A research factory for polymer microdevices: muFac

NASA Astrophysics Data System (ADS)

Anthony, Brian W.; Hardt, David E.; Hale, Melinda; Zarrouati, Nadege

2010-02-01

As part of our research on the manufacturing science of micron scale polymer-based devices, an automated production cell has been developed to explore its use in a volume manufacturing environment. This "micro-factory" allows the testing of models and hardware that have resulted from research on material characterization and simulation, tooling and equipment design and control, and process control and metrology. More importantly it has allowed us to identify the problems that exist between and within unit-processes. This paper details our efforts to produce basic micro-fluidic products in high volume at acceptable production rates and quality levels. The device chosen for our first product is a simple binary micromixer with 40×50 micron channel cross section manufactured by embossing of PMMA. The processes in the cell include laser cutting and drilling, hot embossing, thermal bonding and high-speed inspection of the components. Our goal is to create a "lights-out" factory that can make long production runs (e.g. an 8 hour shift) at high rates (Takt time of less than 3 minutes) with consistent quality. This contrasts with device foundries where prototypes in limited quantities but with high variety are the goal. Accordingly, rate and yield are dominant factors in this work, along with the need for precise material handling strategies. Production data will be presented to include process run charts, sampled functional testing of the products and measures of the overall system throughput.

An Assessment of the Dimensionality and Factorial Structure of the Revised Paranormal Belief Scale

PubMed Central

Drinkwater, Kenneth; Denovan, Andrew; Dagnall, Neil; Parker, Andrew

2017-01-01

Since its introduction, the Revised Paranormal Belief Scale (RPBS) has developed into a principal measure of belief in the paranormal. Accordingly, the RPBS regularly appears within parapsychological research. Despite common usage, academic debates continue to focus on the factorial structure of the RPBS and its psychometric integrity. Using an aggregated heterogeneous sample (N = 3,764), the present study tested the fit of 10 factorial models encompassing variants of the most commonly proposed solutions (seven, five, two, and one-factor) plus new bifactor alternatives. A comparison of competing models revealed a seven-factor bifactor solution possessed superior data-model fit (CFI = 0.945, TLI = 0.933, IFI = 0.945, SRMR = 0.046, RMSEA = 0.058), containing strong factor loadings for a general factor and weaker, albeit acceptable, factor loadings for seven subfactors. This indicated that belief in the paranormal, as measured by the RPBS, is best characterized as a single overarching construct, comprising several related, but conceptually independent subfactors. Furthermore, women reported significantly higher paranormal belief scores than men, and tests of invariance indicated that mean differences in gender are unlikely to reflect measurement bias. Results indicate that despite concerns about the content and psychometric integrity of the RPBS the measure functions well at both a global and seven-factor level. Indeed, the original seven-factors contaminate alternative solutions. PMID:29018398

An Assessment of the Dimensionality and Factorial Structure of the Revised Paranormal Belief Scale.

PubMed

Drinkwater, Kenneth; Denovan, Andrew; Dagnall, Neil; Parker, Andrew

2017-01-01

Since its introduction, the Revised Paranormal Belief Scale (RPBS) has developed into a principal measure of belief in the paranormal. Accordingly, the RPBS regularly appears within parapsychological research. Despite common usage, academic debates continue to focus on the factorial structure of the RPBS and its psychometric integrity. Using an aggregated heterogeneous sample ( N = 3,764), the present study tested the fit of 10 factorial models encompassing variants of the most commonly proposed solutions (seven, five, two, and one-factor) plus new bifactor alternatives. A comparison of competing models revealed a seven-factor bifactor solution possessed superior data-model fit (CFI = 0.945, TLI = 0.933, IFI = 0.945, SRMR = 0.046, RMSEA = 0.058), containing strong factor loadings for a general factor and weaker, albeit acceptable, factor loadings for seven subfactors. This indicated that belief in the paranormal, as measured by the RPBS, is best characterized as a single overarching construct, comprising several related, but conceptually independent subfactors. Furthermore, women reported significantly higher paranormal belief scores than men, and tests of invariance indicated that mean differences in gender are unlikely to reflect measurement bias. Results indicate that despite concerns about the content and psychometric integrity of the RPBS the measure functions well at both a global and seven-factor level. Indeed, the original seven-factors contaminate alternative solutions.

Testing Factorial Invariance in Multilevel Data: A Monte Carlo Study

ERIC Educational Resources Information Center

Kim, Eun Sook; Kwok, Oi-man; Yoon, Myeongsun

2012-01-01

Testing factorial invariance has recently gained more attention in different social science disciplines. Nevertheless, when examining factorial invariance, it is generally assumed that the observations are independent of each other, which might not be always true. In this study, we examined the impact of testing factorial invariance in multilevel…

46 CFR 164.015-5 - Procedure for acceptance.

Code of Federal Regulations, 2011 CFR

2011-10-01

...: SPECIFICATIONS AND APPROVAL MATERIALS Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape § 164.015-5 Procedure for acceptance. (a) Unicellular plastic foam is not subject to formal approval, but will be... District will detail a marine inspector to the factory to observe the production facilities and...

Commissioning Instrument for the GTC

NASA Astrophysics Data System (ADS)

Cuevas, S.; Sánchez, B.; Bringas, V.; Espejo, C.; Flores, R.; Chapa, O.; Lara, G.; Chavolla, A.; Anguiano, G.; Arciniega, S.; Dorantes, A.; González, J. L.; Montoya, J. M.; Toral, R.; Hernández, H.; Nava, R.; Devaney, N.; Castro, J.; Cavaller-Marqués, L.

2005-12-01

During the GTC integration phase, the Commissioning Instrument (CI) will be a diagnostic tool for performance verification. The CI features four operation modes: imaging, pupil imaging, Curvature WFS, and high resolution Shack-Hartmann WFS. This instrument was built by the Instituto de Astronomía UNAM and the Centro de Ingeniería y Desarrollo Industrial (CIDESI) under GRANTECAN contract after a public bid. In this paper we made a general instrument overview and we show some of the performance final results obtained when the Factory Acceptance tests previous to its transport to La Palma.

[Factorial Structure of the Cardiff Anomalous Perceptions Scale (CAPS) in a Colombian Population Sample].

PubMed

Tamayo-Agudelo, William; Jaén-Moreno, María José; Luque-Luque, Rogelio

2015-01-01

The continuum hypothesis of psychosis assumes that hallucinations are not exclusive of psychotic disorders. A number of psychometric tests have been developed to assess psychosis using a dimensional model. To determine the factorial structure of the Cardiff Anomalous Perceptions Scale (CAPS) for the Colombian population, and to contrast the fit of two factor models previously reported in the literature by conducting a confirmatory factor analysis (CFA). This was a cross-sectional study in which 207 subjects from the general population were assessed using the Cardiff Anomalous Perceptions Scale. A two-factor structure with acceptable ordinal alpha coefficients (α=.88 and α=.87) was found. One factor gathered items related to multimodal perceptual alterations, and a second factor grouped items related with experiences linked to the temporal lobe. The analysis of the first factor indicated that it was dependent on cultural issues for the interpretation of sensations. The second factor appeared almost unchanged on diverse populations, suggesting its transcultural character. When comparing the models proposed by Bell et al. and Jaen-Moreno et al. using the data obtained from the sample, the confirmatory factor analysis conducted indicated inadequate goodness-of-fit indexes (χ(2)). However, some incremental goodness-of-fit indexes (normalized χ(2) [RMSEA]) were acceptable. The Jaén-Moreno et al. model showed the best fit to the data collected from the Colombian sample. The factorial structure of CAPS for the Colombian population appears to be sensitive to cultural issues, especially when describing anomalous sensorial experiences. Copyright © 2015 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Project W-314 specific test and evaluation plan for AZ tank farm upgrades

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hays, W.H.

1998-08-12

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made by the addition of the SN-631 transfer line from the AZ-O1A pit to the AZ-02A pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system`s performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation P1 an (TEP). Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities, etc), Factory Tests and Inspections (FTIs), installation tests andmore » inspections, Construction Tests and Inspections (CTIs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), and Operational Test Procedures (OTPs). The STEP will be utilized in conjunction with the TEP for verification and validation.« less

Factorial Structure of the New Ecological Paradigm Scale in Two French Samples

ERIC Educational Resources Information Center

Fleury-Bahi, Ghozlane; Marcouyeux, Aurore; Renard, Elise; Roussiau, Nicolas

2015-01-01

The principal objective of this research is to test the factorial structure of the New Ecological Paradigm scale on a population of men and women residing in France. The tested model is a second-order factorial model. This factorial structure is evaluated on two separate samples to test the stability of the solution (a first sample of 253…

Can preventive care activities in general practice be sustained when financial incentives and external audit plus feedback are removed? ACCEPt-able: a cluster randomised controlled trial protocol.

PubMed

Hocking, Jane S; Temple-Smith, Meredith; van Driel, Mieke; Law, Matthew; Guy, Rebecca; Bulfone, Liliana; Wood, Anna; Low, Nicola; Donovan, Basil; Fairley, Christopher K; Kaldor, John; Gunn, Jane

2016-09-13

Financial incentives and audit plus feedback on performance are two strategies commonly used by governments to motivate general practitioners (GP) to undertake specific healthcare activities. However, in recent years, governments have reduced or removed incentive payments without evidence of the potential impact on GP behaviour and patient outcomes. This trial (known as ACCEPt-able) aims to determine whether preventive care activities in general practice are sustained when financial incentives and/or external audit plus feedback on preventive care activities are removed. The activity investigated is annual chlamydia testing for 16- to 29-year-old adults, a key preventive health strategy within this age group. ACCEPt-able builds on a large cluster randomised controlled trial (RCT) that evaluated a 3-year chlamydia testing intervention in general practice. GPs were provided with a support package to facilitate annual chlamydia testing of all sexually active 16- to 29-year-old patients. This package included financial incentive payments to the GP for each chlamydia test conducted and external audit plus feedback on each GP's chlamydia testing rates. ACCEPt-able is a factorial cluster RCT in which general practices are randomised to one of four groups: (i) removal of audit plus feedback-continue to receive financial incentive payments for each chlamydia test; (ii) removal of financial incentive payments-continue to receive audit plus feedback; (iii) removal of financial incentive payments and audit plus feedback; and (iv) continue financial incentive payments and audit plus feedback. The primary outcome is chlamydia testing rate measured as the proportion of sexually active 16- to 29-year-olds who have a GP consultation within a 12-month period and at least one chlamydia test. This will be the first RCT to examine the impact of removal of financial incentive payments and audit plus feedback on the chlamydia testing behaviour of GPs. This trial is particularly timely and will increase our understanding about the impact of financial incentives and audit plus feedback on GP behaviour when governments are looking for opportunities to control healthcare budgets and maximise clinical outcomes for money spent. The results of this trial will have implications for supporting preventive health measures beyond the content area of chlamydia. The trial has been registered on the Australian and New Zealand Clinical Trials Registry ( ACTRN12614000595617 ).

Personality and substance use: psychometric evaluation and validation of the Substance Use Risk Profile Scale (SURPS) in English, Irish, French, and German adolescents.

PubMed

Jurk, Sarah; Kuitunen-Paul, Sören; Kroemer, Nils B; Artiges, Eric; Banaschewski, Tobias; Bokde, Arun L W; Büchel, Christian; Conrod, Patricia; Fauth-Bühler, Mira; Flor, Herta; Frouin, Vincent; Gallinat, Jürgen; Garavan, Hugh; Heinz, Andreas; Mann, Karl F; Nees, Frauke; Paus, Tomáš; Pausova, Zdenka; Poustka, Luise; Rietschel, Marcella; Schumann, Gunter; Struve, Maren; Smolka, Michael N

2015-11-01

The aim of the present longitudinal study was the psychometric evaluation of the Substance Use Risk Profile Scale (SURPS). We analyzed data from N = 2,022 adolescents aged 13 to 15 at baseline assessment and 2 years later (mean interval 2.11 years). Missing data at follow-up were imputed (N = 522). Psychometric properties of the SURPS were analyzed using confirmatory factor analysis. We examined structural as well as convergent validity with other personality measurements and drinking motives, and predictive validity for substance use at follow-up. The hypothesized 4-factorial structure (i.e., anxiety sensitivity, hopelessness, impulsivity [IMP], and sensation seeking [SS]) based on all 23 items resulted in acceptable fit to empirical data, acceptable internal consistencies, low to moderate test-retest reliability coefficients, as well as evidence for factorial and convergent validity. The proposed factor structure was stable for both males and females and, to lesser degree, across languages. However, only the SS and the IMP subscales of the SURPS predicted substance use outcomes at 16 years of age. The SURPS is unique in its specific assessment of traits related to substance use disorders as well as the resulting shortened administration time. Test-retest reliability was low to moderate and comparable to other personality scales. However, its relation to future substance use was limited to the SS and IMP subscales, which may be due to the relatively low-risk substance use pattern in the present sample. Copyright © 2015 by the Research Society on Alcoholism.

An Analysis of the U.S. Navy Enlisted Separation Questionnaire

DTIC Science & Technology

1981-06-01

on the amount of variance which will give a satis- factory and acceptable solution, only a small number (less than n) of factors will be needed to...three factors rather than nine initi al categories of data classification. C. FACTOR ANALISIS OF SUBSETS OF THE DATA During this phase of the analysis...Harm.an, H. H. & Holzinger, K. J., Factnr Anali• , Synthesis of Factorial Methods, University of Chicago PFess, 1941. 27. Fruchter, B., Introduction to

Factory overload testing of a large power transformer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas, D.H.; Lawrence, C.O.; Templeton, J.B.

1985-09-01

A factory overload test of up to 150% of the nameplate rating was run on a 224 MVA autotransformer. The results of this test were of great value and were used in identifying transformer overload limitations, in evaluating loading guide oil and winding equations, exponents and time constants, and in helping to perfect a factory overload test procedure.

Improving the Ability of Mathematic Representation Capabilities and Students Skills in Importing Square Forms to Square Using Variation Solutions

NASA Astrophysics Data System (ADS)

Nirawati, R.

2018-04-01

This research was conducted to see whether the variation of the solution is acceptable and easy to understand by students with different level of ability so that it can be seen the difference of students ability in facilitating the quadratic form in the upper, middle and lower groups. This research used experimental method with factorial design. Based on the result of final test analysis, there were differences of students ability in upper group, medium group, and lower group in putting squared form based on the use certain variation of solution.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, F. G.; Daniels, E. J.

This report summarizes an assessment conducted by Environmental Technologies Alternatives, Inc., under a subcontract to Argonne National Laboratory. The project was conducted in two phases. An assessment of alternative technologies for recycling of prompt non-tire rubber was conducted in the first phase, and an experimental program focusing on a new technology called the catalytic Regeneration Process offered the greatest opportunity for recovery of high-value recyclable rubber material. An experimental and large-scale test program was undertaken to further delineate the economic potential as an essential step leading to commercial deployment and to determine the course of continued development of the technologymore » by the private sector. The experimental program defined process-operating conditions for the technology and verified the degree of devulcanisation achievable for two rubber compounds: ethylene-propylene-nonconjugated-diene monomer (EPDM) and neoprene. To determine product acceptance, samples of devulcanized EPDM and neoprene were prepared and used in factory trials for the production of automotive moldings (EPDM) and fiber-filled belting (neoprene). The factory trials indicated that the physical properties of the products were acceptable in both cases. The appearance of molded and calendared surface finishes was acceptable, while that of extruded finishes was unsatisfactory. The fiber-filled neoprene belting application offers the greatest economic potential. Process costs were estimated at $0.34/lb for neoprene waste rubber relative to a value of $0.57/lb. The results of the experimental program led to the decision to continue development of this technology is being planned, subject to the availability of about $3 million in financing from private-sector investors. The ability to recycle non-tire rubber scrap could conserve as much as 90,000 Btu/lb, thus yielding an estimated energy savings potential of about 0.25 quad/yr.« less

Biopurification of industrial waste gas from rubber regeneration.

PubMed

Sun, Peishi; Yang, Xianwan; Huang, Ruohua; Bin, Huang; Zheng, Sunsheng; Wei, Zaishan; Xu, Xiaoyi; Lu, Jilai; Sun, Xing; Chen, Liuxin

2004-12-01

By using the biopurifying technology, the organic waste gas in low concentrations emitted from the rubber-regeneration process was purified in this research. The result of the 100-day continuous running test of the industrial test device indicated that the purification efficiency of toluene in the rubber-regeneration waste gas could be maintained at about 90% for a long period of time and the treated waste gas could meet the China National Emission Standard. The cost of waste gas biotreatment was about 0.12-0.14% of rubber-regeneration production value of the factory. The biopurifying technology of waste gas displayed its excellent technical advancement and economic rationale. The following industrialized device was run continuously and passed the examination and acceptance by the local EPA.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai

Similar to a super B-factory, a circular Higgs factory (CHF) will require strong focusing systems near the interaction points and a low-emittance lattice in the arcs to achieve a factory luminosity. At electron beam energy of 125 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at the 2% level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of a CHF. In this paper, an example will be provided to illustrate the beam dynamics in a CHF,more » emphasizing the chromatic optics. Basic optical modules and advanced analysis will be presented. Most importantly, we will show that 2% momentum aperture is achievable.« less

The Modified Reasons for Smoking Scale: factorial structure, validity and reliability in pregnant smokers.

PubMed

De Wilde, Katrien Sophie; Tency, Inge; Boudrez, Hedwig; Temmerman, Marleen; Maes, Lea; Clays, Els

2016-06-01

Smoking during pregnancy can cause several maternal and neonatal health risks, yet a considerable number of pregnant women continue to smoke. The objectives of this study were to test the factorial structure, validity and reliability of the Dutch version of the Modified Reasons for Smoking Scale (MRSS) in a sample of smoking pregnant women and to understand reasons for continued smoking during pregnancy. A longitudinal design was performed. Data of 97 pregnant smokers were collected during prenatal consultation. Structural equation modelling was performed to assess the construct validity of the MRSS: an exploratory factor analysis was conducted, followed by a confirmatory factor analysis.Test-retest reliability (<16 weeks and 32-34 weeks pregnancy) and internal consistency were assessed using the intraclass correlation coefficient and the Cronbach's alpha, respectively. To verify concurrent validity, Mann-Whitney U-tests were performed examining associations between the MRSS subscales and nicotine dependence, daily consumption, depressive symptoms and intention to quit. We found a factorial structure for the MRSS of 11 items within five subscales in order of importance: tension reduction, addiction, pleasure, habit and social function. Results for internal consistency and test-retest reliability were good to acceptable. There were significant associations of nicotine dependence with tension reduction and addiction and of daily consumption with addiction and habit. Validity and reliability of the MRSS were shown in a sample of pregnant smokers. Tension reduction was the most important reason for continued smoking, followed by pleasure and addiction. Although the score for nicotine dependence was low, addiction was an important reason for continued smoking during pregnancy; therefore, nicotine replacement therapy could be considered. Half of the respondents experienced depressive symptoms. Hence, it is important to identify those women who need more specialized care, which can include not only smoking cessation counselling but also treatment for depression. © 2016 John Wiley & Sons, Ltd.

Reliability and factorial validity of flexibility tests for team sports.

PubMed

Sporis, Goran; Vucetic, Vlatko; Jovanovic, Mario; Jukic, Igor; Omrcen, Darija

2011-04-01

The main goal of this method paper was to evaluate the reliability and factorial validity of flexibility tests used in soccer, and to do crossvalidation study on 2 other team sports using handball and basketball players. The second aim was to compare the validity of the different tests and evaluate the flexibility of soccer players; the third was to determine the positional differences between attackers, defenders, and midfielders in all flexibility tests. One hundred and fifty (n = 150) elite male junior soccer players, members of the First Croatian Junior League Teams, and 60 (n = 60) handball and 60 (n = 60) basketball players also members of the First Croatian Junior League Teams volunteered to participate in the study, tested for the purpose of crossvalidation. The SAR and V-SAR had the greatest AVR and ICC. The within-subjects variation ranged from between 0.3 and 3.8%. The lowest value of CV was found between the LSPL and LSPR. Low to moderate statistically significant correlation coefficients were found among all the measured flexibility tests. It was observed that the greatest correlations existed between the SAR and V-SAR (r = 0.65) and between the LLSR and LLSL (r = 0.56). Statistically significant correlations were also observed between the BLPL and BLPR (r = 0.62). The principal components factor analysis of 9 flexibility tests resulted in the extraction of 3 significant components. The results of this study have the following implications for the assessment of flexibility in soccer: (a) all flexibility tests used in this study have the acceptable between and within-subjects reliability and they can be used to estimate the flexibility of soccer players; (b) the LSPL and LSPR tests are the most reliable and valid flexibility tests for the estimation of flexibility of professional soccer players.

Promon's participation in the Brasilsat program: first & second generations

NASA Astrophysics Data System (ADS)

Depaiva, Ricardo N.

This paper presents an overview of the Brasilsat program, space and ground segments, developed by Hughes and Promon. Promon is a Brazilian engineering company that has been actively participating in the Brasilsat Satellite Telecommunications Program since its beginning. During the first generation, as subcontractor of the Spar/Hughes/SED consortium, Promon had a significant participation in the site installation of the Ground Segment, including the antennas. During the second generation, as partner of a consortium with Hughes, Promon participated in the upgrade of Brasilsat's Ground Segment systems: the TT&C (TCR1, TCR2, and SCC) and the COCC (Communications and Operations Control Center). This upgrade consisted of the design and development of hardware and software to support the second generation requirements, followed by integration and tests, factory acceptance tests, transport to site, site installation, site acceptance tests and warranty support. The upgraded systems are distributed over four sites with remote access to the main ground station. The solutions adopted provide a high level of automation, and easy operator interaction. The hardware and software technologies were selected to provide the flexibility to incorporate new technologies and services from the demanding satellite telecommunications market.

Randomized, single-blind, factorial design study of the interaction of food and time on intestinal activity in 99mTc-tetrofosmin stress myocardial perfusion scintigraphy.

PubMed

Lyngholm, Ann Marie; Pedersen, Begitte H; Petersen, Lars J

2008-09-01

Intestinal activity at the inferior myocardial wall represents an issue for assessment of myocardial perfusion imaging (MPI) with 99mTc-labelled tracers. The aim of this study was to investigate the effect of time and food on upper abdominal activity in 99mTc-tetrofosmin MPI. The study population consisted of 152 consecutive patients referred for routine MPI. All patients underwent 2-day stress-rest 99mTc-tetrofosmin single-photon emission computed tomography MPI. Before stress testing, patients were randomized in a factorial design to four different regimens. Group A: early scan (image acquisition initiated within 15 min after injection of the tracer) and no food; group B: early scan and food (two pieces of white bread with butter and a minimum of 450 ml of water); group C: late scan (image acquisition 30-60 min after injection of the tracer) and no food; and group D: late and scan with food. Patients underwent standard bicycle exercise or pharmacological stress test. The degree of upper abdominal activity was evaluated by trained observers blinded to the randomization code. The primary endpoint was the proportion of accepted scans in the intention-to-treat population in stress MPI. The results showed statistical significant impact on both time and food on upper abdominal activity. The primary endpoint showed that the acceptance rate improved from 55% in group A to 100% success rate in group D. An early scan reduced the acceptance rate by 30% versus a late scan [hazard ratio 0.70, 95% confidence interval 0.58-0.84; P<0.0001], whereas the addition of food improved the success rate versus no food by 27% (hazard ratio 1.27, 95% confidence interval 1.07-1.51; P=0.006). No significant interaction between food and time was observed. An analysis of accepted scans according to the actual scan time and food consumption confirmed the findings of the intention-to-treat analysis. In addition, similar findings were seen in 116 of 152 patients with a rest MPI (success rate of 53% in group A vs. 96% in group D). A combination of solid food and water administered after injection of the tracer and delayed image acquisition led to significant and clinically relevant decrease of interfering upper abdominal activity in 99mTc-tetrofosmin MPI.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogacz, Alex

We summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory and extendable to Higgs Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival for the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to an initially low RF frequency, e.g., 325 MHz, which is then increased to 650more » MHz as the transverse size shrinks with increasing energy. High-gradient normal conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. We consider an SRF-efficient design based on a multi-pass (4.5) ?dogbone? RLA, extendable to multi-pass FFAG-like arcs.« less

Muon Accelerator Program (MAP) | Homepage

Science.gov Websites

collider and neutrino factory Scientists around the world are developing the technologies necessary for a factory or a muon collider. Read more: Neutrino factory Muon collider Developing a muon source One of the developing and testing RF cavities and magnets for a muon beamline. The facility allows scientists to test

Car Assembly Line Efficiency Improvement by Lean Principle

NASA Astrophysics Data System (ADS)

Sawassalung, Suwalee; Chutima, Parames

2017-06-01

This research aimed to increase the efficiency of actual working time to compare to design standard time ratio (DSTR) as per analysing process of Lean System of the assembly line in a car manufacturer in Thailand. Currently, the case study factory and its group of factories, which have many branches all over the world, have competed with each other on quality, delivered time and production cost. The production cost which can reduce without affecting quality and acceptable by clients is the manpower cost. The index of competition is DSTR. The factory now has DSTR of 6.13 and DSTR of the assembly department is 4.24 which is very high comparing to other departments. The low DSTR indicates that the factory has good quality. The ways to solve the problem are to apply the following tools, i.e. Lean principle, Value Stream Mapping (VSM), Waste Analysis and ECRS. After implementing the above tools, the results showed that DSTR decreased from 4.24 to 4.06 or 4.25%.

Measurement invariance of the strength of motivation for medical school: a multi-group confirmatory factor analysis.

PubMed

An, M; Kusurkar, R A; Li, L; Xiao, Y; Zheng, C; Hu, J; Chen, M

2017-07-11

The Strength of Motivation for Medical School-Revised (SMMS-R) questionnaire measures students' motivation for studying medicine. It includes three subscales: 'willingness to sacrifice', 'readiness to start', and 'persistence'. Measurement invariance is a prerequisite for group comparisons. The objectives of this study were to verify the factorial structure of the SMMS-R questionnaire and to investigate it's measurement invariance. A total of 989 medical students were approached, 930 cases were kept for data analysis. Factorial structure of and measurement invariance of the SMMS-R were tested using single and multiple group confirmatory factor analyses with Mplus. Trational Cronbach's α along with McDonald's ω and glb were used to measure internal consistency for each subscale. Internal consistency for subscales and the full instrument were within the acceptable range. A 3-factor structure of the Chinese version of the SMMS-R was supported. Full configural, metric and partial scalar invariance were obtained. The SMMS-R showed measurement invariance across gender and two independent samples. So it can be used for group and cross-cultural comparisons.

Factorial Structure and Preliminary Validation of the Schema Mode Inventory for Eating Disorders (SMI-ED)

PubMed Central

Simpson, Susan G.; Pietrabissa, Giada; Rossi, Alessandro; Seychell, Tahnee; Manzoni, Gian Mauro; Munro, Calum; Nesci, Julian B.; Castelnuovo, Gianluca

2018-01-01

Objective: The aim of this study was to examine the psychometric properties and factorial structure of the Schema Mode Inventory for Eating Disorders (SMI-ED) in a disordered eating population. Method: 573 participants with disordered eating patterns as measured by the Eating Disorder Examination Questionnaire (EDE-Q) completed the 190-item adapted version of the Schema Mode Inventory (SMI). The new SMI-ED was developed by clinicians/researchers specializing in the treatment of eating disorders, through combining items from the original SMI with a set of additional questions specifically representative of the eating disorder population. Psychometric testing included Confirmatory Factor Analysis (CFA) and internal consistency (Cronbach's α). Multivariate Analyses of Covariance (MANCOVA) was also run to test statistical differences between the EDE-Q subscales on the SMI-ED modes, while controlling for possible confounding variables. Results: Factorial analysis confirmed an acceptable 16-related-factors solution for the SMI-ED, thus providing preliminary evidence for the adequate validity of the new measure based on internal structure. Concurrent validity was also established through moderate to high correlations on the modes most relevant to eating disorders with EDE-Q subscales. This study represents the first step in creating a psychometrically sound instrument for measuring schema modes in eating disorders, and provides greater insight into the relevant schema modes within this population. Conclusion: This research represents an important preliminary step toward understanding and labeling the schema mode model for this clinical group. Findings from the psychometric evaluation of SMI-ED suggest that this is a useful tool which may further assist in the measurement and conceptualization of schema modes in this population. PMID:29740379

Factorial Structure and Preliminary Validation of the Schema Mode Inventory for Eating Disorders (SMI-ED).

PubMed

Simpson, Susan G; Pietrabissa, Giada; Rossi, Alessandro; Seychell, Tahnee; Manzoni, Gian Mauro; Munro, Calum; Nesci, Julian B; Castelnuovo, Gianluca

2018-01-01

Objective: The aim of this study was to examine the psychometric properties and factorial structure of the Schema Mode Inventory for Eating Disorders (SMI-ED) in a disordered eating population. Method: 573 participants with disordered eating patterns as measured by the Eating Disorder Examination Questionnaire (EDE-Q) completed the 190-item adapted version of the Schema Mode Inventory (SMI). The new SMI-ED was developed by clinicians/researchers specializing in the treatment of eating disorders, through combining items from the original SMI with a set of additional questions specifically representative of the eating disorder population. Psychometric testing included Confirmatory Factor Analysis (CFA) and internal consistency (Cronbach's α). Multivariate Analyses of Covariance (MANCOVA) was also run to test statistical differences between the EDE-Q subscales on the SMI-ED modes, while controlling for possible confounding variables. Results: Factorial analysis confirmed an acceptable 16-related-factors solution for the SMI-ED, thus providing preliminary evidence for the adequate validity of the new measure based on internal structure. Concurrent validity was also established through moderate to high correlations on the modes most relevant to eating disorders with EDE-Q subscales. This study represents the first step in creating a psychometrically sound instrument for measuring schema modes in eating disorders, and provides greater insight into the relevant schema modes within this population. Conclusion: This research represents an important preliminary step toward understanding and labeling the schema mode model for this clinical group. Findings from the psychometric evaluation of SMI-ED suggest that this is a useful tool which may further assist in the measurement and conceptualization of schema modes in this population.

Oxygen from the lunar soil by molten silicate electrolysis

NASA Technical Reports Server (NTRS)

Colson, Russell O.; Haskin, Larry A.

1992-01-01

Accepting that oxygen, rather than gigantic gems or gold, is likely to make the Moon's Klondike, the extraction of oxygen from the lunar soil by molten silicate electrolysis has chosen to be investigated. Process theory and proposed lunar factory are addressed.

Construct validity of the G-CPAQ and its mediating role in pain interference and adjustment.

PubMed

Vasiliou, Vasilis S; Karekla, Maria; Michaelides, Michalis P; Kasinopoulos, Orestis

2018-02-01

The Chronic Pain Acceptance Questionnaire (CPAQ) is a measure of pain acceptance comprised of pain willingness (PW) and activity engagement (AE; McCracken et al., 2004). Concerns about the factorial structure of the CPAQ exist, as it is not yet clear whether PW and AE constitute 2 independent constructs or 1, pain acceptance. Concerns also exist about the internal and predictive validity of test score interpretations of this measure. This study also presents that the choice of predictor variables has contributed to theoretical confusion regarding the impact of pain acceptance on pain-related adjustment. The purpose of this study was: (a) to examine the psychometric properties of both the long (20 items) and short (8 items) versions of the Greek-Chronic Pain Acceptance Questionnaire (G-CPAQ); (b) to examine the utility of a 2-factor solution in predicting psychosocial adjustment to pain using confirmatory factor analysis; and (c) to explore the mediating effects of pain acceptance and cognitive defusion, comprising the "open" response style to pain, between pain interference and pain related outcomes. One hundred and sixty chronic pain patients completed a questionnaire packet including pain indexes, pain acceptance, cognitive fusion, avoidance, and emotional distress. Confirmatory factor analyses supported the 2-factor solution, though a general good model fit was achieved only for the short G-CPAQ version. Structural equation modeling showed that PW and AE coupled with cognitive defusion partially mediated the influence of pain interference on pain severity, emotional distress, and avoidance of pain. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Design Learning of Teaching Factory in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Putra, R. C.; Kusumah, I. H.; Komaro, M.; Rahayu, Y.; Asfiyanur, E. P.

2018-02-01

The industrial world that is the target of the process and learning outcomes of vocational high school (SMK) has its own character and nuance. Therefore, vocational education institutions in the learning process should be able to make the appropriate learning approach and in accordance with the industrial world. One approach to learning that is based on production and learning in the world of work is by industry-based learning or known as Teaching Factory, where in this model apply learning that involves direct students in goods or service activities are expected to have the quality so it is worth selling and accepted by consumers. The method used is descriptive approach. The purpose of this research is to get the design of the teaching factory based on the competency requirements of the graduates of the spouse industry, especially in the engineering department. The results of this study is expected to be one of the choice of model factory teaching in the field of machinery engineering in accordance with the products and competencies of the graduates that the industry needs.

Evaluation philosophy for shuttle launched payloads

NASA Technical Reports Server (NTRS)

Heuser, R. E.

1975-01-01

Potential benefits of factory-to-pad testing constitute major cost savings and increase test effectiveness. Overall flight performance will be improved. The factory-to-pad approach is compatible with space shuttle processing and the large space telescope program.

The 9-item Bergen Burnout Inventory: factorial validity across organizations and measurements of longitudinal data.

PubMed

Feldt, Taru; Rantanen, Johanna; Hyvönen, Katriina; Mäkikangas, Anne; Huhtala, Mari; Pihlajasaari, Pia; Kinnunen, Ulla

2014-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times.

Testing for Factorial Invariance in the Context of Construct Validation

ERIC Educational Resources Information Center

Dimitrov, Dimiter M.

2010-01-01

This article describes the logic and procedures behind testing for factorial invariance across groups in the context of construct validation. The procedures include testing for configural, measurement, and structural invariance in the framework of multiple-group confirmatory factor analysis (CFA). The "forward" (sequential constraint imposition)…

Microbial Consortia Engineering for Cellular Factories: in vitro to in silico systems

PubMed Central

Bernstein, Hans C; Carlson, Ross P

2012-01-01

This mini-review discusses the current state of experimental and computational microbial consortia engineering with a focus on cellular factories. A discussion of promising ecological theories central to community resource usage is presented to facilitate interpretation of consortial designs. Recent case studies exemplifying different resource usage motifs and consortial assembly templates are presented. The review also highlights in silico approaches to design and to analyze consortia with an emphasis on stoichiometric modeling methods. The discipline of microbial consortia engineering possesses a widely accepted potential to generate highly novel and effective bio-catalysts for applications from biofuels to specialty chemicals to enhanced mineral recovery. PMID:24688677

Psychometric properties of the Spanish version of the Controlling Coach Behaviors Scale in the sport context.

PubMed

Castillo, Isabel; Tomás, Inés; Ntoumanis, Nikos; Bartholomew, Kimberley; Duda, Joan L; Balaguer, Isabel

2014-01-01

The purpose of this research was to translate into Spanish and examine the psychometric properties of the Spanish version of the Controlling Coach Behaviors Scale (CCBS) in male soccer players. The CCBS is a questionnaire designed to assess athletes' perceptions of sports coaches' controlling interpersonal style from the perspective of the self-determination theory. Study 1 tested the factorial structure of the translated scale using confirmatory factor analysis (CFA) and provided evidence of discriminant validity. Studies 2 and 3 examined the invariance across time and across competitive level via multi-sample CFA. Reliability analyses were also conducted. The CFA results revealed that a four-factor model was acceptable, indicating that a controlling interpersonal style is a multidimensional construct represented by four separate and related controlling coaching strategies. Further, results supported the invariance of the CCBS factor structure across time and competitive level and provided support for the internal consistency of the scale. Overall, the CCBS demonstrated adequate internal consistency, as well as good factorial validity. The Spanish version of the CCBS represents a valid and reliable adaptation of the instrument, which can be confidently used to measure soccer players' perceptions of their coaches' controlling interpersonal style.

Occupational carprofen photoallergic contact dermatitis.

PubMed

Kerr, A C; Muller, F; Ferguson, J; Dawe, R S

2008-12-01

The nonsteroidal anti-inflammatory drug carprofen was used in humans in the 1980s, before its withdrawal due to adverse effects. It re-emerged for veterinary uses, for which it is still widely prescribed, in the 1990s. There has been one previous report published of photoallergic contact dermatitis (PACD) in a pharmaceutical factory worker exposed to carprofen. Investigation of carprofen as a cause of PACD in pharmaceutical factory workers presenting with facial dermatitis. Photopatch testing to carprofen dilutions in two pharmaceutical factory workers and three healthy volunteer controls using the European consensus methodology. This was followed by testing of eight further employees, referred by occupational health services, in the same factory. The index patient suspected a problem with carprofen and was found to have PACD to carprofen. The second patient presented with a widespread, although especially photoexposed site, dermatitis and was initially labelled as having an 'unclassified dermatitis'. Only subsequently was her exposure (indirect; she did not work in the packaging section of the factory like the first patient) to carprofen recognized and testing confirmed both contact allergy and PACD to carprofen. One of three healthy volunteer controls had an active photoallergy sensitization event to carprofen starting 10 days after photopatch testing. Three of eight factory employees subsequently referred because of skin problems had carprofen PACD. Carprofen is a potent photoallergen. These cases emphasize the importance of photopatch testing, and considering agents not included in standard series, when investigating patients presenting with a photoexposed site dermatitis.

POWER AND SAMPLE SIZE CALCULATIONS FOR LINEAR HYPOTHESES ASSOCIATED WITH MIXTURES OF MANY COMPONENTS USING FIXED-RATIO RAY DESIGNS

EPA Science Inventory

Response surface methodology, often supported by factorial designs, is the classical experimental approach that is widely accepted for detecting and characterizing interactions among chemicals in a mixture. In an effort to reduce the experimental effort as the number of compound...

77 FR 44593 - Burlington Coat Factory Warehouse Corporation, Provisional Acceptance of a Settlement Agreement...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-30

..., Bethesda, Maryland 20814- 4408; telephone (301) 504-7612. SUPPLEMENTARY INFORMATION: The text of the... with drawstrings at the neck, including, but not limited to, the following: Liberty Apparel Company... Outerwear (``Guidelines'') to help prevent children from strangling or entangling on neck and waist...

Indexing Creativity Fostering Teacher Behaviour: Replication and Modification

ERIC Educational Resources Information Center

Dikici, Ayhan; Soh, Kaycheng

2015-01-01

Many measurement tools on creativity are available in the literature. One of these scales is Creativity Fostering Teacher Behaviour Index (CFTIndex) developed for Singaporean teacher originally. It was then translated into Turkish and trialled on teachers in Nigde province with acceptable reliability and factorial validity. The main purpose of…

A rapid biochemical test to assess postharvest deterioration of sugarcane and milled juice

USDA-ARS?s Scientific Manuscript database

The delivery of consignments of deteriorated sugarcane to factories can detrimentally affect multiple process units, and even lead to a factory shut-down. An enzymatic factory method was used to measure mannitol, a major degradation product of sugarcane Leuconostoc deterioration in the U.S., in pre...

Tracing the contamination origin of coliform bacteria in two small food-processing factories.

PubMed

Tominaga, Tatsuya; Sekine, Masahiro; Oyaizu, Hiroshi

2008-09-01

The objective of this study was to trace contamination sources of coliform bacteria by comparing the types of coliforms between food samples and the processing environments in two small food-processing factories (factories A and B). Fermentation tests of five sugars enabled the successful classification of 16 representative type strains into eight distinct groups. The grouping procedure was then applied to comparison of the coliform flora between food products and various locations in their processing environments. The consistency between each food and the tested locations was evaluated using the Jaccard index. The air conditioner and refrigeration room floor in factory A showed an index of 1.00, while the shaping machine in factory B showed an index of 0.98, indicating that these locations could be contamination sources. The validity of our results was confirmed by randomly amplified polymorphic DNA, which showed 100% matched profiles between the air conditioner and the food in factory A, and highly matched profiles between the machine and the food in factory B. This method for comparing the coliform flora between food and environments has the potential to be a reliable tracing tool for various food industries.

Pairing QuantiFERON Gold In-Tube with Opt-Out HIV Testing in a Tuberculosis Contact Investigation in the Southeastern United States

PubMed Central

Goswami, Neela D.; Bissette, Deborah J.; Turner, Debra S.; Baker, Ann V.; Gadkowski, L. Beth; Naggie, Susanna; Erlandson, Kirby; Chen, Luke; Lalani, Tahaniyat; Cox, Gary M.; Stout, Jason E.

2010-01-01

Abstract Knowing one's HIV status is particularly important in the setting of recent tuberculosis (TB) exposure. Blood tests for assessment of tuberculosis infection, such as the QuantiFERON Gold in-tube test (QFT; Cellestis Limited, Carnegie, Victoria, Australia), offer the possibility of simultaneous screening for TB and HIV with a single blood draw. We performed a cross-sectional analysis of all contacts to a highly infectious TB case in a large meatpacking factory. Twenty-two percent were foreign-born and 73% were black. Contacts were tested with both tuberculin skin testing (TST) and QFT. HIV testing was offered on an opt-out basis. Persons with TST ≥10 mm, positive QFT, and/or positive HIV test were offered latent TB treatment. Three hundred twenty-six contacts were screened: TST results were available for 266 people and an additional 24 reported a prior positive TST for a total of 290 persons with any TST result (89.0%). Adequate QFT specimens were obtained for 312 (95.7%) of persons. Thirty-two persons had QFT results but did not return for TST reading. Twenty-two percent met the criteria for latent TB infection. Eighty–eight percent accepted HIV testing. Two (0.7%) were HIV seropositive; both individuals were already aware of their HIV status, but one had stopped care a year previously. None of the HIV-seropositive persons had latent TB, but all were offered latent TB treatment per standard guidelines. This demonstrates that opt-out HIV testing combined with QFT in a large TB contact investigation was feasible and useful. HIV testing was also widely accepted. Pairing QFT with opt-out HIV testing should be strongly considered when possible. PMID:20731612

The 9-item Bergen Burnout Inventory: Factorial Validity Across Organizations and Measurements of Longitudinal Data

PubMed Central

Feldt, Taru; RANTANEN, Johanna; HYVÖNEN, Katriina; MÄKIKANGAS, Anne; HUHTALA, Mari; PIHLAJASAARI, Pia; KINNUNEN, Ulla

2013-01-01

The present study tested the factorial validity of the 9-item Bergen Burnout Inventory (BBI-9)1). The BBI-9 is comprised of three core dimensions: (1) exhaustion at work; (2) cynicism toward the meaning of work; and (3) sense of inadequacy at work. The study further investigated whether the three-factor structure of the BBI-9 remains the same across different organizations (group invariance) and measurement time points (time invariance). The factorial group invariance was tested using a cross-sectional design with data pertaining to managers (n=742), and employees working in a bank (n=162), an engineering office (n=236), a public sector organization divided into three service areas: administration (n=102), education and culture (n=581), and social affairs and health (n=1,505). Factorial time invariance was tested using longitudinal data pertaining to managers, with three measurements over a four-year follow-up period. The confirmatory factor analysis revealed that the three-factor structure of the BBI-9 was invariant across cross-sectional samples. The factorial invariance was also supported across measurement times. To conclude, the factorial structure of the BBI-9 was found to remain the same regardless of the sample properties and measurement times. PMID:24366535

Optimization and Validation of a Plaque Reduction Neutralization Test for the Detection of Neutralizing Antibodies to Four Serotypes of Dengue Virus Used in Support of Dengue Vaccine Development

PubMed Central

Timiryasova, Tatyana M.; Bonaparte, Matthew I.; Luo, Ping; Zedar, Rebecca; Hu, Branda T.; Hildreth, Stephen W.

2013-01-01

A dengue plaque reduction neutralization test (PRNT) to measure dengue serotype–specific neutralizing antibodies for all four virus serotypes was developed, optimized, and validated in accordance with guidelines for validation of bioanalytical test methods using human serum samples from dengue-infected persons and persons receiving a dengue vaccine candidate. Production and characterization of dengue challenge viruses used in the assay was standardized. Once virus stocks were characterized, the dengue PRNT50 for each of the four serotypes was optimized according to a factorial design of experiments approach for critical test parameters, including days of cell seeding before testing, percentage of overlay carboxymethylcellulose medium, and days of incubation post-infection to generate a robust assay. The PRNT50 was then validated and demonstrated to be suitable to detect and measure dengue serotype-specific neutralizing antibodies in human serum samples with acceptable intra-assay and inter-assay precision, accuracy/dilutability, specificity, and with a lower limit of quantitation of 10. PMID:23458954

Study protocol for a cluster randomised controlled factorial design trial to assess the effectiveness and feasibility of reactive focal mass drug administration and vector control to reduce malaria transmission in the low endemic setting of Namibia

PubMed Central

Medzihradsky, Oliver F; Kleinschmidt, Immo; Mumbengegwi, Davis; Roberts, Kathryn W; McCreesh, Patrick; Dufour, Mi-Suk Kang; Uusiku, Petrina; Katokele, Stark; Bennett, Adam; Smith, Jennifer; Sturrock, Hugh; Prach, Lisa M; Ntuku, Henry; Tambo, Munyaradzi; Didier, Bradley; Greenhouse, Bryan; Gani, Zaahira; Aerts, Ann; Gosling, Roly; Hsiang, Michelle S

2018-01-01

Introduction To interrupt malaria transmission, strategies must target the parasite reservoir in both humans and mosquitos. Testing of community members linked to an index case, termed reactive case detection (RACD), is commonly implemented in low transmission areas, though its impact may be limited by the sensitivity of current diagnostics. Indoor residual spraying (IRS) before malaria season is a cornerstone of vector control efforts. Despite their implementation in Namibia, a country approaching elimination, these methods have been met with recent plateaus in transmission reduction. This study evaluates the effectiveness and feasibility of two new targeted strategies, reactive focal mass drug administration (rfMDA) and reactive focal vector control (RAVC) in Namibia. Methods and analysis This is an open-label cluster randomised controlled trial with 2×2 factorial design. The interventions include: rfMDA (presumptive treatment with artemether-lumefantrine (AL)) versus RACD (rapid diagnostic testing and treatment using AL) and RAVC (IRS with Acellic 300CS) versus no RAVC. Factorial design also enables comparison of the combined rfMDA+RAVC intervention to RACD. Participants living in 56 enumeration areas will be randomised to one of four arms: rfMDA, rfMDA+RAVC, RACD or RACD+RAVC. These interventions, triggered by index cases detected at health facilities, will be targeted to individuals residing within 500 m of an index. The primary outcome is cumulative incidence of locally acquired malaria detected at health facilities over 1 year. Secondary outcomes include seroprevalence, infection prevalence, intervention coverage, safety, acceptability, adherence, cost and cost-effectiveness. Ethics and dissemination Findings will be reported on clinicaltrials.gov, in peer-reviewed publications and through stakeholder meetings with MoHSS and community leaders in Namibia. Trial registration number NCT02610400; Pre-results. PMID:29374672

Study protocol for a cluster randomised controlled factorial design trial to assess the effectiveness and feasibility of reactive focal mass drug administration and vector control to reduce malaria transmission in the low endemic setting of Namibia.

PubMed

Medzihradsky, Oliver F; Kleinschmidt, Immo; Mumbengegwi, Davis; Roberts, Kathryn W; McCreesh, Patrick; Dufour, Mi-Suk Kang; Uusiku, Petrina; Katokele, Stark; Bennett, Adam; Smith, Jennifer; Sturrock, Hugh; Prach, Lisa M; Ntuku, Henry; Tambo, Munyaradzi; Didier, Bradley; Greenhouse, Bryan; Gani, Zaahira; Aerts, Ann; Gosling, Roly; Hsiang, Michelle S

2018-01-27

To interrupt malaria transmission, strategies must target the parasite reservoir in both humans and mosquitos. Testing of community members linked to an index case, termed reactive case detection (RACD), is commonly implemented in low transmission areas, though its impact may be limited by the sensitivity of current diagnostics. Indoor residual spraying (IRS) before malaria season is a cornerstone of vector control efforts. Despite their implementation in Namibia, a country approaching elimination, these methods have been met with recent plateaus in transmission reduction. This study evaluates the effectiveness and feasibility of two new targeted strategies, reactive focal mass drug administration (rfMDA) and reactive focal vector control (RAVC) in Namibia. This is an open-label cluster randomised controlled trial with 2×2 factorial design. The interventions include: rfMDA (presumptive treatment with artemether-lumefantrine (AL)) versus RACD (rapid diagnostic testing and treatment using AL) and RAVC (IRS with Acellic 300CS) versus no RAVC. Factorial design also enables comparison of the combined rfMDA+RAVC intervention to RACD. Participants living in 56 enumeration areas will be randomised to one of four arms: rfMDA, rfMDA+RAVC, RACD or RACD+RAVC. These interventions, triggered by index cases detected at health facilities, will be targeted to individuals residing within 500 m of an index. The primary outcome is cumulative incidence of locally acquired malaria detected at health facilities over 1 year. Secondary outcomes include seroprevalence, infection prevalence, intervention coverage, safety, acceptability, adherence, cost and cost-effectiveness. Findings will be reported on clinicaltrials.gov, in peer-reviewed publications and through stakeholder meetings with MoHSS and community leaders in Namibia. NCT02610400; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

[Distribution Characteristics of Heavy Metals in Environmental Samples Around Electroplating Factories and the Health Risk Assessment].

PubMed

Guo, Peng-ran; Lei, Yong-qian; Zhou, Qiao-li; Wang, Chang; Pan, Jia-chuan

2015-09-01

This study aimed to investigate the pollution degree and human health risk of heavy metals in soil and air samples around electroplating factories. Soil, air and waste gas samples were collected to measure 8 heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb and Zn) in two electroplating factories, located in Baiyun district of Guangzhou city. Geoaccumulation index and USEPA Risk Assessment Guidance for Superfund (RAGS) were respectively carried out. Results showed that concentrations of Hg and Pb in waste gas and Cr in air samples were higher than limits of the corresponding quality standards, and concentrations of Cd, Hg and Zn in soil samples reached the moderate pollution level. The HQ and HI of exposure by heavy metals in air and soil samples were both lower than 1, indicating that there was no non-carcinogen risk. CRAs and CRCr in soil samples were beyond the maximum acceptable level of carcinogen risk (10(-4)), and the contribution rate of CRCr to TCR was over 81%. CRCr, CRNi and TCR in air samples were in range of 10(-6) - 10(-4), indicating there was possibly carcinogen risk but was acceptable risk. CR values for children were higher than adults in soils, but were higher for adults in air samples. Correlation analysis revealed that concentrations of heavy metals in soils were significantly correlated with these in waste gas samples, and PCA data showed pollution sources of Cd, Hg and Zn in soils were different from other metals.

A Cross-Cultural Comparison of the Dimensions of Child and Adolescent Life Satisfaction Reports

ERIC Educational Resources Information Center

Park, Nansook; Huebner, E. Scott; Laughlin, James E.; Valois, Robert F.; Gilman, Rich

2004-01-01

The factorial invariance of the Multidimensional Students' Life Satisfaction Scale (MSLSS: Huebner, 1994) across two divergent cultures (collectivistic vs.individualistic) was investigated with 835 Korean and 822 US students in elementary, middle, and high schools. Psychometric properties of the Korean version of the MSLSS were acceptable. A…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogacz, Slawomir Alex

Here, we summarize current state of concept for muon acceleration aimed at future Neutrino Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance through exploring interplay between complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival of the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to initially low RF frequency, e.g. 325 MHz, and then increased to 650 MHz, as the transverse size shrinks with increasing energy. High-gradient normalmore » conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. Here, we considered two cost effective schemes for accelerating muon beams for a stagable Neutrino Factory: Exploration of the so-called 'dual-use' linac concept, where the same linac structure is used for acceleration of both H- and muons and alternatively, the SRF efficient design based on multi-pass (4.5) 'dogbone' RLA, extendable to multi-pass FFAG-like arcs.« less

Examining maternal age, breastfeeding self-efficacy and health locus of control in psychological wellbeing of mothers.

PubMed

Lawal, Abiodun Musbau; Idemudia, Erhabor Sunday

2017-12-01

We investigated the direct and interaction influence of maternal age, breastfeeding self-efficacy (BSE), health locus of control (HLOC) on six dimensions of psychological wellbeing of breastfeeding mothers in Lagos, Nigeria. Data were collected from a convenience sample of 291 mothers attending health facilities in two suburb local government areas. The survey included socio-demographics (maternal age, marital status, ethnicity, education level and position of the baby currently breastfeeding), breastfeeding self-efficacy, health locus of control and psychological wellbeing scales. Independent variables were tested against sense of autonomy, positive relations with others, purpose in life, self-acceptance, environmental mastery and personal growth using factorial Multivariate Analysis of Variance. Results showed direct influence of BSE, HLOC and maternal age on various dimensions of psychological wellbeing. Interaction influences indicate BSE and HLOC on environmental mastery; BSE and maternal age on self-acceptance and HLOC and maternal age on sense of autonomy, positive relationship with others and self-acceptance respectively. In conclusion, maternal age, breastfeeding self-efficacy and health locus of control are vital for mothers to enjoy plenty dimensions of psychological wellbeing. Breastfeeding mothers need to be confident in their abilities to breastfeed and have control over their health-related behaviour in order to enjoy sufficient dimensions of psychological wellbeing.

A food contaminant detection system based on high-Tc SQUIDs

NASA Astrophysics Data System (ADS)

Tanaka, Saburo; Fujita, H.; Hatsukade, Y.; Nagaishi, T.; Nishi, K.; Ota, H.; Otani, T.; Suzuki, S.

2006-05-01

We have designed and constructed a computer controlled food contaminant detection system for practical use, based on high-Tc SQUID detectors. The system, which features waterproof stainless steel construction, is acceptable under the HACCP (Hazard Analysis and Critical Control Point) programme guidelines. The outer dimensions of the system are 1500 mm length × 477 mm width × 1445 mm height, and it can accept objects up to 200 mm wide × 80 mm high. An automatic liquid nitrogen filling system was installed in the standard model. This system employed a double-layered permeable metallic shield with a thickness of 1 mm as a magnetically shielded box. The distribution of the magnetic field in the box was simulated by FEM; the gap between each shield layer was optimized before fabrication. A shielding factor of 732 in the Z-component was achieved. This value is high enough to safely operate the system in a non-laboratory environment, i.e., a factory. During testing, we successfully detected a steel contaminant as small as 0.3 mm in diameter at a distance of 75 mm.

Factorial Validity and Invariance Testing of the Exercise Dependence Scale-Revised in Swedish and Portuguese Exercisers

ERIC Educational Resources Information Center

Lindwall, Magnus; Palmeira, Antonio

2009-01-01

The present study investigated the factorial validity and factorial invariance of the 21-item Exercise Dependence Scale-Revised using 162 Swedish and 269 Portuguese exercisers. In addition, the prevalence of exercise dependence symptoms and links to exercise behavior, gender, and age in the two samples was also studied. Confirmatory factor…

Broiler genetic strain and sex effects on meat characteristics.

PubMed

López, K P; Schilling, M W; Corzo, A

2011-05-01

A randomized complete block design within a factorial arrangement of treatments was used to evaluate the effect of strain and sex on carcass characteristics, meat quality, and sensory acceptability. Two broiler strains were reared: a commercially available strain (strain A) and a strain currently in the test phase (strain B) that has been genetically selected to maximize breast yield. Broilers were harvested in a pilot scale processing plant using commercial prototype equipment at 42 d of age. Carcasses were deboned at 4 h postmortem. The left half of each breast was evaluated for pH, color, cooking loss, shear force, and proximate analysis. The right side of each breast was used for consumer acceptability testing. Thigh meat was evaluated for proximate composition. No interactions were observed throughout the study. Male broilers had a higher (P < 0.05) live BW, carcass weight, and breast weight and lower (P < 0.05) dressing percentage and breast meat yield when compared with females. Broilers from strain B presented a higher (P < 0.05) breast yield and dressing percentage than those broilers corresponding to the commercially available broiler strain. At 24 h postmortem, female broilers presented a lower ultimate pH and higher Commission internationale de l'éclairage yellowness values (ventral side of the pectoralis major) when compared with male broilers. On average, no differences existed (P > 0.05) among treatments with respect to pH decline, cooking loss, shear values, and proximate composition. In addition, no differences (P > 0.05) existed among breast meat from the different strains with respect to consumer acceptability of appearance, texture, flavor, and overall acceptability, but breast meat from strain B was slightly preferred (P < 0.05) over that of strain A with respect to aroma. However, breast meat from both strains received scores in the range of "like slightly to like moderately." Overall data suggest that all treatments yielded high quality breast and thigh meat and strain cross did not present variability in terms of consumer acceptability.

Leaching characteristics of copper flotation waste before and after vitrification.

PubMed

Coruh, Semra; Ergun, Osman Nuri

2006-12-01

Copper flotation waste from copper production using a pyrometallurgical process contains toxic metals such as Cu, Zn, Co and Pb. Because of the presence of trace amounts of these highly toxic metals, copper flotation waste contributes to environmental pollution. In this study, the leaching characteristics of copper flotation waste from the Black Sea Copper Works in Samsun, Turkey have been investigated before and after vitrification. Samples obtained from the factory were subjected to toxicity tests such as the extraction procedure toxicity test (EP Tox), the toxicity characteristic leaching procedure (TCLP) and the "method A" extraction procedure of the American Society of Testing and Materials. The leaching tests showed that the content of some elements in the waste before vitrification exceed the regulatory limits and cannot be disposed of in the present form. Therefore, a stabilization or inertization treatment is necessary prior to disposal. Vitrification was found to stabilize heavy metals in the copper flotation waste successfully and leaching of these metals was largely reduced. Therefore, vitrification can be an acceptable method for disposal of copper flotation waste.

Lithium D-cell study

NASA Technical Reports Server (NTRS)

Size, P.; Takeuchi, Esther S.

1993-01-01

The purpose of this contract is to evaluate parametrically the effects of various factors including the electrolyte type, electrolyte concentration, depolarizer type, and cell configuration on lithium cell electrical performance and safety. This effort shall allow for the selection and optimization of cell design for future NASA applications while maintaining close ties with WGL's continuous improvements in manufacturing processes and lithium cell design. Taguchi experimental design techniques are employed in this task, and allow for a maximum amount of information to be obtained while requiring significantly less cells than if a full factorial design were employed. Acceptance testing for this task is modeled after the NASA Document EP5-83-025, Revision C, for cell weights, OCV's and load voltages. The performance attributes that are studied in this effort are fresh capacity and start-up characteristics evaluated at two rates and two temperatures, shelf-life characteristics including start-up and capacity retention, and iterative microcalorimetry measurements. Abuse testing includes forced over discharge at two rates with and without diode protection, temperature tolerance testing, and shorting tests at three rates with the measurement of heat generated during shorting conditions.

Factor structure and reliability of the childhood trauma questionnaire and prevalence estimates of trauma for male and female street youth.

PubMed

Forde, David R; Baron, Stephen W; Scher, Christine D; Stein, Murray B

2012-01-01

This study examines the psychometric properties of the Childhood Trauma Questionnaire short form (CTQ-SF) with street youth who have run away or been expelled from their homes (N = 397). Internal reliability coefficients for the five clinical scales ranged from .65 to .95. Confirmatory Factor Analysis (CFA) was used to test the five-factor structure of the scales yielding acceptable fit for the total sample. Additional multigroup analyses were performed to consider items by gender. Results provided only evidence of weak factorial invariance. Constrained models showed invariance in configuration, factor loadings, and factor covariances but failed for equality of intercepts. Mean trauma scores for street youth tended to fall in the moderate to severe range on all abuse/neglect clinical scales. Females reported higher levels of abuse and neglect. Prevalence of child maltreatment of individual forms was very high with 98% of street youth reporting one or more forms; 27.4% of males and 48.9% of females reported all five forms. Results of this study support the viability of the CTQ-SF for screening maltreatment in a highly vulnerable street population. Caution is recommended when comparing prevalence estimates for male and female street youth given the failure of the strong factorial multigroup model.

PedsQLTM 4.0 Generic Core Scales for adolescents in the Yoruba language: translation and general psychometric properties.

PubMed

Atilola, Olayinka; Stevanović, Dejan

2014-04-01

Quality of life (QOL) is a universally accepted concept for measuring the impact of different aspects of life on general well-being. Adaptation of existing QOL instruments to local cultures has been identified as a better strategy than development of new ones. To translate and adapt the Paediatric Quality of Life Inventory™ Version 4.0 Generic Core Scales (PedsQL™) to the Yoruba language and culture and to test the psychometric properties of the adapted instrument among adolescents. Psychometric properties including internal consistency reliability, construct and factorial validity of the Yoruba version of PedsQL™ were evaluated using standard procedures. The self report and proxy scales of the Yoruba PedsQL™ were developed with good cultural relevance and semantic/conceptual equivalence. Results from 527 adolescents revealed a Cronbach's coefficient which exceeded 0.7 for internal consistency reliability for all scores. The healthy subjects reported higher PedsQL™ scores than those with mental health and physical problems, which confirmed construct validity. Confirmatory factor analysis revealed a good model fit for the Psychosocial Health score, but not for the other measures. The Yoruba PedsQL™ is culturally appropriate and with good internal consistency, reliability and construct validity. More work is needed regarding its factorial validity.

Dermatitis in a rubber tyre factory.

PubMed

Zina, A M; Bedello, P G; Cane, D; Bundino, S; Benedetto, A

1987-07-01

An outbreak of occupational dermatitis in a rubber tyre factory is reported. An unusual clinical picture was recognized. Patch tests revealed a high sensitization rate to the MBT derivative used: 2-(2'-4'dinitrophenylthio)benzothiazole. Since tests with MBT mix and dinitrophenol were negative; sensitization to a contaminant was suspected. DNCB was traced as the substance responsible.

Psychometric evaluation of the Persian version of the Templer's Death Anxiety Scale in cancer patients.

PubMed

Soleimani, Mohammad Ali; Yaghoobzadeh, Ameneh; Bahrami, Nasim; Sharif, Saeed Pahlevan; Sharif Nia, Hamid

2016-10-01

In this study, 398 Iranian cancer patients completed the 15-item Templer's Death Anxiety Scale (TDAS). Tests of internal consistency, principal components analysis, and confirmatory factor analysis were conducted to assess the internal consistency and factorial validity of the Persian TDAS. The construct reliability statistic and average variance extracted were also calculated to measure construct reliability, convergent validity, and discriminant validity. Principal components analysis indicated a 3-component solution, which was generally supported in the confirmatory analysis. However, acceptable cutoffs for construct reliability, convergent validity, and discriminant validity were not fulfilled for the three subscales that were derived from the principal component analysis. This study demonstrated both the advantages and potential limitations of using the TDAS with Persian-speaking cancer patients.

76 FR 68167 - Spin Master, Inc. and Spin Master, Ltd., Provisional Acceptance of a Settlement Agreement and Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... that TMG is harmful if swallowed, and that, upon ingestion, it targets the kidneys and central nervous... ingesting a similar product manufactured by the same overseas factory using the same ingredients list... performed by a board-certified toxicologist, which stated that none of the ingredients in the product were...

Empathy-Related Responding in Chinese Toddlers: Factorial Structure and Cognitive Contributors

ERIC Educational Resources Information Center

Huang, Heqing; Su, Yanjie; Jin, Jian

2017-01-01

The critical role of the second year of life in the development of empathy is well accepted by psychologists. However, the developmental trends of the different components of empathy and the potential factors underlying these components during this critical period remain unclear. Eighty-four Chinese toddlers in the second year of life participated…

Permethrin-Treated Clothing as Protection against the Dengue Vector, Aedes aegypti: Extent and Duration of Protection

PubMed Central

DeRaedt Banks, Sarah; Orsborne, James; Gezan, Salvador A.; Kaur, Harparkash; Wilder-Smith, Annelies; Lindsey, Steve W.; Logan, James G.

2015-01-01

Introduction Dengue transmission by the mosquito vector, Aedes aegypti, occurs indoors and outdoors during the day. Personal protection of individuals, particularly when outside, is challenging. Here we assess the efficacy and durability of different types of insecticide-treated clothing on laboratory-reared Ae. aegypti. Methods Standardised World Health Organisation Pesticide Evaluation Scheme (WHOPES) cone tests and arm-in-cage assays were used to assess knockdown (KD) and mortality of Ae. aegypti tested against factory-treated fabric, home-dipped fabric and microencapsulated fabric. Based on the testing of these three different treatment types, the most protective was selected for further analysis using arm-in cage assays with the effect of washing, ultra-violet light, and ironing investigated using high pressure liquid chromatography. Results Efficacy varied between the microencapsulated and factory dipped fabrics in cone testing. Factory-dipped clothing showed the greatest effect on KD (3 min 38.1%; 1 hour 96.5%) and mortality (97.1%) with no significant difference between this and the factory dipped school uniforms. Factory-dipped clothing was therefore selected for further testing. Factory dipped clothing provided 59% (95% CI = 49.2%– 66.9%) reduction in landing and a 100% reduction in biting in arm-in-cage tests. Washing duration and technique had a significant effect, with insecticidal longevity shown to be greater with machine washing (LW50 = 33.4) compared to simulated hand washing (LW50 = 17.6). Ironing significantly reduced permethrin content after 1 week of simulated use, with a 96.7% decrease after 3 months although UV exposure did not reduce permethrin content within clothing significantly after 3 months simulated use. Conclusion Permethrin-treated clothing may be a promising intervention in reducing dengue transmission. However, our findings also suggest that clothing may provide only short-term protection due to the effect of washing and ironing, highlighting the need for improved fabric treatment techniques. PMID:26440967

Permethrin-Treated Clothing as Protection against the Dengue Vector, Aedes aegypti: Extent and Duration of Protection.

PubMed

DeRaedt Banks, Sarah; Orsborne, James; Gezan, Salvador A; Kaur, Harparkash; Wilder-Smith, Annelies; Lindsey, Steve W; Logan, James G

2015-01-01

Dengue transmission by the mosquito vector, Aedes aegypti, occurs indoors and outdoors during the day. Personal protection of individuals, particularly when outside, is challenging. Here we assess the efficacy and durability of different types of insecticide-treated clothing on laboratory-reared Ae. aegypti. Standardised World Health Organisation Pesticide Evaluation Scheme (WHOPES) cone tests and arm-in-cage assays were used to assess knockdown (KD) and mortality of Ae. aegypti tested against factory-treated fabric, home-dipped fabric and microencapsulated fabric. Based on the testing of these three different treatment types, the most protective was selected for further analysis using arm-in cage assays with the effect of washing, ultra-violet light, and ironing investigated using high pressure liquid chromatography. Efficacy varied between the microencapsulated and factory dipped fabrics in cone testing. Factory-dipped clothing showed the greatest effect on KD (3 min 38.1%; 1 hour 96.5%) and mortality (97.1%) with no significant difference between this and the factory dipped school uniforms. Factory-dipped clothing was therefore selected for further testing. Factory dipped clothing provided 59% (95% CI = 49.2%- 66.9%) reduction in landing and a 100% reduction in biting in arm-in-cage tests. Washing duration and technique had a significant effect, with insecticidal longevity shown to be greater with machine washing (LW50 = 33.4) compared to simulated hand washing (LW50 = 17.6). Ironing significantly reduced permethrin content after 1 week of simulated use, with a 96.7% decrease after 3 months although UV exposure did not reduce permethrin content within clothing significantly after 3 months simulated use. Permethrin-treated clothing may be a promising intervention in reducing dengue transmission. However, our findings also suggest that clothing may provide only short-term protection due to the effect of washing and ironing, highlighting the need for improved fabric treatment techniques.

The factorial structure of job-related affective well-being: Polish adaptation of the Warr's measure.

PubMed

Mielniczuk, Emilia; Łaguna, Mariola

2018-02-16

The first aim of the study reported in this article was to test the factorial structure of job-related affect in a Polish sample. The second aim was to develop the Polish adaptation of the Warr's job-related affective well-being measure published in 1990, which is designed to assess 4 types of affect at work: anxiety, comfort, depression, enthusiasm. A longitudinal study design with 2 measurement times was used for verifying the psychometric properties of the Polish version of the measure. The final sample consisted of 254 Polish employees from different professions. Participants were asked to fill in a set of questionnaires consisting of measures capturing job-related affective well-being, mood, and turnover intention. The first step of analysis was to test the theoretically-based structure of the job-related affective well-being measure in a Polish sample. The confirmatory factor analysis revealed that a 4-factor model best describes the structure of the measure in comparison to 5 alternative models. Next, reliability of this measure was assessed. All scales achieved good internal consistency and acceptable test-retest reliability after 2 weeks. Finally, the convergent and discriminant validity as well as the criterion and predictive validity of all job-related affective well-being scales was confirmed, based on correlations between job-related affect and mood as well as turnover intention. The results suggest that the Polish adaptation of Warr's job-related affective well-being measure can be used by scientists as well as by practitioners who aim at assessing 4 types of affective well-being at a work context. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Factor structure and psychometric properties of the trier inventory for chronic stress (TICS) in a representative german sample

PubMed Central

2012-01-01

Background Chronic stress results from an imbalance of personal traits, resources and the demands placed upon an individual by social and occupational situations. This chronic stress can be measured using the Trier Inventory for Chronic Stress (TICS). Aims of the present study are to test the factorial structure of the TICS, report its psychometric properties, and evaluate the influence of gender and age on chronic stress. Methods The TICS was answered by N = 2,339 healthy participants aged 14 to 99. The sample was selected by random-route sampling. Exploratory factor analyses with Oblimin-rotated Principal Axis extraction were calculated. Confirmatory factor analyses applying Robust Maximum Likelihood estimations (MLM) tested model fit and configural invariance as well as the measurement invariance for gender and age. Reliability estimations and effect sizes are reported. Results In the exploratory factor analyses, both a two-factor and a nine-factor model emerged. Confirmatory factor analyses resulted in acceptable model fit (RMSEA), with model comparison fit statistics corroborating the superiority of the nine-factor model. Most factors were moderately to highly intercorrelated. Reliabilities were good to very good. Measurement invariance tests gave evidence for differential effects of gender and age on the factor structure. Furthermore, women and younger individuals, especially those aged 35 to 44, tended to report more chronic stress than men and older individuals. Conclusions The proposed nine-factor structure could be factorially validated, results in good scale reliability, and heuristically can be grouped by two higher-order factors: "High Demands" and "Lack of Satisfaction". Age and gender represent differentiable and meaningful contributors to the perception of chronic stress. PMID:22463771

Education and the Culture of Consumption: Personalisation and the Social Order

ERIC Educational Resources Information Center

Hartley, David

2012-01-01

For nearly 200 years the organisational form of the school has changed little. Bureaucracy has been its enduring form. The school has prepared the worker for the factory of mass production. It has created the "mass consumer" to be content with accepting what is on offer, not what is wanted. However, a "revised" educational code appears to be…

31 CFR 1010.330 - Reports relating to currency in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2013 CFR

2013-07-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (8) Collectible. The term... identification card, or other official document evidencing nationality or residence. Verification of the identity... identification when cashing or accepting checks (for example, a driver's license or a credit card). In addition...

31 CFR 1010.330 - Reports relating to currency in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2014 CFR

2014-07-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (8) Collectible. The term... identification card, or other official document evidencing nationality or residence. Verification of the identity... identification when cashing or accepting checks (for example, a driver's license or a credit card). In addition...

Muon Acceleration Concepts for NuMAX: "Dual-use" Linac and "Dogbone" RLA

DOE PAGES

Bogacz, S. A.

2018-02-01

In this paper, we summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival for the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to an initially low RF frequency, e.g., 325 MHz, which is then increased to 650 MHz asmore » the transverse size shrinks with increasing energy. High-gradient normal conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. Finally, we consider two cost effective schemes for accelerating muon beams for a stageable Neutrino Factory: exploration of the so-called "dual-use" linac concept, where the same linac structure is used for acceleration of both H - and muons and, alternatively, an SRF-efficient design based on a multi-pass (4.5) "dogbone" RLA, extendable to multi-pass FFAG-like arcs.« less

Performing Contrast Analysis in Factorial Designs: From NHST to Confidence Intervals and Beyond

PubMed Central

Wiens, Stefan; Nilsson, Mats E.

2016-01-01

Because of the continuing debates about statistics, many researchers may feel confused about how to analyze and interpret data. Current guidelines in psychology advocate the use of effect sizes and confidence intervals (CIs). However, researchers may be unsure about how to extract effect sizes from factorial designs. Contrast analysis is helpful because it can be used to test specific questions of central interest in studies with factorial designs. It weighs several means and combines them into one or two sets that can be tested with t tests. The effect size produced by a contrast analysis is simply the difference between means. The CI of the effect size informs directly about direction, hypothesis exclusion, and the relevance of the effects of interest. However, any interpretation in terms of precision or likelihood requires the use of likelihood intervals or credible intervals (Bayesian). These various intervals and even a Bayesian t test can be obtained easily with free software. This tutorial reviews these methods to guide researchers in answering the following questions: When I analyze mean differences in factorial designs, where can I find the effects of central interest, and what can I learn about their effect sizes? PMID:29805179

New generation electron-positron factories

NASA Astrophysics Data System (ADS)

Zobov, Mikhail

2011-09-01

In 2010 we celebrate 50 years since commissioning of the first particle storage ring ADA in Frascati (Italy) that also became the first electron-positron collider in 1964. After that date the particle colliders have increased their intensity, luminosity and energy by several orders of magnitude. Namely, because of the high stored beam currents and high rate of useful physics events (luminosity) the modern electron-positron colliders are called "factories". However, the fundamental physics has required luminosities by 1-2 orders of magnitudes higher with respect to those presently achieved. This task can be accomplished by designing a new generation of factories exploiting the potential of a new collision scheme based on the Crab Waist (CW) collision concept recently proposed and successfully tested at Frascati. In this paper we discuss the performance and limitations of the present generation electron-positron factories and give a brief overview of new ideas and collision schemes proposed for further collider luminosity increase. In more detail we describe the CW collision concept and the results of the crab waist collision tests in DAϕNE, the Italian ϕ-factory. Finally, we briefly describe most advanced projects of the next generation factories based on the CW concept: SuperB in Italy, SuperKEKB in Japan and SuperC-Tau in Russia.

The Status of Turkish Accelerator Center Test Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yavas, Oe.

2007-04-23

Recently, conceptual design of Turkic Accelerator Center (TAC) proposal was completed. Main goal of this proposal is a charm factory that consists of a linac-ring type electron-positron collider. In addition, synchrotron radiation from the positron ring and free electron laser from the electron linac are proposed. The project related with this proposal has been accepted by Turkish government. It is planned that the Technical Design Report of TAC will have been written in next three years. In this period, an infrared oscillator free electron laser (IR FEL) will be constructed as a test facility for TAC. 20 and 50 MeVmore » electron energies will be used to obtain infra red free electron laser. The main parameters of the electron linac, the optical cavities and the free electron laser were determined. The possible use of obtained laser beam in basic and applied research areas such as biotechnology, nanotechnology, semiconductors and photo chemistry were stated.« less

Validation of Self-Image of Aging Scale for Chinese elders.

PubMed

Bai, Xue; Chan, K S; Chow, Nelson

2012-01-01

Researchers are increasingly interested in the "image of aging" concept. Models on the image of aging abound, but few have rigorously tested measures that are culturally sensitive and domain-specific. This study first translates Levy et al.'s (2004) Image of Aging Scale into the Chinese language and revises it into the Chinese Version of the Self-Image of Aging Scale (SIAS-C). Based on the results of a survey of 445 elderly people in Wuhan-China, it then reports the factorial structure of SIAS-C and some of its psychometric properties. Confirmatory factor analysis (CFA) supports a conceptually meaningful five-factor model, as suggested in an exploratory factor analysis (EFA). The 14-item SIAS-C vindicates an acceptable level of internal consistency and test-retest reliability. Its criteria-referenced validity is demonstrated by its correlation with several criteria in expected directions. In conclusion, the SIAS-C is a psychometrically sound instrument which is recommended for use among Chinese older people.

Factorial versus multi-arm multi-stage designs for clinical trials with multiple treatments.

PubMed

Jaki, Thomas; Vasileiou, Despina

2017-02-20

When several treatments are available for evaluation in a clinical trial, different design options are available. We compare multi-arm multi-stage with factorial designs, and in particular, we will consider a 2 × 2 factorial design, where groups of patients will either take treatments A, B, both or neither. We investigate the performance and characteristics of both types of designs under different scenarios and compare them using both theory and simulations. For the factorial designs, we construct appropriate test statistics to test the hypothesis of no treatment effect against the control group with overall control of the type I error. We study the effect of the choice of the allocation ratios on the critical value and sample size requirements for a target power. We also study how the possibility of an interaction between the two treatments A and B affects type I and type II errors when testing for significance of each of the treatment effects. We present both simulation results and a case study on an osteoarthritis clinical trial. We discover that in an optimal factorial design in terms of minimising the associated critical value, the corresponding allocation ratios differ substantially to those of a balanced design. We also find evidence of potentially big losses in power in factorial designs for moderate deviations from the study design assumptions and little gain compared with multi-arm multi-stage designs when the assumptions hold. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

Physicochemical and bacteriological quality of bottled drinking water in three sites of Amhara Regional State, Ethiopia.

PubMed

Biadglegne, Fantahun; Tessema, Belay; Kibret, Mulugeta; Abera, Bayeh; Huruy, Kahsay; Anagaw, Belay; Mulu, Andargachew

2009-10-01

The consumption of bottled drinking water is becoming increasing in Ethiopia. As a result there has been a growing concern about the chemical, physical and bacteriological quality of this product. Studies on the chemical, physical and bacteriological quality of bottled water is quite scarce in Ethiopia. This study was therefore aimed to assess the physicochemical and bacteriological qualities of three factories of bottled drinking water products produced in Amhara region. A Laboratory based comparative study was conducted to evaluate the physicochemical and bacteriological quality of three factories of bottled drinking water produced in Amhara region. Analysis on the quality of bottled drinking water from the sources, wholesalers and retailers were made with World Health Organization and Quality and Standards Authority of Ethiopia recommendations. Triplicate samples from three types of bottled drinking water were randomly collected and analyzed from June, 2006 to December, 2006. A total of 108 commercial bottled drinking water samples were analyzed. The result showed that except pH of factory A all the physicochemical parameters analyzed were with in the recommended limits. The pH value of factory A tested from sources is 5.3 and from wholesalers and retailers is 5.5 and 5.3, respectively, which is below the normal value set by World Health Organization (6.5-8.0) and Quality and Standards Authority of Ethiopia (6.0-8.5). Our analyses also demonstrated that 2 (16.7%) of the samples tested from sources and 1 (8.3%) from wholesalers of factory B were contaminated with total coliforms, where as 2 (16.7%) samples from retailers were also contaminated with total coliforms. On the other hand, 1 (8.3%) of the samples tested from wholesalers and 2 (16.7%) of the samples tested from retailers of factory A were also contaminated with total coliforms. Total coliforms were not detected from all samples of factory C, fecal coliforms were not also isolated from all samples. Percent of coefficient of variation showed that variations in total coliforms counts were significant with in the samples of both factory A and B (CV > 10%). Based on the recommended limit of World Health Organization and Quality and Standards Authority of Ethiopia, 7.4% of bottled drinking water sold commercially could be considered unfit for human consumption. Consumers of bottled water should be aware of this.

Two Tracks of Thought: A Structural Model of the Test for Creative Thinking-Drawing Production (TCT-DP)

ERIC Educational Resources Information Center

Nogueira, Sara Ibérico; Almeida, Leonor S.; Lima, Tiago Souza

2017-01-01

The Test for Creative Thinking-Drawing Production (TCT-DP, Urban & Jellen, 1986) is one of the most used instruments for the assessment of creative potential. Few studies exist regarding its factorial structure, and all of them were limited to using an exploratory approach. The aim of this research was to assess the factorial structure of the…

A community-initiated study of blood lead levels of Nicaraguan children living near a battery factory.

PubMed Central

Morales Bonilla, C; Mauss, E A

1998-01-01

OBJECTIVES: In response to requests by parents in Managua, Nicaragua, whose neighborhood borders a battery factory, 97 children were tested for blood lead, as were 30 children in a neighborhood without an obvious source of environmental lead. METHODS: Venous blood was examined by atomic absorption spectrophotometry. Educational workshops were conducted. RESULTS: Mean blood lead levels were 17.21 +/- 9.92 micrograms/dL in the index children and 7.40 +/- 5.37 micrograms/dL in the controls (P < .001). CONCLUSIONS: Children living near the battery factory are at increased risk of lead poisoning. The parents were able to petition the government to control the factory emissions and to improve appropriate health services. The factory is now closed. PMID:9842385

Evaluation of a laser scanner for large volume coordinate metrology: a comparison of results before and after factory calibration

NASA Astrophysics Data System (ADS)

Ferrucci, M.; Muralikrishnan, B.; Sawyer, D.; Phillips, S.; Petrov, P.; Yakovlev, Y.; Astrelin, A.; Milligan, S.; Palmateer, J.

2014-10-01

Large volume laser scanners are increasingly being used for a variety of dimensional metrology applications. Methods to evaluate the performance of these scanners are still under development and there are currently no documentary standards available. This paper describes the results of extensive ranging and volumetric performance tests conducted on a large volume laser scanner. The results demonstrated small but clear systematic errors that are explained in the context of a geometric error model for the instrument. The instrument was subsequently returned to the manufacturer for factory calibration. The ranging and volumetric tests were performed again and the results are compared against those obtained prior to the factory calibration.

[Acceptance of tinnitus: Validation of the ‛Akzeptanzfragebogen bei chronischem Tinnitus' (AFCT)].

PubMed

Riedl, D; Rumpold, G; Schmidt, A; Bliem, H R; Moschen, R

2014-12-01

Tinnitus is a widely spread symptom, which is perceived chronically by approximately 10% of the population. The vast majority of the tinnitus patients doesn´t feel impaired through the ear noise, but about 5-30% of the tinnitus patient are suffering in their everyday life. Whether severe distress is experienced cannot be explained by the quality of the ear noise itself (i. e. loudness or duration). Newer research tends to explain the difference in the experienced strain by the concept of acceptance. The aim of this study was to analyze the psychometric quality of a German Version of the "Chronic Pain Acceptance Ques-tionnaire" (CPAQ), namely the "Akzeptanzfragebogen bei chronischem Tinnitus" (AFCT) which has been adapted for tinnitus. 97 patients with chronic tinnitus have been tested at the start of an outpatient tinnitus group therapy. The following questionnaires were used: "Akzeptanzfragebogen bei chronischem Tinnitus" (AFCT) and "Tinnitusfragebogen" (TF). The structure of the AFCT was determined by a factor analysis. The reliability was evaluated by the estimation of the internal consistency (Cronbach Alpha). Due to psychometric weakness and unclear factorial loadings 8 items have been removed. Out of the remaining 12 items the AFCT-12 has been developed. The AFCT-12 consists of 2 factors, which explain a variance of 54.9%. Both AFCT-12 and AFCT have a satisfactory reliability and validity. The results demonstrate that the AFCT-12 is a reliable and valid instrument to measure the acceptance of patients suffering from chronic tinnitus. © Georg Thieme Verlag KG Stuttgart · New York.

Dust exposure and chronic respiratory symptoms among coffee curing workers in Kilimanjaro: a cross sectional study.

PubMed

Sakwari, Gloria; Bråtveit, Magne; Mamuya, Simon H D; Moen, Bente E

2011-11-24

Coffee processing causes organic dust exposure which may lead to development of respiratory symptoms. Previous studies have mainly focused on workers involved in roasting coffee in importing countries. This study was carried out to determine total dust exposure and respiratory health of workers in Tanzanian primary coffee-processing factories. A cross sectional study was conducted among 79 workers in two coffee factories, and among 73 control workers in a beverage factory. Personal samples of total dust (n = 45 from the coffee factories and n = 19 from the control factory) were collected throughout the working shift from the breathing zone of the workers. A questionnaire with modified questions from the American Thoracic Society questionnaire was used to assess chronic respiratory symptoms. Differences between groups were tested by using independent t-tests and Chi square tests. Poisson Regression Model was used to estimate prevalence ratio, adjusting for age, smoking, presence of previous lung diseases and years worked in dusty factories. All participants were male. The coffee workers had a mean age of 40 years and were older than the controls (31 years). Personal total dust exposure in the coffee factories were significantly higher than in the control factory (geometric mean (GM) 1.23 mg/m3, geometric standard deviation (GSD) (0.8) vs. 0.21(2.4) mg/m3). Coffee workers had significantly higher prevalence than controls for cough with sputum (23% vs. 10%; Prevalence ratio (PR); 2.5, 95% CI 1.0-5.9) and chest tightness (27% vs. 13%; PR; 2.4, 95% CI 1.1-5.2). The prevalence of morning cough, cough with and without sputum for 4 days or more in a week was also higher among coffee workers than among controls. However, these differences were not statistically significant. Workers exposed to coffee dust reported more respiratory symptoms than did the controls. This might relate to their exposure to coffee dust. Interventions for reduction of dust levels and provision of respiratory protective equipment are recommended.

Dust exposure and chronic respiratory symptoms among coffee curing workers in Kilimanjaro: a cross sectional study

PubMed Central

2011-01-01

Background Coffee processing causes organic dust exposure which may lead to development of respiratory symptoms. Previous studies have mainly focused on workers involved in roasting coffee in importing countries. This study was carried out to determine total dust exposure and respiratory health of workers in Tanzanian primary coffee-processing factories. Methods A cross sectional study was conducted among 79 workers in two coffee factories, and among 73 control workers in a beverage factory. Personal samples of total dust (n = 45 from the coffee factories and n = 19 from the control factory) were collected throughout the working shift from the breathing zone of the workers. A questionnaire with modified questions from the American Thoracic Society questionnaire was used to assess chronic respiratory symptoms. Differences between groups were tested by using independent t-tests and Chi square tests. Poisson Regression Model was used to estimate prevalence ratio, adjusting for age, smoking, presence of previous lung diseases and years worked in dusty factories. Results All participants were male. The coffee workers had a mean age of 40 years and were older than the controls (31 years). Personal total dust exposure in the coffee factories were significantly higher than in the control factory (geometric mean (GM) 1.23 mg/m3, geometric standard deviation (GSD) (0.8) vs. 0.21(2.4) mg/m3). Coffee workers had significantly higher prevalence than controls for cough with sputum (23% vs. 10%; Prevalence ratio (PR); 2.5, 95% CI 1.0 - 5.9) and chest tightness (27% vs. 13%; PR; 2.4, 95% CI 1.1 - 5.2). The prevalence of morning cough, cough with and without sputum for 4 days or more in a week was also higher among coffee workers than among controls. However, these differences were not statistically significant. Conclusion Workers exposed to coffee dust reported more respiratory symptoms than did the controls. This might relate to their exposure to coffee dust. Interventions for reduction of dust levels and provision of respiratory protective equipment are recommended. PMID:22114929

Rapid enteric testing to permit targeted antimicrobial therapy, with and without Lactobacillus reuteri probiotics, for paediatric acute diarrhoeal disease in Botswana: A pilot, randomized, factorial, controlled trial.

PubMed

Pernica, Jeffrey M; Steenhoff, Andrew P; Mokomane, Margaret; Moorad, Banno; Lechiile, Kwana; Smieja, Marek; Mazhani, Loeto; Cheng, Ji; Kelly, Matthew S; Loeb, Mark; Stordal, Ketil; Goldfarb, David M

2017-01-01

Diarrhoeal disease is the second-leading cause of death in young children. Current guidelines recommend treating children with acute non-bloody diarrhea with oral rehydration solutions and zinc, but not antimicrobials. However, in many resource-limited settings, infections with treatable enteric bacterial and protozoan pathogens are common. Probiotics have shown promise as an adjunct treatment for diarrhoea but have not been studied in sub-Saharan Africa. We conducted a pilot, factorial, randomized, placebo-controlled trial of children aged 2-60 months hospitalized in Botswana for acute non-bloody diarrhoea. A rapid test-and-treat intervention, consisting of multiplex PCR testing of rectal swabs taken at enrolment, accompanied by targeted antimicrobial therapy if treatable pathogens were detected, was compared to the reference standard of no stool testing. Additionally, Lactobacillus reuteri DSM 17938 x 60 days was compared to placebo treatment. The main objective of this pilot study was to assess feasibility. The primary clinical outcome was the increase in age-standardized height (HAZ) at 60 days adjusted for baseline HAZ. Seventy-six patients were enrolled over a seven-month study period. We judged that the recruitment rate, lab processing times, communication protocols, provision of specific antimicrobials, and follow-up rates were acceptable. Compared to the reference arm (no stool testing and placebo treatment), the combination of the rapid test-and-treat strategy plus L. reuteri DSM 17938 was associated with an increase of 0.61 HAZ (95% CI 0.09-1.13) and 93% lower odds of recurrent diarrhoea (OR 0.07, 95%CI 0.01-0.61) at 60 days. We demonstrated that it was feasible to evaluate the study interventions in Botswana. Despite the small sample size, we observed a statistically significant increase in HAZ at 60 days and significantly lower odds of recurrent diarrhoea in children receiving both rapid test-and-treat and L. reuteri. There is sufficient evidence to warrant proceeding with a larger follow-up trial in a similar setting.

Combustion of liquid paint wastes in fluidized bed boiler as element of waste management system in the paint factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soko, W.A.; Biaecka, B.

1998-12-31

In this paper the solution to waste problems in the paint industry is presented by describing their combustion in a fluidized bed boiler as a part of the waste management system in the paint factory. Based on the Cleaner Production idea and concept of integration of design process with a future exploitation of equipment, some modifications of the waste management scheme in the factory are discussed to reduce the quantity of toxic wastes. To verify this concept combustion tests of paint production wastes and cocombustion of paint wastes with coal in an adopted industrial boiler were done. Results of thesemore » tests are presented in the paper.« less

Perceived Competence Scale for Children: Testing for Factorial Validity and Invariance across Age and Ability.

ERIC Educational Resources Information Center

Byrne, Barbara M.; Schneider, Barry H.

1988-01-01

For 241 normal and 132 gifted fifth graders and 113 normal and 117 gifted seventh graders in Ottawa (Ontario), exploratory and confirmatory factor analyses investigated the factorial validity of the Perceived Competence Scale for Children (PCSC). Overall, the PCSC demonstrated sound psychometric properties. (SLD)

Muon Accelerator Program (MAP) | Neutrino Factory | Research Goals

Science.gov Websites

; Committees Research Goals Research & Development Design & Simulation Technology Development Systems Demonstrations Activities MASS Muon Cooling MuCool Test Area MICE Experiment MERIT Muon Collider Research Goals Why Muons at the Energy Frontier? How does it work? Graphics Animation Neutrino Factory Research Goals

An examination of effect estimation in factorial and standardly-tailored designs

PubMed Central

Allore, Heather G; Murphy, Terrence E

2012-01-01

Background Many clinical trials are designed to test an intervention arm against a control arm wherein all subjects are equally eligible for all interventional components. Factorial designs have extended this to test multiple intervention components and their interactions. A newer design referred to as a ‘standardly-tailored’ design, is a multicomponent interventional trial that applies individual interventional components to modify risk factors identified a priori and tests whether health outcomes differ between treatment arms. Standardly-tailored designs do not require that all subjects be eligible for every interventional component. Although standardly-tailored designs yield an estimate for the net effect of the multicomponent intervention, it has not yet been shown if they permit separate, unbiased estimation of individual component effects. The ability to estimate the most potent interventional components has direct bearing on conducting second stage translational research. Purpose We present statistical issues related to the estimation of individual component effects in trials of geriatric conditions using factorial and standardly-tailored designs. The medical community is interested in second stage translational research involving the transfer of results from a randomized clinical trial to a community setting. Before such research is undertaken, main effects and synergistic and or antagonistic interactions between them should be identified. Knowledge of the relative strength and direction of the effects of the individual components and their interactions facilitates the successful transfer of clinically significant findings and may potentially reduce the number of interventional components needed. Therefore the current inability of the standardly-tailored design to provide unbiased estimates of individual interventional components is a serious limitation in their applicability to second stage translational research. Methods We discuss estimation of individual component effects from the family of factorial designs and this limitation for standardly-tailored designs. We use the phrase ‘factorial designs’ to describe full-factorial designs and their derivatives including the fractional factorial, partial factorial, incomplete factorial and modified reciprocal designs. We suggest two potential directions for designing multicomponent interventions to facilitate unbiased estimates of individual interventional components. Results Full factorial designs and their variants are the most common multicomponent trial design described in the literature and differ meaningfully from standardly-tailored designs. Factorial and standardly-tailored designs result in similar estimates of net effect with different levels of precision. Unbiased estimation of individual component effects from a standardly-tailored design will require new methodology. Limitations Although clinically relevant in geriatrics, previous applications of standardly-tailored designs have not provided unbiased estimates of the effects of individual interventional components. Discussion Future directions to estimate individual component effects from standardly-tailored designs include applying D-optimal designs and creating independent linear combinations of risk factors analogous to factor analysis. Conclusion Methods are needed to extract unbiased estimates of the effects of individual interventional components from standardly-tailored designs. PMID:18375650

Validation of the German revised version of the program in palliative care education and practice questionnaire (PCEP-GR).

PubMed

Fetz, Katharina; Wenzel-Meyburg, Ursula; Schulz-Quach, Christian

2017-12-28

The evaluation of the effectiveness of undergraduate palliative care education (UPCE) programs is an essential foundation to providing high-quality UPCE programs. Therefore, the implementation of valid evaluation tools is indispensable. Until today, there has been no general consensus regarding concrete outcome parameters and their accurate measurement. The Program in Palliative Care Education and Practice Questionnaire (German Revised Version; PCEP-GR) is a promising assessment tool for UPCE. The aim of the current study was to evaluate the psychometric properties of PCEP-GR and to demonstrate its feasibility for the evaluation of UPCE programs. The practical feasibility of the PCEP-GR and its acceptance in medical students were investigated in a pilot study with 24 undergraduate medical students at Heinrich Heine University Dusseldorf, Germany. Subsequently, the PCEP-GR was surveyed in a representative sample (N = 680) of medical students in order to investigate its psychometric properties. Factorial validity was investigated by means of principal component analysis (PCA). Reliability was examined by means of split-half-reliability analysis and analysis of internal consistency. After taking into consideration the PCA and distribution analysis results, an evaluation instruction for the PCEP-GR was developed. The PCEP-GR proved to be feasible and well-accepted in medical students. PCA revealed a four-factorial solution indicating four PCEP-GR subscales: preparation to provide palliative care, attitudes towards palliative care, self-estimation of competence in communication with dying patients and their relatives and self-estimation of knowledge and skills in palliative care. The PCEP-GR showed good split-half-reliability and acceptable to good internal consistency of subscales. Attitudes towards palliative care slightly missed the criterion of acceptable internal consistency. The evaluation instruction suggests a global PCEP-GR index and four subscales. The PCEP-GR has proven to be a feasible, economic, valid and reliable tool for the assessment of UPCE that comprises self-efficacy expectation and relevant attitudes towards palliative care.

Measurement of radiation damage on an epoxy-based optical glue

NASA Astrophysics Data System (ADS)

Huang, H. C.; Peng, K. C.; Sahu, S. K.; Ueno, K.; Chang, Y. H.; Wang, C. H.; Hou, W. S.

1997-02-01

We measured the radiation damage on an optical glue called Eccobond-24, which is a candidate for CsI and BGO crystal calorimeters of the BELLE detector of the KEK B-factory. Absorption spectrophotometry in the range 300-800 nm was used to monitor the radiation damage. The maximum equivalent dose was 1.64 Mrad. The glue shows effects of damage, but is acceptable for the radiation level in the above-mentioned experiment.

Cultured meat: every village its own factory?

PubMed

van der Weele, Cor; Tramper, Johannes

2014-06-01

Rising global demand for meat will result in increased environmental pollution, energy consumption, and animal suffering. Cultured meat, produced in an animal-cell cultivation process, is a technically feasible alternative lacking these disadvantages, provided that an animal-component-free growth medium can be developed. Small-scale production looks particularly promising, not only technologically but also for societal acceptance. Economic feasibility, however, emerges as the real obstacle. Copyright © 2014 Elsevier Ltd. All rights reserved.

Factory-Calibrated Continuous Glucose Sensors: The Science Behind the Technology.

PubMed

Hoss, Udo; Budiman, Erwin Satrya

2017-05-01

The use of commercially available continuous glucose monitors for diabetes management requires sensor calibrations, which until recently are exclusively performed by the patient. A new development is the implementation of factory calibration for subcutaneous glucose sensors, which eliminates the need for user calibrations and the associated blood glucose tests. Factory calibration means that the calibration process is part of the sensor manufacturing process and performed under controlled laboratory conditions. The ability to move from a user calibration to factory calibration is based on several technical requirements related to sensor stability and the robustness of the sensor manufacturing process. The main advantages of factory calibration over the conventional user calibration are: (a) more convenience for the user, since no more fingersticks are required for calibration and (b) elimination of use errors related to the execution of the calibration process, which can lead to sensor inaccuracies. The FreeStyle Libre ™ and FreeStyle Libre Pro ™ flash continuous glucose monitoring systems are the first commercially available sensor systems using factory-calibrated sensors. For these sensor systems, no user calibrations are required throughout the sensor wear duration.

Factory-Calibrated Continuous Glucose Sensors: The Science Behind the Technology

PubMed Central

Budiman, Erwin Satrya

2017-01-01

Abstract The use of commercially available continuous glucose monitors for diabetes management requires sensor calibrations, which until recently are exclusively performed by the patient. A new development is the implementation of factory calibration for subcutaneous glucose sensors, which eliminates the need for user calibrations and the associated blood glucose tests. Factory calibration means that the calibration process is part of the sensor manufacturing process and performed under controlled laboratory conditions. The ability to move from a user calibration to factory calibration is based on several technical requirements related to sensor stability and the robustness of the sensor manufacturing process. The main advantages of factory calibration over the conventional user calibration are: (a) more convenience for the user, since no more fingersticks are required for calibration and (b) elimination of use errors related to the execution of the calibration process, which can lead to sensor inaccuracies. The FreeStyle Libre™ and FreeStyle Libre Pro™ flash continuous glucose monitoring systems are the first commercially available sensor systems using factory-calibrated sensors. For these sensor systems, no user calibrations are required throughout the sensor wear duration. PMID:28541139

Decolorization of turbid sugar juice from sugar factory using waste powdered carbon

NASA Astrophysics Data System (ADS)

Aljohani, Hind; Ahmed, Youssef; El-Shafey, Ola; El-Shafey, Shaymaa; Fouad, Rasha; Shoueir, Kamel

2018-03-01

Waste management of powdered activated carbon from cyclone of some sugar factories was used for decolorization of sugar mud juice (SMJ) in this study. The presence of powdered activated carbon waste (PACW) was admitted again for their use in SMJ decolorization. The determined specific surface area are typically S BET = 613.887 m2/g and the pore distribution lies in mesoporous domain. Color removal (CR%) and decolorization capacity (DC) of the characterized PACW are similar to those of decolorants used at this time for sugar refining. The CR% with PACW reached 81.03% at pH7.0 and dosed in the amount 0.5 g/50 ml of SMJ. There are two acceptable mechanisms illustrates the attachments between phenols and carboxylate ions. In this paper, we put a simple and rapid dark liquid decolorization by controlling rejected carbon waste, which will be useful for treatment of dark liquid sugar.

Formulation of tretinoin-loaded topical proniosomes for treatment of acne: in-vitro characterization, skin irritation test and comparative clinical study.

PubMed

Rahman, Salwa Abdel; Abdelmalak, Nevine Shawky; Badawi, Alia; Elbayoumy, Tahany; Sabry, Nermeen; El Ramly, Amany

2015-01-01

Tretinoin (TRT) is a widely used retinoid for the topical treatment of acne, photo-aged skin, psoriasis and skin cancer which makes it a good candidate for topical formulation. Yet side effects, like redness, swelling, peeling, blistering and, erythema, in addition to its high lipophilicity make this challenging. Therefore, the aim of this study was the development of TRT-loaded proniosomes to improve the drug efficacy and to increase user acceptability and compliance by reducing its side effects. Nine formulae were prepared according to 3(2) factorial design and were evaluated for their morphology, vesicle size, entrapment efficiency (EE %), and% of drug released after 5 h. Hydrogel of the candidate formula, N8G (proniosomes prepared with 0.025% TRT, and Span60: cholesterol molar ratio of 3:1 and incorporated in 1% carbopol gel) was developed and evaluated for skin irritation test and clinical study in acne patients compared to marketed product. Candidate formula showed higher efficacy and very low irritation potential when compared to marketed product in human volunteers.

One-Minute Fish Freshness Evaluation by Testing the Volatile Amine Gas with an Ultrasensitive Porous-Electrode-Capped Organic Gas Sensor System.

PubMed

Chang, Liang-Yu; Chuang, Ming-Yen; Zan, Hsiao-Wen; Meng, Hsin-Fei; Lu, Chia-Jung; Yeh, Ping-Hung; Chen, Jian-Nan

2017-04-28

In this work, we successfully demonstrate a fast method to determine the fish freshness by using a sensing system containing an ultrasensitive amine gas sensor to detect the volatile amine gas from the raw fish meat. When traditional titration method takes 4 h and complicated steps to test the total volatile basic nitrogen (TVB-N) as a worldwide standard for fish freshness, our sensor takes 1 min to deliver an electrical sensing response that is highly correlated with the TVB-N value. When detecting a fresh fish with a TVB-N as 18 mg/100 g, the sensor delivers an effective ammonia concentration as 100 ppb. For TVB-N as 28-35 mg/100 g, a well-accepted freshness limit, the effective ammonia concentration is as 200-300 ppb. The ppb-regime sensitivity of the sensor and the humidity control in the sensing system are the keys to realizing fast and accurate detection. It is expected that the results in this report enable the development of on-site freshness detection and real-time monitoring in a fish factory.

Gaming in the Classroom: An Innovative Way to Teach Factorial Designs

ERIC Educational Resources Information Center

Stansbury, Jessica A.; Munro, Geoffrey D.

2013-01-01

This study tested the effectiveness of video game use for instruction of factorial designs in a research methods course. Students designed and conducted a mini study, playing "Dance, Dance, Revolution", using video game scores as the dependent variable. A mixed-design analysis of variance revealed a significantly greater increase from pretest to…

Cultural Validation of the Maslach Burnout Inventory for Korean Students

ERIC Educational Resources Information Center

Shin, Hyojung; Puig, Ana; Lee, Jayoung; Lee, Ji Hee; Lee, Sang Min

2011-01-01

The purpose of this study was to examine the factorial validity of the MBI-SS in Korean students. Specifically, we investigated whether the original three-factor structure of the MBI-SS was appropriate for use with Korean students. In addition, by running multi-group structural equation model analyses with factorial invariance tests simultaneously…

Translational Bounds for Factorial n and the Factorial Polynomial

ERIC Educational Resources Information Center

Mahmood, Munir; Edwards, Phillip

2009-01-01

During the period 1729-1826 Bernoulli, Euler, Goldbach and Legendre developed expressions for defining and evaluating "n"! and the related gamma function. Expressions related to "n"! and the gamma function are a common feature in computer science and engineering applications. In the modern computer age people live in now, two common tests to…

The Analysis of Completely Randomized Factorial Experiments When Observations Are Lost at Random.

ERIC Educational Resources Information Center

Hummel, Thomas J.

An investigation was conducted of the characteristics of two estimation procedures and corresponding test statistics used in the analysis of completely randomized factorial experiments when observations are lost at random. For one estimator, contrast coefficients for cell means did not involve the cell frequencies. For the other, contrast…

On the Factorial Structure of the SAT and Implications for Next-Generation College Readiness Assessments

ERIC Educational Resources Information Center

Wiley, Edward W.; Shavelson, Richard J.; Kurpius, Amy A.

2014-01-01

The name "SAT" has become synonymous with college admissions testing; it has been dubbed "the gold standard." Numerous studies on its reliability and predictive validity show that the SAT predicts college performance beyond high school grade point average. Surprisingly, studies of the factorial structure of the current version…

More Powerful Tests of Simple Interaction Contrasts in the Two-Way Factorial Design

ERIC Educational Resources Information Center

Hancock, Gregory R.; McNeish, Daniel M.

2017-01-01

For the two-way factorial design in analysis of variance, the current article explicates and compares three methods for controlling the Type I error rate for all possible simple interaction contrasts following a statistically significant interaction, including a proposed modification to the Bonferroni procedure that increases the power of…

Information-Processing Architectures in Multidimensional Classification: A Validation Test of the Systems Factorial Technology

ERIC Educational Resources Information Center

Fific, Mario; Nosofsky, Robert M.; Townsend, James T.

2008-01-01

A growing methodology, known as the systems factorial technology (SFT), is being developed to diagnose the types of information-processing architectures (serial, parallel, or coactive) and stopping rules (exhaustive or self-terminating) that operate in tasks of multidimensional perception. Whereas most previous applications of SFT have been in…

Factorial Validity and Psychometric Examination of the Exercise Dependence Scale-Revised

ERIC Educational Resources Information Center

Downs, Danielle Symons; Hausenblas, Heather A.; Nigg, Claudio R.

2004-01-01

The research purposes were to examine the factorial and convergent validity, internal consistency, and test-retest reliability of the Exercise Dependence Scale (EDS). Two separate studies, containing a total of 1,263 college students, were undertaken to accomplish these purposes. Participants completed the EDS and measures of exercise behavior and…

Is there a reliable factorial structure in the 20-item Toronto Alexithymia Scale? A comparison of factor models in clinical and normal adult samples.

PubMed

Müller, Jochen; Bühner, Markus; Ellgring, Heiner

2003-12-01

The 20-item Toronto Alexithymia Scale (TAS-20) is the most widely used instrument for measuring alexithymia. However, different studies did not always yield identical factor structures of this scale. The present study aims at clarifying some discrepant results. Maximum likelihood confirmatory factor analyses of a German version of the TAS-20 were conducted on data from a clinical sample (N=204) and a sample of normal adults (N=224). Five different models with one to four factors were compared. A four-factor model with factors (F1) "Difficulty identifying feelings" (F2), "Difficulty describing feelings" (F3), "Low importance of emotion" and (F4) "Pragmatic thinking" and a three-factor model with the combined factor "Difficulties in identifying and describing feelings" described the data best. Factors related to "externally oriented thinking" provided no acceptable level of reliability. Results from the present and other studies indicate that the factorial structure of the TAS-20 may vary across samples. Whether factor structures different from the common three-factor structure are an exception in some mainly clinical populations or a common phenomenon outside student populations has still to be determined. For a further exploration of the factor structure of the TAS-20 in different populations, it would be important not only to test the fit of the common three-factor model, but also to consider other competing solutions like the models of the present study.

Assessing the applicability of the Taguchi design method to an interrill erosion study

NASA Astrophysics Data System (ADS)

Zhang, F. B.; Wang, Z. L.; Yang, M. Y.

2015-02-01

Full-factorial experimental designs have been used in soil erosion studies, but are time, cost and labor intensive, and sometimes they are impossible to conduct due to the increasing number of factors and their levels to consider. The Taguchi design is a simple, economical and efficient statistical tool that only uses a portion of the total possible factorial combinations to obtain the results of a study. Soil erosion studies that use the Taguchi design are scarce and no comparisons with full-factorial designs have been made. In this paper, a series of simulated rainfall experiments using a full-factorial design of five slope lengths (0.4, 0.8, 1.2, 1.6, and 2 m), five slope gradients (18%, 27%, 36%, 48%, and 58%), and five rainfall intensities (48, 62.4, 102, 149, and 170 mm h-1) were conducted. Validation of the applicability of a Taguchi design to interrill erosion experiments was achieved by extracting data from the full dataset according to a theoretical Taguchi design. The statistical parameters for the mean quasi-steady state erosion and runoff rates of each test, the optimum conditions for producing maximum erosion and runoff, and the main effect and percentage contribution of each factor obtained from the full-factorial and Taguchi designs were compared. Both designs generated almost identical results. Using the experimental data from the Taguchi design, it was possible to accurately predict the erosion and runoff rates under the conditions that had been excluded from the Taguchi design. All of the results obtained from analyzing the experimental data for both designs indicated that the Taguchi design could be applied to interrill erosion studies and could replace full-factorial designs. This would save time, labor and costs by generally reducing the number of tests to be conducted. Further work should test the applicability of the Taguchi design to a wider range of conditions.

Factorial validity and measurement equivalence of the Client Assessment of Treatment Scale for psychiatric inpatient care - a study in three European countries.

PubMed

Richardson, Michelle; Katsakou, Christina; Torres-González, Francisco; Onchev, George; Kallert, Thomas; Priebe, Stefan

2011-06-30

Patients' views of inpatient care need to be assessed for research and routine evaluation. For this a valid instrument is required. The Client Assessment of Treatment Scale (CAT) has been used in large scale international studies, but its psychometric properties have not been well established. The structural validity of the CAT was tested among involuntary inpatients with psychosis. Data from locations in three separate European countries (England, Spain and Bulgaria) were collected. The factorial validity was initially tested using single sample confirmatory factor analyses in each country. Subsequent multi-sample analyses were used to test for invariance of the factor loadings, and factor variances across the countries. Results provide good initial support for the factorial validity and invariance of the CAT scores. Future research is needed to cross-validate these findings and to generalise them to other countries, treatment settings, and patient populations. Copyright © 2011 Elsevier Ltd. All rights reserved.

Testing Nelder-Mead based repulsion algorithms for multiple roots of nonlinear systems via a two-level factorial design of experiments.

PubMed

Ramadas, Gisela C V; Rocha, Ana Maria A C; Fernandes, Edite M G P

2015-01-01

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

Cleaner production in the ammonia-soda industry: an ecological and economic study.

PubMed

Kasikowski, T; Buczkowski, R; Lemanowska, E

2004-12-01

Five methods to reduce the negative influence of soda ash factories on the natural environment are presented: 1. obtaining calcium-magnesium phosphates by treating the suspension from raw brine purification with orthophosphoric acid (H(3)PO(4)), 2. production of precipitated chalk from soda processing waste, 3. production of gypsum and semi-brine, 4. desulphurisation of fume gases from the factory power plant, 5. utilization of distiller waste. The tests, accomplished on a laboratory scale, showed the high efficiency of these methods. Economic analysis has proved that only four out of the five presented processes can have a positive financial effect on soda ash factories, as well as being well justified economically. The value of two of the innovations presented is confirmed by their implementation in factories.

[German adaptation of the "Activities-Specific Balance Confidence (ABC) scale" for the assessment of falls-related self-efficacy].

PubMed

Schott, Nadja

2008-12-01

The present study investigates the psychometric properties and the factorial structure of the German adaptation of the Activities-Specific Balance Confidence (ABC) scale (Powell & Myers, 1995) for the evaluation of falls-related self-efficacy in community-dwelling older adults. The German adaptation of the ABC using a forward-backward procedure was administered to 113 older adults (age 68.9+/-8.5 years). The following internationally accepted instruments were used for validation: The Short Form Health Survey SF 36, the Geriatric Depression Scale (GDS), the Trail Making Test and the Letter Number Sequencing Test, and motor tests (balance, strength, mobility). The internal consistency (0.91-0.95) as well as the test-retest reliability of the subscales was excellent (0.94-0.98). The correlation coefficients with the validation instruments ranged between 0.33 and 0.58. Significant differences in the ABC-D scores were found in older adults with and without falls. Older adults with a recent fall history scored lower on the ABC-D than older adults without a recent fall history. To conclude, the German version of the ABC has properties analogous to the original English version and is apparently useful in assessing falls-related self-efficacy.

Emerging photovoltaic module technologies at PVUSA: A five-year assessment

NASA Astrophysics Data System (ADS)

Townsend, Tim

1995-04-01

The Photovoltaics for Utility Scale Applications (PVUSA) project tests two types of photovoltaic systems: new modules fielded as 20-kW emerging module technology (EMT) arrays, and more mature technologies fielded as 20- to 500-kW turnkey utility scale (US) systems. This report summarizes experiences of the PVUSA project in operating the first six 20-kW EMT photovoltaic systems. Five systems are installed at Davis, California, and one at Kihei, Hawaii. Products selected for testing and demonstration were judged to have potential for significant technical advancement or reduction in manufacturing cost. Features leading to selection of each system and findings over the average 5 years of operation are compared in the report. Factory product qualification test experiences along with field acceptance test results are documented. Evaluation includes a broad range of performance parameters, including long-term efficiency, seasonal generation patterns, and maintenance. While some of the arrays have operated as well as any commercial system, others have fared poorly. Throughout the procurement and operation of these precommercial PV modules, PVUSA has provided feedback to vendors, critical for product improvement. The data and evaluations in this report will be of further benefit to manufacturers and provide general comparative information on a variety of technologies to researchers in utilities, government, and industry alike.

Factorial Structure of Rosenberg's Self-Esteem Scale among Crack-Cocaine Drug Users.

ERIC Educational Resources Information Center

Wang, Jichuan; Siegal, Harvey A.; Falck, Russell S.; Carlson, Robert G.

2001-01-01

Used nine different confirmatory factor analysis models to test the factorial structure of Rosenberg's (M. Rosenberg, 1965) self-esteem scale with a sample of 430 crack-cocaine users. Results partly support earlier research to show a single global self-esteem factor underlying responses to the Rosenberg scale, method effects associated with item…

Yo Puedo Leer: Un Programa Personalizado de Lectura en un Aula Primaria: Reporte de un Modelo Comprobado (I Can Read: A Personalized Reading Program in a Primary Classroom: A Report on a Verified Model).

ERIC Educational Resources Information Center

Mendenhall, Susie B.; Sledjeski, Stephen

This monograph discusses an investigation carried out in a school which has implemented an experimental reading program. Achievement, self-esteem, and social acceptance gains and their interrelations were investigated. Treatment groups (experimental and control) were the three independent variables providing a 2 x 2 x 2 factorial design. Data were…

Technical considerations to avoid delayed and non-union.

PubMed

McMillan, Tristan E; Johnstone, Alan J

2017-06-01

For many years intramedullary nails have been a well accepted and successful method of diaphyseal fracture fixation. However, delayed and non unions with this technique do still occur and are associated with significant patient morbidity. The reason for this can be multi-factorial. We discuss a number of technical considerations to maximise fracture reduction, fracture stability and fracture vascularity in order to achieve bony union. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Factor structure and invariance test of the alcohol use disorder identification test (AUDIT): Comparison and further validation in a U.S. and Philippines college student sample.

PubMed

Tuliao, Antover P; Landoy, Bernice Vania N; McChargue, Dennis E

2016-01-01

The Alcohol Use Disorder Identification Test's factor structure varies depending on population and culture. Because of this inconsistency, this article examined the factor structure of the test and conducted a factorial invariance test between a U.S. and a Philippines college sample. Confirmatory factor analyses indicated that a three-factor solution outperforms the one- and two-factor solution in both samples. Factorial invariance analyses further supports the confirmatory findings by showing that factor loadings were generally invariant across groups; however, item intercepts show non-invariance. Country differences between factors show that Filipino consumption factor mean scores were significantly lower than their U.S. counterparts.

Cross-cultural adaptation and psychometric evaluations of the Turkish version of Parkinson Fatigue Scale.

PubMed

Ozturk, Erhan Arif; Kocer, Bilge Gonenli; Umay, Ebru; Cakci, Aytul

2018-06-07

The objectives of the present study were to translate and cross-culturally adapt the English version of the Parkinson Fatigue Scale into Turkish, to evaluate its psychometric properties, and to compare them with that of other language versions. A total of 144 patients with idiopathic Parkinson disease were included in the study. The Turkish version of Parkinson Fatigue Scale was evaluated for data quality, scaling assumptions, acceptability, reliability, and validity. The questionnaire response rate was 100% for both test and retest. The percentage of missing data was zero for items, and the percentage of computable scores was full. Floor and ceiling effects were absent. The Parkinson Fatigue Scale provides an acceptable internal consistency (Cronbach's alpha was 0.974 for 1st test and 0.964 for a retest, and corrected item-to-total correlations were ranged from 0.715 to 0.906) and test-retest reliability (Cohen's kappa coefficients were ranged from 0.632 to 0.786 for individuals items, and intraclass correlation coefficient was 0.887 for the overall Parkinson Fatigue Scale Score). An exploratory factor analysis of the items revealed a single factor explaining 71.7% of variance. The goodness-of-fit statistics for the one-factorial confirmatory factor analysis were Tucker Lewis index = 0.961, comparative fit index = 0.971 and root mean square error of approximation = 0.077 for a single factor. The average Parkinson Fatigue Scale Score was correlated significantly with sociodemographic data, clinical characteristics and scores of rating scales. The Turkish version of the Parkinson Fatigue Scale seems to be culturally well adapted and have good psychometric properties. The scale can be used in further studies to assess the fatigue in patients with Parkinson's disease.

Health-related quality of life in young adults in education, employment, or training: development of the Japanese version of Pediatric Quality of Life Inventory (PedsQL) Generic Core Scales Young Adult Version.

PubMed

Kaneko, Mei; Sato, Iori; Soejima, Takafumi; Kamibeppu, Kiyoko

2014-09-01

The purpose of the study is to develop a Japanese version of the Pediatric Quality of Life Inventory (PedsQL) Generic Core Scales Young Adult Version (PedsQL-YA-J) and determine the feasibility, reliability, and validity of the scales. Translation equivalence and content validity were verified using back-translation and cognitive debriefing tests. A total of 428 young adults recruited from one university, two vocational schools, or five companies completed questionnaires. We determined questionnaire feasibility, internal consistency, and test-retest reliability; checked concurrent validity against the Center for Epidemiologic Studies Depression Scale (CES-D); determined convergent and discriminant validity with the Medical Outcome Study 36-item Short Form Health Survey (SF-36); described known-groups validity with regard to subjective symptoms, illness or injury requiring regular medical visits, and depression; and verified factorial validity. All scales were internally consistent (Cronbach's coefficient alpha = 0.77-0.86); test-retest reliability was acceptable (intraclass correlation coefficient = 0.57-0.69); and all scales were concurrently valid with depression (Pearson's correlation coefficient = 0.43-0.57). The scales convergent and discriminant validity with the SF-36 and CES-D were acceptable. Evaluation of known-groups validity confirmed that the Physical Functioning scale was sensitive for subjective symptoms, the Emotional Functioning scale for depression, and the Work/School Functioning scale for illness or injury requiring regular medical visits. Exploratory factor analysis found a six-factor structure consistent with the assumed structure (cumulative proportion = 57.0%). The PedsQL-YA-J is suitable for assessing health-related quality of life in young adults in education, employment, or training, and for clinical trials and epidemiological research.

Industrial Engineering Lifts Off at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Barth, Tim

1998-01-01

When the National Aeronautics and Space Administration (NASA) began the Space Shuttle Program, it did not have an established industrial engineering (IE) capability for several probable reasons. For example, it was easy for some managers to dismiss IE principles as being inapplicable at NASA's John F. Kennedy Space Center (KSC). When NASA was formed by the National Aeronautics and Space Act of 1958, most industrial engineers worked in more traditional factory environments. The primary emphasis early in the shuttle program, and during previous human space flight programs such as Mercury and Apollo, was on technical accomplishments. Industrial engineering is sometimes difficult to explain in NASA's highly technical culture. IE is different in many ways from other engineering disciplines because it is devoted to process management and improvement, rather than product design. Images of clipboards and stopwatches still come to the minds of many people when the term industrial engineering is mentioned. The discipline of IE has only recently begun to gain acceptance and understanding in NASA. From an IE perspective today, the facilities used for flight hardware processing at KSC are NASA's premier factories. The products of these factories are among the most spectacular in the world: safe and successful launches of shuttles and expendable vehicles that carry tremendous payloads into space.

Advanced Map For Real-Time Process Control

NASA Astrophysics Data System (ADS)

Shiobara, Yasuhisa; Matsudaira, Takayuki; Sashida, Yoshio; Chikuma, Makoto

1987-10-01

MAP, a communications protocol for factory automation proposed by General Motors [1], has been accepted by users throughout the world and is rapidly becoming a user standard. In fact, it is now a LAN standard for factory automation. MAP is intended to interconnect different devices, such as computers and programmable devices, made by different manufacturers, enabling them to exchange information. It is based on the OSI intercomputer com-munications protocol standard under development by the ISO. With progress and standardization, MAP is being investigated for application to process control fields other than factory automation [2]. The transmission response time of the network system and centralized management of data exchanged with various devices for distributed control are import-ant in the case of a real-time process control with programmable controllers, computers, and instruments connected to a LAN system. MAP/EPA and MINI MAP aim at reduced overhead in protocol processing and enhanced transmission response. If applied to real-time process control, a protocol based on point-to-point and request-response transactions limits throughput and transmission response. This paper describes an advanced MAP LAN system applied to real-time process control by adding a new data transmission control that performs multicasting communication voluntarily and periodically in the priority order of data to be exchanged.

From Danger and Motherhood to Health and Beauty: Health Advice for the Factory Girl in Early Twentieth-Century Britain1

PubMed Central

LONG, VICKY; MARLAND, HILARY

2015-01-01

A survey of government reports and the archives and journals of other agencies interested in industrial health in early twentieth-century Britain has led us to conclude that, in addition to apprehension about the potentially harmful impact of industrial work on the reproductive health of women, there was a great deal of interest in the health of young, unmarried girls in the workplace, particularly the factory. Adopting a broader time frame, we suggest that the First World War, with its emphasis on the reproductive health of women, was an anomalous experience in a broader trend which stressed the growing acceptability of women’s work within industry. Concern with girls’ health and welfare embraced hygiene, diet, exercise, recreation, fashion and beauty within and outside of the workplace, as well as the impact of the boredom and monotony associated with industrial work. The health problems of young women workers tended to be associated with behaviour and environment rather than biology, as were anxieties about the impact of work on morals, habits and character. Efforts to ensure that young female factory workers would be equipped to take their place as citizens and parents, we argue, often dovetailed rather than diverged with the ‘boy labour’ question. PMID:20481061

Vibration measurements of the Daniel K. Inouye Solar Telescope mount, Coudé rotator, and enclosure assemblies

NASA Astrophysics Data System (ADS)

McBride, William R.; McBride, Daniel R.

2016-08-01

The Daniel K. Inouye Solar Telescope (DKIST) will be the largest solar telescope in the world, with a 4-meter off-axis primary mirror and 16 meter rotating Coudé laboratory within the telescope pier. The off-axis design requires a mount similar to an 8-meter on-axis telescope. Both the telescope mount and the Coudé laboratory utilize a roller bearing technology in place of the more commonly used hydrostatic bearings. The telescope enclosure utilizes a crawler mechanism for the altitude axis. As these mechanisms have not previously been used in a telescope, understanding the vibration characteristics and the potential impact on the telescope image is important. This paper presents the methodology used to perform jitter measurements of the enclosure and the mount bearings and servo system in a high-noise environment utilizing seismic accelerometers and high dynamic-range data acquisition equipment, along with digital signal processing (DSP) techniques. Data acquisition and signal processing were implemented in MATLAB. In the factory acceptance testing of the telescope mount, multiple accelerometers were strategically located to capture the six axes-of-motion of the primary and secondary mirror dummies. The optical sensitivity analysis was used to map these mirror mount displacements and rotations into units of image motion on the focal plane. Similarly, tests were done with the Coudé rotator, treating the entire rotating instrument lab as a rigid body. Testing was performed by recording accelerometer data while the telescope control system performed tracking operations typical of various observing scenarios. The analysis of the accelerometer data utilized noise-averaging fast Fourier transform (FFT) routines, spectrograms, and periodograms. To achieve adequate dynamic range at frequencies as low as 3Hz, the use of special filters and advanced windowing functions were necessary. Numerous identical automated tests were compared to identify and select the data sets with the lowest level of external interference. Similar testing was performed on the telescope enclosure during the factory test campaign. The vibration of the enclosure altitude and azimuth mechanisms were characterized. This paper details jitter tests using accelerometers placed in locations that allowed the motion of the assemblies to be measured while the control system performed various moves typical of on-sky observations. The measurements were converted into the rigid body motion of the structures and mapped into image motion using the telescope's optical sensitivity analysis.

The Positive Emotions after Acute Coronary Events behavioral health intervention: Design, rationale, and preliminary feasibility of a factorial design study.

PubMed

Huffman, Jeffery C; Albanese, Ariana M; Campbell, Kirsti A; Celano, Christopher M; Millstein, Rachel A; Mastromauro, Carol A; Healy, Brian C; Chung, Wei-Jean; Januzzi, James L; Collins, Linda M; Park, Elyse R

2017-04-01

Positive psychological constructs, such as optimism, are associated with greater participation in cardiac health behaviors and improved cardiac outcomes. Positive psychology interventions, which target psychological well-being, may represent a promising approach to improving health behaviors in high-risk cardiac patients. However, no study has assessed whether a positive psychology intervention can promote physical activity following an acute coronary syndrome. In this article we will describe the methods of a novel factorial design study to aid the development of a positive psychology-based intervention for acute coronary syndrome patients and aim to provide preliminary feasibility data on study implementation. The Positive Emotions after Acute Coronary Events III study is an optimization study (planned N = 128), subsumed within a larger multiphase optimization strategy iterative treatment development project. The goal of Positive Emotions after Acute Coronary Events III is to identify the ideal components of a positive psychology-based intervention to improve post-acute coronary syndrome physical activity. Using a 2 × 2 × 2 factorial design, Positive Emotions after Acute Coronary Events III aims to: (1) evaluate the relative merits of using positive psychology exercises alone or combined with motivational interviewing, (2) assess whether weekly or daily positive psychology exercise completion is optimal, and (3) determine the utility of booster sessions. The study's primary outcome measure is moderate-to-vigorous physical activity at 16 weeks, measured via accelerometer. Secondary outcome measures include psychological, functional, and adherence-related behavioral outcomes, along with metrics of feasibility and acceptability. For the primary study outcome, we will use a mixed-effects model with a random intercept (to account for repeated measures) to assess the main effects of each component (inclusion of motivational interviewing in the exercises, duration of the intervention, and inclusion of booster sessions) from a full factorial model controlling for baseline activity. Similar analyses will be performed on self-report measures and objectively-measured medication adherence over 16 weeks. We hypothesize that the combined positive psychology and motivational interviewing intervention, weekly exercises, and booster sessions will be associated with superior physical activity. Thus far, 78 participants have enrolled, with 72% of all possible exercises fully completed by participants. The Positive Emotions after Acute Coronary Events III study will help to determine the optimal content, intensity, and duration of a positive psychology intervention in post-acute coronary syndrome patients prior to testing in a randomized trial. This study is novel in its use of a factorial design within the multiphase optimization strategy framework to optimize a behavioral intervention and the use of a positive psychology intervention to promote physical activity in high-risk cardiac patients.

Affective Beliefs Influence the Experience of Eating Meat

PubMed Central

Anderson, Eric C.; Barrett, Lisa Feldman

2016-01-01

People believe they experience the world objectively, but research continually demonstrates that beliefs influence perception. Emerging research indicates that beliefs influence the experience of eating. In three studies, we test whether beliefs about how animals are raised can influence the experience of eating meat. Samples of meat were paired with descriptions of animals raised on factory farms or raised on humane farms. Importantly, the meat samples in both conditions were identical. However, participants experienced the samples differently: meat paired with factory farm descriptions looked, smelled, and tasted less pleasant. Even basic properties of flavor were influenced: factory farmed samples tasted more salty and greasy. Finally, actual behavior was influenced: participants consumed less when samples were paired with factory farm descriptions. These findings demonstrate that the experience of eating is not determined solely by physical properties of stimuli—beliefs also shape experience. PMID:27556643

Sample Size Requirements and Study Duration for Testing Main Effects and Interactions in Completely Randomized Factorial Designs When Time to Event is the Outcome

PubMed Central

Moser, Barry Kurt; Halabi, Susan

2013-01-01

In this paper we develop the methodology for designing clinical trials with any factorial arrangement when the primary outcome is time to event. We provide a matrix formulation for calculating the sample size and study duration necessary to test any effect with a pre-specified type I error rate and power. Assuming that a time to event follows an exponential distribution, we describe the relationships between the effect size, the power, and the sample size. We present examples for illustration purposes. We provide a simulation study to verify the numerical calculations of the expected number of events and the duration of the trial. The change in the power produced by a reduced number of observations or by accruing no patients to certain factorial combinations is also described. PMID:25530661

Adapting Evaluations of Alternative Payment Models to a Changing Environment.

PubMed

Grannemann, Thomas W; Brown, Randall S

2018-04-01

To identify the most robust methods for evaluating alternative payment models (APMs) in the emerging health care delivery system environment. We assess the impact of widespread testing of alternative payment models on the ability to find credible comparison groups. We consider the applicability of factorial research designs for assessing the effects of these models. The widespread adoption of alternative payment models could effectively eliminate the possibility of comparing APM results with a "pure" control or comparison group unaffected by other interventions. In this new environment, factorial experiments have distinct advantages over the single-model experimental or quasi-experimental designs that have been the mainstay of recent tests of Medicare payment and delivery models. The best prospects for producing definitive evidence of the effects of payment incentives for APMs include fractional factorial experiments that systematically vary requirements and payment provisions within a payment model. © Health Research and Educational Trust.

Two cases of paraoccupational asthma due to toluene diisocyanate (TDI).

PubMed

De Zotti, R; Muran, A; Zambon, F

2000-12-01

Two cases of paraoccupational asthma caused by toluene diisocyanate (TDI) are reported. The first patient was a metal worker in a machine shop situated near a factory producing polyurethane foam. Symptoms at work were not explainable by any specific exposure to irritants or allergens in the work site. As the patient recalled previous occasional work in the adjacent polyurethane factory with accompanying worsening of respiratory symptoms, a specific inhalation (SIC) test was performed with TDI, which confirmed the diagnosis of TDI asthma. The second case was a woman working part time as a secretary in the offices of her son's factory for varnishing wooden chairs. TDI was present in the products used in the varnishing shed. The SIC test confirmed the diagnosis of TDI asthma, despite the fact that the patient's job did not present risk of exposure to the substance. In both patients, symptoms disappeared when further exposure was avoided. These two cases confirm that paraoccupational exposure to TDI must be considered when evaluating patients with asthma not mediated by immunoglobulin E. They also suggest the need for more prospective studies evaluating the health risk for the general population living near polyurethane factories or other firms that use TDI.

[Evoked potentials and psychometric tests in the diagnosis of subclinical neurological damage in a group of workers exposed to low concentrations of mercury vapor].

PubMed

Martínez Vázquez, C; Rodríguez Sáez, E; Gil Fernández, M; Torres Pombo, J; Rodríguez, M; Iglesias Groba, M T; Herves Beloso, C

1996-05-01

We study the effects of low concentrations of mercury vapour on the nervous system of a group of eleven workers of a chloroalkali plant exposed to it. Twenty-three non-exposed workers in the same factory were used as control group. We used clinical and analytic explorations, psychometric tests and evoked potentials to evaluate the subjects. The average Hg in urine of the exposed group was 41.74 micrograms/gr creatinine and the average of the non-exposed group as 9.71 mu/yr. In the exposed group the evoked potentials have found a slowing-down of conduction in all the nervous paths studied (optical, auditive and somatosensory) and in the latency of P300 wave, although this was not statistically significant compared to the control group. Of the psychometric test used, only Rey's Complex Figure Test showed deterioration in the visual memory subtest of the exposed group (p < 0.05) compared to the control group, although in Wechsler's digit span test lower scores were obtained which were close to being statistically significant comparing the averages of the two groups (0.05 < p < 0.051). Bearing in mind these results we think that the amounts of Hg in urine and TLV-TWA (50 micrograms/gr creatinine and 50 micrograms/m3 respectively) accepted by most authors as innocuous should be reduced.

Photovoltaic pilot projects in the European community

NASA Astrophysics Data System (ADS)

Treble, F. C.; Grassi, G.; Schnell, W.

The paper presents proposals received for the construction of photovoltaic pilot plants as part of the Commission of the European Communities' second 4-year solar energy R and D program. The proposed plants range from 30 to 300 kWp and cover a variety of applications including rural electrification, water pumping, desalination, dairy farming, factories, hospitals, schools and vacation centers. Fifteen projects will be accepted with a total generating capacity of 1 MWp, with preference given to those projects involving the development of new techniques, components and systems.

HIV vaccine acceptability among communities at risk: the impact of vaccine characteristics.

PubMed

Newman, Peter A; Duan, Naihua; Lee, Sung-Jae; Rudy, Ellen T; Seiden, Danielle S; Kakinami, Lisa; Cunningham, William E

2006-03-15

HIV vaccines offer the best long-term hope of controlling the AIDS pandemic; yet, the advent of HIV vaccines will not ensure their acceptability. We conducted a cross-sectional survey (n=143), incorporating conjoint analysis, to assess HIV vaccine acceptability among participants recruited using multi-site (n=9), venue-based sampling in Los Angeles. We used a fractional factorial experimental design to construct eight hypothetical HIV vaccines, each with seven dichotomous attributes. The acceptability of each vaccine was assessed individually and then averaged across participants. Next, the impact of each attribute on vaccine acceptability was estimated for each participant using ANOVA and then analyzed across participants. Acceptability of the eight hypothetical HIV vaccines ranged from 33.2 (S.D. 34.9) to 82.2 (S.D. 31.3) on a 0-100 scale; mean=60.0 (S.D. 21.9). Efficacy had the greatest impact on acceptability (22.7; CI: 18.5-27.1; p<0.0001), followed by cross-clade protection (12.5; CI: 8.7-16.3, p<0.0001), side effects (11.5; CI: 7.4-15.5; p<0.0001), and duration of protection (6.1; CI: 3.2-9.0; p<.0001). Route of administration, number of doses and cost were not significant. Low acceptability of "partial efficacy" vaccines may present obstacles to future HIV vaccine dissemination. Educational and social marketing interventions may be necessary to ensure broad HIV vaccine uptake.

The E Sibling Project – exploratory randomised controlled trial of an online multi-component psychoeducational intervention for siblings of individuals with first episode psychosis

PubMed Central

2013-01-01

Background Siblings of individuals with first episode psychosis are natural partners to promote service users’ recovery and are themselves vulnerable to mental ill health due to the negative impact of psychosis within the family. This study aims to develop and undertake a preliminary evaluation of the efficacy of an online multi-component psychoeducational intervention for siblings of individuals with first episode psychosis. The impetus for the intervention arose from siblings' expressed needs for peer support and information on psychosis, coping and management strategies for common symptoms and ways to promote recovery. Methods/Design The project design draws on the Medical Research Council framework for the design and evaluation of complex interventions. Mixed methods comprising collection of qualitative focus group data, systematic review and expert advisory group consultation are used to develop the theoretical basis for and design of the intervention. This protocol focuses on the modelling and piloting phase which uses a randomised controlled trial with factorial design to test the efficacy of the intervention. Outcome data on participants’ mental wellbeing, knowledge, perceived self-efficacy and experiences of caregiving will be assessed at baseline, at end of the intervention (10 weeks later) and at 10 week follow-up. In addition, a post-intervention semi-structured interview with 20% of the participants will explore their experiences and acceptability of the intervention. Discussion This multi-component online psychoeducational intervention aims to enhance siblings' knowledge about psychosis and their coping capacity, thus potentially improving their own mental wellbeing and promoting their contribution to service users’ recovery. The factorial design randomised controlled trial with a supplementary process evaluation using semi-structured interviews and usage-monitoring will collect preliminary evidence of efficacy, feasibility and acceptability, as well as feedback about the barriers and strategies to using such an innovative resource. The RCT will provide data for estimating the likely effect size of the intervention on outcomes for siblings and inform the development of a definitive future trial. Trial registration Trial registration: ISRCTN01416694 PMID:23622123

The E Sibling Project - exploratory randomised controlled trial of an online multi-component psychoeducational intervention for siblings of individuals with first episode psychosis.

PubMed

Sin, Jacqueline; Henderson, Claire; Pinfold, Vanessa; Norman, Ian

2013-04-26

Siblings of individuals with first episode psychosis are natural partners to promote service users' recovery and are themselves vulnerable to mental ill health due to the negative impact of psychosis within the family. This study aims to develop and undertake a preliminary evaluation of the efficacy of an online multi-component psychoeducational intervention for siblings of individuals with first episode psychosis. The impetus for the intervention arose from siblings' expressed needs for peer support and information on psychosis, coping and management strategies for common symptoms and ways to promote recovery. The project design draws on the Medical Research Council framework for the design and evaluation of complex interventions. Mixed methods comprising collection of qualitative focus group data, systematic review and expert advisory group consultation are used to develop the theoretical basis for and design of the intervention. This protocol focuses on the modelling and piloting phase which uses a randomised controlled trial with factorial design to test the efficacy of the intervention. Outcome data on participants' mental wellbeing, knowledge, perceived self-efficacy and experiences of caregiving will be assessed at baseline, at end of the intervention (10 weeks later) and at 10 week follow-up. In addition, a post-intervention semi-structured interview with 20% of the participants will explore their experiences and acceptability of the intervention. This multi-component online psychoeducational intervention aims to enhance siblings' knowledge about psychosis and their coping capacity, thus potentially improving their own mental wellbeing and promoting their contribution to service users' recovery. The factorial design randomised controlled trial with a supplementary process evaluation using semi-structured interviews and usage-monitoring will collect preliminary evidence of efficacy, feasibility and acceptability, as well as feedback about the barriers and strategies to using such an innovative resource. The RCT will provide data for estimating the likely effect size of the intervention on outcomes for siblings and inform the development of a definitive future trial. Trial registration: ISRCTN01416694.

Effects of fortified lysine on the amino acid profile and sensory qualities of deep-fried and dried noodles.

PubMed

Polpuech, C; Chavasit, V; Srichakwal, P; Paniangvait, P

2011-08-01

Lysine fortification of wheat flour has been used toward reducing protein energy malnutrition in developing countries. The feasibility of fortifying instant noodles with lysine was evaluated based on sensory qualities and the residual lysine content. Fifty grams of deep-fried and dried instant noodles were fortified with 0.23 and 0.21 g lysine, respectively. The production temperatures used for deep-frying were 165-175 degrees C and for drying, 80-105 degrees C; these are the temperatures used in the industrial production of both kinds of noodles. Lysine fortification was then performed at the local factories using the commercial production lines and packaging for both types of instant noodles. Both fortified and unfortified deep-fried and dried instant noodles were stored at 50 degrees C under fluorescent light for 2 and 4 months, respectively. The fortified products were tested for residual lysine content and sensory qualities as compared with unfortified noodles. The results show fortified products from the tested processing temperatures were all accepted. After storage, significant losses of lysine were not found in both types of noodles analysed. The lysine-fortified noodles had amino acid scores of 102% and 122%, respectively. After 2 months, the sensory quality of fortified deep-fried noodles was still acceptable; however, the dried noodles turned to an unacceptable dark colour. This study shows that it is feasible to fortify deep-fried instant noodles with lysine, though lysine fortification exhibited an undesirable colour in the dried instant noodles after storage.

Hearing Loss

MedlinePlus

... loud noise is a regular part of the working environment, such as farming, construction or factory work, can ... hearing tested. Consider regular hearing tests if you work in a noisy environment. Regular testing of your hearing can provide early ...

The historical development and basis of human factors guidelines for automated systems in aeronautical operations

NASA Technical Reports Server (NTRS)

Ciciora, J. A.; Leonard, S. D.; Johnson, N.; Amell, J.

1984-01-01

In order to derive general design guidelines for automated systems a study was conducted on the utilization and acceptance of existing automated systems as currently employed in several commercial fields. Four principal study area were investigated by means of structured interviews, and in some cases questionnaires. The study areas were aviation, a both scheduled airline and general commercial aviation; process control and factory applications; office automation; and automation in the power industry. The results of over eighty structured interviews were analyzed and responses categoried as various human factors issues for use by both designers and users of automated equipment. These guidelines address such items as general physical features of automated equipment; personnel orientation, acceptance, and training; and both personnel and system reliability.

Factorial Invariance of an Integrated Measure of Classroom Sense of Community in Face-to-Face and Online Courses

ERIC Educational Resources Information Center

Cho, YoonJung; Hathcoat, John D.; Bridges, Stacey L.; Mathew, Susan; Bang, Hyeyoung

2014-01-01

The aim of the present study was to develop a more integrated measure of classroom sense of community (SOC) while testing factorial invariance of the measurement structure across face-to-face and online courses. We incorporated two existing SOC measures to capture both context-specific and context-general characteristics of SOC and developed an…

Evidence of Factorial Variance of the Mayer-Salovey-Caruso Emotional Intelligence Test Across Schizophrenia and Normative Samples

PubMed Central

Eack, Shaun M.; Pogue-Geile, Michael F.; Greeno, Catherine G.; Keshavan, Matcheri S.

2009-01-01

The Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT) is a key measure of social cognition recommended by the MATRICS committee. While the psychometric properties of the MSCEIT appear strong, previous evidence suggested its factor structure may have shifted when applied to schizophrenia patients, posing important implications for cross-group comparisons. Using multi-group confirmatory factor analysis, we explicitly tested the factorial invariance of the MSCEIT across schizophrenia (n = 64) and two normative samples (n = 2,099 and 451). Results indicated that the factor structure of the MSCEIT was significantly different between the schizophrenia and normative samples. Implications for future research are discussed. PMID:19501486

Gum Arabic as a Cause of Occupational Allergy

PubMed Central

Viinanen, Arja; Salokannel, Maija; Lammintausta, Kaija

2011-01-01

Background. Gum arabic is a potential sensitizer in food industry. Methods. We examined 11 candy factory workers referred to examinations due to respiratory and skin symptoms paying attention to exposure and sensitization to gum arabic. Skin tests, pulmonary function tests, and respiratory provocation tests were carried out as indicated by the symptoms and findings. Results. Occupational asthma, caused by gum arabic was diagnosed in 4/11 candy factory workers and two of them had also occupational contact urticaria and one had occupational rhinitis. One of them had oral symptoms associated with ingestion of products containing gum arabic. Conclusions. Airborne exposure to gum arabic may cause sensitization leading to allergic rhinitis, asthma, and urticaria. PMID:21747872

[Styles of conflict management among nurses. Instrument validation].

PubMed

Francisco, M T; Clos, A C; dos Santos, I; Larrubia, E de O

1997-01-01

The present study has as an object the modalities of conflict administration adopted by nurses in professional praxis. Considering the Management Grid Theory (BLAKE & MOUNTON, 1978), the conflict can be solved in different levels of quality or even, not solved, influenced by the manager behavior model. It is intended to identify nurses managing styles in conflict administration, analyzing their interactions. A questionnaire composed with 25 items, in its majority of popular adagios which express the five basic models of the Management Grid, has been tested. The research was run at the Rio de Janeiro State University Pedro Ernesto University Hospital from June, 1996 to August, 1997, and descriptive method and check-list schedule type functional analysis technique have been used. The factorial analysis of items has showed an occurrence of eight interdependent factors which designing the following styles that have been adopted by nurses: confrontation, negotiation, facing, conciliation, manipulation, acceptance, submission and withdrawing. The authors recommend data collect instrument revalidation.

The effects of tones in noise on human annoyance and performance

NASA Astrophysics Data System (ADS)

Lee, Joonhee

Building mechanical equipment often generates prominent tones because most systems include rotating parts like fans and pumps. These tonal noises can cause unpleasant user experiences in spaces and, in turn, lead to increased complaints by building occupants. Currently, architectural engineers can apply the noise criteria guidelines in standards or publications to achieve acceptable noise conditions for assorted types of spaces. However, these criteria do not apply well if the noise contains perceptible tones. The annoyance thresholds experienced by the general population with regards to the degree of tones in noise is a significant piece of knowledge that has not been well-established. Thus, this dissertation addresses the relationship between human perception and noises with tones in the built environment. Four phases of subjective testing were conducted in an indoor acoustic testing chamber at the University of Nebraska to achieve the research objective. The results indicate that even the least prominent tones in noises can significantly decrease the cognitive performance of participants on a mentally demanding task. Factorial repeated-measures analysis of variance of test results have proven that tonality has a crucial influence on working memory capacity of subjects, whereas loudness levels alone did not. A multidimensional annoyance model, incorporating psycho-acoustical attributes of noise in addition to loudness and tonality, has been proposed as a more accurate annoyance model.

The factorial and discriminant validity of the German version of the Post-traumatic Growth Inventory in stroke patients.

PubMed

Mack, Julian; Herrberg, Marlene; Hetzel, Andreas; Wallesch, Claus Werner; Bengel, Jürgen; Schulz, Moritz; Rohde, Nathalie; Schönberger, Michael

2015-01-01

Post-traumatic growth (PTG) is the experience of positive changes that can follow a traumatic event. The current study examined the factorial as well as the discriminant validity of the German version of the Post-traumatic Growth Inventory (PTGI-G) in stroke patients. A total of 188 adult stroke patients (63.3% male; median age 69 years) completed the PTGI-G and the German version of the Hospital Anxiety and Depression Scale (HADS-D) at the end of their inpatient rehabilitation. Confirmatory factor analyses indicate an acceptable model fit of both the original five-factor solution as well as a second-order factor model of the PTGI-G (CFI > .95; RMSEA < .01). Small and non-significant correlations between the PTGI-G subscales and the depression scale of the HADS-D support the discriminant validity of the PTGI-G. The PTGI-G appears to be a valid tool in the context of stroke research.

Validation of the German version of the insomnia severity index in adolescents, young adults and adult workers: results from three cross-sectional studies.

PubMed

Gerber, Markus; Lang, Christin; Lemola, Sakari; Colledge, Flora; Kalak, Nadeem; Holsboer-Trachsler, Edith; Pühse, Uwe; Brand, Serge

2016-05-31

A variety of objective and subjective methods exist to assess insomnia. The Insomnia Severity Index (ISI) was developed to provide a brief self-report instrument useful to assess people's perception of sleep complaints. The ISI was developed in English, and has been translated into several languages including German. Surprisingly, the psychometric properties of the German version have not been evaluated, although the ISI is often used with German-speaking populations. The psychometric properties of the ISI are tested in three independent samples: 1475 adolescents, 862 university students, and 533 police and emergency response service officers. In all three studies, participants provide information about insomnia (ISI), sleep quality (Pittsburgh Sleep Quality Index), and psychological functioning (diverse instruments). Descriptive statistics, gender differences, homogeneity and internal consistency, convergent validity, and factorial validity (including measurement invariance across genders) are examined in each sample. The findings show that the German version of the ISI has generally acceptable psychometric properties and sufficient concurrent validity. Confirmatory factor analyses show that a 1-factor solution achieves good model fit. Furthermore, measurement invariance across gender is supported in all three samples. While the ISI has been widely used in German-speaking countries, this study is the first to provide empirical evidence that the German version of this instrument has good psychometric properties and satisfactory convergent and factorial validity across various age groups and both men and women. Thus, the German version of the ISI can be recommended as a brief screening measure in German-speaking populations.

Study recommends measures to reduce induced abortion among young women in the Republic of Korea.

PubMed

1994-01-01

A study supported by the Program in the Republic of Korea involved 500 unmarried female adolescents and young adults selected from three categories: (a) factory workers living in industry-affiliated housing who participated in the project's special information program; (b) entertainers and sex workers working in bars and similar enterprises; and (c) women who sought an induced abortion in hospitals or private clinics. The average age of the women in each group was 22 years, 23 years, and 24 years, respectively. Most of the women had 12 years of schooling or more, and reported that their ideal age to enter marriage was 25 years. Korean society is generally very traditional, but among the factory workers cohabitation by unmarried couples is quite common and is gaining social acceptance. Among the women who reported a previous unwanted pregnancy, 85% said that they had not used a contraceptive before. Among the sex workers, contraceptive use was 53%, but still 66% had had an unwanted pregnancy. Among the factory workers contraceptive prevalence was 21%, and 36% reported having had an unwanted pregnancy. Among those seeking an abortion, only 20% had been using a method at the time of conception with 15% reporting contraceptive failure. Previous abortion experience was highest among abortion seekers (76%), followed by sex workers (45%), and the factory workers (11%). An argument is made for legalization of abortion in the country given that most abortions take place under unsafe conditions. Sex education is also recommended in schools and making family planning services available to adolescents, particularly to single women working in the industrial sector. The results have been discussed with labor unions and workers' organizations.

Methods for the Identification of Aircraft Tubing of Plain Carbon Steel and Chromium-Molybdenum Steel

NASA Technical Reports Server (NTRS)

Mutchler, W H; Buzzard, R W

1930-01-01

The survey of the possibilities for distinguishing between plain carbon and chromium-molybdenum steel tubing included the Herbert pendulum hardness, magnetic, sparks, and chemical tests. The Herbert pendulum test has the disadvantages of all hardness tests in being limited to factory use and being applicable only to scale-free, normalized material. The small difference in the range of hardness values between plain carbon and chromium-molybdenum steels is likewise a disadvantage. The Rockwell hardness test, at present used in the industry for this purpose, is much more reliable. It may be concluded on the basis of the experiments performed that of all methods surveyed, spark testing appears to be, at present, the most suitable for factory use from the standpoint of speed, accuracy, nondestructiveness and reliability. It is also applicable for field use.

[Validation of the Schizophrenia Quality Of Life Scale (SQLS) to Measure Quality of Life in Patients Diagnosed With Schizophrenia in Colombia].

PubMed

Suárez, María Fernanda; Sánchez, Ricardo; Calvo, José Manuel

2013-09-01

To validate the SQLS scale in Colombian patients diagnosed with schizophrenia. The self-report scale was applied to 251 patients. Measures of test-retest reliability, internal consistency and correlation inter-scales with the SF-12 were made by applying the scale 2 days later in 28 patients, and 30 days later in 38; 50 patients filled-out the SF-12 scale to determine the concurrent validity. Three domains were found with all of them having Cronbach's alphas >0.7. The three factors model did not show adequate fit indexes. Test-retest evaluation showed satisfactory correlation values (>0.86). Sensitivity to change did not shown significant differences between the repeated measures. As regards concurrent validity, acceptable correlation values were found only in SF-12 domains related to mental health and functioning. The SQLS has a factorial structure consistent with previous reports, adequate internal consistency and temporal stability. However, a more detailed examination of some of these items is required, considering that the measurement of the construct does not appear to be adequate. Copyright © 2013 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Factorial Invariance of the Brief Symptom Inventory-18 (BSI-18) for Adults of Mexican Descent across Nativity Status, Language Format, and Gender

ERIC Educational Resources Information Center

Torres, Lucas; Miller, Matthew J.; Moore, Kelly M.

2013-01-01

The cultural equivalence of psychological outcome measures remains a major area of investigation. The current study sought to test the factor structure and factorial invariance of the Brief Symptom Inventory-18 (BSI-18) with a sample of adult individuals of Mexican descent (N = 923) across nativity status (U.S.- vs. foreign-born), language format…

Validity and Reliability of the 8-Item Work Limitations Questionnaire.

PubMed

Walker, Timothy J; Tullar, Jessica M; Diamond, Pamela M; Kohl, Harold W; Amick, Benjamin C

2017-12-01

Purpose To evaluate factorial validity, scale reliability, test-retest reliability, convergent validity, and discriminant validity of the 8-item Work Limitations Questionnaire (WLQ) among employees from a public university system. Methods A secondary analysis using de-identified data from employees who completed an annual Health Assessment between the years 2009-2015 tested research aims. Confirmatory factor analysis (CFA) (n = 10,165) tested the latent structure of the 8-item WLQ. Scale reliability was determined using a CFA-based approach while test-retest reliability was determined using the intraclass correlation coefficient. Convergent/discriminant validity was tested by evaluating relations between the 8-item WLQ with health/performance variables for convergent validity (health-related work performance, number of chronic conditions, and general health) and demographic variables for discriminant validity (gender and institution type). Results A 1-factor model with three correlated residuals demonstrated excellent model fit (CFI = 0.99, TLI = 0.99, RMSEA = 0.03, and SRMR = 0.01). The scale reliability was acceptable (0.69, 95% CI 0.68-0.70) and the test-retest reliability was very good (ICC = 0.78). Low-to-moderate associations were observed between the 8-item WLQ and the health/performance variables while weak associations were observed between the demographic variables. Conclusions The 8-item WLQ demonstrated sufficient reliability and validity among employees from a public university system. Results suggest the 8-item WLQ is a usable alternative for studies when the more comprehensive 25-item WLQ is not available.

Are the Insomnia Severity Index and Pittsburgh Sleep Quality Index valid outcome measures for Cognitive Behavioral Therapy for Insomnia? Inquiry from the perspective of response shifts and longitudinal measurement invariance in their Chinese versions.

PubMed

Chen, Po-Yi; Jan, Ya-Wen; Yang, Chien-Ming

2017-07-01

The purpose of this study was to examine whether the Insomnia Severity Index (ISI) and Pittsburgh Sleep Quality Index (PSQI) are valid outcome measures for Cognitive Behavioral Therapy for Insomnia (CBT-I). Specifically, we tested whether the factorial parameters of the ISI and the PSQI could remain invariant against CBT-I, which is a prerequisite to using their change scores as an unbiased measure of the treatment outcome of CBT-I. A clinical data set including scores on the Chinese versions of the ISI and the PSQI obtained from 114 insomnia patients prior to and after a 6-week CBT-I program in Taiwan was analyzed. A series of measurement invariance (MI) tests were conducted to compare the factorial parameters of the ISI and the PSQI before and after the CBT-I treatment program. Most factorial parameters of the ISI remained invariant after CBT-I. However, the factorial model of the PSQI changed after CBT-I treatment. An extra loading with three residual correlations was added into the factorial model after treatment. The partial strong invariance of the ISI supports that it is a valid outcome measure for CBT-I. In contrast, various changes in the factor model of the PSQI indicate that it may not be an appropriate outcome measure for CBT-I. Some possible causes for the changes of the constructs of the PSQI following CBT-I are discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Longitudinal factorial invariance of the PedsQL 4.0 Generic Core Scales child self-report Version: one year prospective evidence from the California State Children's Health Insurance Program (SCHIP).

PubMed

Varni, James W; Limbers, Christine A; Newman, Daniel A; Seid, Michael

2008-11-01

The measurement of health-related quality of life (HRQOL) in pediatric medicine and health services research has grown significantly over the past decade. The paradigm shift toward patient-reported outcomes (PROs) has provided the opportunity to emphasize the value and critical need for pediatric patient self-report. In order for changes in HRQOL/PRO outcomes to be meaningful over time, it is essential to demonstrate longitudinal factorial invariance. This study examined the longitudinal factor structure of the PedsQL 4.0 Generic Core Scales over a one-year period for child self-report ages 5-17 in 2,887 children from a statewide evaluation of the California State Children's Health Insurance Program (SCHIP) utilizing a structural equation modeling framework. Specifying four- and five-factor measurement models, longitudinal structural equation modeling was used to compare factor structures over a one-year interval on the PedsQL 4.0 Generic Core Scales. While the four-factor conceptually-derived measurement model for the PedsQL 4.0 Generic Core Scales produced an acceptable fit, the five-factor empirically-derived measurement model from the initial field test of the PedsQL 4.0 Generic Core Scales produced a marginally superior fit in comparison to the four-factor model. For the five-factor measurement model, the best fitting model, strict factorial invariance of the PedsQL 4.0 Generic Core Scales across the two measurement occasions was supported by the stability of the comparative fit index between the unconstrained and constrained models, and several additional indices of practical fit including the root mean squared error of approximation, the non-normed fit index, and the parsimony normed fit index. The findings support an equivalent factor structure on the PedsQL 4.0 Generic Core Scales over time. Based on these data, it can be concluded that over a one-year period children in our study interpreted items on the PedsQL 4.0 Generic Core Scales in a similar manner.

Elemental source attribution signatures for calcium ammonium nitrate (CAN) fertilizers used in homemade explosives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fraga, Carlos G.; Mitroshkov, Alexander V.; Mirjankar, Nikhil S.

Calcium ammonium nitrate (CAN) is a widely available fertilizer composed of ammonium nitrate mixed with some form of calcium carbonate such as limestone or dolomite. CAN is also frequently used to make homemade explosives. The potential of using elemental profiling and chemometrics to match both pristine and reprocessed CAN fertilizers to their factories for use in future forensic investigations was examined. Inductively coupled plasma-mass spectrometry (ICP-MS) analysis was performed on 64 elements in 125 samples from 11 CAN stocks from 6 different CAN factories. Fisher ratio, degree-of-class-separation, and partial least squares discriminant analysis (PLSDA) were used to develop a modelmore » using the concentrations of Na, V, Mn, Cu, Ga, Sr, Ba and U to classify a validation set of CAN samples into 5 factory groups; one group was two factories from the same fertilizer company. In terms of the pristine CAN samples, i.e., unadulterated prills, 64% of the test samples were matched to their correct factory group with zero false positives. The same PLSDA model was used to correctly match 100% of the CAN samples that were reprocessed by crushing and mixing the CAN with powdered sugar. In the case of crushed CAN samples mixed with aluminum powder, correct matches were made for zero to 100% of the samples depending on the factory the CAN originated. Remarkably, for one factory, 100% of the ammonium nitrate samples that were extracted from CAN using tap or bottled water were matched to the correct CAN factory group. Lastly, the water-insoluble (calcium carbonate) portions of CAN provided a greater degree of discrimination between factories than the water-soluble portions of CAN. In summary, this work illustrates that sourcing unadulterated CAN fertilizer can potentially be done with high frequency and high confidence using elemental profiling and chemometrics while the sourcing of reprocessed CAN is dependent on how much an adulterant alters the recovered elemental profile of CAN.« less

Industrial Internship and Entrepreneurship Competencies on Vocational High School Students

NASA Astrophysics Data System (ADS)

Wendi, H. F.; Kusumah, I. H.

2018-02-01

The purpose of the research is to explore the influence of internship and vocational skill to student’s entrepreneurship competencies. The research used ex post facto approach. Population in this research is all students of Vocational High School in Bandung, Indonesia. The sample of 40 respondents was determined by proportional random sampling technique. The data were collected by instrument questionnaire and test. Data analysis used descriptive statistics and multiple linear regression. The results show that almost half students have a low the competencies of an entrepreneur. The hypothesis testing shows many the influence of factory teaching has a positive and significant effect on the competencies of an entrepreneur. Similarly, vocational skills have positive influence and significant on the competencies of an entrepreneur. Respectively, the influence of factory teaching and vocational skills expertise collectively have the effect on the competencies of an entrepreneur. Therefore, the influence of factory teaching and vocational skills are effective to student’s entrepreneurship cap competencies.

Factorial and Item-Level Invariance of a Principal Perspectives Survey: German and U.S. Principals.

PubMed

Wang, Chuang; Hancock, Dawson R; Muller, Ulrich

This study examined the factorial and item-level invariance of a survey of principals' job satisfaction and perspectives about reasons and barriers to becoming a principal with a sample of US principals and another sample of German principals. Confirmatory factor analysis (CFA) and differential item functioning (DIF) analysis were employed at the test and item level, respectively. A single group CFA was conducted first, and the model was found to fit the data collected. The factorial invariance between the German and the US principals was tested through three steps: (a) configural invariance; (b) measurement invariance; and (c) structural invariance. The results suggest that the survey is a viable measure of principals' job satisfaction and perspectives about reasons and barriers to becoming a principal because principals from two different cultures shared a similar pattern on all three constructs. The DIF analysis further revealed that 22 out of the 28 items functioned similarly between German and US principals.

The Japanese Positron Factory

NASA Astrophysics Data System (ADS)

Okada, S.; Sunaga, H.; Kaneko, H.; Takizawa, H.; Kawasuso, A.; Yotsumoto, K.; Tanaka, R.

1999-06-01

The Positron Factory has been planned at Japan Atomic Energy Research Institute (JAERI). The factory is expected to produce linac-based monoenergetic positron beams having world-highest intensities of more than 1010e+/sec, which will be applied for R&D of materials science, biotechnology and basic physics & chemistry. In this article, results of the design studies are demonstrated for the following essential components of the facilities: 1) Conceptual design of a high-power electron linac with 100 MeV in beam energy and 100 kW in averaged beam power, 2) Performance tests of the RF window in the high-power klystron and of the electron beam window, 3) Development of a self-driven rotating electron-to-positron converter and the performance tests, 4) Proposal of multi-channel beam generation system for monoenergetic positrons, with a series of moderator assemblies based on a newly developed Monte Carlo simulation and the demonstrative experiment, 5) Proposal of highly efficient moderator structures, 6) Conceptual design of a local shield to suppress the surrounding radiation and activation levels.

Rank-based permutation approaches for non-parametric factorial designs.

PubMed

Umlauft, Maria; Konietschke, Frank; Pauly, Markus

2017-11-01

Inference methods for null hypotheses formulated in terms of distribution functions in general non-parametric factorial designs are studied. The methods can be applied to continuous, ordinal or even ordered categorical data in a unified way, and are based only on ranks. In this set-up Wald-type statistics and ANOVA-type statistics are the current state of the art. The first method is asymptotically exact but a rather liberal statistical testing procedure for small to moderate sample size, while the latter is only an approximation which does not possess the correct asymptotic α level under the null. To bridge these gaps, a novel permutation approach is proposed which can be seen as a flexible generalization of the Kruskal-Wallis test to all kinds of factorial designs with independent observations. It is proven that the permutation principle is asymptotically correct while keeping its finite exactness property when data are exchangeable. The results of extensive simulation studies foster these theoretical findings. A real data set exemplifies its applicability. © 2017 The British Psychological Society.

Response of furniture factory workers to work-related airborne allergens.

PubMed

Skórska, Czesława; Krysińska-Traczyk, Ewa; Milanowski, Janusz; Cholewa, Grazyna; Sitkowska, Jolanta; Góra, Anna; Dutkiewicz, Jacek

2002-01-01

The aim of this work was to determine the reactivity of furniture factory workers to microbial allergens associated with wood dust. Allergological examinations by skin and precipitin tests were performed in 48 workers employed in a factory producing furniture from fibreboards and chipboards, and in 32 healthy urban dwellers not exposed to organic dusts (referents). The skin test was performed by the intradermal method with the saline extracts of the cultures of 3 microbial species (Rahnella sp., Arthrobacter globiformis, Aspergillus fumigatus) associated with wood dust. Skin reactions were recorded after 20 minutes, 8 hours and 24 hours and graded 1-4, depending on the diameter of the reaction. The agar-gel test for the presence of precipitins in serum was performed with the extracts of 15 microbial isolates. The furniture factory workers showed a high skin response to the extracts of environmental microbes. The frequency of early grade 2 reactions (diameter 10 mm) to the extract of Rahnella sp. was 64.6% among furniture workers, being significantly higher (p < 0.001) compared to reference group (18.7%). High frequencies of grade 2 reactions in furniture workers were also found with the extracts of A. globiformis and A. fumigatus (52.1% and 62.5%, respectively). The frequencies of grade 2 delayed (after 8 h) and late (after 24 h) reactions to Rahnella sp. in furniture workers were non-specifically high (97.9%/93.7%) while the response rates to A. globiformis and A. fumigatus were much lower (10.4%/25.0%, and 4.2%/37.5%, respectively). In agar-gel test for detection of precipitins, in most cases very low percentages of positive reactions (0-2.1%) were noted in furniture factory workers. The only exception was a high percentage of positive reactions (27.1%) to the antigen of Pseudomonas maltophilia, which was significantly greater in furniture workers compared to the reference group (p < 0.01). The obtained results suggest that early allergic reactions to microorganisms associated with wood dust are common among workers of furniture industry, which may increase a potential risk of work-related disease in this occupational group.

Procedure for developing experimental designs for accelerated tests for service-life prediction. [for solar cell modules

NASA Technical Reports Server (NTRS)

Thomas, R. E.; Gaines, G. B.

1978-01-01

Recommended design procedures to reduce the complete factorial design by retaining information on anticipated important interaction effects, and by generally giving up information on unconditional main effects are discussed. A hypothetical photovoltaic module used in the test design is presented. Judgments were made of the relative importance of various environmental stresses such as UV radiation, abrasion, chemical attack, temperature, mechanical stress, relative humidity and voltage. Consideration is given to a complete factorial design and its graphical representation, elimination of selected test conditions, examination and improvement of an engineering design, and parametric study. The resulting design consists of a mix of conditional main effects and conditional interactions and represents a compromise between engineering and statistical requirements.

DOCLIB: a software library for document processing

NASA Astrophysics Data System (ADS)

Jaeger, Stefan; Zhu, Guangyu; Doermann, David; Chen, Kevin; Sampat, Summit

2006-01-01

Most researchers would agree that research in the field of document processing can benefit tremendously from a common software library through which institutions are able to develop and share research-related software and applications across academic, business, and government domains. However, despite several attempts in the past, the research community still lacks a widely-accepted standard software library for document processing. This paper describes a new library called DOCLIB, which tries to overcome the drawbacks of earlier approaches. Many of DOCLIB's features are unique either in themselves or in their combination with others, e.g. the factory concept for support of different image types, the juxtaposition of image data and metadata, or the add-on mechanism. We cherish the hope that DOCLIB serves the needs of researchers better than previous approaches and will readily be accepted by a larger group of scientists.

Factorial validity of the Movement Assessment Battery for Children-2 (age band 2).

PubMed

Wagner, Matthias Oliver; Kastner, Julia; Petermann, Franz; Bös, Klaus

2011-01-01

The Movement Assessment Battery for Children-2 (M-ABC-2) is one of the most commonly used tests for the diagnosis of specific developmental disorders of motor function (F82). The M-ABC-2 comprises eight subtests per age band (AB) that are assigned to three dimensions: manual dexterity, aiming and catching, and balance. However, while previous exploratory findings suggested the correctness of the assumption of factorial validity, there is no empirical evidence that the M-ABC-2 subtests allow for a valid reproduction of the postulated factorial structure. The purpose of this study was to empirically confirm the factorial validity of the M-ABC-2. The German normative sample of AB2 (7-10 years; N=323) was used as the study sample for the empirical analyses. Confirmatory factor analysis was used to verify the factorial validity of the M-ABC-2 (AB2). The incremental fit indices (χ2=28.675; df=17; Bollen-Stine p value=0.318; RMSEA=0.046 [0.011-0.075]; SRMR=0.038; CFI=0.960) provided evidence for the factorial validity of the M-ABC-2 (AB2). However, because of a lack of empirical verification for convergent and discriminant validity, there is still no evidence that F82 can be diagnosed using M-ABC-2 (AB2). Copyright © 2010 Elsevier Ltd. All rights reserved.

Teacher Topics.

ERIC Educational Resources Information Center

Chemecology, 1995

1995-01-01

Includes articles and classroom activities about chemicals in the body entitled: "Your Body's Chemical Factory,""Testing for Catalase Activity,""How Sweet It IS...,""Milking Calcium for All It's Worth," and "Testing for Starch in Plant Products." (MKR)

A distribution-free multi-factorial profiler for harvesting information from high-density screenings.

PubMed

Besseris, George J

2013-01-01

Data screening is an indispensable phase in initiating the scientific discovery process. Fractional factorial designs offer quick and economical options for engineering highly-dense structured datasets. Maximum information content is harvested when a selected fractional factorial scheme is driven to saturation while data gathering is suppressed to no replication. A novel multi-factorial profiler is presented that allows screening of saturated-unreplicated designs by decomposing the examined response to its constituent contributions. Partial effects are sliced off systematically from the investigated response to form individual contrasts using simple robust measures. By isolating each time the disturbance attributed solely to a single controlling factor, the Wilcoxon-Mann-Whitney rank stochastics are employed to assign significance. We demonstrate that the proposed profiler possesses its own self-checking mechanism for detecting a potential influence due to fluctuations attributed to the remaining unexplainable error. Main benefits of the method are: 1) easy to grasp, 2) well-explained test-power properties, 3) distribution-free, 4) sparsity-free, 5) calibration-free, 6) simulation-free, 7) easy to implement, and 8) expanded usability to any type and size of multi-factorial screening designs. The method is elucidated with a benchmarked profiling effort for a water filtration process.

Reducing Sun Exposure for Prevention of Skin Cancers: Factorial Invariance and Reliability of the Self-Efficacy Scale for Sun Protection

PubMed Central

Babbin, Steven F.; Yin, Hui-Qing; Rossi, Joseph S.; Redding, Colleen A.; Paiva, Andrea L.; Velicer, Wayne F.

2015-01-01

The Self-Efficacy Scale for Sun Protection consists of two correlated factors with three items each for Sunscreen Use and Avoidance. This study evaluated two crucial psychometric assumptions, factorial invariance and scale reliability, with a sample of adults (N = 1356) participating in a computer-tailored, population-based intervention study. A measure has factorial invariance when the model is the same across subgroups. Three levels of invariance were tested, from least to most restrictive: (1) Configural Invariance (nonzero factor loadings unconstrained); (2) Pattern Identity Invariance (equal factor loadings); and (3) Strong Factorial Invariance (equal factor loadings and measurement errors). Strong Factorial Invariance was a good fit for the model across seven grouping variables: age, education, ethnicity, gender, race, skin tone, and Stage of Change for Sun Protection. Internal consistency coefficient Alpha and factor rho scale reliability, respectively, were .84 and .86 for Sunscreen Use, .68 and .70 for Avoidance, and .78 and .78 for the global (total) scale. The psychometric evidence demonstrates strong empirical support that the scale is consistent, has internal validity, and can be used to assess population-based adult samples. PMID:26457203

A Distribution-Free Multi-Factorial Profiler for Harvesting Information from High-Density Screenings

PubMed Central

Besseris, George J.

2013-01-01

Data screening is an indispensable phase in initiating the scientific discovery process. Fractional factorial designs offer quick and economical options for engineering highly-dense structured datasets. Maximum information content is harvested when a selected fractional factorial scheme is driven to saturation while data gathering is suppressed to no replication. A novel multi-factorial profiler is presented that allows screening of saturated-unreplicated designs by decomposing the examined response to its constituent contributions. Partial effects are sliced off systematically from the investigated response to form individual contrasts using simple robust measures. By isolating each time the disturbance attributed solely to a single controlling factor, the Wilcoxon-Mann-Whitney rank stochastics are employed to assign significance. We demonstrate that the proposed profiler possesses its own self-checking mechanism for detecting a potential influence due to fluctuations attributed to the remaining unexplainable error. Main benefits of the method are: 1) easy to grasp, 2) well-explained test-power properties, 3) distribution-free, 4) sparsity-free, 5) calibration-free, 6) simulation-free, 7) easy to implement, and 8) expanded usability to any type and size of multi-factorial screening designs. The method is elucidated with a benchmarked profiling effort for a water filtration process. PMID:24009744

Biological monitoring as proficient assessment method in chronic exposure to irritating gases and vapors.

PubMed

Szász, Zsuzsánna; Abrám, Z; Szász, L; Moldovan, H; Demeter, Annamária

2013-01-01

Air pollution and its adverse health effect represent a global issue. Long term or permanent exposure at low doses of toxic material may increase the number of new appeared severe respiratory diseases and may aggravate most of the existing chronic cases. In the present study, the main toxic aerosols released by the greatest chemical factory in Transylvania were analyzed and their health impacts were measured. We have used in our trial biologic monitoring 1786 employees from a chemical factory in a transversal descriptive study. In the same time, we have noticed environmental determination of air quality and also, we have checked the health status and other 90 cases from a nonchemical factory. In this factory there are also pneumotrop harms. Results of our study give useful information regarding workers health status, with possibility to make pollution-medical condition association: there was no significant association between occurrence of decreased lung function tests and exposure of chemical irritants compared to the second investigated factory. Exposure to pneumotrope hazards imposes safeguards to protect health and biological monitoring has proven absolutely necessary to do so. Last but not least, lifestyle monitoring is to be effective.

The Dimensions of Facebook Addiction as Measured by Facebook Addiction Italian Questionnaire and Their Relationships with Individual Differences.

PubMed

Caci, Barbara; Cardaci, Maurizio; Scrima, Fabrizio; Tabacchi, Marco Elio

2017-04-01

The studies reported analyze the factorial structure of Facebook Addiction Italian Questionnaire (FAIQ), a variant of 20-item Young's Internet Addiction Test (IAT). In Study 1, we tested FAIQ psychometric properties using exploratory factor analysis (EFA). In Study 2, we performed a confirmatory factor analysis (CFA) to verify the FAIQ factorial structure identified through EFA. Results from CFA confirm the presence of a four-factor model accounting for 58 percent of total variance, plus a general higher order factor that best fits the data. Further relationships between FAIQ factor scores, personality, and Facebook usage have been explored.

CERTS Microgrid Laboratory Test Bed - PIER Final Project Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eto, Joseph H.; Eto, Joseph H.; Lasseter, Robert

2008-07-25

The objective of the CERTS Microgrid Laboratory Test Bed project was to enhance the ease of integrating small energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of small generating sources. The techniques comprising the CERTS Microgrid concept are: 1) a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation; 2) an approach to electrical protection within the microgrid that does not depend on highmore » fault currents; and 3) a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications. The techniques were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations, and finally through factory acceptance testing of individual microgrid components. The islanding and resychronization method met all Institute of Electrical and Electronics Engineers 1547 and power quality requirements. The electrical protections system was able to distinguish between normal and faulted operation. The controls were found to be robust and under all conditions, including difficult motor starts. The results from these test are expected to lead to additional testing of enhancements to the basic techniques at the test bed to improve the business case for microgrid technologies, as well to field demonstrations involving microgrids that involve one or mroe of the CERTS Microgrid concepts.« less

Commercialization of Medium Voltage HTS Triax TM Cable Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knoll, David

2012-12-31

The original project scope that was established in 2007 aimed to install a 1,700 meter (1.1 mile) medium voltage HTS Triax{TM} cable system into the utility grid in New Orleans, LA. In 2010, however, the utility partner withdrew from the project, so the 1,700 meter cable installation was cancelled and the scope of work was reduced. The work then concentrated on the specific barriers to commercialization of HTS cable technology. The modified scope included long-length HTS cable design and testing, high voltage factory test development, optimized cooling system development, and HTS cable life-cycle analysis. In 2012, Southwire again analyzed themore » market for HTS cables and deemed the near term market acceptance to be low. The scope of work was further reduced to the completion of tasks already started and to testing of the existing HTS cable system in Columbus, OH. The work completed under the project included: • Long-length cable modeling and analysis • HTS wire evaluation and testing • Cable testing for AC losses • Optimized cooling system design • Life cycle testing of the HTS cable in Columbus, OH • Project management. The 200 meter long HTS Triax{TM} cable in Columbus, OH was incorporated into the project under the initial scope changes as a test bed for life cycle testing as well as the site for an optimized HTS cable cooling system. The Columbus cable utilizes the HTS TriaxTM design, so it provided an economical tool for these of the project tasks.« less

Controls in new construction reactors-factory testing of the non-safety portion of the Lungmen nuclear power plant distributed control system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Y. S.; Dick, J. W.; Tetirick, C. W.

2006-07-01

The construction permit for Taipower's Lungmen Nuclear Units 1 and 2, two ABWR plants, was issued on March 17, 1999[1], The construction of these units is progressing actively at site. The digital I and C system supplied by GE, which is designated as the Distributed Control and Information System (DCIS) in this project, is being implemented primarily at one vendor facility. In order to ensure the reliability, safety and availability of the DCIS, it is required to comprehensively test the whole DCIS in factory. This article describes the test requirements and acceptance criteria for functional testing of the Non-Safety Distributedmore » Control and Information system (DCIS) for Taiwan Power's Lungmen Units 1 and 2 GE selected Invensys as the equipment supplier for this Non-Safety portion of DCIS. The DCIS system of the Lungmen Units is a physically distributed control system. Field transmitters are connected to hard I/O terminal inputs on the Invensys I/A system. Once the signal is digitized on FBMs (Field Bus Modules) in Remote Multiplexing Units (RMUs), the signal is passed into an integrated control software environment. Control is based on the concept of compounds and blocks where each compound is a logical collection of blocks that performs a control function. Each point identified by control compound and block can be individually used throughout the DCIS system by referencing its unique name. In the Lungmen Project control logic and HSI (Human System Interface) requirements are divided into individual process systems called MPLs (Master Parts List). Higher-level Plant Computer System (PCS) algorithms access control compounds and blocks in these MPLs to develop functions. The test requirements and acceptance criteria for the DCIS system of the Lungmen Project are divided into three general categories (see 1,2,3 below) of verification, which in turn are divided into several specific tests: 1. DCIS System Physical Checks a) RMU Test - To confirm that the hard I/O database is installed on the DCIS and is physically addressed correctly. Test process is injecting a signal at each DCIS hard I/O terminal boundary and verifying correct receipt on the DCIS. b) DCIS Network Stress Test - Confirms system viability under extreme high load conditions beyond the plant could ever experience. Load conditions include alarm showers on the DCIS system to emulate plant upsets. c) System Hardware Configuration Test - These are typical checks of the DCIS system hardware including fault reporting, redundancy, and normal computer functions. d) Performance Test - Test confirms high level hardware and system capability attributes such as control system time response, 'cold start' reboots, and processor loading e) Electromagnetic compatibility tests - To verify the electromagnetic viability of the system and individual components 2. Implementation of Plant Systems and Systems Integration a) MPL Logic Tests -To confirm control functions implemented to system logic performs as expected, and that parameters are passed correctly between system control schemes. b) Data Link (Gateway) Tests- To verify third party interfaces to the DCIS. c) Plant Computer System (PCS) Logic Tests- Tests to verify that higher-level PCS logic is correctly implemented, performs as expected, and parameters are passed correctly between PCS sub-systems and MPL systems. Included the PCS sub-systems, Safety Parameter Display System, Historian, Alarms, Maintenance monitoring etc. 3. Unique Third Party Interfacing and Integration into the DCIS The set of controls for Automatic Power Regulation, Feedwater, and Recirculation Flow are specific in that these systems are implemented on third party Triple Modular Redundant (TMR) hardware, which was connected to the DCIS and are tested via full simulation. The TMR system is supplied by GE Control Solutions on the Mark Vie platform. (authors)« less

Helical FOFO Snake for 6D Ionization Cooling of Muons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alexahin, Y.

2010-03-30

A channel for 6D ionization cooling of muons is described which consists of periodically inclined solenoids of alternating polarity, liquid hydrogen absorbers placed inside the solenoids and RF cavities between them. An important feature of such a channel (called Helical FOFO snake) is that it can cool simultaneously muons of both signs. Theoretical considerations as well as results of simulations with G4beamline are presented which show that a 200 MHz HFOFO snake has sufficient acceptance to be used for initial 6D cooling in muon colliders and neutrino factories.

Results from the HARP Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Catanesi, M. G.

2008-02-21

Hadron production is a key ingredient in many aspects of {nu} physics. Precise prediction of atmospheric {nu} fluxes, characterization of accelerator {nu} beams, quantification of {pi} production and capture for {nu}-factory designs, all of these would profit from hadron production measurements. HARP at the CERN PS was the first hadron production experiment designed on purpose to match all these requirements. It combines a large, full phase space acceptance with low systematic errors and high statistics. HARP was operated in the range from 3 GeV to 15 GeV. We briefly describe here the most recent results.

Responsive copolymers for enhanced petroleum recovery. Quarterly technical progress report, June 23--September 21, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, C.; Hester, R.

Summaries are given on the technical progress on three tasks of this project. Monomer and polymer synthesis discusses the preparation of 1(7-aminoheptyloxymethyl)naphthalene and poly(maleic anhydride-alt-ethyl vinyl ether). Task 2, Characterization of molecular structure, discusses terpolymer solution preparation, UV analysis, fluorescence analysis, low angle laser light scattering, and viscometry. The paper discusses the effects of hydrophobic groups, the effect of pH, the effect of electrolyte addition, and photophysical studies. Task 3, Solution properties, describes the factorial experimental design for characterizing polymer solutions by light scattering, the light scattering test model, orthogonal factorial test design, linear regression in coded space, confidence levelmore » for coded space test mode coefficients, coefficients of the real space test model, and surface analysis of the model equations.« less

Scanner qualification with IntenCD based reticle error correction

NASA Astrophysics Data System (ADS)

Elblinger, Yair; Finders, Jo; Demarteau, Marcel; Wismans, Onno; Minnaert Janssen, Ingrid; Duray, Frank; Ben Yishai, Michael; Mangan, Shmoolik; Cohen, Yaron; Parizat, Ziv; Attal, Shay; Polonsky, Netanel; Englard, Ilan

2010-03-01

Scanner introduction into the fab production environment is a challenging task. An efficient evaluation of scanner performance matrices during factory acceptance test (FAT) and later on during site acceptance test (SAT) is crucial for minimizing the cycle time for pre and post production-start activities. If done effectively, the matrices of base line performance established during the SAT are used as a reference for scanner performance and fleet matching monitoring and maintenance in the fab environment. Key elements which can influence the cycle time of the SAT, FAT and maintenance cycles are the imaging, process and mask characterizations involved with those cycles. Discrete mask measurement techniques are currently in use to create across-mask CDU maps. By subtracting these maps from their final wafer measurement CDU map counterparts, it is possible to assess the real scanner induced printed errors within certain limitations. The current discrete measurement methods are time consuming and some techniques also overlook mask based effects other than line width variations, such as transmission and phase variations, all of which influence the final printed CD variability. Applied Materials Aera2TM mask inspection tool with IntenCDTM technology can scan the mask at high speed, offer full mask coverage and accurate assessment of all masks induced source of errors simultaneously, making it beneficial for scanner qualifications and performance monitoring. In this paper we report on a study that was done to improve a scanner introduction and qualification process using the IntenCD application to map the mask induced CD non uniformity. We will present the results of six scanners in production and discuss the benefits of the new method.

Persuasion stage in adoption theory: a cognitive response-cognitive structure assessment of source credibility and tax-incentive effects on consumer decision making for residential solar systems. [Suburbs of Baltimore

DOE Office of Scientific and Technical Information (OSTI.GOV)

Batory, S.S.

1981-01-01

The research objective was to learn more about the consumer's acceptance or rejection process toward a major residential energy innovation, a solar-generated water heating system. An experiment was conducted that evaluated one aspect of solar's commercialization, the persuasion stage in new-product-adoption decision making. A test of source credibility and monetary incentive effects on the consumer's decision-making processes was carried out. The experiment contained two message sources: the Department of Energy (a high credibility source) and a homebuilder (a moderate credibility source), and three levels of incentives, a tax credit equal to 40% of the solar unit purchase price, a 20%more » tax credit, and no tax credit. Subjects were randomly assigned to either a control group or one of six experimental treatments in a 2 x 3 fixed-effects factorial design. Subjects were 226 adult homeowners drawn from the suburbs of Baltimore, Maryland. The research postulated and tested a process of acceptance or rejection of innovations which was based on a cognitive-response/cognitive-structure paradigm of decision making. This process is called the persuasion stage by adoption theorists. Cognitive responses, beliefs, attitudes, and behavioral measures were the dependent variables. Consumers were shown to confront or debate incoming information by comparing it to their existing cognitive structure. This comparison process generated cognitive responses which led to changes in beliefs, attitudes, and behavior toward the innovation. The findings confirm that the federal government's intervention in the marketplace is having a favorable effect on the adoption decision process toward solar-generated water heating.« less

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

Assessment of Tooth Wear Among Glass Factory Workers: WHO 2013 Oral Health Survey.

PubMed

Chaturvedi, Pulkit; Bhat, Nagesh; Asawa, Kailash; Tak, Mridula; Bapat, Salil; Gupta, Vivek Vardhan

2015-08-01

Glass factory workers are often exposed to the hazardous environment that leads to deleterious oral health and subsequently, general health. We planned to determine the effects of the particulates present in the milieu on the tooth wear among workers. To assess tooth wear among glass factory workers in Jaipur, Rajasthan, India. A descriptive cross-sectional survey was conducted among 936 glass workers in Jaipur, Rajasthan, India from January-June 2014. A survey proforma was designed for tooth wear evaluation with the help of WHO Oral Health Assessment form 2013 (for adults). Information regarding oral health practices, adverse habits and dietary habits, demographic details was gathered and clinical parameters were recorded. The Chi-square test, t-test, One-way Analysis of Variance and a Stepwise multiple linear regression analysis. The most prevalent form of erosion was enamel erosion (589, 62.93%) with few subjects of deeper dentinal erosion and the difference was statistically significant (p=0.001). Dental erosion was found to be higher among males compared to females. Years of experience and educational status were identified as best predictors for dental erosion. It was concluded that there was considerable evidence of dental erosion found among the factory workers. Due to ignorance on social, cultural and health aspects, professional approach with regular dental care services for detection of early symptoms and planning of preventive strategies is warranted.

An Empirical Study of Eight Nonparametric Tests in Hierarchical Regression.

ERIC Educational Resources Information Center

Harwell, Michael; Serlin, Ronald C.

When normality does not hold, nonparametric tests represent an important data-analytic alternative to parametric tests. However, the use of nonparametric tests in educational research has been limited by the absence of easily performed tests for complex experimental designs and analyses, such as factorial designs and multiple regression analyses,…

Playing a Videogame with a Sexualized Female Character Increases Adolescents' Rape Myth Acceptance and Tolerance Toward Sexual Harassment.

PubMed

Driesmans, Karolien; Vandenbosch, Laura; Eggermont, Steven

2015-04-01

Prior research has documented favorable effects of active and educational videogames among adolescents. However, research on potential negative effects of such games is limited. Scholars have called attention to games portraying sexualized female characters. The purpose of the current study was to experimentally investigate the effect of playing a videogame with a sexualized female character on adolescents' acceptance of rape myths and tolerance for sexual harassment. Fifty-seven secondary school pupils, 12-15 years of age, participated in a 2 (gender: boys versus girls)×2 (game character: nonsexualized versus sexualized female) factorial design experiment. Participants played a game for 15 minutes and were randomly assigned to one of the two game characters. Afterward, they completed established scales to assess rape myth acceptance and tolerance for sexual harassment. Analyses of variance showed greater acceptance of rape myths (P=0.039) and greater tolerance of sexual harassment (P=0.046) in adolescents who played with the sexualized woman compared with adolescents in the control condition. We did not find significant differences between boys and girls or any interaction effect between gender and game character. Findings suggest that gameplaying with a sexualized woman may increase adolescents' acceptance of rape myths and tolerance for sexual harassment. These findings highlight attention to the use of sexualized female game characters in (educational and active) videogames that target adolescents.

DEVELOPMENT AND VALIDATION OF 'SURE': A PATIENT REPORTED OUTCOME MEASURE (PROM) FOR RECOVERY FROM DRUG AND ALCOHOL DEPENDENCE.

PubMed

Neale, Joanne; Vitoratou, Silia; Finch, Emily; Lennon, Paul; Mitcheson, Luke; Panebianco, Daria; Rose, Diana; Strang, John; Wykes, Til; Marsden, John

2016-08-01

Patient Reported Outcome Measures (PROMs) assess health status and health-related quality of life from the patient/service user perspective. Our study aimed to: i. develop a PROM for recovery from drug and alcohol dependence that has good face and content validity, acceptability and usability for people in recovery; ii. evaluate the psychometric properties and factorial structure of the new PROM ('SURE'). Item development included Delphi groups, focus groups, and service user feedback on draft versions of the new measure. A 30-item beta version was completed by 575 service users (461 in person [IP] and 114 online [OL]). Analyses comprised rating scale evaluation, assessment of psychometric properties, factorial structure, and differential item functioning. The beta measure had good face and content validity. Nine items were removed due to low stability, low factor loading, low construct validity or high complexity. The remaining 21 items were re-scaled (Rasch model analyses). Exploratory and confirmatory factor analyses revealed 5 factors: substance use, material resources, outlook on life, self-care, and relationships. The MIMIC model indicated 95% metric invariance across the IP and OL samples, and 100% metric invariance for gender. Internal consistency and test-retest reliability were granted. The 5 factors correlated positively with the corresponding WHOQOL-BREF and ARC subscales and score differences between participant sub-groups confirmed discriminative validity. 'SURE' is a psychometrically valid, quick and easy-to-complete outcome measure, developed with unprecedented input from people in recovery. It can be used alongside, or instead of, existing outcome tools. Copyright © 2016 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Validation of the Physician Teaching Motivation Questionnaire (PTMQ).

PubMed

Dybowski, Christoph; Harendza, Sigrid

2015-10-02

Physicians play a major role as teachers in undergraduate medical education. Studies indicate that different forms and degrees of motivation can influence work performance in general and that teachers' motivation to teach can influence students' academic achievements in particular. Therefore, the aim of this study was to develop and to validate an instrument measuring teaching motivations in hospital-based physicians. We chose self-determination theory as a theoretical framework for item and scale development. It distinguishes between different dimensions of motivation depending on the amount of self-regulation and autonomy involved and its empirical evidence has been demonstrated in other areas of research. To validate the new instrument (PTMQ = Physician Teaching Motivation Questionnaire), we used data from a sample of 247 physicians from internal medicine and surgery at six German medical faculties. Structural equation modelling was conducted to confirm the factorial structure, correlation analyses and linear regressions were performed to examine concurrent and incremental validity. Structural equation modelling confirmed a good global fit for the factorial structure of the final instrument (RMSEA = .050, TLI = .957, SRMR = .055, CFI = .966). Cronbach's alphas indicated good internal consistencies for all scales (α = .75 - .89) except for the identified teaching motivation subscale with an acceptable internal consistency (α = .65). Tests of concurrent validity with global work motivation, perceived teaching competence, perceived teaching involvement and voluntariness of lesson allocation delivered theory-consistent results with slight deviations for some scales. Incremental validity over global work motivation in predicting perceived teaching involvement was also confirmed. Our results indicate that the PTMQ is a reliable, valid and therefore suitable instrument for assessing physicians' teaching motivation.

U.S. Coast Guard pollution abatement program - Two-stroke cycle outboard engine emissions

DOT National Transportation Integrated Search

1975-09-01

This report documents the results of emissions tests performed on three old and two new outboard engines. Tests of the emissions were made before and after water contact. Older engines were tested in as-received condition, tuned to factory specificat...

Process optimization for sensory characteristics of seriales (Flacourtia jangomas) ready-to-drink (RTD) beverage

NASA Astrophysics Data System (ADS)

Cimafranca, L.; Dizon, E.

2018-01-01

Seriales (Flacourtia jangomas) is an underutilized fruit in the Philippines. The processing of the fruit into a RTD beverage was standardized by statistical methods. Plackett-Burman Design (PB) was used to determine the most significant factors that affect the sensory characteristics of the product. Response surface methodology (RSM) was applied based on the factorial Central Composite Design (CCD) to determine the optimum conditions for the maximum sensory acceptability of the seriales RTD beverage. Results of the PB revealed that the most significant factors were blanching time, level of seriales and TSS level. With different levels of blanching time (0.5, 1.0, and 1.5 min.), seriales level (10, 20, 30 %) and TSS value (12, 15, 18ºBrix), the optimum region for sensory acceptability was perceived at 0.7 to 1.4 minutes blanching time, seriales level of not beyond 27 %, and TSS at any level.

Implications of HARP Results for the Energy of the Proton Driver for a Neutrino Factory and Muon Collider

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strait, J.; Mokhov, N.V.; Striganov, S.I.

2010-06-09

Cross-section data from the HARP experiment for pion production by protons from a tantalum target have been convoluted with the acceptance of the front-end channel for the proposed neutrino factory or muon collider and integrated over the full phase space measured by HARP, to determine the beam-energy dependence of the muon yield. This permits a determination of the optimal beam energy for the proton driver for these projects. The cross-section data are corrected for the beam-energy dependent 'amplification' due to the development of hadronic showers in a thick target. The conclusion is that, for constant beam power, the yield ismore » maximum for a beam energy of about 7 GeV, but it is within 10% of this maximum for 4 < T{sub beam} < 11 GeV, and within 20% of the maximum for T{sub beam} as low as 2 GeV. This result is insensitive to which of the two HARP groups results are used, and to which pion generator is used to compute the thick target effects.« less

A trial of production of the plant-derived high-value protein in a plant factory: photosynthetic photon fluxes affect the accumulation of recombinant miraculin in transgenic tomato fruits.

PubMed

Kato, Kazuhisa; Maruyama, Shinichiro; Hirai, Tadayoshi; Hiwasa-Tanase, Kyoko; Mizoguchi, Tsuyoshi; Goto, Eiji; Ezura, Hiroshi

2011-08-01

One of the ultimate goals of plant science is to test a hypothesis obtained by basic science and to apply it to agriculture and industry. A plant factory is one of the ideal systems for this trial. Environmental factors affect both plant yield and the accumulation of recombinant proteins for industrial applications within transgenic plants. However, there have been few reports studying plant productivity for recombinant protein in closed cultivation systems called plant factories. To investigate the effects of photosynthetic photon flux (PPF) on tomato fruit yield and the accumulation of recombinant miraculin, a taste-modifying glycoprotein, in transgenic tomato fruits, plants were cultivated at various PPFs from 100 to 400 (µmol m(-2) s(-)1) in a plant factory. Miraculin production per unit of energy used was highest at PPF100, although miraculin production per unit area was highest at PPF300. The commercial productivity of recombinant miraculin in transgenic tomato fruits largely depended on light conditions in the plant factory. Our trial will be useful to consider the trade-offs between the profits from production of high-value materials in plants and the costs of electricity.

Comparison of Grouping Schemes for Exposure to Total Dust in Cement Factories in Korea.

PubMed

Koh, Dong-Hee; Kim, Tae-Woo; Jang, Seung Hee; Ryu, Hyang-Woo; Park, Donguk

2015-08-01

The purpose of this study was to evaluate grouping schemes for exposure to total dust in cement industry workers using non-repeated measurement data. In total, 2370 total dust measurements taken from nine Portland cement factories in 1995-2009 were analyzed. Various grouping schemes were generated based on work process, job, factory, or average exposure. To characterize variance components of each grouping scheme, we developed mixed-effects models with a B-spline time trend incorporated as fixed effects and a grouping variable incorporated as a random effect. Using the estimated variance components, elasticity was calculated. To compare the prediction performances of different grouping schemes, 10-fold cross-validation tests were conducted, and root mean squared errors and pooled correlation coefficients were calculated for each grouping scheme. The five exposure groups created a posteriori by ranking job and factory combinations according to average dust exposure showed the best prediction performance and highest elasticity among various grouping schemes. Our findings suggest a grouping method based on ranking of job, and factory combinations would be the optimal choice in this population. Our grouping method may aid exposure assessment efforts in similar occupational settings, minimizing the misclassification of exposures. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Indoor air pollution evaluation with emphasize on HDI and biological assessment of HDA in the polyurethane factories.

PubMed

Mirmohammadi, Mirtaghi; Hakimi Ibrahim, M; Ahmad, Anees; Kadir, Mohd Omar Abdul; Mohammadyan, M; Mirashrafi, S B

2010-06-01

Today, many raw materials used in factories may have a dangerous effect on the physiological system of workers. One of them which is widely used in the polyurethane factories is diisocyanates. These compounds are widely used in surface coatings, polyurethane foams, adhesives, resins, elastomers, binders, and sealants. Exposure to diisocyanates causes irritation to the skin, mucous membranes, eyes, and respiratory tract. Hexamethylene diamine (HDA) is metabolite of hexamethylene diisocyanate (HDI). It is an excretory material by worker's urine who is exposed to HDI. Around 100 air samples were collected from five defined factories by midget impinger which contained dimethyl sulfoxide absorbent as a solvent and tryptamine as reagent. Samples were analyzed by high-performance liquid chromatography with EC\\UV detector using NIOSH 5522 method of sampling. Also, 50 urine samples collected from workers were also analyzed using William's biological analysis method. The concentration of HDI into all air samples were more than 88 microg/m(3), and they have shown high concentration of pollutant in the workplaces in comparison with NIOSH standard, and all of the workers' urine were contaminated by HDA. The correlation and regression test were used to obtain statistical model for HDI and HDA, which is useful for the prediction of diisocyanates pollution situation in the polyurethane factories.

How Do I Sample the Environment and Equipment?

NASA Astrophysics Data System (ADS)

Kornacki, Jeffrey L.

Food product contamination from the post-processing environment is likely the most frequent cause of contaminated processed food product recalls and a significant source of poisoning outbreaks, and shelf life problems in North America with processed Ready-To-Eat foods. Conditions exist for the growth of microorganisms in most food processing factories. Failure to clean and effectively sanitize a microbial growth niche can lead to biofilm formation. Biofilms may be orders of magnitude more resistant to destruction by sanitizers. Cells in some biofilms have been shown to be 1,000 times more resistant to destruction than those which are freely suspended. This has implications for cleaning, sanitizing, sampling, and training. Sampling the factory environment is one means of monitoring the efficacy of microbiological control as well as a powerful tool for in-factory contamination investigation. Many sampling techniques exist and are discussed. It is important to recognize the difference between cleaning (removal of soil) and sanitization (reduction of microbial populations). Knowing where, when, and how to sample, how many samples to take, and what to test for and how to interpret test information is critical in finding and preventing contamination.

[The Maugeri Stress Index: a questionnaire to assess work-related psychological stress].

PubMed

Giorgi, Ines; Baiardi, Paola; Tringali, Salvatore; Candura, Stefano Massimo; Gardinali, Francesco; Grignani, Elena; Bertolotti, Giorgio; Imbriani, Marcello

2011-01-01

The European directives concerning the evaluation of work-related stress were absorbed into Italian law by means of Legislative Decree No. 81 of 9 April 2008. To develop a new questionnaire to assess the impact of work-related psychological distress and to validate it by testing its factorial structure, its content, its construct and discriminant validity. After critically reviewing the literature, we generated an initial item set to identify the items to be used in a preliminary version of the questionnaire, and then used a focus group to test the comprehensibility of the items. The questionnaire was administered to 329 subjects working in state and private organisation and a small sample of 29 subjects complaining of vexation at work. The Maugeri Stress Index (MSI) is reliable (Cronbach alpha: 0.93). Factorial analysis indicated five factors: Well-being, Adaptation, Support, Irritability and Avoidance. The total and subscale scores were significantly different when comparing subjects with and without vexation at work. The MSI has a multi-factorial structure, good internal reliability and sufficient discriminant power.

Factorial structure of the 'ToM Storybooks': A test evaluating multiple components of Theory of Mind.

PubMed

Bulgarelli, Daniela; Testa, Silvia; Molina, Paola

2015-06-01

This study examined the factorial structure of the Theory of Mind (ToM) Storybooks, a comprehensive 93-item instrument tapping the five components in Wellman's model of ToM (emotion recognition, understanding of desire and beliefs, ability to distinguish between physical and mental entities, and awareness of the link between perception and knowledge). A sample of 681 three- to eight-year-old Italian children was divided into three age groups to assess whether factorial structure varied across different age ranges. Partial credit model analysis was applied to the data, leading to the empirical identification of 23 composite variables aggregating the ToM Storybooks items. Confirmatory factor analysis was then conducted on the composite variables, providing support for the theoretical model. There were partial differences in the specific composite variables making up the dimensions for each of the three age groups. A single test evaluating distinct dimensions of ToM is a valuable resource for clinical practice which may be used to define differential profiles for specific populations. © 2014 The British Psychological Society.

Validity of the Eating Attitude Test among Exercisers.

PubMed

Lane, Helen J; Lane, Andrew M; Matheson, Hilary

2004-12-01

Theory testing and construct measurement are inextricably linked. To date, no published research has looked at the factorial validity of an existing eating attitude inventory for use with exercisers. The Eating Attitude Test (EAT) is a 26-item measure that yields a single index of disordered eating attitudes. The original factor analysis showed three interrelated factors: Dieting behavior (13-items), oral control (7-items), and bulimia nervosa-food preoccupation (6-items). The primary purpose of the study was to examine the factorial validity of the EAT among a sample of exercisers. The second purpose was to investigate relationships between eating attitudes scores and selected psychological constructs. In stage one, 598 regular exercisers completed the EAT. Confirmatory factor analysis (CFA) was used to test the single-factor, a three-factor model, and a four-factor model, which distinguished bulimia from food pre-occupation. CFA of the single-factor model (RCFI = 0.66, RMSEA = 0.10), the three-factor-model (RCFI = 0.74; RMSEA = 0.09) showed poor model fit. There was marginal fit for the 4-factor model (RCFI = 0.91, RMSEA = 0.06). Results indicated five-items showed poor factor loadings. After these 5-items were discarded, the three models were re-analyzed. CFA results indicated that the single-factor model (RCFI = 0.76, RMSEA = 0.10) and three-factor model (RCFI = 0.82, RMSEA = 0.08) showed poor fit. CFA results for the four-factor model showed acceptable fit indices (RCFI = 0.98, RMSEA = 0.06). Stage two explored relationships between EAT scores, mood, self-esteem, and motivational indices toward exercise in terms of self-determination, enjoyment and competence. Correlation results indicated that depressed mood scores positively correlated with bulimia and dieting scores. Further, dieting was inversely related with self-determination toward exercising. Collectively, findings suggest that a 21-item four-factor model shows promising validity coefficients among exercise participants, and that future research is needed to investigate eating attitudes among samples of exercisers. Key PointsValidity of psychometric measures should be thoroughly investigated. Researchers should not assume that a scale validation on one sample will show the same validity coefficients in a different population.The Eating Attitude Test is a commonly used scale. The present study shows a revised 21-item scale was suitable for exercisers.Researchers using the Eating Attitude Test should use subscales of Dieting, Oral control, Food pre-occupation, and Bulimia.Future research should involve qualitative techniques and interview exercise participants to explore the nature of eating attitudes.

Lung function, atopy, specific hypersensitivity, and smoking of workers in the enzyme detergent industry over 11 years.

PubMed

Flood, D F; Blofeld, R E; Bruce, C F; Hewitt, J I; Juniper, C P; Roberts, D M

1985-01-01

A study of 2800 workers employed in three factories of the two major manufacturers of enzymatic products in the United Kingdom covering 11 years of operation from 1969 to 1980 showed that 2344 workers had sufficient lung function data to meet the operational criteria and these were analysed in three separate groups by factory locations. Spirometry and prick tests for specific skin reactions to standardised enzyme were performed at six monthly intervals for the first six years of the study and then annually. Factory enzyme dust and total dust measurements were made to determine the degree of dust exposure of the subjects. The lung function of the factory groups was analysed for the effects of working in the detergent industry, the degree of exposure to enzymes, skin prick test positivity to enzymes, atopicity, and smoking. The 4.5% of workers who had experienced respiratory effects from enzymes were analysed separately. Exposure to the enzyme allergen has had no significant long term effect on the lung function of the detergent workers. A higher proportion of atopics than non-atopics became skin test positive to the allergen and more smokers than non-smokers were sensitised. The overall lung function of detergent workers showed 39 ml/year loss in FEV1 on the 11 year longitudinal study and 51 ml/year loss on the lateral (cross sectional) analysis with better lung function in the south east than the north west of England. In the development of the methodology for the study several potential problems were discovered that could remain unrecognised in a cross sectional analysis performed in isolation.

Effects of Blanching and Natural Convection Solar Drying on Quality Characteristics of Red Pepper (Capsicum annuum L.)

PubMed Central

Kori, Francis K. K.

2017-01-01

The objective of this work was to determine the effects of blanching and two drying methods, open-sun drying and natural convection solar drying, on the quality characteristics of red pepper. A 2 × 3 factorial design with experimental factors as 2 drying methods (open-sun drying and use of solar dryer) and 3 levels of pepper blanching (unblanched, blanched in plain water, and blanched in 2% NaCl) was conducted. Dried pepper samples were analysed for chemical composition, microbial load, and consumer sensory acceptability. Blanching of pepper in 2% NaCl solution followed by drying in a natural convection solar dryer reduced drying time by 15 hours. Similarly, a combination of blanching and drying in the solar dryer improved microbial quality of dried pepper. However, blanching and drying processes resulted in reduction in nutrients such as vitamin C and minerals content of pepper. Blanching followed by drying in natural convection solar dryer had the highest consumer acceptability scores for colour and overall acceptability, while texture and aroma were not significantly (p > 0.05) affected by the different treatments. Therefore, natural convection solar dryer can be used to dry pepper with acceptable microbial and sensory qualities, as an alternative to open-sun drying. PMID:29082236

49 CFR 571.213 - Standard No. 213; Child restraint systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the initial pre-test position of the respective knee pivot point, measured along a horizontal line... test dummy, specified in S7, when a child restraint system is tested in accordance with S6.1. Factory... body of a seated anthropomorphic test dummy, excluding the thighs, that lies between the top of the...

49 CFR 571.213 - Standard No. 213; Child restraint systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the initial pre-test position of the respective knee pivot point, measured along a horizontal line... test dummy, specified in S7, when a child restraint system is tested in accordance with S6.1. Factory... body of a seated anthropomorphic test dummy, excluding the thighs, that lies between the top of the...

The Failed Metaphors of Testing.

ERIC Educational Resources Information Center

Jones, M. Gail; Hargrove, Tracy Y.; Jones, Brett D.

2003-01-01

An essay drawn from a book on the unintended effects of high-stakes tests claims that public images of student assessment are influenced significantly by the cultural symbols of the one-room schoolhouse, sports competition, the factory model, and Disney. (Author/MLF)

Psychometric validation of the French version of the Connor-Davidson Resilience Scale.

PubMed

Guihard, G; Deumier, L; Alliot-Licht, B; Bouton-Kelly, L; Michaut, C; Quilliot, F

2018-02-01

Resilience defines the ability to face adversity with positive outcomes. Different scales, including the 25-item Connor-Davidson Resilience Scale (CDRISC), have been elaborated in order to evaluate resilience among various populations. The evaluation of resilience in French populations was impossible until CDRISC was translated into French. In the present work, we aim to validate a French version of CDRISC (f-CDRISC). The survey was conducted at Nantes University. Both dental and medical students were eligible. The factor structure of f-CDRISC was determined and its replicability was tested on two sub-samples by exploratory factor analysis (EFA) and parallel analysis (PA). A third student sample was used for confirmatory factorial analysis (CFA). We collected 1210 responses. Four items did not reach acceptance thresholds for reliability and were discarded from the f-CDRISC. EFA and PA of the remaining 21 items highlighted a replicable 3-factor structure that was further confirmed by CFA. Resilience factors included "tolerance to negative affects", "tenacity" and "self-confidence". All factors displayed acceptable to good internal consistency. They were characterized by positive medium to strong correlations with the overall f-CDRISC Scale. Significant positive correlations were also observed between the resilience factors. The present work constitutes the first study devoted to a French adaptation of the CDRISC questionnaire. We present evidence showing that the f-CDRISC is a reliable tool for resilience evaluation in French speaking populations. Copyright © 2017 L'Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

A Persian version of the parental bonding instrument: factor structure and psychometric properties.

PubMed

Behzadi, Behnaz; Parker, Gordon

2015-02-28

The Parental Bonding Instrument (PBI) is a widely used self-report measure for quantifying key parenting styles as perceived by the child during its first 16 years. While its development study identified two key parental dimensions, subsequent studies have variably confirmed those two or argued for one or more additional parental constructs. We developed a Persian translation of the PBI and administered it to a sample of 340 high school students. The construct validity of the Persian PBI was examined by Exploratory Factor Analysis while Confirmatory Factor Analysis was used to identify the most adequate model. Analyses of the Persian PBI favored a four-factor model for both parental forms. The Persian PBI has a factorial structure consistent with constructs identified in western cultures, as well as high internal consistency and test-retest reliability. Multivariate analyses indicated significant differences between boys and girls across some factors. The PBI appears an acceptable and appropriate measure for quantifying parent-child bonding in Iranian samples. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Student ERI: Psychometric properties of a new brief measure of effort-reward imbalance among university students.

PubMed

Wege, Natalia; Li, Jian; Muth, Thomas; Angerer, Peter; Siegrist, Johannes

2017-03-01

Psychosocial stress among university students, particularly medical students, is considered a widely prevalent problem. There is a need for valid measurement of an adverse psychosocial stress environment in university settings. The aim of this study was to examine the psychometric properties of a newly developed short student version of the effort-reward imbalance (ERI) questionnaire in a sample of medical students. A cross-sectional survey with a self-administrated questionnaire containing three scales was conducted among 406 medical students. Item-total correlations and Cronbach's alpha were calculated to assess the internal consistency of the scales. Confirmatory factor analysis was applied to test factorial validity of the questionnaire structure. The student version of the ERI questionnaire provides acceptable psychometric properties. The Cronbach's alpha coefficients for effort, reward, and over-commitment were 0.67, 0.65, and 0.79, respectively. Confirmatory factor analysis displayed a satisfactory fit of the data structure with the theoretical concept (GFI>0.94). This student version of the ERI questionnaire provides a psychometrically tested tool for studies focussing on psychosocial environment in university settings. Further applications of this approach in other student groups are needed, in addition to prospective studies assessing associations with health outcomes. Copyright © 2017 Elsevier Inc. All rights reserved.

Mobile shearography in applications

NASA Astrophysics Data System (ADS)

Kalms, Michael

2007-09-01

Modern optical methods such as digital shearography have attracted interest not only for laboratory investigations but also for applications on the factory floor because they can be sensitive, accurate, non-tactile and non-destructive. Optical inspection and measurement systems are more and more used in the entire manufacturing process. Shearography as a coherent optical method has been widely accepted as a useful NDT tool. It is a robust interferometric method to determine locations with maximum stress on various material structures. However, limitations of this technique can be found in the bulky equipment components, the interpretation of the complex shearographic result images and a barely solvable challenge at the work with difficult surfaces like dark absorbing or bright reflecting materials. We report a mobile shearography system that was especially designed for investigations at aircraft constructions. The great advantage of this system is the adjusted balance of all single elements to a complete measurement procedure integrated in a handy body. Only with the arrangement of all involved parameters like loading, laser source, sensor unit and software, it is feasible to get optimal measurement results. This paper describes a complete mobile shearographic procedure including loading and image processing facilities for structural testing and flaw recognition on aircrafts. The mobile system was successfully tested, e.g. with the up-to-date EADS multi-role combat aircraft Eurofighter.

Development of Physical Activity-Related Parenting Practices Scales for Urban Chinese Parents of Preschoolers: Confirmatory Factor Analysis and Reliability.

PubMed

Suen, Yi-Nam; Cerin, Ester; Barnett, Anthony; Huang, Wendy Y J; Mellecker, Robin R

2017-09-01

Valid instruments of parenting practices related to children's physical activity (PA) are essential to understand how parents affect preschoolers' PA. This study developed and validated a questionnaire of PA-related parenting practices for Chinese-speaking parents of preschoolers in Hong Kong. Parents (n = 394) completed a questionnaire developed using findings from formative qualitative research and literature searches. Test-retest reliability was determined on a subsample (n = 61). Factorial validity was assessed using confirmatory factor analysis. Subscale internal consistency was determined. The scale of parenting practices encouraging PA comprised 2 latent factors: Modeling, structure and participatory engagement in PA (23 items), and Provision of appropriate places for child's PA (4 items). The scale of parenting practices discouraging PA scale encompassed 4 latent factors: Safety concern/overprotection (6 items), Psychological/behavioral control (5 items), Promoting inactivity (4 items), and Promoting screen time (2 items). Test-retest reliabilities were moderate to excellent (0.58 to 0.82), and internal subscale reliabilities were acceptable (0.63 to 0.89). We developed a theory-based questionnaire for assessing PA-related parenting practices among Chinese-speaking parents of Hong Kong preschoolers. While some items were context and culture specific, many were similar to those previously found in other populations, indicating a degree of construct generalizability across cultures.

Methyl trypsin loaded poly(D,L-lactide-coglycolide) nanoparticles for contact lens care.

PubMed

Jimenez, N; Galan, J; Vallet, A; Egea, M A; Garcia, M L

2010-03-01

The need of an enzymatic cleaner for soft contact lens care with an improved ocular safety and stability profile led us to evaluate the use of nanoparticles (NPs) of poly(D,L-lactide-coglycolide) (PLGA) and methyl trypsin (MT). NPs were prepared by double emulsion-solvent evaporation technique. A factorial design was performed to select the lactic acid proportion in the copolymer and conditions of the second sonication. The increment in proportion of lactic acid provided higher particle size results. When the time of second sonication was decreased, the entrapment efficiency (EE) increased. PLGA 50:50 NPs were chosen for further development since PLGA 50:50H NPs settled fast with different particle size in the sediment and PLGA 75:25 NPs led to form aggregates. The addition of glycerol to the NPs provided the highest EE of MT (>90%) while the addition of Tetronic 1304 promoted the fast release of enzyme initially and decreased the zeta potential (zeta) up to neutral values after gamma irradiation. NPs are expected to be effective as a lens care cleaner after 3 days or even longer with a very low quantity of enzyme released. Formulations showed an acceptable irritation ocular tolerance after in vitro HET-CAM test and in vivo Draize test. 2009 Wiley-Liss, Inc. and the American Pharmacists Association

Sample size requirements for separating out the effects of combination treatments: randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis.

PubMed

Wolbers, Marcel; Heemskerk, Dorothee; Chau, Tran Thi Hong; Yen, Nguyen Thi Bich; Caws, Maxine; Farrar, Jeremy; Day, Jeremy

2011-02-02

In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 x 2 factorial design. We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 x 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Current Controlled Trials ISRCTN61649292.

Occupational allergic rhinitis from guar gum.

PubMed

Kanerva, L; Tupasela, O; Jolanki, R; Vaheri, E; Estlander, T; Keskinen, H

1988-05-01

Three cases of allergic rhinitis from a vegetable gum, guar gum, have been detected. Two subjects were exposed to fine guar gum powder (Emco Gum 563, Meyhall Chemical AG, Switzerland), an insulator in rubber cables, when opening cables in a power cable laboratory. After 1-2 years' exposure the patients developed rhinitis. Scratch-chamber tests, nasal provocation tests, nasal eosinophilia and a RAST test proved their allergy. A third subject developed allergic rhinitis from another guar gum product (Meyproid 5306, Meyhall Chemical AG) after 2 years' exposure in a paper factory. A positive skin test and nasal provocation test confirmed the diagnosis. A fourth case of possible allergy to guar gum after exposure to Meyproid 5306 in a paper factory is also presented. No final diagnosis was reached in this case (in 1974). The present subjects, only one of whom was atopic, developed allergy within 2 years, although their exposure to guar gum was not especially heavy. Therefore, when handling guar, adequate ventilation facilities should be provided and protective clothing, including a respiratory mask, should be worn.

Factorial Structure of the Movement Assessment Battery for Children Test-Second Edition in Preschool Children.

PubMed

Psotta, Rudolf; Brom, Ondřej

2016-12-01

The Movement Assessment Battery for Children-Second Edition is one of the most frequently used tests for assessment of the fundamental motor skills in children. However, there is the question which sensorimotor functions are really captured by the tasks involved in the test for the preschool (3-6 years) children (age band 1). The aim of the study was to examine the factorial structure of the age band 1 test. Results of the testing by the age band 1 in a sample of three- to- six-year-old children (N = 399; 202 boys, 197 girls) were put to confirmatory factor analysis. The results of the study proved the three-specific factor structure of the age band 1. Thus, within the assessment of a child's overall motor proficiency, the motor competence profile including manual dexterity, aiming and catching, and balance abilities can be identified in three- to six-year-old children. © The Author(s) 2016.

Generalized Subset Designs in Analytical Chemistry.

PubMed

Surowiec, Izabella; Vikström, Ludvig; Hector, Gustaf; Johansson, Erik; Vikström, Conny; Trygg, Johan

2017-06-20

Design of experiments (DOE) is an established methodology in research, development, manufacturing, and production for screening, optimization, and robustness testing. Two-level fractional factorial designs remain the preferred approach due to high information content while keeping the number of experiments low. These types of designs, however, have never been extended to a generalized multilevel reduced design type that would be capable to include both qualitative and quantitative factors. In this Article we describe a novel generalized fractional factorial design. In addition, it also provides complementary and balanced subdesigns analogous to a fold-over in two-level reduced factorial designs. We demonstrate how this design type can be applied with good results in three different applications in analytical chemistry including (a) multivariate calibration using microwave resonance spectroscopy for the determination of water in tablets, (b) stability study in drug product development, and (c) representative sample selection in clinical studies. This demonstrates the potential of generalized fractional factorial designs to be applied in many other areas of analytical chemistry where representative, balanced, and complementary subsets are required, especially when a combination of quantitative and qualitative factors at multiple levels exists.

[From manual workshop to international standard maker: exploration on production standard of acupuncture needle by Chengjiang acupuncture school].

PubMed

Cheng, Jie; Cao, Yang; Xia, Youbing

2015-02-01

ABSTRACT The exploration course on production standard of acupuncture needle by Chengjiang acupuncture school is reviewed in this paper. After new China was established, acupuncture needle standard was unified by Mr. CHENG Dan-an, which guided Suzhou Hua Erfang (predecessor of Suzhou Medical Supplies Factory) to make the quality standards and testing methods of acupuncture needle and improved the production process to make the modern acupuncture needle. Based on this, Suzhou Medical Supplies Factory followed the time development pace, ac tively introduced new technology, carried out technological innovation, and constantly improved the level of production technology, as a result, it gradually developed into one of the world's largest acupuncture needle production suppliers. Meanwhile, after establishing China's first national standard on acupuncture needle (GB 2024-1980), the Suzhou Medical Supplies Factory took the lead to draft "ISO) 17218:2014 the disposable use asepsis acupuncture needle", which was officially published as an international standard. The Suzhou Medical Supplies Factory developed from a manual workshop to an international standard maker.

Assessment of Tooth Wear Among Glass Factory Workers: WHO 2013 Oral Health Survey

PubMed Central

Bhat, Nagesh; Asawa, Kailash; Tak, Mridula; Bapat, Salil; Gupta, Vivek Vardhan

2015-01-01

Background Glass factory workers are often exposed to the hazardous environment that leads to deleterious oral health and subsequently, general health. We planned to determine the effects of the particulates present in the milieu on the tooth wear among workers. Aim To assess tooth wear among glass factory workers in Jaipur, Rajasthan, India. Settings and Design A descriptive cross-sectional survey was conducted among 936 glass workers in Jaipur, Rajasthan, India from January-June 2014. Materials and Methods A survey proforma was designed for tooth wear evaluation with the help of WHO Oral Health Assessment form 2013 (for adults). Information regarding oral health practices, adverse habits and dietary habits, demographic details was gathered and clinical parameters were recorded. Statistical Analysis The Chi–square test, t–test, One-way Analysis of Variance and a Stepwise multiple linear regression analysis. Results The most prevalent form of erosion was enamel erosion (589, 62.93%) with few subjects of deeper dentinal erosion and the difference was statistically significant (p=0.001). Dental erosion was found to be higher among males compared to females. Years of experience and educational status were identified as best predictors for dental erosion. Conclusion It was concluded that there was considerable evidence of dental erosion found among the factory workers. Due to ignorance on social, cultural and health aspects, professional approach with regular dental care services for detection of early symptoms and planning of preventive strategies is warranted. PMID:26436050

Ergonomics improvements of the visual inspection process in a printed circuit assembly factory.

PubMed

Yeow, Paul H P; Sen, Rabindra Nath

2004-01-01

An ergonomics improvement study was conducted on the visual inspection process of a printed circuit assembly (PCA) factory. The process was studied through subjective assessment and direct observation. Three problems were identified: operators' eye problems, insufficient time for inspection and ineffective visual inspection. These problems caused a huge yearly rejection cost of US 298,240 dollars, poor quality, customer dissatisfaction and poor occupational health and safety. Ergonomics interventions were made to rectify the problems: reduced usage of a magnifying glass, the use of less glaring inspection templates, inspection of only electrically non-tested components and introduction of a visual inspection sequence. The interventions produced savings in rejection cost, reduced operators' eye strain, headaches and watery eyes, lowered the defect percentage at customers' sites and increased the factory's productivity and customer satisfaction.

Ubiquitous Robotic Technology for Smart Manufacturing System.

PubMed

Wang, Wenshan; Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

2016-01-01

As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods.

Ubiquitous Robotic Technology for Smart Manufacturing System

PubMed Central

Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

2016-01-01

As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods. PMID:27446206

Accomplishments of the heavy electron particle accelerator program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Stratakis, D.; Palmer, M.

The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy lepton colliders (HLCs) from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of νe (more » $$\\bar{ve}$$) and $$\\bar{vμ}$$ (νμ) beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components have been obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and the precise physics goals become apparent.« less

Muon Sources for Particle Physics - Accomplishments of the Muon Accelerator Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neuffer, D.; Stratakis, D.; Palmer, M.

The Muon Accelerator Program (MAP) completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of lepton colliders from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of νe (ν more » $$\\bar{e}$$) and ν $$\\bar{μ}$$) (ν μ) beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components were obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and clearly associated physics goals become apparent« less

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

Results of the Intelligence Test for Visually Impaired Children (ITVIC).

ERIC Educational Resources Information Center

Dekker, R.; And Others

1991-01-01

Statistical analyses of scores on subtests of the Intelligence Test for Visually Impaired Children were done for two groups of children, either with or without usable vision. Results suggest that the battery has differential factorial and predictive validity. (Author/DB)

Sharing Data between Mobile Devices, Connected Vehicles and Infrastructure Task 6: Prototype Acceptance Test Summary Report

DOT National Transportation Integrated Search

2017-10-30

The Task 6 Prototype Acceptance Test Summary Report summarizes the results of Acceptance Testing carried out at Battelle facilities in accordance with the Task 6 Acceptance Test Plan. The Acceptance Tests were designed to verify that the prototype sy...

3-(Bromomethyl)-2-chloro-4-(methylsulfonyl)- benzoic acid: a new cause of sensitiser induced occupational asthma, rhinitis and urticaria.

PubMed

Suojalehto, Hille; Karvala, Kirsi; Ahonen, Saana; Ylinen, Katriina; Airaksinen, Liisa; Suuronen, Katri; Suomela, Sari; Lindström, Irmeli

2018-04-01

3-(Bromomethyl)-2-chloro-4-(methylsulfonyl)-benzoic acid (BCMBA) has not previously been identified as a respiratory sensitiser. We detected two cases who presented respiratory and urticaria symptoms related to BCMBA and had positive skin prick tests to the agent. Subsequently, we conducted outbreak investigations at the BCMBA-producing factory and performed clinical examinations to confirm occupational diseases. The outbreak investigations included observations of work processes, assessment of exposure, a medical survey with a questionnaire and skin prick tests with 0.5% BCMBA water solution on 85 exposed workers and 9 unexposed workers. We used specific inhalation or nasal challenge and open skin application test to investigate BCMBA-related occupational asthma, rhinitis and contact urticaria. We identified nine workers with respiratory and/or skin symptoms and positive skin prick tests to BCMBA in a chemical factory. A survey among chemical factory workers indicated a BCMBA-related sensitisation rate of 8% among all exposed workers; the rate was highest (25%) among production workers in the production hall. Sensitisation was detected only in workers with the estimated highest exposure levels. Six cases of occupational asthma, rhinitis and/or contact urticaria caused by BCMBA were confirmed with challenge tests. Asthma-provoking doses in specific inhalation challenges were very low (0.03% or 0.3% BCMBA in lactose). We identified a new low molecular weight agent causing occupational asthma, rhinitis and contact urticaria. A typical clinical picture of allergic diseases and positive skin prick tests suggest underlying IgE-mediated disease mechanisms. Stringent exposure control measures are needed in order to prevent BCMBA-related diseases. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The behavioral regulation in sport questionnaire (BRSQ): instrument development and initial validity evidence.

PubMed

Lonsdale, Chris; Hodge, Ken; Rose, Elaine A

2008-06-01

The purpose of the four studies described in this article was to develop and test a new measure of competitive sport participants' intrinsic motivation, extrinsic motivation, and amotivation (self-determination theory; Deci & Ryan, 1985). The items for the new measure, named the Behavioral Regulation in Sport Questionnaire (BRSQ), were constructed using interviews, expert review, and pilot testing. Analyses supported the internal consistency, test-retest reliability, and factorial validity of the BRSQ scores. Nomological validity evidence was also supportive, as BRSQ subscale scores were correlated in the expected pattern with scores derived from measures of motivational consequences. When directly compared with scores derived from the Sport Motivation Scale (SMS; Pelletier, Fortier, Vallerand, Tuson, & Blais, 1995) and a revised version of that questionnaire (SMS-6; Mallett, Kawabata, Newcombe, Otero-Forero, & Jackson, 2007), BRSQ scores demonstrated equal or superior reliability and factorial validity as well as better nomological validity.

Rural Clinician Scarcity and Job Preferences of Doctors and Nurses in India: A Discrete Choice Experiment

PubMed Central

Rao, Krishna D.; Ryan, Mandy; Shroff, Zubin; Vujicic, Marko; Ramani, Sudha; Berman, Peter

2013-01-01

The scarcity of rural doctors has undermined the ability of health systems in low and middle-income countries like India to provide quality services to rural populations. This study examines job preferences of doctors and nurses to inform what works in terms of rural recruitment strategies. Job acceptance of different strategies was compared to identify policy options for increasing the availability of clinical providers in rural areas. In 2010 a Discrete Choice Experiment was conducted in India. The study sample included final year medical and nursing students, and in-service doctors and nurses serving at Primary Health Centers. Eight job attributes were identified and a D-efficient fractional factorial design was used to construct pairs of job choices. Respondent acceptance of job choices was analyzed using multi-level logistic regression. Location mattered; jobs in areas offering urban amenities had a high likelihood of being accepted. Higher salary had small effect on doctor, but large effect on nurse, acceptance of rural jobs. At five times current salary levels, 13% (31%) of medical students (doctors) were willing to accept rural jobs. At half this level, 61% (52%) of nursing students (nurses) accepted a rural job. The strategy of reserving seats for specialist training in exchange for rural service had a large effect on job acceptance among doctors, nurses and nursing students. For doctors and nurses, properly staffed and equipped health facilities, and housing had small effects on job acceptance. Rural upbringing was not associated with rural job acceptance. Incentivizing doctors for rural service is expensive. A broader strategy of substantial salary increases with improved living, working environment, and education incentives is necessary. For both doctors and nurses, the usual strategies of moderate salary increases, good facility infrastructure, and housing will not be effective. Non-physician clinicians like nurse-practitioners offer an affordable alternative for delivering rural health care. PMID:24376621

Optimizing a positive psychology intervention to promote health behaviors following an acute coronary syndrome: The Positive Emotions after Acute Coronary Events-III (PEACE-III) randomized factorial trial.

PubMed

Celano, Christopher M; Albanese, Ariana M; Millstein, Rachel A; Mastromauro, Carol A; Chung, Wei-Jean; Campbell, Kirsti A; Legler, Sean R; Park, Elyse R; Healy, Brian C; Collins, Linda M; Januzzi, James L; Huffman, Jeff C

2018-04-05

Despite the clear benefits of physical activity and related behaviors on prognosis, most patients suffering an acute coronary syndrome (ACS) remain nonadherent to these behaviors. Deficits in positive psychological constructs (e.g., optimism) are linked to reduced participation in health behaviors, supporting the potential utility of a positive psychology (PP)-based intervention in post-ACS patients. Accordingly, we aimed to identify optimal components of a PP-based intervention to promote post-ACS physical activity. As part of a multiphase optimization strategy, we completed a randomized factorial trial with eight conditions in 128 post-ACS patients to efficiently identify best-performing intervention components. All participants received a PP-based intervention, with conditions varying in duration (presence/absence of booster sessions), intensity (weekly/daily PP exercises), and content (PP alone or combined with motivational interviewing [MI]), allowing three concurrent comparisons within the trial. Study aims included assessments of the overall feasibility, acceptability, and impact of the intervention, along with the primary aim of determining which components were associated with objectively-measured physical activity and self-reported health behavior adherence at 16 weeks, assessed using longitudinal models. The intervention was well-accepted and associated with substantial improvements in behavioral and psychological outcomes. Booster sessions were associated with greater activity to a nearly significant degree (β=8.58, 95% confidence interval= -0.49-17.65, effect size difference=.43; p=.064), MI was associated with overall adherence (β=0.95, 95% confidence interval=0.02-1.87, effect size difference=.39; p=.044), and weekly exercise completion was generally superior to daily. These findings will enable optimization of the PP-based intervention in preparation for a well-powered controlled trial. ClinicalTrials.gov identifier: NCT02754895.

Particulate matters collected from ceramic factories in Lampang Province affecting rat lungs.

PubMed

Fongmoon, Duriya; Pongnikorn, Surathat; Chaisena, Aphiruk; Iamsaard, Sitthichai

2014-01-01

Lung cancer ranks as the fifth largest of all cancer cases in Thailand. However, it is the first leading cancer in the northern part of Thailand (data from 2003-2007). There are several predisposing causes that lead to lung cancer and one important inducement is particulate matters (PMs). Lampang Province in Thailand is famous for the ceramic industry, where there are over 200 ceramic industrial factories. PMs are produced during the ceramic manufacturing process and spread throughout all of the working areas. It is very possible that workers could directly inhale PM-contaminated air during working hours. This study focuses on the toxic effects of PMs collected from ceramic factories on genes and lungs of rats. PMs collected from six ceramic factories in Lampang Province were extracted using dimethyl sulfoxide (DMSO). The inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) were used to analyze the chemical elements at lower and higher concentrations, respectively. Then, the toxicity of PMs on the genes was examined by the Ames test, and subsequently, the effect of PMs on DNA was examined by quantifying the amount of 8-hydroxy-2'-deoxyguanosine (8-OHdG). Finally, the toxicity of the PMs on rat's lungs was examined by histology. As chemical elements of lower concentrations, cadmium, chromium, nickel, copper, and lead were detected by ICP-MS. As chemical elements of higher concentrations, manganese, magnesium, zinc, iron, potassium, calcium, and sodium were detected by ICP-OES. No mutagenicity in Salmonella typhimurium was found in the PM extracts from all six factories by utilizing the Ames test. In the histological study, the reduction in spaces of alveolar ducts and sacs, and terminal bronchioles, the thickening of interstitial connective tissues were noted by PM extracts in high amounts (100 and 350 µg). Female rats were more sensitive to PM extracts than males in terms of their pulmonary damages. PMs were not mutagenic to S. typhimurium but can damage the lung tissue of rats.

Development and validation of the Cancer Exercise Stereotypes Scale.

PubMed

Falzon, Charlène; Sabiston, Catherine; Bergamaschi, Alessandro; Corrion, Karine; Chalabaev, Aïna; D'Arripe-Longueville, Fabienne

2014-01-01

The objective of this study was to develop and validate a French-language questionnaire measuring stereotypes related to exercise in cancer patients: The Cancer Exercise Stereotypes Scale (CESS). Four successive steps were carried out with 806 participants. First, a preliminary version was developed on the basis of the relevant literature and qualitative interviews. A test of clarity then led to the reformulation of six of the 30 items. Second, based on the modification indices of the first confirmatory factorial analysis, 11 of the 30 initial items were deleted. A new factorial structure analysis showed a good fit and validated a 19-item instrument with five subscales. Third, the stability of the instrument was tested over time. Last, tests of construct validity were conducted to examine convergent validity and discriminant validity. The French-language CESS appears to have good psychometric qualities and can be used to test theoretical tenets and inform intervention strategies on ways to foster exercise in cancer patients.

Factorial Invariance of Woodcock-Johnson III Scores for African Americans and Caucasian Americans

ERIC Educational Resources Information Center

Edwards, Oliver W.; Oakland, Thomas D.

2006-01-01

Bias in testing has been of interest to psychologists and other test users since the origin of testing. New or revised tests often are subject to analyses that help examine the degree of bias in reference to group membership based on gender, language use, and race/ethnicity. The pervasive use of intelligence test data when making critical and, at…

Robust control of burst suppression for medical coma

NASA Astrophysics Data System (ADS)

Westover, M. Brandon; Kim, Seong-Eun; Ching, ShiNung; Purdon, Patrick L.; Brown, Emery N.

2015-08-01

Objective. Medical coma is an anesthetic-induced state of brain inactivation, manifest in the electroencephalogram by burst suppression. Feedback control can be used to regulate burst suppression, however, previous designs have not been robust. Robust control design is critical under real-world operating conditions, subject to substantial pharmacokinetic and pharmacodynamic parameter uncertainty and unpredictable external disturbances. We sought to develop a robust closed-loop anesthesia delivery (CLAD) system to control medical coma. Approach. We developed a robust CLAD system to control the burst suppression probability (BSP). We developed a novel BSP tracking algorithm based on realistic models of propofol pharmacokinetics and pharmacodynamics. We also developed a practical method for estimating patient-specific pharmacodynamics parameters. Finally, we synthesized a robust proportional integral controller. Using a factorial design spanning patient age, mass, height, and gender, we tested whether the system performed within clinically acceptable limits. Throughout all experiments we subjected the system to disturbances, simulating treatment of refractory status epilepticus in a real-world intensive care unit environment. Main results. In 5400 simulations, CLAD behavior remained within specifications. Transient behavior after a step in target BSP from 0.2 to 0.8 exhibited a rise time (the median (min, max)) of 1.4 [1.1, 1.9] min; settling time, 7.8 [4.2, 9.0] min; and percent overshoot of 9.6 [2.3, 10.8]%. Under steady state conditions the CLAD system exhibited a median error of 0.1 [-0.5, 0.9]%; inaccuracy of 1.8 [0.9, 3.4]%; oscillation index of 1.8 [0.9, 3.4]%; and maximum instantaneous propofol dose of 4.3 [2.1, 10.5] mg kg-1. The maximum hourly propofol dose was 4.3 [2.1, 10.3] mg kg-1 h-1. Performance fell within clinically acceptable limits for all measures. Significance. A CLAD system designed using robust control theory achieves clinically acceptable performance in the presence of realistic unmodeled disturbances and in spite of realistic model uncertainty, while maintaining infusion rates within acceptable safety limits.

Robust control of burst suppression for medical coma

PubMed Central

Westover, M Brandon; Kim, Seong-Eun; Ching, ShiNung; Purdon, Patrick L; Brown, Emery N

2015-01-01

Objective Medical coma is an anesthetic-induced state of brain inactivation, manifest in the electroencephalogram by burst suppression. Feedback control can be used to regulate burst suppression, however, previous designs have not been robust. Robust control design is critical under real-world operating conditions, subject to substantial pharmacokinetic and pharmacodynamic parameter uncertainty and unpredictable external disturbances. We sought to develop a robust closed-loop anesthesia delivery (CLAD) system to control medical coma. Approach We developed a robust CLAD system to control the burst suppression probability (BSP). We developed a novel BSP tracking algorithm based on realistic models of propofol pharmacokinetics and pharmacodynamics. We also developed a practical method for estimating patient-specific pharmacodynamics parameters. Finally, we synthesized a robust proportional integral controller. Using a factorial design spanning patient age, mass, height, and gender, we tested whether the system performed within clinically acceptable limits. Throughout all experiments we subjected the system to disturbances, simulating treatment of refractory status epilepticus in a real-world intensive care unit environment. Main results In 5400 simulations, CLAD behavior remained within specifications. Transient behavior after a step in target BSP from 0.2 to 0.8 exhibited a rise time (the median (min, max)) of 1.4 [1.1, 1.9] min; settling time, 7.8 [4.2, 9.0] min; and percent overshoot of 9.6 [2.3, 10.8]%. Under steady state conditions the CLAD system exhibited a median error of 0.1 [−0.5, 0.9]%; inaccuracy of 1.8 [0.9, 3.4]%; oscillation index of 1.8 [0.9, 3.4]%; and maximum instantaneous propofol dose of 4.3 [2.1, 10.5] mg kg−1. The maximum hourly propofol dose was 4.3 [2.1, 10.3] mg kg−1 h−1. Performance fell within clinically acceptable limits for all measures. Significance A CLAD system designed using robust control theory achieves clinically acceptable performance in the presence of realistic unmodeled disturbances and in spite of realistic model uncertainty, while maintaining infusion rates within acceptable safety limits. PMID:26020243

Model for predicting peak expiratory flow rate of Nigerian workers in a cement factory in Itori, Ogun State, Nigeria.

PubMed

Ismaila, Salami Olasunkanmi; Akanbi, Olusegun Gabriel; Olaoniye, Wasiu

2015-01-01

The main aim of the study was to propose a model for predicting the peak expiratory flow rate (PEFR) of Nigerian workers in a cement factory. Sixty randomly selected non-smoker and healthy workers (30 in production sections, 30 in the administrative section of the factory) participated in the study. Their physical characteristics and PEFR were measured. Multiple correlations using SPSS version 16.0 were performed on the data. The values of PEFR, using the obtained model, were compared with the measured values using a two-tailed t test. There were positive correlations among age, height and PEFR. A prediction equation for PEFR based on age, height, weight and years of exposure (experience) was obtained with R² = .843 (p < 0.001). The developed model will be useful for the management in determining PEFR of workers in the cement industry for possible medical attention.

Characterization and control of thread mould in cheese.

PubMed

Basílico, J C; debasílico, M Z; Chiericatti, C; Vinderola, C G

2001-06-01

The origin of a mould responsible for the contamination of an Argentinian cheese factory was identified and several antifungal treatments were assessed. Moulds were isolated and identified from vacuum-packed hard cheeses, from the environment and from the surfaces of the factory. A suspension conidia test containing different fungicides was performed; another assay involved the fumigation with p-OH fenilsalicidamide. Only Phoma glomerata was found in all of the mouldy cheeses, and was also obtained from different environments and machine surfaces. The most effective treatments against P. glomerata isolates were 0.5% (w/v) natamycin and 2% (v/v) parabens. Fumigation with p-OH fenilsalicidamide showed no satisfactory results. P. glomerata is an important thread mould-contaminating agent in vacuum-packed hard cheeses. Taking into account the survival of the conidia of the P. glomerata isolates to different antifungal treatments, the sources of contamination need to be controlled by designing a good factory layout.

Educating the handicraft factory workers about tobacco cessation and to assess its effectiveness by motivational interviewing: An Intervention study.

PubMed

Mahajan, Rajeev; Solanki, Jitender; Kurdekar, Raghvendra S; Gupta, Sarika; Modh, Ashish; Yadav, OmPrakash

2017-05-01

Tobacco use is considered to be global pandemic. The study was done to assess the effectiveness of smoking cessation intervention among workers by motivational interviewing among handicraft factories, Jodhpur, Rajasthan. An interventional study was carried out among 400 handicraft factory workers on the basis of inclusion and exclusion criterion. Twenty one handicraft factories were taken into consideration. Training, Standardization and Calibration of Examiners was carried out in the public health department. The structured pre-tested proforma and Fagerstrom questionnaire was used to record the data. Four sessions of intervention were given to workers. Follow ups were carried out after 1 month, 3month and 6month. Paired t-test was used to compare Fagerstrom/smoking analysis mean scores among study and control groups before and after intervention. showed that in study group, a percentage change of +1.2%, seen in high dependence category and -1.5 in very high dependence and after 6 months the change was+14.2%, 18.7%, -19.2% in Very low dependence, Low dependence, Medium dependence, -11.8% was seen in high dependence category and -1.8 in very high dependence. When comparison was done among Fagerstrom/smoking analysis mean scores among study subjects before and after intervention. It was found that there was a significant difference between the mean scores of Fagerstrom/smoking analysis between baseline - 3 months, 3 months to 6 months and 6 months to 9 months among study group as compared to control group. Tobacco addiction produces neurological and behavioural change, optima; approach involving behavioural change and pharmacotherapy are needed.

Actual curriculum development practices instrument: Testing for factorial validity

NASA Astrophysics Data System (ADS)

Foi, Liew Yon; Bakar, Kamariah Abu; Hamzah, Mohd Sahandri Gani; Alwi, Nor Hayati

2014-09-01

The Actual Curriculum Development Practices Instrument (ACDP-I) was developed and the factorial validity of the ACDP-I was tested (n = 107) using exploratory factor analysis procedures in the earlier work of [1]. Despite the ACDP-I appears to be content and construct valid instrument with very high internal reliability qualities for using in Malaysia, the accumulated evidences are still needed to provide a sound scientific basis for the proposed score interpretations. Therefore, the present study addresses this concern by utilising the confirmatory factor analysis to further confirm the theoretical structure of the variable Actual Curriculum Development Practices (ACDP) and enrich the psychometrical properties of ACDP-I. Results of this study have practical implication to both researchers and educators whose concerns focus on teachers' classroom practices and the instrument development and validation process.

Testing the Model of Stigma Communication with a Factorial Experiment in an Interpersonal Context

PubMed Central

Smith, Rachel A.

2014-01-01

Stigmas may regulate intergroup relationships; they may also influence interpersonal actions. This study extends the previous test of the model of stigma communication (Smith, 2012) with a factorial experiment in which the outcomes refer to a hypothetical acquaintance. New affective reactions, sympathy and frustration, and a new personality trait, disgust sensitivity, were explored. In addition, perceived severity and susceptibility of the infection were included as alternative mechanisms explaining the effects. The results (n = 318) showed that message content, message reactions (emotional and cognitive), and disgust sensitivity predicted intentions to regulate the infected acquaintance’s interactions and lifestyle (R2 = .79) and participants’ likelihood of telling others about the acquaintance’s infection (R2 = .35). The findings generally provided support for MSC and directions for improvement. PMID:25425853

Respiratory Morbidity among Indian Tea Industry Workers.

PubMed

Moitra, S; Thapa, P; Das, P; Das, J; Debnath, S; Singh, Mahipal; Datta, A; Sen, S; Moitra, S

2016-07-01

Indian tea industry workers are exposed to various exposures at their workplace. To investigate the respiratory health of Indian tea industry workers. We administered a respiratory questionnaire to and measured lung function in workers of 34 tea gardens and 46 tea factories. We used correlation matrices to test the association between their respiratory symptoms and lung functions. The garden workers complained of shortness of breath 3 times higher than the factory workers. However, nasal allergy was more predominant among the factory workers compared to garden workers (69.6% vs 41.2%, p=0.02). The factory workers had higher total (median 107.3% vs 92.9%, p=0.05, as measured by R at 5 Hz) and peripheral airway resistance (143.8% vs 61.1%, p=0.005, as measured by R at 5-20 Hz) than the garden workers. Respiratory symptoms were inversely associated with airway obstruction as measured by the ratio between forced expiratory volume in 1 second (FEV1) and forced vital capacity (FVC) and positively correlated with increased overall airway reactance among the workers. Respiratory symptoms and increased allergen susceptibility of Indian tea industry workers due to occupational exposures warrant routine systematic surveillance of their workplace air quality and health monitoring.

Knowledge, attitudes and beliefs about HIV infection and AIDS among healthy factory workers and their wives, Kinshasa, Zaire.

PubMed

Irwin, K; Bertrand, J; Mibandumba, N; Mbuyi, K; Muremeri, C; Mukoka, M; Munkolenkole, K; Nzilambi, N; Bosenge, N; Ryder, R

1991-01-01

As a first step in designing an AIDS prevention program at a large factory in Kinshasa, Zaire, we collected information on attitudes towards human immunodeficiency virus (HIV) infection and acquired immunodeficiency syndrome (AIDS) from factory foremen and their wives. Trained moderators conducted twelve focus group discussions (from November through December 1987) that addressed knowledge, attitudes and beliefs about HIV infection and AIDS. In general, participants were familiar with HIV infection and AIDS and considered these conditions leading health problems in Kinshasa. Although participants had a fairly accurate understanding of the causes of HIV infection, modes of transmission and preventive measures, many myths and misconceptions existed. Many participants did not believe that condom use would consistently prevent infection through sexual intercourse. Participants strongly favored the counseling of seropositive persons but showed less consensus about whether the spouse of a seropositive person should be notified of the partner's test result. Participants predicted that couples in which one member is seropositive and the other is not would experience marital discord and friction with family, neighbors and co-workers. These findings were applied to the development of a counseling and educational program for seropositive factory employees and their spouses.

Learning Factory--Integrative E-Learning

ERIC Educational Resources Information Center

Steininger, Peter

2017-01-01

Integrative E-Learning (IEP): The goal of the project is the development and testing of an integrative teaching format for the assembly of imported, tried and tested (classic) teaching elements (e.g. wallboard and flipchart, screen walls and other visualization aids, Projector, manuscripts, and workbooks, etc.), with contemporary, innovative…

Building America Industrialized Housing Partnership (BAIHP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

McIlvaine, Janet; Chandra, Subrato; Barkaszi, Stephen

This final report summarizes the work conducted by the Building America Industrialized Housing Partnership (www.baihp.org) for the period 9/1/99-6/30/06. BAIHP is led by the Florida Solar Energy Center of the University of Central Florida and focuses on factory built housing. In partnership with over 50 factory and site builders, work was performed in two main areas--research and technical assistance. In the research area--through site visits in over 75 problem homes, we discovered the prime causes of moisture problems in some manufactured homes and our industry partners adopted our solutions to nearly eliminate this vexing problem. Through testing conducted in overmore » two dozen housing factories of six factory builders we documented the value of leak free duct design and construction which was embraced by our industry partners and implemented in all the thousands of homes they built. Through laboratory test facilities and measurements in real homes we documented the merits of 'cool roof' technologies and developed an innovative night sky radiative cooling concept currently being tested. We patented an energy efficient condenser fan design, documented energy efficient home retrofit strategies after hurricane damage, developed improved specifications for federal procurement for future temporary housing, compared the Building America benchmark to HERS Index and IECC 2006, developed a toolkit for improving the accuracy and speed of benchmark calculations, monitored the field performance of over a dozen prototype homes and initiated research on the effectiveness of occupancy feedback in reducing household energy use. In the technical assistance area we provided systems engineering analysis, conducted training, testing and commissioning that have resulted in over 128,000 factory built and over 5,000 site built homes which are saving their owners over $17,000,000 annually in energy bills. These include homes built by Palm Harbor Homes, Fleetwood, Southern Energy Homes, Cavalier and the manufacturers participating in the Northwest Energy Efficient Manufactured Home program. We worked with over two dozen Habitat for Humanity affiliates and helped them build over 700 Energy Star or near Energy Star homes. We have provided technical assistance to several show homes constructed for the International builders show in Orlando, FL and assisted with other prototype homes in cold climates that save 40% over the benchmark reference. In the Gainesville Fl area we have several builders that are consistently producing 15 to 30 homes per month in several subdivisions that meet the 30% benchmark savings goal. We have contributed to the 2006 DOE Joule goals by providing two community case studies meeting the 30% benchmark goal in marine climates.« less

The Impact of Advanced Placement Courses on High School Students Taking the Scholastic Aptitude Test.

ERIC Educational Resources Information Center

Thomas, L. M.; Thomas, Suzanne G.

This obtrusive post-hoc quasi-experimental study investigated Scholastic Assessment Test (SAT) scores of 111 high school students in grades 10 through 12. Fifty-three students were enrolled in at least one Advanced Placement (AP) course at the time of the study. General factorial analysis of variance (ANOVA) tested for significant differences…

Medical nutrition therapy: use of sourdough lactic acid bacteria as a cell factory for delivering functional biomolecules and food ingredients in gluten free bread

PubMed Central

2011-01-01

Celiac disease (CD) is an immune-mediated disease, triggered in genetically susceptible individuals by ingesting gluten from wheat, rye, barley, and other closely related cereal grains. Currently, the estimated prevalence of CD is around 1 % of the population in the western world and medical nutritional therapy (MNT) is the only accepted treatment for celiac disease. To date, the replacement of gluten in bread presents a significant technological challenge for the cereal scientist due to the low baking performance of gluten free products (GF). The increasing demand by the consumer for high quality gluten-free (GF) bread, clean labels and natural products is rising. Sourdough has been used since ancient times for the production of rye and wheat bread, its universal usage can be attributed to the improved quality, nutritional properties and shelf life of sourdough based breads. Consequently, the exploitation of sourdough for the production of GF breads appears tempting. This review will highlight how sourdough LAB can be an efficient cell factory for delivering functional biomolecules and food ingredients to enhance the quality of gluten free bread. PMID:21995616

Auditory and Subjective Effects of Airborne Noise from Industrial Ultrasonic Sources

PubMed Central

Acton, W. I.; Carson, M. B.

1967-01-01

This investigation was undertaken primarily to examine the possibility of hearing damage from industrial ultrasonic equipment. In the factory concerned, ultrasonic washers and drills were used at a number of different locations, and girls working 12 ft (3·6 m.) away from one bank of three small washers complained of unpleasant subjective effects which included fatigue, persistent headaches, nausea, and tinnitus. As personnel working in the vicinity of similar washers in other parts of the factory did not complain of these effects, it seemed possible that the noise had been transmitted along a column of air in a bank of dryboxes. Enclosure of these washers by a sliding screen of Perspex had completely abated the trouble. Sound pressure level measurements taken in the positions occupied by the operators indicated that, when the effects occur, they are probably caused by high sound levels at the upper audio-frequencies present with the ultrasonic noise, and this was supported by a limited laboratory investigation. Audiometric investigation showed that hearing damage due to noise from these industrial ultrasonic devices is unlikely. However, extrapolations of currently accepted hearing damage risk criteria may be valid in predicting the occurrence of these subjective effects. Images PMID:6073088

Sample size requirements for separating out the effects of combination treatments: Randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis

PubMed Central

2011-01-01

Background In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 × 2 factorial design. Methods We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. Results In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Conclusions Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 × 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Trial registration Current Controlled Trials ISRCTN61649292 PMID:21288326

Interaction Analysis in MANOVA.

ERIC Educational Resources Information Center

Betz, M. Austin

Simultaneous test procedures (STPS for short) in the context of the unrestricted full rank general linear multivariate model for population cell means are introduced and utilized to analyze interactions in factorial designs. By appropriate choice of an implying hypothesis, it is shown how to test overall main effects, interactions, simple main,…

Study of Fire Extinguishment of a Replacement Fluid for Use in Transformers in Lieu of Askarel

DOT National Transportation Integrated Search

1981-04-01

A series of tests were performed at the Factory Mutual Test Center 1) to obtain information on the performance of various extinguishing agents used with hand-held fire extinguishers to control fire involving a Midel,a transformer fluid for replacem...

Unidimensional Interpretations for Multidimensional Test Items

ERIC Educational Resources Information Center

Kahraman, Nilufer

2013-01-01

This article considers potential problems that can arise in estimating a unidimensional item response theory (IRT) model when some test items are multidimensional (i.e., show a complex factorial structure). More specifically, this study examines (1) the consequences of model misfit on IRT item parameter estimates due to unintended minor item-level…

Rapid Prototyping of Microbial Cell Factories via Genome-scale Engineering

PubMed Central

Si, Tong; Xiao, Han; Zhao, Huimin

2014-01-01

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. PMID:25450192

Resin Dermatitis in a Car Factory

PubMed Central

Engel, H. O.; Calnan, C. D.

1966-01-01

An outbreak of dermatitis in a car assembly factory is described; it affected 50 workers who handled rubber weatherstrips coated with an adhesive. The adhesive was found to contain para-tertiary butyl phenol (P.T.B.P.) formaldehyde resin. Of those patch tested 70% gave positive reactions to the adhesive and 65% to the resin. Improved methods of handling and personal protection succeeded in arresting the occurrence of dermatitis. Barrier creams gave no protection in these circumstances. The episode illustrates the different preventive control methods which have to be tried when dealing with a simple skin hazard which cannot be abolished. Images PMID:5904100

Factorials of real negative and imaginary numbers - A new perspective.

PubMed

Thukral, Ashwani K

2014-01-01

Presently, factorials of real negative numbers and imaginary numbers, except for zero and negative integers are interpolated using the Euler's gamma function. In the present paper, the concept of factorials has been generalised as applicable to real and imaginary numbers, and multifactorials. New functions based on Euler's factorial function have been proposed for the factorials of real negative and imaginary numbers. As per the present concept, the factorials of real negative numbers, are complex numbers. The factorials of real negative integers have their imaginary part equal to zero, thus are real numbers. Similarly, the factorials of imaginary numbers are complex numbers. The moduli of the complex factorials of real negative numbers, and imaginary numbers are equal to their respective real positive number factorials. Fractional factorials and multifactorials have been defined in a new perspective. The proposed concept has also been extended to Euler's gamma function for real negative numbers and imaginary numbers, and beta function.

Translations on North Korea No. 622

DTIC Science & Technology

1978-10-13

Pyongyang Power Station 5 July Electric Factory Hamhung Machine Tool Factory Kosan Plastic Pipe Factory Sog’wangea Plastic Pipe Factory 8...August Factory Double Chollima Hamhung Disabled Veterans’ Plastic Goods Factory Mangyongdae Machine Tool Factory Kangso Coal Mine Tongdaewon Garment...21 Jul 78 p 4) innovating in machine tool production (NC 21 Jul 78 p 2) in 40 days of the 蔴 days of combat" raised coal production 10 percent

Science and Technology Review, January-February 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Table of contents: accelerators at Livermore; the B-Factory and the Big Bang; assessing exposure to radiation; next generation of computer storage; and a powerful new tool to detect clandestine nuclear tests.

Validation of the Malay Version of the Parental Bonding Instrument among Malaysian Youths Using Exploratory Factor Analysis.

PubMed

Muhammad, Noor Azimah; Shamsuddin, Khadijah; Omar, Khairani; Shah, Shamsul Azhar; Mohd Amin, Rahmah

2014-01-01

Parenting behaviour is culturally sensitive. The aims of this study were (1) to translate the Parental Bonding Instrument into Malay (PBI-M) and (2) to determine its factorial structure and validity among the Malaysian population. The PBI-M was generated from a standard translation process and comprehension testing. The validation study of the PBI-M was administered to 248 college students aged 18 to 22 years. Participants in the comprehension testing had difficulty understanding negative items. Five translated double negative items were replaced with five positive items with similar meanings. Exploratory factor analysis showed a three-factor model for the PBI-M with acceptable reliability. Four negative items (items 3, 4, 8, and 16) and item 19 were omitted from the final PBI-M list because of incorrect placement or low factor loading (< 0.32). Out of the final 20 items of the PBI-M, there were 10 items for the care factor, five items for the autonomy factor and five items for the overprotection factor. All the items loaded positively on their respective factors. The Malaysian population favoured positive items in answering questions. The PBI-M confirmed the three-factor model that consisted of care, autonomy and overprotection. The PBI-M is a valid and reliable instrument to assess the Malaysian parenting style. Confirmatory factor analysis may further support this finding. Malaysia, parenting, questionnaire, validity.

Hyposensitization to poison ivy after working in a cashew nut shell oil processing factory.

PubMed

Reginella, R F; Fairfield, J C; Marks, J G

1989-04-01

19 adults were patch tested to urushiol, the allergen in poison ivy/oak, to determine their sensitivity to this allergen after working in a cashew nut shell oil (CNSO) processing plant. The cashew nut tree and poison ivy/oak are in the same botanical family. Anacardiaceae, and they share similar chemicals which cause allergic contact dermatitis. 13 of the 19 workers had a preemployment history of poison ivy sensitivity, with 10 developing CNSO dermatitis. After working in this factory for several months, 9 of the 13 noticed a decreased sensitivity or no sensitivity to poison ivy/oak. When tested to urushiol extract, only 3 reacted positively, 2 minimally. These results imply that hyposensitization to poison ivy/oak occurred in these employees after development of hardening to cashew nut shell oil.

A systematic approach to designing statistically powerful heteroscedastic 2 × 2 factorial studies while minimizing financial costs.

PubMed

Jan, Show-Li; Shieh, Gwowen

2016-08-31

The 2 × 2 factorial design is widely used for assessing the existence of interaction and the extent of generalizability of two factors where each factor had only two levels. Accordingly, research problems associated with the main effects and interaction effects can be analyzed with the selected linear contrasts. To correct for the potential heterogeneity of variance structure, the Welch-Satterthwaite test is commonly used as an alternative to the t test for detecting the substantive significance of a linear combination of mean effects. This study concerns the optimal allocation of group sizes for the Welch-Satterthwaite test in order to minimize the total cost while maintaining adequate power. The existing method suggests that the optimal ratio of sample sizes is proportional to the ratio of the population standard deviations divided by the square root of the ratio of the unit sampling costs. Instead, a systematic approach using optimization technique and screening search is presented to find the optimal solution. Numerical assessments revealed that the current allocation scheme generally does not give the optimal solution. Alternatively, the suggested approaches to power and sample size calculations give accurate and superior results under various treatment and cost configurations. The proposed approach improves upon the current method in both its methodological soundness and overall performance. Supplementary algorithms are also developed to aid the usefulness and implementation of the recommended technique in planning 2 × 2 factorial designs.

Factorial structure of recklessness: to what extent are older drivers different?

PubMed

Monterde i Bort, Hector

2004-01-01

This study tests whether the original factorial structure of a recklessness questionnaire can be maintained for the current Spanish population of older drivers. Our recent interest in dedicating special attention to senior citizen mobility (Monterde, 2001), is due to the impending increase of the aging population in Western countries; this has led us to reinitiate the psychometric study of the construct validity, revising and including older drivers in the psychometric aspects of those evaluation instruments that will then be used in the Spanish psycho-medical check of drivers and in research. Factorial analysis was used to determine validity. There was an appearance of a different psychological pattern in elderly drivers, specifically, a psychological anxiety trait related to the task of driving. Furthermore, interesting data were found about the attitude of this sector toward the "traffic society" and toward some of the measures included in Spanish legislation that affect especially older drivers (such as the psycho-medical check). IMPACT ON INDUSTRY, RESEARCH AND PRACTICE: These results suggest the possible existence of some kind of "compensation phenomenon," which could have influence over the scores obtained and their interpretation. Consequently, the evaluation instruments should be tested and, if necessary, adapted or specifically created for use with this age group.

Factorial invariance and stability of the Effort-Reward Imbalance Scales: a longitudinal analysis of two samples with different time lags.

PubMed

de Jonge, Jan; van der Linden, Sjaak; Schaufeli, Wilmar; Peter, Richard; Siegrist, Johannes

2008-01-01

Key measures of Siegrist's (1996) Effort-Reward Imbalance (ERI) Model (i.e., efforts, rewards, and overcommitment) were psychometrically tested. To study change in organizational interventions, knowledge about the type of change underlying the instruments used is needed. Next to assessing baseline factorial validity and reliability, the factorial stability over time - known as alpha-beta-gamma change - of the ERI scales was examined. Psychometrics were tested among 383 and 267 healthcare workers from two Dutch panel surveys with different time lags. Baseline results favored a five-factor model (i.e., efforts, esteem rewards, financial/career-related aspects, job security, and overcommitment) over and above a three-factor solution (i.e., efforts, composite rewards, and overcommitment). Considering changes as a whole, particularly the factor loadings of the three ERI scales were not equal over time. Findings suggest in general that moderate changes in the ERI factor structure did not affect the interpretation of mean changes over time. Occupational health researchers utilizing the ERI scales can feel confident that self-reported changes are more likely to be due to factors other than structural change of the ERI scales over time, which has important implications for evaluating job stress and health interventions.

Factorial validity of an abbreviated neighborhood environment walkability scale for seniors in the Nurses' Health Study.

PubMed

Starnes, Heather A; McDonough, Meghan H; Tamura, Kosuke; James, Peter; Laden, Francine; Troped, Philip J

2014-10-10

Using validated measures of individuals' perceptions of their neighborhood built environment is important for accurately estimating effects on physical activity. However, no studies to date have examined the factorial validity of a measure of perceived neighborhood environment among older adults in the United States. The purpose of this measurement study was to test the factorial validity of a version of the Abbreviated Neighborhood Environment Walkability Scale (NEWS-A) modified for seniors in the Nurses' Health Study (NHS). A random sample of 2,920 female nurses (mean age = 73 ± 7 years) in the NHS cohort from California, Massachusetts, and Pennsylvania completed a 36-item modified NEWS-A for seniors. Confirmatory factor analyses were conducted to test measurement models for both the modified NEWS-A for seniors and the original NEWS-A. Internal consistency within factors was examined using Cronbach's alpha. The hypothesized 7-factor measurement model was a poor fit for the modified NEWS-A for seniors. Overall, the best-fitting measurement model was the original 6-factor solution to the NEWS-A. Factors were correlated and internally consistent. This study provided support for the construct validity of the original NEWS-A for assessing perceptions of neighborhood environments in older women in the United States.

Does bottle type and acid-washing influence trace element analyses by ICP-MS on water samples? A test covering 62 elements and four bottle types: high density polyethene (HDPE), polypropene (PP), fluorinated ethene propene copolymer (FEP) and perfluoroalkoxy polymer (PFA).

PubMed

Reimann, C; Siewers, U; Skarphagen, H; Banks, D

1999-10-01

Groundwater samples from 15 boreholes in crystalline bedrock aquifers in South Norway (Oslo area) have been collected in parallel in five different clear plastic bottle types (high density polyethene [HDPE], polypropene [PP, two manufacturers], fluorinated ethene propene copolymer [FEP] and perfluoroalkoxy polymer [PFA]. In the cases of polyethene and polypropene, parallel samples have been collected in factory-new (unwashed) bottles and acid-washed factory-new bottles. Samples have been analysed by ICP-MS techniques for a wide range of inorganic elements down to the ppt (ng/l) range. It was found that acid-washing of factory-new flasks had no clear systematic beneficial effect on analytical result. On the contrary, for the PP-bottles concentrations of Pb and Sn were clearly elevated in the acid-washed bottles. Likewise, for the vast majority of elements, bottle type was of no importance for analytical result. For six elements (Al, Cr, Hf, Hg, Pb and Sn) some systematic differences for one or more bottle types could be tentatively discerned, but in no case was the discrepancy of major cause for concern. The most pronounced effect was for Cr, with clearly elevated concentrations returned from the samples collected in HDPE bottles, regardless of acid-washing or not. For the above six elements, FEP or PFA bottles seemed to be marginally preferable to PP and HDPE. In general, cheap HDPE, factory new, unwashed flasks are suitable for sampling waters for ICP-MS ultra-trace analysis of the elements tested.

Evolution of solid rocket booster component testing

NASA Technical Reports Server (NTRS)

Lessey, Joseph A.

1989-01-01

The evolution of one of the new generation of test sets developed for the Solid Rocket Booster of the U.S. Space Transportation System. Requirements leading to factory checkout of the test set are explained, including the evolution from manual to semiautomated toward fully automated status. Individual improvements in the built-in test equipment, self-calibration, and software flexibility are addressed, and the insertion of fault detection to improve reliability is discussed.

77 FR 51880 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria AGENCY: Nuclear Regulatory Commission... construction activities through inspections, tests, analyses, and acceptance criteria (ITAAC) under a combined... inspections, tests, or analyses were performed as required, or that acceptance criteria are met, and to notify...

Psychometric evaluation of the Moral Distress Risk Scale: A methodological study.

PubMed

Schaefer, Rafaela; Zoboli, Elma Lcp; Vieira, Margarida M

2017-01-01

Moral distress is a kind of suffering that nurses may experience when they act in ways that are considered inconsistent with moral values, leading to a perceived compromise of moral integrity. Consequences are mostly negative and include physical and psychological symptoms, in addition to organizational implications. To psychometrically test the Moral Distress Risk Scale. A methodological study was realized. Data were submitted to exploratory factorial analysis through the SPSS statistical program. Participants and research context: In total, 268 nurses from hospitals and primary healthcare settings participated in this research during the period of March to June of 2016. Ethical considerations: This research has ethics committee approval. The Moral Distress Risk Scale is composed of 7 factors and 30 items; it shows evidence of acceptable reliability and validity with a Cronbach's α = 0.913, a total variance explained of 59%, a Kaiser-Meyer-Olkin = 0.896, and a significant Bartlett <0.001. Concerns about moral distress should be beyond acute care settings, and a tool to help clarify critical points in other healthcare contexts may add value to moral distress speech. Psychometric results reveal that the Moral Distress Risk Scale can be applied in different healthcare contexts.

Reduction of pollutants in painting operation and suggestion of an optimal technique for extracting titanium dioxide from paint sludge in car manufacturing industries--case study (SAIPA).

PubMed

Khezri, Seyed Mostafa; Shariat, Seyed Mahmood; Tabibian, Sahar

2012-06-01

Paint sludge of car manufacturing industries are not disposed in landfills, since they contain hazardous materials with a high concentration of chromium, aluminum, titanium, barium, copper, Iron, magnesium, strontium, and so on. Thus, it is essential to find solutions in order to neutralize them or suggest cost-effective techniques, which are also environmentally acceptable. Because, this sludge contains considerable amounts of Ti pigments and unbaked resins, recycling these pigments--which could be used in a variety of industries such as paint factories--is an appropriate subject for further research. In this article, with the aim of identification of main pollutants in order to eliminate them and suggest a cost-effective solution to recover the sludge, a large number of tests including X-ray fluorescence spectroscopy, X ray diffraction spectroscopy, and diffusion thermal analysis are conducted to determine types and concentration of elements, and combinations of paint sludge in car manufacturing industries. As titanium dioxide (TiO₂) is widely used as the main pigment of automobile paints, an optimal technique is suggested for extracting TiO₂ with high purity percentage through adopting scientific methods such as membrane and electrolysis.

Reedsport PB150 Deployment and Ocean Test Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Phil

2016-06-03

As the first utility scale wave power project in the US, the Wave Power Demonstration Project at Reedsport (OR) was planned to consist of 10 PowerBuoys (Phase II)1, located 2.5 miles off the coast. U.S. Department of Energy (DOE) funding under a prior DOE Grant (DE-FG36-08GO88017) along with funding from PNGC Power, an Oregon-based electric power cooperative, was utilized for the design completion, fabrication, assembly and factory testing of the first PowerBuoy for the Reedsport project. The design and fabrication of the first PowerBuoy and factory testing of the power take-off subsystem were completed, and the power take-off subsystem wasmore » successfully integrated into the spar at the fabricator’s facility in Oregon. The objectives of this follow-on grant were: advance PB150B design from TRL 5/6 to TRL 7/8; deploy a single PB150 and operate autonomously for 2 years; establish O&M costs; collect environmental information; and establish manufacturing methodologies.« less

Apollo experience report environmental acceptance testing

NASA Technical Reports Server (NTRS)

Laubach, C. H. M.

1976-01-01

Environmental acceptance testing was used extensively to screen selected spacecraft hardware for workmanship defects and manufacturing flaws. The minimum acceptance levels and durations and methods for their establishment are described. Component selection and test monitoring, as well as test implementation requirements, are included. Apollo spacecraft environmental acceptance test results are summarized, and recommendations for future programs are presented.

Power and Precision in Confirmatory Factor Analytic Tests of Measurement Invariance

ERIC Educational Resources Information Center

Meade, Adam W.; Bauer, Daniel J.

2007-01-01

This study investigates the effects of sample size, factor overdetermination, and communality on the precision of factor loading estimates and the power of the likelihood ratio test of factorial invariance in multigroup confirmatory factor analysis. Although sample sizes are typically thought to be the primary determinant of precision and power,…

EFFECTS OF BURN RATE, WOOD SPECIES, MOISTURE CONTENT AND WEIGHT OF WOOD LOADED ON WOODSTOVE EMISSIONS

EPA Science Inventory

The report gives results of tests of four woodstove operating parameters (burn rate, wood moisture, wood load, and wood species) at two levels each using a half factorial experimental test design to determine statistically significant effects on the emission components CO, CO2, p...

Psychometric Evaluation of the Italian Adaptation of the Test of Inferential and Creative Thinking

ERIC Educational Resources Information Center

Faraci, Palmira; Hell, Benedikt; Schuler, Heinz

2016-01-01

This article describes the psychometric properties of the Italian adaptation of the "Analyse des Schlussfolgernden und Kreativen Denkens" (ASK; Test of Inferential and Creative Thinking) for measuring inferential and creative thinking. The study aimed to (a) supply evidence for the factorial structure of the instrument, (b) describe its…

Pattern of occupational allergic dermatitis in the Dermatology Clinic, Hospital Kuala Lumpur.

PubMed

Rohna, R; Ganesapillai, T; Salbiah, D; Zaiton, I

1999-03-01

A two years retrospective analysis of patients diagnosed as contact allergic dermatitis with positive patch test attending the Dermatology clinic was performed. Of the 346 patients with a positive patch test, 14% had occupational dermatitis. This condition affected mainly young and inexperienced workers. An inverse relationship was seen between age and prevalence of occupational allergic dermatitis. Allergic hand dermatitis was the commonest presentation in occupational allergic dermatitis. This was followed by dermatitis of the exposed skin (face, neck, hands and forearms). The common sensitising agents identified were rubber chemicals and nickel. The two main groups at risk were factory workers and medical personnel. The common allergens found in factory workers were epoxy resin, pewter, nickel and rubber chemicals. Exposure dermatitis occurred in patients working in the pewter industry. Two thirds of medical personnel with hand dermatitis were allergic to rubber gloves. One year follow up after patch testing showed that 19% of patients still suffered from chronic dermatitis. Dermatitis improved in 34% of patients. Forty-seven percent were cured and stopped attending the clinic after patch testing and adequate counselling.

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Pre-revenue service acceptance testing plan. 232... § 232.505 Pre-revenue service acceptance testing plan. (a) General; submission of plan. Except as... its system the operating railroad or railroads shall submit a pre-revenue service acceptance testing...

Functional Nanopores: A Solid-state Concept for Artificial Reaction Compartments and Molecular Factories.

PubMed

Puebla-Hellmann, Gabriel; Mayor, Marcel; Lörtscher, Emanuel

2016-01-01

On the road towards the long-term goal of the NCCR Molecular Systems Engineering to create artificial molecular factories, we aim at introducing a compartmentalization strategy based on solid-state silicon technology targeting zeptoliter reaction volumes and simultaneous electrical contact to ensembles of well-oriented molecules. This approach allows the probing of molecular building blocks under a controlled environment prior to their use in a complex molecular factory. Furthermore, these ultra-sensitive electrical conductance measurements allow molecular responses to a variety of external triggers to be used as sensing and feedback mechanisms. So far, we demonstrate the proof-of-concept by electrically contacting self-assembled mono-layers of alkane-dithiols as an established test system. Here, the molecular films are laterally constrained by a circular dielectric confinement, forming a so-called 'nanopore'. Device yields above 85% are consistently achieved down to sub-50 nm nanopore diameters. This generic platform will be extended to create distributed, cascaded reactors with individually addressable reaction sites, including interconnecting micro-fluidic channels for electrochemical communication among nanopores and sensing sites for reaction control and feedback. In this scientific outlook, we will sketch how such a solid-state nanopore concept can be used to study various aspects of molecular compounds tailored for operation in a molecular factory.

Batch anaerobic co-digestion of Kimchi factory waste silage and swine manure under mesophilic conditions.

PubMed

Kafle, Gopi Krishna; Kim, Sang Hun; Sung, Kyung Ill

2012-11-01

The objective of this study was to investigate the feasibility of anaerobic co-digestion of Kimchi factory waste silage (KFWS) with swine manure (SM). Chinese cabbage (CC) is the major waste generated by a Kimchi factory and KFWS was prepared by mixing CC and rice bran (RB) (70:30 on a dry matter basis). In Experiment I, the biogas potential of CC and RB were measured and, in Experiment II, the test was conducted with different ratios of KFWS and SM (KFWS: SM=0:100; 33:67; 67:33; 100:0 by% volatile solids (VS) basis). KFWS produced a 27% higher biogas yield and a 59% higher methane yield compared to CC. The specific biogas yields increased by 19, 40 and 57% with KFWS-33%, KFWS-67% and KFWS-100%, respectively compared to SM-100% (394 mL/g VS). Similarly, VS removal increased by 37, 51 and 74% with KFWS-33%, KFWS-67% and KFWS-100%, respectively compared to SM-100%. These results suggested that Kimchi factory waste could be effectively treated by making silage, and the silage could be used as a potential co-substrate to enhance biogas production from SM digesters. Copyright © 2012 Elsevier Ltd. All rights reserved.

Lactic acid bacteria and yeasts associated with spontaneous fermentations during the production of sour cassava starch in Brazil.

PubMed

Lacerda, Inayara C A; Miranda, Rose L; Borelli, Beatriz M; Nunes, Alvaro C; Nardi, Regina M D; Lachance, Marc-André; Rosa, Carlos A

2005-11-25

Sour cassava starch is a traditional fermented food used in the preparation of fried foods and baked goods such as traditional cheese breads in Brazil. Thirty samples of sour cassava starch were collected from two factories in the state of Minas Gerais. The samples were examined for the presence of lactic acid bacteria, yeasts, mesophilic microorganisms, Bacillus cereus and faecal coliforms. Lactic acid bacteria and yeasts isolates were identified by biochemical tests, and the identities were confirmed by molecular methods. Lactobacillus plantarum and Lactobacillus fermentum were the prevalent lactic acid bacteria in product from both factories, at numbers between 6.0 and 9.0 log cfu g(-)(1). Lactobacillus perolans and Lactobacillus brevis were minor fractions of the population. Galactomyces geothricum and Issatchenkia sp. were the prevalent yeasts at numbers of 5.0 log cfu g(-)(1). A species similar to Candida ethanolica was frequently isolated from one factory. Mesophilic bacteria and amylolytic microorganisms were recovered in high numbers at all stages of the fermentation. B. cereus was found at low numbers in product at both factories. The spontaneous fermentations associated with the production of sour cassava starch involve a few species of lactic acid bacteria at high numbers and a variety of yeasts at relatively low numbers.

The clinical utility of lung clearance index in early cystic fibrosis lung disease is not impacted by the number of multiple-breath washout trials

PubMed Central

Foong, Rachel E.; Harper, Alana J.; King, Louise; Turkovic, Lidija; Davis, Miriam; Clem, Charles C.; Davis, Stephanie D.; Ranganathan, Sarath; Hall, Graham L.

2018-01-01

The lung clearance index (LCI) from the multiple-breath washout (MBW) test is a promising surveillance tool for pre-school children with cystic fibrosis (CF). Current guidelines for MBW testing recommend that three acceptable trials are required. However, success rates to achieve these criteria are low in children aged <7 years and feasibility may improve with modified pre-school criteria that accepts tests with two acceptable trials. This study aimed to determine if relationships between LCI and clinical outcomes of CF lung disease differ when only two acceptable MBW trials are assessed. Healthy children and children with CF aged 3–6 years were recruited for MBW testing. Children with CF also underwent bronchoalveolar lavage fluid collection and a chest computed tomography scan. MBW feasibility increased from 46% to 75% when tests with two trials were deemed acceptable compared with tests where three acceptable trials were required. Relationships between MBW outcomes and markers of pulmonary inflammation, infection and structural lung disease were not different between tests with three acceptable trials compared with tests with two acceptable trials. This study indicates that pre-school MBW data from two acceptable trials may provide sufficient information on ventilation distribution if three acceptable trials are not possible. PMID:29707562

Validation of the Child Feeding Questionnaire in Spanish Parents of Schoolchildren.

PubMed

Canals-Sans, Josefa; Blanco-Gómez, Ainara; Luque, Verónica; Ferré, Natàlia; Ferrando, Pere Joan; Gispert-Llauradó, Mariona; Escribano, Joaquín; Closa-Monasterolo, Ricardo

2016-06-01

To test the reliability and factorial validity of the Child Feeding Questionnaire (CFQ) within a Spanish sample. Cross-sectional study. All schools in a Spanish Mediterranean city of about 100,000 inhabitants. From a potential population of 1,623 children (mean age, 8.5 years), 960 parents (459 fathers and 501 mothers) of 515 children participated (32% response). The Spanish version of the CFQ was completed by both parents. Body mass index of the children was obtained from measured heights and weights. Parents reported their anthropometric and employment data. Reliability was assessed using Cronbach α. Factorial validity was examined by Procrustes semi-confirmatory factor and confirmatory factor analyses. Seven major factors with loadings similar to those in the original questionnaire were found: perceived responsibility, perceived parent weight, perceived child weight, concern about child weight (CN), pressure to eat (PE), monitoring, and restriction. Reliability was adequate for each factor and overall CFQ (α = .86). Goodness of fit indexes for confirmatory factor analysis solutions was acceptable. Item loadings ranged from 0.30 to 0.92. The factor of CN was associated with restriction [multivariate coefficient (R(2)) = 0.14; P < .001] and PE (R(2) = 0.36; P< .001). Child's body mass index showed a negative association with PE (R(2) = 0.11; P < .001) and a positive association with CN (R(2) = 0.25; P < .001) and factors related to feeding control (monitoring and restriction, R(2) = 0.04 and R(2) = 0.09, respectively; P < .001). Results support the reliability and validity of the CFQ for a Spanish population, allowing for comparisons across cultures. The CFQ may be useful to identify parental feeding attitudes that can contribute to preventing risky eating behaviors in their children. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

CO2 adsorption on diatomaceous earth modified with cetyltrimethylammonium bromide and functionalized with tetraethylenepentamine: Optimization and kinetics.

PubMed

Pornaroonthama, Phuwadej; Thouchprasitchai, Nutthavich; Pongstabodee, Sangobtip

2015-07-01

The carbon dioxide (CO2) adsorbent diatomaceous earth (DE) was modified with cetyltrimethylammonium bromide (CTAB) and functionalized with varying levels of tetraethylenepentamine (TEPA). The CO2 absorption at atmospheric pressure was optimized by varying the TEPA-loading level (0-40% (w/w)), operating temperature (40-80 °C) and water vapor concentration (0-16% (v/v)) in a 10% (v/v) CO2 feed stream in helium balance using a full 2(3) factorial design. The TEPA/CTAB-DE adsorbents were characterized by X-ray diffractometry, Fourier transform infrared spectrometry and thermogravimetric analyses. The CO2 adsorption capacity increased as each of these three factors increased. The TEPA loading level-water concentration interaction had a positive influence on the CO2 adsorption while the operating temperature-water concentration interaction was antagonistic. The optimal condition for CO2 adsorption on 40%TEPA/CTAB-DE, evaluated via a factorial design response surface method (RSM), was a temperature of 58-68 °C and a water vapor concentration of 9.5-14% (v/v), with a maximum CO2 adsorption capacity of 149.4 mg g(-1) at 63.5 °C and 12% (v/v) water vapor concentration in the feed. Validation and sensitivity tests revealed that the estimated CO2 adsorption capacity was within ±4% of the experimental values, suggesting that the RSM model was satisfied and acceptable. From three kinetic models (pseudo-first-order, pseudo-second-order model and Avrami's equation), assessed using an error function (Err) and the coefficient of determination (R(2)), Avrami's equation was the most appropriate to describe the kinetics of CO2 adsorption on the 40%TEPA/CTAB-DE adsorbent and suggested that more than one reaction pathway occurred in the CO2 adsorption. Copyright © 2015 Elsevier Ltd. All rights reserved.

Peripherally InSerted CEntral catheter dressing and securement in patients with cancer: the PISCES trial. Protocol for a 2x2 factorial, superiority randomised controlled trial.

PubMed

Rickard, Claire M; Marsh, Nicole M; Webster, Joan; Gavin, Nicole C; Chan, Raymond J; McCarthy, Alexandra L; Mollee, Peter; Ullman, Amanda J; Kleidon, Tricia; Chopra, Vineet; Zhang, Li; McGrail, Matthew R; Larsen, Emily; Choudhury, Md Abu; Keogh, Samantha; Alexandrou, Evan; McMillan, David J; Mervin, Merehau Cindy; Paterson, David L; Cooke, Marie; Ray-Barruel, Gillian; Castillo, Maria Isabel; Hallahan, Andrew; Corley, Amanda; Geoffrey Playford, E

2017-06-15

Around 30% of peripherally inserted central catheters (PICCs) fail from vascular, infectious or mechanical complications. Patients with cancer are at highest risk, and this increases morbidity, mortality and costs. Effective PICC dressing and securement may prevent PICC failure; however, no large randomised controlled trial (RCT) has compared alternative approaches. We designed this RCT to assess the clinical and cost-effectiveness of dressing and securements to prevent PICC failure. Pragmatic, multicentre, 2×2 factorial, superiority RCT of (1) dressings (chlorhexidine gluconate disc (CHG) vs no disc) and (2) securements (integrated securement dressing (ISD) vs securement device (SED)). A qualitative evaluation using a knowledge translation framework is included. Recruitment of 1240 patients will occur over 3 years with allocation concealment until randomisation by a centralised service. For the dressing hypothesis, we hypothesise CHG discs will reduce catheter-associated bloodstream infection (CABSI) compared with no CHG disc. For the securement hypothesis, we hypothesise that ISD will reduce composite PICC failure (infection (CABSI/local infection), occlusion, dislodgement or thrombosis), compared with SED. types of PICC failure; safety; costs; dressing/securement failure; dwell time; microbial colonisation; reversible PICC complications and consumer acceptability. Relative incidence rates of CABSI and PICC failure/100 devices and/1000 PICC days (with 95% CIs) will summarise treatment impact. Kaplan-Meier survival curves (and log rank Mantel-Haenszel test) will compare outcomes over time. Secondary end points will be compared between groups using parametric/non-parametric techniques; p values <0.05 will be considered to be statistically significant. Ethical approval from Queensland Health (HREC/15/QRCH/241) and Griffith University (Ref. No. 2016/063). Results will be published. Trial registration number is: ACTRN12616000315415. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Screening and brief interventions for hazardous alcohol use in accident and emergency departments: a randomised controlled trial protocol

PubMed Central

Coulton, Simon; Perryman, Katherine; Bland, Martin; Cassidy, Paul; Crawford, Mike; Deluca, Paolo; Drummond, Colin; Gilvarry, Eilish; Godfrey, Christine; Heather, Nick; Kaner, Eileen; Myles, Judy; Newbury-Birch, Dorothy; Oyefeso, Adenekan; Parrott, Steve; Phillips, Tom; Shenker, Don; Shepherd, Jonathan

2009-01-01

Background There is a wealth of evidence regarding the detrimental impact of excessive alcohol consumption on the physical, psychological and social health of the population. There also exists a substantial evidence base for the efficacy of brief interventions aimed at reducing alcohol consumption across a range of healthcare settings. Primary research conducted in emergency departments has reinforced the current evidence regarding the potential effectiveness and cost-effectiveness. Within this body of evidence there is marked variation in the intensity of brief intervention delivered, from very minimal interventions to more intensive behavioural or lifestyle counselling approaches. Further the majority of primary research has been conducted in single centre and there is little evidence of the wider issues of generalisability and implementation of brief interventions across emergency departments. Methods/design The study design is a prospective pragmatic factorial cluster randomised controlled trial. Individual Emergency Departments (ED) (n = 9) are randomised with equal probability to a combination of screening tool (M-SASQ vs FAST vs SIPS-PAT) and an intervention (Minimal intervention vs Brief advice vs Brief lifestyle counselling). The primary hypothesis is that brief lifestyle counselling delivered by an Alcohol Health Worker (AHW) is more effective than Brief Advice or a minimal intervention delivered by ED staff. Secondary hypotheses address whether short screening instruments are more acceptable and as efficient as longer screening instruments and the cost-effectiveness of screening and brief interventions in ED. Individual participants will be followed up at 6 and 12 months after consent. The primary outcome measure is performance using a gold-standard screening test (AUDIT). Secondary outcomes include; quantity and frequency of alcohol consumed, alcohol-related problems, motivation to change, health related quality of life and service utilisation. Discussion This paper presents a protocol for a large multi-centre pragmatic factorial cluster randomised trial to evaluate the effectiveness and cost-effectiveness of screening and brief interventions for hazardous alcohol users attending emergency departments. Trial Registration ISRCTN 93681536 PMID:19575791

SU-F-T-487: On-Site Beam Matching of An Elekta Infinity with Agility MLC with An Elekta Versa HD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, C; Garcia, M; Mason, B

2016-06-15

Purpose: Historically, beam matching of similar Linear Accelerators has been accomplished by sending beam data to the manufacturer to match at their factory. The purpose of this work is to demonstrate that fine beam matching can be carried out on-site as part of the acceptance test, with similar or better results. Methods: Initial scans of a 10 × 10 Percent depth dose (PDD) and a 40 × 40 beam profile at the depth of Dmax, for 6MV and 10 MV were taken to compare with the standard beam data from the Versa. The energy was then adjusted and the beammore » steered to achieve agreement between the depth dose and the horns of the beam profile. This process was repeated until the best agreement between PDD and profiles was achieved. Upon completion, all other clinical data were measured to verify match. This included PDD, beam profiles, output factors and Wedge factors. For electron beams PDD’s were matched and the beam profiles verified for the final beam energy. Confirmatory PDD and beam profiles for clinical field sizes, as well as Output Factors were measured. Results: The average difference in PDD’s for 6MV and 10MV were within 0.4% for both wedged and open fields. Beam profile comparisons over the central 80% of the field, at multiple depths, show agreement of 0.8% or less for both wedged and open fields. Average output factor agreement over all field sizes was 0.4% for 6MV and 0.2 % for 10MV. Wedge factors agreement was less than 0.6% for both photon energies over all field sizes. Electron PDD agreed to 0.5mm. Cone ratios agreed to 1% or less. Conclusion: This work indicates that beam matching can be carried out on-site simply and quickly. The results of this beam matching can achieve similar or better results than factory matching.« less

Particulate matters collected from ceramic factories in Lampang Province affecting rat lungs*

PubMed Central

Fongmoon, Duriya; Pongnikorn, Surathat; Chaisena, Aphiruk; Iamsaard, Sitthichai

2014-01-01

Background: Lung cancer ranks as the fifth largest of all cancer cases in Thailand. However, it is the first leading cancer in the northern part of Thailand (data from 2003–2007). There are several predisposing causes that lead to lung cancer and one important inducement is particulate matters (PMs). Lampang Province in Thailand is famous for the ceramic industry, where there are over 200 ceramic industrial factories. PMs are produced during the ceramic manufacturing process and spread throughout all of the working areas. It is very possible that workers could directly inhale PM-contaminated air during working hours. Objective: This study focuses on the toxic effects of PMs collected from ceramic factories on genes and lungs of rats. Methods: PMs collected from six ceramic factories in Lampang Province were extracted using dimethyl sulfoxide (DMSO). The inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) were used to analyze the chemical elements at lower and higher concentrations, respectively. Then, the toxicity of PMs on the genes was examined by the Ames test, and subsequently, the effect of PMs on DNA was examined by quantifying the amount of 8-hydroxy-2′-deoxyguanosine (8-OHdG). Finally, the toxicity of the PMs on rat’s lungs was examined by histology. Results: As chemical elements of lower concentrations, cadmium, chromium, nickel, copper, and lead were detected by ICP-MS. As chemical elements of higher concentrations, manganese, magnesium, zinc, iron, potassium, calcium, and sodium were detected by ICP-OES. No mutagenicity in Salmonella typhimurium was found in the PM extracts from all six factories by utilizing the Ames test. In the histological study, the reduction in spaces of alveolar ducts and sacs, and terminal bronchioles, the thickening of interstitial connective tissues were noted by PM extracts in high amounts (100 and 350 μg). Female rats were more sensitive to PM extracts than males in terms of their pulmonary damages. Conclusions: PMs were not mutagenic to S. typhimurium but can damage the lung tissue of rats. PMID:24390747

Post-abortion care and voluntary HIV counselling and testing--an example of integrating HIV prevention into reproductive health services.

PubMed

Rasch, Vibeke; Yambesi, Fortunata; Massawe, Siriel

2006-05-01

To assess the acceptance and outcome of voluntary HIV counselling and testing (VCT) among women who had an unsafe abortion. 706 women were provided with post-abortion contraceptive service and offered VCT. We collected data on socioeconomic characteristics and contraceptive use and determined the HIV status of those who accepted VCT. Using a nested case-control design, we compared women who accepted HIV testing with women who did not. To study the association between socioeconomic factors, HIV testing acceptance and condom use in more detail, we did stratified analyses based on age and marital status. 58% of the women who had an unsafe abortion accepted HIV testing. Women who earned an income were more likely to accept testing than housewives. Women who accepted testing were more likely to accept using a condom. The HIV prevalence rate was 19% among single women aged 20-24 years and 25% among single women aged 25-45 years. HIV testing and condoms were accepted by most women who had an unsafe abortion. The poor reproductive health of these women could be improved by good post-abortion care that includes contraceptive counselling, VCT and condom promotion.

Effects of dairy factory, milk casein content and titratable acidity on coagulation properties in Trentingrana dairy industry.

PubMed

Penasa, Mauro; Toffanin, Valentina; Cologna, Nicola; Cassandro, Martino; De Marchi, Massimo

2016-05-01

The objective of the present study was to investigate the effect of environmental factors, milk casein content and titratable acidity on milk coagulation properties (MCP) of samples routinely collected in the Trento province (northeast Italy) under field conditions. Rennet coagulation time (RCT, min), curd-firming time (k20, min) and curd firmness (a30, mm) were determined by Formagraph on 14 971 samples from 635 herds associated to 17 dairy factories. Besides MCP, fat, protein, and casein percentages, titratable acidity (TA), and somatic cell and bacterial counts were available. A standardised index of milk aptitude to coagulate (IAC) was derived using information of RCT and a30. An analysis of variance was conducted on MCP and IAC using a fixed effects linear model. Approximately 3% of milk samples did not form a curd within the testing time (30 min) and k20 was missing for 26% of milks. The percentage of samples without information on k20 largely differed among dairy factories (1·7-20·9%). Significant differences were estimated between the best and the worst dairy factory for RCT (-2 min), k20 (-1·2 min), a30 (+3·4 mm) and IAC (+2·6 points). Milk casein content and TA were important factors in explaining the variation of MCP and IAC, supporting the central role of these two traits on technological properties. The Trento province is heterogeneous in terms of dairy systems and this could explain the differences among dairy factories.

Unmetabolized VOCs in urine as biomarkers of low level occupational exposure.

PubMed

Janasik, Beata; Jakubowski, Marek; Wesołowski, Wiktor; Kucharska, Małgorzata

2010-01-01

To compare the usefulness of determining unchanged forms of volatile organic compounds (VOCs), namely toluene (TOL), ethylbenzene (EB) and xylene (XYL), in urine with the effectiveness of the already used biomarkers of occupational exposure. Surveys were conducted in two workplaces (paint factory and footwear factory). In total, 65 subjects participated in the study. Air samples were collected using individual samplers during work shift. Urine and blood samples were collected at the end of work shift. Urine samples were analyzed for unchanged compounds and selected metabolites, while blood samples were tested for unchanged compounds. VOCs in blood and urine were determined by solid phase microextraction gas chromatography (SPME-GC-MS). In the paint factory, the geometric mean (GM) concentrations of VOCs in the air ranged as follows: 0.2-4.7 mg/m(3) for TOL, 0.4-40.9 mg/m(3) for EB and 0.1-122.6 mg/m(3) for XYL. In the footwear factory, the GM concentration of TOL in the air amounted to 105.4 mg/m(3). A significant correlation (p < 0.05) was observed between VOCs in blood, urine and air. The regression analyses performed for paint factory workers showed that TOL-U and TOL-B were better biomarkers of exposure (r = 0.72 and r = 0.81) than benzoic acid (r = 0.12) or o-cresol (r = 0.55). The findings of the study point out that the concentration of unchanged VOCs in urine can be a reliable biological indicator of low level occupational exposure to these compounds.

Prefrontal cognitive ability, intelligence, Big Five personality, and the prediction of advanced academic and workplace performance.

PubMed

Higgins, Daniel M; Peterson, Jordan B; Pihl, Robert O; Lee, Alice G M

2007-08-01

Studies 1 and 2 assessed performance on a battery of dorsolateral prefrontal cognitive ability (D-PFCA) tests, personality, psychometric intelligence, and academic performance (AP) in 2 undergraduate samples. In Studies 1 and 2, AP was correlated with D-PFCA (r=.37, p<.01, and r=.33, p<.01, respectively), IQ (r=.24, p<.05, and r=.38, p<.01, respectively), and Conscientiousness (r=.26, p<.05, and r=.37, p<.01, respectively). D-PFCA remained significant in regression analyses controlling for intelligence (or g) and personality. Studies 3 and 4 assessed D-PFCA, personality, and workplace performance among (a) managerial-administrative workers and (b) factory floor workers at a manufacturing company. Prefrontal cognitive ability correlated with supervisor ratings of manager performance at values of r ranging from .42 to .57 (ps<.001), depending on experience, and with factory floor performance at pr=.21 (p=.02), after controlling for experience, age, and education. Conscientiousness correlated with factory floor performance at r=.23.

Total fume and metal concentrations during welding in selected factories in Jeddah, Saudi Arabia.

PubMed

Balkhyour, Mansour Ahmed; Goknil, Mohammad Khalid

2010-07-01

Welding is a major industrial process used for joining metals. Occupational exposure to welding fumes is a serious occupational health problem all over the world. The degree of risk to welder's health from fumes depends on composition, concentration, and the length of exposure. The aim of this study was to investigate workers' welding fume exposure levels in some industries in Jeddah, Saudi Arabia. In each factory, the air in the breathing zone within 0.5 m from welders was sampled during 8-hour shifts. Total particulates, manganese, copper, and molybdenum concentrations of welding fumes were determined. Mean values of eight-hour average particulate concentrations measured during welding at the welders breathing zone were 6.3 mg/m(3) (Factory 1), 5.3 mg/m(3) (Factory 2), 11.3 mg/m(3) (Factory 3), 6.8 mg/m(3) (Factory 4), 4.7 mg/m(3) (Factory 5), and 3.0 mg/m(3) (Factory 6). Mean values of airborne manganese, copper, and molybdenum levels measured during welding were in the range of 0.010 mg/m(3)-0.477 mg/m(3), 0.001 mg/m(3)-0.080 mg/m(3) and 0.001 mg/m(3)-0.058 mg/m(3) respectively. Mean values of calculated equivalent exposure values were: 1.50 (Factory 1), 1.56 (Factory 2), 5.14 (Factory 3), 2.21 (Factory 4), 2.89 (Factory 5), and 1.20 (Factory 6). The welders in factories 1, 2, 3, and 4 were exposed to welding fume concentration above the SASO limit value, which may increase the risk of respiratory health problems.

Soy-yamgurt probiotic drink as a natural potential of antioxidant

NASA Astrophysics Data System (ADS)

Rusmarilin, H.; Nurhasanah; Andayani, RY

2018-02-01

Yogurt is a popular healthy food, consumed by many people. Probiotic are used for better growth and survival of probiotic bacteria as well as to improve organoleptic, rheological and technological properties of soy-yamgurt probiotic. The aims of this study were to determine physicochemical changes and survival of probiotic bacteria due to the effect of ratio of yam-bean with soy-bean extract on the quality of soy-yamgurt probiotic drink. The quality examined were total bacteria, antioxidant activity, lactic acid content, and acceptability including color, texture, flavor, and overall acceptance. This research had been performed using Completely Randomized Design two factorials, consist of five levels i.e.: ratio of yam-bean with soy-bean extract (100:0; 75:25; 50:50; 25:75; 0:100) and the fermentation time (4,6 and 8 hours), the process was repeated three times. The results showed that ratio of yam-bean with soy-bean extract of 50:50 and fermentation for 6 hours incubation produced the best quality. Acceptable probiotic drink containing 1.44 x 109 CFU/mL lactic acid bacteria, IC50 of soy-yamgurt in the attenuation of free radical DPPH ranged from 58.718-18.112 mg/L in 5 minutes incubation and 39.7204-11.9925 mg/L in 60 minutes, and 0.48% lactic acid. This appearance of soy-yamgurt had yellow greenish color, desired texture and flavor, and received the highest score of overall acceptance.

A simple model for factory distribution: Historical effect in an industry city

NASA Astrophysics Data System (ADS)

Uehara, Takashi; Sato, Kazunori; Morita, Satoru; Maeda, Yasunobu; Yoshimura, Jin; Tainaka, Kei-ichi

2016-02-01

The construction and discontinuance processes of factories are complicated problems in sociology. We focus on the spatial and temporal changes of factories at Hamamatsu city in Japan. Real data indicate that the clumping degree of factories decreases as the density of factory increases. To represent the spatial and temporal changes of factories, we apply "contact process" which is one of cellular automata. This model roughly explains the dynamics of factory distribution. We also find "historical effect" in spatial distribution. Namely, the recent factories have been dispersed due to the past distribution during the period of economic bubble. This effect may be related to heavy shock in Japanese stock market.

Rapid prototyping of microbial cell factories via genome-scale engineering.

PubMed

Si, Tong; Xiao, Han; Zhao, Huimin

2015-11-15

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. Copyright © 2014 Elsevier Inc. All rights reserved.

60-MW test using the 30-MW klystrons for the KEKB project

NASA Astrophysics Data System (ADS)

Fukuda, S.; Michizono, S.; Nakao, K.; Saito, Y.; Anami, S.

1995-07-01

The B-Factory is a future plan, requiring an energy upgrade of the KEK linac from 2.5 GeV to 8.0 GeV (KEKB Project). This paper describes the recent development of an S-band high-power pulse klystron to be used as the PF-linac rf-source of the B-Factory. This tube is a modified version of the existing 30-MW tube, which produces 51 MW at a 310 kV beam voltage by optimizing the focusing magnetic field. In order to increase the reliability, the cathode diameter, the gun housing, and the insulation ceramic-seal were enlarged. This tube was redesigned so as to have the same characteristics as the test results of 30-MW tubes at a higher applied voltage without changing the rf interaction region. Four prototype tubes have been manufactured; final test results showed that these new tubes produce an output power of more than 50 MW at 310 kV with an efficiency of 46%. Recently this tube has produced more than 60 MW at a 350 kV beam voltage for a demonstration test. A comparison between the FCI-code prediction and the test results is also given in this paper.

Thin coatings for protecting titanium aluminides in high-temperature oxidizing environments

NASA Technical Reports Server (NTRS)

Wiedemann, K. E.; Taylor, P. J.; Clark, R. K.; Wallace, T. A.

1991-01-01

Titanium aluminides have high specific strengths at high temperatures but are susceptible to environmental attack. Their use in many aerospace applications would require that they be protected with coatings that, for structural efficiency, must be thin. It is conceivable that acceptable coatings might be found in several oxide systems, and consequently, oxide coatings of many compositions were prepared from sol-gels for study. Response-surface methodology was used to refine coating compositions and factorial experiments were used to develop coating strategies. Oxygen permeability diagrams of two-layer coatings for several oxide systems, an analysis of multiple-layer coatings on rough and polished surfaces, and modeling of the oxidation weight gain are presented.

Do Social Workers Apply "Love Thy Neighbor as Thyself" to Gay, Lesbian, Bisexual, and Transpersons in the South?

PubMed

Lennon-Dearing, Robin; Delavega, Elena

2016-09-01

Across the United States there has been a spate of legislative bills and initiatives that blatantly stigmatize and discriminate against the lesbian, gay, bisexual, and transgender (LGBT) community. This study was a cross-sectional, exploratory survey designed to measure the attitudes, perceptions, and behaviors of Tennessee social workers and future social workers toward the LGBT population and toward proposed discriminatory legislation. A 3-way factorial ANOVA investigated the effects of political affiliation, religious affiliation, and social contact on the dependent measures. Significant main effects were found. Self-reported political affiliation was found to be the most important factor predicting LGBT acceptance and LGBT respect among this sample.

Castor bean allergy in the upholstery department of a furniture factory.

PubMed Central

Topping, M D; Tyrer, F H; Lowing, R K

1981-01-01

In this study, undertaken to identify the cause of allergy in several upholstery workers in a furniture factory, the workers were handling several different materials, including glue, silicone spray, upholstery fabrics, and felt. Radio-allergo-sorbent test (RAST) assays showed that sera from sensitised workers contained specific IgE towards the felt; however, further investigations using RAST showed that the allergen was not the felt itself but a contaminant of the felt. The felt was manufactured from sacks, some of which had been used to store castor beans. The sera with raised IgE to the felt also had raised IgE to the castor bean extract. By means of RAST inhibition we confirmed that castor bean allergens in the felt were solely responsible for the raised IgE in the sera. The in-vitro RAST results were found to correlate well with the in-vivo pick tests and clinical symptoms. PMID:7272244

How is flow experienced and by whom? Testing flow among occupations.

PubMed

Llorens, Susana; Salanova, Marisa; Rodríguez, Alma M

2013-04-01

The aims of this paper are to test (1) the factorial structure of the frequency of flow experience at work; (2) the flow analysis model in work settings by differentiating the frequency of flow and the frequency of its prerequisites; and (3) whether there are significant differences in the frequency of flow experience depending on the occupation. A retrospective study among 957 employees (474 tile workers and 483 secondary school teachers) using multigroup confirmatory factorial analyses and multiple analyses of variance suggested that on the basis of the flow analysis model in work settings, (1) the frequency of flow experience has a two-factor structure (enjoyment and absorption); (2) the frequency of flow experience at work is produced when both challenge and skills are high and balanced; and (3) secondary school teachers experience flow more frequently than tile workers. Copyright © 2012 John Wiley & Sons, Ltd.

Thaumatin and gum arabic allergy in chewing gum factory workers.

PubMed

Tschannen, Mattias P; Glück, Ulrich; Bircher, Andreas J; Heijnen, Ingmar; Pletscher, Claudia

2017-07-01

Thaumatin is a sweetener and flavor modifier commonly used in the food industry. Likewise, gum arabic is widely used as a food stabilizer and thickening agent. We report here that a powder mixture composed of 10% thaumatin and 90% gum arabic led to allergic symptoms in the upper airways in occupationally exposed individuals: four of eight workers of a chewing gum factory exposed to this powder mixture had pronounced rhinitis. A positive skin prick test result for pure thaumatin was obtained in all four individuals with rhinitis of whom two also had a positive skin prick test result for pure gum arabic and gum arabic-specific IgE. Subsitution of a powdered thaumatin with a liquid form reduced symptoms among the rhinitic workers. Although gum arabic is a well-known potential allergen, we were unable to find prior documentation of allergic symptoms to thaumatin when it is used in the food industry. © 2017 Wiley Periodicals, Inc.

Acceptance-test report for El Toro Library solar heating and cooling demonstration project (SHAC no. 1501)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

A partial acceptance test was conducted on the El Toro Library Solar Energy System, and the detailed results of the various mode acceptance tests are given. All the modes tested function as designed. Collector array efficiencies were calculated at approximately 40%. Chiller COP was estimated at .50, with chiller loop flow rates approximately 85 to 90% of design flow. The acceptance test included visual inspection, preoperational testing and procedure verification, operational mode checkout, and performance testing. (LEW)

The National Shipbuilding Research Program, Computer Aided Process Planning for Shipyards

DTIC Science & Technology

1986-08-01

Factory Simulation with Conventional Factory Planning Techniques Financial Justification of State-of-the-Art Investment: A Study Using CAPP I–5 T I T L...and engineer to order.” “Factory Simulation: Approach to Integration of Computer- Based Factory Simulation with Conventional Factory Planning Techniques

Self Management Techniques and Disclosure of Sero Status

ERIC Educational Resources Information Center

Falaye, Ajibola; Afolayan, Joel Adeleke

2015-01-01

This study looked at using Self Management Technique (SMT) to promote self-disclosure of Sero status in Kwara State, Nigeria. A pre-test, post-test and control group quasi experimental design using a 2x2x2 factorial matrix was adopted. Sixty participants were sampled by balloting from two HIV/AIDS screening centres. Four instruments were used such…

Psychometric Properties and Factorial Structure of the Chinese Version of the Gratitude Resentment and Appreciation Test

ERIC Educational Resources Information Center

Lin, Shu-Hui; Huang, Yun-Chen

2016-01-01

The purpose of this study was to validate a Chinese version of the Gratitude Resentment and Appreciation Test (GRAT) with Taiwanese students. In Study 1, a total of 2511 Taiwanese students participated and completed the translated GRAT. Exploratory factor analysis, confirmatory factor analysis and reliability analysis were undertaken to assess the…

Effects of Computer Animation Instructional Package on Students' Achievement in Practical Biology

ERIC Educational Resources Information Center

Hamzat, Abdulrasaq; Bello, Ganiyu; Abimbola, Isaac Olakanmi

2017-01-01

This study examined the effects of computer animation instructional package on secondary school students' achievement in practical biology in Ilorin, Nigeria. The study adopted a pre-test, post-test, control group, non-randomised and nonequivalent quasi-experimental design, with a 2x2x3 factorial design. Two intact classes from two secondary…

The Respective Advantages and Disadvantages of Different Ways of Measuring the Instructional Sensitivity of Reading Comprehension Test Items.

ERIC Educational Resources Information Center

Perkins, Kyle

In this paper four classes of procedures for measuring the instructional sensitivity of reading comprehension test items are reviewed. True experimental designs are not recommended because some of the most important reading comprehension variables do not lend themselves to experimental manipulation. "Ex post facto" factorial designs are…

Factorial Structure of the Quick Neurological Screening Test-Revised for Children with Learning Disabilities.

ERIC Educational Resources Information Center

Finlayson, Shannon B.; Obrzut, John E.

1993-01-01

Administered Quick Neurological Screening Test-Revised (QNST-R) to 122 elementary-aged children diagnosed with learning disabilities. QNST-R appeared to measure primarily lower order sensory perception/processing and fine and gross motoric skills, which are thought presumably to serve as basis for later higher order cognitive functions. Age, but…

Improving Senior Secondary School Students' Attitude towards Mathematics through Self and Cooperative-Instructional Strategies

ERIC Educational Resources Information Center

Ifamuyiwa, S. A.; Akinsola, M. K.

2008-01-01

This study investigated the effects of self and cooperative-instructional strategies on senior secondary school students' attitude towards Mathematics. The moderating effects of locus of control and gender were also investigated. The study adopted pre-test and post-test, control group quasi-experimental design using a 3 x 2 x 2 factorial matrix…

Confirmatory Factor Analysis on the Big 5 Personality Test Inventory

ERIC Educational Resources Information Center

Kamarulzaman, Wirawani; Nordin, Mohamad Sahari

2012-01-01

This paper is intended to examine the validity of Big 5 Personality test inventory of 44 questions with 5-Likert Scale measurement. Confirmatory factory analysis (CFA) was conducted to determine the good fit indices of the 5 personality types. Those types are 1) extraversion, 2) agreeableness, 3) conscientiousness, 4) openness and 5) neuroticism.…

Achievement-Based Rewards and Intrinsic Motivation: A Test of Cognitive Mediators

ERIC Educational Resources Information Center

Cameron, Judy; Pierce, W. David; Banko, Katherine M.; Gear, Amber

2005-01-01

This study assessed how rewards impacted intrinsic motivation when students were rewarded for achievement while learning an activity, for performing at a specific level on a test, or for both. Undergraduate university students engaged in a problem-solving activity. The design was a 2 * 2 factorial with 2 levels of reward in a learning phase…

Psychometric properties of the Spanish version of the Mindful Attention Awareness Scale (MAAS) in patients with fibromyalgia.

PubMed

Cebolla, Ausias; Luciano, Juan V; DeMarzo, Marcelo Piva; Navarro-Gil, Mayte; Campayo, Javier Garcia

2013-01-14

Mindful-based interventions improve functioning and quality of life in fibromyalgia (FM) patients. The aim of the study is to perform a psychometric analysis of the Spanish version of the Mindful Attention Awareness Scale (MAAS) in a sample of patients diagnosed with FM. The following measures were administered to 251 Spanish patients with FM: the Spanish version of MAAS, the Chronic Pain Acceptance Questionnaire, the Pain Catastrophising Scale, the Injustice Experience Questionnaire, the Psychological Inflexibility in Pain Scale, the Fibromyalgia Impact Questionnaire and the Euroqol. Factorial structure was analysed using Confirmatory Factor Analyses (CFA). Cronbach's α coefficient was calculated to examine internal consistency, and the intraclass correlation coefficient (ICC) was calculated to assess the test-retest reliability of the measures. Pearson's correlation tests were run to evaluate univariate relationships between scores on the MAAS and criterion variables. The MAAS scores in our sample were low (M = 56.7; SD = 17.5). CFA confirmed a two-factor structure, with the following fit indices [sbX2 = 172.34 (p < 0.001), CFI = 0.95, GFI = 0.90, SRMR = 0.05, RMSEA = 0.06. MAAS was found to have high internal consistency (Cronbach's α = 0.90) and adequate test-retest reliability at a 1-2 week interval (ICC = 0.90). It showed significant and expected correlations with the criterion measures with the exception of the Euroqol (Pearson = 0.15). Psychometric properties of the Spanish version of the MAAS in patients with FM are adequate. The dimensionality of the MAAS found in this sample and directions for future research are discussed.

[Validation of an HIV and other sexually transmitted infections knowledge scale in an adolescent population].

PubMed

Espada, José Pedro; Guillén-Riquelme, Alejandro; Morales, Alexandra; Orgilés, Mireia; Sierra, Juan Carlos

2014-12-01

The objective of this research is to determine the validity and reliability of a questionnaire designed to specifically assess the knowledge of HIV and other sexually transmitted infections in a Spanish adolescent population. Cross-sectional study for the validation of a questionnaire. A total of 17 schools in five Spanish provinces. A total of 1,570 adolescent schoolchildren between 13 and 17 years old. A pool of 40 items relating to knowledge about HIV and other sexually transmitted infections was established. This pool was analyzed by an expert panel. It was then administered to a pilot group with the same demographic characteristics of the sample, to ensure comprehension. Item analysis, internal consistency, test/retest and exploratory factorial analysis. A factor analysis was performed, in which five factors that explained 46% of the total variance were retained: general knowledge about HIV, condom as a protective method, routes of HIV transmission, the prevention of HIV, and other sexually transmitted infections. Reliability measures ranged from 0.66 to 0.88. The test-retest correlation was 0.59. There were gender differences in the knowledge of infections. These factors have adequate internal consistency and acceptable test-retest correlation. Theoretically, these factors fit properly with the content of the items. The factors have a moderate relationship, indicating that a high degree of knowledge about an aspect, but not a guarantee of general knowledge. The availability of a questionnaire to assess knowledge of sexually transmitted infections is helpful to evaluate prevention programs. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

[Prefrontal clinical symptoms in daily living: screening assessment by means of the short Prefrontal Symptoms Inventory (PSI-20)].

PubMed

Pedrero-Pérez, Eduardo J; Ruiz-Sánchez de León, José M; Morales-Alonso, Sara; Pedrero-Aguilar, Jara; Fernández-Méndez, Laura M

2015-05-01

Estimation of daily symptoms of frontal dysfunction is considered to be essential in order to endow neuro-psychological assessments with ecological validity. The questionnaires available today were constructed to estimate executive problems in daily life in populations with neurological damage. There is a need for instruments focused on measuring these behaviours in the general population or in clinical populations with mild or moderate impairment. To examine the factorial validity and to find evidence of concurrent validity of the short version of the Prefrontal Symptoms Inventory. Three samples were obtained: the first, from the Internet (n = 504); the second, in a non-clinical population by means of paper and pencil (n = 1,257); and the third, from patients being treated for substance addiction (n = 602). A factorial analysis without restraints was used on the first sample and the results were submitted to confirmatory factorial analysis on the other two samples. The three-factor structure that was found was confirmed with excellent indicators of fit in the other two samples. Evidence of concurrent validity was found with quality of life and mental health tests. We propose a short questionnaire for detecting failures of a prefrontal origin in daily living, which improves on the psychometric qualities of similar tests, but is oriented towards severe neurological pathologies. The structural stability of the test ensures it can be used in the general population, for the early detection of cognitive impairment, and in clinical populations with mild or moderate deterioration. A set of criteria are proposed for use in interpreting the results.

The Japanese version of the questionnaire about the process of recovery: development and validity and reliability testing.

PubMed

Kanehara, Akiko; Kotake, Risa; Miyamoto, Yuki; Kumakura, Yousuke; Morita, Kentaro; Ishiura, Tomoko; Shimizu, Kimiko; Fujieda, Yumiko; Ando, Shuntaro; Kondo, Shinsuke; Kasai, Kiyoto

2017-11-07

Personal recovery is increasingly recognised as an important outcome measure in mental health services. This study aimed to develop a Japanese version of the Questionnaire about the Process of Recovery (QPR-J) and test its validity and reliability. The study comprised two stages that employed the cross-sectional and prospective cohort designs, respectively. We translated the questionnaire using a standard translation/back-translation method. Convergent validity was examined by calculating Pearson's correlation coefficients with scores on the Recovery Assessment Scale (RAS) and the Short-Form-8 Health Survey (SF-8). An exploratory factor analysis (EFA) was conducted to examine factorial validity. We used intraclass correlation and Cronbach's alpha to examine the test-retest and internal consistency reliability of the QPR-J's 22-item full scale, 17-item intrapersonal and 5-item interpersonal subscales. We conducted an EFA along with a confirmatory factor analysis (CFA). Data were obtained from 197 users of mental health services (mean age: 42.0 years; 61.9% female; 49.2% diagnosed with schizophrenia). The QPR-J showed adequate convergent validity, exhibiting significant, positive correlations with the RAS and SF-8 scores. The QPR-J's full version, subscales, showed excellent test-retest and internal consistency reliability, with the exception of acceptable but relatively low internal consistency reliability for the interpersonal subscale. Based on the results of the CFA and EFA, we adopted the factor structure extracted from the original 2-factor model based on the present CFA. The QPR-J is an adequately valid and reliable measure of the process of recovery among Japanese users with mental health services.

Asphaltic concrete overlays of rigid and flexible pavements : final report.

DOT National Transportation Integrated Search

1980-10-01

This study evaluated the effect of a given thickness of asphaltic concrete overlay in rehabilitating 53 test sections conforming to the experiment design. This factorial design specified various levels of traffic intensity and overlay thickness for b...

[Validity and Reliability of the KIDSCREEN-27 Life Quality Questionnaire, Parents' Version, in Medellin, Colombia].

PubMed

Vélez, Claudia Marcela; Lugo, Luz Helena; García, Héctor Iván

2012-09-01

Validate the KIDSCREEN-27 for parents in the metropolitan area of Medellín, Colombia, including the Social Acceptance (SA) subscale of KIDSCREEN-52, as it evaluates the effect of bullying in Life Quality of children. The study population was made up by parents of children between 8 and 18, from Medellín and its metropolitan area. A sample of 1,150 parents was estimated according to the different psychometric properties to be measured. Construct validation was made by comparing the mean scores between groups of high and low socioeconomic conditions. The content validity and the measurement of reliability were verified by internal consistency and test-retest stability. The parent-child agreement was also measured. The internal consistency was adequate (Cronbach alpha 0,76-0,83). Parents of children with better socio-economic status had higher scores in all dimensions (p<0,05). Scores were higher among healthy children. Women had lower scores than men, while children registered higher scores than adolescents. The intraclass correlation coefficient for the reliability assessment was above 0.7 in all dimensions, except in School Environment-SE- (ICC 0,6-0,92). The parent-child agreement reached moderate and good levels (ICC 0,49-0,69). The exploratory factorial analysis, including social acceptance subscale, registered eight dimensions, four of which in agreement with the original questionnaire: Physical activity, SE, Social Support, and SA subscale. KIDSCREEN-27 for parents is a valid and reliable instrument to be used in the Colombian context. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Factor Structure of the Internet Addiction Test in Online Gamers and Poker Players.

PubMed

Khazaal, Yasser; Achab, Sophia; Billieux, Joel; Thorens, Gabriel; Zullino, Daniele; Dufour, Magali; Rothen, Stéphane

2015-01-01

The Internet Addiction Test (IAT) is the most widely used questionnaire to screen for problematic Internet use. Nevertheless, its factorial structure is still debated, which complicates comparisons among existing studies. Most previous studies were performed with students or community samples despite the probability of there being more problematic Internet use among users of specific applications, such as online gaming or gambling. To assess the factorial structure of a modified version of the IAT that addresses specific applications, such as video games and online poker. Two adult samples-one sample of Internet gamers (n=920) and one sample of online poker players (n=214)-were recruited and completed an online version of the modified IAT. Both samples were split into two subsamples. Two principal component analyses (PCAs) followed by two confirmatory factor analyses (CFAs) were run separately. The results of principal component analysis indicated that a one-factor model fit the data well across both samples. In consideration of the weakness of some IAT items, a 17-item modified version of the IAT was proposed. This study assessed, for the first time, the factorial structure of a modified version of an Internet-administered IAT on a sample of Internet gamers and a sample of online poker players. The scale seems appropriate for the assessment of such online behaviors. Further studies on the modified 17-item IAT version are needed.

Psychometric assessment of the processes of change scale for sun protection.

PubMed

Sillice, Marie A; Babbin, Steven F; Redding, Colleen A; Rossi, Joseph S; Paiva, Andrea L; Velicer, Wayne F

2018-01-01

The fourteen-factor Processes of Change Scale for Sun Protection assesses behavioral and experiential strategies that underlie the process of sun protection acquisition and maintenance. Variations of this measure have been used effectively in several randomized sun protection trials, both for evaluation and as a basis for intervention. However, there are no published studies, to date, that evaluate the psychometric properties of the scale. The present study evaluated factorial invariance and scale reliability in a national sample (N = 1360) of adults involved in a Transtheoretical model tailored intervention for exercise and sun protection, at baseline. Invariance testing ranged from least to most restrictive: Configural Invariance (constraints only factor structure and zero loadings); Pattern Identity Invariance (equal factor loadings across target groups); and Strong Factorial Invariance (equal factor loadings and measurement errors). Multi-sample structural equation modeling tested the invariance of the measurement model across seven subgroups: age, education, ethnicity, gender, race, skin tone, and Stage of Change for Sun Protection. Strong factorial invariance was found across all subgroups. Internal consistency coefficient Alpha and factor rho reliability, respectively, were .83 and .80 for behavioral processes, .91 and .89 for experiential processes, and .93 and .91 for the global scale. These results provide strong empirical evidence that the scale is consistent, has internal validity and can be used in research interventions with population-based adult samples.

Measuring the Processes of Change From the Transtheoretical Model for Physical Activity and Exercise in Overweight and Obese Adults.

PubMed

Romain, Ahmed Jerôme; Bernard, Paquito; Hokayem, Marie; Gernigon, Christophe; Avignon, Antoine

2016-03-01

This study aimed to test three factorial structures conceptualizing the processes of change (POC) from the transtheoretical model and to examine the relationships between the POC and stages of change (SOC) among overweight and obese adults. Cross-sectional study. This study was conducted at the University Hospital of Montpellier, France. A sample of 289 overweight or obese participants (199 women) was enrolled in the study. Participants completed the POC and SOC questionnaires during a 5-day hospitalization for weight management. Structural equation modeling was used to compare the different factorial structures. The unweighted least-squares method was used to identify the best-fit indices for the five fully correlated model (goodness-of-fit statistic = .96; adjusted goodness-of-fit statistic = .95; standardized root mean residual = .062; normed-fit index = .95; parsimonious normed-fit index = .83; parsimonious goodness-of-fit statistic = .78). The multivariate analysis of variance was significant (p < .001). A post hoc test showed that individuals in advanced SOC used more of both experiential and behavioral POC than those in preaction stages, with effect sizes ranging from .06 to .29. This study supports the validity of the factorial structure of POC concerning physical activity and confirms the assumption that, in this context, people with excess weight use both experiential and behavioral processes. These preliminary results should be confirmed in a longitudinal study. © The Author(s) 2016.

Recovery of yttrium from fluorescent powder of cathode ray tube, CRT: Zn removal by sulphide precipitation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Innocenzi, Valentina, E-mail: valentina.innocenzi1@univaq.it; De Michelis, Ida; Ferella, Francesco

2013-11-15

Highlights: • Treatment of fluorescent powder of CRT waste. • Factorial experimental designs to study acid leaching of fluorescent powder and the purification of leach liquors. • Recover of yttrium by precipitation using oxalic acid. • Suitable flowsheet to recover yttrium from fluorescent powder. - Abstract: This work is focused on the recovery of yttrium and zinc from fluorescent powder of cathode ray tube (CRT). Metals are extracted by sulphuric acid in the presence of hydrogen peroxide. Leaching tests are carried out according to a 2{sup 2} full factorial plan and the highest extraction yields for yttrium and zinc equalmore » to 100% are observed under the following conditions: 3 M of sulphuric acid, 10% v/v of H{sub 2}O{sub 2} concentrated solution at 30% v/v, 10% w/w pulp density, 70 °C and 3 h of reaction. Two series of precipitation tests for zinc are carried out: a 2{sup 2} full factorial design and a completely randomized factorial design. In these series the factors investigated are pH of solution during the precipitation and the amount of sodium sulphide added to precipitate zinc sulphide. The data of these tests are used to describe two empirical mathematical models for zinc and yttrium precipitation yields by regression analysis. The highest precipitation yields for zinc are obtained under the following conditions: pH equal to 2–2.5% and 10–12% v/v of Na{sub 2}S concentrated solution at 10% w/v. In these conditions the coprecipitation of yttrium is of 15–20%. Finally further yttrium precipitation experiments by oxalic acid on the residual solutions, after removing of zinc, show that yttrium could be recovered and calcined to obtain the final product as yttrium oxide. The achieved results allow to propose a CRT recycling process based on leaching of fluorescent powder from cathode ray tube and recovery of yttrium oxide after removing of zinc by precipitation. The final recovery of yttrium is 75–80%.« less

A factorial assessment of the sensitivity of the BATS land-surface parameterization scheme. [BATS (Biosphere-Atmosphere Transfer Scheme)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson-Sellers, A.

Land-surface schemes developed for incorporation into global climate models include parameterizations that are not yet fully validated and depend upon the specification of a large (20-50) number of ecological and soil parameters, the values of which are not yet well known. There are two methods of investigating the sensitivity of a land-surface scheme to prescribed values: simple one-at-a-time changes or factorial experiments. Factorial experiments offer information about interactions between parameters and are thus a more powerful tool. Here the results of a suite of factorial experiments are reported. These are designed (i) to illustrate the usefulness of this methodology andmore » (ii) to identify factors important to the performance of complex land-surface schemes. The Biosphere-Atmosphere Transfer Scheme (BATS) is used and its sensitivity is considered (a) to prescribed ecological and soil parameters and (b) to atmospheric forcing used in the off-line tests undertaken. Results indicate that the most important atmospheric forcings are mean monthly temperature and the interaction between mean monthly temperature and total monthly precipitation, although fractional cloudiness and other parameters are also important. The most important ecological parameters are vegetation roughness length, soil porosity, and a factor describing the sensitivity of the stomatal resistance of vegetation to the amount of photosynthetically active solar radiation and, to a lesser extent, soil and vegetation albedos. Two-factor interactions including vegetation roughness length are more important than many of the 23 specified single factors. The results of factorial sensitivity experiments such as these could form the basis for intercomparison of land-surface parameterization schemes and for field experiments and satellite-based observation programs aimed at improving evaluation of important parameters.« less

Gender bias in nineteenth-century England: Evidence from factory children.

PubMed

Horrell, Sara; Oxley, Deborah

2016-09-01

Gender bias against girls in nineteenth-century England has received much interest but establishing its existence has proved difficult. We utilise data on heights of 16,402 children working in northern textile factories in 1837 to examine whether gender bias was evident. Current interpretations argue against any difference. Here our comparisons with modern height standards reveal greater deprivation for girls than for boys. Discrimination is measured in girls' height-for-age score (HAZ) falling eight standard errors below boys' at ages 11, 11.5 and 12 years of age, capturing the very poor performance of factory girls. But this result cannot be taken at face value. We query whether modern standards require adjustment to account for the later timing of puberty in historical populations and develop an alternative. We also test the validity of the age data, considering whether parents were more prone to lie about the ages of their daughters, and question whether the supply of girls was fundamentally different from that of boys. We conclude that neither proposition is justified. Disadvantage to girls remains, although its absence amongst younger children precludes an indictment of culturally founded gender bias. The height data must remain mute on the source of this discrimination but we utilise additional information to examine some hypotheses: occupational sorting, differential susceptibility to disease, poorer nutrition for girls, disproportionate stunting from the effects of nutritional deprivation, and type and amount of work undertaken. Of these we suggest that girls had to do arduous physical labour in the home alongside their factory work. The only (unsubstantiated) alternative is that girls were more likely than boys to be put into factory work below the legal age limit. Both represent forms of gender bias. Copyright © 2016 Elsevier B.V. All rights reserved.

Randomised factorial mixed method pilot study of aerobic and resistance exercise in haemodialysis patients: DIALY-SIZE!

PubMed Central

Thompson, Stephanie; Klarenbach, Scott; Molzahn, Anita; Lloyd, Anita; Gabrys, Iwona; Haykowsky, Mark; Tonelli, Marcello

2016-01-01

Objectives For people with end-stage renal disease requiring haemodialysis, exercise can improve aspects of quality of life (QoL). However, the relative benefits and risks of different types of exercise in this population are unknown. Therefore, this pilot study aimed to evaluate the feasibility of a main study evaluating the efficacy of cycling and resistance exercise each performed during the haemodialysis treatment on QoL. Methods In this factorial (2×2) pilot trial, 31 haemodialysis patients were randomised to cycling, resistance, cycling and resistance, or an attention control. Feasibility was defined a priori by criteria on recruitment, fidelity to the protocol and patient response to the intervention. To better understand feasibility, we conducted interviews with dialysis unit staff and trial participants. As secondary outcomes, we estimated the main effect of cycling and weights each compared with control on QoL, physical function and strength. Findings We exceeded the target accrual of 28 participants over 12 weeks. Irrespective of exercise group allocation, adherence was high; of the 1038 training sessions offered, 87% were initiated and over 80% of exercise sessions were performed as per protocol. Progression based on perceived exertion, individual instruction and interactions with the kinesiologist facilitated acceptability across exercise groups. Using an attention control, measures of contamination and attrition were low. Important barriers to unit staff readiness for the intervention were initial safety and workflow concerns, unit workload and onerous data collection. Secondary outcomes were not statistically significant. Adverse events were low and did not increase with a higher volume of exercise. Conclusions The main study is feasible with minor modifications. In addition to practical assistance, involvement from unit staff could increase patient participation and improve trial implementation. Strategies to increase acceptability of the intervention for staff include improving workflow integration and using a prestudy demonstration phase to introduce the intervention. Trial registration number NCT02234232. Results PMID:27601500

1. VIEW TO SOUTHEAST (NORTHWEST CORNER OF EDIBLE FATS FACTORY) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW TO SOUTHEAST (NORTHWEST CORNER OF EDIBLE FATS FACTORY) - Wilson's Oil House, Lard Refinery, & Edible Fats Factory, Edible Fats Factory, 2801 Southwest Fifteenth Street, Oklahoma City, Oklahoma County, OK

3. VIEW TO SOUTHWEST (NORTHEAST CORNER OF EDIBLE FATS FACTORY) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW TO SOUTHWEST (NORTHEAST CORNER OF EDIBLE FATS FACTORY) - Wilson's Oil House, Lard Refinery, & Edible Fats Factory, Edible Fats Factory, 2801 Southwest Fifteenth Street, Oklahoma City, Oklahoma County, OK

49 CFR 238.111 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the times and places of the pre-revenue service tests to permit FRA observation of such tests. For... 49 Transportation 4 2010-10-01 2010-10-01 false Pre-revenue service acceptance testing plan. 238... and General Requirements § 238.111 Pre-revenue service acceptance testing plan. (a) Passenger...

49 CFR 238.111 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the times and places of the pre-revenue service tests to permit FRA observation of such tests. For... 49 Transportation 4 2011-10-01 2011-10-01 false Pre-revenue service acceptance testing plan. 238... and General Requirements § 238.111 Pre-revenue service acceptance testing plan. (a) Passenger...

49 CFR 238.111 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the times and places of the pre-revenue service tests to permit FRA observation of such tests. For... 49 Transportation 4 2012-10-01 2012-10-01 false Pre-revenue service acceptance testing plan. 238... and General Requirements § 238.111 Pre-revenue service acceptance testing plan. (a) Passenger...

49 CFR 238.111 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... the times and places of the pre-revenue service tests to permit FRA observation of such tests. For... 49 Transportation 4 2014-10-01 2014-10-01 false Pre-revenue service acceptance testing plan. 238... and General Requirements § 238.111 Pre-revenue service acceptance testing plan. (a) Passenger...

49 CFR 238.111 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the times and places of the pre-revenue service tests to permit FRA observation of such tests. For... 49 Transportation 4 2013-10-01 2013-10-01 false Pre-revenue service acceptance testing plan. 238... and General Requirements § 238.111 Pre-revenue service acceptance testing plan. (a) Passenger...

Nuclear metaphors: Why risk communication and public education haven't worked

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flank, S.; Hansen, K.

1991-11-01

Broad public acceptability is a necessary condition for the future success of nuclear power in the US and will be determined by the way the public perceives nuclear power - specifically, through nuclear power's metaphoric equivalences. A content analysis of a cross section of the debate over nuclear power shows that the public does not share a single concept of what nuclear power is - nuclear energy has yet to be firmly anchored in a particular context or caught in a web of relations to the rest of society. The political battleground for the contest over nuclear power is notmore » patterns of risk perception or shortcomings in public education but rather nuclear power as metaphor. For example, is nuclear power a factory producing electricity, or is it indistinguishable from nuclear weapons By highlighting the metaphors that underlie competing conceptions of nuclear power, one can illuminate parts of the political debate that otherwise are consigned to psychology, irrationality, or ignorance. Understanding these metaphors also makes clear the kind of deep changes that would be necessary to secure public acceptance of nuclear power.« less

Proposed acceptance, qualification, and characterization tests for thin-film PV modules

NASA Technical Reports Server (NTRS)

Waddington, D.; Mrig, L.; Deblasio, R.; Ross, R.

1988-01-01

Details of a proposed test program for PV thin-film modules which the Department of Energy has directed the Solar Energy Research Institute (SERI) to prepare are presented. Results of one of the characterization tests that SERI has performed are also presented. The objective is to establish a common approach to testing modules that will be acceptable to both users and manufacturers. The tests include acceptance, qualification, and characterization tests. Acceptance tests verify that randomly selected modules have similar characteristics. Qualification tests are based on accelerated test methods designed to simulate adverse conditions. Characterization tests provide data on performance in a predefined environment.

The share of southeastern black counties in the southern rural renaissance: were they bypassed by factory job gains, 1959-77?

PubMed

Till, T E

1986-04-01

Some authors have suggested that a leading problem associated with US factory employment for blacks may be that the nonfarm jobs--specifically manufacturing--have tended to go to heavily white counties rather than to the mainly black counties of the Deep South. This study is limited to the 1959-1977 period, the time of the most vigorous nonmetropolitan employment growth. To test the hypothesis that factory jobs have bypassed heavily black counties, a 100% sample of nonmetropolitan counties was used from 13 Southern states for the 2 time periods, 1959-1969 and 1969-1977. Results show that the minority counties were not bypassed by Southern rural factory job growth either in the 1960s or the 1970s, but their gains were not as sizeable as those of more heavily white counties. Both the neoclassical economics of discrimination--with its individualistic "taste for discrimination"--and the stinging critique by Marshall in 1974 that such analysis ignores the important role of institutionalized racism--can "explain the empirical conclusions of this article." Traditional "smokestack-chasing" methods are by no means hopeless. While co-ops and community development corporation strategies can be combined with traditional methods, it is important that foundations, government agencies, anti-poverty programs, and black leadership also focus on projects to competitively attract jobs in the traditional fashion.

The Cognitive and Perceptual Laws of the Inclined Plane.

PubMed

Masin, Sergio Cesare

2016-09-01

The study explored whether laypersons correctly tacitly know Galileo's law of the inclined plane and what the basis of such knowledge could be. Participants predicted the time a ball would take to roll down a slope with factorial combination of ball travel distance and slope angle. The resulting pattern of factorial curves relating the square of predicted time to travel distance for each slope angle was identical to that implied by Galileo's law, indicating a correct cognitive representation of this law. Intuitive physics research suggests that this cognitive representation may result from memories of past perceptions of objects rolling down a slope. Such a basis and the correct cognitive representation of Galileo's law led to the hypothesis that Galileo's law is also perceptually represented correctly. To test this hypothesis, participants were asked to judge the perceived travel time of a ball actually rolling down a slope, with perceived travel distance and perceived slope angle varied in a factorial design. The obtained pattern of factorial curves was equal to that implied by Galileo's law, indicating that the functional relationships defined in this law were perceptually represented correctly. The results foster the idea that laypersons may tacitly know both linear and nonlinear multiplicative physical laws of the everyday world. As a practical implication, the awareness of this conclusion may help develop more effective methods for teaching physics and for improving human performance in the physical environment.

The role of psychosocial and physical work-related factors on the health-related quality of life of Iranian industrial workers.

PubMed

Mokarami, Hamidreza; Stallones, Lorann; Nazifi, Morteza; Taghavi, Sayed Mohammad

2016-10-17

The role of psychosocial and physical work factors in predicting health related quality of life (HRQOL) has not been investigated among Iranian industrial workers. The present study is designed to assess these relationships among Iranian workers from steel and cosmetic factories. A cross-sectional study was conducted among 280 workers from two factories. Psychosocial and physical work factors and HRQOL were measured by the Persian translations of the following questionnaires: Job Content Questionnaire (JCQ) and the World Health Organization Quality of Life-Brief (WHOQOL-Brief). An instrument was developed to assess socio-demographic, health, and other work-related factors. The data were analyzed using independent t-tests, Pearson product moment correlation and hierarchical multiple regression. Results revealed that the respondents generally had poor HRQOLs especially in the environmental domain. The steel factory workers who were exposed to higher levels of occupational risk factors suffered from poorer HRQOL compared to the cosmetic factory workers. The results of hierarchical regression for all participants revealed that social support, sleep quality, work schedule, smoking and exercise were significant predictors of all domains of HRQOL. To improve the worker's HRQOL, intervention programs should focus on promoting social support, sleep quality, exercise and smoking habits. Moreover, reducing hazardous work environments should be considered an important intervention to promote HRQOL.

Pulmonary functions in plastic factory workers: a preliminary study.

PubMed

Khaliq, Farah; Singh, Pawan; Chandra, Prakash; Gupta, Keshav; Vaney, Neelam

2011-01-01

Exposure to long term air pollution in the work environment may result in decreased lung functions and various other health problems. A significant occupational hazard to lung functions is experienced by plastic factory workers. The present study is planned to assess the pulmonary functions of workers in the plastic factory where recycling of pastic material was done. These workers were constantly exposed to fumes of various chemicals throughout the day. Thirty one workers of plastic factory were assessed for their pulmonary functions. Parameters were compared with 31 age and sex matched controls not exposed to the same environment. The pulmonary function tests were done using Sibelmed Datospir 120 B portable spirometer. A significant decrease in most of the flow rates (MEF 25%, MEF 50%, MEF 75% and FEF 25-75%) and most of the lung volumes and capacities (FVC, FEV1, VC, TV, ERV, MVV) were observed in the workers. Smoking and duration of exposure were not affecting the lung functions as the non smokers also showed a similar decrement in pulmonary functions. Similarly the workers working for less than 5 years also had decrement in pulmonary functions indicating that their lungs are being affected even if they have worked for one year. Exposure to the organic dust in the work environment should be controlled by adequate engineering measures, complemented by effective personal respiratory protection.

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach

PubMed Central

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Context: Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. Aims: This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Materials and Methods: Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts’ deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Statistical Analysis Used: Non-parametric tests and AHP approach using Expert Choice software. Results: The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution “controlling and improving the process in handling users complaints” is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Conclusions: Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to “services interaction.” As the results showed having “controlling and improving the process in handling users complaints” on the website is the first and most important one and the process of “changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula” is the least important one. PMID:25540790

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach.

PubMed

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts' deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Non-parametric tests and AHP approach using Expert Choice software. The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution "controlling and improving the process in handling users complaints" is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to "services interaction." As the results showed having "controlling and improving the process in handling users complaints" on the website is the first and most important one and the process of "changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula" is the least important one.

4. SOUTHEAST CORNER OF EDIBLE FATS FACTORY (CONNECTING BUILDING ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. SOUTHEAST CORNER OF EDIBLE FATS FACTORY (CONNECTING BUILDING ON THE LEFT) - Wilson's Oil House, Lard Refinery, & Edible Fats Factory, Edible Fats Factory, 2801 Southwest Fifteenth Street, Oklahoma City, Oklahoma County, OK

Construct Validity and Measurement Invariance of Computerized Adaptive Testing: Application to Measures of Academic Progress (MAP) Using Confirmatory Factor Analysis

ERIC Educational Resources Information Center

Wang, Shudong; McCall, Marty; Jiao, Hong; Harris, Gregg

2012-01-01

The purposes of this study are twofold. First, to investigate the construct or factorial structure of a set of Reading and Mathematics computerized adaptive tests (CAT), "Measures of Academic Progress" (MAP), given in different states at different grades and academic terms. The second purpose is to investigate the invariance of test…

A Confirmatory Factor Analysis of Cattell-Horn-Carroll Theory and Cross-Age Invariance of the Woodcock-Johnson Tests of Cognitive Abilities III

ERIC Educational Resources Information Center

Taub, Gordon E.; McGrew, Kevin S.

2004-01-01

Establishing an instrument's factorial invariance provides the empirical foundation to compare an individual's score across time or to examine the pattern of correlations between variables in differentiated age groups. In the recently published Woodcock-Johnson Tests of Cognitive Ability (WJ COG) and Achievement (WJ ACH) Third Edition (III) the…

The Math Essential Skills Screener--Upper Elementary Version (MESS-U): Studies of Reliability and Validity

ERIC Educational Resources Information Center

Erford, Bradley T.; Biddison, Amanda R.

2006-01-01

The Math Essential Skills Screener--Upper Elementary Version (MESS-U) is part of a series of screening tests designed to help identify students ages 9-11 who are at risk for mathematics failure. Internal consistency, test-retest reliability, item analysis, decision efficiency, convergent validity and factorial validity of the MESS-U were studied…

Asphaltic concrete overlays of rigid and flexible pavements : interim report No. 1.

DOT National Transportation Integrated Search

1977-09-01

This study evaluated the effect of a given thickness of asphaltic concrete overlay in rehabilitating 53 test sections conforming to the experiment design. This factorial design specified various levels of traffic intensity and overlay thickness for b...

Musk as a Pheromone? Didactic Exercise.

ERIC Educational Resources Information Center

Bersted, Chris T.

A classroom/laboratory exercise has been used to introduce college students to factorial research designs, differentiate between interpretations for experimental and quasi-experimental variables, and exemplify application of laboratory research methods to test practical questions (advertising claims). The exercise involves having randomly divided…

Replication of a Test-Retest Factorial Validity Study with the Piers-Harris Children's Self Concept Scale.

ERIC Educational Resources Information Center

Platten, Marvin R.; Williams, Larry R.

1981-01-01

This study largely replicates the findings of a previous study reported by the authors. Further research involving the physical dimension as a possible facet of general self-concept is suggested. (Author/BW)

LIMS user acceptance testing.

PubMed

Klein, Corbett S

2003-01-01

Laboratory Information Management Systems (LIMS) play a key role in the pharmaceutical industry. Thorough and accurate validation of such systems is critical and is a regulatory requirement. LIMS user acceptance testing is one aspect of this testing and enables the user to make a decision to accept or reject implementation of the system. This paper discusses key elements in facilitating the development and execution of a LIMS User Acceptance Test Plan (UATP).

First evidence of occupational asthma to argan powder in a cosmetic factory.

PubMed

Paris, C; Herin, F; Penven, E; Thaon, I; Richard, C; Jacquenet, S; Barbaud, A; Poussel, M

2016-04-01

Argan is used worldwide in numerous cosmetic products, as this fruit is supposed to have many beneficial properties on health. New cases of allergy can be expected with the growing use of argan. We investigated all workers (9) employed by a cosmetic factory and exposed to argan powder to identify possible allergies related to exposure to argan powder. Patients were investigated in the occupational disease department and, according to their symptoms, underwent pulmonary function testing, methacholine challenge, specific inhalation challenge to argan powder, skin prick tests, and immunoblotting analysis. We report three cases of occupational asthma to argan powder and a probable case of rhinitis. Fifteen argan proteins were recognized by the patients' IgE. Identification of proteins, cross-reactions to nuts, and ELISA inhibition tests suggested that some argan allergens can cross-react in vitro with hazelnut allergens, including 11S globulin and vicilin. High-level exposure to argan powder should be considered to be a potential cause of IgE-mediated allergy, and workers handling argan powder should be carefully investigated. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The Brazilian version of the effort-reward imbalance questionnaire to assess job stress.

PubMed

Chor, Dóra; Werneck, Guilherme Loureiro; Faerstein, Eduardo; Alves, Márcia Guimarães de Mello; Rotenberg, Lúcia

2008-01-01

The effort-reward imbalance (ERI) model has been used to assess the health impact of job stress. We aimed at describing the cross-cultural adaptation of the ERI questionnaire into Portuguese and some psychometric properties, in particular internal consistency, test-retest reliability, and factorial structure. We developed a Brazilian version of the ERI using a back-translation method and tested its reliability. The test-retest reliability study was conducted with 111 health workers and University staff. The current analyses are based on 89 participants, after exclusion of those with missing data. Reproducibility (interclass correlation coefficients) for the "effort", "'reward", and "'overcommitment"' dimensions of the scale was estimated at 0.76, 0.86, and 0.78, respectively. Internal consistency (Cronbach's alpha) estimates for these same dimensions were 0.68, 0.78, and 0.78, respectively. The exploratory factorial structure was fairly consistent with the model's theoretical components. We conclude that the results of this study represent the first evidence in favor of the application of the Brazilian Portuguese version of the ERI scale in health research in populations with similar socioeconomic characteristics.

Measurement Invariance of the Internet Addiction Test Among Hong Kong, Japanese, and Malaysian Adolescents.

PubMed

Lai, Ching-Man; Mak, Kwok-Kei; Cheng, Cecilia; Watanabe, Hiroko; Nomachi, Shinobu; Bahar, Norharlina; Young, Kimberly S; Ko, Huei-Chen; Kim, Dongil; Griffiths, Mark D

2015-10-01

There has been increased research examining the psychometric properties on the Internet Addiction Test (IAT) in different populations. This population-based study examined the psychometric properties and measurement invariance of the IAT in adolescents from three Asian countries. In the Asian Adolescent Risk Behavior Survey (AARBS), 2,535 secondary school students (55.9% girls) aged 12-18 years from Hong Kong (n=844), Japan (n=744), and Malaysia (n=947) completed a survey in 2012-2013 school year. A nested hierarchy of hypotheses concerning the IAT cross-country invariance was tested using multigroup confirmatory factor analyses. Replicating past findings in Hong Kong adolescents, the construct of the IAT is best represented by a second-order three-factor structure in Malaysian and Japanese adolescents. Configural, metric, scalar, and partial strict factorial invariance was established across the three samples. No cross-country differences on Internet addiction were detected at the latent mean level. This study provided empirical support for the IAT as a reliable and factorially stable instrument, and valid to be used across Asian adolescent populations.

Factorial analysis of diesel engine performance using different types of biofuels.

PubMed

Tashtoush, Ghassan M; Al-Widyan, Mohamad I; Albatayneh, Aiman M

2007-09-01

In this study, several bio-source-fuels like fresh and waste vegetable oil and waste animal fat were tested at different injector pressures (120, 140, 190, 210 bar) in a direct-injection, naturally aspirated, single-cylinder diesel engine with a design injection pressure of 190 bar. Using 2k factorial analysis, the effect of injection pressure (Pi) and fuel type on three engine parameters, namely, combustion efficiency (etac), mass fuel consumption (mf), and engine speed (N) was examined. It was found that Pi and fuel type significantly affected both etac and mf while they had a slight effect on engine speed. Moreover, with diesel and biodiesels, the etac increased to a maximum at 190 bar but declined at the higher Pi value. In contrast, higher Pi had a favorable effect on etac over the whole Pi range with all the other more viscous fuels tested. In addition, the mass fuel consumption consistently decreased with an increase in Pi for all the fuels including the baseline diesel fuel, with which the engine consistently attained higher etac and higher rpm compared to all the other fuels tested.

Environmental risk assessment of wastewaters from printed circuit board production: A multibiomarker approach using human cells.

PubMed

Gerić, Marko; Gajski, Goran; Oreščanin, Višnja; Domijan, Ana-Marija; Kollar, Robert; Garaj-Vrhovac, Vera

2017-02-01

Since the production of printed circuit boards (PCBs) generates wastewater contaminated with heavy metals and organic matter, PCB factories represent potential pollution sites. The wastewater toxicologically tested in this study contained several metals and the most abundant were copper and iron. At two exposure times tested (4 and 24 h) PCB wastewater (PCBW) proved to be cytotoxic (decreased cell viability) and genotoxic (increased comet assay tail intensity and tail moment) to human blood peripheral lymphocytes in vitro, and the oxidative stress parameter (malondialdehyde concentration) was also found to be higher. After application of combined treatment by waste base, ozone and waste sludge methods, concentrations of metals in purified PCBW were below the upper permitted levels and all tested toxicological parameters did not differ compared to the negative control. Taken together, similar methods could be implemented in PCB factories before discharging potentially toxic wastewater into the environment because purified PCBW does not represent a threat from the aspect of cytotoxicity and genotoxicity. Copyright © 2016 Elsevier Ltd. All rights reserved.

78 FR 38411 - Vogtle Electric Generating Plant, Unit 4; Inspections, Tests, Analyses, and Acceptance Criteria

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-26

... Plant, Unit 4; Inspections, Tests, Analyses, and Acceptance Criteria AGENCY: Nuclear Regulatory Commission. ACTION: Determination of inspections, tests, analyses, and acceptance criteria completion. SUMMARY: The U.S. Nuclear Regulatory Commission (NRC) staff has determined that the inspections, tests...

46 CFR 164.023-11 - Acceptance tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Acceptance tests. 164.023-11 Section 164.023-11 Shipping...: SPECIFICATIONS AND APPROVAL MATERIALS Thread for Personal Flotation Devices § 164.023-11 Acceptance tests. (a) Performance testing. Manufacturers shall ensure that the performance tests described in § 164.023-7 (a) or (b...

Cargo Movement Operations System (CMOS). Software Test Description

DTIC Science & Technology

1990-10-28

resulting in errors in paragraph numbers and titles. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION...location to test the update of the truck manifest. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION...CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [

Psychometrics of chronic liver disease questionnaire in Chinese chronic hepatitis B patients.

PubMed

Zhou, Kai-Na; Zhang, Min; Wu, Qian; Ji, Zhen-Hao; Zhang, Xiao-Mei; Zhuang, Gui-Hua

2013-06-14

To evaluate psychometrics of the Chinese (mainland) chronic liver disease questionnaire (CLDQ) in patients with chronic hepatitis B (CHB). A cross-sectional sample of 460 Chinese patients with CHB was selected from the Outpatient Department of the Eighth Hospital of Xi'an, including CHB (CHB without cirrhosis) (n = 323) and CHB-related cirrhosis (n = 137). The psychometrics includes reliability, validity and sensitivity. Internal consistency reliability was measured using Cronbach's α. Convergent and discriminant validity was evaluated by item-scale correlation. Factorial validity was explored by principal component analysis with varimax rotation. Sensitivity was assessed using Cohen's effect size (ES), and independent sample t test between CHB and CHB-related cirrhosis groups and between alanine aminotransferase (ALT) normal and abnormal groups after stratifying the disease (CHB and CHB-related cirrhosis). Internal consistency reliability of the CLDQ was 0.83 (range: 0.65-0.90). Most of the hypothesized item-scale correlations were 0.40 or over, and all of such hypothesized correlations were higher than the alternative ones, indicating satisfactory convergent and discriminant validity. Six factors were extracted after varimax rotation from the 29 items of CLDQ. The eligible Cohen's ES with statistically significant independent sample t test was found in the overall CLDQ and abdominal, systematic, activity scales (CHB vs CHB-related cirrhosis), and in the overall CLDQ and abdominal scale in the stratification of patients with CHB (ALT normal vs abnormal). The CLDQ has acceptable reliability, validity and sensitivity in Chinese (mainland) patients with CHB.

A novel finite element model of the ovine lumbar intervertebral disc with anisotropic hyperelastic material properties

PubMed Central

Galbusera, Fabio; Jonas, René; Schlager, Benedikt; Wilke, Hans-Joachim; Villa, Tomaso

2017-01-01

The Ovine spine is an accepted model to investigate the biomechanical behaviour of the human lumbar one. Indeed, the use of animal models for in vitro studies is necessary to investigate the mechanical behaviour of biological tissue, but needs to be reduced for ethical and social reasons. The aim of this study was to create a finite element model of the lumbar intervertebral disc of the sheep that may help to refine the understanding of parallel in vitro experiments and that can be used to predict when mechanical failure occurs. Anisotropic hyperelastic material properties were assigned to the annulus fibrosus and factorial optimization analyses were performed to find out the optimal parameters of the ground substance and of the collagen fibers. For the ground substance of the annulus fibrosus the investigation was based on experimental data taken from the literature, while for the collagen fibers tensile tests on annulus specimens were conducted. Flexibility analysis in flexion-extension, lateral bending and axial rotation were conducted. Different material properties for the anterior, lateral and posterior regions of the annulus were found. The posterior part resulted the stiffest region in compression whereas the anterior one the stiffest region in tension. Since the flexibility outcomes were in a good agreement with the literature data, we considered this model suitable to be used in conjunction with in vitro and in vivo tests to investigate the mechanical behaviour of the ovine lumbar disc. PMID:28472100

Validation of the Malay Version of the Parental Bonding Instrument among Malaysian Youths Using Exploratory Factor Analysis

PubMed Central

MUHAMMAD, Noor Azimah; SHAMSUDDIN, Khadijah; OMAR, Khairani; SHAH, Shamsul Azhar; MOHD AMIN, Rahmah

2014-01-01

Background: Parenting behaviour is culturally sensitive. The aims of this study were (1) to translate the Parental Bonding Instrument into Malay (PBI-M) and (2) to determine its factorial structure and validity among the Malaysian population. Methods: The PBI-M was generated from a standard translation process and comprehension testing. The validation study of the PBI-M was administered to 248 college students aged 18 to 22 years. Results: Participants in the comprehension testing had difficulty understanding negative items. Five translated double negative items were replaced with five positive items with similar meanings. Exploratory factor analysis showed a three-factor model for the PBI-M with acceptable reliability. Four negative items (items 3, 4, 8, and 16) and item 19 were omitted from the final PBI-M list because of incorrect placement or low factor loading (< 0.32). Out of the final 20 items of the PBI-M, there were 10 items for the care factor, five items for the autonomy factor and five items for the overprotection factor. All the items loaded positively on their respective factors. Conclusion: The Malaysian population favoured positive items in answering questions. The PBI-M confirmed the three-factor model that consisted of care, autonomy and overprotection. The PBI-M is a valid and reliable instrument to assess the Malaysian parenting style. Confirmatory factor analysis may further support this finding. Keywords: Malaysia, parenting, questionnaire, validity PMID:25977634

Clinical Laboratories – Production Factories or Specialized Diagnostic Centers

PubMed Central

Tóth, Judit

2016-01-01

Since a large proportion of medical decisions are based on laboratory results, clinical laboratories should meet the increasing demand of clinicians and their patients. Huge central laboratories may process over 10 million tests annually; they act as production factories, measuring emergency and routine tests with sufficient speed and accuracy. At the same time, they also serve as specialized diagnostic centers where well-trained experts analyze and interpret special test results. It is essential to improve and constantly monitor this complex laboratory service, by several methods. Sample transport by pneumatic tube system, use of an advanced laboratory information system and point-of-care testing may result in decreased total turnaround time. The optimization of test ordering may result in a faster and more cost-effective laboratory service. Autovalidation can save time for laboratory specialists, when the analysis of more complex results requires their attention. Small teams of experts responsible for special diagnostic work, and their interpretative reporting according to predetermined principles, may help to minimize subjectivity of these special reports. Although laboratory investigations have become so diversely developed in the past decades, it is essential that the laboratory can provide accurate results relatively quickly, and that laboratory specialists can support the diagnosis and monitoring of patients by adequate interpretation of esoteric laboratory methods. PMID:27683528

Fulfilling the law of a single independent variable and improving the result of mathematical educational research

NASA Astrophysics Data System (ADS)

Pardimin, H.; Arcana, N.

2018-01-01

Many types of research in the field of mathematics education apply the Quasi-Experimental method and statistical analysis use t-test. Quasi-experiment has a weakness that is difficult to fulfil “the law of a single independent variable”. T-test also has a weakness that is a generalization of the conclusions obtained is less powerful. This research aimed to find ways to reduce the weaknesses of the Quasi-experimental method and improved the generalization of the research results. The method applied in the research was a non-interactive qualitative method, and the type was concept analysis. Concepts analysed are the concept of statistics, research methods of education, and research reports. The result represented a way to overcome the weaknesses of quasi-Experiments and T-test. In addition, the way was to apply a combination of Factorial Design and Balanced Design, which the authors refer to as Factorial-Balanced Design. The advantages of this design are: (1) almost fulfilling “the low of single independent variable” so no need to test the similarity of the academic ability, (2) the sample size of the experimental group and the control group became larger and equal; so it becomes robust to deal with violations of the assumptions of the ANOVA test.

Radical is Temporary

NASA Technical Reports Server (NTRS)

Barrett, Larry

2004-01-01

I suspect that even if Ken had stayed on, we would have evolved to the state we're in right now. In terms of the nature of the work that we're doing, we've gone from development to maintenance, and so the project team needed to evolve to reflect that change. The analogy I use to describe Hubble is a data factory, and we provide the factory controller. The telescope takes in light and produces pictures, and we're the ones sending all of the control signals and monitoring the temperature, power, and voltages in the factory to make sure the production line is doing its job and that it's not reaching some sort of a stress point. That's basically it. We maintain the Hubble command and control system. I think we're still putting out a good quality product. We still meet our schedule and cost milestones. Every time we make a change to the ground system, we run a suite of tests to make sure that the system still runs as expected, and that it correctly controls the spacecraft. Other than that, provided the interfaces are controlled, everything is okay.

An empirical research on customer satisfaction study: a consideration of different levels of performance.

PubMed

Lee, Yu-Cheng; Wang, Yu-Che; Lu, Shu-Chiung; Hsieh, Yi-Fang; Chien, Chih-Hung; Tsai, Sang-Bing; Dong, Weiwei

2016-01-01

Customer satisfaction is the key factor for successful and depends highly on the behaviors of frontline service providers. Customers should be managed as assets, and that customers vary in their needs, preferences, and buying behavior. This study applied the Taiwan Customer Satisfaction Index model to a tourism factory to analyze customer satisfaction and loyalty. We surveyed 242 customers served by one tourism factory organizations in Taiwan. A partial least squares was performed to analyze and test the theoretical model. The results show that perceived quality had the greatest influence on the customer satisfaction for satisfied and dissatisfied customers. In addition, in terms of customer loyalty, the customer satisfaction is more important than image for satisfied and dissatisfied customers. The contribution of this paper is to propose two satisfaction levels of CSI models for analyzing customer satisfaction and loyalty, thereby helping tourism factory managers improve customer satisfaction effectively. Compared with traditional techniques, we believe that our method is more appropriate for making decisions about allocating resources and for assisting managers in establishing appropriate priorities in customer satisfaction management.

Impact of contextual factors and substance characteristics on perspectives toward cognitive enhancement.

PubMed

Sattler, Sebastian; Forlini, Cynthia; Racine, Eric; Sauer, Carsten

2013-01-01

Enhancing cognitive performance with substances--especially prescription drugs--is a fiercely debated topic among scholars and in the media. The empirical basis for these discussions is limited, given that the actual nature of factors that influence the acceptability of and willingness to use cognitive enhancement substances remains unclear. In an online factorial survey, contextual and substance-specific characteristics of substances that improve academic performance were varied experimentally and presented to respondents. Students in four German universities rated their willingness to use and moral acceptance of different substances for cognitive enhancement. We found that the overall willingness to use performance enhancing substances is low. Most respondents considered the use of these substances as morally unacceptable. Situational influences such as peer pressure, policies concerning substance use, relative performance level of peers, but also characteristics of the substance, such as perceptions of substance safety, shape the willingness and acceptability of using a substance to enhance academic performance. Among the findings is evidence of a contagion effect meaning that the willingness was higher when the respondents have more CE drug users in their social network. We also found deterrence effects from strong side effects of using the substance, as well as from policy regulations and sanctions. Regulations might activate social norms against usage and sanctions can be seen as costly to users. Moreover, enhancement substances seem to be most tempting to low performers to catch up with others compared to high performers. By identifying contextual factors and substance characteristics influencing the willingness and acceptability of cognitive enhancers, policy approaches could consider these insights to better manage the use of such substances.

46 CFR 162.050-1 - Scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Scope. 162.050-1 Section 162.050-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND... facility authorized to conduct approval tests; (5) Marking requirements; and (6) Factory inspection...

14 CFR 21.293 - Current records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... option authorization— (i) A technical data file that includes the type design drawings, specifications, reports on tests prescribed by this part, and the original type inspection report and amendments to that... his factory, for each product type certificated under a delegation option authorization, current...

Bicultural Advertising and Hispanic Acculturation

ERIC Educational Resources Information Center

Tsai, Wan-Hsiu Sunny; Li, Cong

2012-01-01

This study examined the moderating effects of acculturation modes (assimilated, integrated, and separated) on Hispanic consumers' responses to three advertising targeting strategies (Caucasian targeted, bicultural, and Hispanic targeted). The hypotheses were empirically tested in a 3 x 3 factorial experiment with 155 self-identified Hispanic adult…

The Addiction Severity Index: reliability and validity in a Dutch alcoholic population.

PubMed

DeJong, C A; Willems, J C; Schippers, G M; Hendriks, V M

1995-04-01

The Addiction Severity Index (ASI) was evaluated for its psychometric qualities in a Dutch alcoholic population admitted to an addiction treatment center in The Netherlands. Its factorial structure in this population was found to be consistent with the established six factor structure of the ASI. Reliability analysis revealed that the homogeneity of the subscales was acceptable with the exception of the Alcohol Scale. The six subscales were not highly intercorrelated. The results of this study indicate that the ASI is a useful instrument for the assessment of several problems associated with alcoholism. However, the Alcohol Scale appears to be limited as a diagnostic and research instrument in the field of inpatient treatment of alcohol dependence in The Netherlands.

40 CFR Appendix Xv to Part 86 - Procedure for Determining an Acceptable Exhaust Regeneration Durability-Data Test Schedule for...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Acceptable Exhaust Regeneration Durability-Data Test Schedule for Diesel Cycle Vehicles Equipped With... Appendix XV to Part 86—Procedure for Determining an Acceptable Exhaust Regeneration Durability-Data Test... = Total number of regeneration emission tests. (Subscript “s” refers to standard test schedule) 5. Refer...

40 CFR Appendix Xv to Part 86 - Procedure for Determining an Acceptable Exhaust Regeneration Durability-Data Test Schedule for...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Acceptable Exhaust Regeneration Durability-Data Test Schedule for Diesel Cycle Vehicles Equipped With... Appendix XV to Part 86—Procedure for Determining an Acceptable Exhaust Regeneration Durability-Data Test... = Total number of regeneration emission tests. (Subscript “s” refers to standard test schedule) 5. Refer...

40 CFR Appendix Xv to Part 86 - Procedure for Determining an Acceptable Exhaust Regeneration Durability-Data Test Schedule for...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Acceptable Exhaust Regeneration Durability-Data Test Schedule for Diesel Cycle Vehicles Equipped With... Appendix XV to Part 86—Procedure for Determining an Acceptable Exhaust Regeneration Durability-Data Test... = Total number of regeneration emission tests. (Subscript “s” refers to standard test schedule) 5. Refer...

Psychological, situational and application-related determinants of the intention to self-test: a factorial survey among students.

PubMed

Kuecuekbalaban, Pinar; Rostalski, Tim; Schmidt, Silke; Muehlan, Holger

2017-07-10

The Internet enables an unprecedented opportunity to access a broad range of self-tests (e.g. testing for HIV, cancer, hepatitis B/C), which can be conducted by lay consumers without the help of a health professional. However, there is only little knowledge about the determinants of the use of self-tests. Thus, the aims of this study were (1) to experimentally investigate the impact of situational and application-related characteristics on the intention to use a self-test (ST), compared to being tested by a health professional at home (HPH) or at a doctor's office (HPD), (2) to examine the applicability of social-cognitive health behaviour theories on self-testing, and (3) to explore the advantages of integrating technological affinity into social-cognitive health behaviour models to predict self-testing. In a factorial survey, 1248 vignettes were rated by 208 students. The core concepts of social-cognitive health behaviour theories, technological affinity, and different situational and application-related characteristics were investigated. Intention to ST was only predicted by the medical expertise of the tested person, while HPH and HPD were also associated with the application purpose of the test and the presence of an emotionally supporting person. Perceived severity and outcome-expectancy significantly predicted intention to self-test. Technological enthusiastic people had a higher intention to use a self-test. Intention to ST, HPH and HPD were predicted by different situational and application-related characteristics. Social-cognitive health behaviour theories can be applied to predict self-testing and do not need to be extended by technological affinity.

Computer experimental analysis of the CHP performance of a 100 kW e SOFC Field Unit by a factorial design

NASA Astrophysics Data System (ADS)

Calì, M.; Santarelli, M. G. L.; Leone, P.

Gas Turbine Technologies (GTT) and Politecnico di Torino, both located in Torino (Italy), have been involved in the design and installation of a SOFC laboratory in order to analyse the operation, in cogenerative configuration, of the CHP 100 kW e SOFC Field Unit, built by Siemens-Westinghouse Power Corporation (SWPC), which is at present (May 2005) starting its operation and which will supply electric and thermal power to the GTT factory. In order to take the better advantage from the analysis of the on-site operation, and especially to correctly design the scheduled experimental tests on the system, we developed a mathematical model and run a simulated experimental campaign, applying a rigorous statistical approach to the analysis of the results. The aim of this work is the computer experimental analysis, through a statistical methodology (2 k factorial experiments), of the CHP 100 performance. First, the mathematical model has been calibrated with the results acquired during the first CHP100 demonstration at EDB/ELSAM in Westerwoort. After, the simulated tests have been performed in the form of computer experimental session, and the measurement uncertainties have been simulated with perturbation imposed to the model independent variables. The statistical methodology used for the computer experimental analysis is the factorial design (Yates' Technique): using the ANOVA technique the effect of the main independent variables (air utilization factor U ox, fuel utilization factor U F, internal fuel and air preheating and anodic recycling flow rate) has been investigated in a rigorous manner. Analysis accounts for the effects of parameters on stack electric power, thermal recovered power, single cell voltage, cell operative temperature, consumed fuel flow and steam to carbon ratio. Each main effect and interaction effect of parameters is shown with particular attention on generated electric power and stack heat recovered.

16 CFR 1616.4 - Sampling and acceptance procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... specimen to one of the three samples. Test each set of three samples and accept or reject each seam design... all the test criteria of § 1616.3(b), accept the seam design. If one or more of the three additional.... Test the sets of three samples and accept or reject the type of trim and design on the same basis as...

16 CFR 1616.4 - Sampling and acceptance procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... specimen to one of the three samples. Test each set of three samples and accept or reject each seam design... all the test criteria of § 1616.3(b), accept the seam design. If one or more of the three additional.... Test the sets of three samples and accept or reject the type of trim and design on the same basis as...

16 CFR 1616.4 - Sampling and acceptance procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... specimen to one of the three samples. Test each set of three samples and accept or reject each seam design... all the test criteria of § 1616.3(b), accept the seam design. If one or more of the three additional.... Test the sets of three samples and accept or reject the type of trim and design on the same basis as...

The Australian Racism, Acceptance, and Cultural-Ethnocentrism Scale (RACES): item response theory findings.

PubMed

Grigg, Kaine; Manderson, Lenore

2016-03-17

Racism and associated discrimination are pervasive and persistent challenges with multiple cumulative deleterious effects contributing to inequities in various health outcomes. Globally, research over the past decade has shown consistent associations between racism and negative health concerns. Such research confirms that race endures as one of the strongest predictors of poor health. Due to the lack of validated Australian measures of racist attitudes, RACES (Racism, Acceptance, and Cultural-Ethnocentrism Scale) was developed. Here, we examine RACES' psychometric properties, including the latent structure, utilising Item Response Theory (IRT). Unidimensional and Multidimensional Rating Scale Model (RSM) Rasch analyses were utilised with 296 Victorian primary school students and 182 adolescents and 220 adults from the Australian community. RACES was demonstrated to be a robust 24-item three-dimensional scale of Accepting Attitudes (12 items), Racist Attitudes (8 items), and Ethnocentric Attitudes (4 items). RSM Rasch analyses provide strong support for the instrument as a robust measure of racist attitudes in the Australian context, and for the overall factorial and construct validity of RACES across primary school children, adolescents, and adults. RACES provides a reliable and valid measure that can be utilised across the lifespan to evaluate attitudes towards all racial, ethnic, cultural, and religious groups. A core function of RACES is to assess the effectiveness of interventions to reduce community levels of racism and in turn inequities in health outcomes within Australia.

V/STOLAND avionics system flight-test data on a UH-1H helicopter

NASA Technical Reports Server (NTRS)

Baker, F. A.; Jaynes, D. N.; Corliss, L. D.; Liden, S.; Merrick, R. B.; Dugan, D. C.

1980-01-01

The flight-acceptance test results obtained during the acceptance tests of the V/STOLAND (versatile simplex digital avionics system) digital avionics system on a Bell UH-1H helicopter in 1977 at Ames Research Center are presented. The system provides navigation, guidance, control, and display functions for NASA terminal area VTOL research programs and for the Army handling qualities research programs at Ames Research Center. The acceptance test verified system performance and contractual acceptability. The V/STOLAND hardware navigation, guidance, and control laws resident in the digital computers are described. Typical flight-test data are shown and discussed as documentation of the system performance at acceptance from the contractor.

[Utilization of feed energy by growing pigs. 3. Energy requirement for the growth and fattening of pigs].

PubMed

Hoffmann, L; Schiemann, R; Jentsch, W

1979-02-01

The test series for the investigation of the energy consumption of growing pigs of the breeds large white and improved land race pig as well as cross breeds of the two breeds in a total of 369 metabolism periods (as described in the first two pieces of information of this publication series -- Hoffmann and others, 1977 and Jentsch and Hoffmann, 1977) were statistically analysed for the purpose of the derivation of the energy requirement for maintenance and the partial energy requirement for growth in order to test the possibilities of the factorial analysis for the derivation of energy requirement values of growing pigs. The dependence of the maintenance requirement of growing pigs (investigations in the live weight range of 10 to 40 kg -- see 1st information--were made with boars those in the live weight range of 30 to 120 kg were made with gelded boars, 2nd information) on the live weight can best be characterised by applying a power exponent of 0,61 or 0,62 for the live weight. A definition is offered to be discussed for the energetic maintenance requirement of productive live stock and laboratory animals as a conventional value. The energy requirement values derived from the doubly-factorial statistical analysis show a satisfactory adaptation to the measured values as such concerning energy intake and observed growth performance of the test animals. The conclusion is drawn that the factorial analysis of the energy requirement (maintenance plus partial performances) results in a better estimate of the requirement of growing animals than the assessment according only to live weight and live weight increase without characterising the energy requirement for partial performances. This is important for the further working on and more exact definition of requirement norms.

The Walking Interventions Through Texting (WalkIT) Trial: Rationale, Design, and Protocol for a Factorial Randomized Controlled Trial of Adaptive Interventions for Overweight and Obese, Inactive Adults.

PubMed

Hurley, Jane C; Hollingshead, Kevin E; Todd, Michael; Jarrett, Catherine L; Tucker, Wesley J; Angadi, Siddhartha S; Adams, Marc A

2015-09-11

Walking is a widely accepted and frequently targeted health promotion approach to increase physical activity (PA). Interventions to increase PA have produced only small improvements. Stronger and more potent behavioral intervention components are needed to increase time spent in PA, improve cardiometabolic risk markers, and optimize health. Our aim is to present the rationale and methods from the WalkIT Trial, a 4-month factorial randomized controlled trial (RCT) in inactive, overweight/obese adults. The main purpose of the study was to evaluate whether intensive adaptive components result in greater improvements to adults' PA compared to the static intervention components. Participants enrolled in a 2x2 factorial RCT and were assigned to one of four semi-automated, text message-based walking interventions. Experimental components included adaptive versus static steps/day goals, and immediate versus delayed reinforcement. Principles of percentile shaping and behavioral economics were used to operationalize experimental components. A Fitbit Zip measured the main outcome: participants' daily physical activity (steps and cadence) over the 4-month duration of the study. Secondary outcomes included self-reported PA, psychosocial outcomes, aerobic fitness, and cardiorespiratory risk factors assessed pre/post in a laboratory setting. Participants were recruited through email listservs and websites affiliated with the university campus, community businesses and local government, social groups, and social media advertising. This study has completed data collection as of December 2014, but data cleaning and preliminary analyses are still in progress. We expect to complete analysis of the main outcomes in late 2015 to early 2016. The Walking Interventions through Texting (WalkIT) Trial will further the understanding of theory-based intervention components to increase the PA of men and women who are healthy, insufficiently active and are overweight or obese. WalkIT is one of the first studies focusing on the individual components of combined goal setting and reward structures in a factorial design to increase walking. The trial is expected to produce results useful to future research interventions and perhaps industry initiatives, primarily focused on mHealth, goal setting, and those looking to promote behavior change through performance-based incentives. ClinicalTrials.gov NCT02053259; https://clinicaltrials.gov/ct2/show/NCT02053259 (Archived by WebCite at http://www.webcitation.org/6b65xLvmg).

Myc Dynamically and Preferentially Relocates to a Transcription Factory Occupied by Igh

PubMed Central

Osborne, Cameron S; Chakalova, Lyubomira; Mitchell, Jennifer A; Horton, Alice; Wood, Andrew L; Bolland, Daniel J; Corcoran, Anne E; Fraser, Peter

2007-01-01

Transcription in mammalian nuclei is highly compartmentalized in RNA polymerase II-enriched nuclear foci known as transcription factories. Genes in cis and trans can share the same factory, suggesting that genes migrate to preassembled transcription sites. We used fluorescent in situ hybridization to investigate the dynamics of gene association with transcription factories during immediate early (IE) gene induction in mouse B lymphocytes. Here, we show that induction involves rapid gene relocation to transcription factories. Importantly, we find that the Myc proto-oncogene on Chromosome 15 is preferentially recruited to the same transcription factory as the highly transcribed Igh gene located on Chromosome 12. Myc and Igh are the most frequent translocation partners in plasmacytoma and Burkitt lymphoma. Our results show that transcriptional activation of IE genes involves rapid relocation to preassembled transcription factories. Furthermore, the data imply a direct link between the nonrandom interchromosomal organization of transcribed genes at transcription factories and the incidence of specific chromosomal translocations. PMID:17622196

The Beck Depression Inventory: Testing for Invariant Measurement and Structure across Gender for Nonclinical Adolescents.

ERIC Educational Resources Information Center

Byrne, Barbara M.; And Others

Extending the earlier work of B. M. Byrne and P. Baron (1990), the factorial invariance of the 21-item Beck Depression Inventory (BDI) was tested using 351 non-clinical adolescent males and 334 non-clinical adolescent females. All subjects were in grades 9 through 12 and attended the same secondary school in a large metropolitan area in central…

Effect of Formative and Ability Test Results on Early Learning of Students

ERIC Educational Resources Information Center

Kadir, Abdul; Ardi, Muhammad; Nurhayati, B.; Dirawan, Gufran Darma

2016-01-01

The objective of this study was to examine the relationship of formative tests to early learning ability of students in the science learning style. This research used an experimental method with a 2 x 2 factorial design. The participants comprised all the students in class VII of the Islamic Junior High School State of Kolaka, a total of 343…

An Investigation of the Factor Structure of the Torrance Tests of Creative Thinking

ERIC Educational Resources Information Center

Bart, William M.; Hokanson, Brad; Can, Iclal

2017-01-01

This study investigated the factorial structure of the Torrance Tests of Creative Thinking (TTCT) Figural Form A with an aim to find out whether the two-factor structure of creative thinking established by Kim and Kim, Cramond, and Bandalos holds true for the older participants. Data were gathered from 996 8th grade students and 748 11th grade…

Patient acceptance of non-invasive testing for fetal aneuploidy via cell-free fetal DNA.

PubMed

Vahanian, Sevan A; Baraa Allaf, M; Yeh, Corinne; Chavez, Martin R; Kinzler, Wendy L; Vintzileos, Anthony M

2014-01-01

To evaluate factors associated with patient acceptance of noninvasive prenatal testing for trisomy 21, 18 and 13 via cell-free fetal DNA. This was a retrospective study of all patients who were offered noninvasive prenatal testing at a single institution from 1 March 2012 to 2 July 2012. Patients were identified through our perinatal ultrasound database; demographic information, testing indication and insurance coverage were compared between patients who accepted the test and those who declined. Parametric and nonparametric tests were used as appropriate. Significant variables were assessed using multivariate logistic regression. The value p < 0.05 was considered significant. Two hundred thirty-five patients were offered noninvasive prenatal testing. Ninety-three patients (40%) accepted testing and 142 (60%) declined. Women who accepted noninvasive prenatal testing were more commonly white, had private insurance and had more than one testing indication. There was no statistical difference in the number or the type of testing indications. Multivariable logistic regression analysis was then used to assess individual variables. After controlling for race, patients with public insurance were 83% less likely to accept noninvasive prenatal testing than those with private insurance (3% vs. 97%, adjusted RR 0.17, 95% CI 0.05-0.62). In our population, having public insurance was the factor most strongly associated with declining noninvasive prenatal testing.

[Dissolution behavior of Fuzi Lizhong pill based on simultaneous determination of two components in Glycyrrhizae Radix et Rhizoma].

PubMed

Jiang, Mao-Yuan; Zhang, Zhen; Shi, Jin-Feng; Zhang, Jin-Ming; Fu, Chao-Mei; Lin, Xia; Liu, Yu-Mei

2018-03-01

To preliminarily investigate the dissolution behavior of Fuzi Lizhong pill, provide the basis for its quality control and lay foundation for in vivo dissolution behavior by determining the dissolution rate of liquiritin and glycyrrhizic acid. High-performance liquid chromatography (HPLC) method for simultaneous content determination of the two active ingredients of liquiritin and glycyrrhizic acid in Fuzi Lizhong pill was established; The dissolution amount of these two active ingredients in fifteen batches of Fuzi Lizhong pill from five manufacturers was obtained at different time points, and then the cumulative dissolution rate was calculated and cumulative dissolution curve was drawn. The similarity of cumulative dissolution curve of different batches was evaluated based on the same factory, and the similarity of cumulative dissolution curve of different factories was evaluated based on the same active ingredients. The dissolution model of Fuzi Lizhong pill based on two kinds of active ingredients was established by fitting with the dissolution data. The best dissolution medium was 0.25% sodium lauryl sulfate. The dissolution behavior of liquiritin and glycyrrhizic acid in Fuzi Lizhong pill was basically the same and sustained release in 48 h. Three batches of the factories (factory 2, factory 3, factory 4 and factory 5) appeared to be similar in dissolution behavior, indicating similarity in dissolution behavior in most factories. Two of the three batches from factory 1 appeared to be not similar in dissolution behavior of liquiritin and glycyrrhizic acid. The dissolution data of the effective ingredients from different factories were same in fitting, and Weibull model was the best model in these batches. Fuzi Lizhong pill in 15 batches from 5 factories showed sustained release in 48 h, proving obviously slow releasing characteristics "pill is lenitive and keeps a long-time efficacy". The generally good dissolution behavior also suggested that quality of different batches from most factories was stable. The dissolution behavior of liquiritin and glycyrrhizic acid in different factories was different, suggesting that the source of medicinal materials and preparation technology parameters in five factories were different. Copyright© by the Chinese Pharmaceutical Association.

Edible Film from the Pectin of Papaya Skin (The Study of Cassava Starch and Glycerol Addition)

NASA Astrophysics Data System (ADS)

Rosida; Sudaryati; Yahya, A. M.

2018-01-01

The production of edible cooking made from the pectin of papaya skin with cassava starch and glycerol adition had been studied. The usage of pectin of papaya skin was one way to use papaya skin waste in order to raise its economic value. The aim of this study was to study the effect of cassava starch and glycerol concentration on the product qualities and to determine the the best treatment in making a good quality adible film and acceptable by the consumer. This research used completely randomized design in factorial patern with two factors. The first factor was cassava starch concentration (25%, 35% and 45%) and the second factor was glycerol concentration (20 %, 15% and 10). The data were analyzed by Analysis of Variance (Anova) and Duncan’s Multiple Range Test to detect the difference between the treatment. The best treatment was 25% cassava starch addition and 10% glycerol concentration which produced edible film which had moisture content of 21.16%, thickness of 0.023 mm, tensile strength of 1.900 N, elasticity of 14.223%, and vapor transmission rate of 116.963 g/m2/24 hours. So the production of edible film from papaya skin pectin was potential to be developed.

[Creation of a scale for evaluating attitudes of partners toward alcohol dependency].

PubMed

Sugawara, Tazuko; Morita, Noriaki; Nakatani, Youji

2013-12-01

The aim of this study was to develop a scale to evaluate characteristics of how alcohol-dependent people perceive the attitudes of their partners toward alcohol dependency. Based on previous research, we created the "Attitudes of partners toward alcohol dependency" scale, from the perspective of the alcohol dependent individual. Using the new scale, 71 alcohol-dependent people (52 men, 19 women) were surveyed after obtaining their consent, and the reliability and validity of the scale were tested. The results identified 3 factors, "indifference", "acceptance" and "hypersensitivity", and factorial validity was verified. Relatively high reliability was obtained on each sub-scale (alpha = .60-.82). Furthermore, correlations were obtained with the alcohol-dependency "Denial and Awareness Scale (for alcohol-dependent people)" and with the 13-item "Usefulness of heterosexual love relations for recovery from alcohol dependency" questionnaire, which includes content on "beneficial" or "obstructive" to recovery, and with the satisfaction and the importance of relations. This demonstrates that the "Attitudes of partners toward alcohol dependency" scale has reliability and criterion-related validity. The scale facilitates evaluation of types of attitudes of partners toward alcohol dependency, and may thus be useful as one tool for investigating the influence of partners in heterosexual love relationships for recovery, and for providing advice.

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2013 CFR

2013-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2013-10-01 2013-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2012 CFR

2012-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2012-10-01 2012-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2014-10-01 2014-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2011-10-01 2011-10-01 false Pre-revenue service acceptance testing plan. 232...

Factors influencing acceptability of voluntary HIV testing among pregnant women in Gamboma, Republic of Congo.

PubMed

Ghoma-Linguissi, Laure Stella; Ebourombi, Dagene Fruinovy; Sidibe, Anissa; Kivouele, Thomas Serge; Vouvoungui, Jeannhey Christevy; Poulain, Pierre; Ntoumi, Francine

2015-11-06

This study was carried out to identify factors affecting the acceptability of voluntary HIV testing among pregnant women in a semi-rural city, Gamboma, Republic of Congo. A cross-sectional study was conducted between January and September 2012. Pregnant women attending antenatal heath care at an integrated health center were enrolled after informed consent and followed through voluntary HIV testing. Among 136 participants, 98 women (72 %) accepted voluntary HIV testing after pre-test counseling. Women with basic education, those who cited blood transfusion as a mode of transmission and prevention of mother-to-child transmission (MTCT) were more likely to accept testing as well those informed about free HIV testing. Interestingly, pregnant women who had heard about HIV/AIDS from hospital setting were less likely to accept testing. Our data indicate that increasing general education on HIV transmission/prevention modes is crucial for increasing acceptability of screening. Furthermore, HIV/AIDS knowledge disseminated to patients in hospital settings should be carefully monitored. Lastly, scaling-up MTCT services along with a better and larger community information, may address accessibility barriers observed in the present study.

Suomi Npp and Jpss Pre-Launch Test Data Collection and Archive

NASA Astrophysics Data System (ADS)

Denning, M.; Ullman, R.; Guenther, B.; Kilcoyne, H.; Chandler, C.; Adameck, J.

2012-12-01

During the development of each Suomi National Polar-orbiting Partnership (Suomi NPP) instrument, significant testing was performed, both in ambient and simulated orbital (thermal-vacuum) conditions, at the instrument factory, and again after integration with the spacecraft. The NPOESS Integrated Program Office (IPO), and later the NASA Joint Polar Satellite System (JPSS) Program Office, defined two primary objectives with respect to capturing instrument and spacecraft test data during these test events. The first objective was to disseminate test data and auxiliary documentation to an often distributed network of scientists to permit timely production of independent assessments of instrument performance, calibration, data quality, and test progress. The second goal was to preserve the data and documentation in a catalogued government archive for the life of the mission, to aid in the resolution of anomalies and to facilitate the comparison of on-orbit instrument operating characteristics to those observed prior to launch. In order to meet these objectives, Suomi NPP pre-launch test data collection, distribution, processing, and archive methods included adaptable support infrastructures to quickly and completely transfer test data and documentation from the instrument and spacecraft factories to sensor scientist teams on-site at the factory and around the country. These methods were unique, effective, and low in cost. These efforts supporting pre-launch instrument calibration permitted timely data quality assessments and technical feedback from contributing organizations within the government, academia, and industry, and were critical in supporting timely sensor development. Second, in parallel to data distribution to the sensor science teams, pre-launch test data were transferred and ingested into the central Suomi NPP calibration and validation (cal/val) system, known as the Government Resource for Algorithm Verification, Independent Testing, and Evaluation (GRAVITE), where they will reside for the life of the mission. As a result, data and documentation are available for query, analysis, and download by the cal/val community via the command-line GRAVITE Transfer Protocol (GTP) tool or via the NOAA-collaborative website "CasaNOSA". Instrument and spacecraft test data, telemetry, and ground support equipment information were collected and organized with detailed test procedures, logs, analyses, characterizations, and reports. This 45 Terabyte archive facilitates the comparison of on-orbit Suomi NPP operating characteristics with that observed prior to launch, and will serve as a resource to aid in the assessment of pre-launch JPSS-1 sensor performance. In summary, this paper will present the innovative pre-launch test data campaign infrastructures employed for Suomi NPP and planned for JPSS-1.

16 CFR § 1616.4 - Sampling and acceptance procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... specimen to one of the three samples. Test each set of three samples and accept or reject each seam design... all the test criteria of § 1616.3(b), accept the seam design. If one or more of the three additional.... Test the sets of three samples and accept or reject the type of trim and design on the same basis as...

Sequence Factorial and Its Applications

ERIC Educational Resources Information Center

Asiru, Muniru A.

2012-01-01

In this note, we introduce sequence factorial and use this to study generalized M-bonomial coefficients. For the sequence of natural numbers, the twin concepts of sequence factorial and generalized M-bonomial coefficients, respectively, extend the corresponding concepts of factorial of an integer and binomial coefficients. Some latent properties…

Skin diseases in workers at a perfume factory.

PubMed

Schubert, Hans-Jürgen

2006-08-01

The aim of this study is to find out the causes of skin diseases in one-third of the staff of a perfume factory, in which 10 different perfume sprays were being manufactured. Site inspection, dermatological examination and patch testing of all 26 persons at risk with 4 perfume oils and 30 ingredients of them. The results showed 6 bottlers were found suffering from allergic contact dermatitis, 2 from irritant contact dermatitis, 12 workers showed different strong reactions to various fragrances. The main causes of allergic contact dermatitis were 2 perfume oils (12 cases) and their ingredients geraniol (12 cases), benzaldehyde(9), cinnamic aldehyde (6), linalool, neroli oil, terpenes of lemon oil and orange oil (4 each). Nobody was tested positive to balsam of Peru. Job changes for office workers, packers or printers to other rooms, where they had no longer contact with fragrances, led to a settling. To conclude, automation and replacement of glass bottles by cartridges from non-fragile materials and using gloves may minimize the risk.

Preliminary development of the adolescent students' basic psychological needs at school scale.

PubMed

Tian, Lili; Han, Mengmeng; Huebner, E Scott

2014-04-01

The aim of the present study was to develop and provide evidence for the validity of a new measure of adolescent students' psychological need satisfaction at school, using a sample of Chinese students. We conducted four studies with four independent samples (total n = 1872). The first study aimed to develop items for the new instrument and to ascertain its factorial structure using exploratory factor analysis procedures. The second study aimed to examine the instrument's factorial structure using confirmatory factor analysis procedures as well as to assess its internal consistency reliability, convergent and divergent validity. The third study aimed to assess its measurement invariance across gender and age. The fourth study aimed to test its test-retest reliability over time and predictive validity. These preliminary results showed that the new instrument has promising psychometric properties. The potential contributions of the new instrument for future research and educational practices were discussed. Copyright © 2014 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Construct validity of the Italian version of the Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT) v2.0.

PubMed

Curci, Antonietta; Lanciano, Tiziana; Soleti, Emanuela; Zammuner, Vanda Lucia; Salovey, Peter

2013-01-01

In 2 studies, we assessed the construct validity of the Italian version of the Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT) version 2.0. In Study 1, we administered the MSCEIT together with measures of crystallized and fluid intelligence, personality, and affect. In Study 2, we administered the MSCEIT together with indexes of dispositional coping, emotion regulation strategies, alexithymia, state-trait anxiety, depression, and depressive rumination. We evaluated the factorial structure of the MSCEIT with a confirmatory factor analysis model using data combined from Study 1 and 2. The results confirm that the MSCEIT Italian version satisfactorily discriminates emotional intelligence ability from crystallized and fluid intelligence, personality, and affect, and exhibits significant correlations with various psychological well-being criteria. Furthermore, data from both studies confirm that the factorial structure of MSCEIT is consistent with the theory on which it is based, although it was difficult to rule out alternative structures.

105-KE Isolation Barrier Leak Rate Acceptance Test Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCracken, K.J.

1995-06-14

This Acceptance Test Report (ATR) contains the completed and signed Acceptance Procedure (ATP) for the 105-KE Isolations Barrier Leak Rate Test. The Test Engineer`s log, the completed sections of the ATP in the Appendix for Repeat Testing (Appendix K), the approved WHC J-7s (Appendix H), the data logger files (Appendices T and U), and the post test calibration checks (Appendix V) are included.

Investigation of cadmium pollution in the spruce saplings near the metal production factory.

PubMed

Hashemi, Seyed Armin; Farajpour, Ghasem

2016-02-01

Toxic metals such as lead and cadmium are among the pollutants that are created by the metal production factories and disseminated in the nature. In order to study the quantity of cadmium pollution in the environment of the metal production factories, 50 saplings of the spruce species at the peripheries of the metal production factories were examined and the samples of the leaves, roots, and stems of saplings planted around the factory and the soil of the environment of the factory were studied to investigate pollution with cadmium. They were compared to the soil and saplings of the spruce trees planted outside the factory as observer region. The results showed that the quantity of pollution in the leaves, stems, and roots of the trees planted inside the factory environment were estimated at 1.1, 1.5, and 2.5 mg/kg, respectively, and this indicated a significant difference with the observer region (p < 0.05). The quantity of cadmium in the soil of the peripheries of the metal production factory was estimated at 6.8 mg/kg in the depth of 0-10 cm beneath the level of the soil. The length of roots in the saplings planted around the factory of metal production stood at 11 and 14.5 cm in the observer region which had a significant difference with the observer region (p < 0.05). The quantity of soil resources and spruce species' pollution with cadmium in the region has been influenced by the production processes in the factory. © The Author(s) 2013.

Factor Structure of the Internet Addiction Test in Online Gamers and Poker Players

PubMed Central

Achab, Sophia; Billieux, Joel; Thorens, Gabriel; Zullino, Daniele; Dufour, Magali; Rothen, Stéphane

2015-01-01

Background The Internet Addiction Test (IAT) is the most widely used questionnaire to screen for problematic Internet use. Nevertheless, its factorial structure is still debated, which complicates comparisons among existing studies. Most previous studies were performed with students or community samples despite the probability of there being more problematic Internet use among users of specific applications, such as online gaming or gambling. Objective To assess the factorial structure of a modified version of the IAT that addresses specific applications, such as video games and online poker. Methods Two adult samples—one sample of Internet gamers (n=920) and one sample of online poker players (n=214)—were recruited and completed an online version of the modified IAT. Both samples were split into two subsamples. Two principal component analyses (PCAs) followed by two confirmatory factor analyses (CFAs) were run separately. Results The results of principal component analysis indicated that a one-factor model fit the data well across both samples. In consideration of the weakness of some IAT items, a 17-item modified version of the IAT was proposed. Conclusions This study assessed, for the first time, the factorial structure of a modified version of an Internet-administered IAT on a sample of Internet gamers and a sample of online poker players. The scale seems appropriate for the assessment of such online behaviors. Further studies on the modified 17-item IAT version are needed. PMID:26543917

Direct and conceptual replications of the taxometric analysis of type a behavior.

PubMed

Wilmot, Michael P; Haslam, Nick; Tian, Jingyuan; Ones, Deniz S

2018-05-17

We present direct and conceptual replications of the influential taxometric analysis of Type A Behavior (TAB; Strube, 1989), which reported evidence for the latent typology of the construct. Study 1, the direct replication (N = 2,373), duplicated sampling and methodological procedures of the original study, but results showed that the item indicators used in the original study lacked sufficient validity to unambiguously determine latent structure. Using improved factorial subscale indicators to further test the question, multiple taxometric procedures, in combination with parallel analyses of simulated data, failed to replicate the original typological finding. Study 2, the conceptual replication, tested the latent structure of the wider construct of TAB using the sample from the Caerphilly Prospective Study (N = 2,254), which contains responses to the three most widely used self-report measures of TAB: the Jenkins Activity Survey, Bortner scale, and Framingham scale. Factorial subscale indicators were derived from the measures and submitted to multiple taxometric procedures. Results of Study 2 converged with those of Study 1, providing clear evidence of latent dimensional structure. Overall, results suggest there is no evidence for the type in TAB. Findings imply that theoretical models of TAB, assessment practices, and data analytic procedures that assume a typology should be replaced by dimensional models, factorial subscale measures, and corresponding statistical approaches. Specific subscale measures that tap multiple Big Five trait domains, and show evidence of predictive utility, are also recommended. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Understanding patient acceptance and refusal of HIV testing in the emergency department

PubMed Central

2012-01-01

Background Despite high rates of patient satisfaction with emergency department (ED) HIV testing, acceptance varies widely. It is thought that patients who decline may be at higher risk for HIV infection, thus we sought to better understand patient acceptance and refusal of ED HIV testing. Methods In-depth interviews with fifty ED patients (28 accepters and 22 decliners of HIV testing) in three ED HIV testing programs that serve vulnerable urban populations in northern California. Results Many factors influenced the decision to accept ED HIV testing, including curiosity, reassurance of negative status, convenience, and opportunity. Similarly, a number of factors influenced the decision to decline HIV testing, including having been tested recently, the perception of being at low risk for HIV infection due to monogamy, abstinence or condom use, and wanting to focus on the medical reason for the ED visit. Both accepters and decliners viewed ED HIV testing favorably and nearly all participants felt comfortable with the testing experience, including the absence of counseling. While many participants who declined an ED HIV test had logical reasons, some participants also made clear that they would prefer not to know their HIV status rather than face psychosocial consequences such as loss of trust in a relationship or disclosure of status in hospital or public health records. Conclusions Testing for HIV in the ED as for any other health problem reduces barriers to testing for some but not all patients. Patients who decline ED HIV testing may have rational reasons, but there are some patients who avoid HIV testing because of psychosocial ramifications. While ED HIV testing is generally acceptable, more targeted approaches to testing are necessary for this subgroup. PMID:22214543

Understanding patient acceptance and refusal of HIV testing in the emergency department.

PubMed

Christopoulos, Katerina A; Weiser, Sheri D; Koester, Kimberly A; Myers, Janet J; White, Douglas A E; Kaplan, Beth; Morin, Stephen F

2012-01-03

Despite high rates of patient satisfaction with emergency department (ED) HIV testing, acceptance varies widely. It is thought that patients who decline may be at higher risk for HIV infection, thus we sought to better understand patient acceptance and refusal of ED HIV testing. In-depth interviews with fifty ED patients (28 accepters and 22 decliners of HIV testing) in three ED HIV testing programs that serve vulnerable urban populations in northern California. Many factors influenced the decision to accept ED HIV testing, including curiosity, reassurance of negative status, convenience, and opportunity. Similarly, a number of factors influenced the decision to decline HIV testing, including having been tested recently, the perception of being at low risk for HIV infection due to monogamy, abstinence or condom use, and wanting to focus on the medical reason for the ED visit. Both accepters and decliners viewed ED HIV testing favorably and nearly all participants felt comfortable with the testing experience, including the absence of counseling. While many participants who declined an ED HIV test had logical reasons, some participants also made clear that they would prefer not to know their HIV status rather than face psychosocial consequences such as loss of trust in a relationship or disclosure of status in hospital or public health records. Testing for HIV in the ED as for any other health problem reduces barriers to testing for some but not all patients. Patients who decline ED HIV testing may have rational reasons, but there are some patients who avoid HIV testing because of psychosocial ramifications. While ED HIV testing is generally acceptable, more targeted approaches to testing are necessary for this subgroup. © 2012 Christopoulos et al; licensee BioMed Central Ltd.

Improved management of acute kidney injury in primary care using e-alerts and an educational outreach programme.

PubMed

Tollitt, James; Flanagan, Emma; McCorkindale, Sheila; Glynn-Atkins, Sam; Emmett, Lauren; Darby, Denise; Ritchie, James; Bennett, Brandon; Sinha, Smeeta; Poulikakos, Dimitrios

2018-04-28

Acute kidney injury (AKI) detected in primary care is associated with increased morbidity and mortality. AKI electronic alerts (e-alerts) and educational programmes have recently been implemented but their contribution to improve AKI care is unknown. This project aimed to improve response to AKI detected in primary care and used a factorial design to evaluate the impact of the UK National Health Service (NHS) AKI e-alert and AKI educational outreach sessions on time to response to primary care AKI stages 2 and 3 between April and August 2016. A total of 46 primary care practices were randomized into four groups. A 2 × 2 factorial design exposed each group to different combinations of two interventions. The primary outcome was 'time to repeat test' or hospitalization following AKI e-alert for stages 2 and 3. Yates algorithm was used to evaluate the impact of each intervention. Time to response and mortality pre- and post-intervention were analysed using Mann-Whitney U test and chi-square test respectively. The factorial design included two interventions: an AKI educational outreach programme and the NHS AKI e-alerts. 1807 (0.8%) primary care blood tests demonstrated AKI 1-3 (78.3% stage 1, 14.8% stage 2, 6.9% stage 3). There were 391 stage 2 and 3 events from 251 patients. E-alerts demonstrated a reduction in mean response time (-29 hours). Educational outreach had a smaller effect (-3 hours). Median response time to AKI 2 and 3 pre- and post-interventions was 27 hours versus 16 hours respectively (P = 0.037). Stage 2 and 3 event-related 30-day all-cause mortality decreased following the interventions (15.6% versus 3.9% P = 0.036). AKI e-alerts in primary care hasten response to AKI 2 and 3 and reduce all-cause mortality. Educational outreach sessions further improve response time.

Occupational asthma in electronics workers caused by colophony fumes: follow-up of affected workers.

PubMed

Burge, P S

1982-05-01

Thirty-nine electronics workers were investigated by bronchial provocation testing to soldering fluxes containing colophony and were followed up one to four years later. At presentation and on follow-up each worker had nonspecific bronchial reactivity measured with inhaled histamine, and also had detailed measurements of lung function and estimation of total immunoglobulin levels. They completed a questionnaire designed to detect residual disability. The workers were divided into three groups. Twenty had left work after their initial diagnosis, eight had been moved to alternative work within their original factories, and 11 were thought to have asthma unrelated to colophony exposure as they failed to react to colophony at presentation. Histamine reactivity had returned to normal in half the workers who had left their original factories, but in only one worker who had moved within her original factory. This suggested that the nonspecific bronchial reactivity to histamine was the result rather than the cause of the occupational asthma, and that indirect exposure at work was sufficient to delay recovery of histamine reactivity. However, only two of the 20 affected workers who had left their original factories were symptom free on follow-up, and most had a considerable reduction in their quality of life by continuing asthma, which was particularly provoked by exercise, respiratory infections, and nonspecific irritants. Continuing symptoms may have been caused by domestic sources of colophony, or possibly the failure to eliminate colophony from the lungs.

Occupational asthma in electronics workers caused by colophony fumes: follow-up of affected workers.

PubMed Central

Burge, P S

1982-01-01

Thirty-nine electronics workers were investigated by bronchial provocation testing to soldering fluxes containing colophony and were followed up one to four years later. At presentation and on follow-up each worker had nonspecific bronchial reactivity measured with inhaled histamine, and also had detailed measurements of lung function and estimation of total immunoglobulin levels. They completed a questionnaire designed to detect residual disability. The workers were divided into three groups. Twenty had left work after their initial diagnosis, eight had been moved to alternative work within their original factories, and 11 were thought to have asthma unrelated to colophony exposure as they failed to react to colophony at presentation. Histamine reactivity had returned to normal in half the workers who had left their original factories, but in only one worker who had moved within her original factory. This suggested that the nonspecific bronchial reactivity to histamine was the result rather than the cause of the occupational asthma, and that indirect exposure at work was sufficient to delay recovery of histamine reactivity. However, only two of the 20 affected workers who had left their original factories were symptom free on follow-up, and most had a considerable reduction in their quality of life by continuing asthma, which was particularly provoked by exercise, respiratory infections, and nonspecific irritants. Continuing symptoms may have been caused by domestic sources of colophony, or possibly the failure to eliminate colophony from the lungs. PMID:7112471

Goddard Space Flight Center specification for Helical-Scan 8-millimeter (mm) magnetic digital data tape cartridge

NASA Technical Reports Server (NTRS)

Perry, Jimmy L.

1992-01-01

The same kind of standard and controls are established that are currently in use for the procurement of new analog, digital, and IBM/IBM compatible 3480 tape cartridges, and 1 in wide channel video magnetic tapes. The Magnetic Tape Certification Facility (MTCF) maintains a Qualified Products List (QPL) for the procurement of new magnetic media and uses the following specifications for the QPL and Acceptance Tests: (1) NASA TM-79724 is used for the QPL and Acceptance Testing of new analog magnetic tapes; (2) NASA TM-80599 is used for the QPL and Acceptance Testing of new digital magnetic tapes; (3) NASA TM-100702 is used for the QPL and Acceptance Testing of new IBM/IBM compatible 3840 magnetic tape cartridges; and (4) NASA TM-100712 is used for the QPL and Acceptance Testing of new 1 in wide channel video magnetic tapes. This document will be used for the QPL and Acceptance Testing of new Helical Scan 8 mm digital data tape cartridges.

From gene to structure: The protein factory of the NBICS Centre of Kurchatov Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyko, K. M.; Lipkin, A. V.; Popov, V. O., E-mail: vpopov@inbi.ras.ru

2013-05-15

The Protein Factory was established at the Centre for Nano, Bio, Info, Cognitive, and Social Sciences and Technologies (NBICS Centre) of the National Research Centre 'Kurchatov Institute' in 2010. The Protein Factory, together with the Centre for Synchrotron Radiation and Nanotechnology, promote research on structural biology. This paper presents the technology platforms developed at the Protein Factory and the facilities available for researchers. The main projects currently being performed at the Protein Factory are briefly described.

Parental feeding practices in families with children aged 2-13 years: Psychometric properties and child age-specific norms of the German version of the Child Feeding Questionnaire (CFQ).

PubMed

Schmidt, Ricarda; Richter, Robert; Brauhardt, Anne; Hiemisch, Andreas; Kiess, Wieland; Hilbert, Anja

2017-02-01

The Child Feeding Questionnaire (CFQ) is a self-report questionnaire for assessing parental attitudes to child weight and parental feeding practices. Previous evaluations of its psychometric properties were conducted primarily with small to medium-sized samples (N < 500) and a small range of children's age. The present study aims to analyze the psychometric properties of the CFQ in a large German community sample and, for the first time, to establish normative data. Within the population-based LIFE Child study, the CFQ was administered to N = 982 mothers of 2- to 13-year-old children. Psychometric analyses on item statistics and internal consistency were conducted. Using structural equation modeling, four empirically-based factorial models of the CFQ were evaluated, and measurement invariance across child age groups and sex was examined. Age-specific norms for the CFQ subscales were computed. Item statistics were highly favorable for the majority of items, but floor and ceiling effects were found for 14 of 31 items. Internal consistency of the CFQ subscales ranged from acceptable to excellent (0.71 ≤ α ≤ 0.91), except for the subscale Perceived Responsibility (α = 0.65). Regarding factorial validity, an eight-factor model with the newly created Reward subscale provided the best fit to the data. This model was factorial invariant across child sex and adjacent age groups. Maternal and child weight status showed large effects on CFQ subscale scores. The analyses established good psychometric properties for the German version of the CFQ and confirmed an eight-factor model. The provided norms allow for the comparison of individual parental feeding practices and change over time. The CFQ's sensitivity to change and longitudinal associations of parental feeding practices and child weight status warrant further research. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Rapid Integration and Test Environment: A Process for Achieving Software Test Acceptance

DTIC Science & Technology

2010-05-01

Test Environment : A Process for Achieving Software Test Acceptance 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...mlif`v= 365= k^s^i=mlpqdo^ar^qb=p`elli= The Rapid Integration and Test Environment : A Process for Achieving Software Test Acceptance Patrick V...was awarded the Bronze Star. Introduction The Rapid Integration and Test Environment (RITE) initiative, implemented by the Program Executive Office

On the factorial and construct validity of the Intrinsic Motivation Inventory: conceptual and operational concerns.

PubMed

Markland, D; Hardy, L

1997-03-01

The Intrinsic Motivation Inventory (IMI) has been gaining acceptance in the sport and exercise domain since the publication of research by McAuley, Duncan, and Tammen (1989) and McAuley, Wraith, and Duncan (1991), which reported confirmatory support for the factorial validity of a hierarchical model of intrinsic motivation. Authors of the present study argue that the results of these studies did not conclusively support the hierarchical model and that the model did not accurately reflect the tenets of cognitive evaluation theory (Deci & Ryan, 1985) from which the IMI is drawn. It is also argued that a measure of perceived locus of causality is required to model intrinsic motivation properly. The development of a perceived locus of causality for exercise scale is described, and alternative models, in which perceived competence and perceived locus of causality are held to have causal influences on intrinsic motivation, are compared with an oblique confirmatory factor analytic model in which the constructs are held at the same conceptual level. Structural equation modeling showed support for a causal model in which perceived locus of causality mediates the effects of perceived competence on pressure-tension, interest-enjoyment, and effort-importance. It is argued that conceptual and operational problems with the IMI, as currently used, should be addressed before it becomes established as the instrument of choice for assessing levels of intrinsic motivation.

Approaching the socialist factory and its workforce: considerations from fieldwork in (former) Yugoslavia

PubMed Central

Archer, Rory; Musić, Goran

2017-01-01

Abstract The socialist factory, as the ‘incubator’ of the new socialist (wo)man, is a productive entry point for the study of socialist modernization and its contradictions. By outlining some theoretical and methodological insights gathered through field-research in factories in former Yugoslavia, we seek to connect the state of labour history in the Balkans to recent breakthroughs made by labour historians of other socialist countries. The first part of this article sketches some of the specificities of the Yugoslav self-managed factory and its heterogeneous workforce. It presents the ambiguous relationship between workers and the factory and demonstrates the variety of life trajectories for workers in Yugoslav state-socialism (from model communists to alienated workers). The second part engages with the available sources for conducting research inside and outside the factory advocating an approach which combines factory and local archives, print media and oral history. PMID:28190894

Approaching the socialist factory and its workforce: considerations from fieldwork in (former) Yugoslavia.

PubMed

Archer, Rory; Musić, Goran

2017-01-01

The socialist factory, as the 'incubator' of the new socialist (wo)man, is a productive entry point for the study of socialist modernization and its contradictions. By outlining some theoretical and methodological insights gathered through field-research in factories in former Yugoslavia, we seek to connect the state of labour history in the Balkans to recent breakthroughs made by labour historians of other socialist countries. The first part of this article sketches some of the specificities of the Yugoslav self-managed factory and its heterogeneous workforce. It presents the ambiguous relationship between workers and the factory and demonstrates the variety of life trajectories for workers in Yugoslav state-socialism (from model communists to alienated workers). The second part engages with the available sources for conducting research inside and outside the factory advocating an approach which combines factory and local archives, print media and oral history.

Psychometric properties of the Spanish version of the mindful attention awareness scale (MAAS) in patients with fibromyalgia

PubMed Central

2013-01-01

Background Mindful-based interventions improve functioning and quality of life in fibromyalgia (FM) patients. The aim of the study is to perform a psychometric analysis of the Spanish version of the Mindful Attention Awareness Scale (MAAS) in a sample of patients diagnosed with FM. Methods The following measures were administered to 251 Spanish patients with FM: the Spanish version of MAAS, the Chronic Pain Acceptance Questionnaire, the Pain Catastrophising Scale, the Injustice Experience Questionnaire, the Psychological Inflexibility in Pain Scale, the Fibromyalgia Impact Questionnaire and the Euroqol. Factorial structure was analysed using Confirmatory Factor Analyses (CFA). Cronbach's α coefficient was calculated to examine internal consistency, and the intraclass correlation coefficient (ICC) was calculated to assess the test-retest reliability of the measures. Pearson’s correlation tests were run to evaluate univariate relationships between scores on the MAAS and criterion variables. Results The MAAS scores in our sample were low (M = 56.7; SD = 17.5). CFA confirmed a two-factor structure, with the following fit indices [sbX2 = 172.34 (p < 0.001), CFI = 0.95, GFI = 0.90, SRMR = 0.05, RMSEA = 0.06. MAAS was found to have high internal consistency (Cronbach’s α = 0.90) and adequate test-retest reliability at a 1–2 week interval (ICC = 0.90). It showed significant and expected correlations with the criterion measures with the exception of the Euroqol (Pearson = 0.15). Conclusion Psychometric properties of the Spanish version of the MAAS in patients with FM are adequate. The dimensionality of the MAAS found in this sample and directions for future research are discussed. PMID:23317306

Development and psychometric testing of a new geriatric spiritual well-being scale.

PubMed

Dunn, Karen S

2008-09-01

Aims and objectives.  Assess the psychometric properties of a new geriatric spiritual well-being scale (GSWS), specifically designed for older adults. Background.  Religiosity and spiritual wellness must be measured as two distinct concepts to prevent confounding them as synonymous among atheist and agnostic population. Design.  A test-retest survey design was used to estimate the psychometric properties. Methods.  A convenience sample of 138 community-dwelling older adults was drawn from the inner city of Detroit. Data were collected using telephone survey interviews. Data analyses included descriptive statistics, structural equation modelling, reliability analyses, and point-biserial correlations. Results.  The factorial validity of the proposed model was not supported by the data. Fit indices were χ(2)  = 185.98, d.f. = 98, P < 0.00, goodness-of-fit index of 0.85, comparative fit index of 0.87 and root mean error of approximation of 0.08, indicating a mediocre fit. Reliability statistics for the subscales ranged from being poor (0.36) to good (0.84) with an acceptable overall scale alpha of 0.76. Participants' performance stability and criterion-related validity were also supported. Conclusions.  The GSWS is an age-specific assessment tool that was developed specifically to address a population's cultural diversity. Future research endeavors will be to test the psychometric properties of this scale in culturally diverse older adult populations for further instrument development. Relevance to clinical practice.  Nurses need to recognize that agnostics/atheists have spiritual needs that do not include religious beliefs or practices. Thus, assessing patients' religious beliefs and practices prior to assessing spiritual well-being is essential to prevent bias. © 2008 The Author. Journal compilation © 2008 Blackwell Publishing Ltd.

Psychometric Properties of the Chinese Version of the Occupational Fatigue Exhaustion/Recovery Scale: A Test in a Nursing Population.

PubMed

Fang, Jin-Bo; Zhou, Chun-Fen; Huang, Jing; Qiu, Chang-Jian

2018-06-01

The Occupational Fatigue Exhaustion/Recovery Scale (OFER) was designed to assess occupational fatigue in nurses. Although the original English version of this instrument has shown high degrees of reliability and validity, a Chinese version of this scale has yet to be verified. The aim of this study was to evaluate the psychometric properties of the OFER in a population of Chinese nurses. The scale was translated using translation and back-translation. The validities and reliabilities were evaluated on 923 qualified participants using content validity index, concurrent validity, factorial validity, internal consistency reliability, and test-retest reliability. The content validity index for the OFER was .92. The correlation coefficients between the scores of the OFER subscales and the criteria in this study (varying from -.498 to .705) verified that the OFER has acceptable concurrent validity. Principal component analysis and confirmatory factor analysis revealed that three factors correspond to the structure of the original instrument and that recovery mediates the relationship between acute and chronic fatigue. The Cronbach's alpha for the chronic fatigue, acute fatigue, and intershift recovery subscales were .83, .85, and .86, respectively. Test-retest reliabilities with correlation coefficients from .61 to .78 were found in the three subscales. OFER is a reliable and valid instrument for assessing work-related fatigue in Chinese nurses. However, further improvement of the acute fatigue subscale is recommended. The OFER has the potential to elicit information that is useful for assessing fatigue in nurses in China. Furthermore, as it differentiates between acute and chronic fatigue, OFER may be an effective tool for guiding the development and implementation of various, related intervention measures.

Final Assembly and Factory Testing of the Jefferson Lab SHMS Spectrometer Quadrupole and Dipole Superconducting Magnets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brindza, Paul; Lassiter, Steven; Sun, Eric

Jefferson Lab is constructing an 11 Gev/c electron spectrometer called the Super High Momentum Spectrometer (SHMS) as part of the 12 GeV JLAB upgrade for experimental Hall C. Three of the five superconducting(SC) SHMS magnets are under construction at SigmaPhi in Vannes France as a result of an international competition for design and fabrication. The three magnets Q2 and Q3 60 cm bore quadrupoles and the 60 cm warm bore dipole are complete or near complete and have many design features in common. All three magnets share a common superconductor, collaring system, cryostat design, cold to warm support, cryogenic interface,more » burnout resistant current leads, DC power supply, quench protection, instrumentation and controls. The three magnets are collared, installed in cryostats and welded up and in various stages of final testing. The Q2 quadrupole is due to ship from France to America in August arriving during this ASC conference and has passed all final hipot, leak and pressure tests. The dipole is in leak and pressure testing as of July 2016 while the Q3 quadrupole requires some outer vacuum vessel assembly. Delivery of the Q3 and Dipole magnets will follow the Q2 at about 1 month intervals. Lastly, factory testing have included hipot and electrical tests, magnetic tests at low field, mechanical alignments to center the coils, leak tests and ASME Code required pressure tests. Upon installation in Hall C at JLAB cold testing will commence.« less

Final Assembly and Factory Testing of the Jefferson Lab SHMS Spectrometer Quadrupole and Dipole Superconducting Magnets

DOE PAGES

Brindza, Paul; Lassiter, Steven; Sun, Eric; ...

2017-06-01

Jefferson Lab is constructing an 11 Gev/c electron spectrometer called the Super High Momentum Spectrometer (SHMS) as part of the 12 GeV JLAB upgrade for experimental Hall C. Three of the five superconducting(SC) SHMS magnets are under construction at SigmaPhi in Vannes France as a result of an international competition for design and fabrication. The three magnets Q2 and Q3 60 cm bore quadrupoles and the 60 cm warm bore dipole are complete or near complete and have many design features in common. All three magnets share a common superconductor, collaring system, cryostat design, cold to warm support, cryogenic interface,more » burnout resistant current leads, DC power supply, quench protection, instrumentation and controls. The three magnets are collared, installed in cryostats and welded up and in various stages of final testing. The Q2 quadrupole is due to ship from France to America in August arriving during this ASC conference and has passed all final hipot, leak and pressure tests. The dipole is in leak and pressure testing as of July 2016 while the Q3 quadrupole requires some outer vacuum vessel assembly. Delivery of the Q3 and Dipole magnets will follow the Q2 at about 1 month intervals. Lastly, factory testing have included hipot and electrical tests, magnetic tests at low field, mechanical alignments to center the coils, leak tests and ASME Code required pressure tests. Upon installation in Hall C at JLAB cold testing will commence.« less

The Virtual Factory Teaching System (VFTS): Project Review and Results.

ERIC Educational Resources Information Center

Kazlauskas, E. J.; Boyd, E. F., III; Dessouky, M. M.

This paper presents a review of the Virtual Factory Teaching (VFTS) project, a Web-based, multimedia collaborative learning network. The system allows students, working alone or in teams, to build factories, forecast demand for products, plan production, establish release rules for new work into the factory, and set scheduling rules for…

Sequence Factorial of "g"-Gonal Numbers

ERIC Educational Resources Information Center

Asiru, Muniru A.

2013-01-01

The gamma function, which has the property to interpolate the factorial whenever the argument is an integer, is a special case (the case "g"?=?2) of the general term of the sequence factorial of "g"-gonal numbers. In relation to this special case, a formula for calculating the general term of the sequence factorial of any…

A survey of airborne and skin exposures to chemicals in footwear and equipment factories in Thailand.

PubMed

Todd, Lori A; Mottus, Kathleen; Mihlan, Gary J

2008-03-01

This research reports on a pilot industrial hygiene study that was performed at four footwear factories and two equipment factories in Thailand. Workers in these factories were exposed through inhalation and dermal contact to a large number of organic vapors from solvents and cements that were hand applied. In addition, these workers were exposed to highly toxic isocyanates primarily through the dermal route. A total of 286 personal air samples were obtained at the four footwear factories using organic vapor monitors; individual job tasks were monitored using a real-time MIRAN Spectrometer. A total of 64 surface, tool, or hand samples were monitored for isocyanates using surface contamination detectors. Real-time measurements were also obtained for organic vapors in two equipment factories. From 8% to 21% of the workers sampled in each footwear factory were overexposed to mixtures of chemicals from solvents and cements. Up to 100% of the workers performing specific job tasks were overexposed to mixtures of chemicals. From 39% to 69% of the surface samples were positive for unreacted isocyanates. Many of the real-time measurements obtained in the equipment factories exceeded occupational exposure limits. Personal protective equipment and engineering controls were inadequate in all of the factories.

D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

EPA Science Inventory

Humans are exposed to mixtures of environmental compounds. A regulatory assumption is that the mixtures of chemicals act in an additive manner. However, this assumption requires experimental validation. Traditional experimental designs (full factorial) require a large number of e...

D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

EPA Science Inventory

Traditional factorial designs for evaluating interactions among chemicals in a mixture are prohibitive when the number of chemicals is large. However, recent advances in statistically-based experimental design have made it easier to evaluate interactions involving many chemicals...

Reliability and Factorial Validity of the Artes de Lenguaje.

ERIC Educational Resources Information Center

Powers, Stephen; And Others

1984-01-01

Spanish speaking first graders were administered the Artes de Lenguage (ADL)--a Spanish, criterion-referenced, language arts test. Reliability analyses indicated the adequacy of three of the four subscales (Phonetic Analysis, Vocabulary Development, Comprehension Skills, and General Skills). A principal factors analysis of the intercorrelation…

How Patient Interactions With a Computer-Based Video Intervention Affect Decisions to Test for HIV.

PubMed

Aronson, Ian David; Rajan, Sonali; Marsch, Lisa A; Bania, Theodore C

2014-06-01

The current study examines predictors of HIV test acceptance among emergency department patients who received an educational video intervention designed to increase HIV testing. A total of 202 patients in the main treatment areas of a high-volume, urban hospital emergency department used inexpensive netbook computers to watch brief educational videos about HIV testing and respond to pre-postintervention data collection instruments. After the intervention, computers asked participants if they would like an HIV test: Approximately 43% (n = 86) accepted. Participants who accepted HIV tests at the end of the intervention took longer to respond to postintervention questions, which included the offer of an HIV test, F(1, 195) = 37.72, p < .001, compared with participants who did not accept testing. Participants who incorrectly answered pretest questions about HIV symptoms were more likely to accept testing F(14, 201) = 4.48, p < .001. White participants were less likely to accept tests than Black, Latino, or "Other" patients, χ(2)(3, N = 202) = 10.39, p < .05. Time spent responding to postintervention questions emerged as the strongest predictor of HIV testing, suggesting that patients who agreed to test spent more time thinking about their response to the offer of an HIV test. Examining intervention usage data, pretest knowledge deficits, and patient demographics can potentially inform more effective behavioral health interventions for underserved populations in clinical settings. © 2013 Society for Public Health Education.

How Patient Interactions With a Computer-Based Video Intervention Affect Decisions to Test for HIV

PubMed Central

Aronson, Ian David; Rajan, Sonali; Marsch, Lisa A.; Bania, Theodore C.

2014-01-01

The current study examines predictors of HIV test acceptance among emergency department patients who received an educational video intervention designed to increase HIV testing. A total of 202 patients in the main treatment areas of a high-volume, urban hospital emergency department used inexpensive netbook computers to watch brief educational videos about HIV testing and respond to pre–postintervention data collection instruments. After the intervention, computers asked participants if they would like an HIV test: Approximately 43% (n = 86) accepted. Participants who accepted HIV tests at the end of the intervention took longer to respond to postintervention questions, which included the offer of an HIV test, F(1, 195) = 37.72, p < .001, compared with participants who did not accept testing. Participants who incorrectly answered pretest questions about HIV symptoms were more likely to accept testing F(14, 201) = 4.48, p < .001. White participants were less likely to accept tests than Black, Latino, or “Other” patients, χ2(3, N = 202) = 10.39, p < .05. Time spent responding to postintervention questions emerged as the strongest predictor of HIV testing, suggesting that patients who agreed to test spent more time thinking about their response to the offer of an HIV test. Examining intervention usage data, pretest knowledge deficits, and patient demographics can potentially inform more effective behavioral health interventions for underserved populations in clinical settings. PMID:24225031

Does open-air exposure to volatile organic compounds near a plastic recycling factory cause health effects?

PubMed

Yorifuji, Takashi; Noguchi, Miyuki; Tsuda, Toshihide; Suzuki, Etsuji; Takao, Soshi; Kashima, Saori; Yanagisawa, Yukio

2012-01-01

After a plastic reprocessing factory began to operate in August 2004, the residents around the factory in Neyagawa, Osaka, Japan, began to complain of symptoms. Therefore, we conducted an exposure assessment and a population-based epidemiological study in 2006. To assess exposure, volatile organic compounds (VOCs) and total VOCs were measured at two locations in the vicinity of the factory. In the population-based study, a total of 3,950 residents were targeted. A self-administered questionnaire was used to collect information about subjects' mucocutaneous or respiratory symptoms. Using logistic regression models, we compared the prevalence of symptoms in July 2006 by employing the farthest area from the factory as a reference, and prevalence odds ratios (PORs) and their 95% confidence intervals (CIs) were estimated. The concentration of total VOCs was higher in the vicinity of the factory. The prevalence of mucocutaneous and respiratory symptoms was the highest among the residents in the closest area to the factory. Some symptoms were significantly increased among the residents within 500 m of the factory compared with residents of an area 2800 m from the factory: e.g., sore throat (POR=3.2, 95% CI: 1.3-8.0), eye itch (POR=3.0, 95% CI: 1.5-6.0), eye discharge (POR=6.0, 95% CI: 2.3-15.9), eczema (POR=3.0, 95% CI: 1.1-7.9) and sputum (POR=2.4, 95% CI: 1.1-5.1). Despite of the limitations of this study, these results imply a possible association of open-air VOCs with mucocutaneous and respiratory symptoms. Because this kind of plasticre cycling factory only recently came into operation, more attention should be paid to the operation of plastic recycling factories in the environment.

Efficiency in Complexity: Composition and Dynamic Nature of Mimivirus Replication Factories

PubMed Central

Milrot, Elad; Mutsafi, Yael; Ben-Dor, Shifra; Levin, Yishai; Savidor, Alon; Kartvelishvily, Elena

2016-01-01

ABSTRACT The recent discovery of multiple giant double-stranded DNA (dsDNA) viruses blurred the consensual distinction between viruses and cells due to their size, as well as to their structural and genetic complexity. A dramatic feature revealed by these viruses as well as by many positive-strand RNA viruses is their ability to rapidly form elaborate intracellular organelles, termed “viral factories,” where viral progeny are continuously generated. Here we report the first isolation of viral factories at progressive postinfection time points. The isolated factories were subjected to mass spectrometry-based proteomics, bioinformatics, and imaging analyses. These analyses revealed that numerous viral proteins are present in the factories but not in mature virions, thus implying that multiple and diverse proteins are required to promote the efficiency of viral factories as “production lines” of viral progeny. Moreover, our results highlight the dynamic and highly complex nature of viral factories, provide new and general insights into viral infection, and substantiate the intriguing notion that viral factories may represent the living state of viruses. IMPORTANCE Large dsDNA viruses such as vaccinia virus and the giant mimivirus, as well as many positive-strand RNA viruses, generate elaborate cytoplasmic organelles in which the multiple and diverse transactions required for viral replication and assembly occur. These organelles, which were termed “viral factories,” are attracting much interest due to the increasing realization that the rapid and continuous production of viral progeny is a direct outcome of the elaborate structure and composition of the factories, which act as efficient production lines. To get new insights into the nature and function of viral factories, we devised a method that allows, for the first time, the isolation of these organelles. Analyses of the isolated factories generated at different times postinfection by mass spectrometry-based proteomics provide new perceptions of their role and reveal the highly dynamic nature of these organelles. PMID:27581975

A Factorial Analysis of Variance and Resulting Norm Tables for Tennessee Head Start Children Based on the Developmental Test of Visual-Motor Integration.

ERIC Educational Resources Information Center

Nye, Barbara A.

Data from a statewide screening of Tennessee Head Start children on the Developmental Test of Visual-Motor Integration (VMI) are analyzed in this report for two purposes: to determine whether sex, race, and residence have a significant influence on visual motor development as measured by the VMI, and to develop VMI norms for the Tennessee Head…

AGOR 28: SIO Shipyard Representative Bi-Weekly Progress Report

DTIC Science & Technology

2015-10-23

constant tension operation. These items will be rechecked next week. 3 • Red Fox MSD – Tested and Commissioned by vendor...No operational issues, however both overboarding pumps had cracked housings. Vendor suspects factory defect and is replace with new. MSD ...593-001-3 MSD System Operational Test 10/6 422-001-3 Navigation Signal & Search Light Demonstration 10/9. 573-001-2 125% & 100 % Portable Crane 10/12

A holistic measurement model of movement competency in children.

PubMed

Rudd, J; Butson, M L; Barnett, L; Farrow, D; Berry, J; Borkoles, E; Polman, R

2016-01-01

Different countries have different methods for assessing movement competence in children; however, it is unclear whether the test batteries that are used measure the same aspects of movement competence. The aim of this paper was to (1) investigate whether the Test of Gross Motor Development (TGMD-2) and Körperkoordinations Test für Kinder (KTK) measure the same aspects of children's movement competence and (2) examine the factorial structure of the TGMD-2 and KTK in a sample of Australian children. A total of 158 children participated (M age = 9.5; SD = 2.2). First, confirmatory factor analysis examined the independent factorial structure of the KTK and TGMD-2. Second, it was investigated whether locomotor, object control and body coordination loaded on the latent variable Movement Competency. Confirmatory factor analysis indicated an adequate fit for both the KTK and TGMD-2. An adequate fit was also achieved for the final model. In this model, locomotor (r = .86), object control (r = .71) and body coordination (r = .52) loaded on movement competence. Findings support our hypothesis that the TGMD-2 and KTK measure discrete aspects of movement competence. Future researchers and practitioners should consider using a wider range of test batteries to assess movement competence.

Validation of the Spanish Addiction Severity Index Multimedia Version (S-ASI-MV).

PubMed

Butler, Stephen F; Redondo, José Pedro; Fernandez, Kathrine C; Villapiano, Albert

2009-01-01

This study aimed to develop and test the reliability and validity of a Spanish adaptation of the ASI-MV, a computer administered version of the Addiction Severity Index, called the S-ASI-MV. Participants were 185 native Spanish-speaking adult clients from substance abuse treatment facilities serving Spanish-speaking clients in Florida, New Mexico, California, and Puerto Rico. Participants were administered the S-ASI-MV as well as Spanish versions of the general health subscale of the SF-36, the work and family unit subscales of the Social Adjustment Scale Self-Report, the Michigan Alcohol Screening Test, the alcohol and drug subscales of the Personality Assessment Inventory, and the Hopkins Symptom Checklist-90. Three-to-five-day test-retest reliability was examined along with criterion validity, convergent/discriminant validity, and factorial validity. Measurement invariance between the English and Spanish versions of the ASI-MV was also examined. The S-ASI-MV demonstrated good test-retest reliability (ICCs for composite scores between .59 and .93), criterion validity (rs for composite scores between .66 and .87), and convergent/discriminant validity. Factorial validity and measurement invariance were demonstrated. These results compared favorably with those reported for the original interviewer version of the ASI and the English version of the ASI-MV.

Nevada Test Site Waste Acceptance Criteria (NTSWAC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NNSA /NSO Waste Management Project

This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

Face Validity of Test and Acceptance of Generalized Personality Interpretations

ERIC Educational Resources Information Center

Delprato, Dennis J.

1975-01-01

The degree to which variations in the face validity of psychological tests affected students' willingness to accept personality interpretations was studied. Acceptance of personality interpretations was compared for four types of tests which varied in face validity. The relationship between judged accuracy and rated likability of the…

Oxygen index: An approximate value for the evaluation of combustion characteristics

NASA Technical Reports Server (NTRS)

Zartmann, I.; Reinwardt, D.; Franke, A.

1986-01-01

The oxygen index has gained international recognition for the determination of combustion characteristics of plastic material. The amounts of oxygen and nitrogen were more accurately determined for existing test equipment in order to specify the oxygen index as precisely and as reproducible as possible. Parameters are outlined such as the size of the ignition flame, ignition of test pieces, test piece sizes and test temperature. The minimum oxygen index was determined by the dimension and duration of the fire. The results are sufficiently accurate for factory operating conditions and are also reproducible.

Survey of the prevalence and methodology of quality assurance for B-mode ultrasound image quality among veterinary sonographers.

PubMed

Hoscheit, Larry P; Heng, Hock Gan; Lim, Chee Kin; Weng, Hsin-Yi

2018-05-01

Image quality in B-mode ultrasound is important as it reflects the diagnostic accuracy and diagnostic information provided during clinical scanning. Quality assurance programs for B-mode ultrasound systems/components are comprised of initial quality acceptance testing and subsequent regularly scheduled quality control testing. The importance of quality assurance programs for B-mode ultrasound image quality using ultrasound phantoms is well documented in the human medical and medical physics literature. The purpose of this prospective, cross-sectional, survey study was to determine the prevalence and methodology of quality acceptance testing and quality control testing of image quality for ultrasound system/components among veterinary sonographers. An online electronic survey was sent to 1497 members of veterinary imaging organizations: the American College of Veterinary Radiology, the Veterinary Ultrasound Society, and the European Association of Veterinary Diagnostic Imaging, and a total of 167 responses were received. The results showed that the percentages of veterinary sonographers performing quality acceptance testing and quality control testing are 42% (64/151; 95% confidence interval 34-52%) and 26% (40/156: 95% confidence interval 19-33%) respectively. Of the respondents who claimed to have quality acceptance testing or quality control testing of image quality in place for their ultrasound system/components, 0% have performed quality acceptance testing or quality control testing correctly (quality acceptance testing 95% confidence interval: 0-6%, quality control testing 95% confidence interval: 0-11%). Further education and guidelines are recommended for veterinary sonographers in the area of quality acceptance testing and quality control testing for B-mode ultrasound equipment/components. © 2018 American College of Veterinary Radiology.

76 FR 77175 - New York Fun Factory Fireworks Display, Western Long Island Sound; Mamaroneck, NY

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-12

...-AA00 New York Fun Factory Fireworks Display, Western Long Island Sound; Mamaroneck, NY AGENCY: Coast... in support of the New York Fun Factory Fireworks display. This action is necessary to provide for the... the Coast Guard to define regulatory safety zones. On May 10, 2012 New York Fun Factory Events is...

Cryogenics for the MuCool Test Area (MTA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Darve, Christine; Norris, Barry; Pei, Liu-Jin

2005-09-01

MuCool Test Area (MTA) is a complex of buildings at Fermi National Accelerator Laboratory, which are dedicated to operate components of a cooling cell to be used for Muon Collider and Neutrino Factory R&D. The long-term goal of this facility is to test ionization cooling principles by operating a 25-liter liquid hydrogen (LH{sub 2}) absorber embedded in a 5 Tesla superconducting solenoid magnet. The MTA solenoid magnet will be used with RF cavities exposed to a high intensity beam. Cryogens used at the MTA include LHe, LN{sub 2} and LH{sub 2}. The latter dictates stringent system design for hazardous locations.more » The cryogenic plant is a modified Tevatron refrigerator based on the Claude cycle. The implementation of an in-house refrigerator system and two 300 kilowatt screw compressors is under development. The helium refrigeration capacity is 500 W at 14 K. In addition the MTA solenoid magnet will be batch-filled with LHe every 2 days using the same cryo-plant. This paper reviews cryogenic systems used to support the Muon Collider and Neutrino Factory R&D programs and emphasizes the feasibility of handling cryogenic equipment at MTA in a safe manner.« less

Cryogenics for the MuCool Test Area (MTA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Darve, Christine; Norris, Barry; Pei, Liujin

2006-03-20

MuCool Test Area (MTA) is a complex of buildings at Fermi National Accelerator Laboratory, which are dedicated to operate components of a cooling cell to be used for Muon Collider and Neutrino Factory R and D. The long-term goal of this facility is to test ionization cooling principles by operating a 25-liter liquid hydrogen (LH2) absorber embedded in a 5 Tesla superconducting solenoid magnet. The MTA solenoid magnet will be used with RF cavities exposed to a high intensity beam. Cryogens used at the MTA include LHe, LN2 and LH2. The latter dictates stringent system design for hazardous locations. Themore » cryogenic plant is a modified Tevatron refrigerator based on the Claude cycle. The implementation of an in-house refrigerator system and two 300 kilowatt screw compressors is under development. The helium refrigeration capacity is 500 W at 14 K. In addition the MTA solenoid magnet will be batch-filled with LHe every 2 days using the same cryo-plant. This paper reviews cryogenic systems used to support the Muon Collider and Neutrino Factory R and D programs and emphasizes the feasibility of handling cryogenic equipment at MTA in a safe manner.« less

Testing whether decision aids introduce cognitive biases: results of a randomized trial.

PubMed

Ubel, Peter A; Smith, Dylan M; Zikmund-Fisher, Brian J; Derry, Holly A; McClure, Jennifer; Stark, Azadeh; Wiese, Cheryl; Greene, Sarah; Jankovic, Aleksandra; Fagerlin, Angela

2010-08-01

Women at high risk of breast cancer face a difficult decision whether to take medications like tamoxifen to prevent a first breast cancer diagnosis. Decision aids (DAs) offer a promising method of helping them make this decision. But concern lingers that DAs might introduce cognitive biases. We recruited 663 women at high risk of breast cancer and presented them with a DA designed to experimentally test potential methods of identifying and reducing cognitive biases that could influence this decision, by varying specific aspects of the DA across participants in a factorial design. Participants were susceptible to a cognitive bias - an order effect - such that those who learned first about the risks of tamoxifen thought more favorably of the drug than women who learned first about the benefits. This order effect was eliminated among women who received additional information about competing health risks. We discovered that the order of risk/benefit information influenced women's perceptions of tamoxifen. This bias was eliminated by providing contextual information about competing health risks. We have demonstrated the feasibility of using factorial experimental designs to test whether DAs introduce cognitive biases, and whether specific elements of DAs can reduce such biases. Published by Elsevier Ireland Ltd.

Personal experiences and emotionality in health-related knowledge exchange in Internet forums: a randomized controlled field experiment comparing responses to facts vs personal experiences.

PubMed

Kimmerle, Joachim; Bientzle, Martina; Cress, Ulrike

2014-12-04

On the Internet, people share personal experiences as well as facts and objective information. This also holds true for the exchange of health-related information in a variety of Internet forums. In online discussions about health topics, both fact-oriented and strongly personal contributions occur on a regular basis. In this field experiment, we examined in what way the particular type of contribution (ie, factual information vs personal experiences) has an impact on the subsequent communication in health-related Internet forums. For this purpose, we posted parallelized queries to 28 comparable Internet forums; queries were identical with regard to the information contained but included either fact-oriented descriptions or personal experiences related to measles vaccination. In the factual information condition, we posted queries to the forums that contained the neutral summary of a scientific article. In the personal experiences condition, we posted queries to the forums that contained the same information as in the first condition, but were framed as personal experiences We found no evidence that personal experiences evoked more responses (mean 3.79, SD 3.91) from other members of the Internet forums than fact-oriented contributions (mean 2.14, SD 2.93, t26=0.126, P=.219). But personal experiences elicited emotional replies (mean 3.17, SD 1.29) from other users to a greater extent than fact-oriented contributions (mean 2.13, SD 1.29, t81=3.659, P<.001). We suggest that personal experiences elicited more emotional replies due to the process of emotional anchoring of people's own style of communication. We recommend future studies should aim at testing the hypotheses with more general and with less emotionally charged topics, constructing different fact-oriented posts, and examining additional potential factors of influence such as personality factors or particular communication situations.

FINE PARTICULATE MATTER (PM) AND ORGANIC SPECIATION OF FIREPLACE EMISSIONS

EPA Science Inventory

This paper presents a summary of fireplace particle size and organic speciation data gathered to date in an on-going project. Tests are being conducted in a residential wood combustion (RWC) laboratory on three factory-built fireplaces. RWC wood smoke particles <10?m (PM10) con...

Using Symbolic-Logic Matrices To Improve Confirmatory Factor Analysis Techniques.

ERIC Educational Resources Information Center

Creighton, Theodore B.; Coleman, Donald G.; Adams, R. C.

A continuing and vexing problem associated with survey instrument development is the creation of items, initially, that correlate favorably a posteriori with constructs being measured. This study tests the use of symbolic-logic matrices developed by D. G. Coleman (1979) in creating factorially "pure" statistically discrete constructs in…

Factorial Validity of the Reynolds Intellectual Assessment Scales for Referred Students

ERIC Educational Resources Information Center

Beaujean, A. Alexander; McGlaughlin, Sean M.; Margulies, Allison S.

2009-01-01

The Reynolds Intellectual Assessment Scales (RIAS) is a recently developed, individually administered psychometric instrument designed to measure general cognitive ability, as well as verbal (crystallized) intelligence, nonverbal (fluid) intelligence, and memory. Test reviewers have recommended the use of the RIAS despite the fact that, although…

A Study of Item Bias for Attitudinal Measurement Using Maximum Likelihood Factor Analysis.

ERIC Educational Resources Information Center

Mayberry, Paul W.

A technique for detecting item bias that is responsive to attitudinal measurement considerations is a maximum likelihood factor analysis procedure comparing multivariate factor structures across various subpopulations, often referred to as SIFASP. The SIFASP technique allows for factorial model comparisons in the testing of various hypotheses…

The volatilization of SPLAT® for use in pheromone mating disruption of cranberry pests

USDA-ARS?s Scientific Manuscript database

The paraffin-based pheromone carrier, SPLAT, was tested for its volatilization rate. A multi-factorial study was initiated to examine the interactive effects of point-source size, shape, and duration. The study showed that tremendous amounts of the pheromone were released early, followed by a gradua...

29 CFR 1910.164 - Fire detection systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... fire detectors and fire detection systems are tested and adjusted as often as needed to maintain proper reliability and operating condition except that factory calibrated detectors need not be adjusted after...) The employer shall also assure that fire detectors that need to be cleaned of dirt, dust, or other...

29 CFR 1910.164 - Fire detection systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... fire detectors and fire detection systems are tested and adjusted as often as needed to maintain proper reliability and operating condition except that factory calibrated detectors need not be adjusted after...) The employer shall also assure that fire detectors that need to be cleaned of dirt, dust, or other...

29 CFR 1910.164 - Fire detection systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... fire detectors and fire detection systems are tested and adjusted as often as needed to maintain proper reliability and operating condition except that factory calibrated detectors need not be adjusted after...) The employer shall also assure that fire detectors that need to be cleaned of dirt, dust, or other...

29 CFR 1910.164 - Fire detection systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... fire detectors and fire detection systems are tested and adjusted as often as needed to maintain proper reliability and operating condition except that factory calibrated detectors need not be adjusted after...) The employer shall also assure that fire detectors that need to be cleaned of dirt, dust, or other...

29 CFR 1910.164 - Fire detection systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... fire detectors and fire detection systems are tested and adjusted as often as needed to maintain proper reliability and operating condition except that factory calibrated detectors need not be adjusted after...) The employer shall also assure that fire detectors that need to be cleaned of dirt, dust, or other...

Validation of the Child Sport Cohesion Questionnaire

ERIC Educational Resources Information Center

Martin, Luc J.; Carron, Albert V.; Eys, Mark A.; Loughead, Todd

2013-01-01

The purpose of the present study was to test the validity evidence of the Child Sport Cohesion Questionnaire (CSCQ). To accomplish this task, convergent, discriminant, and known-group difference validity were examined, along with factorial validity via confirmatory factor analysis (CFA). Child athletes (N = 290, M[subscript age] = 10.73 plus or…

Career Concerns, Values, and Role Salience in Employed Men.

ERIC Educational Resources Information Center

Duarte, M. Eduarda

1995-01-01

Tests Super's model of career adaptability by examining the relationship between career development concerns, values, and role salience among cement factory workers (n=881). They responded to the Adult Career Concerns Inventory, the Values Inventory, and the Salience Inventory. Results supported both Super's model of career adaptation and his…

Feedback and Sentence Learning.

ERIC Educational Resources Information Center

Guthrie, John T.

The theoretical functions of external feedback in SR and closed loop models of verbal learning are presented. Contradictory predictions from the models are tested with a three by three factorial experiment including three types of feedback and three amounts of rehearsal. There were 90 adult students run individually and they were required to learn…

Psychometric Properties of the Revised Mathematics Anxiety Rating Scale

ERIC Educational Resources Information Center

Baloglu, Mustafa; Zelhart, Paul F.

2007-01-01

An exploratory factor analysis and several confirmatory analyses were performed to evaluate the factorial structure of the Revised Mathematics Anxiety Rating Scale (RMARS) through the responses of 805 college students. On 559 students' scores, the instrument's construct validity was tested through a confirmatory factor analysis (CFA) and was found…

An Investigation of Calculus Learning Using Factorial Modeling.

ERIC Educational Resources Information Center

Dick, Thomas P.; Balomenos, Richard H.

Structural covariance models that would explain the correlations observed among mathematics achievement and participation measures and related cognitive and affective variables were developed. A sample of college calculus students (N=268; 124 females and 144 males) was administered a battery of cognitive tests (including measures of spatial-visual…

Factorial Structure of the Anxiety Control Questionnaire in Chinese Adolescents

ERIC Educational Resources Information Center

Shujuan, Wang; Meihua, Qian; Jianxin, Zhang

2009-01-01

This article examines the psychometric structure of the Anxiety Control Questionnaire (ACQ) in Chinese adolescents. With the data collected from 212 senior high school students (94 females, 110 males, 8 unknown), seven models are tested using confirmatory factor analyses in the framework of the multitrait-multimethod strategy. Results indicate…

Development of a Culturally Valid Counselor Burnout Inventory for Korean Counselors

ERIC Educational Resources Information Center

Yu, Kumlan; Lee, Sang Min; Nesbit, Elisabeth A.

2008-01-01

This article describes the development of the culturally valid Counselor Burnout Inventory. A multistage approach including item translation; item refinement; and evaluation of factorial validity, reliability, and score validity was used to test constructs and validation. Implications for practice and future research are discussed. (Contains 3…

Principals' Learning Mechanisms: Exploring an Emerging Construct

ERIC Educational Resources Information Center

Schechter, Chen; Qadach, Mowafaq

2016-01-01

This exploration of principal learning mechanisms (PLM) to support a learning-centered school aimed to develop, field-test, and validate a PLM-measuring instrument. Following exploratory and confirmatory factor analyses of items to examine factorial validity, the developed scale was correlated with other work-related established constructs (e.g.,…

Knowledge sharing to facilitate regulatory decision-making in regard to alternatives to animal testing: Report of an EPAA workshop.

PubMed

Ramirez, Tzutzuy; Beken, Sonja; Chlebus, Magda; Ellis, Graham; Griesinger, Claudius; De Jonghe, Sandra; Manou, Irene; Mehling, Annette; Reisinger, Kerstin; Rossi, Laura H; van Benthem, Jan; van der Laan, Jan Willem; Weissenhorn, Renate; Sauer, Ursula G

2015-10-01

The European Partnership for Alternative Approaches to Animal Testing (EPAA) convened a workshop Knowledge sharing to facilitate regulatory decision-making. Fifty invited participants from the European Commission, national and European agencies and bodies, different industry sectors (chemicals, cosmetics, fragrances, pharmaceuticals, vaccines), and animal protection organizations attended the workshop. Four case studies exemplarily revealed which procedures are in place to obtain regulatory acceptance of new test methods in different sectors. Breakout groups discussed the status quo identifying the following facilitators for regulatory acceptance of alternatives to animal testing: Networking and communication (including cross-sector collaboration, international cooperation and harmonization); involvement of regulatory agencies from the initial stages of test method development on; certainty on prerequisites for test method acceptance including the establishment of specific criteria for regulatory acceptance. Data sharing and intellectual property issues affect many aspects of test method development, validation and regulatory acceptance. In principle, all activities should address replacement, reduction and refinement methods (albeit animal testing is generally prohibited in the cosmetics sector). Provision of financial resources and education support all activities aiming at facilitating the acceptance and use of alternatives to animal testing. Overall, workshop participants recommended building confidence in new methodologies by applying and gaining experience with them. Copyright © 2015 Elsevier Inc. All rights reserved.

Quality-control issues on high-resolution diagnostic monitors.

PubMed

Parr, L F; Anderson, A L; Glennon, B K; Fetherston, P

2001-06-01

Previous literature indicates a need for more data collection in the area of quality control of high-resolution diagnostic monitors. Throughout acceptance testing, which began in June 2000, stability of monitor calibration was analyzed. Although image quality on all monitors was found to be acceptable upon initial acceptance testing using VeriLUM software by Image Smiths, Inc (Germantown, MD), it was determined to be unacceptable during the clinical phase of acceptance testing. High-resolution monitors were evaluated for quality assurance on a weekly basis from installation through acceptance testing and beyond. During clinical utilization determination (CUD), monitor calibration was identified as a problem and the manufacturer returned and recalibrated all workstations. From that time through final acceptance testing, high-resolution monitor calibration and monitor failure rate remained a problem. The monitor vendor then returned to the site to address these areas. Monitor defocus was still noticeable and calibration checks were increased to three times per week. White and black level drift on medium-resolution monitors had been attributed to raster size settings. Measurements of white and black level at several different size settings were taken to determine the effect of size on white and black level settings. Black level remained steady with size change. White level appeared to increase by 2.0 cd/m2 for every 0.1 inches decrease in horizontal raster size. This was determined not to be the cause of the observed brightness drift. Frequency of calibration/testing is an issue in a clinical environment. The increased frequency required at our site cannot be sustained. The medical physics division cannot provide dedicated personnel to conduct the quality-assurance testing on all monitors at this interval due to other physics commitments throughout the hospital. Monitor access is also an issue due to radiologists' need to read images. Some workstations are in use 7 AM to 11 PM daily. An appropriate monitor calibration frequency must be established during acceptance testing to ensure unacceptable drift is not masked by excessive calibration frequency. Standards for acceptable black level and white level drift also need to be determined. The monitor vendor and hospital staff agree that currently, very small printed text is an acceptable method of determining monitor blur, however, a better method of determining monitor blur is being pursued. Although monitors may show acceptable quality during initial acceptance testing, they need to show sustained quality during the clinical acceptance-testing phase. Defocus, black level, and white level are image quality concerns, which need to be evaluated during the clinical phase of acceptance testing. Image quality deficiencies can have a negative impact on patient care and raise serious medical-legal concerns. The attention to quality control required of the hospital staff needs to be realistic and not have a significant impact on radiology workflow.

Factorial Design Approach in Proportioning Prestressed Self-Compacting Concrete.

PubMed

Long, Wu-Jian; Khayat, Kamal Henri; Lemieux, Guillaume; Xing, Feng; Wang, Wei-Lun

2015-03-13

In order to model the effect of mixture parameters and material properties on the hardened properties of, prestressed self-compacting concrete (SCC), and also to investigate the extensions of the statistical models, a factorial design was employed to identify the relative significance of these primary parameters and their interactions in terms of the mechanical and visco-elastic properties of SCC. In addition to the 16 fractional factorial mixtures evaluated in the modeled region of -1 to +1, eight axial mixtures were prepared at extreme values of -2 and +2 with the other variables maintained at the central points. Four replicate central mixtures were also evaluated. The effects of five mixture parameters, including binder type, binder content, dosage of viscosity-modifying admixture (VMA), water-cementitious material ratio (w/cm), and sand-to-total aggregate ratio (S/A) on compressive strength, modulus of elasticity, as well as autogenous and drying shrinkage are discussed. The applications of the models to better understand trade-offs between mixture parameters and carry out comparisons among various responses are also highlighted. A logical design approach would be to use the existing model to predict the optimal design, and then run selected tests to quantify the influence of the new binder on the model.

Study of Montmorillonite Clay for the Removal of Copper (II) by Adsorption: Full Factorial Design Approach and Cascade Forward Neural Network

PubMed Central

Turan, Nurdan Gamze; Ozgonenel, Okan

2013-01-01

An intensive study has been made of the removal efficiency of Cu(II) from industrial leachate by biosorption of montmorillonite. A 24 factorial design and cascade forward neural network (CFNN) were used to display the significant levels of the analyzed factors on the removal efficiency. The obtained model based on 24 factorial design was statistically tested using the well-known methods. The statistical analysis proves that the main effects of analyzed parameters were significant by an obtained linear model within a 95% confidence interval. The proposed CFNN model requires less experimental data and minimum calculations. Moreover, it is found to be cost-effective due to inherent advantages of its network structure. Optimization of the levels of the analyzed factors was achieved by minimizing adsorbent dosage and contact time, which were costly, and maximizing Cu(II) removal efficiency. The suggested optimum conditions are initial pH at 6, adsorbent dosage at 10 mg/L, and contact time at 10 min using raw montmorillonite with the Cu(II) removal of 80.7%. At the optimum values, removal efficiency was increased to 88.91% if the modified montmorillonite was used. PMID:24453833

Statistical analysis of the factors that influenced the mechanical properties improvement of cassava starch films

NASA Astrophysics Data System (ADS)

Monteiro, Mayra; Oliveira, Victor; Santos, Francisco; Barros Neto, Eduardo; Silva, Karyn; Silva, Rayane; Henrique, João; Chibério, Abimaelle

2017-08-01

In order to obtain cassava starch films with improved mechanical properties in relation to the synthetic polymer in the packaging production, a complete factorial design 23 was carried out in order to investigate which factor significantly influences the tensile strength of the biofilm. The factors to be investigated were cassava starch, glycerol and modified clay contents. Modified bentonite clay was used as a filling material of the biofilm. Glycerol was the plasticizer used to thermoplastify cassava starch. The factorial analysis suggested a regression model capable of predicting the optimal mechanical property of the cassava starch film from the maximization of the tensile strength. The reliability of the regression model was tested by the correlation established with the experimental data through the following statistical analyse: Pareto graph. The modified clay was the factor of greater statistical significance on the observed response variable, being the factor that contributed most to the improvement of the mechanical property of the starch film. The factorial experiments showed that the interaction of glycerol with both modified clay and cassava starch was significant for the reduction of biofilm ductility. Modified clay and cassava starch contributed to the maximization of biofilm ductility, while glycerol contributed to the minimization.

The assessment of the impact of socio-economic factors in accepting cancer using the Acceptance of Illness Scale (AIS).

PubMed

Czerw, Aleksandra I; Bilińska, Magdalena; Deptała, Andrzej

2016-01-01

The paper presents the results of examining the level of acceptance of the illness in cancer patients using the Acceptance of Illness Scale (AIS). The study involved cancer patients treated at the Central Clinical Hospital of the Ministry the Interior in Warsaw in 2014. The questionnaire comprised basic demographic questions (socio-economic factors) and the AIS test estimating the level of illness acceptance in patients. For the group of patients in the research group, the arithmetic mean amounted to 27.56 points. The period of time that elapsed between the first cancer diagnosis and the start of the study did not influence the score of accepting illness. The acceptance of illness in patients diagnosed with metastases differed from the acceptance of illness by patients diagnosed with metastatic cancer. Females obtained the average of 29.59 in the AIS test, whereas the average in male patients was 26.17. The patients' age did not impact the AIS test. There were no differences in the AIS test results between a group of people with secondary education and a group of people with higher education. There were no differences in the AIS test results between employed individuals versus pensioners. The inhabitants of cities were characterized by the highest degree of acceptance of their health condition. The lowest degree of acceptance of illness was observed in the group with the lowest average incomes. In the group of married individuals the average degree of acceptance of illness amounted to 27.37 points. The average degree of acceptance of illness in patients that declared themselves as single amounted to 25.75. The average degree of acceptance of illness in the study group was 27.56 points, which is a relatively high level of acceptance of cancer. The main socio-economic factor, which influenced the AIS test results was whether metastases were diagnosed or not. There were no differences between patients in groups where the time that elapsed from the first diagnosis of cancer varied. There were no statistical differences between female and male patients as well as patients of different age. Additionally, the level of education and patients' professional status did not impact in the AIS test results.

SU-F-T-475: An Evaluation of the Overlap Between the Acceptance Testing and Commissioning Processes for Conventional Medical Linear Accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrow, A; Rangaraj, D; Perez-Andujar, A

2016-06-15

Purpose: This work’s objective is to determine the overlap of processes, in terms of sub-processes and time, between acceptance testing and commissioning of a conventional medical linear accelerator and to evaluate the time saved by consolidating the two processes. Method: A process map for acceptance testing for medical linear accelerators was created from vendor documentation (Varian and Elekta). Using AAPM TG-106 and inhouse commissioning procedures, a process map was created for commissioning of said accelerators. The time to complete each sub-process in each process map was evaluated. Redundancies in the processes were found and the time spent on each weremore » calculated. Results: Mechanical testing significantly overlaps between the two processes - redundant work here amounts to 9.5 hours. Many beam non-scanning dosimetry tests overlap resulting in another 6 hours of overlap. Beam scanning overlaps somewhat - acceptance tests include evaluating PDDs and multiple profiles but for only one field size while commissioning beam scanning includes multiple field sizes and depths of profiles. This overlap results in another 6 hours of rework. Absolute dosimetry, field outputs, and end to end tests are not done at all in acceptance testing. Finally, all imaging tests done in acceptance are repeated in commissioning, resulting in about 8 hours of rework. The total time overlap between the two processes is about 30 hours. Conclusion: The process mapping done in this study shows that there are no tests done in acceptance testing that are not also recommended to do for commissioning. This results in about 30 hours of redundant work when preparing a conventional linear accelerator for clinical use. Considering these findings in the context of the 5000 linacs in the United states, consolidating acceptance testing and commissioning would have allowed for the treatment of an additional 25000 patients using no additional resources.« less

Impact of Contextual Factors and Substance Characteristics on Perspectives toward Cognitive Enhancement

PubMed Central

Sattler, Sebastian; Forlini, Cynthia; Racine, Éric; Sauer, Carsten

2013-01-01

Enhancing cognitive performance with substances–especially prescription drugs–is a fiercely debated topic among scholars and in the media. The empirical basis for these discussions is limited, given that the actual nature of factors that influence the acceptability of and willingness to use cognitive enhancement substances remains unclear. In an online factorial survey, contextual and substance-specific characteristics of substances that improve academic performance were varied experimentally and presented to respondents. Students in four German universities rated their willingness to use and moral acceptance of different substances for cognitive enhancement. We found that the overall willingness to use performance enhancing substances is low. Most respondents considered the use of these substances as morally unacceptable. Situational influences such as peer pressure, policies concerning substance use, relative performance level of peers, but also characteristics of the substance, such as perceptions of substance safety, shape the willingness and acceptability of using a substance to enhance academic performance. Among the findings is evidence of a contagion effect meaning that the willingness was higher when the respondents have more CE drug users in their social network. We also found deterrence effects from strong side effects of using the substance, as well as from policy regulations and sanctions. Regulations might activate social norms against usage and sanctions can be seen as costly to users. Moreover, enhancement substances seem to be most tempting to low performers to catch up with others compared to high performers. By identifying contextual factors and substance characteristics influencing the willingness and acceptability of cognitive enhancers, policy approaches could consider these insights to better manage the use of such substances. PMID:23940757

"I think it is right": a qualitative exploration of the acceptability and desired future use of oral swab and finger-prick HIV self-tests by lay users in KwaZulu-Natal, South Africa.

PubMed

Knight, Lucia; Makusha, Tawanda; Lim, Jeanette; Peck, Roger; Taegtmeyer, Miriam; van Rooyen, Heidi

2017-09-18

The uptake of HIV testing has increased in sub-Saharan Africa over the past three decades. However, the proportion of people aware of their HIV status remains lower than required to change the pandemic. HIV self-testing (HIVST) may meet this gap. Assessment of readiness for and the acceptability of HIVST by lay users in South Africa is limited. This paper presents results from a formative study designed to assess the perceived usability and acceptability of HIVST among lay users using several self-test prototypes. Fifty lay users were purposively selected from rural and peri-urban KwaZulu-Natal, South Africa. Acceptability of HIVST was assessed using a simple post-test quantitative assessment tool addressing confidence, ease-of-use, intended future use and willingness to pay. In-depth qualitative interviews explored what participants felt about the HIVST and why, their willingness to recommend and how much they would pay for a test. The key finding is that there is high acceptability regardless of self-test prototype. Acceptability is framed by two domains: usability and perceived need. Perceived usability was explored through perceived ease of use, which, regardless of actual correct usage, was reported by many of the respondents. Acceptability is influenced by perceived need, expressed by many who felt that the need for the self-test to protect privacy and autonomy. Ease of access and widespread availability of the test, not at a significant cost, were also important factors. Many participants would recommend self-test use to others and also indicated that they would choose to conduct the test again if it was free while some also indicated being willing to buy a test. The positive response and readiness amongst lay users for an HIVST in this context prototype suggests that there would be a ready and willing market for HIVST. For scalability and sustainability usability, including access and availability that are here independent indications of acceptability, should be considered. So too should the desire for future use, as an additional factor pointing to acceptability. The results show high acceptability in all of these areas domains and a general interest in HIVST amongst lay users in a community in KwaZulu-Natal.

[Contents of tannins and oxalic acid in the selected forest fruits depending on the harvest site].

PubMed

Sembratowicz, Iwona; Ognik, Katarzyna; Rusinek, Elzbieta; Truchliński, Jerzy

2008-01-01

Contents of anti-nutritional components (tannins and oxalic acid) were determined in samples of forest fruits: blueberry, raspberry and wild strawberry harvested in Lublin region from areas considered as potentially not exposed to pollution (Skierbieszów Landscape Park) and potentially polluted areas (Cement Factory Rejowiec S.A.). Study revealed that blueberry and raspberry fruits collected on potentially polluted area were characterized by higher tannins contents than those harvested on potentially not polluted area. Oxalic acid level in studied material indicated its significantly higher concentration in wild strawberry fruits collected both from not exposed and polluted areas as compared to raspberry and blueberry. Tannins and oxalic acid contents in analyzed berries may be accepted as low and safe for human's health.

Just-in-time in the infrastructure.

PubMed

Guarriello, M L

1997-08-01

We know that just-in-time (JIT) manufacturing is a set of philosophies, not a set of techniques. These same philosophies are embraced by the total quality management (TQM) school. The most important element of this philosophy is that of continuous improvement--the acceptance of constantly changing objectives as a departure from reliance on standard requirements. This fundamental concept drives other philosophical aspects such as improving utilization of resources (employee involvement, reduction of waste) and long-term success (customer focus, vendor partnerships). Clearly, these philosophies are applicable to all organizations and functions. Perhaps some of these philosophies are manifest by certain JIT principles that we might consider when we design organizational routines and practices. Why not apply what has been proven in the factory to the seemingly bureaucratic behaviors in the office.

Can direct conversion of used nitrogen to new feed and protein help feed the world?

PubMed

Matassa, Silvio; Batstone, Damien J; Hülsen, Tim; Schnoor, Jerald; Verstraete, Willy

2015-05-05

The increase in the world population, vulnerability of conventional crop production to climate change, and population shifts to megacities justify a re-examination of current methods of converting reactive nitrogen to dinitrogen gas in sewage and waste treatment plants. Indeed, by up-grading treatment plants to factories in which the incoming materials are first deconstructed to units such as ammonia, carbon dioxide and clean minerals, one can implement a highly intensive and efficient microbial resynthesis process in which the used nitrogen is harvested as microbial protein (at efficiencies close to 100%). This can be used for animal feed and food purposes. The technology for recovery of reactive nitrogen as microbial protein is available but a change of mindset needs to be achieved to make such recovery acceptable.

Development, optimization and validation of gas chromatographic fingerprinting of Brazilian commercial diesel fuel for quality control.

PubMed

dos Santos, Bruno César Diniz Brito; Flumignan, Danilo Luiz; de Oliveira, José Eduardo

2012-10-01

A three-step development, optimization and validation strategy is described for gas chromatography (GC) fingerprints of Brazilian commercial diesel fuel. A suitable GC-flame ionization detection (FID) system was selected to assay a complex matrix such as diesel. The next step was to improve acceptable chromatographic resolution with reduced analysis time, which is recommended for routine applications. Full three-level factorial designs were performed to improve flow rate, oven ramps, injection volume and split ratio in the GC system. Finally, several validation parameters were performed. The GC fingerprinting can be coupled with pattern recognition and multivariate regressions analyses to determine fuel quality and fuel physicochemical parameters. This strategy can also be applied to develop fingerprints for quality control of other fuel types.

Validity of the Brunel Mood Scale for use With Malaysian Athletes.

PubMed

Lan, Mohamad Faizal; Lane, Andrew M; Roy, Jolly; Hanin, Nik Azma

2012-01-01

The aim of the present study was to investigate the factorial validity of the Brunel Mood Scale for use with Malaysian athletes. Athletes (N = 1485 athletes) competing at the Malaysian Games completed the Brunel of Mood Scale (BRUMS). Confirmatory Factor Analysis (CFA) results indicated a Confirmatory Fit Index (CFI) of .90 and Root Mean Squared Error of Approximation (RMSEA) was 0.05. The CFI was below the 0.95 criterion for acceptability and the RMSEA value was within the limits for acceptability suggested by Hu and Bentler, 1999. We suggest that results provide some support for validity of the BRUMS for use with Malaysian athletes. Given the large sample size used in the present study, descriptive statistics could be used as normative data for Malaysian athletes. Key pointsFindings from the present study lend support to the validity of the BRUMS for use with Malaysian athletes.Given the size of the sample used in the present study, we suggest descriptive data be used as the normative data for researchers using the scale with Malaysian athletes.It is suggested that future research investigate the effects of cultural differences on emotional states experienced by athletes before, during and post-competition.

Validity of the Brunel Mood Scale for use With Malaysian Athletes

PubMed Central

Lan, Mohamad Faizal; Lane, Andrew M.; Roy, Jolly; Hanin, Nik Azma

2012-01-01

The aim of the present study was to investigate the factorial validity of the Brunel Mood Scale for use with Malaysian athletes. Athletes (N = 1485 athletes) competing at the Malaysian Games completed the Brunel of Mood Scale (BRUMS). Confirmatory Factor Analysis (CFA) results indicated a Confirmatory Fit Index (CFI) of .90 and Root Mean Squared Error of Approximation (RMSEA) was 0.05. The CFI was below the 0.95 criterion for acceptability and the RMSEA value was within the limits for acceptability suggested by Hu and Bentler, 1999. We suggest that results provide some support for validity of the BRUMS for use with Malaysian athletes. Given the large sample size used in the present study, descriptive statistics could be used as normative data for Malaysian athletes. Key points Findings from the present study lend support to the validity of the BRUMS for use with Malaysian athletes. Given the size of the sample used in the present study, we suggest descriptive data be used as the normative data for researchers using the scale with Malaysian athletes. It is suggested that future research investigate the effects of cultural differences on emotional states experienced by athletes before, during and post-competition. PMID:24149128

Concurrent removal of elemental mercury and SO2 from flue gas using a thiol-impregnated CaCO3-based adsorbent: a full factorial design study.

PubMed

Balasundaram, Karthik; Sharma, Mukesh

2018-06-01

Mercury (Hg) emitted from coal-based thermal power plants (CTPPs) can accumulate and bio-magnify in the food chain, thereby posing a risk to humans and wildlife. The central idea of this study was to develop an adsorbent which can concurrently remove elemental mercury (Hg 0 ) and SO 2 emitted from coal-based thermal power plants (CTPPs) in a single unit operation. Specifically, a composite adsorbent of CaCO 3 impregnated with 2-mercaptobenimidazole (2-MBI) (referred to as modified calcium carbonate (MCC)) was developed. While 2-MBI having sulfur functional group could selectively adsorb Hg 0 , CaCO 3 could remove SO 2 . Performance of the adsorbent was evaluated in terms of (i) removal (%) of Hg 0 and SO 2 , (ii) adsorption mechanism, (iii) adsorption kinetics, and (iv) leaching potential of mercury from spent adsorbent. The adsorption studies were performed using a 2 2 full factorial design of experiments with 15 ppbV of Hg 0 and 600 ppmV of SO 2 . Two factors, (i) reaction temperature (80 and 120 °C; temperature range in flue gas) and (ii) mass of 2-MBI (10 and 15 wt%), were investigated for the removal of Hg 0 and SO 2 (as %). The maximum Hg 0 and SO 2 removal was 86 and 93%, respectively. The results of XPS characterization showed that chemisorption is the predominant mechanism of Hg 0 and SO 2 adsorption on MCC. The Hg 0 adsorption on MCC followed Elovich kinetic model which is also indicative of chemisorption on heterogeneous surface. The toxicity characteristic leaching procedure (TCLP) and synthetic precipitation leaching procedure (SPLP) leached mercury from the spent adsorbent were within the acceptable levels defined in these tests. The engineering significance of this study is that the 2-MBI-modified CaCO 3 -based adsorbent has potential for concurrent removal of Hg 0 and SO 2 in a single unit operation. With only minor process modifications, the newly developed adsorbent can replace CaCO 3 in the flue-gas desulfurization (FGD) system.

HYPERSAMP - HYPERGEOMETRIC ATTRIBUTE SAMPLING SYSTEM BASED ON RISK AND FRACTION DEFECTIVE

NASA Technical Reports Server (NTRS)

De, Salvo L. J.

1994-01-01

HYPERSAMP is a demonstration of an attribute sampling system developed to determine the minimum sample size required for any preselected value for consumer's risk and fraction of nonconforming. This statistical method can be used in place of MIL-STD-105E sampling plans when a minimum sample size is desirable, such as when tests are destructive or expensive. HYPERSAMP utilizes the Hypergeometric Distribution and can be used for any fraction nonconforming. The program employs an iterative technique that circumvents the obstacle presented by the factorial of a non-whole number. HYPERSAMP provides the required Hypergeometric sample size for any equivalent real number of nonconformances in the lot or batch under evaluation. Many currently used sampling systems, such as the MIL-STD-105E, utilize the Binomial or the Poisson equations as an estimate of the Hypergeometric when performing inspection by attributes. However, this is primarily because of the difficulty in calculation of the factorials required by the Hypergeometric. Sampling plans based on the Binomial or Poisson equations will result in the maximum sample size possible with the Hypergeometric. The difference in the sample sizes between the Poisson or Binomial and the Hypergeometric can be significant. For example, a lot size of 400 devices with an error rate of 1.0% and a confidence of 99% would require a sample size of 400 (all units would need to be inspected) for the Binomial sampling plan and only 273 for a Hypergeometric sampling plan. The Hypergeometric results in a savings of 127 units, a significant reduction in the required sample size. HYPERSAMP is a demonstration program and is limited to sampling plans with zero defectives in the sample (acceptance number of zero). Since it is only a demonstration program, the sample size determination is limited to sample sizes of 1500 or less. The Hypergeometric Attribute Sampling System demonstration code is a spreadsheet program written for IBM PC compatible computers running DOS and Lotus 1-2-3 or Quattro Pro. This program is distributed on a 5.25 inch 360K MS-DOS format diskette, and the program price includes documentation. This statistical method was developed in 1992.

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation.

PubMed

Lindholm, Henrik; Egels-Zandén, Niklas; Rudén, Christina

2016-10-01

In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. To examine how well suppliers' chemical health and safety performance complies with buyers' CSR policies and whether audited factories improve their performance. CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits.

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation

PubMed Central

2016-01-01

Background In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. Objectives To examine how well suppliers’ chemical health and safety performance complies with buyers’ CSR policies and whether audited factories improve their performance. Methods CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Results Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Conclusions Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits. PMID:27611103

Effect of factory effluents on physiological and biochemical contents of Gossypium hirsutum l.

PubMed

Muthusamy, A; Jayabalan, N

2001-10-01

The effect of sago and sugar factory effluents was studied on Gossypium hirsutum L. var. MCU 5 and MCU 11. Plants were irrigated with 0, 25, 50, 75 and 100% of effluents of both factories. At lower concentration (25%) of sugar factory effluents had stimulatory effect on all biochemical contents observed. Moreover, all concentration of sago factory effluents were found to have inhibitory effect on all biochemical contents except proline content which increased with increasing concentration of both the effluents. Plants growing on adjacent to sago and sugar factories or they irrigated with such type of polluted water, may accumulate the heavy metals found in both the effluents, at higher levels in plant products and if consumed may have similar effect on living organisms.

Towards Using NMR to Screen for Spoiled Tomatoes Stored in 1,000 L, Aseptically Sealed, Metal-Lined Totes

PubMed Central

Pinter, Michael D.; Harter, Tod; McCarthy, Michael J.; Augustine, Matthew P.

2014-01-01

Nuclear magnetic resonance (NMR) spectroscopy is used to track factory relevant tomato paste spoilage. It was found that spoilage in tomato paste test samples leads to longer spin lattice relaxation times T1 using a conventional low magnetic field NMR system. The increase in T1 value for contaminated samples over a five day room temperature exposure period prompted the work to be extended to the study of industry standard, 1,000 L, non-ferrous, metal-lined totes. NMR signals and T1 values were recovered from a large format container with a single-sided NMR sensor. The results of this work suggest that a handheld NMR device can be used to study tomato paste spoilage in factory process environments. PMID:24594611

Towards using NMR to screen for spoiled tomatoes stored in 1,000 L, aseptically sealed, metal-lined totes.

PubMed

Pinter, Michael D; Harter, Tod; McCarthy, Michael J; Augustine, Matthew P

2014-03-03

Nuclear magnetic resonance (NMR) spectroscopy is used to track factory relevant tomato paste spoilage. It was found that spoilage in tomato paste test samples leads to longer spin lattice relaxation times T1 using a conventional low magnetic field NMR system. The increase in T1 value for contaminated samples over a five day room temperature exposure period prompted the work to be extended to the study of industry standard, 1,000 L, non-ferrous, metal-lined totes. NMR signals and T1 values were recovered from a large format container with a single-sided NMR sensor. The results of this work suggest that a handheld NMR device can be used to study tomato paste spoilage in factory process environments.

The International Design Study for the Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, K.

2008-02-21

The International Design Study for a future Neutrino Factory and super-beam facility (the ISS) established the physics case for a high-precision programme of long-baseline neutrino-oscillation measurements. The ISS also identified baseline specifications for the Neutrino Factory accelerator complex and the neutrino detector systems. This paper summarises the objectives of the International Design Study for the Neutrino Factory (the IDS-NF). The IDS-NF will build on the work of the ISS to deliver a Reference Design Report for the Neutrino Factory by 2012/13 and an Interim Design Report by 2010/11.

Permutation testing of orthogonal factorial effects in a language-processing experiment using fMRI.

PubMed

Suckling, John; Davis, Matthew H; Ooi, Cinly; Wink, Alle Meije; Fadili, Jalal; Salvador, Raymond; Welchew, David; Sendur, Levent; Maxim, Vochita; Bullmore, Edward T

2006-05-01

The block-paradigm of the Functional Image Analysis Contest (FIAC) dataset was analysed with the Brain Activation and Morphological Mapping software. Permutation methods in the wavelet domain were used for inference on cluster-based test statistics of orthogonal contrasts relevant to the factorial design of the study, namely: the average response across all active blocks, the main effect of speaker, the main effect of sentence, and the interaction between sentence and speaker. Extensive activation was seen with all these contrasts. In particular, different vs. same-speaker blocks produced elevated activation in bilateral regions of the superior temporal lobe and repetition suppression for linguistic materials (same vs. different-sentence blocks) in left inferior frontal regions. These are regions previously reported in the literature. Additional regions were detected in this study, perhaps due to the enhanced sensitivity of the methodology. Within-block sentence suppression was tested post-hoc by regression of an exponential decay model onto the extracted time series from the left inferior frontal gyrus, but no strong evidence of such an effect was found. The significance levels set for the activation maps are P-values at which we expect <1 false-positive cluster per image. Nominal type I error control was verified by empirical testing of a test statistic corresponding to a randomly ordered design matrix. The small size of the BOLD effect necessitates sensitive methods of detection of brain activation. Permutation methods permit the necessary flexibility to develop novel test statistics to meet this challenge.

19 CFR Appendix to Part 102 - Textile and Apparel Manufacturer Identification

Code of Federal Regulations, 2011 CFR

2011-04-01

... factories in Macau start with the same words, “Fabrica de Artigos de Vestuario,” which means “Factory of Clothing.” For a factory named “Fabrica de Artigos de Vestuario JUMP HIGH Ltd,” the portion of the factory...; VE20TCEN5880CAR Fabrica de Artigos de Vestuario TOP JOB, Grand River Building, FI 2-4, Macau; MOTOPJOB24MAC THE...

19 CFR Appendix to Part 102 - Textile and Apparel Manufacturer Identification

Code of Federal Regulations, 2010 CFR

2010-04-01

... factories in Macau start with the same words, “Fabrica de Artigos de Vestuario,” which means “Factory of Clothing.” For a factory named “Fabrica de Artigos de Vestuario JUMP HIGH Ltd,” the portion of the factory...; VE20TCEN5880CAR Fabrica de Artigos de Vestuario TOP JOB, Grand River Building, FI 2-4, Macau; MOTOPJOB24MAC THE...

Bulgar Factories (Trading Posts) in the Kama River Area as a Factor of Adjustment to Feudalism

ERIC Educational Resources Information Center

Krylasova, Natalia B.; Belavin, Andrei M.; Podosenova, Yulia A.

2016-01-01

At the start of the 2nd ML AD a number of trading posts, or factories, emerged in the Cis-Ural region with participation of Bulgar handicraftsmen and merchants. They were townships populated by various ethnic groups. Several centuries later similar factories were set up by natives of the Cis-Ural region in Western Siberia. These factories have…

MSS D Multispectral Scanner System

NASA Technical Reports Server (NTRS)

Lauletta, A. M.; Johnson, R. L.; Brinkman, K. L. (Principal Investigator)

1982-01-01

The development and acceptance testing of the 4-band Multispectral Scanners to be flown on LANDSAT D and LANDSAT D Earth resources satellites are summarized. Emphasis is placed on the acceptance test phase of the program. Test history and acceptance test algorithms are discussed. Trend data of all the key performance parameters are included and discussed separately for each of the two multispectral scanner instruments. Anomalies encountered and their resolutions are included.

Psychometrics of chronic liver disease questionnaire in Chinese chronic hepatitis B patients

PubMed Central

Zhou, Kai-Na; Zhang, Min; Wu, Qian; Ji, Zhen-Hao; Zhang, Xiao-Mei; Zhuang, Gui-Hua

2013-01-01

AIM: To evaluate psychometrics of the Chinese (mainland) chronic liver disease questionnaire (CLDQ) in patients with chronic hepatitis B (CHB). METHODS: A cross-sectional sample of 460 Chinese patients with CHB was selected from the Outpatient Department of the Eighth Hospital of Xi’an, including CHB (CHB without cirrhosis) (n = 323) and CHB-related cirrhosis (n = 137). The psychometrics includes reliability, validity and sensitivity. Internal consistency reliability was measured using Cronbach’s α. Convergent and discriminant validity was evaluated by item-scale correlation. Factorial validity was explored by principal component analysis with varimax rotation. Sensitivity was assessed using Cohen’s effect size (ES), and independent sample t test between CHB and CHB-related cirrhosis groups and between alanine aminotransferase (ALT) normal and abnormal groups after stratifying the disease (CHB and CHB-related cirrhosis). RESULTS: Internal consistency reliability of the CLDQ was 0.83 (range: 0.65-0.90). Most of the hypothesized item-scale correlations were 0.40 or over, and all of such hypothesized correlations were higher than the alternative ones, indicating satisfactory convergent and discriminant validity. Six factors were extracted after varimax rotation from the 29 items of CLDQ. The eligible Cohen’s ES with statistically significant independent sample t test was found in the overall CLDQ and abdominal, systematic, activity scales (CHB vs CHB-related cirrhosis), and in the overall CLDQ and abdominal scale in the stratification of patients with CHB (ALT normal vs abnormal). CONCLUSION: The CLDQ has acceptable reliability, validity and sensitivity in Chinese (mainland) patients with CHB. PMID:23801844

Development and validation of the Chinese Version of Indiana Job Satisfaction Scale (CV-IJSS) for people with mental illness.

PubMed

Tsang, Hector W H; Wong, Alvin

2005-06-01

Job satisfaction has been increasingly regarded as an important outcome of vocational rehabilitation programs among people with mental illness. Chinese measures of job satisfaction for individuals with mental illness are however extremely scarce. The aim of this study was to translate the 32-item Indiana Job Satisfaction Scale to Chinese. By means of the expert panel method, the culturally relevant 28-item Chinese Version of Indiana Job Satisfaction Scale (CV-IJSS) was then finalized. A validation study among a group of 125 individuals with mental illness showed that the scale had acceptable psychometric properties. Coefficient alpha of the total score was 0.81 with subscales ranging from 0.63 to 0.87. Test re-test reliability as measured by ICC was 0.77 for the total score and ranged from 0.54 to 0.72 for the subscales. Factorial analysis yielded a four factor solution (general satisfaction, job ambiguity and stress, advancement and security, and job recognition) accounting for 44% of the total variance. The factor solution had similarities as well as differences when compared with the Indiana Job Satisfaction Scale. The differences are discussed in the light of cultural differences. Relationship between scores of CV-IJSS and work performance, quality of life and self-esteem was positive in general which may act as evidence to its concurrent validity. The Chinese Version of Indiana Job Satisfaction Scale is ready for use by rehabilitation professionals to assess vocational rehabilitation outcome for individuals with mental illness in Hong Kong and other Chinese societies. Directions for further studies are suggested.

10 CFR 26.91 - Acceptable devices for conducting initial and confirmatory tests for alcohol and methods of use.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Acceptable devices for conducting initial and confirmatory tests for alcohol and methods of use. 26.91 Section 26.91 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Collecting Specimens for Testing § 26.91 Acceptable devices for conducting initial...

10 CFR 26.91 - Acceptable devices for conducting initial and confirmatory tests for alcohol and methods of use.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Acceptable devices for conducting initial and confirmatory tests for alcohol and methods of use. 26.91 Section 26.91 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Collecting Specimens for Testing § 26.91 Acceptable devices for conducting initial...

10 CFR 26.91 - Acceptable devices for conducting initial and confirmatory tests for alcohol and methods of use.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Acceptable devices for conducting initial and confirmatory tests for alcohol and methods of use. 26.91 Section 26.91 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Collecting Specimens for Testing § 26.91 Acceptable devices for conducting initial...