Synthetic Fiber Production Facilities: New Source Performance Standards (NSPS)

EPA Pesticide Factsheets

These standards limits emissions of volatile organic compounds (VOC) from new and reconstructed synthetic fiber production facilities that use solvent-spinning processes. Includes rule history and summary.

46 CFR 162.050-15 - Designation of facilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... This is the mean and standard deviation, respectively, of the differences between the known sample... sample analysis, and the materials necessary to perform the tests; (2) Each facility test rig must be of... facilities. (a) Each request for designation as a facility authorized to perform approval tests must be...

40 CFR 408.175 - Standards of performance for new sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mechanized Salmon Processing Subcategory § 408.175 Standards of performance for new sources. (a) The...: (1) Any mechanized salmon processing facility located in population or processing centers including... grease 28 10 pH (1) (1) 1 Within the range 6.0 to 9.0. (2) Any mechanized salmon processing facility not...

40 CFR 408.175 - Standards of performance for new sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mechanized Salmon Processing Subcategory § 408.175 Standards of performance for new sources. (a) The...: (1) Any mechanized salmon processing facility located in population or processing centers including... grease 28 10 pH (1) (1) 1 Within the range 6.0 to 9.0. (2) Any mechanized salmon processing facility not...

40 CFR 60.474 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... compliance with the mass standard for the blowing still. If the Administrator finds that the facility was in compliance with the mass standard during the performance test but failed to meet the zero opacity standard... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Asphalt...

40 CFR 60.474 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... compliance with the mass standard for the blowing still. If the Administrator finds that the facility was in compliance with the mass standard during the performance test but failed to meet the zero opacity standard... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Asphalt...

40 CFR 60.474 - Test methods and procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... a finding concerning compliance with the mass standard for the blowing still. If the Administrator finds that the facility was in compliance with the mass standard during the performance test but failed... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Asphalt...

40 CFR 60.474 - Test methods and procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... a finding concerning compliance with the mass standard for the blowing still. If the Administrator finds that the facility was in compliance with the mass standard during the performance test but failed... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Asphalt...

40 CFR 60.474 - Test methods and procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... a finding concerning compliance with the mass standard for the blowing still. If the Administrator finds that the facility was in compliance with the mass standard during the performance test but failed... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Asphalt...

Radiation and Health Technology Laboratory Capabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bihl, Donald E.; Lynch, Timothy P.; Murphy, Mark K.

2005-07-09

The Radiological Standards and Calibrations Laboratory, a part of Pacific Northwest National Laboratory (PNNL)(a) performs calibrations and upholds reference standards necessary to maintain traceability to national standards. The facility supports U.S. Department of Energy (DOE) programs at the Hanford Site, programs sponsored by DOE Headquarters and other federal agencies, radiological protection programs at other DOE and commercial nuclear sites and research and characterization programs sponsored through the commercial sector. The laboratory is located in the 318 Building of the Hanford Site's 300 Area. The facility contains five major exposure rooms and several laboratories used for exposure work preparation, low-activity instrumentmore » calibrations, instrument performance evaluations, instrument maintenance, instrument design and fabrication work, thermoluminescent and radiochromic Dosimetry, and calibration of measurement and test equipment (M&TE). The major exposure facilities are a low-scatter room used for neutron and photon exposures, a source well room used for high-volume instrument calibration work, an x-ray facility used for energy response studies, a high-exposure facility used for high-rate photon calibration work, a beta standards laboratory used for beta energy response studies and beta reference calibrations and M&TE laboratories. Calibrations are routinely performed for personnel dosimeters, health physics instrumentation, photon and neutron transfer standards alpha, beta, and gamma field sources used throughout the Hanford Site, and a wide variety of M&TE. This report describes the standards and calibrations laboratory.« less

40 CFR 60.143 - Monitoring of operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... which the affected facility demonstrated compliance with the mass standards under § 60.142(a)(1), (b)(1... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary...

40 CFR 60.143 - Monitoring of operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... which the affected facility demonstrated compliance with the mass standards under § 60.142(a)(1), (b)(1... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary...

40 CFR 60.143 - Monitoring of operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... which the affected facility demonstrated compliance with the mass standards under § 60.142(a)(1), (b)(1... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary...

40 CFR 60.91 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt Facilities § 60.91... Act and in subpart A of this part. (a) Hot mix asphalt facility means any facility, as described in § 60.90, used to manufacture hot mix asphalt by heating and drying aggregate and mixing with asphalt...

40 CFR 60.91 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt Facilities § 60.91... Act and in subpart A of this part. (a) Hot mix asphalt facility means any facility, as described in § 60.90, used to manufacture hot mix asphalt by heating and drying aggregate and mixing with asphalt...

40 CFR 60.91 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt Facilities § 60.91... Act and in subpart A of this part. (a) Hot mix asphalt facility means any facility, as described in § 60.90, used to manufacture hot mix asphalt by heating and drying aggregate and mixing with asphalt...

40 CFR 60.91 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt Facilities § 60.91... Act and in subpart A of this part. (a) Hot mix asphalt facility means any facility, as described in § 60.90, used to manufacture hot mix asphalt by heating and drying aggregate and mixing with asphalt...

40 CFR 60.91 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt Facilities § 60.91... Act and in subpart A of this part. (a) Hot mix asphalt facility means any facility, as described in § 60.90, used to manufacture hot mix asphalt by heating and drying aggregate and mixing with asphalt...

42 CFR 493.1100 - Condition: Facility administration.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Condition: Facility administration. 493.1100... SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Facility Administration for Nonwaived Testing § 493.1100 Condition: Facility administration. Each laboratory that performs nonwaived...

40 CFR 60.263 - Standard for carbon monoxide.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for carbon monoxide. 60.263 Section 60.263 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Ferroalloy Production Facilities § 60.263 Standard for carbo...

40 CFR 60.263 - Standard for carbon monoxide.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standard for carbon monoxide. 60.263 Section 60.263 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Ferroalloy Production Facilities § 60.263 Standard for carbo...

40 CFR 60.263 - Standard for carbon monoxide.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standard for carbon monoxide. 60.263 Section 60.263 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Ferroalloy Production Facilities § 60.263 Standard for carbo...

40 CFR 60.260 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... affected facility. 60.260 Section 60.260 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Ferroalloy Production Facilities § 60.260 Applicability and designation of affected facility..., ferrochrome silicon, silvery iron, high-carbon ferrochrome, charge chrome, standard ferromanganese...

40 CFR 60.260 - Applicability and designation of affected facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... affected facility. 60.260 Section 60.260 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Performance for Ferroalloy Production Facilities § 60.260 Applicability and designation of affected facility..., ferrochrome silicon, silvery iron, high-carbon ferrochrome, charge chrome, standard ferromanganese...

Assessing patient safety in Canadian ambulatory surgery facilities: A national survey

PubMed Central

Ahmad, Jamil; Ho, Olivia A; Carman, Wayne W; Thoma, Achilles; Lalonde, Donald H; Lista, Frank

2014-01-01

BACKGROUND: There has been increased interest regarding patient safety and standards of care in Canadian ambulatory surgery facilities where surgical procedures are performed. The Canadian Association for Accreditation of Ambulatory Surgical Facilities (CAAASF) is a national organization formed to establish and maintain standards to ensure that surgical procedures conducted outside of public hospitals are performed safely. OBJECTIVE: To determine how many procedures are performed annually at CAAASF member sites, and to examine complication rates and several key patient safety practices. METHODS: All 69 facilities accredited by the CAAASF were surveyed. The survey focused on procedural data, complication rates and patient safety interventions. RESULTS: In 2010, 40,240 estimated procedures were performed. A total of 263 (0.007%) complications were reported. Sixteen (0.0004%) patients required reoperations in hospital and 19 (0.0004%) patients required transfer to hospital on the day of surgery. There were only two mortalities within 30 days of surgery reported in the past five years. With regard to patient safety practices, 93% used antimicrobial prophylaxis, 100% used strategies to maintain normothermia and 82% used measures for venous thromboembolism prevention. CONCLUSION: The present study is the first to report on the Canadian experience in ambulatory surgery facilities and provides insight into current practices at these facilities. Appropriate accreditation of ambulatory surgery facilities, well-established patient safety-related standards of care, careful patient selection and procedures performed by qualified health care professionals with appropriate certification practicing within the scope of their practice form the basis for safe and effective ambulatory surgery. PMID:25152645

40 CFR 430.45 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Dissolving Sulfite Subcategory... dissolving sulfite pulp facilities where nitration grade pulp is produced] Pollutant or pollutant property Kg... dissolving sulfite pulp facilities where viscose grade pulp is produced] Pollutant or pollutant property Kg...

40 CFR 60.261 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... electric submerged arc furnace to become subject to a different mass standard applicable under this subpart... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Ferroalloy Production Facilities § 60.261...

40 CFR 60.261 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... electric submerged arc furnace to become subject to a different mass standard applicable under this subpart... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Ferroalloy Production Facilities § 60.261...

40 CFR 60.261 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... electric submerged arc furnace to become subject to a different mass standard applicable under this subpart... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Ferroalloy Production Facilities § 60.261...

40 CFR 60.261 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... electric submerged arc furnace to become subject to a different mass standard applicable under this subpart... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Ferroalloy Production Facilities § 60.261...

40 CFR 60.261 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... electric submerged arc furnace to become subject to a different mass standard applicable under this subpart... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Ferroalloy Production Facilities § 60.261...

A Step Towards Electric Propulsion Testing Standards: Pressure Measurements and Effective Pumping Speeds

NASA Technical Reports Server (NTRS)

Dankanich, John W.; Swiatek, Michael W.; Yim, John T.

2012-01-01

The electric propulsion community has been implored to establish and implement a set of universally applicable test standards during the research, development, and qualification of electric propulsion systems. Existing practices are fallible and result in testing variations which leads to suspicious results, large margins in application, or aversion to mission infusion. Performance measurements and life testing under appropriate conditions can be costly and lengthy. Measurement practices must be consistent, accurate, and repeatable. Additionally, the measurements must be universally transportable across facilities throughout the development, qualification, spacecraft integration and on-orbit performance. A preliminary step to progress towards universally applicable testing standards is outlined for facility pressure measurements and effective pumping speed calculations. The standard has been applied to multiple facilities at the NASA Glenn Research Center. Test results and analyses of universality of measurements are presented herein.

40 CFR 430.45 - New source performance standards (NSPS).

Code of Federal Regulations, 2012 CFR

2012-07-01

... GUIDELINES AND STANDARDS (CONTINUED) THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Dissolving Sulfite... biocides: Subpart D [NSPS for dissolving sulfite pulp facilities where nitration grade pulp is produced... all times. Subpart D [NSPS for dissolving sulfite pulp facilities where viscose grade pulp is produced...

40 CFR 430.75 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Mechanical Pulp Subcategory § 430.75 New source performance standards (NSPS). (a) The following applies to mechanical pulp...-mechanical process; mechanical pulp facilities where the integrated production of pulp and coarse paper...

Association between access to accelerated partial breast irradiation and use of adjuvant radiotherapy.

PubMed

Wang, Elyn H; Park, Henry S; Rutter, Charles E; Gross, Cary P; Soulos, Pamela R; Yu, James B; Evans, Suzanne B

2017-02-01

The current study was performed to determine whether access to facilities performing accelerated partial breast irradiation (APBI) is associated with differences in the use of adjuvant radiotherapy (RT). Using the National Cancer Data Base, the authors performed a retrospective study of women aged ≥50 years who were diagnosed with early-stage breast cancer between 2004 and 2013 and treated with breast-conserving surgery (BCS). Facilities performing APBI in ≥10% of their eligible patients within a given year were defined as APBI facilities whereas those not performing APBI were defined as non-APBI facilities. All other facilities were excluded. The authors identified independent factors associated with RT use using multivariable logistic regression with clustering in the overall sample as well as in subsets of patients with standard-risk invasive cancer, low-risk invasive cancer, and ductal carcinoma in situ. Among 222,544 patients, 76.6% underwent BCS plus RT and 23.4% underwent BCS alone. The likelihood of RT receipt in the overall sample did not appear to differ significantly between APBI and non-APBI facilities (adjusted odds ratio [AOR], 1.02; P = .61). Subgroup multivariable analysis demonstrated that among patients with standard-risk invasive cancer, there was no association between evaluation at an APBI facility and receipt of RT (AOR, 0.98; P = .69). However, patients with low-risk invasive cancer were found to be significantly more likely to receive RT (54.4% vs 59.5%; AOR, 1.22 [P<.001]), whereas patients with ductal carcinoma in situ were less likely to receive RT (56.9% vs 55.3%; AOR, 0.89 [P = .04]) at APBI facilities. Patients who were eligible for observation were more likely to receive RT in APBI facilities but no difference was observed among patients with standard-risk invasive cancer who would most benefit from RT. Cancer 2017;123:502-511. © 2016 American Cancer Society. © 2016 American Cancer Society.

Breast MRI in community practice: equipment and imaging techniques at facilities in the Breast Cancer Surveillance Consortium.

PubMed

DeMartini, Wendy B; Ichikawa, Laura; Yankaskas, Bonnie C; Buist, Diana; Kerlikowske, Karla; Geller, Berta; Onega, Tracy; Rosenberg, Robert D; Lehman, Constance D

2010-11-01

MRI is increasingly used for the detection of breast carcinoma. Little is known about breast MRI techniques among community practice facilities. The aim of this study was to evaluate equipment and acquisition techniques used by community facilities across the United States, including compliance with minimum standards by the ACRIN® 6667 Trial and the European Society of Breast Imaging. Breast Cancer Surveillance Consortium facilities performing breast MRI were identified and queried by survey regarding breast MRI equipment and technical parameters. Variables included scanner field strength, coil type, acquisition coverage, slice thickness, and the timing of the initial postcontrast sequence. Results were tallied and percentages of facilities meeting ACRIN® and European Society of Breast Imaging standards were calculated. From 23 facilities performing breast MRI, results were obtained from 14 (61%) facilities with 16 MRI scanners reporting 18 imaging parameters. Compliance with equipment recommendations of ≥1.5-T field strength was 94% and of a dedicated breast coil was 100%. Eighty-three percent of acquisitions used bilateral postcontrast techniques, and 78% used slice thickness≤3 mm. The timing of initial postcontrast sequences ranged from 58 seconds to 8 minutes 30 seconds, with 63% meeting recommendations for completion within 4 minutes. Nearly all surveyed facilities met ACRIN and European Society of Breast Imaging standards for breast MRI equipment. The majority met standards for acquisition parameters, although techniques varied, in particular for the timing of initial postcontrast imaging. Further guidelines by the ACR Breast MRI Accreditation Program will be of importance in facilitating standardized and high-quality breast MRI. Copyright © 2010 American College of Radiology. Published by Elsevier Inc. All rights reserved.

40 CFR 60.2070 - What are the operator training and qualification requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of... operated unless a fully trained and qualified CISWI unit operator is accessible, either at the facility or can be at the facility within 1 hour. The trained and qualified CISWI unit operator may operate the...

40 CFR 60.2070 - What are the operator training and qualification requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of... operated unless a fully trained and qualified CISWI unit operator is accessible, either at the facility or can be at the facility within 1 hour. The trained and qualified CISWI unit operator may operate the...

Synthetic fiber production facilities: Background information for proposed standards

NASA Astrophysics Data System (ADS)

Goodwin, D. R.

1982-10-01

Standards of performance to control emissions of volatile organic compounds (VOC) from new, modified, and reconstructed synthetic fiber production facilities are being proposed under section III of the Clean Air Act. This document contains information on the background and authority, regulatory alternatives considered, and environmental and economic impacts of the regulatory alternatives.

Polymeric Coating of Supporting Substrates Facilities: New Source Performance Standards (NSPS)

EPA Pesticide Factsheets

Learn more about the New Source Performance Standards (NSPS) rule for polymeric coating by reading the rule summary, rule history and the code of federal regulations subpart. Information on related rules is also on this page.

Analyses in Support of Risk-Informed Natural Gas Vehicle Maintenance Facility Codes and Standards: Phase II.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blaylock, Myra L.; LaFleur, Chris Bensdotter; Muna, Alice Baca

Safety standards development for maintenance facilities of liquid and compressed natural gas fueled vehicles is required to ensure proper facility design and operating procedures. Standard development organizations are utilizing risk-informed concepts to develop natural gas vehicle (NGV) codes and standards so that maintenance facilities meet acceptable risk levels. The present report summarizes Phase II work for existing NGV repair facility code requirements and highlights inconsistencies that need quantitative analysis into their effectiveness. A Hazardous and Operability study was performed to identify key scenarios of interest using risk ranking. Detailed simulations and modeling were performed to estimate the location and behaviormore » of natural gas releases based on these scenarios. Specific code conflicts were identified, and ineffective code requirements were highlighted and resolutions proposed. These include ventilation rate basis on area or volume, as well as a ceiling offset which seems ineffective at protecting against flammable gas concentrations. ACKNOWLEDGEMENTS The authors gratefully acknowledge Bill Houf (SNL -- Retired) for his assistance with the set-up and post-processing of the numerical simulations. The authors also acknowledge Doug Horne (retired) for his helpful discussions. We would also like to acknowledge the support from the Clean Cities program of DOE's Vehicle Technology Office.« less

40 CFR 60.603 - Performance test and compliance provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for... Solvent Contained in the Solvent Feed Holding Tank. (ii) Measure and record the amount of polymer introduced into the affected facility and the solvent-to-polymer ratio of the spinning solutions, and use the...

40 CFR 265.16 - Personnel training.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Personnel training. 265.16 Section 265... FACILITIES General Facility Standards § 265.16 Personnel training. (a)(1) Facility personnel must successfully complete a program of classroom instruction or on-the-job training that teaches them to perform...

14 CFR 171.265 - Glide path performance requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... impressed on the microwave carrier of the radiated glide slope signal in the form of a unique summation of... TRANSPORTATION (CONTINUED) NAVIGATIONAL FACILITIES NON-FEDERAL NAVIGATION FACILITIES Interim Standard Microwave... assumption that the aircraft is heading directly toward the facility. (a) The glide slope antenna system must...

14 CFR 171.265 - Glide path performance requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... impressed on the microwave carrier of the radiated glide slope signal in the form of a unique summation of... TRANSPORTATION (CONTINUED) NAVIGATIONAL FACILITIES NON-FEDERAL NAVIGATION FACILITIES Interim Standard Microwave... assumption that the aircraft is heading directly toward the facility. (a) The glide slope antenna system must...

14 CFR 171.265 - Glide path performance requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... impressed on the microwave carrier of the radiated glide slope signal in the form of a unique summation of... TRANSPORTATION (CONTINUED) NAVIGATIONAL FACILITIES NON-FEDERAL NAVIGATION FACILITIES Interim Standard Microwave... assumption that the aircraft is heading directly toward the facility. (a) The glide slope antenna system must...

14 CFR 171.265 - Glide path performance requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... impressed on the microwave carrier of the radiated glide slope signal in the form of a unique summation of... TRANSPORTATION (CONTINUED) NAVIGATIONAL FACILITIES NON-FEDERAL NAVIGATION FACILITIES Interim Standard Microwave... assumption that the aircraft is heading directly toward the facility. (a) The glide slope antenna system must...

40 CFR 440.14 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (2) In the event that the annual precipitation falling on the treatment facility and the drainage area contributing surface runoff to the treatment facility exceeds the annual evaporation, a volume of water equal to the difference between annual precipitation falling on the treatment facility and the...

40 CFR 60.47Da - Commercial demonstration permit.

Code of Federal Regulations, 2013 CFR

2013-07-01

... electrical generation capacity for any one technology category, and the total equivalent MW electrical... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Electric Utility... affected facility proposing to demonstrate an emerging technology may apply to the Administrator for a...

40 CFR 60.47Da - Commercial demonstration permit.

Code of Federal Regulations, 2014 CFR

2014-07-01

... electrical generation capacity for any one technology category, and the total equivalent MW electrical... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Electric Utility... affected facility proposing to demonstrate an emerging technology may apply to the Administrator for a...

40 CFR 60.47Da - Commercial demonstration permit.

Code of Federal Regulations, 2012 CFR

2012-07-01

... electrical generation capacity for any one technology category, and the total equivalent MW electrical... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Electric Utility... affected facility proposing to demonstrate an emerging technology may apply to the Administrator for a...

40 CFR 60.500 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Performance for Bulk Gasoline Terminals § 60.500 Applicability and designation of affected facility. (a) The... bulk gasoline terminal which deliver liquid product into gasoline tank trucks. (b) Each facility under... technologies (BDT). The numerical emission limits in this standard are expressed in terms of total organic...

40 CFR 60.500 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Performance for Bulk Gasoline Terminals § 60.500 Applicability and designation of affected facility. (a) The... bulk gasoline terminal which deliver liquid product into gasoline tank trucks. (b) Each facility under... technologies (BDT). The numerical emission limits in this standard are expressed in terms of total organic...

40 CFR 440.44 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... December 3, 1982. (2) In the event that the annual precipitation falling on the treatment facility and the drainage area contributing surface runoff to the treatment facility exceeds the annual evaporation, a volume of water equal to the difference between annual precipitation falling on the treatment facility...

CSER-98-002: Criticality analysis for the storage of special nuclear material sources and standards in the WRAP facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

GOLDBERG, H.J.

1999-05-18

The Waste Receiving and Processing (WRAP) Facility will store uranium and transuranic (TRU) sources and standards for certification that WRAP meets the requirements of the Quality Assurance Program Plan (QAPP) for the Waste Isolation Pilot Plant (WIPP). In addition, WRAP must meet internal requirements for testing and validation of measuring instruments for nondestructive assay (NDA). In order to be certified for WIPP, WRAP will participate in the NDA Performance Demonstration Program (PDP). This program is a blind test of the NDA capabilities for TRU waste. It is intended to ensure that the NDA capabilities of this facility satisfy the requirementsmore » of the quality assurance program plan for the WIPP. The PDP standards have been provided by the Los Alamos National Laboratory (LANL) for this program. These standards will be used in the WRAP facility.« less

40 CFR 60.93 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Test methods and procedures. 60.93... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt Facilities § 60.93 Test methods and procedures. (a) In conducting the performance tests required in § 60.8...

10 CFR 26.127 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., implement, and maintain written standard operating procedures for each assay performed for drug and specimen... facility shall develop, implement, and maintain written standard operating procedures for each test. The...; (2) Preparation of reagents, standards, and controls; (3) Calibration procedures; (4) Derivation of...

10 CFR 26.127 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., implement, and maintain written standard operating procedures for each assay performed for drug and specimen... facility shall develop, implement, and maintain written standard operating procedures for each test. The...; (2) Preparation of reagents, standards, and controls; (3) Calibration procedures; (4) Derivation of...

10 CFR 26.127 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., implement, and maintain written standard operating procedures for each assay performed for drug and specimen... facility shall develop, implement, and maintain written standard operating procedures for each test. The...; (2) Preparation of reagents, standards, and controls; (3) Calibration procedures; (4) Derivation of...

The new standard of fluids for hemodialysis in Japan.

PubMed

Kawanishi, Hideki; Masakane, Ikuto; Tomo, Tadashi

2009-01-01

The standard of fluids for hemodialysis is being evaluated by the International Organization for Standardization (ISO), and will be decided within a few years. In 2008, the Japanese Society for Dialysis Therapy (JSDT) proposed the standard of fluids for hemodialysis by taking the draft ISO standard into consideration and the circumstances in Japan. It was characteristically a standard for Japan, where the central dialysis fluid delivery system (CDDS) is routinely used. In addition, the therapeutic application of each dialysis fluid is clarified. Since high-performance dialyzers are frequently employed in Japan, the standard recommends that ultrapure dialysis fluid be used for all dialysis modalities at all dialysis facilities. It also recommends that the dialysis equipment safety management committee at each facility validate the microbiological qualities of online-prepared substitution fluid, making the responsibility of the dialysis facility clear. This standard is more rigid than those of other countries, and is expected to contribute to improvements in the survival outcome of dialysis patients. (c) 2009 S. Karger AG, Basel.

40 CFR 60.40b - Applicability and delegation of authority.

Code of Federal Regulations, 2012 CFR

2012-07-01

... applicability requirements under subpart D (Standards of performance for fossil-fuel-fired steam generators... meeting the applicability requirements under subpart D (Standards of performance for fossil-fuel-fired... fossil fuel. If the affected facility (i.e. heat recovery steam generator) is subject to this subpart...

40 CFR 60.40b - Applicability and delegation of authority.

Code of Federal Regulations, 2014 CFR

2014-07-01

... applicability requirements under subpart D (Standards of performance for fossil-fuel-fired steam generators... meeting the applicability requirements under subpart D (Standards of performance for fossil-fuel-fired... fossil fuel. If the affected facility (i.e. heat recovery steam generator) is subject to this subpart...

40 CFR 60.40b - Applicability and delegation of authority.

Code of Federal Regulations, 2013 CFR

2013-07-01

... applicability requirements under subpart D (Standards of performance for fossil-fuel-fired steam generators... meeting the applicability requirements under subpart D (Standards of performance for fossil-fuel-fired... fossil fuel. If the affected facility (i.e. heat recovery steam generator) is subject to this subpart...

40 CFR 60.720 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Industrial Surface Coating: Surface Coating of Plastic Parts for Business Machines § 60.720... in which plastic parts for use in the manufacture of business machines receive prime coats, color...

Do K-12 School Facilities Affect Education Outcomes? Staff Information Report.

ERIC Educational Resources Information Center

Young, Ed; Green, Harry A.; Roehrich-Patrick, Lynnisse; Joseph, Linda; Gibson, Teresa

This report explains that there is growing evidence of a correlation between the adequacy of a school facility and student behavior and performance. In general, students attending school in newer, betterfacilities score 5 to 17 points higher on standardized tests than those attending in substandard buildings. School facility factors such as…

Performance testing of radiobioassay laboratories: In vivo measurements, Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacLellan, J.A.; Traub, R.J.; Olsen, P.C.

1990-04-01

A study of two rounds of in vivo laboratory performance testing was undertaken by Pacific Northwest Laboratory (PNL) to determine the appropriateness of the in vivo performance criteria of draft American National Standards Institute (ANSI) standard ANSI N13.3, Performance Criteria for Bioassay.'' The draft standard provides guidance to in vivo counting facilities regarding the sensitivity, precision, and accuracy of measurements for certain categories of commonly assayed radionuclides and critical regions of the body. This report concludes the testing program by presenting the results of the Round Two testing. Testing involved two types of measurements: chest counting for radionuclide detection inmore » the lung, and whole body counting for detection of uniformly distributed material. Each type of measurement was further divided into radionuclide categories as defined in the draft standard. The appropriateness of the draft standard criteria by measuring a laboratory's ability to attain them were judged by the results of both round One and Round Two testing. The testing determined that performance criteria are set at attainable levels, and the majority of in vivo monitoring facilities passed the criteria when complete results were submitted. 18 refs., 18 figs., 15 tabs.« less

Malaria diagnostic capacity in health facilities in Ethiopia

PubMed Central

2014-01-01

Background Accurate early diagnosis and prompt treatment is one of the key strategies to control and prevent malaria in Ethiopia where both Plasmodium falciparum and Plasmodium vivax are sympatric and require different treatment regimens. Microscopy is the standard for malaria diagnosis at the health centres and hospitals whereas rapid diagnostic tests are used at community-level health posts. The current study was designed to assess malaria microscopy capacity of health facilities in Oromia Regional State and Dire Dawa Administrative City, Ethiopia. Methods A descriptive cross-sectional study was conducted from February to April 2011 in 122 health facilities, where health professionals were interviewed using a pre-tested, standardized assessment tool and facilities’ laboratory practices were assessed by direct observation. Results Of the 122 assessed facilities, 104 (85%) were health centres and 18 (15%) were hospitals. Out of 94 health facilities reportedly performing blood films, only 34 (36%) used both thin and thick smears for malaria diagnosis. The quality of stained slides was graded in 66 health facilities as excellent, good and poor quality in 11(17%), 31 (47%) and 24 (36%) respectively. Quality assurance guidelines and malaria microscopy standard operating procedures were found in only 13 (11%) facilities and 12 (10%) had involved in external quality assessment activities, and 32 (26%) had supportive supervision within six months of the survey. Only seven (6%) facilities reported at least one staff’s participation in malaria microscopy refresher training during the previous 12 months. Although most facilities, 96 (79%), had binocular microscopes, only eight (7%) had the necessary reagents and supplies to perform malaria microscopy. Treatment guidelines for malaria were available in only 38 (31%) of the surveyed facilities. Febrile patients with negative malaria laboratory test results were managed with artemether-lumefantrine or chloroquine in 51% (53/104) of assessed health facilities. Conclusions The current study indicated that most of the health facilities had basic infrastructure and equipment to perform malaria laboratory diagnosis but with significant gaps in continuous laboratory supplies and reagents, and lack of training and supportive supervision. Overcoming these gaps will be critical to ensure that malaria laboratory diagnosis is of high-quality for better patient management. PMID:25073561

40 CFR 60.120 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of...: Pot furnaces of more than 250 kg (550 lb) charging capacity, blast (cupola) furnaces, and...

40 CFR 60.120 - Applicability and designation of affected facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of...: Pot furnaces of more than 250 kg (550 lb) charging capacity, blast (cupola) furnaces, and...

40 CFR 63.743 - Standards: General.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Emission Standards for Aerospace Manufacturing and Rework Facilities § 63.743 Standards: General. (a... of the device or equipment, test data verifying the performance of the device or equipment in... chemical milling maskants, as determined in accordance with the applicable procedures set forth in § 63.750...

40 CFR 63.743 - Standards: General.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Emission Standards for Aerospace Manufacturing and Rework Facilities § 63.743 Standards: General. (a... of the device or equipment, test data verifying the performance of the device or equipment in... chemical milling maskants, as determined in accordance with the applicable procedures set forth in § 63.750...

40 CFR 63.743 - Standards: General.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Emission Standards for Aerospace Manufacturing and Rework Facilities § 63.743 Standards: General. (a... of the device or equipment, test data verifying the performance of the device or equipment in... chemical milling maskants, as determined in accordance with the applicable procedures set forth in § 63.750...

40 CFR 63.743 - Standards: General.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Emission Standards for Aerospace Manufacturing and Rework Facilities § 63.743 Standards: General. (a... of the device or equipment, test data verifying the performance of the device or equipment in... chemical milling maskants, as determined in accordance with the applicable procedures set forth in § 63.750...

40 CFR 63.743 - Standards: General.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Emission Standards for Aerospace Manufacturing and Rework Facilities § 63.743 Standards: General. (a... of the device or equipment, test data verifying the performance of the device or equipment in... chemical milling maskants, as determined in accordance with the applicable procedures set forth in § 63.750...

10th European Zebrafish Meeting 2017, Budapest: Husbandry Workshop Summary.

PubMed

Oltová, Jana; Barton, Carrie; Certal, Ana Catarina; Argenton, Francesco; Varga, Zoltán M

2018-01-02

A husbandry workshop on July 3, 2017, at the 10th European Zebrafish Meeting in Budapest, Hungary (July 3-July 7, 2017), focused on the standardization, optimization, and streamlining of fish facility procedures. Standardization can be achieved for example by developing novel software and hardware tools, such as a fish facility database for husbandry and environmental facility management (Zebrabase, Oltova), or a hand-held, air-pressurized fish feeder for consistent food distribution (Blowfish, Argenton). Streamlining is achieved when work hours are reduced, as with the standardized fish feeder, or by limiting the number and types of fish diets and observing the effect on animal welfare and performance (Barton). Testing the characteristics of new fish diets and observing whether they produce better experimental outcomes (Certal) optimizes diets and improves fish productivity. Collectively, the workshop presentations emphasized how consistency and harmonization of husbandry procedures within and across aquatic facilities yield reproducible scientific outcomes.

42 CFR 494.110 - Condition: Quality assessment and performance improvement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... time. (c) Standard: Prioritizing improvement activities. The dialysis facility must set priorities for performance improvement, considering prevalence and severity of identified problems and giving priority to...

24 CFR 242.44 - Construction standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Construction standards. 242.44... MORTGAGE INSURANCE FOR HOSPITALS Construction § 242.44 Construction standards. Work designed and performed... “Guidelines for Construction and Equipment of Hospital and Medical Facilities,” which is regularly updated and...

24 CFR 242.44 - Construction standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Construction standards. 242.44... MORTGAGE INSURANCE FOR HOSPITALS Construction § 242.44 Construction standards. Work designed and performed... “Guidelines for Construction and Equipment of Hospital and Medical Facilities,” which is regularly updated and...

24 CFR 242.44 - Construction standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Construction standards. 242.44... MORTGAGE INSURANCE FOR HOSPITALS Construction § 242.44 Construction standards. Work designed and performed... “Guidelines for Construction and Equipment of Hospital and Medical Facilities,” which is regularly updated and...

Universal definition of loss to follow-up in HIV treatment programs: a statistical analysis of 111 facilities in Africa, Asia, and Latin America.

PubMed

Chi, Benjamin H; Yiannoutsos, Constantin T; Westfall, Andrew O; Newman, Jamie E; Zhou, Jialun; Cesar, Carina; Brinkhof, Martin W G; Mwango, Albert; Balestre, Eric; Carriquiry, Gabriela; Sirisanthana, Thira; Mukumbi, Henri; Martin, Jeffrey N; Grimsrud, Anna; Bacon, Melanie; Thiebaut, Rodolphe

2011-10-01

Although patient attrition is recognized as a threat to the long-term success of antiretroviral therapy programs worldwide, there is no universal definition for classifying patients as lost to follow-up (LTFU). We analyzed data from health facilities across Africa, Asia, and Latin America to empirically determine a standard LTFU definition. At a set "status classification" date, patients were categorized as either "active" or "LTFU" according to different intervals from time of last clinic encounter. For each threshold, we looked forward 365 d to assess the performance and accuracy of this initial classification. The best-performing definition for LTFU had the lowest proportion of patients misclassified as active or LTFU. Observational data from 111 health facilities-representing 180,718 patients from 19 countries-were included in this study. In the primary analysis, for which data from all facilities were pooled, an interval of 180 d (95% confidence interval [CI]: 173-181 d) since last patient encounter resulted in the fewest misclassifications (7.7%, 95% CI: 7.6%-7.8%). A secondary analysis that gave equal weight to cohorts and to regions generated a similar result (175 d); however, an alternate approach that used inverse weighting for cohorts based on variance and equal weighting for regions produced a slightly lower summary measure (150 d). When examined at the facility level, the best-performing definition varied from 58 to 383 d (mean=150 d), but when a standard definition of 180 d was applied to each facility, only slight increases in misclassification (mean=1.2%, 95% CI: 1.0%-1.5%) were observed. Using this definition, the proportion of patients classified as LTFU by facility ranged from 3.1% to 45.1% (mean=19.9%, 95% CI: 19.1%-21.7%). Based on this evaluation, we recommend the adoption of ≥180 d since the last clinic visit as a standard LTFU definition. Such standardization is an important step to understanding the reasons that underlie patient attrition and establishing more reliable and comparable program evaluation worldwide. Please see later in the article for the Editors' Summary.

40 CFR 430.105 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides: Subpart J [NSPS for secondary fiber non-deink facilities where paperboard from wastepaper is...

The SHIP facility at CERN

NASA Astrophysics Data System (ADS)

De Lellis, Giovanni

2016-04-01

Searches for new physics with accelerators are being performed at the LHC, looking for high massive particles coupled to matter with ordinary strength. A new experimental facility meant to search for very weakly coupled particles in the few GeV mass domain has been recently proposed. The existence of such particles, foreseen in different theoretical models beyond the Standard Model, is largely unexplored from the experimental point of view. A beam dump facility, built at CERN in the north area, using 400 GeV protons is a copious factory of charmed hadrons and could be used to probe the existence of such particles. The beam dump is also an ideal source of tau neutrinos, the less known particle in the Standard Model. In particular, tau anti-neutrinos have not been directly observed so far. We report the physics potential of such an experiment and outline the performances of a detector operating at the same facility for the search for the τ → μμμ decay.

Lighting Efficiency Changes On Horizon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richman, Eric E.; Rosenberg, Michael I.

2017-04-03

This article answers four questions posed by Facility Executive Magazine regarding the new 2016 edition of ASHRAE Standard 90.1. The discussion centers on new lighting power limits, lighting controls, and the new simulation based performance path in the standard.

The Development of a Quality Management Framework for Evaluating Medical Device Reprocessing Practice in Healthcare Facilities.

PubMed

Lorv, Bailey; Horodyski, Robin; Welton, Cynthia; Vail, John; Simonetto, Luca; Jokanovic, Danilo; Sharma, Richa; Mahoney, Angela Rea; Savoy-Bird, Shay; Bains, Shalu

2017-01-01

There is increasing awareness of the importance of medical device reprocessing (MDR) for the provision of safe patient care. Although industry service standards are available to guide MDR practices, there remains a lack of published key performance indicators (KPIs) and targets that are necessary to evaluate MDR quality for feedback and improvement. This article outlines the development of an initial framework that builds on established guidelines and includes service standards, KPIs and targets for evaluating MDR operations. This framework can support healthcare facilities in strengthening existing practices and enables a platform for collaboration towards better MDR performance management.

40 CFR 430.95 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides: Subpart I [Facilities where fine paper is produced] [NSPS] Pollutant or pollutant property Kg/kkg...

40 CFR 264.16 - Personnel training.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Personnel training. 264.16 Section 264... Facility Standards § 264.16 Personnel training. (a)(1) Facility personnel must successfully complete a program of classroom instruction or on-the-job training that teaches them to perform their duties in a way...

40 CFR 264.16 - Personnel training.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Personnel training. 264.16 Section 264... Facility Standards § 264.16 Personnel training. (a)(1) Facility personnel must successfully complete a program of classroom instruction or on-the-job training that teaches them to perform their duties in a way...

20 CFR 1001.121 - Performance standard on facilities and support for Veterans' Employment and Training Service...

Code of Federal Regulations, 2010 CFR

2010-04-01

... support for Veterans' Employment and Training Service (VETS) staff. 1001.121 Section 1001.121 Employees' Benefits OFFICE OF THE ASSISTANT SECRETARY FOR VETERANS' EMPLOYMENT AND TRAINING SERVICE, DEPARTMENT OF... Training Service (VETS) staff. Each State agency shall provide adequate and appropriate facilities and...

40 CFR 60.750 - Applicability, designation of affected facility, and delegation of authority.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Standards of Performance for Municipal Solid Waste Landfills § 60.750 Applicability, designation of affected facility, and delegation of authority. (a) The provisions of this subpart apply to each municipal solid waste landfill that commenced construction, reconstruction or modification on or after May 30, 1991...

40 CFR 60.750 - Applicability, designation of affected facility, and delegation of authority.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Standards of Performance for Municipal Solid Waste Landfills § 60.750 Applicability, designation of affected facility, and delegation of authority. (a) The provisions of this subpart apply to each municipal solid waste landfill that commenced construction, reconstruction or modification on or after May 30, 1991...

7 CFR 3401.3 - Eligibility requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... standards as they relate to a particular project: (1) Have adequate financial resources for performance, the necessary experience, organizational and technical qualifications, and facilities, or a firm commitment..., judgment, and performance, including, in particular, any prior performance under grants and contracts from...

40 CFR 264.111 - Closure performance standard.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Section 264.111 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES... eliminates, to the extent necessary to protect human health and the environment, post-closure escape of...

40 CFR 264.111 - Closure performance standard.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Section 264.111 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES... eliminates, to the extent necessary to protect human health and the environment, post-closure escape of...

7 CFR 353.9 - Standards for accreditation of non-government facilities to perform laboratory seed health...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Standards for accreditation of non-government... 353.9 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORT CERTIFICATION § 353.9 Standards for accreditation of non...

40 CFR 60.52 - Standard for particulate matter.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for particulate matter. 60.52... § 60.52 Standard for particulate matter. (a) On and after the date on which the initial performance... atmosphere from any affected facility any gases which contain particulate matter in excess of 0.18 g/dscm (0...

40 CFR 60.52 - Standard for particulate matter.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for particulate matter. 60.52... § 60.52 Standard for particulate matter. (a) On and after the date on which the initial performance... atmosphere from any affected facility any gases which contain particulate matter in excess of 0.18 g/dscm (0...

40 CFR 60.52 - Standard for particulate matter.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standard for particulate matter. 60.52... § 60.52 Standard for particulate matter. (a) On and after the date on which the initial performance... atmosphere from any affected facility any gases which contain particulate matter in excess of 0.18 g/dscm (0...

40 CFR 60.52 - Standard for particulate matter.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standard for particulate matter. 60.52... § 60.52 Standard for particulate matter. (a) On and after the date on which the initial performance... atmosphere from any affected facility any gases which contain particulate matter in excess of 0.18 g/dscm (0...

40 CFR 60.52 - Standard for particulate matter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for particulate matter. 60.52... § 60.52 Standard for particulate matter. (a) On and after the date on which the initial performance... atmosphere from any affected facility any gases which contain particulate matter in excess of 0.18 g/dscm (0...

40 CFR 60.52b - Standards for municipal waste combustor metals, acid gases, organics, and nitrogen oxides.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SOURCES Standards of Performance for Large Municipal Waste Combustors for Which Construction is Commenced... section. (i) For affected facilities that commenced construction, modification, or reconstruction after September 20, 1994, and on or before December 19, 2005, the emission limit is 24 milligrams per dry standard...

Frontline staff motivation levels and health care quality in rural and urban primary health facilities: a baseline study in the Greater Accra and Western regions of Ghana.

PubMed

Alhassan, Robert Kaba; Nketiah-Amponsah, Edward

2016-12-01

The population of Ghana is increasingly becoming urbanized with about 70 % of the estimated 26.9 million people living in urban and peri-urban areas. Nonetheless, eight out of the ten regions in Ghana remain predominantly rural where only 32.1 % of the national health sector workforce works. Doctor-patient ratio in a predominantly rural region is about 1:18,257 compared to 1:4,099 in an urban region. These rural-urban inequities significantly account for the inability of Ghana to attain the health related Millennium Development Goals (MDGs) before the end of 2015. To ascertain whether or not rural-urban differences exist in health worker motivation levels and quality of health care in health facilities accredited by the National Health Insurance Authority in Ghana. This is a baseline quantitative study conducted in 2012 among 324 health workers in 64 accredited clinics located in 9 rural and 7 urban districts in Ghana. Ordered logistic regression was performed to determine the relationship between facility geographic location (rural/urban) and staff motivation levels, and quality health care standards. Quality health care and patient safety standards were averagely low in the sampled health facilities. Even though health workers in rural facilities were more de-motivated by poor availability of resources and drugs than their counterparts in urban facilities (p < 0.05), quality of health care and patient safety standards were relatively better in rural facilities. For Ghana to attain the newly formulated sustainable development goals on health, there is the need for health authorities to address the existing rural-urban imbalances in health worker motivation and quality health care standards in primary healthcare facilities. Future studies should compare staff motivation levels and quality standards in accredited and non-accredited health facilities since the current study was limited to health facilities accredited by the National Health Insurance Authority.

Monitoring maternal and newborn health outcomes in Bauchi State, Nigeria: an evaluation of a standards-based quality improvement intervention.

PubMed

Kabo, Ibrahim; Otolorin, Emmanuel; Williams, Emma; Orobaton, Nosa; Abdullahi, Hannatu; Sadauki, Habib; Abdulkarim, Masduk; Abegunde, Dele

2016-10-01

This study assessed the correlation between compliance with set performance standards and maternal and neonatal deaths in health facilities. Baseline and three annual follow-up assessments were conducted, and each was followed by a quality improvement initiative using the Standards Based Management and Recognition (SBM-R) approach. Twenty-three secondary health facilities of Bauchi state, Nigeria. Health care workers and maternity unit patients. We examined trends in: (i) achievement of SBM-R set performance standards based on annual assessment data, (ii) the use of maternal and newborn health (MNH) service delivery practices based on data from health facility registers and supportive supervision and (iii) MNH outcomes based on routine service statistics. At the baseline assessment in 2010, the facilities achieved 4% of SBM-R standards for MNH, on average, and this increased to 86% in 2013. Over the same time period, the study measured an increase in the administration of uterotonic for active management of third stage of labor from 10% to 95% and a decline in the incidence of postpartum hemorrhage from 3.3% to 1.9%. Institutional neonatal mortality rate decreased from 9 to 2 deaths per 1000 live births, while the institutional maternal mortality ratio dropped from 4113 to 1317 deaths per 100 000 live births. Scaling up SBM-R for quality improvement has the potential to prevent maternal and neonatal deaths in Nigeria and similar settings. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care.

Medical Services Career Ladder (AFSC 902XO/A/B)

DTIC Science & Technology

1992-02-01

the manner specified by the AFR 39-1 Specialty Description and may serve as a basis for considering changes to current utilization policies and...medical facility policies 59 F285 Apply tape or nonelastic bandages 59 E147 Answer patient telephone inquiries 58 H441 Maintain treatment room supplies 57...medical facility policies 55 A14 Establish performance standards for subordinates 55 B58 Initiate actions to correct substandard performance of

Comparison of x ray computed tomography number to proton relative linear stopping power conversion functions using a standard phantom.

PubMed

Moyers, M F

2014-06-01

Adequate evaluation of the results from multi-institutional trials involving light ion beam treatments requires consideration of the planning margins applied to both targets and organs at risk. A major uncertainty that affects the size of these margins is the conversion of x ray computed tomography numbers (XCTNs) to relative linear stopping powers (RLSPs). Various facilities engaged in multi-institutional clinical trials involving proton beams have been applying significantly different margins in their patient planning. This study was performed to determine the variance in the conversion functions used at proton facilities in the U.S.A. wishing to participate in National Cancer Institute sponsored clinical trials. A simplified method of determining the conversion function was developed using a standard phantom containing only water and aluminum. The new method was based on the premise that all scanners have their XCTNs for air and water calibrated daily to constant values but that the XCTNs for high density/high atomic number materials are variable with different scanning conditions. The standard phantom was taken to 10 different proton facilities and scanned with the local protocols resulting in 14 derived conversion functions which were compared to the conversion functions used at the local facilities. For tissues within ±300 XCTN of water, all facility functions produced converted RLSP values within ±6% of the values produced by the standard function and within 8% of the values from any other facility's function. For XCTNs corresponding to lung tissue, converted RLSP values differed by as great as ±8% from the standard and up to 16% from the values of other facilities. For XCTNs corresponding to low-density immobilization foam, the maximum to minimum values differed by as much as 40%. The new method greatly simplifies determination of the conversion function, reduces ambiguity, and in the future could promote standardization between facilities. Although it was not possible from these experiments to determine which conversion function is most appropriate, the variation between facilities suggests that the margins used in some facilities to account for the uncertainty in converting XCTNs to RLSPs may be too small.

Recommended Practice for Pressure Measurements and Calculation of Effective Pumping Speeds During Electric Propulsion Testing

NASA Technical Reports Server (NTRS)

Dankanich, John W.; Walker, Mitchell; Swiatek, Michael W.; Yim, John T.

2013-01-01

The electric propulsion community has been implored to establish and implement a set of universally applicable test standards during the research, development, and qualification of electric propulsion systems. Variability between facility-to-facility and more importantly ground-to-flight performance can result in large margins in application or aversion to mission infusion. Performance measurements and life testing under appropriate conditions can be costly and lengthy. Measurement practices must be consistent, accurate, and repeatable. Additionally, the measurements must be universally transportable across facilities throughout the development, qualification, spacecraft integration, and on-orbit performance. A recommended practice for making pressure measurements, pressure diagnostics, and calculating effective pumping speeds with justification is presented.

40 CFR 432.75 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... achieve the standards for BOD5, fecal coliform, O&G, and TSS specified in § 432.72(a). (b) Facilities that..., fecal coliform, O&G, and TSS specified in § 432.72(b) and the limitations for ammonia (as N) and total...

40 CFR 432.95 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... standards for BOD 5, fecal coliform, O&G, and TSS specified in § 432.92(a). (b) Facilities that generate... coliform, O&G, and TSS specified in § 432.92(b) and the limitations for ammonia (as N) and total nitrogen...

40 CFR 418.15 - Standards of performance for new sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Phosphate Subcategory... calcium sulfate storage pile runoff facility operated separately or in combination with a water recirculation system designed, constructed and operated to maintain a surge capacity equal to the runoff from...

40 CFR 418.15 - Standards of performance for new sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Phosphate Subcategory... calcium sulfate storage pile runoff facility operated separately or in combination with a water recirculation system designed, constructed and operated to maintain a surge capacity equal to the runoff from...

40 CFR 418.15 - Standards of performance for new sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Phosphate Subcategory... calcium sulfate storage pile runoff facility operated separately or in combination with a water recirculation system designed, constructed and operated to maintain a surge capacity equal to the runoff from...

US DOE-EM On-Site Disposal Cell Working Group - Fostering Communication On Performance Assessment Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seitz, Roger R.; Suttora, Linda C.; Phifer, Mark

On-site disposal cells are in use and being considered at several U.S. Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These facilities are typically developed with regulatory oversight from States and/or the US Environmental Protection Agency (USEPA) in addition to USDOE. The facilities are developed to meet design standards for disposal of hazardous waste as well as the USDOE performance based standards for disposal of radioactive waste. The involvement of multiple and different regulators for facilities across separate sites has resulted in some differences in expectationsmore » for performance assessments and risk assessments (PA/RA) that are developed for the disposal facilities. The USDOE-EM Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnel associated with these Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to performance and risk assessments in support of a Record of Decision and Disposal Authorization Statement. The working group holds teleconferences, as needed, focusing on specific topics of interest. The topics addressed to date include an assessment of the assumptions used for performance assessments and risk assessments (PA/RAs) for on-site disposal cells, requirements and assumptions related to assessment of inadvertent intrusion, DOE Manual 435.1-1 requirements, and approaches for consideration of the long-term performance of liners and covers in the context of PAs. The working group has improved communication among the staff and oversight personnel responsible for onsite disposal cells and has provided a forum to identify and resolve common concerns.« less

40 CFR 60.5130 - What are the operator training and qualification requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emission Guidelines... operated unless a fully trained and qualified SSI unit operator is accessible, either at the facility or can be at the facility within 1 hour. The trained and qualified SSI unit operator may operate the SSI...

40 CFR 60.5130 - What are the operator training and qualification requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emission Guidelines... operated unless a fully trained and qualified SSI unit operator is accessible, either at the facility or can be at the facility within 1 hour. The trained and qualified SSI unit operator may operate the SSI...

40 CFR 125.87 - As an owner or operator of a new facility, must I perform monitoring?

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROTECTION AGENCY (CONTINUED) WATER PROGRAMS CRITERIA AND STANDARDS FOR THE NATIONAL POLLUTANT DISCHARGE ELIMINATION SYSTEM Requirements Applicable to Cooling Water Intake Structures for New Facilities Under Section... identified in either the Source Water Baseline Biological Characterization data required by 40 CFR 122.21(r...

42 CFR 488.318 - Inadequate survey performance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Inadequate survey performance. 488.318 Section 488... (CONTINUED) STANDARDS AND CERTIFICATION SURVEY, CERTIFICATION, AND ENFORCEMENT PROCEDURES Survey and Certification of Long-Term Care Facilities § 488.318 Inadequate survey performance. (a) CMS considers survey...

42 CFR 488.318 - Inadequate survey performance.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 5 2012-10-01 2012-10-01 false Inadequate survey performance. 488.318 Section 488... (CONTINUED) STANDARDS AND CERTIFICATION SURVEY, CERTIFICATION, AND ENFORCEMENT PROCEDURES Survey and Certification of Long-Term Care Facilities § 488.318 Inadequate survey performance. (a) CMS considers survey...

42 CFR 488.318 - Inadequate survey performance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 5 2013-10-01 2013-10-01 false Inadequate survey performance. 488.318 Section 488... (CONTINUED) STANDARDS AND CERTIFICATION SURVEY, CERTIFICATION, AND ENFORCEMENT PROCEDURES Survey and Certification of Long-Term Care Facilities § 488.318 Inadequate survey performance. (a) CMS considers survey...

42 CFR 488.318 - Inadequate survey performance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 5 2014-10-01 2014-10-01 false Inadequate survey performance. 488.318 Section 488... (CONTINUED) STANDARDS AND CERTIFICATION SURVEY, CERTIFICATION, AND ENFORCEMENT PROCEDURES Survey and Certification of Long-Term Care Facilities § 488.318 Inadequate survey performance. (a) CMS considers survey...

40 CFR 60.92 - Standard for particulate matter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for particulate matter. 60.92... Facilities § 60.92 Standard for particulate matter. (a) On and after the date on which the performance test... which: (1) Contain particulate matter in excess of 90 mg/dscm (0.04 gr/dscf). (2) Exhibit 20 percent...

40 CFR 60.92 - Standard for particulate matter.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for particulate matter. 60.92... Facilities § 60.92 Standard for particulate matter. (a) On and after the date on which the performance test... which: (1) Contain particulate matter in excess of 90 mg/dscm (0.04 gr/dscf). (2) Exhibit 20 percent...

40 CFR 60.92 - Standard for particulate matter.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standard for particulate matter. 60.92... Facilities § 60.92 Standard for particulate matter. (a) On and after the date on which the performance test... which: (1) Contain particulate matter in excess of 90 mg/dscm (0.04 gr/dscf). (2) Exhibit 20 percent...

40 CFR 60.92 - Standard for particulate matter.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for particulate matter. 60.92... Facilities § 60.92 Standard for particulate matter. (a) On and after the date on which the performance test... which: (1) Contain particulate matter in excess of 90 mg/dscm (0.04 gr/dscf). (2) Exhibit 20 percent...

40 CFR 60.92 - Standard for particulate matter.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standard for particulate matter. 60.92... Facilities § 60.92 Standard for particulate matter. (a) On and after the date on which the performance test... which: (1) Contain particulate matter in excess of 90 mg/dscm (0.04 gr/dscf). (2) Exhibit 20 percent...

SNL/CA Facilities Management Design Standards Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rabb, David; Clark, Eva

2014-12-01

At Sandia National Laboratories in California (SNL/CA), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/CA applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safetymore » and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule.« less

Accreditation of ambulatory facilities.

PubMed

Urman, Richard D; Philip, Beverly K

2014-06-01

With the continued growth of ambulatory surgical centers (ASC), the regulation of facilities has evolved to include new standards and requirements on both state and federal levels. Accreditation allows for the assessment of clinical practice, improves accountability, and better ensures quality of care. In some states, ASC may choose to voluntarily apply for accreditation from a recognized organization, but in others it is mandated. Accreditation provides external validation of safe practices, benchmarking performance against other accredited facilities, and demonstrates to patients and payers the facility's commitment to continuous quality improvement. Copyright © 2014 Elsevier Inc. All rights reserved.

Using a quality improvement model to enhance providers' performance in maternal and newborn health care: a post-only intervention and comparison design.

PubMed

Ayalew, Firew; Eyassu, Gizachew; Seyoum, Negash; van Roosmalen, Jos; Bazant, Eva; Kim, Young Mi; Tekleberhan, Alemnesh; Gibson, Hannah; Daniel, Ephrem; Stekelenburg, Jelle

2017-04-12

The Standards Based Management and Recognition (SBM-R © ) approach to quality improvement has been implemented in Ethiopia to strengthen routine maternal and newborn health (MNH) services. This evaluation assessed the effect of the intervention on MNH providers' performance of routine antenatal care (ANC), uncomplicated labor and delivery and immediate postnatal care (PNC) services. A post-only evaluation design was conducted at three hospitals and eight health centers implementing SBM-R and the same number of comparison health facilities. Structured checklists were used to observe MNH providers' performance on ANC (236 provider-client interactions), uncomplicated labor and delivery (226 provider-client interactions), and immediate PNC services in the six hours after delivery (232 provider-client interactions); observations were divided equally between intervention and comparison groups. Main outcomes were provider performance scores, calculated as the percentage of essential tasks in each service area completed by providers. Multilevel analysis was used to calculate adjusted mean percentage performance scores and standard errors to compare intervention and comparison groups. There was no statistically significant difference between intervention and comparison facilities in overall mean performance scores for ANC services (63.4% at intervention facilities versus 61.0% at comparison facilities, p = 0.650) or in any specific ANC skill area. MNH providers' overall mean performance score for uncomplicated labor and delivery care was 11.9 percentage points higher in the intervention than in the comparison group (77.5% versus 65.6%; p = 0.002). Overall mean performance scores for immediate PNC were 22.2 percentage points higher at intervention than at comparison facilities (72.8% versus 50.6%; p = 0.001); and there was a significant difference of 22 percentage points between intervention and comparison facilities for each PNC skill area: care for the newborn and health check for the mother. The SBM-R quality improvement intervention made a significant positive impact on MNH providers' performance during labor and delivery and immediate PNC services, but not during ANC services. Scaling up the intervention to other facilities and regions may increase the availability of good quality MNH services across Ethiopia. The findings will also guide implementation of the government's five-year (2015-2020) health sector transformation plan and health care quality strategies needed to meet the country's MNH goals.

Auditing radiation sterilization facilities

NASA Astrophysics Data System (ADS)

Beck, Jeffrey A.

The diversity of radiation sterilization systems available today places renewed emphasis on the need for thorough Quality Assurance audits of these facilities. Evaluating compliance with Good Manufacturing Practices is an obvious requirement, but an effective audit must also evaluate installation and performance qualification programs (validation_, and process control and monitoring procedures in detail. The present paper describes general standards that radiation sterilization operations should meet in each of these key areas, and provides basic guidance for conducting QA audits of these facilities.

Emergency obstetric and neonatal care availability, use, and quality: a cross-sectional study in the city of Lubumbashi, Democratic Republic of the Congo, 2011.

PubMed

Ntambue, Abel Mukengeshayi; Malonga, Françoise Kaj; Cowgill, Karen D; Dramaix-Wilmet, Michèle; Donnen, Philippe

2017-01-19

While emergency obstetric and neonatal care (EmONC) is a proxy indicator for monitoring maternal and perinatal mortalities, in Democratic Republic of the Congo (DRC), data on this care is rarely available. In the city of Lubumbashi, the second largest in DRC with an estimated population of 1.5 million, the availability, use and quality of EmONC are not known. This study aimed to assess these elements in Lubumbashi. This cross-sectional survey was conducted in April and May 2011. Fifty-three of the 180 health facilities that provide maternity care in Lubumbashi were included in this study. Only health facilities with at least six deliveries per month over the course of 2010 were included. The availability, use and quality of EmONC at each level of the health care system were assessed according to the WHO standards. The availability of EmONC in Lubumbashi falls short of WHO standards. In this study, we found one facility providing Comprehensive EmONC (CEmONC) for a catchment area of 918,819 inhabitants. Apart from the tertiary hospital (Sendwe), no other facility provided all the basic emergency obstetric and neonatal care (BEmONC) signal functions. However, all had carried out at least one of the nine signal functions during the 3 months preceding our survey: 73.6% of 53 facilities had administered parenteral antibiotics, 79.2% had systematically offered oxytocics, 39.6% had administered magnesium sulfate, 73.6% had manually evacuated placentas, 81.1% had removed retained placenta products, 54.7% had revived newborns, 35.8% had performed caesarean sections, and 47.2% had performed blood transfusions. Function 6, vaginal delivery assisted by ventouse or forceps, was performed in only two (3.8%) facilities. If this signal function was not taken into account in our assessment of EmONC availability, there would be five facilities providing CEmONC for 918,819 inhabitants, rather than one. In 2010, all the women in the surveyed facilities with obstetric complications delivered in facilities that had carried out at least one signal function in the 3 months before our survey; 7.0% of these women delivered in the facility which provided CEmONC. Mortality due to direct obstetric causes was 3.9% in the health facility that provided CEmONC. The intrapartum mortality was also high in this facility (5.1%). None of the maternity ward managers in any of the facilities surveyed had received training on the EmONC package. Essential supplies and equipment for performing certain EmONC functions were not available in all the surveyed facilities. Audits of maternal and neonatal deaths and near-misses should be established and used as a basis for monitoring the quality of care in Lubumbashi. To reduce maternal and perinatal mortality, it is essential that staff skills regarding EmONC be strengthened, the availability of supplies and equipment be increased, and that care processes be standardized in all health facilities in Lubumbashi.

Assessing healthcare quality using routine data: evaluating the performance of the national tuberculosis programme in South Africa.

PubMed

McLaren, Zoë M; Sharp, Alana R; Zhou, Jifang; Wasserman, Sean; Nanoo, Ananta

2017-02-01

To assess the performance of healthcare facilities by means of indicators based on guidelines for clinical care of TB, which is likely a good measure of overall facility quality. We assessed quality of care in all public health facilities in South Africa using graphical, correlation and locally weighted kernel regression analysis of routine TB test data. Facility performance falls short of national standards of care. Only 74% of patients with TB provided a second specimen for testing, 18% received follow-up testing and 14% received drug resistance testing. Only resistance testing rates improved over time, tripling between 2004 and 2011. National awareness campaigns and changes in clinical guidelines had only a transient impact on testing rates. The poorest performing facilities remained at the bottom of the rankings over the period of study. The optimal policy strategy requires both broad-based policies and targeted resources to poor performers. This approach to assessing facility quality of care can be adapted to other contexts and also provides a low-cost method for evaluating the effectiveness of proposed interventions. Devising targeted policies based on routine data is a cost-effective way to improve the quality of public health care provided. © 2016 John Wiley & Sons Ltd.

Standard on microbiological management of fluids for hemodialysis and related therapies by the Japanese Society for Dialysis Therapy 2008.

PubMed

Kawanishi, Hideki; Akiba, Takashi; Masakane, Ikuto; Tomo, Tadashi; Mineshima, Michio; Kawasaki, Tadayuki; Hirakata, Hideki; Akizawa, Tadao

2009-04-01

The Committee of Scientific Academy of the Japanese Society for Dialysis Therapy (JSDT) proposes a new standard on microbiological management of fluids for hemodialysis and related therapies. This standard is within the scope of the International Organization for Standardization (ISO), which is currently under revision. This standard is to be applied to the central dialysis fluid delivery systems (CDDS), which are widely used in Japan. In this standard, microbiological qualities for dialysis water and dialysis fluids are clearly defined by endotoxin level and bacterial count. The qualities of dialysis fluids were classified into three levels: standard, ultrapure, and online prepared substitution fluid. In addition, the therapeutic application of each dialysis fluid is clarified. Since high-performance dialyzers are frequently used in Japan, the standard recommends that ultrapure dialysis fluid be used for all dialysis modalities at all dialysis facilities. It also recommends that the dialysis equipment safety management committee at each facility should validate the microbiological qualities of online prepared substitution fluid.

30 CFR 824.11 - Mountaintop removal: Performance standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... highwalls remaining; (3) An industrial, commercial, agricultural, residential, or public facility (including... engineering data substantiates, and the regulatory authority finds, in writing, and includes in the permit...

30 CFR 824.11 - Mountaintop removal: Performance standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... highwalls remaining; (3) An industrial, commercial, agricultural, residential, or public facility (including... engineering data substantiates, and the regulatory authority finds, in writing, and includes in the permit...

30 CFR 824.11 - Mountaintop removal: Performance standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... highwalls remaining; (3) An industrial, commercial, agricultural, residential, or public facility (including... engineering data substantiates, and the regulatory authority finds, in writing, and includes in the permit...

30 CFR 824.11 - Mountaintop removal: Performance standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... highwalls remaining; (3) An industrial, commercial, agricultural, residential, or public facility (including... engineering data substantiates, and the regulatory authority finds, in writing, and includes in the permit...

30 CFR 824.11 - Mountaintop removal: Performance standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... highwalls remaining; (3) An industrial, commercial, agricultural, residential, or public facility (including... engineering data substantiates, and the regulatory authority finds, in writing, and includes in the permit...

Implementing the FDA performance standard on electrode lead wires and patient cables in hospitals.

PubMed

Tsitlik, J E; Rose, D C; Baumann, R C

2000-01-01

The U.S. Food and Drug Administration (FDA) Performance Standard on Electrode Lead Wires and Patient Cables became mandatory for all relevant devices on May 9, 2000. The standard requires that any lead wire or patient cable that has contact, temporary or permanent, with a patient, should not allow the connection of the patient to the earth or possibly hazardous voltages. This article advises those hospitals and other healthcare facilities that have not completed the upgrades of wires and cables on how to complete this task.

Medicare Program; Prospective Payment System and Consolidated Billing for Skilled Nursing Facilities for FY 2017, SNF Value-Based Purchasing Program, SNF Quality Reporting Program, and SNF Payment Models Research. Final rule.

PubMed

2016-08-05

This final rule updates the payment rates used under the prospective payment system (PPS) for skilled nursing facilities (SNFs) for fiscal year (FY) 2017. In addition, it specifies a potentially preventable readmission measure for the Skilled Nursing Facility Value-Based Purchasing Program (SNF VBP), and implements requirements for that program, including performance standards, a scoring methodology, and a review and correction process for performance information to be made public, aimed at implementing value-based purchasing for SNFs. Additionally, this final rule includes additional polices and measures in the Skilled Nursing Facility Quality Reporting Program (SNF QRP). This final rule also responds to comments on the SNF Payment Models Research (PMR) project.

Standard guide for developing a cost-effective risk mitigation plan for new and existing constructed facilities

Treesearch

Jeffrey Prestemon

2011-01-01

Protecting constructed facilities from damages from natural and man-made hazards in a costeffective manner is a challenging task. Several measures of economic performance are available for evaluating building-related investments. These measures include, but are not limited to, life-cycle cost, present value net savings, savings-to-investment ratio, and adjusted...

Universal Definition of Loss to Follow-Up in HIV Treatment Programs: A Statistical Analysis of 111 Facilities in Africa, Asia, and Latin America

PubMed Central

Chi, Benjamin H.; Yiannoutsos, Constantin T.; Westfall, Andrew O.; Newman, Jamie E.; Zhou, Jialun; Cesar, Carina; Brinkhof, Martin W. G.; Mwango, Albert; Balestre, Eric; Carriquiry, Gabriela; Sirisanthana, Thira; Mukumbi, Henri; Martin, Jeffrey N.; Grimsrud, Anna; Bacon, Melanie; Thiebaut, Rodolphe

2011-01-01

Background Although patient attrition is recognized as a threat to the long-term success of antiretroviral therapy programs worldwide, there is no universal definition for classifying patients as lost to follow-up (LTFU). We analyzed data from health facilities across Africa, Asia, and Latin America to empirically determine a standard LTFU definition. Methods and Findings At a set “status classification” date, patients were categorized as either “active” or “LTFU” according to different intervals from time of last clinic encounter. For each threshold, we looked forward 365 d to assess the performance and accuracy of this initial classification. The best-performing definition for LTFU had the lowest proportion of patients misclassified as active or LTFU. Observational data from 111 health facilities—representing 180,718 patients from 19 countries—were included in this study. In the primary analysis, for which data from all facilities were pooled, an interval of 180 d (95% confidence interval [CI]: 173–181 d) since last patient encounter resulted in the fewest misclassifications (7.7%, 95% CI: 7.6%–7.8%). A secondary analysis that gave equal weight to cohorts and to regions generated a similar result (175 d); however, an alternate approach that used inverse weighting for cohorts based on variance and equal weighting for regions produced a slightly lower summary measure (150 d). When examined at the facility level, the best-performing definition varied from 58 to 383 d (mean = 150 d), but when a standard definition of 180 d was applied to each facility, only slight increases in misclassification (mean = 1.2%, 95% CI: 1.0%–1.5%) were observed. Using this definition, the proportion of patients classified as LTFU by facility ranged from 3.1% to 45.1% (mean = 19.9%, 95% CI: 19.1%–21.7%). Conclusions Based on this evaluation, we recommend the adoption of ≥180 d since the last clinic visit as a standard LTFU definition. Such standardization is an important step to understanding the reasons that underlie patient attrition and establishing more reliable and comparable program evaluation worldwide. Please see later in the article for the Editors' Summary PMID:22039357

42 CFR 488.320 - Sanctions for inadequate survey performance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Sanctions for inadequate survey performance. 488... HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION SURVEY, CERTIFICATION, AND ENFORCEMENT PROCEDURES Survey and Certification of Long-Term Care Facilities § 488.320 Sanctions for inadequate survey...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 63.363 - Compliance and performance provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Ethylene Oxide Emissions Standards for Sterilization Facilities § 63.363 Compliance and performance... operating limit either: (i) The maximum ethylene glycol concentration using the procedures described in § 63... initial compliance test, analyze ethylene oxide concentration data from § 63.364(e) or a continuous...

Preliminary hazards analysis -- vitrification process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coordes, D.; Ruggieri, M.; Russell, J.

1994-06-01

This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s constructionmore » and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.« less

Data development technical support document for the aircraft crash risk analysis methodology (ACRAM) standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimura, C.Y.; Glaser, R.E.; Mensing, R.W.

1996-08-01

The Aircraft Crash Risk Analysis Methodology (ACRAM) Panel has been formed by the US Department of Energy Office of Defense Programs (DOE/DP) for the purpose of developing a standard methodology for determining the risk from aircraft crashes onto DOE ground facilities. In order to accomplish this goal, the ACRAM panel has been divided into four teams, the data development team, the model evaluation team, the structural analysis team, and the consequence team. Each team, consisting of at least one member of the ACRAM plus additional DOE and DOE contractor personnel, specializes in the development of the methodology assigned to thatmore » team. This report documents the work performed by the data development team and provides the technical basis for the data used by the ACRAM Standard for determining the aircraft crash frequency. This report should be used to provide the generic data needed to calculate the aircraft crash frequency into the facility under consideration as part of the process for determining the aircraft crash risk to ground facilities as given by the DOE Standard Aircraft Crash Risk Assessment Methodology (ACRAM). Some broad guidance is presented on how to obtain the needed site-specific and facility specific data but this data is not provided by this document.« less

Enhancing compliance at Department of Defense facilities: comparison of three environmental audit tools.

PubMed

Hepler, Jeff A; Neumann, Cathy

2003-04-01

To enhance environmental compliance, the U.S. Department of Defense (DOD) recently developed and implemented a standardized environmental audit tool called The Environmental Assessment and Management (TEAM) Guide. Utilization of a common audit tool (TEAM Guide) throughout DOD agencies could be an effective agent of positive change. If, however, the audit tool is inappropriate, environmental compliance at DOD facilities could worsen. Furthermore, existing audit systems such as the U.S. Environmental Protection Agency's (U.S. EPA's) Generic Protocol for Conducting Environmental Audits of Federal Facilities and the International Organization for Standardization's (ISO's) Standard 14001, "Environmental Management System Audits," may be abandoned even if they offer significant advantages over TEAM Guide audit tool. Widespread use of TEAM Guide should not take place until thorough and independent evaluation has been performed. The purpose of this paper is to compare DOD's TEAM Guide audit tool with U.S. EPA's Generic Protocol for Conducting Environmental Audits of Federal Facilities and ISO 14001, in order to assess which is most appropriate and effective for DOD facilities, and in particular those operated by the U.S. Army Corps of Engineers (USACE). USACE was selected as a result of one author's recent experience as a district environmental compliance coordinator responsible for the audit mission at this agency. Specific recommendations for enhancing the quality of environmental audits at all DOD facilities also are given.

Reproductive health services in Malawi: an evaluation of a quality improvement intervention.

PubMed

Rawlins, Barbara J; Kim, Young-Mi; Rozario, Aleisha M; Bazant, Eva; Rashidi, Tambudzai; Bandazi, Sheila N; Kachale, Fannie; Sanghvi, Harshad; Noh, Jin Won

2013-01-01

this study was to evaluate the impact of a quality improvement initiative in Malawi on reproductive health service quality and related outcomes. (1) post-only quasi-experimental design comparing observed service quality at intervention and comparison health facilities, and (2) a time-series analysis of service statistics. sixteen of Malawi's 23 district hospitals, half of which had implemented the Performance and Quality Improvement (PQI) intervention for reproductive health at the time of the study. a total of 98 reproductive health-care providers (mostly nurse-midwives) and 139 patients seeking family planning (FP), antenatal care (ANC), labour and delivery (L&D), or postnatal care (PNC) services. health facility teams implemented a performance and quality improvement (PQI) intervention over a 3-year period. Following an external observational assessment of service quality at baseline, facility teams analysed performance gaps, designed and implemented interventions to address weaknesses, and conducted quarterly internal assessments to assess progress. Facilities qualified for national recognition by complying with at least 80% of reproductive health clinical standards during an external verification assessment. key measures include facility readiness to provide quality care, observed health-care provider adherence to clinical performance standards during service delivery, and trends in service utilisation. intervention facilities were more likely than comparison facilities to have the needed infrastructure, equipment, supplies, and systems in place to offer reproductive health services. Observed quality of care was significantly higher at intervention than comparison facilities for PNC and FP. Compared with other providers, those at intervention facilities scored significantly higher on client assessment and diagnosis in three service areas, on clinical management and procedures in two service areas, and on counselling in one service area. Service statistics suggest that the PQI intervention increased the number of Caesarean sections, but showed no impact on other indicators of service utilisation and skilled care. the PQI intervention showed a positive impact on the quality of reproductive health services. The effects of the intervention on service utilisation had likely not yet been fully realized, since none of the facilities had achieved national recognition before the evaluation. Staff turnover needs to be reduced to maximise the effectiveness of the intervention. the PQI intervention evaluated here offers an effective way to improve the quality of health services in low-resource settings and should continue to be scaled up in Malawi. Copyright © 2011 Elsevier Ltd. All rights reserved.

42 CFR 493.1101 - Standard: Facilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Facilities. 493.1101 Section 493.1101... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Facility Administration for Nonwaived Testing § 493.1101 Standard: Facilities. (a) The laboratory must be constructed, arranged, and maintained to...

Effects of State Minimum Staffing Standards on Nursing Home Staffing and Quality of Care

PubMed Central

Park, Jeongyoung; Stearns, Sally C

2009-01-01

Objective To investigate the impact of state minimum staffing standards on the level of staffing and quality of nursing home care. Data Sources Online Survey and Certification Reporting System (OSCAR) merged with the Area Resource File from 1998 through 2001. Study Design Between 1998 and 2001, 16 states implemented or expanded staffing standards in excess of federal requirements, creating a natural experiment in comparison with facilities in states without new standards. Difference-in-differences models using facility fixed effects were estimated to determine the effect of state standards. Data Collection/Extraction Methods OSCAR data were linked to the data on market conditions and state policies. A total of 55,248 facility-year observations from 15,217 freestanding facilities were analyzed. Principal Findings Increased standards resulted in small staffing increases for facilities with staffing initially below or close to new standards. Yet the standards were associated with reductions in restraint use and the number of total deficiencies at all types of facilities. Conclusions Mandated staffing standards affect only low-staff facilities facing potential for penalties, and effects are small. Selected facility-level outcomes may show improvement at all facilities due to a general response to increased standards or to other quality initiatives implemented at the same time as staffing standards. PMID:18823448

Cross-Media Electronic Reporting Rule

EPA Pesticide Factsheets

Cross-Media Electronic Reporting Regulation (CROMERR) sets performance-based, technology-neutral standards for systems that states, tribes, and local governments use to receive electronic reports from facilities they regulate under EPA-authorized programs.

Water Dashboard Help | ECHO | US EPA

EPA Pesticide Factsheets

The dashboards on the ECHO website are specialized to track both facility and agency performance as they relate to compliance with and enforcement of environmental standards under the Clean Water Act (CWA).

33 CFR 154.1110 - Purpose and applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Requirements for a Trans-Alaska Pipeline Authorization Act (TAPAA) Facility Operating in Prince William Sound... performance standards. (b) The information required by this subpart must be included in the Prince William...

A proton irradiation test facility for space research in Ankara, Turkey

NASA Astrophysics Data System (ADS)

Gencer, Ayşenur; Yiǧitoǧlu, Merve; Bilge Demirköz, Melahat; Efthymiopoulos, Ilias

2016-07-01

Space radiation often affects the electronic components' performance during the mission duration. In order to ensure reliable performance, the components must be tested to at least the expected dose that will be received in space, before the mission. Accelerator facilities are widely used for such irradiation tests around the world. Turkish Atomic Energy Authority (TAEA) has a 15MeV to 30MeV variable proton cyclotron in Ankara and the facility's main purpose is to produce radioisotopes in three different rooms for different target systems. There is also an R&D room which can be used for research purposes. This paper will detail the design and current state of the construction of a beamline to perform Single Event Effect (SEE) tests in Ankara for the first time. ESA ESCC No.25100 Standard Single Event Effect Test Method and Guidelines is being considered for these SEE tests. The proton beam kinetic energy must be between 20MeV and 200MeV according to the standard. While the proton energy is suitable for SEE tests, the beam size must be 15.40cm x 21.55cm and the flux must be between 10 ^{5} p/cm ^{2}/s to at least 10 ^{8} p/cm ^{2}/s according to the standard. The beam size at the entrance of the R&D room is mm-sized and the current is variable between 10μA and 1.2mA. Therefore, a defocusing beam line has been designed to enlarge the beam size and reduce the flux value. The beam line has quadrupole magnets to enlarge the beam size and the collimators and scattering foils are used for flux reduction. This facility will provide proton fluxes between 10 ^{7} p/cm ^{2}/s and 10 ^{10} p/cm ^{2}/s for the area defined in the standard when completed. Also for testing solar cells developed for space, the proton beam energy will be lowered below 10MeV. This project has been funded by Ministry of Development in Turkey and the beam line construction will finish in two years and SEE tests will be performed for the first time in Turkey.

Effect of poor control of film processors on mammographic image quality.

PubMed

Kimme-Smith, C; Sun, H; Bassett, L W; Gold, R H

1992-11-01

With the increasingly stringent standards of image quality in mammography, film processor quality control is especially important. Current methods are not sufficient for ensuring good processing. The authors used a sensitometer and densitometer system to evaluate the performance of 22 processors at 16 mammographic facilities. Standard sensitometric values of two films were established, and processor performance was assessed for variations from these standards. Developer chemistry of each processor was analyzed and correlated with its sensitometric values. Ten processors were retested, and nine were found to be out of calibration. The developer components of hydroquinone, sulfites, bromide, and alkalinity varied the most, and low concentrations of hydroquinone were associated with lower average gradients at two facilities. Use of the sensitometer and densitometer system helps identify out-of-calibration processors, but further study is needed to correlate sensitometric values with developer component values. The authors believe that present quality control would be improved if sensitometric or other tests could be used to identify developer components that are out of calibration.

Development of a standardized transfusion ratio as a metric for evaluating dialysis facility anemia management practices.

PubMed

Liu, Jiannong; Li, Suying; Gilbertson, David T; Monda, Keri L; Bradbury, Brian D; Collins, Allan J

2014-10-01

Because transfusion avoidance has been the cornerstone of anemia treatment for patients with kidney disease, direct measurement of red blood cell transfusion use to assess dialysis facility anemia management performance is reasonable. We aimed to explore methods for estimating facility-level standardized transfusion ratios (STfRs) to assess provider anemia treatment practices. Retrospective cohort study. Point prevalent US hemodialysis patients on January 1, 2009, with Medicare as primary payer and dialysis duration of 90 days or longer were included (n = 223,901). All dialysis facilities with eligible patients were included (n = 5,345). Dialysis facility assignment. Receiving a red blood cell transfusion in the inpatient or outpatient setting. We evaluated 3 approaches for estimating STfR: ratio of observed to expected numbers of transfusions (STfR(obs)), a Bayesian approach (STfR(Bayes)), and a modified version of the Bayesian approach (STfR(modBayes)). The overall national transfusion rate in 2009 was 23.2 per 100 patient-years. Our model for predicting the expected number of transfusions performed well. For large facilities, all 3 STfRs worked well. However, for small facilities, while the STfR(modBayes) worked well, STfR(obs) values demonstrated instability and the STfR(Bayes) may produce more bias. Administration of transfusions to dialysis patients reflects medical practice both within and outside the dialysis unit. Some transfusions may be deemed unavoidable and transfusion practices are subject to considerable regional variation. Development of an STfR metric is feasible and reasonable for assessing anemia treatment at dialysis facilities. The STfR(obs) is simple to calculate and works well for larger dialysis facilities. The STfR(modBayes) is more analytically complex, but facilitates comparisons across all dialysis facilities, including small facilities. Copyright © 2014 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Development of an Enhanced Payback Function for the Superior Energy Performance Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Therkelsen, Peter; Rao, Prakash; McKane, Aimee

2015-08-03

The U.S. DOE Superior Energy Performance (SEP) program provides recognition to industrial and commercial facilities that achieve certification to the ISO 50001 energy management system standard and third party verification of energy performance improvements. Over 50 industrial facilities are participating and 28 facilities have been certified in the SEP program. These facilities find value in the robust, data driven energy performance improvement result that the SEP program delivers. Previous analysis of SEP certified facility data demonstrated the cost effectiveness of SEP and identified internal staff time to be the largest cost component related to SEP implementation and certification. This papermore » analyzes previously reported and newly collected data of costs and benefits associated with the implementation of an ISO 50001 and SEP certification. By disaggregating “sunk energy management system (EnMS) labor costs”, this analysis results in a more accurate and detailed understanding of the costs and benefits of SEP participation. SEP is shown to significantly improve and sustain energy performance and energy cost savings, resulting in a highly attractive return on investment. To illustrate these results, a payback function has been developed and is presented. On average facilities with annual energy spend greater than $2M can expect to implement SEP with a payback of less than 1.5 years. Finally, this paper also observes and details decreasing facility costs associated with implementing ISO 50001 and certifying to the SEP program, as the program has improved from pilot, to demonstration, to full launch.« less

Development of a calibration equipment for spectrometer qualification

NASA Astrophysics Data System (ADS)

Michel, C.; Borguet, B.; Boueé, A.; Blain, P.; Deep, A.; Moreau, V.; François, M.; Maresi, L.; Myszkowiak, A.; Taccola, M.; Versluys, J.; Stockman, Y.

2017-09-01

With the development of new spectrometer concepts, it is required to adapt the calibration facilities to characterize correctly their performances. These spectro-imaging performances are mainly Modulation Transfer Function, spectral response, resolution and registration; polarization, straylight and radiometric calibration. The challenge of this calibration development is to achieve better performance than the item under test using mostly standard items. Because only the subsystem spectrometer needs to be calibrated, the calibration facility needs to simulate the geometrical "behaviours" of the imaging system. A trade-off study indicates that no commercial devices are able to fulfil completely all the requirements so that it was necessary to opt for an in home telecentric achromatic design. The proposed concept is based on an Offner design. This allows mainly to use simple spherical mirrors and to cover the spectral range. The spectral range is covered with a monochromator. Because of the large number of parameters to record the calibration facility is fully automatized. The performances of the calibration system have been verified by analysis and experimentally. Results achieved recently on a free-form grating Offner spectrometer demonstrate the capacities of this new calibration facility. In this paper, a full calibration facility is described, developed specifically for a new free-form spectro-imager.

Environmental assessment for the proposed effluent limitations guidelines, pretreatment standards, and new source performance standards for the centralized waste treatment industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

This report assesses the water quality related benefits that would be expected if the US Environmental Protection Agency (EPA) adopts the proposed effluent limitations, guidelines and pretreatment standards for the Centralized Waste Treatment (CWT) Industry. EPA estimates that under baseline conditions 205 CWT facilities discharge approximately 5.22 million lbs/year of metal and organic pollutants.

iss038e024791

NASA Image and Video Library

2014-01-02

ISS038-E-024791 (2 Jan. 2014) --- In the International Space Station's Kibo laboratory, NASA astronaut Rick Mastracchio, Expedition 38 flight engineer, performs troubleshooting on the Biorack centrifuge for NanoRacks, a facility that provides lower-cost microgravity research facilities for small payloads utilizing a standardized "plug-and-play" interface. Mastracchio checked the three settings of the centrifuge, which is designed to simulate the gravity of Earth, the moon and Mars.

Radiation shielding design of a new tomotherapy facility.

PubMed

Zacarias, Albert; Balog, John; Mills, Michael

2006-10-01

It is expected that intensity modulated radiation therapy (IMRT) and image guided radiation therapy (IGRT) will replace a large portion of radiation therapy treatments currently performed with conventional MLC-based 3D conformal techniques. IGRT may become the standard of treatment in the future for prostate and head and neck cancer. Many established facilities may convert existing vaults to perform this treatment method using new or upgraded equipment. In the future, more facilities undoubtedly will be considering de novo designs for their treatment vaults. A reevaluation of the design principles used in conventional vault design is of benefit to those considering this approach with a new tomotherapy facility. This is made more imperative as the design of the TomoTherapy system is unique in several aspects and does not fit well into the formalism of NCRP 49 for a conventional linear accelerator.

Virtual EPID standard phantom audit (VESPA) for remote IMRT and VMAT credentialing.

PubMed

Miri, Narges; Lehmann, Joerg; Legge, Kimberley; Vial, Philip; Greer, Peter B

2017-06-07

A virtual EPID standard phantom audit (VESPA) has been implemented for remote auditing in support of facility credentialing for clinical trials using IMRT and VMAT. VESPA is based on published methods and a clinically established IMRT QA procedure, here extended to multi-vendor equipment. Facilities are provided with comprehensive instructions and CT datasets to create treatment plans. They deliver the treatment directly to their EPID without any phantom or couch in the beam. In addition, they deliver a set of simple calibration fields per instructions. Collected EPID images are uploaded electronically. In the analysis, the dose is projected back into a virtual cylindrical phantom. 3D gamma analysis is performed. 2D dose planes and linear dose profiles are provided and can be considered when needed for clarification. In addition, using a virtual flat-phantom, 2D field-by-field or arc-by-arc gamma analyses are performed. Pilot facilities covering a range of planning and delivery systems have performed data acquisition and upload successfully. Advantages of VESPA are (1) fast turnaround mainly driven by the facility's capability of providing the requested EPID images, (2) the possibility for facilities performing the audit in parallel, as there is no need to wait for a phantom, (3) simple and efficient credentialing for international facilities, (4) a large set of data points, and (5) a reduced impact on resources and environment as there is no need to transport heavy phantoms or audit staff. Limitations of the current implementation of VESPA for trials credentialing are that it does not provide absolute dosimetry, therefore a Level I audit is still required, and that it relies on correctly delivered open calibration fields, which are used for system calibration. The implemented EPID based IMRT and VMAT audit system promises to dramatically improve credentialing efficiency for clinical trials and wider applications.

MO-D-213-08: Remote Dosimetric Credentialing for Clinical Trials with the Virtual EPID Standard Phantom Audit (VESPA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lehmann, J; University of Sydney, Sydney, NSW; Miri, N

Purpose: Report on implementation of a Virtual EPID Standard Phantom Audit (VESPA) for IMRT to support credentialing of facilities for clinical trials. Data is acquired by local facility staff and transferred electronically. Analysis is performed centrally. Methods: VESPA is based on published methods and a clinically established IMRT QA procedure, here extended to multi-vendor equipment. Facilities, provided with web-based comprehensive instructions and CT datasets, create IMRT treatment plans. They deliver the treatments directly to their EPID without phantom or couch in the beam. They also deliver a set of simple calibration fields. Collected EPID images are uploaded electronically. In themore » analysis, the dose is projected back into a virtual phantom and 3D gamma analysis is performed. 2D dose planes and linear dose profiles can be analysed when needed for clarification. Results: Pilot facilities covering a range of planning and delivery systems have performed data acquisition and upload successfully. Analysis showed agreement comparable to local experience with the method. Advantages of VESPA are (1) fast turnaround mainly driven by the facility’s capability to provide the requested EPID images, (2) the possibility for facilities performing the audit in parallel, as there is no need to wait for a phantom, (3) simple and efficient credentialing for international facilities, (4) a large set of data points, and (5) a reduced impact on resources and environment as there is no need to transport heavy phantoms or audit staff. Limitations of the current implementation of VESPA for trials credentialing are that it does not provide absolute dosimetry, therefore a Level 1 audit still required, and that it relies on correctly delivered open calibration fields, which are used for system calibration. Conclusion: The implemented EPID based IMRT audit system promises to dramatically improve credentialing efficiency for clinical trials and wider applications. VESPA for VMAT will follow soon.« less

ISO 15859 Propellant and Fluid Specifications: A Review and Comparison with Military and NASA Specifications

NASA Technical Reports Server (NTRS)

Greene, Ben; McClure, Mark B.; Baker, David L.

2006-01-01

This work presents an overview of the International Organization for Standardization (ISO) 15859 International Standard for Space Systems Fluid Characteristics, Sampling and Test Methods Parts 1 through 13 issued in June 2004. These standards establish requirements for fluid characteristics, sampling, and test methods for 13 fluids of concern to the propellant community and propellant characterization laboratories: oxygen, hydrogen, nitrogen, helium, nitrogen tetroxide, monomethylhydrazine, hydrazine, kerosene, argon, water, ammonia, carbon dioxide, and breathing air. A comparison of the fluid characteristics, sampling, and test methods required by the ISO standards to the current military and NASA specifications, which are in use at NASA facilities and elsewhere, is presented. Many ISO standards composition limits and other content agree with those found in the applicable parts of NASA SE-S-0073, NASA SSP 30573, military performance standards and details, and Compressed Gas Association (CGA) commodity specifications. The status of a current project managed at NASA Johnson Space Center White Sands Test Facility (WSTF) to rewrite these documents is discussed.

7 CFR 353.9 - Standards for accreditation of non-government facilities to perform laboratory seed health...

Code of Federal Regulations, 2013 CFR

2013-01-01

... seed requires a stereo microscope. Visual examination of tissue requires a compound light microscope... equipment; fluorescent microscopes; plate readers; spectrophotometers; and the appropriate assay materials...

7 CFR 353.9 - Standards for accreditation of non-government facilities to perform laboratory seed health...

Code of Federal Regulations, 2011 CFR

2011-01-01

... seed requires a stereo microscope. Visual examination of tissue requires a compound light microscope... equipment; fluorescent microscopes; plate readers; spectrophotometers; and the appropriate assay materials...

7 CFR 353.9 - Standards for accreditation of non-government facilities to perform laboratory seed health...

Code of Federal Regulations, 2010 CFR

2010-01-01

... seed requires a stereo microscope. Visual examination of tissue requires a compound light microscope... equipment; fluorescent microscopes; plate readers; spectrophotometers; and the appropriate assay materials...

7 CFR 353.9 - Standards for accreditation of non-government facilities to perform laboratory seed health...

Code of Federal Regulations, 2014 CFR

2014-01-01

... seed requires a stereo microscope. Visual examination of tissue requires a compound light microscope... equipment; fluorescent microscopes; plate readers; spectrophotometers; and the appropriate assay materials...

Implementing iRound: A Computer-Based Auditing Tool.

PubMed

Brady, Darcie

Many hospitals use rounding or auditing as a tool to help identify gaps and needs in quality and process performance. Some hospitals are also using rounding to help improve patient experience. It is known that purposeful rounding helps improve Hospital Consumer Assessment of Healthcare Providers and Systems scores by helping manage patient expectations, provide service recovery, and recognize quality caregivers. Rounding works when a standard method is used across the facility, where data are comparable and trustworthy. This facility had a pen-and-paper process in place that made data reporting difficult, created a silo culture between departments, and most audits and rounds were completed differently on each unit. It was recognized that this facility needed to standardize the rounding and auditing process. The tool created by the Advisory Board called iRound was chosen as the tool this facility would use for patient experience rounds as well as process and quality rounding. The success of the iRound tool in this facility depended on several factors that started many months before implementation to current everyday usage.

Hydrogen Infrastructure Testing and Research Facility | Hydrogen and Fuel

Science.gov Websites

stations, enabling NREL to validate current industry standards and methods for hydrogen fueling as well as the HITRF to: Develop, quantify performance of, and improve renewable hydrogen production methods

40 CFR 60.610 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... numerical emission limits in these standards are expressed in terms of total organic compounds (TOC), measured as TOC minus methane and ethane. This emission limit reflects the performance of BDT. [55 FR 26922...

Performance of buried pipe installation : tech summary.

DOT National Transportation Integrated Search

2010-05-01

Existing codes and recommendations often require standard/minimum values for the bedding, backfi ll, and fi ll cover geometric and : mechanical properties in the installation of buried pipes under transportation facilities. These recommended values a...

Phosphate Fertilizer Industry: New Source Performance Standards - 40 CFR 60 Subparts T, U, V, W & X

EPA Pesticide Factsheets

Learn about the the NSPS regulations for Diammonium phosphate plants, superphosphoric acid plants, granular triple superphosphate storage facilities, triple superphosphate plants & wet-process phosphoric acid plants

NEUTRON CHARACTERIZATION OF ENSA-DPT TYPE SPENT FUEL CASK AT TRILLO NUCLEAR POWER PLANT.

PubMed

Méndez-Villafañe, Roberto; Campo-Blanco, Xandra; Embid, Miguel; Yéboles, César A; Morales, Ramón; Novo, Manuel; Sanz, Javier

2018-04-23

The Neutron Standards Laboratory of CIEMAT has conducted the characterization of the independent spent fuel storage installation at the Trillo Nuclear Power Plant. At this facility, the spent fuel assemblies are stored in ENSA-DPT type dual purpose casks. Neutron characterization was performed by dosimetry measurements with a neutron survey meter (LB6411) inside the facility, around an individual cask and between stored casks, and outside the facility. Spectra measurements were also performed with a Bonner sphere system in order to determine the integral quantities and validate the use of the neutron monitor at the different positions. Inside the facility, measured neutron spectra and neutron ambient dose equivalent rate are consistent with the casks spatial distribution and neutron emission rates, and measurements with both instruments are consistent with each other. Outside the facility, measured neutron ambient dose equivalent rates are well below the 0.5 μSv/h limit established by the nuclear regulatory authority.

36 CFR 1234.20 - What rules apply if there is a conflict between NARA standards and other regulatory standards...

Code of Federal Regulations, 2010 CFR

2010-07-01

... a conflict between NARA standards and other regulatory standards that a facility must follow? 1234... Facility Standards § 1234.20 What rules apply if there is a conflict between NARA standards and other regulatory standards that a facility must follow? (a) If any provisions of this part conflict with local or...

Review and Application of ASME NOG-1 and ASME NUM-1-2000

NASA Technical Reports Server (NTRS)

Lytle, Bradford P.; Delgado, H. (Technical Monitor)

2002-01-01

The intent of the workshop is to review the application of the ASME Nuclear Crane Standards ASME NOG-1 and ASME NUM-1-2000. The ASME Nuclear Crane standards provide a basis for purchasing overhead handling equipment with enhanced safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities.

Differences in Colonoscopy Quality Among Facilities: Development of a Post-Colonoscopy Risk-Standardized Rate of Unplanned Hospital Visits.

PubMed

Ranasinghe, Isuru; Parzynski, Craig S; Searfoss, Rana; Montague, Julia; Lin, Zhenqiu; Allen, John; Vender, Ronald; Bhat, Kanchana; Ross, Joseph S; Bernheim, Susannah; Krumholz, Harlan M; Drye, Elizabeth E

2016-01-01

Colonoscopy is a common procedure, yet little is known about variations in colonoscopy quality among outpatient facilities. We developed an outcome measure to profile outpatient facilities by estimating risk-standardized rates of unplanned hospital visits within 7 days of colonoscopy. We used a 20% sample of 2010 Medicare outpatient colonoscopy claims (331,880 colonoscopies performed at 8140 facilities) from patients ≥65 years or older, and developed a patient-level logistic regression model to estimate the risk of unplanned hospital visits (ie, emergency department visits, observation stays, and inpatient admissions) within 7 days of colonoscopy. We then used the patient-level risk model variables and hierarchical logistic regression to estimate facility rates of risk-standardized unplanned hospital visits using data from the Healthcare Cost and Utilization Project (325,811 colonoscopies at 992 facilities), from 4 states containing 100% of colonoscopies per facility. Outpatient colonoscopies were followed by 5412 unplanned hospital visits within 7 days (16.3/1000 colonoscopies). Hemorrhage, abdominal pain, and perforation were the most common causes of unplanned hospital visits. Fifteen variables were independently associated with unplanned hospital visits (c = 0.67). A history of fluid and electrolyte imbalance (odds ratio [OR] = 1.43; 95% confidence interval [CI]: 1.29-1.58), psychiatric disorders (OR = 1.34; 95% CI: 1.22-1.46), and, in the absence of prior arrhythmia, increasing age past 65 years (aged >85 years vs 65-69 years: OR = 1.87; 95% CI: 1.54-2.28) were most strongly associated. The facility risk-standardized unplanned hospital visits calculated using Healthcare Cost and Utilization Project data showed significant variation (median 12.3/1000; 5th-95th percentile, 10.5-14.6/1000). Median risk-standardized unplanned hospital visits were comparable between ambulatory surgery centers and hospital outpatient departments (each was 10.2/1000), and ranged from 16.1/1000 in the Northeast to 17.2/1000 in the Midwest. We calculated a risk-adjusted measure of outpatient colonoscopy quality, which shows important variation in quality among outpatient facilities. This measure can make transparent the extent to which patients require follow-up hospital care, help inform patient choices, and assist in quality-improvement efforts. Copyright © 2016 AGA Institute. Published by Elsevier Inc. All rights reserved.

Detailed Concepts in Performing Oversight on an Army Radiographic Inspection Site

DTIC Science & Technology

2017-03-01

number of facilities that perform various nondestructive tests , inspections, and evaluations. The U.S. Army Armament Research, Development and...procedures, and documentation in place to conform to nationally recognized standards. This report specifically reviews the radiographic testing ...X-ray Nondestructive testing (NDT) Radiographic testing (RT) Computed tomography (CT) 16. SECURITY

Preliminary Report on Oak Ridge National Laboratory Testing of Drake/ACSS/MA2/E3X

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irminger, Philip; King, Daniel J.; Herron, Andrew N.

2016-01-01

A key to industry acceptance of a new technology is extensive validation in field trials. The Powerline Conductor Accelerated Test facility (PCAT) at Oak Ridge National Laboratory (ORNL) is specifically designed to evaluate the performance and reliability of a new conductor technology under real world conditions. The facility is set up to capture large amounts of data during testing. General Cable used the ORNL PCAT facility to validate the performance of TransPowr with E3X Technology a standard overhead conductor with an inorganic high emissivity, low absorptivity surface coating. Extensive testing has demonstrated a significant improvement in conductor performance across amore » wide range of operating temperatures, indicating that E3X Technology can provide a reduction in temperature, a reduction in sag, and an increase in ampacity when applied to the surface of any overhead conductor. This report provides initial results of that testing.« less

Validity of self-assessment in a quality improvement collaborative in Ecuador.

PubMed

Hermida, Jorge; Broughton, Edward I; Miller Franco, Lynne

2011-12-01

Health care quality improvement (QI) efforts commonly use self-assessment to measure compliance with quality standards. This study investigates the validity of self-assessment of quality indicators. Cross sectional. A maternal and newborn care improvement collaborative intervention conducted in health facilities in Ecuador in 2005. Four external evaluators were trained in abstracting medical records to calculate six indicators reflecting compliance with treatment standards. About 30 medical records per month were examined at 12 participating health facilities for a total of 1875 records. The same records had already been reviewed by QI teams at these facilities (self-assessment). Overall compliance, agreement (using the Kappa statistic), sensitivity and specificity were analyzed. We also examined patterns of disagreement and the effect of facility characteristics on levels of agreement. External evaluators reported compliance of 69-90%, while self-assessors reported 71-92%, with raw agreement of 71-95% and Kappa statistics ranging from fair to almost perfect agreement. Considering external evaluators as the gold standard, sensitivity of self-assessment ranged from 90 to 99% and specificity from 48 to 86%. Simpler indicators had fewer disagreements. When disagreements occurred between self-assessment and external valuators, the former tended to report more positive findings in five of six indicators, but this tendency was not of a magnitude to change program actions. Team leadership, understanding of the tools and facility size had no overall impact on the level of agreement. When compared with external evaluation (gold standard), self-assessment was found to be sufficiently valid for tracking QI team performance. Sensitivity was generally higher than specificity. Simplifying indicators may improve validity.

Specifying and Pilot Testing Quality Measures for the American Society of Addiction Medicine's Standards of Care.

PubMed

Harris, Alex H S; Weisner, Constance M; Chalk, Mady; Capoccia, Victor; Chen, Cheng; Thomas, Cindy Parks

2016-01-01

In 2013, the American Society of Addiction Medicine (ASAM) approved its Standards of Care for the Addiction Specialist Physician. Subsequently, an ASAM Performance Measures Panel identified and prioritized the standards to be operationalized into performance measures. The goal of this study is to describe the process of operationalizing 3 of these standards into quality measures, and to present the initial measure specifications and results of pilot testing these measures in a large health care system. By presenting the process rather than just the end results, we hope to shed light on the measure development process to educate, and also to stimulate debate about the decisions that were made. Each measure was decomposed into major concepts. Then each concept was operationalized using commonly available administrative data sources. Alternative specifications examined and sensitivity analyses were conducted to inform decisions that balanced accuracy, clinical nuance, and simplicity. Using data from the US Veterans Health Administration (VHA), overall performance and variation in performance across 119 VHA facilities were calculated. Three measures were operationalized and pilot tested: pharmacotherapy for alcohol use disorder, pharmacotherapy for opioid use disorder, and timely follow-up after medically managed withdrawal (aka detoxification). Each measure was calculable with available data, and showed ample room for improvement (no ceiling effects) and wide facility-level variability. Next steps include conducting feasibility and pilot testing in other health care systems and other contexts such as standalone addiction treatment programs, and also to study the specification and predictive validity of these measures.

Air Dashboard Help | ECHO | US EPA

EPA Pesticide Factsheets

The dashboards found on the Enforcement and Compliance History Online (ECHO) website are specialized to track both facility and agency performance as they relate to compliance with and enforcement of environmental standards under the Clean Air Act (CAA).

78 FR 14358 - Notice of Lodging of Consent Decree Under the Clean Air Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... violations related to a tire-burning electric generating plant in Ford Heights, Illinois (the ``Facility..., including: (1) The New Source Performance Standards for Industrial Steam Generating Units; (2) the Illinois...

Software Manages Documentation in a Large Test Facility

NASA Technical Reports Server (NTRS)

Gurneck, Joseph M.

2001-01-01

The 3MCS computer program assists and instrumentation engineer in performing the 3 essential functions of design, documentation, and configuration management of measurement and control systems in a large test facility. Services provided by 3MCS are acceptance of input from multiple engineers and technicians working at multiple locations;standardization of drawings;automated cross-referencing; identification of errors;listing of components and resources; downloading of test settings; and provision of information to customers.

Evaluation of a TB infection control implementation initiative in out-patient HIV clinics in Zambia and Botswana.

PubMed

Emerson, C; Lipke, V; Kapata, N; Mwananyambe, N; Mwinga, A; Garekwe, M; Lanje, S; Moshe, Y; Pals, S L; Nakashima, A K; Miller, B

2016-07-01

Out-patient human immunodeficiency virus (HIV) care and treatment clinics in Zambia and Botswana, countries with a high burden of HIV and TB infection. To develop a tuberculosis infection control (TB IC) training and implementation package and evaluate the implementation of TB IC activities in facilities implementing the package. Prospective program evaluation of a TB IC training and implementation package using a standardized facility risk assessment tool, qualitative interviews with facility health care workers and measures of pre- and post-test performance. A composite measure of facility performance in TB IC improved from 32% at baseline to 50% at 1 year among eight facilities in Zambia, and from 27% to 80% at 6 months among 10 facilities in Botswana. Although there was marked improvement in indicators of managerial, administrative and environmental controls, key ongoing challenges remained in ensuring access to personal protective equipment and implementing TB screening in health care workers. TB IC activities at out-patient HIV clinics in Zambia and Botswana improved after training using the implementation package. Continued infrastructure support, as well as monitoring and evaluation, are needed to support the scale-up and sustainability of TB IC programs in facilities in low-resource countries.

Variations in pretransfusion practices.

PubMed

Padget, B J; Hannon, J L

2003-01-01

A variety of pretransfusion tests have been developed to improve the safety and effectiveness of transfusion. Recently, a number of traditional tests have been shown to offer limited clinical benefit and have been eliminated in many facilities. A survey of pretransfusion test practices was distributed to 116 hospital transfusion services. Routine test practices and facility size were analyzed. Ninety-one responses were received. Many smaller laboratories include tests such as anti-A,B, an autocontrol, and DAT, and immediate spin and 37 degrees Celsius microscopic readings. Nine percent never perform an Rh control with anti-D typing on patient samples. Various antibody screening and crossmatch methods are utilized. Individual laboratory test practices should be periodically assessed to ensure that they comply with standards, represent the recognized best practice, and are cost-effective. The survey responses indicate that many laboratories perform tests that are not necessary or cost-effective. These facilities should review their processes to determine which tests contribute to transfusion safety. Smaller facilities may be reluctant to change or lack the expertise necessary for this decision making and often continue to perform tests that have been eliminated in larger facilities. Consultation with larger hospital transfusion services may provide guidance for this change.

49 CFR Appendix A to Part 37 - Modifications to Standards for Accessible Transportation Facilities

Code of Federal Regulations, 2011 CFR

2011-10-01

... Transportation Facilities A Appendix A to Part 37 Transportation Office of the Secretary of Transportation...—Modifications to Standards for Accessible Transportation Facilities The Department of Transportation, in § 37.9 of this part, adopts as its regulatory standards for accessible transportation facilities the revised...

An environmental testing facility for Space Station Freedom power management and distribution hardware

NASA Technical Reports Server (NTRS)

Jackola, Arthur S.; Hartjen, Gary L.

1992-01-01

The plans for a new test facility, including new environmental test systems, which are presently under construction, and the major environmental Test Support Equipment (TSE) used therein are addressed. This all-new Rocketdyne facility will perform space simulation environmental tests on Power Management and Distribution (PMAD) hardware to Space Station Freedom (SSF) at the Engineering Model, Qualification Model, and Flight Model levels of fidelity. Testing will include Random Vibration in three axes - Thermal Vacuum, Thermal Cycling and Thermal Burn-in - as well as numerous electrical functional tests. The facility is designed to support a relatively high throughput of hardware under test, while maintaining the high standards required for a man-rated space program.

EOS MLS Science Data Processing System: A Description of Architecture and Capabilities

NASA Technical Reports Server (NTRS)

Cuddy, David T.; Echeverri, Mark D.; Wagner, Paul A.; Hanzel, Audrey T.; Fuller, Ryan A.

2006-01-01

This paper describes the architecture and capabilities of the Science Data Processing System (SDPS) for the EOS MLS. The SDPS consists of two major components--the Science Computing Facility and the Science Investigator-led Processing System. The Science Computing Facility provides the facilities for the EOS MLS Science Team to perform the functions of scientific algorithm development, processing software development, quality control of data products, and scientific analyses. The Science Investigator-led Processing System processes and reprocesses the science data for the entire mission and delivers the data products to the Science Computing Facility and to the Goddard Space Flight Center Earth Science Distributed Active Archive Center, which archives and distributes the standard science products.

Design of an epithermal column for BNCT based on D D fusion neutron facility

NASA Astrophysics Data System (ADS)

Durisi, E.; Zanini, A.; Manfredotti, C.; Palamara, F.; Sarotto, M.; Visca, L.; Nastasi, U.

2007-05-01

Boron Neutron Capture Therapy (BNCT) is currently performed on patients at nuclear reactors. At the same time the international BNCT community is engaged in the development of alternative facilities for in-hospital treatments. This paper investigates the potential of a novel high-output D-D neutron generator, developed at Lawrence Berkeley National Laboratory (CA, USA), for BNCT. The simulation code MCNP-4C is used to realize an accurate study of the epithermal column in view of the treatment of deep tumours. Different materials and Beam Shaping Assemblies (BSA) are investigated and an optimized configuration is proposed. The neutron beam quality is defined by the standard free beam parameters, calculated averaging over the collimator aperture. The results are discussed and compared with the performances of other facilities.

7 CFR 205.271 - Facility pest management practice standard.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Facility pest management practice standard. 205.271... MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED... Requirements § 205.271 Facility pest management practice standard. (a) The producer or handler of an organic...

Interlaboratory studies and initiatives developing standards for proteomics

PubMed Central

Ivanov, Alexander R.; Colangelo, Christopher M.; Dufresne, Craig P.; Friedman, David B.; Lilley, Kathryn S.; Mechtler, Karl; Phinney, Brett S.; Rose, Kristie L.; Rudnick, Paul A.; Searle, Brian C.; Shaffer, Scott A.; Weintraub, Susan T.

2013-01-01

Proteomics is a rapidly transforming interdisciplinary field of research that embraces a diverse set of analytical approaches to tackle problems in fundamental and applied biology. This view-point article highlights the benefits of interlaboratory studies and standardization initiatives to enable investigators to address many of the challenges found in proteomics research. Among these initiatives, we discuss our efforts on a comprehensive performance standard for characterizing PTMs by MS that was recently developed by the Association of Biomolecular Resource Facilities (ABRF) Proteomics Standards Research Group (sPRG). PMID:23319436

Improving compliance with Occupational Safety and Health Administration standards.

PubMed

Cuming, Richard; Rocco, Tonette S; McEachern, Adriana G

2008-02-01

Health care facilities can be dangerous places. The mission of the Occupational Safety and Health Administration (OSHA) is to improve the safety of the American workplace by developing and implementing standards that prevent occupational injury, illness, and death. Perioperative services are performed in environments where exposure to bloodborne pathogens is a daily occurrence, making implementation and compliance with OSHA standards very important. Employees and employers must remain current with workplace safety requirements, including use of personal protective equipment. This article presents implications of the OSHA standards for employers, educators, and employees.

Virtual EPID standard phantom audit (VESPA) for remote IMRT and VMAT credentialing

NASA Astrophysics Data System (ADS)

Miri, Narges; Lehmann, Joerg; Legge, Kimberley; Vial, Philip; Greer, Peter B.

2017-06-01

A virtual EPID standard phantom audit (VESPA) has been implemented for remote auditing in support of facility credentialing for clinical trials using IMRT and VMAT. VESPA is based on published methods and a clinically established IMRT QA procedure, here extended to multi-vendor equipment. Facilities are provided with comprehensive instructions and CT datasets to create treatment plans. They deliver the treatment directly to their EPID without any phantom or couch in the beam. In addition, they deliver a set of simple calibration fields per instructions. Collected EPID images are uploaded electronically. In the analysis, the dose is projected back into a virtual cylindrical phantom. 3D gamma analysis is performed. 2D dose planes and linear dose profiles are provided and can be considered when needed for clarification. In addition, using a virtual flat-phantom, 2D field-by-field or arc-by-arc gamma analyses are performed. Pilot facilities covering a range of planning and delivery systems have performed data acquisition and upload successfully. Advantages of VESPA are (1) fast turnaround mainly driven by the facility’s capability of providing the requested EPID images, (2) the possibility for facilities performing the audit in parallel, as there is no need to wait for a phantom, (3) simple and efficient credentialing for international facilities, (4) a large set of data points, and (5) a reduced impact on resources and environment as there is no need to transport heavy phantoms or audit staff. Limitations of the current implementation of VESPA for trials credentialing are that it does not provide absolute dosimetry, therefore a Level I audit is still required, and that it relies on correctly delivered open calibration fields, which are used for system calibration. The implemented EPID based IMRT and VMAT audit system promises to dramatically improve credentialing efficiency for clinical trials and wider applications.

Evaluating building performance in healthcare facilities: an organizational perspective.

PubMed

Steinke, Claudia; Webster, Lynn; Fontaine, Marie

2010-01-01

Using the environment as a strategic tool is one of the most cost-effective and enduring approaches for improving public health; however, it is one that requires multiple perspectives. The purpose of this article is to highlight an innovative methodology that has been developed for conducting comprehensive performance evaluations in public sector health facilities in Canada. The building performance evaluation methodology described in this paper is a government initiative. The project team developed a comprehensive building evaluation process for all new capital health projects that would respond to the aforementioned need for stakeholders to be more accountable and to better integrate the larger organizational strategy of facilities. The Balanced Scorecard, which is a multiparadigmatic, performance-based business framework, serves as the underlying theoretical framework for this initiative. It was applied in the development of the conceptual model entitled the Building Performance Evaluation Scorecard, which provides the following benefits: (1) It illustrates a process to link facilities more effectively to the overall mission and goals of an organization; (2) It is both a measurement and a management system that has the ability to link regional facilities to measures of success and larger business goals; (3) It provides a standardized methodology that ensures consistency in assessing building performance; and (4) It is more comprehensive than traditional building evaluations. The methodology presented in this paper is both a measurement and management system that integrates the principles of evidence-based design with the practices of pre- and post-occupancy evaluation. It promotes accountability and continues throughout the life cycle of a project. The advantage of applying this framework is that it engages health organizations in clarifying a vision and strategy for their facilities and helps translate those strategies into action and measurable performance outcomes.

Hazardous Waste Dashboard Help | ECHO | US EPA

EPA Pesticide Factsheets

The dashboards found on the Enforcement and Compliance History Online (ECHO) website are specialized to track both facility and agency performance as they relate to compliance with and enforcement of environmental standards under the Resource Conservation and Recovery Act (RCRA).

Pesticide Dashboard Help | ECHO | US EPA

EPA Pesticide Factsheets

The dashboards found on the Enforcement and Compliance History Online (ECHO) website are specialized to track both facility and agency performance as they relate to compliance with and enforcement of environmental standards under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA).

The Characterization of a Piston Displacement-Type Flowmeter Calibration Facility and the Calibration and Use of Pulsed Output Type Flowmeters

PubMed Central

Mattingly, G. E.

1992-01-01

Critical measurement performance of fluid flowmeters requires proper and quantified verification data. These data should be generated using calibration and traceability techniques established for these verification purposes. In these calibration techniques, the calibration facility should be well-characterized and its components and performance properly traced to pertinent higher standards. The use of this calibrator to calibrate flowmeters should be appropriately established and the manner in which the calibrated flowmeter is used should be specified in accord with the conditions of the calibration. These three steps: 1) characterizing the calibration facility itself, 2) using the characterized facility to calibrate a flowmeter, and 3) using the calibrated flowmeter to make a measurement are described and the pertinent equations are given for an encoded-stroke, piston displacement-type calibrator and a pulsed output flowmeter. It is concluded that, given these equations and proper instrumentation of this type of calibrator, very high levels of performance can be attained and, in turn, these can be used to achieve high fluid flow rate measurement accuracy with pulsed output flowmeters. PMID:28053444

Operating capability and current status of the reactivated NASA Lewis Research Center Hypersonic Tunnel Facility

NASA Technical Reports Server (NTRS)

Thomas, Scott R.; Trefny, Charles J.; Pack, William D.

1995-01-01

The NASA Lewis Research Center's Hypersonic Tunnel Facility (HTF) is a free-jet, blowdown propulsion test facility that can simulate up to Mach-7 flight conditions with true air composition. Mach-5, -6, and -7 nozzles, each with a 42 inch exit diameter, are available. Previously obtained calibration data indicate that the test flow uniformity of the HTF is good. The facility, without modifications, can accommodate models approximately 10 feet long. The test gas is heated using a graphite core induction heater that generates a nonvitiated flow. The combination of clean-air, large-scale, and Mach-7 capabilities is unique to the HTF and enables an accurate propulsion performance determination. The reactivation of the HTF, in progress since 1990, includes refurbishing the graphite heater, the steam generation plant, the gaseous oxygen system, and all control systems. All systems were checked out and recertified, and environmental systems were upgraded to meet current standards. The data systems were also upgraded to current standards and a communication link with NASA-wide computers was added. In May 1994, the reactivation was complete, and an integrated systems test was conducted to verify facility operability. This paper describes the reactivation, the facility status, the operating capabilities, and specific applications of the HTF.

40 CFR 267.151 - Wording of the instruments.

Code of Federal Regulations, 2013 CFR

2013-07-01

... owner or operator of a facility with a standardized permit who uses a financial test to demonstrate... financial officer of an owner or operator of a facility with a standardized permit who use a financial test... (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE FACILITIES OPERATING UNDER A STANDARDIZED...

40 CFR 267.151 - Wording of the instruments.

Code of Federal Regulations, 2011 CFR

2011-07-01

... owner or operator of a facility with a standardized permit who uses a financial test to demonstrate... financial officer of an owner or operator of a facility with a standardized permit who use a financial test... (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE FACILITIES OPERATING UNDER A STANDARDIZED...

40 CFR 267.151 - Wording of the instruments.

Code of Federal Regulations, 2012 CFR

2012-07-01

... owner or operator of a facility with a standardized permit who uses a financial test to demonstrate... financial officer of an owner or operator of a facility with a standardized permit who use a financial test... (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE FACILITIES OPERATING UNDER A STANDARDIZED...

40 CFR 267.151 - Wording of the instruments.

Code of Federal Regulations, 2014 CFR

2014-07-01

... owner or operator of a facility with a standardized permit who uses a financial test to demonstrate... financial officer of an owner or operator of a facility with a standardized permit who use a financial test... (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE FACILITIES OPERATING UNDER A STANDARDIZED...

Infection control challenges in deployed US military treatment facilities.

PubMed

Hospenthal, Duane R; Crouch, Helen K

2009-04-01

Personnel sustaining combat-related injuries in current overseas conflicts continue to have their care complicated by infections caused by multidrug-resistant organisms, including Acinetobacter, Klebsiella, and Pseudomonas. Although presumed to be due to multiple factors both within and outside of the combat theater, concern has been raised about the difficulties in establishing and maintaining standard infection control (IC) practices in deployed medical treatment facilities and in the evacuation of the injured back to the United States. Level III facilities (hospitals capable of holding patients >72 hours) in Iraq and Afghanistan and the evacuation system from Iraq to the continental US were reviewed by an expert IC-infectious disease team. All reviewed facilities had established IC programs, but these were staffed by personnel with limited IC experience, often without perceived adequate time dedicated to perform their duties, and without uniform levels of command emphasis or support. Proper hand hygiene between patients was not always ideal. Isolation and cohorting of patients to decrease multidrug-resistant organism colonization and infection varied among facilities. Review of standard operating procedures found variability among institutions and in quality of these documents. Application of US national and theater-specific guidelines and of antimicrobial control measures also varied among facilities. Effective IC practices are often difficult to maintain in modern US hospitals. In the deployed setting, with ever-changing personnel in a less than optimal practice environment, IC is even more challenging. Standardization of practice with emphasis on the basics of IC practice (e.g., hand hygiene and isolation procedures) needs to be emplaced and maintained in the deployed setting.

A brief, standardized tool for measuring HIV-related stigma among health facility staff: results of field testing in China, Dominica, Egypt, Kenya, Puerto Rico and St. Christopher & Nevis.

PubMed

Nyblade, Laura; Jain, Aparna; Benkirane, Manal; Li, Li; Lohiniva, Anna-Leena; McLean, Roger; Turan, Janet M; Varas-Díaz, Nelson; Cintrón-Bou, Francheska; Guan, Jihui; Kwena, Zachary; Thomas, Wendell

2013-11-13

Within healthcare settings, HIV-related stigma is a recognized barrier to access of HIV prevention and treatment services and yet, few efforts have been made to scale-up stigma reduction programs in service delivery. This is in part due to the lack of a brief, simple, standardized tool for measuring stigma among all levels of health facility staff that works across diverse HIV prevalence, language and healthcare settings. In response, an international consortium led by the Health Policy Project, has developed and field tested a stigma measurement tool for use with health facility staff. Experts participated in a content-development workshop to review an item pool of existing measures, identify gaps and prioritize questions. The resulting questionnaire was field tested in six diverse sites (China, Dominica, Egypt, Kenya, Puerto Rico and St. Christopher & Nevis). Respondents included clinical and non-clinical staff. Questionnaires were self- or interviewer-administered. Analysis of item performance across sites examined both psychometric properties and contextual issues. The key outcome of the process was a substantially reduced questionnaire. Eighteen core questions measure three programmatically actionable drivers of stigma within health facilities (worry about HIV transmission, attitudes towards people living with HIV (PLHIV), and health facility environment, including policies), and enacted stigma. The questionnaire also includes one short scale for attitudes towards PLHIV (5-item scale, α=0.78). Stigma-reduction programmes in healthcare facilities are urgently needed to improve the quality of care provided, uphold the human right to healthcare, increase access to health services, and maximize investments in HIV prevention and treatment. This brief, standardized tool will facilitate inclusion of stigma measurement in research studies and in routine facility data collection, allowing for the monitoring of stigma within healthcare facilities and evaluation of stigma-reduction programmes. There is potential for wide use of the tool either as a stand-alone survey or integrated within other studies of health facility staff.

42 CFR 442.1 - Basis and purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) MEDICAL ASSISTANCE PROGRAMS STANDARDS FOR PAYMENT TO NURSING FACILITIES AND INTERMEDIATE CARE FACILITIES... of services furnished by nursing facilities and intermediate care facilities for individuals with... agreements; Section 1902(a)(28), nursing facility standards; Section 1902(a)(33)(B), State survey agency...

Facility Practice Variation to Help Understand the Effects of Public Policy: Insights from the Dialysis Outcomes and Practice Patterns Study (DOPPS).

PubMed

Fuller, Douglas S; Robinson, Bruce M

2017-01-06

Recent Centers for Medicare & Medicaid Services policies have used dialysis facility practice variation to develop public ratings and adjust payments. In the Dialysis Facility Compare star rating system (DFC SRS), facility-relative rates of performance-based clinical measures varied nearly two-fold for mortality (standardized mortality ratio; 10th/90th percentiles: 0.71, 1.34) and hospitalization (standardized hospitalization ratio; 10th/90th percentiles: 0.64, 1.37), and nearly four-fold for transfusion (standardized transfusion ratio; 10th/90th percentiles: 0.43, 1.65). Medicare claims data (from July of 2014) demonstrate that facility variation for the proportions of patients on hemodialysis hospitalized (10th/90th percentiles: 27%, 50%) and transfused (10th/90th percentiles: 3%, 17%) within 6 months that far exceeds relatively modest recent overall longitudinal trends. DFC SRS-rated facility variation is also substantial for fistula (10th/90th percentiles: 50%, 78%) and catheter use >90 days (10th/90th percentiles: 3%, 19%). By contrast, DFC SRS-rated facility distributions for adult hemodialysis Kt/V>1.2 (10th/90th percentiles: 84%, 97%) and total serum calcium >10.2 mg/dl (median, 1%; 75th/90th percentiles: 3%, 5%) are quite narrow and may be of questionable value. Likewise, variation in the US Dialysis Outcomes and Practice Patterns Study is over two-fold for facility median serum parathyroid hormone (10th/90th percentiles: 290 pg/ml, 629 pg/ml) and ferritin (10th/90th percentiles: 469 ng/ml, 1143 ng/ml) levels, and facility mean treatment time varies by 30 minutes (10th/90th percentiles: 204 minutes, 234 minutes). Rising serum parathyroid hormone and ferritin levels, and generally short dialysis treatment time, represent areas unchecked by existing policy; both overall trends and facility variation in these values may reflect unintended consequences of policy or reimbursement pressures and therefore raise concern. Additionally, outcomes in the transition period from advanced CKD to dialysis remain poor, and policy initiatives and performance accountability in this area remain insufficient. Innovative models of comprehensive care in advanced CKD and the early dialysis period which are more amenable to policy oversight are needed. In summary, facility variation is typically larger than prevailing longitudinal trends, and should not be overlooked. The combination of nationally representative observational databases (e.g., the Dialysis Outcomes and Practice Patterns Study) and ESRD registries can provide policy makers with additional tools to evaluate facility variation, develop policies, and monitor unintended effects. Copyright © 2016 by the American Society of Nephrology.

Consideration of liners and covers in performance assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phifer, Mark A.; Seitz, Robert R.; Suttora, Linda C.

2014-09-18

On-site disposal cells are in use and being considered at several United States Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These disposal cells are typically regulated by States and/or the U.S. Environmental Protection Agency under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) in addition to having to comply with requirements in DOE Order 435.1, Radioactive Waste Management due to the radioactive waste. The USDOE-Environmental Management Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnelmore » associated with these CERCLA disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to CERCLA risk assessments and DOE Order 435.1 performance assessments in support of a Record of Decision and Disposal Authorization Statement, respectively. One of the issues considered by the working group, which is addressed in this report, was how to appropriately consider the performance of covers and liners/leachate collections systems in the context of a DOE Order 435.1 performance assessment (PA). This same information may be appropriate for consideration within CERCLA risk assessments for these facilities. These OSDCs are generally developed to meet hazardous waste (HW) disposal design standards under the Resource Conservation and Recovery Act (RCRA) as well as the DOE Order 435.1 performance based standards for disposal of radioactive waste. To meet the standards for HW, the facilities typically include engineered covers and liner/leachate collection systems. Thus, when considering such facilities in the context of a DOE Order 435.1 PA, there is a need to address the evolution of performance of covers and liner/leachate collection systems in the context of meeting a performance standard considering time frames of 1,000 years for compliance and potentially thousands of years based on the wastes to test the robustness of the system. Experience has shown that there are a range of expectations and perspectives from the different regulators involved at different sites when reviewing assumptions related to cover and liner/leachate collection system performance. However for HW disposal alone under RCRA the design standards are typically considered sufficient by the regulators without a requirement to assess long-term performance thus avoiding the need to consider the details addressed in this report. This report provides suggestions for a general approach to address covers and liners/leachate collection systems in a DOE Order 435.1 PA and how to integrate assessments with defense-in-depth considerations such as design, operations, and waste acceptance criteria to address uncertainties. The emphasis is on water balances and management in such assessments. Specific information and references are provided for details needed to address the evolution of individual components of cover and liner/leachate collection systems. This information was then synthesized into suggestions for best practices for cover and liner system design and examples of approaches to address the performance of covers and liners as part of a performance assessment of the disposal system. Numerous references are provided for sources of information to help describe the basis for performance of individual components of cover and liner systems.« less

9 CFR 3.27 - Facilities, outdoor.

Code of Federal Regulations, 2010 CFR

2010-01-01

... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Guinea Pigs and Hamsters Facilities and Operating Standards § 3.27 Facilities, outdoor. (a) Hamsters shall not be housed in outdoor facilities. (b) Guinea pigs shall not be housed in outdoor facilities unless...

Facilities maintenance handbook

NASA Technical Reports Server (NTRS)

1991-01-01

This handbook is a guide for facilities maintenance managers. Its objective is to set minimum facilities maintenance standards. It also provides recommendations on how to meet the standards to ensure that NASA maintains its facilities in a manner that protects and preserves its investment in the facilities in a cost-effective manner while safely and efficiently performing its mission. This handbook implements NMI 8831.1, which states NASA facilities maintenance policy and assigns organizational responsibilities for the management of facilities maintenance activities on all properties under NASA jurisdiction. It is a reference for facilities maintenance managers, not a step-by-step procedural manual. Because of the differences in NASA Field Installation organizations, this handbook does not assume or recommend a typical facilities maintenance organization. Instead, it uses a systems approach to describe the functions that should be included in any facilities maintenance management system, regardless of its organizational structure. For documents referenced in the handbook, the most recent version of the documents is applicable. This handbook is divided into three parts: Part 1 specifies common definitions and facilities maintenance requirements and amplifies the policy requirements contained in NMI 8831. 1; Part 2 provides guidance on how to meet the requirements of Part 1, containing recommendations only; Part 3 contains general facilities maintenance information. One objective of this handbook is to fix commonality of facilities maintenance definitions among the Centers. This will permit the application of uniform measures of facilities conditions, of the relationship between current replacement value and maintenance resources required, and of the backlog of deferred facilities maintenance. The utilization of facilities maintenance system functions will allow the Centers to quantitatively define maintenance objectives in common terms, prepare work plans, and develop management information in order to statistically identify and analyze variances from those plans. It will also add credibility to the NASA facilities maintenance budgeting process. The key to a successful maintenance program is the understanding and support of the senior Center managers.

Clinical Practice Guideline Implementation Strategy Patterns in Veterans Affairs Primary Care Clinics

PubMed Central

Hysong, Sylvia J; Best, Richard G; Pugh, Jacqueline A

2007-01-01

Background The Department of Veterans Affairs (VA) mandated the system-wide implementation of clinical practice guidelines (CPGs) in the mid-1990s, arming all facilities with basic resources to facilitate implementation; despite this resource allocation, significant variability still exists across VA facilities in implementation success. Objective This study compares CPG implementation strategy patterns used by high and low performing primary care clinics in the VA. Research Design Descriptive, cross-sectional study of a purposeful sample of six Veterans Affairs Medical Centers (VAMCs) with high and low performance on six CPGs. Subjects One hundred and two employees (management, quality improvement, clinic personnel) involved with guideline implementation at each VAMC primary care clinic. Measures Participants reported specific strategies used by their facility to implement guidelines in 1-hour semi-structured interviews. Facilities were classified as high or low performers based on their guideline adherence scores calculated through independently conducted chart reviews. Findings High performing facilities (HPFs) (a) invested significantly in the implementation of the electronic medical record and locally adapting it to provider needs, (b) invested dedicated resources to guideline-related initiatives, and (c) exhibited a clear direction in their strategy choices. Low performing facilities exhibited (a) earlier stages of development for their electronic medical record, (b) reliance on preexisting resources for guideline implementation, with little local adaptation, and (c) no clear direction in their strategy choices. Conclusion A multifaceted, yet targeted, strategic approach to guideline implementation emphasizing dedicated resources and local adaptation may result in more successful implementation and higher guideline adherence than relying on standardized resources and taxing preexisting channels. PMID:17355583

Compliance with the Aerospace MACT Standard at Lockheed Martin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurucz, K.L.; Vicars, S.; Fetter, S.

1997-12-31

Actions taken and planned at four Lockheed Martin Corporation (LMC) facilities to comply with the Aerospace MACT Standard are reviewed. Many LMC sites have taken proactive steps to reduce emissions and implement low VOC coating technology. Significant administrative, facility, and material challenges remain to achieve compliance with the upcoming NESHAP and Control Technology Guideline (CTG) standards. The facilities discussed herein set up programs to develop and implement compliance strategies. These facilities manufacture military aircraft, missiles, satellites, rockets, and electronic guidance and communications systems. Some of the facilities are gearing up for new production lines subject to new source MACT standards.more » At this time the facilities are reviewing compliance status of all primers, topcoats, maskants and solvents subject to the standard. Facility personnel are searching for the most efficient methods of satisfying the recordkeeping, reporting and monitoring, sections of the standards while simultaneously preparing or reviewing their Title V permit applications. Facility decisions on paint booths are the next highest priority. Existing dry filter paint booths will be subject to the filtration standard for existing paint booths which requires the use of two-stage filters. Planned paint booths for the F-22 program, and other new booths must comply with the standard for new and rebuilt booths which requires three stage or HEPA filters. Facilities looking to replace existing water wash paint booths, and those required to retrofit the air handling equipment to accommodate the two-stage filters, are reviewing issues surrounding the rebuilt source definition.« less

48 CFR 2823.107 - Compliance responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Programs ENVIRONMENT, CONSERVATION, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Pollution Control and Clean Air and Water 2823.107 Compliance responsibilities. If a contracting officer becomes aware of noncompliance with clean air, water or other affected media standards in facilities used in performing nonexempt...

40 CFR 430.15 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

..., concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used shall be subject to pentachlorophenol and trichlorophenol limitations. Permittees not using chlorophenolic-containing biocides must...

40 CFR 430.75 - New source performance standards (NSPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

...-continuous dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration... are only applicable at facilities where chlorophenolic-containing biocides are used. Permittees not using chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not...

40 CFR 430.75 - New source performance standards (NSPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

...-continuous dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration... are only applicable at facilities where chlorophenolic-containing biocides are used. Permittees not using chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not...

40 CFR 432.85 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

..., fecal coliform, O&G, and TSS specified in § 432.82(a). (b) Facilities that generate more than 50 million pounds per year of finished products must achieve the limitations for BOD5, fecal coliform, O&G, and TSS...

40 CFR 432.65 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

..., fecal coliform, O&G, and TSS specified in § 432.62(a). (b) Facilities that generate more than 50 million pounds per year of finished products must achieve the limitations for BOD5, fecal coliform, O&G, and TSS...

40 CFR 432.85 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

..., fecal coliform, O&G, and TSS specified in § 432.82(a). (b) Facilities that generate more than 50 million pounds per year of finished products must achieve the limitations for BOD5, fecal coliform, O&G, and TSS...

NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for

Science.gov Websites

Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities December 1, 2017 The U.S vehicle maintenance facilities with a new handbook and webinar that outline safety factors and standards

Fully Disposable Manufacturing Concepts for Clinical and Commercial Manufacturing and Ballroom Concepts.

PubMed

Boedeker, Berthold; Goldstein, Adam; Mahajan, Ekta

2017-11-04

The availability and use of pre-sterilized disposables has greatly changed the methods used in biopharmaceuticals development and production, particularly from mammalian cell culture. Nowadays, almost all process steps from cell expansion, fermentation, cell removal, and purification to formulation and storage of drug substances can be carried out in disposables, although there are still limitations with single-use technologies, particularly in the areas of pretesting and quality control of disposables, bag and connections standardization and qualification, extractables and leachables (E/L) validation, and dependency on individual vendors. The current status of single-use technologies is summarized for all process unit operations using a standard mAb process as an example. In addition, current pros and cons of using disposables are addressed in a comparative way, including quality control and E/L validation.The continuing progress in developing single-use technologies has an important impact on manufacturing facilities, resulting in much faster, less expensive and simpler plant design, start-up, and operation, because cell culture process steps are no longer performed in hard-piped unit operations. This leads to simpler operations in a lab-like environment. Overall it enriches the current landscape of available facilities from standard hard-piped to hard-piped/disposables hybrid to completely single-use-based production plants using the current segregation and containment concept. At the top, disposables in combination with completely and functionally closed systems facilitate a new, revolutionary design of ballroom facilities without or with much less segregation, which enables us to perform good manufacturing practice manufacturing of different products simultaneously in unclassified but controlled areas.Finally, single-use processing in lab-like shell facilities is a big enabler of transferring and establishing production in emergent countries, and this is described in more detail in 7. Graphical Abstract.

Developing and Implementing a Quality Assurance Strategy for Electroconvulsive Therapy.

PubMed

Hollingsworth, Jessa; Baliko, Beverly; McKinney, Selina; Rosenquist, Peter

2018-04-17

The literature provides scant guidance in effective quality assurance strategies concerning the use of electroconvulsive therapy (ECT) for the treatment of psychiatric conditions. Numerous guidelines are published that provide guidance in the delivery of care; however, little has been done to determine how a program or facility might ensure compliance to best practice for safety, tolerability, and efficacy in performing ECT. The objective of this project was to create a quality assurance strategy specific to ECT. Determining standards for quality care and clarifying facility policy were key outcomes in establishing an effective quality assurance strategy. An audit tool was developed utilizing quality criteria derived from a systematic review of ECT practice guidelines, peer review, and facility policy. All ECT procedures occurring over a 2-month period of May to June 2017 were retrospectively audited and compared against target compliance rates set for the facility's ECT program. Facility policy was adapted to reflect quality standards, and audit findings were used to inform possible practice change initiatives, were used to create benchmarks for continuous quality monitoring, and were integrated into regular hospital quality meetings. Clarification on standards of care and the use of clinical auditing in ECT was an effective starting point in the development of a quality assurance strategy. Audit findings were successfully integrated into the hospital's overall quality program, and recognition of practice compliance informed areas for future quality development and policy revision in this small community-based hospital in the southeastern United States. This project sets the foundation for a quality assurance strategy that can be used to help monitor procedural safety and guide future improvement efforts in delivering ECT. Although it is just the first step in creating meaningful quality improvement, setting clear standards and identifying areas of greatest clinical need were crucial beginning for this hospital's growing program.

The Business Value of Superior Energy Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKane, Aimee; Scheihing, Paul; Evans, Tracy

Industrial facilities participating in the U.S. Department of Energy’s (US DOE) Superior Energy Performance (SEP) program are finding that it provides them with significant business value. This value starts with the implementation of ISO 50001-Energy management system standard, which provides an internationally-relevant framework for integration of energy management into an organization’s business processes. The resulting structure emphasizes effective use of available data and supports continual improvement of energy performance. International relevance is particularly important for companies with a global presence or trading interests, providing them with access to supporting ISO standards and a growing body of certified companies representing themore » collective knowledge of communities of practice. This paper examines the business value of SEP, a voluntary program that builds on ISO 50001, inviting industry to demonstrate an even greater commitment through third-party verification of energy performance improvement to a specified level of achievement. Information from 28 facilities that have already achieved SEP certification will illustrate key findings concerning both the value and the challenges from SEP/ISO 50001 implementation. These include the facilities’ experience with implementation, internal and external value of third-party verification of energy performance improvement; attractive payback periods and the importance of SEP tools and guidance. US DOE is working to bring the program to scale, including the Enterprise-Wide Accelerator (SEP for multiple facilities in a company), the Ratepayer-Funded Program Accelerator (supporting tools for utilities and program administrators to include SEP in their program offerings), and expansion of the program to other sectors and industry supply chains.« less

First regulatory inspections measuring adherence to Good Pharmacy Practices in the public sector in Uganda: a cross-sectional comparison of performance between supervised and unsupervised facilities.

PubMed

Trap, Birna; Kikule, Kate; Vialle-Valentin, Catherine; Musoke, Richard; Lajul, Grace Otto; Hoppenworth, Kim; Konradsen, Dorthe

2016-01-01

Since its inception, the Uganda National Drug Authority (NDA) has regularly inspected private sector pharmacies to monitor adherence to Good Pharmacy Practices (GPP). This study reports findings from the first public facility inspections following an intervention (SPARS: Supervision, Performance Assessment, and Recognition Strategy) to build GPP and medicines management capacity in the public sector. The study includes 455 public facilities: 417 facilities were inspected after at least four SPARS visits by trained managerial district staff (SPARS group), 38 before any exposure to SPARS. NDA inspectors measured 10 critical, 20 major, and 37 minor GPP indicators in every facility and only accredited facilities that passed all 10 critical and failed no more than 7 major indicators. Lack of compliance for a given indicator was defined as less than 75 % facilities passing that indicator. We assessed factors associated with certification using logistic regression analysis and compared number of failed indicators between the SPARS and comparative groups using two sample t-tests with equal or unequal variance. 57.4 % of inspected facilities obtained GPP certification: 57.1 % in the SPARS and 60.5 % in the comparative group (Adj. OR = 0.91, 95 % CI 0.45-1.85, p = 0.802). Overall, facilities failed an average of 10 indicators. SPARS facilities performed better than comparative facilities (9 (SD 6.1) vs. 13 (SD 7.7) failed indicators respectively; p = 0.017), and SPARS supported facilities scored better on indicators covered by SPARS. For all indicators but one minor, performance in the SPARS group was equal to or significantly better than in unsupervised facilities. Within the SPARS (intervention) group, certified facilities had < 75 % compliance on 7 indicators (all minor), and uncertified facilities on 19 (4 critical, 2 major, and 13 minor) indicators. Half of the Ugandan population obtains medicines from the public sector. Yet, we found only 3/5 of inspected public health facilities meet GPP standards. SPARS facilities tended to perform better than unsupervised facilities, substantiating the value of supporting supervision interventions in GPP areas that need strengthening. None compliant indicators can be improved through practices and behavioral changes; some require infrastructure investments. We conclude that regular NDA inspections of public sector pharmacies in conjunction with interventions to improve GPP adherence can revolutionize patient care in Uganda.

The Fundamental Neutron Physics Facilities at NIST.

PubMed

Nico, J S; Arif, M; Dewey, M S; Gentile, T R; Gilliam, D M; Huffman, P R; Jacobson, D L; Thompson, A K

2005-01-01

The program in fundamental neutron physics at the National Institute of Standards and Technology (NIST) began nearly two decades ago. The Neutron Interactions and Dosimetry Group currently maintains four neutron beam lines dedicated to studies of fundamental neutron interactions. The neutrons are provided by the NIST Center for Neutron Research, a national user facility for studies that include condensed matter physics, materials science, nuclear chemistry, and biological science. The beam lines for fundamental physics experiments include a high-intensity polychromatic beam, a 0.496 nm monochromatic beam, a 0.89 nm monochromatic beam, and a neutron interferometer and optics facility. This paper discusses some of the parameters of the beam lines along with brief presentations of some of the experiments performed at the facilities.

The Fundamental Neutron Physics Facilities at NIST

PubMed Central

Nico, J. S.; Arif, M.; Dewey, M. S.; Gentile, T. R.; Gilliam, D. M.; Huffman, P. R.; Jacobson, D. L.; Thompson, A. K.

2005-01-01

The program in fundamental neutron physics at the National Institute of Standards and Technology (NIST) began nearly two decades ago. The Neutron Interactions and Dosimetry Group currently maintains four neutron beam lines dedicated to studies of fundamental neutron interactions. The neutrons are provided by the NIST Center for Neutron Research, a national user facility for studies that include condensed matter physics, materials science, nuclear chemistry, and biological science. The beam lines for fundamental physics experiments include a high-intensity polychromatic beam, a 0.496 nm monochromatic beam, a 0.89 nm monochromatic beam, and a neutron interferometer and optics facility. This paper discusses some of the parameters of the beam lines along with brief presentations of some of the experiments performed at the facilities. PMID:27308110

Accountability for quality of care: Monitoring all aspects of quality across a framework adapted for action.

PubMed

Hulton, Louise; Matthews, Zoë; Bandali, Sarah; Izge, Abubakar; Daroda, Ramatu; Stones, William

2016-01-01

Quality of care is essential to maternal and newborn survival. The multidimensional nature of quality of care means that frameworks are useful for capturing it. The present paper proposes an adaptation to a widely used quality of care framework for maternity services. The framework subdivides quality into two inter-related dimensions-provision and experience of care-but suggests adaptations to reflect changes in the concept of quality over the past 15years. The application of the updated framework is presented in a case study, which uses it to measure and inform quality improvements in northern Nigeria across the reproductive, maternal, newborn, and child health continuum of care. Data from 231 sampled basic and comprehensive emergency obstetric and newborn care (BEmONC and CEmONC) facilities in six northern Nigerian states showed that only 35%-47% of facilities met minimum quality standards in infrastructure. Standards for human resources performed better with 49%-73% reaching minimum standards. A framework like this could form the basis for a certification scheme. Certification offers a practical and concrete opportunity to drive quality standards up and reward good performance. It also offers a mechanism to strengthen accountability. Copyright © 2015 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Nursing home facilities in Malaysia (premise, shared facilities & individual accommodation: Space requirement): A literature review

NASA Astrophysics Data System (ADS)

Nordin, Nik Muhammad Faris Bin Nik; Hasbollah, Hasif Rafidee bin; Ibrahim, Mohd Asrul Hery Bin; Marican, Nor Dalila bin; Halim, Muhd Hafzal bin Abdul; Rashid, Ahmad Faezi Bin Ab.; Yasin, Nurul Hafizah Binti Mohd

2017-10-01

The numbers of elderly in Malaysia are increased every year. The request towards elderly care services necessitated by the Nursing Home are in demand. However, Nursing Home in Malaysia is lack of standard of facilities in order to cater the care services for the elderly. This paper intends review the minimum standard facilities for the Nursing Homes in globally. The paper also offered insights in developing standard Nursing Home facilities in Malaysia.

ARM Data File Standards Version: 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kehoe, Kenneth; Beus, Sherman; Cialella, Alice

2014-04-01

The Atmospheric Radiation Measurement (ARM) Climate Research Facility performs routine in situ and remote-sensing observations to provide a detailed and accurate description of the Earth atmosphere in diverse climate regimes. The result is a diverse data sets containing observational and derived data, currently accumulating at a rate of 30 TB of data and 150,000 different files per month (http://www.archive.arm.gov/stats/storage2.html). Continuing the current processing while scaling this to even larger sizes is extremely important to the ARM Facility and requires consistent metadata and data standards. The standards described in this document will enable development of automated analysis and discovery tools formore » the ever-growing volumes of data. It also will enable consistent analysis of the multiyear data, allow for development of automated monitoring and data health status tools, and facilitate development of future capabilities for delivering data on demand that can be tailored explicitly to user needs. This analysis ability will only be possible if the data follows a minimum set of standards. This document proposes a hierarchy that includes required and recommended standards.« less

40 CFR 430.65 - New source performance standards (NSPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.15 - New source performance standards (NSPS).

Code of Federal Regulations, 2012 CFR

2012-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.45 - New source performance standards (NSPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.65 - New source performance standards (NSPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.15 - New source performance standards (NSPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.15 - New source performance standards (NSPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.35 - New source performance standards (NSPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.45 - New source performance standards (NSPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.35 - New source performance standards (NSPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... dischargers, concentration limitations (mg/l) shall apply, where provided. Concentration limitations will only apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these...

40 CFR 430.65 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

...-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used shall be subject to pentachlorophenol and trichlorophenol limitations. Permittees not using chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides: Subpart F [NSPS] Pollutant...

40 CFR 430.15 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

...-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used shall be subject to pentachlorophenol and trichlorophenol limitations. Permittees not using chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides: Subpart A [NSPS] Pollutant...

40 CFR 430.45 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

...-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used shall be subject to pentachlorophenol and trichlorophenol limitations. Permittees not using chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides: Subpart D [NSPS for...

40 CFR 430.35 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

...-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used shall be subject to pentachlorophenol and trichlorophenol limitations. Permittees not using chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides: Subpart C [NSPS for...

10 CFR 61.43 - Protection of individuals during operations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 61.43 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Performance Objectives § 61.43 Protection of individuals during operations. Operations at the land disposal facility must be conducted in compliance with the standards for radiation protection...

10 CFR 61.43 - Protection of individuals during operations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 61.43 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Performance Objectives § 61.43 Protection of individuals during operations. Operations at the land disposal facility must be conducted in compliance with the standards for radiation protection...

10 CFR 61.43 - Protection of individuals during operations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 61.43 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Performance Objectives § 61.43 Protection of individuals during operations. Operations at the land disposal facility must be conducted in compliance with the standards for radiation protection...

10 CFR 61.43 - Protection of individuals during operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 61.43 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Performance Objectives § 61.43 Protection of individuals during operations. Operations at the land disposal facility must be conducted in compliance with the standards for radiation protection...

10 CFR 61.43 - Protection of individuals during operations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 61.43 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Performance Objectives § 61.43 Protection of individuals during operations. Operations at the land disposal facility must be conducted in compliance with the standards for radiation protection...

Ultrasound Metrology in Mexico: a round robin test for medical diagnostics

NASA Astrophysics Data System (ADS)

Amezola Luna, R.; López Sánchez, A. L.; Elías Juárez, A. A.

2011-02-01

This paper presents preliminary statistical results from an on-going imaging medical ultrasound study, of particular relevance for gynecology and obstetrics areas. Its scope is twofold, firstly to compile the medical ultrasound infrastructure available in cities of Queretaro-Mexico, and second to promote the use of traceable measurement standards as a key aspect to assure quality of ultrasound examinations performed by medical specialists. The experimental methodology is based on a round robin test using an ultrasound phantom for medical imaging. The physician, using its own ultrasound machine, couplant and facilities, measures the size and depth of a set of pre-defined reflecting and absorbing targets of the reference phantom, which simulate human illnesses. Measurements performed give the medical specialist an objective feedback regarding some performance characteristics of their ultrasound examination systems, such as measurement system accuracy, dead zone, axial resolution, depth of penetration and anechoic targets detection. By the end of March 2010, 66 entities with medical ultrasound facilities, from both public and private institutions, have performed measurements. A network of medical ultrasound calibration laboratories in Mexico, with traceability to The International System of Units via national measurement standards, may indeed contribute to reduce measurement deviations and thus attain better diagnostics.

Feasibility study for a numerical aerodynamic simulation facility. Volume 2: Hardware specifications/descriptions

NASA Technical Reports Server (NTRS)

Green, F. M.; Resnick, D. R.

1979-01-01

An FMP (Flow Model Processor) was designed for use in the Numerical Aerodynamic Simulation Facility (NASF). The NASF was developed to simulate fluid flow over three-dimensional bodies in wind tunnel environments and in free space. The facility is applicable to studying aerodynamic and aircraft body designs. The following general topics are discussed in this volume: (1) FMP functional computer specifications; (2) FMP instruction specification; (3) standard product system components; (4) loosely coupled network (LCN) specifications/description; and (5) three appendices: performance of trunk allocation contention elimination (trace) method, LCN channel protocol and proposed LCN unified second level protocol.

Check-Standard Testing Across Multiple Transonic Wind Tunnels with the Modern Design of Experiments

NASA Technical Reports Server (NTRS)

Deloach, Richard

2012-01-01

This paper reports the result of an analysis of wind tunnel data acquired in support of the Facility Analysis Verification & Operational Reliability (FAVOR) project. The analysis uses methods referred to collectively at Langley Research Center as the Modern Design of Experiments (MDOE). These methods quantify the total variance in a sample of wind tunnel data and partition it into explained and unexplained components. The unexplained component is further partitioned in random and systematic components. This analysis was performed on data acquired in similar wind tunnel tests executed in four different U.S. transonic facilities. The measurement environment of each facility was quantified and compared.

Board evaluation and effectiveness: models, components and perspectives.

PubMed

Scharf, M; Marty, D; Barnsley, J

1994-01-01

Health facility boards are being challenged to increase their effectiveness in the face of the changing health care environment. To this end, accreditation standards require boards to develop methods of evaluating their governing function and performance. During a survey of governance issues, the authors interviewed a group of health service executives with respect to board evaluation at their facilities. The responses yielded insights relating to models and components of evaluation, board missions and policies, mentoring programs and trustee education and orientation.

Design and Testing of Scaled Ejector-Diffusers for Jet Engine Test Facility Applications.

DTIC Science & Technology

1983-09-01

the test cell such that the exhaust will be vented into an augmenting tube which acts as an ejector -diffuser assembly. 11 The kinetic energy of the...OF STANDARDS-1963-A ..’I -Dy , - 77 *4********* Z 7.77- NAVAL POSTGRADUATE SCHOOL Monterey, California W I THESIS DESIGN AND TESTING OF SCALED EJECTOR ...PERIOD COVERED Design and Testing of Scaled Ejector - "flglfeerls Thesis~ Diffusers for Jet Engine Test Facility Spebr18 S. PERFORMING ORG. REPORT

Coupled Facility-Payload Vibration Modeling Improvements

NASA Technical Reports Server (NTRS)

Carnahan, Timothy M.; Kaiser, Michael A.

2015-01-01

A major phase of aerospace hardware verification is vibration testing. The standard approach for such testing is to use a shaker to induce loads into the payload. In preparation for vibration testing at National Aeronautics and Space Administration/Goddard Space Flight Center an analysis is performed to assess the responses of the payload. A new method of modeling the test is presented that takes into account dynamic interactions between the facility and the payload. This dynamic interaction has affected testing in the past, but been ignored or adjusted for during testing. By modeling the combined dynamics of the facility and test article (payload) it is possible to improve the prediction of hardware responses. Many aerospace test facilities work in similar way to those at NASA/Goddard Space Flight Center. Lessons learned here should be applicable to other test facilities with similar setups.

Uniform Federal Accessibility Standards.

ERIC Educational Resources Information Center

Department of Housing and Urban Development, Washington, DC.

The document presents uniform standards for facility accessibility by physically handicapped persons for Federal and federally funded facilities. The standards are to be applied during the design, construction, and alteration of buildings and facilities to the extent required by the Architectural Barriers Act of 1968, as amended. Technical…

Sandia National Laboratories Facilities Management and Operations Center Design Standards Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Timothy L.

2014-09-01

At Sandia National Laboratories in New Mexico (SNL/NM), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/NM applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. Themore » safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule. These design standards generally apply to all disciplines on all SNL/NM projects. Architectural and engineering design must be both functional and cost-effective. Facility design must be tailored to fit its intended function, while emphasizing low-maintenance, energy-efficient, and energy-conscious design. Design facilities that can be maintained easily, with readily accessible equipment areas, low maintenance, and quality systems. To promote an orderly and efficient appearance, architectural features of new facilities must complement and enhance the existing architecture at the site. As an Architectural and Engineering (A/E) professional, you must advise the Project Manager when this approach is prohibitively expensive. You are encouraged to use professional judgment and ingenuity to produce a coordinated interdisciplinary design that is cost-effective, easily contractible or buildable, high-performing, aesthetically pleasing, and compliant with applicable building codes. Close coordination and development of civil, landscape, structural, architectural, fire protection, mechanical, electrical, telecommunications, and security features is expected to ensure compatibility with planned functional equipment and to facilitate constructability. If portions of the design are subcontracted to specialists, delivery of the finished design documents must not be considered complete until the subcontracted portions are also submitted for review. You must, along with support consultants, perform functional analyses and programming in developing design solutions. These solutions must reflect coordination of the competing functional, budgetary, and physical requirements for the project. During design phases, meetings between you and the SNL/NM Project Team to discuss and resolve design issues are required. These meetings are a normal part of the design process. For specific design-review requirements, see the project-specific Design Criteria. In addition to the design requirements described in this manual, instructive information is provided to explain the sustainable building practice goals for design, construction, operation, and maintenance of SNL/NM facilities. Please notify SNL/NM personnel of design best practices not included in this manual, so they can be incorporated in future updates. You must convey all documents describing work to the SNL/NM Project Manager in both hard copy and in an electronic format compatible with the SNL/NM-prescribed CADD and other software packages, and in accordance with a SNL/NM approved standard format. Print all hard copy versions of submitted documents (excluding drawings and renderings) double-sided when practical.« less

9 CFR 3.25 - Facilities, general.

Code of Federal Regulations, 2010 CFR

2010-01-01

... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Guinea Pigs and Hamsters Facilities and Operating Standards § 3.25 Facilities, general. (a) Structural strength. Indoor and outdoor housing facilities for guinea pigs or hamsters shall be structurally sound and...

Creating Standards-Based Technology Education Facilities

ERIC Educational Resources Information Center

Daugherty, Michael K.; Klenke, Andrew M.; Neden, Michael

2008-01-01

One of the most intimidating tasks faced by new or practicing technology education teachers is the challenge of creating new facilities or renovating current facilities for a new purpose. While the fourth program standard in "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards (AETL)"…

MANUAL OF STANDARDS FOR REHABILITATION CENTERS AND FACILITIES.

ERIC Educational Resources Information Center

CANIFF, CHARLES E.; AND OTHERS

A 5-YEAR PROJECT TO SPECIFY STANDARDS OF REHABILITATION CENTERS AND FACILITIES RESULTED IN THREE PUBLICATIONS. THIS MANUAL INCLUDES THE CHARACTERISTICS AND GOALS OF REHABILITATION FACILITIES. THE STANDARDS FOR ORGANIZATION, SERVICES THAT SHOULD BE PROVIDED, PERSONNEL INCLUDED, RECORDS AND REPORTS, FISCAL MANAGEMENT, AND THE PHYSICAL PLANT ARE…

Effects of physician-owned specialized facilities in health care: a systematic review.

PubMed

Trybou, Jeroen; De Regge, Melissa; Gemmel, Paul; Duyck, Philippe; Annemans, Lieven

2014-12-01

Multiple studies have investigated physician-owned specialized facilities (specialized hospitals and ambulatory surgery centres). However, the evidence is fragmented and the literature lacks cohesion. To provide a comprehensive overview of the effects of physician-owned specialized facilities by synthesizing the findings of published empirical studies. Two reviewers independently researched relevant studies using a standardized search strategy. The Institute of Medicine's quality framework (safe, effective, equitable, efficient, patient-centred, and accessible care) was applied in order to evaluate the performance of such facilities. In addition, the impact on the performance of full-service general hospitals was assessed. Forty-six studies were included in the systematic review. Overall, the quality of the included studies was satisfactory. Our results show that little evidence exists to confirm the advantages attributed to physician-owned specialized facilities, and their impact on full-service general hospitals remains limited. Although data is available on a wide variety of effects, the evidence base is surprisingly thin. There is no compelling evidence available demonstrating the added value of physician-owned specialized facilities in terms of quality or cost of the delivered care. More research is necessary on the relative merits of physician-owned specialized facilities. In addition, their corresponding impact on full-service general hospitals remains unclear. The development of physician-owned specialized facilities should thus be monitored carefully. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

The Educator's "Action" Office.

ERIC Educational Resources Information Center

Martin, Dikran J.

Design criteria, standards, and human factors related to designing and planning flexible and efficient work environments for college faculty members are overviewed with six model (example) office plans included. The physical and psychological design needs in such an office facility are given, with task performance data on student faculty…

75 FR 27249 - Standards of Performance for New Stationary Sources and Emissions Guidelines for Existing Sources...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... other health care 325411 facilities, commercial 325412 research laboratories, 562213 commercial waste... hearing is held, it will be held at EPA's Campus located at 109 T.W. Alexander Drive in Research Triangle... (E143-03), [[Page 27250

14 CFR 125.287 - Initial and recurrent pilot testing requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., instrument approach facilities and procedures; (5) Air traffic control procedures, including IFR procedures... certificate holder; (2) For each type of airplane to be flown by the pilot, the airplane powerplant, major components and systems, major appliances, performance and operating limitations, standard and emergency...

Education in the Scottish Parliament.

ERIC Educational Resources Information Center

Donn, Gari

2000-01-01

Reviews some educational issues arising during the first year of the new Scottish Parliament. Discusses facility problems and funding needs of small rural schools, debate over what constitutes standards and which performance indicators should be included in legislation, proposed accountability structures for local education authorities, and the…

Postirradiation Testing Laboratory (327 Building)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kammenzind, D.E.

A Standards/Requirements Identification Document (S/RID) is the total list of the Environment, Safety and Health (ES and H) requirements to be implemented by a site, facility, or activity. These requirements are appropriate to the life cycle phase to achieve an adequate level of protection for worker and public health and safety, and the environment during design, construction, operation, decontamination and decommissioning, and environmental restoration. S/RlDs are living documents, to be revised appropriately based on change in the site`s or facility`s mission or configuration, a change in the facility`s life cycle phase, or a change to the applicable standards/requirements. S/RIDs encompassmore » health and safety, environmental, and safety related safeguards and security (S and S) standards/requirements related to the functional areas listed in the US Department of Energy (DOE) Environment, Safety and Health Configuration Guide. The Fluor Daniel Hanford (FDH) Contract S/RID contains standards/requirements, applicable to FDH and FDH subcontractors, necessary for safe operation of Project Hanford Management Contract (PHMC) facilities, that are not the direct responsibility of the facility manager (e.g., a site-wide fire department). Facility S/RIDs contain standards/requirements applicable to a specific facility that are the direct responsibility of the facility manager. S/RlDs are prepared by those responsible for managing the operation of facilities or the conduct of activities that present a potential threat to the health and safety of workers, public, or the environment, including: Hazard Category 1 and 2 nuclear facilities and activities, as defined in DOE 5480.23. Selected Hazard Category 3 nuclear, and Low Hazard non-nuclear facilities and activities, as agreed upon by RL. The Postirradiation Testing Laboratory (PTL) S/RID contains standards/ requirements that are necessary for safe operation of the PTL facility, and other building/areas that are the direct responsibility of the specific facility manager. The specific DOE Orders, regulations, industry codes/standards, guidance documents and good industry practices that serve as the basis for each element/subelement are identified and aligned with each subelement.« less

Content of system design descriptions

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all themore » attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective.« less

Reproducibility in light microscopy: Maintenance, standards and SOPs.

PubMed

Deagle, Rebecca C; Wee, Tse-Luen Erika; Brown, Claire M

2017-08-01

Light microscopy has grown to be a valuable asset in both the physical and life sciences. It is a highly quantitative method available in individual research laboratories and often centralized in core facilities. However, although quantitative microscopy is becoming a customary tool in research, it is rarely standardized. To achieve accurate quantitative microscopy data and reproducible results, three levels of standardization must be considered: (1) aspects of the microscope, (2) the sample, and (3) the detector. The accuracy of the data is only as reliable as the imaging system itself, thereby imposing the need for routine standard performance testing. Depending on the task some maintenance procedures should be performed once a month, some before each imaging session, while others conducted annually. This text should be implemented as a resource for researchers to integrate with their own standard operating procedures to ensure the highest quality quantitative microscopy data. Copyright © 2017. Published by Elsevier Ltd.

Harmonization of standards for parabolic trough collector testing in solar thermal power plants

NASA Astrophysics Data System (ADS)

Sallaberry, Fabienne; Valenzuela, Loreto; Palacin, Luis G.; Leon, Javier; Fischer, Stephan; Bohren, Andreas

2017-06-01

The technology of parabolic trough collectors (PTC) is used widely in concentrating Solar Power (CSP) plants worldwide. However this type of large-size collectors cannot be officially tested by an accredited laboratory and certified by an accredited certification body so far, as there is no standard adapted to its particularity, and the current published standard for solar thermal collectors are not completely applicable to them. Recently some standardization committees have been working on this technology. This paper aims to give a summary of the standardized testing methodology of large-size PTC for CSP plants, giving the physical model chosen for modeling the thermal performance of the collector in the new revision of standard ISO 9806 and the points still to be improved in the standard draft IEC 62862-3-2. In this paper, a summary of the testing validation performed on one parabolic trough collector installed in one of the test facilities at the Plataforma Solar de Almería (PSA) with this new model is also presented.

Breast imaging. A practical look at its capabilities and its limitations.

PubMed

Clark, R; Nemec, L; Love, N

1992-10-01

The film-screen technique is evolving as the standard for mammography. Sonography is the only other method that currently has a defined role in breast imaging. Mammography should be performed at facilities that have received American College of Radiology accreditation or its equivalent, because technical quality assurance is an important part of mammographic practice. Interpretive quality may be assured by outcome audits performed by mammography facilities. Primary care physicians are best suited to encouraging eligible women to undergo screening studies and should consider these recommendations: Refer patients for screening mammography to accredited facilities according to established guidelines. Educate patients about the need for regular screening. Provide annual breast physical examination. Refresh your knowledge on breast health and the techniques of physical examination if necessary. Teach patients breast self-examination techniques. Demand low-cost, high-quality screening mammography; be aware of local variability of charges and quality.

Design and Construction of a Hydroturbine Test Facility

NASA Astrophysics Data System (ADS)

Ayli, Ece; Kavurmaci, Berat; Cetinturk, Huseyin; Kaplan, Alper; Celebioglu, Kutay; Aradag, Selin; Tascioglu, Yigit; ETU Hydro Research Center Team

2014-11-01

Hydropower is one of the clean, renewable, flexible and efficient energy resources. Most of the developing countries invest on this cost-effective energy source. Hydroturbines for hydroelectric power plants are tailor-made. Each turbine is designed and constructed according to the properties, namely the head and flow rate values of the specific water source. Therefore, a center (ETU Hydro-Center for Hydro Energy Research) for the design, manufacturing and performance tests of hydraulic turbines is established at TOBB University of Economics and Technology to promote research in this area. CFD aided hydraulic and structural design, geometry optimization, manufacturing and performance tests of hydraulic turbines are the areas of expertise of this center. In this paper, technical details of the design and construction of this one of a kind test facility in Turkey, is explained. All the necessary standards of IEC (International Electrotechnical Commission) are met since the test facility will act as a certificated test center for hydraulic turbines.

28 CFR 115.231 - Employee training.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STANDARDS Standards for Community Confinement Facilities Training and Education § 115.231 Employee training... reassigned from a facility that houses only male residents to a facility that houses only female residents...

28 CFR 115.231 - Employee training.

Code of Federal Regulations, 2014 CFR

2014-07-01

... STANDARDS Standards for Community Confinement Facilities Training and Education § 115.231 Employee training... reassigned from a facility that houses only male residents to a facility that houses only female residents...

28 CFR 115.231 - Employee training.

Code of Federal Regulations, 2012 CFR

2012-07-01

... STANDARDS Standards for Community Confinement Facilities Training and Education § 115.231 Employee training... reassigned from a facility that houses only male residents to a facility that houses only female residents...

High level waste storage tanks 242-A evaporator S/RID phase II assessment report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biebesheimer, E.

This document, the Standards/Requirements Identification Document (S/RID) Phase 2 Assessment Report for the subject facility, represents the results of a Performance Assessment to determine whether procedures containing S/RID requirements are fully implemented by field personnel in the field. It contains a summary report and three attachments; an assessment schedule, performance objectives, and assessments for selected functional areas.

NASA low-speed centrifugal compressor for fundamental research

NASA Technical Reports Server (NTRS)

Wood, J. R.; Adam, P. W.; Buggele, A. E.

1983-01-01

A new centrifugal compressor facility being built by the NASA Lewis Research Center is described; its purpose is to obtain 'benchmark' experimental data for internal flow code verification and modeling. The facility will be heavily instrumented with standard pressure and temperature probes and have provisions for flow visualization and laser Doppler velocimetry. The facility will accommodate rotational speeds to 2400 rpm and will be rated at pressures to 1.25 atm. The initial compressor stage for testing is geometrically and dynamically representative of modern high-performance stages with the exception of Mach number levels. Design exit tip speed for the initial stage is 500 ft/sec with a pressure ratio of 1.17. The rotor exit backsweep is 55 deg from radial. The facility is expected to be operational in the first half of 1985.

Implementation of Best Practices in Obesity Prevention in Child Care Facilities: The Arizona Empower Program, 2013–2015

PubMed Central

Papa, Jillian; Rodriguez, Gertrudes; Robinson, Deborah

2017-01-01

Introduction Obesity is a major health concern in every US age group. Approximately one in 4 children in Arizona’s Special Supplemental Nutrition Program for Women, Infants, and Children is overweight or obese. The Arizona Department of Health Services developed the Empower program to promote healthy environments in licensed child care facilities. The program consists of 10 standards, including one standard for each of these 5 areas: physical activity and screen time, breastfeeding, fruit juice and water, family-style meals, and staff training. The objective of this evaluation was to determine the level of implementation of these 5 Empower standards. Methods A self-assessment survey was completed from July 2013 through June 2015 by 1,850 facilities to evaluate the level of implementation of 5 Empower standards. We calculated the percentage of facilities that reported the degree to which they implemented each standard and identified common themes in comments recorded in the survey. Results All facilities reported either full or partial implementation of the 5 standards. Of 1,678 facilities, 21.7% (n = 364) reported full implementation of all standards, and 78.3% (n = 1,314) reported at least partial implementation. Staff training, which has only one component, had the highest level of implementation: 77.4% (n = 1,299) reported full implementation. Only 44.0% (n = 738) reported full implementation of the standard on a breastfeeding-friendly environment. Conclusion Arizona child care facilities have begun to implement the Empower program, but facilities will need more education, technical assistance, and support in some areas to fully implement the program. PMID:28880840

Implementation of Best Practices in Obesity Prevention in Child Care Facilities: The Arizona Empower Program, 2013-2015.

PubMed

Papa, Jillian; Agostinelli, Joan; Rodriguez, Gertrudes; Robinson, Deborah

2017-09-07

Obesity is a major health concern in every US age group. Approximately one in 4 children in Arizona's Special Supplemental Nutrition Program for Women, Infants, and Children is overweight or obese. The Arizona Department of Health Services developed the Empower program to promote healthy environments in licensed child care facilities. The program consists of 10 standards, including one standard for each of these 5 areas: physical activity and screen time, breastfeeding, fruit juice and water, family-style meals, and staff training. The objective of this evaluation was to determine the level of implementation of these 5 Empower standards. A self-assessment survey was completed from July 2013 through June 2015 by 1,850 facilities to evaluate the level of implementation of 5 Empower standards. We calculated the percentage of facilities that reported the degree to which they implemented each standard and identified common themes in comments recorded in the survey. All facilities reported either full or partial implementation of the 5 standards. Of 1,678 facilities, 21.7% (n = 364) reported full implementation of all standards, and 78.3% (n = 1,314) reported at least partial implementation. Staff training, which has only one component, had the highest level of implementation: 77.4% (n = 1,299) reported full implementation. Only 44.0% (n = 738) reported full implementation of the standard on a breastfeeding-friendly environment. Arizona child care facilities have begun to implement the Empower program, but facilities will need more education, technical assistance, and support in some areas to fully implement the program.

40 CFR 160.81 - Standard operating procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Standard operating procedures. 160.81... GOOD LABORATORY PRACTICE STANDARDS Testing Facilities Operation § 160.81 Standard operating procedures. (a) A testing facility shall have standard operating procedures in writing setting forth study...

40 CFR 160.81 - Standard operating procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Standard operating procedures. 160.81... GOOD LABORATORY PRACTICE STANDARDS Testing Facilities Operation § 160.81 Standard operating procedures. (a) A testing facility shall have standard operating procedures in writing setting forth study...

40 CFR 160.81 - Standard operating procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Standard operating procedures. 160.81... GOOD LABORATORY PRACTICE STANDARDS Testing Facilities Operation § 160.81 Standard operating procedures. (a) A testing facility shall have standard operating procedures in writing setting forth study...

40 CFR 408.275 - Standards of performance for new sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... steamed and canned oyster processing facilities which utilize air flotation treatment systems to meet the....42 pH (1) (1) English units (lb/1,000 lb of product) BOD5 67 17 TSS 56 39 Oil and grease 0.64 0.42 pH...

40 CFR 792.49 - Laboratory operation areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 32 2011-07-01 2011-07-01 false Laboratory operation areas. 792.49... CONTROL ACT (CONTINUED) GOOD LABORATORY PRACTICE STANDARDS Facilities § 792.49 Laboratory operation areas. Separate laboratory space and other space shall be provided, as needed, for the performance of the routine...

Principal's Preparation Program: Managing the Learning Environment Using ELCC Standards

ERIC Educational Resources Information Center

Tubbs, J. Eric; Heard, Michael S.; Epps, Adrian

2011-01-01

School principals need to be well prepared to manage school facilities assigned to their care. Educational leadership programs can make best use of the Educational Leadership Constituent Council (ELCC) Standards to develop a course of study to address school facility management issues. Every standard has its facility implications that lead to…

77 FR 73060 - Standard Review Plan for Review of Fuel Cycle Facility License Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-07

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0220] Standard Review Plan for Review of Fuel Cycle... 1, ``Standard Review Plan (SRP) for the Review of a License Application for a Fuel Cycle Facility... for a fuel cycle facility (NUREG-1520) provides NRC staff guidance for reviewing and evaluating the...

Landlord project multi-year program plan, fiscal year 1999, WBS 1.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dallas, M.D.

The MYWP technical baseline describes the work to be accomplished by the Project and the technical standards which govern that work. The mission of Landlord Project is to provide more maintenance replacement of general infrastructure facilities and systems to facilitate the Hanford Site cleanup mission. Also, once an infrastructure facility or system is no longer needed the Landlord Project transitions the facility to final closure/removal through excess, salvage or demolition. Landlord Project activities will be performed in an environmentally sound, safe, economical, prudent, and reliable manner. The Landlord Project consists of the following facilities systems: steam, water, liquid sanitary waste,more » electrical distribution, telecommunication, sanitary landfill, emergency services, general purpose offices, general purpose shops, general purpose warehouses, environmental supports facilities, roads, railroad, and the site land. The objectives for general infrastructure support are reflected in two specific areas, (1) Core Infrastructure Maintenance, and (2) Infrastructure Risk Mitigation.« less

Variation in the level of detail in pediatric voiding cystourethrogram reports.

PubMed

Schaeffer, Anthony J; Chow, Jeanne S; Ivanova, Anastasia; Cui, Gang; Greenfield, Saul P; Zerin, J Michael; Hoberman, Alejandro; Mathews, Ranjiv I; Mattoo, Tej K; Carpenter, Myra A; Moxey-Mims, Marva; Chesney, Russell W; Nelson, Caleb P

2017-06-01

Voiding cystourethrogram (VCUG) provides a wealth of data on urinary tract function and anatomy, but few standards exist for reporting VCUG findings. We aimed to assess variability in VCUG reports and to test our hypothesis that VCUG reports from pediatric facilities and pediatric radiologists are more complete than those performed at other facilities or by non-pediatric radiologists. We analyzed original VCUG reports from children enrolled in the Randomized Intervention for Children with Vesicoureteral Reflux (RIVUR) trial. A 23-item checklist was created and used to evaluate reporting of technical (e.g. catheter size), anatomic (e.g. vesicoureteral reflux (VUR) presence and grade, bladder shape), and functional information (e.g. bladder emptying). Radiologists were classified as pediatric or non-pediatric radiologists. Facilities were categorized as to whether they were a free-standing pediatric hospital (FSPH), a pediatric "hospital within a hospital" (PHWH), a non-pediatric hospital (NPH), or an outpatient radiology facility (ORF). Multivariate linear regression was used to analyze factors associated with the completeness of the VCUG reports (percent of items reported from the 23-item checklist). Six-hundred and two VCUGs were performed at 90 institutions. Of those, 76% were read by a pediatric radiologist, and 49% were performed at a FSPH (Table). On average, less than half of the 23 items in our standardized assessment tool were included in VCUG reports (mean 48%, SD 12). The completeness of reports varied by facility type: 51% complete at FSPH (SD 11), 50% at PHWH (SD 10), 36% at NPH (SD 11), and 43% at ORF (SD 8) (p < 0.0001). In multivariate analysis, VCUG reports generated at NPH or ORF had 8% fewer items included (95% CI 3.0-12.8, p < 0.01), and those generated at PHWH did not differ from those generated at FSPH. Reports read by a non-pediatric radiologist had 6% fewer items included (95% CI 3-9.7; p < 0.01) compared with those read by a pediatric radiologist. There is substantial underreporting of findings in VCUG reports when assessing a widely represented sample of routine, community-generated reports using an idealized standard. Although VUR was often reported, other crucial anatomic and functional findings of the VCUG were consistently underreported across all facility types. Although pediatric radiologist and pediatric hospitals generated more complete VCUG reports compared with those having non-pediatric origins, the differences are small when considering the substantial underreporting of VCUG findings in general. This underscores the opportunities for improvement in reporting of VCUG findings. Copyright © 2016. Published by Elsevier Ltd.

ISO/IEC's image interchange facility

NASA Astrophysics Data System (ADS)

Blum, Christof; Hofmann, Georg R.

1992-04-01

This paper gives a technical description of the Image Interchange Facility (IIF), which comprises both a formate definition and a functional gateway specification. IIF is a part of the first International Image Processing and Interchange Standard (IPI), which is under elaboration by ISO/IEC JTC1/SC24. This paper reflects the related committee work performed up until January 1992. Considering the deficiencies and drawbacks of existing formats and current practices in exchanging digital images, the need for a new and more general approach to image interchange can be seen. This paper describes the requirements and design principles of the IIF data format and the IIF gateway. Furthermore, it explains the relation to the reference model for open communication (OSI) as well as the relation to the other parts of the IPI standard.

MAN-004 Design Standards Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Timothy L.

2014-07-01

At Sandia National Laboratories in New Mexico (SNL/NM), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/NM applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. Themore » safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule. These design standards generally apply to all disciplines on all SNL/NM projects. Architectural and engineering design must be both functional and cost-effective. Facility design must be tailored to fit its intended function, while emphasizing low-maintenance, energy-efficient, and energy-conscious design. Design facilities that can be maintained easily, with readily accessible equipment areas, low maintenance, and quality systems. To promote an orderly and efficient appearance, architectural features of new facilities must complement and enhance the existing architecture at the site. As an Architectural and Engineering (A/E) professional, you must advise the Project Manager when this approach is prohibitively expensive. You are encouraged to use professional judgment and ingenuity to produce a coordinated interdisciplinary design that is cost-effective, easily contractible or buildable, high-performing, aesthetically pleasing, and compliant with applicable building codes. Close coordination and development of civil, landscape, structural, architectural, fire protection, mechanical, electrical, telecommunications, and security features is expected to ensure compatibility with planned functional equipment and to facilitate constructability. If portions of the design are subcontracted to specialists, delivery of the finished design documents must not be considered complete until the subcontracted portions are also submitted for review. You must, along with support consultants, perform functional analyses and programming in developing design solutions. These solutions must reflect coordination of the competing functional, budgetary, and physical requirements for the project. During design phases, meetings between you and the SNL/NM Project Team to discuss and resolve design issues are required. These meetings are a normal part of the design process. For specific design-review requirements, see the project-specific Design Criteria. In addition to the design requirements described in this manual, instructive information is provided to explain the sustainable building practice goals for design, construction, operation, and maintenance of SNL/NM facilities. Please notify SNL/NM personnel of design best practices not included in this manual, so they can be incorporated in future updates.« less

Aero-thermal Calibration of the NASA Glenn Icing Research Tunnel (2000 Tests)

NASA Technical Reports Server (NTRS)

Gonsalez, Jose C.; Arrington, E. Allen; Curry, Monroe R., III

2001-01-01

Aerothermal calibration measurements and flow quality surveys were made in the test section of the Icing Research Tunnel at the NASA Glenn Research Center. These surveys were made following major facility modifications including widening of the heat exchanger tunnel section, replacement of the heat exchanger, installation of new turning vanes, and installation of new fan exit guide vanes. Standard practice at NASA Glenn requires that test section calibration and flow quality surveys be performed following such major facility modifications. A single horizontally oriented rake was used to survey the flow field at several vertical positions within a single cross-sectional plane of the test section. These surveys provided a detailed mapping of the total and static pressure, total temperature, Mach number, velocity, flow angle and turbulence intensity. Data were acquired over the entire velocity and total temperature range of the facility. No icing conditions were tested; however, the effects of air sprayed through the water injecting spray bars were assessed. All data indicate good flow quality. Mach number standard deviations were less than 0.0017, flow angle standard deviations were between 0.3 deg and 0.8 deg, total temperature standard deviations were between 0.5 and 1.8 F for subfreezing conditions, axial turbulence intensities varied between 0.3 and 1.0 percent, and transverse turbulence intensities varied between 0.3 and 1.5 percent. Measurement uncertainties were also quantified.

Design and evaluation guidelines for Department of Energy facilities subjected to natural phenomena hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kennedy, R.P.; Short, S.A.; McDonald, J.R.

1990-06-01

The Department of Energy (DOE) and the DOE Natural Phenomena Hazards Panel have developed uniform design and evaluation guidelines for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of the guidelines is to assure that DOE facilities can withstand the effects of natural phenomena such as earthquakes, extreme winds, tornadoes, and flooding. The guidelines apply to both new facilities (design) and existing facilities (evaluation, modification, and upgrading). The intended audience is primarily the civil/structural or mechanical engineers conducting the design or evaluation of DOE facilities. The likelihood of occurrence of natural phenomena hazards atmore » each DOE site has been evaluated by the DOE Natural Phenomena Hazard Program. Probabilistic hazard models are available for earthquake, extreme wind/tornado, and flood. Alternatively, site organizations are encouraged to develop site-specific hazard models utilizing the most recent information and techniques available. In this document, performance goals and natural hazard levels are expressed in probabilistic terms, and design and evaluation procedures are presented in deterministic terms. Design/evaluation procedures conform closely to common standard practices so that the procedures will be easily understood by most engineers. Performance goals are expressed in terms of structure or equipment damage to the extent that: (1) the facility cannot function; (2) the facility would need to be replaced; or (3) personnel are endangered. 82 refs., 12 figs., 18 tabs.« less

Assessment of the nursing skill mix in Mozambique using a task analysis methodology

PubMed Central

2014-01-01

Background The density of the nursing and maternal child health nursing workforce in Mozambique (0.32/1000) is well below the WHO minimum standard of 1 nurse per 1000. Two levels of education were being offered for both nurses and maternal child health nurses, in programmes ranging from 18 to 30 months in length. The health care workforce in Mozambique also includes Medical Technicians and Medical Agents, who are also educated at either basic or mid-level. The Ministry of Health determined the need to document the tasks that each of the six cadres was performing within various health facilities to identify gaps, and duplications, in order to identify strategies for streamlining workforce production, while retaining highest educational and competency standards. The methodology of task analysis (TA) was used to achieve this objective. This article provides information about the TA methodology, and selected outcomes of the very broad study. Methods A cross-sectional descriptive task analysis survey was conducted over a 15 month period (2008–2009). A stratified sample of 1295 individuals was recruited from every type of health facility in all of Mozambique’s 10 provinces and in Maputo City. Respondents indicated how frequently they performed any of 233 patient care tasks. Data analysis focused on identifying areas where identical tasks were performed by the various cadres. Analyses addressed frequency of performance, grouped by level of educational preparation, within various types of health facilities. Results Task sharing ranged from 74% to 88% between basic and general nurse cadres and from 54% to 88% between maternal and child health nurse cadres, within various health facility types. Conversely, there was distinction between scope of practice for nursing and maternal/child health nursing cadres. Conclusion The educational pathways to general nursing and maternal/child health nursing careers were consolidated into one 24 month programme for each career. The scopes of practice were affirmed based on task analysis survey data. PMID:24460789

14 CFR 171.305 - Requests for IFR procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... maintenance manual that meets the requirements of § 171.325. (4) A statement of intent to meet the... reliability and an acceptable standard of performance. Previous equivalent operational experience with a... results, and of any required changes in the MLS facility or in the maintenance manual or maintenance...

14 CFR 171.43 - Requests for IFR procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... organization and a maintenance manual that meets the requirements of § 171.51. (4) A statement of intent to... operational reliability and an acceptable standard of performance. Previous equivalent operational experience... owner of the results and of any required changes in the facility or the maintenance manual or...

10 CFR 50.55a - Codes and standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... specified in § 50.55, except that each combined license for a boiling or pressurized water-cooled nuclear... boiling or pressurized water-cooled nuclear power facility is subject to the conditions in paragraphs (f... performed. (2) Systems and components of boiling and pressurized water-cooled nuclear power reactors must...

Assessing the Performance of Military Treatment Facilities

DTIC Science & Technology

2011-01-01

NUMBER OF PAGES 140 19a. NAME OF RESPONSIBLE PERSON a. REPORT unclassified b. ABSTRACT unclassified c . THIS PAGE unclassified Standard Form...Benchmark Analysis of MTF Outcomes . . . . . . . . 73 C . Outpatient utilization and MTF Size...and FY 2006, Mean by MTF Size Quintile . . . . . . . . . . . . . . . . . . . . . 99 C .1. Regression of Outpatient Utilization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palanisamy, Giri

The U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) Climate Research Facility performs routine in situ and remote-sensing observations to provide a detailed and accurate description of the Earth atmosphere in diverse climate regimes. The result is a huge archive of diverse data sets containing observational and derived data, currently accumulating at a rate of 30 terabytes (TB) of data and 150,000 different files per month (http://www.archive.arm.gov/stats/). Continuing the current processing while scaling this to even larger sizes is extremely important to the ARM Facility and requires consistent metadata and data standards. The standards described in this document willmore » enable development of automated analysis and discovery tools for the ever growing data volumes. It will enable consistent analysis of the multiyear data, allow for development of automated monitoring and data health status tools, and allow future capabilities of delivering data on demand that can be tailored explicitly for the user needs. This analysis ability will only be possible if the data follows a minimum set of standards. This document proposes a hierarchy of required and recommended standards.« less

Investigation of a Space Delta Technology Facility (SDTF) for Spacelab

NASA Technical Reports Server (NTRS)

Welch, J. D.

1977-01-01

The Space Data Technology Facility (SDTF) would have the role of supporting a wide range of data technology related demonstrations which might be performed on Spacelab. The SDTF design is incorporated primarily in one single width standardized Spacelab rack. It consists of various display, control and data handling components together with interfaces with the demonstration-specific equipment and Spacelab. To arrive at this design a wide range of data related technologies and potential demonstrations were also investigated. One demonstration concerned with online image rectification and registration was developed in some depth.

Initial outcomes from federally mandated accreditation site surveys of advanced diagnostic imaging facilities performed by the ACR.

PubMed

Harvey, H Benjamin; Chow, David; Boston, Marion; Zhao, Jing; Lucey, Leonard; Monticciolo, Debra L

2014-07-01

The aim of this study was to evaluate the findings of the first year of validation site surveys performed by the ACR pursuant to new federal accreditation requirements for nonhospital advanced diagnostic imaging (ADI) facilities. In the first year of validation site surveys (November 2012 to November 2013), the ACR surveyed 943 ADI facilities across 21 states. Data were extracted from these site survey reports and analyzed on the basis of the survey outcomes and the frequency and type of deficiencies and recommendations. Follow-up data were obtained from the ACR for facilities deemed noncompliant on the site survey to determine if these facilities adequately took the corrective actions necessary to maintain accreditation. Of the 943 ADI facilities surveyed, 45% (n = 421) were deemed compliant with the ACR accreditation standards, and 55% (n = 522) had one or more deficiencies. Failure to produce the required personnel documentation and absence of mandatory written policies were the two most common causes of deficiencies. Facilities accredited in more modalities tended to fare better in the site surveys, with the number of accredited modalities at a facility negatively associated with the likelihood of a deficiency (P = .007). Of the facilities with deficiencies, 73% (n = 382) took the necessary corrective actions to maintain accreditation, 27% (n = 140) were in the process of taking corrective actions, and no facility has lost accreditation because of an inability to adequately address the deficiencies. Nonbinding recommendations were made to 37% (n = 346) of facilities, and facilities with deficiencies were statistically more likely to receive recommendations (P < .001). Initial site surveys of ADI facilities demonstrated a high proportion of deficient facilities, but no facility has lost accreditation because of an inability to correct these deficiencies. Knowledge of the most common sources of deficiencies and recommendations can assist ACR-accredited ADI facilities in better preparing for validation site surveys, reducing the likelihood of facility noncompliance. Copyright © 2014. Published by Elsevier Inc.

Hanford Facility Dangerous Waste Closure Plan - Plutonium Finishing Plant Treatment Unit Glovebox HA-20MB

DOE Office of Scientific and Technical Information (OSTI.GOV)

PRIGNANO, A.L.

2003-06-25

This closure plan describes the planned activities and performance standards for closing the Plutonium Finishing Plant (PFP) glovebox HA-20MB that housed an interim status ''Resource Conservation and Recovery Act'' (RCRA) of 1976 treatment unit. This closure plan is certified and submitted to Ecology for incorporation into the Hanford Facility RCRA Permit (HF RCRA Permit) in accordance with Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement; TPA) Milestone M-83-30 requiring submittal of a certified closure plan for ''glovebox HA-20MB'' by July 31, 2003. Glovebox HA-20MB is located within the 231-5Z Building in the 200 West Area of the Hanford Facility.more » Currently glovebox HA-20MB is being used for non-RCRA analytical purposes. The schedule of closure activities under this plan supports completion of TPA Milestone M-83-44 to deactivate and prepare for dismantlement the above grade portions of the 234-5Z and ZA, 243-Z, and 291-Z and 291-Z-1 stack buildings by September 30, 2015. Under this closure plan, glovebox HA-20MB will undergo clean closure to the performance standards of Washington Administrative Code (WAC) 173-303-610 with respect to all dangerous waste contamination from glovebox HA-20MB RCRA operations. Because the intention is to clean close the PFP treatment unit, postclosure activities are not applicable to this closure plan. To clean close the unit, it will be demonstrated that dangerous waste has not been left at levels above the closure performance standard for removal and decontamination. If it is determined that clean closure is not possible or is environmentally impractical, the closure plan will be modified to address required postclosure activities. Because dangerous waste does not include source, special nuclear, and by-product material components of mixed waste, radionuclides are not within the scope of this documentation. Any information on radionuclides is provided only for general knowledge. Clearance form only sent to RHA.« less

76 FR 80314 - National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Prepared...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... operating instructions, if available, or standard operating procedures must be developed by the facility... operating instructions, if available, or standard operating procedures must be developed by the facility... standard operating procedures developed by the prepared feeds manufacturer be required as part of the...

41 CFR 102-74.355 - With what accident and fire prevention standards must Federal facilities comply?

Code of Federal Regulations, 2010 CFR

2010-07-01

... MANAGEMENT REGULATION REAL PROPERTY 74-FACILITY MANAGEMENT Facility Management Accident and Fire Prevention... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false With what accident and fire prevention standards must Federal facilities comply? 102-74.355 Section 102-74.355 Public...

Skin and surface lead contamination, hygiene programs, and work practices of bridge surface preparation and painting contractors.

PubMed

Virji, M Abbas; Woskie, Susan R; Pepper, Lewis D

2009-02-01

A 2005 regulatory review of the lead in construction standard by the Occupational Safety and Health Administration (OSHA) noted that alternative pathways of exposure can be as significant as inhalation exposure and that noncompliance with the standard pertaining to hygiene facilities and practices was the second most commonly violated section of the standard. Noncompliance with provisions of the standard and unhealthy work and hygiene practices likely increase the likelihood of take-home lead via contaminated clothing, automobiles, and skin, thus contributing to elevated blood lead levels (BLL) among construction workers and their family members. We performed a cross-sectional study of bridge painters working for small contractors in Massachusetts to investigate causes of persistent elevated BLLs and to assess lead exposures. Thirteen work sites were evaluated for a 2-week period during which surface and skin wipe samples were collected and qualitative information was obtained on personal hygiene practices, decontamination and hand wash facilities, and respiratory protection programs. Results showed lead contamination on workers' skin, respirators, personal automobiles, and the decontamination unit, indicating a significant potential for take-home lead exposure. Overall, the geometric mean (GM) skin lead levels ranged from 373 microg on workers' faces at end of shift to 814 microg on hands at break time. The overall GM lead level inside respirators was 143 microg before work and 286 microg after work. Lead contamination was also present inside workers' personal vehicles as well as on surfaces inside the clean side of the decontamination unit. Review of the respiratory protection programs, work site decontamination and hand wash facilities, and personal hygiene practices indicated that these factors had significant impact on skin and surface contamination levels and identified significant opportunities for improving work site facilities and personal practices. Elevated lead exposure and BLL can be minimized by strict adherence to the OSHA provisions for functioning decontamination and hygiene facilities and healthy personal hygiene practices.

Evaluation of prototype air/fluid separator for Space Station Freedom Health Maintenance Facility

NASA Technical Reports Server (NTRS)

Billica, Roger; Smith, Maureen; Murphy, Linda; Kizzee, Victor D.

1991-01-01

A prototype air/fluid separator suction apparatus proposed as a possible design for use with the Health Maintenance Facility aboard Space Station Freedom (SSF) was evaluated. A KC-135 parabolic flight test was performed for this purpose. The flights followed the standard 40 parabola profile with 20 to 25 seconds of near-zero gravity in each parabola. A protocol was prepared to evaluate the prototype device in several regulator modes (or suction force), using three fluids of varying viscosity, and using either continuous or intermittent suction. It was felt that a matrixed approach would best approximate the range of utilization anticipated for medical suction on SSF. The protocols were performed in one-gravity in a lab setting to familiarize the team with procedures and techniques. Identical steps were performed aboard the KC-135 during parabolic flight.

ASME Nuclear Crane Standards for Enhanced Crane Safety and Increased Profit

NASA Astrophysics Data System (ADS)

Parkhurst, Stephen N.

2000-01-01

The ASME NOG-1 standard, 'Rules for Construction of Overhead and Gantry Cranes', covers top running cranes for nuclear facilities; with the ASME NUM-1 standard, 'Rules for Construction of Cranes, Monorails, and Hoists', covering the single girder, underhung, wall and jib cranes, as well as the monorails and hoists. These two ASME nuclear crane standards provide criteria for designing, inspecting and testing overhead handling equipment with enhanced safety to meet the 'defense-in-depth' approach of the United States Nuclear Regulatory Commission (USNRC) documents NUREG 0554 and NUREG 0612. In addition to providing designs for enhanced safety, the ASME nuclear crane standards provide a basis for purchasing overhead handling equipment with standard safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities. The ASME NOG-1 and ASME NUM-1 standards not only provide enhanced safety for handling a critical load, but also increase profit by minimizing the possibility of load drops, by reducing cumbersome operating restrictions, and by providing the foundation for a sound licensing position. The ASME nuclear crane standards can also increase profit by providing the designs and information to help ensure that the right standard equipment is purchased. Additionally, the ASME nuclear crane standards can increase profit by providing designs and information to help address current issues, such as the qualification of nuclear plant cranes for making 'planned engineered lifts' for steam generator replacement and decommissioning.

76 FR 48857 - Agency Information Collection Activities; Proposed Collection; Comment Request; Standardized...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... Collection Request (ICR) concerning the standardized permit for RCRA hazardous waste management facilities... Business or other for-profit. Title: Standardized Permit for RCRA Hazardous Waste Management Facilities ICR... Activities; Proposed Collection; Comment Request; Standardized Permit for RCRA Hazardous Waste Management...

40 CFR 265.18 - Location standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Location standards. 265.18 Section 265.18 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED... FACILITIES General Facility Standards § 265.18 Location standards. The placement of any hazardous waste in a...

40 CFR 271.12 - Requirements for hazardous waste management facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and 266. These standards shall include: (a) Technical standards for tanks, containers, waste piles...-closure monitoring and maintenance; (e) Groundwater monitoring; (f) Security to prevent unauthorized access to the facility; (g) Facility personnel training; (h) Inspections, monitoring, recordkeeping, and...

40 CFR 271.12 - Requirements for hazardous waste management facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and 266. These standards shall include: (a) Technical standards for tanks, containers, waste piles...-closure monitoring and maintenance; (e) Groundwater monitoring; (f) Security to prevent unauthorized access to the facility; (g) Facility personnel training; (h) Inspections, monitoring, recordkeeping, and...

40 CFR 271.12 - Requirements for hazardous waste management facilities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and 266. These standards shall include: (a) Technical standards for tanks, containers, waste piles...-closure monitoring and maintenance; (e) Groundwater monitoring; (f) Security to prevent unauthorized access to the facility; (g) Facility personnel training; (h) Inspections, monitoring, recordkeeping, and...

40 CFR 271.12 - Requirements for hazardous waste management facilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and 266. These standards shall include: (a) Technical standards for tanks, containers, waste piles...-closure monitoring and maintenance; (e) Groundwater monitoring; (f) Security to prevent unauthorized access to the facility; (g) Facility personnel training; (h) Inspections, monitoring, recordkeeping, and...

40 CFR 271.12 - Requirements for hazardous waste management facilities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and 266. These standards shall include: (a) Technical standards for tanks, containers, waste piles...-closure monitoring and maintenance; (e) Groundwater monitoring; (f) Security to prevent unauthorized access to the facility; (g) Facility personnel training; (h) Inspections, monitoring, recordkeeping, and...

Need low-cost networking? Consider DeviceNet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moss, W.H.

1996-11-01

The drive to reduce production costs and optimize system performance in manufacturing facilities causes many end users to invest in network solutions. Because of distinct differences between the way tasks are performed and the way data are handled for various applications, it is clear than more than one network will be needed in most facilities. What is not clear is which network is most appropriate for a given application. The information layer is the link between automation and information environments via management information systems (MISs) and manufacturing execution systems (MESs) and manufacturing execution systems (MESs). Here the market has chosenmore » a de facto standard in Ethernet, primarily transmission control protocol/internet protocol (TCP/IP) and secondarily manufacturing messaging system (MMS). There is no single standard at the device layer. However, the DeviceNet communication standard has made strides to reach this goal. This protocol eliminates expensive hardwiring and provides improved communication between devices and important device-level diagnostics not easily accessible or available through hardwired I/O interfaces. DeviceNet is a low-cost communications link connecting industrial devices to a network. Many original equipment manufacturers and end users have chosen the DeviceNet platform for several reasons, but most frequently because of four key features: interchangeability; low cost; advanced diagnostics; insert devices under power.« less

Building Accountability in California: A Review of State Standards and Requirements for K-12 Public School Facility Planning and Design

ERIC Educational Resources Information Center

Vincent, Jeffrey M.

2016-01-01

This study aims to inform the California Department of Education (CDE) in ensuring the standards contained in Title 5 appropriately promote the planning and design of healthy, safe and educationally suitable K-12 school facilities. The study gathers and analyzes K-12 facility standards in ten case study states across the country to understand…

Building Accountability: A Review of State Standards and Requirements for K-12 Public School Facility Planning and Design. Appendices

ERIC Educational Resources Information Center

Vincent, Jeffrey M.

2016-01-01

The purpose of this study was to inform the California Department of Education (CDE) in ensuring the standards contained in Title 5 appropriately promote the planning and design of healthy, safe and educationally suitable K-12 school facilities. The study gathers and analyzes K-12 facility standards in other states across the country to understand…

21 CFR 900.21 - Application for approval as a certification agency.

Code of Federal Regulations, 2010 CFR

2010-04-01

... description of the mammography quality standards the applicant will require facilities to meet and, for those... certification standards the applicant will require facilities to meet are the quality standards published under... SERVICES (CONTINUED) MAMMOGRAPHY QUALITY STANDARDS ACT MAMMOGRAPHY States as Certifiers § 900.21...

10 CFR 170.21 - Schedule of fees for production and utilization facilities, review of standard referenced design...

Code of Federal Regulations, 2010 CFR

2010-01-01

..., review of standard referenced design approvals, special projects, inspections and import and export... standard referenced design approvals, special projects, inspections and import and export licenses..., approvals of facility standard reference designs, re-qualification and replacement examinations for reactor...

10 CFR 170.21 - Schedule of fees for production and utilization facilities, review of standard referenced design...

Code of Federal Regulations, 2014 CFR

2014-01-01

..., review of standard referenced design approvals, special projects, inspections and import and export... standard referenced design approvals, special projects, inspections and import and export licenses..., approvals of facility standard reference designs, re-qualification and replacement examinations for reactor...

10 CFR 170.21 - Schedule of fees for production and utilization facilities, review of standard referenced design...

Code of Federal Regulations, 2013 CFR

2013-01-01

..., review of standard referenced design approvals, special projects, inspections and import and export... standard referenced design approvals, special projects, inspections and import and export licenses..., approvals of facility standard reference designs, re-qualification and replacement examinations for reactor...

10 CFR 170.21 - Schedule of fees for production and utilization facilities, review of standard referenced design...

Code of Federal Regulations, 2011 CFR

2011-01-01

..., review of standard referenced design approvals, special projects, inspections and import and export... standard referenced design approvals, special projects, inspections and import and export licenses..., approvals of facility standard reference designs, re-qualification and replacement examinations for reactor...

3718-F Alkali Metal Treatment and Storage Facility Closure Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Since 1987, Westinghouse Hanford Company has been a major contractor to the U.S. Department of Energy-Richland Operations Office and has served as co-operator of the 3718-F Alkali Metal Treatment and Storage Facility, the waste management unit addressed in this closure plan. The closure plan consists of a Part A Dangerous waste Permit Application and a RCRA Closure Plan. An explanation of the Part A Revision (Revision 1) submitted with this document is provided at the beginning of the Part A section. The closure plan consists of 9 chapters and 5 appendices. The chapters cover: introduction; facility description; process information; wastemore » characteristics; groundwater; closure strategy and performance standards; closure activities; postclosure; and references.« less

NASA Low-Speed Centrifugal Compressor for Fundamental Research

NASA Technical Reports Server (NTRS)

Wood, J. R.; Adam, P. W.; Buggele, A. E.

1983-01-01

A centrifugal compressor facility being built by the NASA Lewis Research Center is described; its purpose is to obtain benchmark experimental data for internal flow code verification and modeling. The facility will be heavily instrumented with standard pressure and temperature probes and have provisions for flow visualization and laser Doppler velocimetry. The facility will accommodate rotational speeds to 2400 rpm and will be rated at pressures to 1.25 atm. The initial compressor stage for testing is geometrically and dynamically representative of modern high-performance stages with the exception of Mach number levels. Design exit tip speed for the initial stage is 500 ft/sec with a pressure ratio of 1.17. The rotor exit backsweep is 55 deg from radial.

Data-Acquisition System With Remotely Adjustable Amplifiers

NASA Technical Reports Server (NTRS)

Nurge, Mark A.; Larson, William E.; Hallberg, Carl G.; Thayer, Steven W.; Ake, Jeffrey C.; Gleman, Stuart M.; Thompson, David L.; Medelius, Pedro J.; Crawford, Wayne A.; Vangilder, Richard M.;

14 CFR Appendix E to Part 60 - Qualification Performance Standards for Quality Management Systems for Flight Simulation Training...

Code of Federal Regulations, 2011 CFR

2011-01-01

... conducted more frequently if warranted. End QPS Requirements Begin Information g. An example of a segment..., scheduling and conducting tests or inspections, functional preflight checks) but retain the responsibility... following: (a) A maintenance facility that provides suitable FSTD hardware and software tests and...

14 CFR Appendix E to Part 60 - Qualification Performance Standards for Quality Management Systems for Flight Simulation Training...

Code of Federal Regulations, 2013 CFR

2013-01-01

... conducted more frequently if warranted. End QPS Requirements Begin Information g. An example of a segment..., scheduling and conducting tests or inspections, functional preflight checks) but retain the responsibility... following: (a) A maintenance facility that provides suitable FSTD hardware and software tests and...

Building Awards | NREL

Science.gov Websites

Mountain campus is designed to meet the Gold or Platinum standards of the U.S. Green Building Council's Research Facility. South Site Entrance Building South Site Entrance Building 2013 U.S. Green Buildings Building Awards Building Awards NREL's high-performance buildings are sustainability models for the

The VERITAS Facility: A Virtual Environment Platform for Human Performance Research

DTIC Science & Technology

2016-01-01

IAE The IAE supports the audio environment that users experience during the course of an experiment. This includes environmental sounds, user-to...future, we are looking towards a database-based system that would use MySQL or an equivalent product to store the large data sets and provide standard

43 CFR 3809.420 - What performance standards apply to my notice or plan of operations?

Code of Federal Regulations, 2013 CFR

2013-10-01

... or facility maintenance after project closure. Long-term, or post-mining, effluent capture and... the Resource Conservation and Recovery Act (42 U.S.C. 6901 et seq.). All garbage, refuse or waste... design. (iv) You must construct a secondary containment system around vats, tanks, or recovery circuits...

43 CFR 3809.420 - What performance standards apply to my notice or plan of operations?

Code of Federal Regulations, 2012 CFR

2012-10-01

... or facility maintenance after project closure. Long-term, or post-mining, effluent capture and... the Resource Conservation and Recovery Act (42 U.S.C. 6901 et seq.). All garbage, refuse or waste... design. (iv) You must construct a secondary containment system around vats, tanks, or recovery circuits...

40 CFR 60.5415 - How do I demonstrate continuous compliance with the standards for my gas well affected facility...

Code of Federal Regulations, 2014 CFR

2014-07-01

... plants? 60.5415 Section 60.5415 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... used to reduce emissions, you must demonstrate continuous compliance with the performance requirements... sudden, infrequent, and unavoidable failure of air pollution control equipment, process equipment, or a...

78 FR 23327 - Issuance of a Presidential Permit Authorizing the State of Michigan to Construct, Connect...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-18

...) The construction, operation and maintenance of the United States facilities shall be in all material... ``Application''). Article 2. (1) The standards for, and the manner of, the construction, operation, and... performance of their official duties. (2) Prior to initiation of construction, the permittee shall obtain the...

75 FR 72719 - Approval and Promulgation of Implementation Plans; Idaho

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

..., provisions relating to Tier 1 operating permits, facility emissions cap, standards of performance of certain... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R10-OAR-2008-0482; FRL-9231-1] Approval and... Requirements 7/1/2002 for Tier II Operating Permits. 401 Tier II Operating Permit...... 4/6/2005 Except 401.01...

40 CFR Table 1 to Subpart Cb of... - Nitrogen Oxides Guidelines for Designated Facilities

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions... (parts per million by volume) a Mass burn waterwall 205 205. Mass burn rotary waterwall 250 210. Refuse-derived fuel combustor 250 250. Fluidized bed combustor 180 180. Mass burn refractory combustors No limit...

40 CFR Table 1 to Subpart Cb of... - Nitrogen Oxides Guidelines for Designated Facilities

Code of Federal Regulations, 2012 CFR

2012-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions... (parts per million by volume) a Mass burn waterwall 205 205. Mass burn rotary waterwall 250 210. Refuse-derived fuel combustor 250 250. Fluidized bed combustor 180 180. Mass burn refractory combustors No limit...

40 CFR Table 1 to Subpart Cb of... - Nitrogen Oxides Guidelines for Designated Facilities

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions... (parts per million by volume) a Mass burn waterwall 205 205. Mass burn rotary waterwall 250 210. Refuse-derived fuel combustor 250 250. Fluidized bed combustor 180 180. Mass burn refractory combustors No limit...

Refinement of Optimal Work Envelope for Extra-Vehicular Activity (EVA) Suit Operations

NASA Technical Reports Server (NTRS)

Jaramillo, Marcos A.; Angermiller, Bonnie L.; Morency, Richard M.; Rajululu, Sudhakar L.

2008-01-01

The purpose of the Extravehicular Mobility Unit (EMU) Work Envelope study is to determine and revise the work envelope defined in NSTS 07700 "System Description and Design Data - Extravehicular Activities" [1], arising from an action item as a result of the Shoulder Injury Tiger Team findings. The aim of this study is to determine a common work envelope that will encompass a majority of the crew population while minimizing the possibility of shoulder and upper arm injuries. There will be approximately two phases of testing: arm sweep analysis to be performed in the Anthropometry and Biomechanics Facility (ABF), and torso lean testing to be performed on the Precision Air Bearing Facility (PABF). NSTS 07700 defines the preferred work envelope arm reach in terms of maximum reach, and defines the preferred work envelope torso flexibility of a crewmember to be a net 45 degree backwards lean [1]. This test served two functions: to investigate the validity of the standard discussed in NSTS 07700, and to provide recommendations to update this standard if necessary.

Technology evaluation report: SITE (Superfund Innovative Technology Evaluation) program demonstration test. The American Combustion Pyretron Thermal Destruction System at the US EPA's (Environmental Protection Agency's) combustion research facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waterland, L.; Lee, J.W.

1989-04-01

A series of demonstration tests of the American Combustion, Inc., Thermal Destruction System was performed under the SITE program. This oxygen-enhanced combustion system was retrofit to the rotary-kiln incinerator at EPA's Combustion Research Facility. The system's performance was tested firing contaminated soil from the Stringfellow Superfund Site, both alone and mixed with a coal tar waste (KO87). Comparative performance with conventional incinerator operation was also tested. Compliance with the incinerator performance standards of 99.99% principal organic hazardous constituents (POHC) destruction and removal efficiency and particulate emissions of less than 180 mg/dscm at 7% O2 was measured for all tests. Themore » Pyretron system was capable of in-compliance performance at double the mixed waste feedrate and at a 60% increase in batch waste charge mass than possible with conventional incineration. Scrubber blowdown and kiln ash contained no detectable levels of any of the POHCs chosen.« less

Establishing repeatable operation of a centrifugal compressor research facility for aerodynamic investigations

NASA Astrophysics Data System (ADS)

Dolan, Matthew Philip

The objective of this research has been to analyze the steady state performance of a new centrifugal compressor research facility. The CSTAR (Centrifugal STage for Aerodynamic Research) compressor has been designed to be placed as the last stage in an axial compressor and its performance in this flow regime was measured. Because the compressor was designed as a research vehicle, unique instrumentation throughout the flow path provides a detailed look at its steady state performance. Rakes at the inlet and deswirl section quantify the overall performance but other instrumentation is used to understand the component performance. Static pressure taps along the shroud, within the diffuser, and through the turn-to-axial show the static pressure rise. Additionally, rakes at the inlet and exit of diffuser also characterize the performance of the wedge diffuser and the impeller. Additionally, capacitance probes located at the knee and exducer of the impeller non-intrusively measure the size of the tip clearance during facility operation. An investigation into these measurements resulted in a standard procedure for in-situ calibration and installation to produce repeatable and accurate clearance measurements. Finally, the feasibility of future Laser Doppler Velocimetry measurements acquired through the shroud window was tested and was found to be achievable with the use of beam translators to ensure that measurement volumes are created after beam refraction through the windows. Inlet conditions of the facility have been investigated and fluctuations of the ambient conditions have been mitigated with a large settling chamber to ensure repeatable and stable operation. The current instrumentation was utilized to determine the compressor performance. Measurements of the steady performance parameters along with those of the internal flowfield are documented.

75 FR 37825 - Notice of Proposed Information Collection: Comment Request; Minimum Property Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

... Information Collection: Comment Request; Minimum Property Standards for Multifamily and Care-Type Facilities...: Minimum Property Standards for Multifamily and Care-type facilities. OMB Control Number, if applicable... Housing and Urban Development (HUD) developed the Minimum Property Standards (MPS) program in order to...

21 CFR 58.81 - Standard operating procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Testing Facilities Operation § 58.81 Standard operating procedures. (a) A testing facility shall have standard operating procedures in writing setting... following: (1) Animal room preparation. (2) Animal care. (3) Receipt, identification, storage, handling...

21 CFR 58.81 - Standard operating procedures.

Code of Federal Regulations, 2013 CFR

2013-04-01

... LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Testing Facilities Operation § 58.81 Standard operating procedures. (a) A testing facility shall have standard operating procedures in writing setting... following: (1) Animal room preparation. (2) Animal care. (3) Receipt, identification, storage, handling...

21 CFR 58.81 - Standard operating procedures.

Code of Federal Regulations, 2012 CFR

2012-04-01

... LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Testing Facilities Operation § 58.81 Standard operating procedures. (a) A testing facility shall have standard operating procedures in writing setting... following: (1) Animal room preparation. (2) Animal care. (3) Receipt, identification, storage, handling...

21 CFR 58.81 - Standard operating procedures.

Code of Federal Regulations, 2014 CFR

2014-04-01

... LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Testing Facilities Operation § 58.81 Standard operating procedures. (a) A testing facility shall have standard operating procedures in writing setting... following: (1) Animal room preparation. (2) Animal care. (3) Receipt, identification, storage, handling...

Hazardous Waste Cleanup: American Standard Incorporated in Hamilton Township, New Jersey

EPA Pesticide Factsheets

American Standard Incorporated is located at 240 Princeton Avenue in Trenton, New Jersey. American Standard's Trenton Pottery Facility has operated at its present location since 1923. The facility manufactures ceramic plumbing fixtures using clay, plaster

Current Performance Characteristics of NASA Langley Research Center's Cockpit Motion Base and Standardized Test Procedure for Future Performance Characterization

NASA Technical Reports Server (NTRS)

Cowen, Brandon; Stringer, Mary T.; Hutchinson, Brian K.; Davidson, Paul C.; Gupton, Lawrence E.

2014-01-01

This report documents the updated performance characteristics of NASA Langley Research Center's (LaRC) Cockpit Motion Base (CMB) after recent revisions that were made to its inner-loop, feedback control law. The modifications to the control law will be briefly described. The performance of the Cockpit Motion Facility (CMF) will be presented. A short graphical comparison to the previous control law can be found in the appendix of this report. The revised controller will be shown to yield reduced parasitic accelerations with respect to the previous controller. Metrics based on the AGARD Advisory Report No. 144 are used to assess the overall system performance due to its recent control algorithm modification. This report also documents the standardized simulator test procedure which can be used in the future to evaluate potential updates to the control law.

Establishing a cGMP pancreatic islet processing facility: the first experience in Iran.

PubMed

Larijani, Bagher; Arjmand, Babak; Amoli, Mahsa M; Ao, Ziliang; Jafarian, Ali; Mahdavi-Mazdah, Mitra; Ghanaati, Hossein; Baradar-Jalili, Reza; Sharghi, Sasan; Norouzi-Javidan, Abbas; Aghayan, Hamid Reza

2012-12-01

It has been predicted that one of the greatest increase in prevalence of diabetes will happen in the Middle East bear in the next decades. The aim of standard therapeutic strategies for diabetes is better control of complications. In contrast, some new strategies like cell and gene therapy have aimed to cure the disease. In recent years, significant progress has occurred in beta-cell replacement therapies with a progressive improvement of short-term and long term outcomes. In year 2005, considering the impact of the disease in Iran and the promising results of the Edmonton protocol, the funding for establishing a current Good Manufacturing Practice (cGMP) islet processing facility by Endocrinology and Metabolism Research Center was approved by Tehran University of Medical Sciences. Several islet isolations were performed following establishment of cGMP facility and recruitment of all required equipments for process validation and experimental purpose. Finally the first successful clinical islet isolation and transplantation was performed in September 2010. In spite of a high cost of the procedure it is considered beneficial and may prevent long term complications and the costs associated with secondary cares. In this article we will briefly describe our experience in setting up a cGMP islet processing facility which can provide valuable information for regional countries interested to establish similar facilities.

42 CFR 488.301 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... requirements under § 483.13, Resident behavior and facility practices, § 483.15, Quality of life, or § 483.25... participation requirements subsequent to finding substandard quality of care during a standard survey. Facility... substandard quality of care during an abbreviated standard survey. Skilled nursing facility (SNF) means a...

42 CFR 488.301 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... requirements under § 483.13, Resident behavior and facility practices, § 483.15, Quality of life, or § 483.25... participation requirements subsequent to finding substandard quality of care during a standard survey. Facility... substandard quality of care during an abbreviated standard survey. Skilled nursing facility (SNF) means a...

42 CFR 488.301 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... requirements under § 483.13, Resident behavior and facility practices, § 483.15, Quality of life, or § 483.25... participation requirements subsequent to finding substandard quality of care during a standard survey. Facility... substandard quality of care during an abbreviated standard survey. Skilled nursing facility (SNF) means a...

42 CFR 488.301 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... requirements under § 483.13, Resident behavior and facility practices, § 483.15, Quality of life, or § 483.25... participation requirements subsequent to finding substandard quality of care during a standard survey. Facility... substandard quality of care during an abbreviated standard survey. Skilled nursing facility (SNF) means a...

42 CFR 488.301 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... requirements under § 483.13, Resident behavior and facility practices, § 483.15, Quality of life, or § 483.25... participation requirements subsequent to finding substandard quality of care during a standard survey. Facility... substandard quality of care during an abbreviated standard survey. Skilled nursing facility (SNF) means a...

Activities report of PTT Research

NASA Astrophysics Data System (ADS)

In the field of postal infrastructure research, activities were performed on postcode readers, radiolabels, and techniques of operations research and artificial intelligence. In the field of telecommunication, transportation, and information, research was made on multipurpose coding schemes, speech recognition, hypertext, a multimedia information server, security of electronic data interchange, document retrieval, improvement of the quality of user interfaces, domotics living support (techniques), and standardization of telecommunication prototcols. In the field of telecommunication infrastructure and provisions research, activities were performed on universal personal telecommunications, advanced broadband network technologies, coherent techniques, measurement of audio quality, near field facilities, local beam communication, local area networks, network security, coupling of broadband and narrowband integrated services digital networks, digital mapping, and standardization of protocols.

Mechanisms for training security inspectors to enhance human performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burkhalter, H.E.; Sessions, J.C.

The Department of Energy (DOE) has established qualification standards for protective force personnel employed at nuclear facilities (10 CFR Part 1046 (Federal Register)). Training mechanisms used at Los Alamos to enhance human performance in meeting DOE standards include, but are not limited to, the following: for cardio-respiratory training, they utilize distance running, interval training, sprint training, pacing, indoor aerobics and circuit training; for muscular strength, free weights, weight machines, light hand weights, grip strength conditioners, and calistenics are employed; for muscular endurance, participants do high repetitions (15 - 40) using dumbbells, flex weights, resistive rubber bands, benches, and calisthenics; formore » flexibility, each training session devotes specific times to stretch the muscles involved for a particular activity. These training mechanisms with specific protocols can enhance human performance.« less

Standards to prevent, detect, and respond to sexual abuse and sexual harassment involving unaccompanied children. Interim final rule (IFR).

PubMed

2014-12-24

This IFR proposes standards and procedures to prevent, detect, and respond to sexual abuse and sexual harassment involving unaccompanied children (UCs) in ORR's care provider facilities. DATES: This IFR is effective on December 24, 2014. ORR care provider facilities must be in compliance with this IFR by June 24, 2015 but encourages care provider facilities to be in compliance sooner, if possible. HHS will work with facilities to implement and enforce the standards contained in this rule. Comments on this IFR must be received on or before February 23, 2015.

76 FR 65544 - Standard Format and Content of License Applications for Mixed Oxide Fuel Fabrication Facilities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-21

...The U.S. Nuclear Regulatory Commission (NRC or Commission) is issuing a revision to regulatory guide (RG) 3.39, ``Standard Format and Content of License Applications for Mixed Oxide Fuel Fabrication Facilities.'' This guide endorses the standard format and content for license applications and integrated safety analysis (ISA) summaries described in the current version of NUREG-1718, ``Standard Review Plan for the Review of an Application for a Mixed Oxide (MOX) Fuel Fabrication Facility,'' as a method that the NRC staff finds acceptable for meeting the regulatory requirements of Title 10 of the Code of Federal Regulations (10 CFR) part 70, ``Domestic Licensing of Special Nuclear Material'' for mixed oxide fuel fabrication facilities.

Guidelines and Standards for the Technology Infrastructure of 21st Century Educational Facilities.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Office of Facilities Planning.

New York State Regents directed that new guidelines and "standards" be developed for technology infrastructures in educational facilities in order to assist administrators and educators in planning technology integration during retrofits, renovations, or new construction of educational facilities. This document provides the first draft…

Design Standards for School Art Facilities

ERIC Educational Resources Information Center

National Art Education Association, 2015

2015-01-01

"Design Standards for School Art Facilities" is an invaluable resource for any school or school district looking to build new facilities for the visual arts or renovate existing ones. Discover detailed information about spaces for the breadth of media used in the visual arts. Photographs illustrate all types of features including…

USP <800> Adds Significant Safety Standards: Facility Upgrades Needed to Protect Employees From Hazardous Drugs.

PubMed

Beans, Bruce E

2017-05-01

The new USP standard for handling hazardous drugs (HDs) will require millions of dollars in capital outlays for facility and equipment upgrades and also requires in-depth assessments of each HD that facilities handle, significant workflow and work practice changes, and thorough staff training.

Acute oral toxicity test of chemical compounds in silkworms.

PubMed

Usui, Kimihito; Nishida, Satoshi; Sugita, Takuya; Ueki, Takuro; Matsumoto, Yasuhiko; Okumura, Hidenobu; Sekimizu, Kazuhisa

2016-02-01

This study performed an acute oral toxicity test of 59 compounds in silkworms. These compounds are listed in OECD guidelines as standard substances for a cytotoxicity test, and median lethal dose (LD(50)) werecalculated for each compound. Acute oral LD(50) values in mammals are listed in OECD guidelines and acute oral LD(50) values in silkworms were determined in this study. R(2) for the correlation between LD(50) values in mammals and LD(50) values in silkworms was 0.66. In addition, the acute oral toxicity test in silkworms was performed by two different facilities, and test results from the facilities were highly reproducible. These findings suggest that an acute oral toxicity test in silkworms is a useful way to evaluate the toxicity of compounds in mammals.

Strength evaluation of prosthetic check sockets, copolymer sockets, and definitive laminated sockets.

PubMed

Gerschutz, Maria J; Haynes, Michael L; Nixon, Derek; Colvin, James M

2012-01-01

A prosthesis encounters loading through forces and torques exerted by the person with amputation. International Organization for Standardization (ISO) standard 10328 was designed to test most lower-limb prosthetic components. However, this standard does not include prosthetic sockets. We measured static failure loads of prosthetic sockets using a modified ISO 10328 and then compared them with the criteria set by this standard for other components. Check socket (CS) strengths were influenced by thickness, material choice, and fabrication method. Copolymer socket (CP) strengths depended on thickness and fabrication methods. A majority of the CSs and all of the CPs failed to pass the ISO 10328 ductile loading criterion. In contrast, the strengths of definitive laminated sockets (DLs) were influenced more by construction material and technique. A majority of the DLs failed to pass the ISO 10328 brittle loading criterion. Analyzing prosthetic sockets from a variety of facilities demonstrated that socket performance varies considerably between and within facilities. The results from this article provide a foundation for understanding the quality of prosthetic sockets, some insight into possible routes for improving the current care delivered to patients, and a comparative basis for future technology.

Search for Hidden Particles (SHiP): a new experiment proposal

NASA Astrophysics Data System (ADS)

De Lellis, G.

2015-06-01

Searches for new physics with accelerators are being performed at the LHC, looking for high massive particles coupled to matter with ordinary strength. We propose a new experimental facility meant to search for very weakly coupled particles in the few GeV mass domain. The existence of such particles, foreseen in different theoretical models beyond the Standard Model, is largely unexplored from the experimental point of view. A beam dump facility, built at CERN in the north area, using 400 GeV protons is a copious factory of charmed hadrons and could be used to probe the existence of such particles. The beam dump is also an ideal source of tau neutrinos, the less known particle in the Standard Model. In particular, tau anti-neutrinos have not been observed so far. We therefore propose an experiment to search for hidden particles and study tau neutrino physics at the same time.

75 FR 48408 - Issuance of a Presidential Permit Authorizing the Construction, Operation, and Maintenance of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-10

... of the facilities in the United States. This permit is subject to the following conditions: Article 1... State or the Secretary's delegate. Article 2. The standards for, and the manner of, the construction... performance of their official duties. Article 3. The permittee shall comply with all applicable federal, state...

Protracted Low-Dose Ionizing Radiation Effects upon Primate Performance

DTIC Science & Technology

1977-12-01

61 G. Dosimetry ................................ ............. 74 NTiS Whife Sectle ) U A N O U C E D JUSTIFICATION...AECL facility. Standard dosimetry techniques were utilized during radiation expo- sur.. In addition, extensive preexposure calibration was conducted...During each of the epochs, the five basic variables were deter- mined. These calculations were accomplished on an analog computer, Electronics Associates

75 FR 82269 - Approval and Promulgation of State Plans for Designated Facilities and Pollutants; State of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

... solid waste (MSW). DATES: This direct final rule is effective February 28, 2011 without further notice... requires EPA to conduct a 5-year review of the solid waste incinerator new source performance standards........... Okahumpka. Pasco County Solid Waste Hudson. Hillsborough County Resource Recovery Tampa. McKay Bay Refuse-to...

A Manual of Simplified Laboratory Methods for Operators of Wastewater Treatment Facilities.

ERIC Educational Resources Information Center

Westerhold, Arnold F., Ed.; Bennett, Ernest C., Ed.

This manual is designed to provide the small wastewater treatment plant operator, as well as the new or inexperienced operator, with simplified methods for laboratory analysis of water and wastewater. It is emphasized that this manual is not a replacement for standard methods but a guide for plants with insufficient equipment to perform analyses…

Federal environmental standards of potential importance to operations and activities at US Department of Energy sites. Draft

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fowler, K.M.; Bilyard, G.R.; Davidson, S.A.

1993-06-01

The US Department of Energy (DOE) is now engaged in a program of environmental restoration nationwide across its 45 sites. It is also bringing its facilities into compliance with environmental regulations, decontaminating and decommissioning unwanted facilities, and constructing new waste management facilities. One of the most difficult questions that DOE must face in successfully remediating its inactive waste sites, decontaminating and decommissioning its inactive facilities, and operating its waste management facilities is: ``What criteria and standards should be met?`` Acceptable standards or procedures for determining standards will assist DOE in its conduct of ongoing waste management and pending cleanup activitiesmore » by helping to ensure that those activities are conducted in compliance with applicable laws and regulations and are accepted by the regulatory community and the public. This document reports on the second of three baseline activities that are being conducted as prerequisites to either the development of quantitative standards that could be used by DOE, or consistent procedures for developing such standards. The first and third baseline activities are also briefly discussed in conjunction with the second of the three activities.« less

Dry Cleaning Facilities: National Perchloroethylene Air Emission Standards

EPA Pesticide Factsheets

Learn about the Maximum Achievable Control Technology (MACT) standards for dry cleaning facilities. Find the rule history information, federal register citations, legal authority, and additional resources.

Measuring the preparedness of health facilities to deliver emergency obstetric care in a South African district.

PubMed

Thwala, Siphiwe Bridget Pearl; Blaauw, Duane; Ssengooba, Freddie

2018-01-01

Improving the delivery of emergency obstetric care (EmNOC) remains critical in addressing direct causes of maternal mortality. United Nations (UN) agencies have promoted standard methods for evaluating the availability of EmNOC facilities although modifications have been proposed by others. This study presents an assessment of the preparedness of public health facilities to provide EmNOC using these methods in one South African district with a persistently high maternal mortality ratio. Data collection took place in the final quarter of 2014. Cross-sectional surveys were conducted to classify the 7 hospitals and 8 community health centres (CHCs) in the district as either basic EmNOC (BEmNOC) or comprehensive EmNOC (CEmNOC) facilities using UN EmNOC signal functions. The required density of EmNOC facilities was calculated using UN norms. We also assessed the availability of EmNOC personnel, resuscitation equipment, drugs, fluids, and protocols at each facility. The workload of skilled EmNOC providers at hospitals and CHCs was compared. All 7 hospitals in the district were classified as CEmNOC facilities, but none of the 8 CHCs performed all required signal functions to be classified as BEmNOC facilities. UN norms indicated that 25 EmNOC facilities were required for the district population, 5 of which should be CEmNOCs. None of the facilities had 100% of items on the EmNOC checklists. Hospital midwives delivered an average of 36.4±14.3 deliveries each per month compared to only 7.9±3.2 for CHC midwives (p<0.001). The analysis indicated a shortfall of EmNOC facilities in the district. Full EmNOC services were centralised to hospitals to assure patient safety even though national policy guidelines sanction more decentralisation to CHCs. Studies measuring EmNOC availability need to consider facility opening hours, capacity and staffing in addition to the demonstrated performance of signal functions.

Measuring the preparedness of health facilities to deliver emergency obstetric care in a South African district

PubMed Central

Blaauw, Duane; Ssengooba, Freddie

2018-01-01

Background Improving the delivery of emergency obstetric care (EmNOC) remains critical in addressing direct causes of maternal mortality. United Nations (UN) agencies have promoted standard methods for evaluating the availability of EmNOC facilities although modifications have been proposed by others. This study presents an assessment of the preparedness of public health facilities to provide EmNOC using these methods in one South African district with a persistently high maternal mortality ratio. Methods Data collection took place in the final quarter of 2014. Cross-sectional surveys were conducted to classify the 7 hospitals and 8 community health centres (CHCs) in the district as either basic EmNOC (BEmNOC) or comprehensive EmNOC (CEmNOC) facilities using UN EmNOC signal functions. The required density of EmNOC facilities was calculated using UN norms. We also assessed the availability of EmNOC personnel, resuscitation equipment, drugs, fluids, and protocols at each facility. The workload of skilled EmNOC providers at hospitals and CHCs was compared. Results All 7 hospitals in the district were classified as CEmNOC facilities, but none of the 8 CHCs performed all required signal functions to be classified as BEmNOC facilities. UN norms indicated that 25 EmNOC facilities were required for the district population, 5 of which should be CEmNOCs. None of the facilities had 100% of items on the EmNOC checklists. Hospital midwives delivered an average of 36.4±14.3 deliveries each per month compared to only 7.9±3.2 for CHC midwives (p<0.001). Conclusions The analysis indicated a shortfall of EmNOC facilities in the district. Full EmNOC services were centralised to hospitals to assure patient safety even though national policy guidelines sanction more decentralisation to CHCs. Studies measuring EmNOC availability need to consider facility opening hours, capacity and staffing in addition to the demonstrated performance of signal functions. PMID:29596431

Standards for Community College Library Facilities.

ERIC Educational Resources Information Center

California State Postsecondary Education Commission, Sacramento.

This report contains proposed standards for community college library facilities developed by the California Postsecondary Education Commission. Formulae for calculating stack space, staff space, reader station space, and total space are included in the report. Three alternative models for revising the present library standards were considered:…

36 CFR Appendix A to Part 1234 - Minimum Security Standards for Level III Federal Facilities

Code of Federal Regulations, 2014 CFR

2014-07-01

... technology and blast standards. Immediate review of ongoing projects may generate savings in the... critical systems (alarm systems, radio communications, computer facilities, etc.) Required. Occupant... all exterior windows (shatter protection) Recommended. Review current projects for blast standards...

36 CFR Appendix A to Part 1234 - Minimum Security Standards for Level III Federal Facilities

Code of Federal Regulations, 2013 CFR

2013-07-01

... construction projects should be reviewed if possible, to incorporate current technology and blast standards... critical systems (alarm systems, radio communications, computer facilities, etc.) Required. Occupant... all exterior windows (shatter protection) Recommended. Review current projects for blast standards...

36 CFR Appendix A to Part 1234 - Minimum Security Standards for Level III Federal Facilities

Code of Federal Regulations, 2012 CFR

2012-07-01

... technology and blast standards. Immediate review of ongoing projects may generate savings in the... critical systems (alarm systems, radio communications, computer facilities, etc.) Required. Occupant... all exterior windows (shatter protection) Recommended. Review current projects for blast standards...

Automation of electromagnetic compatability (EMC) test facilities

NASA Technical Reports Server (NTRS)

Harrison, C. A.

1986-01-01

Efforts to automate electromagnetic compatibility (EMC) test facilities at Marshall Space Flight Center are discussed. The present facility is used to accomplish a battery of nine standard tests (with limited variations) deigned to certify EMC of Shuttle payload equipment. Prior to this project, some EMC tests were partially automated, but others were performed manually. Software was developed to integrate all testing by means of a desk-top computer-controller. Near real-time data reduction and onboard graphics capabilities permit immediate assessment of test results. Provisions for disk storage of test data permit computer production of the test engineer's certification report. Software flexibility permits variation in the tests procedure, the ability to examine more closely those frequency bands which indicate compatibility problems, and the capability to incorporate additional test procedures.

The Feasibility of Establishing Operational Water Hyacinth-Based Systems at the Treatment Facilities of Existing Cities. [in Florida and Texas

NASA Technical Reports Server (NTRS)

1977-01-01

The wastewater treatment facilities of three communities in southern Florida and two in southern Texas areas having populations of 20,000 or fewer persons were surveyed to determine: (1) their performance characteristics and the nature of their customers; (2) facility upgrading requirements needed to meet current and future EPA and State standards; (3) their adaptability to water hyacinth utilization and harvested plant disposal; and (4) the level of community support. Guidelines for site selection were established and applied to five cities in Texas and four in Florida. An evaluation of the prospective sites reveals that the Florida locations are generally unsuitable for implementation of water hyacinth based systems because of regulatory philosophy. All five Texas sites have excellent potential.

Comparison of the diagnostic accuracy of a rapid immunochromatographic test and the rapid plasma reagin test for antenatal syphilis screening in Mozambique.

PubMed Central

Montoya, Pablo J.; Lukehart, Sheila A.; Brentlinger, Paula E.; Blanco, Ana J.; Floriano, Florencia; Sairosse, Josefa; Gloyd, Stephen

2006-01-01

OBJECTIVE: Programmes to control syphilis in developing countries are hampered by a lack of laboratory services, delayed diagnosis, and doubts about current screening methods. We aimed to compare the diagnostic accuracy of an immunochromatographic strip (ICS) test and the rapid plasma reagin (RPR) test with the combined gold standard (RPR, Treponema pallidum haemagglutination assay and direct immunofluorescence stain done at a reference laboratory) for the detection of syphilis in pregnancy. METHODS: We included test results from 4789 women attending their first antenatal visit at one of six health facilities in Sofala Province, central Mozambique. We compared diagnostic accuracy (sensitivity, specificity, and positive and negative predictive values) of ICS and RPR done at the health facilities and ICS performed at the reference laboratory. We also made subgroup comparisons by human immunodeficiency virus (HIV) and malaria status. FINDINGS: For active syphilis, the sensitivity of the ICS was 95.3% at the reference laboratory, and 84.1% at the health facility. The sensitivity of the RPR at the health facility was 70.7%. Specificity and positive and negative predictive values showed a similar pattern. The ICS outperformed RPR in all comparisons (P<0.001). CONCLUSION: The diagnostic accuracy of the ICS compared favourably with that of the gold standard. The use of the ICS in Mozambique and similar settings may improve the diagnosis of syphilis in health facilities, both with and without laboratories. PMID:16501726

9 CFR 3.27 - Facilities, outdoor.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.27 Facilities, outdoor. (a) Hamsters shall not be housed in outdoor facilities. (b) Guinea pigs shall not be housed in outdoor facilities unless...

9 CFR 3.27 - Facilities, outdoor.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.27 Facilities, outdoor. (a) Hamsters shall not be housed in outdoor facilities. (b) Guinea pigs shall not be housed in outdoor facilities unless...

9 CFR 3.27 - Facilities, outdoor.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.27 Facilities, outdoor. (a) Hamsters shall not be housed in outdoor facilities. (b) Guinea pigs shall not be housed in outdoor facilities unless...

9 CFR 3.27 - Facilities, outdoor.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.27 Facilities, outdoor. (a) Hamsters shall not be housed in outdoor facilities. (b) Guinea pigs shall not be housed in outdoor facilities unless...

Facilities Standards and Planning Manual for New Jersey County Community Colleges.

ERIC Educational Resources Information Center

New Jersey State Dept. of Higher Education, Trenton. Office of Community Coll. Programs.

After some general comments concerning all guidelines, planning standards are described for--(1) various types of new facilities, (2) expansion of present facilities, (3) minimum space requirements for a college, (4) net-to-gross space ratios, and (5) total project costs. Information regarding capital construction project submissions procedure is…

42 CFR 442.2 - Terms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ASSISTANCE PROGRAMS STANDARDS FOR PAYMENT TO NURSING FACILITIES AND INTERMEDIATE CARE FACILITIES FOR... a nursing facility, and an intermediate care facility for Individuals with Intellectual Disabilities...

Mapping the Characteristics of Critical Care Facilities: Assessment, Distribution, and Level of Critical Care Facilities from Central India.

PubMed

Saigal, Saurabh; Sharma, Jai Prakash; Pakhare, Abhijit; Bhaskar, Santosh; Dhanuka, Sanjay; Kumar, Sanjay; Sabde, Yogesh; Bhattacharya, Pradip; Joshi, Rajnish

2017-10-01

In low- and middle-income countries such as India, where health systems are weak, the number of available Critical Care Unit (Intensive Care Unit [ICU]) beds is expected to be low. There is no study from the Indian subcontinent that has reported the characteristics and distribution of existing ICUs. We performed this study to understand the characteristics and distribution of ICUs in Madhya Pradesh (MP) state of Central India. We also aimed to develop a consensus scoring system and internally validate it to define levels of care and to improve health system planning and to strengthen referral networks in the state. We obtained a list of potential ICU facilities from various sources and then performed a cross-sectional survey by visiting each facility and determining characteristics for each facility. We collected variables with respect to infrastructure, human resources, equipment, support services, procedures performed, training courses conducted, and in-place policies or standard operating procedure documents. We identified a total of 123 ICUs in MP. Of 123 ICUs, 35 were level 1 facilities, 74 were level 2 facilities, and only 14 were level 3 facilities. Overall, there were 0.17 facilities per 100,000 population (95* confidence interval [CI] 0.14-0.20 per 100,000 populations). There were a total of 1816 ICU beds in the state, with an average of 2.5 beds per 100,000 population (95* CI 2.4-2.6 per 100,000 population). Of the total number of ICU beds, 250 are in level 1, 1141 are in level 2, and 425 are in level 3 facilities. This amounts to 0.34, 1.57, and 0.59 ICU beds per 100,000 population for levels 1, 2, and 3, respectively. This study could just be an eye opener for our healthcare authorities at both state and national levels to estimate the proportion of ICU beds per lac population. Similar mapping of intensive care services from other States will generate national data that is hitherto unknown.

Qualification and Selection of Flight Diode Lasers for Space Applications

NASA Technical Reports Server (NTRS)

Liebe, Carl C.; Dillon, Robert P.; Gontijo, Ivair; Forouhar, Siamak; Shapiro, Andrew A.; Cooper, Mark S.; Meras, Patrick L.

2010-01-01

The reliability and lifetime of laser diodes is critical to space missions. The Nuclear Spectroscopic Telescope Array (NuSTAR) mission includes a metrology system that is based upon laser diodes. An operational test facility has been developed to qualify and select, by mission standards, laser diodes that will survive the intended space environment and mission lifetime. The facility is situated in an electrostatic discharge (ESD) certified clean-room and consist of an enclosed temperature-controlled stage that can accommodate up to 20 laser diodes. The facility is designed to characterize a single laser diode, in addition to conducting laser lifetime testing on up to 20 laser diodes simultaneously. A standard laser current driver is used to drive a single laser diode. Laser diode current, voltage, power, and wavelength are measured for each laser diode, and a method of selecting the most adequate laser diodes for space deployment is implemented. The method consists of creating histograms of laser threshold currents, powers at a designated current, and wavelengths at designated power. From these histograms, the laser diodes that illustrate a performance that is outside the normal are rejected and the remaining lasers are considered spaceborne candidates. To perform laser lifetime testing, the facility is equipped with 20 custom laser drivers that were designed and built by California Institute of Technology specifically to drive NuSTAR metrology lasers. The laser drivers can be operated in constant-current mode or alternating-current mode. Situated inside the enclosure, in front of the laser diodes, are 20 power-meter heads to record laser power throughout the duration of lifetime testing. Prior to connecting a laser diode to the current source for characterization and lifetime testing, a background program is initiated to collect current, voltage, and resistance. This backstage data collection enables the operational test facility to have full laser diode traceablity.

Centaur Standard Shroud Test in the Space Power Facility

NASA Image and Video Library

1973-08-21

The Centaur Standard Shroud prepared for a jettison test in the Space Power Facility at the National Aeronautics and Space Administration’s (NASA) Plum Brook Station. In the late 1960s NASA engineers were planning the ambitious new Viking mission to send two rover vehicles to the surface of Mars. The Viking rovers were the heaviest payloads ever attempted by the Centaur second-stage rocket. Each Viking was over three times the weight of the Atlas-Centaur’s previous heaviest payload. Consequently, NASA engineers sought to mate the Centaur with the more powerful Titan III booster for the launches. General Dynamics created a new version of the Centaur, D-1T, specifically for Titan. The D-1T’s most significant modification was a completely new shroud designed by Lockheed, called the Centaur Standard Shroud. The conical two-piece covering encapsulated the payload to protect it against adverse conditions and improve the aerodynamics as the launch vehicle passed through the atmosphere. The shroud would be jettisoned when the vehicle reached the edge of space. A string of tests were conducted in Plum Brook’s Nuclear Rocket Dynamics and Control Facility (B-3) during 1973 and 1974. The new shroud performed flawlessly during the actual Viking launches in 1975. Viking 1 and 2 operated on the Martian surface until November 1982 and April 1980, respectively.

Spontaneous Raman Scattering (SRS) System for Calibrating High-Pressure Flames Became Operational

NASA Technical Reports Server (NTRS)

Nguyen, Quang-Viet

2003-01-01

A high-performance spontaneous Raman scattering (SRS) system for measuring quantitative species concentration and temperature in high-pressure flames is now operational. The system is located in Glenn s Engine Research Building. Raman scattering is perhaps the only optical diagnostic technique that permits the simultaneous (single-shot) measurement of all major species (N2, O2, CO2, H2O, CO, H2, and CH4) as well as temperature in combustion systems. The preliminary data acquired with this new system in a 20-atm hydrogen-air (H2-air) flame show excellent spectral coverage, good resolution, and a signal-to-noise ratio high enough for the data to serve as a calibration standard. This new SRS diagnostic system is used in conjunction with the newly developed High- Pressure Gaseous Burner facility (ref. 1). The main purpose of this diagnostic system and the High-Pressure Gaseous Burner facility is to acquire and establish a comprehensive Raman-scattering spectral database calibration standard for the combustion diagnostic community. A secondary purpose of the system is to provide actual measurements in standardized flames to validate computational combustion models. The High-Pressure Gaseous Burner facility and its associated SRS system will provide researchers throughout the world with new insights into flame conditions that simulate the environment inside the ultra-high-pressure-ratio combustion chambers of tomorrow s advanced aircraft engines.

Using Clinical Data Standards to Measure Quality: A New Approach.

PubMed

D'Amore, John D; Li, Chun; McCrary, Laura; Niloff, Jonathan M; Sittig, Dean F; McCoy, Allison B; Wright, Adam

2018-04-01

 Value-based payment for care requires the consistent, objective calculation of care quality. Previous initiatives to calculate ambulatory quality measures have relied on billing data or individual electronic health records (EHRs) to calculate and report performance. New methods for quality measure calculation promoted by federal regulations allow qualified clinical data registries to report quality outcomes based on data aggregated across facilities and EHRs using interoperability standards.  This research evaluates the use of clinical document interchange standards as the basis for quality measurement.  Using data on 1,100 patients from 11 ambulatory care facilities and 5 different EHRs, challenges to quality measurement are identified and addressed for 17 certified quality measures.  Iterative solutions were identified for 14 measures that improved patient inclusion and measure calculation accuracy. Findings validate this approach to improving measure accuracy while maintaining measure certification.  Organizations that report care quality should be aware of how identified issues affect quality measure selection and calculation. Quality measure authors should consider increasing real-world validation and the consistency of measure logic in respect to issues identified in this research. Schattauer GmbH Stuttgart.

A New Standard for Assessing the Performance of High Contrast Imaging Systems

NASA Astrophysics Data System (ADS)

Jensen-Clem, Rebecca; Mawet, Dimitri; Gomez Gonzalez, Carlos A.; Absil, Olivier; Belikov, Ruslan; Currie, Thayne; Kenworthy, Matthew A.; Marois, Christian; Mazoyer, Johan; Ruane, Garreth; Tanner, Angelle; Cantalloube, Faustine

2018-01-01

As planning for the next generation of high contrast imaging instruments (e.g., WFIRST, HabEx, and LUVOIR, TMT-PFI, EELT-EPICS) matures and second-generation ground-based extreme adaptive optics facilities (e.g., VLT-SPHERE, Gemini-GPI) finish their principal surveys, it is imperative that the performance of different designs, post-processing algorithms, observing strategies, and survey results be compared in a consistent, statistically robust framework. In this paper, we argue that the current industry standard for such comparisons—the contrast curve—falls short of this mandate. We propose a new figure of merit, the “performance map,” that incorporates three fundamental concepts in signal detection theory: the true positive fraction, the false positive fraction, and the detection threshold. By supplying a theoretical basis and recipe for generating the performance map, we hope to encourage the widespread adoption of this new metric across subfields in exoplanet imaging.

33 CFR 158.250 - Standard discharge connection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Reception Facilities: Oily Mixtures § 158.250 Standard discharge connection. Each reception facility that received bilge water containing oily mixtures must have a standard discharge connection that— (a) Meets § 155.430 of this subchapter; and (b) Attaches to each hose or pipe that removes bilge water containing...

33 CFR 158.250 - Standard discharge connection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Reception Facilities: Oily Mixtures § 158.250 Standard discharge connection. Each reception facility that received bilge water containing oily mixtures must have a standard discharge connection that— (a) Meets § 155.430 of this subchapter; and (b) Attaches to each hose or pipe that removes bilge water containing...

33 CFR 158.250 - Standard discharge connection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Reception Facilities: Oily Mixtures § 158.250 Standard discharge connection. Each reception facility that received bilge water containing oily mixtures must have a standard discharge connection that— (a) Meets § 155.430 of this subchapter; and (b) Attaches to each hose or pipe that removes bilge water containing...

33 CFR 158.250 - Standard discharge connection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Reception Facilities: Oily Mixtures § 158.250 Standard discharge connection. Each reception facility that received bilge water containing oily mixtures must have a standard discharge connection that— (a) Meets § 155.430 of this subchapter; and (b) Attaches to each hose or pipe that removes bilge water containing...

33 CFR 158.250 - Standard discharge connection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Reception Facilities: Oily Mixtures § 158.250 Standard discharge connection. Each reception facility that received bilge water containing oily mixtures must have a standard discharge connection that— (a) Meets § 155.430 of this subchapter; and (b) Attaches to each hose or pipe that removes bilge water containing...

Complaints in for-profit, non-profit and public nursing homes in two Canadian provinces

PubMed Central

McGregor, Margaret J; Cohen, Marcy; Stocks-Rankin, Catherine-Rose; Cox, Michelle B; Salomons, Kia; McGrail, Kimberlyn M; Spencer, Charmaine; Ronald, Lisa A; Schulzer, Michael

2011-01-01

Background Nursing homes provide long-term housing, support and nursing care to frail elders who are no longer able to function independently. Although studies conducted in the United States have demonstrated an association between for-profit ownership and inferior quality, relatively few Canadian studies have made performance comparisons with reference to type of ownership. Complaints are one proxy measure of performance in the nursing home setting. Our study goal was to determine whether there is an association between facility ownership and the frequency of nursing home complaints. Methods We analyzed publicly available data on complaints, regulatory measures, facility ownership and size for 604 facilities in Ontario over 1 year (2007/08) and 62 facilities in British Columbia (Fraser Health region) over 4 years (2004–2008). All analyses were carried out at the facility level. Negative binomial regression analysis was used to assess the association between type of facility ownership and frequency of complaints. Results The mean (standard deviation) number of verified/substantiated complaints per 100 beds per year in Ontario and Fraser Health was 0.45 (1.10) and 0.78 (1.63) respectively. Most complaints related to resident care. Complaints were more frequent in facilities with more citations, i.e., violations of the legislation or regulations governing a home, (Ontario) and inspection violations (Fraser Health). Compared with Ontario’s for-profit chain facilities, adjusted incident rate ratios and 95% confidence intervals of verified complaints were 0.56 (0.27–1.16), 0.58 (0.34–1.00), 0.43 (0.21– 0.88), and 0.50 (0.30– 0.84) for for-profit single-site, non-profit, charitable, and public facilities respectively. In Fraser Health, the adjusted incident rate ratio of substantiated complaints in non-profit facilities compared with for-profit facilities was 0.18 (0.07–0.45). Interpretation Compared with for-profit chain facilities, non-profit, charitable and public facilities had significantly lower rates of complaints in Ontario. Likewise, in British Columbia’s Fraser Health region, non-profit owned facilities had significantly lower rates of complaints compared with for-profit owned facilities. PMID:22567074

41 CFR 102-74.115 - What standard in providing asset services must Executive agencies follow?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 74-FACILITY MANAGEMENT Facility Management Asset Services § 102-74.115 What standard... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What standard in...

36 CFR 1281.4 - What are the architectural and design standards for Presidential libraries?

Code of Federal Regulations, 2012 CFR

2012-07-01

... and design standards for Presidential libraries? 1281.4 Section 1281.4 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.4 What are the architectural and design standards for Presidential libraries? The Archivist is...

36 CFR 1281.4 - What are the architectural and design standards for Presidential libraries?

Code of Federal Regulations, 2014 CFR

2014-07-01

... and design standards for Presidential libraries? 1281.4 Section 1281.4 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.4 What are the architectural and design standards for Presidential libraries? The Archivist is...

36 CFR 1281.4 - What are the architectural and design standards for Presidential libraries?

Code of Federal Regulations, 2011 CFR

2011-07-01

... and design standards for Presidential libraries? 1281.4 Section 1281.4 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.4 What are the architectural and design standards for Presidential libraries? The Archivist is...

36 CFR 1281.4 - What are the architectural and design standards for Presidential libraries?

Code of Federal Regulations, 2010 CFR

2010-07-01

... and design standards for Presidential libraries? 1281.4 Section 1281.4 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.4 What are the architectural and design standards for Presidential libraries? The Archivist is...

76 FR 14405 - Agency Information Collection Activities; Proposed Collection; Comment Request; Guidance for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-16

... facility, and (4) standard operating procedures as follows: 1. Notification of All Important Proposed... facility. 4. Standard Operating Procedures In the guidance, we (FDA) remind the license manufacture that... establishment standards (21 CFR 600.3(t)). Therefore, if the license manufacturer enters into an agreement with...

40 CFR 60.242 - Standard for fluorides.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.242 Section... Industry: Granular Triple Superphosphate Storage Facilities § 60.242 Standard for fluorides. (a) On and... atmosphere from any affected facility any gases which contain total fluorides in excess of 0.25 g/hr/megagram...

40 CFR 60.242 - Standard for fluorides.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.242 Section... Industry: Granular Triple Superphosphate Storage Facilities § 60.242 Standard for fluorides. (a) On and... atmosphere from any affected facility any gases which contain total fluorides in excess of 0.25 g/hr/megagram...

Prepared to react? Assessing the functional capacity of the primary health care system in rural Orissa, India to respond to the devastating flood of September 2008.

PubMed

Phalkey, Revati; Dash, Shisir R; Mukhopadhyay, Alok; Runge-Ranzinger, Silvia; Marx, Michael

2012-01-01

Early detection of an impending flood and the availability of countermeasures to deal with it can significantly reduce its health impacts. In developing countries like India, public primary health care facilities are frontline organizations that deal with disasters particularly in rural settings. For developing robust counter reacting systems evaluating preparedness capacities within existing systems becomes necessary. The objective of the study is to assess the functional capacity of the primary health care system in Jagatsinghpur district of rural Orissa in India to respond to the devastating flood of September 2008. An onsite survey was conducted in all 29 primary and secondary facilities in five rural blocks (administrative units) of Jagatsinghpur district in Orissa state. A pre-tested structured questionnaire was administered face to face in the facilities. The data was entered, processed and analyzed using STATA(®) 10. Data from our primary survey clearly shows that the healthcare facilities are ill prepared to handle the flood despite being faced by them annually. Basic utilities like electricity backup and essential medical supplies are lacking during floods. Lack of human resources along with missing standard operating procedures; pre-identified communication and incident command systems; effective leadership; and weak financial structures are the main hindering factors in mounting an adequate response to the floods. The 2008 flood challenged the primary curative and preventive health care services in Jagatsinghpur. Simple steps like developing facility specific preparedness plans which detail out standard operating procedures during floods and identify clear lines of command will go a long way in strengthening the response to future floods. Performance critiques provided by the grass roots workers, like this one, should be used for institutional learning and effective preparedness planning. Additionally each facility should maintain contingency funds for emergency response along with local vendor agreements to ensure stock supplies during floods. The facilities should ensure that baseline public health standards for health care delivery identified by the Government are met in non-flood periods in order to improve the response during floods. Building strong public primary health care systems is a development challenge. The recovery phases of disasters should be seen as an opportunity to expand and improve services and facilities.

Prepared to react? Assessing the functional capacity of the primary health care system in rural Orissa, India to respond to the devastating flood of September 2008

PubMed Central

Phalkey, Revati; Dash, Shisir R.; Mukhopadhyay, Alok; Runge-Ranzinger, Silvia; Marx, Michael

2012-01-01

Background Early detection of an impending flood and the availability of countermeasures to deal with it can significantly reduce its health impacts. In developing countries like India, public primary health care facilities are frontline organizations that deal with disasters particularly in rural settings. For developing robust counter reacting systems evaluating preparedness capacities within existing systems becomes necessary. Objective The objective of the study is to assess the functional capacity of the primary health care system in Jagatsinghpur district of rural Orissa in India to respond to the devastating flood of September 2008. Methods An onsite survey was conducted in all 29 primary and secondary facilities in five rural blocks (administrative units) of Jagatsinghpur district in Orissa state. A pre-tested structured questionnaire was administered face to face in the facilities. The data was entered, processed and analyzed using STATA® 10. Results Data from our primary survey clearly shows that the healthcare facilities are ill prepared to handle the flood despite being faced by them annually. Basic utilities like electricity backup and essential medical supplies are lacking during floods. Lack of human resources along with missing standard operating procedures; pre-identified communication and incident command systems; effective leadership; and weak financial structures are the main hindering factors in mounting an adequate response to the floods. Conclusion The 2008 flood challenged the primary curative and preventive health care services in Jagatsinghpur. Simple steps like developing facility specific preparedness plans which detail out standard operating procedures during floods and identify clear lines of command will go a long way in strengthening the response to future floods. Performance critiques provided by the grass roots workers, like this one, should be used for institutional learning and effective preparedness planning. Additionally each facility should maintain contingency funds for emergency response along with local vendor agreements to ensure stock supplies during floods. The facilities should ensure that baseline public health standards for health care delivery identified by the Government are met in non-flood periods in order to improve the response during floods. Building strong public primary health care systems is a development challenge. The recovery phases of disasters should be seen as an opportunity to expand and improve services and facilities. PMID:22435044

The 4MOST facility control software

NASA Astrophysics Data System (ADS)

Pramskiy, Alexander; Mandel, Holger; Rothmaier, Florian; Stilz, Ingo; Winkler, Roland; Hahn, Thomas

2016-07-01

The 4-m Multi-Object Spectrographic Telescope (4MOST) is one high-resolution (R 18000) and two lowresolution (R fi 5000) spectrographs covering the wavelength range between 390 and 950 nm. The spectrographs will be installed on ESO VISTA telescope and will be fed by approximately 2400 fibres. The instrument is capable to simultaneously obtain spectra of about 2400 objects distributed over an hexagonal field-of-view of four square degrees. This paper aims at giving an overview of the control software design, which is based on the standard ESO VLT software architecture and customised to fit the needs of the 4MOST instrument. In particular, the facility control software is intended to arrange the precise positioning of the fibres, to schedule and observe many surveys in parallel, and to combine the output from the three spectrographs. Moreover, 4MOST's software will include user-friendly graphical user interfaces that enable users to interact with the facility control system and to monitor all data-taking and calibration tasks of the instrument. A secondary guiding system will be implemented to correct for any fibre exure and thus to improve 4MOST's guiding performance. The large amount of fibres requires the custom design of data exchange to avoid performance issues. The observation sequences are designed to use spectrographs in parallel with synchronous points for data exchange between subsystems. In order to control hardware devices, Programmable Logic Controller (PLC) components will be used, the new standard for future instruments at ESO.

High-Data-Rate Quadrax Cable Microwave Characterization at the NASA Glenn Structural Dynamics Laboratory

NASA Technical Reports Server (NTRS)

Theofylaktos, Onoufrios; Warner, Joseph D.; Sheehe, Charles J.

2012-01-01

An experiment was performed to determine the degradation in the bit-error-rate (BER) in the high-data-rate cables chosen for the Orion Service Module due to extreme launch conditions of vibrations with a magnitude of 60g. The cable type chosen for the Orion Service Module was no. 8 quadrax cable. The increase in electrical noise induced on these no. 8 quadrax cables was measured at the NASA Glenn vibration facility in the Structural Dynamics Laboratory. The intensity of the vibrations was set at 32g, which was the maximum available level at the facility. The cable lengths used during measurements were 1, 4, and 8 m. The noise measurements were done in an analog fashion using a performance network analyzer (PNA) by recording the standard deviation of the transmission scattering parameter S(sub 21) over the frequency range of 100 to 900 MHz. The standard deviation of S(sub 210 was measured before, during, and after the vibration of the cables at the vibration facility. We observed an increase in noise by a factor of 2 to 6. From these measurements we estimated the increase expected in the BER for a cable length of 25 m and concluded that these findings are large enough that the noise increase due to vibration must be taken in to account for the design of the communication system for a BER of 10(exp -8).

North Carolina Public Schools Facility Standards. A Guide for Planning School Facilities.

ERIC Educational Resources Information Center

Knott, Gerald H.; Lora, James M.; Acker, Marjorie L.; Taynton, Steven; Logan, Gladys B.; Harrell, Ronald C.

The State of North Carolina has developed a planning guide for those in the process of building, enlarging, or renovating school facilities. This guide defines and describes the educational spaces needed to support a modern, comprehensive educational program and sets minimal standards for the types and sizes of spaces required. It serves as a…

9 CFR 354.210 - Minimum standards for sanitation, facilities, and operating procedures in official plants.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Minimum standards for sanitation, facilities, and operating procedures in official plants. 354.210 Section 354.210 Animals and Animal Products... sanitation, facilities, and operating procedures in official plants. The provisions of §§ 354.210 to 354.247...

9 CFR 354.210 - Minimum standards for sanitation, facilities, and operating procedures in official plants.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Minimum standards for sanitation, facilities, and operating procedures in official plants. 354.210 Section 354.210 Animals and Animal Products... sanitation, facilities, and operating procedures in official plants. The provisions of §§ 354.210 to 354.247...

9 CFR 354.210 - Minimum standards for sanitation, facilities, and operating procedures in official plants.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Minimum standards for sanitation, facilities, and operating procedures in official plants. 354.210 Section 354.210 Animals and Animal Products... sanitation, facilities, and operating procedures in official plants. The provisions of §§ 354.210 to 354.247...

9 CFR 354.210 - Minimum standards for sanitation, facilities, and operating procedures in official plants.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Minimum standards for sanitation, facilities, and operating procedures in official plants. 354.210 Section 354.210 Animals and Animal Products... sanitation, facilities, and operating procedures in official plants. The provisions of §§ 354.210 to 354.247...

9 CFR 354.210 - Minimum standards for sanitation, facilities, and operating procedures in official plants.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Minimum standards for sanitation, facilities, and operating procedures in official plants. 354.210 Section 354.210 Animals and Animal Products... sanitation, facilities, and operating procedures in official plants. The provisions of §§ 354.210 to 354.247...

33 CFR 157.304 - Shore-based reception facility: standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Shore-based reception facility: standards. 157.304 Section 157.304 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... CARRYING OIL IN BULK Exemption From § 157.10a or § 157.10c § 157.304 Shore-based reception facility...

33 CFR 157.304 - Shore-based reception facility: standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Shore-based reception facility: standards. 157.304 Section 157.304 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... CARRYING OIL IN BULK Exemption From § 157.10a or § 157.10c § 157.304 Shore-based reception facility...

40 CFR 60.5401 - What are the exceptions to the equipment leak standards for affected facilities at onshore...

Code of Federal Regulations, 2014 CFR

2014-07-01

... equipment leak standards for affected facilities at onshore natural gas processing plants? 60.5401 Section... for affected facilities at onshore natural gas processing plants? (a) You may comply with the... is detected. (4)(i) Any pressure relief device that is located in a nonfractionating plant that is...

40 CFR 60.5401 - What are the exceptions to the equipment leak standards for affected facilities at onshore...

Code of Federal Regulations, 2013 CFR

2013-07-01

... equipment leak standards for affected facilities at onshore natural gas processing plants? 60.5401 Section... for affected facilities at onshore natural gas processing plants? (a) You may comply with the... is detected. (4)(i) Any pressure relief device that is located in a nonfractionating plant that is...

25 CFR 10.2 - Who is responsible for developing and maintaining the policies and standards for detention and...

Code of Federal Regulations, 2010 CFR

2010-04-01

... policies and standards for detention and holding facilities in Indian country? 10.2 Section 10.2 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER INDIAN COUNTRY DETENTION FACILITIES... detention and holding facilities in Indian country? The Director, Office of Law Enforcement Services who...

25 CFR 10.2 - Who is responsible for developing and maintaining the policies and standards for detention and...

Code of Federal Regulations, 2011 CFR

2011-04-01

... policies and standards for detention and holding facilities in Indian country? 10.2 Section 10.2 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER INDIAN COUNTRY DETENTION FACILITIES... detention and holding facilities in Indian country? The Director, Office of Law Enforcement Services who...

Fluid handling 2: Surgical applications

NASA Technical Reports Server (NTRS)

Billica, Roger; Young, John; Rushing, Doug; Kizzee, Victor D.

1991-01-01

The methods proposed for managing fluids and particulate debris during minor surgery on Space Station Freedom (SSF) were investigated and demonstrated. A KC-135 parabolic flight test was performed, in which the flight followed the standard 40 parabola profile with 20 to 25 seconds in near-zero gravity in each parabola. The equipment (suction and laminar flow device) was evaluated. While this equipment performed satisfactorily previously in the dental simulation, the purpose of the current flight was to reconfigure the equipment in support of a minor surgical situation in order to evaluate its efficacy and establish clear requirements for the actual flight hardware. To accomplish the study the Health Maintenance Facility medical restraint system was deployed as for surgical use and mannequin suture arm was restrained to its surface. The surgical area was established as for performing minor surgery with standard tray and suture instruments employed.

Improvement of the mechanical reliability of monolithic refractory linings for coal gasification process vessels. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Potter, R.A.

1981-09-01

Eighteen heat-up tests were run on nine standard and experimental dual component monolithic refractory concrete linings. These tests were run with a five foot diameter by 14-ft high Pressure Vessel/Test Furnace designed to accommodate a 12-inch thick by 5-ft high refractory lining, heat the hot face to 2000/sup 0/F and expose the lining to air or steam pressures up to 150 psig. Results obtained from standard type linings in the test facility indicated that lining degradation duplicated that observed in field installations. The lining performance was significantly improved due to information gained from a systematic study of the cracking thatmore » occurred in the linings; the analysis of the lining strains, shell stresses and acoustic emission results; and the stress analyses performed on the standard and experimental lining designs with the finite element analysis computer programs, REFSAM and RESGAP.« less

ORNL necessary and sufficient standards for environment, safety, and health. Final report of the Identification Team for other industrial, radiological, and non-radiological hazard facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-07-01

This Necessary and Sufficient (N and S) set of standards is for Other Industrial, Radiological, and Non-Radiological Hazard Facilities at Oak Ridge National Laboratory (ORNL). These facility classifications are based on a laboratory-wide approach to classify facilities by hazard category. An analysis of the hazards associated with the facilities at ORNL was conducted in 1993. To identify standards appropriate for these Other Industrial, Radiological, and Non-Radiological Hazard Facilities, the activities conducted in these facilities were assessed, and the hazards associated with the activities were identified. A preliminary hazards list was distributed to all ORNL organizations. The hazards identified in priormore » hazard analyses are contained in the list, and a category of other was provided in each general hazard area. A workshop to assist organizations in properly completing the list was held. Completed hazard screening lists were compiled for each ORNL division, and a master list was compiled for all Other Industrial, Radiological Hazard, and Non-Radiological facilities and activities. The master list was compared against the results of prior hazard analyses by research and development and environment, safety, and health personnel to ensure completeness. This list, which served as a basis for identifying applicable environment, safety, and health standards, appears in Appendix A.« less

Field evaluations of the VD max approach for substantiation of a 25 kGy sterilization dose and its application to other preselected doses

NASA Astrophysics Data System (ADS)

Kowalski, John B.; Herring, Craig; Baryschpolec, Lisa; Reger, John; Patel, Jay; Feeney, Mary; Tallentire, Alan

2002-08-01

The International and European standards for radiation sterilization require evidence of the effectiveness of a minimum sterilization dose of 25 kGy but do not provide detailed guidance on how this evidence can be generated. An approach, designated VD max, has recently been described and computer evaluated to provide safe and unambiguous substantiation of a 25 kGy sterilization dose. The approach has been further developed into a practical method, which has been subjected to field evaluations at three manufacturing facilities which produce different types of medical devices. The three facilities each used a different overall evaluation strategy: Facility A used VD max for quarterly dose audits; Facility B compared VD max and Method 1 in side-by-side parallel experiments; and Facility C, a new facility at start-up, used VD max for initial substantiation of 25 kGy and subsequent quarterly dose audits. A common element at all three facilities was the use of 10 product units for irradiation in the verification dose experiment. The field evaluations of the VD max method were successful at all three facilities; they included many different types of medical devices/product families with a wide range of average bioburden and sample item portion values used in the verification dose experiments. Overall, around 500 verification dose experiments were performed and no failures were observed. In the side-by-side parallel experiments, the outcomes of the VD max experiments were consistent with the outcomes observed with Method 1. The VD max approach has been extended to sterilization doses >25 and <25 kGy; verification doses have been derived for sterilization doses of 15, 20, 30, and 35 kGy. Widespread application of the VD max method for doses other than 25 kGy must await controlled field evaluations and the development of appropriate specifications/standards.

[Comprehensive study on the prevention of food poisoning through the investigation of an affected hospital food service facility].

PubMed

Kubota, Satoshi; Kawai, Hiromi

2015-01-01

In Japan, more than 20,000 people suffer from various types of food poisoning annually. In this paper, we discuss the prevention of food poisoning in hospital food service facilities from the perspective of hygiene management and organizational behavior. We inspected the kitchen environment and the meal preparation process in a hospital food service facility in Japan that had been the site of a food poisoning incident. To clarify the present state of hygiene management, interviews were conducted with both the head of the nutrition and food service section and the administrative manager. In addition, questionnaires were distributed to the food service staff to assess their level of satisfaction with the working environment. The facility had been built about 10 years previously and was well maintained. Meal preparations were performed according to the operation manual, and education and training for the food service staff were carried out daily. No problems were evident regarding hygiene management. However, concerning organizational behavior, the satisfaction level of the staff was found to be relatively low, which may have led to a reduction in their organizational commitment and a decrease in their performance. To aid in the prevention of food poisoning incidents in hospital food service facilities, it is essential not only to conduct standard hygiene management and training, but also to consider the organizational behavior of the food service staff.

Radiometric Calibration of the NASA Advanced X-Ray Astrophysics Facility

NASA Technical Reports Server (NTRS)

Kellogg, Edwin M.

1999-01-01

We present the results of absolute calibration of the quantum efficiency of soft x-ray detectors performed at the PTB/BESSY beam lines. The accuracy goal is 1%. We discuss the implementation of that goal. These detectors were used as transfer standards to provide the radiometric calibration of the AXAF X-ray observatory, to be launched in April 1999.

Freeze-Dried Human Red Blood Cells

DTIC Science & Technology

1992-04-15

are unlikely to survive until the next scheduled observation will be euthanized. Euthanasia of moribund animals will be authorized by the Study Director...discussed below will be performed in accordance with the Standard Operating Procedures of the Test Facility. A. Euthanasia : Euthanasia (overdose of...American Veterinary Medical Association (AVMA) Panel on Euthanasia Journal of American Veterinary Medical Association, 188:252-268, 1986). I I In

Equivalency testing of ultraviolet disinfection for wastewater reclamation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oppenheimer, J.A.; Jacangelo, J.G.; Laine, J.M.

1996-11-01

UV light disinfection was shown to continuously provide microbial inactivation equivalent to chlorine while reducing the formation of known carcinogenic disinfection by-products and the formation of chronic whole effluent toxicity. This was the first study to demonstrate UV`s performance relative to chlorination over an extended timeframe at a full-scale facility treating to meet the most stringent California reclamation standards.

The Impact of Post-Training on Job Performance in Nigera's Oil Industry

ERIC Educational Resources Information Center

Aibieyi, Stanley

2012-01-01

The Nigeria's oil industry has been criticized for some time now for its inability to render adequate services to the general public. This criticism is predicated on the fact that the standards of productivity in their services are low and that their facilities (i.e. the refineries) are not working up to capacity. This is evident in their…

Hydrodynamic instability experiments with three-dimensional modulations at the National Ignition Facility

DOE PAGES

Smalyuk, V. A.; Weber, S. V.; Casey, D. T.; ...

2015-06-18

The first hydrodynamic instability growth measurements with three-dimensional (3D) surface-roughness modulations were performed on CH shell spherical implosions at the National Ignition Facility (NIF) [G. H. Miller, E. I. Moses, and C. R. Wuest, Opt. Eng. 43, 2841 (2004)]. The initial capsule outer-surface amplitudes were increased approximately four times, compared with the standard specifications, to increase the signal-to-noise ratio, helping to qualify a technique for measuring small 3D modulations. The instability growth measurements were performed using x-ray through-foil radiography based on time-resolved pinhole imaging. Averaging over 15 similar images significantly increased the signal-to-noise ratio, making possible a comparison with 3Dmore » simulations. At a convergence ratio of ~2.4, the measured modulation levels were ~3 times larger than those simulated based on the growth of the known imposed initial surface modulations. Several hypotheses are discussed, including increased instability growth due to modulations of the oxygen content in the bulk of the capsule. In conclusion, future experiments will be focused on measurements with standard 3D ‘native-roughness’ capsules as well as with deliberately imposed oxygen modulations.« less

High Sensitivity and Specificity of Clinical Microscopy in Rural Health Facilities in Western Kenya Under an External Quality Assurance Program

PubMed Central

Wafula, Rebeccah; Sang, Edna; Cheruiyot, Olympia; Aboto, Angeline; Menya, Diana; O'Meara, Wendy Prudhomme

2014-01-01

Microscopic diagnosis of malaria is a well-established and inexpensive technique that has the potential to provide accurate diagnosis of malaria infection. However, it requires both training and experience. Although it is considered the gold standard in research settings, the sensitivity and specificity of routine microscopy for clinical care in the primary care setting has been reported to be unacceptably low. We established a monthly external quality assurance program to monitor the performance of clinical microscopy in 17 rural health centers in western Kenya. The average sensitivity over the 12-month period was 96% and the average specificity was 88%. We identified specific contextual factors that contributed to inadequate performance. Maintaining high-quality malaria diagnosis in high-volume, resource-constrained health facilities is possible. PMID:24935953

9 CFR 3.25 - Facilities, general.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.25 Facilities, general. (a) Structural strength. Indoor and outdoor housing facilities for guinea pigs or hamsters shall be structurally sound and...

9 CFR 3.25 - Facilities, general.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.25 Facilities, general. (a) Structural strength. Indoor and outdoor housing facilities for guinea pigs or hamsters shall be structurally sound and...

9 CFR 3.25 - Facilities, general.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.25 Facilities, general. (a) Structural strength. Indoor and outdoor housing facilities for guinea pigs or hamsters shall be structurally sound and...

9 CFR 3.25 - Facilities, general.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.25 Facilities, general. (a) Structural strength. Indoor and outdoor housing facilities for guinea pigs or hamsters shall be structurally sound and...

Demonstration/Validation of Environmentally-Preferable Coatings for Launch Facilities

NASA Technical Reports Server (NTRS)

Lewis, Pattie

2011-01-01

Kennedy Space Center (KSC) is responsible for a number of facilities/structures with metallic structural and non-structural components in a highly corrosive environment. Metals require periodic maintenance activity to guard against the insidious effects of corrosion and thus ensure that structures meet or exceed design or performance life. The standard practice for protecting metallic substrates in atmospheric environments is the application of an applied coating system. Applied coating systems work via a variety of methods (barrier, galvanic and/or inhibitor) and adhere to the substrate through a combination of chemical and physical bonds. Maintenance at KSC and other NASA Centers is governed by NASA-STD-50088 (Protective Coating of Carbon Steel, Stainless Steel, and Aluminum on Launch Structures, Facilities, and Ground Support Equipment) which establishes practices for the protective coating of ground support equipment and related facilities used by or for NASA programs and projects. The Standard is for the design of non-flight hardware used to support the operations of receiving, transportation, handling, assembly, inspection, test, checkout, service, and launch of space vehicles and payloads at NASA launch, landing, or retrieval sites. These criteria and practices contained within the Standard may be used for items used at the manufacturing, development, and test sites upstream of the launch, landing, or retrieval sites. The objective of this effort is to demonstrate and validate environmentally-preferable alternatives in accordance with NASA-STD-50088 and KSC requirements which can then be added to the Approved Products List. This Test Protocol contains the critical requirements and tests necessary to qualify alternatives for structural steel applications. These tests were derived from engineering, performance, and operational impact (supportability) requirements defined by a consensus of KSC participants. A Test Report will document the results of the testing as well as any test modifications made during the execution of the testing. Users of this Test Protocol should check the project's Test Report for additional test details or minor modifications that may have been necessary in the execution of the testing. The technical stakeholders will have agreed upon test procedures modifications documented in the Test Report.

36 CFR § 1281.4 - What are the architectural and design standards for Presidential libraries?

Code of Federal Regulations, 2013 CFR

2013-07-01

... design standards for Presidential libraries? § 1281.4 Section § 1281.4 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.4 What are the architectural and design standards for Presidential libraries? The Archivist is...

36 CFR 1281.16 - What standard does NARA use for measuring building size?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false What standard does NARA use for measuring building size? 1281.16 Section 1281.16 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.16 What standard...

76 FR 48166 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-08

... contract facility; and (4) standard operating procedures. (1) Notification of All Important Proposed... facility. (4) Standard Operating Procedures In the guidance, we remind the license manufacturer that the... standards (21 CFR 600.3(t)). Therefore, if the license manufacturer enters into an agreement with a contract...

The international development of forensic science standards - A review.

PubMed

Wilson-Wilde, Linzi

2018-04-16

Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

Historical Evolution of NASA Standard Materials Testing with Hypergolic Propellants and Ammonia (NASA Standard 6001 Test 15)

NASA Technical Reports Server (NTRS)

Greene, Benjamin; McClure, Mark B.

2012-01-01

The NASA Johnson Space Center White Sands Test Facility (WSTF) has performed testing of hazardous and reactive aerospace fluids, including hypergolic propellants, with materials since the 1960s with the Apollo program. Amongst other test activities, Test 15 is a NASA standard test for evaluating the reactivity of materials with selected aerospace fluids, in particular hydrazine, monomethylhydrazine, uns-dimethylhydrazine, Aerozine 50, dinitrogen tetroxide oxidizers, and ammonia. This manuscript provides an overview of the history of Test 15 over a timeline ranging from prior to its development and first implementation as a NASA standard test in 1974 to its current refinement. Precursor documents to NASA standard tests, as they are currently known, are reviewed. A related supplementary test, international standardization, and enhancements to Test 15 are also discussed. Because WSTF was instrumental in the development and implementation of Test 15, WSTF experience and practices are referred to in this manuscript.

Aerospace Manufacturing and Rework Facilities: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

Find regulatory information regarding the NESHAP for Aerospace manufacturing and rework facilities. This page contains the rule summary, rule history, and related rules and additional resources for this standard.

Comparative Measurements of Earth and Martian Entry Environments in the NASA Langley HYMETS Facility

NASA Technical Reports Server (NTRS)

Splinter, Scott C.; Bey, Kim S.; Gragg, Jeffrey G.; Brewer, Amy

2011-01-01

Arc-jet facilities play a major role in the development of heat shield materials for entry vehicles because they are capable of producing representative high-enthalpy flow environments. Arc-jet test data is used to certify material performance for a particular mission and to validate or calibrate models of material response during atmospheric entry. Materials used on missions entering Earth s atmosphere are certified in an arc-jet using a simulated air entry environment. Materials used on missions entering the Martian atmosphere should be certified in an arc-jet using a simulated Martian atmosphere entry environment, which requires the use of carbon dioxide. Carbon dioxide has not been used as a test gas in a United States arc-jet facility since the early 1970 s during the certification of materials for the Viking Missions. Materials certified for the Viking missions have been used on every entry mission to Mars since that time. The use of carbon dioxide as a test gas in an arc-jet is again of interest to the thermal protection system community for certification of new heat shield materials that can increase the landed mass capability for Mars bound missions beyond that of Viking and Pathfinder. This paper describes the modification, operation, and performance of the Hypersonic Materials Environmental Test System (HYMETS) arc-jet facility with carbon dioxide as a test gas. A basic comparison of heat fluxes, various bulk properties, and performance characteristics for various Earth and Martian entry environments in HYMETS is provided. The Earth and Martian entry environments consist of a standard Earth atmosphere, an oxygen-rich Earth atmosphere, and a simulated Martian atmosphere. Finally, a preliminary comparison of the HYMETS arc-jet facility to several European plasma facilities is made to place the HYMETS facility in a more global context of arc-jet testing capability.

Case study, comparison of trial burn results from similar sulfuric acid regeneration plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milaszewski, M.; Johns, T.; Dickerson, W.F.

The primary business of Rhodia Eco Services (Rhodia) is the regeneration of sulfuric acid. Sulfuric acid regeneration requires thermal decomposition of acid to sulfur dioxide, and remaking the acid through chemical reaction. The sulfuric acid regeneration furnace is the ideal place to process pumpable wastes for energy recovery and for thermal destruction. Rhodia is regulated by the Boiler and Industrial Furnace (BIF) regulations (40 CFR 266, Subpart H). The Hammond, Indiana plant is an interim status BIF facility and the Houston, Texas facility is renewing its RCRA incineration permit as a BIF facility. Both plants have conducted BIF Trial Burnsmore » with very similar results. The performance levels demonstrated were at levels better than RCRA/BIF standards for destruction and removal efficiency, metal, HCl/Cl, particulate, dioxin/furan, and organic emissions.« less

A New High-Speed, High-Cycle, Gear-Tooth Bending Fatigue Test Capability

NASA Technical Reports Server (NTRS)

Stringer, David B.; Dykas, Brian D.; LaBerge, Kelsen E.; Zakrajsek, Andrew J.; Handschuh, Robert F.

2011-01-01

A new high-speed test capability for determining the high cycle bending-fatigue characteristics of gear teeth has been developed. Experiments were performed in the test facility using a standard spur gear test specimens designed for use in NASA Glenn s drive system test facilities. These tests varied in load condition and cycle-rate. The cycle-rate varied from 50 to 1000 Hz. The loads varied from high-stress, low-cycle loads to near infinite life conditions. Over 100 tests were conducted using AISI 9310 steel spur gear specimen. These results were then compared to previous data in the literature for correlation. Additionally, a cycle-rate sensitivity analysis was conducted by grouping the results according to cycle-rate and comparing the data sets. Methods used to study and verify load-path and facility dynamics are also discussed.

Potential Impacts of Accelerated Climate Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leung, L. R.; Vail, L. W.

2016-05-31

This research project is part of the U.S. Nuclear Regulatory Commission’s (NRC’s) Probabilistic Flood Hazard Assessment (PFHA) Research plan in support of developing a risk-informed licensing framework for flood hazards and design standards at proposed new facilities and significance determination tools for evaluating potential deficiencies related to flood protection at operating facilities. The PFHA plan aims to build upon recent advances in deterministic, probabilistic, and statistical modeling of extreme precipitation events to develop regulatory tools and guidance for NRC staff with regard to PFHA for nuclear facilities. The tools and guidance developed under the PFHA plan will support and enhancemore » NRC’s capacity to perform thorough and efficient reviews of license applications and license amendment requests. They will also support risk-informed significance determination of inspection findings, unusual events, and other oversight activities.« less

Studies on Automated Manufacturing of High Performance Composites

NASA Technical Reports Server (NTRS)

Cano, R. J.; Belvin, H. L.; Hulcher, A. B.; Grenoble, R. W.

2001-01-01

The NASA Langley Research Center fiber placement facility has proven to be a valuable asset for obtaining data, experience, and insights into the automated fabrication of high performance composites. The facility consists of two automated devices: an Asea Brown Boveri (ABB) robotic arm with a modified heated head capable of hot gas and focused infrared heating and a 7' x 17' gantry containing a feeder head, rotating platform, focused infrared lamp and e-beam gun. While uncured thermoset tow and tape, e.g., epoxy and cyanate prepreg, can be placed with a robot, the placement facility s most powerful attribute is the ability to place thermoplastic and e-beam curable material to net shape. In recent years, ribbonizing techniques have been developed to make high quality thermoplastic and thermoset dry material forms to the standards required for robotic placement. A variety of composites have been fabricated from these ribbons by heated head tow and tape placement including both flat plates and cylinders. Composite mechanical property values of the former were between 85 and 100 percent of those obtained by hand lay-up/autoclave processing.

On-site flow calibration of turbine meters for natural gas custody transfer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ting, V.C.; Schexnayder, L.L.; Conkling, D.B.

1991-05-01

This paper presents the design criteria, performance characteristics, and calibration procedures relating to a turbine-meter flow-calibration facility used in the high-volume custody transfer of natural gas. The facility, located in Venice, LA, is owned and operated by Chevron U.S.A. Inc. and is used to meter sales volumes of up to 500 MMscf/D (14.16 {times} 10 std m{sup 3}/d) at a nominal operating pressure of 1,000 psig (6.9 MPa). The system includes three 12-in. (30.48 cm) turbine meters used for sales-volume measurement, a bank of sonic nozzles, and a master turbine meter connected in series with the sales meters. The sonicmore » nozzles and master meter serve as flow-proving and -calibration devices. sonic nozzles are recommended by the turbine-meter standard for meter calibration. This paper examines the performance of on-site calibration of gas turbine meters. The Venice facility successfully demonstrated that on-site calibration of gas-metering devices can ensure accurate gas-flow measurement under field conditions.« less

Assessment of radiological protection systems among diagnostic radiology facilities in North East India.

PubMed

Singh, Thokchom Dewan; Jayaraman, T; Arunkumar Sharma, B

2017-03-01

This study aims to assess the adequacy level of radiological protection systems available in the diagnostic radiology facilities located in three capital cities of North East (NE) India. It further attempts to understand, using a multi-disciplinary approach, how the safety codes/standards in diagnostic radiology framed by the Atomic Energy Regulatory Board (AERB) and the International Atomic Energy Agency (IAEA) to achieve adequate radiological protection in facilities, have been perceived, conceptualized, and applied accordingly in these facilities. About 30 diagnostic radiology facilities were randomly selected from three capitals of states in NE India; namely Imphal (Manipur), Shillong (Meghalaya) and Guwahati (Assam). A semi-structured questionnaire developed based on a multi-disciplinary approach was used for this study. It was observed that radiological practices undertaken in these facilities were not exactly in line with safety codes/standards in diagnostic radiology of the AERB and the IAEA. About 50% of the facilities had registered/licensed x-ray equipment with the AERB. More than 80% of the workers did not use radiation protective devices, although these devices were available in the facilities. About 85% of facilities had no institutional risk management system. About 70% of the facilities did not carry out periodic quality assurance testing of their x-ray equipment or surveys of radiation leakage around the x-ray room, and did not display radiation safety indicators in the x-ray rooms. Workers in these facilities exhibited low risk perception about the risks associated with these practices. The majority of diagnostic radiology facilities in NE India did not comply with the radiological safety codes/standards framed by the AERB and IAEA. The study found inadequate levels of radiological protection systems in the majority of facilities. This study suggests a need to establish firm measures that comply with the radiological safety codes/standards of the AERB and IAEA to protect patients, workers and the public of this region.

Experimental equipment for an advanced ISOL facility[Isotope Separation On-Line Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baktash, C.; Lee, I.Y.; Rehm, K.E.

This report summarizes the proceedings and recommendations of the Workshop on the Experimental Equipment for an Advanced ISOL Facility which was held at Lawrence Berkeley National Laboratory on July 22--25, 1998. The purpose of this workshop was to discuss the performance requirements, manpower and cost estimates, as well as a schedule of the experimental equipment needed to fully exploit the new physics which can be studied at an advanced ISOL facility. An overview of the new physics opportunities that would be provided by such a facility has been presented in the White Paper that was issued following the Columbus Meeting.more » The reactions and experimental techniques discussed in the Columbus White Paper served as a guideline for the formulation of the detector needs at the Berkeley Workshop. As outlined a new ISOL facility with intense, high-quality beams of radioactive nuclei would provide exciting new research opportunities in the areas of: the nature of nucleonic matter; the origin of the elements; and tests of the Standard Model. After an introductory section, the following equipment is discussed: gamma-ray detectors; recoil separators; magnetic spectrographs; particle detectors; targets; and apparatus using non-accelerated beams.« less

Defining modeling parameters for juniper trees assuming pleistocene-like conditions at the NTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarbox, S.R.; Cochran, J.R.

1994-12-31

This paper addresses part of Sandia National Laboratories` (SNL) efforts to assess the long-term performance of the Greater Confinement Disposal (GCD) facility located on the Nevada Test Site (NTS). Of issue is whether the GCD site complies with 40 CFR 191 standards set for transuranic (TRU) waste burial. SNL has developed a radionuclide transport model which can be used to assess TRU radionuclide movement away from the GCD facility. An earlier iteration of the model found that radionuclide uptake and release by plants is an important aspect of the system to consider. Currently, the shallow-rooted plants at the NTS domore » not pose a threat to the integrity of the GCD facility. However, the threat increases substantially it deeper-rooted woodland species migrate to the GCD facility, given a shift to a wetter climate. The model parameters discussed here will be included in the next model iteration which assumes a climate shift will provide for the growth of juniper trees at the GCD facility. Model parameters were developed using published data and wherever possible, data were taken from juniper and pinon-juniper studies that mirrored as many aspects of the GCD facility as possible.« less

Development of Army Facility Functionality Assessment Criteria and Procedures

DTIC Science & Technology

2010-09-01

critical facility types: the Tactical Equipment Main- tenance Facility (TEMF), the Company Operations Facility (COF), the Bat- talion Headquarters...Criteria for Company Operations Facilities (COF) ................ 56 Appendix G: Army Standard Design Criteria for Tactical Equipment Maintenance...1 mission-critical facility types: the Tactical Equipment Mainten- ance Facility (TEMF), the Company Operations Facility (COF), the Batta- lion

Ethylene Oxide Emissions Standards for Sterilization Facilities: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

Learn about the NESHAP for ethylene oxide emissions for sterilization facilities. Find the rule history information, federal register citations, legal authority, and related rules as well as a rule summary.

Provision of family planning services in Tanzania: a comparative analysis of public and private facilities.

PubMed

Kakoko, Deodatus C; Ketting, Evert; Kamazima, Switbert R; Ruben, Ruerd

2012-12-01

Adherence to the policy guidelines and standards is necessary for family planning services. We compared public and private facilities in terms of provision of family planning services. We analyzed data from health facility questionnaire of the 2006 Tanzania Service Provision Assessment survey, based on 529 health facilities. Majority of public facilities (95.4%) offered family planning services, whereas more than half of private facilities (52.1%) did not offer those. Public facilities were more likely to offer modern contraceptives as compared to private facilities. However, private facilities were more likely to offer counseling on natural methods of family planning [AOR = 2.12 (1.15-3.92), P < or = 0.001]. Public facilities were more likely to report having guidelines or protocols for family planning services and various kinds of visual aids for family planning and STIs when compared to private facilities. This comparative analysis entails the need to enforce the standards of family planning services in Tanzania.

40 CFR 60.33b - Emission guidelines for municipal waste combustor metals, acid gases, organics, and nitrogen oxides.

Code of Federal Regulations, 2010 CFR

2010-07-01

... from a designated facility is 400 micrograms per dry standard cubic meter, corrected to 7 percent... discharged to the atmosphere from a designated facility is 27 milligrams per dry standard cubic meter... standard cubic meter, corrected to 7 percent oxygen. (ii) [Reserved] (iii) The emission limit for opacity...

Basics of compounding: considerations for implementing United States pharmacopeia chapter 797 pharmaceutical compounding-sterile preparations, part 16: suggested standard operating procedures.

PubMed

Okeke, Claudia C; Allen, Loyd V

2009-01-01

The standard operating procedures suggested in this article are presented to compounding pharmacies to ensure the quality of the environment in which a CSP is prepared. Since United States Pharmacopeia Chapter 797 provides minimum standards, each facility should aim for best practice gold standard. The standard operating procedures should be tailored to meet the expectations and design of each facility. Compounding personnel are expected to know and understand each standard operating procedure to allow for complete execution of the procedures.

9 CFR 3.51 - Facilities, indoor.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Facilities, indoor. 3.51 Section 3.51... Facilities and Operating Standards § 3.51 Facilities, indoor. (a) Heating. Indoor housing facilities for rabbits need not be heated. (b) Ventilation. Indoor housing facilities for rabbits shall be adequately...

Flat panel display test and evaluation: procedures, standards, and facilities

NASA Astrophysics Data System (ADS)

Jackson, Timothy W.; Daniels, Reginald; Hopper, Darrel G.

1997-07-01

This paper addresses flat panel display test and evaluation via a discussion of procedures, standards and facilities. Procedures need to be carefully developed and documented to ensure that test accomplished in separate laboratories produce comparable results. The tests themselves must not be a source of inconsistency in test results when such comparisons are made in the course of procurements or new technology prototype evaluations. Standards are necessary to expedite the transition of the new display technologies into applications and to lower the costs of custom parts applied across disparate applications. The flat panel display industry is in the course of ascertaining and formulating such standards as they are of value to designers, manufacturers, marketers and users of civil and military products and equipment. Additionally, in order to inform the DoD and industry, the test and evaluation facilities of the Air Force Research Laboratory Displays Branch are described. These facilities are available to support procurements involving flat panel displays and to examine new technology prototypes. Finally, other government display testing facilities within the Navy and the Army are described.

Economic analysis of effluent limitation guidelines and standards for the centralized waste treatment industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wheeler, W.

1998-12-01

This report estimates the economic and financial effects and the benefits of compliance with the proposed effluent limitations guidelines and standards for the Centralized Waste Treatment (CWT) industry. The Environmental Protection Agency (EPA) has measured these impacts in terms of changes in the profitability of waste treatment operations at CWT facilities, changes in market prices to CWT services, and changes in the quantities of waste management at CWT facilities in six geographic regions. EPA has also examined the impacts on companies owning CWT facilities (including impacts on small entities), on communities in which CWT facilities are located, and on environmentalmore » justice. EPA examined the benefits to society of the CWT effluent limitations guidelines and standards by examining cancer and non-cancer health effects of the regulation, recreational benefits, and cost savings to publicly owned treatment works (POTWs) to which indirect-discharging CWT facilities send their wastewater.« less

The food and beverage vending environment in health care facilities participating in the healthy eating, active communities program.

PubMed

Lawrence, Sally; Boyle, Maria; Craypo, Lisa; Samuels, Sarah

2009-06-01

Little has been done to ensure that the foods sold within health care facilities promote healthy lifestyles. Policies to improve school nutrition environments can serve as models for health care organizations. This study was designed to assess the healthfulness of foods sold in health care facility vending machines as well as how health care organizations are using policies to create healthy food environments. Food and beverage assessments were conducted in 19 California health care facilities that serve children in the Healthy Eating, Active Communities sites. Items sold in vending machines were inventoried at each facility and interviews conducted for information on vending policies. Analyses examined the types of products sold and the healthfulness of these products. Ninety-six vending machines were observed in 15 (79%) of the facilities. Hospitals averaged 9.3 vending machines per facility compared with 3 vending machines per health department and 1.4 per clinic. Sodas comprised the greatest percentage of all beverages offered for sale: 30% in hospital vending machines and 38% in clinic vending machines. Water (20%) was the most prevalent in health departments. Candy comprised the greatest percentage of all foods offered in vending machines: 31% in clinics, 24% in hospitals, and 20% in health department facilities. Across all facilities, 75% of beverages and 81% of foods sold in vending machines did not adhere to the California school nutrition standards (Senate Bill 12). Nine (47%) of the health care facilities had adopted, or were in the process of adopting, policies that set nutrition standards for vending machines. According to the California school nutrition standards, the majority of items found in the vending machines in participating health care facilities were unhealthy. Consumption of sweetened beverages and high-energy-density foods has been linked to increased prevalence of obesity. Some health care facilities are developing policies that set nutrition standards for vending machines. These policies could be effective in increasing access to healthy foods and beverages in institutional settings.

Extended tensile testing of welded joints of polyethylene pipes

NASA Astrophysics Data System (ADS)

Danzanova, E. V.; Gerasimov, A. I.; Botvin, G. V.

2017-12-01

The paper introduces the results of testing joints welded in the open air at low climatic temperatures (below minus 15 °C) without heated facilities. Extended tensile testing in an active medium reveals that the same quality standard of welded joints is reached when welded parts are preheated when welding is performed under conditions of low climatic temperatures, and when they are welded at permissible temperatures.

Quantitative Voxel-to-Voxel Comparison of TriBeam and DCT Strontium Titanate Three-Dimensional Data Sets (Postprint)

DTIC Science & Technology

2015-02-09

Peter Gumbsch Karlsruhe Institute of Technology Melanie Syha European Synchrotron Radiation Facility Peter Gumbsch Fraunhofer IWM 9...REPORT DOCUMENTATION PAGE Cont’d 6. AUTHOR(S) 3) Melanie Syha - ESRF 4) Peter Gumbsch - Fraunhofer IWM 7. PERFORMING ORGANIZATION NAME(S...4) Fraunhofer IWM , Woelerstr. 11, 79108 Freiburg, Germany Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std

Branched Nerve Allografts to Improve Outcomes in Facial Composite Tissue Transplantation

DTIC Science & Technology

2017-12-01

Ethicon, Inc. Somervile, N.J.). Postoperatively, animals were recovered per standard protocol in the animal care facility.  Experimental Design ...official Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No...a human xenograft with or without oral Tacrolimus. Electrophysiologic assessments were performed pre -operatively and at the study endpoint (24 weeks

An enhanced rate-based emission trading program for NOX: the Dutch model.

PubMed

Sholtz, A M; Van Amburg, B; Wochnick, V K

2001-12-01

Since 1997 government and industry in The Netherlands have been engaged in intensive policy discussions on how to design an emission trading program that would satisfy the Government's policy objectives within the national and international regulatory framework and accommodate industry's need for a flexible and cost-effective approach. Early on in the discussion the most promising solution was a rate-based approach, which dynamically allocated saleable emission credits based on a performance standard rate and actual energy used by facilities. All industrial facilities above a threshold of 20 MWth would be judged on their ability to meet this performance rate. Those "cleaner" than the standard can sell excess credits to others with an allocation that is less than their actual NOX emission. With some changes in law, such a design could be made to fit well into the national and EU legislative framework while at the same time uniquely meeting industry's requirement of flexibility toward economic growth and facility expansion. (An analysis of the legislative changes required will be given in a separate paper by Chris Dekkers.) However, the environmental outcome of such a system is not as certain as under an absolute emission cap. At the request of the Netherlands Ministry of Housing, Spatial Planning and the Environment (VROM), Automated Credit Exchange (ACE), in close cooperation with the working group of government and industry representatives introduced a number of features into the Dutch NOX program allowing full exploitation of market mechanisms while allowing intermediate adjustments in the performance standard rates. The design is geared toward meeting environmental targets without jeopardizing the trading market the program intends to create. The paper discusses the genesis of the two-tier credit system ACE helped to design, explains the differences between primary (fixed) and secondary (variable) credits, and outlines how the Dutch system is expected to function once implemented in 2004. The paper also discusses the market trading simulation held in early 2001 to assess and test the trading program, and reviews also the current status of the market program development.

Natural phenomena hazards design and evaluation criteria for Department of Energy Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-01-01

The Department of Energy (DOE) has issued an Order 420.1 which establishes policy for its facilities in the event of natural phenomena hazards (NPH) along with associated NPH mitigation requirements. This DOE Standard gives design and evaluation criteria for NPH effects as guidance for implementing the NPH mitigation requirements of DOE Order 420.1 and the associated implementation Guides. These are intended to be consistent design and evaluation criteria for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of these criteria is to assure that DOE facilities can withstand the effects of natural phenomena suchmore » as earthquakes, extreme winds, tornadoes, and flooding. These criteria apply to the design of new facilities and the evaluation of existing facilities. They may also be used for modification and upgrading of existing facilities as appropriate. The design and evaluation criteria presented herein control the level of conservatism introduced in the design/evaluation process such that earthquake, wind, and flood hazards are treated on a consistent basis. These criteria also employ a graded approach to ensure that the level of conservatism and rigor in design/evaluation is appropriate for facility characteristics such as importance, hazards to people on and off site, and threat to the environment. For each natural phenomena hazard covered, these criteria consist of the following: Performance Categories and target performance goals as specified in the DOE Order 420.1 NPH Implementation Guide, and DOE-STD-1 021; specified probability levels from which natural phenomena hazard loading on structures, equipment, and systems is developed; and design and evaluation procedures to evaluate response to NPH loads and criteria to assess whether or not computed response is permissible.« less

Characterization and Uncertainty Analysis of a Reference Pressure Measurement System for Wind Tunnels

NASA Technical Reports Server (NTRS)

Amer, Tahani; Tripp, John; Tcheng, Ping; Burkett, Cecil; Sealey, Bradley

2004-01-01

This paper presents the calibration results and uncertainty analysis of a high-precision reference pressure measurement system currently used in wind tunnels at the NASA Langley Research Center (LaRC). Sensors, calibration standards, and measurement instruments are subject to errors due to aging, drift with time, environment effects, transportation, the mathematical model, the calibration experimental design, and other factors. Errors occur at every link in the chain of measurements and data reduction from the sensor to the final computed results. At each link of the chain, bias and precision uncertainties must be separately estimated for facility use, and are combined to produce overall calibration and prediction confidence intervals for the instrument, typically at a 95% confidence level. The uncertainty analysis and calibration experimental designs used herein, based on techniques developed at LaRC, employ replicated experimental designs for efficiency, separate estimation of bias and precision uncertainties, and detection of significant parameter drift with time. Final results, including calibration confidence intervals and prediction intervals given as functions of the applied inputs, not as a fixed percentage of the full-scale value are presented. System uncertainties are propagated beginning with the initial reference pressure standard, to the calibrated instrument as a working standard in the facility. Among the several parameters that can affect the overall results are operating temperature, atmospheric pressure, humidity, and facility vibration. Effects of factors such as initial zeroing and temperature are investigated. The effects of the identified parameters on system performance and accuracy are discussed.

Cold Climate Foundation Retrofit Experimental Hygrothermal Performance. Cloquet Residential Research Facility Laboratory Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldberg, Louise F.; Harmon, Anna C.

2015-04-09

This project was funded jointly by the National Renewable Energy Laboratory (NREL) and Oak Ridge National Laboratory (ORNL). ORNL focused on developing a full basement wall system experimental database to enable others to validate hygrothermal simulation codes. NREL focused on testing the moisture durability of practical basement wall interior insulation retrofit solutions for cold climates. The project has produced a physically credible and reliable long-term hygrothermal performance database for retrofit foundation wall insulation systems in zone 6 and 7 climates that are fully compliant with the performance criteria in the 2009 Minnesota Energy Code. These data currently span the periodmore » from November 10, 2012 through May 31, 2014 and are anticipated to be extended through November 2014. The experimental data were configured into a standard format that can be published online and that is compatible with standard commercially available spreadsheet and database software.« less

Lightning and surge protection, grounding, bonding and shielding requirements for facilities and electronic equipment

DOT National Transportation Integrated Search

2002-08-09

This document mandates standard lightning protection, transient protection, electrostatic discharge (ESD), grounding, bonding and shielding configurations and procedures for new facilities, facility modifications, facility up grades, new equipment in...

Probability-Based Design Criteria of the ASCE 7 Tsunami Loads and Effects Provisions (Invited)

NASA Astrophysics Data System (ADS)

Chock, G.

2013-12-01

Mitigation of tsunami risk requires a combination of emergency preparedness for evacuation in addition to providing structural resilience of critical facilities, infrastructure, and key resources necessary for immediate response and economic and social recovery. Critical facilities would include emergency response, medical, tsunami refuges and shelters, ports and harbors, lifelines, transportation, telecommunications, power, financial institutions, and major industrial/commercial facilities. The Tsunami Loads and Effects Subcommittee of the ASCE/SEI 7 Standards Committee is developing a proposed new Chapter 6 - Tsunami Loads and Effects for the 2016 edition of the ASCE 7 Standard. ASCE 7 provides the minimum design loads and requirements for structures subject to building codes such as the International Building Code utilized in the USA. In this paper we will provide a review emphasizing the intent of these new code provisions and explain the design methodology. The ASCE 7 provisions for Tsunami Loads and Effects enables a set of analysis and design methodologies that are consistent with performance-based engineering based on probabilistic criteria. . The ASCE 7 Tsunami Loads and Effects chapter will be initially applicable only to the states of Alaska, Washington, Oregon, California, and Hawaii. Ground shaking effects and subsidence from a preceding local offshore Maximum Considered Earthquake will also be considered prior to tsunami arrival for Alaska and states in the Pacific Northwest regions governed by nearby offshore subduction earthquakes. For national tsunami design provisions to achieve a consistent reliability standard of structural performance for community resilience, a new generation of tsunami inundation hazard maps for design is required. The lesson of recent tsunami is that historical records alone do not provide a sufficient measure of the potential heights of future tsunamis. Engineering design must consider the occurrence of events greater than scenarios in the historical record, and should properly be based on the underlying seismicity of subduction zones. Therefore, Probabilistic Tsunami Hazard Analysis (PTHA) consistent with source seismicity must be performed in addition to consideration of historical event scenarios. A method of Probabilistic Tsunami Hazard Analysis has been established that is generally consistent with Probabilistic Seismic Hazard Analysis in the treatment of uncertainty. These new tsunami design zone maps will define the coastal zones where structures of greater importance would be designed for tsunami resistance and community resilience. Structural member acceptability criteria will be based on performance objectives for a 2,500-year Maximum Considered Tsunami. The approach developed by the ASCE Tsunami Loads and Effects Subcommittee of the ASCE 7 Standard would result in the first national unification of tsunami hazard criteria for design codes reflecting the modern approach of Performance-Based Engineering.

Evaluation of a quality improvement intervention to prevent mother-to-child transmission of HIV (PMTCT) at Zambia defence force facilities.

PubMed

Kim, Young Mi; Chilila, Maureen; Shasulwe, Hildah; Banda, Joseph; Kanjipite, Webby; Sarkar, Supriya; Bazant, Eva; Hiner, Cyndi; Tholandi, Maya; Reinhardt, Stephanie; Mulilo, Joyce Chongo; Kols, Adrienne

2013-09-08

The Zambian Defence Force (ZDF) is working to improve the quality of services to prevent mother-to-child transmission of HIV (PMTCT) at its health facilities. This study evaluates the impact of an intervention that included provider training, supportive supervision, detailed performance standards, repeated assessments of service quality, and task shifting of group education to lay workers. Four ZDF facilities implementing the intervention were matched with four comparison sites. Assessors visited the sites before and after the intervention and completed checklists while observing 387 antenatal care (ANC) consultations and 41 group education sessions. A checklist was used to observe facilities' infrastructure and support systems. Bivariate and multivariate analyses were conducted of findings on provider performance during consultations. Among 137 women observed during their initial ANC visit, 52% came during the first 20 weeks of pregnancy, but 19% waited until the 28th week or later. Overall scores for providers' PMTCT skills rose from 58% at baseline to 73% at endline (p=0.003) at intervention sites, but remained stable at 52% at comparison sites. Especially large gains were seen at intervention sites in family planning counseling (34% to 75%, p=0.026), HIV testing during return visits (13% to 48%, p=0.034), and HIV/AIDS management during visits that did not include an HIV test (1% to 34%, p=0.004). Overall scores for providers' ANC skills rose from 67% to 74% at intervention sites, but declined from 65% to 59% at comparison sites; neither change was significant in the multivariate analysis. Overall scores for group education rose from 87% to 91% at intervention sites and declined from 78% to 57% at comparison sites. The overall facility readiness score rose from 73% to 88% at intervention sites and from 75% to 82% at comparison sites. These findings are relevant to civilian as well as military health systems in Zambia because the two are closely coordinated. Lessons learned include: the ability of detailed performance standards to draw attention to and strengthen areas of weakness; the benefits of training lay workers to take over non-clinical PMTCT tasks; and the need to encourage pregnant women to seek ANC early.

Is bigger better? Driving factors of POTW performance in New York.

PubMed

Rahm, Brian G; Morse, Natalie; Bowen, Michelle; Choi, Jun; Mehta, Dhaval; Vedachalam, Sridhar

2018-05-15

Like many regions around the world, New York State, USA, faces challenges in meeting wastewater treatment quality standards because of aging infrastructure, limited funding, shifting demographics and increasingly stringent environmental regulations. In recent decades construction of new wastewater treatment and distribution infrastructure in NY has most often occurred in exurban communities and suburban developments that are less dense than traditional urban cores. Here, we examine the role of size and capacity utilization on wastewater treatment effectiveness with respect to critical effluent parameters, and additionally explore which common facility engineering controls influence water quality treatment using a unique dataset of descriptive information. Our results challenge conventional wisdom, suggesting that the largest facilities (>30,000 m 3 /d), not the smallest (<300 m 3 /d), discharge TSS, BOD, and coliform at significantly higher relative effluent concentrations (i.e., the ratio of discharged concentrations to allowable limits). Capacity utilization was also positively correlated to higher concentrations of TSS, BOD, and coliform effluent concentrations in larger facilities, though those concentrations were often within regulated limits. This implies that smaller-sized facilities may perform better in terms of environmental quality, but that the largest facilities demonstrate efficiency in the sense that they are not "over-treating" wastewater while avoiding violations. Results from NY suggest that medium sized facilities (300-30,000 m 3 /d) are sophisticated enough to incorporate appropriate unit processes, and employ operators with sufficient training and oversight, to reach treatment outcomes that are both reliable and of high quality. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluation of the 235 U resonance parameters to fit the standard recommended values

DOE PAGES

Leal, Luiz; Noguere, Gilles; Paradela, Carlos; ...

2017-09-13

A great deal of effort has been dedicated to the revision of the standard values in connection with the neutron interaction for some actinides. While standard data compilation are available for decades nuclear data evaluations included in existing nuclear data libraries (ENDF, JEFF, JENDL, etc.) do not follow the standard recommended values. Indeed, the majority of evaluations for major actinides do not conform to the standards whatsoever. In particular, for the n + 235U interaction the only value in agreement with the standard is the thermal fission cross section. We performed a resonance re-evaluation of the n + 235U interactionmore » in order to address the issues regarding standard values in the energy range from 10-5 eV to 2250 eV. Recently, 235U fission cross-section measurements have been performed at the CERN Neutron Time-o-Flight facility (TOF), known as n_TOF, in the energy range from 0.7 eV to 10 keV. The data were normalized according to the recommended standard of the fission integral in the energy range 7.8 eV to 11 eV. As a result, the n_TOF averaged fission cross sections above 100 eV are in good agreement with the standard recommended values. The n_TOF data were included in the 235U resonance analysis that was performed with the code SAMMY. In addition to the average standard values related to the fission cross section, standard thermal values for fission, capture, and elastic cross sections were also included in the evaluation. Our paper presents the procedure used for re-evaluating the 235U resonance parameters including the recommended standard values as well as new cross section measurements.« less

Evaluation of the 235 U resonance parameters to fit the standard recommended values

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leal, Luiz; Noguere, Gilles; Paradela, Carlos

A great deal of effort has been dedicated to the revision of the standard values in connection with the neutron interaction for some actinides. While standard data compilation are available for decades nuclear data evaluations included in existing nuclear data libraries (ENDF, JEFF, JENDL, etc.) do not follow the standard recommended values. Indeed, the majority of evaluations for major actinides do not conform to the standards whatsoever. In particular, for the n + 235U interaction the only value in agreement with the standard is the thermal fission cross section. We performed a resonance re-evaluation of the n + 235U interactionmore » in order to address the issues regarding standard values in the energy range from 10-5 eV to 2250 eV. Recently, 235U fission cross-section measurements have been performed at the CERN Neutron Time-o-Flight facility (TOF), known as n_TOF, in the energy range from 0.7 eV to 10 keV. The data were normalized according to the recommended standard of the fission integral in the energy range 7.8 eV to 11 eV. As a result, the n_TOF averaged fission cross sections above 100 eV are in good agreement with the standard recommended values. The n_TOF data were included in the 235U resonance analysis that was performed with the code SAMMY. In addition to the average standard values related to the fission cross section, standard thermal values for fission, capture, and elastic cross sections were also included in the evaluation. Our paper presents the procedure used for re-evaluating the 235U resonance parameters including the recommended standard values as well as new cross section measurements.« less

Evaluation of the 235U resonance parameters to fit the standard recommended values

NASA Astrophysics Data System (ADS)

Leal, Luiz; Noguere, Gilles; Paradela, Carlos; Durán, Ignacio; Tassan-Got, Laurent; Danon, Yaron; Jandel, Marian

2017-09-01

A great deal of effort has been dedicated to the revision of the standard values in connection with the neutron interaction for some actinides. While standard data compilation are available for decades nuclear data evaluations included in existing nuclear data libraries (ENDF, JEFF, JENDL, etc.) do not follow the standard recommended values. Indeed, the majority of evaluations for major actinides do not conform to the standards whatsoever. In particular, for the n + 235U interaction the only value in agreement with the standard is the thermal fission cross section. A resonance re-evaluation of the n + 235U interaction has been performed to address the issues regarding standard values in the energy range from 10-5 eV to 2250 eV. Recently, 235U fission cross-section measurements have been performed at the CERN Neutron Time-of-Flight facility (TOF), known as n_TOF, in the energy range from 0.7 eV to 10 keV. The data were normalized according to the recommended standard of the fission integral in the energy range 7.8 eV to 11 eV. As a result, the n_TOF averaged fission cross sections above 100 eV are in good agreement with the standard recommended values. The n_TOF data were included in the 235U resonance analysis that was performed with the code SAMMY. In addition to the average standard values related to the fission cross section, standard thermal values for fission, capture, and elastic cross sections were also included in the evaluation. This paper presents the procedure used for re-evaluating the 235U resonance parameters including the recommended standard values as well as new cross section measurements.

Can India’s primary care facilities deliver? A cross-sectional assessment of the Indian public health system’s capacity for basic delivery and newborn services

PubMed Central

Leslie, Hannah H; Regan, Mathilda; Nambiar, Devaki; Kruk, Margaret E

2018-01-01

Objectives To assess input and process capacity for basic delivery and newborn (intrapartum care hereafter) care in the Indian public health system and to describe differences in facility capacity between rural and urban areas and across states. Design Cross-sectional study. Setting Data from the nationally representative 2012–2014 District Level Household and Facility Survey, which includes a census of community health centres (CHC) and sample of primary health centres (PHC) across 30 states and union territories in India. Participants 8536 PHCs and 4810 CHCs. Outcome measures We developed a summative index of 33 structural and process capacity items matching the Indian Public Health Standards for PHCs as a metric of minimum facility capacity for intrapartum care. We assessed differences in performance on this index across facility type and location. Results About 30% of PHCs and 5% of CHCs reported not offering any intrapartum care. Among those offering services, volumes were low: median monthly delivery volume was 8 (IQR=13) in PHCs and 41 (IQR=73) in CHCs. Both PHCs and CHCs failed to meet the national standards for basic intrapartum care capacity. Mean facility capacity was low in PHCs in both urban (0.64) and rural (0.63) areas, while in CHCs, capacity was slightly higher in urban areas (0.77vs0.74). Gaps were most striking in availability of skilled human resources and emergency obstetric services. Poor capacity facilities were more concentrated in the more impoverished states, with 37% of districts from these states receiving scores in the lowest third of the facility capacity index (<0.70), compared with 21% of districts otherwise. Conclusions Basic intrapartum care capacity in Indian public primary care facilities is weak in both rural and urban areas, especially lacking in the poorest states with worst health outcomes. Improving maternal and newborn health outcomes will require focused attention to quality measurement, accountability mechanisms and quality improvement. Policies to address deficits in skilled providers and emergency service availability are urgently required. PMID:29866726

Can India's primary care facilities deliver? A cross-sectional assessment of the Indian public health system's capacity for basic delivery and newborn services.

PubMed

Sharma, Jigyasa; Leslie, Hannah H; Regan, Mathilda; Nambiar, Devaki; Kruk, Margaret E

2018-06-04

To assess input and process capacity for basic delivery and newborn (intrapartum care hereafter) care in the Indian public health system and to describe differences in facility capacity between rural and urban areas and across states. Cross-sectional study. Data from the nationally representative 2012-2014 District Level Household and Facility Survey, which includes a census of community health centres (CHC) and sample of primary health centres (PHC) across 30 states and union territories in India. 8536 PHCs and 4810 CHCs. We developed a summative index of 33 structural and process capacity items matching the Indian Public Health Standards for PHCs as a metric of minimum facility capacity for intrapartum care. We assessed differences in performance on this index across facility type and location. About 30% of PHCs and 5% of CHCs reported not offering any intrapartum care. Among those offering services, volumes were low: median monthly delivery volume was 8 (IQR=13) in PHCs and 41 (IQR=73) in CHCs. Both PHCs and CHCs failed to meet the national standards for basic intrapartum care capacity. Mean facility capacity was low in PHCs in both urban (0.64) and rural (0.63) areas, while in CHCs, capacity was slightly higher in urban areas (0.77vs0.74). Gaps were most striking in availability of skilled human resources and emergency obstetric services. Poor capacity facilities were more concentrated in the more impoverished states, with 37% of districts from these states receiving scores in the lowest third of the facility capacity index (<0.70), compared with 21% of districts otherwise. Basic intrapartum care capacity in Indian public primary care facilities is weak in both rural and urban areas, especially lacking in the poorest states with worst health outcomes. Improving maternal and newborn health outcomes will require focused attention to quality measurement, accountability mechanisms and quality improvement. Policies to address deficits in skilled providers and emergency service availability are urgently required. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Current Realities of Delivering Mammography Services in the Community: Do Challenges with Staffing and Scheduling Exist?

PubMed Central

D'Orsi, Carl; Tu, Shin-Ping; Nakano, Connie; Carney, Patricia A.; Abraham, Linn A.; Taplin, Stephen H.; Hendrick, R. Edward; Cutter, Gary R.; Berns, Eric; Barlow, William E.; Elmore, Joann G.

2011-01-01

PURPOSE To evaluate the current (2001–2002) capacity of community-based mammography facilities to deliver screening and diagnostic services in the United States. MATERIALS AND METHODS Institutional review board approvals and patient consent were obtained. A mailed survey was sent to 53 eligible mammography facilities in three states (Washington, New Hampshire, and Colorado). Survey questions assessed equipment and staffing availability, as well as appointment waiting times for screening and diagnostic mammography services. Criterion-related content and construct validity were obtained first by means of a national advisory committee of academic, scientific, and clinical colleagues in mammography that reviewed literature on existing surveys and second by pilot testing a series of draft surveys among community mammography facilities not inclusive of the study facilities. The final survey results were independently double entered into a relational database with programmed data checks. The data were sent encrypted by means of file transfer protocol to a central analytical center at Group Health Cooperative. A two-sided P value with α = .05 was considered to show statistical significance in all analyses. RESULTS Forty-five of 53 eligible mammography facilities (85%) returned the survey. Shortages of radiologists relative to the mammographic volume were found in 44% of mammography facilities overall, with shortages of radiologists higher in not-for-profit versus for-profit facilities (60% vs 28% reported). Shortages of Mammography Quality Standards Act–qualified technologists were reported by 20% of facilities, with 46% reporting some level of difficulty in maintaining qualified technologists. Waiting times for diagnostic mammography ranged from less than 1 week to 4 weeks, with 85% performed within 1 week. Waiting times for screening mammography ranged from less than 1 week to 8 weeks, with 59% performed between 1 week and 4 weeks. Waiting times for both diagnostic and screening services were two to three times higher in high-volume compared with low-volume facilities. CONCLUSION Survey results show shortages of radiologists and certified mammography technologists. PMID:15798153

METAL MEDIA FILTERS, AG-1 SECTION FI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adamson, D.

One application of metal media filters is in various nuclear air cleaning processes including applications for protecting workers, the public and the environment from hazardous and radioactive particles. To support this application the development of the ASME AG-1 FI Standard on Metal Media has been under way for more than ten years. Development of the proposed section has required resolving several difficult issues associated with operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality acceptance testing. Performance characteristics of metal media are dramatically different than the glass fiber media with respect to parameters like differential pressures, operating temperatures,more » media strength, etc. These differences make existing data for a glass fiber media inadequate for qualifying a metal media filter for AG-1. In the past much work has been conducted on metal media filters at facilities such as Lawrence Livermore National Laboratory (LLNL) and Savannah River National Laboratory (SRNL) to qualify the media as High Efficiency Particulate Air (HEPA) Filters. Particle retention testing has been conducted at Oak Ridge Filter Test Facility and at Air Techniques International (ATI) to prove that the metal media meets or exceeds the 99.97% particle retention required for a HEPA Filter. Even with his testing, data was lacking to complete an AG-1 FI Standard on metal media. With funding secured by Mississippi State University (MSU) from National Nuclear Security Administration (NNSA), a research test stand is being designed and fabricated at MSU's Institute for Clean Energy Technology (ICET) Facility to obtain qualification data on metal media. This in turn will support required data needed for the FI Standard. The paper will discuss in detail how the test stand at MSU will obtain the necessary data to complete the FI Standard.« less

Modelling the cost-effectiveness of impact-absorbing flooring in Swedish residential care facilities.

PubMed

Ryen, Linda; Svensson, Mikael

2016-06-01

Fall-related injuries among the elderly, specifically hip fractures, cause significant morbidity and mortality as well as imposing a substantial financial cost on the health care system. Impact-absorbing flooring has been advocated as an effective method for preventing hip fractures resulting from falls. This study identifies the cost-effectiveness of impact-absorbing flooring compared to standard flooring in residential care facilities for the elderly in a Swedish setting. An incremental cost-effectiveness analysis was performed comparing impact-absorbing flooring to standard flooring using a Markov decision model. A societal perspective was adopted and incremental costs were compared to incremental gains in quality-adjusted life years (QALYs). Data on costs, probability transitions and health-related quality of life measures were retrieved from the published literature and from Swedish register data. Probabilistic sensitivity analysis was performed through a Monte Carlo simulation. The base-case analysis indicates that the impact-absorbing flooring reduces costs and increases QALYs. When allowing for uncertainty we find that 60% of the simulations indicate that impact-absorbing flooring is cost-saving compared to standard flooring and an additional 20% that it has a cost per QALY below a commonly used threshold value : Using a modelling approach, we find that impact-absorbing flooring is a dominant strategy at the societal level considering that it can save resources and improve health in a vulnerable population. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Environmentally-Preferable Launch Coatings

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2015-01-01

The Ground Systems Development and Operations (GSDO) Program at NASA Kennedy Space Center (KSC), Florida, has the primary objective of modernizing and transforming the launch and range complex at KSC to benefit current and future NASA programs along with other emerging users. Described as the launch support and infrastructure modernization program in the NASA Authorization Act of 2010, the GSDO Program will develop and implement shared infrastructure and process improvements to provide more flexible, affordable, and responsive capabilities to a multi-user community. In support of NASA and the GSDO Program, the objective of this project is to determine the feasibility of environmentally friendly corrosion protecting coatings for launch facilities and ground support equipment (GSE). The focus of the project is corrosion resistance and survivability with the goal to reduce the amount of maintenance required to preserve the performance of launch facilities while reducing mission risk. The project compares coating performance of the selected alternatives to existing coating systems or standards.

High sensitivity and specificity of clinical microscopy in rural health facilities in western Kenya under an external quality assurance program.

PubMed

Wafula, Rebeccah; Sang, Edna; Cheruiyot, Olympia; Aboto, Angeline; Menya, Diana; O'Meara, Wendy Prudhomme

2014-09-01

Microscopic diagnosis of malaria is a well-established and inexpensive technique that has the potential to provide accurate diagnosis of malaria infection. However, it requires both training and experience. Although it is considered the gold standard in research settings, the sensitivity and specificity of routine microscopy for clinical care in the primary care setting has been reported to be unacceptably low. We established a monthly external quality assurance program to monitor the performance of clinical microscopy in 17 rural health centers in western Kenya. The average sensitivity over the 12-month period was 96% and the average specificity was 88%. We identified specific contextual factors that contributed to inadequate performance. Maintaining high-quality malaria diagnosis in high-volume, resource-constrained health facilities is possible. © The American Society of Tropical Medicine and Hygiene.

LIHE Spectral Dynamics and Jaguar Data Acquisition System Measurement Assurance Results 2014.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covert, Timothy T.; Willis, Michael David; Radtke, Gregg Arthur

2015-06-01

The Light Initiated High Explosive (LIHE) facility performs high rigor, high consequence impulse testing for the nuclear weapons (NW) community. To support the facility mission, LIHE's extensive data acquisition system (DAS) is comprised of several discrete components as well as a fully integrated system. Due to the high consequence and high rigor of the testing performed at LIHE, a measurement assurance plan (MAP) was developed in collaboration with NW system customers to meet their data quality needs and to provide assurance of the robustness of the LIHE DAS. While individual components of the DAS have been calibrated by the SNLmore » Primary Standards Laboratory (PSL), the integrated nature of this complex system requires verification of the complete system, from end-to-end. This measurement assurance plan (MAP) report documents the results of verification and validation procedures used to ensure that the data quality meets customer requirements.« less