Design, analysis and presentation of factorial randomised controlled trials

PubMed Central

Montgomery, Alan A; Peters, Tim J; Little, Paul

2003-01-01

Background The evaluation of more than one intervention in the same randomised controlled trial can be achieved using a parallel group design. However this requires increased sample size and can be inefficient, especially if there is also interest in considering combinations of the interventions. An alternative may be a factorial trial, where for two interventions participants are allocated to receive neither intervention, one or the other, or both. Factorial trials require special considerations, however, particularly at the design and analysis stages. Discussion Using a 2 × 2 factorial trial as an example, we present a number of issues that should be considered when planning a factorial trial. The main design issue is that of sample size. Factorial trials are most often powered to detect the main effects of interventions, since adequate power to detect plausible interactions requires greatly increased sample sizes. The main analytical issues relate to the investigation of main effects and the interaction between the interventions in appropriate regression models. Presentation of results should reflect the analytical strategy with an emphasis on the principal research questions. We also give an example of how baseline and follow-up data should be presented. Lastly, we discuss the implications of the design, analytical and presentational issues covered. Summary Difficulties in interpreting the results of factorial trials if an influential interaction is observed is the cost of the potential for efficient, simultaneous consideration of two or more interventions. Factorial trials can in principle be designed to have adequate power to detect realistic interactions, and in any case they are the only design that allows such effects to be investigated. PMID:14633287

The Shirts on Our Backs: Teleological Perspectives on Factory Safety in Bangladesh

ERIC Educational Resources Information Center

Dhooge, Lucien J.

2016-01-01

This case study addresses the issue of factory safety in the garment industry through an examination of two recent catastrophic failures in Bangladesh. The case study was designed for students in Business Ethics in the MBA curriculum at the Scheller College of Business at the Georgia Institute of Technology. The case study has also been adapted…

Experimental design methods for bioengineering applications.

PubMed

Keskin Gündoğdu, Tuğba; Deniz, İrem; Çalışkan, Gülizar; Şahin, Erdem Sefa; Azbar, Nuri

2016-01-01

Experimental design is a form of process analysis in which certain factors are selected to obtain the desired responses of interest. It may also be used for the determination of the effects of various independent factors on a dependent factor. The bioengineering discipline includes many different areas of scientific interest, and each study area is affected and governed by many different factors. Briefly analyzing the important factors and selecting an experimental design for optimization are very effective tools for the design of any bioprocess under question. This review summarizes experimental design methods that can be used to investigate various factors relating to bioengineering processes. The experimental methods generally used in bioengineering are as follows: full factorial design, fractional factorial design, Plackett-Burman design, Taguchi design, Box-Behnken design and central composite design. These design methods are briefly introduced, and then the application of these design methods to study different bioengineering processes is analyzed.

Performing Contrast Analysis in Factorial Designs: From NHST to Confidence Intervals and Beyond

PubMed Central

Wiens, Stefan; Nilsson, Mats E.

2016-01-01

Because of the continuing debates about statistics, many researchers may feel confused about how to analyze and interpret data. Current guidelines in psychology advocate the use of effect sizes and confidence intervals (CIs). However, researchers may be unsure about how to extract effect sizes from factorial designs. Contrast analysis is helpful because it can be used to test specific questions of central interest in studies with factorial designs. It weighs several means and combines them into one or two sets that can be tested with t tests. The effect size produced by a contrast analysis is simply the difference between means. The CI of the effect size informs directly about direction, hypothesis exclusion, and the relevance of the effects of interest. However, any interpretation in terms of precision or likelihood requires the use of likelihood intervals or credible intervals (Bayesian). These various intervals and even a Bayesian t test can be obtained easily with free software. This tutorial reviews these methods to guide researchers in answering the following questions: When I analyze mean differences in factorial designs, where can I find the effects of central interest, and what can I learn about their effect sizes? PMID:29805179

A method to accelerate creation of plasma etch recipes using physics and Bayesian statistics

NASA Astrophysics Data System (ADS)

Chopra, Meghali J.; Verma, Rahul; Lane, Austin; Willson, C. G.; Bonnecaze, Roger T.

2017-03-01

Next generation semiconductor technologies like high density memory storage require precise 2D and 3D nanopatterns. Plasma etching processes are essential to achieving the nanoscale precision required for these structures. Current plasma process development methods rely primarily on iterative trial and error or factorial design of experiment (DOE) to define the plasma process space. Here we evaluate the efficacy of the software tool Recipe Optimization for Deposition and Etching (RODEo) against standard industry methods at determining the process parameters of a high density O2 plasma system with three case studies. In the first case study, we demonstrate that RODEo is able to predict etch rates more accurately than a regression model based on a full factorial design while using 40% fewer experiments. In the second case study, we demonstrate that RODEo performs significantly better than a full factorial DOE at identifying optimal process conditions to maximize anisotropy. In the third case study we experimentally show how RODEo maximizes etch rates while using half the experiments of a full factorial DOE method. With enhanced process predictions and more accurate maps of the process space, RODEo reduces the number of experiments required to develop and optimize plasma processes.

Sample Size Requirements and Study Duration for Testing Main Effects and Interactions in Completely Randomized Factorial Designs When Time to Event is the Outcome

PubMed Central

Moser, Barry Kurt; Halabi, Susan

2013-01-01

In this paper we develop the methodology for designing clinical trials with any factorial arrangement when the primary outcome is time to event. We provide a matrix formulation for calculating the sample size and study duration necessary to test any effect with a pre-specified type I error rate and power. Assuming that a time to event follows an exponential distribution, we describe the relationships between the effect size, the power, and the sample size. We present examples for illustration purposes. We provide a simulation study to verify the numerical calculations of the expected number of events and the duration of the trial. The change in the power produced by a reduced number of observations or by accruing no patients to certain factorial combinations is also described. PMID:25530661

Rank-based permutation approaches for non-parametric factorial designs.

PubMed

Umlauft, Maria; Konietschke, Frank; Pauly, Markus

2017-11-01

Inference methods for null hypotheses formulated in terms of distribution functions in general non-parametric factorial designs are studied. The methods can be applied to continuous, ordinal or even ordered categorical data in a unified way, and are based only on ranks. In this set-up Wald-type statistics and ANOVA-type statistics are the current state of the art. The first method is asymptotically exact but a rather liberal statistical testing procedure for small to moderate sample size, while the latter is only an approximation which does not possess the correct asymptotic α level under the null. To bridge these gaps, a novel permutation approach is proposed which can be seen as a flexible generalization of the Kruskal-Wallis test to all kinds of factorial designs with independent observations. It is proven that the permutation principle is asymptotically correct while keeping its finite exactness property when data are exchangeable. The results of extensive simulation studies foster these theoretical findings. A real data set exemplifies its applicability. © 2017 The British Psychological Society.

The Game Factory: Using Cooperative Games to Promote Pro-Social Behaviour among Children

ERIC Educational Resources Information Center

Street, Helen; Hoppe, David; Kingsbury, David; Ma, Tony

2004-01-01

This study examines the use of a cooperative physical games program "The Game Factory" on social behaviour among children. Children are required to work together towards positive collective outcomes. A pretest-intervention-posttest design is used. Parents and teachers assessed 90 Australian primary school children in two experimental…

MapFactory - Towards a mapping design pattern for big geospatial data

NASA Astrophysics Data System (ADS)

Rautenbach, Victoria; Coetzee, Serena

2018-05-01

With big geospatial data emerging, cartographers and geographic information scientists have to find new ways of dealing with the volume, variety, velocity, and veracity (4Vs) of the data. This requires the development of tools that allow processing, filtering, analysing, and visualising of big data through multidisciplinary collaboration. In this paper, we present the MapFactory design pattern that will be used for the creation of different maps according to the (input) design specification for big geospatial data. The design specification is based on elements from ISO19115-1:2014 Geographic information - Metadata - Part 1: Fundamentals that would guide the design and development of the map or set of maps to be produced. The results of the exploratory research suggest that the MapFactory design pattern will help with software reuse and communication. The MapFactory design pattern will aid software developers to build the tools that are required to automate map making with big geospatial data. The resulting maps would assist cartographers and others to make sense of big geospatial data.

Procedure for developing experimental designs for accelerated tests for service-life prediction. [for solar cell modules

NASA Technical Reports Server (NTRS)

Thomas, R. E.; Gaines, G. B.

1978-01-01

Recommended design procedures to reduce the complete factorial design by retaining information on anticipated important interaction effects, and by generally giving up information on unconditional main effects are discussed. A hypothetical photovoltaic module used in the test design is presented. Judgments were made of the relative importance of various environmental stresses such as UV radiation, abrasion, chemical attack, temperature, mechanical stress, relative humidity and voltage. Consideration is given to a complete factorial design and its graphical representation, elimination of selected test conditions, examination and improvement of an engineering design, and parametric study. The resulting design consists of a mix of conditional main effects and conditional interactions and represents a compromise between engineering and statistical requirements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogomilov, M.; Matev, R.; Tsenov, R.

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable ofmore » making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.« less

Treatment of dyeing wastewater by TiO2/H2O2/UV process: experimental design approach for evaluating total organic carbon (TOC) removal efficiency.

PubMed

Lee, Seung-Mok; Kim, Young-Gyu; Cho, Il-Hyoung

2005-01-01

Optimal operating conditions in order to treat dyeing wastewater were investigated by using the factorial design and responses surface methodology (RSM). The experiment was statistically designed and carried out according to a 22 full factorial design with four factorial points, three center points, and four axial points. Then, the linear and nonlinear regression was applied on the data by using SAS package software. The independent variables were TiO2 dosage, H2O2 concentration and total organic carbon (TOC) removal efficiency of dyeing wastewater was dependent variable. From the factorial design and responses surface methodology (RSM), maximum removal efficiency (85%) of dyeing wastewater was obtained at TiO2 dosage (1.82 gL(-1)), H2O2 concentration (980 mgL(-1)) for oxidation reaction (20 min).

Multilevel Factorial Experiments for Developing Behavioral Interventions: Power, Sample Size, and Resource Considerations†

PubMed Central

Dziak, John J.; Nahum-Shani, Inbal; Collins, Linda M.

2012-01-01

Factorial experimental designs have many potential advantages for behavioral scientists. For example, such designs may be useful in building more potent interventions, by helping investigators to screen several candidate intervention components simultaneously and decide which are likely to offer greater benefit before evaluating the intervention as a whole. However, sample size and power considerations may challenge investigators attempting to apply such designs, especially when the population of interest is multilevel (e.g., when students are nested within schools, or employees within organizations). In this article we examine the feasibility of factorial experimental designs with multiple factors in a multilevel, clustered setting (i.e., of multilevel multifactor experiments). We conduct Monte Carlo simulations to demonstrate how design elements such as the number of clusters, the number of lower-level units, and the intraclass correlation affect power. Our results suggest that multilevel, multifactor experiments are feasible for factor-screening purposes, because of the economical properties of complete and fractional factorial experimental designs. We also discuss resources for sample size planning and power estimation for multilevel factorial experiments. These results are discussed from a resource management perspective, in which the goal is to choose a design that maximizes the scientific benefit using the resources available for an investigation. PMID:22309956

Multilevel factorial experiments for developing behavioral interventions: power, sample size, and resource considerations.

PubMed

Dziak, John J; Nahum-Shani, Inbal; Collins, Linda M

2012-06-01

Factorial experimental designs have many potential advantages for behavioral scientists. For example, such designs may be useful in building more potent interventions by helping investigators to screen several candidate intervention components simultaneously and to decide which are likely to offer greater benefit before evaluating the intervention as a whole. However, sample size and power considerations may challenge investigators attempting to apply such designs, especially when the population of interest is multilevel (e.g., when students are nested within schools, or when employees are nested within organizations). In this article, we examine the feasibility of factorial experimental designs with multiple factors in a multilevel, clustered setting (i.e., of multilevel, multifactor experiments). We conduct Monte Carlo simulations to demonstrate how design elements-such as the number of clusters, the number of lower-level units, and the intraclass correlation-affect power. Our results suggest that multilevel, multifactor experiments are feasible for factor-screening purposes because of the economical properties of complete and fractional factorial experimental designs. We also discuss resources for sample size planning and power estimation for multilevel factorial experiments. These results are discussed from a resource management perspective, in which the goal is to choose a design that maximizes the scientific benefit using the resources available for an investigation. (c) 2012 APA, all rights reserved

Tributes beyond Words: Art Educators' Use of Textiles to Memorialize the Triangle Shirtwaist Factory Fire

ERIC Educational Resources Information Center

Mercurio, Mia Lynn; Randall, Régine

2016-01-01

Through the study of The Triangle Shirtwaist Factory fire, pre-service art teachers learn the about interdisciplinary design and the importance of using discipline-specific literacy strategies alongside the materials and methods of their craft. The creativity and enthusiasm with which these preservice teachers approached the work convinced us that…

Factorial Design: An Eight Factor Experiment Using Paper Helicopters

NASA Technical Reports Server (NTRS)

Kozma, Michael

1996-01-01

The goal of this paper is to present the analysis of the multi-factor experiment (factorial design) conducted in EG490, Junior Design at Loyola College in Maryland. The discussion of this paper concludes the experimental analysis and ties the individual class papers together.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai

Similar to a super B-factory, a circular Higgs factory will require strong focusing systems near the interaction points and a low-emittance lattice in arcs to achieve a factory luminosity. At electron beam energy of 120 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at 2 percent level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of circular Higgs factory. In this paper, an example will be provided to illustrate the beam dynamics in circular Higgs factory,more » emphasizing on the chromatic optics. Basic optical modules and advanced analysis will be presented. Most important, we will show that 2% momentum aperture is achievable« less

The Operator Guide: An Ambient Persuasive Interface in the Factory

NASA Astrophysics Data System (ADS)

Meschtscherjakov, Alexander; Reitberger, Wolfgang; Pöhr, Florian; Tscheligi, Manfred

In this paper we introduce the context of a semiconductor factory as a promising area for the application of innovative interaction approaches. In order to increase efficiency ambient persuasive interfaces, which influence the operators' behaviour to perform in an optimized way, could constitute a potential strategy. We present insights gained from qualitative studies conducted in a specific semiconductor factory and provide a description of typical work processes and already deployed interfaces in this context. These findings informed the design of a prototype of an ambient persuasive interface within this realm - the "Operator Guide". Its overall aim is to improve work efficiency, while still maintaining a minimal error rate. We provide a detailed description of the Operator Guide along with an outlook of the next steps within a user-centered design approach.

The 9-item Bergen Burnout Inventory: factorial validity across organizations and measurements of longitudinal data.

PubMed

Feldt, Taru; Rantanen, Johanna; Hyvönen, Katriina; Mäkikangas, Anne; Huhtala, Mari; Pihlajasaari, Pia; Kinnunen, Ulla

2014-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times.

An algorithm for generating all possible 2(p-q) fractional factorial designs and its use in scientific experimentation

NASA Technical Reports Server (NTRS)

Sidik, S. M.

1973-01-01

An algorithm and computer program are presented for generating all the distinct 2(p-q) fractional factorial designs. Some applications of this algorithm to the construction of tables of designs and of designs for nonstandard situations and its use in Bayesian design are discussed. An appendix includes a discussion of an actual experiment whose design was facilitated by the algorithm.

Factorial design studies of antiretroviral drug-loaded stealth liposomal injectable: PEGylation, lyophilization and pharmacokinetic studies

NASA Astrophysics Data System (ADS)

Sudhakar, Beeravelli; Krishna, Mylangam Chaitanya; Murthy, Kolapalli Venkata Ramana

2016-01-01

The aim of the present study was to formulate and evaluate the ritonavir-loaded stealth liposomes by using 32 factorial design and intended to delivered by parenteral delivery. Liposomes were prepared by ethanol injection method using 32 factorial designs and characterized for various physicochemical parameters such as drug content, size, zeta potential, entrapment efficiency and in vitro drug release. The optimization process was carried out using desirability and overlay plots. The selected formulation was subjected to PEGylation using 10 % PEG-10000 solution. Stealth liposomes were characterized for the above-mentioned parameters along with surface morphology, Fourier transform infrared spectrophotometer, differential scanning calorimeter, stability and in vivo pharmacokinetic studies in rats. Stealth liposomes showed better result compared to conventional liposomes due to effect of PEG-10000. The in vivo studies revealed that stealth liposomes showed better residence time compared to conventional liposomes and pure drug solution. The conventional liposomes and pure drug showed dose-dependent pharmacokinetics, whereas stealth liposomes showed long circulation half-life compared to conventional liposomes and pure ritonavir solution. The results of statistical analysis showed significance difference as the p value is (<0.05) by one-way ANOVA. The result of the present study revealed that stealth liposomes are promising tool in antiretroviral therapy.

Development of uniform and predictable battery materials for nickel-cadmium aerospace cells

NASA Technical Reports Server (NTRS)

1971-01-01

Battery materials and manufacturing methods were analyzed with the aim of developing uniform and predictable battery plates for nickel cadmium aerospace cells. A study is presented for the high temperature electrochemical impregnation process for the preparation of nickel cadmium battery plates. This comparative study is set up as a factorially designed experiment to examine both manufacturing and operational variables and any interaction that might exist between them. The manufacturing variables in the factorial design include plaque preparative method, plaque porosity and thickness, impregnation method, and loading, The operational variables are type of duty cycle, charge and discharge rate, extent of overcharge, and depth of discharge.

Application of factorial designs to study factors involved in the determination of aldehydes present in beer by on-fiber derivatization in combination with gas chromatography and mass spectrometry.

PubMed

Carrillo, Génesis; Bravo, Adriana; Zufall, Carsten

2011-05-11

With the aim of studying the factors involved in on-fiber derivatization of Strecker aldehydes, furfural, and (E)-2-nonenal with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine in beer, factorial designs were applied. The effect of the temperature, time, and NaCl addition on the analytes' derivatization/extraction efficiency was studied through a factorial 2(3) randomized-block design; all of the factors and their interactions were significant at the 95% confidence level for most of the analytes. The effect of temperature and its interactions separated the analytes in two groups. However, a single sampling condition was selected that optimized response for most aldehydes. The resulting method, combining on-fiber derivatization with gas chromatography-mass spectrometry, was validated. Limits of detections were between 0.015 and 1.60 μg/L, and relative standard deviations were between 1.1 and 12.2%. The efficacy of the internal standardization method was confirmed by recovery percentage (73-117%). The method was applied to the determination of aldehydes in fresh beer and after storage at 28 °C.

A Sino-Finnish Initiative for Experimental Teaching Practices Using the Design Factory Pedagogical Platform

ERIC Educational Resources Information Center

Björklund, Tua A.; Nordström, Katrina M.; Clavert, Maria

2013-01-01

The paper presents a Sino-Finnish teaching initiative, including the design and experiences of a series of pedagogical workshops implemented at the Aalto-Tongji Design Factory (DF), Shanghai, China, and the experimentation plans collected from the 54 attending professors and teachers. The workshops aimed to encourage trying out interdisciplinary…

Optimization of antibacterial activity by Gold-Thread (Coptidis Rhizoma Franch) against Streptococcus mutans using evolutionary operation-factorial design technique.

PubMed

Choi, Ung-Kyu; Kim, Mi-Hyang; Lee, Nan-Hee

2007-11-01

This study was conducted to find the optimum extraction condition of Gold-Thread for antibacterial activity against Streptococcus mutans using The evolutionary operation-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature (R2 = -0.79) and in a longer extraction time (R2 = -0.71). Antibacterial activity was not affected by differentiation of the ethanol concentration in the extraction solvent (R2 = -0.12). The maximum antibacterial activity of clove against S. mutans determined by the EVOP-factorial technique was obtained at 80 degrees C extraction temperature, 26 h extraction time, and 50% ethanol concentration. The population of S. mutans decreased from 6.110 logCFU/ml in the initial set to 4.125 logCFU/ml in the third set.

Bioretention Systems: Partial Factorial Designs for Nitrate Removal

EPA Science Inventory

Changes in nutrient loadings are monitored by introducing captured stormwater runoff into eight outdoor rain gardens at EPA’s Urban Water Research Facility in Edison, New Jersey scaled for residential and urban landscapes. The partial factorial design includes non-vegetated meso...

The Japanese Positron Factory

NASA Astrophysics Data System (ADS)

Okada, S.; Sunaga, H.; Kaneko, H.; Takizawa, H.; Kawasuso, A.; Yotsumoto, K.; Tanaka, R.

1999-06-01

The Positron Factory has been planned at Japan Atomic Energy Research Institute (JAERI). The factory is expected to produce linac-based monoenergetic positron beams having world-highest intensities of more than 1010e+/sec, which will be applied for R&D of materials science, biotechnology and basic physics & chemistry. In this article, results of the design studies are demonstrated for the following essential components of the facilities: 1) Conceptual design of a high-power electron linac with 100 MeV in beam energy and 100 kW in averaged beam power, 2) Performance tests of the RF window in the high-power klystron and of the electron beam window, 3) Development of a self-driven rotating electron-to-positron converter and the performance tests, 4) Proposal of multi-channel beam generation system for monoenergetic positrons, with a series of moderator assemblies based on a newly developed Monte Carlo simulation and the demonstrative experiment, 5) Proposal of highly efficient moderator structures, 6) Conceptual design of a local shield to suppress the surrounding radiation and activation levels.

Midlands Teaching Factory, LTD.

ERIC Educational Resources Information Center

Midlands Technical Coll., Columbia, SC.

In 1987, Midlands Technical College (MTC), in Columbia, South Carolina, initiated a Computer Integrated Manufacturing (CIM) project, the Midlands Teaching Factory, LTD, which integrated various college departments with the goal of manufacturing a high quality, saleable product. The faculty developed a teaching factory model which was designed to…

Design Learning of Teaching Factory in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Putra, R. C.; Kusumah, I. H.; Komaro, M.; Rahayu, Y.; Asfiyanur, E. P.

2018-02-01

The industrial world that is the target of the process and learning outcomes of vocational high school (SMK) has its own character and nuance. Therefore, vocational education institutions in the learning process should be able to make the appropriate learning approach and in accordance with the industrial world. One approach to learning that is based on production and learning in the world of work is by industry-based learning or known as Teaching Factory, where in this model apply learning that involves direct students in goods or service activities are expected to have the quality so it is worth selling and accepted by consumers. The method used is descriptive approach. The purpose of this research is to get the design of the teaching factory based on the competency requirements of the graduates of the spouse industry, especially in the engineering department. The results of this study is expected to be one of the choice of model factory teaching in the field of machinery engineering in accordance with the products and competencies of the graduates that the industry needs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heaney, Mike

Statistically designed experiments can save researchers time and money by reducing the number of necessary experimental trials, while resulting in more conclusive experimental results. Surprisingly, many researchers are still not aware of this efficient and effective experimental methodology. As reported in a 2013 article from Chemical & Engineering News, there has been a resurgence of this methodology in recent years (http://cen.acs.org/articles/91/i13/Design-Experiments-Makes-Comeback.html?h=2027056365). This presentation will provide a brief introduction to statistically designed experiments. The main advantages will be reviewed along with the some basic concepts such as factorial and fractional factorial designs. The recommended sequential approach to experiments will be introducedmore » and finally a case study will be presented to demonstrate this methodology.« less

The Factorial Survey: Design Selection and its Impact on Reliability and Internal Validity

ERIC Educational Resources Information Center

Dülmer, Hermann

2016-01-01

The factorial survey is an experimental design consisting of varying situations (vignettes) that have to be judged by respondents. For more complex research questions, it quickly becomes impossible for an individual respondent to judge all vignettes. To overcome this problem, random designs are recommended most of the time, whereas quota designs…

ED-WAVE tool design approach: Case of a textile wastewater treatment plant in Blantyre, Malawi

NASA Astrophysics Data System (ADS)

Chipofya, V.; Kraslawski, A.; Avramenko, Y.

The ED-WAVE tool is a PC based package for imparting training on wastewater treatment technologies. The system consists of four modules viz. Reference Library, Process Builder, Case Study Manager, and Treatment Adviser. The principles of case-based design and case-based reasoning as applied in the ED-WAVE tool are utilised in this paper to evaluate the design approach of the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory, Blantyre, Malawi. The case being compared with MDW&S in the ED-WAVE tool is Textile Case 4 in Sri Lanka (2003). Equalisation, coagulation and rotating biological contactors is the sequencing of treatment units at Textile Case 4 in Sri Lanka. Screening, oxidation ditches and sedimentation is the sequencing of treatment units at MDW&S textile and garments factory. The study suggests that aerobic biological treatment is necessary in the treatment of wastewater from a textile and garments factory. MDW&S incorporates a sedimentation process which is necessary for the removal of settleable matter before the effluent is discharged to the municipal wastewater treatment plant. The study confirmed the practical use of the ED-WAVE tool in the design of wastewater treatment systems, where after encountering a new situation; already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects.

Nanostructured lipid carriers as a potential vehicle for Carvedilol delivery: Application of factorial design approach.

PubMed

Patil, Ganesh B; Patil, Nandkishor D; Deshmukh, Prashant K; Patil, Pravin O; Bari, Sanjay B

2016-01-01

Present invention relates to design of nanostructured lipid carriers (NLC) to augment oral bioavailability of Carvedilol (CAR). In this attempt, formulations of CAR-NLCs were prepared with glyceryl-monostearate (GMS) as a lipid, poloxamer 188 as a surfactant and tween 80 as a co-surfactant using high pressure homogenizer by 2(3) factorial design approach. Formed CAR-NLCs were assessed for various performance parameters. Accelerated stability studies demonstrated negligible change in particle size and entrapment efficiency, after storage at specified time up to 3 months. The promising findings in this investigation suggest the practicability of these systems for enhancement of bioavailability of drugs like CAR.

The 9-item Bergen Burnout Inventory: Factorial Validity Across Organizations and Measurements of Longitudinal Data

PubMed Central

Feldt, Taru; RANTANEN, Johanna; HYVÖNEN, Katriina; MÄKIKANGAS, Anne; HUHTALA, Mari; PIHLAJASAARI, Pia; KINNUNEN, Ulla

2013-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9)1). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times. PMID:24366535

Process parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning

NASA Astrophysics Data System (ADS)

Nonato, Renato C.; Morales, Ana R.; Rocha, Mateus C.; Nista, Silvia V. G.; Mei, Lucia H. I.; Bonse, Baltus C.

2017-01-01

Zinc oxide (ZnO) nanofibers were prepared by electrospinning under different conditions using a solution of poly(vinyl alcohol) and zinc acetate as precursor. A 23 factorial design was made to study the influence of the process parameters in the electrospinning (collector distance, flow rate and voltage), and a 22 factorial design was made to study the influence of the calcination process (time and temperature). SEM images were made to analyze the fiber morphology before and after calcination process, and the images were made to measure the nanofiber diameter. X-ray diffraction was made to analyze the total precursor conversion to ZnO and the elimination of the polymeric carrier.

Study of Montmorillonite Clay for the Removal of Copper (II) by Adsorption: Full Factorial Design Approach and Cascade Forward Neural Network

PubMed Central

Turan, Nurdan Gamze; Ozgonenel, Okan

2013-01-01

An intensive study has been made of the removal efficiency of Cu(II) from industrial leachate by biosorption of montmorillonite. A 24 factorial design and cascade forward neural network (CFNN) were used to display the significant levels of the analyzed factors on the removal efficiency. The obtained model based on 24 factorial design was statistically tested using the well-known methods. The statistical analysis proves that the main effects of analyzed parameters were significant by an obtained linear model within a 95% confidence interval. The proposed CFNN model requires less experimental data and minimum calculations. Moreover, it is found to be cost-effective due to inherent advantages of its network structure. Optimization of the levels of the analyzed factors was achieved by minimizing adsorbent dosage and contact time, which were costly, and maximizing Cu(II) removal efficiency. The suggested optimum conditions are initial pH at 6, adsorbent dosage at 10 mg/L, and contact time at 10 min using raw montmorillonite with the Cu(II) removal of 80.7%. At the optimum values, removal efficiency was increased to 88.91% if the modified montmorillonite was used. PMID:24453833

Optimization of LDL targeted nanostructured lipid carriers of 5-FU by a full factorial design.

PubMed

Andalib, Sare; Varshosaz, Jaleh; Hassanzadeh, Farshid; Sadeghi, Hojjat

2012-01-01

Nanostructured lipid carriers (NLC) are a mixture of solid and liquid lipids or oils as colloidal carrier systems that lead to an imperfect matrix structure with high ability for loading water soluble drugs. The aim of this study was to find the best proportion of liquid and solid lipids of different types for optimization of the production of LDL targeted NLCs used in carrying 5-Fu by the emulsification-solvent evaporation method. The influence of the lipid type, cholesterol or cholesteryl stearate for targeting LDL receptors, oil type (oleic acid or octanol), lipid and oil% on particle size, surface charge, drug loading efficiency, and drug released percent from the NLCs were studied by a full factorial design. The NLCs prepared by 54.5% cholesterol and 25% of oleic acid, showed optimum results with particle size of 105.8 nm, relatively high zeta potential of -25 mV, drug loading efficiency of 38% and release efficiency of about 40%. Scanning electron microscopy of nanoparticles confirmed the results of dynamic light scattering method used in measuring the particle size of NLCs. The optimization method by a full factorial statistical design is a useful optimization method for production of nanostructured lipid carriers.

An Analysis of Fixed Wing Tactical Airlifter Characteristics Using an Intra-Theater Airlift Computer Model

DTIC Science & Technology

1991-09-01

an Experimental Design ...... 31 Selection of Variables .................... ... 34 Defining Measures of Effectiveness ....... 37 Specification of...Required Number of Replications 44 Modification of Scenario Files ......... ... 46 Analysis of the Main Effects of a Two Level Factorial Design ...48 Analysis of the Interaction Effects of a *Two Level Factorial Design .. ............. ... 49 Yate’s Algorithm ......... ................ 50

A Classroom of Polymer Factories.

ERIC Educational Resources Information Center

Harris, Mary E.; Van Natta, Sandra

1998-01-01

Provides an activity in which students create small classroom factories and investigate several aspects of production including design, engineering, quality control, waste management, packaging, shipment, and communication. (DDR)

Engineering microbial cell factories for the production of plant natural products: from design principles to industrial-scale production.

PubMed

Liu, Xiaonan; Ding, Wentao; Jiang, Huifeng

2017-07-19

Plant natural products (PNPs) are widely used as pharmaceuticals, nutraceuticals, seasonings, pigments, etc., with a huge commercial value on the global market. However, most of these PNPs are still being extracted from plants. A resource-conserving and environment-friendly synthesis route for PNPs that utilizes microbial cell factories has attracted increasing attention since the 1940s. However, at the present only a handful of PNPs are being produced by microbial cell factories at an industrial scale, and there are still many challenges in their large-scale application. One of the challenges is that most biosynthetic pathways of PNPs are still unknown, which largely limits the number of candidate PNPs for heterologous microbial production. Another challenge is that the metabolic fluxes toward the target products in microbial hosts are often hindered by poor precursor supply, low catalytic activity of enzymes and obstructed product transport. Consequently, despite intensive studies on the metabolic engineering of microbial hosts, the fermentation costs of most heterologously produced PNPs are still too high for industrial-scale production. In this paper, we review several aspects of PNP production in microbial cell factories, including important design principles and recent progress in pathway mining and metabolic engineering. In addition, implemented cases of industrial-scale production of PNPs in microbial cell factories are also highlighted.

Integrating PCLIPS into ULowell's Lincoln Logs: Factory of the future

NASA Technical Reports Server (NTRS)

Mcgee, Brenda J.; Miller, Mark D.; Krolak, Patrick; Barr, Stanley J.

1990-01-01

We are attempting to show how independent but cooperating expert systems, executing within a parallel production system (PCLIPS), can operate and control a completely automated, fault tolerant prototype of a factory of the future (The Lincoln Logs Factory of the Future). The factory consists of a CAD system for designing the Lincoln Log Houses, two workcells, and a materials handling system. A workcell consists of two robots, part feeders, and a frame mounted vision system.

Asphaltic concrete overlays of rigid and flexible pavements : final report.

DOT National Transportation Integrated Search

1980-10-01

This study evaluated the effect of a given thickness of asphaltic concrete overlay in rehabilitating 53 test sections conforming to the experiment design. This factorial design specified various levels of traffic intensity and overlay thickness for b...

Tamarind seed gum-hydrolyzed polymethacrylamide-g-gellan beads for extended release of diclofenac sodium using 32 full factorial design.

PubMed

Nandi, Gouranga; Nandi, Amit Kumar; Khan, Najim Sarif; Pal, Souvik; Dey, Sibasish

2018-07-15

Development of tamarind seed gum (TSG)-hydrolyzed polymethacrylamide-g-gellan (h-Pmaa-g-GG) composite beads for extended release of diclofenac sodium using 3 2 full factorial design is the main purpose of this study. The ratio of h-Pmaa-g-GG and TSG and concentration of cross-linker CaCl 2 were taken as independent factors with three different levels of each. Effects of polymer ratio and CaCl 2 on drug entrapment efficiency (DEE), drug release, bead size and swelling were investigated. Responses such as DEE and different drug release parameters were statistically analyzed by 3 2 full factorial design using Design-Expert software and finally the formulation factors were optimized to obtain USP-reference release profile. Drug release rate was found to decrease with decrease in the ratio of h-Pmaa-g-GG:TSG and increase in the concentration of Ca 2+ ions in cross-linking medium. The optimized formulation showed DEE of 93.25% and an extended drug release profile over a period of 10h with f 2 =80.13. Kinetic modeling unveiled case-I-Fickian diffusion based drug release mechanism. Copyright © 2018 Elsevier B.V. All rights reserved.

The Use of Visual Advance Organizers for Learning Earth Science Concepts.

ERIC Educational Resources Information Center

Weisberg, Joseph S.

This study was designed to determine whether advance organizers in the form of visual aids might serve the same function as Ausubel's verbal advance organizers. The basic design of the study consisted of a 4 X 3 X 2 ANOVA factorial design. Ninety-six eighth-grade students were involved in the study. One group was exposed to a physiographic diagram…

Web-Based Smoking-Cessation Program

PubMed Central

Strecher, Victor J.; McClure, Jennifer B.; Alexander, Gwen L.; Chakraborty, Bibhas; Nair, Vijay N.; Konkel, Janine M.; Greene, Sarah M.; Collins, Linda M.; Carlier, Carola C.; Wiese, Cheryl J.; Little, Roderick J.; Pomerleau, Cynthia S.; Pomerleau, Ovide F.

2009-01-01

Background Initial trials of web-based smoking-cessation programs have generally been promising. The active components of these programs, however, are not well understood. This study aimed to (1) identify active psychosocial and communication components of a web-based smoking-cessation intervention and (2) examine the impact of increasing the tailoring depth on smoking cessation. Design Randomized fractional factorial design. Setting Two HMOs: Group Health in Washington State and Henry Ford Health System in Michigan. Participants 1866 smokers. Intervention A web-based smoking-cessation program plus nicotine patch. Five components of the intervention were randomized using a fractional factorial design: high- versus low-depth tailored success story, outcome expectation, and efficacy expectation messages; high- versus low-personalized source; and multiple versus single exposure to the intervention components. Measurements Primary outcome was 7 day point-prevalence abstinence at the 6-month follow-up. Findings Abstinence was most influenced by high-depth tailored success stories and a high-personalized message source. The cumulative assignment of the three tailoring depth factors also resulted in increasing the rates of 6-month cessation, demonstrating an effect of tailoring depth. Conclusions The study identified relevant components of smoking-cessation interventions that should be generalizable to other cessation interventions. The study also demonstrated the importance of higher-depth tailoring in smoking-cessation programs. Finally, the use of a novel fractional factorial design allowed efficient examination of the study aims. The rapidly changing interfaces, software, and capabilities of eHealth are likely to require such dynamic experimental approaches to intervention discovery. PMID:18407003

BPM Breakdown Potential in the PEP-II B-factory Storage Ring Collider

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weathersby, Stephen; Novokhatski, Alexander; /SLAC

2010-02-10

High current B-Factory BPM designs incorporate a button type electrode which introduces a small gap between the button and the beam chamber. For achievable currents and bunch lengths, simulations indicate that electric potentials can be induced in this gap which are comparable to the breakdown voltage. This study characterizes beam induced voltages in the existing PEP-II storage ring collider BPM as a function of bunch length and beam current.

The Positive Emotions after Acute Coronary Events behavioral health intervention: Design, rationale, and preliminary feasibility of a factorial design study.

PubMed

Huffman, Jeffery C; Albanese, Ariana M; Campbell, Kirsti A; Celano, Christopher M; Millstein, Rachel A; Mastromauro, Carol A; Healy, Brian C; Chung, Wei-Jean; Januzzi, James L; Collins, Linda M; Park, Elyse R

2017-04-01

Positive psychological constructs, such as optimism, are associated with greater participation in cardiac health behaviors and improved cardiac outcomes. Positive psychology interventions, which target psychological well-being, may represent a promising approach to improving health behaviors in high-risk cardiac patients. However, no study has assessed whether a positive psychology intervention can promote physical activity following an acute coronary syndrome. In this article we will describe the methods of a novel factorial design study to aid the development of a positive psychology-based intervention for acute coronary syndrome patients and aim to provide preliminary feasibility data on study implementation. The Positive Emotions after Acute Coronary Events III study is an optimization study (planned N = 128), subsumed within a larger multiphase optimization strategy iterative treatment development project. The goal of Positive Emotions after Acute Coronary Events III is to identify the ideal components of a positive psychology-based intervention to improve post-acute coronary syndrome physical activity. Using a 2 × 2 × 2 factorial design, Positive Emotions after Acute Coronary Events III aims to: (1) evaluate the relative merits of using positive psychology exercises alone or combined with motivational interviewing, (2) assess whether weekly or daily positive psychology exercise completion is optimal, and (3) determine the utility of booster sessions. The study's primary outcome measure is moderate-to-vigorous physical activity at 16 weeks, measured via accelerometer. Secondary outcome measures include psychological, functional, and adherence-related behavioral outcomes, along with metrics of feasibility and acceptability. For the primary study outcome, we will use a mixed-effects model with a random intercept (to account for repeated measures) to assess the main effects of each component (inclusion of motivational interviewing in the exercises, duration of the intervention, and inclusion of booster sessions) from a full factorial model controlling for baseline activity. Similar analyses will be performed on self-report measures and objectively-measured medication adherence over 16 weeks. We hypothesize that the combined positive psychology and motivational interviewing intervention, weekly exercises, and booster sessions will be associated with superior physical activity. Thus far, 78 participants have enrolled, with 72% of all possible exercises fully completed by participants. The Positive Emotions after Acute Coronary Events III study will help to determine the optimal content, intensity, and duration of a positive psychology intervention in post-acute coronary syndrome patients prior to testing in a randomized trial. This study is novel in its use of a factorial design within the multiphase optimization strategy framework to optimize a behavioral intervention and the use of a positive psychology intervention to promote physical activity in high-risk cardiac patients.

Design of experiment (DOE) study of biodegradable magnesium alloy synthesized by mechanical alloying using fractional factorial design

NASA Astrophysics Data System (ADS)

Salleh, Emee Marina; Ramakrishnan, Sivakumar; Hussain, Zuhailawati

2014-06-01

The biodegradable nature of magnesium (Mg) makes it a most highlighted and attractive to be used as implant materials. However, rapid corrosion rate of Mg alloys especially in electrolytic aqueous environment limits its performance. In this study, Mg alloy was mechanically milled by incorporating manganese (Mn) as alloying element. An attempt was made to study both effect of mechanical alloying and subsequent consolidation processes on the bulk properties of Mg-Mn alloys. 2k-2 factorial design was employed to determine the significant factors in producing Mg alloy which has properties closes to that of human bones. The design considered six factors (i.e. milling time, milling speed, weight percentage of Mn, compaction pressure, sintering temperature and sintering time). Density and hardness were chosen as the responses for assessing the most significant parameters that affected the bulk properties of Mg-Mn alloys. The experimental variables were evaluated using ANOVA and regression model. The main parameter investigated was compaction pressure.

A distribution-free multi-factorial profiler for harvesting information from high-density screenings.

PubMed

Besseris, George J

2013-01-01

Data screening is an indispensable phase in initiating the scientific discovery process. Fractional factorial designs offer quick and economical options for engineering highly-dense structured datasets. Maximum information content is harvested when a selected fractional factorial scheme is driven to saturation while data gathering is suppressed to no replication. A novel multi-factorial profiler is presented that allows screening of saturated-unreplicated designs by decomposing the examined response to its constituent contributions. Partial effects are sliced off systematically from the investigated response to form individual contrasts using simple robust measures. By isolating each time the disturbance attributed solely to a single controlling factor, the Wilcoxon-Mann-Whitney rank stochastics are employed to assign significance. We demonstrate that the proposed profiler possesses its own self-checking mechanism for detecting a potential influence due to fluctuations attributed to the remaining unexplainable error. Main benefits of the method are: 1) easy to grasp, 2) well-explained test-power properties, 3) distribution-free, 4) sparsity-free, 5) calibration-free, 6) simulation-free, 7) easy to implement, and 8) expanded usability to any type and size of multi-factorial screening designs. The method is elucidated with a benchmarked profiling effort for a water filtration process.

A Distribution-Free Multi-Factorial Profiler for Harvesting Information from High-Density Screenings

PubMed Central

Besseris, George J.

2013-01-01

Data screening is an indispensable phase in initiating the scientific discovery process. Fractional factorial designs offer quick and economical options for engineering highly-dense structured datasets. Maximum information content is harvested when a selected fractional factorial scheme is driven to saturation while data gathering is suppressed to no replication. A novel multi-factorial profiler is presented that allows screening of saturated-unreplicated designs by decomposing the examined response to its constituent contributions. Partial effects are sliced off systematically from the investigated response to form individual contrasts using simple robust measures. By isolating each time the disturbance attributed solely to a single controlling factor, the Wilcoxon-Mann-Whitney rank stochastics are employed to assign significance. We demonstrate that the proposed profiler possesses its own self-checking mechanism for detecting a potential influence due to fluctuations attributed to the remaining unexplainable error. Main benefits of the method are: 1) easy to grasp, 2) well-explained test-power properties, 3) distribution-free, 4) sparsity-free, 5) calibration-free, 6) simulation-free, 7) easy to implement, and 8) expanded usability to any type and size of multi-factorial screening designs. The method is elucidated with a benchmarked profiling effort for a water filtration process. PMID:24009744

Factorial experimental design intended for the optimization of the alumina purification conditions

NASA Astrophysics Data System (ADS)

Brahmi, Mounaouer; Ba, Mohamedou; Hidri, Yassine; Hassen, Abdennaceur

2018-04-01

The objective of this study was to determine the optimal conditions by using the experimental design methodology for the removal of some impurities associated with the alumina. So, three alumina qualities of different origins were investigated under the same conditions. The application of full-factorial designs on the samples of different qualities of alumina has followed the removal rates of the sodium oxide. However, a factorial experimental design was developed to describe the elimination of sodium oxide associated with the alumina. The experimental results showed that chemical analyze followed by XRF prior treatment of the samples, provided a primary idea concerning these prevailing impurities. Therefore, it appeared that the sodium oxide constituted the largest amount among all impurities. After the application of experimental design, analysis of the effectors different factors and their interactions showed that to have a better result, we should reduce the alumina quantity investigated and by against increase the stirring time for the first two samples, whereas, it was necessary to increase the alumina quantity in the case of the third sample. To expand and improve this research, we should take into account all existing impurities, since we found during this investigation that the levels of partial impurities increased after the treatment.

More Powerful Tests of Simple Interaction Contrasts in the Two-Way Factorial Design

ERIC Educational Resources Information Center

Hancock, Gregory R.; McNeish, Daniel M.

2017-01-01

For the two-way factorial design in analysis of variance, the current article explicates and compares three methods for controlling the Type I error rate for all possible simple interaction contrasts following a statistically significant interaction, including a proposed modification to the Bonferroni procedure that increases the power of…

Microbial Consortia Engineering for Cellular Factories: in vitro to in silico systems

PubMed Central

Bernstein, Hans C; Carlson, Ross P

2012-01-01

This mini-review discusses the current state of experimental and computational microbial consortia engineering with a focus on cellular factories. A discussion of promising ecological theories central to community resource usage is presented to facilitate interpretation of consortial designs. Recent case studies exemplifying different resource usage motifs and consortial assembly templates are presented. The review also highlights in silico approaches to design and to analyze consortia with an emphasis on stoichiometric modeling methods. The discipline of microbial consortia engineering possesses a widely accepted potential to generate highly novel and effective bio-catalysts for applications from biofuels to specialty chemicals to enhanced mineral recovery. PMID:24688677

Asphaltic concrete overlays of rigid and flexible pavements : interim report No. 1.

DOT National Transportation Integrated Search

1977-09-01

This study evaluated the effect of a given thickness of asphaltic concrete overlay in rehabilitating 53 test sections conforming to the experiment design. This factorial design specified various levels of traffic intensity and overlay thickness for b...

Novel Starch-PVA Polymer for Microparticle Preparation and Optimization Using Factorial Design Study

PubMed Central

Chattopadhyay, Helen; De, Amit Kumar; Datta, Sriparna

2015-01-01

The aim of our present work was to optimize the ratio of a very novel polymer, starch-polyvinyl alcohol (PVA), for controlled delivery of Ornidazole. Polymer-coated drug microparticles were prepared by emulsion method. Microscopic study, scanning electron microscopic study, and atomic force microscopic study revealed that the microparticles were within 10 micrometers of size with smooth spherical shape. The Fourier transform infrared spectroscopy showed absence of drug polymer interaction. A statistical 32 full factorial design was used to study the effect of different concentration of starch and PVA on the drug release profile. The three-dimensional plots gave us an idea about the contribution of each factor on the release kinetics. Hence this novel polymer of starch and polyvinyl alcohol can be utilized for control release of the drug from a targeted delivery device. PMID:27347511

Synchrotron radiation beamline to study radioactive materials at the Photon Factory

NASA Astrophysics Data System (ADS)

Konishi, Hiroyuki; Yokoya, Akinari; Shiwaku, Hideaki; Motohashi, Haruhiko; Makita, Tomoko; Kashihara, Yasuharu; Hashimoto, Shinya; Harami, Taikan; Sasaki, Teikichi A.; Maeta, Hiroshi; Ohno, Hideo; Maezawa, Hideki; Asaoka, Seiji; Kanaya, Noriichi; Ito, Kenji; Usami, Noriko; Kobayashi, Katsumi

1996-02-01

Design and construction of a new beamline have been described. The beamline is housed in a specially designed area controlled for radioactive materials at the Photon Factory (PF) in the National Laboratory for High Energy Physics (KEK). The beamline system consists of a front-end and two branchlines. One of the branchlines is used for X-ray photoelectron spectroscopy and radiation biology in the energy range of 1.8-6 keV and the other for X-ray diffractometry and XAFS studies as well as radiation biology in the range of 4-20 keV. The former was particularly equipped for the protection against accidental scattering of radioactive materials both inside and outside of the vacuum system.

The Skateboard Factory: Curriculum by Design--Oasis Skateboard Factory Q&A with Craig Morrison

ERIC Educational Resources Information Center

Pearson, George

2012-01-01

Since its opening three years ago, Oasis Skateboard Factory (OSF), founded by teacher Craig Morrison, has attracted considerable media exposure and received a Ken Spencer Award from the CEA for its innovative program. OSF is one of three programs offered by Oasis Alternative Secondary School, one of 22 alternative secondary schools of the Toronto…

Clustering Words to Match Conditions: An Algorithm for Stimuli Selection in Factorial Designs

ERIC Educational Resources Information Center

Guasch, Marc; Haro, Juan; Boada, Roger

2017-01-01

With the increasing refinement of language processing models and the new discoveries about which variables can modulate these processes, stimuli selection for experiments with a factorial design is becoming a tough task. Selecting sets of words that differ in one variable, while matching these same words into dozens of other confounding variables…

Performing Contrast Analysis in Factorial Designs: From NHST to Confidence Intervals and Beyond

ERIC Educational Resources Information Center

Wiens, Stefan; Nilsson, Mats E.

2017-01-01

Because of the continuing debates about statistics, many researchers may feel confused about how to analyze and interpret data. Current guidelines in psychology advocate the use of effect sizes and confidence intervals (CIs). However, researchers may be unsure about how to extract effect sizes from factorial designs. Contrast analysis is helpful…

A factorial design experiment as a pilot study for noninvasive genetic sampling.

PubMed

Renan, Sharon; Speyer, Edith; Shahar, Naama; Gueta, Tomer; Templeton, Alan R; Bar-David, Shirli

2012-11-01

Noninvasive genetic sampling has increasingly been used in ecological and conservation studies during the last decade. A major part of the noninvasive genetic literature is dedicated to the search for optimal protocols, by comparing different methods of collection, preservation and extraction of DNA from noninvasive materials. However, the lack of quantitative comparisons among these studies and the possibility that different methods are optimal for different systems make it difficult to decide which protocol to use. Moreover, most studies that have compared different methods focused on a single factor - collection, preservation or extraction - while there could be interactions between these factors. We designed a factorial experiment, as a pilot study, aimed at exploring the effect of several collection, preservation and extraction methods, and the interactions between them, on the quality and amplification success of DNA obtained from Asiatic wild ass (Equus hemionus) faeces in Israel. The amplification success rates of one mitochondrial DNA and four microsatellite markers differed substantially as a function of collection, preservation and extraction methods and their interactions. The most efficient combination for our system integrated the use of swabs as a collection method with preservation at -20 °C and with the Qiagen DNA Stool Kit with modifications as the DNA extraction method. The significant interaction found between the collection, preservation methods and the extraction methods reinforces the importance of conducting a factorial design experiment, rather than examining each factor separately, as a pilot study before initiating a full-scale noninvasive research project. © 2012 Blackwell Publishing Ltd.

78 FR 65326 - Agency Information Collection Activities; Proposed Collection; Comment Request; Experimental...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... Directed at Adolescents.'' This study is designed to examine how adolescents interpret DTC advertising... understanding of benefits and risks in DTC ads differ across this part of the lifespan. Design Overview Within... (benefit onset: immediate, delayed) x 2 (risk severity: high, low) factorial design, based on the rationale...

Sensory imbalance as mechanism of orientation disruption in the leafminer, Phyllocnistis citrella: Elucidation by multivariate geometric designs and response surface models

USDA-ARS?s Scientific Manuscript database

Experimental designs developed to address mixtures are ideally suited for many areas of experimental biology including pheromone blend studies because they address the confounding of proportionality and concentration intrinsic to factorial and one-factor-at-a-time designs. Geometric multivariate des...

Development and Validation of Teaching Practice Evaluation Instrument for Assessing Chemistry Students' Teaching Skills

ERIC Educational Resources Information Center

Ezeudu, F. O.; Chiaha, G. T. U.; Eze, J. U.

2013-01-01

The study was designed to develop and factorially validate an instrument for measuring teaching practice skills of chemistry student-teachers in University of Nigeria, Nsukka. Two research questions guided the study. The design of the study was instrumentation. All the chemistry student-teachers in the Department of Science Education, University…

A Systematic Approach of Employing Quality by Design Principles: Risk Assessment and Design of Experiments to Demonstrate Process Understanding and Identify the Critical Process Parameters for Coating of the Ethylcellulose Pseudolatex Dispersion Using Non-Conventional Fluid Bed Process.

PubMed

Kothari, Bhaveshkumar H; Fahmy, Raafat; Claycamp, H Gregg; Moore, Christine M V; Chatterjee, Sharmista; Hoag, Stephen W

2017-05-01

The goal of this study was to utilize risk assessment techniques and statistical design of experiments (DoE) to gain process understanding and to identify critical process parameters for the manufacture of controlled release multiparticulate beads using a novel disk-jet fluid bed technology. The material attributes and process parameters were systematically assessed using the Ishikawa fish bone diagram and failure mode and effect analysis (FMEA) risk assessment methods. The high risk attributes identified by the FMEA analysis were further explored using resolution V fractional factorial design. To gain an understanding of the processing parameters, a resolution V fractional factorial study was conducted. Using knowledge gained from the resolution V study, a resolution IV fractional factorial study was conducted; the purpose of this IV study was to identify the critical process parameters (CPP) that impact the critical quality attributes and understand the influence of these parameters on film formation. For both studies, the microclimate, atomization pressure, inlet air volume, product temperature (during spraying and curing), curing time, and percent solids in the coating solutions were studied. The responses evaluated were percent agglomeration, percent fines, percent yield, bead aspect ratio, median particle size diameter (d50), assay, and drug release rate. Pyrobuttons® were used to record real-time temperature and humidity changes in the fluid bed. The risk assessment methods and process analytical tools helped to understand the novel disk-jet technology and to systematically develop models of the coating process parameters like process efficiency and the extent of curing during the coating process.

Sample size requirements for separating out the effects of combination treatments: randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis.

PubMed

Wolbers, Marcel; Heemskerk, Dorothee; Chau, Tran Thi Hong; Yen, Nguyen Thi Bich; Caws, Maxine; Farrar, Jeremy; Day, Jeremy

2011-02-02

In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 x 2 factorial design. We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 x 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Current Controlled Trials ISRCTN61649292.

Promoting contraceptive use among unmarried female migrants in one factory in Shanghai: a pilot workplace intervention.

PubMed

Qian, Xu; Smith, Helen; Huang, Wenyuan; Zhang, Jie; Huang, Ying; Garner, Paul

2007-05-31

In urban China, more single women are becoming pregnant and resorting to induced abortion, despite the wide availability of temporary methods of contraception. We developed and piloted a workplace-based intervention to promote contraceptive use in unmarried female migrants working in privately owned factories. Quasi-experimental design. In consultation with clients, we developed a workplace based intervention to promote contraception use in unmarried female migrants in a privately owned factory. We then implemented this in one factory, using a controlled before-and-after design. The intervention included lectures, bespoke information leaflets, and support to the factory doctors in providing a contraceptive service. 598 women participated: most were under 25, migrants to the city, with high school education. Twenty percent were lost when staff were made redundant, and implementation was logistically complicated. All women attended the initial lecture, and just over half the second lecture. Most reported reading the educational material provided (73%), but very few women reported using the free family planning services offered at the factory clinic (5%) or the Family Planning Institute (3%). At baseline, 90% (N = 539) stated that contraceptives were required if having sex before marriage; of those reporting sex in the last three months, the majority reporting using contraceptives (78%, 62/79) but condom use was low (44%, 35/79). Qualitative data showed that the reading material seemed to be popular and young women expressed a need for more specific reproductive health information, particularly on HIV/AIDS. Women wanted services with some privacy and anonymity, and views on the factory service were mixed. Implementing a complex intervention with a hard to reach population through a factory in China, using a quasi-experimental design, is not easy. Further research should focus on the specific needs and service preferences of this population and these should be considered in any policy reform so that contraceptive use may be encouraged among young urban migrant workers.

Accomplishments of the heavy electron particle accelerator program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Stratakis, D.; Palmer, M.

The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy lepton colliders (HLCs) from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of νe (more » $$\\bar{ve}$$) and $$\\bar{vμ}$$ (νμ) beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components have been obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and the precise physics goals become apparent.« less

Muon Sources for Particle Physics - Accomplishments of the Muon Accelerator Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Stratakis, D.; Palmer, M.

The Muon Accelerator Program (MAP) completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of lepton colliders from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of νe (ν more » $$\\bar{e}$$) and ν $$\\bar{μ}$$) (ν μ) beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components were obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and clearly associated physics goals become apparent« less

Nonmedical influences on medical decision making: an experimental technique using videotapes, factorial design, and survey sampling.

PubMed Central

Feldman, H A; McKinlay, J B; Potter, D A; Freund, K M; Burns, R B; Moskowitz, M A; Kasten, L E

1997-01-01

OBJECTIVE: To study nonmedical influences on the doctor-patient interaction. A technique using simulated patients and "real" doctors is described. DATA SOURCES: A random sample of physicians, stratified on such characteristics as demographics, specialty, or experience, and selected from commercial and professional listings. STUDY DESIGN: A medical appointment is depicted on videotape by professional actors. The patient's presenting complaint (e.g., chest pain) allows a range of valid interpretation. Several alternative versions are taped, featuring the same script with patient-actors of different age, sex, race, or other characteristics. Fractional factorial design is used to select a balanced subset of patient characteristics, reducing costs without biasing the outcome. DATA COLLECTION: Each physician is shown one version of the videotape appointment and is asked to describe how he or she would diagnose or treat such a patient. PRINCIPAL FINDINGS: Two studies using this technique have been completed to date, one involving chest pain and dyspnea and the other involving breast cancer. The factorial design provided sufficient power, despite limited sample size, to demonstrate with statistical significance various influences of the experimental and stratification variables, including the patient's gender and age and the physician's experience. Persistent recruitment produced a high response rate, minimizing selection bias and enhancing validity. CONCLUSION: These techniques permit us to determine, with a degree of control unattainable in observational studies, whether medical decisions as described by actual physicians and drawn from a demographic or professional group of interest, are influenced by a prescribed set of nonmedical factors. PMID:9240285

The preparation and evaluation of sustained release suppositories containing ketoprofen and Eudragit RL 100 by using factorial design.

PubMed

Ozgüney, I; Ozcan, I; Ertan, G; Güneri, T

2007-01-01

The preparation of ketoprofen (KP) sustained release (SR) suppositories was designed according to the 3(2) x 2(1) factorial design as three different KP:Eudragit RL 100 ratios (1:0.5, 1:1, 1:2), three particle sizes of prepared granules (250-500, 500-710, and 710-1000 microm) and two different PEG 400:PEG 6000 ratios (40:60, 50:50). The conventional KP suppositories were also prepared by using Witepsol H 15, Massa Estarinum B, Cremao and the mixture of PEG 400:PEG 6000. The dissolution studies of suppositories prepared were carried out according to the USP XXIII basket method in the phosphate buffer (pH = 7.2) at 50 rpm, and it was shown that the dissolution time was sustained up to 8 hours. According to the results of the factorial design, the most important independent variable on t50 and t80 was drug:polymer ratios. The log of partition coefficient of KP was determined as 1.46, showing the high affinity to the oily phase. n exponent and kinetic studies were conducted to explain diffusion mechanism, and it is understood that if the inert KP:Eudragit RL 100 ratio is increased in the particles, the Fickian difusion dominates and the best kinetic turns to Higuchi from the Hixson-Crowell. There is neither crystalline form of KP nor degradation product in the suppositories detected with the differential scanning calorimetry (DSC) studies. In addition to these studies, antiinflammatory activity of SR suppositories also determined that it was significantly extended according to the conventional suppositories.

Study on effects of E-glass fiber hybrid composites enhanced with multi-walled carbon nanotubes under tensile load using full factorial design of experiments

NASA Astrophysics Data System (ADS)

Musthak, Md.; Madhavi, M.; Ahsanullah, F. M.

2017-08-01

Carbon nanotubes (CNT's) are attracting scientific and industrial interest by virtue of their outstanding characteristics. The present research problem deals with the fabrication and characterization of E-glass fiber composites enhanced by carbon nanotubes. In the present study, three factors with two levels are considered. Hence, the design is called 23 full factorial design of experiment. The process parameters considered for the present problem are weight of multi-walled carbon nanotubes, process to disperse nano-particles in resin, and orientation of woven fabric. In addition, their levels considered for the experiment are higher level (+1) and lower level (-1). Fabrication of E-glass fiber composites was carried out according to design, and the specimens were prepared with respect to the ASTM standards D3039-76 and tensile testing was performed. The results show that the nano-particulated composite plate can be manufactured by considering lower level nano-particles stirred with probe sonicator and plied-up with hybrid orientation.

Strategic Investment Plan Fiscal Year 1993.

DTIC Science & Technology

1993-09-01

Groundwater ........................ 283 Heavy Metals in Soils, Sludges, Sediments and Water .................... 321 Energetics in Soils and Groundwater...technologies and tools to achieve a design for reconfiguring existing PEP production facilities into agile factories which will reduce total life cycle wastes...facilities. When use of existing facilities is not practical, a special demonstration testbed may be built. The factory design will then be developed

A factory concept for processing and manufacturing with lunar material

NASA Technical Reports Server (NTRS)

Driggers, G. W.

1977-01-01

A conceptual design for an orbital factory sized to process 1.5 million metric tons per year of raw lunar fines into 0.3 million metric tons of manufacturing materials is presented. A conservative approach involving application of present earth-based technology leads to a design devoid of new inventions. Earth based counterparts to the factory machinery were used to generate subsystem masses and lumped parameters for volume and mass estimates. The results are considered to be conservative since technologies more advanced than those assumed are presently available in many areas. Some attributes of potential space processing technologies applied to material refinement and component manufacture are discussed.

Using Bayesian variable selection to analyze regular resolution IV two-level fractional factorial designs

DOE PAGES

Chipman, Hugh A.; Hamada, Michael S.

2016-06-02

Regular two-level fractional factorial designs have complete aliasing in which the associated columns of multiple effects are identical. Here, we show how Bayesian variable selection can be used to analyze experiments that use such designs. In addition to sparsity and hierarchy, Bayesian variable selection naturally incorporates heredity . This prior information is used to identify the most likely combinations of active terms. We also demonstrate the method on simulated and real experiments.

Using Bayesian variable selection to analyze regular resolution IV two-level fractional factorial designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chipman, Hugh A.; Hamada, Michael S.

Regular two-level fractional factorial designs have complete aliasing in which the associated columns of multiple effects are identical. Here, we show how Bayesian variable selection can be used to analyze experiments that use such designs. In addition to sparsity and hierarchy, Bayesian variable selection naturally incorporates heredity . This prior information is used to identify the most likely combinations of active terms. We also demonstrate the method on simulated and real experiments.

Double jeopardy in inferring cognitive processes

PubMed Central

Fific, Mario

2014-01-01

Inferences we make about underlying cognitive processes can be jeopardized in two ways due to problematic forms of aggregation. First, averaging across individuals is typically considered a very useful tool for removing random variability. The threat is that averaging across subjects leads to averaging across different cognitive strategies, thus harming our inferences. The second threat comes from the construction of inadequate research designs possessing a low diagnostic accuracy of cognitive processes. For that reason we introduced the systems factorial technology (SFT), which has primarily been designed to make inferences about underlying processing order (serial, parallel, coactive), stopping rule (terminating, exhaustive), and process dependency. SFT proposes that the minimal research design complexity to learn about n number of cognitive processes should be equal to 2n. In addition, SFT proposes that (a) each cognitive process should be controlled by a separate experimental factor, and (b) The saliency levels of all factors should be combined in a full factorial design. In the current study, the author cross combined the levels of jeopardies in a 2 × 2 analysis, leading to four different analysis conditions. The results indicate a decline in the diagnostic accuracy of inferences made about cognitive processes due to the presence of each jeopardy in isolation and when combined. The results warrant the development of more individual subject analyses and the utilization of full-factorial (SFT) experimental designs. PMID:25374545

de novo computational enzyme design.

PubMed

Zanghellini, Alexandre

2014-10-01

Recent advances in systems and synthetic biology as well as metabolic engineering are poised to transform industrial biotechnology by allowing us to design cell factories for the sustainable production of valuable fuels and chemicals. To deliver on their promises, such cell factories, as much as their brick-and-mortar counterparts, will require appropriate catalysts, especially for classes of reactions that are not known to be catalyzed by enzymes in natural organisms. A recently developed methodology, de novo computational enzyme design can be used to create enzymes catalyzing novel reactions. Here we review the different classes of chemical reactions for which active protein catalysts have been designed as well as the results of detailed biochemical and structural characterization studies. We also discuss how combining de novo computational enzyme design with more traditional protein engineering techniques can alleviate the shortcomings of state-of-the-art computational design techniques and create novel enzymes with catalytic proficiencies on par with natural enzymes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Examining robustness of model selection with half-normal and LASSO plots for unreplicated factorial designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jang, Dae -Heung; Anderson-Cook, Christine Michaela

When there are constraints on resources, an unreplicated factorial or fractional factorial design can allow efficient exploration of numerous factor and interaction effects. A half-normal plot is a common graphical tool used to compare the relative magnitude of effects and to identify important effects from these experiments when no estimate of error from the experiment is available. An alternative is to use a least absolute shrinkage and selection operation plot to examine the pattern of model selection terms from an experiment. We examine how both the half-normal and least absolute shrinkage and selection operation plots are impacted by the absencemore » of individual observations or an outlier, and the robustness of conclusions obtained from these 2 techniques for identifying important effects from factorial experiments. As a result, the methods are illustrated with 2 examples from the literature.« less

Examining robustness of model selection with half-normal and LASSO plots for unreplicated factorial designs

DOE PAGES

Jang, Dae -Heung; Anderson-Cook, Christine Michaela

2017-04-12

When there are constraints on resources, an unreplicated factorial or fractional factorial design can allow efficient exploration of numerous factor and interaction effects. A half-normal plot is a common graphical tool used to compare the relative magnitude of effects and to identify important effects from these experiments when no estimate of error from the experiment is available. An alternative is to use a least absolute shrinkage and selection operation plot to examine the pattern of model selection terms from an experiment. We examine how both the half-normal and least absolute shrinkage and selection operation plots are impacted by the absencemore » of individual observations or an outlier, and the robustness of conclusions obtained from these 2 techniques for identifying important effects from factorial experiments. As a result, the methods are illustrated with 2 examples from the literature.« less

Sb2Te3 and Its Superlattices: Optimization by Statistical Design.

PubMed

Behera, Jitendra K; Zhou, Xilin; Ranjan, Alok; Simpson, Robert E

2018-05-02

The objective of this work is to demonstrate the usefulness of fractional factorial design for optimizing the crystal quality of chalcogenide van der Waals (vdW) crystals. We statistically analyze the growth parameters of highly c axis oriented Sb 2 Te 3 crystals and Sb 2 Te 3 -GeTe phase change vdW heterostructured superlattices. The statistical significance of the growth parameters of temperature, pressure, power, buffer materials, and buffer layer thickness was found by fractional factorial design and response surface analysis. Temperature, pressure, power, and their second-order interactions are the major factors that significantly influence the quality of the crystals. Additionally, using tungsten rather than molybdenum as a buffer layer significantly enhances the crystal quality. Fractional factorial design minimizes the number of experiments that are necessary to find the optimal growth conditions, resulting in an order of magnitude improvement in the crystal quality. We highlight that statistical design of experiment methods, which is more commonly used in product design, should be considered more broadly by those designing and optimizing materials.

Polychlorinated dibenzo-p-dioxins and dibenzofurans and their association with cancer mortality among workers in one automobile foundry factory.

PubMed

Wang, Lihua; Weng, Shaofan; Wen, Sheng; Shi, Tingming; Sun, Gangtao; Zeng, Yuyu; Qi, Cheng; Chen, Weihong

2013-01-15

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) have been reported as possible carcinogenic hazards to humans. However, epidemiological studies on their carcinogenic roles are limited. The current study was designed to determine the concentrations and characteristics of PCDD/Fs and evaluate their association with cancer mortality in exposed workers in one automobile foundry factory. PCDD/F levels in factory and surrounding environment were analyzed through air and settling dust sampling. The cancer mortalities among workers in this foundry factory were calculated using data from a cohort study. The results showed that the PCDD/F concentrations of air in workplace ranged 0.36-2.25 pg World Health Organization-Toxic Equivalent (WHO-TEQ) Nm(-3) (average 1.01 pg WHO-TEQ Nm(-3)), which were 1.16-7.26 times higher than those outside the factory. The PCDD/F concentrations of settling dust in the workplace ranged 3.34-18.64 pg WHO-TEQ g(-1) (average 8.25 pg WHO-TEQ g(-1)), which were lower than those just outside the factory (average 16.13 pg WHO-TEQ g(-1)). Furthermore, a cohort study of workers in this factory with average follow-up of 24.52 years showed that cancer was the leading cause of death, with significant elevated mortality (standardized mortality ratio (SMR)=1.70, 95% confidence interval (CI): 1.35-2.13) among workers, when compared with Chinese national mortality. The cancer mortality among front-line workers was increased significantly (adjusted relative risk (RR)=1.73, 95% CI: 1.14-2.60), particularly among melting and casting workers, when compared with that among assistant workers. Our results indicated that there was a dose-response relationship between PCDD/F exposure and cancer mortality among foundry workers. Copyright © 2012 Elsevier B.V. All rights reserved.

[Study of combined effects of DES and EV on the proliferation of MCF-7 cells by two experimental designs].

PubMed

Liu, Qian; Lei, Bing-Li; An, Jing; Shang, Yu; Zhong, Yu-Fang; Kang, Jia; Wen, Yu

2013-08-01

The single toxicity of diethylstilbestrol (DES) and beta-estradiol 17-valerate (EV) and the joint toxicity of their binary mixtures in equiconcentration to the proliferation of MCF-7 cells were investigated, respectively. Additive index (AI) method was adopted to evaluate the joint toxicity effect. At the same time, 3 x 3 factorial experimental design was used to verify the joint toxiciy types derived from equiconcentration of DES and EV. The results show that the EC50 values of single EV and DES for 24, 48 and 72 h are 6.02, 0.40 and 0.33 nmol x L(-1) and 5.90, 6.98 and 2.90 nmol x L(-1), respectively. The EC50 values of the binary mixtures of DES and EV for 24, 48 and 72 h are 2.33, 0.71 and 0.39 nmol x L(-1). The binary joint effects of DES and EV for 24 h were synergistic, and the joint effects of DES and EV for 48 and 72 h were antagonistic. But synergistic and antagonistic effects are not strong; their values can be found close to the values of additive effects. Factorial experiment results show that combined effects of DES and EV to proliferation of MCF-7 cells for 24, 48 and 72 h three exposure periods are additive effect types. The consistent joint combined effect types can be drawn from both factorial experimental design and equiconcentration ratio of DES and EV to the proliferation of MCF-7 cells. However, the factorial experimental design is simpler and more convenient, and can avoid unnecessary mistakes due to the derivation of EC50 values.

Effects of Computer Animation Instructional Package on Students' Achievement in Practical Biology

ERIC Educational Resources Information Center

Hamzat, Abdulrasaq; Bello, Ganiyu; Abimbola, Isaac Olakanmi

2017-01-01

This study examined the effects of computer animation instructional package on secondary school students' achievement in practical biology in Ilorin, Nigeria. The study adopted a pre-test, post-test, control group, non-randomised and nonequivalent quasi-experimental design, with a 2x2x3 factorial design. Two intact classes from two secondary…

Car Assembly Line Efficiency Improvement by Lean Principle

NASA Astrophysics Data System (ADS)

Sawassalung, Suwalee; Chutima, Parames

2017-06-01

This research aimed to increase the efficiency of actual working time to compare to design standard time ratio (DSTR) as per analysing process of Lean System of the assembly line in a car manufacturer in Thailand. Currently, the case study factory and its group of factories, which have many branches all over the world, have competed with each other on quality, delivered time and production cost. The production cost which can reduce without affecting quality and acceptable by clients is the manpower cost. The index of competition is DSTR. The factory now has DSTR of 6.13 and DSTR of the assembly department is 4.24 which is very high comparing to other departments. The low DSTR indicates that the factory has good quality. The ways to solve the problem are to apply the following tools, i.e. Lean principle, Value Stream Mapping (VSM), Waste Analysis and ECRS. After implementing the above tools, the results showed that DSTR decreased from 4.24 to 4.06 or 4.25%.

Evaluation of an Online "Teachable Moment" Dietary Intervention

ERIC Educational Resources Information Center

Marks, Leah; Ogden, Jane

2017-01-01

Purpose: The purpose of this paper is to evaluate an online "teachable moment" intervention to promote healthy eating for overweight and food intolerance symptoms. Design/methodology/approach: The study involves a 2×2 factorial design with two conditions: group (weight loss vs food intolerance) and condition (intervention vs control).…

Minifactory: a precision assembly system adaptable to the product life cycle

NASA Astrophysics Data System (ADS)

Muir, Patrick F.; Rizzi, Alfred A.; Gowdy, Jay W.

1997-12-01

Automated product assembly systems are traditionally designed with the intent that they will be operated with few significant changes for as long as the product is being manufactured. This approach to factory design and programming has may undesirable qualities which have motivated the development of more 'flexible' systems. In an effort to improve agility, different types of flexibility have been integrated into factory designs. Specifically, automated assembly systems have been endowed with the ability to assemble differing products by means of computer-controlled robots, and to accommodate variations in parts locations and dimensions by means of sensing. The product life cycle (PLC) is a standard four-stage model of the performance of a product from the time that it is first introduced in the marketplace until the time that it is discontinued. Manufacturers can improve their return on investment by adapting the production process to the PLC. We are developing two concepts to enable manufacturers to more readily achieve this goal: the agile assembly architecture (AAA), an abstract framework for distributed modular automation; and minifactory, our physical instantation of this architecture for the assembly of precision electro-mechanical devices. By examining the requirements which each PLC stage places upon the production system, we identify characteristics of factory design and programming which are appropriate for that stage. As the product transitions from one stage to the next, the factory design and programing should also transition from one embodiment to the next in order to achieve the best return on investment. Modularity of the factory components, highly flexible product transport mechanisms, and a high level of distributed intelligence are key characteristics of minifactory that enable this adaptation.

Multi-registration of software library resources

DOEpatents

Archer, Charles J [Rochester, MN; Blocksome, Michael A [Rochester, MN; Ratterman, Joseph D [Rochester, MN; Smith, Brian E [Rochester, MN

2011-04-05

Data communications, including issuing, by an application program to a high level data communications library, a request for initialization of a data communications service; issuing to a low level data communications library a request for registration of data communications functions; registering the data communications functions, including instantiating a factory object for each of the one or more data communications functions; issuing by the application program an instruction to execute a designated data communications function; issuing, to the low level data communications library, an instruction to execute the designated data communications function, including passing to the low level data communications library a call parameter that identifies a factory object; creating with the identified factory object the data communications object that implements the data communications function according to the protocol; and executing by the low level data communications library the designated data communications function.

Front End for a neutrino factory or muon collider

NASA Astrophysics Data System (ADS)

Neuffer, D.; Snopok, P.; Alexahin, Y.

2017-11-01

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ 's produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a varphi -δ E rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an "HFOFO Snake" configuration that cools both μ+ and μ- transversely and longitudinally. The status of the design is presented and variations are discussed.

B factory plans at Cornell

NASA Astrophysics Data System (ADS)

Berkelman, Karl

1989-12-01

Recent upgrade project at the Cornell Electron Storage Ring is discussed. Modification was made to make B mesons factory design possible. The CLEO detector has been rebuilt with a new superconducting magnet and a high resolution electromagnetic calorimeter made of cesium iodide scintillators.(AIP)

Screening Experiments and the Use of Fractional Factorial Designs in Behavioral Intervention Research

PubMed Central

Nair, Vijay; Strecher, Victor; Fagerlin, Angela; Ubel, Peter; Resnicow, Kenneth; Murphy, Susan; Little, Roderick; Chakraborty, Bibhas; Zhang, Aijun

2008-01-01

Health behavior intervention studies have focused primarily on comparing new programs and existing programs via randomized controlled trials. However, numbers of possible components (factors) are increasing dramatically as a result of developments in science and technology (e.g., Web-based surveys). These changes dictate the need for alternative methods that can screen and quickly identify a large set of potentially important treatment components. We have developed and implemented a multiphase experimentation strategy for accomplishing this goal. We describe the screening phase of this strategy and the use of fractional factorial designs (FFDs) in studying several components economically. We then use 2 ongoing behavioral intervention projects to illustrate the usefulness of FFDs. FFDs should be supplemented with follow-up experiments in the refining phase so any critical assumptions about interactions can be verified. PMID:18556602

Factor Structure, Factorial Invariance, and Validity of the Multidimensional Shame-Related Response Inventory-21 (MSRI-21)

PubMed Central

Garcia, Antonio F.; Acosta, Melina; Pirani, Saifa; Edwards, Daniel; Osman, Augustine

2017-01-01

We describe 2 studies designed to evaluate scores on the Multidimensional Shame-related Response Inventory-21 (MSRI-21), a recently developed instrument that measures affective and behavioral responses to shame. The inventory assesses shame-related responses in 3 categories: negative self-evaluation, fear of social consequences, and maladaptive behavior tendency. For Study 1, (N = 743) undergraduates completed the MSRI-21. Confirmatory factor analysis supported the validity of the MSRI-21 3-factor structure. Latent variable modeling of coefficient-α provided strong evidence for the internal consistency of scores on each scale. In Study 2, (N = 540) undergraduates completed the instrument along with 5 concurrent measures chosen for clinical significance. Achievement of factorial invariance supported the use of MSRI-21 scale scores to make valid mean comparisons across gender. In addition, MSRI-21 scale scores were associated as expected with scores on measures of self-harm, suicide, and other risk factors. Taken together, results of 2 studies support the internal consistency reliability, factorial validity, factorial invariance, and convergent validity of scores on the MSRI-21. Further work is needed to assess the temporal stability of the MSRI-21 scale scores, invariance across clinical status and other groupings, item-level measurement properties, and viability in highly symptomatic samples. PMID:28182490

The simulation of air recirculation and fire/explosion phenomena within a semiconductor factory.

PubMed

I, Yet-Pole; Chiu, Yi-Long; Wu, Shi-Jen

2009-04-30

The semiconductor industry is the collection of capital-intensive firms that employ a variety of hazardous chemicals and engage in the design and fabrication of semiconductor devices. Owing to its processing characteristics, the fully confined structure of the fabrication area (fab) and the vertical airflow ventilation design restrict the applications of traditional consequence analysis techniques that are commonly used in other industries. The adverse situation also limits the advancement of a fire/explosion prevention design for the industry. In this research, a realistic model of a semiconductor factory with a fab, sub-fabrication area, supply air plenum, and return air plenum structures was constructed and the computational fluid dynamics algorithm was employed to simulate the possible fire/explosion range and its severity. The semiconductor factory has fan module units with high efficiency particulate air filters that can keep the airflow uniform within the cleanroom. This condition was modeled by 25 fans, three layers of porous ceiling, and one layer of porous floor. The obtained results predicted very well the real airflow pattern in the semiconductor factory. Different released gases, leak locations, and leak rates were applied to investigate their influence on the hazard range and severity. Common mitigation measures such as a water spray system and a pressure relief panel were also provided to study their potential effectiveness to relieve thermal radiation and overpressure hazards within a fab. The semiconductor industry can use this simulation procedure as a reference on how to implement a consequence analysis for a flammable gas release accident within an air recirculation cleanroom.

Sample size requirements for separating out the effects of combination treatments: Randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis

PubMed Central

2011-01-01

Background In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 × 2 factorial design. Methods We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. Results In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Conclusions Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 × 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Trial registration Current Controlled Trials ISRCTN61649292 PMID:21288326

The Impact of Interactive Environment and Metacognitive Support on Academic Achievement and Transactional Distance in Online Learning

ERIC Educational Resources Information Center

Yilmaz, Ramazan; Keser, Hafize

2017-01-01

The aim of the present study is to reveal the impact of the interactive environment and metacognitive support (MS) in online learning on academic achievement and transactional distance (TD). The study is designed as 2 × 2 factorial design, and both qualitative and quantitative research techniques are used. The study was carried out on 127…

Family context assessment in a public health study.

PubMed

Velasco, David; Sánchez de Miguel, Manuel; Egurza, Maitane; Arranz, Enrique; Aranbarri, Aritz; Fano, Eduardo; Ibarluzea, Jesús

2014-01-01

To analyze the factorial structure of a new instrument to assess the quality of the family context (Etxadi-Gangoiti Scale) in a sample from the Gipuzkoa cohort of the Environment and Childhood (Infancia y Medio Ambiente [INMA]) study. Families in a sample of 433 two-year-old children were assessed in a home visit with subsequent analysis of the factorial structure and psychometric properties of the data. An exploratory factorial analysis (principal axis factoring and varimax rotation) and a confirmatory factorial analysis were carried out; partial confirmation of the original factorial structure of the instrument was obtained, which revealed the following factorial structures. Subscale (1): promotion of cognitive and linguistic development, social skills, psychomotor skills, and pretend play and imitation; subscale (2): promotion of independence and self-esteem, provision of optimal frustration, social and emotional quality of the relationship, and absence of physical punishment; subscale (3): paternal involvement, low exposure to family conflict, low frequency of family conflict, relationship with the extended family, social support, diversity of experiences, low frequency of stressful events, and low parental perception of stress. The structure of the original instrument structure was partially confirmed, which was attributed to the characteristics of the sample. We stress the importance of the variability obtained in the evaluation of the families, as well as of adequate indicators of reliability in such evaluation. The new instrument could be used in public health to identify deficient family contexts and to design preventive interventions focused on parenting skills. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

The Idea Factory: An Interactive Intergroup Exercise

ERIC Educational Resources Information Center

Rosh, Lisa; Leach, Evan

2011-01-01

This article outlines the Idea Factory exercise, an interactive exercise designed to help participants examine group, individual, and organizational factors that affect intergroup conflict. Specific emphasis is placed on exploring the relationship between intra- and intergroup dynamics and identifying managerial practices that foster effective…

Replicating systems concepts: Self-replicating lunar factory and demonstration

NASA Technical Reports Server (NTRS)

1982-01-01

Automation of lunar mining and manufacturing facility maintenance and repair is addressed. Designing the factory as an automated, multiproduct, remotely controlled, reprogrammable Lunar Manufacturing Facility capable of constructing duplicates of itself which would themselves be capable of further replication is proposed.

Interim Design Report for the International Design Study for a Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choubey, S.; Gandhi, R.; Goswami, S.

2011-10-01

The starting point for the International Design Study for the Neutrino Factory (the IDS-NF) was the output of the earlier International Scoping Study for a future Neutrino Factory and super-beam facility (the ISS). The accelerator facility described in section 2 incorporates the improvements that have been derived from the substantial amount of work carried out within the Accelerator Working Group. Highlights of these improvements include: (1) Initial concepts for the implementation of the proton driver at each of the three example sites, CERN, FNAL, and RAL; (2) Detailed studies of the energy deposition in the target area; (3) A reductionmore » in the length of the muon beam phase-rotation and bunching systems; (4) Detailed analyses of the impact of the risk that stray magnetic field in the accelerating cavities in the ionization cooling channel will reduce the maximum operating gradient. Several alternative ionization-cooling lattices have been developed as fallback options to mitigate this technical risk; (5) Studies of particle loss in the muon front-end and the development of strategies to mitigate the deleterious effects of such losses; (6) The development of more complete designs for the muon linac and re-circulating linacs; (7) The development of a design for the muon FFAG that incorporates insertions for injection and extraction; and (8) Detailed studies of diagnostics in the decay ring. Other sub-systems have undergone a more 'incremental' evolution; an indication that the design of the Neutrino Factory has achieved a degree of maturity. The design of the neutrino detectors described in section 3 has been optimized and the Detector Working Group has made substantial improvements to the simulation and analysis of the Magnetized Iron Neutrino Detector (MIND) resulting in an improvement in the overall neutrino-detection efficiency and a reduction in the neutrino-energy threshold. In addition, initial consideration of the engineering of the MIND has generated a design that is feasible and a finite element analysis of the toroidal magnetic field to produce a realistic field map has been carried out. Section 3 also contains, for the first time, a specification for the near-detector systems and a demonstration that the neutrino flux can be determined with a precision of 1% through measurements of inverse muon decay at the near detector. The performance of the facility, the work of the Physics and Performance Evaluation Group, is described in section 1. The effect of the improved MIND performance is to deliver a discovery reach for CP-invariance violation in the lepton sector, the determination of the mass hierarchy, and of {theta}{sub 13} that extends down to values of sin{sup 2} 2{theta}{sub 13} {approx} 5 x 10{sup -5} and is robust against systematic uncertainties. In addition, the improved neutrino-energy threshold has allowed an indicative analysis of the kind of re-optimization of the facility that could be carried out should {theta}{sub 13} be found close to the current upper bound. The results presented in section 1 demonstrate that the discovery reach as well as the precision with which the oscillation parameters can be measured at the baseline Neutrino Factory is superior to that of other proposed facilities for all possible values of sin{sup 2} 2{theta}{sub 13}.« less

Investigation of the impact of trace elements on anaerobic volatile fatty acid degradation using a fractional factorial experimental design.

PubMed

Jiang, Ying; Zhang, Yue; Banks, Charles; Heaven, Sonia; Longhurst, Philip

2017-11-15

The requirement of trace elements (TE) in anaerobic digestion process is widely documented. However, little is understood regarding the specific requirement of elements and their critical concentrations under different operating conditions such as substrate characterisation and temperature. In this study, a flask batch trial using fractional factorial design is conducted to investigate volatile fatty acids (VFA) anaerobic degradation rate under the influence of the individual and combined effect of six TEs (Co, Ni, Mo, Se, Fe and W). The experiment inoculated with food waste digestate, spiked with sodium acetate and sodium propionate both to 10 g/l. This is followed by the addition of a selection of the six elements in accordance with a 2 6-2 fractional factorial principle. The experiment is conducted in duplicate and the degradation of VFA is regularly monitored. Factorial effect analysis on the experimental results reveals that within these experimental conditions, Se has a key role in promoting the degradation rates of both acetic and propionic acids; Mo and Co are found to have a modest effect on increasing propionic acid degradation rate. It is also revealed that Ni shows some inhibitory effects on VFA degradation, possibly due to its toxicity. Additionally, regression coefficients for the main and second order effects are calculated to establish regression models for VFA degradation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Manufacturing data analytics using a virtual factory representation.

PubMed

Jain, Sanjay; Shao, Guodong; Shin, Seung-Jun

2017-01-01

Large manufacturers have been using simulation to support decision-making for design and production. However, with the advancement of technologies and the emergence of big data, simulation can be utilised to perform and support data analytics for associated performance gains. This requires not only significant model development expertise, but also huge data collection and analysis efforts. This paper presents an approach within the frameworks of Design Science Research Methodology and prototyping to address the challenge of increasing the use of modelling, simulation and data analytics in manufacturing via reduction of the development effort. The use of manufacturing simulation models is presented as data analytics applications themselves and for supporting other data analytics applications by serving as data generators and as a tool for validation. The virtual factory concept is presented as the vehicle for manufacturing modelling and simulation. Virtual factory goes beyond traditional simulation models of factories to include multi-resolution modelling capabilities and thus allowing analysis at varying levels of detail. A path is proposed for implementation of the virtual factory concept that builds on developments in technologies and standards. A virtual machine prototype is provided as a demonstration of the use of a virtual representation for manufacturing data analytics.

VISUAL AND AUDIO PRESENTATION IN MACHINE PROGRAMED INSTRUCTION. FINAL REPORT.

ERIC Educational Resources Information Center

ALLEN, WILLIAM H.

THIS STUDY WAS PART OF A LARGER RESEARCH PROGRAM AIMED TOWARD DEVELOPMENT OF PARADIGMS OF MESSAGE DESIGN. OBJECTIVES OF THREE PARALLEL EXPERIMENTS WERE TO EVALUATE INTERACTIONS OF PRESENTATION MODE, PROGRAM TYPE, AND CONTENT AS THEY AFFECT LEARNER CHARACTERISTICS. EACH EXPERIMENT USED 18 TREATMENTS IN A FACTORIAL DESIGN WITH RANDOMLY SELECTED…

An Empirical Study of Eight Nonparametric Tests in Hierarchical Regression.

ERIC Educational Resources Information Center

Harwell, Michael; Serlin, Ronald C.

When normality does not hold, nonparametric tests represent an important data-analytic alternative to parametric tests. However, the use of nonparametric tests in educational research has been limited by the absence of easily performed tests for complex experimental designs and analyses, such as factorial designs and multiple regression analyses,…

Bayesian adaptive phase II screening design for combination trials.

PubMed

Cai, Chunyan; Yuan, Ying; Johnson, Valen E

2013-01-01

Trials of combination therapies for the treatment of cancer are playing an increasingly important role in the battle against this disease. To more efficiently handle the large number of combination therapies that must be tested, we propose a novel Bayesian phase II adaptive screening design to simultaneously select among possible treatment combinations involving multiple agents. Our design is based on formulating the selection procedure as a Bayesian hypothesis testing problem in which the superiority of each treatment combination is equated to a single hypothesis. During the trial conduct, we use the current values of the posterior probabilities of all hypotheses to adaptively allocate patients to treatment combinations. Simulation studies show that the proposed design substantially outperforms the conventional multiarm balanced factorial trial design. The proposed design yields a significantly higher probability for selecting the best treatment while allocating substantially more patients to efficacious treatments. The proposed design is most appropriate for the trials combining multiple agents and screening out the efficacious combination to be further investigated. The proposed Bayesian adaptive phase II screening design substantially outperformed the conventional complete factorial design. Our design allocates more patients to better treatments while providing higher power to identify the best treatment at the end of the trial.

Solenoid Fringe Field Effects for the Neutrino Factory Linac - MAD-X Investigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. Aslaninejad,C. Bontoiu,J. Pasternak,J. Pozimski,Alex Bogacz

2010-05-01

International Design Study for the Neutrino Factory (IDS-NF) assumes the first stage of muon acceleration (up to 900 MeV) to be implemented with a solenoid based Linac. The Linac consists of three styles of cryo-modules, containing focusing solenoids and varying number of SRF cavities for acceleration. Fringe fields of the solenoids and the focusing effects in the SRF cavities have significant impact on the transverse beam dynamics. Using an analytical formula, the effects of fringe fields are studied in MAD-X. The resulting betatron functions are compared with the results of beam dynamics simulations using OptiM code.

Application of two-level factorial design to investigate the effect of process parameters on the sonocrystallization of sulfathiazole

NASA Astrophysics Data System (ADS)

Kuo, Peng-Hsuan; Zhang, Bo-Cong; Su, Chie-Shaan; Liu, Jun-Jen; Sheu, Ming-Thau

2017-08-01

In this study, cooling sonocrystallization was used to recrystallize an active pharmaceutical ingredient, sulfathiazole, using methanol as the solvent. The effects of three operating parameters-sonication intensity, sonication duration, and solution concentration-on the recrystallization were investigated by using a 2k factorial design. The solid-state properties of sulfathiazole, including the mean particle size, crystal habit, and polymorphic form, were analyzed. Analysis of variance showed that the effect of the sonication intensity, cross-interaction effect of sonication intensity/sonication duration, and cross-interaction effect of sonication intensity/solution concentration on the recrystallization were significant. The results obtained using the 2k factorial design indicated that a combination of high sonication intensity and long sonication duration is not favorable for sonocrystallization, especially at a high solution concentration. A comparison of the solid-state properties of the original and the recrystallized sulfathiazole revealed that the crystal habit of the recrystallized sulfathiazole was more regular and that its mean particle size could be reduced to approximately 10 μm. Furthermore, the analytical results obtained using the PXRD, DSC, and FTIR spectroscopy indicated that the polymorphic purity of sulfathiazole improved from the original Form III/IV mixture to Form III after sonocrystallization.

In Silico Constraint-Based Strain Optimization Methods: the Quest for Optimal Cell Factories

PubMed Central

Maia, Paulo; Rocha, Miguel

2015-01-01

SUMMARY Shifting from chemical to biotechnological processes is one of the cornerstones of 21st century industry. The production of a great range of chemicals via biotechnological means is a key challenge on the way toward a bio-based economy. However, this shift is occurring at a pace slower than initially expected. The development of efficient cell factories that allow for competitive production yields is of paramount importance for this leap to happen. Constraint-based models of metabolism, together with in silico strain design algorithms, promise to reveal insights into the best genetic design strategies, a step further toward achieving that goal. In this work, a thorough analysis of the main in silico constraint-based strain design strategies and algorithms is presented, their application in real-world case studies is analyzed, and a path for the future is discussed. PMID:26609052

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai

Similar to a super B-factory, a circular Higgs factory (CHF) will require strong focusing systems near the interaction points and a low-emittance lattice in the arcs to achieve a factory luminosity. At electron beam energy of 125 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at the 2% level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of a CHF. In this paper, an example will be provided to illustrate the beam dynamics in a CHF,more » emphasizing the chromatic optics. Basic optical modules and advanced analysis will be presented. Most importantly, we will show that 2% momentum aperture is achievable.« less

Front End for a neutrino factory or muon collider

DOE PAGES

Neuffer, David; Snopok, Pavel; Alexahin, Yuri

2017-11-30

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a Φ-δE rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both μ + and μ - transversely andmore » longitudinally. Finally, the status of the design is presented and variations are discussed.« less

Feasibility Study for an Asymmetric B Factory Based on PEP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chattapadhyay, A.; Hitlin, D.; Porter, F.

This report addresses the feasibility of designing and constructing an asymmetric B-factory based on the PEP storage ring at SLAC that can ultimately reach a luminosity of 1 X 10{sup 34} cm{sup -2}s{sup -1}. Such a facility, operating at the {gamma}(4S) resonance, could be used to study mixing, rate decays, and CP violation in the B{bar B} system, and could also study tau and charm physics. The essential accelerator physics, engineering, and technology issues that must be addressed to successfully build this exciting and challenging facility are identified, and possible solutions, or R and D that will reasonable lead tomore » such solutions, are described.« less

Application of multi-factorial design of experiments to successfully optimize immunoassays for robust measurements of therapeutic proteins.

PubMed

Ray, Chad A; Patel, Vimal; Shih, Judy; Macaraeg, Chris; Wu, Yuling; Thway, Theingi; Ma, Mark; Lee, Jean W; Desilva, Binodh

2009-02-20

Developing a process that generates robust immunoassays that can be used to support studies with tight timelines is a common challenge for bioanalytical laboratories. Design of experiments (DOEs) is a tool that has been used by many industries for the purpose of optimizing processes. The approach is capable of identifying critical factors and their interactions with a minimal number of experiments. The challenge for implementing this tool in the bioanalytical laboratory is to develop a user-friendly approach that scientists can understand and apply. We have successfully addressed these challenges by eliminating the screening design, introducing automation, and applying a simple mathematical approach for the output parameter. A modified central composite design (CCD) was applied to three ligand binding assays. The intra-plate factors selected were coating, detection antibody concentration, and streptavidin-HRP concentrations. The inter-plate factors included incubation times for each step. The objective was to maximize the logS/B (S/B) of the low standard to the blank. The maximum desirable conditions were determined using JMP 7.0. To verify the validity of the predictions, the logS/B prediction was compared against the observed logS/B during pre-study validation experiments. The three assays were optimized using the multi-factorial DOE. The total error for all three methods was less than 20% which indicated method robustness. DOE identified interactions in one of the methods. The model predictions for logS/B were within 25% of the observed pre-study validation values for all methods tested. The comparison between the CCD and hybrid screening design yielded comparable parameter estimates. The user-friendly design enables effective application of multi-factorial DOE to optimize ligand binding assays for therapeutic proteins. The approach allows for identification of interactions between factors, consistency in optimal parameter determination, and reduced method development time.

Modeling and Recovery of Iron (Fe) from Red Mud by Coal Reduction

NASA Astrophysics Data System (ADS)

Zhao, Xiancong; Li, Hongxu; Wang, Lei; Zhang, Lifeng

Recovery of Fe from red mud has been studied using statistically designed experiments. The effects of three factors, namely: reduction temperature, reduction time and proportion of additive on recovery of Fe have been investigated. Experiments have been carried out using orthogonal central composite design and factorial design methods. A model has been obtained through variance analysis at 92.5% confidence level.

Mars surface based factory. Phase 2, task 1C: Computer control of a water treatment system to support a space colony on Mars

NASA Technical Reports Server (NTRS)

Fuller, John; Ali, Warsame; Willis, Danette

1989-01-01

In a continued effort to design a surface based factory on Mars for the production of oxygen and water, a preliminary study was made of the surface and atmospheric composition on Mars and determined the mass densities of the various gases in the Martian atmosphere. Based on the initial studies, oxygen and water were determined to be the two products that could be produced economically under the Martian conditions. Studies were also made on present production techniques to obtain water and oxygen. Analyses were made to evaluate the current methods of production that were adaptable to the Martian conditions. Even though the initial effort was the production of oxygen and water, it was found necessary to produce some diluted gases that can be mixed with the oxygen produced to constitute 'breathable' air. The conceptual design of a breathable air manufacturing system, a means of drilling for underground water, and storage of water for future use were completed. The design objective was the conceptual design of an integrated system for the supply of quality water for biological consumption, farming, residential and industrial use.

Automated array assembly

NASA Technical Reports Server (NTRS)

Daiello, R. V.

1977-01-01

A general technology assessment and manufacturing cost analysis was presented. A near-term (1982) factory design is described, and the results of an experimental production study for the large-scale production of flat-panel silicon and solar-cell arrays are detailed.

Automation U.S.A.: Overcoming Barriers to Automation.

ERIC Educational Resources Information Center

Brody, Herb

1985-01-01

Although labor unions and inadequate technology play minor roles, the principal barrier to factory automation is "fear of change." Related problems include long-term benefits, nontechnical executives, and uncertainty of factory cost accounting. Industry support for university programs is helping to educate engineers to design, implement, and…

Evaluating Effect of Students' Academic Achievement on Identified Difficult Concepts in Senior Secondary School Biology in Delta State

ERIC Educational Resources Information Center

Agboghoroma, Tim E.; Oyovwi, E. O.

2015-01-01

This study evaluated the effect of students' academic achievement on identified difficult concepts or topics in Senior Secondary School Biology in Delta State, Nigeria. The study was quasi-experimental and the design was a 2X2 factorial non-randomized pretest-posttest control group design. The sample was drawn from intact classes from four…

Influence of hydroxypropyl methylcellulose on drug release pattern of a gastroretentive floating drug delivery system using a 3(2) full factorial design.

PubMed

Swain, Kalpana; Pattnaik, Satyanarayan; Mallick, Subrata; Chowdary, Korla Appana

2009-01-01

In the present investigation, controlled release gastroretentive floating drug delivery system of theophylline was developed employing response surface methodology. A 3(2) randomized full factorial design was developed to study the effect of formulation variables like various viscosity grades and contents of hydroxypropyl methylcellulose (HPMC) and their interactions on response variables. The floating lag time for all nine experimental trial batches were less than 2 min and floatation time of more than 12 h. Theophylline release from the polymeric matrix system followed non-Fickian anomalous transport. Multiple regression analysis revealed that both viscosity and content of HPMC had statistically significant influence on all dependent variables but the effect of these variables found to be nonlinear above certain threshold values.

A systematic approach to designing statistically powerful heteroscedastic 2 × 2 factorial studies while minimizing financial costs.

PubMed

Jan, Show-Li; Shieh, Gwowen

2016-08-31

The 2 × 2 factorial design is widely used for assessing the existence of interaction and the extent of generalizability of two factors where each factor had only two levels. Accordingly, research problems associated with the main effects and interaction effects can be analyzed with the selected linear contrasts. To correct for the potential heterogeneity of variance structure, the Welch-Satterthwaite test is commonly used as an alternative to the t test for detecting the substantive significance of a linear combination of mean effects. This study concerns the optimal allocation of group sizes for the Welch-Satterthwaite test in order to minimize the total cost while maintaining adequate power. The existing method suggests that the optimal ratio of sample sizes is proportional to the ratio of the population standard deviations divided by the square root of the ratio of the unit sampling costs. Instead, a systematic approach using optimization technique and screening search is presented to find the optimal solution. Numerical assessments revealed that the current allocation scheme generally does not give the optimal solution. Alternatively, the suggested approaches to power and sample size calculations give accurate and superior results under various treatment and cost configurations. The proposed approach improves upon the current method in both its methodological soundness and overall performance. Supplementary algorithms are also developed to aid the usefulness and implementation of the recommended technique in planning 2 × 2 factorial designs.

Effect of fescue toxicosis on ruminal kinetics, nitrogen and energy balance in Holstein steers

USDA-ARS?s Scientific Manuscript database

This study was designed to examine alteration of ruminal kinetics, as well as N and energy balance during fescue toxicosis. Six ruminally cannulated Holstein steers (BW=217 ±7 kg) were weight-matched into pairs and pair-fed throughout a cross-over design experiment with a 2x2 factorial treatment str...

Muon Accelerator Program (MAP) | Neutrino Factory | Research Goals

Science.gov Websites

; Committees Research Goals Research & Development Design & Simulation Technology Development Systems Demonstrations Activities MASS Muon Cooling MuCool Test Area MICE Experiment MERIT Muon Collider Research Goals Why Muons at the Energy Frontier? How does it work? Graphics Animation Neutrino Factory Research Goals

The Old Factory

ERIC Educational Resources Information Center

Roman, Harry T.

2007-01-01

Technology education is not just about things, systems, and processes. It can also be about history, people, technological change, and impacts on society. In this design challenge, one uses technology education principles and ideas to convert an old factory into a museum and learning center. The challenge with this historical resource is to think…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adey, D.; Appleby, R. B.; Bayes, R.

Neutrino beams produced from the decay of muons in a racetrack-like decay ring (the so called Neutrino Factory) provide a powerful way to study neutrino oscillation physics and, in addition, provide unique beams for neutrino interaction studies. The Neutrinos from STORed Muons (nuSTORM) facility uses a neutrino factory-like design. Due to the particular nature of nuSTORM, it can also provide an intense, very pure, muon neutrino beam from pion decay. This so-called 'Neo-conventional' muon-neutrino beam from nuSTORM makes nuSTORM a hybrid neutrino factory. Here in this paper we describe the facility and give a detailed description of the neutrino beamsmore » that are available and the precision to which they can be characterized. We then show its potential for a neutrino interaction physics program and present sensitivity plots that indicate how well the facility can perform for short-baseline oscillation searches. Lastly, we comment on the performance potential of a 'Neo-conventional' muon neutrino beam optimized for long-baseline neutrino-oscillation physics.« less

Kinetic models in industrial biotechnology - Improving cell factory performance.

PubMed

Almquist, Joachim; Cvijovic, Marija; Hatzimanikatis, Vassily; Nielsen, Jens; Jirstrand, Mats

2014-07-01

An increasing number of industrial bioprocesses capitalize on living cells by using them as cell factories that convert sugars into chemicals. These processes range from the production of bulk chemicals in yeasts and bacteria to the synthesis of therapeutic proteins in mammalian cell lines. One of the tools in the continuous search for improved performance of such production systems is the development and application of mathematical models. To be of value for industrial biotechnology, mathematical models should be able to assist in the rational design of cell factory properties or in the production processes in which they are utilized. Kinetic models are particularly suitable towards this end because they are capable of representing the complex biochemistry of cells in a more complete way compared to most other types of models. They can, at least in principle, be used to in detail understand, predict, and evaluate the effects of adding, removing, or modifying molecular components of a cell factory and for supporting the design of the bioreactor or fermentation process. However, several challenges still remain before kinetic modeling will reach the degree of maturity required for routine application in industry. Here we review the current status of kinetic cell factory modeling. Emphasis is on modeling methodology concepts, including model network structure, kinetic rate expressions, parameter estimation, optimization methods, identifiability analysis, model reduction, and model validation, but several applications of kinetic models for the improvement of cell factories are also discussed. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Occupational hazards and safety measures amongst the paint factory workers in lagos, Nigeria.

PubMed

Awodele, Olufunsho; Popoola, Temidayo D; Ogbudu, Bawo S; Akinyede, Akin; Coker, Herbert A B; Akintonwa, Alade

2014-06-01

The manufacture of paint involves a variety of processes that present with medical hazards. Safety initiatives are hence introduced to limit hazard exposures and promote workplace safety. This aim of this study is to assess the use of available control measures/initiatives in selected paint factories in Lagos West Senatorial District, Nigeria. A total of 400 randomly selected paint factory workers were involved in the study. A well-structured World Health Organization standard questionnaire was designed and distributed to the workers to elicit information on awareness to occupational hazards, use of personal protective devices, and commonly experienced adverse symptoms. Urine samples were obtained from 50 workers randomly selected from these 400 participants, and the concentrations of the heavy metals (lead, cadmium, arsenic, and chromium) were determined using atomic absorption spectroscopy. The results show that 72.5% of the respondents are aware of the hazards associated with their jobs; 30% have had formal training on hazards and safety measures; 40% do not use personal protective devices, and 90% of the respondents reported symptoms relating to hazard exposure. There was a statistically significant (p < 0.05) increase in the mean heavy metal concentrations in the urine samples obtained from paint factory workers as compared with nonfactory workers. The need to develop effective frameworks that will initiate the integration and ensure implementation of safety regulations in paint factories is evident. Where these exist, there is a need to promote adherence to these practice guidelines.

A workplace intervention program and the increase in HIV knowledge, perceived accessibility and use of condoms among young factory workers in Thailand.

PubMed

Chamratrithirong, Aphichat; Ford, Kathleen; Punpuing, Sureeporn; Prasartkul, Pramote

2017-12-01

Vulnerability to Human Immunodeficiency Virus (HIV) infection among factory workers is a global problem. This study investigated the effectiveness of an intervention to increase AIDS knowledge, perceived accessibility to condoms and condom use among young factory workers in Thailand. The intervention was a workplace program designed to engage the private sector in HIV prevention. A cross-sectional survey conducted in 2008 to measure program outcomes in factories in Thailand was used in this study. The workplace intervention included the development of policies for management of HIV-positive employees, training sessions for managers and workers, and distribution of educational materials and condoms. A multi-level analysis was used to investigate the effect of HIV/AIDS prevention program components at the workplace on HIV/AIDS knowledge, perceived accessibility to condoms and condom use with regular sexual partners among 699 young factory workers (aged 18-24 years), controlling for their individual socio-demographic characteristics. Interventions related to the management and services component including workplace AIDS policy formulation, condom services programs and behavioral change campaigns were found to be significantly related to increased AIDS knowledge, perceived accessibility to condoms and condom use with regular partners. The effect of the HIV/AIDS training for managers, peer leaders and workers was positive but not statistically significant. With some revision of program components, scaling up of workplace interventions and the engagement of the private sector in HIV prevention should be seriously considered.

Multi-Reader ROC studies with Split-Plot Designs: A Comparison of Statistical Methods

PubMed Central

Obuchowski, Nancy A.; Gallas, Brandon D.; Hillis, Stephen L.

2012-01-01

Rationale and Objectives Multi-reader imaging trials often use a factorial design, where study patients undergo testing with all imaging modalities and readers interpret the results of all tests for all patients. A drawback of the design is the large number of interpretations required of each reader. Split-plot designs have been proposed as an alternative, in which one or a subset of readers interprets all images of a sample of patients, while other readers interpret the images of other samples of patients. In this paper we compare three methods of analysis for the split-plot design. Materials and Methods Three statistical methods are presented: Obuchowski-Rockette method modified for the split-plot design, a newly proposed marginal-mean ANOVA approach, and an extension of the three-sample U-statistic method. A simulation study using the Roe-Metz model was performed to compare the type I error rate, power and confidence interval coverage of the three test statistics. Results The type I error rates for all three methods are close to the nominal level but tend to be slightly conservative. The statistical power is nearly identical for the three methods. The coverage of 95% CIs fall close to the nominal coverage for small and large sample sizes. Conclusions The split-plot MRMC study design can be statistically efficient compared with the factorial design, reducing the number of interpretations required per reader. Three methods of analysis, shown to have nominal type I error rate, similar power, and nominal CI coverage, are available for this study design. PMID:23122570

Multi-reader ROC studies with split-plot designs: a comparison of statistical methods.

PubMed

Obuchowski, Nancy A; Gallas, Brandon D; Hillis, Stephen L

2012-12-01

Multireader imaging trials often use a factorial design, in which study patients undergo testing with all imaging modalities and readers interpret the results of all tests for all patients. A drawback of this design is the large number of interpretations required of each reader. Split-plot designs have been proposed as an alternative, in which one or a subset of readers interprets all images of a sample of patients, while other readers interpret the images of other samples of patients. In this paper, the authors compare three methods of analysis for the split-plot design. Three statistical methods are presented: the Obuchowski-Rockette method modified for the split-plot design, a newly proposed marginal-mean analysis-of-variance approach, and an extension of the three-sample U-statistic method. A simulation study using the Roe-Metz model was performed to compare the type I error rate, power, and confidence interval coverage of the three test statistics. The type I error rates for all three methods are close to the nominal level but tend to be slightly conservative. The statistical power is nearly identical for the three methods. The coverage of 95% confidence intervals falls close to the nominal coverage for small and large sample sizes. The split-plot multireader, multicase study design can be statistically efficient compared to the factorial design, reducing the number of interpretations required per reader. Three methods of analysis, shown to have nominal type I error rates, similar power, and nominal confidence interval coverage, are available for this study design. Copyright © 2012 AUR. All rights reserved.

Development of braided rope engine seals

NASA Technical Reports Server (NTRS)

Ko, Frank K.; Cai, Zhong; Mutharasan, Rajakkannu; Steinetz, Bruce M.

1994-01-01

In this study, after reviewing current seal design concepts, the potential of textile structures for seal design is examined from the material, structural, and fabrication points of view. Braided structures are identified as potential candidates for hypersonic seal structures because of their conformability and design flexibility. A large family of braided structures using 2-D and 3-D architecture can be designed using well established methods to produce a wide range of braiding yarn orientation for wear resistance as well as seal porosity control. As a first demonstration of the approach, 2-D braided fiberglass seals were fabricated according to a factorial design experiment by varying braiding angles, fractional longitudinal fibers, and preload pressure levels. Factorial diagrams and response surfaces were constructed to elucidate the inter-relationship of the braiding parameters as well as the effect of preload pressures on leakage resistance of the seal. It was found that seal resistance is a strong function of fractional longitudinal fiber content. As braiding angle increases, seal leakage resistance increases, especially at high preload pressures and in seals having high proportion of longitudinal fibers.

The effect of Gestalt laws of perceptual organization on the comprehension of three-variable bar and line graphs.

PubMed

Ali, Nadia; Peebles, David

2013-02-01

We report three experiments investigating the ability of undergraduate college students to comprehend 2 x 2 "interaction" graphs from two-way factorial research designs. Factorial research designs are an invaluable research tool widely used in all branches of the natural and social sciences, and the teaching of such designs lies at the core of many college curricula. Such data can be represented in bar or line graph form. Previous studies have shown, however, that people interpret these two graphical forms differently. In Experiment 1, participants were required to interpret interaction data in either bar or line graphs while thinking aloud. Verbal protocol analysis revealed that line graph users were significantly more likely to misinterpret the data or fail to interpret the graph altogether. The patterns of errors line graph users made were interpreted as arising from the operation of Gestalt principles of perceptual organization, and this interpretation was used to develop two modified versions of the line graph, which were then tested in two further experiments. One of the modifications resulted in a significant improvement in performance. Results of the three experiments support the proposed explanation and demonstrate the effects (both positive and negative) of Gestalt principles of perceptual organization on graph comprehension. We propose that our new design provides a more balanced representation of the data than the standard line graph for nonexpert users to comprehend the full range of relationships in two-way factorial research designs and may therefore be considered a more appropriate representation for use in educational and other nonexpert contexts.

Algorithm for designing smart factory Industry 4.0

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The designing task of production division of the Industry 4.0 item designing company is being studied. The authors proposed an algorithm, which is based on the modified V L Volkovich method. This algorithm allows generating options how to arrange the production with robotized technological equipment functioning in the automatic mode. The optimization solution of the multi-criteria task for some additive criteria is the base of the algorithm.

The Effect of Visual Cueing and Control Design on Children's Reading Achievement of Audio E-Books with Tablet Computers

ERIC Educational Resources Information Center

Wang, Pei-Yu; Huang, Chung-Kai

2015-01-01

This study aims to explore the impact of learner grade, visual cueing, and control design on children's reading achievement of audio e-books with tablet computers. This research was a three-way factorial design where the first factor was learner grade (grade four and six), the second factor was e-book visual cueing (word-based, line-based, and…

Structuring Video Cases to Support Future Teachers' Problem Solving

ERIC Educational Resources Information Center

Kale, Ugur; Whitehouse, Pamela

2012-01-01

This study examined preservice teachers' problem-solving skills through the use of an online video case study. Eighty preservice teachers participated in the study with a three-level video presentation by a two-grade-level between-subjects factorial design. The study incorporates a content analysis framework to examine both the components and the…

Virtual Collaborative Simulation Environment for Integrated Product and Process Development

NASA Technical Reports Server (NTRS)

Gulli, Michael A.

1997-01-01

Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

Design and Construction of a High-speed Network Connecting All the Protein Crystallography Beamlines at the Photon Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsugaki, Naohiro; Yamada, Yusuke; Igarashi, Noriyuki

2007-01-19

A private network, physically separated from the facility network, was designed and constructed which covered all the four protein crystallography beamlines at the Photon Factory (PF) and Structural Biology Research Center (SBRC). Connecting all the beamlines in the same network allows for simple authentication and a common working environment for a user who uses multiple beamlines. Giga-bit Ethernet wire-speed was achieved for the communication among the beamlines and SBRC buildings.

Metabolic modelling in the development of cell factories by synthetic biology

PubMed Central

Jouhten, Paula

2012-01-01

Cell factories are commonly microbial organisms utilized for bioconversion of renewable resources to bulk or high value chemicals. Introduction of novel production pathways in chassis strains is the core of the development of cell factories by synthetic biology. Synthetic biology aims to create novel biological functions and systems not found in nature by combining biology with engineering. The workflow of the development of novel cell factories with synthetic biology is ideally linear which will be attainable with the quantitative engineering approach, high-quality predictive models, and libraries of well-characterized parts. Different types of metabolic models, mathematical representations of metabolism and its components, enzymes and metabolites, are useful in particular phases of the synthetic biology workflow. In this minireview, the role of metabolic modelling in synthetic biology will be discussed with a review of current status of compatible methods and models for the in silico design and quantitative evaluation of a cell factory. PMID:24688669

A Randomized Longitudinal Factorial Design to Assess Malaria Vector Control and Disease Management Interventions in Rural Tanzania

PubMed Central

Kramer, Randall A.; Mboera, Leonard E. G.; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H.; Paul, Christopher J.; Miranda, Marie Lynn

2014-01-01

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials. PMID:24840349

A randomized longitudinal factorial design to assess malaria vector control and disease management interventions in rural Tanzania.

PubMed

Kramer, Randall A; Mboera, Leonard E G; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H; Paul, Christopher J; Miranda, Marie Lynn

2014-05-16

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials.

In-situ implant containing PCL-curcumin nanoparticles developed using design of experiments.

PubMed

Kasinathan, Narayanan; Amirthalingam, Muthukumar; Reddy, Neetinkumar D; Jagani, Hitesh V; Volety, Subrahmanyam M; Rao, Josyula Venkata

2016-01-01

Polymeric delivery system is useful in reducing pharmacokinetic limitations viz., poor absorption and rapid elimination associated with clinical use of curcumin. Design of experiment is a precise and cost effective tool useful in analyzing the effect of independent variables and their interaction on the product attributes. To evaluate the effect of process variables involved in preparation of curcumin-loaded polycaprolactone (PCL) nanoparticles (CPN). In the present experiment, CPNs were prepared by emulsification solvent evaporation technique. The effect of independent variables on the dependent variable was analyzed using design of experiments. Anticancer activity of CPN was studied using Ehrlich ascites carcinoma (EAC) model. In-situ implant was developed using PLGA as polymer. The effect of independent variables was studied in two stages. First, the effect of drug-polymer ratio, homogenization speed and surfactant concentration on size was studied using factorial design. The interaction of homogenization speed with homogenization time on mean particle size of CPN was then evaluated using central composite design. In the second stage, the effect of these variables (under the conditions optimized for producing particles <500 nm) on percentage drug encapsulation was evaluated using factorial design. CPN prepared under optimized conditions were able to control the development of EAC in Swiss albino mice and enhanced their survival time. PLGA based in-situ implant containing CPN prepared under optimized conditions showed sustained drug release. This implant could be further evaluated for pharmacological activities.

Bayesian adaptive phase II screening design for combination trials

PubMed Central

Cai, Chunyan; Yuan, Ying; Johnson, Valen E

2013-01-01

Background Trials of combination therapies for the treatment of cancer are playing an increasingly important role in the battle against this disease. To more efficiently handle the large number of combination therapies that must be tested, we propose a novel Bayesian phase II adaptive screening design to simultaneously select among possible treatment combinations involving multiple agents. Methods Our design is based on formulating the selection procedure as a Bayesian hypothesis testing problem in which the superiority of each treatment combination is equated to a single hypothesis. During the trial conduct, we use the current values of the posterior probabilities of all hypotheses to adaptively allocate patients to treatment combinations. Results Simulation studies show that the proposed design substantially outperforms the conventional multiarm balanced factorial trial design. The proposed design yields a significantly higher probability for selecting the best treatment while allocating substantially more patients to efficacious treatments. Limitations The proposed design is most appropriate for the trials combining multiple agents and screening out the efficacious combination to be further investigated. Conclusions The proposed Bayesian adaptive phase II screening design substantially outperformed the conventional complete factorial design. Our design allocates more patients to better treatments while providing higher power to identify the best treatment at the end of the trial. PMID:23359875

Physiological responses of lichens to factorial fumigations with nitric acid and ozone

Treesearch

J. Riddell; P.E. Padgett; T. Nash

2012-01-01

This paper addresses the effects of gaseous nitric acid (HNO3) and ozone (O3), two important air pollutants, on six lichen species with different morphological, ecological, and biological characteristics. The treatment chambers were set up in a factorial design consisting of control chambers, chambers fumigated with HNO

The Use of Factorial Forecasting to Predict Public Response

ERIC Educational Resources Information Center

Weiss, David J.

2012-01-01

Policies that call for members of the public to change their behavior fail if people don't change; predictions of whether the requisite changes will take place are needed prior to implementation. I propose to solve the prediction problem with Factorial Forecasting, a version of functional measurement methodology that employs group designs. Aspects…

Gearing up to the factory of the future

NASA Astrophysics Data System (ADS)

Godfrey, D. E.

1985-01-01

The features of factories and manufacturing techniques and tools of the near future are discussed. The spur to incorporate new technologies on the factory floor will originate in management, who must guide the interfacing of computer-enhanced equipment with traditional manpower, materials and machines. Electronic control with responsiveness and flexibility will be the key concept in an integrated approach to processing materials. Microprocessor controlled laser and fluid cutters add accuracy to cutting operations. Unattended operation will become feasible when automated inspection is added to a work station through developments in robot vision. Optimum shop management will be achieved through AI programming of parts manufacturing, optimized work flows, and cost accounting. The automation enhancements will allow designers to affect directly parts being produced on the factory floor.

Nitrogen fertilization effects on sorghum forage yield and quality

USDA-ARS?s Scientific Manuscript database

The study objective was to determine the effect of nitrogen fertilization on yield and quality of photoperiod sensitive (PS) and non-PS forage sorghum, sorghum-sudangrass, and sudangrass compared to corn. This study was a randomized complete block design with treatments arranged in a 4 x 8 factorial...

Animation-Based Learning in Geology: Impact of Animations Coupled with Seductive Details

ERIC Educational Resources Information Center

Clayton, Rodney L.

2016-01-01

Research is not clear on how to address the difficulty students have conceptualizing geologic processes and phenomena. This study investigated how animations coupled with seductive details effect learners' situational interest and emotions. A quantitative quasi-experimental study employing an independent-measures factorial design was used. The…

Attributing Responsibility for Child Maltreatment when Domestic Violence Is Present

ERIC Educational Resources Information Center

Landsman, Miriam J.; Hartley, Carolyn Copps

2007-01-01

Objective: The purpose of this study was to examine factors that influence how child welfare workers attribute responsibility for child maltreatment and child safety in cases involving domestic violence. Methods: The study used a factorial survey approach, combining elements of survey research with an experimental design. Case vignettes were…

Responses of southeast Alaska understory species to variation in light and simulated herbivory

Treesearch

Thomas A. Hanley; Jeffrey C. Barnard

2014-01-01

Responses to variation in light intensity, simulated herbivory by clipping, and their interaction were studied over three seasons in a factorial experimental design. Six major species of southeast Alaska forest understories were studied, each as a separate experiment: bunchberry, Cornus canadensis L.; threeleaf foamflower, Tiarella...

Optimization of thiamethoxam adsorption parameters using multi-walled carbon nanotubes by means of fractional factorial design.

PubMed

Panić, Sanja; Rakić, Dušan; Guzsvány, Valéria; Kiss, Erne; Boskovic, Goran; Kónya, Zoltán; Kukovecz, Ákos

2015-12-01

The aim of this work was to evaluate significant factors affecting the thiamethoxam adsorption efficiency using oxidized multi-walled carbon nanotubes (MWCNTs) as adsorbents. Five factors (initial solution concentration of thiamethoxam in water, temperature, solution pH, MWCNTs weight and contact time) were investigated using 2V(5-1) fractional factorial design. The obtained linear model was statistically tested using analysis of variance (ANOVA) and the analysis of residuals was used to investigate the model validity. It was observed that the factors and their second-order interactions affecting the thiamethoxam removal can be divided into three groups: very important, moderately important and insignificant ones. The initial solution concentration was found to be the most influencing parameter on thiamethoxam adsorption from water. Optimization of the factors levels was carried out by minimizing those parameters which are usually critical in real life: the temperature (energy), contact time (money) and weight of MWCNTs (potential health hazard), in order to maximize the adsorbed amount of the pollutant. The results of maximal adsorbed thiamethoxam amount in both real and optimized experiments indicate that among minimized parameters the adsorption time is one that makes the largest difference. The results of this study indicate that fractional factorial design is very useful tool for screening the higher number of parameters and reducing the number of adsorption experiments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Testing Nelder-Mead based repulsion algorithms for multiple roots of nonlinear systems via a two-level factorial design of experiments.

PubMed

Ramadas, Gisela C V; Rocha, Ana Maria A C; Fernandes, Edite M G P

2015-01-01

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

Factors that influence the tribocharging of pulverulent materials in compressed-air devices

NASA Astrophysics Data System (ADS)

Das, S.; Medles, K.; Mihalcioiu, A.; Beleca, R.; Dragan, C.; Dascalescu, L.

2008-12-01

Tribocharging of pulverulent materials in compressed-air devices is a typical multi-factorial process. This paper aims at demonstrating the interest of using the design of experiments methodology in association with virtual instrumentation for quantifying the effects of various process varaibles and of their interactions, as a prerequisite for the development of new tribocharging devices for industrial applications. The study is focused on the tribocharging of PVC powders in compressed-air devices similar to those employed in electrostatic painting. A classical 2 full-factorial design (3 factors at two levels) was employed for conducting the experiments. The response function was the charge/mass ratio of the material collected in a modified Faraday cage, at the exit of the tribocharging device. The charge/mass ratio was found to increase with the injection pressure and the vortex pressure in the tribocharging device, and to decrease with the increasing of the feed rate. In the present study an in-house design of experiments software was employed for statistical analysis of experimental data and validation of the experimental model.

Pupil Dilation and Object Permanence in Infants

ERIC Educational Resources Information Center

Sirois, Sylvain; Jackson, Iain R.

2012-01-01

This paper examines the relative merits of looking time and pupil diameter measures in the study of early cognitive abilities of infants. Ten-month-old infants took part in a modified version of the classic drawbridge experiment used to study object permanence (Baillargeon, Spelke, & Wasserman, 1985). The study involved a factorial design where…

Responsive copolymers for enhanced petroleum recovery. Quarterly technical progress report, June 23--September 21, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, C.; Hester, R.

Summaries are given on the technical progress on three tasks of this project. Monomer and polymer synthesis discusses the preparation of 1(7-aminoheptyloxymethyl)naphthalene and poly(maleic anhydride-alt-ethyl vinyl ether). Task 2, Characterization of molecular structure, discusses terpolymer solution preparation, UV analysis, fluorescence analysis, low angle laser light scattering, and viscometry. The paper discusses the effects of hydrophobic groups, the effect of pH, the effect of electrolyte addition, and photophysical studies. Task 3, Solution properties, describes the factorial experimental design for characterizing polymer solutions by light scattering, the light scattering test model, orthogonal factorial test design, linear regression in coded space, confidence levelmore » for coded space test mode coefficients, coefficients of the real space test model, and surface analysis of the model equations.« less

Statistical validation and an empirical model of hydrogen production enhancement found by utilizing passive flow disturbance in the steam-reformation process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, Paul A.; Liao, Chang-hsien

2007-11-15

A passive flow disturbance has been proven to enhance the conversion of fuel in a methanol-steam reformer. This study presents a statistical validation of the experiment based on a standard 2{sup k} factorial experiment design and the resulting empirical model of the enhanced hydrogen producing process. A factorial experiment design was used to statistically analyze the effects and interactions of various input factors in the experiment. Three input factors, including the number of flow disturbers, catalyst size, and reactant flow rate were investigated for their effects on the fuel conversion in the steam-reformation process. Based on the experimental results, anmore » empirical model was developed and further evaluated with an uncertainty analysis and interior point data. (author)« less

Quantum computation with realistic magic-state factories

NASA Astrophysics Data System (ADS)

O'Gorman, Joe; Campbell, Earl T.

2017-03-01

Leading approaches to fault-tolerant quantum computation dedicate a significant portion of the hardware to computational factories that churn out high-fidelity ancillas called magic states. Consequently, efficient and realistic factory design is of paramount importance. Here we present the most detailed resource assessment to date of magic-state factories within a surface code quantum computer, along the way introducing a number of techniques. We show that the block codes of Bravyi and Haah [Phys. Rev. A 86, 052329 (2012), 10.1103/PhysRevA.86.052329] have been systematically undervalued; we track correlated errors both numerically and analytically, providing fidelity estimates without appeal to the union bound. We also introduce a subsystem code realization of these protocols with constant time and low ancilla cost. Additionally, we confirm that magic-state factories have space-time costs that scale as a constant factor of surface code costs. We find that the magic-state factory required for postclassical factoring can be as small as 6.3 million data qubits, ignoring ancilla qubits, assuming 10-4 error gates and the availability of long-range interactions.

Design and evaluation of high strength concrete for girders : final report.

DOT National Transportation Integrated Search

1980-05-01

The scope of the study was to make concrete mixes in the laboratory using a partial factorial, with three cement contents, two coarse aggregates and three fine-to-coarse aggregate ratios. The mixes showing the best properties and highest compressive ...

More ethical and more efficient clinical research: multiplex trial design.

PubMed

Keus, Frederik; van der Horst, Iwan C C; Nijsten, Maarten W

2014-08-14

Today's clinical research faces challenges such as a lack of clinical equipoise between treatment arms, reluctance in randomizing for multiple treatments simultaneously, inability to address interactions and increasingly restricted resources. Furthermore, many trials are biased by extensive exclusion criteria, relatively small sample size and less appropriate outcome measures. We propose a 'Multiplex' trial design that preserves clinical equipoise with a continuous and factorial trial design that will also result in more efficient use of resources. This multiplex design accommodates subtrials with appropriate choice of treatment arms within each subtrial. Clinical equipoise should increase consent rates while the factorial design is the best way to identify interactions. The multiplex design may evolve naturally from today's research limitations and challenges, while principal objections seem absent. However this new design poses important infrastructural, organisational and psychological challenges that need in depth consideration.

Improving the Reading Ability of Science Students through Study Groups and Multiple Intelligences

ERIC Educational Resources Information Center

Owolabi, Tunde; Okebukola, Foluso

2009-01-01

This study explored the effects of appropriate pedagogical skills (study groups and multiple intelligences) on students' efficiencies in reading skills. It employed a factorial design using three variables. A sample of 90 science students choosing from three intact classes were involved in the study. Data analyses were carried out using mean,…

Quantifying second generation ethanol inhibition: Design of Experiments approach and kinetic model development.

PubMed

Schneiderman, Steven J; Johnson, Roger W; Menkhaus, Todd J; Gilcrease, Patrick C

2015-03-01

While softwoods represent a potential feedstock for second generation ethanol production, compounds present in their hydrolysates can inhibit fermentation. In this study, a novel Design of Experiments (DoE) approach was used to identify significant inhibitory effects on Saccharomyces cerevisiae D5A for the purpose of guiding kinetic model development. Although acetic acid, furfural and 5-hydroxymethyl furfural (HMF) were present at potentially inhibitory levels, initial factorial experiments only identified ethanol as a significant rate inhibitor. It was hypothesized that high ethanol levels masked the effects of other inhibitors, and a subsequent factorial design without ethanol found significant effects for all other compounds. When these non-ethanol effects were accounted for in the kinetic model, R¯(2) was significantly improved over an ethanol-inhibition only model (R¯(2)=0.80 vs. 0.76). In conclusion, when ethanol masking effects are removed, DoE is a valuable tool to identify significant non-ethanol inhibitors and guide kinetic model development. Copyright © 2014 Elsevier Ltd. All rights reserved.

Young Tanzanians and the Cinema: A Study of the Effects of Selected Basic Motion Picture Elements and Population Characteristics on Filmic Comprehension of Tanzanian Adolescent Primary School Children.

ERIC Educational Resources Information Center

Giltrow, David Roger

A study was conducted of Tanzanian adolescent school children's responses to filmic elements. The design included a very large sample in a complicated factorial design, varying such factors as color, type of action, background and sound of the film, and the demographic characteristics of the subjects. Results showed that of these variables,…

Proposed variations of the stepped-wedge design can be used to accommodate multiple interventions

PubMed Central

Lyons, Vivian H; Li, Lingyu; Hughes, James P; Rowhani-Rahbar, Ali

2018-01-01

Objective Stepped wedge design (SWD) cluster randomized trials have traditionally been used for evaluating a single intervention. We aimed to explore design variants suitable for evaluating multiple interventions in a SWD trial. Study Design and Setting We identified four specific variants of the traditional SWD that would allow two interventions to be conducted within a single cluster randomized trial: Concurrent, Replacement, Supplementation and Factorial SWDs. These variants were chosen to flexibly accommodate study characteristics that limit a one-size-fits-all approach for multiple interventions. Results In the Concurrent SWD, each cluster receives only one intervention, unlike the other variants. The Replacement SWD supports two interventions that will not or cannot be employed at the same time. The Supplementation SWD is appropriate when the second intervention requires the presence of the first intervention, and the Factorial SWD supports the evaluation of intervention interactions. The precision for estimating intervention effects varies across the four variants. Conclusion Selection of the appropriate design variant should be driven by the research question while considering the trade-off between the number of steps, number of clusters, restrictions for concurrent implementation of the interventions, lingering effects of each intervention, and precision of the intervention effect estimates. PMID:28412466

Assessing the influence of reactor system design criteria on the performance of model colon fermentation units.

PubMed

Moorthy, Arun S; Eberl, Hermann J

2014-04-01

Fermentation reactor systems are a key platform in studying intestinal microflora, specifically with respect to questions surrounding the effects of diet. In this study, we develop computational representations of colon fermentation reactor systems as a way to assess the influence of three design elements (number of reactors, emptying mechanism, and inclusion of microbial immobilization) on three performance measures (total biomass density, biomass composition, and fibre digestion efficiency) using a fractional-factorial experimental design. It was determined that the choice of emptying mechanism showed no effect on any of the performance measures. Additionally, it was determined that none of the design criteria had any measurable effect on reactor performance with respect to biomass composition. It is recommended that model fermentation systems used in the experimenting of dietary effects on intestinal biomass composition be streamlined to only include necessary system design complexities, as the measured performance is not benefited by the addition of microbial immobilization mechanisms or semi-continuous emptying scheme. Additionally, the added complexities significantly increase computational time during simulation experiments. It was also noted that the same factorial experiment could be directly adapted using in vitro colon fermentation systems. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Formulation and evaluation of floating tablet of H2-receptor antagonist.

PubMed

Kesarla, Rajesh S; Vora, Pratik Ashwinbhai; Sridhar, B K; Patel, Gunvant; Omri, Abdelwahab

2015-01-01

Conventional sustained dosage form of ranitidine hydrochloride (HCl) does not prevent frequent administration due to its degradation in colonic media and limited absorption in the upper part of GIT. Ranitidine HCl floating tablet was formulated with sublimation method to overcome the stated problem. Compatibility study for screening potential excipients was carried out using Fourier transform infrared spectroscopy (FT-IR) and differential scanning chromatography (DSC). Selected excipients were further evaluated for optimizing the formulation. Preliminary screening of binder, polymer and sublimating material was based on hardness and drug release, drug release with release kinetics and floating lag time with total floatation time, respectively. Selected excipients were subjected to 3(2) factorial design with polymer and sublimating material as independent factors. Matrix tablets were obtained by using 16/32" flat-faced beveled edges punches followed by sublimation. FT-IR and DSC indicated no significant incompatibility with selected excipients. Klucel-LF, POLYOX WSR N 60 K and l-menthol were selected as binder, polymer and sublimating material, respectively, for factorial design batches after preliminary screening. From the factorial design batches, optimum concentration to release the drug within 12 h was found to be 420 mg of POLYOX and 40 mg of l-menthol. Stability studies indicated the formulation as stable. Ranitidine HCl matrix floating tablets were formulated to release 90% of drug in stomach within 12 h. Hence, release of the drug could be sustained within narrow absorption site. Moreover, the dosage form was found to be floating within a fraction of second independent of the pH of media ensuring a robust formulation.

Formulation optimization of gentamicin loaded Eudragit RS100 microspheres using factorial design study.

PubMed

Singh, Deependra; Saraf, Swarnlata; Dixit, Vinod Kumar; Saraf, Shailendra

2008-04-01

Gentamicin-Eudragit RS100 microspheres were prepared by modified double emulsion method. A 3(2) full factorial experiment was designed to study the effects of the composition of outer aqueous phase in terms of amount of glycerol (viscosity effect) and sodium chloride (osmotic pressure gradient effect) on the entrapment efficiency and % yield and microsphere size. The results of analysis of variance test for responses measured indicated that the test is significant (p>0.05). The contribution of sodium chloride concentration was found to be higher on entrapment efficiency and % yield, whereas glycerol produced significant effect on the mean diameter of microspheres. Microspheres demonstrated spherical particles in the size range of 33.24-60.43 microm. In vitro release profile of optimized formulation demonstrated sustained release for 24 h following Higuchi kinetics. Finally, drug bioactivity was found to remain intact after microencapsulation. Response surface graphs are presented to examine the effects of independent variables on the responses studied. Thus, by formulation design important parameters affecting formulation characteristics of gentamicin loaded Eudragit RS100 microspheres can be identified for controlled delivery with desirable characters in terms of maximum entrapment and yield.

Recent progress in neutrino factory and muon collider research within the Muon Collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. M. Alsharoa; Charles M. Ankenbrandt; Muzaffer Atac

2003-08-01

We describe the status of our effort to realize a first neutrino factory and the progress made in understanding the problems associated with the collection and cooling of muons towards that end. We summarize the physics that can be done with neutrino factories as well as with intense cold beams of muons. The physics potential of muon colliders is reviewed, both as Higgs Factories and compact high energy lepton colliders. The status and timescale of our research and development effort is reviewed as well as the latest designs in cooling channels including the promise of ring coolers in achieving longitudinalmore » and transverse cooling simultaneously. We detail the efforts being made to mount an international cooling experiment to demonstrate the ionization cooling of muons.« less

Effect of fescue toxicosis on whole body energy and nitrogen balance, in situ degradation and ruminal passage rates in Holstein steers

USDA-ARS?s Scientific Manuscript database

This study was designed to examine alteration of ruminal kinetics, as well as N and energy balance during fescue toxicosis. Six ruminally cannulated Holstein steers (BW=217 ±7 kg) were weight-matched into pairs and pair-fed throughout a cross-over design experiment with a 2x2 factorial treatment str...

The Effectiveness of Worked Examples Associated with Presentation Format and Prior Knowledge: A Web-Based Experiment

ERIC Educational Resources Information Center

Hsiao, E-Ling

2010-01-01

The aim of this study is to explore whether presentation format and prior knowledge affect the effectiveness of worked examples. The experiment was conducted through a specially designed online instrument. A 2X2X3 factorial before-and-after design was conducted. Three-way ANOVA was employed for data analysis. The result showed first, that prior…

The Bourgeoisie Dream Factory: Teaching Marx's Theory of Alienation through an Experiential Activity

ERIC Educational Resources Information Center

Windsor, Elroi J.; Carroll, Alana M.

2015-01-01

Effectively teaching sociological theories to undergraduate students is challenging. Students often enroll in theory courses due to major requirements, not personal interest. Consequently, many students approach the study of theory with anxiety. This study examined the effectiveness of an experiential learning activity designed to teach Karl…

Supplemental dietary L-arginine attenuates intestinal mucosal disruption during a coccidial vaccine challenge in broiler chickens

USDA-ARS?s Scientific Manuscript database

The present study investigated the effects of dietary arginine (Arg) supplementation on intestinal barrier integrity in broiler chickens undergoing coccidial challenge. The design of this study was a randomized complete block employing a 3 x 2 factorial arrangement (n = 8) with 3 level of Arg (1.11,...

A Factorial Design Approach to Analyse the Effect of Coarse Recycled Concrete Aggregates on the Properties of Hot Mix Asphalt

NASA Astrophysics Data System (ADS)

Tanty, Kiranbala; Mukharjee, Bibhuti Bhusan; Das, Sudhanshu Shekhar

2018-06-01

The present study investigates the effect of replacement of coarse fraction of natural aggregates by recycled concrete aggregates on the properties of hot mix asphalt (HMA) using general factorial design approach. For this two factors i.e. recycled coarse aggregates percentage [RCA (%)] and bitumen content percentage [BC (%)] are considered. Tests have been carried out on the HMA type bituminous concrete, prepared with varying RCA (%) and BC (%). Analysis of variance has been performed on the experimental data to determine the effect of the chosen factors on various parameters such as stability, flow, air void, void mineral aggregate, void filled with bitumen and bulk density. The study depicts that RCA (%) and BC (%) have significant effect on the selected responses as p value is less than the chosen significance level. In addition to above, the outcomes of the statistical analysis indicate that interaction between factors have significant effects on void mineral aggregate and bulk density of bituminous concrete.

A Factorial Design Approach to Analyse the Effect of Coarse Recycled Concrete Aggregates on the Properties of Hot Mix Asphalt

NASA Astrophysics Data System (ADS)

Tanty, Kiranbala; Mukharjee, Bibhuti Bhusan; Das, Sudhanshu Shekhar

2018-02-01

The present study investigates the effect of replacement of coarse fraction of natural aggregates by recycled concrete aggregates on the properties of hot mix asphalt (HMA) using general factorial design approach. For this two factors i.e. recycled coarse aggregates percentage [RCA (%)] and bitumen content percentage [BC (%)] are considered. Tests have been carried out on the HMA type bituminous concrete, prepared with varying RCA (%) and BC (%). Analysis of variance has been performed on the experimental data to determine the effect of the chosen factors on various parameters such as stability, flow, air void, void mineral aggregate, void filled with bitumen and bulk density. The study depicts that RCA (%) and BC (%) have significant effect on the selected responses as p value is less than the chosen significance level. In addition to above, the outcomes of the statistical analysis indicate that interaction between factors have significant effects on void mineral aggregate and bulk density of bituminous concrete.

Psychological need thwarting in the sport context: assessing the darker side of athletic experience.

PubMed

Bartholomew, Kimberley J; Ntoumanis, Nikos; Ryan, Richard M; Thøgersen-Ntoumani, Cecilie

2011-02-01

Research in self-determination theory (Ryan & Deci, 2002) has shown that satisfaction of autonomy, competence, and relatedness needs in sport contexts is associated with enhanced engagement, performance, and well-being. This article outlines the initial development of a multidimensional measure designed to assess psychological need thwarting, an under-studied area of conceptual and practical importance. Study 1 generated a pool of items designed to tap the negative experiential state that occurs when athletes perceive their needs for autonomy, competence, and relatedness to be actively undermined. Study 2 tested the factorial structure of the questionnaire using confirmatory factor analysis. The supported model comprised 3 factors, which represented the hypothesized interrelated dimensions of need thwarting. The model was refined and cross-validated using an independent sample in Study 3. Overall, the psychological need thwarting scale (PNTS) demonstrated good content, factorial, and predictive validity, as well as internal consistency and invariance across gender, sport type, competitive level, and competitive experience. The conceptualization of psychological need thwarting is discussed, and suggestions are made regarding the use of the PNTS in research pertaining to the darker side of sport participation.

Exposure to movie smoking, antismoking ads and smoking intensity: an experimental study with a factorial design.

PubMed

Harakeh, Zeena; Engels, Rutger C M E; Vohs, Kathleen; van Baaren, Rick B; Sargent, James

2010-06-01

This study examines whether smoking portrayal in movies or antismoking advertisements affect smoking intensity among young adults. We conducted an experimental study in which 84 smokers were randomly assigned using a two (no-smoking versus smoking portrayal in the movie) by three (two prosocial ads, two antismoking ads or one of each) factorial design. Participants viewed a 60-minute movie with two commercial breaks and afterwards completed a questionnaire. Smoking during the session was allowed and observed. Exposure to the movie with smoking had no effect on smoking intensity. Those who viewed two antismoking ads had significantly lower smoking intensity compared with those who viewed two prosocial ads. There was no interaction between movie smoking and antismoking ads. Baseline CO (carbon monoxide) level had the largest effect on smoking intensity. These findings provide further evidence to support antismoking ads placed with movies because of their possible effect on young adult smoking behaviour. However, caution is warranted, because nicotine dependence appears to be the primary predictor of smoking intensity among young adult smokers in this study.

Exposure to movie smoking, antismoking ads and smoking intensity: an experimental study with a factorial design

PubMed Central

Harakeh, Zeena; Engels, Rutger C M E; Vohs, Kathleen; van Baaren, Rick B; Sargent, James

2013-01-01

Background This study examines whether smoking portrayal in movies or antismoking advertisements affect smoking intensity among young adults. Methods We conducted an experimental study in which 84 smokers were randomly assigned using a two (no-smoking versus smoking portrayal in the movie) by three (two prosocial ads, two antismoking ads or one of each) factorial design. Participants viewed a 60-minute movie with two commercial breaks and afterwards completed a questionnaire. Smoking during the session was allowed and observed. Results Exposure to the movie with smoking had no effect on smoking intensity. Those who viewed two antismoking ads had significantly lower smoking intensity compared with those who viewed two prosocial ads. There was no interaction between movie smoking and antismoking ads. Baseline CO (carbon monoxide) level had the largest effect on smoking intensity. Conclusion These findings provide further evidence to support antismoking ads placed with movies because of their possible effect on young adult smoking behaviour. However, caution is warranted, because nicotine dependence appears to be the primary predictor of smoking intensity among young adult smokers in this study. PMID:20008155

ISS/IDS Detector Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cervera-Villanueva, A.

2008-02-21

This article summarises the results obtained by the detector working group of the 'International Scooping Study' (ISS) of a future neutrino oscillations facility. Special emphasis is put on far detectors, for which some of the main issues are identified. A detector R and D strategy in the context of the 'International Design Study' (IDS) for a neutrino factory is also presented.

THE EXPERIMENTAL DESIGN FOR BeO IRAADIATION EXPERIMENTS ORNL 41-8 AND ORNL 41-9

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardiner, D.A.

1962-07-18

The experimental plan for irradiating BeO pellets in Experiments ORNL 41- 8 and ORNL 41-9 was chosen in accordance with the principles of experimental design. The design is known by statisticians as a 2/sup 5/ factorial experiment confound'' in six replications. Five variables---size, density, grain size, temperature and time--are controlled at two levels to form the basic 2i factorial experiment. The sixth variable, neutron flux, is introduced by confounding on higher-order interactions. An explanation is presented in nontechnical language the means by which the aims of the experimenters and the physical conditions affecting the experiment were utilized in constructing themore » experimental design. (auth)« less

Proceedings of the Conference on the Design of Experiments in Army Research Development and Testing (28th) Held at Monterey, California on 20-22 October 1982

DTIC Science & Technology

1983-06-01

program specifically designed to solve IME equations. The IME measure is a useful index because it translates system performance characteristics of...8.0 SUMMARY The purpose of this study was to design the field evaluation of a camou- flage system in such a manner that the camoufleur could...analysis of complex factorial designs and their associated systems of confounding ((44), [46)) and to the introduction of incomplete block designs . My

Assessing Orchestrated Simulation Through Modeling to Quantify the Benefits of Unmanned-Teaming in a Tactical ASW Scenario

DTIC Science & Technology

2018-03-01

Results are compared to a previous study using a similar design of experiments but different simulation software. The baseline scenario for exploring the...behaviors are mimicked in this research, enabling Solem’s MANA results to be compared to our LITMUS’ results. By design , the principal difference...missions when using the second order NOLH, and compares favorably with the over six million in the full factorial design . 3. Advantages of Cluster

Status of the nuSTORM Facility and a Possible Extension for Long-Baseline $$\

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bross, Alan D.; Liu, Ao; Lagrange, Jean-Baptiste

2015-11-03

Neutrino beams produced from the decay of muons in a racetrack-like decay ring (the so called Neutrino Factory) provide a powerful way to study neutrino oscillation physics and, in addition, provide unique beams for neutrino interaction studies. The Neutrinos from STORed Muons (nuSTORM) facility uses a neutrino factory-like design. Due to the particular nature of nuSTORM, it can also provide an intense, very pure, muon neutrino beam from pion decay. This so-called “Neo-conventional" muon neutrino beam from nuSTORM makes nuSTORM a hybrid neutrino factory. In this paper we describe the facility and give a detailed description of the neutrino beammore » fluxes that are available and the precision to which these fluxes can be determined. We then present sensitivity plots that indicated how well the facility can perform for short-baseline oscillation searches and show its potential for a neutrino interaction physics program. Finally, we comment on the performance potential of the "Neo-conventional" muon neutrino beam optimized for long- baseline neutrino-oscillation physics.« less

Overview of the Neutrinos from Stored Muons Facility - nuSTORM

DOE PAGES

Adey, D.; Appleby, R. B.; Bayes, R.; ...

2017-07-19

Neutrino beams produced from the decay of muons in a racetrack-like decay ring (the so called Neutrino Factory) provide a powerful way to study neutrino oscillation physics and, in addition, provide unique beams for neutrino interaction studies. The Neutrinos from STORed Muons (nuSTORM) facility uses a neutrino factory-like design. Due to the particular nature of nuSTORM, it can also provide an intense, very pure, muon neutrino beam from pion decay. This so-called 'Neo-conventional' muon-neutrino beam from nuSTORM makes nuSTORM a hybrid neutrino factory. Here in this paper we describe the facility and give a detailed description of the neutrino beamsmore » that are available and the precision to which they can be characterized. We then show its potential for a neutrino interaction physics program and present sensitivity plots that indicate how well the facility can perform for short-baseline oscillation searches. Lastly, we comment on the performance potential of a 'Neo-conventional' muon neutrino beam optimized for long-baseline neutrino-oscillation physics.« less

Assessing factorial invariance of two-way rating designs using three-way methods

PubMed Central

Kroonenberg, Pieter M.

2015-01-01

Assessing the factorial invariance of two-way rating designs such as ratings of concepts on several scales by different groups can be carried out with three-way models such as the Parafac and Tucker models. By their definitions these models are double-metric factorially invariant. The differences between these models lie in their handling of the links between the concept and scale spaces. These links may consist of unrestricted linking (Tucker2 model), invariant component covariances but variable variances per group and per component (Parafac model), zero covariances and variances different per group but not per component (Replicated Tucker3 model) and strict invariance (Component analysis on the average matrix). This hierarchy of invariant models, and the procedures by which to evaluate the models against each other, is illustrated in some detail with an international data set from attachment theory. PMID:25620936

Adapting Evaluations of Alternative Payment Models to a Changing Environment.

PubMed

Grannemann, Thomas W; Brown, Randall S

2018-04-01

To identify the most robust methods for evaluating alternative payment models (APMs) in the emerging health care delivery system environment. We assess the impact of widespread testing of alternative payment models on the ability to find credible comparison groups. We consider the applicability of factorial research designs for assessing the effects of these models. The widespread adoption of alternative payment models could effectively eliminate the possibility of comparing APM results with a "pure" control or comparison group unaffected by other interventions. In this new environment, factorial experiments have distinct advantages over the single-model experimental or quasi-experimental designs that have been the mainstay of recent tests of Medicare payment and delivery models. The best prospects for producing definitive evidence of the effects of payment incentives for APMs include fractional factorial experiments that systematically vary requirements and payment provisions within a payment model. © Health Research and Educational Trust.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogacz, Alex

We summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory and extendable to Higgs Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival for the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to an initially low RF frequency, e.g., 325 MHz, which is then increased to 650more » MHz as the transverse size shrinks with increasing energy. High-gradient normal conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. We consider an SRF-efficient design based on a multi-pass (4.5) ?dogbone? RLA, extendable to multi-pass FFAG-like arcs.« less

Cost effectiveness of ergonomic redesign of electronic motherboard.

PubMed

Sen, Rabindra Nath; Yeow, Paul H P

2003-09-01

A case study to illustrate the cost effectiveness of ergonomic redesign of electronic motherboard was presented. The factory was running at a loss due to the high costs of rejects and poor quality and productivity. Subjective assessments and direct observations were made on the factory. Investigation revealed that due to motherboard design errors, the machine had difficulty in placing integrated circuits onto the pads, the operators had much difficulty in manual soldering certain components and much unproductive manual cleaning (MC) was required. Consequently, there were high rejects and occupational health and safety (OHS) problems, such as, boredom and work discomfort. Also, much labour and machine costs were spent on repairs. The motherboard was redesigned to correct the design errors, to allow more components to be machine soldered and to reduce MC. This eliminated rejects, reduced repairs, saved US dollars 581495/year and improved operators' OHS. The customer also saved US dollars 142105/year on loss of business.

Factorial Design Approach in Proportioning Prestressed Self-Compacting Concrete.

PubMed

Long, Wu-Jian; Khayat, Kamal Henri; Lemieux, Guillaume; Xing, Feng; Wang, Wei-Lun

2015-03-13

In order to model the effect of mixture parameters and material properties on the hardened properties of, prestressed self-compacting concrete (SCC), and also to investigate the extensions of the statistical models, a factorial design was employed to identify the relative significance of these primary parameters and their interactions in terms of the mechanical and visco-elastic properties of SCC. In addition to the 16 fractional factorial mixtures evaluated in the modeled region of -1 to +1, eight axial mixtures were prepared at extreme values of -2 and +2 with the other variables maintained at the central points. Four replicate central mixtures were also evaluated. The effects of five mixture parameters, including binder type, binder content, dosage of viscosity-modifying admixture (VMA), water-cementitious material ratio (w/cm), and sand-to-total aggregate ratio (S/A) on compressive strength, modulus of elasticity, as well as autogenous and drying shrinkage are discussed. The applications of the models to better understand trade-offs between mixture parameters and carry out comparisons among various responses are also highlighted. A logical design approach would be to use the existing model to predict the optimal design, and then run selected tests to quantify the influence of the new binder on the model.

DKIST enclosure modeling and verification during factory assembly and testing

NASA Astrophysics Data System (ADS)

Larrakoetxea, Ibon; McBride, William; Marshall, Heather K.; Murga, Gaizka

2014-08-01

The Daniel K. Inouye Solar Telescope (DKIST, formerly the Advanced Technology Solar Telescope, ATST) is unique as, apart from protecting the telescope and its instrumentation from the weather, it holds the entrance aperture stop and is required to position it with millimeter-level accuracy. The compliance of the Enclosure design with the requirements, as of Final Design Review in January 2012, was supported by mathematical models and other analyses which included structural and mechanical analyses (FEA), control models, ventilation analysis (CFD), thermal models, reliability analysis, etc. During the Enclosure Factory Assembly and Testing the compliance with the requirements has been verified using the real hardware and the models created during the design phase have been revisited. The tests performed during shutter mechanism subsystem (crawler test stand) functional and endurance testing (completed summer 2013) and two comprehensive system-level factory acceptance testing campaigns (FAT#1 in December 2013 and FAT#2 in March 2014) included functional and performance tests on all mechanisms, off-normal mode tests, mechanism wobble tests, creation of the Enclosure pointing map, control system tests, and vibration tests. The comparison of the assumptions used during the design phase with the properties measured during the test campaign provides an interesting reference for future projects.

Optimizing the vacuum plasma spray deposition of metal, ceramic, and cermet coatings using designed experiments

NASA Astrophysics Data System (ADS)

Kingswell, R.; Scott, K. T.; Wassell, L. L.

1993-06-01

The vacuum plasma spray (VPS) deposition of metal, ceramic, and cermet coatings has been investigated using designed statistical experiments. Processing conditions that were considered likely to have a significant influence on the melting characteristics of the precursor powders and hence deposition efficiency were incorporated into full and fractional factorial experimental designs. The processing of an alumina powder was very sensitive to variations in the deposition conditions, particularly the injection velocity of the powder into the plasma flame, the plasma gas composition, and the power supplied to the gun. Using a combination of full and fractional factorial experimental designs, it was possible to rapidly identify the important spraying variables and adjust these to produce a deposition efficiency approaching 80 percent. The deposition of a nickel-base alloy metal powder was less sensitive to processing conditions. Generally, however, a high degree of particle melting was achieved for a wide range of spray conditions. Preliminary experiments performed using a tungsten carbide/cobalt cermet powder indicated that spray efficiency was not sensitive to deposition conditions. However, microstructural analysis revealed considerable variations in the degree of tungsten carbide dissolution. The structure and properties of the optimized coatings produced in the factorial experiments are also discussed.

Development and Validation of HPLC-DAD and UHPLC-DAD Methods for the Simultaneous Determination of Guanylhydrazone Derivatives Employing a Factorial Design.

PubMed

Azevedo de Brito, Wanessa; Gomes Dantas, Monique; Andrade Nogueira, Fernando Henrique; Ferreira da Silva-Júnior, Edeildo; Xavier de Araújo-Júnior, João; Aquino, Thiago Mendonça de; Adélia Nogueira Ribeiro, Êurica; da Silva Solon, Lilian Grace; Soares Aragão, Cícero Flávio; Barreto Gomes, Ana Paula

2017-08-30

Guanylhydrazones are molecules with great pharmacological potential in various therapeutic areas, including antitumoral activity. Factorial design is an excellent tool in the optimization of a chromatographic method, because it is possible quickly change factors such as temperature, mobile phase composition, mobile phase pH, column length, among others to establish the optimal conditions of analysis. The aim of the present work was to develop and validate a HPLC and UHPLC methods for the simultaneous determination of guanylhydrazones with anticancer activity employing experimental design. Precise, exact, linear and robust HPLC and UHPLC methods were developed and validated for the simultaneous quantification of the guanylhydrazones LQM10, LQM14, and LQM17. The UHPLC method was more economic, with a four times less solvent consumption, and 20 times less injection volume, what allowed better column performance. Comparing the empirical approach employed in the HPLC method development to the DoE approach employed in the UHPLC method development, we can conclude that the factorial design made the method development faster, more practical and rational. This resulted in methods that can be employed in the analysis, evaluation and quality control of these new synthetic guanylhydrazones.

Testing Factorial Invariance in Multilevel Data: A Monte Carlo Study

ERIC Educational Resources Information Center

Kim, Eun Sook; Kwok, Oi-man; Yoon, Myeongsun

2012-01-01

Testing factorial invariance has recently gained more attention in different social science disciplines. Nevertheless, when examining factorial invariance, it is generally assumed that the observations are independent of each other, which might not be always true. In this study, we examined the impact of testing factorial invariance in multilevel…

A new efficient mixture screening design for optimization of media.

PubMed

Rispoli, Fred; Shah, Vishal

2009-01-01

Screening ingredients for the optimization of media is an important first step to reduce the many potential ingredients down to the vital few components. In this study, we propose a new method of screening for mixture experiments called the centroid screening design. Comparison of the proposed design with Plackett-Burman, fractional factorial, simplex lattice design, and modified mixture design shows that the centroid screening design is the most efficient of all the designs in terms of the small number of experimental runs needed and for detecting high-order interaction among ingredients. (c) 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009.

The Factorial Validity of The Maslach Burnout Inventory--General Survey in Representative Samples of Eight Different Occupational Groups

ERIC Educational Resources Information Center

Langballe, Ellen Melbye; Falkum, Erik; Innstrand, Siw Tone; Aasland, Olaf Gjerlow

2006-01-01

The Maslach Burnout Inventory--General Survey (MBI-GS) is designed to measure the three subdimensions (exhaustion, cynicism, and professional efficacy) of burnout in a wide range of occupations. This article examines the factorial validity of the MBI-GS across eight different occupational groups in Norway: lawyers, physicians, nurses, teachers,…

The National Shipbuilding Research Program, Computer Aided Process Planning for Shipyards

DTIC Science & Technology

1986-08-01

Factory Simulation with Conventional Factory Planning Techniques Financial Justification of State-of-the-Art Investment: A Study Using CAPP I–5 T I T L...and engineer to order.” “Factory Simulation: Approach to Integration of Computer- Based Factory Simulation with Conventional Factory Planning Techniques

The role of psychosocial and physical work-related factors on the health-related quality of life of Iranian industrial workers.

PubMed

Mokarami, Hamidreza; Stallones, Lorann; Nazifi, Morteza; Taghavi, Sayed Mohammad

2016-10-17

The role of psychosocial and physical work factors in predicting health related quality of life (HRQOL) has not been investigated among Iranian industrial workers. The present study is designed to assess these relationships among Iranian workers from steel and cosmetic factories. A cross-sectional study was conducted among 280 workers from two factories. Psychosocial and physical work factors and HRQOL were measured by the Persian translations of the following questionnaires: Job Content Questionnaire (JCQ) and the World Health Organization Quality of Life-Brief (WHOQOL-Brief). An instrument was developed to assess socio-demographic, health, and other work-related factors. The data were analyzed using independent t-tests, Pearson product moment correlation and hierarchical multiple regression. Results revealed that the respondents generally had poor HRQOLs especially in the environmental domain. The steel factory workers who were exposed to higher levels of occupational risk factors suffered from poorer HRQOL compared to the cosmetic factory workers. The results of hierarchical regression for all participants revealed that social support, sleep quality, work schedule, smoking and exercise were significant predictors of all domains of HRQOL. To improve the worker's HRQOL, intervention programs should focus on promoting social support, sleep quality, exercise and smoking habits. Moreover, reducing hazardous work environments should be considered an important intervention to promote HRQOL.

Factors affecting the incidence of first-quality wheels of Trentingrana cheese.

PubMed

Bittante, G; Cecchinato, A; Cologna, N; Penasa, M; Tiezzi, F; De Marchi, M

2011-07-01

Trentingrana (or Grana Trentino) is a Protected Designation of Origin hard cheese produced in the eastern Italian Alps by small cooperative dairy factories. To obtain the certification of quality, wheels are evaluated at 9±1 mo of ripening and those classified as first quality are revaluated at 18±1 mo. Traditionally, the assessment is based on 2 sensory features: namely, the external aspect of the wheel and the internal texture; the latter is evaluated through the sound produced by beating the wheel with a special hammer. Traits considered in the study were the percentage of first-quality wheels of total wheels examined at 9±1 (QW(9 mo)) and 18±1 (QW(18 mo)) mo of ripening, and their combination [i.e., the percentage of first-quality wheels at 18±1 mo of ripening of the number of wheels evaluated at 9±1 mo (QW(tot))]. The experimental unit was the batch of 2 mo of production of each of 10 cooperative dairy factories from 2002 to 2008. Data were analyzed with a model that included fixed effects of dairy factory, year and season of production, and interactions between dairy factory and year, and dairy factory and season. The coefficients of determination of the models were 0.57, 0.68, and 0.67 for QW(9mo), QW(18 mo), and QW(tot), respectively. All factors significantly influenced the traits, with dairy factory being the most important source of variation, followed by season and year of production. Remarkable differences were found between the best and the worst dairy factory for QW(9 mo) (11.5%), QW(18 mo) (21.1%), and QW(tot) (25.6%). The first 4 yr of production had a negative effect on the percentage of wheels labeled as first quality and QW(tot) decreased from 74 to 64%; nevertheless, a complete recovery was detected in the following years. The season of production strongly influenced the studied traits with the best results in spring and summer, and the worst in autumn and winter. Compared with average, the 3 best dairy factories were smaller, with smaller associated farms, and showed lower variation across years and seasons of production. Results support the relevance of routinely assessing and monitoring the quality of Trentingrana cheese. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Study of the effect of temperature, irradiance and salinity on growth and yessotoxin production by the dinoflagellate Protoceratium reticulatum in culture by using a kinetic and factorial approach.

PubMed

Paz, Beatriz; Vázquez, José A; Riobó, Pilar; Franco, José M

2006-10-01

A complete first order orthogonal plan was used to optimize the growth and the production of yessotoxin (YTX) by the dinoflagellate Protoceratium reticulatum in culture by controlling salinity, temperature and irradiance. Initially, an approach to the kinetic data of cellular density and YTX production for each one of the experimental design conditions was performed. The P. reticulatum growth and YTX production were fitted to logistical equations and to a first-order kinetic model, respectively. The parameters obtained from this adjustment were used as dependent variables for the formulation of the empirical equations of the factorial design tested. The results showed that in practically all the cases for both, P. reticulatum growth and YTX production, irradiance is the primary independent variable and has a positive effect in the range 50-90 micromol photons m(-2) s(-1). Additionally, in certain specific cases, temperature reveals significant positive effects when maintained between 15 and 23 degrees C and salinity in the range of 20-34 displays negative effects. Despite the narrow ranges used in the work, results showed the suitability of factorial analysis to evaluate the optimal conditions for growth and yessotoxin production by the dinoflagellate P. reticulatum.

Optimization of minoxidil microemulsions using fractional factorial design approach.

PubMed

Jaipakdee, Napaphak; Limpongsa, Ekapol; Pongjanyakul, Thaned

2016-01-01

The objective of this study was to apply fractional factorial and multi-response optimization designs using desirability function approach for developing topical microemulsions. Minoxidil (MX) was used as a model drug. Limonene was used as an oil phase. Based on solubility, Tween 20 and caprylocaproyl polyoxyl-8 glycerides were selected as surfactants, propylene glycol and ethanol were selected as co-solvent in aqueous phase. Experiments were performed according to a two-level fractional factorial design to evaluate the effects of independent variables: Tween 20 concentration in surfactant system (X1), surfactant concentration (X2), ethanol concentration in co-solvent system (X3), limonene concentration (X4) on MX solubility (Y1), permeation flux (Y2), lag time (Y3), deposition (Y4) of MX microemulsions. It was found that Y1 increased with increasing X3 and decreasing X2, X4; whereas Y2 increased with decreasing X1, X2 and increasing X3. While Y3 was not affected by these variables, Y4 increased with decreasing X1, X2. Three regression equations were obtained and calculated for predicted values of responses Y1, Y2 and Y4. The predicted values matched experimental values reasonably well with high determination coefficient. By using optimal desirability function, optimized microemulsion demonstrating the highest MX solubility, permeation flux and skin deposition was confirmed as low level of X1, X2 and X4 but high level of X3.

Optimization and influence of parameter affecting the compressive strength of geopolymer concrete containing recycled concrete aggregate: using full factorial design approach

NASA Astrophysics Data System (ADS)

Krishnan, Thulasirajan; Purushothaman, Revathi

2017-07-01

There are several parameters that influence the properties of geopolymer concrete, which contains recycled concrete aggregate as the coarse aggregate. In the present study, the vital parameters affecting the compressive strength of geopolymer concrete containing recycled concrete aggregate are analyzedby varying four parameters with two levels using full factorial design in statistical software Minitab® 17. The objective of the present work is to gain an idea on the optimization, main parameter effects, their interactions and the predicted response of the model generated using factorial design. The parameters such as molarity of sodium hydroxide (8M and 12M), curing time (6hrs and 24 hrs), curing temperature (60°C and 90°C) and percentage of recycled concrete aggregate (0% and 100%) are considered. The results show that the curing time, molarity of sodium hydroxide and curing temperature were the orderly significant parameters and the percentage of Recycled concrete aggregate (RCA) was statistically insignificant in the production of geopolymer concrete. Thus, it may be noticeable that the RCA content had negligible effect on the compressive strength of geopolymer concrete. The expected responses from the generated model showed a satisfactory and rational agreement to the experimental data with the R2 value of 97.70%. Thus, geopolymer concrete comprising recycled concrete aggregate can solve the major social and environmental concerns such as the depletion of the naturally available aggregate sources and disposal of construction and demolition waste into the landfill.

Smart factory in the context of 4th industrial revolution: challenges and opportunities for Romania

NASA Astrophysics Data System (ADS)

Pîrvu, B. C.; Zamfirescu, C. B.

2017-08-01

Manufacturing companies, independent of operation sector and size, must be able to produce lot size one products, just-in-time at a competitive cost. Coping with this high adaptability and short reaction times proves to be very challenging. New approaches must be taken into consideration for designing modular, intelligent and cooperative production systems which are easy to integrate with the entire factory. The coined term for this network of intelligent interacting artefacts system is cyber-physical systems (CPS). CPS is often used in the context of Industry 4.0 - or what many consider the forth industrial revolution. The paper presents an overview of key technological and social requirements to map the Smart Factory vision into reality. Finally, global and Romanian specific challenges hindering the vision of a true Smart Factory to become reality are presented.

Architecture and biogenesis of plus-strand RNA virus replication factories

PubMed Central

Paul, David; Bartenschlager, Ralf

2013-01-01

Plus-strand RNA virus replication occurs in tight association with cytoplasmic host cell membranes. Both, viral and cellular factors cooperatively generate distinct organelle-like structures, designated viral replication factories. This compartmentalization allows coordination of the different steps of the viral replication cycle, highly efficient genome replication and protection of the viral RNA from cellular defense mechanisms. Electron tomography studies conducted during the last couple of years revealed the three dimensional structure of numerous plus-strand RNA virus replication compartments and highlight morphological analogies between different virus families. Based on the morphology of virus-induced membrane rearrangements, we propose two separate subclasses: the invaginated vesicle/spherule type and the double membrane vesicle type. This review discusses common themes and distinct differences in the architecture of plus-strand RNA virus-induced membrane alterations and summarizes recent progress that has been made in understanding the complex interplay between viral and co-opted cellular factors in biogenesis and maintenance of plus-strand RNA virus replication factories. PMID:24175228

Influence of a three-phase separator configuration on the performance of an upflow anaerobic sludge bed reactor treating wastewater from a fruit-canning factory.

PubMed

Wongnoi, Rachbordin; Songkasiri, Warinthorn; Phalakornkule, Chantaraporn

2007-02-01

The objective of this study was to investigate the influence of a three-phase separator configuration on the performance of an upflow anaerobic sludge bed (USAB) treating wastewater from a fruit canning factory. The performances of two 30-L UASB reactors--one with a modified three-phase separator giving a spiral flow pattern and the other with a conventional configuration-were investigated in parallel. Wastewater, with a chemical oxygen demand (COD) concentration between 2000 and 7000 mg/L, was obtained from a fruit-canning factory. Based on the effluent data of the first 100 operation days, the UASB with the three-phase separator giving spiral flow patterns yielded up to 25% lower biomass washout. It also showed better efficiencies in treating wastewater--up to 60% lower effluent COD, up to 20% higher COD percent removal, and up to 29% higher biogas production. This work presents evidence of an improvement on the conventional physical design of a UASB.

Estimating the monetary value of willingness to pay for E-book reader's attributes using partially confounded factorial conjoint choice experiment

NASA Astrophysics Data System (ADS)

Yong, Chin-Khian

2013-09-01

A partially confounded factorial conjoint choice experiments design was used to examine the monetary value of the willingness to pay for E-book Reader's attributes. Conjoint analysis is an efficient, cost-effective, and most widely used quantitative method in marketing research to understand consumer preferences and value trade-off. Value can be interpreted by customer or consumer as the received of multiple benefits from a price that was paid. The monetary value of willingness to pay for battery life, internal memory, external memory, screen size, text to Speech, touch screen, and converting handwriting to digital text of E-book reader were estimated in this study. Due to the significant interaction effect of the attributes with the price, the monetary values for the seven attributes were found to be different at different values of odds of purchasing versus not purchasing. The significant interactions effects were one of the main contribution of the partially confounded factorial conjoint choice experiment.

Medical Technology Base Master Plan

DTIC Science & Technology

1990-03-01

methodologes to evaluate off ectiveness of current and new Integrated protectivb equxipment systems. The failure of the system designer to adequately consider...With animal studies to use fewer than one-tenth the nu~r~e of aniimals used In standard factorial experimental designs , and "* Preliminary development of...research and developmnent have Produced Cost savings as well as sustained and augmented combat and non -combat rniss~on effectiveness. Examples 0f the Armys

The Role of Spatial Analysis in Detecting the Consequence of the Factory Sites : Case Study of Assalaya Factory-Sudan

NASA Astrophysics Data System (ADS)

Khair, Amar Sharaf Eldin; Purwanto; RyaSunoko, Henna; Abdullah, Omer Adam

2018-02-01

Spatial analysis is considered as one of the most important science for identifying the most appropriate site for industrialization and also to alleviate the environmental ramifications caused by factories. This study aims at analyzing the Assalaya sugarcane factory site by the use of spatial analysis to determine whether it has ramification on the White Nile River. The methodology employed for this study is Global Position System (GPS) to identify the coordinate system of the study phenomena and other relative factors. The study will also make use Geographical Information System (GIS) to implement the spatial analysis. Satellite data (LandsatDem-Digital Elevation Model) will be considered for the study area and factory in identifying the consequences by analyzing the location of the factory through several features such as hydrological, contour line and geological analysis. Data analysis reveals that the factory site is inappropriate and according to observation on the ground it has consequences on the White Nile River. Based on the finding, the study recommended some suggestions to avoid the aftermath of any factory in general. We have to take advantage of this new technological method to aid in selecting most apt locations for industries that will create an ambient environment.

The study design elements employed by researchers in preclinical animal experiments from two research domains and implications for automation of systematic reviews.

PubMed

O'Connor, Annette M; Totton, Sarah C; Cullen, Jonah N; Ramezani, Mahmood; Kalivarapu, Vijay; Yuan, Chaohui; Gilbert, Stephen B

2018-01-01

Systematic reviews are increasingly using data from preclinical animal experiments in evidence networks. Further, there are ever-increasing efforts to automate aspects of the systematic review process. When assessing systematic bias and unit-of-analysis errors in preclinical experiments, it is critical to understand the study design elements employed by investigators. Such information can also inform prioritization of automation efforts that allow the identification of the most common issues. The aim of this study was to identify the design elements used by investigators in preclinical research in order to inform unique aspects of assessment of bias and error in preclinical research. Using 100 preclinical experiments each related to brain trauma and toxicology, we assessed design elements described by the investigators. We evaluated Methods and Materials sections of reports for descriptions of the following design elements: 1) use of comparison group, 2) unit of allocation of the interventions to study units, 3) arrangement of factors, 4) method of factor allocation to study units, 5) concealment of the factors during allocation and outcome assessment, 6) independence of study units, and 7) nature of factors. Many investigators reported using design elements that suggested the potential for unit-of-analysis errors, i.e., descriptions of repeated measurements of the outcome (94/200) and descriptions of potential for pseudo-replication (99/200). Use of complex factor arrangements was common, with 112 experiments using some form of factorial design (complete, incomplete or split-plot-like). In the toxicology dataset, 20 of the 100 experiments appeared to use a split-plot-like design, although no investigators used this term. The common use of repeated measures and factorial designs means understanding bias and error in preclinical experimental design might require greater expertise than simple parallel designs. Similarly, use of complex factor arrangements creates novel challenges for accurate automation of data extraction and bias and error assessment in preclinical experiments.

Teaching fractional factorial experiments via course delegate designed experiments.

PubMed

Coleman, S; Antony, J

1999-01-01

Industrial experiments are fundamental in enhancing the understanding and knowledge of a process and product behavior. Designed industrial experiments assist people in understanding, investigating, and improving their processes. The purpose of a designed experiment is to understand which factors might influence the process output and then to determine those factor settings that optimize the process output. Teaching "design of experiments" using textbook examples does not fully shed light on how to identify and formulate the problem, identify factors, and determine the performance of the physical experiment. Presented here is an example of how to teach fractional factorial experiments in a course on designed experiments. Also presented is a practical, hands-on experiment that has been found to be extremely successful in instilling confidence and motivation in course delegates. The experiment provides a great stimulus to the delegates for the application of experimental design in their own work environment.

Examination of the Psychometric Properties of the Chinese Translated Behavioral Regulation in Exercise Questionnaire-2

ERIC Educational Resources Information Center

Chung, Pak Kwong; Liu, Jing Dong

2012-01-01

The present study was designed to examine the psychometric properties of the Chinese-translated Behavioral Regulation in Exercise Questionnaire-2 (Markland & Tobin, 2004). A sample of Chinese university students (N =555) was invited to take part in this study. Confirmatory factor analysis was employed to examine the factorial validity, and the…

Effects of irrigation on sorghum forage yield and quality in the central sands region of Wisconsin

USDA-ARS?s Scientific Manuscript database

A study was conducted to assess effects of irrigation on yield and quality of photoperiod sensitive (PS) and non-PS forage sorghum, sorghum-sudangrass, and sudangrass in comparison to corn in central Wisconsin. The study was a strip-plot design with a 5 x 8 factorial arrangement of treatments. Five ...

Effects of Feedback on Achievement Goals and Perceived Motivational Climate in Physical Education

ERIC Educational Resources Information Center

Erturan-Ilker, Gökçe

2014-01-01

The aim of the study is to determine the effects of teacher's positive and negative feedback on high school students' perceived motivational climate and achievement goals in a physical education setting. Forty seven ninth grade students participated in the study. The design was a 2 x 2 between subjects factorial crossing feedback condition…

Problem-Based Instructional Strategy and Numerical Ability as Determinants of Senior Secondary Achievement in Mathematics

ERIC Educational Resources Information Center

Badru, Ademola K.

2016-01-01

The study investigated Problem-based Instructional Strategy and Numerical ability as determinants of Senior Secondary Achievement in Mathematics. This study used 4 x 2 x 2 non-randomised control group Pretest-Posttest Quasi-experimental Factorial design. It consisted of two independent variables (treatment and Numerical ability) and one moderating…

Dietary Protein and Calcium Interact to Influence Calcium Retention: A Controlled Feeding Study

USDA-ARS?s Scientific Manuscript database

Objective: To test the effect of dietary protein on Ca (Ca) retention at low and high Ca intakes. Methods: In a randomized, controlled feeding study with a 2x2 factorial crossover design, healthy post-menopausal women (n=27), consumed either ~675 or ~1510 mg Ca/d, with both low and high protein (pro...

Improving Senior Secondary School Students' Attitude towards Mathematics through Self and Cooperative-Instructional Strategies

ERIC Educational Resources Information Center

Ifamuyiwa, S. A.; Akinsola, M. K.

2008-01-01

This study investigated the effects of self and cooperative-instructional strategies on senior secondary school students' attitude towards Mathematics. The moderating effects of locus of control and gender were also investigated. The study adopted pre-test and post-test, control group quasi-experimental design using a 3 x 2 x 2 factorial matrix…

Learning from Instructional Animations: How Does Prior Knowledge Mediate the Effect of Visual Cues?

ERIC Educational Resources Information Center

Arslan-Ari, I.

2018-01-01

The purpose of this study was to investigate the effects of cueing and prior knowledge on learning and mental effort of students studying an animation with narration. This study employed a 2 (no cueing vs. visual cueing) × 2 (low vs. high prior knowledge) between-subjects factorial design. The results revealed a significant interaction effect…

Optimization of a chondrogenic medium through the use of factorial design of experiments.

PubMed

Enochson, Lars; Brittberg, Mats; Lindahl, Anders

2012-12-01

The standard culture system for in vitro cartilage research is based on cells in a three-dimensional micromass culture and a defined medium containing the chondrogenic key growth factor, transforming growth factor (TGF)-β1. The aim of this study was to optimize the medium for chondrocyte micromass culture. Human chondrocytes were cultured in different media formulations, designed with a factorial design of experiments (DoE) approach and based on the standard medium for redifferentiation. The significant factors for the redifferentiation of the chondrocytes were determined and optimized in a two-step process through the use of response surface methodology. TGF-β1, dexamethasone, and glucose were significant factors for differentiating the chondrocytes. Compared to the standard medium, TGF-β1 was increased 30%, dexamethasone reduced 50%, and glucose increased 22%. The potency of the optimized medium was validated in a comparative study against the standard medium. The optimized medium resulted in micromass cultures with increased expression of genes important for the articular chondrocyte phenotype and in cultures with increased glycosaminoglycan/DNA content. Optimizing the standard medium with the efficient DoE method, a new medium that gave better redifferentiation for articular chondrocytes was determined.

Microstructural analysis of hot press formed 22MnB5 steel

NASA Astrophysics Data System (ADS)

Aziz, Nuraini; Aqida, Syarifah Nur; Ismail, Izwan

2017-10-01

This paper presents a microstructural study on hot press formed 22MnB5 steel for enhanced mechanical properties. Hot press forming process consists of simultaneous forming and quenching of heated blank. The 22MnB5 steel was processed at three different parameter settings: quenching time, water temperature and water flow rate. 22MnB5 was processed using 33 full factorial design of experiment (DOE). The full factorial DOE was designed using three factors of quenching time, water temperature and water flow rate at three levels. The factors level were quenching time range of 5 - 11 s, water temperature; 5 - 27°C and water flow rate; 20 - 40 L/min. The as-received and hot press forming processed steel was characterised for metallographic study and martensitic structure area percentage using JEOL Field Emission Scanning Electron Microscopic (FESEM). From the experimental finding, the hot press formed 22MnB5 steel consisted of 50 to 84% martensitic structure area. The minimum quenching time of 8 seconds was required to obtain formed sample with high percentage of martensite. These findings contribute to initial design of processing parameters in hot press forming of 22MnB5 steel blanks for automotive component.

Fostering Trust in Outdoor Leaders: The Role of Personal Attributes

ERIC Educational Resources Information Center

Shooter, Wynn; Paisley, Karen; Sibthorp, Jim

2012-01-01

This study examined trust development between participants of outdoor education programs and outdoor leaders. Participants were college students enrolled in outdoor education courses. Using a factorial survey design, the technical ability, interpersonal ability, benevolence, integrity, and gender of an outdoor leader was displayed randomly in a…

Inductive Learning: Does Interleaving Exemplars Affect Long-Term Retention?

ERIC Educational Resources Information Center

Zulkiply, Norehan; Burt, Jennifer S.

2013-01-01

Purpose: The present study investigated whether or not the benefits of interleaving of exemplars from several categories vary with retention interval in inductive learning. Methodology: Two experiments were conducted using paintings (Experiment 1) and textual materials (Experiment 2), and the experiments used a mixed factorial design. Forty…

Dietary L-arginine supplementation modulates lipopolysaccharide-induced systemic inflammatory response in broiler chickens

USDA-ARS?s Scientific Manuscript database

This study was conducted to evaluate whether dietary supplementation with L-arginine (Arg) could attenuate lipopolysaccharide (LPS)-induced systemic inflammatory response through LPS/TLR-4 signaling pathway in broilers. The experiment was designed as a 2 × 3 factorial arrangement (n = 8 cages/treatm...

Choice of the Metric for Effect Size in Meta-analysis.

ERIC Educational Resources Information Center

McGaw, Barry; Glass, Gene V.

1980-01-01

There are difficulties in expressing effect sizes on a common metric when some studies use transformed scales to express group differences, or use factorial designs or covariance adjustments to obtain a reduced error term. A common metric on which effect sizes may be standardized is described. (Author/RL)

Influence of the Formulation Parameters on the Particle Size and Encapsulation Efficiency of Resveratrol in PLA and PLA-PEG Blend Nanoparticles: A Factorial Design.

PubMed

Lindner, Gabriela da Rocha; Dalmolin, Luciana Facco; Khalil, Najeh Maissar; Mainardes, Rubiana Mara

2015-12-01

Polymeric nanoparticles are colloidal systems that promote protection and modification of physicochemical characteristics of a drug and that also ensure controlled and extended drug release. This paper reports a 2(3) factorial design study to optimize poly(lactide) (PLA) and poly(lactide)-polyethylene glycol (PLA-PEG) blend nanoparticles containing resveratrol (RVT) for prolonged release. The independent variables analyzed were solvent composition, surfactant concentration and ratio of aqueous to organic phase (two levels each factor). Mean particle size and RVT encapsulation efficiency were set as the dependent variables. The selected optimized parameters were set as organic phase comprised of a mixture of dichloromethane and ethyl acetate, 1% of surfactant polyvinyl alcohol and a 3:1 ratio of aqueous to organic phase, for both PLA and PLA-PEG blend nanoparticles. This formulation originated nanoparticles with size of 228 ± 10 nm and 185 ± 70 nm and RVT encapsulation efficiency of 82 ± 10% and 76 ± 7% for PLA and PLA-PEG blend nanoparticles, respectively. The in vitro release study showed a biphasic pattern with prolonged RVT release and PEG did not influence the RVT release. The in vitro release data were in favor of Higuchi-diffusion kinetics for both nanoformulations and the Kossmeyer-Peppas coefficient indicated that anomalous transport was the main release mechanism of RVT. PLA and PLA-PEG blend nanoparticles produced with single emulsion-solvent evaporation technology were found to be a promising approach for the incorporation of RVT and promoted its controlled release. The factorial design is a tool of great value in choosing formulations with optimized parameters.

A factorial design to identify process parameters affecting whole mechanically disrupted rat pancreata in a perfusion bioreactor.

PubMed

Sharp, Jamie; Spitters, Tim Wgm; Vermette, Patrick

2018-03-01

Few studies report whole pancreatic tissue culture, as it is a difficult task using traditional culture methods. Here, a factorial design was used to investigate the singular and combinational effects of flow, dissolved oxygen concentration (D.O.) and pulsation on whole mechanically disrupted rat pancreata in a perfusion bioreactor. Whole rat pancreata were cultured for 72 h under defined bioreactor process conditions. Secreted insulin was measured and histological (haematoxylin and eosin (H&E)) as well as immunofluorescent insulin staining were performed and quantified. The combination of flow and D.O. had the most significant effect on secreted insulin at 5 h and 24 h. The D.O. had the biggest effect on tissue histological quality, and pulsation had the biggest effect on the number of insulin-positive structures. Based on the factorial design analysis, bioreactor conditions using high flow, low D.O., and pulsation were selected to further study glucose-stimulated insulin secretion. Here, mechanically disrupted rat pancreata were cultured for 24 h under these bioreactor conditions and were then challenged with high glucose concentration for 6 h and high glucose + IBMX (an insulin secretagogue) for a further 6 h. These cultures secreted insulin in response to high glucose concentration in the first 6 h, however stimulated-insulin secretion was markedly weaker in response to high glucose concentration + IBMX thereafter. After this bioreactor culture period, higher tissue metabolic activity was found compared to that of non-bioreacted static controls. More insulin- and glucagon-positive structures, and extensive intact endothelial structures were observed compared to non-bioreacted static cultures. H&E staining revealed more intact tissue compared to static cultures. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:432-444, 2018. © 2017 American Institute of Chemical Engineers.

Unique Study Designs in Nephrology: N-of-1 Trials and Other Designs.

PubMed

Samuel, Joyce P; Bell, Cynthia S

2016-11-01

Alternatives to the traditional parallel-group trial design may be required to answer clinical questions in special populations, rare conditions, or with limited resources. N-of-1 trials are a unique trial design which can inform personalized evidence-based decisions for the patient when data from traditional clinical trials are lacking or not generalizable. A concise overview of factorial design, cluster randomization, adaptive designs, crossover studies, and n-of-1 trials will be provided along with pertinent examples in nephrology. The indication for analysis strategies such as equivalence and noninferiority trials will be discussed, as well as analytic pitfalls. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Factorial validation of the Attitudes toward Women Scale for Adolescents (AWSA) in assessing sexual behaviour patterns in Bolivian and Ecuadorian adolescents

PubMed Central

Jaruseviciene, Lina; De Meyer, Sara; Decat, Peter; Zaborskis, Apolinaras; Degomme, Olivier; Rojas, Mildrett; Hagens, Salazar Arnold; Auquilla, Nancy; Vega, Bernardo; Gorter, Anna C.; Orozco, Miguel; Lazarus, Jeffrey V.

2014-01-01

Background Adolescents’ health is greatly influenced by social determinants, including gender norms. Although research has shown that there is an association between gender attitudes and adolescents’ sexual behaviour, few studies have assessed this relationship carefully. The Attitudes toward Women Scale for Adolescents (AWSA) is widely used to assess gender attitudes among adolescents; however, to our knowledge it has not been applied in Latin America. Objective To apply AWSA in Latin America for the first time, to perform a factorial validation of this scale and to assess the relationship of gender attitudes and sexual behaviour in Bolivian and Ecuadorian adolescents. Design This cross-sectional study was carried out in 2011 among 14–18 year olds in 20 high schools in Cochabamba (Bolivia) and six in Cuenca (Ecuador) as a part of a larger project. Schools were purposively selected. A Spanish version of the 12-item AWSA was employed for this study. The assessed aspects of adolescent sexual behaviour were: reported sexual intercourse, reported positive experience during last sexual intercourse and reported current use of contraception. The psychometric properties of AWSA were investigated, and both explanatory and confirmatory factorial analyses were performed. Results The number of questionnaires included in the analysis was 3,518 in Bolivia and 2,401 in Ecuador. A factorial analysis of AWSA resulted in three factors: power dimension (PD), equality dimension (ED) and behavioural dimension (BD). ED showed the highest correlates with adolescent sexual behaviour. Higher scores of this dimension were associated with a more positive experience of sexual relationships, a higher current use of modern contraception and greater sexual activity among girls. Conclusions This study revealed a three-factorial structure of AWSA and demonstrated that by employing factors, the sensitivity of AWSA increases as compared to using the scale as a whole to assess sexual behaviour. This could have important implications for future research on gender and the sexual experiences of adolescents. PMID:24461355

Etoricoxib - preemptive and postoperative analgesia (EPPA) in patients with laparotomy or thoracotomy - design and protocols

PubMed Central

2010-01-01

Background and Objective Our objective was to report on the design and essentials of the Etoricoxib protocol- Preemptive and Postoperative Analgesia (EPPA) Trial, investigating whether preemptive analgesia with cox-2 inhibitors is more efficacious than placebo in patients who receive either laparotomy or thoracotomy. Design and Methods The study is a 2 × 2 factorial armed, double blinded, bicentric, randomised placebo-controlled trial comparing (a) etoricoxib and (b) placebo in a pre- and postoperative setting. The total observation period is 6 months. According to a power analysis, 120 patients scheduled for abdominal or thoracic surgery will randomly be allocated to either the preemptive or the postoperative treatment group. These two groups are each divided into two arms. Preemptive group patients receive etoricoxib prior to surgery and either etoricoxib again or placebo postoperatively. Postoperative group patients receive placebo prior to surgery and either placebo again or etoricoxib after surgery (2 × 2 factorial study design). The Main Outcome Measure is the cumulative use of morphine within the first 48 hours after surgery (measured by patient controlled analgesia PCA). Secondary outcome parameters include a broad range of tests including sensoric perception and genetic polymorphisms. Discussion The results of this study will provide information on the analgesic effectiveness of etoricoxib in preemptive analgesia and will give hints on possible preventive effects of persistent pain. Trial registration NCT00716833 PMID:20504378

Modeling and multi-response optimization of pervaporation of organic aqueous solutions using desirability function approach.

PubMed

Cojocaru, C; Khayet, M; Zakrzewska-Trznadel, G; Jaworska, A

2009-08-15

The factorial design of experiments and desirability function approach has been applied for multi-response optimization in pervaporation separation process. Two organic aqueous solutions were considered as model mixtures, water/acetonitrile and water/ethanol mixtures. Two responses have been employed in multi-response optimization of pervaporation, total permeate flux and organic selectivity. The effects of three experimental factors (feed temperature, initial concentration of organic compound in feed solution, and downstream pressure) on the pervaporation responses have been investigated. The experiments were performed according to a 2(3) full factorial experimental design. The factorial models have been obtained from experimental design and validated statistically by analysis of variance (ANOVA). The spatial representations of the response functions were drawn together with the corresponding contour line plots. Factorial models have been used to develop the overall desirability function. In addition, the overlap contour plots were presented to identify the desirability zone and to determine the optimum point. The optimal operating conditions were found to be, in the case of water/acetonitrile mixture, a feed temperature of 55 degrees C, an initial concentration of 6.58% and a downstream pressure of 13.99 kPa, while for water/ethanol mixture a feed temperature of 55 degrees C, an initial concentration of 4.53% and a downstream pressure of 9.57 kPa. Under such optimum conditions it was observed experimentally an improvement of both the total permeate flux and selectivity.

The HERrespect intervention to address violence against female garment workers in Bangladesh: study protocol for a quasi-experimental trial.

PubMed

Al Mamun, Mahfuz; Parvin, Kausar; Yu, Marat; Wan, Jessica; Willan, Samantha; Gibbs, Andrew; Jewkes, Rachel; Naved, Ruchira Tabassum

2018-04-18

Women in Bangladesh experience high rates of Intimate Partner Violence (IPV). IPV is more prevalent against income earning women compared to their non-earning counterparts, and Workplace Violence (WPV) is also common. Such violence is a violation of women's rights, and also constrains them from contributing to their personal growth, household, community and the economy at large. There is limited evidence on what works to prevent IPV and WPV amongst garment workers. This paper describes an evaluation of HERrespect, an intervention which aims to reduce IPV and WPV against female garment workers in and around Dhaka, Bangladesh. The trial employs a quasi-experimental design, with four intervention and four control factories. In the intervention factories a randomly selected cohort of married female line workers, a cohort of male line workers, and all middle management staff received the intervention. The intervention strategies involved (1) gender transformative group-based training for workers and management staff; (2) joint session between workers (15 female and male) and middle-management staff; (3) factory-wide activities; (4) awareness raising among top management; (5) factory policy review and development and 6) a community based campaign. For the evaluation, a cohort of randomly selected female workers and a cohort of selected management staff have been established. All workers (n = 800) and management staff (n = 395) from these cohorts were interviewed at baseline using two different questionnaires, and will be interviewed in the endline, 24 months post-baseline. Intention to treat analysis will be used for assessing the impact of HERrespect, comparing the intervention and control factories. To our knowledge this is the first study that seeks to evaluate the impact on IPV and WPV, of group sessions with female workers, male workers, and management; factory-wide campaigns and a community intervention among female garment workers in Bangladesh. Apart from informing programmers and policy makers about intervention effectiveness in reducing IPV and WPV against female garment workers this study will also present evidence on an intervention tailored to the situation in the garment sector, which makes HERrespect scalable. ClinicalTrials.gov NCT03304015, retrospectively registered on October 06, 2017.

A Survey of the Medical Needs of a Group of Small Factories*

PubMed Central

Lee, W. R.

1962-01-01

The present interest in medical services for small factories is matched by the limited objective information which is available on the demand for and needs of such services. As a teaching project, a survey was made of factories with between 30 and 200 employees on an estate in the North West where there was no organized medical service. Unfortunately, time allowed only 22 factories to be visited. The findings, therefore, are regarded as indicative rather than conclusive, but this does not detract from their interest. Factories were visited by two or three postgraduate students who completed a questionnaire designed to standardize their findings. The questionnaire is included as an appendix to this paper. Regarding the demand for medical services, four of the 22 factories were subsidiaries of larger organizations and had part-time medical advice, 14 expressed no interest even if this would have involved no financial commitment, and the remaining four were interested for differing reasons. The needs of the factories in this context were found to be, first, advice and perhaps better supervision of non-mechanical hazards and, secondly, supervision of the first aid arrangements. From the ambulance journey records of the local authority there appeared to be no great demand for local casualty facilities. To meet these needs it is suggested that the functions of the appointed factory doctor might be modified to include wider supervision of non-mechanical hazards and supervision of first aid arrangements. It is also suggested that the National Health Service should form the basis for dealing with those cases requiring more than first aid. PMID:14463582

Industrial systems biology and its impact on synthetic biology of yeast cell factories.

PubMed

Fletcher, Eugene; Krivoruchko, Anastasia; Nielsen, Jens

2016-06-01

Engineering industrial cell factories to effectively yield a desired product while dealing with industrially relevant stresses is usually the most challenging step in the development of industrial production of chemicals using microbial fermentation processes. Using synthetic biology tools, microbial cell factories such as Saccharomyces cerevisiae can be engineered to express synthetic pathways for the production of fuels, biopharmaceuticals, fragrances, and food flavors. However, directing fluxes through these synthetic pathways towards the desired product can be demanding due to complex regulation or poor gene expression. Systems biology, which applies computational tools and mathematical modeling to understand complex biological networks, can be used to guide synthetic biology design. Here, we present our perspective on how systems biology can impact synthetic biology towards the goal of developing improved yeast cell factories. Biotechnol. Bioeng. 2016;113: 1164-1170. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Proposed variations of the stepped-wedge design can be used to accommodate multiple interventions.

PubMed

Lyons, Vivian H; Li, Lingyu; Hughes, James P; Rowhani-Rahbar, Ali

2017-06-01

Stepped-wedge design (SWD) cluster-randomized trials have traditionally been used for evaluating a single intervention. We aimed to explore design variants suitable for evaluating multiple interventions in an SWD trial. We identified four specific variants of the traditional SWD that would allow two interventions to be conducted within a single cluster-randomized trial: concurrent, replacement, supplementation, and factorial SWDs. These variants were chosen to flexibly accommodate study characteristics that limit a one-size-fits-all approach for multiple interventions. In the concurrent SWD, each cluster receives only one intervention, unlike the other variants. The replacement SWD supports two interventions that will not or cannot be used at the same time. The supplementation SWD is appropriate when the second intervention requires the presence of the first intervention, and the factorial SWD supports the evaluation of intervention interactions. The precision for estimating intervention effects varies across the four variants. Selection of the appropriate design variant should be driven by the research question while considering the trade-off between the number of steps, number of clusters, restrictions for concurrent implementation of the interventions, lingering effects of each intervention, and precision of the intervention effect estimates. Copyright © 2017 Elsevier Inc. All rights reserved.

Construction of social value or utility-based health indices: the usefulness of factorial experimental design plans.

PubMed

Cadman, D; Goldsmith, C

1986-01-01

Global indices, which aggregate multiple health or function attributes into a single summary indicator, are useful measures in health research. Two key issues must be addressed in the initial stages of index construction from the universe of possible health and function attributes, which ones should be included in a new index? and how simple can the statistical model be to combine attributes into a single numeric index value? Factorial experimental designs were used in the initial stages of developing a function index for evaluating a program for the care of young handicapped children. Beginning with eight attributes judged important to the goals of the program by clinicians, social preference values for different function states were obtained from 32 parents of handicapped children and 32 members of the community. Using category rating methods each rater scored 16 written multi-attribute case descriptions which contained information about a child's status for all eight attributes. Either a good or poor level of each function attribute and age 3 or 5 years were described in each case. Thus, 2(8) = 256 different cases were rated. Two factorial design plans were selected and used to allocate case descriptions to raters. Analysis of variance determined that seven of the eight clinician selected attributes were required in a social value based index for handicapped children. Most importantly, the subsequent steps of index construction could be greatly simplified by the finding that a simple additive statistical model without complex attribute interaction terms was adequate for the index. We conclude that factorial experimental designs are an efficient, feasible and powerful tool for the initial stages of constructing a multi-attribute health index.

Statistical Modeling Studies of Iron Recovery from Red Mud Using Thermal Plasma

NASA Astrophysics Data System (ADS)

Swagat, S. Rath; Archana, Pany; Jayasankar, K.; Ajit, K. Mitra; C. Satish, Kumar; Partha, S. Mukherjee; Barada, K. Mishra

2013-05-01

Optimization studies of plasma smelting of red mud were carried out. Reduction of the dried red mud fines was done in an extended arc plasma reactor to recover the pig iron. Lime grit and low ash metallurgical (LAM) coke were used as the flux and reductant, respectively. 2-level factorial design was used to study the influence of all parameters on the responses. Response surface modeling was done with the data obtained from statistically designed experiments. Metal recovery at optimum parameters was found to be 79.52%.

Factorial Design Approach in Proportioning Prestressed Self-Compacting Concrete

PubMed Central

Long, Wu-Jian; Khayat, Kamal Henri; Lemieux, Guillaume; Xing, Feng; Wang, Wei-Lun

2015-01-01

In order to model the effect of mixture parameters and material properties on the hardened properties of, prestressed self-compacting concrete (SCC), and also to investigate the extensions of the statistical models, a factorial design was employed to identify the relative significance of these primary parameters and their interactions in terms of the mechanical and visco-elastic properties of SCC. In addition to the 16 fractional factorial mixtures evaluated in the modeled region of −1 to +1, eight axial mixtures were prepared at extreme values of −2 and +2 with the other variables maintained at the central points. Four replicate central mixtures were also evaluated. The effects of five mixture parameters, including binder type, binder content, dosage of viscosity-modifying admixture (VMA), water-cementitious material ratio (w/cm), and sand-to-total aggregate ratio (S/A) on compressive strength, modulus of elasticity, as well as autogenous and drying shrinkage are discussed. The applications of the models to better understand trade-offs between mixture parameters and carry out comparisons among various responses are also highlighted. A logical design approach would be to use the existing model to predict the optimal design, and then run selected tests to quantify the influence of the new binder on the model. PMID:28787990

Development and validation of LC-MS/MS method for the quantification of oxcarbazepine in human plasma using an experimental design.

PubMed

Srinubabu, Gedela; Ratnam, Bandaru Veera Venkata; Rao, Allam Appa; Rao, Medicherla Narasimha

2008-01-01

A rapid tandem mass spectrometric (MS-MS) method for the quantification of Oxcarbazepine (OXB) in human plasma using imipramine as an internal standard (IS) has been developed and validated. Chromatographic separation was achieved isocratically on a C18 reversed-phase column within 3.0 min, using a mobile phase of acetonitrile-10 mM ammonium formate (90 : 10 v/v) at a flow rate of 0.3 ml/min. Quantitation was achieved using multiple reaction monitoring (MRM) scan at MRM transitions m/z 253>208 and m/z 281>86 for OXB and the IS respectively. Calibration curves were linear over the concentration range of 0.2-16 mug/ml (r>0.999) with a limit of quantification of 0.2 mug/ml. Analytical recoveries of OXB from spiked human plasma were in the range of 74.9 to 76.3%. Plackett-Burman design was applied for screening of chromatographic and mass spectrometric factors; factorial design was applied for optimization of essential factors for the robustness study. A linear model was postulated and a 2(3) full factorial design was employed to estimate the model coefficients for intermediate precision. More specifically, experimental design helps the researcher to verify if changes in factor values produce a statistically significant variation of the observed response. The strategy is most effective if statistical design is used in most or all stages of the screening and optimizing process for future method validation of pharmacokinetic and bioequivalence studies.

New generation electron-positron factories

NASA Astrophysics Data System (ADS)

Zobov, Mikhail

2011-09-01

In 2010 we celebrate 50 years since commissioning of the first particle storage ring ADA in Frascati (Italy) that also became the first electron-positron collider in 1964. After that date the particle colliders have increased their intensity, luminosity and energy by several orders of magnitude. Namely, because of the high stored beam currents and high rate of useful physics events (luminosity) the modern electron-positron colliders are called "factories". However, the fundamental physics has required luminosities by 1-2 orders of magnitudes higher with respect to those presently achieved. This task can be accomplished by designing a new generation of factories exploiting the potential of a new collision scheme based on the Crab Waist (CW) collision concept recently proposed and successfully tested at Frascati. In this paper we discuss the performance and limitations of the present generation electron-positron factories and give a brief overview of new ideas and collision schemes proposed for further collider luminosity increase. In more detail we describe the CW collision concept and the results of the crab waist collision tests in DAϕNE, the Italian ϕ-factory. Finally, we briefly describe most advanced projects of the next generation factories based on the CW concept: SuperB in Italy, SuperKEKB in Japan and SuperC-Tau in Russia.

Automated production of plant-based vaccines and pharmaceuticals.

PubMed

Wirz, Holger; Sauer-Budge, Alexis F; Briggs, John; Sharpe, Aaron; Shu, Sudong; Sharon, Andre

2012-12-01

A fully automated "factory" was developed that uses tobacco plants to produce large quantities of vaccines and other therapeutic biologics within weeks. This first-of-a-kind factory takes advantage of a plant viral vector technology to produce specific proteins within the leaves of rapidly growing plant biomass. The factory's custom-designed robotic machines plant seeds, nurture the growing plants, introduce a viral vector that directs the plant to produce a target protein, and harvest the biomass once the target protein has accumulated in the plants-all in compliance with Food and Drug Administration (FDA) guidelines (e.g., current Good Manufacturing Practices). The factory was designed to be time, cost, and space efficient. The plants are grown in custom multiplant trays. Robots ride up and down a track, servicing the plants and delivering the trays from the lighted, irrigated growth modules to each processing station as needed. Using preprogrammed robots and processing equipment eliminates the need for human contact, preventing potential contamination of the process and economizing the operation. To quickly produce large quantities of protein-based medicines, we transformed a laboratory-based biological process and scaled it into an industrial process. This enables quick, safe, and cost-effective vaccine production that would be required in case of a pandemic.

Factors affecting pre-ovulatory follicle diameter and ovulation rate following GnRH in postpartum beef cows Part II: Anestrous cows

USDA-ARS?s Scientific Manuscript database

The objectives of this study were to identify factors affecting ovulatory follicle size in anestrous suckled beef cows so that we could determine how ovulatory follicle size affects fertility. This study used a two by two factorial design in which anestrous suckled beef cows (n = 55) either ovulate...

The Interaction of Selective Attention and Cognitive Development on Achievement in Nigerian Secondary School Genetics

ERIC Educational Resources Information Center

Okoye, Namdi N. S.

2009-01-01

The study tried to examine the interaction between two independent variables of selective attention and cognitive development on Achievement in Genetics at the Secondary School level. In looking at the problem of this study three null hypotheses were generated for testing at 0.05 level of significance. Factorial Analysis of Variance design with…

The Effect of Rehearsal Learning and Warm-up on the Speed of Different Swimming Strokes

ERIC Educational Resources Information Center

Magno, Carlo; Mascardo, Elizabeth

2009-01-01

The study investigated the effects of rehearsal learning and warm-up exercise on the time of performing different swimming strokes. The study was conducted among 202 college freshmen students taking up a course on physical education concentrated in swimming. The design employed is a mixed factorial (2 X 2) where time of swimming is measured before…

A quality by design approach to optimization of emulsions for electrospinning using factorial and D-optimal designs.

PubMed

Badawi, Mariam A; El-Khordagui, Labiba K

2014-07-16

Emulsion electrospinning is a multifactorial process used to generate nanofibers loaded with hydrophilic drugs or macromolecules for diverse biomedical applications. Emulsion electrospinnability is greatly impacted by the emulsion pharmaceutical attributes. The aim of this study was to apply a quality by design (QbD) approach based on design of experiments as a risk-based proactive approach to achieve predictable critical quality attributes (CQAs) in w/o emulsions for electrospinning. Polycaprolactone (PCL)-thickened w/o emulsions containing doxycycline HCl were formulated using a Span 60/sodium lauryl sulfate (SLS) emulsifier blend. The identified emulsion CQAs (stability, viscosity and conductivity) were linked with electrospinnability using a 3(3) factorial design to optimize emulsion composition for phase stability and a D-optimal design to optimize stable emulsions for viscosity and conductivity after shifting the design space. The three independent variables, emulsifier blend composition, organic:aqueous phase ratio and polymer concentration, had a significant effect (p<0.05) on emulsion CQAs, the emulsifier blend composition exerting prominent main and interaction effects. Scanning electron microscopy (SEM) of emulsion-electrospun NFs and desirability functions allowed modeling of emulsion CQAs to predict electrospinnable formulations. A QbD approach successfully built quality in electrospinnable emulsions, allowing development of hydrophilic drug-loaded nanofibers with desired morphological characteristics. Copyright © 2014 Elsevier B.V. All rights reserved.

Cameo: A Python Library for Computer Aided Metabolic Engineering and Optimization of Cell Factories.

PubMed

Cardoso, João G R; Jensen, Kristian; Lieven, Christian; Lærke Hansen, Anne Sofie; Galkina, Svetlana; Beber, Moritz; Özdemir, Emre; Herrgård, Markus J; Redestig, Henning; Sonnenschein, Nikolaus

2018-04-20

Computational systems biology methods enable rational design of cell factories on a genome-scale and thus accelerate the engineering of cells for the production of valuable chemicals and proteins. Unfortunately, the majority of these methods' implementations are either not published, rely on proprietary software, or do not provide documented interfaces, which has precluded their mainstream adoption in the field. In this work we present cameo, a platform-independent software that enables in silico design of cell factories and targets both experienced modelers as well as users new to the field. It is written in Python and implements state-of-the-art methods for enumerating and prioritizing knockout, knock-in, overexpression, and down-regulation strategies and combinations thereof. Cameo is an open source software project and is freely available under the Apache License 2.0. A dedicated Web site including documentation, examples, and installation instructions can be found at http://cameo.bio . Users can also give cameo a try at http://try.cameo.bio .

Pion Production for Neutrino Factory-challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Breton, Florian; Le Couedic, Clement; Soler, F. J. P.

2011-10-06

One of the key issues in the design of a Neutrino Factory target station is the determination of the optimum kinetic energy of the proton beam due to the large uncertainties in simulations of protons impinging on nuclear targets. In this paper we have developed a procedure to correct GEANT4 simulations for the HARP data, and we have determined the yield of muons expected at the front-end of a Neutrino Factory as a function of target material (Be, C, Al, Ta and Pb) and energy (3-12 GeV).The maximum muon yield is found between 5 and 8 GeV for high Zmore » targets and 3 GeV for low Z targets.« less

Influence of Web Based Cooperative Learning Strategy and Achiever Motivation on Student Study Outcome

ERIC Educational Resources Information Center

Hariadi, Bambang; Wurijanto, Tutut

2016-01-01

The research aimed at examining the effect of instructional strategy (web-based STAD and text-based STAD) and achiever motivation toward student learning outcomes. The research implied quasi-experimental design with nonequivalent control group factorial version. The subjects were undergraduate students of Information Systems of academic year…

Enhancing Eight Grade Students' Scientific Conceptual Change and Scientific Reasoning through a Web-Based Learning Program

ERIC Educational Resources Information Center

Liao, Ya-Wen; She, Hsiao-Ching

2009-01-01

This study reports the impacts of the Scientific Concept Construction and Reconstruction (SCCR) digital learning system on eighth grade students' concept construction, conceptual change, and scientific reasoning involving the topic of "atoms". A two-factorial experimental design was carried out to investigate the effects of the approach…

The Loci Mnemonic Technique in Learning and Memory.

ERIC Educational Resources Information Center

Montague, William E.; Carter, John

This study investigated the facilitative effects of the loci system using mental imagery for acquisition and recall within a retroactive inhibition (RI) paradigm. Fifty-five college undergraduates were randomly assigned to five treatment conditions. Four groups formed cells in a 2x2 factorial design which included (1) an RI factor (AB-AD vs.…

The Factor Structure of the Self-Directed Learning Readiness Scale (SDLRS).

ERIC Educational Resources Information Center

Wang, Xiaoping; And Others

A study involving teachers and administrators from 16 elementary, middle, and high schools in Tennessee investigated the factorial structure of the Self-Directed Learning Readiness Scale (SDLRS). The SDLRS includes 58 Likert-like items designed to measure the readiness of adult learners to assume self-direction in the learning process. Study…

Breast muscle tissue characteristics in growing broilers

USDA-ARS?s Scientific Manuscript database

Muscle cell development in broilers influences growth rate, breast meat yield, and meat quality. The objective of this study was to characterize muscle tissue changes in breast muscles from two commercial lines of broilers from 21 to 56 days of age. The experiment was designed as a 2×2×6 factorial...

Further Validation of the Coach Identity Prominence Scale

ERIC Educational Resources Information Center

Pope, J. Paige; Hall, Craig R.

2014-01-01

This study was designed to examine select psychometric properties of the Coach Identity Prominence Scale (CIPS), including the reliability, factorial validity, convergent validity, discriminant validity, and predictive validity. Coaches (N = 338) who averaged 37 (SD = 12.27) years of age, had a mean of 13 (SD = 9.90) years of coaching experience,…

Student Reactions to Public Safety Reports of Hate Crimes

ERIC Educational Resources Information Center

Kahl, Jessica E.; Koenig, Anne; Smith, Ramon

2013-01-01

This study investigated participant's reactions to hate crime versus nonbiased crime incident reports that included more or less detail about the crime using a 2 (victim race: African American, unstated) × 2 (amount of information: vague, detailed) between-subjects factorial design. We hypothesized that participants would be more sympathetic,…

Social vs. Self-Directed Events among Japanese and Americans

ERIC Educational Resources Information Center

Smith, Herman W.; Francis, Linda E.

2005-01-01

Cultural expectations provide meaning to human perceptions of who-does-what-to-whom-where. However, the effects of actions directed at oneself have been much less systematically studied. This article replicates the American factorial design of Britt and Heise (1992) in a Japanese setting. The analysis demonstrates both cultural similarities and…

Electrospinning of Polyaniline/Poly(Lactic Acid) Ultrathin Fibers: Process and Statistical Modeling using a Non-Gaussian Approach

USDA-ARS?s Scientific Manuscript database

Fibers of poly(lactic acid) (PLA) blended with p-toluenesulfonic acid-doped polyaniline, PAni.TSA, were obtained by lectrospinning, following a factorial design which was used mainly to study the effect of four process parameters (PLA solution concentration, PAni solution concentration, applied volt...

NR/EPDM elastomeric rubber blend miscibility evaluation by two-level fractional factorial design of experiment

NASA Astrophysics Data System (ADS)

Razak, Jeefferie Abd; Ahmad, Sahrim Haji; Ratnam, Chantara Thevy; Mahamood, Mazlin Aida; Yaakub, Juliana; Mohamad, Noraiham

2014-09-01

Fractional 25 two-level factorial design of experiment (DOE) was applied to systematically prepare the NR/EPDM blend using Haake internal mixer set-up. The process model of rubber blend preparation that correlates the relationships between the mixer process input parameters and the output response of blend compatibility was developed. Model analysis of variance (ANOVA) and model fitting through curve evaluation finalized the R2 of 99.60% with proposed parametric combination of A = 30/70 NR/EPDM blend ratio; B = 70°C mixing temperature; C = 70 rpm of rotor speed; D = 5 minutes of mixing period and E = 1.30 phr EPDM-g-MAH compatibilizer addition, with overall 0.966 desirability. Model validation with small deviation at +2.09% confirmed the repeatability of the mixing strategy with valid maximum tensile strength output representing the blend miscibility. Theoretical calculation of NR/EPDM blend compatibility is also included and compared. In short, this study provides a brief insight on the utilization of DOE for experimental simplification and parameter inter-correlation studies, especially when dealing with multiple variables during elastomeric rubber blend preparation.

Enhancing EPA Content in an Arctic Diatom: A Factorial Design Study to Evaluate Interactive Effects of Growth Factors.

PubMed

Steinrücken, Pia; Mjøs, Svein A; Prestegard, Siv K; Erga, Svein R

2018-01-01

Microalgae with a high content of the omega-3 polyunsaturated fatty acids (PUFAs), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA) are of great demand for microalgae-based technologies. An Arctic strain of the diatom Attheya septentrionalis was shown in previous experiments to increase its EPA content from 3.0 to 4.6% of dry weight (DW) in the nutrient-replete exponential phase and nutrient-depleted stationary phase, respectively. In the present study, a factorial-design experiment was used, to investigate this effect in more detail and in combination with varying salinities and irradiances. A mathematical model revealed that both growth phase and salinity, alone and in combination, influenced the EPA content significantly. Maximum EPA values of 7.1% DW were obtained at a salinity of 22 and after 5 days in stationary phase, and might be related to a decreased silica content, an accumulation of storage lipids containing EPA, or both. However, growth rates were lower for low salinity (0.54 and 0.57 d -1 ) than high salinity (0.77 and 0.98 d -1 ) cultures.

Pediatric Diabetic Ketoacidosis, Fluid Therapy and Cerebral Injury: The Design of a Factorial Randomized Controlled Trial

PubMed Central

Glaser, Nicole S.; Ghetti, Simona; Casper, T. Charles; Dean, J. Michael; Kuppermann, Nathan

2013-01-01

Treatment protocols for pediatric diabetic ketoacidosis (DKA) vary considerably among centers in the United States and worldwide. The optimal protocol for intravenous fluid administration is an area of particular controversy, mainly in regard to possible associations between rates of intravenous fluid infusion and the development of cerebral edema, the most common and most feared complication of DKA in children. Theoretical concerns about associations between osmotic fluid shifts and cerebral edema have prompted recommendations for conservative fluid infusion during DKA. However, recent data suggest that cerebral hypoperfusion may play a role in cerebral injury associated with DKA. Currently there are no existing data from prospective clinical trials to determine the optimal fluid treatment protocol for pediatric DKA. The Pediatric Emergency Care Applied Research Network FLUID (Fluid Therapies Under Investigation in DKA) Study is the first prospective randomized trial to evaluate fluid regimens for pediatric DKA. This 13-center nationwide factorial-design study will evaluate the effects of rehydration rate and fluid sodium content on neurological status during DKA treatment, the frequency of clinically-overt CE, and long-term neurocognitive outcomes following DKA. PMID:23490311

An approach to optimize sample preparation for MALDI imaging MS of FFPE sections using fractional factorial design of experiments.

PubMed

Oetjen, Janina; Lachmund, Delf; Palmer, Andrew; Alexandrov, Theodore; Becker, Michael; Boskamp, Tobias; Maass, Peter

2016-09-01

A standardized workflow for matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI imaging MS) is a prerequisite for the routine use of this promising technology in clinical applications. We present an approach to develop standard operating procedures for MALDI imaging MS sample preparation of formalin-fixed and paraffin-embedded (FFPE) tissue sections based on a novel quantitative measure of dataset quality. To cover many parts of the complex workflow and simultaneously test several parameters, experiments were planned according to a fractional factorial design of experiments (DoE). The effect of ten different experiment parameters was investigated in two distinct DoE sets, each consisting of eight experiments. FFPE rat brain sections were used as standard material because of low biological variance. The mean peak intensity and a recently proposed spatial complexity measure were calculated for a list of 26 predefined peptides obtained by in silico digestion of five different proteins and served as quality criteria. A five-way analysis of variance (ANOVA) was applied on the final scores to retrieve a ranking of experiment parameters with increasing impact on data variance. Graphical abstract MALDI imaging experiments were planned according to fractional factorial design of experiments for the parameters under study. Selected peptide images were evaluated by the chosen quality metric (structure and intensity for a given peak list), and the calculated values were used as an input for the ANOVA. The parameters with the highest impact on the quality were deduced and SOPs recommended.

Sequence Factorial and Its Applications

ERIC Educational Resources Information Center

Asiru, Muniru A.

2012-01-01

In this note, we introduce sequence factorial and use this to study generalized M-bonomial coefficients. For the sequence of natural numbers, the twin concepts of sequence factorial and generalized M-bonomial coefficients, respectively, extend the corresponding concepts of factorial of an integer and binomial coefficients. Some latent properties…

Front End and HFOFO Snake for a Muon Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Alexahin, Y.

2015-09-01

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, for neutrino factory and muon collider scenarios. They require a drift section from the target, a bunching section and amore » $$\\phi-\\delta E$$ rotation section leading into the cooling channel. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both $$\\mu^+$$ and $$\\mu^-$$ transversely and longitudinally. The status of the design is presented and variations are discussed.« less

Particle identification at an asymmetric B Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coyle, P.; Eigen, G.; Hitlin, D.

1991-09-01

Particle identification systems are an important component of any detector at a high-luminosity, asymmetric B Factory. In particular, excellent hadron identification is required to probe CP violation in B{sup 0} decays to CP eigenstates. The particle identification systems discussed below also provide help in separating leptons from hadrons at low momenta. We begin this chapter with a discussion of the physics motivation for providing particle identification, the inherent limitations due to interactions and decays in flight, and the requirements for hermiticity and angular coverage. A special feature of an asymmetric B Factory is the resulting asymmetry in the momentum distributionmore » as a function of polar angle; this will also be quantified and discussed. In the next section the three primary candidates, time-of-flight (TOF), energy loss (dE/dx), and Cerenkov counters, both ring-imaging and threshold, will be briefly described and evaluated. Following this, one of the candidates, a long-drift Cerenkov ring-imaging device, is described in detail to provide a reference design. Design considerations for a fast RICH are then described. A detailed discussion of aerogel threshold counter designs and associated R D conclude the chapter. 56 refs., 64 figs., 13 tabs.« less

Toward precision smoking cessation treatment I: Moderator results from a factorial experiment.

PubMed

Piper, Megan E; Schlam, Tanya R; Cook, Jessica W; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Collins, Linda M; Fiore, Michael C; Baker, Timothy B

2017-02-01

The development of tobacco use treatments that are effective for all smokers is critical to improving clinical and public health. The Multiphase Optimization Strategy (MOST) uses highly efficient factorial experiments to evaluate multiple intervention components for possible inclusion in an optimized tobacco use treatment. Factorial experiments permit analyses of the influence of patient characteristics on main and interaction effects of multiple, relatively discrete, intervention components. This study examined whether person-factor and smoking characteristics moderated the main or interactive effects of intervention components on 26-week self-reported abstinence rates. This fractional factorial experiment evaluated six smoking cessation intervention components among primary care patients (N=637): Prequit Nicotine Patch vs. None, Prequit Nicotine Gum vs. None, Preparation Counseling vs. None, Intensive Cessation In-Person Counseling vs. Minimal, Intensive Cessation Telephone Counseling vs. Minimal, and 16 vs. 8 Weeks of Combination Nicotine Replacement Therapy (NRT; nicotine patch+nicotine gum). Both psychiatric history and smoking heaviness moderated intervention component effects. In comparison with participants with no self-reported history of a psychiatric disorder, those with a positive history showed better response to 16- vs. 8-weeks of combination NRT, but a poorer response to counseling interventions. Also, in contrast to light smokers, heavier smokers showed a poorer response to counseling interventions. Heavy smokers and those with psychiatric histories demonstrated a differential response to intervention components. This research illustrates the use of factorial designs to examine the interactions between person characteristics and relatively discrete intervention components. Future research is needed to replicate these findings. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Designing Studies That Would Address the Multilayered Nature of Health Care

PubMed Central

Pennell, Michael; Rhoda, Dale; Hade, Erinn M.; Paskett, Electra D.

2010-01-01

We review design and analytic methods available for multilevel interventions in cancer research with particular attention to study design, sample size requirements, and potential to provide statistical evidence for causal inference. The most appropriate methods will depend on the stage of development of the research and whether randomization is possible. Early on, fractional factorial designs may be used to screen intervention components, particularly when randomization of individuals is possible. Quasi-experimental designs, including time-series and multiple baseline designs, can be useful once the intervention is designed because they require few sites and can provide the preliminary evidence to plan efficacy studies. In efficacy and effectiveness studies, group-randomized trials are preferred when randomization is possible and regression discontinuity designs are preferred otherwise if assignment based on a quantitative score is possible. Quasi-experimental designs may be used, especially when combined with recent developments in analytic methods to reduce bias in effect estimates. PMID:20386057

Design of a Communication Scheme in a Modern Factory in Accordance with the Standard of Industry 4.0

NASA Astrophysics Data System (ADS)

Halenár, Igor; Juhásová, Bohuslava; Juhás, Martin

2016-12-01

This article first describes the current state of the problem in the area of communication in modern factories. Next in the article is given a summary of the requirements that must be implemented for the possibility of establishing a compatible and safe communication system. In the final part of the article is given a proposal of communication model suitable for the implementation.

Optical design and development of near-range compact lidar

NASA Astrophysics Data System (ADS)

Shiina, Tatsuo

2011-12-01

There are large demands to monitor the atmosphere in the closed space (hall, factory and so on), to check vegetation remotely and to detect hazardous gases such as explosive gas and bio terror from explosion-proof distance. On the contrary, traditional lidars have blind area, it is hard to monitor the atmosphere and the gas in the near range. In this study, optical designs and concrete developments for the atmosphere monitoring and the certain gas detection in near range were accomplished. Unique optical designs are introduced and their practical setups are explained.

Lattice design for the CEPC double ring scheme

NASA Astrophysics Data System (ADS)

Wang, Yiwei; Su, Feng; Bai, Sha; Zhang, Yuan; Bian, Tianjian; Wang, Dou; Yu, Chenghui; Gao, Jie

2018-01-01

A future Circular Electron Positron Collider (CEPC) has been proposed by China with the main goal of studying the Higgs boson. Its baseline design, chosen on the basis of its performance, is a double ring scheme; an alternative design is a partial double ring scheme which reduces the budget while maintaining an adequate performance. This paper will present the collider ring lattice design for the double ring scheme. The CEPC will also work as a W and a Z factory. For the W and Z modes, except in the RF region, compatible lattices were obtained by scaling down the magnet strength with energy.

Does open-air exposure to volatile organic compounds near a plastic recycling factory cause health effects?

PubMed

Yorifuji, Takashi; Noguchi, Miyuki; Tsuda, Toshihide; Suzuki, Etsuji; Takao, Soshi; Kashima, Saori; Yanagisawa, Yukio

2012-01-01

After a plastic reprocessing factory began to operate in August 2004, the residents around the factory in Neyagawa, Osaka, Japan, began to complain of symptoms. Therefore, we conducted an exposure assessment and a population-based epidemiological study in 2006. To assess exposure, volatile organic compounds (VOCs) and total VOCs were measured at two locations in the vicinity of the factory. In the population-based study, a total of 3,950 residents were targeted. A self-administered questionnaire was used to collect information about subjects' mucocutaneous or respiratory symptoms. Using logistic regression models, we compared the prevalence of symptoms in July 2006 by employing the farthest area from the factory as a reference, and prevalence odds ratios (PORs) and their 95% confidence intervals (CIs) were estimated. The concentration of total VOCs was higher in the vicinity of the factory. The prevalence of mucocutaneous and respiratory symptoms was the highest among the residents in the closest area to the factory. Some symptoms were significantly increased among the residents within 500 m of the factory compared with residents of an area 2800 m from the factory: e.g., sore throat (POR=3.2, 95% CI: 1.3-8.0), eye itch (POR=3.0, 95% CI: 1.5-6.0), eye discharge (POR=6.0, 95% CI: 2.3-15.9), eczema (POR=3.0, 95% CI: 1.1-7.9) and sputum (POR=2.4, 95% CI: 1.1-5.1). Despite of the limitations of this study, these results imply a possible association of open-air VOCs with mucocutaneous and respiratory symptoms. Because this kind of plasticre cycling factory only recently came into operation, more attention should be paid to the operation of plastic recycling factories in the environment.

Evaluating the Properties of Poly(lactic-co-glycolic acid) Nanoparticle Formulations Encapsulating a Hydrophobic Drug by Using the Quality by Design Approach.

PubMed

Kozaki, Masato; Kobayashi, Shin-Ichiro; Goda, Yukihiro; Okuda, Haruhiro; Sakai-Kato, Kumiko

2017-01-01

We applied the Quality by Design (QbD) approach to the development of poly(lactic-co-glycolic acid) (PLGA) nanoparticle formulations encapsulating triamcinolone acetonide, and the critical process parameters (CPPs) were identified to clarify the correlations between critical quality attributes and CPPs. Quality risk management was performed by using an Ishikawa diagram and experiments with a fractional factorial design (ANOVA). The CPPs for particle size were PLGA concentration and rotation speed, and the CPP for relative drug loading efficiency was the poor solvent to good solvent volume ratio. By assessing the mutually related factors in the form of ratios, many factors could be efficiently considered in the risk assessment. We found a two-factor interaction between rotation speed and rate of addition of good solvent by using a fractional factorial design with resolution V. The system was then extended by using a central composite design, and the results obtained were visualized by using the response surface method to construct a design space. Our research represents a case study of the application of the QbD approach to pharmaceutical development, including formulation screening, by taking actual production factors into consideration. Our findings support the feasibility of using a similar approach to nanoparticle formulations under development. We could establish an efficient method of analyzing the CPPs of PLGA nanoparticles by using a QbD approach.

Measurement of Employability Skills on Teaching Factory Learning

NASA Astrophysics Data System (ADS)

Subekti, S.; Ana, A.

2018-02-01

Vocational High Schools as one of the educational institutions that has the responsibility in preparing skilled labors has a challenge to improve the quality of human resources as a candidate for skilled labors, to compete and survive in a changing climate of work. BPS noted an increase in the number of non-worker population (BAK) in 2015-2017 on vocational graduates as many as 564,272 people. The ability to adapt and maintain jobs in a variety of conditions is called employability skills. This study purpose to measure the development of employability skills of communication skills, problem-solving skills and teamwork skills on the implementation of teaching factory learning in SMK Negeri 1 Cibadak, THPH Skills Program on bakery competency. This research uses mixed method, with concurrent triangulation mix methods research design. Data collection techniques used interviews and questionnaires. The result shows that there are increasing students’ employability skills in communication skills, problem solving skills, and teamwork skills in teaching factory learning. Principles of learning that apply learning by doing student centering and learning arrangements such as situations and conditions in the workplace have an impact on improving student employability skills.

Optimization of factors to obtain cassava starch films with improved mechanical properties

NASA Astrophysics Data System (ADS)

Monteiro, Mayra; Oliveira, Victor; Santos, Francisco; Barros Neto, Eduardo; Silva, Karyn; Silva, Rayane; Henrique, João; Chibério, Abimaelle

2017-08-01

In this study, was investigated the optimization of the factors that significantly influenced the mechanical property improvement of cassava starch films through complete factorial design 23. The factors to be analyzed were cassava starch, glycerol and modified clay contents. A regression model was proposed by the factorial analysis, aiming to estimate the condition of the individual factors investigated in the optimum state of the mechanical properties of the biofilm, using the following statistical tool: desirability function and response surface. The response variable that delimits the improvement of the mechanical property of the biofilm is the tensile strength, such improvement is obtained by maximizing the response variable. The factorial analysis showed that the best combination of factor configurations to reach the best response was found to be: with 5g of cassava starch, 10% of glycerol and 5% of modified clay, both percentages in relation to the dry mass of starch used. In addition, the starch biofilm showing the lowest response contained 2g of cassava starch, 0% of modified clay and 30% of glycerol, and was consequently considered the worst biofilm.

Development and Optimization of Dispersible Tablet of Bacopa monnieri with Improved Functionality for Memory Enhancement.

PubMed

Thakkar, Vaishali Tejas; Deshmukh, Amol; Hingorani, Lal; Juneja, Payal; Baldaniya, Lalji; Patel, Asha; Pandya, Tosha; Gohel, Mukesh

2017-01-01

The Bacopa monnieri is traditional Ayurvedic medicine, and reported for memory-enhancing effects. The Bacoside is poorly soluble, bitter in taste and responsible for the memory enhancement action. Memory enhancer is commonly prescribed for children or elder people. Poor solubility, patient compliance and bitterness were a major driving force to develop taste masked β-cyclodextrin complex and dispersible tablets. The inclusion complex of Bacopa monnieri and β-cyclodextrin was prepared in different molar ratios of Bacopa monnieri by Co-precipitation method. Phase solubility study was conducted to evaluate the effect of β-cyclodextrin on aqueous solubility of Bacoside A. The characterization was determined by Fourier transformation infrared spectroscopy (FTIR),Differential scanning calorimetry (DSC) and X-ray diffraction study (XRD).Crospovidone and croscarmallose sodium were used as super disintigrant. The 3 2 full factorial design was adopted to investigate the influence of two superdisintegrants on the wetting time and disntegration time of the tablets. The result revels that molar ratio (1:4) of inclusion complex enhance 3-fold solubility. Full factorial design was successfully employed for the optimization of dispersible tablet of B. monnieri . The short-term accelerated stability study confirmed that high stability of B. monnieri in inclusion complex.

The ideal neutrino beams

NASA Astrophysics Data System (ADS)

Lindroos, Mats

2009-06-01

The advance in neutrino oscillation physics is driven by the availability of well characterized and high flux neutrino beams. The three present options for the next generation neutrino oscillation facility are super beams, neutrino factories and beta-beams. A super-beam is a very high intensity classical neutrino beam generated by protons impinging on a target where the neutrinos are generated by the secondary particles decaying in a tunnel down streams of the target. In a neutrino factory the neutrinos are generated from muons decaying in a storage ring with long straight sections pointing towards the detectors. In a beta-beam the neutrinos are also originating from decay in a storage ring but the decaying particles are radioactive ions rather than muons. I will in this presentation review the three options and discuss the pros and cons of each. The present joint design effort for a future high intensity neutrino oscillation in Europe within a common EU supported design study, EURONU, will also be presented. The design study will explore the physics reach, the detectors, the feasibility, the safety issues and the cost for each of the options so that the the community can take a decision on what to build when the facilities presently under exploitation and construction have to be replaced.

Removing lead from metallic mixture of waste printed circuit boards by vacuum distillation: factorial design and removal mechanism.

PubMed

Li, Xingang; Gao, Yujie; Ding, Hui

2013-10-01

The lead removal from the metallic mixture of waste printed circuit boards by vacuum distillation was optimized using experimental design, and a mathematical model was established to elucidate the removal mechanism. The variables studied in lead evaporation consisted of the chamber pressure, heating temperature, heating time, particle size and initial mass. The low-level chamber pressure was fixed at 0.1 Pa as the operation pressure. The application of two-level factorial design generated a first-order polynomial that agreed well with the data for evaporation efficiency of lead. The heating temperature and heating time exhibited significant effects on the efficiency, which was validated by means of the copper-lead mixture experiments. The optimized operating conditions within the region studied were the chamber pressure of 0.1 Pa, heating temperature of 1023 K and heating time of 120 min. After the conditions were employed to remove lead from the metallic mixture of waste printed circuit boards, the efficiency was 99.97%. The mechanism of the effects was elucidated by mathematical modeling that deals with evaporation, mass transfer and condensation, and can be applied to a wider range of metal removal by vacuum distillation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Resolution V fractional factorial design for screening of factors affecting weakly basic drugs liposomal systems.

PubMed

Nageeb El-Helaly, Sara; Habib, Basant A; Abd El-Rahman, Mohamed K

2018-07-01

This study aims to investigate factors affecting weakly basic drugs liposomal systems. Resolution V fractional factorial design (2 V 5-1 ) is used as an example of screening designs that would better be used as a wise step before proceeding with detailed factors effects or optimization studies. Five factors probable to affect liposomal systems of weakly basic drugs were investigated using Amisulpride as a model drug. Factors studied were; A: Preparation technique B: Phosphatidyl choline (PhC) amount (mg) C: Cholesterol: PhC molar ratio, D: Hydration volume (ml) and E: Sonication type. Levels investigated were; Ammonium sulphate-pH gradient technique or Transmembrane zinc chelation-pH gradient technique, 200 or 400 mg, 0 or 0.5, 10 or 20 ml and bath or probe sonication for A, B, C, D and E respectively. Responses measured were Particle size (PS) (nm), Zeta potential (ZP) (mV) and Entrapment efficiency percent (EE%). Ion selective electrode was used as a novel method for measuring unentrapped drug concentration and calculating entrapment efficiency without the need for liposomal separation. Factors mainly affecting the studied responses were Cholesterol: PhC ratio and hydration volume for PS, preparation technique for ZP and preparation technique and hydration volume for EE%. The applied 2 V 5-1 design enabled the use of only 16 trial combinations for screening the influence of five factors on weakly basic drugs liposomal systems. This clarifies the value of the use of screening experiments before extensive investigation of certain factors in detailed optimization studies. Copyright © 2018 Elsevier B.V. All rights reserved.

The Cognitive and Perceptual Laws of the Inclined Plane.

PubMed

Masin, Sergio Cesare

2016-09-01

The study explored whether laypersons correctly tacitly know Galileo's law of the inclined plane and what the basis of such knowledge could be. Participants predicted the time a ball would take to roll down a slope with factorial combination of ball travel distance and slope angle. The resulting pattern of factorial curves relating the square of predicted time to travel distance for each slope angle was identical to that implied by Galileo's law, indicating a correct cognitive representation of this law. Intuitive physics research suggests that this cognitive representation may result from memories of past perceptions of objects rolling down a slope. Such a basis and the correct cognitive representation of Galileo's law led to the hypothesis that Galileo's law is also perceptually represented correctly. To test this hypothesis, participants were asked to judge the perceived travel time of a ball actually rolling down a slope, with perceived travel distance and perceived slope angle varied in a factorial design. The obtained pattern of factorial curves was equal to that implied by Galileo's law, indicating that the functional relationships defined in this law were perceptually represented correctly. The results foster the idea that laypersons may tacitly know both linear and nonlinear multiplicative physical laws of the everyday world. As a practical implication, the awareness of this conclusion may help develop more effective methods for teaching physics and for improving human performance in the physical environment.

Combustion of liquid paint wastes in fluidized bed boiler as element of waste management system in the paint factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soko, W.A.; Biaecka, B.

1998-12-31

In this paper the solution to waste problems in the paint industry is presented by describing their combustion in a fluidized bed boiler as a part of the waste management system in the paint factory. Based on the Cleaner Production idea and concept of integration of design process with a future exploitation of equipment, some modifications of the waste management scheme in the factory are discussed to reduce the quantity of toxic wastes. To verify this concept combustion tests of paint production wastes and cocombustion of paint wastes with coal in an adopted industrial boiler were done. Results of thesemore » tests are presented in the paper.« less

D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

EPA Science Inventory

Traditional factorial designs for evaluating interactions among chemicals in a mixture are prohibitive when the number of chemicals is large. However, recent advances in statistically-based experimental design have made it easier to evaluate interactions involving many chemicals...

Task-Based Variability in Children's Singing Accuracy

ERIC Educational Resources Information Center

Nichols, Bryan E.

2016-01-01

The purpose of this study was to explore the effect of task demands on children's singing accuracy. A 2 × 4 factorial design was used to examine the performance of fourth-grade children (N = 120) in solo and doubled response conditions. Each child sang four task types: single pitch, interval, pattern, and the song "Jingle Bells." The…

Relationships among Reading Performance, Locus of Control and Achievement for Marginal Admission Students.

ERIC Educational Resources Information Center

Pepper, Roger S.; Drexler, John A., Jr.

The first phase of the study was a 2 x 2 factorial design, with locus of control and instructional method (lecture and demonstration) as independent variables and honor point average (HPA) as the dependent variable. The second phase used correlational techniques to test the extent to which reading performance and traditional predictors of…

Self Management Techniques and Disclosure of Sero Status

ERIC Educational Resources Information Center

Falaye, Ajibola; Afolayan, Joel Adeleke

2015-01-01

This study looked at using Self Management Technique (SMT) to promote self-disclosure of Sero status in Kwara State, Nigeria. A pre-test, post-test and control group quasi experimental design using a 2x2x2 factorial matrix was adopted. Sixty participants were sampled by balloting from two HIV/AIDS screening centres. Four instruments were used such…

Effects of shade and feeding zilpaterol hydrochloride to finishing steers on performance, carcass quality, mobility, and body temperature

USDA-ARS?s Scientific Manuscript database

Crossbred steers (n=480) were utilized to study the effects of shade and feeding zilpaterol hydrochloride (ZH) on performance, carcass quality, mobility, and body temperature (BT). A randomized block design with a 2×2 factorial arrangement of treatments was conducted with four replicates per treatme...

Animated and Static Concept Maps Enhance Learning from Spoken Narration

ERIC Educational Resources Information Center

Adesope, Olusola O.; Nesbit, John C.

2013-01-01

An animated concept map represents verbal information in a node-link diagram that changes over time. The goals of the experiment were to evaluate the instructional effects of presenting an animated concept map concurrently with semantically equivalent spoken narration. The study used a 2 x 2 factorial design in which an animation factor (animated…

The Dignity of Work: School Children Look at Employment.

ERIC Educational Resources Information Center

Catlett, Judith L.

1992-01-01

Presents two-week unit on work designed to move from an overview of occupations to a more in-depth study of the meaning and value of work. Describes third grade unit which featured slides, songs, poetry, and creating a student factory. Notes that activities can be adapted for other grades. Includes highly personalized learning experiences and…

Interactivity of Question Prompts and Feedback on Secondary Students' Science Knowledge Acquisition and Cognitive Load

ERIC Educational Resources Information Center

Huang, Kun; Chen, Ching-Huei; Wu, Wen-Shiuan; Chen, Wei-Yu

2015-01-01

This study investigated how question prompts and feedback influenced knowledge acquisition and cognitive load when learning Newtonian mechanics within a web-based multimedia module. Participants were one hundred eighteen 9th grade students who were randomly assigned to one of four experimental conditions, forming a 2 x 2 factorial design with the…

The Effects of Viewed Aggression on the Group Play of Children.

ERIC Educational Resources Information Center

Ross, Lee B.

The present investigation extended the methodology to investigate the effects of viewed aggression on groups of two and four children. The present study employed a 2 x 2 x 3 factorial design, using as independent variables sex of the child, group size (two or four children), and cartoon condition (aggressive cartoon, nonaggressive cartoon, and no…

L2 Fluency as Influenced by Content Familiarity and Planning: Performance, Measurement, and Pedagogy

ERIC Educational Resources Information Center

Bui, Gavin; Huang, Zeping

2018-01-01

This study investigates how second language (L2) fluency is influenced by two factors: Pre-task planning and content familiarity. Planning was adopted as a between-participant variable, combined with content familiarity as a within-participant variable, in a 2 × 2 split-plot factorial design. Nineteen measures of fluency phenomena, constituting…

Academic Achievement and Perceived Peer Support among Turkish Students: Gender and Preschool Education Impact

ERIC Educational Resources Information Center

Bursal, Murat

2017-01-01

This study was conducted to investigate the academic achievement and perceived peer support levels of 4th-8th grade Turkish elementary and middle school students at low socio-economic status. Factorial design analyses were used to test the statistical effects of gender and preschool education variables on the dependent variables. The findings…

Attitudes toward People with Disabilities Caused by Illness or Injury: Beyond Physical Impairment

ERIC Educational Resources Information Center

Shiloh, Shoshana; Heruti, Irit; Berkovitz, Tamar

2011-01-01

This study examined differences in attitudes toward and reactions to individuals with comparable disabilities caused by injury or illness. Participants were students and healthcare professionals randomly assigned to read one of eight vignettes constructed in a between-subjects, full-factorial design: 2 (illness/injury)x2 (male/female)x2…

Green tea polyphenols mitigate bone loss of female rats in a chronic inflammation-induced bone loss model

USDA-ARS?s Scientific Manuscript database

The purpose of this study was to explore bioavailability, efficacy, and molecular mechanisms of green tea polyphenols (GTP) related to preventing bone loss in rats with chronic inflammation. A 2 (placebo vs. lipopolysaccharide, LPS) × 2 (no GTP vs. 0.5% GTP in drinking water) factorial design using ...

Achievement-Based Rewards and Intrinsic Motivation: A Test of Cognitive Mediators

ERIC Educational Resources Information Center

Cameron, Judy; Pierce, W. David; Banko, Katherine M.; Gear, Amber

2005-01-01

This study assessed how rewards impacted intrinsic motivation when students were rewarded for achievement while learning an activity, for performing at a specific level on a test, or for both. Undergraduate university students engaged in a problem-solving activity. The design was a 2 * 2 factorial with 2 levels of reward in a learning phase…

The Relationship of Core Self-Evaluations and Life Satisfaction in College Students with Disabilities: Evaluation of a Mediator Model

ERIC Educational Resources Information Center

Smedema, Susan Miller; Chan, Fong; Yaghmaian, Rana A.; Cardoso, Elizabeth DaSilva; Muller, Veronica; Keegan, John; Dutta, Alo; Ebener, Deborah J.

2015-01-01

This study examined the factorial structure of the construct core self-evaluations (CSE) and tested a mediational model of the relationship between CSE and life satisfaction in college students with disabilities. We conducted a quantitative descriptive design using exploratory and confirmatory factor analysis and multiple regression analysis.…

The Influence of Hair Color on Eliciting Help: Do Blondes Have More Fun?

ERIC Educational Resources Information Center

Juni, Samuel; Roth, Michelle M.

1985-01-01

Review of the literature suggests that hair color influences the quality of interpersonal interactions. Results of a factorially designed study show that while women helped confederates equally regardless of their gender, men helped women more than they helped men. Hair color of confederates was not shown to affect helping behavior. (Author/ABB)

Treating Intractable Post Amputation Phantom Limb Pain with Ambulatory Continuous Peripheral Nerve Blocks

DTIC Science & Technology

2018-01-01

author(s) and should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation...hurricane that hit Puerto Rico this last summer knocked out the factory that makes the local anesthetic used in this study—ropivacaine—and, so our enrollment...was halted because ropivacaine cannot be purchased in the United States. It is unclear when the factory will begin producing ropivacaine again; but

Process design for microbial plastic factories: metabolic engineering of polyhydroxyalkanoates.

PubMed

Aldor, Ilana S; Keasling, Jay D

2003-10-01

Implementing several metabolic engineering strategies, either individually or in combination, it is possible to construct microbial plastic factories to produce a variety of polyhydroxyalkanoate (PHA) biopolymers with desirable structures and material properties. Approaches include external substrate manipulation, inhibitor addition, recombinant gene expression, host cell genome manipulation and, most recently, protein engineering of PHA biosynthetic enzymes. In addition, mathematical models and molecular methods can be used to elucidate metabolically engineered systems and to identify targets for performance improvement.

A new programming metaphor for image processing procedures

NASA Technical Reports Server (NTRS)

Smirnov, O. M.; Piskunov, N. E.

1992-01-01

Most image processing systems, besides an Application Program Interface (API) which lets users write their own image processing programs, also feature a higher level of programmability. Traditionally, this is a command or macro language, which can be used to build large procedures (scripts) out of simple programs or commands. This approach, a legacy of the teletypewriter has serious drawbacks. A command language is clumsy when (and if! it attempts to utilize the capabilities of a multitasking or multiprocessor environment, it is but adequate for real-time data acquisition and processing, it has a fairly steep learning curve, and the user interface is very inefficient,. especially when compared to a graphical user interface (GUI) that systems running under Xll or Windows should otherwise be able to provide. ll these difficulties stem from one basic problem: a command language is not a natural metaphor for an image processing procedure. A more natural metaphor - an image processing factory is described in detail. A factory is a set of programs (applications) that execute separate operations on images, connected by pipes that carry data (images and parameters) between them. The programs function concurrently, processing images as they arrive along pipes, and querying the user for whatever other input they need. From the user's point of view, programming (constructing) factories is a lot like playing with LEGO blocks - much more intuitive than writing scripts. Focus is on some of the difficulties of implementing factory support, most notably the design of an appropriate API. It also shows that factories retain all the functionality of a command language (including loops and conditional branches), while suffering from none of the drawbacks outlined above. Other benefits of factory programming include self-tuning factories and the process of encapsulation, which lets a factory take the shape of a standard application both from the system and the user's point of view, and thus be used as a component of other factories. A bare-bones prototype of factory programming was implemented under the PcIPS image processing system, and a complete version (on a multitasking platform) is under development.

Recovery of yttrium from fluorescent powder of cathode ray tube, CRT: Zn removal by sulphide precipitation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Innocenzi, Valentina, E-mail: valentina.innocenzi1@univaq.it; De Michelis, Ida; Ferella, Francesco

2013-11-15

Highlights: • Treatment of fluorescent powder of CRT waste. • Factorial experimental designs to study acid leaching of fluorescent powder and the purification of leach liquors. • Recover of yttrium by precipitation using oxalic acid. • Suitable flowsheet to recover yttrium from fluorescent powder. - Abstract: This work is focused on the recovery of yttrium and zinc from fluorescent powder of cathode ray tube (CRT). Metals are extracted by sulphuric acid in the presence of hydrogen peroxide. Leaching tests are carried out according to a 2{sup 2} full factorial plan and the highest extraction yields for yttrium and zinc equalmore » to 100% are observed under the following conditions: 3 M of sulphuric acid, 10% v/v of H{sub 2}O{sub 2} concentrated solution at 30% v/v, 10% w/w pulp density, 70 °C and 3 h of reaction. Two series of precipitation tests for zinc are carried out: a 2{sup 2} full factorial design and a completely randomized factorial design. In these series the factors investigated are pH of solution during the precipitation and the amount of sodium sulphide added to precipitate zinc sulphide. The data of these tests are used to describe two empirical mathematical models for zinc and yttrium precipitation yields by regression analysis. The highest precipitation yields for zinc are obtained under the following conditions: pH equal to 2–2.5% and 10–12% v/v of Na{sub 2}S concentrated solution at 10% w/v. In these conditions the coprecipitation of yttrium is of 15–20%. Finally further yttrium precipitation experiments by oxalic acid on the residual solutions, after removing of zinc, show that yttrium could be recovered and calcined to obtain the final product as yttrium oxide. The achieved results allow to propose a CRT recycling process based on leaching of fluorescent powder from cathode ray tube and recovery of yttrium oxide after removing of zinc by precipitation. The final recovery of yttrium is 75–80%.« less

Optimization of the Ion Source-Mass Spectrometry Parameters in Non-Steroidal Anti-Inflammatory and Analgesic Pharmaceuticals Analysis by a Design of Experiments Approach

NASA Astrophysics Data System (ADS)

Paíga, Paula; Silva, Luís M. S.; Delerue-Matos, Cristina

2016-10-01

The flow rates of drying and nebulizing gas, heat block and desolvation line temperatures and interface voltage are potential electrospray ionization parameters as they may enhance sensitivity of the mass spectrometer. The conditions that give higher sensitivity of 13 pharmaceuticals were explored. First, Plackett-Burman design was implemented to screen significant factors, and it was concluded that interface voltage and nebulizing gas flow were the only factors that influence the intensity signal for all pharmaceuticals. This fractionated factorial design was projected to set a full 22 factorial design with center points. The lack-of-fit test proved to be significant. Then, a central composite face-centered design was conducted. Finally, a stepwise multiple linear regression and subsequently an optimization problem solving were carried out. Two main drug clusters were found concerning the signal intensities of all runs of the augmented factorial design. p-Aminophenol, salicylic acid, and nimesulide constitute one cluster as a result of showing much higher sensitivity than the remaining drugs. The other cluster is more homogeneous with some sub-clusters comprising one pharmaceutical and its respective metabolite. It was observed that instrumental signal increased when both significant factors increased with maximum signal occurring when both codified factors are set at level +1. It was also found that, for most of the pharmaceuticals, interface voltage influences the intensity of the instrument more than the nebulizing gas flowrate. The only exceptions refer to nimesulide where the relative importance of the factors is reversed and still salicylic acid where both factors equally influence the instrumental signal.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, David; Snopok, Pavel; Alexahin, Yuri

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a Φ-δE rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both μ + and μ - transversely andmore » longitudinally. Finally, the status of the design is presented and variations are discussed.« less

Cloud-based robot remote control system for smart factory

NASA Astrophysics Data System (ADS)

Wu, Zhiming; Li, Lianzhong; Xu, Yang; Zhai, Jingmei

2015-12-01

With the development of internet technologies and the wide application of robots, there is a prospect (trend/tendency) of integration between network and robots. A cloud-based robot remote control system over networks for smart factory is proposed, which enables remote users to control robots and then realize intelligent production. To achieve it, a three-layer system architecture is designed including user layer, service layer and physical layer. Remote control applications running on the cloud server is developed on Microsoft Azure. Moreover, DIV+ CSS technologies are used to design human-machine interface to lower maintenance cost and improve development efficiency. Finally, an experiment is implemented to verify the feasibility of the program.

Dental caries experience in high risk soft drinks factory workers of South India: a comparative study.

PubMed

Kumar, Sandeep; Acharya, Shashidhar; Vasthare, Ramprasad; Singh, Siddharth Kumar; Gupta, Anjali; Debnath, Nitai

2014-01-01

The consumption of soft-drinks has been associated with dental caries development. The aim was to evaluate dental caries experience amongst the workers working in soft-drink industries located in South India and compare it with other factory workers. To evaluate the validity of specific caries index (SCI), which is newer index for caries diagnosis. This was a cross-sectional study carried out among 420 workers (210 in soft-drinks factory and 210 in other factories), in the age group of 20-45 years of Udupi district, Karnataka, India. Index used for clinical examination was decayed, missing, filled surfaces (DMFS) index and SCI. The mean and standard deviation (SD) of decayed surface (5.8 ± 1.8), missing surface (4.3 ± 2) and filled surface (1.94 ± 1.95) and total DMFS score (12.11 ± 3.8) in soft-drinks factory workers were found to be significantly higher than the other factory workers. The total SCI score (mean and SD) was found to be significantly higher in soft-drinks factory workers (5.83 ± 1.80) compared with other factory workers (4.56 ± 1.45). There was a high correlation obtained between SCI score and DMFS score. The regression equation given by DMFS = 1.178 + 1.866 (SCI scores). The caries experience was higher in workers working in soft-drinks factory and this study also showed that specific caries index can be used as a valid index for assessing dental caries experience.

Investigation of cadmium pollution in the spruce saplings near the metal production factory.

PubMed

Hashemi, Seyed Armin; Farajpour, Ghasem

2016-02-01

Toxic metals such as lead and cadmium are among the pollutants that are created by the metal production factories and disseminated in the nature. In order to study the quantity of cadmium pollution in the environment of the metal production factories, 50 saplings of the spruce species at the peripheries of the metal production factories were examined and the samples of the leaves, roots, and stems of saplings planted around the factory and the soil of the environment of the factory were studied to investigate pollution with cadmium. They were compared to the soil and saplings of the spruce trees planted outside the factory as observer region. The results showed that the quantity of pollution in the leaves, stems, and roots of the trees planted inside the factory environment were estimated at 1.1, 1.5, and 2.5 mg/kg, respectively, and this indicated a significant difference with the observer region (p < 0.05). The quantity of cadmium in the soil of the peripheries of the metal production factory was estimated at 6.8 mg/kg in the depth of 0-10 cm beneath the level of the soil. The length of roots in the saplings planted around the factory of metal production stood at 11 and 14.5 cm in the observer region which had a significant difference with the observer region (p < 0.05). The quantity of soil resources and spruce species' pollution with cadmium in the region has been influenced by the production processes in the factory. © The Author(s) 2013.

The effect of three ergonomics training programs on the prevalence of low-back pain among workers of an Iranian automobile factory: a randomized clinical trial.

PubMed

Aghilinejad, M; Bahrami-Ahmadi, A; Kabir-Mokamelkhah, E; Sarebanha, S; Hosseini, H R; Sadeghi, Z

2014-04-01

Many workers suffer from low-back pain. Type and severity of spinal complaints have relationship with work load. Lack of adherence to ergonomics recommendations among the important causes of low-back pain. To assess the effect of 3 ergonomics training programs on the prevalence of lowback pain among workers of an Iranian automobile factory. In a parallel-design 4-arm randomized clinical trial, 760 active workers of an automobile factory were studied. 503 workers were found eligible and randomized into 3 intervention groups (n=252), and a control group (n=251). The intervention groups consisted of 3 arms: 84 workers were educated by pamphlet, 84 by lectures, and 84 by workshop. Nordic questionnaire was used to determine the prevalence of spinal complaint before and 1-year after the interventions. The trial is registered with the Iranian Randomized Clinical Trial Registry, number IRCT2013061213182N2. Out of 503 workers, 52 lost to follow-up leaving 451 workers for analyses. The prevalence of low-back pain at the baseline was not significantly different among the studied arms. 1-year after the interventions, the prevalence did not change significantly from the baseline values for the lecture and pamphlet group. However, the prevalence of LBP experienced during the last year significantly (p=0.036) decreased from 42% to 23% in participant took part in the workshop. Training of automobile factory workers in ergonomics is more effective by running workshop than giving lecture or disseminating pamphlet.

Translational Research in South Africa: Evaluating Implementation Quality Using a Factorial Design

PubMed Central

Smith, Edward A.; Collins, Linda M.; Graham, John W.; Lai, Mary; Wegner, Lisa; Vergnani, Tania; Matthews, Catherine; Jacobs, Joachim

2012-01-01

Background HealthWise South Africa: Life Skills for Adolescents (HW) is an evidence-based substance use and sexual risk prevention program that emphasizes the positive use of leisure time. Since 2000, this program has evolved from pilot testing through an efficacy trial involving over 7,000 youth in the Cape Town area. Beginning in 2011, through 2015, we are undertaking a new study that expands HW to all schools in the Metro South Education District. Objective This paper describes a research study designed in partnership with our South African collaborators that examines three factors hypothesized to affect the quality and fidelity of HW implementation: enhanced teacher training; teacher support, structure and supervision; and enhanced school environment. Methods Teachers and students from 56 schools in the Cape Town area will participate in this study. Teacher observations are the primary means of collecting data on factors affecting implementation quality. These factors address the practical concerns of teachers and schools related to likelihood of use and cost-effectiveness, and are hypothesized to be “active ingredients” related to high-quality program implementation in real-world settings. An innovative factorial experimental design was chosen to enable estimation of the individual effect of each of the three factors. Results Because this paper describes the conceptualization of our study, results are not yet available. Conclusions The results of this study may have both substantive and methodological implications for advancing Type 2 translational research. PMID:22707870

Childhood leukaemia and ordnance factories in west Cumbria during the Second World War.

PubMed

Kinlen, L

2006-07-03

Much evidence has accumulated that childhood leukaemia (CL) is a rare response to a common, but unidentified, infection and in particular that situations involving the unusual mixing of urban and rural groups (approximating to, respectively, groups infected with, and susceptible to, the relevant microorganism) can produce localised epidemics with consequent increases of the infrequent leukaemic complication. During the Second World War, explosives production factories were built and operated at Drigg and Sellafield, and a shell filling factory at Bootle, in west Cumbria, England, requiring substantial numbers of construction workers to be brought into this remote and isolated area. Following the design of an earlier study of CL near large (post-war) rural construction sites, mortality from this disease was investigated with the help of the Office of National Statistics, in the area around these Cumbrian factories where local workers largely lived, during the construction period and with particular reference to the overlapping construction and operational phase when the mixing of local and migrant workers would have been greatest. An excess of leukaemia deaths at ages 1-14 was found during the construction period (observed 3; observed/expected (O/E) 2.2, 95% confidence interval (CI): 0.6, 6.0), which was more marked and statistically significant during the overlap with operations (O 3; O/E 4.5, 95% CI: 1.1, 12.2), especially at ages 1-4 (O 2; O/E 7.1, CI: 1.2, 23.6). A previous investigation did not detect this excess because it considered only a small part of west Cumbria that omitted the communities where most of the workforce lived, having incorrectly attributed the post-war expansion of the village of Seascale (situated between Drigg and Sellafield) to the wartime ordnance factories. The present findings are consistent with the results of the earlier study of rural construction projects and with the general evidence that marked rural-urban population mixing increases the risk of CL.

Childhood leukaemia and ordnance factories in west Cumbria during the Second World War

PubMed Central

Kinlen, L

2006-01-01

Much evidence has accumulated that childhood leukaemia (CL) is a rare response to a common, but unidentified, infection and in particular that situations involving the unusual mixing of urban and rural groups (approximating to, respectively, groups infected with, and susceptible to, the relevant microorganism) can produce localised epidemics with consequent increases of the infrequent leukaemic complication. During the Second World War, explosives production factories were built and operated at Drigg and Sellafield, and a shell filling factory at Bootle, in west Cumbria, England, requiring substantial numbers of construction workers to be brought into this remote and isolated area. Following the design of an earlier study of CL near large (post-war) rural construction sites, mortality from this disease was investigated with the help of the Office of National Statistics, in the area around these Cumbrian factories where local workers largely lived, during the construction period and with particular reference to the overlapping construction and operational phase when the mixing of local and migrant workers would have been greatest. An excess of leukaemia deaths at ages 1–14 was found during the construction period (observed 3; observed/expected (O/E) 2.2, 95% confidence interval (CI): 0.6, 6.0), which was more marked and statistically significant during the overlap with operations (O 3; O/E 4.5, 95% CI: 1.1, 12.2), especially at ages 1–4 (O 2; O/E 7.1, CI: 1.2, 23.6). A previous investigation did not detect this excess because it considered only a small part of west Cumbria that omitted the communities where most of the workforce lived, having incorrectly attributed the post-war expansion of the village of Seascale (situated between Drigg and Sellafield) to the wartime ordnance factories. The present findings are consistent with the results of the earlier study of rural construction projects and with the general evidence that marked rural–urban population mixing increases the risk of CL. PMID:16755299

Informing the Uninformed: Optimizing the Consent Message Using a Fractional Factorial Design

PubMed Central

Tait, Alan R.; Voepel-Lewis, Terri; Nair, Vijayan N.; Narisetty, Naveen N.; Fagerlin, Angela

2013-01-01

Objective Research information should be presented in a manner that promotes understanding. However, many parents and research subjects have difficulty understanding and making informed decisions. This study was designed to examine the effect of different communication strategies on parental understanding of research information. Participants 640 parents of children scheduled for elective surgery Design Observational study using a fractional factorial design Setting Large tertiary care children's hospital Interventions Parents were randomized to receive information about a hypothetical pain trial presented in one of 16 consent documents containing different combinations of 5 selected communication strategies (i.e., length, readability, processability [formatting], graphical display, and supplemental verbal disclosure). Main outcome measures Parents were interviewed to determine their understanding of the study elements (e.g., protocol, alternatives etc.) and their gist (main point) and verbatim (actual) understanding of the risks and benefits. Results Main effects for understanding were found for processability, readability, message length, use of graphics, and verbal discussion. Consent documents with high processability, 8th grade reading level, and graphics resulted in significantly greater gist and verbatim understanding compared with forms without these attributes (mean difference, 95% CI = 0.57, 0.26–0.88, correct responses out of 7 and 0.54, 0.20–0.88 correct responses out of 4 for gist and verbatim, respectively). Conclusions Results identified several communication strategy combinations that improved parents' understanding of research information. Adoption of these active strategies by investigators, clinicians, IRBs, and study sponsors represents a simple, practical, and inexpensive means to optimize the consent message and enhance parental, participant, and patient understanding. PMID:23700028

Lattice Commissioning Stretgy Simulation for the B Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, M.; Whittum, D.; Yan, Y.

2011-08-26

To prepare for the PEP-II turn on, we have studied one commissioning strategy with simulated lattice errors. Features such as difference and absolute orbit analysis and correction are discussed. To prepare for the commissioning of the PEP-II injection line and high energy ring (HER), we have developed a system for on-line orbit analysis by merging two existing codes: LEGO and RESOLVE. With the LEGO-RESOLVE system, we can study the problem of finding quadrupole alignment and beam position (BPM) offset errors with simulated data. We have increased the speed and versatility of the orbit analysis process by using a command filemore » written in a script language designed specifically for RESOLVE. In addition, we have interfaced the LEGO-RESOLVE system to the control system of the B-Factory. In this paper, we describe online analysis features of the LEGO-RESOLVE system and present examples of practical applications.« less

An intelligent factory-wide optimal operation system for continuous production process

NASA Astrophysics Data System (ADS)

Ding, Jinliang; Chai, Tianyou; Wang, Hongfeng; Wang, Junwei; Zheng, Xiuping

2016-03-01

In this study, a novel intelligent factory-wide operation system for a continuous production process is designed to optimise the entire production process, which consists of multiple units; furthermore, this system is developed using process operational data to avoid the complexity of mathematical modelling of the continuous production process. The data-driven approach aims to specify the structure of the optimal operation system; in particular, the operational data of the process are used to formulate each part of the system. In this context, the domain knowledge of process engineers is utilised, and a closed-loop dynamic optimisation strategy, which combines feedback, performance prediction, feed-forward, and dynamic tuning schemes into a framework, is employed. The effectiveness of the proposed system has been verified using industrial experimental results.

Polymeric nanoparticles loaded with the 3,5,3'-triiodothyroacetic acid (Triac), a thyroid hormone: factorial design, characterization, and release kinetics.

PubMed

Dos Santos, Karen C; da Silva, Maria Fatima Gf; Pereira-Filho, Edenir R; Fernandes, Joao B; Polikarpov, Igor; Forim, Moacir R

2012-01-01

This present investigation deals with the development and optimization of polymeric nanoparticle systems loaded with 3,5,3'-triiodothyroacetic acid (Triac). A 2(11-6) fractional factorial design and another 2(2) factorial design were used to study the contrasts on particle size distribution, morphology, surface charge, drug content, entrapment efficiency, and in vitro drug release profiles. The independent variables were the concentration of Triac, type and quantity of both polymer and oil, quantity of Span™ 60 and Tween® 80, volume of solvent and water, and velocity of both magnetic stirring and the transfer of the organic phase into the aqueous solution. The results of optimized formulations showed a narrow size distribution with a polydispersity index lower than 0.200. The particle sizes were on average 159.6 nm and 285.6 nm for nanospheres and nanocapsules, respectively. The zeta potential was higher than 20 mV (in module) and the entrapment efficiency was nearly 100%. A high-performance liquid chromatography method was developed, validated, and efficiently applied to Triac quantification in colloidal suspension. The main independent variables were the type and quantity of the polymer and oil. In vitro drug release profile depicted several features to sustain Triac release. Different formulations showed various release rates indicating an interaction between Triac and other formulation compounds such as polymer and/or oil quantity. Two different models were identified (biexponential and monoexponential) that allowed the control of both the release rate and Triac concentration. Thus, the prepared nanoparticles described here may be of clinical importance in delivering Triac for thyroid treatment.

Novel Solid Lipid Nanocarrier Of Glibenclamide: A Factorial Design Approach With Response Surface Methodology.

PubMed

Pandey, Sonia; Patel, Payal; Gupta, Arti

2018-05-21

In the present investigation a factorial design approach attempt was applied to develop the solid lipid nanoparticles (SLN) of Glibenclamide (GLB) a poorly water-soluble drug (BCS -II) used in the treatment of type 2 diabetes. Prime objectives of this experiment are to optimize the SLN formulation of Glibenclamide and improve the therapeutic effectiveness of the developed formulation. Glibenclamide loaded SLNs (GLB-SLN) were fabricated by High speed homogenization technique. A 32-factorial design approach has been employed to assess the influence of two independent variables, namely amount of Poloxamer 188 and Glyceryl Monostearate on entrapment efficiency (% EE) (Y1), Particle Size (nm) (Y2), % drug release at 8hr Q8 (Y3) and 24 hr Q24 (Y4) of prepared SLNs. Differential scanning calorimetry analysis revealed the compatibility of the drug into lipid matrix with surfactant, while Transmission electron and Scanning electron microscopy studies indicated the size and shape of SLN. The entrapment efficiency, particle size, Q8 and Q24 of the optimized SLNs were 88.93%, 125 nm, 31.12±0.951% and 86.07±1.291% respectively. Optimized GLB-SLN formula was derived from an overlay plot. Three dimensional response surface plots and regression equations confirmed the corresponding influence of selected independent variables on measured responses. In vivo testing of the GLB-SLN in diabetic albino rats demonstrated significant antidiabetic effect of GLB-SLN. The hypoglycemic effect obtained by GLB-SLN remained significantly higher than that given by drug alone and marketed formulation, further confirming the higher therapeutic effectiveness of the GLB-SLN formulation. Our findings suggested the feasibility of investigated system for oral administration of Glibenclamide. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Attentional Performance in Children and Adolescents with Tic Disorder and Co-Occurring Attention-Deficit/hyperactivity Disorder: New Insights from a 2 x 2 Factorial Design Study

ERIC Educational Resources Information Center

Greimel, Ellen; Wanderer, Sina; Rothenberger, Aribert; Herpertz-Dahlmann, Beate; Konrad, Kerstin; Roessner, Veit

2011-01-01

The aim of the present study was to investigate the effect of both tic disorder (TD) and attention-deficit/hyperactivity disorder (ADHD) on attentional functions. N = 96 children and adolescents participated in the study, including n = 21 subjects with TD, n = 23 subjects with ADHD, n = 25 subjects with TD+ADHD, and n = 27 controls. Attentional…

Effect of Educational Agent and Its Form Characteristics on Problem Solving Ability Perception of Students in Online Task Based Learning Media

ERIC Educational Resources Information Center

Akyuz, Halil Ibrahim; Keser, Hafize

2015-01-01

The aim of this study is to investigate the effect of an educational agent, used in online task based learning media, and its form characteristics on problem solving ability perceptions of students. 2x2 factorial design is used in this study. The first study factor is the role of the educational agent and the second factor is form characteristics…

Computers in Manufacturing.

ERIC Educational Resources Information Center

Hudson, C. A.

1982-01-01

Advances in factory computerization (computer-aided design and computer-aided manufacturing) are reviewed, including discussions of robotics, human factors engineering, and the sociological impact of automation. (JN)

Total fume and metal concentrations during welding in selected factories in Jeddah, Saudi Arabia.

PubMed

Balkhyour, Mansour Ahmed; Goknil, Mohammad Khalid

2010-07-01

Welding is a major industrial process used for joining metals. Occupational exposure to welding fumes is a serious occupational health problem all over the world. The degree of risk to welder's health from fumes depends on composition, concentration, and the length of exposure. The aim of this study was to investigate workers' welding fume exposure levels in some industries in Jeddah, Saudi Arabia. In each factory, the air in the breathing zone within 0.5 m from welders was sampled during 8-hour shifts. Total particulates, manganese, copper, and molybdenum concentrations of welding fumes were determined. Mean values of eight-hour average particulate concentrations measured during welding at the welders breathing zone were 6.3 mg/m(3) (Factory 1), 5.3 mg/m(3) (Factory 2), 11.3 mg/m(3) (Factory 3), 6.8 mg/m(3) (Factory 4), 4.7 mg/m(3) (Factory 5), and 3.0 mg/m(3) (Factory 6). Mean values of airborne manganese, copper, and molybdenum levels measured during welding were in the range of 0.010 mg/m(3)-0.477 mg/m(3), 0.001 mg/m(3)-0.080 mg/m(3) and 0.001 mg/m(3)-0.058 mg/m(3) respectively. Mean values of calculated equivalent exposure values were: 1.50 (Factory 1), 1.56 (Factory 2), 5.14 (Factory 3), 2.21 (Factory 4), 2.89 (Factory 5), and 1.20 (Factory 6). The welders in factories 1, 2, 3, and 4 were exposed to welding fume concentration above the SASO limit value, which may increase the risk of respiratory health problems.

Computer experimental analysis of the CHP performance of a 100 kW e SOFC Field Unit by a factorial design

NASA Astrophysics Data System (ADS)

Calì, M.; Santarelli, M. G. L.; Leone, P.

Gas Turbine Technologies (GTT) and Politecnico di Torino, both located in Torino (Italy), have been involved in the design and installation of a SOFC laboratory in order to analyse the operation, in cogenerative configuration, of the CHP 100 kW e SOFC Field Unit, built by Siemens-Westinghouse Power Corporation (SWPC), which is at present (May 2005) starting its operation and which will supply electric and thermal power to the GTT factory. In order to take the better advantage from the analysis of the on-site operation, and especially to correctly design the scheduled experimental tests on the system, we developed a mathematical model and run a simulated experimental campaign, applying a rigorous statistical approach to the analysis of the results. The aim of this work is the computer experimental analysis, through a statistical methodology (2 k factorial experiments), of the CHP 100 performance. First, the mathematical model has been calibrated with the results acquired during the first CHP100 demonstration at EDB/ELSAM in Westerwoort. After, the simulated tests have been performed in the form of computer experimental session, and the measurement uncertainties have been simulated with perturbation imposed to the model independent variables. The statistical methodology used for the computer experimental analysis is the factorial design (Yates' Technique): using the ANOVA technique the effect of the main independent variables (air utilization factor U ox, fuel utilization factor U F, internal fuel and air preheating and anodic recycling flow rate) has been investigated in a rigorous manner. Analysis accounts for the effects of parameters on stack electric power, thermal recovered power, single cell voltage, cell operative temperature, consumed fuel flow and steam to carbon ratio. Each main effect and interaction effect of parameters is shown with particular attention on generated electric power and stack heat recovered.

Comparison of accelerator physics issues for symmetric and asymmetric B-factory rings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tigner, M.

1990-10-10

A systematic comparison of accelerator physics issues from the beam-beam interaction to single particle stability including ring and IR layout, synchrotron radiation and lost particle backgrounds, and single and multi-bunch instabilities is given. While some practical handicap probably accrues to the asymmetric design because of its extra constraints, the differences in the two approaches tend to be obscured by larger issues such as how to achieve the enormous increases in luminosity demanded of a b-factory.

Study protocol for a cluster randomised controlled factorial design trial to assess the effectiveness and feasibility of reactive focal mass drug administration and vector control to reduce malaria transmission in the low endemic setting of Namibia

PubMed Central

Medzihradsky, Oliver F; Kleinschmidt, Immo; Mumbengegwi, Davis; Roberts, Kathryn W; McCreesh, Patrick; Dufour, Mi-Suk Kang; Uusiku, Petrina; Katokele, Stark; Bennett, Adam; Smith, Jennifer; Sturrock, Hugh; Prach, Lisa M; Ntuku, Henry; Tambo, Munyaradzi; Didier, Bradley; Greenhouse, Bryan; Gani, Zaahira; Aerts, Ann; Gosling, Roly; Hsiang, Michelle S

2018-01-01

Introduction To interrupt malaria transmission, strategies must target the parasite reservoir in both humans and mosquitos. Testing of community members linked to an index case, termed reactive case detection (RACD), is commonly implemented in low transmission areas, though its impact may be limited by the sensitivity of current diagnostics. Indoor residual spraying (IRS) before malaria season is a cornerstone of vector control efforts. Despite their implementation in Namibia, a country approaching elimination, these methods have been met with recent plateaus in transmission reduction. This study evaluates the effectiveness and feasibility of two new targeted strategies, reactive focal mass drug administration (rfMDA) and reactive focal vector control (RAVC) in Namibia. Methods and analysis This is an open-label cluster randomised controlled trial with 2×2 factorial design. The interventions include: rfMDA (presumptive treatment with artemether-lumefantrine (AL)) versus RACD (rapid diagnostic testing and treatment using AL) and RAVC (IRS with Acellic 300CS) versus no RAVC. Factorial design also enables comparison of the combined rfMDA+RAVC intervention to RACD. Participants living in 56 enumeration areas will be randomised to one of four arms: rfMDA, rfMDA+RAVC, RACD or RACD+RAVC. These interventions, triggered by index cases detected at health facilities, will be targeted to individuals residing within 500 m of an index. The primary outcome is cumulative incidence of locally acquired malaria detected at health facilities over 1 year. Secondary outcomes include seroprevalence, infection prevalence, intervention coverage, safety, acceptability, adherence, cost and cost-effectiveness. Ethics and dissemination Findings will be reported on clinicaltrials.gov, in peer-reviewed publications and through stakeholder meetings with MoHSS and community leaders in Namibia. Trial registration number NCT02610400; Pre-results. PMID:29374672

Study protocol for a cluster randomised controlled factorial design trial to assess the effectiveness and feasibility of reactive focal mass drug administration and vector control to reduce malaria transmission in the low endemic setting of Namibia.

PubMed

Medzihradsky, Oliver F; Kleinschmidt, Immo; Mumbengegwi, Davis; Roberts, Kathryn W; McCreesh, Patrick; Dufour, Mi-Suk Kang; Uusiku, Petrina; Katokele, Stark; Bennett, Adam; Smith, Jennifer; Sturrock, Hugh; Prach, Lisa M; Ntuku, Henry; Tambo, Munyaradzi; Didier, Bradley; Greenhouse, Bryan; Gani, Zaahira; Aerts, Ann; Gosling, Roly; Hsiang, Michelle S

2018-01-27

To interrupt malaria transmission, strategies must target the parasite reservoir in both humans and mosquitos. Testing of community members linked to an index case, termed reactive case detection (RACD), is commonly implemented in low transmission areas, though its impact may be limited by the sensitivity of current diagnostics. Indoor residual spraying (IRS) before malaria season is a cornerstone of vector control efforts. Despite their implementation in Namibia, a country approaching elimination, these methods have been met with recent plateaus in transmission reduction. This study evaluates the effectiveness and feasibility of two new targeted strategies, reactive focal mass drug administration (rfMDA) and reactive focal vector control (RAVC) in Namibia. This is an open-label cluster randomised controlled trial with 2×2 factorial design. The interventions include: rfMDA (presumptive treatment with artemether-lumefantrine (AL)) versus RACD (rapid diagnostic testing and treatment using AL) and RAVC (IRS with Acellic 300CS) versus no RAVC. Factorial design also enables comparison of the combined rfMDA+RAVC intervention to RACD. Participants living in 56 enumeration areas will be randomised to one of four arms: rfMDA, rfMDA+RAVC, RACD or RACD+RAVC. These interventions, triggered by index cases detected at health facilities, will be targeted to individuals residing within 500 m of an index. The primary outcome is cumulative incidence of locally acquired malaria detected at health facilities over 1 year. Secondary outcomes include seroprevalence, infection prevalence, intervention coverage, safety, acceptability, adherence, cost and cost-effectiveness. Findings will be reported on clinicaltrials.gov, in peer-reviewed publications and through stakeholder meetings with MoHSS and community leaders in Namibia. NCT02610400; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Use of an embedded, micro-randomised trial to investigate non-compliance in telehealth interventions.

PubMed

Law, Lisa M; Edirisinghe, Nuwani; Wason, James Ms

2016-08-01

Many types of telehealth interventions rely on activity from the patient in order to have a beneficial effect on their outcome. Remote monitoring systems require the patient to record regular measurements at home, for example, blood pressure, so clinicians can see whether the patient's health changes over time and intervene if necessary. A big problem in this type of intervention is non-compliance. Most telehealth trials report compliance rates, but they rarely compare compliance among various options of telehealth delivery, of which there may be many. Optimising telehealth delivery is vital for improving compliance and, therefore, clinical outcomes. We propose a trial design which investigates ways of improving compliance. For efficiency, this trial is embedded in a larger trial for evaluating clinical effectiveness. It employs a technique called micro-randomisation, where individual patients are randomised multiple times throughout the study. The aims of this article are (1) to verify whether the presence of an embedded secondary trial still allows valid analysis of the primary research and (2) to demonstrate the usefulness of the micro-randomisation technique for comparing compliance interventions. Simulation studies were used to simulate a large number of clinical trials, in which no embedded trial was used, a micro-randomised embedded trial was used, and a factorial embedded trial was used. Each simulation recorded the operating characteristics of the primary and secondary trials. We show that the type I error rate of the primary analysis was not affected by the presence of an embedded secondary trial. Furthermore, we show that micro-randomisation is superior to a factorial design as it reduces the variation caused by within-patient correlation. It therefore requires smaller sample sizes - our simulations showed a requirement of 128 patients for a micro-randomised trial versus 760 patients for a factorial design, in the presence of within-patient correlation. We believe that an embedded, micro-randomised trial is a feasible technique that can potentially be highly useful in telehealth trials. © The Author(s) 2016.

Comparative Effectiveness of Motivation Phase Intervention Components for Use with Smokers Unwilling to Quit: A Factorial Screening Experiment

PubMed Central

Cook, Jessica W.; Collins, Linda M.; Fiore, Michael C.; Smith, Stevens S.; Fraser, David; Bolt, Daniel M.; Baker, Timothy B.; Piper, Megan E.; Schlam, Tanya R.; Jorenby, Douglas; Loh, Wei-Yin; Mermelstein, Robin

2015-01-01

Aims To screen promising intervention components designed to reduce smoking and promote abstinence in smokers initially unwilling to quit. Design A balanced, 4-factor, randomized factorial experiment. Setting Eleven primary care clinics in southern Wisconsin, USA. Participants 517 adult smokers (63% women, 91% White) recruited during primary care visits who were willing to reduce their smoking but not quit. Interventions Four factors contrasted intervention components designed to reduce smoking and promote abstinence: 1) nicotine patch vs. none; 2) nicotine gum vs. none; 3) motivational interviewing (MI) vs. none; and 4) behavioral reduction counseling (BR) vs. none. Participants could request cessation treatment at any point during the study. Measurements The primary outcome was percent change in cigarettes smoked per day at 26 weeks post-study enrollment; the secondary outcomes were percent change at 12 weeks and point-prevalence abstinence at 12 and 26 weeks post-study enrollment. Findings There were few main effects, but a significant 4-way interaction at 26-weeks post-study enrollment (p=.01, β = .12) revealed relatively large smoking reductions by two component combinations: nicotine gum combined with BR and BR combined with MI. Further, BR improved 12-week abstinence rates (p=.04), and nicotine gum, when used without MI, increased abstinence after a subsequent aided quit attempt (p=.01). Conclusions Motivation-phase nicotine gum and behavioral reduction counseling are promising intervention components for smokers who are initially unwilling to quit. PMID:26582140

Effect of extended physiotherapy and high-dose vitamin D on rate of falls and hospital re-admission after acute hip fracture: a randomized controlled trial

USDA-ARS?s Scientific Manuscript database

Guidelines for post-fracture care of elderly hip fracture patients are not established despite the significant socio-economic burden of post hip fracture morbidity and mortality. Using a factorial design, we studied the effects of extended physiotherapy (supervised 1 hour per day during acute care p...

The Math Essential Skills Screener--Upper Elementary Version (MESS-U): Studies of Reliability and Validity

ERIC Educational Resources Information Center

Erford, Bradley T.; Biddison, Amanda R.

2006-01-01

The Math Essential Skills Screener--Upper Elementary Version (MESS-U) is part of a series of screening tests designed to help identify students ages 9-11 who are at risk for mathematics failure. Internal consistency, test-retest reliability, item analysis, decision efficiency, convergent validity and factorial validity of the MESS-U were studied…

Effects of shade and feeding zilpaterol hydrochloride to finishing steers on performance, carcass quality, heat stress, mobility, and body temperature

USDA-ARS?s Scientific Manuscript database

Steers (n = 480) were used to study the effects of shade and feeding zilpaterol hydrochloride (ZH) on performance, carcass quality, heat stress, mobility, and body temperature (BT). A randomized block design with a 2 × 2 factorial arrangement of treatments was used with 4 replicates per treatment. F...

An Analysis of Adult-Child Interaction Patterns in Three-Generational Black Families.

ERIC Educational Resources Information Center

Wilson, Melvin N.; Tolson, Timothy F. J.

This report describes results of contingency-table analyses conducted on four types of black families. Eight families from a sample of 30 families who had been filmed on four occasions during evening meals are discussed as case studies. Two families chosen from each cell of a 2 x 2 factorial design consisting of family structure (one versus two…

A Mindful Approach to Teaching Emotional Intelligence to Undergraduate Students Online and in Person

ERIC Educational Resources Information Center

Cotler, Jami L.; DiTursi, Dan; Goldstein, Ira; Yates, Jeff; DelBelso, Deb

2017-01-01

In this paper we examine whether emotional intelligence (EI) can be taught online and, if so, what key variables influence the successful implementation of this online learning model. Using a 3 x 2 factorial quasi-experimental design, this mixed-methods study found that a team-based learning environment using a blended teaching approach, supported…

The Impact of an Academic Integrity Module and Turnitin® on Similarity Index Scores of Undergraduate Student Papers

ERIC Educational Resources Information Center

Ballard, Iva B.

2013-01-01

In this quasi-experimental 2 x 2 factorial design study, the impact of an academic integrity module and Turnitin® on undergraduate student similarity index scores was investigated. Similarity index scores were used to measure suggested plagiarism rates of student papers. A purposive sample consisting of 96 undergraduate education students enrolled…

The Effects of Visual Thinking Strategies on Reading Achievement of Students with Varying Levels of Motivation

ERIC Educational Resources Information Center

Zelvis, Rima R.

2008-01-01

This study examined the effects of the Visual Thinking Strategies (VTS) curriculum on reading achievement of students with various motivational levels. A 2X2 factorial design was used. The sample population consisted of 104 fourth grade students from an upper middle class school system in Connecticut. All students were administered a…

Children's Reactions to Television Advertising for Toys.

ERIC Educational Resources Information Center

Gorn, Gerald J.; Goldberg, Marvin E.

This study investigated both the effects of expectancy and TV commercials using an expectancy-value model. In a 3 x 5 factorial design, eight- to ten-year-old boys (N=133) were presented with low, moderate or high expectancies of winning a toy, followed by exposure to 0, 1 or 3 repetitions of a TV commercial for the toy. High expectancy led to…

Comparing effects of fire modeling methods on simulated fire patterns and succession: a case study in the Missouri Ozarks

Treesearch

Jian Yang; Hong S. He; Brian R. Sturtevant; Brian R. Miranda; Eric J. Gustafson

2008-01-01

We compared four fire spread simulation methods (completely random, dynamic percolation. size-based minimum travel time algorithm. and duration-based minimum travel time algorithm) and two fire occurrence simulation methods (Poisson fire frequency model and hierarchical fire frequency model) using a two-way factorial design. We examined these treatment effects on...

Effects of Comparison and Game-Challenge on Sixth Graders' Algebra Variable Learning Achievement, Learning Attitude, and Meta-Cognitive Awareness

ERIC Educational Resources Information Center

Sun Lin, Hong-Zheng; Chiou, Guey-Fa

2017-01-01

This study examined the effects of comparison and game-challenge strategies on sixth graders' learning achievement of algebra variable, learning attitude towards algebra variable learning, and meta-cognitive awareness of algebra variable learning. A 2 × 2 factorial design was used, and 86 students were invited to participate in the experimental…

Improving Junior High School Students' Mathematical Analogical Ability Using Discovery Learning Method

ERIC Educational Resources Information Center

Maarif, Samsul

2016-01-01

The aim of this study was to identify the influence of discovery learning method towards the mathematical analogical ability of junior high school's students. This is a research using factorial design 2x2 with ANOVA-Two ways. The population of this research included the entire students of SMPN 13 Jakarta (State Junior High School 13 of Jakarta)…

Production of fructanase by a wild strain of Saccharomyces cerevisiae on tequila agave fructan.

PubMed

Corona-González, R I; Pelayo-Ortiz, C; Jacques, G; Guatemala, G; Arriola, E; Arias, J A; Toriz, G

2015-01-01

A new wild strain of Saccharomyces cerevisiae (CF3) isolated from tequila must was evaluated for production of fructanase on Agave tequilana Weber fructan (FT). Fructanase activity (F) was assessed by a 3(3) factorial design (substrate, temperature and pH). High enzymatic activity (31.1 U/ml) was found at 30 °C, pH 5, using FT (10 g/l) as substrate. The effect of initial substrate concentration on F (FT0, 5.7-66 g/l) was studied and it was found that F was highest (44.8 U/ml) at FT0 25 g/l. A 2(2) factorial experimental design with five central points was utilized to study the effect of stirring and aeration on fructanase activity; stirring exhibited a stronger effect on F. The ratio fructanase to invertase (F/S) was 0.57, which confirms that the enzymes are fructanase. Crude fructanase reached high substrate hydrolysis (48 wt%) in 10 h. It is shown that S. cerevisiae CF3 was able to produce large amounts of fructanase by growing it on fructan from A. tequilana.

Ultrasound-assisted extraction for total sulphur measurement in mine tailings.

PubMed

Khan, Adnan Hossain; Shang, Julie Q; Alam, Raquibul

2012-10-15

A sample preparation method for percentage recovery of total sulphur (%S) in reactive mine tailings based on ultrasound-assisted digestion (USAD) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) was developed. The influence of various methodological factors was screened by employing a two-level and three-factor (2(3)) full factorial design and using KZK-1, a sericite schist certified reference material (CRM), to find the optimal combination of studied factors and %S. Factors such as the sonication time, temperature and acid combination were studied, with the best result identified as 20 min of sonication, 80°C temperature and 1 ml of HNO(3):1 ml of HCl, which can achieve 100% recovery for the selected CRM. Subsequently a fraction of the 2(3) full factorial design was applied to mine tailings. The percentage relative standard deviation (%RSD) for the ultrasound method is less than 3.0% for CRM and less than 6% for the mine tailings. The investigated method was verified by X-ray diffraction analysis. The USAD method compared favorably with existing methods such as hot plate assisted digestion method, X-ray fluorescence and LECO™-CNS method. Copyright © 2012 Elsevier B.V. All rights reserved.

Pediatric diabetic ketoacidosis, fluid therapy, and cerebral injury: the design of a factorial randomized controlled trial.

PubMed

Glaser, Nicole S; Ghetti, Simona; Casper, T Charles; Dean, J Michael; Kuppermann, Nathan

2013-09-01

Treatment protocols for pediatric diabetic ketoacidosis (DKA) vary considerably among centers in the USA and worldwide. The optimal protocol for intravenous (IV) fluid administration is an area of particular controversy, mainly in regard to possible associations between rates of IV fluid infusion and the development of cerebral edema (CE), the most common and the most feared complication of DKA in children. Theoretical concerns about associations between osmotic fluid shifts and CE have prompted recommendations for conservative fluid infusion during DKA. However, recent data suggest that cerebral hypoperfusion may play a role in cerebral injury associated with DKA. Currently, there are no existing data from prospective clinical trials to determine the optimal fluid treatment protocol for pediatric DKA. The Pediatric Emergency Care Applied Research Network FLUID (FLuid therapies Under Investigation in DKA) study is the first prospective randomized trial to evaluate fluid regimens for pediatric DKA. This 13-center nationwide factorial design study will evaluate the effects of rehydration rate and fluid sodium content on neurological status during DKA treatment, the frequency of clinically overt CE and long-term neurocognitive outcomes following DKA. © 2013 John Wiley & Sons A/S.

The Walking Interventions Through Texting (WalkIT) Trial: Rationale, Design, and Protocol for a Factorial Randomized Controlled Trial of Adaptive Interventions for Overweight and Obese, Inactive Adults.

PubMed

Hurley, Jane C; Hollingshead, Kevin E; Todd, Michael; Jarrett, Catherine L; Tucker, Wesley J; Angadi, Siddhartha S; Adams, Marc A

2015-09-11

Walking is a widely accepted and frequently targeted health promotion approach to increase physical activity (PA). Interventions to increase PA have produced only small improvements. Stronger and more potent behavioral intervention components are needed to increase time spent in PA, improve cardiometabolic risk markers, and optimize health. Our aim is to present the rationale and methods from the WalkIT Trial, a 4-month factorial randomized controlled trial (RCT) in inactive, overweight/obese adults. The main purpose of the study was to evaluate whether intensive adaptive components result in greater improvements to adults' PA compared to the static intervention components. Participants enrolled in a 2x2 factorial RCT and were assigned to one of four semi-automated, text message-based walking interventions. Experimental components included adaptive versus static steps/day goals, and immediate versus delayed reinforcement. Principles of percentile shaping and behavioral economics were used to operationalize experimental components. A Fitbit Zip measured the main outcome: participants' daily physical activity (steps and cadence) over the 4-month duration of the study. Secondary outcomes included self-reported PA, psychosocial outcomes, aerobic fitness, and cardiorespiratory risk factors assessed pre/post in a laboratory setting. Participants were recruited through email listservs and websites affiliated with the university campus, community businesses and local government, social groups, and social media advertising. This study has completed data collection as of December 2014, but data cleaning and preliminary analyses are still in progress. We expect to complete analysis of the main outcomes in late 2015 to early 2016. The Walking Interventions through Texting (WalkIT) Trial will further the understanding of theory-based intervention components to increase the PA of men and women who are healthy, insufficiently active and are overweight or obese. WalkIT is one of the first studies focusing on the individual components of combined goal setting and reward structures in a factorial design to increase walking. The trial is expected to produce results useful to future research interventions and perhaps industry initiatives, primarily focused on mHealth, goal setting, and those looking to promote behavior change through performance-based incentives. ClinicalTrials.gov NCT02053259; https://clinicaltrials.gov/ct2/show/NCT02053259 (Archived by WebCite at http://www.webcitation.org/6b65xLvmg).

Factorial Validity and Invariance Testing of the Exercise Dependence Scale-Revised in Swedish and Portuguese Exercisers

ERIC Educational Resources Information Center

Lindwall, Magnus; Palmeira, Antonio

2009-01-01

The present study investigated the factorial validity and factorial invariance of the 21-item Exercise Dependence Scale-Revised using 162 Swedish and 269 Portuguese exercisers. In addition, the prevalence of exercise dependence symptoms and links to exercise behavior, gender, and age in the two samples was also studied. Confirmatory factor…

Effect of Temperature, Precursor Type and Dripping Time on the Crystallite Size of Nano ZnO Obtained by One-Pot Synthesis: 2 k Full Factorial Design Analysis.

PubMed

Machado, Morgana de Medeiros; Savi, Bruna Martinello; Perucchi, Mariana Borges; Benedetti, Alessandro; Oliveira, Luis Felipe Silva; Bernardin, Adriano Michael

2018-06-01

The aim of this work was to determine the effect of temperature, precursor and dripping time on the crystallite size of ZnO nanoparticles synthesized by controlled precipitation according a 2k full factorial design. ZnCl2, Zn(NO3)2 and NaOH were used as precursors. After synthesis, the nano crystalline powder was characterized by XRD (Cu Kα), UV-Vis, and HR-TEM. The nano ZnO particles presented a crystallite size between 210 and 260 Å (HR-TEM and XRD). The results show that the crystallite size depends on the type of precursor and temperature of synthesis, but not on the dripping time.

Formulation design of a highly hygroscopic drug (pyridostigmine bromide) for its hygroscopic character improvement and investigation of in vitro/in vivo dissolution properties.

PubMed

Huang, Yuh-Tyng; Tsai, Tong-Rong; Cheng, Chun-Jen; Cham, Thau-Ming; Lai, Tsun-Fwu; Chuo, Wen-Ho

2007-04-01

Pyridostigmine bromide (PB) sustained-release (SR) pellets were developed by extrusion-spheronization and fluid-bed methods using Taguchi experimental and 2(3) full factorial design. In vitro studies, the 2(3) full factorial design was utilized to search for the optimal SR pellets with specific release rate at different time intervals (release percent of 2, 6, 12, and 24 hr were 6.24, 33.48, 75.18, and 95.26%, respectively) which followed a zero-order mechanism (n=0.93). The results of moisture absorption by Karl Fischer has shown the optimum SR pellets at 25 degrees C/60% RH, 30 degrees C/65% RH, and 40 degrees C/75% RH chambers from 1 hr-4 weeks, attributing that the moisture absorption was not significantly increased. In the in vivo study, the results of the bioavailability data showed the Tmax (from 0.65+/-0.082 hr-4.82+/-2.12 hr) and AUC0-30 hr (from 734.88+/-230.68 ng/mL.hr-1454.86+/-319.28 ng/mL.hr) were prolonged and increased, as well as Cmax (from 251.87+/-27.51 ng/mL-115.08+/-14.87 ng/mL) was decreased for optimum SR-PB pellets when compared with commercial immediate-release (IR) tablets. Furthermore, a good linear regression relationship (r=0.9943) was observed between the fraction dissolution and fraction absorption for the optimum SR pellets. In this study, the formulation design not only improved the hygroscopic character of PB but also achieved the SR effect.

Torsemide Fast Dissolving Tablets: Development, Optimization Using Box-Bhenken Design and Response Surface Methodology, In Vitro Characterization, and Pharmacokinetic Assessment.

PubMed

El-Shenawy, Ahmed A; Ahmed, Mahmoud M; Mansour, Heba F; Abd El Rasoul, Saleh

2017-08-01

The present study planed to develop new fast dissolving tablets (FDTs) of torsemide. Solid dispersions (SDs) of torsemide and sorbitol (3:1) or polyvinylpyrrolidone (PVP) k25 were prepared. The prepared SDs were evaluated for in-vitro dissolution. Fourier transform infrared spectroscopy and differential scanning calorimetry for SDs revealed no drug/excipient interactions and transformation of torsemide to the amorphous form. Torsemide/sorbitol SD was selected for formulation of torsemide FDTs by direct compression method. Box-Bhenken factorial design was employed to design 15 formulations using croscarmellose sodium and crospovidone at different concentrations. The response surface methodology was used to analyze the effect of changing these concentrations (independent variables) on disintegration time (Y 1 ), percentage friability (Y 2 ), and amount torsemide released at 10 min. The physical mixtures of torsemide and the used excipients were evaluated for angle of repose, Hausner's ratio, and Carr's index. The prepared FDTs tablets were evaluated for wetting and disintegration time, weight variation, drug content, percentage friability, thickness, hardness, and in vitro release. Based on the in-vitro results and factorial design characterization, F10 and F7 were selected for bioavailability studies following administration to Albino New Zealand rabbits. They showed significantly higher C max and (AUC 0-12 ) and shorter T max than those obtained after administration of the corresponding ordinary commercial Torseretic ® tablets. Stability study was conducted for F10 that showed good stability upon storage at 30°C/75% RH and 40°C/75% RH for 3 months.

Optimization of the Ion Source-Mass Spectrometry Parameters in Non-Steroidal Anti-Inflammatory and Analgesic Pharmaceuticals Analysis by a Design of Experiments Approach.

PubMed

Paíga, Paula; Silva, Luís M S; Delerue-Matos, Cristina

2016-10-01

The flow rates of drying and nebulizing gas, heat block and desolvation line temperatures and interface voltage are potential electrospray ionization parameters as they may enhance sensitivity of the mass spectrometer. The conditions that give higher sensitivity of 13 pharmaceuticals were explored. First, Plackett-Burman design was implemented to screen significant factors, and it was concluded that interface voltage and nebulizing gas flow were the only factors that influence the intensity signal for all pharmaceuticals. This fractionated factorial design was projected to set a full 2(2) factorial design with center points. The lack-of-fit test proved to be significant. Then, a central composite face-centered design was conducted. Finally, a stepwise multiple linear regression and subsequently an optimization problem solving were carried out. Two main drug clusters were found concerning the signal intensities of all runs of the augmented factorial design. p-Aminophenol, salicylic acid, and nimesulide constitute one cluster as a result of showing much higher sensitivity than the remaining drugs. The other cluster is more homogeneous with some sub-clusters comprising one pharmaceutical and its respective metabolite. It was observed that instrumental signal increased when both significant factors increased with maximum signal occurring when both codified factors are set at level +1. It was also found that, for most of the pharmaceuticals, interface voltage influences the intensity of the instrument more than the nebulizing gas flowrate. The only exceptions refer to nimesulide where the relative importance of the factors is reversed and still salicylic acid where both factors equally influence the instrumental signal. Graphical Abstract ᅟ.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing new envelope technologies. This work is part of a multi-phase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysismore » of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall design with exterior continuous insulation (CI). Phase 3, completed in two stages, continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

Formulation of topical bioadhesive gel of aceclofenac using 3-level factorial design.

PubMed

Singh, Sanjay; Parhi, Rabinarayan; Garg, Anuj

2011-01-01

The objective of this work was to develop bioadhesive topical gel of Aceclofenac with the help of response-surface approach. Experiments were performed according to a 3-level factorial design to evaluate the effects of two independent variables [amount of Poloxamer 407 (PL-407 = X1) and hydroxypropylmethyl cellulose K100 M (HPMC = X2)] on the bioadhesive character of gel, rheological property of gel (consistency index), and in-vitro drug release. The best model was selected to fit the data. Mathematical equation was generated by Design Expert® software for the model which assists in determining the effect of independent variables. Response surface plots were also generated by the software for analyzing effect of the independent variables on the response. Quadratic model was found to be the best for all the responses. Both independent variable (X1 and X2) were found to have synergistic effect on bioadhesion (Y1) but the effect of HPMC was more pronounced than PL-407. Consistency index was enhanced by increasing the level of both independent variables. An antagonistic effect of both independent variables was found on cumulative percentage release of drug in 2 (Y3) and 8 h (Y4). Both independent variables approximately equally contributed the antagonistic effect on Y3 whereas antagonistic effect of HPMC was more pronounced than PL-407. The effect of formulation variables on the product characteristics can be easily predicted and precisely interpreted by using a 3-level factorial experimental design and generated quadratic mathematical equations.

Adaptive laboratory evolution -- principles and applications for biotechnology.

PubMed

Dragosits, Martin; Mattanovich, Diethard

2013-07-01

Adaptive laboratory evolution is a frequent method in biological studies to gain insights into the basic mechanisms of molecular evolution and adaptive changes that accumulate in microbial populations during long term selection under specified growth conditions. Although regularly performed for more than 25 years, the advent of transcript and cheap next-generation sequencing technologies has resulted in many recent studies, which successfully applied this technique in order to engineer microbial cells for biotechnological applications. Adaptive laboratory evolution has some major benefits as compared with classical genetic engineering but also some inherent limitations. However, recent studies show how some of the limitations may be overcome in order to successfully incorporate adaptive laboratory evolution in microbial cell factory design. Over the last two decades important insights into nutrient and stress metabolism of relevant model species were acquired, whereas some other aspects such as niche-specific differences of non-conventional cell factories are not completely understood. Altogether the current status and its future perspectives highlight the importance and potential of adaptive laboratory evolution as approach in biotechnological engineering.

Assessment of Tooth Wear Among Glass Factory Workers: WHO 2013 Oral Health Survey

PubMed Central

Bhat, Nagesh; Asawa, Kailash; Tak, Mridula; Bapat, Salil; Gupta, Vivek Vardhan

2015-01-01

Background Glass factory workers are often exposed to the hazardous environment that leads to deleterious oral health and subsequently, general health. We planned to determine the effects of the particulates present in the milieu on the tooth wear among workers. Aim To assess tooth wear among glass factory workers in Jaipur, Rajasthan, India. Settings and Design A descriptive cross-sectional survey was conducted among 936 glass workers in Jaipur, Rajasthan, India from January-June 2014. Materials and Methods A survey proforma was designed for tooth wear evaluation with the help of WHO Oral Health Assessment form 2013 (for adults). Information regarding oral health practices, adverse habits and dietary habits, demographic details was gathered and clinical parameters were recorded. Statistical Analysis The Chi–square test, t–test, One-way Analysis of Variance and a Stepwise multiple linear regression analysis. Results The most prevalent form of erosion was enamel erosion (589, 62.93%) with few subjects of deeper dentinal erosion and the difference was statistically significant (p=0.001). Dental erosion was found to be higher among males compared to females. Years of experience and educational status were identified as best predictors for dental erosion. Conclusion It was concluded that there was considerable evidence of dental erosion found among the factory workers. Due to ignorance on social, cultural and health aspects, professional approach with regular dental care services for detection of early symptoms and planning of preventive strategies is warranted. PMID:26436050

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogacz, Slawomir Alex

Here, we summarize current state of concept for muon acceleration aimed at future Neutrino Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance through exploring interplay between complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival of the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to initially low RF frequency, e.g. 325 MHz, and then increased to 650 MHz, as the transverse size shrinks with increasing energy. High-gradient normalmore » conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. Here, we considered two cost effective schemes for accelerating muon beams for a stagable Neutrino Factory: Exploration of the so-called 'dual-use' linac concept, where the same linac structure is used for acceleration of both H- and muons and alternatively, the SRF efficient design based on multi-pass (4.5) 'dogbone' RLA, extendable to multi-pass FFAG-like arcs.« less

Effect of gamma irradiation and storage time on microbial growth and physicochemical characteristics of pumpkin (Cucurbita Moschata Duchesne ex Poiret) puree.

PubMed

Gliemmo, María F; Latorre, María E; Narvaiz, Patricia; Campos, Carmen A; Gerschenson, Lía N

2014-01-01

The effect of gamma irradiation (0-2 kGy) and storage time (0-28 days) on microbial growth and physicochemical characteristics of a packed pumpkin puree was studied. For that purpose, a factorial design was applied. The puree contained potassium sorbate, glucose and vanillin was stored at 25°C . Gamma irradiation diminished and storage time increased microbial growth. A synergistic effect between both variables on microbial growth was observed. Storage time decreased pH and color of purees. Sorbate content decreased with storage time and gamma irradiation. Mathematical models of microbial growth generated by the factorial design allowed estimating that a puree absorbing 1.63 kGy would have a shelf-life of 4 days. In order to improve this time, some changes in the applied hurdles were assayed. These included a thermal treatment before irradiation, a reduction of irradiation dose to 0.75 kGy and a decrease in storage temperature at 20°C . As a result, the shelf-life of purees increased to 28 days.

Improvement of submerged culture conditions to produce colorants by Penicillium purpurogenum

PubMed Central

Santos-Ebinuma, Valéria Carvalho; Roberto, Inês Conceição; Teixeira, Maria Francisca Simas; Pessoa, Adalberto

2014-01-01

Safety issues related to the employment of synthetic colorants in different industrial segments have increased the interest in the production of colorants from natural sources, such as microorganisms. Improved cultivation technologies have allowed the use of microorganisms as an alternative source of natural colorants. The objective of this work was to evaluate the influence of some factors on natural colorants production by a recently isolated from Amazon Forest, Penicillium purpurogenum DPUA 1275 employing statistical tools. To this purpose the following variables: orbital stirring speed, pH, temperature, sucrose and yeast extract concentrations and incubation time were studied through two fractional factorial, one full factorial and a central composite factorial designs. The regression analysis pointed out that sucrose and yeast extract concentrations were the variables that influenced more in colorants production. Under the best conditions (yeast extract concentration around 10 g/L and sucrose concentration of 50 g/L) an increase of 10, 33 and 23% respectively to yellow, orange and red colorants absorbance was achieved. These results show that P. purpurogenum is an alternative colorants producer and the production of these biocompounds can be improved employing statistical tool. PMID:25242965

Factory daughters, the family, and nuptiality in Java.

PubMed

Wolf, D L

1990-01-01

The commercialization of agriculture, increasing landlessness, and an expanding labor class in rural areas of Java are all the result of industrialization. This work discusses the effect of female employment on marriage patterns of women working in rural factories. The central point is that employment has not only increased the financial autonomy of these women, but also increased the level of control they have over the choice of marriage partners. The data set used for analysis consisted of the observations of all factory workers and all non-factory females age 15-24 located in an agricultural village. The observations were make over a 15 month period between 1981-83. A follow up visit was made in 1986 and the following conclusions were then made: 1) the village study gave detailed data, but the data set was not large enough, thus a follow up study that encompasses more people is called for; 2) young rural female factory workers are more likely to chose their marriage partners than those engaged in traditional village labor. Of those that married and worked in factories, their fertility rate was significantly lower, compared to non-factory workers. Factory workers also had different family structures, because they spent less time living in extended families because of a larger income for the couple. This study indicates that increased economic control results in increased life decision control. This changed the daughter's economic relationship with her family and gives her more control in marriage decisions.

Development and Optimization of Dispersible Tablet of Bacopa monnieri with Improved Functionality for Memory Enhancement

PubMed Central

Thakkar, Vaishali Tejas; Deshmukh, Amol; Hingorani, Lal; Juneja, Payal; Baldaniya, Lalji; Patel, Asha; Pandya, Tosha; Gohel, Mukesh

2017-01-01

Introduction: The Bacopa monnieri is traditional Ayurvedic medicine, and reported for memory-enhancing effects. The Bacoside is poorly soluble, bitter in taste and responsible for the memory enhancement action. Memory enhancer is commonly prescribed for children or elder people. Objective: Poor solubility, patient compliance and bitterness were a major driving force to develop taste masked β-cyclodextrin complex and dispersible tablets. Materials and Methods: The inclusion complex of Bacopa monnieri and β-cyclodextrin was prepared in different molar ratios of Bacopa monnieri by Co-precipitation method. Phase solubility study was conducted to evaluate the effect of β-cyclodextrin on aqueous solubility of Bacoside A. The characterization was determined by Fourier transformation infrared spectroscopy (FTIR),Differential scanning calorimetry (DSC) and X-ray diffraction study (XRD).Crospovidone and croscarmallose sodium were used as super disintigrant. The 32 full factorial design was adopted to investigate the influence of two superdisintegrants on the wetting time and disntegration time of the tablets. Conclusion: The result revels that molar ratio (1:4) of inclusion complex enhance 3-fold solubility. Full factorial design was successfully employed for the optimization of dispersible tablet of B. monnieri. The short-term accelerated stability study confirmed that high stability of B. monnieri in inclusion complex. PMID:28979076

Fractional Factorial Design Study on the Performance of GAC-Enhanced Electrocoagulation Process Involved in Color Removal from Dye Solutions.

PubMed

Secula, Marius Sebastian; Cretescu, Igor; Cagnon, Benoit; Manea, Liliana Rozemarie; Stan, Corneliu Sergiu; Breaban, Iuliana Gabriela

2013-07-10

The aim of this study was to determine the effects of main factors and interactions on the color removal performance from dye solutions using the electrocoagulation process enhanced by adsorption on Granular Activated Carbon (GAC). In this study, a mathematical approach was conducted using a two-level fractional factorial design ( FFD ) for a given dye solution. Three textile dyes: Acid Blue 74, Basic Red 1, and Reactive Black 5 were used. Experimental factors used and their respective levels were: current density (2.73 or 27.32 A/m²), initial pH of aqueous dye solution (3 or 9), electrocoagulation time (20 or 180 min), GAC dose (0.1 or 0.5 g/L), support electrolyte (2 or 50 mM), initial dye concentration (0.05 or 0.25 g/L) and current type (Direct Current- DC or Alternative Pulsed Current- APC ). GAC-enhanced electrocoagulation performance was analyzed statistically in terms of removal efficiency, electrical energy, and electrode material consumptions, using modeling polynomial equations. The statistical significance of GAC dose level on the performance of GAC enhanced electrocoagulation and the experimental conditions that favor the process operation of electrocoagulation in APC regime were determined. The local optimal experimental conditions were established using a multi-objective desirability function method.

Fractional Factorial Design Study on the Performance of GAC-Enhanced Electrocoagulation Process Involved in Color Removal from Dye Solutions

PubMed Central

Secula, Marius Sebastian; Cretescu, Igor; Cagnon, Benoit; Manea, Liliana Rozemarie; Stan, Corneliu Sergiu; Breaban, Iuliana Gabriela

2013-01-01

The aim of this study was to determine the effects of main factors and interactions on the color removal performance from dye solutions using the electrocoagulation process enhanced by adsorption on Granular Activated Carbon (GAC). In this study, a mathematical approach was conducted using a two-level fractional factorial design (FFD) for a given dye solution. Three textile dyes: Acid Blue 74, Basic Red 1, and Reactive Black 5 were used. Experimental factors used and their respective levels were: current density (2.73 or 27.32 A/m2), initial pH of aqueous dye solution (3 or 9), electrocoagulation time (20 or 180 min), GAC dose (0.1 or 0.5 g/L), support electrolyte (2 or 50 mM), initial dye concentration (0.05 or 0.25 g/L) and current type (Direct Current—DC or Alternative Pulsed Current—APC). GAC-enhanced electrocoagulation performance was analyzed statistically in terms of removal efficiency, electrical energy, and electrode material consumptions, using modeling polynomial equations. The statistical significance of GAC dose level on the performance of GAC enhanced electrocoagulation and the experimental conditions that favor the process operation of electrocoagulation in APC regime were determined. The local optimal experimental conditions were established using a multi-objective desirability function method. PMID:28811405

The Evaluation of Teaching the Nursing Process Using Traditional Lecture, Campus Laboratory, Clinical, and the Addition of High Fidelity Human Simulation (HFHS) Unfolding Scenarios

ERIC Educational Resources Information Center

Irwin, Ruth E.

2013-01-01

It is not sufficient to just make changes in a nursing curriculum without a plan to evaluate the impact on program outcomes. This study sought to determine the outcomes of teaching the nursing process to Foundation of Nursing students in an Associate Degree Nursing program using a factorial design study. Four groups of students were taught the…

Rising Valor: A Research Study of Chinese Women Working in Factories, Educating Themselves and Redefining Women's Empowerment

ERIC Educational Resources Information Center

Newton, Claudia Kristine

2017-01-01

Few empirical studies directly address education among women factory workers in China, much less their sense of agency, power, character and awareness. This dissertation seeks to discover whether among women factory workers in the core manufacturing center, the Yangtze River Delta region of China, educational opportunities and other resources…

The landing of field mosquitoes on permethrin-treated military uniforms in queensland, australia.

PubMed

Frances, S P; Mackenzie, D O; Sferopoulos, R; Lee, Bin

2014-12-01

A study to evaluate the protection provided by permethrin-treated military fabric following cold-water washing against host-seeking mosquitoes is reported. The landing/probing of native mosquitoes on Australian Defence Force Disruptive Pattern Combat Uniform shirts treated by dipping in 0.6% permethrin emulsion (Perigen Defence®, containing 500 g/l permethrin), and commercial factory treatments in the USA (Factory A) and Europe (Factory B) were recorded after 0, 1, 3, 5, and 10 washes. The study showed that significantly shorter landing/probing times compared with untreated controls were recorded for shirts treated with Factory A treatment after 0 and 1 wash, and for the Factory B treatment after 0 washes, and there were no differences between permethrin treatment and control landing. The study concludes that better methods to assess protection from landing/probing mosquitoes in the field are needed.

Approaching the socialist factory and its workforce: considerations from fieldwork in (former) Yugoslavia

PubMed Central

Archer, Rory; Musić, Goran

2017-01-01

Abstract The socialist factory, as the ‘incubator’ of the new socialist (wo)man, is a productive entry point for the study of socialist modernization and its contradictions. By outlining some theoretical and methodological insights gathered through field-research in factories in former Yugoslavia, we seek to connect the state of labour history in the Balkans to recent breakthroughs made by labour historians of other socialist countries. The first part of this article sketches some of the specificities of the Yugoslav self-managed factory and its heterogeneous workforce. It presents the ambiguous relationship between workers and the factory and demonstrates the variety of life trajectories for workers in Yugoslav state-socialism (from model communists to alienated workers). The second part engages with the available sources for conducting research inside and outside the factory advocating an approach which combines factory and local archives, print media and oral history. PMID:28190894

Approaching the socialist factory and its workforce: considerations from fieldwork in (former) Yugoslavia.

PubMed

Archer, Rory; Musić, Goran

2017-01-01

The socialist factory, as the 'incubator' of the new socialist (wo)man, is a productive entry point for the study of socialist modernization and its contradictions. By outlining some theoretical and methodological insights gathered through field-research in factories in former Yugoslavia, we seek to connect the state of labour history in the Balkans to recent breakthroughs made by labour historians of other socialist countries. The first part of this article sketches some of the specificities of the Yugoslav self-managed factory and its heterogeneous workforce. It presents the ambiguous relationship between workers and the factory and demonstrates the variety of life trajectories for workers in Yugoslav state-socialism (from model communists to alienated workers). The second part engages with the available sources for conducting research inside and outside the factory advocating an approach which combines factory and local archives, print media and oral history.

Patient, physician and presentational influences on clinical decision making for breast cancer: results from a factorial experiment.

PubMed

McKinlay, J B; Burns, R B; Durante, R; Feldman, H A; Freund, K M; Harrow, B S; Irish, J T; Kasten, L E; Moskowitz, M A

1997-02-01

This study examines the influence of six patient characteristics (age, race, socioeconomic status, comorbidities, mobility and presentational style) and two physician characteristics (medical specialty and years of clinical experience) on physicians' clinical decision making behaviour in the evaluation treatment of an unknown and known breast cancer. Physicians' variability and certainty associated with diagnostic and treatment behaviour were also examined. Separate analyses explored the influence of these non-medical factors on physicians' cognitive processes. Using a fractional factorial design, 128 practising physicians were shown two videotaped scenarios and asked about possible diagnoses and medical recommendations. Results showed that physicians displayed considerable variability in response to several patient-based factors. Physician characteristics also emerged as important predictors of clinical behaviour, thus confirming the complexity of the medical decision-making process.

The Democritos Movement Screening Tool for Preschool Children (DEMOST-PRE©): development and factorial validity.

PubMed

Kambas, Antonis; Venetsanou, Fotini

2014-07-01

The aim of this study was (a) to develop an assessment tool (the Democritos Movement Screening Tool for Preschool Children - DEMOST-PRE), designed to provide preschool educators, clinicians and researchers with information about assessment and screening of the motor proficiency of children aged 4-6 years, as well as the development and control of movement programmes and (b) to assess its factorial validity. First, tool's content and face validity were established and its final structure was determined. Then, the DEMOST-PRE was administered to 435 children (197 girls) aged 48-71 months (M=60.48 months, SD=6.98). The factor analysis conducted revealed two distinct components. Present evidence combined with the DEMOST-PRE administrative traits make it promising for preschool aged children's assessment. Copyright © 2014 Elsevier Ltd. All rights reserved.

Formulation, optimization, and evaluation of self-emulsifying drug delivery systems of nevirapine

PubMed Central

Chintalapudi, Ramprasad; Murthy, T. E. G. K.; Lakshmi, K. Rajya; Manohar, G. Ganesh

2015-01-01

Background: The aim of the present study was to formulate and optimize the self-emulsifying drug delivery systems (SEDDS) of nevirapine (NVP) by use of 22 factorial designs to enhance the oral absorption of NVP by improving its solubility, dissolution rate, and diffusion profile. SEDDS are the isotropic mixtures of oil, surfactant, co-surfactant and drug that form oil in water microemulsion when introduced into the aqueous phase under gentle agitation. Materials and Methods: Solubility of NVP in different oils, surfactants, and co-surfactants was determined for the screening of excipients. Pseudo-ternary phase diagrams were constructed by the aqueous titration method, and formulations were developed based on the optimum excipient combinations with the help of data obtained through the maximum micro emulsion region containing combinations of oil, surfactant, and co-surfactant. The formulations of SEDDS were optimized by 22 factorial designs. Results: The optimum formulation of SEDDS contains 32.5% oleic acid, 44.16% tween 20, and 11.9% polyethylene glycol 600 as oil, surfactant, and co-surfactant respectively. The SEDDS was evaluated for the following drug content, self-emulsification time, rheological properties, zeta potential, in vitro diffusion studies, thermodynamic stability studies, and in vitro dissolution studies. An increase in dissolution was achieved by SEDDS compared to pure form of NVP. Conclusion: Overall, this study suggests that the dissolution and oral bioavailability of NVP could be improved by SEDDS technology. PMID:26682191

Novel lectin-modified poly(ethylene-co-vinyl acetate) mucoadhesive nanoparticles of carvedilol: preparation and in vitro optimization using a two-level factorial design.

PubMed

Varshosaz, Jaleh; Moazen, Ellaheh

2014-08-01

Carvedilol used in cardiovascular diseases has systemic bioavailability of 25-35%. The objective of this study was production of lectin-modified poly(ethylene-co-vinyl acetate) (PEVA) as mucoadhesive nanoparticles to enhance low oral bioavailability of carvedilol. Nanoparticles were prepared by the emulsification-solvent evaporation method using a two-level factorial design. The studied variables included the vinyl acetate content of the polymer, drug and polymer content. Surface modification of PEVA nanoparticles with lectin was carried out by the adsorption method and coupling efficiency was determined using the Bradford assay. Mucoadhesion of nanoparticles was studied on mucin. The particle size, polydispersity index, zeta potential, drug loading and drug release from nanoparticles were studied. The morphology of nanoparticles and crystalline status of the entrapped drug were studied by SEM, DSC and XRD tests, respectively. Results showed the most effective factor on particle size and zeta potential was the interaction of polymer and drug content while, drug loading efficiency and mucoadhesion were more affected by the interaction of polymer type and drug content. Drug concentration was the most effective variable on the drug release rate. The drug was in amorphous state in nanoparticles. The optimum nanoparticles obtained by 45 mg of copolymer contained 12% vinyl acetate/4.3 ml of organic phase and drug concentration of 37.5 wt% of polymer.

Mathematical models of cell factories: moving towards the core of industrial biotechnology.

PubMed

Cvijovic, Marija; Bordel, Sergio; Nielsen, Jens

2011-09-01

Industrial biotechnology involves the utilization of cell factories for the production of fuels and chemicals. Traditionally, the development of highly productive microbial strains has relied on random mutagenesis and screening. The development of predictive mathematical models provides a new paradigm for the rational design of cell factories. Instead of selecting among a set of strains resulting from random mutagenesis, mathematical models allow the researchers to predict in silico the outcomes of different genetic manipulations and engineer new strains by performing gene deletions or additions leading to a higher productivity of the desired chemicals. In this review we aim to summarize the main modelling approaches of biological processes and illustrate the particular applications that they have found in the field of industrial microbiology. © 2010 The Authors. Journal compilation © 2010 Society for Applied Microbiology and Blackwell Publishing Ltd.

Microeconomics of yield learning and process control in semiconductor manufacturing

NASA Astrophysics Data System (ADS)

Monahan, Kevin M.

2003-06-01

Simple microeconomic models that directly link yield learning to profitability in semiconductor manufacturing have been rare or non-existent. In this work, we review such a model and provide links to inspection capability and cost. Using a small number of input parameters, we explain current yield management practices in 200mm factories. The model is then used to extrapolate requirements for 300mm factories, including the impact of technology transitions to 130nm design rules and below. We show that the dramatic increase in value per wafer at the 300mm transition becomes a driver for increasing metrology and inspection capability and sampling. These analyses correlate well wtih actual factory data and often identify millions of dollars in potential cost savings. We demonstrate this using the example of grating-based overlay metrology for the 65nm node.

Effect of feeding ractopamine hydrochloride on growth performance and responses to handling and transport in heavy-weight pigs

USDA-ARS?s Scientific Manuscript database

The impact of feeding ractopamine hydrochloride (RAC) on growth performance and responses to handling and transport in heavy BW pigs was evaluated in a study carried out as a split-plot design with a 3 × 3 factorial arrangement of treatments: 1) RAC level (0 vs. 5 vs. 7.5 mg/kg); 2) Handling Intensi...

Product Knowledge and Product Involvement as Moderators of the Effects of Information on Purchase Decisions: A Case Study Using the Perfect Information Frontier Approach.

ERIC Educational Resources Information Center

Bei, Lien-Ti; Widdows, Richard

1999-01-01

Using a 2x2x2 factorial design, data from 282 respondents illustrate that people with more product knowledge ("experts") are more likely to be persuaded by complex than simple product information. "Novices" reacted similarly to simple and complex information. The type of information provided influences purchasing decisions. (SK)

Reading Subtitles and Taking Enotes While Learning Scientific Materials in a Multimedia Environment: Cognitive Load Perspectives on EFL Students

ERIC Educational Resources Information Center

Lin, John J. H.; Lee, Yuan-Husan; Wang, Dai-Yi; Lin, Sunny S. J.

2016-01-01

The present study investigated the effects of providing subtitles and taking enotes on cognitive load and performance. A total of 73 English-as-a-Foreign-Language (EFL) undergraduates learned brain anatomy and cognitive functions through multimedia programs. We used a 2 (subtitle/no) x 2 (taking enotes/no) factorial design to test the following:…

Effect of Formative and Ability Test Results on Early Learning of Students

ERIC Educational Resources Information Center

Kadir, Abdul; Ardi, Muhammad; Nurhayati, B.; Dirawan, Gufran Darma

2016-01-01

The objective of this study was to examine the relationship of formative tests to early learning ability of students in the science learning style. This research used an experimental method with a 2 x 2 factorial design. The participants comprised all the students in class VII of the Islamic Junior High School State of Kolaka, a total of 343…

Habitat use of two songbird species in pine-hardwood forests treated with prescribed burning and thinning: first year results

Treesearch

Jill M. Wick; Yong Wang

2010-01-01

We evaluated habitat use and home range size of hooded warblers (Wilsonia citrine) and worm-eating warblers (Helmitheros vermivorus) in six treated mixed oak-pine stands on the Bankhead National Forest in north-central AL. Study design is a randomized complete block with a factorial arrangement of three thinning levels (no thin, 11...

The Effects of an Individualised ICT-Based Music Education Programme on Primary School Students' Musical Competence and Grades

ERIC Educational Resources Information Center

Hernández-Bravo, Juan R.; Cardona-Moltó, M. Cristina; Hernández-Bravo, José A.

2016-01-01

The purpose of this study was to examine the effect of an information and communications technology (ICT)-based individualised music education programme on primary students' musical competence. A 2 × 3 aptitude treatment interaction factorial design was used to assess the impact of the programme as a function of students' musical aptitude (MA)…

Coqui frog populations are negatively affected by canopy opening but not detritus deposition following an experimental hurricane in a tropical rainforest

Treesearch

Paul D. Klawanski; Ben Dalton; Aaron B. Shiels

2014-01-01

Hurricanes, cyclones, and typhoons are common disturbances in many island and coastal forests. There is a lack of understanding of the importance to forest biota of the two major physical aspects that occur simultaneously during a hurricane: canopy disturbance and detritus (debris) deposition onto the ground. Using a replicated factorial design, our study involved...

Effects of Emotional Intelligence and Locus of Control Training on the Psychological Well-Being of Adolescents with Visual Impairments in Nigeria

ERIC Educational Resources Information Center

Eniola, M. S.; Ajobiewe, Abthonia Ifeoma

2013-01-01

This current study, investigated the relative effectiveness of Emotional Intelligence Training (EIT) and Locus of Control Training (LCT) on the psychological well-being of adolescent with visual impairment. The pretest-posttest control group experimental design with a 3x2x2 factorial matrix was used. The participants were 120 adolescents with…

Experimental studies of two-stage centrifugal dust concentrator

NASA Astrophysics Data System (ADS)

Vechkanova, M. V.; Fadin, Yu M.; Ovsyannikov, Yu G.

2018-03-01

The article presents data of experimental results of two-stage centrifugal dust concentrator, describes its design, and shows the development of a method of engineering calculation and laboratory investigations. For the experiments, the authors used quartz, ceramic dust and slag. Experimental dispersion analysis of dust particles was obtained by sedimentation method. To build a mathematical model of the process, dust collection was built using central composite rotatable design of the four factorial experiment. A sequence of experiments was conducted in accordance with the table of random numbers. Conclusion were made.

Synthetic aperture radar operator tactical target acquisition research

NASA Technical Reports Server (NTRS)

Hershberger, M. L.; Craig, D. W.

1978-01-01

A radar target acquisition research study was conducted to access the effects of two levels of 13 radar sensor, display, and mission parameters on operator tactical target acquisition. A saturated fractional-factorial screening design was employed to examine these parameters. Data analysis computed ETA squared values for main and second-order effects for the variables tested. Ranking of the research parameters in terms of importance to system design revealed four variables (radar coverage, radar resolution/multiple looks, display resolution, and display size) accounted for 50 percent of the target acquisition probability variance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. This work is part of a multiphase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall designmore » with exterior continuous insulation (CI). This report describes Phase 3, which was completed in two stages and continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

The Use of a Fractional Factorial Design to Determine the Factors That Impact 1,3-Propanediol Production from Glycerol by Halanaerobium hydrogeniformans.

PubMed

Kalia, Shivani; Trager, Jordan; Sitton, Oliver C; Mormile, Melanie R

2016-08-20

In recent years, biodiesel, a substitute for fossil fuels, has led to the excessive production of crude glycerol. The resulting crude glycerol can possess a high concentration of salts and an alkaline pH. Moreover, current crude glycerol purification methods are expensive, rendering this former commodity a waste product. However, Halanaerobium hydrogeniformans, a haloalkaliphilic bacterium, possesses the metabolic capability to convert glycerol into 1,3-propanediol, a valuable commodity compound, without the need for salt dilution or adjusting pH when grown on this waste. Experiments were performed with different combinations of 24 medium components to determine their impact on the production of 1,3-propanediol by using a fractional factorial design. Tested medium components were selected based on data from the organism's genome. Analysis of HPLC data revealed enhanced production of 1,3-propanediol with additional glycerol, pH, vitamin B12, ammonium ions, sodium sulfide, cysteine, iron, and cobalt. However, other selected components; nitrate ions, phosphate ions, sulfate ions, sodium:potassium ratio, chloride, calcium, magnesium, silicon, manganese, zinc, borate, nickel, molybdenum, tungstate, copper and aluminum, did not enhance 1,3-propanediol production. The use of a fractional factorial design enabled the quick and efficient assessment of the impact of 24 different medium components on 1,3-propanediol production from glycerol from a haloalkaliphilic bacterium.

D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

EPA Science Inventory

Humans are exposed to mixtures of environmental compounds. A regulatory assumption is that the mixtures of chemicals act in an additive manner. However, this assumption requires experimental validation. Traditional experimental designs (full factorial) require a large number of e...

Effect of factory effluents on physiological and biochemical contents of Gossypium hirsutum l.

PubMed

Muthusamy, A; Jayabalan, N

2001-10-01

The effect of sago and sugar factory effluents was studied on Gossypium hirsutum L. var. MCU 5 and MCU 11. Plants were irrigated with 0, 25, 50, 75 and 100% of effluents of both factories. At lower concentration (25%) of sugar factory effluents had stimulatory effect on all biochemical contents observed. Moreover, all concentration of sago factory effluents were found to have inhibitory effect on all biochemical contents except proline content which increased with increasing concentration of both the effluents. Plants growing on adjacent to sago and sugar factories or they irrigated with such type of polluted water, may accumulate the heavy metals found in both the effluents, at higher levels in plant products and if consumed may have similar effect on living organisms.

Observation chart design features affect the detection of patient deterioration: a systematic experimental evaluation.

PubMed

Christofidis, Melany J; Hill, Andrew; Horswill, Mark S; Watson, Marcus O

2016-01-01

To systematically evaluate the impact of several design features on chart-users' detection of patient deterioration on observation charts with early-warning scoring-systems. Research has shown that observation chart design affects the speed and accuracy with which abnormal observations are detected. However, little is known about the contribution of individual design features to these effects. A 2 × 2 × 2 × 2 mixed factorial design, with data-recording format (drawn dots vs. written numbers), scoring-system integration (integrated colour-based system vs. non-integrated tabular system) and scoring-row placement (grouped vs. separate) varied within-participants and scores (present vs. absent) varied between-participants by random assignment. 205 novice chart-users, tested between March 2011-March 2014, completed 64 trials where they saw real patient data presented on an observation chart. Each participant saw eight cases (four containing abnormal observations) on each of eight designs (which represented a factorial combination of the within-participants variables). On each trial, they assessed whether any of the observations were physiologically abnormal, or whether all observations were normal. Response times and error rates were recorded for each design. Participants responded faster (scores present and absent) and made fewer errors (scores absent) using drawn-dot (vs. written-number) observations and an integrated colour-based (vs. non-integrated tabular) scoring-system. Participants responded faster using grouped (vs. separate) scoring-rows when scores were absent, but separate scoring-rows when scores were present. Our findings suggest that several individual design features can affect novice chart-users' ability to detect patient deterioration. More broadly, the study further demonstrates the need to evaluate chart designs empirically. © 2015 John Wiley & Sons Ltd.

Adequacy of different experimental designs for eucalyptus spacing trials in Portuguese environmental conditions

Treesearch

Paula Soares; Margarida Tome

2000-01-01

In Portugal, several eucalyptus spacing trials cover a relatively broad range of experimental designs: trials with a non-randomized block design with plots of different size and number of trees per plot; trials based on a non-systematic design in which spacings were randomized resulting in a factorial arrangement with plots of different size and shape and equal number...

Robust tests for multivariate factorial designs under heteroscedasticity.

PubMed

Vallejo, Guillermo; Ato, Manuel

2012-06-01

The question of how to analyze several multivariate normal mean vectors when normality and covariance homogeneity assumptions are violated is considered in this article. For the two-way MANOVA layout, we address this problem adapting results presented by Brunner, Dette, and Munk (BDM; 1997) and Vallejo and Ato (modified Brown-Forsythe [MBF]; 2006) in the context of univariate factorial and split-plot designs and a multivariate version of the linear model (MLM) to accommodate heterogeneous data. Furthermore, we compare these procedures with the Welch-James (WJ) approximate degrees of freedom multivariate statistics based on ordinary least squares via Monte Carlo simulation. Our numerical studies show that of the methods evaluated, only the modified versions of the BDM and MBF procedures were robust to violations of underlying assumptions. The MLM approach was only occasionally liberal, and then by only a small amount, whereas the WJ procedure was often liberal if the interactive effects were involved in the design, particularly when the number of dependent variables increased and total sample size was small. On the other hand, it was also found that the MLM procedure was uniformly more powerful than its most direct competitors. The overall success rate was 22.4% for the BDM, 36.3% for the MBF, and 45.0% for the MLM.

Virtual patients design and its effect on clinical reasoning and student experience: a protocol for a randomised factorial multi-centre study.

PubMed

Bateman, James; Allen, Maggie E; Kidd, Jane; Parsons, Nick; Davies, David

2012-08-01

Virtual Patients (VPs) are web-based representations of realistic clinical cases. They are proposed as being an optimal method for teaching clinical reasoning skills. International standards exist which define precisely what constitutes a VP. There are multiple design possibilities for VPs, however there is little formal evidence to support individual design features. The purpose of this trial is to explore the effect of two different potentially important design features on clinical reasoning skills and the student experience. These are the branching case pathways (present or absent) and structured clinical reasoning feedback (present or absent). This is a multi-centre randomised 2 x 2 factorial design study evaluating two independent variables of VP design, branching (present or absent), and structured clinical reasoning feedback (present or absent).The study will be carried out in medical student volunteers in one year group from three university medical schools in the United Kingdom, Warwick, Keele and Birmingham. There are four core musculoskeletal topics. Each case can be designed in four different ways, equating to 16 VPs required for the research. Students will be randomised to four groups, completing the four VP topics in the same order, but with each group exposed to a different VP design sequentially. All students will be exposed to the four designs. Primary outcomes are performance for each case design in a standardized fifteen item clinical reasoning assessment, integrated into each VP, which is identical for each topic. Additionally a 15-item self-reported evaluation is completed for each VP, based on a widely used EViP tool. Student patterns of use of the VPs will be recorded.In one centre, formative clinical and examination performance will be recorded, along with a self reported pre and post-intervention reasoning score, the DTI. Our power calculations indicate a sample size of 112 is required for both primary outcomes. This trial will provide robust evidence to support the effectiveness of different designs of virtual patients, based on student performance and evaluation. The cases and all learning materials will be open access and available on a Creative Commons Attribution-Share-Alike license.

Development of a low cost integrated 15 kW A.C. solar tracking sub-array for grid connected PV power system applications

NASA Astrophysics Data System (ADS)

Stern, M.; West, R.; Fourer, G.; Whalen, W.; Van Loo, M.; Duran, G.

1997-02-01

Utility Power Group has achieved a significant reduction in the installed cost of grid-connected PV systems. The two part technical approach focused on 1) The utilization of a large area factory assembled PV panel, and 2) The integration and packaging of all sub-array power conversion and control functions within a single factory produced enclosure. Eight engineering prototype 15kW ac single axis solar tracking sub-arrays were designed, fabricated, and installed at the Sacramento Municipal Utility District's Hedge Substation site in 1996 and are being evaluated for performance and reliability. A number of design enhancements will be implemented in 1997 and demonstrated by the field deployment and operation of over twenty advanced sub-array PV power systems.

75 FR 9157 - Proposed Information Collection; Comment Request; Alaska Region Scale and Catch Weighing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... and catch weighing requirements address performance standards designed to ensure that all catch... motherships is based on the vessel meeting a series of design criteria. Because of the wide variations in factory layout for inshore processors, NMFS requires a performance-based catch monitoring system for...

75 FR 52507 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... standards designed to ensure that all catch delivered to the processor is accurately weighed and accounted... NMFS for catcher/processors and motherships is based on the vessel meeting a series of design criteria. Because of the wide variations in factory layout for inshore processors, NMFS requires a performance-based...

POWER AND SAMPLE SIZE CALCULATIONS FOR LINEAR HYPOTHESES ASSOCIATED WITH MIXTURES OF MANY COMPONENTS USING FIXED-RATIO RAY DESIGNS

EPA Science Inventory

Response surface methodology, often supported by factorial designs, is the classical experimental approach that is widely accepted for detecting and characterizing interactions among chemicals in a mixture. In an effort to reduce the experimental effort as the number of compound...

Applications of Chemiluminescence in the Teaching of Experimental Design

ERIC Educational Resources Information Center

Krawczyk, Tomasz; Slupska, Roksana; Baj, Stefan

2015-01-01

This work describes a single-session laboratory experiment devoted to teaching the principles of factorial experimental design. Students undertook the rational optimization of a luminol oxidation reaction, using a two-level experiment that aimed to create a long-lasting bright emission. During the session students used only simple glassware and…

Exploring Fashion Design.

ERIC Educational Resources Information Center

Arata, Barbara

The purpose of the curriculum guide is to introduce the exploratory student to the fundamental skills and knowledge necessary for employment in the garment industry, from factory to design room. It was developed for a six or seven-week exploratory program for ninth or tenth grade students. The manual provides an introduction to the different areas…

Computer-assisted design in perceptual-motor skills research

NASA Technical Reports Server (NTRS)

Rogers, C. A., Jr.

1974-01-01

A categorization was made of independent variables previously found to be potent in simple perceptual-motor tasks. A computer was then used to generate hypothetical factorial designs. These were evaluated in terms of literature trends and pragmatic criteria. Potential side-effects of machine-assisted research strategy were discussed.

A survey of airborne and skin exposures to chemicals in footwear and equipment factories in Thailand.

PubMed

Todd, Lori A; Mottus, Kathleen; Mihlan, Gary J

2008-03-01

This research reports on a pilot industrial hygiene study that was performed at four footwear factories and two equipment factories in Thailand. Workers in these factories were exposed through inhalation and dermal contact to a large number of organic vapors from solvents and cements that were hand applied. In addition, these workers were exposed to highly toxic isocyanates primarily through the dermal route. A total of 286 personal air samples were obtained at the four footwear factories using organic vapor monitors; individual job tasks were monitored using a real-time MIRAN Spectrometer. A total of 64 surface, tool, or hand samples were monitored for isocyanates using surface contamination detectors. Real-time measurements were also obtained for organic vapors in two equipment factories. From 8% to 21% of the workers sampled in each footwear factory were overexposed to mixtures of chemicals from solvents and cements. Up to 100% of the workers performing specific job tasks were overexposed to mixtures of chemicals. From 39% to 69% of the surface samples were positive for unreacted isocyanates. Many of the real-time measurements obtained in the equipment factories exceeded occupational exposure limits. Personal protective equipment and engineering controls were inadequate in all of the factories.

A systems-level approach for metabolic engineering of yeast cell factories.

PubMed

Kim, Il-Kwon; Roldão, António; Siewers, Verena; Nielsen, Jens

2012-03-01

The generation of novel yeast cell factories for production of high-value industrial biotechnological products relies on three metabolic engineering principles: design, construction, and analysis. In the last two decades, strong efforts have been put on developing faster and more efficient strategies and/or technologies for each one of these principles. For design and construction, three major strategies are described in this review: (1) rational metabolic engineering; (2) inverse metabolic engineering; and (3) evolutionary strategies. Independent of the selected strategy, the process of designing yeast strains involves five decision points: (1) choice of product, (2) choice of chassis, (3) identification of target genes, (4) regulating the expression level of target genes, and (5) network balancing of the target genes. At the construction level, several molecular biology tools have been developed through the concept of synthetic biology and applied for the generation of novel, engineered yeast strains. For comprehensive and quantitative analysis of constructed strains, systems biology tools are commonly used and using a multi-omics approach. Key information about the biological system can be revealed, for example, identification of genetic regulatory mechanisms and competitive pathways, thereby assisting the in silico design of metabolic engineering strategies for improving strain performance. Examples on how systems and synthetic biology brought yeast metabolic engineering closer to industrial biotechnology are described in this review, and these examples should demonstrate the potential of a systems-level approach for fast and efficient generation of yeast cell factories. © 2011 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

Exploring the interaction of patient activation and message design variables: message frame and presentation mode influence on the walking behavior of patients with type 2 diabetes.

PubMed

Ledford, Christy J W

2012-10-01

Examining interpersonal (physician-patient) communication strategies for promoting walking exercise to patients with type 2 diabetes assigned to primary care clinics, the study evaluated two message design variables--frame and presentation mode--as influencers of communication and adoption success. The single-site, four-week, prospective intervention study followed a 2×3 factorial, non-equivalent comparison group quasi-experimental design. Results showed frame was significantly related to steps walked; however, when including patient activation as an interaction, frame was non-significant. The model including patient activation interactions, however, detected significant mode effects on behavior. Results provide evidence that statistics are most effectively used with activated patients.

Cohort study on respiratory and neurological disorders among workers in a bone glue factory in Egypt.

PubMed

Al-Batanony, M A; Abdel-Rasoul, G M; Abu-Salem, M A; Al-Ahmar, I A; Al-Badry, A S

2012-04-01

Glues are strong, liquid adhesive derived from animal tissues. It has been shown that glue sniffing is associated with demyelinating polyneuropathy. The low molecular weight agents which cause occupational lung disease have generally included the isocyanates exposure to which could result in asthma among workers. Toluene is also used widely in glue and adhesive industry and households where toluene exposure and abuse can occur. To study some respiratory and neurological disorders that may arise in workers in a bone glue factory in Queisna industrial zone, Menoufyia governorate, Egypt. In a historical cohort study, the exposed participants (n = 50) were recruited from workers in a bone glue factory in Queisna industrial zone, Menoufyia governorate. The unexposed group was selected from workers' relatives who had never worked in glue industry. All participants completed a pre-designed questionnaire on personal and occupational histories. Pulmonary function tests as well as electromyography (EMG) were performed for all participants. Urinary hippuric acid was also measure in all participants. The prevalence of cough, asthmatic attacks and paresthesia were significantly higher among exposed than unexposed participants. Abnormal spirometric measurements (particularly towards obstruction), abnormal EMG and positive urinary hippuric acid were significantly more prevalent among exposed than unexposed group. Spirometry and EMG should be included in the periodic medical examination for exposed workers for early detection of respiratory and neurological disorders. Urinary hippuric acid could be a useful indicator of the nerve conduction abnormalities and should be measured periodically for these workers.

On Improved Least Squares Regression and Artificial Neural Network Meta-Models for Simulation via Control Variates

DTIC Science & Technology

2016-09-15

18] under the context of robust parameter design for simulation. Bellucci’s technique is used in this research, primarily because the interior -point...Fundamentals of Radial Basis Neural Network (RBNN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 1.2.2.2 Design of Experiments...with Neural Nets . . . . . . . . . . . . . 31 1.2.2.3 Factorial Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 1.2.2.4

Entrepreneurship Education through Industrial Internship for Technical and Vocational Students

NASA Astrophysics Data System (ADS)

Sumual, H.; Soputan, G. J.

2018-02-01

The spirit of entrepreneurship must be formed in an integrated process in learning so that commitment, responsibility and work ethic on the candidate of vocational high school graduates are effectively promoted. Learning teaching factory teaches students how to find problems, build prototypes, learn to make business plan, and learn to present their own solutions. The research objective is to assess the effectiveness of Teaching Factory implementation in improving the competence and skills of students in the field of entrepreneurship. The method used in this research is case study. Key informants were determined purposively in charge of teaching factory, students, and teachers who teach in productive subject. The results achieved in this study are: 1) culinary and hospitality units are the most active groups in producing products for teaching factory, 2) the role of entrepreneurial groups in each unit of production in order to increase productivity 3) students earn revenues of teaching factory and production unit get percentage of product or service sales, 3) the role of each production unit determines the level of teaching factory effectiveness.

Effects of public health interventions on industrial emissions and ambient air in Cartagena, Spain.

PubMed

Cirera, Lluís; Rodríguez, Miguel; Giménez, Joaquín; Jiménez, Enrique; Saez, Marc; Guillén, José-Jesús; Medrano, José; Martínez-Victoria, María-Aurelia; Ballester, Ferran; Moreno-Grau, Stella; Navarro, Carmen

2009-03-01

Ten years of public health interventions on industrial emissions to clean air were monitored for the Mediterranean city of Cartagena. During the 1960s, a number of large chemical and non-ferrous metallurgical factories were established that significantly deteriorated the city's air quality. By the 1970s, the average annual air concentration of sulfur dioxide (SO2) ranged from 200 to 300 microg/m3 (standard conditions units). In 1979, the Spanish government implemented an industrial intervention plan to improve the performance of factories and industrial air pollution surveillance. Unplanned urban development led to residential housing being located adjacent to three major factories. Factory A produced lead, factory B processed zinc from ore concentrates, and factory C produced sulfuric acid and phosphates. This, in combination with the particular abrupt topography and frequent atmospheric thermal inversions, resulted in the worsening of air quality and heightening concern for public health. In 1990, the City Council authorized the immediate intervention at these factories to reduce or shut down production if ambient levels of SO2 or total suspended particles (TSP) exceeded a time-emission threshold in pre-established meteorological contexts. The aim of this research was to assess the appropriateness and effectiveness of the intervention plan implemented from 1992 to 2001 to abate industrial air pollution. The maximum daily 1-h ambient air level of SO2, NO2, and TSP pollutants was selected from one of the three urban automatic stations, designed to monitor ambient air quality around industrial emissions sources. The day on which an intervention took place to reduce and/or interrupt industrial production by factory and pollutant was defined as a control day, and the day after an intervention as a post-control day. To assess the short-term intervention effect on air quality, an ecological time series design was applied, using regression analysis in generalized additive models, focusing on day-to-day variations of ambient air pollutants levels. Two indicators were estimated: (a) appropriateness, the ratio between mean levels of the pollutant for control days versus the other days, and (b) effectiveness, the ratio between mean levels of the pollutant for post-control days versus the other days. Ratios in regression analyses were adjusted for trend, seasonality, temperature, humidity and atmospheric pressure, calendar day, and special events as well as the other pollutants. A total of 702 control days were made on the factories' industrial production during the 10-year period. Fifteen reductions and five shutdown control days took place at factory A for ambient air SO2. At factory B, more controls were carried out for the SO2 pollutant in the years 1992-1993 and 1997. At factory C, the control days for SO2 decreased from 59 reductions and 14 shutdowns to a minimum from 1995 onwards, whereas the controls on TSP were more frequent, reaching a maximum of 99 reductions and 47 shutdowns in the last year. SO2 ambient air mean levels ranged from 456 to 699 microg/m(3) among factories on reduction control days and between 624 and 1,010 microg/m(3) on shutdown days. The TSP ambient air mean levels were 428 and 506 microg/m(3) on reduction and shutdown days, respectively. For all types of control days and factories, a mean ratio of 104% (95% confidence interval [CI] 88 to 121) in SO(2) levels was obtained and a mean ratio of 67% (95% CI 59 to 75) in TSP levels. Post-control days at all factories showed a mean ratio of -16% (95% CI -7 to -24) in SO(2) levels and a mean ratio of -13% (95% CI -7 to -19) in TSP levels. Interventions on industrial production based on the urban SO(2) and TSP ambient air levels were justified by the high concentrations detected. The best assessment of the interventions' effectiveness would have been to utilize the ambient air pollutant concentration readings from the entire time of the production shutdowns or reductions; however, the daily hourly maximum turned out to be a useful indicator because of meteorological factors influencing the diurnal concentration profile. A substantial number of interventions were carried out from 1 to 3 AM: , when vehicular traffic was minimum. On the other hand, atmospheric stability undergoes diurnal cycling in the autumn-winter period due to thermal inversion, which reaches maximum levels around daybreak. Therefore, this increases the ambient air levels and justified the interventions carried out at daybreak in spite of the traffic influence. All the interventions for SO(2) and TSP were carried out when the measured ambient air levels of pollutants were exceeded, which shows the appropriateness of the intervention program. This excess was greater when intervening on SO(2) than on the TSP levels. For both ambient air levels of SO(2) and TSP, significant drops in air pollution were achieved from all three factories following activity reductions. The production shutdown controls were very effective, because they returned excess levels, higher than in the reduction controls, to everyday mean values. The Cartagena City observational system of intermittent control has proven to effectively reduce industrial emissions' impact on ambient air quality. This experienced model approach could serve well in highly polluted industrial settings. From a public health perspective, studies are needed to assess that the industrial interventions to control air pollution were related to healthier human populations. Legislation was needed to allow the public administration to take direct actions upon the polluting industries.

Recent Developments in Fibers for Telecommunications

NASA Astrophysics Data System (ADS)

Caronna, V.; Cocchini, F.; Collaro, A.; Cuomo, D.; Ruzzier, M.; Schiaffo, A.; Terruzzi, L.; Valls, A.

Formerly known as Pirelli Cables and Systems, Prysmian Cables & Systems was founded in 2005, incorporating all previous Pirelli assets: "same knowledge, different names." Established in 1879, the company has more than 50 factories worldwide, operating in energy and telecommunications sectors. The main fiber manufacturing facility, Fibre Ottiche Sud (FOS), located in Italy, is operating since 1984 using the outside vapor deposition (OVD) technology and adopting today a proprietary coating system, Neon Plus. More than 40 Mkm of fibers produced in all Prysmian factories have been installed worldwide until now. Research activities are extensively carried out both in the headquarters based in Milan, Italy, and in several developments in different factories. This article will present the more noticeable results achieved in the past few years in developing Prysmian products out of its different activities in telecommunications, specifically in the optical fiber sector, while leaving to published papers the description of developments in cable design and connectivity products [1, 2].

Characterization and control of thread mould in cheese.

PubMed

Basílico, J C; debasílico, M Z; Chiericatti, C; Vinderola, C G

2001-06-01

The origin of a mould responsible for the contamination of an Argentinian cheese factory was identified and several antifungal treatments were assessed. Moulds were isolated and identified from vacuum-packed hard cheeses, from the environment and from the surfaces of the factory. A suspension conidia test containing different fungicides was performed; another assay involved the fumigation with p-OH fenilsalicidamide. Only Phoma glomerata was found in all of the mouldy cheeses, and was also obtained from different environments and machine surfaces. The most effective treatments against P. glomerata isolates were 0.5% (w/v) natamycin and 2% (v/v) parabens. Fumigation with p-OH fenilsalicidamide showed no satisfactory results. P. glomerata is an important thread mould-contaminating agent in vacuum-packed hard cheeses. Taking into account the survival of the conidia of the P. glomerata isolates to different antifungal treatments, the sources of contamination need to be controlled by designing a good factory layout.

Research designs for studies evaluating the effectiveness of change and improvement strategies.

PubMed

Eccles, M; Grimshaw, J; Campbell, M; Ramsay, C

2003-02-01

The methods of evaluating change and improvement strategies are not well described. The design and conduct of a range of experimental and non-experimental quantitative designs are considered. Such study designs should usually be used in a context where they build on appropriate theoretical, qualitative and modelling work, particularly in the development of appropriate interventions. A range of experimental designs are discussed including single and multiple arm randomised controlled trials and the use of more complex factorial and block designs. The impact of randomisation at both group and individual levels and three non-experimental designs (uncontrolled before and after, controlled before and after, and time series analysis) are also considered. The design chosen will reflect both the needs (and resources) in any particular circumstances and also the purpose of the evaluation. The general principle underlying the choice of evaluative design is, however, simple-those conducting such evaluations should use the most robust design possible to minimise bias and maximise generalisability.

The influence of cutting-bill requirements on lumber yield using a fractional-factorial design part II, correlation and number of part sizes

Treesearch

Urs Buehlmann; D. Earl Kline; Janice K. Wiedenbeck; R., Jr. Noble

2008-01-01

Cutting-bill requirements, among other factors, influence the yield obtained when cutting lumber into parts. The first part of this 2-part series described how different cutting-bill part sizes, when added to an existing cutting-bill, affect lumber yield, and quantified these observations. To accomplish this, the study employed linear least squares estimation technique...

Fuel treatment effects on soil chemistry and foliar physiology of three coniferous species at the Teakettle Experimental Forest, California, USA

Treesearch

Rakesh Minocha; Swathi A. Turlapati; Stephanie Long; Malcolm North

2013-01-01

A full factorial design crossing overstory (O) and understory (U) thinning and prescribed burning (B) was started at Teakettle Experimental Forest, California, in 2001 with the aim of achieving shifts in species composition to favor fire-resistant pines over fir. The goal of the present study was to evaluate the use of metabolic changes as early indicators for...

Estimation of rumen outflow in dairy cows fed grass silage-based diets by use of reticular sampling as an alternative to sampling from the omasal canal

USDA-ARS?s Scientific Manuscript database

TA study was conducted to compare nutrient flows determined by a reticular sampling technique with those made by sampling of digesta from the omasal canal. Six lactating dairy cows fitted with ruminal cannulas were used in a design with a 3 x 2 factorial arrangement of treatments and 4 periods. Trea...

Short-term effects of silviculture on breeding birds in William B. Bankhead National Forest

Treesearch

Jill M. Wick; Yong Wang; Callie Jo Schweitzer

2013-01-01

We evaluated the changes in the bird community in relation to six disturbance treatments in the William B. Bankhead National Forest, AL. The study design is randomized complete block with a factorial arrangement of three thinning levels [no thin, 11 m²/ha residual basal area (BA), and 17 m²/ha residual BA] and two burn treatments (burn and no burn),...

"I Forgot I Wasn't Saving the World": The Use of Formative and Summative Assessment in Instructional Video Games for Undergraduate Biology

ERIC Educational Resources Information Center

Lookadoo, Kathryn L.; Bostwick, Eryn N.; Ralston, Ryan; Elizondo, Francisco Javier; Wilson, Scott; Shaw, Tarren J.; Jensen, Matthew L.

2017-01-01

This study examined the role of formative and summative assessment in instructional video games on student learning and engagement. A 2 (formative feedback: present vs absent) × 2 (summative feedback: present vs absent) factorial design with an offset control (recorded lecture) was conducted to explore the impacts of assessment in video games. A…

15. WEST SIDE OF 1900 BLOCK, PACIFIC AVE. FROM RIGHT; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. WEST SIDE OF 1900 BLOCK, PACIFIC AVE. FROM RIGHT; 1920-22 PACIFIC AVE., WIEGAL COMPANY CANDY FACTORY (1904); 1924-26 PACIFIC AVE., CAMPBELL BUILDING (DAVIS BUILDING) (1890); 1928-30 PACIFIC AVE., REESE-CRANDALL & REDMAN BUILDING, (1890); 1932-36 PACIFIC AVE., MC DONALD & SMITH BUILDING (1890); 1938-48 PACIFIC AVE., F.S. HARMON COMPANY WAREHOUSE (1908), DESIGNED BY CARL AUGUST DARMER. - Union Depot Area Study, Tacoma, Pierce County, WA

Assessing Time Management Skills as an Important Aspect of Student Learning: The Construction and Evaluation of a Time Management Scale with Spanish High School Students

ERIC Educational Resources Information Center

Garcia-Ros, Rafael; Perez-Gonzalez, Francisco; Hinojosa, Eugenia

2004-01-01

The main purpose of this study is to analyse the factorial structure, psychometric properties and predictive capacity for academic achievement of a scale designed to evaluate the time management skills of Spanish high school students. An adaptation of the Time Management Questionnaire was presented to two samples of 350 Spanish high school…

Study on light and thermal energy of illumination device for plant factory design

NASA Astrophysics Data System (ADS)

Yoshida, A.; Moriuchi, K.; Ueda, Y.; Kinoshita, S.

2018-01-01

To investigate the effect of illumination devices on the yield of crops cultivated in a plant factory, it is necessary to measure the actual cultivation environmental factors related to the plant growth and understand the distribution ratio of light and thermal energy to the electrical energy injected into the illumination device. Based on cultivation results, we found that light intensity greatly affected the growth of plant weight. Regarding the selection of illumination device, its spectral components also affected the morphological change. Lighting experiments using a high frequency (Hf) fluorescent lamp and a light emitting diode (LED) bulb were performed. A certain difference was found in the distribution ratio of light energy to electrical energy between Hf and LED. It was showed that by placing the safety equipment or internal circuits outside the cultivated site, the air conditioning load could be reduced.

Synthesis and factorial design applied to a novel chitosan/sodium polyphosphate nanoparticles via ionotropic gelation as an RGD delivery system.

PubMed

Kiilll, Charlene Priscila; Barud, Hernane da Silva; Santagneli, Sílvia Helena; Ribeiro, Sidney José Lima; Silva, Amélia M; Tercjak, Agnieszka; Gutierrez, Junkal; Pironi, Andressa Maria; Gremião, Maria Palmira Daflon

2017-02-10

Chitosan nanoparticles have been extensively studied for both drug and protein/peptide delivery. The aim of this study was to develop an optimized chitosan nanoparticle, by ionotropic gelation method, using 3 2 full factorial design with a novel polyanion, sodium polyphosphate, well known under the trade name Graham salt. The effects of these parameters on the particle size, zeta potential, and morphology and association efficiency were investigated. The optimized nanoparticles showed an estimated size of 166.20±1.95nm, a zeta potential of 38.7±1.2mV and an efficacy of association of 97.0±2.4%. The Atomic Force Microscopy (AFM) and Scanning Electronic Microscopy (SEM) revealed spherical nanoparticles with uniform size. Molecular interactions among the components of the nanoparticles and peptide were evaluated by Fourier Transform Infrared Spectra (FTIR) and Differential Scanning Calorimetry (DSC). The obtained results indicated that, the developed nanoparticles demonstrated high biocompatible, revealing no or low toxicity in the human cancer cell line (Caco-2). In conclusion, this work provides parameters that contribute to production of chitosan nanoparticles and sodium polyphosphate with desirable size, biocompatible and enabling successful use for protein/peptides delivery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Modular transportable superconducting magnetic energy systems

NASA Technical Reports Server (NTRS)

Lieurance, Dennis; Kimball, Foster; Rix, Craig

1995-01-01

Design and cost studies were performed for the magnet components of mid-size (1-5 MWh), cold supported SMES systems using alternative configurations. The configurations studied included solenoid magnets, which required onsite assembly of the magnet system, and toroid and racetrack configurations which consisted of factory assembled modules. For each configuration, design concepts and cost information were developed for the major features of the magnet system including the conductor, electrical insulation, and structure. These studies showed that for mid-size systems, the costs of solenoid and toroid magnet configurations are comparable and that the specific configuration to be used for a given application should be based upon customer requirements such as limiting stray fields or minimizing risks in development or construction.

Modular transportable superconducting magnetic energy systems

NASA Astrophysics Data System (ADS)

Lieurance, Dennis; Kimball, Foster; Rix, Craig

1995-04-01

Design and cost studies were performed for the magnet components of mid-size (1-5 MWh), cold supported SMES systems using alternative configurations. The configurations studied included solenoid magnets, which required onsite assembly of the magnet system, and toroid and racetrack configurations which consisted of factory assembled modules. For each configuration, design concepts and cost information were developed for the major features of the magnet system including the conductor, electrical insulation, and structure. These studies showed that for mid-size systems, the costs of solenoid and toroid magnet configurations are comparable and that the specific configuration to be used for a given application should be based upon customer requirements such as limiting stray fields or minimizing risks in development or construction.

Impact of a private sector living wage intervention on depressive symptoms among apparel workers in the Dominican Republic: a quasi-experimental study

PubMed Central

Burmaster, Katharine B; Landefeld, John C; Rehkopf, David H; Lahiff, Maureen; Sokal-Gutierrez, Karen; Adler-Milstein, Sarah; Fernald, Lia C H

2015-01-01

Objectives Poverty reduction interventions through cash transfers and microcredit have had mixed effects on mental health. In this quasi-experimental study, we evaluate the effect of a living wage intervention on depressive symptoms of apparel factory workers in the Dominican Republic. Setting Two apparel factories in the Dominican Republic. Participants The final sample consisted of 204 hourly wage workers from the intervention (99) and comparison (105) factories. Interventions In 2010, an apparel factory began a living wage intervention including a 350% wage increase and significant workplace improvements. The wage increase was plausibly exogenous because workers were not aware of the living wage when applying for jobs and expected to be paid the usual minimum wage. These individuals were compared with workers at a similar local factory paying minimum wage, 15–16 months postintervention. Primary outcome measures Workers’ depressive symptoms were assessed using the Center for Epidemiologic Studies-Depression Scale (CES-D). Ordinary least squares and Poisson regressions were used to evaluate treatment effect of the intervention, adjusted for covariates. Results Intervention factory workers had fewer depressive symptoms than comparison factory workers (unadjusted mean CES-D scores: 10.6±9.3 vs 14.7±11.6, p=0.007). These results were sustained when controlling for covariates (β=−5.4, 95% CI −8.5 to −2.3, p=0.001). In adjusted analyses using the standard CES-D clinical cut-off of 16, workers at the intervention factory had a 47% reduced risk of clinically significant levels of depressive symptoms compared with workers at the comparison factory (23% vs 40%). Conclusions Policymakers have long grappled with how best to improve mental health among populations in low-income and middle-income countries. We find that providing a living wage and workplace improvements to improve income and well-being in a disadvantaged population is associated with reduced depressive symptoms. PMID:26238394

Development of Energy Models for Production Systems and Processes to Inform Environmentally Benign Decision-Making

NASA Astrophysics Data System (ADS)

Diaz-Elsayed, Nancy

Between 2008 and 2035 global energy demand is expected to grow by 53%. While most industry-level analyses of manufacturing in the United States (U.S.) have traditionally focused on high energy consumers such as the petroleum, chemical, paper, primary metal, and food sectors, the remaining sectors account for the majority of establishments in the U.S. Specifically, of the establishments participating in the Energy Information Administration's Manufacturing Energy Consumption Survey in 2006, the non-energy intensive" sectors still consumed 4*109 GJ of energy, i.e., one-quarter of the energy consumed by the manufacturing sectors, which is enough to power 98 million homes for a year. The increasing use of renewable energy sources and the introduction of energy-efficient technologies in manufacturing operations support the advancement towards a cleaner future, but having a good understanding of how the systems and processes function can reduce the environmental burden even further. To facilitate this, methods are developed to model the energy of manufacturing across three hierarchical levels: production equipment, factory operations, and industry; these methods are used to accurately assess the current state and provide effective recommendations to further reduce energy consumption. First, the energy consumption of production equipment is characterized to provide machine operators and product designers with viable methods to estimate the environmental impact of the manufacturing phase of a product. The energy model of production equipment is tested and found to have an average accuracy of 97% for a product requiring machining with a variable material removal rate profile. However, changing the use of production equipment alone will not result in an optimal solution since machines are part of a larger system. Which machines to use, how to schedule production runs while accounting for idle time, the design of the factory layout to facilitate production, and even the machining parameters --- these decisions affect how much energy is utilized during production. Therefore, at the facility level a methodology is presented for implementing priority queuing while accounting for a high product mix in a discrete event simulation environment. A baseline case is presented and alternative factory designs are suggested, which lead to energy savings of approximately 9%. At the industry level, the majority of energy consumption for manufacturing facilities is utilized for machine drive, process heating, and HVAC. Numerous studies have characterized the energy of manufacturing processes and HVAC equipment, but energy data is often limited for a facility in its entirety since manufacturing companies often lack the appropriate sensors to track it and are hesitant to release this information for confidentiality purposes. Without detailed information about the use of energy in manufacturing sites, the scope of factory studies cannot be adequately defined. Therefore, the breakdown of energy consumption of sectors with discrete production is presented, as well as a case study assessing the electrical energy consumption, greenhouse gas emissions, their associated costs, and labor costs for selected sites in the United States, Japan, Germany, China, and India. By presenting energy models and assessments of production equipment, factory operations, and industry, this dissertation provides a comprehensive assessment of energy trends in manufacturing and recommends methods that can be used beyond these case studies and industries to reduce consumption and contribute to an energy-efficient future.

On The Modeling of Educational Systems: II

ERIC Educational Resources Information Center

Grauer, Robert T.

1975-01-01

A unified approach to model building is developed from the separate techniques of regression, simulation, and factorial design. The methodology is applied in the context of a suburban school district. (Author/LS)

Knowledge, attitudes and beliefs about HIV infection and AIDS among healthy factory workers and their wives, Kinshasa, Zaire.

PubMed

Irwin, K; Bertrand, J; Mibandumba, N; Mbuyi, K; Muremeri, C; Mukoka, M; Munkolenkole, K; Nzilambi, N; Bosenge, N; Ryder, R

1991-01-01

As a first step in designing an AIDS prevention program at a large factory in Kinshasa, Zaire, we collected information on attitudes towards human immunodeficiency virus (HIV) infection and acquired immunodeficiency syndrome (AIDS) from factory foremen and their wives. Trained moderators conducted twelve focus group discussions (from November through December 1987) that addressed knowledge, attitudes and beliefs about HIV infection and AIDS. In general, participants were familiar with HIV infection and AIDS and considered these conditions leading health problems in Kinshasa. Although participants had a fairly accurate understanding of the causes of HIV infection, modes of transmission and preventive measures, many myths and misconceptions existed. Many participants did not believe that condom use would consistently prevent infection through sexual intercourse. Participants strongly favored the counseling of seropositive persons but showed less consensus about whether the spouse of a seropositive person should be notified of the partner's test result. Participants predicted that couples in which one member is seropositive and the other is not would experience marital discord and friction with family, neighbors and co-workers. These findings were applied to the development of a counseling and educational program for seropositive factory employees and their spouses.

Survey of Nitrate Ion Concentrations in Vegetables Cultivated in Plant Factories: Comparison with Open-Culture Vegetables.

PubMed

Oka, Yuka; Hirayama, Izumi; Yoshikawa, Mitsuhide; Yokoyama, Tomoko; Iida, Kenji; Iwakoshi, Katsushi; Suzuki, Ayana; Yanagihara, Midori; Segawa, Yukino; Kukimoto, Sonomi; Hamada, Humika; Matsuzawa, Satomi; Tabata, Setsuko; Sasamoto, Takeo

2017-01-01

A survey of nitrate-ion concentrations in plant-factory-cultured leafy vegetables was conducted. 344 samples of twenty-one varieties of raw leafy vegetables were examined using HPLC. The nitrate-ion concentrations in plant-factory-cultured leafy vegetables were found to be LOD-6,800 mg/kg. Furthermore, the average concentration values varied among different leafy vegetables. The average values for plant-factory-cultured leafy vegetables were higher than those of open-cultured leafy vegetables reported in previous studies, such as the values listed in the Standard Tables of Food Composition in Japan- 2015 - (Seventh revised edition). For some plant-factory-cultured leafy vegetables, such as salad spinach, the average values were above the maximum permissible levels of nitrate concentration in EC No 1258/2011; however, even when these plant-factory-cultured vegetables were routinely eaten, the intake of nitrate ions in humans did not exceed the ADI.

The Walking Interventions Through Texting (WalkIT) Trial: Rationale, Design, and Protocol for a Factorial Randomized Controlled Trial of Adaptive Interventions for Overweight and Obese, Inactive Adults

PubMed Central

Hurley, Jane C; Hollingshead, Kevin E; Todd, Michael; Jarrett, Catherine L; Tucker, Wesley J; Angadi, Siddhartha S

2015-01-01

Background Walking is a widely accepted and frequently targeted health promotion approach to increase physical activity (PA). Interventions to increase PA have produced only small improvements. Stronger and more potent behavioral intervention components are needed to increase time spent in PA, improve cardiometabolic risk markers, and optimize health. Objective Our aim is to present the rationale and methods from the WalkIT Trial, a 4-month factorial randomized controlled trial (RCT) in inactive, overweight/obese adults. The main purpose of the study was to evaluate whether intensive adaptive components result in greater improvements to adults’ PA compared to the static intervention components. Methods Participants enrolled in a 2x2 factorial RCT and were assigned to one of four semi-automated, text message–based walking interventions. Experimental components included adaptive versus static steps/day goals, and immediate versus delayed reinforcement. Principles of percentile shaping and behavioral economics were used to operationalize experimental components. A Fitbit Zip measured the main outcome: participants’ daily physical activity (steps and cadence) over the 4-month duration of the study. Secondary outcomes included self-reported PA, psychosocial outcomes, aerobic fitness, and cardiorespiratory risk factors assessed pre/post in a laboratory setting. Participants were recruited through email listservs and websites affiliated with the university campus, community businesses and local government, social groups, and social media advertising. Results This study has completed data collection as of December 2014, but data cleaning and preliminary analyses are still in progress. We expect to complete analysis of the main outcomes in late 2015 to early 2016. Conclusions The Walking Interventions through Texting (WalkIT) Trial will further the understanding of theory-based intervention components to increase the PA of men and women who are healthy, insufficiently active and are overweight or obese. WalkIT is one of the first studies focusing on the individual components of combined goal setting and reward structures in a factorial design to increase walking. The trial is expected to produce results useful to future research interventions and perhaps industry initiatives, primarily focused on mHealth, goal setting, and those looking to promote behavior change through performance-based incentives. Trial Registration ClinicalTrials.gov NCT02053259; https://clinicaltrials.gov/ct2/show/NCT02053259 (Archived by WebCite at http://www.webcitation.org/6b65xLvmg). PMID:26362511

Poor but Not Powerless: Women Workers in Production Chain Factories in China

ERIC Educational Resources Information Center

Ma, Lang; Jacobs, Francine

2010-01-01

The present study demonstrates the processes by which 12 young women working in four production chain factories in China shape their own lives--their developmental trajectories--during the period following their entry into factory work. One-on-one, in-depth, semi-structured interviews were conducted in August, 2005, as part of an evaluation…

Life cycle inventory for palm based plywood: A gate-to-gate case study

NASA Astrophysics Data System (ADS)

Ahmad, Shamim; Sahid, Ismail; Subramaniam, Vijaya; Muhamad, Halimah; Mokhtar, Anis

2013-11-01

The oil palm industry heavily relies on the world market. It is essential to ensure that the oil palm industry is ready to meet the demands and expectation of these overseas customers on the environmental performance of the oil palm industry. Malaysia produces 13.9 million tons of oil palm biomass including oil palm trunk (OPT), frond and empty fruits bunches (EFB) annually. OPT felled in some oil palm plantations during replanting is transported to various industries and one such industry is the plywood factories. In order to gauge the environmental performance of the use of OPT as plywood a Life Cycle Assessment (LCA) study was conducted for palm based plywood. LCA is an important tool to assess the environmental performance of a product or process. Life cycle inventory (LCI) is the heart of a LCA study. This LCI study has a gate-to-gate system boundary and the functional unit is 1 m3 palm plywood produced and covers three types of plywood; Moisture Resistance Plywood (MR), Weather Boiling Proof Plywood Grade 1 (WBP Grade 1) at Factory D and Weather Boiling Proof Plywood Grade 2 (WBP Grade 2) at Factory E. Both factories use two different types of drying processes; conventional drying at Factory D and kiln drying at Factory E. This inventory data was collected from two factories (D and E) representing 40% of Malaysia palm plywood industry. The inputs are mainly the raw materials which are the oil palm trunks and tropical wood veneers and the energy from diesel and electricity from grid which is mainly used for the drying process. The other inputs include water, urea formaldehyde, phenol formaldehyde, flour and melamine powder. The outputs are the biomass waste which consists of oil palm trunk off-cut and emission from boiler. Generally, all types of plywood production use almost same materials and processing methods in different quantities. Due to the different process efficiency, Factory D uses less input of raw materials and energy compared to Factory E.

Improving Light Distribution by Zoom Lens for Electricity Savings in a Plant Factory with Light-Emitting Diodes.

PubMed

Li, Kun; Li, Zhipeng; Yang, Qichang

2016-01-01

The high energy consumption of a plant factory is the biggest issue in its rapid expansion, especially for lighting electricity, which has been solved to a large extent by light-emitting diodes (LED). However, the remarkable potential for further energy savings remains to be further investigated. In this study, an optical system applied just below the LED was designed. The effects of the system on the growth and photosynthesis of butterhead lettuce (Lactuca sativa var. capitata) were examined, and the performance of the optical improvement in energy savings was evaluated by comparison with the traditional LED illumination mode. The irradiation patterns used were LED with zoom lenses (Z-LED) and conventional non-lenses LED (C-LED). The seedlings in both treatments were exposed to the same light environment over the entire growth period. The improvement saved over half of the light source electricity, while prominently lowering the temperature. Influenced by this, the rate of photosynthesis sharply decreased, causing reductions in plant yield and nitrate content, while having no negative effects on morphological parameters and photosynthetic pigment contents. Nevertheless, the much higher light use efficiency of Z-LEDs makes this system a better approach to illumination in a plant factory with artificial lighting.

Improving Light Distribution by Zoom Lens for Electricity Savings in a Plant Factory with Light-Emitting Diodes

PubMed Central

Li, Kun; Li, Zhipeng; Yang, Qichang

2016-01-01

The high energy consumption of a plant factory is the biggest issue in its rapid expansion, especially for lighting electricity, which has been solved to a large extent by light-emitting diodes (LED). However, the remarkable potential for further energy savings remains to be further investigated. In this study, an optical system applied just below the LED was designed. The effects of the system on the growth and photosynthesis of butterhead lettuce (Lactuca sativa var. capitata) were examined, and the performance of the optical improvement in energy savings was evaluated by comparison with the traditional LED illumination mode. The irradiation patterns used were LED with zoom lenses (Z-LED) and conventional non-lenses LED (C-LED). The seedlings in both treatments were exposed to the same light environment over the entire growth period. The improvement saved over half of the light source electricity, while prominently lowering the temperature. Influenced by this, the rate of photosynthesis sharply decreased, causing reductions in plant yield and nitrate content, while having no negative effects on morphological parameters and photosynthetic pigment contents. Nevertheless, the much higher light use efficiency of Z-LEDs makes this system a better approach to illumination in a plant factory with artificial lighting. PMID:26904062

Studies for a Dedicated B Detector at the Fermilab Collider

NASA Astrophysics Data System (ADS)

McBride, Patricia

1996-06-01

The observation of CP violation in the B system is one of the great experimental challenges of the next decade. Several B factories are already planned, however, there will be many interesting measurements awaiting a second generation of B exeriments. Studies are being carried out to design a dedicated collider B experiment for the Tevatron at Fermilab. A dedicated B detector at a hadron collider will have a physics reach beyond that of experiments scheduled to begin operation before the end of the decade.

Rapid Prototyping of Microbial Cell Factories via Genome-scale Engineering

PubMed Central

Si, Tong; Xiao, Han; Zhao, Huimin

2014-01-01

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. PMID:25450192

Information security of Smart Factories

NASA Astrophysics Data System (ADS)

Iureva, R. A.; Andreev, Y. S.; Iuvshin, A. M.; Timko, A. S.

2018-05-01

In several years, technologies and systems based on the Internet of things (IoT) will be widely used in all smart factories. When processing a huge array of unstructured data, their filtration and adequate interpretation are a priority for enterprises. In this context, the correct representation of information in a user-friendly form acquires special importance, for which the market today presents advanced analytical platforms designed to collect, store and analyze data on technological processes and events in real time. The main idea of the paper is the statement of the information security problem in IoT and integrity of processed information.

Spray drying of budesonide, formoterol fumarate and their composites-II. Statistical factorial design and in vitro deposition properties.

PubMed

Tajber, L; Corrigan, O I; Healy, A M

2009-02-09

The aim of this study was to investigate the effect of changing spray drying parameters on the production of a budesonide/formoterol fumarate 100:6 (w/w) composite. The systems were spray dried as solutions from 95% ethanol/5% water (v/v) using a Büchi 191-Mini Spray Dryer. A 2(5-1) factorial design study was undertaken to assess the consequence of altering spray drying processing variables on particle characteristics. The processing parameters that were studied were inlet temperature, spray drier airflow rate, pump rate, aspirator setting and feed concentration. Each batch of the resulting powder was characterised in terms of thermal and micromeritic properties as well as an in vitro deposition by twin impinger analysis. Overall, the parameter that had the greatest influence on each response investigated was production yield - airflow (higher airflow giving greater yields), median particle size - airflow (higher airflow giving smaller particle sizes) and Carr's compressibility index - feed concentration (lower feed concentration giving smaller Carr's indices). A six- to seven-fold difference in respirable fraction can be observed by changing the spray drying process parameters. The co-spray dried composite system which displayed best in vitro deposition characteristics, showed a 2.6-fold increase in respirable fraction in the twin impinger experiments and better dose uniformity compared with the physical mix of micronised powders.

Studies on a novel doughnut-shaped minitablet for intraocular drug delivery.

PubMed

Choonara, Yahya E; Pillay, Viness; Carmichael, Trevor; Danckwerts, Michael P

2007-12-28

The objective of this study was to evaluate the effect of 2 independent formulation variables on the drug release from a novel doughnut-shaped minitablet (DSMT) in order to optimize formulations for intraocular drug delivery. Formulations were based on a 3(2) full-factorial design. The 2 independent variables were the concentration of Resomer (% wt/wt) and the type of Resomer grade (RG502, RG503, and RG504), respectively. The evaluated response was the drug release rate constant computed from a referenced marketed product and in vitro drug release data obtained at pH 7.4 in simulated vitreous humor. DSMT devices were prepared containing either of 2 model drugs, ganciclovir or foscarnet, using a Manesty F3 tableting press fitted with a novel central-rod, punch, and die setup. Dissolution data revealed biphasic drug release behavior with 55% to 60% drug released over 120 days. The inherent viscosity of the various Resomer grades and the concentration were significant to achieve optimum release rate constants. Using the resultant statistical relationships with the release rate constant as a response, the optimum formulation predicted for devices formulated with foscarnet was 70% wt/wt of Resomer RG504, while 92% wt/wt of Resomer RG503 was ideal for devices formulated with ganciclovir. The results of this study revealed that the full-factorial design was a suitable tool to predict an optimized formulation for prolonged intraocular drug delivery.

Factorial design applied to the optimization of lipid composition of topical antiherpetic nanoemulsions containing isoflavone genistein

PubMed Central

Argenta, Débora Fretes; de Mattos, Cristiane Bastos; Misturini, Fabíola Dallarosa; Koester, Leticia Scherer; Bassani, Valquiria Linck; Simões, Cláudia Maria Oliveira; Teixeira, Helder Ferreira

2014-01-01

The aim of this study was to optimize topical nanoemulsions containing genistein, by means of a 23 full factorial design based on physicochemical properties and skin retention. The experimental arrangement was constructed using oil type (isopropyl myristate or castor oil), phospholipid type (distearoylphosphatidylcholine [DSPC] or dioleylphosphaditylcholine [DOPC]), and ionic cosurfactant type (oleic acid or oleylamine) as independent variables. The analysis of variance showed effect of third order for particle size, polydispersity index, and skin retention of genistein. Nanoemulsions composed of isopropyl myristate/DOPC/oleylamine showed the smallest diameter and highest genistein amount in porcine ear skin whereas the formulation composed of isopropyl myristate/DSPC/oleylamine exhibited the lowest polydispersity index. Thus, these two formulations were selected for further studies. The formulations presented positive ζ potential values (>25 mV) and genistein content close to 100% (at 1 mg/mL). The incorporation of genistein in nanoemulsions significantly increased the retention of this isoflavone in epidermis and dermis, especially when the formulation composed by isopropyl myristate/DOPC/oleylamine was used. These results were supported by confocal images. Such formulations exhibited antiherpetic activity in vitro against herpes simplex virus 1 (strain KOS) and herpes simplex virus 22 (strain 333). Taken together, the results show that the genistein-loaded nanoemulsions developed in this study are promising options in herpes treatment. PMID:25336951

Synergistic Effect of Hydrotrope and Surfactant on Solubility and Dissolution of Atorvastatin Calcium: Screening Factorial Design Followed by Ratio Optimization

PubMed Central

Patel, V. F.; Sarai, J.

2014-01-01

The present study was aimed at investigating the effect of hydrotrope and surfactant on poor solubility of atorvastatin calcium. Excipients screening followed by factorial design was performed to study effect of excipients and manufacturing methods on solubility of drug. Three independent factors (carrier, surfactant and manufacturing method) were evaluated at two levels using solubility as a dependant variable. Solid-state characterisation was performed using Fourier transform infrared spectroscopy and differential scanning calorimetry. Optimised complex were incorporated into orally disintegrating micro tablets and in vitro dissolution test was performed. Nicotinamide, Plasdone and sodium dodecyl sulphate were emerged as promising excipients from excipient screening. General regression analysis revealed only the type of carrier has significantly enhanced (P<0.05) the solubility of drug while other factors were found to be nonsignificant. Ratio optimisation trial revealed that drug to nicotinamide ratio is more critical in enhancing the solubility of drug (40 fold increases in solubility compared to pure drug) in comparison to drug-surfactant ratio; however the presence of surfactant deemed essential. Significantly higher rate and extent of dissolution was observed from solid dispersion complex and tablets compared to dissolution of pure drug (P<0.05). Study revealed hydrotrope and surfactant have synergistic effect on solubility and dissolution of atorvastatin calcium and this can be explored further. PMID:25593381

Formulation and optimization of coated PLGA – Zidovudine nanoparticles using factorial design and in vitro in vivo evaluations to determine brain targeting efficiency

PubMed Central

Peter Christoper, G.V.; Vijaya Raghavan, C.; Siddharth, K.; Siva Selva Kumar, M.; Hari Prasad, R.

2013-01-01

In the current study zidovudine loaded PLGA nanoparticles were prepared, coated and further investigated for its effectiveness in brain targeting. IR and DSC studies were performed to determine the interaction between excipients used and to find out the nature of drug in the formulation. Formulations were prepared by adopting 23 factorial designs to evaluate the effects of process and formulation variables. The prepared formulations were subjected for in vitro and in vivo evaluations. In vitro evaluations showed particle size below 100 nm, entrapment efficiency of formulations ranges of 28–57%, process yield of 60–76% was achieved and drug release for the formulations were in the range of 50–85%. The drug release from the formulations was found to follow Higuchi release pattern, n–value obtained after Korsemeyer plot was in the range of 0.56–0.78. In vivo evaluations were performed in mice after intraperitoneal administration of zidovudine drug solution, uncoated and coated formulation. Formulation when coated with Tween 80 achieved a higher concentration in the brain than that of the drug in solution and of the uncoated formulation. Stability studies indicated that there was no degradation of the drug in the formulation after 90 days of preparation when stored in refrigerated condition. PMID:24648825

A Psychometric Validation of the Internal and External Motivation to Respond without Prejudice toward People with Disabilities Scale

ERIC Educational Resources Information Center

Pruett, Steven R.; Deiches, Jon; Pfaller, Joseph; Moser, Erin; Chan, Fong

2014-01-01

Objective: To determine the factorial validity of the Internal and External Motivation to Respond without Prejudice toward People with Disabilities Scale (D-IMS/EMS). Design: A quantitative descriptive design using factor analysis. Participants: 233 rehabilitation counseling and rehabilitation services students. Results: Both exploratory and…

Staying Mobile

MedlinePlus

... representatives are factory-trained accessibility specialists in ramp design and installation and will provide a free evaluation and consultation to determine what ramp is best for your needs. Video Series Free From Falls Some MS symptoms and treatments ...

[Questionnaire to assess advertising campaigns impact about HIV/AIDS prevention].

PubMed

Bretón-López, Juana; Buela-Casal, Gualberto

2006-08-01

Present work is concerned with a questionnaire aimed to the impact evaluation of a selection of Spanish advertising campaigns about HIV/AIDS prevention. The work objective is to determine reliability and factorial structure of the instrument. It is described the designed questionnaire and its three scales (affective impact scale, cognitive impact scale and behavioural intention impact scale). The sample was composed by 405 high school teenagers to who were projected the advertising campaigns. So, teenagers filled the designed questionnaire. From a theoretical and psychometric point of view, data show the instrument is appropriate about internal consistency and factorial structure. The final goal of the questionnaire is to become useful tool to assess the persuasive effectiveness of the advertising campaigns within the HIV/AIDS network, as an intervention of primary prevention to reduce the expansion of epidemic.

Agile manufacturing: The factory of the future

NASA Technical Reports Server (NTRS)

Loibl, Joseph M.; Bossieux, Terry A.

1994-01-01

The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

New approach to optimize near-infrared spectra with design of experiments and determination of milk compounds as influence factors for changing milk over time.

PubMed

De Benedictis, Lorenzo; Huck, Christian

2016-12-01

The optimization of near-infrared spectroscopic parameters was realized via design of experiments. With this new approach objectivity can be integrated into conventional, rather subjective approaches. The investigated factors are layer thickness, number of scans and temperature during measurement. Response variables in the full factorial design consisted of absorption intensity, signal-to-noise ratio and reproducibility of the spectra. Optimized factorial combinations have been found to be 0.5mm layer thickness, 64 scans and 25°C ambient temperature for liquid milk measurements. Qualitative analysis of milk indicated a strong correlation of environmental factors, as well as the feeding of cattle with respect to the change in milk composition. This was illustrated with the aid of near-infrared spectroscopy and the previously optimized parameters by detection of altered fatty acids in milk, especially by the fatty acid content (number of carboxylic functions) and the fatty acid length. Copyright © 2016 Elsevier Ltd. All rights reserved.

Factorial analysis of trihalomethanes formation in drinking water.

PubMed

Chowdhury, Shakhawat; Champagne, Pascale; McLellan, P James

2010-06-01

Disinfection of drinking water reduces pathogenic infection, but may pose risks to human health through the formation of disinfection byproducts. The effects of different factors on the formation of trihalomethanes were investigated using a statistically designed experimental program, and a predictive model for trihalomethanes formation was developed. Synthetic water samples with different factor levels were produced, and trihalomethanes concentrations were measured. A replicated fractional factorial design with center points was performed, and significant factors were identified through statistical analysis. A second-order trihalomethanes formation model was developed from 92 experiments, and the statistical adequacy was assessed through appropriate diagnostics. This model was validated using additional data from the Drinking Water Surveillance Program database and was applied to the Smiths Falls water supply system in Ontario, Canada. The model predictions were correlated strongly to the measured trihalomethanes, with correlations of 0.95 and 0.91, respectively. The resulting model can assist in analyzing risk-cost tradeoffs in the design and operation of water supply systems.

Reedsport PB150 Deployment and Ocean Test Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Phil

2016-06-03

As the first utility scale wave power project in the US, the Wave Power Demonstration Project at Reedsport (OR) was planned to consist of 10 PowerBuoys (Phase II)1, located 2.5 miles off the coast. U.S. Department of Energy (DOE) funding under a prior DOE Grant (DE-FG36-08GO88017) along with funding from PNGC Power, an Oregon-based electric power cooperative, was utilized for the design completion, fabrication, assembly and factory testing of the first PowerBuoy for the Reedsport project. The design and fabrication of the first PowerBuoy and factory testing of the power take-off subsystem were completed, and the power take-off subsystem wasmore » successfully integrated into the spar at the fabricator’s facility in Oregon. The objectives of this follow-on grant were: advance PB150B design from TRL 5/6 to TRL 7/8; deploy a single PB150 and operate autonomously for 2 years; establish O&M costs; collect environmental information; and establish manufacturing methodologies.« less

Muon Acceleration Concepts for NuMAX: "Dual-use" Linac and "Dogbone" RLA

DOE PAGES

Bogacz, S. A.

2018-02-01

In this paper, we summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival for the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to an initially low RF frequency, e.g., 325 MHz, which is then increased to 650 MHz asmore » the transverse size shrinks with increasing energy. High-gradient normal conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. Finally, we consider two cost effective schemes for accelerating muon beams for a stageable Neutrino Factory: exploration of the so-called "dual-use" linac concept, where the same linac structure is used for acceleration of both H - and muons and, alternatively, an SRF-efficient design based on a multi-pass (4.5) "dogbone" RLA, extendable to multi-pass FFAG-like arcs.« less

Microencapsulation of Theobroma cacao L. waste extract: optimization using response surface methodology.

PubMed

Gabbay Alves, Taís Vanessa; Silva da Costa, Russany; Aliakbarian, Bahar; Casazza, Alessandro Alberto; Perego, Patrizia; Carréra Silva Júnior, José Otávio; Ribeiro Costa, Roseane Maria; Converti, Attilio

2017-03-01

The cocoa extract (Theobroma cacao L.) has a significant amount of polyphenols (TP) with potent antioxidant activity (AA). This study aims to optimise microencapsulation of the extract of cocoa waste using chitosan and maltodextrin. Microencapsulation tests were performed according to a Box-Behnken factorial design, and the results were evaluated by response surface methodology with temperature, maltodextrin concentration (MD) and extract flowrate (EF) as independent variables, and the fraction of encapsulated TP, TP encapsulation yield, AA, yield of drying and solubility index as responses. The optimum conditions were: inlet temperature of 170 °C, MD of 5% and EF of 2.5 mL/min. HPLC analysis identified epicatechin as the major component of both the extract and microparticles. TP release was faster at pH 3.5 than in water. These results as a whole suggest that microencapsulation was successful and the final product can be used as a nutrient source for aquatic animal feed. Highlights Microencapsulation is optimised according to a factorial design of the Box-Behnken type. Epicatechin is the major component of both the extract and microcapsules. The release of polyphenols from microcapsules is faster at pH 3.5 than in water.

Dimensionality and construct validity of an instrument designed to measure the metacognitive orientation of science classroom learning environments.

PubMed

Thomas, Gregory P

2004-01-01

The purpose of this study was to establish the factorial construct validity and dimensionality of the Metacognitive Orientation Learning Environment Scale-Science (MOLES-S) which was designed to measure the metacognitive orientation of science classroom learning environments. The metacognitive orientation of a science classroom learning environment is the extent to which psychosocial conditions that are known to enhance students' metacognition are evident within that classroom. The development of items comprising this scale was based on a theoretical understanding of metacognition, learning environments and the development of previous learning environments instruments. Four possible hypothesized structure models, each consistent with the literature, were reviewed and their merits were compared on the basis of empirical data drawn from two populations of 1026 and 1223 Hong Kong secondary school students using confirmatory factor analysis procedures. The scale was calibrated using the Rasch rating scale model using data from the 1223 student sample. The results suggest that there is strong evidence to support the factorial construct validity of the MOLES-S but that, on the basis of the Rasch analysis, there are still suggestions for further refinement and improvement of the MOLES-S.

Power Terminal Communication Access Network Monitoring System Scheme Based on Design Patterns

NASA Astrophysics Data System (ADS)

Yan, Shengchao; Wu, Desheng; Zhu, Jiang

2018-01-01

In order to realize patterns design for terminal communication monitoring system, this paper introduces manager-workers, tasks-workers design patterns, based on common design patterns such as factory method, chain of responsibility, facade. Using these patterns, the communication monitoring system which combines module-groups like networking communication, business data processing and the peripheral support has been designed successfully. Using these patterns makes this system have great flexibility and scalability and improves the degree of systematic pattern design structure.

Adaptive laboratory evolution – principles and applications for biotechnology

PubMed Central

2013-01-01

Adaptive laboratory evolution is a frequent method in biological studies to gain insights into the basic mechanisms of molecular evolution and adaptive changes that accumulate in microbial populations during long term selection under specified growth conditions. Although regularly performed for more than 25 years, the advent of transcript and cheap next-generation sequencing technologies has resulted in many recent studies, which successfully applied this technique in order to engineer microbial cells for biotechnological applications. Adaptive laboratory evolution has some major benefits as compared with classical genetic engineering but also some inherent limitations. However, recent studies show how some of the limitations may be overcome in order to successfully incorporate adaptive laboratory evolution in microbial cell factory design. Over the last two decades important insights into nutrient and stress metabolism of relevant model species were acquired, whereas some other aspects such as niche-specific differences of non-conventional cell factories are not completely understood. Altogether the current status and its future perspectives highlight the importance and potential of adaptive laboratory evolution as approach in biotechnological engineering. PMID:23815749

Estimation of design space for an extrusion-spheronization process using response surface methodology and artificial neural network modelling.

PubMed

Sovány, Tamás; Tislér, Zsófia; Kristó, Katalin; Kelemen, András; Regdon, Géza

2016-09-01

The application of the Quality by Design principles is one of the key issues of the recent pharmaceutical developments. In the past decade a lot of knowledge was collected about the practical realization of the concept, but there are still a lot of unanswered questions. The key requirement of the concept is the mathematical description of the effect of the critical factors and their interactions on the critical quality attributes (CQAs) of the product. The process design space (PDS) is usually determined by the use of design of experiment (DoE) based response surface methodologies (RSM), but inaccuracies in the applied polynomial models often resulted in the over/underestimation of the real trends and changes making the calculations uncertain, especially in the edge regions of the PDS. The completion of RSM with artificial neural network (ANN) based models is therefore a commonly used method to reduce the uncertainties. Nevertheless, since the different researches are focusing on the use of a given DoE, there is lack of comparative studies on different experimental layouts. Therefore, the aim of present study was to investigate the effect of the different DoE layouts (2 level full factorial, Central Composite, Box-Behnken, 3 level fractional and 3 level full factorial design) on the model predictability and to compare model sensitivities according to the organization of the experimental data set. It was revealed that the size of the design space could differ more than 40% calculated with different polynomial models, which was associated with a considerable shift in its position when higher level layouts were applied. The shift was more considerable when the calculation was based on RSM. The model predictability was also better with ANN based models. Nevertheless, both modelling methods exhibit considerable sensitivity to the organization of the experimental data set, and the use of design layouts is recommended, where the extreme values factors are more represented. Copyright © 2016 Elsevier B.V. All rights reserved.

Determination of the clean-up efficiency of the solid-phase extraction of rosemary extracts: Application of full-factorial design in hyphenation with Gaussian peak fit function.

PubMed

Meischl, Florian; Kirchler, Christian Günter; Jäger, Michael Andreas; Huck, Christian Wolfgang; Rainer, Matthias

2018-02-01

We present a novel method for the quantitative determination of the clean-up efficiency to provide a calculated parameter for peak purity through iterative fitting in conjunction with design of experiments. Rosemary extracts were used and analyzed before and after solid-phase extraction using a self-fabricated mixed-mode sorbent based on poly(N-vinylimidazole/ethylene glycol dimethacrylate). Optimization was performed by variation of washing steps using a full three-level factorial design and response surface methodology. Separation efficiency of rosmarinic acid from interfering compounds was calculated using an iterative fit of Gaussian-like signals and quantifications were performed by the separate integration of the two interfering peak areas. Results and recoveries were analyzed using Design-Expert® software and revealed significant differences between the washing steps. Optimized parameters were considered and used for all further experiments. Furthermore, the solid-phase extraction procedure was tested and compared with commercial available sorbents. In contrast to generic protocols of the manufacturers, the optimized procedure showed excellent recoveries and clean-up rates for the polymer with ion exchange properties. Finally, rosemary extracts from different manufacturing areas and application types were studied to verify the developed method for its applicability. The cleaned-up extracts were analyzed by liquid chromatography with tandem mass spectrometry for detailed compound evaluation to exclude any interference from coeluting molecules. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Leveraging Avatars in 3D Virtual Environments ("Second Life") for Interactive Learning: The Moderating Role of the Behavioral Activation System "vs." Behavioral Inhibition System and the Mediating Role of Enjoyment

ERIC Educational Resources Information Center

Jin, Seung-A. Annie

2011-01-01

Within the Entertainment-Education (E-E) framework, two experiments examined the effects of avatar-based e-health education targeting college students. Study 1 (between-subjects factorial design experiment: N = 94) tested the effects of message framing in e-learning and the moderating role of students' motivational systems on their enjoyment of…

An Experimental Study of a Televised Science Series, Grades 1-4, Comparing the Quality and Sequence of Television and Classroom Questions with a Proposed Strategy of Science Instruction.

ERIC Educational Resources Information Center

Beisenherz, Paul Chalmers

The effectiveness of a televised science series used in the Seattle metropolitan area was investigated, using factorial design to provide a treatment variable representing four degrees of utilization of TV science and non-TV science. Teachers and their intact classes were randomly assigned to one of four treatment groups: TV science only, plus…

Building America Industrialized Housing Partnership (BAIHP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

McIlvaine, Janet; Chandra, Subrato; Barkaszi, Stephen

This final report summarizes the work conducted by the Building America Industrialized Housing Partnership (www.baihp.org) for the period 9/1/99-6/30/06. BAIHP is led by the Florida Solar Energy Center of the University of Central Florida and focuses on factory built housing. In partnership with over 50 factory and site builders, work was performed in two main areas--research and technical assistance. In the research area--through site visits in over 75 problem homes, we discovered the prime causes of moisture problems in some manufactured homes and our industry partners adopted our solutions to nearly eliminate this vexing problem. Through testing conducted in overmore » two dozen housing factories of six factory builders we documented the value of leak free duct design and construction which was embraced by our industry partners and implemented in all the thousands of homes they built. Through laboratory test facilities and measurements in real homes we documented the merits of 'cool roof' technologies and developed an innovative night sky radiative cooling concept currently being tested. We patented an energy efficient condenser fan design, documented energy efficient home retrofit strategies after hurricane damage, developed improved specifications for federal procurement for future temporary housing, compared the Building America benchmark to HERS Index and IECC 2006, developed a toolkit for improving the accuracy and speed of benchmark calculations, monitored the field performance of over a dozen prototype homes and initiated research on the effectiveness of occupancy feedback in reducing household energy use. In the technical assistance area we provided systems engineering analysis, conducted training, testing and commissioning that have resulted in over 128,000 factory built and over 5,000 site built homes which are saving their owners over $17,000,000 annually in energy bills. These include homes built by Palm Harbor Homes, Fleetwood, Southern Energy Homes, Cavalier and the manufacturers participating in the Northwest Energy Efficient Manufactured Home program. We worked with over two dozen Habitat for Humanity affiliates and helped them build over 700 Energy Star or near Energy Star homes. We have provided technical assistance to several show homes constructed for the International builders show in Orlando, FL and assisted with other prototype homes in cold climates that save 40% over the benchmark reference. In the Gainesville Fl area we have several builders that are consistently producing 15 to 30 homes per month in several subdivisions that meet the 30% benchmark savings goal. We have contributed to the 2006 DOE Joule goals by providing two community case studies meeting the 30% benchmark goal in marine climates.« less

Effect of experimental design on the prediction performance of calibration models based on near-infrared spectroscopy for pharmaceutical applications.

PubMed

Bondi, Robert W; Igne, Benoît; Drennen, James K; Anderson, Carl A

2012-12-01

Near-infrared spectroscopy (NIRS) is a valuable tool in the pharmaceutical industry, presenting opportunities for online analyses to achieve real-time assessment of intermediates and finished dosage forms. The purpose of this work was to investigate the effect of experimental designs on prediction performance of quantitative models based on NIRS using a five-component formulation as a model system. The following experimental designs were evaluated: five-level, full factorial (5-L FF); three-level, full factorial (3-L FF); central composite; I-optimal; and D-optimal. The factors for all designs were acetaminophen content and the ratio of microcrystalline cellulose to lactose monohydrate. Other constituents included croscarmellose sodium and magnesium stearate (content remained constant). Partial least squares-based models were generated using data from individual experimental designs that related acetaminophen content to spectral data. The effect of each experimental design was evaluated by determining the statistical significance of the difference in bias and standard error of the prediction for that model's prediction performance. The calibration model derived from the I-optimal design had similar prediction performance as did the model derived from the 5-L FF design, despite containing 16 fewer design points. It also outperformed all other models estimated from designs with similar or fewer numbers of samples. This suggested that experimental-design selection for calibration-model development is critical, and optimum performance can be achieved with efficient experimental designs (i.e., optimal designs).

Method and Tool for Design Process Navigation and Automatic Generation of Simulation Models for Manufacturing Systems

NASA Astrophysics Data System (ADS)

Nakano, Masaru; Kubota, Fumiko; Inamori, Yutaka; Mitsuyuki, Keiji

Manufacturing system designers should concentrate on designing and planning manufacturing systems instead of spending their efforts on creating the simulation models to verify the design. This paper proposes a method and its tool to navigate the designers through the engineering process and generate the simulation model automatically from the design results. The design agent also supports collaborative design projects among different companies or divisions with distributed engineering and distributed simulation techniques. The idea was implemented and applied to a factory planning process.

Study of process variables associated with manufacturing hermetically-sealed nickel-cadmium cells

NASA Technical Reports Server (NTRS)

Miller, L.; Doan, D. J.; Carr, E. S.

1971-01-01

A program to determine and study the critical process variables associated with the manufacture of aerospace, hermetically-sealed, nickel-cadmium cells is described. The determination and study of the process variables associated with the positive and negative plaque impregnation/polarization process are emphasized. The experimental data resulting from the implementation of fractional factorial design experiments are analyzed by means of a linear multiple regression analysis technique. This analysis permits the selection of preferred levels for certain process variables to achieve desirable impregnated plaque characteristics.

Long-term effects of a factory closure: unemployment and disability during ten years' follow-up.

PubMed

Westin, S; Schlesselman, J J; Korper, M

1989-01-01

The consequences of a factory closure on future employment, disability and death were investigated in a 10-year prospective follow-up study in a general practice setting. The study population consisted of 85 persons who lost their jobs when a brisling sardine factory close to Bergen in Norway was shut down in 1975. The employees of a nearby "sister factory" within the same company were chosen as a control population, consisting of 87 persons. After the factory closure, the annual employment rate of the study group showed a steady rise to a maximum level of 44% within 6 years, but even after 10 years never matched the employment rate of the controls. The cumulative rates of disability pension, granted for medical conditions only, was more than three times higher in the study group than among controls from the second through the fourth year of follow-up. This excess of disabilities then stayed relatively constant at approximately 17 per 100 persons from 5 to 10 years after the shut-down. Given present days' unemployment, the results of this investigation point to the importance of acknowledging a long-term effect of job-loss on health and social readjustment.

Use of sugarcane filter cake and nitrogen, phosphorus and potassium fertilization in the process of bioremediation of soil contaminated with diesel.

PubMed

Tellechea, Fernando Reynel Fundora; Martins, Marco Antônio; da Silva, Alexsandro Araujo; da Gama-Rodrigues, Emanuela Forestieri; Martins, Meire Lelis Leal

2016-09-01

This study evaluated the use of sugarcane filter cake and nitrogen, phosphorus and potassium (NPK) fertilization in the bioremediation of a soil contaminated with diesel fuel using a completely randomized design. Five treatments (uncontaminated soil, T1; soil contaminated with diesel, T2; soil contaminated with diesel and treated with 15 % (wt) filter cake, T3; soil contaminated with diesel and treated with NPK fertilizer, T4; and soil contaminated with diesel and treated with 15 % (wt) filter cake and NPK fertilizer, T5) and four evaluation periods (1, 60, 120, and 180 days after the beginning of the experiment) were used according to a 4 × 5 factorial design to analyze CO2 release. The variables total organic carbon (TOC) and total petroleum hydrocarbons (TPH) remaining in the soil were analyzed using a 5 × 2 factorial design, with the same treatments described above and two evaluation periods (1 and 180 days after the beginning of the experiment). In T3 and T5, CO2 release was significantly higher, compared with the other treatments. Significant TPH removal was observed on day 180, when percent removal values were 61.9, 70.1, 68.2, and 75.9 in treatments T2, T3, T4, and T5, respectively, compared with the initial value (T1).

The Genome-Based Metabolic Systems Engineering to Boost Levan Production in a Halophilic Bacterial Model.

PubMed

Aydin, Busra; Ozer, Tugba; Oner, Ebru Toksoy; Arga, Kazim Yalcin

2018-03-01

Metabolic systems engineering is being used to redirect microbial metabolism for the overproduction of chemicals of interest with the aim of transforming microbial hosts into cellular factories. In this study, a genome-based metabolic systems engineering approach was designed and performed to improve biopolymer biosynthesis capability of a moderately halophilic bacterium Halomonas smyrnensis AAD6 T producing levan, which is a fructose homopolymer with many potential uses in various industries and medicine. For this purpose, the genome-scale metabolic model for AAD6 T was used to characterize the metabolic resource allocation, specifically to design metabolic engineering strategies for engineered bacteria with enhanced levan production capability. Simulations were performed in silico to determine optimal gene knockout strategies to develop new strains with enhanced levan production capability. The majority of the gene knockout strategies emphasized the vital role of the fructose uptake mechanism, and pointed out the fructose-specific phosphotransferase system (PTS fru ) as the most promising target for further metabolic engineering studies. Therefore, the PTS fru of AAD6 T was restructured with insertional mutagenesis and triparental mating techniques to construct a novel, engineered H. smyrnensis strain, BMA14. Fermentation experiments were carried out to demonstrate the high efficiency of the mutant strain BMA14 in terms of final levan concentration, sucrose consumption rate, and sucrose conversion efficiency, when compared to the AAD6 T . The genome-based metabolic systems engineering approach presented in this study might be considered an efficient framework to redirect microbial metabolism for the overproduction of chemicals of interest, and the novel strain BMA14 might be considered a potential microbial cell factory for further studies aimed to design levan production processes with lower production costs.

Design and implementation of a factorial randomized controlled trial of methadone maintenance therapy and an evidence-based behavioral intervention for incarcerated people living with HIV and opioid dependence in Malaysia.

PubMed

Bazazi, Alexander R; Wickersham, Jeffrey A; Wegman, Martin P; Culbert, Gabriel J; Pillai, Veena; Shrestha, Roman; Al-Darraji, Haider; Copenhaver, Michael M; Kamarulzaman, Adeeba; Altice, Frederick L

2017-08-01

Incarcerated people living with HIV and opioid dependence face enormous challenges to accessing evidence-based treatment during incarceration and after release into the community, placing them at risk of poor HIV treatment outcomes, relapse to opioid use and accompanying HIV transmission risk behaviors. Here we describe in detail the design and implementation of Project Harapan, a prospective clinical trial conducted among people living with HIV and opioid dependence who transitioned from prison to the community in Malaysia from 2010 to 2014. This trial involved 2 interventions: within-prison initiation of methadone maintenance therapy and an evidence-based behavioral intervention adapted to the Malaysian context (the Holistic Health Recovery Program for Malaysia, HHRP-M). Individuals were recruited and received the interventions while incarcerated and were followed for 12months after release to assess post-release HIV transmission risk behaviors and a range of other health-related outcomes. Project Harapan was designed as a fully randomized 2×2 factorial trial where individuals would be allocated in equal proportions to methadone maintenance therapy and HHRP-M, methadone maintenance therapy alone, HHRP-M alone, or control. Partway through study implementation, allocation to methadone maintenance therapy was changed from randomization to participant choice; randomization to HHRP-M continued throughout. We describe the justification for this study; the development and implementation of these interventions; changes to the protocol; and screening, enrollment, treatment receipt, and retention of study participants. Logistical, ethical, and analytic issues associated with the implementation of this study are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

COMPUTATIONAL MODELING OF CATHODIC LIMITATIONS ON LOCALIZED CORROSION OF WETTED SS 316L, AT ROOM TEMPERATURE

DOE Office of Scientific and Technical Information (OSTI.GOV)

F. Cui; F.J. Presuel-Moreno; R.G. Kelly

2005-10-13

The ability of a SS316L surface wetted with a thin electrolyte layer to serve as an effective cathode for an active localized corrosion site was studied computationally. The dependence of the total net cathodic current, I{sub net}, supplied at the repassivation potential E{sub rp} (of the anodic crevice) on relevant physical parameters including water layer thickness (WL), chloride concentration ([Cl{sup -}]) and length of cathode (Lc) were investigated using a three-level, full factorial design. The effects of kinetic parameters including the exchange current density (i{sub o,c}) and Tafel slope ({beta}{sub c}) of oxygen reduction, the anodic passive current density (i{submore » p}) (on the cathodic surface), and E{sub rp} were studied as well using three-level full factorial designs of [Cl{sup -}] and Lc with a fixed WL of 25 {micro}m. The study found that all the three parameters WL, [Cl{sup -}] and Lc as well as the interactions of Lc x WL and Lc x [Cl{sup -}] had significant impact on I{sub net}. A five-factor regression equation was obtained which fits the computation results reasonably well, but demonstrated that interactions are more complicated than can be explained with a simple linear model. Significant effects on I{sub net} were found upon varying either i{sub o,c}, {beta}{sub c}, or E{sub rp}, whereas i{sub p} in the studied range was found to have little impact. It was observed that I{sub net} asymptotically approached maximum values (I{sub max}) when Lc increased to critical minimum values. I{sub max} can be used to determine the stability of coupled localized corrosion and the critical Lc provides important information for experimental design and corrosion protection.« less

A community-initiated study of blood lead levels of Nicaraguan children living near a battery factory.

PubMed Central

Morales Bonilla, C; Mauss, E A

1998-01-01

OBJECTIVES: In response to requests by parents in Managua, Nicaragua, whose neighborhood borders a battery factory, 97 children were tested for blood lead, as were 30 children in a neighborhood without an obvious source of environmental lead. METHODS: Venous blood was examined by atomic absorption spectrophotometry. Educational workshops were conducted. RESULTS: Mean blood lead levels were 17.21 +/- 9.92 micrograms/dL in the index children and 7.40 +/- 5.37 micrograms/dL in the controls (P < .001). CONCLUSIONS: Children living near the battery factory are at increased risk of lead poisoning. The parents were able to petition the government to control the factory emissions and to improve appropriate health services. The factory is now closed. PMID:9842385

Design and analysis of mixed cropping experiments for indigenous Pacific Islands

Treesearch

Mareko P. Tofinga

1993-01-01

Mixed cropping (including agroforestry) often gives yield advan-tages as opposed to monocropping. Many criteria have been used to assess yield advantage in crop mixtures. Some of these are presented. In addition, the relative merits of replacement, additive and bivariate factorial designs are discussed. The concepts of analysis of mixed cropping are applied to an...

The Respective Advantages and Disadvantages of Different Ways of Measuring the Instructional Sensitivity of Reading Comprehension Test Items.

ERIC Educational Resources Information Center

Perkins, Kyle

In this paper four classes of procedures for measuring the instructional sensitivity of reading comprehension test items are reviewed. True experimental designs are not recommended because some of the most important reading comprehension variables do not lend themselves to experimental manipulation. "Ex post facto" factorial designs are…

Impact of a private sector living wage intervention on depressive symptoms among apparel workers in the Dominican Republic: a quasi-experimental study.

PubMed

Burmaster, Katharine B; Landefeld, John C; Rehkopf, David H; Lahiff, Maureen; Sokal-Gutierrez, Karen; Adler-Milstein, Sarah; Fernald, Lia C H

2015-08-03

Poverty reduction interventions through cash transfers and microcredit have had mixed effects on mental health. In this quasi-experimental study, we evaluate the effect of a living wage intervention on depressive symptoms of apparel factory workers in the Dominican Republic. Two apparel factories in the Dominican Republic. The final sample consisted of 204 hourly wage workers from the intervention (99) and comparison (105) factories. In 2010, an apparel factory began a living wage intervention including a 350% wage increase and significant workplace improvements. The wage increase was plausibly exogenous because workers were not aware of the living wage when applying for jobs and expected to be paid the usual minimum wage. These individuals were compared with workers at a similar local factory paying minimum wage, 15-16 months postintervention. Workers' depressive symptoms were assessed using the Center for Epidemiologic Studies-Depression Scale (CES-D). Ordinary least squares and Poisson regressions were used to evaluate treatment effect of the intervention, adjusted for covariates. Intervention factory workers had fewer depressive symptoms than comparison factory workers (unadjusted mean CES-D scores: 10.6 ± 9.3 vs 14.7 ± 11.6, p = 0.007). These results were sustained when controlling for covariates (β = -5.4, 95% CI -8.5 to -2.3, p = 0.001). In adjusted analyses using the standard CES-D clinical cut-off of 16, workers at the intervention factory had a 47% reduced risk of clinically significant levels of depressive symptoms compared with workers at the comparison factory (23% vs 40%). Policymakers have long grappled with how best to improve mental health among populations in low-income and middle-income countries. We find that providing a living wage and workplace improvements to improve income and well-being in a disadvantaged population is associated with reduced depressive symptoms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Modular transportable superconducting magnetic Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lieurance, D.; Kimball, F.; Rix, C.

1994-12-31

Design and cost studies were performed for the magnet components of mid-size (1-5 MWh), cold supported SMES systems using alternative configurations. The configurations studied included solenoid magnets, which required onsite assembly of the magnet system, and toroid and racetrack configurations which consisted of factory assembled modules. For each configuration, design concepts and cost information were developed for the major features of the magnet system including the conductor, electrical insulation, and structure. These studies showed that for mid-size systems, the costs of solenoid and toroid magnet configurations are comparable and that the specific configuration to be used for a given applicationmore » should be based upon customer requirements such as limiting stray fields or minimizing risks in development or construction.« less

The Influence of Education and Experience Upon Contextual and Task Performance in Warehouse Operations

DTIC Science & Technology

2016-09-01

leadership. Subjects were randomly assigned to one of four groups to conduct a mixed- design experiment; the design included a 2 x 2 factorial component...The experimental design should have resulted in baseline groups that were representative of the target population; therefore, one would expect...1983; Sheridan, 2015). “SRK provides a language in which to talk about types of behavior as a basis for system design . It provides a basis on which

An ergonomics intervention program to prevent worker injuries in a metal autoparts factory.

PubMed

Poosanthanasarn, Nitaya; Lohachit, Chantima; Fungladda, Wijitr; Sriboorapa, Sooth; Pulkate, Chompusakdi

2005-03-01

An ergonomics intervention program (EIP) was conducted with male employees working in the pressing and storage sections of a metal autoparts factory in Samut Prakan Province, Thailand. The objectives of this study were to assess the causes of injuries in the pressing and storage sections of that factory, and to improve working conditions by reducing worker injuries from accidents and low back muscular discomfort, using an EIR The study design used a participatory research approach which was quasi-experimental with pretest-posttest evaluations, with a non-equivalent control group. A total of 172 male participants working in Building A were the target group for assessing causes of injury. A retrospective study of official accident information, and questionnaires for general information, health and muscular discomfort, injury frequency rate (IFR), injury severity rate (ISR), medical expenses, and EIP design. Two groups of employees volunteered for the study on muscular back discomfort. The first group of 35 persons volunteered to participate in the EIP (EIP group), and the second 17 persons from Building B did not (non-EIP group). The EIP was composed of 4 major categories: (1) engineering improvement, (2) change in personal protective equipment, (3) environmental improvement, (4) administrative intervention, training, and health education. Low back muscular discomfort was measured through questionnaires on subjective feelings of muscular discomfort, and by surface electromyography (sEMG). Muscle activities were measured by sEMG of the left and right erector spinae and multifidus muscles, and evaluated by multivariate test for dependent samples (paired observation), and multivariate test for two independent samples. After EIP, IFR decreased 65.46%, ISR decreased 41.02%, and medical expenses decreased 42.79%. The low back muscular loads of the EIP group were significantly reduced, with a 95% confidence level (p < 0.05) while those of the non-EIP group were not. Subjective feelings of muscular discomfort, determined by Wilcoxon Signed Ranks test, showed that after applying the EIP to the EIP group, the mean scores for general bodily discomfort and low back muscular discomfort in the EIP group had significantly reduced, while those of the non-EIP group increased, (p < 0.05).

A Slice of Orion

NASA Image and Video Library

2006-08-15

This image composite shows a part of the Orion constellation surveyed by NASA Spitzer Space Telescope. The shape of the main image was designed by astronomers to roughly follow the shape of Orion cloud A, an enormous star-making factory.

Implementing multifactorial psychotherapy research in online virtual environments (IMPROVE-2): study protocol for a phase III trial of the MOST randomized component selection method for internet cognitive-behavioural therapy for depression.

PubMed

Watkins, Edward; Newbold, Alexandra; Tester-Jones, Michelle; Javaid, Mahmood; Cadman, Jennifer; Collins, Linda M; Graham, John; Mostazir, Mohammod

2016-10-06

Depression is a global health challenge. Although there are effective psychological and pharmaceutical interventions, our best treatments achieve remission rates less than 1/3 and limited sustained recovery. Underpinning this efficacy gap is limited understanding of how complex psychological interventions for depression work. Recent reviews have argued that the active ingredients of therapy need to be identified so that therapy can be made briefer, more potent, and to improve scalability. This in turn requires the use of rigorous study designs that test the presence or absence of individual therapeutic elements, rather than standard comparative randomised controlled trials. One such approach is the Multiphase Optimization Strategy, which uses efficient experimentation such as factorial designs to identify active factors in complex interventions. This approach has been successfully applied to behavioural health but not yet to mental health interventions. A Phase III randomised, single-blind balanced fractional factorial trial, based in England and conducted on the internet, randomized at the level of the patient, will investigate the active ingredients of internet cognitive-behavioural therapy (CBT) for depression. Adults with depression (operationalized as PHQ-9 score ≥ 10), recruited directly from the internet and from an UK National Health Service Improving Access to Psychological Therapies service, will be randomized across seven experimental factors, each reflecting the presence versus absence of specific treatment components (activity scheduling, functional analysis, thought challenging, relaxation, concreteness training, absorption, self-compassion training) using a 32-condition balanced fractional factorial design (2 IV 7-2 ). The primary outcome is symptoms of depression (PHQ-9) at 12 weeks. Secondary outcomes include symptoms of anxiety and process measures related to hypothesized mechanisms. Better understanding of the active ingredients of efficacious therapies, such as CBT, is necessary in order to improve and further disseminate these interventions. This study is the first application of a component selection experiment to psychological interventions in depression and will enable us to determine the main effect of each treatment component and its relative efficacy, and cast light on underlying mechanisms, so that we can systematically enhance internet CBT. Current Controlled Trials ISRCTN24117387 . Registered 26 August 2014.

Sensitivity analysis and nonlinearity assessment of steam cracking furnace process

NASA Astrophysics Data System (ADS)

Rosli, M. N.; Sudibyo, Aziz, N.

2017-11-01

In this paper, sensitivity analysis and nonlinearity assessment of cracking furnace process are presented. For the sensitivity analysis, the fractional factorial design method is employed as a method to analyze the effect of input parameters, which consist of four manipulated variables and two disturbance variables, to the output variables and to identify the interaction between each parameter. The result of the factorial design method is used as a screening method to reduce the number of parameters, and subsequently, reducing the complexity of the model. It shows that out of six input parameters, four parameters are significant. After the screening is completed, step test is performed on the significant input parameters to assess the degree of nonlinearity of the system. The result shows that the system is highly nonlinear with respect to changes in an air-to-fuel ratio (AFR) and feed composition.

The Role of Synthetic Biology in the Design of Microbial Cell Factories for Biofuel Production

PubMed Central

Colin, Verónica Leticia; Rodríguez, Analía; Cristóbal, Héctor Antonio

2011-01-01

Insecurity in the supply of fossil fuels, volatile fuel prices, and major concerns regarding climate change have sparked renewed interest in the production of fuels from renewable resources. Because of this, the use of biodiesel has grown dramatically during the last few years and is expected to increase even further in the future. Biodiesel production through the use of microbial systems has marked a turning point in the field of biofuels since it is emerging as an attractive alternative to conventional technology. Recent progress in synthetic biology has accelerated the ability to analyze, construct, and/or redesign microbial metabolic pathways with unprecedented precision, in order to permit biofuel production that is amenable to industrial applications. The review presented here focuses specifically on the role of synthetic biology in the design of microbial cell factories for efficient production of biodiesel. PMID:22028591

Effect of treated tannery effluent with domestic wastewater and amendments on growth and yield of cotton.

PubMed

Jagathjothi, N; Amanullah, M Mohamed; Muthukrishnan, P

2013-11-15

Pot culture and field experiments were carried out at the Common Effluent Treatment Plant (CETP), Dindigul during kharif 2011-12 to investigate the influence of irrigation of treated tannery effluent along with domestic wastewater on growth, yield attributes and yield of cotton. The pot culture was in a factorial completely randomized design and field experiment laid out in factorial randomized block design with four replications. The results revealed that the mixing proportion of 25% Treated Tannery Effluent (TTE)+75% domestic wastewater (DWW) application recorded taller plants, higher dry matter production, number of sympodial branches plant(-1), number of fruiting points plant(-1), number of bolls plant(-1) and seed cotton yield with yield reduction of 15.28 and 16.11% compared to normal water irrigation under pot culture and field experiment, respectively. Regarding amendments, gypsum application registered higher seed cotton yield followed by VAM.

Tracing the contamination origin of coliform bacteria in two small food-processing factories.

PubMed

Tominaga, Tatsuya; Sekine, Masahiro; Oyaizu, Hiroshi

2008-09-01

The objective of this study was to trace contamination sources of coliform bacteria by comparing the types of coliforms between food samples and the processing environments in two small food-processing factories (factories A and B). Fermentation tests of five sugars enabled the successful classification of 16 representative type strains into eight distinct groups. The grouping procedure was then applied to comparison of the coliform flora between food products and various locations in their processing environments. The consistency between each food and the tested locations was evaluated using the Jaccard index. The air conditioner and refrigeration room floor in factory A showed an index of 1.00, while the shaping machine in factory B showed an index of 0.98, indicating that these locations could be contamination sources. The validity of our results was confirmed by randomly amplified polymorphic DNA, which showed 100% matched profiles between the air conditioner and the food in factory A, and highly matched profiles between the machine and the food in factory B. This method for comparing the coliform flora between food and environments has the potential to be a reliable tracing tool for various food industries.

SWITCH: a dynamic CRISPR tool for genome engineering and metabolic pathway control for cell factory construction in Saccharomyces cerevisiae.

PubMed

Vanegas, Katherina García; Lehka, Beata Joanna; Mortensen, Uffe Hasbro

2017-02-08

The yeast Saccharomyces cerevisiae is increasingly used as a cell factory. However, cell factory construction time is a major obstacle towards using yeast for bio-production. Hence, tools to speed up cell factory construction are desirable. In this study, we have developed a new Cas9/dCas9 based system, SWITCH, which allows Saccharomyces cerevisiae strains to iteratively alternate between a genetic engineering state and a pathway control state. Since Cas9 induced recombination events are crucial for SWITCH efficiency, we first developed a technique TAPE, which we have successfully used to address protospacer efficiency. As proof of concept of the use of SWITCH in cell factory construction, we have exploited the genetic engineering state of a SWITCH strain to insert the five genes necessary for naringenin production. Next, the naringenin cell factory was switched to the pathway control state where production was optimized by downregulating an essential gene TSC13, hence, reducing formation of a byproduct. We have successfully integrated two CRISPR tools, one for genetic engineering and one for pathway control, into one system and successfully used it for cell factory construction.

Medical consequences of a factory closure: illness and disability in a four-year follow-up study.

PubMed

Westin, S; Norum, D; Schlesselman, J J

1988-03-01

The effect of a factory shut-down on sick leave and disability pensions was investigated in a four-year controlled follow-up study in a general practice setting. The study population consisted of 85 people, 72 women and 13 men, who lost their jobs when a sardine factory near Bergen in Norway was shut down in 1975. The employees of a nearby sister factory' within the same company were chosen as a control population, consisting of 87 people, 66 women and 21 men. The average amount of sick leave for the study group within the first year of follow-up showed a twofold increase compared to the controls. The rate of disability pensions, estimated by the life table method with appropriate adjustments, was more than three times higher in the study group than in the control group from the second through the fourth year of follow-up. The results of this investigation provide further evidence in support of a causal relationship between job loss and illness.

Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas

PubMed Central

Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

2015-01-01

Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area. PMID:26580644

Accelerator structure and beam transport system for the KEK photon factory injector

NASA Astrophysics Data System (ADS)

Sato, Isamu

1980-11-01

The injector is a 2.5 GeV electron linac which serves multiple purposes, being not only the injector for the various storage rings of the Photon Factory but also for the next planned project, the TRISTAN RING, and also as an intense electron or γ-ray source for research on phenomena in widely diverse scientific fields. The accelerator structure and beam transport system for the linac were designed with the greatest care in order to avoid beam blow-up difficulties, and also to be as suitable as possible to enable the economical mass production of the accelerator guides and focusing magnets.

Rapid prototyping of microbial cell factories via genome-scale engineering.

PubMed

Si, Tong; Xiao, Han; Zhao, Huimin

2015-11-15

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. Copyright © 2014 Elsevier Inc. All rights reserved.

Compact scanning transmission x-ray microscope at the photon factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeichi, Yasuo, E-mail: yasuo.takeichi@kek.jp; Inami, Nobuhito; Ono, Kanta

We report the design and performance of a compact scanning transmission X-ray microscope developed at the Photon Factory. Piezo-driven linear stages are used as coarse stages of the microscope to realize excellent compactness, mobility, and vibrational and thermal stability. An X-ray beam with an intensity of ∼10{sup 7} photons/s was focused to a diameter of ∼40 nm at the sample. At the soft X-ray undulator beamline used with the microscope, a wide range of photon energies (250–1600 eV) is available. The microscope has been used to research energy materials and in environmental sciences.

Methodology on Investigating the Influences of Automated Material Handling System in Automotive Assembly Process

NASA Astrophysics Data System (ADS)

Saffar, Seha; Azni Jafar, Fairul; Jamaludin, Zamberi

2016-02-01

A case study was selected as a method to collect data in actual industry situation. The study aimed to assess the influences of automated material handling system in automotive industry by proposing a new design of integration system through simulation, and analyze the significant effect and influence of the system. The method approach tool will be CAD Software (Delmia & Quest). The process of preliminary data gathering in phase 1 will collect all data related from actual industry situation. It is expected to produce a guideline and limitation in designing a new integration system later. In phase 2, an idea or concept of design will be done by using 10 principles of design consideration for manufacturing. A full factorial design will be used as design of experiment in order to analyze the performance measured of the integration system with the current system in case study. From the result of the experiment, an ANOVA analysis will be done to study the performance measured. Thus, it is expected that influences can be seen from the improvement made in the system.

It Cuts Both Ways: Workers, Management and the Construction of a "Community of Fate" on the Shop Floor in a Mexican Garment Factory

ERIC Educational Resources Information Center

Videla, Nancy Plankey

2006-01-01

Most studies of lean production are based on surveys of managers. This article examines the labor process under lean production at a high-end garment factory in Central Mexico through ethnographic research, consisting of nine months of work at the factory, and in-depth interviews with 25 managers and 26 workers. The author found that…

A canopy trimming experiment in Puerto Rico: The response of litter decomposition and nutrient release to canopy opening and debris deposition in a subtropical wet forest

Treesearch

G. Gonzalez; D.J. Lodge; B.A. Richardson; M.J. Richardson

2014-01-01

In this study, we used a replicated factorial design to separate the individual and interacting effects of two main components of a severe hurricane – canopy opening and green debris deposition on leaf litter decay in the tabonuco forest in the Luquillo Mountains of Puerto Rico. We quantify changes in percent mass remaining (PMR), the concentration and absolute amounts...

Evaluating treatment of obstructive sleep apnea comorbid with insomnia disorder using an incomplete factorial design

PubMed Central

Crawford, Megan R.; Turner, Arlener D.; Wyatt, James K.; Fogg, Louis F.; Ong, Jason C.

2016-01-01

Chronic insomnia disorder is a prevalent condition and a significant proportion of these individuals also have obstructive sleep apnea (OSA). These two sleep disorders have distinct pathophysiology and are managed with different treatment approaches. High comorbidity rates have been a catalyst for emerging studies examining multidisciplinary treatment for OSA comorbid with insomnia disorder. In this article, we describe a randomized clinical trial of Cognitive Behavioral Treatment for insomnia (CBT-I) and Positive Airway Pressure (PAP) for OSA. Participants are randomized to receive one of three treatment combinations. Individuals randomized to treatment Arm A receive sequential treatment beginning with CBT-I followed by PAP, in treatment Arm B CBT-I and PAP are administered concurrently. These treatment arms are compared to a control condition, treatment Arm C, where individuals receive PAP alone. Adopting an incomplete factorial study design will allow us to evaluate the efficacy of multidisciplinary treatment (Arms A & B) versus standard treatment alone (Arm C). In addition, the random allocation of individuals to the two different combined treatment sequences (Arm A and Arm B) will allow us to understand the benefits of the sequential administration of CBT-I and PAP relative to concurrent treatment of PAP and CBT-I. These findings will provide evidence of the clinical benefits of treating insomnia disorder in the context of OSA. PMID:26733360

Properties of bioadhesive ketoprofen liquid suppositories: preparation, determination of gelation temperature, viscosity studies and evaluation of mechanical properties using texture analyzer by 4 × 4 factorial design.

PubMed

Ozgüney, Işık; Kardhiqi, Anita

2014-12-01

Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation temperature, viscosity and mechanical properties. Bioadhesive liquid suppositories were prepared by the cold method using poloxamer 407 (P 407), Poloxamer 188 (P 188) and various amounts of different bioadhesive polymers. Their gelation temperatures, viscosity values and mechanical properties were determined using texture analyzer by 4 × 4 factorial design. It was seen that in presence of KP, gelation temperature of formulation P 407/P 188 (4/20%) significantly decreased from 64 to 37.1 °C. It is to be noted that addition of increasing concentrations of bioadhesive polymers lowered gelation temperature and its decrease was highest with addition of Carbopol 934 P (C). Results of texture profile analysis (TPA) showed that formulations containing C have significantly higher hardness and adhesiveness values than other bioadhesive formulations. According to TPA, gel structure of liquid suppository formulation F5, containing P 407/P 188/KP/C (4/20/2.5/0.8%), exhibited the greatest hardness, compressibilty, adhesiveness and besides greatest viscosity. According to mechanical properties and viscosity values, it was concluded that F5 could be a promising formulation.

Enhancement of the bioavailability of an antihypertensive drug by transdermal protransfersomal system: formulation and in vivo study.

PubMed

Morsi, Nadia M; Aboelwafa, Ahmed A; Dawoud, Marwa H S

2018-06-01

Timolol Maleate (TiM), a nonselective β-adrenergic blocker, is a potent highly effective agent for management of hypertension. The drug suffers from poor oral bioavailability (50%) due to its first pass effect and a short elimination half-life of 4 h; resulting in its frequent administration. Transdermal formulation may circumvent these problems in the form of protransfersomes. The aim of this study is to develop and optimize transdermal protransfersomal system of Timolol Maleate by film deposition on carrier method where protransfersomes were converted to transfersomes upon skin hydration following transdermal application under occlusive conditions. Two 2 3 full factorial designs were employed to investigate the influence of three formulation variables which were; phosphatidyl choline: surfactant molar ratio, carrier: mixture and the type of SAA each on particle size, drug entrapment efficiency and release rate. The optimized formulation was evaluated regarding permeation through hairless rat skin and compared with oral administration of aqueous solution on male Wistar rats. Optimized protransfersomal system had excellent permeation rate through shaved rat skin (780.69 μg/cm 2 /h) and showed six times increase in relative bioavailability with prolonged plasma profile up to 72 h. A potential protransfresomal transdermal system was successfully developed and factorial design was found to be a smart tool in its optimization.

Dust exposure and chronic respiratory symptoms among coffee curing workers in Kilimanjaro: a cross sectional study.

PubMed

Sakwari, Gloria; Bråtveit, Magne; Mamuya, Simon H D; Moen, Bente E

2011-11-24

Coffee processing causes organic dust exposure which may lead to development of respiratory symptoms. Previous studies have mainly focused on workers involved in roasting coffee in importing countries. This study was carried out to determine total dust exposure and respiratory health of workers in Tanzanian primary coffee-processing factories. A cross sectional study was conducted among 79 workers in two coffee factories, and among 73 control workers in a beverage factory. Personal samples of total dust (n = 45 from the coffee factories and n = 19 from the control factory) were collected throughout the working shift from the breathing zone of the workers. A questionnaire with modified questions from the American Thoracic Society questionnaire was used to assess chronic respiratory symptoms. Differences between groups were tested by using independent t-tests and Chi square tests. Poisson Regression Model was used to estimate prevalence ratio, adjusting for age, smoking, presence of previous lung diseases and years worked in dusty factories. All participants were male. The coffee workers had a mean age of 40 years and were older than the controls (31 years). Personal total dust exposure in the coffee factories were significantly higher than in the control factory (geometric mean (GM) 1.23 mg/m3, geometric standard deviation (GSD) (0.8) vs. 0.21(2.4) mg/m3). Coffee workers had significantly higher prevalence than controls for cough with sputum (23% vs. 10%; Prevalence ratio (PR); 2.5, 95% CI 1.0-5.9) and chest tightness (27% vs. 13%; PR; 2.4, 95% CI 1.1-5.2). The prevalence of morning cough, cough with and without sputum for 4 days or more in a week was also higher among coffee workers than among controls. However, these differences were not statistically significant. Workers exposed to coffee dust reported more respiratory symptoms than did the controls. This might relate to their exposure to coffee dust. Interventions for reduction of dust levels and provision of respiratory protective equipment are recommended.

Dust exposure and chronic respiratory symptoms among coffee curing workers in Kilimanjaro: a cross sectional study

PubMed Central

2011-01-01

Background Coffee processing causes organic dust exposure which may lead to development of respiratory symptoms. Previous studies have mainly focused on workers involved in roasting coffee in importing countries. This study was carried out to determine total dust exposure and respiratory health of workers in Tanzanian primary coffee-processing factories. Methods A cross sectional study was conducted among 79 workers in two coffee factories, and among 73 control workers in a beverage factory. Personal samples of total dust (n = 45 from the coffee factories and n = 19 from the control factory) were collected throughout the working shift from the breathing zone of the workers. A questionnaire with modified questions from the American Thoracic Society questionnaire was used to assess chronic respiratory symptoms. Differences between groups were tested by using independent t-tests and Chi square tests. Poisson Regression Model was used to estimate prevalence ratio, adjusting for age, smoking, presence of previous lung diseases and years worked in dusty factories. Results All participants were male. The coffee workers had a mean age of 40 years and were older than the controls (31 years). Personal total dust exposure in the coffee factories were significantly higher than in the control factory (geometric mean (GM) 1.23 mg/m3, geometric standard deviation (GSD) (0.8) vs. 0.21(2.4) mg/m3). Coffee workers had significantly higher prevalence than controls for cough with sputum (23% vs. 10%; Prevalence ratio (PR); 2.5, 95% CI 1.0 - 5.9) and chest tightness (27% vs. 13%; PR; 2.4, 95% CI 1.1 - 5.2). The prevalence of morning cough, cough with and without sputum for 4 days or more in a week was also higher among coffee workers than among controls. However, these differences were not statistically significant. Conclusion Workers exposed to coffee dust reported more respiratory symptoms than did the controls. This might relate to their exposure to coffee dust. Interventions for reduction of dust levels and provision of respiratory protective equipment are recommended. PMID:22114929

Applications of High Intensity Proton Accelerators

NASA Astrophysics Data System (ADS)

Raja, Rajendran; Mishra, Shekhar

2010-06-01

Superconducting radiofrequency linac development at Fermilab / S. D. Holmes -- Rare muon decay experiments / Y. Kuno -- Rare kaon decays / D. Bryman -- Muon collider / R. B. Palmer -- Neutrino factories / S. Geer -- ADS and its potential / J.-P. Revol -- ADS history in the USA / R. L. Sheffield and E. J. Pitcher -- Accelerator driven transmutation of waste: high power accelerator for the European ADS demonstrator / J. L. Biarrotte and T. Junquera -- Myrrha, technology development for the realisation of ADS in EU: current status & prospects for realisation / R. Fernandez ... [et al.] -- High intensity proton beam production with cyclotrons / J. Grillenberger and M. Seidel -- FFAG for high intensity proton accelerator / Y. Mori -- Kaon yields for 2 to 8 GeV proton beams / K. K. Gudima, N. V. Mokhov and S. I. Striganov -- Pion yield studies for proton driver beams of 2-8 GeV kinetic energy for stopped muon and low-energy muon decay experiments / S. I. Striganov -- J-Parc accelerator status and future plans / H. Kobayashi -- Simulation and verification of DPA in materials / N. V. Mokhov, I. L. Rakhno and S. I. Striganov -- Performance and operational experience of the CNGS facility / E. Gschwendtner -- Particle physics enabled with super-conducting RF technology - summary of working group 1 / D. Jaffe and R. Tschirhart -- Proton beam requirements for a neutrino factory and muon collider / M. S. Zisman -- Proton bunching options / R. B. Palmer -- CW SRF H linac as a proton driver for muon colliders and neutrino factories / M. Popovic, C. M. Ankenbrandt and R. P. Johnson -- Rapid cycling synchrotron option for Project X / W. Chou -- Linac-based proton driver for a neutrino factory / R. Garoby ... [et al.] -- Pion production for neutrino factories and muon colliders / N. V. Mokhov ... [et al.] -- Proton bunch compression strategies / V. Lebedev -- Accelerator test facility for muon collider and neutrino factory R&D / V. Shiltsev -- The superconducting RF linac for muon collider and neutrino factory - summary of working group 2 / J. Galambos, R. Garoby and S. Geer -- Prospects for a very high power CW SRF linac / R. A. Rimmer -- Indian accelerator program for ADS applications / V. C. Sahni and P. Singh -- Ion accelerator activities at VECC (particularly, operating at low temperature) / R. K. Bhandari -- Chinese efforts in high intensity proton accelerators / S. Fu, J. Wang and S. Fang -- ADSR activity in the UK / R. J. Barlow -- ADS development in Japan / K. Kikuchi -- Project-X, SRF, and very large power stations / C. M. Ankenbrandt, R. P. Johnson and M. Popovic -- Power production and ADS / R. Raja -- Experimental neutron source facility based on accelerator driven system / Y. Gohar -- Transmutation mission / W. S. Yang -- Safety performance and issues / J. E. Cahalan -- Spallation target design for accelerator-driven systems / Y. Gohar -- Design considerations for accelerator transmutation of waste system / W. S. Yang -- Japan ADS program / T. Sasa -- Overview of members states' and IAEA activities in the field of Accelerator Driven Systems (ADS) / A. Stanculescu -- Linac for ADS applications - accelerator technologies / R. W. Garnett and R. L. Sheffield -- SRF linacs and accelerator driven sub-critical systems - summary working groups 3 & 4 / J. Delayen -- Production of Actinium-225 via high energy proton induced spallation of Thorium-232 / J. Harvey ... [et al.] -- Search for the electric dipole moment of Radium-225 / R. J. Holt, Z.-T. Lu and R. Mueller -- SRF linac and material science and medicine - summary of working group 5 / J. Nolen, E. Pitcher and H. Kirk.

Biological monitoring as proficient assessment method in chronic exposure to irritating gases and vapors.

PubMed

Szász, Zsuzsánna; Abrám, Z; Szász, L; Moldovan, H; Demeter, Annamária

2013-01-01

Air pollution and its adverse health effect represent a global issue. Long term or permanent exposure at low doses of toxic material may increase the number of new appeared severe respiratory diseases and may aggravate most of the existing chronic cases. In the present study, the main toxic aerosols released by the greatest chemical factory in Transylvania were analyzed and their health impacts were measured. We have used in our trial biologic monitoring 1786 employees from a chemical factory in a transversal descriptive study. In the same time, we have noticed environmental determination of air quality and also, we have checked the health status and other 90 cases from a nonchemical factory. In this factory there are also pneumotrop harms. Results of our study give useful information regarding workers health status, with possibility to make pollution-medical condition association: there was no significant association between occurrence of decreased lung function tests and exposure of chemical irritants compared to the second investigated factory. Exposure to pneumotrope hazards imposes safeguards to protect health and biological monitoring has proven absolutely necessary to do so. Last but not least, lifestyle monitoring is to be effective.

Application of Response Surface Methodology for Optimization of Extracellular Glucoamylase Production by Candida guilliermondii.

PubMed

Mohamed, Lagzouli; Kettani, Youssfi El; Ali, Aitounejjar; Mohamed, Elyachioui; Mohamed, Jadal

2017-01-01

Glucoamylase is among the most important enzymes in biotechnology. The present study aims to determine better conditions for growth and glucoamylase production by Candida guilliermondii and to reduce the overall cost of the medium using Box-Behnken design with one central point and response surface methodology. Box-Behnken factorial design based on three levels was carried out to obtain optimal medium combination of five independent variables such as initial pH, soluble starch, CH4N2O, yeast extract and MgSO4. Forty one randomized mediums were incubated in flask on a rotary shaker at 105 rpm for 72 h at 30°C. The production of biomass was found to be pH and starch dependent, maximum production when the starch concentration was 8 g L-1 and the initial pH was 6, while maximum glucoamylase production was found at 6.5 of initial pH, 4 g L-1 yeast extract and 6 g L-1 starch, whereas yeast extract and urea were highly significant, but interacted negatively. Box-Behnken factorial design used for the analysis of treatment combinations gave a second-order polynomial regression model with R2 = 0.976 for Biomass and R2 = 0.981 for glucoamylase. The final biomass and glucoamylase activity obtained was very close to the calculated parameters according to the p-values (p<0.001), the predicted optimal parameters were confirmed and provides a basis for further studies in baking additives and in the valuation of starch waste products.

ANTAGONISM OF CHLOROBENZENE-INDUCED HEPATOTOXICITY BY LINDANE

EPA Science Inventory

In a 2x2 factorial designed experiment involving chlorobenzene and gamma-hexachlorocyclohexane (lindane), the hepatotoxicity induced by a challenge dose of chlorobenzene was altered by the pretreatments due to selective changes in various metabolic pathways. These changes resulte...

Microfluidic screening and whole-genome sequencing identifies mutations associated with improved protein secretion by yeast.

PubMed

Huang, Mingtao; Bai, Yunpeng; Sjostrom, Staffan L; Hallström, Björn M; Liu, Zihe; Petranovic, Dina; Uhlén, Mathias; Joensson, Haakan N; Andersson-Svahn, Helene; Nielsen, Jens

2015-08-25

There is an increasing demand for biotech-based production of recombinant proteins for use as pharmaceuticals in the food and feed industry and in industrial applications. Yeast Saccharomyces cerevisiae is among preferred cell factories for recombinant protein production, and there is increasing interest in improving its protein secretion capacity. Due to the complexity of the secretory machinery in eukaryotic cells, it is difficult to apply rational engineering for construction of improved strains. Here we used high-throughput microfluidics for the screening of yeast libraries, generated by UV mutagenesis. Several screening and sorting rounds resulted in the selection of eight yeast clones with significantly improved secretion of recombinant α-amylase. Efficient secretion was genetically stable in the selected clones. We performed whole-genome sequencing of the eight clones and identified 330 mutations in total. Gene ontology analysis of mutated genes revealed many biological processes, including some that have not been identified before in the context of protein secretion. Mutated genes identified in this study can be potentially used for reverse metabolic engineering, with the objective to construct efficient cell factories for protein secretion. The combined use of microfluidics screening and whole-genome sequencing to map the mutations associated with the improved phenotype can easily be adapted for other products and cell types to identify novel engineering targets, and this approach could broadly facilitate design of novel cell factories.

[Investigation on acute nitrite poisoning in Yangjiang city, Guangdong province, China].

PubMed

Yu, Hongjie; Luo, Huiming; Lu, Xirong; Song, Qubo; Fan, Zifan

2002-12-01

To determine the cause of acute poisoning occurred in a factory in Yangjiang city, Guangdong province. In a cross-sectional study, interviews were conducted with the administrators of the factory and the local physician. A review was conducted on the water system used for industrial purposes and a separate system used by workers for drinking water. Treatment and discharge of industrial waste water were examined. Face-to-face interview was conducted to identify risk of exposure for illness among workers. A total number of 36 cases were identified in the plant and the attack rate was 16.4% (36/220). The incubation period (time between drinking polluted water and the onset of symptoms) had a median of 90 minutes (range: 30 - 230 minutes). Consuming water at the factory increased the attack rate and a dose-response effect was identified (chi(2)(trend) = 79.115, P < 0.01). The nitrite content of residuals in drinking water exceeded the WHO standard (1 ppm). The accident of acute poisoning was due to drinking water contaminated with sodium nitrite. The prevention of drinking water contaminated by toxic chemicals like sodium nitrite, and the design of industrial and potable water supply system need to be carefully reviewed. Regulations should be developed and enforced to minimize the impact of industrial waste water discharges to guarantee the access to clean drinking water.

Investigation Of The Effects Of Reflow Profile Parameters On Lead-free Solder Bump Volumes And Joint Integrity

NASA Astrophysics Data System (ADS)

Amalu, E. H.; Lui, Y. T.; Ekere, N. N.; Bhatti, R. S.; Takyi, G.

2011-01-01

The electronics manufacturing industry was quick to adopt and use the Surface Mount Technology (SMT) assembly technique on realization of its huge potentials in achieving smaller, lighter and low cost product implementations. Increasing global customer demand for miniaturized electronic products is a key driver in the design, development and wide application of high-density area array package format. Electronic components and their associated solder joints have reduced in size as the miniaturization trend in packaging continues to be challenged by printing through very small stencil apertures required for fine pitch flip-chip applications. At very narrow aperture sizes, solder paste rheology becomes crucial for consistent paste withdrawal. The deposition of consistent volume of solder from pad-to-pad is fundamental to minimizing surface mount assembly defects. This study investigates the relationship between volume of solder paste deposit (VSPD) and the volume of solder bump formed (VSBF) after reflow, and the effect of reflow profile parameters on lead-free solder bump formation and the associated solder joint integrity. The study uses a fractional factorial design (FFD) of 24-1 Ramp-Soak-Spike reflow profile, with all main effects and two-way interactions estimable to determine the optimal factorial combination. The results from the study show that the percentage change in the VSPD depends on the combination of the process parameters and reliability issues could become critical as the size of solder joints soldered on the same board assembly vary greatly. Mathematical models describe the relationships among VSPD, VSBF and theoretical volume of solder paste. Some factors have main effects across the volumes and a number of interactions exist among them. These results would be useful for R&D personnel in designing and implementing newer applications with finer-pitch interconnect.

Quantitative attribution of major driving forces on soil organic carbon dynamics

USGS Publications Warehouse

Wu, Yiping; Liu, Shuguang; Tan, Zhengxi

2015-01-01

Soil organic carbon (SOC) storage plays a major role in the global carbon cycle and is affected by many factors including land use/management changes (e.g., biofuel production-oriented changes). However, the contributions of various factors to SOC changes are not well understood and quantified. This study was designed to investigate the impacts of changing farming practices, initial SOC levels, and biological enhancement of grain production on SOC dynamics and to attribute the relative contributions of major driving forces (CO2 enrichment and farming practices) using a fractional factorial modeling design. The case study at a crop site in Iowa in the United States demonstrated that the traditional corn-soybean (CS) rotation could still accumulate SOC over this century (from 4.2 to 6.8 kg C/m2) under the current condition; whereas the continuous-corn (CC) system might have a higher SOC sequestration potential than CS. In either case, however, residue removal could reduce the sink potential substantially. Long-term simulation results also suggested that the equilibrium SOC level may vary greatly (∼5.7 to ∼11 kg C/m2) depending on cropping systems and management practices, and projected growth enhancement could make the magnitudes higher (∼7.8 to ∼13 kg C/m2). Importantly, the factorial design analysis indicated that residue management had the most significant impact (contributing 49.4%) on SOC changes, followed by CO2 Enrichment (37%), Tillage (6.2%), the combination of CO2Enrichment-Residue removal (5.8%), and Fertilization (1.6%). In brief, this study is valuable for understanding the major forces driving SOC dynamics of agroecosystems and informative for decision-makers when seeking the enhancement of SOC sequestration potential and sustainability of biofuel production, especially in the Corn Belt region of the United States.

Hypothesis testing in clinical trials.

PubMed

Green, S B

2000-08-01

In designing and analyzing any clinical trial, two issues related to patient heterogeneity must be considered: (1) the effect of chance and (2) the effect of bias. These issues are addressed by enrolling adequate numbers of patients in the study and using randomization for treatment assignment. An "intention-to-treat" analysis of outcome data includes all individuals randomized and counted in the group to which they are randomized. There is an increased risk of spurious results with a greater number of subgroup analyses, particularly when these analyses are data derived. Factorial designs are sometimes appropriate and can lead to efficiencies by addressing more than one comparison of interventions in a single trial.

Fourth Grade Factory--An Integrated, Collaborative Unit in Manufacturing and Economics--Make It, Take It.

ERIC Educational Resources Information Center

Bliss, Clifford; Giles, Bob

This unit for fourth grade and high school includes elements of careers, economics and free enterprise for fourth graders and elements of problem solving and design, manufacturing, drafting, and woodworking for high school students. The unit is taught in both the fourth grade and the high school classrooms. The unit involves planning, designing,…