval and Assessment (LAHDRA) Project The Centers for Disease Control and Prevention... release of the Final Report of the Los Alamos Historical Document Retrieval and Assessment (LAHDRA)Project... information about historical chemical or radionuclide releases from facilities at the Los Alamos National...

  1. Detailed Design Documentation, without the Pain

    NASA Astrophysics Data System (ADS)

    Ramsay, C. D.; Parkes, S.

    2004-06-01

    Producing detailed forms of design documentation, such as pseudocode and structured flowcharts, to describe the procedures of a software system:(1) allows software developers to model and discuss their understanding of a problem and the design of a solution free from the syntax of a programming language,(2) facilitates deeper involvement of non-technical stakeholders, such as the customer or project managers, whose influence ensures the quality, correctness and timeliness of the resulting system,(3) forms comprehensive documentation of the system for its future maintenance, reuse and/or redeployment.However, such forms of documentation require effort to create and maintain.This paper describes a software tool which is currently being developed within the Space Systems Research Group at the University of Dundee which aims to improve the utility of, and the incentive for, creating detailed design documentation for the procedures of a software system. The rationale for creating such a tool is briefly discussed, followed by a description of the tool itself, a summary of its perceived benefits, and plans for future work.

  2. 36 CFR 1284.30 - Does NARA lend documents to other institutions for exhibit purposes?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Does NARA lend documents to... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES EXHIBITS § 1284.30 Does NARA lend documents to other institutions for exhibit purposes? Yes, NARA considers lending documents that are in appropriate...

  3. [Interrelationship among "NANDA, NOC and NIC". A pilot study and an evaluation of a nursing document].

    PubMed

    Gomez de Segura Navarro, Carlota; Esain Larrambe, Ainhoa; Tina Majuelo, Pilar; Guembe Ibáñez, Irene; Fernández Perea, Laura; Narvaiza Solís, M Jesús

    2006-01-01

    (a) to determine the effectiveness of a nursing document which integrates nursing diagnoses, nursing treatments/actions (NIC), and results (NOC); (b) to verify the application of the aforementioned document in a hospitalization unit. A descriptive, transversal and observational study. Nursing documents (NANDA, NIC and NOC taxonomies). PHASES: 1st: analysis of the content in the nursing documentation for 23 pneumonic patients: Selection of nursing diagnoses and the most frequent interdependent problems. 2nd: Selection of results and nursing treatment/actions. 3rd: Elaboration of the document and a description of the Likert scales to define the state of the indicators for each result. 4th: A pilot study of the document applied to 12 patients. the application of the document permits one to identify the real status of a patient; to establish specific objectives; to improve the recording of data; to observe the effectiveness of treatment; to include educational activities; to give greater continuity and quality to a treatment plan.

  4. Report on architecture description for the INFLO prototype.

    DOT National Transportation Integrated Search

    2014-01-01

    This report documents the Architecture Description for the implementation of the Intelligent Network Flow Optimization (INFLO) Prototype bundle within the Dynamic Mobility Applications (DMA) portion of the Connected Vehicle Program. The intent is to ...

  5. Environmental effects of dredging. Documentation of the dyecon module for ADDAMS: Determining the hydraulic retention and efficiency of confined disposal facilities. Technical note

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hayes, D.F.; Schroeder, P.R.; Engler, R.M.

    This technical note describes procedures for determining mean hydraulic retention time and efficiency of a confined disposal facility (CDF) from a dye tracer slug test. These parameters are required to properly design a CDF for solids retention and for effluent quality considerations. Detailed information on conduct and analysis of dye tracer studies can be found in Engineer Manual 1110-2-5027, Confined Dredged Material Disposal. This technical note documents the DYECON computer program which facilitates the analysis of dye tracer concentration data and computes the hydraulic efficiency of a CDF as part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  6. South Florida freight advanced traveler information system : architecture and implementation as built documentation report.

    DOT National Transportation Integrated Search

    2015-05-01

    The primary purpose of the As Built Documentation is to provide a description of any modifications made to the original architecture along with justification as to why the architecture was changed. In addition, this documentation provides the followi...

  7. Consolidated Cab Display (CCD) System, Project Planning Document (PPD),

    DTIC Science & Technology

    1981-02-01

    1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD

  8. An inventory of aeronautical ground research facilities. Volume 3: Structural

    NASA Technical Reports Server (NTRS)

    Pirrello, C. J.; Hardin, R. D.; Heckart, M. V.; Brown, K. R.

    1971-01-01

    An inventory of test facilities for conducting acceleration, environmental, impact, structural shock, load, heat, vibration, and noise tests is presented. The facility is identified with a description of the equipment, the testing capabilities, and cost of operation. Performance data for the facility are presented in charts and tables.

  9. Computer hardware description languages - A tutorial

    NASA Technical Reports Server (NTRS)

    Shiva, S. G.

    1979-01-01

    The paper introduces hardware description languages (HDL) as useful tools for hardware design and documentation. The capabilities and limitations of HDLs are discussed along with the guidelines needed in selecting an appropriate HDL. The directions for future work are provided and attention is given to the implementation of HDLs in microcomputers.

  10. Description and Evaluation of GDEM-V 3.0

    DTIC Science & Technology

    2009-02-06

    Description and Evaluation of GDEM -V 3.0 Michael R. caRnes Ocean Sciences Branch Oceanography Division February 6, 2009 i REPORT DOCUMENTATION PAGE Form...include area code) b. ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Description and Evaluation of GDEM -V 3.0 Michael R. Carnes...unlimited. Unclassified Unclassified Unclassified UL 24 Michael R. Carnes (228) 688-5648 The GDEM (Generalized Digital Environment Model) has served as

  11. Computer-based nursing documentation in nursing homes: A feasibility study.

    PubMed

    Yu, Ping; Qiu, Yiyu; Crookes, Patrick

    2006-01-01

    The burden of paper-based nursing documentation has led to increasing complaints and decreasing job satisfaction amongst aged-care workers in Australian nursing homes. The automation of nursing documentation has been identified as one of the possible strategies to address this issue. A major obstacle to the introduction of IT solutions, however, has been a prevailing doubt concerning the ability and/or the willingness of aged-care workers to accept such innovation. This research investigates the attitudes of aged-care workers towards adopting IT innovation. Questionnaire survey were conducted in 13 nursing homes around the Illawarra and Sydney regions in Australia. The survey found that an unexpected 89.3% of participants supported the strategy of introducing electronic nursing documentation systems into residential aged-care facilities. 94.3% of them would use such a system depending on circumstances. Despite a shortage of computers in the workplace, which is a major barrier, this research provides strong evidence that care workers in residential aged-care facilities are willing to accept electronic nursing documentation practice and the uptake of information technology in residential aged-care is feasible in Australia.

  12. 77 FR 37074 - License Amendment Request From the Alan J. Blotcky Reactor Facility

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-20

    ... the Alan J. Blotcky Reactor Facility AGENCY: Nuclear Regulatory Commission. ACTION: Notice of... section of this document. FOR FURTHER INFORMATION CONTACT: Theodore Smith, Project Manager, Reactor... provided the first time that a document is referenced. The Alan J. Blotcky Reactor Facility Decommissioning...

  13. A Survey of Selected Document Processing Systems.

    ERIC Educational Resources Information Center

    Fong, Elizabeth

    In addition to reviewing the characteristics of document processing systems, this paper pays considerable attention to the description of a system via a feature list approach. The purpose of this report is to present features of the systems in parallel fashion to facilitate comparison so that a potential user may have a basis for evaluation in…

  14. 48 CFR 811.104-70 - Brand name or equal purchase descriptions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Brand name or equal... Requirements Documents 811.104-70 Brand name or equal purchase descriptions. (a) The specification writer may use purchase descriptions that contain references to one or more brand name products only in...

  15. Use of the Physician Orders for Life-Sustaining Treatment program for patients being discharged from the hospital to the nursing facility.

    PubMed

    Hickman, Susan E; Nelson, Christine A; Smith-Howell, Esther; Hammes, Bernard J

    2014-01-01

    The Physician Orders for Life-Sustaining Treatment (POLST) documents patient preferences as medical orders that transfer across settings with patients. The objectives were to pilot test methods and gather preliminary data about POLST including (1) use at time of hospital discharge, (2) transfers across settings, and (3) consistency with prior decisions. Descriptive with chart abstraction and interviews. Participants were hospitalized patients discharged to a nursing facility and/or their surrogates in La Crosse County, Wisconsin. POLST forms were abstracted from hospital records for 151 patients. Hospital and nursing facility chart data were abstracted and interviews were conducted with an additional 39 patients/surrogates. Overall, 176 patients had valid POLST forms at the time of discharge from the hospital, and many (38.6%; 68/176) only documented code status. When the whole POLST was completed, orders were more often marked as based on a discussion with the patient and/or surrogate than when the form was used just for code status (95.1% versus 13.8%, p<.001). In the follow-up and interview sample, a majority (90.6%; 29/32) of POLST forms written in the hospital were unchanged up to three weeks after nursing facility admission. Most (71.9%; 23/32) appeared consistent with patient or surrogate recall of prior treatment decisions. POLST forms generated in the hospital do transfer with patients across settings, but are often used only to document code status. POLST orders appeared largely consistent with prior treatment decisions. Further research is needed to assess the quality of POLST decisions.

  16. Idaho National Laboratory PCB Annual Document Log and Annual Records Report for calendar year 2014

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Layton, Deborah L.

    The requirements for the reporting of polychlorinated biphenyl (PCB)-related activities are found in 40 Code of Federal Regulations (CFR) 761 Subpart J, "General Records and Reports." The PCB Annual Document Log is a detailed record of the PCB waste handling activities at the facility. The facility must prepare it each year by July 1 and maintain it at the facility for at least 3 years after the facility ceases using or storing PCBs and PCB items. While submittal of the PCB Annual Document Log to the U.S. Environmental Protection Agency (EPA) is not required by regulation, EPA has verbally requestedmore » in telephone conversations that this report be submitted to them on an annual basis. The Annual Records are not required to be submitted to EPA and are not considered to be part of the Annual Document Log, but are included to provide the complete disposition history or status of all PCB activities during the year. The Annual Document Log section of this report (Section 2.0) meets the requirements of 40 CFR 761.180(a)(2), as applicable, while the Annual Records section (Section 3.0) meets the requirement of 40 CFR 761.180(a)(1).« less

  17. 30 CFR 285.115 - Documents incorporated by reference.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Documents incorporated by reference. 285.115 Section 285.115 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF General Provisions...

  18. WFF TOPEX Software Documentation Overview, May 1999. Volume 2

    NASA Technical Reports Server (NTRS)

    Brooks, Ronald L.; Lee, Jeffrey

    2003-01-01

    This document provides an overview'of software development activities and the resulting products and procedures developed by the TOPEX Software Development Team (SWDT) at Wallops Flight Facility, in support of the WFF TOPEX Engineering Assessment and Verification efforts.

  19. Research and test facilities

    NASA Technical Reports Server (NTRS)

    1993-01-01

    A description is given of each of the following Langley research and test facilities: 0.3-Meter Transonic Cryogenic Tunnel, 7-by 10-Foot High Speed Tunnel, 8-Foot Transonic Pressure Tunnel, 13-Inch Magnetic Suspension & Balance System, 14-by 22-Foot Subsonic Tunnel, 16-Foot Transonic Tunnel, 16-by 24-Inch Water Tunnel, 20-Foot Vertical Spin Tunnel, 30-by 60-Foot Wind Tunnel, Advanced Civil Transport Simulator (ACTS), Advanced Technology Research Laboratory, Aerospace Controls Research Laboratory (ACRL), Aerothermal Loads Complex, Aircraft Landing Dynamics Facility (ALDF), Avionics Integration Research Laboratory, Basic Aerodynamics Research Tunnel (BART), Compact Range Test Facility, Differential Maneuvering Simulator (DMS), Enhanced/Synthetic Vision & Spatial Displays Laboratory, Experimental Test Range (ETR) Flight Research Facility, General Aviation Simulator (GAS), High Intensity Radiated Fields Facility, Human Engineering Methods Laboratory, Hypersonic Facilities Complex, Impact Dynamics Research Facility, Jet Noise Laboratory & Anechoic Jet Facility, Light Alloy Laboratory, Low Frequency Antenna Test Facility, Low Turbulence Pressure Tunnel, Mechanics of Metals Laboratory, National Transonic Facility (NTF), NDE Research Laboratory, Polymers & Composites Laboratory, Pyrotechnic Test Facility, Quiet Flow Facility, Robotics Facilities, Scientific Visualization System, Scramjet Test Complex, Space Materials Research Laboratory, Space Simulation & Environmental Test Complex, Structural Dynamics Research Laboratory, Structural Dynamics Test Beds, Structures & Materials Research Laboratory, Supersonic Low Disturbance Pilot Tunnel, Thermal Acoustic Fatigue Apparatus (TAFA), Transonic Dynamics Tunnel (TDT), Transport Systems Research Vehicle, Unitary Plan Wind Tunnel, and the Visual Motion Simulator (VMS).

  20. 48 CFR 811.104 - Use of brand name or equal purchase descriptions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Use of brand name or equal purchase descriptions. 811.104 Section 811.104 Federal Acquisition Regulations System DEPARTMENT OF... Requirements Documents 811.104 Use of brand name or equal purchase descriptions. ...

  1. Waste Sampling & Characterization Facility (WSCF) Complex Safety Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MELOY, R.T.

    2002-04-01

    This document was prepared to analyze the Waste Sampling and Characterization Facility for safety consequences by: Determining radionuclide and highly hazardous chemical inventories; Comparing these inventories to the appropriate regulatory limits; Documenting the compliance status with respect to these limits; and Identifying the administrative controls necessary to maintain this status. The primary purpose of the Waste Sampling and Characterization Facility (WSCF) is to perform low-level radiological and chemical analyses on various types of samples taken from the Hanford Site. These analyses will support the fulfillment of federal, Washington State, and Department of Energy requirements.

  2. Overview of NORM and activities by a NORM licensed permanent decontamination and waste processing facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mirro, G.A.

    1997-02-01

    This paper presents an overview of issues related to handling NORM materials, and provides a description of a facility designed for the processing of NORM contaminated equipment. With regard to handling NORM materials the author discusses sources of NORM, problems, regulations and disposal options, potential hazards, safety equipment, and issues related to personnel protection. For the facility, the author discusses: description of the permanent facility; the operations of the facility; the license it has for handling specific radioactive material; operating and safety procedures; decontamination facilities on site; NORM waste processing capabilities; and offsite NORM services which are available.

  3. Comprehensive facilities plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1997-09-01

    The Ernest Orlando Lawrence Berkeley National Laboratory`s Comprehensive Facilities Plan (CFP) document provides analysis and policy guidance for the effective use and orderly future development of land and capital assets at the Berkeley Lab site. The CFP directly supports Berkeley Lab`s role as a multiprogram national laboratory operated by the University of California (UC) for the Department of Energy (DOE). The CFP is revised annually on Berkeley Lab`s Facilities Planning Website. Major revisions are consistent with DOE policy and review guidance. Facilities planing is motivated by the need to develop facilities for DOE programmatic needs; to maintain, replace and rehabilitatemore » existing obsolete facilities; to identify sites for anticipated programmatic growth; and to establish a planning framework in recognition of site amenities and the surrounding community. The CFP presents a concise expression of the policy for the future physical development of the Laboratory, based upon anticipated operational needs of research programs and the environmental setting. It is a product of the ongoing planning processes and is a dynamic information source.« less

  4. 7 CFR 353.8 - Accreditation of non-government facilities.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... relationship to a larger corporate entity; and (iv) A description of the specific laboratory testing or... the facility is seeking accreditation must be identified and must possess the training, education, or... inspection services for which the facility seeks accreditation, and that training, education, or experience...

  5. Characteristics and management of presumptive tuberculosis in public health facilities in Malawi, 2014-2016.

    PubMed

    Ng'ambi, W; Gugsa, S; Tweya, H; Girma, B; Kanyerere, H; Dambe, I; Babaye, Y; Mpunga, J; Phiri, S

    2017-12-21

    Setting: Public health facilities providing tuberculosis (TB) and human immunodeficiency virus (HIV) services in Malawi. Objectives: Using routinely collected health service delivery data to describe trends in HIV ascertainment and use of the Xpert ® MTB/RIF assay to diagnose TB among HIV-positive presumptive TB cases. Design: This was an implementation study of presumptive TB cases who sought care from 21 facilities between April 2014 and June 2016. Descriptive statistics were used to summarise patient, facility and service level characteristics. Results: Of 28 567 presumptive TB cases analysed, 23 198 (81%) had known HIV status. The proportion of ascertained HIV status in presumptive TB cases increased over the study period. HIV prevalence was 49%, with 73% of HIV-positive presumptive TB cases on antiretroviral therapy. Access to Xpert ranged between 37% and 63% per quarter among HIV-positive presumptive TB patients with smear-negative sputum results. Of 7829 patients with documented Xpert results, 68% were HIV-positive. Conclusion: After the introduction of registers with HIV-related variables, HIV ascertainment among presumptive TB cases increased over time. Access to Xpert was suboptimal among HIV-positive presumptive TB cases. Further collaboration between national TB and HIV programmes may facilitate increased use of Xpert for HIV-positive patients with presumptive TB who seek care in public health facilities.

  6. Event-driven management algorithm of an Engineering documents circulation system

    NASA Astrophysics Data System (ADS)

    Kuzenkov, V.; Zebzeev, A.; Gromakov, E.

    2015-04-01

    Development methodology of an engineering documents circulation system in the design company is reviewed. Discrete event-driven automatic models using description algorithms of project management is offered. Petri net use for dynamic design of projects is offered.

  7. DRI Model of the U.S. Economy -- Model Documentation

    EIA Publications

    1993-01-01

    Provides documentation on Data Resources, Inc., DRI Model of the U.S. Economy and the DRI Personal Computer Input/Output Model. It also describes the theoretical basis, structure and functions of both DRI models; and contains brief descriptions of the models and their equations.

  8. Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

    NASA Technical Reports Server (NTRS)

    Lennington, R. K.; Rassbach, M. E.

    1979-01-01

    Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

  9. An Examination of Special Focus Facility Nursing Homes

    ERIC Educational Resources Information Center

    Castle, Nicholas G.; Engberg, John

    2010-01-01

    Purpose: Nursing facilities that are determined to have a greater number of quality problems, more serious problems than average, and a demonstrated pattern of quality problems are included in the Special Focus Facility (SFF) initiative. The purpose of this research was to provide descriptive information on these SFFs and to examine the quality…

  10. Window Observational Research Facility (WORF)

    NASA Technical Reports Server (NTRS)

    Pelfrey, Joseph; Sledd, Annette

    2007-01-01

    This viewgraph document concerns the Window Observational Research Facility (WORF) Rack, a unique facility designed for use with the US Lab Destiny Module window. WORF will provide valuable resources for Earth Science payloads along with serving the purpose of protecting the lab window. The facility can be used for remote sensing instrumentation test and validation in a shirt sleeve environment. WORF will also provide a training platform for crewmembers to do orbital observations of other planetary bodies. WORF payloads will be able to conduct terrestrial studies utilizing the data collected from utilizing WORF and the lab window.

  11. Blood pressure documentation in the emergency department

    PubMed Central

    Daniel, Ana Carolina Queiroz Godoy; Machado, Juliana Pereira; Veiga, Eugenia Velludo

    2017-01-01

    ABSTRACT Objective To analyze the frequency of blood pressure documentation performed by nursing professionals in an emergency department. Methods This is a cross-sectional, observational, descriptive, and analytical study, which included medical records of adult patients admitted to the observation ward of an emergency department, between March and May 2014. Data were obtained through a collection instrument divided into three parts: patient identification, triage data, and blood pressure documentation. For statistical analysis, Pearson’s correlation coefficient was used, with a significance level of α<0.05. Results One hundred fifty-seven records and 430 blood pressure measurements were analyzed with an average of three measurements per patient. Of these measures, 46.5% were abnormal. The mean time from admission to documentation of the first blood pressure measurement was 2.5 minutes, with 42 minutes between subsequent measures. There is no correlation between the systolic blood pressure values and the mean time interval between blood pressure documentations: 0.173 (p=0.031). Conclusion The present study found no correlation between frequency of blood pressure documentation and blood pressure values. The frequency of blood pressure documentation increased according to the severity of the patient and decreased during the length of stay in the emergency department. PMID:28444085

  12. U-10Mo Baseline Fuel Fabrication Process Description

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hubbard, Lance R.; Arendt, Christina L.; Dye, Daniel F.

    This document provides a description of the U.S. High Power Research Reactor (USHPRR) low-enriched uranium (LEU) fuel fabrication process. This document is intended to be used in conjunction with the baseline process flow diagram (PFD) presented in Appendix A. The baseline PFD is used to document the fabrication process, communicate gaps in technology or manufacturing capabilities, convey alternatives under consideration, and as the basis for a dynamic simulation model of the fabrication process. The simulation model allows for the assessment of production rates, costs, and manufacturing requirements (manpower, fabrication space, numbers and types of equipment, etc.) throughout the lifecycle ofmore » the USHPRR program. This document, along with the accompanying PFD, is updated regularly« less

  13. Seamless Management of Paper and Electronic Documents for Task Knowledge Sharing

    NASA Astrophysics Data System (ADS)

    Kojima, Hiroyuki; Iwata, Ken

    Due to the progress of Internet technology and the increase of distributed information on networks, the present knowledge management has been based more and more on the performance of various experienced users. In addition to the increase of electronic documents, the use of paper documents has not been reduced because of their convenience. This paper describes a method of tracking paper document locations and contents using radio frequency identification (RFID) technology. This research also focuses on the expression of a task process and the seamless structuring of related electronic and paper documents as a result of task knowledge formalization using information organizing. A system is proposed here that implements information organization for both Web documents and paper documents with the task model description and RFID technology. Examples of a prototype system are also presented.

  14. HANDBOOK: MATERIAL RECOVERY FACILITIES FOR MUNICIPAL SOLID WASTE.

    EPA Science Inventory

    The purpose of this document is to address the technical and economic aspects of material recovery facility (MRF) equipment and technology in such a manner that the document may be of assistance to solid waste planners and engineers at the local community level. This docum...

  15. 77 FR 69870 - Federal Housing Administration (FHA) Healthcare Facility Documents: Revisions and Updates and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-21

    ... updating and revising a set of production, underwriting, asset management, closing, and other documents... clarify the requirements for a management agent and the management agreement. Production--Firm Commitments... closing documents to the Office of Management and Budget (OMB) for review and approval, and assignment of...

  16. Rear-End Crashes: Problem Size Assessment And Statistical Description

    DOT National Transportation Integrated Search

    1993-05-01

    KEYWORDS : RESEARCH AND DEVELOPMENT OR R&D, ADVANCED VEHICLE CONTROL & SAFETY SYSTEMS OR AVCSS, INTELLIGENT VEHICLE INITIATIVE OR IVI : THIS DOCUMENT PRESENTS PROBLEM SIZE ASSESSMENTS AND STATISTICAL CRASH DESCRIPTION FOR REAR-END CRASHES, INC...

  17. Mars mission science operations facilities design

    NASA Technical Reports Server (NTRS)

    Norris, Jeffrey S.; Wales, Roxana; Powell, Mark W.; Backes, Paul G.; Steinke, Robert C.

    2002-01-01

    A variety of designs for Mars rover and lander science operations centers are discussed in this paper, beginning with a brief description of the Pathfinder science operations facility and its strengths and limitations. Particular attention is then paid to lessons learned in the design and use of operations facilities for a series of mission-like field tests of the FIDO prototype Mars rover. These lessons are then applied to a proposed science operations facilities design for the 2003 Mars Exploration Rover (MER) mission. Issues discussed include equipment selection, facilities layout, collaborative interfaces, scalability, and dual-purpose environments. The paper concludes with a discussion of advanced concepts for future mission operations centers, including collaborative immersive interfaces and distributed operations. This paper's intended audience includes operations facility and situation room designers and the users of these environments.

  18. Technical Basis Document for Internal Dosimetry at Sandia National Laboratories Revision 2.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Potter, Charles A.

    2014-09-01

    The RPID Project will be implemented at all SNL facilities for activities involving the processing and/or storing of radioactive materials. This project includes activities at the Tech Area (TA) I, TA II, TA III, TA IV, TA V, Coyote Test Field, and environmental restoration sites at SNL, located in Albuquerque, New Mexico, and the Kauai Test Facility(SNL/KTF). Reference to SNL throughout this document includes facilities and activities at the Albuquerque location and at SNL/KTF.

  19. Advisory Committee on human radiation experiments. Final report, Supplemental Volume 2. Sources and documentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    This volume and its appendixes supplement the Advisory Committee`s final report by reporting how we went about looking for information concerning human radiation experiments and intentional releases, a description of what we found and where we found it, and a finding aid for the information that we collected. This volume begins with an overview of federal records, including general descriptions of the types of records that have been useful and how the federal government handles these records. This is followed by an agency-by-agency account of the discovery process and descriptions of the records reviewed, together with instructions on how tomore » obtain further information from those agencies. There is also a description of other sources of information that have been important, including institutional records, print resources, and nonprint media and interviews. The third part contains brief accounts of ACHRE`s two major contemporary survey projects (these are described in greater detail in the final report and another supplemental volume) and other research activities. The final section describes how the ACHRE information-nation collections were managed and the records that ACHRE created in the course of its work; this constitutes a general finding aid for the materials deposited with the National Archives. The appendices provide brief references to federal records reviewed, descriptions of the accessions that comprise the ACHRE Research Document Collection, and descriptions of the documents selected for individual treatment. Also included are an account of the documentation available for ACHRE meetings, brief abstracts of the almost 4,000 experiments individually described by ACHRE staff, a full bibliography of secondary sources used, and other information.« less

  20. Cutting the Cost of New Community College Facilities: Streamlining the Facilities Approval Process. Commission on Innovation Policy Discussion Paper Number 3.

    ERIC Educational Resources Information Center

    BW Associates, Berkeley, CA.

    Intended to provide background information and preliminary options for the California Community Colleges' Commission on Innovation, this document proposes that approval processes for new facilities be simplified and that restrictions on the lease or purchase of off-campus facilities be eased. Following introductory materials detailing the…

  1. Test results and facility description for a 40-kilowatt stirling engine

    NASA Technical Reports Server (NTRS)

    Kelm, G. G.; Cairelli, J. E.; Walter, R. J.

    1981-01-01

    A 40 kilowatt Stirling engine, its test support facilities, and the experimental procedures used for these tests are described. Operating experience with the engine is discussed, and some initial test results are presented

  2. Designing for Education: Compendium of Exemplary Educational Facilities 2011

    ERIC Educational Resources Information Center

    OECD Publishing (NJ3), 2011

    2011-01-01

    "Designing for Education: Compendium of Exemplary Educational Facilities 2011" showcases over 60 recently built or refurbished educational facilities from 28 countries. Collectively, these projects demonstrate state-of-the-art design in this field and each one is lavishly illustrated with colour photos, plans and descriptions. [A free PDF is…

  3. Specifying Skill-Based Training Strategies and Devices: A Model Description

    DTIC Science & Technology

    1990-06-01

    Technical Report 897 Specifying Skill-Based Training N Strategies and Devices: A Model Description I Paui J. Sticha and Mark Schlager Human Resources...unlimied 90 ’ Technical Report 897 Specifying Skill-Based Training Strategies and Devices: A Model Description Paul J. Sticha and Mark Schlager Human...SECURITY CLASSIFICATION OF THIS PAGE Form Approved REPORT DOCUMENTATION PAGE FMNo o7 ote la. REPORT SECURITY CLASSIFICATION lb. RESTRICTWE MARKINGS

  4. Electronic health record systems in ophthalmology: impact on clinical documentation.

    PubMed

    Sanders, David S; Lattin, Daniel J; Read-Brown, Sarah; Tu, Daniel C; Wilson, David J; Hwang, Thomas S; Morrison, John C; Yackel, Thomas R; Chiang, Michael F

    2013-09-01

    , the EHR systems documented clinical findings using textual descriptions and interpretations. There were quantitative and qualitative differences in the nature of paper versus EHR documentation of ophthalmic findings in this study. The EHR notes included more complete documentation of examination elements using structured textual descriptions and interpretations, whereas paper notes used graphical representations of findings. The author(s) have no proprietary or commercial interest in any materials discussed in this article. Copyright © 2013 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

  5. Public Involvement Opportunities for the DUF6 Conversion Facility EISs

    Science.gov Websites

    and Uses DUF6 Conversion EIS Documents News FAQs Internet Resources Glossary Home » Conversion Management | DUF6 Conversion Facility EISs | Documents News | FAQs | Internet Resources | Glossary Help

  6. Characteristics and management of presumptive tuberculosis in public health facilities in Malawi, 2014–2016

    PubMed Central

    Gugsa, S.; Tweya, H.; Girma, B.; Kanyerere, H.; Dambe, I.; Babaye, Y.; Mpunga, J.; Phiri, S.

    2017-01-01

    Setting: Public health facilities providing tuberculosis (TB) and human immunodeficiency virus (HIV) services in Malawi. Objectives: Using routinely collected health service delivery data to describe trends in HIV ascertainment and use of the Xpert® MTB/RIF assay to diagnose TB among HIV-positive presumptive TB cases. Design: This was an implementation study of presumptive TB cases who sought care from 21 facilities between April 2014 and June 2016. Descriptive statistics were used to summarise patient, facility and service level characteristics. Results: Of 28 567 presumptive TB cases analysed, 23 198 (81%) had known HIV status. The proportion of ascertained HIV status in presumptive TB cases increased over the study period. HIV prevalence was 49%, with 73% of HIV-positive presumptive TB cases on antiretroviral therapy. Access to Xpert ranged between 37% and 63% per quarter among HIV-positive presumptive TB patients with smear-negative sputum results. Of 7829 patients with documented Xpert results, 68% were HIV-positive. Conclusion: After the introduction of registers with HIV-related variables, HIV ascertainment among presumptive TB cases increased over time. Access to Xpert was suboptimal among HIV-positive presumptive TB cases. Further collaboration between national TB and HIV programmes may facilitate increased use of Xpert for HIV-positive patients with presumptive TB who seek care in public health facilities. PMID:29584793

  7. Public Involvement Opportunities for the DUF6 Conversion Facility EISs

    Science.gov Websites

    and Uses DUF6 Conversion EIS Documents News FAQs Internet Resources Glossary Home » Conversion | DU Uses | DUF6 Management | DUF6 Conversion Facility EISs | Documents News | FAQs | Internet

  8. Semantic Metadata for Heterogeneous Spatial Planning Documents

    NASA Astrophysics Data System (ADS)

    Iwaniak, A.; Kaczmarek, I.; Łukowicz, J.; Strzelecki, M.; Coetzee, S.; Paluszyński, W.

    2016-09-01

    Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa). The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

  9. Technical and Regulatory Guidance Document for Constructed Treatment Wetlands

    DTIC Science & Technology

    2003-12-01

    leachate and acid mine drainage. The purpose of this document is to provide technical and regulatory guidance to help regulators, industry, consultants...Contaminants at Industrial Facilities .....................41 Table 4-12 Typical Landfill Leachate Characteristics and Removal Efficiencies...43 Table 4-14 Landfill Leachate Characteristics

  10. 7 CFR 3405.9 - Use of funds for facilities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program Description § 3405.9 Use of funds for facilities. Under the Higher Education Challenge Grants Program, the use... 7 Agriculture 15 2010-01-01 2010-01-01 false Use of funds for facilities. 3405.9 Section 3405.9...

  11. Executive overview and introduction to the SMAP information system life-cycle and documentation standards

    NASA Technical Reports Server (NTRS)

    1989-01-01

    An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.

  12. 1 CFR 20.4 - Description of program activities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 1 General Provisions 1 2010-01-01 2010-01-01 false Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS § 20.4...

  13. Developing a national role description for medical directors in long-term care: survey-based approach.

    PubMed

    Rahim-Jamal, Sherin; Quail, Patrick; Bhaloo, Tajudaullah

    2010-01-01

    To develop a national role description for medical directors in long-term care (LTC) based on role functions drawn from the literature and the LTC industry. A questionnaire about the role functions identified from the literature was mailed or e-mailed to randomly selected medical directors, directors of care or nursing (DOCs), and administrators in LTC facilities. Long-term care facilities in Canada randomly selected from regional clusters. Medical directors, DOCs, and administrators in LTC facilities; a national advisory group of medical directors from the Long Term Care Medical Directors Association of Canada; and a volunteer group of medical directors. Respondents were asked to indicate, from the list of identified functions, 1) whether medical directors spent any time on each activity; 2) whether medical directors should spend time on each activity; and 3) if medical directors should spend time on an activity, whether the activity was "essential" or "desirable." An overall response rate of 37% was obtained. At least 80% of the respondents from all 3 groups (medical directors, DOCs, and administrators) highlighted 24 functions they deemed to be "essential" or "desirable," which were then included in the role description. In addition, the advisory group expanded the role description to include 5 additional responsibilities from the remaining 18 functions originally identified. A volunteer group of medical directors confirmed the resulting role description. The role description developed as a result of this study brings clarity to the medical director's role in Canadian LTC facilities; the functions outlined are considered important for medical directors to undertake. The role description could be a useful tool in negotiations pertaining to time commitment and expectations of a medical director and fair compensation for services rendered.

  14. Title list of documents made publicly available. Volume 17, No. 10

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.

  15. Benzene waste operations NESHAP. Waiver guidance document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1993-01-01

    Subpart FF of 40 CFR Part 61 addresses benzene emissions from waste operations at petroleum refineries, chemical manufacturing plants, coke by-product plants, and waste management units that manage wastes from these facilities. Subpart FF, also known as the benzene waste operations national emission standards for hazardous air pollutants (NESHAP), was amended and published in the Federal Register on January 7, 1993. Facilities unable to comply with the NESHAP by April 7, 1993, may apply for a waiver of compliance for a period that shall not extend beyond January 7, 1995. As a condition of the waiver, facilities will be requiredmore » to mitigate benzene air emissions that result from the delay in compliance with the NESHAP. The document outlines the goals and objectives of the benzene waste NESHAP waiver policy, and provides guidance for preparing, reviewing and evaluating waiver requests.« less

  16. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  17. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  18. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  19. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  20. Orbital operations study. Appendix C: Data sources and vehicle descriptions

    NASA Technical Reports Server (NTRS)

    Steinwachs, W. L.

    1972-01-01

    A bibliography of published documents referred to throughout the orbital operations study is presented. A brief description of all of the space program elements included in the study vehicle inventory is developed.

  1. Management plan documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 2

    NASA Technical Reports Server (NTRS)

    Callender, E. David; Steinbacher, Jody

    1989-01-01

    This is the second of five volumes of the Information System Life-Cycle and Documentation Standards. This volume provides a well-organized, easily used standard for management plans used in acquiring, assuring, and developing information systems and software, hardware, and operational procedures components, and related processes.

  2. 36 CFR 1234.10 - What are the facility requirements for all records storage facilities?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... the HVAC systems, fire alarm and fire protection systems. Manual switching between sources of service... elements are protected by a properly installed, properly maintained wet-pipe automatic sprinkler system, as... must provide documentation that the facility has a fire suppression system specifically designed to...

  3. 42 CFR 456.141 - Purpose and general description.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... care evaluation studies— (1) Emphasize identification and analysis of patterns of patient care; and (2...: Medical Care Evaluation Studies § 456.141 Purpose and general description. (a) The purpose of medical care evaluation studies is to promote the most effective and efficient use of available health facilities and...

  4. 42 CFR 456.141 - Purpose and general description.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... care evaluation studies— (1) Emphasize identification and analysis of patterns of patient care; and (2...: Medical Care Evaluation Studies § 456.141 Purpose and general description. (a) The purpose of medical care evaluation studies is to promote the most effective and efficient use of available health facilities and...

  5. Space Power Facility Reverberation Chamber Calibration Report

    NASA Technical Reports Server (NTRS)

    Lewis, Catherine C.; Dolesh, Robert J.; Garrett, Michael J.

    2014-01-01

    This document describes the process and results of calibrating the Space Environmental Test EMI Test facility at NASA Plum Brook Space Power Facility according to the specifications of IEC61000-4-21 for susceptibility testing from 100 MHz to 40 GHz. The chamber passed the field uniformity test, in both the empty and loaded conditions, making it the world's largest Reverberation Chamber.

  6. Environmental resource document for the Idaho National Engineering Laboratory. Volume 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Irving, J.S.

    This document contains information related to the environmental characterization of the Idaho National Engineering Laboratory (INEL). The INEL is a major US Department of Energy facility in southeastern Idaho dedicated to nuclear research, waste management, environmental restoration, and other activities related to the development of technology. Environmental information covered in this document includes land, air, water, and ecological resources; socioeconomic characteristics and land use; and cultural, aesthetic, and scenic resources.

  7. ETF Mission Statement document. ETF Design Center team

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1980-04-01

    The Mission Statement document describes the results, activities, and processes used in preparing the Mission Statement, facility characteristics, and operating goals for the Engineering Test Facility (ETF). Approximately 100 engineers and scientists from throughout the US fusion program spent three days at the Knoxville Mission Workshop defining the requirements that should be met by the ETF during its operating life. Seven groups were selected to consider one major category each of design and operation concerns. Each group prepared the findings of the assigned area as described in the major sections of this document. The results of the operations discussed mustmore » provide the data, knowledge, experience, and confidence to continue to the next steps beyond the ETF in making fusion power a viable energy option. The results from the ETF mission (operations are assumed to start early in the 1990's) are to bridge the gap between the base of magnetic fusion knowledge at the start of operations and that required to design the EPR/DEMO devices.« less

  8. 40 CFR 62.14424 - What documentation must I maintain onsite?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false What documentation must I maintain onsite? 62.14424 Section 62.14424 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... under this subpart; (2) Description of basic combustion theory applicable to an HMIWI; (3) Procedures...

  9. Lightning and surge protection, grounding, bonding and shielding requirements for facilities and electronic equipment

    DOT National Transportation Integrated Search

    2002-08-09

    This document mandates standard lightning protection, transient protection, electrostatic discharge (ESD), grounding, bonding and shielding configurations and procedures for new facilities, facility modifications, facility up grades, new equipment in...

  10. Survey of referring veterinarians' perceptions of and reasons for referring patients to rehabilitation facilities.

    PubMed

    Alvarez, Leilani X; Fox, Philip R; Van Dyke, Janet B; Grigsby, Patrick

    2016-10-01

    OBJECTIVE To identify patterns of referral to US small animal rehabilitation facilities, document referring veterinarians' perceptions of rehabilitation services, and examine factors that encouraged and impeded referral of veterinary patients to rehabilitation facilities. DESIGN Cross-sectional survey. SAMPLE 461 completed surveys. PROCEDURES Referral lists were obtained from 9 US rehabilitation facilities, and surveys were emailed or mailed to 2, 738 veterinarians whose names appeared on those lists. Data obtained from respondents were used to generate descriptive statistics and perform χ(2) tests to determine patterns for referral of patients to rehabilitation facilities. RESULTS 461 surveys were completed and returned, resulting in a response rate of 16.8%. The margin of error was < 5% for all responses. Most respondents (324/461 [70.3%]) had referred patients for postoperative rehabilitation therapy. Respondents ranked neurologic disorder as the condition they would most likely consider for referral for future rehabilitation therapy. The most frequently cited reason for not referring a patient for rehabilitation therapy was perceived cost (251/461 [54.4%]) followed by distance to a rehabilitation facility (135/461 [29.3%]). Specialists were more likely than general practitioners to refer patients for rehabilitation therapy. The majority (403/461 [87.4%]) of respondents felt that continuing education in the field of veterinary rehabilitation was lacking. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated a need for continuing education in small animal rehabilitation for veterinarians. Improved knowledge of rehabilitation therapy will enable veterinarians to better understand and more specifically communicate indications and benefits for pets receiving this treatment modality.

  11. Concept document of the repository-based software engineering program: A constructive appraisal

    NASA Technical Reports Server (NTRS)

    1992-01-01

    A constructive appraisal of the Concept Document of the Repository-Based Software Engineering Program is provided. The Concept Document is designed to provide an overview of the Repository-Based Software Engineering (RBSE) Program. The Document should be brief and provide the context for reading subsequent requirements and product specifications. That is, all requirements to be developed should be traceable to the Concept Document. Applied Expertise's analysis of the Document was directed toward assuring that: (1) the Executive Summary provides a clear, concise, and comprehensive overview of the Concept (rewrite as necessary); (2) the sections of the Document make best use of the NASA 'Data Item Description' for concept documents; (3) the information contained in the Document provides a foundation for subsequent requirements; and (4) the document adequately: identifies the problem being addressed; articulates RBSE's specific role; specifies the unique aspects of the program; and identifies the nature and extent of the program's users.

  12. Mexico: Centro de Documentacion e Informacion Educativa. Seminario de Documentacion e Informacion Pedagogica en America Latina (The Mexican Center for Educational Documentation and Information. Working Paper for the Seminar on Educational Documentation and Information in Latin America).

    ERIC Educational Resources Information Center

    Secretaria de Educacion Publica, Mexico City (Mexico). Centro de Documentacion e Informacion Educativa.

    This document describes the Center for Documentation and Educational Information in Mexico City. Background information on similar services in Mexico is provided and a detailed description of the Center is presented, covering organization, objectives, administration, users, activities, services, and publications. (VM)

  13. Documents Pertaining to Resource Conservation and Recovery Act Corrective Action Event Codes

    EPA Pesticide Factsheets

    Document containing RCRA Corrective Action event codes and definitions, including national requirements, initiating sources, dates, and guidance, from the first facility assessment until the Corrective Action is terminated.

  14. CARRIER PREPARATION BUILDING MATERIALS HANDLING SYSTEM DESCRIPTION DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    E.F. Loros

    2000-06-28

    . The Carrier Preparation Building Materials Handling System interfaces with the Cask/Carrier Transport System to move the carriers to and from the system. The Carrier Preparation Building System houses the equipment and provides the facility, utility, safety, communications, and auxiliary systems supporting operations and protecting personnel.« less

  15. Model documentation report: Transportation sector model of the National Energy Modeling System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1994-03-01

    This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Transportation Model (TRAN). The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated by the model. This document serves three purposes. First, it is a reference document providing a detailed description of TRAN for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports (Public Law 93-275, 57(b)(1)). Third, it permits continuity inmore » model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements.« less

  16. 30 CFR 780.38 - Support facilities.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS SURFACE MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 780.38... description, plans, and drawings for each support facility to be constructed, used, or maintained within the...

  17. 30 CFR 784.30 - Support facilities.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS UNDERGROUND MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 784.30... description, plans, and drawings for each support facility to be constructed, used, or maintained within the...

  18. Supporting Documents for the Public Notice for Hydrodec of North America, LLC

    EPA Pesticide Factsheets

    These files make up the supporting documents for the Hydrodec application requesting to be able to continue operating as an alternative treatment and commercial polychlorinated biphenyl (PCB) storage facility.

  19. General Air Quality Permit Request for Coverage: US Silica - Parshall Transload Facility

    EPA Pesticide Factsheets

    Documents related to Request for Coverage under Stone Quarrying, Crushing, and Screening Facilities General Permit Indian Reservation, US Silica, Parshall Transload Facility, Fort Berthold Indian Reservation, North Dakota.

  20. A Combinatorial Geometry Computer Description of the XR311 Vehicle

    DTIC Science & Technology

    1978-04-01

    cards or magnetic tape. The shot line output of the GRID subroutine of the GIFT code is also stored on magnetic tape for future vulnera- bility...descriptions as processed by the Geometric Information For Targets ( GIFT )2 computer code. This report documents the COM-GEOM target description for all...72, March 1974. ’L.W. Bains and M.J. Reisinger, "The GIFT Code User Manual, VOL 1, Introduction and Input Requirements, " Ballistic Research

  1. Langley Atmospheric Information Retrieval System (LAIRS): System description and user's guide

    NASA Technical Reports Server (NTRS)

    Boland, D. E., Jr.; Lee, T.

    1982-01-01

    This document presents the user's guide, system description, and mathematical specifications for the Langley Atmospheric Information Retrieval System (LAIRS). It also includes a description of an optimal procedure for operational use of LAIRS. The primary objective of the LAIRS Program is to make it possible to obtain accurate estimates of atmospheric pressure, density, temperature, and winds along Shuttle reentry trajectories for use in postflight data reduction.

  2. Earth and environmental science in the 1980's: Part 1: Environmental data systems, supercomputer facilities and networks

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Overview descriptions of on-line environmental data systems, supercomputer facilities, and networks are presented. Each description addresses the concepts of content, capability, and user access relevant to the point of view of potential utilization by the Earth and environmental science community. The information on similar systems or facilities is presented in parallel fashion to encourage and facilitate intercomparison. In addition, summary sheets are given for each description, and a summary table precedes each section.

  3. Space Communications Emulation Facility

    NASA Technical Reports Server (NTRS)

    Hill, Chante A.

    2004-01-01

    Establishing space communication between ground facilities and other satellites is a painstaking task that requires many precise calculations dealing with relay time, atmospheric conditions, and satellite positions, to name a few. The Space Communications Emulation Facility (SCEF) team here at NASA is developing a facility that will approximately emulate the conditions in space that impact space communication. The emulation facility is comprised of a 32 node distributed cluster of computers; each node representing a satellite or ground station. The objective of the satellites is to observe the topography of the Earth (water, vegetation, land, and ice) and relay this information back to the ground stations. Software originally designed by the University of Kansas, labeled the Emulation Manager, controls the interaction of the satellites and ground stations, as well as handling the recording of data. The Emulation Manager is installed on a Linux Operating System, employing both Java and C++ programming codes. The emulation scenarios are written in extensible Markup Language, XML. XML documents are designed to store, carry, and exchange data. With XML documents data can be exchanged between incompatible systems, which makes it ideal for this project because Linux, MAC and Windows Operating Systems are all used. Unfortunately, XML documents cannot display data like HTML documents. Therefore, the SCEF team uses XML Schema Definition (XSD) or just schema to describe the structure of an XML document. Schemas are very important because they have the capability to validate the correctness of data, define restrictions on data, define data formats, and convert data between different data types, among other things. At this time, in order for the Emulation Manager to open and run an XML emulation scenario file, the user must first establish a link between the schema file and the directory under which the XML scenario files are saved. This procedure takes place on the command

  4. Sandia National Laboratories/New Mexico Environmental Information Document - Volume 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BAYLISS, LINDA S.; GUERRERO, JOSEPH V.; JOHNS, WILLIAM H.

    This Sandia National Laboratories/New Mexico Environmental Information Document (EID) compiles information on the existing environment, or environmental baseline, for SNUNM. Much of the information is drawn from existing reports and databases supplemented by new research and data. The SNL/NM EID, together with the Sandia National Laboratories/New Mexico Facilities and Safety Information Document, provide a basis for assessing the environment, safety, and health aspects of operating selected facilities at SNL/NM. The environmental baseline provides a record of the existing physical, biological, and socioeconomic environment at SNL/NLM prior to being altered (beneficially or adversely) by proposed programs or projects. More specifically, themore » EID provides information on the following topics: Geology; Land Use; Hydrology and Water Resources; Air Quality and Meteorology; Ecology; Noise and Vibration; Cultural Resources; Visual Resources; Socioeconomic and Community Services; Transportation; Material Management; Waste Management; and Regulatory Requirements.« less

  5. Document similarity measures and document browsing

    NASA Astrophysics Data System (ADS)

    Ahmadullin, Ildus; Fan, Jian; Damera-Venkata, Niranjan; Lim, Suk Hwan; Lin, Qian; Liu, Jerry; Liu, Sam; O'Brien-Strain, Eamonn; Allebach, Jan

    2011-03-01

    Managing large document databases is an important task today. Being able to automatically com- pare document layouts and classify and search documents with respect to their visual appearance proves to be desirable in many applications. We measure single page documents' similarity with respect to distance functions between three document components: background, text, and saliency. Each document component is represented as a Gaussian mixture distribution; and distances between dierent documents' components are calculated as probabilistic similarities between corresponding distributions. The similarity measure between documents is represented as a weighted sum of the components' distances. Using this document similarity measure, we propose a browsing mechanism operating on a document dataset. For these purposes, we use a hierarchical browsing environment which we call the document similarity pyramid. It allows the user to browse a large document dataset and to search for documents in the dataset that are similar to the query. The user can browse the dataset on dierent levels of the pyramid, and zoom into the documents that are of interest.

  6. Core commands across airway facilities systems.

    DOT National Transportation Integrated Search

    2003-05-01

    This study takes a high-level approach to evaluate computer systems without regard to the specific method of : interaction. This document analyzes the commands that Airway Facilities (AF) use across different systems and : the meanings attributed to ...

  7. Biotechnology System Facility: Risk Mitigation on Mir

    NASA Technical Reports Server (NTRS)

    Gonda, Steve R., III; Galloway, Steve R.

    2003-01-01

    NASA is working with its international partners to develop space vehicles and facilities that will give researchers the opportunity to conduct scientific investigations in space. As part of this activity, NASA's Biotechnology Cell Science Program (BCSP) at the Johnson Space Center (JSC) is developing a world-class biotechnology laboratory facility for the International Space Station (ISS). This report describes the BCSP, including the role of the BTS. We identify the purpose and objectives of the BTS and a detailed description of BTS facility design and operational concept, BTS facility and experiment-specific hardware, and scientific investigations conducted in the facility. We identify the objectives, methods, and results of risk mitigation investigations of the effects of microgravity and cosmic radiation on the BTS data acquisition and control system. These results may apply to many other space experiments that use commercial, terrestrial-based data acquisition technology. Another focal point is a description of the end-to-end process of integrating and operating biotechnology experiments on a variety of space vehicles. The identification of lessons learned that can be applied to future biotechnology experiments is an overall theme of the report. We include a brief summary of the science results, but this is not the focus of the report. The report provides some discussion on the successful 130-day tissue engineering experiment performed in BTS on Mir and describes a seminal gene array investigation that identified a set of unique genes that are activated in space.

  8. Skylab 2 facilities and environmental measurements program

    NASA Technical Reports Server (NTRS)

    1972-01-01

    A list of the facilities and environmental measurements to be monitored in support of the Skylab 2 vehicle is presented. The data include measurement identification number, description, transducer operating range, recorder type, and drawings illustrating measurement location.

  9. Description and calibration of the Langley Hypersonic CF4 tunnel: A facility for simulating low gamma flow as occurs for a real gas

    NASA Technical Reports Server (NTRS)

    Midden, Raymond E.; Miller, Charles G., III

    1985-01-01

    The Langley Hypersonic CF4 Tunnel is a Mach 6 facility which simulates an important aspect of dissociative real-gas phenomena associated with the reentry of blunt vehicles, i.e., the decrease in the ratio of specific heats (gamma) that occurs within the shock layer of the vehicle. A general description of this facility is presented along with a discussion of the basic components, instrumentation, and operating procedure. Pitot-pressure surveys were made at the nozzle exit and downstream of the exit for reservoir temperatures from 1020 to 1495 R and reservoir pressures from 1000 to 2550 psia. A uniform test core having a diameter of circa 11 in. (0.55 times the nozzle-exit diameter) exists at the maximum value of reservoir pressure and temperature. The corresponding free-stream Mach number is 5.9, the unit Reynolds number is 4 x 10 to the 5th power per foot, the ratio of specific heats immediately behind a normal shock is 1.10, and the normal-shock density ratio is 12.6. When the facility is operated at reservoir temperatures below 1440 R, irregularities occur in the pitot-pressure profile within a small region about the nozzle centerline. These variations in pitot pressure indicate the existence of flow distrubances originating in the upstream region of the nozzle. This necessitates testing models off centerline in the uniform flow between the centerline region and either the nozzle boundary layer or the lip shock originating at the nozzle exit. Samples of data obtained in this facility with various models are presented to illustrate the effect of gamma on flow conditions about the model and the importance of knowing the magnitude of this effect.

  10. Experimental Fuels Facility Re-categorization Based on Facility Segmentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Reiss, Troy P.; Andrus, Jason

    The Experimental Fuels Facility (EFF) (MFC-794) at the Materials and Fuels Complex (MFC) located on the Idaho National Laboratory (INL) Site was originally constructed to provide controlled-access, indoor storage for radiological contaminated equipment. Use of the facility was expanded to provide a controlled environment for repairing contaminated equipment and characterizing, repackaging, and treating waste. The EFF facility is also used for research and development services, including fuel fabrication. EFF was originally categorized as a LTHC-3 radiological facility based on facility operations and facility radiological inventories. Newly planned program activities identified the need to receive quantities of fissionable materials in excessmore » of the single parameter subcritical limit in ANSI/ANS-8.1, “Nuclear Criticality Safety in Operations with Fissionable Materials Outside Reactors” (identified as “criticality list” quantities in DOE-STD-1027-92, “Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports,” Attachment 1, Table A.1). Since the proposed inventory of fissionable materials inside EFF may be greater than the single parameter sub-critical limit of 700 g of U-235 equivalent, the initial re-categorization is Hazard Category (HC) 2 based upon a potential criticality hazard. This paper details the facility hazard categorization performed for the EFF. The categorization was necessary to determine (a) the need for further safety analysis in accordance with LWP-10802, “INL Facility Categorization,” and (b) compliance with 10 Code of Federal Regulations (CFR) 830, Subpart B, “Safety Basis Requirements.” Based on the segmentation argument presented in this paper, the final hazard categorization for the facility is LTHC-3. Department of Energy Idaho (DOE-ID) approval of the final hazard categorization determined by this hazard assessment document (HAD) was required

  11. Advanced Transport Operating System (ATOPS) color displays software description microprocessor system

    NASA Technical Reports Server (NTRS)

    Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

    1992-01-01

    This document describes the software created for the Sperry Microprocessor Color Display System used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global reference section includes procedures and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight cathode ray tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

  12. Making automated computer program documentation a feature of total system design

    NASA Technical Reports Server (NTRS)

    Wolf, A. W.

    1970-01-01

    It is pointed out that in large-scale computer software systems, program documents are too often fraught with errors, out of date, poorly written, and sometimes nonexistent in whole or in part. The means are described by which many of these typical system documentation problems were overcome in a large and dynamic software project. A systems approach was employed which encompassed such items as: (1) configuration management; (2) standards and conventions; (3) collection of program information into central data banks; (4) interaction among executive, compiler, central data banks, and configuration management; and (5) automatic documentation. A complete description of the overall system is given.

  13. Open Source Patient-Controlled Analgesic Pump Requirements Documentation

    PubMed Central

    Larson, Brian R.; Hatcliff, John; Chalin, Patrice

    2014-01-01

    The dynamic nature of the medical domain is driving a need for continuous innovation and improvement in techniques for developing and assuring medical devices. Unfortunately, research in academia and communication between academics, industrial engineers, and regulatory authorities is hampered by the lack of realistic non-proprietary development artifacts for medical devices. In this paper, we give an overview of a detailed requirements document for a Patient-Controlled Analgesic (PCA) pump developed under the US NSF’s Food and Drug Administration (FDA) Scholar-in-Residence (SIR) program. This 60+ page document follows the methodology outlined in the US Federal Aviation Administrations (FAA) Requirements Engineering Management Handbook (REMH) and includes a domain overview, use cases, statements of safety & security requirements, and formal top-level system architectural description. Based on previous experience with release of a requirements document for a cardiac pacemaker that spawned a number of research and pedagogical activities, we believe that the described PCA requirements document can be an important research enabler within the formal methods and software engineering communities. PMID:24931440

  14. Quality improvement nursing facilities: a nursing leadership perspective.

    PubMed

    Adams-Wendling, Linda; Lee, Robert

    2005-11-01

    The purposes of this study were to characterize the state of quality improvement (QI) in nursing facilities and to identify barriers to improvement from nursing leaders' perspectives. The study employed a non-experimental descriptive design, using closed- and open-ended survey questions in a sample of 51 nursing facilities in a midwestern state. Only two of these facilities had active QI programs. Furthermore, turnover and limited training among these nursing leaders represented major barriers to rapid implementation of such programs. This study is consistent with earlier findings that QI programs are limited in nursing homes.

  15. Description of the Use of Greenhouse Facilities by Secondary Agricultural Education Instructors in Arizona

    ERIC Educational Resources Information Center

    Franklin, Edward A.

    2008-01-01

    The purpose of this study was to determine the status and use of greenhouse laboratory facilities by secondary agricultural education instructors in Arizona. Specific objectives were to determine the number of programs with operating greenhouses, types of operating systems, how the facilities are used in the local program, level of preparation of…

  16. Hanford facility dangerous waste permit application, PUREX storage tunnels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Haas, C. R.

    1997-09-08

    The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, `operating` treatment, storage, and/or disposal units, such as the PUREX Storage Tunnels (this document, DOE/RL-90-24).

  17. 75 FR 54627 - Best Management Practices for Unused Pharmaceuticals at Health Care Facilities

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-08

    ... at Health Care Facilities AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA... Unused Pharmaceuticals at Health Care Facilities. The guidance is targeted at hospitals, medical clinics... drafted a guidance document for health care facilities, which describes: Techniques for reducing or...

  18. 40 CFR 421.320 - Applicability: Description of the secondary uranium subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... secondary uranium subcategory. 421.320 Section 421.320 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Uranium Subcategory § 421.320 Applicability: Description of the secondary uranium... uranium (including depleted uranium) by secondary uranium facilities. ...

  19. 40 CFR 421.320 - Applicability: Description of the secondary uranium subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... secondary uranium subcategory. 421.320 Section 421.320 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Uranium Subcategory § 421.320 Applicability: Description of the secondary uranium... uranium (including depleted uranium) by secondary uranium facilities. ...

  20. 40 CFR 421.320 - Applicability: Description of the secondary uranium subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... secondary uranium subcategory. 421.320 Section 421.320 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Uranium Subcategory § 421.320 Applicability: Description of the secondary uranium... uranium (including depleted uranium) by secondary uranium facilities. ...

  1. 40 CFR 421.320 - Applicability: Description of the secondary uranium subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... secondary uranium subcategory. 421.320 Section 421.320 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Uranium Subcategory § 421.320 Applicability: Description of the secondary uranium... uranium (including depleted uranium) by secondary uranium facilities. ...

  2. 40 CFR 421.320 - Applicability: Description of the secondary uranium subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... secondary uranium subcategory. 421.320 Section 421.320 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Uranium Subcategory § 421.320 Applicability: Description of the secondary uranium... uranium (including depleted uranium) by secondary uranium facilities. ...

  3. Space Transportation and Destination Facilities

    NASA Technical Reports Server (NTRS)

    Smitherman, David; McClure, Wallace

    1999-01-01

    The Space Transportation and Destination Facilities section focused on space transportation vehicles-from use of existing vehicles to development of specialized transports-and on space stations, space business parks, space hotels, and other facilities in space of the kind that eventually would provide services for general public space travel (PST) and tourism. For both transportation and destination facilities, the emphasis was on the identification of various strategies to enable a realistic incremental progression in the development and acquisition of such facilities, and the identification of issues that need resolution to enable formation of viable businesses. The approach was to determine the best: (1) Strategies for general PST and tourism development through the description and analysis of a wide range of possible future scenarios. With these scenarios in mind the section then identified. (2) Key issues to be explored. (3) opportunities to eliminate barriers. (4) Recommendations for future actions. (5) Top-level requirements and characteristics for general PST and tourism systems and services that would guide the development of transportation and destination facilities.

  4. A low-density boundary-layer wind tunnel facility

    NASA Technical Reports Server (NTRS)

    White, B. R.

    1987-01-01

    This abstract describes a low-density wind-tunnel facility that was established at NASA Ames in order to aid interpretation and understanding of data received from the Mariner and Viking spacecraft through earth-based simulation. The wind tunnel is a boundary-layer type which is capable of operating over a range of air densities ranging from 0.01 to 1.24 kg/cu m, with the lower values being equivalent to the near-surface density of the planet Mars. Although the facility was developed for space and extraterrestrial simulation, it also can serve as a relatively large-scale, low-density aerodynamic test facility. A description of this unique test facility and some Pitot-tube and hot-wire anemometry data acquired in the facility are presented.

  5. Delivering information: a descriptive study of Australian women's information needs for decision-making about birth facility.

    PubMed

    Thompson, Rachel; Wojcieszek, Aleena M

    2012-06-18

    Little information is known about what information women want when choosing a birth facility. The objective of this study was to inform the development of a consumer decision support tool about birth facility by identifying the information needs of maternity care consumers in Queensland, Australia. Participants were 146 women residing in both urban and rural areas of Queensland, Australia who were pregnant and/or had recently given birth. A cross-sectional survey was administered in which participants were asked to rate the importance of 42 information items to their decision-making about birth facility. Participants could also provide up to ten additional information items of interest in an open-ended question. On average, participants rated 30 of the 42 information items as important to decision-making about birth facility. While the majority of information items were valued by most participants, those related to policies about support people, other women's recommendations about the facility, freedom to choose one's preferred position during labour and birth, the aesthetic quality of the facility, and access to on-site neonatal intensive care were particularly widely valued. Additional items of interest frequently focused on postnatal care and support, policies related to medical intervention, and access to water immersion. The women surveyed had significant and diverse information needs for decision-making about birth facility. These findings have immediate applications for the development of decision support tools about birth facility, and highlight the need for tools which provide a large volume of information in an accessible and user-friendly format. These findings may also be used to guide communication and information-sharing by care providers involved in counselling pregnant women and families about their options for birth facility or providing referrals to birth facilities.

  6. Podiatric Medical Education: The Physical Facilities.

    ERIC Educational Resources Information Center

    Rubin, Abe

    1979-01-01

    A gross inventory of the teaching and clinical learning resources of the five U.S. colleges of podiatric medicine is described. A descriptive breakdown is provided along with illustrations of facilities. Some categories included in space allocation data are instructional staff, administrative staff, laboratory, outpatient clinic, learning…

  7. Facilities Data System Manual.

    ERIC Educational Resources Information Center

    Acridge, Charles W.; Ford, Tim M.

    The purposes of this manual are to set forth the scope and procedures for the maintenance and operation of the University of California facilities Data System (FDX) and to serve as a reference document for users of the system. FDX is an information system providing planning and management data about the existing physical plant. That is, it…

  8. Skylab materials processing facility experiment developer's report

    NASA Technical Reports Server (NTRS)

    Parks, P. G.

    1975-01-01

    The development of the Skylab M512 Materials Processing Facility is traced from the design of a portable, self-contained electron beam welding system for terrestrial applications to the highly complex experiment system ultimately developed for three Skylab missions. The M512 experiment facility was designed to support six in-space experiments intended to explore the advantages of manufacturing materials in the near-zero-gravity environment of Earth orbit. Detailed descriptions of the M512 facility and related experiment hardware are provided, with discussions of hardware verification and man-machine interfaces included. An analysis of the operation of the facility and experiments during the three Skylab missions is presented, including discussions of the hardware performance, anomalies, and data returned to earth.

  9. The Apollo experiment for document delivery via satellite communication

    NASA Astrophysics Data System (ADS)

    1985-03-01

    Dutch participation possibilities in the Apollo document delivery project, wishes and idea's of potential user and tender groups, and plans and activities of Dutch institutes and companies, are surveyed. The Apollo storage and transport system, demand and administration network, potential markets, and subject areas of the documents are investigated. Utilization areas (scientific, technical, administration, and business information) are listed. High tariffs and the lack of necessary provision make a direct participation strategy impossible. However, in the experimental phase, Dutch companies must be allowed to contribute in technical developments and availability of organizational and technical facilities must be stimulated.

  10. Acquisition plan for Digital Document Storage (DDS) prototype system

    NASA Technical Reports Server (NTRS)

    1990-01-01

    NASA Headquarters maintains a continuing interest in and commitment to exploring the use of new technology to support productivity improvements in meeting service requirements tasked to the NASA Scientific and Technical Information (STI) Facility, and to support cost effective approaches to the development and delivery of enhanced levels of service provided by the STI Facility. The DDS project has been pursued with this interest and commitment in mind. It is believed that DDS will provide improved archival blowback quality and service for ad hoc requests for paper copies of documents archived and serviced centrally at the STI Facility. It will also develop an operating capability to scan, digitize, store, and reproduce paper copies of 5000 NASA technical reports archived annually at the STI Facility and serviced to the user community. Additionally, it will provide NASA Headquarters and field installations with on-demand, remote, electronic retrieval of digitized, bilevel, bit mapped report images along with branched, nonsequential retrieval of report subparts.

  11. Hanford facility dangerous waste permit application, general information portion. Revision 3

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sonnichsen, J.C.

    1997-08-21

    For purposes of the Hanford facility dangerous waste permit application, the US Department of Energy`s contractors are identified as ``co-operators`` and sign in that capacity (refer to Condition I.A.2. of the Dangerous Waste Portion of the Hanford Facility Resource Conservation and Recovery Act Permit). Any identification of these contractors as an ``operator`` elsewhere in the application is not meant to conflict with the contractors` designation as co-operators but rather is based on the contractors` contractual status with the U.S. Department of Energy, Richland Operations Office. The Dangerous Waste Portion of the initial Hanford Facility Resource Conservation and Recovery Act Permit,more » which incorporated five treatment, storage, and/or disposal units, was based on information submitted in the Hanford Facility Dangerous Waste Permit Application and in closure plan and closure/postclosure plan documentation. During 1995, the Dangerous Waste Portion was modified twice to incorporate another eight treatment, storage, and/or disposal units; during 1996, the Dangerous Waste Portion was modified once to incorporate another five treatment, storage, and/or disposal units. The permit modification process will be used at least annually to incorporate additional treatment, storage, and/or disposal units as permitting documentation for these units is finalized. The units to be included in annual modifications are specified in a schedule contained in the Dangerous Waste Portion of the Hanford Facility Resource Conservation and Recovery Act Permit. Treatment, storage, and/or disposal units will remain in interim status until incorporated into the Permit. The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (this document, DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to individual operating treatment, storage, and/or disposal units

  12. Report on Collaborative Facilities Projects.

    ERIC Educational Resources Information Center

    California Community Colleges, Sacramento. Office of the Chancellor.

    California's community colleges develop their own requests in concert with their district five-year master plan. They then submit those requests to the State Chancellor's Office for review. This document discusses the current process of submitting proposals for collaborative facilities projects, and outlines and discusses five recommendations for…

  13. Final Design Report for the RH LLW Disposal Facility (RDF) Project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Austad, Stephanie Lee

    2015-09-01

    The RH LLW Disposal Facility (RDF) Project was designed by AREVA Federal Services (AFS) and the design process was managed by Battelle Energy Alliance (BEA) for the Department of Energy (DOE). The final design report for the RH LLW Disposal Facility Project is a compilation of the documents and deliverables included in the facility final design.

  14. Final Design Report for the RH LLW Disposal Facility (RDF) Project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Austad, S. L.

    2015-05-01

    The RH LLW Disposal Facility (RDF) Project was designed by AREVA Federal Services (AFS) and the design process was managed by Battelle Energy Alliance (BEA) for the Department of Energy (DOE). The final design report for the RH LLW Disposal Facility Project is a compilation of the documents and deliverables included in the facility final design.

  15. Software Engineering Laboratory (SEL) Data Base Maintenance System (DBAM) user's guide and system description

    NASA Technical Reports Server (NTRS)

    Lo, P. S.; Card, D.

    1983-01-01

    The Software Engineering Laboratory (SEL) Data Base Maintenance System (DBAM) is explained. The various software facilities of the SEL, DBAM operating procedures, and DBAM system information are described. The relationships among DBAM components (baseline diagrams), component descriptions, overlay descriptions, indirect command file listings, file definitions, and sample data collection forms are provided.

  16. Enhanced Traffic Management System (ETMS) : functional description, version 5.0

    DOT National Transportation Integrated Search

    1995-06-30

    This document is a functional description of Version 5.0 of the Enhanced Traffic : Management System (ETMS). The ETMSis an automation system for supporting the : strategic management of air traffic. The ETMS is being developed and maintained in : con...

  17. Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

  18. Fisher Sand & Gravel New Mexico, Inc. General Air Quality Permit: Related Documents

    EPA Pesticide Factsheets

    Documents related to the Fisher Sand & Gravel – New Mexico, Inc., Grey Mesa Gravel Pit General Air Quality Permit for New or Modified Minor Source Stone Quarrying, Crushing, and Screening Facilities in Indian Country.

  19. Integration of clinical research documentation in electronic health records.

    PubMed

    Broach, Debra

    2015-04-01

    Clinical trials of investigational drugs and devices are often conducted within healthcare facilities concurrently with clinical care. With implementation of electronic health records, new communication methods are required to notify nonresearch clinicians of research participation. This article reviews clinical research source documentation, the electronic health record and the medical record, areas in which the research record and electronic health record overlap, and implications for the research nurse coordinator in documentation of the care of the patient/subject. Incorporation of clinical research documentation in the electronic health record will lead to a more complete patient/subject medical record in compliance with both research and medical records regulations. A literature search provided little information about the inclusion of clinical research documentation within the electronic health record. Although regulations and guidelines define both source documentation and the medical record, integration of research documentation in the electronic health record is not clearly defined. At minimum, the signed informed consent(s), investigational drug or device usage, and research team contact information should be documented within the electronic health record. Institutional policies should define a standardized process for this integration in the absence federal guidance. Nurses coordinating clinical trials are in an ideal position to define this integration.

  20. Nuclear facility decommissioning and site remedial actions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Knox, N.P.; Webb, J.R.; Ferguson, S.D.

    1990-09-01

    The 394 abstracted references on environmental restoration, nuclear facility decommissioning, uranium mill tailings management, and site remedial actions constitute the eleventh in a series of reports prepared annually for the US Department of Energy's Remedial Action Programs. Citations to foreign and domestic literature of all types -- technical reports, progress reports, journal articles, symposia proceedings, theses, books, patents, legislation, and research project descriptions -- have been included. The bibliography contains scientific, technical, economic, regulatory, and legal information pertinent to the US Department of Energy's Remedial Action Programs. Major sections are (1) Surplus Facilities Management Program, (2) Nuclear Facilities Decommissioning, (3)more » Formerly Utilized Sites Remedial Action Programs, (4) Facilities Contaminated with Naturally Occurring Radionuclides, (5) Uranium Mill Tailings Remedial Action Program, (6) Grand Junction Remedial Action Program, (7) Uranium Mill Tailings Management, (8) Technical Measurements Center, (9) Remedial Action Program, and (10) Environmental Restoration Program. Within these categories, references are arranged alphabetically by first author. Those references having no individual author are listed by corporate affiliation or by publication title. Indexes are provided for author, corporate affiliation, title word, publication description, geographic location, subject category, and keywords. This report is a product of the Remedial Action Program Information Center (RAPIC), which selects and analyzes information on remedial actions and relevant radioactive waste management technologies.« less

  1. Tribal Child Care Facilities: A Guide to Construction and Renovation.

    ERIC Educational Resources Information Center

    National Child Care Information Center, Vienna, VA.

    This document provides technical assistance in addressing major areas of the child care facility construction and renovation process, including conducting a child care community needs assessment, identifying a site, financing costs, developing a business plan, conducting an environmental assessment, building and designing a facility, and hiring…

  2. 30 CFR 210.204 - How do I submit facility data?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 210.204 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE MANAGEMENT FORMS AND REPORTS Production and Royalty Reports-Solid Minerals § 210.204 How do I submit facility...) Output quality or product grades. (5) Your submitted facility data may be internally generated documents...

  3. Supporting Documents for the Public Notice for Trans-Cycle Industries of Ohio, LLC

    EPA Pesticide Factsheets

    These files make up the supporting documents for the TCI application requesting to be able to continue operating as an alternative treatment and commercial polychlorinated biphenyl (PCB) storage facility.

  4. Microgravity research in NASA ground-based facilities

    NASA Technical Reports Server (NTRS)

    Lekan, Jack

    1989-01-01

    An overview of reduced gravity research performed in NASA ground-based facilities sponsored by the Microgravity Science and Applications Program of the NASA Office of Space Science and Applications is presented. A brief description and summary of the operations and capabilities of each of these facilities along with an overview of the historical usage of them is included. The goals and program elements of the Microgravity Science and Applications programs are described and the specific programs that utilize the low gravity facilities are identified. Results from two particular investigations in combustion (flame spread over solid fuels) and fluid physics (gas-liquid flows at microgravity conditions) are presented.

  5. Predicate Argument Structure Analysis for Use Case Description Modeling

    NASA Astrophysics Data System (ADS)

    Takeuchi, Hironori; Nakamura, Taiga; Yamaguchi, Takahira

    In a large software system development project, many documents are prepared and updated frequently. In such a situation, support is needed for looking through these documents easily to identify inconsistencies and to maintain traceability. In this research, we focus on the requirements documents such as use cases and consider how to create models from the use case descriptions in unformatted text. In the model construction, we propose a few semantic constraints based on the features of the use cases and use them for a predicate argument structure analysis to assign semantic labels to actors and actions. With this approach, we show that we can assign semantic labels without enhancing any existing general lexical resources such as case frame dictionaries and design a less language-dependent model construction architecture. By using the constructed model, we consider a system for quality analysis of the use cases and automated test case generation to keep the traceability between document sets. We evaluated the reuse of the existing use cases and generated test case steps automatically with the proposed prototype system from real-world use cases in the development of a system using a packaged application. Based on the evaluation, we show how to construct models with high precision from English and Japanese use case data. Also, we could generate good test cases for about 90% of the real use cases through the manual improvement of the descriptions based on the feedback from the quality analysis system.

  6. Spontaneous involution of keratoacanthoma, iconographic documentation and similarity with volcanoes of nature.

    PubMed

    Enei Gahona, Maria Leonor; Machado Filho, Carlos d' Aparecida Santos

    2012-01-01

    Through iconography, we show a case of keratoacanthoma (KA) on the nasal dorsum at two different stages of evolution (maturation and regression) and its similarity with images of the Mount St. Helens volcano and the Orcus Patera crater. Using these illustrations, we highlight why the crateriform aspect of this tumor is included in its classic clinical description. Moreover, we photographically documented the self-involuting tendency of KA, an aspect that is seldom documented in the literature.

  7. EPA Concurrence/Approval of Federal Facility Proposed Plans and Records of Decision and other Documents

    EPA Pesticide Factsheets

    The purpose of this memorandum is to ensure that EPA Regions scrutinize all proposed plans, draft and final RODs, and post-ROD documents that address institutional controls (ICs) in order to verify that they adequately document the objectives of the ICs and clearly identify who has responsibility for implementation, monitoring, reporting, and enforcement of the IC.

  8. Neutron Depth Profiling: Overview and Description of NIST Facilities

    PubMed Central

    Downing, R. G.; Lamaze, G. P.; Langland, J. K.; Hwang, S. T.

    1993-01-01

    The Cold Neutron Depth Profiling (CNDP) instrument at the NIST Cold Neutron Research Facility (CNRF) is now operational. The neutron beam originates from a 16 L D2O ice cold source and passes through a filter of 135 mm of single crystal sapphire. The neutron energy spectrum may be described by a 65 K Maxwellian distribution. The sample chamber configuration allows for remote controlled scanning of 150 × 150 mm sample areas including the varying of both sample and detector angle. The improved sensitivity over the current thermal depth profiling instrument has permitted the first nondestructive measurements of 17O profiles. This paper describes the CNDP instrument, illustrates the neutron depth profiling (NDP) technique with examples, and gives a separate bibliography of NDP publications. PMID:28053461

  9. Not in whose backyard? Minority population concentrations and noxious facility sites

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nieves, L.A.

    1992-04-01

    The NIMBY (not in may backyard) syndrome has become the nemesis of facility siting efforts in the USA. Given people`s reluctance to live near noxious facilities, in whose backyard are such facilities located? This study employs US county-level data to examine relative concentrations of minorities living near noxious facilities. Facility types analyzed include electric generating plants, manufacturing plants, Superfund sites, and radioactive waste disposal sites. While this study does not address which cam first, the minority population concentration or the noxious facilities, it documents their current degree of association.

  10. Not in whose backyard Minority population concentrations and noxious facility sites

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nieves, L.A.

    1992-01-01

    The NIMBY (not in may backyard) syndrome has become the nemesis of facility siting efforts in the USA. Given people's reluctance to live near noxious facilities, in whose backyard are such facilities located This study employs US county-level data to examine relative concentrations of minorities living near noxious facilities. Facility types analyzed include electric generating plants, manufacturing plants, Superfund sites, and radioactive waste disposal sites. While this study does not address which cam first, the minority population concentration or the noxious facilities, it documents their current degree of association.

  11. Energy Systems Test Area (ESTA). Power Systems Test Facilities

    NASA Technical Reports Server (NTRS)

    Situ, Cindy H.

    2010-01-01

    This viewgraph presentation provides a detailed description of the Johnson Space Center's Power Systems Facility located in the Energy Systems Test Area (ESTA). Facilities and the resources used to support power and battery systems testing are also shown. The contents include: 1) Power Testing; 2) Power Test Equipment Capabilities Summary; 3) Source/Load; 4) Battery Facilities; 5) Battery Test Equipment Capabilities Summary; 6) Battery Testing; 7) Performance Test Equipment; 8) Battery Test Environments; 9) Battery Abuse Chambers; 10) Battery Abuse Capabilities; and 11) Battery Test Area Resources.

  12. 78 FR 40421 - Inquiry Regarding Video Description in Video Programming Distributed on Television and on the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-05

    ... the status, benefits, and costs of video description on television and Internet- provided video... operational issues, costs, and benefits of providing video descriptions for video programming that is... document, the Federal Communications Commission (Commission) solicits public comment on issues related to...

  13. The NASA Air Traffic Management Ontology: Technical Documentation

    NASA Technical Reports Server (NTRS)

    Keller, Richard M.

    2017-01-01

    This document is intended to serve as comprehensive documentation for the NASA Air Traffic Management (ATM) Ontology. The ATM Ontology is a conceptual model that defines key classes of entities and relationships pertaining to the US National Airspace System (NAS) and the management of air traffic through that system. A wide variety of classes are represented in the ATM Ontology, including classes corresponding to flights, aircraft, manufacturers, airports, airlines, air routes, NAS facilities, air traffic control advisories, weather phenomena, and many others. The Ontology can be useful in the context of a variety of information management tasks relevant to NAS, including information exchange, data query and search, information organization, information integration, and terminology standardization.

  14. Automated search and retrieval of information from imaged documents using optical correlation techniques

    NASA Astrophysics Data System (ADS)

    Stalcup, Bruce W.; Dennis, Phillip W.; Dydyk, Robert B.

    1999-10-01

    Litton PRC and Litton Data Systems Division are developing a system, the Imaged Document Optical Correlation and Conversion System (IDOCCS), to provide a total solution to the problem of managing and retrieving textual and graphic information from imaged document archives. At the heart of IDOCCS, optical correlation technology provides the search and retrieval of information from imaged documents. IDOCCS can be used to rapidly search for key words or phrases within the imaged document archives. In addition, IDOCCS can automatically compare an input document with the archived database to determine if it is a duplicate, thereby reducing the overall resources required to maintain and access the document database. Embedded graphics on imaged pages can also be exploited; e.g., imaged documents containing an agency's seal or logo can be singled out. In this paper, we present a description of IDOCCS as well as preliminary performance results and theoretical projections.

  15. ETF Facility evaporator skid orifice sizing design analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    ELLINGSON, S.D.

    1999-08-31

    This document releases and records the design analysis for sizing the Orifice plate being installed on the Effluent Treatment Facility (ETF) evaporator skid per Engineering Change Notice (ECN) 651583.

  16. Progress toward a cosmic dust collection facility on space station

    NASA Technical Reports Server (NTRS)

    Mackinnon, Ian D. R. (Editor); Carey, William C. (Editor)

    1987-01-01

    Scientific and programmatic progress toward the development of a cosmic dust collection facility (CDCF) for the proposed space station is documented. Topics addressed include: trajectory sensor concepts; trajectory accuracy and orbital evolution; CDCF pointing direction; development of capture devices; analytical techniques; programmatic progress; flight opportunities; and facility development.

  17. Earth System Documentation (ES-DOC) Preparation for CMIP6

    NASA Astrophysics Data System (ADS)

    Denvil, S.; Murphy, S.; Greenslade, M. A.; Lawrence, B.; Guilyardi, E.; Pascoe, C.; Treshanksy, A.; Elkington, M.; Hibling, E.; Hassell, D.

    2015-12-01

    During the course of 2015 the Earth System Documentation (ES-DOC) project began its preparations for CMIP6 (Coupled Model Inter-comparison Project 6) by further extending the ES-DOC tooling ecosystem in support of Earth System Model (ESM) documentation creation, search, viewing & comparison. The ES-DOC online questionnaire, the ES-DOC desktop notebook, and the ES-DOC python toolkit will serve as multiple complementary pathways to generating CMIP6 documentation. It is envisaged that institutes will leverage these tools at different points of the CMIP6 lifecycle. Institutes will be particularly interested to know that the documentation burden will be either streamlined or completely automated.As all the tools are tightly integrated with the ES-DOC web-service, institutes can be confident that the latency between documentation creation & publishing will be reduced to a minimum. Published documents will be viewable with the online ES-DOC Viewer (accessible via citable URL's). Model inter-comparison scenarios will be supported using the ES-DOC online Comparator tool. The Comparator is being extended to:• Support comparison of both Model descriptions & Simulation runs;• Greatly streamline the effort involved in compiling official tables.The entire ES-DOC ecosystem is open source and built upon open standards such as the Common Information Model (CIM) (versions 1 and 2).

  18. ATR National Scientific User Facility 2013 Annual Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ulrich, Julie A.; Robertson, Sarah

    2015-03-01

    This is the 2013 Annual Report for the Advanced Test Reactor National Scientific User Facility. This report includes information on university-run research projects along with a description of the program and the capabilities offered researchers.

  19. Holifield Heavy-Ion Research Facility at Oak Ridge

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jones, C.M.

    1977-01-01

    A new heavy-ion accelerator facility is now under construction at the Oak Ridge National Laboratory. A brief description of the scope and schedule of this project is given, and the new large tandem accelerator, which will be a major element of the facility is discussed in some detail. Several studies which have been made or are in progress in Oak Ridge in preparation for operation of the tandem accelerator are briefly described.

  20. Nuclear facility decommissioning and site remedial actions: A selected bibliography: Volume 8

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Owen, P.T.; Michelson, D.C.; Knox, N.P.

    1987-09-01

    The 553 abstracted references on nuclear facility decommissioning, uranium mill tailings management, and site remedial actions constitute the eighth in a series of reports. Foreign and domestic literature of all types - technical reports, progress reports, journal articles, symposia proceedings, theses, books, patents, legislation, and research project descriptions - has been included. The bibliography contains scientific, technical, economic, regulatory, and legal information pertinent to the US Department of energy's remedial action program. Major chapters are Surplus Facilities Management Program, Nuclear Facilities Decommissioning, Formerly Utilized Sites Remedial Action Program, Facilities Contaminated with Naturally Occurring Radionuclides, Uranium Mill Tailings Remedial Action Program,more » Uranium Mill Tailings Management, Technical Measurements Center, and General Remedial Action Program Studies. Chapter sections for chapters 1, 2, 5, and 6 include Design, Planning, and Regulations; Environmental Studies and Site Surveys; Health, Safety, and Biomedical Studies; Decontamination Studies; Dismantlement and Demolition; Site Stabilization and Reclamation; Waste Disposal; Remedial Action Experience; and General Studies. Within these categories, references are arranged alphabetically by first author. Those references having no individual author are listed by corporate affiliation or by publication description. Indexes are provided for author, corporate affiliation, title word, publication description, geographic location, and keywords. The appendix contains a list of frequently used acronyms and abbreviations.« less

  1. Advanced Transport Operating System (ATOPS) color displays software description: MicroVAX system

    NASA Technical Reports Server (NTRS)

    Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

    1992-01-01

    This document describes the software created for the Display MicroVAX computer used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery of February 27, 1991, known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global references section includes subroutines, functions, and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight Cathode Ray Tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

  2. Investigating walking environments in and around assisted living facilities: a facility visit study.

    PubMed

    Lu, Zhipeng

    2010-01-01

    This study explores assisted living residents' walking behaviors, locations where residents prefer to walk, and walking environments in and around assisted living facilities. Regular walking is beneficial to older adults' physical and psychological health. Yet frail older residents in assisted living are usually too sedentary to achieve these benefits. The physical environment plays an important role in promoting physical activity. However, there is little research exploring this relationship in assisted living settings. The researcher visited 34 assisted living facilities in a major Texas city. Methods included walk-through observation with the Assisted Living Facility Walking Environment Checklist, and interviews with administrators by open- and close-ended questions. The data from 26 facilities were analyzed using descriptive statistics (for quantitative data) and content analysis (for qualitative data). The results indicate that (a) residents were walking both indoors and outdoors for exercise or other purposes (e.g., going to destinations); (b) assisted living facility planning and design details-such as neighborhood sidewalk conditions, facility site selection, availability of seating, walking path configuration (e.g., looped/nonlooped path), amount of shading along the path, presence of handrails, existence of signage, etc.-may influence residents' walking behaviors; and (c) current assisted living facilities need improvement in all aspects to make their environments more walkable for residents. Findings of the study provide recommendations for assisted living facilities to improve the walkability of environments and to create environmental interventions to promote regular walking among their residents. This study also implies several directions for future research.

  3. Nystagmus Assessments Documented by Emergency Physicians in Acute Dizziness Presentations: A Target for Decision Support?

    PubMed Central

    Kerber, Kevin A.; Morgenstern, Lewis B.; Meurer, William J.; McLaughlin, Thomas; Hall, Pamela A.; Forman, Jane; Fendrick, A. Mark; Newman-Toker, David E.

    2011-01-01

    Objectives Dizziness is a common presenting complaint to the emergency department (ED), and emergency physicians (EPs) consider these presentations a priority for decision support. Assessing for nystagmus and defining its features are important steps for any acute dizziness decision algorithm. The authors sought to describe nystagmus documentation in routine ED care to determine if nystagmus assessments might be an important target in decision support efforts. Methods Medical records from ED visits for dizziness were captured as part of a surveillance study embedded within an ongoing population-based cohort study. Visits with documentation of a nystagmus assessment were reviewed and coded for presence or absence of nystagmus, ability to draw a meaningful inference from the description, and coherence with the final EP diagnosis when a peripheral vestibular diagnosis was made. Results Of 1,091 visits for dizziness, 887 (81.3%) documented a nystagmus assessment. Nystagmus was present in 185 out of 887 (20.9%) visits. When nystagmus was present, no further characteristics were recorded in 48 of the 185 visits (26%). The documentation of nystagmus (including all descriptors recorded) enabled a meaningful inference about the localization or cause in only 10 of the 185 (5.4%) visits. The nystagmus description conflicted with the EP diagnosis in 113 (80.7%) of the 140 visits that received a peripheral vestibular diagnosis. Conclusions Nystagmus assessments are frequently documented in acute dizziness presentations, but details do not generally enable a meaningful inference. Recorded descriptions usually conflict with the diagnosis when a peripheral vestibular diagnosis is rendered. Nystagmus assessments might be an important target in developing decision support for dizziness presentations. PMID:21676060

  4. RMP Guidance for Propane Storage Facilities - Main Text

    EPA Pesticide Factsheets

    This document is intended as comprehensive Risk Management Program guidance for larger propane storage or distribution facilities who already comply with propane industry standards. Includes sample RMP, and release calculations.

  5. Intelligent Software for System Design and Documentation

    NASA Technical Reports Server (NTRS)

    2002-01-01

    In an effort to develop a real-time, on-line database system that tracks documentation changes in NASA's propulsion test facilities, engineers at Stennis Space Center teamed with ECT International of Brookfield, WI, through the NASA Dual-Use Development Program to create the External Data Program and Hyperlink Add-on Modules for the promis*e software. Promis*e is ECT's top-of-the-line intelligent software for control system design and documentation. With promis*e the user can make use of the automated design process to quickly generate control system schematics, panel layouts, bills of material, wire lists, terminal plans and more. NASA and its testing contractors currently use promis*e to create the drawings and schematics at the E2 Cell 2 test stand located at Stennis Space Center.

  6. 40 CFR 421.200 - Applicability: Description of the secondary mercury subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... secondary mercury subcategory. 421.200 Section 421.200 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Mercury Subcategory § 421.200 Applicability: Description of the secondary mercury... mercury from secondary mercury facilities processing recycled mercuric oxide batteries and other mercury...

  7. 40 CFR 421.200 - Applicability: Description of the secondary mercury subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... secondary mercury subcategory. 421.200 Section 421.200 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Mercury Subcategory § 421.200 Applicability: Description of the secondary mercury... mercury from secondary mercury facilities processing recycled mercuric oxide batteries and other mercury...

  8. 40 CFR 421.200 - Applicability: Description of the secondary mercury subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... secondary mercury subcategory. 421.200 Section 421.200 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Mercury Subcategory § 421.200 Applicability: Description of the secondary mercury... mercury from secondary mercury facilities processing recycled mercuric oxide batteries and other mercury...

  9. 40 CFR 421.200 - Applicability: Description of the secondary mercury subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... secondary mercury subcategory. 421.200 Section 421.200 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Mercury Subcategory § 421.200 Applicability: Description of the secondary mercury... mercury from secondary mercury facilities processing recycled mercuric oxide batteries and other mercury...

  10. 40 CFR 421.200 - Applicability: Description of the secondary mercury subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... secondary mercury subcategory. 421.200 Section 421.200 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Secondary Mercury Subcategory § 421.200 Applicability: Description of the secondary mercury... mercury from secondary mercury facilities processing recycled mercuric oxide batteries and other mercury...

  11. School Finance and Facilities Study.

    ERIC Educational Resources Information Center

    Kawakami, Alice J., Ed.

    1994-01-01

    This document presents findings of a Pacific Region Educational Laboratory (PREL) study on the status of school finance and facilities in the 10 entities of the Pacific region served by PREL--American Samoa, Commonwealth of the Northern Mariana Islands (CNMI), Federated States of Micronesia, Guam, Hawaii, Republic of the Marshall Islands, and the…

  12. Do published studies of educational outreach provide documentation of potentially important characteristics?

    PubMed

    Van Hoof, Thomas J; Miller, Nicole E; Meehan, Thomas P

    2013-01-01

    Educational outreach is a common intervention used to translate research findings into practice; however, the intervention has a mixed effect on changing clinician behavior and improving patient outcomes. Based on a published set of characteristics aimed at standardizing the approach to educational outreach, the authors undertook a careful review of the literature to determine the consistency and completeness of documentation. Using a 25-item abstraction tool, the authors reviewed 68 published studies of a recent Cochrane meta-analysis to determine the extent to which educational outreach studies provide recommended documentation of important characteristics. The results indicate that studies are generally inconsistent (documentation range of 0% to 100% across characteristics) and incomplete (documentation average of 43.1% across studies) in their descriptions. Documentation shortcomings of educational outreach studies make understanding the intervention and interpreting its findings particularly challenging. The authors recommend the creation of a guideline to help improve documentation of educational outreach efforts.

  13. Baseline process description for simulating plutonium oxide production for precalc project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pike, J. A.

    Savannah River National Laboratory (SRNL) started a multi-year project, the PreCalc Project, to develop a computational simulation of a plutonium oxide (PuO 2) production facility with the objective to study the fundamental relationships between morphological and physicochemical properties. This report provides a detailed baseline process description to be used by SRNL personnel and collaborators to facilitate the initial design and construction of the simulation. The PreCalc Project team selected the HB-Line Plutonium Finishing Facility as the basis for a nominal baseline process since the facility is operational and significant model validation data can be obtained. The process boundary as wellmore » as process and facility design details necessary for multi-scale, multi-physics models are provided.« less

  14. Zero Gravity Research Facility User's Guide

    NASA Technical Reports Server (NTRS)

    Thompson, Dennis M.

    1999-01-01

    The Zero Gravity Research Facility (ZGF) is operated by the Space Experiments Division of the NASA John H. Glenn Research Center (GRC) for investigators sponsored by the Microgravity Science and Applications Division of NASA Headquarters. This unique facility has been utilized by scientists and engineers for reduced gravity experimentation since 1966. The ZGF has provided fundamental scientific information, has been used as an important test facility in the space flight hardware design, development, and test process, and has also been a valuable source of data in the flight experiment definition process. The purpose of this document is to provide information and guidance to prospective researchers regarding the design, buildup, and testing of microgravity experiments.

  15. Putting Practice into Words: The State of Data and Methods Transparency in Grammatical Descriptions

    ERIC Educational Resources Information Center

    Gawne, Lauren; Kelly, Barbara F.; Berez-Kroeker, Andrea L.; Heston, Tyler

    2017-01-01

    Language documentation and description are closely related practices, often performed as part of the same fieldwork project on an un(der)-studied language. Research trends in recent decades have seen a great volume of publishing in regards to the methods of language documentation, however, it is not clear that linguists' awareness of the…

  16. Project IMPACT Software Documentation: Overview of the Computer-Administered Instruction Subsystem.

    ERIC Educational Resources Information Center

    Stelzer, John; Garneau, Jean

    Research in Project IMPACT, prototypes of computerized training for Army personnel, is documented in an overview of the IMPACT computer software system for computer-administered instruction, exclusive of instructional software. The overview description provides a basis for an understanding of the rationale and motivation for the development of the…

  17. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 7

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1994-04-01

    This Requirements Identification Document (RID) describes an Occupational Health and Safety Program as defined through the Relevant DOE Orders, regulations, industry codes/standards, industry guidance documents and, as appropriate, good industry practice. The definition of an Occupational Health and Safety Program as specified by this document is intended to address Defense Nuclear Facilities Safety Board Recommendations 90-2 and 91-1, which call for the strengthening of DOE complex activities through the identification and application of relevant standards which supplement or exceed requirements mandated by DOE Orders. This RID applies to the activities, personnel, structures, systems, components, and programs involved in maintaining themore » facility and executing the mission of the High-Level Waste Storage Tank Farms.« less

  18. The NASA Lewis Research Center Water Tunnel Facility

    NASA Technical Reports Server (NTRS)

    Wasserbauer, Charles A.

    1997-01-01

    A water tunnel facility specifically designed to investigate internal fluid duct flows has been built at the NASA Research Center. It is built in a modular fashion so that a variety of internal flow test hardware can be installed in the facility with minimal facility reconfiguration. The facility and test hardware interfaces are discussed along with design constraints for future test hardware. The inlet chamber flow conditioning approach is also detailed. Instrumentation and data acquisition capabilities are discussed. The incoming flow quality has been documented for about one quarter of the current facility operating range. At that range, there is some scatter in the data in the turbulent boundary layer which approaches 10 percent of the duct radius leading to a uniform core.

  19. 48 CFR 801.602-84 - Documents to submit for business clearance reviews.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS ACQUISITION REGULATION SYSTEM Career... reviews. A contracting officer must submit to Acquisition Resources Service (Office of Construction and Facilities Management and National Cemetery Administration contracting officers shall forward the documents...

  20. Conceptual design for the Space Station Freedom fluid physics/dynamics facility

    NASA Technical Reports Server (NTRS)

    Thompson, Robert L.; Chucksa, Ronald J.; Omalley, Terence F.; Oeftering, Richard C.

    1993-01-01

    A study team at NASA's Lewis Research Center has been working on a definition study and conceptual design for a fluid physics and dynamics science facility that will be located in the Space Station Freedom's baseline U.S. Laboratory module. This modular, user-friendly facility, called the Fluid Physics/Dynamics Facility, will be available for use by industry, academic, and government research communities in the late 1990's. The Facility will support research experiments dealing with the study of fluid physics and dynamics phenomena. Because of the lack of gravity-induced convection, research into the mechanisms of fluids in the absence of gravity will help to provide a better understanding of the fundamentals of fluid processes. This document has been prepared as a final version of the handout for reviewers at the Fluid Physics/Dynamics Facility Assessment Workshop held at Lewis on January 24 and 25, 1990. It covers the background, current status, and future activities of the Lewis Project Study Team effort. It is a revised and updated version of a document entitled 'Status Report on the Conceptual Design for the Space Station Fluid Physics/Dynamics Facility', dated January 1990.

  1. 7 CFR 3405.9 - Use of funds for facilities.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program Description § 3405.9 Use of funds for facilities. Under the Higher Education Challenge Grants Program, the use of grant funds to plan, acquire, or...

  2. 7 CFR 3405.9 - Use of funds for facilities.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program Description § 3405.9 Use of funds for facilities. Under the Higher Education Challenge Grants Program, the use of grant funds to plan, acquire, or...

  3. 7 CFR 3405.9 - Use of funds for facilities.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program Description § 3405.9 Use of funds for facilities. Under the Higher Education Challenge Grants Program, the use of grant funds to plan, acquire, or...

  4. 7 CFR 3405.9 - Use of funds for facilities.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program Description § 3405.9 Use of funds for facilities. Under the Higher Education Challenge Grants Program, the use of grant funds to plan, acquire, or...

  5. Operation, Maintenance and Management of Wastewater Treatment Facilities: A Bibliography of Technical Documents.

    ERIC Educational Resources Information Center

    Himes, Dottie

    This is an annotated bibliography of wastewater treatment manuals. Fourteen manuals are abstracted including: (1) A Planned Maintenance Management System for Municipal Wastewater Treatment Plants; (2) Anaerobic Sludge Digestion, Operations Manual; (3) Emergency Planning for Municipal Wastewater Treatment Facilities; (4) Estimating Laboratory Needs…

  6. Conceptual design of the National Ignition Facility

    NASA Astrophysics Data System (ADS)

    Paisner, Jeffrey A.; Boyes, John D.; Kumpan, Steven A.; Lowdermilk, W. Howard; Sorem, Michael S.

    1995-12-01

    The Secretary of the U.S. Department of Energy (DOE) commissioned a conceptual design report (CDR) for the National Ignition Facility (NIF) in January 1993 as part of a key decision zero (KD0), justification of mission need. Motivated by the progress to date by the inertial confinement fusion (ICF) program in meeting the Nova technical contract goals established by the National Academy of Sciences in 1989, the Secretary requested a design using a solid-state laser driver operating at the third harmonic (0.35 micrometer) of neodymium (Nd) glass. The participating ICF laboratories signed a memorandum of agreement in August 1993, and established a project organization, including a technical team from the Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratories (SNL), and the Laboratory for Laser Energetics at the University of Rochester. Since then, we completed the NIF conceptual design, based on standard construction at a generic DOE defense program's site, and issued a 7,000-page, 27-volume CDR in May 1994. Over the course of the conceptual design study, several other key documents were generated, including a facilities requirements document, a conceptual design scope and plan, a target physics design document, a laser design cost basis document, a functional requirements document, an experimental plan for indirect drive ignition, and a preliminary hazards analysis (PHA) document. DOE used the PHA to categorize the NIF as a low-hazard, non-nuclear facility. On October 21, 1994 the Secretary of Energy issued a key decision one (KD1) for the NIF, which approved the project and authorized DOE to request Office of Management and Budget-approval for congressional line-item FY 1996 NIF funding for preliminary engineering design and for National Environmental Policy Act activities. In addition, the Secretary declared Livermore as the preferred site for constructing the NIF. In February 1995, the NIF Project was

  7. Using bio.tools to generate and annotate workbench tool descriptions

    PubMed Central

    Hillion, Kenzo-Hugo; Kuzmin, Ivan; Khodak, Anton; Rasche, Eric; Crusoe, Michael; Peterson, Hedi; Ison, Jon; Ménager, Hervé

    2017-01-01

    Workbench and workflow systems such as Galaxy, Taverna, Chipster, or Common Workflow Language (CWL)-based frameworks, facilitate the access to bioinformatics tools in a user-friendly, scalable and reproducible way. Still, the integration of tools in such environments remains a cumbersome, time consuming and error-prone process. A major consequence is the incomplete or outdated description of tools that are often missing important information, including parameters and metadata such as publication or links to documentation. ToolDog (Tool DescriptiOn Generator) facilitates the integration of tools - which have been registered in the ELIXIR tools registry (https://bio.tools) - into workbench environments by generating tool description templates. ToolDog includes two modules. The first module analyses the source code of the bioinformatics software with language-specific plugins, and generates a skeleton for a Galaxy XML or CWL tool description. The second module is dedicated to the enrichment of the generated tool description, using metadata provided by bio.tools. This last module can also be used on its own to complete or correct existing tool descriptions with missing metadata. PMID:29333231

  8. Math Description Engine Software Development Kit

    NASA Technical Reports Server (NTRS)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  9. Coal conversion: description of technologies and necessary biomedical and environmental research

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1976-08-01

    This document contains a description of the biomedical and environmental research necessary to ensure the timely attainment of coal conversion technologies amenable to man and his environment. The document is divided into three sections. The first deals with the types of processes currently being considered for development; the data currently available on composition of product, process and product streams, and their potential effects; and problems that might arise from transportation and use of products. Section II is concerned with a description of the necessary research in each of the King-Muir categories, while the third section presents the research strategies necessarymore » to assess the potential problems at the conversion plant (site specific) and those problems that might effect the general public and environment as a result of the operation of large-scale coal conversion plants.« less

  10. 18 CFR 157.213 - Underground storage field facilities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... storage reservoir and within the buffer area; (4) A detailed description of present storage operations and..., provided the storage facility's certificated physical parameters—including total inventory, reservoir pressure, reservoir and buffer boundaries, and certificated capacity remain unchanged—and provided...

  11. Global Document Delivery, User Studies, and Service Evaluation: The Gateway Experience

    ERIC Educational Resources Information Center

    Miller, Rush; Xu, Hong; Zou, Xiuying

    2008-01-01

    This study examines user and service data from 2002-2006 at the East Asian Gateway Service for Chinese and Korean Academic Journal Publications (Gateway Service), the University of Pittsburgh. Descriptive statistical analysis reveals that the Gateway Service has been consistently playing the leading role in global document delivery service as well…

  12. 33 CFR 147.815 - ExxonMobil Hoover Floating OCS Facility safety zone.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false ExxonMobil Hoover Floating OCS... HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.815 ExxonMobil Hoover Floating OCS Facility safety zone. (a) Description. The ExxonMobil Hoover Floating OCS Facility, Alaminos...

  13. 33 CFR 147.815 - ExxonMobil Hoover Floating OCS Facility safety zone.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false ExxonMobil Hoover Floating OCS... HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.815 ExxonMobil Hoover Floating OCS Facility safety zone. (a) Description. The ExxonMobil Hoover Floating OCS Facility, Alaminos...

  14. 33 CFR 147.815 - ExxonMobil Hoover Floating OCS Facility safety zone.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false ExxonMobil Hoover Floating OCS... HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.815 ExxonMobil Hoover Floating OCS Facility safety zone. (a) Description. The ExxonMobil Hoover Floating OCS Facility, Alaminos...

  15. 33 CFR 147.815 - ExxonMobil Hoover Floating OCS Facility safety zone.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false ExxonMobil Hoover Floating OCS... HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.815 ExxonMobil Hoover Floating OCS Facility safety zone. (a) Description. The ExxonMobil Hoover Floating OCS Facility, Alaminos...

  16. Documentation of the Benson Diesel Engine Simulation Program

    NASA Technical Reports Server (NTRS)

    Vangerpen, Jon

    1988-01-01

    This report documents the Benson Diesel Engine Simulation Program and explains how it can be used to predict the performance of diesel engines. The program was obtained from the Garrett Turbine Engine Company but has been extensively modified since. The program is a thermodynamic simulation of the diesel engine cycle which uses a single zone combustion model. It can be used to predict the effect of changes in engine design and operating parameters such as valve timing, speed and boost pressure. The most significan change made to this program is the addition of a more detailed heat transfer model to predict metal part temperatures. This report contains a description of the sub-models used in the Benson program, a description of the input parameters and sample program runs.

  17. A Guide for Equipping Industrial Arts Facilities.

    ERIC Educational Resources Information Center

    American Industrial Arts Association, Washington, DC. Equipment Guide Committee.

    A guide for planning new and revising existing industrial arts facilities which gives a listing of tools and equipment recommended for each of the major areas of instruction (automotive and power mechanics, ceramics, drafting, electronics, elementary, general shop, graphic arts, metalworking, plastics, and woodworking). General descriptions and…

  18. Description of the AILS Alerting Algorithm

    NASA Technical Reports Server (NTRS)

    Samanant, Paul; Jackson, Mike

    2000-01-01

    This document provides a complete description of the Airborne Information for Lateral Spacing (AILS) alerting algorithms. The purpose of AILS is to provide separation assurance between aircraft during simultaneous approaches to closely spaced parallel runways. AILS will allow independent approaches to be flown in such situations where dependent approaches were previously required (typically under Instrument Meteorological Conditions (IMC)). This is achieved by providing multiple levels of alerting for pairs of aircraft that are in parallel approach situations. This document#s scope is comprehensive and covers everything from general overviews, definitions, and concepts down to algorithmic elements and equations. The entire algorithm is presented in complete and detailed pseudo-code format. This can be used by software programmers to program AILS into a software language. Additional supporting information is provided in the form of coordinate frame definitions, data requirements, calling requirements as well as all necessary pre-processing and post-processing requirements. This is important and required information for the implementation of AILS into an analysis, a simulation, or a real-time system.

  19. Users Guide for the National Transonic Facility Research Data System

    NASA Technical Reports Server (NTRS)

    Foster, Jean M.; Adcock, Jerry B.

    1996-01-01

    The National Transonic Facility is a complex cryogenic wind tunnel facility. This report briefly describes the facility, the data systems, and the instrumentation used to acquire research data. The computational methods and equations are discussed in detail and many references are listed for those who need additional technical information. This report is intended to be a user's guide, not a programmer's guide; therefore, the data reduction code itself is not documented. The purpose of this report is to assist personnel involved in conducting a test in the National Transonic Facility.

  20. Decal Process Document and Catalog

    NASA Technical Reports Server (NTRS)

    1999-01-01

    The Decal Process Document and Catalog, JSC 27260 is the standard flight decal catalog, complete with illustrations and part numbers. As hardware developers identify labels that have common applicability across end items, these labels can be evaluated for "standard decal classification" and entered into the decal catalog for general use. The hardware developer must have a label design that meets current, applicable labeling requirements, and submit to the Decal Design and Production Facility (DDPF) as a standard label candidate. Upon approval, the label will be added to the decal catalog. The Decal Process Document and Catalog provides a selection of decals from which the NASA and NASA contractor customers can easily order. The decals shown in the catalog have been previously produced and have released engineering/fabrication drawings on file in the (DDPF). A released drawing is required before a decal can be produced or placed into the catalog. Some decals included in the catalog have a common applicability and are used in various NASA vehicles/habitats. It is the intent of the DDPF to maintain this catalog as a "living document" to which decals/placards can be added as they are repeatedly used. The advantage of identifYing flight decals in this catalog is that a released drawing is already in place, and the products will be flight certified.

  1. 40 CFR 35.2050 - Effect of approval or certification of documents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2050 Effect of approval or certification of documents. Review or approval of facilities plans, design drawings... relieve the grantee of its responsibility to properly plan, design, build and effectively operate and...

  2. Closeup of LDEF experiment trays documented during STS-32 photo survey

    NASA Image and Video Library

    1990-01-20

    Closeup of Long Duration Exposure Facility (LDEF) experiment trays is documented during STS-32 retrieval activity and photo survey conducted by crewmembers onboard Columbia, Orbiter Vehicle (OV) 102. Partially visible is the Polymer Matrix Composite Materials Experiment. In the background is the surface of the Earth.

  3. VICS-120 - A tube-vehicle system test facility.

    NASA Technical Reports Server (NTRS)

    Marte, J. E.

    1973-01-01

    Description of a large test facility for carrying out research in support of the aerodynamic and ventilation section of a handbook on subway design. The facility described is vertically oriented and has a test section with a nominal inside diameter of 2 in. and a length of 109 ft. It is capable of operating at Reynolds numbers up to full-scale (60,000,000) under open-end tube conditions. The facility is distinguished by a high degree of flexibility in configuration and operational limits. Details are given concerning the plenum assembly, the test section tubes, the scaffold, the instrumentation, the model launcher, the model arrestor, and the models themselves. A step-by-step account is given of the operation of the facility, and a brief sample of the type of data obtained from the facility is presented.

  4. YUCCA MOUNTAIN SITE DESCRIPTION

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    A.M. Simmons

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work donemore » at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.« less

  5. GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

    NASA Technical Reports Server (NTRS)

    Lockwood, Dennis W.; Conger, A. M.

    2003-01-01

    This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

  6. Delivering information: A descriptive study of Australian women’s information needs for decision-making about birth facility

    PubMed Central

    2012-01-01

    Background Little information is known about what information women want when choosing a birth facility. The objective of this study was to inform the development of a consumer decision support tool about birth facility by identifying the information needs of maternity care consumers in Queensland, Australia. Methods Participants were 146 women residing in both urban and rural areas of Queensland, Australia who were pregnant and/or had recently given birth. A cross-sectional survey was administered in which participants were asked to rate the importance of 42 information items to their decision-making about birth facility. Participants could also provide up to ten additional information items of interest in an open-ended question. Results On average, participants rated 30 of the 42 information items as important to decision-making about birth facility. While the majority of information items were valued by most participants, those related to policies about support people, other women’s recommendations about the facility, freedom to choose one’s preferred position during labour and birth, the aesthetic quality of the facility, and access to on-site neonatal intensive care were particularly widely valued. Additional items of interest frequently focused on postnatal care and support, policies related to medical intervention, and access to water immersion. Conclusions The women surveyed had significant and diverse information needs for decision-making about birth facility. These findings have immediate applications for the development of decision support tools about birth facility, and highlight the need for tools which provide a large volume of information in an accessible and user-friendly format. These findings may also be used to guide communication and information-sharing by care providers involved in counselling pregnant women and families about their options for birth facility or providing referrals to birth facilities. PMID:22708648

  7. Documentation and environment of the Apollo 16 samples: A preliminary report

    NASA Technical Reports Server (NTRS)

    1972-01-01

    A catalog which is a working document that shows the locations from which samples were collected during the Apollo 16 mission, and that provides a descriptive geologic context for each sample is presented. It is a compilation of notes from work in progress, and supersedes an earlier report prepared by the Apollo Lunar Geology Investigation Team. The information was obtained from the Air-to-Ground transcript from the astronaut crew, from lunar surface television, from 60 mm Hasselblad camera photographs, and from available LRL mugshot photographs of the samples. The sample descriptions are based on these sources of data.

  8. Stochastic Lanchester Air-to-Air Campaign Model: Model Description and Users Guides

    DTIC Science & Technology

    2009-01-01

    STOCHASTIC LANCHESTER AIR-TO-AIR CAMPAIGN MODEL MODEL DESCRIPTION AND USERS GUIDES—2009 REPORT PA702T1 Rober t V. Hemm Jr. Dav id A . Lee...LMI © 2009. ALL RIGHTS RESERVED. Stochastic Lanchester Air-to-Air Campaign Model: Model Description and Users Guides—2009 PA702T1/JANUARY...2009 Executive Summary This report documents the latest version of the Stochastic Lanchester Air-to-Air Campaign Model (SLAACM), developed by LMI for

  9. Medical surveillance and programs on industrial hygiene at RCRA facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Murphy, T.E.

    1994-12-31

    Some special areas where much progress in industrial hygiene and safety has been made in the past few years are; training, personal protective equipment, uniforms, personal monitoring, area monitoring, and medical surveillance. Before one can begin to construct programs for worker protection, some knowledge of potential exposures must be gained. The best place to start is the Waste Analysis Plan, and the list of wastes that a particular site is authorized to receive. Waste Codes are listed within a facility`s Part A and Part B permits. Actual facility receipt of wastes are well documented within Load Records and other documentation.more » A facility`s training program forms the heart of a health and safety program. Every TSD facility should have developed a matrix of job titles and required training. Every facility must also make a commitment to providing a wide range of personal protective equipment, including a wide array of disposables. Some facilities will benefit from the occasional use of the newer respirator quantitative fit-testing devices. All facilities are urged to rent or borrow this type of equipment periodically. Quantitative respirator fit-testers are capable of revealing important deficiencies in a respirator program. Providing uniforms is a newer means of protecting workers. The use of uniforms is an effective means for addressing the idea of carry-home-waste. The use of disposables including boots, must be integrated into a Uniform Program if the program is to be effective. In addition, employees must strictly understand that uniforms must not leave the facility at any time, including lunch time.« less

  10. Automated software system for checking the structure and format of ACM SIG documents

    NASA Astrophysics Data System (ADS)

    Mirza, Arsalan Rahman; Sah, Melike

    2017-04-01

    Microsoft (MS) Office Word is one of the most commonly used software tools for creating documents. MS Word 2007 and above uses XML to represent the structure of MS Word documents. Metadata about the documents are automatically created using Office Open XML (OOXML) syntax. We develop a new framework, which is called ADFCS (Automated Document Format Checking System) that takes the advantage of the OOXML metadata, in order to extract semantic information from MS Office Word documents. In particular, we develop a new ontology for Association for Computing Machinery (ACM) Special Interested Group (SIG) documents for representing the structure and format of these documents by using OWL (Web Ontology Language). Then, the metadata is extracted automatically in RDF (Resource Description Framework) according to this ontology using the developed software. Finally, we generate extensive rules in order to infer whether the documents are formatted according to ACM SIG standards. This paper, introduces ACM SIG ontology, metadata extraction process, inference engine, ADFCS online user interface, system evaluation and user study evaluations.

  11. Relevance of health level 7 clinical document architecture and integrating the healthcare enterprise cross-enterprise document sharing profile for managing chronic wounds in a telemedicine context.

    PubMed

    Finet, Philippe; Gibaud, Bernard; Dameron, Olivier; Le Bouquin Jeannès, Régine

    2016-03-01

    The number of patients with complications associated with chronic diseases increases with the ageing population. In particular, complex chronic wounds raise the re-admission rate in hospitals. In this context, the implementation of a telemedicine application in Basse-Normandie, France, contributes to reduce hospital stays and transport. This application requires a new collaboration among general practitioners, private duty nurses and the hospital staff. However, the main constraint mentioned by the users of this system is the lack of interoperability between the information system of this application and various partners' information systems. To improve medical data exchanges, the authors propose a new implementation based on the introduction of interoperable clinical documents and a digital document repository for managing the sharing of the documents between the telemedicine application users. They then show that this technical solution is suitable for any telemedicine application and any document sharing system in a healthcare facility or network.

  12. Experiment Needs and Facilities Study Appendix A Transient Reactor Test Facility (TREAT) Upgrade

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    The TREAT Upgrade effort is designed to provide significant new capabilities to satisfy experiment requirements associated with key LMFBR Safety Issues. The upgrade consists of reactor-core modifications to supply the physics performance needed for the new experiments, an Advanced TREAT loop with size and thermal-hydraulics capabilities needed for the experiments, associated interface equipment for loop operations and handling, and facility modifications necessary to accommodate operations with the Loop. The costs and schedules of the tasks to be accomplished under the TREAT Upgrade project are summarized. Cost, including contingency, is about 10 million dollars (1976 dollars). A schedule for execution ofmore » 36 months has been established to provide the new capabilities in order to provide timely support of the LMFBR national effort. A key requirement for the facility modifications is that the reactor availability will not be interrupted for more than 12 weeks during the upgrade. The Advanced TREAT loop is the prototype for the STF small-bundle package loop. Modified TREAT fuel elements contain segments of graphite-matrix fuel with graded uranium loadings similar to those of STF. In addition, the TREAT upgrade provides for use of STF-like stainless steel-UO{sub 2} TREAT fuel for tests of fully enriched fuel bundles. This report will introduce the Upgrade study by presenting a brief description of the scope, performance capability, safety considerations, cost schedule, and development requirements. This work is followed by a "Design Description". Because greatly upgraded loop performance is central to the upgrade, a description is given of Advanced TREAT loop requirements prior to description of the loop concept. Performance requirements of the upgraded reactor system are given. An extensive discussion of the reactor physics calculations performed for the Upgrade concept study is provided. Adequate physics performance is essential for performance of experiments

  13. Test Plan for the Wake Steering Experiment at the Scaled Wind Farm Technology (SWiFT) Facility.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Naughton, Brian Thomas

    This document is a test plan describing the objectives, configuration, procedures, reporting, roles, and responsibilities for conducting the joint Sandia National Laboratories and National Renewable Energy Laboratory Wake Steering Experiment at the Sandia Scaled Wind Farm Technology (SWiFT) facility near Lubbock, Texas in 2016 and 2017 . The purpose of this document is to ensure the test objectives and procedures are sufficiently detailed such that al l involved personnel are able to contribute to the technical success of the test. This document is not intended to address safety explicitly which is addressed in a separate document listed in the referencesmore » titled Sandia SWiFT Facility Site Operations Manual . Both documents should be reviewed by all test personnel.« less

  14. Proposal for hierarchical description of software systems

    NASA Technical Reports Server (NTRS)

    Thauboth, H.

    1973-01-01

    The programming of digital computers has developed into a new dimension full of diffculties, because the hardware of computers has become so powerful that more complex applications are entrusted to computers. The costs of software development, verification, and maintenance are outpacing those of the hardware and the trend is toward futher increase of sophistication of application of computers and consequently of sophistication of software. To obtain better visibility into software systems and to improve the structure of software systems for better tests, verification, and maintenance, a clear, but rigorous description and documentation of software is needed. The purpose of the report is to extend the present methods in order to obtain a documentation that better reflects the interplay between the various components and functions of a software system at different levels of detail without losing the precision in expression. This is done by the use of block diagrams, sequence diagrams, and cross-reference charts. In the appendices, examples from an actual large sofware system, i.e. the Marshall System for Aerospace Systems Simulation (MARSYAS), are presented. The proposed documentation structure is compatible to automation of updating significant portions of the documentation for better software change control.

  15. 75 FR 1615 - Amended Record of Decision: Idaho High-Level Waste and Facilities Disposition Final Environmental...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-12

    ... DEPARTMENT OF ENERGY Amended Record of Decision: Idaho High-Level Waste and Facilities Disposition...-Level Waste and Facilities Disposition Final Environmental Impact Statement. This document corrects an... Record of Decision: Idaho High-Level Waste and Facilities [[Page 1616

  16. NASA Construction of Facilities Validation Processes - Total Building Commissioning (TBCx)

    NASA Technical Reports Server (NTRS)

    Hoover, Jay C.

    2004-01-01

    Key Atributes include: Total Quality Management (TQM) System that looks at all phases of a project. A team process that spans boundaries. A Commissioning Authority to lead the process. Commissioning requirements in contracts. Independent design review to verify compliance with Facility Project Requirements (FPR). Formal written Commissioning Plan with Documented Results. Functional performance testing (FPT) against the requirements document.

  17. Lunar base launch and landing facility conceptual design, 2nd edition

    NASA Technical Reports Server (NTRS)

    1988-01-01

    This report documents the Lunar Base Launch and Landing Facility Conceptual Design study. The purpose of this study was to examine the requirements for launch and landing facilities for early lunar bases and to prepare conceptual designs for some of these facilities. The emphasis of this study is on the facilities needed from the first manned landing until permanent occupancy. Surface characteristics and flight vehicle interactions are described, and various facility operations are related. Specific recommendations for equipment, facilities, and evolutionary planning are made, and effects of different aspects of lunar development scenarios on facilities and operations are detailed. Finally, for a given scenario, a specific conceptual design is developed and presented.

  18. 33 CFR 147.815 - ExxonMobil Hoover Floating OCS Facility safety zone.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false ExxonMobil Hoover Floating OCS... Floating OCS Facility safety zone. (a) Description. The ExxonMobil Hoover Floating OCS Facility, Alaminos... (1640.4 feet) from each point on the structure's outer edge is a safety zone. (b) Regulation. No vessel...

  19. How to implement security controls for an information security program at CBRN facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lenaeus, Joseph D.; O'Neil, Lori Ross; Leitch, Rosalyn M.

    This document was prepared by PNNL within the framework of Project 19 of the European Union Chemical Biological Radiological and Nuclear Risk Mitigation Centres of Excellence Initiative entitled, ''Development of procedures and guidelines to create and improve secure information management systems and data exchange mechanisms for CBRN materials under regulatory control.'' It provides management and workers at CBRN facilities, parent organization managers responsible for those facilities, and regulatory agencies (governmental and nongovernmental) with guidance on the best practices for protecting information security. The security mitigation approaches presented in this document were chosen because they present generally accepted guidance in anmore » easy-to-understand manner, making it easier for facility personnel to grasp key concepts and envision how security controls could be implemented by the facility. This guidance is presented from a risk management perspective.« less

  20. Environmental Management Guide for Educational Facilities

    ERIC Educational Resources Information Center

    APPA: Association of Higher Education Facilities Officers, 2017

    2017-01-01

    Since 1996, APPA and CSHEMA, the Campus Safety Health and Environmental Management Association, have collaborated to produce guidance documents to help educational facilities get ahead of the moving target that is environmental compliance. This new 2017 edition will help you identify which regulations pertain to your institution, and assist in…

  1. Facilities Guidelines. North Carolina Public Schools.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh.

    In July 1987, the North Carolina General Assembly enacted legislation to provide funds for public school construction to assist county governments in meeting their capital building needs and to provide additional funds for selected counties with the most critical school facility needs. This document, in accordance with the legislation's direction,…

  2. 2012 Annual Wastewater Reuse Report for the Idaho National Laboratory Site's Central facilities Area Sewage Treatment Plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mike Lewis

    2013-02-01

    This report describes conditions, as required by the state of Idaho Wastewater Reuse Permit (#LA-000141-03), for the wastewater land application site at Idaho National Laboratory Site’s Central Facilities Area Sewage Treatment Plant from November 1, 2011, through October 31, 2012. The report contains the following information: • Site descriptionFacility and system description • Permit required monitoring data and loading rates • Status of compliance conditions and activities • Discussion of the facility’s environmental impacts. During the 2012 permit year, no wastewater was land-applied to the irrigation area of the Central Facilities Area Sewage Treatment Plant.

  3. HEALTHCARE ENVIRONMENTAL ASSISTANCE RESOURCES: POLLUTION PREVENTION AND COMPLIANCE ASSISTANCE FOR HEALTHCARE FACILITIES

    EPA Science Inventory

    This CD ROM is a result of several healthcare guidance documents coming into existence around the same time and the need for one tool where healthcare facilities could have access to these documents and other valuable healthcare resources regardless of connection to the internet....

  4. Differences in reporting of analyses in internal company documents versus published trial reports: comparisons in industry-sponsored trials in off-label uses of gabapentin.

    PubMed

    Vedula, S Swaroop; Li, Tianjing; Dickersin, Kay

    2013-01-01

    Details about the type of analysis (e.g., intent to treat [ITT]) and definitions (i.e., criteria for including participants in the analysis) are necessary for interpreting a clinical trial's findings. Our objective was to compare the description of types of analyses and criteria for including participants in the publication (i.e., what was reported) with descriptions in the corresponding internal company documents (i.e., what was planned and what was done). Trials were for off-label uses of gabapentin sponsored by Pfizer and Parke-Davis, and documents were obtained through litigation. For each trial, we compared internal company documents (protocols, statistical analysis plans, and research reports, all unpublished), with publications. One author extracted data and another verified, with a third person verifying discordant items and a sample of the rest. Extracted data included the number of participants randomized and analyzed for efficacy, and types of analyses for efficacy and safety and their definitions (i.e., criteria for including participants in each type of analysis). We identified 21 trials, 11 of which were published randomized controlled trials, and that provided the documents needed for planned comparisons. For three trials, there was disagreement on the number of randomized participants between the research report and publication. Seven types of efficacy analyses were described in the protocols, statistical analysis plans, and publications, including ITT and six others. The protocol or publication described ITT using six different definitions, resulting in frequent disagreements between the two documents (i.e., different numbers of participants were included in the analyses). Descriptions of analyses conducted did not agree between internal company documents and what was publicly reported. Internal company documents provide extensive documentation of methods planned and used, and trial findings, and should be publicly accessible. Reporting standards

  5. Imaged document information location and extraction using an optical correlator

    NASA Astrophysics Data System (ADS)

    Stalcup, Bruce W.; Dennis, Phillip W.; Dydyk, Robert B.

    1999-12-01

    Today, the paper document is fast becoming a thing of the past. With the rapid development of fast, inexpensive computing and storage devices, many government and private organizations are archiving their documents in electronic form (e.g., personnel records, medical records, patents, etc.). Many of these organizations are converting their paper archives to electronic images, which are then stored in a computer database. Because of this, there is a need to efficiently organize this data into comprehensive and accessible information resources and provide for rapid access to the information contained within these imaged documents. To meet this need, Litton PRC and Litton Data Systems Division are developing a system, the Imaged Document Optical Correlation and Conversion System (IDOCCS), to provide a total solution to the problem of managing and retrieving textual and graphic information from imaged document archives. At the heart of IDOCCS, optical correlation technology provide a means for the search and retrieval of information from imaged documents. IDOCCS can be used to rapidly search for key words or phrases within the imaged document archives and has the potential to determine the types of languages contained within a document. In addition, IDOCCS can automatically compare an input document with the archived database to determine if it is a duplicate, thereby reducing the overall resources required to maintain and access the document database. Embedded graphics on imaged pages can also be exploited, e.g., imaged documents containing an agency's seal or logo can be singled out. In this paper, we present a description of IDOCCS as well as preliminary performance results and theoretical projections.

  6. High Temperature Test Facility Preliminary RELAP5-3D Input Model Description

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bayless, Paul David

    A RELAP5-3D input model is being developed for the High Temperature Test Facility at Oregon State University. The current model is described in detail. Further refinements will be made to the model as final as-built drawings are released and when system characterization data are available for benchmarking the input model.

  7. The TRIGA Reactor Facility at the Armed Forces Radiobiology Research Institute: A Simplified Technical Description.

    DTIC Science & Technology

    1986-05-01

    COUNT Technical FROM_ TO May 1986 20 16. SUPPLEMENTARY NOTATION 17. COSATI CODES 18. SUBJECT TERMS iConitinue on reverse if neceasary and identify by...Reactor, Modes of Operation, The AFRRI Reactor, Exposure Facilities, and Cerenkov Radiation. I- 20 DISTRISUTIONIAVAILABILITY OF ABSTRACT 21. ABSTRACT...6 Exposure Facilities 12 Cerenkov Radiation 17 Acoessiofl For NTIS GRA&I DT.C TABUnamnnounced [] UusnriOfltond -. By IZ Distribution/ Availability

  8. Status of the National Transonic Facility Characterization

    NASA Technical Reports Server (NTRS)

    Bobbitt, C., Jr.; Everhart, J.

    2001-01-01

    This paper describes the current activities at the National Transonic Facility to document the test-section flow and to support tunnel improvements. The paper is divided into sections on the tunnel calibration, flow quality measurements, data quality assurance, and implementation of wall interference corrections.

  9. When Disaster Strikes: How School Facilities Can Cope with the Unthinkable

    ERIC Educational Resources Information Center

    Dufresne, Ray

    2009-01-01

    In the wake of a major disaster, damage assessment can be particularly challenging for organizations with dozens or even hundreds of affected properties. Those with well-documented information about predisaster facility conditions can more readily pinpoint those facilities that are at the greatest risk of damage and to determine how to prioritize…

  10. Impact of Electronic Health Records on Long-Term Care Facilities: Systematic Review

    PubMed Central

    Mileski, Michael; Vijaykumar, Alekhya Ganta; Viswanathan, Sneha Vishnampet; Suskandla, Ujwala; Chidambaram, Yazhini

    2017-01-01

    Background Long-term care (LTC) facilities are an important part of the health care industry, providing care to the fastest-growing group of the population. However, the adoption of electronic health records (EHRs) in LTC facilities lags behind other areas of the health care industry. One of the reasons for the lack of widespread adoption in the United States is that LTC facilities are not eligible for incentives under the Meaningful Use program. Implementation of an EHR system in an LTC facility can potentially enhance the quality of care, provided it is appropriately implemented, used, and maintained. Unfortunately, the lag in adoption of the EHR in LTC creates a paucity of literature on the benefits of EHR implementation in LTC facilities. Objective The objective of this systematic review was to identify the potential benefits of implementing an EHR system in LTC facilities. The study also aims to identify the common conditions and EHR features that received favorable remarks from providers and the discrepancies that needed improvement to build up momentum across LTC settings in adopting this technology. Methods The authors conducted a systematic search of PubMed, Cumulative Index of Nursing and Allied Health (CINAHL), and MEDLINE databases. Papers were analyzed by multiple referees to filter out studies not germane to our research objective. A final sample of 28 papers was selected to be included in the systematic review. Results Results of this systematic review conclude that EHRs show significant improvement in the management of documentation in LTC facilities and enhanced quality outcomes. Approximately 43% (12/28) of the papers reported a mixed impact of EHRs on the management of documentation, and 33% (9/28) of papers reported positive quality outcomes using EHRs. Surprisingly, very few papers demonstrated an impact on patient satisfaction, physician satisfaction, the length of stay, and productivity using EHRs. Conclusions Overall, implementation of EHRs

  11. Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

    DOEpatents

    Sanfilippo, Antonio [Richland, WA; Calapristi, Augustin J [West Richland, WA; Crow, Vernon L [Richland, WA; Hetzler, Elizabeth G [Kennewick, WA; Turner, Alan E [Kennewick, WA

    2009-12-22

    Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

  12. Data Element Dictionary: Facilities. Second Edition.

    ERIC Educational Resources Information Center

    Martin, James S.

    This document is intended to serve as a guide for institutions in the development of data bases to support the implementation of planning and management systems. This publication serves to identify and describe those facilities-related data elements: (1) required to support current National Center for Higher Education Management Systems (NCHEMS)…

  13. Composite analysis E-area vaults and saltstone disposal facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cook, J.R.

    1997-09-01

    This report documents the Composite Analysis (CA) performed on the two active Savannah River Site (SRS) low-level radioactive waste (LLW) disposal facilities. The facilities are the Z-Area Saltstone Disposal Facility and the E-Area Vaults (EAV) Disposal Facility. The analysis calculated potential releases to the environment from all sources of residual radioactive material expected to remain in the General Separations Area (GSA). The GSA is the central part of SRS and contains all of the waste disposal facilities, chemical separations facilities and associated high-level waste storage facilities as well as numerous other sources of radioactive material. The analysis considered 114 potentialmore » sources of radioactive material containing 115 radionuclides. The results of the CA clearly indicate that continued disposal of low-level waste in the saltstone and EAV facilities, consistent with their respective radiological performance assessments, will have no adverse impact on future members of the public.« less

  14. Data development technical support document for the aircraft crash risk analysis methodology (ACRAM) standard

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kimura, C.Y.; Glaser, R.E.; Mensing, R.W.

    1996-08-01

    The Aircraft Crash Risk Analysis Methodology (ACRAM) Panel has been formed by the US Department of Energy Office of Defense Programs (DOE/DP) for the purpose of developing a standard methodology for determining the risk from aircraft crashes onto DOE ground facilities. In order to accomplish this goal, the ACRAM panel has been divided into four teams, the data development team, the model evaluation team, the structural analysis team, and the consequence team. Each team, consisting of at least one member of the ACRAM plus additional DOE and DOE contractor personnel, specializes in the development of the methodology assigned to thatmore » team. This report documents the work performed by the data development team and provides the technical basis for the data used by the ACRAM Standard for determining the aircraft crash frequency. This report should be used to provide the generic data needed to calculate the aircraft crash frequency into the facility under consideration as part of the process for determining the aircraft crash risk to ground facilities as given by the DOE Standard Aircraft Crash Risk Assessment Methodology (ACRAM). Some broad guidance is presented on how to obtain the needed site-specific and facility specific data but this data is not provided by this document.« less

  15. 2011 Annual Wastewater Reuse Report for the Idaho National Laboratory Site’s Central Facilities Area Sewage Treatment Plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Michael G. Lewis

    2012-02-01

    This report describes conditions, as required by the state of Idaho Wastewater Reuse Permit (LA-000141-03), for the wastewater land application site at Idaho National Laboratory Site's Central Facilities Area Sewage Treatment Plant from November 1, 2010, through October 31, 2011. The report contains the following information: (1) Site description; (2) Facility and system description; (3) Permit required monitoring data and loading rates; (4) Status of special compliance conditions and activities; and (5) Discussion of the facility's environmental impacts. During the 2011 permit year, approximately 1.22 million gallons of treated wastewater was land-applied to the irrigation area at Central Facilities Areamore » Sewage Treatment plant.« less

  16. Annotating image ROIs with text descriptions for multimodal biomedical document retrieval

    NASA Astrophysics Data System (ADS)

    You, Daekeun; Simpson, Matthew; Antani, Sameer; Demner-Fushman, Dina; Thoma, George R.

    2013-01-01

    Regions of interest (ROIs) that are pointed to by overlaid markers (arrows, asterisks, etc.) in biomedical images are expected to contain more important and relevant information than other regions for biomedical article indexing and retrieval. We have developed several algorithms that localize and extract the ROIs by recognizing markers on images. Cropped ROIs then need to be annotated with contents describing them best. In most cases accurate textual descriptions of the ROIs can be found from figure captions, and these need to be combined with image ROIs for annotation. The annotated ROIs can then be used to, for example, train classifiers that separate ROIs into known categories (medical concepts), or to build visual ontologies, for indexing and retrieval of biomedical articles. We propose an algorithm that pairs visual and textual ROIs that are extracted from images and figure captions, respectively. This algorithm based on dynamic time warping (DTW) clusters recognized pointers into groups, each of which contains pointers with identical visual properties (shape, size, color, etc.). Then a rule-based matching algorithm finds the best matching group for each textual ROI mention. Our method yields a precision and recall of 96% and 79%, respectively, when ground truth textual ROI data is used.

  17. Econ's optimal decision model of wheat production and distribution-documentation

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The report documents the computer programs written to implement the ECON optical decision model. The programs were written in APL, an extremely compact and powerful language particularly well suited to this model, which makes extensive use of matrix manipulations. The algorithms used are presented and listings of and descriptive information on the APL programs used are given. Possible changes in input data are also given.

  18. Writer identification on historical Glagolitic documents

    NASA Astrophysics Data System (ADS)

    Fiel, Stefan; Hollaus, Fabian; Gau, Melanie; Sablatnig, Robert

    2013-12-01

    This work aims at automatically identifying scribes of historical Slavonic manuscripts. The quality of the ancient documents is partially degraded by faded-out ink or varying background. The writer identification method used is based on image features, which are described with Scale Invariant Feature Transform (SIFT) features. A visual vocabulary is used for the description of handwriting characteristics, whereby the features are clustered using a Gaussian Mixture Model and employing the Fisher kernel. The writer identification approach is originally designed for grayscale images of modern handwritings. But contrary to modern documents, the historical manuscripts are partially corrupted by background clutter and water stains. As a result, SIFT features are also found on the background. Since the method shows also good results on binarized images of modern handwritings, the approach was additionally applied on binarized images of the ancient writings. Experiments show that this preprocessing step leads to a significant performance increase: The identification rate on binarized images is 98.9%, compared to an identification rate of 87.6% gained on grayscale images.

  19. Comprehensive Planning Resource Document, 1990-91, for the Kern Community College District.

    ERIC Educational Resources Information Center

    Cook, Lauraine

    This compilation of resources for district planning in 1990-91 provides an overview of demographic, personnel, financial, facilities, and curriculum issues for the Kern Community College District (California) and its member institutions, Bakersfield, Cerro Coso, and Porterville colleges. The 10 sections of the document cover: (1) General…

  20. [Written information for patients: From papers to documents].

    PubMed

    Cortés-Criado, M C

    2014-01-01

    There is a high variability in the level of information intended for patients, with different content, format and presentation. To determine the perceived safety of the patients treated at the Country Hospital of Melilla (HCML) and to assess the quality of the documents using criteria adapted to the «International Patient Decision Aid Standards» (IPDAS). Descriptive study of the documents given to patients by the HCML. They included questionnaires on perceived safety, classification of the documents, and the level of adherence to the IPDAS criteria. The Information given to patients during their stay in the HCML, their participation in decision-making, and the information about medication, did not exceed the average on the acceptance scale. Only 40 documents were studied (of the 131 collected), on being published in-house, and were classified, following the definitions of the RAE, into instructions (20), recommendations (14) and guidelines (6). Of these, only the 27.5% showed hospital logo. In the content analysis according to the IPDAS criteria, there was an overall adherence rate of 24.1% in instructions, 24.8% in recommendations, and 61.5% in guidelines. The perception of patient safety expressed in the questionnaire, and its assessment according IPDAS criteria, shows there may be a significant improvement within the organization. Furthermore, the quality of patient documentation provided can help decision making. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.