Developing a contributing factor classification scheme for Rasmussen's AcciMap: Reliability and validity evaluation.

PubMed

Goode, N; Salmon, P M; Taylor, N Z; Lenné, M G; Finch, C F

2017-10-01

One factor potentially limiting the uptake of Rasmussen's (1997) Accimap method by practitioners is the lack of a contributing factor classification scheme to guide accident analyses. This article evaluates the intra- and inter-rater reliability and criterion-referenced validity of a classification scheme developed to support the use of Accimap by led outdoor activity (LOA) practitioners. The classification scheme has two levels: the system level describes the actors, artefacts and activity context in terms of 14 codes; the descriptor level breaks the system level codes down into 107 specific contributing factors. The study involved 11 LOA practitioners using the scheme on two separate occasions to code a pre-determined list of contributing factors identified from four incident reports. Criterion-referenced validity was assessed by comparing the codes selected by LOA practitioners to those selected by the method creators. Mean intra-rater reliability scores at the system (M = 83.6%) and descriptor (M = 74%) levels were acceptable. Mean inter-rater reliability scores were not consistently acceptable for both coding attempts at the system level (M T1  = 68.8%; M T2  = 73.9%), and were poor at the descriptor level (M T1  = 58.5%; M T2  = 64.1%). Mean criterion referenced validity scores at the system level were acceptable (M T1  = 73.9%; M T2  = 75.3%). However, they were not consistently acceptable at the descriptor level (M T1  = 67.6%; M T2  = 70.8%). Overall, the results indicate that the classification scheme does not currently satisfy reliability and validity requirements, and that further work is required. The implications for the design and development of contributing factors classification schemes are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Teacher Reporting Attitudes Scale (TRAS): confirmatory and exploratory factor analyses with a Malaysian sample.

PubMed

Choo, Wan Yuen; Walsh, Kerryann; Chinna, Karuthan; Tey, Nai Peng

2013-01-01

The Teacher Reporting Attitude Scale (TRAS) is a newly developed tool to assess teachers' attitudes toward reporting child abuse and neglect. This article reports on an investigation of the factor structure and psychometric properties of the short form Malay version of the TRAS. A self-report cross-sectional survey was conducted with 667 teachers in 14 randomly selected schools in Selangor state, Malaysia. Analyses were conducted in a 3-stage process using both confirmatory (stages 1 and 3) and exploratory factor analyses (stage 2) to test, modify, and confirm the underlying factor structure of the TRAS in a non-Western teacher sample. Confirmatory factor analysis did not support a 3-factor model previously reported in the original TRAS study. Exploratory factor analysis revealed an 8-item, 4-factor structure. Further confirmatory factor analysis demonstrated appropriateness of the 4-factor structure. Reliability estimates for the four factors-commitment, value, concern, and confidence-were moderate. The modified short form TRAS (Malay version) has potential to be used as a simple tool for relatively quick assessment of teachers' attitudes toward reporting child abuse and neglect. Cross-cultural differences in attitudes toward reporting may exist and the transferability of newly developed instruments to other populations should be evaluated.

Factor validity and reliability of the aberrant behavior checklist-community (ABC-C) in an Indian population with intellectual disability.

PubMed

Lehotkay, R; Saraswathi Devi, T; Raju, M V R; Bada, P K; Nuti, S; Kempf, N; Carminati, G Galli

2015-03-01

In this study realised in collaboration with the department of psychology and parapsychology of Andhra University, validation of the Aberrant Behavior Checklist-Community (ABC-C) in Telugu, the official language of Andhra Pradesh, one of India's 28 states, was carried out. To assess the factor validity and reliability of this Telugu version, 120 participants with moderate to profound intellectual disability (94 men and 26 women, mean age 25.2, SD 7.1) were rated by the staff of the Lebenshilfe Institution for Mentally Handicapped in Visakhapatnam, Andhra Pradesh, India. Rating data were analysed with a confirmatory factor analysis. The internal consistency was estimated by Cronbach's alpha. To confirm the test-retest reliability, 50 participants were rated twice with an interval of 4 weeks, and 50 were rated by pairs of raters to assess inter-rater reliability. Confirmatory factor analysis revealed that the root mean square error of approximation (RMSEA) was equal to 0.06, the comparative fit index (CFI) was equal to 0.77, and the Tucker Lewis index (TLI) was equal to 0.77, which indicated that the model with five correlated factors had a good fit. Coefficient alpha ranged from 0.85 to 0.92 across the five subscales. Spearman's rank correlation coefficients for inter-rater reliability tests ranged from 0.65 to 0.75, and the correlations for test-retest reliability ranged from 0.58 to 0.76. All reliability coefficients were statistically significant (P < 0.01). The factor validity and reliability of Telugu version of the ABC-C evidenced factor validity and reliability comparable to the original English version and appears to be useful for assessing behaviour disorders in Indian people with intellectual disabilities. © 2014 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Portuguese version of the PTSD Checklist-Military Version (PCL-M)-I: Confirmatory Factor Analysis and reliability.

PubMed

Carvalho, Teresa; Cunha, Marina; Pinto-Gouveia, José; Duarte, Joana

2015-03-30

The PTSD Checklist-Military Version (PCL-M) is a brief self-report instrument widely used to assess Post-traumatic Stress Disorder (PTSD) symptomatology in war Veterans, according to DSM-IV. This study sought out to explore the factor structure and reliability of the Portuguese version of the PCL-M. A sample of 660 Portuguese Colonial War Veterans completed the PCL-M. Several Confirmatory Factor Analyses were conducted to test different structures for PCL-M PTSD symptoms. Although the respecified first-order four-factor model based on King et al.'s model showed the best fit to the data, the respecified first and second-order models based on the DSM-IV symptom clusters also presented an acceptable fit. In addition, the PCL-M showed adequate reliability. The Portuguese version of the PCL-M is thus a valid and reliable measure to assess the severity of PTSD symptoms as described in DSM-IV. Its use with Portuguese Colonial War Veterans may ease screening of possible PTSD cases, promote more suitable treatment planning, and enable monitoring of therapeutic outcomes. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Evaluation of General Classes of Reliability Estimators Often Used in Statistical Analyses of Quasi-Experimental Designs

NASA Astrophysics Data System (ADS)

Saini, K. K.; Sehgal, R. K.; Sethi, B. L.

2008-10-01

In this paper major reliability estimators are analyzed and there comparatively result are discussed. There strengths and weaknesses are evaluated in this case study. Each of the reliability estimators has certain advantages and disadvantages. Inter-rater reliability is one of the best ways to estimate reliability when your measure is an observation. However, it requires multiple raters or observers. As an alternative, you could look at the correlation of ratings of the same single observer repeated on two different occasions. Each of the reliability estimators will give a different value for reliability. In general, the test-retest and inter-rater reliability estimates will be lower in value than the parallel forms and internal consistency ones because they involve measuring at different times or with different raters. Since reliability estimates are often used in statistical analyses of quasi-experimental designs.

Factor Structure, Reliability and Criterion Validity of the Autism-Spectrum Quotient (AQ): A Study in Dutch Population and Patient Groups

PubMed Central

Bartels, Meike; Cath, Danielle C.; Boomsma, Dorret I.

2008-01-01

The factor structure of the Dutch translation of the Autism-Spectrum Quotient (AQ; a continuous, quantitative measure of autistic traits) was evaluated with confirmatory factor analyses in a large general population and student sample. The criterion validity of the AQ was examined in three matched patient groups (autism spectrum conditions (ASC), social anxiety disorder, and obsessive–compulsive disorder). A two factor model, consisting of a “Social interaction” factor and “Attention to detail” factor could be identified. The internal consistency and test–retest reliability of the AQ were satisfactory. High total AQ and factor scores were specific to ASC patients. Men scored higher than women and science students higher than non-science students. The Dutch translation of the AQ is a reliable instrument to assess autism spectrum conditions. PMID:18302013

Universal first-order reliability concept applied to semistatic structures

NASA Technical Reports Server (NTRS)

Verderaime, V.

1994-01-01

A reliability design concept was developed for semistatic structures which combines the prevailing deterministic method with the first-order reliability method. The proposed method surmounts deterministic deficiencies in providing uniformly reliable structures and improved safety audits. It supports risk analyses and reliability selection criterion. The method provides a reliability design factor derived from the reliability criterion which is analogous to the current safety factor for sizing structures and verifying reliability response. The universal first-order reliability method should also be applicable for air and surface vehicles semistatic structures.

Universal first-order reliability concept applied to semistatic structures

NASA Astrophysics Data System (ADS)

Verderaime, V.

1994-07-01

A reliability design concept was developed for semistatic structures which combines the prevailing deterministic method with the first-order reliability method. The proposed method surmounts deterministic deficiencies in providing uniformly reliable structures and improved safety audits. It supports risk analyses and reliability selection criterion. The method provides a reliability design factor derived from the reliability criterion which is analogous to the current safety factor for sizing structures and verifying reliability response. The universal first-order reliability method should also be applicable for air and surface vehicles semistatic structures.

The Anxiety Sensitivity Index--Revised: Confirmatory Factor Analyses, Structural Invariance in Caucasian and African American Samples, and Score Reliability and Validity

ERIC Educational Resources Information Center

Arnau, Randolph C.; Broman-Fulks, Joshua J.; Green, Bradley A.; Berman, Mitchell E.

2009-01-01

The most commonly used measure of anxiety sensitivity is the 36-item Anxiety Sensitivity Index--Revised (ASI-R). Exploratory factor analyses have produced several different factors structures for the ASI-R, but an acceptable fit using confirmatory factor analytic approaches has only been found for a 21-item version of the instrument. We evaluated…

Summary of the analyses for recovery factors

USGS Publications Warehouse

Verma, Mahendra K.

2017-07-17

IntroductionIn order to determine the hydrocarbon potential of oil reservoirs within the U.S. sedimentary basins for which the carbon dioxide enhanced oil recovery (CO2-EOR) process has been considered suitable, the CO2 Prophet model was chosen by the U.S. Geological Survey (USGS) to be the primary source for estimating recovery-factor values for individual reservoirs. The choice was made because of the model’s reliability and the ease with which it can be used to assess a large number of reservoirs. The other two approaches—the empirical decline curve analysis (DCA) method and a review of published literature on CO2-EOR projects—were deployed to verify the results of the CO2 Prophet model. This chapter discusses the results from CO2 Prophet (chapter B, by Emil D. Attanasi, this report) and compares them with results from decline curve analysis (chapter C, by Hossein Jahediesfanjani) and those reported in the literature for selected reservoirs with adequate data for analyses (chapter D, by Ricardo A. Olea).To estimate the technically recoverable hydrocarbon potential for oil reservoirs where CO2-EOR has been applied, two of the three approaches—CO2 Prophet modeling and DCA—do not include analysis of economic factors, while the third approach—review of published literature—implicitly includes economics. For selected reservoirs, DCA has provided estimates of the technically recoverable hydrocarbon volumes, which, in combination with calculated amounts of original oil in place (OOIP), helped establish incremental CO2-EOR recovery factors for individual reservoirs.The review of published technical papers and reports has provided substantial information on recovery factors for 70 CO2-EOR projects that are either commercially profitable or classified as pilot tests. When comparing the results, it is important to bear in mind the differences and limitations of these three approaches.

Factors Influencing the Reliability of the Glasgow Coma Scale: A Systematic Review.

PubMed

Reith, Florence Cm; Synnot, Anneliese; van den Brande, Ruben; Gruen, Russell L; Maas, Andrew Ir

2017-06-01

The Glasgow Coma Scale (GCS) characterizes patients with diminished consciousness. In a recent systematic review, we found overall adequate reliability across different clinical settings, but reliability estimates varied considerably between studies, and methodological quality of studies was overall poor. Identifying and understanding factors that can affect its reliability is important, in order to promote high standards for clinical use of the GCS. The aim of this systematic review was to identify factors that influence reliability and to provide an evidence base for promoting consistent and reliable application of the GCS. A comprehensive literature search was undertaken in MEDLINE, EMBASE, and CINAHL from 1974 to July 2016. Studies assessing the reliability of the GCS in adults or describing any factor that influences reliability were included. Two reviewers independently screened citations, selected full texts, and undertook data extraction and critical appraisal. Methodological quality of studies was evaluated with the consensus-based standards for the selection of health measurement instruments checklist. Data were synthesized narratively and presented in tables. Forty-one studies were included for analysis. Factors identified that may influence reliability are education and training, the level of consciousness, and type of stimuli used. Conflicting results were found for experience of the observer, the pathology causing the reduced consciousness, and intubation/sedation. No clear influence was found for the professional background of observers. Reliability of the GCS is influenced by multiple factors and as such is context dependent. This review points to the potential for improvement from training and education and standardization of assessment methods, for which recommendations are presented. Copyright © 2017 by the Congress of Neurological Surgeons.

Reliability and construct validity of the College Student Stress Scale.

PubMed

Feldt, Ronald C; Koch, Chris

2011-04-01

Reliability and construct validity of the 11-item College Student Stress Scale were investigated with exploratory (N = 273) and confirmatory factor analyses (N = 185) in undergraduate college students. Two factors were observed; however, reliability of the 3-item factor was too low and one item failed to load on either factor. A 7-item measure (Factor 1) had acceptable reliability (.81) and good convergence with the Perceived Stress Scale. This measure was significantly correlated with Neuroticism, Test Anxiety, and Self-efficacy for Learning, but not Social Desirability or age.

Capacity and reliability analyses with applications to power quality

NASA Astrophysics Data System (ADS)

Azam, Mohammad; Tu, Fang; Shlapak, Yuri; Kirubarajan, Thiagalingam; Pattipati, Krishna R.; Karanam, Rajaiah

2001-07-01

The deregulation of energy markets, the ongoing advances in communication networks, the proliferation of intelligent metering and protective power devices, and the standardization of software/hardware interfaces are creating a dramatic shift in the way facilities acquire and utilize information about their power usage. The currently available power management systems gather a vast amount of information in the form of power usage, voltages, currents, and their time-dependent waveforms from a variety of devices (for example, circuit breakers, transformers, energy and power quality meters, protective relays, programmable logic controllers, motor control centers). What is lacking is an information processing and decision support infrastructure to harness this voluminous information into usable operational and management knowledge to handle the health of their equipment and power quality, minimize downtime and outages, and to optimize operations to improve productivity. This paper considers the problem of evaluating the capacity and reliability analyses of power systems with very high availability requirements (e.g., systems providing energy to data centers and communication networks with desired availability of up to 0.9999999). The real-time capacity and margin analysis helps operators to plan for additional loads and to schedule repair/replacement activities. The reliability analysis, based on computationally efficient sum of disjoint products, enables analysts to decide the optimum levels of redundancy, aids operators in prioritizing the maintenance options for a given budget and monitoring the system for capacity margin. The resulting analytical and software tool is demonstrated on a sample data center.

Levee reliability analyses for various flood return periods - a case study in southern Taiwan

NASA Astrophysics Data System (ADS)

Huang, W.-C.; Yu, H.-W.; Weng, M.-C.

2015-04-01

In recent years, heavy rainfall conditions have caused disasters around the world. To prevent losses by floods, levees have often been constructed in inundation-prone areas. This study performed reliability analyses for the Chiuliao First Levee in southern Taiwan. The failure-related parameters were the water level, the scouring depth, and the in situ friction angle. Three major failure mechanisms were considered: the slope sliding failure of the levee and the sliding and overturning failures of the retaining wall. When the variability of the in situ friction angle and the scouring depth are considered for various flood return periods, the variations of the factor of safety for the different failure mechanisms show that the retaining wall sliding and overturning failures are more sensitive to the change of the friction angle. When the flood return period is greater than 2 years, the levee could fail with slope sliding for all values of the water level difference. The results of levee stability analysis considering the variability of different parameters could aid engineers in designing the levee cross sections, especially with potential failure mechanisms in mind.

Initial validation of the Spanish childhood trauma questionnaire-short form: factor structure, reliability and association with parenting.

PubMed

Hernandez, Ana; Gallardo-Pujol, David; Pereda, Noemí; Arntz, Arnoud; Bernstein, David P; Gaviria, Ana M; Labad, Antonio; Valero, Joaquín; Gutiérrez-Zotes, Jose Alfonso

2013-05-01

The present study examines the internal consistency and factor structure of the Spanish version of the Childhood Trauma Questionnaire-Short Form (CTQ-SF) and the association between the CTQ-SF subscales and parenting style. Cronbach's α and confirmatory factor analyses (CFA) were performed in a female clinical sample (n = 185). Kendall's ι correlations were calculated between the maltreatment and parenting scales in a subsample of 109 patients. The Spanish CTQ-SF showed adequate psychometric properties and a good fit of the 5-factor structure. The neglect and abuse scales were negatively associated with parental care and positively associated with overprotection scales. The results of this study provide initial support for the reliability and validity of the Spanish CTQ-SF.

Risk factors for implant failure: a retrospective study in an educational institution using GEE analyses.

PubMed

Borba, Marcelo; Deluiz, Daniel; Lourenço, Eduardo José Veras; Oliveira, Luciano; Tannure, Patrícia Nivoloni

2017-08-21

This study aimed to evaluate dental implant outcomes and to identify risk factors associated with implant failure over 12 years via dental records of patients attending an educational institution. Dental records of 202 patients receiving 774 dental implants from 2002 to 2014 were analyzed by adopting a more reliable statistical method to evaluate risk factors with patients as the unit [generalized estimating equation (GEE)]. Information regarding patient age at implantation, sex, use of tobacco, and history of systemic diseases was collected. Information about implant location in the arch region and implant length, diameter, and placement in a grafted area was evaluated after 2 years under load. Systemic and local risk factors for early and late implant failure were studied. A total of 18 patients experienced 25 implant failures, resulting in an overall survival rate of 96.8% (2.84% and 0.38% early and late implant failures, respectively). The patient-based survival rate was 91.8%. GEE univariate and multivariate analyses revealed that a significant risk factor for implant failure was the maxillary implant (p = 0.006 and p = 0.014, respectively). Bone grafting appeared to be a risk factor for implant failure (p = 0.054). According to GEE analyses, maxillary implants had significantly worse outcomes in this population and were considered to be a risk factor for implant failure. Our results suggested that implants placed in a bone augmentation area had a tendency to fail.

The Nursing Performance Instrument: Exploratory and Confirmatory Factor Analyses in Registered Nurses.

PubMed

Sagherian, Knar; Steege, Linsey M; Geiger-Brown, Jeanne; Harrington, Donna

2018-04-01

The optimal performance of nurses in healthcare settings plays a critical role in care quality and patient safety. Despite this importance, few measures are provided in the literature that evaluate nursing performance as an independent construct from competencies. The nine-item Nursing Performance Instrument (NPI) was developed to fill this gap. The aim of this study was to examine and confirm the underlying factor structure of the NPI in registered nurses. The design was cross-sectional, using secondary data collected between February 2008 and April 2009 for the "Fatigue in Nursing Survey" (N = 797). The sample was predominantly dayshift female nurses working in acute care settings. Using Mplus software, exploratory and confirmatory factor analyses were applied to the NPI data, which were divided into two equal subsamples. Multiple fit indices were used to evaluate the fit of the alternative models. The three-factor model was determined to fit the data adequately. The factors that were labeled as "physical/mental decrements," "consistent practice," and "behavioral change" were moderately to strongly intercorrelated, indicating good convergent validity. The reliability coefficients for the subscales were acceptable. The NPI consists of three latent constructs. This instrument has the potentialto be used as a self-monitoring instrument that addressesnurses' perceptions of performance while providing patient care.

Validating the European Health Literacy Survey Questionnaire in people with type 2 diabetes: Latent trait analyses applying multidimensional Rasch modelling and confirmatory factor analysis.

PubMed

Finbråten, Hanne Søberg; Pettersen, Kjell Sverre; Wilde-Larsson, Bodil; Nordström, Gun; Trollvik, Anne; Guttersrud, Øystein

2017-11-01

To validate the European Health Literacy Survey Questionnaire (HLS-EU-Q47) in people with type 2 diabetes mellitus. The HLS-EU-Q47 latent variable is outlined in a framework with four cognitive domains integrated in three health domains, implying 12 theoretically defined subscales. Valid and reliable health literacy measurers are crucial to effectively adapt health communication and education to individuals and groups of patients. Cross-sectional study applying confirmatory latent trait analyses. Using a paper-and-pencil self-administered approach, 388 adults responded in March 2015. The data were analysed using the Rasch methodology and confirmatory factor analysis. Response violation (response dependency) and trait violation (multidimensionality) of local independence were identified. Fitting the "multidimensional random coefficients multinomial logit" model, 1-, 3- and 12-dimensional Rasch models were applied and compared. Poor model fit and differential item functioning were present in some items, and several subscales suffered from poor targeting and low reliability. Despite multidimensional data, we did not observe any unordered response categories. Interpreting the domains as distinct but related latent dimensions, the data fit a 12-dimensional Rasch model and a 12-factor confirmatory factor model best. Therefore, the analyses did not support the estimation of one overall "health literacy score." To support the plausibility of claims based on the HLS-EU score(s), we suggest: removing the health care aspect to reduce the magnitude of multidimensionality; rejecting redundant items to avoid response dependency; adding "harder" items and applying a six-point rating scale to improve subscale targeting and reliability; and revising items to improve model fit and avoid bias owing to person factors. © 2017 John Wiley & Sons Ltd.

A System for Integrated Reliability and Safety Analyses

NASA Technical Reports Server (NTRS)

Kostiuk, Peter; Shapiro, Gerald; Hanson, Dave; Kolitz, Stephan; Leong, Frank; Rosch, Gene; Coumeri, Marc; Scheidler, Peter, Jr.; Bonesteel, Charles

1999-01-01

We present an integrated reliability and aviation safety analysis tool. The reliability models for selected infrastructure components of the air traffic control system are described. The results of this model are used to evaluate the likelihood of seeing outcomes predicted by simulations with failures injected. We discuss the design of the simulation model, and the user interface to the integrated toolset.

Levee reliability analyses for various flood return periods - a case study in Southern Taiwan

NASA Astrophysics Data System (ADS)

Huang, W.-C.; Yu, H.-W.; Weng, M.-C.

2015-01-01

In recent years, heavy rainfall conditions have caused damages around the world. To prevent damages by floods, levees have often been constructed in prone-to-inundation areas. This study performed reliability analyses for the Chiuliao 1st Levee located in southern Taiwan. The failure-related parameters were the water level, the scouring depth, and the in-situ friction angle. Three major failure mechanisms were considered, including the slope sliding failure of the levee, and the sliding and overturning failures of the retaining wall. When the variabilities of the in-situ friction angle and the scouring depth are considered for various flood return periods, the variations of the factor of safety (FS) for the different failure mechanisms show that the retaining wall sliding and overturning failures are more sensitive to the variability of the friction angle. When the flood return period is greater than 2 years, the levee can undergo slope sliding failure for all values of the water level difference. The results for levee stability analysis considering the variability of different parameters could assist engineers in designing the levee cross sections, especially with potential failure mechanisms in mind.

Structural Analyses of Stirling Power Convertor Heater Head for Long-Term Reliability, Durability, and Performance

NASA Technical Reports Server (NTRS)

Halford, Gary R.; Shah, Ashwin; Arya, Vinod K.; Krause, David L.; Bartolotta, Paul A.

2002-01-01

Deep-space missions require onboard electric power systems with reliable design lifetimes of up to 10 yr and beyond. A high-efficiency Stirling radioisotope power system is a likely candidate for future deep-space missions and Mars rover applications. To ensure ample durability, the structurally critical heater head of the Stirling power convertor has undergone extensive computational analyses of operating temperatures (up to 650 C), stresses, and creep resistance of the thin-walled Inconel 718 bill of material. Durability predictions are presented in terms of the probability of survival. A benchmark structural testing program has commenced to support the analyses. This report presents the current status of durability assessments.

Reliability, Validity, and Factor Structure of the Imaginative Capability Scale

ERIC Educational Resources Information Center

Liang, Chaoyun; Chia, Tsorng-Lin

2014-01-01

Three studies were combined to test the reliability, validity, and factor structure of the imaginative capability scale (ICS). The ICS was a new self-report measure, which was developed to be empirically valid and easy to administer. Study 1 consisted in an exploratory factor analysis to determine the most appropriate structure of the ICS in a…

Reliability of IGBT in a STATCOM for Harmonic Compensation and Power Factor Correction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gopi Reddy, Lakshmi Reddy; Tolbert, Leon M; Ozpineci, Burak

With smart grid integration, there is a need to characterize reliability of a power system by including reliability of power semiconductors in grid related applications. In this paper, the reliability of IGBTs in a STATCOM application is presented for two different applications, power factor correction and harmonic elimination. The STATCOM model is developed in EMTP, and analytical equations for average conduction losses in an IGBT and a diode are derived and compared with experimental data. A commonly used reliability model is used to predict reliability of IGBT.

Data mining-based coefficient of influence factors optimization of test paper reliability

NASA Astrophysics Data System (ADS)

Xu, Peiyao; Jiang, Huiping; Wei, Jieyao

2018-05-01

Test is a significant part of the teaching process. It demonstrates the final outcome of school teaching through teachers' teaching level and students' scores. The analysis of test paper is a complex operation that has the characteristics of non-linear relation in the length of the paper, time duration and the degree of difficulty. It is therefore difficult to optimize the coefficient of influence factors under different conditions in order to get text papers with clearly higher reliability with general methods [1]. With data mining techniques like Support Vector Regression (SVR) and Genetic Algorithm (GA), we can model the test paper analysis and optimize the coefficient of impact factors for higher reliability. It's easy to find that the combination of SVR and GA can get an effective advance in reliability from the test results. The optimal coefficient of influence factors optimization has a practicability in actual application, and the whole optimizing operation can offer model basis for test paper analysis.

A systematic review of the factor structure and reliability of the Spence Children's Anxiety Scale.

PubMed

Orgilés, Mireia; Fernández-Martínez, Iván; Guillén-Riquelme, Alejandro; Espada, José P; Essau, Cecilia A

2016-01-15

The Spence Children's Anxiety Scale (SCAS) is a widely used instrument for assessing symptoms of anxiety disorders among children and adolescents. Previous studies have demonstrated its good reliability for children and adolescents from different backgrounds. However, remarkable variability in the reliability of the SCAS across studies and inconsistent results regarding its factor structure has been found. The present study aims to examine the SCAS factor structure by means of a systematic review with narrative synthesis, the mean reliability of the SCAS by means of a meta-analysis, and the influence of the moderators on the SCAS reliability. Databases employed to collect the studies included Scholar Google, PsycARTICLES, PsycINFO, Web of Science, and Scopus since 1997. Twenty-nine and 32 studies, which examined the factor structure and the internal consistency of the SCAS, respectively, were included. The SCAS was found to have strong internal consistency, influenced by different moderators. The systematic review demonstrated that the original six-factor model was supported by most studies. Factorial invariance studies (across age, gender, country) and test-retest reliability of the SCAS were not examined in this study. It is concluded that the SCAS is a reliable instrument for cross-cultural use, and it is suggested that the original six-factor model is appropriate for cross-cultural application. Copyright © 2015 Elsevier B.V. All rights reserved.

Brief Report: The Identity Style Inventory (ISI-3) and the Utrecht-Management of Identity Commitments Scale (U-MICS)--Factor Structure, Reliability, and Convergent Validity in French-Speaking University Students

ERIC Educational Resources Information Center

Zimmermann, Gregoire; Mahaim, Elodie Biermann; Mantzouranis, Gregory; Genoud, Philippe A.; Crocetti, Elisabetta

2012-01-01

The purpose of this study was to evaluate the factor structure and the reliability of the French versions of the Identity Style Inventory (ISI-3) and the Utrecht-Management of Identity Commitments Scale (U-MICS) in a sample of college students (N = 457, 18-25 years old). Confirmatory factor analyses confirmed the hypothesized three-factor solution…

Confirmatory Factor and Rasch Analyses Support a Revised 14-Item Version of the Organizational, Policies, and Practices (OPP) Scale.

PubMed

Shi, Qiyun; MacDermid, Joy C; Tang, Kenneth; Sinden, Kathryn E; Walton, Dave; Grewal, Ruby

2017-06-01

Background The long version of the organizational, policies and practices (OPP) had a high burden and short versions were developed to solve this drawback. The 11-item version showed promise, but the ergonomic subscale was deficient. The OPP-14 was developed by adding three additional items to the ergonomics subscale. The aim of this study is to evaluate the factor structure using confirmatory factor and Rasch analyses in healthy firefighters. Methods A sample of 261 firefighters (Mean age 42 years, 95 % male) were sampled. A confirmatory factor and Rasch analyses were used to assess the internal consistency, factor structure and other psychometric characteristics of revised OPP-14. Results The OPP-14 demonstrates sound factor structure and internal consistency in firefighters. Confirmatory factor analysis confirmed the consistency of the original 4-domain structure (CFI = 0.97, TLI = 0.96, and RMSEA = 0.053). The 5 items showing misfit initially with disordered thresholds were rescored. The four subscales satisfied Rasch expectations with well target and acceptable reliability. Conclusions The OPP-14 scale shows a promising factor structure in this sample and remediated deficits found in OPP-11. This version may be preferable for musculoskeletal concerns or work applications where ergonomic indicators are relevant.

Bandwidth and Fidelity on the NEO-Five Factor Inventory: Replicability and Reliability of Saucier’s (1998) Item Cluster Subcomponents

PubMed Central

Chapman, Benjamin P.

2012-01-01

Many users of the NEO-Five Factor Inventory (NEO-FFI; Costa & McCrae, 1992) are unaware that Saucier (1998) developed item cluster subcomponents for each broad domain of the instrument similar to the facets of the Revised NEO Personality Inventory (Costa & McCrae, 1992). In this study, I examined the following: the replicability of the subcomponents in young adult university and middle-aged community samples; whether item keying accounted for additional covariance among items; subcomponent correlations with a measure of socially desirable responding; subcomponent reliabilities; and subcomponent discriminant validity with respect to age-relevant criterion items expected to reflect varying associations with broad and narrow traits. Confirmatory factor analyses revealed that all subcomponents were recoverable across samples and that the addition of method factors representing positive and negative item keying improved model fit. The subcomponents correlated no more with a measure of socially desirable responding than their parent domains and showed good average reliability. Correlations with criterion items suggested that subcomponents may prove useful in specifying which elements of NEO-FFI domains are more or less related to variables of interest. I discuss their use for enhancing the precision of findings obtained with NEO-FFI domain scores. PMID:17437386

Reliable and fast volumetry of the lumbar spinal cord using cord image analyser (Cordial).

PubMed

Tsagkas, Charidimos; Altermatt, Anna; Bonati, Ulrike; Pezold, Simon; Reinhard, Julia; Amann, Michael; Cattin, Philippe; Wuerfel, Jens; Fischer, Dirk; Parmar, Katrin; Fischmann, Arne

2018-04-30

To validate the precision and accuracy of the semi-automated cord image analyser (Cordial) for lumbar spinal cord (SC) volumetry in 3D T1w MRI data of healthy controls (HC). 40 3D T1w images of 10 HC (w/m: 6/4; age range: 18-41 years) were acquired at one 3T-scanner in two MRI sessions (time interval 14.9±6.1 days). Each subject was scanned twice per session, allowing determination of test-retest reliability both in back-to-back (intra-session) and scan-rescan images (inter-session). Cordial was applied for lumbar cord segmentation twice per image by two raters, allowing for assessment of intra- and inter-rater reliability, and compared to a manual gold standard. While manually segmented volumes were larger (mean: 2028±245 mm 3 vs. Cordial: 1636±300 mm 3 , p<0.001), accuracy assessments between manually and semi-automatically segmented images showed a mean Dice-coefficient of 0.88±0.05. Calculation of within-subject coefficients of variation (COV) demonstrated high intra-session (1.22-1.86%), inter-session (1.26-1.84%), as well as intra-rater (1.73-1.83%) reproducibility. No significant difference was shown between intra- and inter-session reproducibility or between intra-rater reliabilities. Although inter-rater reproducibility (COV: 2.87%) was slightly lower compared to all other reproducibility measures, between rater consistency was very strong (intraclass correlation coefficient: 0.974). While under-estimating the lumbar SCV, Cordial still provides excellent inter- and intra-session reproducibility showing high potential for application in longitudinal trials. • Lumbar spinal cord segmentation using the semi-automated cord image analyser (Cordial) is feasible. • Lumbar spinal cord is 40-mm cord segment 60 mm above conus medullaris. • Cordial provides excellent inter- and intra-session reproducibility in lumbar spinal cord region. • Cordial shows high potential for application in longitudinal trials.

Bi-Factor Multidimensional Item Response Theory Modeling for Subscores Estimation, Reliability, and Classification

ERIC Educational Resources Information Center

Md Desa, Zairul Nor Deana

2012-01-01

In recent years, there has been increasing interest in estimating and improving subscore reliability. In this study, the multidimensional item response theory (MIRT) and the bi-factor model were combined to estimate subscores, to obtain subscores reliability, and subscores classification. Both the compensatory and partially compensatory MIRT…

Probabilistic Simulation of the Human Factor in Structural Reliability

NASA Technical Reports Server (NTRS)

Chamis, Christos C.; Singhal, Surendra N.

1994-01-01

The formal approach described herein computationally simulates the probable ranges of uncertainties for the human factor in probabilistic assessments of structural reliability. Human factors such as marital status, professional status, home life, job satisfaction, work load, and health are studied by using a multifactor interaction equation (MFIE) model to demonstrate the approach. Parametric studies in conjunction with judgment are used to select reasonable values for the participating factors (primitive variables). Subsequently performed probabilistic sensitivity studies assess the suitability of the MFIE as well as the validity of the whole approach. Results show that uncertainties range from 5 to 30 percent for the most optimistic case, assuming 100 percent for no error (perfect performance).

Probabilistic simulation of the human factor in structural reliability

NASA Astrophysics Data System (ADS)

Chamis, Christos C.; Singhal, Surendra N.

1994-09-01

The formal approach described herein computationally simulates the probable ranges of uncertainties for the human factor in probabilistic assessments of structural reliability. Human factors such as marital status, professional status, home life, job satisfaction, work load, and health are studied by using a multifactor interaction equation (MFIE) model to demonstrate the approach. Parametric studies in conjunction with judgment are used to select reasonable values for the participating factors (primitive variables). Subsequently performed probabilistic sensitivity studies assess the suitability of the MFIE as well as the validity of the whole approach. Results show that uncertainties range from 5 to 30 percent for the most optimistic case, assuming 100 percent for no error (perfect performance).

Exploration of the (Interrater) Reliability and Latent Factor Structure of the Alcohol Use Disorders Identification Test (AUDIT) and the Drug Use Disorders Identification Test (DUDIT) in a Sample of Dutch Probationers.

PubMed

Hildebrand, Martin; Noteborn, Mirthe G C

2015-01-01

The use of brief, reliable, valid, and practical measures of substance use is critical for conducting individual (risk and need) assessments in probation practice. In this exploratory study, the basic psychometric properties of the Alcohol Use Disorders Identification Test (AUDIT) and the Drug Use Disorders Identification Test (DUDIT) are evaluated. The instruments were administered as an oral interview instead of a self-report questionnaire. The sample comprised 383 offenders (339 men, 44 women). A subset of 56 offenders (49 men, 7 women) participated in the interrater reliability study. Data collection took place between September 2011 and November 2012. Overall, both instruments have acceptable levels of interrater reliability for total scores and acceptable to good interrater reliabilities for most of the individual items. Confirmatory factor analyses (CFA) indicated that the a priori one-, two- and three-factor solutions for the AUDIT did not fit the observed data very well. Principal axis factoring (PAF) supported a two-factor solution for the AUDIT that included a level of alcohol consumption/consequences factor (Factor 1) and a dependence factor (Factor 2), with both factors explaining substantial variance in AUDIT scores. For the DUDIT, CFA and PAF suggest that a one-factor solution is the preferred model (accounting for 62.61% of total variance). The Dutch language versions of the AUDIT and the DUDIT are reliable screening instruments for use with probationers and both instruments can be reliably administered by probation officers in probation practice. However, future research on concurrent and predictive validity is warranted.

The factorial reliability of the Middlesex Hospital Questionnaire in normal subjects.

PubMed

Bagley, C

1980-03-01

The internal reliability of the Middlesex Hospital Questionnaire and its component subscales has been checked by means of principal components analyses of data on 256 normal subjects. The subscales (with the possible exception of Hysteria) were found to contribute to the general underlying factor of psychoneurosis. In general, the principal components analysis points to the reliability of the subscales, despite some item overlap.

Stress and reliability analyses of multilayered composite cylinder under thermal and mechanical loads

NASA Astrophysics Data System (ADS)

Wang, Xiaohua

The coupling resulting from the mutual influence of material thermal and mechanical parameters is examined in the thermal stress analysis of a multilayered isotropic composite cylinder subjected to sudden axisymmetric external and internal temperature. The method of complex frequency response functions together with the Fourier transform technique is utilized. Because the coupling parameters for some composite materials, such as carbon-carbon, are very small, the effect of coupling is neglected in the orthotropic thermal stress analysis. The stress distributions in multilayered orthotropic cylinders subjected to sudden axisymmetric temperature loading combined with dynamic pressure as well as asymmetric temperature loading are also obtained. The method of Fourier series together with the Laplace transform is utilized in solving the heat conduction equation and thermal stress analysis. For brittle materials, like carbon-carbon composites, the strength variability is represented by two or three parameter Weibull distributions. The 'weakest link' principle which takes into account both the carbon-carbon composite cylinders. The complex frequency response analysis is performed on a multilayered orthotropic cylinder under asymmetrical thermal load. Both deterministic and random thermal stress and reliability analyses can be based on the results of this frequency response analysis. The stress and displacement distributions and reliability of rocket motors under static or dynamic line loads are analyzed by an elasticity approach. Rocket motors are modeled as long hollow multilayered cylinders with an air core, a thick isotropic propellant inner layer and a thin orthotropic kevlar-epoxy case. The case is treated as a single orthotropic layer or a ten layered orthotropic structure. Five material properties and the load are treated as random variable with normal distributions when the reliability of the rocket motor is analyzed by the first-order, second-moment method (FOSM).

Reliability of Corneal Dynamic Scheimpflug Analyser Measurements in Virgin and Post-PRK Eyes

PubMed Central

Chen, Xiangjun; Stojanovic, Aleksandar; Hua, Yanjun; Eidet, Jon Roger; Hu, Di; Wang, Jingting; Utheim, Tor Paaske

2014-01-01

Purpose To determine the measurement reliability of CorVis ST, a dynamic Scheimpflug analyser, in virgin and post-photorefractive keratectomy (PRK) eyes and compare the results between these two groups. Methods Forty virgin eyes and 42 post-PRK eyes underwent CorVis ST measurements performed by two technicians. Repeatability was evaluated by comparing three consecutive measurements by technician A. Reproducibility was determined by comparing the first measurement by technician A with one performed by technician B. Intraobserver and interobserver intraclass correlation coefficients (ICCs) were calculated. Univariate analysis of covariance (ANCOVA) was used to compare measured parameters between virgin and post-PRK eyes. Results The intraocular pressure (IOP), central corneal thickness (CCT) and 1st applanation time demonstrated good intraobserver repeatability and interobserver reproducibility (ICC≧0.90) in virgin and post-PRK eyes. The deformation amplitude showed a good or close to good repeatability and reproducibility in both groups (ICC≧0.88). The CCT correlated positively with 1st applanation time (r = 0.437 and 0.483, respectively, p<0.05) and negatively with deformation amplitude (r = −0.384 and −0.375, respectively, p<0.05) in both groups. Compared to post-PRK eyes, virgin eyes showed longer 1st applanation time (7.29±0.21 vs. 6.96±0.17 ms, p<0.05) and lower deformation amplitude (1.06±0.07 vs. 1.17±0.08 mm, p<0.05). Conclusions CorVis ST demonstrated reliable measurements for CCT, IOP, and 1st applanation time, as well as relatively reliable measurement for deformation amplitude in both virgin and post-PRK eyes. There were differences in 1st applanation time and deformation amplitude between virgin and post-PRK eyes, which may reflect corneal biomechanical changes occurring after the surgery in the latter. PMID:25302580

Reliability of corneal dynamic scheimpflug analyser measurements in virgin and post-PRK eyes.

PubMed

Chen, Xiangjun; Stojanovic, Aleksandar; Hua, Yanjun; Eidet, Jon Roger; Hu, Di; Wang, Jingting; Utheim, Tor Paaske

2014-01-01

To determine the measurement reliability of CorVis ST, a dynamic Scheimpflug analyser, in virgin and post-photorefractive keratectomy (PRK) eyes and compare the results between these two groups. Forty virgin eyes and 42 post-PRK eyes underwent CorVis ST measurements performed by two technicians. Repeatability was evaluated by comparing three consecutive measurements by technician A. Reproducibility was determined by comparing the first measurement by technician A with one performed by technician B. Intraobserver and interobserver intraclass correlation coefficients (ICCs) were calculated. Univariate analysis of covariance (ANCOVA) was used to compare measured parameters between virgin and post-PRK eyes. The intraocular pressure (IOP), central corneal thickness (CCT) and 1st applanation time demonstrated good intraobserver repeatability and interobserver reproducibility (ICC ≧ 0.90) in virgin and post-PRK eyes. The deformation amplitude showed a good or close to good repeatability and reproducibility in both groups (ICC ≧ 0.88). The CCT correlated positively with 1st applanation time (r = 0.437 and 0.483, respectively, p<0.05) and negatively with deformation amplitude (r = -0.384 and -0.375, respectively, p<0.05) in both groups. Compared to post-PRK eyes, virgin eyes showed longer 1st applanation time (7.29 ± 0.21 vs. 6.96 ± 0.17 ms, p<0.05) and lower deformation amplitude (1.06 ± 0.07 vs. 1.17 ± 0.08 mm, p < 0.05). CorVis ST demonstrated reliable measurements for CCT, IOP, and 1st applanation time, as well as relatively reliable measurement for deformation amplitude in both virgin and post-PRK eyes. There were differences in 1st applanation time and deformation amplitude between virgin and post-PRK eyes, which may reflect corneal biomechanical changes occurring after the surgery in the latter.

Reliability and Factorial Validity of the Artes de Lenguaje.

ERIC Educational Resources Information Center

Powers, Stephen; And Others

1984-01-01

Spanish speaking first graders were administered the Artes de Lenguage (ADL)--a Spanish, criterion-referenced, language arts test. Reliability analyses indicated the adequacy of three of the four subscales (Phonetic Analysis, Vocabulary Development, Comprehension Skills, and General Skills). A principal factors analysis of the intercorrelation…

Structural validity of the Wechsler Intelligence Scale for Children-Fifth Edition: Confirmatory factor analyses with the 16 primary and secondary subtests.

PubMed

Canivez, Gary L; Watkins, Marley W; Dombrowski, Stefan C

2017-04-01

The factor structure of the Wechsler Intelligence Scale for Children-Fifth Edition (WISC-V; Wechsler, 2014a) standardization sample (N = 2,200) was examined using confirmatory factor analyses (CFA) with maximum likelihood estimation for all reported models from the WISC-V Technical and Interpretation Manual (Wechsler, 2014b). Additionally, alternative bifactor models were examined and variance estimates and model-based reliability estimates (ω coefficients) were provided. Results from analyses of the 16 primary and secondary WISC-V subtests found that all higher-order CFA models with 5 group factors (VC, VS, FR, WM, and PS) produced model specification errors where the Fluid Reasoning factor produced negative variance and were thus judged inadequate. Of the 16 models tested, the bifactor model containing 4 group factors (VC, PR, WM, and PS) produced the best fit. Results from analyses of the 10 primary WISC-V subtests also found the bifactor model with 4 group factors (VC, PR, WM, and PS) produced the best fit. Variance estimates from both 16 and 10 subtest based bifactor models found dominance of general intelligence (g) in accounting for subtest variance (except for PS subtests) and large ω-hierarchical coefficients supporting general intelligence interpretation. The small portions of variance uniquely captured by the 4 group factors and low ω-hierarchical subscale coefficients likely render the group factors of questionable interpretive value independent of g (except perhaps for PS). Present CFA results confirm the EFA results reported by Canivez, Watkins, and Dombrowski (2015); Dombrowski, Canivez, Watkins, and Beaujean (2015); and Canivez, Dombrowski, and Watkins (2015). (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Strategic planning decision making using fuzzy SWOT-TOPSIS with reliability factor

NASA Astrophysics Data System (ADS)

Mohamad, Daud; Afandi, Nur Syamimi; Kamis, Nor Hanimah

2015-10-01

Strategic planning is a process of decision making and action for long-term activities in an organization. The Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis has been commonly used to help organizations in strategizing their future direction by analyzing internal and external environment. However, SWOT analysis has some limitations as it is unable to prioritize appropriately the multiple alternative strategic decisions. Some efforts have been made to solve this problem by incorporating Multi Criteria Decision Making (MCDM) methods. Nevertheless, another important aspect has raised concerns on obtaining the decision that is the reliability of the information. Decision makers evaluate differently depending on their level of confidence or sureness in the evaluation. This study proposes a decision making procedure for strategic planning using SWOT-TOPSIS method by incorporating the reliability factor of the evaluation based on Z-number. An example using a local authority in the east coast of Malaysia is illustrated to determine the strategic options ranking and to prioritize factors in each SWOT category.

Bayesian methods in reliability

NASA Astrophysics Data System (ADS)

Sander, P.; Badoux, R.

1991-11-01

The present proceedings from a course on Bayesian methods in reliability encompasses Bayesian statistical methods and their computational implementation, models for analyzing censored data from nonrepairable systems, the traits of repairable systems and growth models, the use of expert judgment, and a review of the problem of forecasting software reliability. Specific issues addressed include the use of Bayesian methods to estimate the leak rate of a gas pipeline, approximate analyses under great prior uncertainty, reliability estimation techniques, and a nonhomogeneous Poisson process. Also addressed are the calibration sets and seed variables of expert judgment systems for risk assessment, experimental illustrations of the use of expert judgment for reliability testing, and analyses of the predictive quality of software-reliability growth models such as the Weibull order statistics.

Reliability, validity and factor structure of the CES-D in Iranian elderly.

PubMed

Malakouti, Seyed Kazem; Pachana, Nancy A; Naji, Borzooyeh; Kahani, Shamsoddin; Saeedkhani, Mozhdeh

2015-12-01

In developing countries such as Iran, elder populations are growing. Due to the high prevalence of depressive disorders among elders, reliable screening instruments for this population are required. The main purpose of this study was to determine the reliability and validity of the Farsi version of the Center for Epidemiological Studies-Depression Scale-10 (CES-D) among Iranian elderly persons. The investigators created the Farsi version of the CES-D-10 by translation and back translation. Two hundred and four cases aged 59 and above completed the questionnaire. The reliability and validity of the translated CES-D-10 was established through comparison with the Composite International Diagnostic Interview (CIDI), a recognized gold standard method for diagnosing major depressive disorder. We used a receiver operating curve (ROC) to determine the optimum cutoff score. The Farsi version of the CED-D-10 displayed acceptable psychometric characteristics, as reflected in internal consistency with Cronbach's alpha, split-half coefficients and test-retest reliability of 0.85, 0.65 and 0.49, respectively. Factor analysis and the varimax rotation resulted in two factors including 'depression' and 'interpersonal relationships'. The Depression factor (introduced as CES-D-8 of the scale) had significant correlation with the 10 items form (r=0.99) with 0.87 alpha coefficient. The ROC showed that the optimum cutoff point is 5 with sensitivity of 82% and specificity of 70%, and positive and negative predictive values of 26% and 98%, respectively, for both of the forms. Both the 10 and 8 items form of the Farsi version have desirable characteristics to be useful as a screening instrument for depressive disorders in Iranian elders, especially in urban areas. Copyright © 2015 Elsevier B.V. All rights reserved.

The Reliability of Morphological Analyses in Language Samples

ERIC Educational Resources Information Center

Tommerdahl, Jodi; Kilpatrick, Cynthia D

2014-01-01

It is currently unclear to what extent a spontaneous language sample of a given number of utterances is representative of a child's ability in morphology and syntax. This lack of information about the regularity of children's linguistic productions and the reliability of spontaneous language samples have serious implications for language…

Factor structure and reliability of the depression, anxiety and stress scales in a large Portuguese community sample.

PubMed

Vasconcelos-Raposo, José; Fernandes, Helder Miguel; Teixeira, Carla M

2013-01-01

The purpose of the present study was to assess the factor structure and reliability of the Depression, Anxiety and Stress Scales (DASS-21) in a large Portuguese community sample. Participants were 1020 adults (585 women and 435 men), with a mean age of 36.74 (SD = 11.90) years. All scales revealed good reliability, with Cronbach's alpha values between .80 (anxiety) and .84 (depression). The internal consistency of the total score was .92. Confirmatory factor analysis revealed that the best-fitting model (*CFI = .940, *RMSEA = .038) consisted of a latent component of general psychological distress (or negative affectivity) plus orthogonal depression, anxiety and stress factors. The Portuguese version of the DASS-21 showed good psychometric properties (factorial validity and reliability) and thus can be used as a reliable and valid instrument for measuring depression, anxiety and stress symptoms.

Fatigue reliability of deck structures subjected to correlated crack growth

NASA Astrophysics Data System (ADS)

Feng, G. Q.; Garbatov, Y.; Guedes Soares, C.

2013-12-01

The objective of this work is to analyse fatigue reliability of deck structures subjected to correlated crack growth. The stress intensity factors of the correlated cracks are obtained by finite element analysis and based on which the geometry correction functions are derived. The Monte Carlo simulations are applied to predict the statistical descriptors of correlated cracks based on the Paris-Erdogan equation. A probabilistic model of crack growth as a function of time is used to analyse the fatigue reliability of deck structures accounting for the crack propagation correlation. A deck structure is modelled as a series system of stiffened panels, where a stiffened panel is regarded as a parallel system composed of plates and are longitudinal. It has been proven that the method developed here can be conveniently applied to perform the fatigue reliability assessment of structures subjected to correlated crack growth.

Test-Retest Reliability of Pediatric Heart Rate Variability

PubMed Central

Weiner, Oren M.; McGrath, Jennifer J.

2017-01-01

Heart rate variability (HRV), an established index of autonomic cardiovascular modulation, is associated with health outcomes (e.g., obesity, diabetes) and mortality risk. Time- and frequency-domain HRV measures are commonly reported in longitudinal adult and pediatric studies of health. While test-retest reliability has been established among adults, less is known about the psychometric properties of HRV among infants, children, and adolescents. The objective was to conduct a meta-analysis of the test-retest reliability of time- and frequency-domain HRV measures from infancy to adolescence. Electronic searches (PubMed, PsycINFO; January 1970–December 2014) identified studies with nonclinical samples aged ≤ 18 years; ≥ 2 baseline HRV recordings separated by ≥ 1 day; and sufficient data for effect size computation. Forty-nine studies (N = 5,170) met inclusion criteria. Methodological variables coded included factors relevant to study protocol, sample characteristics, electrocardiogram (ECG) signal acquisition and preprocessing, and HRV analytical decisions. Fisher’s Z was derived as the common effect size. Analyses were age-stratified (infant/toddler < 5 years, n = 3,329; child/adolescent 5–18 years, n = 1,841) due to marked methodological differences across the pediatric literature. Meta-analytic results revealed HRV demonstrated moderate reliability; child/adolescent studies (Z = 0.62, r = 0.55) had significantly higher reliability than infant/toddler studies (Z = 0.42, r = 0.40). Relative to other reported measures, HF exhibited the highest reliability among infant/toddler studies (Z = 0.42, r = 0.40), while rMSSD exhibited the highest reliability among child/adolescent studies (Z = 1.00, r = 0.76). Moderator analyses indicated greater reliability with shorter test-retest interval length, reported exclusion criteria based on medical illness/condition, lower proportion of males, prerecording acclimatization period, and longer recording duration

Reliability, convergent validity and factor structure of the DASS-21 in a sample of Vietnamese adolescents.

PubMed

Le, Minh Thi Hong; Tran, Thach Duc; Holton, Sara; Nguyen, Huong Thanh; Wolfe, Rory; Fisher, Jane

2017-01-01

To assess the internal consistency, latent structure and convergent validity of the Depression, Anxiety and Stress Scale-21 (DASS-21) among adolescents in Vietnam. An anonymous, self-completed questionnaire was conducted among 1,745 high school students in Hanoi, Vietnam between October, 2013 and January, 2014. Confirmatory factor analyses were performed to assess the latent structure of the DASS-21. Factorial invariance between girls and boys was examined. Cronbach alphas and correlation coefficients between DASS-21 factor scores and the domain scores of the Duke Health Profile Adolescent Vietnamese validated version (ADHP-V) were calculated to assess DASS-21 internal consistency and convergent validity. A total of 1,606/ 1,745 (92.6%) students returned the questionnaire. Of those, 1,387 students provided complete DASS-21 data. The scale demonstrated adequate internal consistency (Cronbach α: 0.761 to 0.906). A four-factor model showed the best fit to the data. Items loaded significantly on a common general distress factor, the depression, and the anxiety factors, but few on the stress factor (p<0.05). DASS-21 convergent validity was confirmed with moderate correlation coefficients (-0.47 to -0.66) between its factor scores and the ADHP-V mental health related domains. The DASS-21 is reliable and suitable for use to assess symptoms of common mental health problems, especially depression and anxiety among Vietnamese adolescents. However, its ability in detecting stress among these adolescents may be limited. Further research is warrant to explore these results.

The Research Identity Scale: Psychometric Analyses and Scale Refinement

ERIC Educational Resources Information Center

Jorgensen, Maribeth F.; Schweinle, William E.

2018-01-01

The 68-item Research Identity Scale (RIS) was informed through qualitative exploration of research identity development in master's-level counseling students and practitioners. Classical psychometric analyses revealed the items had strong validity and reliability and a single factor. A one-parameter Rasch analysis and item review was used to…

Assessing an organizational culture instrument based on the Competing Values Framework: Exploratory and confirmatory factor analyses

PubMed Central

Helfrich, Christian D; Li, Yu-Fang; Mohr, David C; Meterko, Mark; Sales, Anne E

2007-01-01

Background The Competing Values Framework (CVF) has been widely used in health services research to assess organizational culture as a predictor of quality improvement implementation, employee and patient satisfaction, and team functioning, among other outcomes. CVF instruments generally are presented as well-validated with reliable aggregated subscales. However, only one study in the health sector has been conducted for the express purpose of validation, and that study population was limited to hospital managers from a single geographic locale. Methods We used exploratory and confirmatory factor analyses to examine the underlying structure of data from a CVF instrument. We analyzed cross-sectional data from a work environment survey conducted in the Veterans Health Administration (VHA). The study population comprised all staff in non-supervisory positions. The survey included 14 items adapted from a popular CVF instrument, which measures organizational culture according to four subscales: hierarchical, entrepreneurial, team, and rational. Results Data from 71,776 non-supervisory employees (approximate response rate 51%) from 168 VHA facilities were used in this analysis. Internal consistency of the subscales was moderate to strong (α = 0.68 to 0.85). However, the entrepreneurial, team, and rational subscales had higher correlations across subscales than within, indicating poor divergent properties. Exploratory factor analysis revealed two factors, comprising the ten items from the entrepreneurial, team, and rational subscales loading on the first factor, and two items from the hierarchical subscale loading on the second factor, along with one item from the rational subscale that cross-loaded on both factors. Results from confirmatory factor analysis suggested that the two-subscale solution provides a more parsimonious fit to the data as compared to the original four-subscale model. Conclusion This study suggests that there may be problems applying conventional

Analysis Testing of Sociocultural Factors Influence on Human Reliability within Sociotechnical Systems: The Algerian Oil Companies.

PubMed

Laidoune, Abdelbaki; Rahal Gharbi, Med El Hadi

2016-09-01

The influence of sociocultural factors on human reliability within an open sociotechnical systems is highlighted. The design of such systems is enhanced by experience feedback. The study was focused on a survey related to the observation of working cases, and by processing of incident/accident statistics and semistructured interviews in the qualitative part. In order to consolidate the study approach, we considered a schedule for the purpose of standard statistical measurements. We tried to be unbiased by supporting an exhaustive list of all worker categories including age, sex, educational level, prescribed task, accountability level, etc. The survey was reinforced by a schedule distributed to 300 workers belonging to two oil companies. This schedule comprises 30 items related to six main factors that influence human reliability. Qualitative observations and schedule data processing had shown that the sociocultural factors can negatively and positively influence operator behaviors. The explored sociocultural factors influence the human reliability both in qualitative and quantitative manners. The proposed model shows how reliability can be enhanced by some measures such as experience feedback based on, for example, safety improvements, training, and information. With that is added the continuous systems improvements to improve sociocultural reality and to reduce negative behaviors.

First Order Reliability Application and Verification Methods for Semistatic Structures

NASA Technical Reports Server (NTRS)

Verderaime, Vincent

1994-01-01

Escalating risks of aerostructures stimulated by increasing size, complexity, and cost should no longer be ignored by conventional deterministic safety design methods. The deterministic pass-fail concept is incompatible with probability and risk assessments, its stress audits are shown to be arbitrary and incomplete, and it compromises high strength materials performance. A reliability method is proposed which combines first order reliability principles with deterministic design variables and conventional test technique to surmount current deterministic stress design and audit deficiencies. Accumulative and propagation design uncertainty errors are defined and appropriately implemented into the classical safety index expression. The application is reduced to solving for a factor that satisfies the specified reliability and compensates for uncertainty errors, and then using this factor as, and instead of, the conventional safety factor in stress analyses. The resulting method is consistent with current analytical skills and verification practices, the culture of most designers, and with the pace of semistatic structural designs.

First-order reliability application and verification methods for semistatic structures

NASA Astrophysics Data System (ADS)

Verderaime, V.

1994-11-01

Escalating risks of aerostructures stimulated by increasing size, complexity, and cost should no longer be ignored in conventional deterministic safety design methods. The deterministic pass-fail concept is incompatible with probability and risk assessments; stress audits are shown to be arbitrary and incomplete, and the concept compromises the performance of high-strength materials. A reliability method is proposed that combines first-order reliability principles with deterministic design variables and conventional test techniques to surmount current deterministic stress design and audit deficiencies. Accumulative and propagation design uncertainty errors are defined and appropriately implemented into the classical safety-index expression. The application is reduced to solving for a design factor that satisfies the specified reliability and compensates for uncertainty errors, and then using this design factor as, and instead of, the conventional safety factor in stress analyses. The resulting method is consistent with current analytical skills and verification practices, the culture of most designers, and the development of semistatic structural designs.

An Exploratory Factor Analysis and Reliability Analysis of the Student Online Learning Readiness (SOLR) Instrument

ERIC Educational Resources Information Center

Yu, Taeho; Richardson, Jennifer C.

2015-01-01

The purpose of this study was to develop an effective instrument to measure student readiness in online learning with reliable predictors of online learning success factors such as learning outcomes and learner satisfaction. The validity and reliability of the Student Online Learning Readiness (SOLR) instrument were tested using exploratory factor…

Factor Structure and Reliability of Test Items for Saudi Teacher Licence Assessment

ERIC Educational Resources Information Center

Alsadaawi, Abdullah Saleh

2017-01-01

The Saudi National Assessment Centre administers the Computer Science Teacher Test for teacher certification. The aim of this study is to explore gender differences in candidates' scores, and investigate dimensionality, reliability, and differential item functioning using confirmatory factor analysis and item response theory. The confirmatory…

Robust artificial neural network for reliability and sensitivity analyses of complex non-linear systems.

PubMed

Oparaji, Uchenna; Sheu, Rong-Jiun; Bankhead, Mark; Austin, Jonathan; Patelli, Edoardo

2017-12-01

Artificial Neural Networks (ANNs) are commonly used in place of expensive models to reduce the computational burden required for uncertainty quantification, reliability and sensitivity analyses. ANN with selected architecture is trained with the back-propagation algorithm from few data representatives of the input/output relationship of the underlying model of interest. However, different performing ANNs might be obtained with the same training data as a result of the random initialization of the weight parameters in each of the network, leading to an uncertainty in selecting the best performing ANN. On the other hand, using cross-validation to select the best performing ANN based on the ANN with the highest R 2 value can lead to biassing in the prediction. This is as a result of the fact that the use of R 2 cannot determine if the prediction made by ANN is biased. Additionally, R 2 does not indicate if a model is adequate, as it is possible to have a low R 2 for a good model and a high R 2 for a bad model. Hence, in this paper, we propose an approach to improve the robustness of a prediction made by ANN. The approach is based on a systematic combination of identical trained ANNs, by coupling the Bayesian framework and model averaging. Additionally, the uncertainties of the robust prediction derived from the approach are quantified in terms of confidence intervals. To demonstrate the applicability of the proposed approach, two synthetic numerical examples are presented. Finally, the proposed approach is used to perform a reliability and sensitivity analyses on a process simulation model of a UK nuclear effluent treatment plant developed by National Nuclear Laboratory (NNL) and treated in this study as a black-box employing a set of training data as a test case. This model has been extensively validated against plant and experimental data and used to support the UK effluent discharge strategy. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Turkish validity and reliability study of fear of pain questionnaire-III].

PubMed

Ünver, Seher; Turan, Fatma Nesrin

2018-01-01

This study aimed to develop a Turkish version of the Fear of Pain Questionnaire-III developed by McNeil and Rainwater (1998) and examine its validity and reliability indicators. The study was conducted with 459 university students studying in the nursing department. The Turkish translation of the scale was conducted by language experts and the original scale owner. Expert opinions were taken for language validity, and the Lawshe's content validity ratio formula was used to calculate the content validity. Exploratory factor analysis was used to assess the construct validity. The factors were rotated using the Varimax rotation (orthogonal) method. For reliability indicators of the questionnaire, the internal consistency coefficient and test re-test reliability were utilized. Explanatory factor analyses using the three-factor model (explaining 50.5% of the total variance) revealed that the item factor loads varied were above the limit value of 0.30 which indicated that the questionnaire had good construct validity. The Cronbach's alpha value for the total questionnaire was 0.938, and test re-test value was 0.846 for the total scale. The Turkish version of the Fear of Pain Questionnaire-III had sufficiently high reliability and validity to be used as a tool in evaluating the fear of pain among the young Turkish population.

Self-Management and Transition Readiness Assessment: Development, Reliability, and Factor Structure of the STARx Questionnaire.

PubMed

Ferris, M; Cohen, S; Haberman, C; Javalkar, K; Massengill, S; Mahan, J D; Kim, S; Bickford, K; Cantu, G; Medeiros, M; Phillips, A; Ferris, M T; Hooper, S R

2015-01-01

The Self-Management and Transition to Adulthood with Rx=Treatment (STARx) Questionnaire was developed to collect information on self-management and health care transition (HCT) skills, via self-report, in a broad population of adolescents and young adults (AYAs) with chronic conditions. Over several iterations, the STARx questionnaire was created with AYA, family, and health provider input. The development and pilot testing of the STARx Questionnaire took place with the assistance of 1219 AYAs with different chronic health conditions, in multiple institutions and settings over three phases: item development, pilot testing, reliability and factor structuring. The three development phases resulted in a final version of the STARx Questionnaire. The exploratory factor analysis of the third version of the 18-item STARx identified six factors that accounted for about 65% of the variance: Medication management, Provider communication, Engagement during appointments, Disease knowledge, Adult health responsibilities, and Resource utilization. Reliability estimates revealed good internal consistency and temporal stability, with the alpha coefficient for the overall scale being .80. The STARx was developmentally sensitive, with older patients scoring significantly higher on nearly every factor than younger patients. The STARx Questionnaire is a reliable, self-report tool with adequate internal consistency, temporal stability, and a strong, multidimensional factor structure. It provides another assessment strategy to measure self-management and transition skills in AYAs with chronic conditions. Copyright © 2015 Elsevier Inc. All rights reserved.

Reliability, convergent validity and factor structure of the DASS-21 in a sample of Vietnamese adolescents

PubMed Central

Tran, Thach Duc; Holton, Sara; Nguyen, Huong Thanh; Wolfe, Rory; Fisher, Jane

2017-01-01

Objectives To assess the internal consistency, latent structure and convergent validity of the Depression, Anxiety and Stress Scale-21 (DASS-21) among adolescents in Vietnam. Method An anonymous, self-completed questionnaire was conducted among 1,745 high school students in Hanoi, Vietnam between October, 2013 and January, 2014. Confirmatory factor analyses were performed to assess the latent structure of the DASS-21. Factorial invariance between girls and boys was examined. Cronbach alphas and correlation coefficients between DASS-21 factor scores and the domain scores of the Duke Health Profile Adolescent Vietnamese validated version (ADHP-V) were calculated to assess DASS-21 internal consistency and convergent validity. Results A total of 1,606/ 1,745 (92.6%) students returned the questionnaire. Of those, 1,387 students provided complete DASS-21 data. The scale demonstrated adequate internal consistency (Cronbach α: 0.761 to 0.906). A four-factor model showed the best fit to the data. Items loaded significantly on a common general distress factor, the depression, and the anxiety factors, but few on the stress factor (p<0.05). DASS-21 convergent validity was confirmed with moderate correlation coefficients (-0.47 to -0.66) between its factor scores and the ADHP-V mental health related domains. Conclusions The DASS-21 is reliable and suitable for use to assess symptoms of common mental health problems, especially depression and anxiety among Vietnamese adolescents. However, its ability in detecting stress among these adolescents may be limited. Further research is warrant to explore these results. PMID:28723909

Ulex Europaeus Agglutinin-1 Is a Reliable Taste Bud Marker for In Situ Hybridization Analyses.

PubMed

Yoshimoto, Joto; Okada, Shinji; Kishi, Mikiya; Misaka, Takumi

2016-03-01

Taste signals are received by taste buds. To better understand the taste reception system, expression patterns of taste-related molecules are determined by in situ hybridization (ISH) analyses at the histological level. Nevertheless, even though ISH is essential for determining mRNA expression, few taste bud markers can be applied together with ISH. Ulex europaeus agglutinin-1 (UEA-1) appears to be a reliable murine taste bud marker based on immunohistochemistry (IHC) analyses. However, there is no evidence as to whether UEA-1 can be used for ISH. Thus, the present study evaluated UEA-1 using various histochemical methods, especially ISH. When lectin staining was performed after ISH procedures, UEA-1 clearly labeled taste cellular membranes and distinctly indicated boundaries between taste buds and the surrounding epithelial cells. Additionally, UEA-1 was determined as a taste bud marker not only when used in single-colored ISH but also when employed with double-labeled ISH or during simultaneous detection using IHC and ISH methods. These results suggest that UEA-1 is a useful marker when conducting analyses based on ISH methods. To clarify UEA-1 staining details, multi-fluorescent IHC (together with UEA-1 staining) was examined, resulting in more than 99% of cells being labeled by UEA-1 and overlapping with KCNQ1-expressing cells. © 2016 The Histochemical Society.

Ulex Europaeus Agglutinin-1 Is a Reliable Taste Bud Marker for In Situ Hybridization Analyses

PubMed Central

Yoshimoto, Joto; Okada, Shinji; Kishi, Mikiya; Misaka, Takumi

2015-01-01

Taste signals are received by taste buds. To better understand the taste reception system, expression patterns of taste-related molecules are determined by in situ hybridization (ISH) analyses at the histological level. Nevertheless, even though ISH is essential for determining mRNA expression, few taste bud markers can be applied together with ISH. Ulex europaeus agglutinin-1 (UEA-1) appears to be a reliable murine taste bud marker based on immunohistochemistry (IHC) analyses. However, there is no evidence as to whether UEA-1 can be used for ISH. Thus, the present study evaluated UEA-1 using various histochemical methods, especially ISH. When lectin staining was performed after ISH procedures, UEA-1 clearly labeled taste cellular membranes and distinctly indicated boundaries between taste buds and the surrounding epithelial cells. Additionally, UEA-1 was determined as a taste bud marker not only when used in single-colored ISH but also when employed with double-labeled ISH or during simultaneous detection using IHC and ISH methods. These results suggest that UEA-1 is a useful marker when conducting analyses based on ISH methods. To clarify UEA-1 staining details, multi-fluorescent IHC (together with UEA-1 staining) was examined, resulting in more than 99% of cells being labeled by UEA-1 and overlapping with KCNQ1-expressing cells. PMID:26718243

Development and Validation of a Coping with Discrimination Scale: Factor Structure, Reliability, and Validity

ERIC Educational Resources Information Center

Wei, Meifen; Alvarez, Alvin N.; Ku, Tsun-Yao; Russell, Daniel W.; Bonett, Douglas G.

2010-01-01

Four studies were conducted to develop and validate the Coping With Discrimination Scale (CDS). In Study 1, an exploratory factor analysis (N = 328) identified 5 factors: Education/Advocacy, Internalization, Drug and Alcohol Use, Resistance, and Detachment, with internal consistency reliability estimates ranging from 0.72 to 0.90. In Study 2, a…

Development and Validation of the Personal Strengths Inventory Using Exploratory and Confirmatory Factor Analyses

ERIC Educational Resources Information Center

Liau, Albert Kienfie; Chow, Daryl; Tan, Teck Kiang; Senf, Konrad

2011-01-01

The purpose of this study was to establish the reliability and validity of the scores on a brief strengths-based assessment, the 22-item Personal Strengths Inventory (PSI). In Study 1, findings from exploratory factor analysis of 410 adolescents provided evidence for a five-factor solution--social competence (four items), emotional awareness (five…

The construct validity and reliability of the Turkish version of Spreitzer's psychological empowerment scale

PubMed Central

2010-01-01

Background Today, many organizations have adopted some kind of empowerment initiative for at least part of their workforce. Over the last two decades, two complementary perspectives on empowerment at work have emerged: structural and psychological empowerment. Psychological empowerment is a motivational construct manifested in four cognitions: meaning, competence, self-determination and impact. The aim of this article is to examine the construct validity and reliability of the Turkish translation of Spreitzer's psychological empowerment scale in a culturally diverse environment. Methods The scale contains four dimensions over 12 statements. Data were gathered from 260 nurses and 161 physicians. The dimensionality of the scale was evaluated by exploratory factor analyses. To investigate the multidimensional nature of the empowerment construct and the validity of the scale, first- and second-order confirmatory factor analysis was conducted. Furthermore, Cronbach alpha coefficients were assessed to investigate reliability. Results Exploratory factor analyses revealed that four factors in both solutions. The first- and second-order factor analysis indicated an acceptable fit between the data and the theoretical model for nurses and physicians. Cronbach alpha coefficients varied between 0.81-0.94 for both groups, which may be considered satisfactory. Conclusions The analyses indicated that the psychometric properties of the Turkish version of the scale can be considered satisfactory. PMID:20214770

Behavioral Analysis of Physical Security Job Analyses. Volume 1.

DTIC Science & Technology

1980-10-01

Job Analyses Personnel Reliability Program Junior Officers Physical Security Morale Motivation 20. ABSTRACT (Continue an reverese ode It neceearly and...internal motivation factors. Assignment of some auxiliary duties to enlisted personnel is possibly conducive to lowered efficiency in physical...subordinates; scheduling pressures; operational alerts and emergencies; relative lack of extrinsic rewards; constant necessity to prove credibility and

School Anxiety Inventory: Reliability and Validity Evidence in a Sample of Slovenian Adolescents

ERIC Educational Resources Information Center

Levpušcek, Melita Puklek; Inglés, Candido J.; Marzo, Juan C.; García-Fernández, Jose M.

2015-01-01

The purpose of this study was to examine the reliability and validity of the School Anxiety Inventory (SAI) using a sample of 646 Slovenian adolescents (48% boys), ranging in age from 12 to 19 years. Single confirmatory factor analyses replicated the correlated four-factor structure of scores on the SAI for anxiety-provoking school situations…

Reliability and Validity of the Chinese Version of the Solution-Focused Inventory in College Students

ERIC Educational Resources Information Center

Yang, Hongfei; Hai, Tang

2015-01-01

The psychometrics of the Chinese Solution-Focused Inventory (CSFI) was studied in Chinese college students. Confirmatory factor analysis confirmed the 3-factor structure. All subscales showed good reliability and convergent and incremental validity. Results of hierarchical regression analyses indicated that the 3 subscales accounted for additional…

Comprehensive Design Reliability Activities for Aerospace Propulsion Systems

NASA Technical Reports Server (NTRS)

Christenson, R. L.; Whitley, M. R.; Knight, K. C.

2000-01-01

This technical publication describes the methodology, model, software tool, input data, and analysis result that support aerospace design reliability studies. The focus of these activities is on propulsion systems mechanical design reliability. The goal of these activities is to support design from a reliability perspective. Paralleling performance analyses in schedule and method, this requires the proper use of metrics in a validated reliability model useful for design, sensitivity, and trade studies. Design reliability analysis in this view is one of several critical design functions. A design reliability method is detailed and two example analyses are provided-one qualitative and the other quantitative. The use of aerospace and commercial data sources for quantification is discussed and sources listed. A tool that was developed to support both types of analyses is presented. Finally, special topics discussed include the development of design criteria, issues of reliability quantification, quality control, and reliability verification.

The validity and intra-tester reliability of markerless motion capture to analyse kinematics of the BMX Supercross gate start.

PubMed

Grigg, Josephine; Haakonssen, Eric; Rathbone, Evelyne; Orr, Robin; Keogh, Justin W L

2017-11-13

The aim of this study was to quantify the validity and intra-tester reliability of a novel method of kinematic measurement. The measurement target was the joint angles of an athlete performing a BMX Supercross (SX) gate start action through the first 1.2 s of movement in situ on a BMX SX ramp using a standard gate start procedure. The method employed GoPro® Hero 4 Silver (GoPro Inc., USA) cameras capturing data at 120 fps 720 p on a 'normal' lens setting. Kinovea 0.8.15 (Kinovea.org, France) was used for analysis. Tracking data was exported and angles computed in Matlab (Mathworks®, USA). The gold standard 3D method for joint angle measurement could not safely be employed in this environment, so a rigid angle was used. Validity was measured to be within 2°. Intra-tester reliability was measured by the same tester performing the analysis twice with an average of 55 days between analyses. Intra-tester reliability was high, with an absolute error <6° and <9 frames (0.075 s) across all angles and time points for key positions, respectively. The methodology is valid within 2° and reliable within 6° for the calculation of joint angles in the first ~1.25 s.

Reliability, factor analysis and internal consistency calculation of the Insomnia Severity Index (ISI) in French and in English among Lebanese adolescents.

PubMed

Chahoud, M; Chahine, R; Salameh, P; Sauleau, E A

2017-06-01

Our goal is to validate and to verify the reliability of the French and English versions of the Insomnia Severity Index (ISI) in Lebanese adolescents. A cross-sectional study was implemented. 104 Lebanese students aged between 14 and 19 years participated in the study. The English version of the questionnaire was distributed to English-speaking students and the French version was administered to French-speaking students. A scale (1 to 7 with 1 = very well understood and 7 = not at all) was used to identify the level of the students' understanding of each instruction, question and answer of the ISI. The scale's structural validity was assessed. The factor structure of ISI was evaluated by principal component analysis. The internal consistency of this scale was evaluated by Cronbach's alpha. To assess test-retest reliability the intraclass correlation coefficient (ICC) was used. The principal component analysis confirmed the presence of a two-component factor structure in the English version and a three-component factor structure in the French version with eigenvalues > 1. The English version of the ISI had an excellent internal consistency (α = 0.90), while the French version had a good internal consistency (α = 0.70). The ICC presented an excellent agreement in the French version (ICC = 0.914, CI = 0.856-0.949) and a good agreement in the English one (ICC = 0.762, CI = 0.481-890). The Bland-Altman plots of the two versions of the ISI showed that the responses over two weeks' were comparable and very few outliers were detected. The results of our analyses reveal that both English and French versions of the ISI scale have good internal consistency and are reproducible and reliable. Therefore, it can be used to assess the prevalence of insomnia in Lebanese adolescents.

Correlates of walking and cycling for transport and recreation: factor structure, reliability and behavioural associations of the perceptions of the environment in the neighbourhood scale (PENS)

PubMed Central

2013-01-01

Background Emerging evidence suggests that walking and cycling for different purposes such as transport or recreation may be associated with different attributes of the physical environment. Few studies to date have examined these behaviour-specific associations, particularly in the UK. This paper reports on the development, factor structure and test-retest reliability of a new scale assessing perceptions of the environment in the neighbourhood (PENS) and the associations between perceptions of the environment and walking and cycling for transport and recreation. Methods A new 13-item scale was developed for assessing adults’ perceptions of the environment in the neighbourhood (PENS). Three sets of analyses were conducted using data from two sources. Exploratory and confirmatory factor analyses were used to identify a set of summary environmental variables using data from the iConnect baseline survey (n = 3494); test-retest reliability of the individual and summary environmental items was established using data collected in a separate reliability study (n = 166); and multivariable logistic regression was used to determine the associations of the environmental variables with walking for transport, walking for recreation, cycling for transport and cycling for recreation, using iConnect baseline survey data (n = 2937). Results Four summary environmental variables (traffic safety, supportive infrastructure, availability of local amenities and social order), one individual environmental item (street connectivity) and a variable encapsulating general environment quality were identified for use in further analyses. Intraclass correlations of these environmental variables ranged from 0.44 to 0.77 and were comparable to those seen in other similar scales. After adjustment for demographic and other environmental factors, walking for transport was associated with supportive infrastructure, availability of local amenities and general environment quality; walking

Reliability assessment of fiber optic communication lines depending on external factors and diagnostic errors

NASA Astrophysics Data System (ADS)

Bogachkov, I. V.; Lutchenko, S. S.

2018-05-01

The article deals with the method for the assessment of the fiber optic communication lines (FOCL) reliability taking into account the effect of the optical fiber tension, the temperature influence and the built-in diagnostic equipment errors of the first kind. The reliability is assessed in terms of the availability factor using the theory of Markov chains and probabilistic mathematical modeling. To obtain a mathematical model, the following steps are performed: the FOCL state is defined and validated; the state graph and system transitions are described; the system transition of states that occur at a certain point is specified; the real and the observed time of system presence in the considered states are identified. According to the permissible value of the availability factor, it is possible to determine the limiting frequency of FOCL maintenance.

Reliability of Travel Time: Challenges Posed by a Multimodal Transport Participation

NASA Astrophysics Data System (ADS)

Wanjek, Monika; Hauger, Georg

2017-10-01

Travel time reliability represents an essential component in individual decision making processes for transport participants, particularly regarding mode choices. As criteria that describe the quality of both transportation systems and transportation modes, travel time reliability is already frequently compiled, analysed and quoted as an argument. Currently, travel time reliability is solely mentioned on monomodal trips, while it has remained unconsidered on multimodal transport participation. Given the fact that multimodality gained significantly in importance, it is crucial to discuss how travel time reliability could be determined on multimodal trips. This paper points out the challenges that occur for applying travel time reliability on multimodal transport participation. Therefore, examples will be given within this paper. In order to illustrate theoretical ideas, trips and influencing factors that could be expected within the everyday transport behaviour of commuters in a (sub)urban area will be described.

Assessing the validity and reliability of family factors on physical activity: A case study in Turkey.

PubMed

Steenson, Sharalyn; Özcebe, Hilal; Arslan, Umut; Konşuk Ünlü, Hande; Araz, Özgür M; Yardim, Mahmut; Üner, Sarp; Bilir, Nazmi; Huang, Terry T-K

2018-01-01

Childhood obesity rates have been rising rapidly in developing countries. A better understanding of the risk factors and social context is necessary to inform public health interventions and policies. This paper describes the validation of several measurement scales for use in Turkey, which relate to child and parent perceptions of physical activity (PA) and enablers and barriers of physical activity in the home environment. The aim of this study was to assess the validity and reliability of several measurement scales in Turkey using a population sample across three socio-economic strata in the Turkish capital, Ankara. Surveys were conducted in Grade 4 children (mean age = 9.7 years for boys; 9.9 years for girls), and their parents, across 6 randomly selected schools, stratified by SES (n = 641 students, 483 parents). Construct validity of the scales was evaluated through exploratory and confirmatory factor analysis. Internal consistency of scales and test-retest reliability were assessed by Cronbach's alpha and intra-class correlation. The scales as a whole were found to have acceptable-to-good model fit statistics (PA Barriers: RMSEA = 0.076, SRMR = 0.0577, AGFI = 0.901; PA Outcome Expectancies: RMSEA = 0.054, SRMR = 0.0545, AGFI = 0.916, and PA Home Environment: RMSEA = 0.038, SRMR = 0.0233, AGFI = 0.976). The PA Barriers subscales showed good internal consistency and poor to fair test-retest reliability (personal α = 0.79, ICC = 0.29, environmental α = 0.73, ICC = 0.59). The PA Outcome Expectancies subscales showed good internal consistency and test-retest reliability (negative α = 0.77, ICC = 0.56; positive α = 0.74, ICC = 0.49). Only the PA Home Environment subscale on support for PA was validated in the final confirmatory model; it showed moderate internal consistency and test-retest reliability (α = 0.61, ICC = 0.48). This study is the first to validate measures of perceptions of physical activity and the physical activity home environment in Turkey

Analyses of inter-rater reliability between professionals, medical students and trained school children as assessors of basic life support skills.

PubMed

Beck, Stefanie; Ruhnke, Bjarne; Issleib, Malte; Daubmann, Anne; Harendza, Sigrid; Zöllner, Christian

2016-10-07

Training of lay-rescuers is essential to improve survival-rates after cardiac arrest. Multiple campaigns emphasise the importance of basic life support (BLS) training for school children. Trainings require a valid assessment to give feedback to school children and to compare the outcomes of different training formats. Considering these requirements, we developed an assessment of BLS skills using MiniAnne and tested the inter-rater reliability between professionals, medical students and trained school children as assessors. Fifteen professional assessors, 10 medical students and 111-trained school children (peers) assessed 1087 school children at the end of a CPR-training event using the new assessment format. Analyses of inter-rater reliability (intraclass correlation coefficient; ICC) were performed. Overall inter-rater reliability of the summative assessment was high (ICC = 0.84, 95 %-CI: 0.84 to 0.86, n = 889). The number of comparisons between peer-peer assessors (n = 303), peer-professional assessors (n = 339), and peer-student assessors (n = 191) was adequate to demonstrate high inter-rater reliability between peer- and professional-assessors (ICC: 0.76), peer- and student-assessors (ICC: 0.88) and peer- and other peer-assessors (ICC: 0.91). Systematic variation in rating of specific items was observed for three items between professional- and peer-assessors. Using this assessment and integrating peers and medical students as assessors gives the opportunity to assess hands-on skills of school children with high reliability.

Power System Reliability Assessment by Analysing Voltage Dips on the Blue Horizon Bay 22KV Overhead Line in the Nelson Mandela Bay Municipality

NASA Astrophysics Data System (ADS)

Lamour, B. G.; Harris, R. T.; Roberts, A. G.

2010-06-01

Power system reliability problems are very difficult to solve because the power systems are complex and geographically widely distributed and influenced by numerous unexpected events. It is therefore imperative to employ the most efficient optimization methods in solving the problems relating to reliability of the power system. This paper presents a reliability analysis and study of the power interruptions resulting from severe power outages in the Nelson Mandela Bay Municipality (NMBM), South Africa and includes an overview of the important factors influencing reliability, and methods to improve the reliability. The Blue Horizon Bay 22 kV overhead line, supplying a 6.6 kV residential sector has been selected. It has been established that 70% of the outages, recorded at the source, originate on this feeder.

Environmental risk factors and Parkinson's disease: An umbrella review of meta-analyses.

PubMed

Bellou, Vanesa; Belbasis, Lazaros; Tzoulaki, Ioanna; Evangelou, Evangelos; Ioannidis, John P A

2016-02-01

Parkinson's disease is a neurological disorder with complex pathogenesis implicating both environmental and genetic factors. We aimed to summarise the environmental risk factors that have been studied for potential association with Parkinson's disease, assess the presence of diverse biases, and identify the risk factors with the strongest support. We searched PubMed from inception to September 18, 2015, to identify systematic reviews and meta-analyses of observational studies that examined associations between environmental factors and Parkinson's disease. For each meta-analysis we estimated the summary effect size by random-effects and fixed-effects models, the 95% confidence interval and the 95% prediction interval. We estimated the between-study heterogeneity expressed by I(2), evidence of small-study effects and evidence of excess significance bias. Overall, 75 unique meta-analyses on different risk factors for Parkinson's disease were examined, covering diverse biomarkers, dietary factors, drugs, medical history or comorbid diseases, exposure to toxic environmental agents and habits. 21 of 75 meta-analyses had results that were significant at p < 0.001 by random-effects. Evidence for an association was convincing (more than 1000 cases, p < 10(-6) by random-effects, not large heterogeneity, 95% prediction interval excluding the null value and absence of hints for small-study effects and excess significance bias) for constipation, and physical activity. Many environmental factors have substantial evidence of association with Parkinson's disease, but several, perhaps most, of them may reflect reverse causation, residual confounding, information bias, sponsor conflicts or other caveats. Copyright © 2016. Published by Elsevier Ltd.

Test-retest reliability of the Military Pre-training Questionnaire.

PubMed

Robinson, M; Stokes, K; Bilzon, J; Standage, M; Brown, P; Thompson, D

2010-09-01

Musculoskeletal injuries are a significant cause of morbidity during military training. A brief, inexpensive and user-friendly tool that demonstrates reliability and validity is warranted to effectively monitor the relationship between multiple predictor variables and injury incidence in military populations. To examine the test-retest reliability of the Military Pre-training Questionnaire (MPQ), designed specifically to assess risk factors for injury among military trainees across five domains (physical activity, injury history, diet, alcohol and smoking). Analyses were based on a convenience sample of 58 male British Army trainees. Kappa (kappa), weighted kappa (kappa(w)) and intraclass correlation coefficients (ICC) were used to evaluate the 2-week test-retest reliability of the MPQ. For index measures constituting the assessment of a given construct, internal consistency was assessed by Cronbach's alpha (alpha) coefficients. Reliability of individual items ranged from poor to almost perfect (kappa range = 0.45-0.86; kappa(w) range = 0.11-0.91; ICC range = 0.34-0.86) with most items demonstrating moderate reliability. Overall scores related to physical activity, diet, alcohol and smoking constructs were reliable between both administrations (ICC = 0.63-0.85). Support for the internal consistency of the incorporated alcohol (alpha = 0.78) and cigarette (alpha = 0.75) scales was also provided. The MPQ is a reliable self-report instrument for assessing multiple injury-related risk factors during initial military training. Further assessment of the psychometric properties of the MPQ (e.g. different types of validity) with military populations/samples will support its interpretation and use in future surveillance and epidemiological studies.

Examining the Reliability and Validity of Clinician Ratings on the Five-Factor Model Score Sheet

ERIC Educational Resources Information Center

Few, Lauren R.; Miller, Joshua D.; Morse, Jennifer Q.; Yaggi, Kirsten E.; Reynolds, Sarah K.; Pilkonis, Paul A.

2010-01-01

Despite substantial research use, measures of the five-factor model (FFM) are infrequently used in clinical settings due, in part, to issues related to administration time and a reluctance to use self-report instruments. The current study examines the reliability and validity of the Five-Factor Model Score Sheet (FFMSS), which is a 30-item…

An experiment in software reliability: Additional analyses using data from automated replications

NASA Technical Reports Server (NTRS)

Dunham, Janet R.; Lauterbach, Linda A.

1988-01-01

A study undertaken to collect software error data of laboratory quality for use in the development of credible methods for predicting the reliability of software used in life-critical applications is summarized. The software error data reported were acquired through automated repetitive run testing of three independent implementations of a launch interceptor condition module of a radar tracking problem. The results are based on 100 test applications to accumulate a sufficient sample size for error rate estimation. The data collected is used to confirm the results of two Boeing studies reported in NASA-CR-165836 Software Reliability: Repetitive Run Experimentation and Modeling, and NASA-CR-172378 Software Reliability: Additional Investigations into Modeling With Replicated Experiments, respectively. That is, the results confirm the log-linear pattern of software error rates and reject the hypothesis of equal error rates per individual fault. This rejection casts doubt on the assumption that the program's failure rate is a constant multiple of the number of residual bugs; an assumption which underlies some of the current models of software reliability. data raises new questions concerning the phenomenon of interacting faults.

Reliability and validity of the Salford-Scott Nursing Values Questionnaire in Turkish.

PubMed

Ulusoy, Hatice; Güler, Güngör; Yıldırım, Gülay; Demir, Ecem

2018-02-01

Developing professional values among nursing students is important because values are a significant predictor of the quality care that will be provided, the clients' recognition, and consequently the nurses' job satisfaction. The literature analysis showed that there is only one validated tool available in Turkish that examines both the personal and the professional values of nursing students. The aim of this study was to assess the reliability and validity of the Salford-Scott Nursing Values Questionnaire in Turkish. This study was a Turkish linguistic and cultural adaptation of a research tool. Participants and research context: The sample of this study consisted of 627 undergraduate nursing students from different geographical areas of Turkey. Two questionnaires were used for data collection: a socio-demographic form and the Salford-Scott Nursing Values Questionnaire. For the Salford-Scott Nursing Values Questionnaire, construct validity was examined using factor analyses. Ethical considerations: The study was approved by the Cumhuriyet University Faculty of Medicine Research Ethics Board. Students were informed that participation in the study was entirely voluntary and anonymous. Item content validity index ranged from 0.66 to 1.0, and the total content validity index was 0.94. The Kaiser-Meyer-Olkin measure of sampling was 0.870, and Bartlett's test of sphericity was statistically significant (x 2 = 3108.714, p < 0.001). Construct validity was examined using factor analyses and the six factors were identified. Cronbach's alpha was used to assess the internal consistency reliability and the value of 0.834 was obtained. Our analyses showed that the Turkish version of Salford-Scott Nursing Values Questionnaire has high validity and reliability.

Test-Retest Reliability of Pediatric Heart Rate Variability: A Meta-Analysis.

PubMed

Weiner, Oren M; McGrath, Jennifer J

2017-01-01

Heart rate variability (HRV), an established index of autonomic cardiovascular modulation, is associated with health outcomes (e.g., obesity, diabetes) and mortality risk. Time- and frequency-domain HRV measures are commonly reported in longitudinal adult and pediatric studies of health. While test-retest reliability has been established among adults, less is known about the psychometric properties of HRV among infants, children, and adolescents. The objective was to conduct a meta-analysis of the test-retest reliability of time- and frequency-domain HRV measures from infancy to adolescence. Electronic searches (PubMed, PsycINFO; January 1970-December 2014) identified studies with nonclinical samples aged ≤ 18 years; ≥ 2 baseline HRV recordings separated by ≥ 1 day; and sufficient data for effect size computation. Forty-nine studies ( N = 5,170) met inclusion criteria. Methodological variables coded included factors relevant to study protocol, sample characteristics, electrocardiogram (ECG) signal acquisition and preprocessing, and HRV analytical decisions. Fisher's Z was derived as the common effect size. Analyses were age-stratified (infant/toddler < 5 years, n = 3,329; child/adolescent 5-18 years, n = 1,841) due to marked methodological differences across the pediatric literature. Meta-analytic results revealed HRV demonstrated moderate reliability; child/adolescent studies ( Z = 0.62, r = 0.55) had significantly higher reliability than infant/toddler studies ( Z = 0.42, r = 0.40). Relative to other reported measures, HF exhibited the highest reliability among infant/toddler studies ( Z = 0.42, r = 0.40), while rMSSD exhibited the highest reliability among child/adolescent studies ( Z = 1.00, r = 0.76). Moderator analyses indicated greater reliability with shorter test-retest interval length, reported exclusion criteria based on medical illness/condition, lower proportion of males, prerecording acclimatization period, and longer recording duration

Environmental risk factors for autism: an evidence-based review of systematic reviews and meta-analyses.

PubMed

Modabbernia, Amirhossein; Velthorst, Eva; Reichenberg, Abraham

2017-01-01

According to recent evidence, up to 40-50% of variance in autism spectrum disorder (ASD) liability might be determined by environmental factors. In the present paper, we conducted a review of systematic reviews and meta-analyses of environmental risk factors for ASD. We assessed each review for quality of evidence and provided a brief overview of putative mechanisms of environmental risk factors for ASD. Current evidence suggests that several environmental factors including vaccination, maternal smoking, thimerosal exposure, and most likely assisted reproductive technologies are unrelated to risk of ASD. On the contrary, advanced parental age is associated with higher risk of ASD. Birth complications that are associated with trauma or ischemia and hypoxia have also shown strong links to ASD, whereas other pregnancy-related factors such as maternal obesity, maternal diabetes, and caesarian section have shown a less strong (but significant) association with risk of ASD. The reviews on nutritional elements have been inconclusive about the detrimental effects of deficiency in folic acid and omega 3, but vitamin D seems to be deficient in patients with ASD. The studies on toxic elements have been largely limited by their design, but there is enough evidence for the association between some heavy metals (most important inorganic mercury and lead) and ASD that warrants further investigation. Mechanisms of the association between environmental factors and ASD are debated but might include non-causative association (including confounding), gene-related effect, oxidative stress, inflammation, hypoxia/ischemia, endocrine disruption, neurotransmitter alterations, and interference with signaling pathways. Compared to genetic studies of ASD, studies of environmental risk factors are in their infancy and have significant methodological limitations. Future studies of ASD risk factors would benefit from a developmental psychopathology approach, prospective design, precise exposure

Laser System Reliability

DTIC Science & Technology

1977-03-01

system acquisition cycle since they provide necessary inputs to comparative analyses, cost/benefit trade -offs, and system simulations. In addition, the...Management Program from above performs the function of analyzing the system trade -offs with respect to reliability to determine a reliability goal...one encounters the problem of comparing present dollars with future dollars. In this analysis, we are trading off costs expended initially (or at

Construct validity and reliability of the Single Checking Administration of Medications Scale.

PubMed

O'Connell, Beverly; Hawkins, Mary; Ockerby, Cherene

2013-06-01

Research indicates that single checking of medications is as safe as double checking; however, many nurses are averse to independently checking medications. To assist with the introduction and use of single checking, a measure of nurses' attitudes, the thirteen-item Single Checking Administration of Medications Scale (SCAMS) was developed. We examined the psychometric properties of the SCAMS. Secondary analyses were conducted on data collected from 503 nurses across a large Australian health-care service. Analyses using exploratory and confirmatory factor analyses supported by structural equation modelling resulted in a valid twelve-item SCAMS containing two reliable subscales, the nine-item Attitudes towards single checking and three-item Advantages of single checking subscales. The SCAMS is recommended as a valid and reliable measure for monitoring nurses' attitudes to single checking prior to introducing single checking medications and after its implementation. © 2013 Wiley Publishing Asia Pty Ltd.

Region of Interest Correction Factors Improve Reliability of Diffusion Imaging Measures Within and Across Scanners and Field Strengths

PubMed Central

Venkatraman, Vijay K; Gonzalez, Christopher E.; Landman, Bennett; Goh, Joshua; Reiter, David A.; An, Yang; Resnick, Susan M.

2017-01-01

Diffusion tensor imaging (DTI) measures are commonly used as imaging markers to investigate individual differences in relation to behavioral and health-related characteristics. However, the ability to detect reliable associations in cross-sectional or longitudinal studies is limited by the reliability of the diffusion measures. Several studies have examined reliability of diffusion measures within (i.e. intra-site) and across (i.e. inter-site) scanners with mixed results. Our study compares the test-retest reliability of diffusion measures within and across scanners and field strengths in cognitively normal older adults with a follow-up interval less than 2.25 years. Intra-class correlation (ICC) and coefficient of variation (CoV) of fractional anisotropy (FA) and mean diffusivity (MD) were evaluated in sixteen white matter and twenty-six gray matter bilateral regions. The ICC for intra-site reliability (0.32 to 0.96 for FA and 0.18 to 0.95 for MD in white matter regions; 0.27 to 0.89 for MD and 0.03 to 0.79 for FA in gray matter regions) and inter-site reliability (0.28 to 0.95 for FA in white matter regions, 0.02 to 0.86 for MD in gray matter regions) with longer follow-up intervals were similar to earlier studies using shorter follow-up intervals. The reliability of across field strengths comparisons was lower than intra- and inter-site reliability. Within and across scanner comparisons showed that diffusion measures were more stable in larger white matter regions (> 1500 mm3). For gray matter regions, the MD measure showed stability in specific regions and was not dependent on region size. Linear correction factor estimated from cross-sectional or longitudinal data improved the reliability across field strengths. Our findings indicate that investigations relating diffusion measures to external variables must consider variable reliability across the distinct regions of interest and that correction factors can be used to improve consistency of measurement across

Reliability analysis and initial requirements for FC systems and stacks

NASA Astrophysics Data System (ADS)

Åström, K.; Fontell, E.; Virtanen, S.

In the year 2000 Wärtsilä Corporation started an R&D program to develop SOFC systems for CHP applications. The program aims to bring to the market highly efficient, clean and cost competitive fuel cell systems with rated power output in the range of 50-250 kW for distributed generation and marine applications. In the program Wärtsilä focuses on system integration and development. System reliability and availability are key issues determining the competitiveness of the SOFC technology. In Wärtsilä, methods have been implemented for analysing the system in respect to reliability and safety as well as for defining reliability requirements for system components. A fault tree representation is used as the basis for reliability prediction analysis. A dynamic simulation technique has been developed to allow for non-static properties in the fault tree logic modelling. Special emphasis has been placed on reliability analysis of the fuel cell stacks in the system. A method for assessing reliability and critical failure predictability requirements for fuel cell stacks in a system consisting of several stacks has been developed. The method is based on a qualitative model of the stack configuration where each stack can be in a functional, partially failed or critically failed state, each of the states having different failure rates and effects on the system behaviour. The main purpose of the method is to understand the effect of stack reliability, critical failure predictability and operating strategy on the system reliability and availability. An example configuration, consisting of 5 × 5 stacks (series of 5 sets of 5 parallel stacks) is analysed in respect to stack reliability requirements as a function of predictability of critical failures and Weibull shape factor of failure rate distributions.

Women's Mental Health Questionnaire (W-MHQ), Construction, Reliability, Validity: Father Parenting Associations

ERIC Educational Resources Information Center

Perkins, Rose J. Merlino

2018-01-01

"Women's Mental Health Questionnaire" (W-MHQ) assesses females' adult mental health concerns, and examines their associations with specified father-daughter childhood relationships. Presented are W-MHQ item and scale development, and psychometric findings drawn from factor analyses, reliability assessments, and validation processes. For…

Validity and Reliability of 2 Goniometric Mobile Apps: Device, Application, and Examiner Factors.

PubMed

Wellmon, Robert H; Gulick, Dawn T; Paterson, Mark L; Gulick, Colleen N

2016-12-01

Smartphones are being used in a variety of practice settings to measure joint range of motion (ROM). A number of factors can affect the validity of the measurements generated. However, there are no studies examining smartphone-based goniometer applications focusing on measurement variability and error arising from the electromechanical properties of the device being used. To examine the concurrent validity and interrater reliability of 2 goniometric mobile applications (Goniometer Records, Goniometer Pro), an inclinometer, and a universal goniometer (UG). Nonexperimental, descriptive validation study. University laboratory. 3 physical therapists having an average of 25 y of experience. Three standardized angles (acute, right, obtuse) were constructed to replicate the movement of a hinge joint in the human body. Angular changes were measured and compared across 3 raters who used 3 different devices (UG, inclinometer, and 2 goniometric apps installed on 3 different smartphones: Apple iPhone 5, LG Android, and Samsung SIII Android). Intraclass correlation coefficients (ICCs) and Bland-Altman plots were used to examine interrater reliability and concurrent validity. Interrater reliability for each of the smartphone apps, inclinometer and UG were excellent (ICC = .995-1.000). Concurrent validity was also good (ICC = .998-.999). Based on the Bland-Altman plots, the means of the differences between the devices were low (range = -0.4° to 1.2°). This study identifies the error inherent in measurement that is independent of patient factors and due to the smartphone, the installed apps, and examiner skill. Less than 2° of measurement variability was attributable to those factors alone. The data suggest that 3 smartphones with the 2 installed apps are a viable substitute for using a UG or an inclinometer when measuring angular changes that typically occur when examining ROM and demonstrate the capacity of multiple examiners to accurately use smartphone-based goniometers.

The Study of Factor Structure and Reliability of an Abbreviated School Climate Survey

ERIC Educational Resources Information Center

Ding, Cody; Liu, Ying; Berkowitz, Marvin

2011-01-01

The concept of school climate has been an important variable in research on quality of school life and student learning. One of the challenges in such a research effort is to develop instruments that could effectively and efficiently measure the construct. The purpose of the current study was to examine the factor structure and reliability of an…

A symptom self-rating scale for schizophrenia (4S): psychometric properties, reliability and validity.

PubMed

Lindström, Eva; Jedenius, Erik; Levander, Sten

2009-01-01

The objective of the study was to validate a self-administrated symptom rating scale for use in patients with schizophrenia spectrum disorders by item analysis, exploration of factor structure, and analyses of reliability and validity. Data on 151 patients, initially treated by risperidone, obtained within the framework of a naturalistic Phase IV longitudinal study, were analysed by comparing patient and clinician ratings of symptoms, side-effects and global indices of illness. The Symptom Self-rating Scale for Schizophrenia (4S) is psychometrically adequate (item analysis, internal consistency, factor structure). Side-effect ratings were reliable. Symptom ratings displayed consistent associations with clinicians' ratings of corresponding symptom dimensions, suggesting construct validity. Patients had most difficulties assessing negative symptom items. Patients were well able to assess their own symptoms and drug side-effects. The factor structure of symptom ratings differs between patients and clinicians as well as how they construe global indices of illness. Clinicians focus on psychotic, patients on affective symptoms. Use of symptom self-ratings is one way to improve communication and thereby strengthen the therapeutic alliance and increase treatment adherence.

Model-centric distribution automation: Capacity, reliability, and efficiency

DOE PAGES

Onen, Ahmet; Jung, Jaesung; Dilek, Murat; ...

2016-02-26

A series of analyses along with field validations that evaluate efficiency, reliability, and capacity improvements of model-centric distribution automation are presented. With model-centric distribution automation, the same model is used from design to real-time control calculations. A 14-feeder system with 7 substations is considered. The analyses involve hourly time-varying loads and annual load growth factors. Phase balancing and capacitor redesign modifications are used to better prepare the system for distribution automation, where the designs are performed considering time-varying loads. Coordinated control of load tap changing transformers, line regulators, and switched capacitor banks is considered. In evaluating distribution automation versus traditionalmore » system design and operation, quasi-steady-state power flow analysis is used. In evaluating distribution automation performance for substation transformer failures, reconfiguration for restoration analysis is performed. In evaluating distribution automation for storm conditions, Monte Carlo simulations coupled with reconfiguration for restoration calculations are used. As a result, the evaluations demonstrate that model-centric distribution automation has positive effects on system efficiency, capacity, and reliability.« less

Model-centric distribution automation: Capacity, reliability, and efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onen, Ahmet; Jung, Jaesung; Dilek, Murat

A series of analyses along with field validations that evaluate efficiency, reliability, and capacity improvements of model-centric distribution automation are presented. With model-centric distribution automation, the same model is used from design to real-time control calculations. A 14-feeder system with 7 substations is considered. The analyses involve hourly time-varying loads and annual load growth factors. Phase balancing and capacitor redesign modifications are used to better prepare the system for distribution automation, where the designs are performed considering time-varying loads. Coordinated control of load tap changing transformers, line regulators, and switched capacitor banks is considered. In evaluating distribution automation versus traditionalmore » system design and operation, quasi-steady-state power flow analysis is used. In evaluating distribution automation performance for substation transformer failures, reconfiguration for restoration analysis is performed. In evaluating distribution automation for storm conditions, Monte Carlo simulations coupled with reconfiguration for restoration calculations are used. As a result, the evaluations demonstrate that model-centric distribution automation has positive effects on system efficiency, capacity, and reliability.« less

Assessing public speaking fear with the short form of the Personal Report of Confidence as a Speaker scale: confirmatory factor analyses among a French-speaking community sample.

PubMed

Heeren, Alexandre; Ceschi, Grazia; Valentiner, David P; Dethier, Vincent; Philippot, Pierre

2013-01-01

The main aim of this study was to assess the reliability and structural validity of the French version of the 12-item version of the Personal Report of Confidence as Speaker (PRCS), one of the most promising measurements of public speaking fear. A total of 611 French-speaking volunteers were administered the French versions of the short PRCS, the Liebowitz Social Anxiety Scale, the Fear of Negative Evaluation scale, as well as the Trait version of the Spielberger State-Trait Anxiety Inventory and the Beck Depression Inventory-II, which assess the level of anxious and depressive symptoms, respectively. Regarding its structural validity, confirmatory factor analyses indicated a single-factor solution, as implied by the original version. Good scale reliability (Cronbach's alpha = 0.86) was observed. The item discrimination analysis suggested that all the items contribute to the overall scale score reliability. The French version of the short PRCS showed significant correlations with the Liebowitz Social Anxiety Scale (r = 0.522), the Fear of Negative Evaluation scale (r = 0.414), the Spielberger State-Trait Anxiety Inventory (r = 0.516), and the Beck Depression Inventory-II (r = 0.361). The French version of the short PRCS is a reliable and valid measure for the evaluation of the fear of public speaking among a French-speaking sample. These findings have critical consequences for the measurement of psychological and pharmacological treatment effectiveness in public speaking fear among a French-speaking sample.

Assessing public speaking fear with the short form of the Personal Report of Confidence as a Speaker scale: confirmatory factor analyses among a French-speaking community sample

PubMed Central

Heeren, Alexandre; Ceschi, Grazia; Valentiner, David P; Dethier, Vincent; Philippot, Pierre

2013-01-01

Background: The main aim of this study was to assess the reliability and structural validity of the French version of the 12-item version of the Personal Report of Confidence as Speaker (PRCS), one of the most promising measurements of public speaking fear. Methods: A total of 611 French-speaking volunteers were administered the French versions of the short PRCS, the Liebowitz Social Anxiety Scale, the Fear of Negative Evaluation scale, as well as the Trait version of the Spielberger State-Trait Anxiety Inventory and the Beck Depression Inventory-II, which assess the level of anxious and depressive symptoms, respectively. Results: Regarding its structural validity, confirmatory factor analyses indicated a single-factor solution, as implied by the original version. Good scale reliability (Cronbach’s alpha = 0.86) was observed. The item discrimination analysis suggested that all the items contribute to the overall scale score reliability. The French version of the short PRCS showed significant correlations with the Liebowitz Social Anxiety Scale (r = 0.522), the Fear of Negative Evaluation scale (r = 0.414), the Spielberger State-Trait Anxiety Inventory (r = 0.516), and the Beck Depression Inventory-II (r = 0.361). Conclusion: The French version of the short PRCS is a reliable and valid measure for the evaluation of the fear of public speaking among a French-speaking sample. These findings have critical consequences for the measurement of psychological and pharmacological treatment effectiveness in public speaking fear among a French-speaking sample. PMID:23662060

Measuring Educators' Attitudes and Beliefs about Evaluation: Construct Validity and Reliability of the Teacher Evaluation Experience Scale

ERIC Educational Resources Information Center

Reddy, Linda A.; Dudek, Christopher M.; Kettler, Ryan J.; Kurz, Alexander; Peters, Stephanie

2016-01-01

This study presents the reliability and validity of the Teacher Evaluation Experience Scale--Teacher Form (TEES-T), a multidimensional measure of educators' attitudes and beliefs about teacher evaluation. Confirmatory factor analyses of data from 583 teachers were conducted on the TEES-T hypothesized five-factor model, as well as on alternative…

Psychometric analyses to improve the Dutch ICF Activity Inventory.

PubMed

Bruijning, Janna E; van Rens, Ger; Knol, Dirk; van Nispen, Ruth

2013-08-01

In the past, rehabilitation centers for the visually impaired used unstructured or semistructured methods to assess rehabilitation needs of their patients. Recently, an extensive instrument, the Dutch ICF Activity Inventory (D-AI), was developed to systematically investigate rehabilitation needs of visually impaired adults and to evaluate rehabilitation outcomes. The purpose of this study was to investigate the underlying factor structure and other psychometric properties to shorten and improve the D-AI. The D-AI was administered to 241 visually impaired persons who recently enrolled in a multidisciplinary rehabilitation center. The D-AI uses graded scores to assess the importance and difficulty of 65 rehabilitation goals. For high-priority goals (e.g., daily meal preparation), the difficulty of underlying tasks (e.g., read recipes, cut vegetables) was assessed. To reduce underlying task items (>950), descriptive statistics were investigated and factor analyses were performed for several goals. The internal consistency reliability and test-retest reliability of the D-AI were investigated by calculating Cronbach α and Cohen (weighted) κ. Finally, consensus-based discussions were used to shorten and improve the D-AI. Except for one goal, factor analysis model parameters were at least reasonable. Internal consistency reliability was satisfactory (range, 0.74 to 0.93). In total, 60% of the 65 goal importance items and 84.4% of the goal difficulty items showed moderate to almost perfect κ values (≥0.40). After consensus-based discussions, a new D-AI was produced, containing 48 goals and less than 500 tasks. The analyses were an important step in the validation process of the D-AI and to develop a more feasible assessment tool to investigate rehabilitation needs of visually impaired persons in a systematic way. The D-AI is currently implemented in all Dutch rehabilitation centers serving all visually impaired adults with various rehabilitation needs.

Factor structure and reliability of the childhood trauma questionnaire and prevalence estimates of trauma for male and female street youth.

PubMed

Forde, David R; Baron, Stephen W; Scher, Christine D; Stein, Murray B

2012-01-01

This study examines the psychometric properties of the Childhood Trauma Questionnaire short form (CTQ-SF) with street youth who have run away or been expelled from their homes (N = 397). Internal reliability coefficients for the five clinical scales ranged from .65 to .95. Confirmatory Factor Analysis (CFA) was used to test the five-factor structure of the scales yielding acceptable fit for the total sample. Additional multigroup analyses were performed to consider items by gender. Results provided only evidence of weak factorial invariance. Constrained models showed invariance in configuration, factor loadings, and factor covariances but failed for equality of intercepts. Mean trauma scores for street youth tended to fall in the moderate to severe range on all abuse/neglect clinical scales. Females reported higher levels of abuse and neglect. Prevalence of child maltreatment of individual forms was very high with 98% of street youth reporting one or more forms; 27.4% of males and 48.9% of females reported all five forms. Results of this study support the viability of the CTQ-SF for screening maltreatment in a highly vulnerable street population. Caution is recommended when comparing prevalence estimates for male and female street youth given the failure of the strong factorial multigroup model.

Score reliability and factor similarity of the Sociocultural Attitudes Towards Appearance Questionnaire-3 (SATAQ-3) among four ethnic groups

PubMed Central

2013-01-01

Background This study evaluated the score reliability and equivalence of factor structure of the Sociocultural Attitudes towards Appearance Questionnaire-3 (SATAQ-3) [1] in a sample of female college students from the four largest ethnic groups in the USA. Methods Participants were 1245 women who self-identified as European American/White (n = 543), African American/Black (n = 137), Asian American (n = 317), or Latina/Hispanic (n = 248). All completed the SATAQ-3 and a demographic questionnaire. To test the factor similarity and score reliability across groups, we used exploratory factor analysis and calculated Cronbach’s alphas (respectively). Results Score reliability was high for all groups. Tests of factor equivalence suggested that the four pre-established factors of the SATAQ-3 (i.e., knowledge, perceived pressure, thin-ideal internalization, athletic-ideal internalization) were similar for women of all ethnic groups. Only two items (20 and 27) did not consistently load on the previously identified scale across all four groups. When scored, African Americans reported significantly less perceived pressure and internalization than all other groups. Conclusions Results support the use of the SATAQ-3 in female college students of these four ethnicities. PMID:24999395

Quasi-Static Probabilistic Structural Analyses Process and Criteria

NASA Technical Reports Server (NTRS)

Goldberg, B.; Verderaime, V.

1999-01-01

Current deterministic structural methods are easily applied to substructures and components, and analysts have built great design insights and confidence in them over the years. However, deterministic methods cannot support systems risk analyses, and it was recently reported that deterministic treatment of statistical data is inconsistent with error propagation laws that can result in unevenly conservative structural predictions. Assuming non-nal distributions and using statistical data formats throughout prevailing stress deterministic processes lead to a safety factor in statistical format, which integrated into the safety index, provides a safety factor and first order reliability relationship. The embedded safety factor in the safety index expression allows a historically based risk to be determined and verified over a variety of quasi-static metallic substructures consistent with the traditional safety factor methods and NASA Std. 5001 criteria.

External validity of a hierarchical dimensional model of child and adolescent psychopathology: Tests using confirmatory factor analyses and multivariate behavior genetic analyses.

PubMed

Waldman, Irwin D; Poore, Holly E; van Hulle, Carol; Rathouz, Paul J; Lahey, Benjamin B

2016-11-01

Several recent studies of the hierarchical phenotypic structure of psychopathology have identified a General psychopathology factor in addition to the more expected specific Externalizing and Internalizing dimensions in both youth and adult samples and some have found relevant unique external correlates of this General factor. We used data from 1,568 twin pairs (599 MZ & 969 DZ) age 9 to 17 to test hypotheses for the underlying structure of youth psychopathology and the external validity of the higher-order factors. Psychopathology symptoms were assessed via structured interviews of caretakers and youth. We conducted phenotypic analyses of competing structural models using Confirmatory Factor Analysis and used Structural Equation Modeling and multivariate behavior genetic analyses to understand the etiology of the higher-order factors and their external validity. We found that both a General factor and specific Externalizing and Internalizing dimensions are necessary for characterizing youth psychopathology at both the phenotypic and etiologic levels, and that the 3 higher-order factors differed substantially in the magnitudes of their underlying genetic and environmental influences. Phenotypically, the specific Externalizing and Internalizing dimensions were slightly negatively correlated when a General factor was included, which reflected a significant inverse correlation between the nonshared environmental (but not genetic) influences on Internalizing and Externalizing. We estimated heritability of the general factor of psychopathology for the first time. Its moderate heritability suggests that it is not merely an artifact of measurement error but a valid construct. The General, Externalizing, and Internalizing factors differed in their relations with 3 external validity criteria: mother's smoking during pregnancy, parent's harsh discipline, and the youth's association with delinquent peers. Multivariate behavior genetic analyses supported the external validity

Cumulative trauma disorders in the upper extremities: reliability of the postural and repetitive risk-factors index.

PubMed

James, C P; Harburn, K L; Kramer, J F

1997-08-01

This study addresses test-retest reliability of the Postural and Repetitive Risk-Factors Index (PRRI) for work-related upper body injuries. This assessment was developed by the present authors. A repeated measures design was used to assess the test-retest reliability of a videotaped work-site assessment of subjects' movements. Ten heavy users of video display terminals (VDTs) from a local banking industry participated in the study. The 10 subjects' movements were videotaped for 2 hours on each of 2 separate days, while working on-site at their VDTs. The videotaped assessment, which utilized known postural risk factors for developing musculoskeletal disorder, pain, and discomfort in heavy VDT users (ie, repetitiveness, awkward and static postures, and contraction time), was called the PRRI. The videotaped movement assessments were subsequently analyzed in 15-minute sessions (five sessions per 2-hour videotape, which produced a total of 10 sessions over the 2 testing days), and each session was chosen randomly from the videotape. The subjects' movements were given a postural risk score according to the criteria in the PRRI. Each subject was therefore tested a total of 10 times (ie, 10 sessions), over two days. The maximum PRRI score for both sides of the body was 216 points. Reliability coefficients (RCs) for the PRRI scores were calculated, and the reliability of any one session met the minimum criterion for excellent reliability, which was .75. A two-way analysis of variance (ANOVA) confirmed that there was no statistically significant difference between sessions (p < .05). Calculations using the standard error of measurement (SEM) indicated that an individual tested once, on one day and with a PRRI score of 25, required a change of at least 8 points in order to be confident that a true change in score had occurred. The significant results from the reliability tests indicated that the PRRI was a reliable measurement tool that could be used by occupational health

A systematic review of publications assessing reliability and validity of the Behavioral Risk Factor Surveillance System (BRFSS), 2004–2011

PubMed Central

2013-01-01

Background In recent years response rates on telephone surveys have been declining. Rates for the behavioral risk factor surveillance system (BRFSS) have also declined, prompting the use of new methods of weighting and the inclusion of cell phone sampling frames. A number of scholars and researchers have conducted studies of the reliability and validity of the BRFSS estimates in the context of these changes. As the BRFSS makes changes in its methods of sampling and weighting, a review of reliability and validity studies of the BRFSS is needed. Methods In order to assess the reliability and validity of prevalence estimates taken from the BRFSS, scholarship published from 2004–2011 dealing with tests of reliability and validity of BRFSS measures was compiled and presented by topics of health risk behavior. Assessments of the quality of each publication were undertaken using a categorical rubric. Higher rankings were achieved by authors who conducted reliability tests using repeated test/retest measures, or who conducted tests using multiple samples. A similar rubric was used to rank validity assessments. Validity tests which compared the BRFSS to physical measures were ranked higher than those comparing the BRFSS to other self-reported data. Literature which undertook more sophisticated statistical comparisons was also ranked higher. Results Overall findings indicated that BRFSS prevalence rates were comparable to other national surveys which rely on self-reports, although specific differences are noted for some categories of response. BRFSS prevalence rates were less similar to surveys which utilize physical measures in addition to self-reported data. There is very little research on reliability and validity for some health topics, but a great deal of information supporting the validity of the BRFSS data for others. Conclusions Limitations of the examination of the BRFSS were due to question differences among surveys used as comparisons, as well as mode of data

Construct Validity and Reliability of College Students' Responses to the Reasons for Smoking Scale

ERIC Educational Resources Information Center

Fiala, Kelly Ann; D'Abundo, Michelle Lee; Marinaro, Laura Marie

2010-01-01

When utilizing self-assessments to determine motives for health behaviors, it is essential that the resulting data demonstrate sound psychometric properties. The purpose of this research was to assess the reliability and construct validity of college students' responses to the Reasons for Smoking Scale (RFS). Confirmatory factor analyses and…

Revised scoring and improved reliability for the Communication Patterns Questionnaire.

PubMed

Crenshaw, Alexander O; Christensen, Andrew; Baucom, Donald H; Epstein, Norman B; Baucom, Brian R W

2017-07-01

The Communication Patterns Questionnaire (CPQ; Christensen, 1987) is a widely used self-report measure of couple communication behavior and is well validated for assessing the demand/withdraw interaction pattern, which is a robust predictor of poor relationship and individual outcomes (Schrodt, Witt, & Shimkowski, 2014). However, no studies have examined the CPQ's factor structure using analytic techniques sufficient by modern standards, nor have any studies replicated the factor structure using additional samples. Further, the current scoring system uses fewer than half of the total items for its 4 subscales, despite the existence of unused items that have content conceptually consistent with those subscales. These characteristics of the CPQ have likely contributed to findings that subscale scores are often troubled by suboptimal psychometric properties such as low internal reliability (e.g., Christensen, Eldridge, Catta-Preta, Lim, & Santagata, 2006). The present study uses exploratory and confirmatory factor analyses on 4 samples to reexamine the factor structure of the CPQ to improve scale score reliability and to determine if including more items in the subscales is warranted. Results indicate that a 3-factor solution (constructive communication and 2 demand/withdraw scales) provides the best fit for the data. That factor structure was confirmed in the replication samples. Compared with the original scales, the revised scales include additional items that expand the conceptual range of the constructs, substantially improve reliability of scale scores, and demonstrate stronger associations with relationship satisfaction and sensitivity to change in therapy. Implications for research and treatment are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Reliability of intracerebral hemorrhage classification systems: A systematic review.

PubMed

Rannikmäe, Kristiina; Woodfield, Rebecca; Anderson, Craig S; Charidimou, Andreas; Chiewvit, Pipat; Greenberg, Steven M; Jeng, Jiann-Shing; Meretoja, Atte; Palm, Frederic; Putaala, Jukka; Rinkel, Gabriel Je; Rosand, Jonathan; Rost, Natalia S; Strbian, Daniel; Tatlisumak, Turgut; Tsai, Chung-Fen; Wermer, Marieke Jh; Werring, David; Yeh, Shin-Joe; Al-Shahi Salman, Rustam; Sudlow, Cathie Lm

2016-08-01

Accurately distinguishing non-traumatic intracerebral hemorrhage (ICH) subtypes is important since they may have different risk factors, causal pathways, management, and prognosis. We systematically assessed the inter- and intra-rater reliability of ICH classification systems. We sought all available reliability assessments of anatomical and mechanistic ICH classification systems from electronic databases and personal contacts until October 2014. We assessed included studies' characteristics, reporting quality and potential for bias; summarized reliability with kappa value forest plots; and performed meta-analyses of the proportion of cases classified into each subtype. We included 8 of 2152 studies identified. Inter- and intra-rater reliabilities were substantial to perfect for anatomical and mechanistic systems (inter-rater kappa values: anatomical 0.78-0.97 [six studies, 518 cases], mechanistic 0.89-0.93 [three studies, 510 cases]; intra-rater kappas: anatomical 0.80-1 [three studies, 137 cases], mechanistic 0.92-0.93 [two studies, 368 cases]). Reporting quality varied but no study fulfilled all criteria and none was free from potential bias. All reliability studies were performed with experienced raters in specialist centers. Proportions of ICH subtypes were largely consistent with previous reports suggesting that included studies are appropriately representative. Reliability of existing classification systems appears excellent but is unknown outside specialist centers with experienced raters. Future reliability comparisons should be facilitated by studies following recently published reporting guidelines. © 2016 World Stroke Organization.

The relationship between cost estimates reliability and BIM adoption: SEM analysis

NASA Astrophysics Data System (ADS)

Ismail, N. A. A.; Idris, N. H.; Ramli, H.; Rooshdi, R. R. Raja Muhammad; Sahamir, S. R.

2018-02-01

This paper presents the usage of Structural Equation Modelling (SEM) approach in analysing the effects of Building Information Modelling (BIM) technology adoption in improving the reliability of cost estimates. Based on the questionnaire survey results, SEM analysis using SPSS-AMOS application examined the relationships between BIM-improved information and cost estimates reliability factors, leading to BIM technology adoption. Six hypotheses were established prior to SEM analysis employing two types of SEM models, namely the Confirmatory Factor Analysis (CFA) model and full structural model. The SEM models were then validated through the assessment on their uni-dimensionality, validity, reliability, and fitness index, in line with the hypotheses tested. The final SEM model fit measures are: P-value=0.000, RMSEA=0.079<0.08, GFI=0.824, CFI=0.962>0.90, TLI=0.956>0.90, NFI=0.935>0.90 and ChiSq/df=2.259; indicating that the overall index values achieved the required level of model fitness. The model supports all the hypotheses evaluated, confirming that all relationship exists amongst the constructs are positive and significant. Ultimately, the analysis verified that most of the respondents foresee better understanding of project input information through BIM visualization, its reliable database and coordinated data, in developing more reliable cost estimates. They also perceive to accelerate their cost estimating task through BIM adoption.

Job Hazard Analyses for Musculoskeletal Disorder Risk Factors in Pressing Operations of Dry-cleaning Establishments.

PubMed

Park, Jung-Keun

2016-12-01

Job hazard analyses were conducted to assess exposure to musculoskeletal disorder (MSD) risk factors in seven workers of three dry-cleaning establishments. In accordance with the Washington State Ergonomics Rule, the analyses were performed in two separate steps: (1) observation and checklist approaches were made to identify a "caution zone job" in the seven workers' pressing operations across the three shops; and (2) detailed posture and motion analyses were undertaken to determine a "MSD hazard" in one worker's operation using a video technique. One "caution zone job" was identified and it was the pressing operation job in which five physical risk factors were found in the pressing operations. The detailed analyses confirmed that one "MSD hazard", i.e., awkward posture in shoulders, was prevalent in the pressing operations of the three dry-cleaning facilities. It would be desirable to reduce MSD risk factors including awkward shoulder posture in the dry-cleaning industry.

Using Dynamic Risk and Protective Factors to Predict Inpatient Aggression: Reliability and Validity of START Assessments

PubMed Central

Desmarais, Sarah L.; Nicholls, Tonia L.; Wilson, Catherine M.; Brink, Johann

2012-01-01

The Short-Term Assessment of Risk and Treatability (START) is a relatively new structured professional judgment guide for the assessment and management of short-term risks associated with mental, substance use, and personality disorders. The scheme may be distinguished from other violence risk instruments because of its inclusion of 20 dynamic factors that are rated in terms of both vulnerability and strength. This study examined the reliability and validity of START assessments in predicting inpatient aggression. Research assistants completed START assessments for 120 male forensic psychiatric patients through review of hospital files. They additionally completed Historical-Clinical-Risk Management – 20 (HCR-20) and the Hare Psychopathy Checklist: Screening Version (PCL:SV) assessments. Outcome data was coded from hospital files for a 12-month follow-up period using the Overt Aggression Scale (OAS). START assessments evidenced excellent interrater reliability and demonstrated both predictive and incremental validity over the HCR-20 Historical subscale scores and PCL:SV total scores. Overall, results support the reliability and validity of START assessments, and use of the structured professional judgment approach more broadly, as well as the value of using dynamic risk and protective factors to assess violence risk. PMID:22250595

Measuring Socioeconomic Status and Environmental Factors in the SAYCARE Study in South America: Reliability of the Methods.

PubMed

De Moraes, Augusto Cesar Ferreira; Forkert, Elsie C O; Vilanova-Campelo, Regina Célia; González-Zapata, Laura Inés; Azzaretti, Leticia; Iguacel, Isabel; Huicho, Luis; Moliterno, Paula; Moreno, Luis Alberto; Carvalho, Heráclito Barbosa

2018-03-01

This paper aimed to test the reliability of two questionnaires in studies involving children and adolescents (aged 3-18 years) in seven South American cities. One assesses socioeconomic status (SES) and the other measures environmental factors. The SES questionnaire was composed of 14 questions, which included the presence of several consumer goods, domestic services, family income, parental education level, and current parental occupation status. The environmental questionnaire was composed of 15 questions to measure the social and infrastructure characteristics of the area of residence. Parents or guardians completed the questionnaires on behalf of their children. Adolescents answered the questions themselves for environmental factors, while those related to SES factors were answered by their parents or guardians. We analyzed the reliability of the questionnaires through kappa coefficient determination. Multilevel linear regression models were applied to calculate the correlation between the total household scores, the household income, and parents' education level. The environmental questionnaire showed good reproducibility in both age groups (k = 0.132-0.612 in children and k = 0.392-0.746 in adolescents). The SES questionnaire showed strong reliability in both age groups for all indicators (k = 0.52-1.00 in children and k = 0.296-0.964 in adolescents). Our multiple indicator questionnaires focused on environmental factors and SES in pediatric health surveys provided useful and easily applicable additional indicators to measure these important determinants of cardiovascular health. © 2018 The Obesity Society.

Demonstrating the Safety and Reliability of a New System or Spacecraft: Incorporating Analyses and Reviews of the Design and Processing in Determining the Number of Tests to be Conducted

NASA Technical Reports Server (NTRS)

Vesely, William E.; Colon, Alfredo E.

2010-01-01

Design Safety/Reliability is associated with the probability of no failure-causing faults existing in a design. Confidence in the non-existence of failure-causing faults is increased by performing tests with no failure. Reliability-Growth testing requirements are based on initial assurance and fault detection probability. Using binomial tables generally gives too many required tests compared to reliability-growth requirements. Reliability-Growth testing requirements are based on reliability principles and factors and should be used.

Examining the Factor Structure and Reliability of the Safe Patient Handling Perception Scale: An Initial Validation Study.

PubMed

White-Heisel, Regina; Canfield, James P; Young-Hughes, Sadie

Perceiving imminent safe patient handling and movement (SPH&M) dangers may reduce musculoskeletal (MSK) injuries for nurses in the workplace. The purpose of this study is to develop and validate the 17-item Safe Patient Handling Perception Scale (SPHPS) as an evaluation instrument assessing perceptual risk of MSK injury based on SPH&M knowledge, practice, and resource accessibility in the workplace. Data were collected from a convenience sample (N = 117) of nursing employees at a Veteran Affairs Medical Center. Factor analysis identified three factors: knowledge, practice, and accessibility. The SPHPS demonstrated high levels of reliability, supported by acceptable alpha scores (SPHM knowledge [α = .866], SPHM practices [α = .901], and access to SPHM resources [α = .855]), in addition to the relatively low standard error of measurement scores (SEM). The study outcomes suggest that the SPHPS is a valid and reliable tool that can measure participants' perceived risk factors for MSK injuries.

Merlino-Perkins Father-Daughter Relationship Inventory (MP-FDI): Construction, Reliability, Validity, and Implications for Counseling and Research

ERIC Educational Resources Information Center

Merlino Perkins, Rose J.

2008-01-01

The Merlino-Perkins Father-Daughter Relationship Inventory, a self-report instrument, assesses women's childhood interactions with supportive, doting, distant, controlling, tyrannical, physically abusive, absent, and seductive fathers. Item and scale development, psychometric findings drawn from factor analyses, reliability assessments, and…

Complementary exploratory and confirmatory factor analyses of the French WISC-V: Analyses based on the standardization sample.

PubMed

Lecerf, Thierry; Canivez, Gary L

2018-06-01

Interpretation of the French Wechsler Intelligence Scale for Children-Fifth Edition (French WISC-V; Wechsler, 2016a) is based on a 5-factor model including Verbal Comprehension (VC), Visual Spatial (VS), Fluid Reasoning (FR), Working Memory (WM), and Processing Speed (PS). Evidence for the French WISC-V factorial structure was established exclusively through confirmatory factor analyses (CFAs). However, as recommended by Carroll (1995); Reise (2012), and Brown (2015), factorial structure should derive from both exploratory factor analysis (EFA) and CFA. The first goal of this study was to examine the factorial structure of the French WISC-V using EFA. The 15 French WISC-V primary and secondary subtest scaled scores intercorrelation matrix was used and factor extraction criteria suggested from 1 to 4 factors. To disentangle the contribution of first- and second-order factors, the Schmid and Leiman (1957) orthogonalization transformation (SLT) was applied. Overall, no EFA evidence for 5 factors was found. Results indicated that the g factor accounted for about 67% of the common variance and that the contributions of the first-order factors were weak (3.6 to 11.9%). CFA was used to test numerous alternative models. Results indicated that bifactor models produced better fit to these data than higher-order models. Consistent with previous studies, findings suggested dominance of the general intelligence factor and that users should thus emphasize the Full Scale IQ (FSIQ) when interpreting the French WISC-V. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Reliability of self-reported childhood physical abuse by adults and factors predictive of inconsistent reporting.

PubMed

McKinney, Christy M; Harris, T Robert; Caetano, Raul

2009-01-01

Little is known about the reliability of self-reported child physical abuse (CPA) or CPA reporting practices. We estimated reliability and prevalence of self-reported CPA and identified factors predictive of inconsistent CPA reporting among 2,256 participants using surveys administered in 1995 and 2000. Reliability of CPA was fair to moderate (kappa = 0.41). Using a positive report from either survey, the prevalence of moderate (61.8%) and severe (12.0%) CPA was higher than at either survey alone. Compared to consistent reporters of having experienced CPA, inconsistent reporters were less likely to be > or = 30 years old (vs. 18-29) or Black (vs. White) and more likely to have < 12 years of education (vs. 12), have no alcohol-related problems (vs. having problems), or report one type (vs. > or = 2) of CPA. These findings may assist researchers conducting and interpreting studies of CPA.

Bulk electric system reliability evaluation incorporating wind power and demand side management

NASA Astrophysics Data System (ADS)

Huang, Dange

Electric power systems are experiencing dramatic changes with respect to structure, operation and regulation and are facing increasing pressure due to environmental and societal constraints. Bulk electric system reliability is an important consideration in power system planning, design and operation particularly in the new competitive environment. A wide range of methods have been developed to perform bulk electric system reliability evaluation. Theoretically, sequential Monte Carlo simulation can include all aspects and contingencies in a power system and can be used to produce an informative set of reliability indices. It has become a practical and viable tool for large system reliability assessment technique due to the development of computing power and is used in the studies described in this thesis. The well-being approach used in this research provides the opportunity to integrate an accepted deterministic criterion into a probabilistic framework. This research work includes the investigation of important factors that impact bulk electric system adequacy evaluation and security constrained adequacy assessment using the well-being analysis framework. Load forecast uncertainty is an important consideration in an electrical power system. This research includes load forecast uncertainty considerations in bulk electric system reliability assessment and the effects on system, load point and well-being indices and reliability index probability distributions are examined. There has been increasing worldwide interest in the utilization of wind power as a renewable energy source over the last two decades due to enhanced public awareness of the environment. Increasing penetration of wind power has significant impacts on power system reliability, and security analyses become more uncertain due to the unpredictable nature of wind power. The effects of wind power additions in generating and bulk electric system reliability assessment considering site wind speed

Factor structure, validity and reliability of the Cambridge Worry Scale in a pregnant population.

PubMed

Green, Josephine M; Kafetsios, Konstantinos; Statham, Helen E; Snowdon, Claire M

2003-11-01

This article presents the Cambridge Worry Scale (CWS), a content-based measure for assessing worries, and discusses its psychometric properties based on a longitudinal study of 1,207 pregnant women. Principal components analysis revealed a four-factor structure of women's concerns during pregnancy: socio-medical, own health, socio-economic and relational. The measure demonstrated good reliability and validity. Total CWS scores were strongly associated with state and trait anxiety (convergent validity) but also had significant and unique predictive value for mood outcomes (discriminant validity). The CWS discriminated better between women with different reproductive histories than measures of state and trait anxiety. We conclude that the CWS is a reliable and valid tool for assessing the extent and content of worries in specific situations.

Reliability studies of Integrated Modular Engine system designs

NASA Technical Reports Server (NTRS)

Hardy, Terry L.; Rapp, Douglas C.

1993-01-01

A study was performed to evaluate the reliability of Integrated Modular Engine (IME) concepts. Comparisons were made between networked IME systems and non-networked discrete systems using expander cycle configurations. Both redundant and non-redundant systems were analyzed. Binomial approximation and Markov analysis techniques were employed to evaluate total system reliability. In addition, Failure Modes and Effects Analyses (FMEA), Preliminary Hazard Analyses (PHA), and Fault Tree Analysis (FTA) were performed to allow detailed evaluation of the IME concept. A discussion of these system reliability concepts is also presented.

Reliability studies of integrated modular engine system designs

NASA Technical Reports Server (NTRS)

Hardy, Terry L.; Rapp, Douglas C.

1993-01-01

A study was performed to evaluate the reliability of Integrated Modular Engine (IME) concepts. Comparisons were made between networked IME systems and non-networked discrete systems using expander cycle configurations. Both redundant and non-redundant systems were analyzed. Binomial approximation and Markov analysis techniques were employed to evaluate total system reliability. In addition, Failure Modes and Effects Analyses (FMEA), Preliminary Hazard Analyses (PHA), and Fault Tree Analysis (FTA) were performed to allow detailed evaluation of the IME concept. A discussion of these system reliability concepts is also presented.

Reliability studies of integrated modular engine system designs

NASA Astrophysics Data System (ADS)

Hardy, Terry L.; Rapp, Douglas C.

1993-06-01

A study was performed to evaluate the reliability of Integrated Modular Engine (IME) concepts. Comparisons were made between networked IME systems and non-networked discrete systems using expander cycle configurations. Both redundant and non-redundant systems were analyzed. Binomial approximation and Markov analysis techniques were employed to evaluate total system reliability. In addition, Failure Modes and Effects Analyses (FMEA), Preliminary Hazard Analyses (PHA), and Fault Tree Analysis (FTA) were performed to allow detailed evaluation of the IME concept. A discussion of these system reliability concepts is also presented.

Reliability studies of Integrated Modular Engine system designs

NASA Astrophysics Data System (ADS)

Hardy, Terry L.; Rapp, Douglas C.

1993-06-01

A study was performed to evaluate the reliability of Integrated Modular Engine (IME) concepts. Comparisons were made between networked IME systems and non-networked discrete systems using expander cycle configurations. Both redundant and non-redundant systems were analyzed. Binomial approximation and Markov analysis techniques were employed to evaluate total system reliability. In addition, Failure Modes and Effects Analyses (FMEA), Preliminary Hazard Analyses (PHA), and Fault Tree Analysis (FTA) were performed to allow detailed evaluation of the IME concept. A discussion of these system reliability concepts is also presented.

Comparison of Reliability Measures under Factor Analysis and Item Response Theory

ERIC Educational Resources Information Center

Cheng, Ying; Yuan, Ke-Hai; Liu, Cheng

2012-01-01

Reliability of test scores is one of the most pervasive psychometric concepts in measurement. Reliability coefficients based on a unifactor model for continuous indicators include maximal reliability rho and an unweighted sum score-based omega, among many others. With increasing popularity of item response theory, a parallel reliability measure pi…

Assessment of family functioning in Caucasian and Hispanic Americans: reliability, validity, and factor structure of the Family Assessment Device.

PubMed

Aarons, Gregory A; McDonald, Elizabeth J; Connelly, Cynthia D; Newton, Rae R

2007-12-01

The purpose of this study was to examine the factor structure, reliability, and validity of the Family Assessment Device (FAD) among a national sample of Caucasian and Hispanic American families receiving public sector mental health services. A confirmatory factor analysis conducted to test model fit yielded equivocal findings. With few exceptions, indices of model fit, reliability, and validity were poorer for Hispanic Americans compared with Caucasian Americans. Contrary to our expectation, an exploratory factor analysis did not result in a better fitting model of family functioning. Without stronger evidence supporting a reformulation of the FAD, we recommend against such a course of action. Findings highlight the need for additional research on the role of culture in measurement of family functioning.

Reliability of Computerized Neurocognitive Tests for Concussion Assessment: A Meta-Analysis.

PubMed

Farnsworth, James L; Dargo, Lucas; Ragan, Brian G; Kang, Minsoo

2017-09-01

  Although widely used, computerized neurocognitive tests (CNTs) have been criticized because of low reliability and poor sensitivity. A systematic review was published summarizing the reliability of Immediate Post-Concussion Assessment and Cognitive Testing (ImPACT) scores; however, this was limited to a single CNT. Expansion of the previous review to include additional CNTs and a meta-analysis is needed. Therefore, our purpose was to analyze reliability data for CNTs using meta-analysis and examine moderating factors that may influence reliability.   A systematic literature search (key terms: reliability, computerized neurocognitive test, concussion) of electronic databases (MEDLINE, PubMed, Google Scholar, and SPORTDiscus) was conducted to identify relevant studies.   Studies were included if they met all of the following criteria: used a test-retest design, involved at least 1 CNT, provided sufficient statistical data to allow for effect-size calculation, and were published in English.   Two independent reviewers investigated each article to assess inclusion criteria. Eighteen studies involving 2674 participants were retained. Intraclass correlation coefficients were extracted to calculate effect sizes and determine overall reliability. The Fisher Z transformation adjusted for sampling error associated with averaging correlations. Moderator analyses were conducted to evaluate the effects of the length of the test-retest interval, intraclass correlation coefficient model selection, participant demographics, and study design on reliability. Heterogeneity was evaluated using the Cochran Q statistic.   The proportion of acceptable outcomes was greatest for the Axon Sports CogState Test (75%) and lowest for the ImPACT (25%). Moderator analyses indicated that the type of intraclass correlation coefficient model used significantly influenced effect-size estimates, accounting for 17% of the variation in reliability.   The Axon Sports CogState Test, which

Workplace incivility in Japan: Reliability and validity of the Japanese version of the modified Work Incivility Scale.

PubMed

Tsuno, Kanami; Kawakami, Norito; Shimazu, Akihito; Shimada, Kyoko; Inoue, Akiomi; P Leiter, Michael

2017-05-25

Although incivility is a common interpersonal mistreatment and associated with poor mental health, there are few studies about it in Asian countries. The aim of this study was to develop the Japanese version of the modified Work Incivility Scale (J-MWIS), investigate its reliability and validity, and reveal the prevalence of incivility among Japanese employees in comparison with data on Canadian employees. A total of 2,191 Japanese and 1,071 Canadian employees were surveyed, using either the J-MWIS or MWIS. Japanese employees additionally answered questions on civility, worksite social support, workplace bullying, psychological distress, intention to leave, and work engagement to investigate construct validity. At least one form of workplace incivility was experienced by both Japanese (52.3%) and Canadian (86.0%) employees in the previous month. Internal consistency reliability of the J-MWIS was acceptable (α=0.71-0.81), and correlation analyses also confirmed its construct validity as expected. Workplace incivility was associated with lower workgroup civility, lower supervisor and coworker support, higher workplace bullying, higher psychological distress, higher intention to leave, and lower work engagement. Confirmatory factor analyses showed that the original three-factor model (supervisor incivility, coworker incivility, and instigated incivility) fitted moderately in both Japan and Canada data, though the privacy/overfamiliarity factor was additionally extracted from exploratory factor analysis for the J-MWIS. The results of this study suggested that the J-MWIS has moderate internal consistency reliability and good construct validity.

Workplace incivility in Japan: Reliability and validity of the Japanese version of the modified Work Incivility Scale

PubMed Central

Tsuno, Kanami; Kawakami, Norito; Shimazu, Akihito; Shimada, Kyoko; Inoue, Akiomi; P. Leiter, Michael

2017-01-01

Objectives: Although incivility is a common interpersonal mistreatment and associated with poor mental health, there are few studies about it in Asian countries. The aim of this study was to develop the Japanese version of the modified Work Incivility Scale (J-MWIS), investigate its reliability and validity, and reveal the prevalence of incivility among Japanese employees in comparison with data on Canadian employees. Methods: A total of 2,191 Japanese and 1,071 Canadian employees were surveyed, using either the J-MWIS or MWIS. Japanese employees additionally answered questions on civility, worksite social support, workplace bullying, psychological distress, intention to leave, and work engagement to investigate construct validity. Results: At least one form of workplace incivility was experienced by both Japanese (52.3%) and Canadian (86.0%) employees in the previous month. Internal consistency reliability of the J-MWIS was acceptable (α=0.71-0.81), and correlation analyses also confirmed its construct validity as expected. Workplace incivility was associated with lower workgroup civility, lower supervisor and coworker support, higher workplace bullying, higher psychological distress, higher intention to leave, and lower work engagement. Confirmatory factor analyses showed that the original three-factor model (supervisor incivility, coworker incivility, and instigated incivility) fitted moderately in both Japan and Canada data, though the privacy/overfamiliarity factor was additionally extracted from exploratory factor analysis for the J-MWIS. Conclusions: The results of this study suggested that the J-MWIS has moderate internal consistency reliability and good construct validity. PMID:28302927

Measurement characteristics of the levels of institutionalization scales: examining reliability and validity.

PubMed

Barab, S A; Redman, B K; Froman, R D

1998-01-01

The Level of Institutionalization (LoIn) scales were developed to assess the extent to which a health promotion program has become integrated into a health care organization. The instrument was designed specifically to measure the amount of routinization and niche saturation of four subsystems (production, maintenance, supportive, and managerial) believed to make up an organization. In this study, the LoIn scales were completed for diabetes programs in 102 general hospitals and 30 home health agencies in Maryland and Pennsylvania. Reliability estimates across the four subsystems for routines (alpha = .61) and for niche saturation (alpha = .44) were substandard. Average correlation among the four subsystems for routines was .67, and among the four subsystems for niche saturation was .38, indicating moderate to large amounts of shared variance among subsystems and challenging claims of discriminant validity. Given these large correlations and a poor fit when testing the eight-factor model, higher-order confirmatory factor analyses were carried out. Results supported the existence of two second-order factors. When collapsed into two factors, the reliabilities were adequate (routines alpha = .90; niche saturation alpha = .80). Criterion-related validity also was found between length of program existence and the routine factor.

Estimate of the Reliability in Geological Forecasts for Tunnels: Toward a Structured Approach

NASA Astrophysics Data System (ADS)

Perello, Paolo

2011-11-01

In tunnelling, a reliable geological model often allows providing an effective design and facing the construction phase without unpleasant surprises. A geological model can be considered reliable when it is a valid support to correctly foresee the rock mass behaviour, therefore preventing unexpected events during the excavation. The higher the model reliability, the lower the probability of unforeseen rock mass behaviour. Unfortunately, owing to different reasons, geological models are affected by uncertainties and a fully reliable knowledge of the rock mass is, in most cases, impossible. Therefore, estimating to which degree a geological model is reliable, becomes a primary requirement in order to save time and money and to adopt the appropriate construction strategy. The definition of the geological model reliability is often achieved by engineering geologists through an unstructured analytical process and variable criteria. This paper focusses on geological models for projects of linear underground structures and represents an effort to analyse and include in a conceptual framework the factors influencing such models. An empirical parametric procedure is then developed with the aim of obtaining an index called "geological model rating (GMR)", which can be used to provide a more standardised definition of a geological model reliability.

Reliability and validity of the Outcome Expectations for Exercise Scale-2.

PubMed

Resnick, Barbara

2005-10-01

Development of a reliable and valid measure of outcome expectations for exercise for older adults will help establish the relationship between outcome expectations and exercise and facilitate the development of interventions to increase physical activity in older adults. The purpose of this study was to test the reliability and validity of the Outcome Expectations for Exercise-2 Scale (OEE-2), a 13-item measure with two subscales: positive OEE (POEE) and negative OEE (NOEE). The OEE-2 scale was given to 161 residents in a continuing-care retirement community. There was some evidence of validity based on confirmatory factor analysis, Rasch-analysis INFIT and OUTFIT statistics, and convergent validity and test criterion relationships. There was some evidence for reliability of the OEE-2 based on alpha coefficients, person- and item-separation reliability indexes, and R(2)values. Based on analyses, suggested revisions are provided for future use of the OEE-2. Although ongoing reliability and validity testing are needed, the OEE-2 scale can be used to identify older adults with low outcome expectations for exercise, and interventions can then be implemented to strengthen these expectations and improve exercise behavior.

Is there a reliable factorial structure in the 20-item Toronto Alexithymia Scale? A comparison of factor models in clinical and normal adult samples.

PubMed

Müller, Jochen; Bühner, Markus; Ellgring, Heiner

2003-12-01

The 20-item Toronto Alexithymia Scale (TAS-20) is the most widely used instrument for measuring alexithymia. However, different studies did not always yield identical factor structures of this scale. The present study aims at clarifying some discrepant results. Maximum likelihood confirmatory factor analyses of a German version of the TAS-20 were conducted on data from a clinical sample (N=204) and a sample of normal adults (N=224). Five different models with one to four factors were compared. A four-factor model with factors (F1) "Difficulty identifying feelings" (F2), "Difficulty describing feelings" (F3), "Low importance of emotion" and (F4) "Pragmatic thinking" and a three-factor model with the combined factor "Difficulties in identifying and describing feelings" described the data best. Factors related to "externally oriented thinking" provided no acceptable level of reliability. Results from the present and other studies indicate that the factorial structure of the TAS-20 may vary across samples. Whether factor structures different from the common three-factor structure are an exception in some mainly clinical populations or a common phenomenon outside student populations has still to be determined. For a further exploration of the factor structure of the TAS-20 in different populations, it would be important not only to test the fit of the common three-factor model, but also to consider other competing solutions like the models of the present study.

Factor Analytic Validation of the Ford, Wolvin, and Chung Listening Competence Scale

ERIC Educational Resources Information Center

Mickelson, William T.; Welch, S. A.

2012-01-01

This research begins to independently and quantitatively validate the Ford, Wolvin, and Chung (2000) Listening Competency Scale. Reliability and Confirmatory Factor analyses were conducted on two independent samples. The reliability estimates were found to be below those reported by Ford, Wolvin, and Chung (2000) and below acceptable levels for…

Multisite Reliability of MR-Based Functional Connectivity

PubMed Central

Noble, Stephanie; Scheinost, Dustin; Finn, Emily S.; Shen, Xilin; Papademetris, Xenophon; McEwen, Sarah C.; Bearden, Carrie E.; Addington, Jean; Goodyear, Bradley; Cadenhead, Kristin S.; Mirzakhanian, Heline; Cornblatt, Barbara A.; Olvet, Doreen M.; Mathalon, Daniel H.; McGlashan, Thomas H.; Perkins, Diana O.; Belger, Aysenil; Seidman, Larry J.; Thermenos, Heidi; Tsuang, Ming T.; van Erp, Theo G.M.; Walker, Elaine F.; Hamann, Stephan; Woods, Scott W.; Cannon, Tyrone D.; Constable, R. Todd

2016-01-01

Recent years have witnessed an increasing number of multisite MRI functional connectivity (fcMRI) studies. While multisite studies are an efficient way to speed up data collection and increase sample sizes, especially for rare clinical populations, any effects of site or MRI scanner could ultimately limit power and weaken results. Little data exists on the stability of functional connectivity measurements across sites and sessions. In this study, we assess the influence of site and session on resting state functional connectivity measurements in a healthy cohort of traveling subjects (8 subjects scanned twice at each of 8 sites) scanned as part of the North American Prodrome Longitudinal Study (NAPLS). Reliability was investigated in three types of connectivity analyses: (1) seed-based connectivity with posterior cingulate cortex (PCC), right motor cortex (RMC), and left thalamus (LT) as seeds; (2) the intrinsic connectivity distribution (ICD), a voxel-wise connectivity measure; and (3) matrix connectivity, a whole-brain, atlas-based approach assessing connectivity between nodes. Contributions to variability in connectivity due to subject, site, and day-of-scan were quantified and used to assess between-session (test-retest) reliability in accordance with Generalizability Theory. Overall, no major site, scanner manufacturer, or day-of-scan effects were found for the univariate connectivity analyses; instead, subject effects dominated relative to the other measured factors. However, summaries of voxel-wise connectivity were found to be sensitive to site and scanner manufacturer effects. For all connectivity measures, although subject variance was three times the site variance, the residual represented 60–80% of the variance, indicating that connectivity differed greatly from scan to scan independent of any of the measured factors (i.e., subject, site, and day-of-scan). Thus, for a single 5 min scan, reliability across connectivity measures was poor (ICC=0.07–0

Reliability and validity of the Treatment Satisfaction Questionnaire for Medication among Portuguese-speaking Brazilian patients with hypertension.

PubMed

Sauer Liberato, Ana Carolina; Cunha Matheus Rodrigues, Roberta; Kim, MyoungJin; Mallory, Caroline

2016-07-01

This study examined the reliability and validity of the Brazilian Portuguese version of the Treatment Satisfaction Questionnaire for Medication (version 1.4) among patients with hypertension. Understanding the patient experience with treatment satisfaction will contribute to improved medication adherence and control of hypertension. Hypertension is a serious problem in Brazil that is associated with chronic illness controlled, in part, by consistent adherence to medications. Patient satisfaction with medication treatment is associated with adherence to medication. The Treatment Satisfaction Questionnaire for Medication (version 1.4) is a promising instrument for measuring medication; however, to date there has been no report of the reliability and validity of the instrument with Portuguese-speaking adults with hypertension in Brazil. Cross-sectional descriptive exploratory study. A convenience sample of 300 patients with hypertension in an outpatient setting in the southeast region of São Paulo state in Brazil completed the Treatment Satisfaction Questionnaire for Medication (version 1.4). The instrument, comprised of four subscales, was evaluated for reliability using correlation analyses and internal consistency. Confirmatory factor analysis was used to determine factorial validity. Correlational analyses, internal consistency (Cronbach's alpha) and hierarchical confirmatory factor analysis demonstrate adequate support for the four-factor dimensionality, reliability and factorial validity of the Treatment Satisfaction Questionnaire for Medication (version 1.4). This study provides modest evidence for internal consistency and factorial validity of the Treatment Satisfaction Questionnaire for Medication (version 1.4) in Portuguese-speaking adult Brazilians with hypertension. Future testing should focus on extending reliability testing, discriminant validity and potential translation and literacy issues in this population. Within known limitations, clinicians will

Validity and Reliability of the Turkish Version of the DSM-5 Posttraumatic Stress Symptom Severity Scale-Child Form.

PubMed

Yalin Sapmaz, Şermin; Ergin, Dilek; Özek Erkuran, Handan; Şen Celasin, Nesrin; Öztürk, Masum; Karaarslan, Duygu; Köroğlu, Ertuğrul; Aydemir, Ömer

2017-09-01

This study assessed the validity and reliability of the Turkish version of the DSM-5 Posttraumatic Stress Symptom Severity Scale-Child Form for use among the Turkish population. The study group consisted of 30 patients that had been treated in a child psychiatry unit and diagnosed with posttraumatic stress disorder and 83 healthy volunteers that were attending middle or high school during the study period. For reliability analyses, the internal consistency coefficient and the test-retest correlation coefficient were measured. For validity analyses, the exploratory factor analysis and correlation analysis with the Child Posttraumatic Stress Reaction Index for concurrent validity were measured. The Cronbach's alpha (the internal consistency coefficient) of the scale was 0.909, and the test-retest correlation coefficient was 0.663. One factor that could explain 58.5% of the variance was obtained and was congruent with the original construct of the scale. As for concurrent validity, the scale showed high correlation with the Child Posttraumatic Stress Reaction Index. It was concluded that the Turkish version of the DSM-5 Posttraumatic Stress Symptom Severity Scale-Child Form can be used as a valid and reliable tool.

Investigating the Reliability and Factor Structure of Kalichman's "Survey 2: Research Misconduct" Questionnaire: A Post Hoc Analysis Among Biomedical Doctoral Students in Scandinavia.

PubMed

Holm, Søren; Hofmann, Bjørn

2017-10-01

A precondition for reducing scientific misconduct is evidence about scientists' attitudes. We need reliable survey instruments, and this study investigates the reliability of Kalichman's "Survey 2: research misconduct" questionnaire. The study is a post hoc analysis of data from three surveys among biomedical doctoral students in Scandinavia (2010-2015). We perform reliability analysis, and exploratory and confirmatory factor analysis using a split-sample design as a partial validation. The results indicate that a reliable 13-item scale can be formed (Cronbach's α = .705), and factor analysis indicates that there are four reliable subscales each tapping a different construct: (a) general attitude to misconduct (α = .768), (b) attitude to personal misconduct (α = .784), (c) attitude to whistleblowing (α = .841), and (d) attitude to blameworthiness/punishment (α = .877). A full validation of the questionnaire requires further research. We, nevertheless, hope that the results will facilitate the increased use of the questionnaire in research.

Applicability and Limitations of Reliability Allocation Methods

NASA Technical Reports Server (NTRS)

Cruz, Jose A.

2016-01-01

Reliability allocation process may be described as the process of assigning reliability requirements to individual components within a system to attain the specified system reliability. For large systems, the allocation process is often performed at different stages of system design. The allocation process often begins at the conceptual stage. As the system design develops, more information about components and the operating environment becomes available, different allocation methods can be considered. Reliability allocation methods are usually divided into two categories: weighting factors and optimal reliability allocation. When properly applied, these methods can produce reasonable approximations. Reliability allocation techniques have limitations and implied assumptions that need to be understood by system engineers. Applying reliability allocation techniques without understanding their limitations and assumptions can produce unrealistic results. This report addresses weighting factors, optimal reliability allocation techniques, and identifies the applicability and limitations of each reliability allocation technique.

Reliability and Validity of the Work and Well-Being Inventory (WBI) for Employees.

PubMed

Vendrig, A A; Schaafsma, F G

2018-06-01

Purpose The purpose of this study is to measure the psychometric properties of the Work and Wellbeing Inventory (WBI) (in Dutch: VAR-2), a screening tool that is used within occupational health care and rehabilitation. Our research question focused on the reliability and validity of this inventory. Methods Over the years seven different samples of workers, patients and sick listed workers varying in size between 89 and 912 participants (total: 2514), were used to measure the test-retest reliability, the internal consistency, the construct and concurrent validity, and the criterion and predictive validity. Results The 13 scales displayed good internal consistency and test-retest reliability. The constructive validity of the WBI could clearly be demonstrated in both patients and healthy workers. Confirmative factor analyses revealed a CFI >.90 for all scales. The depression scale predicted future work absenteeism (>6 weeks) because of a common mental disorder in healthy workers. The job strain scale and the illness behavior scale predicted long term absenteeism (>3 months) in workers with short-term absenteeism. The illness behavior scale moderately predicted return to work in rehab patients attending an intensive multidisciplinary program. Conclusions The WBI is a valid and reliable tool for occupational health practitioners to screen for risk factors for prolonged or future sickness absence. With this tool they will have reliable indications for further advice and interventions to restore the work ability.

Parts and Components Reliability Assessment: A Cost Effective Approach

NASA Technical Reports Server (NTRS)

Lee, Lydia

2009-01-01

System reliability assessment is a methodology which incorporates reliability analyses performed at parts and components level such as Reliability Prediction, Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA) to assess risks, perform design tradeoffs, and therefore, to ensure effective productivity and/or mission success. The system reliability is used to optimize the product design to accommodate today?s mandated budget, manpower, and schedule constraints. Stand ard based reliability assessment is an effective approach consisting of reliability predictions together with other reliability analyses for electronic, electrical, and electro-mechanical (EEE) complex parts and components of large systems based on failure rate estimates published by the United States (U.S.) military or commercial standards and handbooks. Many of these standards are globally accepted and recognized. The reliability assessment is especially useful during the initial stages when the system design is still in the development and hard failure data is not yet available or manufacturers are not contractually obliged by their customers to publish the reliability estimates/predictions for their parts and components. This paper presents a methodology to assess system reliability using parts and components reliability estimates to ensure effective productivity and/or mission success in an efficient manner, low cost, and tight schedule.

Validity and reliability of the persian version of templer death anxiety scale in family caregivers of cancer patients.

PubMed

Soleimani, Mohammad Ali; Bahrami, Nasim; Yaghoobzadeh, Ameneh; Banihashemi, Hedieh; Nia, Hamid Sharif; Haghdoost, Ali Akbar

2016-01-01

Due to increasing recognition of the importance of death anxiety for understanding human nature, it is important that researchers who investigate death anxiety have reliable and valid methodology to measure. The purpose of this study was to evaluate the validity and reliability of the Persian version of Templer Death Anxiety Scale (TDAS) in family caregivers of cancer patients. A sample of 326 caregivers of cancer patients completed a 15-item questionnaire. Principal components analysis (PCA) followed by a varimax rotation was used to assess factor structure of the DAS. The construct validity of the scale was assessed using exploratory and confirmatory factor analyses. Convergent and discriminant validity were also examined. Reliability was assessed with Cronbach's alpha coefficients and construction reliability. Based on the results of the PCA and consideration of the meaning of our items, a three-factor solution, explaining 60.38% of the variance, was identified. A confirmatory factor analysis (CFA) then supported the adequacy of the three-domain structure of the DAS. Goodness-of-fit indices showed an acceptable fit overall with the full model {χ(2)(df) = 262.32 (61), χ(2)/df = 2.04 [adjusted goodness of fit index (AGFI) = 0.922, parsimonious comparative fit index (PCFI) = 0.703, normed fit Index (NFI) = 0.912, CMIN/DF = 2.048, root mean square error of approximation (RMSEA) = 0.055]}. Convergent and discriminant validity were shown with construct fulfilled. The Cronbach's alpha and construct reliability were greater than 0.70. The findings show that the Persian version of the TDAS has a three-factor structure and acceptable validity and reliability.

Test-retest reliability of the underlying latent factor structure of alcohol subjective response.

PubMed

Lutz, Joseph A; Childs, Emma

2017-04-01

Alcohol subjective experiences are multi-dimensional and demonstrate wide inter-individual variability. Recent efforts have sought to establish a clearer understanding of subjective alcohol responses by identifying core constructs derived from multiple measurement instruments. The aim of this study was to evaluate the temporal stability of this approach to conceptualizing alcohol subjective experiences across successive alcohol administrations in the same individuals. Healthy moderate alcohol drinkers (n = 104) completed six experimental sessions each, three with alcohol (0.8 g/kg), and three with a non-alcoholic control beverage. Participants reported subjective mood and drug effects using standardized questionnaires before and at repeated times after beverage consumption. We explored the underlying latent structure of subjective responses for all alcohol administrations using exploratory factor analysis and then tested measurement invariance over the three successive administrations using multi-group confirmatory factor analyses. Exploratory factor analyses on responses to alcohol across all administrations yielded four factors representing "Positive mood," "Sedation," "Stimulation/Euphoria," and "Drug effects and Urges." A confirmatory factor analysis on the separate administrations indicated acceptable configural and metric invariance and moderate scalar invariance. In this study, we demonstrate temporal stability of the underlying constructs of subjective alcohol responses derived from factor analysis. These findings strengthen the utility of this approach to conceptualizing subjective alcohol responses especially for use in prospective and longitudinal alcohol challenge studies relating subjective response to alcohol use disorder risk.

Reliability and validity of the adapted Resistance Training Skills Battery for Children.

PubMed

Furzer, Bonnie J; Bebich-Philip, Marc D; Wright, Kemi E; Reid, Siobhan L; Thornton, Ashleigh L

2017-12-29

Resistance training (RT) is emerging as a training modality to improve motor function and facilitate physical activity participation in children across the motor proficiency spectrum. Although RT competency assessments have been established and validated among adolescent cohorts, the extent to which these methods are suitable for assessing children's RT skills is unknown. This project aimed to assess the psychometric properties of the adapted Resistance Training Skills Battery for Children (RTSBc), in children with varying motor proficiency. Repeated measures design with 40 participants (M age=8.2±1.7years) displaying varying levels of motor proficiency. Participants performed the adapted RTSBc on two occasions, receiving a score for their execution of each component, in addition to an overall RT skill quotient child (RTSQc). Cronbach's alpha, intra-class correlation (ICC), Bland-Altman analysis, and typical error were used to assess test-retest reliability. To examine construct validity, exploratory factor analysis was performed alongside computing correlations between participants' muscle strength, motor proficiency, age, lean muscle mass, and RTSQc. The RTSBc displayed an acceptable level of internal consistency (alpha=0.86) and test-retest reliability (ICC range=0.86-0.99). Exploratory factor analysis supported internal test structure, with all six RT skills loading strongly on a single factor (range 0.56-0.89). Analyses of structural validity revealed positive correlations for RTSQc in relation to motor proficiency (r=0.52, p<0.001) and strength scores (r=0.61, p<0.001). Analyses revealed support for the construct validity and test-retest reliability of the RTSBc, providing preliminary evidence that the RTSBc is appropriate for use in the assessment of children's RT competency. Copyright © 2018 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Reliability and validity of the Nurse Practitioners' Roles and Competencies Scale.

PubMed

Lin, Li-Chun; Lee, Sheuan; Ueng, Steve Wen-Neng; Tang, Woung-Ru

2016-01-01

The objective of this study was to test the reliability and construct validity of the Nurse Practitioners' Roles and Competencies Scale. The role of nurse practitioners has attracted international attention. The advanced nursing role played by nurse practitioners varies with national conditions and medical environments. To date, no suitable measurement tool has been available for assessing the roles and competencies of nurse practitioners in Asian countries. Secondary analysis of data from three studies related to nurse practitioners' role competencies. We analysed data from 563 valid questionnaires completed in three studies to identify the factor structure of the Nurse Practitioners' Roles and Competencies Scale. To this end, we performed exploratory factor analysis using principal component analysis extraction with varimax orthogonal rotation. The internal consistency reliabilities of the overall scale and its subscales were examined using Cronbach's alpha coefficient. The scale had six factors: professionalism, direct care, clinical research, practical guidance, medical assistance, as well as leadership and reform. These factors explained 67·5% of the total variance in nurse practitioners' role competencies. Cronbach's alpha coefficient for the overall scale was 0·98, and those of its subscales ranged from 0·83-0·97. The internal consistency reliability and construct validity of the Nurse Practitioners' Roles and Competencies Scale were good. The high internal consistency reliabilities suggest item redundancy, which should be minimised by using item response theory to enhance the applicability of this questionnaire for future academic and clinical studies. The Nurse Practitioners' Roles and Competencies Scale can be used as a tool for assessing the roles and competencies of nurse practitioners in Taiwan. Our findings can also serve as a reference for other Asian countries to develop the nurse practitioner role. © 2015 John Wiley & Sons Ltd.

Measuring Integrated Socioemotional Guidance at School: Factor Structure and Reliability of the Socioemotional Guidance Questionnaire (SEG-Q)

ERIC Educational Resources Information Center

Jacobs, Karen; Struyf, Elke

2013-01-01

Socioemotional guidance of students has recently become an integral part of education, however no instrument exists to measure integrated socioemotional guidance. This study therefore examines the factor structure and reliability of the Socioemotional Guidance Questionnaire. Psychometric properties of the Socioemotional Guidance Questionnaire and…

Analyses of factors of crash avoidance maneuvers using the general estimates system.

PubMed

Yan, Xuedong; Harb, Rami; Radwan, Essam

2008-06-01

Taking an effective corrective action to a critical traffic situation provides drivers an opportunity to avoid crash occurrence and minimize crash severity. The objective of this study is to investigate the relationship between the probability of taking corrective actions and the characteristics of drivers, vehicles, and driving environments. Using the 2004 GES crash database, this study classified drivers who encountered critical traffic events (identified as P_CRASH3 in the GES database) into two pre-crash groups: corrective avoidance actions group and no corrective avoidance actions group. Single and multiple logistic regression analyses were performed to identify potential traffic factors associated with the probability of drivers taking corrective actions. The regression results showed that the driver/vehicle factors associated with the probability of taking corrective actions include: driver age, gender, alcohol use, drug use, physical impairments, distraction, sight obstruction, and vehicle type. In particular, older drivers, female drivers, drug/alcohol use, physical impairment, distraction, or poor visibility may increase the probability of failing to attempt to avoid crashes. Moreover, drivers of larger size vehicles are 42.5% more likely to take corrective avoidance actions than passenger car drivers. On the other hand, the significant environmental factors correlated with the drivers' crash avoidance maneuver include: highway type, number of lanes, divided/undivided highway, speed limit, highway alignment, highway profile, weather condition, and surface condition. Some adverse highway environmental factors, such as horizontal curves, vertical curves, worse weather conditions, and slippery road surface conditions are correlated with a higher probability of crash avoidance maneuvers. These results may seem counterintuitive but they can be explained by the fact that motorists may be more likely to drive cautiously in those adverse driving environments. The

Understanding discharge data uncertainty and its consequences for analyses of spatial and temporal change in hydrological response

NASA Astrophysics Data System (ADS)

Westerberg, Ida

2017-04-01

Understanding and quantifying how hydrological response behaviour varies across catchments, or how catchments change with time requires reliable discharge data. For reliable estimation of spatial and temporal change, the change in the response behaviour needs to be larger than the uncertainty in the response behaviour estimates that are compared. Understanding how discharge data uncertainty varies between catchments and over time, and how these uncertainties propagate to information derived from the data, is therefore key to drawing the right conclusions in comparative analyses. Uncertainty in discharge data is often highly place-specific and reliable estimation depends on detailed analyses of the rating curve model and stage-discharge measurements used to calculate discharge time series from stage (water level) at the gauging station. This underlying information is often not available when discharge data is provided by monitoring agencies. However, even without detailed analyses, the chance that the discharge data would be uncertain at particular flow ranges can be assessed based on information about the gauging station, the flow regime, and the catchment. This type of information is often available for most catchments even if the rating curve data are not. Such 'soft information' on discharge uncertainty may aid interpretation of results from regional and temporal change analyses. In particular, it can help reduce the risk of wrongly interpreting differences in response behaviour caused by discharge uncertainty as real changes. In this presentation I draw on several previous studies to discuss some of the factors that affect discharge data uncertainty and give examples from catchments worldwide. I aim to 1) illustrate the consequences of discharge data uncertainty on comparisons of different types of hydrological response behaviour across catchments and when analysing temporal change, and 2) give practical advice as to what factors may help identify catchments

Development of Physical Activity-Related Parenting Practices Scales for Urban Chinese Parents of Preschoolers: Confirmatory Factor Analysis and Reliability.

PubMed

Suen, Yi-Nam; Cerin, Ester; Barnett, Anthony; Huang, Wendy Y J; Mellecker, Robin R

2017-09-01

Valid instruments of parenting practices related to children's physical activity (PA) are essential to understand how parents affect preschoolers' PA. This study developed and validated a questionnaire of PA-related parenting practices for Chinese-speaking parents of preschoolers in Hong Kong. Parents (n = 394) completed a questionnaire developed using findings from formative qualitative research and literature searches. Test-retest reliability was determined on a subsample (n = 61). Factorial validity was assessed using confirmatory factor analysis. Subscale internal consistency was determined. The scale of parenting practices encouraging PA comprised 2 latent factors: Modeling, structure and participatory engagement in PA (23 items), and Provision of appropriate places for child's PA (4 items). The scale of parenting practices discouraging PA scale encompassed 4 latent factors: Safety concern/overprotection (6 items), Psychological/behavioral control (5 items), Promoting inactivity (4 items), and Promoting screen time (2 items). Test-retest reliabilities were moderate to excellent (0.58 to 0.82), and internal subscale reliabilities were acceptable (0.63 to 0.89). We developed a theory-based questionnaire for assessing PA-related parenting practices among Chinese-speaking parents of Hong Kong preschoolers. While some items were context and culture specific, many were similar to those previously found in other populations, indicating a degree of construct generalizability across cultures.

Spinal appearance questionnaire: factor analysis, scoring, reliability, and validity testing.

PubMed

Carreon, Leah Y; Sanders, James O; Polly, David W; Sucato, Daniel J; Parent, Stefan; Roy-Beaudry, Marjolaine; Hopkins, Jeffrey; McClung, Anna; Bratcher, Kelly R; Diamond, Beverly E

2011-08-15

Cross sectional. This study presents the factor analysis of the Spinal Appearance Questionnaire (SAQ) and its psychometric properties. Although the SAQ has been administered to a large sample of patients with adolescent idiopathic scoliosis (AIS) treated surgically, its psychometric properties have not been fully evaluated. This study presents the factor analysis and scoring of the SAQ and evaluates its psychometric properties. The SAQ and the Scoliosis Research Society-22 (SRS-22) were administered to AIS patients who were being observed, braced or scheduled for surgery. Standard demographic data and radiographic measures including Lenke type and curve magnitude were also collected. Of the 1802 patients, 83% were female; with a mean age of 14.8 years and mean initial Cobb angle of 55.8° (range, 0°-123°). From the 32 items of the SAQ, 15 loaded on two factors with consistent and significant correlations across all Lenke types. There is an Appearance (items 1-10) and an Expectations factor (items 12-15). Responses are summed giving a range of 5 to 50 for the Appearance domain and 5 to 20 for the Expectations domain. The Cronbach's α was 0.88 for both domains and Total score with a test-retest reliability of 0.81 for Appearance and 0.91 for Expectations. Correlations with major curve magnitude were higher for the SAQ Appearance and SAQ Total scores compared to correlations between the SRS Appearance and SRS Total scores. The SAQ and SRS-22 Scores were statistically significantly different in patients who were scheduled for surgery compared to those who were observed or braced. The SAQ is a valid measure of self-image in patients with AIS with greater correlation to curve magnitude than SRS Appearance and Total score. It also discriminates between patients who require surgery from those who do not.

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate.

PubMed

Shimadera, Hikari; Hayami, Hiroshi; Chatani, Satoru; Morino, Yu; Mori, Yasuaki; Morikawa, Tazuko; Yamaji, Kazuyo; Ohara, Toshimasa

2014-04-01

Improvement of air quality models is required so that they can be utilized to design effective control strategies for fine particulate matter (PM2.5). The Community Multiscale Air Quality modeling system was applied to the Greater Tokyo Area of Japan in winter 2010 and summer 2011. The model results were compared with observed concentrations of PM2.5 sulfate (SO4(2-)), nitrate (NO3(-)) and ammonium, and gaseous nitric acid (HNO3) and ammonia (NH3). The model approximately reproduced PM2.5 SO4(2-) concentration, but clearly overestimated PM2.5 NO3(-) concentration, which was attributed to overestimation of production of ammonium nitrate (NH4NO3). This study conducted sensitivity analyses of factors associated with the model performance for PM2.5 NO3(-) concentration, including temperature and relative humidity, emission of nitrogen oxides, seasonal variation of NH3 emission, HNO3 and NH3 dry deposition velocities, and heterogeneous reaction probability of dinitrogen pentoxide. Change in NH3 emission directly affected NH3 concentration, and substantially affected NH4NO3 concentration. Higher dry deposition velocities of HNO3 and NH3 led to substantial reductions of concentrations of the gaseous species and NH4NO3. Because uncertainties in NH3 emission and dry deposition processes are probably large, these processes may be key factors for improvement of the model performance for PM2.5 NO3(-). The Community Multiscale Air Quality modeling system clearly overestimated the concentration of fine particulate nitrate in the Greater Tokyo Area of Japan, which was attributed to overestimation of production of ammonium nitrate. Sensitivity analyses were conducted for factors associated with the model performance for nitrate. Ammonia emission and dry deposition of nitric acid and ammonia may be key factors for improvement of the model performance.

A reliability analysis of the revised competitiveness index.

PubMed

Harris, Paul B; Houston, John M

2010-06-01

This study examined the reliability of the Revised Competitiveness Index by investigating the test-retest reliability, interitem reliability, and factor structure of the measure based on a sample of 280 undergraduates (200 women, 80 men) ranging in age from 18 to 28 years (M = 20.1, SD = 2.1). The findings indicate that the Revised Competitiveness Index has high test-retest reliability, high inter-item reliability, and a stable factor structure. The results support the assertion that the Revised Competitiveness Index assesses competitiveness as a stable trait rather than a dynamic state.

Factor Structure, Reliability and Validity of the Taiwanese Version of the Multidimensional Anxiety Scale for Children

ERIC Educational Resources Information Center

Yen, Cheng-Fang; Yang, Pinchen; Wu, Yu-Yu; Hsu, Fan-Ching; Cheng, Chung-Ping

2010-01-01

The aims of this study were to examine the factor structure, internal consistency 1 month test-retest reliability and the discriminant validity for the diagnosis of anxiety disorder of the Taiwanese version of the Multidimensional Anxiety Scale for Children (MASC-T). A total of 12,536 Taiwanese children and adolescents in the community were…

[Reliability and Validity of the Behavioral Check List for Preschool Children to Measure Attention Deficit Hyperactivity Behaviors].

PubMed

Tsuno, Kanami; Yoshimasu, Kouichi; Hayashi, Takashi; Tatsuta, Nozomi; Ito, Yuki; Kamijima, Michihiro; Nakai, Kunihiko

2018-01-01

Nowadays, attention deficit hyperactivity (ADH) problems are observed commonly among school-age children. However, questionnaires specific to ADH behaviors among preschool children are very few. The aim of this study was to investigate the reliability and validity of the 25-item Behavioral Check List (BCL), which was developed from interviews of parents with children who were diagnosed as having Attention-deficit/hyperactivity disorder (ADHD) and measures ADH behaviors in preschool age. We recruited 22 teachers from 10 nurseries/kindergartens in Miyagi Prefecture, Japan. A total of 138 preschool children were assessed using the BCL. To investigate inter-rater reliability, two teachers from each facility assess seven to twenty children in their class, and intraclass correlation coefficients (ICCs) were calculated. The teachers additionally answered questions in the 1/5-5 Caregiver-Teacher Report Form (C-TRF) to investigate the criterion validity of the BCL. To investigate structural validity, exploratory factor analysis with promax rotation and confirmatory factor analysis were performed. The internal consistency reliability of the BCL was good (α = 0.92) and correlation analyses also confirmed its excellent criterion validity. Although exploratory factor analysis for the BCL yielded a five-factor model that consisted of a factor structure different from that of the original one, the results were similar to the original six factors. The ICCs of the BCL were 0.38-0.99 and it was not high enough for inter-rater reliability in some facilities. However, there is a possibility to improve it by giving raters adequate explanations when using BCL. The present study showed acceptable levels of reliability and validity of the BCL among Japanese preschool children.

Item Response Theory Modeling and Categorical Regression Analyses of the Five-Factor Model Rating Form: A Study on Italian Community-Dwelling Adolescent Participants and Adult Participants.

PubMed

Fossati, Andrea; Widiger, Thomas A; Borroni, Serena; Maffei, Cesare; Somma, Antonella

2017-06-01

To extend the evidence on the reliability and construct validity of the Five-Factor Model Rating Form (FFMRF) in its self-report version, two independent samples of Italian participants, which were composed of 510 adolescent high school students and 457 community-dwelling adults, respectively, were administered the FFMRF in its Italian translation. Adolescent participants were also administered the Italian translation of the Borderline Personality Features Scale for Children-11 (BPFSC-11), whereas adult participants were administered the Italian translation of the Triarchic Psychopathy Measure (TriPM). Cronbach α values were consistent with previous findings; in both samples, average interitem r values indicated acceptable internal consistency for all FFMRF scales. A multidimensional graded item response theory model indicated that the majority of FFMRF items had adequate discrimination parameters; information indices supported the reliability of the FFMRF scales. Both categorical (i.e., item-level) and scale-level regression analyses suggested that the FFMRF scores may predict a nonnegligible amount of variance in the BPFSC-11 total score in adolescent participants, and in the TriPM scale scores in adult participants.

Accuracy and reliability of self-reported weight and height in the Sister Study

PubMed Central

Lin, Cynthia J; DeRoo, Lisa A; Jacobs, Sara R; Sandler, Dale P

2012-01-01

Objective To assess accuracy and reliability of self-reported weight and height and identify factors associated with reporting accuracy. Design Analysis of self-reported and measured weight and height from participants in the Sister Study (2003–2009), a nationwide cohort of 50,884 women aged 35–74 in the United States with a sister with breast cancer. Setting Weight and height were reported via computer-assisted telephone interview (CATI) and self-administered questionnaires, and measured by examiners. Subjects Early enrollees in the Sister Study. There were 18,639 women available for the accuracy analyses and 13,316 for the reliability analyses. Results Using weighted kappa statistics, comparisons were made between CATI responses and examiner measures to assess accuracy and CATI and questionnaire responses to assess reliability. Polytomous logistic regression evaluated factors associated with over- or under-reporting. Compared to measured values, agreement was 96% for reported height (±1 inch; weighted kappa 0.84) and 67% for weight (±3 pounds; weighted kappa 0.92). Obese women [body mass index (BMI) ≥30 kg/m2)] were more likely than normal weight women to under-report weight by ≥5% and underweight women (BMI <18.5 kg/m2) were more likely to over-report. Among normal and overweight women (18.5 kgm2≤ BMI <30 kgm2), weight cycling and lifetime weight difference ≥50 pounds were associated with over-reporting. Conclusions U.S. women in the Sister Study were reasonably reliable and accurate in reporting weight and height. Women with normal-range BMI reported most accurately. Overweight and obese women and those with weight fluctuations were less accurate, but even among obese women, few under-reported their weight by >10%. PMID:22152926

Using wind plant data to increase reliability.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, Valerie A.; Ogilvie, Alistair B.; McKenney, Bridget L.

2011-01-01

Operators interested in improving reliability should begin with a focus on the performance of the wind plant as a whole. To then understand the factors which drive individual turbine performance, which together comprise the plant performance, it is necessary to track a number of key indicators. Analysis of these key indicators can reveal the type, frequency, and cause of failures and will also identify their contributions to overall plant performance. The ideal approach to using data to drive good decisions includes first determining which critical decisions can be based on data. When those required decisions are understood, then the analysismore » required to inform those decisions can be identified, and finally the data to be collected in support of those analyses can be determined. Once equipped with high-quality data and analysis capabilities, the key steps to data-based decision making for reliability improvements are to isolate possible improvements, select the improvements with largest return on investment (ROI), implement the selected improvements, and finally to track their impact.« less

Reliability and coverage analysis of non-repairable fault-tolerant memory systems

NASA Technical Reports Server (NTRS)

Cox, G. W.; Carroll, B. D.

1976-01-01

A method was developed for the construction of probabilistic state-space models for nonrepairable systems. Models were developed for several systems which achieved reliability improvement by means of error-coding, modularized sparing, massive replication and other fault-tolerant techniques. From the models developed, sets of reliability and coverage equations for the systems were developed. Comparative analyses of the systems were performed using these equation sets. In addition, the effects of varying subunit reliabilities on system reliability and coverage were described. The results of these analyses indicated that a significant gain in system reliability may be achieved by use of combinations of modularized sparing, error coding, and software error control. For sufficiently reliable system subunits, this gain may far exceed the reliability gain achieved by use of massive replication techniques, yet result in a considerable saving in system cost.

Covariate-free and Covariate-dependent Reliability.

PubMed

Bentler, Peter M

2016-12-01

Classical test theory reliability coefficients are said to be population specific. Reliability generalization, a meta-analysis method, is the main procedure for evaluating the stability of reliability coefficients across populations. A new approach is developed to evaluate the degree of invariance of reliability coefficients to population characteristics. Factor or common variance of a reliability measure is partitioned into parts that are, and are not, influenced by control variables, resulting in a partition of reliability into a covariate-dependent and a covariate-free part. The approach can be implemented in a single sample and can be applied to a variety of reliability coefficients.

Reliability, factor structure, and validity of the German version of the Trauma Symptom Checklist for Children in a sample of adolescents

PubMed Central

Matulis, Simone; Loos, Laura; Langguth, Nadine; Schreiber, Franziska; Gutermann, Jana; Gawrilow, Caterina; Steil, Regina

2015-01-01

Background The Trauma Symptom Checklist for Children (TSC-C) is the most widely used self-report scale to assess trauma-related symptoms in children and adolescents on six clinical scales. The purpose of the present study was to develop a German version of the TSC-C and to investigate its psychometric properties, such as factor structure, reliability, and validity, in a sample of German adolescents. Method A normative sample of N=583 and a clinical sample of N=41 adolescents with a history of physical or sexual abuse aged between 13 and 21 years participated in the study. Results The Confirmatory Factor Analysis on the six-factor model (anger, anxiety, depression, dissociation, posttraumatic stress, and sexual concerns with the subdimensions preoccupation and distress) revealed acceptable to good fit statistics in the normative sample. One item had to be excluded from the German version of the TSC-C because the factor loading was too low. All clinical scales presented acceptable to good reliability, with Cronbach's α's ranging from .80 to .86 in the normative sample and from .72 to .87 in the clinical sample. Concurrent validity was also demonstrated by the high correlations between the TSC-C scales and instruments measuring similar psychopathology. TSC-C scores reliably differentiated between adolescents with trauma history and those without trauma history, indicating discriminative validity. Conclusions In conclusion, the German version of the TSC-C is a reliable and valid instrument for assessing trauma-related symptoms on six different scales in adolescents aged between 13 and 21 years. PMID:26498182

Reliability, factor structure, and validity of the German version of the Trauma Symptom Checklist for Children in a sample of adolescents.

PubMed

Matulis, Simone; Loos, Laura; Langguth, Nadine; Schreiber, Franziska; Gutermann, Jana; Gawrilow, Caterina; Steil, Regina

2015-01-01

The Trauma Symptom Checklist for Children (TSC-C) is the most widely used self-report scale to assess trauma-related symptoms in children and adolescents on six clinical scales. The purpose of the present study was to develop a German version of the TSC-C and to investigate its psychometric properties, such as factor structure, reliability, and validity, in a sample of German adolescents. A normative sample of N=583 and a clinical sample of N=41 adolescents with a history of physical or sexual abuse aged between 13 and 21 years participated in the study. The Confirmatory Factor Analysis on the six-factor model (anger, anxiety, depression, dissociation, posttraumatic stress, and sexual concerns with the subdimensions preoccupation and distress) revealed acceptable to good fit statistics in the normative sample. One item had to be excluded from the German version of the TSC-C because the factor loading was too low. All clinical scales presented acceptable to good reliability, with Cronbach's α's ranging from .80 to .86 in the normative sample and from .72 to .87 in the clinical sample. Concurrent validity was also demonstrated by the high correlations between the TSC-C scales and instruments measuring similar psychopathology. TSC-C scores reliably differentiated between adolescents with trauma history and those without trauma history, indicating discriminative validity. In conclusion, the German version of the TSC-C is a reliable and valid instrument for assessing trauma-related symptoms on six different scales in adolescents aged between 13 and 21 years.

Reliability Problems of the Datum: Solutions for Questionnaire Responses.

ERIC Educational Resources Information Center

Bastick, Tony

Questionnaires often ask for estimates, and these estimates are given with different reliabilities. It is difficult to know the different reliabilities of single estimates and to take these into account in subsequent analyses. This paper contains a practical example to show that not taking the reliability of different responses into account can…

Chapter 15: Reliability of Wind Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen; O'Connor, Ryan

The global wind industry has witnessed exciting developments in recent years. The future will be even brighter with further reductions in capital and operation and maintenance costs, which can be accomplished with improved turbine reliability, especially when turbines are installed offshore. One opportunity for the industry to improve wind turbine reliability is through the exploration of reliability engineering life data analysis based on readily available data or maintenance records collected at typical wind plants. If adopted and conducted appropriately, these analyses can quickly save operation and maintenance costs in a potentially impactful manner. This chapter discusses wind turbine reliability bymore » highlighting the methodology of reliability engineering life data analysis. It first briefly discusses fundamentals for wind turbine reliability and the current industry status. Then, the reliability engineering method for life analysis, including data collection, model development, and forecasting, is presented in detail and illustrated through two case studies. The chapter concludes with some remarks on potential opportunities to improve wind turbine reliability. An owner and operator's perspective is taken and mechanical components are used to exemplify the potential benefits of reliability engineering analysis to improve wind turbine reliability and availability.« less

Limit states and reliability-based pipeline design. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zimmerman, T.J.E.; Chen, Q.; Pandey, M.D.

1997-06-01

This report provides the results of a study to develop limit states design (LSD) procedures for pipelines. Limit states design, also known as load and resistance factor design (LRFD), provides a unified approach to dealing with all relevant failure modes combinations of concern. It explicitly accounts for the uncertainties that naturally occur in the determination of the loads which act on a pipeline and in the resistance of the pipe to failure. The load and resistance factors used are based on reliability considerations; however, the designer is not faced with carrying out probabilistic calculations. This work is done during developmentmore » and periodic updating of the LSD document. This report provides background information concerning limits states and reliability-based design (Section 2), gives the limit states design procedures that were developed (Section 3) and provides results of the reliability analyses that were undertaken in order to partially calibrate the LSD method (Section 4). An appendix contains LSD design examples in order to demonstrate use of the method. Section 3, Limit States Design has been written in the format of a recommended practice. It has been structured so that, in future, it can easily be converted to a limit states design code format. Throughout the report, figures and tables are given at the end of each section, with the exception of Section 3, where to facilitate understanding of the LSD method, they have been included with the text.« less

An Illumination Modeling System for Human Factors Analyses

NASA Technical Reports Server (NTRS)

Huynh, Thong; Maida, James C.; Bond, Robert L. (Technical Monitor)

2002-01-01

Seeing is critical to human performance. Lighting is critical for seeing. Therefore, lighting is critical to human performance. This is common sense, and here on earth, it is easily taken for granted. However, on orbit, because the sun will rise or set every 45 minutes on average, humans working in space must cope with extremely dynamic lighting conditions. Contrast conditions of harsh shadowing and glare is also severe. The prediction of lighting conditions for critical operations is essential. Crew training can factor lighting into the lesson plans when necessary. Mission planners can determine whether low-light video cameras are required or whether additional luminaires need to be flown. The optimization of the quantity and quality of light is needed because of the effects on crew safety, on electrical power and on equipment maintainability. To address all of these issues, an illumination modeling system has been developed by the Graphics Research and Analyses Facility (GRAF) and Lighting Environment Test Facility (LETF) in the Space Human Factors Laboratory at NASA Johnson Space Center. The system uses physically based ray tracing software (Radiance) developed at Lawrence Berkeley Laboratories, a human factors oriented geometric modeling system (PLAID) and an extensive database of humans and environments. Material reflectivity properties of major surfaces and critical surfaces are measured using a gonio-reflectometer. Luminaires (lights) are measured for beam spread distribution, color and intensity. Video camera performances are measured for color and light sensitivity. 3D geometric models of humans and the environment are combined with the material and light models to form a system capable of predicting lighting conditions and visibility conditions in space.

Columbus safety and reliability

NASA Astrophysics Data System (ADS)

Longhurst, F.; Wessels, H.

1988-10-01

Analyses carried out to ensure Columbus reliability, availability, and maintainability, and operational and design safety are summarized. Failure modes/effects/criticality is the main qualitative tool used. The main aspects studied are fault tolerance, hazard consequence control, risk minimization, human error effects, restorability, and safe-life design.

Multilevel Confirmatory Factor Analysis of the Teacher My Class Inventory-Short Form

ERIC Educational Resources Information Center

Villares, Elizabeth; Mariani, Melissa; Sink, Christopher A.; Colvin, Kimberly

2016-01-01

Researchers analyzed data from elementary teachers (N = 233) to further establish the psychometric soundness of the Teacher My Class Inventory-Short Form. Supporting previous psychometric research, confirmatory factor analyses findings supported the factorial validity of the hypothesized five-factor solution. Internal reliability estimates were…

Analyses of associations between reactive oxygen metabolites and antioxidant capacity and related factors among healthy adolescents.

PubMed

Tamae, Kazuyoshi; Eto, Toshiharu; Aoki, Kazuhiro; Nakamaru, Shingo; Koshikawa, Kazunori; Sakuma, Kazuhiko; Hirano, Takeshi

2013-12-01

Evidence based on epidemiologic investigations using biochemical parameter is meaningful for health promotion and administration among adolescents. We conducted Reactive Oxygen Metabolites (ROM) and Biological Antioxidant Potentials (BAP) tests, along with a questionnaire survey, for a sample of 74 high school students (16.51±0.11 years of aged mean±SE), to investigate the associations between ROM, BAP, and related factors, including BMI and blood biochemical data. Venous blood samples (approximately 7cc) were collected. At the same time, each individual's information was obtained from the questionnaire. The mental health status was investigated using the Center for Epidemiologic Study Depression scale (CES-D) included in the same questionnaire. The mean values and standard errors of all variables were calculated. In addition, the relationships between ROM and BAP with these factors were analyzed. The results revealed the preferred levels of ROM (261.95 ± 9.52 U.CARR) and, BAP (2429.89±53.39 µmol/L) and blood biochemical data. Few significant relationships between two markers and related factors were found. So, we detected a cluster with an imbalance between ROM and BAP, which means low antioxidant ability, whereas the other clusters had conditions with moderate balance or good balance between them. Moreover, we determined the Oxidative stress-Antioxidant capacity ratio (OAR), using the ROM and BAP values, in order to clarify the characteristic of the detected clusters.However, comparative analyses across the three clusters did not yield significant differences in all related factors. No correlations between ROM, BAP and related factors were indicated, although significant association between ROM and BAP was observed (R2=0.1156, R=0.340, P=0.013). The reason for these results can be explained by the influences of good health and young age. On the other hand, present study suggests that some latent problems among adolescents may be related to unhealthy

Designing magnetic systems for reliability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heitzenroeder, P.J.

1991-01-01

Designing magnetic system is an iterative process in which the requirements are set, a design is developed, materials and manufacturing processes are defined, interrelationships with the various elements of the system are established, engineering analyses are performed, and fault modes and effects are studied. Reliability requires that all elements of the design process, from the seemingly most straightforward such as utilities connection design and implementation, to the most sophisticated such as advanced finite element analyses, receives a balanced and appropriate level of attention. D.B. Montgomery's study of magnet failures has shown that the predominance of magnet failures tend not tomore » be in the most intensively engineered areas, but are associated with insulation, leads, ad unanticipated conditions. TFTR, JET, JT-60, and PBX are all major tokamaks which have suffered loss of reliability due to water leaks. Similarly the majority of causes of loss of magnet reliability at PPPL has not been in the sophisticated areas of the design but are due to difficulties associated with coolant connections, bus connections, and external structural connections. Looking towards the future, the major next-devices such as BPX and ITER are most costly and complex than any of their predecessors and are pressing the bounds of operating levels, materials, and fabrication. Emphasis on reliability is a must as the fusion program enters a phase where there are fewer, but very costly devices with the goal of reaching a reactor prototype stage in the next two or three decades. This paper reviews some of the magnet reliability issues which PPPL has faced over the years the lessons learned from them, and magnet design and fabrication practices which have been found to contribute to magnet reliability.« less

Assessing the reliability and validity of anti-tobacco attitudes/beliefs in the context of a campaign strategy.

PubMed

Arheart, Kristopher L; Sly, David F; Trapido, Edward J; Rodriguez, Richard D; Ellestad, Amy J

2004-11-01

To identify multi-item attitude/belief scales associated with the theoretical foundations of an anti-tobacco counter-marketing campaign and assess their reliability and validity. The data analyzed are from two state-wide, random, cross-sectional telephone surveys [n(S1)=1,079, n(S2)=1,150]. Items forming attitude/belief scales are identified using factor analysis. Reliability is assessed with Chronbach's alpha. Relationships among scales are explored using Pearson correlation. Validity is assessed by testing associations derived from the Centers for Disease Control and Prevention's (CDC) logic model for tobacco control program development and evaluation linking media exposure to attitudes/beliefs, and attitudes/beliefs to smoking-related behaviors. Adjusted odds ratios are employed for these analyses. Three factors emerged: traditional attitudes/beliefs about tobacco and tobacco use, tobacco industry manipulation and anti-tobacco empowerment. Reliability coefficients are in the range of 0.70 and vary little between age groups. The factors are correlated with one-another as hypothesized. Associations between media exposure and the attitude/belief scales and between these scales and behaviors are consistent with the CDC logic model. Using reliable, valid multi-item scales is theoretically and methodologically more sound than employing single-item measures of attitudes/beliefs. Methodological, theoretical and practical implications are discussed.

Reliability considerations for the total strain range version of strainrange partitioning

NASA Technical Reports Server (NTRS)

Wirsching, P. H.; Wu, Y. T.

1984-01-01

A proposed total strainrange version of strainrange partitioning (SRP) to enhance the manner in which SRP is applied to life prediction is considered with emphasis on how advanced reliability technology can be applied to perform risk analysis and to derive safety check expressions. Uncertainties existing in the design factors associated with life prediction of a component which experiences the combined effects of creep and fatigue can be identified. Examples illustrate how reliability analyses of such a component can be performed when all design factors in the SRP model are random variables reflecting these uncertainties. The Rackwitz-Fiessler and Wu algorithms are used and estimates of the safety index and the probablity of failure are demonstrated for a SRP problem. Methods of analysis of creep-fatigue data with emphasis on procedures for producing synoptic statistics are presented. An attempt to demonstrate the importance of the contribution of the uncertainties associated with small sample sizes (fatique data) to risk estimates is discussed. The procedure for deriving a safety check expression for possible use in a design criteria document is presented.

Factor structure and psychometric properties of the trier inventory for chronic stress (TICS) in a representative german sample

PubMed Central

2012-01-01

Background Chronic stress results from an imbalance of personal traits, resources and the demands placed upon an individual by social and occupational situations. This chronic stress can be measured using the Trier Inventory for Chronic Stress (TICS). Aims of the present study are to test the factorial structure of the TICS, report its psychometric properties, and evaluate the influence of gender and age on chronic stress. Methods The TICS was answered by N = 2,339 healthy participants aged 14 to 99. The sample was selected by random-route sampling. Exploratory factor analyses with Oblimin-rotated Principal Axis extraction were calculated. Confirmatory factor analyses applying Robust Maximum Likelihood estimations (MLM) tested model fit and configural invariance as well as the measurement invariance for gender and age. Reliability estimations and effect sizes are reported. Results In the exploratory factor analyses, both a two-factor and a nine-factor model emerged. Confirmatory factor analyses resulted in acceptable model fit (RMSEA), with model comparison fit statistics corroborating the superiority of the nine-factor model. Most factors were moderately to highly intercorrelated. Reliabilities were good to very good. Measurement invariance tests gave evidence for differential effects of gender and age on the factor structure. Furthermore, women and younger individuals, especially those aged 35 to 44, tended to report more chronic stress than men and older individuals. Conclusions The proposed nine-factor structure could be factorially validated, results in good scale reliability, and heuristically can be grouped by two higher-order factors: "High Demands" and "Lack of Satisfaction". Age and gender represent differentiable and meaningful contributors to the perception of chronic stress. PMID:22463771

Reliability analysis of interdependent lattices

NASA Astrophysics Data System (ADS)

Limiao, Zhang; Daqing, Li; Pengju, Qin; Bowen, Fu; Yinan, Jiang; Zio, Enrico; Rui, Kang

2016-06-01

Network reliability analysis has drawn much attention recently due to the risks of catastrophic damage in networked infrastructures. These infrastructures are dependent on each other as a result of various interactions. However, most of the reliability analyses of these interdependent networks do not consider spatial constraints, which are found important for robustness of infrastructures including power grid and transport systems. Here we study the reliability properties of interdependent lattices with different ranges of spatial constraints. Our study shows that interdependent lattices with strong spatial constraints are more resilient than interdependent Erdös-Rényi networks. There exists an intermediate range of spatial constraints, at which the interdependent lattices have minimal resilience.

A reduced factor structure for the PROQOL-HIV questionnaire provided reliable indicators of health-related quality of life.

PubMed

Lalanne, Christophe; Chassany, Olivier; Carrieri, Patrizia; Marcellin, Fabienne; Armstrong, Andrew R; Lert, France; Spire, Bruno; Dray-Spira, Rosemary; Duracinsky, Martin

2016-04-01

To identify a simplified factor structure for the PROQOL-human immunodeficiency virus (HIV) questionnaire to improve the measurement of the health-related quality of life (HRQL) of HIV-positive patients in clinical care and research settings. HRQL data were collected using the eight-dimension PROQOL-HIV questionnaire from 2,537 patients (VESPA2 study). Exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) validated a simpler four-factor structure and assessed measurement invariance (MI). Multigroup analysis assessed the effect of sex, age, and antiretroviral therapy (ART) on the resulting factor scores. Correlations with symptom and Short Form (SF)-12 self-reports assessed convergent validity. Item analysis, EFA, and CFAs confirmed the validity [comparative fit index (CFI), 0.948; root mean square error of approximation, 0.064] and reliability (α's ≥ 0.8) of four dimensions: physical health and symptoms, health concerns and mental distress, social and intimate relationships, and treatment-related impact. Strong MI was demonstrated across sex and age (decrease in CFI <0.01). A multiple-cause multiple-indicator model indicated that HRQL correlated as expected with sex, age, and the ART status. Correlations of HRQL, symptom reports, and SF-12 scores evidenced convergent validity criterion. The simplified factor structure and scoring scheme for PROQOL-HIV will allow clinicians to monitor with greater reliability the HRQL of patients in clinical care and research settings. Copyright © 2016 Elsevier Inc. All rights reserved.

Higher and Lower Order Factor Analyses of the Temperament in Middle Childhood Questionnaire.

PubMed

Kotelnikova, Yuliya; Olino, Thomas M; Klein, Daniel N; Mackrell, Sarah V M; Hayden, Elizabeth P

2017-12-01

The Temperament in Middle Childhood Questionnaire (TMCQ) is a widely used parent-report measure of temperament. However, neither its lower nor higher order structures has been tested via a bottom-up, empirically based approach. We conducted higher and lower order exploratory factor analyses (EFAs) of the TMCQ in a large ( N = 654) sample of 9-year-olds. Item-level EFAs identified 92 items as suitable (i.e., with loadings ≥.40) for constructing lower order factors, only half of which resembled a TMCQ scale posited by the measure's authors. Higher order EFAs of the lower order factors showed that a three-factor structure (Impulsivity/Negative Affectivity, Negative Affectivity, and Openness/Assertiveness) was the only admissible solution. Overall, many TMCQ items did not load well onto a lower order factor. In addition, only three factors, which did not show a clear resemblance to Rothbart's four-factor model of temperament in middle childhood, were needed to account for the higher order structure of the TMCQ.

Space reliability technology - A historical perspective

NASA Technical Reports Server (NTRS)

Cohen, H.

1984-01-01

The progressive improvements in reliability of launch vehicles is traced from the Vanguard rocket to the STS. The Vanguard, built with minimal redundancy and a high mass ratio, was used as an operational vehicle midway through its test program in an attempt to meet the perceived challenge represented by the Sputnik. The fourth Vanguard failed due to inadequate contamination prevention and lack of inspection ports. Automatic firing sequences were adopted for the Titan rockets, which were an order of magnitude larger than the Vanguard and therefore had room for interior inspections. Qualification testing and reporting were introduced for components, along with X ray inspection of fuel tank welds. Dual systems were added for flight critical components when the Titan became man-rated for the Gemini program. Designs incorporated full failure mode effects and criticality analyses for the Apollo program, which exposed the limits of applicability of numerical reliability models. Fault tree analyses and program milestone reviews were initiated. The worth of man-in-the-loop in space activities for reliability was demonstrated with the rescue of Skylab after solar panel and meteoroid shield failures. It is now the reliability of the payload, rather than the vehicle, that is questioned for Shuttle launches.

Electron/proton spectrometer certification documentation analyses

NASA Technical Reports Server (NTRS)

Gleeson, P.

1972-01-01

A compilation of analyses generated during the development of the electron-proton spectrometer for the Skylab program is presented. The data documents the analyses required by the electron-proton spectrometer verification plan. The verification plan was generated to satisfy the ancillary hardware requirements of the Apollo Applications program. The certification of the spectrometer requires that various tests, inspections, and analyses be documented, approved, and accepted by reliability and quality control personnel of the spectrometer development program.

Inter-rater reliability of PATH observations for assessment of ergonomic risk factors in hospital work.

PubMed

Park, Jung-Keun; Boyer, Jon; Tessler, Jamie; Casey, Jeffrey; Schemm, Linda; Gore, Rebecca; Punnett, Laura

2009-07-01

This study examined the inter-rater reliability of expert observations of ergonomic risk factors by four analysts. Ten jobs were observed at a hospital using a newly expanded version of the PATH method (Buchholz et al. 1996), to which selected upper extremity exposures had been added. Two of the four raters simultaneously observed each worker onsite for a total of 443 observation pairs containing 18 categorical exposure items each. For most exposure items, kappa coefficients were 0.4 or higher. For some items, agreement was higher both for the jobs with less rapid hand activity and for the analysts with a higher level of ergonomic job analysis experience. These upper extremity exposures could be characterised reliably with real-time observation, given adequate experience and training of the observers. The revised version of PATH is applicable to the analysis of jobs where upper extremity musculoskeletal strain is of concern.

[Validation and reliability study of the parent concerns about surgery questionnaire: What worries parents?

PubMed

Gironés Muriel, Alberto; Campos Segovia, Ana; Ríos Gómez, Patricia

2018-01-01

The study of mediating variables and psychological responses to child surgery involves the evaluation of both the patient and the parents as regards different stressors. To have a reliable and reproducible valid evaluation tool that assesses the level of paternal involvement in relation to different stressors in the setting of surgery. A self-report questionnaire study was completed by 123 subjects of both sexes, subdivided into 2populations, due to their relationship with the hospital setting. The items were determined by a group of experts and analysed using the Lawshe validity index to determine a first validity of content. Subsequently, the reliability of the tool was determined by an item-re-item analysis of the 2sub-populations. A factorial analysis was performed to analyse the construct validity with the maximum likelihood and rotation of varimax type factors. A questionnaire of paternal concern was offered, consisting of 21 items with a Cronbach coefficient of 0.97, giving good precision and stability. The posterior factor analysis gives an adequate validity to the questionnaire, with the determination of 10 common stressors that cover 74.08% of the common and non-common variance of the questionnaire. The proposed questionnaire is reliable, valid and easy-to-apply and is developed to assess the level of paternal concern about the surgery of a child and to be able to apply measures and programs through the prior assessment of these elements. Copyright © 2016 Asociación Española de Pediatría. Publicado por Elsevier España, S.L.U. All rights reserved.

Test-retest reliability and factor structures of organizational citizenship behavior for Hong Kong workers.

PubMed

Lam, S S

2001-02-01

In 1990 Podsakoff, MacKenzie, Moorman, and Fetter developed a scale to measure the five dimensions of organizational citizenship behavior. Test-retest data over 15 weeks are reported for this scale for a sample of 82 female and 32 male Chinese tellers (ages 18 to 54 years) from a large international bank in Hong Kong. Stability was .83, and there was no significant change between Times 1 and 2. Analysis indicated the five-factor structure and showed it to be a reliable measure when used with a nonwestern sample.

Relative and absolute reliability of measures of linoleic acid-derived oxylipins in human plasma.

PubMed

Gouveia-Figueira, Sandra; Bosson, Jenny A; Unosson, Jon; Behndig, Annelie F; Nording, Malin L; Fowler, Christopher J

2015-09-01

Modern analytical techniques allow for the measurement of oxylipins derived from linoleic acid in biological samples. Most validatory work has concerned extraction techniques, repeated analysis of aliquots from the same biological sample, and the influence of external factors such as diet and heparin treatment upon their levels, whereas less is known about the relative and absolute reliability of measurements undertaken on different days. A cohort of nineteen healthy males were used, where samples were taken at the same time of day on two occasions, at least 7 days apart. Relative reliability was assessed using Lin's concordance correlation coefficients (CCC) and intraclass correlation coefficients (ICC). Absolute reliability was assessed by Bland-Altman analyses. Nine linoleic acid oxylipins were investigated. ICC and CCC values ranged from acceptable (0.56 [13-HODE]) to poor (near zero [9(10)- and 12(13)-EpOME]). Bland-Altman limits of agreement were in general quite wide, ranging from ±0.5 (12,13-DiHOME) to ±2 (9(10)-EpOME; log10 scale). It is concluded that relative reliability of linoleic acid-derived oxylipins varies between lipids with compounds such as the HODEs showing better relative reliability than compounds such as the EpOMEs. These differences should be kept in mind when designing and interpreting experiments correlating plasma levels of these lipids with factors such as age, body mass index, rating scales etc. Copyright © 2015 Elsevier Inc. All rights reserved.

Reliability of a standardized test in Swedish for evaluation of reading performance in healthy eyes. Interchart and test-retest analyses.

PubMed

Thaung, Jörgen; Olseke, Kjell; Ahl, Johan; Sjöstrand, Johan

2014-09-01

The purpose of our study was to establish a practical and quick test for assessing reading performance and to statistically analyse interchart and test-retest reliability of a new standardized Swedish reading chart system consisting of three charts constructed according to the principles available in the literature. Twenty-four subjects with healthy eyes, mean age 65 ± 10 years, were tested binocularly and the reading performance evaluated as reading acuity, critical print size and maximum reading speed. The test charts all consist of 12 short text sentences with a print size ranging from 0.9 to -0.2 logMAR in approximate steps of 0.1 logMAR. Two testing sessions, in two different groups (C1 and C2), were under strict control of luminance and lighting environment. Reading performance tests with chart T1, T2 and T3 were used for evaluation of interchart reliability and test data from a second session 1 month or more apart for the test-retest analysis. The testing of reading performance in adult observers with short sentences of continuous text was quick and practical. The agreement between the tests obtained with the three different test charts was high both within the same test session and at retest. This new Swedish variant of a standardized reading system based on short sentences and logarithmic progression of print size provides reliable measurements of reading performance and preliminary norms in an age group around 65 years. The reading test with three independent reading charts can be useful for clinical studies of reading ability before and after treatment. © 2013 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

The Brighton musculoskeletal Patient-Reported Outcome Measure (BmPROM): An assessment of validity, reliability, and responsiveness.

PubMed

Bryant, Elizabeth; Murtagh, Shemane; Finucane, Laura; McCrum, Carol; Mercer, Christopher; Smith, Toby; Canby, Guy; Rowe, David A; Moore, Ann P

2018-05-11

In response for the need of a freely available, stand-alone, validated outcome measure for use within musculoskeletal (MSK) physiotherapy practice, sensitive enough to measure clinical effectiveness, we developed an MSK patient reported outcome measure. This study examined the validity and reliability of the newly developed Brighton musculoskeletal Patient-Reported Outcome Measure (BmPROM) within physiotherapy outpatient settings. Two hundred twenty-four patients attending physiotherapy outpatient departments in South East England with an MSK condition participated in this study. The BmPROM was assessed for user friendliness (rated feedback, N = 224), reliability (internal consistency and test-retest reliability, n = 42), validity (internal and external construct validity, N = 224), and responsiveness (internal, n = 25). Exploratory factor analysis indicated that a two-factor model provides a good fit to the data. Factors were representative of "Functionality" and "Wellbeing". Correlations observed between the BmPROM and SF-36 domains provided evidence of convergent validity. Reliability results indicated that both subscales were internally consistent with alphas above the acceptable limits for both "Functionality" (α = .85, 95% CI [.81, .88]) and 'Wellbeing' (α = .80, 95% CI [.75, .84]). Test-retest analyses (n = 42) demonstrated a high degree of reliability between "Functionality" (ICC = .84; 95% CI [.72, .91]) and "Wellbeing" scores (ICC = .84; 95% CI [.72, .91]). Further examination of test-retest reliability through the Bland-Altman analysis demonstrated that the difference between "Functionality" and "Wellbeing" test scores did not vary as a function of absolute test score. Large treatment effect sizes were found for both subscales (Functionality d = 1.10; Wellbeing 1.03). The BmPROM is a reliable and valid outcome measure for use in evaluating physiotherapy treatment of MSK conditions. Copyright © 2018 John Wiley & Sons, Ltd.

TEMPLE: analysing population genetic variation at transcription factor binding sites.

PubMed

Litovchenko, Maria; Laurent, Stefan

2016-11-01

Genetic variation occurring at the level of regulatory sequences can affect phenotypes and fitness in natural populations. This variation can be analysed in a population genetic framework to study how genetic drift and selection affect the evolution of these functional elements. However, doing this requires a good understanding of the location and nature of regulatory regions and has long been a major hurdle. The current proliferation of genomewide profiling experiments of transcription factor occupancies greatly improves our ability to identify genomic regions involved in specific DNA-protein interactions. Although software exists for predicting transcription factor binding sites (TFBS), and the effects of genetic variants on TFBS specificity, there are no tools currently available for inferring this information jointly with the genetic variation at TFBS in natural populations. We developed the software Transcription Elements Mapping at the Population LEvel (TEMPLE), which predicts TFBS, evaluates the effects of genetic variants on TFBS specificity and summarizes the genetic variation occurring at TFBS in intraspecific sequence alignments. We demonstrate that TEMPLE's TFBS prediction algorithms gives identical results to PATSER, a software distribution commonly used in the field. We also illustrate the unique features of TEMPLE by analysing TFBS diversity for the TF Senseless (SENS) in one ancestral and one cosmopolitan population of the fruit fly Drosophila melanogaster. TEMPLE can be used to localize TFBS that are characterized by strong genetic differentiation across natural populations. This will be particularly useful for studies aiming to identify adaptive mutations. TEMPLE is a java-based cross-platform software that easily maps the genetic diversity at predicted TFBSs using a graphical interface, or from the Unix command line. © 2016 John Wiley & Sons Ltd.

Multilevel Factor Structure, Concurrent Validity, and Test-Retest Reliability of the High School Teacher Version of the Authoritative School Climate Survey

ERIC Educational Resources Information Center

Huang, Francis L.; Cornell, Dewey G.

2016-01-01

Although school climate has long been recognized as an important factor in the school improvement process, there are few psychometrically supported measures based on teacher perspectives. The current study replicated and extended the factor structure, concurrent validity, and test-retest reliability of the teacher version of the Authoritative…

Preliminary validation and reliability of the Short Form Chronic Respiratory Disease Questionnaire in a lung cancer population.

PubMed

Charalambous, A; Molassiotis, A

2017-01-01

The Short Form Chronic Respiratory Questionnaire (SF-CRQ) is frequently used in patients with obstructive pulmonary disease and it has demonstrated excellent psychometric properties. Since there is no psychometric information for its use with lung cancer patients, this study explored its validity and reliability in this population. Forty-six patients were assessed at two time points (with a 4-week interval) using the SF-CRQ, the modified Borg Scale, five numerical rating scales related to Perceived Severity of Breathlessness, and the Hospital Anxiety and Depression Scale. Internal consistency reliability was investigated by Cronbach's alpha reliability coefficient, test-retest reliability by Spearman-Brown reliability coefficient (P), content validity as well as convergent validity by Pearson's correlation coefficient between the SF-CRQ, and the conceptual similar scales mentioned above were explored. A principal component factor analysis was performed. The internal consistency was high [α = 0.88 (baseline) and 0.91 (after 1 month)]. The SF-CRQ had good stability with test-retest reliability ranging from r = 0.64 to 0.78, P < 0.001. Factor analysis suggests a single construct in this population. The preliminary data analyses supported the convergent, content, and construct validity of the SF-CRQ providing promising evidence that this can be a valid and reliable instrument for the assessment of quality of life related to breathlessness in lung cancer patients. © 2015 John Wiley & Sons Ltd.

Illustrated structural application of universal first-order reliability method

NASA Technical Reports Server (NTRS)

Verderaime, V.

1994-01-01

The general application of the proposed first-order reliability method was achieved through the universal normalization of engineering probability distribution data. The method superimposes prevailing deterministic techniques and practices on the first-order reliability method to surmount deficiencies of the deterministic method and provide benefits of reliability techniques and predictions. A reliability design factor is derived from the reliability criterion to satisfy a specified reliability and is analogous to the deterministic safety factor. Its application is numerically illustrated on several practical structural design and verification cases with interesting results and insights. Two concepts of reliability selection criteria are suggested. Though the method was developed to support affordable structures for access to space, the method should also be applicable for most high-performance air and surface transportation systems.

The reasons for betel-quid chewing scale: assessment of factor structure, reliability, and validity.

PubMed

Little, Melissa A; Pokhrel, Pallav; Murphy, Kelle L; Kawamoto, Crissy T; Suguitan, Gil S; Herzog, Thaddeus A

2014-06-03

Despite the fact that betel-quid is one of the most commonly used psychoactive substances worldwide and a major risk-factor for head-and-neck cancer incidence and mortality globally, currently no standardized instrument is available to assess the reasons why individuals chew betel-quid. A measure to assess reasons for chewing betel-quid could help researchers and clinicians develop prevention and treatment strategies. In the current study, we sought to develop and evaluate a self-report instrument for assessing the reasons for chewing betel quid which contributes toward the goal of developing effective interventions to reduce betel quid chewing in vulnerable populations. The current study assessed the factor structure, reliability and convergent validity of the Reasons for Betel-quid Chewing Scale (RBCS), a newly developed 10 item measure adapted from several existing "reasons for smoking" scales. The measure was administered to 351 adult betel-quid chewers in Guam. Confirmatory factor analysis of this measure revealed a three factor structure: reinforcement, social/cultural, and stimulation. Further tests revealed strong support for the internal consistency and convergent validity of this three factor measure. The goal of designing an intervention to reduce betel-quid chewing necessitates an understanding of why chewers chew; the current study makes considerable contributions towards that objective.

Higher- and Lower-Order Factor Analyses of the Temperament in Middle Childhood Questionnaire

PubMed Central

Kotelnikova, Yuliya; Olino, Thomas M.; Klein, Daniel N.; Mackrell, Sarah V.M.; Hayden, Elizabeth P.

2017-01-01

The Temperament in Middle Childhood Questionnaire (TMCQ; Simonds & Rothbart, 2004) is a widely used parent-report measure of temperament. However, neither its lower- nor higher-order structures have been tested via a bottom-up, empirically based approach. We conducted higher- and lower-order exploratory factor analyses (EFAs) of the TMCQ in a large (N = 654) sample of 9-year-olds. Item-level EFAs identified 92 items as suitable (i.e., with loadings ≥.40) for constructing lower-order factors, only half of which resembled a TMCQ scale posited by the measure’s authors. Higher-order EFAs of the lower-order factors showed that a three-factor structure (Impulsivity/Negative Affectivity, Negative Affectivity, and Openness/Assertiveness) was the only admissible solution. Overall, many TMCQ items did not load well onto a lower-order factor. In addition, only three factors, which did not show a clear resemblance to Rothbart’s four-factor model of temperament in middle childhood, were needed to account for the higher-order structure of the TMCQ. PMID:27002124

Reliability of an experimental method to analyse the impact point on a golf ball during putting.

PubMed

Richardson, Ashley K; Mitchell, Andrew C S; Hughes, Gerwyn

2015-06-01

This study aimed to examine the reliability of an experimental method identifying the location of the impact point on a golf ball during putting. Forty trials were completed using a mechanical putting robot set to reproduce a putt of 3.2 m, with four different putter-ball combinations. After locating the centre of the dimple pattern (centroid) the following variables were tested; distance of the impact point from the centroid, angle of the impact point from the centroid and distance of the impact point from the centroid derived from the X, Y coordinates. Good to excellent reliability was demonstrated in all impact variables reflected in very strong relative (ICC = 0.98-1.00) and absolute reliability (SEM% = 0.9-4.3%). The highest SEM% observed was 7% for the angle of the impact point from the centroid. In conclusion, the experimental method was shown to be reliable at locating the centroid location of a golf ball, therefore allowing for the identification of the point of impact with the putter head and is suitable for use in subsequent studies.

Reliability and accuracy of Crystaleye spectrophotometric system.

PubMed

Chen, Li; Tan, Jian Guo; Zhou, Jian Feng; Yang, Xu; Du, Yang; Wang, Fang Ping

2010-01-01

to develop an in vitro shade-measuring model to evaluate the reliability and accuracy of the Crystaleye spectrophotometric system, a newly developed spectrophotometer. four shade guides, VITA Classical, VITA 3D-Master, Chromascop and Vintage Halo NCC, were measured with the Crystaleye spectrophotometer in a standardised model, ten times for 107 shade tabs. The shade-matching results and the CIE L*a*b* values of the cervical, body and incisal regions for each measurement were automatically analysed using the supporting software. Reliability and accuracy were calculated for each shade tab both in percentage and in colour difference (ΔE). Difference was analysed by one-way ANOVA in the cervical, body and incisal regions. range of reliability was 88.81% to 98.97% and 0.13 to 0.24 ΔE units, and that of accuracy was 44.05% to 91.25% and 1.03 to 1.89 ΔE units. Significant differences in reliability and accuracy were found between the body region and the cervical and incisal regions. Comparisons made among regions and shade guides revealed that evaluation in ΔE was prone to disclose the differences. measurements with the Crystaleye spectrophotometer had similar, high reliability in different shade guides and regions, indicating predictable repeated measurements. Accuracy in the body region was high and less variable compared with the cervical and incisal regions.

Factor Structure, Reliability and Measurement Invariance of the Alberta Context Tool and the Conceptual Research Utilization Scale, for German Residential Long Term Care

PubMed Central

Hoben, Matthias; Estabrooks, Carole A.; Squires, Janet E.; Behrens, Johann

2016-01-01

We translated the Canadian residential long term care versions of the Alberta Context Tool (ACT) and the Conceptual Research Utilization (CRU) Scale into German, to study the association between organizational context factors and research utilization in German nursing homes. The rigorous translation process was based on best practice guidelines for tool translation, and we previously published methods and results of this process in two papers. Both instruments are self-report questionnaires used with care providers working in nursing homes. The aim of this study was to assess the factor structure, reliability, and measurement invariance (MI) between care provider groups responding to these instruments. In a stratified random sample of 38 nursing homes in one German region (Metropolregion Rhein-Neckar), we collected questionnaires from 273 care aides, 196 regulated nurses, 152 allied health providers, 6 quality improvement specialists, 129 clinical leaders, and 65 nursing students. The factor structure was assessed using confirmatory factor models. The first model included all 10 ACT concepts. We also decided a priori to run two separate models for the scale-based and the count-based ACT concepts as suggested by the instrument developers. The fourth model included the five CRU Scale items. Reliability scores were calculated based on the parameters of the best-fitting factor models. Multiple-group confirmatory factor models were used to assess MI between provider groups. Rather than the hypothesized ten-factor structure of the ACT, confirmatory factor models suggested 13 factors. The one-factor solution of the CRU Scale was confirmed. The reliability was acceptable (>0.7 in the entire sample and in all provider groups) for 10 of 13 ACT concepts, and high (0.90–0.96) for the CRU Scale. We could demonstrate partial strong MI for both ACT models and partial strict MI for the CRU Scale. Our results suggest that the scores of the German ACT and the CRU Scale for nursing

A Review of Operational Water Consumption and Withdrawal Factors for Electricity Generating Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macknick, Jordan; Newmark, Robin; Heath, Garvin

2011-03-01

This report provides estimates of operational water withdrawal and water consumption factors for electricity generating technologies in the United States. Estimates of water factors were collected from published primary literature and were not modified except for unit conversions. The presented water factors may be useful in modeling and policy analyses where reliable power plant level data are not available.

System reliability approaches for advanced propulsion system structures

NASA Technical Reports Server (NTRS)

Cruse, T. A.; Mahadevan, S.

1991-01-01

This paper identifies significant issues that pertain to the estimation and use of system reliability in the design of advanced propulsion system structures. Linkages between the reliabilities of individual components and their effect on system design issues such as performance, cost, availability, and certification are examined. The need for system reliability computation to address the continuum nature of propulsion system structures and synergistic progressive damage modes has been highlighted. Available system reliability models are observed to apply only to discrete systems. Therefore a sequential structural reanalysis procedure is formulated to rigorously compute the conditional dependencies between various failure modes. The method is developed in a manner that supports both top-down and bottom-up analyses in system reliability.

Investigation of improving MEMS-type VOA reliability

NASA Astrophysics Data System (ADS)

Hong, Seok K.; Lee, Yeong G.; Park, Moo Y.

2003-12-01

MEMS technologies have been applied to a lot of areas, such as optical communications, Gyroscopes and Bio-medical components and so on. In terms of the applications in the optical communication field, MEMS technologies are essential, especially, in multi dimensional optical switches and Variable Optical Attenuators(VOAs). This paper describes the process for the development of MEMS type VOAs with good optical performance and improved reliability. Generally, MEMS VOAs have been fabricated by silicon micro-machining process, precise fibre alignment and sophisticated packaging process. Because, it is composed of many structures with various materials, it is difficult to make devices reliable. We have developed MEMS type VOSs with many failure mode considerations (FMEA: Failure Mode Effect Analysis) in the initial design step, predicted critical failure factors and revised the design, and confirmed the reliability by preliminary test. These predicted failure factors were moisture, bonding strength of the wire, which wired between the MEMS chip and TO-CAN and instability of supplied signals. Statistical quality control tools (ANOVA, T-test and so on) were used to control these potential failure factors and produce optimum manufacturing conditions. To sum up, we have successfully developed reliable MEMS type VOAs with good optical performances by controlling potential failure factors and using statistical quality control tools. As a result, developed VOAs passed international reliability standards (Telcodia GR-1221-CORE).

Investigation of improving MEMS-type VOA reliability

NASA Astrophysics Data System (ADS)

Hong, Seok K.; Lee, Yeong G.; Park, Moo Y.

2004-01-01

MEMS technologies have been applied to a lot of areas, such as optical communications, Gyroscopes and Bio-medical components and so on. In terms of the applications in the optical communication field, MEMS technologies are essential, especially, in multi dimensional optical switches and Variable Optical Attenuators(VOAs). This paper describes the process for the development of MEMS type VOAs with good optical performance and improved reliability. Generally, MEMS VOAs have been fabricated by silicon micro-machining process, precise fibre alignment and sophisticated packaging process. Because, it is composed of many structures with various materials, it is difficult to make devices reliable. We have developed MEMS type VOSs with many failure mode considerations (FMEA: Failure Mode Effect Analysis) in the initial design step, predicted critical failure factors and revised the design, and confirmed the reliability by preliminary test. These predicted failure factors were moisture, bonding strength of the wire, which wired between the MEMS chip and TO-CAN and instability of supplied signals. Statistical quality control tools (ANOVA, T-test and so on) were used to control these potential failure factors and produce optimum manufacturing conditions. To sum up, we have successfully developed reliable MEMS type VOAs with good optical performances by controlling potential failure factors and using statistical quality control tools. As a result, developed VOAs passed international reliability standards (Telcodia GR-1221-CORE).

Reliability and Construct Validity of the Portuguese Version of the Psychological Capital Questionnaire.

PubMed

Antunes, Ana Cristina; Caetano, António; Pina E Cunha, Miguel

2017-06-01

The Psychological Capital Questionnaire (PCQ) is the most commonly used measure for assessing psychological capital in work settings. Although several studies confirmed its factorial validity, most validation studies only examined the four-factor structure preconized by Luthans, Youssef, and Avolio, not attending to empirical evidence on alternative factorial structures. The present study aimed to test the psychometric properties of the Portuguese version of the PCQ, by using two independent samples (NS1 = 542; NS2 = 115) of Portuguese employees. We conducted a series of confirmatory factor analyses and found that, unlike previous findings, a five-factor solution of the PCQ best fitted the data. The evidence obtained also supported the existence of a second-order factor, psychological capital. The coefficients of internal consistency, as measured by Cronbach's alpha, were adequate and test-retest reliability suggested that the PCQ presented a lower stability than personality factors. Convergent validity, assessed with average variance extracted, revealed problems in the optimism subscale. The discriminant validity of the PCQ was confirmed by its correlations with Positive and Negative Affect and Big Five personality factors. Hierarchical regression analyses showed that this measure has incremental validity over personality and affect when predicting job performance.

Investigation of the factor structure of the Wechsler Adult Intelligence Scale--Fourth Edition (WAIS-IV): exploratory and higher order factor analyses.

PubMed

Canivez, Gary L; Watkins, Marley W

2010-12-01

The present study examined the factor structure of the Wechsler Adult Intelligence Scale--Fourth Edition (WAIS-IV; D. Wechsler, 2008a) standardization sample using exploratory factor analysis, multiple factor extraction criteria, and higher order exploratory factor analysis (J. Schmid & J. M. Leiman, 1957) not included in the WAIS-IV Technical and Interpretation Manual (D. Wechsler, 2008b). Results indicated that the WAIS-IV subtests were properly associated with the theoretically proposed first-order factors, but all but one factor-extraction criterion recommended extraction of one or two factors. Hierarchical exploratory analyses with the Schmid and Leiman procedure found that the second-order g factor accounted for large portions of total and common variance, whereas the four first-order factors accounted for small portions of total and common variance. It was concluded that the WAIS-IV provides strong measurement of general intelligence, and clinical interpretation should be primarily at that level.

Exploratory and Higher-Order Factor Analyses of the Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV) Adolescent Subsample

ERIC Educational Resources Information Center

Canivez, Gary L.; Watkins, Marley W.

2010-01-01

The factor structure of the Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV; Wechsler, 2008a) with the adolescent participants (ages 16-19 years; N = 400) in the standardization sample was assessed using exploratory factor analysis, multiple factor extraction criteria, and higher-order exploratory factor analyses. Results from…

Influences on and Limitations of Classical Test Theory Reliability Estimates.

ERIC Educational Resources Information Center

Arnold, Margery E.

It is incorrect to say "the test is reliable" because reliability is a function not only of the test itself, but of many factors. The present paper explains how different factors affect classical reliability estimates such as test-retest, interrater, internal consistency, and equivalent forms coefficients. Furthermore, the limits of classical test…

A Validation Study of the Dutch Childhood Trauma Questionnaire-Short Form: Factor Structure, Reliability, and Known-Groups Validity

ERIC Educational Resources Information Center

Thombs, Brett D.; Bernstein, David P.; Lobbestael, Jill; Arntz, Arnoud

2009-01-01

Objective: The 28-item Childhood Trauma Questionnaire-Short Form (CTQ-SF) has been translated into at least 10 different languages. The validity of translated versions of the CTQ-SF, however, has generally not been examined. The objective of this study was to investigate the factor structure, internal consistency reliability, and known-groups…

An Assessment of Character and Leadership Development Latent Factor Structures through Confirmatory Factor, Item Response Theory, and Latent Class Analyses

ERIC Educational Resources Information Center

Higginbotham, David L.

2013-01-01

This study leveraged the complementary nature of confirmatory factor (CFA), item response theory (IRT), and latent class (LCA) analyses to strengthen the rigor and sophistication of evaluation of two new measures of the Air Force Academy's "leader of character" definition--the Character Mosaic Virtues (CMV) and the Leadership Mosaic…

The Three Domains of Disgust Scale: Factor Structure, Psychometric Properties, and Conceptual Limitations

ERIC Educational Resources Information Center

Olatunji, Bunmi O.; Adams, Thomas; Ciesielski, Bethany; David, Bieke; Sarawgi, Shivali; Broman-Fulks, Joshua

2012-01-01

This investigation examined the measurement properties of the Three Domains of Disgust Scale (TDDS). Principal components analysis in Study 1 (n = 206) revealed three factors of Pathogen, Sexual, and Moral Disgust that demonstrated excellent reliability, including test-retest over 12 weeks. Confirmatory factor analyses in Study 2 (n = 406)…

An Examination of Coach and Player Relationships According to the Adapted LMX 7 Scale: A Validity and Reliability Study

ERIC Educational Resources Information Center

Caliskan, Gokhan

2015-01-01

The current study aims to test the reliability and validity of the Leader-Member Exchange (LMX 7) scale with regard to coach--player relationships in sports settings. A total of 330 professional soccer players from the Turkish Super League as well as from the First and Second Leagues participated in this study. Factor analyses were performed to…

German validation of the Conners Adult ADHD Rating Scales (CAARS) II: reliability, validity, diagnostic sensitivity and specificity.

PubMed

Christiansen, H; Kis, B; Hirsch, O; Matthies, S; Hebebrand, J; Uekermann, J; Abdel-Hamid, M; Kraemer, M; Wiltfang, J; Graf, E; Colla, M; Sobanski, E; Alm, B; Rösler, M; Jacob, C; Jans, T; Huss, M; Schimmelmann, B G; Philipsen, A

2012-07-01

The German version of the Conners Adult ADHD Rating Scales (CAARS) has proven to show very high model fit in confirmative factor analyses with the established factors inattention/memory problems, hyperactivity/restlessness, impulsivity/emotional lability, and problems with self-concept in both large healthy control and ADHD patient samples. This study now presents data on the psychometric properties of the German CAARS-self-report (CAARS-S) and observer-report (CAARS-O) questionnaires. CAARS-S/O and questions on sociodemographic variables were filled out by 466 patients with ADHD, 847 healthy control subjects that already participated in two prior studies, and a total of 896 observer data sets were available. Cronbach's-alpha was calculated to obtain internal reliability coefficients. Pearson correlations were performed to assess test-retest reliability, and concurrent, criterion, and discriminant validity. Receiver Operating Characteristics (ROC-analyses) were used to establish sensitivity and specificity for all subscales. Coefficient alphas ranged from .74 to .95, and test-retest reliability from .85 to .92 for the CAARS-S, and from .65 to .85 for the CAARS-O. All CAARS subscales, except problems with self-concept correlated significantly with the Barrett Impulsiveness Scale (BIS), but not with the Wender Utah Rating Scale (WURS). Criterion validity was established with ADHD subtype and diagnosis based on DSM-IV criteria. Sensitivity and specificity were high for all four subscales. The reported results confirm our previous study and show that the German CAARS-S/O do indeed represent a reliable and cross-culturally valid measure of current ADHD symptoms in adults. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

RELIABILITY OF REPORTING ON LIFESTYLE AND AGRICULTURAL FACTORS BY A SAMPLE OF PARTICIPANTS IN THE AGRICULTURAL HEALTH STUDY FROM IOWA

EPA Science Inventory

Repeat interviews from 4,088 Iowa pesticide applicators participating in the Agricultural Health Study provided the opportunity to evaluate the reliability of self-reported information on pesticide use and various demographic and lifestyle factors. Self-completed questionnaire...

PV Module Reliability Workshop | Photovoltaic Research | NREL

Science.gov Websites

-year old PV system in Quebec, Canada-Alex Bradley, Tanya Dhir, Yves Poissant Solar panel design factors PV Module Reliability Workshop PV Module Reliability Workshop Tuesday, February 24, 2015 Chair : Michael Kempe The 2015 PV Module Reliability Workshop (PVMRW) continued in the tradition of this annual

A validity and reliability study of the coping self-efficacy scale

PubMed Central

Chesney, Margaret A.; Neilands, Torsten B.; Chambers, Donald B.; Taylor, Jonelle M.; Folkman, Susan

2006-01-01

Objectives Investigate the psychometric characteristics of the coping self-efficacy (CSE) scale, a 26-item measure of one’s confidence in performing coping behaviors when faced with life challenges. Design Data came from two randomized clinical trials (N1 = 149, N2 = 199) evaluating a theory-based Coping Effectiveness Training (CET) intervention in reducing psychological distress and increasing positive mood in persons coping with chronic illness. Methods The 348 participants were HIV-seropositive men with depressed mood who have sex with men. Participants were randomly assigned to intervention and comparison conditions and assessed pre- and post-intervention. Outcome variables included the CSE scale, ways of coping, and measures of social support and psychological distress and well-being. Results Exploratory (EFA) and confirmatory factor analyses (CFA) revealed a 13-item reduced form of the CSE scale with three factors: Use problem-focused coping (6 items, α = .91), stop unpleasant emotions and thoughts (4 items, α = .91), and get support from friends and family (3 items, α = .80). Internal consistency and test–retest reliability are strong for all three factors. Concurrent validity analyses showed these factors assess self-efficacy for different types of coping. Predictive validity analyses showed that residualized change scores in using problem- and emotion-focused coping skills were predictive of reduced psychological distress and increased psychological well-being over time. Conclusions The CSE scale provides a measure of a person’s perceived ability to cope effectively with life challenges, as well as a way to assess changes in CSE over time in intervention research. PMID:16870053

The Reliability and Validity of the Persian Version of Three-Factor Eating Questionnaire-R18 (TFEQ-R18) in Overweight and Obese Females

PubMed Central

Mostafavi, Seyed-Ali; Akhondzadeh, Shahin; Mohammadi, Mohammad Reza; Eshraghian, Mohammad Reza; Hosseini, Saeed; Chamari, Maryam; Keshavarz, Seyed Ali

2017-01-01

Objective : The Three-Factor Eating Questionnaire Reduced (TFEQ-R18) is one of the most widely used instruments for assessing eating behavior worldwide. The present study aimed at confirming the reliability and validity of the Persian version of TFEQ-R18 among overweight and obese females in Iran. Method: In the present study, 168 overweight and obese females consented to participate. We estimated the anthropometric indices and asked the participants to complete the TFEQ-R18. Beck Depression Inventory (BDI), Spielberger Anxiety Scale, Appetite Visual Analogue Rating Scale, Food Craving Questionnaire (FCQ), Compulsive Eating Scale (CES), and Restraint Eating Visual Analogue Rating Scale were performed simultaneously to assess concurrent validity. Two weeks later, TFEQ-R18 was repeated for 126 participants to assess test-retest reliability. Moreover, we reported the internal consistency and factor analysis of this questionnaire. Results: Using the results of the reliability analysis and exploratory factor analysis of the principal component by varimax rotation, we extracted 3 factors: hunger, cognitive restraint, and emotional eating. After removing the Items 16 and 18, the Cronbach’s alpha was increased to 0.73 (The Cronbach’s alpha of the factors was 0.84, 0.64, and 0.7, respectively). The results of the Pearson correlation revealed a consistency of 0.87 between the test and retest administrations (p = 0.001). Significant positive correlations were observed between TFEQ-R18 and BDI, Spielberger Anxiety Scale, FCQ, CES, appetite, body weight, fat percentage, and calorie intake. Moreover, a negative correlation was observed in Restraint Eating Visual Analogue Rating Scale and muscle percentage. Conclusion: This study aimed at presenting preliminary support for the reliability and validity of the Persian version of TFEQ-R18 and its psychometric characteristics. This instrument may be helpful in clinical practice and research studies of obesity, appetite, and

Validity and Reliability of the School Physical Activity Environment Questionnaire

ERIC Educational Resources Information Center

Martin, Jeffrey J.; McCaughtry, Nate; Flory, Sara; Murphy, Anne; Wisdom, Kimberlydawn

2011-01-01

The goal of the current study was to establish the factor validity of the Questionnaire Assessing School Physical Activity Environment (Robertson-Wilson, Levesque, & Holden, 2007) using confirmatory factor analysis procedures. Another goal was to establish internal reliability and test-retest reliability. The confirmatory factor analysis…

[Evaluation on the validity and reliability of the Diabetes Self-management Knowledge, Attitude, and Behavior Assessment Scale (DSKAB)].

PubMed

Liu, Xiaoli; Dai, Long; Chen, Bo; Feng, Nongping; Wu, Qianhui; Lin, Yonghai; Zhang, Lan; Tan, Dong; Zhang, Jinhua; Tu, Huijuan; Li, Changfeng; Wang, Wenjuan

2016-01-01

To evaluate the validity and reliability of Diabetes Self-management Knowledge, Attitude, and Behavior Assessment Scale (DSKAB). We selected 460 patients with diabetes in the community, used the scale which was after two rounds of the Delphi method and pilot study. Investigators surveyed the patients by the way of face to face. by draw lots, we selected 25 community diabetes randomly for repeating investigations after one week. The validity analyses included face validity, content validity, construct validity and discriminant validity. The reliability analyses included Cronbach's α coefficient, θ coefficient, Ω coefficient, split-half reliability and test-retest reliability. This study distributed a total of 460 questionnaires, reclaimed 442, qualified 432. The score of the scale was 254.59 ± 28.90, the scores of the knowledge, attitude, behavior sub-scales were 82.44 ± 11.24, 63.53 ± 5.77 and 108.61 ± 17.55, respectively. It had excellent face validity and content validity. The correlation coefficient was from 0.71 to 0.91 among three sub-scales and the scale, P<0.001. The common factor cumulative variance contribution rate of the scale and three sub-scales was from 57.28% to 67.19%, which achieved more than 50% of the approved standard, there was 25 common factors, 91 items of the total 98 items held factor loading ≥0.40 in its relevant common factor, it had good construct validity. The scores of high group and low group in three sub-scales were: knowledge (91.12 ± 3.62) and (69.96 ± 11.20), attitude (68.75 ± 4.51) and (58.79 ± 4.87), behavior (129.38 ± 8.53) and (89.65 ± 11.34),mean scores of three sub-scales were apparently different, which compared between high score group and low score group, the t value were - 19.45, -16.24 and -30.29, respectively, P<0.001, and it had good discriminant validity. The Cronbach's α coefficient of the scale and three sub-scales was from 0.79 to 0.93, the θ coefficient was from 0.86 to 0.95, the Ω coefficient

The reasons for betel-quid chewing scale: assessment of factor structure, reliability, and validity

PubMed Central

2014-01-01

Background Despite the fact that betel-quid is one of the most commonly used psychoactive substances worldwide and a major risk-factor for head-and-neck cancer incidence and mortality globally, currently no standardized instrument is available to assess the reasons why individuals chew betel-quid. A measure to assess reasons for chewing betel-quid could help researchers and clinicians develop prevention and treatment strategies. In the current study, we sought to develop and evaluate a self-report instrument for assessing the reasons for chewing betel quid which contributes toward the goal of developing effective interventions to reduce betel quid chewing in vulnerable populations. Methods The current study assessed the factor structure, reliability and convergent validity of the Reasons for Betel-quid Chewing Scale (RBCS), a newly developed 10 item measure adapted from several existing “reasons for smoking” scales. The measure was administered to 351 adult betel-quid chewers in Guam. Results Confirmatory factor analysis of this measure revealed a three factor structure: reinforcement, social/cultural, and stimulation. Further tests revealed strong support for the internal consistency and convergent validity of this three factor measure. Conclusion The goal of designing an intervention to reduce betel-quid chewing necessitates an understanding of why chewers chew; the current study makes considerable contributions towards that objective. PMID:24889863

Structural reliability assessment of the Oman India Pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Sharif, A.M.; Preston, R.

1996-12-31

Reliability techniques are increasingly finding application in design. The special design conditions for the deep water sections of the Oman India Pipeline dictate their use since the experience basis for application of standard deterministic techniques is inadequate. The paper discusses the reliability analysis as applied to the Oman India Pipeline, including selection of a collapse model, characterization of the variability in the parameters that affect pipe resistance to collapse, and implementation of first and second order reliability analyses to assess the probability of pipe failure. The reliability analysis results are used as the basis for establishing the pipe wall thicknessmore » requirements for the pipeline.« less

The reliability of multidimensional neuropsychological measures: from alpha to omega.

PubMed

Watkins, Marley W

To demonstrate that Coefficient omega, a model-based estimate, is more a more appropriate index of reliability than coefficient alpha for the multidimensional scales that are commonly employed by neuropsychologists. As an illustration, a structural model of an overarching general factor and four first-order factors for the WAIS-IV based on the standardization sample of 2200 participants was identified and omega coefficients were subsequently computed for WAIS-IV composite scores. Alpha coefficients were ≥ .90 and omega coefficients ranged from .75 to .88 for WAIS-IV factor index scores, indicating that the blend of general and group factor variance in each index score created a reliable multidimensional composite. However, the amalgam of variance from general and group factors did not allow the precision of Full Scale IQ (FSIQ) and factor index scores to be disentangled. In contrast, omega hierarchical coefficients were low for all four factor index scores (.10-.41), indicating that most of the reliable variance of each factor index score was due to the general intelligence factor. In contrast, the omega hierarchical coefficient for the FSIQ score was .84. Meaningful interpretation of WAIS-IV factor index scores as unambiguous indicators of group factors is imprecise, thereby fostering unreliable identification of neurocognitive strengths and weaknesses, whereas the WAIS-IV FSIQ score can be interpreted as a reliable measure of general intelligence. It was concluded that neuropsychologists should base their clinical decisions on reliable scores as indexed by coefficient omega.

A clinician-administered severity rating scale for illness anxiety: development, reliability, and validity of the H-YBOCS-M.

PubMed

Skritskaya, Natalia A; Carson-Wong, Amanda R; Moeller, James R; Shen, Sa; Barsky, Arthur J; Fallon, Brian A

2012-07-01

Clinician-administered measures to assess severity of illness anxiety and response to treatment are few. The authors evaluated a modified version of the hypochondriasis-Y-BOCS (H-YBOCS-M), a 19-item, semistructured, clinician-administered instrument designed to rate severity of illness-related thoughts, behaviors, and avoidance. The scale was administered to 195 treatment-seeking adults with DSM-IV hypochondriasis. Test-retest reliability was assessed in a subsample of 20 patients. Interrater reliability was assessed by 27 interviews independently rated by four raters. Sensitivity to change was evaluated in a subsample of 149 patients. Convergent and discriminant validity was examined by comparing H-YBOCS-M scores to other measures administered. Item clustering was examined with confirmatory and exploratory factor analyses. The H-YBOCS-M demonstrated good internal consistency, interrater and test-retest reliability, and sensitivity to symptom change with treatment. Construct validity was supported by significant higher correlations with scores on other measures of hypochondriasis than with nonhypochondriacal measures. Improvement over time in response to treatment correlated with improvement both on measures of hypochondriasis and on measures of somatization, depression, anxiety, and functional status. Confirmatory factor analysis did not show adequate fit for a three-factor model. Exploratory factor analysis revealed a five-factor solution with the first two factors consistent with the separation of the H-YBOCS-M items into the subscales of illness-related avoidance and compulsions. H-YBOCS-M appears to be valid, reliable, and appropriate as an outcome measure for treatment studies of illness anxiety. Study results highlight "avoidance" as a key feature of illness anxiety-with potentially important nosologic and treatment implications. © 2012 Wiley Periodicals, Inc.

A CLINICIAN-ADMINISTERED SEVERITY RATING SCALE FOR ILLNESS ANXIETY: DEVELOPMENT, RELIABILITY, AND VALIDITY OF THE H-YBOCS-M

PubMed Central

Skritskaya, Natalia A.; Carson-Wong, Amanda R.; Moeller, James R.; Shen, Sa; Barsky, Arthur J.; Fallon, Brian A.

2012-01-01

Background Clinician-administered measures to assess severity of illness anxiety and response to treatment are few. The authors evaluated a modified version of the hypochondriasis-Y-BOCS (H-YBOCS-M), a 19-item, semistructured, clinician-administered instrument designed to rate severity of illness-related thoughts, behaviors, and avoidance. Methods The scale was administered to 195 treatment-seeking adults with DSM-IV hypochondriasis. Test–retest reliability was assessed in a subsample of 20 patients. Interrater reliability was assessed by 27 interviews independently rated by four raters. Sensitivity to change was evaluated in a subsample of 149 patients. Convergent and discriminant validity was examined by comparing H-YBOCS-M scores to other measures administered. Item clustering was examined with confirmatory and exploratory factor analyses. Results The H-YBOCS-M demonstrated good internal consistency, interrater and test–retest reliability, and sensitivity to symptom change with treatment. Construct validity was supported by significant higher correlations with scores on other measures of hypochondriasis than with nonhypochondriacal measures. Improvement over time in response to treatment correlated with improvement both on measures of hypochondriasis and on measures of somatization, depression, anxiety, and functional status. Confirmatory factor analysis did not show adequate fit for a three-factor model. Exploratory factor analysis revealed a five-factor solution with the first two factors consistent with the separation of the H-YBOCS-M items into the subscales of illness-related avoidance and compulsions. Conclusions H-YBOCS-M appears to be valid, reliable, and appropriate as an outcome measure for treatment studies of illness anxiety. Study results highlight “avoidance” as a key feature of illness anxiety—with potentially important nosologic and treatment implications. PMID:22504935

The Norwegian Computerized Adaptive Test of Personality Disorder-Static Form (CAT-PD-SF): Reliability, Factor Structure, and Relationships With Personality Functioning.

PubMed

Thimm, Jens C

2017-12-01

The Computerized Adaptive Test of Personality Disorder-Static Form (CAT-PD-SF) is a self-report inventory developed to assess pathological personality traits. The current study explored the reliability and higher order factor structure of the Norwegian version of the CAT-PD-SF and the relationships between the CAT-PD traits and domains of personality functioning in an undergraduate student sample ( N = 375). In addition to the CAT-PD-SF, the short form of the Severity Indices of Personality Problems and the Brief Symptom Inventory were administered. The results showed that the Norwegian CAT-PD-SF has good score reliability. Factor analysis of the CAT-PD-SF scales indicated five superordinate factors that correspond to the trait domains of the alternative DSM-5 model for personality disorders. The CAT-PD traits were highly predictive of impaired personality functioning after controlling for psychological distress. It is concluded that the CAT-PD-SF is a promising tool for the assessment of personality disorder traits.

Reliability of Wireless Sensor Networks

PubMed Central

Dâmaso, Antônio; Rosa, Nelson; Maciel, Paulo

2014-01-01

Wireless Sensor Networks (WSNs) consist of hundreds or thousands of sensor nodes with limited processing, storage, and battery capabilities. There are several strategies to reduce the power consumption of WSN nodes (by increasing the network lifetime) and increase the reliability of the network (by improving the WSN Quality of Service). However, there is an inherent conflict between power consumption and reliability: an increase in reliability usually leads to an increase in power consumption. For example, routing algorithms can send the same packet though different paths (multipath strategy), which it is important for reliability, but they significantly increase the WSN power consumption. In this context, this paper proposes a model for evaluating the reliability of WSNs considering the battery level as a key factor. Moreover, this model is based on routing algorithms used by WSNs. In order to evaluate the proposed models, three scenarios were considered to show the impact of the power consumption on the reliability of WSNs. PMID:25157553

Reliability and Validity of the Telephone-Based eHealth Literacy Scale Among Older Adults: Cross-Sectional Survey.

PubMed

Stellefson, Michael; Paige, Samantha R; Tennant, Bethany; Alber, Julia M; Chaney, Beth H; Chaney, Don; Grossman, Suzanne

2017-10-26

Only a handful of studies have examined reliability and validity evidence of scores produced by the 8-item eHealth literacy Scale (eHEALS) among older adults. Older adults are generally more comfortable responding to survey items when asked by a real person rather than by completing self-administered paper-and-pencil or online questionnaires. However, no studies have explored the psychometrics of this scale when administered to older adults over the telephone. The objective of our study was to examine the reliability and internal structure of eHEALS data collected from older adults aged 50 years or older responding to items over the telephone. Respondents (N=283) completed eHEALS as part of a cross-sectional landline telephone survey. Exploratory structural equation modeling (E-SEM) analyses examined model fit of eHEALS scores with 1-, 2-, and 3-factor structures. Subsequent analyses based on the partial credit model explored the internal structure of eHEALS data. Compared with 1- and 2-factor models, the 3-factor eHEALS structure showed the best global E-SEM model fit indices (root mean square error of approximation=.07; comparative fit index=1.0; Tucker-Lewis index=1.0). Nonetheless, the 3 factors were highly correlated (r range .36 to .65). Item analyses revealed that eHEALS items 2 through 5 were overfit to a minor degree (mean square infit/outfit values <1.0; t statistics less than -2.0), but the internal structure of Likert scale response options functioned as expected. Overfitting eHEALS items (2-5) displayed a similar degree of information for respondents at similar points on the latent continuum. Test information curves suggested that eHEALS may capture more information about older adults at the higher end of the latent continuum (ie, those with high eHealth literacy) than at the lower end of the continuum (ie, those with low eHealth literacy). Item reliability (value=.92) and item separation (value=11.31) estimates indicated that eHEALS responses were

Reliability Evaluation and Improvement Approach of Chemical Production Man - Machine - Environment System

NASA Astrophysics Data System (ADS)

Miao, Yongchun; Kang, Rongxue; Chen, Xuefeng

2017-12-01

In recent years, with the gradual extension of reliability research, the study of production system reliability has become the hot topic in various industries. Man-machine-environment system is a complex system composed of human factors, machinery equipment and environment. The reliability of individual factor must be analyzed in order to gradually transit to the research of three-factor reliability. Meanwhile, the dynamic relationship among man-machine-environment should be considered to establish an effective blurry evaluation mechanism to truly and effectively analyze the reliability of such systems. In this paper, based on the system engineering, fuzzy theory, reliability theory, human error, environmental impact and machinery equipment failure theory, the reliabilities of human factor, machinery equipment and environment of some chemical production system were studied by the method of fuzzy evaluation. At last, the reliability of man-machine-environment system was calculated to obtain the weighted result, which indicated that the reliability value of this chemical production system was 86.29. Through the given evaluation domain it can be seen that the reliability of man-machine-environment integrated system is in a good status, and the effective measures for further improvement were proposed according to the fuzzy calculation results.

Enhancing healthcare process design with human factors engineering and reliability science, part 1: setting the context.

PubMed

Boston-Fleischhauer, Carol

2008-01-01

The design and implementation of efficient, effective, and safe processes are never-ending challenges in healthcare. Less than optimal performance levels and rising concerns about patient safety suggest that traditional process design methods are insufficient to meet design requirements. In this 2-part series, the author presents human factors engineering and reliability science as important knowledge to enhance existing operational and clinical process design methods in healthcare. An examination of these theories, application approaches, and examples are presented.

On modeling human reliability in space flights - Redundancy and recovery operations

NASA Astrophysics Data System (ADS)

Aarset, M.; Wright, J. F.

The reliability of humans is of paramount importance to the safety of space flight systems. This paper describes why 'back-up' operators might not be the best solution, and in some cases, might even degrade system reliability. The problem associated with human redundancy calls for special treatment in reliability analyses. The concept of Standby Redundancy is adopted, and psychological and mathematical models are introduced to improve the way such problems can be estimated and handled. In the past, human reliability has practically been neglected in most reliability analyses, and, when included, the humans have been modeled as a component and treated numerically the way technical components are. This approach is not wrong in itself, but it may lead to systematic errors if too simple analogies from the technical domain are used in the modeling of human behavior. In this paper redundancy in a man-machine system will be addressed. It will be shown how simplification from the technical domain, when applied to human components of a system, may give non-conservative estimates of system reliability.

VALIDITY AND RELIABILITY OF THE SPIRITUAL COPING STRATEGIES SCALE ARABIC VERSION IN SAUDI PATIENTS UNDERGOING HAEMODIALYSIS.

PubMed

Cruz, Jonas P; Baldacchino, Donia R; Alquwez, Nahed

2016-06-01

Patients often resort to religious and spiritual activities to cope with physical and mental challenges. The effect of spiritual coping on overall health, adaptation and health-related quality of life among patients undergoing haemodialysis (HD) is well documented. Thus, it is essential to establish a valid and reliable instrument that can assess both the religious and non-religious coping methods in patients undergoing HD. This study aimed to assess the validity and reliability of the Spiritual Coping Strategies Scale Arabic version (SCS-A) in Saudi patients undergoing HD. A convenience sample of 60 Saudi patients undergoing HD was recruited for this descriptive, cross-sectional study. Data were collected between May and June 2015. Forward-backward translation was used to formulate the SCS-A. The SCS-A, Muslim Religiosity Scale and the Quality of Life Index Dialysis Version III were used to procure the data. Internal consistency reliability, stability reliability, factor analysis and construct validity tests were performed. Analyses were set at the 0.05 level of significance. The SCS-A showed an acceptable internal consistency and strong stability reliability over time. The EFA produced two factors (non-religious and religious coping). Satisfactory construct validity was established by the convergent and divergent validity and known-groups method. The SCS-A is a reliable and valid tool that can be used to measure the religious and non-religious coping strategies of patients undergoing HD in Saudi Arabia and other Muslim and Arabic-speaking countries. © 2016 European Dialysis and Transplant Nurses Association/European Renal Care Association.

Classification of L2 Vocabulary Learning Strategies: Evidence from Exploratory and Confirmatory Factor Analyses

ERIC Educational Resources Information Center

Zhang, Bo; Li, Changyu

2011-01-01

This research presents a classification theory for the L2 vocabulary learning strategies. Based on the exploratory and confirmatory factor analyses of strategies that adult Chinese English learners used, this theory identifies six categories, four of which are related to the cognitive process in lexical acquisition and the other two are…

Updated Reliability Evaluation of V730 Transmission

DOT National Transportation Integrated Search

1983-11-01

This report culminates a two-year review of factors concerning the reliability of the Detroit Diesel Allison V730 automatic three-speed transmission for urban transit buses. This report is a continuing examination of the transmission's reliability. M...

Improving Predictions with Reliable Extrapolation Schemes and Better Understanding of Factorization

NASA Astrophysics Data System (ADS)

More, Sushant N.

New insights into the inter-nucleon interactions, developments in many-body technology, and the surge in computational capabilities has led to phenomenal progress in low-energy nuclear physics in the past few years. Nonetheless, many calculations still lack a robust uncertainty quantification which is essential for making reliable predictions. In this work we investigate two distinct sources of uncertainty and develop ways to account for them. Harmonic oscillator basis expansions are widely used in ab-initio nuclear structure calculations. Finite computational resources usually require that the basis be truncated before observables are fully converged, necessitating reliable extrapolation schemes. It has been demonstrated recently that errors introduced from basis truncation can be taken into account by focusing on the infrared and ultraviolet cutoffs induced by a truncated basis. We show that a finite oscillator basis effectively imposes a hard-wall boundary condition in coordinate space. We accurately determine the position of the hard-wall as a function of oscillator space parameters, derive infrared extrapolation formulas for the energy and other observables, and discuss the extension of this approach to higher angular momentum and to other localized bases. We exploit the duality of the harmonic oscillator to account for the errors introduced by a finite ultraviolet cutoff. Nucleon knockout reactions have been widely used to study and understand nuclear properties. Such an analysis implicitly assumes that the effects of the probe can be separated from the physics of the target nucleus. This factorization between nuclear structure and reaction components depends on the renormalization scale and scheme, and has not been well understood. But it is potentially critical for interpreting experiments and for extracting process-independent nuclear properties. We use a class of unitary transformations called the similarity renormalization group (SRG) transformations to

Why the Major Field Test in Business Does Not Report Subscores: Reliability and Construct Validity Evidence. Research Report. ETS RR-12-11

ERIC Educational Resources Information Center

Ling, Guangming

2012-01-01

To assess the value of individual students' subscores on the Major Field Test in Business (MFT Business), I examined the test's internal structure with factor analysis and structural equation model methods, and analyzed the subscore reliabilities using the augmented scores method. Analyses of the internal structure suggested that the MFT Business…

The reliability of a quality appraisal tool for studies of diagnostic reliability (QAREL).

PubMed

Lucas, Nicholas; Macaskill, Petra; Irwig, Les; Moran, Robert; Rickards, Luke; Turner, Robin; Bogduk, Nikolai

2013-09-09

The aim of this project was to investigate the reliability of a new 11-item quality appraisal tool for studies of diagnostic reliability (QAREL). The tool was tested on studies reporting the reliability of any physical examination procedure. The reliability of physical examination is a challenging area to study given the complex testing procedures, the range of tests, and lack of procedural standardisation. Three reviewers used QAREL to independently rate 29 articles, comprising 30 studies, published during 2007. The articles were identified from a search of relevant databases using the following string: "Reproducibility of results (MeSH) OR reliability (t.w.) AND Physical examination (MeSH) OR physical examination (t.w.)." A total of 415 articles were retrieved and screened for inclusion. The reviewers undertook an independent trial assessment prior to data collection, followed by a general discussion about how to score each item. At no time did the reviewers discuss individual papers. Reliability was assessed for each item using multi-rater kappa (κ). Multi-rater reliability estimates ranged from κ = 0.27 to 0.92 across all items. Six items were recorded with good reliability (κ > 0.60), three with moderate reliability (κ = 0.41 - 0.60), and two with fair reliability (κ = 0.21 - 0.40). Raters found it difficult to agree about the spectrum of patients included in a study (Item 1) and the correct application and interpretation of the test (Item 10). In this study, we found that QAREL was a reliable assessment tool for studies of diagnostic reliability when raters agreed upon criteria for the interpretation of each item. Nine out of 11 items had good or moderate reliability, and two items achieved fair reliability. The heterogeneity in the tests included in this study may have resulted in an underestimation of the reliability of these two items. We discuss these and other factors that could affect our results and make recommendations for the use of QAREL.

Reliability and validity of the Brief Pain Inventory in individuals with chronic obstructive pulmonary disease.

PubMed

Chen, Y-W; HajGhanbari, B; Road, J D; Coxson, H O; Camp, P G; Reid, W D

2018-06-08

Pain is prevalent in chronic obstructive pulmonary disease (COPD) and the Brief Pain Inventory (BPI) appears to be a feasible questionnaire to assess this symptom. However, the reliability and validity of the BPI have not been determined in individuals with COPD. This study aimed to determine the internal consistency, test-retest reliability and validity (construct, convergent, divergent and discriminant) of the BPI in individuals with COPD. In order to examine the test-retest reliability, individuals with COPD were recruited from pulmonary rehabilitation programmes to complete the BPI twice 1 week apart. In order to investigate validity, de-identified data was retrieved from two previous studies, including forced expiratory volume in 1-s, age, sex and data from four questionnaires: the BPI, short-form McGill Pain Questionnaire (SF-MPQ), 36-Item Short Form Survey (SF-36) and Community Health Activities Model Program for Seniors (CHAMPS) questionnaire. In total, 123 participants were included in the analyses (eligible data were retrieved from 86 participants and additional 37 participants were recruited). The BPI demonstrated excellent internal consistency and test-retest reliability. It also showed convergent validity with the SF-MPQ and divergent validity with the SF-36. The factor analysis yielded two factors of the BPI, which demonstrated that the two domains of the BPI measure the intended constructs. The BPI can also discriminate pain levels among COPD patients with varied levels of quality of life (SF-36) and physical activity (CHAMPS). The BPI is a reliable and valid pain questionnaire that can be used to evaluate pain in COPD. This study formally established the reliability and validity of the BPI in individuals with COPD, which have not been determined in this patient group. The results of this study provide strong evidence that assessment results from this pain questionnaire are reliable and valid. © 2018 European Pain Federation - EFIC®.

The Chinese Family Assessment Instrument (C-FAI): Hierarchical Confirmatory Factor Analyses and Factorial Invariance

ERIC Educational Resources Information Center

Shek, Daniel T. L.; Ma, Cecilia M. S.

2010-01-01

Objective: This paper examines the dimensionality and factorial invariance of the Chinese Family Assessment Instrument (C-FAI) using multigroup confirmatory factor analyses (MCFAs). Method: A total of 3,649 students responded to the C-FAI in a community survey. Results: Results showed that there are five dimensions of the C-FAI (communication,…

How Many Sleep Diary Entries Are Needed to Reliably Estimate Adolescent Sleep?

PubMed Central

Arora, Teresa; Gradisar, Michael; Taheri, Shahrad; Carskadon, Mary A.

2017-01-01

Abstract Study Objectives: To investigate (1) how many nights of sleep diary entries are required for reliable estimates of five sleep-related outcomes (bedtime, wake time, sleep onset latency [SOL], sleep duration, and wake after sleep onset [WASO]) and (2) the test–retest reliability of sleep diary estimates of school night sleep across 12 weeks. Methods: Data were drawn from four adolescent samples (Australia [n = 385], Qatar [n = 245], United Kingdom [n = 770], and United States [n = 366]), who provided 1766 eligible sleep diary weeks for reliability analyses. We performed reliability analyses for each cohort using complete data (7 days), one to five school nights, and one to two weekend nights. We also performed test–retest reliability analyses on 12-week sleep diary data available from a subgroup of 55 US adolescents. Results: Intraclass correlation coefficients for bedtime, SOL, and sleep duration indicated good-to-excellent reliability from five weekday nights of sleep diary entries across all adolescent cohorts. Four school nights was sufficient for wake times in the Australian and UK samples, but not the US or Qatari samples. Only Australian adolescents showed good reliability for two weekend nights of bedtime reports; estimates of SOL were adequate for UK adolescents based on two weekend nights. WASO was not reliably estimated using 1 week of sleep diaries. We observed excellent test–rest reliability across 12 weeks of sleep diary data in a subsample of US adolescents. Conclusion: We recommend at least five weekday nights of sleep dairy entries to be made when studying adolescent bedtimes, SOL, and sleep duration. Adolescent sleep patterns were stable across 12 consecutive school weeks. PMID:28199718

Factors that influence standard automated perimetry test results in glaucoma: test reliability, technician experience, time of day, and season.

PubMed

Junoy Montolio, Francisco G; Wesselink, Christiaan; Gordijn, Marijke; Jansonius, Nomdo M

2012-10-09

To determine the influence of several factors on standard automated perimetry test results in glaucoma. Longitudinal Humphrey field analyzer 30-2 Swedish interactive threshold algorithm data from 160 eyes of 160 glaucoma patients were used. The influence of technician experience, time of day, and season on the mean deviation (MD) was determined by performing linear regression analysis of MD against time on a series of visual fields and subsequently performing a multiple linear regression analysis with the MD residuals as dependent variable and the factors mentioned above as independent variables. Analyses were performed with and without adjustment for the test reliability (fixation losses and false-positive and false-negative answers) and with and without stratification according to disease stage (baseline MD). Mean follow-up was 9.4 years, with on average 10.8 tests per patient. Technician experience, time of day, and season were associated with the MD. Approximately 0.2 dB lower MD values were found for inexperienced technicians (P < 0.001), tests performed after lunch (P < 0.001), and tests performed in the summer or autumn (P < 0.001). The effects of time of day and season appeared to depend on disease stage. Independent of these effects, the percentage of false-positive answers strongly influenced the MD with a 1 dB increase in MD per 10% increase in false-positive answers. Technician experience, time of day, season, and the percentage of false-positive answers have a significant influence on the MD of standard automated perimetry.

Development and assessment of the validity and reliability of a scale for measuring the mentoring competencies of Japanese clinical midwives: An exploratory quantitative research study.

PubMed

Hishinuma, Yuri; Horiuchi, Shigeko; Yanai, Haruo

2016-06-01

Midwives are always involved in educational activities whenever novice midwives are present. Although various scales for measuring the educational competencies of nurses have already been developed in previous studies, a scale for the educational competencies particular to midwives has yet to be developed, or even no previous studies have revealed their functions as clinical educators. The purpose of this study was to develop a scale to measure the mentoring competencies of clinical midwives (MCCM Scale) and to confirm its validity and reliability. An exploratory quantitative research study. Questionnaires were distributed to 1,645 midwives at 148 facilities who had previously instructed novice midwives. 1,004 midwives (61.0%) voluntarily returned valid responses and 296 (18.0%) voluntarily agreed to participate in the survey for test-retest reliability. Exploratory factor analyses were performed over 41 items and the following seven factors were extracted with a reliability coefficient (Cronbach's α) of 0.953: (i) supporting experimental study, (ii) personal characteristics particularly in clinical educators, (iii) thoughtfulness and empathy for new midwives, (iv) self-awareness and self-reflection for finding confidence, (v) making effective use of the new midwives' own experience, (vi) commitment to educational activities, and (vii) sharing their midwifery practice. Test-retest reliability was measured based on a convenience sample of 246 (83.1%). Pearson's test-retest correlation coefficient for the entire scale was r=0.863. The factor loadings of each item on its respective factor were 0.313-0.925. The total score of the MCCM Scale was positively correlated with that of the Quality of Nurses' Occupational Experience Scale (r=0.641, p=0.000) and was negatively correlated with the total score of the Japanese Burnout Scale (r=-0.480, p=0.000). The MCCM Scale is composed of 41 items and three subscales measured from a total of seven factors. The validity and

Characterising the reproducibility and reliability of dietary patterns among Yup'ik Alaska Native people.

PubMed

Ryman, Tove K; Boyer, Bert B; Hopkins, Scarlett; Philip, Jacques; O'Brien, Diane; Thummel, Kenneth; Austin, Melissa A

2015-02-28

FFQ data can be used to characterise dietary patterns for diet-disease association studies. In the present study, we evaluated three previously defined dietary patterns--'subsistence foods', market-based 'processed foods' and 'fruits and vegetables'--among a sample of Yup'ik people from Southwest Alaska. We tested the reproducibility and reliability of the dietary patterns, as well as the associations of these patterns with dietary biomarkers and participant characteristics. We analysed data from adult study participants who completed at least one FFQ with the Center for Alaska Native Health Research 9/2009-5/2013. To test the reproducibility of the dietary patterns, we conducted a confirmatory factor analysis (CFA) of a hypothesised model using eighteen food items to measure the dietary patterns (n 272). To test the reliability of the dietary patterns, we used the CFA to measure composite reliability (n 272) and intra-class correlation coefficients for test-retest reliability (n 113). Finally, to test the associations, we used linear regression (n 637). All factor loadings, except one, in CFA indicated acceptable correlations between foods and dietary patterns (r>0·40), and model-fit criteria were >0·90. Composite and test-retest reliability of the dietary patterns were, respectively, 0·56 and 0·34 for 'subsistence foods', 0·73 and 0·66 for 'processed foods', and 0·72 and 0·54 for 'fruits and vegetables'. In the multi-predictor analysis, the dietary patterns were significantly associated with dietary biomarkers, community location, age, sex and self-reported lifestyle. This analysis confirmed the reproducibility and reliability of the dietary patterns in the present study population. These dietary patterns can be used for future research and development of dietary interventions in this underserved population.

A two-factor theory for concussion assessment using ImPACT: memory and speed.

PubMed

Schatz, Philip; Maerlender, Arthur

2013-12-01

We present the initial validation of a two-factor structure of Immediate Post-Concussion Assessment and Cognitive Testing (ImPACT) using ImPACT composite scores and document the reliability and validity of this factor structure. Factor analyses were conducted for baseline (N = 21,537) and post-concussion (N = 560) data, yielding "Memory" (Verbal and Visual) and "Speed" (Visual Motor Speed and Reaction Time) Factors; inclusion of Total Symptom Scores resulted in a third discrete factor. Speed and Memory z-scores were calculated, and test-retest reliability (using intra-class correlation coefficients) at 1 month (0.88/0.81), 1 year (0.85/0.75), and 2 years (0.76/0.74) were higher than published data using Composite scores. Speed and Memory scores yielded 89% sensitivity and 70% specificity, which was higher than composites (80%/62%) and comparable with subscales (91%/69%). This emergent two-factor structure has improved test-retest reliability with no loss of sensitivity/specificity and may improve understanding and interpretability of ImPACT test results.

Drift Reliability Assessment of a Four Storey Frame Residential Building Under Seismic Loading Considering Multiple Factors

NASA Astrophysics Data System (ADS)

Sil, Arjun; Longmailai, Thaihamdau

2017-09-01

The lateral displacement of Reinforced Concrete (RC) frame building during an earthquake has an important impact on the structural stability and integrity. However, seismic analysis and design of RC building needs more concern due to its complex behavior as the performance of the structure links to the features of the system having many influencing parameters and other inherent uncertainties. The reliability approach takes into account the factors and uncertainty in design influencing the performance or response of the structure in which the safety level or the probability of failure could be ascertained. This present study, aims to assess the reliability of seismic performance of a four storey residential RC building seismically located in Zone-V as per the code provisions given in the Indian Standards IS: 1893-2002. The reliability assessment performed by deriving an explicit expression for maximum roof-lateral displacement as a failure function by regression method. A total of 319, four storey RC buildings were analyzed by linear static method using SAP2000. However, the change in the lateral-roof displacement with the variation of the parameters (column dimension, beam dimension, grade of concrete, floor height and total weight of the structure) was observed. A generalized relation established by regression method which could be used to estimate the expected lateral displacement owing to those selected parameters. A comparison made between the displacements obtained from analysis with that of the equation so formed. However, it shows that the proposed relation could be used directly to determine the expected maximum lateral displacement. The data obtained from the statistical computations was then used to obtain the probability of failure and the reliability.

Relating design and environmental variables to reliability

NASA Astrophysics Data System (ADS)

Kolarik, William J.; Landers, Thomas L.

The combination of space application and nuclear power source demands high reliability hardware. The possibilities of failure, either an inability to provide power or a catastrophic accident, must be minimized. Nuclear power experiences on the ground have led to highly sophisticated probabilistic risk assessment procedures, most of which require quantitative information to adequately assess such risks. In the area of hardware risk analysis, reliability information plays a key role. One of the lessons learned from the Three Mile Island experience is that thorough analyses of critical components are essential. Nuclear grade equipment shows some reliability advantages over commercial. However, no statistically significant difference has been found. A recent study pertaining to spacecraft electronics reliability, examined some 2500 malfunctions on more than 300 aircraft. The study classified the equipment failures into seven general categories. Design deficiencies and lack of environmental protection accounted for about half of all failures. Within each class, limited reliability modeling was performed using a Weibull failure model.

Validity of personality measurement in adults with anxiety disorders: psychometric properties of the Spanish NEO-FFI-R using Rasch analyses

PubMed Central

Inchausti, Felix; Mole, Joe; Fonseca-Pedrero, Eduardo; Ortuño-Sierra, Javier

2015-01-01

The aim of this study was to analyse the psychometric properties of the Spanish NEO Five Factor Inventory–Revised (NEO-FFI-R) using Rasch analyses, in order to test its rating scale functioning, the reliability of scores, internal structure, and differential item functioning (DIF) by gender in a psychiatric sample. The NEO-FFI-R responses of 433 Spanish adults (154 males) with an anxiety disorder as primary diagnosis were analysed using the Rasch model for rating scales. Two intermediate categories of response (‘neutral’ and ‘agree’) malfunctioned in the Neuroticism and Conscientiousness scales. In addition, model reliabilities were lower than expected in Agreeableness and Neuroticism, and the item fit values indicated each scale had items that did not achieve moderate to high discrimination on its dimension, particularly in the Agreeableness scale. Concerning unidimensionality, the five NEO-FFI-R scales showed large first components of unexplained variance. Finally, DIF by gender was detected in many items. The results suggest that the scores of the Spanish NEO-FFI-R are unreliable in psychiatric samples and cannot be generalized between males and females, especially in the Openness, Conscientiousness, and Agreeableness scales. Future directions for testing and refinement should be developed before the NEO-FFI-R can be used reliably in clinical samples. PMID:25954224

Reliability and validity of a treatment fidelity assessment for motivational interviewing targeting sexual risk behaviors in people living with HIV/AIDS.

PubMed

Seng, Elizabeth K; Lovejoy, Travis I

2013-12-01

This study psychometrically evaluates the Motivational Interviewing Treatment Integrity Code (MITI) to assess fidelity to motivational interviewing to reduce sexual risk behaviors in people living with HIV/AIDS. 74 sessions from a pilot randomized controlled trial of motivational interviewing to reduce sexual risk behaviors in people living with HIV were coded with the MITI. Participants reported sexual behavior at baseline, 3-month, and 6-months. Regarding reliability, excellent inter-rater reliability was achieved for measures of behavior frequency across the 12 sessions coded by both coders; global scales demonstrated poor intraclass correlations, but adequate percent agreement. Regarding validity, principle components analyses indicated that a two-factor model accounted for an adequate amount of variance in the data. These factors were associated with decreases in sexual risk behaviors after treatment. The MITI is a reliable and valid measurement of treatment fidelity for motivational interviewing targeting sexual risk behaviors in people living with HIV/AIDS.

Reliability modeling of fault-tolerant computer based systems

NASA Technical Reports Server (NTRS)

Bavuso, Salvatore J.

1987-01-01

Digital fault-tolerant computer-based systems have become commonplace in military and commercial avionics. These systems hold the promise of increased availability, reliability, and maintainability over conventional analog-based systems through the application of replicated digital computers arranged in fault-tolerant configurations. Three tightly coupled factors of paramount importance, ultimately determining the viability of these systems, are reliability, safety, and profitability. Reliability, the major driver affects virtually every aspect of design, packaging, and field operations, and eventually produces profit for commercial applications or increased national security. However, the utilization of digital computer systems makes the task of producing credible reliability assessment a formidable one for the reliability engineer. The root of the problem lies in the digital computer's unique adaptability to changing requirements, computational power, and ability to test itself efficiently. Addressed here are the nuances of modeling the reliability of systems with large state sizes, in the Markov sense, which result from systems based on replicated redundant hardware and to discuss the modeling of factors which can reduce reliability without concomitant depletion of hardware. Advanced fault-handling models are described and methods of acquiring and measuring parameters for these models are delineated.

Reliability and validity of Champion's Health Belief Model Scale for breast cancer screening among Malaysian women.

PubMed

Parsa, P; Kandiah, M; Mohd Nasir, M T; Hejar, A R; Nor Afiah, M Z

2008-11-01

Breast cancer is the leading cause of cancer deaths in Malaysian women, and the use of breast self-examination (BSE), clinical breast examination (CBE) and mammography remain low in Malaysia. Therefore, there is a need to develop a valid and reliable tool to measure the beliefs that influence breast cancer screening practices. The Champion's Health Belief Model Scale (CHBMS) is a valid and reliable tool to measure beliefs about breast cancer and screening methods in the Western culture. The purpose of this study was to translate the use of CHBMS into the Malaysian context and validate the scale among Malaysian women. A random sample of 425 women teachers was taken from 24 secondary schools in Selangor state, Malaysia. The CHBMS was translated into the Malay language, validated by an expert's panel, back translated, and pretested. Analyses included descriptive statistics of all the study variables, reliability estimates, and construct validity using factor analysis. The mean age of the respondents was 37.2 (standard deviation 7.1) years. Factor analysis yielded ten factors for BSE with eigenvalue greater than 1 (four factors more than the original): confidence 1 (ability to differentiate normal and abnormal changes in the breasts), barriers to BSE, susceptibility for breast cancer, benefits of BSE, health motivation 1 (general health), seriousness 1 (fear of breast cancer), confidence 2 (ability to detect size of lumps), seriousness 2 (fear of long-term effects of breast cancer), health motivation 2 (preventive health practice), and confidence 3 (ability to perform BSE correctly). For CBE and mammography scales, seven factors each were identified. Factors for CBE scale include susceptibility, health motivation 1, benefits of CBE, seriousness 1, barriers of CBE, seriousness 2 and health motivation 2. For mammography the scale includes benefits of mammography, susceptibility, health motivation 1, seriousness 1, barriers to mammography seriousness 2 and health

Reliability and validity of a scale to measure consumer attitudes regarding the private food safety certification of restaurants.

PubMed

Uggioni, Paula Lazzarin; Salay, Elisabete

2012-04-01

Validated and reliable instruments for measuring consumer attitudes regarding food quality certifications are lacking, but the measurement of consumer attitude could be an important tool for understanding consumer behavior. Thus the objective of this study was to develop an instrument for measuring consumer attitudes regarding private food safety certifications for commercial restaurants. To this end, the following steps were carried out: development of the interview items; complete pilot testing; item analyses (influence of social desirability and total-item correlation); reliability test (internal consistency and test-retest); and validity assessment (content and discriminative validity and exploratory and confirmatory factor analysis). The subjects, all over the age of 18 and drawn from six non-probabilistic samples (n=7-350) in the city of Campinas, Brazil, were all subjected to an interview. The final scale included 24 items and had a Cronbach's alpha coefficient of 0.79 and a content validation coefficient of 0.99, both within acceptable limits. The confirmatory factor analysis validated a model with five factors and the final instrument discriminated reasonably well between the groups and showed satisfactory reproducibility (r=0.955). Furthermore, the scale validity and reliability were satisfactory, suggesting it could also be applied to future studies. Copyright © 2011 Elsevier Ltd. All rights reserved.

How Many Sleep Diary Entries Are Needed to Reliably Estimate Adolescent Sleep?

PubMed

Short, Michelle A; Arora, Teresa; Gradisar, Michael; Taheri, Shahrad; Carskadon, Mary A

2017-03-01

To investigate (1) how many nights of sleep diary entries are required for reliable estimates of five sleep-related outcomes (bedtime, wake time, sleep onset latency [SOL], sleep duration, and wake after sleep onset [WASO]) and (2) the test-retest reliability of sleep diary estimates of school night sleep across 12 weeks. Data were drawn from four adolescent samples (Australia [n = 385], Qatar [n = 245], United Kingdom [n = 770], and United States [n = 366]), who provided 1766 eligible sleep diary weeks for reliability analyses. We performed reliability analyses for each cohort using complete data (7 days), one to five school nights, and one to two weekend nights. We also performed test-retest reliability analyses on 12-week sleep diary data available from a subgroup of 55 US adolescents. Intraclass correlation coefficients for bedtime, SOL, and sleep duration indicated good-to-excellent reliability from five weekday nights of sleep diary entries across all adolescent cohorts. Four school nights was sufficient for wake times in the Australian and UK samples, but not the US or Qatari samples. Only Australian adolescents showed good reliability for two weekend nights of bedtime reports; estimates of SOL were adequate for UK adolescents based on two weekend nights. WASO was not reliably estimated using 1 week of sleep diaries. We observed excellent test-rest reliability across 12 weeks of sleep diary data in a subsample of US adolescents. We recommend at least five weekday nights of sleep dairy entries to be made when studying adolescent bedtimes, SOL, and sleep duration. Adolescent sleep patterns were stable across 12 consecutive school weeks. © Sleep Research Society 2017. Published by Oxford University Press on behalf of the Sleep Research Society. All rights reserved. For permissions, please e-mail journals.permissions@oup.com.

Design Strategy for a Formally Verified Reliable Computing Platform

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Caldwell, James L.; DiVito, Ben L.

1991-01-01

This paper presents a high-level design for a reliable computing platform for real-time control applications. The design tradeoffs and analyses related to the development of a formally verified reliable computing platform are discussed. The design strategy advocated in this paper requires the use of techniques that can be completely characterized mathematically as opposed to more powerful or more flexible algorithms whose performance properties can only be analyzed by simulation and testing. The need for accurate reliability models that can be related to the behavior models is also stressed. Tradeoffs between reliability and voting complexity are explored. In particular, the transient recovery properties of the system are found to be fundamental to both the reliability analysis as well as the "correctness" models.

The hospital anxiety and depression scale--dimensionality, reliability and construct validity among cognitively intact nursing home patients.

PubMed

Haugan, Gørill; Drageset, Jorunn

2014-08-01

Depression and anxiety are particularly common among individuals living in long-term care facilities. Therefore, access to a valid and reliable measure of anxiety and depression among nursing home patients is highly warranted. To investigate the dimensionality, reliability and construct validity of the Hospital Anxiety and Depression scale (HADS) in a cognitively intact nursing home population. Cross-sectional data were collected from two samples; 429 cognitively intact nursing home patients participated, representing 74 different Norwegian nursing homes. Confirmative factor analyses and correlations with selected constructs were used. The two-factor model provided a good fit in Sample1, revealing a poorer fit in Sample2. Good-acceptable measurement reliability was demonstrated, and construct validity was supported. Using listwise deletion the sample sizes were 227 and 187, for Sample1 and Sample2, respectively. Greater sample sizes would have strengthen the statistical power in the tests. The researchers visited the participants to help fill in the questionnaires; this might have introduced some bias into the respondents׳ reporting. The 14 HADS items were part of greater questionnaires. Thus, frail, older NH patients might have tired during the interview causing a possible bias. Low reliability for depression was disclosed, mainly resulting from three items appearing to be inappropriate indicators for depression in this population. Further research is needed exploring which items might perform as more reliably indicators for depression among nursing home patients. Copyright © 2014 Elsevier B.V. All rights reserved.

Initial development and reliability of a motivation for weight loss scale.

PubMed

Meyer, Andrea H; Weissen-Schelling, Simone; Munsch, Simone; Margraf, Jürgen

2010-06-01

We aimed at developing and evaluating a questionnaire assessing health and appearance as the two main reasons for weight loss in overweight and obese individuals. Using data from two representative telephone surveys in Switzerland, the factorial structure of this questionnaire was analyzed by exploratory and confirmatory factor analysis. The model obtained was cross-validated with data from a second representative Swiss survey and multigroup analyses according to sex, age, BMI and regional language subgroups were performed. This lead to a 24-item, 3-factor solution, with factors labeled 'health', 'appearance in relation to others', and 'appearance in relation to oneself'. Internal consistency and test-retest reliability were good. To the best of our knowledge, this is the first validated questionnaire assessing overweight and obese individuals' reasons for weight loss. It should be further tested whether using this questionnaire as a pretreatment assessment device will help in tailoring treatments to individuals, thereby increasing treatment adherence and success. Copyright (c) 2010 S. Karger AG, Basel.

Reliability of abstracting performance measures: results of the cardiac rehabilitation referral and reliability (CR3) project.

PubMed

Thomas, Randal J; Chiu, Jensen S; Goff, David C; King, Marjorie; Lahr, Brian; Lichtman, Steven W; Lui, Karen; Pack, Quinn R; Shahriary, Melanie

2014-01-01

Assessment of the reliability of performance measure (PM) abstraction is an important step in PM validation. Reliability has not been previously assessed for abstracting PMs for the referral of patients to cardiac rehabilitation (CR) and secondary prevention (SP) programs. To help validate these PMs, we carried out a multicenter assessment of their reliability. Hospitals and clinical practices from around the United States were invited to participate in the Cardiac Rehabilitation Referral Reliability (CR3) Project. Twenty-nine hospitals and 23 outpatient centers expressed interest in participating. Seven hospitals and 6 outpatient centers met participation criteria and submitted completed data. Site coordinators identified 35 patients whose charts were reviewed by 2 site abstractors twice, 1 week apart. Percent agreement and the Cohen κ statistic were used to describe intra- and interabstractor reliability for patient eligibility for CR/SP, patient exceptions for CR/SP referral, and documented referral to CR/SP. Results were obtained from within-site data, as well as from pooled data of all inpatient and all outpatient sites. We found that intra-abstractor reliability reflected excellent repeatability (≥ 90% agreement; κ ≥ 0.75) for ratings of CR/SP eligibility, exceptions, and referral, both from pooled and site-specific analyses of inpatient and outpatient data. Similarly, the interabstractor agreement from pooled analysis ranged from good to excellent for the 3 items, although with slightly lower measures of reliability. Abstraction of PMs for CR/SP referral has high reliability, supporting the use of these PMs in quality improvement initiatives aimed at increasing CR/SP delivery to patients with cardiovascular disease.

Reliability of the NEO Five Factor Inventory short form for assessing personality after stroke.

PubMed

Dwan, Toni; Ownsworth, Tamara; Donovan, Caroline; Lo, Ada Ho Yan

2017-07-01

It is well recognized that an individual's personality characteristics influence their psychological adjustment after stroke. However, there is a lack of research on the reliability of personality inventories for stroke. This study primarily aimed to evaluate the reliability of the Neuroticism, Extroversion, Openness to Experience (NEO)-Five Factor Inventory (NEO-FFI) for assessing pre-morbid personality and personality changes after stroke. Further aims were to investigate changes in personality during the hospital-to-home transition period and examine associations between personality and mood. Forty participants with stroke (52.5% male, M age=65.55 years) were recruited at time of hospital discharge and completed the NEO-FFI, Centre for Epidemiologic Studies - Depression and Geriatric Anxiety Inventory. Significant others completed an informant version of the NEO-FFI. Stroke participants were re-assessed on the NEO-FFI at 1-month and 4-months post-discharge. Forty matched controls also completed the NEO-FFI. Internal consistency was adequate for the NEO-FFI (α=0.57-0.86), although low for agreeableness. There was fair to excellent concordance between self-rated and informant versions of the NEO-FFI (ICC=0.58-0.78). Significant positive associations were found between neuroticism and mood (r=0.50-0.68), and significant negative associations were found between extraversion and mood (r=-0.33-0.36) and agreeableness and anxiety (r=-0.43). Self-ratings of stroke participants on the NEO-FFI at discharge did not significantly differ from matched controls. Extraversion levels significantly decreased, and agreeableness levels significantly increased between discharge and 1- and 4-months post-discharge. Overall, the results support the reliability of the NEO-FFI for assessing personality characteristics in the context of stroke.

Reliability and validity of the Korean version of organizational justice questionnaire.

PubMed

Park, Hanul; Lee, Kang-Sook; Park, Yong-Jun; Lee, Dong-Joon; Lee, Hyun-Kyung

2018-01-01

Many studies show that organizational justice (OJ) is related to psychological determinants of employee health. To prevent health problems related to OJ in Korean workplaces and to accurately measure OJ, we developed the Korean version of the Organizational Justice Questionnaire (K-OJQ) and assessed its validity and reliability. A questionnaire draft of the K-OJQ was developed using back-translation methods, which was preliminary tested by 32 employees in Korea. Feedback was received and the K-OJQ was finalized. This study used data from 303 workers (172 males, 131 females) in Korea using the K-OJQ, job stress, and lifestyle questionnaires. Cronbach's α coefficients of the internal consistency reliability was 0.92 for procedural justice and 0.94 for interactional justice. Factor analyses using SPSS 24 and Amos 23 extracted two expected factors, named procedural justice (7 items; range, 1.0-5.0) and interactional justice (6 items; range, 1.0-5.0) and showed a reliable fit (χ 2  = 182; p  = .000; GFI = .912; AGFI = .877; CFI = .965; RMSEA = .077). Furthermore, higher procedural justice and interactional justice levels were correlated with lower job demand (- 0.33; - 0.36), insufficient job control (- 0.36; - 0.41), interpersonal conflict (- 0.45; - 0.51), job insecurity (- 0.33; - 0.34), organizational system (- 0.64; - 0.64), and lack of reward (- 0.55; - 0.63). The K-OJQ was objectively validated through statistical methods.

Factors that Affect Operational Reliability of Turbojet Engines

NASA Technical Reports Server (NTRS)

1956-01-01

The problem of improving operational reliability of turbojet engines is studied in a series of papers. Failure statistics for this engine are presented, the theory and experimental evidence on how engine failures occur are described, and the methods available for avoiding failure in operation are discussed. The individual papers of the series are Objectives, Failure Statistics, Foreign-Object Damage, Compressor Blades, Combustor Assembly, Nozzle Diaphrams, Turbine Buckets, Turbine Disks, Rolling Contact Bearings, Engine Fuel Controls, and Summary Discussion.

Cloud-based bioinformatics workflow platform for large-scale next-generation sequencing analyses

PubMed Central

Liu, Bo; Madduri, Ravi K; Sotomayor, Borja; Chard, Kyle; Lacinski, Lukasz; Dave, Utpal J; Li, Jianqiang; Liu, Chunchen; Foster, Ian T

2014-01-01

Due to the upcoming data deluge of genome data, the need for storing and processing large-scale genome data, easy access to biomedical analyses tools, efficient data sharing and retrieval has presented significant challenges. The variability in data volume results in variable computing and storage requirements, therefore biomedical researchers are pursuing more reliable, dynamic and convenient methods for conducting sequencing analyses. This paper proposes a Cloud-based bioinformatics workflow platform for large-scale next-generation sequencing analyses, which enables reliable and highly scalable execution of sequencing analyses workflows in a fully automated manner. Our platform extends the existing Galaxy workflow system by adding data management capabilities for transferring large quantities of data efficiently and reliably (via Globus Transfer), domain-specific analyses tools preconfigured for immediate use by researchers (via user-specific tools integration), automatic deployment on Cloud for on-demand resource allocation and pay-as-you-go pricing (via Globus Provision), a Cloud provisioning tool for auto-scaling (via HTCondor scheduler), and the support for validating the correctness of workflows (via semantic verification tools). Two bioinformatics workflow use cases as well as performance evaluation are presented to validate the feasibility of the proposed approach. PMID:24462600

Traditional neuropsychological correlates and reliability of the automated neuropsychological assessment metrics-4 battery for Parkinson's disease.

PubMed

Hawkins, Keith A; Jennings, Danna; Vincent, Andrea S; Gilliland, Kirby; West, Adrienne; Marek, Kenneth

2012-08-01

The automated neuropsychological assessment metrics battery-4 for PD offers the promise of a computerized approach to cognitive assessment. To assess its utility, the ANAM4-PD was administered to 72 PD patients and 24 controls along with a traditional battery. Reliability was assessed by retesting 26 patients. The cognitive efficiency score (CES; a global score) exhibited high reliability (r = 0.86). Constituent variables exhibited lower reliability. The CES correlated strongly with the traditional battery global score, but displayed weaker relationships to UPDRS scores than the traditional score. Multivariate analysis of variance revealed a significant difference between the patient and control groups in ANAM4-PD performance, with three ANAM4-PD tests, math, tower, and pursuit tracking, displaying sizeable differences. In discriminant analyses these variables were as effective as the total ANAM4-PD in classifying cases designated as impaired based on traditional variables. Principal components analyses uncovered fewer factors in the ANAM4-PD relative to the traditional battery. ANAM4-PD variables correlated at higher levels with traditional motor and processing speed variables than with untimed executive, intellectual or memory variables. The ANAM4-PD displays high global reliability, but variable subtest reliability. The battery assesses a narrower range of cognitive functions than traditional tests, and discriminates between patients and controls less effectively. Three ANAM4-PD tests, pursuit tracking, math, and tower performed as well as the total ANAM4-PD in classifying patients as cognitively impaired. These findings could guide the refinement of the ANAM4-PD as an efficient method of screening for mild to moderate cognitive deficits in PD patients. Copyright © 2012 Elsevier Ltd. All rights reserved.

Inter-rater reliability for movement pattern analysis (MPA): measuring patterning of behaviors versus discrete behavior counts as indicators of decision-making style.

PubMed

Connors, Brenda L; Rende, Richard; Colton, Timothy J

2014-01-01

The unique yield of collecting observational data on human movement has received increasing attention in a number of domains, including the study of decision-making style. As such, interest has grown in the nuances of core methodological issues, including the best ways of assessing inter-rater reliability. In this paper we focus on one key topic - the distinction between establishing reliability for the patterning of behaviors as opposed to the computation of raw counts - and suggest that reliability for each be compared empirically rather than determined a priori. We illustrate by assessing inter-rater reliability for key outcome measures derived from movement pattern analysis (MPA), an observational methodology that records body movements as indicators of decision-making style with demonstrated predictive validity. While reliability ranged from moderate to good for raw counts of behaviors reflecting each of two Overall Factors generated within MPA (Assertion and Perspective), inter-rater reliability for patterning (proportional indicators of each factor) was significantly higher and excellent (ICC = 0.89). Furthermore, patterning, as compared to raw counts, provided better prediction of observable decision-making process assessed in the laboratory. These analyses support the utility of using an empirical approach to inform the consideration of measuring patterning versus discrete behavioral counts of behaviors when determining inter-rater reliability of observable behavior. They also speak to the substantial reliability that may be achieved via application of theoretically grounded observational systems such as MPA that reveal thinking and action motivations via visible movement patterns.

Reliability analysis of structural ceramics subjected to biaxial flexure

NASA Technical Reports Server (NTRS)

Chao, Luen-Yuan; Shetty, Dinesh K.

1991-01-01

The reliability of alumina disks subjected to biaxial flexure is predicted on the basis of statistical fracture theory using a critical strain energy release rate fracture criterion. Results on a sintered silicon nitride are consistent with reliability predictions based on pore-initiated penny-shaped cracks with preferred orientation normal to the maximum principal stress. Assumptions with regard to flaw types and their orientations in each ceramic can be justified by fractography. It is shown that there are no universal guidelines for selecting fracture criteria or assuming flaw orientations in reliability analyses.

Psychosocial factors at work and self reported health: comparative results of cross sectional and prospective analyses of the French GAZEL cohort

PubMed Central

Niedhammer, I; Chea, M

2003-01-01

Background: Psychosocial factors at work have been found to be significant contributors to health, especially cardiovascular health. Aims: To explore the relation between psychosocial factors at work and self reported health, using cross sectional and prospective analyses for a large occupational cohort of men and women. Methods: Psychosocial factors at work were evaluated using the Karasek questionnaire, designed to measure psychological demands, decision latitude, social support, and physical demands. Self reported health was used as health outcome. Covariates included chronic diseases, and sociodemographic, occupational, and behavioural factors. The cross sectional and prospective analyses concerned respectively 11 447 and 7664 workers. Men and women were analysed separately. Results: Cross sectional analysis revealed significant associations between psychological demands, decision latitude, social support, and physical demands, and self reported health for both men and women. Prospective analysis showed that high psychological demands for both genders, low decision authority for men, and low social support and high physical demands for women were predictive of poor self reported health. These results were independent of potential confounding variables. Conclusions: Results highlight the predictive effects of psychosocial factors at work on self reported health in a one year follow up study. They also underline the need for longitudinal study design and separate analyses for men and women in the field of psychosocial factors at work. PMID:12819285

Measurement Structure of the Trait Hope Scale in Persons with Spinal Cord Injury: A Confirmatory Factor Analysis

ERIC Educational Resources Information Center

Smedema, Susan Miller; Pfaller, Joseph; Moser, Erin; Tu, Wei-Mo; Chan, Fong

2013-01-01

Objective: To evaluate the measurement structure of the Trait Hope Scale (THS) among individuals with spinal cord injury. Design: Confirmatory factor analysis and reliability and validity analyses were performed. Participants: 242 individuals with spinal cord injury. Results: Results support the two-factor measurement model for the THS with agency…

Investigation of low glass transition temperature on COTS PEMs reliability

NASA Technical Reports Server (NTRS)

Sandor, M.; Agarwal, S.

2002-01-01

Many factors influence PEM component reliability.One of the factors that can affect PEM performance and reliability is the glass transition temperature (Tg) and the coefficient of thermal expansion (CTE) of the encapsulant or underfill. JPL/NASA is investigating how the Tg and CTE for PEMs affect device reliability under different temperature and aging conditions. Other issues with Tg are also being investigated. Some preliminary data will be presented on glass transition temperature test results conducted at JPL.

Addressing Uniqueness and Unison of Reliability and Safety for a Better Integration

NASA Technical Reports Server (NTRS)

Huang, Zhaofeng; Safie, Fayssal

2016-01-01

Over time, it has been observed that Safety and Reliability have not been clearly differentiated, which leads to confusion, inefficiency, and, sometimes, counter-productive practices in executing each of these two disciplines. It is imperative to address this situation to help Reliability and Safety disciplines improve their effectiveness and efficiency. The paper poses an important question to address, "Safety and Reliability - Are they unique or unisonous?" To answer the question, the paper reviewed several most commonly used analyses from each of the disciplines, namely, FMEA, reliability allocation and prediction, reliability design involvement, system safety hazard analysis, Fault Tree Analysis, and Probabilistic Risk Assessment. The paper pointed out uniqueness and unison of Safety and Reliability in their respective roles, requirements, approaches, and tools, and presented some suggestions for enhancing and improving the individual disciplines, as well as promoting the integration of the two. The paper concludes that Safety and Reliability are unique, but compensating each other in many aspects, and need to be integrated. Particularly, the individual roles of Safety and Reliability need to be differentiated, that is, Safety is to ensure and assure the product meets safety requirements, goals, or desires, and Reliability is to ensure and assure maximum achievability of intended design functions. With the integration of Safety and Reliability, personnel can be shared, tools and analyses have to be integrated, and skill sets can be possessed by the same person with the purpose of providing the best value to a product development.

Multisite Reliability of Cognitive BOLD Data

PubMed Central

Brown, Gregory G.; Mathalon, Daniel H.; Stern, Hal; Ford, Judith; Mueller, Bryon; Greve, Douglas N.; McCarthy, Gregory; Voyvodic, Jim; Glover, Gary; Diaz, Michele; Yetter, Elizabeth; Burak Ozyurt, I.; Jorgensen, Kasper W.; Wible, Cynthia G.; Turner, Jessica A.; Thompson, Wesley K.; Potkin, Steven G.

2010-01-01

Investigators perform multi-site functional magnetic resonance imaging studies to increase statistical power, to enhance generalizability, and to improve the likelihood of sampling relevant subgroups. Yet undesired site variation in imaging methods could off-set these potential advantages. We used variance components analysis to investigate sources of variation in the blood oxygen level dependent (BOLD) signal across four 3T magnets in voxelwise and region of interest (ROI) analyses. Eighteen participants traveled to four magnet sites to complete eight runs of a working memory task involving emotional or neutral distraction. Person variance was more than 10 times larger than site variance for five of six ROIs studied. Person-by-site interactions, however, contributed sizable unwanted variance to the total. Averaging over runs increased between-site reliability, with many voxels showing good to excellent between-site reliability when eight runs were averaged and regions of interest showing fair to good reliability. Between-site reliability depended on the specific functional contrast analyzed in addition to the number of runs averaged. Although median effect size was correlated with between-site reliability, dissociations were observed for many voxels. Brain regions where the pooled effect size was large but between-site reliability was poor were associated with reduced individual differences. Brain regions where the pooled effect size was small but between-site reliability was excellent were associated with a balance of participants who displayed consistently positive or consistently negative BOLD responses. Although between-site reliability of BOLD data can be good to excellent, acquiring highly reliable data requires robust activation paradigms, ongoing quality assurance, and careful experimental control. PMID:20932915

[The analytical reliability of clinical laboratory information and role of the standards in its support].

PubMed

Men'shikov, V V

2012-12-01

The article deals with the factors impacting the reliability of clinical laboratory information. The differences of qualities of laboratory analysis tools produced by various manufacturers are discussed. These characteristics are the causes of discrepancy of the results of laboratory analyses of the same analite. The role of the reference system in supporting the comparability of laboratory analysis results is demonstrated. The project of national standard is presented to regulate the requirements to standards and calibrators for analysis of qualitative and non-metrical characteristics of components of biomaterials.

Analyses of mode filling factor of a laser end-pumped by a LD with high-order transverse modes

NASA Astrophysics Data System (ADS)

Han, Juhong; Wang, You; An, Guofei; Rong, Kepeng; Yu, Hang; Wang, Shunyan; Zhang, Wei; Cai, He; Xue, Liangping; Wang, Hongyuan; Zhou, Jie

2017-05-01

Although the concept of the mode filling factor (also named as "mode-matching efficiency") has been well discussed decades before, the concept of so-called overlap coefficient is often confused by the laser technicians because there are several different formulae for various engineering purposes. Furthermore, the LD-pumped configurations have become the mainstream of solid-state lasers since their compact size, high optical-to-optical efficiency, low heat generation, etc. As the beam quality of LDs are usually very unsatisfactory, it is necessary to investigate how the mode filling factor of a laser system is affected by a high-powered LD pump source. In this paper, theoretical analyses of an end-pumped laser are carried out based on the normalized overlap coefficient formalism. The study provides a convenient tool to describe the intrinsically complex issue of mode interaction corresponding to a laser and an end-pumped source. The mode filling factor has been studied for many cases in which the pump mode and the laser mode have been considered together in the calculation based on analyses of the rate equations. The results should be applied for analyses of any other types of lasers with the similar optical geometry.

Five Describing Factors of Dyslexia.

PubMed

Tamboer, Peter; Vorst, Harrie C M; Oort, Frans J

2016-09-01

Two subtypes of dyslexia (phonological, visual) have been under debate in various studies. However, the number of symptoms of dyslexia described in the literature exceeds the number of subtypes, and underlying relations remain unclear. We investigated underlying cognitive features of dyslexia with exploratory and confirmatory factor analyses. A sample of 446 students (63 with dyslexia) completed a large test battery and a large questionnaire. Five factors were found in both the test battery and the questionnaire. These 10 factors loaded on 5 latent factors (spelling, phonology, short-term memory, rhyme/confusion, and whole-word processing/complexity), which explained 60% of total variance. Three analyses supported the validity of these factors. A confirmatory factor analysis fit with a solution of five factors (RMSEA = .03). Those with dyslexia differed from those without dyslexia on all factors. A combination of five factors provided reliable predictions of dyslexia and nondyslexia (accuracy >90%). We also looked for factorial deficits on an individual level to construct subtypes of dyslexia, but found varying profiles. We concluded that a multiple cognitive deficit model of dyslexia is supported, whereas the existence of subtypes remains unclear. We discussed the results in relation to advanced compensation strategies of students, measures of intelligence, and various correlations within groups of those with and without dyslexia. © Hammill Institute on Disabilities 2014.

Improving the Factor Structure of Psychological Scales

PubMed Central

Zhang, Xijuan; Savalei, Victoria

2015-01-01

Many psychological scales written in the Likert format include reverse worded (RW) items in order to control acquiescence bias. However, studies have shown that RW items often contaminate the factor structure of the scale by creating one or more method factors. The present study examines an alternative scale format, called the Expanded format, which replaces each response option in the Likert scale with a full sentence. We hypothesized that this format would result in a cleaner factor structure as compared with the Likert format. We tested this hypothesis on three popular psychological scales: the Rosenberg Self-Esteem scale, the Conscientiousness subscale of the Big Five Inventory, and the Beck Depression Inventory II. Scales in both formats showed comparable reliabilities. However, scales in the Expanded format had better (i.e., lower and more theoretically defensible) dimensionalities than scales in the Likert format, as assessed by both exploratory factor analyses and confirmatory factor analyses. We encourage further study and wider use of the Expanded format, particularly when a scale’s dimensionality is of theoretical interest. PMID:27182074

Making the Transition from Diagnosis to Treatment-Planning: Validity, Reliability and Factor Structure of the Autism Spectrum Disorder Behaviour Checklist

ERIC Educational Resources Information Center

Bitsika, Vicki; Sharpley, Christopher F.

2018-01-01

The validity, reliability and factor structure of the Autism Spectrum Disorder Behaviour Checklist-Revised (ASDBC-R) were measured in a sample of 140 boys with Autism Spectrum Disorder (ASD) aged between 6 and 18 years. Internal consistency (Cronbach's alpha) was satisfactory and the ASDBC-R significantly correlated with the Social Responsiveness…

Cross-cultural adaptation, content validation, and reliability of the Nigerian Composite Lifestyle CVD Risk Factors Questionnaire for adolescents among Yoruba rural adolescents in Nigeria.

PubMed

Odunaiya, Nse A; Louw, Quinette A; Grimmer, Karen

2017-06-01

Assessment of lifestyle risk factors must be culturally- and contextually relevant and available in local languages. This paper reports on a study which aimed to cross culturally adapt a composite lifestyle cardiovascular disease (CVD) risk factors questionnaire into an African language (Yoruba) and testing some of its psychometric properties such as content validity and test retest reliability in comparison to the original English version. This study utilized a cross sectional design. Translation of the English version of the questionnaire into Yoruba was undertaken using the guideline by Beaton et al. The translated instrument was presented to 21 rural adolescents to assess comprehensibility and clarity using a sample of convenience. A test retest reliability was conducted among 150 rural adolescents using a purposive sampling. Data was analyzed using intraclass correlation (ICC ) model 3, Cohen kappa statistics and prevalence rates. ICC ranged between 0.4-0.8. The Yoruba version was completed 15-20 minutes and was reported to be culturally appropriate and acceptable for rural Nigerian adolescents. The Yoruba translation of the Nigerian composite lifestyle risk factors questionnaire performs at least as well as the original English version in terms of content validity and reliability. It took a shorter time to complete therefore may be more relevant to rural adolescents.

An Integrated Approach to Establish Validity and Reliability of Reading Tests

ERIC Educational Resources Information Center

Razi, Salim

2012-01-01

This study presents the processes of developing and establishing reliability and validity of a reading test by administering an integrative approach as conventional reliability and validity measures superficially reveals the difficulty of a reading test. In this respect, analysing vocabulary frequency of the test is regarded as a more eligible way…

A Confirmatory Factor Analysis of the Structure of Abbreviated Math Anxiety Scale

PubMed Central

Farrokhi, Farahman

2011-01-01

Objective The aim of this study is to explore the confirmatory factor analysis results of the Persian adaptation of Abbreviated Math Anxiety Scale (AMAS), proposed by Hopko, Mahadevan, Bare & Hunt. Method The validity and reliability assessments of the scale were performed on 298 college students chosen randomly from Tabriz University in Iran. The confirmatory factor analysis (CFA) was carried out to determine the factor structures of the Persian version of AMAS. Results As expected, the two-factor solution provided a better fit to the data than a single factor. Moreover, multi-group analyses showed that this two-factor structure was invariant across sex. Hence, AMAS provides an equally valid measure for use among college students. Conclusions Brief AMAS demonstrates adequate reliability and validity. The AMAS scores can be used to compare symptoms of math anxiety between male and female students. The study both expands and adds support to the existing body of math anxiety literature. PMID:22952521

Development of the Human Factors Skills for Healthcare Instrument: a valid and reliable tool for assessing interprofessional learning across healthcare practice settings.

PubMed

Reedy, Gabriel B; Lavelle, Mary; Simpson, Thomas; Anderson, Janet E

2017-10-01

A central feature of clinical simulation training is human factors skills, providing staff with the social and cognitive skills to cope with demanding clinical situations. Although these skills are critical to safe patient care, assessing their learning is challenging. This study aimed to develop, pilot and evaluate a valid and reliable structured instrument to assess human factors skills, which can be used pre- and post-simulation training, and is relevant across a range of healthcare professions. Through consultation with a multi-professional expert group, we developed and piloted a 39-item survey with 272 healthcare professionals attending training courses across two large simulation centres in London, one specialising in acute care and one in mental health, both serving healthcare professionals working across acute and community settings. Following psychometric evaluation, the final 12-item instrument was evaluated with a second sample of 711 trainees. Exploratory factor analysis revealed a 12-item, one-factor solution with good internal consistency (α=0.92). The instrument had discriminant validity, with newly qualified trainees scoring significantly lower than experienced trainees ( t (98)=4.88, p<0.001) and was sensitive to change following training in acute and mental health settings, across professional groups (p<0.001). Confirmatory factor analysis revealed an adequate model fit (RMSEA=0.066). The Human Factors Skills for Healthcare Instrument provides a reliable and valid method of assessing trainees' human factors skills self-efficacy across acute and mental health settings. This instrument has the potential to improve the assessment and evaluation of human factors skills learning in both uniprofessional and interprofessional clinical simulation training.

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 5. Technical Report #1204

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Irvin, P. Shawn; Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the fifth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 2. Technical Report #1201

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Irvin, P. Shawn; Alonzo, Julie; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the second-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 4. Technical Report #1203

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Irvin, P. Shawn; Alonzo, Julie; Lai, Cheng-Fei; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the fourth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 6. Technical Report #1205

ERIC Educational Resources Information Center

Irvin, P. Shawn; Alonzo, Julie; Park, Bitnara Jasmine; Lai, Cheng-Fei; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the sixth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 7. Technical Report #1206

ERIC Educational Resources Information Center

Irvin, P. Shawn; Alonzo, Julie; Lai, Cheng-Fei; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the seventh-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 3. Technical Report #1202

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Irvin, P. Shawn; Park, Bitnara Jasmine; Alonzo, Julie; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the third-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Competing risk models in reliability systems, a weibull distribution model with bayesian analysis approach

NASA Astrophysics Data System (ADS)

Iskandar, Ismed; Satria Gondokaryono, Yudi

2016-02-01

In reliability theory, the most important problem is to determine the reliability of a complex system from the reliability of its components. The weakness of most reliability theories is that the systems are described and explained as simply functioning or failed. In many real situations, the failures may be from many causes depending upon the age and the environment of the system and its components. Another problem in reliability theory is one of estimating the parameters of the assumed failure models. The estimation may be based on data collected over censored or uncensored life tests. In many reliability problems, the failure data are simply quantitatively inadequate, especially in engineering design and maintenance system. The Bayesian analyses are more beneficial than the classical one in such cases. The Bayesian estimation analyses allow us to combine past knowledge or experience in the form of an apriori distribution with life test data to make inferences of the parameter of interest. In this paper, we have investigated the application of the Bayesian estimation analyses to competing risk systems. The cases are limited to the models with independent causes of failure by using the Weibull distribution as our model. A simulation is conducted for this distribution with the objectives of verifying the models and the estimators and investigating the performance of the estimators for varying sample size. The simulation data are analyzed by using Bayesian and the maximum likelihood analyses. The simulation results show that the change of the true of parameter relatively to another will change the value of standard deviation in an opposite direction. For a perfect information on the prior distribution, the estimation methods of the Bayesian analyses are better than those of the maximum likelihood. The sensitivity analyses show some amount of sensitivity over the shifts of the prior locations. They also show the robustness of the Bayesian analysis within the range

Reliability of the Suicide Opinion Questionnaire.

ERIC Educational Resources Information Center

Rogers, James R.; DeShon, Richard P.

The lack of systematic psychometric information on the Suicide Opinion Questionnaire (SOQ) was addressed by investigating the factor structure and reliability of the eight-factor clinical scale model (mental illness, cry for help, right to die, religion, impulsivity, normality, aggression, and moral evil), developed for interpreting responses to…

The alcohol use disorder and associated disabilities interview schedule-IV (AUDADIS-IV): reliability of new psychiatric diagnostic modules and risk factors in a general population sample.

PubMed

Ruan, W June; Goldstein, Risë B; Chou, S Patricia; Smith, Sharon M; Saha, Tulshi D; Pickering, Roger P; Dawson, Deborah A; Huang, Boji; Stinson, Frederick S; Grant, Bridget F

2008-01-01

This study presents test-retest reliability statistics and information on internal consistency for new diagnostic modules and risk factors for alcohol, drug, and psychiatric disorders from the Alcohol Use Disorder and Associated Disabilities Interview Schedule-IV (AUDADIS-IV). Test-retest statistics were derived from a random sample of 1899 adults selected from 34,653 respondents who participated in the 2004-2005 Wave 2 National Epidemiologic Survey on Alcohol and Related Conditions (NESARC). Internal consistency of continuous scales was assessed using the entire Wave 2 NESARC. Both test and retest interviews were conducted face-to-face. Test-retest and internal consistency results for diagnoses and symptom scales associated with posttraumatic stress disorder, attention-deficit/hyperactivity disorder, and borderline, narcissistic, and schizotypal personality disorders were predominantly good (kappa>0.63; ICC>0.69; alpha>0.75) and reliability for risk factor measures fell within the good to excellent range (intraclass correlations=0.50-0.94; alpha=0.64-0.90). The high degree of reliability found in this study suggests that new AUDADIS-IV diagnostic measures can be useful tools in research settings. The availability of highly reliable measures of risk factors for alcohol, drug, and psychiatric disorders will contribute to the validity of conclusions drawn from future research in the domains of substance use disorder and psychiatric epidemiology.

The Alcohol Use Disorder and Associated Disabilities Interview Schedule-IV (AUDADIS-IV): Reliability of New Psychiatric Diagnostic Modules and Risk Factors in a General Population Sample

PubMed Central

Ruan, W. June; Goldstein, Risë B.; Chou, S. Patricia; Smith, Sharon M.; Saha, Tulshi D.; Pickering, Roger P.; Dawson, Deborah A.; Huang, Boji; Stinson, Frederick S.; Grant, Bridget F.

2008-01-01

This study presents test-retest reliability statistics and information on internal consistency for new diagnostic modules and risk factor of alcohol, drug, and psychiatric disorders the Alcohol Use Disorder and Associated Disabilities Interview Schedule-IV (AUDADIS-IV). Test-retest statistics were derived from a random sample of 1,899 adults selected from 34,653 respondents who participated in the 2004–2005 Wave 2 National Epidemiologic Survey on Alcohol and Related Conditions (NESARC). Internal consistency of continuous scales was assessed using the entire Wave 2 NESARC. Both test and retest interviews were conducted face-to-face. Test-retest and internal consistency results for diagnoses and symptom scales associated with posttraumatic stress disorder, attention-deficit/hyperactivity disorder, and borderline, narcissistic, and schizotypal personality disorders were predominantly good (kappa > 0.63; ICC > 0.69; alpha > 0.75) and reliability for risk factor measures fell within the good to excellent range (intraclass correlations = 0.50–0.94; alpha = 0.64–0.90). The high degree of reliability found in this study suggests that new AUDADIS-IV diagnostic measures can be useful tools in research settings. The availability of highly reliable measures of risk factors of alcohol, drug, and psychiatric disorders will contribute to the validity of conclusions drawn from future research in the domains of substance use disorder and psychiatric epidemiology. PMID:17706375

Cloud-based bioinformatics workflow platform for large-scale next-generation sequencing analyses.

PubMed

Liu, Bo; Madduri, Ravi K; Sotomayor, Borja; Chard, Kyle; Lacinski, Lukasz; Dave, Utpal J; Li, Jianqiang; Liu, Chunchen; Foster, Ian T

2014-06-01

Due to the upcoming data deluge of genome data, the need for storing and processing large-scale genome data, easy access to biomedical analyses tools, efficient data sharing and retrieval has presented significant challenges. The variability in data volume results in variable computing and storage requirements, therefore biomedical researchers are pursuing more reliable, dynamic and convenient methods for conducting sequencing analyses. This paper proposes a Cloud-based bioinformatics workflow platform for large-scale next-generation sequencing analyses, which enables reliable and highly scalable execution of sequencing analyses workflows in a fully automated manner. Our platform extends the existing Galaxy workflow system by adding data management capabilities for transferring large quantities of data efficiently and reliably (via Globus Transfer), domain-specific analyses tools preconfigured for immediate use by researchers (via user-specific tools integration), automatic deployment on Cloud for on-demand resource allocation and pay-as-you-go pricing (via Globus Provision), a Cloud provisioning tool for auto-scaling (via HTCondor scheduler), and the support for validating the correctness of workflows (via semantic verification tools). Two bioinformatics workflow use cases as well as performance evaluation are presented to validate the feasibility of the proposed approach. Copyright © 2014 Elsevier Inc. All rights reserved.

Confirmatory Factor Analysis of the System for Evaluation of Teaching Qualities (SETQ) in Graduate Medical Training.

PubMed

Boerebach, Benjamin C M; Lombarts, Kiki M J M H; Arah, Onyebuchi A

2016-03-01

The System for Evaluation of Teaching Qualities (SETQ) was developed as a formative system for the continuous evaluation and development of physicians' teaching performance in graduate medical training. It has been seven years since the introduction and initial exploratory psychometric analysis of the SETQ questionnaires. This study investigates the validity and reliability of the SETQ questionnaires across hospitals and medical specialties using confirmatory factor analyses (CFAs), reliability analysis, and generalizability analysis. The SETQ questionnaires were tested in a sample of 3,025 physicians and 2,848 trainees in 46 hospitals. The CFA revealed acceptable fit of the data to the previously identified five-factor model. The high internal consistency estimates suggest satisfactory reliability of the subscales. These results provide robust evidence for the validity and reliability of the SETQ questionnaires for evaluating physicians' teaching performance. © The Author(s) 2014.

Combined bending-torsion fatigue reliability of AISI 4340 steel shafting with K sub t = 2.34. [stress concentration factor

NASA Technical Reports Server (NTRS)

Kececioglu, D.; Chester, L. B.; Dodge, T. M.

1974-01-01

Results generated by three, unique fatigue reliability research machines which can apply reversed bending loads combined with steady torque are presented. Six-inch long, AISI 4340 steel, grooved specimens with a stress concentration factor of 2.34 and R sub C 35/40 hardness were subjected to various combinations of these loads and cycled to failure. The generated cycles-to-failure and stress-to-failure data are statistically analyzed to develop distributional S-N and Goodman diagrams. Various failure theories are investigated to determine which one represents the data best. The effect of the groove and of the various combined bending-torsion loads on the S-N and Goodman diagrams are determined. Three design applications are presented. The third one illustrates the weight savings that may be achieved by designing for reliability.

Reliability and Validity of Assessing User Satisfaction With Web-Based Health Interventions.

PubMed

Boß, Leif; Lehr, Dirk; Reis, Dorota; Vis, Christiaan; Riper, Heleen; Berking, Matthias; Ebert, David Daniel

2016-08-31

The perspective of users should be taken into account in the evaluation of Web-based health interventions. Assessing the users' satisfaction with the intervention they receive could enhance the evidence for the intervention effects. Thus, there is a need for valid and reliable measures to assess satisfaction with Web-based health interventions. The objective of this study was to analyze the reliability, factorial structure, and construct validity of the Client Satisfaction Questionnaire adapted to Internet-based interventions (CSQ-I). The psychometric quality of the CSQ-I was analyzed in user samples from 2 separate randomized controlled trials evaluating Web-based health interventions, one from a depression prevention intervention (sample 1, N=174) and the other from a stress management intervention (sample 2, N=111). At first, the underlying measurement model of the CSQ-I was analyzed to determine the internal consistency. The factorial structure of the scale and the measurement invariance across groups were tested by multigroup confirmatory factor analyses. Additionally, the construct validity of the scale was examined by comparing satisfaction scores with the primary clinical outcome. Multigroup confirmatory analyses on the scale yielded a one-factorial structure with a good fit (root-mean-square error of approximation =.09, comparative fit index =.96, standardized root-mean-square residual =.05) that showed partial strong invariance across the 2 samples. The scale showed very good reliability, indicated by McDonald omegas of .95 in sample 1 and .93 in sample 2. Significant correlations with change in depressive symptoms (r=-.35, P<.001) and perceived stress (r=-.48, P<.001) demonstrated the construct validity of the scale. The proven internal consistency, factorial structure, and construct validity of the CSQ-I indicate a good overall psychometric quality of the measure to assess the user's general satisfaction with Web-based interventions for depression and

Reliability evaluation of microgrid considering incentive-based demand response

NASA Astrophysics Data System (ADS)

Huang, Ting-Cheng; Zhang, Yong-Jun

2017-07-01

Incentive-based demand response (IBDR) can guide customers to adjust their behaviour of electricity and curtail load actively. Meanwhile, distributed generation (DG) and energy storage system (ESS) can provide time for the implementation of IBDR. The paper focus on the reliability evaluation of microgrid considering IBDR. Firstly, the mechanism of IBDR and its impact on power supply reliability are analysed. Secondly, the IBDR dispatch model considering customer’s comprehensive assessment and the customer response model are developed. Thirdly, the reliability evaluation method considering IBDR based on Monte Carlo simulation is proposed. Finally, the validity of the above models and method is studied through numerical tests on modified RBTS Bus6 test system. Simulation results demonstrated that IBDR can improve the reliability of microgrid.

Factor structure of DSM-IV criteria for obsessive compulsive personality disorder in patients with binge eating disorder.

PubMed

Grilo, C M

2004-01-01

To examine the factor structure of DSM-IV criteria for obsessive compulsive personality disorder (OCPD) in patients with binge eating disorder (BED). Two hundred and eleven consecutive out-patients with axis I diagnoses of BED were reliably assessed with semi-structured diagnostic interviews. The eight criteria for the OCPD diagnosis were examined with reliability and correlational analyses. Exploratory factor analysis was performed to identify potential components. Cronbach's coefficient alpha for the OCPD criteria was 0.77. Principal components factor analysis with varimax rotation revealed a three-factor solution (rigidity, perfectionism, and miserliness), which accounted for 65% of variance. The DSM-IV criteria for OCPD showed good internal consistency. Exploratory factor analysis, however, revealed three components that may reflect distinct interpersonal, intrapersonal (cognitive), and behavioral features.

Factor Structure and Reliability of the Childhood Trauma Questionnaire and Prevalence Estimates of Trauma for Male and Female Street Youth

ERIC Educational Resources Information Center

Forde, David R.; Baron, Stephen W.; Scher, Christine D.; Stein, Murray B.

2012-01-01

This study examines the psychometric properties of the Childhood Trauma Questionnaire short form (CTQ-SF) with street youth who have run away or been expelled from their homes (N = 397). Internal reliability coefficients for the five clinical scales ranged from 0.65 to 0.95. Confirmatory Factor Analysis (CFA) was used to test the five-factor…

The Center for Epidemiologic Studies Depression Scale: Factor Validity and Reliability in a French Sample of Adolescents with Intellectual Disability

ERIC Educational Resources Information Center

Maiano, Christophe; Morin, Alexandre J. S.; Begarie, Jerome

2011-01-01

The purpose of this study was to test the factor validity and reliability of the Center for Epidemiologic Studies Depression Scale (CES-D) within a sample of adolescents with mild to moderate Intellectual Disability (ID). A total sample of 189 adolescents (121 boys and 68 girls), aged between 12 and 18 years old, with mild to moderate ID were…

Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test

DOE Data Explorer

Keller, Jonathan (ORCID:0000000177243885)

2016-12-28

The GRC uses a combined gearbox testing, modeling, and analysis approach disseminating data and results to the industry and facilitating improvement of gearbox reliability. This test data describes the tests of GRC gearbox 3 in the National Wind Technology Center dynamometer and documents any modifications to the original test plan. It serves as a guide to interpret the publicly released data sets with brief analyses to illustrate the data. TDMS viewer and Solidworks software required to view data files. The National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) was established by the U.S. Department of Energy in 2006; its key goal is to understand the root causes of premature gearbox failures and improve their reliability.

Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test

DOE Data Explorer

Keller, Jonathan; Robb, Wallen

2016-05-12

The National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) was established by the U.S. Department of Energy in 2006; its key goal is to understand the root causes of premature gearbox failures and improve their reliability. The GRC uses a combined gearbox testing, modeling, and analysis approach disseminating data and results to the industry and facilitating improvement of gearbox reliability. This test data describes the tests of GRC gearbox 2 in the National Wind Technology Center dynamometer and documents any modifications to the original test plan. It serves as a guide to interpret the publicly released data sets with brief analyses to illustrate the data. TDMS viewer and Solidworks software required to view data files.

Development, scoring, and reliability of the Microscale Audit of Pedestrian Streetscapes (MAPS)

PubMed Central

2013-01-01

Background Streetscape (microscale) features of the built environment can influence people’s perceptions of their neighborhoods’ suitability for physical activity. Many microscale audit tools have been developed, but few have published systematic scoring methods. We present the development, scoring, and reliability of the Microscale Audit of Pedestrian Streetscapes (MAPS) tool and its theoretically-based subscales. Methods MAPS was based on prior instruments and was developed to assess details of streetscapes considered relevant for physical activity. MAPS sections (route, segments, crossings, and cul-de-sacs) were scored by two independent raters for reliability analyses. There were 290 route pairs, 516 segment pairs, 319 crossing pairs, and 53 cul-de-sac pairs in the reliability sample. Individual inter-rater item reliability analyses were computed using Kappa, intra-class correlation coefficient (ICC), and percent agreement. A conceptual framework for subscale creation was developed using theory, expert consensus, and policy relevance. Items were grouped into subscales, and subscales were analyzed for inter-rater reliability at tiered levels of aggregation. Results There were 160 items included in the subscales (out of 201 items total). Of those included in the subscales, 80 items (50.0%) had good/excellent reliability, 41 items (25.6%) had moderate reliability, and 18 items (11.3%) had low reliability, with limited variability in the remaining 21 items (13.1%). Seventeen of the 20 route section subscales, valence (positive/negative) scores, and overall scores (85.0%) demonstrated good/excellent reliability and 3 demonstrated moderate reliability. Of the 16 segment subscales, valence scores, and overall scores, 12 (75.0%) demonstrated good/excellent reliability, three demonstrated moderate reliability, and one demonstrated poor reliability. Of the 8 crossing subscales, valence scores, and overall scores, 6 (75.0%) demonstrated good/excellent reliability, and

Reliability Analysis of Uniaxially Ground Brittle Materials

NASA Technical Reports Server (NTRS)

Salem, Jonathan A.; Nemeth, Noel N.; Powers, Lynn M.; Choi, Sung R.

1995-01-01

The fast fracture strength distribution of uniaxially ground, alpha silicon carbide was investigated as a function of grinding angle relative to the principal stress direction in flexure. Both as-ground and ground/annealed surfaces were investigated. The resulting flexural strength distributions were used to verify reliability models and predict the strength distribution of larger plate specimens tested in biaxial flexure. Complete fractography was done on the specimens. Failures occurred from agglomerates, machining cracks, or hybrid flaws that consisted of a machining crack located at a processing agglomerate. Annealing eliminated failures due to machining damage. Reliability analyses were performed using two and three parameter Weibull and Batdorf methodologies. The Weibull size effect was demonstrated for machining flaws. Mixed mode reliability models reasonably predicted the strength distributions of uniaxial flexure and biaxial plate specimens.

Inter-rater reliability for movement pattern analysis (MPA): measuring patterning of behaviors versus discrete behavior counts as indicators of decision-making style

PubMed Central

Connors, Brenda L.; Rende, Richard; Colton, Timothy J.

2014-01-01

The unique yield of collecting observational data on human movement has received increasing attention in a number of domains, including the study of decision-making style. As such, interest has grown in the nuances of core methodological issues, including the best ways of assessing inter-rater reliability. In this paper we focus on one key topic – the distinction between establishing reliability for the patterning of behaviors as opposed to the computation of raw counts – and suggest that reliability for each be compared empirically rather than determined a priori. We illustrate by assessing inter-rater reliability for key outcome measures derived from movement pattern analysis (MPA), an observational methodology that records body movements as indicators of decision-making style with demonstrated predictive validity. While reliability ranged from moderate to good for raw counts of behaviors reflecting each of two Overall Factors generated within MPA (Assertion and Perspective), inter-rater reliability for patterning (proportional indicators of each factor) was significantly higher and excellent (ICC = 0.89). Furthermore, patterning, as compared to raw counts, provided better prediction of observable decision-making process assessed in the laboratory. These analyses support the utility of using an empirical approach to inform the consideration of measuring patterning versus discrete behavioral counts of behaviors when determining inter-rater reliability of observable behavior. They also speak to the substantial reliability that may be achieved via application of theoretically grounded observational systems such as MPA that reveal thinking and action motivations via visible movement patterns. PMID:24999336

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 4: HARP Output (HARPO) graphics display user's guide

NASA Technical Reports Server (NTRS)

Sproles, Darrell W.; Bavuso, Salvatore J.

1994-01-01

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical postprocessor program HARPO (HARP Output). HARPO reads ASCII files generated by HARP. It provides an interactive plotting capability that can be used to display alternate model data for trade-off analyses. File data can also be imported to other commercial software programs.

Reliability Correction for Functional Connectivity: Theory and Implementation

PubMed Central

Mueller, Sophia; Wang, Danhong; Fox, Michael D.; Pan, Ruiqi; Lu, Jie; Li, Kuncheng; Sun, Wei; Buckner, Randy L.; Liu, Hesheng

2016-01-01

Network properties can be estimated using functional connectivity MRI (fcMRI). However, regional variation of the fMRI signal causes systematic biases in network estimates including correlation attenuation in regions of low measurement reliability. Here we computed the spatial distribution of fcMRI reliability using longitudinal fcMRI datasets and demonstrated how pre-estimated reliability maps can correct for correlation attenuation. As a test case of reliability-based attenuation correction we estimated properties of the default network, where reliability was significantly lower than average in the medial temporal lobe and higher in the posterior medial cortex, heterogeneity that impacts estimation of the network. Accounting for this bias using attenuation correction revealed that the medial temporal lobe’s contribution to the default network is typically underestimated. To render this approach useful to a greater number of datasets, we demonstrate that test-retest reliability maps derived from repeated runs within a single scanning session can be used as a surrogate for multi-session reliability mapping. Using data segments with different scan lengths between 1 and 30 min, we found that test-retest reliability of connectivity estimates increases with scan length while the spatial distribution of reliability is relatively stable even at short scan lengths. Finally, analyses of tertiary data revealed that reliability distribution is influenced by age, neuropsychiatric status and scanner type, suggesting that reliability correction may be especially important when studying between-group differences. Collectively, these results illustrate that reliability-based attenuation correction is an easily implemented strategy that mitigates certain features of fMRI signal nonuniformity. PMID:26493163

Reliability and validity of a Tutorial Group Effectiveness Instrument.

PubMed

Singaram, Veena S; Van Der Vleuten, Cees P M; Van Berkel, Henk; Dolmans, Diana H J M

2010-01-01

Tutorial group effectiveness is essential for the success of learning in problem-based learning (PBL). Less effective and dysfunctional groups compromise the quality of students learning in PBL. This article aims to report on the reliability and validity of an instrument aimed at measuring tutorial group effectiveness in PBL. The items within the instrument are clustered around motivational and cognitive factors based on Slavin's theoretical framework. A confirmatory factor analysis (CFA) was carried out to estimate the validity of the instrument. Furthermore, generalizability studies were conducted and alpha coefficients were computed to determine the reliability and homogeneity of each factor. The CFA indicated that a three-factor model comprising 19 items showed a good fit with the data. Alpha coefficients per factor were high. The findings of the generalizability studies indicated that at least 9-10 student responses are needed in order to obtain reliable data at the tutorial group level. The instrument validated in this study has the potential to provide faculty and students with diagnostic information and feedback about student behaviors that enhance and hinder tutorial group effectiveness.

Research Review: Test-retest reliability of standardized diagnostic interviews to assess child and adolescent psychiatric disorders: a systematic review and meta-analysis.

PubMed

Duncan, Laura; Comeau, Jinette; Wang, Li; Vitoroulis, Irene; Boyle, Michael H; Bennett, Kathryn

2018-02-19

A better understanding of factors contributing to the observed variability in estimates of test-retest reliability in published studies on standardized diagnostic interviews (SDI) is needed. The objectives of this systematic review and meta-analysis were to estimate the pooled test-retest reliability for parent and youth assessments of seven common disorders, and to examine sources of between-study heterogeneity in reliability. Following a systematic review of the literature, multilevel random effects meta-analyses were used to analyse 202 reliability estimates (Cohen's kappa = ҡ) from 31 eligible studies and 5,369 assessments of 3,344 children and youth. Pooled reliability was moderate at ҡ = .58 (CI 95% 0.53-0.63) and between-study heterogeneity was substantial (Q = 2,063 (df = 201), p < .001 and I 2  = 79%). In subgroup analysis, reliability varied across informants for specific types of psychiatric disorder (ҡ = .53-.69 for parent vs. ҡ = .39-.68 for youth) with estimates significantly higher for parents on attention deficit hyperactivity disorder, oppositional defiant disorder and the broad groupings of externalizing and any disorder. Reliability was also significantly higher in studies with indicators of poor or fair study methodology quality (sample size <50, retest interval <7 days). Our findings raise important questions about the meaningfulness of published evidence on the test-retest reliability of SDIs and the usefulness of these tools in both clinical and research contexts. Potential remedies include the introduction of standardized study and reporting requirements for reliability studies, and exploration of other approaches to assessing and classifying child and adolescent psychiatric disorder. © 2018 Association for Child and Adolescent Mental Health.

Validity and reliability of the effort-reward imbalance questionnaire in a sample of 673 Italian teachers.

PubMed

Zurlo, Maria Clelia; Pes, Daniela; Siegrist, Johannes

2010-08-01

This study explores the explicative potential of effort-reward imbalance Model to unveil the dimensions involved in teacher stress process and analyses the psychometric characteristics of the Italian version of the ERI Questionnaire (Siegrist, J Occup Health Psychol 1:27-43, 1996) with respect to a homogeneous occupational group: Italian school teachers. The Italian version of the ERI Questionnaire was submitted to 673 teachers randomly drawn from a cross-section of school types. Internal consistency, reliability, discriminative validity, and factorial structure were evaluated. Predictive validity was explored with respect to a measure of perceived strain, the Crown-Crisp Experiential Index. Discriminative validity was explored with respect to age, gender, education, type of school, the presence/absence of physical pains in the last 12 months before the survey, and teachers' intention to leave the profession. Item-total correlations are for all items included between 0.30 and 0.80 (p < 0.01). Mean inter-item correlation is 0.26. Cronbach's alpha for the whole questionnaire reaches the value of 0.89. The factor analysis identified four reliable factors that accounted for 44.8 per cent of the total variance and which confirmed the basic structure emerged from previous studies yet highlighting two instead of three different components for reward. Higher efforts (T = -3.82, p < 0.001) and both lower material (T = 3.23, p < 0.001) and immaterial rewards (T = 3.17, p < 0.005) characterised the group of teachers, which reported to suffer for physical pains. Higher efforts (T = -5.26, p < 0.001), higher overcommitment (T = -3.15, p < 0.005), and both lower material (T = 4.63, p < 0.001) and immaterial rewards (T = 4.00, p < 0.001) were observed in the group of teachers inclined to give up the job. Multiple regression analyses have highlighted that higher efforts, higher overcommitment, and lower rewards are significantly predictive of higher levels of free-floating and

A global gridded dataset of daily precipitation going back to 1950, ideal for analysing precipitation extremes

NASA Astrophysics Data System (ADS)

Contractor, S.; Donat, M.; Alexander, L. V.

2017-12-01

Reliable observations of precipitation are necessary to determine past changes in precipitation and validate models, allowing for reliable future projections. Existing gauge based gridded datasets of daily precipitation and satellite based observations contain artefacts and have a short length of record, making them unsuitable to analyse precipitation extremes. The largest limiting factor for the gauge based datasets is a dense and reliable station network. Currently, there are two major data archives of global in situ daily rainfall data, first is Global Historical Station Network (GHCN-Daily) hosted by National Oceanic and Atmospheric Administration (NOAA) and the other by Global Precipitation Climatology Centre (GPCC) part of the Deutsche Wetterdienst (DWD). We combine the two data archives and use automated quality control techniques to create a reliable long term network of raw station data, which we then interpolate using block kriging to create a global gridded dataset of daily precipitation going back to 1950. We compare our interpolated dataset with existing global gridded data of daily precipitation: NOAA Climate Prediction Centre (CPC) Global V1.0 and GPCC Full Data Daily Version 1.0, as well as various regional datasets. We find that our raw station density is much higher than other datasets. To avoid artefacts due to station network variability, we provide multiple versions of our dataset based on various completeness criteria, as well as provide the standard deviation, kriging error and number of stations for each grid cell and timestep to encourage responsible use of our dataset. Despite our efforts to increase the raw data density, the in situ station network remains sparse in India after the 1960s and in Africa throughout the timespan of the dataset. Our dataset would allow for more reliable global analyses of rainfall including its extremes and pave the way for better global precipitation observations with lower and more transparent uncertainties.

Validity and reliability of a scale to measure genital body image.

PubMed

Zielinski, Ruth E; Kane-Low, Lisa; Miller, Janis M; Sampselle, Carolyn

2012-01-01

Women's body image dissatisfaction extends to body parts usually hidden from view--their genitals. Ability to measure genital body image is limited by lack of valid and reliable questionnaires. We subjected a previously developed questionnaire, the Genital Self Image Scale (GSIS) to psychometric testing using a variety of methods. Five experts determined the content validity of the scale. Then using four participant groups, factor analysis was performed to determine construct validity and to identify factors. Further construct validity was established using the contrasting groups approach. Internal consistency and test-retest reliability was determined. Twenty one of 29 items were considered content valid. Two items were added based on expert suggestions. Factor analysis was undertaken resulting in four factors, identified as Genital Confidence, Appeal, Function, and Comfort. The revised scale (GSIS-20) included 20 items explaining 59.4% of the variance. Women indicating an interest in genital cosmetic surgery exhibited significantly lower scores on the GSIS-20 than those who did not. The final 20 item scale exhibited internal reliability across all sample groups as well as test-retest reliability. The GSIS-20 provides a measure of genital body image demonstrating reliability and validity across several populations of women.

Psychosocial Adjustment to Illness Scale: Factor structure, reliability, and validity assessment in a sample of Greek breast cancer patients.

PubMed

Kolokotroni, Philippa; Anagnostopoulos, Fotios; Missitzis, Ioannis

2017-07-01

The study and measurement of psychosocial adjustment is important for evaluating patients' well-being, and assessing the illness's course, treatment's success, and patients' recovery. In this study, internal consistency reliability and construct validity of the Greek version of the Psychosocial Adjustment to Illness Scale-Self-Report (PAIS-SR) were examined. Demographic and psychosocial data were collected from a sample of 243 women with breast cancer, recruited from September 2011 to December 2012. With some exceptions in specific items, the original conceptually-derived PAIS-SR subscales emerged in a seven-factor solution. Social Environment, Job and Household Duties, and Psychological Distress accounted for more of the total variance than other subscales. PAIS-SR showed good internal consistency reliability, with Cronbach's alpha coefficients >0.62. Correlations of PAIS-SR domains with measures of quality of life and posttraumatic stress symptoms supported the convergent validity of the PAIS-SR and its significance for cancer research. The Greek version of the PAIS-SR has acceptable internal consistency reliability and construct validity, as well as satisfactory convergent validity. Results provide some suggestions for the development of programs to evaluate adjustment status and implement psychosocial interventions among breast cancer survivors.

How reliable and accurate is the AO/OTA comprehensive classification for adult long-bone fractures?

PubMed

Meling, Terje; Harboe, Knut; Enoksen, Cathrine H; Aarflot, Morten; Arthursson, Astvaldur J; Søreide, Kjetil

2012-07-01

Reliable classification of fractures is important for treatment allocation and study comparisons. The overall accuracy of scoring applied to a general population of fractures is little known. This study aimed to investigate the accuracy and reliability of the comprehensive Arbeitsgemeinschaft für Osteosynthesefragen/Orthopedic Trauma Association classification for adult long-bone fractures and identify factors associated with poor coding agreement. Adults (>16 years) with long-bone fractures coded in a Fracture and Dislocation Registry at the Stavanger University Hospital during the fiscal year 2008 were included. An unblinded reference code dataset was generated for the overall accuracy assessment by two experienced orthopedic trauma surgeons. Blinded analysis of intrarater reliability was performed by rescoring and of interrater reliability by recoding of a randomly selected fracture sample. Proportion of agreement (PA) and kappa (κ) statistics are presented. Uni- and multivariate logistic regression analyses of factors predicting accuracy were performed. During the study period, 949 fractures were included and coded by 26 surgeons. For the intrarater analysis, overall agreements were κ = 0.67 (95% confidence interval [CI]: 0.64-0.70) and PA 69%. For interrater assessment, κ = 0.67 (95% CI: 0.62-0.72) and PA 69%. The accuracy of surgeons' blinded recoding was κ = 0.68 (95% CI: 0.65- 0.71) and PA 68%. Fracture type, frequency of the fracture, and segment fractured significantly influenced accuracy whereas the coder's experience did not. Both the reliability and accuracy of the comprehensive Arbeitsgemeinschaft für Osteosynthesefragen/Orthopedic Trauma Association classification for long-bone fractures ranged from substantial to excellent. Variations in coding accuracy seem to be related more to the fracture itself than the surgeon. Diagnostic study, level I.

Reliability and Validity of the Sexual Pressure Scale for Women-Revised

PubMed Central

Jones, Rachel; Gulick, Elsie

2008-01-01

Sexual pressure among young urban women represents adherence to gender stereotypical expectations to engage in sex. Revision of the original 5-factor Sexual Pressure Scale was undertaken in two studies to improve reliabilities in two of the five factors. In Study 1 the reliability of the Sexual Pressure Scale for Women-Revised (SPSW-R) was tested, and principal components analysis was performed in a sample of 325 young, urban women. A parsimonious 18-item, 4-factor model explained 61% of the variance. In Study 2 the theory underlying sexual pressure was supported by confirmatory factor analysis using structural equation modeling in a sample of 181 women. Reliabilities of the SPSW-R total and subscales were very satisfactory, suggesting it may be used in intervention research. PMID:18666222

Relating Measurement Invariance, Cross-Level Invariance, and Multilevel Reliability.

PubMed

Jak, Suzanne; Jorgensen, Terrence D

2017-01-01

Data often have a nested, multilevel structure, for example when data are collected from children in classrooms. This kind of data complicate the evaluation of reliability and measurement invariance, because several properties can be evaluated at both the individual level and the cluster level, as well as across levels. For example, cross-level invariance implies equal factor loadings across levels, which is needed to give latent variables at the two levels a similar interpretation. Reliability at a specific level refers to the ratio of true score variance over total variance at that level. This paper aims to shine light on the relation between reliability, cross-level invariance, and strong factorial invariance across clusters in multilevel data. Specifically, we will illustrate how strong factorial invariance across clusters implies cross-level invariance and perfect reliability at the between level in multilevel factor models.

Reliability and validity of the Norwegian WHOQOL-OLD module.

PubMed

Halvorsrud, Liv; Kalfoss, Mary; Diseth, Age

2008-06-01

The aim of this study was to examine the validity and reliability of the Norwegian WHOQOL-OLD six-facet, 24-item module designed for assessing generic quality of life cross-culturally among the elderly. Using quota-stratified sampling defined on the basis of sex, age and geographical representation, 401 respondents were drawn from Statistics Norway and completed postal surveys. An additional 89 elderly completed personal interviews. Correlation and multivariate analyses partly confirmed the relevance of individual items and facets in both groups. All items correlated significantly higher with their original facets, although almost half of these items correlated with other facets in both groups. Multiple regression analysis of the module and two overall questions (dependent variables) showed that three facets made significant contributions to overall health, with Social Participation (B = 0.09) contributing most strongly in the postal-group. In the interview-group, only Social Participation (B = 0.20) was found to make a significant contribution, and this was in relation to overall health satisfaction. When the WHOQOL-BREF total score was considered as the dependent variable, different facets contributed significantly in both groups. Exploratory factor analysis of the WHOQOL-OLD in the combined group of both postal and interview samples, resulted in a five-factor solution (eigenvalues >1) explaining 65% of the cumulative variance in five of the six originally operationalized facets. The most conceptually clear facets were Death and Dying and Sensory Abilities. Further, confirmatory factor analyses in the combined group demonstrated a model with good fit, but with high covariance between the factors. Acceptable internal consistency was shown except for the Past, Present and Future Activities in both groups. Since construct validity was only partially confirmed, exploration of the scale's conceptual validity needs further testing in Norwegian and international samples.

Recent advances in computational structural reliability analysis methods

NASA Astrophysics Data System (ADS)

Thacker, Ben H.; Wu, Y.-T.; Millwater, Harry R.; Torng, Tony Y.; Riha, David S.

1993-10-01

The goal of structural reliability analysis is to determine the probability that the structure will adequately perform its intended function when operating under the given environmental conditions. Thus, the notion of reliability admits the possibility of failure. Given the fact that many different modes of failure are usually possible, achievement of this goal is a formidable task, especially for large, complex structural systems. The traditional (deterministic) design methodology attempts to assure reliability by the application of safety factors and conservative assumptions. However, the safety factor approach lacks a quantitative basis in that the level of reliability is never known and usually results in overly conservative designs because of compounding conservatisms. Furthermore, problem parameters that control the reliability are not identified, nor their importance evaluated. A summary of recent advances in computational structural reliability assessment is presented. A significant level of activity in the research and development community was seen recently, much of which was directed towards the prediction of failure probabilities for single mode failures. The focus is to present some early results and demonstrations of advanced reliability methods applied to structural system problems. This includes structures that can fail as a result of multiple component failures (e.g., a redundant truss), or structural components that may fail due to multiple interacting failure modes (e.g., excessive deflection, resonate vibration, or creep rupture). From these results, some observations and recommendations are made with regard to future research needs.

Recent advances in computational structural reliability analysis methods

NASA Technical Reports Server (NTRS)

Thacker, Ben H.; Wu, Y.-T.; Millwater, Harry R.; Torng, Tony Y.; Riha, David S.

1993-01-01

The goal of structural reliability analysis is to determine the probability that the structure will adequately perform its intended function when operating under the given environmental conditions. Thus, the notion of reliability admits the possibility of failure. Given the fact that many different modes of failure are usually possible, achievement of this goal is a formidable task, especially for large, complex structural systems. The traditional (deterministic) design methodology attempts to assure reliability by the application of safety factors and conservative assumptions. However, the safety factor approach lacks a quantitative basis in that the level of reliability is never known and usually results in overly conservative designs because of compounding conservatisms. Furthermore, problem parameters that control the reliability are not identified, nor their importance evaluated. A summary of recent advances in computational structural reliability assessment is presented. A significant level of activity in the research and development community was seen recently, much of which was directed towards the prediction of failure probabilities for single mode failures. The focus is to present some early results and demonstrations of advanced reliability methods applied to structural system problems. This includes structures that can fail as a result of multiple component failures (e.g., a redundant truss), or structural components that may fail due to multiple interacting failure modes (e.g., excessive deflection, resonate vibration, or creep rupture). From these results, some observations and recommendations are made with regard to future research needs.

Reliability and Validity of the Revised Summary of Diabetes Self-Care Activities (SDSCA) for Malaysian Children and Adolescents.

PubMed

Jalaludin, My; Fuziah, Mz; Hong, Jyh; Mohamad Adam, B; Jamaiyah, H

2012-01-01

Self-care plays an important role in diabetes management. One of the instruments used to evaluate self-care in patients with diabetes is the Summary of Diabetes Self-Care Activities (SDSCA) questionnaire. A validated instrument in the Malay language is used to assess self-care practice among children and adolescents with diabetes in Malaysia. To translate and evaluate the psychometric properties of the revised version of the SDSCA questionnaire in the Malay language. Forward and backward translations were performed. An expert panel reviewed all versions for conceptual and content equivalence. The final version was administered to paediatric patients with diabetes between August 2006 and September 2007. Reliability was analysed using Cronbach's alpha and validity was assessed using exploratory factor analysis. A total of 117 patients aged 10-18 years were enrolled from nine hospitals. The reliability of overall core items was 0.735 (with item 4) while the reliabilities of the four domains were in the range of 0.539-0.838. As core item number 4 was found to be problematic and it was subtituted by item 5a (from the expanded SDSCA) to suit local dietary education and practice; and the reliabilities of the overall core item (0.782) and the four domains (0.620 - 0.838) improved. Factor loadings of all the items were greater than 0.4, loaded into the original domains, and accounted for 73% of the total variance. The Malay translation of the revised English SDSCA is reliable and valid as a guide for Malaysian children and adolescents suffering from diabetes.

The FACIT-Sp spiritual well-being scale: an investigation of the dimensionality, reliability and construct validity in a cognitively intact nursing home population.

PubMed

Haugan, Gørill

2015-03-01

Spiritual well-being has been found to be a strong individual predictor of overall nursing home satisfaction and a fundamental dimension of global as well as health-related quality-in-life among nursing home patients. Therefore, access to a valid and reliable measure of spiritual well-being among nursing home patients is highly warranted. The aim of this study was to investigate the dimensionality, reliability and construct validity of the Functional Assessment of Chronic Illness Therapy Spiritual Wellbeing scale in a cognitively intact nursing home population. A cross-sectional design was applied, selecting two counties in central Norway from which 20 municipalities representing 44 different nursing homes took part in this study. Long-term care was defined as 24-hour care with duration of 6 months or longer. Participants were 202 cognitively intact long-term nursing home patients fulfilling the inclusion criteria. Approval by all regulatory institutions dealing with research issues in Norway and the Management Unit at the 44 nursing homes was obtained. Explorative and confirmative factor analyses as well as correlation with selected construct were used. Though three items loaded very low (λ = 0.22, 0.26, 0.32) indicating low reliability, the three-factor model for the FACIT-Sp spiritual well-being scale provided an acceptable fit (χ(2) = 101.15 (df = 50), p-value <0.001, RMSEA = 0.075 p = 0.030, NFI = 0.90, GFI = 0.91, AGFI = 0.85) for older nursing home patients, demonstrating acceptable measurement reliability. Construct validity was supported by significant correlations in the hypothesised direction with the selected constructs. The three-factor model is an improvement over the original two-factor construct, based on these nursing home data. The measure yielded significantly factor loadings, good composite reliability and construct validity. © 2014 Nordic College of Caring Science.

Long-term reliability of ImPACT in professional ice hockey.

PubMed

Echemendia, Ruben J; Bruce, Jared M; Meeuwisse, Willem; Comper, Paul; Aubry, Mark; Hutchison, Michael

2016-02-01

This study sought to assess the test-retest reliability of Immediate Post-Concussion Assessment and Cognitive Testing (ImPACT) across 2-4 year time intervals and evaluate the utility of a newly proposed two-factor (Speed/Memory) model of ImPACT across multiple language versions. Test-retest data were collected from non-concussed National Hockey League (NHL) players across 2-, 3-, and 4-year time intervals. The two-factor model was examined using different language versions (English, French, Czech, Swedish) of the test using a one-year interval, and across 2-4 year intervals using the English version of the test. The two-factor Speed index improved reliability across multiple language versions of ImPACT. The Memory factor also improved but reliability remained below the traditional cutoff of .70 for use in clinical decision-making. ImPACT reliabilities remained low (below .70) regardless of whether the four-composite or the two-factor model was used across 2-, 3-, and 4-year time intervals. The two-factor approach increased ImPACT's one-year reliability over the traditional four-composite model among NHL players. The increased stability in test scores improves the test's ability to detect cognitive changes following injury, which increases the diagnostic utility of the test and allows for better return to play decision-making by reducing the risk of exposing an athlete to additional trauma while the brain may be at a heightened vulnerability to such trauma. Although the Speed Index increases the clinical utility of the test, the stability of the Memory index remains low. Irrespective of whether the two-factor or traditional four-composite approach is used, these data suggest that new baselines should occur on a yearly basis in order to maximize clinical utility.

Reliability and Probabilistic Risk Assessment - How They Play Together

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.; Stutts, Richard; Huang, Zhaofeng

2015-01-01

The objective of this presentation is to discuss the PRA process and the reliability engineering discipline, their differences and similarities, and how they are used as complimentary analyses to support design and flight decisions.

An empirical study of flight control software reliability

NASA Technical Reports Server (NTRS)

Dunham, J. R.; Pierce, J. L.

1986-01-01

The results of a laboratory experiment in flight control software reliability are reported. The experiment tests a small sample of implementations of a pitch axis control law for a PA28 aircraft with over 14 million pitch commands with varying levels of additive input and feedback noise. The testing which uses the method of n-version programming for error detection surfaced four software faults in one implementation of the control law. The small number of detected faults precluded the conduct of the error burst analyses. The pitch axis problem provides data for use in constructing a model in the prediction of the reliability of software in systems with feedback. The study is undertaken to find means to perform reliability evaluations of flight control software.

Characterizing Measurement Error in Test Scores across Studies: A Tutorial on Conducting "Reliability Generalization" Analyses.

ERIC Educational Resources Information Center

Henson, Robin K.; Thompson, Bruce

Given the potential value of reliability generalization (RG) studies in the development of cumulative psychometric knowledge, the purpose of this paper is to provide a tutorial on how to conduct such studies and to serve as a guide for researchers wishing to use this methodology. After some brief comments on classical test theory, the paper…

Psychometrics Matter in Health Behavior: A Long-term Reliability Generalization Study.

PubMed

Pickett, Andrew C; Valdez, Danny; Barry, Adam E

2017-09-01

Despite numerous calls for increased understanding and reporting of reliability estimates, social science research, including the field of health behavior, has been slow to respond and adopt such practices. Therefore, we offer a brief overview of reliability and common reporting errors; we then perform analyses to examine and demonstrate the variability of reliability estimates by sample and over time. Using meta-analytic reliability generalization, we examined the variability of coefficient alpha scores for a well-designed, consistent, nationwide health study, covering a span of nearly 40 years. For each year and sample, reliability varied. Furthermore, reliability was predicted by a sample characteristic that differed among age groups within each administration. We demonstrated that reliability is influenced by the methods and individuals from which a given sample is drawn. Our work echoes previous calls that psychometric properties, particularly reliability of scores, are important and must be considered and reported before drawing statistical conclusions.

Reliability and validity of 12-item Short-Form health survey (SF-12) for the health status of Chinese community elderly population in Xujiahui district of Shanghai.

PubMed

Shou, Juan; Ren, Limin; Wang, Haitang; Yan, Fei; Cao, Xiaoyun; Wang, Hui; Wang, Zhiliang; Zhu, Shanzhu; Liu, Yao

2016-04-01

The 12-item Short-Form Health Survey (SF-12) is the abridged practical version of SF-36. This cross-sectional study was aimed to assess the reliability and validity of SF-12 for the health status of Chinese community elderly population. The Chinese community elderly people in Xujiahui district of Shanghai were investigated. The internal consistency reliability was assessed using Cronbach's alpha and split-half reliability coefficients. Construct validity was analyzed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). Spearman's correlation coefficient (ρ) was used for the evaluation of criterion, convergent, and discriminant validity with Spearman's ρ ≥ 0.4 as satisfactory. Comparisons of the SF-12 summary scores among populations that differed in demographics were performed for discriminant validity. Total 1343 individuals aged ≥60 and <85 years old (response rate: 91.3 %) were analyzed. The Cronbach's α value (0.910) and the split-half reliability coefficient (0.812) reflected satisfactory internal consistency reliability of SF-12. EFA extracted a two-factor model (physical and mental health). About 60.7 % of the total variance was explained by the two factors. CFA showed that the two-factor solution provided a good fit to the data. Good convergent validity and discriminant validity of SF-12 were proved by the correction analyses (Spearman's ρ > 0.4) and the comparisons of the SF-12 summary scores among populations (P < 0.05). SF-12 summary scores were significantly correlated with the SF-36 summary scores (Spearman's ρ > 0.4, P < 0.05). In conclusion, SF-12 had satisfactory reliability and validity in measuring health status of Chinese community elderly population in Xujiahui district of Shanghai.

Validity and reliability of parental report of frequency, severity and risk factors of urinary tract infection and urinary incontinence in children.

PubMed

Sureshkumar, Premala; Cumming, Robert G; Craig, Jonathan C

2006-06-01

We describe the validity and reliability of a questionnaire designed to determine frequency, severity and risk factors of urinary tract infection and daytime urinary incontinence in primary school-age children. Based on published validated questionnaires and advice from content experts, a questionnaire was developed and piloted in children attending outpatient clinics. Construct validity for parent report of frequency and severity of daytime urinary incontinence was tested by comparison with a daily accident diary in 52 primary school children, and criterion validity of parent report for UTI was verified by comparison with the reference standard (urine culture) in 100 primary school children. Test-retest reliability of the questionnaire was assessed in 106 children from primary schools. There was excellent agreement between the questionnaire and accident diary in severity (weighted kappa 0.94, 95% confidence intervals 0.85 to 1.03) and frequency of daytime urinary incontinence (0.88, 0.7 to 1.0). Parents reported urinary tract infection in 15% of children, compared to a positive urine culture in 8% (sensitivity 100% and specificity 68.5%). Test-retest reliability of the questionnaire was excellent (mean k 0.78, range 0.61 to 1.00). Parents overreport UTI by about 2-fold but can recall frequency and severity of daytime urinary incontinence well during a 3-month period. The developed questionnaire is a valid tool to estimate frequency, severity and risk factors of daytime urinary incontinence and UTI in primary school children.

Test-Retest Reliability of the Short-Form Survivor Unmet Needs Survey.

PubMed

Taylor, Karen; Bulsara, Max; Monterosso, Leanne

2018-01-01

Reliable and valid needs assessment measures are important assessment tools in cancer survivorship care. A new 30-item short-form version of the Survivor Unmet Needs Survey (SF-SUNS) was developed and validated with cancer survivors, including hematology cancer survivors; however, test-retest reliability has not been established. The objective of this study was to assess the test-retest reliability of the SF-SUNS with a cohort of lymphoma survivors ( n = 40). Test-retest reliability of the SF-SUNS was conducted at two time points: baseline (time 1) and 5 days later (time 2). Test-retest data were collected from lymphoma cancer survivors ( n = 40) in a large tertiary cancer center in Western Australia. Intraclass correlation analyses compared data at time 1 (baseline) and time 2 (5 days later). Cronbach's alpha analyses were performed to assess the internal consistency at both time points. The majority (23/30, 77%) of items achieved test-retest reliability scores 0.45-0.74 (fair to good). A high degree of overall internal consistency was demonstrated (time 1 = 0.92, time 2 = 0.95), with scores 0.65-0.94 across subscales for both time points. Mixed test-retest reliability of the SF-SUNS was established. Our results indicate the SF-SUNS is responsive to the changing needs of lymphoma cancer survivors. Routine use of cancer survivorship specific needs-based assessments is required in oncology care today. Nurses are well placed to administer these assessments and provide tailored information and resources. Further assessment of test-retest reliability in hematology and other cancer cohorts is warranted.

fMRI reliability: influences of task and experimental design.

PubMed

Bennett, Craig M; Miller, Michael B

2013-12-01

As scientists, it is imperative that we understand not only the power of our research tools to yield results, but also their ability to obtain similar results over time. This study is an investigation into how common decisions made during the design and analysis of a functional magnetic resonance imaging (fMRI) study can influence the reliability of the statistical results. To that end, we gathered back-to-back test-retest fMRI data during an experiment involving multiple cognitive tasks (episodic recognition and two-back working memory) and multiple fMRI experimental designs (block, event-related genetic sequence, and event-related m-sequence). Using these data, we were able to investigate the relative influences of task, design, statistical contrast (task vs. rest, target vs. nontarget), and statistical thresholding (unthresholded, thresholded) on fMRI reliability, as measured by the intraclass correlation (ICC) coefficient. We also utilized data from a second study to investigate test-retest reliability after an extended, six-month interval. We found that all of the factors above were statistically significant, but that they had varying levels of influence on the observed ICC values. We also found that these factors could interact, increasing or decreasing the relative reliability of certain Task × Design combinations. The results suggest that fMRI reliability is a complex construct whose value may be increased or decreased by specific combinations of factors.

Reliability and testing

NASA Technical Reports Server (NTRS)

Auer, Werner

1996-01-01

Reliability and its interdependence with testing are important topics for development and manufacturing of successful products. This generally accepted fact is not only a technical statement, but must be also seen in the light of 'Human Factors.' While the background for this paper is the experience gained with electromechanical/electronic space products, including control and system considerations, it is believed that the content could be also of interest for other fields.

Highly reliable oxide VCSELs for datacom applications

NASA Astrophysics Data System (ADS)

Aeby, Ian; Collins, Doug; Gibson, Brian; Helms, Christopher J.; Hou, Hong Q.; Lou, Wenlin; Bossert, David J.; Wang, Charlie X.

2003-06-01

In this paper we describe the processes and procedures that have been developed to ensure high reliability for Emcore"s 850 nm oxide confined GaAs VCSELs. Evidence from on-going accelerated life testing and other reliability studies that confirm that this process yields reliable products will be discussed. We will present data and analysis techniques used to determine the activation energy and acceleration factors for the dominant wear-out failure mechanisms for our devices as well as our estimated MTTF of greater than 2 million use hours. We conclude with a summary of internal verification and field return rate validation data.

A Review on VSC-HVDC Reliability Modeling and Evaluation Techniques

NASA Astrophysics Data System (ADS)

Shen, L.; Tang, Q.; Li, T.; Wang, Y.; Song, F.

2017-05-01

With the fast development of power electronics, voltage-source converter (VSC) HVDC technology presents cost-effective ways for bulk power transmission. An increasing number of VSC-HVDC projects has been installed worldwide. Their reliability affects the profitability of the system and therefore has a major impact on the potential investors. In this paper, an overview of the recent advances in the area of reliability evaluation for VSC-HVDC systems is provided. Taken into account the latest multi-level converter topology, the VSC-HVDC system is categorized into several sub-systems and the reliability data for the key components is discussed based on sources with academic and industrial backgrounds. The development of reliability evaluation methodologies is reviewed and the issues surrounding the different computation approaches are briefly analysed. A general VSC-HVDC reliability evaluation procedure is illustrated in this paper.

The Mindful Attention Awareness Scale: Further Examination of Dimensionality, Reliability, and Concurrent Validity Estimates.

PubMed

Osman, Augustine; Lamis, Dorian A; Bagge, Courtney L; Freedenthal, Stacey; Barnes, Sean M

2016-01-01

We examined the factor structure and psychometric properties of the Mindful Attention Awareness Scale (MAAS) in a sample of 810 undergraduate students. Using common exploratory factor analysis (EFA), we obtained evidence for a 1-factor solution (41.84% common variance). To confirm unidimensionality of the 15-item MAAS, we conducted a 1-factor confirmatory factor analysis (CFA). Results of the EFA and CFA, respectively, provided support for a unidimensional model. Using differential item functioning analysis methods within item response theory modeling (IRT-based DIF), we found that individuals with high and low levels of nonattachment responded similarly to the MAAS items. Following a detailed item analysis, we proposed a 5-item short version of the instrument and present descriptive statistics and composite score reliability for the short and full versions of the MAAS. Finally, correlation analyses showed that scores on the full and short versions of the MAAS were associated with measures assessing related constructs. The 5-item MAAS is as useful as the original MAAS in enhancing our understanding of the mindfulness construct.

Managing Reliability in the 21st Century

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dellin, T.A.

1998-11-23

The rapid pace of change at Ike end of the 20th Century should continue unabated well into the 21st Century. The driver will be the marketplace imperative of "faster, better, cheaper." This imperative has already stimulated a revolution-in-engineering in design and manufacturing. In contrast, to date, reliability engineering has not undergone a similar level of change. It is critical that we implement a corresponding revolution-in-reliability-engineering as we enter the new millennium. If we are still using 20th Century reliability approaches in the 21st Century, then reliability issues will be the limiting factor in faster, better, and cheaper. At the heartmore » of this reliability revolution will be a science-based approach to reliability engineering. Science-based reliability will enable building-in reliability, application-specific products, virtual qualification, and predictive maintenance. The purpose of this paper is to stimulate a dialogue on the future of reliability engineering. We will try to gaze into the crystal ball and predict some key issues that will drive reliability programs in the new millennium. In the 21st Century, we will demand more of our reliability programs. We will need the ability to make accurate reliability predictions that will enable optimizing cost, performance and time-to-market to meet the needs of every market segment. We will require that all of these new capabilities be in place prior to the stint of a product development cycle. The management of reliability programs will be driven by quantifiable metrics of value added to the organization business objectives.« less

Reliability of conditioned pain modulation: a systematic review

PubMed Central

Kennedy, Donna L.; Kemp, Harriet I.; Ridout, Deborah; Yarnitsky, David; Rice, Andrew S.C.

2016-01-01

Abstract A systematic literature review was undertaken to determine if conditioned pain modulation (CPM) is reliable. Longitudinal, English language observational studies of the repeatability of a CPM test paradigm in adult humans were included. Two independent reviewers assessed the risk of bias in 6 domains; study participation; study attrition; prognostic factor measurement; outcome measurement; confounding and analysis using the Quality in Prognosis Studies (QUIPS) critical assessment tool. Intraclass correlation coefficients (ICCs) less than 0.4 were considered to be poor; 0.4 and 0.59 to be fair; 0.6 and 0.75 good and greater than 0.75 excellent. Ten studies were included in the final review. Meta-analysis was not appropriate because of differences between studies. The intersession reliability of the CPM effect was investigated in 8 studies and reported as good (ICC = 0.6-0.75) in 3 studies and excellent (ICC > 0.75) in subgroups in 2 of those 3. The assessment of risk of bias demonstrated that reporting is not comprehensive for the description of sample demographics, recruitment strategy, and study attrition. The absence of blinding, a lack of control for confounding factors, and lack of standardisation in statistical analysis are common. Conditioned pain modulation is a reliable measure; however, the degree of reliability is heavily dependent on stimulation parameters and study methodology and this warrants consideration for investigators. The validation of CPM as a robust prognostic factor in experimental and clinical pain studies may be facilitated by improvements in the reporting of CPM reliability studies. PMID:27559835

Culture Representation in Human Reliability Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Gertman; Julie Marble; Steven Novack

Understanding human-system response is critical to being able to plan and predict mission success in the modern battlespace. Commonly, human reliability analysis has been used to predict failures of human performance in complex, critical systems. However, most human reliability methods fail to take culture into account. This paper takes an easily understood state of the art human reliability analysis method and extends that method to account for the influence of culture, including acceptance of new technology, upon performance. The cultural parameters used to modify the human reliability analysis were determined from two standard industry approaches to cultural assessment: Hofstede’s (1991)more » cultural factors and Davis’ (1989) technology acceptance model (TAM). The result is called the Culture Adjustment Method (CAM). An example is presented that (1) reviews human reliability assessment with and without cultural attributes for a Supervisory Control and Data Acquisition (SCADA) system attack, (2) demonstrates how country specific information can be used to increase the realism of HRA modeling, and (3) discusses the differences in human error probability estimates arising from cultural differences.« less

Reliability and validity of the workplace social distance scale.

PubMed

Yoshii, Hatsumi; Mandai, Nozomu; Saito, Hidemitsu; Akazawa, Kouhei

2014-10-29

Self-stigma, defined by a negative attitude toward oneself combined with the consciousness of being a target of prejudice, is a critical problem for psychiatric patients. Self-stigma studies among psychiatric patients have indicated that high stigma is predictive of detrimental effects such as the delay of treatment and decreases in social participation in patients, and levels of self-stigma should be statistically evaluated. In this study, we developed the Workplace Social Distance Scale (WSDS), rephrasing the eight items of the Japanese version of the Social Distance Scale (SDSJ) to apply to the work setting in Japan. We examined the reliability and validity of the WSDS among 83 psychiatric patients. Factor analysis extracted three factors from the scale items: "work relations," "shallow relationships," and "employment." These factors are similar to the assessment factors of the SDSJ. Cronbach's alpha coefficient for the WSDS was 0.753. The split-half reliability for the WSDS was 0.801, indicating significant correlations. In addition, the WSDS was significantly correlated with the SDSJ. These findings suggest that the WSDS represents an approximation of self-stigma in the workplace among psychiatric patients. Our study assessed the reliability and validity of the WSDS for measuring self-stigma in Japan. Future studies should investigate the reliability and validity of the scale in other countries.

Test Assembly Implications for Providing Reliable and Valid Subscores

ERIC Educational Resources Information Center

Lee, Minji K.; Sweeney, Kevin; Melican, Gerald J.

2017-01-01

This study investigates the relationships among factor correlations, inter-item correlations, and the reliability estimates of subscores, providing a guideline with respect to psychometric properties of useful subscores. In addition, it compares subscore estimation methods with respect to reliability and distinctness. The subscore estimation…

How reliable are Functional Movement Screening scores? A systematic review of rater reliability.

PubMed

Moran, Robert W; Schneiders, Anthony G; Major, Katherine M; Sullivan, S John

2016-05-01

Several physical assessment protocols to identify intrinsic risk factors for injury aetiology related to movement quality have been described. The Functional Movement Screen (FMS) is a standardised, field-expedient test battery intended to assess movement quality and has been used clinically in preparticipation screening and in sports injury research. To critically appraise and summarise research investigating the reliability of scores obtained using the FMS battery. Systematic literature review. Systematic search of Google Scholar, Scopus (including ScienceDirect and PubMed), EBSCO (including Academic Search Complete, AMED, CINAHL, Health Source: Nursing/Academic Edition), MEDLINE and SPORTDiscus. Studies meeting eligibility criteria were assessed by 2 reviewers for risk of bias using the Quality Appraisal of Reliability Studies checklist. Overall quality of evidence was determined using van Tulder's levels of evidence approach. 12 studies were appraised. Overall, there was a 'moderate' level of evidence in favour of 'acceptable' (intraclass correlation coefficient ≥0.6) inter-rater and intra-rater reliability for composite scores derived from live scoring. For inter-rater reliability of composite scores derived from video recordings there was 'conflicting' evidence, and 'limited' evidence for intra-rater reliability. For inter-rater reliability based on live scoring of individual subtests there was 'moderate' evidence of 'acceptable' reliability (κ≥0.4) for 4 subtests (Deep Squat, Shoulder Mobility, Active Straight-leg Raise, Trunk Stability Push-up) and 'conflicting' evidence for the remaining 3 (Hurdle Step, In-line Lunge, Rotary Stability). This review found 'moderate' evidence that raters can achieve acceptable levels of inter-rater and intra-rater reliability of composite FMS scores when using live ratings. Overall, there were few high-quality studies, and the quality of several studies was impacted by poor study reporting particularly in relation to

Reliability of plasma fibroblast growth factor 23 as risk biomarker in epidemiological studies measured over a four-month period.

PubMed

di Giuseppe, Romina; Hirche, Frank; Montonen, Jukka; Buijsse, Brian; Dierkes, Jutta; Stangl, Gabriele I; Boeing, Heiner; Weikert, Cornelia

2012-11-01

Identified as a biomarker of altered calcium-phosphorus metabolism in chronic kidney disease, fibroblast growth factor 23 (FGF-23) can also be used as a biomarker of risk for cardiovascular disease in the general population. However, it is crucial to first evaluate the reproducibility (reliability) of plasma FGF-23 concentrations. We assessed the reliability of plasma FGF-23 concentrations using replicate blood samples taken four months apart of 207 participants from the European Prospective Investigation into Cancer and Nutrition-Potsdam Study. Plasma FGF-23 concentrations at baseline (geometric mean: 24.7 RU/mL; 95% confidence interval [CI] in RU/mL: 21.8-27.9) were not significantly different from those measured four months later (geometric mean: 23.7 RU/mL; 95% CI in RU/mL: 20.6-27.1; P = 0.42). The intraclass correlation coefficients were 0.69 (95% CI: 0.62-0.76) for all; 0.64 (95% CI: 0.50-0.75) for men and 0.73 (95% CI: 0.64-0.81) for women. Plasma FGF-23 concentrations showed good reliability over time. Our findings suggest that in epidemiological studies, a single plasma FGF-23 measurement may be sufficient to derive the relative risk in prospective cohort studies.

Reliability and validity of the Turkish version of the situational self-efficacy scale for fruit and vegetable consumption in adolescents.

PubMed

Kadioglu, Hasibe; Erol, Saime; Ergun, Ayse

2015-01-01

The purpose of this research was to examine the psychometric properties of the Turkish version of the situational self-efficacy scale for vegetable and fruit consumption in adolescents. This was a methodological study. The study was conducted in four public secondary schools in Istanbul, Turkey. Subjects were 1586 adolescents. Content and construct validity were assessed to test the validity of the scale. The reliability was assessed in terms of internal consistency and test-retest reliability. For confirmatory factor analysis, χ(2) statistics plus other fit indices were used, including the goodness-of-fit index, the adjusted goodness-of-fit index, the nonnormed fit index, the comparative fit index, the standardized root mean residual, and the root mean square error of approximation. Pearson's correlation was used for test-retest reliability and item total correlation. The internal consistency was assessed by using Cronbach α. Confirmatory factor analysis strongly supported the three-component structure representing positive social situations (α = .81), negative effect situations (α = .93), and difficult situations (α = .78). Psychometric analyses of the Turkish version of the situational self-efficacy scale indicate high reliability and good content and construct validity. Researchers and health professionals will find it useful to employ the Turkish situational self-efficacy scale in evaluating situational self-efficacy for fruit and vegetable consumption in Turkish adolescents.

Analysis of the factors that impact the reliability of high level waste canister materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, W.K.; Hall, A.M.

1977-09-19

The analysis encompassed identification and analysis of potential threats to canister integrity arising in the course of waste solidification, interim storage at the fuels reprocessing plant, wet and dry shipment, and geologic storage. Fabrication techniques and quality assurance requirements necessary to insure optimum canister reliability were considered taking into account such factors as welding procedure, surface preparation, stress relief, remote weld closure, and inspection methods. Alternative canister materials and canister systems were also considered in terms of optimum reliability in the face of threats to the canister's integrity, ease of fabrication, inspection, handling and cost. If interim storage in airmore » is admissible, the sequence suggested comprises producing a glass-type waste product in a continuous ceramic melter, pouring into a carbon steel or low-alloy steel canister of moderately heavy wall thickness, storing in air upright on a pad and surrounded by a concrete radiation shield, and thereafter placing in geologic storage without overpacking. Should the decision be to store in water during the interim period, then use of either a 304 L stainless steel canister overpacked with a solution-annealed and fast-cooled 304 L container, or a single high-alloy canister, is suggested. The high alloy may be Inconel 600, Incoloy Alloy 800, or Incoloy Alloy 825. In either case, it is suggested that the container be overpacked with a moderately heavy wall carbon steel or low-alloy steel cask for geologic storage to ensure ready retrievability. 19 figs., 5 tables.« less

Increased Reliability for Single-Case Research Results: Is the Bootstrap the Answer?

ERIC Educational Resources Information Center

Parker, Richard I.

2006-01-01

There is need for objective and reliable single-case research (SCR) results in the movement toward evidence-based interventions (EBI), for inclusion in meta-analyses, and for funding accountability in clinical contexts. Yet SCR deals with data that often do not conform to parametric data assumptions and that yield results of low reliability. A…

Conditional Reliability and the Identification of Communities

DTIC Science & Technology

2009-11-09

screening is needed to find the factors and interactions that may be relevant. This problem arises in numerous different settings : screening using D...related to the core communities than to each other. and 4. Develop a set of computational methods for conditional reliability. A report describing...resilience address the question: What is the probability that k nodes can communicate? The difference is that for k-terminal reliability, the k communicating

[Reliability and validity of the modified Perceived Health Competence Scale (PHCS) Japanese version].

PubMed

Togari, Taisuke; Yamazaki, Yoshihiko; Koide, Syotaro; Miyata, Ayako

2006-01-01

In community and workplace health plans, the Perceived Health Competence Scale (PHCS) is employed as an index of health competency. The purpose of this research was to examine the reliability and validity of a modified Japanese PHCS. Interviews were sought with 3,000 randomly selected Japanese individuals using a two-step stratified method. Valid PHCS responses were obtained from 1,910 individuals, yielding a 63.7% response rate. Reliability was assessed using Cronbach's alpha coefficient (henceforth, alpha) to evaluate internal consistency, and by employing item-total correlation and alpha coefficient analyses to assess the effect of removal of variables from the model. To examine content validity, we assessed the correlation between the PHCS score and four respondent attribute characteristics, that is, sex, age, the presence of chronic disease, and the existence of chronic disease at age 18. The correlation between PHCS score and commonly employed healthy lifestyle indices was examined to assess construct validity. General linear model statistical analysis was employed. The modified Japanese PHCS demonstrated a satisfactory alpha coefficient of 0.869. Moreover, reliability was confirmed by item-total correlation and alpha coefficient analyses after removal of variables from the model. Differences in PHCS scores were seen between individuals 60 years and older, and younger individuals. These with current chronic disease, or who had had a chronic disease at age 18, tended to have lower PHCS scores. After controlling for the presence of current or age 18 chronic disease, age, and sex, significant correlations were seen between PHCS scores and tobacco use, dietary habits, and exercise, but not alcohol use or frequency of medical consultation. This study supports the reliability and validity, and hence supports the use, of the modified Japanese PHCS. Future longitudinal research is needed to evaluate the predictive power of modified Japanese PHCS scores, to examine

The Balanced Inventory of Desirable Responding (BIDR): A Reliability Generalization Study

ERIC Educational Resources Information Center

Li, Andrew; Bagger, Jessica

2007-01-01

The Balanced Inventory of Desirable Responding (BIDR) is one of the most widely used social desirability scales. The authors conducted a reliability generalization study to examine the typical reliability coefficients of BIDR scores and explored factors that explained the variability of reliability estimates across studies. The results indicated…

Investigation of low glass transition temperature on COTS PEM's reliability for space applications

NASA Technical Reports Server (NTRS)

Sandor, M.; Agarwal, S.; Peters, D.; Cooper, M. S.

2003-01-01

Plastic Encapsulated Microelectronics (PEM) reliability is affected by many factors. Glass transition temperature (Tg) is one such factor. In this presentation issues relating to PEM reliability and the effect of low glass transition temperature epoxy mold compounds are presented.

Reliability in perceptual analysis of voice quality.

PubMed

Bele, Irene Velsvik

2005-12-01

This study focuses on speaking voice quality in male teachers (n = 35) and male actors (n = 36), who represent untrained and trained voice users, because we wanted to investigate normal and supranormal voices. In this study, both substantial and methodologic aspects were considered. It includes a method for perceptual voice evaluation, and a basic issue was rater reliability. A listening group of 10 listeners, 7 experienced speech-language therapists, and 3 speech-language therapist students evaluated the voices by 15 vocal characteristics using VA scales. Two sets of voice signals were investigated: text reading (2 loudness levels) and sustained vowel (3 levels). The results indicated a high interrater reliability for most perceptual characteristics. Connected speech was evaluated more reliably, especially at the normal level, but both types of voice signals were evaluated reliably, although the reliability for connected speech was somewhat higher than for vowels. Experienced listeners tended to be more consistent in their ratings than did the student raters. Some vocal characteristics achieved acceptable reliability even with a smaller panel of listeners. The perceptual characteristics grouped in 4 factors reflected perceptual dimensions.

Parents' self-efficacy, outcome expectations, and self-reported task performance when managing atopic dermatitis in children: instrument reliability and validity.

PubMed

Mitchell, Amy E; Fraser, Jennifer A

2011-02-01

Support and education for parents faced with managing a child with atopic dermatitis is crucial to the success of current treatments. Interventions aiming to improve parent management of this condition are promising. Unfortunately, evaluation is hampered by lack of precise research tools to measure change. To develop a suite of valid and reliable research instruments to appraise parents' self-efficacy for performing atopic dermatitis management tasks; outcome expectations of performing management tasks; and self-reported task performance in a community sample of parents of children with atopic dermatitis. The Parents' Eczema Management Scale (PEMS) and the Parents' Outcome Expectations of Eczema Management Scale (POEEMS) were developed from an existing self-efficacy scale, the Parental Self-Efficacy with Eczema Care Index (PASECI). Each scale was presented in a single self-administered questionnaire, to measure self-efficacy, outcome expectations, and self-reported task performance related to managing child atopic dermatitis. Each was tested with a community sample of parents of children with atopic dermatitis, and psychometric evaluation of the scales' reliability and validity was conducted. A community-based convenience sample of 120 parents of children with atopic dermatitis completed the self-administered questionnaire. Participants were recruited through schools across Australia. Satisfactory internal consistency and test-retest reliability was demonstrated for all three scales. Construct validity was satisfactory, with positive relationships between self-efficacy for managing atopic dermatitis and general perceived self-efficacy; self-efficacy for managing atopic dermatitis and self-reported task performance; and self-efficacy for managing atopic dermatitis and outcome expectations. Factor analyses revealed two-factor structures for PEMS and PASECI alike, with both scales containing factors related to performing routine management tasks, and managing the

Reliability, Validity, and Responsiveness of InFLUenza Patient-Reported Outcome (FLU-PRO©) Scores in Influenza-Positive Patients.

PubMed

Powers, John H; Bacci, Elizabeth D; Guerrero, M Lourdes; Leidy, Nancy Kline; Stringer, Sonja; Kim, Katherine; Memoli, Matthew J; Han, Alison; Fairchok, Mary P; Chen, Wei-Ju; Arnold, John C; Danaher, Patrick J; Lalani, Tahaniyat; Ridoré, Michelande; Burgess, Timothy H; Millar, Eugene V; Hernández, Andrés; Rodríguez-Zulueta, Patricia; Smolskis, Mary C; Ortega-Gallegos, Hilda; Pett, Sarah; Fischer, William; Gillor, Daniel; Macias, Laura Moreno; DuVal, Anna; Rothman, Richard; Dugas, Andrea; Ruiz-Palacios, Guillermo M

2018-02-01

To assess the reliability, validity, and responsiveness of InFLUenza Patient-Reported Outcome (FLU-PRO©) scores for quantifying the presence and severity of influenza symptoms. An observational prospective cohort study of adults (≥18 years) with influenza-like illness in the United States, the United Kingdom, Mexico, and South America was conducted. Participants completed the 37-item draft FLU-PRO daily for up to 14 days. Item-level and factor analyses were used to remove items and determine factor structure. Reliability of the final tool was estimated using Cronbach α and intraclass correlation coefficients (2-day reliability). Convergent and known-groups validity and responsiveness were assessed using global assessments of influenza severity and return to usual health. Of the 536 patients enrolled, 221 influenza-positive subjects comprised the analytical sample. The mean age of the patients was 40.7 years, 60.2% were women, and 59.7% were white. The final 32-item measure has six factors/domains (nose, throat, eyes, chest/respiratory, gastrointestinal, and body/systemic), with a higher order factor representing symptom severity overall (comparative fit index = 0.92; root mean square error of approximation = 0.06). Cronbach α was high (total = 0.92; domain range = 0.71-0.87); test-retest reliability (intraclass correlation coefficient, day 1-day 2) was 0.83 for total scores and 0.57 to 0.79 for domains. Day 1 FLU-PRO domain and total scores were moderately to highly correlated (≥0.30) with Patient Global Rating of Flu Severity (except nose and throat). Consistent with known-groups validity, scores differentiated severity groups on the basis of global rating (total: F = 57.2, P < 0.001; domains: F = 8.9-67.5, P < 0.001). Subjects reporting return to usual health showed significantly greater (P < 0.05) FLU-PRO score improvement by day 7 than did those who did not, suggesting score responsiveness. Results suggest that FLU-PRO scores are reliable, valid, and

Multicollinearity in prognostic factor analyses using the EORTC QLQ-C30: identification and impact on model selection.

PubMed

Van Steen, Kristel; Curran, Desmond; Kramer, Jocelyn; Molenberghs, Geert; Van Vreckem, Ann; Bottomley, Andrew; Sylvester, Richard

2002-12-30

Clinical and quality of life (QL) variables from an EORTC clinical trial of first line chemotherapy in advanced breast cancer were used in a prognostic factor analysis of survival and response to chemotherapy. For response, different final multivariate models were obtained from forward and backward selection methods, suggesting a disconcerting instability. Quality of life was measured using the EORTC QLQ-C30 questionnaire completed by patients. Subscales on the questionnaire are known to be highly correlated, and therefore it was hypothesized that multicollinearity contributed to model instability. A correlation matrix indicated that global QL was highly correlated with 7 out of 11 variables. In a first attempt to explore multicollinearity, we used global QL as dependent variable in a regression model with other QL subscales as predictors. Afterwards, standard diagnostic tests for multicollinearity were performed. An exploratory principal components analysis and factor analysis of the QL subscales identified at most three important components and indicated that inclusion of global QL made minimal difference to the loadings on each component, suggesting that it is redundant in the model. In a second approach, we advocate a bootstrap technique to assess the stability of the models. Based on these analyses and since global QL exacerbates problems of multicollinearity, we therefore recommend that global QL be excluded from prognostic factor analyses using the QLQ-C30. The prognostic factor analysis was rerun without global QL in the model, and selected the same significant prognostic factors as before. Copyright 2002 John Wiley & Sons, Ltd.

UMTS signal measurements with digital spectrum analysers.

PubMed

Licitra, G; Palazzuoli, D; Ricci, A S; Silvi, A M

2004-01-01

The launch of the Universal Mobile Telecommunications System (UMTS), the most recent mobile telecommunications standard has imposed the requirement of updating measurement instrumentation and methodologies. In order to define the most reliable measurement procedure, which is aimed at assessing the exposure to electromagnetic fields, modern spectrum analysers' features for correct signal characterisation has been reviewed.

Validity and Reliability of the Academic Resilience Scale in Turkish High School

ERIC Educational Resources Information Center

Kapikiran, Sahin

2012-01-01

The present study aims to determine the validity and reliability of the academic resilience scale in Turkish high school. The participances of the study includes 378 high school students in total (192 female and 186 male). A set of analyses were conducted in order to determine the validity and reliability of the study. Firstly, both exploratory…

Reliability analysis of airship remote sensing system

NASA Astrophysics Data System (ADS)

Qin, Jun

1998-08-01

Airship Remote Sensing System (ARSS) for obtain the dynamic or real time images in the remote sensing of the catastrophe and the environment, is a mixed complex system. Its sensor platform is a remote control airship. The achievement of a remote sensing mission depends on a series of factors. For this reason, it is very important for us to analyze reliability of ARSS. In first place, the system model was simplified form multi-stage system to two-state system on the basis of the result of the failure mode and effect analysis and the failure tree failure mode effect and criticality analysis. The failure tree was created after analyzing all factors and their interrelations. This failure tree includes four branches, e.g. engine subsystem, remote control subsystem, airship construction subsystem, flying metrology and climate subsystem. By way of failure tree analysis and basic-events classing, the weak links were discovered. The result of test running shown no difference in comparison with theory analysis. In accordance with the above conclusions, a plan of the reliability growth and reliability maintenance were posed. System's reliability are raised from 89 percent to 92 percent with the reformation of the man-machine interactive interface, the augmentation of the secondary better-groupie and the secondary remote control equipment.

Reliability of Growth Indicators and Efficiency of Functional Treatment for Skeletal Class II Malocclusion: Current Evidence and Controversies.

PubMed

Perinetti, Giuseppe; Contardo, Luca

2017-01-01

Current evidence on the reliability of growth indicators in the identification of the pubertal growth spurt and efficiency of functional treatment for skeletal Class II malocclusion, the timing of which relies on such indicators, is highly controversial. Regarding growth indicators, the hand and wrist (including the sole middle phalanx of the third finger) maturation method and the standing height recording appear to be most reliable. Other methods are subjected to controversies or were showed to be unreliable. Main sources of controversies include use of single stages instead of ossification events and diagnostic reliability conjecturally based on correlation analyses. Regarding evidence on the efficiency of functional treatment, when treated during the pubertal growth spurt, more favorable response is seen in skeletal Class II patients even though large individual responsiveness remains. Main sources of controversies include design of clinical trials, definition of Class II malocclusion, and lack of inclusion of skeletal maturity among the prognostic factors. While no growth indicator may be considered to have a full diagnostic reliability in the identification of the pubertal growth spurt, their use may still be recommended for increasing efficiency of functional treatment for skeletal Class II malocclusion.

Reliability of Growth Indicators and Efficiency of Functional Treatment for Skeletal Class II Malocclusion: Current Evidence and Controversies

PubMed Central

2017-01-01

Current evidence on the reliability of growth indicators in the identification of the pubertal growth spurt and efficiency of functional treatment for skeletal Class II malocclusion, the timing of which relies on such indicators, is highly controversial. Regarding growth indicators, the hand and wrist (including the sole middle phalanx of the third finger) maturation method and the standing height recording appear to be most reliable. Other methods are subjected to controversies or were showed to be unreliable. Main sources of controversies include use of single stages instead of ossification events and diagnostic reliability conjecturally based on correlation analyses. Regarding evidence on the efficiency of functional treatment, when treated during the pubertal growth spurt, more favorable response is seen in skeletal Class II patients even though large individual responsiveness remains. Main sources of controversies include design of clinical trials, definition of Class II malocclusion, and lack of inclusion of skeletal maturity among the prognostic factors. While no growth indicator may be considered to have a full diagnostic reliability in the identification of the pubertal growth spurt, their use may still be recommended for increasing efficiency of functional treatment for skeletal Class II malocclusion. PMID:28168195

Reliability, precision, and measurement in the context of data from ability tests, surveys, and assessments

NASA Astrophysics Data System (ADS)

Fisher, W. P., Jr.; Elbaum, B.; Coulter, A.

2010-07-01

Reliability coefficients indicate the proportion of total variance attributable to differences among measures separated along a quantitative continuum by a testing, survey, or assessment instrument. Reliability is usually considered to be influenced by both the internal consistency of a data set and the number of items, though textbooks and research papers rarely evaluate the extent to which these factors independently affect the data in question. Probabilistic formulations of the requirements for unidimensional measurement separate consistency from error by modelling individual response processes instead of group-level variation. The utility of this separation is illustrated via analyses of small sets of simulated data, and of subsets of data from a 78-item survey of over 2,500 parents of children with disabilities. Measurement reliability ultimately concerns the structural invariance specified in models requiring sufficient statistics, parameter separation, unidimensionality, and other qualities that historically have made quantification simple, practical, and convenient for end users. The paper concludes with suggestions for a research program aimed at focusing measurement research more on the calibration and wide dissemination of tools applicable to individuals, and less on the statistical study of inter-variable relations in large data sets.

Reliability, Validity, and Cross-Cultural Adaptation of the Turkish Version of the Bournemouth Questionnaire.

PubMed

Gunaydin, Gurkan; Citaker, Seyit; Meray, Jale; Cobanoglu, Gamze; Gunaydin, Ozge Ece; Hazar Kanik, Zeynep

2016-11-01

Validation of a self-report questionnaire. The purpose of this study was to investigate adaptation, validity, and reliability of the Turkish version of the Bournemouth Questionnaire. Low back pain is one of the most frequent disorders leading to activity limitation. This pain affects most of people in their lives. The most important point to evaluate patient's functional abilities and to decide a successful therapy procedure is to manage the assessment questionnaires precisely. One hundred ten patients with chronic low back pain were included in present study. To assess reliability, test-retest and internal consistency analyses were applied. The results of test-retest analysis were assessed by using Intraclass Correlation Coefficient method (95% confidence interval). For internal consistency, Cronbach alpha value was calculated. Validity of the questionnaire was assessed in terms of construct validity. For construct validity, factor analysis and convergent validity were tested. For convergent validity, total points of the Bournemouth Questionnaire were assessed with the total points of Quebec Back Pain Disability Scale and Roland Morris Disability Questionnaire by using Pearson correlation coefficient analysis. Cronbach alpha value was found 0.914, showing that this questionnaire has high internal consistency. The results of test-retest analysis were varying between 0.851 and 0.927, which shows that test-retest results are highly correlated. Factor analysis test indicated that this questionnaire had one factor. Pearson correlation coefficient of the Bournemouth Questionnaire with Roland Morris Disability Questionnaire was calculated 0.703 and it was found with Quebec Back Pain Disability Scale is 0.659. These results showed that the Bournemouth Questionnaire is very good correlated with Roland Morris Disability Questionnaire and Quebec Back Pain Disability Scale. The Turkish version of the Bournemouth Questionnaire is valid and reliable. 3.

Two-year Test-Retest Reliability in High School Athletes Using the Four- and Two-Factor ImPACT Composite Structures: The Effects of Learning Disorders and Headache/Migraine Treatment History.

PubMed

Brett, Benjamin L; Solomon, Gary S; Hill, Jennifer; Schatz, Philip

2018-03-01

This study examined the test-retest reliability of the four- and two-factor structures (i.e., Memory and Speed) of ImPACT over a 2-year interval across multiple groups with premorbid conditions, including those with a history of special education or learning disorders (LD; n = 114), treatment history for headache/migraine (n = 81), and a control group (n = 792). Nine hundred and eighty seven high school athletes completed baseline testing using online ImPACT across a 2-year interval. Paired-samples t-tests documented improvement from initial to follow-up assessments. Test stability was examined using Regression-based measures (RBM) and Reliable change indices (RCI). Reliability was examined using intraclass correlation coefficients (ICC). Significant improvement on all four composites were observed for the control group over a 2-year interval; whereas significant differences were observed only on Visual Motor Speed for the LD and headache/migraine treatment history groups. ICCs ranges were similar across groups and greater or comparable reliability was observed for the two-factor structure on Memory (0.67-0.73) and Speed (0.76-0.78) composites. RCIs and RBMs demonstrated stability for the four- and two-factor structures, with few cases falling outside the range of expected change within a healthy sample at the 90% and 95% CIs. Typical practices of obtaining new baselines every 2 years in the high school population can be applied to athletes with a history of special education or LD and headache/migraine treatment. The two-factor structure has potential to increase test-retest reliability. Further research regarding clinical utility is needed. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Validity and reliability of self-reported arthritis: Georgia senior centers, 2000-2001.

PubMed

Bombard, Jennifer M; Powell, Kenneth E; Martin, Linda M; Helmick, Charles G; Wilson, William H

2005-04-01

Arthritis and other rheumatic conditions are a common cause of disability among adults in the United States. Telephone interviews of the state-based Behavioral Risk Factor Surveillance System (BRFSS) are used by states and territories to estimate the prevalence of arthritis. The purpose of this study was to assess the validity and reliability of the 1996-2001 BRFSS arthritis case definition in a senior center population. A total of 487 respondents at selected senior centers in Georgia were surveyed by telephone, evaluated 3 to 4 weeks later by board-certified rheumatologists, and completed a written survey in 2000 to 2001. Using the rheumatologists' summary assessment "Does this person have arthritis or a related condition" as the standard, the sensitivity and specificity of the BRFSS arthritis case definitions were calculated. Reliability for the BRFSS arthritis case definition was also calculated by comparing responses to the telephone survey with responses to a written survey. Sensitivity was 70.8% (95% confidence interval [CI]=65.9-75.6), and the specificity was 70.3% (95% CI=62.9-77.8). The agreement between the telephone and written responses indicating self-reported arthritis was high (kappa=0.68). Analyses were conducted in 2002 to 2004. Self-reported arthritis in the 1996-2001 BRFSS was highly reliable, and moderately sensitive and specific among these senior center participants.

Reliability of temporal summation and diffuse noxious inhibitory control

PubMed Central

Cathcart, Stuart; Winefield, Anthony H; Rolan, Paul; Lushington, Kurt

2009-01-01

BACKGROUND: The test-retest reliability of temporal summation (TS) and diffuse noxious inhibitory control (DNIC) has not been reported to date. Establishing such reliability would support the possibility of future experimental studies examining factors affecting TS and DNIC. Similarly, the use of manual algometry to induce TS, or an occlusion cuff to induce DNIC of TS to mechanical stimuli, has not been reported to date. Such devices may offer a simpler method than current techniques for inducing TS and DNIC, affording assessment at more anatomical locations and in more varied research settings. METHOD: The present study assessed the test-retest reliability of TS and DNIC using the above techniques. Sex differences on these measures were also investigated. RESULTS: Repeated measures ANOVA indicated successful induction of TS and DNIC, with no significant differences across test-retest occasions. Sex effects were not significant for any measure or interaction. Intraclass correlations indicated high test-retest reliability for all measures; however, there was large interindividual variation between test and retest measurements. CONCLUSION: The present results indicate acceptable within-session test-retest reliability of TS and DNIC. The results support the possibility of future experimental studies examining factors affecting TS and DNIC. PMID:20011713

Attention-deficit/hyperactivity disorder dimensionality: the reliable 'g' and the elusive 's' dimensions.

PubMed

Wagner, Flávia; Martel, Michelle M; Cogo-Moreira, Hugo; Maia, Carlos Renato Moreira; Pan, Pedro Mario; Rohde, Luis Augusto; Salum, Giovanni Abrahão

2016-01-01

The best structural model for attention-deficit/hyperactivity disorder (ADHD) symptoms remains a matter of debate. The objective of this study is to test the fit and factor reliability of competing models of the dimensional structure of ADHD symptoms in a sample of randomly selected and high-risk children and pre-adolescents from Brazil. Our sample comprised 2512 children aged 6-12 years from 57 schools in Brazil. The ADHD symptoms were assessed using parent report on the development and well-being assessment (DAWBA). Fit indexes from confirmatory factor analysis were used to test unidimensional, correlated, and bifactor models of ADHD, the latter including "g" ADHD and "s" symptom domain factors. Reliability of all models was measured with omega coefficients. A bifactor model with one general factor and three specific factors (inattention, hyperactivity, impulsivity) exhibited the best fit to the data, according to fit indices, as well as the most consistent factor loadings. However, based on omega reliability statistics, the specific inattention, hyperactivity, and impulsivity dimensions provided very little reliable information after accounting for the reliable general ADHD factor. Our study presents some psychometric evidence that ADHD specific ("s") factors might be unreliable after taking common ("g" factor) variance into account. These results are in accordance with the lack of longitudinal stability among subtypes, the absence of dimension-specific molecular genetic findings and non-specific effects of treatment strategies. Therefore, researchers and clinicians might most effectively rely on the "g" ADHD to characterize ADHD dimensional phenotype, based on currently available symptom items.

On the Simulation-Based Reliability of Complex Emergency Logistics Networks in Post-Accident Rescues.

PubMed

Wang, Wei; Huang, Li; Liang, Xuedong

2018-01-06

This paper investigates the reliability of complex emergency logistics networks, as reliability is crucial to reducing environmental and public health losses in post-accident emergency rescues. Such networks' statistical characteristics are analyzed first. After the connected reliability and evaluation indices for complex emergency logistics networks are effectively defined, simulation analyses of network reliability are conducted under two different attack modes using a particular emergency logistics network as an example. The simulation analyses obtain the varying trends in emergency supply times and the ratio of effective nodes and validates the effects of network characteristics and different types of attacks on network reliability. The results demonstrate that this emergency logistics network is both a small-world and a scale-free network. When facing random attacks, the emergency logistics network steadily changes, whereas it is very fragile when facing selective attacks. Therefore, special attention should be paid to the protection of supply nodes and nodes with high connectivity. The simulation method provides a new tool for studying emergency logistics networks and a reference for similar studies.

On the Simulation-Based Reliability of Complex Emergency Logistics Networks in Post-Accident Rescues

PubMed Central

Wang, Wei; Huang, Li; Liang, Xuedong

2018-01-01

This paper investigates the reliability of complex emergency logistics networks, as reliability is crucial to reducing environmental and public health losses in post-accident emergency rescues. Such networks’ statistical characteristics are analyzed first. After the connected reliability and evaluation indices for complex emergency logistics networks are effectively defined, simulation analyses of network reliability are conducted under two different attack modes using a particular emergency logistics network as an example. The simulation analyses obtain the varying trends in emergency supply times and the ratio of effective nodes and validates the effects of network characteristics and different types of attacks on network reliability. The results demonstrate that this emergency logistics network is both a small-world and a scale-free network. When facing random attacks, the emergency logistics network steadily changes, whereas it is very fragile when facing selective attacks. Therefore, special attention should be paid to the protection of supply nodes and nodes with high connectivity. The simulation method provides a new tool for studying emergency logistics networks and a reference for similar studies. PMID:29316614

Turkish version of the Intuitive Eating Scale-2: Validity and reliability among university students.

PubMed

Bas, Murat; Karaca, Kezban Esen; Saglam, Duygu; Arıtıcı, Gozde; Cengiz, Ecem; Köksal, Selen; Buyukkaragoz, Aylin Hasbay

2017-07-01

Intuitive Eating is defined as "the dynamic process-integrating attunement of mind, body, and food". The purpose of this study was, therefore, adapt the IES-2 to the Turkish language and reliability and validity of IES-2 among Turkish populations. We also examined the instrument's internal consistency and test-retest reliability and analysed the relationships between the IES-2 and several variables so as to evaluate the convergent and discriminant validity. Three hundred seventy-seven undergraduate and postgraduate women and men between the ages of 19-31 years (mean 22.3, SD = 3.53) attending two large private universities in Istanbul, Turkey. The best solution from the principal factors analysis of the 23 items of the IES-2 revealed four factors corresponding to the four subscales (F1: Eating for physical rather than emotional reasons; F2: Unconditional permission to eat; F3: Reliance on hunger and satiety cues; F4: Body-food choice congruence), as reported by the authors of the questionnaire. Bartlett's test of sphericity gave X 2  = 9043.49 (p < 0.001), while the Kaiser-Meyer-Olkin index was 0.87 (KMO were 0.89 for women and 0.83 for men). The test-retest reliability of the IES-2 was 0.88 for the IES-2 total score. The IES-2 had a = 0.82. These findings support the notion that intuitive eating is a viable concept for university students and the IES can be used to examine adaptive eating behaviors in this population. Copyright © 2017. Published by Elsevier Ltd.

Factor structure and internal reliability of an exercise health belief model scale in a Mexican population.

PubMed

Villar, Oscar Armando Esparza-Del; Montañez-Alvarado, Priscila; Gutiérrez-Vega, Marisela; Carrillo-Saucedo, Irene Concepción; Gurrola-Peña, Gloria Margarita; Ruvalcaba-Romero, Norma Alicia; García-Sánchez, María Dolores; Ochoa-Alcaraz, Sergio Gabriel

2017-03-01

Mexico is one of the countries with the highest rates of overweight and obesity around the world, with 68.8% of men and 73% of women reporting both. This is a public health problem since there are several health related consequences of not exercising, like having cardiovascular diseases or some types of cancers. All of these problems can be prevented by promoting exercise, so it is important to evaluate models of health behaviors to achieve this goal. Among several models the Health Belief Model is one of the most studied models to promote health related behaviors. This study validates the first exercise scale based on the Health Belief Model (HBM) in Mexicans with the objective of studying and analyzing this model in Mexico. Items for the scale called the Exercise Health Belief Model Scale (EHBMS) were developed by a health research team, then the items were applied to a sample of 746 participants, male and female, from five cities in Mexico. The factor structure of the items was analyzed with an exploratory factor analysis and the internal reliability with Cronbach's alpha. The exploratory factor analysis reported the expected factor structure based in the HBM. The KMO index (0.92) and the Barlett's sphericity test (p < 0.01) indicated an adequate and normally distributed sample. Items had adequate factor loadings, ranging from 0.31 to 0.92, and the internal consistencies of the factors were also acceptable, with alpha values ranging from 0.67 to 0.91. The EHBMS is a validated scale that can be used to measure exercise based on the HBM in Mexican populations.

Reliability and validity of the Japanese version of the Resilience Scale and its short version.

PubMed

Nishi, Daisuke; Uehara, Ritei; Kondo, Maki; Matsuoka, Yutaka

2010-11-17

The clinical relevance of resilience has received considerable attention in recent years. The aim of this study is to demonstrate the reliability and validity of the Japanese version of the Resilience Scale (RS) and short version of the RS (RS-14). The original English version of RS was translated to Japanese and the Japanese version was confirmed by back-translation. Participants were 430 nursing and university psychology students. The RS, Center for Epidemiologic Studies Depression Scale (CES-D), Rosenberg Self-Esteem Scale (RSES), Social Support Questionnaire (SSQ), Perceived Stress Scale (PSS), and Sheehan Disability Scale (SDS) were administered. Internal consistency, convergent validity and factor loadings were assessed at initial assessment. Test-retest reliability was assessed using data collected from 107 students at 3 months after baseline. Mean score on the RS was 111.19. Cronbach's alpha coefficients for the RS and RS-14 were 0.90 and 0.88, respectively. The test-retest correlation coefficients for the RS and RS-14 were 0.83 and 0.84, respectively. Both the RS and RS-14 were negatively correlated with the CES-D and SDS, and positively correlated with the RSES, SSQ and PSS (all p < 0.05), although the correlation between the RS and CES-D was somewhat lower than that in previous studies. Factor analyses indicated a one-factor solution for RS-14, but as for RS, the result was not consistent with previous studies. This study demonstrates that the Japanese version of RS has psychometric properties with high degrees of internal consistency, high test-retest reliability, and relatively low concurrent validity. RS-14 was equivalent to the RS in internal consistency, test-retest reliability, and concurrent validity. Low scores on the RS, a positive correlation between the RS and perceived stress, and a relatively low correlation between the RS and depressive symptoms in this study suggest that validity of the Japanese version of the RS might be relatively low

[Evaluation of the reliability of freight elevator operators].

PubMed

Gosk, A; Borodulin-Nadzieja, L; Janocha, A; Salomon, E

1991-01-01

The study involved 58 workers employed at winding machines. Their reliability was estimated from the results of psychomotoric test precision, condition of the vegetative nervous system, and from the results of psychological tests. The tests were carried out at the laboratory and at the workplaces, with all distractive factors and functional connection of the work process present. We have found that the reliability of the workers may be affected by a variety of factors. Among the winding machine operators, work monotony can lead to "monotony syndrome". Among the signalists , the appreciation of great responsibility can lead to unpredictable and non-adequate reactions. From both groups, persons displaying a lower-than-average precision were isolated. All those persons demonstrated a reckless attitude and the opinion of their superiors about them was poor. Those persons constitute potential risk for the reliable operation of the discussed team.

Measurement of factors that negatively influence the outcome of quitting smoking among patients with COPD: psychometric analyses of the Try To Quit Smoking instrument.

PubMed

Lundh, Lena; Alinaghizadeh, Hassan; Törnkvist, Lena; Gilljam, Hans; Galanti, Maria Rosaria

2014-12-01

To test internal consistency and factor structure of a brief instrument called Trying to Quit smoking. The most effective treatment for patients with chronic obstructive pulmonary disease is to quit smoking. Constant thoughts about quitting and repeated quit attempts can generate destructive feelings and make it more difficult to quit. Development and psychometric testing of the Trying to Quit smoking scale. The Trying to Quit smoking, an instrument designed to assess pressure-filled states of mind and corresponding pressure-relief strategies, was tested among 63 Swedish patients with chronic obstructive pulmonary disease. Among these, the psychometric properties of the instrument were analysed by Exploratory Factor Analyses. Fourteen items were included in the factor analyses, loading on three factors labelled: (1) development of pressure-filled mental states; (2) use of destructive pressure-relief strategies; and (3) ambivalent thoughts when trying to quit smoking. These three factors accounted for more than 80% of the variance, performed well on the Kaiser-Meyer-Olkin (KMO) test and had high internal consistency.

[Study of the relationship between human quality and reliability].

PubMed

Long, S; Wang, C; Wang, L i; Yuan, J; Liu, H; Jiao, X

1997-02-01

To clarify the relationship between human quality and reliability, 1925 experiments in 20 subjects were carried out to study the relationship between disposition character, digital memory, graphic memory, multi-reaction time and education level and simulated aircraft operation. Meanwhile, effects of task difficulty and enviromental factor on human reliability were also studied. The results showed that human quality can be predicted and evaluated through experimental methods. The better the human quality, the higher the human reliability.

Reliability and Validity of Assessing User Satisfaction With Web-Based Health Interventions

PubMed Central

Lehr, Dirk; Reis, Dorota; Vis, Christiaan; Riper, Heleen; Berking, Matthias; Ebert, David Daniel

2016-01-01

Background The perspective of users should be taken into account in the evaluation of Web-based health interventions. Assessing the users’ satisfaction with the intervention they receive could enhance the evidence for the intervention effects. Thus, there is a need for valid and reliable measures to assess satisfaction with Web-based health interventions. Objective The objective of this study was to analyze the reliability, factorial structure, and construct validity of the Client Satisfaction Questionnaire adapted to Internet-based interventions (CSQ-I). Methods The psychometric quality of the CSQ-I was analyzed in user samples from 2 separate randomized controlled trials evaluating Web-based health interventions, one from a depression prevention intervention (sample 1, N=174) and the other from a stress management intervention (sample 2, N=111). At first, the underlying measurement model of the CSQ-I was analyzed to determine the internal consistency. The factorial structure of the scale and the measurement invariance across groups were tested by multigroup confirmatory factor analyses. Additionally, the construct validity of the scale was examined by comparing satisfaction scores with the primary clinical outcome. Results Multigroup confirmatory analyses on the scale yielded a one-factorial structure with a good fit (root-mean-square error of approximation =.09, comparative fit index =.96, standardized root-mean-square residual =.05) that showed partial strong invariance across the 2 samples. The scale showed very good reliability, indicated by McDonald omegas of .95 in sample 1 and .93 in sample 2. Significant correlations with change in depressive symptoms (r=−.35, P<.001) and perceived stress (r=−.48, P<.001) demonstrated the construct validity of the scale. Conclusions The proven internal consistency, factorial structure, and construct validity of the CSQ-I indicate a good overall psychometric quality of the measure to assess the user’s general

The Psychometric Properties of the Center for Epidemiologic Studies Depression Scale in Chinese Primary Care Patients: Factor Structure, Construct Validity, Reliability, Sensitivity and Responsiveness

PubMed Central

2015-01-01

Background The Center for Epidemiologic Studies Depression Scale (CES-D) is a commonly used instrument to measure depressive symptomatology. Despite this, the evidence for its psychometric properties remains poorly established in Chinese populations. The aim of this study was to validate the use of the CES-D in Chinese primary care patients by examining factor structure, construct validity, reliability, sensitivity and responsiveness. Methods and Results The psychometric properties were assessed amongst a sample of 3686 Chinese adult primary care patients in Hong Kong. Three competing factor structure models were examined using confirmatory factor analysis. The original CES-D four-structure model had adequate fit, however the data was better fit into a bi-factor model. For the internal construct validity, corrected item-total correlations were 0.4 for most items. The convergent validity was assessed by examining the correlations between the CES-D, the Patient Health Questionnaire 9 (PHQ-9) and the Short Form-12 Health Survey (version 2) Mental Component Summary (SF-12 v2 MCS). The CES-D had a strong correlation with the PHQ-9 (coefficient: 0.78) and SF-12 v2 MCS (coefficient: -0.75). Internal consistency was assessed by McDonald’s omega hierarchical (ωH). The ωH value for the general depression factor was 0.855. The ωH values for “somatic”, “depressed affect”, “positive affect” and “interpersonal problems” were 0.434, 0.038, 0.738 and 0.730, respectively. For the two-week test-retest reliability, the intraclass correlation coefficient was 0.91. The CES-D was sensitive in detecting differences between known groups, with the AUC >0.7. Internal responsiveness of the CES-D to detect positive and negative changes was satisfactory (with p value <0.01 and all effect size statistics >0.2). The CES-D was externally responsive, with the AUC>0.7. Conclusions The CES-D appears to be a valid, reliable, sensitive and responsive instrument for screening and

The Psychometric Properties of the Center for Epidemiologic Studies Depression Scale in Chinese Primary Care Patients: Factor Structure, Construct Validity, Reliability, Sensitivity and Responsiveness.

PubMed

Chin, Weng Yee; Choi, Edmond P H; Chan, Kit T Y; Wong, Carlos K H

2015-01-01

The Center for Epidemiologic Studies Depression Scale (CES-D) is a commonly used instrument to measure depressive symptomatology. Despite this, the evidence for its psychometric properties remains poorly established in Chinese populations. The aim of this study was to validate the use of the CES-D in Chinese primary care patients by examining factor structure, construct validity, reliability, sensitivity and responsiveness. The psychometric properties were assessed amongst a sample of 3686 Chinese adult primary care patients in Hong Kong. Three competing factor structure models were examined using confirmatory factor analysis. The original CES-D four-structure model had adequate fit, however the data was better fit into a bi-factor model. For the internal construct validity, corrected item-total correlations were 0.4 for most items. The convergent validity was assessed by examining the correlations between the CES-D, the Patient Health Questionnaire 9 (PHQ-9) and the Short Form-12 Health Survey (version 2) Mental Component Summary (SF-12 v2 MCS). The CES-D had a strong correlation with the PHQ-9 (coefficient: 0.78) and SF-12 v2 MCS (coefficient: -0.75). Internal consistency was assessed by McDonald's omega hierarchical (ωH). The ωH value for the general depression factor was 0.855. The ωH values for "somatic", "depressed affect", "positive affect" and "interpersonal problems" were 0.434, 0.038, 0.738 and 0.730, respectively. For the two-week test-retest reliability, the intraclass correlation coefficient was 0.91. The CES-D was sensitive in detecting differences between known groups, with the AUC >0.7. Internal responsiveness of the CES-D to detect positive and negative changes was satisfactory (with p value <0.01 and all effect size statistics >0.2). The CES-D was externally responsive, with the AUC>0.7. The CES-D appears to be a valid, reliable, sensitive and responsive instrument for screening and monitoring depressive symptoms in adult Chinese primary care

The Chinese version of the Child and Adolescent Scale of Environment (CASE-C): validity and reliability for children with disabilities in Taiwan.

PubMed

Kang, Lin-Ju; Yen, Chia-Feng; Bedell, Gary; Simeonsson, Rune J; Liou, Tsan-Hon; Chi, Wen-Chou; Liu, Shu-Wen; Liao, Hua-Fang; Hwang, Ai-Wen

2015-03-01

Measurement of children's participation and environmental factors is a key component of the assessment in the new Disability Evaluation System (DES) in Taiwan. The Child and Adolescent Scale of Environment (CASE) was translated into Traditional Chinese (CASE-C) and used for assessing environmental factors affecting the participation of children and youth with disabilities in the DES. The aim of this study was to validate the CASE-C. Participants were 614 children and youth aged 6.0-17.9 years with disabilities, with the largest condition group comprised of children with intellectual disability (61%). Internal structure, internal consistency, test-retest reliability, convergent validity, and discriminant (known group) validity were examined using exploratory factor analyses, Cronbach's α coefficient, intra-class correlation coefficients (ICC), correlation analyses, and univariate ANOVAs. A three-factor structure (Family/Community Resources, Assistance/Attitude Supports, and Physical Design Access) of the CASE-C was produced with 38% variance explained. The CASE-C had adequate internal consistency (Cronbach's α=.74-.86) and test-retest reliability (ICCs=.73-.90). Children and youth with disabilities who had higher levels of severity of impairment encountered more environmental barriers and those experiencing more environmental problems also had greater restrictions in participation. The CASE-C scores were found to distinguish children on the basis of disability condition and impairment severity, but not on the basis of age or sex. The CASE-C is valid for assessing environmental problems experienced by children and youth with disabilities in Taiwan. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Turkish adaptation of scale to measure patient perceptions of the quality of nursing care and related hospital services: A validity and reliability study.

PubMed

Oren, Besey; Zengin, Neriman; Yildiz, Nebahat

2016-01-01

This study aimed to test the validity and reliability of a version of the tool developed in Sri Lanka in 2011 to assess patient perceptions of the quality of nursing care and related hospital services created for use with Turkish patients. This methodological study was conducted between November 2013 and November 2014 after obtaining ethical approval and organizational permission. Data was collected during discharge from 180 adult patients who were hospitalized for at least 3 days at a medical school hospital located in Istanbul. After language validation, validity and reliability analyses of the scale were conducted. Content validity, content validity index (CVI), construct validity, and exploratory factor analysis were assessed and examined, and reliability was tested using the Cronbach's alpha coefficient and item-total correlations. Mean CVI was found to be 0.95, which is above expected value. Exploratory factor analysis revealed 4 factors with eigenvalues above 1, which explained 82.4% of total variance in the Turkish version of the tool to measure patient perceptions of nursing care and other hospital services. Factor loading for each item was ≥.40. Cronbach's alpha coefficient of sub-dimensions and total scale were found to be 0.84-0.98 and 0.98, respectively. Item-total correlations ranged from 0.56 to 0.83 for the entire group, which was above expected values. The Turkish version of the scale to assess patient perceptions of the quality of nursing care and related hospital services, which comprised 4 sub-dimensions and 36 items, was found to be valid and reliable for use with the Turkish population.

47 CFR 12.3 - 911 and E911 analyses and reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false 911 and E911 analyses and reports. 12.3 Section... RELIABILITY OF COMMUNICATIONS § 12.3 911 and E911 analyses and reports. The following entities must analyze their 911 and E911 networks and/or systems and provide a detailed report to the Commission on the...

Validity and Reliability of Turkish Male Breast Self-Examination Instrument.

PubMed

Erkin, Özüm; Göl, İlknur

2018-04-01

This study aims to measure the validity and reliability of Turkish male breast self-examination (MBSE) instrument. The methodological study was performed in 2016 at Ege University, Faculty of Nursing, İzmir, Turkey. The MBSE includes ten steps. For validity studies, face validity, content validity, and construct validity (exploratory factor analysis) were done. For reliability study, Kuder Richardson was calculated. The content validity index was found to be 0.94. Kendall W coefficient was 0.80 (p=0.551). The total variance explained by the two factors was found to be 63.24%. Kuder Richardson 21 was done for reliability study and found to be 0.97 for the instrument. The final instrument included 10 steps and two stages. The Turkish version of MBSE is a valid and reliable instrument for early diagnose. The MBSE can be used in Turkish speaking countries and cultures with two stages and 10 steps.

The Disgust Scale: Item Analysis, Factor Structure, and Suggestions for Refinement

ERIC Educational Resources Information Center

Olatunji, Bunmi O.; Williams, Nathan L.; Tolin, David F.; Abramowitz, Jonathan S.; Sawchuk, Craig N.; Lohr, Jeffrey M.; Elwood, Lisa S.

2007-01-01

In the 4 studies presented (N = 1,939), a converging set of analyses was conducted to evaluate the item adequacy, factor structure, reliability, and validity of the Disgust Scale (DS; J. Haidt, C. McCauley, & P. Rozin, 1994). The results suggest that 7 items (i.e., Items 2, 7, 8, 21, 23, 24, and 25) should be considered for removal from the DS.…

Alcohol consumption as a risk factor for tuberculosis: meta-analyses and burden of disease

PubMed Central

Shield, Kevin D.; Roerecke, Michael; Samokhvalov, Andriy V.; Lönnroth, Knut; Rehm, Jürgen

2017-01-01

Meta-analyses of alcohol use, alcohol dosage and alcohol-related problems as risk factors for tuberculosis incidence were undertaken. The global alcohol-attributable tuberculosis burden of disease was also re-estimated. Systematic searches were conducted, reference lists were reviewed and expert consultations were held to identify studies. Cohort and case-control studies were included if there were no temporal violations of exposure and outcome. Risk relations (RRs) were pooled by using categorical and dose-response meta-analyses. The alcohol-attributable tuberculosis burden of disease was estimated by using alcohol-attributable fractions. 36 of 1108 studies were included. RRs for alcohol use and alcohol-related problems were 1.35 (95% CI 1.09–1.68; I2: 83%) and 3.33 (95% CI 2.14–5.19; 87%), respectively. Concerning alcohol dosage, tuberculosis risk rose as ethanol intake increased, with evidence of a threshold effect. Alcohol consumption caused 22.02 incident cases (95% CI 19.70–40.77) and 2.35 deaths (95% CI 2.05–4.79) per 100 000 people from tuberculosis in 2014. Alcohol-attributable tuberculosis incidence increased between 2000 and 2014 in most high tuberculosis burden countries, whereas mortality decreased. Alcohol consumption was associated with an increased risk of tuberculosis in all meta-analyses. It was consequently a major contributor to the tuberculosis burden of disease. PMID:28705945

Surveying the factor structure and reliability of the Persian version of the Jefferson Scale of Physician Lifelong Learning (JeffSPLL) in staff of medical sciences.

PubMed

Karimi, Fatemeh Zahra; Alesheikh, Aytay; Pakravan, Soheila; Abdollahi, Mahbubeh; Damough, Mozhdeh; Anbaran, Zahra Khosravi; Farahani, Leila Amiri

2017-10-01

In medical sciences, commitment to lifelong learning has been expressed as an important element. Today, due to the rapid development of medical information and technology, lifelong learning is critical for safe medical care and development in medical research. JeffSPLL is one of the scales for measuring lifelong learning among the staff of medical sciences that has never been used in Iran. The aim of the present study was to determine the factor structure and reliability of the Persian version of JeffSPLL among Persian-speaking staff of universities of medical sciences in Iran. This study was a cross-sectional study, methodologically, that was conducted in 2012-2013. In this study, 210 staff members of Birjand University of Medical Sciences were selected. Data collection tool was the Persian version of JeffSPLL. To investigate the factor structure of this tool, confirmatory factor analysis was used and to evaluate the model fit, goodness-of-fit indices, root mean square error of approximation (RMSEA), the ratio of chi-square to the degree of freedom associated with it, comparative fit index (CFI), and root mean square residual (RMR) were used. To investigate the reliability of tool, Cronbach's alpha was employed. Data analysis was conducted using LISREL8.8 and SPSS 20 software. Confirmatory factor analysis showed that RMSEA was close to 0.1, and CFI and GFI were close to one. Therefore, four-factor model was appropriate. Cronbach's alpha was 0.92 for the whole tool and it was between 0.82 and 0.89 for subscales. The present study verified the four-factor structure of the 19-item Persian version of JeffSPLL that included professional learning beliefs and motivation, scholarly activities, attention to learning opportunities, and technical skills in information seeking among the staff. In addition, this tool has acceptable reliability. Therefore, it was appropriate to assess lifelong learning in the Persian-speaking staff population.

Confirmatory Factor Analysis of the Malay Version of the Confusion, Hubbub and Order Scale (CHAOS-6) among Myocardial Infarction Survivors in a Malaysian Cardiac Healthcare Facility.

PubMed

Ganasegeran, Kurubaran; Selvaraj, Kamaraj; Rashid, Abdul

2017-08-01

The six item Confusion, Hubbub and Order Scale (CHAOS-6) has been validated as a reliable tool to measure levels of household disorder. We aimed to investigate the goodness of fit and reliability of a new Malay version of the CHAOS-6. The original English version of the CHAOS-6 underwent forward-backward translation into the Malay language. The finalised Malay version was administered to 105 myocardial infarction survivors in a Malaysian cardiac health facility. We performed confirmatory factor analyses (CFAs) using structural equation modelling. A path diagram and fit statistics were yielded to determine the Malay version's validity. Composite reliability was tested to determine the scale's reliability. All 105 myocardial infarction survivors participated in the study. The CFA yielded a six-item, one-factor model with excellent fit statistics. Composite reliability for the single factor CHAOS-6 was 0.65, confirming that the scale is reliable for Malay speakers. The Malay version of the CHAOS-6 was reliable and showed the best fit statistics for our study sample. We thus offer a simple, brief, validated, reliable and novel instrument to measure chaos, the Skala Kecelaruan, Keriuhan & Tertib Terubahsuai (CHAOS-6) , for the Malaysian population.

Reliability of four models for clinical gait analysis.

PubMed

Kainz, Hans; Graham, David; Edwards, Julie; Walsh, Henry P J; Maine, Sheanna; Boyd, Roslyn N; Lloyd, David G; Modenese, Luca; Carty, Christopher P

2017-05-01

Three-dimensional gait analysis (3DGA) has become a common clinical tool for treatment planning in children with cerebral palsy (CP). Many clinical gait laboratories use the conventional gait analysis model (e.g. Plug-in-Gait model), which uses Direct Kinematics (DK) for joint kinematic calculations, whereas, musculoskeletal models, mainly used for research, use Inverse Kinematics (IK). Musculoskeletal IK models have the advantage of enabling additional analyses which might improve the clinical decision-making in children with CP. Before any new model can be used in a clinical setting, its reliability has to be evaluated and compared to a commonly used clinical gait model (e.g. Plug-in-Gait model) which was the purpose of this study. Two testers performed 3DGA in eleven CP and seven typically developing participants on two occasions. Intra- and inter-tester standard deviations (SD) and standard error of measurement (SEM) were used to compare the reliability of two DK models (Plug-in-Gait and a six degrees-of-freedom model solved using Vicon software) and two IK models (two modifications of 'gait2392' solved using OpenSim). All models showed good reliability (mean SEM of 3.0° over all analysed models and joint angles). Variations in joint kinetics were less in typically developed than in CP participants. The modified 'gait2392' model which included all the joint rotations commonly reported in clinical 3DGA, showed reasonable reliable joint kinematic and kinetic estimates, and allows additional musculoskeletal analysis on surgically adjustable parameters, e.g. muscle-tendon lengths, and, therefore, is a suitable model for clinical gait analysis. Copyright © 2017. Published by Elsevier B.V.

Reliability and economy -- Hydro electricity for Iran

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jahromi-Shirazi, M.J.; Zarbakhsh, M.H.

1998-12-31

Reliability is the probability that a device or system will perform its function adequately, for the period of time intended, under the operating conditions intended. Reliability and economy are two important factors in operating any system, especially in power generation. Due to the high rate in population growth in Iran, the experts have estimated that the demand for electricity will be about 63,000 MW in the next 25 years, the installed power is now about 26,000 MW. Therefore, the energy policy decision made in Iran is to go to power generation by hydroelectric plants because of reliability, availability of watermore » resources and the economics of hydroelectric power.« less

Predicting Cost/Reliability/Maintainability of Advanced General Aviation Avionics Equipment

NASA Technical Reports Server (NTRS)

Davis, M. R.; Kamins, M.; Mooz, W. E.

1978-01-01

A methodology is provided for assisting NASA in estimating the cost, reliability, and maintenance (CRM) requirements for general avionics equipment operating in the 1980's. Practical problems of predicting these factors are examined. The usefulness and short comings of different approaches for modeling coast and reliability estimates are discussed together with special problems caused by the lack of historical data on the cost of maintaining general aviation avionics. Suggestions are offered on how NASA might proceed in assessing cost reliability CRM implications in the absence of reliable generalized predictive models.

Measuring teacher self-report on classroom practices: Construct validity and reliability of the Classroom Strategies Scale-Teacher Form.

PubMed

Reddy, Linda A; Dudek, Christopher M; Fabiano, Gregory A; Peters, Stephanie

2015-12-01

This article presents information about the construct validity and reliability of a new teacher self-report measure of classroom instructional and behavioral practices (the Classroom Strategies Scales-Teacher Form; CSS-T). The theoretical underpinnings and empirical basis for the instructional and behavioral management scales are presented. Information is provided about the construct validity, internal consistency, test-retest reliability, and freedom from item-bias of the scales. Given previous investigations with the CSS Observer Form, it was hypothesized that internal consistency would be adequate and that confirmatory factor analyses (CFA) of CSS-T data from 293 classrooms would offer empirical support for the CSS-T's Total, Composite and subscales, and yield a similar factor structure to that of the CSS Observer Form. Goodness-of-fit indices of χ2/df, Root Mean Square Error of Approximation, Goodness of Fit Index, and Adjusted Goodness of Fit Index suggested satisfactory fit of proposed CFA models whereas the Comparative Fit Index did not. Internal consistency estimates of .93 and .94 were obtained for the Instructional Strategies and Behavioral Strategies Total scales respectively. Adequate test-retest reliability was found for instructional and behavioral total scales (r = .79, r = .84, percent agreement 93% and 93%). The CSS-T evidences freedom from item bias on important teacher demographics (age, educational degree, and years of teaching experience). Implications of results are discussed. (c) 2015 APA, all rights reserved).

Dimensionality of posttraumatic stress disorder symptoms in children exposed to disaster: results from confirmatory factor analyses.

PubMed

Anthony, J L; Lonigan, C J; Hecht, S A

1999-05-01

Factor analytic studies of trauma victims' posttraumatic stress disorder (PTSD) have offered conflicting hypotheses about how to conceptualize PTSD into symptom categories. The present study used confirmatory factor analyses of self-reported PTSD symptomatology from 5,664 child and adolescent victims of Hurricane Hugo to compare 10 models of PTSD dimensionality. PTSD was best represented by a 2nd-order PTSD factor that manifests in 3 symptom clusters (Intrusion/Active Avoidance, Numbing/Passive Avoidance, and Arousal). This model was cross-validated on 3 age groups (late childhood, early adolescence, and late adolescence), and results indicated factorial invariance across groups. PTSD symptoms varied in relative centrality to the underlying dimensions of PTSD, which differed in their relations with anxiety and degree of traumatic exposure. Implications for classification criteria and an empirically supported theory of PTSD are discussed.

Reliability and validity of television food advertising questionnaire in Malaysia.

PubMed

Zalma, Abdul Razak; Safiah, Md Yusof; Ajau, Danis; Khairil Anuar, Md Isa

2015-09-01

Interventions to counter the influence of television food advertising amongst children are important. Thus, reliable and valid instrument to assess its effect is needed. The objective of this study was to determine the reliability and validity of such a questionnaire. The questionnaire was administered twice on 32 primary schoolchildren aged 10-11 years in Selangor, Malaysia. The interval between the first and second administration was 2 weeks. Test-retest method was used to examine the reliability of the questionnaire. Intra-rater reliability was determined by kappa coefficient and internal consistency by Cronbach's alpha coefficient. Construct validity was evaluated using factor analysis. The test-retest correlation showed moderate-to-high reliability for all scores (r = 0.40*, p = 0.02 to r = 0.95**, p = 0.00), with one exception, consumption of fast foods (r = 0.24, p = 0.20). Kappa coefficient showed acceptable-to-strong intra-rater reliability (K = 0.40-0.92), except for two items under knowledge on television food advertising (K = 0.26 and K = 0.21) and one item under preference for healthier foods (K = 0.33). Cronbach's alpha coefficient indicated acceptable internal consistency for all scores (0.45-0.60). After deleting two items under Consumption of Commonly Advertised Food, the items showed moderate-to-high loading (0.52, 0.84, 0.42 and 0.42) with the Scree plot showing that there was only one factor. The Kaiser-Meyer-Olkin was 0.60, showing that the sample was adequate for factor analysis. The questionnaire on television food advertising is reliable and valid to assess the effect of media literacy education on television food advertising on schoolchildren. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Inequality of obesity and socioeconomic factors in Iran: a systematic review and meta- analyses

PubMed Central

Djalalinia, Shirin; Peykari, Niloofar; Qorbani, Mostafa; Larijani, Bagher; Farzadfar, Farshad

2015-01-01

Background: Socioeconomic status and demographic factors, such as education, occupation, place of residence, gender, age, and marital status have been reported to be associated with obesity. We conducted a systematic review to summarize evidences on associations between socioeconomic factors and obesity/overweight in Iranian population. Methods: We systematically searched international databases; ISI, PubMed/Medline, Scopus, and national databases Iran-medex, Irandoc, and Scientific Information Database (SID). We refined data for associations between socioeconomic factors and obesity/overweight by sex, age, province, and year. There were no limitations for time and languages. Results: Based on our search strategy we found 151 records; of them 139 were from international databases and the remaining 12 were obtained from national databases. After removing duplicates, via the refining steps, only 119 articles were found related to our study domains. Extracted results were attributed to 146596 person/data from included studies. Increased ages, low educational levels, being married, residence in urban area, as well as female sex were clearly associated with obesity. Conclusion: Results could be useful for better health policy and more planned studies in this field. These also could be used for future complementary analyses. PMID:26793632

Inequality of obesity and socioeconomic factors in Iran: a systematic review and meta- analyses.

PubMed

Djalalinia, Shirin; Peykari, Niloofar; Qorbani, Mostafa; Larijani, Bagher; Farzadfar, Farshad

2015-01-01

Socioeconomic status and demographic factors, such as education, occupation, place of residence, gender, age, and marital status have been reported to be associated with obesity. We conducted a systematic review to summarize evidences on associations between socioeconomic factors and obesity/overweight in Iranian population. We systematically searched international databases; ISI, PubMed/Medline, Scopus, and national databases Iran-medex, Irandoc, and Scientific Information Database (SID). We refined data for associations between socioeconomic factors and obesity/overweight by sex, age, province, and year. There were no limitations for time and languages. Based on our search strategy we found 151 records; of them 139 were from international databases and the remaining 12 were obtained from national databases. After removing duplicates, via the refining steps, only 119 articles were found related to our study domains. Extracted results were attributed to 146596 person/data from included studies. Increased ages, low educational levels, being married, residence in urban area, as well as female sex were clearly associated with obesity. RESULTS could be useful for better health policy and more planned studies in this field. These also could be used for future complementary analyses.

Parameter Accuracy in Meta-Analyses of Factor Structures

ERIC Educational Resources Information Center

Gnambs, Timo; Staufenbiel, Thomas

2016-01-01

Two new methods for the meta-analysis of factor loadings are introduced and evaluated by Monte Carlo simulations. The direct method pools each factor loading individually, whereas the indirect method synthesizes correlation matrices reproduced from factor loadings. The results of the two simulations demonstrated that the accuracy of…

Analyses of Digman's child-personality data: derivation of Big-Five factor scores from each of six samples.

PubMed

Goldberg, L R

2001-10-01

One of the world's richest collections of teacher descriptions of elementary-school children was obtained by John M. Digman from 1959 to 1967 in schools on two Hawaiian islands. In six phases of data collection, 88 teachers described 2,572 of their students, using one of five different sets of personality variables. The present report provides findings from new analyses of these important data, which have never before been analyzed in a comprehensive manner. When factors developed from carefully selected markers of the Big-Five factor structure were compared to those based on the total set of variables in each sample, the congruence between both types of factors was quite high. Attempts to extend the structure to 6 and 7 factors revealed no other broad factors beyond the Big Five in any of the 6 samples. These robust findings provide significant new evidence for the structure of teacher-based assessments of child personality attributes.

Family strengths and the Kansas Marital Satisfaction Scale: a factor analytic study.

PubMed

Schumm, W R; Bollman, S R; Jurich, A P; Hatch, R C

2001-06-01

20 new items were developed to measure six concepts of family strengths and were administered, along with the Kansas Marital Satisfaction Scale, to over 266 married subjects as part of a larger survey of current and former members of the Christian Church (Disciples of Christ). A common factor analysis suggested that most of the items were associated with their expected factors, while reliability analyses indicated that most of the scales had acceptable estimates of internal consistency. The marital satisfaction items clearly were associated with their own factor and not other factors, providing support for the unidimensional nature of the Kansas Marital Satisfaction Scale and for its construct validity.

Item response theory analysis of the life orientation test-revised: age and gender differential item functioning analyses.

PubMed

Steca, Patrizia; Monzani, Dario; Greco, Andrea; Chiesi, Francesca; Primi, Caterina

2015-06-01

This study is aimed at testing the measurement properties of the Life Orientation Test-Revised (LOT-R) for the assessment of dispositional optimism by employing item response theory (IRT) analyses. The LOT-R was administered to a large sample of 2,862 Italian adults. First, confirmatory factor analyses demonstrated the theoretical conceptualization of the construct measured by the LOT-R as a single bipolar dimension. Subsequently, IRT analyses for polytomous, ordered response category data were applied to investigate the items' properties. The equivalence of the items across gender and age was assessed by analyzing differential item functioning. Discrimination and severity parameters indicated that all items were able to distinguish people with different levels of optimism and adequately covered the spectrum of the latent trait. Additionally, the LOT-R appears to be gender invariant and, with minor exceptions, age invariant. Results provided evidence that the LOT-R is a reliable and valid measure of dispositional optimism. © The Author(s) 2014.

The Validity and Reliability of the Mobbing Scale (MS)

ERIC Educational Resources Information Center

Yaman, Erkan

2009-01-01

The aim of this research is to develop the Mobbing Scale and examine its validity and reliability. The sample of the study consisted of 515 persons from Sakarya and Bursa. In this study, construct validity, internal consistency, test-retest reliability, and item analysis of the scale were examined. As a result of factor analysis for construct…

What makes a family reliable?

NASA Technical Reports Server (NTRS)

Williams, James G.

1992-01-01

Asteroid families are clusters of asteroids in proper element space which are thought to be fragments from former collisions. Studies of families promise to improve understanding of large collision events and a large event can open up the interior of a former parent body to view. While a variety of searches for families have found the same heavily populated families, and some searches have found the same families of lower population, there is much apparent disagreement between proposed families of lower population of different investigations. Indicators of reliability, factors compromising reliability, an illustration of the influence of different data samples, and a discussion of how several investigations perceived families in the same region of proper element space are given.

Examining the factor structure of MUIS-C scale among baby boomers with hepatitis C.

PubMed

Reinoso, Humberto; Türegün, Mehmet

2016-11-01

Baby boomers account for two out of every three cases of hepatitis C infection in the U.S. To conduct an exploratory factor analysis directed at supporting the use of the MUIS-C as a reliable instrument in measuring illness uncertainty among baby boomers with hepatitis C. The steps of conducting a typical principal component analysis (PCA) with an oblique rotation were used on a sample of 146 participants, the sampling adequacy of items was examined via the Kaiser-Meyer-Olkin (KMO) measure, and the Bartlett's sphericity test was used for appropriateness of conducting a factor analysis. A two-factor structure was obtained by using Horn's parallel analysis method. The two factors explained a cumulative total of 45.8% of the variance. The results of the analyses indicated that the MUIS-C was a valid and reliable instrument and potentially suitable for use in baby boomer population diagnosed with hepatitis C. Published by Elsevier Inc.

The Reliability and Validity of Discrete and Continuous Measures of Psychopathology: A Quantitative Review

ERIC Educational Resources Information Center

Markon, Kristian E.; Chmielewski, Michael; Miller, Christopher J.

2011-01-01

In 2 meta-analyses involving 58 studies and 59,575 participants, we quantitatively summarized the relative reliability and validity of continuous (i.e., dimensional) and discrete (i.e., categorical) measures of psychopathology. Overall, results suggest an expected 15% increase in reliability and 37% increase in validity through adoption of a…

Reliability of Lactation Assessment Tools Applied to Overweight and Obese Women.

PubMed

Chapman, Donna J; Doughty, Katherine; Mullin, Elizabeth M; Pérez-Escamilla, Rafael

2016-05-01

The interrater reliability of lactation assessment tools has not been evaluated in overweight/obese women. This study aimed to compare the interrater reliability of 4 lactation assessment tools in this population. A convenience sample of 45 women (body mass index > 27.0) was videotaped while breastfeeding (twice daily on days 2, 4, and 7 postpartum). Three International Board Certified Lactation Consultants independently rated each videotaped session using 4 tools (Infant Breastfeeding Assessment Tool [IBFAT], modified LATCH [mLATCH], modified Via Christi [mVC], and Riordan's Tool [RT]). For each day and tool, we evaluated interrater reliability with 1-way repeated-measures analyses of variance, intraclass correlation coefficients (ICCs), and percentage absolute agreement between raters. Analyses of variance showed significant differences between raters' scores on day 2 (all scales) and day 7 (RT). Intraclass correlation coefficient values reflected good (mLATCH) to excellent reliability (IBFAT, mVC, and RT) on days 2 and 7. All day 4 ICCs reflected good reliability. The ICC for mLATCH was significantly lower than all others on day 2 and was significantly lower than IBFAT (day 7). Percentage absolute interrater agreement for scale components ranged from 31% (day 2: observable swallowing, RT) to 92% (day 7: IBFAT, fixing; and mVC, latch time). Swallowing scores on all scales had the lowest levels of interrater agreement (31%-64%). We demonstrated differences in the interrater reliability of 4 lactation assessment tools when applied to overweight/obese women, with the lowest values observed on day 4. Swallowing assessment was particularly unreliable. Researchers and clinicians using these scales should be aware of the differences in their psychometric behavior. © The Author(s) 2015.

A comparison of reliability and conventional estimation of safe fatigue life and safe inspection intervals

NASA Technical Reports Server (NTRS)

Hooke, F. H.

1972-01-01

Both the conventional and reliability analyses for determining safe fatigue life are predicted on a population having a specified (usually log normal) distribution of life to collapse under a fatigue test load. Under a random service load spectrum, random occurrences of load larger than the fatigue test load may confront and cause collapse of structures which are weakened, though not yet to the fatigue test load. These collapses are included in reliability but excluded in conventional analysis. The theory of risk determination by each method is given, and several reasonably typical examples have been worked out, in which it transpires that if one excludes collapse through exceedance of the uncracked strength, the reliability and conventional analyses gave virtually identical probabilities of failure or survival.

The impact of intrinsic motivation on session attendance and reliable cognitive improvement in cognitive remediation in schizophrenia.

PubMed

Bryce, S D; Lee, S J; Ponsford, J L; Lawrence, R J; Tan, E J; Rossell, S L

2018-06-20

Cognitive remediation (CR) is considered a potentially effective method of improving cognitive function in people with schizophrenia. Few studies, however, have explored the role of intrinsic motivation on treatment utilization or training outcomes in CR in this population. This study explored the impact of task-specific intrinsic motivation on attendance and reliable cognitive improvement in a controlled trial comparing CR with a computer game (CG) playing control. Forty-nine participants with schizophrenia or schizoaffective disorder, allocated to 10 weeks of group-based CR (n = 25) or CG control (n = 24), provided complete outcome data at baseline. Forty-three participants completed their assigned intervention. Cognition, psychopathology and intrinsic motivation were measured at baseline and end-treatment. Regression analyses explored the relative contribution of baseline motivation and other clinical factors to session attendance as well as the association of baseline and change in intrinsic motivation with the odds of reliable cognitive improvement (calculated using reliable change indices). Baseline reports of perceived program value were the only significant multivariable predictor of session attendance when including global cognition and psychiatric symptomatology. The odds of reliable cognitive improvement significantly increased with greater improvements in program interest and value from baseline to end-treatment. Motivational changes over time were highly variable between participants. Task-specific intrinsic motivation in schizophrenia may represent an important patient-related factor that contributes to session attendance and cognitive improvements in CR. Regular evaluation and enhancement of intrinsic motivation in cognitively enhancing interventions may optimize treatment engagement and the likelihood of meaningful training outcomes. Copyright © 2018 Elsevier B.V. All rights reserved.

Human Reliability and the Cost of Doing Business

NASA Technical Reports Server (NTRS)

DeMott, Diana

2014-01-01

Most businesses recognize that people will make mistakes and assume errors are just part of the cost of doing business, but does it need to be? Companies with high risk, or major consequences, should consider the effect of human error. In a variety of industries, Human Errors have caused costly failures and workplace injuries. These have included: airline mishaps, medical malpractice, administration of medication and major oil spills have all been blamed on human error. A technique to mitigate or even eliminate some of these costly human errors is the use of Human Reliability Analysis (HRA). Various methodologies are available to perform Human Reliability Assessments that range from identifying the most likely areas for concern to detailed assessments with human error failure probabilities calculated. Which methodology to use would be based on a variety of factors that would include: 1) how people react and act in different industries, and differing expectations based on industries standards, 2) factors that influence how the human errors could occur such as tasks, tools, environment, workplace, support, training and procedure, 3) type and availability of data and 4) how the industry views risk & reliability influences ( types of emergencies, contingencies and routine tasks versus cost based concerns). The Human Reliability Assessments should be the first step to reduce, mitigate or eliminate the costly mistakes or catastrophic failures. Using Human Reliability techniques to identify and classify human error risks allows a company more opportunities to mitigate or eliminate these risks and prevent costly failures.

Using Multivariate Generalizability Theory to Assess the Effect of Content Stratification on the Reliability of a Performance Assessment

ERIC Educational Resources Information Center

Keller, Lisa A.; Clauser, Brian E.; Swanson, David B.

2010-01-01

In recent years, demand for performance assessments has continued to grow. However, performance assessments are notorious for lower reliability, and in particular, low reliability resulting from task specificity. Since reliability analyses typically treat the performance tasks as randomly sampled from an infinite universe of tasks, these estimates…

Interobserver Reliability of the Berlin ARDS Definition and Strategies to Improve the Reliability of ARDS Diagnosis.

PubMed

Sjoding, Michael W; Hofer, Timothy P; Co, Ivan; Courey, Anthony; Cooke, Colin R; Iwashyna, Theodore J

2018-02-01

Failure to reliably diagnose ARDS may be a major driver of negative clinical trials and underrecognition and treatment in clinical practice. We sought to examine the interobserver reliability of the Berlin ARDS definition and examine strategies for improving the reliability of ARDS diagnosis. Two hundred five patients with hypoxic respiratory failure from four ICUs were reviewed independently by three clinicians, who evaluated whether patients had ARDS, the diagnostic confidence of the reviewers, whether patients met individual ARDS criteria, and the time when criteria were met. Interobserver reliability of an ARDS diagnosis was "moderate" (kappa = 0.50; 95% CI, 0.40-0.59). Sixty-seven percent of diagnostic disagreements between clinicians reviewing the same patient was explained by differences in how chest imaging studies were interpreted, with other ARDS criteria contributing less (identification of ARDS risk factor, 15%; cardiac edema/volume overload exclusion, 7%). Combining the independent reviews of three clinicians can increase reliability to "substantial" (kappa = 0.75; 95% CI, 0.68-0.80). When a clinician diagnosed ARDS with "high confidence," all other clinicians agreed with the diagnosis in 72% of reviews. There was close agreement between clinicians about the time when a patient met all ARDS criteria if ARDS developed within the first 48 hours of hospitalization (median difference, 5 hours). The reliability of the Berlin ARDS definition is moderate, driven primarily by differences in chest imaging interpretation. Combining independent reviews by multiple clinicians or improving methods to identify bilateral infiltrates on chest imaging are important strategies for improving the reliability of ARDS diagnosis. Copyright © 2017 American College of Chest Physicians. All rights reserved.

Validity and Reliability of the Upper Extremity Work Demands Scale.

PubMed

Jacobs, Nora W; Berduszek, Redmar J; Dijkstra, Pieter U; van der Sluis, Corry K

2017-12-01

Purpose To evaluate validity and reliability of the upper extremity work demands (UEWD) scale. Methods Participants from different levels of physical work demands, based on the Dictionary of Occupational Titles categories, were included. A historical database of 74 workers was added for factor analysis. Criterion validity was evaluated by comparing observed and self-reported UEWD scores. To assess structural validity, a factor analysis was executed. For reliability, the difference between two self-reported UEWD scores, the smallest detectable change (SDC), test-retest reliability and internal consistency were determined. Results Fifty-four participants were observed at work and 51 of them filled in the UEWD twice with a mean interval of 16.6 days (SD 3.3, range = 10-25 days). Criterion validity of the UEWD scale was moderate (r = .44, p = .001). Factor analysis revealed that 'force and posture' and 'repetition' subscales could be distinguished with Cronbach's alpha of .79 and .84, respectively. Reliability was good; there was no significant difference between repeated measurements. An SDC of 5.0 was found. Test-retest reliability was good (intraclass correlation coefficient for agreement = .84) and all item-total correlations were >.30. There were two pairs of highly related items. Conclusion Reliability of the UEWD scale was good, but criterion validity was moderate. Based on current results, a modified UEWD scale (2 items removed, 1 item reworded, divided into 2 subscales) was proposed. Since observation appeared to be an inappropriate gold standard, we advise to investigate other types of validity, such as construct validity, in further research.

Factor structure and psychometric properties of the Fertility Problem Inventory–Short Form

PubMed Central

Zurlo, Maria Clelia; Cattaneo Della Volta, Maria Franscesca; Vallone, Federica

2017-01-01

The study analyses factor structure and psychometric properties of the Italian version of the Fertility Problem Inventory–Short Form. A sample of 206 infertile couples completed the Italian version of Fertility Problem Inventory (46 items) with demographics, State Anxiety Scale of State-Trait Anxiety Inventory (Form Y), Edinburgh Depression Scale and Dyadic Adjustment Scale, used to assess convergent and discriminant validity. Confirmatory factor analysis was unsatisfactory (comparative fit index = 0.87; Tucker-Lewis Index = 0.83; root mean square error of approximation = 0.17), and Cronbach’s α (0.95) revealed a redundancy of items. Exploratory factor analysis was carried out deleting cross-loading items, and Mokken scale analysis was applied to verify the items homogeneity within the reduced subscales of the questionnaire. The Fertility Problem Inventory–Short Form consists of 27 items, tapping four meaningful and reliable factors. Convergent and discriminant validity were confirmed. Findings indicated that the Fertility Problem Inventory–Short Form is a valid and reliable measure to assess infertility-related stress dimensions. PMID:29379625

The Reliability of Individualized Load-Velocity Profiles.

PubMed

Banyard, Harry G; Nosaka, K; Vernon, Alex D; Haff, G Gregory

2017-11-15

This study examined the reliability of peak velocity (PV), mean propulsive velocity (MPV), and mean velocity (MV) in the development of load-velocity profiles (LVP) in the full depth free-weight back squat performed with maximal concentric effort. Eighteen resistance-trained men performed a baseline one-repetition maximum (1RM) back squat trial and three subsequent 1RM trials used for reliability analyses, with 48-hours interval between trials. 1RM trials comprised lifts from six relative loads including 20, 40, 60, 80, 90, and 100% 1RM. Individualized LVPs for PV, MPV, or MV were derived from loads that were highly reliable based on the following criteria: intra-class correlation coefficient (ICC) >0.70, coefficient of variation (CV) ≤10%, and Cohen's d effect size (ES) <0.60. PV was highly reliable at all six loads. Importantly, MPV and MV were highly reliable at 20, 40, 60, 80 and 90% but not 100% 1RM (MPV: ICC=0.66, CV=18.0%, ES=0.10, standard error of the estimate [SEM]=0.04m·s -1 ; MV: ICC=0.55, CV=19.4%, ES=0.08, SEM=0.04m·s -1 ). When considering the reliable ranges, almost perfect correlations were observed for LVPs derived from PV 20-100% (r=0.91-0.93), MPV 20-90% (r=0.92-0.94) and MV 20-90% (r=0.94-0.95). Furthermore, the LVPs were not significantly different (p>0.05) between trials, movement velocities, or between linear regression versus second order polynomial fits. PV 20-100% , MPV 20-90% , and MV 20-90% are reliable and can be utilized to develop LVPs using linear regression. Conceptually, LVPs can be used to monitor changes in movement velocity and employed as a method for adjusting sessional training loads according to daily readiness.

Learning Style Scales: a valid and reliable questionnaire.

PubMed

Abdollahimohammad, Abdolghani; Ja'afar, Rogayah

2014-01-01

Learning-style instruments assist students in developing their own learning strategies and outcomes, in eliminating learning barriers, and in acknowledging peer diversity. Only a few psychometrically validated learning-style instruments are available. This study aimed to develop a valid and reliable learning-style instrument for nursing students. A cross-sectional survey study was conducted in two nursing schools in two countries. A purposive sample of 156 undergraduate nursing students participated in the study. Face and content validity was obtained from an expert panel. The LSS construct was established using principal axis factoring (PAF) with oblimin rotation, a scree plot test, and parallel analysis (PA). The reliability of LSS was tested using Cronbach's α, corrected item-total correlation, and test-retest. Factor analysis revealed five components, confirmed by PA and a relatively clear curve on the scree plot. Component strength and interpretability were also confirmed. The factors were labeled as perceptive, solitary, analytic, competitive, and imaginative learning styles. Cronbach's α was >0.70 for all subscales in both study populations. The corrected item-total correlations were >0.30 for the items in each component. The LSS is a valid and reliable inventory for evaluating learning style preferences in nursing students in various multicultural environments.

Reliability of laboratory measurement of human food intake.

PubMed

Laessle, R; Geiermann, L

2012-02-01

The universal eating monitor (UEM) of Kissileff for laboratory measurement of food intake was modified and used with a newly developed special software to compute cumulative intake data. To explore the measurement precision of the UEM an investigation of test-retest-reliability of food intake parameters was conducted. The intake characteristics of 125 males and females were measured repeatedly in the laboratory with a measurement interval of 1 week. Pudding of preferred flavour served as test meal. Test-retest-reliability of intake characteristics ranged from .49 (change of eating rate) to .89 (initial eating rate). All test-retest correlations were highly significant. Sex, BMI and eating habits according to TFEQ-factors had no significant effects on reliability of intake characteristics. The test-retest-reliability of the laboratory intake measures is as good as those of personality questionnaires, where it should be better than .80. Reliability coefficients are valid independent of sex, BMI or trait characteristics of eating behaviour. Copyright © 2011 Elsevier Ltd. All rights reserved.

A vector matching method for analysing logic Petri nets

NASA Astrophysics Data System (ADS)

Du, YuYue; Qi, Liang; Zhou, MengChu

2011-11-01

Batch processing function and passing value indeterminacy in cooperative systems can be described and analysed by logic Petri nets (LPNs). To directly analyse the properties of LPNs, the concept of transition enabling vector sets is presented and a vector matching method used to judge the enabling transitions is proposed in this article. The incidence matrix of LPNs is defined; an equation about marking change due to a transition's firing is given; and a reachable tree is constructed. The state space explosion is mitigated to a certain extent from directly analysing LPNs. Finally, the validity and reliability of the proposed method are illustrated by an example in electronic commerce.

Reliability analysis of laminated CMC components through shell subelement techniques

NASA Technical Reports Server (NTRS)

Starlinger, Alois; Duffy, Stephen F.; Gyekenyesi, John P.

1992-01-01

An updated version of the integrated design program Composite Ceramics Analysis and Reliability Evaluation of Structures (C/CARES) was developed for the reliability evaluation of ceramic matrix composites (CMC) laminated shell components. The algorithm is now split into two modules: a finite-element data interface program and a reliability evaluation algorithm. More flexibility is achieved, allowing for easy implementation with various finite-element programs. The interface program creates a neutral data base which is then read by the reliability module. This neutral data base concept allows easy data transfer between different computer systems. The new interface program from the finite-element code Matrix Automated Reduction and Coupling (MARC) also includes the option of using hybrid laminates (a combination of plies of different materials or different layups) and allows for variations in temperature fields throughout the component. In the current version of C/CARES, a subelement technique was implemented, enabling stress gradients within an element to be taken into account. The noninteractive reliability function is now evaluated at each Gaussian integration point instead of using averaging techniques. As a result of the increased number of stress evaluation points, considerable improvements in the accuracy of reliability analyses were realized.

Enhancing healthcare process design with human factors engineering and reliability science, part 2: applying the knowledge to clinical documentation systems.

PubMed

Boston-Fleischhauer, Carol

2008-02-01

The demand to redesign healthcare processes that achieve efficient, effective, and safe results is never-ending. Part 1 of this 2-part series introduced human factors engineering and reliability science as important knowledge to enhance existing operational and clinical process design methods in healthcare organizations. In part 2, the author applies this knowledge to one of the most common operational processes in healthcare: clinical documentation. Specific implementation strategies and anticipated results are discussed, along with organizational challenges and recommended executive responses.

Topics in Measurement: Reliability and Validity.

ERIC Educational Resources Information Center

Dick, Walter; Hagerty, Nancy

This text was developed on an autoinstructional basis to familiarize the reader with the various interpretations of reliability and validity, their measurement and evaluation, and factors influencing their measurement. The text enables those with prior knowledge of statistics to increase their understanding of variance and correlation. Review…

Validity and reliability of a health care service evaluation instrument for tuberculosis

PubMed Central

Scatena, Lucia Marina; Wysocki, Anneliese Domingues; Beraldo, Aline Ale; Magnabosco, Gabriela Tavares; Brunello, Maria Eugênia Firmino; Netto, Antonio Ruffino; Nogueira, Jordana de Almeida; Silva, Reinaldo Antonio; Brito, Ewerton William Gomes; Alexandre, Patricia Borges Dias; Monroe, Aline Aparecida; Villa, Tereza Cristina Scatena

2015-01-01

OBJECTIVE To evaluate the validity and reliability of an instrument that evaluates the structure of primary health care units for the treatment of tuberculosis. METHODS This cross-sectional study used simple random sampling and evaluated 1,037 health care professionals from five Brazilian municipalities (Natal, state of Rio Grande do Norte; Cabedelo, state of Paraíba; Foz do Iguaçu, state of Parana; Sao José do Rio Preto, state of Sao Paulo, and Uberaba, state of Minas Gerais) in 2011. Structural indicators were identified and validated, considering different methods of organization of the health care system in the municipalities of different population sizes. Each structure represented the organization of health care services and contained the resources available for the execution of health care services: physical resources (equipment, consumables, and facilities); human resources (number and qualification); and resources for maintenance of the existing infrastructure and technology (deemed as the organization of health care services). The statistical analyses used in the validation process included reliability analysis, exploratory factor analysis, and confirmatory factor analysis. RESULTS The validation process indicated the retention of five factors, with 85.9% of the total variance explained, internal consistency between 0.6460 and 0.7802, and quality of fit of the confirmatory factor analysis of 0.995 using the goodness-of-fit index. The retained factors comprised five structural indicators: professionals involved in the care of tuberculosis patients, training, access to recording instruments, availability of supplies, and coordination of health care services with other levels of care. Availability of supplies had the best performance and the lowest coefficient of variation among the services evaluated. The indicators of assessment of human resources and coordination with other levels of care had satisfactory performance, but the latter showed the highest

Validity and reliability of the Spanish-language version of the self-administered Leeds Assessment of Neuropathic Symptoms and Signs (S-LANSS) pain scale.

PubMed

López-de-Uralde-Villanueva, I; Gil-Martínez, A; Candelas-Fernández, P; de Andrés-Ares, J; Beltrán-Alacreu, H; La Touche, R

2016-12-08

The self-administered Leeds Assessment of Neuropathic Symptoms and Signs (S-LANSS) scale is a tool designed to identify patients with pain with neuropathic features. To assess the validity and reliability of the Spanish-language version of the S-LANSS scale. Our study included a total of 182 patients with chronic pain to assess the convergent and discriminant validity of the S-LANSS; the sample was increased to 321 patients to evaluate construct validity and reliability. The validated Spanish-language version of the ID-Pain questionnaire was used as the criterion variable. All participants completed the ID-Pain, the S-LANSS, and the Numerical Rating Scale for pain. Discriminant validity was evaluated by analysing sensitivity, specificity, and the area under the receiver operating characteristic curve (AUC). Construct validity was assessed with factor analysis and by comparing the odds ratio of each S-LANSS item to the total score. Convergent validity and reliability were evaluated with Pearson's r and Cronbach's alpha, respectively. The optimal cut-off point for S-LANSS was ≥12 points (AUC=.89; sensitivity=88.7; specificity=76.6). Factor analysis yielded one factor; furthermore, all items contributed significantly to the positive total score on the S-LANSS (P<.05). The S-LANSS showed a significant correlation with ID-Pain (r=.734, α=.71). The Spanish-language version of the S-LANSS is valid and reliable for identifying patients with chronic pain with neuropathic features. Copyright © 2016 Sociedad Española de Neurología. Publicado por Elsevier España, S.L.U. All rights reserved.

A novel and reliable computational intelligence system for breast cancer detection.

PubMed

Zadeh Shirazi, Amin; Seyyed Mahdavi Chabok, Seyyed Javad; Mohammadi, Zahra

2018-05-01

Cancer is the second important morbidity and mortality factor among women and the most incident type is breast cancer. This paper suggests a hybrid computational intelligence model based on unsupervised and supervised learning techniques, i.e., self-organizing map (SOM) and complex-valued neural network (CVNN), for reliable detection of breast cancer. The dataset used in this paper consists of 822 patients with five features (patient's breast mass shape, margin, density, patient's age, and Breast Imaging Reporting and Data System assessment). The proposed model was used for the first time and can be categorized in two stages. In the first stage, considering the input features, SOM technique was used to cluster the patients with the most similarity. Then, in the second stage, for each cluster, the patient's features were applied to complex-valued neural network and dealt with to classify breast cancer severity (benign or malign). The obtained results corresponding to each patient were compared to the medical diagnosis results using receiver operating characteristic analyses and confusion matrix. In the testing phase, health and disease detection ratios were 94 and 95%, respectively. Accordingly, the superiority of the proposed model was proved and can be used for reliable and robust detection of breast cancer.

Launch and Assembly Reliability Analysis for Human Space Exploration Missions

NASA Technical Reports Server (NTRS)

Cates, Grant; Gelito, Justin; Stromgren, Chel; Cirillo, William; Goodliff, Kandyce