Efficiency in Complexity: Composition and Dynamic Nature of Mimivirus Replication Factories

PubMed Central

Milrot, Elad; Mutsafi, Yael; Ben-Dor, Shifra; Levin, Yishai; Savidor, Alon; Kartvelishvily, Elena

2016-01-01

ABSTRACT The recent discovery of multiple giant double-stranded DNA (dsDNA) viruses blurred the consensual distinction between viruses and cells due to their size, as well as to their structural and genetic complexity. A dramatic feature revealed by these viruses as well as by many positive-strand RNA viruses is their ability to rapidly form elaborate intracellular organelles, termed “viral factories,” where viral progeny are continuously generated. Here we report the first isolation of viral factories at progressive postinfection time points. The isolated factories were subjected to mass spectrometry-based proteomics, bioinformatics, and imaging analyses. These analyses revealed that numerous viral proteins are present in the factories but not in mature virions, thus implying that multiple and diverse proteins are required to promote the efficiency of viral factories as “production lines” of viral progeny. Moreover, our results highlight the dynamic and highly complex nature of viral factories, provide new and general insights into viral infection, and substantiate the intriguing notion that viral factories may represent the living state of viruses. IMPORTANCE Large dsDNA viruses such as vaccinia virus and the giant mimivirus, as well as many positive-strand RNA viruses, generate elaborate cytoplasmic organelles in which the multiple and diverse transactions required for viral replication and assembly occur. These organelles, which were termed “viral factories,” are attracting much interest due to the increasing realization that the rapid and continuous production of viral progeny is a direct outcome of the elaborate structure and composition of the factories, which act as efficient production lines. To get new insights into the nature and function of viral factories, we devised a method that allows, for the first time, the isolation of these organelles. Analyses of the isolated factories generated at different times postinfection by mass spectrometry-based proteomics provide new perceptions of their role and reveal the highly dynamic nature of these organelles. PMID:27581975

76 FR 77175 - New York Fun Factory Fireworks Display, Western Long Island Sound; Mamaroneck, NY

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-12

...-AA00 New York Fun Factory Fireworks Display, Western Long Island Sound; Mamaroneck, NY AGENCY: Coast... in support of the New York Fun Factory Fireworks display. This action is necessary to provide for the... the Coast Guard to define regulatory safety zones. On May 10, 2012 New York Fun Factory Events is...

Factorial Structure of the New Ecological Paradigm Scale in Two French Samples

ERIC Educational Resources Information Center

Fleury-Bahi, Ghozlane; Marcouyeux, Aurore; Renard, Elise; Roussiau, Nicolas

2015-01-01

The principal objective of this research is to test the factorial structure of the New Ecological Paradigm scale on a population of men and women residing in France. The tested model is a second-order factorial model. This factorial structure is evaluated on two separate samples to test the stability of the solution (a first sample of 253…

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation.

PubMed

Lindholm, Henrik; Egels-Zandén, Niklas; Rudén, Christina

2016-10-01

In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. To examine how well suppliers' chemical health and safety performance complies with buyers' CSR policies and whether audited factories improve their performance. CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits.

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation

PubMed Central

2016-01-01

Background In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. Objectives To examine how well suppliers’ chemical health and safety performance complies with buyers’ CSR policies and whether audited factories improve their performance. Methods CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Results Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Conclusions Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits. PMID:27611103

Effect of factory effluents on physiological and biochemical contents of Gossypium hirsutum l.

PubMed

Muthusamy, A; Jayabalan, N

2001-10-01

The effect of sago and sugar factory effluents was studied on Gossypium hirsutum L. var. MCU 5 and MCU 11. Plants were irrigated with 0, 25, 50, 75 and 100% of effluents of both factories. At lower concentration (25%) of sugar factory effluents had stimulatory effect on all biochemical contents observed. Moreover, all concentration of sago factory effluents were found to have inhibitory effect on all biochemical contents except proline content which increased with increasing concentration of both the effluents. Plants growing on adjacent to sago and sugar factories or they irrigated with such type of polluted water, may accumulate the heavy metals found in both the effluents, at higher levels in plant products and if consumed may have similar effect on living organisms.

The International Design Study for the Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, K.

2008-02-21

The International Design Study for a future Neutrino Factory and super-beam facility (the ISS) established the physics case for a high-precision programme of long-baseline neutrino-oscillation measurements. The ISS also identified baseline specifications for the Neutrino Factory accelerator complex and the neutrino detector systems. This paper summarises the objectives of the International Design Study for the Neutrino Factory (the IDS-NF). The IDS-NF will build on the work of the ISS to deliver a Reference Design Report for the Neutrino Factory by 2012/13 and an Interim Design Report by 2010/11.

19 CFR Appendix to Part 102 - Textile and Apparel Manufacturer Identification

Code of Federal Regulations, 2011 CFR

2011-04-01

... factories in Macau start with the same words, “Fabrica de Artigos de Vestuario,” which means “Factory of Clothing.” For a factory named “Fabrica de Artigos de Vestuario JUMP HIGH Ltd,” the portion of the factory...; VE20TCEN5880CAR Fabrica de Artigos de Vestuario TOP JOB, Grand River Building, FI 2-4, Macau; MOTOPJOB24MAC THE...

19 CFR Appendix to Part 102 - Textile and Apparel Manufacturer Identification

Code of Federal Regulations, 2010 CFR

2010-04-01

... factories in Macau start with the same words, “Fabrica de Artigos de Vestuario,” which means “Factory of Clothing.” For a factory named “Fabrica de Artigos de Vestuario JUMP HIGH Ltd,” the portion of the factory...; VE20TCEN5880CAR Fabrica de Artigos de Vestuario TOP JOB, Grand River Building, FI 2-4, Macau; MOTOPJOB24MAC THE...

Bulgar Factories (Trading Posts) in the Kama River Area as a Factor of Adjustment to Feudalism

ERIC Educational Resources Information Center

Krylasova, Natalia B.; Belavin, Andrei M.; Podosenova, Yulia A.

2016-01-01

At the start of the 2nd ML AD a number of trading posts, or factories, emerged in the Cis-Ural region with participation of Bulgar handicraftsmen and merchants. They were townships populated by various ethnic groups. Several centuries later similar factories were set up by natives of the Cis-Ural region in Western Siberia. These factories have…

Analysis of replication factories in human cells by super-resolution light microscopy

PubMed Central

2009-01-01

Background DNA replication in human cells is performed in discrete sub-nuclear locations known as replication foci or factories. These factories form in the nucleus during S phase and are sites of DNA synthesis and high local concentrations of enzymes required for chromatin replication. Why these structures are required, and how they are organised internally has yet to be identified. It has been difficult to analyse the structure of these factories as they are small in size and thus below the resolution limit of the standard confocal microscope. We have used stimulated emission depletion (STED) microscopy, which improves on the resolving power of the confocal microscope, to probe the structure of these factories at sub-diffraction limit resolution. Results Using immunofluorescent imaging of PCNA (proliferating cell nuclear antigen) and RPA (replication protein A) we show that factories are smaller in size (approximately 150 nm diameter), and greater in number (up to 1400 in an early S- phase nucleus), than is determined by confocal imaging. The replication inhibitor hydroxyurea caused an approximately 40% reduction in number and a 30% increase in diameter of replication factories, changes that were not clearly identified by standard confocal imaging. Conclusions These measurements for replication factory size now approach the dimensions suggested by electron microscopy. This agreement between these two methods, that use very different sample preparation and imaging conditions, suggests that we have arrived at a true measurement for the size of these structures. The number of individual factories present in a single nucleus that we measure using this system is greater than has been previously reported. This analysis therefore suggests that each replication factory contains fewer active replication forks than previously envisaged. PMID:20015367

Rapid prototyping 3D virtual world interfaces within a virtual factory environment

NASA Technical Reports Server (NTRS)

Kosta, Charles Paul; Krolak, Patrick D.

1993-01-01

On-going work into user requirements analysis using CLIPS (NASA/JSC) expert systems as an intelligent event simulator has led to research into three-dimensional (3D) interfaces. Previous work involved CLIPS and two-dimensional (2D) models. Integral to this work was the development of the University of Massachusetts Lowell parallel version of CLIPS, called PCLIPS. This allowed us to create both a Software Bus and a group problem-solving environment for expert systems development. By shifting the PCLIPS paradigm to use the VEOS messaging protocol we have merged VEOS (HlTL/Seattle) and CLIPS into a distributed virtual worlds prototyping environment (VCLIPS). VCLIPS uses the VEOS protocol layer to allow multiple experts to cooperate on a single problem. We have begun to look at the control of a virtual factory. In the virtual factory there are actors and objects as found in our Lincoln Logs Factory of the Future project. In this artificial reality architecture there are three VCLIPS entities in action. One entity is responsible for display and user events in the 3D virtual world. Another is responsible for either simulating the virtual factory or communicating with the real factory. The third is a user interface expert. The interface expert maps user input levels, within the current prototype, to control information for the factory. The interface to the virtual factory is based on a camera paradigm. The graphics subsystem generates camera views of the factory on standard X-Window displays. The camera allows for view control and object control. Control or the factory is accomplished by the user reaching into the camera views to perform object interactions. All communication between the separate CLIPS expert systems is done through VEOS.

Dental caries experience in high risk soft drinks factory workers of South India: a comparative study.

PubMed

Kumar, Sandeep; Acharya, Shashidhar; Vasthare, Ramprasad; Singh, Siddharth Kumar; Gupta, Anjali; Debnath, Nitai

2014-01-01

The consumption of soft-drinks has been associated with dental caries development. The aim was to evaluate dental caries experience amongst the workers working in soft-drink industries located in South India and compare it with other factory workers. To evaluate the validity of specific caries index (SCI), which is newer index for caries diagnosis. This was a cross-sectional study carried out among 420 workers (210 in soft-drinks factory and 210 in other factories), in the age group of 20-45 years of Udupi district, Karnataka, India. Index used for clinical examination was decayed, missing, filled surfaces (DMFS) index and SCI. The mean and standard deviation (SD) of decayed surface (5.8 ± 1.8), missing surface (4.3 ± 2) and filled surface (1.94 ± 1.95) and total DMFS score (12.11 ± 3.8) in soft-drinks factory workers were found to be significantly higher than the other factory workers. The total SCI score (mean and SD) was found to be significantly higher in soft-drinks factory workers (5.83 ± 1.80) compared with other factory workers (4.56 ± 1.45). There was a high correlation obtained between SCI score and DMFS score. The regression equation given by DMFS = 1.178 + 1.866 (SCI scores). The caries experience was higher in workers working in soft-drinks factory and this study also showed that specific caries index can be used as a valid index for assessing dental caries experience.

The Role of Spatial Analysis in Detecting the Consequence of the Factory Sites : Case Study of Assalaya Factory-Sudan

NASA Astrophysics Data System (ADS)

Khair, Amar Sharaf Eldin; Purwanto; RyaSunoko, Henna; Abdullah, Omer Adam

2018-02-01

Spatial analysis is considered as one of the most important science for identifying the most appropriate site for industrialization and also to alleviate the environmental ramifications caused by factories. This study aims at analyzing the Assalaya sugarcane factory site by the use of spatial analysis to determine whether it has ramification on the White Nile River. The methodology employed for this study is Global Position System (GPS) to identify the coordinate system of the study phenomena and other relative factors. The study will also make use Geographical Information System (GIS) to implement the spatial analysis. Satellite data (LandsatDem-Digital Elevation Model) will be considered for the study area and factory in identifying the consequences by analyzing the location of the factory through several features such as hydrological, contour line and geological analysis. Data analysis reveals that the factory site is inappropriate and according to observation on the ground it has consequences on the White Nile River. Based on the finding, the study recommended some suggestions to avoid the aftermath of any factory in general. We have to take advantage of this new technological method to aid in selecting most apt locations for industries that will create an ambient environment.

Factorial Experiments: Efficient Tools for Evaluation of Intervention Components

PubMed Central

Collins, Linda M.; Dziak, John J.; Kugler, Kari C.; Trail, Jessica B.

2014-01-01

Background An understanding of the individual and combined effects of a set of intervention components is important for moving the science of preventive medicine interventions forward. This understanding can often be achieved in an efficient and economical way via a factorial experiment, in which two or more independent variables are manipulated. The factorial experiment is a complement to the randomized controlled trial (RCT); the two designs address different research questions. Purpose This article offers an introduction to factorial experiments aimed at investigators trained primarily in the RCT. Method The factorial experiment is compared and contrasted with other experimental designs used commonly in intervention science to highlight where each is most efficient and appropriate. Results Several points are made: factorial experiments make very efficient use of experimental subjects when the data are properly analyzed; a factorial experiment can have excellent statistical power even if it has relatively few subjects per experimental condition; and when conducting research to select components for inclusion in a multicomponent intervention, interactions should be studied rather than avoided. Conclusions Investigators in preventive medicine and related areas should begin considering factorial experiments alongside other approaches. Experimental designs should be chosen from a resource management perspective, which states that the best experimental design is the one that provides the greatest scientific benefit without exceeding available resources. PMID:25092122

Supernova Dust Factory in M74

NASA Image and Video Library

2006-06-09

Astronomers using NASA Spitzer Space Telescope have spotted a dust factory 30 million light-years away in the spiral galaxy M74. The factory is located at the scene of a massive star explosive death, or supernova.

Baby Factories in Nigeria: Starting the Discussion Toward a National Prevention Policy.

PubMed

Makinde, Olusesan Ayodeji; Olaleye, Olalekan; Makinde, Olufunmbi Olukemi; Huntley, Svetlana S; Brown, Brandon

2017-01-01

Baby factories and baby harvesting are relatively new terms that involve breeding, trafficking, and abuse of infants and their biological mothers. Since it was first described in a United Nations Educational, Scientific and Cultural Organization report in Nigeria in 2006, several more baby factories have been discovered over the years. Infertile women are noted to be major patrons of these baby factories due to the stigmatization of childless couples in Southern Nigeria and issues around cultural acceptability of surrogacy and adoption. These practices have contributed to the growth in the industry which results in physical, psychological, and sexual violence to the victims. Tackling baby factories will involve a multifaceted approach that includes advocacy and enacting of legislation barring baby factories and infant trafficking and harsh consequences for their patrons. Also, programs to educate young girls on preventing unwanted pregnancies are needed. Methods of improving awareness and acceptability of adoption and surrogacy and reducing the administrative and legal bottlenecks associated with these options for infertile couples should be explored to diminish the importance of baby factories. © The Author(s) 2015.

A practical limit to trials needed in one-person randomized controlled experiments.

PubMed

Alemi, Roshan; Alemi, Farrokh

2007-01-01

Recently in this journal, J. Olsson and colleagues suggested the use of factorial experimental designs to guide a patient's efforts to choose among multiple interventions. These authors argue that factorial design, where every possible combination of the interventions is tried, is superior to sequential trial and errors. Factorial design is efficient in identifying the effectiveness of interventions (factor effect). Most patients care only about feeling better and not why their conditions are improving. If the goal of the patient is to get better and not to estimate the factor effect, then no control groups are needed. In this article, we show a modification in the factorial design of experiments proposed by Olsson and colleagues where a full-factorial design is planned, but experimentation is stopped when the patient's condition improves. With this modification, the number of trials is radically fewer than those needed by factorial design. For example, a patient trying out 4 different interventions with a median probability of success of .50 is expected to need 2 trials before stopping the experimentation in comparison with 32 in a full-factorial design.

1. GENERAL VIEW OF COMPLEX, SHOWING FACTORY BUILDING IN LEFT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW OF COMPLEX, SHOWING FACTORY BUILDING IN LEFT FOREGROUND, GRINDING PLATFORM AT REAR OF FACTORY, AND STABLE AREA AND OVERSEER'S HOUSE TO RIGHT - Caneel Bay Plantation, General Views, Cruz Bay, St. John, VI

Survey of Nitrate Ion Concentrations in Vegetables Cultivated in Plant Factories: Comparison with Open-Culture Vegetables.

PubMed

Oka, Yuka; Hirayama, Izumi; Yoshikawa, Mitsuhide; Yokoyama, Tomoko; Iida, Kenji; Iwakoshi, Katsushi; Suzuki, Ayana; Yanagihara, Midori; Segawa, Yukino; Kukimoto, Sonomi; Hamada, Humika; Matsuzawa, Satomi; Tabata, Setsuko; Sasamoto, Takeo

2017-01-01

A survey of nitrate-ion concentrations in plant-factory-cultured leafy vegetables was conducted. 344 samples of twenty-one varieties of raw leafy vegetables were examined using HPLC. The nitrate-ion concentrations in plant-factory-cultured leafy vegetables were found to be LOD-6,800 mg/kg. Furthermore, the average concentration values varied among different leafy vegetables. The average values for plant-factory-cultured leafy vegetables were higher than those of open-cultured leafy vegetables reported in previous studies, such as the values listed in the Standard Tables of Food Composition in Japan- 2015 - (Seventh revised edition). For some plant-factory-cultured leafy vegetables, such as salad spinach, the average values were above the maximum permissible levels of nitrate concentration in EC No 1258/2011; however, even when these plant-factory-cultured vegetables were routinely eaten, the intake of nitrate ions in humans did not exceed the ADI.

Expression in Escherichia coli, refolding and crystallization of Aspergillus niger feruloyl esterase A using a serial factorial approach.

PubMed

Benoit, Isabelle; Coutard, Bruno; Oubelaid, Rachid; Asther, Marcel; Bignon, Christophe

2007-09-01

Hydrolysis of plant biomass is achieved by the combined action of enzymes secreted by microorganisms and directed against the backbone and the side chains of plant cell wall polysaccharides. Among side chains degrading enzymes, the feruloyl esterase A (FAEA) specifically removes feruloyl residues. Thus, FAEA has potential applications in a wide range of industrial processes such as paper bleaching or bio-ethanol production. To gain insight into FAEA hydrolysis activity, we solved its crystal structure. In this paper, we report how the use of four consecutive factorial approaches (two incomplete factorials, one sparse matrix, and one full factorial) allowed expressing in Escherichia coli, refolding and then crystallizing Aspergillus niger FAEA in 6 weeks. Culture conditions providing the highest expression level were determined using an incomplete factorial approach made of 12 combinations of four E. coli strains, three culture media and three temperatures (full factorial: 36 combinations). Aspergillus niger FAEA was expressed in the form of inclusion bodies. These were dissolved using a chaotropic agent, and the protein was purified by affinity chromatography on Ni column under denaturing conditions. A suitable buffer for refolding the protein eluted from the Ni column was found using a second incomplete factorial approach made of 96 buffers (full factorial: 3840 combinations). After refolding, the enzyme was further purified by gel filtration, and then crystallized following a standard protocol: initial crystallization conditions were found using commercial crystallization screens based on a sparse matrix. Crystals were then optimized using a full factorial screen.

Integrating PCLIPS into ULowell's Lincoln Logs: Factory of the future

NASA Technical Reports Server (NTRS)

Mcgee, Brenda J.; Miller, Mark D.; Krolak, Patrick; Barr, Stanley J.

1990-01-01

We are attempting to show how independent but cooperating expert systems, executing within a parallel production system (PCLIPS), can operate and control a completely automated, fault tolerant prototype of a factory of the future (The Lincoln Logs Factory of the Future). The factory consists of a CAD system for designing the Lincoln Log Houses, two workcells, and a materials handling system. A workcell consists of two robots, part feeders, and a frame mounted vision system.

Factorial experiments: efficient tools for evaluation of intervention components.

PubMed

Collins, Linda M; Dziak, John J; Kugler, Kari C; Trail, Jessica B

2014-10-01

An understanding of the individual and combined effects of a set of intervention components is important for moving the science of preventive medicine interventions forward. This understanding can often be achieved in an efficient and economical way via a factorial experiment, in which two or more independent variables are manipulated. The factorial experiment is a complement to the RCT; the two designs address different research questions. To offer an introduction to factorial experiments aimed at investigators trained primarily in the RCT. The factorial experiment is compared and contrasted with other experimental designs used commonly in intervention science to highlight where each is most efficient and appropriate. Several points are made: factorial experiments make very efficient use of experimental subjects when the data are properly analyzed; a factorial experiment can have excellent statistical power even if it has relatively few subjects per experimental condition; and when conducting research to select components for inclusion in a multicomponent intervention, interactions should be studied rather than avoided. Investigators in preventive medicine and related areas should begin considering factorial experiments alongside other approaches. Experimental designs should be chosen from a resource management perspective, which states that the best experimental design is the one that provides the greatest scientific benefit without exceeding available resources. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Technology and Participation in Japanese Factories: The Consequences for Morale and Productivity.

ERIC Educational Resources Information Center

Hull, Frank; Azumi, Koya

1988-01-01

By fully using their human resources, Japanese factories mass produce goods of low cost and high quality. Participation in Japanese factories occurs in a more hierarchical framework than advocated in the Western model of worker democracy. (JOW)

Tracing the contamination origin of coliform bacteria in two small food-processing factories.

PubMed

Tominaga, Tatsuya; Sekine, Masahiro; Oyaizu, Hiroshi

2008-09-01

The objective of this study was to trace contamination sources of coliform bacteria by comparing the types of coliforms between food samples and the processing environments in two small food-processing factories (factories A and B). Fermentation tests of five sugars enabled the successful classification of 16 representative type strains into eight distinct groups. The grouping procedure was then applied to comparison of the coliform flora between food products and various locations in their processing environments. The consistency between each food and the tested locations was evaluated using the Jaccard index. The air conditioner and refrigeration room floor in factory A showed an index of 1.00, while the shaping machine in factory B showed an index of 0.98, indicating that these locations could be contamination sources. The validity of our results was confirmed by randomly amplified polymorphic DNA, which showed 100% matched profiles between the air conditioner and the food in factory A, and highly matched profiles between the machine and the food in factory B. This method for comparing the coliform flora between food and environments has the potential to be a reliable tracing tool for various food industries.

SWITCH: a dynamic CRISPR tool for genome engineering and metabolic pathway control for cell factory construction in Saccharomyces cerevisiae.

PubMed

Vanegas, Katherina García; Lehka, Beata Joanna; Mortensen, Uffe Hasbro

2017-02-08

The yeast Saccharomyces cerevisiae is increasingly used as a cell factory. However, cell factory construction time is a major obstacle towards using yeast for bio-production. Hence, tools to speed up cell factory construction are desirable. In this study, we have developed a new Cas9/dCas9 based system, SWITCH, which allows Saccharomyces cerevisiae strains to iteratively alternate between a genetic engineering state and a pathway control state. Since Cas9 induced recombination events are crucial for SWITCH efficiency, we first developed a technique TAPE, which we have successfully used to address protospacer efficiency. As proof of concept of the use of SWITCH in cell factory construction, we have exploited the genetic engineering state of a SWITCH strain to insert the five genes necessary for naringenin production. Next, the naringenin cell factory was switched to the pathway control state where production was optimized by downregulating an essential gene TSC13, hence, reducing formation of a byproduct. We have successfully integrated two CRISPR tools, one for genetic engineering and one for pathway control, into one system and successfully used it for cell factory construction.

1. FACTORY BUILDING VIEWED FROM THE EAST, CURING AND STORAGE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. FACTORY BUILDING VIEWED FROM THE EAST, CURING AND STORAGE WING TO THE LEFT, BOILING HOUSE IN THE CENTER, GRINDING PLATFORM TO THE FAR RIGHT, ST. THOMAS ISLAND VISIBLE IN BACKGROUND - Caneel Bay Plantation, Sugar Factory, Cruz Bay, St. John, VI

Autocrine and/or paracrine insulin-like growth factor-I activity in skeletal muscle

NASA Technical Reports Server (NTRS)

Adams, Gregory R.

2002-01-01

Similar to bone, skeletal muscle responds and adapts to changes in loading state via mechanisms that appear to be intrinsic to the muscle. One of the mechanisms modulating skeletal muscle adaptation it thought to involve the autocrine and/or paracrine production of insulinlike growth factor-I. This brief review outlines components of the insulinlike growth factor-I system as it relates to skeletal muscle and provides the rationale for the theory that insulinlike growth factor-I is involved with muscle adaptation.

Asymptotic Normality Through Factorial Cumulants and Partition Identities

PubMed Central

Bobecka, Konstancja; Hitczenko, Paweł; López-Blázquez, Fernando; Rempała, Grzegorz; Wesołowski, Jacek

2013-01-01

In the paper we develop an approach to asymptotic normality through factorial cumulants. Factorial cumulants arise in the same manner from factorial moments as do (ordinary) cumulants from (ordinary) moments. Another tool we exploit is a new identity for ‘moments’ of partitions of numbers. The general limiting result is then used to (re-)derive asymptotic normality for several models including classical discrete distributions, occupancy problems in some generalized allocation schemes and two models related to negative multinomial distribution. PMID:24591773

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai

Similar to a super B-factory, a circular Higgs factory will require strong focusing systems near the interaction points and a low-emittance lattice in arcs to achieve a factory luminosity. At electron beam energy of 120 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at 2 percent level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of circular Higgs factory. In this paper, an example will be provided to illustrate the beam dynamics in circular Higgs factory,more » emphasizing on the chromatic optics. Basic optical modules and advanced analysis will be presented. Most important, we will show that 2% momentum aperture is achievable« less

Congruences for central factorial numbers modulo powers of prime.

PubMed

Wang, Haiqing; Liu, Guodong

2016-01-01

Central factorial numbers are more closely related to the Stirling numbers than the other well-known special numbers, and they play a major role in a variety of branches of mathematics. In the present paper we prove some interesting congruences for central factorial numbers.

Midlands Teaching Factory, LTD.

ERIC Educational Resources Information Center

Midlands Technical Coll., Columbia, SC.

In 1987, Midlands Technical College (MTC), in Columbia, South Carolina, initiated a Computer Integrated Manufacturing (CIM) project, the Midlands Teaching Factory, LTD, which integrated various college departments with the goal of manufacturing a high quality, saleable product. The faculty developed a teaching factory model which was designed to…

Baby factories taint surrogacy in Nigeria.

PubMed

Makinde, Olusesan Ayodeji; Makinde, Olufunmbi Olukemi; Olaleye, Olalekan; Brown, Brandon; Odimegwu, Clifford O

2016-01-01

The practice of reproductive medicine in Nigeria is facing new challenges with the proliferation of 'baby factories'. Baby factories are buildings, hospitals or orphanages that have been converted into places for young girls and women to give birth to children for sale on the black market, often to infertile couples, or into trafficking rings. This practice illegally provides outcomes (children) similar to surrogacy. While surrogacy has not been well accepted in this environment, the proliferation of baby factories further threatens its acceptance. The involvement of medical and allied health workers in the operation of baby factories raises ethical concerns. The lack of a properly defined legal framework and code of practice for surrogacy makes it difficult to prosecute baby factory owners, especially when they are health workers claiming to be providing services to clients. In this environment, surrogacy and other assisted reproductive techniques urgently require regulation in order to define when ethico-legal lines have been crossed in providing surrogacy or surrogacy-like services. Copyright © 2015 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Operating a production pilot factory serving several scientific domains

NASA Astrophysics Data System (ADS)

Sfiligoi, I.; Würthwein, F.; Andrews, W.; Dost, J. M.; MacNeill, I.; McCrea, A.; Sheripon, E.; Murphy, C. W.

2011-12-01

Pilot infrastructures are becoming prominent players in the Grid environment. One of the major advantages is represented by the reduced effort required by the user communities (also known as Virtual Organizations or VOs) due to the outsourcing of the Grid interfacing services, i.e. the pilot factory, to Grid experts. One such pilot factory, based on the glideinWMS pilot infrastructure, is being operated by the Open Science Grid at University of California San Diego (UCSD). This pilot factory is serving multiple VOs from several scientific domains. Currently the three major clients are the analysis operations of the HEP experiment CMS, the community VO HCC, which serves mostly math, biology and computer science users, and the structural biology VO NEBioGrid. The UCSD glidein factory allows the served VOs to use Grid resources distributed over 150 sites in North and South America, in Europe, and in Asia. This paper presents the steps taken to create a production quality pilot factory, together with the challenges encountered along the road.

Factory daughters, the family, and nuptiality in Java.

PubMed

Wolf, D L

1990-01-01

The commercialization of agriculture, increasing landlessness, and an expanding labor class in rural areas of Java are all the result of industrialization. This work discusses the effect of female employment on marriage patterns of women working in rural factories. The central point is that employment has not only increased the financial autonomy of these women, but also increased the level of control they have over the choice of marriage partners. The data set used for analysis consisted of the observations of all factory workers and all non-factory females age 15-24 located in an agricultural village. The observations were make over a 15 month period between 1981-83. A follow up visit was made in 1986 and the following conclusions were then made: 1) the village study gave detailed data, but the data set was not large enough, thus a follow up study that encompasses more people is called for; 2) young rural female factory workers are more likely to chose their marriage partners than those engaged in traditional village labor. Of those that married and worked in factories, their fertility rate was significantly lower, compared to non-factory workers. Factory workers also had different family structures, because they spent less time living in extended families because of a larger income for the couple. This study indicates that increased economic control results in increased life decision control. This changed the daughter's economic relationship with her family and gives her more control in marriage decisions.

27 CFR 40.47 - Other businesses within factory.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Other businesses within... AND TUBES, AND PROCESSED TOBACCO Administrative Provisions § 40.47 Other businesses within factory. (a) General. The appropriate TTB officer may authorize such other businesses within the factory of a...

27 CFR 40.47 - Other businesses within factory.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Other businesses within... AND TUBES, AND PROCESSED TOBACCO Administrative Provisions § 40.47 Other businesses within factory. (a) General. The appropriate TTB officer may authorize such other businesses within the factory of a...

A rapid biochemical test to assess postharvest deterioration of sugarcane and milled juice

USDA-ARS?s Scientific Manuscript database

The delivery of consignments of deteriorated sugarcane to factories can detrimentally affect multiple process units, and even lead to a factory shut-down. An enzymatic factory method was used to measure mannitol, a major degradation product of sugarcane Leuconostoc deterioration in the U.S., in pre...

Factorial versus Typological Models: A Comparison of Methods for Personality Data

ERIC Educational Resources Information Center

von Davier, Matthias; Naemi, Bobby; Roberts, Richard D.

2012-01-01

This article describes an exploration of the distinction between typological and factorial latent variables in the domain of personality theory. Traditionally, many personality variables have been considered to be factorial in nature, even though there are examples of typological constructs dating back to Hippocrates. Recently, some…

A community-initiated study of blood lead levels of Nicaraguan children living near a battery factory.

PubMed Central

Morales Bonilla, C; Mauss, E A

1998-01-01

OBJECTIVES: In response to requests by parents in Managua, Nicaragua, whose neighborhood borders a battery factory, 97 children were tested for blood lead, as were 30 children in a neighborhood without an obvious source of environmental lead. METHODS: Venous blood was examined by atomic absorption spectrophotometry. Educational workshops were conducted. RESULTS: Mean blood lead levels were 17.21 +/- 9.92 micrograms/dL in the index children and 7.40 +/- 5.37 micrograms/dL in the controls (P < .001). CONCLUSIONS: Children living near the battery factory are at increased risk of lead poisoning. The parents were able to petition the government to control the factory emissions and to improve appropriate health services. The factory is now closed. PMID:9842385

A reference architecture for the component factory

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Caldiera, Gianluigi; Cantone, Giovanni

1992-01-01

Software reuse can be achieved through an organization that focuses on utilization of life cycle products from previous developments. The component factory is both an example of the more general concepts of experience and domain factory and an organizational unit worth being considered independently. The critical features of such an organization are flexibility and continuous improvement. In order to achieve these features we can represent the architecture of the factory at different levels of abstraction and define a reference architecture from which specific architectures can be derived by instantiation. A reference architecture is an implementation and organization independent representation of the component factory and its environment. The paper outlines this reference architecture, discusses the instantiation process, and presents some examples of specific architectures by comparing them in the framework of the reference model.

Acoustic scale modelling of factories, part II: 1-50 Cale model investigations of factory sound fields

NASA Astrophysics Data System (ADS)

Hodgson, M. R.; Orlowski, R. J.

1987-03-01

In this second part of a report on factory scale modelling use of a 1:50 scale variable model as a research tool is described. Details of the model are presented. The results of measurements of reverberation time and sound propagation, made in various model configurations, are used to investigate the main factors influencing factory sound fields, and the applicability of the Sabine theory to factories. The parameters investigated are the enclosure geometry (aspect ratio, volume and roof pitch), surface absorption and fittings (density, size, surface area, vertical distribution and specific types). Despite certain limitations and uncertainties resulting, for example, from surprising results associated with surface absorption, models are shown to be effective research tools. The inapplicability of the Sabine theory is confirmed and elucidated.

Implementing Clinical Research Using Factorial Designs: A Primer.

PubMed

Baker, Timothy B; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Fiore, Michael C; Piper, Megan E; Collins, Linda M

2017-07-01

Factorial experiments have rarely been used in the development or evaluation of clinical interventions. However, factorial designs offer advantages over randomized controlled trial designs, the latter being much more frequently used in such research. Factorial designs are highly efficient (permitting evaluation of multiple intervention components with good statistical power) and present the opportunity to detect interactions amongst intervention components. Such advantages have led methodologists to advocate for the greater use of factorial designs in research on clinical interventions (Collins, Dziak, & Li, 2009). However, researchers considering the use of such designs in clinical research face a series of choices that have consequential implications for the interpretability and value of the experimental results. These choices include: whether to use a factorial design, selection of the number and type of factors to include, how to address the compatibility of the different factors included, whether and how to avoid confounds between the type and number of interventions a participant receives, and how to interpret interactions. The use of factorial designs in clinical intervention research poses choices that differ from those typically considered in randomized clinical trial designs. However, the great information yield of the former encourages clinical researchers' increased and careful execution of such designs. Copyright © 2017. Published by Elsevier Ltd.

"Mixing" as an ethnoetiology of HIV/AIDS in Malaysia's multinational factories.

PubMed

Root, Robin

2006-09-01

Minah Karan, the stigmatizing label appended to Malay factory women in the 1980s, signaled a dangerous female sexuality that risked spreading beyond the factory gates and infecting Malaysia's idea(l)s of its traditional kampung culture. This article narrates how Minah Karan, as the former antihero of development, was reconstituted in the 1990s, with the government's labeling of factories as "high-risk settings" for HIV/AIDS. This is an ethnoetiology based not on any evidential epidemiological data but on the racial and gendered "mixing" that transpires behind factory walls: a fear that the "mixing of the sexes" means ipso facto "sexual mixing" among the races. The article demonstrates how importation of the high-risk label articulates at the local level the new and contested linkages, economic, religious, and scientific, constitutive of globalization. The pragmatic nature and imperatives of this high-risk process are discerned in factory women's accounts of how they negotiate the interactional imperatives of factory work, because transnational structures of productivity violate the social boundaries that have long connoted political stability, moral integrity, ethnic community, and individual safety. The article concludes by questioning whether ethnoetiologies, especially when they concern sexual networks, become social etiologies, because this would locate ethnoetiologies as central to conventional public health praxis rather than as ethnographic exotica in the margins.

A new programming metaphor for image processing procedures

NASA Technical Reports Server (NTRS)

Smirnov, O. M.; Piskunov, N. E.

1992-01-01

Most image processing systems, besides an Application Program Interface (API) which lets users write their own image processing programs, also feature a higher level of programmability. Traditionally, this is a command or macro language, which can be used to build large procedures (scripts) out of simple programs or commands. This approach, a legacy of the teletypewriter has serious drawbacks. A command language is clumsy when (and if! it attempts to utilize the capabilities of a multitasking or multiprocessor environment, it is but adequate for real-time data acquisition and processing, it has a fairly steep learning curve, and the user interface is very inefficient,. especially when compared to a graphical user interface (GUI) that systems running under Xll or Windows should otherwise be able to provide. ll these difficulties stem from one basic problem: a command language is not a natural metaphor for an image processing procedure. A more natural metaphor - an image processing factory is described in detail. A factory is a set of programs (applications) that execute separate operations on images, connected by pipes that carry data (images and parameters) between them. The programs function concurrently, processing images as they arrive along pipes, and querying the user for whatever other input they need. From the user's point of view, programming (constructing) factories is a lot like playing with LEGO blocks - much more intuitive than writing scripts. Focus is on some of the difficulties of implementing factory support, most notably the design of an appropriate API. It also shows that factories retain all the functionality of a command language (including loops and conditional branches), while suffering from none of the drawbacks outlined above. Other benefits of factory programming include self-tuning factories and the process of encapsulation, which lets a factory take the shape of a standard application both from the system and the user's point of view, and thus be used as a component of other factories. A bare-bones prototype of factory programming was implemented under the PcIPS image processing system, and a complete version (on a multitasking platform) is under development.

Design, analysis and presentation of factorial randomised controlled trials

PubMed Central

Montgomery, Alan A; Peters, Tim J; Little, Paul

2003-01-01

Background The evaluation of more than one intervention in the same randomised controlled trial can be achieved using a parallel group design. However this requires increased sample size and can be inefficient, especially if there is also interest in considering combinations of the interventions. An alternative may be a factorial trial, where for two interventions participants are allocated to receive neither intervention, one or the other, or both. Factorial trials require special considerations, however, particularly at the design and analysis stages. Discussion Using a 2 × 2 factorial trial as an example, we present a number of issues that should be considered when planning a factorial trial. The main design issue is that of sample size. Factorial trials are most often powered to detect the main effects of interventions, since adequate power to detect plausible interactions requires greatly increased sample sizes. The main analytical issues relate to the investigation of main effects and the interaction between the interventions in appropriate regression models. Presentation of results should reflect the analytical strategy with an emphasis on the principal research questions. We also give an example of how baseline and follow-up data should be presented. Lastly, we discuss the implications of the design, analytical and presentational issues covered. Summary Difficulties in interpreting the results of factorial trials if an influential interaction is observed is the cost of the potential for efficient, simultaneous consideration of two or more interventions. Factorial trials can in principle be designed to have adequate power to detect realistic interactions, and in any case they are the only design that allows such effects to be investigated. PMID:14633287

A Survey of the Medical Needs of a Group of Small Factories*

PubMed Central

Lee, W. R.

1962-01-01

The present interest in medical services for small factories is matched by the limited objective information which is available on the demand for and needs of such services. As a teaching project, a survey was made of factories with between 30 and 200 employees on an estate in the North West where there was no organized medical service. Unfortunately, time allowed only 22 factories to be visited. The findings, therefore, are regarded as indicative rather than conclusive, but this does not detract from their interest. Factories were visited by two or three postgraduate students who completed a questionnaire designed to standardize their findings. The questionnaire is included as an appendix to this paper. Regarding the demand for medical services, four of the 22 factories were subsidiaries of larger organizations and had part-time medical advice, 14 expressed no interest even if this would have involved no financial commitment, and the remaining four were interested for differing reasons. The needs of the factories in this context were found to be, first, advice and perhaps better supervision of non-mechanical hazards and, secondly, supervision of the first aid arrangements. From the ambulance journey records of the local authority there appeared to be no great demand for local casualty facilities. To meet these needs it is suggested that the functions of the appointed factory doctor might be modified to include wider supervision of non-mechanical hazards and supervision of first aid arrangements. It is also suggested that the National Health Service should form the basis for dealing with those cases requiring more than first aid. PMID:14463582

Students Tackle Academics in Practical Context at Skateboard Factory

ERIC Educational Resources Information Center

Pearson, George

2012-01-01

High school student Nick Robertson came to Oasis Skateboard Factory (OSF) from a suburban Toronto district. He was surfing the web when he spotted a reference to Oasis Skateboard Factory, an alternative program in the Toronto District School Board. He says his first reaction was "Skateboards in school? It didn't seem possible." He…

Muon Accelerator Program (MAP) | Homepage

Science.gov Websites

collider and neutrino factory Scientists around the world are developing the technologies necessary for a factory or a muon collider. Read more: Neutrino factory Muon collider Developing a muon source One of the developing and testing RF cavities and magnets for a muon beamline. The facility allows scientists to test

37. NORTH TO BINS ALONG NORTH WALL OF FACTORY BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. NORTH TO BINS ALONG NORTH WALL OF FACTORY BUILDING WHICH REMAIN FILLED WITH NEW OLD STOCK AND USED PARTS FOR ELI WINDMILLS. THE ROPE AT THE LOWER FOREGROUND WAS USED IN ERECTING WINDMILLS AND TOWERS FOR CUSTOMERS. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

The first use of a HPLC system at a Louisiana Sugarcane Factory: What it can do for you

USDA-ARS?s Scientific Manuscript database

Alma Plantation sugarcane factory established and operated the first High Performance Liquid Chromatography (HPLC) system in Louisiana in 2015. Although many HPLC systems exist, the factory opted for a ThermoFisherTM ion chromatography (anion exchange) system with integrated pulsed amperometric det...

Factory-Calibrated Continuous Glucose Sensors: The Science Behind the Technology.

PubMed

Hoss, Udo; Budiman, Erwin Satrya

2017-05-01

The use of commercially available continuous glucose monitors for diabetes management requires sensor calibrations, which until recently are exclusively performed by the patient. A new development is the implementation of factory calibration for subcutaneous glucose sensors, which eliminates the need for user calibrations and the associated blood glucose tests. Factory calibration means that the calibration process is part of the sensor manufacturing process and performed under controlled laboratory conditions. The ability to move from a user calibration to factory calibration is based on several technical requirements related to sensor stability and the robustness of the sensor manufacturing process. The main advantages of factory calibration over the conventional user calibration are: (a) more convenience for the user, since no more fingersticks are required for calibration and (b) elimination of use errors related to the execution of the calibration process, which can lead to sensor inaccuracies. The FreeStyle Libre ™ and FreeStyle Libre Pro ™ flash continuous glucose monitoring systems are the first commercially available sensor systems using factory-calibrated sensors. For these sensor systems, no user calibrations are required throughout the sensor wear duration.

Incense and joss stick making in small household factories, Thailand.

PubMed

Siripanich, S; Siriwong, W; Keawrueang, P; Borjan, M; Robson, M

2014-07-01

Incense and joss stick are generally used in the world. Most products were made in small household factories. There are many environmental and occupational hazards in these factories. To evaluate the workplace environmental and occupational hazards in small household incense and joss stick factories in Roi-Et, Thailand. Nine small household factories in rural areas of Roi-Et, Thailand, were studied. Dust concentration and small aerosol particles were counted through real time exposure monitoring. The inductively coupled plasma optical emission spectrometry (ICP-OES) was used for quantitative measurement of heavy metal residue in incense products. Several heavy metals were found in dissolved dye and joss sticks. Those included barium, manganese, and lead. Rolling and shaking processes produced the highest concentration of dust and aerosols. Only 3.9% of female workers used personal protection equipment. Dust and chemicals were major threats in small household incense and joss stick factories in Thailand. Increasing awareness towards using personal protection equipment and emphasis on elimination of environmental workplace hazards should be considered to help the workers of this industry.

Entrepreneurship Education through Industrial Internship for Technical and Vocational Students

NASA Astrophysics Data System (ADS)

Sumual, H.; Soputan, G. J.

2018-02-01

The spirit of entrepreneurship must be formed in an integrated process in learning so that commitment, responsibility and work ethic on the candidate of vocational high school graduates are effectively promoted. Learning teaching factory teaches students how to find problems, build prototypes, learn to make business plan, and learn to present their own solutions. The research objective is to assess the effectiveness of Teaching Factory implementation in improving the competence and skills of students in the field of entrepreneurship. The method used in this research is case study. Key informants were determined purposively in charge of teaching factory, students, and teachers who teach in productive subject. The results achieved in this study are: 1) culinary and hospitality units are the most active groups in producing products for teaching factory, 2) the role of entrepreneurial groups in each unit of production in order to increase productivity 3) students earn revenues of teaching factory and production unit get percentage of product or service sales, 3) the role of each production unit determines the level of teaching factory effectiveness.

Design of Experiments with Multiple Independent Variables: A Resource Management Perspective on Complete and Reduced Factorial Designs

PubMed Central

Collins, Linda M.; Dziak, John J.; Li, Runze

2009-01-01

An investigator who plans to conduct experiments with multiple independent variables must decide whether to use a complete or reduced factorial design. This article advocates a resource management perspective on making this decision, in which the investigator seeks a strategic balance between service to scientific objectives and economy. Considerations in making design decisions include whether research questions are framed as main effects or simple effects; whether and which effects are aliased (confounded) in a particular design; the number of experimental conditions that must be implemented in a particular design and the number of experimental subjects the design requires to maintain the desired level of statistical power; and the costs associated with implementing experimental conditions and obtaining experimental subjects. In this article four design options are compared: complete factorial, individual experiments, single factor, and fractional factorial designs. Complete and fractional factorial designs and single factor designs are generally more economical than conducting individual experiments on each factor. Although relatively unfamiliar to behavioral scientists, fractional factorial designs merit serious consideration because of their economy and versatility. PMID:19719358

Quantum computation with realistic magic-state factories

NASA Astrophysics Data System (ADS)

O'Gorman, Joe; Campbell, Earl T.

2017-03-01

Leading approaches to fault-tolerant quantum computation dedicate a significant portion of the hardware to computational factories that churn out high-fidelity ancillas called magic states. Consequently, efficient and realistic factory design is of paramount importance. Here we present the most detailed resource assessment to date of magic-state factories within a surface code quantum computer, along the way introducing a number of techniques. We show that the block codes of Bravyi and Haah [Phys. Rev. A 86, 052329 (2012), 10.1103/PhysRevA.86.052329] have been systematically undervalued; we track correlated errors both numerically and analytically, providing fidelity estimates without appeal to the union bound. We also introduce a subsystem code realization of these protocols with constant time and low ancilla cost. Additionally, we confirm that magic-state factories have space-time costs that scale as a constant factor of surface code costs. We find that the magic-state factory required for postclassical factoring can be as small as 6.3 million data qubits, ignoring ancilla qubits, assuming 10-4 error gates and the availability of long-range interactions.

Factory-Calibrated Continuous Glucose Sensors: The Science Behind the Technology

PubMed Central

Budiman, Erwin Satrya

2017-01-01

Abstract The use of commercially available continuous glucose monitors for diabetes management requires sensor calibrations, which until recently are exclusively performed by the patient. A new development is the implementation of factory calibration for subcutaneous glucose sensors, which eliminates the need for user calibrations and the associated blood glucose tests. Factory calibration means that the calibration process is part of the sensor manufacturing process and performed under controlled laboratory conditions. The ability to move from a user calibration to factory calibration is based on several technical requirements related to sensor stability and the robustness of the sensor manufacturing process. The main advantages of factory calibration over the conventional user calibration are: (a) more convenience for the user, since no more fingersticks are required for calibration and (b) elimination of use errors related to the execution of the calibration process, which can lead to sensor inaccuracies. The FreeStyle Libre™ and FreeStyle Libre Pro™ flash continuous glucose monitoring systems are the first commercially available sensor systems using factory-calibrated sensors. For these sensor systems, no user calibrations are required throughout the sensor wear duration. PMID:28541139

Elemental source attribution signatures for calcium ammonium nitrate (CAN) fertilizers used in homemade explosives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fraga, Carlos G.; Mitroshkov, Alexander V.; Mirjankar, Nikhil S.

Calcium ammonium nitrate (CAN) is a widely available fertilizer composed of ammonium nitrate mixed with some form of calcium carbonate such as limestone or dolomite. CAN is also frequently used to make homemade explosives. The potential of using elemental profiling and chemometrics to match both pristine and reprocessed CAN fertilizers to their factories for use in future forensic investigations was examined. Inductively coupled plasma-mass spectrometry (ICP-MS) analysis was performed on 64 elements in 125 samples from 11 CAN stocks from 6 different CAN factories. Fisher ratio, degree-of-class-separation, and partial least squares discriminant analysis (PLSDA) were used to develop a modelmore » using the concentrations of Na, V, Mn, Cu, Ga, Sr, Ba and U to classify a validation set of CAN samples into 5 factory groups; one group was two factories from the same fertilizer company. In terms of the pristine CAN samples, i.e., unadulterated prills, 64% of the test samples were matched to their correct factory group with zero false positives. The same PLSDA model was used to correctly match 100% of the CAN samples that were reprocessed by crushing and mixing the CAN with powdered sugar. In the case of crushed CAN samples mixed with aluminum powder, correct matches were made for zero to 100% of the samples depending on the factory the CAN originated. Remarkably, for one factory, 100% of the ammonium nitrate samples that were extracted from CAN using tap or bottled water were matched to the correct CAN factory group. Lastly, the water-insoluble (calcium carbonate) portions of CAN provided a greater degree of discrimination between factories than the water-soluble portions of CAN. In summary, this work illustrates that sourcing unadulterated CAN fertilizer can potentially be done with high frequency and high confidence using elemental profiling and chemometrics while the sourcing of reprocessed CAN is dependent on how much an adulterant alters the recovered elemental profile of CAN.« less

[Analysis of musculoskeletal disorders, work load and working postures among manufacturing workers].

PubMed

Yu, Shan-fa; Gu, Gui-zhen; Sun, Shi-yi; Wang, Hai-sheng; Cui, Shou-ming; Yang, Xiao-fa; Yang, Shu-le; He, Li-hua; Wang, Sheng

2011-03-01

To analyze the distribution of the musculoskeletal disorders, work load and working postures in different factories, gender, education levels, age and working years among manufacturing workers. In a cross-sectional study of 5134 manufacturing workers in 12 factories, the morbidities for musculoskeletal disorders in one year period were measured with questionnaires. The morbidities for musculoskeletal disorders in body sites: waist, neck, shoulder, wrist, ankle/feet, knee, hip/buttocks and elbows were 59.7%, 47.9%, 38.1%, 33.7%, 26.9%, 25.4%, 15.2%, and 14.9%, respectively in one year period. There were significant differences of morbidities for musculoskeletal symptoms in body sites of workers among different factories (P < 0.05 or P < 0.01). The morbidities of musculoskeletal symptoms in elbows, waist, wrists and ankle/feet of the workers in refractory material and chemical fiber factories were higher than those in other factories, the morbidities for musculoskeletal symptoms of workers in garments and diamond factories were lower than those in other factories. The morbidities for musculoskeletal symptoms in neck, shoulders and wrists of female workers were significantly higher than those of male workers (P < 0.01). There were significant differences of the morbidities for musculoskeletal symptoms in body sites among workers with different educational levels (P < 0.05 or P < 0.01). There were significant differences of the morbidities for musculoskeletal symptoms in neck, shoulders, wrists, hip/buttocks and knee among groups with different age or different working years (P < 0.01), and the morbidities for musculoskeletal symptoms increased with age and working years. The proportions of unhealthy working postures and high working load among workers in refractory material and chemical fiber factories were higher; but those in garments and diamond factories were lower. The morbidities for musculoskeletal symptoms in waist, neck, shoulder and wrists of workers in manufacturing workers were higher; the gender, education level, age and working years could influenced the morbidities for musculoskeletal disorders.

Presence of sourdough lactic acid bacteria in commercial total mixed ration silage as revealed by denaturing gradient gel electrophoresis analysis.

PubMed

Wang, C; Nishino, N

2010-10-01

To characterize the bacterial communities in commercial total mixed ration (TMR) silage, which is known to have a long bunk life after silo opening. Samples were collected from four factories that produce TMR silage according to their own recipes. Three factories were sampled three times at 1-month intervals during the summer to characterize the differences between factories; one factory was sampled 12 times, three samples each during the summer, autumn, winter and spring, to determine seasonal changes. Bacterial communities were determined by culture-independent denaturing gradient gel electrophoresis. All silages contained lactic acid as the predominant acid, and the contents appeared stable regardless of factories and product seasons. Acetic acid and 1-propanol contents were different between factories and indicated seasonal changes, with increases in warm seasons compared to cool seasons. Both differences and similarities existed among the bacterial communities from each factory and product season. Lactobacillus parabuchneri was found in the products from three of four factories. Various sourdough lactic acid bacteria (LAB) were identified in commercial TMR silage; Lactobacillus panis, Lactobacillus hammesii, Lactobacillus mindensis, Lactobacillus pontis, Lactobacillus frumenti and Lactobacillus farciminis were detected in many products. Moreover, changes owing to product season were distinctive, and Lact. pontis and Lact. frumenti became detectable in summer products. Sourdough LAB are involved in the ensiling of commercial TMR silage. Silage bacterial communities vary more by season than by factory. The LAB species Lact. parabuchneri was detected in the TMR silage but may not be essential to the product's long bunk life after silo opening. Commercial TMR silage resembles sourdough with respect to bacterial communities and long shelf life. The roles of sourdough LAB in the ensiling process and aerobic stability are worth examining. © 2010 The Authors. Journal compilation © 2010 The Society for Applied Microbiology.

Impact of a private sector living wage intervention on depressive symptoms among apparel workers in the Dominican Republic: a quasi-experimental study

PubMed Central

Burmaster, Katharine B; Landefeld, John C; Rehkopf, David H; Lahiff, Maureen; Sokal-Gutierrez, Karen; Adler-Milstein, Sarah; Fernald, Lia C H

2015-01-01

Objectives Poverty reduction interventions through cash transfers and microcredit have had mixed effects on mental health. In this quasi-experimental study, we evaluate the effect of a living wage intervention on depressive symptoms of apparel factory workers in the Dominican Republic. Setting Two apparel factories in the Dominican Republic. Participants The final sample consisted of 204 hourly wage workers from the intervention (99) and comparison (105) factories. Interventions In 2010, an apparel factory began a living wage intervention including a 350% wage increase and significant workplace improvements. The wage increase was plausibly exogenous because workers were not aware of the living wage when applying for jobs and expected to be paid the usual minimum wage. These individuals were compared with workers at a similar local factory paying minimum wage, 15–16 months postintervention. Primary outcome measures Workers’ depressive symptoms were assessed using the Center for Epidemiologic Studies-Depression Scale (CES-D). Ordinary least squares and Poisson regressions were used to evaluate treatment effect of the intervention, adjusted for covariates. Results Intervention factory workers had fewer depressive symptoms than comparison factory workers (unadjusted mean CES-D scores: 10.6±9.3 vs 14.7±11.6, p=0.007). These results were sustained when controlling for covariates (β=−5.4, 95% CI −8.5 to −2.3, p=0.001). In adjusted analyses using the standard CES-D clinical cut-off of 16, workers at the intervention factory had a 47% reduced risk of clinically significant levels of depressive symptoms compared with workers at the comparison factory (23% vs 40%). Conclusions Policymakers have long grappled with how best to improve mental health among populations in low-income and middle-income countries. We find that providing a living wage and workplace improvements to improve income and well-being in a disadvantaged population is associated with reduced depressive symptoms. PMID:26238394

A Hospital Is Not Just a Factory, but a Complex Adaptive System-Implications for Perioperative Care.

PubMed

Mahajan, Aman; Islam, Salim D; Schwartz, Michael J; Cannesson, Maxime

2017-07-01

Many methods used to improve hospital and perioperative services productivity and quality of care have assumed that the hospital is essentially a factory, and therefore, that industrial engineering and manufacturing-derived redesign approaches such as Six Sigma and Lean can be applied to hospitals and perioperative services just as they have been applied in factories. However, a hospital is not merely a factory but also a complex adaptive system (CAS). The hospital CAS has many subsystems, with perioperative care being an important one for which concepts of factory redesign are frequently advocated. In this article, we argue that applying only factory approaches such as lean methodologies or process standardization to complex systems such as perioperative care could account for difficulties and/or failures in improving performance in care delivery. Within perioperative services, only noncomplex/low-variance surgical episodes are amenable to manufacturing-based redesign. On the other hand, complex surgery/high-variance cases and preoperative segmentation (the process of distinguishing between normal and complex cases) can be viewed as CAS-like. These systems tend to self-organize, often resist or react unpredictably to attempts at control, and therefore require application of CAS principles to modify system behavior. We describe 2 examples of perioperative redesign to illustrate the concepts outlined above. These examples present complementary and contrasting cases from 2 leading delivery systems. The Mayo Clinic example illustrates the application of manufacturing-based redesign principles to a factory-like (high-volume, low-risk, and mature practice) clinical program, while the Kaiser Permanente example illustrates the application of both manufacturing-based and self-organization-based approaches to programs and processes that are not factory-like but CAS-like. In this article, we describe how factory-like processes and CAS can coexist within a hospital and how self-organization-based approaches can be used to improve care delivery in many situations where manufacturing-based approaches may not be appropriate.

Burnout Factories: The Challenge of Retaining Great Teachers in Charter Schools

ERIC Educational Resources Information Center

Fusco, Mark

2017-01-01

In its well-intentioned effort to create alternatives to public school dropout factories, the charter school sector has created teacher burnout factories. But it does not have to be this way. Charter schools can continue to maintain high standards while creating a more sustainable work environment for teachers. This article examines the teacher…

Poor but Not Powerless: Women Workers in Production Chain Factories in China

ERIC Educational Resources Information Center

Ma, Lang; Jacobs, Francine

2010-01-01

The present study demonstrates the processes by which 12 young women working in four production chain factories in China shape their own lives--their developmental trajectories--during the period following their entry into factory work. One-on-one, in-depth, semi-structured interviews were conducted in August, 2005, as part of an evaluation…

Factorial Validity and Invariance Testing of the Exercise Dependence Scale-Revised in Swedish and Portuguese Exercisers

ERIC Educational Resources Information Center

Lindwall, Magnus; Palmeira, Antonio

2009-01-01

The present study investigated the factorial validity and factorial invariance of the 21-item Exercise Dependence Scale-Revised using 162 Swedish and 269 Portuguese exercisers. In addition, the prevalence of exercise dependence symptoms and links to exercise behavior, gender, and age in the two samples was also studied. Confirmatory factor…

19 CFR Appendix B to Part 191 - Sample Formats for Applications for Specific Manufacturing Drawback Rulings

Code of Federal Regulations, 2010 CFR

2010-04-01

... (see § 191.8(a)).) LOCATION OF FACTORY (Give the address of the factory(s) where the process of... article described under the PROCESS OF MANUFACTURE OR PRODUCTION section below and each article listed... manufacture or production by giving a thorough description of the manufacturing process. This description...

Factory overload testing of a large power transformer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas, D.H.; Lawrence, C.O.; Templeton, J.B.

1985-09-01

A factory overload test of up to 150% of the nameplate rating was run on a 224 MVA autotransformer. The results of this test were of great value and were used in identifying transformer overload limitations, in evaluating loading guide oil and winding equations, exponents and time constants, and in helping to perfect a factory overload test procedure.

Discrimination of Swiss cheese from 5 different factories by high impact volatile organic compound profiles determined by odor activity value using selected ion flow tube mass spectrometry and odor threshold.

PubMed

Taylor, Kaitlyn; Wick, Cheryl; Castada, Hardy; Kent, Kyle; Harper, W James

2013-10-01

Swiss cheese contains more than 200 volatile organic compounds (VOCs). Gas chromatography-mass spectrometry has been utilized for the analysis of volatile compounds in food products; however, it is not sensitive enough to measure VOCs directly in the headspace of a food at low concentrations. Selected ion flow tube mass spectrometry (SIFT-MS) provides a basis for determining the concentrations of VOCs in the head space of the sample in real time at low concentration levels of parts per billion/trillion by volume. Of the Swiss cheese VOCs, relatively few have a major impact on flavor quality. VOCs with odor activity values (OAVs) (concentration/odor threshold) greater than one are considered high-impact flavor compounds. The objective of this study was to utilize SIFT-MS concentrations in conjunction with odor threshold values to determine OAVs thereby identifying high-impact VOCs to use for differentiating Swiss cheese from five factories and identify the factory variability. Seventeen high-impact VOCs were identified for Swiss cheese based on an OAV greater than one in at least 1 of the 5 Swiss cheese factories. Of these, 2,3-butanedione was the only compound with significantly different OAVs in all factories; however, cheese from any pair of factories had multiple statistically different compounds based on OAV. Principal component analysis using soft independent modeling of class analogy statistical differentiation plots, with all of the OAVs, showed differentiation between the 5 factories. Overall, Swiss cheese from different factories was determined to have different OAV profiles utilizing SIFT-MS to determine OAVs of high impact compounds. © 2013 Institute of Food Technologists®

Toroidal magnetized iron neutrino detector for a neutrino factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bross, A.; Wands, R.; Bayes, R.

2013-08-01

A neutrino factory has unparalleled physics reach for the discovery and measurement of CP violation in the neutrino sector. A far detector for a neutrino factory must have good charge identification with excellent background rejection and a large mass. An elegant solution is to construct a magnetized iron neutrino detector (MIND) along the lines of MINOS, where iron plates provide a toroidal magnetic field and scintillator planes provide 3D space points. In this report, the current status of a simulation of a toroidal MIND for a neutrino factory is discussed in light of the recent measurements of largemore » $$\\theta_{13}$$. The response and performance using the 10 GeV neutrino factory configuration are presented. It is shown that this setup has equivalent $$\\delta_{CP}$$ reach to a MIND with a dipole field and is sensitive to the discovery of CP violation over 85% of the values of $$\\delta_{CP}$$.« less

Gynecologic pain related to occupational stress among female factory workers in Tianjin, China

PubMed Central

Sznajder, Kristin K; Harlow, Siobán D; Burgard, Sarah A; Wang, Yanrang; Han, Cheng; Liu, Jing

2014-01-01

Background: Dysmenorrhea, dyspareunia, and non-cyclic pelvic pain are health concerns for factory workers in China and may be increased by occupational stress. Objectives: To estimate the prevalence and demographic and occupational factors associated with three types of gynecologic pain among female factory workers in Tianjin. Methods: The study included 651 female workers from three factories in Tianjin, China. Logistic regression models were estimated to determine associations between occupational stress and gynecologic pain. Results: Occupational stress including high job strain, exhaustion, and stress related to working conditions was a risk factor for gynecologic pain. High job strain and poor job security were associated with an increased risk for dysmenorrhea. Compulsory overtime and exhaustion were associated with increased non-cyclic pelvic pain. Working overtime and exhaustion were associated with increased dyspareunia. Conclusions: As China’s population of female factory workers grows, research on the reproductive health of this population is essential. PMID:24804338

Metabolic modelling in the development of cell factories by synthetic biology

PubMed Central

Jouhten, Paula

2012-01-01

Cell factories are commonly microbial organisms utilized for bioconversion of renewable resources to bulk or high value chemicals. Introduction of novel production pathways in chassis strains is the core of the development of cell factories by synthetic biology. Synthetic biology aims to create novel biological functions and systems not found in nature by combining biology with engineering. The workflow of the development of novel cell factories with synthetic biology is ideally linear which will be attainable with the quantitative engineering approach, high-quality predictive models, and libraries of well-characterized parts. Different types of metabolic models, mathematical representations of metabolism and its components, enzymes and metabolites, are useful in particular phases of the synthetic biology workflow. In this minireview, the role of metabolic modelling in synthetic biology will be discussed with a review of current status of compatible methods and models for the in silico design and quantitative evaluation of a cell factory. PMID:24688669

In-Factory Learning - Qualification For The Factory Of The Future

NASA Astrophysics Data System (ADS)

Quint, Fabian; Mura, Katharina; Gorecky, Dominic

2015-07-01

The Industry 4.0 vision anticipates that internet technologies will find their way into future factories replacing traditional components by dynamic and intelligent cyber-physical systems (CPS) that combine the physical objects with their digital representation. Reducing the gap between the real and digital world makes the factory environment more flexible, more adaptive, but also more complex for the human workers. Future workers require interdisciplinary competencies from engineering, information technology, and computer science in order to understand and manage the diverse interrelations between physical objects and their digital counterpart. This paper proposes a mixed-reality based learning environment, which combines physical objects and visualisation of digital content via Augmented Reality. It uses reality-based interaction in order to make the dynamic interrelations between real and digital factory visible and tangible. We argue that our learning system does not work as a stand-alone solution, but should fit into existing academic and advanced training curricula.

The landing of field mosquitoes on permethrin-treated military uniforms in queensland, australia.

PubMed

Frances, S P; Mackenzie, D O; Sferopoulos, R; Lee, Bin

2014-12-01

A study to evaluate the protection provided by permethrin-treated military fabric following cold-water washing against host-seeking mosquitoes is reported. The landing/probing of native mosquitoes on Australian Defence Force Disruptive Pattern Combat Uniform shirts treated by dipping in 0.6% permethrin emulsion (Perigen Defence®, containing 500 g/l permethrin), and commercial factory treatments in the USA (Factory A) and Europe (Factory B) were recorded after 0, 1, 3, 5, and 10 washes. The study showed that significantly shorter landing/probing times compared with untreated controls were recorded for shirts treated with Factory A treatment after 0 and 1 wash, and for the Factory B treatment after 0 washes, and there were no differences between permethrin treatment and control landing. The study concludes that better methods to assess protection from landing/probing mosquitoes in the field are needed.

Arcnet(R) On-Fiber -- A Viable Factory Automation Alternative

NASA Astrophysics Data System (ADS)

Karlin, Geof; Tucker, Carol S.

1987-01-01

Manufacturers need to improve their operating methods and increase their productivity so they can compete successfully in the marketplace. This goal can be achieved through factory automation, and the key to this automation is successful data base management and factory integration. However, large scale factory automation and integration requires effective communications, and this has given rise to an interest in various Local Area Networks or LANs. In a completely integrated and automated factory, the entire organization must have access to the data base, and all departments and functions must be able to communicate with each other. Traditionally, these departments and functions use incompatible equipment, and the ability to make such equipment communicate presents numerous problems. ARCNET, a token-passing LAN which has a significant presence in the office environment today, coupled with fiber optic cable, the cable of the future, provide an effective, low-cost solution to a number of these problems.

A Profile-Based Framework for Factorial Similarity and the Congruence Coefficient.

PubMed

Hartley, Anselma G; Furr, R Michael

2017-01-01

We present a novel profile-based framework for understanding factorial similarity in the context of exploratory factor analysis in general, and for understanding the congruence coefficient (a commonly used index of factor similarity) specifically. First, we introduce the profile-based framework articulating factorial similarity in terms of 3 intuitive components: general saturation similarity, differential saturation similarity, and configural similarity. We then articulate the congruence coefficient in terms of these components, along with 2 additional profile-based components, and we explain how these components resolve ambiguities that can be-and are-found when using the congruence coefficient. Finally, we present secondary analyses revealing that profile-based components of factorial are indeed linked to experts' actual evaluations of factorial similarity. Overall, the profile-based approach we present offers new insights into the ways in which researchers can examine factor similarity and holds the potential to enhance researchers' ability to understand the congruence coefficient.

Green lumber grade yields from factory grade logs of three oak species

Treesearch

Daniel A. Yaussy

1986-01-01

Multivariate regression models were developed to predict green board foot yields for the seven common factory lumber grades processed from white, black, and chestnut oak factory grade logs. These models use the standard log measurements of grade, scaling diameter, log length, and proportion of scaling defect. Any combination of lumber grades (such as 1 Common and...

Hardwood log grades and lumber grade yields for factory lumber logs

Treesearch

Leland F. Hanks; Glenn L. Gammon; Robert L. Brisbin; Everette D. Rast

1980-01-01

The USDA Forest Service Standard Grades for Hardwood Factory Lumber Logs are described, and lumber grade yields for 16 species and 2 species groups are presented by log grade and log diameter. The grades enable foresters, log buyers, and log sellers to select and grade those log suitable for conversion into standard factory grade lumber. By using the apropriate lumber...

26 CFR 1.897-2 - United States real property holding corporations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... value of $500,000. DC's only real property interest was a factory that it had occupied for over 50 years, which had a book value of $200,000. The factory was located in a deteriorated downtown area, and DC had... time of DC's December 31, 1989 determination date, the downtown area in which DC's factory was located...

26 CFR 1.897-2 - United States real property holding corporations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... value of $500,000. DC's only real property interest was a factory that it had occupied for over 50 years, which had a book value of $200,000. The factory was located in a deteriorated downtown area, and DC had... time of DC's December 31, 1989 determination date, the downtown area in which DC's factory was located...

26 CFR 1.897-2 - United States real property holding corporations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... value of $500,000. DC's only real property interest was a factory that it had occupied for over 50 years, which had a book value of $200,000. The factory was located in a deteriorated downtown area, and DC had... time of DC's December 31, 1989 determination date, the downtown area in which DC's factory was located...

26 CFR 1.897-2 - United States real property holding corporations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... value of $500,000. DC's only real property interest was a factory that it had occupied for over 50 years, which had a book value of $200,000. The factory was located in a deteriorated downtown area, and DC had... time of DC's December 31, 1989 determination date, the downtown area in which DC's factory was located...

Green lumber grade yields from black cherry and red maple factory grade logs sawed at band and circular mills

Treesearch

Daniel A. Yaussy

1989-01-01

Multivariate regression models were developed to predict green board-foot yields (1 board ft. = 2.360 dm 3) for the standard factory lumber grades processed from black cherry (Prunus serotina Ehrh.) and red maple (Acer rubrum L.) factory grade logs sawed at band and circular sawmills. The models use log...

The Physics of the B Factories

DOE PAGES

Bevan, A. J.; Golob, B.; Mannel, Th.; ...

2014-11-19

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.

The Skateboard Factory: Curriculum by Design--Oasis Skateboard Factory Q&A with Craig Morrison

ERIC Educational Resources Information Center

Pearson, George

2012-01-01

Since its opening three years ago, Oasis Skateboard Factory (OSF), founded by teacher Craig Morrison, has attracted considerable media exposure and received a Ken Spencer Award from the CEA for its innovative program. OSF is one of three programs offered by Oasis Alternative Secondary School, one of 22 alternative secondary schools of the Toronto…

Industrial Technology Modernization Program. Project 32. Factory Vision. Phase 2

DTIC Science & Technology

1988-04-01

instructions for the PWA’s, generating the numerical control (NC) program instructions for factory assembly equipment, controlling the process... generating the numerical control (NC) program instructions for factory assembly equipment, controlling the production process instructions and NC... Assembly Operations the "Create Production Process Program" will automatically generate a sequence of graphics pages (in paper mode), or graphics screens

78 FR 29200 - In the Matter of Griffin Mining, Inc., Power Sports Factory, Inc., Star Energy Corp., TransNet...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-17

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of Griffin Mining, Inc., Power Sports Factory, Inc., Star Energy Corp., TransNet Corp., Valcom, Inc., and Vibe Records, Inc.; Order of... information concerning the securities of Power Sports Factory, Inc. because it has not filed any periodic...

Rising Valor: A Research Study of Chinese Women Working in Factories, Educating Themselves and Redefining Women's Empowerment

ERIC Educational Resources Information Center

Newton, Claudia Kristine

2017-01-01

Few empirical studies directly address education among women factory workers in China, much less their sense of agency, power, character and awareness. This dissertation seeks to discover whether among women factory workers in the core manufacturing center, the Yangtze River Delta region of China, educational opportunities and other resources…

Aft segment dome-to-stiffener factory joint insulation void elimination

NASA Technical Reports Server (NTRS)

Jensen, S. K.

1991-01-01

Since the detection of voids in the internal insulation of the dome-to-stiffener factory joint of the 15B aft segment, all aft segment dome-to-stiffener factory joints were x-rated and all were found to contain voids. Using a full-scale process simulation article (PSA), the objective was to demonstrate that the proposed changes in the insulation layup and vacuum bagging processes will greatly reduce or eliminate voids without adversely affecting the configuration of performance of the insulation which serves as a primary seal over the factory joint. The PSA-8 aft segment was insulated and cured using standard production processes.

The 9-item Bergen Burnout Inventory: factorial validity across organizations and measurements of longitudinal data.

PubMed

Feldt, Taru; Rantanen, Johanna; Hyvönen, Katriina; Mäkikangas, Anne; Huhtala, Mari; Pihlajasaari, Pia; Kinnunen, Ulla

2014-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times.

Changes in Eocene-Miocene shallow marine carbonate factories along the tropical SE Circum-Caribbean responded to major regional and global environmental and tectonic events

NASA Astrophysics Data System (ADS)

Silva-Tamayo, Juan Carlos

2015-04-01

Changes in the factory of Cenozoic tropical marine carbonates have been for long attributed to major variations on climatic and environmental conditions. Although important changes on the factories of Cenozoic Caribbean carbonates seem to have followed global climatic and environmental changes, the regional impact of such changes on the factories of shallow marine carbonate along the Caribbean is not well established. Moreover, the influence of transpressional tectonics on the occurrence, distribution and stratigraphy of shallow marine carbonate factories along this area is far from being well understood. Here we report detailed stratigraphic, petrographic and Sr-isotope chemostratigraphic information of several Eocene-Miocene carbonate successions deposited along the equatorial/tropical SE Circum-Caribbean (Colombia and Panama) from which we further assess the influence of changing environmental conditions, transtentional tectonics and sea level change on the development of the shallow marine carbonate factories. Our results suggest that during the Eocene-early Oligocene interval, a period of predominant high atmospheric pCO2, coralline algae constitute the principal carbonate builders of shallow marine carbonate successions along the SE Circum-Caribbean. Detailed stratigraphic and paragenetic analyses suggest the developed of laterally continuous red algae calcareous build-ups along outer-rimmed carbonate platforms. The predominance of coralline red algae over corals on the shallow marine carbonate factories was likely related to high sea surface temperatures and high turbidity. The occurrence of such build-ups was likely controlled by pronounce changes in the basin paleotopography, i.e. the occurrence of basement highs and lows, resulting from local transpressional tectonics. The occurrence of these calcareous red algae dominated factories was also controlled by diachronic opening of different sedimentary basins along the SE Circum Caribbean resulting from transpressional tectonics. Calcareous algae persisted as the main constituents of the shallow marine carbonate factories until the middle Oligocene; a period when atmospheric pCO2 dropped significantly. The drop in atmospheric pCO2 allowed the onset of global icehouse conditions, which likely resulted in a decrease in sea surface temperatures along the Caribbean. This drop allowed the appearance of corals as the main constituents of the shallow marine carbonate factories along the SE Circum-Caribbean by late Oligocene times.

Nitrogen fertilizer factory effects on the amino acid and nitrogen content in the needles of Scots pine.

PubMed

Kupsinskiene, E

2001-12-04

The aim of the research was to evaluate the content of amino acids in the needles of Pinus sylvestris growing in the area affected by a nitrogen fertilizer factory and to compare them with other parameters of needles, trees, and sites. Three young-age stands of Scots pine were selected at a distance of 0.5 km, 5 km, and 17 km from the factory. Examination of the current-year needles in winter of the year 2000 revealed significant (p < 0.05) differences between the site at a 0.5-km distance from the factory and the site at a 17-km distance from the factory--with the site closest to the factory showing the highest concentrations of protein (119%), total arginine (166%), total other amino acids (depending on amino acid, the effect ranged between 119 and 149%), free arginine (771%), other free amino acids (glutamic acid, threonine, serine, lysine--depending on amino acid, the effect ranged between 162 and 234%), also the longest needles, widest diameter, largest surface area, and heaviest dry weight (respectively, 133, 110, 136, and 169%). The gradient of nitrogen concentration in the needles was assessed on the selected plots over the period of 1995-2000, with the highest concentration (depending on year, 119 to 153%) documented in the site located 0.5 km from the factory. Significant correlations were determined between the total amino acid contents (r = 0.448 -0.939, p < 0.05), some free amino acid (arginine, aspartic acid, glutamic acid, lysine, threonine, and serine) contents (r = 0.418 - 0.975, p < 0.05), and air pollutant concentration at the sites, the distance between the sites and the factory, and characteristics of the needles. No correlation was found between free or total arginine content and defoliation or retention of the needles. In conclusion, it was revealed that elevated mean monthly concentration of ammonia (26 microg m(-3)) near the nitrogen fertilizer factory caused changes in nitrogen metabolism, especially increasing (nearly eight times) concentration of free arginine in the needles of Scots pine.

Divergent response of the neritic carbonate factory to environmental changes during the Early Bajocian Event

NASA Astrophysics Data System (ADS)

Bodin, Stephane; Hönig, Martin; Krencker, Francois-Nicolas; Danisch, Jan; Kabiri, Lahcen

2017-04-01

The Early Bajocian witnessed a global environmental perturbation, characterized by faunal and floral turnovers and a positive carbon isotope excursion. In Italy, this environmental perturbation coincided with an eutrophication event and a carbonate crisis, but this has so far not been adequately reported from other settings, leaving doubt about the extent and nature of these phenomena. Here, we are reporting on an extensive neritic carbonate factory demise that occurs in the upper Lower Bajocian of the Central High Atlas of Morocco, more precisely in the upper Propinquans - lower Humphriesianum Zones. This demise coincided with the acme of the global carbon isotope perturbation, recorded by a 3‰ positive carbon isotope excursion in the bulk organic matter of Morocco. Recovery of the neritic carbonate system occurs during the Early to Late Bajocian transition. The duration of the neritic carbonate factory demise was therefore in the order of 1 Myr. Furthermore, we observe that the Lower Bajocian of Morocco is relatively enriched in arenitic siliciclastic deposits, suggesting increased weathering and nutrient levels along the northwestern margin of Africa during the Early Bajocian. However, comparison with neighboring European basins highlights the non-uniqueness and different timing of the response of shallow-water carbonates to the Early Bajocian environmental perturbations, as some regions present no sign of carbonate factory crisis. Hence, we postulate that local factors were important in mediating the response of neritic carbonate factories to this global environmental perturbation. We notably highlight the role of large Early Bajocian sea-level fluctuation as a trigger for carbonate factory change and demise in Morocco. Indeed, in the Central High Atlas Basin, transgressive intervals are seeing the development of a mud-dominated carbonate factory whereas regressive intervals are associated with grain-dominated carbonate factory. We speculate that the combination of high subsidence rates in the Central High Atlas Basin with large eustatic sea-level rise and high nutrient levels during the Early Bajocian stressed the mud-dominated benthic carbonate factory beyond a critical threshold, explaining the regional demise event.

Impact of a private sector living wage intervention on depressive symptoms among apparel workers in the Dominican Republic: a quasi-experimental study.

PubMed

Burmaster, Katharine B; Landefeld, John C; Rehkopf, David H; Lahiff, Maureen; Sokal-Gutierrez, Karen; Adler-Milstein, Sarah; Fernald, Lia C H

2015-08-03

Poverty reduction interventions through cash transfers and microcredit have had mixed effects on mental health. In this quasi-experimental study, we evaluate the effect of a living wage intervention on depressive symptoms of apparel factory workers in the Dominican Republic. Two apparel factories in the Dominican Republic. The final sample consisted of 204 hourly wage workers from the intervention (99) and comparison (105) factories. In 2010, an apparel factory began a living wage intervention including a 350% wage increase and significant workplace improvements. The wage increase was plausibly exogenous because workers were not aware of the living wage when applying for jobs and expected to be paid the usual minimum wage. These individuals were compared with workers at a similar local factory paying minimum wage, 15-16 months postintervention. Workers' depressive symptoms were assessed using the Center for Epidemiologic Studies-Depression Scale (CES-D). Ordinary least squares and Poisson regressions were used to evaluate treatment effect of the intervention, adjusted for covariates. Intervention factory workers had fewer depressive symptoms than comparison factory workers (unadjusted mean CES-D scores: 10.6 ± 9.3 vs 14.7 ± 11.6, p = 0.007). These results were sustained when controlling for covariates (β = -5.4, 95% CI -8.5 to -2.3, p = 0.001). In adjusted analyses using the standard CES-D clinical cut-off of 16, workers at the intervention factory had a 47% reduced risk of clinically significant levels of depressive symptoms compared with workers at the comparison factory (23% vs 40%). Policymakers have long grappled with how best to improve mental health among populations in low-income and middle-income countries. We find that providing a living wage and workplace improvements to improve income and well-being in a disadvantaged population is associated with reduced depressive symptoms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Life cycle inventory for palm based plywood: A gate-to-gate case study

NASA Astrophysics Data System (ADS)

Ahmad, Shamim; Sahid, Ismail; Subramaniam, Vijaya; Muhamad, Halimah; Mokhtar, Anis

2013-11-01

The oil palm industry heavily relies on the world market. It is essential to ensure that the oil palm industry is ready to meet the demands and expectation of these overseas customers on the environmental performance of the oil palm industry. Malaysia produces 13.9 million tons of oil palm biomass including oil palm trunk (OPT), frond and empty fruits bunches (EFB) annually. OPT felled in some oil palm plantations during replanting is transported to various industries and one such industry is the plywood factories. In order to gauge the environmental performance of the use of OPT as plywood a Life Cycle Assessment (LCA) study was conducted for palm based plywood. LCA is an important tool to assess the environmental performance of a product or process. Life cycle inventory (LCI) is the heart of a LCA study. This LCI study has a gate-to-gate system boundary and the functional unit is 1 m3 palm plywood produced and covers three types of plywood; Moisture Resistance Plywood (MR), Weather Boiling Proof Plywood Grade 1 (WBP Grade 1) at Factory D and Weather Boiling Proof Plywood Grade 2 (WBP Grade 2) at Factory E. Both factories use two different types of drying processes; conventional drying at Factory D and kiln drying at Factory E. This inventory data was collected from two factories (D and E) representing 40% of Malaysia palm plywood industry. The inputs are mainly the raw materials which are the oil palm trunks and tropical wood veneers and the energy from diesel and electricity from grid which is mainly used for the drying process. The other inputs include water, urea formaldehyde, phenol formaldehyde, flour and melamine powder. The outputs are the biomass waste which consists of oil palm trunk off-cut and emission from boiler. Generally, all types of plywood production use almost same materials and processing methods in different quantities. Due to the different process efficiency, Factory D uses less input of raw materials and energy compared to Factory E.

Construction of Escherichia Coli Cell Factories for Production of Organic Acids and Alcohols.

PubMed

Liu, Pingping; Zhu, Xinna; Tan, Zaigao; Zhang, Xueli; Ma, Yanhe

2016-01-01

Production of bulk chemicals from renewable biomass has been proved to be sustainable and environmentally friendly. Escherichia coli is the most commonly used host strain for constructing cell factories for production of bulk chemicals since it has clear physiological and genetic characteristics, grows fast in minimal salts medium, uses a wide range of substrates, and can be genetically modified easily. With the development of metabolic engineering, systems biology, and synthetic biology, a technology platform has been established to construct E. coli cell factories for bulk chemicals production. In this chapter, we will introduce this technology platform, as well as E. coli cell factories successfully constructed for production of organic acids and alcohols.

Production of fatty acid-derived oleochemicals and biofuels by synthetic yeast cell factories

PubMed Central

Zhou, Yongjin J.; Buijs, Nicolaas A.; Zhu, Zhiwei; Qin, Jiufu; Siewers, Verena; Nielsen, Jens

2016-01-01

Sustainable production of oleochemicals requires establishment of cell factory platform strains. The yeast Saccharomyces cerevisiae is an attractive cell factory as new strains can be rapidly implemented into existing infrastructures such as bioethanol production plants. Here we show high-level production of free fatty acids (FFAs) in a yeast cell factory, and the production of alkanes and fatty alcohols from its descendants. The engineered strain produces up to 10.4 g l−1 of FFAs, which is the highest reported titre to date. Furthermore, through screening of specific pathway enzymes, endogenous alcohol dehydrogenases and aldehyde reductases, we reconstruct efficient pathways for conversion of fatty acids to alkanes (0.8 mg l−1) and fatty alcohols (1.5 g l−1), to our knowledge the highest titres reported in S. cerevisiae. This should facilitate the construction of yeast cell factories for production of fatty acids derived products and even aldehyde-derived chemicals of high value. PMID:27222209

It Cuts Both Ways: Workers, Management and the Construction of a "Community of Fate" on the Shop Floor in a Mexican Garment Factory

ERIC Educational Resources Information Center

Videla, Nancy Plankey

2006-01-01

Most studies of lean production are based on surveys of managers. This article examines the labor process under lean production at a high-end garment factory in Central Mexico through ethnographic research, consisting of nine months of work at the factory, and in-depth interviews with 25 managers and 26 workers. The author found that…

West europe Report, Science and Technology.

DTIC Science & Technology

1986-04-15

BLICK DURCH DIE WIRTSCHAFT, 21 Feb 86) 38 Seiaf: Elsag /lBM’s New Creation in Factory Automation (Mauro Flego Interview; AUTOMAZIONE INTEGRATA...SEIAF: ELSAG /IBM’S NEW CREATION IN FACTORY AUTOMATION Milan AUTOMAZIONE INTEGRATA in Italian Apr 85 pp 110-112 [Interview with Mauro Flego...objectives of SEIAF? [Answer] SEIAF, or better—the joint venture ELSAG /IBM—concerns itself with electronic and computer systems for factory automation

Virus-host interactions: insights from the replication cycle of the large Paramecium bursaria chlorella virus.

PubMed

Milrot, Elad; Mutsafi, Yael; Fridmann-Sirkis, Yael; Shimoni, Eyal; Rechav, Katya; Gurnon, James R; Van Etten, James L; Minsky, Abraham

2016-01-01

The increasing interest in cytoplasmic factories generated by eukaryotic-infecting viruses stems from the realization that these highly ordered assemblies may contribute fundamental novel insights to the functional significance of order in cellular biology. Here, we report the formation process and structural features of the cytoplasmic factories of the large dsDNA virus Paramecium bursaria chlorella virus 1 (PBCV-1). By combining diverse imaging techniques, including scanning transmission electron microscopy tomography and focused ion beam technologies, we show that the architecture and mode of formation of PBCV-1 factories are significantly different from those generated by their evolutionary relatives Vaccinia and Mimivirus. Specifically, PBCV-1 factories consist of a network of single membrane bilayers acting as capsid templates in the central region, and viral genomes spread throughout the host cytoplasm but excluded from the membrane-containing sites. In sharp contrast, factories generated by Mimivirus have viral genomes in their core, with membrane biogenesis region located at their periphery. Yet, all viral factories appear to share structural features that are essential for their function. In addition, our studies support the notion that PBCV-1 infection, which was recently reported to result in significant pathological outcomes in humans and mice, proceeds through a bacteriophage-like infection pathway. © 2015 John Wiley & Sons Ltd.

New generation electron-positron factories

NASA Astrophysics Data System (ADS)

Zobov, Mikhail

2011-09-01

In 2010 we celebrate 50 years since commissioning of the first particle storage ring ADA in Frascati (Italy) that also became the first electron-positron collider in 1964. After that date the particle colliders have increased their intensity, luminosity and energy by several orders of magnitude. Namely, because of the high stored beam currents and high rate of useful physics events (luminosity) the modern electron-positron colliders are called "factories". However, the fundamental physics has required luminosities by 1-2 orders of magnitudes higher with respect to those presently achieved. This task can be accomplished by designing a new generation of factories exploiting the potential of a new collision scheme based on the Crab Waist (CW) collision concept recently proposed and successfully tested at Frascati. In this paper we discuss the performance and limitations of the present generation electron-positron factories and give a brief overview of new ideas and collision schemes proposed for further collider luminosity increase. In more detail we describe the CW collision concept and the results of the crab waist collision tests in DAϕNE, the Italian ϕ-factory. Finally, we briefly describe most advanced projects of the next generation factories based on the CW concept: SuperB in Italy, SuperKEKB in Japan and SuperC-Tau in Russia.

The 9-item Bergen Burnout Inventory: Factorial Validity Across Organizations and Measurements of Longitudinal Data

PubMed Central

Feldt, Taru; RANTANEN, Johanna; HYVÖNEN, Katriina; MÄKIKANGAS, Anne; HUHTALA, Mari; PIHLAJASAARI, Pia; KINNUNEN, Ulla

2013-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9)1). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times. PMID:24366535

River pollution remediation monitored by optical and infrared high-resolution satellite images.

PubMed

Trivero, Paolo; Borasi, Maria; Biamino, Walter; Cavagnero, Marco; Rinaudo, Caterina; Bonansea, Matias; Lanfri, Sofia

2013-09-01

The Bormida River Basin, located in the northwestern region of Italy, has been strongly contaminated by the ACNA chemical factory. This factory was in operation from 1892 to 1998, and contamination from the factory has had deleterious consequences on the water quality, agriculture, natural ecosystems and human health. Attempts have been made to remediate the site. The aims of this study were to use high-resolution satellite images combined with a classical remote sensing methodology to monitor vegetation conditions along the Bormida River, both upstream and downstream of the ACNA chemical factory site, and to compare the results obtained at different times before and after the remediation process. The trends of the Normalised Difference Vegetation Index (NDVI) and the Enhanced Vegetation Index (EVI) along the riverbanks are used to assess the effect of water pollution on vegetation. NDVI and EVI values show that the contamination produced by the ACNA factory had less severe effects in the year 2007, when most of the remediation activities were concluded, than in 2006 and 2003. In 2007, the contamination effects were noticeable up to 6 km downstream of the factory, whereas in 2003 and 2006 the influence range was up to about 12 km downstream of the factory. The results of this study show the effectiveness of remediation activities that have been taking place in this area. In addition, the comparison between NDVI and EVI shows that the EVI is more suitable to characterise the vegetation health and can be considered an additional tool to assess vegetation health and to monitor restoration activities.

Promoting contraceptive use among unmarried female migrants in one factory in Shanghai: a pilot workplace intervention.

PubMed

Qian, Xu; Smith, Helen; Huang, Wenyuan; Zhang, Jie; Huang, Ying; Garner, Paul

2007-05-31

In urban China, more single women are becoming pregnant and resorting to induced abortion, despite the wide availability of temporary methods of contraception. We developed and piloted a workplace-based intervention to promote contraceptive use in unmarried female migrants working in privately owned factories. Quasi-experimental design. In consultation with clients, we developed a workplace based intervention to promote contraception use in unmarried female migrants in a privately owned factory. We then implemented this in one factory, using a controlled before-and-after design. The intervention included lectures, bespoke information leaflets, and support to the factory doctors in providing a contraceptive service. 598 women participated: most were under 25, migrants to the city, with high school education. Twenty percent were lost when staff were made redundant, and implementation was logistically complicated. All women attended the initial lecture, and just over half the second lecture. Most reported reading the educational material provided (73%), but very few women reported using the free family planning services offered at the factory clinic (5%) or the Family Planning Institute (3%). At baseline, 90% (N = 539) stated that contraceptives were required if having sex before marriage; of those reporting sex in the last three months, the majority reporting using contraceptives (78%, 62/79) but condom use was low (44%, 35/79). Qualitative data showed that the reading material seemed to be popular and young women expressed a need for more specific reproductive health information, particularly on HIV/AIDS. Women wanted services with some privacy and anonymity, and views on the factory service were mixed. Implementing a complex intervention with a hard to reach population through a factory in China, using a quasi-experimental design, is not easy. Further research should focus on the specific needs and service preferences of this population and these should be considered in any policy reform so that contraceptive use may be encouraged among young urban migrant workers.

Microbially induced and microbially catalysed precipitation: two different carbonate factories

NASA Astrophysics Data System (ADS)

Meister, Patrick

2016-04-01

The landmark paper by Schlager (2003) has revealed three types of benthic carbonate production referred to as "carbonate factories", operative at different locations at different times in Earth history. The tropical or T-factory comprises the classical platforms and fringing reefs and is dominated by carbonate precipitation by autotrophic calcifying metazoans ("biotically controlled" precipitation). The cool or C-factory is also biotically controlled but via heterotrophic, calcifying metazoans in cold and deep waters at the continental margins. A further type is the mud-mound or M-factory, where carbonate precipitation is supported by microorganisms but not controlled by a specific enzymatic pathway ("biotically induced" precipitation). How exactly the microbes influence precipitation is still poorly understood. Based on recent experimental and field studies, the microbial influence on modern mud mound and microbialite growth includes two fundamentally different processes: (1) Metabolic activity of microbes may increase the saturation state with respect to a particular mineral phase, thereby indirectly driving the precipitation of the mineral phase: microbially induced precipitation. (2) In a situation, where a solution is already supersaturated but precipitation of the mineral is inhibited by a kinetic barrier, microbes may act as a catalyser, i.e. they lower the kinetic barrier: microbially catalysed precipitation. Such a catalytic effect can occur e.g. via secreted polymeric substances or specific chemical groups on the cell surface, at which the minerals nucleate or which facilitate mechanistically the bonding of new ions to the mineral surface. Based on these latest developments in microbialite formation, I propose to extend the scheme of benthic carbonate factories of Schlager et al. (2003) by introducing an additional branch distinguishing microbially induced from microbially catalysed precipitation. Although both mechanisms could be operative in a M-factory, and it is difficult to distinguish their products, their cause is very different. A Mi-factory ("i" for induced) is predominant under low carbonate saturation in normal seawater; a Mc-factory ("c" for catalysed) is operative in higher-alkalinity waters. The latter conditions may not only occur in shallow seas restricted from open sea water but may also have occurred in the aftermath of catastrophic events (e.g. P/T boundary) or during the Precambrian, before the onset of metazoan calcifiers. Thus, adding the additional distinction between microbially induced and microbially catalysed precipitation would allow the application of Schlager's concept of benthic carbonate factories beyond the Phanerozoic and probably over the entire Earth history.

Scrambled Sobol Sequences via Permutation

DTIC Science & Technology

2009-01-01

LCG LCG64 LFG MLFG PMLCG Sobol Scrambler PermutationScrambler LinearScrambler <<uses>> PermuationFactory StaticFactory DynamicFactory <<uses>> Figure 3...Phy., 19:252–256, 1979. [2] Emanouil I. Atanassov. A new efficient algorithm for generating the scrambled sobol ’ sequence. In NMA ’02: Revised Papers...Deidre W.Evan, and Micheal Mascagni. On the scrambled sobol sequence. In ICCS2005, pages 775–782, 2005. [7] Richard Durstenfeld. Algorithm 235: Random

The Physics of the B Factories

NASA Astrophysics Data System (ADS)

Bevan, A. J.; Golob, B.; Mannel, Th.; Prell, S.; Yabsley, B. D.; Aihara, H.; Anulli, F.; Arnaud, N.; Aushev, T.; Beneke, M.; Beringer, J.; Bianchi, F.; Bigi, I. I.; Bona, M.; Brambilla, N.; Brodzicka, J.; Chang, P.; Charles, M. J.; Cheng, C. H.; Cheng, H.-Y.; Chistov, R.; Colangelo, P.; Coleman, J. P.; Drutskoy, A.; Druzhinin, V. P.; Eidelman, S.; Eigen, G.; Eisner, A. M.; Faccini, R.; Flood, K. T.; Gambino, P.; Gaz, A.; Gradl, W.; Hayashii, H.; Higuchi, T.; Hulsbergen, W. D.; Hurth, T.; Iijima, T.; Itoh, R.; Jackson, P. D.; Kass, R.; Kolomensky, Yu. G.; Kou, E.; Križan, P.; Kronfeld, A.; Kumano, S.; Kwon, Y. J.; Latham, T. E.; Leith, D. W. G. S.; Lüth, V.; Martinez-Vidal, F.; Meadows, B. T.; Mussa, R.; Nakao, M.; Nishida, S.; Ocariz, J.; Olsen, S. L.; Pakhlov, P.; Pakhlova, G.; Palano, A.; Pich, A.; Playfer, S.; Poluektov, A.; Porter, F. C.; Robertson, S. H.; Roney, J. M.; Roodman, A.; Sakai, Y.; Schwanda, C.; Schwartz, A. J.; Seidl, R.; Sekula, S. J.; Steinhauser, M.; Sumisawa, K.; Swanson, E. S.; Tackmann, F.; Trabelsi, K.; Uehara, S.; Uno, S.; van de Water, R.; Vasseur, G.; Verkerke, W.; Waldi, R.; Wang, M. Z.; Wilson, F. F.; Zupan, J.; Zupanc, A.; Adachi, I.; Albert, J.; Banerjee, Sw.; Bellis, M.; Ben-Haim, E.; Biassoni, P.; Cahn, R. N.; Cartaro, C.; Chauveau, J.; Chen, C.; Chiang, C. C.; Cowan, R.; Dalseno, J.; Davier, M.; Davies, C.; Dingfelder, J. C.; Echenard, B.; Epifanov, D.; Fulsom, B. G.; Gabareen, A. M.; Gary, J. W.; Godang, R.; Graham, M. T.; Hafner, A.; Hamilton, B.; Hartmann, T.; Hayasaka, K.; Hearty, C.; Iwasaki, Y.; Khodjamirian, A.; Kusaka, A.; Kuzmin, A.; Lafferty, G. D.; Lazzaro, A.; Li, J.; Lindemann, D.; Long, O.; Lusiani, A.; Marchiori, G.; Martinelli, M.; Miyabayashi, K.; Mizuk, R.; Mohanty, G. B.; Muller, D. R.; Nakazawa, H.; Ongmongkolkul, P.; Pacetti, S.; Palombo, F.; Pedlar, T. K.; Piilonen, L. E.; Pilloni, A.; Poireau, V.; Prothmann, K.; Pulliam, T.; Rama, M.; Ratcliff, B. N.; Roudeau, P.; Schrenk, S.; Schroeder, T.; Schubert, K. R.; Shen, C. P.; Shwartz, B.; Soffer, A.; Solodov, E. P.; Somov, A.; Starič, M.; Stracka, S.; Telnov, A. V.; Todyshev, K. Yu.; Tsuboyama, T.; Uglov, T.; Vinokurova, A.; Walsh, J. J.; Watanabe, Y.; Won, E.; Wormser, G.; Wright, D. H.; Ye, S.; Zhang, C. C.; Abachi, S.; Abashian, A.; Abe, K.; Abe, N.; Abe, R.; Abe, T.; Abrams, G. S.; Adam, I.; Adamczyk, K.; Adametz, A.; Adye, T.; Agarwal, A.; Ahmed, H.; Ahmed, M.; Ahmed, S.; Ahn, B. S.; Ahn, H. S.; Aitchison, I. J. R.; Akai, K.; Akar, S.; Akatsu, M.; Akemoto, M.; Akhmetshin, R.; Akre, R.; Alam, M. S.; Albert, J. N.; Aleksan, R.; Alexander, J. P.; Alimonti, G.; Allen, M. T.; Allison, J.; Allmendinger, T.; Alsmiller, J. R. G.; Altenburg, D.; Alwyn, K. E.; An, Q.; Anderson, J.; Andreassen, R.; Andreotti, D.; Andreotti, M.; Andress, J. C.; Angelini, C.; Anipko, D.; Anjomshoaa, A.; Anthony, P. L.; Antillon, E. A.; Antonioli, E.; Aoki, K.; Arguin, J. F.; Arinstein, K.; Arisaka, K.; Asai, K.; Asai, M.; Asano, Y.; Asgeirsson, D. J.; Asner, D. M.; Aso, T.; Aspinwall, M. L.; Aston, D.; Atmacan, H.; Aubert, B.; Aulchenko, V.; Ayad, R.; Azemoon, T.; Aziz, T.; Azzolini, V.; Azzopardi, D. E.; Baak, M. A.; Back, J. J.; Bagnasco, S.; Bahinipati, S.; Bailey, D. S.; Bailey, S.; Bailly, P.; van Bakel, N.; Bakich, A. M.; Bala, A.; Balagura, V.; Baldini-Ferroli, R.; Ban, Y.; Banas, E.; Band, H. R.; Banerjee, S.; Baracchini, E.; Barate, R.; Barberio, E.; Barbero, M.; Bard, D. J.; Barillari, T.; Barlow, N. R.; Barlow, R. J.; Barrett, M.; Bartel, W.; Bartelt, J.; Bartoldus, R.; Batignani, G.; Battaglia, M.; Bauer, J. M.; Bay, A.; Beaulieu, M.; Bechtle, P.; Beck, T. W.; Becker, J.; Becla, J.; Bedny, I.; Behari, S.; Behera, P. K.; Behn, E.; Behr, L.; Beigbeder, C.; Beiline, D.; Bell, R.; Bellini, F.; Bellodi, G.; Belous, K.; Benayoun, M.; Benelli, G.; Benitez, J. F.; Benkebil, M.; Berger, N.; Bernabeu, J.; Bernard, D.; Bernet, R.; Bernlochner, F. U.; Berryhill, J. W.; Bertsche, K.; Besson, P.; Best, D. S.; Bettarini, S.; Bettoni, D.; Bhardwaj, V.; Bhimji, W.; Bhuyan, B.; Biagini, M. E.; Biasini, M.; van Bibber, K.; Biesiada, J.; Bingham, I.; Bionta, R. M.; Bischofberger, M.; Bitenc, U.; Bizjak, I.; Blanc, F.; Blaylock, G.; Blinov, V. E.; Bloom, E.; Bloom, P. C.; Blount, N. L.; Blouw, J.; Bly, M.; Blyth, S.; Boeheim, C. T.; Bomben, M.; Bondar, A.; Bondioli, M.; Bonneaud, G. R.; Bonvicini, G.; Booke, M.; Booth, J.; Borean, C.; Borgland, A. W.; Borsato, E.; Bosi, F.; Bosisio, L.; Botov, A. A.; Bougher, J.; Bouldin, K.; Bourgeois, P.; Boutigny, D.; Bowerman, D. A.; Boyarski, A. M.; Boyce, R. F.; Boyd, J. T.; Bozek, A.; Bozzi, C.; Bračko, M.; Brandenburg, G.; Brandt, T.; Brau, B.; Brau, J.; Breon, A. B.; Breton, D.; Brew, C.; Briand, H.; Bright-Thomas, P. G.; Brigljević, V.; Britton, D. I.; Brochard, F.; Broomer, B.; Brose, J.; Browder, T. E.; Brown, C. L.; Brown, C. M.; Brown, D. N.; Browne, M.; Bruinsma, M.; Brunet, S.; Bucci, F.; Buchanan, C.; Buchmueller, O. L.; Bünger, C.; Bugg, W.; Bukin, A. D.; Bula, R.; Bulten, H.; Burchat, P. R.; Burgess, W.; Burke, J. P.; Button-Shafer, J.; Buzykaev, A. R.; Buzzo, A.; Cai, Y.; Calabrese, R.; Calcaterra, A.; Calderini, G.; Camanzi, B.; Campagna, E.; Campagnari, C.; Capra, R.; Carassiti, V.; Carpinelli, M.; Carroll, M.; Casarosa, G.; Casey, B. C. K.; Cason, N. M.; Castelli, G.; Cavallo, N.; Cavoto, G.; Cecchi, A.; Cenci, R.; Cerizza, G.; Cervelli, A.; Ceseracciu, A.; Chai, X.; Chaisanguanthum, K. S.; Chang, M. C.; Chang, Y. H.; Chang, Y. W.; Chao, D. S.; Chao, M.; Chao, Y.; Charles, E.; Chavez, C. A.; Cheaib, R.; Chekelian, V.; Chen, A.; Chen, E.; Chen, G. P.; Chen, H. F.; Chen, J.-H.; Chen, J. C.; Chen, K. F.; Chen, P.; Chen, S.; Chen, W. T.; Chen, X.; Chen, X. R.; Chen, Y. Q.; Cheng, B.; Cheon, B. G.; Chevalier, N.; Chia, Y. M.; Chidzik, S.; Chilikin, K.; Chistiakova, M. V.; Cizeron, R.; Cho, I. S.; Cho, K.; Chobanova, V.; Choi, H. H. F.; Choi, K. S.; Choi, S. K.; Choi, Y.; Choi, Y. K.; Christ, S.; Chu, P. H.; Chun, S.; Chuvikov, A.; Cibinetto, G.; Cinabro, D.; Clark, A. R.; Clark, P. J.; Clarke, C. K.; Claus, R.; Claxton, B.; Clifton, Z. C.; Cochran, J.; Cohen-Tanugi, J.; Cohn, H.; Colberg, T.; Cole, S.; Colecchia, F.; Condurache, C.; Contri, R.; Convert, P.; Convery, M. R.; Cooke, P.; Copty, N.; Cormack, C. M.; Dal Corso, F.; Corwin, L. A.; Cossutti, F.; Cote, D.; Cotta Ramusino, A.; Cottingham, W. N.; Couderc, F.; Coupal, D. P.; Covarelli, R.; Cowan, G.; Craddock, W. W.; Crane, G.; Crawley, H. B.; Cremaldi, L.; Crescente, A.; Cristinziani, M.; Crnkovic, J.; Crosetti, G.; Cuhadar-Donszelmann, T.; Cunha, A.; Curry, S.; D'Orazio, A.; Dû, S.; Dahlinger, G.; Dahmes, B.; Dallapiccola, C.; Danielson, N.; Danilov, M.; Das, A.; Dash, M.; Dasu, S.; Datta, M.; Daudo, F.; Dauncey, P. D.; David, P.; Davis, C. L.; Day, C. T.; De Mori, F.; De Domenico, G.; De Groot, N.; De la Vaissière, C.; de la Vaissière, Ch.; de Lesquen, A.; De Nardo, G.; de Sangro, R.; De Silva, A.; DeBarger, S.; Decker, F. J.; del Amo Sanchez, P.; Del Buono, L.; Del Gamba, V.; del Re, D.; Della Ricca, G.; Denig, A. G.; Derkach, D.; Derrington, I. M.; DeStaebler, H.; Destree, J.; Devmal, S.; Dey, B.; Di Girolamo, B.; Marco, E. Di; Dickopp, M.; Dima, M. O.; Dittrich, S.; Dittongo, S.; Dixon, P.; Dneprovsky, L.; Dohou, F.; Doi, Y.; Doležal, Z.; Doll, D. A.; Donald, M.; Dong, L.; Dong, L. Y.; Dorfan, J.; Dorigo, A.; Dorsten, M. P.; Dowd, R.; Dowdell, J.; Drásal, Z.; Dragic, J.; Drummond, B. W.; Dubitzky, R. S.; Dubois-Felsmann, G. P.; Dubrovin, M. S.; Duh, Y. C.; Duh, Y. T.; Dujmic, D.; Dungel, W.; Dunwoodie, W.; Dutta, D.; Dvoretskii, A.; Dyce, N.; Ebert, M.; Eckhart, E. A.; Ecklund, S.; Eckmann, R.; Eckstein, P.; Edgar, C. L.; Edwards, A. J.; Egede, U.; Eichenbaum, A. M.; Elmer, P.; Emery, S.; Enari, Y.; Enomoto, R.; Erdos, E.; Erickson, R.; Ernst, J. A.; Erwin, R. J.; Escalier, M.; Eschenburg, V.; Eschrich, I.; Esen, S.; Esteve, L.; Evangelisti, F.; Everton, C. W.; Eyges, V.; Fabby, C.; Fabozzi, F.; Fahey, S.; Falbo, M.; Fan, S.; Fang, F.; Fanin, C.; Farbin, A.; Farhat, H.; Fast, J. E.; Feindt, M.; Fella, A.; Feltresi, E.; Ferber, T.; Fernholz, R. E.; Ferrag, S.; Ferrarotto, F.; Ferroni, F.; Field, R. C.; Filippi, A.; Finocchiaro, G.; Fioravanti, E.; Firmino da Costa, J.; Fischer, P.-A.; Fisher, A. S.; Fisher, P. H.; Flacco, C. J.; Flack, R. L.; Flaecher, H. U.; Flanagan, J.; Flanigan, J. M.; Ford, K. E.; Ford, W. T.; Forster, I. J.; Forti, A. C.; Forti, F.; Fortin, D.; Foster, B.; Foulkes, S. D.; Fouque, G.; Fox, J.; Franchini, P.; Franco Sevilla, M.; Franek, B.; Frank, E. D.; Fransham, K. B.; Fratina, S.; Fratini, K.; Frey, A.; Frey, R.; Friedl, M.; Fritsch, M.; Fry, J. R.; Fujii, H.; Fujikawa, M.; Fujita, Y.; Fujiyama, Y.; Fukunaga, C.; Fukushima, M.; Fullwood, J.; Funahashi, Y.; Funakoshi, Y.; Furano, F.; Furman, M.; Furukawa, K.; Futterschneider, H.; Gabathuler, E.; Gabriel, T. A.; Gabyshev, N.; Gaede, F.; Gagliardi, N.; Gaidot, A.; Gaillard, J.-M.; Gaillard, J. R.; Galagedera, S.; Galeazzi, F.; Gallo, F.; Gamba, D.; Gamet, R.; Gan, K. K.; Gandini, P.; Ganguly, S.; Ganzhur, S. F.; Gao, Y. Y.; Gaponenko, I.; Garmash, A.; Garra Tico, J.; Garzia, I.; Gaspero, M.; Gastaldi, F.; Gatto, C.; Gaur, V.; Geddes, N. I.; Geld, T. L.; Genat, J.-F.; George, K. A.; George, M.; George, S.; Georgette, Z.; Gershon, T. J.; Gill, M. S.; Gillard, R.; Gilman, J. D.; Giordano, F.; Giorgi, M. A.; Giraud, P.-F.; Gladney, L.; Glanzman, T.; Glattauer, R.; Go, A.; Goetzen, K.; Goh, Y. M.; Gokhroo, G.; Goldenzweig, P.; Golubev, V. B.; Gopal, G. P.; Gordon, A.; Gorišek, A.; Goriletsky, V. I.; Gorodeisky, R.; Gosset, L.; Gotow, K.; Gowdy, S. J.; Graffin, P.; Grancagnolo, S.; Grauges, E.; Graziani, G.; Green, M. G.; Greene, M. G.; Grenier, G. J.; Grenier, P.; Griessinger, K.; Grillo, A. A.; Grinyov, B. V.; Gritsan, A. V.; Grosdidier, G.; Grosse Perdekamp, M.; Grosso, P.; Grothe, M.; Groysman, Y.; Grünberg, O.; Guido, E.; Guler, H.; Gunawardane, N. J. W.; Guo, Q. H.; Guo, R. S.; Guo, Z. J.; Guttman, N.; Ha, H.; Ha, H. C.; Haas, T.; Haba, J.; Hachtel, J.; Hadavand, H. K.; Hadig, T.; Hagner, C.; Haire, M.; Haitani, F.; Haji, T.; Haller, G.; Halyo, V.; Hamano, K.; Hamasaki, H.; Hamel de Monchenault, G.; Hamilton, J.; Hamilton, R.; Hamon, O.; Han, B. Y.; Han, Y. L.; Hanada, H.; Hanagaki, K.; Handa, F.; Hanson, J. E.; Hanushevsky, A.; Hara, K.; Hara, T.; Harada, Y.; Harrison, P. F.; Harrison, T. J.; Harrop, B.; Hart, A. J.; Hart, P. A.; Hartfiel, B. L.; Harton, J. L.; Haruyama, T.; Hasan, A.; Hasegawa, Y.; Hast, C.; Hastings, N. C.; Hasuko, K.; Hauke, A.; Hawkes, C. M.; Hayashi, K.; Hazumi, M.; Hee, C.; Heenan, E. M.; Heffernan, D.; Held, T.; Henderson, R.; Henderson, S. W.; Hertzbach, S. S.; Hervé, S.; Heß, M.; Heusch, C. A.; Hicheur, A.; Higashi, Y.; Higasino, Y.; Higuchi, I.; Hikita, S.; Hill, E. J.; Himel, T.; Hinz, L.; Hirai, T.; Hirano, H.; Hirschauer, J. F.; Hitlin, D. G.; Hitomi, N.; Hodgkinson, M. C.; Höcker, A.; Hoi, C. T.; Hojo, T.; Hokuue, T.; Hollar, J. J.; Hong, T. M.; Honscheid, K.; Hooberman, B.; Hopkins, D. A.; Horii, Y.; Hoshi, Y.; Hoshina, K.; Hou, S.; Hou, W. S.; Hryn'ova, T.; Hsiung, Y. B.; Hsu, C. L.; Hsu, S. C.; Hu, H.; Hu, T.; Huang, H. C.; Huang, T. J.; Huang, Y. C.; Huard, Z.; Huffer, M. E.; Hufnagel, D.; Hung, T.; Hutchcroft, D. E.; Hyun, H. J.; Ichizawa, S.; Igaki, T.; Igarashi, A.; Igarashi, S.; Igarashi, Y.; Igonkina, O.; Ikado, K.; Ikeda, H.; Ikeda, H.; Ikeda, K.; Ilic, J.; Inami, K.; Innes, W. R.; Inoue, Y.; Ishikawa, A.; Ishino, H.; Itagaki, K.; Itami, S.; Itoh, K.; Ivanchenko, V. N.; Iverson, R.; Iwabuchi, M.; Iwai, G.; Iwai, M.; Iwaida, S.; Iwamoto, M.; Iwasaki, H.; Iwasaki, M.; Iwashita, T.; Izen, J. M.; Jackson, D. J.; Jackson, F.; Jackson, G.; Jackson, P. S.; Jacobsen, R. G.; Jacoby, C.; Jaegle, I.; Jain, V.; Jalocha, P.; Jang, H. K.; Jasper, H.; Jawahery, A.; Jayatilleke, S.; Jen, C. M.; Jensen, F.; Jessop, C. P.; Ji, X. B.; John, M. J. J.; Johnson, D. R.; Johnson, J. R.; Jolly, S.; Jones, M.; Joo, K. K.; Joshi, N.; Joshi, N. J.; Judd, D.; Julius, T.; Kadel, R. W.; Kadyk, J. A.; Kagan, H.; Kagan, R.; Kah, D. H.; Kaiser, S.; Kaji, H.; Kajiwara, S.; Kakuno, H.; Kameshima, T.; Kaminski, J.; Kamitani, T.; Kaneko, J.; Kang, J. H.; Kang, J. S.; Kani, T.; Kapusta, P.; Karbach, T. M.; Karolak, M.; Karyotakis, Y.; Kasami, K.; Katano, G.; Kataoka, S. U.; Katayama, N.; Kato, E.; Kato, Y.; Kawai, H.; Kawai, M.; Kawamura, N.; Kawasaki, T.; Kay, J.; Kay, M.; Kelly, M. P.; Kelsey, M. H.; Kent, N.; Kerth, L. T.; Khan, A.; Khan, H. R.; Kharakh, D.; Kibayashi, A.; Kichimi, H.; Kiesling, C.; Kikuchi, M.; Kikutani, E.; Kim, B. H.; Kim, C. H.; Kim, D. W.; Kim, H.; Kim, H. J.; Kim, H. O.; Kim, H. W.; Kim, J. B.; Kim, J. H.; Kim, K. T.; Kim, M. J.; Kim, P.; Kim, S. K.; Kim, S. M.; Kim, T. H.; Kim, Y. I.; Kim, Y. J.; King, G. J.; Kinoshita, K.; Kirk, A.; Kirkby, D.; Kitayama, I.; Klemetti, M.; Klose, V.; Klucar, J.; Knecht, N. S.; Knoepfel, K. J.; Knowles, D. J.; Ko, B. R.; Kobayashi, N.; Kobayashi, S.; Kobayashi, T.; Kobel, M. J.; Koblitz, S.; Koch, H.; Kocian, M. L.; Kodyš, P.; Koeneke, K.; Kofler, R.; Koike, S.; Koishi, S.; Koiso, H.; Kolb, J. A.; Kolya, S. D.; Kondo, Y.; Konishi, H.; Koppenburg, P.; Koptchev, V. B.; Kordich, T. M. B.; Korol, A. A.; Korotushenko, K.; Korpar, S.; Kouzes, R. T.; Kovalskyi, D.; Kowalewski, R.; Kozakai, Y.; Kozanecki, W.; Kral, J. F.; Krasnykh, A.; Krause, R.; Kravchenko, E. A.; Krebs, J.; Kreisel, A.; Kreps, M.; Krishnamurthy, M.; Kroeger, R.; Kroeger, W.; Krokovny, P.; Kronenbitter, B.; Kroseberg, J.; Kubo, T.; Kuhr, T.; Kukartsev, G.; Kulasiri, R.; Kulikov, A.; Kumar, R.; Kumar, S.; Kumita, T.; Kuniya, T.; Kunze, M.; Kuo, C. C.; Kuo, T.-L.; Kurashiro, H.; Kurihara, E.; Kurita, N.; Kuroki, Y.; Kurup, A.; Kutter, P. E.; Kuznetsova, N.; Kvasnička, P.; Kyberd, P.; Kyeong, S. H.; Lacker, H. M.; Lae, C. K.; Lamanna, E.; Lamsa, J.; Lanceri, L.; Landi, L.; Lang, M. I.; Lange, D. J.; Lange, J. S.; Langenegger, U.; Langer, M.; Lankford, A. J.; Lanni, F.; Laplace, S.; Latour, E.; Lau, Y. P.; Lavin, D. R.; Layter, J.; Lebbolo, H.; LeClerc, C.; Leddig, T.; Leder, G.; Le Diberder, F.; Lee, C. L.; Lee, J.; Lee, J. S.; Lee, M. C.; Lee, M. H.; Lee, M. J.; Lee, S.-J.; Lee, S. E.; Lee, S. H.; Lee, Y. J.; Lees, J. P.; Legendre, M.; Leitgab, M.; Leitner, R.; Leonardi, E.; Leonidopoulos, C.; Lepeltier, V.; Leruste, Ph.; Lesiak, T.; Levi, M. E.; Levy, S. L.; Lewandowski, B.; Lewczuk, M. J.; Lewis, P.; Li, H.; Li, H. B.; Li, S.; Li, X.; Li, Y.; Gioi, L. Li; Libby, J.; Lidbury, J.; Lillard, V.; Lim, C. L.; Limosani, A.; Lin, C. S.; Lin, J. Y.; Lin, S. W.; Lin, Y. S.; Lindquist, B.; Lindsay, C.; Lista, L.; Liu, C.; Liu, F.; Liu, H.; Liu, H. M.; Liu, J.; Liu, R.; Liu, T.; Liu, Y.; Liu, Z. Q.; Liventsev, D.; Lo Vetere, M.; Locke, C. B.; Lockman, W. S.; Di Lodovico, F.; Lombardo, V.; London, G. W.; Lopes Pegna, D.; Lopez, L.; Lopez-March, N.; Lory, J.; LoSecco, J. M.; Lou, X. C.; Louvot, R.; Lu, A.; Lu, C.; Lu, M.; Lu, R. S.; Lueck, T.; Luitz, S.; Lukin, P.; Lund, P.; Luppi, E.; Lutz, A. M.; Lutz, O.; Lynch, G.; Lynch, H. L.; Lyon, A. J.; Lyubinsky, V. R.; MacFarlane, D. B.; Mackay, C.; MacNaughton, J.; Macri, M. M.; Madani, S.; Mader, W. F.; Majewski, S. A.; Majumder, G.; Makida, Y.; Malaescu, B.; Malaguti, R.; Malclés, J.; Mallik, U.; Maly, E.; Mamada, H.; Manabe, A.; Mancinelli, G.; Mandelkern, M.; Mandl, F.; Manfredi, P. F.; Mangeol, D. J. J.; Manoni, E.; Mao, Z. P.; Margoni, M.; Marker, C. E.; Markey, G.; Marks, J.; Marlow, D.; Marques, V.; Marsiske, H.; Martellotti, S.; Martin, E. C.; Martin, J. P.; Martin, L.; Martinez, A. J.; Marzolla, M.; Mass, A.; Masuzawa, M.; Mathieu, A.; Matricon, P.; Matsubara, T.; Matsuda, T.; Matsuda, T.; Matsumoto, H.; Matsumoto, S.; Matsumoto, T.; Matsuo, H.; Mattison, T. S.; Matvienko, D.; Matyja, A.; Mayer, B.; Mazur, M. A.; Mazzoni, M. A.; McCulloch, M.; McDonald, J.; McFall, J. D.; McGrath, P.; McKemey, A. K.; McKenna, J. A.; Mclachlin, S. E.; McMahon, S.; McMahon, T. R.; McOnie, S.; Medvedeva, T.; Melen, R.; Mellado, B.; Menges, W.; Menke, S.; Merchant, A. M.; Merkel, J.; Messner, R.; Metcalfe, S.; Metzler, S.; Meyer, N. T.; Meyer, T. I.; Meyer, W. T.; Michael, A. K.; Michelon, G.; Michizono, S.; Micout, P.; Miftakov, V.; Mihalyi, A.; Mikami, Y.; Milanes, D. A.; Milek, M.; Mimashi, T.; Minamora, J. S.; Mindas, C.; Minutoli, S.; Mir, L. M.; Mishra, K.; Mitaroff, W.; Miyake, H.; Miyashita, T. S.; Miyata, H.; Miyazaki, Y.; Moffitt, L. C.; Mohanty, G. B.; Mohapatra, A.; Mohapatra, A. K.; Mohapatra, D.; Moll, A.; Moloney, G. R.; Mols, J. P.; Mommsen, R. K.; Monge, M. R.; Monorchio, D.; Moore, T. B.; Moorhead, G. F.; Mora de Freitas, P.; Morandin, M.; Morgan, N.; Morgan, S. E.; Morganti, M.; Morganti, S.; Mori, S.; Mori, T.; Morii, M.; Morris, J. P.; Morsani, F.; Morton, G. W.; Moss, L. J.; Mouly, J. P.; Mount, R.; Mueller, J.; Müller-Pfefferkorn, R.; Mugge, M.; Muheim, F.; Muir, A.; Mullin, E.; Munerato, M.; Murakami, A.; Murakami, T.; Muramatsu, N.; Musico, P.; Nagai, I.; Nagamine, T.; Nagasaka, Y.; Nagashima, Y.; Nagayama, S.; Nagel, M.; Naisbit, M. T.; Nakadaira, T.; Nakahama, Y.; Nakajima, M.; Nakajima, T.; Nakamura, I.; Nakamura, T.; Nakamura, T. T.; Nakano, E.; Nakayama, H.; Nam, J. W.; Narita, S.; Narsky, I.; Nash, J. A.; Natkaniec, Z.; Nauenberg, U.; Nayak, M.; Neal, H.; Nedelkovska, E.; Negrini, M.; Neichi, K.; Nelson, D.; Nelson, S.; Neri, N.; Nesom, G.; Neubauer, S.; Newman-Coburn, D.; Ng, C.; Nguyen, X.; Nicholson, H.; Niebuhr, C.; Nief, J. Y.; Niiyama, M.; Nikolich, M. B.; Nisar, N. K.; Nishimura, K.; Nishio, Y.; Nitoh, O.; Nogowski, R.; Noguchi, S.; Nomura, T.; Nordby, M.; Nosochkov, Y.; Novokhatski, A.; Nozaki, S.; Nozaki, T.; Nugent, I. M.; O'Grady, C. P.; O'Neale, S. W.; O'Neill, F. G.; Oberhof, B.; Oddone, P. J.; Ofte, I.; Ogawa, A.; Ogawa, K.; Ogawa, S.; Ogawa, Y.; Ohkubo, R.; Ohmi, K.; Ohnishi, Y.; Ohno, F.; Ohshima, T.; Ohshima, Y.; Ohuchi, N.; Oide, K.; Oishi, N.; Okabe, T.; Okazaki, N.; Okazaki, T.; Okuno, S.; Olaiya, E. O.; Olivas, A.; Olley, P.; Olsen, J.; Ono, S.; Onorato, G.; Onuchin, A. P.; Onuki, Y.; Ooba, T.; Orimoto, T. J.; Oshima, T.; Osipenkov, I. L.; Ostrowicz, W.; Oswald, C.; Otto, S.; Oyang, J.; Oyanguren, A.; Ozaki, H.; Ozcan, V. E.; Paar, H. P.; Padoan, C.; Paick, K.; Palka, H.; Pan, B.; Pan, Y.; Panduro Vazquez, W.; Panetta, J.; Panova, A. I.; Panvini, R. S.; Panzenböck, E.; Paoloni, E.; Paolucci, P.; Pappagallo, M.; Paramesvaran, S.; Park, C. S.; Park, C. W.; Park, H.; Park, H. K.; Park, K. S.; Park, W.; Parry, R. J.; Parslow, N.; Passaggio, S.; Pastore, F. C.; Patel, P. M.; Patrignani, C.; Patteri, P.; Pavel, T.; Pavlovich, J.; Payne, D. J.; Peak, L. S.; Peimer, D. R.; Pelizaeus, M.; Pellegrini, R.; Pelliccioni, M.; Peng, C. C.; Peng, J. C.; Peng, K. C.; Peng, T.; Penichot, Y.; Pennazzi, S.; Pennington, M. R.; Penny, R. C.; Penzkofer, A.; Perazzo, A.; Perez, A.; Perl, M.; Pernicka, M.; Perroud, J.-P.; Peruzzi, I. M.; Pestotnik, R.; Peters, K.; Peters, M.; Petersen, B. A.; Petersen, T. C.; Petigura, E.; Petrak, S.; Petrella, A.; Petrič, M.; Petzold, A.; Pia, M. G.; Piatenko, T.; Piccolo, D.; Piccolo, M.; Piemontese, L.; Piemontese, M.; Pierini, M.; Pierson, S.; Pioppi, M.; Piredda, G.; Pivk, M.; Plaszczynski, S.; Polci, F.; Pompili, A.; Poropat, P.; Posocco, M.; Potter, C. T.; Potter, R. J. L.; Prasad, V.; Prebys, E.; Prencipe, E.; Prendki, J.; Prepost, R.; Prest, M.; Prim, M.; Pripstein, M.; Prudent, X.; Pruvot, S.; Puccio, E. M. T.; Purohit, M. V.; Qi, N. D.; Quinn, H.; Raaf, J.; Rabberman, R.; Raffaelli, F.; Ragghianti, G.; Rahatlou, S.; Rahimi, A. M.; Rahmat, R.; Rakitin, A. Y.; Randle-Conde, A.; Rankin, P.; Rashevskaya, I.; Ratkovsky, S.; Raven, G.; Re, V.; Reep, M.; Regensburger, J. J.; Reidy, J.; Reif, R.; Reisert, B.; Renard, C.; Renga, F.; Ricciardi, S.; Richman, J. D.; Ritchie, J. L.; Ritter, M.; Rivetta, C.; Rizzo, G.; Roat, C.; Robbe, P.; Roberts, D. A.; Robertson, A. I.; Robutti, E.; Rodier, S.; Rodriguez, D. M.; Rodriguez, J. L.; Rodriguez, R.; Roe, N. A.; Röhrken, M.; Roethel, W.; Rolquin, J.; Romanov, L.; Romosan, A.; Ronan, M. T.; Rong, G.; Ronga, F. J.; Roos, L.; Root, N.; Rosen, M.; Rosenberg, E. I.; Rossi, A.; Rostomyan, A.; Rotondo, M.; Roussot, E.; Roy, J.; Rozanska, M.; Rozen, Y.; Rozen, Y.; Rubin, A. E.; Ruddick, W. O.; Ruland, A. M.; Rybicki, K.; Ryd, A.; Ryu, S.; Ryuko, J.; Sabik, S.; Sacco, R.; Saeed, M. A.; Safai Tehrani, F.; Sagawa, H.; Sahoo, H.; Sahu, S.; Saigo, M.; Saito, T.; Saitoh, S.; Sakai, K.; Sakamoto, H.; Sakaue, H.; Saleem, M.; Salnikov, A. A.; Salvati, E.; Salvatore, F.; Samuel, A.; Sanders, D. A.; Sanders, P.; Sandilya, S.; Sandrelli, F.; Sands, W.; Sands, W. R.; Sanpei, M.; Santel, D.; Santelj, L.; Santoro, V.; Santroni, A.; Sanuki, T.; Sarangi, T. R.; Saremi, S.; Sarti, A.; Sasaki, T.; Sasao, N.; Satapathy, M.; Sato, Nobuhiko; Sato, Noriaki; Sato, Y.; Satoyama, N.; Satpathy, A.; Savinov, V.; Savvas, N.; Saxton, O. H.; Sayeed, K.; Schaffner, S. F.; Schalk, T.; Schenk, S.; Schieck, J. R.; Schietinger, T.; Schilling, C. J.; Schindler, R. H.; Schmid, S.; Schmitz, R. E.; Schmuecker, H.; Schneider, O.; Schnell, G.; Schönmeier, P.; Schofield, K. C.; Schott, G.; Schröder, H.; Schram, M.; Schubert, J.; Schümann, J.; Schultz, J.; Schumm, B. A.; Schune, M. H.; Schwanke, U.; Schwarz, H.; Schwiening, J.; Schwierz, R.; Schwitters, R. F.; Sciacca, C.; Sciolla, G.; Scott, I. J.; Seeman, J.; Seiden, A.; Seitz, R.; Seki, T.; Sekiya, A. I.; Semenov, S.; Semmler, D.; Sen, S.; Senyo, K.; Seon, O.; Serbo, V. V.; Serednyakov, S. I.; Serfass, B.; Serra, M.; Serrano, J.; Settai, Y.; Seuster, R.; Sevior, M. E.; Shakhova, K. V.; Shang, L.; Shapkin, M.; Sharma, V.; Shebalin, V.; Shelkov, V. G.; Shen, B. C.; Shen, D. Z.; Shen, Y. T.; Sherwood, D. J.; Shibata, T.; Shibata, T. A.; Shibuya, H.; Shidara, T.; Shimada, K.; Shimoyama, M.; Shinomiya, S.; Shiu, J. G.; Shorthouse, H. W.; Shpilinskaya, L. I.; Sibidanov, A.; Sicard, E.; Sidorov, A.; Sidorov, V.; Siegle, V.; Sigamani, M.; Simani, M. C.; Simard, M.; Simi, G.; Simon, F.; Simonetto, F.; Sinev, N. B.; Singh, H.; Singh, J. B.; Sinha, R.; Sitt, S.; Skovpen, Yu. I.; Sloane, R. J.; Smerkol, P.; Smith, A. J. S.; Smith, D.; Smith, D. S.; Smith, J. G.; Smol, A.; Snoek, H. L.; Snyder, A.; So, R. Y.; Sobie, R. J.; Soderstrom, E.; Soha, A.; Sohn, Y. S.; Sokoloff, M. D.; Sokolov, A.; Solagna, P.; Solovieva, E.; Soni, N.; Sonnek, P.; Sordini, V.; Spaan, B.; Spanier, S. M.; Spencer, E.; Speziali, V.; Spitznagel, M.; Spradlin, P.; Staengle, H.; Stamen, R.; Stanek, M.; Stanič, S.; Stark, J.; Steder, M.; Steininger, H.; Steinke, M.; Stelzer, J.; Stevanato, E.; Stocchi, A.; Stock, R.; Stoeck, H.; Stoker, D. P.; Stroili, R.; Strom, D.; Strother, P.; Strube, J.; Stugu, B.; Stypula, J.; Su, D.; Suda, R.; Sugahara, R.; Sugi, A.; Sugimura, T.; Sugiyama, A.; Suitoh, S.; Sullivan, M. K.; Sumihama, M.; Sumiyoshi, T.; Summers, D. J.; Sun, L.; Sun, S.; Sundermann, J. E.; Sung, H. F.; Susaki, Y.; Sutcliffe, P.; Suzuki, A.; Suzuki, J.; Suzuki, J. I.; Suzuki, K.; Suzuki, S.; Suzuki, S. Y.; Swain, J. E.; Swain, S. K.; T'Jampens, S.; Tabata, M.; Tackmann, K.; Tajima, H.; Tajima, O.; Takahashi, K.; Takahashi, S.; Takahashi, T.; Takasaki, F.; Takayama, T.; Takita, M.; Tamai, K.; Tamponi, U.; Tamura, N.; Tan, N.; Tan, P.; Tanabe, K.; Tanabe, T.; Tanaka, H. A.; Tanaka, J.; Tanaka, M.; Tanaka, S.; Tanaka, Y.; Tanida, K.; Taniguchi, N.; Taras, P.; Tasneem, N.; Tatishvili, G.; Tatomi, T.; Tawada, M.; Taylor, F.; Taylor, G. N.; Taylor, G. P.; Telnov, V. I.; Teodorescu, L.; Ter-Antonyan, R.; Teramoto, Y.; Teytelman, D.; Thérin, G.; Thiebaux, Ch.; Thiessen, D.; Thomas, E. W.; Thompson, J. M.; Thorne, F.; Tian, X. C.; Tibbetts, M.; Tikhomirov, I.; Tinslay, J. S.; Tiozzo, G.; Tisserand, V.; Tocut, V.; Toki, W. H.; Tomassini, E. W.; Tomoto, M.; Tomura, T.; Torassa, E.; Torrence, E.; Tosi, S.; Touramanis, C.; Toussaint, J. C.; Tovey, S. N.; Trapani, P. P.; Treadwell, E.; Triggiani, G.; Trincaz-Duvoid, S.; Trischuk, W.; Troost, D.; Trunov, A.; Tsai, K. L.; Tsai, Y. T.; Tsujita, Y.; Tsukada, K.; Tsukamoto, T.; Tuggle, J. M.; Tumanov, A.; Tung, Y. W.; Turnbull, L.; Turner, J.; Turri, M.; Uchida, K.; Uchida, M.; Uchida, Y.; Ueki, M.; Ueno, K.; Ujiie, N.; Ulmer, K. A.; Unno, Y.; Urquijo, P.; Ushiroda, Y.; Usov, Y.; Usseglio, M.; Usuki, Y.; Uwer, U.; Va'vra, J.; Vahsen, S. E.; Vaitsas, G.; Valassi, A.; Vallazza, E.; Vallereau, A.; Vanhoefer, P.; van Hoek, W. C.; Van Hulse, C.; van Winkle, D.; Varner, G.; Varnes, E. W.; Varvell, K. E.; Vasileiadis, G.; Velikzhanin, Y. S.; Verderi, M.; Versillé, S.; Vervink, K.; Viaud, B.; Vidal, P. B.; Villa, S.; Villanueva-Perez, P.; Vinograd, E. L.; Vitale, L.; Vitug, G. M.; Voß, C.; Voci, C.; Voena, C.; Volk, A.; von Wimmersperg-Toeller, J. H.; Vorobyev, V.; Vossen, A.; Vuagnin, G.; Vuosalo, C. O.; Wacker, K.; Wagner, A. P.; Wagner, D. L.; Wagner, G.; Wagner, M. N.; Wagner, S. R.; Wagoner, D. E.; Walker, D.; Walkowiak, W.; Wallom, D.; Wang, C. C.; Wang, C. H.; Wang, J.; Wang, J. G.; Wang, K.; Wang, L.; Wang, L. L.; Wang, P.; Wang, T. J.; Wang, W. F.; Wang, X. L.; Wang, Y. F.; Wappler, F. R.; Watanabe, M.; Watson, A. T.; Watson, J. E.; Watson, N. K.; Watt, M.; Weatherall, J. H.; Weaver, M.; Weber, T.; Wedd, R.; Wei, J. T.; Weidemann, A. W.; Weinstein, A. J. R.; Wenzel, W. A.; West, C. A.; West, C. G.; West, T. J.; White, E.; White, R. M.; Wicht, J.; Widhalm, L.; Wiechczynski, J.; Wienands, U.; Wilden, L.; Wilder, M.; Williams, D. C.; Williams, G.; Williams, J. C.; Williams, K. M.; Williams, M. I.; Willocq, S. Y.; Wilson, J. R.; Wilson, M. G.; Wilson, R. J.; Winklmeier, F.; Winstrom, L. O.; Winter, M. A.; Wisniewski, W. J.; Wittgen, M.; Wittlin, J.; Wittmer, W.; Wixted, R.; Woch, A.; Wogsland, B. J.; Won, E.; Wong, Q. K.; Wray, B. C.; Wren, A. C.; Wright, D. M.; Wu, C. H.; Wu, J.; Wu, S. L.; Wulsin, H. W.; Xella, S. M.; Xie, Q. L.; Xie, Y.; Xu, Z. Z.; Yéche, Ch.; Yamada, Y.; Yamaga, M.; Yamaguchi, A.; Yamaguchi, H.; Yamaki, T.; Yamamoto, H.; Yamamoto, N.; Yamamoto, R. K.; Yamamoto, S.; Yamanaka, T.; Yamaoka, H.; Yamaoka, J.; Yamaoka, Y.; Yamashita, Y.; Yamauchi, M.; Yan, D. S.; Yan, Y.; Yanai, H.; Yanaka, S.; Yang, H.; Yang, R.; Yang, S.; Yarritu, A. K.; Yashchenko, S.; Yashima, J.; Yasin, Z.; Yasu, Y.; Ye, S. W.; Yeh, P.; Yi, J. I.; Yi, K.; Yi, M.; Yin, Z. W.; Ying, J.; Yocky, G.; Yokoyama, K.; Yokoyama, M.; Yokoyama, T.; Yoshida, K.; Yoshida, M.; Yoshimura, Y.; Young, C. C.; Yu, C. X.; Yu, Z.; Yuan, C. Z.; Yuan, Y.; Yumiceva, F. X.; Yusa, Y.; Yushkov, A. N.; Yuta, H.; Zacek, V.; Zain, S. B.; Zallo, A.; Zambito, S.; Zander, D.; Zang, S. L.; Zanin, D.; Zaslavsky, B. G.; Zeng, Q. L.; Zghiche, A.; Zhang, B.; Zhang, J.; Zhang, J.; Zhang, L.; Zhang, L. M.; Zhang, S. Q.; Zhang, Z. P.; Zhao, H. W.; Zhao, M.; Zhao, Z. G.; Zheng, Y.; Zheng, Y. H.; Zheng, Z. P.; Zhilich, V.; Zhou, P.; Zhu, R. Y.; Zhu, Y. S.; Zhu, Z. M.; Zhulanov, V.; Ziegler, T.; Ziegler, V.; Zioulas, G.; Zisman, M.; Zito, M.; Zürcher, D.; Zwahlen, N.; Zyukova, O.; Živko, T.; Žontar, D.

2014-11-01

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.

Gearing up to the factory of the future

NASA Astrophysics Data System (ADS)

Godfrey, D. E.

1985-01-01

The features of factories and manufacturing techniques and tools of the near future are discussed. The spur to incorporate new technologies on the factory floor will originate in management, who must guide the interfacing of computer-enhanced equipment with traditional manpower, materials and machines. Electronic control with responsiveness and flexibility will be the key concept in an integrated approach to processing materials. Microprocessor controlled laser and fluid cutters add accuracy to cutting operations. Unattended operation will become feasible when automated inspection is added to a work station through developments in robot vision. Optimum shop management will be achieved through AI programming of parts manufacturing, optimized work flows, and cost accounting. The automation enhancements will allow designers to affect directly parts being produced on the factory floor.

A Classroom of Polymer Factories.

ERIC Educational Resources Information Center

Harris, Mary E.; Van Natta, Sandra

1998-01-01

Provides an activity in which students create small classroom factories and investigate several aspects of production including design, engineering, quality control, waste management, packaging, shipment, and communication. (DDR)

An examination of effect estimation in factorial and standardly-tailored designs

PubMed Central

Allore, Heather G; Murphy, Terrence E

2012-01-01

Background Many clinical trials are designed to test an intervention arm against a control arm wherein all subjects are equally eligible for all interventional components. Factorial designs have extended this to test multiple intervention components and their interactions. A newer design referred to as a ‘standardly-tailored’ design, is a multicomponent interventional trial that applies individual interventional components to modify risk factors identified a priori and tests whether health outcomes differ between treatment arms. Standardly-tailored designs do not require that all subjects be eligible for every interventional component. Although standardly-tailored designs yield an estimate for the net effect of the multicomponent intervention, it has not yet been shown if they permit separate, unbiased estimation of individual component effects. The ability to estimate the most potent interventional components has direct bearing on conducting second stage translational research. Purpose We present statistical issues related to the estimation of individual component effects in trials of geriatric conditions using factorial and standardly-tailored designs. The medical community is interested in second stage translational research involving the transfer of results from a randomized clinical trial to a community setting. Before such research is undertaken, main effects and synergistic and or antagonistic interactions between them should be identified. Knowledge of the relative strength and direction of the effects of the individual components and their interactions facilitates the successful transfer of clinically significant findings and may potentially reduce the number of interventional components needed. Therefore the current inability of the standardly-tailored design to provide unbiased estimates of individual interventional components is a serious limitation in their applicability to second stage translational research. Methods We discuss estimation of individual component effects from the family of factorial designs and this limitation for standardly-tailored designs. We use the phrase ‘factorial designs’ to describe full-factorial designs and their derivatives including the fractional factorial, partial factorial, incomplete factorial and modified reciprocal designs. We suggest two potential directions for designing multicomponent interventions to facilitate unbiased estimates of individual interventional components. Results Full factorial designs and their variants are the most common multicomponent trial design described in the literature and differ meaningfully from standardly-tailored designs. Factorial and standardly-tailored designs result in similar estimates of net effect with different levels of precision. Unbiased estimation of individual component effects from a standardly-tailored design will require new methodology. Limitations Although clinically relevant in geriatrics, previous applications of standardly-tailored designs have not provided unbiased estimates of the effects of individual interventional components. Discussion Future directions to estimate individual component effects from standardly-tailored designs include applying D-optimal designs and creating independent linear combinations of risk factors analogous to factor analysis. Conclusion Methods are needed to extract unbiased estimates of the effects of individual interventional components from standardly-tailored designs. PMID:18375650

Relationship between blood lead level and work related factors using the NIIH questionnaire system.

PubMed

Saito, Hiroyuki; Mori, Ippei; Ogawa, Yasutaka; Hirata, Mamoru

2006-10-01

Over an 11-yr period (1990-2000), a questionnaire survey on work environmental management and environmental improvement was conducted on 259 lead-handling factories and 7,623 subjects. Labour Inspection Offices identified these factories as requiring environmental improvement, or possessing a desire to improve their working environment. We analyzed factors affecting blood lead levels (PbBs). These factors were gender, age, employment duration, factory size, work environment control (WEC) class, and job categories. The PbB of men was found to be higher than that of women, and may be due to the differences in job distribution. PbB increased along with increasing age and employment duration. PbB declined as the factory size increased. The odds ratio (OR) of PbB higher than 20 microg/dl according to factory size was significantly high even after adjusting for WEC class. This demonstrates that not only the working environment but also safety management was poorer among small-scale factories that large-scale factories. The rise of PbB along with the increase of WEC class confirmed that the results of work environment measurement are correlated with individual exposure levels. The risk of having a 20 microg/dl or higher PbB was different for various lead handling jobs. Smelting or refining lead had the highest risk for lead exposure while painting or baking had the lowest risk. As our study population was not a randomly selected sample, we are unable to generalize our results for workers across Japan. However, we were able to indicate which jobs pose a high-risk and the effectiveness of using the work environment control class as an index of worksite environment levels.

Beamline front end for in-vacuum short period undulator at the photon factory storage ring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyauchi, Hiroshi, E-mail: hiroshi.miyauchi@kek.jp; Department of Accelerator Science, School of High Energy Accelerator Science, SOKENDAI; Tahara, Toshihiro, E-mail: ttahara@post.kek.jp

The straight-section upgrade project of the Photon Factory created four new short straight sections capable of housing in-vacuum short period undulators. The first to fourth short period undulators SGU#17, SGU#03, SGU#01 and SGU#15 were installed at the 2.5-GeV Photon Factory storage ring in 2005, 2006, 2009 and 2013, respectively. The beamline front end for SGU#15 is described in this paper.

Plant Factory

NASA Astrophysics Data System (ADS)

Ikeda, Hideo

Recently, much attention is paid on the plant factory, as it enable to grow plants stably under extraordinary climate condition such as high and/or low air temperature and less rain. Lots of questions such as decreasing investing cost, realizing stable plant production and developing new growing technique should be solved for making popular this growing system. However, I think that we can introduce a highly developed Japanese industrial now-how to plant factory system and can produce a business chance to the world market.

Cyber and physical equipment digital control system in Industry 4.0 item designing company

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-05-01

The problem of organization of digital control of the item designing company equipped with cyber and physical systems is being studied. A scheme of cyber and physical systems and personnel interaction in the Industry 4.0 smart factory company is presented. A scheme of assembly units transportation in the Industry 4.0 smart factory company is provided. A scheme of digital control system in the Industry 4.0 smart factory company is given.

Factorial validity of the Movement Assessment Battery for Children-2 (age band 2).

PubMed

Wagner, Matthias Oliver; Kastner, Julia; Petermann, Franz; Bös, Klaus

2011-01-01

The Movement Assessment Battery for Children-2 (M-ABC-2) is one of the most commonly used tests for the diagnosis of specific developmental disorders of motor function (F82). The M-ABC-2 comprises eight subtests per age band (AB) that are assigned to three dimensions: manual dexterity, aiming and catching, and balance. However, while previous exploratory findings suggested the correctness of the assumption of factorial validity, there is no empirical evidence that the M-ABC-2 subtests allow for a valid reproduction of the postulated factorial structure. The purpose of this study was to empirically confirm the factorial validity of the M-ABC-2. The German normative sample of AB2 (7-10 years; N=323) was used as the study sample for the empirical analyses. Confirmatory factor analysis was used to verify the factorial validity of the M-ABC-2 (AB2). The incremental fit indices (χ2=28.675; df=17; Bollen-Stine p value=0.318; RMSEA=0.046 [0.011-0.075]; SRMR=0.038; CFI=0.960) provided evidence for the factorial validity of the M-ABC-2 (AB2). However, because of a lack of empirical verification for convergent and discriminant validity, there is still no evidence that F82 can be diagnosed using M-ABC-2 (AB2). Copyright © 2010 Elsevier Ltd. All rights reserved.

[Prevalence and influence factors of hypertension among mechanic factory workers].

PubMed

Pang, Li-Juan; Chen, Li-Zhang; Fu, Ben-Yan

2005-06-01

To determine the status and influence factors of hypertension on mechanic factory workers and to provide reference for further hypertension prevention and control. A cross-sectional study on 1205 workers (exposed to different noise levels) in Hunan was carried out by using questionaire and measuring the blood pressure of the workers and the noise exposure level in the workplace. The prevalence and the influence factors of hypertension among mechanic factory workers were analysed. The hypertension prevalence was 12.1%. Logistic regression analysis showed the body weight index (BMI), age, and history of hypertension in parents and accumulative noise dose levels influenced the hypertension prevalence. Controlling the body weight, reducing alcohol consumption, decreasing the sound pressure level in workshops and advocating healthy diet may reduce the prevalence rate of hypertension among mechanic factory workers.

Cleaner production in the ammonia-soda industry: an ecological and economic study.

PubMed

Kasikowski, T; Buczkowski, R; Lemanowska, E

2004-12-01

Five methods to reduce the negative influence of soda ash factories on the natural environment are presented: 1. obtaining calcium-magnesium phosphates by treating the suspension from raw brine purification with orthophosphoric acid (H(3)PO(4)), 2. production of precipitated chalk from soda processing waste, 3. production of gypsum and semi-brine, 4. desulphurisation of fume gases from the factory power plant, 5. utilization of distiller waste. The tests, accomplished on a laboratory scale, showed the high efficiency of these methods. Economic analysis has proved that only four out of the five presented processes can have a positive financial effect on soda ash factories, as well as being well justified economically. The value of two of the innovations presented is confirmed by their implementation in factories.

Recent progress in neutrino factory and muon collider research within the Muon Collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. M. Alsharoa; Charles M. Ankenbrandt; Muzaffer Atac

2003-08-01

We describe the status of our effort to realize a first neutrino factory and the progress made in understanding the problems associated with the collection and cooling of muons towards that end. We summarize the physics that can be done with neutrino factories as well as with intense cold beams of muons. The physics potential of muon colliders is reviewed, both as Higgs Factories and compact high energy lepton colliders. The status and timescale of our research and development effort is reviewed as well as the latest designs in cooling channels including the promise of ring coolers in achieving longitudinalmore » and transverse cooling simultaneously. We detail the efforts being made to mount an international cooling experiment to demonstrate the ionization cooling of muons.« less

Ergonomic analysis jobs in recovered factories.

PubMed

Cuenca, Gabriela; Zotta, Gastón

2012-01-01

With the advent of the deep economic crisis in Argentina on 2001, the recovery of companies through to the creation of the Cooperatives Working Self-Management or Factories Recovered by its workers was constituted as one of the ways in which the salaried disobeyed the increasing unemployment. When the companies turn into recovered factories they tend to leave of side practices that have been seen like imposed by the previous organization and not understanding them as a primary condition for the execution of his tasks. Safety and ergonomics are two disciplines that are no longer considered relevant to the daily work. Therefore this investigation aims to revalue, undergo semantic to give back to a place in every organization analyzed. This research developed a self-diagnostic tool for working conditions, and the environment, present in the recovered factories.

Generalized Factorial Moments

NASA Astrophysics Data System (ADS)

Bialas, A.

2004-02-01

It is shown that the method of eliminating the statistical fluctuations from event-by-event analysis proposed recently by Fu and Liu can be rewritten in a compact form involving the generalized factorial moments.

Virtual Factory Framework for Supporting Production Planning and Control.

PubMed

Kibira, Deogratias; Shao, Guodong

2017-01-01

Developing optimal production plans for smart manufacturing systems is challenging because shop floor events change dynamically. A virtual factory incorporating engineering tools, simulation, and optimization generates and communicates performance data to guide wise decision making for different control levels. This paper describes such a platform specifically for production planning. We also discuss verification and validation of the constituent models. A case study of a machine shop is used to demonstrate data generation for production planning in a virtual factory.

Development of muon ring coolers, neutrino factories and supersymmetric Higgs factory

NASA Astrophysics Data System (ADS)

Cline, David B.

2003-08-01

Over the past few years or so a key new development is the invention of ring coolers for muon cooling. In particular, these rings demonstrate robust cooling of the longitudinal phase space. We discuss the quadrupole or UCLA ring cooler and the prospects to make this a final cooler to reduce the transceiver emittance to the value required for a mu+mu- collider. This will lead to a Higgs factory for the A0/H0 in supersymmetry models.

Development of Muon Ring Coolers, Neutrino Factories and Supersymmetric Higgs Factory

NASA Astrophysics Data System (ADS)

Cline, David B.

2002-12-01

Over the past few years or so a key new development is the invention of Ring Coolers for muon cooling. In particular these rings demonstrate robust cooling of the longitudinal phase space. We discuss the Quadrupole or UCLA Ring Cooler and the prospects to make this a final cooler to reduce the tranceiver emittance to the value required for a μ+ μ- collider. This will lead to a Higgs Factory for the A0/H0 in supersymmetry models.

Radiative Penguin Decays at the B Factories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koneke, Karsten; /MIT, LNS

2007-11-16

In this article, I review the most recent results in radiative penguin decays from the B factories Belle and BABAR. Most notably, I will talk about the recent new observations in the decays B {yields} ({rho}/{omega}) {gamma}, a new analysis technique in b {yields} s{gamma}, and first measurements of radiative penguin decays in the B{sup 0}{sub s} meson system. Finally, I will summarize the current status and future prospects of radiative penguin B physics at the B factories.

26. SOUTH TO CIRCA 1865 METALTURNING LATHE (POSSIBLY MADE BY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. SOUTH TO CIRCA 1865 METAL-TURNING LATHE (POSSIBLY MADE BY AMES MFG. CO., CHICOPEE, MASS.) WITH PARTS/TOOL BINS ALONG EAST INTERIOR WALL OF FACTORY. BENEATH THE LATHE ON THE FLOOR IS A STACK OF AUTOMOBILE AXLES AS 'RAW MATERIAL' FOR FABRICATING REPAIR PARTS FOR PUMPS AND WATER SUPPLY EQUIPMENT. ON THE POST BEHIND THE MACHINE IS ONE OF THE HISTORIC ELECTRICAL FUSE/SWITCH BOXES FOR THE FACTORY. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

Development of integrated control system for smart factory in the injection molding process

NASA Astrophysics Data System (ADS)

Chung, M. J.; Kim, C. Y.

2018-03-01

In this study, we proposed integrated control system for automation of injection molding process required for construction of smart factory. The injection molding process consists of heating, tool close, injection, cooling, tool open, and take-out. Take-out robot controller, image processing module, and process data acquisition interface module are developed and assembled to integrated control system. By adoption of integrated control system, the injection molding process can be simplified and the cost for construction of smart factory can be inexpensive.

Microeconomics of 300-mm process module control

NASA Astrophysics Data System (ADS)

Monahan, Kevin M.; Chatterjee, Arun K.; Falessi, Georges; Levy, Ady; Stoller, Meryl D.

2001-08-01

Simple microeconomic models that directly link metrology, yield, and profitability are rare or non-existent. In this work, we validate and apply such a model. Using a small number of input parameters, we explain current yield management practices in 200 mm factories. The model is then used to extrapolate requirements for 300 mm factories, including the impact of simultaneous technology transitions to 130nm lithography and integrated metrology. To support our conclusions, we use examples relevant to factory-wide photo module control.

21. SOUTH THROUGH FACTORY FROM NEAR NORTHEAST CORNER TOWARD SOUTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. SOUTH THROUGH FACTORY FROM NEAR NORTHEAST CORNER TOWARD SOUTH FRONT OF BUILDING. VISIBLE FROM LEFT TO RIGHT ARE CIRCA 1865 METAL-TURNING LATHE; CIRCA 1875 POWER SHEAR, PUNCH, AND RIVETING MACHINE (WITH FLOORING RAISED TO SHOW OPERATOR'S 'PIT'); LINE SHAFT WITH PULLEYS AND BELTS FOR OPERATING MACHINERY; PERMANENT WOODEN LADDER TO SKYLIGHT AREA (LOCATION OF CIRCA 1920 ELECTRIC MOTOR WHICH POWERED LINE SHAFT); AND BUFFALO FORGE CO. HAND SHEAR FOR ANGLE STEEL. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

9. NORTHEAST FROM SOUTH ENTRANCE ACROSS RECEIVING AREA OF FACTORY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. NORTHEAST FROM SOUTH ENTRANCE ACROSS RECEIVING AREA OF FACTORY PAST THE GLASS-ENCLOSED OFFICE TOWARD SHOP AREA. BESIDE THE VERTICAL POST ROOF SUPPORT IN THE LEFT FOREGROUND IS A SCALE AND DRAFTING TABLE. BESIDE THE OFFICE WALL ON THE RIGHT IS A SMALL SHOP REPAIR BENCH, WHILE ABOVE THE OFFICE WINDOWS ARE BOXES OF COMPANY MANUSCRIPT BUSINESS RECORDS. THE WELDED METAL PIPE RACK IS A MODERN INTRUSION. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

Dust exposure and chronic respiratory symptoms among coffee curing workers in Kilimanjaro: a cross sectional study.

PubMed

Sakwari, Gloria; Bråtveit, Magne; Mamuya, Simon H D; Moen, Bente E

2011-11-24

Coffee processing causes organic dust exposure which may lead to development of respiratory symptoms. Previous studies have mainly focused on workers involved in roasting coffee in importing countries. This study was carried out to determine total dust exposure and respiratory health of workers in Tanzanian primary coffee-processing factories. A cross sectional study was conducted among 79 workers in two coffee factories, and among 73 control workers in a beverage factory. Personal samples of total dust (n = 45 from the coffee factories and n = 19 from the control factory) were collected throughout the working shift from the breathing zone of the workers. A questionnaire with modified questions from the American Thoracic Society questionnaire was used to assess chronic respiratory symptoms. Differences between groups were tested by using independent t-tests and Chi square tests. Poisson Regression Model was used to estimate prevalence ratio, adjusting for age, smoking, presence of previous lung diseases and years worked in dusty factories. All participants were male. The coffee workers had a mean age of 40 years and were older than the controls (31 years). Personal total dust exposure in the coffee factories were significantly higher than in the control factory (geometric mean (GM) 1.23 mg/m3, geometric standard deviation (GSD) (0.8) vs. 0.21(2.4) mg/m3). Coffee workers had significantly higher prevalence than controls for cough with sputum (23% vs. 10%; Prevalence ratio (PR); 2.5, 95% CI 1.0-5.9) and chest tightness (27% vs. 13%; PR; 2.4, 95% CI 1.1-5.2). The prevalence of morning cough, cough with and without sputum for 4 days or more in a week was also higher among coffee workers than among controls. However, these differences were not statistically significant. Workers exposed to coffee dust reported more respiratory symptoms than did the controls. This might relate to their exposure to coffee dust. Interventions for reduction of dust levels and provision of respiratory protective equipment are recommended.

Dust exposure and chronic respiratory symptoms among coffee curing workers in Kilimanjaro: a cross sectional study

PubMed Central

2011-01-01

Background Coffee processing causes organic dust exposure which may lead to development of respiratory symptoms. Previous studies have mainly focused on workers involved in roasting coffee in importing countries. This study was carried out to determine total dust exposure and respiratory health of workers in Tanzanian primary coffee-processing factories. Methods A cross sectional study was conducted among 79 workers in two coffee factories, and among 73 control workers in a beverage factory. Personal samples of total dust (n = 45 from the coffee factories and n = 19 from the control factory) were collected throughout the working shift from the breathing zone of the workers. A questionnaire with modified questions from the American Thoracic Society questionnaire was used to assess chronic respiratory symptoms. Differences between groups were tested by using independent t-tests and Chi square tests. Poisson Regression Model was used to estimate prevalence ratio, adjusting for age, smoking, presence of previous lung diseases and years worked in dusty factories. Results All participants were male. The coffee workers had a mean age of 40 years and were older than the controls (31 years). Personal total dust exposure in the coffee factories were significantly higher than in the control factory (geometric mean (GM) 1.23 mg/m3, geometric standard deviation (GSD) (0.8) vs. 0.21(2.4) mg/m3). Coffee workers had significantly higher prevalence than controls for cough with sputum (23% vs. 10%; Prevalence ratio (PR); 2.5, 95% CI 1.0 - 5.9) and chest tightness (27% vs. 13%; PR; 2.4, 95% CI 1.1 - 5.2). The prevalence of morning cough, cough with and without sputum for 4 days or more in a week was also higher among coffee workers than among controls. However, these differences were not statistically significant. Conclusion Workers exposed to coffee dust reported more respiratory symptoms than did the controls. This might relate to their exposure to coffee dust. Interventions for reduction of dust levels and provision of respiratory protective equipment are recommended. PMID:22114929

Affective Beliefs Influence the Experience of Eating Meat

PubMed Central

Anderson, Eric C.; Barrett, Lisa Feldman

2016-01-01

People believe they experience the world objectively, but research continually demonstrates that beliefs influence perception. Emerging research indicates that beliefs influence the experience of eating. In three studies, we test whether beliefs about how animals are raised can influence the experience of eating meat. Samples of meat were paired with descriptions of animals raised on factory farms or raised on humane farms. Importantly, the meat samples in both conditions were identical. However, participants experienced the samples differently: meat paired with factory farm descriptions looked, smelled, and tasted less pleasant. Even basic properties of flavor were influenced: factory farmed samples tasted more salty and greasy. Finally, actual behavior was influenced: participants consumed less when samples were paired with factory farm descriptions. These findings demonstrate that the experience of eating is not determined solely by physical properties of stimuli—beliefs also shape experience. PMID:27556643

Smart factory in the context of 4th industrial revolution: challenges and opportunities for Romania

NASA Astrophysics Data System (ADS)

Pîrvu, B. C.; Zamfirescu, C. B.

2017-08-01

Manufacturing companies, independent of operation sector and size, must be able to produce lot size one products, just-in-time at a competitive cost. Coping with this high adaptability and short reaction times proves to be very challenging. New approaches must be taken into consideration for designing modular, intelligent and cooperative production systems which are easy to integrate with the entire factory. The coined term for this network of intelligent interacting artefacts system is cyber-physical systems (CPS). CPS is often used in the context of Industry 4.0 - or what many consider the forth industrial revolution. The paper presents an overview of key technological and social requirements to map the Smart Factory vision into reality. Finally, global and Romanian specific challenges hindering the vision of a true Smart Factory to become reality are presented.

Exposure to firework chemicals from production factories in pregnant women and risk of preterm birth occurrence in Liuyang, China.

PubMed

Li, Xun; Tan, Hongzhuan; Luo, Meiling; Wu, Xinrui; Huang, Xin; Zhou, Shujin; Shen, Lin; He, Yue; Liu, Yi; Hu, Li; Chen, Mengshi; Hu, Shimin; Wen, Shi Wu

2018-01-01

In the production of fireworks, various pollutants including particles of metals and organic compounds are released into the environment. Although the adverse effects of these air pollutants are known, the impact on pregnant women residing in this area remains to be determined. The aim of this study was to examine the association between maternal exposure to fireworks production chemicals and frequency of preterm birth in Liuyang, China. Maternal exposure to fireworks production was estimated at the residential district level and assessed using factory density, which was defined as the number of fireworks factories per 1000 residents in each district. The association of maternal exposure to particulates released from fireworks production plants with frequency of preterm birth was determined using data obtained from a cohort study conducted in Liuyang, China. Data were analyzed utilizing linear regression and logistic regression. There was no significant association between factory density and spontaneous preterm or medically induced preterm birth. Unexpectedly, pregnant women residing in areas with higher density of fireworks factories were at a reduced risk of preterm premature rupture of membranes (PPROM). Data demonstrated that residential density of fireworks factories appeared to be negatively correlated with preterm birth rate as evidenced by PPROM. At present, it is difficult to reconcile the inverse relationship between firework chemical exposure and frequency of preterm births as ambient particulate inhalation is known to adversely affect preterm birth occurrence.

Occupational carprofen photoallergic contact dermatitis.

PubMed

Kerr, A C; Muller, F; Ferguson, J; Dawe, R S

2008-12-01

The nonsteroidal anti-inflammatory drug carprofen was used in humans in the 1980s, before its withdrawal due to adverse effects. It re-emerged for veterinary uses, for which it is still widely prescribed, in the 1990s. There has been one previous report published of photoallergic contact dermatitis (PACD) in a pharmaceutical factory worker exposed to carprofen. Investigation of carprofen as a cause of PACD in pharmaceutical factory workers presenting with facial dermatitis. Photopatch testing to carprofen dilutions in two pharmaceutical factory workers and three healthy volunteer controls using the European consensus methodology. This was followed by testing of eight further employees, referred by occupational health services, in the same factory. The index patient suspected a problem with carprofen and was found to have PACD to carprofen. The second patient presented with a widespread, although especially photoexposed site, dermatitis and was initially labelled as having an 'unclassified dermatitis'. Only subsequently was her exposure (indirect; she did not work in the packaging section of the factory like the first patient) to carprofen recognized and testing confirmed both contact allergy and PACD to carprofen. One of three healthy volunteer controls had an active photoallergy sensitization event to carprofen starting 10 days after photopatch testing. Three of eight factory employees subsequently referred because of skin problems had carprofen PACD. Carprofen is a potent photoallergen. These cases emphasize the importance of photopatch testing, and considering agents not included in standard series, when investigating patients presenting with a photoexposed site dermatitis.

Prevalence of Listeria monocytogenes in Retail Lightly Pickled Vegetables and Its Successful Control at Processing Plants.

PubMed

Taguchi, Masumi; Kanki, Masashi; Yamaguchi, Yuko; Inamura, Hideichi; Koganei, Yosuke; Sano, Tetsuya; Nakamura, Hiromi; Asakura, Hiroshi

2017-03-01

Incidences of food poisoning traced to nonanimal food products have been increasingly reported. One of these was a recent large outbreak of Shiga toxin-producing Escherichia coli (STEC) O157 infection from the consumption of lightly pickled vegetables, indicating the necessity of imposing hygienic controls during manufacturing. However, little is known about the bacterial contamination levels in these minimally processed vegetables. Here we examined the prevalence of STEC, Salmonella spp., and Listeria monocytogenes in 100 lightly pickled vegetable products manufactured at 55 processing factories. Simultaneously, we also performed quantitative measurements of representative indicator bacteria (total viable counts, coliform counts, and β-glucuronidase-producing E. coli counts). STEC and Salmonella spp. were not detected in any of the samples; L. monocytogenes was detected in 12 samples manufactured at five of the factories. Microbiological surveillance at two factories (two surveys at factory A and three surveys at factory B) between June 2014 and January 2015 determined that the areas predominantly contaminated with L. monocytogenes included the refrigerators and packaging rooms. Genotyping provided further evidence that the contaminants found in these areas were linked to those found in the final products. Taken together, we demonstrated the prevalence of L. monocytogenes in lightly pickled vegetables sold at the retail level. Microbiological surveillance at the manufacturing factories further clarified the sources of the contamination in the retail products. These data indicate the necessity of implementing adequate monitoring programs to minimize health risks attributable to the consumption of these minimally processed vegetables.

Kinetic models in industrial biotechnology - Improving cell factory performance.

PubMed

Almquist, Joachim; Cvijovic, Marija; Hatzimanikatis, Vassily; Nielsen, Jens; Jirstrand, Mats

2014-07-01

An increasing number of industrial bioprocesses capitalize on living cells by using them as cell factories that convert sugars into chemicals. These processes range from the production of bulk chemicals in yeasts and bacteria to the synthesis of therapeutic proteins in mammalian cell lines. One of the tools in the continuous search for improved performance of such production systems is the development and application of mathematical models. To be of value for industrial biotechnology, mathematical models should be able to assist in the rational design of cell factory properties or in the production processes in which they are utilized. Kinetic models are particularly suitable towards this end because they are capable of representing the complex biochemistry of cells in a more complete way compared to most other types of models. They can, at least in principle, be used to in detail understand, predict, and evaluate the effects of adding, removing, or modifying molecular components of a cell factory and for supporting the design of the bioreactor or fermentation process. However, several challenges still remain before kinetic modeling will reach the degree of maturity required for routine application in industry. Here we review the current status of kinetic cell factory modeling. Emphasis is on modeling methodology concepts, including model network structure, kinetic rate expressions, parameter estimation, optimization methods, identifiability analysis, model reduction, and model validation, but several applications of kinetic models for the improvement of cell factories are also discussed. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Long-term effects of a factory closure: unemployment and disability during ten years' follow-up.

PubMed

Westin, S; Schlesselman, J J; Korper, M

1989-01-01

The consequences of a factory closure on future employment, disability and death were investigated in a 10-year prospective follow-up study in a general practice setting. The study population consisted of 85 persons who lost their jobs when a brisling sardine factory close to Bergen in Norway was shut down in 1975. The employees of a nearby "sister factory" within the same company were chosen as a control population, consisting of 87 persons. After the factory closure, the annual employment rate of the study group showed a steady rise to a maximum level of 44% within 6 years, but even after 10 years never matched the employment rate of the controls. The cumulative rates of disability pension, granted for medical conditions only, was more than three times higher in the study group than among controls from the second through the fourth year of follow-up. This excess of disabilities then stayed relatively constant at approximately 17 per 100 persons from 5 to 10 years after the shut-down. Given present days' unemployment, the results of this investigation point to the importance of acknowledging a long-term effect of job-loss on health and social readjustment.

A distribution-free multi-factorial profiler for harvesting information from high-density screenings.

PubMed

Besseris, George J

2013-01-01

Data screening is an indispensable phase in initiating the scientific discovery process. Fractional factorial designs offer quick and economical options for engineering highly-dense structured datasets. Maximum information content is harvested when a selected fractional factorial scheme is driven to saturation while data gathering is suppressed to no replication. A novel multi-factorial profiler is presented that allows screening of saturated-unreplicated designs by decomposing the examined response to its constituent contributions. Partial effects are sliced off systematically from the investigated response to form individual contrasts using simple robust measures. By isolating each time the disturbance attributed solely to a single controlling factor, the Wilcoxon-Mann-Whitney rank stochastics are employed to assign significance. We demonstrate that the proposed profiler possesses its own self-checking mechanism for detecting a potential influence due to fluctuations attributed to the remaining unexplainable error. Main benefits of the method are: 1) easy to grasp, 2) well-explained test-power properties, 3) distribution-free, 4) sparsity-free, 5) calibration-free, 6) simulation-free, 7) easy to implement, and 8) expanded usability to any type and size of multi-factorial screening designs. The method is elucidated with a benchmarked profiling effort for a water filtration process.

Manufacturing data analytics using a virtual factory representation.

PubMed

Jain, Sanjay; Shao, Guodong; Shin, Seung-Jun

2017-01-01

Large manufacturers have been using simulation to support decision-making for design and production. However, with the advancement of technologies and the emergence of big data, simulation can be utilised to perform and support data analytics for associated performance gains. This requires not only significant model development expertise, but also huge data collection and analysis efforts. This paper presents an approach within the frameworks of Design Science Research Methodology and prototyping to address the challenge of increasing the use of modelling, simulation and data analytics in manufacturing via reduction of the development effort. The use of manufacturing simulation models is presented as data analytics applications themselves and for supporting other data analytics applications by serving as data generators and as a tool for validation. The virtual factory concept is presented as the vehicle for manufacturing modelling and simulation. Virtual factory goes beyond traditional simulation models of factories to include multi-resolution modelling capabilities and thus allowing analysis at varying levels of detail. A path is proposed for implementation of the virtual factory concept that builds on developments in technologies and standards. A virtual machine prototype is provided as a demonstration of the use of a virtual representation for manufacturing data analytics.

Reducing Sun Exposure for Prevention of Skin Cancers: Factorial Invariance and Reliability of the Self-Efficacy Scale for Sun Protection

PubMed Central

Babbin, Steven F.; Yin, Hui-Qing; Rossi, Joseph S.; Redding, Colleen A.; Paiva, Andrea L.; Velicer, Wayne F.

2015-01-01

The Self-Efficacy Scale for Sun Protection consists of two correlated factors with three items each for Sunscreen Use and Avoidance. This study evaluated two crucial psychometric assumptions, factorial invariance and scale reliability, with a sample of adults (N = 1356) participating in a computer-tailored, population-based intervention study. A measure has factorial invariance when the model is the same across subgroups. Three levels of invariance were tested, from least to most restrictive: (1) Configural Invariance (nonzero factor loadings unconstrained); (2) Pattern Identity Invariance (equal factor loadings); and (3) Strong Factorial Invariance (equal factor loadings and measurement errors). Strong Factorial Invariance was a good fit for the model across seven grouping variables: age, education, ethnicity, gender, race, skin tone, and Stage of Change for Sun Protection. Internal consistency coefficient Alpha and factor rho scale reliability, respectively, were .84 and .86 for Sunscreen Use, .68 and .70 for Avoidance, and .78 and .78 for the global (total) scale. The psychometric evidence demonstrates strong empirical support that the scale is consistent, has internal validity, and can be used to assess population-based adult samples. PMID:26457203

An Application of Fractional Factorial Designs to Study Drug Combinations

PubMed Central

Jaynes, Jessica; Ding, Xianting; Xu, Hongquan; Wong, Weng Kee; Ho, Chih-Ming

2013-01-01

Herpes simplex virus type 1 (HSV-1) is known to cause diseases of various severities. There is increasing interest to find drug combinations to treat HSV-1 by reducing drug resistance and cytotoxicity. Drug combinations offer potentially higher efficacy and lower individual drug dosage. In this paper, we report a new application of fractional factorial designs to investigate a biological system with HSV-1 and six antiviral drugs, namely, Interferon-alpha, Interferon-beta, Interferon-gamma, Ribavirin, Acyclovir, and TNF-alpha. We show how the sequential use of two- and three-level fractional factorial designs can screen for important drugs and drug interactions, as well as determine potential optimal drug dosages through the use of contour plots. Our initial experiment using a two-level fractional factorial design suggests that there is model inadequacy and drug dosages should be reduced. A follow-up experiment using a blocked three-level fractional factorial design indicates that TNF-alpha has little effect and HSV-1 infection can be suppressed effectively by using a right combination of the other five antiviral drugs. These observations have practical implications in the understanding of antiviral drug mechanism that can result in better design of antiviral drug therapy. PMID:22859316

A Distribution-Free Multi-Factorial Profiler for Harvesting Information from High-Density Screenings

PubMed Central

Besseris, George J.

2013-01-01

Data screening is an indispensable phase in initiating the scientific discovery process. Fractional factorial designs offer quick and economical options for engineering highly-dense structured datasets. Maximum information content is harvested when a selected fractional factorial scheme is driven to saturation while data gathering is suppressed to no replication. A novel multi-factorial profiler is presented that allows screening of saturated-unreplicated designs by decomposing the examined response to its constituent contributions. Partial effects are sliced off systematically from the investigated response to form individual contrasts using simple robust measures. By isolating each time the disturbance attributed solely to a single controlling factor, the Wilcoxon-Mann-Whitney rank stochastics are employed to assign significance. We demonstrate that the proposed profiler possesses its own self-checking mechanism for detecting a potential influence due to fluctuations attributed to the remaining unexplainable error. Main benefits of the method are: 1) easy to grasp, 2) well-explained test-power properties, 3) distribution-free, 4) sparsity-free, 5) calibration-free, 6) simulation-free, 7) easy to implement, and 8) expanded usability to any type and size of multi-factorial screening designs. The method is elucidated with a benchmarked profiling effort for a water filtration process. PMID:24009744

[Status of lead exposure and its impact on health of workers in an accumulator factory].

PubMed

Liang, Jiabin; Zhang, Jian; Guo, Xiaojing; Mai, Jianping; Wang, Zhi; Liu, Yimin

2014-02-01

To identify the occupational hazard factors in an accumulator factory, to analyze the status of internal and external lead exposure and evaluate the impact of lead exposure on the health of workers in the accumulator industry, and to provide a theoretical basis for improved lead exposure criteria and technical support for the control of lead contamination in the accumulator industry. An on-site investigation was carried out to monitor and evaluate the lead fume and dust in the workplaces of an accumulator factory, and occupational health examination was performed in all workers. The occupational hazard safeguards in the accumulator factory were unadvanced. The contamination of lead fume and dust was serious. The abnormal rate of blood lead was up to 79.80%, and many workers developed anemia and mild peripheral nerve disease. Lead contamination is serious in the accumulator factory, leading to poor health of workers. It is essential to take effective control measures, improve the working environment, provide occupational health education, increase workers' self-protection awareness, and periodically conduct occupational hazard monitoring and health surveillance. The government must reinforce occupational health supervision of such enterprises.

Tuberculosis in the workplace: developing partnerships with the garment industries in Bangladesh.

PubMed

Zafar Ullah, A N; Huque, R; Husain, A; Akter, S; Akter, H; Newell, J N

2012-12-01

To implement and evaluate a public-private partnership model involving garment factories to reduce the tuberculosis (TB) burden in this workforce. We used operational research to develop and evaluate a mechanism for effective and sustainable TB control in workplaces in three areas of Dhaka, Bangladesh. Strategies, protocols, guides and tools were developed with stakeholders. We assessed the impact of the project using quantitative and qualitative measures: changes in TB outcomes were calculated using standard indicators based on factory and DOTS centre records; changes in TB care-seeking behaviour were assessed using qualitative in-depth interviews with factory managers and medical personnel, and focus group discussions with factory workers, including TB patients. The project brought positive changes in knowledge, attitudes and practices of managers, workers and health care providers on TB care and control. During 2008-2010, a total of 3372 workers from a workforce of 69,000 were referred for sputum microscopy and 598 were diagnosed with smear-positive TB, 145 of whom received care at their workplace. The overall treatment success rate was 100%. It is feasible to engage factories in TB control activities in Bangladesh, and thereby increase case notifications and improve treatment outcomes.

Biological monitoring as proficient assessment method in chronic exposure to irritating gases and vapors.

PubMed

Szász, Zsuzsánna; Abrám, Z; Szász, L; Moldovan, H; Demeter, Annamária

2013-01-01

Air pollution and its adverse health effect represent a global issue. Long term or permanent exposure at low doses of toxic material may increase the number of new appeared severe respiratory diseases and may aggravate most of the existing chronic cases. In the present study, the main toxic aerosols released by the greatest chemical factory in Transylvania were analyzed and their health impacts were measured. We have used in our trial biologic monitoring 1786 employees from a chemical factory in a transversal descriptive study. In the same time, we have noticed environmental determination of air quality and also, we have checked the health status and other 90 cases from a nonchemical factory. In this factory there are also pneumotrop harms. Results of our study give useful information regarding workers health status, with possibility to make pollution-medical condition association: there was no significant association between occurrence of decreased lung function tests and exposure of chemical irritants compared to the second investigated factory. Exposure to pneumotrope hazards imposes safeguards to protect health and biological monitoring has proven absolutely necessary to do so. Last but not least, lifestyle monitoring is to be effective.

"Controlling ourselves, by ourselves": risk assemblages on Malaysia's assembly lines.

PubMed

Root, Robin

2008-01-01

Since the early 1990s, the Malaysian government has identified factories as high risk for HIV and AIDS. Signaling epidemiological concerns over the rising rates of HIV among factory workers, a significant proportion of whom are women, the label also appeared to reconstitute stereotypes of factory women as dangerously sexual and of factories as immoral spaces. Drawing on ethnographic research in the export processing zones of Penang, Malaysia in the mid-1990s, I examine the meanings and experiences of HIV risk among factory women themselves. Data were analyzed using discourse and grounded theory methods, the former to identify women's multiple modes of rationalizing HIV risks, and the latter to theorize the sources and significance of women's HIV risk assemblages. The heuristic of assemblages as localized knowledge spaces helped to show that biomedical and socioreligious risk lexica operated not as fixed epistemological categories but as situational resources in women's risk scripts. Overall, women desired multiple risk knowledges to help them "control themselves by themselves," a project of reflexive self-shaping mediated by the diverse and discordant discourses of gender, ethnicity, and modernity in Malaysia that shaped how HIV risks were engendered and experienced.

7. Historic American Buildings Survey Photocopy taken from Sanborn Map ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Historic American Buildings Survey Photocopy taken from Sanborn Map at Assessor's Office City-County Building, Indianapolis, Indiana PLAN OF FACTORY - Duesenberg Automobile Company Factory, West Washington & Harding Streets, Indianapolis, Marion County, IN

12. Historic American Buildings Survey, Stanley Jones, Photographer July 6, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Historic American Buildings Survey, Stanley Jones, Photographer July 6, 1936, copied from portrait, PORTRAIT OF WILLIAM HENRY 3RD, OWNER OF HENRY GUN FACTORY. - Henry Gun Factory, Belfast, Northampton County, PA

Slime Factory.

ERIC Educational Resources Information Center

Fowler, Marilyn L.

1992-01-01

Describes a classroom activity using slime, a colloid: it behaves like both a solid and liquid. Explains how slime can be produced from guar gum. An activity where students work in teams and become a slime factory is presented. (PR)

Web-enabling technologies for the factory floor: a web-enabling strategy for emanufacturing

NASA Astrophysics Data System (ADS)

Velez, Ricardo; Lastra, Jose L. M.; Tuokko, Reijo O.

2001-10-01

This paper is intended to address the different technologies available for Web-enabling of the factory floor. It will give an overview of the importance of Web-enabling of the factory floor, in the application of the concepts of flexible and intelligent manufacturing, in conjunction with e-commerce. As a last section, it will try to define a Web-enabling strategy for the application in eManufacturing. This is made under the scope of the electronics manufacturing industry, so every application, technology or related matter is presented under such scope.

Minutes of the Explosive Safety Seminar (18th) Held at San Antonio, Texas on 12-14 September 1978. Volume 2

DTIC Science & Technology

1978-09-14

AT THE PONT- DE -BUIS GUN-POWDER FACTORY ON 7TH AUGUST 1975 1089 Mr. Jean Quinchon EXPLOSIVE INCIDENT DURING DEMOLITION GROUND OPERATIONS 1097 Mr...OCCURRED AT THE PONT- DE -BUIS GUN-POWDER FACTORY ON 7TH AUGUST 1975 Mr. Jean Quinchon Societe Nationale Des Poudres Et Explosifs Paris, France The...Pont- de -Buis National Gun-Powder Factory in the department of Finistere was built in the reign of LOUIS XIV to supply the Brest naval dock-yards

Polychlorinated dibenzo-p-dioxins and dibenzofurans and their association with cancer mortality among workers in one automobile foundry factory.

PubMed

Wang, Lihua; Weng, Shaofan; Wen, Sheng; Shi, Tingming; Sun, Gangtao; Zeng, Yuyu; Qi, Cheng; Chen, Weihong

2013-01-15

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) have been reported as possible carcinogenic hazards to humans. However, epidemiological studies on their carcinogenic roles are limited. The current study was designed to determine the concentrations and characteristics of PCDD/Fs and evaluate their association with cancer mortality in exposed workers in one automobile foundry factory. PCDD/F levels in factory and surrounding environment were analyzed through air and settling dust sampling. The cancer mortalities among workers in this foundry factory were calculated using data from a cohort study. The results showed that the PCDD/F concentrations of air in workplace ranged 0.36-2.25 pg World Health Organization-Toxic Equivalent (WHO-TEQ) Nm(-3) (average 1.01 pg WHO-TEQ Nm(-3)), which were 1.16-7.26 times higher than those outside the factory. The PCDD/F concentrations of settling dust in the workplace ranged 3.34-18.64 pg WHO-TEQ g(-1) (average 8.25 pg WHO-TEQ g(-1)), which were lower than those just outside the factory (average 16.13 pg WHO-TEQ g(-1)). Furthermore, a cohort study of workers in this factory with average follow-up of 24.52 years showed that cancer was the leading cause of death, with significant elevated mortality (standardized mortality ratio (SMR)=1.70, 95% confidence interval (CI): 1.35-2.13) among workers, when compared with Chinese national mortality. The cancer mortality among front-line workers was increased significantly (adjusted relative risk (RR)=1.73, 95% CI: 1.14-2.60), particularly among melting and casting workers, when compared with that among assistant workers. Our results indicated that there was a dose-response relationship between PCDD/F exposure and cancer mortality among foundry workers. Copyright © 2012 Elsevier B.V. All rights reserved.

[Immunologic aspects of allergic diseases development in female workers of contemporary poultry factory].

PubMed

Rybakov, I D; Bakirov, A B; Masiagutova, L M

2009-01-01

The article presents results of immunologic parameters study in female workers of contemporary poultry factories. Occupational factors were proved to affect all immunity sections. The authors suggested coefficient to diagnose latent sensibilization.

Evaluation philosophy for shuttle launched payloads

NASA Technical Reports Server (NTRS)

Heuser, R. E.

1975-01-01

Potential benefits of factory-to-pad testing constitute major cost savings and increase test effectiveness. Overall flight performance will be improved. The factory-to-pad approach is compatible with space shuttle processing and the large space telescope program.

Training Workers for the Factory of the Future.

ERIC Educational Resources Information Center

Clancy, J. Anthony

1989-01-01

In the factory of the future, emphasis on quality and increased productivity creates a competitive advantage. People and computers work together in all major activities. Training is a major factor in creating that competitive advantage. (JOW)

A Critical Pedagogy of Recuperation

ERIC Educational Resources Information Center

Jaramillo, Nathalia E.; McLaren, Peter; Lazaro, Fernando

2011-01-01

Using the term "recuperation" from their experiences working alongside activists in the "occupied factories" of Argentina, the authors illustrate how "occupied spaces" were transformed into "recuperated" sites of pedagogical, cultural and artistic production. Focusing on the IMPA factory (Industrias…

Alternative Fuels Data Center: Hybrid and Plug-In Electric Vehicle

Science.gov Websites

components. In some cases, conversions can affect the vehicle's factory warranty. HEV conversions require which point the vehicle acts like an HEV. In some cases, conversions can affect the vehicle's factory

Condition and Health of Rufous Bush Robin (Cercotrichas galactotes) Nestlings in a Polluted Oasis Habitat in Southern Tunisia.

PubMed

Alaya-Ltifi, Leila; Hayder-Benyahya, Nawel; Selmi, Slaheddine

2015-06-01

We investigated whether the proximity to the Gabès-Ghannouche factory complex of phosphate treatment, in south-eastern Tunisia, was associated with notable changes in the condition and health of Rufous bush robin (Cercotrichas galactotes) nestlings hatched in the neighbouring oasis habitat. Results demonstrated that excrements of nestlings hatched in one oasis close to the factory complex contained higher concentrations of lead and zinc than the excrements of nestlings from one oasis situated 20 km away. Furthermore, when effects of age and nestling number in the nest were controlled, nestlings hatched near the factory complex showed reduced tarsus length, rectrix length, haematocrit level and haemoglobin concentration, but higher levels of fluctuating asymmetry compared to those from the more distant oasis. Overall, results suggest that the proximity to the factory complex was associated with increased exposure to metals and deterioration in nestling condition and development.

Application of biomass pyrolytic polygeneration technology using retort reactors.

PubMed

Yang, Haiping; Liu, Biao; Chen, Yingquan; Chen, Wei; Yang, Qing; Chen, Hanping

2016-01-01

To introduce application status and illustrate the good utilisation potential of biomass pyrolytic polygeneration using retort reactors, the properties of major products and the economic viability of commercial factories were investigated. The capacity of one factory was about 3000t of biomass per year, which was converted into 1000t of charcoal, 950,000Nm(3) of biogas, 270t of woody tar, and 950t of woody vinegar. Charcoal and fuel gas had LHV of 31MJ/kg and 12MJ/m(3), respectively, indicating their potential for use as commercial fuels. The woody tar was rich in phenols, while woody vinegar contained large quantities of water and acetic acid. The economic analysis showed that the factory using this technology could be profitable, and the initial investment could be recouped over the factory lifetime. This technology offered a promising means of converting abundant agricultural biomass into high-value products. Copyright © 2015 Elsevier Ltd. All rights reserved.

Quality of Life Among Thai Workers in Textile Dyeing Factories

PubMed Central

Kittipichai, Wirin; Arsa, Rattanaporn; Jirapongsuwan, Ann; Singhakant, Chatchawal

2015-01-01

The purpose of a cross-sectional study was to investigate factors influencing the quality of life among Thai workers in textile dyeing factories. Samples included 205 Thai workers from five textile dyeing factories located in the suburban area of Bangkok in Thailand. Data were collected with a self-administered questionnaire. Scales of the questionnaire had reliability coefficients ranging from 0.70–0.91. The results revealed that the overall quality of life among workers was most likely between good and moderate levels, and the percentage-mean score was 74.77. The seven factors associated with the overall quality of life were co-worker relationships, safety at work in the dimension of accident prevention, job characteristics, supervisory relationships, welfares, marital status, and physical environment. Furthermore, co-worker relationships, accident prevention, and marital status were three considerable predictors accounted for 23% of the variance in the overall quality of life among workers in textile dyeing factories. PMID:25948458

Factorial structure and psychometric properties of a brief version of the Reminiscence Functions Scale with Chinese older adults.

PubMed

Lou, Vivian W Q; Choy, Jacky C P

2014-05-01

The current study aims to examine the factorial structure and psychometric properties of a brief version of the Reminiscence Functions Scale (RFS), a 14-item assessment tool of reminiscence functions, with Chinese older adults. The scale, covering four reminiscence functions (boredom reduction, bitterness revival, problem solving, and identity) was translated from English into Chinese and administered to older adults (N=675). Confirmatory factor analysis and hierarchical confirmatory factor analysis were conducted to examine its factorial structure, and its psychometric properties and criterion validity were examined. Confirmatory factor analysis supports a second-order model comprising one second-order factor and four first-order factors of RFS. The Cronbach's alpha of the subscales ranged from 0.75 to 0.90. The brief RFS contains a second-order factorial structure. Its psychometric properties support it as a sound instrument for measuring reminiscence functions among Chinese older adults.

Examining robustness of model selection with half-normal and LASSO plots for unreplicated factorial designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jang, Dae -Heung; Anderson-Cook, Christine Michaela

When there are constraints on resources, an unreplicated factorial or fractional factorial design can allow efficient exploration of numerous factor and interaction effects. A half-normal plot is a common graphical tool used to compare the relative magnitude of effects and to identify important effects from these experiments when no estimate of error from the experiment is available. An alternative is to use a least absolute shrinkage and selection operation plot to examine the pattern of model selection terms from an experiment. We examine how both the half-normal and least absolute shrinkage and selection operation plots are impacted by the absencemore » of individual observations or an outlier, and the robustness of conclusions obtained from these 2 techniques for identifying important effects from factorial experiments. As a result, the methods are illustrated with 2 examples from the literature.« less

Treatment of dyeing wastewater by TiO2/H2O2/UV process: experimental design approach for evaluating total organic carbon (TOC) removal efficiency.

PubMed

Lee, Seung-Mok; Kim, Young-Gyu; Cho, Il-Hyoung

2005-01-01

Optimal operating conditions in order to treat dyeing wastewater were investigated by using the factorial design and responses surface methodology (RSM). The experiment was statistically designed and carried out according to a 22 full factorial design with four factorial points, three center points, and four axial points. Then, the linear and nonlinear regression was applied on the data by using SAS package software. The independent variables were TiO2 dosage, H2O2 concentration and total organic carbon (TOC) removal efficiency of dyeing wastewater was dependent variable. From the factorial design and responses surface methodology (RSM), maximum removal efficiency (85%) of dyeing wastewater was obtained at TiO2 dosage (1.82 gL(-1)), H2O2 concentration (980 mgL(-1)) for oxidation reaction (20 min).

Exploiting Self-organization in Bioengineered Systems: A Computational Approach.

PubMed

Davis, Delin; Doloman, Anna; Podgorski, Gregory J; Vargis, Elizabeth; Flann, Nicholas S

2017-01-01

The productivity of bioengineered cell factories is limited by inefficiencies in nutrient delivery and waste and product removal. Current solution approaches explore changes in the physical configurations of the bioreactors. This work investigates the possibilities of exploiting self-organizing vascular networks to support producer cells within the factory. A computational model simulates de novo vascular development of endothelial-like cells and the resultant network functioning to deliver nutrients and extract product and waste from the cell culture. Microbial factories with vascular networks are evaluated for their scalability, robustness, and productivity compared to the cell factories without a vascular network. Initial studies demonstrate that at least an order of magnitude increase in production is possible, the system can be scaled up, and the self-organization of an efficient vascular network is robust. The work suggests that bioengineered multicellularity may offer efficiency improvements difficult to achieve with physical engineering approaches.

Industrial systems biology and its impact on synthetic biology of yeast cell factories.

PubMed

Fletcher, Eugene; Krivoruchko, Anastasia; Nielsen, Jens

2016-06-01

Engineering industrial cell factories to effectively yield a desired product while dealing with industrially relevant stresses is usually the most challenging step in the development of industrial production of chemicals using microbial fermentation processes. Using synthetic biology tools, microbial cell factories such as Saccharomyces cerevisiae can be engineered to express synthetic pathways for the production of fuels, biopharmaceuticals, fragrances, and food flavors. However, directing fluxes through these synthetic pathways towards the desired product can be demanding due to complex regulation or poor gene expression. Systems biology, which applies computational tools and mathematical modeling to understand complex biological networks, can be used to guide synthetic biology design. Here, we present our perspective on how systems biology can impact synthetic biology towards the goal of developing improved yeast cell factories. Biotechnol. Bioeng. 2016;113: 1164-1170. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Examining robustness of model selection with half-normal and LASSO plots for unreplicated factorial designs

DOE PAGES

Jang, Dae -Heung; Anderson-Cook, Christine Michaela

2017-04-12

When there are constraints on resources, an unreplicated factorial or fractional factorial design can allow efficient exploration of numerous factor and interaction effects. A half-normal plot is a common graphical tool used to compare the relative magnitude of effects and to identify important effects from these experiments when no estimate of error from the experiment is available. An alternative is to use a least absolute shrinkage and selection operation plot to examine the pattern of model selection terms from an experiment. We examine how both the half-normal and least absolute shrinkage and selection operation plots are impacted by the absencemore » of individual observations or an outlier, and the robustness of conclusions obtained from these 2 techniques for identifying important effects from factorial experiments. As a result, the methods are illustrated with 2 examples from the literature.« less

[Crespi d'Adda: psychosocial risk factors in a late 19th century company town].

PubMed

Punzi, S

2012-01-01

Crespi d'Adda is a late 19th century company town established around a textile factory by Cristoforo Benigno Crespi and his son Silvio. It was an ideal model of company residency being a self-sufficient microcosm equipped with all the services needed by a community where the life of workers and their families was revolving around the factory and the working requirements. It was the expression of philanthropic and patronizing enlightened entrepreneurs at that time, committed in protecting workers' life inside and outside the factory, resulting into a more affectionate and productive manpower. Silvio Benigno Crespi developed an extensive activity to improve working conditions, with special reference to accident prevention and work-related diseases, as well as night work in factories, weekly day off, reduction of working hours: we can say that in some ways he was concerned also with psychosocial risks.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fontana, Juan; Lopez-Iglesias, Carmen; Tzeng, Wen-Ping

Viral factories are complex structures in the infected cell where viruses compartmentalize their life cycle. Rubella virus (RUBV) assembles factories by recruitment of rough endoplasmic reticulum (RER), mitochondria and Golgi around modified lysosomes known as cytopathic vacuoles or CPVs. These organelles contain active replication complexes that transfer replicated RNA to assembly sites in Golgi membranes. We have studied the structure of RUBV factory in three dimensions by electron tomography and freeze-fracture. CPVs contain stacked membranes, rigid sheets, small vesicles and large vacuoles. These membranes are interconnected and in communication with the endocytic pathway since they incorporate endocytosed BSA-gold. RER andmore » CPVs are coupled through protein bridges and closely apposed membranes. Golgi vesicles attach to the CPVs but no tight contacts with mitochondria were detected. Immunogold labelling confirmed that the mitochondrial protein p32 is an abundant component around and inside CPVs where it could play important roles in factory activities.« less

Long-term pulmonary complications of chemical weapons exposure in former poison gas factory workers.

PubMed

Nishimura, Yoshifumi; Iwamoto, Hiroshi; Ishikawa, Nobuhisa; Hattori, Noboru; Horimasu, Yasushi; Ohshimo, Shinichiro; Fujitaka, Kazunori; Kondo, Keiichi; Hamada, Hironobu; Awai, Kazuo; Kohno, Nobuoki

2016-07-01

Sulfur mustard (SM) and lewisite are vesicant chemical warfare agents that can cause skin blistering and chronic lung complications. During 1929-1945, a Japanese factory produced poisonous gases, which included SM, lewisite and other chemical weapons. The aim of this study was to investigate the chest computed tomography (CT) findings among long-term survivors who worked at this factory. During 2009-2012, we evaluated chest CT findings from 346 long-term survivors who worked at the poison gas factory. Skin lesions were used as an indicator of significant exposure to vesicant agents. Among the 346 individuals, 53 (15%) individuals experienced skin lesions while working at the factory, and chest CT revealed abnormal findings in 179 individuals (52%). Emphysema was the most common CT finding and was observed in 75 individuals (22%), while honeycombing was observed in 8 individuals (2%). Emphysema and honeycombing were more prevalent among individuals with skin lesions, compared to individuals without skin lesions. Multivariate analyses revealed significant associations between the presence of emphysema and skin lesions (p = 0.008). Among individuals who never smoked, individuals with skin lesions (n = 26) exhibited a significantly higher rate of emphysema, compared to individuals without skin lesions (n = 200) (35% versus 7%, respectively; p < 0.001). Among the long-term survivors who worked at the poison gas factory, a history of skin lesions was associated with the presence of emphysema, even among never smokers, which suggests that emphysema might be a long-term complication of exposure to chemical warfare agents.

Economic evaluation of factorial randomised controlled trials: challenges, methods and recommendations

PubMed Central

Gray, Alastair

2017-01-01

Increasing numbers of economic evaluations are conducted alongside randomised controlled trials. Such studies include factorial trials, which randomise patients to different levels of two or more factors and can therefore evaluate the effect of multiple treatments alone and in combination. Factorial trials can provide increased statistical power or assess interactions between treatments, but raise additional challenges for trial‐based economic evaluations: interactions may occur more commonly for costs and quality‐adjusted life‐years (QALYs) than for clinical endpoints; economic endpoints raise challenges for transformation and regression analysis; and both factors must be considered simultaneously to assess which treatment combination represents best value for money. This article aims to examine issues associated with factorial trials that include assessment of costs and/or cost‐effectiveness, describe the methods that can be used to analyse such studies and make recommendations for health economists, statisticians and trialists. A hypothetical worked example is used to illustrate the challenges and demonstrate ways in which economic evaluations of factorial trials may be conducted, and how these methods affect the results and conclusions. Ignoring interactions introduces bias that could result in adopting a treatment that does not make best use of healthcare resources, while considering all interactions avoids bias but reduces statistical power. We also introduce the concept of the opportunity cost of ignoring interactions as a measure of the bias introduced by not taking account of all interactions. We conclude by offering recommendations for planning, analysing and reporting economic evaluations based on factorial trials, taking increased analysis costs into account. © 2017 The Authors. Statistics in Medicine published by John Wiley & Sons Ltd. PMID:28470760

Planning for the semiconductor manufacturer of the future

NASA Technical Reports Server (NTRS)

Fargher, Hugh E.; Smith, Richard A.

1992-01-01

Texas Instruments (TI) is currently contracted by the Air Force Wright Laboratory and the Defense Advanced Research Projects Agency (DARPA) to develop the next generation flexible semiconductor wafer fabrication system called Microelectronics Manufacturing Science & Technology (MMST). Several revolutionary concepts are being pioneered on MMST, including the following: new single-wafer rapid thermal processes, in-situ sensors, cluster equipment, and advanced Computer Integrated Manufacturing (CIM) software. The objective of the project is to develop a manufacturing system capable of achieving an order of magnitude improvement in almost all aspects of wafer fabrication. TI was awarded the contract in Oct., 1988, and will complete development with a fabrication facility demonstration in April, 1993. An important part of MMST is development of the CIM environment responsible for coordinating all parts of the system. The CIM architecture being developed is based on a distributed object oriented framework made of several cooperating subsystems. The software subsystems include the following: process control for dynamic control of factory processes; modular processing system for controlling the processing equipment; generic equipment model which provides an interface between processing equipment and the rest of the factory; specification system which maintains factory documents and product specifications; simulator for modelling the factory for analysis purposes; scheduler for scheduling work on the factory floor; and the planner for planning and monitoring of orders within the factory. This paper first outlines the division of responsibility between the planner, scheduler, and simulator subsystems. It then describes the approach to incremental planning and the way in which uncertainty is modelled within the plan representation. Finally, current status and initial results are described.

Environmental Risk Assessment: Spatial Analysis of Chemical Hazards and Risks in South Korea

NASA Astrophysics Data System (ADS)

Yu, H.; Heo, S.; Kim, M.; Lee, W. K.; Jong-Ryeul, S.

2017-12-01

This study identified chemical hazard and risk levels in Korea by analyzing the spatial distribution of chemical factories and accidents. The number of chemical factories and accidents in 5-km2 grids were used as the attribute value for spatial analysis. First, semi-variograms were conducted to examine spatial distribution patterns and to identify spatial autocorrelation of chemical factories and accidents. Semi-variograms explained that the spatial distribution of chemical factories and accidents were spatially autocorrelated. Second, the results of the semi-variograms were used in Ordinary Kriging to estimate chemical hazard and risk level. The level values were extracted from the Ordinary Kriging result and their spatial similarity was examined by juxtaposing the two values with respect to their location. Six peaks were identified in both the hazard and risk estimation result, and the peaks correlated with major cities in Korea. Third, the estimated hazard and risk levels were classified with geometrical interval and could be classified into four quadrants: Low Hazard and Low Risk (LHLR), Low Hazard and High Risk (LHHR), High Hazard and Low Risk (HHLR), and High Hazard and High Risk (HHHR). The 4 groups identified different chemical safety management issues in Korea; relatively safe LHLR group, many chemical reseller factories were found in HHLR group, chemical transportation accidents were in the LHHR group, and an abundance of factories and accidents were in the HHHR group. Each quadrant represented different safety management obstacles in Korea, and studying spatial differences can support the establishment of an efficient risk management plan.

Factorial versus multi-arm multi-stage designs for clinical trials with multiple treatments.

PubMed

Jaki, Thomas; Vasileiou, Despina

2017-02-20

When several treatments are available for evaluation in a clinical trial, different design options are available. We compare multi-arm multi-stage with factorial designs, and in particular, we will consider a 2 × 2 factorial design, where groups of patients will either take treatments A, B, both or neither. We investigate the performance and characteristics of both types of designs under different scenarios and compare them using both theory and simulations. For the factorial designs, we construct appropriate test statistics to test the hypothesis of no treatment effect against the control group with overall control of the type I error. We study the effect of the choice of the allocation ratios on the critical value and sample size requirements for a target power. We also study how the possibility of an interaction between the two treatments A and B affects type I and type II errors when testing for significance of each of the treatment effects. We present both simulation results and a case study on an osteoarthritis clinical trial. We discover that in an optimal factorial design in terms of minimising the associated critical value, the corresponding allocation ratios differ substantially to those of a balanced design. We also find evidence of potentially big losses in power in factorial designs for moderate deviations from the study design assumptions and little gain compared with multi-arm multi-stage designs when the assumptions hold. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

Family context assessment in a public health study.

PubMed

Velasco, David; Sánchez de Miguel, Manuel; Egurza, Maitane; Arranz, Enrique; Aranbarri, Aritz; Fano, Eduardo; Ibarluzea, Jesús

2014-01-01

To analyze the factorial structure of a new instrument to assess the quality of the family context (Etxadi-Gangoiti Scale) in a sample from the Gipuzkoa cohort of the Environment and Childhood (Infancia y Medio Ambiente [INMA]) study. Families in a sample of 433 two-year-old children were assessed in a home visit with subsequent analysis of the factorial structure and psychometric properties of the data. An exploratory factorial analysis (principal axis factoring and varimax rotation) and a confirmatory factorial analysis were carried out; partial confirmation of the original factorial structure of the instrument was obtained, which revealed the following factorial structures. Subscale (1): promotion of cognitive and linguistic development, social skills, psychomotor skills, and pretend play and imitation; subscale (2): promotion of independence and self-esteem, provision of optimal frustration, social and emotional quality of the relationship, and absence of physical punishment; subscale (3): paternal involvement, low exposure to family conflict, low frequency of family conflict, relationship with the extended family, social support, diversity of experiences, low frequency of stressful events, and low parental perception of stress. The structure of the original instrument structure was partially confirmed, which was attributed to the characteristics of the sample. We stress the importance of the variability obtained in the evaluation of the families, as well as of adequate indicators of reliability in such evaluation. The new instrument could be used in public health to identify deficient family contexts and to design preventive interventions focused on parenting skills. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Use of the selective agar medium CREAD for monitoring the level of airborne spoilage moulds in cheese production.

PubMed

Kure, Cathrine Finne; Borch, Elisabeth; Karlsson, Ingela; Homleid, Jens Petter; Langsrud, Solveig

2008-02-29

It was investigated if a selective medium for common cheese spoiling moulds (CREAD) could give more relevant information than a general mould medium in hygienic air-sampling in cheese factories. A total of 126 air-samples were taken in six Nordic cheese factories using the general mould medium DG18 and CREAD. The level and genera of air-borne mould was determined. Identification to species-level was performed for a selection of samples. In five cheese factories the mycobiota was dominated by Penicillium spp. and in one cheese factory by Cladosporium spp. The concentration of air-borne moulds varied between the cheese factories ranging from 1 to 270 cfu/m3 on DG18 with a median value of 17. The number of mould colonies was in general lower at CREAD. Identification indicated that CREAD supported growth of common spoilage moulds for cheese, such as Penicillium palitans and P. commune. The mycobiota on DG18 also consisted of moulds not commonly associated with spoilage of cheese, such as Cladosporium spp., P. brevicompactum and P. chrysogenum. Contamination of cheese with mould is periodically a problem in production of semi-hard cheese and the level of air-borne mould is therefore routinely monitored in cheese factories. A clear correlation between the total number of moulds in air and mould growth on products is not always found. The conclusion from the investigation is that it is recommended to use a selective medium for cheese spoilage moulds, such as CREAD in hygienic monitoring.

78 FR 67116 - Aluminum Extrusions From the People's Republic of China: Notice of Partial Rescission of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... Xinlong Group Co., Ltd. Zhongshan Gold Mountain Aluminium Factory Ltd. (ZGM) \\7\\ \\7\\ In the Initiation... company name is spelled ``Zhongshan Gold Mountain Aluminium Factory Ltd.'' as indicated above. See Letter...

Factors affecting the incidence of first-quality wheels of Trentingrana cheese.

PubMed

Bittante, G; Cecchinato, A; Cologna, N; Penasa, M; Tiezzi, F; De Marchi, M

2011-07-01

Trentingrana (or Grana Trentino) is a Protected Designation of Origin hard cheese produced in the eastern Italian Alps by small cooperative dairy factories. To obtain the certification of quality, wheels are evaluated at 9±1 mo of ripening and those classified as first quality are revaluated at 18±1 mo. Traditionally, the assessment is based on 2 sensory features: namely, the external aspect of the wheel and the internal texture; the latter is evaluated through the sound produced by beating the wheel with a special hammer. Traits considered in the study were the percentage of first-quality wheels of total wheels examined at 9±1 (QW(9 mo)) and 18±1 (QW(18 mo)) mo of ripening, and their combination [i.e., the percentage of first-quality wheels at 18±1 mo of ripening of the number of wheels evaluated at 9±1 mo (QW(tot))]. The experimental unit was the batch of 2 mo of production of each of 10 cooperative dairy factories from 2002 to 2008. Data were analyzed with a model that included fixed effects of dairy factory, year and season of production, and interactions between dairy factory and year, and dairy factory and season. The coefficients of determination of the models were 0.57, 0.68, and 0.67 for QW(9mo), QW(18 mo), and QW(tot), respectively. All factors significantly influenced the traits, with dairy factory being the most important source of variation, followed by season and year of production. Remarkable differences were found between the best and the worst dairy factory for QW(9 mo) (11.5%), QW(18 mo) (21.1%), and QW(tot) (25.6%). The first 4 yr of production had a negative effect on the percentage of wheels labeled as first quality and QW(tot) decreased from 74 to 64%; nevertheless, a complete recovery was detected in the following years. The season of production strongly influenced the studied traits with the best results in spring and summer, and the worst in autumn and winter. Compared with average, the 3 best dairy factories were smaller, with smaller associated farms, and showed lower variation across years and seasons of production. Results support the relevance of routinely assessing and monitoring the quality of Trentingrana cheese. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Physicochemical and bacteriological quality of bottled drinking water in three sites of Amhara Regional State, Ethiopia.

PubMed

Biadglegne, Fantahun; Tessema, Belay; Kibret, Mulugeta; Abera, Bayeh; Huruy, Kahsay; Anagaw, Belay; Mulu, Andargachew

2009-10-01

The consumption of bottled drinking water is becoming increasing in Ethiopia. As a result there has been a growing concern about the chemical, physical and bacteriological quality of this product. Studies on the chemical, physical and bacteriological quality of bottled water is quite scarce in Ethiopia. This study was therefore aimed to assess the physicochemical and bacteriological qualities of three factories of bottled drinking water products produced in Amhara region. A Laboratory based comparative study was conducted to evaluate the physicochemical and bacteriological quality of three factories of bottled drinking water produced in Amhara region. Analysis on the quality of bottled drinking water from the sources, wholesalers and retailers were made with World Health Organization and Quality and Standards Authority of Ethiopia recommendations. Triplicate samples from three types of bottled drinking water were randomly collected and analyzed from June, 2006 to December, 2006. A total of 108 commercial bottled drinking water samples were analyzed. The result showed that except pH of factory A all the physicochemical parameters analyzed were with in the recommended limits. The pH value of factory A tested from sources is 5.3 and from wholesalers and retailers is 5.5 and 5.3, respectively, which is below the normal value set by World Health Organization (6.5-8.0) and Quality and Standards Authority of Ethiopia (6.0-8.5). Our analyses also demonstrated that 2 (16.7%) of the samples tested from sources and 1 (8.3%) from wholesalers of factory B were contaminated with total coliforms, where as 2 (16.7%) samples from retailers were also contaminated with total coliforms. On the other hand, 1 (8.3%) of the samples tested from wholesalers and 2 (16.7%) of the samples tested from retailers of factory A were also contaminated with total coliforms. Total coliforms were not detected from all samples of factory C, fecal coliforms were not also isolated from all samples. Percent of coefficient of variation showed that variations in total coliforms counts were significant with in the samples of both factory A and B (CV > 10%). Based on the recommended limit of World Health Organization and Quality and Standards Authority of Ethiopia, 7.4% of bottled drinking water sold commercially could be considered unfit for human consumption. Consumers of bottled water should be aware of this.

1. VIEW LOOKING SOUTHWEST AT PARTIAL EAST ELEVATION OF FACTORY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW LOOKING SOUTHWEST AT PARTIAL EAST ELEVATION OF FACTORY, SHOWING FORMER OHIO & ERIE CANAL PRISM IN FOREGROUND THAT WAS USED AS WATER RESERVOIR (500,000 GALLON) - Jaite Paper Mill, 1200 West Highland Road, Sagamore Hills, Summit County, OH

B factory plans at Cornell

NASA Astrophysics Data System (ADS)

Berkelman, Karl

1989-12-01

Recent upgrade project at the Cornell Electron Storage Ring is discussed. Modification was made to make B mesons factory design possible. The CLEO detector has been rebuilt with a new superconducting magnet and a high resolution electromagnetic calorimeter made of cesium iodide scintillators.(AIP)

Bioretention Systems: Partial Factorial Designs for Nitrate Removal

EPA Science Inventory

Changes in nutrient loadings are monitored by introducing captured stormwater runoff into eight outdoor rain gardens at EPA’s Urban Water Research Facility in Edison, New Jersey scaled for residential and urban landscapes. The partial factorial design includes non-vegetated meso...

Correlations and fluctuations: Generalized factorial moments

NASA Astrophysics Data System (ADS)

Bialas, A.

2007-02-01

A systematic study of the relations between fluctuations of the extensive multiparticle variables and integrals of the inclusive multiparticle densities is presented. The generalized factorial moments are introduced and their physical meaning discussed. The effects of the additive conservation laws are analyzed.

R&D Toward a Neutrino Factory and Muon Collider

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zisman, Michael S

2011-03-20

Significant progress has been made in recent years in R&D towards a neutrino factory and muon collider. The U.S. Muon Accelerator Program (MAP) has been formed recently to expedite the R&D efforts. This paper will review the U.S. MAP R&D programs for a neutrino factory and muon collider. Muon ionization cooling research is the key element of the program. The first muon ionization cooling demonstration experiment, MICE (Muon Ionization Cooling Experiment), is under construction now at RAL (Rutherford Appleton Laboratory) in the UK. The current status of MICE will be described.

On optimal control problem for conservation law modelling one class of highly re-entrant production systems

NASA Astrophysics Data System (ADS)

D'Apice, Ciro; Kogut, Peter I.

2017-07-01

We discuss the optimal control problem stated as the minimization in the L2-sense of the mismatch between the actual out-flux and a demand forecast for a hyperbolic conservation law that models a highly re-entrant production system. The output of the factory is described as a function of the work in progress and the position of the so-called push-pull point (PPP) where we separate the beginning of the factory employing a push policy from the end of the factory, which uses a pull policy.

Peak expiratory flow rate of children working in lock factories.

PubMed

Singhal, S; Singhal, A; Singh, P N; Agarwal, D K; Gulati, R

2006-01-01

Peak expiratory flow rate (PEFR) of 106 children working in different units of lock factory was measured and compared with age and sex matched control group of same socio-economic status children. All the children worked for about ten hours per day. It was observed that there was a significant decrease in PEFR of children working in the different units of lock factories i.e. Hand press, Polishing, Lock fitting, Lock packing units as compared to control group (P>0.001). The reduction percentage of PEFR was maximum in children working in polishing unit (25.48%).

n-Hexane polyneuropathy in a ball-manufacturing factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, C.C.; Shih, T.S.; Cheng, S.Y.

Five overt and two occult cases of n-hexane polyneuropathy occurred in a ball-manufacturing factory in Taiwan. The severity of polyneuropathy was directly related to the index of n-hexane exposure that occurred during the processes of cement coating and nylon fiber winding in a poorly ventilated room. The n-hexane concentrations over eight hours of personal sampling of the air of the cement coating and nylon fiber winding areas were 109 ppm and 86 ppm, respectively. After installation of a new factory ventilation system, these seven patients recovered completely, and there were no new cases in the two-year follow-up.

16. SOUTH TO VIEW OF CIRCA 1900 MICHIGAN MACHINERY MFG. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. SOUTH TO VIEW OF CIRCA 1900 MICHIGAN MACHINERY MFG. CO. PUNCH PRESS WITH WOOD-BURNING HEATING STOVE LOCATED IN THE CENTER OF THE FACTORY BUILDING. BESIDE THE HEATING STOVE, POINTING TOWARD THE PUNCH PRESS, IS A JIG USED TO POSITION ANGLE STEEL COMPONENTS OF STEEL WINDMILL TOWER LEGS FOR PUNCHING BOLT HOLES. THE SUPPORT FOR THE BRICK FLUE OF THE HEATING STOVE IS CONSTRUCTED FROM SALVAGED GALVANIZED ANGLE STEEL OF THE TYPE USED IN FABRICATING WINDMILL TOWERS MANUFACTURED IN THE FACTORY. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

Environmental sampling of lead near a battery reprocessing factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leung, H.W.

1988-09-01

Exposed workers in lead smelting plants and lead storage battery factories have reported illnesses related to inhalation of lead oxide fumes. The residential community of La Gloria, a town of about 15,000 people located approximately 13 km southwest of Tijuana, Baja California, Mexico was an area where residents were concerned about possible health effects and environmental contamination from lead due to the proximity of battery factory that used lead oxide in the battery grid separation procedure. This study was undertaken to investigate the lead levels in the soil, plant and water collected in various areas around this battery reprocessing plant.

Mobile Monitoring and Embedded Control System for Factory Environment

PubMed Central

Lian, Kuang-Yow; Hsiao, Sung-Jung; Sung, Wen-Tsai

2013-01-01

This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine) core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT) approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC) technology is used to carry out the actual electricity load experiments using smart phones. PMID:24351642

Mobile monitoring and embedded control system for factory environment.

PubMed

Lian, Kuang-Yow; Hsiao, Sung-Jung; Sung, Wen-Tsai

2013-12-17

This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine) core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT) approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC) technology is used to carry out the actual electricity load experiments using smart phones.

A trial of production of the plant-derived high-value protein in a plant factory: photosynthetic photon fluxes affect the accumulation of recombinant miraculin in transgenic tomato fruits.

PubMed

Kato, Kazuhisa; Maruyama, Shinichiro; Hirai, Tadayoshi; Hiwasa-Tanase, Kyoko; Mizoguchi, Tsuyoshi; Goto, Eiji; Ezura, Hiroshi

2011-08-01

One of the ultimate goals of plant science is to test a hypothesis obtained by basic science and to apply it to agriculture and industry. A plant factory is one of the ideal systems for this trial. Environmental factors affect both plant yield and the accumulation of recombinant proteins for industrial applications within transgenic plants. However, there have been few reports studying plant productivity for recombinant protein in closed cultivation systems called plant factories. To investigate the effects of photosynthetic photon flux (PPF) on tomato fruit yield and the accumulation of recombinant miraculin, a taste-modifying glycoprotein, in transgenic tomato fruits, plants were cultivated at various PPFs from 100 to 400 (µmol m(-2) s(-)1) in a plant factory. Miraculin production per unit of energy used was highest at PPF100, although miraculin production per unit area was highest at PPF300. The commercial productivity of recombinant miraculin in transgenic tomato fruits largely depended on light conditions in the plant factory. Our trial will be useful to consider the trade-offs between the profits from production of high-value materials in plants and the costs of electricity.

Exploring time series retrieved from cardiac implantable devices for optimizing patient follow-up

PubMed Central

Guéguin, Marie; Roux, Emmanuel; Hernández, Alfredo I; Porée, Fabienne; Mabo, Philippe; Graindorge, Laurence; Carrault, Guy

2008-01-01

Current cardiac implantable devices (ID) are equipped with a set of sensors that can provide useful information to improve patient follow-up and to prevent health deterioration in the postoperative period. In this paper, data obtained from an ID with two such sensors (a transthoracic impedance sensor and an accelerometer) are analyzed in order to evaluate their potential application for the follow-up of patients treated with a cardiac resynchronization therapy (CRT). A methodology combining spatio-temporal fuzzy coding and multiple correspondence analysis (MCA) is applied in order to: i) reduce the dimensionality of the data and provide new synthetic indices based on the “factorial axes” obtained from MCA, ii) interpret these factorial axes in physiological terms and iii) analyze the evolution of the patient’s status by projecting the acquired data into the plane formed by the first two factorial axes named “factorial plane”. In order to classify the different evolution patterns, a new similarity measure is proposed and validated on simulated datasets, and then used to cluster observed data from 41 CRT patients. The obtained clusters are compared with the annotations on each patient’s medical record. Two areas on the factorial plane are identified, one being correlated with a health degradation of patients and the other with a stable clinical state. PMID:18838359

Multilevel Factorial Experiments for Developing Behavioral Interventions: Power, Sample Size, and Resource Considerations†

PubMed Central

Dziak, John J.; Nahum-Shani, Inbal; Collins, Linda M.

2012-01-01

Factorial experimental designs have many potential advantages for behavioral scientists. For example, such designs may be useful in building more potent interventions, by helping investigators to screen several candidate intervention components simultaneously and decide which are likely to offer greater benefit before evaluating the intervention as a whole. However, sample size and power considerations may challenge investigators attempting to apply such designs, especially when the population of interest is multilevel (e.g., when students are nested within schools, or employees within organizations). In this article we examine the feasibility of factorial experimental designs with multiple factors in a multilevel, clustered setting (i.e., of multilevel multifactor experiments). We conduct Monte Carlo simulations to demonstrate how design elements such as the number of clusters, the number of lower-level units, and the intraclass correlation affect power. Our results suggest that multilevel, multifactor experiments are feasible for factor-screening purposes, because of the economical properties of complete and fractional factorial experimental designs. We also discuss resources for sample size planning and power estimation for multilevel factorial experiments. These results are discussed from a resource management perspective, in which the goal is to choose a design that maximizes the scientific benefit using the resources available for an investigation. PMID:22309956

Measurement of 238U and 232Th radionuclides in ilmenite and synthetic rutile

NASA Astrophysics Data System (ADS)

Idris, M. I.; Siong, K. K.; Fadzil, S. M.

2018-01-01

The only factory that currently processes ilmenite to produce synthetic rutile is Tor Minerals in Ipoh, Perak, Malaysia. These two minerals contain radioactive elements such as uranium and thorium. Furthermore, this factory was built close to the residential areas. Thus, the primary issues are radiation exposure attributed to the decay of the radionuclides. Hence, the objectives of this study are to measure the dose and to evaluate activity levels of uranium and thorium. Dose rates from surrounding area of factory indicate the normal range for both on the surface and 1 meter above the ground (0.3-0.7 μSv/hr) lower than the global range of 0.5-1.3 μSv/hr set by UNSCEAR. The mean activity levels of uranium and thorium for ilmenite are 235 Bq/kg and 503 Bq/kg while for synthetic rutile are 980 Bq/kg and 401 Bq/kg, respectively. The result shows that uranium activity levels of synthetic rutile is 4 times higher than ilmenite but it is still lower than the regulatory exemption limit of 1000 Bq/kg set by IAEA Basic Safety Standards. Even though the dose rates at the factory and the activity levels are within safe limits, safety precautions must be followed by the factory management to prevent any unwanted accident to occur.

Engineering tolerance to industrially relevant stress factors in yeast cell factories.

PubMed

Deparis, Quinten; Claes, Arne; Foulquié-Moreno, Maria R; Thevelein, Johan M

2017-06-01

The main focus in development of yeast cell factories has generally been on establishing optimal activity of heterologous pathways and further metabolic engineering of the host strain to maximize product yield and titer. Adequate stress tolerance of the host strain has turned out to be another major challenge for obtaining economically viable performance in industrial production. Although general robustness is a universal requirement for industrial microorganisms, production of novel compounds using artificial metabolic pathways presents additional challenges. Many of the bio-based compounds desirable for production by cell factories are highly toxic to the host cells in the titers required for economic viability. Artificial metabolic pathways also turn out to be much more sensitive to stress factors than endogenous pathways, likely because regulation of the latter has been optimized in evolution in myriads of environmental conditions. We discuss different environmental and metabolic stress factors with high relevance for industrial utilization of yeast cell factories and the experimental approaches used to engineer higher stress tolerance. Improving stress tolerance in a predictable manner in yeast cell factories should facilitate their widespread utilization in the bio-based economy and extend the range of products successfully produced in large scale in a sustainable and economically profitable way. © FEMS 2017.

The effects of outsourcing on occupational health and safety: a comparative study of factory-based workers and outworkers in the Australian clothing industry.

PubMed

Mayhew, C; Quinlan, M

1999-01-01

Outsourcing has become increasingly widespread throughout industrialized societies over the past 20 years. Accompanying this has been a renewed growth in home-based work, sometimes using new technologies (telework) but also entailing a re-emergence of old forms, such as clothing outwork, used extensively 100 years ago. A growing body of research indicates that changes to work organization associated with outsourcing adversely affect occupational health and safety (OHS), both for outsourced workers and for those working alongside them. This study assessed the OHS implications of the shift to home-based workers in the Australian clothing industry by systematically comparing the OHS experiences of 100 factory-based workers and 100 outworkers. The level of self-reported injury was over three times higher among outworkers than factory-based workers undertaking similar tasks. The most significant factor explaining this difference was the payment system. All outworkers were paid solely by the piece, whereas factory workers were paid either under a time plus production bonus system or solely on a time basis. While the incidence of injury was far higher among outworkers, factory-based workers paid under an incentive system reported more injuries than those paid solely on a time basis. Increasing injury was correlated with piecework payment systems.

Comparison of Grouping Schemes for Exposure to Total Dust in Cement Factories in Korea.

PubMed

Koh, Dong-Hee; Kim, Tae-Woo; Jang, Seung Hee; Ryu, Hyang-Woo; Park, Donguk

2015-08-01

The purpose of this study was to evaluate grouping schemes for exposure to total dust in cement industry workers using non-repeated measurement data. In total, 2370 total dust measurements taken from nine Portland cement factories in 1995-2009 were analyzed. Various grouping schemes were generated based on work process, job, factory, or average exposure. To characterize variance components of each grouping scheme, we developed mixed-effects models with a B-spline time trend incorporated as fixed effects and a grouping variable incorporated as a random effect. Using the estimated variance components, elasticity was calculated. To compare the prediction performances of different grouping schemes, 10-fold cross-validation tests were conducted, and root mean squared errors and pooled correlation coefficients were calculated for each grouping scheme. The five exposure groups created a posteriori by ranking job and factory combinations according to average dust exposure showed the best prediction performance and highest elasticity among various grouping schemes. Our findings suggest a grouping method based on ranking of job, and factory combinations would be the optimal choice in this population. Our grouping method may aid exposure assessment efforts in similar occupational settings, minimizing the misclassification of exposures. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Engineering tolerance to industrially relevant stress factors in yeast cell factories

PubMed Central

Deparis, Quinten; Claes, Arne; Foulquié-Moreno, Maria R.

2017-01-01

Abstract The main focus in development of yeast cell factories has generally been on establishing optimal activity of heterologous pathways and further metabolic engineering of the host strain to maximize product yield and titer. Adequate stress tolerance of the host strain has turned out to be another major challenge for obtaining economically viable performance in industrial production. Although general robustness is a universal requirement for industrial microorganisms, production of novel compounds using artificial metabolic pathways presents additional challenges. Many of the bio-based compounds desirable for production by cell factories are highly toxic to the host cells in the titers required for economic viability. Artificial metabolic pathways also turn out to be much more sensitive to stress factors than endogenous pathways, likely because regulation of the latter has been optimized in evolution in myriads of environmental conditions. We discuss different environmental and metabolic stress factors with high relevance for industrial utilization of yeast cell factories and the experimental approaches used to engineer higher stress tolerance. Improving stress tolerance in a predictable manner in yeast cell factories should facilitate their widespread utilization in the bio-based economy and extend the range of products successfully produced in large scale in a sustainable and economically profitable way. PMID:28586408

On the use of metabolic control analysis in the optimization of cyanobacterial biosolar cell factories.

PubMed

Angermayr, S Andreas; Hellingwerf, Klaas J

2013-09-26

Oxygenic photosynthesis will have a key role in a sustainable future. It is therefore significant that this process can be engineered in organisms such as cyanobacteria to construct cell factories that catalyze the (sun)light-driven conversion of CO2 and water into products like ethanol, butanol, or other biofuels or lactic acid, a bioplastic precursor, and oxygen as a byproduct. It is of key importance to optimize such cell factories to maximal efficiency. This holds for their light-harvesting capabilities under, for example, circadian illumination in large-scale photobioreactors. However, this also holds for the "dark" reactions of photosynthesis, that is, the conversion of CO2, NADPH, and ATP into a product. Here, we present an analysis, based on metabolic control theory, to estimate the optimal capacity for product formation with which such cyanobacterial cell factories have to be equipped. Engineered l-lactic acid producing Synechocystis sp. PCC6803 strains are used to identify the relation between production rate and enzymatic capacity. The analysis shows that the engineered cell factories for l-lactic acid are fully limited by the metabolic capacity of the product-forming pathway. We attribute this to the fact that currently available promoter systems in cyanobacteria lack the genetic capacity to a provide sufficient expression in single-gene doses.

Multilevel factorial experiments for developing behavioral interventions: power, sample size, and resource considerations.

PubMed

Dziak, John J; Nahum-Shani, Inbal; Collins, Linda M

2012-06-01

Factorial experimental designs have many potential advantages for behavioral scientists. For example, such designs may be useful in building more potent interventions by helping investigators to screen several candidate intervention components simultaneously and to decide which are likely to offer greater benefit before evaluating the intervention as a whole. However, sample size and power considerations may challenge investigators attempting to apply such designs, especially when the population of interest is multilevel (e.g., when students are nested within schools, or when employees are nested within organizations). In this article, we examine the feasibility of factorial experimental designs with multiple factors in a multilevel, clustered setting (i.e., of multilevel, multifactor experiments). We conduct Monte Carlo simulations to demonstrate how design elements-such as the number of clusters, the number of lower-level units, and the intraclass correlation-affect power. Our results suggest that multilevel, multifactor experiments are feasible for factor-screening purposes because of the economical properties of complete and fractional factorial experimental designs. We also discuss resources for sample size planning and power estimation for multilevel factorial experiments. These results are discussed from a resource management perspective, in which the goal is to choose a design that maximizes the scientific benefit using the resources available for an investigation. (c) 2012 APA, all rights reserved

Indoor air pollution evaluation with emphasize on HDI and biological assessment of HDA in the polyurethane factories.

PubMed

Mirmohammadi, Mirtaghi; Hakimi Ibrahim, M; Ahmad, Anees; Kadir, Mohd Omar Abdul; Mohammadyan, M; Mirashrafi, S B

2010-06-01

Today, many raw materials used in factories may have a dangerous effect on the physiological system of workers. One of them which is widely used in the polyurethane factories is diisocyanates. These compounds are widely used in surface coatings, polyurethane foams, adhesives, resins, elastomers, binders, and sealants. Exposure to diisocyanates causes irritation to the skin, mucous membranes, eyes, and respiratory tract. Hexamethylene diamine (HDA) is metabolite of hexamethylene diisocyanate (HDI). It is an excretory material by worker's urine who is exposed to HDI. Around 100 air samples were collected from five defined factories by midget impinger which contained dimethyl sulfoxide absorbent as a solvent and tryptamine as reagent. Samples were analyzed by high-performance liquid chromatography with EC\\UV detector using NIOSH 5522 method of sampling. Also, 50 urine samples collected from workers were also analyzed using William's biological analysis method. The concentration of HDI into all air samples were more than 88 microg/m(3), and they have shown high concentration of pollutant in the workplaces in comparison with NIOSH standard, and all of the workers' urine were contaminated by HDA. The correlation and regression test were used to obtain statistical model for HDI and HDA, which is useful for the prediction of diisocyanates pollution situation in the polyurethane factories.

Effects of occupational exposures and smoking on lung function in tile factory workers.

PubMed

Jaakkola, Maritta S; Sripaiboonkij, Penpatra; Jaakkola, Jouni J K

2011-02-01

The aims of this study were to investigate the relations of occupational exposures in tile industry to lung function and to evaluate potential interaction between smoking and tile dust exposure containing silica. A cross-sectional study of 232 workers (response rate 100%) in a tile factory and 76 office workers (response rate 73%) from four factories in Thailand was conducted in 2006-2007. Participants answered a questionnaire and performed spirometry. Factory workers had lower spirometric functions than office workers, especially those with high dust exposure. There was a dose-response relation between duration of dust exposure and FEV1 and FVC, the adjusted effect of ≥ 21 years of exposure on FEV1 being -240 ml (-100 to -380) and on FVC -300 ml (-140 to -460). The adverse effect of dust on lung function was larger in current smokers suggesting synergism between smoking and tile dust exposure. This study provides evidence that long-term exposure to dust in tile industry is related to lung function reduction. There was a suggestion of synergistic effect between dust exposure and smoking. Tile factories should consider measures to reduce dust exposure and arrange spirometry surveillance for workers with such exposure. Smoking cessation should be promoted to prevent harmful effects of occupational tile dust exposure.

The Idea Factory: An Interactive Intergroup Exercise

ERIC Educational Resources Information Center

Rosh, Lisa; Leach, Evan

2011-01-01

This article outlines the Idea Factory exercise, an interactive exercise designed to help participants examine group, individual, and organizational factors that affect intergroup conflict. Specific emphasis is placed on exploring the relationship between intra- and intergroup dynamics and identifying managerial practices that foster effective…

Replicating systems concepts: Self-replicating lunar factory and demonstration

NASA Technical Reports Server (NTRS)

1982-01-01

Automation of lunar mining and manufacturing facility maintenance and repair is addressed. Designing the factory as an automated, multiproduct, remotely controlled, reprogrammable Lunar Manufacturing Facility capable of constructing duplicates of itself which would themselves be capable of further replication is proposed.

Lumber grade-yields for factory-grade northern red oak sawlogs

Treesearch

James G. Schroeder; Leland F. Hanks

1967-01-01

A report on results of sawing 556 northern red oak sawlogs at four sawmills in West Virginia and Virginia, and the distribution of grades for the standard factory lumber produced. Tabular data on actual yield and curved grade-yield percentages.

JPRS Report Near East & South Asia

DTIC Science & Technology

1993-06-24

countries. Secondly, the exchange of important missions. Indian delegations from the Confederation of Indian Industry, ministry of agriculture, solar ...1993 are about to invest in it tens of millions of dollars in new factories. The refrigerator factory of Tadiran, the diapers of Hogla, Kislok, Moraz

JPRS Report, East Asia, Southeast Asia, Lao People’s Democratic Republic: Biographic Information on Officials

DTIC Science & Technology

1989-05-17

CHANTHAVONG PATHOUMSAI Head of Vientiane Municipality Embroidery & Handicrafts Factory (Jan 87). CHANTHI DEUANSAVAN Deputy editor in chief of...Education Service Chief: Souphan Simongkhoun Jun 88 Embroidery & Handicrafts Factory Chief: Chanthavong Pathoumsai Jan 87 Front Committee

Contamination sources, serogroups, biofilm-forming ability and biocide resistance of Listeria monocytogenes persistent in tilapia-processing facilities.

PubMed

Vázquez-Sánchez, Daniel; Galvão, Juliana Antunes; Oetterer, Marília

2017-11-01

The major contamination sources, serogroups, biofilm-forming ability and biocide resistance of Listeria monocytogenes persistent in tilapia-processing facilities were assessed. Twenty-five processing-control points were examined twice in two factories, including whole tilapias, frozen fillets, water and food-contact surfaces. L. monocytogenes were detected in 4 and 20% of points of Factory A and B respectively, but at low concentrations. Contamination was due to inadequate handling of tilapias in the slaughter room of Factory A and to the application of ineffective sanitizing procedures in Factory B. Seven strains were characterized by RAPD-PCR using primers HLWL85, OPM-01 and DAF4. Genotypic similarity allowed tracing the contamination source of tilapia fillets in Factory B and detecting a prevalent strain in Brazilian tilapia-processing facilities. The serogroup II (including the serotype 1/2c) was the most frequently found, followed by serogroup I (1/2a) and III (1/2b), whereas the serotype 4b was not detected. All strains showed high biofilm-forming ability on stainless steel and polystyrene, but biofilm formation was positively correlated with the type of origin surface. Biofilms were highly resistant to peracetic acid and sodium hypochlorite, being required doses higher than those recommended by manufacturers to be eradicated. Peracetic acid was more effective than sodium hypochlorite, but the use of disinfectants with similar mechanisms of action increases the risk of cross-resistance. Case-by-case approaches are thus recommended to determine the sources and degree of contamination present in each factory, which would allow applying precise responses to control the persistence of bacterial pathogens such as L. monocytogenes .

The association between a living wage and subjective social status and self-rated health: a quasi-experimental study in the Dominican Republic.

PubMed

Landefeld, John C; Burmaster, Katharine B; Rehkopf, David H; Syme, S Leonard; Lahiff, Maureen; Adler-Milstein, Sarah; Fernald, Lia C H

2014-11-01

Poverty, both absolute and relative, is associated with poorer health. This is of particular concern in middle- and low-income countries facing a significant and growing burden of disease. There has been limited research specifically on whether interventions that increase income may foster better health outcomes. The establishment of a "living wage" apparel factory in the Dominican Republic provided a minimum income standard for factory workers, thus creating a natural experiment through which to study the effects of increased income on health indicators. The primary component of the intervention was a 350% wage increase, but apparel workers in the intervention factory also received education and professional development and were exposed to an enhanced occupational health and safety program. Workers at the intervention factory (n = 99) were compared with workers at a matched apparel factory (n = 105). Data were collected via in-person interviews in July and August of 2011, which was 15-16 months after workers were initially hired at the intervention site. Primary analyses used employment at the intervention factory as the independent variable and examined associations with two dependent variables: subjective social status and self-rated health. Results showed that receiving a 350% higher wage was associated with substantially higher subjective social status scores, as well as higher global and comparative self-rated health scores; effects were strongest in women. Subjective social status and self-rated health are associated with future health outcomes, so these results indicate that income increases for apparel workers may have positive long-term health outcomes, particularly for women. Copyright © 2014. Published by Elsevier Ltd.

Effects of public health interventions on industrial emissions and ambient air in Cartagena, Spain.

PubMed

Cirera, Lluís; Rodríguez, Miguel; Giménez, Joaquín; Jiménez, Enrique; Saez, Marc; Guillén, José-Jesús; Medrano, José; Martínez-Victoria, María-Aurelia; Ballester, Ferran; Moreno-Grau, Stella; Navarro, Carmen

2009-03-01

Ten years of public health interventions on industrial emissions to clean air were monitored for the Mediterranean city of Cartagena. During the 1960s, a number of large chemical and non-ferrous metallurgical factories were established that significantly deteriorated the city's air quality. By the 1970s, the average annual air concentration of sulfur dioxide (SO2) ranged from 200 to 300 microg/m3 (standard conditions units). In 1979, the Spanish government implemented an industrial intervention plan to improve the performance of factories and industrial air pollution surveillance. Unplanned urban development led to residential housing being located adjacent to three major factories. Factory A produced lead, factory B processed zinc from ore concentrates, and factory C produced sulfuric acid and phosphates. This, in combination with the particular abrupt topography and frequent atmospheric thermal inversions, resulted in the worsening of air quality and heightening concern for public health. In 1990, the City Council authorized the immediate intervention at these factories to reduce or shut down production if ambient levels of SO2 or total suspended particles (TSP) exceeded a time-emission threshold in pre-established meteorological contexts. The aim of this research was to assess the appropriateness and effectiveness of the intervention plan implemented from 1992 to 2001 to abate industrial air pollution. The maximum daily 1-h ambient air level of SO2, NO2, and TSP pollutants was selected from one of the three urban automatic stations, designed to monitor ambient air quality around industrial emissions sources. The day on which an intervention took place to reduce and/or interrupt industrial production by factory and pollutant was defined as a control day, and the day after an intervention as a post-control day. To assess the short-term intervention effect on air quality, an ecological time series design was applied, using regression analysis in generalized additive models, focusing on day-to-day variations of ambient air pollutants levels. Two indicators were estimated: (a) appropriateness, the ratio between mean levels of the pollutant for control days versus the other days, and (b) effectiveness, the ratio between mean levels of the pollutant for post-control days versus the other days. Ratios in regression analyses were adjusted for trend, seasonality, temperature, humidity and atmospheric pressure, calendar day, and special events as well as the other pollutants. A total of 702 control days were made on the factories' industrial production during the 10-year period. Fifteen reductions and five shutdown control days took place at factory A for ambient air SO2. At factory B, more controls were carried out for the SO2 pollutant in the years 1992-1993 and 1997. At factory C, the control days for SO2 decreased from 59 reductions and 14 shutdowns to a minimum from 1995 onwards, whereas the controls on TSP were more frequent, reaching a maximum of 99 reductions and 47 shutdowns in the last year. SO2 ambient air mean levels ranged from 456 to 699 microg/m(3) among factories on reduction control days and between 624 and 1,010 microg/m(3) on shutdown days. The TSP ambient air mean levels were 428 and 506 microg/m(3) on reduction and shutdown days, respectively. For all types of control days and factories, a mean ratio of 104% (95% confidence interval [CI] 88 to 121) in SO(2) levels was obtained and a mean ratio of 67% (95% CI 59 to 75) in TSP levels. Post-control days at all factories showed a mean ratio of -16% (95% CI -7 to -24) in SO(2) levels and a mean ratio of -13% (95% CI -7 to -19) in TSP levels. Interventions on industrial production based on the urban SO(2) and TSP ambient air levels were justified by the high concentrations detected. The best assessment of the interventions' effectiveness would have been to utilize the ambient air pollutant concentration readings from the entire time of the production shutdowns or reductions; however, the daily hourly maximum turned out to be a useful indicator because of meteorological factors influencing the diurnal concentration profile. A substantial number of interventions were carried out from 1 to 3 AM: , when vehicular traffic was minimum. On the other hand, atmospheric stability undergoes diurnal cycling in the autumn-winter period due to thermal inversion, which reaches maximum levels around daybreak. Therefore, this increases the ambient air levels and justified the interventions carried out at daybreak in spite of the traffic influence. All the interventions for SO(2) and TSP were carried out when the measured ambient air levels of pollutants were exceeded, which shows the appropriateness of the intervention program. This excess was greater when intervening on SO(2) than on the TSP levels. For both ambient air levels of SO(2) and TSP, significant drops in air pollution were achieved from all three factories following activity reductions. The production shutdown controls were very effective, because they returned excess levels, higher than in the reduction controls, to everyday mean values. The Cartagena City observational system of intermittent control has proven to effectively reduce industrial emissions' impact on ambient air quality. This experienced model approach could serve well in highly polluted industrial settings. From a public health perspective, studies are needed to assess that the industrial interventions to control air pollution were related to healthier human populations. Legislation was needed to allow the public administration to take direct actions upon the polluting industries.

46 CFR 35.30-30 - Portable electric equipment-TB/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., explosion-proof lamps approved by Underwriters Laboratories Inc., Factory Mutual Research Corporation, or... Underwriters Laboratories Inc., Factory Mutual Research Corporation, or other independent laboratory recognized...; (iv) Filled with Grade E liquid; or (v) Spaces where flammable gases are not expected to accumulate...

46 CFR 35.30-30 - Portable electric equipment-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., explosion-proof lamps approved by Underwriters Laboratories Inc., Factory Mutual Research Corporation, or... Underwriters Laboratories Inc., Factory Mutual Research Corporation, or other independent laboratory recognized...; (iv) Filled with Grade E liquid; or (v) Spaces where flammable gases are not expected to accumulate...

46 CFR 35.30-30 - Portable electric equipment-TB/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., explosion-proof lamps approved by Underwriters Laboratories Inc., Factory Mutual Research Corporation, or... Underwriters Laboratories Inc., Factory Mutual Research Corporation, or other independent laboratory recognized...; (iv) Filled with Grade E liquid; or (v) Spaces where flammable gases are not expected to accumulate...

46 CFR 35.30-30 - Portable electric equipment-TB/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., explosion-proof lamps approved by Underwriters Laboratories Inc., Factory Mutual Research Corporation, or... Underwriters Laboratories Inc., Factory Mutual Research Corporation, or other independent laboratory recognized...; (iv) Filled with Grade E liquid; or (v) Spaces where flammable gases are not expected to accumulate...

46 CFR 35.30-30 - Portable electric equipment-TB/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., explosion-proof lamps approved by Underwriters Laboratories Inc., Factory Mutual Research Corporation, or... Underwriters Laboratories Inc., Factory Mutual Research Corporation, or other independent laboratory recognized...; (iv) Filled with Grade E liquid; or (v) Spaces where flammable gases are not expected to accumulate...

Patient-Specific B-Cell Antibody Factories to Treat Metastatic Disease

DTIC Science & Technology

2013-08-01

Immortalization of these selected clones using Epstein - Barr viral transformation provides a method to maintain these antibody producing cell lines as a...2013 Please see next page. None provided. Patient-Specific B-Cell Antibody Factories to Treat Metastatic Disease Kevin Claffey University of

46 CFR 162.050-13 - Factory production and inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Factory production and inspection. 162.050-13 Section 162.050-13 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Pollution Prevention Equipment § 162...

50 CFR 300.130 - Vessel and gear restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Vessel and gear restrictions. 300.130 Section 300.130 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED ACTIVITIES INTERNATIONAL... gear restrictions. (a) Factory vessels. Factory vessels are prohibited from operating in treaty waters...

Neutrino Factory Plans at CERN

NASA Astrophysics Data System (ADS)

Riche, J. A.

2002-10-01

The considerable interest raised by the discovery of neutrino oscillations and recent progress in studies of muon colliders has triggered interest in considering a neutrino factory at CERN. This paper explains the reference scenario, indicates the other possible choices and mentions the R&D that are foreseen.

Factorial Design: An Eight Factor Experiment Using Paper Helicopters

NASA Technical Reports Server (NTRS)

Kozma, Michael

1996-01-01

The goal of this paper is to present the analysis of the multi-factor experiment (factorial design) conducted in EG490, Junior Design at Loyola College in Maryland. The discussion of this paper concludes the experimental analysis and ties the individual class papers together.

6. Historic American Buildings Survey Photographed by Henry F. Withey ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Historic American Buildings Survey Photographed by Henry F. Withey April 1937 RUINS OF SOAP FACTORY & SMITHY (FROM S. E. END OF SOAP FACTORY) - Mission San Gabriel Arcangel, Industrial Shop (Ruins), West Mission Drive & Junipero Serra Street, San Gabriel, Los Angeles County, CA

Some Thoughts on Treasure-Keeping.

ERIC Educational Resources Information Center

O'Brien, Thomas C.

1989-01-01

Instead of studying children's knowing, American educators have applied policies and procedures from factories and assembly lines of the early 1900s. Three factory-oriented themes are paramount: mass production, cost effectiveness, and efficiency. This article suggests a Piagetian alternative to the present mechanistic model. Includes seven…

10 CFR 431.62 - Definitions concerning commercial refrigerators, freezers and refrigerator-freezers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... transparent or solid doors, sliding or hinged doors, a combination of hinged, sliding, transparent, or solid... compressors, refrigerant condensers, condenser fans and motors, and factory supplied accessories. Self... more refrigerant compressors, refrigerant condensers, condenser fans and motors, and factory supplied...

Exposing the dark sector with future Z factories

NASA Astrophysics Data System (ADS)

Liu, Jia; Wang, Lian-Tao; Wang, Xiao-Ping; Xue, Wei

2018-05-01

We investigate the prospects of searching dark sector models via exotic Z -boson decay at future e+e- colliders with Giga Z and Tera Z options. Four general categories of dark sector models, Higgs portal dark matter, vector-portal dark matter, inelastic dark matter, and axionlike particles, are considered. Focusing on channels motivated by the dark sector models, we carry out a model-independent study of the sensitivities of Z factories in probing exotic decays. The limits on branching ratios of the exotic Z decay are typically O (10-6- 10-8.5) for the Giga Z and O (10-7.5- 10-11) for the Tera Z , and they are compared with the projection for the high luminosity LHC. We demonstrate that future Z factories can provide its unique and leading sensitivity and highlight the complementarity with other experiments, including the indirect and direct dark matter search limits and the existing collider limits. Future Z factories will play a leading role in uncovering the hidden sector of the Universe in the future.

Brutal and negligent? 19th century factory mothers and child care.

PubMed

Reynolds, Melanie

2011-10-01

This paper aims to highlight some working class women's childcare practices in northern industrial areas of Britain during the latter half of the 19th century. It aims to challenge the commonly held belief that 19th century northern working-class factory mothers were irresponsive and neglectful toward their infants, thereby fuelling the high northern infant mortality rate. It will do this by showing that factory mothers were responsible and responsive toward their infants despite being thwarted by the working patterns of industrialisation. It begins by outlining the arguments made by historians that northern working class women were neglectful toward their children. Then key areas such as the working patterns of waged factory mothers will be illustrated to show the agency and determination of 19th century working class women to provide their infants with good care. Reassessment of these historical childcare practices can provide a springboard by which today's health professionals can endeavour to maintain accurate and fair perspectives about the childcare practices of today's women of low socio-economic status.

Medical consequences of a factory closure: illness and disability in a four-year follow-up study.

PubMed

Westin, S; Norum, D; Schlesselman, J J

1988-03-01

The effect of a factory shut-down on sick leave and disability pensions was investigated in a four-year controlled follow-up study in a general practice setting. The study population consisted of 85 people, 72 women and 13 men, who lost their jobs when a sardine factory near Bergen in Norway was shut down in 1975. The employees of a nearby sister factory' within the same company were chosen as a control population, consisting of 87 people, 66 women and 21 men. The average amount of sick leave for the study group within the first year of follow-up showed a twofold increase compared to the controls. The rate of disability pensions, estimated by the life table method with appropriate adjustments, was more than three times higher in the study group than in the control group from the second through the fourth year of follow-up. The results of this investigation provide further evidence in support of a causal relationship between job loss and illness.

Public health assessment for public health implications of radiation contamination at former clock factories located in Bristo (Hartford County), New Haven, (New Haven County), Thomaston (Litchfield County), and Waterbury (New Haven County), Connecticut, Region 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This public health assessment was developed (1) to evaluate the radiation data collected by the Connecticut Department of Environmental Protection (CT DEP) at structures that once housed clock factories in four Connecticut municipalities, and (2) to determine whether a public health hazard exists at any of these sites from the contamination. Contamination was detected at levels that may pose a health risk to current occupants at the former Waterbury Clock Factory, the former Lux Clock Factory, and the former Benrus Clock Company buildings in Waterbury; the former Sessions Clock Company in Bristol; and the former Seth Thomas Clock Company inmore » Thomaston. However, none of the radiation levels detected pose an immediate health problem. The Connecticut Department of Public Health recommends that individuals be disassociated from areas with radiation at levels exceeding 15 mRem/year.« less

Factorial validity of the Problematic Facebook Use Scale for adolescents and young adults

PubMed Central

Marino, Claudia; Vieno, Alessio; Altoè, Gianmarco; Spada, Marcantonio M.

2017-01-01

Background and aims Recent research on problematic Facebook use has highlighted the need to develop a specific theory-driven measure to assess this potential behavioral addiction. The aim of the present study was to examine the factorial validity of the Problematic Facebook Use Scale (PFUS) adapted from Caplan’s Generalized Problematic Internet Scale model. Methods A total of 1,460 Italian adolescents and young adults (aged 14–29 years) participated in the study. Confirmatory factor analyses were performed in order to assess the factorial validity of the scale. Results Results revealed that the factor structure of the PFUS provided a good fit to the data. Furthermore, results of the multiple group analyses supported the invariance of the model across age and gender groups. Discussion and conclusions This study provides evidence supporting the factorial validity of the PFUS. This new scale provides a theory-driven tool to assess problematic use of Facebook among male and female adolescents and young adults. PMID:28198639

An examination of the factorial and convergent validity of four measures of conspiracist ideation, with recommendations for researchers.

PubMed

Swami, Viren; Barron, David; Weis, Laura; Voracek, Martin; Stieger, Stefan; Furnham, Adrian

2017-01-01

A number scales have been developed to measure conspiracist ideation, but little attention has been paid to the factorial validity of these scales. We reassessed the psychometric properties of four widely-used scales, namely the Belief in Conspiracy Theories Inventory (BCTI), the Conspiracy Mentality Questionnaire (CMQ), the Generic Conspiracist Beliefs Scale (GCBS), and the One-Item Conspiracy Measure (OICM). Eight-hundred-and-three U.S. adults completed all measures, along with measures of endorsement of 9/11 and anti-vaccination conspiracy theories. Through both exploratory and confirmatory factor analysis, we found that only the BCTI had acceptable factorial validity. We failed to confirm the factor structures of the CMQ and the GBCS, suggesting these measures had poor factorial validity. Indices of convergent validity were acceptable for the BCTI, but weaker for the other measures. Based on these findings, we provide suggestions for the future refinement in the measurement of conspiracist ideation.

MapFactory - Towards a mapping design pattern for big geospatial data

NASA Astrophysics Data System (ADS)

Rautenbach, Victoria; Coetzee, Serena

2018-05-01

With big geospatial data emerging, cartographers and geographic information scientists have to find new ways of dealing with the volume, variety, velocity, and veracity (4Vs) of the data. This requires the development of tools that allow processing, filtering, analysing, and visualising of big data through multidisciplinary collaboration. In this paper, we present the MapFactory design pattern that will be used for the creation of different maps according to the (input) design specification for big geospatial data. The design specification is based on elements from ISO19115-1:2014 Geographic information - Metadata - Part 1: Fundamentals that would guide the design and development of the map or set of maps to be produced. The results of the exploratory research suggest that the MapFactory design pattern will help with software reuse and communication. The MapFactory design pattern will aid software developers to build the tools that are required to automate map making with big geospatial data. The resulting maps would assist cartographers and others to make sense of big geospatial data.

An examination of the factorial and convergent validity of four measures of conspiracist ideation, with recommendations for researchers

PubMed Central

Swami, Viren; Barron, David; Weis, Laura; Voracek, Martin; Stieger, Stefan; Furnham, Adrian

2017-01-01

A number scales have been developed to measure conspiracist ideation, but little attention has been paid to the factorial validity of these scales. We reassessed the psychometric properties of four widely-used scales, namely the Belief in Conspiracy Theories Inventory (BCTI), the Conspiracy Mentality Questionnaire (CMQ), the Generic Conspiracist Beliefs Scale (GCBS), and the One-Item Conspiracy Measure (OICM). Eight-hundred-and-three U.S. adults completed all measures, along with measures of endorsement of 9/11 and anti-vaccination conspiracy theories. Through both exploratory and confirmatory factor analysis, we found that only the BCTI had acceptable factorial validity. We failed to confirm the factor structures of the CMQ and the GBCS, suggesting these measures had poor factorial validity. Indices of convergent validity were acceptable for the BCTI, but weaker for the other measures. Based on these findings, we provide suggestions for the future refinement in the measurement of conspiracist ideation. PMID:28231266

Factorial validity of the Problematic Facebook Use Scale for adolescents and young adults.

PubMed

Marino, Claudia; Vieno, Alessio; Altoè, Gianmarco; Spada, Marcantonio M

2017-03-01

Background and aims Recent research on problematic Facebook use has highlighted the need to develop a specific theory-driven measure to assess this potential behavioral addiction. The aim of the present study was to examine the factorial validity of the Problematic Facebook Use Scale (PFUS) adapted from Caplan's Generalized Problematic Internet Scale model. Methods A total of 1,460 Italian adolescents and young adults (aged 14-29 years) participated in the study. Confirmatory factor analyses were performed in order to assess the factorial validity of the scale. Results Results revealed that the factor structure of the PFUS provided a good fit to the data. Furthermore, results of the multiple group analyses supported the invariance of the model across age and gender groups. Discussion and conclusions This study provides evidence supporting the factorial validity of the PFUS. This new scale provides a theory-driven tool to assess problematic use of Facebook among male and female adolescents and young adults.

Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas

PubMed Central

Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

2015-01-01

Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area. PMID:26580644

Car Assembly Line Efficiency Improvement by Lean Principle

NASA Astrophysics Data System (ADS)

Sawassalung, Suwalee; Chutima, Parames

2017-06-01

This research aimed to increase the efficiency of actual working time to compare to design standard time ratio (DSTR) as per analysing process of Lean System of the assembly line in a car manufacturer in Thailand. Currently, the case study factory and its group of factories, which have many branches all over the world, have competed with each other on quality, delivered time and production cost. The production cost which can reduce without affecting quality and acceptable by clients is the manpower cost. The index of competition is DSTR. The factory now has DSTR of 6.13 and DSTR of the assembly department is 4.24 which is very high comparing to other departments. The low DSTR indicates that the factory has good quality. The ways to solve the problem are to apply the following tools, i.e. Lean principle, Value Stream Mapping (VSM), Waste Analysis and ECRS. After implementing the above tools, the results showed that DSTR decreased from 4.24 to 4.06 or 4.25%.

A multiple-locus variable-number tandem repeat analysis (MLVA) of Listeria monocytogenes isolated from Norwegian salmon-processing factories and from listeriosis patients.

PubMed

Lunestad, B T; Truong, T T T; Lindstedt, B-A

2013-10-01

The objective of this study was to characterize Listeria monocytogenes isolated from farmed Atlantic salmon (Salmo salar) and the processing environment in three different Norwegian factories, and compare these to clinical isolates by multiple-locus variable-number tandem repeat analysis (MLVA). The 65 L. monocytogenes isolates obtained gave 15 distinct MLVA profiles. There was great heterogeneity in the distribution of MLVA profiles in factories and within each factory. Nine of the 15 MLVA profiles found in the fish-associated isolates were found to match human profiles. The MLVA profile 07-07-09-10-06 was the most common strain in Norwegian listeriosis patients. L. monocytogenes with this profile has previously been associated with at least two known listeriosis outbreaks in Norway, neither determined to be due to fish consumption. However, since this profile was also found in fish and in the processing environment, fish should be considered as a possible food vehicle during sporadic cases and outbreaks of listeriosis.

[Pollution characteristics and health risk assessment of atmospheric volatile organic compounds (VOCs) in pesticide factory].

PubMed

Tan, Bing; Wang, Tie-Yu; Pang, Bo; Zhu, Zhao-Yun; Wang, Dao-Han; Lü, Yong-Long

2013-12-01

A method for determining volatile organic compounds (VOCs) in air by summa canister collecting and gas chromatography/ mass spectroscopy detecting was adopted. Pollution condition and characteristics of VOCs were discussed in three representative pesticide factories in Zhangjiakou City, Hebei Province. Meanwhile, an internationally recognized four-step evaluation model of health risk assessment was applied to preliminarily assess the health risk caused by atmospheric VOCs in different exposure ways, inhalation and dermal exposure. Results showed that serious total VOCs pollution existed in all factories. Concentrations of n-hexane (6161.90-6910.00 microg x m(-3)), benzene (126.00-179.30 microg x m(-3)) and 1,3-butadiene (115.00-177.30 microg x m(-3)) exceeded the Chronic Inhalation Reference Concentrations recommended by USEPA, corresponding to 700, 30 and 2 microg x m(-3), respectively. Concentration of dichloromethane (724.00 microg x m(-3)) in factory B was also higher than the reference concentration (600 microg x m(-3)). Results of health risk assessment indicated that non-carcinogenic risk indexes of VOCs ranged from 1.00E-04 to 1.00E + 00 by inhalation exposure, and 1.00E-09 to 1.00E-05 by dermal exposure. Risk indexes of n-hexane and dichloromethane by inhalation exposure in all factories exceeded 1, and risk index of benzene by inhalation in factory B was also higher than 1. Carcinogenic risk indexes exposed to VOCs ranged from 1.00E-08 to 1.00E-03 by inhalation exposure and 1. oo00E -13 to 1.00E-08 by dermal exposure. Cancer risk of 1,3-butadiene by inhalation exceeded 1.0E-04, which lead to definite risk, and those of benzene by inhalation also exceeded the maximum allowable level recommended by International Commission on Radiological Protection (5.0E-05). The risks of dermal exposure presented the same trend as inhalation exposure, but the level was much lower than that of inhalation exposure. Thus, inhalation exposure of atmospheric VOCs was the dominant way of health risk in these factories.

A factory concept for processing and manufacturing with lunar material

NASA Technical Reports Server (NTRS)

Driggers, G. W.

1977-01-01

A conceptual design for an orbital factory sized to process 1.5 million metric tons per year of raw lunar fines into 0.3 million metric tons of manufacturing materials is presented. A conservative approach involving application of present earth-based technology leads to a design devoid of new inventions. Earth based counterparts to the factory machinery were used to generate subsystem masses and lumped parameters for volume and mass estimates. The results are considered to be conservative since technologies more advanced than those assumed are presently available in many areas. Some attributes of potential space processing technologies applied to material refinement and component manufacture are discussed.

Jean Piaget: Images of a life and his factory.

PubMed

Burman, Jeremy Trevelyan

2012-08-01

In this article, I use a new book about Jean Piaget to introduce a new historical method: examining "psychological factories." I also discuss some of the ways that "Great Men" are presented in the literature, as well as opportunities for new projects if one approaches the history of the discipline differently and examines the conditions that made that greatness possible. To that end, the article includes many details about Piaget that have never before been discussed in English. Attention is drawn, in particular, to Piaget's collaborators: the hundreds of workers at his factory in Geneva, many of whom were women. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

IT product competition Network

NASA Astrophysics Data System (ADS)

Xu, Xiu-Lian; Zhou, Lei; Shi, Jian-Jun; Wang, Yong-Li; Feng, Ai-Xia; He, Da-Ren

2008-03-01

Along with the technical development, the IT product competition becomes increasingly fierce in recent years. The factories, which produce the same IT product, have to improve continuously their own product quality for taking a large piece of cake in the product sale market. We suggest using a complex network description for the IT product competition. In the network the factories are defined as nodes, and two nodes are connected by a link if they produce a common IT product. The edge represents the sale competition relationship. 2121 factories and 265 products have been investigated. Some statistical properties, such as the degree distribution, node strength distribution, assortativity, and node degree correlation have been empirically obtained.

The Clone Factory

ERIC Educational Resources Information Center

Stoddard, Beryl

2005-01-01

Have humans been cloned? Is it possible? Immediate interest is sparked when students are asked these questions. In response to their curiosity, the clone factory activity was developed to help them understand the process of cloning. In this activity, students reenact the cloning process, in a very simplified simulation. After completing the…

Education as Simulation Game: A Critical Hermeneutic.

ERIC Educational Resources Information Center

Palermo, James

1979-01-01

This paper examines a specific educational game called "Popcorn Factory." First, it gives a detailed description of the game, then shifts the description into a critical hermeneutical framework, analyzing the deep structures at work in the "Popcorn Factory" according to the theories of Freud and Marcuse. (Author/SJL)

Analysis of Mannitol, as Tracer of Bacterial Infections in Cane and Beet Sugar Factories

USDA-ARS?s Scientific Manuscript database

Mannitol, formed mainly by Leuconostoc mesenteroides bacteria, is a sensitive marker of sugarcane and sugarbeet deterioration that can predict multiple processing problems. The delivery of consignments of deteriorated sugarcane or sugar beets to factories can detrimentally affect multiple process u...

Analysis of Mannitol, as Tracer of Bacterial Infections in Cane and Beet Sugar Factories

USDA-ARS?s Scientific Manuscript database

Mannitol, formed mainly by Leuconostoc mesenteroides bacteria, is a sensitive marker of sugarcane and sugarbeet deterioration that can predict multiple processing problems. The delivery of consignments of deteriorated sugarcane or sugar beets to factories can detrimentally affect multiple process un...

Skills for the 21st Century Supervisor: What Factory Personnel Think.

ERIC Educational Resources Information Center

Hotek, Douglas R.

2002-01-01

Discusses supervisory skills that factory personnel believe are important for leading and improving employee performance in complex manufacturing environments. Highlights include a historical perspective; manufacturing technologies; results of Pareto analysis, comparative analysis, and analysis of variance; and a Taxonomy of Supervisory Skills.…

JPRS Report, East Europe

DTIC Science & Technology

1990-05-09

agree- The fiberboard factory in Karlin has incredibly upped its ment with a Swedish company, IKEA , for leasing from prices, so we told them "thanks but...other furniture factories and the IKEA off. company, building a fiberboard plant in Czarnkow and [ZYCIE WARSZAWY] What has been this year like, so

Automation U.S.A.: Overcoming Barriers to Automation.

ERIC Educational Resources Information Center

Brody, Herb

1985-01-01

Although labor unions and inadequate technology play minor roles, the principal barrier to factory automation is "fear of change." Related problems include long-term benefits, nontechnical executives, and uncertainty of factory cost accounting. Industry support for university programs is helping to educate engineers to design, implement, and…

[Heavy metals distribution characteristics and risk assessment of water below an electroplating factory].

PubMed

Hang, Xiao-Shuai; Wang, Huo-Yan; Zhou, Jian-Min

2008-10-01

Surface water and shallow groundwater within the flow of an electroplating factory was analyzed in order to study the resulting impact. The analysis method of ICP-AES was used to analyze content of zinc, manganese, chromium, copper and nickel in surface water and groundwater samples. The results indicate acidic pollutants of zinc, manganese, chromium, copper and nickel were discharged from the factory with concentrations of 1.34, 3.77, 28.1, 6.40 and 9.37 mg x L(-1), respectively; and pH was 2.32. They all exceeded permissible levels according to Integrated Wastewater Discharge Standard except zinc. Factory discharge is responsible for the longitudinal distribution characteristics of heavy metals in the stream water downstream from the factory. Heavy metals variations in the well water do not suggest they were affected by heavy metals in the stream, indicating that the migration rates of heavy metals in soils were relatively low. Risk assessment shows surface water quality significantly deteriorated. Nickel and manganese in the stream water exceeded the standard levels seriously, and chromium and copper in some samples were also above Grade III standard levels according to Environmental Quality Standard for Surface Water. Moreover, all studied heavy metals in 14 groundwater samples measured within drinking water standard, except manganese in 4 groundwater samples, which were Grade IV according to Quality Standard for Ground water.

[Risk assessment of work-related upper limb musculoskeletal disorders in thirty factories in the upholstered furniture industry].

PubMed

Nicoletti, S; Carino, M; Di Leone, G; Trani, G; Colombini, Daniela; Occhipinti, E

2008-01-01

One of the most common procedures for risk assessment of upper limb work-related musculoskeletal disorders (UL-WMSDs) in Italy is the OCRA synthetic index, which is recommended as the preferred method in the ISO standard 11228-3. The aim of the survey was to assess the risk of UL-WMSDs due to repetitive strain and movements in thirty factories of the sofa industry located in a large geographic area of southern Italy. The most characteristic working tasks of the manufacturing process were studied: filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. The single tasks were carried out almost exclusively manually, with features of a handicraft approach. Data were collected through questionnaires and video tape recordings in each factory. The mean value of the OCRA index of every group of factories was calculated by weighting the values of the index of each single task group with the number of the workers. Figures obtained in the different factories showed values of the OCRA index ranging between 4 and 15. A 2,9 OCRA value was attributed to a low exposure group. Even though the work tasks analyzed were characterized by long duration of the manufacturing cycle (between 5 and 60 min), a particular but rigorous application of the OCRA procedures made it possible for a detailed risk assessment to be made for each of the working groups analysed.

Development of advanced therapies in Italy: Management models and sustainability in six Italian cell factories.

PubMed

Gaipa, Giuseppe; Introna, Martino; Golay, Josee; Nolli, Maria Luisa; Vallanti, Giuliana; Parati, Eugenio; Giordano, Rosaria; Romagnoli, Luca; Melazzini, Mario; Biondi, Andrea; Biagi, Ettore

2016-04-01

On November 10, 2014, the representatives of all six certified Good Manufacturing Practices (GMP) cell factories operating in the Lombardy Region of Italy convened a 1-day workshop in Milan titled "Management Models for the Development And Sustainability of Cell Factories: Public-Private Partnership?" The speakers and panelists addressed not only the many scientific, technological and cultural challenges faced by Lombardy Cell Factories, but also the potential impact of advanced therapy medicinal products (ATMPs) on public health and the role played by translational research in this process. Future perspectives for research and development (R&D) and manufacturing processes in the field of regenerative medicine were discussed as well. This report summarizes the most important issues raised by the workshop participants with particular emphasis on strengths and limitations of the R&D and manufacturing processes for innovative therapeutics in Lombardy and what can be improved in this context while maintaining GMP standards. The participants highlighted several strategies to translate patient-specific advanced therapeutics into scaled manufacturing products for clinical application. These included (i) the development of a synergistic interaction between public and private institutions, (ii) better integration with Italian regulatory agencies and (iii) the creation of a network among Lombardy cell factories and other Italian and European institutions. Copyright © 2016 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Engineering microbial cell factories for the production of plant natural products: from design principles to industrial-scale production.

PubMed

Liu, Xiaonan; Ding, Wentao; Jiang, Huifeng

2017-07-19

Plant natural products (PNPs) are widely used as pharmaceuticals, nutraceuticals, seasonings, pigments, etc., with a huge commercial value on the global market. However, most of these PNPs are still being extracted from plants. A resource-conserving and environment-friendly synthesis route for PNPs that utilizes microbial cell factories has attracted increasing attention since the 1940s. However, at the present only a handful of PNPs are being produced by microbial cell factories at an industrial scale, and there are still many challenges in their large-scale application. One of the challenges is that most biosynthetic pathways of PNPs are still unknown, which largely limits the number of candidate PNPs for heterologous microbial production. Another challenge is that the metabolic fluxes toward the target products in microbial hosts are often hindered by poor precursor supply, low catalytic activity of enzymes and obstructed product transport. Consequently, despite intensive studies on the metabolic engineering of microbial hosts, the fermentation costs of most heterologously produced PNPs are still too high for industrial-scale production. In this paper, we review several aspects of PNP production in microbial cell factories, including important design principles and recent progress in pathway mining and metabolic engineering. In addition, implemented cases of industrial-scale production of PNPs in microbial cell factories are also highlighted.

Neutrino factory

DOE PAGES

Bogomilov, M.; Matev, R.; Tsenov, R.; ...

2014-12-08

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable ofmore » making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.« less

Pay Matters: The Piece Rate and Health in the Developing World.

PubMed

Davis, Mary E

Piece rate pay remains a common form of compensation in developing-world industries. While the piece rate may boost productivity, it has been shown to have unintended consequences for occupational safety and health, including increased accident and injury risk. This paper explores the relationship between worker pay and physical and emotional health, and questions the modern day business case for piece rate pay in the developing world. The relationship between piece rate and self-reported measures of physical and emotional health is estimated using a large survey of garment workers in 109 Vietnamese factories between 2010 and 2014. A random effects logit model controls for factory and year, predicting worker health as a function of pay type, demographics, and factory characteristics. Workers paid by the piece report worse physical and emotional health than workers paid by the hour (OR = 1.38-1.81). Wage incentives provide the most consistently significant evidence of all demographic and factory-level variables, including the factory's own performance on occupational safety and health compliance measures. These results highlight the importance of how workers are paid to understanding the variability in worker health outcomes. More research is needed to better understand the business case supporting the continued use of piece rate pay in the developing world. Copyright © 2016 The Author. Published by Elsevier Inc. All rights reserved.

Problem Solving Software for Math Classes.

ERIC Educational Resources Information Center

Troutner, Joanne

1987-01-01

Described are 10 computer software programs for problem solving related to mathematics. Programs described are: (1) Box Solves Story Problems; (2) Safari Search; (3) Puzzle Tanks; (4) The King's Rule; (5) The Factory; (6) The Royal Rules; (7) The Enchanted Forest; (8) Gears; (9) The Super Factory; and (10) Creativity Unlimited. (RH)

Limiting microbial degradation in Louisiana sugarcane mills: Are biocides effective?

USDA-ARS?s Scientific Manuscript database

Sucrose loss takes place post-harvest in sugarcane, and still represents a significant problem for the global sugar industry. In Louisiana, microorganisms cause the majority of sucrose loss during sugarcane transport to the factory, in cane piles at factory stock yards, and during overnight truck lo...

FURNACE NO. 1, THE ORIGINAL FURNACE OF THE GLASS FACTORY; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FURNACE NO. 1, THE ORIGINAL FURNACE OF THE GLASS FACTORY; TO THE LEFT IS A GLORY HOLE, POSSIBLY DATING FROM THE NINETEENTH CENTURY; THE SQUARE-SHAPED GLORY HOLE TO THE RIGHT PROBABLY DATES FROM THE 1950S. - Westmoreland Glass Company, Seventh & Kier Streets, Grapeville, Westmoreland County, PA

Advances in greenhouse automation and controlled environment agriculture: A transition to plant factories and urban farming

USDA-ARS?s Scientific Manuscript database

Greenhouse cultivation has evolved from simple covered rows of open-fields crops to highly sophisticated controlled environment agriculture (CEA) facilities that projected the image of plant factories for urban farming. The advances and improvements in CEA have promoted the scientific solutions for ...

10 CFR 431.303 - Materials incorporated by reference.

Code of Federal Regulations, 2013 CFR

2013-01-01

...-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus, approved May 1, 2004..., (“DIN EN 13164”), Thermal insulation products for buildings—Factory made products of extruded... 431. (2) DIN EN 13165:2009-02, (“DIN EN 13165”), Thermal insulation products for buildings—Factory...

10 CFR 431.303 - Materials incorporated by reference.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus, approved May 1, 2004..., (“DIN EN 13164”), Thermal insulation products for buildings—Factory made products of extruded... 431. (2) DIN EN 13165:2009-02, (“DIN EN 13165”), Thermal insulation products for buildings—Factory...

10 CFR 431.303 - Materials incorporated by reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Transmission Properties by Means of the Heat Flow Meter Apparatus, approved May 1, 2004, IBR approved for § 431... insulation products for buildings—Factory made products of extruded polystyrene foam (XPS)—Specification..., (“DIN EN 13165”), Thermal insulation products for buildings—Factory made rigid polyurethane foam (PUR...

The Industrial Base and National Security: A New Strategy

DTIC Science & Technology

1993-04-01

addresses this issue in her article entitled, " Managing Innovation on the Factory Floor": Manufacturing managers often buy the most advanced...Incentives Program." Government Contract Number MDA903-85-C-0139 Final Report, 1986. 31 11. Tyre, Marcie J. " Managing Innovation On The Factory Floor

Factory Production Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on factory production occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include assemblers, blue collar worker…

Development of a factory/refinery method to measure total, soluble, and insoluble starch in sugar products

USDA-ARS?s Scientific Manuscript database

An easy, rapid, and inexpensive method was developed to measure total, soluble, and insoluble starch in products at the factory and refinery, using microwave-assisted neutralization chemistry. The method was optimized using the previously developed USDA Starch Research method as a reference. Optimal...

The 1820 Census of Manufactures. Teaching with Documents.

ERIC Educational Resources Information Center

Potter, Lee Ann; Schamel, Wynell

1999-01-01

Reviews the emergence of employment opportunities for women outside the home. Focuses specifically on the Dover Cotton Factory in Dover, New Hampshire. Provides a reproduction of the page from the 1820 Census of Manufactures that contains information about the Dover Cotton Factory. (Contains document based teaching activities.) (CMK)

A Student Asks about (-5)!

ERIC Educational Resources Information Center

Goldenberg, E. Paul; Carter, Cynthia J.

2017-01-01

A first-year algebra student's curiosity about factorials of negative numbers became a starting point for an extended discovery lesson into territory not usually explored in secondary school mathematics. In this article, the authors, math teachers in Massachusetts, examine how to solve for factorials of negative numbers and discuss how they taught…

27 CFR 40.183 - Record of tobacco products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Record of tobacco products...) Use of the United States, and (6) Experimental purposes off factory premises; (g) Otherwise disposed...) Use for experimental purposes on factory premises, (4) Loss, (5) Destruction, and (6) Reduction to...

Making Connections: After the Factories Revisited.

ERIC Educational Resources Information Center

Rosenfeld, Stuart A.; Bergman, Edward M.

This analysis of employment patterns in the American South extends a 1985 report, "After the Factories: Changing Employment Patterns in the Rural South," which was based on the years between 1977-1982. The 1985 report included Texas, but this analysis includes only the 12 Southern Growth Policies Board (SGPB) member states. This new…

Holland Code, Job Satisfaction and Productivity in Clothing Factory Workers.

ERIC Educational Resources Information Center

Heesacker, Martin; And Others

Published research on vocational interests and personality has not often assessed the characteristics of workers and the work environment in blue-collar, women-dominated industries. This study administered the Self-Directed Search (Form E) to 318 sewing machine operators in three clothing factories. Holland codes, productivity, job satisfaction,…

Perceived Competence Scale for Children: Testing for Factorial Validity and Invariance across Age and Ability.

ERIC Educational Resources Information Center

Byrne, Barbara M.; Schneider, Barry H.

1988-01-01

For 241 normal and 132 gifted fifth graders and 113 normal and 117 gifted seventh graders in Ottawa (Ontario), exploratory and confirmatory factor analyses investigated the factorial validity of the Perceived Competence Scale for Children (PCSC). Overall, the PCSC demonstrated sound psychometric properties. (SLD)

Factorial Composition of Counsellor Effectiveness Scale

ERIC Educational Resources Information Center

Oluseyi, Adeyemo Emily; Oreoluwa, Shaba Veronica

2014-01-01

The study developed a set of items that could measure counsellor effectiveness. It reduced the initial set of variables related to counsellor effectiveness to such number of variables that are generally perceived as indicative of counsellor effectiveness and determined the factorial composition of the scale. in order to identify the major factors…

An Innovation in Children's T.V. the Infinity Factory

ERIC Educational Resources Information Center

La Luz, 1977

1977-01-01

"Infinity Factory" is a slick, fast-paced, sophisticated series aimed at teaching mathematics fundamentals with a unique and arresting approach. The 30 minutes of live-action skits, brief filmed documentaries, and animation sequences explore common sense math concepts and present useful information showing math at work in everyday life. (NQ)

Efficacy of Dual Enrollment in Rural Southwest Virginia

ERIC Educational Resources Information Center

Carter, Karen Glass

2009-01-01

The intent of this dissertation was to determine if enrollment into a career and technical education dual enrollment program encouraged students to continue their education into postsecondary education and if workplace readiness skills were increased. This study completed a factorial analysis of student demographic and factorial data as associated…

This Furniture Program Has Its Own Factory

ERIC Educational Resources Information Center

Bliss, Robert E.

1975-01-01

Catawba Valley Technical Institute, located in Hickory, North Carolina where 45 percent of the population is employed by the furniture industry, presently offers two associate degree and two vocational diploma programs. A campus furniture factory, close institute and industry cooperation, and extensive in-plant training have contributed to the…

Development of a research method to measure insoluble and soluble starch in sugarcane factory and refinery products

USDA-ARS?s Scientific Manuscript database

A rapid, quantitative research method using microwave-assisted probe ultrasonication was developed to facilitate the determination of total insoluble, and soluble starch in various sugar factory and refinery products. Several variables that affect starch solubilization were evaluated: 1) conductiv...

Middle Level Learning Number 48

ERIC Educational Resources Information Center

Freedman, Eric B.; Roberts, Scott L.

2013-01-01

Two articles are presented in this column. "Life in an Auto Factory: Simulating how Labor and Management Interact" by Eric B. Freedman describes a classroom simulation of management and labor relations in an auto factory. Classroom handouts are included. The next article, "Women of Action and County Names: Mary Musgrove County--Why…

Testing for Factorial Invariance in the Context of Construct Validation

ERIC Educational Resources Information Center

Dimitrov, Dimiter M.

2010-01-01

This article describes the logic and procedures behind testing for factorial invariance across groups in the context of construct validation. The procedures include testing for configural, measurement, and structural invariance in the framework of multiple-group confirmatory factor analysis (CFA). The "forward" (sequential constraint imposition)…

Muon Accelerator Program (MAP) | Neutrino Factory | Research Goals

Science.gov Websites

; Committees Research Goals Research & Development Design & Simulation Technology Development Systems Demonstrations Activities MASS Muon Cooling MuCool Test Area MICE Experiment MERIT Muon Collider Research Goals Why Muons at the Energy Frontier? How does it work? Graphics Animation Neutrino Factory Research Goals

The Factorial Structure of Four Temperament Styles and Measurement Invariance across Gender and Age Groups

ERIC Educational Resources Information Center

Rowinski, Tomasz; Cieciuch, Jan; Oakland, Thomas

2014-01-01

The Polish Temperament Styles Questionnaire (PTSQ), derived from Student Style Questionnaire (SSQ) was developed to measure four bipolar temperament styles: extroverted versus introverted, practical versus imaginative, thinking versus feeling, and organized versus flexible. The study focuses on factorial validity and measurement invariance…

The Old Factory

ERIC Educational Resources Information Center

Roman, Harry T.

2007-01-01

Technology education is not just about things, systems, and processes. It can also be about history, people, technological change, and impacts on society. In this design challenge, one uses technology education principles and ideas to convert an old factory into a museum and learning center. The challenge with this historical resource is to think…

The Summarized Factorial Assessment Outline: A Structural Paradigm for EMR and L-D Assessment.

ERIC Educational Resources Information Center

Gerig, Gaylord E.

Described is the Summarized Factorial Assessment Outline (SFAO), a total assessment procedure for educable mentally retarded and learning disabled students which is centered on the three diagnostic processes of identification, interpretation, and prescription for remediation. Following an introduction covering the problem, purpose, need, and…

Television, Gender, and Labor in the Global City.

ERIC Educational Resources Information Center

McMillin, Divya C.

2003-01-01

Examines the role of television advertising among unskilled female factory laborers in Bangalore, India. Demonstrates that television in the global city provides spaces for the expression of urban and gendered identities that could be accessed through the economic benefits of factory labor. Concludes that participatory communication and further…

Factorial validity of the Delta Healthy Eating Attitudes Scale related to diet quality

USDA-ARS?s Scientific Manuscript database

The objective of this study was to establish factorial validity of decisional balance (DB), self-efficacy (SE) and social support (SS) psychosocial constructs and convergent validity related to diet quality. A sample (N=319) of predominantly African American women from the Mississippi Communities fo...

Evaluation of a laser scanner for large volume coordinate metrology: a comparison of results before and after factory calibration

NASA Astrophysics Data System (ADS)

Ferrucci, M.; Muralikrishnan, B.; Sawyer, D.; Phillips, S.; Petrov, P.; Yakovlev, Y.; Astrelin, A.; Milligan, S.; Palmateer, J.

2014-10-01

Large volume laser scanners are increasingly being used for a variety of dimensional metrology applications. Methods to evaluate the performance of these scanners are still under development and there are currently no documentary standards available. This paper describes the results of extensive ranging and volumetric performance tests conducted on a large volume laser scanner. The results demonstrated small but clear systematic errors that are explained in the context of a geometric error model for the instrument. The instrument was subsequently returned to the manufacturer for factory calibration. The ranging and volumetric tests were performed again and the results are compared against those obtained prior to the factory calibration.

On KEK B-Factory

NASA Astrophysics Data System (ADS)

Sugawara, H.

2009-07-01

There are two principles which the management of a research institute like KEK must respect when dealing with such big project as B-Factory. One is the scientific merit of the project and the other is the organizational consideration which includes financial, human, technical and historical elements. Ideally, the two principles are to be fully taken into account. But, in many cases, one or the other is only partially fulfilled due to unavoidable circumstances. The lack of flexibility to respond to all possible situations is more dangerous and may lead to a disaster as in the case of SSC. I will describe the process which lead to the successful construction, operation and physics presentations of KEK B-Factory following faithfully the official records.

Front End for a neutrino factory or muon collider

NASA Astrophysics Data System (ADS)

Neuffer, D.; Snopok, P.; Alexahin, Y.

2017-11-01

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ 's produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a varphi -δ E rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an "HFOFO Snake" configuration that cools both μ+ and μ- transversely and longitudinally. The status of the design is presented and variations are discussed.

[The professional responsibility of the factory physician].

PubMed

Tavani, M

1987-01-01

The author briefly reviews the present trends in jurisprudence concerning the professional liability of the physician in penal and civil law and, in the light of the much discussed decree issued by the Court of Cassation (Court of Appeal) (Decree No. 2799/86 - Labour Section), discusses the juridical position of the factory doctor, the juridical relationship between the doctor and the workforce, his contractual obligations, his rôle and his duties. The aspects that are more specifically appropriate to assessment of the professional liability of the factory doctor are described, commenting on the various criteria that may justify, in matters other than industrial accidents, recognition of the existence of an occupational disease.

Undergraduate students' initial conceptions of factorials

NASA Astrophysics Data System (ADS)

Lockwood, Elise; Erickson, Sarah

2017-05-01

Counting problems offer rich opportunities for students to engage in mathematical thinking, but they can be difficult for students to solve. In this paper, we present a study that examines student thinking about one concept within counting, factorials, which are a key aspect of many combinatorial ideas. In an effort to better understand students' conceptions of factorials, we conducted interviews with 20 undergraduate students. We present a key distinction between computational versus combinatorial conceptions, and we explore three aspects of data that shed light on students' conceptions (their initial characterizations, their definitions of 0!, and their responses to Likert-response questions). We present implications this may have for mathematics educators both within and separate from combinatorics.

Research on the ITOC based scheduling system for ship piping production

NASA Astrophysics Data System (ADS)

Li, Rui; Liu, Yu-Jun; Hamada, Kunihiro

2010-12-01

Manufacturing of ship piping systems is one of the major production activities in shipbuilding. The schedule of pipe production has an important impact on the master schedule of shipbuilding. In this research, the ITOC concept was introduced to solve the scheduling problems of a piping factory, and an intelligent scheduling system was developed. The system, in which a product model, an operation model, a factory model, and a knowledge database of piping production were integrated, automated the planning process and production scheduling. Details of the above points were discussed. Moreover, an application of the system in a piping factory, which achieved a higher level of performance as measured by tardiness, lead time, and inventory, was demonstrated.

Pion Production for Neutrino Factory-challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Breton, Florian; Le Couedic, Clement; Soler, F. J. P.

2011-10-06

One of the key issues in the design of a Neutrino Factory target station is the determination of the optimum kinetic energy of the proton beam due to the large uncertainties in simulations of protons impinging on nuclear targets. In this paper we have developed a procedure to correct GEANT4 simulations for the HARP data, and we have determined the yield of muons expected at the front-end of a Neutrino Factory as a function of target material (Be, C, Al, Ta and Pb) and energy (3-12 GeV).The maximum muon yield is found between 5 and 8 GeV for high Zmore » targets and 3 GeV for low Z targets.« less

Gaming in the Classroom: An Innovative Way to Teach Factorial Designs

ERIC Educational Resources Information Center

Stansbury, Jessica A.; Munro, Geoffrey D.

2013-01-01

This study tested the effectiveness of video game use for instruction of factorial designs in a research methods course. Students designed and conducted a mini study, playing "Dance, Dance, Revolution", using video game scores as the dependent variable. A mixed-design analysis of variance revealed a significantly greater increase from pretest to…

Evolution of United States Military Landmine Doctrine and Employment

DTIC Science & Technology

2015-06-12

landmine descends is that of devices which ancient armies used to hinder and wound the enemy. This was a diverse group of devices which could make...factories in Egypt once it had fallen to Allied advances, the use of enemy mines was still commonplace. The British mine factories in Egypt also had no

Dermatitis in a rubber tyre factory.

PubMed

Zina, A M; Bedello, P G; Cane, D; Bundino, S; Benedetto, A

1987-07-01

An outbreak of occupational dermatitis in a rubber tyre factory is reported. An unusual clinical picture was recognized. Patch tests revealed a high sensitization rate to the MBT derivative used: 2-(2'-4'dinitrophenylthio)benzothiazole. Since tests with MBT mix and dinitrophenol were negative; sensitization to a contaminant was suspected. DNCB was traced as the substance responsible.

Cultural Validation of the Maslach Burnout Inventory for Korean Students

ERIC Educational Resources Information Center

Shin, Hyojung; Puig, Ana; Lee, Jayoung; Lee, Ji Hee; Lee, Sang Min

2011-01-01

The purpose of this study was to examine the factorial validity of the MBI-SS in Korean students. Specifically, we investigated whether the original three-factor structure of the MBI-SS was appropriate for use with Korean students. In addition, by running multi-group structural equation model analyses with factorial invariance tests simultaneously…

Activity and storage of commercial amylases in the 2013 Louisiana grinding season

USDA-ARS?s Scientific Manuscript database

A current problem in the application of amylases at sugarcane factories is the existence of a wide variation in the activities and activity per unit cost of commercial amylases. The efficiency of amylase action to break down starch in the factory is related to the activity of the amylase used. Until...

Translational Bounds for Factorial n and the Factorial Polynomial

ERIC Educational Resources Information Center

Mahmood, Munir; Edwards, Phillip

2009-01-01

During the period 1729-1826 Bernoulli, Euler, Goldbach and Legendre developed expressions for defining and evaluating "n"! and the related gamma function. Expressions related to "n"! and the gamma function are a common feature in computer science and engineering applications. In the modern computer age people live in now, two common tests to…

Physiological responses of lichens to factorial fumigations with nitric acid and ozone

Treesearch

J. Riddell; P.E. Padgett; T. Nash

2012-01-01

This paper addresses the effects of gaseous nitric acid (HNO3) and ozone (O3), two important air pollutants, on six lichen species with different morphological, ecological, and biological characteristics. The treatment chambers were set up in a factorial design consisting of control chambers, chambers fumigated with HNO

Factorial Structure of the French Version of the Rosenberg Self-Esteem Scale among the Elderly

ERIC Educational Resources Information Center

Gana, Kamel; Alaphilippe, Daniel; Bailly, Nathalie

2005-01-01

Ten different confirmatory factor analysis models, including ones with correlated traits correlated methods, correlated traits correlated uniqueness, and correlated traits uncorrelated methods, were proposed to examine the factorial structure of the French version of the Rosenberg Self-Esteem Scale (Rosenberg, 1965). In line with previous studies…

From Exam Factories to Communities of Discovery: The Democratic Route

ERIC Educational Resources Information Center

Coffield, Frank; Williamson, Bill

2011-01-01

"From Exam Factories to Communities of Discovery" passionately calls for educators to challenge the dominant market-led model of education and instead build a more democratic one, better able to face threats such as environmental damage; intensified global competition; corrosive social inequalities in and between nations in the world;…

First year in operating a mechanical detrasher system at a sugarcane factory in Louisiana

USDA-ARS?s Scientific Manuscript database

Over the past 2 years, a new prototype mechanical detrasher system was built at a Louisiana sugarcane factory by American Biocarbon LLC. It was built to remove sugarcane trash (top stalks and leaves) before processing, and for the manufacture and sale of value-added-products from the removed trash,...

The Use of Factorial Forecasting to Predict Public Response

ERIC Educational Resources Information Center

Weiss, David J.

2012-01-01

Policies that call for members of the public to change their behavior fail if people don't change; predictions of whether the requisite changes will take place are needed prior to implementation. I propose to solve the prediction problem with Factorial Forecasting, a version of functional measurement methodology that employs group designs. Aspects…

Factorial Validity, Reliability, and Measurement Equivalence of the Noctcaelador Inventory across Three Ethnic Groups

ERIC Educational Resources Information Center

Kelly, William E.

2008-01-01

This study examined the reliability, factorial validity, and measurement equivalence of the Noctcaelador Inventory (NI) among three ethnic groups of college students. Participants included 200 Whites, 200 African Americans, and 200 Latino/Hispanics. The results indicated that although the African American sample scored slightly lower than the…

36. VIEW EAST OF WASTE HEAT RECOVERY SYSTEM IN BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. VIEW EAST OF WASTE HEAT RECOVERY SYSTEM IN BUILDING 43A; THIS WAS PART OF A SYSTEM WHICH PROVIDED HOT WATER FOR OFFICE AND FACTORY BUILDING HEATING IN THE WEST PLANT; NOTE FACTORY WHISTLE TIMER ON TOP OF HEAT EXCHANGER - Scovill Brass Works, 59 Mill Street, Waterbury, New Haven County, CT

Elucidation of the hard-to-boil massecuites phenomenon and the Iintroduction of oscillatory deformation rheology to the sugar industry

USDA-ARS?s Scientific Manuscript database

Hard-to-boil (HTB) massecuites with markedly low heat transfer properties are a sporadic but continuing problem in Louisiana sugarcane factories. It usually occurs after severely deteriorated sugarcane stalks and trash have been delivered to a factory. Unfortunately, the specific cause of this phe...

The Game Factory: Using Cooperative Games to Promote Pro-Social Behaviour among Children

ERIC Educational Resources Information Center

Street, Helen; Hoppe, David; Kingsbury, David; Ma, Tony

2004-01-01

This study examines the use of a cooperative physical games program "The Game Factory" on social behaviour among children. Children are required to work together towards positive collective outcomes. A pretest-intervention-posttest design is used. Parents and teachers assessed 90 Australian primary school children in two experimental…

The Analysis of Completely Randomized Factorial Experiments When Observations Are Lost at Random.

ERIC Educational Resources Information Center

Hummel, Thomas J.

An investigation was conducted of the characteristics of two estimation procedures and corresponding test statistics used in the analysis of completely randomized factorial experiments when observations are lost at random. For one estimator, contrast coefficients for cell means did not involve the cell frequencies. For the other, contrast…

Undergraduate Students' Initial Conceptions of Factorials

ERIC Educational Resources Information Center

Lockwood, Elise; Erickson, Sarah

2017-01-01

Counting problems offer rich opportunities for students to engage in mathematical thinking, but they can be difficult for students to solve. In this paper, we present a study that examines student thinking about one concept within counting, factorials, which are a key aspect of many combinatorial ideas. In an effort to better understand students'…

Factorial study of rain garden design for nitrogen removal

EPA Science Inventory

Abstract Nitrate (〖NO〗_3^--N ) removal studies in bioretention systems showed great variability in removal rates and in some cases 〖NO〗_3^--N was exported. A 3-way factorial design (2 x 2 x 4) was devised for eight outdoor un-vegetated rain gardens to evaluate the effects of ...

On the Factorial Structure of the SAT and Implications for Next-Generation College Readiness Assessments

ERIC Educational Resources Information Center

Wiley, Edward W.; Shavelson, Richard J.; Kurpius, Amy A.

2014-01-01

The name "SAT" has become synonymous with college admissions testing; it has been dubbed "the gold standard." Numerous studies on its reliability and predictive validity show that the SAT predicts college performance beyond high school grade point average. Surprisingly, studies of the factorial structure of the current version…

More Powerful Tests of Simple Interaction Contrasts in the Two-Way Factorial Design

ERIC Educational Resources Information Center

Hancock, Gregory R.; McNeish, Daniel M.

2017-01-01

For the two-way factorial design in analysis of variance, the current article explicates and compares three methods for controlling the Type I error rate for all possible simple interaction contrasts following a statistically significant interaction, including a proposed modification to the Bonferroni procedure that increases the power of…

I'm Giving You the Chocolate Factory! 2017 President's Message

ERIC Educational Resources Information Center

Reeve, Edward M.

2017-01-01

In this article, the newly elected 2017-2018 President of the International Technology and Engineering Educators Association (ITEEA), Edward M. Reeve, presents his welcome message in the format of Willy Wonka giving Charlie the Chocolate Factory. Upon becoming a member of ITEEA, one automatically gets a "golden ticket" as a professional…

Learning Factory--Assembling Learning Content with a Framework

ERIC Educational Resources Information Center

Steininger, Peter

2016-01-01

Many of the challenges currently facing lectures are symptoms of problems with learning content creation, development and presentation. Learning Factory solves these problems by integrating critical innovations that have been proven over the last ten to twenty years in different industrial areas, but have not yet been brought or ported together in…

Improving the Welfare of Women Factory Workers: Lessons from Indonesia.

ERIC Educational Resources Information Center

White, Mary C.

1990-01-01

Attention to the quality of the working environment for women factory workers can make a real contribution to productivity. The example of an Indonesian project that introduced low-cost workplace improvements and provided health instruction shows the feasibility and effectiveness of such efforts, provided there is a clear commitment from…

Factorial Validity and Reliability of the Devereux Elementary School Behavior Rating Scale.

ERIC Educational Resources Information Center

Reynolds, William M.; Bernstein, Sydna M.

1982-01-01

The factorial validity and internal consistency reliability of the Devereux Elementary School Behavior Rating Scale were examined with a random sample of elementary school children. Given the problem of multicollinearity that was shown to exist among subscales, the authors suggest caution in the interpretation of Devereux subscales as discrete…

Training Factory Workers: Three Case Studies. Contractor Report.

ERIC Educational Resources Information Center

Hirschhorn, Larry D.

Case studies examined the context and impact of training in three factories: a bakery, a circuit assembly plant, and a plant that produces microchips. Cookie-Foods, Inc. used Statistical Process Control (SPC) and a course on problem solving to increase the operators' productivity. Impact of the SPC program was limited, because workers who…

Invariance in the Factor Structure of Translated Instruments: Multiple Group Confirmatory Factor Analysis and MIMIC Models

ERIC Educational Resources Information Center

Ayyad, Fatma

2011-01-01

When factorial invariance is established across translated forms of an instrument, the meaning of the construct crosses language/cultures. If factorial invariance is not established, score discrepancies may represent true language group differences or faulty translation. This study seeks to disentangle this by determining whether…

After the Flood

ERIC Educational Resources Information Center

Stanistreet, Paul

2007-01-01

When floodwater swept through the McVities biscuit factory in Carlisle in January 2005 few were confident that it would reopen. The factory, in the Caldewgate area of the city, was one of the first casualties of the flood, as water, nine feet deep in places, coursed trough the food preparation areas, destroying equipment and covering everything in…

Information-Processing Architectures in Multidimensional Classification: A Validation Test of the Systems Factorial Technology

ERIC Educational Resources Information Center

Fific, Mario; Nosofsky, Robert M.; Townsend, James T.

2008-01-01

A growing methodology, known as the systems factorial technology (SFT), is being developed to diagnose the types of information-processing architectures (serial, parallel, or coactive) and stopping rules (exhaustive or self-terminating) that operate in tasks of multidimensional perception. Whereas most previous applications of SFT have been in…

Assessing Character Strengths in Youth with Intellectual Disability: Reliability and Factorial Validity of the VIA-Youth

ERIC Educational Resources Information Center

Shogren, Karrie A.; Shaw, Leslie A.; Raley, Sheida K.; Wehmeyer, Michael L.; Niemiec, Ryan M.; Adkins, Megan

2018-01-01

This article reports the results of an examination of the endorsement, reliability, and factorial validity of the VIA--Youth and assessment of character strengths and virtues developed for the general population in youth with and without intellectual disability. Findings suggest that, generally, youth with intellectual disability endorsed…

29 CFR 779.347 - Exemption limited to “recognized retail establishment”; factories not exempt.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Exemption limited to ârecognized retail establishmentâ... Retail or Service Establishments Engaging in Manufacturing and Processing Activities; Section 13(a)(4) § 779.347 Exemption limited to “recognized retail establishment”; factories not exempt. The section 13(a...

29 CFR 779.347 - Exemption limited to “recognized retail establishment”; factories not exempt.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Exemption limited to ârecognized retail establishmentâ... Retail or Service Establishments Engaging in Manufacturing and Processing Activities; Section 13(a)(4) § 779.347 Exemption limited to “recognized retail establishment”; factories not exempt. The section 13(a...

29 CFR 779.347 - Exemption limited to “recognized retail establishment”; factories not exempt.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Exemption limited to ârecognized retail establishmentâ... Retail or Service Establishments Engaging in Manufacturing and Processing Activities; Section 13(a)(4) § 779.347 Exemption limited to “recognized retail establishment”; factories not exempt. The section 13(a...

29 CFR 779.347 - Exemption limited to “recognized retail establishment”; factories not exempt.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Exemption limited to ârecognized retail establishmentâ... Retail or Service Establishments Engaging in Manufacturing and Processing Activities; Section 13(a)(4) § 779.347 Exemption limited to “recognized retail establishment”; factories not exempt. The section 13(a...

A Sino-Finnish Initiative for Experimental Teaching Practices Using the Design Factory Pedagogical Platform

ERIC Educational Resources Information Center

Björklund, Tua A.; Nordström, Katrina M.; Clavert, Maria

2013-01-01

The paper presents a Sino-Finnish teaching initiative, including the design and experiences of a series of pedagogical workshops implemented at the Aalto-Tongji Design Factory (DF), Shanghai, China, and the experimentation plans collected from the 54 attending professors and teachers. The workshops aimed to encourage trying out interdisciplinary…

76 FR 17327 - 100th Anniversary of the Triangle Shirtwaist Factory Fire

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-29

... responsibility to provide a safe environment for all American workers. NOW, THEREFORE, I, BARACK OBAMA, President... since the Triangle factory fire, we are still fighting to provide adequate working conditions for all... collective bargaining as a tool to give workers a seat at the tables of power. Working Americans are the...

The Learning Factory.

ERIC Educational Resources Information Center

Alef, Edward R.; Berg, Daniel

This book looks at the administration of an academic institution as a learning factory which needs to be run like a business, competing with other businesses offering the same service. The book begins with a discussion of the concepts of the continuing education learning market, the playing fields and rules of the games, as well as the idea of…

Theoretical Development, Factorial Validity, and Reliability of the Online Graduate Mentoring Scale

ERIC Educational Resources Information Center

Crawford, Linda M.; Randolph, Justus J.; Yob, Iris M.

2014-01-01

In this study, we sought to confirm the theoretical framework underlying an Online Graduate Mentoring Scale by establishing the scale's factorial validity and reliability. Analysis of data received from doctoral students and alumni/ae of the College of Education of one large, online, accredited university reduced the initial theoretical…

Child Protection Decision Making: A Factorial Analysis Using Case Vignettes

ERIC Educational Resources Information Center

Stokes, Jacqueline; Schmidt, Glen

2012-01-01

This study explored decision making by child protection social workers in the province of British Columbia, Canada. A factorial survey method was used in which case vignettes were constructed by randomly assigning a number of key characteristics associated with decision making in child protection. Child protection social workers (n = 118) assessed…

Factorial Validity and Psychometric Examination of the Exercise Dependence Scale-Revised

ERIC Educational Resources Information Center

Downs, Danielle Symons; Hausenblas, Heather A.; Nigg, Claudio R.

2004-01-01

The research purposes were to examine the factorial and convergent validity, internal consistency, and test-retest reliability of the Exercise Dependence Scale (EDS). Two separate studies, containing a total of 1,263 college students, were undertaken to accomplish these purposes. Participants completed the EDS and measures of exercise behavior and…

Searching for New Physics at SuperB - The Super Flavor Factory

ScienceCinema

Hiltin, David

2018-01-05

SuperB – a Super Flavor Factory, an electron-positron collider with a luminosity of 1036 cm-2 s-1, can conduct conduct unique sensitive searches for New Physics effects such as lepton flavor violation and new sources of CP violation in the quark and lepton sectors.

An Epiphany in a Toilet Factory

ERIC Educational Resources Information Center

Cobb, Catlin

2009-01-01

In this article, the author shares her experiences of the universality of art making and artistic experience of being a dancer and teaching artist. She describes her performance at Kohler, a worldwide leader in plumbing products in Spartanburg, South Carolina, where she had an epiphany dancing in a toilet factory--a sudden, intuitive moment of…

Engineering Robustness of Microbial Cell Factories.

PubMed

Gong, Zhiwei; Nielsen, Jens; Zhou, Yongjin J

2017-10-01

Metabolic engineering and synthetic biology offer great prospects in developing microbial cell factories capable of converting renewable feedstocks into fuels, chemicals, food ingredients, and pharmaceuticals. However, prohibitively low production rate and mass concentration remain the major hurdles in industrial processes even though the biosynthetic pathways are comprehensively optimized. These limitations are caused by a variety of factors unamenable for host cell survival, such as harsh industrial conditions, fermentation inhibitors from biomass hydrolysates, and toxic compounds including metabolic intermediates and valuable target products. Therefore, engineered microbes with robust phenotypes is essential for achieving higher yield and productivity. In this review, the recent advances in engineering robustness and tolerance of cell factories is described to cope with these issues and briefly introduce novel strategies with great potential to enhance the robustness of cell factories, including metabolic pathway balancing, transporter engineering, and adaptive laboratory evolution. This review also highlights the integration of advanced systems and synthetic biology principles toward engineering the harmony of overall cell function, more than the specific pathways or enzymes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of effluent from a nitrogen fertilizer factory and a pulp mill on the distribution and abundance of Aeromonas hydrophila in Albemarle Sound, North Carolina.

PubMed Central

Hazen, T C; Esch, G W

1983-01-01

The density of Aeromonas hydrophila, standard count bacteria, fecal coliform bacteria, and 18 physical and chemical parameters were measured simultaneously at six sites for 12 months in Albemarle Sound, N.C. One site was above and two sites were below the discharge plume of a Kraft pulping process paper mill. The fourth site was above and the remaining two sites were below the discharge point of a nitrogen fertilizer factory. The impact of the pulp mill on water quality was acute, whereas that of the nitrogen fertilizer factory was chronic and much more subtle. Diffusion chamber studies indicated that A. hydrophila survival is increased by pulp mill effluent and decreased by nitrogen fertilizer factory effluent. From correlation and regression analysis, A. hydrophila was found to be directly affected by phytoplankton density and, thus, indirectly by concentrations of phosphate, nitrate, and total organic carbon. These two point sources are suspect as indirect causes of red-sore disease epizootics, a disease of fish caused by A. hydrophila. PMID:6297393

Generalized Subset Designs in Analytical Chemistry.

PubMed

Surowiec, Izabella; Vikström, Ludvig; Hector, Gustaf; Johansson, Erik; Vikström, Conny; Trygg, Johan

2017-06-20

Design of experiments (DOE) is an established methodology in research, development, manufacturing, and production for screening, optimization, and robustness testing. Two-level fractional factorial designs remain the preferred approach due to high information content while keeping the number of experiments low. These types of designs, however, have never been extended to a generalized multilevel reduced design type that would be capable to include both qualitative and quantitative factors. In this Article we describe a novel generalized fractional factorial design. In addition, it also provides complementary and balanced subdesigns analogous to a fold-over in two-level reduced factorial designs. We demonstrate how this design type can be applied with good results in three different applications in analytical chemistry including (a) multivariate calibration using microwave resonance spectroscopy for the determination of water in tablets, (b) stability study in drug product development, and (c) representative sample selection in clinical studies. This demonstrates the potential of generalized fractional factorial designs to be applied in many other areas of analytical chemistry where representative, balanced, and complementary subsets are required, especially when a combination of quantitative and qualitative factors at multiple levels exists.

Design Learning of Teaching Factory in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Putra, R. C.; Kusumah, I. H.; Komaro, M.; Rahayu, Y.; Asfiyanur, E. P.

2018-02-01

The industrial world that is the target of the process and learning outcomes of vocational high school (SMK) has its own character and nuance. Therefore, vocational education institutions in the learning process should be able to make the appropriate learning approach and in accordance with the industrial world. One approach to learning that is based on production and learning in the world of work is by industry-based learning or known as Teaching Factory, where in this model apply learning that involves direct students in goods or service activities are expected to have the quality so it is worth selling and accepted by consumers. The method used is descriptive approach. The purpose of this research is to get the design of the teaching factory based on the competency requirements of the graduates of the spouse industry, especially in the engineering department. The results of this study is expected to be one of the choice of model factory teaching in the field of machinery engineering in accordance with the products and competencies of the graduates that the industry needs.

Factorial correspondence analysis of fear-related behaviour traits in Japanese quail.

PubMed

Mignon-Grasteau, S; Roussot, O; Delaby, C; Faure, J M.; Mills, A; Leterrier, C; Guéméné, D; Constantin, P; Mills, M; Lepape, G; Beaumont, C

2003-02-28

Factorial correspondence analysis was performed on 341 quails from a F2 cross between two lines divergently selected on the duration of tonic immobility over 29 generations. Several fear- or stress-related traits were recorded, i.e. tonic immobility duration, number of inductions needed to induce tonic immobility, open-field behaviour (time spent walking, latency before first movement and number of defecations), asymmetry of tibia lengths and corticosterone concentration after restraint stress. Variables were categorised in classes and analysed by factorial correspondence analysis. The first axis was mostly described by open-field behaviour, and the second by tonic immobility traits (duration of tonic immobility and number of inductions), which showed that these behaviours were almost independent. No relationship was found between axes of the factorial correspondence analysis and corticosterone concentration or asymmetry of tibia lengths, showing that these variables reflected other characteristics of stress susceptibility than those described by tonic immobility and open-field behaviour. These results show that reaction to stress of quails is a multidimensional trait and cannot be summarised by one trait.

[From manual workshop to international standard maker: exploration on production standard of acupuncture needle by Chengjiang acupuncture school].

PubMed

Cheng, Jie; Cao, Yang; Xia, Youbing

2015-02-01

ABSTRACT The exploration course on production standard of acupuncture needle by Chengjiang acupuncture school is reviewed in this paper. After new China was established, acupuncture needle standard was unified by Mr. CHENG Dan-an, which guided Suzhou Hua Erfang (predecessor of Suzhou Medical Supplies Factory) to make the quality standards and testing methods of acupuncture needle and improved the production process to make the modern acupuncture needle. Based on this, Suzhou Medical Supplies Factory followed the time development pace, ac tively introduced new technology, carried out technological innovation, and constantly improved the level of production technology, as a result, it gradually developed into one of the world's largest acupuncture needle production suppliers. Meanwhile, after establishing China's first national standard on acupuncture needle (GB 2024-1980), the Suzhou Medical Supplies Factory took the lead to draft "ISO) 17218:2014 the disposable use asepsis acupuncture needle", which was officially published as an international standard. The Suzhou Medical Supplies Factory developed from a manual workshop to an international standard maker.

Female reproductive health in two lamp factories: effects of exposure to inorganic mercury vapour and stress factors.

PubMed

De Rosis, F; Anastasio, S P; Selvaggi, L; Beltrame, A; Moriani, G

1985-07-01

To evaluate the possible influence of mercury vapour on female reproduction, 153 women working in a mercury vapour lamp factory have been compared with 193 women employed in another factory of the same company, where mercury was not used. Both groups of subjects were exposed to stress factors (noise, rhythms of production, and shift work). The production process has been analysed by inspection of the plants and by collective discussions with "homogeneous groups" of workers; a retrospective inquiry into work history and reproductive health events has been subsequently performed by an individual interview. Women exposed to mercury vapour currently not exceeding the time weighted average air concentration of 0.01 mg/m3 declared higher prevalence and incidence rates of menstrual disorders, primary subfecundity, and adverse pregnancy outcome; however, the progression of these problems with the level of exposure to mercury inside the same factory was not always clear. The results of this study neither prove nor exclude the possibility that occupational exposure to this concentration of mercury has a negative effect on female reproduction.

Visible light assisted photoelectrocatalytic degradation of sugarcane factory wastewater by sprayed CZTS thin films

NASA Astrophysics Data System (ADS)

Hunge, Y. M.; Mahadik, M. A.; Patil, V. L.; Pawar, A. R.; Gadakh, S. R.; Moholkar, A. V.; Patil, P. S.; Bhosale, C. H.

2017-12-01

Highly crystalline Cu2ZnSnS4 (CZTS) thin films have been deposited onto glass and FTO coated glass substrates by simple chemical spray-pyrolysis technique. It is an important material for solar energy conversion through the both photovoltaics and photocatalysis. The effect of substrate temperatures on the physico-chemical properties of the CZTS films is studied. The XRD study shows the formation of single phase CZTS with kesterite structure. FE-SEM analysis reveals nano flakes architecture with pin-hole and crake free surface with more adherent. The film deposited at optimized substrate temperature exhibits optical band gap energy of 1.90 eV, which lies in the visible region of the solar spectrum and useful for photocatalysis application. The photoelectrocatalytic activities of the large surface area (10 × 10 cm2) deposited CZTS thin film photocatalysts were evaluated for the degradation of sugarcane factory wastewater under visible light irradiation. The results show that the CZTS thin film photocatalyst exhibited about 90% degradation of sugar cane factory wastewater. The mineralization of sugarcane factory wastewater is studied by measuring chemical oxygen demand (COD) values.

App Factory: A flexible approach to rehabilitation engineering in an era of rapid technology advancement.

PubMed

Jones, Michael; Mueller, James; Morris, John

2017-01-01

This article describes a flexible and effective approach to research and development in an era of rapid technological advancement. The approach relies on secondary dispersal of grant funds to commercial developers through a competitive selection process. This "App Factory" model balances the practical reliance on multi-year funding needed to sustain a rehabilitation engineering research center (RERC), with the need for agility and adaptability of development efforts undertaken in a rapidly changing technology environment. This approach also allows us to take advantage of technical expertise needed to accomplish a particular development task, and provides incentives to deliver successful products in a cost-effective manner. In this article, we describe the App Factory structure, process, and results achieved to date; and we discuss the lessons learned and the potential relevance of this approach for other grant-funded research and development efforts. Data presented on the direct costs and number of downloads of the 16 app development projects funded in the App Factory's first 3 years show that it can be an effective means for supporting focused, short-term assistive technology development projects.

Sexual behavior and perceived risk of HIV/AIDS among young migrant factory workers in Nepal.

PubMed

Puri, M; Cleland, J

2006-03-01

To analyze the sexual behavior, perceived risk of contracting STIs and HIV/AIDS, and protective behaviors of migrant workers aged 14-19 years in carpet and garment factories in the Kathmandu Valley, Nepal. A common assumption in Nepal is that young migrant workers experience an increase in vulnerability. Moving away from the social controls of family and community, they become exposed to a mixed-gender environment and therefore might initiate sex earlier or have more casual encounters than might otherwise be the case. The analysis is based on a representative sample survey of 1050 factory workers. Information was also obtained from 23 in-depth case histories. Both bivarite and multivariate techniques were applied to identify the factors associated with involvement in risky sexual behavior. Despite religious and cultural restrictions, one in five boys and one in eight unmarried girls reported experience of sexual intercourse. Early sexual experimentation, multiple partners, and low and irregular use of condoms are not uncommon. Instances of sexual exploitation by factory owners or managers were documented but were rare. Most nonregular sex partners were described as friends from the same factory or community. Despite high-risk behavior, relatively few young people considered themselves to be at risk of getting STIs or HIV/AIDS. Information on the possible consequences of unsafe sex is inadequate. Programs aimed at promotion of safer sex practices and life skill training that facilitates communication and utilization of sexual health services should target vulnerable migrant young people.

Epidemiology of Skin Disease in an Automobile Factory*

PubMed Central

Newhouse, Muriel L.

1964-01-01

A survey was made of a random sample of workers from the machine shops, assembly lines, and stock and store departments of an automobile factory. Among the 1,223 men seen, representing 97% of the sample, the prevalence of non-infective skin diseases was 14·5%. Skin diseases were classified into four groups: `dermatitis' and `folliculitis' of occupational origin, endogenous `eczemas', and miscellaneous skin diseases. Slightly more than half of all the skin diseases seen were considered to be occupational in origin. In this population the prevalence of skin disease was more than four times that based on patients attending the factory medical department. An unsuspected cause of allergic dermatitis was found on the assembly lines, where the incidence of dermatitis was significantly higher than among the non-production workers. The prevalence of folliculitis was significantly higher among production than non-production workers. There was no significant difference in the prevalence of `eczema' or the miscellaneous skin diseases in the various occupational groups. Among European workers fair men were more prone to skin disease than darker men. In another factory, a West Indian and Asiatic group of workers had a significantly lower prevalence of skin diseases than a group of Europeans doing similar work. Folliculitis was more prevalent among the younger workers and those recently employed in the factory; there was no obvious association between age and length of service and the occurrence of other types of skin disease. PMID:14249898

Occupational noise-induced hearing loss in auto part factory workers in welding units in Thailand.

PubMed

Sriopas, Apiradee; Chapman, Robert S; Sutammasa, Saravudh; Siriwong, Wattasit

2017-01-24

Most workers in auto part factories in Thailand are usually exposed to excessive noise in their workplace. This study aimed to assess the level of occupational noise-induced hearing loss and investigate risk factors causing hearing loss in auto part factory workers in the welding units in Thailand. This was a cross-sectional study. One hundred eighty subjects were recruited from 356 workers in the welding unit of three factories. Sixty eligible subjects in each factory were selected by systemic random sampling. The subjects were interviewed using a face-to-face questionnaire. Noise exposure levels and audiograms were measured by a noise dosimeter and an audiometer, respectively. The findings confirmed that noise exposure levels of 86-90 dB (A) and exceeding 90 dB (A) significantly increased the risk of hearing loss in either ear. A noise exposure level exceeding 90 dB (A) significantly increased the prevalence of hearing loss in both ears. Regarding, a 10-pack-year smoking history increased the prevalence of hearing loss in either ear or both ears. In addition, subjects with employment duration exceeding 10 years significantly developed hearing loss in either ear. The engineering control or personal control by wearing hearing protection device should be used to decrease noise exposure levels lower than 85 dB (A) for 8 h. Moreover, if the exposure level reaches 85 dB (A) for 8 h, the employer needs to implement a hearing conservation program in the workplace.

[Detection of occupational hazards in a large shipbuilding factory].

PubMed

Du, Weijia; Wang, Zhi; Zhang, Hai; Zhou, Liping; Huang, Minzhi; Liu, Yimin

2014-03-01

To provide evidence for the prevention and treatment of occupational diseases by the analysis of existing major occupational hazards and health conditions of workers in a large shipbuilding factory. Field investigation of occupational conditions was conducted to examine the existence of occupational hazards from 2009 to 2012 in a large shipbuilding factory, and then the results of physical examination among its workers were analyzed. Other than the metal dust (total dust), the levels of other dusts and manganese dioxide were beyond the national standard to various degrees, and through a sampling point detection, it was found that the levels of manganese dioxide exceeded the standard by 42.8%. The maximum time-weighted average concentration in individuals was 27.927 mg/m(3), much higher than the national standard limit. For harmful gas detection in individuals, xylene was 38.4%above the standard level (the highest concentration reached 1447.7 mg/m(3)); moreover, both toluene and ethylbenzene exceeded the national standard at different levels. Among the noise-exposed workers, 71%worked in the environment where the daily noise was above the limit of the national standard (85 dB). Physical examinations in 2010 and 2012 showed that the abnormal rate of audiometry in workers was higher than 15%. Dust (total dust), manganese dioxide, benzene, and noise are the main occupational hazards among the workers in the large shipbuilding factory, and strict protection and control for these hazards should be implemented for the workers in the factory.

Occupational hazards and safety measures amongst the paint factory workers in lagos, Nigeria.

PubMed

Awodele, Olufunsho; Popoola, Temidayo D; Ogbudu, Bawo S; Akinyede, Akin; Coker, Herbert A B; Akintonwa, Alade

2014-06-01

The manufacture of paint involves a variety of processes that present with medical hazards. Safety initiatives are hence introduced to limit hazard exposures and promote workplace safety. This aim of this study is to assess the use of available control measures/initiatives in selected paint factories in Lagos West Senatorial District, Nigeria. A total of 400 randomly selected paint factory workers were involved in the study. A well-structured World Health Organization standard questionnaire was designed and distributed to the workers to elicit information on awareness to occupational hazards, use of personal protective devices, and commonly experienced adverse symptoms. Urine samples were obtained from 50 workers randomly selected from these 400 participants, and the concentrations of the heavy metals (lead, cadmium, arsenic, and chromium) were determined using atomic absorption spectroscopy. The results show that 72.5% of the respondents are aware of the hazards associated with their jobs; 30% have had formal training on hazards and safety measures; 40% do not use personal protective devices, and 90% of the respondents reported symptoms relating to hazard exposure. There was a statistically significant (p < 0.05) increase in the mean heavy metal concentrations in the urine samples obtained from paint factory workers as compared with nonfactory workers. The need to develop effective frameworks that will initiate the integration and ensure implementation of safety regulations in paint factories is evident. Where these exist, there is a need to promote adherence to these practice guidelines.

A workplace intervention program and the increase in HIV knowledge, perceived accessibility and use of condoms among young factory workers in Thailand.

PubMed

Chamratrithirong, Aphichat; Ford, Kathleen; Punpuing, Sureeporn; Prasartkul, Pramote

2017-12-01

Vulnerability to Human Immunodeficiency Virus (HIV) infection among factory workers is a global problem. This study investigated the effectiveness of an intervention to increase AIDS knowledge, perceived accessibility to condoms and condom use among young factory workers in Thailand. The intervention was a workplace program designed to engage the private sector in HIV prevention. A cross-sectional survey conducted in 2008 to measure program outcomes in factories in Thailand was used in this study. The workplace intervention included the development of policies for management of HIV-positive employees, training sessions for managers and workers, and distribution of educational materials and condoms. A multi-level analysis was used to investigate the effect of HIV/AIDS prevention program components at the workplace on HIV/AIDS knowledge, perceived accessibility to condoms and condom use with regular sexual partners among 699 young factory workers (aged 18-24 years), controlling for their individual socio-demographic characteristics. Interventions related to the management and services component including workplace AIDS policy formulation, condom services programs and behavioral change campaigns were found to be significantly related to increased AIDS knowledge, perceived accessibility to condoms and condom use with regular partners. The effect of the HIV/AIDS training for managers, peer leaders and workers was positive but not statistically significant. With some revision of program components, scaling up of workplace interventions and the engagement of the private sector in HIV prevention should be seriously considered.

Permethrin-Treated Clothing as Protection against the Dengue Vector, Aedes aegypti: Extent and Duration of Protection

PubMed Central

DeRaedt Banks, Sarah; Orsborne, James; Gezan, Salvador A.; Kaur, Harparkash; Wilder-Smith, Annelies; Lindsey, Steve W.; Logan, James G.

2015-01-01

Introduction Dengue transmission by the mosquito vector, Aedes aegypti, occurs indoors and outdoors during the day. Personal protection of individuals, particularly when outside, is challenging. Here we assess the efficacy and durability of different types of insecticide-treated clothing on laboratory-reared Ae. aegypti. Methods Standardised World Health Organisation Pesticide Evaluation Scheme (WHOPES) cone tests and arm-in-cage assays were used to assess knockdown (KD) and mortality of Ae. aegypti tested against factory-treated fabric, home-dipped fabric and microencapsulated fabric. Based on the testing of these three different treatment types, the most protective was selected for further analysis using arm-in cage assays with the effect of washing, ultra-violet light, and ironing investigated using high pressure liquid chromatography. Results Efficacy varied between the microencapsulated and factory dipped fabrics in cone testing. Factory-dipped clothing showed the greatest effect on KD (3 min 38.1%; 1 hour 96.5%) and mortality (97.1%) with no significant difference between this and the factory dipped school uniforms. Factory-dipped clothing was therefore selected for further testing. Factory dipped clothing provided 59% (95% CI = 49.2%– 66.9%) reduction in landing and a 100% reduction in biting in arm-in-cage tests. Washing duration and technique had a significant effect, with insecticidal longevity shown to be greater with machine washing (LW50 = 33.4) compared to simulated hand washing (LW50 = 17.6). Ironing significantly reduced permethrin content after 1 week of simulated use, with a 96.7% decrease after 3 months although UV exposure did not reduce permethrin content within clothing significantly after 3 months simulated use. Conclusion Permethrin-treated clothing may be a promising intervention in reducing dengue transmission. However, our findings also suggest that clothing may provide only short-term protection due to the effect of washing and ironing, highlighting the need for improved fabric treatment techniques. PMID:26440967

Permethrin-Treated Clothing as Protection against the Dengue Vector, Aedes aegypti: Extent and Duration of Protection.

PubMed

DeRaedt Banks, Sarah; Orsborne, James; Gezan, Salvador A; Kaur, Harparkash; Wilder-Smith, Annelies; Lindsey, Steve W; Logan, James G

2015-01-01

Dengue transmission by the mosquito vector, Aedes aegypti, occurs indoors and outdoors during the day. Personal protection of individuals, particularly when outside, is challenging. Here we assess the efficacy and durability of different types of insecticide-treated clothing on laboratory-reared Ae. aegypti. Standardised World Health Organisation Pesticide Evaluation Scheme (WHOPES) cone tests and arm-in-cage assays were used to assess knockdown (KD) and mortality of Ae. aegypti tested against factory-treated fabric, home-dipped fabric and microencapsulated fabric. Based on the testing of these three different treatment types, the most protective was selected for further analysis using arm-in cage assays with the effect of washing, ultra-violet light, and ironing investigated using high pressure liquid chromatography. Efficacy varied between the microencapsulated and factory dipped fabrics in cone testing. Factory-dipped clothing showed the greatest effect on KD (3 min 38.1%; 1 hour 96.5%) and mortality (97.1%) with no significant difference between this and the factory dipped school uniforms. Factory-dipped clothing was therefore selected for further testing. Factory dipped clothing provided 59% (95% CI = 49.2%- 66.9%) reduction in landing and a 100% reduction in biting in arm-in-cage tests. Washing duration and technique had a significant effect, with insecticidal longevity shown to be greater with machine washing (LW50 = 33.4) compared to simulated hand washing (LW50 = 17.6). Ironing significantly reduced permethrin content after 1 week of simulated use, with a 96.7% decrease after 3 months although UV exposure did not reduce permethrin content within clothing significantly after 3 months simulated use. Permethrin-treated clothing may be a promising intervention in reducing dengue transmission. However, our findings also suggest that clothing may provide only short-term protection due to the effect of washing and ironing, highlighting the need for improved fabric treatment techniques.

Assessing the applicability of the Taguchi design method to an interrill erosion study

NASA Astrophysics Data System (ADS)

Zhang, F. B.; Wang, Z. L.; Yang, M. Y.

2015-02-01

Full-factorial experimental designs have been used in soil erosion studies, but are time, cost and labor intensive, and sometimes they are impossible to conduct due to the increasing number of factors and their levels to consider. The Taguchi design is a simple, economical and efficient statistical tool that only uses a portion of the total possible factorial combinations to obtain the results of a study. Soil erosion studies that use the Taguchi design are scarce and no comparisons with full-factorial designs have been made. In this paper, a series of simulated rainfall experiments using a full-factorial design of five slope lengths (0.4, 0.8, 1.2, 1.6, and 2 m), five slope gradients (18%, 27%, 36%, 48%, and 58%), and five rainfall intensities (48, 62.4, 102, 149, and 170 mm h-1) were conducted. Validation of the applicability of a Taguchi design to interrill erosion experiments was achieved by extracting data from the full dataset according to a theoretical Taguchi design. The statistical parameters for the mean quasi-steady state erosion and runoff rates of each test, the optimum conditions for producing maximum erosion and runoff, and the main effect and percentage contribution of each factor obtained from the full-factorial and Taguchi designs were compared. Both designs generated almost identical results. Using the experimental data from the Taguchi design, it was possible to accurately predict the erosion and runoff rates under the conditions that had been excluded from the Taguchi design. All of the results obtained from analyzing the experimental data for both designs indicated that the Taguchi design could be applied to interrill erosion studies and could replace full-factorial designs. This would save time, labor and costs by generally reducing the number of tests to be conducted. Further work should test the applicability of the Taguchi design to a wider range of conditions.

Development of new multilocus variable number of tandem repeat analysis (MLVA) for Listeria innocua and its application in a food processing plant.

PubMed

Takahashi, Hajime; Ohshima, Chihiro; Nakagawa, Miku; Thanatsang, Krittaporn; Phraephaisarn, Chirapiphat; Chaturongkasumrit, Yuphakhun; Keeratipibul, Suwimon; Kuda, Takashi; Kimura, Bon

2014-01-01

Listeria innocua is an important hygiene indicator bacterium in food industries because it behaves similar to Listeria monocytogenes, which is pathogenic to humans. PFGE is often used to characterize bacterial strains and to track contamination source. However, because PFGE is an expensive, complicated, time-consuming protocol, and poses difficulty in data sharing, development of a new typing method is necessary. MLVA is a technique that identifies bacterial strains on the basis of the number of tandem repeats present in the genome varies depending on the strains. MLVA has gained attention due to its high reproducibility and ease of data sharing. In this study, we developed a MLVA protocol to assess L. innocua and evaluated it by tracking the contamination source of L. innocua in an actual food manufacturing factory by typing the bacterial strains isolated from the factory. Three VNTR regions of the L. innocua genome were chosen for use in the MLVA. The number of repeat units in each VNTR region was calculated based on the results of PCR product analysis using capillary electrophoresis (CE). The calculated number of repetitions was compared with the results of the gene sequence analysis to demonstrate the accuracy of the CE repeat number analysis. The developed technique was evaluated using 60 L. innocua strains isolated from a food factory. These 60 strains were classified into 11 patterns using MLVA. Many of the strains were classified into ST-6, revealing that this MLVA strain type can contaminate each manufacturing process in the factory. The MLVA protocol developed in this study for L. innocua allowed rapid and easy analysis through the use of CE. This technique was found to be very useful in hygiene control in factories because it allowed us to track contamination sources and provided information regarding whether the bacteria were present in the factories.

Kaposi's Sarcoma-Associated Herpesvirus Hijacks RNA Polymerase II To Create a Viral Transcriptional Factory

PubMed Central

Chen, Christopher Phillip; Lyu, Yuanzhi; Chuang, Frank; Nakano, Kazushi; Izumiya, Chie; Jin, Di; Campbell, Mel

2017-01-01

ABSTRACT Locally concentrated nuclear factors ensure efficient binding to DNA templates, facilitating RNA polymerase II recruitment and frequent reutilization of stable preinitiation complexes. We have uncovered a mechanism for effective viral transcription by focal assembly of RNA polymerase II around Kaposi's sarcoma-associated herpesvirus (KSHV) genomes in the host cell nucleus. Using immunofluorescence labeling of latent nuclear antigen (LANA) protein, together with fluorescence in situ RNA hybridization (RNA-FISH) of the intron region of immediate early transcripts, we visualized active transcription of viral genomes in naturally infected cells. At the single-cell level, we found that not all episomes were uniformly transcribed following reactivation stimuli. However, those episomes that were being transcribed would spontaneously aggregate to form transcriptional “factories,” which recruited a significant fraction of cellular RNA polymerase II. Focal assembly of “viral transcriptional factories” decreased the pool of cellular RNA polymerase II available for cellular gene transcription, which consequently impaired cellular gene expression globally, with the exception of selected ones. The viral transcriptional factories localized with replicating viral genomic DNAs. The observed colocalization of viral transcriptional factories with replicating viral genomic DNA suggests that KSHV assembles an “all-in-one” factory for both gene transcription and DNA replication. We propose that the assembly of RNA polymerase II around viral episomes in the nucleus may be a previously unexplored aspect of KSHV gene regulation by confiscation of a limited supply of RNA polymerase II in infected cells. IMPORTANCE B cells infected with Kaposi's sarcoma-associated herpesvirus (KSHV) harbor multiple copies of the KSHV genome in the form of episomes. Three-dimensional imaging of viral gene expression in the nucleus allows us to study interactions and changes in the physical distribution of these episomes following stimulation. The results showed heterogeneity in the responses of individual KSHV episomes to stimuli within a single reactivating cell; those episomes that did respond to stimulation, aggregated within large domains that appear to function as viral transcription factories. A significant portion of cellular RNA polymerase II was trapped in these factories and served to transcribe viral genomes, which coincided with an overall decrease in cellular gene expression. Our findings uncover a strategy of KSHV gene regulation through focal assembly of KSHV episomes and a molecular mechanism of late gene expression. PMID:28331082

Genome sequence of Clostridium tunisiense TJ, isolated from drain sediment from a pesticide factory.

PubMed

Sun, Lili; Wang, Yu; Yu, Chunyan; Zhao, Yongqin; Gan, Yinbo

2012-12-01

Clostridium tunisiense is a Gram-positive, obligate anaerobe that was first isolated in an anaerobic environment under eutrophication. Here we report the first genome sequence of the Clostridium tunisiense TJ isolated from drain sediment of a pesticide factory in Tianjin, China. The genome is of great importance for both basic and application research.

USSR Report Agriculture.

DTIC Science & Technology

1986-04-24

and its intensification, especially in such branches as poultry raising and swine breeding, have become possible as a result of the rapid development...vitamins and other components are being allocated to large . livestock husbandry complexes and poultry factories mainly for the production of mixed...microelements and other biologically active substances). Analysis has shown that large livestock complexes and poultry factories, owing to the low

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bevan, A. J.; Golob, B.; Mannel, Th.

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.

The influence of tropical adaptation on plasma concentrations of insulin-like growth factor-I in purebred and crossbred beef cattle

USDA-ARS?s Scientific Manuscript database

In an effort to determine whether tropical adaptation influences circulating concentrations of the growth-related hormone, insulin-like growth factor-I (IGF-I), 3-breed diallel matings were conducted using temperate Bos taurus (A; Angus), tropical Bos indicus (B; Brahman), and tropical Bos taurus (R...

The Factorial Survey: Design Selection and its Impact on Reliability and Internal Validity

ERIC Educational Resources Information Center

Dülmer, Hermann

2016-01-01

The factorial survey is an experimental design consisting of varying situations (vignettes) that have to be judged by respondents. For more complex research questions, it quickly becomes impossible for an individual respondent to judge all vignettes. To overcome this problem, random designs are recommended most of the time, whereas quota designs…

Education, Training and Productivity: A Study of Skilled Workers in Two Factories in South India.

ERIC Educational Resources Information Center

Fuller, William P.

To examine the contributions of specific kinds of occupational training to the productivity of workers with different levels of formal schooling, interviews were used to collect data on general education, trade training, work experience, environmental characteristics, and general ability from 598 turners, millers, and grinders in two factories in…

Using Job Analytic Perceptions to Predict Stressor Levels among Factory Supervisors.

ERIC Educational Resources Information Center

Love, Kevin G.; And Others

Job stress is recognized as a primary roadblock to achieving job satisfaction. In order to investigate the linkage between important job characteristics and stressor levels, 378 factory supervisors (aged 45-54; 89 percent male; 93 percent white with an average of 21 years with the company) completed a two-part job analysis questionnaire. In the…

Working in a Hose Building Factory. Youth Training Scheme. Core Exemplar Work Based Project.

ERIC Educational Resources Information Center

Further Education Staff Coll., Blagdon (England).

This trainer's guide is intended to assist supervisors of work-based career training projects in helping students learn about the operations of a marine hose factory, requisition supplies, rewarp nylon binders, determine the cost of material depreciation, communicate with coworkers, and learn about health and safety procedures. Though specific to…

Using Roald Dahl's "Charlie and the Chocolate Factory" to Teach Different Recruitment and Selection Paradigms

ERIC Educational Resources Information Center

Billsberry, Jon; Gilbert, Louise H.

2008-01-01

This article makes a case for using Roald Dahl's children's fantasy and morality tale "Charlie and the Chocolate Factory" to teach recruitment and selection. It draws attention to its relevance in illustrating and explaining three different recruitment and selection paradigms: psychometric, social process, and fit. It argues that the use of this…

Pedagogical and Social Climate in School Questionnaire: Factorial Validity and Reliability of the Teacher Version

ERIC Educational Resources Information Center

Dimitrova, Radosveta; Ferrer-Wreder, Laura; Galanti, Maria Rosaria

2016-01-01

This study evaluated the factorial structure of the Pedagogical and Social Climate in School (PESOC) questionnaire among 307 teachers in Bulgaria. The teacher edition of PESOC consists of 11 scales (i.e., Expectations for Students, Unity Among Teachers, Approach to Students, Basic Assumptions About Students' Ability to Learn, School-Home…

Clustering Words to Match Conditions: An Algorithm for Stimuli Selection in Factorial Designs

ERIC Educational Resources Information Center

Guasch, Marc; Haro, Juan; Boada, Roger

2017-01-01

With the increasing refinement of language processing models and the new discoveries about which variables can modulate these processes, stimuli selection for experiments with a factorial design is becoming a tough task. Selecting sets of words that differ in one variable, while matching these same words into dozens of other confounding variables…

Self-Constructs and Anxiety Across Cultures. Research Report. ETS RR-09-12

ERIC Educational Resources Information Center

Lee, Jihyun

2009-01-01

This study examined the factorial structure of three related constructs, math self-concept, math self-efficacy, and math anxiety, across 41 countries. One factorial structure was achieved at both between- and within-country levels. Within-country variations of the self-constructs were also noted in relation to math performance: Self-concept showed…

The Chinese Family Assessment Instrument (C-FAI): Hierarchical Confirmatory Factor Analyses and Factorial Invariance

ERIC Educational Resources Information Center

Shek, Daniel T. L.; Ma, Cecilia M. S.

2010-01-01

Objective: This paper examines the dimensionality and factorial invariance of the Chinese Family Assessment Instrument (C-FAI) using multigroup confirmatory factor analyses (MCFAs). Method: A total of 3,649 students responded to the C-FAI in a community survey. Results: Results showed that there are five dimensions of the C-FAI (communication,…

Performance of back-primed and factory-finished hardboard lap siding in southern Florida

Treesearch

Charles. Carll; Mark. Knaebe; Vyto. Malinauskas; Peter. Sotos; Anton. TenWolde

2000-01-01

Because of performance problems with hardboard siding in southern Florida, the U.S. Department of Housing and Urban Development (HUD) proposed a local standard requiring prefinishing of siding and priming of all siding surfaces, including the back. However, the effectiveness of these practices was questioned. To determine if back-priming or factory finishing improves...

An Archeological Overview and Management Plan for the Tarheel Army Missile Plant Alamance County, North Carolina.

DTIC Science & Technology

1984-05-21

factory planning engineer, noted that bedrock lies about 22 feet be- low the surface in the eastern portion of the main plant area, but had not...Carolina Press. Lee, James B. 1983. Personal communication. Factory Planning Engineer, Western Electric Company, Tarheel Army Missile Plant. Lefl1cr, Hugh

Factorial Structure of Rosenberg's Self-Esteem Scale among Crack-Cocaine Drug Users.

ERIC Educational Resources Information Center

Wang, Jichuan; Siegal, Harvey A.; Falck, Russell S.; Carlson, Robert G.

2001-01-01

Used nine different confirmatory factor analysis models to test the factorial structure of Rosenberg's (M. Rosenberg, 1965) self-esteem scale with a sample of 430 crack-cocaine users. Results partly support earlier research to show a single global self-esteem factor underlying responses to the Rosenberg scale, method effects associated with item…

The Impact of Technology on Work: The Factory of the Future Is Here Now.

ERIC Educational Resources Information Center

Fedrau, Ruth; Balfe, Kevin

1986-01-01

Explores the nature of some important technological changes occurring in the factory, as well as their impact on supervisor and worker roles, skills, and relationships. Discusses changes in production systems and technology, resulting changes on the plant floor, the need for retraining in the plants, and implications for employee skill…

Factorial Invariance of the Asian American Family Conflicts Scale across Ethnicity, Generational Status, Sex, and Nationality

ERIC Educational Resources Information Center

Miller, Matthew J.; Lee, Richard M.

2009-01-01

The factorial invariance of the Asian American Family Conflicts Scale-Likelihood (FCS-L) was examined in a sample of 1,012 participants. Results support the use of the FCS-L in future research with diverse Asian subgroups. Limitations and future directions for research are discussed. (Contains 7 tables and 1 note.)

Tributes beyond Words: Art Educators' Use of Textiles to Memorialize the Triangle Shirtwaist Factory Fire

ERIC Educational Resources Information Center

Mercurio, Mia Lynn; Randall, Régine

2016-01-01

Through the study of The Triangle Shirtwaist Factory fire, pre-service art teachers learn the about interdisciplinary design and the importance of using discipline-specific literacy strategies alongside the materials and methods of their craft. The creativity and enthusiasm with which these preservice teachers approached the work convinced us that…

A Methodology for the Assessment of Experiential Learning Lean: The Lean Experience Factory Study

ERIC Educational Resources Information Center

De Zan, Giovanni; De Toni, Alberto Felice; Fornasier, Andrea; Battistella, Cinzia

2015-01-01

Purpose: The purpose of this paper is to present a methodology to assess the experiential learning processes of learning lean in an innovative learning environment: the lean model factories. Design/methodology/approach: A literature review on learning and lean management literatures was carried out to design the methodology. Then, a case study…

Turkish Version of the Survey of Attitudes toward Statistics: Factorial Structure Invariance by Gender

ERIC Educational Resources Information Center

Sarikaya, Esma Emmioglu; Ok, Ahmet; Aydin, Yesim Capa; Schau, Candace

2018-01-01

This study examines factorial structure and the gender invariance of the Turkish version of the Survey of Attitudes toward Statistics (SATS-36). The SATS-36 has 36 items measuring six components: affect, cognitive competence, value, difficulty, effort, and interest. Data were collected from 347 university students. Results showed that the Turkish…

Characteristics of factory-grade hardwood logs delivered to Appalachian sawmills

Treesearch

Curtis D. Goho; Paul S. Wysor; Paul S. Wysor

1970-01-01

Until now, information about the characteristics of sawlogs delivered to Appalachian sawmills has been generally unavailable. We know what the standing timber is like, from forest-survey data. But this paper covers a different spectrum: the frequency distributions-by size, grade, volume, and species group-of factory-grade logs actually harvested and delivered to the...

Aztec Middle College: High School Alternatives in Community Colleges

ERIC Educational Resources Information Center

Olsen, Lynette

2010-01-01

The traditional high school model derived from the factory deficit model of the early 1900s has left many students, mainly minorities and/or low socioeconomic students, disenfranchised. This is evident in the poor school performance and high dropout rates of such students. Whereas the factory deficit model was created to promote only a few high…

78 FR 15699 - Certain Frozen Warmwater Shrimp From the Socialist Republic of Vietnam: Preliminary Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

... Seafood Factory, aka Hoang Phong Seafood Factory, aka UTXICO Viet Foods Co., Ltd., aka 0.00 Nam Hai... Minh Phu Group,\\1\\ and Nha Trang Seafoods,\\2\\ the two mandatory respondents, and Quoc Viet,\\3\\ the... Seafoods''). \\3\\ Quoc Viet Seaproducts Processing Trading and Import-Export Co., Ltd. (``Quoc Viet''). \\4...

Measurement Invariance of the Counselor Burnout Inventory across Cultures: A Comparison of U.S. and Korean Counselors

ERIC Educational Resources Information Center

Carrola, Paul A.; Yu, Kumlan; Sass, Daniel A.; Lee, Sang Min

2012-01-01

This study assessed scores from the Counselor Burnout Inventory for factorial validity, convergent and discriminant validity, internal consistency reliability, and measurement invariance across U.S. and Korean counselors. Although evidence existed for factorial validity across both groups, mixed results emerged for the other forms of validity and…

No Child Left Behind: Factory Models and Business Paradigms

ERIC Educational Resources Information Center

Johnson, Andrew P.

2006-01-01

Because No Child Left Behind (NCLB) is not based on educational research or research-based theory, it offers no new innovations nor does anything to improve the fundamental quality of education. NCLB is built on a rigid, outdated factory model in which students step onto a thirteen-year conveyor belt in kindergarten and progress slowly forward,…

Performing Contrast Analysis in Factorial Designs: From NHST to Confidence Intervals and Beyond

ERIC Educational Resources Information Center

Wiens, Stefan; Nilsson, Mats E.

2017-01-01

Because of the continuing debates about statistics, many researchers may feel confused about how to analyze and interpret data. Current guidelines in psychology advocate the use of effect sizes and confidence intervals (CIs). However, researchers may be unsure about how to extract effect sizes from factorial designs. Contrast analysis is helpful…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai

Similar to a super B-factory, a circular Higgs factory (CHF) will require strong focusing systems near the interaction points and a low-emittance lattice in the arcs to achieve a factory luminosity. At electron beam energy of 125 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at the 2% level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of a CHF. In this paper, an example will be provided to illustrate the beam dynamics in a CHF,more » emphasizing the chromatic optics. Basic optical modules and advanced analysis will be presented. Most importantly, we will show that 2% momentum aperture is achievable.« less

Recent advances in systems metabolic engineering tools and strategies.

PubMed

Chae, Tong Un; Choi, So Young; Kim, Je Woong; Ko, Yoo-Sung; Lee, Sang Yup

2017-10-01

Metabolic engineering has been playing increasingly important roles in developing microbial cell factories for the production of various chemicals and materials to achieve sustainable chemical industry. Nowadays, many tools and strategies are available for performing systems metabolic engineering that allows systems-level metabolic engineering in more sophisticated and diverse ways by adopting rapidly advancing methodologies and tools of systems biology, synthetic biology and evolutionary engineering. As an outcome, development of more efficient microbial cell factories has become possible. Here, we review recent advances in systems metabolic engineering tools and strategies together with accompanying application examples. In addition, we describe how these tools and strategies work together in simultaneous and synergistic ways to develop novel microbial cell factories. Copyright © 2017 Elsevier Ltd. All rights reserved.

Tracing Staphylococcus aureus in small and medium-sized food-processing factories on the basis of molecular sub-species typing.

PubMed

Koreňová, Janka; Rešková, Zuzana; Véghová, Adriana; Kuchta, Tomáš

2015-01-01

Contamination by Staphylococcus aureus of the production environment of three small or medium-sized food-processing factories in Slovakia was investigated on the basis of sub-species molecular identification by multiple locus variable number of tandem repeats analysis (MLVA). On the basis of MLVA profiling, bacterial isolates were assigned to 31 groups. Data from repeated samplings over a period of 3 years facilitated to draw spatial and temporal maps of the contamination routes for individual factories, as well as identification of potential persistent strains. Information obtained by MLVA typing allowed to identify sources and routes of contamination and, subsequently, will allow to optimize the technical and sanitation measures to ensure hygiene.

Front End for a neutrino factory or muon collider

DOE PAGES

Neuffer, David; Snopok, Pavel; Alexahin, Yuri

2017-11-30

A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ’s produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a Φ-δE rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an “HFOFO Snake” configuration that cools both μ + and μ - transversely andmore » longitudinally. Finally, the status of the design is presented and variations are discussed.« less

Engineering the smart factory

NASA Astrophysics Data System (ADS)

Harrison, Robert; Vera, Daniel; Ahmad, Bilal

2016-10-01

The fourth industrial revolution promises to create what has been called the smart factory. The vision is that within such modular structured smart factories, cyber-physical systems monitor physical processes, create a virtual copy of the physical world and make decentralised decisions. This paper provides a view of this initiative from an automation systems perspective. In this context it considers how future automation systems might be effectively configured and supported through their lifecycles and how integration, application modelling, visualisation and reuse of such systems might be best achieved. The paper briefly describes limitations in current engineering methods, and new emerging approaches including the cyber physical systems (CPS) engineering tools being developed by the automation systems group (ASG) at Warwick Manufacturing Group, University of Warwick, UK.

Combustion of liquid paint wastes in fluidized bed boiler as element of waste management system in the paint factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soko, W.A.; Biaecka, B.

1998-12-31

In this paper the solution to waste problems in the paint industry is presented by describing their combustion in a fluidized bed boiler as a part of the waste management system in the paint factory. Based on the Cleaner Production idea and concept of integration of design process with a future exploitation of equipment, some modifications of the waste management scheme in the factory are discussed to reduce the quantity of toxic wastes. To verify this concept combustion tests of paint production wastes and cocombustion of paint wastes with coal in an adopted industrial boiler were done. Results of thesemore » tests are presented in the paper.« less

Effects of dairy factory, milk casein content and titratable acidity on coagulation properties in Trentingrana dairy industry.

PubMed

Penasa, Mauro; Toffanin, Valentina; Cologna, Nicola; Cassandro, Martino; De Marchi, Massimo

2016-05-01

The objective of the present study was to investigate the effect of environmental factors, milk casein content and titratable acidity on milk coagulation properties (MCP) of samples routinely collected in the Trento province (northeast Italy) under field conditions. Rennet coagulation time (RCT, min), curd-firming time (k20, min) and curd firmness (a30, mm) were determined by Formagraph on 14 971 samples from 635 herds associated to 17 dairy factories. Besides MCP, fat, protein, and casein percentages, titratable acidity (TA), and somatic cell and bacterial counts were available. A standardised index of milk aptitude to coagulate (IAC) was derived using information of RCT and a30. An analysis of variance was conducted on MCP and IAC using a fixed effects linear model. Approximately 3% of milk samples did not form a curd within the testing time (30 min) and k20 was missing for 26% of milks. The percentage of samples without information on k20 largely differed among dairy factories (1·7-20·9%). Significant differences were estimated between the best and the worst dairy factory for RCT (-2 min), k20 (-1·2 min), a30 (+3·4 mm) and IAC (+2·6 points). Milk casein content and TA were important factors in explaining the variation of MCP and IAC, supporting the central role of these two traits on technological properties. The Trento province is heterogeneous in terms of dairy systems and this could explain the differences among dairy factories.

Are the Insomnia Severity Index and Pittsburgh Sleep Quality Index valid outcome measures for Cognitive Behavioral Therapy for Insomnia? Inquiry from the perspective of response shifts and longitudinal measurement invariance in their Chinese versions.

PubMed

Chen, Po-Yi; Jan, Ya-Wen; Yang, Chien-Ming

2017-07-01

The purpose of this study was to examine whether the Insomnia Severity Index (ISI) and Pittsburgh Sleep Quality Index (PSQI) are valid outcome measures for Cognitive Behavioral Therapy for Insomnia (CBT-I). Specifically, we tested whether the factorial parameters of the ISI and the PSQI could remain invariant against CBT-I, which is a prerequisite to using their change scores as an unbiased measure of the treatment outcome of CBT-I. A clinical data set including scores on the Chinese versions of the ISI and the PSQI obtained from 114 insomnia patients prior to and after a 6-week CBT-I program in Taiwan was analyzed. A series of measurement invariance (MI) tests were conducted to compare the factorial parameters of the ISI and the PSQI before and after the CBT-I treatment program. Most factorial parameters of the ISI remained invariant after CBT-I. However, the factorial model of the PSQI changed after CBT-I treatment. An extra loading with three residual correlations was added into the factorial model after treatment. The partial strong invariance of the ISI supports that it is a valid outcome measure for CBT-I. In contrast, various changes in the factor model of the PSQI indicate that it may not be an appropriate outcome measure for CBT-I. Some possible causes for the changes of the constructs of the PSQI following CBT-I are discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Dioxin/POPs legacy of pesticide production in Hamburg: part 1--securing of the production area.

PubMed

Weber, Roland; Varbelow, Hans Gerhard

2013-04-01

α-Hexachlorocyclohexane (HCH), β-HCH, and γ-HCH (lindane) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention. Therefore, the chemicals need to be globally addressed, including the disposal of historic wastes. At most sites, the approximately 85% of HCH waste isomers were dumped. At a former lindane factory in Hamburg and some other factories the HCH, waste was recycled producing residues with high polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) levels. The soil and ground water under the former pesticide factory was/is highly contaminated with HCH (260 tons), chlorobenzenes (550 tons), and PCDD/PCDF (6 kg toxic equivalents (TEQ)). This contamination did not result from disposal operations but from spillages and leakages during the 30 years of the factory's production history. A containment wall has been constructed around the production area to prevent the dispersal of the pollutants. The ground water is managed by a pump and treat system. Over the last 15 years, approximately 10-30 tons of this pollution reservoir has been pumped and incinerated. For the contaminated production buildings, specific assessment and demolition technologies have been applied. In addition to their HCH waste isomer deposition, former lindane/HCH productions need to be assessed for possible recycling practice of HCH and related PCDD/PCDF contamination of the production area and buildings. Since such recycling activities have taken place at several factories in different countries, the experience of assessment and management of the described production area and contaminated buildings could be valuable. Such assessment could be addressed within the frame of the Stockholm Convention.

Increased lead absorption caused by working next to a lead recycling factory.

PubMed

Chao, K Y; Wang, J D

1994-08-01

The objective of this study was to determine whether workers at a factory in Taiwan, adjacent to lead recycling plant, were affected by lead contamination. Workers at the lead recycling plant itself were found to suffer from lead poisoning; air and soil outside the plant were heavily contaminated by lead. Forty-one of the 45 workers in a forging factory next to the lead recycling plant were enrolled as the exposed group. A comparison group of 51 workers were selected from another forging factory about 20 km away. Each subject was interviewed about his lifestyle, work history, and residence, and blood was drawn for lead measurement by graphite furnace atomic absorption spectrometry. The results showed that two groups were compatible in age, sex, and smoking patterns. Blood lead of the exposed group was significantly higher than that of the comparison group (mean +/- SD: 20.4 +/- 9.4 micrograms/dl vs. 5.9 +/- 2.9 micrograms/dl). The difference was independent of sex and working zones. Blood lead levels were lower among exposed workers who had been employed less than 2 months compared with those employed longer. There was no difference among exposed workers in different outdoor working zones. Five months after improvement of pollution control and decrease in the production volume of the lead factory, 30 exposed workers were retested for blood lead. The blood lead of outdoor workers had an average decrease of 4.2 micrograms/dl while that of indoor workers showed no significant difference.(ABSTRACT TRUNCATED AT 250 WORDS)

Impact of an asbestos cement factory on mesothelioma incidence: global assessment of effects of occupational, familial, and environmental exposure.

PubMed

Mensi, Carolina; Riboldi, Luciano; De Matteis, Sara; Bertazzi, Pier Alberto; Consonni, Dario

2015-01-01

Few studies have examined the incidence of malignant mesothelioma (MM) associated with distinct sources of asbestos exposure (occupational, familial, or environmental). We assessed the impact of asbestos exposure-global and by source-on the incidence of MM in Broni, an Italian town in which an asbestos cement factory once operated (1932-1993). Based on data collected by the Lombardy Mesothelioma Registry, we calculated the number of observed and expected MM cases among workers, their cohabitants, and people living in the area in 2000-2011. We identified 147 MM cases (17.45 expected), 138 pleural and nine peritoneal, attributable to exposure to asbestos from the factory. Thirty-eight cases had past occupational exposure at the factory (2.33 expected), numbering 32 men (26 pleural, six peritoneal) and six women (four pleural, two peritoneal). In the families of the workers, there were 37 MM cases (4.23 expected), numbering five men (all pleural) and 32 women (31 pleural, one peritoneal). Among residents in Broni or in the adjacent/surrounding towns, there were 72 cases of pleural MM (10.89 expected), numbering 23 men and 49 women. The largest MM excess was found in the towns of Broni (48 observed, 3.68 expected) and Stradella (16 observed, 1.85 expected). This study documents the large impact of the asbestos cement factory, with about 130 excess MM cases in a 12-year period. The largest MM burden was among women, from non-occupational exposure. Almost half of the MM cases were attributable to environmental exposure. Copyright © 2014 Elsevier Ltd. All rights reserved.

Toward precision smoking cessation treatment I: Moderator results from a factorial experiment.

PubMed

Piper, Megan E; Schlam, Tanya R; Cook, Jessica W; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Collins, Linda M; Fiore, Michael C; Baker, Timothy B

2017-02-01

The development of tobacco use treatments that are effective for all smokers is critical to improving clinical and public health. The Multiphase Optimization Strategy (MOST) uses highly efficient factorial experiments to evaluate multiple intervention components for possible inclusion in an optimized tobacco use treatment. Factorial experiments permit analyses of the influence of patient characteristics on main and interaction effects of multiple, relatively discrete, intervention components. This study examined whether person-factor and smoking characteristics moderated the main or interactive effects of intervention components on 26-week self-reported abstinence rates. This fractional factorial experiment evaluated six smoking cessation intervention components among primary care patients (N=637): Prequit Nicotine Patch vs. None, Prequit Nicotine Gum vs. None, Preparation Counseling vs. None, Intensive Cessation In-Person Counseling vs. Minimal, Intensive Cessation Telephone Counseling vs. Minimal, and 16 vs. 8 Weeks of Combination Nicotine Replacement Therapy (NRT; nicotine patch+nicotine gum). Both psychiatric history and smoking heaviness moderated intervention component effects. In comparison with participants with no self-reported history of a psychiatric disorder, those with a positive history showed better response to 16- vs. 8-weeks of combination NRT, but a poorer response to counseling interventions. Also, in contrast to light smokers, heavier smokers showed a poorer response to counseling interventions. Heavy smokers and those with psychiatric histories demonstrated a differential response to intervention components. This research illustrates the use of factorial designs to examine the interactions between person characteristics and relatively discrete intervention components. Future research is needed to replicate these findings. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Prevalence and Factors Associated with the Utilization of Dental Care Services among Factory Workers in Nava Nakorn Industrial Estate, Pathumthani Province, Thailand.

PubMed

Jaidee, Jeeratip; Ratanasiri, Amornrat; Chatrchaiwiwatana, Supaporn; Soonthon, Surasak

2015-07-01

The present study aimed to find out the utilization prevalence of dental care services among factory workers over a period of one year and factors associated with utilization of dental care services. This was a cross-sectional analytic study. The study population was factory workers in Nava Nakorn Industrial Estate randomly sampled using Probability Proportion to Size Cluster Sampling Method. The tool was a questionnaire about utilization of dental care services. Among the sample group of 1,500 workers from 16 factories, almost 2/3 (63.9%) had never used any dental care services in the previous year while only 36.1% did. A multivariable logistic regression analysis showed that workplace, accommodation, tooth decay, toothache history, transportation, experience in using social security fund for dental care services, availability and accessibility of dental care services, brushing teeth regularly after meals, using dental care services regularly in a dental clinic, and agreement with the idea that a tooth extraction and medication by a dentist could reduce the risk of progression of disease, statistical significance (p-value < 0.05), were factors associated with the utilization of dental care services at R2 (The Nagelkerke R Square) 0.38. That the prevalence of the factory workers who did not use dental care services during the last one year was 63.9 percent. This study identified three groups of factors associated with the utilization of dental care services as: 1) Predisposing factors, 2) Enabling factors, and 3) Need factors.

Unmetabolized VOCs in urine as biomarkers of low level occupational exposure.

PubMed

Janasik, Beata; Jakubowski, Marek; Wesołowski, Wiktor; Kucharska, Małgorzata

2010-01-01

To compare the usefulness of determining unchanged forms of volatile organic compounds (VOCs), namely toluene (TOL), ethylbenzene (EB) and xylene (XYL), in urine with the effectiveness of the already used biomarkers of occupational exposure. Surveys were conducted in two workplaces (paint factory and footwear factory). In total, 65 subjects participated in the study. Air samples were collected using individual samplers during work shift. Urine and blood samples were collected at the end of work shift. Urine samples were analyzed for unchanged compounds and selected metabolites, while blood samples were tested for unchanged compounds. VOCs in blood and urine were determined by solid phase microextraction gas chromatography (SPME-GC-MS). In the paint factory, the geometric mean (GM) concentrations of VOCs in the air ranged as follows: 0.2-4.7 mg/m(3) for TOL, 0.4-40.9 mg/m(3) for EB and 0.1-122.6 mg/m(3) for XYL. In the footwear factory, the GM concentration of TOL in the air amounted to 105.4 mg/m(3). A significant correlation (p < 0.05) was observed between VOCs in blood, urine and air. The regression analyses performed for paint factory workers showed that TOL-U and TOL-B were better biomarkers of exposure (r = 0.72 and r = 0.81) than benzoic acid (r = 0.12) or o-cresol (r = 0.55). The findings of the study point out that the concentration of unchanged VOCs in urine can be a reliable biological indicator of low level occupational exposure to these compounds.

The microbiological quality of drinking water sold on the streets in Kumasi, Ghana.

PubMed

Obiri-Danso, K; Okore-Hanson, A; Jones, K

2003-01-01

The aim of this study was to assess the microbiological quality of Ghanaian bottled and plastic-bagged drinking water sold on the streets of Metropolitan Kumasi, Ghana. Eight bottled, 88 factory-filled plastic sachet and 40 hand-filled hand-tied polythene-bagged drinking waters were examined for the presence of heterotrophic bacteria total viable counts (TVCs), indicators of faecal contamination (total coliforms, faecal coliforms and enterococci) and for lead, manganese and iron. Heterotrophic bacteria were found in all three types of water with TVCs per millilitre ranging from 1 to 460 for bottled water, 2-6.33 x 10(5) for factory-bagged sachet water and 2.33 x 10(3)-7.33 x 10(12) for hand-filled hand-tied bagged water. None of the microbial indicators of faecal contamination were detected in bottled water, whereas 4.5% of the factory-bagged sachets contained total coliforms and 2.3% faecal coliforms, and 42.5% of the hand-filled hand-tied bags contained total coliforms, 22.5% faecal coliforms and 5% enterococci. Iron was found in all three types of drinking water but at concentrations well within the WHO recommendations. Lead and manganese were not detected. Ghanaian bottled water is of good microbiological quality but some factory-bagged sachet and hand-filled hand-tied polythene-bagged drinking water are of doubtful quality. Factory-bagged sachets and hand-filled hand-tied bags of drinking water sold in Ghana should be monitored for microbiological contamination, with the aim of raising standards in the industry and re-assuring the public.

Optimization of the Neutrino Factory, revisited

NASA Astrophysics Data System (ADS)

Agarwalla, Sanjib K.; Huber, Patrick; Tang, Jian; Winter, Walter

2011-01-01

We perform the baseline and energy optimization of the Neutrino Factory including the latest simulation results on the magnetized iron detector (MIND). We also consider the impact of τ decays, generated by νμ → ντ or ν e → ντ appearance, on the mass hierarchy, CP violation, and θ 13 discovery reaches, which we find to be negligible for the considered detector. For the baseline-energy optimization for small sin2 2 θ 13, we qualitatively recover the results with earlier simulations of the MIND detector. We find optimal baselines of about 2500km to 5000km for the CP violation measurement, where now values of E μ as low as about 12 GeV may be possible. However, for large sin2 2 θ 13, we demonstrate that the lower threshold and the backgrounds reconstructed at lower energies allow in fact for muon energies as low as 5 GeV at considerably shorter baselines, such as FNAL-Homestake. This implies that with the latest MIND analysis, low-and high-energy versions of the Neutrino Factory are just two different versions of the same experiment optimized for different parts of the parameter space. Apart from a green-field study of the updated detector performance, we discuss specific implementations for the two-baseline Neutrino Factory, where the considered detector sites are taken to be currently discussed underground laboratories. We find that reasonable setups can be found for the Neutrino Factory source in Asia, Europe, and North America, and that a triangular-shaped storage ring is possible in all cases based on geometrical arguments only.

Multivariate regression model for predicting lumber grade volumes of northern red oak sawlogs

Treesearch

Daniel A. Yaussy; Robert L. Brisbin

1983-01-01

A multivariate regression model was developed to predict green board-foot yields for the seven common factory lumber grades processed from northern red oak (Quercus rubra L.) factory grade logs. The model uses the standard log measurements of grade, scaling diameter, length, and percent defect. It was validated with an independent data set. The model...

26 CFR 1.199-4 - Costs allocable to domestic production gross receipts.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... Use of standard cost method. X, a calendar year taxpayer, manufactures item A in a factory located in the United States and item B in a factory located in Country Y. Item A is produced by X within the... engaged in the trade or business of farming that is not required to use the accrual method of accounting...

26 CFR 1.199-4 - Costs allocable to domestic production gross receipts.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... Use of standard cost method. X, a calendar year taxpayer, manufactures item A in a factory located in the United States and item B in a factory located in Country Y. Item A is produced by X within the... engaged in the trade or business of farming that is not required to use the accrual method of accounting...

26 CFR 1.199-4 - Costs allocable to domestic production gross receipts.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... Use of standard cost method. X, a calendar year taxpayer, manufactures item A in a factory located in the United States and item B in a factory located in Country Y. Item A is produced by X within the... engaged in the trade or business of farming that is not required to use the accrual method of accounting...

Universals and Specifics of Math Self-Concept, Math Self-Efficacy, and Math Anxiety across 41 PISA 2003 Participating Countries

ERIC Educational Resources Information Center

Lee, Jihyun

2009-01-01

The overarching goal of the present study is to investigate the factorial structure of three closely related constructs: math self-concept, math self-efficacy, and math anxiety. The factorial structure consisting of three factors, each representing math self-concept, math self-efficacy, and math anxiety, is supported in all 41 countries employed…

76 FR 70706 - Frontseating Service Valves From the People's Republic of China: Final Results of the 2008-2010...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

... more of the following components: A valve body, field connection tube, factory connection tube or valve charge port. The valve body is a rectangular block, or brass forging, machined to be hollow in the interior, with a generally square shaped seat (bottom of body). The field connection tube and factory...

Enhancing the Automatic Generation of Hints with Expert Seeding

ERIC Educational Resources Information Center

Stamper, John; Barnes, Tiffany; Croy, Marvin

2011-01-01

The Hint Factory is an implementation of our novel method to automatically generate hints using past student data for a logic tutor. One disadvantage of the Hint Factory is the time needed to gather enough data on new problems in order to provide hints. In this paper we describe the use of expert sample solutions to "seed" the hint generation…

Delivering the "Learning Factory"?: Evidence on HR Roles in Contemporary Manufacturing

ERIC Educational Resources Information Center

Barton, Harry; Delbridge, Rick

2006-01-01

Purpose: The purpose of this paper is to evidence the emergence of new forms of work organisation which if observed could be seen as consistent with the concept of the "learning factory". This is attempted through reporting the views of those workers engaged in team based operations and reflects upon the emerging role of first-line and…

26 CFR 1.691(a)-2 - Inclusion in gross income by recipients.

Code of Federal Regulations, 2013 CFR

2013-04-01

... received. Example 5. (1) A owned and operated an apple orchard. During his lifetime, A sold and delivered 1,000 bushels of apples to X, a canning factory, but did not receive payment before his death. A also entered into negotiations to sell 3,000 bushels of apples to Y, a canning factory, but did not complete...

26 CFR 1.691(a)-2 - Inclusion in gross income by recipients.

Code of Federal Regulations, 2012 CFR

2012-04-01

... received. Example 5. (1) A owned and operated an apple orchard. During his lifetime, A sold and delivered 1,000 bushels of apples to X, a canning factory, but did not receive payment before his death. A also entered into negotiations to sell 3,000 bushels of apples to Y, a canning factory, but did not complete...

26 CFR 1.691(a)-2 - Inclusion in gross income by recipients.

Code of Federal Regulations, 2014 CFR

2014-04-01

... received. Example 5. (1) A owned and operated an apple orchard. During his lifetime, A sold and delivered 1,000 bushels of apples to X, a canning factory, but did not receive payment before his death. A also entered into negotiations to sell 3,000 bushels of apples to Y, a canning factory, but did not complete...

26 CFR 1.691(a)-2 - Inclusion in gross income by recipients.

Code of Federal Regulations, 2011 CFR

2011-04-01

... received. Example 5. (1) A owned and operated an apple orchard. During his lifetime, A sold and delivered 1,000 bushels of apples to X, a canning factory, but did not receive payment before his death. A also entered into negotiations to sell 3,000 bushels of apples to Y, a canning factory, but did not complete...

Factorial Validity and Invariance of the Rosenberg Self-Esteem Scale among Portuguese Youngsters

ERIC Educational Resources Information Center

Vasconcelos-Raposo, Jose; Fernandes, Helder Miguel; Teixeira, Carla M.; Bertelli, Rosangela

2012-01-01

The purpose of the present study was to examine the reliability, factorial validity and measurement invariance (across gender, age and physical activity participation) of a Portuguese version of the Rosenberg Self-Esteem Scale (RSES). The sample consisted of 1,763 Portuguese youngsters (731 male and 1,032 female) with ages between 15 and 20 years.…

The Shirts on Our Backs: Teleological Perspectives on Factory Safety in Bangladesh

ERIC Educational Resources Information Center

Dhooge, Lucien J.

2016-01-01

This case study addresses the issue of factory safety in the garment industry through an examination of two recent catastrophic failures in Bangladesh. The case study was designed for students in Business Ethics in the MBA curriculum at the Scheller College of Business at the Georgia Institute of Technology. The case study has also been adapted…

Factorial Invariance of the Scale Beliefs about Children's Adjustment in Same-Sex Families in Spanish, Chilean, and Hispanic University Students

ERIC Educational Resources Information Center

Pascual-Soler, Marcos; Frias-Navarro, Dolores; Barrientos-Delgado, Jaime; Badenes-Ribera, Laura; Monterde-i-Bort, Hector; Cárdenas-Castro, Manuel; Berrios-Riquelme, José

2017-01-01

This study examines the factorial invariance of the Scale on Beliefs About Children's Adjustment in Same-Sex Families (SBCASSF) across countries in three samples: Chilean, Spanish, and Hispanic university students. The scale analyzes attitudes toward the consequences of the rearing and education of children by parents with a homosexual sexual…

Factorial Validity of the Chedoke-McMaster Attitudes towards Children with Handicaps Scale (CATCH)

ERIC Educational Resources Information Center

Bossaert, Goele; Petry, Katja

2013-01-01

The Chedoke-McMaster Attitudes towards Children with Handicaps Scale (CATCH) has been developed to measure the attitudes of children toward peers with disabilities. The present study aims to evaluate the factorial validity of the CATCH in a sample of 2396 students in 7th grade, including 179 students with disabilities and 2217 typically developing…

Factorial Validity and Invariance of the GHQ-12 among Clinical and Nonclinical Samples

ERIC Educational Resources Information Center

Fernandes, Helder Miguel; Vasconcelos-Raposo, Jose

2013-01-01

The purpose of this study was to examine the internal reliability, factorial validity, and measurement invariance of a Brazilian-Portuguese version of the General Health Questionnaire-12 (GHQ-12) across clinical and nonclinical groups. The clinical sample consisted of 228 chronic hemodialysis patients (41.7% female), with a mean age of 48.23 (SD =…

14. INTERIOR VIEW OF THIRD FLOOR OF FACTORY ADDITION, NORTHWEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. INTERIOR VIEW OF THIRD FLOOR OF FACTORY ADDITION, NORTHWEST CORNER OF BUILDING. AT THE CENTER IS THE BUFFING MACHINE, MANUFACTURED BY THE ACME CO. OF DETROIT, MICHIGAN. IT WAS HERE THAT ALUMINUM WARES WERE BROUGHT FOR FINAL GRINDING AND BUFFING. THE HOSES REMOVED DUST AND DEBRIS. - Illinois Pure Aluminum Company, 109 Holmes Street, Lemont, Cook County, IL

Factorial Validity of a Questionnaire to Evaluate University Students' Initial Perception of Learning Evaluation

ERIC Educational Resources Information Center

Doménech-Betoret, Fernando; Fortea-Bagán, Miguel Angel

2015-01-01

Introduction: Education research has clearly verified that a student's perception of the system to evaluate the subject matter will play a fundamental role in his/her implication (deep approach vs. surface approach) in the teaching/learning process of the subject matter. The present work aims to examine the factorial validity and reliability of a…

An Analysis of Fixed Wing Tactical Airlifter Characteristics Using an Intra-Theater Airlift Computer Model

DTIC Science & Technology

1991-09-01

an Experimental Design ...... 31 Selection of Variables .................... ... 34 Defining Measures of Effectiveness ....... 37 Specification of...Required Number of Replications 44 Modification of Scenario Files ......... ... 46 Analysis of the Main Effects of a Two Level Factorial Design ...48 Analysis of the Interaction Effects of a *Two Level Factorial Design .. ............. ... 49 Yate’s Algorithm ......... ................ 50

Factories, Monitorial Schools and Jeremy Bentham: The Origins of "The Management Syndrome" in Popular Education

ERIC Educational Resources Information Center

Miller, P. J.

1973-01-01

Suggests that the origins of the business management syndrome'' in popular education are to be found in two distinct yet not unrelated developments of the 19th century -- the success and consequent prestige of the early factory system, and the growing acceptance in the English speaking world of utilitarian ethical theory as it related to the…

Strategic Investment Plan Fiscal Year 1993.

DTIC Science & Technology

1993-09-01

Groundwater ........................ 283 Heavy Metals in Soils, Sludges, Sediments and Water .................... 321 Energetics in Soils and Groundwater...technologies and tools to achieve a design for reconfiguring existing PEP production facilities into agile factories which will reduce total life cycle wastes...facilities. When use of existing facilities is not practical, a special demonstration testbed may be built. The factory design will then be developed

Effect of Items Direction (Positive or Negative) on the Factorial Construction and Criterion Related Validity in Likert Scale

ERIC Educational Resources Information Center

Naji Qasem, Mamun Ali; Ahmad Gul, Showkeen Bilal

2014-01-01

The study was conducted to know the effect of items direction (positive or negative) on the factorial construction and criterion related validity in Likert scale. The descriptive survey research method was used for the study and the sample consisted of 510 undergraduate students selected by used random sampling technique. A scale developed by…

Internal Migration and Depressive Symptoms among Migrant Factory Workers in Shenzhen, China

ERIC Educational Resources Information Center

Mou, Jin; Cheng, Jinquan; Griffiths, Sian M.; Wong, Samuel Y. S.; Hillier, Sheila; Zhang, Dan

2011-01-01

There has been a dramatic increase in rural-urban migration in China over the last two decades but there are few studies on the mental health of Chinese internal migrants. This study assesses the prevalence of depressive symptoms (DS) and their associated factors among migrant factory workers in Shenzhen, China. A questionnaire survey was sent to…

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

Multivariate regression model for predicting yields of grade lumber from yellow birch sawlogs

Treesearch

Andrew F. Howard; Daniel A. Yaussy

1986-01-01

A multivariate regression model was developed to predict green board-foot yields for the common grades of factory lumber processed from yellow birch factory-grade logs. The model incorporates the standard log measurements of scaling diameter, length, proportion of scalable defects, and the assigned USDA Forest Service log grade. Differences in yields between band and...

45. WEST TO CIRCA 1900 SHEET METAL SHEAR, THE MACHINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

45. WEST TO CIRCA 1900 SHEET METAL SHEAR, THE MACHINE USED TO CUT SHEET METAL USED IN WINDMILLS AND WATER TANKS. IN THE BACKGROUND IS THE INTERIOR WEST WALL OF THE FACTORY, ITS SHELVES BEARING WATER PUMPS, PARTS FOR PUMPS AND WATER SUPPLY EQUIPMENT, AND NEW OLD STOCK MERCHANDISE. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

Examining the Validity of a Swedish Version of the Self-Presentation in Exercise Questionnaire

ERIC Educational Resources Information Center

Lindwall, Magnus

2005-01-01

This study examines the factorial validity, factorial invariance across gender, and construct validity of a Swedish version of the Self-Presentation in Exercise Questionnaire (SPEQ; Conroy, Motl, & Hall, 2000). The a priori two-factor 14-item, 11-item, and 9-item models fail to reach acceptable levels of fit in a calibration sample. A modified…

The Factor Structure and Age-Related Factorial Invariance of the Delis-Kaplan Executive Function System (D-KEFS)

ERIC Educational Resources Information Center

Latzman, Robert D.; Markon, Kristian E.

2010-01-01

There has been an increased interest in the structure of and relations among executive functions.The present study examined the factor structure as well as age-related factorial invariance of the Delis-Kaplan Executive Function System (D-KEFS), a widely used inventory aimed at assessing executive functions. Analyses were first conducted using data…

The Factorial Validity of The Maslach Burnout Inventory--General Survey in Representative Samples of Eight Different Occupational Groups

ERIC Educational Resources Information Center

Langballe, Ellen Melbye; Falkum, Erik; Innstrand, Siw Tone; Aasland, Olaf Gjerlow

2006-01-01

The Maslach Burnout Inventory--General Survey (MBI-GS) is designed to measure the three subdimensions (exhaustion, cynicism, and professional efficacy) of burnout in a wide range of occupations. This article examines the factorial validity of the MBI-GS across eight different occupational groups in Norway: lawyers, physicians, nurses, teachers,…

Attitudes and Lifestyle Changes Following Jog Your Mind: Results from a Multi-Factorial Community-Based Program Promoting Cognitive Vitality among Seniors

ERIC Educational Resources Information Center

Laforest, Sophie; Lorthios-Guilledroit, Agathe; Nour, Kareen; Parisien, Manon; Fournier, Michel; Ellemberg, Dave; Guay, Danielle; Desgagnés-Cyr, Charles-Émile; Bier, Nathalie

2017-01-01

This study examined the effects on attitudes and lifestyle behavior of "Jog your Mind," a multi-factorial community-based program promoting cognitive vitality among seniors with no known cognitive impairment. A quasi-experimental study was conducted. Twenty-three community organizations were assigned either to the experimental group…

Factorial Invariance and Latent Mean Differences for the Five Factor Wellness Inventory with Korean and American Counselors

ERIC Educational Resources Information Center

Jang, Yoo Jin; Lee, Jayoung; Puig, Ana; Lee, Sang Min

2012-01-01

This study aimed to examine the factorial equivalence of the Five Factor Wellness Inventory across U.S. and Korean professional counselors and counselors-in-training. Latent means analyses demonstrated that there were significant differences between U.S. and Korean counselors for the five domains of wellness. (Contains 4 tables and 1 figure.)

The Learning and Study Strategies Inventory-High School Version: Issues of Factorial Invariance Across Gender and Ethnicity

ERIC Educational Resources Information Center

Stevens, Tara; Tallent-Runnels, Mary K.

2004-01-01

The purpose of this study was to investigate the latent structure of the Learning and Study Strategies Inventory-High School (LASSI-HS) through confirmatory factor analysis and factorial invariance models. A simple modification of the three-factor structure was considered. Using a larger sample, cross-validation was completed and the equality of…

The Factorial Invariance of the CES-D during Adolescence: Are Symptom Profiles for Depression Stable across Gender and Time?

ERIC Educational Resources Information Center

Verhoeven, Marjolein; Sawyer, Michael G.; Spence, Susan H.

2013-01-01

This study examined the factorial invariance of the Center for Epidemiologic Studies of Depression Scale (CES-D) across gender and time during adolescence. The factor structure of the CES-D was compared at four annual measurement waves in a community sample of 2650 Australian adolescents. Confirmatory factor analyses showed that the factor…

Cultivating Innovative and Entrepreneurial Talent in the Higher Vocational Automotive Major with the "On-Board Educational Factory" Model

ERIC Educational Resources Information Center

Wu, Zhuang-Wen; Zhu, Liang-Rong

2017-01-01

In this paper, we investigate the steps necessary to initiate reform in professional education. First, we analyze the advantages and disadvantages of the unified theory and practice model of education currently adopted in mainland China. Next, we suggest a talent cultivation strategy that prioritizes students and views industrial (factory)…

7. INTERIOR VIEW OF BASEMENT OF CA. 1948 FACTORY ADDITION, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. INTERIOR VIEW OF BASEMENT OF CA. 1948 FACTORY ADDITION, LOOKING SOUTHEAST. AT CENTER IS A DEEP-BRAWN, HEAVY PRESS MANUFACTURED BY E. W. BLISS CO., BROOKLYN, NEW YORK. PRESS #3-1/2-C PATENTED BY E. W. BLISS CO., 1893. MANUFACTURER'S PLATE INDICATES PRESS DATES FROM 1922. - Illinois Pure Aluminum Company, 109 Holmes Street, Lemont, Cook County, IL

Respiratory Morbidity among Indian Tea Industry Workers.

PubMed

Moitra, S; Thapa, P; Das, P; Das, J; Debnath, S; Singh, Mahipal; Datta, A; Sen, S; Moitra, S

2016-07-01

Indian tea industry workers are exposed to various exposures at their workplace. To investigate the respiratory health of Indian tea industry workers. We administered a respiratory questionnaire to and measured lung function in workers of 34 tea gardens and 46 tea factories. We used correlation matrices to test the association between their respiratory symptoms and lung functions. The garden workers complained of shortness of breath 3 times higher than the factory workers. However, nasal allergy was more predominant among the factory workers compared to garden workers (69.6% vs 41.2%, p=0.02). The factory workers had higher total (median 107.3% vs 92.9%, p=0.05, as measured by R at 5 Hz) and peripheral airway resistance (143.8% vs 61.1%, p=0.005, as measured by R at 5-20 Hz) than the garden workers. Respiratory symptoms were inversely associated with airway obstruction as measured by the ratio between forced expiratory volume in 1 second (FEV1) and forced vital capacity (FVC) and positively correlated with increased overall airway reactance among the workers. Respiratory symptoms and increased allergen susceptibility of Indian tea industry workers due to occupational exposures warrant routine systematic surveillance of their workplace air quality and health monitoring.

Indoor radon levels in workplaces of Adapazarı, north-western Turkey

NASA Astrophysics Data System (ADS)

Kapdan, Enis; Altinsoy, Nesrin

2014-02-01

The main objective of this study is to assess the health hazards due to radon gas accumulation and to compare the concentrations in different kinds of workplaces, in the city of Adapazarı, one of the most important industrial cities of Turkey. For this purpose, radon activity concentration measurements were carried out in schools, factories, offices and outdoors using CR-39 solid state nuclear track detectors (SSNTD). Results show that the mean radon activity concentrations (RAC) in schools, offices and factories were found to be 66, 76 and 27 Bq/m3, respectively, with an outdoor concentration of 14 Bq/m3. The average concentrations were found to decrease as follows for different types of industries: automotive > electronic > metal > textile. Because the maximum measured radon concentrations are 151 Bq/m3 in the schools, 173 Bq/m3 in the offices and 52 Bq/m3 in the factories, the limits of ICRP are not exceeded in any of the buildings in the region. In addition, the estimated mean annual effective doses to the people in the workplace, students, office workers and factory workers have been calculated as 0.27, 0.63 and 0.20 mSv/y, respectively for the region.

Performing Contrast Analysis in Factorial Designs: From NHST to Confidence Intervals and Beyond

PubMed Central

Wiens, Stefan; Nilsson, Mats E.

2016-01-01

Because of the continuing debates about statistics, many researchers may feel confused about how to analyze and interpret data. Current guidelines in psychology advocate the use of effect sizes and confidence intervals (CIs). However, researchers may be unsure about how to extract effect sizes from factorial designs. Contrast analysis is helpful because it can be used to test specific questions of central interest in studies with factorial designs. It weighs several means and combines them into one or two sets that can be tested with t tests. The effect size produced by a contrast analysis is simply the difference between means. The CI of the effect size informs directly about direction, hypothesis exclusion, and the relevance of the effects of interest. However, any interpretation in terms of precision or likelihood requires the use of likelihood intervals or credible intervals (Bayesian). These various intervals and even a Bayesian t test can be obtained easily with free software. This tutorial reviews these methods to guide researchers in answering the following questions: When I analyze mean differences in factorial designs, where can I find the effects of central interest, and what can I learn about their effect sizes? PMID:29805179

A method to accelerate creation of plasma etch recipes using physics and Bayesian statistics

NASA Astrophysics Data System (ADS)

Chopra, Meghali J.; Verma, Rahul; Lane, Austin; Willson, C. G.; Bonnecaze, Roger T.

2017-03-01

Next generation semiconductor technologies like high density memory storage require precise 2D and 3D nanopatterns. Plasma etching processes are essential to achieving the nanoscale precision required for these structures. Current plasma process development methods rely primarily on iterative trial and error or factorial design of experiment (DOE) to define the plasma process space. Here we evaluate the efficacy of the software tool Recipe Optimization for Deposition and Etching (RODEo) against standard industry methods at determining the process parameters of a high density O2 plasma system with three case studies. In the first case study, we demonstrate that RODEo is able to predict etch rates more accurately than a regression model based on a full factorial design while using 40% fewer experiments. In the second case study, we demonstrate that RODEo performs significantly better than a full factorial DOE at identifying optimal process conditions to maximize anisotropy. In the third case study we experimentally show how RODEo maximizes etch rates while using half the experiments of a full factorial DOE method. With enhanced process predictions and more accurate maps of the process space, RODEo reduces the number of experiments required to develop and optimize plasma processes.

Multivariate study of parameters in the determination of pesticide residues in apple by headspace solid phase microextraction coupled to gas chromatography-mass spectrometry using experimental factorial design.

PubMed

Abdulra'uf, Lukman Bola; Tan, Guan Huat

2013-12-15

Solid-phase microextraction (SPME) is a solvent-less sample preparation method which combines sample preparation, isolation, concentration and enrichment into one step. In this study, multivariate strategy was used to determine the significance of the factors affecting the solid phase microextraction of pesticide residues (fenobucarb, diazinon, chlorothalonil and chlorpyrifos) using a randomised factorial design. The interactions and effects of temperature, time and salt addition on the efficiency of the extraction of the pesticide residues were evaluated using 2(3) factorial designs. The analytes were extracted with 100 μm PDMS fibres according to the factorial design matrix and desorbed into a gas chromatography-mass spectrometry detector. The developed method was applied for the analysis of apple samples and the limits of detection were between 0.01 and 0.2 μg kg(-)(1), which were lower than the MRLs for apples. The relative standard deviations (RSD) were between 0.1% and 13.37% with average recovery of 80-105%. The linearity ranges from 0.5-50 μg kg(-)(1) with correlation coefficient greater than 0.99. Copyright © 2013 Elsevier Ltd. All rights reserved.

Two cases of paraoccupational asthma due to toluene diisocyanate (TDI).

PubMed

De Zotti, R; Muran, A; Zambon, F

2000-12-01

Two cases of paraoccupational asthma caused by toluene diisocyanate (TDI) are reported. The first patient was a metal worker in a machine shop situated near a factory producing polyurethane foam. Symptoms at work were not explainable by any specific exposure to irritants or allergens in the work site. As the patient recalled previous occasional work in the adjacent polyurethane factory with accompanying worsening of respiratory symptoms, a specific inhalation (SIC) test was performed with TDI, which confirmed the diagnosis of TDI asthma. The second case was a woman working part time as a secretary in the offices of her son's factory for varnishing wooden chairs. TDI was present in the products used in the varnishing shed. The SIC test confirmed the diagnosis of TDI asthma, despite the fact that the patient's job did not present risk of exposure to the substance. In both patients, symptoms disappeared when further exposure was avoided. These two cases confirm that paraoccupational exposure to TDI must be considered when evaluating patients with asthma not mediated by immunoglobulin E. They also suggest the need for more prospective studies evaluating the health risk for the general population living near polyurethane factories or other firms that use TDI.

Conformal expansions and renormalons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rathsman, J.

2000-02-07

The coefficients in perturbative expansions in gauge theories are factorially increasing, predominantly due to renormalons. This type of factorial increase is not expected in conformal theories. In QCD conformal relations between observables can be defined in the presence of a perturbative infrared fixed-point. Using the Banks-Zaks expansion the authors study the effect of the large-order behavior of the perturbative series on the conformal coefficients. The authors find that in general these coefficients become factorially increasing. However, when the factorial behavior genuinely originates in a renormalon integral, as implied by a postulated skeleton expansion, it does not affect the conformal coefficients.more » As a consequence, the conformal coefficients will indeed be free of renormalon divergence, in accordance with previous observations concerning the smallness of these coefficients for specific observables. The authors further show that the correspondence of the BLM method with the skeleton expansion implies a unique scale-setting procedure. The BLM coefficients can be interpreted as the conformal coefficients in the series relating the fixed-point value of the observable with that of the skeleton effective charge. Through the skeleton expansion the relevance of renormalon-free conformal coefficients extends to real-world QCD.« less

Knowledge, attitudes and beliefs about HIV infection and AIDS among healthy factory workers and their wives, Kinshasa, Zaire.

PubMed

Irwin, K; Bertrand, J; Mibandumba, N; Mbuyi, K; Muremeri, C; Mukoka, M; Munkolenkole, K; Nzilambi, N; Bosenge, N; Ryder, R

1991-01-01

As a first step in designing an AIDS prevention program at a large factory in Kinshasa, Zaire, we collected information on attitudes towards human immunodeficiency virus (HIV) infection and acquired immunodeficiency syndrome (AIDS) from factory foremen and their wives. Trained moderators conducted twelve focus group discussions (from November through December 1987) that addressed knowledge, attitudes and beliefs about HIV infection and AIDS. In general, participants were familiar with HIV infection and AIDS and considered these conditions leading health problems in Kinshasa. Although participants had a fairly accurate understanding of the causes of HIV infection, modes of transmission and preventive measures, many myths and misconceptions existed. Many participants did not believe that condom use would consistently prevent infection through sexual intercourse. Participants strongly favored the counseling of seropositive persons but showed less consensus about whether the spouse of a seropositive person should be notified of the partner's test result. Participants predicted that couples in which one member is seropositive and the other is not would experience marital discord and friction with family, neighbors and co-workers. These findings were applied to the development of a counseling and educational program for seropositive factory employees and their spouses.

Pollution characterization of liquid waste of the factory complex Fertial (Arzew, Algeria).

PubMed

Redouane, Fares; Mourad, Lounis

2016-03-01

The industrial development in Algeria has made a worrying situation for all socioeconomic stakeholders. Indeed, this economic growth is marked in recent years by the establishment of factories and industrial plants that discharge liquid waste in marine shorelines. These releases could destabilize the environmental balance in the coming years, hence the need to support the processing of all sources of pollution. Remediation of such discharges requires several steps of identifying the various pollutants to their treatments. Therefore, the authors conducted this first work of characterization of industrial effluents generated by the mineral fertilizer factory complex Fertial (Arzew), and discussed the pollution load generated by this type of industry. This monitoring would establish a tool for reflection and decision support developed by a management system capable of ensuring effective and sustainable management of effluents from industrial activities of Fertial. The authors conducted this first work of characterization of industrial effluents generated by the mineral fertilizer factory complex Fertial (Arzew), and discussed the pollution load generated by this type of industry. This monitoring would establish a tool for reflection and decision support developed by a management system capable of ensuring effective and sustainable management of effluents from industrial activities of Fertial.

Endoplasmic Reticulum-Golgi Intermediate Compartment Membranes and Vimentin Filaments Participate in Vaccinia Virus Assembly

PubMed Central

Risco, Cristina; Rodríguez, Juan R.; López-Iglesias, Carmen; Carrascosa, José L.; Esteban, Mariano; Rodríguez, Dolores

2002-01-01

Vaccinia virus (VV) has a complex morphogenetic pathway whose first steps are poorly characterized. We have studied the early phase of VV assembly, when viral factories and spherical immature viruses (IVs) form in the cytoplasm of the infected cell. After freeze-substitution numerous cellular elements are detected around assembling viruses: membranes, ribosomes, microtubules, filaments, and unidentified structures. A double membrane is clearly resolved in the VV envelope for the first time, and freeze fracture reveals groups of tubules interacting laterally on the surface of the viroplasm foci. These data strongly support the hypothesis of a cellular tubulovesicular compartment, related to the endoplasmic reticulum-Golgi intermediate compartment (ERGIC), as the origin of the first VV envelope. Moreover, the cytoskeletal vimentin intermediate filaments are found around viral factories and inside the viroplasm foci, where vimentin and the VV core protein p39 colocalize in the areas where crescents protrude. Confocal microscopy showed that ERGIC elements and vimentin filaments concentrate in the viral factories. We propose that modified cellular ERGIC membranes and vimentin intermediate filaments act coordinately in the construction of viral factories and the first VV form through a unique mechanism of viral morphogenesis from cellular elements. PMID:11799179

The Operator Guide: An Ambient Persuasive Interface in the Factory

NASA Astrophysics Data System (ADS)

Meschtscherjakov, Alexander; Reitberger, Wolfgang; Pöhr, Florian; Tscheligi, Manfred

In this paper we introduce the context of a semiconductor factory as a promising area for the application of innovative interaction approaches. In order to increase efficiency ambient persuasive interfaces, which influence the operators' behaviour to perform in an optimized way, could constitute a potential strategy. We present insights gained from qualitative studies conducted in a specific semiconductor factory and provide a description of typical work processes and already deployed interfaces in this context. These findings informed the design of a prototype of an ambient persuasive interface within this realm - the "Operator Guide". Its overall aim is to improve work efficiency, while still maintaining a minimal error rate. We provide a detailed description of the Operator Guide along with an outlook of the next steps within a user-centered design approach.

MEASUREMENT EQUIVALENCE OF NEIGHBORHOOD QUALITY MEASURES FOR EUROPEAN AMERICAN AND MEXICAN AMERICAN FAMILIES

PubMed Central

Kim, Su Yeong; Nair, Rajni; Knight, George P.; Roosa, Mark W.; Updegraff, Kimberly A.

2009-01-01

The factorial and construct equivalence of subscales assessing parents’ and children’s perceptions of the quality of their neighborhood was examined in Mexican American and European American families. All subscales (dangerous people in the neighborhood, sense of safety in the neighborhood, quality of the physical environment) demonstrated adequate partial factorial invariance across English- and Spanish-speaking Mexican American and European American families. Reports by children about dangerous people in the neighborhood was the closest to achieving strict factorial invariance, and the only one of the four dimensions to achieve invariance in the validity analyses across Mexican American and European American families. The implications of using these self-report neighborhood quality measures in studies of multiple cultural or language groups are discussed. PMID:19183709

Team table: a framework and tool for continuous factory planning

NASA Astrophysics Data System (ADS)

Sihn, Wilfried; Bischoff, Juergen; von Briel, Ralf; Josten, Marcus

2000-10-01

Growing market turbulences and shorter product life cycles require a continuous adaptation of factory structures resulting in a continuous factory planning process. Therefore a new framework is developed which focuses on configuration and data management process integration. This enable an online system performance evaluation based on continuous availability of current data. The use of this framework is especially helpful and will guarantee high cost and time savings, when used in the early stages of the planning, called the concept or rough planning phase. The new framework is supported by a planning round table as a tool for team-based configuration processes integrating the knowledge of all persons involved in planning processes. A case study conducted at a German company shows the advantages which can be achieved by implementing the new framework and methods.

Intermittency in heavy ion collisions

NASA Astrophysics Data System (ADS)

Murray, Michael; HELIOS Collaboration

1991-04-01

This paper describes a study of multiplicity and transverse energy fluctuations using factorial moments for sulphur collisions with silver — bromide emulsion and platinium targets at 200 GeV/A. The data were taken with the HELIOS experiment at CERN. Bialas and Peschanski [1] predicted a power law dependence of the moments on the rapidity bin size if the fluctuations are invariant over a range of scales. This pattern is known as intermittency in the theory of turbulence, and indicates a fractal structure. Fluctuations were studied for a range of pseudorapidity scales using scaled factorial moments. Correlated fluctuations were studied using correlated scaled factorial moments. For peripheral collisions the data are weakly intermittent and consistent with a simple cascading mechanism, the a model. For central collisions no clear signal of intermittency was seen.

Intermittency in heavy ion collisions

NASA Astrophysics Data System (ADS)

1991-04-01

This paper describes a study of multiplicity and transverse energy fluctuations using factorial moments for sulphur collisions with silver - bromide emulsion and platinium targets at 200 GeV/A. The data were taken with the HELIOS experiment at CERN. Bialas and Peschanski [1] predicted a power law dependence of the moments on the rapidity bin size if the fluctuations are invariant over a range of scales. This pattern is known as intermittency in the theory of turbulence, and indicates a fractal structure. Fluctuations were studied for a range of pseudorapidity scales using scaled factorial moments. Correlated fluctuations were studied using correlated scaled factorial moments. For peripheral collisions the data are weakly intermittent and consistent with a simple cascading mechanism, the a model. For central collisions no clear signal of intermittency was seen.

Antimatter: What is and where did it go?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roodman, Aaron

2008-10-28

In this public lecture we will explore the mystery of antimatter: Where did it go? Why is the universe made up of only matter, with no observable antimatter? And why does the universe have any matter left in it anyway? The SLAC 'B'-Factory was built to answer these questions. Over the last decade, almost a billion 'B'-mesons were created and studied at the B-Factory to search for subtle differences between matter and antimatter, differences that lie at the heart of the antimatter mystery. We will explain the matter-antimatter discoveries made at the B-Factory, and their connection to this year's Nobelmore » prize in physics. It does not matter if you have no prior knowledge of Antimatter; just bring your curiosity.« less

Systems biology of yeast: enabling technology for development of cell factories for production of advanced biofuels.

PubMed

de Jong, Bouke; Siewers, Verena; Nielsen, Jens

2012-08-01

Transportation fuels will gradually shift from oil based fuels towards alternative fuel resources like biofuels. Current bioethanol and biodiesel can, however, not cover the increasing demand for biofuels and there is therefore a need for advanced biofuels with superior fuel properties. Novel cell factories will provide a production platform for advanced biofuels. However, deep cellular understanding is required for improvement of current biofuel cell factories. Fast screening and analysis (-omics) methods and metabolome-wide mathematical models are promising techniques. An integrated systems approach of these techniques drives diversity and quantity of several new biofuel compounds. This review will cover the recent technological developments that support improvement of the advanced biofuels 1-butanol, biodiesels and jetfuels. Copyright © 2011 Elsevier Ltd. All rights reserved.

Work-related respiratory disease in employees leaving an electronics factory.

PubMed

Perks, W H; Burge, P S; Rehahn, M; Green, M

1979-02-01

Examination of the records of employees leaving an electronics factory over three-and-a-half years showed that a significantly greater proportion left the shop floor (where soldering took place) because of ill health than left the stores and office areas. This difference was largely due to work-related respiratory disease in those whose job was soldering. Shop floor workers leaving for health reasons also had increased sickness certification due to respiratory illness compared to stores and office workers. These findings suggest that work-related respiratory illness is a significant cause of morbidity and loss of employment in solderers working at the factory and that this has been a longstanding problem with its onset before the first recorded cases of occupational asthma caused by solder flux containing colophony.

Pion Production from 5-15 GeV Beam for the Neutrino Factory Front-End Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prior, Gersende

2010-03-30

For the neutrino factory front-end study, the production of pions from a proton beam of 5-8 and 14 GeV kinetic energy on a Hg jet target has been simulated. The pion yields for two versions of the MARS15 code and two different field configurations have been compared. The particles have also been tracked from the target position down to the end of the cooling channel using the ICOOL code and the neutrino factory baseline lattice. The momentum-angle region of pions producing muons that survived until the end of the cooling channel has been compared with the region covered by HARPmore » data and the number of pions/muons as a function of the incoming beam energy is also reported.« less

Research on the Decision Method of Maintenance Materials Direct Supply

NASA Astrophysics Data System (ADS)

Zhu, Qian; Shi, Xiaopei; Liu, Shenyang; Luo, Guangxu; Zhu, Chen

2018-05-01

With the further development of civil military integration, more and more maintenance materials will be supplied by the factory directly. Aiming at the mode condition of maintenance materials factory direct supply, maintenance materials needs equipment support in the process of facing a number of direct supply manufacturers how to decision problems, using AHP, considering many factors optimization of direct supply manufacturers involved, and gives the weights of the evaluation indexes of the direct supply manufacturers to evaluate optimal. Finally, with 4 straights for the manufacturer as an example, considering the various evaluation indexes to carry out evaluation and drawing the correct evaluation of direct supply manufacturers, the best manufacturers direct supply is selected. An example shows that, AHP can provide scientific and theoretical basis to materials factory direct supply security.

Industrial Health—Meeting the Challenge*

PubMed Central

Meiklejohn, A.

1959-01-01

The modern industrial system had its origin in England just over 200 years ago. This period historically is referred to as the Industrial Revolution. It was marked by mechanical inventions in textile machinery, by advances in the manufacture of iron, and by the introduction of steam power. These, in turn, were the foundations of the factory system. In 1784 at a cotton mill at Radcliffe, near Manchester, an epidemic of malignant fever affected the operatives and spread to the surrounding population. The situation became serious and the local justices invited Dr. Thomas Percival, a leading local physician, to investigate the nature and circumstances of the outbreak. With his colleagues and leading citizens he formed the Manchester Board of Health. The Board, through authoritative reports, made recommendations for the control of such epidemics by the establishment of isolation hospitals. They also urged the need for the improvement of environmental conditions in mills and factories and for the diminution of working hours, especially for children and women. In pursuance of these objects the Government in 1802 passed the Health and Morals of Apprentices Act. This was the first Factory Act. Since then factory legislation has been greatly extended and is the basis of statutory supervision of factories and factory workers under the inspector of factories. The development of this supervision is traced with special reference to the work of the certifying surgeons, now the appointed factory doctors, and the medical inspectors. Concurrently, public health education and workmen's compensation were advanced through legislation. Since 1935 voluntary medical services have been developed in industry. These services have not been restricted to the observance of the minimum standards prescribed by statute and so have been able to pioneer advances directed to the promotion of safety, health, and welfare in factories and other places of employment. Radcliffe, Percival, and steam power are recognized as the growing points of the challenge to health by the Industrial Revolution. The means whereby the challenge was met are discussed. Towards the end of the nineteenth century scientists increasingly concentrated their studies on the elements. This culminated in the isolation of the atom. During the last 10 years atomic power has become a reality and the foundation of the second Industrial Revolution. While the potential hazards of ionizing radiations had long been known and proved at Hiroshima, the inherent dangers for the general population only became impressed on the public mind by a breakdown at the Windscale No. 1 plutonium pile on October 10, 1957. Radio-active iodine escaped, contaminating the atmosphere as far afield as western Europe. A committee under the chairmanship of Sir Alexander Fleck was appointed to investigate the cause of the accident and its consequences and to make recommendations. The report, which laid special emphasis on safety and health, was published early in 1958. So by analogy, Windscale, Fleck, and atomic power are identified as the growing points of the challenge of the Second Industrial Revolution. How this challenge is to be met by doctors is discussed. It is submitted that the urgent need is to formulate now a basic philosophy for future development of industrial medicine. Continuation of the old order will not suffice: ideas must again become revolutionary. The responsibility for leadership rests on the Industrial Health Advisory Committee established in 1955 under the chairmanship of the Minister of Labour and National Service. PMID:13618514

Factorial Invariance of an Integrated Measure of Classroom Sense of Community in Face-to-Face and Online Courses

ERIC Educational Resources Information Center

Cho, YoonJung; Hathcoat, John D.; Bridges, Stacey L.; Mathew, Susan; Bang, Hyeyoung

2014-01-01

The aim of the present study was to develop a more integrated measure of classroom sense of community (SOC) while testing factorial invariance of the measurement structure across face-to-face and online courses. We incorporated two existing SOC measures to capture both context-specific and context-general characteristics of SOC and developed an…

Can Parental Bonding Be Assessed in Children? Factor Structure and Factorial Invariance of the Parental Bonding Instrument (PBI) between Adults and Children

ERIC Educational Resources Information Center

Tsaousis, Ioannis; Mascha, Katerina; Giovazolias, Theodoros

2012-01-01

This study examined the factorial structure of the Parental Bonding Instrument (PBI) in the Greek population. Using confirmatory factor analysis different proposed models of the basic dimensions of PBI were evaluated. The results indicated that Kendler's three-factor (i.e. care, protectiveness and authoritarianism) solution was found to be more…

3 CFR 8639 - Proclamation 8639 of March 24, 2011. 100th Anniversary of the Triangle Shirtwaist Factory Fire

Code of Federal Regulations, 2012 CFR

2012-01-01

... buckets of water to douse the flames—giving the factory workers there little time to escape. When the..., and uphold collective bargaining as a tool to give workers a seat at the tables of power. Working Americans are the backbone of our communities and power the engine of our economy. As we mark the...

Facilitating Workplace Learning and Change: Lessons Learned from the Lectores in Pre-War Cigar Factories

ERIC Educational Resources Information Center

Germain, Marie-Line; Grenier, Robin S.

2015-01-01

Purpose: This study aims to describe the lectores (readers) who read the world news and works of literature to workers in pre-World War II cigar factories in Tampa, Florida, and in New York City. The paper addresses the need for more examination of some neglected aspects of workplace learning by presenting a more critical approach to workplace…

Improved control of sucrose losses and clarified juice turbidity with lime saccharate in hot lime clarification of sugarcane juice and other comparisons with milk of lime

USDA-ARS?s Scientific Manuscript database

A comparative investigation of adding milk of lime (MOL) versus lime saccharate (SACCH) in hot lime clarification of juice at a U.S. sugarcane factory was undertaken to quantify performance across the 2009 processing season after a preliminary factory study in 2008. SACCH was prepared by adding hyd...

The Grey Faces of Academic Workers: On the Non-Emancipatory Resistance of Polish Humanists to the Edu-Factory Reform of Academia

ERIC Educational Resources Information Center

Szwabowski, Oskar

2016-01-01

In this article I deal with the Polish discourse generated by academics facing a reform of higher education. My primary interest is to what extent their statement enables or disables emancipatory practice. I point out that the structure of academics' prevalent discourse in the face of education-factory reform makes liberation impossible.…

Effects of insulin-like growth factor-I, insulin, and leucine on protein turnover and pathways that regulate ubiquitin ligase expression in rainbow trout primary myocytes

USDA-ARS?s Scientific Manuscript database

The effects of insulin-like growth factor-I (IGF-I), insulin, and leucine on protein turnover and pathways that regulate proteolytic gene expression and protein polyubiquitination were investigated in primary cultures of four day old rainbow trout myocytes. Supplementing media with 100 nM IGF-I inc...

School Anxiety Inventory-Short Version: Factorial Invariance and Latent Mean Differences Across Gender and Age in Spanish Adolescents

ERIC Educational Resources Information Center

Ingles, Candido J.; Garcia-Fernandez, Jose M.; Marzo, Juan C.; Martinez-Monteagudo, Maria C.; Estevez, Estefania

2015-01-01

This study examined the factorial invariance and latent mean differences of the School Anxiety Inventory-Short Version across gender and age groups for 2,367 Spanish students, ranging in age from 12 to 18 years. Configural and measurement invariance were found across gender and age samples for all dimensions of the School Anxiety Inventory-Short…

Two Tracks of Thought: A Structural Model of the Test for Creative Thinking-Drawing Production (TCT-DP)

ERIC Educational Resources Information Center

Nogueira, Sara Ibérico; Almeida, Leonor S.; Lima, Tiago Souza

2017-01-01

The Test for Creative Thinking-Drawing Production (TCT-DP, Urban & Jellen, 1986) is one of the most used instruments for the assessment of creative potential. Few studies exist regarding its factorial structure, and all of them were limited to using an exploratory approach. The aim of this research was to assess the factorial structure of the…

The HERrespect intervention to address violence against female garment workers in Bangladesh: study protocol for a quasi-experimental trial.

PubMed

Al Mamun, Mahfuz; Parvin, Kausar; Yu, Marat; Wan, Jessica; Willan, Samantha; Gibbs, Andrew; Jewkes, Rachel; Naved, Ruchira Tabassum

2018-04-18

Women in Bangladesh experience high rates of Intimate Partner Violence (IPV). IPV is more prevalent against income earning women compared to their non-earning counterparts, and Workplace Violence (WPV) is also common. Such violence is a violation of women's rights, and also constrains them from contributing to their personal growth, household, community and the economy at large. There is limited evidence on what works to prevent IPV and WPV amongst garment workers. This paper describes an evaluation of HERrespect, an intervention which aims to reduce IPV and WPV against female garment workers in and around Dhaka, Bangladesh. The trial employs a quasi-experimental design, with four intervention and four control factories. In the intervention factories a randomly selected cohort of married female line workers, a cohort of male line workers, and all middle management staff received the intervention. The intervention strategies involved (1) gender transformative group-based training for workers and management staff; (2) joint session between workers (15 female and male) and middle-management staff; (3) factory-wide activities; (4) awareness raising among top management; (5) factory policy review and development and 6) a community based campaign. For the evaluation, a cohort of randomly selected female workers and a cohort of selected management staff have been established. All workers (n = 800) and management staff (n = 395) from these cohorts were interviewed at baseline using two different questionnaires, and will be interviewed in the endline, 24 months post-baseline. Intention to treat analysis will be used for assessing the impact of HERrespect, comparing the intervention and control factories. To our knowledge this is the first study that seeks to evaluate the impact on IPV and WPV, of group sessions with female workers, male workers, and management; factory-wide campaigns and a community intervention among female garment workers in Bangladesh. Apart from informing programmers and policy makers about intervention effectiveness in reducing IPV and WPV against female garment workers this study will also present evidence on an intervention tailored to the situation in the garment sector, which makes HERrespect scalable. ClinicalTrials.gov NCT03304015, retrospectively registered on October 06, 2017.

Image analysis with the computer vision system and the consumer test in evaluating the appearance of Lucanian dry sausage.

PubMed

Girolami, Antonio; Napolitano, Fabio; Faraone, Daniela; Di Bello, Gerardo; Braghieri, Ada

2014-01-01

The object of the investigation was the Lucanian dry sausage appearance, meant as color and visible fat ratio. The study was carried out on dry sausages produced in 10 different salami factories and seasoned for 18 days on average. We studied the effect of the raw material origin (5 producers used meat bought from the market and other 5 producers used meat from pigs bred in their farms) and of the salami factories or brands on meat color, fat color and visible fat ratio in dry sausages. The sausages slices were photographed and the images were analysed with the computer vision system to measure the changes in the colorimetric characteristics L*, a*, b*, hue and chroma and in the visible fat area ratio. The last parameter was assessed on the slice surface using image binarization. A consumer test was conducted to determine the relationship between the perception of visible fat on the sausage slice surface and acceptability and preference of this product. The consumers were asked to look carefully at the 6 sausages slices in a photo, minding the presence of fat, and to identify (a) the slices they considered unacceptable for consumption and (b) the slice they preferred. The results show that the color of the sausage lean part varies in relation to the raw material employed and to the producer or brand (P<0.001). Besides, the sausage meat color is not uniform in some salami factories (P<0.05-0.001). In all salami factories the sausages show a high uniformity in fat color. The visible fat ratio of the sausages slices is higher (P<0.001) in the product from salami factories without pig-breeding farm. The fat percentage is highly variable (P<0.001) among the sausages of each salami factory. On the whole, the product the consumers consider acceptable and is inclined to eat has a low fat percentage (P<0.001). Our consumers (about 70%) prefer slices which are leaner (P<0.001). Women, in particular, show a higher preference for the leanest (P<0.001). © 2013.

Sample size requirements for separating out the effects of combination treatments: randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis.

PubMed

Wolbers, Marcel; Heemskerk, Dorothee; Chau, Tran Thi Hong; Yen, Nguyen Thi Bich; Caws, Maxine; Farrar, Jeremy; Day, Jeremy

2011-02-02

In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 x 2 factorial design. We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 x 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Current Controlled Trials ISRCTN61649292.

Study of two cohorts of workers exposed to methyl methacrylate in acrylic sheet production

PubMed Central

Tomenson, J; Bonner, S; Edwards, J; Pemberton, M; Cummings, T; Paddle, G

2000-01-01

OBJECTIVES—To study mortality among 4324 workers at two United Kingdom factories, Darwen, Lancashire and Wilton, Cleveland, producing polymethyl methacrylate (PMMA) sheet. The Darwen factory is still active, but the Wilton one was closed in 1970. Also, to investigate patterns of mortality after exposure to methyl methacrylate; in particular, mortality from colon and rectal cancer.
METHODS—All male employees at the Darwen factory with a record of employment in 1949-88 and all men ever employed at the Wilton factory (1949-70) were investigated. The vital status of both cohorts was ascertained on 31 December 1995. The exposure of 1526 subjects at the Darwen plant who were engaged from 1949 onwards could be characterised. The mean duration of exposure was 7.6 years at 13.2 ppm (8 hour time weighted average), although exposures in some work groups were as high as 100 ppm. It was not possible to calculate the cumulative exposure of workers first employed at the Darwen plant before 1949 or workers at the Wilton factory.
RESULTS—In the Darwen cohort, 622 deaths were identified and a further 700 deaths in the Wilton cohort. Mortalities for the cohort were compared with national and local rates and expressed as standardised mortality ratios (SMRs). In the subcohort of Darwen workers with more than minimal exposure to MMA, reduced mortalities compared with national and local rates, were found for all causes (SMR 94), and colorectal cancer (SMR 92), but mortality from all cancers was slightly increased (SMR 104). No relations were found with cumulative exposure to MMA. In the subcohort of Wilton workers, mortality from all causes of death was significantly reduced (SMR 89), but mortality from all cancers (SMR 103) and colorectal cancer (SMR 124) were increased. The excess of colorectal cancer was confined to employees with less than 1 year of employment.
CONCLUSION—The study provided no clear evidence that employment at the factories or exposure to MMA had adversely affected the mortalities of workers.


Keywords: methyl methacrylate; mortality PMID:11077009

Insulin-like growth factor-I, physical activity, and control of cellular anabolism.

PubMed

Nindl, Bradley C

2010-01-01

The underlying mechanisms responsible for mediating the beneficial outcomes of exercise undoubtedly are many, but the insulin-like growth factor-I (IGF-I) system is emerging as an important and central hormonal axis that plays a significant role concerning cellular anabolism. This introductory article summarizes the intent and the content for papers presented as part of a 2008 American College of Sports Medicine national symposium entitled "Insulin-like Growth Factor-I, Physical Activity, and Control of Cellular Anabolism." The individual authors and their papers are as follows: Jan Frystyk authoring "The relationship between exercise and the growth hormone/insulin-like growth factor-I axis," Greg Adams authoring "IGF-I signaling in skeletal muscle and the potential for cytokine interactions," and Brad Nindl authoring "Insulin-like growth factor-I as a biomarker of health, fitness, and training status." These papers focus on 1) different assay methodologies for IGF-I within the paradigm of exercise studies, 2) research demonstrating that intracellular signaling components associated with several proinflammatory cytokines have the potential to interact with anabolic signaling processes in skeletal muscle, and 3) an overview of IGF-I as a biomarker related to exercise training, muscle and bone remodeling, body composition, cognition, and cancer. When summed in total, the contribution that these papers will make will undoubtedly involve bringing attention to the vast regulatory complexity of the IGF-I system and will hopefully convince the reader that the IGF-I system warrants further detailed scientific inquiry to resolve many unanswered questions and paradoxical experimental findings. The IGF-I system remains one of the most intriguing and captivating marvels of human physiology that seems central in mediating numerous adaptations from physical activity.

A factorial assessment of the sensitivity of the BATS land-surface parameterization scheme. [BATS (Biosphere-Atmosphere Transfer Scheme)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson-Sellers, A.

Land-surface schemes developed for incorporation into global climate models include parameterizations that are not yet fully validated and depend upon the specification of a large (20-50) number of ecological and soil parameters, the values of which are not yet well known. There are two methods of investigating the sensitivity of a land-surface scheme to prescribed values: simple one-at-a-time changes or factorial experiments. Factorial experiments offer information about interactions between parameters and are thus a more powerful tool. Here the results of a suite of factorial experiments are reported. These are designed (i) to illustrate the usefulness of this methodology andmore » (ii) to identify factors important to the performance of complex land-surface schemes. The Biosphere-Atmosphere Transfer Scheme (BATS) is used and its sensitivity is considered (a) to prescribed ecological and soil parameters and (b) to atmospheric forcing used in the off-line tests undertaken. Results indicate that the most important atmospheric forcings are mean monthly temperature and the interaction between mean monthly temperature and total monthly precipitation, although fractional cloudiness and other parameters are also important. The most important ecological parameters are vegetation roughness length, soil porosity, and a factor describing the sensitivity of the stomatal resistance of vegetation to the amount of photosynthetically active solar radiation and, to a lesser extent, soil and vegetation albedos. Two-factor interactions including vegetation roughness length are more important than many of the 23 specified single factors. The results of factorial sensitivity experiments such as these could form the basis for intercomparison of land-surface parameterization schemes and for field experiments and satellite-based observation programs aimed at improving evaluation of important parameters.« less

Minifactory: a precision assembly system adaptable to the product life cycle

NASA Astrophysics Data System (ADS)

Muir, Patrick F.; Rizzi, Alfred A.; Gowdy, Jay W.

1997-12-01

Automated product assembly systems are traditionally designed with the intent that they will be operated with few significant changes for as long as the product is being manufactured. This approach to factory design and programming has may undesirable qualities which have motivated the development of more 'flexible' systems. In an effort to improve agility, different types of flexibility have been integrated into factory designs. Specifically, automated assembly systems have been endowed with the ability to assemble differing products by means of computer-controlled robots, and to accommodate variations in parts locations and dimensions by means of sensing. The product life cycle (PLC) is a standard four-stage model of the performance of a product from the time that it is first introduced in the marketplace until the time that it is discontinued. Manufacturers can improve their return on investment by adapting the production process to the PLC. We are developing two concepts to enable manufacturers to more readily achieve this goal: the agile assembly architecture (AAA), an abstract framework for distributed modular automation; and minifactory, our physical instantation of this architecture for the assembly of precision electro-mechanical devices. By examining the requirements which each PLC stage places upon the production system, we identify characteristics of factory design and programming which are appropriate for that stage. As the product transitions from one stage to the next, the factory design and programing should also transition from one embodiment to the next in order to achieve the best return on investment. Modularity of the factory components, highly flexible product transport mechanisms, and a high level of distributed intelligence are key characteristics of minifactory that enable this adaptation.

Gender bias in nineteenth-century England: Evidence from factory children.

PubMed

Horrell, Sara; Oxley, Deborah

2016-09-01

Gender bias against girls in nineteenth-century England has received much interest but establishing its existence has proved difficult. We utilise data on heights of 16,402 children working in northern textile factories in 1837 to examine whether gender bias was evident. Current interpretations argue against any difference. Here our comparisons with modern height standards reveal greater deprivation for girls than for boys. Discrimination is measured in girls' height-for-age score (HAZ) falling eight standard errors below boys' at ages 11, 11.5 and 12 years of age, capturing the very poor performance of factory girls. But this result cannot be taken at face value. We query whether modern standards require adjustment to account for the later timing of puberty in historical populations and develop an alternative. We also test the validity of the age data, considering whether parents were more prone to lie about the ages of their daughters, and question whether the supply of girls was fundamentally different from that of boys. We conclude that neither proposition is justified. Disadvantage to girls remains, although its absence amongst younger children precludes an indictment of culturally founded gender bias. The height data must remain mute on the source of this discrimination but we utilise additional information to examine some hypotheses: occupational sorting, differential susceptibility to disease, poorer nutrition for girls, disproportionate stunting from the effects of nutritional deprivation, and type and amount of work undertaken. Of these we suggest that girls had to do arduous physical labour in the home alongside their factory work. The only (unsubstantiated) alternative is that girls were more likely than boys to be put into factory work below the legal age limit. Both represent forms of gender bias. Copyright © 2016 Elsevier B.V. All rights reserved.

Unilateral pseudogynecomastia: an occupational hazard in manual metal-pressing factories?

PubMed

Spyropoulou, Georgia-Alexandra; Karamatsoukis, Stavros; Foroglou, Pericles

2011-04-01

Five cases of unilateral occupation-related pseudogynecomastia are presented. All the patients in these cases worked in the same metal-pressing factory. One patient with grade 4 unilateral gynecomastia in the right breast presented to the authors' outpatient department asking persistently for surgery. He also reported that all his male colleagues working in the same business (a total of 5) had different degrees of unilateral gynecomastia. Their line of work involved holding a long round rod under the axilla and then pressing the distal end of it firmly against a spinning metal plate. The patient underwent a superior pedicle breast reduction, with 1,800 ml of tissue removed from his right breast. Unfortunately, the patient experienced partial nipple loss. However, he was satisfied with the final result, and good symmetry was achieved. All five patients who worked in the same metal-pressing factory presented with unilateral gynecomastia and were examined in our department. Their average age was 51.4 years. All the patients had normal hormonal and biochemical status, and the results of screening for toxins and heavy metal exposure were negative. All the patients were heavy smokers. At examination, none of the patients had nipple discharge or retraction, skin changes, galactorrhea, or lymphadenopathy. Examination showed one patient with grade 4, three patients had grade 2, and one patient with grade 1 unilateral gynecomastia. The authors believe that gynecomastia may be considered an occupational risk in analogous metal-pressing factories because all the workers in this factory presented with some degree of unilateral gynecomastia. However, they emphasize that this may simply be an observational phenomenon without a true cause and effect relationship.

Optimal Site Characterization and Selection Criteria for Oyster Restoration using Multicolinear Factorial Water Quality Approach

NASA Astrophysics Data System (ADS)

Yoon, J.

2015-12-01

Elevated levels of nutrient loadings have enriched the Chesapeake Bay estuaries and coastal waters via point and nonpoint sources and the atmosphere. Restoring oyster beds is considered a Best Management Practice (BMP) to improve the water quality as well as provide physical aquatic habitat and a healthier estuarine system. Efforts include declaring sanctuaries for brood-stocks, supplementing hard substrate on the bottom and aiding natural populations with the addition of hatchery-reared and disease-resistant stocks. An economic assessment suggests that restoring the ecological functions will improve water quality, stabilize shorelines, and establish a habitat for breeding grounds that outweighs the value of harvestable oyster production. Parametric factorial models were developed to investigate multicolinearities among in situ water quality and oyster restoration activities to evaluate posterior success rates upon multiple substrates, and physical, chemical, hydrological and biological site characteristics to systematically identify significant factors. Findings were then further utilized to identify the optimal sites for successful oyster restoration augmentable with Total Maximum Daily Loads (TMDLs) and BMPs. Factorial models evaluate the relationship among the dependent variable, oyster biomass, and treatments of temperature, salinity, total suspended solids, E. coli/Enterococci counts, depth, dissolved oxygen, chlorophyll a, nitrogen and phosphorus, and blocks consist of alternative substrates (oyster shells versus riprap, granite, cement, cinder blocks, limestone marl or combinations). Factorial model results were then compared to identify which combination of variables produces the highest posterior biomass of oysters. Developed Factorial model can facilitate maximizing the likelihood of successful oyster reef restoration in an effort to establish a healthier ecosystem and to improve overall estuarine water quality in the Chesapeake Bay estuaries.

Development of biosensors and their application in metabolic engineering.

PubMed

Zhang, Jie; Jensen, Michael K; Keasling, Jay D

2015-10-01

In a sustainable bioeconomy, many commodities and high value chemicals, including pharmaceuticals, will be manufactured using microbial cell factories from renewable feedstocks. These cell factories can be efficiently generated by constructing libraries of diversified genomes followed by screening for the desired phenotypes. However, methods available for microbial genome diversification far exceed our ability to screen and select for those variants with optimal performance. Genetically encoded biosensors have shown the potential to address this gap, given their ability to respond to small molecule binding and ease of implementation with high-throughput analysis. Here we describe recent progress in biosensor development and their applications in a metabolic engineering context. We also highlight examples of how biosensors can be integrated with synthetic circuits to exert feedback regulation on the metabolism for improved performance of cell factories. Copyright © 2015 Elsevier Ltd. All rights reserved.

Ergonomics improvements of the visual inspection process in a printed circuit assembly factory.

PubMed

Yeow, Paul H P; Sen, Rabindra Nath

2004-01-01

An ergonomics improvement study was conducted on the visual inspection process of a printed circuit assembly (PCA) factory. The process was studied through subjective assessment and direct observation. Three problems were identified: operators' eye problems, insufficient time for inspection and ineffective visual inspection. These problems caused a huge yearly rejection cost of US 298,240 dollars, poor quality, customer dissatisfaction and poor occupational health and safety. Ergonomics interventions were made to rectify the problems: reduced usage of a magnifying glass, the use of less glaring inspection templates, inspection of only electrically non-tested components and introduction of a visual inspection sequence. The interventions produced savings in rejection cost, reduced operators' eye strain, headaches and watery eyes, lowered the defect percentage at customers' sites and increased the factory's productivity and customer satisfaction.

Ubiquitous Robotic Technology for Smart Manufacturing System.

PubMed

Wang, Wenshan; Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

2016-01-01

As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods.

Ubiquitous Robotic Technology for Smart Manufacturing System

PubMed Central

Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

2016-01-01

As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods. PMID:27446206

Mathematical models of cell factories: moving towards the core of industrial biotechnology.

PubMed

Cvijovic, Marija; Bordel, Sergio; Nielsen, Jens

2011-09-01

Industrial biotechnology involves the utilization of cell factories for the production of fuels and chemicals. Traditionally, the development of highly productive microbial strains has relied on random mutagenesis and screening. The development of predictive mathematical models provides a new paradigm for the rational design of cell factories. Instead of selecting among a set of strains resulting from random mutagenesis, mathematical models allow the researchers to predict in silico the outcomes of different genetic manipulations and engineer new strains by performing gene deletions or additions leading to a higher productivity of the desired chemicals. In this review we aim to summarize the main modelling approaches of biological processes and illustrate the particular applications that they have found in the field of industrial microbiology. © 2010 The Authors. Journal compilation © 2010 Society for Applied Microbiology and Blackwell Publishing Ltd.

Molecular pathways: transcription factories and chromosomal translocations.

PubMed

Osborne, Cameron S

2014-01-15

The mammalian nucleus is a highly complex structure that carries out a diverse range of functions such as DNA replication, cell division, RNA processing, and nuclear export/import. Many of these activities occur at discrete subcompartments that intersect with specific regions of the genome. Over the past few decades, evidence has accumulated to suggest that RNA transcription also occurs in specialized sites, called transcription factories, that may influence how the genome is organized. There may be certain efficiency benefits to cluster transcriptional activity in this way. However, the clustering of genes at transcription factories may have consequences for genome stability, and increase the susceptibility to recurrent chromosomal translocations that lead to cancer. The relationships between genome organization, transcription, and chromosomal translocation formation will have important implications in understanding the causes of therapy-related cancers. ©2013 AACR.

Optimization of antibacterial activity by Gold-Thread (Coptidis Rhizoma Franch) against Streptococcus mutans using evolutionary operation-factorial design technique.

PubMed

Choi, Ung-Kyu; Kim, Mi-Hyang; Lee, Nan-Hee

2007-11-01

This study was conducted to find the optimum extraction condition of Gold-Thread for antibacterial activity against Streptococcus mutans using The evolutionary operation-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature (R2 = -0.79) and in a longer extraction time (R2 = -0.71). Antibacterial activity was not affected by differentiation of the ethanol concentration in the extraction solvent (R2 = -0.12). The maximum antibacterial activity of clove against S. mutans determined by the EVOP-factorial technique was obtained at 80 degrees C extraction temperature, 26 h extraction time, and 50% ethanol concentration. The population of S. mutans decreased from 6.110 logCFU/ml in the initial set to 4.125 logCFU/ml in the third set.

Levels of airborne dust in furniture making factories in the High Wycombe area

PubMed Central

Hounam, R. F.; Williams, J.

1974-01-01

Hounam, R. F. and Williams, J. (1974).British Journal of Industrial Medicine,31, 1-9. Levels of airborne dust in furniture making factories in the High Wycombe area. A dust survey was carried out in five furniture making factories in, or in the vicinity of, High Wycombe. The results, which are among the first to be reported for the United Kingdom, have provided information on the concentrations and size distributions of airborne dust to which wood machinists are currently exposed. Although measured concentrations covered a wide range, the average concentration was similar to the threshold limit value of 5 mg m-3 provisionally recommended by the American Conference of Governmental Industrial Hygienists. A high proportion by mass of the airborne dust was of a size which will be deposited in the nasal passages on inhalation. Images PMID:4821408