Which Factors Determine Metal Accumulation in Agricultural Soils in the Severely Human-Coupled Ecosystem?

PubMed Central

Xu, Li; Cao, Shanshan; Wang, Jihua; Lu, Anxiang

2016-01-01

Agricultural soil is typically an important component of urban ecosystems, contributing directly or indirectly to the general quality of human life. To understand which factors influence metal accumulation in agricultural soils in urban ecosystems is becoming increasingly important. Land use, soil type and urbanization indicators all account for considerable differences in metal accumulation in agricultural soils, and the interactions between these factors on metal concentrations were also examined. Results showed that Zn, Cu, and Cd concentrations varied significantly among different land use types. Concentrations of all metals, except for Cd, were higher in calcareous cinnamon soil than in fluvo-aquic soil. Expansion distance and road density were adopted as urbanization indicators, and distance from the urban center was significantly negatively correlated with concentrations of Hg, and negatively correlated with concentrations of Zn, and road density was positively correlated with Cd concentrations. Multivariate analysis of variance indicated that Hg concentration was significantly influenced by the four-way interaction among all factors. The results in this study provide basic data to support the management of agricultural soils and to help policy makers to plan ahead in Beijing. PMID:27196922

Which Factors Determine Metal Accumulation in Agricultural Soils in the Severely Human-Coupled Ecosystem?

PubMed

Xu, Li; Cao, Shanshan; Wang, Jihua; Lu, Anxiang

2016-05-17

Agricultural soil is typically an important component of urban ecosystems, contributing directly or indirectly to the general quality of human life. To understand which factors influence metal accumulation in agricultural soils in urban ecosystems is becoming increasingly important. Land use, soil type and urbanization indicators all account for considerable differences in metal accumulation in agricultural soils, and the interactions between these factors on metal concentrations were also examined. Results showed that Zn, Cu, and Cd concentrations varied significantly among different land use types. Concentrations of all metals, except for Cd, were higher in calcareous cinnamon soil than in fluvo-aquic soil. Expansion distance and road density were adopted as urbanization indicators, and distance from the urban center was significantly negatively correlated with concentrations of Hg, and negatively correlated with concentrations of Zn, and road density was positively correlated with Cd concentrations. Multivariate analysis of variance indicated that Hg concentration was significantly influenced by the four-way interaction among all factors. The results in this study provide basic data to support the management of agricultural soils and to help policy makers to plan ahead in Beijing.

Metal speciation in salt marsh sediments: Influence of halophyte vegetation in salt marshes with different morphology

NASA Astrophysics Data System (ADS)

Pedro, Sílvia; Duarte, Bernardo; Raposo de Almeida, Pedro; Caçador, Isabel

2015-12-01

Salt marshes provide environmental conditions that are known to affect metal speciation in sediments. The elevational gradient along the marsh and consequent differential flooding are some of the major factors influencing halophytic species distribution and coverage due to their differential tolerance to salinity and submersion. Different species, in turn, also have distinct influences on the sediment's metal speciation, and its metal accumulation abilities. The present work aimed to evaluate how different halophyte species in two different salt marshes could influence metal partitioning in the sediment at root depth and how that could differ from bare sediments. Metal speciation in sediments around the roots (rhizosediments) of Halimione portulacoides, Sarcocornia fruticosa and Spartina maritima was determined by sequentially extracting operationally defined fractions with solutions of increasing strength and acidity. Rosário salt marsh generally showed higher concentrations of all metals in the rhizosediments. Metal partitioning was primarily related to the type of metal, with the elements' chemistry overriding the environment's influence on fractionation schemes. The most mobile elements were Cd and Zn, with greater availability being found in non-vegetated sediments. Immobilization in rhizosediments was predominantly influenced by the presence of Fe and Mn oxides, as well as organic complexes. In the more mature of both salt marshes, the differences between vegetated and non-vegetated sediments were more evident regarding S. fruticosa, while in the younger system all halophytes presented significantly different metal partitioning when compared to that of mudflats.

The influence of salinity on metal uptake and effects in the midge Chironomus maddeni.

PubMed

Bidwell, Joseph R; Gorrie, John R

2006-01-01

The influence of different porewater salinities (up to 12 g/L) on the toxicity and bioaccumulation of copper, zinc and lead from metal-spiked sediments was assessed using the midge, Chironomus maddeni. Survival of the larvae was significantly reduced at a porewater salinity of 12 g/L, but no effects were observed at 4 or 8 g/L. Both growth and survival of C. maddeni were reduced after exposure to salt/metal spiked sediments as compared to those exposed to sediments spiked with metals or salt alone. Increased salinity resulted in increased bioaccumulation of copper and zinc, but decreased bioaccumulation of lead. The observed patterns of bioaccumulation were not entirely explained by the modelled free ion activities of the metals, indicating that factors such as osmotic stress, consumption of metal-contaminated sediments or metal interactions may have been important as well. These results highlight the need to consider the influence of existing or potential salinization when undertaking hazard assessments of freshwater systems impacted by contaminants such as trace metals.

Effects of natural factors on the spatial distribution of heavy metals in soils surrounding mining regions.

PubMed

Ding, Qian; Cheng, Gong; Wang, Yong; Zhuang, Dafang

2017-02-01

Various studies have shown that soils surrounding mining areas are seriously polluted with heavy metals. Determining the effects of natural factors on spatial distribution of heavy metals is important for determining the distribution characteristics of heavy metals in soils. In this study, an 8km buffer zone surrounding a typical non-ferrous metal mine in Suxian District of Hunan Province, China, was selected as the study area, and statistical, spatial autocorrelation and spatial interpolation analyses were used to obtain descriptive statistics and spatial autocorrelation characteristics of As, Pb, Cu, and Zn in soil. Additionally, the distributions of soil heavy metals under the influences of natural factors, including terrain (elevation and slope), wind direction and distance from a river, were determined. Layout of sampling sites, spatial changes of heavy metal contents at high elevations and concentration differences between upwind and downwind directions were then evaluated. The following results were obtained: (1) At low elevations, heavy metal concentrations decreased slightly, then increased considerably with increasing elevation. At high elevations, heavy metal concentrations first decreased, then increased, then decreased with increasing elevation. As the slope increased, heavy metal contents increased then decreased. (2) Heavy metal contents changed consistently in the upwind and downwind directions. Heavy metal contents were highest in 1km buffer zone and decreased with increasing distance from the mining area. The largest decrease in heavy metal concentrations was in 2km buffer zone. Perennial wind promotes the transport of heavy metals in downwind direction. (3) The spatial extent of the influence of the river on Pb, Zn and Cu in the soil was 800m. (4) The influence of the terrain on the heavy metal concentrations was greater than that of the wind. These results provide a scientific basis for preventing and mitigating heavy metal soil pollution in

A hierarchy of computationally derived surgical and patient influences on metal on metal press-fit acetabular cup failure.

PubMed

Clarke, S G; Phillips, A T M; Bull, A M J; Cobb, J P

2012-06-01

The impact of anatomical variation and surgical error on excessive wear and loosening of the acetabular component of large diameter metal-on-metal hip arthroplasties was measured using a multi-factorial analysis through 112 different simulations. Each surgical scenario was subject to eight different daily loading activities using finite element analysis. Excessive wear appears to be predominantly dependent on cup orientation, with inclination error having a higher influence than version error, according to the study findings. Acetabular cup loosening, as inferred from initial implant stability, appears to depend predominantly on factors concerning the area of cup-bone contact, specifically the level of cup seating achieved and the individual patient's anatomy. The extent of press fit obtained at time of surgery did not appear to influence either mechanism of failure in this study. Copyright © 2012 Elsevier Ltd. All rights reserved.

Causal inference between bioavailability of heavy metals and environmental factors in a large-scale region.

PubMed

Liu, Yuqiong; Du, Qingyun; Wang, Qi; Yu, Huanyun; Liu, Jianfeng; Tian, Yu; Chang, Chunying; Lei, Jing

2017-07-01

The causation between bioavailability of heavy metals and environmental factors are generally obtained from field experiments at local scales at present, and lack sufficient evidence from large scales. However, inferring causation between bioavailability of heavy metals and environmental factors across large-scale regions is challenging. Because the conventional correlation-based approaches used for causation assessments across large-scale regions, at the expense of actual causation, can result in spurious insights. In this study, a general approach framework, Intervention calculus when the directed acyclic graph (DAG) is absent (IDA) combined with the backdoor criterion (BC), was introduced to identify causation between the bioavailability of heavy metals and the potential environmental factors across large-scale regions. We take the Pearl River Delta (PRD) in China as a case study. The causal structures and effects were identified based on the concentrations of heavy metals (Zn, As, Cu, Hg, Pb, Cr, Ni and Cd) in soil (0-20 cm depth) and vegetable (lettuce) and 40 environmental factors (soil properties, extractable heavy metals and weathering indices) in 94 samples across the PRD. Results show that the bioavailability of heavy metals (Cd, Zn, Cr, Ni and As) was causally influenced by soil properties and soil weathering factors, whereas no causal factor impacted the bioavailability of Cu, Hg and Pb. No latent factor was found between the bioavailability of heavy metals and environmental factors. The causation between the bioavailability of heavy metals and environmental factors at field experiments is consistent with that on a large scale. The IDA combined with the BC provides a powerful tool to identify causation between the bioavailability of heavy metals and environmental factors across large-scale regions. Causal inference in a large system with the dynamic changes has great implications for system-based risk management. Copyright © 2017 Elsevier Ltd. All

What influences heavy metals accumulation in arctic lichen Cetrariella delisei in Svalbard?

NASA Astrophysics Data System (ADS)

Węgrzyn, Michał; Wietrzyk, Paulina; Lisowska, Maja; Klimek, Beata; Nicia, Paweł

2016-12-01

The main aim of this study was to identify variations in heavy metal concentrations in Cetrariella delisei along a transect from a High Arctic glacier forehead to the shoreline as well as determine the main environmental factors influencing the deposition of heavy metals in arctic lichens. The macrolichen Cetrariella delisei appears to be an interesting alternative to those lichen species used in the past (e.g. Flavocetraria nivalis, Cladonia sp.) for heavy metal biomonitoring purposes in the Arctic: it is widely distributed, easy to identify and reluctantly grazed by reindeer. Fieldwork was conducted in the summer of 2012 in the Kaffiøyra Plain, Oskar II Land, NW Spitsbergen. C. delisei and soil samples were collected from 5 localities. Concentrations of Cr, Mn, Ni, Cu, Zn, Pb, and Cd were measured in each sample. A bioaccumulation factor (BAF) was calculated for all the analyzed elements. The BAFs for Cu, Mn, and Ni showed a relatively low accumulation level in lichen thalli. On the other hand, the BAFs for Cr, Pb, and Zn, revealed an increased accumulation level in C. delisei. The Cd content in lichen is almost equal to its level in the soil. The statistical analyses covered three environmental factors: soil pH, substrate type and distance from the shoreline. The data were examined using the Kruskal-Wallis test, canonical correspondence analysis and a permutation test. The results show that distance from the shoreline had the greatest influence on the majority of the heavy metal concentrations in the lichen thalli and the soil. However, the level of Mn accumulated in the soil is determined by its source in the glacier. Moreover, the soil pH had the greatest effect on the Cd accumulated in the soil and the Mn accumulated in the lichen thalli.

Heavy metal contents in the sediments of astatic ponds: Influence of geomorphology, hydroperiod, water chemistry and vegetation.

PubMed

Gołdyn, Bartłomiej; Chudzińska, Maria; Barałkiewicz, Danuta; Celewicz-Gołdyn, Sofia

2015-08-01

The contents of heavy metals (Cd, Cr, Cu, Ni, Pb, Zn) were analysed in the bottom sediments of 30 small, astatic ponds located in the agricultural landscape of Western Poland. The samples were collected from 118 stations located in patches of four vegetation types. Relationships between the contents of particular elements and four groups of factors (geomorphology, hydroperiod, water quality and vegetation) were tested using Redundancy Analysis (RDA). The most important factors influencing the heavy metal contents were the maximum depth and area of the pond, its hydroperiod, water pH and conductivity values. In general, low quantities of heavy metals were recorded in the sediments of kettle-like ponds (small but located in deep depressions) and high in water bodies of the shore-bursting type (large but shallow). Moreover, quantities of particular elements were influenced by the structure of the vegetation covering the pond. Based on the results, we show which types of astatic ponds are most exposed to contamination and suggest some conservation practices that may reduce the influx of heavy metals. Copyright © 2015 Elsevier Inc. All rights reserved.

Effect of the edaphic factors and metal content in soil on the diversity of Trichoderma spp.

PubMed

Racić, Gordana; Körmöczi, Péter; Kredics, László; Raičević, Vera; Mutavdžić, Beba; Vrvić, Miroslav M; Panković, Dejana

2017-02-01

Influence of edaphic factors and metal content on diversity of Trichoderma species at 14 different soil sampling locations, on two depths, was examined. Forty-one Trichoderma isolates from 14 sampling sites were determined as nine species based on their internal transcribed spacer (ITS) sequences. Our results indicate that weakly alkaline soils are rich sources of Trichoderma strains. Also, higher contents of available K and P are connected with higher Trichoderma diversity. Increased metal content in soil was not inhibiting factor for Trichoderma species occurrence. Relationship between these factors was confirmed by locally weighted sequential smoothing (LOESS) nonparametric smoothing analysis. Trichoderma strain (Szeged Microbiology Collection (SZMC) 22669) from soil with concentrations of Cr and Ni above remediation values should be tested for its potential for bioremediation of these metals in polluted soils.

Influence of eutrophication on metal bioaccumulation and oral bioavailability in oysters, Crassostrea angulata.

PubMed

Li, Shun-Xing; Chen, Li-Hui; Zheng, Feng-Ying; Huang, Xu-Guang

2014-07-23

Oysters (Crassostrea angulata) are often exposed to eutrophication. However, how these exposures influence metal bioaccumulation and oral bioavailability (OBA) in oysters is unknown. After a four month field experimental cultivation, bioaccumulation factors (BAF) of metals (Fe, Cu, As, Cd, and Pb) from seawater to oysters and metal oral bioavailability in oysters by bionic gastrointestinal tract were determined. A positive effect of macronutrient (nitrate N and total P) concentration in seawater on BAF of Cd in oysters was observed, but such an effect was not significant for Fe, Cu, Pb, and As. Only OBA of As was significantly positively correlated to N and P contents. For Fe, OBA was negatively correlated with N. The regular variation of the OBA of Fe and As may be due to the effect of eutrophication on the synthesis of metal granules and heat-stable protein in oysters, respectively.

Accumulation of Heavy Metals in Roadside Soil in Urban Area and the Related Impacting Factors.

PubMed

Wang, Meie; Zhang, Haizhen

2018-05-24

Heavy metal contamination in roadside soil due to traffic emission has been recognized for a long time. However, seldom has been reported regarding identification of critical factors influencing the accumulation of heavy metals in urban roadside soils due to the frequent disturbances such as the repair of damaged roads and green belt maintanance. Heavy metals in the roadside soils of 45 roads in Xihu district, Hangzhou city were investigated. Results suggested the accumulation of Cu, Pb, Cd, Cr, and Zn in roadside soil was affected by human activity. However, only two sites had Pb and Zn excessing the standards for residential areas, respectively, according to Chinese Environmental Quality Standards for soils. The concentrations of Cu, Pb, Cd, and Zn were significantly and positively correlated to soil pH and organic matter. An insignificant correlation between the age of the roads or vegetation cover types and the concentration of heavy metals was found although they were reported closely relating to the accumulation of heavy metals in roadside soils of highways. The highest Pb, Cd, and Cr taking place in sites with heavy traffic and significant differences in the concentrations of Cu, Pb, Cd, and Zn among the different categories of roads suggested the contribution of traffic intensity. However, it was difficult to establish a quantitative relationship between traffic intensity and the concentrations of heavy metals in the roadside soil. It could be concluded that impaction of traffic emission on the accumulation of heavy metals in roadside soils in urban area was slight and soil properties such as pH and organic matters were critical factors influencing the retention of heavy metals in soils.

Influence of heavy metals on the formation and the distribution behavior of PAH and PCDD/F during simulated fires.

PubMed

Wobst, M; Wichmann, H; Bahadir, M

2003-04-01

Combustion experiments were performed with an artificial fire load (polystyrene and quartz powder) in a laboratory scale incinerator in the presence of gaseous HCl to simulate accidental fire conditions. The aim of this investigation was to trace back the alterations of the formation and the distribution behavior of PAH and PCDD/PCDF to the presence of CuO or a mixture of metal oxides (CdO, CuO, Fe(2)O(3), PbO, MoO(3), ZnO). The total amount of the 16 PAH target compounds was reduced by the factor of 5-9 when the mixture of metal oxides was present rather than merely CuO. PAH patterns as well as their distribution behavior were significantly influenced by these oxides. In general, transportation inside the installation was enhanced for most of the 16 analyzed PAH. Only fluorene and dibenzo[a,h]anthracene were transported to a smaller extent. In contrast to PAH, total concentrations of PCDD were increased by factor 9 and of PCDF by factor 10, respectively, when CuO was present. Adding the mixture of metal oxides resulted in an increase of PCDD by factor 14 and of PCDF by factor 7. CuO and the mixture of metal oxides had a different influence on the PCDD/F homologue patterns. For instance, the HxCDF to OCDF ratio after incineration without any metal oxide was 1 to 6, whereas addition of CuO or the mixture of the metal oxides shifted the HxCDF to OCDF ratios towards 1 to 40 or 1 to 17, respectively. Combustion along with CuO increased transportation of higher chlorinated PCDF congeners, whereas the mixture of the metal oxides caused a strong decrease of PCDF distribution throughout the system.

Environmental Factors Determining the Accumulation of Metals: Cu, Zn, Mn and Fe in Tissues of Taraxacum sp. sect. Taraxacum.

PubMed

Królak, Elżbieta; Marciniuk, Jolanta; Popijantus, Katarzyna; Wasilczuk, Paulina; Kasprzykowski, Zbigniew

2018-05-19

The genus Taraxacum is used in the assessment of soil contamination with heavy metals. There are relatively few studies using sections or species representing this genus. The presented research was conducted in Poland on two habitats, varied in terms of nutrients and metals content. The content of selected metals in leaves and roots of Taraxacum sect. Taraxacum was determined. It was found that in the conditions of increased content of metals in the soil, the analysed species representing sect. Taraxacum accumulate higher amounts of metals in their leaves and roots. Factors of translocation of selected metals from roots to leaves of Taraxacum species, representing the Taraxacum section, are affected by i.a. soil reaction and the content of Corg, Ntot. in the soil. No influence of soil properties on metal biological concentration factor was observed.

Influence of acid volatile sulfides and metal concentrations on metal partitioning in contaminated sediments

USGS Publications Warehouse

Lee, J.-S.; Lee, B.-G.; Luoma, S.N.; Choi, H.J.; Koh, C.-H.; Brown, C.L.

2000-01-01

The influence of acid volatile sulfide (AVS) on the partitioning of Cd, Ni, and Zn in porewater (PW) and sediment as reactive metals (SEM, simultaneously extracted metals) was investigated in laboratory microcosms. Two spiking procedures were compared, and the effects of vertical geochemical gradients and infaunal activity were evaluated. Sediments were spiked with a Cd-Ni-Zn mixture (0.06, 3, 7.5 ??mol/g, respectively) containing four levels of AVS (0.5, 7.5, 15, 35 ??mol/g). The results were compared to sediments spiked with four levels of Cd-Ni-Zn mixtures at one AVS concentration (7.5 ??mol/g). A vertical redox gradient was generated in each treatment by an 18-d incubation with an oxidized water column. [AVS] in the surface sediments decreased by 65-95% due to oxidation during incubation; initial [AVS] was maintained at 0.5-7.5 cm depth. PW metal concentrations were correlated with [SEM - AVS] among all data. But PW metal concentrations were variable, causing the distribution coefficient, Kd(pw) (the ratio of [SEM] to PW metal concentrations) to vary by 2-3 orders of magnitude at a given [SEM - AVS]. One reason for the variability was that vertical profiles in PW metal concentrations appeared to be influenced by diffusion as well as [SEM - AVS]. The presence of animals appeared to enhance the diffusion of at least Zn. The generalization that PW metal concentrations are controlled by [SEM - AVS] is subject to some important qualifications if vertical gradients are complicated, metal concentrations vary, or equilibration times differ.The influence of acid volatile sulfide (AVS) on the partitioning of Cd, Ni, and Zn in porewater (PW) and sediment as reactive metals (SEM, simultaneously extracted metals) was investigated in laboratory microcosms. Two spiking procedures were compared, and the effects of vertical geochemical gradients and infaunal activity were evaluated. Sediments were spiked with a Cd-Ni-Zn mixture (0.06, 3, 7.5 ??mol/g, respectively) containing

Metal concentrations in aquatic environments of Puebla River basin, Mexico: natural and industrial influences.

PubMed

Morales-García, S S; Rodríguez-Espinosa, P F; Shruti, V C; Jonathan, M P; Martínez-Tavera, E

2017-01-01

The rapid urban expansion and presence of volcanoes in the premises of Puebla River basin in central Mexico exert significant influences over its aquatic environments. Twenty surface sediment samples from Puebla River basin consisting of R. Alseseca, R. Atoyac, and Valsequillo dam were collected during September 2009 and analyzed for major (Al, Fe, Mg, Ba, Ca, and K) and trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sr, V, and Zn) in order to identify the metal concentrations and their enrichment. R. Atoyac sediments presented higher concentrations of Ba (1193.8 μg g -1 ) and Pb (27.1 μg g -1 ) in comparison with the local reference sample values. All the metal concentrations except Sr for R. Alseseca sediments were within the range of local reference sample values indicating no significant external influence, whereas Valsequillo dam sediments had elevated concentrations of all the metals suggesting both natural and external influences in the study region. The magnitude of metal contamination was assessed using several indices such as geoaccumulation index (I geo ), enrichment factor (EF), degree of contamination (C d ), and pollution load index (PLI). The results suggest that As, Pb, and Zn were predominantly enriched in the Puebla River basin sediments. Comparing with sediment quality guidelines and ecotoxicological values, it is revealed that Cd, Cr, Cu, and Ni have possible harmful effects on the biological community. The present study provides an outlook of metal enrichment in Puebla River basin sediments, highlighting the necessity to conserve this river ecosystem for the near future.

Multiple factors impact the contents of heavy metals in vegetables in high natural background area of China.

PubMed

Gan, Yandong; Wang, Lihong; Yang, Guiqiang; Dai, Jiulan; Wang, Renqing; Wang, Wenxing

2017-10-01

A field survey was conducted to investigate the concentrations of chromium (Cr), nickel (Ni), copper (Cu), zinc (Zn), cadmium (Cd) and lead (Pb) in vegetables, corresponding cultivated soils and irrigation waters from 36 open sites in high natural background area of Wuzhou, South China. Redundancy analysis, Spearman's rho correlation analysis and multiple regression analysis were adopted to evaluate the contributions of impacting factors on metal contents in the edible parts of vegetables. This study concluded that leafy and root vegetables had relatively higher metal concentrations and adjusted transfer factor values compared to fruiting vegetables according to nonparametric tests. Plant species, total soil metal content and soil pH value were affirmed as three critical factors with the highest contribution rate among all the influencing factors. The bivariate curve equation models for heavy metals in the edible vegetable tissues were well fitted to predict the metal concentrations in vegetables. The results from this case study also suggested that it could be one of efficient strategies for clean agricultural production and food safety in high natural background area to breed vegetable varieties with low heavy metal accumulation and to enlarge planting scale of these varieties. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of uncertainties in turbine metal temperature predictions

NASA Technical Reports Server (NTRS)

Stepka, F. S.

1980-01-01

An analysis was conducted to examine the extent to which various factors influence the accuracy of analytically predicting turbine blade metal temperatures and to determine the uncertainties in these predictions for several accuracies of the influence factors. The advanced turbofan engine gas conditions of 1700 K and 40 atmospheres were considered along with those of a highly instrumented high temperature turbine test rig and a low temperature turbine rig that simulated the engine conditions. The analysis showed that the uncertainty in analytically predicting local blade temperature was as much as 98 K, or 7.6 percent of the metal absolute temperature, with current knowledge of the influence factors. The expected reductions in uncertainties in the influence factors with additional knowledge and tests should reduce the uncertainty in predicting blade metal temperature to 28 K, or 2.1 percent of the metal absolute temperature.

Influence of early diagenesis on the vertical distribution of metal forms in sediments of Bohai Bay, China.

PubMed

Lu, Xueqiang; Zhang, Yan; Liu, Honglei; Xing, Meinan; Shao, Xiaolong; Zhao, Feng; Li, Xiaojuan; Liu, Qiongqiong; Yu, Dan; Yuan, Xuezhu; Yuan, Min

2014-11-15

The influence of early diagenesis on the vertical distribution of metal forms in the sediments of Bohai Bay was discussed in this paper. The results showed that the concentrations were: Al > Fe ≈ Ca > Mn > Cr > Zn > Cu > Pb > Cd. In vertical distribution, the forms of Cr and Pb were stable from the top to the bottom. However, the exchangeable forms and acid-extracted forms of Cd, Cu and Zn presented an obvious declining trend. The metals would be transformed to more stable forms during the early-diagenesis process. Further analysis found that early diagenesis can change the sedimentary environment, affecting pH, oxidation-reduction potential (ORP), total dissolved solid (TDS) and the structure of organic matter (OM), all main factors influencing metal forms in the sediments of Bohai Bay. Copyright © 2014 Elsevier Ltd. All rights reserved.

Does fish reproduction and metabolic activity influence metal levels in fish intestinal parasites, acanthocephalans, during fish spawning and post-spawning period?

PubMed

Filipović Marijić, Vlatka; Vardić Smrzlić, Irena; Raspor, Biserka

2014-10-01

Application of fish intestinal parasites, acanthocephalans, as bioindicators in metal exposure assessment usually involves estimation of their metal levels and bioconcentration factors. Metal levels in parasite final host, fishes, are influenced by fish physiology but there is no data for acanthocephalan metal levels. Gastrointestinal Zn, Fe, Mn, Cd, Ag levels in European chub (Squalius cephalus L.) from the Sava River were significantly higher during chub spawning (April/May) compared to the post-spawning period (September). In acanthocephalans (Pomphorhynchus laevis and Acanthocephalus anguillae) significantly higher metal levels during chub spawning were observed only for Zn in P. laevis. Bioconcentration factors were twice as high for Fe, Mn, Ag, Pb in the post-spawning period, probably as a consequence of lower gastrointestinal metal levels in fish rather than metal exposure. Therefore, bioconcentration factors should be interpreted with caution, due to their possible variability in relation to fish physiology. In addition, gastrointestinal Cu, Cd and Pb levels were lower in infected than uninfected chub, indicating that metal variability in fishes might be affected by the presence of acanthocephalans. Copyright © 2014 Elsevier Ltd. All rights reserved.

Urinary heavy metal levels and relevant factors among people exposed to e-waste dismantling.

PubMed

Wang, Hongmei; Han, Mei; Yang, Suwen; Chen, Yanqing; Liu, Qian; Ke, Shen

2011-01-01

Primitive electronic waste (e-waste) recycling has become a growing environmental concern, and toxic heavy metals released from e-waste activities may continue to threaten the health of local people. To study the impact of heavy metals in people around e-waste sites, 349 people from e-waste recycling sites (exposure group) and 118 people from a green plantation (control group) were surveyed, and their urinary levels of lead (UPb), cadmium (UCd), manganese (UMn), copper (UCu), and Zinc (UZn) were assayed. Questionnaire surveys for risk factors were also performed and analyzed by using the Pearson correlation analysis. Results indicated that the levels of urinary Cd in both occupational dismantling people {GM(GSD) 0.72(0.71) ug/L} and non-occupational dismantling people {GM(GSD) 0.50(0.79) ug/L} were higher than the control group {GM(GSD) 0.27(0.85) ug/L}. Further analyses of correlations between urinary heavy metal levels and exposure factors in the exposed group revealed positive relationship between the duration of dismantling and the level of UPb (p < 0.05). Meanwhile, rice sources from local village have a positive correlation with the level of UPb and UCd (p < 0.01). Other factors, however, may also have influences on heavy metal burden, and not all urinary heavy metal levels can be contributed to e-waste dismantling exposure levels. Primitive e-waste recycling activities may contribute to the changes of urinary heavy metal levels and increase the health risk for those chronically working on e-waste dismantling. Copyright © 2010 Elsevier Ltd. All rights reserved.

The influence of negative current collector size on a liquid metal positive electrode

NASA Astrophysics Data System (ADS)

Mohammad, Ibrahim; Ashour, Rakan; Kelley, Douglas

2017-11-01

Fluid mixing in the positive electrode of a liquid metal battery (LMB) governs some performance-related factors such as the rate of charge and discharge of the battery. The negative current collector (NCC) of a LMB is always smaller than the positive current collector, implying that current is convergent at the NCC. Also, different NCC sizes introduce different thermal, electromagnetic, and flow boundary conditions. In this talk, I will show how our lab studies the influence of NCC diameter on the flow in a liquid metal positive electrode driven by electrical current. I will present measurements of the flow velocity taken via Ultrasonic Doppler Velocimetry (UDV) over a range of different currents, at different NCC diameters.

Relative Influence of Intrinsic and Extrinsic Factors on the Metal-Insulator Transition of VO2 Nanowires

NASA Astrophysics Data System (ADS)

Kim, In Soo

The influence of stoichiometry on the metal-insulator transition of vanadium dioxide (VO2) nanowires was investigated using Raman spectroscopy. Controlled reduction of nominally strain-free suspended VO2 nanowires was conducted by rapid thermal annealing (RTA). The deficiency in oxygen assisted in the unprecedented suppression of the metallic (R) phase to temperatures as low as 103 K through generation of free electrons. In a complementary manner, oxygen-rich conditions stabilized the metastable monoclinic (M2) and triclinic (T) phases. A pseudo-phase diagram with dimensions of temperature and stoichiometry was established, highlighting the accessibility of new phases in the nanowire geometry. Detection of the dynamic elastic response across the metal-insulator transition in suspended VO2 nanowires was enabled by fiber-coupled polarization dependent interferometry. Dual-beam Raman spectroscopy was developed to determine the local domain/phase structure of VO2 nanowires, which allowed for accurate modeling using COMSOL finite element analysis (FEA). The Young's moduli of the single crystal insulating (M1) and metallic (R) phases without artifacts were determined for the first time. The sources of dissipation were identified as clamping losses, structural losses, thermoelastic damping, and domain wall motion. While contribution of thermoelastic damping was found to be dominant in the terminal phases, extraordinary dissipation was observed upon formation and movement of domain walls. Finally, it was shown that creation of local defects could lead to new classes of tunable sensors with a discrete and programmable frequency response with temperature.

Essential Factors Influencing the Bonding Strength of Cold-Sprayed Aluminum Coatings on Ceramic Substrates

NASA Astrophysics Data System (ADS)

Drehmann, R.; Grund, T.; Lampke, T.; Wielage, B.; Wüstefeld, C.; Motylenko, M.; Rafaja, D.

2018-02-01

The present work summarizes the most important results of a research project dealing with the comprehensive investigation of the bonding mechanisms between cold-sprayed Al coatings and various poly- and monocrystalline ceramic substrates (Al2O3, AlN, Si3N4, SiC, MgF2). Due to their exceptional combination of properties, metallized ceramics are gaining more and more importance for a wide variety of applications, especially in electronic engineering. Cold spray provides a quick, flexible, and cost-effective one-step process to apply metallic coatings on ceramic surfaces. However, since most of the existing cold-spray-related publications focus on metallic substrates, only very little is known about the bonding mechanisms acting between cold-sprayed metals and ceramic substrates. In this paper, the essential factors influencing the bonding strength in such composites are identified. Besides mechanical tensile strength testing, a thorough analysis of the coatings and especially the metal/ceramic interfaces was conducted by means of HRTEM, FFT, STEM, EDX, EELS, GAXRD, and EBSD. The influence of substrate material, substrate temperature, and particle size is evaluated. The results suggest that, apart from mechanical interlocking, the adhesion of cold-sprayed metallic coatings on ceramics is based on a complex interplay of different mechanisms such as quasiadiabatic shearing, static recrystallization, and heteroepitaxial growth.

Irrigation water quality influences heavy metal uptake by willows in biosolids.

PubMed

Laidlaw, W Scott; Baker, Alan J M; Gregory, David; Arndt, Stefan K

2015-05-15

Phytoextraction is an effective method to remediate heavy metal contaminated landscapes but is often applied for single metal contaminants. Plants used for phytoextraction may not always be able to grow in drier environments without irrigation. This study investigated if willows (Salix x reichardtii A. Kerner) can be used for phytoextraction of multiple metals in biosolids, an end-product of the wastewater treatment process, and if irrigation with reclaimed and freshwater influences the extraction process. A plantation of willows was established directly onto a tilled stockpile of metal-contaminated biosolids and irrigated with slightly saline reclaimed water (EC ∼2 dS/cm) at a wastewater processing plant in Victoria, Australia. Biomass was harvested annually and analysed for heavy metal content. Phytoextraction of cadmium, copper, nickel and zinc was benchmarked against freshwater irrigated willows. The minimum irrigation rate of 700 mm per growing season was sufficient for willows to grow and extract metals. Increasing irrigation rates produced no differences in total biomass and also no differences in the extraction of heavy metals. The reclaimed water reduced both the salinity and the acidity of the biosolids significantly within the first 12 months after irrigation commenced and after three seasons the salinity of the biosolids had dropped to <15% of initial values. A flushing treatment to remove excess salts was therefore not necessary. Irrigation had an impact on biosolids attributes such as salinity and pH, and that this had an influence on metal extraction. Reclaimed water irrigation reduced the biosolid pH and this was associated with reductions of the extraction of Ni and Zn, it did not influence the extraction of Cu and enhanced the phytoextraction of Cd, which was probably related to the high chloride content of the reclaimed water. Our results demonstrate that flood-irrigation with reclaimed water was a successful treatment to grow willows in a

Biologics formulation factors affecting metal leachables from stainless steel.

PubMed

Zhou, Shuxia; Schöneich, Christian; Singh, Satish K

2011-03-01

An area of increasing concern and scientific scrutiny is the potential contamination of drug products by leachables entering the product during manufacturing and storage. These contaminants may either have a direct safety impact on the patients or act indirectly through the alteration of the physicochemical properties of the product. In the case of biotherapeutics, trace amounts of metal contaminants can arise from various sources, but mainly from contact with stainless steel (ss). The effect of the various factors, buffer species, solution fill volume per unit contact surface area, metal chelators, and pH, on metal leachables from contact with ss over time were investigated individually. Three major metal leachables, iron, chromium, and nickel, were monitored by inductively coupled plasma-mass spectrometry because they are the major components of 316L ss. Iron was primarily used to evaluate the effect of each factor since it is the most abundant. It was observed that each studied factor exhibited its own effect on metal leachables from contact with ss. The effect of buffer species and pH exhibited temperature dependence over the studied temperature range. The metal leachables decreased with the increased fill volume (mL) per unit contact ss surface area (cm(2)) but a plateau was achieved at approximately 3 mL/cm(2). Metal chelators produced the strongest effect in facilitating metal leaching. In order to minimize the metal leachables and optimize biological product stability, each formulation factor must be evaluated for its impact, to balance its risk and benefit in achieving the target drug product shelf life. © 2011 American Association of Pharmaceutical Scientists

Source identification, geochemical normalization and influence factors of heavy metals in Yangtze River Estuary sediment.

PubMed

Sun, Xueshi; Fan, Dejiang; Liu, Ming; Tian, Yuan; Pang, Yue; Liao, Huijie

2018-06-18

Sediment samples, including 40 surface samples and 12 sediment cores, were collected from 52 stations of the Yangtze River Estuary (YRE) in 2015 and 2016. The 95% linear prediction intervals (LPI) and principal components analysis (PCA), were conducted to evaluate the metal sources and grain-size effect (GSE). The in situ physico-chemical properties of pH, Eh, DO, salinity, temperature and turbidity were combined to elucidate the relationships between environmental factors and the fate of heavy metals in the river-estuary-shelf system. This study indicates a decreasing trend of metals in sediments from the estuary towards the adjacent shelf and the river channel and that Zn, Cu and Cr are mainly derived from natural processes throughout the catchment, whereas Pb appears to have anthropogenic inputs via atmospheric deposition. Furthermore, considering the best fit regression lines between the concentrations of Al and heavy metals as well as the deficiencies of the conventional C elements /C Al method, we introduce an approach (Al-SN: Al-scope normalization) that can eliminate the GSE on heavy metals and be applied to other estuaries. After Al-scope normalization, the relatively constant levels of Zn, Cu and Cr that remain in sediments from the river channel to the estuary and shelf confirmed that the variation of grain size in sediments almost entirely explained the distribution patterns of sediment toxicity in the YRE, while the enrichment of Pb in estuarine sediments could be attributed to its chemical species and physico-chemical properties. The results further suggest that the relationship between grain size and spatial behavior of sediment pollutants should be given priority over the contamination assessment and provenance discrimination in estuarine or similar environments with complex sediment compositions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Influence of metal bonding layer on strain transfer performance of FBG

NASA Astrophysics Data System (ADS)

Liu, Hao; Chen, Weimin; Zhang, Peng; Liu, Li; Shu, Yuejie; Wu, Jun

2013-01-01

Metal bonding layer seriously affects the strain transfer performance of Fiber Bragg Grating (FBG). Based on the mode of FBG strain transfer, the influence of the length, the thickness, Poisson's ratio, elasticity modulus of metal bonding layer on the strain transfer coefficient of FBG is analyzed by numerical simulation. FBG is packaged to steel wire using metal bonding technology of FBG. The tensile tests of different bonding lengths and elasticity modulus are carried out. The result shows the strain transfer coefficient of FBGs are 0.9848,0.962 and their average strain sensitivities are 1.076 pm/μɛ,1.099 pm/μɛ when the metal bonding layer is zinc, whose lengths are 15mm, 20mm, respectively. The strain transfer coefficient of FBG packaged by metal bonding layer raises 8.9 percent compared to epoxy glue package. The preliminary experimental results show that the strain transfer coefficient increases with the length of metal bonding layer, decreases with the thickness of metal bonding layer and the influence of Poisson's ratio can be ignored. The experiment result is general agreement with the analysis and provides guidance for metal package of FBG.

Impacts of geochemical and environmental factors on seasonal variation of heavy metals in a coastal lagoon Yucatan, Mexico.

PubMed

Arcega-Cabrera, F; Garza-Pérez, R; Noreña-Barroso, E; Oceguera-Vargas, I

2015-01-01

This study investigated the influence of geochemical and environmental factors on seasonal variation in metals in Yucatan's Chelem lagoon. Anthropogenic activities discharge non-treated wastewater directly into it with detrimental environmental consequences. Accordingly, this study established the spatial and temporal patterns of fine grain sediments and concentrations of heavy metals. Multivariate analyses showed fine grain facies deposition, transition sites dominated by fine grain transport, and fine grain erosion sites. Spatial and temporal variations of heavy metals concentration were significant for Cd, Cu, Cr, and Pb. As, Cd, and Sn were as much as 12 times higher than SQuiRTs standards (Buchman 2008). The results indicate that aquifer water is bringing metals from relatively far inland and releasing them into the lagoon. Thus, it appears that the contamination of this lagoon is highly complex and must take into account systemic connections with inland anthropogenic activates and pollution, as well as local factors.

Factors that Influence the Price of Al, Cd, Co, Cu, Fe, Ni, Pb, Rare Earth Elements, and Zn

USGS Publications Warehouse

Papp, John F.; Bray, E. Lee; Edelstein, Daniel L.; Fenton, Michael D.; Guberman, David E.; Hedrick, James B.; Jorgenson, John D.; Kuck, Peter H.; Shedd, Kim B.; Tolcin, Amy C.

2008-01-01

This report is based on a presentation delivered at The 12th International Battery Materials Recycling Seminar, March 17-20, 2008, Fort Lauderdale, Fla., about the factors that influence prices for aluminum, cadmium, cobalt, copper, iron, lead, nickel, rare earth elements, and zinc. These are a diverse group of metals that are of interest to the battery recycling industry. Because the U.S. Geological Survey (USGS) closely monitors, yet neither buys nor sells, metal commodities, it is an unbiased source of metal price information and analysis. The authors used information about these and other metals collected and published by the USGS (U.S. production, trade, stocks, and prices and world production) and internationally (consumption and stocks by country) from industry organizations, because metal markets are influenced by activities and events over the entire globe. Long-term prices in this report, represented by unit values, were adjusted to 1998 constant dollars to remove the effects of inflation. A previous USGS study in this subject area was 'Economic Drivers of Mineral Supply' by Lorie A. Wagner, Daniel E. Sullivan, and John L. Sznopek (USGS Open File Report 02-335). By seeking a common cause for common behavior of prices among the various metal commodities, the authors found that major factors that influence prices of metal commodities were international events such as wars and recessions, and national events such as the dissolution of the Soviet Union in 1991 and economic growth in China, which started its open door policy in the 1970s but did not have significant market impact until the 1990s. Metal commodity prices also responded to commodity-specific events such as tariff or usage changes or mine strikes. It is shown that the prices of aluminum, cadmium, copper, iron, lead, nickel, and zinc are at historic highs, that world stocks are at (or near) historic lows, and that China's consumption of these metals had increased substantially, making it the world

Study of the factors influencing the metals solubilisation from a mixture of waste batteries by response surface methodology.

PubMed

Tanong, Kulchaya; Coudert, Lucie; Chartier, Myriam; Mercier, Guy; Blais, Jean-François

2017-12-01

This paper presents an innovative process for the recovery of valuable metals from a mixture of spent batteries. Different types of batteries, including alkaline, zinc-carbon (Zn-C), nickel cadmium (Ni-Cd), nickel metal hydride (Ni-MH), lithium ion (Li-ion) and lithium metallic (Li-M) batteries, were mixed according to the proportion of the Canadian sales of batteries. A Box-Behnken design was applied to find the optimum leaching conditions allowing a maximum of valuable metal removals from a mixture of spent batteries in the presence of an inorganic acid and a reducing agent. The results highlighted the positive effect of sodium metabisulfite on the performance of metals removal, especially for Mn. The solid/liquid ratio and the concentration of H 2 SO 4 were the main factors affecting the leaching behavior of valuable metals (Zn, Mn, Cd, Ni) present in spent batteries. Finally, the optimum leaching conditions were found as follows: one leaching step, solid/liquid ratio = 10.9%, [H 2 SO 4 ] = 1.34 M, sodium metabisulfite (Na 2 S 2 O 5 ) = 0.45 g/g of battery powder and retention time = 45 min. Under such conditions, the removal yields achieved were 94% for Mn, 81% for Cd, 99% for Zn, 96% for Co and 68% for Ni.

Temporal variations of heavy metals in coral Porites lutea from Guangdong Province, China: Influences from industrial pollution, climate and economic factors

USGS Publications Warehouse

Peng, Z.; Liu, J.; Zhou, C.; Nie, B.; Chen, T.

2006-01-01

The correlation coefficients among the metals and climatic and economic factors indicate that the metals Ni, Zn, and Cd behave similarly. Copper and Mn are positively correlated, and cobalt is negatively correlated with Cr, Ni, Zn, and Cd. Lead is not correlated with any other metals but is correlated with sea surface water temperature, air temperature, GDP and industrial-agricultural production in Dianbai County. Lead in corals is related to the enhanced pollution level of ocean waters as a result of increased industrial activities.

Microbiologically influenced corrosion of orthodontic metallic appliances.

PubMed

Kameda, Takashi; Oda, Hirotake; Ohkuma, Kazuo; Sano, Natsuki; Batbayar, Nomintsetseg; Terashima, Yukari; Sato, Soh; Terada, Kazuto

2014-01-01

Biocorrosion (microbiologically influenced corrosion; MIC) occur in aquatic habitats varying in nutrient content, temperature, stress and pH. The oral environment of organisms, including humans, should be one of the most hospitable for MIC. Corrosion of metallic appliances in the oral region is one cause of metal allergy in patients. In this study, an inductively coupled plasma-optical emission spectrometer revealed elution of Fe, Cr and Ni from stainless steel (SUS) appliances incubated with oral bacteria. Three-dimensional laser confocal microscopy also revealed that oral bacterial culture promoted increased surface roughness and corrosion pits in SUS appliances. The pH of the supernatant was lowered after co-culture of appliances and oral bacteria in any combinations, but not reached at the level of depassivation pH of their metallic materials. This study showed that Streptococcus mutans and Streptococcus sanguinis which easily created biofilm on the surfaces of teeth and appliances, did corrode orthodontic SUS appliances.

Major factors influencing bacterial leaching of heavy metals (Cu and Zn) from anaerobic sludge.

PubMed

Couillard, D; Chartier, M; Mercier, G

1994-01-01

Anaerobically digested sewage sludges were treated for heavy metal removal through a biological solubilization process called bacterial leaching (bioleaching). The solubilization of copper and zinc from these sludges is described in this study: using continuously stirred tank reactors with and without sludge recycling at different mean hydraulic residence times (1, 2, 3 and 4 days). Significant linear equations were established for the solubilization of zinc and copper according to relevant parameters: oxygen reduction potential (ORP), pH and residence time (t). Zinc solubilization was related to the residence time with a r2 (explained variance) of 0.82. Considering only t=2 and 3 days explained variance of 0.31 and 0.24 were found between zinc solubilization as a function of ORP and pH indicating a minor importance of those two factors for this metal in the range of pH and ORP experimented. Cu solubilization was weakly correlated to mean hydraulic residence time (r2=0.48), while it was highly correlated to ORP (r2=0.80) and pH (r2=0.62) considering only t of 2 and 3 days in the case of pH and ORP. The ORP dependence of Cu solubilization has been clearly demonstrated in this study. In addition to this, the importance of the substrate concentration for Cu solubilization has been confirmed. The hypothesis of a biological solubilization of Cu by the indirect mechanism has been supported. The results permit, under optimum conditions, the drawing of linear equations which will allow prediction of metal solubilization efficiencies from the parameters pH (Cu), ORP (Cu) and residence time (Cu and Zn), during the treatment. The linear regressions will be a useful tool for routine operation of the process.

[Natural factors influencing sleep].

PubMed

Jurkowski, Marek K; Bobek-Billewicz, Barbara

2007-01-01

Sleep is a universal phenomenon of human and animal lives, although the importance of sleep for homeo-stasis is still unknown. Sleep disturbances influence many behavioral and physiologic processes, leading to health complications including death. On the other hand, sleep improvement can beneficially influence the course of healing of many disorders and can be a prognostic of health recovery. The factors influencing sleep have different biological and chemical origins. They are classical hormones, hypothalamic releasing and inhibitory hormones, neuropeptides, peptides and others as cytokines, prostaglandins, oleamid, adenosine, nitric oxide. These factors regulate most physiologic processes and are likely elements integrating sleep with physiology and physiology with sleep in health and disorders.

Concentrations of metals in tissues of lowbush blueberry (Vaccinium angustifolium) near a copper-nickel smelter at Sudbury, Ontario, Canada: A factor analytic approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bagatto, G.; Shorthouse, J.D.; Crowder, A.A.

1993-10-01

Ecosystems damaged by emissions from the copper-nickel smelters of Inco and Falconbridge Ltd. near Sudbury, Ontario, Canada have provided a unique opportunity to study the effects of metal particulates and sulphur dioxide fumigations on plant and animal communities. The most infamous terrain in the Sudbury region is nearest the smelters (two active and one closed), where nearly all vegetation has been destroyed and soils eroded and contaminated. However, over all the past twenty years, some species of plants have developed a tolerance to polluted soils and some denuded lands have been naturally and artificially revegetated. Furthermore, a series of uniquemore » anthropogenic forests have developed away from the smelters. Several studies on the accumulation of metals in plant tissues indicate the levels of metals are usually highest closest to the smelters. Consequently, several studies have reported high correlations between plant concentrations of certain metals with distance from the source of pollution. However, tissue metal burdens are not always correlated with distance from the emission source, suggesting that other biological and physico-chemical factors may influence tissue metal burdens in the Sudbury habitat. The present study provides information on the metal burdens in another plant, lowbush blueberry, growing both near and away from the smelters. This study assesses the apparent influence of the Sudbury smelting operations on plant tissue burdens of five additional elements, along with copper and nickel, by using a factor analytic approach. This approach will allow determination of underlying factors which govern tissue metal burdens in a polluted environment and helps to refine the future direction of research in the Sudbury ecosystem. 12 refs., 2 tabs.« less

The influence of bioavailable heavy metals and microbial parameters of soil on the metal accumulation in rice grain.

PubMed

Xiao, Ling; Guan, Dongsheng; Peart, M R; Chen, Yujuan; Li, Qiqi; Dai, Jun

2017-10-01

A field-based study was undertaken to analyze the effects of soil bioavailable heavy metals determined by a sequential extraction procedure, and soil microbial parameters on the heavy metal accumulation in rice grain. The results showed that Cd, Cr, Cu, Ni, Pb and Zn concentrations in rice grain decreases by 65.9%, 78.9%, 32.6%, 80.5%, 61.0% and 15.7%, respectively in the sites 3 (far-away), compared with those in sites 1 (close-to). Redundancy analysis (RDA) indicated that soil catalase activity, the MBC/MBN ratio, along with bioavailable Cd, Cr and Ni could explain 68.9% of the total eigenvalue, indicating that these parameters have a great impact on the heavy metal accumulation in rice grain. The soil bioavailable heavy metals have a dominant impact on their accumulation in rice grain, with a variance contribution of 60.1%, while the MBC/MBN has a regulatory effect, with a variance contribution of 4.1%. Stepwise regression analysis showed that the MBC/MBN, urease and catalase activities are the key microbial parameters that affect the heavy metal accumulation in rice by influencing the soil bioavailable heavy metals or the translocation of heavy metals in rice. RDA showed an interactive effect between Cu, Pb and Zn in rice grain and the soil bioavailable Cd, Cr and Ni. The heavy metals in rice grain, with the exception of Pb, could be predicted by their respective soil bioavailable heavy metals. The results suggested that Pb accumulation in rice grain was mainly influenced by the multi-metal interactive effects, and less affected by soil bioavailable Pb. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of market factors on the short-time pricing of stock-exchange metals

NASA Astrophysics Data System (ADS)

Bogdanov, S. V.; Shevelev, I. M.; Chernyi, S. A.

2016-12-01

The open trade on the world market is estimated using information of one-day exchange prices of nonferrous and precious metals, oil, reduced crude, and gasoline and the main world stock indices in the time period from January 1, 2009 to December 31, 2015. It is found that the short-term changes in the prices of nonferrous metals are determined by the prices on the metal market. The changes in the prices of energy carriers and the stock trade on the stock market weakly influence the pricing of nonferrous and precious metals. The prices of metals depend on the situation during trade on commodity exchanges, and the stock market indirectly influences the exchange prices of metals through changes in the share prices of the companies that produce copper, aluminum, and zinc.

Spatially Explicit Analysis of Metal Transfer to Biota: Influence of Soil Contamination and Landscape

PubMed Central

Fritsch, Clémentine; Cœurdassier, Michaël; Giraudoux, Patrick; Raoul, Francis; Douay, Francis; Rieffel, Dominique; de Vaufleury, Annette; Scheifler, Renaud

2011-01-01

Concepts and developments for a new field in ecotoxicology, referred to as “landscape ecotoxicology,” were proposed in the 1990s; however, to date, few studies have been developed in this emergent field. In fact, there is a strong interest in developing this area, both for renewing the concepts and tools used in ecotoxicology as well as for responding to practical issues, such as risk assessment. The aim of this study was to investigate the spatial heterogeneity of metal bioaccumulation in animals in order to identify the role of spatially explicit factors, such as landscape as well as total and extractable metal concentrations in soils. Over a smelter-impacted area, we studied the accumulation of trace metals (TMs: Cd, Pb and Zn) in invertebrates (the grove snail Cepaea sp and the glass snail Oxychilus draparnaudi) and vertebrates (the bank vole Myodes glareolus and the greater white-toothed shrew Crocidura russula). Total and CaCl2-extractable concentrations of TMs were measured in soils from woody patches where the animals were captured. TM concentrations in animals exhibited a high spatial heterogeneity. They increased with soil pollution and were better explained by total rather than CaCl2-extractable TM concentrations, except in Cepaea sp. TM levels in animals and their variations along the pollution gradient were modulated by the landscape, and this influence was species and metal specific. Median soil metal concentrations (predicted by universal kriging) were calculated in buffers of increasing size and were related to bioaccumulation. The spatial scale at which TM concentrations in animals and soils showed the strongest correlations varied between metals, species and landscapes. The potential underlying mechanisms of landscape influence (community functioning, behaviour, etc.) are discussed. Present results highlight the need for the further development of landscape ecotoxicology and multi-scale approaches, which would enhance our understanding of

Factors affecting fixation of heavy metals in solidified/stabilized matrix: a review.

PubMed

Malviya, Rachana; Chaudhary, Rubina

2010-07-01

In this paper, an effort has been made to understand the factors, which affect fixation of heavy metals in solidified/stabilized matrix. Various aspects related to the solidification/stabilization of different heavy metals (Ar, Ba, Cu, Cr, Pb, Zn, Hg) are reviewed. A comparative study of different binders for the fixation of each metal has also been carried out to suggest the most suitable binder, pretreatment required for the metal. Valence, speciation, pH and other factors are also considered while reviewing metal retention capacity of different matrix.

Distributions and contamination assessment of heavy metals in the surface sediments of western Laizhou Bay: Implications for the sources and influencing factors.

PubMed

Zhang, Pan; Hu, Rijun; Zhu, Longhai; Wang, Peng; Yin, Dongxiao; Zhang, Lianjie

2017-06-15

Heavy metals (Cu, Pb, Cr, Cd and As) contents in surface sediments from western Laizhou Bay were analysed to evaluate the spatial distribution pattern and their contamination level. As was mainly concentrated in the coastal area near the estuaries and the other metals were mainly concentrated in the central part of the study area. The heavy metals were present at unpolluted levels overall evaluated by the sediment quality guidelines and geoaccumulation index. Principal component analysis suggest that Cu, Pb and Cd were mainly sourced from natural processes and As was mainly derived from anthropogenic inputs. Meanwhile, Cr originated from both natural processes and anthropogenic contributions. Tidal currents, sediments and human activities were important factors affecting the distribution of heavy metals. The heavy metal environment was divided into four subareas to provide a reference for understanding the distribution and pollution of heavy metals in the estuary-bay system. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors influencing twins and zygosity.

PubMed

Hankins, Gary V D; Saade, George R

2005-01-01

Zygosity is influenced by many factors. Monozygotic twins occur spontaneously in approximately 1 in 250 births and are felt to increase twofold with ovulation induction techniques. Monozygotic twinning also increases in proportion to the number of blastocysts transferred during in vitro fertilisation. In contrast, dizygotic twinning appears to be influenced by race, genetic factors, maternal age, fertility enhancing drugs, folic acid supplementation, and maternal nutritional status.

Influence of Solute Content and Solidification Parameters on Grain Refinement of Aluminum Weld Metal

NASA Astrophysics Data System (ADS)

Schempp, Philipp; Cross, Carl Edward; Pittner, Andreas; Rethmeier, Michael

2013-07-01

Grain refinement provides an important possibility to enhance the mechanical properties ( e.g., strength and ductility) and the weldability (susceptibility to solidification cracking) of aluminum weld metal. In the current study, a filler metal consisting of aluminum base metal and different amounts of commercial grain refiner Al Ti5B1 was produced. The filler metal was then deposited in the base metal and fused in a GTA welding process. Additions of titanium and boron reduced the weld metal mean grain size considerably and resulted in a transition from columnar to equiaxed grain shape ( CET). In commercial pure aluminum (Alloy 1050A), the grain-refining efficiency was higher than that in the Al alloys 6082 and 5083. Different welding and solidification parameters influenced the grain size response only slightly. Furthermore, the observed grain-size reduction was analyzed by means of the undercooling parameter P and the growth restriction parameter Q, which revealed the influence of solute elements and nucleant particles on grain size.

Influence of hole transport material/metal contact interface on perovskite solar cells

NASA Astrophysics Data System (ADS)

Lei, Lei; Zhang, Shude; Yang, Songwang; Li, Xiaomin; Yu, Yu; Wei, Qingzhu; Ni, Zhichun; Li, Ming

2018-06-01

Interfaces have a significant impact on the performance of perovskite solar cells. This work investigated the influence of hole transport material/metal contact interface on photovoltaic behaviours of perovskite solar devices. Different hole material/metal contact interfaces were obtained by depositing the metal under different conditions. High incident kinetic energy metal particles were proved to penetrate and embed into the hole transport material. These isolated metal particles in hole transport materials capture holes and increase the apparent carrier transport resistance of the hole transport layer. Sample temperature was found to be of great significance in metal deposition. Since metal vapour has a high temperature, the deposition process accumulated a large amount of heat. The heat evaporated the additives in the hole transport layer and decreased the hole conductivity. On the other hand, high temperature may cause iodization of the metal contact.

Influence of hole transport material/metal contact interface on perovskite solar cells.

PubMed

Lei, Lei; Zhang, Shude; Yang, Songwang; Li, Xiaomin; Yu, Yu; Wei, Qingzhu; Ni, Zhichun; Li, Ming

2018-06-22

Interfaces have a significant impact on the performance of perovskite solar cells. This work investigated the influence of hole transport material/metal contact interface on photovoltaic behaviours of perovskite solar devices. Different hole material/metal contact interfaces were obtained by depositing the metal under different conditions. High incident kinetic energy metal particles were proved to penetrate and embed into the hole transport material. These isolated metal particles in hole transport materials capture holes and increase the apparent carrier transport resistance of the hole transport layer. Sample temperature was found to be of great significance in metal deposition. Since metal vapour has a high temperature, the deposition process accumulated a large amount of heat. The heat evaporated the additives in the hole transport layer and decreased the hole conductivity. On the other hand, high temperature may cause iodization of the metal contact.

Does the casting mode influence microstructure, fracture and properties of different metal ceramic alloys?

PubMed

Bauer, José Roberto de Oliveira; Grande, Rosa Helena Miranda; Rodrigues-Filho, Leonardo Eloy; Pinto, Marcelo Mendes; Loguercio, Alessandro Dourado

2012-01-01

The aim of the present study was to evaluate the tensile strength, elongation, microhardness, microstructure and fracture pattern of various metal ceramic alloys cast under different casting conditions. Two Ni-Cr alloys, Co-Cr and Pd-Ag were used. The casting conditions were as follows: electromagnetic induction under argon atmosphere, vacuum, using blowtorch without atmosphere control. For each condition, 16 specimens, each measuring 25 mm long and 2.5 mm in diameter, were obtained. Ultimate tensile strength (UTS) and elongation (EL) tests were performed using a Kratos machine. Vickers Microhardness (VM), fracture mode and microstructure were analyzed by SEM. UTS, EL and VM data were statistically analyzed using ANOVA. For UTS, alloy composition had a direct influence on casting condition of alloys (Wiron 99 and Remanium CD), with higher values shown when cast with Flame/Air (p < 0.05). The factors 'alloy" and 'casting condition" influenced the EL and VM results, generally presenting opposite results, i.e., alloy with high elongation value had lower hardness (Wiron 99), and casting condition with the lowest EL values had the highest VM values (blowtorch). Both factors had significant influence on the properties evaluated, and prosthetic laboratories should select the appropriate casting method for each alloy composition to obtain the desired property.

[Bioaccumulation and Biomagnification of Heavy Metals in Three Gorges Reservoir and Effect of Biological Factors].

PubMed

Wei, Li-li; Zhou, Qiong; Xie, Cong-xin; Wang, Jun; Li, Jun

2016-01-15

Three Gorges Reservoir (TGR) reached the maximum water level (175 m) of impoundment in Oct. 2010. In order to reveal the potential influence of the greatest water-level impoundment on the heavy metal pollution in the typical waters of TGR, the content level of trace metals ( Hg, Cd and Pb) in biota and potential biomagnification along the aquatic food chain were investigated in the main stem of TGR from July 2011 to August 2012, as well as the relationship between the trace metal concentrations of aquatic consumers (fish and aquatic invertebrate) and biological factors. Our study showed that no individual data of the three trace metals in biota exceeded the edible safety criteria of aquatic products in China and FAO. In contrast with those before the impoundment of TGR, Hg showed a little higher, while Cd and Pb exhibited a little lower level after the impoundment. Trace metals in TGR exhibited relatively lower concentrations compared with those in reservoirs in other countries. Significant correlations were found between the Cd concentration and body size (body length and body weight) of Cyprinus carpio, as well as the Hg concentration and body size (body length and body weight) of Erythroculter ilishaeformis. As for feeding habits, there was statistically significant difference between trace metal concentrations in herbivorous, planktonic, omnivorous and carnivorous fish. However, no significant difference was found between the metal concentrations in fish with different habitats (pelagic, mesopelagic and benthic). Even so, the overall trend was that fish living in benthic layer had higher heavy metal concentrations than those in pelagic and mesopelagic zones. The regression slopes of log-Hg concentration versus delta(15)N, served as an indicator of trophic magnification factor (TMF). Significant correlations (P < 0.05) were observed for Hg in the food web of TGR. TMF of Hg in TGR indicated lower level (0.046-0.066) in contrast with those in the reservoirs of

Interrelationships of metal transfer factor under wastewater reuse and soil pollution.

PubMed

Papaioannou, D; Kalavrouziotis, I K; Koukoulakis, P H; Papadopoulos, F; Psoma, P

2018-06-15

The transfer of heavy metals under soil pollution wastewater reuse was studied in a Greenhouse experiment using a randomized block design, including 6 treatments of heavy metals mixtures composed of Zn, Mn, Cd, Co, Cu, Cr, Ni, and Pb, where each metal was taking part in the mixture with 0, 10, 20, 30, 40, 50 mg/kg respectively, in four replications. The Beta vulgaris L (beet) was used as a test plant. It was found that the metal transfer factors were statistically significantly related to the: (i) DTPA extractable soil metals, (ii) the soil pollution level as assessed by the pollution indices, (iii) the soil pH, (iv) the beet dry matter yield and (v) the interactions between the heavy metals in the soil. It was concluded that the Transfer Factor is subjected to multifactor effects and its real nature is complex, and there is a strong need for further study for the understanding of its role in metal-plant relationships. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of sulfhydryl sites on metal binding by bacteria

NASA Astrophysics Data System (ADS)

Nell, Ryan M.; Fein, Jeremy B.

2017-02-01

The role of sulfhydryl sites within bacterial cell envelopes is still unknown, but the sites may control the fate and bioavailability of metals. Organic sulfhydryl compounds are important complexing ligands in aqueous systems and they can influence metal speciation in natural waters. Though representing only approximately 5-10% of the total available binding sites on bacterial surfaces, sulfhydryl sites exhibit high binding affinities for some metals. Due to the potential importance of bacterial sulfhydryl sites in natural systems, metal-bacterial sulfhydryl site binding constants must be determined in order to construct accurate models of the fate and distribution of metals in these systems. To date, only Cd-sulfhydryl binding has been quantified. In this study, the thermodynamic stabilities of Mn-, Co-, Ni-, Zn-, Sr- and Pb-sulfhydryl bacterial cell envelope complexes were determined for the bacterial species Shewanella oneidensis MR-1. Metal adsorption experiments were conducted as a function of both pH, ranging from 5.0 to 7.0, and metal loading, from 0.5 to 40.0 μmol/g (wet weight) bacteria, in batch experiments in order to determine if metal-sulfhydryl binding occurs. Initially, the data were used to calculate the value of the stability constants for the important metal-sulfhydryl bacterial complexes for each metal-loading condition studied, assuming a single binding reaction for the dominant metal-binding site type under the pH conditions of the experiments. For most of the metals that we studied, these calculated stability constant values increased significantly with decreasing metal loading, strongly suggesting that our initial assumption was not valid and that more than one type of binding occurs at the assumed binding site. We then modeled each dataset with two distinct site types with identical acidity constants: one site with a high metal-site stability constant value, which we take to represent metal-sulfhydryl binding and which dominates under low

Insufficient acetabular version increases blood metal ion levels after metal-on-metal hip resurfacing.

PubMed

Hart, Alister J; Skinner, John A; Henckel, Johann; Sampson, Barry; Gordon, Fabiana

2011-09-01

Many factors affect the blood metal ion levels after metal-on-metal (MOM) hip arthroplasty. The main surgically adjustable variable is the amount of coverage of the head provided by the cup which is a function of the inclination and version angles. However, most studies have used plain radiographs which have questionable precision and accuracy, particularly for version and large diameter metal heads; further, these studies do not simultaneously assess version and inclination. Thus the relationship between version and blood metal ions levels has not been resolved. We determined whether cup inclination and version influence blood metal ion levels while adjusting for age at assessment, gender, body mass index, horizontal femoral offset, head size, manufacturer hip type, and Oxford hip score. We prospectively followed 100 individuals (51 females, 49 males) with unilateral MOM hip resurfacing who underwent clinical assessment, CT scanning, and blood metal ion measurement. Multiple regression analysis was used to determine which variables were predictors of blood metal ion levels and to model the effect of these variables. Only cup inclination, version angles, and gender influenced blood cobalt or chromium levels. Cobalt and chromium levels positively correlated with inclination angle and negatively correlated with version angle. The effect of changes in version angle was less than for inclination angle. Based on our observations, we developed a formula to predict the effect of these parameters on metal ion levels. Our data suggest insufficient cup version can cause high blood metal ions after MOM hip arthroplasty. We were unable to show that excessive version caused high levels. Level II, prognostic study. See Guidelines for Authors for a complete description of levels of evidence.

Biodegradation of petroleum hydrocarbons in estuarine sediments: metal influence.

PubMed

Almeida, Raquel; Mucha, Ana P; Teixeira, Catarina; Bordalo, Adriano A; Almeida, C Marisa R

2013-02-01

In this work, the potential effect of metals, such as Cd, Cu and Pb, on the biodegradation of petroleum hydrocarbons in estuarine sediments was investigated under laboratory conditions. Sandy and muddy non-vegetated sediments were collected in the Lima River estuary (NW Portugal) and spiked with crude oil and each of the metals. Spiked sediments were left in the dark under constant shaking for 15 days, after which crude oil biodegradation was evaluated. To estimate microbial abundance, total cell counts were obtained by DAPI staining and microbial community structure was characterized by ARISA. Culturable hydrocarbon degraders were determined using a modified most probable number protocol. Total petroleum hydrocarbons concentrations were analysed by Fourier Transform Infrared Spectroscopy after their extraction by sonication, and metal contents were determined by atomic absorption spectrometry. The results obtained showed that microbial communities had the potential to degrade petroleum hydrocarbons, with a maximum of 32 % degradation obtained for sandy sediments. Both crude oil and metals changed the microbial community structure, being the higher effect observed for Cu. Also, among the studied metals, only Cu displayed measurable deleterious effect on the hydrocarbons degradation process, as shown by a decrease in the hydrocarbon degrading microorganisms abundance and in the hydrocarbon degradation rates. Both degradation potential and metal influence varied with sediment characteristics probably due to differences in contaminant bioavailability, a feature that should be taken into account in developing bioremediation strategies for co-contaminated estuarine sites.

H51E-1535: Biogeochemical factors influencing the transport and fate of colloids and colloid-associated contaminants in the vadose zone

USDA-ARS?s Scientific Manuscript database

The vadose zone exhibits large spatial and temporal variability in many physical, chemical, and biological factors that strongly influence the transport and fate of colloids (e.g., microbes, nanoparticles, clays, and dissolved organic matter) and colloid-associated contaminants (e.g., heavy metals, ...

Phonological Awareness: Factors of Influence

ERIC Educational Resources Information Center

Frohlich, Linda Paulina; Petermann, Franz; Metz, Dorothee

2013-01-01

Early child development is influenced by various genetic and environmental factors. This study aims to identify factors that affect the phonological awareness of preschool and first grade children. Based on a sample of 330 German-speaking children (mean age = 6.2 years) the following domains were evaluated: Parent factors, birth and pregnancy,…

Comparison in waterborne Cu, Ni and Pb bioaccumulation kinetics between different gammarid species and populations: Natural variability and influence of metal exposure history.

PubMed

Urien, N; Farfarana, A; Uher, E; Fechner, L C; Chaumot, A; Geffard, O; Lebrun, J D

2017-12-01

Kinetic parameters (uptake from solution and elimination rate constants) of Cu, Ni and Pb bioaccumulation were determined from two Gammarus pulex and three Gammarus fossrum wild populations collected from reference sites throughout France in order to assess the inter-species and the natural inter-population variability of metal bioaccumulation kinetics in that sentinel organism. For that, each population was independently exposed for seven days to either 2.5μgL -1 Cu (39.3nM), 40μgL -1 Ni (681nM) or 10μgL -1 Pb (48.3nM) in laboratory controlled conditions, and then placed in unexposed microcosms for a 7-day depuration period. In the same way, the possible influence of metal exposure history on subsequent metal bioaccumulation kinetics was addressed by collecting wild gammarids from three populations inhabiting stations contaminated either by Cd, Pb or both Pb and Ni (named pre-exposed thereafter). In these pre-exposed organisms, assessment of any changes in metal bioaccumulation kinetics was achieved by comparison with the natural variability of kinetic parameters defined from reference populations. Results showed that in all studied populations (reference and pre-exposed) no significant Cu bioaccumulation was observed at the exposure concentration of 2.5μgL -1 . Concerning the reference populations, no significant differences in Ni and Pb bioaccumulation kinetics between the two species (G. pulex and G. fossarum) was observed allowing us to consider all the five reference populations to determine the inter-population natural variability, which was found to be relatively low (kinetic parameters determined for each population remained within a factor of 2 of the minimum and maximum values). Organisms from the population exhibiting a Pb exposure history presented reduced Ni uptake and elimination rate constants, whereas no influence on Ni kinetic parameters was observed in organisms from the population exhibiting an exposure history to both Ni and Pb. Furthermore

Characteristics of trace metals in traffic-derived particles in Hsuehshan Tunnel, Taiwan: size distribution, fingerprinting metal ratio, and emission factor

NASA Astrophysics Data System (ADS)

Lin, Y.-C.; Tsai, C.-J.; Wu, Y.-C.; Zhang, R.; Chi, K.-H.; Huang, Y.-T.; Lin, S.-H.; Hsu, S.-C.

2014-05-01

Traffic emissions are a significant source of airborne particulate matter (PM) in ambient environments. These emissions contain high abundance of toxic metals and thus pose adverse effects on human health. Size-fractionated aerosol samples were collected from May to September 2013 by using micro-orifice uniform deposited impactor (MOUDI). Sample collection was conducted simultaneously at the inlet and outlet sites of Hsuehshan Tunnel in northern Taiwan, which is the second longest freeway tunnel (12.9 km) in Asia. Such endeavor aims to characterize the chemical constituents, size distributions, and fingerprinting ratios, as well as the emission factors of particulate metals emitted by vehicle fleets. A total of 36 metals in size-resolved aerosols were determined through inductively coupled plasma mass spectrometry. Three major groups, namely, tailpipe emissions (Zn, Pb, and V), wear debris (Cu, Cd, Fe, Ga, Mn, Mo, Sb, and Sn), and resuspended dust (Ca, Mg, K, and Rb), of airborne PM metals were categorized on the basis of the results of enrichment factor, correlation matrix, and principal component analysis. Size distributions of wear-originated metals resembled the pattern of crustal elements, which were predominated by super-micron particulates (PM1-10). By contrast, tailpipe exhaust elements such as Zn, Pb, and V were distributed mainly in submicron particles. By employing Cu as a tracer of wear abrasion, several inter-metal ratios, including Fe/Cu (14), Ba/Cu (1.05), Sb/Cu (0.16), Sn/Cu (0.10), and Ga/Cu (0.03), served as fingerprints for wear debris. Emission factor of PM10 mass was estimated to be 7.7 mg vkm-1. The metal emissions were mostly predominated in super-micron particles (PM1-10). Finally, factors that possibly affect particulate metal emissions inside Hsuehshan Tunnel are discussed.

Metal release from stainless steel particles in vitro-influence of particle size.

PubMed

Midander, K; Pan, J; Wallinder, I Odnevall; Leygraf, C

2007-01-01

Human inhalation of airborne metallic particles is important for health risk assessment. To study interactions between metallic particles and the human body, metal release measurements of stainless steel powder particles were performed in two synthetic biological media simulating lung-like environments. Particle size and media strongly influence the metal release process. The release rate of Fe is enhanced compared with Cr and Ni. In artificial lysosomal fluid (ALF, pH 4.5), the accumulated amounts of released metal per particle loading increase drastically with decreasing particle size. The release rate of Fe per unit surface area increases with decreasing particle size. Compared with massive sheet metal, fine powder particles (<4 microm) show similar release rates of Cr and Ni, but a higher release rate of Fe. Release rates in Gamble's solution (pH 7.4), for all powders investigated, are significantly lower compared to ALF. No clear trend is seen related to particle size in Gamble's solution.

Heavy metals influence on ascorbic acid level

NASA Astrophysics Data System (ADS)

Kamaldinov, E. V.; Patrashkov, S. A.; Batenyeva, E. V.; Korotkevich, O. S.

2003-05-01

It is well known that heavy metals (HM) are extremely dangerous pollutants influencing to metabolism in animals' organisms. The vitamin C is one of the most important metabolites taking part in many biochemical processes. We studied the influence of main essential HM-Zn and Cu as well as the based supertoxical elements - Cd and Pd on ascorbic acid level in serum. The studies were carried out in Tulinskoe farm of Novosibirsk region. The objects of investigations were piglets (2 month after weaning) and 6-month pigs of Early Ripe Meat breed. The levels of HM in bristle were found by stripping voltammetric analysis using the TA-2 analyzer. Vitamin C content was determined by I.P. Kondrakhin (1985) method using 2,2-dipyridyl. The significant negative correlations between Pb, Cd content and vitamin C (-0.46 ± 0.18, -0.47 ± 0.19) in 6-month pigs were determined. The tendencies of negative correlation between all HM levels in hair and ascorbic acid level in plasma of piglets were revealed. Thus, the obtained correlations let us to suppose that all studied HM influence on 1-gulono-gamma-lactone oxidase and other vitamin C metabolism enzymes activity.

Influence of biogeochemical interactions on metal bioleaching performance in contaminated marine sediment.

PubMed

Fonti, Viviana; Dell'Anno, Antonio; Beolchini, Francesca

2013-09-15

Bioleaching strategies are still far from finding real applications in sediment clean-up, although metabolic mechanisms governing bioleaching processes have been deeply studied and can be considered well established. In this study, we carried out bioleaching experiments, using autotrophic and heterotrophic acidophilic bacteria strains, and worked with marine sediments characterized by different geochemical properties and metal concentrations and speciations. The solubilization efficiency of the metals was highly variable, with the highest for Zn (40%-76%) and the lowest for Pb (0%-7%). Our data suggest that the role of autotrophic Fe/S oxidizing bacteria is mainly associated with the production and re-cycling of leaching chemical species, mainly as protons and ferric ions. Metal solubilization appears to be more related to establishing environmental conditions that allow each metal or semimetal to remain stable in the solution phase. Thus, the maintenance of acid and oxidative conditions, the chemical behavior in aqueous environment of each metal species and the geochemical characteristics of sediment interact intimately to influence metal solubilization in site-specific and metal-specific way. Copyright © 2013 Elsevier Ltd. All rights reserved.

Influence of natural organic matter on the adsorption of metal ion onto clay particles

USGS Publications Warehouse

Schmitt, D.; Taylor, Howard E.; Aiken, G.R.; Roth, D.A.; Frimmel, F.H.

2002-01-01

The influence of natural organic matter (NOM) on the adsorption of Al, Fe, Zn, and Pb onto clay minerals was investigated. Adsorption experiments were carried out at pH = 5 and pH = 7 in the presence and absence of NOM. In general, the presence of NOM decreased the adsorption of metal ions onto the clay particles. Al and Fe were strongly influenced by NOM, whereas Zn and Pb adsorption was only slightly altered. The interaction of the metal ions with the minerals and the influence of NOM on this interaction was investigated by coupling SdFFF with an inductively coupled plasma mass spectrometer (ICPMS) or an inductively coupled plasma atomic emission spectrometer (ICPAES). Quantitative atomization of the clay particles in the ICP was confirmed by comparing elemental content determined by direct injection of the clay into the ICPMS with values from acid digestion. Particle sizes of the clays were found to be between 0.1 and 1 μm by sedimentation field-flow fractionation (SdFFF) with UV detection. Aggregation of particles due to metal adsorption was observed using SdFFF-ICPMS measurements. This aggregation was dependent on the specific metal ion and decreased in the presence of NOM and at higher pH value.

Biotherapeutic formulation factors affecting metal leachables from stainless steel studied by design of experiments.

PubMed

Zhou, Shuxia; Evans, Brad; Schöneich, Christian; Singh, Satish K

2012-03-01

Trace amounts of metals are inevitably present in biotherapeutic products. They can arise from various sources. The impact of common formulation factors such as protein concentration, antioxidant, metal chelator concentration and type, surfactant, pH, and contact time with stainless steel on metal leachables was investigated by a design of experiments approach. Three major metal leachables, iron, chromium, and nickel were monitored by inductively coupled plasma-mass spectrometry. It was observed that among all the tested factors, contact time, metal chelator concentration, and protein concentration were statistically significant factors with higher temperature resulting in higher levels of leached metals. Within a pH range of 5.5-6.5, solution pH played a minor role for chromium leaching at 25°C. No statistically significant difference was observed due to type of chelator, presence of antioxidant, or surfactant. In order to optimize a biotherapeutic formulation to achieve a target drug product shelf life with acceptable quality, each formulation component must be evaluated for its impact.

Factors that Influence Participation in Online Learning

ERIC Educational Resources Information Center

Vonderwell, Selma; Zachariah, Sajit

2005-01-01

This study explored what factors influenced learner participation in two sections of a graduate online course at a Midwestern university. Findings indicated that online learner participation and patterns of participation are influenced by the following factors: technology and interface characteristics, content area experience, student roles and…

Influence of voltage input to heavy metal removal from electroplating wastewater using electrocoagulation process

NASA Astrophysics Data System (ADS)

Wulan, D. R.; Cahyaningsih, S.; Djaenudin

2017-03-01

In medium capacity, electroplating industry usually treats wastewater until 5 m3 per day. Heavy metal content becomes concern that should be reduced. Previous studies performed electrocoagulation method on laboratory scale, either batch or continuous. This study was aimed to compare the influence of voltage input variation into heavy metal removal in electroplating wastewater treatment using electrocoagulation process on laboratory-scale in order to determine the optimum condition for scaling up the reactor into pilot-scale. The laboratory study was performed in 1.5 L glass reactor in batch system using wastewater from electroplating industry, the voltage input varied at 20, 30 and 40 volt. The electrode consisted of aluminium 32 cm2 as sacrifice anode and copper 32 cm2 as cathode. During 120 min electrocoagulation process, the pH value was measured using pH meter, whereas the heavy metal of chromium, copper, iron, and zinc concentration were analysed using Atomic Absorption Spectrophotometer (AAS). Result showed that removal of heavy metals from wastewater increased due to the increasing of voltage input. Different initial concentration of heavy metals on wastewater, resulted the different detention time. At pilot-scale reactor with 30 V voltage input, chromium, iron, and zinc reached removal efficiency until 89-98%, when copper reached 79% efficiency. At 40V, removal efficiencies increased on same detention time, i.e. chromium, iron, and zinc reached 89-99%, whereas copper reached 85%. These removal efficiencies have complied the government standard except for copper that had higher initial concentration in wastewater. Kinetic rate also calculated in this study as the basic factor for scaling up the process.

Genetic variation in metallothionein and metal-regulatory transcription factor 1 in relation to urinary cadmium, copper, and zinc

PubMed Central

Adams, Scott V.; Barrick, Brian; Freney, Emily P.; Shafer, Martin M.; Makar, Karen; Song, Xiaoling; Lampe, Johanna; Vilchis, Hugo; Ulery, April; Newcomb, Polly A.

2015-01-01

Background Metallothionein (MT) proteins play critical roles in the physiological handling of both essential (Cu and Zn) and toxic (Cd) metals. MT expression is regulated by metal-regulatory transcription factor 1 (MTF1). Hence, genetic variation in the MT gene family and MTF1 might therefore influence excretion of these metals. Methods 321 women were recruited in Seattle, WA and Las Cruces, NM and provided demographic information, urine samples for measurement of metal concentrations by mass spectrometry and creatinine, and blood or saliva for extraction of DNA. Forty-one single nucleotide polymorphisms (SNPs) within the MTF1 gene region and the region of chromosome 16 encoding the MT gene family were selected for genotyping in addition to an ancestry informative marker panel. Linear regression was used to estimate the association of SNPs with urinary Cd, Cu, and Zn, adjusted for age, urinary creatinine, smoking history, study site, and ancestry. Results Minor alleles of rs28366003 and rs10636 near the MT2A gene were associated with lower urinary Cd, Cu, and Zn. Minor alleles of rs8044719 and rs1599823, near MT1A and MT1B, were associated with lower urinary Cd and Zn, respectively. Minor alleles of rs4653329 in MTF1 was associated with lower urinary Cd. Conclusions These results suggest that genetic variation in the MT gene region and MTF1 influences urinary Cd, Cu, and Zn excretion. PMID:26529669

Influence of head size on the development of metallic wear and on the characteristics of carbon layers in metal-on-metal hip joints

PubMed Central

Sprecher, Christoph M; Wimmer, Markus A; Milz, Stefan; Taeger, Georg

2009-01-01

Background and purpose Particles originating from the articulating surfaces of hip endoprostheses often induce an inflammatory response, which can be related to implant failure. We therefore analyzed the metal content in capsular tissue from 44 McKee-Farrar metal-on-metal hip prostheses (with 3 different head sizes) and we also analyzed the morphological structure of layers located on articulating surfaces. Methods Atomic absorption spectrometry (AAS) was used to analyze the metal content in capsular tissue. Visually detectable carbon layers located on the articulating surfaces were evaluated using scanning electron microscopy (SEM), energy-dispersive Xray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). Results Metallic debris was detected in all capsular tissue samples but no statistically significant differences in metal content were found in relation to implant head size. The morphological characteristics of the different layer zones allowed an exact analysis of contact and non-contact areas. Furthermore, surface layers appear to have a protective function because they can prevent sharp-edged particles from damaging the prostheses surface. Interpretation The implant head size does not appear to influence the amount of metallic debris. The layers obviously act like a lubricating agent because the protection function does not occur in regions without layers where the metal surface often shows numerous scratches. As layers are not generated immediately after the implantation of hip prostheses, these findings may at least partially explain the high amount of wear early after implantation. PMID:19421914

Influence of metallic surface states on electron affinity of epitaxial AlN films

NASA Astrophysics Data System (ADS)

Mishra, Monu; Krishna, Shibin; Aggarwal, Neha; Gupta, Govind

2017-06-01

The present article investigates surface metallic states induced alteration in the electron affinity of epitaxial AlN films. AlN films grown by plasma-assisted molecular beam epitaxy system with (30% and 16%) and without metallic aluminium on the surface were probed via photoemission spectroscopic measurements. An in-depth analysis exploring the influence of metallic aluminium and native oxide on the electronic structure of the films is performed. It was observed that the metallic states pinned the Fermi Level (FL) near valence band edge and lead to the reduction of electron affinity (EA). These metallic states initiated charge transfer and induced changes in surface and interface dipoles strength. Therefore, the EA of the films varied between 0.6-1.0 eV due to the variation in contribution of metallic states and native oxide. However, the surface barrier height (SBH) increased (4.2-3.5 eV) adversely due to the availability of donor-like surface states in metallic aluminium rich films.

Genetic variation in metallothionein and metal-regulatory transcription factor 1 in relation to urinary cadmium, copper, and zinc

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, Scott V., E-mail: sadams@fhcrc.org; Barrick, Brian; Christopher, Emily P.

Background: Metallothionein (MT) proteins play critical roles in the physiological handling of both essential (Cu and Zn) and toxic (Cd) metals. MT expression is regulated by metal-regulatory transcription factor 1 (MTF1). Hence, genetic variation in the MT gene family and MTF1 might influence excretion of these metals. Methods: 321 women were recruited in Seattle, WA and Las Cruces, NM and provided demographic information, urine samples for measurement of metal concentrations by mass spectrometry and creatinine, and blood or saliva for extraction of DNA. Forty-one single nucleotide polymorphisms (SNPs) within the MTF1 gene region and the region of chromosome 16 encodingmore » the MT gene family were selected for genotyping in addition to an ancestry informative marker panel. Linear regression was used to estimate the association of SNPs with urinary Cd, Cu, and Zn, adjusted for age, urinary creatinine, smoking history, study site, and ancestry. Results: Minor alleles of rs28366003 and rs10636 near the MT2A gene were associated with lower urinary Cd, Cu, and Zn. Minor alleles of rs8044719 and rs1599823, near MT1A and MT1B, were associated with lower urinary Cd and Zn, respectively. Minor alleles of rs4653329 in MTF1 were associated with lower urinary Cd. Conclusions: These results suggest that genetic variation in the MT gene region and MTF1 influences urinary Cd, Cu, and Zn excretion. - Highlights: • Genetic variation in metallothionein (MT) genes was assessed in two diverse populations. • Single nucleotide polymorphisms (SNPs) in MT genes were associated with mean urinary Cd, Cu and Zn. • Genetic variation may influence biomarkers of exposure, and associations of exposure with health.« less

Factors That Influence Language Growth.

ERIC Educational Resources Information Center

McCarthy, Dorothea, Ed.; And Others

This booklet contains four articles that discuss factors influencing language growth. The first, "The Child's Equipment for Language Growth" by Charlotte Wells, examines what the child needs for language learning, how the child uses his equipment for language growth, and what school factors facilitate the child's use of his equipment for language…

Factors influencing phase compositions and structure of plasma sprayed hydroxyapatite coatings during heat treatment

NASA Astrophysics Data System (ADS)

Lu, Yu-Peng; Song, Yi-Zhong; Zhu, Rui-Fu; Li, Mu-Sen; Lei, Ting-Quan

2003-02-01

Heat treatment was expected to enhance the long-term reliability of hydroxyapatite (HA) coatings on metal substrates. In this study, factors influencing phase compositions and structure of plasma sprayed hydroxyapatite coatings during heat treatment were carefully analyzed. The phases were characterized by using X-ray diffraction (XRD), the OH - ion contents were determined by Fourier transform infrared (FTIR) spectroscopy. Of the involved factors, heating temperature is of more importance. The appropriate heat treatments is (600- 700 ° C)×2 h for coatings made from fine particles (10-20 μm) and 600 ° C×2 h for coatings made from coarse particles (50-80 μm). The excessive high temperatures and long holding times were unfavorable for the structural integrity of HA.

Factors influencing children's food choice.

PubMed

Koivisto Hursti, U K

1999-04-01

Although food habits are not stable and unchanging during a person's lifetime, a base for healthy food habits can be created in early childhood. Children's food habits can be assumed to be influenced by their parents' food habits and choices. The aim of this article is to review factors influencing food choice in children as well as in adults. The results demonstrate that the development of children's food habits is influenced by a multitude of factors. Parents play an important role in the formation of food habits and preferences of young children. They can influence their children's food choice by making specific foods available, by acting as models for their children and by their behaviour in specific situations. Children tend to be afraid of new foods and do not readily accept them. However, experience is known to enhance preference, and earlier experiences of a particular food are the major determinants of the development of children's food acceptance patterns. Thus, parents should be encouraged to make healthy foods easily available to the child and serve these foods in positive mealtime situations in order to help their child to develop healthy food habits.

Factors influencing children's food choice.

PubMed

Hursti, Ulla-Kaisa Koivisto

1999-01-01

Although food habits arc not stable and unchanging during a person's lifetime, a base for healthy food habits can be created in early childhood. Children's food habits can be assumed to be influenced by their parents' food habits and choices. The aim of this article is to review factors influencing food choice in children as well as in adults. The results demonstrate that the development of children's food habits is influenced by a multitude of factors. Parents play an important role in the formation of food habits and preferences of young children. They can influence their children's food choice by making specific foods available, by acting as models for their children and by their behaviour in specific situations. Children tend to be afraid of new foods and do not readily accept them. However, experience is known to enhance preference, and earlier experiences of a particular food are the major determinants of the development of children's food acceptance patterns. Thus, parents should be encouraged to make healthy foods easily available to the child and serve these foods in positive mealtime situations in order to help their child to develop healthy food habits.

Tribology and wear of metal-on-metal hip prostheses: influence of cup angle and head position.

PubMed

Williams, Sophie; Leslie, Ian; Isaac, Graham; Jin, Zhongmin; Ingham, Eileen; Fisher, John

2008-08-01

Clinical studies have indicated that the angular position of the acetabular cup may influence wear in metal-on-metal total hip bearings. A high cup angle in comparison to the anatomical position may lead to the head being constrained by the superior lateral surface and rim of the cup, thus potentially changing the location of the contact zone between the head and the cup. The aim of this study was to test the hypothesis that both a steep cup angle and a lateralized position of the head can increase head contact on the superior rim of the cup, with the consequence of increased wear. Hip-joint simulator studies of metal-on-metal bearings were undertaken with cup angles of 45 degrees and 55 degrees . The femoral head was either aligned to the center of the cup or placed in a position of microlateralization. Wear was measured gravimetrically over 5 million cycles. A steep cup angle of 55 degrees showed significantly higher long-term steady-state wear than a standard cup angle of 45 degrees (p < 0.01). The difference was fivefold. Microlateralization of the head resulted in a fivefold increase in steady-state wear compared with a centralized head. The combination of a steep cup angle and a microlateralized head increased the steady-state wear rate by tenfold compared with a standard cup angle with a centralized head. These studies support the hypothesis that both an increased cup angle and a lateral head position increase wear in metal-on-metal hip prostheses.

Influence of Silicate Melt Composition on Metal/Silicate Partitioning of W, Ge, Ga and Ni

NASA Technical Reports Server (NTRS)

Singletary, S. J.; Domanik, K.; Drake, M. J.

2005-01-01

The depletion of the siderophile elements in the Earth's upper mantle relative to the chondritic meteorites is a geochemical imprint of core segregation. Therefore, metal/silicate partition coefficients (Dm/s) for siderophile elements are essential to investigations of core formation when used in conjunction with the pattern of elemental abundances in the Earth's mantle. The partitioning of siderophile elements is controlled by temperature, pressure, oxygen fugacity, and by the compositions of the metal and silicate phases. Several recent studies have shown the importance of silicate melt composition on the partitioning of siderophile elements between silicate and metallic liquids. It has been demonstrated that many elements display increased solubility in less polymerized (mafic) melts. However, the importance of silicate melt composition was believed to be minor compared to the influence of oxygen fugacity until studies showed that melt composition is an important factor at high pressures and temperatures. It was found that melt composition is also important for partitioning of high valency siderophile elements. Atmospheric experiments were conducted, varying only silicate melt composition, to assess the importance of silicate melt composition for the partitioning of W, Co and Ga and found that the valence of the dissolving species plays an important role in determining the effect of composition on solubility. In this study, we extend the data set to higher pressures and investigate the role of silicate melt composition on the partitioning of the siderophile elements W, Ge, Ga and Ni between metallic and silicate liquid.

Influence of the clearance on in-vitro tribology of large diameter metal-on-metal articulations pertaining to resurfacing hip implants.

PubMed

Rieker, Claude B; Schön, Rolf; Konrad, Reto; Liebentritt, Gernot; Gnepf, Patric; Shen, Ming; Roberts, Paul; Grigoris, Peter

2005-04-01

Large-diameter metal-on-metal articulations may provide an opportunity for wear reduction in total hip implants because earlier studies have shown that the formation of a fluid film that completely separates the bearing surfaces is theoretically possible. In such a lubrication mode and under ideal conditions, there is theoretically no amount of wear. Studies have suggested that the two primary parameters controlling the lubrication mode are the diameter and the clearance of the articulation. The goal of the present study was to experimentally investigate the influence of these two parameters on the wear behavior of large-diameter metal-on-metal articulations pertaining to resurfacing hip implants. The results of this in vitro investigation showed that longer running-in periods and higher amounts of running-in wear were associated with larger clearances.

Biosorption Of Heavy Metals From Mining Influenced Water Onto Chitin Products

EPA Science Inventory

Mining influenced water (MIW) emanating from mine sites poses a major environmental concern due to its impact on water contamination caused by low pH and the presence of high concentrations of toxic metals. Chitorem SC-20^® (raw crushed crab shells containing 40% w/w C...

Influence of Organic Matter - Mineral Interfacial Reactions on Metal(loid) Speciation and Bioaccessibility

NASA Astrophysics Data System (ADS)

Chorover, J.; Kong, S.; Root, R. A.; Thomas, A.

2015-12-01

Bioaccessibility of contaminant metals in geomedia is often measured on the basis of kinetic release to solution during in vitro reaction with biofluid simulants. We postulate that development of a predictive-mechanistic understanding of bioaccessibility requires knowledge of metal(loid) molecular speciation upon sample introduction, as well as its change over the course of the in vitro reaction. Our results - including data from batch, column, mesocosm and field studies pertaining to arsenic, lead, and zinc contaminated materials - indicate the strong influence of organic matter and associated biological activity on metal(loid) speciation in mine tailings and related model systems. Furthermore, presence/absence of organic matter during bioassays affects the kinetics of metal(loid) release into biofluid simulants through multiple mechanisms.

Trace metals, melanin-based pigmentation and their interaction influence immune parameters in feral pigeons (Columba livia).

PubMed

Chatelain, M; Gasparini, J; Frantz, A

2016-04-01

Understanding the effects of trace metals emitted by anthropogenic activities on wildlife is of great concern in urban ecology; yet, information on how they affect individuals, populations, communities and ecosystems remains scarce. In particular, trace metals may impact survival by altering the immune system response to parasites. Plumage melanin is assumed to influence the effects of trace metals on immunity owing to its ability to bind metal ions in feathers and its synthesis being coded by a pleiotropic gene. We thus hypothesized that trace metal exposure would interact with plumage colouration in shaping immune response. We experimentally investigated the interactive effect between exposure to an environmentally relevant range of zinc and/or lead and melanin-based plumage colouration on components of the immune system in feral pigeons (Columba livia). We found that zinc increased anti-keyhole limpet hemocyanin (KLH) IgY primary response maintenance, buffered the negative effect of lead on anti-KLH IgY secondary response maintenance and tended to increase T-cell mediated phytohaemagglutinin (PHA) skin response. Lead decreased the peak of the anti-KLH IgY secondary response. In addition, pheomelanic pigeons exhibited a higher secondary anti-KLH IgY response than did eumelanic ones. Finally, T-cell mediated PHA skin response decreased with increasing plumage eumelanin level of birds exposed to lead. Neither treatments nor plumage colouration correlated with endoparasite intensity. Overall, our study points out the effects of trace metals on some parameters of birds' immunity, independently from other confounding urbanization factors, and underlines the need to investigate their impacts on other life history traits and their consequences in the ecology and evolution of host-parasite interactions.

Influence of part orientation on the geometric accuracy in robot-based incremental sheet metal forming

NASA Astrophysics Data System (ADS)

Störkle, Denis Daniel; Seim, Patrick; Thyssen, Lars; Kuhlenkötter, Bernd

2016-10-01

This article describes new developments in an incremental, robot-based sheet metal forming process (`Roboforming') for the production of sheet metal components for small lot sizes and prototypes. The dieless kinematic-based generation of the shape is implemented by means of two industrial robots, which are interconnected to a cooperating robot system. Compared to other incremental sheet metal forming (ISF) machines, this system offers high geometrical form flexibility without the need of any part-dependent tools. The industrial application of ISF is still limited by certain constraints, e.g. the low geometrical accuracy. Responding to these constraints, the authors present the influence of the part orientation and the forming sequence on the geometric accuracy. Their influence is illustrated with the help of various experimental results shown and interpreted within this article.

Influencing factors on particle-bound contaminant transport in the Elbe estuary

NASA Astrophysics Data System (ADS)

Kleisinger, Carmen; Haase, Holger; Schubert, Birgit

2016-04-01

Particulate matter, i.e. suspended particulate matter and sediments in rivers and estuaries, often are contaminated with trace metals and selected organic contaminants and are mainly associated with fine-grained fractions. Transport processes and fate of particles in estuaries are influenced by several factors, e.g. freshwater discharge, tide, flow velocity and dredging activities (Kappenberg et al., 2007). Understanding the transport processes in estuaries may help to achieve the objectives of the Water Framework Directive and the Marine Strategy Framework Directive. The German Federal Institute of Hydrology (BfG) operates for more than 20 years five monitoring sites in the Elbe estuary in order to monitor the development of particle-bound contaminant concentrations over time and to understand their transport mechanisms. Results of the monitoring revealed freshwater discharge as an important influencing factor on the transport of contaminated particulate matter (Ackermann et al., 2007). The bidirectional transport of marine and fluvial water and particulate matter in estuaries results in a turbidity zone where large amounts of particulate matter are temporarily retained and thus in a delayed transport of particulate matter towards the sea. The extent and the location of the turbidity zone as well as the ratio of highly contaminated fluvial and less contaminated marine sediments at a given location are mainly influenced by the freshwater discharge (Kowalewska et al., 2011). Furthermore, at high freshwater discharge conditions the highly contaminated particulate matter from fluvial origin are transported downstream the estuary, whereas at low freshwater discharges, upstream transport of less contaminated marine sediments prevails. Hence, residence times of particulate matter in the estuary are difficult to estimate. Furthermore, sedimentation areas with flow reduced conditions, e.g. wadden areas or branches of the Elbe estuary, may act as sinks for particle bound

Factors Influencing Effective Writing.

ERIC Educational Resources Information Center

Muccino, Mary Ann; And Others

Focusing on procedures and strategies suitable for teaching writing to students in grades 4, 6, and 8, this paper examines the factors that have been shown through research to influence effective writing. The paper divides the research examined into the categories of metacognition; socially-based writing strategies; theory-tested approaches to…

Influence of geogenic factors on microbial communities in metallogenic Australian soils

PubMed Central

Reith, Frank; Brugger, Joel; Zammit, Carla M; Gregg, Adrienne L; Goldfarb, Katherine C; Andersen, Gary L; DeSantis, Todd Z; Piceno, Yvette M; Brodie, Eoin L; Lu, Zhenmei; He, Zhili; Zhou, Jizhong; Wakelin, Steven A

2012-01-01

Links between microbial community assemblages and geogenic factors were assessed in 187 soil samples collected from four metal-rich provinces across Australia. Field-fresh soils and soils incubated with soluble Au(III) complexes were analysed using three-domain multiplex-terminal restriction fragment length polymorphism, and phylogenetic (PhyloChip) and functional (GeoChip) microarrays. Geogenic factors of soils were determined using lithological-, geomorphological- and soil-mapping combined with analyses of 51 geochemical parameters. Microbial communities differed significantly between landforms, soil horizons, lithologies and also with the occurrence of underlying Au deposits. The strongest responses to these factors, and to amendment with soluble Au(III) complexes, was observed in bacterial communities. PhyloChip analyses revealed a greater abundance and diversity of Alphaproteobacteria (especially Sphingomonas spp.), and Firmicutes (Bacillus spp.) in Au-containing and Au(III)-amended soils. Analyses of potential function (GeoChip) revealed higher abundances of metal-resistance genes in metal-rich soils. For example, genes that hybridised with metal-resistance genes copA, chrA and czcA of a prevalent aurophillic bacterium, Cupriavidus metallidurans CH34, occurred only in auriferous soils. These data help establish key links between geogenic factors and the phylogeny and function within soil microbial communities. In particular, the landform, which is a crucial factor in determining soil geochemistry, strongly affected microbial community structures. PMID:22673626

Influence of geogenic factors on microbial communities in metallogenic Australian soils.

PubMed

Reith, Frank; Brugger, Joel; Zammit, Carla M; Gregg, Adrienne L; Goldfarb, Katherine C; Andersen, Gary L; DeSantis, Todd Z; Piceno, Yvette M; Brodie, Eoin L; Lu, Zhenmei; He, Zhili; Zhou, Jizhong; Wakelin, Steven A

2012-11-01

Links between microbial community assemblages and geogenic factors were assessed in 187 soil samples collected from four metal-rich provinces across Australia. Field-fresh soils and soils incubated with soluble Au(III) complexes were analysed using three-domain multiplex-terminal restriction fragment length polymorphism, and phylogenetic (PhyloChip) and functional (GeoChip) microarrays. Geogenic factors of soils were determined using lithological-, geomorphological- and soil-mapping combined with analyses of 51 geochemical parameters. Microbial communities differed significantly between landforms, soil horizons, lithologies and also with the occurrence of underlying Au deposits. The strongest responses to these factors, and to amendment with soluble Au(III) complexes, was observed in bacterial communities. PhyloChip analyses revealed a greater abundance and diversity of Alphaproteobacteria (especially Sphingomonas spp.), and Firmicutes (Bacillus spp.) in Au-containing and Au(III)-amended soils. Analyses of potential function (GeoChip) revealed higher abundances of metal-resistance genes in metal-rich soils. For example, genes that hybridised with metal-resistance genes copA, chrA and czcA of a prevalent aurophillic bacterium, Cupriavidus metallidurans CH34, occurred only in auriferous soils. These data help establish key links between geogenic factors and the phylogeny and function within soil microbial communities. In particular, the landform, which is a crucial factor in determining soil geochemistry, strongly affected microbial community structures.

Influence of emissivity on behavior of metallic dust particles in plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanaka, Y.; Smirnov, R. D.; Pigarov, A. Yu.

Influence of thermal radiation emissivity on the lifetime of a dust particle in plasmas is investigated for different fusion relevant metals (Li, Be, Mo, and W). The thermal radiation is one of main cooling mechanisms of the dust in plasmas especially for dust with evaporation temperature higher than 2500 K. In this paper, the temperature- and radius-dependent emissivity of dust particles is calculated using Mie theory and temperature-dependent optical constants for the above metallic materials. The lifetime of a dust particle in uniform plasmas is estimated with the calculated emissivity using the dust transport code DUSTT[A. Pigarov et al., Physicsmore » of Plasmas 12, 122508 (2005)], considering other dust cooling and destruction processes such as physical and chemical sputtering, melting and evaporation, electron emission etc. The use of temperature-dependent emissivity calculated with Mie theory provides a longer lifetime of the refractory metal dust particle compared with that obtained using conventional emissivity constants in the literature. The dynamics of heavy metal dust particles are also presented using the calculated emissivity in a tokamak plasma.« less

Influence of metal ions on flavonoid protection against asbestos-induced cell injury.

PubMed

Kostyuk, V A; Potapovich, A I; Vladykovskaya, E N; Korkina, L G; Afanas'ev, I B

2001-01-01

Influence of metal ions (Fe2+, Fe3+, Cu2+, Zn2+) on the protective effect of rutin, dihydroquercetin, and green tea epicatechins against in vitro asbestos-induced cell injury was studied. Metals have been found to increase the capacity of rutin and dihydroquercetin to protect peritoneal macrophages against chrysotile asbestos-induced injury. The data presented here show that this effect is due to the formation of flavonoid metal complexes, which turned out to be more effective radical scavengers than uncomplexed flavonoids. At the same time epicatechins and their metal complexes have similar antiradical properties and protective capacities against the asbestos induced injury of macrophages. Metal complexes of all flavonoids were found to be considerably more potent than parent flavonoids in protecting red blood cells against asbestos-induced injury. It was also found that the metal complexes of all flavonoids were absorbed by chrysotile asbestos fibers considerably better than uncomplexed compounds and probably for this reason flavonoid metal complexes have better protective properties against asbestos induced hemolysis. Thus, the results of the present study show that flavonoid metal complexes may be effective therapy for the inflammatory response associated with the inhalation of asbestos fiber. The advantage of their application could be the strong increase in ROS scavenging by flavonoids and finally a better cell protection under the conditions of cellular oxidative stress.

Factors influencing perceived angular velocity.

PubMed

Kaiser, M K; Calderone, J B

1991-11-01

The assumption that humans are able to perceive and process angular kinematics is critical to many structure-from-motion and optical flow models. The current studies investigate this sensitivity, and examine several factors likely to influence angular velocity perception. In particular, three factors are considered: (1) the extent to which perceived angular velocity is determined by edge transitions of surface elements, (2) the extent to which angular velocity estimates are influenced by instantaneous linear velocities of surface elements, and (3) whether element-velocity effects are related to three-dimensional (3-D) tangential velocities or to two-dimensional (2-D) image velocities. Edge-transition rate biased angular velocity estimates only when edges were highly salient. Element velocities influenced perceived angular velocity; this bias was related to 2-D image velocity rather than 3-D tangential velocity. Despite these biases, however, judgments were most strongly determined by the true angular velocity. Sensitivity to this higher order motion parameter was surprisingly good, for rotations both in depth (y-axis) and parallel to the line of sight (z-axis).

Influence of reactive gas admixture on transition metal cluster nucleation in a gas aggregation cluster source

NASA Astrophysics Data System (ADS)

Peter, Tilo; Polonskyi, Oleksandr; Gojdka, Björn; Mohammad Ahadi, Amir; Strunskus, Thomas; Zaporojtchenko, Vladimir; Biederman, Hynek; Faupel, Franz

2012-12-01

We quantitatively assessed the influence of reactive gases on the formation processes of transition metal clusters in a gas aggregation cluster source. A cluster source based on a 2 in. magnetron is used to study the production rate of titanium and cobalt clusters. Argon served as working gas for the DC magnetron discharge, and a small amount of reactive gas (oxygen and nitrogen) is added to promote reactive cluster formation. We found that the cluster production rate depends strongly on the reactive gas concentration for very small amounts of reactive gas (less than 0.1% of total working gas), and no cluster formation takes place in the absence of reactive species. The influence of discharge power, reactive gas concentration, and working gas pressure are investigated using a quartz micro balance in a time resolved manner. The strong influence of reactive gas is explained by a more efficient formation of nucleation seeds for metal-oxide or nitride than for pure metal.

EFFECT OF SOIL MODIFYING FACTORS ON THE BIOAVAILABILITY AND TOXICITY OF METAL CONTAMINATED SOILS

EPA Science Inventory

Heavy metal and organic chemical contamination of soils is a worldwide problem posing a risk to humans and more directly, soil organisms. Metal toxicity is often not directly related to the total concentration of metals present due to a number of modifying factors that depend,...

Social Factors Influencing Child Health in Ghana

PubMed Central

Quansah, Emmanuel; Ohene, Lilian Akorfa; Norman, Linda; Mireku, Michael Osei; Karikari, Thomas K.

2016-01-01

Objectives Social factors have profound effects on health. Children are especially vulnerable to social influences, particularly in their early years. Adverse social exposures in childhood can lead to chronic disorders later in life. Here, we sought to identify and evaluate the impact of social factors on child health in Ghana. As Ghana is unlikely to achieve the Millennium Development Goals’ target of reducing child mortality by two-thirds between 1990 and 2015, we deemed it necessary to identify social determinants that might have contributed to the non-realisation of this goal. Methods ScienceDirect, PubMed, MEDLINE via EBSCO and Google Scholar were searched for published articles reporting on the influence of social factors on child health in Ghana. After screening the 98 articles identified, 34 of them that met our inclusion criteria were selected for qualitative review. Results Major social factors influencing child health in the country include maternal education, rural-urban disparities (place of residence), family income (wealth/poverty) and high dependency (multiparousity). These factors are associated with child mortality, nutritional status of children, completion of immunisation programmes, health-seeking behaviour and hygiene practices. Conclusions Several social factors influence child health outcomes in Ghana. Developing more effective responses to these social determinants would require sustainable efforts from all stakeholders including the Government, healthcare providers and families. We recommend the development of interventions that would support families through direct social support initiatives aimed at alleviating poverty and inequality, and indirect approaches targeted at eliminating the dependence of poor health outcomes on social factors. Importantly, the expansion of quality free education interventions to improve would-be-mother’s health knowledge is emphasised. PMID:26745277

Social Factors Influencing Child Health in Ghana.

PubMed

Quansah, Emmanuel; Ohene, Lilian Akorfa; Norman, Linda; Mireku, Michael Osei; Karikari, Thomas K

2016-01-01

Social factors have profound effects on health. Children are especially vulnerable to social influences, particularly in their early years. Adverse social exposures in childhood can lead to chronic disorders later in life. Here, we sought to identify and evaluate the impact of social factors on child health in Ghana. As Ghana is unlikely to achieve the Millennium Development Goals' target of reducing child mortality by two-thirds between 1990 and 2015, we deemed it necessary to identify social determinants that might have contributed to the non-realisation of this goal. ScienceDirect, PubMed, MEDLINE via EBSCO and Google Scholar were searched for published articles reporting on the influence of social factors on child health in Ghana. After screening the 98 articles identified, 34 of them that met our inclusion criteria were selected for qualitative review. Major social factors influencing child health in the country include maternal education, rural-urban disparities (place of residence), family income (wealth/poverty) and high dependency (multiparousity). These factors are associated with child mortality, nutritional status of children, completion of immunisation programmes, health-seeking behaviour and hygiene practices. Several social factors influence child health outcomes in Ghana. Developing more effective responses to these social determinants would require sustainable efforts from all stakeholders including the Government, healthcare providers and families. We recommend the development of interventions that would support families through direct social support initiatives aimed at alleviating poverty and inequality, and indirect approaches targeted at eliminating the dependence of poor health outcomes on social factors. Importantly, the expansion of quality free education interventions to improve would-be-mother's health knowledge is emphasised.

Factors potentially influencing aminoglycoside use and expenditure

DOE Office of Scientific and Technical Information (OSTI.GOV)

DiPiro, J.T.; Kilsdonk, G.F.; Amerson, A.B.

1982-07-01

Factors that may have influenced aminoglycoside use and expenditure in one hospital were examined. Factors that were evaluated as to their influence on aminoglycoside-use patterns were: (1) formulary status; (2) bacterial susceptibility patterns; (3) identified or perceived differences in toxicity; (4) changes in patient population; (5) price paid by the hospital for aminoglycosides; (6) distribution of newsletters or memoranda; (7) advertising and detailing; and (8) pharmacy policies. For FY 1976-77 to 1979-80, the largest proportion of aminoglycoside expense was for gentamicin. During FY 1980-81, the expenditure for gentamicin decreased and tobramycin accounted for the largest proportion of total expenditure. Monthlymore » gentamicin use decreased 20% during FY 1980-81 from the previous year. Tobramycin use increased from January 1979 to November 1980 and decreased from December 1980 to June 1981. Kanamycin use and amikacin use were fairly constant during the study period. Based on temporal relationships, the following factors appeared to influence aminoglycoside use and expenditure: (1) a study conducted at the institution from June 1977 to June 1979 comparing gentamicin and tobramycin nephrotoxicity; (2) a comparative nephrotoxicity study published in a widely circulated medical journal in May 1980; and (3) an intramural newsletter and memorandum distributed in March 1981 encouraging selective aminoglycoside use. The identification of factors that potentially influenced aminoglycoside use can be used to anticipate the future impact of similar events and to devise strategies to influence antimicrobial use.« less

Analysis of factors influencing the bond strength in roll bonding processes

NASA Astrophysics Data System (ADS)

Khaledi, Kavan; Wulfinghoff, Stephan; Reese, Stefanie

2018-05-01

Cold Roll Bonding (CRB) is recognized as an industrial technique in which the metal sheets are joined together in order to produce laminate metal composites. In this technique, a metallurgical bond resulting from severe plastic deformation is formed between the rolled metallic layers. The main objective of this paper is to analyse different factors which may affect the bond formation in rolling processes. To achieve this goal, first, an interface model is employed which describes both the bonding and debonding. In this model, the bond strength evolution between the metallic layers is calculated based on the film theory of bonding. On the other hand, the debonding process is modelled by means of a bilinear cohesive zone model. In the numerical section, different scenarios are taken into account to model the roll bonding process of metal sheets. The numerical simulation includes the modelling of joining during the roll bonding process followed by debonding in a Double Cantilever Beam (DCB) peeling test. In all simulations, the metallic layers are regarded as elastoplastic materials subjected to large plastic deformations. Finally, the effects of some important factors on the bond formation are numerically investigated.

Factors influencing the life cycle burdens of the recovery of energy from residual municipal waste.

PubMed

Burnley, Stephen; Coleman, Terry; Peirce, Adam

2015-05-01

A life cycle assessment was carried out to assess a selection of the factors influencing the environmental impacts and benefits of incinerating the fraction of municipal waste remaining after source-separation for reuse, recycling, composting or anaerobic digestion. The factors investigated were the extent of any metal and aggregate recovery from the bottom ash, the thermal efficiency of the process, and the conventional fuel for electricity generation displaced by the power generated. The results demonstrate that incineration has significant advantages over landfill with lower impacts from climate change, resource depletion, acidification, eutrophication human toxicity and aquatic ecotoxicity. To maximise the benefits of energy recovery, metals, particularly aluminium, should be reclaimed from the residual bottom ash and the energy recovery stage of the process should be as efficient as possible. The overall environmental benefits/burdens of energy from waste also strongly depend on the source of the power displaced by the energy from waste, with coal giving the greatest benefits and combined cycle turbines fuelled by natural gas the lowest of those considered. Regardless of the conventional power displaced incineration presents a lower environmental burden than landfill. Copyright © 2015 Elsevier Ltd. All rights reserved.

Influence of organizational factors on safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haber, S.B.; Metlay, D.S.; Crouch, D.A.

There is a need for a better understanding of exactly how organizational management factors at a nuclear power plant (NPP) affect plant safety performance, either directly or indirectly, and how these factors might be observed, measured, and evaluated. The purpose of this research project is to respond to that need by developing a general methodology for characterizing these organizational and management factors, systematically collecting information on their status and integrating that information into various types of evaluative activities. Research to date has included the development of the Nuclear Organization and Management Analysis Concept (NOMAC) of a NPP, the identification ofmore » key organizational and management factors, and the identification of the methods for systematically measuring and analyzing the influence of these factors on performance. Most recently, two field studies, one at a fossil fuel plant and the other at a NPP, were conducted using the developed methodology. Results are presented from both studies highlighting the acceptability, practicality, and usefulness of the methods used to assess the influence of various organizational and management factors including culture, communication, decision-making, standardization, and oversight. 6 refs., 3 figs., 1 tab.« less

Factors Influencing Resident Choice of Prosthodontic Residency Program.

PubMed

Wojnarwsky, Pandora Keala Lee; Wang, Yan; Shah, Kumar; Koka, Sreenivas

2017-06-01

The decision by prosthodontic residency program directors to employ the Match process highlights the need to understand applicant priorities that influence their choice of which programs to rank highly. The purpose of this study is to determine the factors that were most important to residents when choosing from among nonmilitary based prosthodontics dental residency programs in the United States. Following completion of a pilot study, all currently enrolled prosthodontic residents at nonmilitary residency programs were invited to participate via the internet. The study consisted of a survey instrument asking residents to rank 26 possible factors that might impact an applicant's choice of residency program. In addition, the instrument collected other possible influencing variables including gender and debt load. Mean rank scores were compared to determine the most and least important factors. Kruskal-Wallis test was used to compare specific factors between the possible influencing variables. Two hundred and thirty residents completed the survey instrument, representing a 54.1% response rate of possible participants. With regard to factors influencing program choice, reputation of the residency program was the factor ranked the highest by participants, followed in descending order by the program director's personality, curriculum content, access to use of the latest digital technology, and opportunities for dental implant placement. Quality of schools for children, community outreach opportunities, and the ability to moonlight were ranked as the least important factors. Male and female residents ranked factors such as tuition/stipend, curriculum content, and community outreach opportunities significantly differently. Depending on debt load, residents ranked the factors tuition/stipend, ability to moonlight, curriculum content, and safety of the area where the program is differently. Current prosthodontic residents valued the reputation of the program as the most

[Levels of awareness of occupational and general cardiovascular risk factors among metal industry employees].

PubMed

Gürdoğan, Muhammet; Paslı Gürdoğan, Eylem; Arı, Hasan; Ertürk, Mehmet; Genç, Ahmet; Uçar, Mehmet Fatih

2015-06-01

Long-term exposure to physical, chemical, ergonomic and psychosocial environmental factors may lead to occupational cardiovascular disease in metal industry employees. This study aimed to determine levels of knowledge levels regarding occupational and cardiovascular risk factors among metal industry employees. The study was conducted between 2nd and 6th June 2014 with the participation of 82 employees. All were working in a medium-sized workplace in the metal industry. Data were collected by means of a questionnaire, which included socio-demographic characteristics and occupational cardiovascular risk factors, and a scale developed by Arıkan et al. to measure awareness levels of risk factors for cardiovascular diseases (CARRF-KL). The mean age of employees was 39.97±8.44. Of the participants, 58.5% stated that they had knowledge on cardiac disease risk factors. The mean CARRF-KL score was found to be 18.65±4.04. The percentage of employees stating that they had no knowledge on the occupational risks for such diseases was 79.3%, while 19.5% stated that job stress caused cardiac diseases. One individual (1.2%) stated that one of the chemical solvents used in the working environment was a risk factor. Although awareness among metal industry employees of cardiovascular risk factors was above average, it was determined that they do not have adequate information on occupational risk factors. Prolonged and unprotected levels exposure to environmental factors constitute a risk for cardiovascular disease. This information is important for the development of preventive cardiology.

Climate change driven plant-metal-microbe interactions.

PubMed

Rajkumar, Mani; Prasad, Majeti Narasimha Vara; Swaminathan, Sandhya; Freitas, Helena

2013-03-01

Various biotic and abiotic stress factors affect the growth and productivity of crop plants. Particularly, the climatic and/or heavy metal stress influence various processes including growth, physiology, biochemistry, and yield of crops. Climatic changes particularly the elevated atmospheric CO₂ enhance the biomass production and metal accumulation in plants and help plants to support greater microbial populations and/or protect the microorganisms against the impacts of heavy metals. Besides, the indirect effects of climatic change (e.g., changes in the function and structure of plant roots and diversity and activity of rhizosphere microbes) would lead to altered metal bioavailability in soils and concomitantly affect plant growth. However, the effects of warming, drought or combined climatic stress on plant growth and metal accumulation vary substantially across physico-chemico-biological properties of the environment (e.g., soil pH, heavy metal type and its bio-available concentrations, microbial diversity, and interactive effects of climatic factors) and plant used. Overall, direct and/or indirect effects of climate change on heavy metal mobility in soils may further hinder the ability of plants to adapt and make them more susceptible to stress. Here, we review and discuss how the climatic parameters including atmospheric CO₂, temperature and drought influence the plant-metal interaction in polluted soils. Other aspects including the effects of climate change and heavy metals on plant-microbe interaction, heavy metal phytoremediation and safety of food and feed are also discussed. This review shows that predicting how plant-metal interaction responds to altering climatic change is critical to select suitable crop plants that would be able to produce more yields and tolerate multi-stress conditions without accumulating toxic heavy metals for future food security. Copyright © 2012 Elsevier Ltd. All rights reserved.

Influence of metallic vapours on thermodynamic and transport properties of two-temperature air plasma

NASA Astrophysics Data System (ADS)

Zhong, Linlin; Wang, Xiaohua; Cressault, Yann; Teulet, Philippe; Rong, Mingzhe

2016-09-01

The metallic vapours (i.e., copper, iron, and silver in this paper) resulting from walls and/or electrode surfaces can significantly affect the characteristics of air plasma. Different from the previous works assuming local thermodynamic equilibrium, this paper investigates the influence of metallic vapours on two-temperature (2 T) air plasma. The 2 T compositions of air contaminated by Cu, Fe, and Ag are first determined based on Saha's and Guldberg-Waage's laws. The thermodynamic properties (including mass density, specific enthalpy, and specific heat) are then calculated according to their definitions. After determining the collision integrals for each pair of species in air-metal mixtures using the newly published methods and source data, the transport coefficients (including electrical conductivity, viscosity, and thermal conductivity) are calculated for air-Cu, air-Fe, and air-Ag plasmas with different non-equilibrium degree θ (Te/Th). The influences of metallic contamination as well as non-equilibrium degree are discussed. It is found that copper, iron, and silver exist mainly in the form of Cu2, FeO, and AgO at low temperatures. Generally, the metallic vapours increase mass density at most temperatures, reduce the specific enthalpy and specific heat in the whole temperature range, and affect the transport properties remarkably from 5000 K to 20 000 K. The effect arising from the type of metals is little except for silver at certain temperatures. Besides, the departure from thermal equilibrium results in the delay of dissociation and ionization reactions, leading to the shift of thermodynamic and transport properties towards a higher temperature.

Influence of process conditions and interventions on metals content in biocrude from hydrothermal liquefaction of microalgae

DOE PAGES

Jiang, Jimeng; Savage, Phillip E.

2017-07-15

We determined how different reaction conditions influence the metals contents in biocrude oil and other product fractions from hydrothermal liquefaction (HTL) of microalgae. We then assessed the effect of using different solvents for biocrude recovery and adding catalysts on the metal content in the biocrude. The Fe content was lower and the Na content higher in biocrude produced at higher temperature (400 vs 350 °C) and longer holding time (60 vs 3 min). The Fe and Na contents were reduced over 50% and 95%, respectively, by use of methyl tert-butyl ether (MTBE ) rather than dichloromethane as the organic solventmore » for biocrude recovery and they were reduced over 98% via additional application of a supported Ni catalyst during HTL. Finally, this work demonstrates that the hydrothermal treatment conditions influence the metal content in biocrude and that judicious selection of solvent and catalyst can lead to significant reduction in the metal content in biocrude.« less

Influence of process conditions and interventions on metals content in biocrude from hydrothermal liquefaction of microalgae

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Jimeng; Savage, Phillip E.

We determined how different reaction conditions influence the metals contents in biocrude oil and other product fractions from hydrothermal liquefaction (HTL) of microalgae. We then assessed the effect of using different solvents for biocrude recovery and adding catalysts on the metal content in the biocrude. The Fe content was lower and the Na content higher in biocrude produced at higher temperature (400 vs 350 °C) and longer holding time (60 vs 3 min). The Fe and Na contents were reduced over 50% and 95%, respectively, by use of methyl tert-butyl ether (MTBE ) rather than dichloromethane as the organic solventmore » for biocrude recovery and they were reduced over 98% via additional application of a supported Ni catalyst during HTL. Finally, this work demonstrates that the hydrothermal treatment conditions influence the metal content in biocrude and that judicious selection of solvent and catalyst can lead to significant reduction in the metal content in biocrude.« less

Factors influencing production of lipase under metal supplementation by bacterial strain, Bacillus subtilis BDG-8.

PubMed

Dhevahi, B; Gurusamy, R

2014-11-01

Lipases are biocatalyst having wide applications in industries due to their versatile properties. In the present study, a lipolytic bacterial strain, Bacillus subtilis BDG-8 was isolated from an oil based industrial soil. The effect of selenium and nickel as a media supplement on enhancement of lipase production, was studied individually with the isolated strain by varying the concentration of selected metal. 60 μg l(-1) selenium enhanced lipase production to an enzyme activity measuring 7.8 U ml(-1) while 40 μgI(-1) nickel gave the maximum enzyme activity equivalent to 7.5 U ml(-1). However, nickel and selenium together at a range of concentration with an equal w/v ratio, at 60 μg l(-1) each, showed the maximum lipase activity of 8.5 U ml(-1). The effect of pH and temperature on lipase production showed maximum enzyme activity in the presence of each of the metals at pH 7 and 35°C among the other tested ranges. After optimisation of the parameters such as metal concentration, pH and temperature lipase production by Bacillus subtilis BDG-8 had increased several folds. This preliminary investigation may consequently lead as to various industrial applications such as treatment of wastewater contaminated with metal or oil with simultaneous lipase production.

Factors influencing pacing in triathlon

PubMed Central

Wu, Sam SX; Peiffer, Jeremiah J; Brisswalter, Jeanick; Nosaka, Kazunori; Abbiss, Chris R

2014-01-01

Triathlon is a multisport event consisting of sequential swim, cycle, and run disciplines performed over a variety of distances. This complex and unique sport requires athletes to appropriately distribute their speed or energy expenditure (ie, pacing) within each discipline as well as over the entire event. As with most physical activity, the regulation of pacing in triathlon may be influenced by a multitude of intrinsic and extrinsic factors. The majority of current research focuses mainly on the Olympic distance, whilst much less literature is available on other triathlon distances such as the sprint, half-Ironman, and Ironman distances. Furthermore, little is understood regarding the specific physiological, environmental, and interdisciplinary effects on pacing. Therefore, this article discusses the pacing strategies observed in triathlon across different distances, and elucidates the possible factors influencing pacing within the three specific disciplines of a triathlon. PMID:25258562

Metal matrix composite micromechanics: In-situ behavior influence on composite properties

NASA Technical Reports Server (NTRS)

Murthy, P. L. N.; Hopkins, D. A.; Chamis, C. C.

1989-01-01

Recent efforts in computational mechanics methods for simulating the nonlinear behavior of metal matrix composites have culminated in the implementation of the Metal Matrix Composite Analyzer (METCAN) computer code. In METCAN material nonlinearity is treated at the constituent (fiber, matrix, and interphase) level where the current material model describes a time-temperature-stress dependency of the constituent properties in a material behavior space. The composite properties are synthesized from the constituent instantaneous properties by virtue of composite micromechanics and macromechanics models. The behavior of metal matrix composites depends on fabrication process variables, in situ fiber and matrix properties, bonding between the fiber and matrix, and/or the properties of an interphase between the fiber and matrix. Specifically, the influence of in situ matrix strength and the interphase degradation on the unidirectional composite stress-strain behavior is examined. These types of studies provide insight into micromechanical behavior that may be helpful in resolving discrepancies between experimentally observed composite behavior and predicted response.

Influence of heavy metal stress on antioxidant status and DNA damage in Urtica dioica.

PubMed

Gjorgieva, Darinka; Kadifkova Panovska, Tatjana; Ruskovska, Tatjana; Bačeva, Katerina; Stafilov, Trajče

2013-01-01

Heavy metals have the potential to interact and induce several stress responses in the plants; thus, effects of heavy metal stress on DNA damages and total antioxidants level in Urtica dioica leaves and stems were investigated. The samples are sampled from areas with different metal exposition. Metal content was analyzed by Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), for total antioxidants level assessment the Ferric-Reducing Antioxidant Power (FRAP) assay was used, and genomic DNA isolation from frozen plant samples was performed to obtain DNA fingerprints of investigated plant. It was found that heavy metal contents in stems generally changed synchronously with those in leaves of the plant, and extraneous metals led to imbalance of mineral nutrient elements. DNA damages were investigated by Random Amplified Polymorphic DNA (RAPD) technique, and the results demonstrated that the samples exposed to metals yielded a large number of new fragments (total 12) in comparison with the control sample. This study showed that DNA stability is highly affected by metal pollution which was identified by RAPD markers. Results suggested that heavy metal stress influences antioxidant status and also induces DNA damages in U. dioica which may help to understand the mechanisms of metals genotoxicity.

Influence of Heavy Metal Stress on Antioxidant Status and DNA Damage in Urtica dioica

PubMed Central

Kadifkova Panovska, Tatjana; Bačeva, Katerina; Stafilov, Trajče

2013-01-01

Heavy metals have the potential to interact and induce several stress responses in the plants; thus, effects of heavy metal stress on DNA damages and total antioxidants level in Urtica dioica leaves and stems were investigated. The samples are sampled from areas with different metal exposition. Metal content was analyzed by Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), for total antioxidants level assessment the Ferric-Reducing Antioxidant Power (FRAP) assay was used, and genomic DNA isolation from frozen plant samples was performed to obtain DNA fingerprints of investigated plant. It was found that heavy metal contents in stems generally changed synchronously with those in leaves of the plant, and extraneous metals led to imbalance of mineral nutrient elements. DNA damages were investigated by Random Amplified Polymorphic DNA (RAPD) technique, and the results demonstrated that the samples exposed to metals yielded a large number of new fragments (total 12) in comparison with the control sample. This study showed that DNA stability is highly affected by metal pollution which was identified by RAPD markers. Results suggested that heavy metal stress influences antioxidant status and also induces DNA damages in U. dioica which may help to understand the mechanisms of metals genotoxicity. PMID:23862140

Kinetic vaporization of heavy metals during fluidized bed thermal treatment of municipal solid waste.

PubMed

Yu, Jie; Sun, Lushi; Xiang, Jun; Hu, Song; Su, Sheng

2013-02-01

Heavy metals volatilization during thermal treatment of model solid waste was theoretically and experimentally investigated in a fluidized bed reactor. Lead, cadmium, zinc and copper, the most four conventional heavy metals were investigated. Particle temperature model and metal diffusion model were established to simulate the volatilization of CdCl(2) evaporation and investigate the possible influencing factors. The diffusion coefficient, porosity and particle size had significant effects on metal volatilization. The higher diffusion coefficient and porosity resulted in the higher metal evaporation. The influence of redox conditions, HCl, water and mineral matrice were also investigated experimentally. The metal volatilization can be promoted by the injection of HCl, while oxygen played a negative role. The diffusion process of heavy metals within particles also had a significant influence on kinetics of their vaporization. The interaction between heavy metals and mineral matter can decrease metal evaporation amount by forming stable metallic species. Copyright © 2012 Elsevier Ltd. All rights reserved.

Influence of population density on the concentration and speciation of metals in the soil and street dust from urban areas.

PubMed

Acosta, J A; Gabarrón, M; Faz, A; Martínez-Martínez, S; Zornoza, R; Arocena, J M

2015-09-01

Street dust and soil from high, medium and low populated cities and natural area were analysed for selected physical-chemical properties, total and chemical speciation of Zn, Pb, Cu, Cr, Cd, Co, Ni to understand the influence of human activities on metal accumulation and mobility in the environment. The pH, salinity, carbonates and organic carbon contents were similar between soil and dust from the same city. Population density increases dust/soil salinity but has no influence on metals concentrations in soils. Increases in metal concentrations with population density were observed in dusts. Cu, Zn, Pb, Cr can be mobilized more easily from dust compared to the soil. In addition, population density increase the percentage of Pb and Zn associated to reducible and carbonate phase in the dust. The behaviour of metals except Cd in soil is mainly affected by physico-chemical properties, while total metal influenced the speciation except Cr and Ni in dusts. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biogeochemical Factors Influencing the Transport and Fate of Colloids and Colloid-Associated Contaminants in the Vadose Zone

NASA Astrophysics Data System (ADS)

Bradford, S. A.

2016-12-01

The vadose zone exhibits large spatial and temporal variability in many physical, chemical, and biological factors that strongly influence the transport and fate of colloids (e.g., microbes, nanoparticles, clays, and dissolved organic matter) and colloid-associated contaminants (e.g., heavy metals, radionuclides, pesticides, and antibiotics). This presentation highlights our research activities to better understand and predict the influence of specific biogeochemical processes on colloid and colloid-facilitated transport. Results demonstrate the sensitivity of colloid transport, retention, release, and clogging to transients in solution chemistry (e.g., ionic strength, pH, cation and anion type, and surfactants), water velocity and saturation, and preferential flow. Mathematical modeling at interface-, pore-, and continuum-scales is shown to be a critical tool to quantify the relative importance and coupling of these biogeochemical factors on colloid and contaminant transport and fate, which otherwise might be experimentally intractable. Existing gaps in knowledge and model limitations are identified.

The influence of biological and environmental factors on metallothionein concentration in the blood.

PubMed

Kowalska, Katarzyna; Bizoń, Anna; Zalewska, Marta; Milnerowicz, Halina

2015-01-01

The concentration of metallothionein (MT), a low-molecular-weight protein, is regulated by many factors, primarily metals (zinc, cadmium, copper), cytokines, glucocorticoides and free radicals. These factors are determined by such aspects of human biology as gender, pregnancy and age, as well as by environmental factors including the use of oral contraceptives and cigarette smoking, all which may affect MT levels in the body. The aim of this study was to investigate the influence of these biological and environmental factors on MT concentrations in erythrocyte lysate and in plasma. MT concentrations were determined by a two-step direct enzyme-linked immunosorbent assay. Evaluation of exposure to cigarette smoking was performed by checking cotinine levels in the plasma of subjects. The studies showed higher MT concentrations in both the erythrocyte lysate and plasma of women when compared to men. Furthermore, pregnancy causes an increase of MT concentration in plasma, while oral contraceptives cause an elevated concentration of MT in erythrocyte lysate. Age impacts plasma MT concentrations in men, whereas it does not affect concentrations of MT in erythrocyte lysate. Copyright © 2014 Elsevier GmbH. All rights reserved.

Temporal variations and spatial distributions of heavy metals in a wastewater-irrigated soil-eggplant system and associated influencing factors.

PubMed

Ai, Shiwei; Liu, Bailin; Yang, Ying; Ding, Jian; Yang, Wenzhi; Bai, Xiaojuan; Naeem, Sajid; Zhang, Yingmei

2018-05-30

Heavy metal pollution in farmlands is highly concerned as crops' easy-uptake of heavy metal can ultimately affect consumers. In order to offer suggestions on cultivating safe quality vegetable, specifically eggplant which is widely consumed for its nutritional value and antioxidant activity, a field study was undertaken to investigate the temporal variations and spatial distributions of heavy metals in a wastewater-irrigated soil-eggplant system. In the present study, eggplants were planted in the farmlands of Weichuan village (WC) (relatively unpolluted field), Liangzhuang village (LZ) (moderately polluted field) and Minqin village (MQ) (seriously polluted field) to elucidate their temporal uptake processes of heavy metals described by the sigmoid model. Eggplant tissues from severely polluted farmlands were found with higher heavy metal concentrations and lower yields compared with other two groups. What is more, 25 farmlands along the Dongdagou stream (heavy metals polluted stream) were chosen to analyze the spatial distribution of heavy metals in soils and eggplants. Heavy metal concentrations in eggplants decreased with the decline of heavy metal concentrations in soil from upstream (pollution source) to downstream. Moreover, several methods were employed to assess bioavailability of heavy metals in soils. All the bioavailable heavy metals were found in linear positive correlations with heavy metal concentrations. Meanwhile, linear correlations were found between heavy metals in soils and eggplants. At last, redundancy analysis was used to investigate the effects of soil properties (pH, organic matter and texture of soils) and heavy metals on eggplants' uptake. The results indicated that soil heavy metals had a dominant impact on their accumulations in eggplant fruit, with a variance contribution of 78.0%, while soil properties had a regulatory effect, with a variance contribution of 5.2%. Copyright © 2018 Elsevier Inc. All rights reserved.

Factors influencing workplace health promotion intervention: a qualitative systematic review.

PubMed

Rojatz, Daniela; Merchant, Almas; Nitsch, Martina

2017-10-01

Although workplace health promotion (WHP) has evolved over the last 40 years, systematically collected knowledge on factors influencing the functioning of WHP is scarce. Therefore, a qualitative systematic literature review was carried out to systematically identify and synthesize factors influencing the phases of WHP interventions: needs assessment, planning, implementation and evaluation. Research evidence was identified by searching electronic databases (Scopus, PubMed, Social Sciences Citation Index, ASSIA, ERIC, IBBS and PsycINFO) from 1998 to 2013, as well as by cross-checking reference lists of included peer-reviewed articles. The inclusion criteria were: original empirical research, description of WHP, description of barriers to and/or facilitators of the planning, implementation and/or evaluation of WHP. Finally, 54 full texts were included. From these, influencing factors were extracted and summarized using thematic analysis. The majority of influencing factors referred to the implementation phase, few dealt with planning and/or evaluation and none with needs assessment. The influencing factors were condensed into topics with respect to factors at contextual level (e.g. economic crisis); factors at organizational level (e.g. management support); factors at intervention level (e.g. quality of intervention concept); factors at implementer level (e.g. resources); factors at participant level (e.g. commitment to intervention) and factors referring to methodological and data aspects (e.g. data-collection issues). Factors regarding contextual issues and organizational aspects were identified across three phases. Therefore, future research and practice should consider not only the influencing factors at different levels, but also at different phases of WHP interventions. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Factors that influence nurses' customer orientation.

PubMed

Darby, D N; Daniel, K

1999-09-01

Hospital care mostly involves complex processes that are continuously adjusted to match individual client needs. As most patients cannot evaluate the technology used, they focus on personal interactions with care providers when making judgements about the care received. Nurses are the care team members that primarily provide ongoing care. This study aims to further understand factors that influence the way nursing staff relate to their patients. A model is presented of the contextual and self-perceptual factors that influence the level of customer/client orientation of nursing services in an Australian hospital setting along with details of a quantitative study. Nurses completed an anonymous questionnaire, which was then mailed directly to the researchers. Analysis of the data included factor analysis, regression and path analysis. The results show that contextual elements such as management commitment to service quality and self-perceptual factors such as role stress impact on the nurses' client service orientation. However, the variables being studied commonly have both direct and indirect effects with feelings about commitment to the organization having a notable mediating influence. The scales adapted from use in other industries are able to measure the perceptual and outcome variables in a health institutional setting. The managerial implications are that both a comprehensive programme of organizational culture and individual staff member development is needed if an enhanced customer orientation and the consequent improvement in client satisfaction with nursing care is to occur.

Debye-Waller Factor in Neutron Scattering by Ferromagnetic Metals

NASA Astrophysics Data System (ADS)

Paradezhenko, G. V.; Melnikov, N. B.; Reser, B. I.

2018-04-01

We obtain an expression for the neutron scattering cross section in the case of an arbitrary interaction of the neutron with the crystal. We give a concise, simple derivation of the Debye-Waller factor as a function of the scattering vector and the temperature. For ferromagnetic metals above the Curie temperature, we estimate the Debye-Waller factor in the range of scattering vectors characteristic of polarized magnetic neutron scattering experiments. In the example of iron, we compare the results of harmonic and anharmonic approximations.

Consideration of Real World Factors Influencing Greenhouse ...

EPA Pesticide Factsheets

Discuss a variety of factors that influence the simulated fuel economy and GHG emissions that are often overlooked and updates made to ALPHA based on actual benchmarking data observed across a range of vehicles and transmissions. ALPHA model calibration is also examined, focusing on developing generic calibrations for driver behavior, transmission gear selection and torque converter lockup. In addition, show the derivation of correction factors needed to estimate cold start emission results. To provide an overview of the ALPHA tool with additional focus on recent updates by presenting the approach for validating and calibrating ALPHA to match particular vehicles in a general sense, then by looking at the individual losses, and calibration factors likely to influence fuel economy.

What factors influence British medical students' career intentions?

PubMed

Ibrahim, Michael; Fanshawe, Angela; Patel, Vanash; Goswami, Karan; Chilvers, Geoffrey; Ting, Michelle; Pilavakis, Yiannis; Rao, Christopher; Athanasiou, Thanos

2014-12-01

The aim of this study was to identify factors that influence career choice in UK medical students. Students at seven institutions were invited to rate how important various factors were on influencing their career choices and how interested they were in pursuing different specialties. The influence of interpersonal relationship networks on career choice was also evaluated. 641 responses were collected. 44% (283) were male, 16% (105) were graduates and 41% (263) were final-year students. For Dermatology (p = 0.009), Paediatrics (p = 0.000), Radiology (p = 0.000), Emergency Medicine (p = 0.018) and Cardiothoracic Surgery (p = 0.000), there was a clear correlation between completing a clinical attachment and an interest in pursuing the specialty. Perceived characteristics of the speciality, individually and in clusters were considered important by specific subgroups of students, such as those interested in surgery. These students considered prestige (p = 0.0003), role models (p = 0.014), financial rewards after training (p = 0.0196) and technical challenge (p = 0.0011) as important factors. Demographics such as sex and age played a significant role in career choice. Interpersonal relationship networks do not have a significant influence on career intentions. This study shows that the career intentions of British medical students are influenced by their undergraduate experience and by the weight they place on different specialty-related factors.

Metal matrix composites: History, status, factors and future

NASA Astrophysics Data System (ADS)

Cyriac, Ajith James

The history, status, and future of metal matrix composites are presented by evaluating the progression of available literature through time. The trends that existed and issues that still prevail are discussed and a prediction of the future for MMCs is presented. The factors that govern the performance of metal matrix composites are also discussed. In many developed countries and in several developing countries there exists continued interest in MMCs. Researchers tried numerous combinations of matrices and reinforcements since work strictly on MMCs began in the 1950s. This led to developments for aerospace and defense applications, but resultant commercial applications were limited. The introduction of ceramic whiskers as reinforcement and the development of 'in-situ' eutectics in the 1960s aided high temperature applications in aircraft engines. In the late 1970s the automobile industries started to take MMCs seriously. In the last 20 years, MMCs evolved from laboratories to a class of materials with numerous applications and commercial markets. After the collapse of the Berlin Wall, prevailing order in the world changed drastically. This effect was evident in the progression of metal matrix composites. The internet connected the world like never before and tremendous information was available for researchers around the world. Globalization and the internet resulted in the transformation of the world to a more level playing field, and this effect is evident in the nature and source of research on metal matrix composites happening around the world.

Environmental influences: factors influencing a woman's decision to use dietary supplements.

PubMed

Conner, Mark; Kirk, Sara F L; Cade, Janet E; Barrett, Jennifer H

2003-06-01

Use of dietary supplements by women, particularly those over 40 years of age may be widespread in the United Kingdom. However, from surveillance data, there appears to be a disparity between nutrition and health needs and the rationale for and actual use of dietary supplements by women. This apparent paradox forms the basis for an inverse supplement hypothesis (i.e., supplement use in women appears to be most prevalent among those with least need). Little research has been done to examine the factors underlying the decision to use dietary supplements. Reasons for consuming dietary supplements are often complex, combining social, psychological, knowledge and economic factors. The theory of planned behavior is a widely used model for assessing factors influencing behavioral motivation and action that may be useful for assessing specific diet- and nutrition-related practices. It provided the basis for the development of a questionnaire to explore overall dietary supplement use in a cohort of women in the United Kingdom. The analysis of factors related to beliefs underlying dietary supplement use revealed differences between supplement users and nonusers. Differences included a stronger belief by users than nonusers that taking dietary supplements ensures against possible ill health. Both users and nonusers of supplements also perceived the media (books and magazines) to be a powerful influence on a person's decision to use supplements. These findings highlight the potential of the theory of planned behavior in exploring supplement-taking behavior while throwing light on the factors influencing an individual's motivations to use dietary supplements.

Uncovering Factors Influencing Interpersonal Health Communication

PubMed Central

Donné, Lennie; Jansen, Carel; Hoeks, John

2017-01-01

Talking to friends, family, or peers about health issues might, among other things, increase knowledge of social norms and feelings of self-efficacy in adopting a healthier lifestyle. We often see interpersonal health communication as an important mediating factor in the effects of health campaigns on health behavior. No research has been done so far, however, on factors that influence whether and how people talk about health issues without being exposed to a health campaign first. In this exploratory study, we interviewed 12 participants about their communication behavior concerning six different health themes, like smoking and exercising. The results suggest that at least four types of interpersonal health communication can be distinguished, each influenced by different factors, like conversational partner and objective of the conversation. Future research should take this diversity of interpersonal health communication into account, and focus on designing health campaigns that aim to trigger dialogue within target populations. PMID:28660238

Influence of biochar on heavy metals and microbial community during composting of river sediment with agricultural wastes.

PubMed

Chen, Yaoning; Liu, Yao; Li, Yuanping; Wu, Yanxin; Chen, Yanrong; Zeng, Guangming; Zhang, Jiachao; Li, Hui

2017-11-01

Studies were performed to evaluate influence of biochar addition on physico-chemical process, heavy metals transformation and bacterial community diversity during composting of sediment with agricultural wastes. Simultaneously, the relationships between those parameters including heavy metals and bacterial community compositions were evaluated by redundancy analysis (RDA). The results show that the extraction efficiency of DTPA extractable heavy metals decreased in both piles, and reduced more in pile with biochar addition about 0.1-2.96%. Biochar addition dramatically influenced the bacterial community structure during the composting process. Moreover, the bacterial community composition was significantly correlated with C/N ratio, water soluble carbon (WSC), and organic matter (OM) (P<0.05) in pile with biochar addition; while significantly correlated with temperature, WSC, and C/N ratio in pile which was free of biochar. This study would provide some valuable information for improving the composting for disposal of river sediment with heavy metals contamination. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors affecting the strength of multipass low-alloy steel weld metal

NASA Technical Reports Server (NTRS)

Krantz, B. M.

1972-01-01

The mechanical properties of multipass high-strength steel weld metals depend upon several factors, among the most important being: (1) The interaction between the alloy composition and weld metal cooling rate which determines the as-deposited microstructure; and (2) the thermal effects of subsequent passes on each underlying pass which alter the original microstructure. The bulk properties of a multipass weld are therefore governed by both the initial microstructure of each weld pass and its subsequent thermal history. Data obtained for a high strength low alloy steel weld metal confirmed that a simple correlation exists between mechanical properties and welding conditions if the latter are in turn correlated as weld cooling rate.

Influence of tool speeds on dissimilar friction stir spot welding characteristics of bulk metallic glass/Mg alloy

NASA Astrophysics Data System (ADS)

Shin, Hyung-Seop; Jung, Yoon-Chul; Lee, Jin-Kyu

2012-08-01

A small-scale joining technique of dissimilar friction stir spot welding (FSSW) between bulk metallic glass and Mg alloy sheet has been tried using an apparatus which was devised with a CNC milling machine to give a precise control of tool speeds. The influence of tool speeds on the joining characteristics during FSSW was investigated. As a result, it was found that the rotation speed and plunge speed of a tool during FSSW significantly influenced the welding performance of dissimilar FSSW between bulk metallic glasses and Mg alloy.

Hierarchical and coupling model of factors influencing vessel traffic flow.

PubMed

Liu, Zhao; Liu, Jingxian; Li, Huanhuan; Li, Zongzhi; Tan, Zhirong; Liu, Ryan Wen; Liu, Yi

2017-01-01

Understanding the characteristics of vessel traffic flow is crucial in maintaining navigation safety, efficiency, and overall waterway transportation management. Factors influencing vessel traffic flow possess diverse features such as hierarchy, uncertainty, nonlinearity, complexity, and interdependency. To reveal the impact mechanism of the factors influencing vessel traffic flow, a hierarchical model and a coupling model are proposed in this study based on the interpretative structural modeling method. The hierarchical model explains the hierarchies and relationships of the factors using a graph. The coupling model provides a quantitative method that explores interaction effects of factors using a coupling coefficient. The coupling coefficient is obtained by determining the quantitative indicators of the factors and their weights. Thereafter, the data obtained from Port of Tianjin is used to verify the proposed coupling model. The results show that the hierarchical model of the factors influencing vessel traffic flow can explain the level, structure, and interaction effect of the factors; the coupling model is efficient in analyzing factors influencing traffic volumes. The proposed method can be used for analyzing increases in vessel traffic flow in waterway transportation system.

Factors Influencing College Science Success

ERIC Educational Resources Information Center

Tai, Robert H.; Sadler, Philip M.; Mintzes, Joel J.

2006-01-01

In this paper, the authors report some of the salient findings of a large-scale, four-year national study, conducted at the Harvard-Smithsonian Center for Astrophysics, entitled "Factors Influencing College Science Success" (FICSS), which surveyed college students who enrolled in first-year biology, chemistry, and physics courses…

Assessment of Factors Influencing Communication in Clinical Pharmacy.

PubMed

Yao, Dongning; Jiang, Liang; Huang, Yuankai; Chen, Lei; Wang, Yitao; Xi, Xiaoyu

2018-01-01

This study aimed to identify and assess the factors that influence communication quality between clinical pharmacists and patients using a structural equation model based on the predisposing, reinforcing, and enabling constructs in educational/environmental diagnosis and evaluation-policy, regulatory, and organizational constructs in educational and ecological development model to identify the most effective path to increase their communication quality. A survey was conducted at 253 Class-A tertiary hospitals in China from March to December 2016. During on-site observations, verbal communications between clinical pharmacists ( n = 752) and patients were audio recorded, and communication quality was rated by an expert panel on an 8-item Quality of Communication Rating Scale. Clinical pharmacists completed questionnaires that examined the predisposing, enabling, and reinforcing factors that influenced communication quality. Finally, AMOS was employed to examine the relationships between the three factors and communication quality. The results indicated that all three factors positively affected communication quality, with correlation coefficients of .26, .13, and .17, respectively. The most influential predisposing factor was attitude (.77), the most influential enabling factors were self-efficacy (.71) and confidence (.72), and the most influential reinforcing factor was rewards (.74). The findings suggest that pharmacists' attitudes toward, perceived knowledge of, and skill and confidence in communication, and the rewards offered by pharmacy management are the most influential factors that influence communication quality.

Factors influencing the implementation of evidence in Chinese nursing practice.

PubMed

Cheng, Lei; Broome, Marion E; Feng, Sheng; Hu, Yan

2017-12-01

To explore the influencing factors from staff nurses, nurse managers, nursing directors and a physician involved in nursing evidence implementation in Mainland China. Although the need for evidence-based nursing is well recognised, continuous efforts are needed to strive for closing the gap from evidence to action. Previous studies have explored influencing factors from individual and organisational perspectives in Western countries. However, it remains unclear what the influences (i.e., context and culture) in the developing countries as China. A grounded theory design using in-depth individual interviews was conducted. Interviews with 56 participants from 24 evidence-based nursing implementation projects were conducted in Mainland China. Constant comparative analysis was used to discover the concepts describing the influencing factors during the implementation process. Factors that influenced implementation of evidence-based practice in the Chinese context were identified. These included the leaders of the projects, the nature of the evidence, practising nurses, patients involved in the projects, the system where the projects were implemented, as well as the influence from outside of the system. A variety of factors influencing evidence implementation in Chinese nursing context were identified and further explored from the perspective of different project leaders and culture influence. There is apparently a strong demand for a supportive system, targeted strategies to facilitate various evidence implementations and integrated core elements of evidence-based practice at the point care. The blurred boundaries and complexity of influencing factors call for a systematic and dynamic perspective during implementation. The competitive priorities emphasise the importance of integration between clinical nursing care and evidence-based practice. © 2017 John Wiley & Sons Ltd.

[Factors influencing nurses' organizational citizenship behavior].

PubMed

Park, Junhee; Yun, Eunkyung; Han, Sangsook

2009-08-01

This study was conducted to identify the factors that influence nurses' organizational citizenship behavior. A cross-sectional design was used, with a convenience sample of 547 nurses from four university hospitals in Seoul and Gyeonggi province. The data were collected through a questionnaire survey done from September 22 to October 10, 2008. The tools used for this study were scales on organizational citizenship behavior (14 items), self-leadership (14 items), empowerment (10 items), organizational commitment (7 items), job satisfaction (8 items) and transformational.transactional leadership (14 items). Cronbach's alpha and factor analysis were examined to test reliability and construct validity of the scale. The data collected were processed using SPSS Window 15.0 Program for actual numbers and percentages, differences in the dependent variable according to general characteristics, and means, standard deviations, correlation coefficients and multiple regression analysis. The factors influencing nurses' organizational citizenship behavior were identified as self-leadership(beta=.247), empowerment (beta=.233), job satisfaction (beta=.209), organizational commitment (beta=.158), and transactional leadership (beta=.142). Five factors explained 42.0% of nurses' organizational citizenship behavior. The results of this study can be used to develop further management strategies for enhancement of nurses' organizational citizenship behavior.

The influence of EDDS on the uptake of heavy metals in hydroponically grown sunflowers.

PubMed

Tandy, Susan; Schulin, Rainer; Nowack, Bernd

2006-03-01

Phytoextraction is an environmentally friendly in situ technique for cleaning up metal contaminated land. Unfortunately, efficient metal uptake by remediation plants is often limited by low phytoavailability of the targeted metals. Chelant assisted phytoextraction has been proposed to improve the efficiency of phytoextraction. Phytoremediation involves several subsequent steps: transfer of metals from the bulk soil to the root surfaces, uptake into the roots and translocation to the shoots. Nutrient solution experiments address the latter two steps. In this context we investigated the influence of the biodegradable chelating agent SS-EDDS on uptake of essential (Cu and Zn) and non-essential (Pb) metals by sunflowers from nutrient solution. EDDS was detected in shoots and xylem sap for the first time, proving that it is taken up into the above ground biomass of plants. The essential metals Cu and Zn were decreased in shoots in the presence of EDDS whereas uptake of the non-essential Pb was enhanced. We suggest that in the presence of EDDS all three metals were taken up by the non-selective apoplastic pathway as the EDDS complexes, whereas in the absence of EDDS essential metal uptake was primarily selective along the symplastic pathway. This shows that synthetic chelating agents do not necessarily increase uptake of heavy metals, when soluble concentrations are equal in the presence and absence of chelates.

Factors Influencing Title VII Bilingual Program Institutionalization.

ERIC Educational Resources Information Center

Lewis, Gerald R.; And Others

1985-01-01

This study of the primary restraining and driving forces that influence Title VII bilingual education programs found the external environment, the local community, to be the main factor influencing institutionalization and self-renewal. The internal environment--the local school, and the local school's organization or central office, school board,…

Influence of Humic Acid Complexation with Metal Ions on Extracellular Electron Transfer Activity.

PubMed

Zhou, Shungui; Chen, Shanshan; Yuan, Yong; Lu, Qin

2015-11-23

Humic acids (HAs) can act as electron shuttles and mediate biogeochemical cycles, thereby influencing the transformation of nutrients and environmental pollutants. HAs commonly complex with metals in the environment, but few studies have focused on how these metals affect the roles of HAs in extracellular electron transfer (EET). In this study, HA-metal (HA-M) complexes (HA-Fe, HA-Cu, and HA-Al) were prepared and characterized. The electron shuttle capacities of HA-M complexes were experimentally evaluated through microbial Fe(III) reduction, biocurrent generation, and microbial azoreduction. The results show that the electron shuttle capacities of HAs were enhanced after complexation with Fe but were weakened when using Cu or Al. Density functional theory calculations were performed to explore the structural geometry of the HA-M complexes and revealed the best binding sites of the HAs to metals and the varied charge transfer rate constants (k). The EET activity of the HA-M complexes were in the order HA-Fe > HA-Cu > HA-Al. These findings have important implications for biogeochemical redox processes given the ubiquitous nature of both HAs and various metals in the environment.

Characteristics of heavy metal pollution on roadside soil along highway

NASA Astrophysics Data System (ADS)

Zheng, Chaocheng

2017-10-01

Highway traffic is the main source of heavy metal pollution. Due to limited cropland, it is very common to plant crops along the highways. So, in view of agricultural products safety, heavy metal pollution by highway traffic to soils along highway is widely concerned. Therefore, to study distribution traits, accumulative laws and influence factors of heavy metals in agricultural soils could provide scientific evidence and theoretical basis for environmental protection along express way.

The influence of heavy metals on the production of extracellular polymer substances in the processes of heavy metal ions elimination.

PubMed

Mikes, J; Siglova, M; Cejkova, A; Masak, J; Jirku, V

2005-01-01

Wastewaters from a chemical industry polluted by heavy metal ions represent a hazard for all living organisms. It can mean danger for ecosystems and human health. New methods are sought alternative to traditional chemical and physical processes. Active elimination process of heavy metals ions provided by living cells, their components and extracellular products represents a potential way of separating toxic heavy metals from industrial wastewaters. While the abilities of bacteria to remove metal ions in solution are extensively used, fungi have been recognized as a promising kind of low-cost adsorbents for removal of heavy-metal ions from aqueous waste sources. Yeasts and fungi differ from each other in their constitution and in their abilities to produce variety of extracellular polymeric substances (EPS) with different mechanisms of metal interactions. The accumulation of Cd(2+), Cr(6+), Pb(2+), Ni(2+) and Zn(2+) by yeasts and their EPS was screened at twelve different yeast species in microcultivation system Bioscreen C and in the shaking Erlenmayer's flasks. This results were compared with the production of yeast EPS and the composition of yeast cell walls. The EPS production was measured during the yeast growth and cell wall composition was studied during the cultivations in the shaking flasks. At the end of the process extracellular polymers and their chemical composition were isolated and amount of bound heavy metals was characterized. The variable composition and the amount of the EPS were found at various yeast strains. It was influenced by various compositions of growth medium and also by various concentrations of heavy metals. It is evident, that the amount of bound heavy metals was different. The work reviews the possibilities of usage of various yeast EPS and components of cell walls in the elimination processes of heavy metal ions. Further the structure and properties of yeasts cell wall and EPS were discussed. The finding of mechanisms mentioned

Hierarchical and coupling model of factors influencing vessel traffic flow

PubMed Central

Liu, Jingxian; Li, Huanhuan; Li, Zongzhi; Tan, Zhirong; Liu, Ryan Wen; Liu, Yi

2017-01-01

Understanding the characteristics of vessel traffic flow is crucial in maintaining navigation safety, efficiency, and overall waterway transportation management. Factors influencing vessel traffic flow possess diverse features such as hierarchy, uncertainty, nonlinearity, complexity, and interdependency. To reveal the impact mechanism of the factors influencing vessel traffic flow, a hierarchical model and a coupling model are proposed in this study based on the interpretative structural modeling method. The hierarchical model explains the hierarchies and relationships of the factors using a graph. The coupling model provides a quantitative method that explores interaction effects of factors using a coupling coefficient. The coupling coefficient is obtained by determining the quantitative indicators of the factors and their weights. Thereafter, the data obtained from Port of Tianjin is used to verify the proposed coupling model. The results show that the hierarchical model of the factors influencing vessel traffic flow can explain the level, structure, and interaction effect of the factors; the coupling model is efficient in analyzing factors influencing traffic volumes. The proposed method can be used for analyzing increases in vessel traffic flow in waterway transportation system. PMID:28414747

Quantitative influence of risk factors on blood glucose level.

PubMed

Chen, Songjing; Luo, Senlin; Pan, Limin; Zhang, Tiemei; Han, Longfei; Zhao, Haixiu

2014-01-01

The aim of this study is to quantitatively analyze the influence of risk factors on the blood glucose level, and to provide theory basis for understanding the characteristics of blood glucose change and confirming the intervention index for type 2 diabetes. The quantitative method is proposed to analyze the influence of risk factors on blood glucose using back propagation (BP) neural network. Ten risk factors are screened first. Then the cohort is divided into nine groups by gender and age. According to the minimum error principle, nine BP models are trained respectively. The quantitative values of the influence of different risk factors on the blood glucose change can be obtained by sensitivity calculation. The experiment results indicate that weight is the leading cause of blood glucose change (0.2449). The second factors are cholesterol, age and triglyceride. The total ratio of these four factors reaches to 77% of the nine screened risk factors. And the sensitivity sequences can provide judgment method for individual intervention. This method can be applied to risk factors quantitative analysis of other diseases and potentially used for clinical practitioners to identify high risk populations for type 2 diabetes as well as other disease.

Factors influencing healthcare service quality

PubMed Central

Mosadeghrad, Ali Mohammad

2014-01-01

Background: The main purpose of this study was to identify factors that influence healthcare quality in the Iranian context. Methods: Exploratory in-depth individual and focus group interviews were conducted with 222 healthcare stakeholders including healthcare providers, managers, policy-makers, and payers to identify factors affecting the quality of healthcare services provided in Iranian healthcare organisations. Results: Quality in healthcare is a production of cooperation between the patient and the healthcare provider in a supportive environment. Personal factors of the provider and the patient, and factors pertaining to the healthcare organisation, healthcare system, and the broader environment affect healthcare service quality. Healthcare quality can be improved by supportive visionary leadership, proper planning, education and training, availability of resources, effective management of resources, employees and processes, and collaboration and cooperation among providers. Conclusion: This article contributes to healthcare theory and practice by developing a conceptual framework that provides policy-makers and managers a practical understanding of factors that affect healthcare service quality. PMID:25114946

[AVS concentrations in Xinan Creek and the influencing factors].

PubMed

Liu, Xiao-Bing; Wen, Yan-Mao; Li, Feng; Wu, Chang-Hua; Duan, Zhi-Peng

2012-07-01

Sediment and overlying water samples were collected at 10 sampling stations at Xinan Creek, a tidal river in Pearl River Delta, and analyzed for physical and chemical characteristics as well as microbial incicators, in order to reveal the main factors dominating the spatial distribution of acid volatile sulfide (AVS). The effects of Eh, SRB OC and TS on the spatial distribution of AVS were investigated and the impact of AVS on the toxicity of heavy metals in the studied area was evaluated. The results showed that the range of AVS was 0.207-41.453 micromol x g(-1), with an average of 6.684 micromol x g(-1), which is relatively high compared to the results in other studies. The AVS value of the surface layer was higher than the bottom layer in 5 stations. The AVS values in both the surface layer and the bottom layer were highly variable, the coefficients of variation being 93.61% and 153.09% , respectively. The analytical results revealed that TS was the factor with the greatest impact on the spatial distribution of AVS, and the order was TS > OC > Eh > SRB. Potential ecological risk of heavy metals existed in 60% of the smpling stations based on the value of Sigma (SEM5-AVS), however, with the criterion of [Sigma(SEM5-AVS)]/foc, none of them had inacceptable ecological risk. Furthermore, in terms of single species of heavy metals, there was certain risk of toxic effect for all the five heavy metals (Cd, Ni, Cu, Zn and Pb). The above mentioned results will provide valuable data for the in-depth study of the formation mechanism of AVS and helpful reference for environmental impact assessment and scientific rehabilitation of heavy metals in polluted rivers.

Influence of heavy metals and 4-nonylphenol on reproductive function in fish.

PubMed

Popek, Włodzimierz; Dietrich, Grzegorz; Glogowski, Jan; Demska-Zakeś, Krystyna; Drag-Kozak, Ewa; Sionkowski, Jan; Łuszczek-Trojan, Ewa; Epler, Piotr; Demianowicz, Wiesław; Sarosiek, Beata; Kowalski, Radosław; Jankun, Małgorzata; Zakeś, Zdzisław; Król, Jarosław; Czerniak, Stanisław; Szczepkowski, Mirosław

2006-01-01

Many industrial and agricultural chemicals (including heavy metals and alkylphenols) present in the environment have adverse effects on the reproductive function in fish. Three studies were conducted to assess toxicity of these chemicals towards reproduction of freshwater fish. It was shown that heavy metals added to the diets accumulate in brain tissue of carp, and this accumulation results in inhibition of the secretion of noradrenaline and stimulation of the secretion of dopamine in the hypothalamus. These processes results in a disturbance of hormonal equilibrium of the hypothalamo-pituitary system, which can unfavorably influence the efficiency of artificial spawning in fish. Quality of salmonid and sturgeon sperm was impaired after in vitro exposure to heavy metals. The degree of this toxic effect was species-specific. It was demonstrated that sperm motility parameters appeared to be good indicators of adverse effects of heavy metals fish sperm. The protection role of seminal plasma against toxic effects of heavy metals was suggested for salmonid fish. Oral application of 4-nonylphenol (NP) disrupted reproduction in pikeperch. In juvenile fish a decrease in the percentage of males and an increase of intersex fish was observed in relation to dose of NP and time of exposure to this alkylphenol. Exposure of adult males to the NP led to the reduction in fecundity, milt quality and fertility.

Soft Factors Influence College Enrollment

ERIC Educational Resources Information Center

Fogg, Neeta P.; Harrington, Paul E.

2010-01-01

Evidence about the role that "soft factors" like student engagement and school environment play in influencing whether high school students go on to enroll in college is hard to come by. Over the past two years, the Center for Labor Market Studies (CLMS) of Northeastern University, with support from the Nellie Mae Education Foundation…

Metal Speciation in Landfill Leachates with a Focus on the Influence of Organic Matter

DOE Office of Scientific and Technical Information (OSTI.GOV)

F Claret; C Tournassat; C Crouzet

This study characterizes the heavy-metal content in leachates collected from eight landfills in France. In order to identify heavy metal occurrence in the different size fractions of leachates, a cascade filtration protocol was applied directly in the field, under a nitrogen gas atmosphere to avoid metal oxidation. The results of analyses performed on the leachates suggest that most of the metals are concentrated in the <30 kDa fraction, while lead, copper and cadmium show an association with larger particles. Initial speciation calculations, without considering metal association with organic matter, suggest that leachate concentrations in lead, copper, nickel and zinc aremore » super-saturated with respect to sulphur phases. Speciation calculations that account for metal complexation with organic matter, considered as fulvic acids based on C1(s) NEXAFS spectroscopy, show that this mechanism is not sufficient to explain such deviation from equilibrium conditions. It is therefore hypothesized that the deviation results also from the influence of biological activity on the kinetics of mineral phase precipitation and dissolution, thus providing a dynamic system. The results of chemical analyses of sampled fluids are compared with speciation calculations and some implications for the assessment of metal mobility and natural attenuation in a context of landfill risk assessment are discussed.« less

Factors influencing US medical students' decision to pursue surgery.

PubMed

Schmidt, Lauren E; Cooper, Clairice A; Guo, Weidun Alan

2016-06-01

Interest and applications to surgery have steadily decreased over recent years in the United States. The goal of this review is to collect the current literature regarding US medical students' experience in surgery and factors influencing their intention to pursue surgery as a career. We hypothesize that multiple factors influence US medical students' career choice in surgery. Six electronic databases (PubMed, SCOPUS, Web of Science, Education Resources Information Center, Embase, and PsycINFO) were searched. The inclusion criteria were studies published after the new century related to factors influencing surgical career choice among US medical students. Factors influencing US medical student surgical career decision-making were recorded. A quality index score was given to each article selected to minimize risk of bias. We identified 38 relevant articles of more than 1000 nonduplicated titles. The factors influencing medical student decision for a surgical career were categorized into five domains: mentorship and role model (n = 12), experience (clerkship n = 9, stereotype n = 4), timing of exposure (n = 9), personal (lifestyle n = 8, gender n = 6, finance n = 3), and others (n = 2). This comprehensive systemic review identifies mentorship, experience in surgery, stereotypes, timing of exposure, and personal factors to be major determinants in medical students' decisions to pursue surgery. These represent areas that can be improved to attract applicants to general surgery residencies. Surgical faculty and residents can have a positive influence on medical students' decisions to pursue surgery as a career. Early introduction to the field of surgery, as well as recruitment strategies during the preclinical and clinical years of medical school can increase students' interest in a surgical career. Copyright © 2016 Elsevier Inc. All rights reserved.

Lead (Pb) and other metals in New York City community garden soils: factors influencing contaminant distributions

PubMed Central

Mitchell, Rebecca G.; Spliethoff, Henry M.; Ribaudo, Lisa N.; Lopp, Donna M.; Shayler, Hannah A.; Marquez-Bravo, Lydia G.; Lambert, Veronique T.; Ferenz, Gretchen S.; Russell-Anelli, Jonathan M.; Stone, Edie B.; McBride, Murray B.

2014-01-01

Urban gardens provide affordable fresh produce to communities with limited access to healthy food but may also increase exposure to lead (Pb) and other soil contaminants. Metals analysis of 564 soil samples from 54 New York City (NYC) community gardens found at least one sample exceeding health-based guidance values in 70% of gardens. However, most samples (78%) did not exceed guidance values, and medians were generally below those reported in NYC soil and other urban gardening studies. Barium (Ba) and Pb most frequently exceeded guidance values and along with cadmium (Cd) were strongly correlated with zinc (Zn), a commonly measured nutrient. Principal component analysis suggested that contaminants varied independently from organic matter and geogenic metals. Contaminants were associated with visible debris and a lack of raised beds; management practices (e.g., importing uncontaminated soil) have likely reduced metals concentrations. Continued exposure reduction efforts would benefit communities already burdened by environmental exposures. PMID:24502997

Lead (Pb) and other metals in New York City community garden soils: factors influencing contaminant distributions.

PubMed

Mitchell, Rebecca G; Spliethoff, Henry M; Ribaudo, Lisa N; Lopp, Donna M; Shayler, Hannah A; Marquez-Bravo, Lydia G; Lambert, Veronique T; Ferenz, Gretchen S; Russell-Anelli, Jonathan M; Stone, Edie B; McBride, Murray B

2014-04-01

Urban gardens provide affordable fresh produce to communities with limited access to healthy food but may also increase exposure to lead (Pb) and other soil contaminants. Metals analysis of 564 soil samples from 54 New York City (NYC) community gardens found at least one sample exceeding health-based guidance values in 70% of gardens. However, most samples (78%) did not exceed guidance values, and medians were generally below those reported in NYC soil and other urban gardening studies. Barium (Ba) and Pb most frequently exceeded guidance values and along with cadmium (Cd) were strongly correlated with zinc (Zn), a commonly measured nutrient. Principal component analysis suggested that contaminants varied independently from organic matter and geogenic metals. Contaminants were associated with visible debris and a lack of raised beds; management practices (e.g., importing uncontaminated soil) have likely reduced metals concentrations. Continued exposure reduction efforts would benefit communities already burdened by environmental exposures. Copyright © 2014 Elsevier Ltd. All rights reserved.

Influences on copper bioaccumulation, growth, and survival of the midge, Chironomus tentans, in metal-contaminated sediments

USGS Publications Warehouse

Besser, John M.; Kubitz, Jody A.; Ingersoll, Chris G.; Braselton, W. Emmett; Giesy, John P.

1995-01-01

Sediment bioassays with larvae of the midge, Chironomus tentans, were used to evaluate influences on the bioavailability and toxicity of copper (Cu) in sediments with a wide range of concentrations of metals, acid-volatile sulfide (AVS), and other physicochemical characteristics. Sediments were collected from sixteen lakes in Michigan, USA, and from twelve sites in the Clark Fork River drainage of Montana, USA, which are contaminated with metals from mining activities and from other anthropogenic sources. Bioassays with C. tentans larvae were conducted for ten days in a static-renewal test system, with endpoints of survival, growth, and metal bioaccumulation. Bioaccumulation of copper (Cu) was strongly correlated with Cu concentrations in porewater, and was increased significantly at Cu concentrations less than those affecting growth or survival. Midge survival and growth were not significantly correlated with concentrations of Cu in sediment or porewater, and were poorly predicted by ratios of acid-extractable metals to AVS in sediments. Principal components analysis indicated that Cu concentrations in porewater and bioaccumulation of Cu by midge larvae were influenced by AVS, sediment organic carbon, and porewater pH, and that toxicity was associated with high concentrations of Cu, high concentrations of zinc (Zn) and ammonia. No toxicity was observed in several sediments which contained low concentrations of AVS and high concentrations of Cu and Zn. In sediments which contain little AVS, bioavailability of metals may be controlled by constituents other than sulfides, such as organic matter and metal hydrous oxides. These results indicate that assessments of toxicity in metal-contaminated sediments should evaluate the importance of metal-binding phases other than sulfides, and the possible contributions of ammonia or other toxicants to toxicity in sediment bioassays.

Size versus electronic factors in transition metal carbide and TCP phase stability

NASA Astrophysics Data System (ADS)

Pettifor, D. G.; Seiser, B.; Margine, E. R.; Kolmogorov, A. N.; Drautz, R.

2013-09-01

The contributions of atomic size and electronic factors to the structural stability of transition metal carbides and topologically close-packed (TCP) phases are investigated. The hard-sphere model that has been used by Cottrell to rationalize the occurrence of the octahedral and trigonal local coordination polyhedra within the transition metal carbides is shown to have limitations in TiC since density functional theory (DFT) predicts that the second most metastable phase closest to the B1 (NaCl) ground state takes the B? (BN) structure type with 5-atom local coordination polyhedra with very short Ti-C bond lengths. The importance of electronic factors in the TCP phases is demonstrated by DFT predictions that the A15, ? and ? phases are stabilized between groups VI and VII of the elemental transition metals, whereas the ? and Laves phases are destabilized. The origin of this difference is related to the bimodal shape parameter of the electronic density of states by using the bond-order potential expansion of the structural energy within a canonical tight-binding model. The importance of the size factor in the TCP phases is illustrated by the DFT heats of formation for the binary systems Mo-Re, Mo-Ru, Nb-Re and Nb-Ru which show that the ? and Laves phases become more and more stable compared to A15, ? and ? as the size factor increases from Mo-Re through to Nb-Ru.

Investigating the influence of heavy metals on macro-invertebrate assemblages using Partial Cononical Correspondence Analysis (pCCA)

NASA Astrophysics Data System (ADS)

Beasley, Gary; Kneale, Pauline E.

This paper defines the spectrum of impairment to stream macroinvertebrates arising from urban runoff. Field sampling of stream sediments at 62 sites across Yorkshire, UK was used to investigate the influence of heavy metals and habitat on macroinvertebrate family distribution using partial Canonical Correspondence Analysis (pCCA). Increasing urbanization and trafficking was associated with increasing levels of metal pollution but, even when traffic is light, family numbers can be reduced by 50%. Industrial areas and motorway runoff depress macroinvertebrate numbers but drainage from streets with no off-road parking in residential areas can have similar impacts. The heavy metals in the sediment accounted for approximately 24% of the variation in macroinvertebrate community composition while the physical habitat variables used in RIVPACS (River InVertebrate Prediction And Classification System) (Wright, 2000) accounted for an additional 30%. Zinc and nickel were the main metal influences regardless of the time of sampling; at these sites copper is less than critical. Results agree with those reported in other studies in which families mainly from the orders Ephemeroptera (mayfly), Plecoptera (stonefly) and Tricoptera (caddisfly) displayed metal sensitivity in that they were absent from metal polluted streams. However, within each of these orders, a continuum of sensitivity is evident: this highlights the risks of generalising on orders rather than using family or indeed species data.

A factor influence study of trace element bioaccumulation in moss bags.

PubMed

Cesa, M; Campisi, B; Bizzotto, A; Ferraro, C; Fumagalli, F; Nimis, P L

2008-10-01

Moss bags of Rhynchostegium riparioides were exposed to different water concentrations of 11 trace elements under laboratory conditions, according to a saturated fractional factorial design (67 treated combinations), with the aim of measuring (1) element uptake and (2) the main effects and first-order interactions of influent factors. Bioaccumulation was directly proportional to water concentration, but the uptake ratio (ranging from 10(2) to 10(5)) also depended on the concentration of other metals. The highest uptake ratios were observed for Al, Cu, Cr, Hg, and Pb. The multiple regression model showed that interactions among elements exist and induce both antagonism (Fe is the most frequent competitor) and synergism (Cr exerts a great influence on Pb and Zn uptake). Interactions might be relatively strong (as for As, Cr, and Pb) or weak (Cd and Hg). This evidence should be taken into consideration in biomonitoring surveys of industrial sites, where effluents release more than one contaminant.

A quantitative study of factors influencing lamellar eutectic morphology during solidification

NASA Technical Reports Server (NTRS)

Kaukler, W. F. S.

1981-01-01

The factors that influence the shape of the solid-liquid interface of a lamellar binary eutectic alloy are evaluated. Alloys of carbon tetrabromide and hexachloroethane which serve as a transparent analogue of lamellar metallic eutectics are used. The observed interface shapes are analyzed by computer-aided methods. The solid-liquid interfacial free energies of each of the individual phases comprising the eutectic system are measured as a function of composition using a 'grain boundary groove' technique. The solid-liquid interfacial free energy of the two phases are evaluated directly from the eutectic interface. The phase diagram for the system, the heat of fusion as a function of composition, and the density as a function of composition are measured. The shape of the eutectic interface is controlled mainly by the solid-liquid and solid-solid interfacial free energy relationships at the interface and by the temperature gradient present, rather than by interlamellar diffusion in the liquid at the interface, over the range of growth rates studied.

Atmospheric trace metals measured at a regional background site (Welgegund) in South Africa

NASA Astrophysics Data System (ADS)

Venter, Andrew D.; van Zyl, Pieter G.; Beukes, Johan P.; Josipovic, Micky; Hendriks, Johan; Vakkari, Ville; Laakso, Lauri

2017-03-01

fractions indicated elevated trace metal concentrations coinciding with the end of the dry season, which could partially be attributed to decreased wet removal and increases in wind generation of particulates. Principal component factor analysis (PCFA) revealed four meaningful factors in the PM1 size fraction, i.e. crustal, pyrometallurgical-related and Au slimes dams. No meaningful factors were determined for the PM1-2. 5 and PM2. 5-10 size fractions, which was attributed to the large influence of wind-blown dust on atmospheric trace metals determined at Welgegund. Pollution roses confirmed the influence of wind-blown dust on trace metal concentrations measured at Welgegund, while the impact of industrial activities was also substantiated.

Accumulation of trace metals in sediments in a Mediterranean Lagoon: Usefulness of metal sediment fractionation and elutriate toxicity assessment.

PubMed

Zaaboub, Noureddine; Martins, Maria Virgínia Alves; Dhib, Amel; Béjaoui, Béchir; Galgani, François; El Bour, Monia; Aleya, Lotfi

2015-12-01

The authors investigated sediment quality in Bizerte Lagoon (Tunisia) focusing on geochemical characteristics, metal sediment fractionation and elutriate toxicity assessment. Nickel, Cu, Zn, Pb, Cr and Cd partitioning in sediments was studied; accumulation and bioavailability were elucidated using enrichment factors, sequential extractions, redox potential, acid volatile sulfide and biotest procedures in toxicity evaluation. Results revealed an accumulation for Pb and Zn, reaching 99 and 460 mg kg(-1) respectively. In addition, the acid volatile sulfide values were high in both eastern and western lagoon areas, thus affecting metal availability. Mean enrichment factor values for Pb and Zn were 4.8 and 4.9, respectively, with these elements as the main contributors to the lagoon's moderate enrichment level. Toxicity levels were influenced by accumulation of Zn in different surface sediment areas. Core sediments were investigated in areas with the highest metal concentrations; metal fractionation and biotest confirmed that Zn contributes to sediment toxicity. Copyright © 2015 Elsevier Ltd. All rights reserved.

Risk of antibiotic resistance from metal contaminated soils

NASA Astrophysics Data System (ADS)

Knapp, Charles

2013-04-01

It is known that contaminated soils can lead to increased incidence of illness and disease, but it may also prevent our ability to fight disease. Many antibiotic resistant genes (ARG) acquired by bacteria originate from the environment. It is important to understand factors that influence levels of ARG in the environment, which could affect us clinically and agriculturally. The presence of elevated metal content in soils often promotes antibiotic resistance in exposed microorganisms. Using qPCR, the abundances of ARG to compare levels with geochemical conditions in randomly selected soils from several countries. Many ARG positively correlated with soil metal content, especially copper, chromium, nickel, lead, and iron. Results suggest that geochemical metal conditions influence the potential for antibiotic resistance in soil, which might be used to estimate baseline gene presence on various landscape scales and may translate to epidemiological risk of antibiotic-resistance transmission from the environment. This suggests that we may have to reconsider tolerances of metal pollution in the environment.

Factors that influence the childbearing intentions of Canadian men.

PubMed

Roberts, E; Metcalfe, A; Jack, M; Tough, S C

2011-05-01

The role of men in the childbearing decision process and the factors that influence men's childbearing intentions have been relatively unexplored in the literature. This study aimed to describe the factors that strongly influence the childbearing intentions of men and to describe differences in these factors according to men's age group. A telephone survey (response rate 84%) was conducted with 495 men between the ages of 20 and 45 living in an urban setting who, at the time of contact, did not have biological children. Men were asked about what factors strongly influence their intention to have children. Univariable and multivariable logistic regressions were conducted to determine if these factors were significantly associated with age. Of those sampled, 86% of men reported that at some point in the future they planned to become a parent. The factors that men considered to be most influential in their childbearing intentions were: the need to be financially secure, their partner's interest/desire to have children, their partner's suitability to be a parent and their personal interest/desire to have children. Men who were 35-45 years old had lower odds of stating that financial security (crude OR: 0.32, 95% CI: 0.18-0.54) and partner's interest in having children (crude OR: 0.57, 95% CI: 0.33-0.99) were very influential, but had higher odds of stating that their biological clock (crude OR: 4.37, 95% CI: 1.78-10.76) was very influential in their childbearing intentions than men in the 20-24 year age group. The factors that influence men's intentions about when to become a parent may change with age. Understanding what influences men to have children, and what they understand about reproductive health is important for education, program and policy development.

Influence of the submarine volcanic eruption off El Hierro (Canary Islands) on the mesopelagic cephalopod's metal content.

PubMed

Lozano-Bilbao, Enrique; Gutiérrez, Ángel José; Hardisson, Arturo; Rubio, Carmen; González-Weller, Dailos; Aguilar, Natacha; Escánez, Alejandro; Espinosa, José María; Canales, Paula; Lozano, Gonzalo

2018-04-01

This work investigates whether a submarine volcanic eruption off El Hierro (Canary Islands) in October 2011 influenced the metal contents of two deep water cephalopod species: Abraliopsis morisii and Pyroteuthis margaritifera. This was assessed by comparing metal contents in specimens collected off the island of El Hierro and in the neighbouring islands of La Palma and Tenerife during an experimental deep water fishing trip. The concentration of 20 heavy metals was analyzed in 180 specimens of A. morisii and P. margaritifera collected around the three islands to test for inter-island differences for each species and metal. While both species showed geographical differences in metal concentrations, the main finding was that A. morisii could be a bioindicator species for metals such as Li, Sr and Ca. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors influencing alcohol safety action project police officers' DWI arrests

DOT National Transportation Integrated Search

1974-04-29

This report summarizes the results of a study to determine the factors influencing ASAP police officers' DWI arrests and the formulation of approaches to minimize the influence of those factors which might tend to constrain the arrest of persons who ...

Marketing Factors Influencing the Overall Satisfaction of Marriage Education Participants.

ERIC Educational Resources Information Center

Morris, Michael Lane; Cooper, Catherine; Gross, Kevin H.

1999-01-01

Seventy-one married couples attending marriage education workshops were surveyed regarding price, product, place, people, and promotional marketing factors influencing their overall satisfaction as workshop participants. Findings suggest both similar and unique marketing factors influenced husbands' and wives' satisfaction. Recommendations for…

Metal speciation in landfill leachates with a focus on the influence of organic matter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Claret, Francis, E-mail: f.claret@brgm.fr; Tournassat, Christophe; Crouzet, Catherine

Highlights: > This study characterises the heavy-metal content in leachates collected from eight landfills in France. > Most of the metals are concentrated in the <30 kDa fraction, while Pb, Cu and Cd are associated with larger particles. > Metal complexation with OM is not sufficient to explain apparent supersaturation of metals with sulphide minerals. - Abstract: This study characterises the heavy-metal content in leachates collected from eight landfills in France. In order to identify heavy metal occurrence in the different size fractions of leachates, a cascade filtration protocol was applied directly in the field, under a nitrogen gas atmospheremore » to avoid metal oxidation. The results of analyses performed on the leachates suggest that most of the metals are concentrated in the <30 kDa fraction, while lead, copper and cadmium show an association with larger particles. Initial speciation calculations, without considering metal association with organic matter, suggest that leachate concentrations in lead, copper, nickel and zinc are super-saturated with respect to sulphur phases. Speciation calculations that account for metal complexation with organic matter, considered as fulvic acids based on C1(s) NEXAFS spectroscopy, show that this mechanism is not sufficient to explain such deviation from equilibrium conditions. It is therefore hypothesized that the deviation results also from the influence of biological activity on the kinetics of mineral phase precipitation and dissolution, thus providing a dynamic system. The results of chemical analyses of sampled fluids are compared with speciation calculations and some implications for the assessment of metal mobility and natural attenuation in a context of landfill risk assessment are discussed.« less

DETERMINATION OF HEAVY METALS AND PESTICIDES IN GINSENG PRODUCTS

EPA Science Inventory

Medicinal plants may carry residuals of environmentally persistent pesticides or assimilate heavy metals in varying degrees. Several factors may influence contaminant accumulation, including species, level and duration of contaminant exposure, and topography. As part of a progra...

Thermal and Compositional Variation of Glassy Metal Structure Factors.

NASA Astrophysics Data System (ADS)

From, Milton

The x-ray total structure factor of the glassy -metal alloys Mg_{70}Zn_ {30}, Ca_{70}Mg_{30 } and Mg_{85.5}Cu _{14.5} has been measured at three temperatures: 9K, 150K, and 300K. The data have a statistical precision of about.8% and an absolute accuracy of roughly 3%. Percus-Yevick hard sphere structure factors may be fitted quite accurately to the data in the region of the first peak. In addition, the variation of the experimental structure factor with composition is found to be consistent with the Percus-Yevick theory. At low k values, Percus -Yevick and other theoretical model structure factors are in poor agreement with the data. Within experimental error, the temperature dependence of the structure factors is in agreement with the Debye plane wave phonon model of atomic vibrations. The measured structure factors are used to calculate the electrical resistivity from the Faber-Ziman equation. In most cases, the calculations yield both the correct magnitude of resistivity and sign of the temperature coefficient of resistivity.

Influence of heavy metal leaf contaminants on the in vitro growth of urban-tree phylloplane-fungi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, W.H.

1977-01-01

The surfaces of urban woody vegetation are contaminated with varying amounts of numerous metallic compounds, including Cd, Cu, Mn, Al, Cr, Ni, Fe, Pb, Na, and Zn. To examine the possibility that these metals may affect phylloplane fungi, the above cations were tested in vitro for their ability to influence the growth of numerous saprophytic and parasitic fungi isolated from the leaves of London plane trees. Considerable variation in growth inhibition by the metals was observed. Generally Aureobasidium pullulans, Epicoccum sp., and Phialophora verrucosa were relatively tolerant; Gnomonia platani, Cladsporium sp., and Pleurophomella sp. were intermediate; and Pestalotiopsis and Chaetomiummore » sp. were relatively sensitive to the incorporation of certain metals into solid and liquid media. If similar growth inhibitions occur in nature, competitive abilities or population structures of plant surface microbes may be altered by surface metal contamination. Metals causing the greatest and broadest spectrum growth suppression included Ni, Zn, Pb, Al, Fe, and Mn. 25 references, 4 figures.« less

Factors influencing arrests for alcohol-related traffic violations

DOT National Transportation Integrated Search

1974-09-01

This report describes factors that were found to influence police officers' arrests of persons suspected of alcohol-related (A/R) traffic violations, and presents recommendations for treating these factors so that a higher level of enforcement might ...

Spatial patterns of heavy metals in soil under different geological structures and land uses for assessing metal enrichments.

PubMed

Krami, Loghman Khoda; Amiri, Fazel; Sefiyanian, Alireza; Shariff, Abdul Rashid B Mohamed; Tabatabaie, Tayebeh; Pradhan, Biswajeet

2013-12-01

One hundred and thirty composite soil samples were collected from Hamedan county, Iran to characterize the spatial distribution and trace the sources of heavy metals including As, Cd, Co, Cr, Cu, Ni, Pb, V, Zn, and Fe. The multivariate gap statistical analysis was used; for interrelation of spatial patterns of pollution, the disjunctive kriging and geoenrichment factor (EF(G)) techniques were applied. Heavy metals and soil properties were grouped using agglomerative hierarchical clustering and gap statistic. Principal component analysis was used for identification of the source of metals in a set of data. Geostatistics was used for the geospatial data processing. Based on the comparison between the original data and background values of the ten metals, the disjunctive kriging and EF(G) techniques were used to quantify their geospatial patterns and assess the contamination levels of the heavy metals. The spatial distribution map combined with the statistical analysis showed that the main source of Cr, Co, Ni, Zn, Pb, and V in group A land use (agriculture, rocky, and urban) was geogenic; the origin of As, Cd, and Cu was industrial and agricultural activities (anthropogenic sources). In group B land use (rangeland and orchards), the origin of metals (Cr, Co, Ni, Zn, and V) was mainly controlled by natural factors and As, Cd, Cu, and Pb had been added by organic factors. In group C land use (water), the origin of most heavy metals is natural without anthropogenic sources. The Cd and As pollution was relatively more serious in different land use. The EF(G) technique used confirmed the anthropogenic influence of heavy metal pollution. All metals showed concentrations substantially higher than their background values, suggesting anthropogenic pollution.

Soil geochemical factors regulate Cd accumulation by metal hyperaccumulating Noccaea caerulescens (J. Presl & C. Presl) F.K. Mey in field-contaminated soils.

PubMed

Rosenfeld, Carla E; Chaney, Rufus L; Martínez, Carmen E

2018-03-01

Cadmium contamination in soil is a substantial global problem, and of significant concern due to high food-chain transfer. Cadmium hyperaccumulators are of particular interest because of their ability to tolerate and take up significant amounts of heavy metal pollution from soils. One particular plant, Noccaea caerulescens (formerly, Thlaspi caerulescens), has been extensively studied in terms of its capacity to accumulate heavy metals (specifically Zn and Cd), though these studies have primarily utilized hydroponic and metal-spiked model soil systems. We studied Cd and nutrient uptake by two N. caerulescens ecotypes, Prayon (Zn-only hyperaccumulator) and Ganges (Zn- and Cd-hyperaccumulator) in four long-term field-contaminated soils. Our data suggest that individual soil properties such as total soil Cd, Zn:Cd molar ratio, or soil pH do not accurately predict Cd uptake by hyperaccumulating plants. Additionally, total Cd uptake by the hyperaccumulating Ganges ecotype was substantially less than its physiological capacity, which is likely due to Cd-containing solid phases (primarily iron oxides) and pH that play an important role in regulating and limiting Cd solubility. Increased P accumulation in the Ganges leaves, and greater plant Fe accumulation from Cd-containing soils suggests that rhizosphere alterations via proton, and potentially organic acid, secretion may also play a role in nutrient and Cd acquisition by the plant roots. The current study highlights the role that soil geochemical factors play in influencing Cd uptake by hyperaccumulating plants. While these plants may have high physiological potential to accumulate metals from contaminated soils, individual soil geochemical factors and the plant-soil interactions in that soil will dictate the actual amount of phytoextractable metal. This underlines the need for site-specific understanding of metal-containing solid phases and geochemical properties of soils before undertaking phytoextraction efforts

Factors influencing health information system adoption in American hospitals.

PubMed

Wang, Bill B; Wan, Thomas T H; Burke, Darrell E; Bazzoli, Gloria J; Lin, Blossom Y J

2005-01-01

To study the number of health information systems (HISs), applicable to administrative, clinical, and executive decision support functionalities, adopted by acute care hospitals and to examine how hospital market, organizational, and financial factors influence HIS adoption. A cross-sectional analysis was performed with 1441 hospitals selected from metropolitan statistical areas in the United States. Multiple data sources were merged. Six hypotheses were empirically tested by multiple regression analysis. HIS adoption was influenced by the hospital market, organizational, and financial factors. Larger, system-affiliated, and for-profit hospitals with more preferred provider organization contracts are more likely to adopt managerial information systems than their counterparts. Operating revenue is positively associated with HIS adoption. The study concludes that hospital organizational and financial factors influence on hospitals' strategic adoption of clinical, administrative, and managerial information systems.

Maturity of hospital information systems: Most important influencing factors.

PubMed

Vidal Carvalho, João; Rocha, Álvaro; Abreu, António

2017-07-01

Maturity models facilitate organizational management, including information systems management, with hospital organizations no exception. This article puts forth a study carried out with a group of experts in the field of hospital information systems management with a view to identifying the main influencing factors to be included in an encompassing maturity model for hospital information systems management. This study is based on the results of a literature review, which identified maturity models in the health field and relevant influencing factors. The development of this model is justified to the extent that the available maturity models for the hospital information systems management field reveal multiple limitations, including lack of detail, absence of tools to determine their maturity and lack of characterization for stages of maturity structured by different influencing factors.

A Review of Factors Influencing Athletes' Food Choices.

PubMed

Birkenhead, Karen L; Slater, Gary

2015-11-01

Athletes make food choices on a daily basis that can affect both health and performance. A well planned nutrition strategy that includes the careful timing and selection of appropriate foods and fluids helps to maximize training adaptations and, thus, should be an integral part of the athlete's training programme. Factors that motivate food selection include taste, convenience, nutrition knowledge and beliefs. Food choice is also influenced by physiological, social, psychological and economic factors and varies both within and between individuals and populations. This review highlights the multidimensional nature of food choice and the depth of previous research investigating eating behaviours. Despite numerous studies with general populations, little exploration has been carried out with athletes, yet the energy demands of sport typically require individuals to make more frequent and/or appropriate food choices. While factors that are important to general populations also apply to athletes, it seems likely, given the competitive demands of sport, that performance would be an important factor influencing food choice. It is unclear if athletes place the same degree of importance on these factors or how food choice is influenced by involvement in sport. There is a clear need for further research exploring the food choice motives of athletes, preferably in conjunction with research investigating dietary intake to establish if intent translates into practice.

Influence of several metal ions on the gelation activation energy of silicon tetraethoxide

NASA Technical Reports Server (NTRS)

Bansal, Narottam P.

1988-01-01

The effects of nine metal cations (Li(+), Na(+), Mg(2+), Ca(2+), Sr(2+), Cu(2+), Al(3+), La(3+), and Y(3+) on silica gel formation has been investigated by studying the hydrolysis and polycondensation of silicon tetraethoxide (TEOS) in the presence of metal nitrates. The influence of water: TEOS mole ratio, metal ion concentration, and the reaction temperature has been investigated. The overall activation energy for gel formation has been determined from the temperature dependence of the time of gelation for each system. The activation energy for -Si-O-Si- network formation is found to be 54.5 kJ/mol. The gel formation time as well as the activation energy sharply increase in the presence of Cu(2+), Al(3+), La(3+) and Y(3+). In contrast, the presence of Li(+), Na(+), Mg(2+), Ca(2+), or, Sr(2+) lowers the gelation time, but has no appreciable effect on the activation energy. This difference may be attributed to the participation or nonparticipation of the metal ions in the formation of the three-dimensional polymeric network during the polycondensation step. The concentration of metal ion (Mg(2+), Ca(2+), Y(3+) or the water: TEOS mole ratio had no appreciable effect on the gelation activation energy. A simple test has been proposed to determine whether a metal ion would act as a network intermediate or modifier in silica and other glassy networks.

Supercritical Fluid Extraction of Metal Chelate: A Review.

PubMed

Ding, Xin; Liu, Qinli; Hou, Xiongpo; Fang, Tao

2017-03-04

Supercritical fluid extraction (SFE), as a new green extraction technology, has been used in extracting various metal species. The solubilities of chelating agents and corresponding metal chelates are the key factors which influence the efficiency of SFE. Other main properties of them such as stability and selectivity are also reviewed. The extraction mechanisms of mainly used chelating agents are explained by typical examples in this paper. This is the important aspect of SFE of metal ions. Moreover, the extraction efficiencies of metal species also depend on other factors such as temperature, pressure, extraction time and matrix effect. The two main complexation methods namely in-situ and on-line chelating SFE are described in detail. As an efficient chelating agent, tributyl phosphate-nitric acid (TBP-HNO 3 ) complex attracts much attention. The SFE of metal ions, lanthanides and actinides as well as organometallic compounds are also summarized. With the proper selection of ligands, high efficient extraction of metal species can be obtained. As an efficient sample analysis method, supercritical fluid chromatography (SFC) is introduced in this paper. Recently, the extraction method combining ionic liquids (ILs) with supercritical fluid has been becoming a novel technology for treating metal ions. The kinetics related to SFE of metal species is discussed with some specific examples.

Factors Influencing Teaching Choice in Turkey

ERIC Educational Resources Information Center

Kilinc, Ahmet; Watt, Helen M. G.; Richardson, Paul W.

2012-01-01

Why choose to become a teacher in Turkey? The authors examined motivations and perceptions among preservice teachers (N = 1577) encompassing early childhood, primary and secondary education. The Factors Influencing Teaching Choice (FIT-Choice) instrument was translated into Turkish and its construct validity and reliability assessed. Altruistic…

Factors Influencing Part-time Faculty Engagement With Online Nursing Programs.

PubMed

Reneau, Margaret; Wallace, Cara; Claywell, Lora; Price, Jill; Burdi, Melissa; Trybulski, Joanne

2018-03-28

This research investigated factors that influenced the engagement of part-time faculty teaching in online nursing programs with their institutions. Of the 257 part-time faculty surveyed, the most significant factor was being supported in decisions regarding student issues, followed by institutional commitment to quality online education. Compensation was moderately influential; a negative factor was requiring too frequent meetings. Understanding factors that influence the engagement of part-time faculty teaching in online nursing programs can help leaders of online programs attract and retain experienced, highly skilled faculty.

Influence of inorganic anions on metals release from oil sands coke and on toxicity of nickel and vanadium to Ceriodaphnia dubia.

PubMed

Puttaswamy, Naveen; Liber, Karsten

2012-02-01

In a previous study it was shown that pH significantly influences the release of metals from oil sands coke, particularly Ni and V which were identified as the cause of coke leachate toxicity. Coke comes in contact with oil sands process water (OSPW) during its transport to and long term storage in reclamation landscapes. However, the influence of dominant inorganic anions present in OSPW (i.e. HCO(3)(-), Cl(-) and SO(4)(2-)) on metals release from coke and on speciation and toxicity of Ni and V, has not been characterized before. Coke was subjected to a 15-d batch leaching process at four levels of HCO(3)(-), Cl(-) and SO(4)(2-) to determine the influence on metals release and speciation. Further, the effects of each of the three anions on Ni and V toxicity, as well as the mixture toxicity of Ni and V, were assessed using the three-brood Ceriodaphnia dubia test. Inorganic anions had a significant influence on the type and amount of metals released from coke. Specifically, sulfate increased the mobilization of cationic metals (e.g. Ni, Fe, Mn and Zn), whereas bicarbonate enhanced the release of oxyanion forming metals (e.g. Al, As, Mo and V) from coke. Chloride had no particular effect on the type and amount of metals released. With respect to toxicity, elevated bicarbonate levels decreased the 7-d Ni IC50 from 6.3 to 2.3 μg L(-1), whereas sulfate showed an ameliorative effect against V toxicity to C. dubia. In combination, Ni and V acted additively at their highest sub-lethal concentrations. Aqueous chemistry and toxicity of Ni and V are discussed with the goal of informing reclamation efforts at the Athabasca oil sands. Copyright © 2011 Elsevier Ltd. All rights reserved.

Factors That Influence the Practice of Elective Induction of Labor

PubMed Central

Moore, Jennifer; Low, Lisa Kane

2012-01-01

Elective induction of labor has been linked to increased rates of prematurity and rising rates of cesarean birth. The purpose of this investigation was to evaluate current trends in induction of labor scholarship focusing on evidence-based factors that influence the practice of elective induction. A key word search was conducted to identify studies on the practice of elective induction of labor. Analysis of the findings included clustering and identification of recurrent themes among the articles with 3 categories being identified. Under each category, the words/phrases were further clustered until a construct could be named. A total of 49 articles met inclusion criteria: 7 patient, 6 maternity care provider, and 4 organization factors emerged. Only 4 of the articles identified were evidence based. Patient factors were divided into preferences/convenience, communication, fear, pressure/influence, trust, external influences, and technology. Provider factors were then divided into practice preferences/convenience, lack of information, financial incentives, fear, patient desire/demand, and technology. Organization factors were divided into lack of enforcement/accountability, hospital culture, scheduling of staff, and market share issues. Currently, there is limited data-based information focused on factors that influence elective induction of labor. Despite patient and provider convenience/preferences being cited in the literature, the evidence does not support this practice. PMID:22843006

Changes in metallothionein concentrations in response to variation in natural factors (salinity, sex, weight) and metal contamination in crabs from a metal-rich estuary.

PubMed

Legras; Mouneyrac; Amiard; Amiard-Triquet; Rainbow

2000-04-05

Intermoult male and female crabs Pachygrapsus marmoratus and Carcinus maenas were sampled from three sites between the mouth and 25 km upstream in the Gironde, the most Cd-contaminated estuary in France, in order to study the relative importance of natural factors (salinity, sex, weight) and accumulated metal concentrations on metallothionein (MT) concentrations. In the two species studied, higher metal, total protein and MT concentrations were observed in the hepatopancreas than in the gills. In P. marmoratus, MT concentrations were mainly related to changes in the natural factors even if MT and Zn concentrations were positively correlated in the hepatopancreas whereas in C. maenas, the main relationships were with accumulated metal levels. In the case of the natural factors, the most important ones were weight in gills of both crab species, and salinity changes in both hepatopancreas and gills of P. marmoratus. Cd and Cu concentrations in both organs of the two species were inversely related to salinity. The same observation was found for Zn concentrations in C. maenas but not in P. marmoratus. In the hepatopancreas of both species, the highest total protein concentrations were found in crabs from the site with the highest salinity, whereas there were no such differences in the gills. It seems that changes in MT concentrations are linked more to changes in general protein metabolism than to changes in metal accumulation. Thus it was important to examine the storage of metals in other tissue compartments, particularly the insoluble fraction which includes mineral granules which is known to also contribute to trace metal detoxification in invertebrates. In the gills of the crabs, Zn was present mainly in the insoluble fraction, whereas Cd was nearly equally distributed between soluble and insoluble fractions. In contrast, Cu in the gills and all three metals in the hepatopancreas of both species were mainly cytosolic, but this does not necessarily imply a

Factors which influence necropsy requests: a psychological approach.

PubMed Central

Start, R. D.; Hector-Taylor, M. J.; Cotton, D. W.; Startup, M.; Parsons, M. A.; Kennedy, A.

1992-01-01

AIMS: To determine which factors influence a clinician's decision to request a necropsy. METHODS: Patient age, confidence in premortem diagnosis, relatives' attitudes, and conditions of necropsy practice were combined factorially (two levels each) in separate medical and surgical questionnaires based on clinical case histories. The interactions between the factors were measured by a repeated measures factorial analysis of variance for each of the two clinical groups. The influence of the clinician's interest in necropsies on these interactions was also examined by a similar method. RESULTS: Necropsies were more likely to be requested on young patients, when diagnostic confidence was low, and when relatives' attitudes were favourable. Conditions of necropsy practice did not affect the likelihood of a request and there was no apparent overall difference in necropsy requests between the two groups of clinicians. The "patient age" and "relatives" factors had less influence on the decision of the surgical group to request necropsy. This was attributed to the opportunity to "see for themselves" at operation and was supported by the finding that surgeons were very likely to request necropsies in the absence of surgical intervention. Clinicians from both groups with a high pre-existing interest in the necropsy were consistently more likely to request necropsies. CONCLUSIONS: The "case history" based questionnaires successfully measured the relative influence of multiple factors in relation to the decision of clinicians to request a necropsy. These findings suggest that any attempt to reverse the decline in necropsy rates should focus on changing the clinician's perception of the value of the modern necropsy. PMID:1556237

Factors influencing women's decisions about timing of motherhood.

PubMed

Benzies, Karen; Tough, Suzanne; Tofflemire, Karen; Frick, Corine; Faber, Alexandra; Newburn-Cook, Christine

2006-01-01

To examine the factors that influence women's decisions about the timing of motherhood from a life span perspective. Qualitative. Large Western Canadian city with a high rate of infants born to women aged 35 years and older. 45 Canadian women aged 20 to 48 years. Independence, a stable relationship, and declining fertility influenced women's decisions about the timing of motherhood. Women integrated child developmental transitions into a projected life plan as they considered the timing of motherhood. Partner readiness and family of origin influences played a lesser role. Delayed childbearing has become more socially acceptable, with subsequent negative connotations associated with younger motherhood. Parental benefits have limited influence on the timing of motherhood. Recognition by nurses of the various and complex factors that influence women's decisions about the timing of motherhood may flag the importance of pregnancy-related counseling for woman across the fertility life span. Policy decision makers must be cognizant of the need for additional high-risk obstetric and neonatal health services when societal norms encourage women to delay childbearing in favor of completing education and establishing a career. (c) 2006, AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses

The influence of metal speciation in combustion waste on the efficiency of Cu, Pb, Zn, Cd, Ni and Cr bioleaching in a mixed culture of sulfur-oxidizing and biosurfactant-producing bacteria.

PubMed

Karwowska, Ewa; Wojtkowska, Małgorzata; Andrzejewska, Dorota

2015-12-15

Metal leachability from ash and combustion slag is related to the physico-chemical properties, including their speciation in the waste. Metals speciation is an important factor that influences the efficiency of metal bioleaching from combustion wastes in a mixed culture of acidophilic and biosurfactant-producing bacteria. It was observed that individual metals tended to occur in different fractions, which reflects their susceptibility to bioleaching. Cr and Ni were readily removed from wastes when present with a high fraction bound to carbonates. Cd and Pb where not effectively bioleached when present in high amounts in a fraction bound to organic matter. The best bioleaching results were obtained for power plant slag, which had a high metal content in the exchangeable, bound to carbonates and bound to Fe and Mg oxides fractions- the metal recovery percentage for Zn, Cu and Ni from this waste exceeded 90%. Copyright © 2015 Elsevier B.V. All rights reserved.

Factors influencing internal color of cooked meats.

PubMed

Suman, Surendranath P; Nair, Mahesh N; Joseph, Poulson; Hunt, Melvin C

2016-10-01

This manuscript overviews the pertinent research on internal color of uncured cooked meats, biochemical processes involved in meat cookery, and fundamental mechanisms governing myoglobin thermal stability. Heat-induced denaturation of myoglobin, responsible for the characteristic dull-brown color of cooked meats, is influenced by a multitude of endogenous (i.e., pH, muscle source, species, redox state) and exogenous (i.e., packaging, ingredients, storage) factors. The interactions between these factors critically influence the internal cooked color and can confuse the consumers, who often perceive cooked color to be a reliable indicator for doneness and safety. While certain phenomena in cooked meat color are cosmetic in nature, others can mislead consumers and result in foodborne illnesses. Research in meat color suggests that processing technologies and cooking practices in industry as well as households influence the internal cooked color. Additionally, the guidelines of many international public health and regulatory authorities recommend using meat thermometers to determine safe cooking endpoint temperature and to ensure product safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

Including the spatial variability of metal speciation in the effect factor in life cycle impact assessment: Limits of the equilibrium partitioning method.

PubMed

Tromson, Clara; Bulle, Cécile; Deschênes, Louise

2017-03-01

In life cycle assessment (LCA), the potential terrestrial ecotoxicity effect of metals, calculated as the effect factor (EF), is usually extrapolated from aquatic ecotoxicological data using the equilibrium partitioning method (EqP) as it is more readily available than terrestrial data. However, when following the AMI recommendations (i.e. with at least enough species that represents three different phyla), there are not enough terrestrial data for which soil properties or metal speciation during ecotoxicological testing are specified to account for the influence of soil property variations on metal speciation when using this approach. Alternatively, the TBLM (Terrestrial Biotic Ligand Model) has been used to determine an EF that accounts for speciation, but is not available for metals; hence it cannot be consistently applied to metals in an LCA context. This paper proposes an approach to include metal speciation by regionalizing the EqP method for Cu, Ni and Zn with a geochemical speciation model (the Windermere Humic Aqueous Model 7.0), for 5213 soils selected from the Harmonized World Soil Database. Results obtained by this approach (EF EqP regionalized ) are compared to the EFs calculated with the conventional EqP method, to the EFs based on available terrestrial data and to the EFs calculated with the TBLM (EF TBLM regionalized ) when available. The spatial variability contribution of the EF to the overall spatial variability of the characterization factor (CF) has been analyzed. It was found that the EFs EqP regionalized show a significant spatial variability. The EFs calculated with the two non-regionalized methods (EqP and terrestrial data) fall within the range of the EFs EqP regionalized . The EFs TBLM regionalized cover a larger range of values than the EFs EqP regionalized but the two methods are not correlated. This paper highlights the importance of including speciation into the terrestrial EF and shows that using the regionalized EqP approach is not

Factors influencing warfarin control in Australia and Singapore.

PubMed

Bernaitis, Nijole; Ching, Chi Keong; Teo, Siew Chong; Chen, Liping; Badrick, Tony; Davey, Andrew K; Crilly, Julia; Anoopkumar-Dukie, Shailendra

2017-09-01

Warfarin is widely used for patients with non-valvular atrial fibrillation (NVAF). Variations in warfarin control, as measured by time in therapeutic range (TTR), have been reported across different regions and ethnicities, particularly between Western and Asian countries. However, there is limited data on comparative factors influencing warfarin control in Caucasian and Asian patients. Therefore, the aim of this study was to determine warfarin control and potential factors influencing this in patients with NVAF in Australia and Singapore. Retrospective data was collected for patients receiving warfarin for January to June 2014 in Australia and Singapore. TTR was calculated for individuals with mean patient TTR used for analysis. Possible influential factors on TTR were analysed including age, gender, concurrent co-morbidities, and concurrent medication. The mean TTR was significantly higher in Australia (82%) than Singapore (58%). At both sites, chronic kidney disease significantly lowered this TTR. Further factors influencing control were anaemia and age<60years in Australia, and vascular disease, CHA 2 DS 2 -VASc score of 6, and concurrent platelet inhibitor therapy in Singapore. Warfarin control was significantly higher in Australia compared to Singapore, however chronic kidney disease reduced control at both sites. The different levels of control in these two countries, together with patient factors further reducing control may impact on anticoagulant choice in these countries with better outcomes from warfarin in Australia compared to Singapore. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors influencing the purity of electronic grade phosphine delivered to MOCVD tools

NASA Astrophysics Data System (ADS)

Feng, Jun; Owens, Mitch; Raynor, Mark W.

2010-04-01

Increasing mobility of InP films with usage time of one PH 3 cylinder prompted an investigation into factors influencing the purity of delivered PH 3. The presence of hygroscopic H xPO y residues in a delivery system greatly increases the dry-down time compared to that of a clean system. Static delivery system tests show increasing H 2O concentration with time and twice the increase in PH 3 versus N 2 over 48 h indicating reaction of metal oxides in components with PH 3 to generate H 2O. Gas purity may also vary during cylinder usage. Depletion of a high-purity PH 3 cylinder shows consistently low gas phase H 2O levels before phase-break but increasing levels after phase-break, as the cylinder depressurizes. The results highlight the importance of using pure PH 3, employing rigorous cycle-purging procedures to prevent H xPO y contamination, switching out cylinders in good time and using purification technology to control H 2O.

Factors Influencing Career Aspirations of Primary and Secondary Grade Students.

ERIC Educational Resources Information Center

Canale, Joseph R.; Dunlap, Linda L.

Many studies have examined factors influencing the career aspirations of high school students, but little has been done to explore this issue with primary school students. This study investigated factors that might influence the career aspirations of children across a broad age spectrum. Students (N=150) from grades 2, 5, 8, and 12 completed…

Factors influencing selection of office furniture by corporations and universities

Treesearch

R. Bruce Anderson

1976-01-01

Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

Cerebrospinal Fluid Pressure: Revisiting Factors Influencing Optic Nerve Head Biomechanics

PubMed Central

Hua, Yi; Voorhees, Andrew P.; Sigal, Ian A.

2018-01-01

Purpose To model the sensitivity of the optic nerve head (ONH) biomechanical environment to acute variations in IOP, cerebrospinal fluid pressure (CSFP), and central retinal artery blood pressure (BP). Methods We extended a previously published numerical model of the ONH to include 24 factors representing tissue anatomy and mechanical properties, all three pressures, and constraints on the optic nerve (CON). A total of 8340 models were studied to predict factor influences on 98 responses in a two-step process: a fractional factorial screening analysis to identify the 16 most influential factors, followed by a response surface methodology to predict factor effects in detail. Results The six most influential factors were, in order: IOP, CON, moduli of the sclera, lamina cribrosa (LC) and dura, and CSFP. IOP and CSFP affected different aspects of ONH biomechanics. The strongest influence of CSFP, more than twice that of IOP, was on the rotation of the peripapillary sclera. CSFP had similar influence on LC stretch and compression to moduli of sclera and LC. On some ONHs, CSFP caused large retrolamina deformations and subarachnoid expansion. CON had a strong influence on LC displacement. BP overall influence was 633 times smaller than that of IOP. Conclusions Models predict that IOP and CSFP are the top and sixth most influential factors on ONH biomechanics. Different IOP and CSFP effects suggest that translaminar pressure difference may not be a good parameter to predict biomechanics-related glaucomatous neuropathy. CON may drastically affect the responses relating to gross ONH geometry and should be determined experimentally. PMID:29332130

Influence of rare earth content on Mm-based AB 5 metal hydride alloys for Ni-MH batteries-An X-ray fluorescence study

NASA Astrophysics Data System (ADS)

Ananth, M. V.; Raju, M.; Manimaran, K.; Balachandran, G.; Nair, Lekshmi M.

AB 5-type MH alloys with Mm (Misch metal) as the A part (with varied rare earth contents in Mm) were investigated for rare earth by XRF analysis and battery performance by life cycle tests with an objective of understanding the influence of rare earth content on electrochemical hydrogen storage. The La/Ce ratio was found to vary from 0.51 to 18.73. The capacity output varied between 179 and 266 mAh g -1. The results show that the La/Ce ratio has a strong influence on the performance, with the best performance realized with samples having an La/Ce ratio of around 12. La enhancement facilitates easy activation due to refinement in grain size and interstitial dimensions. Also, an orderly influence on crystalline structure could be seen. The study demonstrates that the rare earth content is an essential factor in determining the maximum capacity output because of its influence on crystal orientation as well as an increase in the radius of the interstitials, lattice constants and cell volumes.

Factors That Influence Technology Integration in the Classroom

ERIC Educational Resources Information Center

Montgomery, Maureen C.

2017-01-01

Education is one area where the use of technology has had great impact on student learning. The integration of technology in teaching and learning can significantly influence the outcome of education in the classroom. However, there are a myriad of factors that influence technology integration in the classroom. The purpose of this study was to…

Factors influencing the, selection of state office furniture

Treesearch

R. Bruce Anderson; R. Bruce Anderson

1973-01-01

Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

Relative importance of natural and anthropogenic factors influencing karst rocky desertification

NASA Astrophysics Data System (ADS)

Xu, Erqi; Zhang, Hongqi

2017-04-01

As the most severe ecological issue in southwest China, karst rocky desertification (KRD) has both threatened and constrained regional sustainable development. Comprehensively understanding the relationship between the evolution of KRD and relevant driving data would provide more information to combat KRD in such complex karst environments. Past studies have been limited in quantifying the relative importance of driving factors influencing fine-scale KRD evolution, and have also lacked insight into their interactive impacts. To address these issues, we have used geographical information system techniques and a geographical detector model to explore the spatial consistency of driving factors and their interactions in relation to the evolution of KRD. Changshun County in China was selected as a representative area for the study. Nine relevant driving factors, including both natural and anthropogenic factors, were studied in regard to their relationships with KRD transformation between 2000 and 2010. Our results demonstrate the relative importance of driving data in influencing the improvement and deterioration of KRD. Lithology, soil type and road influence are identified as the leading factors. Interestingly, to our study at least, there is no significant difference between the impacts of natural and anthropogenic factors influencing KRD improvement, and even natural factors have a higher impact on KRD deterioration. Factors were found to enhance the influence of each other for KRD transformation. In particular, the results show a non-linearly enhanced effect between driving factors, which significantly aggravates KRD. New information found in our study helps to effectively control and restore areas afflicted by KRD.

Factors that influence women's health in Tanzania.

PubMed

Lugina, H I

1994-01-01

A descriptive account of factors that influence women's health in Tanzania is given. The social and cultural processes that enhance or undermine women's health are emphasized. Recommendations for changes to improve women's health are made.

Psychosocial factors for influencing healthy aging in adults in Korea.

PubMed

Han, KyungHun; Lee, YunJung; Gu, JaSung; Oh, Hee; Han, JongHee; Kim, KwuyBun

2015-03-07

Healthy aging includes physical, psychological, social, and spiritual well-being in later years. The purpose of this study is to identify the psychosocial factors influencing healthy aging and examining their socio-demographic characteristics. Perceived health status, depression, self-esteem, self-achievement, ego-integrity, participation in leisure activities, and loneliness were identified as influential factors in healthy aging. 171 Korean adults aged between 45 and 77 years-old participated in the study. Self-reporting questionnaires were used, followed by descriptive statistics and multiple regressions as inferential statistical analyses. There were significant differences between participants' general characteristics: age, education, religion, housing, hobby, and economic status. The factors related to healthy aging had positive correlation with perceived health status, self-esteem, self-achievements, and leisure activities, and negative correlation with depression and loneliness. The factors influencing healthy aging were depression, leisure activities, perceived health status, ego integrity, and self-achievements. These factors were able to explain 51.9%. According to the results, depression is the factor with the greatest influence on healthy aging. Perceived health status, ego integrity, self-achievement, self-esteem, participation of leisure activities were also influential on healthy aging as beneficial factors.

A brief review of salient factors influencing adult eating behaviour.

PubMed

Emilien, Christine; Hollis, James H

2017-12-01

A better understanding of the factors that influence eating behaviour is of importance as our food choices are associated with the risk of developing chronic diseases such as obesity, CVD, type 2 diabetes or some forms of cancer. In addition, accumulating evidence suggests that the industrial food production system is a major contributor to greenhouse gas emission and may be unsustainable. Therefore, our food choices may also contribute to climate change. By identifying the factors that influence eating behaviour new interventions may be developed, at the individual or population level, to modify eating behaviour and contribute to society's health and environmental goals. Research indicates that eating behaviour is dictated by a complex interaction between physiology, environment, psychology, culture, socio-economics and genetics that is not fully understood. While a growing body of research has identified how several single factors influence eating behaviour, a better understanding of how these factors interact is required to facilitate the developing new models of eating behaviour. Due to the diversity of influences on eating behaviour this would probably necessitate a greater focus on multi-disciplinary research. In the present review, the influence of several salient physiological and environmental factors (largely related to food characteristics) on meal initiation, satiation (meal size) and satiety (inter-meal interval) are briefly discussed. Due to the large literature this review is not exhaustive but illustrates the complexity of eating behaviour. The present review will also highlight several limitations that apply to eating behaviour research.

Alternative Administrative Certification: Socializing Factors Influencing Program Choice

ERIC Educational Resources Information Center

Bickmore, Dana L.; Bickmore, Steven T.; Raines, Sarah

2013-01-01

This study used an organizational socialization lens to examine factors influencing participants' decision to pursue the principalship and choice to engage in an alternate administration certification program. Through an analysis of participant focus groups and interviews, factors emerged from the codes that were compared with dimensions of…

Experimental investigation on V isotope equilibrium fractionation factor between metal and silicate melt

NASA Astrophysics Data System (ADS)

Zhang, S.; Zhang, H.; Huang, F.

2017-12-01

Equilibrium fractionation factors of stable isotopes between metal and silicate melt are of vital importance for understanding the isotope variations within meteorites and planetary bodies. The V isotope composition (reported as δ51V = 1000 × [(51V/50Vsample/51V/50VAA)-1] ) of the bulk silicate Earth (BSE) has been estimated as δ51V = -0.7 ± 0.2‰ (2sd) [1], which is significantly heavier than most meteorites by 1‰ [2]. Such isotopic offset may provide insights for the core formation and core-mantle segregation. Therefore, it is important to understand V isotope equilibrium fractionation factor between silicate melt and metal. Nielsen et al. (2014) [2] had performed 3 experiments using starting materials of pure Fe metal and An50Di28Fo22 composition, revealing no resolvable V isotope fractionation. However, it is not clear whether chemical compositions in the melts can affect V isotope fractionations. Therefore, we experimentally calibrated equilibrium V isotope fractionation between Fe metallic and basaltic melt, with particular focus on the effect of Ni and other light elements. Experiments were performed at 1 GPa and 1600 oC using a 3/4″ end-loaded piston cylinder. The starting materials consisted of 1:1 mixture of pure Fe metal and basaltic composition [3]. The isotope equilibrium was assessed using time series experiments combined with the reverse reaction method. Carbon saturation and C-free experiments were achieved by using graphite and silica capsules, respectively. The Ni series experiments were doped with 6 wt% Ni into the starting Fe metal. The metal and silicate phases of samples were mechanically separated, V was purified using a chromatographic technique, and V isotope ratios were measured using MC-ICP-MS [4]. Carbon saturation, C-free experiments and Ni series experiment all show non-resolvable V isotope fractionation between metal and basaltic melt, which indicates that the presence of C and Ni could not affect V isotope fractionation

Modelling of gas-metal arc welding taking into account metal vapour

NASA Astrophysics Data System (ADS)

Schnick, M.; Fuessel, U.; Hertel, M.; Haessler, M.; Spille-Kohoff, A.; Murphy, A. B.

2010-11-01

The most advanced numerical models of gas-metal arc welding (GMAW) neglect vaporization of metal, and assume an argon atmosphere for the arc region, as is also common practice for models of gas-tungsten arc welding (GTAW). These models predict temperatures above 20 000 K and a temperature distribution similar to GTAW arcs. However, spectroscopic temperature measurements in GMAW arcs demonstrate much lower arc temperatures. In contrast to measurements of GTAW arcs, they have shown the presence of a central local minimum of the radial temperature distribution. This paper presents a GMAW model that takes into account metal vapour and that is able to predict the local central minimum in the radial distributions of temperature and electric current density. The influence of different values for the net radiative emission coefficient of iron vapour, which vary by up to a factor of hundred, is examined. It is shown that these net emission coefficients cause differences in the magnitudes, but not in the overall trends, of the radial distribution of temperature and current density. Further, the influence of the metal vaporization rate is investigated. We present evidence that, for higher vaporization rates, the central flow velocity inside the arc is decreased and can even change direction so that it is directed from the workpiece towards the wire, although the outer plasma flow is still directed towards the workpiece. In support of this thesis, we have attempted to reproduce the measurements of Zielińska et al for spray-transfer mode GMAW numerically, and have obtained reasonable agreement.

Factors Influencing the Fatigue Strength of Materials

NASA Technical Reports Server (NTRS)

Bollenrath, F

1941-01-01

A number of factors are considered which influence the static and fatigue strength of materials under practical operating conditions as contrasted with the relations obtaining under conditions of the usual testing procedure. Such factors are interruptions in operation, periodically fluctuating stress limits and mean stresses with periodic succession of several groups and stress states, statistical changes and succession of stress limits and mean stresses, frictional corrosion at junctures, and notch effects.

How modifiable factors influence parental decision-making about organ donation.

PubMed

Luberda, Kamila; Cleaver, Karen

2017-11-07

A global shortage of organs from children and adults available for transplantation is compounded by the failure of next of kin to consent for organs to be donated after death. Non-modifiable and modifiable factors influence decision-making in this area. Modifiable factors are of interest when examining families' decision-making about the donation of organs from their deceased child. A scoping review was undertaken to determine how modifiable factors influence parental decision-making about organ donation. Thematic analysis identified two themes: interactions with healthcare professionals and pre-disposition to organ donation. Satisfaction with experiences of hospital care, the information provided and the way it was communicated, as well as interactions pertaining to emotional support were all found to be modifiable factors that influenced decision making. Likewise, a predisposition to organ donation and knowing the deceased's wishes were associated with the consent decision. Nurses working in critical care environments need to be able to support parents during this difficult time. This article aims to raise awareness of modifiable factors that influence parental decision-making, highlighting their relevance for children's nursing practice. ©2017 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

Influence of multi-industrial activities on trace metal contamination: an approach towards surface water body in the vicinity of Dhaka Export Processing Zone (DEPZ).

PubMed

Ahmed, Golam; Miah, M Arzu; Anawar, Hossain M; Chowdhury, Didarul A; Ahmad, Jasim U

2012-07-01

Industrial wastewater discharged into aquatic ecosystems either directly or because of inadequate treatment of process water can increase the concentrations of pollutants such as toxic metals and others, and subsequently deteriorate water quality, environmental ecology and human health in the Dhaka Export Processing Zone (DEPZ), the largest industrial belt of 6-EPZ in Bangladesh. Therefore, in order to monitor the contamination levels, this study collected water samples from composite effluent points inside DEPZ and the surrounding surface water body connected to effluent disposal sites and determined the environmental hazards by chemical analysis and statistical approach. The water samples were analysed by inductively coupled plasma mass spectrometry to determine 12 trace metals such as As, Ag, Cr, Co, Cu, Li, Ni, Pb, Se, Sr, V and Zn in order to assess the influence of multi-industrial activities on metal concentrations. The composite effluents and surface waters from lagoons were characterized by a strong colour and high concentrations of biochemical oxygen demand, chemical oxygen demand, electrical conductivity, pH, total alkalinity, total hardness, total organic carbon, Turb., Cl(-), total suspended solids and total dissolved solids, which were above the limit of Bangladesh industrial effluent standards, but dissolved oxygen concentration was lower than the standard value. The measurement of skewness and kurtosis values showed asymmetric and abnormal distribution of the elements in the respective phases. The mean trend of variation was found in a decreasing order: Zn > Cu > Sr > Pb > Ni > Cr > Li > Co > V > Se > As > Ag in composite industrial effluents and Zn > Cu > Sr > Pb > Ni > Cr > Li > V > As > Ag > Co > Se in surface waters near the DEPZ. The strong correlations between effluent and surface water metal contents indicate that industrial wastewaters discharged from DEPZ have a strong influence on the contamination of the surrounding water bodies by toxic

Influence of Temporary Cements on the Bond Strength of Self-Adhesive Cement to the Metal Coronal Substrate.

PubMed

Peixoto, Raniel Fernandes; De Aguiar, Caio Rocha; Jacob, Eduardo Santana; Macedo, Ana Paula; De Mattos, Maria da Gloria Chiarello; Antunes, Rossana Pereira de Almeida

2015-01-01

This research evaluated the influence of temporary cements (eugenol-containing [EC] or eugenol-free [EF]) on the tensile strength of Ni-Cr copings fixed with self-adhesive resin cement to the metal coronal substrate. Thirty-six temporary crowns were divided into 4 groups (n=9) according to the temporary cements: Provy, Dentsply (eugenol-containing), Temp Cem, Vigodent (eugenol-containing), RelyX Temp NE, 3M ESPE (eugenol-free) and Temp Bond NE, Kerr Corp (eugenol-free). After 24 h of temporary cementation, tensile strength tests were performed in a universal testing machine at a crosshead speed of 0.5 mm/min and 1 kN (100 kgf) load cell. Afterwards, the cast metal cores were cleaned by scraping with curettes and air jet. Thirty-six Ni-Cr copings were cemented to the cast metal cores with self-adhesive resin cement (RelyX U200, 3M ESPE). Tensile strength tests were performed again. In the temporary cementation, Temp Bond NE (12.91 ± 2.54) and Temp Cem (12.22 ± 2.96) presented the highest values of tensile strength and were statistically similar to each other (p>0.05). Statistically significant difference (p<0.05) was observed only between Provy (164.44 ± 31.23) and Temp Bond NE (88.48 ± 21.83) after cementation of Ni-Cr copings with self-adhesive resin cement. In addition, Temp Cem (120.68 ± 48.27) and RelyX Temp NE (103.04 ± 26.09) showed intermediate tensile strength values. In conclusion, the Provy eugenol-containing temporary cement was associated with the highest bond strength among the resin cements when Ni-Cr copings were cemented to cast metal cores. However, the eugenol cannot be considered a determining factor in increased bond strength, since the other tested cements (1 eugenol-containing and 2 eugenol-free) were similar.

Revision surgery of metal-on-metal hip arthroplasties for adverse reactions to metal debris.

PubMed

Matharu, Gulraj S; Eskelinen, Antti; Judge, Andrew; Pandit, Hemant G; Murray, David W

2018-06-01

Background and purpose - The initial outcomes following metal-on-metal hip arthroplasty (MoMHA) revision surgery performed for adverse reactions to metal debris (ARMD) were poor. Furthermore, robust thresholds for performing ARMD revision are lacking. This article is the second of 2. The first article considered the various investigative modalities used during MoMHA patient surveillance (Matharu et al. 2018a ). The present article aims to provide a clinical update regarding ARMD revision surgery in MoMHA patients (hip resurfacing and large-diameter MoM total hip arthroplasty), with specific focus on the threshold for performing ARMD revision, the surgical strategy, and the outcomes following revision. Results and interpretation - The outcomes following ARMD revision surgery appear to have improved with time for several reasons, among them the introduction of regular patient surveillance and lowering of the threshold for performing revision. Furthermore, registry data suggest that outcomes following ARMD revision are influenced by modifiable factors (type of revision procedure and bearing surface implanted), meaning surgeons could potentially reduce failure rates. However, additional large multi-center studies are needed to develop robust thresholds for performing ARMD revision surgery, which will guide surgeons' treatment of MoMHA patients. The long-term systemic effects of metal ion exposure in patients with these implants must also be investigated, which will help establish whether there are any systemic reasons to recommend revision of MoMHAs.

Comparison of metallothionein concentrations and tissue distribution of trace metals in crabs (Pachygrapsus marmoratus) from a metal-rich estuary, in and out of the reproductive season.

PubMed

Mouneyrac, C; Amiard-Triquet, C; Amiard, J C; Rainbow, P S

2001-07-01

Crabs, Pachygrapsus marmoratus, were sampled in June 1997 and February 1998 from two sites (at the mouth and 25 km upstream) in the metal-rich Gironde estuary, France. Gills and hepatopancreas were analysed for metal (Cd, Cu, Zn) and metallothionein (MT) contents, in order to examine the influence of both biological and environmental factors on the physico-chemical forms of detoxified metal storage in the crabs. The concentrations of MT and both cytosolic and insoluble metals were not greatly different between males and females, and the influence of organ weights was also minimal. Intersite differences were observed, probably resulting from the gradient of salinity in the estuary, which interacts with both the chemical speciation and bioavailability of metals, and the general protein metabolism of the crabs. Seasonal changes were also important, probably in interaction with the moult and reproductive cycles. In February, concentrations of insoluble metals were generally higher than in June, in both organs, suggesting that essential metals, particularly Zn, are stored during winter then remobilised during the breeding season. The natural variability in the concentrations of MT often concealed any relationship with accumulated metal concentrations. Thus MT in crabs cannot be considered as a useful biomarker of metal pollution.

Merging black hole binaries: the effects of progenitor's metallicity, mass-loss rate and Eddington factor

NASA Astrophysics Data System (ADS)

Giacobbo, Nicola; Mapelli, Michela; Spera, Mario

2018-03-01

The first four gravitational wave events detected by LIGO were all interpreted as merging black hole binaries (BHBs), opening a new perspective on the study of such systems. Here we use our new population-synthesis code MOBSE, an upgraded version of BSE, to investigate the demography of merging BHBs. MOBSE includes metallicity-dependent prescriptions for mass-loss of massive hot stars. It also accounts for the impact of the electron-scattering Eddington factor on mass-loss. We perform >108 simulations of isolated massive binaries, with 12 different metallicities, to study the impact of mass-loss, core-collapse supernovae and common envelope on merging BHBs. Accounting for the dependence of stellar winds on the Eddington factor leads to the formation of black holes (BHs) with mass up to 65 M⊙ at metallicity Z ˜ 0.0002. However, most BHs in merging BHBs have masses ≲ 40 M⊙. We find merging BHBs with mass ratios in the 0.1-1.0 range, even if mass ratios >0.6 are more likely. We predict that systems like GW150914, GW170814 and GW170104 can form only from progenitors with metallicity Z ≤ 0.006, Z ≤ 0.008 and Z ≤ 0.012, respectively. Most merging BHBs have gone through a common envelope phase, but up to ˜17 per cent merging BHBs at low metallicity did not undergo any common envelope phase. We find a much higher number of mergers from metal-poor progenitors than from metal-rich ones: the number of BHB mergers per unit mass is ˜10-4 M_{⊙}^{-1} at low metallicity (Z = 0.0002-0.002) and drops to ˜10-7 M_{⊙}^{-1} at high metallicity (Z ˜ 0.02).

Calcium uptake in aquatic insects: influences of phylogeny and metals (Cd and Zn).

PubMed

Poteat, Monica D; Buchwalter, David B

2014-04-01

Calcium sequestration in the hypo-osmotic freshwater environment is imperative in maintaining calcium homeostasis in freshwater aquatic organisms. This uptake process is reported to have the unintended consequence of potentially toxic heavy metal (Cd, Zn) uptake in a variety of aquatic species. However, calcium uptake remains poorly understood in aquatic insects, the dominant invertebrate faunal group in most freshwater ecosystems. Here, we examined Ca uptake and interactions with heavy metals (Cd, Zn) at low ambient Ca levels (12.5 μmol l(-1)) in 12 aquatic insect species within Ephemerellidae (mayfly) and Hydropsychidae (caddisfly), two families differentially responsive to trace metal pollution. We found Ca uptake varied 70-fold across the 12 species studied. Body mass and clade (family) were found to significantly influence both Ca uptake and adsorption (P≤0.05). Zn and Cd uptake rate constants (ku) exhibited a strong correlation (r=0.96, P<0.0001), suggesting a shared transport system. Ca uptake failed to significantly correlate with either Zn or Cd ku values. Further, neither Zn nor Cd exhibited inhibitory effects toward Ca uptake. In fact, we saw evidence of modest stimulation of Ca uptake rates in some metal treatments. This work suggests that insects generally differ from other freshwater taxa in that aqueous Ca uptake does not appear to be compromised by Cd or Zn exposure. It is important to understand the trace metal and major ion physiology of aquatic insects because of their ecological importance and widespread use as ecological indicators.

The factors influencing urinary arsenic excretion and metabolism of workers in steel and iron smelting foundry.

PubMed

Shuhua, Xi; Qingshan, Sun; Fei, Wang; Shengnan, Liu; Ling, Yan; Lin, Zhang; Yingli, Song; Nan, Yan; Guifan, Sun

2014-01-01

In order to evaluate the degree of arsenic (As) exposure and the factors influencing urinary As excretion and metabolism, 192 workers from a steel and iron smelting plant, with different type of work in production such as roller, steel smelting, iron smelting and metallic charge preparation, were recruited. Information about characteristics of each subject was obtained by questionnaire and inorganic As (iAs), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA) in urine were determined. The results showed that steel smelters had significantly higher concentrations of DMA and total As (TAs) than rollers and metallic charge preparation workers, and iron and steel smelters had a higher value of primary methylation index and lower proportion of the iAs (iAs%) than rollers and metallic charge preparation workers. In steel smelters, urinary As level exceeded the biological exposure index (BEI) limit for urinary As of 35 μg/l by 65.52%, and higher than metallic charge preparation workers (35.14%). The individuals consumed seafood in recent 3 days had a higher TAs than the individuals without seafood consumption. Multivariate logistic regression analysis showed that different jobs, taken Chinese medicine of bezoar and seafood consumption in recent 3 days were significantly associated with urinary TAs exceeded BEI limit value 35 μg/l. Our results suggest that workers in steel and iron smelting plant had a lower level of As exposure, and seafood consumption and taking Chinese medicine of bezoar also could increase the risk of urinary TAs exceeded BEI limit value.

Influence of life history and sex on metal accumulation in two beetle species (insecta: Coleoptera)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lindqvist, L.; Block, M.

1997-04-01

Insects are important components of most terrestrial environments owing to their great abundance, biomass and diversity. They also make up an important food resource for other animals. Consequently, in many food webs insects constitute important links in metal-transport chains between trophic levels. Therefore trace-metal concentrations in insects have an important influence on the trace-metal distribution in the biosphere. In various insects, Cd, Cu and Zn are usually accumulated to the extent that they reach levels above those of the food, whereas Fe is not. In response to metal pollution, accumulation of nonessential metals was found to increase markedly, whereas essentialmore » metals accumulated less owing to regulating mechanisms in the insects. In polluted environments, metal concentrations were found to be higher in predatory invertebrates than in phytophagous ones in studies where insects were analysed in broad categories such as families. However, no such trend was observed when species were treated separately. The pattern of metal accumulation can differ between species. This is true even for species utilizing the same food resource. For instance, concentrations of Cd, Cu and Fe differed between four species of sawflies feeding on pine needles from the same locality. It is therefore likely that insects with different food sources accumulate metals differently depending on the concentration and chemical form of the metals in the food. There have been few studies aimed at determining whether patterns of metal accumulation differ between males and females of the same species. In one such study on the sawfly Neodiprion sertifer concentrations of Cd, Cu and Fe tended to be higher in males than in females. However, this pattern was not found in two other sawfly species. Target organs for Cd were found to differ between males and females in the grasshopper Aiolopus thalassinus. The testis accumulated Cd to a higher degree than the ovaries.« less

Factors influencing laser cutting of wood

Treesearch

V.G. Barnekov; C.W. McMillin; H.A. Huber

1986-01-01

Factors influencing the ability of lasers to cut wood may be generally classified into these three areas: 1) characteristics of the laser beam; 2) equipment and processing variables; and 3) properties of the workpiece. Effects of beam power, mode, polarization, and stability are discussed as are aspects of optics, location of focal point, feed speed, gas-jet assist...

Review on Factors Influencing Physician Guideline Adherence in Cardiology.

PubMed

Hoorn, C J G M; Crijns, H J G M; Dierick-van Daele, A T M; Dekker, L R C

2018-04-09

Cardiovascular disease is the most common cause of death in Western countries. Physician adherence to guidelines is often suboptimal, resulting in impaired patient outcome and prognosis. Multiple studies have been conducted to evaluate patterns and the influencing factors of patient adherence, but little is known about factors influencing physician guideline adherence. This review aims to identify factors influencing physician guideline adherence relevant to cardiology and to provide insights and suggestions for future improvement. Physician adherence was measured as adherence to standard local medical practice and applicable guidelines. Female gender and older age had a negative effect on physician guideline adherence. In addition, independent of the type of heart disease, physicians without cardiologic specialization were linked to physician noncompliance. Also, guideline adherence in primary care centers was at a lower level compared to secondary or tertiary care centers. The importance of guideline adherence increases as patients age, and complex diseases and comorbidity arise. Appropriate resources and interventions, taking important factors for nonadherence in account, are necessary to improve guideline adoption and adherence in every level of the chain. This in turn should improve patient outcome.

Librarians' Perspectives on the Factors Influencing Research Data Management Programs

ERIC Educational Resources Information Center

Faniel, Ixchel M.; Connaway, Lynn Silipigni

2018-01-01

This qualitative research study examines librarians' research data management (RDM) experiences, specifically the factors that influence their ability to support researchers' needs. Findings from interviews with 36 academic library professionals in the United States identify 5 factors of influence: (1) technical resources; (2) human resources; (3)…

Influence of strain and metal thickness on metal-MoS₂ contacts.

PubMed

Saidi, Wissam A

2014-09-07

MoS2 and other transition metal dichalcogenides are considered as potential materials in many applications including future electronics. A prerequisite for these applications is to understand the nature of the MoS2 contact with different metals. We use semi-local density functional theory in conjunction with dispersion corrections to study the heterostructures composed of Pd and Pt monolayers with (111) orientation grown pseudomorphically on MoS2(001). The interface properties are mapped as a function of the number of deposited overlayers, as well as a function of tensile and compressive strains. Although we show that the dependence of the contacts on strain can be fully explained using the d-band model, we find that their evolution with the number of deposited metal layers is markedly different between Pd and Pt, and at variance with the d-band model. Specifically, the Pt/MoS2 heterostructures show an anomalous large stability with the deposition of two metal monolayers for all investigated strains, while Pd/MoS2 exhibits a similar behavior only for compressive strains. It is shown that the results can be rationalized by accounting for second-nearest-neighbor effect that couples MoS2 with the subsurface metal layers. The underpinnings of this behavior are attributed to the larger polarizability and cohesive energy of Pt compared to Pd, that leads to a larger charge-response in the subsurface layers.

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

NASA Astrophysics Data System (ADS)

Gupta, Nidhi; Fischer, Arnout R. H.; van der Lans, Ivo A.; Frewer, Lynn J.

2012-05-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

[Influencing factors in preparation of brucine liposomes by ammonium sulfate transmembrane gradients].

PubMed

Wang, Wei; Chen, Jun; Cai, Bao-Chang; Fang, Yun

2008-09-01

To study the influencing factors in preparation of brucine liposomes by ammonium sulfate transmembrane gradients. The brucine liposomes were separated by Sephadex G-50, and the influence of various factors on the entrapment efficiencies were investigated. The entrapment efficiency was enhanced by increased ammonium sulfate concentration, ethanol volume and PC concentration. Burcine liposomes prepared by ammonium sulfate transmembrance gradients can get a high entrapment efficiency, the main influencing factors were ammonium sulfate concentration, ethanol volume and PC concentration.

Use of wastewater ER sludges for the immobilization of heavy metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macha, S.; Murray, D.; Urasa, I.T.

1996-10-01

The distribution, mobility, and bioavailability of heavy metals in soils, surface water, and ground water have been of major interest and concern from both environmental and geochemical standpoints. Wastewater sludges represent an important anthropogenic factor whose impact on these processes is not fully understood. In the past, incineration and landfilling were common practices for discarding wastewater sludges. However, as local and state laws governing the disposal of these materials have become more stringent, land application has been used as an alternative. Reported studies have shown that the impact of land application of sludges can vary widely and is influenced bymore » a number of factors, including the source of the sludge; the organic matter content of the sludge; the form in which the sludge is applied; and the prevailing conditions of the receiving soils. It has also been shown that sewage sludge can have solubilizing effects on solid-phase heavy metals, thereby causing geochemical shifts of the insoluble fractions of metals to the more soluble forms. The work presented in this paper utilized synthetic minerals, standard solutions, sludges, and agricultural soils obtained from different sources to determine the mechanisms involved in the mineralization of heavy metals by sludge; the influence of soil conditions; interelemental effects; the influence of natural organic matter; and possible microbial activity that may come into play. Several types of sludge were evaluated for lead binding capacity.« less

Factors influencing return to work after illness in France.

PubMed

Pélissier, C; Fontana, L; Chauvin, F

2014-01-01

Few studies have been published about the factors influencing return to work after sickness absence. To identify medical and occupational factors influencing the type of fitness certificate given by occupational physicians before employees return to work after sickness absence. A cross-sectional study was undertaken over 3 months in several health services in France. Workers undergoing a medical examination before returning to work after a period of sickness absence of at least 3 weeks were included. Medical and occupational factors were collected using a questionnaire. The relationship between different factors and certification of fitness was assessed by univariate and multivariate analyses. Among the 402 workers included, 64% were considered fit to return to work. Being older, strenuous work, prolonged sick leave and fear of returning to work appeared to be negative factors influencing the return to a previous job. In contrast, having an education level higher than secondary school, being satisfied at work, perception of very good health and benefitting from satisfactory professional relationships appeared to favour return to work. We developed a predictive score of not being fit to return to work after illness. Our study highlighted the relationship between medical and occupational factors with problems returning to work. The predictive score may be used by occupational physicians as a screening tool to identify those who are likely to have difficulties returning to work after illness, so that their working conditions can be modified to take this into consideration.

Metal-based nanoparticle interactions with the nervous system: The challenge of brain entry and the risk of retention in the organism

EPA Science Inventory

This review of metal and metal-oxide based nanoparticles focuses on factors that influence their distribution into the nervous system, evidence that they enter brain parenchyma, and nervous system responses. Emphasis is placed on gold as a model metal-based nanoparticle and for r...

Stakeholder Perceptions of Governance: Factors Influencing Presidential Perceptions of Board Effectiveness

ERIC Educational Resources Information Center

Proper, Eve; Willmer, Wesley K.; Hartley, Harold V., III; Caboni, Timothy C.

2009-01-01

This article examines the factors that influence presidents' perceptions of board effectiveness in relation to their boards' fundraising role. Data from a survey of small college presidents are used to see what factors influence each of four areas of satisfaction: deciding policy, making financial contributions, referring donor prospects and…

Factors influencing the food choices of Irish children and adolescents: a qualitative investigation.

PubMed

Fitzgerald, Amanda; Heary, Caroline; Nixon, Elizabeth; Kelly, Colette

2010-09-01

Food choices established during childhood and adolescence tend to persist into adulthood with consequences for long-term health. Yet, to date, relatively little research has examined factors that influence the food choices of children and adolescents from their perspectives. In this article, previous research is extended by examining developmental differences between children's and adolescents' perceptions of factors influencing their food choices. Focus group discussions were conducted with 29 young people from three age groups (9-10, 13-14 and 16-18 years). An inductive thematic analysis identified three key factors as influencing food choices. These factors included intra-individual factors: the link between food preferences and awareness of healthy eating; intra-familial factors: the role of the home food environment; and extra-familial factors: eating away from the home. Findings indicate that there were developmental differences between children's and adolescents' perceptions of factors influencing food choice. Among adolescents, parental control began to diminish and adolescents exercised increased autonomy over their food choices compared with children. To develop effective nutrition interventions, it is important to gather child and adolescent input regarding factors perceived as influencing their food choices.

Assesment of influncing factors on mechanical and electrical properties of Al/Cu joints

NASA Astrophysics Data System (ADS)

Selvaraj, R. Meby; Hynes, N. Rajesh Jesudoss

2018-05-01

Joining of dissimilar materials opens up challenging opportunities in todays technology. Al/Cu weldments are used in applications that demands corrosion resistance, thermal and electrical conducting properties. In dissimilar joining mechanical and thermal properties result in large stress gradients during heating. The Al-Cu joints are lighter, cheaper and have conductivity equal to copper alloy. The main scope of this study is to assess the influencing factors of Al/Cu joints in mechanical and electrical properties. It includes the influence of the dilution between the base metals, influence of physical properties, influence of welding parameters, influence of filler metal, influence of heat treatment, and influence of electrical properties

Intrinsic factors influencing help-seeking behaviour in an acute stroke situation.

PubMed

Zock, Elles; Kerkhoff, Henk; Kleyweg, Ruud Peter; van de Beek, Diederik

2016-09-01

The proportion of stroke patients eligible for intravenous or intra-arterial treatment is still limited because many patients do not seek medical help immediately after stroke onset. The aim of our study was to explore which intrinsic factors and considerations influence help-seeking behaviour of relatively healthy participants, confronted with stroke situations. Semi-structured interviews were conducted with 25 non-stroke participants aged 50 years or older. We presented 5 clinical stroke situations as if experienced by the participants themselves. Recognition and interpretation of symptoms were evaluated and various factors influencing help-seeking behaviour were explored in-depth. We used the thematic synthesis method for data analysis. Five themes influencing help-seeking behaviour in a stroke situation were identified: influence of knowledge, views about seriousness, ideas about illness and health, attitudes towards others and beliefs about the emergency medical system. A correct recognition of stroke symptoms or a correct interpretation of the stroke situations did not automatically result in seeking medical help. Interestingly, similar factors could lead to different types of actions between participants. Many intrinsic, as well as social and environmental factors are of influence on help-seeking behaviour in an acute stroke situation. All these factors seem to play a complex role in help-seeking behaviour with considerable inter-individual variations. Accomplishing more patients eligible for acute stroke treatment, future research should focus on better understanding of all factors at various levels grounded in a theory of help-seeking behaviour.

From Hospital to Nursing Facility: Factors Influencing Decisions

ERIC Educational Resources Information Center

Mason, Susan E.; Auerbach, Charles; LaPorte, Heidi Heft

2009-01-01

This study addresses the factors influencing decisions to send medicine-surgical (med-surg) patients home or to nursing facilities (NFs). The sample (n = 7,852) was taken from a large, urban, teaching, med-surg unit where discharges were documented and data collected over a two-and-a-half-year period. Using logistical regression, the factors found…

Professional Identity Development in Higher Education: Influencing Factors

ERIC Educational Resources Information Center

Barbarà-i-Molinero, Alba; Cascón-Pereira, Rosalía; Hernández-Lara, Ana beatriz

2017-01-01

Purpose: In the last few years, the interest on professional identity development (PID) and the factors that influence PID has become central in higher education (HE) literature. However, the knowledge developed in this domain has focussed on a factor at a time and on a degree or discipline, thus being difficult to have a general picture of all…

Computer Self-Efficacy and Factors Influencing E-Learning Effectiveness

ERIC Educational Resources Information Center

Chien, Tien-Chen

2012-01-01

Purpose: The purpose of this study is to investigate the influences of system and instructor factors on e-learning effectiveness under the interactions of computer self-efficacy. In this study, the factors of the e-learning system are functionality, interaction, and response. The factors of the e-learning instructor are attitude, technical skills,…

Recent advances in nanoscale-metal assisted biochar derived from waste biomass used for heavy metals removal.

PubMed

Ho, Shih-Hsin; Zhu, Shishu; Chang, Jo-Shu

2017-12-01

Pollution of heavy metals (HMs) is a detrimental treat to human health and need to be cleaned up in a proper way. Biochar (BC), a low-cost and "green" adsorbent, has attracted significant attention due to its considerable HMs removal capacity. In particular, nano-metals have recently been used to assist BC in improving its reactivity, surface texture and magnetism. Synthesis methods and metal precursors greatly influence the properties and structures of the nanocomposites, thereby affecting their HMs removal performance. This review presents advances in synthesis methods, formation mechanisms and surface characteristics of BC nanocomposites, along with the discussions on HMs removal mechanisms and the effects of environmental factors on HMs removal efficiency. Performance of using BC nanocomposites to remediate real HMs-containing wastewater and issues associated with its process scale-up are also discussed. This review aims to provide useful information to facilitate the development of HMs removal by nanoscale-metal assisted BC. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors Influencing Intrinsic Motivation towards Physical Activity.

ERIC Educational Resources Information Center

Rutherford, William J.; And Others

1992-01-01

Study examined factors that influenced intrinsic motivation toward physical activity in 60 adult males who completed questionnaires and physical fitness tests. Results showed that performance information given immediately after task performance increased perceived competence and intrinsic motivation levels toward exercise of individuals with…

Factors influencing woodlands of southwestern North Dakota

Treesearch

Michele M. Girard; Harold Goetz; Ardell J. Bjugstad

1987-01-01

Literature pertaining to woodlands of southwestern North Dakota is reviewed. Woodland species composition and distribution, and factors influencing woodland ecosystems such as climate, logging, fire, and grazing are described. Potential management and improvement techniques using vegetation and livestock manipulation have been suggested.

What Motivational Factors Influence African American Males to Enter a Doctorial Program

ERIC Educational Resources Information Center

Humphreys, Phillip

2010-01-01

Purpose: The purpose of this study was to determine the motivational factors that influence African American men to enter a doctoral program by identifying the motivational factors that influenced them to enter a doctorial program. The findings were compared to Dr. Gloria J. Hill's dissertation study (2005), "What Motivational Factors Influence…

Trace metal dynamics in floodplain soils of the river Elbe: a review.

PubMed

Schulz-Zunkel, Christiane; Krueger, Frank

2009-01-01

This paper reviews trace metal dynamics in floodplain soils using the Elbe floodplains in Germany as an example of extraordinary importance because of the pollution level of its sediments and soils. Trace metal dynamics are determined by processes of retention and release, which are influenced by a number of soil properties including pH value, redox potential, organic matter, type and amount of clay minerals, iron-, manganese- and aluminum-oxides. Today floodplains act as important sinks for contaminants but under changing hydraulic and geochemical conditions they may also act as sources for pollutants. In floodplains such changes may be extremes in flooding or dry periods that particularly lead to altered redox potentials and that in turn influence the pH value, the mineralization of organic matter as well as the charge of the pedogenic oxides. Such reactions may affect the bioavailability of trace metals in soils and it can be clearly seen that the bioavailability of metals is an important factor for estimating trace metal remobilization in floodplain soils. However as bioavailability is not a constant factor, there is still a lack of quantification of metal mobilization particularly on the basis of changing geochemical conditions. Moreover, mobile amounts of metals in the soil solution do not indicate to which extent remobilized metals will be transported to water bodies or plants and therefore potentially have toxicological effects. Consequently, floodplain areas still need to be taken into consideration when studying the role and behavior of sediments and soils for transporting pollutants within river systems, particularly concerning the Water Framework Directive.

The Metallicity Dependence of the CO → H2 Conversion Factor in z >= 1 Star-forming Galaxies

NASA Astrophysics Data System (ADS)

Genzel, R.; Tacconi, L. J.; Combes, F.; Bolatto, A.; Neri, R.; Sternberg, A.; Cooper, M. C.; Bouché, N.; Bournaud, F.; Burkert, A.; Comerford, J.; Cox, P.; Davis, M.; Förster Schreiber, N. M.; Garcia-Burillo, S.; Gracia-Carpio, J.; Lutz, D.; Naab, T.; Newman, S.; Saintonge, A.; Shapiro, K.; Shapley, A.; Weiner, B.

2012-02-01

We use the first systematic samples of CO millimeter emission in z >= 1 ''main-sequence'' star-forming galaxies to study the metallicity dependence of the conversion factor αCO, from CO line luminosity to molecular gas mass. The molecular gas depletion rate inferred from the ratio of the star formation rate (SFR) to CO luminosity, is ~1 Gyr-1 for near-solar metallicity galaxies with stellar masses above M S ~ 1011 M ⊙. In this regime, the depletion rate does not vary more than a factor of two to three as a function of molecular gas surface density or redshift between z ~ 0 and 2. Below M S the depletion rate increases rapidly with decreasing metallicity. We argue that this trend is not caused by starburst events, by changes in the physical parameters of the molecular clouds, or by the impact of the fundamental-metallicity-SFR-stellar mass relation. A more probable explanation is that the conversion factor is metallicity dependent and that star formation can occur in ''CO-dark'' gas. The trend is also expected theoretically from the effect of enhanced photodissociation of CO by ultraviolet radiation at low metallicity. From the available z ~ 0 and z ~ 1-3 samples we constrain the slope of the log(αCO)-log (metallicity) relation to range between -1 and -2, fairly insensitive to the assumed slope of the gas-SFR relation. Because of the lower metallicities near the peak of the galaxy formation activity at z ~ 1-2 compared to z ~ 0, we suggest that molecular gas masses estimated from CO luminosities have to be substantially corrected upward for galaxies below M S. Based on observations with the Plateau de Bure millimetre interferometer, operated by the Institute for Radio Astronomy in the Millimetre Range (IRAM), which is funded by a partnership of INSU/CNRS (France), MPG (Germany), and IGN (Spain).

Factors influencing the intention to watch online video advertising.

PubMed

Lee, Joonghwa; Lee, Mira

2011-10-01

This study examines the factors influencing consumer intention to watch online video ads, by applying the theory of reasoned action. The attitude toward watching online video ads, the subjective norm, and prior frequency of watching online video ads positively influence the intention to watch online video ads. Further, beliefs held about entertainment and information outcomes from watching online video ads and subjective norm influence attitude toward watching these ads.

Political and economic factors influencing contraceptive uptake.

PubMed

Sai, F T

1993-01-01

International, national and local level politics influence the uptake of contraception through consensuses, laws, financial and moral support or the creation of an enabling atmosphere. Opposition to contraception generally comes from some churches and groups opposed to particular technologies. Socio-economic factors, particularly education, the health care system and the perceived or actual cost of fertility regulation as compared to benefits expected from children also powerfully influence contraceptive use. For many poor women in developing countries their powerlessness in relation to their male partners is an important obstacle.

Factors Influencing Professional Help-Seeking for Suicidality.

PubMed

Han, Jin; Batterham, Philip J; Calear, Alison L; Randall, Rebecca

2018-05-01

Evidence suggests that the majority of people with suicidality do not seek help. Little systematic evaluation of factors influencing professional help-seeking has been done. To systematically evaluate the factors that influence professional help-seeking for suicidality. Published quantitative and qualitative studies in Medline and PsycInfo databases were reviewed following PRISMA. In all, 55 relevant studies were identified. Of these, 15 studies examined professional help-seeking intentions for perceived suicidal ideation, among people with or without suicidality; 21 studies examined professional help-seeking behavior among people with suicidality; and 19 studies examined suicidal decedents' health services use. Several potential important barriers were identified including high self-reliance, lack of perceived need for treatment, and stigmatizing attitudes toward suicide, toward mental health issues, and toward seeking professional treatment. The presence of suicidality and mental health issues was found to generally decrease help-seeking intentions for perceived suicidal ideation while facilitating actual service use. Social support and informal support from family and friends also played an important role in professional help-seeking. Although the majority of the included studies were of sound quality, some of the factors identified in the review were assessed in relatively few studies, and most of the included studies were conducted in industrialized countries. Further quantitative and qualitative studies examining the potential important factors in broader community samples, especially in developing countries, are needed.

Factors influencing acceptance of technology for aging in place: a systematic review.

PubMed

Peek, Sebastiaan T M; Wouters, Eveline J M; van Hoof, Joost; Luijkx, Katrien G; Boeije, Hennie R; Vrijhoef, Hubertus J M

2014-04-01

To provide an overview of factors influencing the acceptance of electronic technologies that support aging in place by community-dwelling older adults. Since technology acceptance factors fluctuate over time, a distinction was made between factors in the pre-implementation stage and factors in the post-implementation stage. A systematic review of mixed studies. Seven major scientific databases (including MEDLINE, Scopus and CINAHL) were searched. Inclusion criteria were as follows: (1) original and peer-reviewed research, (2) qualitative, quantitative or mixed methods research, (3) research in which participants are community-dwelling older adults aged 60 years or older, and (4) research aimed at investigating factors that influence the intention to use or the actual use of electronic technology for aging in place. Three researchers each read the articles and extracted factors. Sixteen out of 2841 articles were included. Most articles investigated acceptance of technology that enhances safety or provides social interaction. The majority of data was based on qualitative research investigating factors in the pre-implementation stage. Acceptance in this stage is influenced by 27 factors, divided into six themes: concerns regarding technology (e.g., high cost, privacy implications and usability factors); expected benefits of technology (e.g., increased safety and perceived usefulness); need for technology (e.g., perceived need and subjective health status); alternatives to technology (e.g., help by family or spouse), social influence (e.g., influence of family, friends and professional caregivers); and characteristics of older adults (e.g., desire to age in place). When comparing these results to qualitative results on post-implementation acceptance, our analysis showed that some factors are persistent while new factors also emerge. Quantitative results showed that a small number of variables have a significant influence in the pre-implementation stage. Fourteen out of

Factors in Client–Clinician Interaction That Influence Hearing Aid Adoption

PubMed Central

Jennings, Mary Beth; Shaw, Lynn; Meston, Christine N.; Cheesman, Margaret F.

2011-01-01

The influence of client–clinician interactions has not been emphasized in hearing health care, despite the extensive evidence of the impact of the provider–patient interaction on health outcomes. The purpose of this study was to identify factors in the client–clinician interaction that may influence hearing aid adoption. Thirteen adults who had received a hearing aid recommendation within the previous 3 months and 10 audiologists participated in a study to generate, sort, and rate the importance of factors in client–clinician interaction that may influence the hearing aid purchase decision. A concept mapping approach was used to define meaningful clusters of factors. Quantitative analysis and qualitative interpretation of the statements resulted in eight concepts. The concepts in order of their importance are (a) Ensuring client comfort, (b) Understanding and meeting client needs, (c) Client-centered traits and actions, (d) Acknowledging client as an individual, (e) Imposing undue pressure and discomfort, (f) Conveying device information by clinician, (g) Supporting choices and shared decision making, and (h) Factors in client readiness. Two overarching themes of client-centered interaction and client empowerment were identified. Results highlight the influence of the client–clinician interaction in hearing aid adoption and suggest the possibility of improving hearing aid adoption by empowering clients through a client-centered interaction. PMID:22155784

Profiling contextual factors which influence safety in heavy vehicle industries.

PubMed

Edwards, Jason R D; Davey, Jeremy; Armstrong, Kerry A

2014-12-01

A significant proportion of worker fatalities within Australia result from truck-related incidents. Truck drivers face a number of health and safety concerns. Safety culture, viewed here as the beliefs, attitudes and values shared by an organisation's workers, which interact with their surrounding context to influence behaviour, may provide a valuable lens for exploring safety-related behaviours in heavy vehicle operations. To date no major research has examined safety culture within heavy vehicle industries. As safety culture provides a means to interpret experiences and generate behaviour, safety culture research should be conducted with an awareness of the context surrounding safety. The current research sought to examine previous health and safety research regarding heavy vehicle operations to profile contextual factors which influence health and safety. A review of 104 peer-reviewed papers was conducted. Findings of these papers were then thematically analysed. A number of behaviours and scenarios linked with crashes and non-crash injuries were identified, along with a selection of health outcomes. Contextual factors which were found to influence these outcomes were explored. These factors were found to originate from government departments, transport organisations, customers and the road and work environment. The identified factors may provide points of interaction, whereby culture may influence health and safety outcomes. Copyright © 2014. Published by Elsevier Ltd.

Evaluation of metal removal efficiency and its influence in the physicochemical parameters at two sewage treatment plants.

PubMed

Pipi, Angelo R F; Magdalena, Aroldo G; Giafferis, Giselda P; da Silva, Gustavo H R; Piacenti-Silva, Marina

2018-04-03

In sewage treatment plants, physicochemical parameters are highly controlled since treated sewage can be returned to water bodies or reused. In addition, pollutants such as heavy metals also deserve attention due to their potential toxicity. In general, these characteristics of sewage and treated water are evaluated independently, with the support of Brazilian legislation that does not require a routine for the analysis of metals as frequent as for the physicochemical parameters. In this work, 66 samples of raw sewage, treated sewage, and effluents from two treatment plants in the city of Bauru, São Paulo, Brazil, were evaluated to assess the efficiency of the treatment plants in the removal of metals. In addition, the influence of these pollutants on the quantification of physicochemical parameters was evaluated. The quantification of metals was performed using inductively coupled plasma optical spectroscopy (ICP-OES), and Spearman's test was applied to evaluate correlation between physicochemical parameters and metal content. The main metals found in the samples were Ba, Mn, Zn, Cu, Se, Fe, and Al. The results indicate that concentrations of metals in the aquatic environment can significantly affect the physicochemical parameters, since high concentrations of metals can interfere mainly in the pH, chemical oxygen demand, and dissolved oxygen.

Epitaxially influenced boundary layer model for size effect in thin metallic films

NASA Astrophysics Data System (ADS)

Bažant, Zdeněk P.; Guo, Zaoyang; Espinosa, Horacio D.; Zhu, Yong; Peng, Bei

2005-04-01

It is shown that the size effect recently observed by Espinosa et al., [J. Mech. Phys. Solids51, 47 (2003)] in pure tension tests on free thin metallic films can be explained by the existence of a boundary layer of fixed thickness, located at the surface of the film that was attached onto the substrate during deposition. The boundary layer is influenced by the epitaxial effects of crystal growth on the dislocation density and texture (manifested by prevalent crystal plane orientations). This influence is assumed to cause significantly elevated yield strength. Furthermore, the observed gradual postpeak softening, along with its size independence, which is observed in short film strips subjected to pure tension, is explained by slip localization, originating at notch-like defects, and by damage, which can propagate in a stable manner when the film strip under pure tension is sufficiently thin and short. For general applications, the present epitaxially influenced boundary layer model may be combined with the classical strain-gradient plasticity proposed by Gao et al., [J. Mech. Phys. Solids 47, 1239 (1999)], and it is shown that this combination is necessary to fit the test data on both pure tension and bending of thin films by one and the same theory. To deal with films having different crystal grain sizes, the Hall-Petch relation for the yield strength dependence on the grain size needs to be incorporated into the combined theory. For very thin films, in which a flattened grain fills the whole film thickness, the Hall-Petch relation needs a cutoff, and the asymptotic increase of yield strength with diminishing film thickness is then described by the extension of Nix's model of misfit dislocations by Zhang and Zhou [J. Adv. Mater. 38, 51 (2002)]. The final result is a proposal of a general theory for strength, size effect, hardening, and softening of thin metallic films.

Analysis of factors influencing organic fruit and vegetable purchasing in Istanbul, Turkey.

PubMed

Oraman, Yasemin; Unakitan, Gökhan

2010-01-01

This article examines the influences on the purchasing decisions of fruit and vegetable consumers and presents findings from a survey conducted with 385 respondents living in urban areas in Istanbul, Turkey. It uses a binary logistic model to estimate factor effects in organic fruit and vegetable purchasing in Turkey. The results indicate that concern for human health and safety is a key factor that influences consumer preferences for organic food. Findings will help organic product suppliers understand the key factors influencing consumer purchasing and consumption behaviors.

Do ion levels in hip resurfacing differ from metal-on-metal THA at midterm?

PubMed

Moroni, A; Savarino, L; Hoque, M; Cadossi, M; Baldini, N

2011-01-01

Metal-on-metal Birmingham hip resurfacing (MOM-BHR) is an alternative to metal-on-metal total hip arthroplasty (MOM-THA), especially for young and/or active patients. However, wear resulting in increased serum ion levels is a concern. We asked whether (1) serum chromium (Cr), cobalt (Co), and molybdenum (Mo) concentrations would differ between patients with either MOM-BHR or MOM-THA at 5 years, (2) confounding factors such as gender would influence ion levels; and (3) ion levels would differ at 2 and 5 years for each implant type. Ions were measured in two groups with either MOM-BHR (n = 20) or MOM-THA (n = 35) and a mean 5-year followup, and two groups with either MOM-BHR (n = 15) or MOM-THA (n = 25) and a mean 2-year followup. Forty-eight healthy blood donors were recruited for reference values. At 5 years, there were no differences in ion levels between patients with MOM-BHR or MOM-THA. Gender was a confounding factor, and in the MOM-BHR group at 5 years, Cr concentrations were greater in females compared with those of males. Mean ion levels were similar in patients with 2 and 5 years of followup for each implant type. Ion levels in patients were sevenfold to 10-fold higher than in controls. As the metal ion concentrations in the serum at 5 years were in the range reported in the literature, we do not believe concerns regarding excessive metal ion levels after MOM-BHR are justified. Level III, therapeutic study. See the Guidelines for Authors for a complete description of level of evidence.

Influence of metallic dental implants and metal artefacts on dose calculation accuracy.

PubMed

Maerz, Manuel; Koelbl, Oliver; Dobler, Barbara

2015-03-01

Metallic dental implants cause severe streaking artefacts in computed tomography (CT) data, which inhibit the correct representation of shape and density of the metal and the surrounding tissue. The aim of this study was to investigate the impact of dental implants on the accuracy of dose calculations in radiation therapy planning and the benefit of metal artefact reduction (MAR). A second aim was to determine the treatment technique which is less sensitive to the presence of metallic implants in terms of dose calculation accuracy. Phantoms consisting of homogeneous water equivalent material surrounding dental implants were designed. Artefact-containing CT data were corrected using the correct density information. Intensity-modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) plans were calculated on corrected and uncorrected CT data and compared to 2-dimensional dose measurements using GafChromic™ EBT2 films. For all plans the accuracy of dose calculations is significantly higher if performed on corrected CT data (p = 0.015). The agreement of calculated and measured dose distributions is significantly higher for VMAT than for IMRT plans for calculations on uncorrected CT data (p = 0.011) as well as on corrected CT data (p = 0.029). For IMRT and VMAT the application of metal artefact reduction significantly increases the agreement of dose calculations with film measurements. VMAT was found to provide the highest accuracy on corrected as well as on uncorrected CT data. VMAT is therefore preferable over IMRT for patients with metallic implants, if plan quality is comparable for the two techniques.

Microbial Influences on Trace Metal Cycling in a Meromictic Lake, Fayetteville Green Lake, NY

NASA Astrophysics Data System (ADS)

Zerkle, A. L.; House, C.; Kump, L.

2002-12-01

dominant microorganisms to influence trace metal cycling and bioavailability in the FGL water column.

Pakistani medical students' specialty preference and the influencing factors.

PubMed

Rehman, Anis; Rehman, Tariq; Shaikh, Muhammad Ateeb; Yasmin, Haleema; Asif, Ammara; Kafil, Hina

2011-07-01

To elucidate the specialty preferences of Pakistani medical students and the factors which influence medical students to make the decision regarding which specialty to pursue. Both basic sciences and clinical students from four medical colleges of Pakistan, i.e., Dow Medical College, Sindh Medical College, Liaquat National Medical College and Muhammad Medical College, were included in the cross-sectional survey during the period of July 2008 to Jan' 2009. After ethical acceptance, data was collected using convenient sampling technique. The questionnaire covered the following demographic details: 13 common specialties and 15 influencing factors. Questionnaires included in the analysis were 771. Most students gave preference to surgery and its associated sub-specialties (50.3%) followed by internal medicine (26.8%), paediatrics (23.2%), dermatology (16.7%), gynaecology and obstetrics (16.7%), psychiatry (13.1%), radiology (10.8%), ENT (8.8%), anaesthesiology (8.7%), administrative medicine (8.6%), orthopaedics (8.2%), ophthalmology (7.5%), and laboratory medicine (6.1%). The highly considered factors (regarding specialties) chosen by 70% of the medical students were: applicable to respective personalities of the individuals, prestige and respect, international opportunities, and time commitment. Surgical-skills, job availability, financial rating, academic performance, and a role model were moderately influencing factors. Hospital environment, parents, general practice, peer-pressure and personal health were the least influential. This trend suggests competition in surgery and its sub-specialties along with internal medicine, paediatrics, dermatology, gynaecology and obstetrics. Specialty suited to personality, time commitment, prestige/respect and international opportunity, influenced more than 70% of the students.

Influence of the Size and Structural Factors on the Magnetism of Multilayer Films Based on 3 d and 4 f Metals

NASA Astrophysics Data System (ADS)

Svalov, A. V.; Vas'kovskiy, V. O.; Kurlyandskaya, G. V.

2017-12-01

This work has presented some data on the layer structuring of films of 3 d and 4 f metals and their alloys, which have potential for practical use in magnetic sensors. The decrease in the thickness of magnetic layers with this structuring entails natural worsening of the crystallinity and leads to a degradation of magnetic ordering. However, the manifestation of these tendencies depends to a great extent on the conditions of preparation, the composition, and the sequence of the deposition of the contacting layers in the multilayer structures. The combination of these factors makes it possible to realize an optimum composition and optimum structural states of the films, which in a number of cases lead to the appearance of new combinations of functional properties.

Moisture Influence Reducing Method for Heavy Metals Detection in Plant Materials Using Laser-Induced Breakdown Spectroscopy: A Case Study for Chromium Content Detection in Rice Leaves.

PubMed

Peng, Jiyu; He, Yong; Ye, Lanhan; Shen, Tingting; Liu, Fei; Kong, Wenwen; Liu, Xiaodan; Zhao, Yun

2017-07-18

Fast detection of heavy metals in plant materials is crucial for environmental remediation and ensuring food safety. However, most plant materials contain high moisture content, the influence of which cannot be simply ignored. Hence, we proposed moisture influence reducing method for fast detection of heavy metals using laser-induced breakdown spectroscopy (LIBS). First, we investigated the effect of moisture content on signal intensity, stability, and plasma parameters (temperature and electron density) and determined the main influential factors (experimental parameters F and the change of analyte concentration) on the variations of signal. For chromium content detection, the rice leaves were performed with a quick drying procedure, and two strategies were further used to reduce the effect of moisture content and shot-to-shot fluctuation. An exponential model based on the intensity of background was used to correct the actual element concentration in analyte. Also, the ratio of signal-to-background for univariable calibration and partial least squared regression (PLSR) for multivariable calibration were used to compensate the prediction deviations. The PLSR calibration model obtained the best result, with the correlation coefficient of 0.9669 and root-mean-square error of 4.75 mg/kg in the prediction set. The preliminary results indicated that the proposed method allowed for the detection of heavy metals in plant materials using LIBS, and it could be possibly used for element mapping in future work.

Factors influencing training transfer in nursing profession: a qualitative study.

PubMed

Ma, Fang; Bai, Yangjing; Bai, Yangjuan; Ma, Weiguang; Yang, Xiangyu; Li, Jiping

2018-03-20

There is a growing recognition that training is not translated into performance and the 'transfer problem' exists in organization training today. Although factors contributing to training transfer have been identified in business and industry, the factors influencing training transfer in nursing profession remain less clear. A qualitative descriptive study was undertaken in two tertiary referral hospitals in China from February 2013 to September 2013. Purposeful sampling of 24 nursing staffs were interviewed about the factors influencing training transfer. Seven themes evolved from the analysis, categorized in 4 main domains, which described the factors influencing training transfer in nursing profession in trainee characteristics, training design, work environment and profession domain. The trainee characteristics domain included attitude and ability. The training design domain included training content and instruction method. The work environment domain included supports as facilitators and opposition as hindrance. The theme pertaining to the profession domain was professional development. Health care managers need to understand the factors influencing training transfer for maximizing the benefits of training. The right beliefs and values about training, the rigorous employee selection for training, the relevance of training content, training instructions facilitating learning and transfer, supports from peer, supervisors and the organization, organizational culture such as change, sharing, learning and support, and professional development are key to successful training transfer. Furthermore, managers should be aware of the opposition from co-workers and find ways to prevent it.

Factors influencing antibiotic prescribing in long-term care facilities: a qualitative in-depth study.

PubMed

van Buul, Laura W; van der Steen, Jenny T; Doncker, Sarah M M M; Achterberg, Wilco P; Schellevis, François G; Veenhuizen, Ruth B; Hertogh, Cees M P M

2014-12-16

Insight into factors that influence antibiotic prescribing is crucial when developing interventions aimed at a more rational use of antibiotics. We examined factors that influence antibiotic prescribing in long-term care facilities, and present a conceptual model that integrates these factors. Semi-structured qualitative interviews were conducted with physicians (n = 13) and nursing staff (n = 13) in five nursing homes and two residential care homes in the central-west region of the Netherlands. An iterative analysis was applied to interviews with physicians to identify and categorize factors that influence antibiotic prescribing, and to integrate these into a conceptual model. This conceptual model was triangulated with the perspectives of nursing staff. The analysis resulted in the identification of six categories of factors that can influence the antibiotic prescribing decision: the clinical situation, advance care plans, utilization of diagnostic resources, physicians' perceived risks, influence of others, and influence of the environment. Each category comprises several factors that may influence the decision to prescribe or not prescribe antibiotics directly (e.g. pressure of patients' family leading to antibiotic prescribing) or indirectly via influence on other factors (e.g. unfamiliarity with patients resulting in a higher physician perceived risk of non-treatment, in turn resulting in a higher tendency to prescribe antibiotics). Our interview study shows that several non-rational factors may affect antibiotic prescribing decision making in long-term care facilities, suggesting opportunities to reduce inappropriate antibiotic use. We developed a conceptual model that integrates the identified categories of influencing factors and shows the relationships between those categories. This model may be used as a practical tool in long-term care facilities to identify local factors potentially leading to inappropriate prescribing, and to subsequently

Influence of sewage sludge-based activated carbon and temperature on the liquefaction of sewage sludge: yield and composition of bio-oil, immobilization and risk assessment of heavy metals.

PubMed

Zhai, Yunbo; Chen, Hongmei; Xu, Bibo; Xiang, Bobin; Chen, Zhong; Li, Caiting; Zeng, Guangming

2014-05-01

The influence of sewage sludge-based activated carbons (SSAC) on sewage sludge liquefaction has been carried out at 350 and 400°C. SSAC increased the yield and energy density of bio-oil at 350°C. The metallic compounds were the catalytic factor of SSAC obtained at 550°C (SSAC-550), while carbon was the catalytic factor of SSAC obtained at 650°C. Liquefaction with SSAC redistributed the species of heavy metals in solid residue (SR). With the addition of SSAC, the risk of Cu, Zn and Pb decreased at 350°C, while at 400°C the risk of Cd, Cu, and Zn were decreased. Ecological risk index indicated that 400°C was preferable for the toxicity decrement of SR, while risk assessment code indicated that SR obtained at 350°C contained lower risk. Considering the bio-oil yield, liquefaction at 350°C with SSAC-550 was preferable. Copyright © 2014 Elsevier Ltd. All rights reserved.

Factors that influence women's dispositions toward science

NASA Astrophysics Data System (ADS)

Atria, Catherine Graczyk

Females have been underrepresented in the study of science and science careers for decades although advancements have been made in closing this gender gap, the gap persists particularly in the physical sciences. Variables which influence a woman's desire to pursue and maintain a science course of study and career must be discovered. The United States lags behind other industrialized countries in the fields of science, math, and engineering. Females comprise an estimated half of the population; their potential contributions cannot be ignored or overlooked. This retrospective research study explores the personal experiences of ten women enrolled in science majors, with science related career plans. The goal of this study is to describe the factors that influence the participants' interest in science. The findings, the effect of science coursework, science teachers' personality and manner, other influential educational personnel, role models and mentors, external influences exclusive of school, parental influence, locus of control and positive attitudes toward science confirm what other researchers have found.

Factors influencing post-traumatic stress in Korean forensic science investigators.

PubMed

Yoo, Yang-Sook; Cho, Ok-Hee; Cha, Kyeong-Sook; Boo, Yun-Jeong

2013-09-01

The aim of this study was to understand factors that influence post-traumatic stress (PTS) in Korean forensic science investigators. A total of 111 forensic science investigators were recruited in Korea. PTS was measured using the tool modified by Choi (2001) from the original developed by Foa, Riggs, Dancu, and Rothbaum (1993) based on DSM-IV. Factors influencing PTS included demographic and job-related characteristics, emotional intelligence, and death anxiety. PTS scores were positively correlated with personality type, fatigue from work, and death anxiety. PTS scores were negatively correlated with length of career as a forensic science investigator and emotional intelligence. The factors that had the greatest influence on PTS were death anxiety, years spent as a forensic science investigator, personality type, emotional intelligence, fatigue, and homicide experience. The explanatory power of these six factors was 44.0%. Therefore, it is necessary to regularly evaluate the mental health of those who are vulnerable to PTS. Based on these results, various interventions could be implemented for promoting overall health of the forensic science investigators. Copyright © 2013. Published by Elsevier B.V.

Factors Potentially Influencing Student Acceptance of Biological Evolution

NASA Astrophysics Data System (ADS)

Wiles, Jason R.

This investigation explored scientific, religious, and otherwise nonscientific factors that may influence student acceptance of biological evolution and related concepts, how students perceived these factors to have influenced their levels of acceptance of evolution and changes therein, and what patterns arose among students' articulations of how their levels of acceptance of evolution may have changed. This exploration also measured the extent to which students' levels of acceptance changed following a treatment designed to address factors identified as potentially affecting student acceptance of evolution. Acceptance of evolution was measured using the MATE instrument (Rutledge and Warden, 1999; Rutledge and Sadler, 2007) among participants enrolled in a secondary-level academic program during the summer prior to their final year of high school and as they transitioned to the post-secondary level. Student acceptance of evolution was measured to be significantly higher than pre-treatment levels both immediately following and slightly over one year after treatment. Qualitative data from informal questionnaires, from formal course evaluations, and from semi-structured interviews of students engaged in secondary level education and former students at various stages of post-secondary education confirmed that the suspected factors were perceived by participants to have influenced their levels of acceptance of evolution. Furthermore, participant reports provided insight regarding the relative effects they perceived these factors to have had on their evolution acceptance levels. Additionally, many participants reported that their science teachers in public schools had avoided, omitted, or denigrated evolution during instruction, and several of these students expressed frustration regarding what they perceived to have been a lack of education of an important scientific principle. Finally, no students expressed feelings of being offended by having been taught about

Factors influencing worker use of personal protective eyewear.

PubMed

Lombardi, David A; Verma, Santosh K; Brennan, Melanye J; Perry, Melissa J

2009-07-01

To identify and describe the array of factors that influence a workers' decision to wear personal protective eyewear (PPE) and the barriers that exist in preventing their use. A series of focus groups enrolled workers and supervisors primarily from manufacturing, construction, or service/retail industries that had potential exposure to eye injury hazards in their job tasks. Focus group sessions were facilitated to collect qualitative and quantitative data in two categories, "sought information" and "emergent themes", related to the factors influencing use of PPE. We conducted a series of 7 groups with 51 participants, 36 (71%) males and 15 (29%) females ranging in age from 19 to 64 years old, from a variety of occupations including construction (24%), production (22%), installation, repair and maintenance (14%), and healthcare (10%). Most were highly experienced in their occupation (>10 years); males (86%) and females (53%), and had received some safety training in the past (82%). The majority of workers in this study were required to wear PPE on their worksite (78%), however only 55% had a dedicated safety officer. A conceptual model that summarizes the "sought information" and "emergent themes" is presented that depicts the decision making process for the factors influencing use of PPE and consists of three primary branches; perceptions of hazards and risks, "barriers" to PPE usage, and enforcement and reinforcement. Lack of comfort/fit, and fogging and scratching of the eyewear were suggested as the most important barriers to PPE usage. Younger age and lack of safety training were other important factors affecting use of PPE. Several potentially modifiable factors identified would lead to an increase in workers' PPE use and encourage supervisors to provide ongoing positive feedback on the continuous use of PPE by workers at risk for an eye injury.

Why neurology? Factors which influence career choice in neurology.

PubMed

Albert, Dara V; Hoyle, Chad; Yin, Han; McCoyd, Matthew; Lukas, Rimas V

2016-01-01

To evaluate the factors which influence the decision to pursue a career in neurology. An anonymous survey was developed using a Likert scale to rate responses. The survey was sent to adult and child neurology faculty, residents and fellows, as well as medical students applying for neurology. Descriptive statistics were used to analyse the factors of influence. Respondents were subsequently categorized into pre-neurology trainees, neurology trainees, child neurologists and adult neurologists, and differences between the groups were analysed using Pearson's chi-square test. One hundred and thirty-three anonymous responses were received. The respondents were neurologists across all levels of training and practice. Across all respondents, the most common factor of high importance was intellectual content of specialty, challenging diagnostic problems, type of patient encountered and interest in helping people. Responses were similar across the groups; however, the earliest trainees cited interest in helping people as most important, while those in neurology training and beyond cite intellectual content of the specialty as most important. As trainees transition from their earliest levels of clinical experience into working as residents and faculty, there is a shift in the cited important factors. Lifestyle and financial factors seem to be the least motivating across all groups. Encouragement from peers, mentors, faculty and practicing physicians is considered high influences in a smaller number of neurologists. This may present an opportunity for practicing neurologists to make connections with medical students early in their education in an effort to encourage and mentor candidates.

[Spatial variations of heavy metals in precipitation at Mount Taishan region].

PubMed

Wang, Yan; Liu, Xiao-Huan; Jin, Ling-Ren; Yue, Tai-Xing; Wang, De-Zhong; Wang, Wen-Xing

2007-11-01

Zn, Al, Mn, Fe, Pb, Cu, Ni, Cr, As, Cd in rain samples collected from two sites at Mount Taishan region were determined by ICP-MS, to evaluate the spatial variation characteristics of heavy metals in precipitation. Individual rain events were sampled for one whole year from Jan. to Dec. 2006. High concentrations of heavy metals were found at both sites, indicating serious heavy metal pollution. Zn was the most abundant element, accounting for 54% - 57% of the total metals concentrations. Its volume-weighted mean concentrations of precipitation at Mt-top and Mt-foot sites were 92.94 microg/L and 70.41 microg/L respectively. The following elements were Fe, Al and Mn and their concentrations were much higher than toxic heavy metals (As, Cd and Cd) except Pb (8.04 microg/L and 7.79 microg/L at two sites respectively). Comparison results between two sites suggested that heavy metal characteristics of precipitation at two sites were different, due to the influences of different ambient air conditions. Correlation analysis between two sites showed that Al, Mn, Fe, As, Cd, Pb influenced by air mass origin greatly, while Ni, Cu, Zn affected by other different factors.

Can gamma irradiation during radiotherapy influence the metal release process for biomedical CoCrMo and 316L alloys?

PubMed

Wei, Zheng; Edin, Jonathan; Karlsson, Anna Emelie; Petrovic, Katarina; Soroka, Inna L; Odnevall Wallinder, Inger; Hedberg, Yolanda

2018-02-09

The extent of metal release from implant materials that are irradiated during radiotherapy may be influenced by irradiation-formed radicals. The influence of gamma irradiation, with a total dose of relevance for radiotherapy (e.g., for cancer treatments) on the extent of metal release from biomedical stainless steel AISI 316L and a cobalt-chromium alloy (CoCrMo) was investigated in physiological relevant solutions (phosphate buffered saline with and without 10 g/L bovine serum albumin) at pH 7.3. Directly after irradiation, the released amounts of metals were significantly higher for irradiated CoCrMo as compared to nonirradiated CoCrMo, resulting in an increased surface passivation (enhanced passive conditions) that hindered further release. A similar effect was observed for 316L showing lower nickel release after 1 h of initially irradiated samples as compared to nonirradiated samples. However, the effect of irradiation (total dose of 16.5 Gy) on metal release and surface oxide composition and thickness was generally small. Most metals were released initially (within seconds) upon immersion from CoCrMo but not from 316L. Albumin induced an increased amount of released metals from AISI 316L but not from CoCrMo. Albumin was not found to aggregate to any greater extent either upon gamma irradiation or in the presence of trace metal ions, as determined using different light scattering techniques. Further studies should elucidate the effect of repeated friction and fractionated low irradiation doses on the short- and long term metal release process of biomedical materials. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2018. © 2018 The Authors Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc.

Consumer's Online Shopping Influence Factors and Decision-Making Model

NASA Astrophysics Data System (ADS)

Yan, Xiangbin; Dai, Shiliang

Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

[Analysis of influencing factors of snow hyperspectral polarized reflections].

PubMed

Sun, Zhong-Qiu; Zhao, Yun-Sheng; Yan, Guo-Qian; Ning, Yan-Ling; Zhong, Gui-Xin

2010-02-01

Due to the need of snow monitoring and the impact of the global change on the snow, on the basis of the traditional research on snow, starting from the perspective of multi-angle polarized reflectance, we analyzed the influencing factors of snow from the incidence zenith angles, the detection zenith angles, the detection azimuth angles, polarized angles, the density of snow, the degree of pollution, and the background of the undersurface. It was found that these factors affected the spectral reflectance values of the snow, and the effect of some factors on the polarization hyperspectral reflectance observation is more evident than in the vertical observation. Among these influencing factors, the pollution of snow leads to an obvious change in the snow reflectance spectrum curve, while other factors have little effect on the shape of the snow reflectance spectrum curve and mainly impact the reflection ratio of the snow. Snow reflectance polarization information has not only important theoretical significance, but also wide application prospect, and provides new ideas and methods for the quantitative research on snow using the remote sensing technology.

Factors Influencing Renewable Energy Production & Supply - A Global Analysis

NASA Astrophysics Data System (ADS)

Ali, Anika; Saqlawi, Juman Al

2016-04-01

Renewable energy is one of the key technologies through which the energy needs of the future can be met in a sustainable and carbon-neutral manner. Increasing the share of renewable energy in the total energy mix of each country is therefore a critical need. While different countries have approached this in different ways, there are some common aspects which influence the pace and effectiveness of renewable energy incorporation. This presentation looks at data and information from 34 selected countries, analyses the patterns, compares the different parameters and identifies the common factors which positively influence renewable energy incorporation. The most successful countries are analysed for their renewable energy performance against their GDP, policy/regulatory initiatives in the field of renewables, landmass, climatic conditions and population to identify the most influencing factors to bring about positive change in renewable energy share.

The Influence Factors and Mechanism of Societal Risk Perception

NASA Astrophysics Data System (ADS)

Zheng, Rui; Shi, Kan; Li, Shu

Risk perception is one of important subjects in management psychology and cognitive psychology. It is of great value in the theory and practice to investigate the societal hazards that the public cares a lot especially in Socio-economic transition period. A survey including 30 hazards and 6 risk attributes was designed and distributed to about 2, 485 residents of 8 districts, Beijing. The major findings are listed as following: Firstly, a scale of societal risk perception was designed and 2 factors were identified (Dread Risk & Unknown Risk). Secondly, structural equation model was used to analyze the influence factors and mechanism of societal risk perception. Risk preference, government support and social justice could influence societal risk perception directly. Government support fully moderated the relationship between government trust and societal risk perception. Societal risk perception influenced life satisfaction, public policy preferences and social development belief.

Factors influencing the flavour of game meat: A review.

PubMed

Neethling, J; Hoffman, L C; Muller, M

2016-03-01

Flavour is a very important attribute contributing to the sensory quality of meat and meat products. Although the sensory quality of meat includes orthonasal and retronasal aroma, taste, as well as appearance, juiciness and other textural attributes, the focus of this review is primarily on flavour. The influence of species, age, gender, muscle anatomical location, diet, harvesting conditions, ageing of meat, packaging and storage, as well as cooking method on the flavour of game meat are discussed. Very little research is available on the factors influencing the flavour of the meat derived from wild and free-living game species. The aim of this literature review is thus to discuss the key ante- and post-mortem factors that influence the flavour of game meat, with specific focus on wild and free-living South African game species. Copyright © 2015 Elsevier Ltd. All rights reserved.

Energy Harvesting with a Liquid-Metal Microfluidic Influence Machine

NASA Astrophysics Data System (ADS)

Conner, Christopher; de Visser, Tim; Loessberg, Joshua; Sherman, Sam; Smith, Andrew; Ma, Shuo; Napoli, Maria Teresa; Pennathur, Sumita; Weld, David

2018-04-01

We describe and demonstrate an alternative energy-harvesting technology based on a microfluidic realization of a Wimshurst influence machine. The prototype device converts the mechanical energy of a pressure-driven flow into electrical energy, using a multiphase system composed of droplets of liquid mercury surrounded by insulating oil. Electrostatic induction between adjacent metal droplets drives charge through external electrode paths, resulting in continuous charge amplification and collection. We demonstrate a power output of 4 nW from the initial prototype and present calculations suggesting that straightforward device optimization could increase the power output by more than 3 orders of magnitude. At that level, the power efficiency of this energy-harvesting mechanism, limited by viscous dissipation, could exceed 90%. The microfluidic context enables straightforward scaling and parallelization, as well as hydraulic matching to a variety of ambient mechanical energy sources, such as human locomotion.

Studies on metal content in the brown seaweed, Fucus vesiculosus, from the Archipelago of Stockholm.

PubMed

Forsberg, A; Söderlund, S; Frank, A; Petersson, L R; Pedersén, M

1988-01-01

Concentrations of eleven metals (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn) were determined in the brown seaweed Fucus vesiculosus collected from the Archipelago of Stockholm. Several factors which influence the metal content in the seaweed have been studied, including errors caused by epiphytes, sea exposure and differences depending on which part of the seaweed is analysed. It is concluded that, if all these factors are considered, Fucus vesiculosus plants are excellent bio-indicators of metal pollution. This is also demonstrated by a significant increase in metal content in transplanted Fucus vesiculosus near the city of Stockholm. The results from this investigation also indicate increasing metal concentrations, especially Cd, in samples from the northern parts of the Archipelago and the reason for this is discussed.

Factors Influencing Employee Learning in Small Businesses

ERIC Educational Resources Information Center

Coetzer, Alan; Perry, Martin

2008-01-01

Purpose: The purpose of this research is to identify key factors influencing employee learning from the perspective of owners/managers. Design/methodology/research: Data were gathered from owners/managers in a total of 27 small manufacturing and services firms through interviews and analysed using content analytic procedures. Findings: The…

Exploring Factors That Influence Quality Literature Circles

ERIC Educational Resources Information Center

Young, Chase; Mohr, Kathleen A. J.

2018-01-01

Research indicates that literature circles are an authentic means for literacy development that students typically enjoy. To better understand the potential value and to add to the research base regarding literature circles, this study, involving 17 fourth graders, explores factors that may influence the quality of literature discussions,…

A Survey of Factors Influencing High School Start Times

ERIC Educational Resources Information Center

Wolfson, Amy R.; Carskadon, Mary A.

2005-01-01

The present study surveyed high school personnel regarding high school start times, factors influencing school start times, and decision making around school schedules. Surveys were analyzed from 345 secondary schools selected at random from the National Center for Educational Statistics database. Factors affecting reported start times included…

Factors influencing global antiretroviral procurement prices.

PubMed

Wirtz, Veronika J; Forsythe, Steven; Valencia-Mendoza, Atanacio; Bautista-Arredondo, Sergio

2009-11-18

Antiretroviral medicines (ARVs) are one of the most costly parts of HIV/AIDS treatment. Many countries are struggling to provide universal access to ARVs for all people living with HIV and AIDS. Although substantial price reductions of ARVs have occurred, especially between 2002 and 2008, achieving sustainable access for the next several decades remains a major challenge for most low- and middle-income countries. The objectives of the present study were twofold: first, to analyze global ARV prices between 2005 and 2008 and associated factors, particularly procurement methods and key donor policies on ARV procurement efficiency; second, to discuss the options of procurement processes and policies that should be considered when implementing or reforming access to ARV programs. An ARV-medicines price-analysis was carried out using the Global Price Reporting Mechanism from the World Health Organization. For a selection of 12 ARVs, global median prices and price variation were calculated. Linear regression models for each ARV were used to identify factors that were associated with lower procurement prices. Logistic regression models were used to identify the characteristics of those countries which procure below the highest and lowest direct manufactured costs. Three key factors appear to have an influence on a country's ARV prices: (a) whether the product is generic or not; (b) the socioeconomic status of the country; (c) whether the country is a member of the Clinton HIV/AIDS Initiative. Factors which did not influence procurement below the highest direct manufactured costs were HIV prevalence, procurement volume, whether the country belongs to the least developed countries or a focus country of the United States President's Emergency Plan For AIDS Relief. One of the principal mechanisms that can help to lower prices for ARV over the next several decades is increasing procurement efficiency. Benchmarking prices could be one useful tool to achieve this.

Factors influencing global antiretroviral procurement prices

PubMed Central

2009-01-01

Background Antiretroviral medicines (ARVs) are one of the most costly parts of HIV/AIDS treatment. Many countries are struggling to provide universal access to ARVs for all people living with HIV and AIDS. Although substantial price reductions of ARVs have occurred, especially between 2002 and 2008, achieving sustainable access for the next several decades remains a major challenge for most low- and middle-income countries. The objectives of the present study were twofold: first, to analyze global ARV prices between 2005 and 2008 and associated factors, particularly procurement methods and key donor policies on ARV procurement efficiency; second, to discuss the options of procurement processes and policies that should be considered when implementing or reforming access to ARV programs. Methods An ARV-medicines price-analysis was carried out using the Global Price Reporting Mechanism from the World Health Organization. For a selection of 12 ARVs, global median prices and price variation were calculated. Linear regression models for each ARV were used to identify factors that were associated with lower procurement prices. Logistic regression models were used to identify the characteristics of those countries which procure below the highest and lowest direct manufactured costs. Results Three key factors appear to have an influence on a country's ARV prices: (a) whether the product is generic or not; (b) the socioeconomic status of the country; (c) whether the country is a member of the Clinton HIV/AIDS Initiative. Factors which did not influence procurement below the highest direct manufactured costs were HIV prevalence, procurement volume, whether the country belongs to the least developed countries or a focus country of the United States President's Emergency Plan For AIDS Relief. Conclusion One of the principal mechanisms that can help to lower prices for ARV over the next several decades is increasing procurement efficiency. Benchmarking prices could be one useful

Heavy metals in surface sediments of the Jialu River, China: their relations to environmental factors.

PubMed

Fu, Jie; Zhao, Changpo; Luo, Yupeng; Liu, Chunsheng; Kyzas, George Z; Luo, Yin; Zhao, Dongye; An, Shuqing; Zhu, Hailiang

2014-04-15

This work investigated heavy metal pollution in surface sediments of the Jialu River, China. Sediment samples were collected at 19 sites along the river in connection with field surveys and the total concentrations were determined using atomic fluorescence spectrometer and inductively coupled plasma optical emission spectrometer. Sediment samples with higher metal concentrations were collected from the upper reach of the river, while sediments in the middle and lower reaches had relatively lower metal concentrations. Multivariate techniques including Pearson correlation, hierarchical cluster and principal components analysis were used to evaluate the metal sources. The ecological risk associated with the heavy metals in sediments was rated as moderate based on the assessments using methods of consensus-based Sediment Quality Guidelines, Potential Ecological Risk Index and Geo-accumulation Index. The relations between heavy metals and various environmental factors (i.e., chemical properties of sediments, water quality indices and aquatic organism indices) were also studied. Nitrate nitrogen, total nitrogen, and total polycyclic aromatic hydrocarbons concentrations in sediments showed a co-release behavior with heavy metals. Ammonia nitrogen, total nitrogen, orthophosphate, total phosphate and permanganate index in water were found to be related to metal sedimentation. Heavy metals in sediments posed a potential impact on the benthos community. Copyright © 2014 Elsevier B.V. All rights reserved.

Influencing factors on the visibility of surface distresses

NASA Astrophysics Data System (ADS)

Smęt, Wojciech; Skakuj, Marek

2018-05-01

A systematic and future-oriented maintenance management requires quality-assured data regarding the condition of the roadway. An important characteristic for assessing the condition of the road surface are cracks [1]. Experience has proven that the road surface temperature and residual humidity can influence the visibility of cracks. To investigate and quantify these influencing factors in more detail, the Federal Ministry of Transport and Digital Infrastructure has implemented a comprehensive research project [2], during which several measurement campaigns were carried out at different seasons and at different temperatures and humidity degrees of the road surface. The visibility of the cracks was assessed using the German approach ZTV ZEB-StB [3]. After evaluating the cracks, the data was synchronized and the network allocation of the geo-referenced raw data was realized. The relevant condition performance indicators were calculated subsequently. For each evaluation section of 100 meters length, the mean road surface temperature was calculated and, if available, the type and year of construction of the surface course was determined. The evaluated data was visualized to establish correlations between the data and the influencing factors. For the statistical analysis of the results, a total of six comparative scenarios were defined in which the influencing factors of road surface temperature and residual humidity were assessed. This paper documents the results of the research project. In order to obtain a uniform and comparable picture of the condition of the road surface over the years and thus to be able to observe the aging process of the road surface, the measurement campaigns are to be carried out under defined conditions. The research project included proposals for defining and further specifying the measurement conditions.

Attitudes, norms and controls influencing lifestyle risk factor management in general practice.

PubMed

Ampt, Amanda J; Amoroso, Cheryl; Harris, Mark F; McKenzie, Suzanne H; Rose, Vanessa K; Taggart, Jane R

2009-08-26

With increasing rates of chronic disease associated with lifestyle behavioural risk factors, there is urgent need for intervention strategies in primary health care. Currently there is a gap in the knowledge of factors that influence the delivery of preventive strategies by General Practitioners (GPs) around interventions for smoking, nutrition, alcohol consumption and physical activity (SNAP). This qualitative study explores the delivery of lifestyle behavioural risk factor screening and management by GPs within a 45-49 year old health check consultation. The aims of this research are to identify the influences affecting GPs' choosing to screen and choosing to manage SNAP lifestyle risk factors, as well as identify influences on screening and management when multiple SNAP factors exist. A total of 29 audio-taped interviews were conducted with 15 GPs and one practice nurse over two stages. Transcripts from the interviews were thematically analysed, and a model of influencing factors on preventive care behaviour was developed using the Theory of Planned Behaviour as a structural framework. GPs felt that assessing smoking status was straightforward, however some found assessing alcohol intake only possible during a formal health check. Diet and physical activity were often inferred from appearance, only being assessed if the patient was overweight. The frequency and thoroughness of assessment were influenced by the GPs' personal interests and perceived congruence with their role, the level of risk to the patient, the capacity of the practice and availability of time. All GPs considered advising and educating patients part of their professional responsibility. However their attempts to motivate patients were influenced by perceptions of their own effectiveness, with smoking causing the most frustration. Active follow-up and referral of patients appeared to depend on the GPs' orientation to preventive care, the patient's motivation, and cost and accessibility of

Motivational factors influencing nurses to undertake postgraduate hospital-based education.

PubMed

Kinsella, Danny; Fry, Margaret; Zecchin, Alison

2018-05-01

Specialist postgraduate education improves patient health outcomes, and assists in meeting the emerging specialisation of nursing practice. The aim of this study was to investigate the motivational factors that influence nurses' engagement with hospital-based postgraduate education. The research design was descriptive and exploratory, using a survey method. The survey consisted of demographic details, the Participation Reasons Scale (PRS) and open-ended questions. Thirty-four participants (100%) completed the survey. Of the PRS extrinsic and intrinsic factors, Professional Improvement and Development (Factor 1) and Professional Service (Factor 2), both intrinsic factors, ranked the highest. Therefore, this study identified that intrinsic motivation factors influenced engagement with postgraduate specialty programs for early career nurses. These results highlight the importance of intrinsic motivation factors for a nursing workforce and how this can potentially drive behaviour and decision making. A better understanding of motivation factors across a nurse's career could lead to educational strategies that optimise postgraduate program engagement to better support healthcare delivery and a culture of lifelong learning. Copyright © 2018. Published by Elsevier Ltd.

Nurturing Sport Expertise: Factors Influencing the Development of Elite Athlete

PubMed Central

Baker, Joseph; Horton, Sean; Robertson-Wilson, Jennifer; Wall, Michael

2003-01-01

The development of expertise in sport is the result of successful interaction of biological, psychological, and sociological constraints. This review examines the training and environmental factors that influence the acquisition of sport expertise. Research examining the quality and quantity of training indicate that these two elements are crucial predictors of attainment. In addition, the possession of resources such as parental support and adequate coaching are essential. Social factors such as cultural influences and the relative age effect are also considered as determinants of sport expertise. Although it is evident that environmental factors are essential to the acquisition of high levels of sport development, further research is clearly required. PMID:24616603

Analysis of the influencing factors of global energy interconnection development

NASA Astrophysics Data System (ADS)

Zhang, Yi; He, Yongxiu; Ge, Sifan; Liu, Lin

2018-04-01

Under the background of building global energy interconnection and achieving green and low-carbon development, this paper grasps a new round of energy restructuring and the trend of energy technology change, based on the present situation of global and China's global energy interconnection development, established the index system of the impact of global energy interconnection development factors. A subjective and objective weight analysis of the factors affecting the development of the global energy interconnection was conducted separately by network level analysis and entropy method, and the weights are summed up by the method of additive integration, which gives the comprehensive weight of the influencing factors and the ranking of their influence.

Factors influencing cancer treatment decision-making by indigenous peoples: a systematic review.

PubMed

Tranberg, Rona; Alexander, Susan; Hatcher, Deborah; Mackey, Sandra; Shahid, Shaouli; Holden, Lynda; Kwok, Cannas

2016-02-01

We aim to systematically review studies that identify factors influencing cancer treatment decision-making among indigenous peoples. Following the outline suggested by the Preferred Reporting Items for Systematic Review and Meta-analysis, a rigorous systematic review and meta-synthesis were conducted of factors that influence cancer treatment decision-making by indigenous peoples. A total of 733 articles were retrieved from eight databases and a manual search. After screening the titles and abstracts, the full text of 26 articles were critically appraised, resulting in five articles that met inclusion criteria for the review. Because the five articles to be reviewed were qualitative studies, the Critical Appraisal Skills Program toolkit was used to evaluate the methodological quality. A thematic synthesis was employed to identify common themes across the studies. Multiple socio-economic and cultural factors were identified that all had the potential to influence cancer treatment decision-making by indigenous people. These factors were distilled into four themes: spiritual beliefs, cultural influences, communication and existing healthcare systems and structures. Although existing research identified multiple factors influencing decision-making, this review identified that quality studies in this domain are scarce. There is scope for further investigation, both into decision-making factors and into the subsequent design of culturally appropriate programmes and services that meet the needs of indigenous peoples. Copyright © 2015 John Wiley & Sons, Ltd.

Factors Influencing Pursuit of Higher Education: Validating a Questionnaire.

ERIC Educational Resources Information Center

Harris, Sandra M.

This paper explains the process used to validate the construct validity of the Factors Influencing Pursuit of Higher Education Questionnaire. This questionnaire is a literature-based, researcher-developed instrument which gathers information on the factors thought to affect a person's decision to pursue higher education. The questionnaire includes…

Concrete pavement mixture design and analysis (MDA) : factors influencing drying shrinkage.

DOT National Transportation Integrated Search

2014-10-01

This literature review focuses on factors influencing drying shrinkage of concrete. Although the factors are normally interrelated, they : can be categorized into three groups: paste quantity, paste quality, and other factors.

An Analysis of Factors that Influence Enlistment Decisions in the U.S. Army

DTIC Science & Technology

1998-03-01

NAVAL POSTGRADUATE SCHOOL Monterey, California CM THESIS AN ANALYSIS OF FACTORS THAT INFLUENCE ENLISTMENT DECISIONS IN THE U.S. ARMY by Young...TITLE AND SUBTITLE : AN ANALYSIS OF FACTORS THAT INFLUENCE ENLISTMENT DECISIONS IN THE U.S. ARMY 6. AUTHOR(S) Oh, Young Yeol 7...200 words) The purpose of this thesis is to analyze factors that influence decisions to enlist in the U.S. Army. This thesis uses 1997 New Recruit

Influence of Poorly Crystalline Metal Oxides on Soil Organic Matter Stability in Four Eastern Deciduous Forest Soils

NASA Astrophysics Data System (ADS)

Porras, R. C.; Torn, M. S.; McFarlane, K. J.

2011-12-01

Association with mineral surfaces is suggested as one mechanism underlying the long-term stabilization of organic matter in soils. Several recent studies have demonstrated a positive correlation between short range ordered soil Fe and Al concentrations and soil OM or radiocarbon based residence time. The positive correlation between poorly crystalline Fe and Al and 14C-based residence times suggests that mineral associated OM persists over much longer time scales. Suggested mechanisms include encapsulation within iron oxide microaggregate structures or adsorption to highly reactive metal oxide mineral surfaces both of which have been shown to reduce the bioavailabilty of toxicant species in soil and aquatic environments. We utilized radiocarbon measurements coupled with selective chemical dissolution techniques to investigate the relationship between the concentration of short range order Fe and Al oxides and the stability of soil organic matter across four deciduous forest sites in the eastern U.S.comprising three different soil orders. Preliminary results indicate that SRO Fe and Al slow the turnover of SOM, with a significant linear relationship between computed radiocarbon turnover time and SRO Al and Fe overall (R2= 0.60,P=0.0001,CL=95%). Piecewise regression analysis on turnover time vs. metal oxide concentration for all four sites shows an apparent metal oxide threshold value at 5g kg-1. Sites with SRO Al and Fe content below this value showed no statistically significant influence on SOM stability presumably because they are present in insufficient quantity to exert a measureable influence on the decomposability of organic inputs. Among individual sites, Harvard Forest had the highest extractable metal oxide concentrations and exhibited the strongest influence of SRO Fe and Al oxides on 14C based turnover times (R2=0.91, P=0.0001,CL=95%); in this soil, poorly crystalline metal oxides are quantitatively important in stabilizing organic inputs against

From shared care to disease management: key-influencing factors

PubMed Central

Eijkelberg, Irmgard M.J.G.; Spreeuwenberg, Cor; Mur-Veeman, Ingrid M.; Wolffenbuttel, Bruce H.R.

2001-01-01

Abstract Background In order to improve the quality of care of chronically ill patients the traditional boundaries between primary and secondary care are questioned. To demolish these boundaries so-called ‘shared care’ projects have been initiated in which different ways of substitution of care are applied. When these projects end, disease management may offer a solution to expand the achieved co-operation between primary and secondary care. Objective Answering the question: What key factors influence the development and implementation of shared care projects from a management perspective and how are they linked? Theory The theoretical framework is based on the concept of the learning organisation. Design Reference point is a multiple case study that finally becomes a single case study. Data are collected by means of triangulation. The studied cases concern two interrelated Dutch shared care projects for type 2 diabetic patients, that in the end proceed as one disease management project. Results In these cases the predominant key-influencing factors appear to be the project management, commitment and local context, respectively. The factor project management directly links the latter two, albeit managing both appear prerequisites to its success. In practice this implies managing the factors' interdependency by the application of change strategies and tactics in a committed and skilful way. Conclusion Project management, as the most important and active key factor, is advised to cope with the interrelationships of the influencing factors in a gradually more fundamental way by using strategies and tactics that enable learning processes. Then small-scale shared care projects may change into a disease management network at a large scale, which may yield the future blueprint to proceed. PMID:16896415

From shared care to disease management: key-influencing factors.

PubMed

Eijkelberg, I M; Spreeuwenberg, C; Mur-Veeman, I M; Wolffenbuttel, B H

2001-01-01

In order to improve the quality of care of chronically ill patients the traditional boundaries between primary and secondary care are questioned. To demolish these boundaries so-called 'shared care' projects have been initiated in which different ways of substitution of care are applied. When these projects end, disease management may offer a solution to expand the achieved co-operation between primary and secondary care. Answering the question: What key factors influence the development and implementation of shared care projects from a management perspective and how are they linked? The theoretical framework is based on the concept of the learning organisation. Reference point is a multiple case study that finally becomes a single case study. Data are collected by means of triangulation. The studied cases concern two interrelated Dutch shared care projects for type 2 diabetic patients, that in the end proceed as one disease management project. In these cases the predominant key-influencing factors appear to be the project management, commitment and local context, respectively. The factor project management directly links the latter two, albeit managing both appear prerequisites to its success. In practice this implies managing the factors' interdependency by the application of change strategies and tactics in a committed and skillful way. Project management, as the most important and active key factor, is advised to cope with the interrelationships of the influencing factors in a gradually more fundamental way by using strategies and tactics that enable learning processes. Then small-scale shared care projects may change into a disease management network at a large scale, which may yield the future blueprint to proceed.

Critical factors and paths influencing construction workers' safety risk tolerances.

PubMed

Wang, Jiayuan; Zou, Patrick X W; Li, Penny P

2016-08-01

While workers' safety risk tolerances have been regarded as a main reason for their unsafe behaviors, little is known about why different people have different risk tolerances even when confronting the same situation. The aim of this research is to identify the critical factors and paths that influence workers' safety risk tolerance and to explore how they contribute to accident causal model from a system thinking perceptive. A number of methods were carried out to analyze the data collected through interviews and questionnaire surveys. In the first and second steps of the research, factor identification, factor ranking and factor analysis were carried out, and the results show that workers' safety risk tolerance can be influenced by four groups of factors, namely: (1) personal subjective perception; (2) work knowledge and experiences; (3) work characteristics; and (4) safety management. In the third step of the research, hypothetical influencing path model was developed and tested by using structural equation modeling (SEM). It is found that the effects of external factors (safety management and work characteristics) on risk tolerance are larger than that of internal factors (personal subjective perception and work knowledge & experiences). Specifically, safety management contributes the most to workers' safety risk tolerance through its direct effect and indirect effect; while personal subjective perception comes the second and can act as an intermedia for work characteristics. This research provides an in-depth insight of workers' unsafe behaviors by depicting the contributing factors as shown in the accident causal model developed in this research. Copyright © 2015 Elsevier Ltd. All rights reserved.

Factors influencing behavior in the forced swim test

PubMed Central

Bogdanova, Olena V.; Kanekar, Shami; D’Anci, Kristen E.; Renshaw, Perry F.

2017-01-01

The forced swim test (FST) is a behavioral test in rodents which was developed in 1978 by Porsolt and colleagues as a model for predicting the clinical efficacy of antidepressant drugs. A modified version of the FST added the classification of active behaviors into swimming and climbing, in order to facilitate the differentiation between serotonergic and noradrenergic classes of antidepressant drugs. The FST is now widely used in basic research and the pharmaceutical screening of potential antidepressant treatments. It is also one of the most commonly used tests to assess depressive-like behavior in animal models. Despite the simplicity and sensitivity of the FST procedure, important differences even in baseline immobility rates have been reported between different groups, which complicate the comparison of results across studies. In spite of several methodological papers and reviews published on the FST, the need still exists for clarification of factors which can influence the procedure. While most recent reviews have focused on antidepressant effects observed with the FST, this one considers the methodological aspects of the procedure, aiming to summarize issues beyond antidepressant action in the FST. The previously published literature is analyzed for factors which are known to influence animal behavior in the FST. These include biological factors, such as strain, age, body weight, gender and individual differences between animals; influence of preconditioning before the FST: handling, social isolation or enriched environment, food manipulations, various kinds of stress, endocrine manipulations and surgery; schedule and routes of treatment, dosage and type of the drugs as well as experimental design and laboratory environmental effects. Consideration of these factors in planning experiments may result in more consistent FST results. PMID:23685235

Motivating Factors Influencing College Students' Choice of Academic Major

PubMed Central

Brocavich, Joseph M.; Boone, R. Thomas; Pal, Somnath

2010-01-01

Objectives To assess the factors, motivations, and nonacademic influences that affected the choice of major among pharmacy and nonpharmacy undergraduate students. Methods A survey was administered to 618 pharmacy and nonpharmacy majors to assess background and motivational factors that may have influenced their choice of major. The sample consisted of freshman and sophomore students enrolled in a required speech course. Results African-American and Hispanic students were less likely to choose pharmacy as a major than Caucasians, whereas Asian-Americans were more likely to choose pharmacy as a major. Pharmacy students were more likely to be interested in science and math than nonpharmacy students. Conclusion Students' self-reported racial/ethnic backgrounds influence their decision of whether to choose pharmacy as their academic major. Results of this survey provide further insight into developing effective recruiting strategies and enhancing the marketing efforts of academic institutions. PMID:20498739

Factors influencing tinnitus loudness and annoyance.

PubMed

Hiller, Wolfgang; Goebel, Gerhard

2006-12-01

To evaluate the 2 major components of tinnitus severity, loudness and annoyance, and their degree of dependence on characteristics of tinnitus manifestation, history, and etiology. Cross-sectional survey performed during the first months of 2004. Nonclinical population. A total of 4995 members of the German Tinnitus League. Comprehensive screening questionnaire, including the Klockhoff and Lindblom loudness grading system and the miniversion of the Tinnitus Questionnaire. A moderate correlation of 0.45 was found between tinnitus loudness and annoyance. Both factors were generally higher in men, those older than 50 years, those with binaural and centrally perceived tinnitus, those with increased noise sensitivity, and those who had continuous tinnitus without interruptions. Tinnitus that lasted 12 months or less had a stronger influence on annoyance (odds ratio [OR], 1.96) than on loudness (OR, 0.45), whereas the contrary was found for tinnitus of more than 5 years' duration (ORs, 0.72 and 2.11, respectively). Loudness and annoyance were increased in subjects with coexisting hearing loss, vertigo, and hyperacusis. The impact of hyperacusis on annoyance was clearly stronger than on loudness (ORs, 21.91 vs 9.47). Several clinical factors of tinnitus influence perceived loudness and annoyance. Both are distinguishable components of tinnitus severity.

Essential and toxic metals in animal bone broths

PubMed Central

Hsu, Der-jen; Lee, Chia-wei; Tsai, Wei-choung; Chien, Yeh-chung

2017-01-01

ABSTRACT Background: This investigation examines the extraction of metals from animal bones into broth, and assesses whether bone broths are good sources of essential metals and the risks associated with the consumption of toxic metals. Method:Three sets of controlled experiments were performed to study the factors (cooking time, acidity, bone type and animal species) that influence metal extractions. Three types of animal bone broth-based foods were also tested. Results: Reducing the broth pH from 8.38 to 5.32 significantly (p < 0.05) increased Ca and Mg extraction by factors of 17.4 and 15.3, respectively. A long cooking time, > 8 h, yielded significantly higher (p < 0.05) Ca and Mg extraction than shorter cooking times. The extraction characteristics of metals, particularly Ca, Mg, Cu and Al, from the leg and rib bones differed. The between-species variations in extraction were larger than those of within-species. Conclusions:The Ca and Mg levels in home-made or commercial broth/soup were found not to exceed low tenths of milligram per serving, or <5% of the daily recommended levels. The risks that are associated with the ingestion of heavy metals such as Pb and Cd in broth are minimal because the levels were in the ranges of a few μg per serving. PMID:28804437

Corrosion and Protection of Metal in the Seawater Desalination

NASA Astrophysics Data System (ADS)

Hou, Xiangyu; Gao, Lili; Cui, Zhendong; Yin, Jianhua

2018-01-01

Seawater desalination develops rapid for it can solve water scarcity efficiently. However, corrosion problem in the seawater desalination system is more serious than that in normal water. So, it is important to pay attention to the corrosion and protection of metal in seawater desalination. The corrosion characteristics and corrosion types of metal in the seawater desalination system are introduced in this paper; In addition, corrosion protect methods and main influencing factors are stated, the latest new technologies about anti-corrosion with quantum energy assisted and magnetic inhibitor are presented.

Metal-based nanoparticle interactions with the nervous system: the challenge of brain entry and the risk of retention in the organism.

PubMed

Yokel, Robert; Grulke, Eric; MacPhail, Robert

2013-01-01

This review of metal-based nanoparticles focuses on factors influencing their distribution into the nervous system, evidence they enter brain parenchyma, and nervous system responses. Gold is emphasized as a model metal-based nanoparticle and for risk assessment in the companion review. The anatomy and physiology of the nervous system, basics of colloid chemistry, and environmental factors that influence what cells see are reviewed to provide background on the biological, physical-chemical, and internal milieu factors that influence nervous system nanoparticle uptake. The results of literature searches reveal little nanoparticle research included the nervous system, which about equally involved in vitro and in vivo methods, and very few human studies. The routes of uptake into the nervous system and mechanisms of nanoparticle uptake by cells are presented with examples. Brain nanoparticle uptake inversely correlates with size. The influence of shape has not been reported. Surface charge has not been clearly shown to affect flux across the blood-brain barrier. There is very little evidence for metal-based nanoparticle distribution into brain parenchyma. Metal-based nanoparticle disruption of the blood-brain barrier and adverse brain changes have been shown, and are more pronounced for spheres than rods. Study concentrations need to be put in exposure contexts. Work with dorsal root ganglion cells and brain cells in vitro show the potential for metal-based nanoparticles to produce toxicity. Interpretation of these results must consider the ability of nanoparticles to distribute across the barriers protecting the nervous system. Effects of the persistence of poorly soluble metal-based nanoparticles are of particular concern. Copyright © 2013 Wiley Periodicals, Inc.

Metals in albatross feathers from Midway Atoll: Influence of species, age, and nest location

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burger, J.; Gochfeld, M.

2000-03-01

In this paper the authors examine the concentrations of metals (heavy metals, mercury, lead, cadmium, chromium, manganese, tin; and metalloids, arsenic and selenium), in the down and contour (body) feathers of half-grown young albatrosses, and contour feathers of one of their parents. They collected feathers from Laysan Diomedea immutabilis and black-footed Diomedea nigripes albatrosses from Midway Atoll in the central Pacific Ocean. The authors test the null hypotheses that there is no difference in metal levels as a function of species, age, feather type, and location on the island. Using linear regression they found significant models accounting for the variationmore » in the concentrations of mercury, lead, cadmium, selenium, chromium, and manganese (but not arsenic or tin) as a function of feather type (all metals), collection location (all metals but lead), species (selenium only), and interactions between these factors. Most metals (except mercury, arsenic, and tin) were significantly higher in down than in the contour feathers of either chicks or adults. Comparing the two species, black-footed albatross chicks had higher levels of most elements (except arsenic) in their feathers and/or down. Black-footed adults had significantly higher levels of mercury and selenium. They also collected down and feathers from Laysan albatross chicks whose nests were close to buildings, including buildings with flaking lead paint and those that had been lead-abated.« less

29 CFR 98.860 - What factors may influence the debarring official's decision?

Code of Federal Regulations, 2010 CFR

2010-07-01

... your present responsibility. In making a debarment decision, the debarring official may consider the... 29 Labor 1 2010-07-01 2010-07-01 true What factors may influence the debarring official's decision... (NONPROCUREMENT) Debarment § 98.860 What factors may influence the debarring official's decision? This section...

Trophic ecology influence on metal bioaccumulation in marine fish: Inference from stable isotope and fatty acid analyses.

PubMed

Le Croizier, Gaël; Schaal, Gauthier; Gallon, Régis; Fall, Massal; Le Grand, Fabienne; Munaron, Jean-Marie; Rouget, Marie-Laure; Machu, Eric; Le Loc'h, François; Laë, Raymond; De Morais, Luis Tito

2016-12-15

The link between trophic ecology and metal accumulation in marine fish species was investigated through a multi-tracers approach combining fatty acid (FA) and stable isotope (SI) analyses on fish from two contrasted sites on the coast of Senegal, one subjected to anthropogenic metal effluents and another one less impacted. The concentrations of thirteen trace metal elements (As, Cd, Co, Cr, Cu, Fe, Li, Mn, Ni, Pb, Sn, U, and Zn) were measured in fish liver. Individuals from each site were classified into three distinct groups according to their liver FA and muscle SI compositions. Trace element concentrations were tested between groups revealing that bioaccumulation of several metals was clearly dependent on the trophic guild of fish. Furthermore, correlations between individual trophic markers and trace metals gave new insights into the determination of their origin. Fatty acids revealed relationships between the dietary regimes and metal accumulation that were not detected with stable isotopes, possibly due to the trace metal elements analysed in this study. In the region exposed to metallic inputs, the consumption of benthic preys was the main pathway for metal transfer to the fish community while in the unaffected one, pelagic preys represented the main source of metals. Within pelagic sources, metallic transfer to fish depended on phytoplankton taxa on which the food web was based, suggesting that microphytoplankton (i.e., diatoms and dinoflagellates) were a more important source of exposition than nano- and picoplankton. This study confirmed the influence of diet in the metal accumulation of marine fish communities, and proved that FAs are very useful and complementary tools to SIs to link metal accumulation in fish with their trophic ecology. Copyright © 2016 Elsevier B.V. All rights reserved.

Chemodynamics of heavy metals in long-term contaminated soils: metal speciation in soil solution.

PubMed

Kim, Kwon-Rae; Owens, Gary

2009-01-01

The concentration and speciation of heavy metals in soil solution isolated from long-term contaminated soils were investigated. The soil solution was extracted at 70% maximum water holding capacity (MWHC) after equilibration for 24 h. The free metal concentrations (Cd2+, CU2+, Pb2+, and Zn2+) in soil solution were determined using the Donnan membrane technique (DMT). Initially the DMT was validated using artificial solutions where the percentage of free metal ions were significantly correlated with the percentages predicted using MINTEQA2. However, there was a significant difference between the absolute free ion concentrations predicted by MINTEQA2 and the values determined by the DMT. This was due to the significant metal adsorption onto the cation exchange membrane used in the DMT with 20%, 28%, 44%, and 8% mass loss of the initial total concentration of Cd, Cu, Pb, and Zn in solution, respectively. This could result in a significant error in the determination of free metal ions when using DMT if no allowance for membrane cation adsorption was made. Relative to the total soluble metal concentrations the amounts of free Cd2+ (3%-52%) and Zn2+ (11%-72%) in soil solutions were generally higher than those of Cu2+ (0.2%-30%) and Pb2+ (0.6%-10%). Among the key soil solution properties, dissolved heavy metal concentrations were the most significant factor governing free metal ion concentrations. Soil solution pH showed only a weak relationship with free metal ion partitioning coefficients (K(p)) and dissolved organic carbon did not show any significant influence on K(p).

Investigating the atomic level influencing factors of glass forming ability in NiAl and CuZr metallic glasses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sedighi, Sina; Kirk, Donald Walter; Singh, Chandra Veer, E-mail: chandraveer.singh@utoronto.ca

2015-09-21

Bulk metallic glasses are a relatively new class of amorphous metal alloy which possess unique mechanical and magnetic properties. The specific concentrations and combinations of alloy elements needed to prevent crystallization during melt quenching remains poorly understood. A correlation between atomic properties that can explain some of the previously identified glass forming ability (GFA) anomalies of the NiAl and CuZr systems has been identified, with these findings likely extensible to other transition metal–transition metal and transition metal–metalloid (TM–M) alloy classes as a whole. In this work, molecular dynamics simulation methods are utilized to study thermodynamic, kinetic, and structural properties ofmore » equiatomic CuZr and NiAl metallic glasses in an attempt to further understand the underlying connections between glass forming ability, nature of atomic level bonding, short and medium range ordering, and the evolution of structure and relaxation properties in the disordered phase. The anomalous breakdown of the fragility parameter as a useful GFA indicator in TM–M alloy systems is addressed through an in-depth investigation of bulk stiffness properties and the evolution of (pseudo)Gruneisen parameters over the quench domain, with the efficacy of other common glass forming ability indicators similarly being analyzed through direct computation in respective CuZr and NiAl systems. Comparison of fractional liquid-crystal density differences in the two systems revealed 2-3 times higher values for the NiAl system, providing further support for its efficacy as a general purpose GFA indicator.« less

Influence of solid-liquid separation method parameters employed in soil leaching tests on apparent metal concentration.

PubMed

Imoto, Yukari; Yasutaka, Tetsuo; Someya, Masayuki; Higashino, Kazuo

2018-05-15

Soil leaching tests are commonly used to evaluate the leachability of hazardous materials, such as heavy metals, from the soil. Batch leaching tests often enhance soil colloidal mobility and may require solid-liquid separation procedures to remove excess soil particles. However, batch leaching test results depend on particles that can pass through a 0.45μm membrane filter and are influenced by test parameters such as centrifugal intensity and filtration volume per filter. To evaluate these parameters, we conducted batch leaching experiments using metal-contaminated soils and focused on the centrifugal intensity and filtration volume per filter used in solid-liquid separation methods currently employed in standard leaching tests. Our experiments showed that both centrifugal intensity and filtration volume per filter affected the reproducibility of batch leaching tests for some soil types. The results demonstrated that metal concentrations in the filtrates significantly differed according to the centrifugal intensity when it was 3000 g for 2h or less. Increased filtration volume per filter led to significant decreases in filtrate metal concentrations when filter cakes formed during filtration. Comparison of the filtration tests using 0.10 and 0.45μm membrane filters showed statistically significant differences in turbidity and metal concentration. These findings suggest that colloidal particles were not adequately removed from the extract and contributed substantially to the apparent metal concentrations in the leaching test of soil containing colloidal metals. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Phytoremediation of Heavy Metals in Contaminated Water and Soil Using Miscanthus sp. Goedae-Uksae 1.

PubMed

Bang, Jihye; Kamala-Kannan, Seralathan; Lee, Kui-Jae; Cho, Min; Kim, Chang-Hwan; Kim, Young-Jin; Bae, Jong-Hyang; Kim, Kyong-Ho; Myung, Hyun; Oh, Byung-Taek

2015-01-01

The aim of this study is to characterize the heavy metal phytoremediation potential of Miscanthus sp. Goedae-Uksae 1, a hybrid, perennial, bio-energy crop developed in South Korea. Six different metals (As, Cu, Pb, Ni, Cd, and Zn) were used for the study. The hybrid grass effectively absorbed all the metals from contaminated soil. The maximum removal was observed for As (97.7%), and minimum removal was observed for Zn (42.9%). Similarly, Goedae-Uksae 1 absorbed all the metals from contaminated water except As. Cd, Pb, and Zn were completely (100%) removed from contaminated water samples. Generally, the concentration of metals in roots was several folds higher than in shoots. Initial concentration of metals highly influenced the phytoremediation rate. The results of the bioconcentration factor, translocation factor, and enrichment coefficient tests indicate that Goedae-Uksae 1 could be used for phytoremediation in a marginally contaminated ecosystem.

Factors influencing societal response of nanotechnology: an expert stakeholder analysis.

PubMed

Gupta, Nidhi; Fischer, Arnout R H; van der Lans, Ivo A; Frewer, Lynn J

2012-05-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11051-012-0857-x) contains supplementary material, which is available to authorized users.

Effects of metal-contaminated soils on the accumulation of heavy metals in gotu kola (Centella asiatica) and the potential health risks: a study in Peninsular Malaysia.

PubMed

Ong, Ghim Hock; Wong, Ling Shing; Tan, Ai Li; Yap, Chee Kong

2016-01-01

Centella asiatica is a commonly used medicinal plant in Malaysia. As heavy metal accumulation in medicinal plants which are highly consumed by human is a serious issue, thus the assessment of heavy metals in C. asiatica is important for the safety of consumers. In this study, the heavy metal accumulation in C. asiatica and the potential health risks were investigated. Samples of C. asiatica and surface soils were collected from nine different sites around Peninsular Malaysia. The concentration of six heavy metals namely Cd, Cu, Ni, Fe, Pb and Zn were determined by air-acetylene flame atomic absorption spectrophotometer (AAS). The degree of anthropogenic influence was assessed by calculating the enrichment factor (EF) and index of geoaccumulation (Igeo). The heavy metal uptake into the plant was estimated through the calculation of translocation factor (TF), bioconcentration factor (BCF) and correlation study. Estimated daily intakes (EDI) and target hazard quotients (THQ) were used to determine the potential health risk of consuming C. asiatica. The results showed that the overall surface soil was polluted by Cd, Cu and Pb, while the uptake of Zn and Ni by the plants was high. The value of EDI and THQ showed that the potential of Pb toxicity in C. asiatica was high as well. As heavy metal accumulation was confirmed in C. asiatica, daily consumption of the plant derived from polluted sites in Malaysia was not recommended.

Factors influencing the pathways in response to complaints.

PubMed

Hsieh, Sophie Yahui

2010-01-01

The purpose of this paper is to explore hospital staff response to patient complaints and the factors influencing the response pathway. The paper uses an exploratory study in a large Taiwanese hospital purposefully chosen as a case study site. The critical incident technique (CIT) is implemented, using a questionnaire along with non-participant observations in which the results have been triangulated. A total of 59 cases were collected. The study found when facing "humaneness" complaints, hospital staff attempted to investigate the event and then explain the facts to the complainant or empathise with him/her and then refer the problem to the relevant unit. In response to complaints combining "communication" and "care/treatment and humaneness", staff tended to investigate the event's details and then directly explain them to the complainant. When complaints involved "care/treatment", staff tended to empathise with the complainant, investigate the facts and explain them to the complainant. Additionally, the organisational response to complaints was influenced by who made complaints; its type, severity, complaining method and patient status. The literature revealed that the case study is the most common organisational study method. However, this approach is criticised for not offering findings that can be generalised. Complaint nature is the major factor influencing the response pathway. If healthcare managers intend to reduce complaint rates then they need to carefully classify the complaint's nature. Different complaints have different handling procedures and guidelines to help managers resolve complaints in the first place. There are extensive studies focusing on investigating complaints and their resolution. These studies tend not to demonstrate various means of handling patient complaints. Neither do they describe how different complaints might lead to different outcomes. Therefore, this paper explores hospital staff response to patient complaints and the factors

Factors influencing the incidence of maxillofacial fractures.

PubMed

Chrcanovic, Bruno Ramos

2012-03-01

Maxillofacial injuries occur in a significant proportion of trauma patients. Trauma causes considerable economic expense due to procedural costs, the time a patient is off work, and the associated loss of income. For these reasons, it is an important health and economic issue. The aim of this study is to discuss the factors that may influence the incidence of maxillofacial fractures. As it is necessary to determine trends to help guide the development of new methods of injury prevention, preventative measures are also discussed. An electronic search was undertaken in March 2011, including articles published between 1980 and 2011 with the terms "facial fractures" and "maxillofacial fractures" in the title. The texts of epidemiological studies were reviewed in order to identify factors that may influence the incidence of maxillofacial fractures. From the selected articles, ten factors were identified: age, gender, geographic region and cultural aspects, socioeconomic status, temporal and climatic influence, use of alcohol and drugs, compliance with road traffic legislation, domestic violence, osteoporosis, and etiology of the maxillofacial trauma. Care of injured patients should include not only management of the acute phase, but also combine preventive programs and interventional programs aimed at reducing the incidence of maxillofacial fractures. Therefore, there is a need to ensure strict compliance of traffic rules and regulations, implement improvement in automotive safety devices, organize prevention programs to minimize assaults, implement school education in alcohol abuse and handling potentially hostile situations (especially for men), improve protection during sporting activities, and legislate wearing of protective headgear in workers. Preventive strategies remain the cheapest way to reduce direct and indirect costs of the sequelae of trauma. Societal attitudes and behaviors must be modified before a significant reduction in the incidence of maxillofacial

Do acid volatile sulfides (AVS) influence the accumulation of sediment-bound metals to benthic invertebrates under natural field conditions?

PubMed

De Jonge, Maarten; Dreesen, Freja; De Paepe, Josefina; Blust, Ronny; Bervoets, Lieven

2009-06-15

The present study evaluates the influence of acid volatile sulfides (AVS) on accumulation of sediment-bound metals in benthic invertebrates under natural field conditions. Natural sediments, pore water, surface water, and two species of widespread benthic invertebrates (Chironomus gr. thummi and Tubifex tubifex) were collected from 17 historical polluted Flemish lowland rivers and measured for metal concentrations. Different sediment characteristics were determined (AVS, organic matter, clay content) and multiple regression was used to study their relationship with accumulated metals in the invertebrates. Physical and chemical analysis of the field samples indicated low metal concentrations in the water and pore water, but very high metal concentrations in the sediment and the invertebrates, especially for Pb (5.99 micromol/ g). In general, metal accumulation in chironomids and tubificid worms was most strongly correlated with total metal concentrations in the sediment and sediment metal concentrations normalized for organic matter and clay content. Following the results of the linear regression model, AVS did not turn out to be a significant variable in describing variation in metal accumulation. Our study clearly demonstrates that, in addition to the results gained from experiments under lab conditions, benthic invertebrates can accumulate metals from unspiked field sediments even when there's an excess of AVS.

Organizational factors influencing successful primary care and public health collaboration.

PubMed

Valaitis, Ruta; Meagher-Stewart, Donna; Martin-Misener, Ruth; Wong, Sabrina T; MacDonald, Marjorie; O'Mara, Linda

2018-06-07

Public health and primary care are distinct sectors within western health care systems. Within each sector, work is carried out in the context of organizations, for example, public health units and primary care clinics. Building on a scoping literature review, our study aimed to identify the influencing factors within these organizations that affect the ability of these health care sectors to collaborate with one another in the Canadian context. Relationships between these factors were also explored. We conducted an interpretive descriptive qualitative study involving in-depth interviews with 74 key informants from three provinces, one each in western, central and eastern Canada, and others representing national organizations, government, or associations. The sample included policy makers, managers, and direct service providers in public health and primary care. Seven major organizational influencing factors on collaboration were identified: 1) Clear Mandates, Vision, and Goals; 2) Strategic Coordination and Communication Mechanisms between Partners; 3) Formal Organizational Leaders as Collaborative Champions; 4) Collaborative Organizational Culture; 5) Optimal Use of Resources; 6) Optimal Use of Human Resources; and 7) Collaborative Approaches to Programs and Services Delivery. While each influencing factor was distinct, the many interactions among these influences are indicative of the complex nature of public health and primary care collaboration. These results can be useful for those working to set up new or maintain existing collaborations with public health and primary care which may or may not include other organizations.

Comparative characterization of sewage sludge compost and soil: Heavy metal leaching characteristics.

PubMed

Fang, Wen; Wei, Yonghong; Liu, Jianguo

2016-06-05

The leaching and accumulation of heavy metals are major concerns following the land application of sewage sludge compost (SSC). We comparatively characterized SSC, the reference soil, and the SSC amended soil to investigate their similarities and differences regarding heavy metal leaching behavior and then to evaluate the effect of SSC land application on the leaching behavior of soil. Results showed that organic matter, including both of particulate organic matter (POM) and dissolved organic matter (DOM), were critical factors influencing heavy metal leaching from both of SSC and the soil. When SSC was applied to soil at the application rate of 48t/ha, the increase of DOM content slightly enhanced heavy metal leaching from the amended soil over the applicable pH domain (6influence on the leaching behavior of heavy metals. The geochemical speciation modeling revealed that heavy metal speciation in the solid phase were similar between the reference soil and the amended soil. Copyright © 2016 Elsevier B.V. All rights reserved.

INTERACTION OF LASER RADIATION WITH MATTER: Influence of surface breakdown on the process of drilling metals with pulsed CO2 laser radiation

NASA Astrophysics Data System (ADS)

Arutyunyan, R. V.; Baranov, V. Yu; Bobkov, I. V.; Bol'shov, Leonid A.; Dolgov, V. A.; Kanevskiĭ, M. F.; Malyuta, D. D.; Mezhevov, V. S.

1988-03-01

A report is given of the influence of low-threshold surface optical breakdown, occurring under the action of short (~ 5-μs) radiation pulses from a CO2 laser, on the process of the laser drilling of metals. Data are given on the difference between the interaction of radiation pulses having the same duration but differing in shape. A study was made of the influence of the pressure of the atmosphere surrounding a target on the results of laser drilling of metals. A theoretical explanation is given of the experimental results.

Research on Influencing Factors of Salespeople's Empowerment Readiness in Green Energy Enterprise

NASA Astrophysics Data System (ADS)

Dong, Yuan; Liu, Xiaohui

As market competition in green energy enterprises continues to intensify, marketing activities are enlarging and customer demand is increasingly growing and diversifying. More and more green energy enterprises have empowered their own salespeople. And managers in green energy enterprises are more concerned with the issues which employees suit to be empowered and which factors will influence employee empowerment readiness. This paper proposes the definition of salespeople's empowerment readiness, analyzes influencing factors of salespeople's empowerment readiness, discusses the effect mechanism of influencing factors of salespeople's empowerment readiness, finally, and puts forward some suggestions to enhance salespeople's empowerment readiness from the perspective of human resource management practice.

Factors Which Influence The Fish Purchasing Decision: A study on Traditional Market in Riau Mainland

NASA Astrophysics Data System (ADS)

Siswati, Latifa; Putri, Asgami

2018-05-01

The purposes of the research are to analyze and assess the factors which influence fish purchasing by the community at Tenayan Raya district Pekanbaru.Research methodology which used is survey method, especially interview and observation technique or direct supervision on the market which located at Tenayan Raya district. Determination technique of sampling location/region is done by purposive sampling. The sampling method is done by accidental sampling. Technique analysis of factors which used using the data that derived from the respondent opinion to various fish variable. The result of this research are the factors which influence fish purchasing decision done in a traditional market which located at Tenayan Raya district are product factor, price factors, social factor and individual factor. Product factor which influences fish purchasing decision as follows: the eyelets condition, the nutrition of fresh fish, the diversity of sold fish. Price factors influence the fish purchasing decision, such as: the price of fresh fish, the convincing price and the suitability price and benefits of the fresh fish. Individual factors which influence a fish purchasing decision, such as education and income levels. Social factors which influence a fish purchasing decision, such as family, colleagues and feeding habits of fish.

Factors Influencing Dietary Fat Intake among Black Emerging Adults

ERIC Educational Resources Information Center

Horton, Shalonda E. B.; Timmerman, Gayle M.; Brown, Adama

2018-01-01

Objective: To determine what factors influenced dietary fat intake (DFI) among black emerging adults. Participants: Sample included 251 black emerging adults, ages 18-25 years, living in the US. Methods: This was a nonexperimental cross-sectional study based on self-report data. Results: The sample had high DFI. Factors related to DFI were gender…

Factors influencing elderly women's mammography screening decisions: implications for counseling.

PubMed

Schonberg, Mara A; McCarthy, Ellen P; York, Meghan; Davis, Roger B; Marcantonio, Edward R

2007-11-16

Although guidelines recommend that clinicians consider life expectancy before screening older women for breast cancer, many older women with limited life expectancies are screened. We aimed to identify factors important to mammography screening decisions among women aged 80 and older compared to women aged 65-79. Telephone surveys of 107 women aged 80+ and 93 women aged 65-79 randomly selected from one academic primary care practice who were able to communicate in English (60% response rate). The survey addressed the following factors in regards to older women's mammography screening decisions: perceived importance of a history of breast disease, family history of breast cancer, doctor's recommendations, habit, reassurance, previous experience, mailed reminder cards, family/friend's recommendations or experience with breast cancer, age, health, and media. The survey also assessed older women's preferred role in decision making around mammography screening. Of the 200 women, 65.5% were non-Hispanic white and 82.8% were in good to excellent health. Most (81.3%) had undergone mammography in the past 2 years. Regardless of age, older women ranked doctor's recommendations as the most important factor influencing their decision to get screened. Habit and reassurance were the next two highly ranked factors influencing older women to get screened. Among women who did not get screened, women aged 80 and older ranked age and doctor's counseling as the most influential factors and women aged 65-79 ranked a previous negative experience with mammography as the most important factor. There were no significant differences in preferred role in decision-making around mammography screening by age, however, most women in both age groups preferred to make the final decision on their own (46.6% of women aged 80+ and 50.5% of women aged 65-79). While a doctor's recommendation is the most important factor influencing elderly women's mammography screening decisions, habit and reassurance

Factors influencing exacerbation-related self-management in patients with COPD: a qualitative study.

PubMed

Korpershoek, Yjg; Vervoort, Scjm; Nijssen, Lit; Trappenburg, Jca; Schuurmans, M J

2016-01-01

In patients with COPD, self-management skills are important to reduce the impact of exacerbations. However, both detection and adequate response to exacerbations appear to be difficult for some patients. Little is known about the underlying process of exacerbation-related self-management. Therefore, the objective of this study was to identify and explain the underlying process of exacerbation-related self-management behavior. A qualitative study using semi-structured in-depth interviews was performed according to the grounded theory approach, following a cyclic process in which data collection and data analysis alternated. Fifteen patients (male n=8; age range 59-88 years) with mild to very severe COPD were recruited from primary and secondary care settings in the Netherlands, in 2015. Several patterns in exacerbation-related self-management behavior were identified, and a conceptual model describing factors influencing exacerbation-related self-management was developed. Acceptance, knowledge, experiences with exacerbations, perceived severity of symptoms and social support were important factors influencing exacerbation-related self-management. Specific factors influencing recognition of exacerbations were heterogeneity of exacerbations and habituation to symptoms. Feelings of fear, perceived influence on exacerbation course, patient beliefs, ambivalence toward treatment, trust in health care providers and self-empowerment were identified as specific factors influencing self-management actions. This study provided insight into factors influencing exacerbation-related self-management behavior in COPD patients. The conceptual model can be used as a framework for health care professionals providing self-management support. In the development of future self-management interventions, factors influencing the process of exacerbation-related self-management should be taken into account.

Factors influencing endometrial thickness in postmenopausal women.

PubMed

Hebbar, S; Chaya, V; Rai, L; Ramachandran, A

2014-07-01

Cut-off values for endometrial thickness (ET) in asymptomatic postmenopausal woman have been standardized. However, there are no comprehensive studies to document how various factors can influence the ET after the age of menopause. To study the various factors influencing the ET in postmenopausal women. This was a prospective observational study. A total of 110 postmenopausal women underwent detailed history taking, clinical examination, and transvaginal scan for uterine volume and ovarian volume. The volumes were calculated by using ellipsoid formula: Width × thickness × height × 0.523. The variation in ET with respect to the influencing factors such as age, duration of menopause, parity, body mass index (BMI), medical illness like diabetes/hypertension, drugs like tamoxifen, presence of myoma, uterine volume, ovarian volume, and serum estradiol (in selected patients) were measured. Descriptive analysis was performed using SPSS software (version 16, Chicago II, USA) to obtain mean, standard deviation (SD), 95% confidence intervals (CIs) and inter quartile ranges. Comparison of means was carried out using analysis of variance. The mean (SD) age of the patients was 55.4 (6.91) years (95% CI, 54.1, 56.7). The mean (SD) age at menopause was 47.95 (3.90) years (95% CI, 47.2, 48.7) and the mean (SD) duration of menopause was 7.27 (6.65) years (95% CI, 6.01, 8.53). The mean (SD) ET was 3.8 (2.3) mm (95% CI, 3.36, 4.23). Medical illness like diabetes and hypertension did not alter the ET. ET increased as BMI increased and it was statistically significant. The presence of myoma increased uterine volume significantly and was associated with thick endometrial stripe. Similarly, whenever the ovaries were visualized and as the ovarian volume increased, there was an increase in ET. When ET was > 4 mm (n = 37), they were offered endocel, of which 16 agreed to undergo the procedure. None were found to have endometrial cancer. This study suggests that parity, BMI, presence of

Factors Influencing Adjustment to Late-Life Divorce.

ERIC Educational Resources Information Center

Wilson, Keren Brown; DeShane, Michael R.

Although the rate of divorce among older Americans has increased steadily, little attention has been paid to late life divorce. To describe the role of age and other factors which might influence adjustment to divorce in later life, data from a larger pilot study were used: 81 divorced persons over the age of 60 completed in-depth, structured…

The influence of natural factors on the spatio-temporal distribution of Oncomelania hupensis.

PubMed

Cheng, Gong; Li, Dan; Zhuang, Dafang; Wang, Yong

2016-12-01

We analyzed the influence of natural factors, such as temperature, rainfall, vegetation and hydrology, on the spatio-temporal distribution of Oncomelania hupensis and explored the leading factors influencing these parameters. The results will provide reference methods and theoretical a basis for the schistosomiasis control. GIS (Geographic Information System) spatial display and analysis were used to describe the spatio-temporal distribution of Oncomelania hupensis in the study area (Dongting Lake in Hunan Province) from 2004 to 2011. Correlation analysis was used to detect the natural factors associated with the spatio-temporal distribution of O. hupensis. Spatial regression analysis was used to quantitatively analyze the effects of related natural factors on the spatio-temporal distribution of snails and explore the dominant factors influencing this parameter. (1) Overall, the spatio-temporal distribution of O. hupensis was governed by the comprehensive effects of natural factors. In the study area, the average density of living snails showed a downward trend, with the exception of a slight rebound in 2009. The density of living snails showed significant spatial clustering, and the degree of aggregation was initially weak but enhanced later. Regions with high snail density and towns with an HH distribution pattern were mostly distributed in the plain areas in the northwestern and inlet and outlet of the lake. (2) There were space-time differences in the influence of natural factors on the spatio-temporal distribution of O. hupensis. Temporally, the comprehensive influence of natural factors on snail distribution increased first and then decreased. Natural factors played an important role in snail distribution in 2005, 2006, 2010 and 2011. Spatially, it decreased from the northeast to the southwest. Snail distributions in more than 20 towns located along the Yuanshui River and on the west side of the Lishui River were less affected by natural factors, whereas

Factors Influencing the Effectiveness of Inventory Management in Manufacturing SMEs

NASA Astrophysics Data System (ADS)

Chan, Shiau Wei; Tasmin, R.; Nor Aziati, A. H.; Zuraidah Rasi, Raja; Ismail, Fadillah Binti; Yaw, Li Ping

2017-08-01

Effectiveness of inventory management is a vital part in the manufacturing organization to be more competitive. The previous studies have indicated that there are several factors influencing the effectiveness of inventory management in the organization but there is lack of researchers who carried out the research in the manufacturing small medium enterprise in Johor. Therefore, the purpose of this research is to identify the problem of inventory management faced by the manufacturing small medium enterprise and also to determine the factors that will influence the effectiveness of inventory management. In completing this research, 80 employees were selected randomly from the manufacturing small medium enterprise in Batu Pahat, Johor and they were requested to complete questionnaires. The result have shown that the problems of inventory management faced by manufacturing organization were underproduction, overproduction, stock out situation, delays in the delivery of raw materials and discrepancy of records. The factors, documentation/store records, planning, knowledge of employees/staff skill have shown to significantly influence the effectiveness of inventory management while the funds have shown slightly significant influence on the inventory management in manufacturing small medium enterprises. This quantitative study is important to the manufacturing organization in Malaysia because it provides the guidelines to the employers of manufacturing small medium enterprises in Batu Pahat, Johor.

Influence of Flue Gas Desulfurization Gypsum Amendments on Heavy Metal Distribution in Reclaimed Sodic Soils.

PubMed

Chen, Qun; Wang, Shujuan; Li, Yan; Zhang, Ning; Zhao, Bo; Zhuo, Yuqun; Chen, Changhe

2015-06-01

Although flue gas desulfurization (FGD) gypsum has become an effective soil amendment for sodic soil reclamation, it carries extra heavy metal contamination into the soil environment. The fate of heavy metals introduced by FGD gypsum in sodic or saline-alkali soils is still unclear. This work aims to investigate the effects of FGD gypsum addition on the heavy metal distributions in a sodic soil. Original soil samples were collected from typical sodic land in north China. Soil column leaching tests were conducted to investigate the influence of FGD gypsum addition on the soil properties, especially on distribution profiles of the heavy metals (Pb, Cd, Cr, As, and Hg) in the soil layers. Results showed that pH, electrical conductivity, and exchangeable sodium percentage in amended soils were significantly reduced from 10.2 to 8.46, 1.8 to 0.2 dS/m, and 18.14% to 1.28%, respectively. As and Hg concentrations in the soils were found to be positively correlated with FGD gypsum added. The amount of Hg in the leachate was positively correlated with FGD gypsum application ratio, whereas a negative correlation was observed between the Pb concentration in the leachate and the FGD gypsum ratio. Results revealed that heavy metal concentrations in soils complied well with Environmental Quality Standard for Soils in China (GB15618-1995). This work helps to understand the fate of FGD gypsum-introduced heavy metals in sodic soils and provides a baseline for further environmental risk assessment associated with applying FGD gypsum for sodic soil remediation.

Influence of Flue Gas Desulfurization Gypsum Amendments on Heavy Metal Distribution in Reclaimed Sodic Soils

PubMed Central

Chen, Qun; Wang, Shujuan; Li, Yan; Zhang, Ning; Zhao, Bo; Zhuo, Yuqun; Chen, Changhe

2015-01-01

Abstract Although flue gas desulfurization (FGD) gypsum has become an effective soil amendment for sodic soil reclamation, it carries extra heavy metal contamination into the soil environment. The fate of heavy metals introduced by FGD gypsum in sodic or saline–alkali soils is still unclear. This work aims to investigate the effects of FGD gypsum addition on the heavy metal distributions in a sodic soil. Original soil samples were collected from typical sodic land in north China. Soil column leaching tests were conducted to investigate the influence of FGD gypsum addition on the soil properties, especially on distribution profiles of the heavy metals (Pb, Cd, Cr, As, and Hg) in the soil layers. Results showed that pH, electrical conductivity, and exchangeable sodium percentage in amended soils were significantly reduced from 10.2 to 8.46, 1.8 to 0.2 dS/m, and 18.14% to 1.28%, respectively. As and Hg concentrations in the soils were found to be positively correlated with FGD gypsum added. The amount of Hg in the leachate was positively correlated with FGD gypsum application ratio, whereas a negative correlation was observed between the Pb concentration in the leachate and the FGD gypsum ratio. Results revealed that heavy metal concentrations in soils complied well with Environmental Quality Standard for Soils in China (GB15618-1995). This work helps to understand the fate of FGD gypsum-introduced heavy metals in sodic soils and provides a baseline for further environmental risk assessment associated with applying FGD gypsum for sodic soil remediation. PMID:26064038

Lessons Learned with Metallized Gelled Propellants

NASA Technical Reports Server (NTRS)

1996-01-01

During testing of metallized gelled propellants in a rocket engine, many changes had to be made to the normal test program for traditional liquid propellants. The lessons learned during the testing and the solutions for many of the new operational conditions posed with gelled fuels will help future programs run more smoothly. The major factors that influenced the success of the testing were propellant settling, piston-cylinder tank operation, control of self pressurization, capture of metal oxide particles, and a gelled-fuel protective layer. In these ongoing rocket combustion experiments at the NASA Lewis Research Center, metallized, gelled liquid propellants are used in a small modular engine that produces 30 to 40 lb of thrust. Traditional liquid RP-1 and gelled RP-1 with 0-, 5-, and 55-wt% loadings of aluminum are used with gaseous oxygen as the oxidizer. The figure compares the thrust chamber efficiencies of different engines.

Heavy metals (Pb, Cd, As and MeHg) as risk factors for cognitive dysfunction: A general review of metal mixture mechanism in brain.

PubMed

Karri, Venkatanaidu; Schuhmacher, Marta; Kumar, Vikas

2016-12-01

Human exposure to toxic heavy metals is a global challenge. Concurrent exposure of heavy metals, such as lead (Pb), cadmium (Cd), arsenic (As) and methylmercury (MeHg) are particularly important due to their long lasting effects on the brain. The exact toxicological mechanisms invoked by exposure to mixtures of the metals Pb, Cd, As and MeHg are still unclear, however they share many common pathways for causing cognitive dysfunction. The combination of metals may produce additive/synergetic effects due to their common binding affinity with NMDA receptor (Pb, As, MeHg), Na + - K + ATP-ase pump (Cd, MeHg), biological Ca +2 (Pb, Cd, MeHg), Glu neurotransmitter (Pb, MeHg), which can lead to imbalance between the pro-oxidant elements (ROS) and the antioxidants (reducing elements). In this process, ROS dominates the antioxidants factors such as GPx, GS, GSH, MT-III, Catalase, SOD, BDNF, and CERB, and finally leads to cognitive dysfunction. The present review illustrates an account of the current knowledge about the individual metal induced cognitive dysfunction mechanisms and analyse common Mode of Actions (MOAs) of quaternary metal mixture (Pb, Cd, As, MeHg). This review aims to help advancement in mixture toxicology and development of next generation predictive model (such as PBPK/PD) combining both kinetic and dynamic interactions of metals. Copyright © 2016 Elsevier B.V. All rights reserved.

Factors influencing the occupational trajectory of patients with systemic sclerosis: a qualitative study.

PubMed

Decuman, Saskia; Smith, Vanessa; Grypdonck, Maria; De Keyser, Filip; Verhaeghe, Sofie

2015-01-01

To describe, from the patient's point of view, the factors influencing the occupational trajectory of patients with systemic sclerosis (SSc). This was a qualitative study designed using grounded theory with constant comparison. Data were collected through semi-structured interviews with 14 patients who fulfilled the American College of Rheumatology or Leroy-Medsger criteria for SSc. Based on our interviews, we found that the occupational trajectory of patients with SSc is influenced by the continuous interplay between four groups of factors. The first group concerns the values patients attribute to work, including identity, normality, financial value, social contact, and structure. The meaning of these values and how they relate to each other underlies the desire to work. A second group of factors is those influencing the balance between daily life, work participation, and medical condition (e.g. job content, flexibility in organising work, and the willingness to ask for accommodations at work). The occupational trajectory is also influenced by external factors, including availability of support, know-ledge of the disease, pressure to work, contact with medical professionals, and existing regulations and the patient's knowledge about them. Finally, the occupational trajectory is influenced by personal factors, including socio-demographics, psychological assets, and disease- and work-related personal factors. The decisions patients with SSc take concerning work depend on an interplay between many factors and, especially, on the patients' personal interpretation of these factors. These need to be taken into account when helping patients with SSc determine their occupational trajectory.

Factors Influencing New RNs' Supervisory Performance in Long-Term Care Facilities.

PubMed

Prentice, Dawn; Boscart, Veronique; McGilton, Katherine S; Escrig, Astrid

2017-12-01

In long-term care facilities (LTCF), registered nurses (RNs) perform both clinical and supervisory roles as part of a team aiming to provide high-quality care to residents. The residents have several co-morbidities and complex care needs. Unfortunately, new RNs receive minimal preparation in gerontology and supervisory experience during their program, leading to low retention rates and affecting resident outcomes. This qualitative study explored factors that influence supervisory performance of new RNs in LTCF from the perspective of 24 participants from Ontario, Canada. Data were collected through individual interviews, followed by a directed content analysis. Three levels of influences were identified: personal influences, organizational influences, and external influences. Each level presented with sub-elements, further describing the factors that impact the supervisory performance of the new RN. To retain new RNs in LTC, organizations must provide additional gerontological education and mentoring for new RNs to flourish in their supervisory roles.

The influence of food quantity on metal bioaccumulation and reproduction in fathead minnows (Pimephales promelas) during chronic exposures to a metal mine effluent.

PubMed

Ouellet, Jacob D; Dubé, Monique G; Niyogi, Som

2013-05-01

Metal mine effluents can impact fish in the receiving environment via both direct effects from exposure as well as indirect effects via food web. The main objective of the present study was to assess whether an indirect effect such as reduced food (prey) availability could influence metal accumulation and reproductive capacity in fish during chronic exposure to a metal mine effluent. Breeding pairs of fathead minnows (Pimephales promelas) were exposed to either reference water (RW) or an environmentally relevant metal mine effluent [45 percent process water effluent (PWE)] for 21 days and fed either low food quantities [LF (a daily ration of 6-10 percent body weight)] or normal food quantities [NF (a daily ration of 20-30 percent body weight)] in artificial stream systems. Fish in RW treatments were fed Chironomus dilutus larvae cultured in RW (Treatments: RW-NF or RW-LF), while fish in PWE treatments were fed C. dilutus larvae cultured in PWE (Treatments: PWE-NF or PWE-LF). Tissue-specific (gill, liver, gonad and carcass) metal accumulation, egg production, and morphometric parameters in fish were analyzed. Fathead minnows that were exposed to LF rations had significantly smaller body, gonad and liver sizes, and were in a relatively poor condition compared to fathead minnows exposed to NF rations, regardless of the treatment water type (RW or PWE) (two-way ANOVA; p<0.05). Although elevated concentrations of copper, nickel, rubidium, selenium, and thallium were recorded in C. dilutus cultured in PWE, only the concentrations of rubidium, selenium and thallium increased in tissues of fish in PWE treatments. Interestingly though, despite the greater abundance of metal-contaminated food in the PWE-NF treatment, tissue metal accumulation pattern were almost similar between the PWE-NF and PWE-LF treatments, except for higher liver barium, cobalt and manganese concentrations in the latter treatment. This indicated that a higher food ration could help reduce the tissue

Factors influencing food choice of athletes at international competition events.

PubMed

Pelly, Fiona E; Burkhart, Sarah J; Dunn, Peter

2018-02-01

Although the nutrient requirements and dietary intake of athletes have been thoroughly investigated, little is known about the influences on their food choice, particularly prior to and during competition. This study sought to investigate factors that influence food selection of athletes at two similar international competition events: the Melbourne 2006 and Delhi 2010 Commonwealth Games. A secondary aim was to explore differences in these factors between at each event given the culturally diverse locations. A survey developed for this study was distributed to athletes in the village dining hall at both events. Athletes scored a selection of factors influencing food choice on a scale of 1 (not important) to 5 (very important). A total of 769 individuals completed the questionnaire in total, with 351 (46%) from Delhi and 418 (54%) from Melbourne. Overall, athletes rated nutrient composition (M = 4.22), stage of competition (M = 4.09), time of day (M = 4.02) and familiarity of the food (M = 4.07) higher than sensory properties (smell M = 3.88; visual appearance M = 3.22) when making a food selection. Visual appearance (p = 0.01), stage of competition (p < 0.001) and time of day (p = 0.01) had greater influence in Delhi than Melbourne. Overall, a significantly higher proportion of female athletes rated smell (p < 0.001) and familiar food (p < 0.001) as important compared to males. The stage of competition and nutrition composition was rated as very important by the greatest proportion of athletes from weight category sports (61.9%) and endurance sports (57.9%) respectively. The influence of the coach and team mates was less of an influence than other factors, but more so for athletes from Non-Western regions. Further investigation of the various determinants and motives for food section of athletes from a range of sports and cultures is warranted. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors influencing deprescribing habits among geriatricians.

PubMed

Ní Chróinín, Danielle; Ní Chróinín, Chantelle; Beveridge, Alexander

2015-07-01

deprescribing habits among physicians managing older, frailer, cognitively impaired patients have not been well investigated. an anonymised electronic survey was disseminated to all members of an international geriatric society/local advanced trainee network (N = 930). This comprised a Likert-scale analysis of factors influencing desprescribing, and five case vignettes, detailing a patient with progressive cognitive impairment and dependency, on a background of ischaemic heart disease and hypertension. among 134 respondents (response rate 14.4%), 47.4% were female, 48.9% aged 36-50 years and 84.1% specialists (15.9% trainees). Respondents commonly rated limited life expectancy (96.2%) and cognitive impairment (84.1%) as very/extremely important to deprescribing practices. On multivariable analysis, older respondents less commonly rated functional dependency (odds ratio [OR] 0.22 per change in age category; P < 0.001) and limited life expectancy (OR 0.09, P = 0.04) important when deprescribing, while female participants (OR 3.03, P < 0.001) and trainees (versus specialists OR 14.29, P < 0.001) more often rated adherence to evidence-based guidelines important. As vignettes described increasing dependency and cognitive impairment, physicians were more likely to stop donepezil, aspirin, atorvastatin and antihypertensives (all P < 0.001 for trend). Aspirin (93.6%) and ramipril (94.1%) were most commonly deprescribed. Commonest reasons cited for deprescribing medications were 'dementia severity', followed by pill burden. in this exploratory analysis, geriatricians rated limited life expectancy and cognitive impairment very important in driving deprescribing practices. Geriatricians more often deprescribed multiple medications in the setting of advancing dependency and cognitive impairment, driven by dementia severity and pill burden concerns. Physician characteristics also influence deprescribing practices. Further exploration of factors influencing deprescribing

[History of heavy metal pollution from tidal flat in Haizhou Bay].

PubMed

Zhang, Rui; Zhang, Fan; Liu, Fu-Cheng; Yin, Fu-Jun; Ding, Ying-Jun; Gao, Jin-Rong; Chen, Jing; Shao, Wei

2013-03-01

Coastal zone could be considered as an important sink of regional source to sink and preserve historical records of environmental evolution. Four sediment cores, collected from tidal flat at Haizhou Bay near Lianyungang City, were examined for concentrations of heavy metals including Cd, Cr, Cu, Mn, Pb and Zn in core sediments to investigate the historical input of trace metals. In addition, sediment rates of cores LH3 and LH4 were determined based on radionuclide 210Pb. The results showed that grain size control effect was not the main factor that influenced the distribution of heavy metals. Heavy metals concentrations in the surface sediments were higher than these regional background values. Furthermore, Al element as a proxy of grain size was selected for normalization and calculation of metal enrichment factor (EF) and anthropogenic heavy metal fluxes. The results revealed that heavy metals in tidal flats were continuously enriched in the past decades, meanwhile, tidal flats have been significantly subjected to contaminations due to anthropogenic activities. Moreover, the depth profiles of heavy metals fluxes correspond to scenario of social-economy development of Lianyungang, which is an important urban area near Haizhou Bay. From 1950s to 2005, anthropogenic fluxes of metals increased with fluctuations, whereas, since 2005 anthropogenic fluxes declined, which may be correlated to the adjustment of industrial structure as well as the strengthened environmental regulation.

Influencing the arc and the mechanical properties of the weld metal in GMA-welding processes by additive elements on the wire electrode surface

NASA Astrophysics Data System (ADS)

Wesling, V.; Schram, A.; Müller, T.; Treutler, K.

2016-03-01

Under the premise of an increasing scarcity of raw materials and increasing demands on construction materials, the mechanical properties of steels and its joints are gaining highly important. In particular high- and highest-strength steels are getting in the focus of the research and the manufacturing industry. To the same extent, the requirements for filler metals are increasing as well. At present, these low-alloy materials are protected by a copper coating (<1μm) against corrosion. In addition, the coating realizes a good ohmic contact and good sliding properties between the welding machine and the wire during the welding process. By exchanging the copper with other elements it should be possible to change the mechanical properties of the weld metal and the arc stability during gas metal arc welding processes and keep the basic functions of the coating nearly untouched. On a laboratory scale solid wire electrodes with coatings of various elements and compounds such as titanium oxide were made and processed with a Gas Metal Arc Welding process. During the processing a different process behavior between the wire electrodes, coated and original, could be observed. The influences ranges from greater/shorter arc-length over increasing/decreasing droplets to larger/smaller arc foot point. Furthermore, the weld metal of the coated electrodes has significantly different mechanical and technological characteristics as the weld metal from the copper coated ground wire. The yield strength and tensile strength can be increased by up to 50%. In addition, the chemical composition of the weld metal was influenced by the application of coatings with layer thicknesses to 15 microns in the lower percentage range (up to about 3%). Another effect of the coating is a modified penetration. The normally occurring “argon finger” can be suppressed or enhanced by the choice of the coating. With the help of the presented studies it will be shown that Gas Metal Arc Welding processes

Influence of low impact development construction on pollutant process of road-deposited sediments and associated heavy metals.

PubMed

Ma, Yukun; Gong, Manli; Zhao, Hongtao; Li, Xuyong

2018-02-01

Intense Low-Impact Development (LID) construction in China could lead to increasingly severe stormwater and receiving water pollution due to the lack of appropriate regulation for mitigating pollution from LID construction. Samples of road-deposited sediments (RDS) were collected from 50 study sites at seven LID construction stages and four road hierarchies to analyze the pollution process and determine the size of the region influenced by LID construction. Six heavy metals were analyzed, and the RDS index model was adopted to estimate the potential heavy metal load washed off by stormwater runoff. Analysis of variance revealed that the excavation and gravel filling of rain gardens and excavation of porous pavements were critical LID construction stages that contributed the largest masses of RDS per unit area to road surfaces. Although the concentration of heavy metals at LID construction sites was lower than at sites without LID construction, the load of heavy metals washed off from LID construction was much higher. In addition, the sizes of regions influenced by accumulated RDS from LID construction descended in the following order: arterial road (600-775m)>collector road (150-200m)>access road (100-150m)>laneway (20-30m). According to the characteristics of LID construction at the study sites, the potential total solid loads in stormwater throughout China were estimated to reach 36,694t by 2020 and 146,777t by 2030. According to the results of analysis, several recommendations are provided for designing LID construction regulations to mitigate stormwater pollution. Copyright © 2017 Elsevier B.V. All rights reserved.

Influencing Factors of the Initiation Point in the Parachute-Bomb Dynamic Detonation System

NASA Astrophysics Data System (ADS)

Qizhong, Li; Ye, Wang; Zhongqi, Wang; Chunhua, Bai

2017-12-01

The parachute system has been widely applied in modern armament design, especially for the fuel-air explosives. Because detonation of fuel-air explosives occurs during flight, it is necessary to investigate the influences of the initiation point to ensure successful dynamic detonation. In fact, the initiating position exist the falling area in the fuels, due to the error of influencing factors. In this paper, the major influencing factors of initiation point were explored with airdrop and the regularity between initiation point area and factors were obtained. Based on the regularity, the volume equation of initiation point area was established to predict the range of initiation point in the fuel. The analysis results showed that the initiation point appeared area, scattered on account of the error of attitude angle, secondary initiation charge velocity, and delay time. The attitude angle was the major influencing factors on a horizontal axis. On the contrary, secondary initiation charge velocity and delay time were the major influencing factors on a horizontal axis. Overall, the geometries of initiation point area were sector coupled with the errors of the attitude angle, secondary initiation charge velocity, and delay time.

[Prevalence and influence factors of hypertension among mechanic factory workers].

PubMed

Pang, Li-Juan; Chen, Li-Zhang; Fu, Ben-Yan

2005-06-01

To determine the status and influence factors of hypertension on mechanic factory workers and to provide reference for further hypertension prevention and control. A cross-sectional study on 1205 workers (exposed to different noise levels) in Hunan was carried out by using questionaire and measuring the blood pressure of the workers and the noise exposure level in the workplace. The prevalence and the influence factors of hypertension among mechanic factory workers were analysed. The hypertension prevalence was 12.1%. Logistic regression analysis showed the body weight index (BMI), age, and history of hypertension in parents and accumulative noise dose levels influenced the hypertension prevalence. Controlling the body weight, reducing alcohol consumption, decreasing the sound pressure level in workshops and advocating healthy diet may reduce the prevalence rate of hypertension among mechanic factory workers.

Proposed framework for thermomechanical life modeling of metal matrix composites

NASA Technical Reports Server (NTRS)

Halford, Gary R.; Lerch, Bradley A.; Saltsman, James F.

1993-01-01

The framework of a mechanics of materials model is proposed for thermomechanical fatigue (TMF) life prediction of unidirectional, continuous-fiber metal matrix composites (MMC's). Axially loaded MMC test samples are analyzed as structural components whose fatigue lives are governed by local stress-strain conditions resulting from combined interactions of the matrix, interfacial layer, and fiber constituents. The metallic matrix is identified as the vehicle for tracking fatigue crack initiation and propagation. The proposed framework has three major elements. First, TMF flow and failure characteristics of in situ matrix material are approximated from tests of unreinforced matrix material, and matrix TMF life prediction equations are numerically calibrated. The macrocrack initiation fatigue life of the matrix material is divided into microcrack initiation and microcrack propagation phases. Second, the influencing factors created by the presence of fibers and interfaces are analyzed, characterized, and documented in equation form. Some of the influences act on the microcrack initiation portion of the matrix fatigue life, others on the microcrack propagation life, while some affect both. Influencing factors include coefficient of thermal expansion mismatch strains, residual (mean) stresses, multiaxial stress states, off-axis fibers, internal stress concentrations, multiple initiation sites, nonuniform fiber spacing, fiber debonding, interfacial layers and cracking, fractured fibers, fiber deflections of crack fronts, fiber bridging of matrix cracks, and internal oxidation along internal interfaces. Equations exist for some, but not all, of the currently identified influencing factors. The third element is the inclusion of overriding influences such as maximum tensile strain limits of brittle fibers that could cause local fractures and ensuing catastrophic failure of surrounding matrix material. Some experimental data exist for assessing the plausibility of the proposed

Factors Influencing New Entrant Dairy Farmer's Decision-Making Process around Technology Adoption

ERIC Educational Resources Information Center

McDonald, Roberta; Heanue, Kevin; Pierce, Karina; Horan, Brendan

2016-01-01

Purpose: The aims of this paper are to (1) evaluate the main factors influencing grazing system technology adoption among new entrant (NE) dairy farmers within Europe and the Irish pasture-based dairy industry, and (2) to determine the extent to which economic factors influence decision-making around technology adoption and use among NEs to the…

Sexual Maturity and Life Stage Influences Toxic Metal Accumulation in Croatian Brown Bears.

PubMed

Lazarus, Maja; Sekovanić, Ankica; Orct, Tatjana; Reljić, Slaven; Jurasović, Jasna; Huber, Đuro

2018-02-01

The influence of reproductive and (early) life stages on toxic metal levels was investigated in the brown bear (Ursus arctos), the largest mammalian predator species in Croatia. The purpose was to examine critical clusters in a population that might be at a higher risk of adverse health effects caused by metals as environmental contaminants. Levels of cadmium, mercury and lead in muscle, liver and kidney cortex of 325 male and 139 female bears, quantified by inductively coupled plasma mass spectrometry, were analysed according to distinct bear life stages (young: cub, yearling, subadult; mature: adult). Metal levels did not differ among sexes in young animals (< 4 years), except for mercury in muscles (higher in females), and adult females had higher cadmium and mercury. A trend of renal cadmium accumulation with age in immature male animals disappeared once they reached maturity, whereas for females this trend has only slowly declined in mature compared to immature bears. In early life stage (< 1 year), bear cubs had lower cadmium, comparable mercury, and higher lead in the kidneys than the bears of the following age category (yearlings). Due to a higher proportion of renal lead transfer from the mother to the cub compared with cadmium, it may be that the high burden of cadmium found in kidneys of older females has lower toxicological concern for their cubs than the lead content. Sex, reproductive, and life stages of bears were confirmed as important in assessing toxic metal burden.

Partial structure factors reveal atomic dynamics in metallic alloy melts

NASA Astrophysics Data System (ADS)

Nowak, B.; Holland-Moritz, D.; Yang, F.; Voigtmann, Th.; Kordel, T.; Hansen, T. C.; Meyer, A.

2017-07-01

We investigate the dynamical decoupling of the diffusion coefficients of the different components in a metallic alloy melt, using a combination of neutron diffraction, isotopic substitution, and electrostatic levitation in Zr-Ni melts. We show that excess Ni atoms can diffuse more freely in a background of saturated chemical interaction, causing their dynamics to become much faster and thus decoupled than anticipated from the interparticle interactions. Based on the mode-coupling theory of the glass transition, the averaged structure as given by the partial static structure factors is able to explain the observed dynamical behavior.

Logistic Regression and Path Analysis Method to Analyze Factors influencing Students’ Achievement

NASA Astrophysics Data System (ADS)

Noeryanti, N.; Suryowati, K.; Setyawan, Y.; Aulia, R. R.

2018-04-01

Students' academic achievement cannot be separated from the influence of two factors namely internal and external factors. The first factors of the student (internal factors) consist of intelligence (X1), health (X2), interest (X3), and motivation of students (X4). The external factors consist of family environment (X5), school environment (X6), and society environment (X7). The objects of this research are eighth grade students of the school year 2016/2017 at SMPN 1 Jiwan Madiun sampled by using simple random sampling. Primary data are obtained by distributing questionnaires. The method used in this study is binary logistic regression analysis that aims to identify internal and external factors that affect student’s achievement and how the trends of them. Path Analysis was used to determine the factors that influence directly, indirectly or totally on student’s achievement. Based on the results of binary logistic regression, variables that affect student’s achievement are interest and motivation. And based on the results obtained by path analysis, factors that have a direct impact on student’s achievement are students’ interest (59%) and students’ motivation (27%). While the factors that have indirect influences on students’ achievement, are family environment (97%) and school environment (37).

[Coagulation factor VII levels in uremic patients and theirs influence factors].

PubMed

Fang, Jun; Xia, Ling-Hui; Wei, Wen-Ning; Song, Shan-Jun

2004-12-01

This study was aimed to investigate coagulation factor VII level in uremic patients with chronic renal failure and to explore theirs influence factors. The plasma levels of coagulation factor VII were detected in 30 uremic patients with chronic renal failure before and after hemodialysis for 1 month, the factor VII activity (FVII:C) was determined by one-stage coagulation method, while activated factor VII (FVIIa) was measured by one-stage coagulation method using recombinant soluble tissue factor, and factor VII antigen was detected by ELISA. The results showed that: (1) The FVIIa, FVII:C and FVIIAg levels in chronic uremic patients before hemodialysis were 4.00 +/- 0.86 microg/L, (148.5 +/- 40.4)% and (99.8 +/- 21.1)% respectively, which were significantly increased, as compared with healthy controls [2.77 +/- 1.02 microg/L, (113.1 +/- 33.0)% and (73.7 +/- 18.3)% respectively, P < 0.05]. (2) After hemodialysis the FVIIa, FVII:C and FVIIAg levels in uremic patients significantly enhanced to 5.56 +/- 1.45 microg/L, (200.8 +/- 68.7)% and (124.1 +/- 19.3)% respectively (P < 0.05). (3) The abnormal increase of coagulation factor VII was positively correlated with levels of blood uria nitrogen and serum creatinine before hemodialysis but not after hemodialysis. It is concluded that the enhanced levels of coagulation factor VII in chronic uremic patients suggested abnormal activated state, herperactivity and elevated production of factor VII which correlated with renal functional injury. The abnormality of factor VII in uremia may be aggravated by hemodialysis. Coagulation factor (FVII) may be a risk factor for cardiovascular events in uremic patients who especially had been accepted long-term hemodialysis.

Automation bias: empirical results assessing influencing factors.

PubMed

Goddard, Kate; Roudsari, Abdul; Wyatt, Jeremy C

2014-05-01

To investigate the rate of automation bias - the propensity of people to over rely on automated advice and the factors associated with it. Tested factors were attitudinal - trust and confidence, non-attitudinal - decision support experience and clinical experience, and environmental - task difficulty. The paradigm of simulated decision support advice within a prescribing context was used. The study employed within participant before-after design, whereby 26 UK NHS General Practitioners were shown 20 hypothetical prescribing scenarios with prevalidated correct and incorrect answers - advice was incorrect in 6 scenarios. They were asked to prescribe for each case, followed by being shown simulated advice. Participants were then asked whether they wished to change their prescription, and the post-advice prescription was recorded. Rate of overall decision switching was captured. Automation bias was measured by negative consultations - correct to incorrect prescription switching. Participants changed prescriptions in 22.5% of scenarios. The pre-advice accuracy rate of the clinicians was 50.38%, which improved to 58.27% post-advice. The CDSS improved the decision accuracy in 13.1% of prescribing cases. The rate of automation bias, as measured by decision switches from correct pre-advice, to incorrect post-advice was 5.2% of all cases - a net improvement of 8%. More immediate factors such as trust in the specific CDSS, decision confidence, and task difficulty influenced rate of decision switching. Lower clinical experience was associated with more decision switching. Age, DSS experience and trust in CDSS generally were not significantly associated with decision switching. This study adds to the literature surrounding automation bias in terms of its potential frequency and influencing factors. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Factors influencing a problem-based learning implementation: A case study of IT courses

NASA Astrophysics Data System (ADS)

Darus, Norida Muhd; Mohd, Haslina; Baharom, Fauziah; Saip, Mohamed Ali; Puteh, Nurnasran; Marzuki @ Matt, Zaharin; Husain, Mohd Zabidin; Yasin, Azman

2016-08-01

IT students must be trained to work efficiently as teamwork. One of the techniques that can be used to train them is through Problem-Based Learning (PBL) approach. The PBL implementation can be influenced by various factors depending on the ultimate goal of the study. This study is focusing on the IT students' perception of the PBL implementation. The student's perception is important to ensure the successfulness of the PBL implementation. Therefore, it is important to identify the factors that might influence the implementation of PBL of IT courses. This study aims to identify some catalyst factors that may influence the PBL implementation of IT courses. The study involved three (3) main phases: identifying PBL implementation factors, constructing a PBL model, and PBL model validation using statistical analysis. Four main factors are identified: PBL Characteristics, PBL Course Assessment, PBL Practices, and PBL Perception. Based on these four factors, a PBL model is constructed. Then, based on the proposed PBL model, four hypotheses are formulated and analyzed to validate the model. All hypotheses are significantly acceptable. The result shows that the PBL Characteristics and PBL Course Assessment factors are significantly influenced the PBL Practices and indirectly influenced the Students' Perception of the PBL Implementation for IT courses. This PBL model can assist decision makers in enhancing the PBL teaching and learning strategy for IT courses. It is also can be tested to other courses in the future.

A Survey of the Influencing Factors for International Academic Mobility of Chinese University Students

ERIC Educational Resources Information Center

Cao, Chun; Zhu, Chang; Meng, Qian

2016-01-01

This research aims to understand the factors influencing international academic mobility within the Chinese higher education context. The inventory of University Students' Perceptions of Influencing Factors for International Academic Mobility was developed and tested to enquire about Chinese university students' perceptions of factors influencing…

The influence of ergonomic factors and perceptual-motor abilities on handwriting performance.

PubMed

Tseng, M H; Cermak, S A

1993-10-01

Difficulty with handwriting is one of the most frequent reasons that children in the public schools are referred to occupational therapy. Current research on the influence of ergonomic factors, such as pencil grip and pressure, and perceptual-motor factors traditionally believed to affect handwriting, is reviewed. Factors such as visual perception show little relationship to handwriting, whereas tactile-kinesthetic, visual-motor, and motor planning appear to be more closely related to handwriting. By better understanding the ergonomic and perceptual-motor factors that contribute to and influence handwriting, therapists will be better able to design rationally based intervention programs.

Diurnal and seasonal trends and source apportionment of redox-active metals in Los Angeles using a novel online metal monitor and Positive Matrix Factorization (PMF)

NASA Astrophysics Data System (ADS)

Mousavi, Amirhosein; Sowlat, Mohammad H.; Sioutas, Constantinos

2018-02-01

In the present study, we identified the sources of four redox-active metals, including Iron (Fe), Chromium (Cr), Cupper (Cu), and Manganese (Mn) and quantified the contribution of these sources to PM2.5 concentrations in central Los Angeles, California, by employing time-resolved measurements (i.e., a time resolution of 2 h) with a recently developed online metal monitor and Positive Matrix Factorization (PMF). Size distribution of ambient PM (14 nm-10 μm) was measured using the Scanning Mobility Particle Sizer (SMPS) and Optical Particle Sizer (OPS). Auxiliary variables were also collected, including elemental (EC) and organic carbon (OC), gaseous pollutants (NO2 and O3), meteorological parameters (including relative humidity (RH) and temperature), and traffic data (for heavy- (HDVs) and light-duty vehicles (LDVs)). A 4-factor solution was found to be optimum for the chemically-speciated dataset, whereas a 5-factor solution appeared to be most plausible for the size distribution data. The factors included fresh traffic, soil/road dust, urban background aerosol, secondary aerosol, and nucleation (only resolved for the size distribution data). Fresh traffic was the major contributor to Fe and Cu concentrations, whereas Cr was mostly found in the urban background aerosol (reflecting a mixture of small local sources as well as aged traffic emissions), and Mn mostly came from both soil/road dust and was to a lesser degree found in urban background aerosol. Secondary aerosol did not contribute to the concentrations of any of these metals, but was associated with very high loading of OC, as expected. Even though the urban background aerosol and secondary aerosol appeared to be characterized by "aged" particles and have a rather homogeneous spatial distribution, the reactions and processes involved in their formation are entirely different. Our results provide insights into the sources of redox-active metals in central Los Angeles. They also underscore the benefits of

Investigation of Fundamental Modeling and Thermal Performance Issues for a Metallic Thermal Protection System Design

NASA Technical Reports Server (NTRS)

Blosser, Max L.

2002-01-01

A study was performed to develop an understanding of the key factors that govern the performance of metallic thermal protection systems for reusable launch vehicles. A current advanced metallic thermal protection system (TPS) concept was systematically analyzed to discover the most important factors governing the thermal performance of metallic TPS. A large number of relevant factors that influence the thermal analysis and thermal performance of metallic TPS were identified and quantified. Detailed finite element models were developed for predicting the thermal performance of design variations of the advanced metallic TPS concept mounted on a simple, unstiffened structure. The computational models were also used, in an automated iterative procedure, for sizing the metallic TPS to maintain the structure below a specified temperature limit. A statistical sensitivity analysis method, based on orthogonal matrix techniques used in robust design, was used to quantify and rank the relative importance of the various modeling and design factors considered in this study. Results of the study indicate that radiation, even in small gaps between panels, can reduce significantly the thermal performance of metallic TPS, so that gaps should be eliminated by design if possible. Thermal performance was also shown to be sensitive to several analytical assumptions that should be chosen carefully. One of the factors that was found to have the greatest effect on thermal performance is the heat capacity of the underlying structure. Therefore the structure and TPS should be designed concurrently.

What factors influence cataract waiting list time?

PubMed Central

Churchill, A.; Vize, C.; Stewart, O.; Backhouse, O.

2000-01-01

AIMS—To determine whether there were any specific factors that influenced waiting list time (WLT) for patients undergoing cataract surgery.
METHODS—70 preoperative cataract patients were interviewed by one of the authors using a questionnaire to score visual acuity, coexisting ocular pathology and disabilities, threat to independent living/employment, and perceived visual handicap for detailed, gross, and driving vision. Individuals were analysed separately according to whether it was their first or second cataract operation.
RESULTS—The median WLT for first eye surgery was 9 months (n = 31) and 13 months for second eye surgery (n = 36). The WLT ranged from 2 to 25 months for first eyes and 0.25-18 months for second eyes. Where there was a perceived threat to independent living or employment the WLT was found to be significantly shorter than the median. A high overall score correlated with a shorter WLT. Surgical priority was also given to individuals with anisometropia >3 dioptres.
CONCLUSION—This study has demonstrated that there are specific factors that influence clinicians when prioritising patients for cataract surgery.

 PMID:10729304

The influence of the structure of the metal load removal from liquid steel in electric arc furnaces

NASA Astrophysics Data System (ADS)

Pǎcurar, Cristina; Hepuť, Teodor; Crisan, Eugen

2016-06-01

One of the main technical and economic indicators in the steel industry and steel respectively the development it is the removal of liquid steel. This indicator depends on several factors, namely technology: the structure and the quality metal load, the degree of preparedness of it, and the content of non-metallic material accompanying the unit of drawing up, the technology for the elaboration, etc. research has been taken into account in drawing up steel electric arc furnace type spring EBT (Electric Bottom taping), seeking to load and removing components of liquid steel. Metal load has been composed of eight metal grades, in some cases with great differences in terms of quality. Data obtained were processed in the EXCEL spreadsheet programs and MATLAB, the results obtained being presented both graphically and analytically. On the basis of the results obtained may opt for a load optimal structure metal.

Decomposition Mechanism and Decomposition Promoting Factors of Waste Hard Metal for Zinc Decomposition Process (ZDP)

NASA Astrophysics Data System (ADS)

Pee, J. H.; Kim, Y. J.; Kim, J. Y.; Seong, N. E.; Cho, W. S.; Kim, K. J.

2011-10-01

Decomposition promoting factors and decomposition mechanism in the zinc decomposition process of waste hard metals which are composed mostly of tungsten carbide and cobalt were evaluated. Zinc volatility amount was suppressed and zinc steam pressure was produced in the reaction graphite crucible inside an electric furnace for ZDP. Reaction was done for 2 hrs at 650 °C, which 100 % decomposed the waste hard metals that were over 30 mm thick. As for the separation-decomposition of waste hard metals, zinc melted alloy formed a liquid composed of a mixture of γ-β1 phase from the cobalt binder layer (reaction interface). The volume of reacted zone was expanded and the waste hard metal layer was decomposed-separated horizontally from the hard metal. Zinc used in the ZDP process was almost completely removed-collected by decantation and volatilization-collection process at 1000 °C. The small amount of zinc remaining in the tungsten carbide-cobalt powder which was completely decomposed was fully removed by using phosphate solution which had a slow cobalt dissolution speed.

22 CFR 1006.880 - What factors may influence the debarring official during reconsideration?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 2 2010-04-01 2010-04-01 true What factors may influence the debarring official during reconsideration? 1006.880 Section 1006.880 Foreign Relations INTER-AMERICAN FOUNDATION GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Debarment § 1006.880 What factors may influence the...

7 CFR 3017.880 - What factors may influence the debarring official during reconsideration?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false What factors may influence the debarring official during reconsideration? 3017.880 Section 3017.880 Agriculture Regulations of the Department of... DEBARMENT AND SUSPENSION (NONPROCUREMENT) Debarment § 3017.880 What factors may influence the debarring...

22 CFR 1508.880 - What factors may influence the debarring official during reconsideration?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 2 2010-04-01 2010-04-01 true What factors may influence the debarring official during reconsideration? 1508.880 Section 1508.880 Foreign Relations AFRICAN DEVELOPMENT FOUNDATION GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Debarment § 1508.880 What factors may influence the...

5 CFR 919.880 - What factors may influence the debarring official during reconsideration?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false What factors may influence the debarring official during reconsideration? 919.880 Section 919.880 Administrative Personnel OFFICE OF PERSONNEL... (NONPROCUREMENT) Debarment § 919.880 What factors may influence the debarring official during reconsideration? The...

Influence of the Surface Layer on the Electrochemical Deposition of Metals and Semiconductors into Mesoporous Silicon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chubenko, E. B., E-mail: eugene.chubenko@gmail.com; Redko, S. V.; Sherstnyov, A. I.

2016-03-15

The influence of the surface layer on the process of the electrochemical deposition of metals and semiconductors into porous silicon is studied. It is shown that the surface layer differs in structure and electrical characteristics from the host porous silicon bulk. It is established that a decrease in the conductivity of silicon crystallites that form the surface layer of porous silicon has a positive effect on the process of the filling of porous silicon with metals and semiconductors. This is demonstrated by the example of nickel and zinc oxide. The effect can be used for the formation of nanocomposite materialsmore » on the basis of porous silicon and nanostructures with a high aspect ratio.« less

Differential factors that influence applicant selection of a prosthodontic residency program.

PubMed

Blissett, Ryan; Lee, Meng-Chieh; Jimenez, Monik; Sukotjo, Cortino

2009-04-01

The main objectives of this study were to identify current prosthodontic resident demographics and to analyze factors that may influence applicants in selecting prosthodontics as a career, as well as a specific prosthodontic program. We also investigated the influence of age, gender, relationship status, and year in program on applicant decisions. Two questionnaires were mailed to all prosthodontic residents (N = 304) registered with the American College of Prosthodontists (ACP) Central Office. Part I assessed resident demographics and factors influencing choice of specialty. Part II assessed factors influencing the selection of a specific prosthodontic program. Completed surveys were obtained from 193 of 304 (63.4%) of all prosthodontic residents registered at the ACP Central Office. The completed surveys represented approximately 48% of the total population of prosthodontic residents in the United States. Demographic data revealed that 37% and 62% of the respondents were female and male, respectively (1% did not report gender). The mean age of the respondents was 30.3 years. More residents reported being married than either single or in a relationship. Most residents were accepted to their top choice program. Part I of the survey revealed that the complexity and challenge of treatment planning/treatment, ability to lead multidisciplinary cases, possession of skills/talents suited to the specialty, enjoyment of clinical work, and the intellectual content of the specialty were reported to be the five most influential factors in choosing prosthodontics as a career. Part II demonstrated that applicants place a high emphasis on clinical education, their impression of the program director, advice from predoctoral mentors, their impression of resident satisfaction and happiness, and the opportunity to place dental implants. The factors of least importance are climate and opportunities to moonlight, teach, and conduct research. Dental students consider the complexity and

Analysis of Spatial Pattern and Influencing Factors of E-Commerce

NASA Astrophysics Data System (ADS)

Zhang, Y.; Chen, J.; Zhang, S.

2017-09-01

This paper aims to study the relationship between e-commerce development and geographical characteristics using data of e-commerce, economy, Internet, express delivery and population from 2011 to 2015. Moran's I model and GWR model are applied to analyze the spatial pattern of E-commerce and its influencing factors. There is a growth trend of e-commerce from west to east, and it is obvious to see that e-commerce development has a space-time clustering, especially around the Yangtze River delta. The comprehensive factors caculated through PCA are described as fundamental social productivity, resident living standard and population sex structure. The first two factors have positive correlation with e-commerce, and the intensity of effect increases yearly. However, the influence of population sex structure on the E-commerce development is not significant. Our results suggest that the clustering of e-commerce has a downward trend and the impact of driving factors on e-commerce is observably distinct from year to year in space.

The dynamic effects of metal vapour in gas metal arc welding

NASA Astrophysics Data System (ADS)

Haidar, Jawad

2010-04-01

Numerical simulations for the dynamic effects of metal vapour in gas metal arc welding (GMAW) suggest that vapour from the welding droplet at the tip of the welding wire has a significant influence on the plasma properties. It is found that for the evaporation rates calculated for arcs in pure argon, the dynamic effects of metal vapour markedly cool down the plasma in the central region of the arc, leading to the formation of a low temperature zone centred on the arc axis, in agreement with experimental measurements in the literature. Radiation effects, omitted in this paper, may produce further cooling of the plasma gas. The results highlight major deficiencies in the common approach to modelling the GMAW process and suggest that accurate description of GMAW must include the influence of metal vapour on the plasma.

Factors influencing physicians' knowledge sharing on web medical forums.

PubMed

Lin, Tung Cheng; Lai, Ming Cheng; Yang, Shu Wen

2016-09-01

Web medical forums are relatively unique as knowledge-sharing platforms because physicians participate exclusively as knowledge contributors and not as knowledge recipients. Using the perspective of social exchange theory and considering both extrinsic and intrinsic motivations, this study aims to elicit the factors that significantly influence the willingness of physicians to share professional knowledge on web medical forums and develops a research model to explore the motivations that underlie physicians' knowledge-sharing attitudes. This model hypothesizes that constructs, including shared vision, reputation, altruism, and self-efficacy, positively influence these attitudes and, by extension, positively impact knowledge-sharing intention. A conventional sampling method and the direct recruitment of physicians at their outpatient clinic gathered valid data from a total of 164 physicians for analysis in the model. The empirical results support the validity of the proposed model and identified shared vision as the most significant factor of influence on knowledge-sharing attitudes, followed in descending order by knowledge-sharing self-efficacy, reputation, and altruism. © The Author(s) 2015.

Analysis on influencing factors of EV charging station planning based on AHP

NASA Astrophysics Data System (ADS)

Yan, F.; Ma, X. F.

2016-08-01

As a new means of transport, electric vehicle (EV) is of great significance to alleviate the energy crisis. EV charging station planning has a far-reaching significance for the development of EV industry. This paper analyzes the impact factors of EV charging station planning, and then uses the analytic hierarchy process (AHP) to carry on the further analysis to the influencing factors, finally it gets the weight of each influence factor, and provides the basis for the evaluation scheme of the planning of charging stations for EV.

Electrical properties of graphene-metal contacts.

PubMed

Cusati, Teresa; Fiori, Gianluca; Gahoi, Amit; Passi, Vikram; Lemme, Max C; Fortunelli, Alessandro; Iannaccone, Giuseppe

2017-07-11

The performance of devices and systems based on two-dimensional material systems depends critically on the quality of the contacts between 2D material and metal. A low contact resistance is an imperative requirement to consider graphene as a candidate material for electronic and optoelectronic devices. Unfortunately, measurements of contact resistance in the literature do not provide a consistent picture, due to limitations of current graphene technology, and to incomplete understanding of influencing factors. Here we show that the contact resistance is intrinsically dependent on graphene sheet resistance and on the chemistry of the graphene-metal interface. We present a physical model of the contacts based on ab-initio simulations and extensive experiments carried out on a large variety of samples with different graphene-metal contacts. Our model explains the spread in experimental results as due to uncontrolled graphene doping and suggests ways to engineer contact resistance. We also predict an achievable contact resistance of 30 Ω·μm for nickel electrodes, extremely promising for applications.

TRANSCRIPTION FACTOR ACTIVATION FOLLOWING EXPOSURE OF AN INTACT LUNG PREPARATION TO METALLIC PARTICULATE MATTER

EPA Science Inventory

TRANSCRIPTION FACTOR ACTIVATION FOLLOWING EXPOSURE OF AN INTACT LUNG PREPARATION TO METALLIC PARTICULATE MATTER

James M. Samet1,2, Robert Silbajoris1, Tony Huang1 and Ilona Jaspers3

1Human Studies Division, National Health and Environmental Effects Research Laborato...

Influence of gender and other factors on medical student specialty interest.

PubMed

Boyle, Veronica; Shulruf, Boaz; Poole, Phillippa

2014-09-12

Medical schools must select and educate to meet anticipated health needs. Factors influencing career choice include those of the student and their background as well as subsequent experience. Women have comprised over 50% of medical classes for over 20 years. This study describes gender patterns of current specialty interest among medical students at the University of Auckland, and models the predictive effect of gender compared to other career influencing factors. The study analysed career intention survey data from 711 graduating medical students (response rate, 79%) from 2006 to 2011. Interest level was highest for medicine, followed by subspecialty surgery, general practice and paediatrics. There were differences by gender for most specialties, but not for general practice. Women were more likely than men to be interested in Obstetrics and Gynaecology, Paediatrics, Geriatrics, Public Health or General Medicine, and less interested in Surgery, Anaesthesia, Emergency Medicine or post graduate study. Each specialty had a different pattern of influencing factors with the most important factor being the experience on a clinical attachment. Factors in career choice are complex and vary by gender and specialty. General practice levels of interest are too low for workforce needs. Predictive models need to be validated in longer term studies but may help guide selection and curriculum design.

2 CFR 180.880 - What factors may influence the debarring official during reconsideration?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false What factors may influence the debarring official during reconsideration? 180.880 Section 180.880 Grants and Agreements OFFICE OF MANAGEMENT AND... GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Debarment § 180.880 What factors may influence the...

34 CFR 85.880 - What factors may influence the debarring official during reconsideration?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false What factors may influence the debarring official during reconsideration? 85.880 Section 85.880 Education Office of the Secretary, Department of Education GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Debarment § 85.880 What factors may influence the...

Factors Influencing Residents' Satisfaction in Residential Aged Care

ERIC Educational Resources Information Center

Chou, Shu-Chiung; Boldy, Duncan P.; Lee, Andy H.

2003-01-01

Purpose: The aim of this study was to identify the important factors influencing residents' satisfaction in residential aged care and to provide a better understanding of their interrelationships. Design and Methods: A cross-sectional survey design was used to collect the required information, including resident satisfaction, resident dependency…

Factors that Influence Informal Learning in the Workplace

ERIC Educational Resources Information Center

Berg, Shelley A.; Chyung, Seung Youn

2008-01-01

Purpose: The purpose of this research is to investigate factors that influence informal learning in the workplace and the types of informal learning activities people engage in at work. More specifically, the research examined: the relationship between informal learning engagement and the presence of learning organization characteristics; and…

Factors Influencing Consumers Intention for Online Grocery Shopping - A Proposed Framework

NASA Astrophysics Data System (ADS)

Pauzi, SFF; Thoo, AC; Tan, LC; Muharam, FM; Talib, NA

2017-06-01

Nowadays, Internet is one of the most popular platforms for people to do online shopping including grocery items. Many studies have been conducted to investigate the determinants of customer intentions for online grocery shopping. Till now, there is no consensus on what are the factors that actually influencing people to shop grocery items through Internet. This paper aims to explore the factors such as social influences, facilitating conditions, hedonic motivations, perceived risk and perceived trust that influence the consumer intention to purchase grocery online. Questionnaires will be the main instrument of the study and they will be distributed to target respondents using Internet survey. Respondents of the study will be selected using convenience sampling. After data collection, Statistical Package for the Social Sciences (SPSS) will be employed for data analysis. Overall, the result of the study is important to retailers to identify the important factors in increasing their customers’ intention to purchase grocery online.

Ore grade decrease as life cycle impact indicator for metal scarcity: the case of copper.

PubMed

Vieira, Marisa D M; Goedkoop, Mark J; Storm, Per; Huijbregts, Mark A J

2012-12-04

In the life cycle assessment (LCA) of products, the increasing scarcity of metal resources is currently addressed in a preliminary way. Here, we propose a new method on the basis of global ore grade information to assess the importance of the extraction of metal resources in the life cycle of products. It is shown how characterization factors, reflecting the decrease in ore grade due to an increase in metal extraction, can be derived from cumulative ore grade-tonnage relationships. CFs were derived for three different types of copper deposits (porphyry, sediment-hosted, and volcanogenic massive sulfide). We tested the influence of the CF model (marginal vs average), mathematical distribution (loglogistic vs loglinear), and reserve estimate (ultimate reserve vs reserve base). For the marginal CFs, the statistical distribution choice and the estimate of the copper reserves introduce a difference of a factor of 1.0-5.0 and a factor of 1.2-1.7, respectively. For the average CFs, the differences are larger for these two choices, i.e. respectively a factor of 5.7-43 and a factor of 2.1-3.8. Comparing the marginal CFs with the average CFs, the differences are higher (a factor 1.7-94). This paper demonstrates that cumulative grade-tonnage relationships for metal extraction can be used in LCA to assess the relative importance of metal extractions.

Leadership styles of Finnish nurse managers and factors influencing it.

PubMed

Vesterinen, Soili; Isola, Arja; Paasivaara, Leena

2009-05-01

The purpose of the present study was to explore nurse managers' perceptions of their leadership styles and factors influencing it. It is a challenge for nurse managers to retain nurses in hospitals and to ensure a high quality of care in nursing practice. Leadership style is an important part of leadership. Knowledge concerning nurse managers' resonant and non-resonant leadership styles provides nurse managers with tools to reflect on their own leadership style. Open-ended, tape-recorded interviews were conducted with 13 nurse managers from five Finnish hospitals and two long-term care facilities. The data were analysed using qualitative content analysis. Five categories of leadership style were discerned: visionary, coaching, affiliate, democratic, commanding. Factors that influence leadership style were identified: earlier superiors, values, information, cooperation, employees and education. The results of this study show that Finnish nurse managers use both resonant and non-resonant leadership styles. The findings of this study show that nurse managers use a variety of leadership styles. The study demonstrates the importance of knowledge about leadership styles and factors influencing it among nurse managers providing future leadership and management education.

41 CFR 105-68.860 - What factors may influence the debarring official's decision?

Code of Federal Regulations, 2010 CFR

2010-07-01

... responsibility. In making a debarment decision, the debarring official may consider the following factors: (a... influence the debarring official's decision? 105-68.860 Section 105-68.860 Public Contracts and Property...) Debarment § 105-68.860 What factors may influence the debarring official's decision? This section lists the...

29 CFR 98.880 - What factors may influence the debarring official during reconsideration?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true What factors may influence the debarring official during reconsideration? 98.880 Section 98.880 Labor Office of the Secretary of Labor GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Debarment § 98.880 What factors may influence the debarring official during...

31 CFR 19.880 - What factors may influence the debarring official during reconsideration?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false What factors may influence the debarring official during reconsideration? 19.880 Section 19.880 Money and Finance: Treasury Office of the... factors may influence the debarring official during reconsideration? The debarring official may reduce or...

Determinants of occupational exposure to metals by gas metal arc welding and risk management measures: a biomonitoring study.

PubMed

Persoons, Renaud; Arnoux, Damien; Monssu, Théodora; Culié, Olivier; Roche, Gaëlle; Duffaud, Béatrice; Chalaye, Denis; Maitre, Anne

2014-12-01

Welding fumes contain various toxic metals including chromium (Cr), nickel (Ni) and manganese (Mn). An assessment of the risk to health of local and systemic exposure to welding fumes requires the assessment of both external and internal doses. The aims of this study were to test the relevance in small and medium sized enterprises of a biomonitoring strategy based on urine spot-samples, to characterize the factors influencing the internal doses of metals in gas metal arc welders and to recommend effective risk management measures. 137 welders were recruited and urinary levels of metals were measured by ICP-MS on post-shift samples collected at the end of the working week. Cr, Ni and Mn mean concentrations (respectively 0.43, 1.69 and 0.27 μg/g creatinine) were well below occupational health guidance values, but still higher than background levels observed in the general population, confirming the absorption of metals generated in welding fumes. Both welding parameters (nature of base metal, welding technique) and working conditions (confinement, welding and grinding durations, mechanical ventilation and welding experience) were predictive of occupational exposure. Our results confirm the interest of biomonitoring for assessing health risks and recommending risk management measures for welders. Copyright © 2014. Published by Elsevier Ireland Ltd.

Genetic Factors Influence Serological Measures of Common Infections

PubMed Central

Rubicz, Rohina; Leach, Charles T.; Kraig, Ellen; Dhurandhar, Nikhil V.; Duggirala, Ravindranath; Blangero, John; Yolken, Robert; Göring, Harald H.H.

2011-01-01

Background/Aims Antibodies against infectious pathogens provide information on past or present exposure to infectious agents. While host genetic factors are known to affect the immune response, the influence of genetic factors on antibody levels to common infectious agents is largely unknown. Here we test whether antibody levels for 13 common infections are significantly heritable. Methods IgG antibodies to Chlamydophila pneumoniae, Helicobacter pylori, Toxoplasma gondii, adenovirus 36 (Ad36), hepatitis A virus, influenza A and B, cytomegalovirus, Epstein-Barr virus, herpes simplex virus (HSV)-1 and −2, human herpesvirus-6, and varicella zoster virus were determined for 1,227 Mexican Americans. Both quantitative and dichotomous (seropositive/seronegative) traits were analyzed. Influences of genetic and shared environmental factors were estimated using variance components pedigree analysis, and sharing of underlying genetic factors among traits was investigated using bivariate analyses. Results Serological phenotypes were significantly heritable for most pathogens (h2 = 0.17–0.39), except for Ad36 and HSV-2. Shared environment was significant for several pathogens (c2 = 0.10–0.32). The underlying genetic etiology appears to be largely different for most pathogens. Conclusions Our results demonstrate, for the first time for many of these pathogens, that individual genetic differences of the human host contribute substantially to antibody levels to many common infectious agents, providing impetus for the identification of underlying genetic variants, which may be of clinical importance. PMID:21996708

Psychosocial Factors Influencing Competency of Children's Statements on Sexual Trauma

ERIC Educational Resources Information Center

Kim, Tae Kyung; Choi, Soul; Shin, Yee Jin

2011-01-01

Objectives: The objectives of this study are to assess children's competence to state their traumatic experience and to determine psychosocial factors influencing the competency of children's statements, such as emotional factors of children and parents and trauma-related variables, in Korean child sex abuse victims. Methods: We enrolled 214…

Exploring Factors Influencing Acceptance and Use of Video Digital Libraries

ERIC Educational Resources Information Center

Ju, Boryung; Albertson, Dan

2018-01-01

Introduction: This study examines the effects of certain key factors on users' intention to ultimately adopt and use video digital libraries for facilitating their information needs. The individual factors identified for this study, based on their given potential to influence use and acceptance of video digital libraries, were categorised for data…

Impurity effects in transition metal silicides

NASA Technical Reports Server (NTRS)

Lien, C.-D.; Nicolet, M.-A.

1984-01-01

Impurities can affect the properties of silicides directly by virtue of their presence. Impurities can also influence the processes by which silicides are formed. The effect of impurities on the reaction of transition metal films with a silicon substrate induced by thermal annealing are well documented. The interpretation of these results is discussed. It is shown that impurity redistribution is a major factor in determining how significant the effect of an impurity is. Redistribution observed for dopant impurities is also discussed.

Heavy metal pollution status and ecological risks of sediments under the influence of water transfers in Taihu Lake, China.

PubMed

Liu, Jiajia; Wang, Peifang; Wang, Chao; Qian, Jin; Hou, Jun

2017-01-01

The effects of water transfer projects on water channels and the receiving water involved need to be understood. In this research, the compositions and particle size distributions of surface sediment and the Cd, Cr, Cu, Ni, Pb, and Zn contents and distributions in the sediment along a water transfer route from the Wangyu River to Taihu Lake, China, were studied. The correlative relationship between the grain size trend and heavy metal content distribution suggested that heavy metals in Wangyu River sediment have affected the heavy metal contents of Taihu Lake sediment through silt and clay migrating in the transferred water. Enrichment factors and potential ecological risk values were calculated. Low levels of potential ecological risks are posed at 20 sampling sites in Taihu Lake, but higher-to-serious risks (potential ecological risk values >275) are posed at all Wangyu River sites. Toxicity of heavy metals (Cd, Cu, Zn, and Ni) in the Wangyu River sediments is more serious than those in the Taihu Lake, but is similar to the entrance of Gonghu Bay. Multivariate statistical analyses (Pearson correlation, cluster, and factor analyses) suggested heavy metals in the study area have many sources, and the relationships between particle migration and heavy metal contents indicated transferring water are likely to lead to adverse ecological risks being posed in Taihu Lake.

Prenatal environmental factors influencing IgE levels, atopy and early asthma.

PubMed

Peters, Junenette L; Boynton-Jarrett, Renée; Sandel, Megan

2013-04-01

There is increasing evidence that the prenatal window represents a critical period in which the developing immune system may be primed toward an allergic phenotype. Studies have investigated the role of a number of maternal environmental exposures on subsequent allergic disorders in the offspring. We summarize findings from recent studies on prenatal environmental factors influencing IgE levels, atopy, and early asthma. A building literature supports the influence of maternal exposure to environmental pollutants, such as allergens, traffic-related air pollution, tobacco smoke, and organochlorine compounds and social factors on allergic outcomes. More novel associations have been investigated, such as the effect of prenatal exposures to phthalates, bisphenol A, and magnetic fields. There is also rising interest in epigenetics as a pathway of action by which maternal exposure affect immune health. Emerging research highlights the challenges of investigating in-utero exposures and of relating exposures to such a heterogeneous and complex outcome as allergic disease. Further research is needed on the mechanisms by which prenatal exposure influences allergic response in childhood and how postnatal, familial and social factors, and sex can modify disease outcomes. Epigenetics is a promising new frontier, and likely one of several explanatory factors.

Factors influencing aircraft ground handling performance

NASA Technical Reports Server (NTRS)

Yager, T. J.

1983-01-01

Problems associated with aircraft ground handling operations on wet runways are discussed and major factors which influence tire/runway braking and cornering traction capability are identified including runway characteristics, tire hydroplaning, brake system anomalies, and pilot inputs. Research results from tests with instrumented ground vehicles and aircraft, and aircraft wet runway accident investigation are summarized to indicate the effects of different aircraft, tire, and runway parameters. Several promising means are described for improving tire/runway water drainage capability, brake system efficiency, and pilot training to help optimize aircraft traction performance on wet runways.

An Analysis of Selected Factors Influencing Enrollment Patterns.

ERIC Educational Resources Information Center

Heck, James

This report presents an analysis of factors influencing enrollment patterns at Lake City Community College (LCCC; Florida) and recommends ways to increase enrollments at the college. Section I reviews the methods of collecting data for the report, which included interviews with key college personnel, an examination of social indicators such as…

Factors Influencing the Readability of Student-Generated Texts.

ERIC Educational Resources Information Center

Allen, JoBeth

An investigation examined student-generated texts in terms of both traditional and more theoretically valid readability to determine what factors influence comprehension when children read their own, peer, and adult-written texts. Seventy dictated stories created in an earlier study, along with 4 first-grade level stories from the "Reader's…

Factors Influencing Teachers' Engagement in Informal Learning Activities

ERIC Educational Resources Information Center

Lohman, Margaret C.

2006-01-01

Purpose: The purpose of this study is to examine factors influencing the engagement of public school teachers in informal learning activities. Design/methodology/approach: This study used a survey research design. Findings: Analysis of the data found that teachers rely to a greater degree on interactive than on independent informal learning…

What Factors Influence Vietnamese Students' Choice of University?

ERIC Educational Resources Information Center

Dao, Mai Thi Ngoc; Thorpe, Anthony

2015-01-01

Purpose: The purpose of this paper is to report the factors that influence Vietnamese students' choice of university in a little researched context where the effects of globalization and education reform are changing higher education. Design/methodology/approach: A quantitative survey was completed by 1,124 current or recently completed university…

A Review: Advances on Absorption of Heavy Metals in the Waste Water by Biochar

NASA Astrophysics Data System (ADS)

Chen, Hao; Xie, Anbin; You, Shaohong

2018-01-01

Biochar as a new type of adsorbent, its physical and chemical characteristics and adsorption of heavy metal has been widely studied. Based on the current studies, the article reviewed the main characteristics of biochar, its influencing factors (preparation temperature, feed stocks, functional group et.) on adsorption of heavy metals in water and its mechanism of adsorption (ion exchange adsorption, complexation, precipitation sedimentation et.). Briefly summarize unresolved issues for potential applications of biochar in the future.

Paradigm shift of contamination risk of six heavy metals in tea (Camellia sinensis L.) growing soil: A new approach influenced by inorganic and organic amendments.

PubMed

Karak, Tanmoy; Bora, Krishnamoni; Paul, Ranjit Kumar; Das, Sampa; Khare, Puja; Dutta, Amrit Kumar; Boruah, Romesh Kumar

2017-09-15

The present study provides several contamination and ecological risk indices for selected metals (Cd, Cr, Cu, Mn, Ni and Zn) in tea (Camellia sinensis L.; cv. S.3A/3) growing soil influenced by lower to higher doses of inorganic and organic amendments. While ecological risk indices were applied, it was observed that same treatment showed different risk levels but contamination risk status did not vary significantly. All the indices showed significant correlation with heavy metals' concentration in young shoots of tea plants. As the indices characterized experimental soils with different extents of contamination, it would be important to standardize the indices with long term experiments followed by generation of new index. Therefore, we formulated a new contamination index named as Tea Research Association Heavy Metal Contamination Index (TRAHMCI) for tea growing soils. TRAHMCI is based on the probable change of metal status in soil with progress of growth of tea plant. This could be useful to negate discrepancies arised from use of various existing metal contamination indices in tea growing soils amended with different doses of fertilizers. TRAHMCI was formulated based on individual contamination factor using statistical technique and applied to the present dataset which provided a more holistic understanding of overall tea growing soil behavior. The limitation of the developed TRAHMCI index is that, the index had not been validated for other crops in our study not to claim its effective use for crops other than tea. As already mentioned, this new index had been formulated by taking tea as the test crop with above mentioned six heavy metal contents in young shoot and made tea. Copyright © 2017 Elsevier B.V. All rights reserved.

Total and labile metals in surface sediments of the tropical river-estuary system of Marabasco (Pacific coast of Mexico): Influence of an iron mine.

PubMed

Marmolejo-Rodríguez, Ana Judith; Prego, Ricardo; Meyer-Willerer, Alejandro; Shumilin, Evgueni; Cobelo-García, Antonio

2007-01-01

Marabasco is a tropical river-estuary system comprising the Marabasco river and the Barra de Navidad Lagoon. The river is impacted by the Peña Colorada iron mine, which produces 3.5 million tons of pellets per year. Thirteen surface sediment samples were collected in May 2005 (dry season) in order to establish background levels of Al, Cd, Co, Cu, Fe, Ni, Pb, and Zn in the system and to ascertain the potential mobility of metals in the sediments. Analyses were carried out in the fraction finer than 63 microm, and labile metals extracted according the BCR procedure. Certified reference materials were used for validation of methods. Total concentrations of Cd, Co, Cu, Ni, Pb, and Zn were in the range of 0.05-0.34, 6-95, 0.7-31, 9-26, 2-18, and 53-179 mgkg(-1), respectively; Al and Fe ranges of 24-127, and 26-69 mgg(-1) correspondingly. Cadmium was found to be significantly labile in the sediments (20-100%), followed by Co (0-35%), Ni (3-16%) and Zn (0-25%), whereas the labile fraction for Cu, Fe and Pb was almost negligible (<4%). According with the total metal concentrations, background levels and normalised enrichment factors (NEF) of the metals studied, the impact of the Peña Colorada iron mine on the Marabasco system is lower than expected when compared with other similar World systems influenced by mining activities.

Factors influencing enrollment of African Americans in the Look AHEAD trial

USDA-ARS?s Scientific Manuscript database

Many factors have been identified that influence the recruitment of African Americans into clinical trials; however, the influence of eligibility criteria may not be widely appreciated. We used the experience from the Look AHEAD (Action for Health in Diabetes) trial screening process to examine the ...

Factors influencing primary health care professionals' physical activity promotion behaviors: a systematic review.

PubMed

Huijg, Johanna M; Gebhardt, Winifred A; Verheijden, Marieke W; van der Zouwe, Nicolette; de Vries, Juriena D; Middelkoop, Barend J C; Crone, Mathilde R

2015-02-01

Despite the promising findings related to the efficacy of interventions aimed at promoting physical activity (PA) in primary health care (PHC), the translation of these interventions to PHC practice does not always happen as desired. To help understand why efficacious PHC-based PA interventions are not effectively translated to practice, this study systematically reviewed the literature on factors influencing PHC professionals' PA promotion practices. Literature searches were conducted in Web of Science, PubMed, and PsycINFO for peer-reviewed articles published in English from 1990 onwards. Studies were included that met the following criteria: (1) involving PHC-based PA interventions, and (2) reporting factors influencing PHC professionals' PA promotion behaviors. Two researchers independently screened studies and extracted data. A narrative synthesis using thematic analysis was conducted to identify factors. Of the 4,469 identified articles, 59 were included in the review. Factors were identified by qualitative methods, barrier/facilitator ratings, and the examination of the relationship between factors and PA promotion, and the effectiveness of introduction strategies. Many factors related to the development, delivery, and effects of the innovation, the sociopolitical and organizational culture, resources, and support, patient and PHC professional characteristics, and innovation strategies were identified as potential influences on PHC professionals' PA promotion practices. However, the lack of evidence on the relationship between factors and PA promotion indicated insufficient evidence on PA promotion determinants. This extensive overview of potential factors can inform intervention developers and implementers on which factors may play a role when introducing PA interventions in PHC. Future research should further investigate relationships between factors and PA promotion, which should be guided by qualitative in-depth knowledge on influencing factors.

Metal Nanomaterial Toxicity Variations Within the Vascular System

PubMed Central

Abukabda, Alaeddin B.; Stapleton, Phoebe A.; Nurkiewicz, Timothy R.

2016-01-01

Engineered nanomaterials (ENM) are anthropogenic materials with at least one dimension less than 100 nm. Their ubiquitous employment in biomedical and industrial applications in the absence of full toxicological assessments raises significant concerns over their safety on human health. This is a significant concern, especially for metal and metal oxide ENM as they may possess the greatest potential to impair human health. A large body of literature has developed that reflects adverse systemic effects associated with exposure to these materials, but an integrated mechanistic framework for how ENM exposure influences morbidity remains elusive. This may be due in large part to the tremendous diversity of existing ENM and the rate at which novel ENM are produced. In this review, the influence of specific ENM physicochemical characteristics and hemodynamic factors on cardiovascular toxicity are discussed. Additionally, the toxicity of metallic, and metal oxide ENM is presented in the context of the cardiovascular system and its discrete anatomical and functional components. Finally, future directions and understudied topics are presented. While it is clear that the nanotechnology boom has increased our interest in ENM toxicity, it is also evident that the field of cardiovascular nanotoxicology remains in its infancy and continued, expansive research is necessary in order to determine the mechanisms via which ENM exposure contributes to cardiovascular morbidity. PMID:27686080

Factors Influencing Technology Planning in Developing Countries: A Literature Review

ERIC Educational Resources Information Center

Keengwe, Jared; Malapile, Sandy

2014-01-01

This article is a literature review concerning the factors that play an important role in the development of educational technology plans in the educational system of developing countries (DCs). Largely, the technology plans are influenced by factors that emanates from within the country (internal) and those outside of their borders (external).…

Factors Influencing Psychological Help Seeking in Adults: A Qualitative Study

ERIC Educational Resources Information Center

Topkaya, Nursel

2015-01-01

The aim of the current research is to identify which factors, and in what direction these factors influence adults' decisions to seek psychological help for their personal problems. The research was designed as a phenomenology model; the data was gathered through the semi-structured interview technique, which is mostly used in qualitative research…

Factors influencing micronutrient bioavailability in biofortified crops.

PubMed

Bechoff, Aurélie; Dhuique-Mayer, Claudie

2017-02-01

Dietary and human factors have been found to be the major factors influencing the bioavailability of micronutrients, such as provitamin A carotenoid (pVAC), iron, and zinc, in biofortified crops. Dietary factors are related to food matrix structure and composition. Processing can improve pVAC bioavailability by disrupting the food matrix but can also result in carotenoid losses. By degrading antinutrients, such as phytate, processing can also enhance mineral bioavailability. In in vivo interventions, biofortified crops have been shown to be overall efficacious in reducing micronutrient deficiency, with bioconversion factors varying between 2.3:1 and 10.4:1 for trans-β-carotene and amounts of iron and zinc absorbed varying between 0.7 and 1.1 mg/day and 1.1 and 2.1 mg/day, respectively. Micronutrient bioavailability was dependent on the crop type and the presence of fat for pVACs and on antinutrients for minerals. In addition to dietary factors, human factors, such as inflammation and disease, can affect micronutrient status. Understanding the interactions between micronutrients is also essential, for example, the synergic effect of iron and pVACs or the competitive effect of iron and zinc. Future efficacy trials should consider human status and genetic polymorphisms linked to interindividual variations. © 2016 New York Academy of Sciences.