Application of factorial designs to study factors involved in the determination of aldehydes present in beer by on-fiber derivatization in combination with gas chromatography and mass spectrometry.

PubMed

Carrillo, Génesis; Bravo, Adriana; Zufall, Carsten

2011-05-11

With the aim of studying the factors involved in on-fiber derivatization of Strecker aldehydes, furfural, and (E)-2-nonenal with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine in beer, factorial designs were applied. The effect of the temperature, time, and NaCl addition on the analytes' derivatization/extraction efficiency was studied through a factorial 2(3) randomized-block design; all of the factors and their interactions were significant at the 95% confidence level for most of the analytes. The effect of temperature and its interactions separated the analytes in two groups. However, a single sampling condition was selected that optimized response for most aldehydes. The resulting method, combining on-fiber derivatization with gas chromatography-mass spectrometry, was validated. Limits of detections were between 0.015 and 1.60 μg/L, and relative standard deviations were between 1.1 and 12.2%. The efficacy of the internal standardization method was confirmed by recovery percentage (73-117%). The method was applied to the determination of aldehydes in fresh beer and after storage at 28 °C.

A factorial design experiment as a pilot study for noninvasive genetic sampling.

PubMed

Renan, Sharon; Speyer, Edith; Shahar, Naama; Gueta, Tomer; Templeton, Alan R; Bar-David, Shirli

2012-11-01

Noninvasive genetic sampling has increasingly been used in ecological and conservation studies during the last decade. A major part of the noninvasive genetic literature is dedicated to the search for optimal protocols, by comparing different methods of collection, preservation and extraction of DNA from noninvasive materials. However, the lack of quantitative comparisons among these studies and the possibility that different methods are optimal for different systems make it difficult to decide which protocol to use. Moreover, most studies that have compared different methods focused on a single factor - collection, preservation or extraction - while there could be interactions between these factors. We designed a factorial experiment, as a pilot study, aimed at exploring the effect of several collection, preservation and extraction methods, and the interactions between them, on the quality and amplification success of DNA obtained from Asiatic wild ass (Equus hemionus) faeces in Israel. The amplification success rates of one mitochondrial DNA and four microsatellite markers differed substantially as a function of collection, preservation and extraction methods and their interactions. The most efficient combination for our system integrated the use of swabs as a collection method with preservation at -20 °C and with the Qiagen DNA Stool Kit with modifications as the DNA extraction method. The significant interaction found between the collection, preservation methods and the extraction methods reinforces the importance of conducting a factorial design experiment, rather than examining each factor separately, as a pilot study before initiating a full-scale noninvasive research project. © 2012 Blackwell Publishing Ltd.

Performing Contrast Analysis in Factorial Designs: From NHST to Confidence Intervals and Beyond

PubMed Central

Wiens, Stefan; Nilsson, Mats E.

2016-01-01

Because of the continuing debates about statistics, many researchers may feel confused about how to analyze and interpret data. Current guidelines in psychology advocate the use of effect sizes and confidence intervals (CIs). However, researchers may be unsure about how to extract effect sizes from factorial designs. Contrast analysis is helpful because it can be used to test specific questions of central interest in studies with factorial designs. It weighs several means and combines them into one or two sets that can be tested with t tests. The effect size produced by a contrast analysis is simply the difference between means. The CI of the effect size informs directly about direction, hypothesis exclusion, and the relevance of the effects of interest. However, any interpretation in terms of precision or likelihood requires the use of likelihood intervals or credible intervals (Bayesian). These various intervals and even a Bayesian t test can be obtained easily with free software. This tutorial reviews these methods to guide researchers in answering the following questions: When I analyze mean differences in factorial designs, where can I find the effects of central interest, and what can I learn about their effect sizes? PMID:29805179

Sb2Te3 and Its Superlattices: Optimization by Statistical Design.

PubMed

Behera, Jitendra K; Zhou, Xilin; Ranjan, Alok; Simpson, Robert E

2018-05-02

The objective of this work is to demonstrate the usefulness of fractional factorial design for optimizing the crystal quality of chalcogenide van der Waals (vdW) crystals. We statistically analyze the growth parameters of highly c axis oriented Sb 2 Te 3 crystals and Sb 2 Te 3 -GeTe phase change vdW heterostructured superlattices. The statistical significance of the growth parameters of temperature, pressure, power, buffer materials, and buffer layer thickness was found by fractional factorial design and response surface analysis. Temperature, pressure, power, and their second-order interactions are the major factors that significantly influence the quality of the crystals. Additionally, using tungsten rather than molybdenum as a buffer layer significantly enhances the crystal quality. Fractional factorial design minimizes the number of experiments that are necessary to find the optimal growth conditions, resulting in an order of magnitude improvement in the crystal quality. We highlight that statistical design of experiment methods, which is more commonly used in product design, should be considered more broadly by those designing and optimizing materials.

The International Design Study for the Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, K.

2008-02-21

The International Design Study for a future Neutrino Factory and super-beam facility (the ISS) established the physics case for a high-precision programme of long-baseline neutrino-oscillation measurements. The ISS also identified baseline specifications for the Neutrino Factory accelerator complex and the neutrino detector systems. This paper summarises the objectives of the International Design Study for the Neutrino Factory (the IDS-NF). The IDS-NF will build on the work of the ISS to deliver a Reference Design Report for the Neutrino Factory by 2012/13 and an Interim Design Report by 2010/11.

Design of Experiments with Multiple Independent Variables: A Resource Management Perspective on Complete and Reduced Factorial Designs

PubMed Central

Collins, Linda M.; Dziak, John J.; Li, Runze

2009-01-01

An investigator who plans to conduct experiments with multiple independent variables must decide whether to use a complete or reduced factorial design. This article advocates a resource management perspective on making this decision, in which the investigator seeks a strategic balance between service to scientific objectives and economy. Considerations in making design decisions include whether research questions are framed as main effects or simple effects; whether and which effects are aliased (confounded) in a particular design; the number of experimental conditions that must be implemented in a particular design and the number of experimental subjects the design requires to maintain the desired level of statistical power; and the costs associated with implementing experimental conditions and obtaining experimental subjects. In this article four design options are compared: complete factorial, individual experiments, single factor, and fractional factorial designs. Complete and fractional factorial designs and single factor designs are generally more economical than conducting individual experiments on each factor. Although relatively unfamiliar to behavioral scientists, fractional factorial designs merit serious consideration because of their economy and versatility. PMID:19719358

A practical limit to trials needed in one-person randomized controlled experiments.

PubMed

Alemi, Roshan; Alemi, Farrokh

2007-01-01

Recently in this journal, J. Olsson and colleagues suggested the use of factorial experimental designs to guide a patient's efforts to choose among multiple interventions. These authors argue that factorial design, where every possible combination of the interventions is tried, is superior to sequential trial and errors. Factorial design is efficient in identifying the effectiveness of interventions (factor effect). Most patients care only about feeling better and not why their conditions are improving. If the goal of the patient is to get better and not to estimate the factor effect, then no control groups are needed. In this article, we show a modification in the factorial design of experiments proposed by Olsson and colleagues where a full-factorial design is planned, but experimentation is stopped when the patient's condition improves. With this modification, the number of trials is radically fewer than those needed by factorial design. For example, a patient trying out 4 different interventions with a median probability of success of .50 is expected to need 2 trials before stopping the experimentation in comparison with 32 in a full-factorial design.

Implementing Clinical Research Using Factorial Designs: A Primer.

PubMed

Baker, Timothy B; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Fiore, Michael C; Piper, Megan E; Collins, Linda M

2017-07-01

Factorial experiments have rarely been used in the development or evaluation of clinical interventions. However, factorial designs offer advantages over randomized controlled trial designs, the latter being much more frequently used in such research. Factorial designs are highly efficient (permitting evaluation of multiple intervention components with good statistical power) and present the opportunity to detect interactions amongst intervention components. Such advantages have led methodologists to advocate for the greater use of factorial designs in research on clinical interventions (Collins, Dziak, & Li, 2009). However, researchers considering the use of such designs in clinical research face a series of choices that have consequential implications for the interpretability and value of the experimental results. These choices include: whether to use a factorial design, selection of the number and type of factors to include, how to address the compatibility of the different factors included, whether and how to avoid confounds between the type and number of interventions a participant receives, and how to interpret interactions. The use of factorial designs in clinical intervention research poses choices that differ from those typically considered in randomized clinical trial designs. However, the great information yield of the former encourages clinical researchers' increased and careful execution of such designs. Copyright © 2017. Published by Elsevier Ltd.

Metabolic modelling in the development of cell factories by synthetic biology

PubMed Central

Jouhten, Paula

2012-01-01

Cell factories are commonly microbial organisms utilized for bioconversion of renewable resources to bulk or high value chemicals. Introduction of novel production pathways in chassis strains is the core of the development of cell factories by synthetic biology. Synthetic biology aims to create novel biological functions and systems not found in nature by combining biology with engineering. The workflow of the development of novel cell factories with synthetic biology is ideally linear which will be attainable with the quantitative engineering approach, high-quality predictive models, and libraries of well-characterized parts. Different types of metabolic models, mathematical representations of metabolism and its components, enzymes and metabolites, are useful in particular phases of the synthetic biology workflow. In this minireview, the role of metabolic modelling in synthetic biology will be discussed with a review of current status of compatible methods and models for the in silico design and quantitative evaluation of a cell factory. PMID:24688669

Promoting contraceptive use among unmarried female migrants in one factory in Shanghai: a pilot workplace intervention.

PubMed

Qian, Xu; Smith, Helen; Huang, Wenyuan; Zhang, Jie; Huang, Ying; Garner, Paul

2007-05-31

In urban China, more single women are becoming pregnant and resorting to induced abortion, despite the wide availability of temporary methods of contraception. We developed and piloted a workplace-based intervention to promote contraceptive use in unmarried female migrants working in privately owned factories. Quasi-experimental design. In consultation with clients, we developed a workplace based intervention to promote contraception use in unmarried female migrants in a privately owned factory. We then implemented this in one factory, using a controlled before-and-after design. The intervention included lectures, bespoke information leaflets, and support to the factory doctors in providing a contraceptive service. 598 women participated: most were under 25, migrants to the city, with high school education. Twenty percent were lost when staff were made redundant, and implementation was logistically complicated. All women attended the initial lecture, and just over half the second lecture. Most reported reading the educational material provided (73%), but very few women reported using the free family planning services offered at the factory clinic (5%) or the Family Planning Institute (3%). At baseline, 90% (N = 539) stated that contraceptives were required if having sex before marriage; of those reporting sex in the last three months, the majority reporting using contraceptives (78%, 62/79) but condom use was low (44%, 35/79). Qualitative data showed that the reading material seemed to be popular and young women expressed a need for more specific reproductive health information, particularly on HIV/AIDS. Women wanted services with some privacy and anonymity, and views on the factory service were mixed. Implementing a complex intervention with a hard to reach population through a factory in China, using a quasi-experimental design, is not easy. Further research should focus on the specific needs and service preferences of this population and these should be considered in any policy reform so that contraceptive use may be encouraged among young urban migrant workers.

Sensitivity analysis and nonlinearity assessment of steam cracking furnace process

NASA Astrophysics Data System (ADS)

Rosli, M. N.; Sudibyo, Aziz, N.

2017-11-01

In this paper, sensitivity analysis and nonlinearity assessment of cracking furnace process are presented. For the sensitivity analysis, the fractional factorial design method is employed as a method to analyze the effect of input parameters, which consist of four manipulated variables and two disturbance variables, to the output variables and to identify the interaction between each parameter. The result of the factorial design method is used as a screening method to reduce the number of parameters, and subsequently, reducing the complexity of the model. It shows that out of six input parameters, four parameters are significant. After the screening is completed, step test is performed on the significant input parameters to assess the degree of nonlinearity of the system. The result shows that the system is highly nonlinear with respect to changes in an air-to-fuel ratio (AFR) and feed composition.

Testing Nelder-Mead based repulsion algorithms for multiple roots of nonlinear systems via a two-level factorial design of experiments.

PubMed

Ramadas, Gisela C V; Rocha, Ana Maria A C; Fernandes, Edite M G P

2015-01-01

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

Multi-Reader ROC studies with Split-Plot Designs: A Comparison of Statistical Methods

PubMed Central

Obuchowski, Nancy A.; Gallas, Brandon D.; Hillis, Stephen L.

2012-01-01

Rationale and Objectives Multi-reader imaging trials often use a factorial design, where study patients undergo testing with all imaging modalities and readers interpret the results of all tests for all patients. A drawback of the design is the large number of interpretations required of each reader. Split-plot designs have been proposed as an alternative, in which one or a subset of readers interprets all images of a sample of patients, while other readers interpret the images of other samples of patients. In this paper we compare three methods of analysis for the split-plot design. Materials and Methods Three statistical methods are presented: Obuchowski-Rockette method modified for the split-plot design, a newly proposed marginal-mean ANOVA approach, and an extension of the three-sample U-statistic method. A simulation study using the Roe-Metz model was performed to compare the type I error rate, power and confidence interval coverage of the three test statistics. Results The type I error rates for all three methods are close to the nominal level but tend to be slightly conservative. The statistical power is nearly identical for the three methods. The coverage of 95% CIs fall close to the nominal coverage for small and large sample sizes. Conclusions The split-plot MRMC study design can be statistically efficient compared with the factorial design, reducing the number of interpretations required per reader. Three methods of analysis, shown to have nominal type I error rate, similar power, and nominal CI coverage, are available for this study design. PMID:23122570

Design Learning of Teaching Factory in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Putra, R. C.; Kusumah, I. H.; Komaro, M.; Rahayu, Y.; Asfiyanur, E. P.

2018-02-01

The industrial world that is the target of the process and learning outcomes of vocational high school (SMK) has its own character and nuance. Therefore, vocational education institutions in the learning process should be able to make the appropriate learning approach and in accordance with the industrial world. One approach to learning that is based on production and learning in the world of work is by industry-based learning or known as Teaching Factory, where in this model apply learning that involves direct students in goods or service activities are expected to have the quality so it is worth selling and accepted by consumers. The method used is descriptive approach. The purpose of this research is to get the design of the teaching factory based on the competency requirements of the graduates of the spouse industry, especially in the engineering department. The results of this study is expected to be one of the choice of model factory teaching in the field of machinery engineering in accordance with the products and competencies of the graduates that the industry needs.

Application of multi-factorial design of experiments to successfully optimize immunoassays for robust measurements of therapeutic proteins.

PubMed

Ray, Chad A; Patel, Vimal; Shih, Judy; Macaraeg, Chris; Wu, Yuling; Thway, Theingi; Ma, Mark; Lee, Jean W; Desilva, Binodh

2009-02-20

Developing a process that generates robust immunoassays that can be used to support studies with tight timelines is a common challenge for bioanalytical laboratories. Design of experiments (DOEs) is a tool that has been used by many industries for the purpose of optimizing processes. The approach is capable of identifying critical factors and their interactions with a minimal number of experiments. The challenge for implementing this tool in the bioanalytical laboratory is to develop a user-friendly approach that scientists can understand and apply. We have successfully addressed these challenges by eliminating the screening design, introducing automation, and applying a simple mathematical approach for the output parameter. A modified central composite design (CCD) was applied to three ligand binding assays. The intra-plate factors selected were coating, detection antibody concentration, and streptavidin-HRP concentrations. The inter-plate factors included incubation times for each step. The objective was to maximize the logS/B (S/B) of the low standard to the blank. The maximum desirable conditions were determined using JMP 7.0. To verify the validity of the predictions, the logS/B prediction was compared against the observed logS/B during pre-study validation experiments. The three assays were optimized using the multi-factorial DOE. The total error for all three methods was less than 20% which indicated method robustness. DOE identified interactions in one of the methods. The model predictions for logS/B were within 25% of the observed pre-study validation values for all methods tested. The comparison between the CCD and hybrid screening design yielded comparable parameter estimates. The user-friendly design enables effective application of multi-factorial DOE to optimize ligand binding assays for therapeutic proteins. The approach allows for identification of interactions between factors, consistency in optimal parameter determination, and reduced method development time.

Multi-reader ROC studies with split-plot designs: a comparison of statistical methods.

PubMed

Obuchowski, Nancy A; Gallas, Brandon D; Hillis, Stephen L

2012-12-01

Multireader imaging trials often use a factorial design, in which study patients undergo testing with all imaging modalities and readers interpret the results of all tests for all patients. A drawback of this design is the large number of interpretations required of each reader. Split-plot designs have been proposed as an alternative, in which one or a subset of readers interprets all images of a sample of patients, while other readers interpret the images of other samples of patients. In this paper, the authors compare three methods of analysis for the split-plot design. Three statistical methods are presented: the Obuchowski-Rockette method modified for the split-plot design, a newly proposed marginal-mean analysis-of-variance approach, and an extension of the three-sample U-statistic method. A simulation study using the Roe-Metz model was performed to compare the type I error rate, power, and confidence interval coverage of the three test statistics. The type I error rates for all three methods are close to the nominal level but tend to be slightly conservative. The statistical power is nearly identical for the three methods. The coverage of 95% confidence intervals falls close to the nominal coverage for small and large sample sizes. The split-plot multireader, multicase study design can be statistically efficient compared to the factorial design, reducing the number of interpretations required per reader. Three methods of analysis, shown to have nominal type I error rates, similar power, and nominal confidence interval coverage, are available for this study design. Copyright © 2012 AUR. All rights reserved.

Assessing factorial invariance of two-way rating designs using three-way methods

PubMed Central

Kroonenberg, Pieter M.

2015-01-01

Assessing the factorial invariance of two-way rating designs such as ratings of concepts on several scales by different groups can be carried out with three-way models such as the Parafac and Tucker models. By their definitions these models are double-metric factorially invariant. The differences between these models lie in their handling of the links between the concept and scale spaces. These links may consist of unrestricted linking (Tucker2 model), invariant component covariances but variable variances per group and per component (Parafac model), zero covariances and variances different per group but not per component (Replicated Tucker3 model) and strict invariance (Component analysis on the average matrix). This hierarchy of invariant models, and the procedures by which to evaluate the models against each other, is illustrated in some detail with an international data set from attachment theory. PMID:25620936

Adapting Evaluations of Alternative Payment Models to a Changing Environment.

PubMed

Grannemann, Thomas W; Brown, Randall S

2018-04-01

To identify the most robust methods for evaluating alternative payment models (APMs) in the emerging health care delivery system environment. We assess the impact of widespread testing of alternative payment models on the ability to find credible comparison groups. We consider the applicability of factorial research designs for assessing the effects of these models. The widespread adoption of alternative payment models could effectively eliminate the possibility of comparing APM results with a "pure" control or comparison group unaffected by other interventions. In this new environment, factorial experiments have distinct advantages over the single-model experimental or quasi-experimental designs that have been the mainstay of recent tests of Medicare payment and delivery models. The best prospects for producing definitive evidence of the effects of payment incentives for APMs include fractional factorial experiments that systematically vary requirements and payment provisions within a payment model. © Health Research and Educational Trust.

Method and Tool for Design Process Navigation and Automatic Generation of Simulation Models for Manufacturing Systems

NASA Astrophysics Data System (ADS)

Nakano, Masaru; Kubota, Fumiko; Inamori, Yutaka; Mitsuyuki, Keiji

Manufacturing system designers should concentrate on designing and planning manufacturing systems instead of spending their efforts on creating the simulation models to verify the design. This paper proposes a method and its tool to navigate the designers through the engineering process and generate the simulation model automatically from the design results. The design agent also supports collaborative design projects among different companies or divisions with distributed engineering and distributed simulation techniques. The idea was implemented and applied to a factory planning process.

Process design for microbial plastic factories: metabolic engineering of polyhydroxyalkanoates.

PubMed

Aldor, Ilana S; Keasling, Jay D

2003-10-01

Implementing several metabolic engineering strategies, either individually or in combination, it is possible to construct microbial plastic factories to produce a variety of polyhydroxyalkanoate (PHA) biopolymers with desirable structures and material properties. Approaches include external substrate manipulation, inhibitor addition, recombinant gene expression, host cell genome manipulation and, most recently, protein engineering of PHA biosynthetic enzymes. In addition, mathematical models and molecular methods can be used to elucidate metabolically engineered systems and to identify targets for performance improvement.

Design, analysis and presentation of factorial randomised controlled trials

PubMed Central

Montgomery, Alan A; Peters, Tim J; Little, Paul

2003-01-01

Background The evaluation of more than one intervention in the same randomised controlled trial can be achieved using a parallel group design. However this requires increased sample size and can be inefficient, especially if there is also interest in considering combinations of the interventions. An alternative may be a factorial trial, where for two interventions participants are allocated to receive neither intervention, one or the other, or both. Factorial trials require special considerations, however, particularly at the design and analysis stages. Discussion Using a 2 × 2 factorial trial as an example, we present a number of issues that should be considered when planning a factorial trial. The main design issue is that of sample size. Factorial trials are most often powered to detect the main effects of interventions, since adequate power to detect plausible interactions requires greatly increased sample sizes. The main analytical issues relate to the investigation of main effects and the interaction between the interventions in appropriate regression models. Presentation of results should reflect the analytical strategy with an emphasis on the principal research questions. We also give an example of how baseline and follow-up data should be presented. Lastly, we discuss the implications of the design, analytical and presentational issues covered. Summary Difficulties in interpreting the results of factorial trials if an influential interaction is observed is the cost of the potential for efficient, simultaneous consideration of two or more interventions. Factorial trials can in principle be designed to have adequate power to detect realistic interactions, and in any case they are the only design that allows such effects to be investigated. PMID:14633287

Microbial Consortia Engineering for Cellular Factories: in vitro to in silico systems

PubMed Central

Bernstein, Hans C; Carlson, Ross P

2012-01-01

This mini-review discusses the current state of experimental and computational microbial consortia engineering with a focus on cellular factories. A discussion of promising ecological theories central to community resource usage is presented to facilitate interpretation of consortial designs. Recent case studies exemplifying different resource usage motifs and consortial assembly templates are presented. The review also highlights in silico approaches to design and to analyze consortia with an emphasis on stoichiometric modeling methods. The discipline of microbial consortia engineering possesses a widely accepted potential to generate highly novel and effective bio-catalysts for applications from biofuels to specialty chemicals to enhanced mineral recovery. PMID:24688677

Kinetic models in industrial biotechnology - Improving cell factory performance.

PubMed

Almquist, Joachim; Cvijovic, Marija; Hatzimanikatis, Vassily; Nielsen, Jens; Jirstrand, Mats

2014-07-01

An increasing number of industrial bioprocesses capitalize on living cells by using them as cell factories that convert sugars into chemicals. These processes range from the production of bulk chemicals in yeasts and bacteria to the synthesis of therapeutic proteins in mammalian cell lines. One of the tools in the continuous search for improved performance of such production systems is the development and application of mathematical models. To be of value for industrial biotechnology, mathematical models should be able to assist in the rational design of cell factory properties or in the production processes in which they are utilized. Kinetic models are particularly suitable towards this end because they are capable of representing the complex biochemistry of cells in a more complete way compared to most other types of models. They can, at least in principle, be used to in detail understand, predict, and evaluate the effects of adding, removing, or modifying molecular components of a cell factory and for supporting the design of the bioreactor or fermentation process. However, several challenges still remain before kinetic modeling will reach the degree of maturity required for routine application in industry. Here we review the current status of kinetic cell factory modeling. Emphasis is on modeling methodology concepts, including model network structure, kinetic rate expressions, parameter estimation, optimization methods, identifiability analysis, model reduction, and model validation, but several applications of kinetic models for the improvement of cell factories are also discussed. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Fulfilling the law of a single independent variable and improving the result of mathematical educational research

NASA Astrophysics Data System (ADS)

Pardimin, H.; Arcana, N.

2018-01-01

Many types of research in the field of mathematics education apply the Quasi-Experimental method and statistical analysis use t-test. Quasi-experiment has a weakness that is difficult to fulfil “the law of a single independent variable”. T-test also has a weakness that is a generalization of the conclusions obtained is less powerful. This research aimed to find ways to reduce the weaknesses of the Quasi-experimental method and improved the generalization of the research results. The method applied in the research was a non-interactive qualitative method, and the type was concept analysis. Concepts analysed are the concept of statistics, research methods of education, and research reports. The result represented a way to overcome the weaknesses of quasi-Experiments and T-test. In addition, the way was to apply a combination of Factorial Design and Balanced Design, which the authors refer to as Factorial-Balanced Design. The advantages of this design are: (1) almost fulfilling “the low of single independent variable” so no need to test the similarity of the academic ability, (2) the sample size of the experimental group and the control group became larger and equal; so it becomes robust to deal with violations of the assumptions of the ANOVA test.

Sample size requirements for separating out the effects of combination treatments: Randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis

PubMed Central

2011-01-01

Background In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 × 2 factorial design. Methods We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. Results In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Conclusions Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 × 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Trial registration Current Controlled Trials ISRCTN61649292 PMID:21288326

Factorial experiments: efficient tools for evaluation of intervention components.

PubMed

Collins, Linda M; Dziak, John J; Kugler, Kari C; Trail, Jessica B

2014-10-01

An understanding of the individual and combined effects of a set of intervention components is important for moving the science of preventive medicine interventions forward. This understanding can often be achieved in an efficient and economical way via a factorial experiment, in which two or more independent variables are manipulated. The factorial experiment is a complement to the RCT; the two designs address different research questions. To offer an introduction to factorial experiments aimed at investigators trained primarily in the RCT. The factorial experiment is compared and contrasted with other experimental designs used commonly in intervention science to highlight where each is most efficient and appropriate. Several points are made: factorial experiments make very efficient use of experimental subjects when the data are properly analyzed; a factorial experiment can have excellent statistical power even if it has relatively few subjects per experimental condition; and when conducting research to select components for inclusion in a multicomponent intervention, interactions should be studied rather than avoided. Investigators in preventive medicine and related areas should begin considering factorial experiments alongside other approaches. Experimental designs should be chosen from a resource management perspective, which states that the best experimental design is the one that provides the greatest scientific benefit without exceeding available resources. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing new envelope technologies. This work is part of a multi-phase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysismore » of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall design with exterior continuous insulation (CI). Phase 3, completed in two stages, continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

Agile manufacturing: The factory of the future

NASA Technical Reports Server (NTRS)

Loibl, Joseph M.; Bossieux, Terry A.

1994-01-01

The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

Factorial versus multi-arm multi-stage designs for clinical trials with multiple treatments.

PubMed

Jaki, Thomas; Vasileiou, Despina

2017-02-20

When several treatments are available for evaluation in a clinical trial, different design options are available. We compare multi-arm multi-stage with factorial designs, and in particular, we will consider a 2 × 2 factorial design, where groups of patients will either take treatments A, B, both or neither. We investigate the performance and characteristics of both types of designs under different scenarios and compare them using both theory and simulations. For the factorial designs, we construct appropriate test statistics to test the hypothesis of no treatment effect against the control group with overall control of the type I error. We study the effect of the choice of the allocation ratios on the critical value and sample size requirements for a target power. We also study how the possibility of an interaction between the two treatments A and B affects type I and type II errors when testing for significance of each of the treatment effects. We present both simulation results and a case study on an osteoarthritis clinical trial. We discover that in an optimal factorial design in terms of minimising the associated critical value, the corresponding allocation ratios differ substantially to those of a balanced design. We also find evidence of potentially big losses in power in factorial designs for moderate deviations from the study design assumptions and little gain compared with multi-arm multi-stage designs when the assumptions hold. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. This work is part of a multiphase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall designmore » with exterior continuous insulation (CI). This report describes Phase 3, which was completed in two stages and continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

Ultrasound-assisted extraction for total sulphur measurement in mine tailings.

PubMed

Khan, Adnan Hossain; Shang, Julie Q; Alam, Raquibul

2012-10-15

A sample preparation method for percentage recovery of total sulphur (%S) in reactive mine tailings based on ultrasound-assisted digestion (USAD) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) was developed. The influence of various methodological factors was screened by employing a two-level and three-factor (2(3)) full factorial design and using KZK-1, a sericite schist certified reference material (CRM), to find the optimal combination of studied factors and %S. Factors such as the sonication time, temperature and acid combination were studied, with the best result identified as 20 min of sonication, 80°C temperature and 1 ml of HNO(3):1 ml of HCl, which can achieve 100% recovery for the selected CRM. Subsequently a fraction of the 2(3) full factorial design was applied to mine tailings. The percentage relative standard deviation (%RSD) for the ultrasound method is less than 3.0% for CRM and less than 6% for the mine tailings. The investigated method was verified by X-ray diffraction analysis. The USAD method compared favorably with existing methods such as hot plate assisted digestion method, X-ray fluorescence and LECO™-CNS method. Copyright © 2012 Elsevier B.V. All rights reserved.

Modeling and Recovery of Iron (Fe) from Red Mud by Coal Reduction

NASA Astrophysics Data System (ADS)

Zhao, Xiancong; Li, Hongxu; Wang, Lei; Zhang, Lifeng

Recovery of Fe from red mud has been studied using statistically designed experiments. The effects of three factors, namely: reduction temperature, reduction time and proportion of additive on recovery of Fe have been investigated. Experiments have been carried out using orthogonal central composite design and factorial design methods. A model has been obtained through variance analysis at 92.5% confidence level.

Study of Montmorillonite Clay for the Removal of Copper (II) by Adsorption: Full Factorial Design Approach and Cascade Forward Neural Network

PubMed Central

Turan, Nurdan Gamze; Ozgonenel, Okan

2013-01-01

An intensive study has been made of the removal efficiency of Cu(II) from industrial leachate by biosorption of montmorillonite. A 24 factorial design and cascade forward neural network (CFNN) were used to display the significant levels of the analyzed factors on the removal efficiency. The obtained model based on 24 factorial design was statistically tested using the well-known methods. The statistical analysis proves that the main effects of analyzed parameters were significant by an obtained linear model within a 95% confidence interval. The proposed CFNN model requires less experimental data and minimum calculations. Moreover, it is found to be cost-effective due to inherent advantages of its network structure. Optimization of the levels of the analyzed factors was achieved by minimizing adsorbent dosage and contact time, which were costly, and maximizing Cu(II) removal efficiency. The suggested optimum conditions are initial pH at 6, adsorbent dosage at 10 mg/L, and contact time at 10 min using raw montmorillonite with the Cu(II) removal of 80.7%. At the optimum values, removal efficiency was increased to 88.91% if the modified montmorillonite was used. PMID:24453833

DEVELOPMENT OF INFRARED METHODS FOR CHARACTERIZATION OF INORGANIC SULFUR SPECIES RELATED TO INJECTION DESULFURIZATION PROCESSES

EPA Science Inventory

Current methods designed to control and reduce the amount of sulfur dioxide emitted into the atmosphere from coal-fired power plants and factories rely upon the reaction between SO2 and alkaline earth compounds and are called flue gas desulfurization (FGD) processes. Of these met...

An Application of Fractional Factorial Designs to Study Drug Combinations

PubMed Central

Jaynes, Jessica; Ding, Xianting; Xu, Hongquan; Wong, Weng Kee; Ho, Chih-Ming

2013-01-01

Herpes simplex virus type 1 (HSV-1) is known to cause diseases of various severities. There is increasing interest to find drug combinations to treat HSV-1 by reducing drug resistance and cytotoxicity. Drug combinations offer potentially higher efficacy and lower individual drug dosage. In this paper, we report a new application of fractional factorial designs to investigate a biological system with HSV-1 and six antiviral drugs, namely, Interferon-alpha, Interferon-beta, Interferon-gamma, Ribavirin, Acyclovir, and TNF-alpha. We show how the sequential use of two- and three-level fractional factorial designs can screen for important drugs and drug interactions, as well as determine potential optimal drug dosages through the use of contour plots. Our initial experiment using a two-level fractional factorial design suggests that there is model inadequacy and drug dosages should be reduced. A follow-up experiment using a blocked three-level fractional factorial design indicates that TNF-alpha has little effect and HSV-1 infection can be suppressed effectively by using a right combination of the other five antiviral drugs. These observations have practical implications in the understanding of antiviral drug mechanism that can result in better design of antiviral drug therapy. PMID:22859316

MapFactory - Towards a mapping design pattern for big geospatial data

NASA Astrophysics Data System (ADS)

Rautenbach, Victoria; Coetzee, Serena

2018-05-01

With big geospatial data emerging, cartographers and geographic information scientists have to find new ways of dealing with the volume, variety, velocity, and veracity (4Vs) of the data. This requires the development of tools that allow processing, filtering, analysing, and visualising of big data through multidisciplinary collaboration. In this paper, we present the MapFactory design pattern that will be used for the creation of different maps according to the (input) design specification for big geospatial data. The design specification is based on elements from ISO19115-1:2014 Geographic information - Metadata - Part 1: Fundamentals that would guide the design and development of the map or set of maps to be produced. The results of the exploratory research suggest that the MapFactory design pattern will help with software reuse and communication. The MapFactory design pattern will aid software developers to build the tools that are required to automate map making with big geospatial data. The resulting maps would assist cartographers and others to make sense of big geospatial data.

Treatment of dyeing wastewater by TiO2/H2O2/UV process: experimental design approach for evaluating total organic carbon (TOC) removal efficiency.

PubMed

Lee, Seung-Mok; Kim, Young-Gyu; Cho, Il-Hyoung

2005-01-01

Optimal operating conditions in order to treat dyeing wastewater were investigated by using the factorial design and responses surface methodology (RSM). The experiment was statistically designed and carried out according to a 22 full factorial design with four factorial points, three center points, and four axial points. Then, the linear and nonlinear regression was applied on the data by using SAS package software. The independent variables were TiO2 dosage, H2O2 concentration and total organic carbon (TOC) removal efficiency of dyeing wastewater was dependent variable. From the factorial design and responses surface methodology (RSM), maximum removal efficiency (85%) of dyeing wastewater was obtained at TiO2 dosage (1.82 gL(-1)), H2O2 concentration (980 mgL(-1)) for oxidation reaction (20 min).

Comparing effects of fire modeling methods on simulated fire patterns and succession: a case study in the Missouri Ozarks

Treesearch

Jian Yang; Hong S. He; Brian R. Sturtevant; Brian R. Miranda; Eric J. Gustafson

2008-01-01

We compared four fire spread simulation methods (completely random, dynamic percolation. size-based minimum travel time algorithm. and duration-based minimum travel time algorithm) and two fire occurrence simulation methods (Poisson fire frequency model and hierarchical fire frequency model) using a two-way factorial design. We examined these treatment effects on...

Multilevel Factorial Experiments for Developing Behavioral Interventions: Power, Sample Size, and Resource Considerations†

PubMed Central

Dziak, John J.; Nahum-Shani, Inbal; Collins, Linda M.

2012-01-01

Factorial experimental designs have many potential advantages for behavioral scientists. For example, such designs may be useful in building more potent interventions, by helping investigators to screen several candidate intervention components simultaneously and decide which are likely to offer greater benefit before evaluating the intervention as a whole. However, sample size and power considerations may challenge investigators attempting to apply such designs, especially when the population of interest is multilevel (e.g., when students are nested within schools, or employees within organizations). In this article we examine the feasibility of factorial experimental designs with multiple factors in a multilevel, clustered setting (i.e., of multilevel multifactor experiments). We conduct Monte Carlo simulations to demonstrate how design elements such as the number of clusters, the number of lower-level units, and the intraclass correlation affect power. Our results suggest that multilevel, multifactor experiments are feasible for factor-screening purposes, because of the economical properties of complete and fractional factorial experimental designs. We also discuss resources for sample size planning and power estimation for multilevel factorial experiments. These results are discussed from a resource management perspective, in which the goal is to choose a design that maximizes the scientific benefit using the resources available for an investigation. PMID:22309956

Multilevel factorial experiments for developing behavioral interventions: power, sample size, and resource considerations.

PubMed

Dziak, John J; Nahum-Shani, Inbal; Collins, Linda M

2012-06-01

Factorial experimental designs have many potential advantages for behavioral scientists. For example, such designs may be useful in building more potent interventions by helping investigators to screen several candidate intervention components simultaneously and to decide which are likely to offer greater benefit before evaluating the intervention as a whole. However, sample size and power considerations may challenge investigators attempting to apply such designs, especially when the population of interest is multilevel (e.g., when students are nested within schools, or when employees are nested within organizations). In this article, we examine the feasibility of factorial experimental designs with multiple factors in a multilevel, clustered setting (i.e., of multilevel, multifactor experiments). We conduct Monte Carlo simulations to demonstrate how design elements-such as the number of clusters, the number of lower-level units, and the intraclass correlation-affect power. Our results suggest that multilevel, multifactor experiments are feasible for factor-screening purposes because of the economical properties of complete and fractional factorial experimental designs. We also discuss resources for sample size planning and power estimation for multilevel factorial experiments. These results are discussed from a resource management perspective, in which the goal is to choose a design that maximizes the scientific benefit using the resources available for an investigation. (c) 2012 APA, all rights reserved

Generalized Subset Designs in Analytical Chemistry.

PubMed

Surowiec, Izabella; Vikström, Ludvig; Hector, Gustaf; Johansson, Erik; Vikström, Conny; Trygg, Johan

2017-06-20

Design of experiments (DOE) is an established methodology in research, development, manufacturing, and production for screening, optimization, and robustness testing. Two-level fractional factorial designs remain the preferred approach due to high information content while keeping the number of experiments low. These types of designs, however, have never been extended to a generalized multilevel reduced design type that would be capable to include both qualitative and quantitative factors. In this Article we describe a novel generalized fractional factorial design. In addition, it also provides complementary and balanced subdesigns analogous to a fold-over in two-level reduced factorial designs. We demonstrate how this design type can be applied with good results in three different applications in analytical chemistry including (a) multivariate calibration using microwave resonance spectroscopy for the determination of water in tablets, (b) stability study in drug product development, and (c) representative sample selection in clinical studies. This demonstrates the potential of generalized fractional factorial designs to be applied in many other areas of analytical chemistry where representative, balanced, and complementary subsets are required, especially when a combination of quantitative and qualitative factors at multiple levels exists.

Musk as a Pheromone? Didactic Exercise.

ERIC Educational Resources Information Center

Bersted, Chris T.

A classroom/laboratory exercise has been used to introduce college students to factorial research designs, differentiate between interpretations for experimental and quasi-experimental variables, and exemplify application of laboratory research methods to test practical questions (advertising claims). The exercise involves having randomly divided…

Power Terminal Communication Access Network Monitoring System Scheme Based on Design Patterns

NASA Astrophysics Data System (ADS)

Yan, Shengchao; Wu, Desheng; Zhu, Jiang

2018-01-01

In order to realize patterns design for terminal communication monitoring system, this paper introduces manager-workers, tasks-workers design patterns, based on common design patterns such as factory method, chain of responsibility, facade. Using these patterns, the communication monitoring system which combines module-groups like networking communication, business data processing and the peripheral support has been designed successfully. Using these patterns makes this system have great flexibility and scalability and improves the degree of systematic pattern design structure.

A systematic approach to designing statistically powerful heteroscedastic 2 × 2 factorial studies while minimizing financial costs.

PubMed

Jan, Show-Li; Shieh, Gwowen

2016-08-31

The 2 × 2 factorial design is widely used for assessing the existence of interaction and the extent of generalizability of two factors where each factor had only two levels. Accordingly, research problems associated with the main effects and interaction effects can be analyzed with the selected linear contrasts. To correct for the potential heterogeneity of variance structure, the Welch-Satterthwaite test is commonly used as an alternative to the t test for detecting the substantive significance of a linear combination of mean effects. This study concerns the optimal allocation of group sizes for the Welch-Satterthwaite test in order to minimize the total cost while maintaining adequate power. The existing method suggests that the optimal ratio of sample sizes is proportional to the ratio of the population standard deviations divided by the square root of the ratio of the unit sampling costs. Instead, a systematic approach using optimization technique and screening search is presented to find the optimal solution. Numerical assessments revealed that the current allocation scheme generally does not give the optimal solution. Alternatively, the suggested approaches to power and sample size calculations give accurate and superior results under various treatment and cost configurations. The proposed approach improves upon the current method in both its methodological soundness and overall performance. Supplementary algorithms are also developed to aid the usefulness and implementation of the recommended technique in planning 2 × 2 factorial designs.

Factorial Design: An Eight Factor Experiment Using Paper Helicopters

NASA Technical Reports Server (NTRS)

Kozma, Michael

1996-01-01

The goal of this paper is to present the analysis of the multi-factor experiment (factorial design) conducted in EG490, Junior Design at Loyola College in Maryland. The discussion of this paper concludes the experimental analysis and ties the individual class papers together.

Algorithm for designing smart factory Industry 4.0

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The designing task of production division of the Industry 4.0 item designing company is being studied. The authors proposed an algorithm, which is based on the modified V L Volkovich method. This algorithm allows generating options how to arrange the production with robotized technological equipment functioning in the automatic mode. The optimization solution of the multi-criteria task for some additive criteria is the base of the algorithm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai

Similar to a super B-factory, a circular Higgs factory will require strong focusing systems near the interaction points and a low-emittance lattice in arcs to achieve a factory luminosity. At electron beam energy of 120 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at 2 percent level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of circular Higgs factory. In this paper, an example will be provided to illustrate the beam dynamics in circular Higgs factory,more » emphasizing on the chromatic optics. Basic optical modules and advanced analysis will be presented. Most important, we will show that 2% momentum aperture is achievable« less

In Silico Constraint-Based Strain Optimization Methods: the Quest for Optimal Cell Factories

PubMed Central

Maia, Paulo; Rocha, Miguel

2015-01-01

SUMMARY Shifting from chemical to biotechnological processes is one of the cornerstones of 21st century industry. The production of a great range of chemicals via biotechnological means is a key challenge on the way toward a bio-based economy. However, this shift is occurring at a pace slower than initially expected. The development of efficient cell factories that allow for competitive production yields is of paramount importance for this leap to happen. Constraint-based models of metabolism, together with in silico strain design algorithms, promise to reveal insights into the best genetic design strategies, a step further toward achieving that goal. In this work, a thorough analysis of the main in silico constraint-based strain design strategies and algorithms is presented, their application in real-world case studies is analyzed, and a path for the future is discussed. PMID:26609052

[Study of combined effects of DES and EV on the proliferation of MCF-7 cells by two experimental designs].

PubMed

Liu, Qian; Lei, Bing-Li; An, Jing; Shang, Yu; Zhong, Yu-Fang; Kang, Jia; Wen, Yu

2013-08-01

The single toxicity of diethylstilbestrol (DES) and beta-estradiol 17-valerate (EV) and the joint toxicity of their binary mixtures in equiconcentration to the proliferation of MCF-7 cells were investigated, respectively. Additive index (AI) method was adopted to evaluate the joint toxicity effect. At the same time, 3 x 3 factorial experimental design was used to verify the joint toxiciy types derived from equiconcentration of DES and EV. The results show that the EC50 values of single EV and DES for 24, 48 and 72 h are 6.02, 0.40 and 0.33 nmol x L(-1) and 5.90, 6.98 and 2.90 nmol x L(-1), respectively. The EC50 values of the binary mixtures of DES and EV for 24, 48 and 72 h are 2.33, 0.71 and 0.39 nmol x L(-1). The binary joint effects of DES and EV for 24 h were synergistic, and the joint effects of DES and EV for 48 and 72 h were antagonistic. But synergistic and antagonistic effects are not strong; their values can be found close to the values of additive effects. Factorial experiment results show that combined effects of DES and EV to proliferation of MCF-7 cells for 24, 48 and 72 h three exposure periods are additive effect types. The consistent joint combined effect types can be drawn from both factorial experimental design and equiconcentration ratio of DES and EV to the proliferation of MCF-7 cells. However, the factorial experimental design is simpler and more convenient, and can avoid unnecessary mistakes due to the derivation of EC50 values.

Construction of social value or utility-based health indices: the usefulness of factorial experimental design plans.

PubMed

Cadman, D; Goldsmith, C

1986-01-01

Global indices, which aggregate multiple health or function attributes into a single summary indicator, are useful measures in health research. Two key issues must be addressed in the initial stages of index construction from the universe of possible health and function attributes, which ones should be included in a new index? and how simple can the statistical model be to combine attributes into a single numeric index value? Factorial experimental designs were used in the initial stages of developing a function index for evaluating a program for the care of young handicapped children. Beginning with eight attributes judged important to the goals of the program by clinicians, social preference values for different function states were obtained from 32 parents of handicapped children and 32 members of the community. Using category rating methods each rater scored 16 written multi-attribute case descriptions which contained information about a child's status for all eight attributes. Either a good or poor level of each function attribute and age 3 or 5 years were described in each case. Thus, 2(8) = 256 different cases were rated. Two factorial design plans were selected and used to allocate case descriptions to raters. Analysis of variance determined that seven of the eight clinician selected attributes were required in a social value based index for handicapped children. Most importantly, the subsequent steps of index construction could be greatly simplified by the finding that a simple additive statistical model without complex attribute interaction terms was adequate for the index. We conclude that factorial experimental designs are an efficient, feasible and powerful tool for the initial stages of constructing a multi-attribute health index.

Post-Fisherian Experimentation: From Physical to Virtual

DOE PAGES

Jeff Wu, C. F.

2014-04-24

Fisher's pioneering work in design of experiments has inspired further work with broader applications, especially in industrial experimentation. Three topics in physical experiments are discussed: principles of effect hierarchy, sparsity, and heredity for factorial designs, a new method called CME for de-aliasing aliased effects, and robust parameter design. The recent emergence of virtual experiments on a computer is reviewed. Here, some major challenges in computer experiments, which must go beyond Fisherian principles, are outlined.

Development and validation of LC-MS/MS method for the quantification of oxcarbazepine in human plasma using an experimental design.

PubMed

Srinubabu, Gedela; Ratnam, Bandaru Veera Venkata; Rao, Allam Appa; Rao, Medicherla Narasimha

2008-01-01

A rapid tandem mass spectrometric (MS-MS) method for the quantification of Oxcarbazepine (OXB) in human plasma using imipramine as an internal standard (IS) has been developed and validated. Chromatographic separation was achieved isocratically on a C18 reversed-phase column within 3.0 min, using a mobile phase of acetonitrile-10 mM ammonium formate (90 : 10 v/v) at a flow rate of 0.3 ml/min. Quantitation was achieved using multiple reaction monitoring (MRM) scan at MRM transitions m/z 253>208 and m/z 281>86 for OXB and the IS respectively. Calibration curves were linear over the concentration range of 0.2-16 mug/ml (r>0.999) with a limit of quantification of 0.2 mug/ml. Analytical recoveries of OXB from spiked human plasma were in the range of 74.9 to 76.3%. Plackett-Burman design was applied for screening of chromatographic and mass spectrometric factors; factorial design was applied for optimization of essential factors for the robustness study. A linear model was postulated and a 2(3) full factorial design was employed to estimate the model coefficients for intermediate precision. More specifically, experimental design helps the researcher to verify if changes in factor values produce a statistically significant variation of the observed response. The strategy is most effective if statistical design is used in most or all stages of the screening and optimizing process for future method validation of pharmacokinetic and bioequivalence studies.

An algorithm for generating all possible 2(p-q) fractional factorial designs and its use in scientific experimentation

NASA Technical Reports Server (NTRS)

Sidik, S. M.

1973-01-01

An algorithm and computer program are presented for generating all the distinct 2(p-q) fractional factorial designs. Some applications of this algorithm to the construction of tables of designs and of designs for nonstandard situations and its use in Bayesian design are discussed. An appendix includes a discussion of an actual experiment whose design was facilitated by the algorithm.

A Systematic Approach of Employing Quality by Design Principles: Risk Assessment and Design of Experiments to Demonstrate Process Understanding and Identify the Critical Process Parameters for Coating of the Ethylcellulose Pseudolatex Dispersion Using Non-Conventional Fluid Bed Process.

PubMed

Kothari, Bhaveshkumar H; Fahmy, Raafat; Claycamp, H Gregg; Moore, Christine M V; Chatterjee, Sharmista; Hoag, Stephen W

2017-05-01

The goal of this study was to utilize risk assessment techniques and statistical design of experiments (DoE) to gain process understanding and to identify critical process parameters for the manufacture of controlled release multiparticulate beads using a novel disk-jet fluid bed technology. The material attributes and process parameters were systematically assessed using the Ishikawa fish bone diagram and failure mode and effect analysis (FMEA) risk assessment methods. The high risk attributes identified by the FMEA analysis were further explored using resolution V fractional factorial design. To gain an understanding of the processing parameters, a resolution V fractional factorial study was conducted. Using knowledge gained from the resolution V study, a resolution IV fractional factorial study was conducted; the purpose of this IV study was to identify the critical process parameters (CPP) that impact the critical quality attributes and understand the influence of these parameters on film formation. For both studies, the microclimate, atomization pressure, inlet air volume, product temperature (during spraying and curing), curing time, and percent solids in the coating solutions were studied. The responses evaluated were percent agglomeration, percent fines, percent yield, bead aspect ratio, median particle size diameter (d50), assay, and drug release rate. Pyrobuttons® were used to record real-time temperature and humidity changes in the fluid bed. The risk assessment methods and process analytical tools helped to understand the novel disk-jet technology and to systematically develop models of the coating process parameters like process efficiency and the extent of curing during the coating process.

Factorial design studies of antiretroviral drug-loaded stealth liposomal injectable: PEGylation, lyophilization and pharmacokinetic studies

NASA Astrophysics Data System (ADS)

Sudhakar, Beeravelli; Krishna, Mylangam Chaitanya; Murthy, Kolapalli Venkata Ramana

2016-01-01

The aim of the present study was to formulate and evaluate the ritonavir-loaded stealth liposomes by using 32 factorial design and intended to delivered by parenteral delivery. Liposomes were prepared by ethanol injection method using 32 factorial designs and characterized for various physicochemical parameters such as drug content, size, zeta potential, entrapment efficiency and in vitro drug release. The optimization process was carried out using desirability and overlay plots. The selected formulation was subjected to PEGylation using 10 % PEG-10000 solution. Stealth liposomes were characterized for the above-mentioned parameters along with surface morphology, Fourier transform infrared spectrophotometer, differential scanning calorimeter, stability and in vivo pharmacokinetic studies in rats. Stealth liposomes showed better result compared to conventional liposomes due to effect of PEG-10000. The in vivo studies revealed that stealth liposomes showed better residence time compared to conventional liposomes and pure drug solution. The conventional liposomes and pure drug showed dose-dependent pharmacokinetics, whereas stealth liposomes showed long circulation half-life compared to conventional liposomes and pure ritonavir solution. The results of statistical analysis showed significance difference as the p value is (<0.05) by one-way ANOVA. The result of the present study revealed that stealth liposomes are promising tool in antiretroviral therapy.

A Sino-Finnish Initiative for Experimental Teaching Practices Using the Design Factory Pedagogical Platform

ERIC Educational Resources Information Center

Björklund, Tua A.; Nordström, Katrina M.; Clavert, Maria

2013-01-01

The paper presents a Sino-Finnish teaching initiative, including the design and experiences of a series of pedagogical workshops implemented at the Aalto-Tongji Design Factory (DF), Shanghai, China, and the experimentation plans collected from the 54 attending professors and teachers. The workshops aimed to encourage trying out interdisciplinary…

Cyber and physical equipment digital control system in Industry 4.0 item designing company

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-05-01

The problem of organization of digital control of the item designing company equipped with cyber and physical systems is being studied. A scheme of cyber and physical systems and personnel interaction in the Industry 4.0 smart factory company is presented. A scheme of assembly units transportation in the Industry 4.0 smart factory company is provided. A scheme of digital control system in the Industry 4.0 smart factory company is given.

Improving Junior High School Students' Mathematical Analogical Ability Using Discovery Learning Method

ERIC Educational Resources Information Center

Maarif, Samsul

2016-01-01

The aim of this study was to identify the influence of discovery learning method towards the mathematical analogical ability of junior high school's students. This is a research using factorial design 2x2 with ANOVA-Two ways. The population of this research included the entire students of SMPN 13 Jakarta (State Junior High School 13 of Jakarta)…

Development of a Novel Screening Method for the Isolation of “Cronobacter” spp. (Enterobacter sakazakii)▿

PubMed Central

Iversen, Carol; Druggan, Patrick; Schumacher, Sandra; Lehner, Angelika; Feer, Claudia; Gschwend, Karl; Joosten, Han; Stephan, Roger

2008-01-01

A differential medium, “Cronobacter” screening broth, has been designed to complement agars based on hydrolysis of chromogenic α-glucopyranoside substrates. The broth was evaluated using 329 Enterobacteriaceae strains (229 target isolates), spiked/naturally contaminated samples, and a parallel comparison with current methods for raw materials, line/end products, and factory environment samples. PMID:18310415

Measurement of Employability Skills on Teaching Factory Learning

NASA Astrophysics Data System (ADS)

Subekti, S.; Ana, A.

2018-02-01

Vocational High Schools as one of the educational institutions that has the responsibility in preparing skilled labors has a challenge to improve the quality of human resources as a candidate for skilled labors, to compete and survive in a changing climate of work. BPS noted an increase in the number of non-worker population (BAK) in 2015-2017 on vocational graduates as many as 564,272 people. The ability to adapt and maintain jobs in a variety of conditions is called employability skills. This study purpose to measure the development of employability skills of communication skills, problem-solving skills and teamwork skills on the implementation of teaching factory learning in SMK Negeri 1 Cibadak, THPH Skills Program on bakery competency. This research uses mixed method, with concurrent triangulation mix methods research design. Data collection techniques used interviews and questionnaires. The result shows that there are increasing students’ employability skills in communication skills, problem solving skills, and teamwork skills in teaching factory learning. Principles of learning that apply learning by doing student centering and learning arrangements such as situations and conditions in the workplace have an impact on improving student employability skills.

Bioretention Systems: Partial Factorial Designs for Nitrate Removal

EPA Science Inventory

Changes in nutrient loadings are monitored by introducing captured stormwater runoff into eight outdoor rain gardens at EPA’s Urban Water Research Facility in Edison, New Jersey scaled for residential and urban landscapes. The partial factorial design includes non-vegetated meso...

Midlands Teaching Factory, LTD.

ERIC Educational Resources Information Center

Midlands Technical Coll., Columbia, SC.

In 1987, Midlands Technical College (MTC), in Columbia, South Carolina, initiated a Computer Integrated Manufacturing (CIM) project, the Midlands Teaching Factory, LTD, which integrated various college departments with the goal of manufacturing a high quality, saleable product. The faculty developed a teaching factory model which was designed to…

Development of braided rope engine seals

NASA Technical Reports Server (NTRS)

Ko, Frank K.; Cai, Zhong; Mutharasan, Rajakkannu; Steinetz, Bruce M.

1994-01-01

In this study, after reviewing current seal design concepts, the potential of textile structures for seal design is examined from the material, structural, and fabrication points of view. Braided structures are identified as potential candidates for hypersonic seal structures because of their conformability and design flexibility. A large family of braided structures using 2-D and 3-D architecture can be designed using well established methods to produce a wide range of braiding yarn orientation for wear resistance as well as seal porosity control. As a first demonstration of the approach, 2-D braided fiberglass seals were fabricated according to a factorial design experiment by varying braiding angles, fractional longitudinal fibers, and preload pressure levels. Factorial diagrams and response surfaces were constructed to elucidate the inter-relationship of the braiding parameters as well as the effect of preload pressures on leakage resistance of the seal. It was found that seal resistance is a strong function of fractional longitudinal fiber content. As braiding angle increases, seal leakage resistance increases, especially at high preload pressures and in seals having high proportion of longitudinal fibers.

Analytical Enantio-Separation of Linagliptin in Linagliptin and Metformin HCl Dosage Forms by Applying Two-Level Factorial Design.

PubMed

Jadhav, Sushant B; Mane, Rahul M; Narayanan, Kalyanraman L; Bhosale, Popatrao N

2016-10-17

A novel, stability indicating, reverse phase high-performance liquid chromatography (RP-HPLC) method was developed to determine the S -isomer of linagliptin (LGP) in linagliptin and metformin hydrochloride (MET HCl) tablets (LGP-MET HCl) by implementing design of experiment (DoE), i.e., two-level, full factorial design (2³ + 3 centre points = 11 experiments) to understand the critical method parameters (CMP) and its relation with the critical method attribute (CMA), and to ensure robustness of the method. The separation of the S -isomer, LGP and MET HCl in the presence of their impurities was achieved on Chiralpak ® IA-3 ( Amylose tris (3, 5-dimethylphenylcarbamate ), immobilized on 3 µm silica gel) stationary phase (250 × 4.6 mm, 3 µm) using isocratic elution and detector wavelength at 225 nm with a flow rate of 0.5 mL·min -1 , an injection volume of 10 µL with a sample cooler (5 °C) and column oven temperature of 25 °C. Ethanol:Methanol:Monoethanolamine (EtOH:MeOH:MEA) in the ratio of 60:40:0.2 v / v / v was used as a mobile phase. The developed method was validated in accordance with international council for harmonisation (ICH) guidelines and was applied for the estimation of the S -isomer of LGP in LGP-MET HCl tablets. The same method also can be extended for the estimation of the S -isomer in LGP dosage forms.

Screening Experiments and the Use of Fractional Factorial Designs in Behavioral Intervention Research

PubMed Central

Nair, Vijay; Strecher, Victor; Fagerlin, Angela; Ubel, Peter; Resnicow, Kenneth; Murphy, Susan; Little, Roderick; Chakraborty, Bibhas; Zhang, Aijun

2008-01-01

Health behavior intervention studies have focused primarily on comparing new programs and existing programs via randomized controlled trials. However, numbers of possible components (factors) are increasing dramatically as a result of developments in science and technology (e.g., Web-based surveys). These changes dictate the need for alternative methods that can screen and quickly identify a large set of potentially important treatment components. We have developed and implemented a multiphase experimentation strategy for accomplishing this goal. We describe the screening phase of this strategy and the use of fractional factorial designs (FFDs) in studying several components economically. We then use 2 ongoing behavioral intervention projects to illustrate the usefulness of FFDs. FFDs should be supplemented with follow-up experiments in the refining phase so any critical assumptions about interactions can be verified. PMID:18556602

Novel Starch-PVA Polymer for Microparticle Preparation and Optimization Using Factorial Design Study

PubMed Central

Chattopadhyay, Helen; De, Amit Kumar; Datta, Sriparna

2015-01-01

The aim of our present work was to optimize the ratio of a very novel polymer, starch-polyvinyl alcohol (PVA), for controlled delivery of Ornidazole. Polymer-coated drug microparticles were prepared by emulsion method. Microscopic study, scanning electron microscopic study, and atomic force microscopic study revealed that the microparticles were within 10 micrometers of size with smooth spherical shape. The Fourier transform infrared spectroscopy showed absence of drug polymer interaction. A statistical 32 full factorial design was used to study the effect of different concentration of starch and PVA on the drug release profile. The three-dimensional plots gave us an idea about the contribution of each factor on the release kinetics. Hence this novel polymer of starch and polyvinyl alcohol can be utilized for control release of the drug from a targeted delivery device. PMID:27347511

Evaluating the Properties of Poly(lactic-co-glycolic acid) Nanoparticle Formulations Encapsulating a Hydrophobic Drug by Using the Quality by Design Approach.

PubMed

Kozaki, Masato; Kobayashi, Shin-Ichiro; Goda, Yukihiro; Okuda, Haruhiro; Sakai-Kato, Kumiko

2017-01-01

We applied the Quality by Design (QbD) approach to the development of poly(lactic-co-glycolic acid) (PLGA) nanoparticle formulations encapsulating triamcinolone acetonide, and the critical process parameters (CPPs) were identified to clarify the correlations between critical quality attributes and CPPs. Quality risk management was performed by using an Ishikawa diagram and experiments with a fractional factorial design (ANOVA). The CPPs for particle size were PLGA concentration and rotation speed, and the CPP for relative drug loading efficiency was the poor solvent to good solvent volume ratio. By assessing the mutually related factors in the form of ratios, many factors could be efficiently considered in the risk assessment. We found a two-factor interaction between rotation speed and rate of addition of good solvent by using a fractional factorial design with resolution V. The system was then extended by using a central composite design, and the results obtained were visualized by using the response surface method to construct a design space. Our research represents a case study of the application of the QbD approach to pharmaceutical development, including formulation screening, by taking actual production factors into consideration. Our findings support the feasibility of using a similar approach to nanoparticle formulations under development. We could establish an efficient method of analyzing the CPPs of PLGA nanoparticles by using a QbD approach.

The Factorial Survey: Design Selection and its Impact on Reliability and Internal Validity

ERIC Educational Resources Information Center

Dülmer, Hermann

2016-01-01

The factorial survey is an experimental design consisting of varying situations (vignettes) that have to be judged by respondents. For more complex research questions, it quickly becomes impossible for an individual respondent to judge all vignettes. To overcome this problem, random designs are recommended most of the time, whereas quota designs…

Design optimization of condenser microphone: a design of experiment perspective.

PubMed

Tan, Chee Wee; Miao, Jianmin

2009-06-01

A well-designed condenser microphone backplate is very important in the attainment of good frequency response characteristics--high sensitivity and wide bandwidth with flat response--and low mechanical-thermal noise. To study the design optimization of the backplate, a 2(6) factorial design with a single replicate, which consists of six backplate parameters and four responses, has been undertaken on a comprehensive condenser microphone model developed by Zuckerwar. Through the elimination of insignificant parameters via normal probability plots of the effect estimates, the projection of an unreplicated factorial design into a replicated one can be performed to carry out an analysis of variance on the factorial design. The air gap and slot have significant effects on the sensitivity, mechanical-thermal noise, and bandwidth while the slot/hole location interaction has major influence over the latter two responses. An organized and systematic approach of designing the backplate is summarized.

24 CFR 3280.208 - Smoke alarm requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... basement and must install at the factory an electrical junction box for the installation of this smoke... when a home is equipped or designed for future installation of a roof-mounted evaporative cooler or... system must be mounted on an electrical outlet box and connected by a permanent wiring method to a...

Attributing Responsibility for Child Maltreatment when Domestic Violence Is Present

ERIC Educational Resources Information Center

Landsman, Miriam J.; Hartley, Carolyn Copps

2007-01-01

Objective: The purpose of this study was to examine factors that influence how child welfare workers attribute responsibility for child maltreatment and child safety in cases involving domestic violence. Methods: The study used a factorial survey approach, combining elements of survey research with an experimental design. Case vignettes were…

Testing whether decision aids introduce cognitive biases: results of a randomized trial.

PubMed

Ubel, Peter A; Smith, Dylan M; Zikmund-Fisher, Brian J; Derry, Holly A; McClure, Jennifer; Stark, Azadeh; Wiese, Cheryl; Greene, Sarah; Jankovic, Aleksandra; Fagerlin, Angela

2010-08-01

Women at high risk of breast cancer face a difficult decision whether to take medications like tamoxifen to prevent a first breast cancer diagnosis. Decision aids (DAs) offer a promising method of helping them make this decision. But concern lingers that DAs might introduce cognitive biases. We recruited 663 women at high risk of breast cancer and presented them with a DA designed to experimentally test potential methods of identifying and reducing cognitive biases that could influence this decision, by varying specific aspects of the DA across participants in a factorial design. Participants were susceptible to a cognitive bias - an order effect - such that those who learned first about the risks of tamoxifen thought more favorably of the drug than women who learned first about the benefits. This order effect was eliminated among women who received additional information about competing health risks. We discovered that the order of risk/benefit information influenced women's perceptions of tamoxifen. This bias was eliminated by providing contextual information about competing health risks. We have demonstrated the feasibility of using factorial experimental designs to test whether DAs introduce cognitive biases, and whether specific elements of DAs can reduce such biases. Published by Elsevier Ireland Ltd.

A new efficient mixture screening design for optimization of media.

PubMed

Rispoli, Fred; Shah, Vishal

2009-01-01

Screening ingredients for the optimization of media is an important first step to reduce the many potential ingredients down to the vital few components. In this study, we propose a new method of screening for mixture experiments called the centroid screening design. Comparison of the proposed design with Plackett-Burman, fractional factorial, simplex lattice design, and modified mixture design shows that the centroid screening design is the most efficient of all the designs in terms of the small number of experimental runs needed and for detecting high-order interaction among ingredients. (c) 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009.

An Analysis of Fixed Wing Tactical Airlifter Characteristics Using an Intra-Theater Airlift Computer Model

DTIC Science & Technology

1991-09-01

an Experimental Design ...... 31 Selection of Variables .................... ... 34 Defining Measures of Effectiveness ....... 37 Specification of...Required Number of Replications 44 Modification of Scenario Files ......... ... 46 Analysis of the Main Effects of a Two Level Factorial Design ...48 Analysis of the Interaction Effects of a *Two Level Factorial Design .. ............. ... 49 Yate’s Algorithm ......... ................ 50

Experimental studies of two-stage centrifugal dust concentrator

NASA Astrophysics Data System (ADS)

Vechkanova, M. V.; Fadin, Yu M.; Ovsyannikov, Yu G.

2018-03-01

The article presents data of experimental results of two-stage centrifugal dust concentrator, describes its design, and shows the development of a method of engineering calculation and laboratory investigations. For the experiments, the authors used quartz, ceramic dust and slag. Experimental dispersion analysis of dust particles was obtained by sedimentation method. To build a mathematical model of the process, dust collection was built using central composite rotatable design of the four factorial experiment. A sequence of experiments was conducted in accordance with the table of random numbers. Conclusion were made.

Bayesian adaptive phase II screening design for combination trials

PubMed Central

Cai, Chunyan; Yuan, Ying; Johnson, Valen E

2013-01-01

Background Trials of combination therapies for the treatment of cancer are playing an increasingly important role in the battle against this disease. To more efficiently handle the large number of combination therapies that must be tested, we propose a novel Bayesian phase II adaptive screening design to simultaneously select among possible treatment combinations involving multiple agents. Methods Our design is based on formulating the selection procedure as a Bayesian hypothesis testing problem in which the superiority of each treatment combination is equated to a single hypothesis. During the trial conduct, we use the current values of the posterior probabilities of all hypotheses to adaptively allocate patients to treatment combinations. Results Simulation studies show that the proposed design substantially outperforms the conventional multiarm balanced factorial trial design. The proposed design yields a significantly higher probability for selecting the best treatment while allocating substantially more patients to efficacious treatments. Limitations The proposed design is most appropriate for the trials combining multiple agents and screening out the efficacious combination to be further investigated. Conclusions The proposed Bayesian adaptive phase II screening design substantially outperformed the conventional complete factorial design. Our design allocates more patients to better treatments while providing higher power to identify the best treatment at the end of the trial. PMID:23359875

Designing Studies That Would Address the Multilayered Nature of Health Care

PubMed Central

Pennell, Michael; Rhoda, Dale; Hade, Erinn M.; Paskett, Electra D.

2010-01-01

We review design and analytic methods available for multilevel interventions in cancer research with particular attention to study design, sample size requirements, and potential to provide statistical evidence for causal inference. The most appropriate methods will depend on the stage of development of the research and whether randomization is possible. Early on, fractional factorial designs may be used to screen intervention components, particularly when randomization of individuals is possible. Quasi-experimental designs, including time-series and multiple baseline designs, can be useful once the intervention is designed because they require few sites and can provide the preliminary evidence to plan efficacy studies. In efficacy and effectiveness studies, group-randomized trials are preferred when randomization is possible and regression discontinuity designs are preferred otherwise if assignment based on a quantitative score is possible. Quasi-experimental designs may be used, especially when combined with recent developments in analytic methods to reduce bias in effect estimates. PMID:20386057

Assessment of Tooth Wear Among Glass Factory Workers: WHO 2013 Oral Health Survey

PubMed Central

Bhat, Nagesh; Asawa, Kailash; Tak, Mridula; Bapat, Salil; Gupta, Vivek Vardhan

2015-01-01

Background Glass factory workers are often exposed to the hazardous environment that leads to deleterious oral health and subsequently, general health. We planned to determine the effects of the particulates present in the milieu on the tooth wear among workers. Aim To assess tooth wear among glass factory workers in Jaipur, Rajasthan, India. Settings and Design A descriptive cross-sectional survey was conducted among 936 glass workers in Jaipur, Rajasthan, India from January-June 2014. Materials and Methods A survey proforma was designed for tooth wear evaluation with the help of WHO Oral Health Assessment form 2013 (for adults). Information regarding oral health practices, adverse habits and dietary habits, demographic details was gathered and clinical parameters were recorded. Statistical Analysis The Chi–square test, t–test, One-way Analysis of Variance and a Stepwise multiple linear regression analysis. Results The most prevalent form of erosion was enamel erosion (589, 62.93%) with few subjects of deeper dentinal erosion and the difference was statistically significant (p=0.001). Dental erosion was found to be higher among males compared to females. Years of experience and educational status were identified as best predictors for dental erosion. Conclusion It was concluded that there was considerable evidence of dental erosion found among the factory workers. Due to ignorance on social, cultural and health aspects, professional approach with regular dental care services for detection of early symptoms and planning of preventive strategies is warranted. PMID:26436050

Guidelines for the design and statistical analysis of experiments in papers submitted to ATLA.

PubMed

Festing, M F

2001-01-01

In vitro experiments need to be well designed and correctly analysed if they are to achieve their full potential to replace the use of animals in research. An "experiment" is a procedure for collecting scientific data in order to answer a hypothesis, or to provide material for generating new hypotheses, and differs from a survey because the scientist has control over the treatments that can be applied. Most experiments can be classified into one of a few formal designs, the most common being completely randomised, and randomised block designs. These are quite common with in vitro experiments, which are often replicated in time. Some experiments involve a single independent (treatment) variable, while other "factorial" designs simultaneously vary two or more independent variables, such as drug treatment and cell line. Factorial designs often provide additional information at little extra cost. Experiments need to be carefully planned to avoid bias, be powerful yet simple, provide for a valid statistical analysis and, in some cases, have a wide range of applicability. Virtually all experiments need some sort of statistical analysis in order to take account of biological variation among the experimental subjects. Parametric methods using the t test or analysis of variance are usually more powerful than non-parametric methods, provided the underlying assumptions of normality of the residuals and equal variances are approximately valid. The statistical analyses of data from a completely randomised design, and from a randomised-block design are demonstrated in Appendices 1 and 2, and methods of determining sample size are discussed in Appendix 3. Appendix 4 gives a checklist for authors submitting papers to ATLA.

The Use of a Fractional Factorial Design to Determine the Factors That Impact 1,3-Propanediol Production from Glycerol by Halanaerobium hydrogeniformans.

PubMed

Kalia, Shivani; Trager, Jordan; Sitton, Oliver C; Mormile, Melanie R

2016-08-20

In recent years, biodiesel, a substitute for fossil fuels, has led to the excessive production of crude glycerol. The resulting crude glycerol can possess a high concentration of salts and an alkaline pH. Moreover, current crude glycerol purification methods are expensive, rendering this former commodity a waste product. However, Halanaerobium hydrogeniformans, a haloalkaliphilic bacterium, possesses the metabolic capability to convert glycerol into 1,3-propanediol, a valuable commodity compound, without the need for salt dilution or adjusting pH when grown on this waste. Experiments were performed with different combinations of 24 medium components to determine their impact on the production of 1,3-propanediol by using a fractional factorial design. Tested medium components were selected based on data from the organism's genome. Analysis of HPLC data revealed enhanced production of 1,3-propanediol with additional glycerol, pH, vitamin B12, ammonium ions, sodium sulfide, cysteine, iron, and cobalt. However, other selected components; nitrate ions, phosphate ions, sulfate ions, sodium:potassium ratio, chloride, calcium, magnesium, silicon, manganese, zinc, borate, nickel, molybdenum, tungstate, copper and aluminum, did not enhance 1,3-propanediol production. The use of a fractional factorial design enabled the quick and efficient assessment of the impact of 24 different medium components on 1,3-propanediol production from glycerol from a haloalkaliphilic bacterium.

A Classroom of Polymer Factories.

ERIC Educational Resources Information Center

Harris, Mary E.; Van Natta, Sandra

1998-01-01

Provides an activity in which students create small classroom factories and investigate several aspects of production including design, engineering, quality control, waste management, packaging, shipment, and communication. (DDR)

Integrating PCLIPS into ULowell's Lincoln Logs: Factory of the future

NASA Technical Reports Server (NTRS)

Mcgee, Brenda J.; Miller, Mark D.; Krolak, Patrick; Barr, Stanley J.

1990-01-01

We are attempting to show how independent but cooperating expert systems, executing within a parallel production system (PCLIPS), can operate and control a completely automated, fault tolerant prototype of a factory of the future (The Lincoln Logs Factory of the Future). The factory consists of a CAD system for designing the Lincoln Log Houses, two workcells, and a materials handling system. A workcell consists of two robots, part feeders, and a frame mounted vision system.

Using Blocked Fractional Factorial Designs to Construct Discrete Choice Experiments for Health Care Studies

PubMed Central

Jaynes, Jessica; Wong, Weng Kee; Xu, Hongquan

2016-01-01

Discrete choice experiments (DCEs) are increasingly used for studying and quantifying subjects preferences in a wide variety of health care applications. They provide a rich source of data to assess real-life decision making processes, which involve trade-offs between desirable characteristics pertaining to health and health care, and identification of key attributes affecting health care. The choice of the design for a DCE is critical because it determines which attributes’ effects and their interactions are identifiable. We apply blocked fractional factorial designs to construct DCEs and address some identification issues by utilizing the known structure of blocked fractional factorial designs. Our design techniques can be applied to several situations including DCEs where attributes have different number of levels. We demonstrate our design methodology using two health care studies to evaluate (1) asthma patients’ preferences for symptom-based outcome measures, and (2) patient preference for breast screening services. PMID:26823156

Enhanced NDE systems

NASA Technical Reports Server (NTRS)

1993-01-01

The goal of this contractual effort was to evaluate the Langley narrow-band ultrasonic debond detection method for a factory use configuration. Successful accomplishment requires establishing the robustness of the method, and enhancing it if necessary. It is also desirable to strive for simplicity of implementation, such as attachment to in-place scanning devices planned for nondestructive evaluation (NDE) measurements. The contract was established with three phases for the ultrasonic work: (1) establish the method and robustness of the ultrasonic method; (2) follow up on any questions which arise with respect to the method or its implementation and produce a Phase A design; and (3) fabricate and test the Phase A design. This is a report on Phase 1.

The Effectiveness of Tutorial Strategies: An Experimental Evaluation.

ERIC Educational Resources Information Center

Swanson, Judy H.

The effectiveness of three tutorial strategies was evaluated by experimentally manipulating the strategies used in a 2 X 3 factorial design. Two tutors taught 48 college undergraduates a basic optics lesson about "how lenses work," using three instructional methods which varied the amount of tutor control. In the lecture condition, tutors assumed…

Using factorial experimental design to evaluate the separation of plastics by froth flotation.

PubMed

Salerno, Davide; Jordão, Helga; La Marca, Floriana; Carvalho, M Teresa

2018-03-01

This paper proposes the use of factorial experimental design as a standard experimental method in the application of froth flotation to plastic separation instead of the commonly used OVAT method (manipulation of one variable at a time). Furthermore, as is common practice in minerals flotation, the parameters of the kinetic model were used as process responses rather than the recovery of plastics in the separation products. To explain and illustrate the proposed methodology, a set of 32 experimental tests was performed using mixtures of two polymers with approximately the same density, PVC and PS (with mineral charges), with particle size ranging from 2 to 4 mm. The manipulated variables were frother concentration, air flow rate and pH. A three-level full factorial design was conducted. The models establishing the relationships between the manipulated variables and their interactions with the responses (first order kinetic model parameters) were built. The Corrected Akaike Information Criterion was used to select the best fit model and an analysis of variance (ANOVA) was conducted to identify the statistically significant terms of the model. It was shown that froth flotation can be used to efficiently separate PVC from PS with mineral charges by reducing the floatability of PVC, which largely depends on the action of pH. Within the tested interval, this is the factor that most affects the flotation rate constants. The results obtained show that the pure error may be of the same magnitude as the sum of squares of the errors, suggesting that there is significant variability within the same experimental conditions. Thus, special care is needed when evaluating and generalizing the process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Compatible validated spectrofluorimetric and spectrophotometric methods for determination of vildagliptin and saxagliptin by factorial design experiments.

PubMed

Abdel-Aziz, Omar; Ayad, Miriam F; Tadros, Mariam M

2015-04-05

Simple, selective and reproducible spectrofluorimetric and spectrophotometric methods have been developed for the determination of vildagliptin and saxagliptin in bulk and their pharmaceutical dosage forms. The first proposed spectrofluorimetric method is based on the dansylation reaction of the amino group of vildagliptin with dansyl chloride to form a highly fluorescent product. The formed product was measured spectrofluorimetrically at 455 nm after excitation at 345 nm. Beer's law was obeyed in a concentration range of 100-600 μg ml(-1). The second proposed spectrophotometric method is based on the charge transfer complex of saxagliptin with tetrachloro-1,4-benzoquinone (p-chloranil). The formed charge transfer complex was measured spectrophotometrically at 530 nm. Beer's law was obeyed in a concentration range of 100-850 μg ml(-1). The third proposed spectrophotometric method is based on the condensation reaction of the primary amino group of saxagliptin with formaldehyde and acetyl acetone to form a yellow colored product known as Hantzsch reaction, measured at 342.5 nm. Beer's law was obeyed in a concentration range of 50-300 μg ml(-1). All the variables were studied to optimize the reactions' conditions using factorial design. The developed methods were validated and proved to be specific and accurate for quality control of vildagliptin and saxagliptin in their pharmaceutical dosage forms. Copyright © 2015. Published by Elsevier B.V.

Compatible validated spectrofluorimetric and spectrophotometric methods for determination of vildagliptin and saxagliptin by factorial design experiments

NASA Astrophysics Data System (ADS)

Abdel-Aziz, Omar; Ayad, Miriam F.; Tadros, Mariam M.

2015-04-01

Simple, selective and reproducible spectrofluorimetric and spectrophotometric methods have been developed for the determination of vildagliptin and saxagliptin in bulk and their pharmaceutical dosage forms. The first proposed spectrofluorimetric method is based on the dansylation reaction of the amino group of vildagliptin with dansyl chloride to form a highly fluorescent product. The formed product was measured spectrofluorimetrically at 455 nm after excitation at 345 nm. Beer's law was obeyed in a concentration range of 100-600 μg ml-1. The second proposed spectrophotometric method is based on the charge transfer complex of saxagliptin with tetrachloro-1,4-benzoquinone (p-chloranil). The formed charge transfer complex was measured spectrophotometrically at 530 nm. Beer's law was obeyed in a concentration range of 100-850 μg ml-1. The third proposed spectrophotometric method is based on the condensation reaction of the primary amino group of saxagliptin with formaldehyde and acetyl acetone to form a yellow colored product known as Hantzsch reaction, measured at 342.5 nm. Beer's law was obeyed in a concentration range of 50-300 μg ml-1. All the variables were studied to optimize the reactions' conditions using factorial design. The developed methods were validated and proved to be specific and accurate for quality control of vildagliptin and saxagliptin in their pharmaceutical dosage forms.

Formulation of wax oxybenzone microparticles using a factorial approach.

PubMed

Gomaa, Y A; Darwish, I A; Boraei, N A; El-Khordagui, L K

2010-01-01

Oxybenzone wax microparticles (MPs) were prepared by the hydrophobic congealable disperse phase method. The formulation of oxybenzone-loaded MPs was optimized using a 2⁴ experimental design. Factorial analysis indicated that the main MP characteristics were influenced by initial drug loading, emulsification speed, emulsifier concentration and hydrophilic-lipophilic balance. MPs were spherical with 50.5–88.1 μm size range, 17.8–38.9 drug content in mg/100 mg MPs and 33.1–87.2% oxybenzone release in 1 h. A wide range of sunscreen delivery systems suitable for different formulation purposes were generated which may contribute to the advanced formulation of sunscreen products with improved performance.

Defective Reduction in Automotive Headlining Manufacturing Process

NASA Astrophysics Data System (ADS)

Rittichai, Saranya; Chutima, Parames

2016-05-01

In an automobile parts manufacturing company, currently the headlining process has a lot of wastes resulting in a high cost of quality per year. In this paper, the Six Sigma method is used to reduce the defects in the headlining process. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors that affect the quality of headlining. The 2k-1 fractional factorials design was also use to determine the potential preliminary root causes. The full factorial experiments was conducted to identify appropriate settings of the significant factors. The result showed that the process can reduce the defects of headlining from 12.21% to 6.95%

Factorial study of rain garden design for nitrogen removal

EPA Science Inventory

Abstract Nitrate (〖NO〗_3^--N ) removal studies in bioretention systems showed great variability in removal rates and in some cases 〖NO〗_3^--N was exported. A 3-way factorial design (2 x 2 x 4) was devised for eight outdoor un-vegetated rain gardens to evaluate the effects of ...

Estimating the monetary value of willingness to pay for E-book reader's attributes using partially confounded factorial conjoint choice experiment

NASA Astrophysics Data System (ADS)

Yong, Chin-Khian

2013-09-01

A partially confounded factorial conjoint choice experiments design was used to examine the monetary value of the willingness to pay for E-book Reader's attributes. Conjoint analysis is an efficient, cost-effective, and most widely used quantitative method in marketing research to understand consumer preferences and value trade-off. Value can be interpreted by customer or consumer as the received of multiple benefits from a price that was paid. The monetary value of willingness to pay for battery life, internal memory, external memory, screen size, text to Speech, touch screen, and converting handwriting to digital text of E-book reader were estimated in this study. Due to the significant interaction effect of the attributes with the price, the monetary values for the seven attributes were found to be different at different values of odds of purchasing versus not purchasing. The significant interactions effects were one of the main contribution of the partially confounded factorial conjoint choice experiment.

The Skateboard Factory: Curriculum by Design--Oasis Skateboard Factory Q&A with Craig Morrison

ERIC Educational Resources Information Center

Pearson, George

2012-01-01

Since its opening three years ago, Oasis Skateboard Factory (OSF), founded by teacher Craig Morrison, has attracted considerable media exposure and received a Ken Spencer Award from the CEA for its innovative program. OSF is one of three programs offered by Oasis Alternative Secondary School, one of 22 alternative secondary schools of the Toronto…

Clustering Words to Match Conditions: An Algorithm for Stimuli Selection in Factorial Designs

ERIC Educational Resources Information Center

Guasch, Marc; Haro, Juan; Boada, Roger

2017-01-01

With the increasing refinement of language processing models and the new discoveries about which variables can modulate these processes, stimuli selection for experiments with a factorial design is becoming a tough task. Selecting sets of words that differ in one variable, while matching these same words into dozens of other confounding variables…

A Methodology for the Assessment of Experiential Learning Lean: The Lean Experience Factory Study

ERIC Educational Resources Information Center

De Zan, Giovanni; De Toni, Alberto Felice; Fornasier, Andrea; Battistella, Cinzia

2015-01-01

Purpose: The purpose of this paper is to present a methodology to assess the experiential learning processes of learning lean in an innovative learning environment: the lean model factories. Design/methodology/approach: A literature review on learning and lean management literatures was carried out to design the methodology. Then, a case study…

Performing Contrast Analysis in Factorial Designs: From NHST to Confidence Intervals and Beyond

ERIC Educational Resources Information Center

Wiens, Stefan; Nilsson, Mats E.

2017-01-01

Because of the continuing debates about statistics, many researchers may feel confused about how to analyze and interpret data. Current guidelines in psychology advocate the use of effect sizes and confidence intervals (CIs). However, researchers may be unsure about how to extract effect sizes from factorial designs. Contrast analysis is helpful…

Organization of project works in Industry 4.0 digital item designing companies

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-05-01

The task of the project works organization in the Industry 4.0 item designing digital factories is being studied. There is a scheme of the item designing component life cycle. There is also a scheme how to develop and confirm the quality of the item designing component documentation using the mathematical modelling. There is a description of the self-organization principles for the cyber and physical technological equipment in the Industry 4.0 «smart factory» company during the manufacturing process.

The preparation and evaluation of sustained release suppositories containing ketoprofen and Eudragit RL 100 by using factorial design.

PubMed

Ozgüney, I; Ozcan, I; Ertan, G; Güneri, T

2007-01-01

The preparation of ketoprofen (KP) sustained release (SR) suppositories was designed according to the 3(2) x 2(1) factorial design as three different KP:Eudragit RL 100 ratios (1:0.5, 1:1, 1:2), three particle sizes of prepared granules (250-500, 500-710, and 710-1000 microm) and two different PEG 400:PEG 6000 ratios (40:60, 50:50). The conventional KP suppositories were also prepared by using Witepsol H 15, Massa Estarinum B, Cremao and the mixture of PEG 400:PEG 6000. The dissolution studies of suppositories prepared were carried out according to the USP XXIII basket method in the phosphate buffer (pH = 7.2) at 50 rpm, and it was shown that the dissolution time was sustained up to 8 hours. According to the results of the factorial design, the most important independent variable on t50 and t80 was drug:polymer ratios. The log of partition coefficient of KP was determined as 1.46, showing the high affinity to the oily phase. n exponent and kinetic studies were conducted to explain diffusion mechanism, and it is understood that if the inert KP:Eudragit RL 100 ratio is increased in the particles, the Fickian difusion dominates and the best kinetic turns to Higuchi from the Hixson-Crowell. There is neither crystalline form of KP nor degradation product in the suppositories detected with the differential scanning calorimetry (DSC) studies. In addition to these studies, antiinflammatory activity of SR suppositories also determined that it was significantly extended according to the conventional suppositories.

Development of Understory Vegetation in Pine and Pine-Hardwood Shelterwood Stands in the Ouachita Mountains-the First 3 Years

Treesearch

Michael G. Shelton

1997-01-01

The shelterwood reproduction cutting method using two overstory compositions (a pine basal area of 30 ft* per acre with and without 15 ft’ per acre of hardwoods) and two methods of submerchantable hardwood control (chain-saw felling with and without stump-applied herbicide) was tested in a 2x2 factorial, split-plot design with four randomized complete blocks....

Sanitary Norms of the Design of Industrial Enterprises. SN 245-71.

DTIC Science & Technology

1979-07-09

Plants of feed 4ntibiotics. 3. Fish trades. 4. Cattle bases to 1000 heads of given cattle. 5. Shops for production of ferments with surface method of...sirloin with scrap processing shops, fisheries. 9. Shops for production of ferments with deep method of cultivation. 10. Beet sugar plants without pulp...zone by size/dimension 50 a. 1. Confectionery factories. 2. Production of table vinegar . 3. Enterprises tobacco-lov-grade tobacco (tobacco

Relationships among Reading Performance, Locus of Control and Achievement for Marginal Admission Students.

ERIC Educational Resources Information Center

Pepper, Roger S.; Drexler, John A., Jr.

The first phase of the study was a 2 x 2 factorial design, with locus of control and instructional method (lecture and demonstration) as independent variables and honor point average (HPA) as the dependent variable. The second phase used correlational techniques to test the extent to which reading performance and traditional predictors of…

Dietary Protein and Calcium Interact to Influence Calcium Retention: A Controlled Feeding Study

USDA-ARS?s Scientific Manuscript database

Objective: To test the effect of dietary protein on Ca (Ca) retention at low and high Ca intakes. Methods: In a randomized, controlled feeding study with a 2x2 factorial crossover design, healthy post-menopausal women (n=27), consumed either ~675 or ~1510 mg Ca/d, with both low and high protein (pro...

Development of RP UPLC-TOF/MS, stability indicating method for omeprazole and its related substances by applying two level factorial design; and identification and synthesis of non-pharmacopoeial impurities.

PubMed

Jadhav, Sushant Bhimrao; Kumar, C Kiran; Bandichhor, Rakeshwar; Bhosale, P N

2016-01-25

A new UPLC-TOF/MS compatible, reverse phase-stability indicating method was developed for determination of Omeprazole (OMP) and its related substances in pharmaceutical dosage forms by implementing Design of Experiment (DoE) i.e. two level full factorial Design (2(3)+3 center points=11 experiments) to understand the Critical Method Parameters (CMP) and its relation with Critical Method Attribute (CMA); to ensure robustness of the method. The separation of eleven specified impurities including conversion product of OMP related compound F (13) and G (14) i.e. Impurity-I (1), OMP related compound-I (11) and OMP 4-chloro analog (12) was achieved in a single method on Acquity BEH shield RP18 100 × 2.1 mm, 1.7 μm column, with inlet filter (0.2 μm) using gradient elution and detector wavelength at 305 nm and validated in accordance with ICH guidelines and found to be accurate, precise, reproducible, robust and specific. The drug was found to degrade extensively in heat, humidity and acidic conditions and forms unknown degradation products during stability studies. The same method was used for LC-MS analysis to identify m/z and fragmentation of maximum unknown impurities (Non-Pharmacopoeial) i.e. Impurity-I (1), Impurity-III (3), Impurity-V (5) and Impurity-VIII (9) formed during stability studies. Based on the results, degradation pathway for the drug has been proposed and synthesis of identified impurities i.e. impurities (Impurity-I (1), Impurity-III (3), Impurity-V (5) and Impurity-VIII (9)) are discussed in detail to ensure in-depth understanding of OMP and its related impurities and optimum performance during lifetime of the product. Copyright © 2015. Published by Elsevier B.V.

Experimental Investigation of the Application of Microramp Flow Control to an Oblique Shock Interaction

NASA Technical Reports Server (NTRS)

Hirt, Stefanie M.; Anderson, Bernhard H.

2009-01-01

The effectiveness of microramp flow control devices in controlling an oblique shock interaction was tested in the 15- by 15-Centimeter Supersonic Wind Tunnel at NASA Glenn Research Center. Fifteen microramp geometries were tested varying the height, chord length, and spacing between ramps. Measurements of the boundary layer properties downstream of the shock reflection were analyzed using design of experiments methods. Results from main effects, D-optimal, full factorial, and central composite designs were compared. The designs provided consistent results for a single variable optimization.

Sample size requirements for separating out the effects of combination treatments: randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis.

PubMed

Wolbers, Marcel; Heemskerk, Dorothee; Chau, Tran Thi Hong; Yen, Nguyen Thi Bich; Caws, Maxine; Farrar, Jeremy; Day, Jeremy

2011-02-02

In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 x 2 factorial design. We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 x 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Current Controlled Trials ISRCTN61649292.

Strategic Investment Plan Fiscal Year 1993.

DTIC Science & Technology

1993-09-01

Groundwater ........................ 283 Heavy Metals in Soils, Sludges, Sediments and Water .................... 321 Energetics in Soils and Groundwater...technologies and tools to achieve a design for reconfiguring existing PEP production facilities into agile factories which will reduce total life cycle wastes...facilities. When use of existing facilities is not practical, a special demonstration testbed may be built. The factory design will then be developed

Control of workers’ exposure to xylene in a pesticide production factory

PubMed Central

Mohammadyan, M; Baharfar, Y

2015-01-01

Background: Acute and chronic exposure to xylene can result in a range of negative health effects. However, xylene is widely used and emitted in the air of workplaces. Objectives: To evaluate xylene vapor concentrations to guide the design and evaluation of a local exhaust ventilation (LEV) system to reduce exposure in a pesticide production factory. Method: A real time volatile organic compound (VOC) monitor was used to determine the workers’ time-weighted average (TWA) exposure. A LEV system was designed, and then, workers’ exposure to xylene vapor was evaluated. Results: We found that worker’s exposure to xylene (4.7±5.5 ppm) was lower than the standards recommended by the American Conference of Governmental Industrial Hygienists (ACGIH) and the Occupational safety and health administration (OSHA). Despite the low TWA exposures, the short-term exposures for some workers were higher than STEL levels. Three canopy hoods were designed and installed with capture velocities of 0.508 m second−1 and duct velocity of 10.16 m second−1. Conclusion: We found that an exhaust ventilation system had a significantly reduced occupational exposure to xylene vapor. PMID:25487643

A factory concept for processing and manufacturing with lunar material

NASA Technical Reports Server (NTRS)

Driggers, G. W.

1977-01-01

A conceptual design for an orbital factory sized to process 1.5 million metric tons per year of raw lunar fines into 0.3 million metric tons of manufacturing materials is presented. A conservative approach involving application of present earth-based technology leads to a design devoid of new inventions. Earth based counterparts to the factory machinery were used to generate subsystem masses and lumped parameters for volume and mass estimates. The results are considered to be conservative since technologies more advanced than those assumed are presently available in many areas. Some attributes of potential space processing technologies applied to material refinement and component manufacture are discussed.

Mars surface based factory. Phase 2, task 1C: Computer control of a water treatment system to support a space colony on Mars

NASA Technical Reports Server (NTRS)

Fuller, John; Ali, Warsame; Willis, Danette

1989-01-01

In a continued effort to design a surface based factory on Mars for the production of oxygen and water, a preliminary study was made of the surface and atmospheric composition on Mars and determined the mass densities of the various gases in the Martian atmosphere. Based on the initial studies, oxygen and water were determined to be the two products that could be produced economically under the Martian conditions. Studies were also made on present production techniques to obtain water and oxygen. Analyses were made to evaluate the current methods of production that were adaptable to the Martian conditions. Even though the initial effort was the production of oxygen and water, it was found necessary to produce some diluted gases that can be mixed with the oxygen produced to constitute 'breathable' air. The conceptual design of a breathable air manufacturing system, a means of drilling for underground water, and storage of water for future use were completed. The design objective was the conceptual design of an integrated system for the supply of quality water for biological consumption, farming, residential and industrial use.

Development of a factory/refinery method to measure total, soluble, and insoluble starch in sugar products

USDA-ARS?s Scientific Manuscript database

An easy, rapid, and inexpensive method was developed to measure total, soluble, and insoluble starch in products at the factory and refinery, using microwave-assisted neutralization chemistry. The method was optimized using the previously developed USDA Starch Research method as a reference. Optimal...

A Mindful Approach to Teaching Emotional Intelligence to Undergraduate Students Online and in Person

ERIC Educational Resources Information Center

Cotler, Jami L.; DiTursi, Dan; Goldstein, Ira; Yates, Jeff; DelBelso, Deb

2017-01-01

In this paper we examine whether emotional intelligence (EI) can be taught online and, if so, what key variables influence the successful implementation of this online learning model. Using a 3 x 2 factorial quasi-experimental design, this mixed-methods study found that a team-based learning environment using a blended teaching approach, supported…

Cluster Randomized-Controlled Trial of Interventions to Improve Health for Adults with Intellectual Disability Who Live in Private Dwellings

ERIC Educational Resources Information Center

Lennox, Nicholas; Bain, Chris; Rey-Conde, Therese; Taylor, Miriam; Boyle, Frances M.; Purdie, David M.; Ware, Robert S.

2010-01-01

Background: People with intellectual disability who live in the community often have poor health and healthcare, partly as a consequence of poor communication, recall difficulties and incomplete patient health information. Materials and Methods: A cluster randomized-controlled trial with 2 x 2 factorial design was conducted with adults with…

Comparison between Thermal Desorption Tubes and Stainless Steel Canisters Used for Measuring Volatile Organic Compounds in Petrochemical Factories

PubMed Central

Chang, Cheng-Ping; Lin, Tser-Cheng; Lin, Yu-Wen; Hua, Yi-Chun; Chu, Wei-Ming; Lin, Tzu-Yu; Lin, Yi-Wen; Wu, Jyun-De

2016-01-01

Objective: The purpose of this study was to compare thermal desorption tubes and stainless steel canisters for measuring volatile organic compounds (VOCs) emitted from petrochemical factories. Methods: Twelve petrochemical factories in the Mailiao Industrial Complex were recruited for conducting the measurements of VOCs. Thermal desorption tubes and 6-l specially prepared stainless steel canisters were used to simultaneously perform active sampling of environmental air samples. The sampling time of the environmental air samples was set up on 6h close to a full work shift of the workers. A total of 94 pairwise air samples were collected by using the thermal adsorption tubes and stainless steel canisters in these 12 factories in the petrochemical industrial complex. To maximize the number of comparative data points, all the measurements from all the factories in different sampling times were lumped together to perform a linear regression analysis for each selected VOC. Pearson product–moment correlation coefficient was used to examine the correlation between the pairwise measurements of these two sampling methods. A paired t-test was also performed to examine whether the difference in the concentrations of each selected VOC measured by the two methods was statistically significant. Results: The correlation coefficients of seven compounds, including acetone, n-hexane, benzene, toluene, 1,2-dichloroethane, 1,3-butadiene, and styrene were >0.80 indicating the two sampling methods for these VOCs’ measurements had high consistency. The paired t-tests for the measurements of n-hexane, benzene, m/p-xylene, o-xylene, 1,2-dichloroethane, and 1,3-butadiene showed statistically significant difference (P-value < 0.05). This indicated that the two sampling methods had various degrees of systematic errors. Looking at the results of six chemicals and these systematic errors probably resulted from the differences of the detection limits in the two sampling methods for these VOCs. Conclusions: The comparison between the concentrations of each of the 10 selected VOCs measured by the two sampling methods indicted that the thermal desorption tubes provided high accuracy and precision measurements for acetone, benzene, and 1,3-butadiene. The accuracy and precision of using the thermal desorption tubes for measuring the VOCs can be improved due to new developments in sorbent materials, multi-sorbent designs, and thermal desorption instrumentation. More applications of thermal desorption tubes for measuring occupational and environmental hazardous agents can be anticipated. PMID:26585828

Multivariate factorial analysis to design a robust batch leaching test to assess the volcanic ash geochemical hazard.

PubMed

Ruggieri, Flavia; Gil, Raúl A; Fernandez-Turiel, Jose-Luis; Saavedra, Julio; Gimeno, Domingo; Lobo, Agustin; Martinez, Luis D; Rodriguez-Gonzalez, Alejandro

2012-04-30

A method to obtain robust information on short term leaching behaviour of volcanic ashes has been developed independently on the sample age. A mixed factorial design (MFD) was employed as a multivariate strategy for the evaluation of the effects of selected control factors and their interactions (amount of sample (A), contact time (B), and liquid to solid ratio or L/S (C)) on the leaching process of selected metals (Na, K, Mg, Ca, Si, Al, V, Mn, Fe, and Co) and anions (Cl(-) and SO(4)(2-)). Box plots of the data acquired were used to evaluate the reproducibility achieved at different experimental conditions. Both the amount of sample (A) and leaching time (B) had a significant effect on the element stripping whereas the L/S ratio influenced only few elements. The lowest dispersion values have been observed when 1.0 g was leached with an L/S ratio equal to 10, shaking during 4 h. The entire method is completed within few hours, and it is simple, feasible and reliable in laboratory conditions. Copyright © 2012 Elsevier B.V. All rights reserved.

Taguchi method of experimental design in materials education

NASA Technical Reports Server (NTRS)

Weiser, Martin W.

1993-01-01

Some of the advantages and disadvantages of the Taguchi Method of experimental design as applied to Materials Science will be discussed. This is a fractional factorial method that employs the minimum number of experimental trials for the information obtained. The analysis is also very simple to use and teach, which is quite advantageous in the classroom. In addition, the Taguchi loss function can be easily incorporated to emphasize that improvements in reproducibility are often at least as important as optimization of the response. The disadvantages of the Taguchi Method include the fact that factor interactions are normally not accounted for, there are zero degrees of freedom if all of the possible factors are used, and randomization is normally not used to prevent environmental biasing. In spite of these disadvantages it is felt that the Taguchi Method is extremely useful for both teaching experimental design and as a research tool, as will be shown with a number of brief examples.

Minifactory: a precision assembly system adaptable to the product life cycle

NASA Astrophysics Data System (ADS)

Muir, Patrick F.; Rizzi, Alfred A.; Gowdy, Jay W.

1997-12-01

Automated product assembly systems are traditionally designed with the intent that they will be operated with few significant changes for as long as the product is being manufactured. This approach to factory design and programming has may undesirable qualities which have motivated the development of more 'flexible' systems. In an effort to improve agility, different types of flexibility have been integrated into factory designs. Specifically, automated assembly systems have been endowed with the ability to assemble differing products by means of computer-controlled robots, and to accommodate variations in parts locations and dimensions by means of sensing. The product life cycle (PLC) is a standard four-stage model of the performance of a product from the time that it is first introduced in the marketplace until the time that it is discontinued. Manufacturers can improve their return on investment by adapting the production process to the PLC. We are developing two concepts to enable manufacturers to more readily achieve this goal: the agile assembly architecture (AAA), an abstract framework for distributed modular automation; and minifactory, our physical instantation of this architecture for the assembly of precision electro-mechanical devices. By examining the requirements which each PLC stage places upon the production system, we identify characteristics of factory design and programming which are appropriate for that stage. As the product transitions from one stage to the next, the factory design and programing should also transition from one embodiment to the next in order to achieve the best return on investment. Modularity of the factory components, highly flexible product transport mechanisms, and a high level of distributed intelligence are key characteristics of minifactory that enable this adaptation.

Neutrino factory

DOE PAGES

Bogomilov, M.; Matev, R.; Tsenov, R.; ...

2014-12-08

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable ofmore » making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.« less

Multi-registration of software library resources

DOEpatents

Archer, Charles J [Rochester, MN; Blocksome, Michael A [Rochester, MN; Ratterman, Joseph D [Rochester, MN; Smith, Brian E [Rochester, MN

2011-04-05

Data communications, including issuing, by an application program to a high level data communications library, a request for initialization of a data communications service; issuing to a low level data communications library a request for registration of data communications functions; registering the data communications functions, including instantiating a factory object for each of the one or more data communications functions; issuing by the application program an instruction to execute a designated data communications function; issuing, to the low level data communications library, an instruction to execute the designated data communications function, including passing to the low level data communications library a call parameter that identifies a factory object; creating with the identified factory object the data communications object that implements the data communications function according to the protocol; and executing by the low level data communications library the designated data communications function.

Front End for a neutrino factory or muon collider

NASA Astrophysics Data System (ADS)

Neuffer, D.; Snopok, P.; Alexahin, Y.

2017-11-01

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ 's produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a varphi -δ E rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an "HFOFO Snake" configuration that cools both μ+ and μ- transversely and longitudinally. The status of the design is presented and variations are discussed.

B factory plans at Cornell

NASA Astrophysics Data System (ADS)

Berkelman, Karl

1989-12-01

Recent upgrade project at the Cornell Electron Storage Ring is discussed. Modification was made to make B mesons factory design possible. The CLEO detector has been rebuilt with a new superconducting magnet and a high resolution electromagnetic calorimeter made of cesium iodide scintillators.(AIP)

Engineering Translation in Mammalian Cell Factories to Increase Protein Yield: The Unexpected Use of Long Non-Coding SINEUP RNAs.

PubMed

Zucchelli, Silvia; Patrucco, Laura; Persichetti, Francesca; Gustincich, Stefano; Cotella, Diego

2016-01-01

Mammalian cells are an indispensable tool for the production of recombinant proteins in contexts where function depends on post-translational modifications. Among them, Chinese Hamster Ovary (CHO) cells are the primary factories for the production of therapeutic proteins, including monoclonal antibodies (MAbs). To improve expression and stability, several methodologies have been adopted, including methods based on media formulation, selective pressure and cell- or vector engineering. This review presents current approaches aimed at improving mammalian cell factories that are based on the enhancement of translation. Among well-established techniques (codon optimization and improvement of mRNA secondary structure), we describe SINEUPs, a family of antisense long non-coding RNAs that are able to increase translation of partially overlapping protein-coding mRNAs. By exploiting their modular structure, SINEUP molecules can be designed to target virtually any mRNA of interest, and thus to increase the production of secreted proteins. Thus, synthetic SINEUPs represent a new versatile tool to improve the production of secreted proteins in biomanufacturing processes.

Determination of the clean-up efficiency of the solid-phase extraction of rosemary extracts: Application of full-factorial design in hyphenation with Gaussian peak fit function.

PubMed

Meischl, Florian; Kirchler, Christian Günter; Jäger, Michael Andreas; Huck, Christian Wolfgang; Rainer, Matthias

2018-02-01

We present a novel method for the quantitative determination of the clean-up efficiency to provide a calculated parameter for peak purity through iterative fitting in conjunction with design of experiments. Rosemary extracts were used and analyzed before and after solid-phase extraction using a self-fabricated mixed-mode sorbent based on poly(N-vinylimidazole/ethylene glycol dimethacrylate). Optimization was performed by variation of washing steps using a full three-level factorial design and response surface methodology. Separation efficiency of rosmarinic acid from interfering compounds was calculated using an iterative fit of Gaussian-like signals and quantifications were performed by the separate integration of the two interfering peak areas. Results and recoveries were analyzed using Design-Expert® software and revealed significant differences between the washing steps. Optimized parameters were considered and used for all further experiments. Furthermore, the solid-phase extraction procedure was tested and compared with commercial available sorbents. In contrast to generic protocols of the manufacturers, the optimized procedure showed excellent recoveries and clean-up rates for the polymer with ion exchange properties. Finally, rosemary extracts from different manufacturing areas and application types were studied to verify the developed method for its applicability. The cleaned-up extracts were analyzed by liquid chromatography with tandem mass spectrometry for detailed compound evaluation to exclude any interference from coeluting molecules. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Comparison between Thermal Desorption Tubes and Stainless Steel Canisters Used for Measuring Volatile Organic Compounds in Petrochemical Factories.

PubMed

Chang, Cheng-Ping; Lin, Tser-Cheng; Lin, Yu-Wen; Hua, Yi-Chun; Chu, Wei-Ming; Lin, Tzu-Yu; Lin, Yi-Wen; Wu, Jyun-De

2016-04-01

The purpose of this study was to compare thermal desorption tubes and stainless steel canisters for measuring volatile organic compounds (VOCs) emitted from petrochemical factories. Twelve petrochemical factories in the Mailiao Industrial Complex were recruited for conducting the measurements of VOCs. Thermal desorption tubes and 6-l specially prepared stainless steel canisters were used to simultaneously perform active sampling of environmental air samples. The sampling time of the environmental air samples was set up on 6 h close to a full work shift of the workers. A total of 94 pairwise air samples were collected by using the thermal adsorption tubes and stainless steel canisters in these 12 factories in the petrochemical industrial complex. To maximize the number of comparative data points, all the measurements from all the factories in different sampling times were lumped together to perform a linear regression analysis for each selected VOC. Pearson product-moment correlation coefficient was used to examine the correlation between the pairwise measurements of these two sampling methods. A paired t-test was also performed to examine whether the difference in the concentrations of each selected VOC measured by the two methods was statistically significant. The correlation coefficients of seven compounds, including acetone, n-hexane, benzene, toluene, 1,2-dichloroethane, 1,3-butadiene, and styrene were >0.80 indicating the two sampling methods for these VOCs' measurements had high consistency. The paired t-tests for the measurements of n-hexane, benzene, m/p-xylene, o-xylene, 1,2-dichloroethane, and 1,3-butadiene showed statistically significant difference (P-value < 0.05). This indicated that the two sampling methods had various degrees of systematic errors. Looking at the results of six chemicals and these systematic errors probably resulted from the differences of the detection limits in the two sampling methods for these VOCs. The comparison between the concentrations of each of the 10 selected VOCs measured by the two sampling methods indicted that the thermal desorption tubes provided high accuracy and precision measurements for acetone, benzene, and 1,3-butadiene. The accuracy and precision of using the thermal desorption tubes for measuring the VOCs can be improved due to new developments in sorbent materials, multi-sorbent designs, and thermal desorption instrumentation. More applications of thermal desorption tubes for measuring occupational and environmental hazardous agents can be anticipated. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Evaluation of a method estimating real-time individual lysine requirements in two lines of growing-finishing pigs.

PubMed

Cloutier, L; Pomar, C; Létourneau Montminy, M P; Bernier, J F; Pomar, J

2015-04-01

The implementation of precision feeding in growing-finishing facilities requires accurate estimates of the animals' nutrient requirements. The objectives of the current study was to validate a method for estimating the real-time individual standardized ileal digestible (SID) lysine (Lys) requirements of growing-finishing pigs and the ability of this method to estimate the Lys requirements of pigs with different feed intake and growth patterns. Seventy-five pigs from a terminal cross and 72 pigs from a maternal cross were used in two 28-day experimental phases beginning at 25.8 (±2.5) and 73.3 (±5.2) kg BW, respectively. Treatments were randomly assigned to pigs within each experimental phase according to a 2×4 factorial design in which the two genetic lines and four dietary SID Lys levels (70%, 85%, 100% and 115% of the requirements estimated by the factorial method developed for precision feeding) were the main factors. Individual pigs' Lys requirements were estimated daily using a factorial approach based on their feed intake, BW and weight gain patterns. From 25 to 50 kg BW, this method slightly underestimated the pigs' SID Lys requirements, given that maximum protein deposition and weight gain were achieved at 115% of SID Lys requirements. However, the best gain-to-feed ratio (G : F) was obtained at a level of 85% or more of the estimated Lys requirement. From 70 to 100 kg, the method adequately estimated the pigs' individual requirements, given that maximum performance was achieved at 100% of Lys requirements. Terminal line pigs ate more (P=0.04) during the first experimental phase and tended to eat more (P=0.10) during the second phase than the maternal line pigs but both genetic lines had similar ADG and protein deposition rates during the two phases. The factorial method used in this study to estimate individual daily SID Lys requirements was able to accommodate the small genetic differences in feed intake, and it was concluded that this method can be used in precision feeding systems without adjustments. However, the method's ability to accommodate large genetic differences in feed intake and protein deposition patterns needs to be studied further.

Study protocol for a cluster randomised controlled factorial design trial to assess the effectiveness and feasibility of reactive focal mass drug administration and vector control to reduce malaria transmission in the low endemic setting of Namibia

PubMed Central

Medzihradsky, Oliver F; Kleinschmidt, Immo; Mumbengegwi, Davis; Roberts, Kathryn W; McCreesh, Patrick; Dufour, Mi-Suk Kang; Uusiku, Petrina; Katokele, Stark; Bennett, Adam; Smith, Jennifer; Sturrock, Hugh; Prach, Lisa M; Ntuku, Henry; Tambo, Munyaradzi; Didier, Bradley; Greenhouse, Bryan; Gani, Zaahira; Aerts, Ann; Gosling, Roly; Hsiang, Michelle S

2018-01-01

Introduction To interrupt malaria transmission, strategies must target the parasite reservoir in both humans and mosquitos. Testing of community members linked to an index case, termed reactive case detection (RACD), is commonly implemented in low transmission areas, though its impact may be limited by the sensitivity of current diagnostics. Indoor residual spraying (IRS) before malaria season is a cornerstone of vector control efforts. Despite their implementation in Namibia, a country approaching elimination, these methods have been met with recent plateaus in transmission reduction. This study evaluates the effectiveness and feasibility of two new targeted strategies, reactive focal mass drug administration (rfMDA) and reactive focal vector control (RAVC) in Namibia. Methods and analysis This is an open-label cluster randomised controlled trial with 2×2 factorial design. The interventions include: rfMDA (presumptive treatment with artemether-lumefantrine (AL)) versus RACD (rapid diagnostic testing and treatment using AL) and RAVC (IRS with Acellic 300CS) versus no RAVC. Factorial design also enables comparison of the combined rfMDA+RAVC intervention to RACD. Participants living in 56 enumeration areas will be randomised to one of four arms: rfMDA, rfMDA+RAVC, RACD or RACD+RAVC. These interventions, triggered by index cases detected at health facilities, will be targeted to individuals residing within 500 m of an index. The primary outcome is cumulative incidence of locally acquired malaria detected at health facilities over 1 year. Secondary outcomes include seroprevalence, infection prevalence, intervention coverage, safety, acceptability, adherence, cost and cost-effectiveness. Ethics and dissemination Findings will be reported on clinicaltrials.gov, in peer-reviewed publications and through stakeholder meetings with MoHSS and community leaders in Namibia. Trial registration number NCT02610400; Pre-results. PMID:29374672

Formulation and evaluation of floating tablet of H2-receptor antagonist.

PubMed

Kesarla, Rajesh S; Vora, Pratik Ashwinbhai; Sridhar, B K; Patel, Gunvant; Omri, Abdelwahab

2015-01-01

Conventional sustained dosage form of ranitidine hydrochloride (HCl) does not prevent frequent administration due to its degradation in colonic media and limited absorption in the upper part of GIT. Ranitidine HCl floating tablet was formulated with sublimation method to overcome the stated problem. Compatibility study for screening potential excipients was carried out using Fourier transform infrared spectroscopy (FT-IR) and differential scanning chromatography (DSC). Selected excipients were further evaluated for optimizing the formulation. Preliminary screening of binder, polymer and sublimating material was based on hardness and drug release, drug release with release kinetics and floating lag time with total floatation time, respectively. Selected excipients were subjected to 3(2) factorial design with polymer and sublimating material as independent factors. Matrix tablets were obtained by using 16/32" flat-faced beveled edges punches followed by sublimation. FT-IR and DSC indicated no significant incompatibility with selected excipients. Klucel-LF, POLYOX WSR N 60 K and l-menthol were selected as binder, polymer and sublimating material, respectively, for factorial design batches after preliminary screening. From the factorial design batches, optimum concentration to release the drug within 12 h was found to be 420 mg of POLYOX and 40 mg of l-menthol. Stability studies indicated the formulation as stable. Ranitidine HCl matrix floating tablets were formulated to release 90% of drug in stomach within 12 h. Hence, release of the drug could be sustained within narrow absorption site. Moreover, the dosage form was found to be floating within a fraction of second independent of the pH of media ensuring a robust formulation.

A rapid biochemical test to assess postharvest deterioration of sugarcane and milled juice

USDA-ARS?s Scientific Manuscript database

The delivery of consignments of deteriorated sugarcane to factories can detrimentally affect multiple process units, and even lead to a factory shut-down. An enzymatic factory method was used to measure mannitol, a major degradation product of sugarcane Leuconostoc deterioration in the U.S., in pre...

Factorial versus Typological Models: A Comparison of Methods for Personality Data

ERIC Educational Resources Information Center

von Davier, Matthias; Naemi, Bobby; Roberts, Richard D.

2012-01-01

This article describes an exploration of the distinction between typological and factorial latent variables in the domain of personality theory. Traditionally, many personality variables have been considered to be factorial in nature, even though there are examples of typological constructs dating back to Hippocrates. Recently, some…

The Idea Factory: An Interactive Intergroup Exercise

ERIC Educational Resources Information Center

Rosh, Lisa; Leach, Evan

2011-01-01

This article outlines the Idea Factory exercise, an interactive exercise designed to help participants examine group, individual, and organizational factors that affect intergroup conflict. Specific emphasis is placed on exploring the relationship between intra- and intergroup dynamics and identifying managerial practices that foster effective…

Replicating systems concepts: Self-replicating lunar factory and demonstration

NASA Technical Reports Server (NTRS)

1982-01-01

Automation of lunar mining and manufacturing facility maintenance and repair is addressed. Designing the factory as an automated, multiproduct, remotely controlled, reprogrammable Lunar Manufacturing Facility capable of constructing duplicates of itself which would themselves be capable of further replication is proposed.

Allocating Sample Sizes to Reduce Budget for Fixed-Effect 2×2 Heterogeneous Analysis of Variance

ERIC Educational Resources Information Center

Luh, Wei-Ming; Guo, Jiin-Huarng

2016-01-01

This article discusses the sample size requirements for the interaction, row, and column effects, respectively, by forming a linear contrast for a 2×2 factorial design for fixed-effects heterogeneous analysis of variance. The proposed method uses the Welch t test and its corresponding degrees of freedom to calculate the final sample size in a…

Effect of Formative and Ability Test Results on Early Learning of Students

ERIC Educational Resources Information Center

Kadir, Abdul; Ardi, Muhammad; Nurhayati, B.; Dirawan, Gufran Darma

2016-01-01

The objective of this study was to examine the relationship of formative tests to early learning ability of students in the science learning style. This research used an experimental method with a 2 x 2 factorial design. The participants comprised all the students in class VII of the Islamic Junior High School State of Kolaka, a total of 343…

Using Propensity Score Methods to Approximate Factorial Experimental Designs to Analyze the Relationship between Two Variables and an Outcome

ERIC Educational Resources Information Center

Dong, Nianbo

2015-01-01

Researchers have become increasingly interested in programs' main and interaction effects of two variables (A and B, e.g., two treatment variables or one treatment variable and one moderator) on outcomes. A challenge for estimating main and interaction effects is to eliminate selection bias across A-by-B groups. I introduce Rubin's causal model to…

Manufacturing data analytics using a virtual factory representation.

PubMed

Jain, Sanjay; Shao, Guodong; Shin, Seung-Jun

2017-01-01

Large manufacturers have been using simulation to support decision-making for design and production. However, with the advancement of technologies and the emergence of big data, simulation can be utilised to perform and support data analytics for associated performance gains. This requires not only significant model development expertise, but also huge data collection and analysis efforts. This paper presents an approach within the frameworks of Design Science Research Methodology and prototyping to address the challenge of increasing the use of modelling, simulation and data analytics in manufacturing via reduction of the development effort. The use of manufacturing simulation models is presented as data analytics applications themselves and for supporting other data analytics applications by serving as data generators and as a tool for validation. The virtual factory concept is presented as the vehicle for manufacturing modelling and simulation. Virtual factory goes beyond traditional simulation models of factories to include multi-resolution modelling capabilities and thus allowing analysis at varying levels of detail. A path is proposed for implementation of the virtual factory concept that builds on developments in technologies and standards. A virtual machine prototype is provided as a demonstration of the use of a virtual representation for manufacturing data analytics.

The Positive Emotions after Acute Coronary Events behavioral health intervention: Design, rationale, and preliminary feasibility of a factorial design study.

PubMed

Huffman, Jeffery C; Albanese, Ariana M; Campbell, Kirsti A; Celano, Christopher M; Millstein, Rachel A; Mastromauro, Carol A; Healy, Brian C; Chung, Wei-Jean; Januzzi, James L; Collins, Linda M; Park, Elyse R

2017-04-01

Positive psychological constructs, such as optimism, are associated with greater participation in cardiac health behaviors and improved cardiac outcomes. Positive psychology interventions, which target psychological well-being, may represent a promising approach to improving health behaviors in high-risk cardiac patients. However, no study has assessed whether a positive psychology intervention can promote physical activity following an acute coronary syndrome. In this article we will describe the methods of a novel factorial design study to aid the development of a positive psychology-based intervention for acute coronary syndrome patients and aim to provide preliminary feasibility data on study implementation. The Positive Emotions after Acute Coronary Events III study is an optimization study (planned N = 128), subsumed within a larger multiphase optimization strategy iterative treatment development project. The goal of Positive Emotions after Acute Coronary Events III is to identify the ideal components of a positive psychology-based intervention to improve post-acute coronary syndrome physical activity. Using a 2 × 2 × 2 factorial design, Positive Emotions after Acute Coronary Events III aims to: (1) evaluate the relative merits of using positive psychology exercises alone or combined with motivational interviewing, (2) assess whether weekly or daily positive psychology exercise completion is optimal, and (3) determine the utility of booster sessions. The study's primary outcome measure is moderate-to-vigorous physical activity at 16 weeks, measured via accelerometer. Secondary outcome measures include psychological, functional, and adherence-related behavioral outcomes, along with metrics of feasibility and acceptability. For the primary study outcome, we will use a mixed-effects model with a random intercept (to account for repeated measures) to assess the main effects of each component (inclusion of motivational interviewing in the exercises, duration of the intervention, and inclusion of booster sessions) from a full factorial model controlling for baseline activity. Similar analyses will be performed on self-report measures and objectively-measured medication adherence over 16 weeks. We hypothesize that the combined positive psychology and motivational interviewing intervention, weekly exercises, and booster sessions will be associated with superior physical activity. Thus far, 78 participants have enrolled, with 72% of all possible exercises fully completed by participants. The Positive Emotions after Acute Coronary Events III study will help to determine the optimal content, intensity, and duration of a positive psychology intervention in post-acute coronary syndrome patients prior to testing in a randomized trial. This study is novel in its use of a factorial design within the multiphase optimization strategy framework to optimize a behavioral intervention and the use of a positive psychology intervention to promote physical activity in high-risk cardiac patients.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai

Similar to a super B-factory, a circular Higgs factory (CHF) will require strong focusing systems near the interaction points and a low-emittance lattice in the arcs to achieve a factory luminosity. At electron beam energy of 125 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at the 2% level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of a CHF. In this paper, an example will be provided to illustrate the beam dynamics in a CHF,more » emphasizing the chromatic optics. Basic optical modules and advanced analysis will be presented. Most importantly, we will show that 2% momentum aperture is achievable.« less

Front End for a neutrino factory or muon collider

DOE PAGES

Neuffer, David; Snopok, Pavel; Alexahin, Yuri

2017-11-30

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a Φ-δE rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both μ + and μ - transversely andmore » longitudinally. Finally, the status of the design is presented and variations are discussed.« less

The Cognitive and Perceptual Laws of the Inclined Plane.

PubMed

Masin, Sergio Cesare

2016-09-01

The study explored whether laypersons correctly tacitly know Galileo's law of the inclined plane and what the basis of such knowledge could be. Participants predicted the time a ball would take to roll down a slope with factorial combination of ball travel distance and slope angle. The resulting pattern of factorial curves relating the square of predicted time to travel distance for each slope angle was identical to that implied by Galileo's law, indicating a correct cognitive representation of this law. Intuitive physics research suggests that this cognitive representation may result from memories of past perceptions of objects rolling down a slope. Such a basis and the correct cognitive representation of Galileo's law led to the hypothesis that Galileo's law is also perceptually represented correctly. To test this hypothesis, participants were asked to judge the perceived travel time of a ball actually rolling down a slope, with perceived travel distance and perceived slope angle varied in a factorial design. The obtained pattern of factorial curves was equal to that implied by Galileo's law, indicating that the functional relationships defined in this law were perceptually represented correctly. The results foster the idea that laypersons may tacitly know both linear and nonlinear multiplicative physical laws of the everyday world. As a practical implication, the awareness of this conclusion may help develop more effective methods for teaching physics and for improving human performance in the physical environment.

Microwave-assisted of dispersive liquid-liquid microextraction and spectrophotometric determination of uranium after optimization based on Box-Behnken design and chemometrics methods.

PubMed

Niazi, Ali; Khorshidi, Neda; Ghaemmaghami, Pegah

2015-01-25

In this study an analytical procedure based on microwave-assisted dispersive liquid-liquid microextraction (MA-DLLME) and spectrophotometric coupled with chemometrics methods is proposed to determine uranium. In the proposed method, 4-(2-pyridylazo) resorcinol (PAR) is used as a chelating agent, and chloroform and ethanol are selected as extraction and dispersive solvent. The optimization strategy is carried out by using two level full factorial designs. Results of the two level full factorial design (2(4)) based on an analysis of variance demonstrated that the pH, concentration of PAR, amount of dispersive and extraction solvents are statistically significant. Optimal condition for three variables: pH, concentration of PAR, amount of dispersive and extraction solvents are obtained by using Box-Behnken design. Under the optimum conditions, the calibration graphs are linear in the range of 20.0-350.0 ng mL(-1) with detection limit of 6.7 ng mL(-1) (3δB/slope) and the enrichment factor of this method for uranium reached at 135. The relative standard deviation (R.S.D.) is 1.64% (n=7, c=50 ng mL(-1)). The partial least squares (PLS) modeling was used for multivariate calibration of the spectrophotometric data. The orthogonal signal correction (OSC) was used for preprocessing of data matrices and the prediction results of model, with and without using OSC, were statistically compared. MA-DLLME-OSC-PLS method was presented for the first time in this study. The root mean squares error of prediction (RMSEP) for uranium determination using PLS and OSC-PLS models were 4.63 and 0.98, respectively. This procedure allows the determination of uranium synthesis and real samples such as waste water with good reliability of the determination. Copyright © 2014. Published by Elsevier B.V.

The study design elements employed by researchers in preclinical animal experiments from two research domains and implications for automation of systematic reviews.

PubMed

O'Connor, Annette M; Totton, Sarah C; Cullen, Jonah N; Ramezani, Mahmood; Kalivarapu, Vijay; Yuan, Chaohui; Gilbert, Stephen B

2018-01-01

Systematic reviews are increasingly using data from preclinical animal experiments in evidence networks. Further, there are ever-increasing efforts to automate aspects of the systematic review process. When assessing systematic bias and unit-of-analysis errors in preclinical experiments, it is critical to understand the study design elements employed by investigators. Such information can also inform prioritization of automation efforts that allow the identification of the most common issues. The aim of this study was to identify the design elements used by investigators in preclinical research in order to inform unique aspects of assessment of bias and error in preclinical research. Using 100 preclinical experiments each related to brain trauma and toxicology, we assessed design elements described by the investigators. We evaluated Methods and Materials sections of reports for descriptions of the following design elements: 1) use of comparison group, 2) unit of allocation of the interventions to study units, 3) arrangement of factors, 4) method of factor allocation to study units, 5) concealment of the factors during allocation and outcome assessment, 6) independence of study units, and 7) nature of factors. Many investigators reported using design elements that suggested the potential for unit-of-analysis errors, i.e., descriptions of repeated measurements of the outcome (94/200) and descriptions of potential for pseudo-replication (99/200). Use of complex factor arrangements was common, with 112 experiments using some form of factorial design (complete, incomplete or split-plot-like). In the toxicology dataset, 20 of the 100 experiments appeared to use a split-plot-like design, although no investigators used this term. The common use of repeated measures and factorial designs means understanding bias and error in preclinical experimental design might require greater expertise than simple parallel designs. Similarly, use of complex factor arrangements creates novel challenges for accurate automation of data extraction and bias and error assessment in preclinical experiments.

Formulation optimization of gentamicin loaded Eudragit RS100 microspheres using factorial design study.

PubMed

Singh, Deependra; Saraf, Swarnlata; Dixit, Vinod Kumar; Saraf, Shailendra

2008-04-01

Gentamicin-Eudragit RS100 microspheres were prepared by modified double emulsion method. A 3(2) full factorial experiment was designed to study the effects of the composition of outer aqueous phase in terms of amount of glycerol (viscosity effect) and sodium chloride (osmotic pressure gradient effect) on the entrapment efficiency and % yield and microsphere size. The results of analysis of variance test for responses measured indicated that the test is significant (p>0.05). The contribution of sodium chloride concentration was found to be higher on entrapment efficiency and % yield, whereas glycerol produced significant effect on the mean diameter of microspheres. Microspheres demonstrated spherical particles in the size range of 33.24-60.43 microm. In vitro release profile of optimized formulation demonstrated sustained release for 24 h following Higuchi kinetics. Finally, drug bioactivity was found to remain intact after microencapsulation. Response surface graphs are presented to examine the effects of independent variables on the responses studied. Thus, by formulation design important parameters affecting formulation characteristics of gentamicin loaded Eudragit RS100 microspheres can be identified for controlled delivery with desirable characters in terms of maximum entrapment and yield.

Optimization of a chondrogenic medium through the use of factorial design of experiments.

PubMed

Enochson, Lars; Brittberg, Mats; Lindahl, Anders

2012-12-01

The standard culture system for in vitro cartilage research is based on cells in a three-dimensional micromass culture and a defined medium containing the chondrogenic key growth factor, transforming growth factor (TGF)-β1. The aim of this study was to optimize the medium for chondrocyte micromass culture. Human chondrocytes were cultured in different media formulations, designed with a factorial design of experiments (DoE) approach and based on the standard medium for redifferentiation. The significant factors for the redifferentiation of the chondrocytes were determined and optimized in a two-step process through the use of response surface methodology. TGF-β1, dexamethasone, and glucose were significant factors for differentiating the chondrocytes. Compared to the standard medium, TGF-β1 was increased 30%, dexamethasone reduced 50%, and glucose increased 22%. The potency of the optimized medium was validated in a comparative study against the standard medium. The optimized medium resulted in micromass cultures with increased expression of genes important for the articular chondrocyte phenotype and in cultures with increased glycosaminoglycan/DNA content. Optimizing the standard medium with the efficient DoE method, a new medium that gave better redifferentiation for articular chondrocytes was determined.

Procedure for developing experimental designs for accelerated tests for service-life prediction. [for solar cell modules

NASA Technical Reports Server (NTRS)

Thomas, R. E.; Gaines, G. B.

1978-01-01

Recommended design procedures to reduce the complete factorial design by retaining information on anticipated important interaction effects, and by generally giving up information on unconditional main effects are discussed. A hypothetical photovoltaic module used in the test design is presented. Judgments were made of the relative importance of various environmental stresses such as UV radiation, abrasion, chemical attack, temperature, mechanical stress, relative humidity and voltage. Consideration is given to a complete factorial design and its graphical representation, elimination of selected test conditions, examination and improvement of an engineering design, and parametric study. The resulting design consists of a mix of conditional main effects and conditional interactions and represents a compromise between engineering and statistical requirements.

Automation U.S.A.: Overcoming Barriers to Automation.

ERIC Educational Resources Information Center

Brody, Herb

1985-01-01

Although labor unions and inadequate technology play minor roles, the principal barrier to factory automation is "fear of change." Related problems include long-term benefits, nontechnical executives, and uncertainty of factory cost accounting. Industry support for university programs is helping to educate engineers to design, implement, and…

Development and Optimization of Dispersible Tablet of Bacopa monnieri with Improved Functionality for Memory Enhancement

PubMed Central

Thakkar, Vaishali Tejas; Deshmukh, Amol; Hingorani, Lal; Juneja, Payal; Baldaniya, Lalji; Patel, Asha; Pandya, Tosha; Gohel, Mukesh

2017-01-01

Introduction: The Bacopa monnieri is traditional Ayurvedic medicine, and reported for memory-enhancing effects. The Bacoside is poorly soluble, bitter in taste and responsible for the memory enhancement action. Memory enhancer is commonly prescribed for children or elder people. Objective: Poor solubility, patient compliance and bitterness were a major driving force to develop taste masked β-cyclodextrin complex and dispersible tablets. Materials and Methods: The inclusion complex of Bacopa monnieri and β-cyclodextrin was prepared in different molar ratios of Bacopa monnieri by Co-precipitation method. Phase solubility study was conducted to evaluate the effect of β-cyclodextrin on aqueous solubility of Bacoside A. The characterization was determined by Fourier transformation infrared spectroscopy (FTIR),Differential scanning calorimetry (DSC) and X-ray diffraction study (XRD).Crospovidone and croscarmallose sodium were used as super disintigrant. The 32 full factorial design was adopted to investigate the influence of two superdisintegrants on the wetting time and disntegration time of the tablets. Conclusion: The result revels that molar ratio (1:4) of inclusion complex enhance 3-fold solubility. Full factorial design was successfully employed for the optimization of dispersible tablet of B. monnieri. The short-term accelerated stability study confirmed that high stability of B. monnieri in inclusion complex. PMID:28979076

Muon Accelerator Program (MAP) | Neutrino Factory | Research Goals

Science.gov Websites

; Committees Research Goals Research & Development Design & Simulation Technology Development Systems Demonstrations Activities MASS Muon Cooling MuCool Test Area MICE Experiment MERIT Muon Collider Research Goals Why Muons at the Energy Frontier? How does it work? Graphics Animation Neutrino Factory Research Goals

The Old Factory

ERIC Educational Resources Information Center

Roman, Harry T.

2007-01-01

Technology education is not just about things, systems, and processes. It can also be about history, people, technological change, and impacts on society. In this design challenge, one uses technology education principles and ideas to convert an old factory into a museum and learning center. The challenge with this historical resource is to think…

Computational tools and lattice design for the PEP-II B-Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Y.; Irwin, J.; Nosochkov, Y.

1997-02-01

Several accelerator codes were used to design the PEP-II lattices, ranging from matrix-based codes, such as MAD and DIMAD, to symplectic-integrator codes, such as TRACY and DESPOT. In addition to element-by-element tracking, we constructed maps to determine aberration strengths. Furthermore, we have developed a fast and reliable method (nPB tracking) to track particles with a one-turn map. This new technique allows us to evaluate performance of the lattices on the entire tune-plane. Recently, we designed and implemented an object-oriented code in C++ called LEGO which integrates and expands upon TRACY and DESPOT. {copyright} {ital 1997 American Institute of Physics.}

Computational tools and lattice design for the PEP-II B-Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai Yunhai; Irwin, John; Nosochkov, Yuri

1997-02-01

Several accelerator codes were used to design the PEP-II lattices, ranging from matrix-based codes, such as MAD and DIMAD, to symplectic-integrator codes, such as TRACY and DESPOT. In addition to element-by-element tracking, we constructed maps to determine aberration strengths. Furthermore, we have developed a fast and reliable method (nPB tracking) to track particles with a one-turn map. This new technique allows us to evaluate performance of the lattices on the entire tune-plane. Recently, we designed and implemented an object-oriented code in C++ called LEGO which integrates and expands upon TRACY and DESPOT.

Development of Energy Models for Production Systems and Processes to Inform Environmentally Benign Decision-Making

NASA Astrophysics Data System (ADS)

Diaz-Elsayed, Nancy

Between 2008 and 2035 global energy demand is expected to grow by 53%. While most industry-level analyses of manufacturing in the United States (U.S.) have traditionally focused on high energy consumers such as the petroleum, chemical, paper, primary metal, and food sectors, the remaining sectors account for the majority of establishments in the U.S. Specifically, of the establishments participating in the Energy Information Administration's Manufacturing Energy Consumption Survey in 2006, the non-energy intensive" sectors still consumed 4*109 GJ of energy, i.e., one-quarter of the energy consumed by the manufacturing sectors, which is enough to power 98 million homes for a year. The increasing use of renewable energy sources and the introduction of energy-efficient technologies in manufacturing operations support the advancement towards a cleaner future, but having a good understanding of how the systems and processes function can reduce the environmental burden even further. To facilitate this, methods are developed to model the energy of manufacturing across three hierarchical levels: production equipment, factory operations, and industry; these methods are used to accurately assess the current state and provide effective recommendations to further reduce energy consumption. First, the energy consumption of production equipment is characterized to provide machine operators and product designers with viable methods to estimate the environmental impact of the manufacturing phase of a product. The energy model of production equipment is tested and found to have an average accuracy of 97% for a product requiring machining with a variable material removal rate profile. However, changing the use of production equipment alone will not result in an optimal solution since machines are part of a larger system. Which machines to use, how to schedule production runs while accounting for idle time, the design of the factory layout to facilitate production, and even the machining parameters --- these decisions affect how much energy is utilized during production. Therefore, at the facility level a methodology is presented for implementing priority queuing while accounting for a high product mix in a discrete event simulation environment. A baseline case is presented and alternative factory designs are suggested, which lead to energy savings of approximately 9%. At the industry level, the majority of energy consumption for manufacturing facilities is utilized for machine drive, process heating, and HVAC. Numerous studies have characterized the energy of manufacturing processes and HVAC equipment, but energy data is often limited for a facility in its entirety since manufacturing companies often lack the appropriate sensors to track it and are hesitant to release this information for confidentiality purposes. Without detailed information about the use of energy in manufacturing sites, the scope of factory studies cannot be adequately defined. Therefore, the breakdown of energy consumption of sectors with discrete production is presented, as well as a case study assessing the electrical energy consumption, greenhouse gas emissions, their associated costs, and labor costs for selected sites in the United States, Japan, Germany, China, and India. By presenting energy models and assessments of production equipment, factory operations, and industry, this dissertation provides a comprehensive assessment of energy trends in manufacturing and recommends methods that can be used beyond these case studies and industries to reduce consumption and contribute to an energy-efficient future.

The Operator Guide: An Ambient Persuasive Interface in the Factory

NASA Astrophysics Data System (ADS)

Meschtscherjakov, Alexander; Reitberger, Wolfgang; Pöhr, Florian; Tscheligi, Manfred

In this paper we introduce the context of a semiconductor factory as a promising area for the application of innovative interaction approaches. In order to increase efficiency ambient persuasive interfaces, which influence the operators' behaviour to perform in an optimized way, could constitute a potential strategy. We present insights gained from qualitative studies conducted in a specific semiconductor factory and provide a description of typical work processes and already deployed interfaces in this context. These findings informed the design of a prototype of an ambient persuasive interface within this realm - the "Operator Guide". Its overall aim is to improve work efficiency, while still maintaining a minimal error rate. We provide a detailed description of the Operator Guide along with an outlook of the next steps within a user-centered design approach.

Development of a research method to measure insoluble and soluble starch in sugarcane factory and refinery products

USDA-ARS?s Scientific Manuscript database

A rapid, quantitative research method using microwave-assisted probe ultrasonication was developed to facilitate the determination of total insoluble, and soluble starch in various sugar factory and refinery products. Several variables that affect starch solubilization were evaluated: 1) conductiv...

An Automated and Continuous Plant Weight Measurement System for Plant Factory

PubMed Central

Chen, Wei-Tai; Yeh, Yu-Hui F.; Liu, Ting-Yu; Lin, Ta-Te

2016-01-01

In plant factories, plants are usually cultivated in nutrient solution under a controllable environment. Plant quality and growth are closely monitored and precisely controlled. For plant growth evaluation, plant weight is an important and commonly used indicator. Traditional plant weight measurements are destructive and laborious. In order to measure and record the plant weight during plant growth, an automated measurement system was designed and developed herein. The weight measurement system comprises a weight measurement device and an imaging system. The weight measurement device consists of a top disk, a bottom disk, a plant holder and a load cell. The load cell with a resolution of 0.1 g converts the plant weight on the plant holder disk to an analog electrical signal for a precise measurement. The top disk and bottom disk are designed to be durable for different plant sizes, so plant weight can be measured continuously throughout the whole growth period, without hindering plant growth. The results show that plant weights measured by the weight measurement device are highly correlated with the weights estimated by the stereo-vision imaging system; hence, plant weight can be measured by either method. The weight growth of selected vegetables growing in the National Taiwan University plant factory were monitored and measured using our automated plant growth weight measurement system. The experimental results demonstrate the functionality, stability and durability of this system. The information gathered by this weight system can be valuable and beneficial for hydroponic plants monitoring research and agricultural research applications. PMID:27066040

An Automated and Continuous Plant Weight Measurement System for Plant Factory.

PubMed

Chen, Wei-Tai; Yeh, Yu-Hui F; Liu, Ting-Yu; Lin, Ta-Te

2016-01-01

In plant factories, plants are usually cultivated in nutrient solution under a controllable environment. Plant quality and growth are closely monitored and precisely controlled. For plant growth evaluation, plant weight is an important and commonly used indicator. Traditional plant weight measurements are destructive and laborious. In order to measure and record the plant weight during plant growth, an automated measurement system was designed and developed herein. The weight measurement system comprises a weight measurement device and an imaging system. The weight measurement device consists of a top disk, a bottom disk, a plant holder and a load cell. The load cell with a resolution of 0.1 g converts the plant weight on the plant holder disk to an analog electrical signal for a precise measurement. The top disk and bottom disk are designed to be durable for different plant sizes, so plant weight can be measured continuously throughout the whole growth period, without hindering plant growth. The results show that plant weights measured by the weight measurement device are highly correlated with the weights estimated by the stereo-vision imaging system; hence, plant weight can be measured by either method. The weight growth of selected vegetables growing in the National Taiwan University plant factory were monitored and measured using our automated plant growth weight measurement system. The experimental results demonstrate the functionality, stability and durability of this system. The information gathered by this weight system can be valuable and beneficial for hydroponic plants monitoring research and agricultural research applications.

A factorial assessment of the sensitivity of the BATS land-surface parameterization scheme. [BATS (Biosphere-Atmosphere Transfer Scheme)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson-Sellers, A.

Land-surface schemes developed for incorporation into global climate models include parameterizations that are not yet fully validated and depend upon the specification of a large (20-50) number of ecological and soil parameters, the values of which are not yet well known. There are two methods of investigating the sensitivity of a land-surface scheme to prescribed values: simple one-at-a-time changes or factorial experiments. Factorial experiments offer information about interactions between parameters and are thus a more powerful tool. Here the results of a suite of factorial experiments are reported. These are designed (i) to illustrate the usefulness of this methodology andmore » (ii) to identify factors important to the performance of complex land-surface schemes. The Biosphere-Atmosphere Transfer Scheme (BATS) is used and its sensitivity is considered (a) to prescribed ecological and soil parameters and (b) to atmospheric forcing used in the off-line tests undertaken. Results indicate that the most important atmospheric forcings are mean monthly temperature and the interaction between mean monthly temperature and total monthly precipitation, although fractional cloudiness and other parameters are also important. The most important ecological parameters are vegetation roughness length, soil porosity, and a factor describing the sensitivity of the stomatal resistance of vegetation to the amount of photosynthetically active solar radiation and, to a lesser extent, soil and vegetation albedos. Two-factor interactions including vegetation roughness length are more important than many of the 23 specified single factors. The results of factorial sensitivity experiments such as these could form the basis for intercomparison of land-surface parameterization schemes and for field experiments and satellite-based observation programs aimed at improving evaluation of important parameters.« less

Optimization of the SPME parameters and its online coupling with HPLC for the analysis of tricyclic antidepressants in plasma samples.

PubMed

Alves, Claudete; Fernandes, Christian; Dos Santos Neto, Alvaro José; Rodrigues, José Carlos; Costa Queiroz, Maria Eugênia; Lanças, Fernando Mauro

2006-07-01

Solid-phase microextraction (SPME)-liquid chromatography (LC) is used to analyze tricyclic antidepressant drugs desipramine, imipramine, nortriptyline, amitriptyline, and clomipramine (internal standard) in plasma samples. Extraction conditions are optimized using a 2(3) factorial design plus a central point to evaluate the influence of the time, temperature, and matrix pH. A Polydimethylsiloxane-divinylbenzene (60-mum film thickness) fiber is selected after the assessment of different types of coating. The chromatographic separation is realized using a C(18) column (150 x 4.6 mm, 5-microm particles), ammonium acetate buffer (0.05 mol/L, pH 5.50)-acetonitrile (55:45 v/v) with 0.1% of triethylamine as mobile phase and UV-vis detection at 214 nm. Among the factorial design conditions evaluated, the best results are obtained at a pH 11.0, temperature of 30 degrees C, and extraction time of 45 min. The proposed method, using a lab-made SPME-LC interface, allowed the determination of tricyclic antidepressants in in plasma at therapeutic concentration levels.

Exposure to movie smoking, antismoking ads and smoking intensity: an experimental study with a factorial design

PubMed Central

Harakeh, Zeena; Engels, Rutger C M E; Vohs, Kathleen; van Baaren, Rick B; Sargent, James

2013-01-01

Background This study examines whether smoking portrayal in movies or antismoking advertisements affect smoking intensity among young adults. Methods We conducted an experimental study in which 84 smokers were randomly assigned using a two (no-smoking versus smoking portrayal in the movie) by three (two prosocial ads, two antismoking ads or one of each) factorial design. Participants viewed a 60-minute movie with two commercial breaks and afterwards completed a questionnaire. Smoking during the session was allowed and observed. Results Exposure to the movie with smoking had no effect on smoking intensity. Those who viewed two antismoking ads had significantly lower smoking intensity compared with those who viewed two prosocial ads. There was no interaction between movie smoking and antismoking ads. Baseline CO (carbon monoxide) level had the largest effect on smoking intensity. Conclusion These findings provide further evidence to support antismoking ads placed with movies because of their possible effect on young adult smoking behaviour. However, caution is warranted, because nicotine dependence appears to be the primary predictor of smoking intensity among young adult smokers in this study. PMID:20008155

Polymeric nanoparticles loaded with the 3,5,3'-triiodothyroacetic acid (Triac), a thyroid hormone: factorial design, characterization, and release kinetics.

PubMed

Dos Santos, Karen C; da Silva, Maria Fatima Gf; Pereira-Filho, Edenir R; Fernandes, Joao B; Polikarpov, Igor; Forim, Moacir R

2012-01-01

This present investigation deals with the development and optimization of polymeric nanoparticle systems loaded with 3,5,3'-triiodothyroacetic acid (Triac). A 2(11-6) fractional factorial design and another 2(2) factorial design were used to study the contrasts on particle size distribution, morphology, surface charge, drug content, entrapment efficiency, and in vitro drug release profiles. The independent variables were the concentration of Triac, type and quantity of both polymer and oil, quantity of Span™ 60 and Tween® 80, volume of solvent and water, and velocity of both magnetic stirring and the transfer of the organic phase into the aqueous solution. The results of optimized formulations showed a narrow size distribution with a polydispersity index lower than 0.200. The particle sizes were on average 159.6 nm and 285.6 nm for nanospheres and nanocapsules, respectively. The zeta potential was higher than 20 mV (in module) and the entrapment efficiency was nearly 100%. A high-performance liquid chromatography method was developed, validated, and efficiently applied to Triac quantification in colloidal suspension. The main independent variables were the type and quantity of the polymer and oil. In vitro drug release profile depicted several features to sustain Triac release. Different formulations showed various release rates indicating an interaction between Triac and other formulation compounds such as polymer and/or oil quantity. Two different models were identified (biexponential and monoexponential) that allowed the control of both the release rate and Triac concentration. Thus, the prepared nanoparticles described here may be of clinical importance in delivering Triac for thyroid treatment.

A factorial design to identify process parameters affecting whole mechanically disrupted rat pancreata in a perfusion bioreactor.

PubMed

Sharp, Jamie; Spitters, Tim Wgm; Vermette, Patrick

2018-03-01

Few studies report whole pancreatic tissue culture, as it is a difficult task using traditional culture methods. Here, a factorial design was used to investigate the singular and combinational effects of flow, dissolved oxygen concentration (D.O.) and pulsation on whole mechanically disrupted rat pancreata in a perfusion bioreactor. Whole rat pancreata were cultured for 72 h under defined bioreactor process conditions. Secreted insulin was measured and histological (haematoxylin and eosin (H&E)) as well as immunofluorescent insulin staining were performed and quantified. The combination of flow and D.O. had the most significant effect on secreted insulin at 5 h and 24 h. The D.O. had the biggest effect on tissue histological quality, and pulsation had the biggest effect on the number of insulin-positive structures. Based on the factorial design analysis, bioreactor conditions using high flow, low D.O., and pulsation were selected to further study glucose-stimulated insulin secretion. Here, mechanically disrupted rat pancreata were cultured for 24 h under these bioreactor conditions and were then challenged with high glucose concentration for 6 h and high glucose + IBMX (an insulin secretagogue) for a further 6 h. These cultures secreted insulin in response to high glucose concentration in the first 6 h, however stimulated-insulin secretion was markedly weaker in response to high glucose concentration + IBMX thereafter. After this bioreactor culture period, higher tissue metabolic activity was found compared to that of non-bioreacted static controls. More insulin- and glucagon-positive structures, and extensive intact endothelial structures were observed compared to non-bioreacted static cultures. H&E staining revealed more intact tissue compared to static cultures. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:432-444, 2018. © 2017 American Institute of Chemical Engineers.

Virtual Collaborative Simulation Environment for Integrated Product and Process Development

NASA Technical Reports Server (NTRS)

Gulli, Michael A.

1997-01-01

Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

Design and Construction of a High-speed Network Connecting All the Protein Crystallography Beamlines at the Photon Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsugaki, Naohiro; Yamada, Yusuke; Igarashi, Noriyuki

2007-01-19

A private network, physically separated from the facility network, was designed and constructed which covered all the four protein crystallography beamlines at the Photon Factory (PF) and Structural Biology Research Center (SBRC). Connecting all the beamlines in the same network allows for simple authentication and a common working environment for a user who uses multiple beamlines. Giga-bit Ethernet wire-speed was achieved for the communication among the beamlines and SBRC buildings.

Optimisation of asymmetric flow field-flow fractionation for the characterisation of nanoparticles in coated polydisperse TiO2 with applications in food and feed.

PubMed

Omar, J; Boix, A; Kerckhove, G; von Holst, C

2016-12-01

Titanium dioxide (TiO 2 ) has various applications in consumer products and is also used as an additive in food and feeding stuffs. For the characterisation of this product, including the determination of nanoparticles, there is a strong need for the availability of corresponding methods of analysis. This paper presents an optimisation process for the characterisation of polydisperse-coated TiO 2 nanoparticles. As a first step, probe ultrasonication was optimised using a central composite design in which the amplitude and time were the selected variables to disperse, i.e., to break up agglomerates and/or aggregates of the material. The results showed that high amplitudes (60%) favoured a better dispersion and time was fixed in mid-values (5 min). In a next step, key factors of asymmetric flow field-flow fraction (AF4), namely cross-flow (CF), detector flow (DF), exponential decay of the cross-flow (CF exp ) and focus time (Ft), were studied through experimental design. Firstly, a full-factorial design was employed to establish the statistically significant factors (p < 0.05). Then, the information obtained from the full-factorial design was utilised by applying a central composite design to obtain the following optimum conditions of the system: CF, 1.6 ml min -1 ; DF, 0.4 ml min -1 ; Ft, 5 min; and CF exp , 0.6. Once the optimum conditions were obtained, the stability of the dispersed sample was measured for 24 h by analysing 10 replicates with AF4 in order to assess the performance of the optimised dispersion protocol. Finally, the recovery of the optimised method, particle shape and particle size distribution were estimated.

Optimisation of asymmetric flow field-flow fractionation for the characterisation of nanoparticles in coated polydisperse TiO2 with applications in food and feed

PubMed Central

Omar, J.; Boix, A.; Kerckhove, G.; von Holst, C.

2016-01-01

ABSTRACT Titanium dioxide (TiO2) has various applications in consumer products and is also used as an additive in food and feeding stuffs. For the characterisation of this product, including the determination of nanoparticles, there is a strong need for the availability of corresponding methods of analysis. This paper presents an optimisation process for the characterisation of polydisperse-coated TiO2 nanoparticles. As a first step, probe ultrasonication was optimised using a central composite design in which the amplitude and time were the selected variables to disperse, i.e., to break up agglomerates and/or aggregates of the material. The results showed that high amplitudes (60%) favoured a better dispersion and time was fixed in mid-values (5 min). In a next step, key factors of asymmetric flow field-flow fraction (AF4), namely cross-flow (CF), detector flow (DF), exponential decay of the cross-flow (CFexp) and focus time (Ft), were studied through experimental design. Firstly, a full-factorial design was employed to establish the statistically significant factors (p < 0.05). Then, the information obtained from the full-factorial design was utilised by applying a central composite design to obtain the following optimum conditions of the system: CF, 1.6 ml min–1; DF, 0.4 ml min–1; Ft, 5 min; and CFexp, 0.6. Once the optimum conditions were obtained, the stability of the dispersed sample was measured for 24 h by analysing 10 replicates with AF4 in order to assess the performance of the optimised dispersion protocol. Finally, the recovery of the optimised method, particle shape and particle size distribution were estimated. PMID:27650879

Cleaner production in the ammonia-soda industry: an ecological and economic study.

PubMed

Kasikowski, T; Buczkowski, R; Lemanowska, E

2004-12-01

Five methods to reduce the negative influence of soda ash factories on the natural environment are presented: 1. obtaining calcium-magnesium phosphates by treating the suspension from raw brine purification with orthophosphoric acid (H(3)PO(4)), 2. production of precipitated chalk from soda processing waste, 3. production of gypsum and semi-brine, 4. desulphurisation of fume gases from the factory power plant, 5. utilization of distiller waste. The tests, accomplished on a laboratory scale, showed the high efficiency of these methods. Economic analysis has proved that only four out of the five presented processes can have a positive financial effect on soda ash factories, as well as being well justified economically. The value of two of the innovations presented is confirmed by their implementation in factories.

The Physics of the B Factories

DOE PAGES

Bevan, A. J.; Golob, B.; Mannel, Th.; ...

2014-11-19

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.

Generalized Factorial Moments

NASA Astrophysics Data System (ADS)

Bialas, A.

2004-02-01

It is shown that the method of eliminating the statistical fluctuations from event-by-event analysis proposed recently by Fu and Liu can be rewritten in a compact form involving the generalized factorial moments.

Physiological responses of lichens to factorial fumigations with nitric acid and ozone

Treesearch

J. Riddell; P.E. Padgett; T. Nash

2012-01-01

This paper addresses the effects of gaseous nitric acid (HNO3) and ozone (O3), two important air pollutants, on six lichen species with different morphological, ecological, and biological characteristics. The treatment chambers were set up in a factorial design consisting of control chambers, chambers fumigated with HNO

The Use of Factorial Forecasting to Predict Public Response

ERIC Educational Resources Information Center

Weiss, David J.

2012-01-01

Policies that call for members of the public to change their behavior fail if people don't change; predictions of whether the requisite changes will take place are needed prior to implementation. I propose to solve the prediction problem with Factorial Forecasting, a version of functional measurement methodology that employs group designs. Aspects…

The Game Factory: Using Cooperative Games to Promote Pro-Social Behaviour among Children

ERIC Educational Resources Information Center

Street, Helen; Hoppe, David; Kingsbury, David; Ma, Tony

2004-01-01

This study examines the use of a cooperative physical games program "The Game Factory" on social behaviour among children. Children are required to work together towards positive collective outcomes. A pretest-intervention-posttest design is used. Parents and teachers assessed 90 Australian primary school children in two experimental…

Gearing up to the factory of the future

NASA Astrophysics Data System (ADS)

Godfrey, D. E.

1985-01-01

The features of factories and manufacturing techniques and tools of the near future are discussed. The spur to incorporate new technologies on the factory floor will originate in management, who must guide the interfacing of computer-enhanced equipment with traditional manpower, materials and machines. Electronic control with responsiveness and flexibility will be the key concept in an integrated approach to processing materials. Microprocessor controlled laser and fluid cutters add accuracy to cutting operations. Unattended operation will become feasible when automated inspection is added to a work station through developments in robot vision. Optimum shop management will be achieved through AI programming of parts manufacturing, optimized work flows, and cost accounting. The automation enhancements will allow designers to affect directly parts being produced on the factory floor.

The Japanese Positron Factory

NASA Astrophysics Data System (ADS)

Okada, S.; Sunaga, H.; Kaneko, H.; Takizawa, H.; Kawasuso, A.; Yotsumoto, K.; Tanaka, R.

1999-06-01

The Positron Factory has been planned at Japan Atomic Energy Research Institute (JAERI). The factory is expected to produce linac-based monoenergetic positron beams having world-highest intensities of more than 1010e+/sec, which will be applied for R&D of materials science, biotechnology and basic physics & chemistry. In this article, results of the design studies are demonstrated for the following essential components of the facilities: 1) Conceptual design of a high-power electron linac with 100 MeV in beam energy and 100 kW in averaged beam power, 2) Performance tests of the RF window in the high-power klystron and of the electron beam window, 3) Development of a self-driven rotating electron-to-positron converter and the performance tests, 4) Proposal of multi-channel beam generation system for monoenergetic positrons, with a series of moderator assemblies based on a newly developed Monte Carlo simulation and the demonstrative experiment, 5) Proposal of highly efficient moderator structures, 6) Conceptual design of a local shield to suppress the surrounding radiation and activation levels.

A Proposal to Perform New Theoretical and Experimental Research on HumanEfficiency Through Developments Within Systems Factorial Technology (SFT)

DTIC Science & Technology

2017-05-26

Mathematical psychology. In APA Handbook of Research Methods in Psychology, Vol. 2: Research Designs: Quantitative , Qualitative, DISTRIBUTION A: Distribution...AFRL-AFOSR-VA-TR-2017-0108 A Proposal to Perform New Theoretical and Experimental Research on Human Efficiency Through Developments Within Systems...release. AF Office Of Scientific Research (AFOSR)/ RTA2 Arlington, Virginia 22203 Air Force Research Laboratory Air Force Materiel Command a. REPORT

Factorial Structure of the French Version of the Rosenberg Self-Esteem Scale among the Elderly

ERIC Educational Resources Information Center

Gana, Kamel; Alaphilippe, Daniel; Bailly, Nathalie

2005-01-01

Ten different confirmatory factor analysis models, including ones with correlated traits correlated methods, correlated traits correlated uniqueness, and correlated traits uncorrelated methods, were proposed to examine the factorial structure of the French version of the Rosenberg Self-Esteem Scale (Rosenberg, 1965). In line with previous studies…

Quantum computation with realistic magic-state factories

NASA Astrophysics Data System (ADS)

O'Gorman, Joe; Campbell, Earl T.

2017-03-01

Leading approaches to fault-tolerant quantum computation dedicate a significant portion of the hardware to computational factories that churn out high-fidelity ancillas called magic states. Consequently, efficient and realistic factory design is of paramount importance. Here we present the most detailed resource assessment to date of magic-state factories within a surface code quantum computer, along the way introducing a number of techniques. We show that the block codes of Bravyi and Haah [Phys. Rev. A 86, 052329 (2012), 10.1103/PhysRevA.86.052329] have been systematically undervalued; we track correlated errors both numerically and analytically, providing fidelity estimates without appeal to the union bound. We also introduce a subsystem code realization of these protocols with constant time and low ancilla cost. Additionally, we confirm that magic-state factories have space-time costs that scale as a constant factor of surface code costs. We find that the magic-state factory required for postclassical factoring can be as small as 6.3 million data qubits, ignoring ancilla qubits, assuming 10-4 error gates and the availability of long-range interactions.

Optimization of antibacterial activity by Gold-Thread (Coptidis Rhizoma Franch) against Streptococcus mutans using evolutionary operation-factorial design technique.

PubMed

Choi, Ung-Kyu; Kim, Mi-Hyang; Lee, Nan-Hee

2007-11-01

This study was conducted to find the optimum extraction condition of Gold-Thread for antibacterial activity against Streptococcus mutans using The evolutionary operation-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature (R2 = -0.79) and in a longer extraction time (R2 = -0.71). Antibacterial activity was not affected by differentiation of the ethanol concentration in the extraction solvent (R2 = -0.12). The maximum antibacterial activity of clove against S. mutans determined by the EVOP-factorial technique was obtained at 80 degrees C extraction temperature, 26 h extraction time, and 50% ethanol concentration. The population of S. mutans decreased from 6.110 logCFU/ml in the initial set to 4.125 logCFU/ml in the third set.

Permutation testing of orthogonal factorial effects in a language-processing experiment using fMRI.

PubMed

Suckling, John; Davis, Matthew H; Ooi, Cinly; Wink, Alle Meije; Fadili, Jalal; Salvador, Raymond; Welchew, David; Sendur, Levent; Maxim, Vochita; Bullmore, Edward T

2006-05-01

The block-paradigm of the Functional Image Analysis Contest (FIAC) dataset was analysed with the Brain Activation and Morphological Mapping software. Permutation methods in the wavelet domain were used for inference on cluster-based test statistics of orthogonal contrasts relevant to the factorial design of the study, namely: the average response across all active blocks, the main effect of speaker, the main effect of sentence, and the interaction between sentence and speaker. Extensive activation was seen with all these contrasts. In particular, different vs. same-speaker blocks produced elevated activation in bilateral regions of the superior temporal lobe and repetition suppression for linguistic materials (same vs. different-sentence blocks) in left inferior frontal regions. These are regions previously reported in the literature. Additional regions were detected in this study, perhaps due to the enhanced sensitivity of the methodology. Within-block sentence suppression was tested post-hoc by regression of an exponential decay model onto the extracted time series from the left inferior frontal gyrus, but no strong evidence of such an effect was found. The significance levels set for the activation maps are P-values at which we expect <1 false-positive cluster per image. Nominal type I error control was verified by empirical testing of a test statistic corresponding to a randomly ordered design matrix. The small size of the BOLD effect necessitates sensitive methods of detection of brain activation. Permutation methods permit the necessary flexibility to develop novel test statistics to meet this challenge.

Experimental Design for the Evaluation of Detection Techniques of Hidden Corrosion Beneath the Thermal Protective System of the Space Shuttle Orbiter

NASA Technical Reports Server (NTRS)

Kemmerer, Catherine C.; Jacoby, Joseph A.; Lomness, Janice K.; Hintze, Paul E.; Russell, Richard W.

2007-01-01

The detection of corrosion beneath Space Shuttle Orbiter thermal protective system is traditionally accomplished by removing the Reusable Surface Insulation tiles and performing a visual inspection of the aluminum substrate and corrosion protection system. This process is time consuming and has the potential to damage high cost tiles. To evaluate non-intrusive NDE methods, a Proof of Concept (PoC) experiment was designed and test panels were manufactured. The objective of the test plan was three-fold: establish the ability to detect corrosion hidden from view by tiles; determine the key factor affecting detectability; roughly quantify the detection threshold. The plan consisted of artificially inducing dimensionally controlled corrosion spots in two panels and rebonding tile over the spots to model the thermal protective system of the orbiter. The corrosion spot diameter ranged from 0.100" to 0.600" inches and the depth ranged from 0.003" to 0.020". One panel consisted of a complete factorial array of corrosion spots with and without tile coverage. The second panel consisted of randomized factorial points replicated and hidden by tile. Conventional methods such as ultrasonics, infrared, eddy current and microwave methods have shortcomings. Ultrasonics and IR cannot sufficiently penetrate the tiles, while eddy current and microwaves have inadequate resolution. As such, the panels were interrogated using Backscatter Radiography and Terahertz Imaging. The terahertz system successfully detected artificially induced corrosion spots under orbiter tile and functional testing is in-work in preparation for implementation.

Investigation of Springback Associated with Composite Material Component Fabrication (MSFC Center Director's Discretionary Fund Final Report, Project 94-09)

NASA Technical Reports Server (NTRS)

Benzie, M. A.

1998-01-01

The objective of this research project was to examine processing and design parameters in the fabrication of composite components to obtain a better understanding and attempt to minimize springback associated with composite materials. To accomplish this, both processing and design parameters were included in a Taguchi-designed experiment. Composite angled panels were fabricated, by hand layup techniques, and the fabricated panels were inspected for springback effects. This experiment yielded several significant results. The confirmation experiment validated the reproducibility of the factorial effects, error recognized, and experiment as reliable. The material used in the design of tooling needs to be a major consideration when fabricating composite components, as expected. The factors dealing with resin flow, however, raise several potentially serious material and design questions. These questions must be dealt with up front in order to minimize springback: viscosity of the resin, vacuum bagging of the part for cure, and the curing method selected. These factors directly affect design, material selection, and processing methods.

Reversed phase HPLC for strontium ranelate: Method development and validation applying experimental design.

PubMed

Kovács, Béla; Kántor, Lajos Kristóf; Croitoru, Mircea Dumitru; Kelemen, Éva Katalin; Obreja, Mona; Nagy, Előd Ernő; Székely-Szentmiklósi, Blanka; Gyéresi, Árpád

2018-06-01

A reverse-phase HPLC (RP-HPLC) method was developed for strontium ranelate using a full factorial, screening experimental design. The analytical procedure was validated according to international guidelines for linearity, selectivity, sensitivity, accuracy and precision. A separate experimental design was used to demonstrate the robustness of the method. Strontium ranelate was eluted at 4.4 minutes and showed no interference with the excipients used in the formulation, at 321 nm. The method is linear in the range of 20-320 μg mL-1 (R2 = 0.99998). Recovery, tested in the range of 40-120 μg mL-1, was found to be 96.1-102.1 %. Intra-day and intermediate precision RSDs ranged from 1.0-1.4 and 1.2-1.4 %, resp. The limit of detection and limit of quantitation were 0.06 and 0.20 μg mL-1, resp. The proposed technique is fast, cost-effective, reliable and reproducible, and is proposed for the routine analysis of strontium ranelate.

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation

PubMed Central

2016-01-01

Background In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. Objectives To examine how well suppliers’ chemical health and safety performance complies with buyers’ CSR policies and whether audited factories improve their performance. Methods CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Results Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Conclusions Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits. PMID:27611103

More ethical and more efficient clinical research: multiplex trial design.

PubMed

Keus, Frederik; van der Horst, Iwan C C; Nijsten, Maarten W

2014-08-14

Today's clinical research faces challenges such as a lack of clinical equipoise between treatment arms, reluctance in randomizing for multiple treatments simultaneously, inability to address interactions and increasingly restricted resources. Furthermore, many trials are biased by extensive exclusion criteria, relatively small sample size and less appropriate outcome measures. We propose a 'Multiplex' trial design that preserves clinical equipoise with a continuous and factorial trial design that will also result in more efficient use of resources. This multiplex design accommodates subtrials with appropriate choice of treatment arms within each subtrial. Clinical equipoise should increase consent rates while the factorial design is the best way to identify interactions. The multiplex design may evolve naturally from today's research limitations and challenges, while principal objections seem absent. However this new design poses important infrastructural, organisational and psychological challenges that need in depth consideration.

Advances and prospects of Bacillus subtilis cellular factories: From rational design to industrial applications.

PubMed

Gu, Yang; Xu, Xianhao; Wu, Yaokang; Niu, Tengfei; Liu, Yanfeng; Li, Jianghua; Du, Guocheng; Liu, Long

2018-05-15

Bacillus subtilis is the most characterized gram-positive bacterium that has significant attributes, such as growing well on cheap carbon sources, possessing clear inherited backgrounds, having mature genetic manipulation methods, and exhibiting robustness in large-scale fermentations. Till date, B. subtilis has been identified as attractive hosts for the production of recombinant proteins and chemicals. By applying various systems and synthetic biology tools, the productivity features of B. subtilis can be thoroughly analyzed and further optimized via metabolic engineering. In the present review, we discussed why B. subtilis is the primary organisms used for metabolic engineering and industrial applications. Additionally, we summarized the recent advances in systems and synthetic biology, engineering strategies for improving cellular performances, and metabolic engineering applications of B. subtilis. In particular, we proposed emerging opportunities and essential strategies to enable the successful development of B. subtilis as microbial cell factories. Copyright © 2018. Published by Elsevier Inc.

Assessing motivation for work environment improvements: internal consistency, reliability and factorial structure.

PubMed

Hedlund, Ann; Ateg, Mattias; Andersson, Ing-Marie; Rosén, Gunnar

2010-04-01

Workers' motivation to actively take part in improvements to the work environment is assumed to be important for the efficiency of investments for that purpose. That gives rise to the need for a tool to measure this motivation. A questionnaire to measure motivation for improvements to the work environment has been designed. Internal consistency and test-retest reliability of the domains of the questionnaire have been measured, and the factorial structure has been explored, from the answers of 113 employees. The internal consistency is high (0.94), as well as the correlation for the total score (0.84). Three factors are identified accounting for 61.6% of the total variance. The questionnaire can be a useful tool in improving intervention methods. The expectation is that the tool can be useful, particularly with the aim of improving efficiency of companies' investments for work environment improvements. Copyright 2010 Elsevier Ltd. All rights reserved.

Etoricoxib - preemptive and postoperative analgesia (EPPA) in patients with laparotomy or thoracotomy - design and protocols

PubMed Central

2010-01-01

Background and Objective Our objective was to report on the design and essentials of the Etoricoxib protocol- Preemptive and Postoperative Analgesia (EPPA) Trial, investigating whether preemptive analgesia with cox-2 inhibitors is more efficacious than placebo in patients who receive either laparotomy or thoracotomy. Design and Methods The study is a 2 × 2 factorial armed, double blinded, bicentric, randomised placebo-controlled trial comparing (a) etoricoxib and (b) placebo in a pre- and postoperative setting. The total observation period is 6 months. According to a power analysis, 120 patients scheduled for abdominal or thoracic surgery will randomly be allocated to either the preemptive or the postoperative treatment group. These two groups are each divided into two arms. Preemptive group patients receive etoricoxib prior to surgery and either etoricoxib again or placebo postoperatively. Postoperative group patients receive placebo prior to surgery and either placebo again or etoricoxib after surgery (2 × 2 factorial study design). The Main Outcome Measure is the cumulative use of morphine within the first 48 hours after surgery (measured by patient controlled analgesia PCA). Secondary outcome parameters include a broad range of tests including sensoric perception and genetic polymorphisms. Discussion The results of this study will provide information on the analgesic effectiveness of etoricoxib in preemptive analgesia and will give hints on possible preventive effects of persistent pain. Trial registration NCT00716833 PMID:20504378

Robust tests for multivariate factorial designs under heteroscedasticity.

PubMed

Vallejo, Guillermo; Ato, Manuel

2012-06-01

The question of how to analyze several multivariate normal mean vectors when normality and covariance homogeneity assumptions are violated is considered in this article. For the two-way MANOVA layout, we address this problem adapting results presented by Brunner, Dette, and Munk (BDM; 1997) and Vallejo and Ato (modified Brown-Forsythe [MBF]; 2006) in the context of univariate factorial and split-plot designs and a multivariate version of the linear model (MLM) to accommodate heterogeneous data. Furthermore, we compare these procedures with the Welch-James (WJ) approximate degrees of freedom multivariate statistics based on ordinary least squares via Monte Carlo simulation. Our numerical studies show that of the methods evaluated, only the modified versions of the BDM and MBF procedures were robust to violations of underlying assumptions. The MLM approach was only occasionally liberal, and then by only a small amount, whereas the WJ procedure was often liberal if the interactive effects were involved in the design, particularly when the number of dependent variables increased and total sample size was small. On the other hand, it was also found that the MLM procedure was uniformly more powerful than its most direct competitors. The overall success rate was 22.4% for the BDM, 36.3% for the MBF, and 45.0% for the MLM.

Estimation of design space for an extrusion-spheronization process using response surface methodology and artificial neural network modelling.

PubMed

Sovány, Tamás; Tislér, Zsófia; Kristó, Katalin; Kelemen, András; Regdon, Géza

2016-09-01

The application of the Quality by Design principles is one of the key issues of the recent pharmaceutical developments. In the past decade a lot of knowledge was collected about the practical realization of the concept, but there are still a lot of unanswered questions. The key requirement of the concept is the mathematical description of the effect of the critical factors and their interactions on the critical quality attributes (CQAs) of the product. The process design space (PDS) is usually determined by the use of design of experiment (DoE) based response surface methodologies (RSM), but inaccuracies in the applied polynomial models often resulted in the over/underestimation of the real trends and changes making the calculations uncertain, especially in the edge regions of the PDS. The completion of RSM with artificial neural network (ANN) based models is therefore a commonly used method to reduce the uncertainties. Nevertheless, since the different researches are focusing on the use of a given DoE, there is lack of comparative studies on different experimental layouts. Therefore, the aim of present study was to investigate the effect of the different DoE layouts (2 level full factorial, Central Composite, Box-Behnken, 3 level fractional and 3 level full factorial design) on the model predictability and to compare model sensitivities according to the organization of the experimental data set. It was revealed that the size of the design space could differ more than 40% calculated with different polynomial models, which was associated with a considerable shift in its position when higher level layouts were applied. The shift was more considerable when the calculation was based on RSM. The model predictability was also better with ANN based models. Nevertheless, both modelling methods exhibit considerable sensitivity to the organization of the experimental data set, and the use of design layouts is recommended, where the extreme values factors are more represented. Copyright © 2016 Elsevier B.V. All rights reserved.

Engineering microbial cell factories for the production of plant natural products: from design principles to industrial-scale production.

PubMed

Liu, Xiaonan; Ding, Wentao; Jiang, Huifeng

2017-07-19

Plant natural products (PNPs) are widely used as pharmaceuticals, nutraceuticals, seasonings, pigments, etc., with a huge commercial value on the global market. However, most of these PNPs are still being extracted from plants. A resource-conserving and environment-friendly synthesis route for PNPs that utilizes microbial cell factories has attracted increasing attention since the 1940s. However, at the present only a handful of PNPs are being produced by microbial cell factories at an industrial scale, and there are still many challenges in their large-scale application. One of the challenges is that most biosynthetic pathways of PNPs are still unknown, which largely limits the number of candidate PNPs for heterologous microbial production. Another challenge is that the metabolic fluxes toward the target products in microbial hosts are often hindered by poor precursor supply, low catalytic activity of enzymes and obstructed product transport. Consequently, despite intensive studies on the metabolic engineering of microbial hosts, the fermentation costs of most heterologously produced PNPs are still too high for industrial-scale production. In this paper, we review several aspects of PNP production in microbial cell factories, including important design principles and recent progress in pathway mining and metabolic engineering. In addition, implemented cases of industrial-scale production of PNPs in microbial cell factories are also highlighted.

Recent progress in neutrino factory and muon collider research within the Muon Collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. M. Alsharoa; Charles M. Ankenbrandt; Muzaffer Atac

2003-08-01

We describe the status of our effort to realize a first neutrino factory and the progress made in understanding the problems associated with the collection and cooling of muons towards that end. We summarize the physics that can be done with neutrino factories as well as with intense cold beams of muons. The physics potential of muon colliders is reviewed, both as Higgs Factories and compact high energy lepton colliders. The status and timescale of our research and development effort is reviewed as well as the latest designs in cooling channels including the promise of ring coolers in achieving longitudinalmore » and transverse cooling simultaneously. We detail the efforts being made to mount an international cooling experiment to demonstrate the ionization cooling of muons.« less

Application study of evolutionary operation methods in optimization of process parameters for mosquito coils industry

NASA Astrophysics Data System (ADS)

Ginting, E.; Tambunanand, M. M.; Syahputri, K.

2018-02-01

Evolutionary Operation Methods (EVOP) is a method that is designed used in the process of running or operating routinely in the company to enables high productivity. Quality is one of the critical factors for a company to win the competition. Because of these conditions, the research for products quality has been done by gathering the production data of the company and make a direct observation to the factory floor especially the drying department to identify the problem which is the high water content in the mosquito incense coil. PT.X which is producing mosquito coils attempted to reduce product defects caused by the inaccuracy of operating conditions. One of the parameters of good quality insect repellent that is water content, that if the moisture content is too high then the product easy to mold and broken, and vice versa if it is too low the products are easily broken and burn shorter hours. Three factors that affect the value of the optimal water content, the stirring time, drying temperature and drying time. To obtain the required conditions Evolutionary Operation (EVOP) methods is used. Evolutionary Operation (EVOP) is used as an efficient technique for optimization of two or three variable experimental parameters using two-level factorial designs with center point. Optimal operating conditions in the experiment are stirring time performed for 20 minutes, drying temperature at 65°C, and drying time for 130 minutes. The results of the analysis based on the method of Evolutionary Operation (EVOP) value is the optimum water content of 6.90%, which indicates the value has approached the optimal in a production plant that is 7%.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogomilov, M.; Matev, R.; Tsenov, R.

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable ofmore » making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.« less

THE EXPERIMENTAL DESIGN FOR BeO IRAADIATION EXPERIMENTS ORNL 41-8 AND ORNL 41-9

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardiner, D.A.

1962-07-18

The experimental plan for irradiating BeO pellets in Experiments ORNL 41- 8 and ORNL 41-9 was chosen in accordance with the principles of experimental design. The design is known by statisticians as a 2/sup 5/ factorial experiment confound'' in six replications. Five variables---size, density, grain size, temperature and time--are controlled at two levels to form the basic 2i factorial experiment. The sixth variable, neutron flux, is introduced by confounding on higher-order interactions. An explanation is presented in nontechnical language the means by which the aims of the experimenters and the physical conditions affecting the experiment were utilized in constructing themore » experimental design. (auth)« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heaney, Mike

Statistically designed experiments can save researchers time and money by reducing the number of necessary experimental trials, while resulting in more conclusive experimental results. Surprisingly, many researchers are still not aware of this efficient and effective experimental methodology. As reported in a 2013 article from Chemical & Engineering News, there has been a resurgence of this methodology in recent years (http://cen.acs.org/articles/91/i13/Design-Experiments-Makes-Comeback.html?h=2027056365). This presentation will provide a brief introduction to statistically designed experiments. The main advantages will be reviewed along with the some basic concepts such as factorial and fractional factorial designs. The recommended sequential approach to experiments will be introducedmore » and finally a case study will be presented to demonstrate this methodology.« less

Formulation, optimization, and evaluation of self-emulsifying drug delivery systems of nevirapine

PubMed Central

Chintalapudi, Ramprasad; Murthy, T. E. G. K.; Lakshmi, K. Rajya; Manohar, G. Ganesh

2015-01-01

Background: The aim of the present study was to formulate and optimize the self-emulsifying drug delivery systems (SEDDS) of nevirapine (NVP) by use of 22 factorial designs to enhance the oral absorption of NVP by improving its solubility, dissolution rate, and diffusion profile. SEDDS are the isotropic mixtures of oil, surfactant, co-surfactant and drug that form oil in water microemulsion when introduced into the aqueous phase under gentle agitation. Materials and Methods: Solubility of NVP in different oils, surfactants, and co-surfactants was determined for the screening of excipients. Pseudo-ternary phase diagrams were constructed by the aqueous titration method, and formulations were developed based on the optimum excipient combinations with the help of data obtained through the maximum micro emulsion region containing combinations of oil, surfactant, and co-surfactant. The formulations of SEDDS were optimized by 22 factorial designs. Results: The optimum formulation of SEDDS contains 32.5% oleic acid, 44.16% tween 20, and 11.9% polyethylene glycol 600 as oil, surfactant, and co-surfactant respectively. The SEDDS was evaluated for the following drug content, self-emulsification time, rheological properties, zeta potential, in vitro diffusion studies, thermodynamic stability studies, and in vitro dissolution studies. An increase in dissolution was achieved by SEDDS compared to pure form of NVP. Conclusion: Overall, this study suggests that the dissolution and oral bioavailability of NVP could be improved by SEDDS technology. PMID:26682191

Novel lectin-modified poly(ethylene-co-vinyl acetate) mucoadhesive nanoparticles of carvedilol: preparation and in vitro optimization using a two-level factorial design.

PubMed

Varshosaz, Jaleh; Moazen, Ellaheh

2014-08-01

Carvedilol used in cardiovascular diseases has systemic bioavailability of 25-35%. The objective of this study was production of lectin-modified poly(ethylene-co-vinyl acetate) (PEVA) as mucoadhesive nanoparticles to enhance low oral bioavailability of carvedilol. Nanoparticles were prepared by the emulsification-solvent evaporation method using a two-level factorial design. The studied variables included the vinyl acetate content of the polymer, drug and polymer content. Surface modification of PEVA nanoparticles with lectin was carried out by the adsorption method and coupling efficiency was determined using the Bradford assay. Mucoadhesion of nanoparticles was studied on mucin. The particle size, polydispersity index, zeta potential, drug loading and drug release from nanoparticles were studied. The morphology of nanoparticles and crystalline status of the entrapped drug were studied by SEM, DSC and XRD tests, respectively. Results showed the most effective factor on particle size and zeta potential was the interaction of polymer and drug content while, drug loading efficiency and mucoadhesion were more affected by the interaction of polymer type and drug content. Drug concentration was the most effective variable on the drug release rate. The drug was in amorphous state in nanoparticles. The optimum nanoparticles obtained by 45 mg of copolymer contained 12% vinyl acetate/4.3 ml of organic phase and drug concentration of 37.5 wt% of polymer.

Synergistic Effect of Hydrotrope and Surfactant on Solubility and Dissolution of Atorvastatin Calcium: Screening Factorial Design Followed by Ratio Optimization

PubMed Central

Patel, V. F.; Sarai, J.

2014-01-01

The present study was aimed at investigating the effect of hydrotrope and surfactant on poor solubility of atorvastatin calcium. Excipients screening followed by factorial design was performed to study effect of excipients and manufacturing methods on solubility of drug. Three independent factors (carrier, surfactant and manufacturing method) were evaluated at two levels using solubility as a dependant variable. Solid-state characterisation was performed using Fourier transform infrared spectroscopy and differential scanning calorimetry. Optimised complex were incorporated into orally disintegrating micro tablets and in vitro dissolution test was performed. Nicotinamide, Plasdone and sodium dodecyl sulphate were emerged as promising excipients from excipient screening. General regression analysis revealed only the type of carrier has significantly enhanced (P<0.05) the solubility of drug while other factors were found to be nonsignificant. Ratio optimisation trial revealed that drug to nicotinamide ratio is more critical in enhancing the solubility of drug (40 fold increases in solubility compared to pure drug) in comparison to drug-surfactant ratio; however the presence of surfactant deemed essential. Significantly higher rate and extent of dissolution was observed from solid dispersion complex and tablets compared to dissolution of pure drug (P<0.05). Study revealed hydrotrope and surfactant have synergistic effect on solubility and dissolution of atorvastatin calcium and this can be explored further. PMID:25593381

Sample Size Requirements and Study Duration for Testing Main Effects and Interactions in Completely Randomized Factorial Designs When Time to Event is the Outcome

PubMed Central

Moser, Barry Kurt; Halabi, Susan

2013-01-01

In this paper we develop the methodology for designing clinical trials with any factorial arrangement when the primary outcome is time to event. We provide a matrix formulation for calculating the sample size and study duration necessary to test any effect with a pre-specified type I error rate and power. Assuming that a time to event follows an exponential distribution, we describe the relationships between the effect size, the power, and the sample size. We present examples for illustration purposes. We provide a simulation study to verify the numerical calculations of the expected number of events and the duration of the trial. The change in the power produced by a reduced number of observations or by accruing no patients to certain factorial combinations is also described. PMID:25530661

Tamarind seed gum-hydrolyzed polymethacrylamide-g-gellan beads for extended release of diclofenac sodium using 32 full factorial design.

PubMed

Nandi, Gouranga; Nandi, Amit Kumar; Khan, Najim Sarif; Pal, Souvik; Dey, Sibasish

2018-07-15

Development of tamarind seed gum (TSG)-hydrolyzed polymethacrylamide-g-gellan (h-Pmaa-g-GG) composite beads for extended release of diclofenac sodium using 3 2 full factorial design is the main purpose of this study. The ratio of h-Pmaa-g-GG and TSG and concentration of cross-linker CaCl 2 were taken as independent factors with three different levels of each. Effects of polymer ratio and CaCl 2 on drug entrapment efficiency (DEE), drug release, bead size and swelling were investigated. Responses such as DEE and different drug release parameters were statistically analyzed by 3 2 full factorial design using Design-Expert software and finally the formulation factors were optimized to obtain USP-reference release profile. Drug release rate was found to decrease with decrease in the ratio of h-Pmaa-g-GG:TSG and increase in the concentration of Ca 2+ ions in cross-linking medium. The optimized formulation showed DEE of 93.25% and an extended drug release profile over a period of 10h with f 2 =80.13. Kinetic modeling unveiled case-I-Fickian diffusion based drug release mechanism. Copyright © 2018 Elsevier B.V. All rights reserved.

Factorial Design Approach in Proportioning Prestressed Self-Compacting Concrete.

PubMed

Long, Wu-Jian; Khayat, Kamal Henri; Lemieux, Guillaume; Xing, Feng; Wang, Wei-Lun

2015-03-13

In order to model the effect of mixture parameters and material properties on the hardened properties of, prestressed self-compacting concrete (SCC), and also to investigate the extensions of the statistical models, a factorial design was employed to identify the relative significance of these primary parameters and their interactions in terms of the mechanical and visco-elastic properties of SCC. In addition to the 16 fractional factorial mixtures evaluated in the modeled region of -1 to +1, eight axial mixtures were prepared at extreme values of -2 and +2 with the other variables maintained at the central points. Four replicate central mixtures were also evaluated. The effects of five mixture parameters, including binder type, binder content, dosage of viscosity-modifying admixture (VMA), water-cementitious material ratio (w/cm), and sand-to-total aggregate ratio (S/A) on compressive strength, modulus of elasticity, as well as autogenous and drying shrinkage are discussed. The applications of the models to better understand trade-offs between mixture parameters and carry out comparisons among various responses are also highlighted. A logical design approach would be to use the existing model to predict the optimal design, and then run selected tests to quantify the influence of the new binder on the model.

DKIST enclosure modeling and verification during factory assembly and testing

NASA Astrophysics Data System (ADS)

Larrakoetxea, Ibon; McBride, William; Marshall, Heather K.; Murga, Gaizka

2014-08-01

The Daniel K. Inouye Solar Telescope (DKIST, formerly the Advanced Technology Solar Telescope, ATST) is unique as, apart from protecting the telescope and its instrumentation from the weather, it holds the entrance aperture stop and is required to position it with millimeter-level accuracy. The compliance of the Enclosure design with the requirements, as of Final Design Review in January 2012, was supported by mathematical models and other analyses which included structural and mechanical analyses (FEA), control models, ventilation analysis (CFD), thermal models, reliability analysis, etc. During the Enclosure Factory Assembly and Testing the compliance with the requirements has been verified using the real hardware and the models created during the design phase have been revisited. The tests performed during shutter mechanism subsystem (crawler test stand) functional and endurance testing (completed summer 2013) and two comprehensive system-level factory acceptance testing campaigns (FAT#1 in December 2013 and FAT#2 in March 2014) included functional and performance tests on all mechanisms, off-normal mode tests, mechanism wobble tests, creation of the Enclosure pointing map, control system tests, and vibration tests. The comparison of the assumptions used during the design phase with the properties measured during the test campaign provides an interesting reference for future projects.

Optimizing the vacuum plasma spray deposition of metal, ceramic, and cermet coatings using designed experiments

NASA Astrophysics Data System (ADS)

Kingswell, R.; Scott, K. T.; Wassell, L. L.

1993-06-01

The vacuum plasma spray (VPS) deposition of metal, ceramic, and cermet coatings has been investigated using designed statistical experiments. Processing conditions that were considered likely to have a significant influence on the melting characteristics of the precursor powders and hence deposition efficiency were incorporated into full and fractional factorial experimental designs. The processing of an alumina powder was very sensitive to variations in the deposition conditions, particularly the injection velocity of the powder into the plasma flame, the plasma gas composition, and the power supplied to the gun. Using a combination of full and fractional factorial experimental designs, it was possible to rapidly identify the important spraying variables and adjust these to produce a deposition efficiency approaching 80 percent. The deposition of a nickel-base alloy metal powder was less sensitive to processing conditions. Generally, however, a high degree of particle melting was achieved for a wide range of spray conditions. Preliminary experiments performed using a tungsten carbide/cobalt cermet powder indicated that spray efficiency was not sensitive to deposition conditions. However, microstructural analysis revealed considerable variations in the degree of tungsten carbide dissolution. The structure and properties of the optimized coatings produced in the factorial experiments are also discussed.

Factorial experimental design intended for the optimization of the alumina purification conditions

NASA Astrophysics Data System (ADS)

Brahmi, Mounaouer; Ba, Mohamedou; Hidri, Yassine; Hassen, Abdennaceur

2018-04-01

The objective of this study was to determine the optimal conditions by using the experimental design methodology for the removal of some impurities associated with the alumina. So, three alumina qualities of different origins were investigated under the same conditions. The application of full-factorial designs on the samples of different qualities of alumina has followed the removal rates of the sodium oxide. However, a factorial experimental design was developed to describe the elimination of sodium oxide associated with the alumina. The experimental results showed that chemical analyze followed by XRF prior treatment of the samples, provided a primary idea concerning these prevailing impurities. Therefore, it appeared that the sodium oxide constituted the largest amount among all impurities. After the application of experimental design, analysis of the effectors different factors and their interactions showed that to have a better result, we should reduce the alumina quantity investigated and by against increase the stirring time for the first two samples, whereas, it was necessary to increase the alumina quantity in the case of the third sample. To expand and improve this research, we should take into account all existing impurities, since we found during this investigation that the levels of partial impurities increased after the treatment.

26 CFR 1.199-4 - Costs allocable to domestic production gross receipts.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... Use of standard cost method. X, a calendar year taxpayer, manufactures item A in a factory located in the United States and item B in a factory located in Country Y. Item A is produced by X within the... engaged in the trade or business of farming that is not required to use the accrual method of accounting...

26 CFR 1.199-4 - Costs allocable to domestic production gross receipts.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... Use of standard cost method. X, a calendar year taxpayer, manufactures item A in a factory located in the United States and item B in a factory located in Country Y. Item A is produced by X within the... engaged in the trade or business of farming that is not required to use the accrual method of accounting...

26 CFR 1.199-4 - Costs allocable to domestic production gross receipts.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... Use of standard cost method. X, a calendar year taxpayer, manufactures item A in a factory located in the United States and item B in a factory located in Country Y. Item A is produced by X within the... engaged in the trade or business of farming that is not required to use the accrual method of accounting...

The Shirts on Our Backs: Teleological Perspectives on Factory Safety in Bangladesh

ERIC Educational Resources Information Center

Dhooge, Lucien J.

2016-01-01

This case study addresses the issue of factory safety in the garment industry through an examination of two recent catastrophic failures in Bangladesh. The case study was designed for students in Business Ethics in the MBA curriculum at the Scheller College of Business at the Georgia Institute of Technology. The case study has also been adapted…

The Factorial Validity of The Maslach Burnout Inventory--General Survey in Representative Samples of Eight Different Occupational Groups

ERIC Educational Resources Information Center

Langballe, Ellen Melbye; Falkum, Erik; Innstrand, Siw Tone; Aasland, Olaf Gjerlow

2006-01-01

The Maslach Burnout Inventory--General Survey (MBI-GS) is designed to measure the three subdimensions (exhaustion, cynicism, and professional efficacy) of burnout in a wide range of occupations. This article examines the factorial validity of the MBI-GS across eight different occupational groups in Norway: lawyers, physicians, nurses, teachers,…

Economic evaluation of factorial randomised controlled trials: challenges, methods and recommendations

PubMed Central

Gray, Alastair

2017-01-01

Increasing numbers of economic evaluations are conducted alongside randomised controlled trials. Such studies include factorial trials, which randomise patients to different levels of two or more factors and can therefore evaluate the effect of multiple treatments alone and in combination. Factorial trials can provide increased statistical power or assess interactions between treatments, but raise additional challenges for trial‐based economic evaluations: interactions may occur more commonly for costs and quality‐adjusted life‐years (QALYs) than for clinical endpoints; economic endpoints raise challenges for transformation and regression analysis; and both factors must be considered simultaneously to assess which treatment combination represents best value for money. This article aims to examine issues associated with factorial trials that include assessment of costs and/or cost‐effectiveness, describe the methods that can be used to analyse such studies and make recommendations for health economists, statisticians and trialists. A hypothetical worked example is used to illustrate the challenges and demonstrate ways in which economic evaluations of factorial trials may be conducted, and how these methods affect the results and conclusions. Ignoring interactions introduces bias that could result in adopting a treatment that does not make best use of healthcare resources, while considering all interactions avoids bias but reduces statistical power. We also introduce the concept of the opportunity cost of ignoring interactions as a measure of the bias introduced by not taking account of all interactions. We conclude by offering recommendations for planning, analysing and reporting economic evaluations based on factorial trials, taking increased analysis costs into account. © 2017 The Authors. Statistics in Medicine published by John Wiley & Sons Ltd. PMID:28470760

A community-initiated study of blood lead levels of Nicaraguan children living near a battery factory.

PubMed Central

Morales Bonilla, C; Mauss, E A

1998-01-01

OBJECTIVES: In response to requests by parents in Managua, Nicaragua, whose neighborhood borders a battery factory, 97 children were tested for blood lead, as were 30 children in a neighborhood without an obvious source of environmental lead. METHODS: Venous blood was examined by atomic absorption spectrophotometry. Educational workshops were conducted. RESULTS: Mean blood lead levels were 17.21 +/- 9.92 micrograms/dL in the index children and 7.40 +/- 5.37 micrograms/dL in the controls (P < .001). CONCLUSIONS: Children living near the battery factory are at increased risk of lead poisoning. The parents were able to petition the government to control the factory emissions and to improve appropriate health services. The factory is now closed. PMID:9842385

Baby Factories in Nigeria: Starting the Discussion Toward a National Prevention Policy.

PubMed

Makinde, Olusesan Ayodeji; Olaleye, Olalekan; Makinde, Olufunmbi Olukemi; Huntley, Svetlana S; Brown, Brandon

2017-01-01

Baby factories and baby harvesting are relatively new terms that involve breeding, trafficking, and abuse of infants and their biological mothers. Since it was first described in a United Nations Educational, Scientific and Cultural Organization report in Nigeria in 2006, several more baby factories have been discovered over the years. Infertile women are noted to be major patrons of these baby factories due to the stigmatization of childless couples in Southern Nigeria and issues around cultural acceptability of surrogacy and adoption. These practices have contributed to the growth in the industry which results in physical, psychological, and sexual violence to the victims. Tackling baby factories will involve a multifaceted approach that includes advocacy and enacting of legislation barring baby factories and infant trafficking and harsh consequences for their patrons. Also, programs to educate young girls on preventing unwanted pregnancies are needed. Methods of improving awareness and acceptability of adoption and surrogacy and reducing the administrative and legal bottlenecks associated with these options for infertile couples should be explored to diminish the importance of baby factories. © The Author(s) 2015.

The 9-item Bergen Burnout Inventory: factorial validity across organizations and measurements of longitudinal data.

PubMed

Feldt, Taru; Rantanen, Johanna; Hyvönen, Katriina; Mäkikangas, Anne; Huhtala, Mari; Pihlajasaari, Pia; Kinnunen, Ulla

2014-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times.

Nanostructured lipid carriers as a potential vehicle for Carvedilol delivery: Application of factorial design approach.

PubMed

Patil, Ganesh B; Patil, Nandkishor D; Deshmukh, Prashant K; Patil, Pravin O; Bari, Sanjay B

2016-01-01

Present invention relates to design of nanostructured lipid carriers (NLC) to augment oral bioavailability of Carvedilol (CAR). In this attempt, formulations of CAR-NLCs were prepared with glyceryl-monostearate (GMS) as a lipid, poloxamer 188 as a surfactant and tween 80 as a co-surfactant using high pressure homogenizer by 2(3) factorial design approach. Formed CAR-NLCs were assessed for various performance parameters. Accelerated stability studies demonstrated negligible change in particle size and entrapment efficiency, after storage at specified time up to 3 months. The promising findings in this investigation suggest the practicability of these systems for enhancement of bioavailability of drugs like CAR.

Smart factory in the context of 4th industrial revolution: challenges and opportunities for Romania

NASA Astrophysics Data System (ADS)

Pîrvu, B. C.; Zamfirescu, C. B.

2017-08-01

Manufacturing companies, independent of operation sector and size, must be able to produce lot size one products, just-in-time at a competitive cost. Coping with this high adaptability and short reaction times proves to be very challenging. New approaches must be taken into consideration for designing modular, intelligent and cooperative production systems which are easy to integrate with the entire factory. The coined term for this network of intelligent interacting artefacts system is cyber-physical systems (CPS). CPS is often used in the context of Industry 4.0 - or what many consider the forth industrial revolution. The paper presents an overview of key technological and social requirements to map the Smart Factory vision into reality. Finally, global and Romanian specific challenges hindering the vision of a true Smart Factory to become reality are presented.

Development and Optimization of Dispersible Tablet of Bacopa monnieri with Improved Functionality for Memory Enhancement.

PubMed

Thakkar, Vaishali Tejas; Deshmukh, Amol; Hingorani, Lal; Juneja, Payal; Baldaniya, Lalji; Patel, Asha; Pandya, Tosha; Gohel, Mukesh

2017-01-01

The Bacopa monnieri is traditional Ayurvedic medicine, and reported for memory-enhancing effects. The Bacoside is poorly soluble, bitter in taste and responsible for the memory enhancement action. Memory enhancer is commonly prescribed for children or elder people. Poor solubility, patient compliance and bitterness were a major driving force to develop taste masked β-cyclodextrin complex and dispersible tablets. The inclusion complex of Bacopa monnieri and β-cyclodextrin was prepared in different molar ratios of Bacopa monnieri by Co-precipitation method. Phase solubility study was conducted to evaluate the effect of β-cyclodextrin on aqueous solubility of Bacoside A. The characterization was determined by Fourier transformation infrared spectroscopy (FTIR),Differential scanning calorimetry (DSC) and X-ray diffraction study (XRD).Crospovidone and croscarmallose sodium were used as super disintigrant. The 3 2 full factorial design was adopted to investigate the influence of two superdisintegrants on the wetting time and disntegration time of the tablets. The result revels that molar ratio (1:4) of inclusion complex enhance 3-fold solubility. Full factorial design was successfully employed for the optimization of dispersible tablet of B. monnieri . The short-term accelerated stability study confirmed that high stability of B. monnieri in inclusion complex.

A reusability and efficiency oriented software design method for mobile land inspection

NASA Astrophysics Data System (ADS)

Cai, Wenwen; He, Jun; Wang, Qing

2008-10-01

Aiming at the requirement from the real-time land inspection domain, a land inspection handset system was presented in this paper. In order to increase the reusability of the system, a design pattern based framework was presented. Encapsulation for command like actions by applying COMMAND pattern was proposed for the problem of complex UI interactions. Integrating several GPS-log parsing engines into a general parsing framework was archived by introducing STRATEGY pattern. A network transmission module based network middleware was constructed. For mitigating the high coupling of complex network communication programs, FACTORY pattern was applied to facilitate the decoupling. Moreover, in order to efficiently manipulate huge GIS datasets, a VISITOR pattern and Quad-tree based multi-scale representation method was presented. It had been proved practically that these design patterns reduced the coupling between the subsystems, and improved the expansibility.

Feasibility study tool for semi-rigid joints design of high-rise buildings steel structures

NASA Astrophysics Data System (ADS)

Bagautdinov, Ruslan; Monastireva, Daria; Bodak, Irina; Potapova, Irina

2018-03-01

There are many ways to consider the final cost of the high-rise building structures and to define, which of their different variations are the most effective from different points of view. The research of Jaakko Haapio is conducted in Tampere University of Technology, which aims to develop a method that allows determining the manufacturing and installation costs of steel structures already at the tender phase while taking into account their details. This paper is aimed to make the analysis of the Feature-Based Costing Method for skeletal steel structures proposed by Jaakko Haapio. The most appropriate ways to improve the tool and to implement it in the Russian circumstances for high-rise building design are derived. Presented tool can be useful not only for the designers but, also, for the steel structures manufacturing organizations, which can help to utilize BIM technologies in the organization process and controlling on the factory.

Quality-by-design-based ultra high performance liquid chromatography related substances method development by establishing the proficient design space for sumatriptan and naproxen combination.

PubMed

Patel, Prinesh N; Karakam, Vijaya Saradhi; Samanthula, Gananadhamu; Ragampeta, Srinivas

2015-10-01

Quality-by-design-based methods hold greater level of confidence for variations and greater success in method transfer. A quality-by-design-based ultra high performance liquid chromatography method was developed for the simultaneous assay of sumatriptan and naproxen along with their related substances. The first screening was performed by fractional factorial design comprising 44 experiments for reversed-phase stationary phases, pH, and organic modifiers. The results of screening design experiments suggested phenyl hexyl column and acetonitrile were the best combination. The method was further optimized for flow rate, temperature, and gradient time by experimental design of 20 experiments and the knowledge space was generated for effect of variable on response (number of peaks ≥ 1.50 - resolution). Proficient design space was generated from knowledge space by applying Monte Carlo simulation to successfully integrate quantitative robustness metrics during optimization stage itself. The final method provided the robust performance which was verified and validated. Final conditions comprised Waters® Acquity phenyl hexyl column with gradient elution using ammonium acetate (pH 4.12, 0.02 M) buffer and acetonitrile at 0.355 mL/min flow rate and 30°C. The developed method separates all 13 analytes within a 15 min run time with fewer experiments compared to the traditional quality-by-testing approach. ©2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Trace element analysis of coal by neutron activation.

NASA Technical Reports Server (NTRS)

Sheibley, D. W.

1973-01-01

The irradiation, counting, and data reduction scheme is described for an analysis capability of 1000 samples per year. Up to 56 elements are reported on each sample. The precision and accuracy of the method are shown for 25 elements designated as hazardous by the Environmental Protection Agency (EPA). The interference corrections for selenium and ytterbium on mercury and ytterbium on selenium are described. The effect of bromine and antimony on the determination of arsenic is also mentioned. The use of factorial design techniques to evaluate interferences in the determination of mercury, selenium, and arsenic is shown. Some typical trace element results for coal, fly ash, and bottom ash are given.

Trace element analysis of coal by neutron activation

NASA Technical Reports Server (NTRS)

Sheibley, D. W.

1973-01-01

The irradiation, counting, and data reduction scheme is described for an analysis capability of 1000 samples per year. Up to 56 elements are reported on each sample. The precision and accuracy of the method are shown for 25 elements designated as hazardous by the Environmental Protection Agency (EPA). The interference corrections for selenium and ytterbium on mercury and ytterbium on selenium are described. The effect of bromine and antimony on the determination of arsenic is also mentioned. The use of factorial design techniques to evaluate interferences in the determination of mercury, selenium, and arsenic is shown. Some typical trace element results for coal, fly ash, and bottom ash are given.

Determination of tailored filter sets to create rayfiles including spatial and angular resolved spectral information.

PubMed

Rotscholl, Ingo; Trampert, Klaus; Krüger, Udo; Perner, Martin; Schmidt, Franz; Neumann, Cornelius

2015-11-16

To simulate and optimize optical designs regarding perceived color and homogeneity in commercial ray tracing software, realistic light source models are needed. Spectral rayfiles provide angular and spatial varying spectral information. We propose a spectral reconstruction method with a minimum of time consuming goniophotometric near field measurements with optical filters for the purpose of creating spectral rayfiles. Our discussion focuses on the selection of the ideal optical filter combination for any arbitrary spectrum out of a given filter set by considering measurement uncertainties with Monte Carlo simulations. We minimize the simulation time by a preselection of all filter combinations, which bases on factorial design.

Teaching fractional factorial experiments via course delegate designed experiments.

PubMed

Coleman, S; Antony, J

1999-01-01

Industrial experiments are fundamental in enhancing the understanding and knowledge of a process and product behavior. Designed industrial experiments assist people in understanding, investigating, and improving their processes. The purpose of a designed experiment is to understand which factors might influence the process output and then to determine those factor settings that optimize the process output. Teaching "design of experiments" using textbook examples does not fully shed light on how to identify and formulate the problem, identify factors, and determine the performance of the physical experiment. Presented here is an example of how to teach fractional factorial experiments in a course on designed experiments. Also presented is a practical, hands-on experiment that has been found to be extremely successful in instilling confidence and motivation in course delegates. The experiment provides a great stimulus to the delegates for the application of experimental design in their own work environment.

Bacteriophages and dairy fermentations

PubMed Central

Marcó, Mariángeles Briggiler; Moineau, Sylvain; Quiberoni, Andrea

2012-01-01

This review highlights the main strategies available to control phage infection during large-scale milk fermentation by lactic acid bacteria. The topics that are emphasized include the factors influencing bacterial activities, the sources of phage contamination, the methods available to detect and quantify phages, as well as practical solutions to limit phage dispersion through an adapted factory design, the control of air flow, the use of adequate sanitizers, the restricted used of recycled products, and the selection and growth of bacterial cultures. PMID:23275866

The Role of Spatial Analysis in Detecting the Consequence of the Factory Sites : Case Study of Assalaya Factory-Sudan

NASA Astrophysics Data System (ADS)

Khair, Amar Sharaf Eldin; Purwanto; RyaSunoko, Henna; Abdullah, Omer Adam

2018-02-01

Spatial analysis is considered as one of the most important science for identifying the most appropriate site for industrialization and also to alleviate the environmental ramifications caused by factories. This study aims at analyzing the Assalaya sugarcane factory site by the use of spatial analysis to determine whether it has ramification on the White Nile River. The methodology employed for this study is Global Position System (GPS) to identify the coordinate system of the study phenomena and other relative factors. The study will also make use Geographical Information System (GIS) to implement the spatial analysis. Satellite data (LandsatDem-Digital Elevation Model) will be considered for the study area and factory in identifying the consequences by analyzing the location of the factory through several features such as hydrological, contour line and geological analysis. Data analysis reveals that the factory site is inappropriate and according to observation on the ground it has consequences on the White Nile River. Based on the finding, the study recommended some suggestions to avoid the aftermath of any factory in general. We have to take advantage of this new technological method to aid in selecting most apt locations for industries that will create an ambient environment.

Modeling and multi-response optimization of pervaporation of organic aqueous solutions using desirability function approach.

PubMed

Cojocaru, C; Khayet, M; Zakrzewska-Trznadel, G; Jaworska, A

2009-08-15

The factorial design of experiments and desirability function approach has been applied for multi-response optimization in pervaporation separation process. Two organic aqueous solutions were considered as model mixtures, water/acetonitrile and water/ethanol mixtures. Two responses have been employed in multi-response optimization of pervaporation, total permeate flux and organic selectivity. The effects of three experimental factors (feed temperature, initial concentration of organic compound in feed solution, and downstream pressure) on the pervaporation responses have been investigated. The experiments were performed according to a 2(3) full factorial experimental design. The factorial models have been obtained from experimental design and validated statistically by analysis of variance (ANOVA). The spatial representations of the response functions were drawn together with the corresponding contour line plots. Factorial models have been used to develop the overall desirability function. In addition, the overlap contour plots were presented to identify the desirability zone and to determine the optimum point. The optimal operating conditions were found to be, in the case of water/acetonitrile mixture, a feed temperature of 55 degrees C, an initial concentration of 6.58% and a downstream pressure of 13.99 kPa, while for water/ethanol mixture a feed temperature of 55 degrees C, an initial concentration of 4.53% and a downstream pressure of 9.57 kPa. Under such optimum conditions it was observed experimentally an improvement of both the total permeate flux and selectivity.

Reframed Genome-Scale Metabolic Model to Facilitate Genetic Design and Integration with Expression Data.

PubMed

Gu, Deqing; Jian, Xingxing; Zhang, Cheng; Hua, Qiang

2017-01-01

Genome-scale metabolic network models (GEMs) have played important roles in the design of genetically engineered strains and helped biologists to decipher metabolism. However, due to the complex gene-reaction relationships that exist in model systems, most algorithms have limited capabilities with respect to directly predicting accurate genetic design for metabolic engineering. In particular, methods that predict reaction knockout strategies leading to overproduction are often impractical in terms of gene manipulations. Recently, we proposed a method named logical transformation of model (LTM) to simplify the gene-reaction associations by introducing intermediate pseudo reactions, which makes it possible to generate genetic design. Here, we propose an alternative method to relieve researchers from deciphering complex gene-reactions by adding pseudo gene controlling reactions. In comparison to LTM, this new method introduces fewer pseudo reactions and generates a much smaller model system named as gModel. We showed that gModel allows two seldom reported applications: identification of minimal genomes and design of minimal cell factories within a modified OptKnock framework. In addition, gModel could be used to integrate expression data directly and improve the performance of the E-Fmin method for predicting fluxes. In conclusion, the model transformation procedure will facilitate genetic research based on GEMs, extending their applications.

Determination of oleamide and erucamide in polyethylene films by pressurised fluid extraction and gas chromatography.

PubMed

Garrido-López, Alvaro; Esquiu, Vanesa; Tena, María Teresa

2006-08-18

A pressurized fluid extraction (PFE) and gas chromatography-flame ionization detection (GC-FID) method is proposed to determine the slip agents in polyethylene (PE) films. The study of PFE variables was performed using a fractional factorial design (FFD) for screening and a central composite design (CCD) for optimizing the main variables obtained from the Pareto charts. The variables that were studied include temperature, static time, percentage of cyclohexane and the number of extraction cycles. The final condition selected was pure isopropanol (two times) at 105 degrees C for 16min. The recovery of spiked oleamide and erucamide was around 100%. The repeatability of the method was between 9.6% for oleamide and 8% for erucamide, expressed as relative standard deviation. Finally, the method was applied to determine oleamide and erucamide in several polyethylene films and the results were statistically equal to those obtained by pyrolysis and gas-phase chemiluminescence (CL).

Optimization of acidic extraction of astaxanthin from Phaffia rhodozyma *

PubMed Central

Ni, Hui; Chen, Qi-he; He, Guo-qing; Wu, Guang-bin; Yang, Yuan-fan

2008-01-01

Optimization of a process for extracting astaxanthin from Phaffia rhodozyma by acidic method was investigated, regarding several extraction factors such as acids, organic solvents, temperature and time. Fractional factorial design, central composite design and response surface methodology were used to derive a statistically optimal model, which corresponded to the following optimal condition: concentration of lactic acid at 5.55 mol/L, ratio of ethanol to yeast dry weight at 20.25 ml/g, temperature for cell-disruption at 30 °C, and extraction time for 3 min. Under this condition, astaxanthin and the total carotenoids could be extracted in amounts of 1294.7 μg/g and 1516.0 μg/g, respectively. This acidic method has advantages such as high extraction efficiency, low chemical toxicity and no special requirement of instruments. Therefore, it might be a more feasible and practical method for industrial practice. PMID:18196613

Men's Preferences for Physical Activity Interventions: An Exploratory Study Using a Factorial Survey Design Created With R Software.

PubMed

Chatfield, Sheryl L; Gamble, Abigail; Hallam, Jeffrey S

2018-03-01

Effective exercise interventions are needed to improve quality of life and decrease the impact of chronic disease. Researchers suggest males have been underrepresented in exercise intervention studies, resulting in less understanding of their exercise practices. Findings from preference survey methods suggest reasonable association between preference and behavior. The purpose of the research described in this article was to use factorial survey, a preference method, to identify the characteristics of exercise interventions most likely to appeal to male participants, so preferences might be incorporated into future intervention research. The research was guided by the framework of Bandura's social cognitive theory, such that variations in individual, environmental, and behavioral factors were incorporated into vignettes. Participants included 53 adult male nonadministrative staff and contract employees at a public university in the Southeastern United States, who each scored 8 vignettes resulting in 423 observations. Multilevel models were used to assess the influence of the factors. Participants scored vignettes that included exercising with a single partner, playing basketball, and exercising in the evening higher than vignettes with other options. Qualitative analysis of an open response item identified additional alternatives in group size, participant desire for coaching support, and interest in programs that incorporate a range of activity alternatives. Findings from this research were consistent with elements of social cognitive theory as applied to health promotion. Factorial surveys potentially provide a resource effective means of identifying participants' preferences for use when planning interventions. The addition of a single qualitative item helped clarify and expand findings from statistical analysis.

Ubiquitous Robotic Technology for Smart Manufacturing System.

PubMed

Wang, Wenshan; Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

2016-01-01

As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods.

Ubiquitous Robotic Technology for Smart Manufacturing System

PubMed Central

Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

2016-01-01

As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods. PMID:27446206

A Survey of the Medical Needs of a Group of Small Factories*

PubMed Central

Lee, W. R.

1962-01-01

The present interest in medical services for small factories is matched by the limited objective information which is available on the demand for and needs of such services. As a teaching project, a survey was made of factories with between 30 and 200 employees on an estate in the North West where there was no organized medical service. Unfortunately, time allowed only 22 factories to be visited. The findings, therefore, are regarded as indicative rather than conclusive, but this does not detract from their interest. Factories were visited by two or three postgraduate students who completed a questionnaire designed to standardize their findings. The questionnaire is included as an appendix to this paper. Regarding the demand for medical services, four of the 22 factories were subsidiaries of larger organizations and had part-time medical advice, 14 expressed no interest even if this would have involved no financial commitment, and the remaining four were interested for differing reasons. The needs of the factories in this context were found to be, first, advice and perhaps better supervision of non-mechanical hazards and, secondly, supervision of the first aid arrangements. From the ambulance journey records of the local authority there appeared to be no great demand for local casualty facilities. To meet these needs it is suggested that the functions of the appointed factory doctor might be modified to include wider supervision of non-mechanical hazards and supervision of first aid arrangements. It is also suggested that the National Health Service should form the basis for dealing with those cases requiring more than first aid. PMID:14463582

Methodology on Investigating the Influences of Automated Material Handling System in Automotive Assembly Process

NASA Astrophysics Data System (ADS)

Saffar, Seha; Azni Jafar, Fairul; Jamaludin, Zamberi

2016-02-01

A case study was selected as a method to collect data in actual industry situation. The study aimed to assess the influences of automated material handling system in automotive industry by proposing a new design of integration system through simulation, and analyze the significant effect and influence of the system. The method approach tool will be CAD Software (Delmia & Quest). The process of preliminary data gathering in phase 1 will collect all data related from actual industry situation. It is expected to produce a guideline and limitation in designing a new integration system later. In phase 2, an idea or concept of design will be done by using 10 principles of design consideration for manufacturing. A full factorial design will be used as design of experiment in order to analyze the performance measured of the integration system with the current system in case study. From the result of the experiment, an ANOVA analysis will be done to study the performance measured. Thus, it is expected that influences can be seen from the improvement made in the system.

Industrial systems biology and its impact on synthetic biology of yeast cell factories.

PubMed

Fletcher, Eugene; Krivoruchko, Anastasia; Nielsen, Jens

2016-06-01

Engineering industrial cell factories to effectively yield a desired product while dealing with industrially relevant stresses is usually the most challenging step in the development of industrial production of chemicals using microbial fermentation processes. Using synthetic biology tools, microbial cell factories such as Saccharomyces cerevisiae can be engineered to express synthetic pathways for the production of fuels, biopharmaceuticals, fragrances, and food flavors. However, directing fluxes through these synthetic pathways towards the desired product can be demanding due to complex regulation or poor gene expression. Systems biology, which applies computational tools and mathematical modeling to understand complex biological networks, can be used to guide synthetic biology design. Here, we present our perspective on how systems biology can impact synthetic biology towards the goal of developing improved yeast cell factories. Biotechnol. Bioeng. 2016;113: 1164-1170. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Study protocol for a cluster randomised controlled factorial design trial to assess the effectiveness and feasibility of reactive focal mass drug administration and vector control to reduce malaria transmission in the low endemic setting of Namibia.

PubMed

Medzihradsky, Oliver F; Kleinschmidt, Immo; Mumbengegwi, Davis; Roberts, Kathryn W; McCreesh, Patrick; Dufour, Mi-Suk Kang; Uusiku, Petrina; Katokele, Stark; Bennett, Adam; Smith, Jennifer; Sturrock, Hugh; Prach, Lisa M; Ntuku, Henry; Tambo, Munyaradzi; Didier, Bradley; Greenhouse, Bryan; Gani, Zaahira; Aerts, Ann; Gosling, Roly; Hsiang, Michelle S

2018-01-27

To interrupt malaria transmission, strategies must target the parasite reservoir in both humans and mosquitos. Testing of community members linked to an index case, termed reactive case detection (RACD), is commonly implemented in low transmission areas, though its impact may be limited by the sensitivity of current diagnostics. Indoor residual spraying (IRS) before malaria season is a cornerstone of vector control efforts. Despite their implementation in Namibia, a country approaching elimination, these methods have been met with recent plateaus in transmission reduction. This study evaluates the effectiveness and feasibility of two new targeted strategies, reactive focal mass drug administration (rfMDA) and reactive focal vector control (RAVC) in Namibia. This is an open-label cluster randomised controlled trial with 2×2 factorial design. The interventions include: rfMDA (presumptive treatment with artemether-lumefantrine (AL)) versus RACD (rapid diagnostic testing and treatment using AL) and RAVC (IRS with Acellic 300CS) versus no RAVC. Factorial design also enables comparison of the combined rfMDA+RAVC intervention to RACD. Participants living in 56 enumeration areas will be randomised to one of four arms: rfMDA, rfMDA+RAVC, RACD or RACD+RAVC. These interventions, triggered by index cases detected at health facilities, will be targeted to individuals residing within 500 m of an index. The primary outcome is cumulative incidence of locally acquired malaria detected at health facilities over 1 year. Secondary outcomes include seroprevalence, infection prevalence, intervention coverage, safety, acceptability, adherence, cost and cost-effectiveness. Findings will be reported on clinicaltrials.gov, in peer-reviewed publications and through stakeholder meetings with MoHSS and community leaders in Namibia. NCT02610400; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Sensitive quantitation of polyamines in plant foods by ultrasound-assisted benzoylation and dispersive liquid-liquid microextraction with the aid of experimental designs.

PubMed

Pinto, Edgar; Melo, Armindo; Ferreira, Isabel M P L V O

2014-05-14

A new method involving ultrasound-assisted benzoylation and dispersive liquid-liquid microextraction was optimized with the aid of chemometrics for the extraction, cleanup, and determination of polyamines in plant foods. Putrescine, cadaverine, spermidine, and spermine were derivatized with 3,5-dinitrobenzoyl chloride and extracted by dispersive liquid-liquid microextraction using acetonitrile and carbon tetrachloride as dispersive and extraction solvents, respectively. Two-level full factorial design and central composite design were applied to select the most appropriate derivatization and extraction conditions. The developed method was linear in the 0.5-10.0 mg/L range, with a R(2) ≥ 0.9989. Intra- and interday precisions ranged from 0.8 to 6.9% and from 3.0 to 10.3%, respectively, and the limit of detection ranged between 0.018 and 0.042 μg/g of fresh weight. This method was applied to the analyses of six different types of plant foods, presenting recoveries between 81.7 and 114.2%. The method is inexpensive, versatile, simple, and sensitive.

Patient-Specific B-Cell Antibody Factories to Treat Metastatic Disease

DTIC Science & Technology

2013-08-01

Immortalization of these selected clones using Epstein - Barr viral transformation provides a method to maintain these antibody producing cell lines as a...2013 Please see next page. None provided. Patient-Specific B-Cell Antibody Factories to Treat Metastatic Disease Kevin Claffey University of

Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas

PubMed Central

Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

2015-01-01

Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area. PMID:26580644

Tracing the contamination origin of coliform bacteria in two small food-processing factories.

PubMed

Tominaga, Tatsuya; Sekine, Masahiro; Oyaizu, Hiroshi

2008-09-01

The objective of this study was to trace contamination sources of coliform bacteria by comparing the types of coliforms between food samples and the processing environments in two small food-processing factories (factories A and B). Fermentation tests of five sugars enabled the successful classification of 16 representative type strains into eight distinct groups. The grouping procedure was then applied to comparison of the coliform flora between food products and various locations in their processing environments. The consistency between each food and the tested locations was evaluated using the Jaccard index. The air conditioner and refrigeration room floor in factory A showed an index of 1.00, while the shaping machine in factory B showed an index of 0.98, indicating that these locations could be contamination sources. The validity of our results was confirmed by randomly amplified polymorphic DNA, which showed 100% matched profiles between the air conditioner and the food in factory A, and highly matched profiles between the machine and the food in factory B. This method for comparing the coliform flora between food and environments has the potential to be a reliable tracing tool for various food industries.

Factorial Design Approach in Proportioning Prestressed Self-Compacting Concrete

PubMed Central

Long, Wu-Jian; Khayat, Kamal Henri; Lemieux, Guillaume; Xing, Feng; Wang, Wei-Lun

2015-01-01

In order to model the effect of mixture parameters and material properties on the hardened properties of, prestressed self-compacting concrete (SCC), and also to investigate the extensions of the statistical models, a factorial design was employed to identify the relative significance of these primary parameters and their interactions in terms of the mechanical and visco-elastic properties of SCC. In addition to the 16 fractional factorial mixtures evaluated in the modeled region of −1 to +1, eight axial mixtures were prepared at extreme values of −2 and +2 with the other variables maintained at the central points. Four replicate central mixtures were also evaluated. The effects of five mixture parameters, including binder type, binder content, dosage of viscosity-modifying admixture (VMA), water-cementitious material ratio (w/cm), and sand-to-total aggregate ratio (S/A) on compressive strength, modulus of elasticity, as well as autogenous and drying shrinkage are discussed. The applications of the models to better understand trade-offs between mixture parameters and carry out comparisons among various responses are also highlighted. A logical design approach would be to use the existing model to predict the optimal design, and then run selected tests to quantify the influence of the new binder on the model. PMID:28787990

Double jeopardy in inferring cognitive processes

PubMed Central

Fific, Mario

2014-01-01

Inferences we make about underlying cognitive processes can be jeopardized in two ways due to problematic forms of aggregation. First, averaging across individuals is typically considered a very useful tool for removing random variability. The threat is that averaging across subjects leads to averaging across different cognitive strategies, thus harming our inferences. The second threat comes from the construction of inadequate research designs possessing a low diagnostic accuracy of cognitive processes. For that reason we introduced the systems factorial technology (SFT), which has primarily been designed to make inferences about underlying processing order (serial, parallel, coactive), stopping rule (terminating, exhaustive), and process dependency. SFT proposes that the minimal research design complexity to learn about n number of cognitive processes should be equal to 2n. In addition, SFT proposes that (a) each cognitive process should be controlled by a separate experimental factor, and (b) The saliency levels of all factors should be combined in a full factorial design. In the current study, the author cross combined the levels of jeopardies in a 2 × 2 analysis, leading to four different analysis conditions. The results indicate a decline in the diagnostic accuracy of inferences made about cognitive processes due to the presence of each jeopardy in isolation and when combined. The results warrant the development of more individual subject analyses and the utilization of full-factorial (SFT) experimental designs. PMID:25374545

Advanced Envelope Research for Factory Built Housing, Phase 3. Design Development and Prototyping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Kessler, B.; Mullens, M.

2014-01-01

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet themore » thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research -- stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.« less

Advanced Envelope Research for Factory Built Housing, Phase 3 -- Design Development and Prototyping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Kessler, B.; Mullens, M.

2014-01-01

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet themore » thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research -- stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.« less

Screening of Actinomycetes from mangrove ecosystem for L-asparaginase activity and optimization by response surface methodology.

PubMed

Usha, Rajamanickam; Mala, Krishnaswami Kanjana; Venil, Chidambaram Kulandaisamy; Palaniswamy, Muthusamy

2011-01-01

Marine actinomycetes were isolated from sediment samples collected from Pitchavaram mangrove ecosystem situated along the southeast coast of India. Maximum actinomycete population was noted in rhizosphere region. About 38% of the isolates produced L-asparaginase. One potential strain KUA106 produced higher level of enzyme using tryptone glucose yeast extract medium. Based on the studied phenotypic characteristics, strain KUA106 was identified as Streptomyces parvulus KUA106. The optimization method that combines the Plackett-Burman design, a factorial design and the response surface method, which were used to optimize the medium for the production of L-asparaginase by Streptomycetes parvulus. Four medium factors were screened from eleven medium factors by Plackett-Burman design experiments and subsequent optimization process to find out the optimum values of the selected parameters using central composite design was performed. Asparagine, tryptone, d) extrose and NaCl components were found to be the best medium for the L-asparaginase production. The combined optimization method described here is the effective method for screening medium factors as well as determining their optimum level for the production of L-asparaginase by Streptomycetes parvulus KUAP106.

New generation electron-positron factories

NASA Astrophysics Data System (ADS)

Zobov, Mikhail

2011-09-01

In 2010 we celebrate 50 years since commissioning of the first particle storage ring ADA in Frascati (Italy) that also became the first electron-positron collider in 1964. After that date the particle colliders have increased their intensity, luminosity and energy by several orders of magnitude. Namely, because of the high stored beam currents and high rate of useful physics events (luminosity) the modern electron-positron colliders are called "factories". However, the fundamental physics has required luminosities by 1-2 orders of magnitudes higher with respect to those presently achieved. This task can be accomplished by designing a new generation of factories exploiting the potential of a new collision scheme based on the Crab Waist (CW) collision concept recently proposed and successfully tested at Frascati. In this paper we discuss the performance and limitations of the present generation electron-positron factories and give a brief overview of new ideas and collision schemes proposed for further collider luminosity increase. In more detail we describe the CW collision concept and the results of the crab waist collision tests in DAϕNE, the Italian ϕ-factory. Finally, we briefly describe most advanced projects of the next generation factories based on the CW concept: SuperB in Italy, SuperKEKB in Japan and SuperC-Tau in Russia.

The 9-item Bergen Burnout Inventory: Factorial Validity Across Organizations and Measurements of Longitudinal Data

PubMed Central

Feldt, Taru; RANTANEN, Johanna; HYVÖNEN, Katriina; MÄKIKANGAS, Anne; HUHTALA, Mari; PIHLAJASAARI, Pia; KINNUNEN, Ulla

2013-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9)1). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times. PMID:24366535

Automated production of plant-based vaccines and pharmaceuticals.

PubMed

Wirz, Holger; Sauer-Budge, Alexis F; Briggs, John; Sharpe, Aaron; Shu, Sudong; Sharon, Andre

2012-12-01

A fully automated "factory" was developed that uses tobacco plants to produce large quantities of vaccines and other therapeutic biologics within weeks. This first-of-a-kind factory takes advantage of a plant viral vector technology to produce specific proteins within the leaves of rapidly growing plant biomass. The factory's custom-designed robotic machines plant seeds, nurture the growing plants, introduce a viral vector that directs the plant to produce a target protein, and harvest the biomass once the target protein has accumulated in the plants-all in compliance with Food and Drug Administration (FDA) guidelines (e.g., current Good Manufacturing Practices). The factory was designed to be time, cost, and space efficient. The plants are grown in custom multiplant trays. Robots ride up and down a track, servicing the plants and delivering the trays from the lighted, irrigated growth modules to each processing station as needed. Using preprogrammed robots and processing equipment eliminates the need for human contact, preventing potential contamination of the process and economizing the operation. To quickly produce large quantities of protein-based medicines, we transformed a laboratory-based biological process and scaled it into an industrial process. This enables quick, safe, and cost-effective vaccine production that would be required in case of a pandemic.

Advanced continuous cultivation methods for systems microbiology.

PubMed

Adamberg, Kaarel; Valgepea, Kaspar; Vilu, Raivo

2015-09-01

Increasing the throughput of systems biology-based experimental characterization of in silico-designed strains has great potential for accelerating the development of cell factories. For this, analysis of metabolism in the steady state is essential as only this enables the unequivocal definition of the physiological state of cells, which is needed for the complete description and in silico reconstruction of their phenotypes. In this review, we show that for a systems microbiology approach, high-resolution characterization of metabolism in the steady state--growth space analysis (GSA)--can be achieved by using advanced continuous cultivation methods termed changestats. In changestats, an environmental parameter is continuously changed at a constant rate within one experiment whilst maintaining cells in the physiological steady state similar to chemostats. This increases the resolution and throughput of GSA compared with chemostats, and, moreover, enables following of the dynamics of metabolism and detection of metabolic switch-points and optimal growth conditions. We also describe the concept, challenge and necessary criteria of the systematic analysis of steady-state metabolism. Finally, we propose that such systematic characterization of the steady-state growth space of cells using changestats has value not only for fundamental studies of metabolism, but also for systems biology-based metabolic engineering of cell factories.

Gynecologic pain related to occupational stress among female factory workers in Tianjin, China

PubMed Central

Sznajder, Kristin K; Harlow, Siobán D; Burgard, Sarah A; Wang, Yanrang; Han, Cheng; Liu, Jing

2014-01-01

Background: Dysmenorrhea, dyspareunia, and non-cyclic pelvic pain are health concerns for factory workers in China and may be increased by occupational stress. Objectives: To estimate the prevalence and demographic and occupational factors associated with three types of gynecologic pain among female factory workers in Tianjin. Methods: The study included 651 female workers from three factories in Tianjin, China. Logistic regression models were estimated to determine associations between occupational stress and gynecologic pain. Results: Occupational stress including high job strain, exhaustion, and stress related to working conditions was a risk factor for gynecologic pain. High job strain and poor job security were associated with an increased risk for dysmenorrhea. Compulsory overtime and exhaustion were associated with increased non-cyclic pelvic pain. Working overtime and exhaustion were associated with increased dyspareunia. Conclusions: As China’s population of female factory workers grows, research on the reproductive health of this population is essential. PMID:24804338

The landing of field mosquitoes on permethrin-treated military uniforms in queensland, australia.

PubMed

Frances, S P; Mackenzie, D O; Sferopoulos, R; Lee, Bin

2014-12-01

A study to evaluate the protection provided by permethrin-treated military fabric following cold-water washing against host-seeking mosquitoes is reported. The landing/probing of native mosquitoes on Australian Defence Force Disruptive Pattern Combat Uniform shirts treated by dipping in 0.6% permethrin emulsion (Perigen Defence®, containing 500 g/l permethrin), and commercial factory treatments in the USA (Factory A) and Europe (Factory B) were recorded after 0, 1, 3, 5, and 10 washes. The study showed that significantly shorter landing/probing times compared with untreated controls were recorded for shirts treated with Factory A treatment after 0 and 1 wash, and for the Factory B treatment after 0 washes, and there were no differences between permethrin treatment and control landing. The study concludes that better methods to assess protection from landing/probing mosquitoes in the field are needed.

Arcnet(R) On-Fiber -- A Viable Factory Automation Alternative

NASA Astrophysics Data System (ADS)

Karlin, Geof; Tucker, Carol S.

1987-01-01

Manufacturers need to improve their operating methods and increase their productivity so they can compete successfully in the marketplace. This goal can be achieved through factory automation, and the key to this automation is successful data base management and factory integration. However, large scale factory automation and integration requires effective communications, and this has given rise to an interest in various Local Area Networks or LANs. In a completely integrated and automated factory, the entire organization must have access to the data base, and all departments and functions must be able to communicate with each other. Traditionally, these departments and functions use incompatible equipment, and the ability to make such equipment communicate presents numerous problems. ARCNET, a token-passing LAN which has a significant presence in the office environment today, coupled with fiber optic cable, the cable of the future, provide an effective, low-cost solution to a number of these problems.

[Dissolution behavior of Fuzi Lizhong pill based on simultaneous determination of two components in Glycyrrhizae Radix et Rhizoma].

PubMed

Jiang, Mao-Yuan; Zhang, Zhen; Shi, Jin-Feng; Zhang, Jin-Ming; Fu, Chao-Mei; Lin, Xia; Liu, Yu-Mei

2018-03-01

To preliminarily investigate the dissolution behavior of Fuzi Lizhong pill, provide the basis for its quality control and lay foundation for in vivo dissolution behavior by determining the dissolution rate of liquiritin and glycyrrhizic acid. High-performance liquid chromatography (HPLC) method for simultaneous content determination of the two active ingredients of liquiritin and glycyrrhizic acid in Fuzi Lizhong pill was established; The dissolution amount of these two active ingredients in fifteen batches of Fuzi Lizhong pill from five manufacturers was obtained at different time points, and then the cumulative dissolution rate was calculated and cumulative dissolution curve was drawn. The similarity of cumulative dissolution curve of different batches was evaluated based on the same factory, and the similarity of cumulative dissolution curve of different factories was evaluated based on the same active ingredients. The dissolution model of Fuzi Lizhong pill based on two kinds of active ingredients was established by fitting with the dissolution data. The best dissolution medium was 0.25% sodium lauryl sulfate. The dissolution behavior of liquiritin and glycyrrhizic acid in Fuzi Lizhong pill was basically the same and sustained release in 48 h. Three batches of the factories (factory 2, factory 3, factory 4 and factory 5) appeared to be similar in dissolution behavior, indicating similarity in dissolution behavior in most factories. Two of the three batches from factory 1 appeared to be not similar in dissolution behavior of liquiritin and glycyrrhizic acid. The dissolution data of the effective ingredients from different factories were same in fitting, and Weibull model was the best model in these batches. Fuzi Lizhong pill in 15 batches from 5 factories showed sustained release in 48 h, proving obviously slow releasing characteristics "pill is lenitive and keeps a long-time efficacy". The generally good dissolution behavior also suggested that quality of different batches from most factories was stable. The dissolution behavior of liquiritin and glycyrrhizic acid in different factories was different, suggesting that the source of medicinal materials and preparation technology parameters in five factories were different. Copyright© by the Chinese Pharmaceutical Association.

Adaptive laboratory evolution -- principles and applications for biotechnology.

PubMed

Dragosits, Martin; Mattanovich, Diethard

2013-07-01

Adaptive laboratory evolution is a frequent method in biological studies to gain insights into the basic mechanisms of molecular evolution and adaptive changes that accumulate in microbial populations during long term selection under specified growth conditions. Although regularly performed for more than 25 years, the advent of transcript and cheap next-generation sequencing technologies has resulted in many recent studies, which successfully applied this technique in order to engineer microbial cells for biotechnological applications. Adaptive laboratory evolution has some major benefits as compared with classical genetic engineering but also some inherent limitations. However, recent studies show how some of the limitations may be overcome in order to successfully incorporate adaptive laboratory evolution in microbial cell factory design. Over the last two decades important insights into nutrient and stress metabolism of relevant model species were acquired, whereas some other aspects such as niche-specific differences of non-conventional cell factories are not completely understood. Altogether the current status and its future perspectives highlight the importance and potential of adaptive laboratory evolution as approach in biotechnological engineering.

Pion Production for Neutrino Factory-challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Breton, Florian; Le Couedic, Clement; Soler, F. J. P.

2011-10-06

One of the key issues in the design of a Neutrino Factory target station is the determination of the optimum kinetic energy of the proton beam due to the large uncertainties in simulations of protons impinging on nuclear targets. In this paper we have developed a procedure to correct GEANT4 simulations for the HARP data, and we have determined the yield of muons expected at the front-end of a Neutrino Factory as a function of target material (Be, C, Al, Ta and Pb) and energy (3-12 GeV).The maximum muon yield is found between 5 and 8 GeV for high Zmore » targets and 3 GeV for low Z targets.« less

Efficiency in Complexity: Composition and Dynamic Nature of Mimivirus Replication Factories

PubMed Central

Milrot, Elad; Mutsafi, Yael; Ben-Dor, Shifra; Levin, Yishai; Savidor, Alon; Kartvelishvily, Elena

2016-01-01

ABSTRACT The recent discovery of multiple giant double-stranded DNA (dsDNA) viruses blurred the consensual distinction between viruses and cells due to their size, as well as to their structural and genetic complexity. A dramatic feature revealed by these viruses as well as by many positive-strand RNA viruses is their ability to rapidly form elaborate intracellular organelles, termed “viral factories,” where viral progeny are continuously generated. Here we report the first isolation of viral factories at progressive postinfection time points. The isolated factories were subjected to mass spectrometry-based proteomics, bioinformatics, and imaging analyses. These analyses revealed that numerous viral proteins are present in the factories but not in mature virions, thus implying that multiple and diverse proteins are required to promote the efficiency of viral factories as “production lines” of viral progeny. Moreover, our results highlight the dynamic and highly complex nature of viral factories, provide new and general insights into viral infection, and substantiate the intriguing notion that viral factories may represent the living state of viruses. IMPORTANCE Large dsDNA viruses such as vaccinia virus and the giant mimivirus, as well as many positive-strand RNA viruses, generate elaborate cytoplasmic organelles in which the multiple and diverse transactions required for viral replication and assembly occur. These organelles, which were termed “viral factories,” are attracting much interest due to the increasing realization that the rapid and continuous production of viral progeny is a direct outcome of the elaborate structure and composition of the factories, which act as efficient production lines. To get new insights into the nature and function of viral factories, we devised a method that allows, for the first time, the isolation of these organelles. Analyses of the isolated factories generated at different times postinfection by mass spectrometry-based proteomics provide new perceptions of their role and reveal the highly dynamic nature of these organelles. PMID:27581975

Front End and HFOFO Snake for a Muon Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Alexahin, Y.

2015-09-01

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, for neutrino factory and muon collider scenarios. They require a drift section from the target, a bunching section and amore » $$\\phi-\\delta E$$ rotation section leading into the cooling channel. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both $$\\mu^+$$ and $$\\mu^-$$ transversely and longitudinally. The status of the design is presented and variations are discussed.« less

Research designs for studies evaluating the effectiveness of change and improvement strategies.

PubMed

Eccles, M; Grimshaw, J; Campbell, M; Ramsay, C

2003-02-01

The methods of evaluating change and improvement strategies are not well described. The design and conduct of a range of experimental and non-experimental quantitative designs are considered. Such study designs should usually be used in a context where they build on appropriate theoretical, qualitative and modelling work, particularly in the development of appropriate interventions. A range of experimental designs are discussed including single and multiple arm randomised controlled trials and the use of more complex factorial and block designs. The impact of randomisation at both group and individual levels and three non-experimental designs (uncontrolled before and after, controlled before and after, and time series analysis) are also considered. The design chosen will reflect both the needs (and resources) in any particular circumstances and also the purpose of the evaluation. The general principle underlying the choice of evaluative design is, however, simple-those conducting such evaluations should use the most robust design possible to minimise bias and maximise generalisability.

Particle identification at an asymmetric B Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coyle, P.; Eigen, G.; Hitlin, D.

1991-09-01

Particle identification systems are an important component of any detector at a high-luminosity, asymmetric B Factory. In particular, excellent hadron identification is required to probe CP violation in B{sup 0} decays to CP eigenstates. The particle identification systems discussed below also provide help in separating leptons from hadrons at low momenta. We begin this chapter with a discussion of the physics motivation for providing particle identification, the inherent limitations due to interactions and decays in flight, and the requirements for hermiticity and angular coverage. A special feature of an asymmetric B Factory is the resulting asymmetry in the momentum distributionmore » as a function of polar angle; this will also be quantified and discussed. In the next section the three primary candidates, time-of-flight (TOF), energy loss (dE/dx), and Cerenkov counters, both ring-imaging and threshold, will be briefly described and evaluated. Following this, one of the candidates, a long-drift Cerenkov ring-imaging device, is described in detail to provide a reference design. Design considerations for a fast RICH are then described. A detailed discussion of aerogel threshold counter designs and associated R D conclude the chapter. 56 refs., 64 figs., 13 tabs.« less

Entrepreneurship Education through Industrial Internship for Technical and Vocational Students

NASA Astrophysics Data System (ADS)

Sumual, H.; Soputan, G. J.

2018-02-01

The spirit of entrepreneurship must be formed in an integrated process in learning so that commitment, responsibility and work ethic on the candidate of vocational high school graduates are effectively promoted. Learning teaching factory teaches students how to find problems, build prototypes, learn to make business plan, and learn to present their own solutions. The research objective is to assess the effectiveness of Teaching Factory implementation in improving the competence and skills of students in the field of entrepreneurship. The method used in this research is case study. Key informants were determined purposively in charge of teaching factory, students, and teachers who teach in productive subject. The results achieved in this study are: 1) culinary and hospitality units are the most active groups in producing products for teaching factory, 2) the role of entrepreneurial groups in each unit of production in order to increase productivity 3) students earn revenues of teaching factory and production unit get percentage of product or service sales, 3) the role of each production unit determines the level of teaching factory effectiveness.

Comparison of Grouping Schemes for Exposure to Total Dust in Cement Factories in Korea.

PubMed

Koh, Dong-Hee; Kim, Tae-Woo; Jang, Seung Hee; Ryu, Hyang-Woo; Park, Donguk

2015-08-01

The purpose of this study was to evaluate grouping schemes for exposure to total dust in cement industry workers using non-repeated measurement data. In total, 2370 total dust measurements taken from nine Portland cement factories in 1995-2009 were analyzed. Various grouping schemes were generated based on work process, job, factory, or average exposure. To characterize variance components of each grouping scheme, we developed mixed-effects models with a B-spline time trend incorporated as fixed effects and a grouping variable incorporated as a random effect. Using the estimated variance components, elasticity was calculated. To compare the prediction performances of different grouping schemes, 10-fold cross-validation tests were conducted, and root mean squared errors and pooled correlation coefficients were calculated for each grouping scheme. The five exposure groups created a posteriori by ranking job and factory combinations according to average dust exposure showed the best prediction performance and highest elasticity among various grouping schemes. Our findings suggest a grouping method based on ranking of job, and factory combinations would be the optimal choice in this population. Our grouping method may aid exposure assessment efforts in similar occupational settings, minimizing the misclassification of exposures. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Indoor air pollution evaluation with emphasize on HDI and biological assessment of HDA in the polyurethane factories.

PubMed

Mirmohammadi, Mirtaghi; Hakimi Ibrahim, M; Ahmad, Anees; Kadir, Mohd Omar Abdul; Mohammadyan, M; Mirashrafi, S B

2010-06-01

Today, many raw materials used in factories may have a dangerous effect on the physiological system of workers. One of them which is widely used in the polyurethane factories is diisocyanates. These compounds are widely used in surface coatings, polyurethane foams, adhesives, resins, elastomers, binders, and sealants. Exposure to diisocyanates causes irritation to the skin, mucous membranes, eyes, and respiratory tract. Hexamethylene diamine (HDA) is metabolite of hexamethylene diisocyanate (HDI). It is an excretory material by worker's urine who is exposed to HDI. Around 100 air samples were collected from five defined factories by midget impinger which contained dimethyl sulfoxide absorbent as a solvent and tryptamine as reagent. Samples were analyzed by high-performance liquid chromatography with EC\\UV detector using NIOSH 5522 method of sampling. Also, 50 urine samples collected from workers were also analyzed using William's biological analysis method. The concentration of HDI into all air samples were more than 88 microg/m(3), and they have shown high concentration of pollutant in the workplaces in comparison with NIOSH standard, and all of the workers' urine were contaminated by HDA. The correlation and regression test were used to obtain statistical model for HDI and HDA, which is useful for the prediction of diisocyanates pollution situation in the polyurethane factories.

A Recursive Partitioning Method for the Prediction of Preference Rankings Based Upon Kemeny Distances.

PubMed

D'Ambrosio, Antonio; Heiser, Willem J

2016-09-01

Preference rankings usually depend on the characteristics of both the individuals judging a set of objects and the objects being judged. This topic has been handled in the literature with log-linear representations of the generalized Bradley-Terry model and, recently, with distance-based tree models for rankings. A limitation of these approaches is that they only work with full rankings or with a pre-specified pattern governing the presence of ties, and/or they are based on quite strict distributional assumptions. To overcome these limitations, we propose a new prediction tree method for ranking data that is totally distribution-free. It combines Kemeny's axiomatic approach to define a unique distance between rankings with the CART approach to find a stable prediction tree. Furthermore, our method is not limited by any particular design of the pattern of ties. The method is evaluated in an extensive full-factorial Monte Carlo study with a new simulation design.

The Physics of the B Factories

NASA Astrophysics Data System (ADS)

Bevan, A. J.; Golob, B.; Mannel, Th.; Prell, S.; Yabsley, B. D.; Aihara, H.; Anulli, F.; Arnaud, N.; Aushev, T.; Beneke, M.; Beringer, J.; Bianchi, F.; Bigi, I. I.; Bona, M.; Brambilla, N.; Brodzicka, J.; Chang, P.; Charles, M. J.; Cheng, C. H.; Cheng, H.-Y.; Chistov, R.; Colangelo, P.; Coleman, J. P.; Drutskoy, A.; Druzhinin, V. P.; Eidelman, S.; Eigen, G.; Eisner, A. M.; Faccini, R.; Flood, K. T.; Gambino, P.; Gaz, A.; Gradl, W.; Hayashii, H.; Higuchi, T.; Hulsbergen, W. D.; Hurth, T.; Iijima, T.; Itoh, R.; Jackson, P. D.; Kass, R.; Kolomensky, Yu. G.; Kou, E.; Križan, P.; Kronfeld, A.; Kumano, S.; Kwon, Y. J.; Latham, T. E.; Leith, D. W. G. S.; Lüth, V.; Martinez-Vidal, F.; Meadows, B. T.; Mussa, R.; Nakao, M.; Nishida, S.; Ocariz, J.; Olsen, S. L.; Pakhlov, P.; Pakhlova, G.; Palano, A.; Pich, A.; Playfer, S.; Poluektov, A.; Porter, F. C.; Robertson, S. H.; Roney, J. M.; Roodman, A.; Sakai, Y.; Schwanda, C.; Schwartz, A. J.; Seidl, R.; Sekula, S. J.; Steinhauser, M.; Sumisawa, K.; Swanson, E. S.; Tackmann, F.; Trabelsi, K.; Uehara, S.; Uno, S.; van de Water, R.; Vasseur, G.; Verkerke, W.; Waldi, R.; Wang, M. Z.; Wilson, F. F.; Zupan, J.; Zupanc, A.; Adachi, I.; Albert, J.; Banerjee, Sw.; Bellis, M.; Ben-Haim, E.; Biassoni, P.; Cahn, R. N.; Cartaro, C.; Chauveau, J.; Chen, C.; Chiang, C. C.; Cowan, R.; Dalseno, J.; Davier, M.; Davies, C.; Dingfelder, J. C.; Echenard, B.; Epifanov, D.; Fulsom, B. G.; Gabareen, A. M.; Gary, J. W.; Godang, R.; Graham, M. T.; Hafner, A.; Hamilton, B.; Hartmann, T.; Hayasaka, K.; Hearty, C.; Iwasaki, Y.; Khodjamirian, A.; Kusaka, A.; Kuzmin, A.; Lafferty, G. D.; Lazzaro, A.; Li, J.; Lindemann, D.; Long, O.; Lusiani, A.; Marchiori, G.; Martinelli, M.; Miyabayashi, K.; Mizuk, R.; Mohanty, G. B.; Muller, D. R.; Nakazawa, H.; Ongmongkolkul, P.; Pacetti, S.; Palombo, F.; Pedlar, T. K.; Piilonen, L. E.; Pilloni, A.; Poireau, V.; Prothmann, K.; Pulliam, T.; Rama, M.; Ratcliff, B. N.; Roudeau, P.; Schrenk, S.; Schroeder, T.; Schubert, K. R.; Shen, C. P.; Shwartz, B.; Soffer, A.; Solodov, E. P.; Somov, A.; Starič, M.; Stracka, S.; Telnov, A. V.; Todyshev, K. Yu.; Tsuboyama, T.; Uglov, T.; Vinokurova, A.; Walsh, J. J.; Watanabe, Y.; Won, E.; Wormser, G.; Wright, D. H.; Ye, S.; Zhang, C. C.; Abachi, S.; Abashian, A.; Abe, K.; Abe, N.; Abe, R.; Abe, T.; Abrams, G. S.; Adam, I.; Adamczyk, K.; Adametz, A.; Adye, T.; Agarwal, A.; Ahmed, H.; Ahmed, M.; Ahmed, S.; Ahn, B. S.; Ahn, H. S.; Aitchison, I. J. R.; Akai, K.; Akar, S.; Akatsu, M.; Akemoto, M.; Akhmetshin, R.; Akre, R.; Alam, M. S.; Albert, J. N.; Aleksan, R.; Alexander, J. P.; Alimonti, G.; Allen, M. T.; Allison, J.; Allmendinger, T.; Alsmiller, J. R. G.; Altenburg, D.; Alwyn, K. E.; An, Q.; Anderson, J.; Andreassen, R.; Andreotti, D.; Andreotti, M.; Andress, J. C.; Angelini, C.; Anipko, D.; Anjomshoaa, A.; Anthony, P. L.; Antillon, E. A.; Antonioli, E.; Aoki, K.; Arguin, J. F.; Arinstein, K.; Arisaka, K.; Asai, K.; Asai, M.; Asano, Y.; Asgeirsson, D. J.; Asner, D. M.; Aso, T.; Aspinwall, M. L.; Aston, D.; Atmacan, H.; Aubert, B.; Aulchenko, V.; Ayad, R.; Azemoon, T.; Aziz, T.; Azzolini, V.; Azzopardi, D. E.; Baak, M. A.; Back, J. J.; Bagnasco, S.; Bahinipati, S.; Bailey, D. S.; Bailey, S.; Bailly, P.; van Bakel, N.; Bakich, A. M.; Bala, A.; Balagura, V.; Baldini-Ferroli, R.; Ban, Y.; Banas, E.; Band, H. R.; Banerjee, S.; Baracchini, E.; Barate, R.; Barberio, E.; Barbero, M.; Bard, D. J.; Barillari, T.; Barlow, N. R.; Barlow, R. J.; Barrett, M.; Bartel, W.; Bartelt, J.; Bartoldus, R.; Batignani, G.; Battaglia, M.; Bauer, J. M.; Bay, A.; Beaulieu, M.; Bechtle, P.; Beck, T. W.; Becker, J.; Becla, J.; Bedny, I.; Behari, S.; Behera, P. K.; Behn, E.; Behr, L.; Beigbeder, C.; Beiline, D.; Bell, R.; Bellini, F.; Bellodi, G.; Belous, K.; Benayoun, M.; Benelli, G.; Benitez, J. F.; Benkebil, M.; Berger, N.; Bernabeu, J.; Bernard, D.; Bernet, R.; Bernlochner, F. U.; Berryhill, J. W.; Bertsche, K.; Besson, P.; Best, D. S.; Bettarini, S.; Bettoni, D.; Bhardwaj, V.; Bhimji, W.; Bhuyan, B.; Biagini, M. E.; Biasini, M.; van Bibber, K.; Biesiada, J.; Bingham, I.; Bionta, R. M.; Bischofberger, M.; Bitenc, U.; Bizjak, I.; Blanc, F.; Blaylock, G.; Blinov, V. E.; Bloom, E.; Bloom, P. C.; Blount, N. L.; Blouw, J.; Bly, M.; Blyth, S.; Boeheim, C. T.; Bomben, M.; Bondar, A.; Bondioli, M.; Bonneaud, G. R.; Bonvicini, G.; Booke, M.; Booth, J.; Borean, C.; Borgland, A. W.; Borsato, E.; Bosi, F.; Bosisio, L.; Botov, A. A.; Bougher, J.; Bouldin, K.; Bourgeois, P.; Boutigny, D.; Bowerman, D. A.; Boyarski, A. M.; Boyce, R. F.; Boyd, J. T.; Bozek, A.; Bozzi, C.; Bračko, M.; Brandenburg, G.; Brandt, T.; Brau, B.; Brau, J.; Breon, A. B.; Breton, D.; Brew, C.; Briand, H.; Bright-Thomas, P. G.; Brigljević, V.; Britton, D. I.; Brochard, F.; Broomer, B.; Brose, J.; Browder, T. E.; Brown, C. L.; Brown, C. M.; Brown, D. N.; Browne, M.; Bruinsma, M.; Brunet, S.; Bucci, F.; Buchanan, C.; Buchmueller, O. L.; Bünger, C.; Bugg, W.; Bukin, A. D.; Bula, R.; Bulten, H.; Burchat, P. R.; Burgess, W.; Burke, J. P.; Button-Shafer, J.; Buzykaev, A. R.; Buzzo, A.; Cai, Y.; Calabrese, R.; Calcaterra, A.; Calderini, G.; Camanzi, B.; Campagna, E.; Campagnari, C.; Capra, R.; Carassiti, V.; Carpinelli, M.; Carroll, M.; Casarosa, G.; Casey, B. C. K.; Cason, N. M.; Castelli, G.; Cavallo, N.; Cavoto, G.; Cecchi, A.; Cenci, R.; Cerizza, G.; Cervelli, A.; Ceseracciu, A.; Chai, X.; Chaisanguanthum, K. S.; Chang, M. C.; Chang, Y. H.; Chang, Y. W.; Chao, D. S.; Chao, M.; Chao, Y.; Charles, E.; Chavez, C. A.; Cheaib, R.; Chekelian, V.; Chen, A.; Chen, E.; Chen, G. P.; Chen, H. F.; Chen, J.-H.; Chen, J. C.; Chen, K. F.; Chen, P.; Chen, S.; Chen, W. T.; Chen, X.; Chen, X. R.; Chen, Y. Q.; Cheng, B.; Cheon, B. G.; Chevalier, N.; Chia, Y. M.; Chidzik, S.; Chilikin, K.; Chistiakova, M. V.; Cizeron, R.; Cho, I. S.; Cho, K.; Chobanova, V.; Choi, H. H. F.; Choi, K. S.; Choi, S. K.; Choi, Y.; Choi, Y. K.; Christ, S.; Chu, P. H.; Chun, S.; Chuvikov, A.; Cibinetto, G.; Cinabro, D.; Clark, A. R.; Clark, P. J.; Clarke, C. K.; Claus, R.; Claxton, B.; Clifton, Z. C.; Cochran, J.; Cohen-Tanugi, J.; Cohn, H.; Colberg, T.; Cole, S.; Colecchia, F.; Condurache, C.; Contri, R.; Convert, P.; Convery, M. R.; Cooke, P.; Copty, N.; Cormack, C. M.; Dal Corso, F.; Corwin, L. A.; Cossutti, F.; Cote, D.; Cotta Ramusino, A.; Cottingham, W. N.; Couderc, F.; Coupal, D. P.; Covarelli, R.; Cowan, G.; Craddock, W. W.; Crane, G.; Crawley, H. B.; Cremaldi, L.; Crescente, A.; Cristinziani, M.; Crnkovic, J.; Crosetti, G.; Cuhadar-Donszelmann, T.; Cunha, A.; Curry, S.; D'Orazio, A.; Dû, S.; Dahlinger, G.; Dahmes, B.; Dallapiccola, C.; Danielson, N.; Danilov, M.; Das, A.; Dash, M.; Dasu, S.; Datta, M.; Daudo, F.; Dauncey, P. D.; David, P.; Davis, C. L.; Day, C. T.; De Mori, F.; De Domenico, G.; De Groot, N.; De la Vaissière, C.; de la Vaissière, Ch.; de Lesquen, A.; De Nardo, G.; de Sangro, R.; De Silva, A.; DeBarger, S.; Decker, F. J.; del Amo Sanchez, P.; Del Buono, L.; Del Gamba, V.; del Re, D.; Della Ricca, G.; Denig, A. G.; Derkach, D.; Derrington, I. M.; DeStaebler, H.; Destree, J.; Devmal, S.; Dey, B.; Di Girolamo, B.; Marco, E. Di; Dickopp, M.; Dima, M. O.; Dittrich, S.; Dittongo, S.; Dixon, P.; Dneprovsky, L.; Dohou, F.; Doi, Y.; Doležal, Z.; Doll, D. A.; Donald, M.; Dong, L.; Dong, L. Y.; Dorfan, J.; Dorigo, A.; Dorsten, M. P.; Dowd, R.; Dowdell, J.; Drásal, Z.; Dragic, J.; Drummond, B. W.; Dubitzky, R. S.; Dubois-Felsmann, G. P.; Dubrovin, M. S.; Duh, Y. C.; Duh, Y. T.; Dujmic, D.; Dungel, W.; Dunwoodie, W.; Dutta, D.; Dvoretskii, A.; Dyce, N.; Ebert, M.; Eckhart, E. A.; Ecklund, S.; Eckmann, R.; Eckstein, P.; Edgar, C. L.; Edwards, A. J.; Egede, U.; Eichenbaum, A. M.; Elmer, P.; Emery, S.; Enari, Y.; Enomoto, R.; Erdos, E.; Erickson, R.; Ernst, J. A.; Erwin, R. J.; Escalier, M.; Eschenburg, V.; Eschrich, I.; Esen, S.; Esteve, L.; Evangelisti, F.; Everton, C. W.; Eyges, V.; Fabby, C.; Fabozzi, F.; Fahey, S.; Falbo, M.; Fan, S.; Fang, F.; Fanin, C.; Farbin, A.; Farhat, H.; Fast, J. E.; Feindt, M.; Fella, A.; Feltresi, E.; Ferber, T.; Fernholz, R. E.; Ferrag, S.; Ferrarotto, F.; Ferroni, F.; Field, R. C.; Filippi, A.; Finocchiaro, G.; Fioravanti, E.; Firmino da Costa, J.; Fischer, P.-A.; Fisher, A. S.; Fisher, P. H.; Flacco, C. J.; Flack, R. L.; Flaecher, H. U.; Flanagan, J.; Flanigan, J. M.; Ford, K. E.; Ford, W. T.; Forster, I. J.; Forti, A. C.; Forti, F.; Fortin, D.; Foster, B.; Foulkes, S. D.; Fouque, G.; Fox, J.; Franchini, P.; Franco Sevilla, M.; Franek, B.; Frank, E. D.; Fransham, K. B.; Fratina, S.; Fratini, K.; Frey, A.; Frey, R.; Friedl, M.; Fritsch, M.; Fry, J. R.; Fujii, H.; Fujikawa, M.; Fujita, Y.; Fujiyama, Y.; Fukunaga, C.; Fukushima, M.; Fullwood, J.; Funahashi, Y.; Funakoshi, Y.; Furano, F.; Furman, M.; Furukawa, K.; Futterschneider, H.; Gabathuler, E.; Gabriel, T. A.; Gabyshev, N.; Gaede, F.; Gagliardi, N.; Gaidot, A.; Gaillard, J.-M.; Gaillard, J. R.; Galagedera, S.; Galeazzi, F.; Gallo, F.; Gamba, D.; Gamet, R.; Gan, K. K.; Gandini, P.; Ganguly, S.; Ganzhur, S. F.; Gao, Y. Y.; Gaponenko, I.; Garmash, A.; Garra Tico, J.; Garzia, I.; Gaspero, M.; Gastaldi, F.; Gatto, C.; Gaur, V.; Geddes, N. I.; Geld, T. L.; Genat, J.-F.; George, K. A.; George, M.; George, S.; Georgette, Z.; Gershon, T. J.; Gill, M. S.; Gillard, R.; Gilman, J. D.; Giordano, F.; Giorgi, M. A.; Giraud, P.-F.; Gladney, L.; Glanzman, T.; Glattauer, R.; Go, A.; Goetzen, K.; Goh, Y. M.; Gokhroo, G.; Goldenzweig, P.; Golubev, V. B.; Gopal, G. P.; Gordon, A.; Gorišek, A.; Goriletsky, V. I.; Gorodeisky, R.; Gosset, L.; Gotow, K.; Gowdy, S. J.; Graffin, P.; Grancagnolo, S.; Grauges, E.; Graziani, G.; Green, M. G.; Greene, M. G.; Grenier, G. J.; Grenier, P.; Griessinger, K.; Grillo, A. A.; Grinyov, B. V.; Gritsan, A. V.; Grosdidier, G.; Grosse Perdekamp, M.; Grosso, P.; Grothe, M.; Groysman, Y.; Grünberg, O.; Guido, E.; Guler, H.; Gunawardane, N. J. W.; Guo, Q. H.; Guo, R. S.; Guo, Z. J.; Guttman, N.; Ha, H.; Ha, H. C.; Haas, T.; Haba, J.; Hachtel, J.; Hadavand, H. K.; Hadig, T.; Hagner, C.; Haire, M.; Haitani, F.; Haji, T.; Haller, G.; Halyo, V.; Hamano, K.; Hamasaki, H.; Hamel de Monchenault, G.; Hamilton, J.; Hamilton, R.; Hamon, O.; Han, B. Y.; Han, Y. L.; Hanada, H.; Hanagaki, K.; Handa, F.; Hanson, J. E.; Hanushevsky, A.; Hara, K.; Hara, T.; Harada, Y.; Harrison, P. F.; Harrison, T. J.; Harrop, B.; Hart, A. J.; Hart, P. A.; Hartfiel, B. L.; Harton, J. L.; Haruyama, T.; Hasan, A.; Hasegawa, Y.; Hast, C.; Hastings, N. C.; Hasuko, K.; Hauke, A.; Hawkes, C. M.; Hayashi, K.; Hazumi, M.; Hee, C.; Heenan, E. M.; Heffernan, D.; Held, T.; Henderson, R.; Henderson, S. W.; Hertzbach, S. S.; Hervé, S.; Heß, M.; Heusch, C. A.; Hicheur, A.; Higashi, Y.; Higasino, Y.; Higuchi, I.; Hikita, S.; Hill, E. J.; Himel, T.; Hinz, L.; Hirai, T.; Hirano, H.; Hirschauer, J. F.; Hitlin, D. G.; Hitomi, N.; Hodgkinson, M. C.; Höcker, A.; Hoi, C. T.; Hojo, T.; Hokuue, T.; Hollar, J. J.; Hong, T. M.; Honscheid, K.; Hooberman, B.; Hopkins, D. A.; Horii, Y.; Hoshi, Y.; Hoshina, K.; Hou, S.; Hou, W. S.; Hryn'ova, T.; Hsiung, Y. B.; Hsu, C. L.; Hsu, S. C.; Hu, H.; Hu, T.; Huang, H. C.; Huang, T. J.; Huang, Y. C.; Huard, Z.; Huffer, M. E.; Hufnagel, D.; Hung, T.; Hutchcroft, D. E.; Hyun, H. J.; Ichizawa, S.; Igaki, T.; Igarashi, A.; Igarashi, S.; Igarashi, Y.; Igonkina, O.; Ikado, K.; Ikeda, H.; Ikeda, H.; Ikeda, K.; Ilic, J.; Inami, K.; Innes, W. R.; Inoue, Y.; Ishikawa, A.; Ishino, H.; Itagaki, K.; Itami, S.; Itoh, K.; Ivanchenko, V. N.; Iverson, R.; Iwabuchi, M.; Iwai, G.; Iwai, M.; Iwaida, S.; Iwamoto, M.; Iwasaki, H.; Iwasaki, M.; Iwashita, T.; Izen, J. M.; Jackson, D. J.; Jackson, F.; Jackson, G.; Jackson, P. S.; Jacobsen, R. G.; Jacoby, C.; Jaegle, I.; Jain, V.; Jalocha, P.; Jang, H. K.; Jasper, H.; Jawahery, A.; Jayatilleke, S.; Jen, C. M.; Jensen, F.; Jessop, C. P.; Ji, X. B.; John, M. J. J.; Johnson, D. R.; Johnson, J. R.; Jolly, S.; Jones, M.; Joo, K. K.; Joshi, N.; Joshi, N. J.; Judd, D.; Julius, T.; Kadel, R. W.; Kadyk, J. A.; Kagan, H.; Kagan, R.; Kah, D. H.; Kaiser, S.; Kaji, H.; Kajiwara, S.; Kakuno, H.; Kameshima, T.; Kaminski, J.; Kamitani, T.; Kaneko, J.; Kang, J. H.; Kang, J. S.; Kani, T.; Kapusta, P.; Karbach, T. M.; Karolak, M.; Karyotakis, Y.; Kasami, K.; Katano, G.; Kataoka, S. U.; Katayama, N.; Kato, E.; Kato, Y.; Kawai, H.; Kawai, M.; Kawamura, N.; Kawasaki, T.; Kay, J.; Kay, M.; Kelly, M. P.; Kelsey, M. H.; Kent, N.; Kerth, L. T.; Khan, A.; Khan, H. R.; Kharakh, D.; Kibayashi, A.; Kichimi, H.; Kiesling, C.; Kikuchi, M.; Kikutani, E.; Kim, B. H.; Kim, C. H.; Kim, D. W.; Kim, H.; Kim, H. J.; Kim, H. O.; Kim, H. W.; Kim, J. B.; Kim, J. H.; Kim, K. T.; Kim, M. J.; Kim, P.; Kim, S. K.; Kim, S. M.; Kim, T. H.; Kim, Y. I.; Kim, Y. J.; King, G. J.; Kinoshita, K.; Kirk, A.; Kirkby, D.; Kitayama, I.; Klemetti, M.; Klose, V.; Klucar, J.; Knecht, N. S.; Knoepfel, K. J.; Knowles, D. J.; Ko, B. R.; Kobayashi, N.; Kobayashi, S.; Kobayashi, T.; Kobel, M. J.; Koblitz, S.; Koch, H.; Kocian, M. L.; Kodyš, P.; Koeneke, K.; Kofler, R.; Koike, S.; Koishi, S.; Koiso, H.; Kolb, J. A.; Kolya, S. D.; Kondo, Y.; Konishi, H.; Koppenburg, P.; Koptchev, V. B.; Kordich, T. M. B.; Korol, A. A.; Korotushenko, K.; Korpar, S.; Kouzes, R. T.; Kovalskyi, D.; Kowalewski, R.; Kozakai, Y.; Kozanecki, W.; Kral, J. F.; Krasnykh, A.; Krause, R.; Kravchenko, E. A.; Krebs, J.; Kreisel, A.; Kreps, M.; Krishnamurthy, M.; Kroeger, R.; Kroeger, W.; Krokovny, P.; Kronenbitter, B.; Kroseberg, J.; Kubo, T.; Kuhr, T.; Kukartsev, G.; Kulasiri, R.; Kulikov, A.; Kumar, R.; Kumar, S.; Kumita, T.; Kuniya, T.; Kunze, M.; Kuo, C. C.; Kuo, T.-L.; Kurashiro, H.; Kurihara, E.; Kurita, N.; Kuroki, Y.; Kurup, A.; Kutter, P. E.; Kuznetsova, N.; Kvasnička, P.; Kyberd, P.; Kyeong, S. H.; Lacker, H. M.; Lae, C. K.; Lamanna, E.; Lamsa, J.; Lanceri, L.; Landi, L.; Lang, M. I.; Lange, D. J.; Lange, J. S.; Langenegger, U.; Langer, M.; Lankford, A. J.; Lanni, F.; Laplace, S.; Latour, E.; Lau, Y. P.; Lavin, D. R.; Layter, J.; Lebbolo, H.; LeClerc, C.; Leddig, T.; Leder, G.; Le Diberder, F.; Lee, C. L.; Lee, J.; Lee, J. S.; Lee, M. C.; Lee, M. H.; Lee, M. J.; Lee, S.-J.; Lee, S. E.; Lee, S. H.; Lee, Y. J.; Lees, J. P.; Legendre, M.; Leitgab, M.; Leitner, R.; Leonardi, E.; Leonidopoulos, C.; Lepeltier, V.; Leruste, Ph.; Lesiak, T.; Levi, M. E.; Levy, S. L.; Lewandowski, B.; Lewczuk, M. J.; Lewis, P.; Li, H.; Li, H. B.; Li, S.; Li, X.; Li, Y.; Gioi, L. Li; Libby, J.; Lidbury, J.; Lillard, V.; Lim, C. L.; Limosani, A.; Lin, C. S.; Lin, J. Y.; Lin, S. W.; Lin, Y. S.; Lindquist, B.; Lindsay, C.; Lista, L.; Liu, C.; Liu, F.; Liu, H.; Liu, H. M.; Liu, J.; Liu, R.; Liu, T.; Liu, Y.; Liu, Z. Q.; Liventsev, D.; Lo Vetere, M.; Locke, C. B.; Lockman, W. S.; Di Lodovico, F.; Lombardo, V.; London, G. W.; Lopes Pegna, D.; Lopez, L.; Lopez-March, N.; Lory, J.; LoSecco, J. M.; Lou, X. C.; Louvot, R.; Lu, A.; Lu, C.; Lu, M.; Lu, R. S.; Lueck, T.; Luitz, S.; Lukin, P.; Lund, P.; Luppi, E.; Lutz, A. M.; Lutz, O.; Lynch, G.; Lynch, H. L.; Lyon, A. J.; Lyubinsky, V. R.; MacFarlane, D. B.; Mackay, C.; MacNaughton, J.; Macri, M. M.; Madani, S.; Mader, W. F.; Majewski, S. A.; Majumder, G.; Makida, Y.; Malaescu, B.; Malaguti, R.; Malclés, J.; Mallik, U.; Maly, E.; Mamada, H.; Manabe, A.; Mancinelli, G.; Mandelkern, M.; Mandl, F.; Manfredi, P. F.; Mangeol, D. J. J.; Manoni, E.; Mao, Z. P.; Margoni, M.; Marker, C. E.; Markey, G.; Marks, J.; Marlow, D.; Marques, V.; Marsiske, H.; Martellotti, S.; Martin, E. C.; Martin, J. P.; Martin, L.; Martinez, A. J.; Marzolla, M.; Mass, A.; Masuzawa, M.; Mathieu, A.; Matricon, P.; Matsubara, T.; Matsuda, T.; Matsuda, T.; Matsumoto, H.; Matsumoto, S.; Matsumoto, T.; Matsuo, H.; Mattison, T. S.; Matvienko, D.; Matyja, A.; Mayer, B.; Mazur, M. A.; Mazzoni, M. A.; McCulloch, M.; McDonald, J.; McFall, J. D.; McGrath, P.; McKemey, A. K.; McKenna, J. A.; Mclachlin, S. E.; McMahon, S.; McMahon, T. R.; McOnie, S.; Medvedeva, T.; Melen, R.; Mellado, B.; Menges, W.; Menke, S.; Merchant, A. M.; Merkel, J.; Messner, R.; Metcalfe, S.; Metzler, S.; Meyer, N. T.; Meyer, T. I.; Meyer, W. T.; Michael, A. K.; Michelon, G.; Michizono, S.; Micout, P.; Miftakov, V.; Mihalyi, A.; Mikami, Y.; Milanes, D. A.; Milek, M.; Mimashi, T.; Minamora, J. S.; Mindas, C.; Minutoli, S.; Mir, L. M.; Mishra, K.; Mitaroff, W.; Miyake, H.; Miyashita, T. S.; Miyata, H.; Miyazaki, Y.; Moffitt, L. C.; Mohanty, G. B.; Mohapatra, A.; Mohapatra, A. K.; Mohapatra, D.; Moll, A.; Moloney, G. R.; Mols, J. P.; Mommsen, R. K.; Monge, M. R.; Monorchio, D.; Moore, T. B.; Moorhead, G. F.; Mora de Freitas, P.; Morandin, M.; Morgan, N.; Morgan, S. E.; Morganti, M.; Morganti, S.; Mori, S.; Mori, T.; Morii, M.; Morris, J. P.; Morsani, F.; Morton, G. W.; Moss, L. J.; Mouly, J. P.; Mount, R.; Mueller, J.; Müller-Pfefferkorn, R.; Mugge, M.; Muheim, F.; Muir, A.; Mullin, E.; Munerato, M.; Murakami, A.; Murakami, T.; Muramatsu, N.; Musico, P.; Nagai, I.; Nagamine, T.; Nagasaka, Y.; Nagashima, Y.; Nagayama, S.; Nagel, M.; Naisbit, M. T.; Nakadaira, T.; Nakahama, Y.; Nakajima, M.; Nakajima, T.; Nakamura, I.; Nakamura, T.; Nakamura, T. T.; Nakano, E.; Nakayama, H.; Nam, J. W.; Narita, S.; Narsky, I.; Nash, J. A.; Natkaniec, Z.; Nauenberg, U.; Nayak, M.; Neal, H.; Nedelkovska, E.; Negrini, M.; Neichi, K.; Nelson, D.; Nelson, S.; Neri, N.; Nesom, G.; Neubauer, S.; Newman-Coburn, D.; Ng, C.; Nguyen, X.; Nicholson, H.; Niebuhr, C.; Nief, J. Y.; Niiyama, M.; Nikolich, M. B.; Nisar, N. K.; Nishimura, K.; Nishio, Y.; Nitoh, O.; Nogowski, R.; Noguchi, S.; Nomura, T.; Nordby, M.; Nosochkov, Y.; Novokhatski, A.; Nozaki, S.; Nozaki, T.; Nugent, I. M.; O'Grady, C. P.; O'Neale, S. W.; O'Neill, F. G.; Oberhof, B.; Oddone, P. J.; Ofte, I.; Ogawa, A.; Ogawa, K.; Ogawa, S.; Ogawa, Y.; Ohkubo, R.; Ohmi, K.; Ohnishi, Y.; Ohno, F.; Ohshima, T.; Ohshima, Y.; Ohuchi, N.; Oide, K.; Oishi, N.; Okabe, T.; Okazaki, N.; Okazaki, T.; Okuno, S.; Olaiya, E. O.; Olivas, A.; Olley, P.; Olsen, J.; Ono, S.; Onorato, G.; Onuchin, A. P.; Onuki, Y.; Ooba, T.; Orimoto, T. J.; Oshima, T.; Osipenkov, I. L.; Ostrowicz, W.; Oswald, C.; Otto, S.; Oyang, J.; Oyanguren, A.; Ozaki, H.; Ozcan, V. E.; Paar, H. P.; Padoan, C.; Paick, K.; Palka, H.; Pan, B.; Pan, Y.; Panduro Vazquez, W.; Panetta, J.; Panova, A. I.; Panvini, R. S.; Panzenböck, E.; Paoloni, E.; Paolucci, P.; Pappagallo, M.; Paramesvaran, S.; Park, C. S.; Park, C. W.; Park, H.; Park, H. K.; Park, K. S.; Park, W.; Parry, R. J.; Parslow, N.; Passaggio, S.; Pastore, F. C.; Patel, P. M.; Patrignani, C.; Patteri, P.; Pavel, T.; Pavlovich, J.; Payne, D. J.; Peak, L. S.; Peimer, D. R.; Pelizaeus, M.; Pellegrini, R.; Pelliccioni, M.; Peng, C. C.; Peng, J. C.; Peng, K. C.; Peng, T.; Penichot, Y.; Pennazzi, S.; Pennington, M. R.; Penny, R. C.; Penzkofer, A.; Perazzo, A.; Perez, A.; Perl, M.; Pernicka, M.; Perroud, J.-P.; Peruzzi, I. M.; Pestotnik, R.; Peters, K.; Peters, M.; Petersen, B. A.; Petersen, T. C.; Petigura, E.; Petrak, S.; Petrella, A.; Petrič, M.; Petzold, A.; Pia, M. G.; Piatenko, T.; Piccolo, D.; Piccolo, M.; Piemontese, L.; Piemontese, M.; Pierini, M.; Pierson, S.; Pioppi, M.; Piredda, G.; Pivk, M.; Plaszczynski, S.; Polci, F.; Pompili, A.; Poropat, P.; Posocco, M.; Potter, C. T.; Potter, R. J. L.; Prasad, V.; Prebys, E.; Prencipe, E.; Prendki, J.; Prepost, R.; Prest, M.; Prim, M.; Pripstein, M.; Prudent, X.; Pruvot, S.; Puccio, E. M. T.; Purohit, M. V.; Qi, N. D.; Quinn, H.; Raaf, J.; Rabberman, R.; Raffaelli, F.; Ragghianti, G.; Rahatlou, S.; Rahimi, A. M.; Rahmat, R.; Rakitin, A. Y.; Randle-Conde, A.; Rankin, P.; Rashevskaya, I.; Ratkovsky, S.; Raven, G.; Re, V.; Reep, M.; Regensburger, J. J.; Reidy, J.; Reif, R.; Reisert, B.; Renard, C.; Renga, F.; Ricciardi, S.; Richman, J. D.; Ritchie, J. L.; Ritter, M.; Rivetta, C.; Rizzo, G.; Roat, C.; Robbe, P.; Roberts, D. A.; Robertson, A. I.; Robutti, E.; Rodier, S.; Rodriguez, D. M.; Rodriguez, J. L.; Rodriguez, R.; Roe, N. A.; Röhrken, M.; Roethel, W.; Rolquin, J.; Romanov, L.; Romosan, A.; Ronan, M. T.; Rong, G.; Ronga, F. J.; Roos, L.; Root, N.; Rosen, M.; Rosenberg, E. I.; Rossi, A.; Rostomyan, A.; Rotondo, M.; Roussot, E.; Roy, J.; Rozanska, M.; Rozen, Y.; Rozen, Y.; Rubin, A. E.; Ruddick, W. O.; Ruland, A. M.; Rybicki, K.; Ryd, A.; Ryu, S.; Ryuko, J.; Sabik, S.; Sacco, R.; Saeed, M. A.; Safai Tehrani, F.; Sagawa, H.; Sahoo, H.; Sahu, S.; Saigo, M.; Saito, T.; Saitoh, S.; Sakai, K.; Sakamoto, H.; Sakaue, H.; Saleem, M.; Salnikov, A. A.; Salvati, E.; Salvatore, F.; Samuel, A.; Sanders, D. A.; Sanders, P.; Sandilya, S.; Sandrelli, F.; Sands, W.; Sands, W. R.; Sanpei, M.; Santel, D.; Santelj, L.; Santoro, V.; Santroni, A.; Sanuki, T.; Sarangi, T. R.; Saremi, S.; Sarti, A.; Sasaki, T.; Sasao, N.; Satapathy, M.; Sato, Nobuhiko; Sato, Noriaki; Sato, Y.; Satoyama, N.; Satpathy, A.; Savinov, V.; Savvas, N.; Saxton, O. H.; Sayeed, K.; Schaffner, S. F.; Schalk, T.; Schenk, S.; Schieck, J. R.; Schietinger, T.; Schilling, C. J.; Schindler, R. H.; Schmid, S.; Schmitz, R. E.; Schmuecker, H.; Schneider, O.; Schnell, G.; Schönmeier, P.; Schofield, K. C.; Schott, G.; Schröder, H.; Schram, M.; Schubert, J.; Schümann, J.; Schultz, J.; Schumm, B. A.; Schune, M. H.; Schwanke, U.; Schwarz, H.; Schwiening, J.; Schwierz, R.; Schwitters, R. F.; Sciacca, C.; Sciolla, G.; Scott, I. J.; Seeman, J.; Seiden, A.; Seitz, R.; Seki, T.; Sekiya, A. I.; Semenov, S.; Semmler, D.; Sen, S.; Senyo, K.; Seon, O.; Serbo, V. V.; Serednyakov, S. I.; Serfass, B.; Serra, M.; Serrano, J.; Settai, Y.; Seuster, R.; Sevior, M. E.; Shakhova, K. V.; Shang, L.; Shapkin, M.; Sharma, V.; Shebalin, V.; Shelkov, V. G.; Shen, B. C.; Shen, D. Z.; Shen, Y. T.; Sherwood, D. J.; Shibata, T.; Shibata, T. A.; Shibuya, H.; Shidara, T.; Shimada, K.; Shimoyama, M.; Shinomiya, S.; Shiu, J. G.; Shorthouse, H. W.; Shpilinskaya, L. I.; Sibidanov, A.; Sicard, E.; Sidorov, A.; Sidorov, V.; Siegle, V.; Sigamani, M.; Simani, M. C.; Simard, M.; Simi, G.; Simon, F.; Simonetto, F.; Sinev, N. B.; Singh, H.; Singh, J. B.; Sinha, R.; Sitt, S.; Skovpen, Yu. I.; Sloane, R. J.; Smerkol, P.; Smith, A. J. S.; Smith, D.; Smith, D. S.; Smith, J. G.; Smol, A.; Snoek, H. L.; Snyder, A.; So, R. Y.; Sobie, R. J.; Soderstrom, E.; Soha, A.; Sohn, Y. S.; Sokoloff, M. D.; Sokolov, A.; Solagna, P.; Solovieva, E.; Soni, N.; Sonnek, P.; Sordini, V.; Spaan, B.; Spanier, S. M.; Spencer, E.; Speziali, V.; Spitznagel, M.; Spradlin, P.; Staengle, H.; Stamen, R.; Stanek, M.; Stanič, S.; Stark, J.; Steder, M.; Steininger, H.; Steinke, M.; Stelzer, J.; Stevanato, E.; Stocchi, A.; Stock, R.; Stoeck, H.; Stoker, D. P.; Stroili, R.; Strom, D.; Strother, P.; Strube, J.; Stugu, B.; Stypula, J.; Su, D.; Suda, R.; Sugahara, R.; Sugi, A.; Sugimura, T.; Sugiyama, A.; Suitoh, S.; Sullivan, M. K.; Sumihama, M.; Sumiyoshi, T.; Summers, D. J.; Sun, L.; Sun, S.; Sundermann, J. E.; Sung, H. F.; Susaki, Y.; Sutcliffe, P.; Suzuki, A.; Suzuki, J.; Suzuki, J. I.; Suzuki, K.; Suzuki, S.; Suzuki, S. Y.; Swain, J. E.; Swain, S. K.; T'Jampens, S.; Tabata, M.; Tackmann, K.; Tajima, H.; Tajima, O.; Takahashi, K.; Takahashi, S.; Takahashi, T.; Takasaki, F.; Takayama, T.; Takita, M.; Tamai, K.; Tamponi, U.; Tamura, N.; Tan, N.; Tan, P.; Tanabe, K.; Tanabe, T.; Tanaka, H. A.; Tanaka, J.; Tanaka, M.; Tanaka, S.; Tanaka, Y.; Tanida, K.; Taniguchi, N.; Taras, P.; Tasneem, N.; Tatishvili, G.; Tatomi, T.; Tawada, M.; Taylor, F.; Taylor, G. N.; Taylor, G. P.; Telnov, V. I.; Teodorescu, L.; Ter-Antonyan, R.; Teramoto, Y.; Teytelman, D.; Thérin, G.; Thiebaux, Ch.; Thiessen, D.; Thomas, E. W.; Thompson, J. M.; Thorne, F.; Tian, X. C.; Tibbetts, M.; Tikhomirov, I.; Tinslay, J. S.; Tiozzo, G.; Tisserand, V.; Tocut, V.; Toki, W. H.; Tomassini, E. W.; Tomoto, M.; Tomura, T.; Torassa, E.; Torrence, E.; Tosi, S.; Touramanis, C.; Toussaint, J. C.; Tovey, S. N.; Trapani, P. P.; Treadwell, E.; Triggiani, G.; Trincaz-Duvoid, S.; Trischuk, W.; Troost, D.; Trunov, A.; Tsai, K. L.; Tsai, Y. T.; Tsujita, Y.; Tsukada, K.; Tsukamoto, T.; Tuggle, J. M.; Tumanov, A.; Tung, Y. W.; Turnbull, L.; Turner, J.; Turri, M.; Uchida, K.; Uchida, M.; Uchida, Y.; Ueki, M.; Ueno, K.; Ujiie, N.; Ulmer, K. A.; Unno, Y.; Urquijo, P.; Ushiroda, Y.; Usov, Y.; Usseglio, M.; Usuki, Y.; Uwer, U.; Va'vra, J.; Vahsen, S. E.; Vaitsas, G.; Valassi, A.; Vallazza, E.; Vallereau, A.; Vanhoefer, P.; van Hoek, W. C.; Van Hulse, C.; van Winkle, D.; Varner, G.; Varnes, E. W.; Varvell, K. E.; Vasileiadis, G.; Velikzhanin, Y. S.; Verderi, M.; Versillé, S.; Vervink, K.; Viaud, B.; Vidal, P. B.; Villa, S.; Villanueva-Perez, P.; Vinograd, E. L.; Vitale, L.; Vitug, G. M.; Voß, C.; Voci, C.; Voena, C.; Volk, A.; von Wimmersperg-Toeller, J. H.; Vorobyev, V.; Vossen, A.; Vuagnin, G.; Vuosalo, C. O.; Wacker, K.; Wagner, A. P.; Wagner, D. L.; Wagner, G.; Wagner, M. N.; Wagner, S. R.; Wagoner, D. E.; Walker, D.; Walkowiak, W.; Wallom, D.; Wang, C. C.; Wang, C. H.; Wang, J.; Wang, J. G.; Wang, K.; Wang, L.; Wang, L. L.; Wang, P.; Wang, T. J.; Wang, W. F.; Wang, X. L.; Wang, Y. F.; Wappler, F. R.; Watanabe, M.; Watson, A. T.; Watson, J. E.; Watson, N. K.; Watt, M.; Weatherall, J. H.; Weaver, M.; Weber, T.; Wedd, R.; Wei, J. T.; Weidemann, A. W.; Weinstein, A. J. R.; Wenzel, W. A.; West, C. A.; West, C. G.; West, T. J.; White, E.; White, R. M.; Wicht, J.; Widhalm, L.; Wiechczynski, J.; Wienands, U.; Wilden, L.; Wilder, M.; Williams, D. C.; Williams, G.; Williams, J. C.; Williams, K. M.; Williams, M. I.; Willocq, S. Y.; Wilson, J. R.; Wilson, M. G.; Wilson, R. J.; Winklmeier, F.; Winstrom, L. O.; Winter, M. A.; Wisniewski, W. J.; Wittgen, M.; Wittlin, J.; Wittmer, W.; Wixted, R.; Woch, A.; Wogsland, B. J.; Won, E.; Wong, Q. K.; Wray, B. C.; Wren, A. C.; Wright, D. M.; Wu, C. H.; Wu, J.; Wu, S. L.; Wulsin, H. W.; Xella, S. M.; Xie, Q. L.; Xie, Y.; Xu, Z. Z.; Yéche, Ch.; Yamada, Y.; Yamaga, M.; Yamaguchi, A.; Yamaguchi, H.; Yamaki, T.; Yamamoto, H.; Yamamoto, N.; Yamamoto, R. K.; Yamamoto, S.; Yamanaka, T.; Yamaoka, H.; Yamaoka, J.; Yamaoka, Y.; Yamashita, Y.; Yamauchi, M.; Yan, D. S.; Yan, Y.; Yanai, H.; Yanaka, S.; Yang, H.; Yang, R.; Yang, S.; Yarritu, A. K.; Yashchenko, S.; Yashima, J.; Yasin, Z.; Yasu, Y.; Ye, S. W.; Yeh, P.; Yi, J. I.; Yi, K.; Yi, M.; Yin, Z. W.; Ying, J.; Yocky, G.; Yokoyama, K.; Yokoyama, M.; Yokoyama, T.; Yoshida, K.; Yoshida, M.; Yoshimura, Y.; Young, C. C.; Yu, C. X.; Yu, Z.; Yuan, C. Z.; Yuan, Y.; Yumiceva, F. X.; Yusa, Y.; Yushkov, A. N.; Yuta, H.; Zacek, V.; Zain, S. B.; Zallo, A.; Zambito, S.; Zander, D.; Zang, S. L.; Zanin, D.; Zaslavsky, B. G.; Zeng, Q. L.; Zghiche, A.; Zhang, B.; Zhang, J.; Zhang, J.; Zhang, L.; Zhang, L. M.; Zhang, S. Q.; Zhang, Z. P.; Zhao, H. W.; Zhao, M.; Zhao, Z. G.; Zheng, Y.; Zheng, Y. H.; Zheng, Z. P.; Zhilich, V.; Zhou, P.; Zhu, R. Y.; Zhu, Y. S.; Zhu, Z. M.; Zhulanov, V.; Ziegler, T.; Ziegler, V.; Zioulas, G.; Zisman, M.; Zito, M.; Zürcher, D.; Zwahlen, N.; Zyukova, O.; Živko, T.; Žontar, D.

2014-11-01

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.

Analysis of replication factories in human cells by super-resolution light microscopy

PubMed Central

2009-01-01

Background DNA replication in human cells is performed in discrete sub-nuclear locations known as replication foci or factories. These factories form in the nucleus during S phase and are sites of DNA synthesis and high local concentrations of enzymes required for chromatin replication. Why these structures are required, and how they are organised internally has yet to be identified. It has been difficult to analyse the structure of these factories as they are small in size and thus below the resolution limit of the standard confocal microscope. We have used stimulated emission depletion (STED) microscopy, which improves on the resolving power of the confocal microscope, to probe the structure of these factories at sub-diffraction limit resolution. Results Using immunofluorescent imaging of PCNA (proliferating cell nuclear antigen) and RPA (replication protein A) we show that factories are smaller in size (approximately 150 nm diameter), and greater in number (up to 1400 in an early S- phase nucleus), than is determined by confocal imaging. The replication inhibitor hydroxyurea caused an approximately 40% reduction in number and a 30% increase in diameter of replication factories, changes that were not clearly identified by standard confocal imaging. Conclusions These measurements for replication factory size now approach the dimensions suggested by electron microscopy. This agreement between these two methods, that use very different sample preparation and imaging conditions, suggests that we have arrived at a true measurement for the size of these structures. The number of individual factories present in a single nucleus that we measure using this system is greater than has been previously reported. This analysis therefore suggests that each replication factory contains fewer active replication forks than previously envisaged. PMID:20015367

BPM Breakdown Potential in the PEP-II B-factory Storage Ring Collider

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weathersby, Stephen; Novokhatski, Alexander; /SLAC

2010-02-10

High current B-Factory BPM designs incorporate a button type electrode which introduces a small gap between the button and the beam chamber. For achievable currents and bunch lengths, simulations indicate that electric potentials can be induced in this gap which are comparable to the breakdown voltage. This study characterizes beam induced voltages in the existing PEP-II storage ring collider BPM as a function of bunch length and beam current.

Design of a Communication Scheme in a Modern Factory in Accordance with the Standard of Industry 4.0

NASA Astrophysics Data System (ADS)

Halenár, Igor; Juhásová, Bohuslava; Juhás, Martin

2016-12-01

This article first describes the current state of the problem in the area of communication in modern factories. Next in the article is given a summary of the requirements that must be implemented for the possibility of establishing a compatible and safe communication system. In the final part of the article is given a proposal of communication model suitable for the implementation.

The simulation of air recirculation and fire/explosion phenomena within a semiconductor factory.

PubMed

I, Yet-Pole; Chiu, Yi-Long; Wu, Shi-Jen

2009-04-30

The semiconductor industry is the collection of capital-intensive firms that employ a variety of hazardous chemicals and engage in the design and fabrication of semiconductor devices. Owing to its processing characteristics, the fully confined structure of the fabrication area (fab) and the vertical airflow ventilation design restrict the applications of traditional consequence analysis techniques that are commonly used in other industries. The adverse situation also limits the advancement of a fire/explosion prevention design for the industry. In this research, a realistic model of a semiconductor factory with a fab, sub-fabrication area, supply air plenum, and return air plenum structures was constructed and the computational fluid dynamics algorithm was employed to simulate the possible fire/explosion range and its severity. The semiconductor factory has fan module units with high efficiency particulate air filters that can keep the airflow uniform within the cleanroom. This condition was modeled by 25 fans, three layers of porous ceiling, and one layer of porous floor. The obtained results predicted very well the real airflow pattern in the semiconductor factory. Different released gases, leak locations, and leak rates were applied to investigate their influence on the hazard range and severity. Common mitigation measures such as a water spray system and a pressure relief panel were also provided to study their potential effectiveness to relieve thermal radiation and overpressure hazards within a fab. The semiconductor industry can use this simulation procedure as a reference on how to implement a consequence analysis for a flammable gas release accident within an air recirculation cleanroom.

Constrained Response Surface Optimisation and Taguchi Methods for Precisely Atomising Spraying Process

NASA Astrophysics Data System (ADS)

Luangpaiboon, P.; Suwankham, Y.; Homrossukon, S.

2010-10-01

This research presents a development of a design of experiment technique for quality improvement in automotive manufacturing industrial. The quality of interest is the colour shade, one of the key feature and exterior appearance for the vehicles. With low percentage of first time quality, the manufacturer has spent a lot of cost for repaired works as well as the longer production time. To permanently dissolve such problem, the precisely spraying condition should be optimized. Therefore, this work will apply the full factorial design, the multiple regression, the constrained response surface optimization methods or CRSOM, and Taguchi's method to investigate the significant factors and to determine the optimum factor level in order to improve the quality of paint shop. Firstly, 2κ full factorial was employed to study the effect of five factors including the paint flow rate at robot setting, the paint levelling agent, the paint pigment, the additive slow solvent, and non volatile solid at spraying of atomizing spraying machine. The response values of colour shade at 15 and 45 degrees were measured using spectrophotometer. Then the regression models of colour shade at both degrees were developed from the significant factors affecting each response. Consequently, both regression models were placed into the form of linear programming to maximize the colour shade subjected to 3 main factors including the pigment, the additive solvent and the flow rate. Finally, Taguchi's method was applied to determine the proper level of key variable factors to achieve the mean value target of colour shade. The factor of non volatile solid was found to be one more additional factor at this stage. Consequently, the proper level of all factors from both experiment design methods were used to set a confirmation experiment. It was found that the colour shades, both visual at 15 and 45 angel of measurement degrees of spectrophotometer, were nearly closed to the target and the defective at quality gate was also reduced from 0.35 WDPV to 0.10 WDPV. This reveals that the objective of this research is met and this procedure can be used as quality improvement guidance for paint shop of automotive vehicle.

The Walking Interventions Through Texting (WalkIT) Trial: Rationale, Design, and Protocol for a Factorial Randomized Controlled Trial of Adaptive Interventions for Overweight and Obese, Inactive Adults

PubMed Central

Hurley, Jane C; Hollingshead, Kevin E; Todd, Michael; Jarrett, Catherine L; Tucker, Wesley J; Angadi, Siddhartha S

2015-01-01

Background Walking is a widely accepted and frequently targeted health promotion approach to increase physical activity (PA). Interventions to increase PA have produced only small improvements. Stronger and more potent behavioral intervention components are needed to increase time spent in PA, improve cardiometabolic risk markers, and optimize health. Objective Our aim is to present the rationale and methods from the WalkIT Trial, a 4-month factorial randomized controlled trial (RCT) in inactive, overweight/obese adults. The main purpose of the study was to evaluate whether intensive adaptive components result in greater improvements to adults’ PA compared to the static intervention components. Methods Participants enrolled in a 2x2 factorial RCT and were assigned to one of four semi-automated, text message–based walking interventions. Experimental components included adaptive versus static steps/day goals, and immediate versus delayed reinforcement. Principles of percentile shaping and behavioral economics were used to operationalize experimental components. A Fitbit Zip measured the main outcome: participants’ daily physical activity (steps and cadence) over the 4-month duration of the study. Secondary outcomes included self-reported PA, psychosocial outcomes, aerobic fitness, and cardiorespiratory risk factors assessed pre/post in a laboratory setting. Participants were recruited through email listservs and websites affiliated with the university campus, community businesses and local government, social groups, and social media advertising. Results This study has completed data collection as of December 2014, but data cleaning and preliminary analyses are still in progress. We expect to complete analysis of the main outcomes in late 2015 to early 2016. Conclusions The Walking Interventions through Texting (WalkIT) Trial will further the understanding of theory-based intervention components to increase the PA of men and women who are healthy, insufficiently active and are overweight or obese. WalkIT is one of the first studies focusing on the individual components of combined goal setting and reward structures in a factorial design to increase walking. The trial is expected to produce results useful to future research interventions and perhaps industry initiatives, primarily focused on mHealth, goal setting, and those looking to promote behavior change through performance-based incentives. Trial Registration ClinicalTrials.gov NCT02053259; https://clinicaltrials.gov/ct2/show/NCT02053259 (Archived by WebCite at http://www.webcitation.org/6b65xLvmg). PMID:26362511

Rationale and design of the ADDITION-Leicester study, a systematic screening programme and Randomised Controlled Trial of multi-factorial cardiovascular risk intervention in people with Type 2 Diabetes Mellitus detected by screening

PubMed Central

2010-01-01

Background Earlier diagnosis followed by multi-factorial cardiovascular risk intervention may improve outcomes in Type 2 Diabetes Mellitus (T2DM). Latent phase identification through screening requires structured, appropriately targeted population-based approaches. Providers responsible for implementing screening policy await evidence of clinical and cost effectiveness from randomised intervention trials in screen-detected T2DM cases. UK South Asians are at particularly high risk of abnormal glucose tolerance and T2DM. To be effective national screening programmes must achieve good coverage across the population by identifying barriers to the detection of disease and adapting to the delivery of earlier care. Here we describe the rationale and methods of a systematic community screening programme and randomised controlled trial of cardiovascular risk management within a UK multiethnic setting (ADDITION-Leicester). Design A single-blind cluster randomised, parallel group trial among people with screen-detected T2DM comparing a protocol driven intensive multi-factorial treatment with conventional care. Methods ADDITION-Leicester consists of community-based screening and intervention phases within 20 general practices coordinated from a single academic research centre. Screening adopts a universal diagnostic approach via repeated 75g-Oral Glucose Tolerance Tests within an eligible non-diabetic population of 66,320 individuals aged 40-75 years (25-75 years South Asian). Volunteers also provide detailed medical and family histories; complete health questionnaires, undergo anthropometric measures, lipid profiling and a proteinuria assessment. Primary outcome is reduction in modelled Coronary Heart Disease (UKPDS CHD) risk at five years. Seven thousand (30% of South Asian ethnic origin) volunteers over three years will be recruited to identify a screen-detected T2DM cohort (n = 285) powered to detected a 6% relative difference (80% power, alpha 0.05) between treatment groups at one year. Randomisation will occur at practice-level with newly diagnosed T2DM cases receiving either conventional (according to current national guidelines) or intensive (algorithmic target-driven multi-factorial cardiovascular risk intervention) treatments. Discussion ADDITION-Leicester is the largest multiethnic (targeting >30% South Asian recruitment) community T2DM and vascular risk screening programme in the UK. By assessing feasibility and efficacy of T2DM screening, it will inform national disease prevention policy and contribute significantly to our understanding of the health care needs of UK South Asians. Trial registration Clinicaltrial.gov (NCT00318032). PMID:20170482

de novo computational enzyme design.

PubMed

Zanghellini, Alexandre

2014-10-01

Recent advances in systems and synthetic biology as well as metabolic engineering are poised to transform industrial biotechnology by allowing us to design cell factories for the sustainable production of valuable fuels and chemicals. To deliver on their promises, such cell factories, as much as their brick-and-mortar counterparts, will require appropriate catalysts, especially for classes of reactions that are not known to be catalyzed by enzymes in natural organisms. A recently developed methodology, de novo computational enzyme design can be used to create enzymes catalyzing novel reactions. Here we review the different classes of chemical reactions for which active protein catalysts have been designed as well as the results of detailed biochemical and structural characterization studies. We also discuss how combining de novo computational enzyme design with more traditional protein engineering techniques can alleviate the shortcomings of state-of-the-art computational design techniques and create novel enzymes with catalytic proficiencies on par with natural enzymes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Fractional Factorial Design Study on the Performance of GAC-Enhanced Electrocoagulation Process Involved in Color Removal from Dye Solutions.

PubMed

Secula, Marius Sebastian; Cretescu, Igor; Cagnon, Benoit; Manea, Liliana Rozemarie; Stan, Corneliu Sergiu; Breaban, Iuliana Gabriela

2013-07-10

The aim of this study was to determine the effects of main factors and interactions on the color removal performance from dye solutions using the electrocoagulation process enhanced by adsorption on Granular Activated Carbon (GAC). In this study, a mathematical approach was conducted using a two-level fractional factorial design ( FFD ) for a given dye solution. Three textile dyes: Acid Blue 74, Basic Red 1, and Reactive Black 5 were used. Experimental factors used and their respective levels were: current density (2.73 or 27.32 A/m²), initial pH of aqueous dye solution (3 or 9), electrocoagulation time (20 or 180 min), GAC dose (0.1 or 0.5 g/L), support electrolyte (2 or 50 mM), initial dye concentration (0.05 or 0.25 g/L) and current type (Direct Current- DC or Alternative Pulsed Current- APC ). GAC-enhanced electrocoagulation performance was analyzed statistically in terms of removal efficiency, electrical energy, and electrode material consumptions, using modeling polynomial equations. The statistical significance of GAC dose level on the performance of GAC enhanced electrocoagulation and the experimental conditions that favor the process operation of electrocoagulation in APC regime were determined. The local optimal experimental conditions were established using a multi-objective desirability function method.

Synthesis and factorial design applied to a novel chitosan/sodium polyphosphate nanoparticles via ionotropic gelation as an RGD delivery system.

PubMed

Kiilll, Charlene Priscila; Barud, Hernane da Silva; Santagneli, Sílvia Helena; Ribeiro, Sidney José Lima; Silva, Amélia M; Tercjak, Agnieszka; Gutierrez, Junkal; Pironi, Andressa Maria; Gremião, Maria Palmira Daflon

2017-02-10

Chitosan nanoparticles have been extensively studied for both drug and protein/peptide delivery. The aim of this study was to develop an optimized chitosan nanoparticle, by ionotropic gelation method, using 3 2 full factorial design with a novel polyanion, sodium polyphosphate, well known under the trade name Graham salt. The effects of these parameters on the particle size, zeta potential, and morphology and association efficiency were investigated. The optimized nanoparticles showed an estimated size of 166.20±1.95nm, a zeta potential of 38.7±1.2mV and an efficacy of association of 97.0±2.4%. The Atomic Force Microscopy (AFM) and Scanning Electronic Microscopy (SEM) revealed spherical nanoparticles with uniform size. Molecular interactions among the components of the nanoparticles and peptide were evaluated by Fourier Transform Infrared Spectra (FTIR) and Differential Scanning Calorimetry (DSC). The obtained results indicated that, the developed nanoparticles demonstrated high biocompatible, revealing no or low toxicity in the human cancer cell line (Caco-2). In conclusion, this work provides parameters that contribute to production of chitosan nanoparticles and sodium polyphosphate with desirable size, biocompatible and enabling successful use for protein/peptides delivery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Fractional Factorial Design Study on the Performance of GAC-Enhanced Electrocoagulation Process Involved in Color Removal from Dye Solutions

PubMed Central

Secula, Marius Sebastian; Cretescu, Igor; Cagnon, Benoit; Manea, Liliana Rozemarie; Stan, Corneliu Sergiu; Breaban, Iuliana Gabriela

2013-01-01

The aim of this study was to determine the effects of main factors and interactions on the color removal performance from dye solutions using the electrocoagulation process enhanced by adsorption on Granular Activated Carbon (GAC). In this study, a mathematical approach was conducted using a two-level fractional factorial design (FFD) for a given dye solution. Three textile dyes: Acid Blue 74, Basic Red 1, and Reactive Black 5 were used. Experimental factors used and their respective levels were: current density (2.73 or 27.32 A/m2), initial pH of aqueous dye solution (3 or 9), electrocoagulation time (20 or 180 min), GAC dose (0.1 or 0.5 g/L), support electrolyte (2 or 50 mM), initial dye concentration (0.05 or 0.25 g/L) and current type (Direct Current—DC or Alternative Pulsed Current—APC). GAC-enhanced electrocoagulation performance was analyzed statistically in terms of removal efficiency, electrical energy, and electrode material consumptions, using modeling polynomial equations. The statistical significance of GAC dose level on the performance of GAC enhanced electrocoagulation and the experimental conditions that favor the process operation of electrocoagulation in APC regime were determined. The local optimal experimental conditions were established using a multi-objective desirability function method. PMID:28811405

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

Application of quality by design concepts in the development of fluidized bed granulation and tableting processes.

PubMed

Djuris, Jelena; Medarevic, Djordje; Krstic, Marko; Djuric, Zorica; Ibric, Svetlana

2013-06-01

This study illustrates the application of experimental design and multivariate data analysis in defining design space for granulation and tableting processes. According to the quality by design concepts, critical quality attributes (CQAs) of granules and tablets, as well as critical parameters of granulation and tableting processes, were identified and evaluated. Acetaminophen was used as the model drug, and one of the study aims was to investigate the possibility of the development of immediate- or extended-release acetaminophen tablets. Granulation experiments were performed in the fluid bed processor using polyethylene oxide polymer as a binder in the direct granulation method. Tablets were compressed in the laboratory excenter tablet press. The first set of experiments was organized according to Plackett-Burman design, followed by the full factorial experimental design. Principal component analysis and partial least squares regression were applied as the multivariate analysis techniques. By using these different methods, CQAs and process parameters were identified and quantified. Furthermore, an in-line method was developed to monitor the temperature during the fluidized bed granulation process, to foresee possible defects in granules CQAs. Various control strategies that are based on the process understanding and assure desired quality attributes of the product are proposed. Copyright © 2013 Wiley Periodicals, Inc.

Child Protection Decision Making: A Factorial Analysis Using Case Vignettes

ERIC Educational Resources Information Center

Stokes, Jacqueline; Schmidt, Glen

2012-01-01

This study explored decision making by child protection social workers in the province of British Columbia, Canada. A factorial survey method was used in which case vignettes were constructed by randomly assigning a number of key characteristics associated with decision making in child protection. Child protection social workers (n = 118) assessed…

Combustion of liquid paint wastes in fluidized bed boiler as element of waste management system in the paint factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soko, W.A.; Biaecka, B.

1998-12-31

In this paper the solution to waste problems in the paint industry is presented by describing their combustion in a fluidized bed boiler as a part of the waste management system in the paint factory. Based on the Cleaner Production idea and concept of integration of design process with a future exploitation of equipment, some modifications of the waste management scheme in the factory are discussed to reduce the quantity of toxic wastes. To verify this concept combustion tests of paint production wastes and cocombustion of paint wastes with coal in an adopted industrial boiler were done. Results of thesemore » tests are presented in the paper.« less

D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

EPA Science Inventory

Traditional factorial designs for evaluating interactions among chemicals in a mixture are prohibitive when the number of chemicals is large. However, recent advances in statistically-based experimental design have made it easier to evaluate interactions involving many chemicals...

Application of Analytical Quality by Design concept for bilastine and its degradation impurities determination by hydrophilic interaction liquid chromatographic method.

PubMed

Terzić, Jelena; Popović, Igor; Stajić, Ana; Tumpa, Anja; Jančić-Stojanović, Biljana

2016-06-05

This paper deals with the development of hydrophilic interaction liquid chromatographic (HILIC) method for the analysis of bilastine and its degradation impurities following Analytical Quality by Design approach. It is the first time that the method for bilastine and its impurities is proposed. The main objective was to identify the conditions where an adequate separation in minimal analysis duration could be achieved within a robust region. Critical process parameters which have the most influence on method performance were defined as acetonitrile content in the mobile phase, pH of the aqueous phase and ammonium acetate concentration in the aqueous phase. Box-Behnken design was applied for establishing a relationship between critical process parameters and critical quality attributes. The defined mathematical models and Monte Carlo simulations were used to identify the design space. Fractional factorial design was applied for experimental robustness testing and the method is validated to verify the adequacy of selected optimal conditions: the analytical column Luna(®) HILIC (100mm×4.6mm, 5μm particle size); mobile phase consisted of acetonitrile-aqueous phase (50mM ammonium acetate, pH adjusted to 5.3 with glacial acetic acid) (90.5:9.5, v/v); column temperature 30°C, mobile phase flow rate 1mLmin(-1), wavelength of detection 275nm. Copyright © 2016 Elsevier B.V. All rights reserved.

Formulation design of a highly hygroscopic drug (pyridostigmine bromide) for its hygroscopic character improvement and investigation of in vitro/in vivo dissolution properties.

PubMed

Huang, Yuh-Tyng; Tsai, Tong-Rong; Cheng, Chun-Jen; Cham, Thau-Ming; Lai, Tsun-Fwu; Chuo, Wen-Ho

2007-04-01

Pyridostigmine bromide (PB) sustained-release (SR) pellets were developed by extrusion-spheronization and fluid-bed methods using Taguchi experimental and 2(3) full factorial design. In vitro studies, the 2(3) full factorial design was utilized to search for the optimal SR pellets with specific release rate at different time intervals (release percent of 2, 6, 12, and 24 hr were 6.24, 33.48, 75.18, and 95.26%, respectively) which followed a zero-order mechanism (n=0.93). The results of moisture absorption by Karl Fischer has shown the optimum SR pellets at 25 degrees C/60% RH, 30 degrees C/65% RH, and 40 degrees C/75% RH chambers from 1 hr-4 weeks, attributing that the moisture absorption was not significantly increased. In the in vivo study, the results of the bioavailability data showed the Tmax (from 0.65+/-0.082 hr-4.82+/-2.12 hr) and AUC0-30 hr (from 734.88+/-230.68 ng/mL.hr-1454.86+/-319.28 ng/mL.hr) were prolonged and increased, as well as Cmax (from 251.87+/-27.51 ng/mL-115.08+/-14.87 ng/mL) was decreased for optimum SR-PB pellets when compared with commercial immediate-release (IR) tablets. Furthermore, a good linear regression relationship (r=0.9943) was observed between the fraction dissolution and fraction absorption for the optimum SR pellets. In this study, the formulation design not only improved the hygroscopic character of PB but also achieved the SR effect.

Resolution V fractional factorial design for screening of factors affecting weakly basic drugs liposomal systems.

PubMed

Nageeb El-Helaly, Sara; Habib, Basant A; Abd El-Rahman, Mohamed K

2018-07-01

This study aims to investigate factors affecting weakly basic drugs liposomal systems. Resolution V fractional factorial design (2 V 5-1 ) is used as an example of screening designs that would better be used as a wise step before proceeding with detailed factors effects or optimization studies. Five factors probable to affect liposomal systems of weakly basic drugs were investigated using Amisulpride as a model drug. Factors studied were; A: Preparation technique B: Phosphatidyl choline (PhC) amount (mg) C: Cholesterol: PhC molar ratio, D: Hydration volume (ml) and E: Sonication type. Levels investigated were; Ammonium sulphate-pH gradient technique or Transmembrane zinc chelation-pH gradient technique, 200 or 400 mg, 0 or 0.5, 10 or 20 ml and bath or probe sonication for A, B, C, D and E respectively. Responses measured were Particle size (PS) (nm), Zeta potential (ZP) (mV) and Entrapment efficiency percent (EE%). Ion selective electrode was used as a novel method for measuring unentrapped drug concentration and calculating entrapment efficiency without the need for liposomal separation. Factors mainly affecting the studied responses were Cholesterol: PhC ratio and hydration volume for PS, preparation technique for ZP and preparation technique and hydration volume for EE%. The applied 2 V 5-1 design enabled the use of only 16 trial combinations for screening the influence of five factors on weakly basic drugs liposomal systems. This clarifies the value of the use of screening experiments before extensive investigation of certain factors in detailed optimization studies. Copyright © 2018 Elsevier B.V. All rights reserved.

Stud Walls With Continuous Exterior Insulation for Factory Built Housing: New York, New York (Fact Sheet), NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet themore » thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research - stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.« less

Technology Solutions Case Study: Stud Walls with Continuous Exterior Insulation for Factory Built Housing

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet themore » thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research — stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.« less

Torsemide Fast Dissolving Tablets: Development, Optimization Using Box-Bhenken Design and Response Surface Methodology, In Vitro Characterization, and Pharmacokinetic Assessment.

PubMed

El-Shenawy, Ahmed A; Ahmed, Mahmoud M; Mansour, Heba F; Abd El Rasoul, Saleh

2017-08-01

The present study planed to develop new fast dissolving tablets (FDTs) of torsemide. Solid dispersions (SDs) of torsemide and sorbitol (3:1) or polyvinylpyrrolidone (PVP) k25 were prepared. The prepared SDs were evaluated for in-vitro dissolution. Fourier transform infrared spectroscopy and differential scanning calorimetry for SDs revealed no drug/excipient interactions and transformation of torsemide to the amorphous form. Torsemide/sorbitol SD was selected for formulation of torsemide FDTs by direct compression method. Box-Bhenken factorial design was employed to design 15 formulations using croscarmellose sodium and crospovidone at different concentrations. The response surface methodology was used to analyze the effect of changing these concentrations (independent variables) on disintegration time (Y 1 ), percentage friability (Y 2 ), and amount torsemide released at 10 min. The physical mixtures of torsemide and the used excipients were evaluated for angle of repose, Hausner's ratio, and Carr's index. The prepared FDTs tablets were evaluated for wetting and disintegration time, weight variation, drug content, percentage friability, thickness, hardness, and in vitro release. Based on the in-vitro results and factorial design characterization, F10 and F7 were selected for bioavailability studies following administration to Albino New Zealand rabbits. They showed significantly higher C max and (AUC 0-12 ) and shorter T max than those obtained after administration of the corresponding ordinary commercial Torseretic ® tablets. Stability study was conducted for F10 that showed good stability upon storage at 30°C/75% RH and 40°C/75% RH for 3 months.

Treating Intractable Post Amputation Phantom Limb Pain with Ambulatory Continuous Peripheral Nerve Blocks

DTIC Science & Technology

2018-01-01

author(s) and should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation...hurricane that hit Puerto Rico this last summer knocked out the factory that makes the local anesthetic used in this study—ropivacaine—and, so our enrollment...was halted because ropivacaine cannot be purchased in the United States. It is unclear when the factory will begin producing ropivacaine again; but

Investigation of the impact of trace elements on anaerobic volatile fatty acid degradation using a fractional factorial experimental design.

PubMed

Jiang, Ying; Zhang, Yue; Banks, Charles; Heaven, Sonia; Longhurst, Philip

2017-11-15

The requirement of trace elements (TE) in anaerobic digestion process is widely documented. However, little is understood regarding the specific requirement of elements and their critical concentrations under different operating conditions such as substrate characterisation and temperature. In this study, a flask batch trial using fractional factorial design is conducted to investigate volatile fatty acids (VFA) anaerobic degradation rate under the influence of the individual and combined effect of six TEs (Co, Ni, Mo, Se, Fe and W). The experiment inoculated with food waste digestate, spiked with sodium acetate and sodium propionate both to 10 g/l. This is followed by the addition of a selection of the six elements in accordance with a 2 6-2 fractional factorial principle. The experiment is conducted in duplicate and the degradation of VFA is regularly monitored. Factorial effect analysis on the experimental results reveals that within these experimental conditions, Se has a key role in promoting the degradation rates of both acetic and propionic acids; Mo and Co are found to have a modest effect on increasing propionic acid degradation rate. It is also revealed that Ni shows some inhibitory effects on VFA degradation, possibly due to its toxicity. Additionally, regression coefficients for the main and second order effects are calculated to establish regression models for VFA degradation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Car Assembly Line Efficiency Improvement by Lean Principle

NASA Astrophysics Data System (ADS)

Sawassalung, Suwalee; Chutima, Parames

2017-06-01

This research aimed to increase the efficiency of actual working time to compare to design standard time ratio (DSTR) as per analysing process of Lean System of the assembly line in a car manufacturer in Thailand. Currently, the case study factory and its group of factories, which have many branches all over the world, have competed with each other on quality, delivered time and production cost. The production cost which can reduce without affecting quality and acceptable by clients is the manpower cost. The index of competition is DSTR. The factory now has DSTR of 6.13 and DSTR of the assembly department is 4.24 which is very high comparing to other departments. The low DSTR indicates that the factory has good quality. The ways to solve the problem are to apply the following tools, i.e. Lean principle, Value Stream Mapping (VSM), Waste Analysis and ECRS. After implementing the above tools, the results showed that DSTR decreased from 4.24 to 4.06 or 4.25%.

A new programming metaphor for image processing procedures

NASA Technical Reports Server (NTRS)

Smirnov, O. M.; Piskunov, N. E.

1992-01-01

Most image processing systems, besides an Application Program Interface (API) which lets users write their own image processing programs, also feature a higher level of programmability. Traditionally, this is a command or macro language, which can be used to build large procedures (scripts) out of simple programs or commands. This approach, a legacy of the teletypewriter has serious drawbacks. A command language is clumsy when (and if! it attempts to utilize the capabilities of a multitasking or multiprocessor environment, it is but adequate for real-time data acquisition and processing, it has a fairly steep learning curve, and the user interface is very inefficient,. especially when compared to a graphical user interface (GUI) that systems running under Xll or Windows should otherwise be able to provide. ll these difficulties stem from one basic problem: a command language is not a natural metaphor for an image processing procedure. A more natural metaphor - an image processing factory is described in detail. A factory is a set of programs (applications) that execute separate operations on images, connected by pipes that carry data (images and parameters) between them. The programs function concurrently, processing images as they arrive along pipes, and querying the user for whatever other input they need. From the user's point of view, programming (constructing) factories is a lot like playing with LEGO blocks - much more intuitive than writing scripts. Focus is on some of the difficulties of implementing factory support, most notably the design of an appropriate API. It also shows that factories retain all the functionality of a command language (including loops and conditional branches), while suffering from none of the drawbacks outlined above. Other benefits of factory programming include self-tuning factories and the process of encapsulation, which lets a factory take the shape of a standard application both from the system and the user's point of view, and thus be used as a component of other factories. A bare-bones prototype of factory programming was implemented under the PcIPS image processing system, and a complete version (on a multitasking platform) is under development.

ED-WAVE tool design approach: Case of a textile wastewater treatment plant in Blantyre, Malawi

NASA Astrophysics Data System (ADS)

Chipofya, V.; Kraslawski, A.; Avramenko, Y.

The ED-WAVE tool is a PC based package for imparting training on wastewater treatment technologies. The system consists of four modules viz. Reference Library, Process Builder, Case Study Manager, and Treatment Adviser. The principles of case-based design and case-based reasoning as applied in the ED-WAVE tool are utilised in this paper to evaluate the design approach of the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory, Blantyre, Malawi. The case being compared with MDW&S in the ED-WAVE tool is Textile Case 4 in Sri Lanka (2003). Equalisation, coagulation and rotating biological contactors is the sequencing of treatment units at Textile Case 4 in Sri Lanka. Screening, oxidation ditches and sedimentation is the sequencing of treatment units at MDW&S textile and garments factory. The study suggests that aerobic biological treatment is necessary in the treatment of wastewater from a textile and garments factory. MDW&S incorporates a sedimentation process which is necessary for the removal of settleable matter before the effluent is discharged to the municipal wastewater treatment plant. The study confirmed the practical use of the ED-WAVE tool in the design of wastewater treatment systems, where after encountering a new situation; already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects.

Optimization of the Ion Source-Mass Spectrometry Parameters in Non-Steroidal Anti-Inflammatory and Analgesic Pharmaceuticals Analysis by a Design of Experiments Approach

NASA Astrophysics Data System (ADS)

Paíga, Paula; Silva, Luís M. S.; Delerue-Matos, Cristina

2016-10-01

The flow rates of drying and nebulizing gas, heat block and desolvation line temperatures and interface voltage are potential electrospray ionization parameters as they may enhance sensitivity of the mass spectrometer. The conditions that give higher sensitivity of 13 pharmaceuticals were explored. First, Plackett-Burman design was implemented to screen significant factors, and it was concluded that interface voltage and nebulizing gas flow were the only factors that influence the intensity signal for all pharmaceuticals. This fractionated factorial design was projected to set a full 22 factorial design with center points. The lack-of-fit test proved to be significant. Then, a central composite face-centered design was conducted. Finally, a stepwise multiple linear regression and subsequently an optimization problem solving were carried out. Two main drug clusters were found concerning the signal intensities of all runs of the augmented factorial design. p-Aminophenol, salicylic acid, and nimesulide constitute one cluster as a result of showing much higher sensitivity than the remaining drugs. The other cluster is more homogeneous with some sub-clusters comprising one pharmaceutical and its respective metabolite. It was observed that instrumental signal increased when both significant factors increased with maximum signal occurring when both codified factors are set at level +1. It was also found that, for most of the pharmaceuticals, interface voltage influences the intensity of the instrument more than the nebulizing gas flowrate. The only exceptions refer to nimesulide where the relative importance of the factors is reversed and still salicylic acid where both factors equally influence the instrumental signal.

Deep eutectic solvent-based valorization of spent coffee grounds.

PubMed

Yoo, Da Eun; Jeong, Kyung Min; Han, Se Young; Kim, Eun Mi; Jin, Yan; Lee, Jeongmi

2018-07-30

Spent coffee grounds (SCGs) are viewed as a valuable resource for useful bioactive compounds, such as chlorogenic acids and flavonoids, and we suggest an eco-friendly and efficient valorization method. A series of choline chloride-based deep eutectic solvents (DESs) were tested as green extraction solvents for use with ultrasound-assisted extraction. Extraction efficiency was evaluated based on total phenolic content (TPC), total flavonoid content, total chlorogenic acids, and/or anti-oxidant activity. A binary DES named HC-6, which was composed of 1,6-hexanediol:choline chloride (molar ratio 7:1) was designed to produce the highest efficiency. Experimental conditions were screened and optimized for maximized efficiency using a two-level fractional factorial design and a central composite design, respectively. As a result, the proposed method presented significantly enhanced TPC and anti-oxidant activity. In addition, phenolic compounds could be easily recovered from extracts at high recovery yields (>90%) by adsorption chromatography. Copyright © 2018 Elsevier Ltd. All rights reserved.

Establishing a Mathematical Equations and Improving the Production of L-tert-Leucine by Uniform Design and Regression Analysis.

PubMed

Jiang, Wei; Xu, Chao-Zhen; Jiang, Si-Zhi; Zhang, Tang-Duo; Wang, Shi-Zhen; Fang, Bai-Shan

2017-04-01

L-tert-Leucine (L-Tle) and its derivatives are extensively used as crucial building blocks for chiral auxiliaries, pharmaceutically active ingredients, and ligands. Combining with formate dehydrogenase (FDH) for regenerating the expensive coenzyme NADH, leucine dehydrogenase (LeuDH) is continually used for synthesizing L-Tle from α-keto acid. A multilevel factorial experimental design was executed for research of this system. In this work, an efficient optimization method for improving the productivity of L-Tle was developed. And the mathematical model between different fermentation conditions and L-Tle yield was also determined in the form of the equation by using uniform design and regression analysis. The multivariate regression equation was conveniently implemented in water, with a space time yield of 505.9 g L -1  day -1 and an enantiomeric excess value of >99 %. These results demonstrated that this method might become an ideal protocol for industrial production of chiral compounds and unnatural amino acids such as chiral drug intermediates.

Direct determination of danofloxacin and flumequine in milk by use of fluorescence spectrometry in combination with partial least-squares calibration.

PubMed

Murillo Pulgarín, J A; Alañón Molina, A; Boras, N

2013-03-20

A new method for the simultaneous determination of danofloxacin and flumequine in milk samples was developed by using the nonlinear variable-angle synchronous fluorescence technique to acquire data and a partial least-squares chemometric algorithm to process them. A calibration set of standard samples was designed by combination of a factorial design with two levels per factor and a central star design. Whey was used as the third component of the calibration matrix. In order to assess the goodness of the proposed method, a prediction set of 11 synthetic samples was analyzed, obtaining recovery percentages between 96.1% and 104.0%. Limits of detection, calculated by means of a new criterion, were 0.90 and 12.4 ng mL(-1) for danofloxacin and flumequine, respectively. Finally, the simultaneous determination of both fluoroquinoles in milk samples containing the analytes was successfully carried out, obtaining an average recovery percentage of 99.3 ± 4.4 for danofloxacin and 100.7 ± 4.4.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, David; Snopok, Pavel; Alexahin, Yuri

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a Φ-δE rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both μ + and μ - transversely andmore » longitudinally. Finally, the status of the design is presented and variations are discussed.« less

Process parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning

NASA Astrophysics Data System (ADS)

Nonato, Renato C.; Morales, Ana R.; Rocha, Mateus C.; Nista, Silvia V. G.; Mei, Lucia H. I.; Bonse, Baltus C.

2017-01-01

Zinc oxide (ZnO) nanofibers were prepared by electrospinning under different conditions using a solution of poly(vinyl alcohol) and zinc acetate as precursor. A 23 factorial design was made to study the influence of the process parameters in the electrospinning (collector distance, flow rate and voltage), and a 22 factorial design was made to study the influence of the calcination process (time and temperature). SEM images were made to analyze the fiber morphology before and after calcination process, and the images were made to measure the nanofiber diameter. X-ray diffraction was made to analyze the total precursor conversion to ZnO and the elimination of the polymeric carrier.

Cloud-based robot remote control system for smart factory

NASA Astrophysics Data System (ADS)

Wu, Zhiming; Li, Lianzhong; Xu, Yang; Zhai, Jingmei

2015-12-01

With the development of internet technologies and the wide application of robots, there is a prospect (trend/tendency) of integration between network and robots. A cloud-based robot remote control system over networks for smart factory is proposed, which enables remote users to control robots and then realize intelligent production. To achieve it, a three-layer system architecture is designed including user layer, service layer and physical layer. Remote control applications running on the cloud server is developed on Microsoft Azure. Moreover, DIV+ CSS technologies are used to design human-machine interface to lower maintenance cost and improve development efficiency. Finally, an experiment is implemented to verify the feasibility of the program.

Preconcentration and determination of ceftazidime in real samples using dispersive liquid-liquid microextraction and high-performance liquid chromatography with the aid of experimental design.

PubMed

Razmi, Rasoul; Shahpari, Behrouz; Pourbasheer, Eslam; Boustanifar, Mohammad Hasan; Azari, Zhila; Ebadi, Amin

2016-11-01

A rapid and simple method for the extraction and preconcentration of ceftazidime in aqueous samples has been developed using dispersive liquid-liquid microextraction followed by high-performance liquid chromatography analysis. The extraction parameters, such as the volume of extraction solvent and disperser solvent, salt effect, sample volume, centrifuge rate, centrifuge time, extraction time, and temperature in the dispersive liquid-liquid microextraction process, were studied and optimized with the experimental design methods. Firstly, for the preliminary screening of the parameters the taguchi design was used and then, the fractional factorial design was used for significant factors optimization. At the optimum conditions, the calibration curves for ceftazidime indicated good linearity over the range of 0.001-10 μg/mL with correlation coefficients higher than the 0.98, and the limits of detection were 0.13 and 0.17 ng/mL, for water and urine samples, respectively. The proposed method successfully employed to determine ceftazidime in water and urine samples and good agreement between the experimental data and predictive values has been achieved. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Internal pilots for a class of linear mixed models with Gaussian and compound symmetric data

PubMed Central

Gurka, Matthew J.; Coffey, Christopher S.; Muller, Keith E.

2015-01-01

SUMMARY An internal pilot design uses interim sample size analysis, without interim data analysis, to adjust the final number of observations. The approach helps to choose a sample size sufficiently large (to achieve the statistical power desired), but not too large (which would waste money and time). We report on recent research in cerebral vascular tortuosity (curvature in three dimensions) which would benefit greatly from internal pilots due to uncertainty in the parameters of the covariance matrix used for study planning. Unfortunately, observations correlated across the four regions of the brain and small sample sizes preclude using existing methods. However, as in a wide range of medical imaging studies, tortuosity data have no missing or mistimed data, a factorial within-subject design, the same between-subject design for all responses, and a Gaussian distribution with compound symmetry. For such restricted models, we extend exact, small sample univariate methods for internal pilots to linear mixed models with any between-subject design (not just two groups). Planning a new tortuosity study illustrates how the new methods help to avoid sample sizes that are too small or too large while still controlling the type I error rate. PMID:17318914

Asphaltic concrete overlays of rigid and flexible pavements : final report.

DOT National Transportation Integrated Search

1980-10-01

This study evaluated the effect of a given thickness of asphaltic concrete overlay in rehabilitating 53 test sections conforming to the experiment design. This factorial design specified various levels of traffic intensity and overlay thickness for b...

The E Sibling Project – exploratory randomised controlled trial of an online multi-component psychoeducational intervention for siblings of individuals with first episode psychosis

PubMed Central

2013-01-01

Background Siblings of individuals with first episode psychosis are natural partners to promote service users’ recovery and are themselves vulnerable to mental ill health due to the negative impact of psychosis within the family. This study aims to develop and undertake a preliminary evaluation of the efficacy of an online multi-component psychoeducational intervention for siblings of individuals with first episode psychosis. The impetus for the intervention arose from siblings' expressed needs for peer support and information on psychosis, coping and management strategies for common symptoms and ways to promote recovery. Methods/Design The project design draws on the Medical Research Council framework for the design and evaluation of complex interventions. Mixed methods comprising collection of qualitative focus group data, systematic review and expert advisory group consultation are used to develop the theoretical basis for and design of the intervention. This protocol focuses on the modelling and piloting phase which uses a randomised controlled trial with factorial design to test the efficacy of the intervention. Outcome data on participants’ mental wellbeing, knowledge, perceived self-efficacy and experiences of caregiving will be assessed at baseline, at end of the intervention (10 weeks later) and at 10 week follow-up. In addition, a post-intervention semi-structured interview with 20% of the participants will explore their experiences and acceptability of the intervention. Discussion This multi-component online psychoeducational intervention aims to enhance siblings' knowledge about psychosis and their coping capacity, thus potentially improving their own mental wellbeing and promoting their contribution to service users’ recovery. The factorial design randomised controlled trial with a supplementary process evaluation using semi-structured interviews and usage-monitoring will collect preliminary evidence of efficacy, feasibility and acceptability, as well as feedback about the barriers and strategies to using such an innovative resource. The RCT will provide data for estimating the likely effect size of the intervention on outcomes for siblings and inform the development of a definitive future trial. Trial registration Trial registration: ISRCTN01416694 PMID:23622123

Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments.

PubMed

Spasojević Brkić, Vesna K; Veljković, Zorica A; Golubović, Tamara; Brkić, Aleksandar Dj; Kosić Šotić, Ivana

2016-01-01

Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data and provide additional recommendations for design. In this paper, dimensioning of the crane cabin interior space was carried out using a sample of 64 crane operators' anthropometric measurements, in the Republic of Serbia, by measuring workspace with 10 parameters using nine measured anthropometric data from each crane operator. This paper applies experiments run via full factorial designs using a combined traditional and Taguchi approach. The experiments indicated which design parameters are influenced by which anthropometric measurements and to what degree. The results are expected to be of use for crane cabin designers and should assist them to design a cabin that may lead to less strenuous sitting postures and fatigue for operators, thus improving safety and accident prevention.

Translational Research in South Africa: Evaluating Implementation Quality Using a Factorial Design

PubMed Central

Smith, Edward A.; Collins, Linda M.; Graham, John W.; Lai, Mary; Wegner, Lisa; Vergnani, Tania; Matthews, Catherine; Jacobs, Joachim

2012-01-01

Background HealthWise South Africa: Life Skills for Adolescents (HW) is an evidence-based substance use and sexual risk prevention program that emphasizes the positive use of leisure time. Since 2000, this program has evolved from pilot testing through an efficacy trial involving over 7,000 youth in the Cape Town area. Beginning in 2011, through 2015, we are undertaking a new study that expands HW to all schools in the Metro South Education District. Objective This paper describes a research study designed in partnership with our South African collaborators that examines three factors hypothesized to affect the quality and fidelity of HW implementation: enhanced teacher training; teacher support, structure and supervision; and enhanced school environment. Methods Teachers and students from 56 schools in the Cape Town area will participate in this study. Teacher observations are the primary means of collecting data on factors affecting implementation quality. These factors address the practical concerns of teachers and schools related to likelihood of use and cost-effectiveness, and are hypothesized to be “active ingredients” related to high-quality program implementation in real-world settings. An innovative factorial experimental design was chosen to enable estimation of the individual effect of each of the three factors. Results Because this paper describes the conceptualization of our study, results are not yet available. Conclusions The results of this study may have both substantive and methodological implications for advancing Type 2 translational research. PMID:22707870

Methods for characterizing plant fibers.

PubMed

Cruthers, Natasha; Carr, Debra; Niven, Brian; Girvan, Elizabeth; Laing, Raechel

2005-08-01

The effectiveness of different microscopy techniques for measuring the dimensions of ultimate fibers from harakeke (Phormium tenax, New Zealand flax) was investigated using a factorial experimental design. Constant variables were geographical location, location of specimens along the leaf, season (winter), individual plant, a fourth leaf from a north-facing fan, age of plant, and cultivars (two). Experimental variables were microscopy techniques and measurement axis. Measurements of width and length of harakeke ultimate fibers depended on the microscopic preparation/technique used as well as the cultivar examined. The best methods were (i) transverse sections of leaf specimens 4 microm thick, embedded in Paraplast and observed using light microscopy, and (ii) nonfixed ultimate fibers observed using scanning electron microscopy. (c) 2005 Wiley-Liss, Inc.

An efficient approach to understanding and predicting the effects of multiple task characteristics on performance.

PubMed

Richardson, Miles

2017-04-01

In ergonomics there is often a need to identify and predict the separate effects of multiple factors on performance. A cost-effective fractional factorial approach to understanding the relationship between task characteristics and task performance is presented. The method has been shown to provide sufficient independent variability to reveal and predict the effects of task characteristics on performance in two domains. The five steps outlined are: selection of performance measure, task characteristic identification, task design for user trials, data collection, regression model development and task characteristic analysis. The approach can be used for furthering knowledge of task performance, theoretical understanding, experimental control and prediction of task performance. Practitioner Summary: A cost-effective method to identify and predict the separate effects of multiple factors on performance is presented. The five steps allow a better understanding of task factors during the design process.

Application of two-level factorial design to investigate the effect of process parameters on the sonocrystallization of sulfathiazole

NASA Astrophysics Data System (ADS)

Kuo, Peng-Hsuan; Zhang, Bo-Cong; Su, Chie-Shaan; Liu, Jun-Jen; Sheu, Ming-Thau

2017-08-01

In this study, cooling sonocrystallization was used to recrystallize an active pharmaceutical ingredient, sulfathiazole, using methanol as the solvent. The effects of three operating parameters-sonication intensity, sonication duration, and solution concentration-on the recrystallization were investigated by using a 2k factorial design. The solid-state properties of sulfathiazole, including the mean particle size, crystal habit, and polymorphic form, were analyzed. Analysis of variance showed that the effect of the sonication intensity, cross-interaction effect of sonication intensity/sonication duration, and cross-interaction effect of sonication intensity/solution concentration on the recrystallization were significant. The results obtained using the 2k factorial design indicated that a combination of high sonication intensity and long sonication duration is not favorable for sonocrystallization, especially at a high solution concentration. A comparison of the solid-state properties of the original and the recrystallized sulfathiazole revealed that the crystal habit of the recrystallized sulfathiazole was more regular and that its mean particle size could be reduced to approximately 10 μm. Furthermore, the analytical results obtained using the PXRD, DSC, and FTIR spectroscopy indicated that the polymorphic purity of sulfathiazole improved from the original Form III/IV mixture to Form III after sonocrystallization.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bevan, A. J.; Golob, B.; Mannel, Th.

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.

The Chinese Family Assessment Instrument (C-FAI): Hierarchical Confirmatory Factor Analyses and Factorial Invariance

ERIC Educational Resources Information Center

Shek, Daniel T. L.; Ma, Cecilia M. S.

2010-01-01

Objective: This paper examines the dimensionality and factorial invariance of the Chinese Family Assessment Instrument (C-FAI) using multigroup confirmatory factor analyses (MCFAs). Method: A total of 3,649 students responded to the C-FAI in a community survey. Results: Results showed that there are five dimensions of the C-FAI (communication,…

Factorial Structure of Rosenberg's Self-Esteem Scale among Crack-Cocaine Drug Users.

ERIC Educational Resources Information Center

Wang, Jichuan; Siegal, Harvey A.; Falck, Russell S.; Carlson, Robert G.

2001-01-01

Used nine different confirmatory factor analysis models to test the factorial structure of Rosenberg's (M. Rosenberg, 1965) self-esteem scale with a sample of 430 crack-cocaine users. Results partly support earlier research to show a single global self-esteem factor underlying responses to the Rosenberg scale, method effects associated with item…

Bayesian adaptive phase II screening design for combination trials.

PubMed

Cai, Chunyan; Yuan, Ying; Johnson, Valen E

2013-01-01

Trials of combination therapies for the treatment of cancer are playing an increasingly important role in the battle against this disease. To more efficiently handle the large number of combination therapies that must be tested, we propose a novel Bayesian phase II adaptive screening design to simultaneously select among possible treatment combinations involving multiple agents. Our design is based on formulating the selection procedure as a Bayesian hypothesis testing problem in which the superiority of each treatment combination is equated to a single hypothesis. During the trial conduct, we use the current values of the posterior probabilities of all hypotheses to adaptively allocate patients to treatment combinations. Simulation studies show that the proposed design substantially outperforms the conventional multiarm balanced factorial trial design. The proposed design yields a significantly higher probability for selecting the best treatment while allocating substantially more patients to efficacious treatments. The proposed design is most appropriate for the trials combining multiple agents and screening out the efficacious combination to be further investigated. The proposed Bayesian adaptive phase II screening design substantially outperformed the conventional complete factorial design. Our design allocates more patients to better treatments while providing higher power to identify the best treatment at the end of the trial.

Development and optimization of enteric coated mucoadhesive microspheres of duloxetine hydrochloride using 32 full factorial design

PubMed Central

Setia, Anupama; Kansal, Sahil; Goyal, Naveen

2013-01-01

Background: Microspheres constitute an important part of oral drug delivery system by virtue of their small size and efficient carrier capacity. However, the success of these microspheres is limited due to their short residence time at the site of absorption. Objective: The objective of the present study was to formulate and systematically evaluate in vitro performance of enteric coated mucoadhesive microspheres of duloxetine hydrochloride (DLX), an acid labile drug. Materials and Methods: DLX microspheres were prepared by simple emulsification phase separation technique using chitosan as carrier and glutaraldehyde as a cross-linking agent. Microspheres prepared were coated with eudragit L-100 using an oil-in-oil solvent evaporation method. Eudragit L-100was used as enteric coating polymer with the aim to release the drug in small intestine The microspheres prepared were characterized by particle size, entrapment efficiency, swelling index (SI), mucoadhesion time, in vitro drug release and surface morphology. A 32 full factorial design was employed to study the effect of independent variables polymer-to-drug ratio (X1) and stirring speed (X2) on dependent variables, particle size, entrapment efficiency, SI, in vitro mucoadhesion and drug release up to 24 h (t24). Results: Microspheres formed were discrete, spherical and free flowing. The microspheres exhibited good mucoadhesive property and also showed high percentage entrapment efficiency. The microspheres were able to sustain the drug release up to 24 h. Conclusion: Thus, the prepared enteric coated mucoadhesive microspheres may prove to be a potential controlled release formulation of DLX for oral administration. PMID:24167786

A fractional factorial probabilistic collocation method for uncertainty propagation of hydrologic model parameters in a reduced dimensional space

NASA Astrophysics Data System (ADS)

Wang, S.; Huang, G. H.; Huang, W.; Fan, Y. R.; Li, Z.

2015-10-01

In this study, a fractional factorial probabilistic collocation method is proposed to reveal statistical significance of hydrologic model parameters and their multi-level interactions affecting model outputs, facilitating uncertainty propagation in a reduced dimensional space. The proposed methodology is applied to the Xiangxi River watershed in China to demonstrate its validity and applicability, as well as its capability of revealing complex and dynamic parameter interactions. A set of reduced polynomial chaos expansions (PCEs) only with statistically significant terms can be obtained based on the results of factorial analysis of variance (ANOVA), achieving a reduction of uncertainty in hydrologic predictions. The predictive performance of reduced PCEs is verified by comparing against standard PCEs and the Monte Carlo with Latin hypercube sampling (MC-LHS) method in terms of reliability, sharpness, and Nash-Sutcliffe efficiency (NSE). Results reveal that the reduced PCEs are able to capture hydrologic behaviors of the Xiangxi River watershed, and they are efficient functional representations for propagating uncertainties in hydrologic predictions.

Asphaltic concrete overlays of rigid and flexible pavements : interim report No. 1.

DOT National Transportation Integrated Search

1977-09-01

This study evaluated the effect of a given thickness of asphaltic concrete overlay in rehabilitating 53 test sections conforming to the experiment design. This factorial design specified various levels of traffic intensity and overlay thickness for b...

Computers in Manufacturing.

ERIC Educational Resources Information Center

Hudson, C. A.

1982-01-01

Advances in factory computerization (computer-aided design and computer-aided manufacturing) are reviewed, including discussions of robotics, human factors engineering, and the sociological impact of automation. (JN)

Computer experimental analysis of the CHP performance of a 100 kW e SOFC Field Unit by a factorial design

NASA Astrophysics Data System (ADS)

Calì, M.; Santarelli, M. G. L.; Leone, P.

Gas Turbine Technologies (GTT) and Politecnico di Torino, both located in Torino (Italy), have been involved in the design and installation of a SOFC laboratory in order to analyse the operation, in cogenerative configuration, of the CHP 100 kW e SOFC Field Unit, built by Siemens-Westinghouse Power Corporation (SWPC), which is at present (May 2005) starting its operation and which will supply electric and thermal power to the GTT factory. In order to take the better advantage from the analysis of the on-site operation, and especially to correctly design the scheduled experimental tests on the system, we developed a mathematical model and run a simulated experimental campaign, applying a rigorous statistical approach to the analysis of the results. The aim of this work is the computer experimental analysis, through a statistical methodology (2 k factorial experiments), of the CHP 100 performance. First, the mathematical model has been calibrated with the results acquired during the first CHP100 demonstration at EDB/ELSAM in Westerwoort. After, the simulated tests have been performed in the form of computer experimental session, and the measurement uncertainties have been simulated with perturbation imposed to the model independent variables. The statistical methodology used for the computer experimental analysis is the factorial design (Yates' Technique): using the ANOVA technique the effect of the main independent variables (air utilization factor U ox, fuel utilization factor U F, internal fuel and air preheating and anodic recycling flow rate) has been investigated in a rigorous manner. Analysis accounts for the effects of parameters on stack electric power, thermal recovered power, single cell voltage, cell operative temperature, consumed fuel flow and steam to carbon ratio. Each main effect and interaction effect of parameters is shown with particular attention on generated electric power and stack heat recovered.

Comparison of accelerator physics issues for symmetric and asymmetric B-factory rings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tigner, M.

1990-10-10

A systematic comparison of accelerator physics issues from the beam-beam interaction to single particle stability including ring and IR layout, synchrotron radiation and lost particle backgrounds, and single and multi-bunch instabilities is given. While some practical handicap probably accrues to the asymmetric design because of its extra constraints, the differences in the two approaches tend to be obscured by larger issues such as how to achieve the enormous increases in luminosity demanded of a b-factory.

Multivariate optimization of an analytical method for the analysis of dog and cat foods by ICP OES.

PubMed

da Costa, Silvânio Silvério Lopes; Pereira, Ana Cristina Lima; Passos, Elisangela Andrade; Alves, José do Patrocínio Hora; Garcia, Carlos Alexandre Borges; Araujo, Rennan Geovanny Oliveira

2013-04-15

Experimental design methodology was used to optimize an analytical method for determination of the mineral element composition (Al, Ca, Cd, Cr, Cu, Ba, Fe, K, Mg, Mn, P, S, Sr and Zn) of dog and cat foods. Two-level full factorial design was applied to define the optimal proportions of the reagents used for microwave-assisted sample digestion (2.0 mol L(-1) HNO3 and 6% m/v H2O2). A three-level factorial design for two variables was used to optimize the operational conditions of the inductively coupled plasma optical emission spectrometer, employed for analysis of the extracts. A radiofrequency power of 1.2 kW and a nebulizer argon flow of 1.0 L min(-1) were selected. The limits of quantification (LOQ) were between 0.03 μg g(-1) (Cr, 267.716 nm) and 87 μg g(-1) (Ca, 373.690 nm). The trueness of the optimized method was evaluated by analysis of five certified reference materials (CRMs): wheat flour (NIST 1567a), bovine liver (NIST 1577), peach leaves (NIST 1547), oyster tissue (NIST 1566b), and fish protein (DORM-3). The recovery values obtained for the CRMs were between 80 ± 4% (Cr) and 117 ± 5% (Cd), with relative standard deviations (RSDs) better than 5%, demonstrating that the proposed method offered good trueness and precision. Ten samples of pet food (five each of cat and dog food) were acquired at supermarkets in Aracaju city (Sergipe State, Brazil). Concentrations in the dog food ranged between 7.1 mg kg(-1) (Ba) and 2.7 g kg(-1) (Ca), while for cat food the values were between 3.7 mg kg(-1) (Ba) and 3.0 g kg(-1) (Ca). The concentrations of Ca, K, Mg, P, Cu, Fe, Mn, and Zn in the food were compared with the guidelines of the United States' Association of American Feed Control Officials (AAFCO) and the Brazilian Ministry of Agriculture, Livestock, and Food Supply (Ministério da Agricultura, Pecuária e Abastecimento-MAPA). Copyright © 2013 Elsevier B.V. All rights reserved.

Hollow fiber-based liquid phase microextraction with factorial design optimization and gas chromatography-tandem mass spectrometry for determination of cannabinoids in human hair.

PubMed

Emídio, Elissandro Soares; de Menezes Prata, Vanessa; de Santana, Fernando José Malagueño; Dórea, Haroldo Silveira

2010-08-15

A new method, based on hollow fiber liquid-phase microextraction (HF-LPME) and gas chromatography-tandem mass spectrometry (GC-MSMS), was developed for determination of Delta(9)-tetrahydrocannabinol (THC), cannabidiol (CBD) and cannabinol (CBN) in samples of human hair. Since hair is a solid matrix, the samples were subjected to alkaline digestion using NaOH. The aqueous solutions obtained were extracted using a 6cm polypropylene fiber (600microm i.d., 200microm wall thickness, 0.2microm pore size) for each extraction. A 2(5-1) fractional factorial design for screening, and a central composite design for optimization of significant variables, was applied during development of the extraction method. The variables evaluated were the type of extraction solvent, pH, stirring speed, extraction time, and acceptor phase volume. The optimized conditions for the proposed extraction procedure were 10mg of hair sample; 20microL of butyl acetate; aqueous (pH 14) donor phase containing 6.8% NaCl; 600rpm stirring speed; 20min extraction time. A linear response was obtained in the ranges 1-500pgmg(-1) (CBD and CBN) and 20-500pgmg(-1) (THC), with regression coefficients >0.99. Precision, determined as the relative standard deviation, was 3.3-8.9% (intra-day) and 4.4-13.7% (inter-day). Absolute recoveries varied in the ranges 4.4-4.8% (CBD), 7.6-8.9% (THC) and 7.7-8.2% (CBN). Limits of detection (LOD, S/N=3) and quantification (LOQ, S/N=10) were 0.5-15pgmg(-1) and 1-20pgmg(-1), respectively. The method was successfully used to determine CBD, THC and CBN in hair samples from patients in a drug dependency rehabilitation center. Concentrations varied in the ranges 1-18pgmg(-1) (CBD), 20-232pgmg(-1) (THC) and 9-107pgmg(-1) (CBN), confirming the suitability of the method for monitoring studies. Copyright 2010 Elsevier B.V. All rights reserved.

A novel method about detecting missing holes on the motor carling

NASA Astrophysics Data System (ADS)

Xu, Hongsheng; Tan, Hao; Li, Guirong

2018-03-01

After a deep analysis on how to use an image processing system to detect the missing holes on the motor carling, we design the whole system combined with the actual production conditions of the motor carling. Afterwards we explain the whole system's hardware and software in detail. We introduce the general functions for the system's hardware and software. Analyzed these general functions, we discuss the modules of the system's hardware and software and the theory to design these modules in detail. The measurement to confirm the area to image processing, edge detection, randomized Hough transform to circle detecting is explained in detail. Finally, the system result tested in the laboratory and in the factory is given out.

Analysis of Work Design in Rubber Processing Plant

NASA Astrophysics Data System (ADS)

Wahyuni, Dini; Nasution, Harmein; Budiman, Irwan; Wijaya, Khairini

2018-02-01

The work design illustrates how structured jobs, tasks, and roles are defined and modified and their impact on individuals, groups, and organizations. If the work is not designed well, the company must pay greater costs for workers' health, longer production processes or even penalties for not being able to meet the delivery schedule. This is visible to the condition in a rubber processing factory in North Sumatra. Work design aspects such as layouts, machinery and equipment, worker's physical working environment, work methods, and organizational policies have not been well-organized. Coagulum grinding machines into sheets are often damaged, resulting in 4 times the delay of product delivery in 2016, the presence of complaints of heat exposure submitted by workers, and workstation that has not been properly arranged is an indication of the need for work design. The research data will be collected through field observation, and distribution of questionnaires related aspects of work design. The result of the analysis depends on the respondent's answer from the distributed questionnaire regarding the 6 aspects studied.

78 FR 65326 - Agency Information Collection Activities; Proposed Collection; Comment Request; Experimental...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... Directed at Adolescents.'' This study is designed to examine how adolescents interpret DTC advertising... understanding of benefits and risks in DTC ads differ across this part of the lifespan. Design Overview Within... (benefit onset: immediate, delayed) x 2 (risk severity: high, low) factorial design, based on the rationale...

Sensory imbalance as mechanism of orientation disruption in the leafminer, Phyllocnistis citrella: Elucidation by multivariate geometric designs and response surface models

USDA-ARS?s Scientific Manuscript database

Experimental designs developed to address mixtures are ideally suited for many areas of experimental biology including pheromone blend studies because they address the confounding of proportionality and concentration intrinsic to factorial and one-factor-at-a-time designs. Geometric multivariate des...

The effect of Gestalt laws of perceptual organization on the comprehension of three-variable bar and line graphs.

PubMed

Ali, Nadia; Peebles, David

2013-02-01

We report three experiments investigating the ability of undergraduate college students to comprehend 2 x 2 "interaction" graphs from two-way factorial research designs. Factorial research designs are an invaluable research tool widely used in all branches of the natural and social sciences, and the teaching of such designs lies at the core of many college curricula. Such data can be represented in bar or line graph form. Previous studies have shown, however, that people interpret these two graphical forms differently. In Experiment 1, participants were required to interpret interaction data in either bar or line graphs while thinking aloud. Verbal protocol analysis revealed that line graph users were significantly more likely to misinterpret the data or fail to interpret the graph altogether. The patterns of errors line graph users made were interpreted as arising from the operation of Gestalt principles of perceptual organization, and this interpretation was used to develop two modified versions of the line graph, which were then tested in two further experiments. One of the modifications resulted in a significant improvement in performance. Results of the three experiments support the proposed explanation and demonstrate the effects (both positive and negative) of Gestalt principles of perceptual organization on graph comprehension. We propose that our new design provides a more balanced representation of the data than the standard line graph for nonexpert users to comprehend the full range of relationships in two-way factorial research designs and may therefore be considered a more appropriate representation for use in educational and other nonexpert contexts.

Mars surface-based factory: Computer control of a water treatment system to support a space colony on Mars

NASA Technical Reports Server (NTRS)

Brice, R.; Mosley, J.; Willis, D.; Coleman, K.; Martin, C.; Shelby, L.; Kelley, U.; Renfro, E.; Griffith, G.; Warsame, A.

1989-01-01

In a continued effort to design a surface-based factory on Mars for the production of oxygen and water, the Design Group at Prairie View A&M University made a preliminary study of the surface and atmospheric composition on Mars and determined the mass densities of the various gases in the martian atmosphere. Based on the initial studies, the design group determined oxygen and water to be the two products that could be produced economically under the martian conditions. Studies were also made on present production techniques to obtain water and oxygen. Analyses were made to evaluate the current methods of production that were adaptable to the martian conditions. The detailed report was contained in an Interim Report submitted to NASA/USRA in Aug. of 1986. Even though the initial effort was the production of oxygen and water, we found it necessary to produce some diluted gases that can be mixed with oxygen to constitute 'breathable' air. In Phase 2--Task 1A, the Prairie View A&M University team completed the conceptual design of a breathable-air manufacturing system, a means of drilling for underground water, and storage of water for future use. The design objective of the team for the 1987-1988 academic year was the conceptual design of an integrated system for the supply of quality water for biological consumption, farming, and residential and industrial use. The design has also been completed. Phase 2--Task 1C is the present task for the Prairie View Design Team. This is a continuation of the previous task, and the continuation of this effort is the investigation into the extraction of water from beneath the surface and an alternative method of extraction from ice formations on the surface of Mars if accessible. In addition to investigation of water extraction, a system for computer control of extraction and treatment was developed with emphasis on fully automated control with robotic repair and maintenance. It is expected that oxygen- and water-producing plants on Mars will be limited in the amount of human control that will be available to operate large and/or isolated plants. Therefore, it is imperative that computers be integrated into plant operation with the capability to maintain life support systems and analyze and replace defective parts or systems with no human interface.

A novel synthesis of a new thorium (IV) metal organic framework nanostructure with well controllable procedure through ultrasound assisted reverse micelle method.

PubMed

Sargazi, Ghasem; Afzali, Daryoush; Mostafavi, Ali

2018-03-01

Reverse micelle (RM) and ultrasound assisted reverse micelle (UARM) were applied to the synthesis of novel thorium nanostructures as metal organic frameworks (MOFs). Characterization with different techniques showed that the Th-MOF sample synthesized by UARM method had higher thermal stability (354°C), smaller mean particle size (27nm), and larger surface area (2.02×10 3 m 2 /g). Besides, in this novel approach, the nucleation of crystals was found to carry out in a shorter time. The synthesis parameters of UARM method were designed by 2 k-1 factorial and the process control was systematically studied using analysis of variance (ANOVA) and response surface methodology (RSM). ANOVA showed that various factors, including surfactant content, ultrasound duration, temperature, ultrasound power, and interaction between these factors, considerably affected different properties of the Th-MOF samples. According to the 2 k-1 factorial design, the determination coefficient (R 2 ) of the model is 0.999, with no significant lack of fit. The F value of 5432, implied that the model was highly significant and adequate to represent the relationship between the responses and the independent variables, also the large R-adjusted value indicates a good relationship between the experimental data and the fitted model. RSM predicted that it would be possible to produce Th-MOF samples with the thermal stability of 407°C, mean particle size of 13nm, and surface area of 2.20×10 3 m 2 /g. The mechanism controlling the Th-MOF properties was considerably different from the conventional mechanisms. Moreover, the MOF sample synthesized using UARM exhibited higher capacity for nitrogen adsorption as a result of larger pore sizes. It is believed that the UARM method and systematic studies developed in the present work can be considered as a new strategy for their application in other nanoscale MOF samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Optimized and validated flow-injection spectrophotometric analysis of topiramate, piracetam and levetiracetam in pharmaceutical formulations.

PubMed

Hadad, Ghada M; Abdel-Salam, Randa A; Emara, Samy

2011-12-01

Application of a sensitive and rapid flow injection analysis (FIA) method for determination of topiramate, piracetam, and levetiracetam in pharmaceutical formulations has been investigated. The method is based on the reaction with ortho-phtalaldehyde and 2-mercaptoethanol in a basic buffer and measurement of absorbance at 295 nm under flow conditions. Variables affecting the determination such as sample injection volume, pH, ionic strength, reagent concentrations, flow rate of reagent and other FIA parameters were optimized to produce the most sensitive and reproducible results using a quarter-fraction factorial design, for five factors at two levels. Also, the method has been optimized and fully validated in terms of linearity and range, limit of detection and quantitation, precision, selectivity and accuracy. The method was successfully applied to the analysis of pharmaceutical preparations.

Rationale for constructing waste-disposal plants at existing enterprises

NASA Astrophysics Data System (ADS)

Strelkov, Alexander; Teplykh, Svetlana; Gorshkalev, Pavel; Proshina, Elizaveta

2017-10-01

The Federal State Statistics Service of the Republic of Tatarstan collected data on registered organizations involved in the fabrication and dyeing of fur. This paper describes wastewater characteristic of an existing enterprise, LLC “Melita”. This enterprise is a factory of a complete technology cycle, with the process starting from fur manufacture and design to implementation. Maximum capacity of the factory is 1800 skins per day, (excluding fur), and its average productivity is 1000 skins per day. Thorough examination of possible methods and schemes for wastewater from fur production purification showed that it is most reasonable to use technology schemes which included the structures of mechanical, physico-chemical and biological purification. As a result, the study provided a new technological scheme for industrial wastewater purification. This scheme offers using chloride barium and sodium hydrocarbons complex as reagents. For LLC “Melita”, the wastewater absorbing pond is the Volga River. Water quality indicators are taken according to the data of the FGBU “Hydrometeorology and Environmental Monitoring Office”. The research also calculates allowable discharge rates and environmental charges in the city sewer networks and ponds.

Application of synthetic biology for production of chemicals in yeast Saccharomyces cerevisiae.

PubMed

Li, Mingji; Borodina, Irina

2015-02-01

Synthetic biology and metabolic engineering enable generation of novel cell factories that efficiently convert renewable feedstocks into biofuels, bulk, and fine chemicals, thus creating the basis for biosustainable economy independent on fossil resources. While over a hundred proof-of-concept chemicals have been made in yeast, only a very small fraction of those has reached commercial-scale production so far. The limiting factor is the high research cost associated with the development of a robust cell factory that can produce the desired chemical at high titer, rate, and yield. Synthetic biology has the potential to bring down this cost by improving our ability to predictably engineer biological systems. This review highlights synthetic biology applications for design, assembly, and optimization of non-native biochemical pathways in baker's yeast Saccharomyces cerevisiae We describe computational tools for the prediction of biochemical pathways, molecular biology methods for assembly of DNA parts into pathways, and for introducing the pathways into the host, and finally approaches for optimizing performance of the introduced pathways. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permission@oup.com.

Adaptive laboratory evolution – principles and applications for biotechnology

PubMed Central

2013-01-01

Adaptive laboratory evolution is a frequent method in biological studies to gain insights into the basic mechanisms of molecular evolution and adaptive changes that accumulate in microbial populations during long term selection under specified growth conditions. Although regularly performed for more than 25 years, the advent of transcript and cheap next-generation sequencing technologies has resulted in many recent studies, which successfully applied this technique in order to engineer microbial cells for biotechnological applications. Adaptive laboratory evolution has some major benefits as compared with classical genetic engineering but also some inherent limitations. However, recent studies show how some of the limitations may be overcome in order to successfully incorporate adaptive laboratory evolution in microbial cell factory design. Over the last two decades important insights into nutrient and stress metabolism of relevant model species were acquired, whereas some other aspects such as niche-specific differences of non-conventional cell factories are not completely understood. Altogether the current status and its future perspectives highlight the importance and potential of adaptive laboratory evolution as approach in biotechnological engineering. PMID:23815749

Effect of Temperature, Precursor Type and Dripping Time on the Crystallite Size of Nano ZnO Obtained by One-Pot Synthesis: 2 k Full Factorial Design Analysis.

PubMed

Machado, Morgana de Medeiros; Savi, Bruna Martinello; Perucchi, Mariana Borges; Benedetti, Alessandro; Oliveira, Luis Felipe Silva; Bernardin, Adriano Michael

2018-06-01

The aim of this work was to determine the effect of temperature, precursor and dripping time on the crystallite size of ZnO nanoparticles synthesized by controlled precipitation according a 2k full factorial design. ZnCl2, Zn(NO3)2 and NaOH were used as precursors. After synthesis, the nano crystalline powder was characterized by XRD (Cu Kα), UV-Vis, and HR-TEM. The nano ZnO particles presented a crystallite size between 210 and 260 Å (HR-TEM and XRD). The results show that the crystallite size depends on the type of precursor and temperature of synthesis, but not on the dripping time.

Synchrotron radiation beamline to study radioactive materials at the Photon Factory

NASA Astrophysics Data System (ADS)

Konishi, Hiroyuki; Yokoya, Akinari; Shiwaku, Hideaki; Motohashi, Haruhiko; Makita, Tomoko; Kashihara, Yasuharu; Hashimoto, Shinya; Harami, Taikan; Sasaki, Teikichi A.; Maeta, Hiroshi; Ohno, Hideo; Maezawa, Hideki; Asaoka, Seiji; Kanaya, Noriichi; Ito, Kenji; Usami, Noriko; Kobayashi, Katsumi

1996-02-01

Design and construction of a new beamline have been described. The beamline is housed in a specially designed area controlled for radioactive materials at the Photon Factory (PF) in the National Laboratory for High Energy Physics (KEK). The beamline system consists of a front-end and two branchlines. One of the branchlines is used for X-ray photoelectron spectroscopy and radiation biology in the energy range of 1.8-6 keV and the other for X-ray diffractometry and XAFS studies as well as radiation biology in the range of 4-20 keV. The former was particularly equipped for the protection against accidental scattering of radioactive materials both inside and outside of the vacuum system.

Enhancing the Automatic Generation of Hints with Expert Seeding

ERIC Educational Resources Information Center

Stamper, John; Barnes, Tiffany; Croy, Marvin

2011-01-01

The Hint Factory is an implementation of our novel method to automatically generate hints using past student data for a logic tutor. One disadvantage of the Hint Factory is the time needed to gather enough data on new problems in order to provide hints. In this paper we describe the use of expert sample solutions to "seed" the hint generation…

Effect of Items Direction (Positive or Negative) on the Factorial Construction and Criterion Related Validity in Likert Scale

ERIC Educational Resources Information Center

Naji Qasem, Mamun Ali; Ahmad Gul, Showkeen Bilal

2014-01-01

The study was conducted to know the effect of items direction (positive or negative) on the factorial construction and criterion related validity in Likert scale. The descriptive survey research method was used for the study and the sample consisted of 510 undergraduate students selected by used random sampling technique. A scale developed by…

Optimization of the Ion Source-Mass Spectrometry Parameters in Non-Steroidal Anti-Inflammatory and Analgesic Pharmaceuticals Analysis by a Design of Experiments Approach.

PubMed

Paíga, Paula; Silva, Luís M S; Delerue-Matos, Cristina

2016-10-01

The flow rates of drying and nebulizing gas, heat block and desolvation line temperatures and interface voltage are potential electrospray ionization parameters as they may enhance sensitivity of the mass spectrometer. The conditions that give higher sensitivity of 13 pharmaceuticals were explored. First, Plackett-Burman design was implemented to screen significant factors, and it was concluded that interface voltage and nebulizing gas flow were the only factors that influence the intensity signal for all pharmaceuticals. This fractionated factorial design was projected to set a full 2(2) factorial design with center points. The lack-of-fit test proved to be significant. Then, a central composite face-centered design was conducted. Finally, a stepwise multiple linear regression and subsequently an optimization problem solving were carried out. Two main drug clusters were found concerning the signal intensities of all runs of the augmented factorial design. p-Aminophenol, salicylic acid, and nimesulide constitute one cluster as a result of showing much higher sensitivity than the remaining drugs. The other cluster is more homogeneous with some sub-clusters comprising one pharmaceutical and its respective metabolite. It was observed that instrumental signal increased when both significant factors increased with maximum signal occurring when both codified factors are set at level +1. It was also found that, for most of the pharmaceuticals, interface voltage influences the intensity of the instrument more than the nebulizing gas flowrate. The only exceptions refer to nimesulide where the relative importance of the factors is reversed and still salicylic acid where both factors equally influence the instrumental signal. Graphical Abstract ᅟ.

Formulation of topical bioadhesive gel of aceclofenac using 3-level factorial design.

PubMed

Singh, Sanjay; Parhi, Rabinarayan; Garg, Anuj

2011-01-01

The objective of this work was to develop bioadhesive topical gel of Aceclofenac with the help of response-surface approach. Experiments were performed according to a 3-level factorial design to evaluate the effects of two independent variables [amount of Poloxamer 407 (PL-407 = X1) and hydroxypropylmethyl cellulose K100 M (HPMC = X2)] on the bioadhesive character of gel, rheological property of gel (consistency index), and in-vitro drug release. The best model was selected to fit the data. Mathematical equation was generated by Design Expert® software for the model which assists in determining the effect of independent variables. Response surface plots were also generated by the software for analyzing effect of the independent variables on the response. Quadratic model was found to be the best for all the responses. Both independent variable (X1 and X2) were found to have synergistic effect on bioadhesion (Y1) but the effect of HPMC was more pronounced than PL-407. Consistency index was enhanced by increasing the level of both independent variables. An antagonistic effect of both independent variables was found on cumulative percentage release of drug in 2 (Y3) and 8 h (Y4). Both independent variables approximately equally contributed the antagonistic effect on Y3 whereas antagonistic effect of HPMC was more pronounced than PL-407. The effect of formulation variables on the product characteristics can be easily predicted and precisely interpreted by using a 3-level factorial experimental design and generated quadratic mathematical equations.

Web-Based Smoking-Cessation Program

PubMed Central

Strecher, Victor J.; McClure, Jennifer B.; Alexander, Gwen L.; Chakraborty, Bibhas; Nair, Vijay N.; Konkel, Janine M.; Greene, Sarah M.; Collins, Linda M.; Carlier, Carola C.; Wiese, Cheryl J.; Little, Roderick J.; Pomerleau, Cynthia S.; Pomerleau, Ovide F.

2009-01-01

Background Initial trials of web-based smoking-cessation programs have generally been promising. The active components of these programs, however, are not well understood. This study aimed to (1) identify active psychosocial and communication components of a web-based smoking-cessation intervention and (2) examine the impact of increasing the tailoring depth on smoking cessation. Design Randomized fractional factorial design. Setting Two HMOs: Group Health in Washington State and Henry Ford Health System in Michigan. Participants 1866 smokers. Intervention A web-based smoking-cessation program plus nicotine patch. Five components of the intervention were randomized using a fractional factorial design: high- versus low-depth tailored success story, outcome expectation, and efficacy expectation messages; high- versus low-personalized source; and multiple versus single exposure to the intervention components. Measurements Primary outcome was 7 day point-prevalence abstinence at the 6-month follow-up. Findings Abstinence was most influenced by high-depth tailored success stories and a high-personalized message source. The cumulative assignment of the three tailoring depth factors also resulted in increasing the rates of 6-month cessation, demonstrating an effect of tailoring depth. Conclusions The study identified relevant components of smoking-cessation interventions that should be generalizable to other cessation interventions. The study also demonstrated the importance of higher-depth tailoring in smoking-cessation programs. Finally, the use of a novel fractional factorial design allowed efficient examination of the study aims. The rapidly changing interfaces, software, and capabilities of eHealth are likely to require such dynamic experimental approaches to intervention discovery. PMID:18407003

Increasing the quantity and quality of searching for current best evidence to answer clinical questions: protocol and intervention design of the MacPLUS FS Factorial Randomized Controlled Trials.

PubMed

Agoritsas, Thomas; Iserman, Emma; Hobson, Nicholas; Cohen, Natasha; Cohen, Adam; Roshanov, Pavel S; Perez, Miguel; Cotoi, Chris; Parrish, Rick; Pullenayegum, Eleanor; Wilczynski, Nancy L; Iorio, Alfonso; Haynes, R Brian

2014-09-20

Finding current best evidence for clinical decisions remains challenging. With 3,000 new studies published every day, no single evidence-based resource provides all answers or is sufficiently updated. McMaster Premium LiteratUre Service--Federated Search (MacPLUS FS) addresses this issue by looking in multiple high quality resources simultaneously and displaying results in a one-page pyramid with the most clinically useful at the top. Yet, additional logistical and educational barriers need to be addressed to enhance point-of-care evidence retrieval. This trial seeks to test three innovative interventions, among clinicians registered to MacPLUS FS, to increase the quantity and quality of searching for current best evidence to answer clinical questions. In a user-centered approach, we designed three interventions embedded in MacPLUS FS: (A) a web-based Clinical Question Recorder; (B) an Evidence Retrieval Coach composed of eight short educational videos; (C) an Audit, Feedback and Gamification approach to evidence retrieval, based on the allocation of 'badges' and 'reputation scores.' We will conduct a randomized factorial controlled trial among all the 904 eligible medical doctors currently registered to MacPLUS FS at the hospitals affiliated with McMaster University, Canada. Postgraduate trainees (n=429) and clinical faculty/staff (n=475) will be randomized to each of the three following interventions in a factorial design (AxBxC). Utilization will be continuously recorded through clinicians’ accounts that track logins and usage, down to the level of individual keystrokes. The primary outcome is the rate of searches per month per user during the six months of follow-up. Secondary outcomes, measured through the validated Impact Assessment Method questionnaire, include: utility of answers found (meeting clinicians’ information needs), use (application in practice), and perceived usefulness on patient outcomes. Built on effective models for the point-of-care teaching, these interventions approach evidence retrieval as a clinical skill. If effective, they may offer the opportunity to enhance it for a large audience, at low cost, providing better access to relevant evidence across many top EBM resources in parallel. ClinicalTrials.Gov NCT02038439.

Jean Piaget: Images of a life and his factory.

PubMed

Burman, Jeremy Trevelyan

2012-08-01

In this article, I use a new book about Jean Piaget to introduce a new historical method: examining "psychological factories." I also discuss some of the ways that "Great Men" are presented in the literature, as well as opportunities for new projects if one approaches the history of the discipline differently and examines the conditions that made that greatness possible. To that end, the article includes many details about Piaget that have never before been discussed in English. Attention is drawn, in particular, to Piaget's collaborators: the hundreds of workers at his factory in Geneva, many of whom were women. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

Improving the Ability of Mathematic Representation Capabilities and Students Skills in Importing Square Forms to Square Using Variation Solutions

NASA Astrophysics Data System (ADS)

Nirawati, R.

2018-04-01

This research was conducted to see whether the variation of the solution is acceptable and easy to understand by students with different level of ability so that it can be seen the difference of students ability in facilitating the quadratic form in the upper, middle and lower groups. This research used experimental method with factorial design. Based on the result of final test analysis, there were differences of students ability in upper group, medium group, and lower group in putting squared form based on the use certain variation of solution.

The Walking Interventions Through Texting (WalkIT) Trial: Rationale, Design, and Protocol for a Factorial Randomized Controlled Trial of Adaptive Interventions for Overweight and Obese, Inactive Adults.

PubMed

Hurley, Jane C; Hollingshead, Kevin E; Todd, Michael; Jarrett, Catherine L; Tucker, Wesley J; Angadi, Siddhartha S; Adams, Marc A

2015-09-11

Walking is a widely accepted and frequently targeted health promotion approach to increase physical activity (PA). Interventions to increase PA have produced only small improvements. Stronger and more potent behavioral intervention components are needed to increase time spent in PA, improve cardiometabolic risk markers, and optimize health. Our aim is to present the rationale and methods from the WalkIT Trial, a 4-month factorial randomized controlled trial (RCT) in inactive, overweight/obese adults. The main purpose of the study was to evaluate whether intensive adaptive components result in greater improvements to adults' PA compared to the static intervention components. Participants enrolled in a 2x2 factorial RCT and were assigned to one of four semi-automated, text message-based walking interventions. Experimental components included adaptive versus static steps/day goals, and immediate versus delayed reinforcement. Principles of percentile shaping and behavioral economics were used to operationalize experimental components. A Fitbit Zip measured the main outcome: participants' daily physical activity (steps and cadence) over the 4-month duration of the study. Secondary outcomes included self-reported PA, psychosocial outcomes, aerobic fitness, and cardiorespiratory risk factors assessed pre/post in a laboratory setting. Participants were recruited through email listservs and websites affiliated with the university campus, community businesses and local government, social groups, and social media advertising. This study has completed data collection as of December 2014, but data cleaning and preliminary analyses are still in progress. We expect to complete analysis of the main outcomes in late 2015 to early 2016. The Walking Interventions through Texting (WalkIT) Trial will further the understanding of theory-based intervention components to increase the PA of men and women who are healthy, insufficiently active and are overweight or obese. WalkIT is one of the first studies focusing on the individual components of combined goal setting and reward structures in a factorial design to increase walking. The trial is expected to produce results useful to future research interventions and perhaps industry initiatives, primarily focused on mHealth, goal setting, and those looking to promote behavior change through performance-based incentives. ClinicalTrials.gov NCT02053259; https://clinicaltrials.gov/ct2/show/NCT02053259 (Archived by WebCite at http://www.webcitation.org/6b65xLvmg).

Design of experiment (DOE) study of biodegradable magnesium alloy synthesized by mechanical alloying using fractional factorial design

NASA Astrophysics Data System (ADS)

Salleh, Emee Marina; Ramakrishnan, Sivakumar; Hussain, Zuhailawati

2014-06-01

The biodegradable nature of magnesium (Mg) makes it a most highlighted and attractive to be used as implant materials. However, rapid corrosion rate of Mg alloys especially in electrolytic aqueous environment limits its performance. In this study, Mg alloy was mechanically milled by incorporating manganese (Mn) as alloying element. An attempt was made to study both effect of mechanical alloying and subsequent consolidation processes on the bulk properties of Mg-Mn alloys. 2k-2 factorial design was employed to determine the significant factors in producing Mg alloy which has properties closes to that of human bones. The design considered six factors (i.e. milling time, milling speed, weight percentage of Mn, compaction pressure, sintering temperature and sintering time). Density and hardness were chosen as the responses for assessing the most significant parameters that affected the bulk properties of Mg-Mn alloys. The experimental variables were evaluated using ANOVA and regression model. The main parameter investigated was compaction pressure.

Study on effects of E-glass fiber hybrid composites enhanced with multi-walled carbon nanotubes under tensile load using full factorial design of experiments

NASA Astrophysics Data System (ADS)

Musthak, Md.; Madhavi, M.; Ahsanullah, F. M.

2017-08-01

Carbon nanotubes (CNT's) are attracting scientific and industrial interest by virtue of their outstanding characteristics. The present research problem deals with the fabrication and characterization of E-glass fiber composites enhanced by carbon nanotubes. In the present study, three factors with two levels are considered. Hence, the design is called 23 full factorial design of experiment. The process parameters considered for the present problem are weight of multi-walled carbon nanotubes, process to disperse nano-particles in resin, and orientation of woven fabric. In addition, their levels considered for the experiment are higher level (+1) and lower level (-1). Fabrication of E-glass fiber composites was carried out according to design, and the specimens were prepared with respect to the ASTM standards D3039-76 and tensile testing was performed. The results show that the nano-particulated composite plate can be manufactured by considering lower level nano-particles stirred with probe sonicator and plied-up with hybrid orientation.

Product modular design incorporating preventive maintenance issues

NASA Astrophysics Data System (ADS)

Gao, Yicong; Feng, Yixiong; Tan, Jianrong

2016-03-01

Traditional modular design methods lead to product maintenance problems, because the module form of a system is created according to either the function requirements or the manufacturing considerations. For solving these problems, a new modular design method is proposed with the considerations of not only the traditional function related attributes, but also the maintenance related ones. First, modularity parameters and modularity scenarios for product modularity are defined. Then the reliability and economic assessment models of product modularity strategies are formulated with the introduction of the effective working age of modules. A mathematical model used to evaluate the difference among the modules of the product so that the optimal module of the product can be established. After that, a multi-objective optimization problem based on metrics for preventive maintenance interval different degrees and preventive maintenance economics is formulated for modular optimization. Multi-objective GA is utilized to rapidly approximate the Pareto set of optimal modularity strategy trade-offs between preventive maintenance cost and preventive maintenance interval difference degree. Finally, a coordinate CNC boring machine is adopted to depict the process of product modularity. In addition, two factorial design experiments based on the modularity parameters are constructed and analyzed. These experiments investigate the impacts of these parameters on the optimal modularity strategies and the structure of module. The research proposes a new modular design method, which may help to improve the maintainability of product in modular design.

Selection and optimization of Bacillus atrophaeus inoculum medium and its effect on spore yield and thermal resistance.

PubMed

Sella, Sandra Regina B R; Dlugokenski, Regina Elizabete F; Guizelini, Belquis P; Vandenberghe, Luciana P S; Medeiros, Adriane B P; Pandey, Ashok; Soccol, Carlos Ricardo

2008-12-01

Bacillus atrophaeus's spores are used as biological indicators to monitor sterilization processes and as a Bacillus anthracis surrogate in the development and validation of biosafety methods. The regular use of biological indicators to evaluate the efficiency of sterilization processes is a legal requirement for health services. However, its high cost hinders its widespread use. Aiming at developing a cost-effective inoculum medium, soybean molasses and nutrient-supplemented vinasse were evaluated for their effectiveness in solid-state fermentation (SSF). In biomass production, the results demonstrated that all tested compositions favor growth by providing the nutritional demands of the microorganism. Optimum casein peptone and soybean molasses concentration (1.0%, 2.5%, or 4.0%) was determined by a 2((2-0)) factorial experimental design. The results have showed a positive influence of peptone on biomass production. In order to define peptone final concentration (4.0% or 6.0%), a 2(2) factorial experimental design was used. An optimized medium containing 4.0% soybean molasses and 4.0% casein peptone was similar in performance to a synthetic control medium (tryptone soy broth) in dry-heat thermal-resistant spore production by SSF. An experiment performed under optimum SSF conditions resulted in 1.9 x 10(10) CFU g(-1) dry matter with D (160 degrees C) = 5.2 +/- 0.2 min.

Ethylenediamine grafted to graphene oxide@Fe3O4 for chromium(VI) decontamination: Performance, modelling, and fractional factorial design

PubMed Central

Xu, Jiawen; Wu, Cuiyu; Deng, Jianbin; Liao, Wenwei; Ling, Yuxiang; Yang, Yuanxiu; Zhao, Yina; Zhao, Yunlin; Hu, Xi; Wang, Hui; Liu, Yunguo

2017-01-01

A method for grafting ethylenediamine to a magnetic graphene oxide composite (EDA-GO@Fe3O4) was developed for Cr(VI) decontamination. The physicochemical properties of EDA-GO@Fe3O4 were characterized using HRTEM, EDS, FT-IR, TG-DSC, and XPS. The effects of pH, sorbent dose, foreign anions, time, Cr(VI) concentration, and temperature on decontamination process were studied. The solution pH can largely affect the decontamination process. The pseudo-second-order model is suitable for being applied to fit the adsorption processes of Cr(VI) with GO@Fe3O4 and EDA-GO@Fe3O4. The intra-particle diffusion is not the rate-controlling step. Isotherm experimental data can be described using the Freundlich model. The effects of multiple factors on the Cr(VI) decontamination was investigated by a 25−1 fractional factorial design (FFD). The adsorption process can significantly be affected by the main effects of A (pH), B (Cr(VI) concentration), and E (Adsorbent dose). The combined factors of AB (pH × Cr(VI) concentration), AE (pH × Adsorbent dose), and BC (Cr(VI) concentration × Temperature) had larger effects than other factors on Cr(VI) removal. These results indicated that EDA-GO@Fe3O4 is a potential and suitable candidate for treatment of heavy metal wastewater. PMID:29084287

Brain-targeted intranasal zaleplon solid dispersion in hydrophilic carrier system; 23 full-factorial design and in vivo determination of GABA neurotransmitter.

PubMed

Abd-Elrasheed, Eman; Nageeb El-Helaly, Sara; El-Ashmoony, Manal M; Salah, Salwa

2018-05-01

Intranasal zaleplon solid dispersion was formulated to enhance the solubility, bioavailability and deliver an effective therapy. Zaleplon belongs to Class II drugs, and undergoes extensive first-pass metabolism after oral absorption exhibiting 30% bioavailability. A 2 3 full-factorial design was chosen for the investigation of solid dispersion formulations. The effects of different variables include drug to carrier ratio (1:1 and 1:2), carrier type (polyethylene glycol 4000 and poloxamer 407), and preparation method (solvent evaporation and freeze drying) on different dissolution parameters were studied. The dependent variables determined from the in vitro characterization and their constraints were set as follows: minimum mean dissolution time, maximum dissolution efficiency and maximum percentage release. Numerical optimization was performed according to the constraints set based on the utilization of desirability functions. Differential scanning calorimetry, infrared spectroscopy, X-ray diffraction and scanning electron microscopy were performed. Ex vivo estimation of nasal cytotoxicity and assessment of the γ-aminobutyric acid level in plasma and brain 1 h after nasal SD administration in rabbits compared to the oral market product were conducted. The selected ZP-SD, with a desirability 0.9, composed of poloxamer 407 at drug to carrier ratio 1:2 successfully enhanced the bioavailability showing 44% increase in GABA concentration than the marketed tablets.

Properties of bioadhesive ketoprofen liquid suppositories: preparation, determination of gelation temperature, viscosity studies and evaluation of mechanical properties using texture analyzer by 4 × 4 factorial design.

PubMed

Ozgüney, Işık; Kardhiqi, Anita

2014-12-01

Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation temperature, viscosity and mechanical properties. Bioadhesive liquid suppositories were prepared by the cold method using poloxamer 407 (P 407), Poloxamer 188 (P 188) and various amounts of different bioadhesive polymers. Their gelation temperatures, viscosity values and mechanical properties were determined using texture analyzer by 4 × 4 factorial design. It was seen that in presence of KP, gelation temperature of formulation P 407/P 188 (4/20%) significantly decreased from 64 to 37.1 °C. It is to be noted that addition of increasing concentrations of bioadhesive polymers lowered gelation temperature and its decrease was highest with addition of Carbopol 934 P (C). Results of texture profile analysis (TPA) showed that formulations containing C have significantly higher hardness and adhesiveness values than other bioadhesive formulations. According to TPA, gel structure of liquid suppository formulation F5, containing P 407/P 188/KP/C (4/20/2.5/0.8%), exhibited the greatest hardness, compressibilty, adhesiveness and besides greatest viscosity. According to mechanical properties and viscosity values, it was concluded that F5 could be a promising formulation.

Enhancement of the bioavailability of an antihypertensive drug by transdermal protransfersomal system: formulation and in vivo study.

PubMed

Morsi, Nadia M; Aboelwafa, Ahmed A; Dawoud, Marwa H S

2018-06-01

Timolol Maleate (TiM), a nonselective β-adrenergic blocker, is a potent highly effective agent for management of hypertension. The drug suffers from poor oral bioavailability (50%) due to its first pass effect and a short elimination half-life of 4 h; resulting in its frequent administration. Transdermal formulation may circumvent these problems in the form of protransfersomes. The aim of this study is to develop and optimize transdermal protransfersomal system of Timolol Maleate by film deposition on carrier method where protransfersomes were converted to transfersomes upon skin hydration following transdermal application under occlusive conditions. Two 2 3 full factorial designs were employed to investigate the influence of three formulation variables which were; phosphatidyl choline: surfactant molar ratio, carrier: mixture and the type of SAA each on particle size, drug entrapment efficiency and release rate. The optimized formulation was evaluated regarding permeation through hairless rat skin and compared with oral administration of aqueous solution on male Wistar rats. Optimized protransfersomal system had excellent permeation rate through shaved rat skin (780.69 μg/cm 2 /h) and showed six times increase in relative bioavailability with prolonged plasma profile up to 72 h. A potential protransfresomal transdermal system was successfully developed and factorial design was found to be a smart tool in its optimization.

Custom fractional factorial designs to develop atorvastatin self-nanoemulsifying and nanosuspension delivery systems--enhancement of oral bioavailability.

PubMed

Hashem, Fahima M; Al-Sawahli, Majid M; Nasr, Mohamed; Ahmed, Osama A A

2015-01-01

Poor water solubility of a drug is a major challenge in drug delivery research and a main cause for limited bioavailability and pharmacokinetic parameters. This work aims to utilize custom fractional factorial design to assess the development of self-nanoemulsifying drug delivery systems (SNEDDS) and solid nanosuspensions (NS) in order to enhance the oral delivery of atorvastatin (ATR). According to the design, 14 experimental runs of ATR SNEDDS were formulated utilizing the highly ATR solubilizing SNEDDS components: oleic acid, Tween 80, and propylene glycol. In addition, 12 runs of NS were formulated by the antisolvent precipitation-ultrasonication method. Optimized formulations of SNEDDS and solid NS, deduced from the design, were characterized. Optimized SNEDDS formula exhibited mean globule size of 73.5 nm, zeta potential magnitude of -24.1 mV, and 13.5 μs/cm of electrical conductivity. Optimized solid NS formula exhibited mean particle size of 260.3 nm, 7.4 mV of zeta potential, and 93.2% of yield percentage. Transmission electron microscopy showed SNEDDS droplets formula as discrete spheres. The solid NS morphology showed flaky nanoparticles with irregular shapes using scanning electron microscopy. The release behavior of the optimized SNEDDS formula showed 56.78% of cumulative ATR release after 10 minutes. Solid NS formula showed lower rate of release in the first 30 minutes. Bioavailability estimation in Wistar albino rats revealed an augmentation in ATR bioavailability, relative to ATR suspension and the commercial tablets, from optimized ATR SNEDDS and NS formulations by 193.81% and 155.31%, respectively. The findings of this work showed that the optimized nanocarriers enhance the oral delivery and pharmacokinetic profile of ATR.

Virtual patients design and its effect on clinical reasoning and student experience: a protocol for a randomised factorial multi-centre study.

PubMed

Bateman, James; Allen, Maggie E; Kidd, Jane; Parsons, Nick; Davies, David

2012-08-01

Virtual Patients (VPs) are web-based representations of realistic clinical cases. They are proposed as being an optimal method for teaching clinical reasoning skills. International standards exist which define precisely what constitutes a VP. There are multiple design possibilities for VPs, however there is little formal evidence to support individual design features. The purpose of this trial is to explore the effect of two different potentially important design features on clinical reasoning skills and the student experience. These are the branching case pathways (present or absent) and structured clinical reasoning feedback (present or absent). This is a multi-centre randomised 2 x 2 factorial design study evaluating two independent variables of VP design, branching (present or absent), and structured clinical reasoning feedback (present or absent).The study will be carried out in medical student volunteers in one year group from three university medical schools in the United Kingdom, Warwick, Keele and Birmingham. There are four core musculoskeletal topics. Each case can be designed in four different ways, equating to 16 VPs required for the research. Students will be randomised to four groups, completing the four VP topics in the same order, but with each group exposed to a different VP design sequentially. All students will be exposed to the four designs. Primary outcomes are performance for each case design in a standardized fifteen item clinical reasoning assessment, integrated into each VP, which is identical for each topic. Additionally a 15-item self-reported evaluation is completed for each VP, based on a widely used EViP tool. Student patterns of use of the VPs will be recorded.In one centre, formative clinical and examination performance will be recorded, along with a self reported pre and post-intervention reasoning score, the DTI. Our power calculations indicate a sample size of 112 is required for both primary outcomes. This trial will provide robust evidence to support the effectiveness of different designs of virtual patients, based on student performance and evaluation. The cases and all learning materials will be open access and available on a Creative Commons Attribution-Share-Alike license.

Mathematical models of cell factories: moving towards the core of industrial biotechnology.

PubMed

Cvijovic, Marija; Bordel, Sergio; Nielsen, Jens

2011-09-01

Industrial biotechnology involves the utilization of cell factories for the production of fuels and chemicals. Traditionally, the development of highly productive microbial strains has relied on random mutagenesis and screening. The development of predictive mathematical models provides a new paradigm for the rational design of cell factories. Instead of selecting among a set of strains resulting from random mutagenesis, mathematical models allow the researchers to predict in silico the outcomes of different genetic manipulations and engineer new strains by performing gene deletions or additions leading to a higher productivity of the desired chemicals. In this review we aim to summarize the main modelling approaches of biological processes and illustrate the particular applications that they have found in the field of industrial microbiology. © 2010 The Authors. Journal compilation © 2010 Society for Applied Microbiology and Blackwell Publishing Ltd.

Accomplishments of the heavy electron particle accelerator program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Stratakis, D.; Palmer, M.

The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy lepton colliders (HLCs) from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of νe (more » $$\\bar{ve}$$) and $$\\bar{vμ}$$ (νμ) beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components have been obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and the precise physics goals become apparent.« less

Muon Sources for Particle Physics - Accomplishments of the Muon Accelerator Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Stratakis, D.; Palmer, M.

The Muon Accelerator Program (MAP) completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of lepton colliders from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of νe (ν more » $$\\bar{e}$$) and ν $$\\bar{μ}$$) (ν μ) beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components were obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and clearly associated physics goals become apparent« less

Microeconomics of yield learning and process control in semiconductor manufacturing

NASA Astrophysics Data System (ADS)

Monahan, Kevin M.

2003-06-01

Simple microeconomic models that directly link yield learning to profitability in semiconductor manufacturing have been rare or non-existent. In this work, we review such a model and provide links to inspection capability and cost. Using a small number of input parameters, we explain current yield management practices in 200mm factories. The model is then used to extrapolate requirements for 300mm factories, including the impact of technology transitions to 130nm design rules and below. We show that the dramatic increase in value per wafer at the 300mm transition becomes a driver for increasing metrology and inspection capability and sampling. These analyses correlate well wtih actual factory data and often identify millions of dollars in potential cost savings. We demonstrate this using the example of grating-based overlay metrology for the 65nm node.

Optimization of thiamethoxam adsorption parameters using multi-walled carbon nanotubes by means of fractional factorial design.

PubMed

Panić, Sanja; Rakić, Dušan; Guzsvány, Valéria; Kiss, Erne; Boskovic, Goran; Kónya, Zoltán; Kukovecz, Ákos

2015-12-01

The aim of this work was to evaluate significant factors affecting the thiamethoxam adsorption efficiency using oxidized multi-walled carbon nanotubes (MWCNTs) as adsorbents. Five factors (initial solution concentration of thiamethoxam in water, temperature, solution pH, MWCNTs weight and contact time) were investigated using 2V(5-1) fractional factorial design. The obtained linear model was statistically tested using analysis of variance (ANOVA) and the analysis of residuals was used to investigate the model validity. It was observed that the factors and their second-order interactions affecting the thiamethoxam removal can be divided into three groups: very important, moderately important and insignificant ones. The initial solution concentration was found to be the most influencing parameter on thiamethoxam adsorption from water. Optimization of the factors levels was carried out by minimizing those parameters which are usually critical in real life: the temperature (energy), contact time (money) and weight of MWCNTs (potential health hazard), in order to maximize the adsorbed amount of the pollutant. The results of maximal adsorbed thiamethoxam amount in both real and optimized experiments indicate that among minimized parameters the adsorption time is one that makes the largest difference. The results of this study indicate that fractional factorial design is very useful tool for screening the higher number of parameters and reducing the number of adsorption experiments. Copyright © 2015 Elsevier Ltd. All rights reserved.

D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

EPA Science Inventory

Humans are exposed to mixtures of environmental compounds. A regulatory assumption is that the mixtures of chemicals act in an additive manner. However, this assumption requires experimental validation. Traditional experimental designs (full factorial) require a large number of e...

A Hospital Is Not Just a Factory, but a Complex Adaptive System-Implications for Perioperative Care.

PubMed

Mahajan, Aman; Islam, Salim D; Schwartz, Michael J; Cannesson, Maxime

2017-07-01

Many methods used to improve hospital and perioperative services productivity and quality of care have assumed that the hospital is essentially a factory, and therefore, that industrial engineering and manufacturing-derived redesign approaches such as Six Sigma and Lean can be applied to hospitals and perioperative services just as they have been applied in factories. However, a hospital is not merely a factory but also a complex adaptive system (CAS). The hospital CAS has many subsystems, with perioperative care being an important one for which concepts of factory redesign are frequently advocated. In this article, we argue that applying only factory approaches such as lean methodologies or process standardization to complex systems such as perioperative care could account for difficulties and/or failures in improving performance in care delivery. Within perioperative services, only noncomplex/low-variance surgical episodes are amenable to manufacturing-based redesign. On the other hand, complex surgery/high-variance cases and preoperative segmentation (the process of distinguishing between normal and complex cases) can be viewed as CAS-like. These systems tend to self-organize, often resist or react unpredictably to attempts at control, and therefore require application of CAS principles to modify system behavior. We describe 2 examples of perioperative redesign to illustrate the concepts outlined above. These examples present complementary and contrasting cases from 2 leading delivery systems. The Mayo Clinic example illustrates the application of manufacturing-based redesign principles to a factory-like (high-volume, low-risk, and mature practice) clinical program, while the Kaiser Permanente example illustrates the application of both manufacturing-based and self-organization-based approaches to programs and processes that are not factory-like but CAS-like. In this article, we describe how factory-like processes and CAS can coexist within a hospital and how self-organization-based approaches can be used to improve care delivery in many situations where manufacturing-based approaches may not be appropriate.

Analytical method development of nifedipine and its degradants binary mixture using high performance liquid chromatography through a quality by design approach

NASA Astrophysics Data System (ADS)

Choiri, S.; Ainurofiq, A.; Ratri, R.; Zulmi, M. U.

2018-03-01

Nifedipin (NIF) is a photo-labile drug that easily degrades when it exposures a sunlight. This research aimed to develop of an analytical method using a high-performance liquid chromatography and implemented a quality by design approach to obtain effective, efficient, and validated analytical methods of NIF and its degradants. A 22 full factorial design approach with a curvature as a center point was applied to optimize of the analytical condition of NIF and its degradants. Mobile phase composition (MPC) and flow rate (FR) as factors determined on the system suitability parameters. The selected condition was validated by cross-validation using a leave one out technique. Alteration of MPC affected on time retention significantly. Furthermore, an increase of FR reduced the tailing factor. In addition, the interaction of both factors affected on an increase of the theoretical plates and resolution of NIF and its degradants. The selected analytical condition of NIF and its degradants has been validated at range 1 – 16 µg/mL that had good linearity, precision, accuration and efficient due to an analysis time within 10 min.

Family context assessment in a public health study.

PubMed

Velasco, David; Sánchez de Miguel, Manuel; Egurza, Maitane; Arranz, Enrique; Aranbarri, Aritz; Fano, Eduardo; Ibarluzea, Jesús

2014-01-01

To analyze the factorial structure of a new instrument to assess the quality of the family context (Etxadi-Gangoiti Scale) in a sample from the Gipuzkoa cohort of the Environment and Childhood (Infancia y Medio Ambiente [INMA]) study. Families in a sample of 433 two-year-old children were assessed in a home visit with subsequent analysis of the factorial structure and psychometric properties of the data. An exploratory factorial analysis (principal axis factoring and varimax rotation) and a confirmatory factorial analysis were carried out; partial confirmation of the original factorial structure of the instrument was obtained, which revealed the following factorial structures. Subscale (1): promotion of cognitive and linguistic development, social skills, psychomotor skills, and pretend play and imitation; subscale (2): promotion of independence and self-esteem, provision of optimal frustration, social and emotional quality of the relationship, and absence of physical punishment; subscale (3): paternal involvement, low exposure to family conflict, low frequency of family conflict, relationship with the extended family, social support, diversity of experiences, low frequency of stressful events, and low parental perception of stress. The structure of the original instrument structure was partially confirmed, which was attributed to the characteristics of the sample. We stress the importance of the variability obtained in the evaluation of the families, as well as of adequate indicators of reliability in such evaluation. The new instrument could be used in public health to identify deficient family contexts and to design preventive interventions focused on parenting skills. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Evaluation of different recruitment and randomisation methods in a trial of general practitioner-led interventions to increase physical activity: a randomised controlled feasibility study with factorial design

PubMed Central

2014-01-01

Background Interventions promoting physical activity by General Practitioners (GPs) lack a strong evidence base. Recruiting participants to trials in primary care is challenging. We investigated the feasibility of (i) delivering three interventions to promote physical activity in inactive participants and (ii) different methods of participant recruitment and randomised allocation. Methods We recruited general practices from Devon, Bristol and Coventry. We used a 2-by-2 factorial design for participant recruitment and randomisation. Recruitment strategies were either opportunistic (approaching patients attending their GP surgery) or systematic (selecting patients from practice lists and approaching them by letter). Randomisation strategies were either individual or by practice cluster. Feasibility outcomes included time taken to recruit the target number of participants within each practice. Participants were randomly allocated to one of three interventions: (i) written advice (control); (ii) brief GP advice (written advice plus GP advice on physical activity), and (iii) brief GP advice plus a pedometer to self-monitor physical activity during the trial. Participants allocated to written advice or brief advice each received a sealed pedometer to record their physical activity, and were instructed not to unseal the pedometer before the scheduled day of data collection. Participant level outcomes were reported descriptively and included the mean number of pedometer steps over a 7-day period, and European Quality of Life (EuroQoL)-5 dimensions (EQ-5D) scores, recorded at 12 weeks’ follow-up. Results We recruited 24 practices (12 using each recruitment method; 18 randomising by cluster, 6 randomising by individual participant), encompassing 131 participants. Opportunistic recruitment was associated with less time to target recruitment compared with systematic (mean difference (days) -54.9, 95% confidence interval (CI) -103.6; -6.2) but with greater loss to follow up (28.8% versus. 6.9%; mean difference 21.9% (95% CI 9.6%; 34.1%)). There were differences in the socio-demographic characteristics of participants according to recruitment method. There was no clear pattern of change in participant level outcomes from baseline to 12 weeks across the three arms. Conclusions Delivering and trialling GP-led interventions to promote physical activity is feasible, but trial design influences time to participant recruitment, participant withdrawal, and possibly, the socio-demographic characteristics of participants. Trial registration number ISRCTN73725618. PMID:24746263

Adequacy of different experimental designs for eucalyptus spacing trials in Portuguese environmental conditions

Treesearch

Paula Soares; Margarida Tome

2000-01-01

In Portugal, several eucalyptus spacing trials cover a relatively broad range of experimental designs: trials with a non-randomized block design with plots of different size and number of trees per plot; trials based on a non-systematic design in which spacings were randomized resulting in a factorial arrangement with plots of different size and shape and equal number...

Development of a low cost integrated 15 kW A.C. solar tracking sub-array for grid connected PV power system applications

NASA Astrophysics Data System (ADS)

Stern, M.; West, R.; Fourer, G.; Whalen, W.; Van Loo, M.; Duran, G.

1997-02-01

Utility Power Group has achieved a significant reduction in the installed cost of grid-connected PV systems. The two part technical approach focused on 1) The utilization of a large area factory assembled PV panel, and 2) The integration and packaging of all sub-array power conversion and control functions within a single factory produced enclosure. Eight engineering prototype 15kW ac single axis solar tracking sub-arrays were designed, fabricated, and installed at the Sacramento Municipal Utility District's Hedge Substation site in 1996 and are being evaluated for performance and reliability. A number of design enhancements will be implemented in 1997 and demonstrated by the field deployment and operation of over twenty advanced sub-array PV power systems.

Influence of hydroxypropyl methylcellulose on drug release pattern of a gastroretentive floating drug delivery system using a 3(2) full factorial design.

PubMed

Swain, Kalpana; Pattnaik, Satyanarayan; Mallick, Subrata; Chowdary, Korla Appana

2009-01-01

In the present investigation, controlled release gastroretentive floating drug delivery system of theophylline was developed employing response surface methodology. A 3(2) randomized full factorial design was developed to study the effect of formulation variables like various viscosity grades and contents of hydroxypropyl methylcellulose (HPMC) and their interactions on response variables. The floating lag time for all nine experimental trial batches were less than 2 min and floatation time of more than 12 h. Theophylline release from the polymeric matrix system followed non-Fickian anomalous transport. Multiple regression analysis revealed that both viscosity and content of HPMC had statistically significant influence on all dependent variables but the effect of these variables found to be nonlinear above certain threshold values.

Evaluation of a laser scanner for large volume coordinate metrology: a comparison of results before and after factory calibration

NASA Astrophysics Data System (ADS)

Ferrucci, M.; Muralikrishnan, B.; Sawyer, D.; Phillips, S.; Petrov, P.; Yakovlev, Y.; Astrelin, A.; Milligan, S.; Palmateer, J.

2014-10-01

Large volume laser scanners are increasingly being used for a variety of dimensional metrology applications. Methods to evaluate the performance of these scanners are still under development and there are currently no documentary standards available. This paper describes the results of extensive ranging and volumetric performance tests conducted on a large volume laser scanner. The results demonstrated small but clear systematic errors that are explained in the context of a geometric error model for the instrument. The instrument was subsequently returned to the manufacturer for factory calibration. The ranging and volumetric tests were performed again and the results are compared against those obtained prior to the factory calibration.

Enhancing the Effectiveness of Smoking Treatment Research: Conceptual Bases and Progress

PubMed Central

Baker, Timothy B.; Collins, Linda M.; Mermelstein, Robin; Piper, Megan E.; Schlam, Tanya R.; Cook, Jessica W.; Bolt, Daniel M.; Smith, Stevens S.; Jorenby, Douglas E.; Fraser, David; Loh, Wei-Yin; Theobald, Wendy E.; Fiore, Michael C.

2015-01-01

Background and aims A chronic care strategy could potentially enhance the reach and effectiveness of smoking treatment by providing effective interventions for all smokers, including those who are initially unwilling to quit. This paper describes the conceptual bases of a National Cancer Institute-funded research program designed to develop an optimized, comprehensive, chronic care smoking treatment. Methods This research is grounded in three methodological approaches: 1) the Phase-Based Model, which guides the selection of intervention components to be experimentally evaluated for the different phases of smoking treatment (motivation, preparation, cessation, and maintenance); 2) the Multiphase Optimization Strategy (MOST), which guides the screening of intervention components via efficient experimental designs and, ultimately, the assembly of promising components into an optimized treatment package; and 3) pragmatic research methods, such as electronic health record recruitment, that facilitate the efficient translation of research findings into clinical practice. Using this foundation and working in primary care clinics, we conducted three factorial experiments (reported in three accompanying articles) to screen 15 motivation, preparation, cessation, and maintenance phase intervention components for possible inclusion in a chronic care smoking treatment program. Results This research identified intervention components with relatively strong evidence of effectiveness at particular phases of smoking treatment and it demonstrated the efficiency of the MOST approach in terms both of the number of intervention components tested and of the richness of the information yielded. Conclusions A new, synthesized research approach efficiently evaluates multiple intervention components to identify promising components for every phase of smoking treatment. Many intervention components interact with one another, supporting the use of factorial experiments in smoking treatment development. PMID:26581974

Optimisation of warpage on plastic injection moulding part using response surface methodology (RSM)

NASA Astrophysics Data System (ADS)

Miza, A. T. N. A.; Shayfull, Z.; Nasir, S. M.; Fathullah, M.; Rashidi, M. M.

2017-09-01

The warpage is often encountered which occur during injection moulding process of thin shell part depending the process condition. The statistical design of experiment method which are Integrating Finite Element (FE) Analysis, moldflow analysis and response surface methodology (RSM) are the stage of few ways in minimize the warpage values of x,y and z on thin shell plastic parts that were investigated. A battery cover of a remote controller is one of the thin shell plastic part that produced by using injection moulding process. The optimum process condition parameter were determined as to achieve the minimum warpage from being occur. Packing pressure, Cooling time, Melt temperature and Mould temperature are 4 parameters that considered in this study. A two full factorial experimental design was conducted in Design Expert of RSM analysis as to combine all these parameters study. FE analysis result gain from analysis of variance (ANOVA) method was the one of the important process parameters influenced warpage. By using RSM, a predictive response surface model for warpage data will be shown.

75 FR 9157 - Proposed Information Collection; Comment Request; Alaska Region Scale and Catch Weighing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... and catch weighing requirements address performance standards designed to ensure that all catch... motherships is based on the vessel meeting a series of design criteria. Because of the wide variations in factory layout for inshore processors, NMFS requires a performance-based catch monitoring system for...

75 FR 52507 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... standards designed to ensure that all catch delivered to the processor is accurately weighed and accounted... NMFS for catcher/processors and motherships is based on the vessel meeting a series of design criteria. Because of the wide variations in factory layout for inshore processors, NMFS requires a performance-based...

POWER AND SAMPLE SIZE CALCULATIONS FOR LINEAR HYPOTHESES ASSOCIATED WITH MIXTURES OF MANY COMPONENTS USING FIXED-RATIO RAY DESIGNS

EPA Science Inventory

Response surface methodology, often supported by factorial designs, is the classical experimental approach that is widely accepted for detecting and characterizing interactions among chemicals in a mixture. In an effort to reduce the experimental effort as the number of compound...

Applications of Chemiluminescence in the Teaching of Experimental Design

ERIC Educational Resources Information Center

Krawczyk, Tomasz; Slupska, Roksana; Baj, Stefan

2015-01-01

This work describes a single-session laboratory experiment devoted to teaching the principles of factorial experimental design. Students undertook the rational optimization of a luminol oxidation reaction, using a two-level experiment that aimed to create a long-lasting bright emission. During the session students used only simple glassware and…

Exploring Fashion Design.

ERIC Educational Resources Information Center

Arata, Barbara

The purpose of the curriculum guide is to introduce the exploratory student to the fundamental skills and knowledge necessary for employment in the garment industry, from factory to design room. It was developed for a six or seven-week exploratory program for ninth or tenth grade students. The manual provides an introduction to the different areas…

Evaluation of an Online "Teachable Moment" Dietary Intervention

ERIC Educational Resources Information Center

Marks, Leah; Ogden, Jane

2017-01-01

Purpose: The purpose of this paper is to evaluate an online "teachable moment" intervention to promote healthy eating for overweight and food intolerance symptoms. Design/methodology/approach: The study involves a 2×2 factorial design with two conditions: group (weight loss vs food intolerance) and condition (intervention vs control).…

Computer-assisted design in perceptual-motor skills research

NASA Technical Reports Server (NTRS)

Rogers, C. A., Jr.

1974-01-01

A categorization was made of independent variables previously found to be potent in simple perceptual-motor tasks. A computer was then used to generate hypothetical factorial designs. These were evaluated in terms of literature trends and pragmatic criteria. Potential side-effects of machine-assisted research strategy were discussed.

Headspace profiling of cocaine samples for intelligence purposes.

PubMed

Dujourdy, Laurence; Besacier, Fabrice

2008-08-06

A method for determination of residual solvents in illicit hydrochloride cocaine samples using static headspace-gas chromatography (HS-GC) associated with a storage computerized procedure is described for the profiling and comparison of seizures. The system involves a gas chromatographic separation of 18 occluded solvents followed by fully automatic data analysis and transfer to a PHP/MySQL database. First, a fractional factorial design was used to evaluate the main effects of some critical method parameters (salt choice, vial agitation intensity, oven temperature, pressurization and loop equilibration) on the results with a minimum of experiments. The method was then validated for tactical intelligence purposes (batch comparison) via several studies: selection of solvents and mathematical comparison tool, reproducibility and "cutting" influence studies. The decision threshold to determine the similarity of two samples was set and false positives and negatives evaluated. Finally, application of the method to distinguish geographical origins is discussed.

Metallographic examination of the structure of the metal of cold arms of the nineteenth-early twentieth centuries made at the Zlatoust arms factory

NASA Astrophysics Data System (ADS)

Schastlivtsev, V. M.; Rodionov, D. P.; Gerasimov, V. Yu.; Khlebnikova, Yu. V.

2010-11-01

Data are given concerning the structure and the chemical composition of carbon steel used for making cold arms, which was produced at the Zlatoust arms factory in the nineteenth and early twentieth centuries. The results of the analysis of the structure of metal demonstrates the general trend of the development of metallurgy both at the Ural plants and in the world: from the creation of the crucible methods of production of cast steel to the mass production of cast steel by the Bessemer and Martin methods.

Resin Dermatitis in a Car Factory

PubMed Central

Engel, H. O.; Calnan, C. D.

1966-01-01

An outbreak of dermatitis in a car assembly factory is described; it affected 50 workers who handled rubber weatherstrips coated with an adhesive. The adhesive was found to contain para-tertiary butyl phenol (P.T.B.P.) formaldehyde resin. Of those patch tested 70% gave positive reactions to the adhesive and 65% to the resin. Improved methods of handling and personal protection succeeded in arresting the occurrence of dermatitis. Barrier creams gave no protection in these circumstances. The episode illustrates the different preventive control methods which have to be tried when dealing with a simple skin hazard which cannot be abolished. Images PMID:5904100

Optimization of the Critical Parameters of the Spherical Agglomeration Crystallization Method by the Application of the Quality by Design Approach.

PubMed

Gyulai, Orsolya; Kovács, Anita; Sovány, Tamás; Csóka, Ildikó; Aigner, Zoltán

2018-04-20

This research work presents the use of the Quality by Design (QbD) concept for optimization of the spherical agglomeration crystallization method in the case of the active agent, ambroxol hydrochloride (AMB HCl). AMB HCl spherical crystals were formulated by the spherical agglomeration method, which was applied as an antisolvent technique. Spherical crystals have good flowing properties, which makes the direct compression tableting method applicable. This means that the amount of additives used can be reduced and smaller tablets can be formed. For the risk assessment, LeanQbD Software was used. According to its results, four independent variables (mixing type and time, dT (temperature difference between solvent and antisolvent), and composition (solvent/antisolvent volume ratio)) and three dependent variables (mean particle size, aspect ratio, and roundness) were selected. Based on these, a 2⁻3 mixed-level factorial design was constructed, crystallization was accomplished, and the results were evaluated using Statistica for Windows 13 program. Product assay was performed and it was revealed that improvements in the mean particle size (from ~13 to ~200 µm), roundness (from ~2.4 to ~1.5), aspect ratio (from ~1.7 to ~1.4), and flow properties were observed while polymorphic transitions were avoided.

Overall uncertainty measurement for near infrared analysis of cryptotanshinone in tanshinone extract

NASA Astrophysics Data System (ADS)

Xue, Zhong; Xu, Bing; Shi, Xinyuan; Yang, Chan; Cui, Xianglong; Luo, Gan; Qiao, Yanjiang

2017-01-01

This study presented a new strategy of overall uncertainty measurement for near infrared (NIR) quantitative analysis of cryptotanshinone in tanshinone extract powders. The overall uncertainty of NIR analysis from validation data of precision, trueness and robustness study was fully investigated and discussed. Quality by design (QbD) elements, such as risk assessment and design of experiment (DOE) were utilized to organize the validation data. An "I × J × K" (series I, the number of repetitions J and level of concentrations K) full factorial design was used to calculate uncertainty from the precision and trueness data. And a 27-4 Plackett-Burmann matrix with four different influence factors resulted from the failure mode and effect analysis (FMEA) analysis was adapted for the robustness study. The overall uncertainty profile was introduced as a graphical decision making tool to evaluate the validity of NIR method over the predefined concentration range. In comparison with the T. Saffaj's method (Analyst, 2013, 138, 4677.) for overall uncertainty assessment, the proposed approach gave almost the same results, demonstrating that the proposed method was reasonable and valid. Moreover, the proposed method can help identify critical factors that influence the NIR prediction performance, which could be used for further optimization of the NIR analytical procedures in routine use.

Microwave-assisted extraction at atmospheric pressure coupled to different clean-up methods for the determination of organophosphorus pesticides in olive and avocado oil.

PubMed

Fuentes, Edwar; Báez, María E; Díaz, Juan

2009-12-18

An effective extraction method was devised for the determination of organophosphorus pesticides (OPPs) in olive and avocado oil samples, using atmospheric pressure microwave-assisted liquid-liquid extraction (APMAE) and solid-phase extraction or low-temperature precipitation as clean-up step. A simple glass system equipped with an air-cooled condenser was designed as an extraction vessel. The pesticides were partitioned between acetonitrile and oil solution in hexane. Analytical determinations were carried out by gas chromatography-flame photometric detection and gas chromatography-tandem mass spectrometry, using a triple quadrupole mass analyzer, for confirmation purposes. Several factors influencing the extraction efficiency were investigated and optimized through fractional factorial design and Doehlert design. Under optimal conditions the recovery of pesticides from oil at 0.025 microg g(-1) ranged from 71% to 103%, except for fenthion in avocado oil, with RSDs < or = 13% (n=5). The LOQ for the entire method ranged from 0.004 to 0.015 microg g(-1). Finally, the proposed method was successfully applied to the extraction and determination of the selected pesticides in 20 commercially packed extra virgin olive oils and four commercially packed avocado oils produced in Chile. Detectable residues of different OPPs were observed in 85% of samples.

Nonmedical influences on medical decision making: an experimental technique using videotapes, factorial design, and survey sampling.

PubMed Central

Feldman, H A; McKinlay, J B; Potter, D A; Freund, K M; Burns, R B; Moskowitz, M A; Kasten, L E

1997-01-01

OBJECTIVE: To study nonmedical influences on the doctor-patient interaction. A technique using simulated patients and "real" doctors is described. DATA SOURCES: A random sample of physicians, stratified on such characteristics as demographics, specialty, or experience, and selected from commercial and professional listings. STUDY DESIGN: A medical appointment is depicted on videotape by professional actors. The patient's presenting complaint (e.g., chest pain) allows a range of valid interpretation. Several alternative versions are taped, featuring the same script with patient-actors of different age, sex, race, or other characteristics. Fractional factorial design is used to select a balanced subset of patient characteristics, reducing costs without biasing the outcome. DATA COLLECTION: Each physician is shown one version of the videotape appointment and is asked to describe how he or she would diagnose or treat such a patient. PRINCIPAL FINDINGS: Two studies using this technique have been completed to date, one involving chest pain and dyspnea and the other involving breast cancer. The factorial design provided sufficient power, despite limited sample size, to demonstrate with statistical significance various influences of the experimental and stratification variables, including the patient's gender and age and the physician's experience. Persistent recruitment produced a high response rate, minimizing selection bias and enhancing validity. CONCLUSION: These techniques permit us to determine, with a degree of control unattainable in observational studies, whether medical decisions as described by actual physicians and drawn from a demographic or professional group of interest, are influenced by a prescribed set of nonmedical factors. PMID:9240285

A systems-level approach for metabolic engineering of yeast cell factories.

PubMed

Kim, Il-Kwon; Roldão, António; Siewers, Verena; Nielsen, Jens

2012-03-01

The generation of novel yeast cell factories for production of high-value industrial biotechnological products relies on three metabolic engineering principles: design, construction, and analysis. In the last two decades, strong efforts have been put on developing faster and more efficient strategies and/or technologies for each one of these principles. For design and construction, three major strategies are described in this review: (1) rational metabolic engineering; (2) inverse metabolic engineering; and (3) evolutionary strategies. Independent of the selected strategy, the process of designing yeast strains involves five decision points: (1) choice of product, (2) choice of chassis, (3) identification of target genes, (4) regulating the expression level of target genes, and (5) network balancing of the target genes. At the construction level, several molecular biology tools have been developed through the concept of synthetic biology and applied for the generation of novel, engineered yeast strains. For comprehensive and quantitative analysis of constructed strains, systems biology tools are commonly used and using a multi-omics approach. Key information about the biological system can be revealed, for example, identification of genetic regulatory mechanisms and competitive pathways, thereby assisting the in silico design of metabolic engineering strategies for improving strain performance. Examples on how systems and synthetic biology brought yeast metabolic engineering closer to industrial biotechnology are described in this review, and these examples should demonstrate the potential of a systems-level approach for fast and efficient generation of yeast cell factories. © 2011 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

Quantitative impurity analysis of monoclonal antibody size heterogeneity by CE-LIF: example of development and validation through a quality-by-design framework.

PubMed

Michels, David A; Parker, Monica; Salas-Solano, Oscar

2012-03-01

This paper describes the framework of quality by design applied to the development, optimization and validation of a sensitive capillary electrophoresis-sodium dodecyl sulfate (CE-SDS) assay for monitoring impurities that potentially impact drug efficacy or patient safety produced in the manufacture of therapeutic MAb products. Drug substance or drug product samples are derivatized with fluorogenic 3-(2-furoyl)quinoline-2-carboxaldehyde and nucleophilic cyanide before separation by CE-SDS coupled to LIF detection. Three design-of-experiments enabled critical labeling parameters to meet method requirements for detecting minor impurities while building precision and robustness into the assay during development. The screening design predicted optimal conditions to control labeling artifacts while two full factorial designs demonstrated method robustness through control of temperature and cyanide parameters within the normal operating range. Subsequent validation according to the guidelines of the International Committee of Harmonization showed the CE-SDS/LIF assay was specific, accurate, and precise (RSD ≤ 0.8%) for relative peak distribution and linear (R > 0.997) between the range of 0.5-1.5 mg/mL with LOD and LOQ of 10 ng/mL and 35 ng/mL, respectively. Validation confirmed the system suitability criteria used as a level of control to ensure reliable method performance. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

On Improved Least Squares Regression and Artificial Neural Network Meta-Models for Simulation via Control Variates

DTIC Science & Technology

2016-09-15

18] under the context of robust parameter design for simulation. Bellucci’s technique is used in this research, primarily because the interior -point...Fundamentals of Radial Basis Neural Network (RBNN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 1.2.2.2 Design of Experiments...with Neural Nets . . . . . . . . . . . . . 31 1.2.2.3 Factorial Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 1.2.2.4

The Use of Visual Advance Organizers for Learning Earth Science Concepts.

ERIC Educational Resources Information Center

Weisberg, Joseph S.

This study was designed to determine whether advance organizers in the form of visual aids might serve the same function as Ausubel's verbal advance organizers. The basic design of the study consisted of a 4 X 3 X 2 ANOVA factorial design. Ninety-six eighth-grade students were involved in the study. One group was exposed to a physiographic diagram…

Biological monitoring as proficient assessment method in chronic exposure to irritating gases and vapors.

PubMed

Szász, Zsuzsánna; Abrám, Z; Szász, L; Moldovan, H; Demeter, Annamária

2013-01-01

Air pollution and its adverse health effect represent a global issue. Long term or permanent exposure at low doses of toxic material may increase the number of new appeared severe respiratory diseases and may aggravate most of the existing chronic cases. In the present study, the main toxic aerosols released by the greatest chemical factory in Transylvania were analyzed and their health impacts were measured. We have used in our trial biologic monitoring 1786 employees from a chemical factory in a transversal descriptive study. In the same time, we have noticed environmental determination of air quality and also, we have checked the health status and other 90 cases from a nonchemical factory. In this factory there are also pneumotrop harms. Results of our study give useful information regarding workers health status, with possibility to make pollution-medical condition association: there was no significant association between occurrence of decreased lung function tests and exposure of chemical irritants compared to the second investigated factory. Exposure to pneumotrope hazards imposes safeguards to protect health and biological monitoring has proven absolutely necessary to do so. Last but not least, lifestyle monitoring is to be effective.

"Controlling ourselves, by ourselves": risk assemblages on Malaysia's assembly lines.

PubMed

Root, Robin

2008-01-01

Since the early 1990s, the Malaysian government has identified factories as high risk for HIV and AIDS. Signaling epidemiological concerns over the rising rates of HIV among factory workers, a significant proportion of whom are women, the label also appeared to reconstitute stereotypes of factory women as dangerously sexual and of factories as immoral spaces. Drawing on ethnographic research in the export processing zones of Penang, Malaysia in the mid-1990s, I examine the meanings and experiences of HIV risk among factory women themselves. Data were analyzed using discourse and grounded theory methods, the former to identify women's multiple modes of rationalizing HIV risks, and the latter to theorize the sources and significance of women's HIV risk assemblages. The heuristic of assemblages as localized knowledge spaces helped to show that biomedical and socioreligious risk lexica operated not as fixed epistemological categories but as situational resources in women's risk scripts. Overall, women desired multiple risk knowledges to help them "control themselves by themselves," a project of reflexive self-shaping mediated by the diverse and discordant discourses of gender, ethnicity, and modernity in Malaysia that shaped how HIV risks were engendered and experienced.

Recent Developments in Fibers for Telecommunications

NASA Astrophysics Data System (ADS)

Caronna, V.; Cocchini, F.; Collaro, A.; Cuomo, D.; Ruzzier, M.; Schiaffo, A.; Terruzzi, L.; Valls, A.

Formerly known as Pirelli Cables and Systems, Prysmian Cables & Systems was founded in 2005, incorporating all previous Pirelli assets: "same knowledge, different names." Established in 1879, the company has more than 50 factories worldwide, operating in energy and telecommunications sectors. The main fiber manufacturing facility, Fibre Ottiche Sud (FOS), located in Italy, is operating since 1984 using the outside vapor deposition (OVD) technology and adopting today a proprietary coating system, Neon Plus. More than 40 Mkm of fibers produced in all Prysmian factories have been installed worldwide until now. Research activities are extensively carried out both in the headquarters based in Milan, Italy, and in several developments in different factories. This article will present the more noticeable results achieved in the past few years in developing Prysmian products out of its different activities in telecommunications, specifically in the optical fiber sector, while leaving to published papers the description of developments in cable design and connectivity products [1, 2].

Characterization and control of thread mould in cheese.

PubMed

Basílico, J C; debasílico, M Z; Chiericatti, C; Vinderola, C G

2001-06-01

The origin of a mould responsible for the contamination of an Argentinian cheese factory was identified and several antifungal treatments were assessed. Moulds were isolated and identified from vacuum-packed hard cheeses, from the environment and from the surfaces of the factory. A suspension conidia test containing different fungicides was performed; another assay involved the fumigation with p-OH fenilsalicidamide. Only Phoma glomerata was found in all of the mouldy cheeses, and was also obtained from different environments and machine surfaces. The most effective treatments against P. glomerata isolates were 0.5% (w/v) natamycin and 2% (v/v) parabens. Fumigation with p-OH fenilsalicidamide showed no satisfactory results. P. glomerata is an important thread mould-contaminating agent in vacuum-packed hard cheeses. Taking into account the survival of the conidia of the P. glomerata isolates to different antifungal treatments, the sources of contamination need to be controlled by designing a good factory layout.

Polychlorinated dibenzo-p-dioxins and dibenzofurans and their association with cancer mortality among workers in one automobile foundry factory.

PubMed

Wang, Lihua; Weng, Shaofan; Wen, Sheng; Shi, Tingming; Sun, Gangtao; Zeng, Yuyu; Qi, Cheng; Chen, Weihong

2013-01-15

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) have been reported as possible carcinogenic hazards to humans. However, epidemiological studies on their carcinogenic roles are limited. The current study was designed to determine the concentrations and characteristics of PCDD/Fs and evaluate their association with cancer mortality in exposed workers in one automobile foundry factory. PCDD/F levels in factory and surrounding environment were analyzed through air and settling dust sampling. The cancer mortalities among workers in this foundry factory were calculated using data from a cohort study. The results showed that the PCDD/F concentrations of air in workplace ranged 0.36-2.25 pg World Health Organization-Toxic Equivalent (WHO-TEQ) Nm(-3) (average 1.01 pg WHO-TEQ Nm(-3)), which were 1.16-7.26 times higher than those outside the factory. The PCDD/F concentrations of settling dust in the workplace ranged 3.34-18.64 pg WHO-TEQ g(-1) (average 8.25 pg WHO-TEQ g(-1)), which were lower than those just outside the factory (average 16.13 pg WHO-TEQ g(-1)). Furthermore, a cohort study of workers in this factory with average follow-up of 24.52 years showed that cancer was the leading cause of death, with significant elevated mortality (standardized mortality ratio (SMR)=1.70, 95% confidence interval (CI): 1.35-2.13) among workers, when compared with Chinese national mortality. The cancer mortality among front-line workers was increased significantly (adjusted relative risk (RR)=1.73, 95% CI: 1.14-2.60), particularly among melting and casting workers, when compared with that among assistant workers. Our results indicated that there was a dose-response relationship between PCDD/F exposure and cancer mortality among foundry workers. Copyright © 2012 Elsevier B.V. All rights reserved.

Development of a Direct Spectrophotometric and Chemometric Method for Determining Food Dye Concentrations.

PubMed

Arroz, Erin; Jordan, Michael; Dumancas, Gerard G

2017-07-01

An ultraviolet visible (UV-Vis) spectrophotometric and partial least squares (PLS) chemometric method was developed for the simultaneous determination of erythrosine B (red), Brilliant Blue, and tartrazine (yellow) dyes. A training set (n = 64) was generated using a full factorial design and its accuracy was tested in a test set (n = 13) using a Box-Behnken design. The test set garnered a root mean square error (RMSE) of 1.79 × 10 -7 for blue, 4.59 × 10 -7 for red, and 1.13 × 10 -6 for yellow dyes. The relatively small RMSE suggests only a small difference between predicted versus measured concentrations, demonstrating the accuracy of our model. The relative error of prediction (REP) for the test set were 11.73%, 19.52%, 19.38%, for blue, red, and yellow dyes, respectively. A comparable overlay between the actual candy samples and their replicated synthetic spectra were also obtained indicating the model as a potentially accurate method for determining concentrations of dyes in food samples.

Testing Mean Differences among Groups: Multivariate and Repeated Measures Analysis with Minimal Assumptions

PubMed Central

Bathke, Arne C.; Friedrich, Sarah; Pauly, Markus; Konietschke, Frank; Staffen, Wolfgang; Strobl, Nicolas; Höller, Yvonne

2018-01-01

ABSTRACT To date, there is a lack of satisfactory inferential techniques for the analysis of multivariate data in factorial designs, when only minimal assumptions on the data can be made. Presently available methods are limited to very particular study designs or assume either multivariate normality or equal covariance matrices across groups, or they do not allow for an assessment of the interaction effects across within-subjects and between-subjects variables. We propose and methodologically validate a parametric bootstrap approach that does not suffer from any of the above limitations, and thus provides a rather general and comprehensive methodological route to inference for multivariate and repeated measures data. As an example application, we consider data from two different Alzheimer’s disease (AD) examination modalities that may be used for precise and early diagnosis, namely, single-photon emission computed tomography (SPECT) and electroencephalogram (EEG). These data violate the assumptions of classical multivariate methods, and indeed classical methods would not have yielded the same conclusions with regards to some of the factors involved. PMID:29565679

An effective hybrid immune algorithm for solving the distributed permutation flow-shop scheduling problem

NASA Astrophysics Data System (ADS)

Xu, Ye; Wang, Ling; Wang, Shengyao; Liu, Min

2014-09-01

In this article, an effective hybrid immune algorithm (HIA) is presented to solve the distributed permutation flow-shop scheduling problem (DPFSP). First, a decoding method is proposed to transfer a job permutation sequence to a feasible schedule considering both factory dispatching and job sequencing. Secondly, a local search with four search operators is presented based on the characteristics of the problem. Thirdly, a special crossover operator is designed for the DPFSP, and mutation and vaccination operators are also applied within the framework of the HIA to perform an immune search. The influence of parameter setting on the HIA is investigated based on the Taguchi method of design of experiment. Extensive numerical testing results based on 420 small-sized instances and 720 large-sized instances are provided. The effectiveness of the HIA is demonstrated by comparison with some existing heuristic algorithms and the variable neighbourhood descent methods. New best known solutions are obtained by the HIA for 17 out of 420 small-sized instances and 585 out of 720 large-sized instances.

On The Modeling of Educational Systems: II

ERIC Educational Resources Information Center

Grauer, Robert T.

1975-01-01

A unified approach to model building is developed from the separate techniques of regression, simulation, and factorial design. The methodology is applied in the context of a suburban school district. (Author/LS)

Knowledge, attitudes and beliefs about HIV infection and AIDS among healthy factory workers and their wives, Kinshasa, Zaire.

PubMed

Irwin, K; Bertrand, J; Mibandumba, N; Mbuyi, K; Muremeri, C; Mukoka, M; Munkolenkole, K; Nzilambi, N; Bosenge, N; Ryder, R

1991-01-01

As a first step in designing an AIDS prevention program at a large factory in Kinshasa, Zaire, we collected information on attitudes towards human immunodeficiency virus (HIV) infection and acquired immunodeficiency syndrome (AIDS) from factory foremen and their wives. Trained moderators conducted twelve focus group discussions (from November through December 1987) that addressed knowledge, attitudes and beliefs about HIV infection and AIDS. In general, participants were familiar with HIV infection and AIDS and considered these conditions leading health problems in Kinshasa. Although participants had a fairly accurate understanding of the causes of HIV infection, modes of transmission and preventive measures, many myths and misconceptions existed. Many participants did not believe that condom use would consistently prevent infection through sexual intercourse. Participants strongly favored the counseling of seropositive persons but showed less consensus about whether the spouse of a seropositive person should be notified of the partner's test result. Participants predicted that couples in which one member is seropositive and the other is not would experience marital discord and friction with family, neighbors and co-workers. These findings were applied to the development of a counseling and educational program for seropositive factory employees and their spouses.

Medical consequences of a factory closure: illness and disability in a four-year follow-up study.

PubMed

Westin, S; Norum, D; Schlesselman, J J

1988-03-01

The effect of a factory shut-down on sick leave and disability pensions was investigated in a four-year controlled follow-up study in a general practice setting. The study population consisted of 85 people, 72 women and 13 men, who lost their jobs when a sardine factory near Bergen in Norway was shut down in 1975. The employees of a nearby sister factory' within the same company were chosen as a control population, consisting of 87 people, 66 women and 21 men. The average amount of sick leave for the study group within the first year of follow-up showed a twofold increase compared to the controls. The rate of disability pensions, estimated by the life table method with appropriate adjustments, was more than three times higher in the study group than in the control group from the second through the fourth year of follow-up. The results of this investigation provide further evidence in support of a causal relationship between job loss and illness.

Factorial validity of the Problematic Facebook Use Scale for adolescents and young adults

PubMed Central

Marino, Claudia; Vieno, Alessio; Altoè, Gianmarco; Spada, Marcantonio M.

2017-01-01

Background and aims Recent research on problematic Facebook use has highlighted the need to develop a specific theory-driven measure to assess this potential behavioral addiction. The aim of the present study was to examine the factorial validity of the Problematic Facebook Use Scale (PFUS) adapted from Caplan’s Generalized Problematic Internet Scale model. Methods A total of 1,460 Italian adolescents and young adults (aged 14–29 years) participated in the study. Confirmatory factor analyses were performed in order to assess the factorial validity of the scale. Results Results revealed that the factor structure of the PFUS provided a good fit to the data. Furthermore, results of the multiple group analyses supported the invariance of the model across age and gender groups. Discussion and conclusions This study provides evidence supporting the factorial validity of the PFUS. This new scale provides a theory-driven tool to assess problematic use of Facebook among male and female adolescents and young adults. PMID:28198639

Factorial validity of the Problematic Facebook Use Scale for adolescents and young adults.

PubMed

Marino, Claudia; Vieno, Alessio; Altoè, Gianmarco; Spada, Marcantonio M

2017-03-01

Background and aims Recent research on problematic Facebook use has highlighted the need to develop a specific theory-driven measure to assess this potential behavioral addiction. The aim of the present study was to examine the factorial validity of the Problematic Facebook Use Scale (PFUS) adapted from Caplan's Generalized Problematic Internet Scale model. Methods A total of 1,460 Italian adolescents and young adults (aged 14-29 years) participated in the study. Confirmatory factor analyses were performed in order to assess the factorial validity of the scale. Results Results revealed that the factor structure of the PFUS provided a good fit to the data. Furthermore, results of the multiple group analyses supported the invariance of the model across age and gender groups. Discussion and conclusions This study provides evidence supporting the factorial validity of the PFUS. This new scale provides a theory-driven tool to assess problematic use of Facebook among male and female adolescents and young adults.

Analysis of DDT and its metabolites in soil and water samples obtained in the vicinity of a closed-down factory in Bangladesh using various extraction methods.

PubMed

Al Mahmud, M N U; Khalil, Farzana; Rahman, Md Musfiqur; Mamun, M I R; Shoeb, Mohammad; Abd El-Aty, A M; Park, Jong-Hyouk; Shin, Ho-Chul; Nahar, Nilufar; Shim, Jae-Han

2015-12-01

This study was conducted to monitor the spread of dichlorodiphenyltrichloroethane (DDT) and its metabolites (dichlorodiphenyldichloroethylene (DDE), dichlorodiphenyldichloroethane (DDD)) in soil and water to regions surrounding a closed DDT factory in Bangladesh. This fulfillment was accomplished using inter-method and inter-laboratory validation studies. DDTs (DDT and its metabolites) from soil samples were extracted using microwave-assisted extraction (MAE), supercritical fluid extraction (SFE), and solvent extraction (SE). Inter-laboratory calibration was assessed by SE, and all methods were validated by intra- and inter-day accuracy (expressed as recovery %) and precision (expressed as relative standard deviation (RSD)) in the same laboratory, at three fortified concentrations (n = 4). DDTs extracted from water samples by liquid-liquid partitioning and all samples were analyzed by gas chromatography (GC)-electron capture detector (ECD) and confirmed by GC/mass spectrometry (GC/MS). Linearities expressed as determination coefficients (R (2)) were ≥0.995 for matrix-matched calibrations. The recovery rate was in the range of 72-120 and 83-110%, with <15% RSD in soil and water, respectively. The limit of quantification (LOQ) was 0.0165 mg kg(-1) in soil and 0.132 μg L(-1) in water. Greater quantities of DDTs were extracted from soil using the MAE and SE techniques than with the SFE method. Higher amounts of DDTs were discovered in the southern (2.2-936 × 10(2) mg kg(-1)) or southwestern (86.3-2067 × 10(2) mg kg(-1)) direction from the factory than in the eastern direction (1.0-48.6 × 10(2) mg kg(-1)). An exception was the soil sample collected 50 ft (15.24 m) east (2904 × 10(2) mg kg(-1)) of the factory. The spread of DDTs in the water bodies (0.59-3.01 μg L(-1)) was approximately equal in all directions. We concluded that DDTs might have been dumped randomly around the warehouse after the closing of the factory.

What’s in a drop? Correlating observations and outcomes to guide macromolecular crystallization experiments

PubMed Central

Luft, Joseph R.; Wolfley, Jennifer R.; Snell, Edward H.

2011-01-01

Observations of crystallization experiments are classified as specific outcomes and integrated through a phase diagram to visualize solubility and thereby direct subsequent experiments. Specific examples are taken from our high-throughput crystallization laboratory which provided a broad scope of data from 20 million crystallization experiments on 12,500 different biological macromolecules. The methods and rationale are broadly and generally applicable in any crystallization laboratory. Through a combination of incomplete factorial sampling of crystallization cocktails, standard outcome classifications, visualization of outcomes as they relate chemically and application of a simple phase diagram approach we demonstrate how to logically design subsequent crystallization experiments. PMID:21643490

Investment appraisal using quantitative risk analysis.

PubMed

Johansson, Henrik

2002-07-01

Investment appraisal concerned with investments in fire safety systems is discussed. Particular attention is directed at evaluating, in terms of the Bayesian decision theory, the risk reduction that investment in a fire safety system involves. It is shown how the monetary value of the change from a building design without any specific fire protection system to one including such a system can be estimated by use of quantitative risk analysis, the results of which are expressed in terms of a Risk-adjusted net present value. This represents the intrinsic monetary value of investing in the fire safety system. The method suggested is exemplified by a case study performed in an Avesta Sheffield factory.

Iterative learning control with applications in energy generation, lasers and health care.

PubMed

Rogers, E; Tutty, O R

2016-09-01

Many physical systems make repeated executions of the same finite time duration task. One example is a robot in a factory or warehouse whose task is to collect an object in sequence from a location, transfer it over a finite duration, place it at a specified location or on a moving conveyor and then return for the next one and so on. Iterative learning control was especially developed for systems with this mode of operation and this paper gives an overview of this control design method using relatively recent relevant applications in wind turbines, free-electron lasers and health care, as exemplars to demonstrate its applicability.

Geostatistical noise filtering of geophysical images : application to unexploded ordnance (UXO) sites.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saito, Hirotaka; McKenna, Sean Andrew; Coburn, Timothy C.

2004-07-01

Geostatistical and non-geostatistical noise filtering methodologies, factorial kriging and a low-pass filter, and a region growing method are applied to analytic signal magnetometer images at two UXO contaminated sites to delineate UXO target areas. Overall delineation performance is improved by removing background noise. Factorial kriging slightly outperforms the low-pass filter but there is no distinct difference between them in terms of finding anomalies of interest.

An evaluation of the efficiency of cleaning methods in a bacon factory

PubMed Central

Dempster, J. F.

1971-01-01

The germicidal efficiencies of hot water (140-150° F.) under pressure (method 1), hot water + 2% (w/v) detergent solution (method 2) and hot water + detergent + 200 p.p.m. solution of available chlorine (method 3) were compared at six sites in a bacon factory. Results indicated that sites 1 and 2 (tiled walls) were satisfactorily cleaned by each method. It was therefore considered more economical to clean such surfaces routinely by method 1. However, this method was much less efficient (31% survival of micro-organisms) on site 3 (wooden surface) than methods 2 (7% survival) and 3 (1% survival). Likewise the remaining sites (dehairing machine, black scraper and table) were least efficiently cleaned by method 1. The most satisfactory results were obtained when these surfaces were treated by method 3. Pig carcasses were shown to be contaminated by an improperly cleaned black scraper. Repeated cleaning and sterilizing (method 3) of this equipment reduced the contamination on carcasses from about 70% to less than 10%. PMID:5291745

Rapid Prototyping of Microbial Cell Factories via Genome-scale Engineering

PubMed Central

Si, Tong; Xiao, Han; Zhao, Huimin

2014-01-01

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. PMID:25450192

Information security of Smart Factories

NASA Astrophysics Data System (ADS)

Iureva, R. A.; Andreev, Y. S.; Iuvshin, A. M.; Timko, A. S.

2018-05-01

In several years, technologies and systems based on the Internet of things (IoT) will be widely used in all smart factories. When processing a huge array of unstructured data, their filtration and adequate interpretation are a priority for enterprises. In this context, the correct representation of information in a user-friendly form acquires special importance, for which the market today presents advanced analytical platforms designed to collect, store and analyze data on technological processes and events in real time. The main idea of the paper is the statement of the information security problem in IoT and integrity of processed information.

A Psychometric Validation of the Internal and External Motivation to Respond without Prejudice toward People with Disabilities Scale

ERIC Educational Resources Information Center

Pruett, Steven R.; Deiches, Jon; Pfaller, Joseph; Moser, Erin; Chan, Fong

2014-01-01

Objective: To determine the factorial validity of the Internal and External Motivation to Respond without Prejudice toward People with Disabilities Scale (D-IMS/EMS). Design: A quantitative descriptive design using factor analysis. Participants: 233 rehabilitation counseling and rehabilitation services students. Results: Both exploratory and…

VISUAL AND AUDIO PRESENTATION IN MACHINE PROGRAMED INSTRUCTION. FINAL REPORT.

ERIC Educational Resources Information Center

ALLEN, WILLIAM H.

THIS STUDY WAS PART OF A LARGER RESEARCH PROGRAM AIMED TOWARD DEVELOPMENT OF PARADIGMS OF MESSAGE DESIGN. OBJECTIVES OF THREE PARALLEL EXPERIMENTS WERE TO EVALUATE INTERACTIONS OF PRESENTATION MODE, PROGRAM TYPE, AND CONTENT AS THEY AFFECT LEARNER CHARACTERISTICS. EACH EXPERIMENT USED 18 TREATMENTS IN A FACTORIAL DESIGN WITH RANDOMLY SELECTED…

An Empirical Study of Eight Nonparametric Tests in Hierarchical Regression.

ERIC Educational Resources Information Center

Harwell, Michael; Serlin, Ronald C.

When normality does not hold, nonparametric tests represent an important data-analytic alternative to parametric tests. However, the use of nonparametric tests in educational research has been limited by the absence of easily performed tests for complex experimental designs and analyses, such as factorial designs and multiple regression analyses,…

Staying Mobile

MedlinePlus

... representatives are factory-trained accessibility specialists in ramp design and installation and will provide a free evaluation and consultation to determine what ramp is best for your needs. Video Series Free From Falls Some MS symptoms and treatments ...

Engineering the smart factory

NASA Astrophysics Data System (ADS)

Harrison, Robert; Vera, Daniel; Ahmad, Bilal

2016-10-01

The fourth industrial revolution promises to create what has been called the smart factory. The vision is that within such modular structured smart factories, cyber-physical systems monitor physical processes, create a virtual copy of the physical world and make decentralised decisions. This paper provides a view of this initiative from an automation systems perspective. In this context it considers how future automation systems might be effectively configured and supported through their lifecycles and how integration, application modelling, visualisation and reuse of such systems might be best achieved. The paper briefly describes limitations in current engineering methods, and new emerging approaches including the cyber physical systems (CPS) engineering tools being developed by the automation systems group (ASG) at Warwick Manufacturing Group, University of Warwick, UK.

[Questionnaire to assess advertising campaigns impact about HIV/AIDS prevention].

PubMed

Bretón-López, Juana; Buela-Casal, Gualberto

2006-08-01

Present work is concerned with a questionnaire aimed to the impact evaluation of a selection of Spanish advertising campaigns about HIV/AIDS prevention. The work objective is to determine reliability and factorial structure of the instrument. It is described the designed questionnaire and its three scales (affective impact scale, cognitive impact scale and behavioural intention impact scale). The sample was composed by 405 high school teenagers to who were projected the advertising campaigns. So, teenagers filled the designed questionnaire. From a theoretical and psychometric point of view, data show the instrument is appropriate about internal consistency and factorial structure. The final goal of the questionnaire is to become useful tool to assess the persuasive effectiveness of the advertising campaigns within the HIV/AIDS network, as an intervention of primary prevention to reduce the expansion of epidemic.

Responsive copolymers for enhanced petroleum recovery. Quarterly technical progress report, June 23--September 21, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, C.; Hester, R.

Summaries are given on the technical progress on three tasks of this project. Monomer and polymer synthesis discusses the preparation of 1(7-aminoheptyloxymethyl)naphthalene and poly(maleic anhydride-alt-ethyl vinyl ether). Task 2, Characterization of molecular structure, discusses terpolymer solution preparation, UV analysis, fluorescence analysis, low angle laser light scattering, and viscometry. The paper discusses the effects of hydrophobic groups, the effect of pH, the effect of electrolyte addition, and photophysical studies. Task 3, Solution properties, describes the factorial experimental design for characterizing polymer solutions by light scattering, the light scattering test model, orthogonal factorial test design, linear regression in coded space, confidence levelmore » for coded space test mode coefficients, coefficients of the real space test model, and surface analysis of the model equations.« less

Statistical validation and an empirical model of hydrogen production enhancement found by utilizing passive flow disturbance in the steam-reformation process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, Paul A.; Liao, Chang-hsien

2007-11-15

A passive flow disturbance has been proven to enhance the conversion of fuel in a methanol-steam reformer. This study presents a statistical validation of the experiment based on a standard 2{sup k} factorial experiment design and the resulting empirical model of the enhanced hydrogen producing process. A factorial experiment design was used to statistically analyze the effects and interactions of various input factors in the experiment. Three input factors, including the number of flow disturbers, catalyst size, and reactant flow rate were investigated for their effects on the fuel conversion in the steam-reformation process. Based on the experimental results, anmore » empirical model was developed and further evaluated with an uncertainty analysis and interior point data. (author)« less

Optimization of minoxidil microemulsions using fractional factorial design approach.

PubMed

Jaipakdee, Napaphak; Limpongsa, Ekapol; Pongjanyakul, Thaned

2016-01-01

The objective of this study was to apply fractional factorial and multi-response optimization designs using desirability function approach for developing topical microemulsions. Minoxidil (MX) was used as a model drug. Limonene was used as an oil phase. Based on solubility, Tween 20 and caprylocaproyl polyoxyl-8 glycerides were selected as surfactants, propylene glycol and ethanol were selected as co-solvent in aqueous phase. Experiments were performed according to a two-level fractional factorial design to evaluate the effects of independent variables: Tween 20 concentration in surfactant system (X1), surfactant concentration (X2), ethanol concentration in co-solvent system (X3), limonene concentration (X4) on MX solubility (Y1), permeation flux (Y2), lag time (Y3), deposition (Y4) of MX microemulsions. It was found that Y1 increased with increasing X3 and decreasing X2, X4; whereas Y2 increased with decreasing X1, X2 and increasing X3. While Y3 was not affected by these variables, Y4 increased with decreasing X1, X2. Three regression equations were obtained and calculated for predicted values of responses Y1, Y2 and Y4. The predicted values matched experimental values reasonably well with high determination coefficient. By using optimal desirability function, optimized microemulsion demonstrating the highest MX solubility, permeation flux and skin deposition was confirmed as low level of X1, X2 and X4 but high level of X3.

Optimization and influence of parameter affecting the compressive strength of geopolymer concrete containing recycled concrete aggregate: using full factorial design approach

NASA Astrophysics Data System (ADS)

Krishnan, Thulasirajan; Purushothaman, Revathi

2017-07-01

There are several parameters that influence the properties of geopolymer concrete, which contains recycled concrete aggregate as the coarse aggregate. In the present study, the vital parameters affecting the compressive strength of geopolymer concrete containing recycled concrete aggregate are analyzedby varying four parameters with two levels using full factorial design in statistical software Minitab® 17. The objective of the present work is to gain an idea on the optimization, main parameter effects, their interactions and the predicted response of the model generated using factorial design. The parameters such as molarity of sodium hydroxide (8M and 12M), curing time (6hrs and 24 hrs), curing temperature (60°C and 90°C) and percentage of recycled concrete aggregate (0% and 100%) are considered. The results show that the curing time, molarity of sodium hydroxide and curing temperature were the orderly significant parameters and the percentage of Recycled concrete aggregate (RCA) was statistically insignificant in the production of geopolymer concrete. Thus, it may be noticeable that the RCA content had negligible effect on the compressive strength of geopolymer concrete. The expected responses from the generated model showed a satisfactory and rational agreement to the experimental data with the R2 value of 97.70%. Thus, geopolymer concrete comprising recycled concrete aggregate can solve the major social and environmental concerns such as the depletion of the naturally available aggregate sources and disposal of construction and demolition waste into the landfill.

Tuning Parameters in Heuristics by Using Design of Experiments Methods

NASA Technical Reports Server (NTRS)

Arin, Arif; Rabadi, Ghaith; Unal, Resit

2010-01-01

With the growing complexity of today's large scale problems, it has become more difficult to find optimal solutions by using exact mathematical methods. The need to find near-optimal solutions in an acceptable time frame requires heuristic approaches. In many cases, however, most heuristics have several parameters that need to be "tuned" before they can reach good results. The problem then turns into "finding best parameter setting" for the heuristics to solve the problems efficiently and timely. One-Factor-At-a-Time (OFAT) approach for parameter tuning neglects the interactions between parameters. Design of Experiments (DOE) tools can be instead employed to tune the parameters more effectively. In this paper, we seek the best parameter setting for a Genetic Algorithm (GA) to solve the single machine total weighted tardiness problem in which n jobs must be scheduled on a single machine without preemption, and the objective is to minimize the total weighted tardiness. Benchmark instances for the problem are available in the literature. To fine tune the GA parameters in the most efficient way, we compare multiple DOE models including 2-level (2k ) full factorial design, orthogonal array design, central composite design, D-optimal design and signal-to-noise (SIN) ratios. In each DOE method, a mathematical model is created using regression analysis, and solved to obtain the best parameter setting. After verification runs using the tuned parameter setting, the preliminary results for optimal solutions of multiple instances were found efficiently.

New approach to optimize near-infrared spectra with design of experiments and determination of milk compounds as influence factors for changing milk over time.

PubMed

De Benedictis, Lorenzo; Huck, Christian

2016-12-01

The optimization of near-infrared spectroscopic parameters was realized via design of experiments. With this new approach objectivity can be integrated into conventional, rather subjective approaches. The investigated factors are layer thickness, number of scans and temperature during measurement. Response variables in the full factorial design consisted of absorption intensity, signal-to-noise ratio and reproducibility of the spectra. Optimized factorial combinations have been found to be 0.5mm layer thickness, 64 scans and 25°C ambient temperature for liquid milk measurements. Qualitative analysis of milk indicated a strong correlation of environmental factors, as well as the feeding of cattle with respect to the change in milk composition. This was illustrated with the aid of near-infrared spectroscopy and the previously optimized parameters by detection of altered fatty acids in milk, especially by the fatty acid content (number of carboxylic functions) and the fatty acid length. Copyright © 2016 Elsevier Ltd. All rights reserved.

Factorial analysis of trihalomethanes formation in drinking water.

PubMed

Chowdhury, Shakhawat; Champagne, Pascale; McLellan, P James

2010-06-01

Disinfection of drinking water reduces pathogenic infection, but may pose risks to human health through the formation of disinfection byproducts. The effects of different factors on the formation of trihalomethanes were investigated using a statistically designed experimental program, and a predictive model for trihalomethanes formation was developed. Synthetic water samples with different factor levels were produced, and trihalomethanes concentrations were measured. A replicated fractional factorial design with center points was performed, and significant factors were identified through statistical analysis. A second-order trihalomethanes formation model was developed from 92 experiments, and the statistical adequacy was assessed through appropriate diagnostics. This model was validated using additional data from the Drinking Water Surveillance Program database and was applied to the Smiths Falls water supply system in Ontario, Canada. The model predictions were correlated strongly to the measured trihalomethanes, with correlations of 0.95 and 0.91, respectively. The resulting model can assist in analyzing risk-cost tradeoffs in the design and operation of water supply systems.

Quantifying second generation ethanol inhibition: Design of Experiments approach and kinetic model development.

PubMed

Schneiderman, Steven J; Johnson, Roger W; Menkhaus, Todd J; Gilcrease, Patrick C

2015-03-01

While softwoods represent a potential feedstock for second generation ethanol production, compounds present in their hydrolysates can inhibit fermentation. In this study, a novel Design of Experiments (DoE) approach was used to identify significant inhibitory effects on Saccharomyces cerevisiae D5A for the purpose of guiding kinetic model development. Although acetic acid, furfural and 5-hydroxymethyl furfural (HMF) were present at potentially inhibitory levels, initial factorial experiments only identified ethanol as a significant rate inhibitor. It was hypothesized that high ethanol levels masked the effects of other inhibitors, and a subsequent factorial design without ethanol found significant effects for all other compounds. When these non-ethanol effects were accounted for in the kinetic model, R¯(2) was significantly improved over an ethanol-inhibition only model (R¯(2)=0.80 vs. 0.76). In conclusion, when ethanol masking effects are removed, DoE is a valuable tool to identify significant non-ethanol inhibitors and guide kinetic model development. Copyright © 2014 Elsevier Ltd. All rights reserved.

Reedsport PB150 Deployment and Ocean Test Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Phil

2016-06-03

As the first utility scale wave power project in the US, the Wave Power Demonstration Project at Reedsport (OR) was planned to consist of 10 PowerBuoys (Phase II)1, located 2.5 miles off the coast. U.S. Department of Energy (DOE) funding under a prior DOE Grant (DE-FG36-08GO88017) along with funding from PNGC Power, an Oregon-based electric power cooperative, was utilized for the design completion, fabrication, assembly and factory testing of the first PowerBuoy for the Reedsport project. The design and fabrication of the first PowerBuoy and factory testing of the power take-off subsystem were completed, and the power take-off subsystem wasmore » successfully integrated into the spar at the fabricator’s facility in Oregon. The objectives of this follow-on grant were: advance PB150B design from TRL 5/6 to TRL 7/8; deploy a single PB150 and operate autonomously for 2 years; establish O&M costs; collect environmental information; and establish manufacturing methodologies.« less

Psychometric examination and factorial validity of the Exercise Dependence Scale-Revised in Italian exercisers.

PubMed

Costa, Sebastiano; Cuzzocrea, Francesca; Hausenblas, Heather A; Larcan, Rosalba; Oliva, Patrizia

2012-12-01

Background and aims The purpose of this study was to verify the factorial structure, internal validity, reliability, and criterion validity of the 21-item Exercise Dependence Scale-Revised (EDS-R) in an Italian sample. Methods Italian voluntary (N = 519) users of gyms who had a history of regular exercise for over a year completed the EDS-R and measures of exercise frequency. Results and conclusions Confirmatory factor analyses demonstrated a good fit to the hypothesized 7-factor model, and adequate internal consistency for the scale was evidenced. Criterion validity was evidenced by significant correlations among all the subscale of the EDS and exercise frequency. Finally, individuals at risk for exercise dependence reported more exercise behavior compared to the nondependent-symptomatic and nondependent-asymptomatic groups. These results suggest that the seven subscales of the Italian version of the EDS are measuring the construct of exercise dependence as defined by the DSM-IV criteria for substance dependence and also confirm previous research using the EDS-R in other languages. More research is needed to examine the psychometric properties of the EDS-R in diverse populations with various research designs.

Use of a moss biomonitoring method to compile emission inventories for small-scale industries.

PubMed

Varela, Z; Aboal, J R; Carballeira, A; Real, C; Fernández, J A

2014-06-30

We used a method of detecting small-scale pollution sources (DSSP) that involves measurement of the concentrations of elements in moss tissues, with the following aims: (i) to determine any common qualitative patterns of contaminant emissions for individual industrial sectors, (ii) to compare any such patterns with previously described patterns, and (iii) to compile an inventory of the metals and metalloids emitted by the industries considered. Cluster analysis revealed that there were no common patterns of emission associated with the industrial sectors, probably because of differences in production processes and in the types of fuel and raw materials. However, when these variables were shared by different factories, the concentrations of the elements in moss tissues enabled the factories to be grouped according to their emissions. We compiled a list of the metals and metalloids emitted by the factories under study and found that the DSSP method was satisfactory for this purpose in most cases (53 of 56). The method appears to be a useful tool for compiling contaminant inventories; it may also be useful for determining the efficacy of technical improvements aimed at reducing the industrial emission of contaminants and could be incorporated in environmental monitoring and control programmes. Copyright © 2014 Elsevier B.V. All rights reserved.

Process optimization for the preparation of oligomycin-loaded folate-conjugated chitosan nanoparticles as a tumor-targeted drug delivery system using a two-level factorial design method.

PubMed

Zu, Yuangang; Zhao, Qi; Zhao, Xiuhua; Zu, Shuchong; Meng, Li

2011-01-01

Oligomycin-A (Oli-A), an anticancer drug, was loaded to the folate (FA)-conjugated chitosan as a tumor-targeted drug delivery system for the purpose of overcoming the nonspecific targeting characteristics and the hydrophobicity of the compound. The two-level factorial design (2-LFD) was applied to modeling the preparation process, which was composed of five independent variables, namely FA-conjugated chitosan (FA-CS) concentration, Oli-A concentration, sodium tripolyphosphate (TPP) concentration, the mass ratio of FA-CS to TPP, and crosslinking time. The mean particle size (MPS) and the drug loading rate (DLR) of the resulting Oli-loaded FA-CS nanoparticles (FA-Oli-CSNPs) were used as response variables. The interactive effects of the five independent variables on the response variables were studied. The characteristics of the nanoparticles, such as amount of FA conjugation, drug entrapment rate (DER), DLR, surface morphology, and release kinetics properties in vitro were investigated. The FA-Oli-CSNPs with MPS of 182.6 nm, DER of 17.3%, DLR of 58.5%, and zeta potential (ZP) of 24.6 mV were obtained under optimum conditions. The amount of FA conjugation was 45.9 mg/g chitosan. The FA-Oli-CSNPs showed sustained-release characteristics for 576 hours in vitro. The results indicated that FA-Oli-CSNPs obtained as a targeted drug delivery system could be effective in the therapy of leukemia in the future.

Development and optimization of enteric coated mucoadhesive microspheres of duloxetine hydrochloride using 3(2) full factorial design.

PubMed

Setia, Anupama; Kansal, Sahil; Goyal, Naveen

2013-07-01

Microspheres constitute an important part of oral drug delivery system by virtue of their small size and efficient carrier capacity. However, the success of these microspheres is limited due to their short residence time at the site of absorption. The objective of the present study was to formulate and systematically evaluate in vitro performance of enteric coated mucoadhesive microspheres of duloxetine hydrochloride (DLX), an acid labile drug. DLX microspheres were prepared by simple emulsification phase separation technique using chitosan as carrier and glutaraldehyde as a cross-linking agent. Microspheres prepared were coated with eudragit L-100 using an oil-in-oil solvent evaporation method. Eudragit L-100was used as enteric coating polymer with the aim to release the drug in small intestine The microspheres prepared were characterized by particle size, entrapment efficiency, swelling index (SI), mucoadhesion time, in vitro drug release and surface morphology. A 3(2) full factorial design was employed to study the effect of independent variables polymer-to-drug ratio (X1) and stirring speed (X2) on dependent variables, particle size, entrapment efficiency, SI, in vitro mucoadhesion and drug release up to 24 h (t24). Microspheres formed were discrete, spherical and free flowing. The microspheres exhibited good mucoadhesive property and also showed high percentage entrapment efficiency. The microspheres were able to sustain the drug release up to 24 h. Thus, the prepared enteric coated mucoadhesive microspheres may prove to be a potential controlled release formulation of DLX for oral administration.

Factorial Design Based Multivariate Modeling and Optimization of Tunable Bioresponsive Arginine Grafted Poly(cystaminebis(acrylamide)-diaminohexane) Polymeric Matrix Based Nanocarriers.

PubMed

Yang, Rongbing; Nam, Kihoon; Kim, Sung Wan; Turkson, James; Zou, Ye; Zuo, Yi Y; Haware, Rahul V; Chougule, Mahavir B

2017-01-03

Desired characteristics of nanocarriers are crucial to explore its therapeutic potential. This investigation aimed to develop tunable bioresponsive newly synthesized unique arginine grafted poly(cystaminebis(acrylamide)-diaminohexane) [ABP] polymeric matrix based nanocarriers by using L9 Taguchi factorial design, desirability function, and multivariate method. The selected formulation and process parameters were ABP concentration, acetone concentration, the volume ratio of acetone to ABP solution, and drug concentration. The measured nanocarrier characteristics were particle size, polydispersity index, zeta potential, and percentage drug loading. Experimental validation of nanocarrier characteristics computed from initially developed predictive model showed nonsignificant differences (p > 0.05). The multivariate modeling based optimized cationic nanocarrier formulation of <100 nm loaded with hydrophilic acetaminophen was readapted for a hydrophobic etoposide loading without significant changes (p > 0.05) except for improved loading percentage. This is the first study focusing on ABP polymeric matrix based nanocarrier development. Nanocarrier particle size was stable in PBS 7.4 for 48 h. The increase of zeta potential at lower pH 6.4, compared to the physiological pH, showed possible endosomal escape capability. The glutathione triggered release at the physiological conditions indicated the competence of cytosolic targeting delivery of the loaded drug from bioresponsive nanocarriers. In conclusion, this unique systematic approach provides rational evaluation and prediction of a tunable bioresponsive ABP based matrix nanocarrier, which was built on selected limited number of smart experimentation.

Phytochemicals of Brassicaceae in plant protection and human health--influences of climate, environment and agronomic practice.

PubMed

Björkman, Maria; Klingen, Ingeborg; Birch, Andrew N E; Bones, Atle M; Bruce, Toby J A; Johansen, Tor J; Meadow, Richard; Mølmann, Jørgen; Seljåsen, Randi; Smart, Lesley E; Stewart, Derek

2011-05-01

In this review, we provide an overview of the role of glucosinolates and other phytochemical compounds present in the Brassicaceae in relation to plant protection and human health. Current knowledge of the factors that influence phytochemical content and profile in the Brassicaceae is also summarized and multi-factorial approaches are briefly discussed. Variation in agronomic conditions (plant species, cultivar, developmental stage, plant organ, plant competition, fertilization, pH), season, climatic factors, water availability, light (intensity, quality, duration) and CO(2) are known to significantly affect content and profile of phytochemicals. Phytochemicals such as the glucosinolates and leaf surface waxes play an important role in interactions with pests and pathogens. Factors that affect production of phytochemicals are important when designing plant protection strategies that exploit these compounds to minimize crop damage caused by plant pests and pathogens. Brassicaceous plants are consumed increasingly for possible health benefits, for example, glucosinolate-derived effects on degenerative diseases such as cancer, cardiovascular and neurodegenerative diseases. Thus, factors influencing phytochemical content and profile in the production of brassicaceous plants are worth considering both for plant and human health. Even though it is known that factors that influence phytochemical content and profile may interact, studies of plant compounds were, until recently, restricted by methods allowing only a reductionistic approach. It is now possible to design multi-factorial experiments that simulate their combined effects. This will provide important information to ecologists, plant breeders and agronomists. Copyright © 2011 Elsevier Ltd. All rights reserved.

Life cycle inventory for palm based plywood: A gate-to-gate case study

NASA Astrophysics Data System (ADS)

Ahmad, Shamim; Sahid, Ismail; Subramaniam, Vijaya; Muhamad, Halimah; Mokhtar, Anis

2013-11-01

The oil palm industry heavily relies on the world market. It is essential to ensure that the oil palm industry is ready to meet the demands and expectation of these overseas customers on the environmental performance of the oil palm industry. Malaysia produces 13.9 million tons of oil palm biomass including oil palm trunk (OPT), frond and empty fruits bunches (EFB) annually. OPT felled in some oil palm plantations during replanting is transported to various industries and one such industry is the plywood factories. In order to gauge the environmental performance of the use of OPT as plywood a Life Cycle Assessment (LCA) study was conducted for palm based plywood. LCA is an important tool to assess the environmental performance of a product or process. Life cycle inventory (LCI) is the heart of a LCA study. This LCI study has a gate-to-gate system boundary and the functional unit is 1 m3 palm plywood produced and covers three types of plywood; Moisture Resistance Plywood (MR), Weather Boiling Proof Plywood Grade 1 (WBP Grade 1) at Factory D and Weather Boiling Proof Plywood Grade 2 (WBP Grade 2) at Factory E. Both factories use two different types of drying processes; conventional drying at Factory D and kiln drying at Factory E. This inventory data was collected from two factories (D and E) representing 40% of Malaysia palm plywood industry. The inputs are mainly the raw materials which are the oil palm trunks and tropical wood veneers and the energy from diesel and electricity from grid which is mainly used for the drying process. The other inputs include water, urea formaldehyde, phenol formaldehyde, flour and melamine powder. The outputs are the biomass waste which consists of oil palm trunk off-cut and emission from boiler. Generally, all types of plywood production use almost same materials and processing methods in different quantities. Due to the different process efficiency, Factory D uses less input of raw materials and energy compared to Factory E.

Occupational hazards and safety measures amongst the paint factory workers in lagos, Nigeria.

PubMed

Awodele, Olufunsho; Popoola, Temidayo D; Ogbudu, Bawo S; Akinyede, Akin; Coker, Herbert A B; Akintonwa, Alade

2014-06-01

The manufacture of paint involves a variety of processes that present with medical hazards. Safety initiatives are hence introduced to limit hazard exposures and promote workplace safety. This aim of this study is to assess the use of available control measures/initiatives in selected paint factories in Lagos West Senatorial District, Nigeria. A total of 400 randomly selected paint factory workers were involved in the study. A well-structured World Health Organization standard questionnaire was designed and distributed to the workers to elicit information on awareness to occupational hazards, use of personal protective devices, and commonly experienced adverse symptoms. Urine samples were obtained from 50 workers randomly selected from these 400 participants, and the concentrations of the heavy metals (lead, cadmium, arsenic, and chromium) were determined using atomic absorption spectroscopy. The results show that 72.5% of the respondents are aware of the hazards associated with their jobs; 30% have had formal training on hazards and safety measures; 40% do not use personal protective devices, and 90% of the respondents reported symptoms relating to hazard exposure. There was a statistically significant (p < 0.05) increase in the mean heavy metal concentrations in the urine samples obtained from paint factory workers as compared with nonfactory workers. The need to develop effective frameworks that will initiate the integration and ensure implementation of safety regulations in paint factories is evident. Where these exist, there is a need to promote adherence to these practice guidelines.

A workplace intervention program and the increase in HIV knowledge, perceived accessibility and use of condoms among young factory workers in Thailand.

PubMed

Chamratrithirong, Aphichat; Ford, Kathleen; Punpuing, Sureeporn; Prasartkul, Pramote

2017-12-01

Vulnerability to Human Immunodeficiency Virus (HIV) infection among factory workers is a global problem. This study investigated the effectiveness of an intervention to increase AIDS knowledge, perceived accessibility to condoms and condom use among young factory workers in Thailand. The intervention was a workplace program designed to engage the private sector in HIV prevention. A cross-sectional survey conducted in 2008 to measure program outcomes in factories in Thailand was used in this study. The workplace intervention included the development of policies for management of HIV-positive employees, training sessions for managers and workers, and distribution of educational materials and condoms. A multi-level analysis was used to investigate the effect of HIV/AIDS prevention program components at the workplace on HIV/AIDS knowledge, perceived accessibility to condoms and condom use with regular sexual partners among 699 young factory workers (aged 18-24 years), controlling for their individual socio-demographic characteristics. Interventions related to the management and services component including workplace AIDS policy formulation, condom services programs and behavioral change campaigns were found to be significantly related to increased AIDS knowledge, perceived accessibility to condoms and condom use with regular partners. The effect of the HIV/AIDS training for managers, peer leaders and workers was positive but not statistically significant. With some revision of program components, scaling up of workplace interventions and the engagement of the private sector in HIV prevention should be seriously considered.

Study of the effect of temperature, irradiance and salinity on growth and yessotoxin production by the dinoflagellate Protoceratium reticulatum in culture by using a kinetic and factorial approach.

PubMed

Paz, Beatriz; Vázquez, José A; Riobó, Pilar; Franco, José M

2006-10-01

A complete first order orthogonal plan was used to optimize the growth and the production of yessotoxin (YTX) by the dinoflagellate Protoceratium reticulatum in culture by controlling salinity, temperature and irradiance. Initially, an approach to the kinetic data of cellular density and YTX production for each one of the experimental design conditions was performed. The P. reticulatum growth and YTX production were fitted to logistical equations and to a first-order kinetic model, respectively. The parameters obtained from this adjustment were used as dependent variables for the formulation of the empirical equations of the factorial design tested. The results showed that in practically all the cases for both, P. reticulatum growth and YTX production, irradiance is the primary independent variable and has a positive effect in the range 50-90 micromol photons m(-2) s(-1). Additionally, in certain specific cases, temperature reveals significant positive effects when maintained between 15 and 23 degrees C and salinity in the range of 20-34 displays negative effects. Despite the narrow ranges used in the work, results showed the suitability of factorial analysis to evaluate the optimal conditions for growth and yessotoxin production by the dinoflagellate P. reticulatum.

Optimum conditions for extracting collagen from the tunica albuginea of immunologically castrated pig testes and the functional properties of the isolated collagen.

PubMed

Simões, Gislaine Silveira; Silveira, Expedito Tadeu Facco; de Oliveira, Simone Raymundo; Poleze, Evandro; Allison, Jim R D; Ida, Elza Iouko; Shimokomaki, Massami

2014-04-01

This study evaluated alternative methods for extracting collagen from the tunica albuginea of pig testes and characterized the functional properties of the isolated collagen. Using the statistical tools of factorial design (2⁴⁻¹) and a central composite rotatable design (2³), it was concluded that the best conditions were 0.83 mol L⁻¹ acetic acid, 0.24% pepsin and 28 h of hydrolysis to isolate 82.54 g of collagen per 100g of sample. This purified collagen had improved functional properties in relation to bovine skin collagen, including water solubility, water-holding capacity, emulsifying capacity and emulsion stability. These results suggest that isolated collagen from the tunica albuginea can be used in pharmaceutical and food products. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effect of experimental design on the prediction performance of calibration models based on near-infrared spectroscopy for pharmaceutical applications.

PubMed

Bondi, Robert W; Igne, Benoît; Drennen, James K; Anderson, Carl A

2012-12-01

Near-infrared spectroscopy (NIRS) is a valuable tool in the pharmaceutical industry, presenting opportunities for online analyses to achieve real-time assessment of intermediates and finished dosage forms. The purpose of this work was to investigate the effect of experimental designs on prediction performance of quantitative models based on NIRS using a five-component formulation as a model system. The following experimental designs were evaluated: five-level, full factorial (5-L FF); three-level, full factorial (3-L FF); central composite; I-optimal; and D-optimal. The factors for all designs were acetaminophen content and the ratio of microcrystalline cellulose to lactose monohydrate. Other constituents included croscarmellose sodium and magnesium stearate (content remained constant). Partial least squares-based models were generated using data from individual experimental designs that related acetaminophen content to spectral data. The effect of each experimental design was evaluated by determining the statistical significance of the difference in bias and standard error of the prediction for that model's prediction performance. The calibration model derived from the I-optimal design had similar prediction performance as did the model derived from the 5-L FF design, despite containing 16 fewer design points. It also outperformed all other models estimated from designs with similar or fewer numbers of samples. This suggested that experimental-design selection for calibration-model development is critical, and optimum performance can be achieved with efficient experimental designs (i.e., optimal designs).

Interim Design Report for the International Design Study for a Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choubey, S.; Gandhi, R.; Goswami, S.

2011-10-01

The starting point for the International Design Study for the Neutrino Factory (the IDS-NF) was the output of the earlier International Scoping Study for a future Neutrino Factory and super-beam facility (the ISS). The accelerator facility described in section 2 incorporates the improvements that have been derived from the substantial amount of work carried out within the Accelerator Working Group. Highlights of these improvements include: (1) Initial concepts for the implementation of the proton driver at each of the three example sites, CERN, FNAL, and RAL; (2) Detailed studies of the energy deposition in the target area; (3) A reductionmore » in the length of the muon beam phase-rotation and bunching systems; (4) Detailed analyses of the impact of the risk that stray magnetic field in the accelerating cavities in the ionization cooling channel will reduce the maximum operating gradient. Several alternative ionization-cooling lattices have been developed as fallback options to mitigate this technical risk; (5) Studies of particle loss in the muon front-end and the development of strategies to mitigate the deleterious effects of such losses; (6) The development of more complete designs for the muon linac and re-circulating linacs; (7) The development of a design for the muon FFAG that incorporates insertions for injection and extraction; and (8) Detailed studies of diagnostics in the decay ring. Other sub-systems have undergone a more 'incremental' evolution; an indication that the design of the Neutrino Factory has achieved a degree of maturity. The design of the neutrino detectors described in section 3 has been optimized and the Detector Working Group has made substantial improvements to the simulation and analysis of the Magnetized Iron Neutrino Detector (MIND) resulting in an improvement in the overall neutrino-detection efficiency and a reduction in the neutrino-energy threshold. In addition, initial consideration of the engineering of the MIND has generated a design that is feasible and a finite element analysis of the toroidal magnetic field to produce a realistic field map has been carried out. Section 3 also contains, for the first time, a specification for the near-detector systems and a demonstration that the neutrino flux can be determined with a precision of 1% through measurements of inverse muon decay at the near detector. The performance of the facility, the work of the Physics and Performance Evaluation Group, is described in section 1. The effect of the improved MIND performance is to deliver a discovery reach for CP-invariance violation in the lepton sector, the determination of the mass hierarchy, and of {theta}{sub 13} that extends down to values of sin{sup 2} 2{theta}{sub 13} {approx} 5 x 10{sup -5} and is robust against systematic uncertainties. In addition, the improved neutrino-energy threshold has allowed an indicative analysis of the kind of re-optimization of the facility that could be carried out should {theta}{sub 13} be found close to the current upper bound. The results presented in section 1 demonstrate that the discovery reach as well as the precision with which the oscillation parameters can be measured at the baseline Neutrino Factory is superior to that of other proposed facilities for all possible values of sin{sup 2} 2{theta}{sub 13}.« less

An Analysis of the U.S. Navy Enlisted Separation Questionnaire

DTIC Science & Technology

1981-06-01

on the amount of variance which will give a satis- factory and acceptable solution, only a small number (less than n) of factors will be needed to...three factors rather than nine initi al categories of data classification. C. FACTOR ANALISIS OF SUBSETS OF THE DATA During this phase of the analysis...Harm.an, H. H. & Holzinger, K. J., Factnr Anali• , Synthesis of Factorial Methods, University of Chicago PFess, 1941. 27. Fruchter, B., Introduction to

The use of fatigue tests in the manufacture of automotive steel wheels.

NASA Astrophysics Data System (ADS)

Drozyner, P.; Rychlik, A.

2016-08-01

Production for the automotive industry must be particularly sensitive to the aspect of safety and reliability of manufactured components. One of such element is the rim, where durability is a feature which significantly affects the safety of transport. Customer complaints regarding this element are particularly painful for the manufacturer because it is almost always associated with the event of accident or near-accident. Authors propose original comprehensive method of quality control at selected stages of rims production: supply of materials, production and pre-shipment inspections. Tests by the proposed method are carried out on the originally designed inertial fatigue machine The machine allows bending fatigue tests in the frequency range of 0 to 50 Hz at controlled increments of vibration amplitude. The method has been positively verified in one of rims factory in Poland. Implementation resulted in an almost complete elimination of complaints resulting from manufacturing and material errors.

The share of southeastern black counties in the southern rural renaissance: were they bypassed by factory job gains, 1959-77?

PubMed

Till, T E

1986-04-01

Some authors have suggested that a leading problem associated with US factory employment for blacks may be that the nonfarm jobs--specifically manufacturing--have tended to go to heavily white counties rather than to the mainly black counties of the Deep South. This study is limited to the 1959-1977 period, the time of the most vigorous nonmetropolitan employment growth. To test the hypothesis that factory jobs have bypassed heavily black counties, a 100% sample of nonmetropolitan counties was used from 13 Southern states for the 2 time periods, 1959-1969 and 1969-1977. Results show that the minority counties were not bypassed by Southern rural factory job growth either in the 1960s or the 1970s, but their gains were not as sizeable as those of more heavily white counties. Both the neoclassical economics of discrimination--with its individualistic "taste for discrimination"--and the stinging critique by Marshall in 1974 that such analysis ignores the important role of institutionalized racism--can "explain the empirical conclusions of this article." Traditional "smokestack-chasing" methods are by no means hopeless. While co-ops and community development corporation strategies can be combined with traditional methods, it is important that foundations, government agencies, anti-poverty programs, and black leadership also focus on projects to competitively attract jobs in the traditional fashion.

Mobile Monitoring and Embedded Control System for Factory Environment

PubMed Central

Lian, Kuang-Yow; Hsiao, Sung-Jung; Sung, Wen-Tsai

2013-01-01

This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine) core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT) approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC) technology is used to carry out the actual electricity load experiments using smart phones. PMID:24351642

Mobile monitoring and embedded control system for factory environment.

PubMed

Lian, Kuang-Yow; Hsiao, Sung-Jung; Sung, Wen-Tsai

2013-12-17

This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine) core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT) approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC) technology is used to carry out the actual electricity load experiments using smart phones.

Implementing multifactorial psychotherapy research in online virtual environments (IMPROVE-2): study protocol for a phase III trial of the MOST randomized component selection method for internet cognitive-behavioural therapy for depression.

PubMed

Watkins, Edward; Newbold, Alexandra; Tester-Jones, Michelle; Javaid, Mahmood; Cadman, Jennifer; Collins, Linda M; Graham, John; Mostazir, Mohammod

2016-10-06

Depression is a global health challenge. Although there are effective psychological and pharmaceutical interventions, our best treatments achieve remission rates less than 1/3 and limited sustained recovery. Underpinning this efficacy gap is limited understanding of how complex psychological interventions for depression work. Recent reviews have argued that the active ingredients of therapy need to be identified so that therapy can be made briefer, more potent, and to improve scalability. This in turn requires the use of rigorous study designs that test the presence or absence of individual therapeutic elements, rather than standard comparative randomised controlled trials. One such approach is the Multiphase Optimization Strategy, which uses efficient experimentation such as factorial designs to identify active factors in complex interventions. This approach has been successfully applied to behavioural health but not yet to mental health interventions. A Phase III randomised, single-blind balanced fractional factorial trial, based in England and conducted on the internet, randomized at the level of the patient, will investigate the active ingredients of internet cognitive-behavioural therapy (CBT) for depression. Adults with depression (operationalized as PHQ-9 score ≥ 10), recruited directly from the internet and from an UK National Health Service Improving Access to Psychological Therapies service, will be randomized across seven experimental factors, each reflecting the presence versus absence of specific treatment components (activity scheduling, functional analysis, thought challenging, relaxation, concreteness training, absorption, self-compassion training) using a 32-condition balanced fractional factorial design (2 IV 7-2 ). The primary outcome is symptoms of depression (PHQ-9) at 12 weeks. Secondary outcomes include symptoms of anxiety and process measures related to hypothesized mechanisms. Better understanding of the active ingredients of efficacious therapies, such as CBT, is necessary in order to improve and further disseminate these interventions. This study is the first application of a component selection experiment to psychological interventions in depression and will enable us to determine the main effect of each treatment component and its relative efficacy, and cast light on underlying mechanisms, so that we can systematically enhance internet CBT. Current Controlled Trials ISRCTN24117387 . Registered 26 August 2014.

Development, validation and matrix effect of a QuEChERS method for the analysis of organochlorine pesticides in fish tissue.

PubMed

Stremel, Tatiana R De O; Domingues, Cinthia E; Zittel, Rosimara; Silva, Cleber P; Weinert, Patricia L; Monteiro, Franciele C; Campos, Sandro X

2018-04-03

This study aims to develop and validate a method to determine OCPs in fish tissues, minimizing the consumption of sample and reagents, by using a modified QuEChERS along with ultrasound, d-SPE and gas chromatography with an electron capture detector (GC-ECD), refraining the pooling. Different factorial designs were employed to optimize the sample preparation phase. The validation method presented a recovery of around 77.3% and 110.8%, with RSD lower than 13% and the detection limits were between 0.24 and 2.88 μgkg -1 , revealing good sensitiveness and accuracy. The method was satisfactorily applied to the analysis of tissues from different species of fish and OCPs residues were detected. The proposed method was shown effective to determine OCPs low concentrations in fish tissues, using small sample mass (0.5 g), making the sample analyses viable without the need for grouping (pool).

Development and Validation of an Extractive Spectrophotometric Method for Miconazole Nitrate Assay in Pharmaceutical Formulations.

PubMed

Eticha, Tadele; Kahsay, Getu; Hailu, Teklebrhan; Gebretsadikan, Tesfamichael; Asefa, Fitsum; Gebretsadik, Hailekiros; Thangabalan, Boovizhikannan

2018-01-01

A simple extractive spectrophotometric technique has been developed and validated for the determination of miconazole nitrate in pure and pharmaceutical formulations. The method is based on the formation of a chloroform-soluble ion-pair complex between the drug and bromocresol green (BCG) dye in an acidic medium. The complex showed absorption maxima at 422 nm, and the system obeys Beer's law in the concentration range of 1-30  µ g/mL with molar absorptivity of 2.285 × 10 4  L/mol/cm. The composition of the complex was studied by Job's method of continuous variation, and the results revealed that the mole ratio of drug : BCG is 1 : 1. Full factorial design was used to optimize the effect of variable factors, and the method was validated based on the ICH guidelines. The method was applied for the determination of miconazole nitrate in real samples.

Development and Validation of a Stability-Indicating HPLC Method for Imidapril and Its Degradation Products Using a Design of Experiment (DoE) Approach.

PubMed

Arumugam, Abiramasundari; Joshi, Amita; Vasu, Kamala K

2017-11-01

The present work focused on the application of design of experiment (DoE) principles to the development and optimization of a stability-indicating method (SIM) for the drug imidapril hydrochloride and its degradation products (DPs). The resolution of peaks for the DPs and their drug in a SIM can be influenced by many factors. The factors studied here were pH, gradient time, organic modifier, flow rate, molar concentration of the buffer, and wavelength, with the aid of a Plackett-Burman design. Results from the Plackett-Burman study conspicuously showed influence of two factors, pH and gradient time, on the analyzed response, particularly, the resolution of the closely eluting DPs (DP-5 and DP-6) and the retention time of the last peak. Optimization of the multiresponse processes was achieved through Derringer's desirability function with the assistance of a full factorial design. Separation was achieved using a C18 Phenomenex Luna column (250 × 4.6 mm id, 5 µm particle size) at a flow rate of 0.8 mL/min at 210 nm. The optimized mobile phase composition was ammonium-acetate buffer (pH 5) in pump A and acetonitrile-methanol (in equal ratio) in pump B with a run time of 40 min using a gradient method.

Yakima/Klickitat Fisheries Project Genetic Studies; Yakima/Klickitat Fisheries Project Monitoring and Evaluation Report 1 of 7, 2003-2004 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busack, Craig A.; Frye, Alice; Kassler, Todd

2004-05-01

Genetic work for 2003, as in previous years, was quite diverse. In chapter 1 we report on the use of DNA microsatellite markers to sex spring chinook collected at Roza. We have learned through comparison of sex determinations at Roza and then at CESRF that sexing green fish on the basis of morphology is somewhat inaccurate, and accurate sexing of fish at Roza is needed to estimate sex ratios of fish on the spawning grounds. Using DNA microsatellite markers, sexing accuracy was high, but not perfect. In chapter 2 we report on new genetic risk concepts currently being developed andmore » their implications for the YKFP spring chinook program. The impact on domestication of gene flow between the natural and hatchery spawning components is now much better understood. It is now possible to compare the risk of different hatchery programs much more quantitatively in the past. Thus, we can now make good predictions of how much less domesticating the Yakima spring chinook supplementation effort is than other programs. In chapter 3 we present the initial results of morphological comparisons of adult (1) hatchery-origin Upper Yakima spring chinook, (2) natural-origin U. Yakima spring chinook, and (3) Naches spring chinook. Canonical variate analysis allowed both sexes of the three groups to be classified correctly with over accuracy. The differences are subtle, but hatchery-origin fish appear to be someone thinner than natural-origin fish. This is consistent with observations of hatchery vs wild morphology in coho. In chapter 4 we describe the ongoing work to refine the Domestication Research/Monitoring Plan. Work for last year included analysis of the impact of HC line precocious males spawning in the wild, development of a misting incubation system for off-site incubation of Naches eggs, and refinement of some aspects of experimental design. The misting incubation system has broad applicability outside the project. The most recent version of the domestication monitoring plan is included as an appendix. In chapter 5 we present a final report on computer simulations of factorial mating designs. Using three different schemes for combining breeding values of fish, we found that full factorial mating offers a substantial increase in effective size over single-pair mating. Although full factorial mating may be too difficult logistically, but a significant proportion of the full factorial mating advantage can be obtained by using 2 x 2 partial factorials. We have developed a method that allows us to determine the relative effective size advantage of mixed partial factorial designs. In chapter 6 we report on an analysis of stock origin of smolts collected at Chandler. The 702 Chinook salmon smolts collected at the Chandler trap in 2003 were screened at 12 microsatellite DNA loci. A new Yakima basin baseline, consisting of spring chinook from the upper Yakima, Naches, and American River populations and fall chinook from the Marion Drain and lower Yakima populations, was created for these same 12 loci. DNA template problems with the tissue collections from the Naches, and American River populations prompted the omission of four loci prior to analysis. The results indicated: 80% Naches spring, 13% American River spring, 7% upper Yakima spring, and less than 1% for the two fall populations combined. The estimated stock proportions in the 2003 Chandler collection differed substantially from those for the 2002 collection. The temporal pattern of sampling in both Chandler smolt collections was not proportional to the observed outmigration in each year, suggesting that both of these estimates should be regarded with caution. Strengthening of the baseline data set will be a high priority for future work with Chandler smolts.« less

Design and analysis of mixed cropping experiments for indigenous Pacific Islands

Treesearch

Mareko P. Tofinga

1993-01-01

Mixed cropping (including agroforestry) often gives yield advan-tages as opposed to monocropping. Many criteria have been used to assess yield advantage in crop mixtures. Some of these are presented. In addition, the relative merits of replacement, additive and bivariate factorial designs are discussed. The concepts of analysis of mixed cropping are applied to an...

Effects of Computer Animation Instructional Package on Students' Achievement in Practical Biology

ERIC Educational Resources Information Center

Hamzat, Abdulrasaq; Bello, Ganiyu; Abimbola, Isaac Olakanmi

2017-01-01

This study examined the effects of computer animation instructional package on secondary school students' achievement in practical biology in Ilorin, Nigeria. The study adopted a pre-test, post-test, control group, non-randomised and nonequivalent quasi-experimental design, with a 2x2x3 factorial design. Two intact classes from two secondary…

The Respective Advantages and Disadvantages of Different Ways of Measuring the Instructional Sensitivity of Reading Comprehension Test Items.

ERIC Educational Resources Information Center

Perkins, Kyle

In this paper four classes of procedures for measuring the instructional sensitivity of reading comprehension test items are reviewed. True experimental designs are not recommended because some of the most important reading comprehension variables do not lend themselves to experimental manipulation. "Ex post facto" factorial designs are…

Effect of fescue toxicosis on ruminal kinetics, nitrogen and energy balance in Holstein steers

USDA-ARS?s Scientific Manuscript database

This study was designed to examine alteration of ruminal kinetics, as well as N and energy balance during fescue toxicosis. Six ruminally cannulated Holstein steers (BW=217 ±7 kg) were weight-matched into pairs and pair-fed throughout a cross-over design experiment with a 2x2 factorial treatment str...

Development and Validation of Teaching Practice Evaluation Instrument for Assessing Chemistry Students' Teaching Skills

ERIC Educational Resources Information Center

Ezeudu, F. O.; Chiaha, G. T. U.; Eze, J. U.

2013-01-01

The study was designed to develop and factorially validate an instrument for measuring teaching practice skills of chemistry student-teachers in University of Nigeria, Nsukka. Two research questions guided the study. The design of the study was instrumentation. All the chemistry student-teachers in the Department of Science Education, University…

Towards satisfying performance of an O/W cosmetic emulsion: screening of reformulation factors on textural and rheological properties using general experimental design.

PubMed

Filipovic, M; Lukic, M; Djordjevic, S; Krstonosic, V; Pantelic, I; Vuleta, G; Savic, S

2017-10-01

Consumers' demand for improved products' performance, alongside with the obligation of meeting the safety and efficacy goals, presents a key reason for the reformulation, as well as a challenging task for formulators. Any change of the formulation, whether it is wanted - in order to innovate the product (new actives and raw materials) or necessary - due to, for example legislative changes (restriction of ingredients), ingredients market unavailability, new manufacturing equipment, may have a number of consequences, desired or otherwise. The aim of the study was to evaluate the influence of multiple factors - variations of the composition, manufacturing conditions and their interactions, on emulsion textural and rheological characteristics, applying the general experimental factorial design and, subsequently, to establish the approach that could replace, to some extent, certain expensive and time-consuming tests (e.g. certain sensory analysis), often required, partly or completely, after the reformulation. An experimental design strategy was utilized to reveal the influence of reformulation factors (addition of new actives, preparation method change) on textural and rheological properties of cosmetic emulsions, especially those linked to certain sensorial attributes, and droplet size. The general experimental factorial design revealed a significant direct effect of each factor, as well as their interaction effects, on certain characteristics of the system and provided some valuable information necessary for fine-tuning reformulation conditions. Upon addition of STEM-liposomes, consistency, index of viscosity, firmness and cohesiveness were decreased, as along with certain rheology parameters (elastic and viscous modulus), whereas maximal and minimal apparent viscosities and droplet size were increased. The presence of an emollient (squalene) affected all the investigated parameters in a concentration-dependent manner. Modification of the preparation method (using Ultra Turrax instead of a propeller stirrer) produced emulsions with higher firmness and maximal apparent viscosity, but led to a decrease in minimal apparent viscosity, hysteresis loop area, all monitored parameters of oscillatory rheology and droplet size. The study showed that the established approach which combines a general experimental design and instrumental, rheological and textural measurements could be appropriate, more objective, repeatable and time and money-saving step towards developing cosmetic emulsions with satisfying, improved or unchanged, consumer-acceptable performance during the reformulation. © 2017 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Off-Line Quality Control In Integrated Circuit Fabrication Using Experimental Design

NASA Astrophysics Data System (ADS)

Phadke, M. S.; Kackar, R. N.; Speeney, D. V.; Grieco, M. J.

1987-04-01

Off-line quality control is a systematic method of optimizing production processes and product designs. It is widely used in Japan to produce high quality products at low cost. The method was introduced to us by Professor Genichi Taguchi who is a Deming-award winner and a former Director of the Japanese Academy of Quality. In this paper we will i) describe the off-line quality control method, and ii) document our efforts to optimize the process for forming contact windows in 3.5 Aim CMOS circuits fabricated in the Murray Hill Integrated Circuit Design Capability Laboratory. In the fabrication of integrated circuits it is critically important to produce contact windows of size very near the target dimension. Windows which are too small or too large lead to loss of yield. The off-line quality control method has improved both the process quality and productivity. The variance of the window size has been reduced by a factor of four. Also, processing time for window photolithography has been substantially reduced. The key steps of off-line quality control are: i) Identify important manipulatable process factors and their potential working levels. ii) Perform fractional factorial experiments on the process using orthogonal array designs. iii) Analyze the resulting data to determine the optimum operating levels of the factors. Both the process mean and the process variance are considered in this analysis. iv) Conduct an additional experiment to verify that the new factor levels indeed give an improvement.

The Effect of Visual Cueing and Control Design on Children's Reading Achievement of Audio E-Books with Tablet Computers

ERIC Educational Resources Information Center

Wang, Pei-Yu; Huang, Chung-Kai

2015-01-01

This study aims to explore the impact of learner grade, visual cueing, and control design on children's reading achievement of audio e-books with tablet computers. This research was a three-way factorial design where the first factor was learner grade (grade four and six), the second factor was e-book visual cueing (word-based, line-based, and…

Systems metabolic engineering design: Fatty acid production as an emerging case study

PubMed Central

Tee, Ting Wei; Chowdhury, Anupam; Maranas, Costas D; Shanks, Jacqueline V

2014-01-01

Increasing demand for petroleum has stimulated industry to develop sustainable production of chemicals and biofuels using microbial cell factories. Fatty acids of chain lengths from C6 to C16 are propitious intermediates for the catalytic synthesis of industrial chemicals and diesel-like biofuels. The abundance of genetic information available for Escherichia coli and specifically, fatty acid metabolism in E. coli, supports this bacterium as a promising host for engineering a biocatalyst for the microbial production of fatty acids. Recent successes rooted in different features of systems metabolic engineering in the strain design of high-yielding medium chain fatty acid producing E. coli strains provide an emerging case study of design methods for effective strain design. Classical metabolic engineering and synthetic biology approaches enabled different and distinct design paths towards a high-yielding strain. Here we highlight a rational strain design process in systems biology, an integrated computational and experimental approach for carboxylic acid production, as an alternative method. Additional challenges inherent in achieving an optimal strain for commercialization of medium chain-length fatty acids will likely require a collection of strategies from systems metabolic engineering. Not only will the continued advancement in systems metabolic engineering result in these highly productive strains more quickly, this knowledge will extend more rapidly the carboxylic acid platform to the microbial production of carboxylic acids with alternate chain-lengths and functionalities. PMID:24481660

Systems metabolic engineering design: fatty acid production as an emerging case study.

PubMed

Tee, Ting Wei; Chowdhury, Anupam; Maranas, Costas D; Shanks, Jacqueline V

2014-05-01

Increasing demand for petroleum has stimulated industry to develop sustainable production of chemicals and biofuels using microbial cell factories. Fatty acids of chain lengths from C6 to C16 are propitious intermediates for the catalytic synthesis of industrial chemicals and diesel-like biofuels. The abundance of genetic information available for Escherichia coli and specifically, fatty acid metabolism in E. coli, supports this bacterium as a promising host for engineering a biocatalyst for the microbial production of fatty acids. Recent successes rooted in different features of systems metabolic engineering in the strain design of high-yielding medium chain fatty acid producing E. coli strains provide an emerging case study of design methods for effective strain design. Classical metabolic engineering and synthetic biology approaches enabled different and distinct design paths towards a high-yielding strain. Here we highlight a rational strain design process in systems biology, an integrated computational and experimental approach for carboxylic acid production, as an alternative method. Additional challenges inherent in achieving an optimal strain for commercialization of medium chain-length fatty acids will likely require a collection of strategies from systems metabolic engineering. Not only will the continued advancement in systems metabolic engineering result in these highly productive strains more quickly, this knowledge will extend more rapidly the carboxylic acid platform to the microbial production of carboxylic acids with alternate chain-lengths and functionalities. © 2014 Wiley Periodicals, Inc.

Team table: a framework and tool for continuous factory planning

NASA Astrophysics Data System (ADS)

Sihn, Wilfried; Bischoff, Juergen; von Briel, Ralf; Josten, Marcus

2000-10-01

Growing market turbulences and shorter product life cycles require a continuous adaptation of factory structures resulting in a continuous factory planning process. Therefore a new framework is developed which focuses on configuration and data management process integration. This enable an online system performance evaluation based on continuous availability of current data. The use of this framework is especially helpful and will guarantee high cost and time savings, when used in the early stages of the planning, called the concept or rough planning phase. The new framework is supported by a planning round table as a tool for team-based configuration processes integrating the knowledge of all persons involved in planning processes. A case study conducted at a German company shows the advantages which can be achieved by implementing the new framework and methods.

Systems biology of yeast: enabling technology for development of cell factories for production of advanced biofuels.

PubMed

de Jong, Bouke; Siewers, Verena; Nielsen, Jens

2012-08-01

Transportation fuels will gradually shift from oil based fuels towards alternative fuel resources like biofuels. Current bioethanol and biodiesel can, however, not cover the increasing demand for biofuels and there is therefore a need for advanced biofuels with superior fuel properties. Novel cell factories will provide a production platform for advanced biofuels. However, deep cellular understanding is required for improvement of current biofuel cell factories. Fast screening and analysis (-omics) methods and metabolome-wide mathematical models are promising techniques. An integrated systems approach of these techniques drives diversity and quantity of several new biofuel compounds. This review will cover the recent technological developments that support improvement of the advanced biofuels 1-butanol, biodiesels and jetfuels. Copyright © 2011 Elsevier Ltd. All rights reserved.

Research on the Decision Method of Maintenance Materials Direct Supply

NASA Astrophysics Data System (ADS)

Zhu, Qian; Shi, Xiaopei; Liu, Shenyang; Luo, Guangxu; Zhu, Chen

2018-05-01

With the further development of civil military integration, more and more maintenance materials will be supplied by the factory directly. Aiming at the mode condition of maintenance materials factory direct supply, maintenance materials needs equipment support in the process of facing a number of direct supply manufacturers how to decision problems, using AHP, considering many factors optimization of direct supply manufacturers involved, and gives the weights of the evaluation indexes of the direct supply manufacturers to evaluate optimal. Finally, with 4 straights for the manufacturer as an example, considering the various evaluation indexes to carry out evaluation and drawing the correct evaluation of direct supply manufacturers, the best manufacturers direct supply is selected. An example shows that, AHP can provide scientific and theoretical basis to materials factory direct supply security.

The Influence of Education and Experience Upon Contextual and Task Performance in Warehouse Operations

DTIC Science & Technology

2016-09-01

leadership. Subjects were randomly assigned to one of four groups to conduct a mixed- design experiment; the design included a 2 x 2 factorial component...The experimental design should have resulted in baseline groups that were representative of the target population; therefore, one would expect...1983; Sheridan, 2015). “SRK provides a language in which to talk about types of behavior as a basis for system design . It provides a basis on which

A Slice of Orion

NASA Image and Video Library

2006-08-15

This image composite shows a part of the Orion constellation surveyed by NASA Spitzer Space Telescope. The shape of the main image was designed by astronomers to roughly follow the shape of Orion cloud A, an enormous star-making factory.

Automated array assembly

NASA Technical Reports Server (NTRS)

Daiello, R. V.

1977-01-01

A general technology assessment and manufacturing cost analysis was presented. A near-term (1982) factory design is described, and the results of an experimental production study for the large-scale production of flat-panel silicon and solar-cell arrays are detailed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogacz, Alex

We summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory and extendable to Higgs Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival for the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to an initially low RF frequency, e.g., 325 MHz, which is then increased to 650more » MHz as the transverse size shrinks with increasing energy. High-gradient normal conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. We consider an SRF-efficient design based on a multi-pass (4.5) ?dogbone? RLA, extendable to multi-pass FFAG-like arcs.« less

Cost effectiveness of ergonomic redesign of electronic motherboard.

PubMed

Sen, Rabindra Nath; Yeow, Paul H P

2003-09-01

A case study to illustrate the cost effectiveness of ergonomic redesign of electronic motherboard was presented. The factory was running at a loss due to the high costs of rejects and poor quality and productivity. Subjective assessments and direct observations were made on the factory. Investigation revealed that due to motherboard design errors, the machine had difficulty in placing integrated circuits onto the pads, the operators had much difficulty in manual soldering certain components and much unproductive manual cleaning (MC) was required. Consequently, there were high rejects and occupational health and safety (OHS) problems, such as, boredom and work discomfort. Also, much labour and machine costs were spent on repairs. The motherboard was redesigned to correct the design errors, to allow more components to be machine soldered and to reduce MC. This eliminated rejects, reduced repairs, saved US dollars 581495/year and improved operators' OHS. The customer also saved US dollars 142105/year on loss of business.

The Role of Synthetic Biology in the Design of Microbial Cell Factories for Biofuel Production

PubMed Central

Colin, Verónica Leticia; Rodríguez, Analía; Cristóbal, Héctor Antonio

2011-01-01

Insecurity in the supply of fossil fuels, volatile fuel prices, and major concerns regarding climate change have sparked renewed interest in the production of fuels from renewable resources. Because of this, the use of biodiesel has grown dramatically during the last few years and is expected to increase even further in the future. Biodiesel production through the use of microbial systems has marked a turning point in the field of biofuels since it is emerging as an attractive alternative to conventional technology. Recent progress in synthetic biology has accelerated the ability to analyze, construct, and/or redesign microbial metabolic pathways with unprecedented precision, in order to permit biofuel production that is amenable to industrial applications. The review presented here focuses specifically on the role of synthetic biology in the design of microbial cell factories for efficient production of biodiesel. PMID:22028591

Effect of treated tannery effluent with domestic wastewater and amendments on growth and yield of cotton.

PubMed

Jagathjothi, N; Amanullah, M Mohamed; Muthukrishnan, P

2013-11-15

Pot culture and field experiments were carried out at the Common Effluent Treatment Plant (CETP), Dindigul during kharif 2011-12 to investigate the influence of irrigation of treated tannery effluent along with domestic wastewater on growth, yield attributes and yield of cotton. The pot culture was in a factorial completely randomized design and field experiment laid out in factorial randomized block design with four replications. The results revealed that the mixing proportion of 25% Treated Tannery Effluent (TTE)+75% domestic wastewater (DWW) application recorded taller plants, higher dry matter production, number of sympodial branches plant(-1), number of fruiting points plant(-1), number of bolls plant(-1) and seed cotton yield with yield reduction of 15.28 and 16.11% compared to normal water irrigation under pot culture and field experiment, respectively. Regarding amendments, gypsum application registered higher seed cotton yield followed by VAM.

Methods for the design of vasomotor symptom trials: the menopausal strategies: finding lasting answers to symptoms and health network.

PubMed

Newton, Katherine M; Carpenter, Janet S; Guthrie, Katherine A; Anderson, Garnet L; Caan, Bette; Cohen, Lee S; Ensrud, Kristine E; Freeman, Ellen W; Joffe, Hadine; Sternfeld, Barbara; Reed, Susan D; Sherman, Sheryl; Sammel, Mary D; Kroenke, Kurt; Larson, Joseph C; Lacroix, Andrea Z

2014-01-01

This report describes the Menopausal Strategies: Finding Lasting Answers to Symptoms and Health network and methodological issues addressed in designing and implementing vasomotor symptom trials. Established in response to a National Institutes of Health request for applications, the network was charged with conducting rapid throughput randomized trials of novel and understudied available interventions postulated to alleviate vasomotor and other menopausal symptoms. Included are descriptions of and rationale for criteria used for interventions and study selection, common eligibility and exclusion criteria, common primary and secondary outcome measures, consideration of placebo response, establishment of a biorepository, trial duration, screening and recruitment, statistical methods, and quality control. All trial designs are presented, including the following: (1) a randomized, double-blind, placebo-controlled clinical trial designed to evaluate the effectiveness of the selective serotonin reuptake inhibitor escitalopram in reducing vasomotor symptom frequency and severity; (2) a two-by-three factorial design trial to test three different interventions (yoga, exercise, and ω-3 supplementation) for the improvement of vasomotor symptom frequency and bother; and (3) a three-arm comparative efficacy trial of the serotonin-norepinephrine reuptake inhibitor venlafaxine and low-dose oral estradiol versus placebo for reducing vasomotor symptom frequency. The network's structure and governance are also discussed. The methods used in and the lessons learned from the Menopausal Strategies: Finding Lasting Answers to Symptoms and Health trials are shared to encourage and support the conduct of similar trials and to encourage collaborations with other researchers.

Accelerator structure and beam transport system for the KEK photon factory injector

NASA Astrophysics Data System (ADS)

Sato, Isamu

1980-11-01

The injector is a 2.5 GeV electron linac which serves multiple purposes, being not only the injector for the various storage rings of the Photon Factory but also for the next planned project, the TRISTAN RING, and also as an intense electron or γ-ray source for research on phenomena in widely diverse scientific fields. The accelerator structure and beam transport system for the linac were designed with the greatest care in order to avoid beam blow-up difficulties, and also to be as suitable as possible to enable the economical mass production of the accelerator guides and focusing magnets.

Rapid prototyping of microbial cell factories via genome-scale engineering.

PubMed

Si, Tong; Xiao, Han; Zhao, Huimin

2015-11-15

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. Copyright © 2014 Elsevier Inc. All rights reserved.

Compact scanning transmission x-ray microscope at the photon factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeichi, Yasuo, E-mail: yasuo.takeichi@kek.jp; Inami, Nobuhito; Ono, Kanta

We report the design and performance of a compact scanning transmission X-ray microscope developed at the Photon Factory. Piezo-driven linear stages are used as coarse stages of the microscope to realize excellent compactness, mobility, and vibrational and thermal stability. An X-ray beam with an intensity of ∼10{sup 7} photons/s was focused to a diameter of ∼40 nm at the sample. At the soft X-ray undulator beamline used with the microscope, a wide range of photon energies (250–1600 eV) is available. The microscope has been used to research energy materials and in environmental sciences.

Solenoid Fringe Field Effects for the Neutrino Factory Linac - MAD-X Investigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. Aslaninejad,C. Bontoiu,J. Pasternak,J. Pozimski,Alex Bogacz

2010-05-01

International Design Study for the Neutrino Factory (IDS-NF) assumes the first stage of muon acceleration (up to 900 MeV) to be implemented with a solenoid based Linac. The Linac consists of three styles of cryo-modules, containing focusing solenoids and varying number of SRF cavities for acceleration. Fringe fields of the solenoids and the focusing effects in the SRF cavities have significant impact on the transverse beam dynamics. Using an analytical formula, the effects of fringe fields are studied in MAD-X. The resulting betatron functions are compared with the results of beam dynamics simulations using OptiM code.

Factors affecting the incidence of first-quality wheels of Trentingrana cheese.

PubMed

Bittante, G; Cecchinato, A; Cologna, N; Penasa, M; Tiezzi, F; De Marchi, M

2011-07-01

Trentingrana (or Grana Trentino) is a Protected Designation of Origin hard cheese produced in the eastern Italian Alps by small cooperative dairy factories. To obtain the certification of quality, wheels are evaluated at 9±1 mo of ripening and those classified as first quality are revaluated at 18±1 mo. Traditionally, the assessment is based on 2 sensory features: namely, the external aspect of the wheel and the internal texture; the latter is evaluated through the sound produced by beating the wheel with a special hammer. Traits considered in the study were the percentage of first-quality wheels of total wheels examined at 9±1 (QW(9 mo)) and 18±1 (QW(18 mo)) mo of ripening, and their combination [i.e., the percentage of first-quality wheels at 18±1 mo of ripening of the number of wheels evaluated at 9±1 mo (QW(tot))]. The experimental unit was the batch of 2 mo of production of each of 10 cooperative dairy factories from 2002 to 2008. Data were analyzed with a model that included fixed effects of dairy factory, year and season of production, and interactions between dairy factory and year, and dairy factory and season. The coefficients of determination of the models were 0.57, 0.68, and 0.67 for QW(9mo), QW(18 mo), and QW(tot), respectively. All factors significantly influenced the traits, with dairy factory being the most important source of variation, followed by season and year of production. Remarkable differences were found between the best and the worst dairy factory for QW(9 mo) (11.5%), QW(18 mo) (21.1%), and QW(tot) (25.6%). The first 4 yr of production had a negative effect on the percentage of wheels labeled as first quality and QW(tot) decreased from 74 to 64%; nevertheless, a complete recovery was detected in the following years. The season of production strongly influenced the studied traits with the best results in spring and summer, and the worst in autumn and winter. Compared with average, the 3 best dairy factories were smaller, with smaller associated farms, and showed lower variation across years and seasons of production. Results support the relevance of routinely assessing and monitoring the quality of Trentingrana cheese. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Fluid Lavage of Open Wounds (FLOW): A Multicenter, Blinded, Factorial Trial Comparing Alternative Irrigating Solutions and Pressures in Patients with Open Fractures

DTIC Science & Technology

2013-10-01

Multicenter, Blinded, Factorial Trial Comparing Alternative Irrigating Solutions and Pressures in Patients with Open Fractures PRINCIPAL...Solutions and Pressures in Patients with Open Fractures 5b. GRANT NUMBER W81XWH-12-1-0530 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Kyle J. Jeray...important initial step in preventing infection in open fractures . However, there is little clinical evidence as to the best irrigation methods and additives

Factor Structure, Factorial Invariance, and Validity of the Multidimensional Shame-Related Response Inventory-21 (MSRI-21)

PubMed Central

Garcia, Antonio F.; Acosta, Melina; Pirani, Saifa; Edwards, Daniel; Osman, Augustine

2017-01-01

We describe 2 studies designed to evaluate scores on the Multidimensional Shame-related Response Inventory-21 (MSRI-21), a recently developed instrument that measures affective and behavioral responses to shame. The inventory assesses shame-related responses in 3 categories: negative self-evaluation, fear of social consequences, and maladaptive behavior tendency. For Study 1, (N = 743) undergraduates completed the MSRI-21. Confirmatory factor analysis supported the validity of the MSRI-21 3-factor structure. Latent variable modeling of coefficient-α provided strong evidence for the internal consistency of scores on each scale. In Study 2, (N = 540) undergraduates completed the instrument along with 5 concurrent measures chosen for clinical significance. Achievement of factorial invariance supported the use of MSRI-21 scale scores to make valid mean comparisons across gender. In addition, MSRI-21 scale scores were associated as expected with scores on measures of self-harm, suicide, and other risk factors. Taken together, results of 2 studies support the internal consistency reliability, factorial validity, factorial invariance, and convergent validity of scores on the MSRI-21. Further work is needed to assess the temporal stability of the MSRI-21 scale scores, invariance across clinical status and other groupings, item-level measurement properties, and viability in highly symptomatic samples. PMID:28182490

Traditional food consumption behaviour and concern with environmental contaminants among Cree schoolchildren of the Mushkegowuk territory

PubMed Central

Hlimi, Tina; Skinner, Kelly; Hanning, Rhona M; Martin, Ian D.; Tsuji, Leonard J.S.

2012-01-01

Objectives To investigate factors influencing consumption of traditional foods (e.g. wild game, fish) and concerns about environmental contaminants among schoolchildren of the Mushkegowuk Territory First Nations (Moose Factory, Fort Albany, Kashechewan, Attawapiskat, and Peawanuck). Study design Cross-sectional data collection from a Web-based Eating Behaviour Questionnaire (WEB-Q). Methods Schoolchildren in grades 6–12 (n =262) responded to 4 of the WEB-Q questions: (a) Do you eat game? (b) How often do you eat game? (c) How concerned are you about the environmental contaminants in the wild game and fish that you eat? (d) I would eat more game if… [6 response options]. Data were collected in 2004 (Fort Albany), 2005 (Peawanuck), 2006 (Attawapiskat), 2007 (Moose Factory) and 2009 (Kashechewan). Hierarchical log-linear modelling (LLM) was used for analyses of multi-way frequency data. Results Of the schoolchildren answering the specific questions: 174 consumed game; 95 reported concerns about contaminants in game; and 84 would increase their game consumption if it were more available in their homes. LLM revealed significant differences between communities; schoolchildren in Moose Factory consumed game “rarely or never” at greater than expected frequency, and fewer than expected consumed game “at least once a day”. Schoolchildren in Kashechewan had greater frequency of daily game consumption and few were concerned about contaminants in game. Using LLM, we found that sex was an insignificant variable and did not affect game consumption frequency or environmental contaminant concern. Conclusion The consumption of traditional foods differed between communities and appears to be related to contamination concerns. In addition, latitudinal variation appears to influence the frequency of traditional food consumption in children; children in the most southerly location consumed traditional food less frequently. PMID:22456047

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adey, D.; Appleby, R. B.; Bayes, R.

Neutrino beams produced from the decay of muons in a racetrack-like decay ring (the so called Neutrino Factory) provide a powerful way to study neutrino oscillation physics and, in addition, provide unique beams for neutrino interaction studies. The Neutrinos from STORed Muons (nuSTORM) facility uses a neutrino factory-like design. Due to the particular nature of nuSTORM, it can also provide an intense, very pure, muon neutrino beam from pion decay. This so-called 'Neo-conventional' muon-neutrino beam from nuSTORM makes nuSTORM a hybrid neutrino factory. Here in this paper we describe the facility and give a detailed description of the neutrino beamsmore » that are available and the precision to which they can be characterized. We then show its potential for a neutrino interaction physics program and present sensitivity plots that indicate how well the facility can perform for short-baseline oscillation searches. Lastly, we comment on the performance potential of a 'Neo-conventional' muon neutrino beam optimized for long-baseline neutrino-oscillation physics.« less

Architecture and biogenesis of plus-strand RNA virus replication factories

PubMed Central

Paul, David; Bartenschlager, Ralf

2013-01-01

Plus-strand RNA virus replication occurs in tight association with cytoplasmic host cell membranes. Both, viral and cellular factors cooperatively generate distinct organelle-like structures, designated viral replication factories. This compartmentalization allows coordination of the different steps of the viral replication cycle, highly efficient genome replication and protection of the viral RNA from cellular defense mechanisms. Electron tomography studies conducted during the last couple of years revealed the three dimensional structure of numerous plus-strand RNA virus replication compartments and highlight morphological analogies between different virus families. Based on the morphology of virus-induced membrane rearrangements, we propose two separate subclasses: the invaginated vesicle/spherule type and the double membrane vesicle type. This review discusses common themes and distinct differences in the architecture of plus-strand RNA virus-induced membrane alterations and summarizes recent progress that has been made in understanding the complex interplay between viral and co-opted cellular factors in biogenesis and maintenance of plus-strand RNA virus replication factories. PMID:24175228

Influence of a three-phase separator configuration on the performance of an upflow anaerobic sludge bed reactor treating wastewater from a fruit-canning factory.

PubMed

Wongnoi, Rachbordin; Songkasiri, Warinthorn; Phalakornkule, Chantaraporn

2007-02-01

The objective of this study was to investigate the influence of a three-phase separator configuration on the performance of an upflow anaerobic sludge bed (USAB) treating wastewater from a fruit canning factory. The performances of two 30-L UASB reactors--one with a modified three-phase separator giving a spiral flow pattern and the other with a conventional configuration-were investigated in parallel. Wastewater, with a chemical oxygen demand (COD) concentration between 2000 and 7000 mg/L, was obtained from a fruit-canning factory. Based on the effluent data of the first 100 operation days, the UASB with the three-phase separator giving spiral flow patterns yielded up to 25% lower biomass washout. It also showed better efficiencies in treating wastewater--up to 60% lower effluent COD, up to 20% higher COD percent removal, and up to 29% higher biogas production. This work presents evidence of an improvement on the conventional physical design of a UASB.

Extraction and Determination of Trace Amounts of p-Coumaric Acid in Vinegar, Carrot Juice, and Seed Extract from Silybum marianum (L.) Gaertn.

PubMed

Khani, Rouhollah; Rostami, Zeinab; Bagherzade, Ghodsieh; Khojeh, Vahid

2018-03-01

In this study, for the monitoring and quantification of p-coumaric acid (p-CA) in vinegar, carrot juice, and seed extract from the plant species Silybum marianum (L.) Gaertn, an efficient and low-cost analytical method has been applied. For this purpose, a dispersive liquid-liquid microextraction (DLLME) method, followed by UV-Vis spectrophotometric detection, was used. To form a cloudy solution, a binary mixture containing ethanol as a disperser solvent and chloroform as an extraction solvent was rapidly injected by syringe into a sample solution containing p-CA. After centrifugation, dilution of the obtained organic phase was done with the proper amount of ethanol, and the phase was transferred into a micro cell for subsequent measurement. Some effective parameters for the DLLME method, such as the volume of disperser solvent and extraction solvent, pH, and salt concentration were inspected by a 24 full factorial central composite design using design Export Software. Under the optimized conditions, linearity was between 10 and 150 ng/mL, and the LOD was 2.3 ng/mL. The results of the proposed method were similar to the obtained results using a GC with flame-ionization detection method.

Design of experiments for amino acid extraction from tobacco leaves and their subsequent determination by capillary zone electrophoresis.

PubMed

Hodek, Ondřej; Křížek, Tomáš; Coufal, Pavel; Ryšlavá, Helena

2017-03-01

In this study, we optimized a method for the determination of free amino acids in Nicotiana tabacum leaves. Capillary electrophoresis with contactless conductivity detector was used for the separation of 20 proteinogenic amino acids in acidic background electrolyte. Subsequently, the conditions of extraction with HCl were optimized for the highest extraction yield of the amino acids because sample treatment of plant materials brings some specific challenges. Central composite face-centered design with fractional factorial design was used in order to evaluate the significance of selected factors (HCl volume, HCl concentration, sonication, shaking) on the extraction process. In addition, the composite design helped us to find the optimal values for each factor using the response surface method. The limits of detection and limits of quantification for the 20 proteinogenic amino acids were found to be in the order of 10 -5 and 10 -4  mol l -1 , respectively. Addition of acetonitrile to the sample was tested as a method commonly used to decrease limits of detection. Ambiguous results of this experiment pointed out some features of plant extract samples, which often required specific approaches. Suitability of the method for metabolomic studies was tested by analysis of a real sample, in which all amino acids, except for L-methionine and L-cysteine, were successfully detected. The optimized extraction process together with the capillary electrophoresis method can be used for the determination of proteinogenic amino acids in plant materials. The resulting inexpensive, simple, and robust method is well suited for various metabolomic studies in plants. As such, the method represents a valuable tool for research and practical application in the fields of biology, biochemistry, and agriculture.

[From manual workshop to international standard maker: exploration on production standard of acupuncture needle by Chengjiang acupuncture school].

PubMed

Cheng, Jie; Cao, Yang; Xia, Youbing

2015-02-01

ABSTRACT The exploration course on production standard of acupuncture needle by Chengjiang acupuncture school is reviewed in this paper. After new China was established, acupuncture needle standard was unified by Mr. CHENG Dan-an, which guided Suzhou Hua Erfang (predecessor of Suzhou Medical Supplies Factory) to make the quality standards and testing methods of acupuncture needle and improved the production process to make the modern acupuncture needle. Based on this, Suzhou Medical Supplies Factory followed the time development pace, ac tively introduced new technology, carried out technological innovation, and constantly improved the level of production technology, as a result, it gradually developed into one of the world's largest acupuncture needle production suppliers. Meanwhile, after establishing China's first national standard on acupuncture needle (GB 2024-1980), the Suzhou Medical Supplies Factory took the lead to draft "ISO) 17218:2014 the disposable use asepsis acupuncture needle", which was officially published as an international standard. The Suzhou Medical Supplies Factory developed from a manual workshop to an international standard maker.

Delivery of Brief Interventions for Heavy Drinking in Primary Care: Outcomes of the ODHIN 5-Country Cluster Randomized Trial

PubMed Central

Anderson, Peter; Coulton, Simon; Kaner, Eileen; Bendtsen, Preben; Kłoda, Karolina; Reynolds, Jillian; Segura, Lidia; Wojnar, Marcin; Mierzecki, Artur; Deluca, Paolo; Newbury-Birch, Dorothy; Parkinson, Kathryn; Okulicz-Kozaryn, Katarzyna; Drummond, Colin; Gual, Antoni

2017-01-01

PURPOSE We aimed to test whether 3 strategies—training and support, financial reimbursement, and an option to direct screen-positive patients to an Internet-based method of giving brief advice—have a longer-term effect on primary care clinicians’ delivery of screening and advice to heavy drinkers operationalized with the Alcohol Use Disorders Identification Test–Consumption (AUDIT-C) tool. METHODS We undertook a cluster randomized factorial trial with a 12-week implementation period in 120 primary health care units throughout Catalonia, England, Netherlands, Poland, and Sweden. Units were randomized to 8 groups: care as usual (control); training and support alone; financial reimbursement alone; electronic brief advice alone; paired combinations of these conditions; and all 3 combined. The primary outcome was the proportion of consulting adult patients (aged 18 years and older) receiving intervention—screening and, if screen-positive, advice—at 9 months. RESULTS Based on the factorial design, the ratio of the log of the proportion of patients given intervention at the 9-month follow-up was 1.39 (95% CI, 1.03–1.88) in units that received training and support as compared with units that did not. Neither financial reimbursement nor directing screen-positive patients to electronic brief advice led to a higher proportion of patients receiving intervention. CONCLUSIONS Training and support of primary health care units has a lasting, albeit small, impact on the proportion of adult patients given an alcohol intervention at 9 months. PMID:28694269

Cryogenic hydrogen fuel for controlled inertial confinement fusion (formation of reactor-scale cryogenic targets)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aleksandrova, I. V.; Koresheva, E. R., E-mail: elena.koresheva@gmail.com; Krokhin, O. N.

2016-12-15

In inertial fusion energy research, considerable attention has recently been focused on low-cost fabrication of a large number of targets by developing a specialized layering module of repeatable operation. The targets must be free-standing, or unmounted. Therefore, the development of a target factory for inertial confinement fusion (ICF) is based on methods that can ensure a cost-effective target production with high repeatability. Minimization of the amount of tritium (i.e., minimization of time and space at all production stages) is a necessary condition as well. Additionally, the cryogenic hydrogen fuel inside the targets must have a structure (ultrafine layers—the grain sizemore » should be scaled back to the nanometer range) that supports the fuel layer survivability under target injection and transport through the reactor chamber. To meet the above requirements, significant progress has been made at the Lebedev Physical Institute (LPI) in the technology developed on the basis of rapid fuel layering inside moving free-standing targets (FST), also referred to as the FST layering method. Owing to the research carried out at LPI, unique experience has been gained in the development of the FST-layering module for target fabrication with an ultrafine fuel layer, including a reactor- scale target design. This experience can be used for the development of the next-generation FST-layering module for construction of a prototype of a target factory for power laser facilities and inertial fusion power plants.« less

An approach to optimize sample preparation for MALDI imaging MS of FFPE sections using fractional factorial design of experiments.

PubMed

Oetjen, Janina; Lachmund, Delf; Palmer, Andrew; Alexandrov, Theodore; Becker, Michael; Boskamp, Tobias; Maass, Peter

2016-09-01

A standardized workflow for matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI imaging MS) is a prerequisite for the routine use of this promising technology in clinical applications. We present an approach to develop standard operating procedures for MALDI imaging MS sample preparation of formalin-fixed and paraffin-embedded (FFPE) tissue sections based on a novel quantitative measure of dataset quality. To cover many parts of the complex workflow and simultaneously test several parameters, experiments were planned according to a fractional factorial design of experiments (DoE). The effect of ten different experiment parameters was investigated in two distinct DoE sets, each consisting of eight experiments. FFPE rat brain sections were used as standard material because of low biological variance. The mean peak intensity and a recently proposed spatial complexity measure were calculated for a list of 26 predefined peptides obtained by in silico digestion of five different proteins and served as quality criteria. A five-way analysis of variance (ANOVA) was applied on the final scores to retrieve a ranking of experiment parameters with increasing impact on data variance. Graphical abstract MALDI imaging experiments were planned according to fractional factorial design of experiments for the parameters under study. Selected peptide images were evaluated by the chosen quality metric (structure and intensity for a given peak list), and the calculated values were used as an input for the ANOVA. The parameters with the highest impact on the quality were deduced and SOPs recommended.

Improvements in SMR Modular Construction through Supply Chain Optimization and Lessons Learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

White III, Chelsea C.; Petrovic, Bojan

Affordable energy is a critical societal need. Capital construction cost is a significant portion of nuclear energy cost. By controlling and reducing cost, companies can build more competitive nuclear power plants and hence provide access to more affordable energy. Modular construction provides an opportunity to reduce the cost of construction, and as projects scale up in number, the cost of each unit can be further reduced. The objective of this project was to advance design and construction methods for manufacturing Small Modular Reactors (SMRs), and in particular to improve modular construction techniques and develop best practices for designing and operatingmore » supply chains that take advantage of these techniques. The overarching objectives were to accelerate the construction schedule and reduce its variability, reduce the cost of construction, reduce interest costs accrued during construction (IDC), and thus enhance the economic attractiveness of SMRs. Our fundamental measure of merit was total capital investment cost (TCIC). To achieve these objectives, this project developed a decision support system, EVAL, to support identifying, addressing, and resolving or ameliorating challenges and deficiencies in the current modular construction approach. The results of this effort were consistent with the facts that the cost of a construction activity is often smallest when accomplished in the factory, greatest when accomplished at the construction site, and at an intermediate level when accomplished at an assembly area close to the construction site. Further, EVAL can aid in providing insight into ways to reduce waste, improve quality, efficiency, and throughput and reflects the fact that the more done early in the construction process, i.e., in the factory, the more upfront funding is required and hence the more IDC will be accrued. The analysis has lead to a better understanding of circumstances under which modular construction performed mainly in the factory will result in lower expected total cost, relative to more traditional, on-site construction procedures. Further, we anticipate that EVAL can be used to gain insight regarding what role standardization can play in order for modularization to be most effectively defined. Such results would ultimately benefit all (small and large) new nuclear construction.« less