Science.gov

Sample records for fakten ber die

  1. Über die Kleinsignalgewinnmessung nach Ladenburg-Levy

    NASA Astrophysics Data System (ADS)

    Grunwald, R.; Hertz, J. H.

    Es werden die Möglichkeiten und Probleme der Anwendung einer alten Methode von Ladenburg-Levy zur Kleinsignalgewinnmessung in Niederdruck-Impulsgasentladungen diskutiert. Als Beispiel werden Ergebnisse der zeitaufgelösten Gewinnmessung am 2. Pos. System des Stickstoff ( = 337 nm) mitgeteilt.Translated AbstractOn the Small-Signal Gain Measurement According to Ladenburg-LevyThe application of an old method of Ladenburg-Levy to small-signal gain measurement in pulsed low pressure gas discharges as well as the problems connected with this method are discussed. As an example experimental results of time resolved gain measurements in the 2nd positive system of nitrogen ( = 337 nm) are presented.

  2. Astrowissen. Zahlen - Daten - Fakten.

    NASA Astrophysics Data System (ADS)

    Keller, H.-U.

    This book is a completely revised and enlarged version of the 1994 edition (see Abstr. 61.003.081). Contents: Astronomie - die Wissenschaft vom Universum und seinen Sternen. Astronomische Instrumente. Sphärische Astronomie. Grundzüge der Himmelsmechanik. Das Sonnensystem. Stellarastronomie. Doppelsterne und Veränderliche. Sternhaufen und Assoziationen. Das Milchstraßensystem. Galaxien und Kosmologie. Meilensteine der Astronomie.

  3. Vorausschauend Planen, Gezielt Handeln — Über Die Regelung Und Steuerung Technischer Prozesse

    NASA Astrophysics Data System (ADS)

    Grüne, Lars; Sager, Sebastian; Allgöwer, Frank; Bock, Hans Georg; Diehl, Moritz

    Seit Beginn der industriellen Revolution nimmt die Steuerungs- und Regelungstechnik eine Schlüsselstellung in vielen technischen Bereichen ein. James Watts Fliehkraftregler für Dampfmaschinen ist eines der frühen Beispiele eines extrem erfolgreichen Reglerkonzepts, von dem Ende der 1860er Jahre geschätzte 75000 Exemplare allein in England im Einsatz waren [2, S. 24]. Etwa um diese Zeit begannen Ingenieure, motiviert durch die immer höhere Komplexität der zu regelnden Maschinen, sich systematisch mit theoretischen Grundlagen der Regelung zu beschäftigen. Dies führte unausweichlich zu der Einsicht, dass das dynamische Verhalten der geregelten Systeme nur mit Hilfe der Mathematikverstanden und weiterentwickelt werden konnte, oder wie Werner von Siemens, ein weiterer technischer Pionier in diesem Bereich es formulierte: "Ohne Mathematik tappt man doch immer im Dunkeln.“

  4. Gesellschaft, Lebensgemeinschaft, Ökosystem - Über die Kongruenz von politischen und ökologischen Theorien der Entwicklung

    NASA Astrophysics Data System (ADS)

    Voigt, Annette

    Im Jahr 1859 veröffentlichte Charles Darwin "On the Origin of Species“. Seine Evolutionstheorie ist das wohl spektakulärste Beispiel einer naturwissenschaftlichen Theorie großer gesellschaftlicher Relevanz. Ihre verschiedenen Facetten wurden in der Öffentlichkeit kontrovers diskutiert, unter anderem auch ihre Anwendung zur Erklärung von Zuständen und Prozessen menschlicher Gesellschaften. Zum Teil wurde die Seiensweise der Natur - scheinbar unabhängig von gesellschaftlichen Interessen - für die Erklärung und Legitimation gesellschaftlicher Zustände oder die Legitimation von politischen Ideologien herangezogen (Sozialdarwinismus). Denn Gesellschaft funktioniere ja so, wie Darwin die Natur erklärt habe: es herrsche z. B. Konkurrenzkampf, Auslese und Arbeitsteilung, Erfolg hätten diejenigen, die sich an die Bedingungen am Besten anpassten.

  5. Fehler begehen - Mathematik verstehen Über die Bedeutung von Fehlern für das Verstehen

    NASA Astrophysics Data System (ADS)

    Käser, Udo

    Auch wenn eine historisch oder systematisch umfassende Darstellung zur Fehlerthematik bislang nicht vorliegt, ist die Idee, einer Fehleranalyse unter der Leitfrage, welche Fehler von Schülerinnen und Schülern aufgrund welcher epistemologischen Überzeugungen begangen werden, zentralen Raum für die Betrachtung von Verstehensprozessen einzuräumen, nicht neu. So ist es geradezu ein Charakteristikum einer modernen konstruktivistischen Didaktik, die eigenen Fehler von Lernenden als ihre individuellen Lerngelegenheiten zu begreifen, die einen wichtigen Motor für den subjektiven Lernfortschritt bilden. Diese Sichtweise wurzelt aus psychologischer Perspektive in Analysen in der Tradition Piagets, der in Abkehr von einer quantitativen, psychometrischen Beschreibung kognitiver Prozesse, wie sie sich zum Beispiel in Intelligenztheorien nach Binet findet, qualitativ zu beschreiben versuchte, in welcher Weise Kinder und Jugendliche denken und urteilen. Doch auch schon in der klassischen Philosophie sind entsprechende Ansätze zu finden. Prominente Beispiele hierfür sind die Idolenlehre Bacons und die Ideenlehre Platons.

  6. "Hochleistern über die Schulter geschaut" - Konzeption eines Lehrvideos zur Vermittlung von Problemlösekompetenz

    NASA Astrophysics Data System (ADS)

    Kujath, Bertold; Schwill, Andreas

    Leistungsstarke Problemlöser zeigen ein deutlich anderes Vorgehen beim Bearbeiten von typischen Informatikproblemen als schwächere Problemlöser, das hat eine Vergleichsstudie mit Hoch- und Niedrigleistern ergeben. Auffällig war das Fehlen informatikspezifischer Herangehensweisen bei der Problembearbeitung durch Niedrigleister, obwohl die dazu notwendigen Werkzeuge wie etwa Baumstrukturen oder Rekursion durchaus bekannt waren. Aber auch viele allgemeine Empfehlungen der Problemlöseforschung, wie etwa das Zerlegen eines Problems in Teilprobleme oder das Durchführen einer Problemanalyse vor der eigentlichen Bearbeitung, bleiben bei schwachen Problemlösern unbeachtet. Die Frage, wie nun die deutlich effizienteren Strategien der Hochleister didaktisch aufgearbeitet werden können, um sie an Niedrigleister zu vermitteln, soll im vorliegen Beitrag anhand der Konzeption eines Lehrvideos beantwortet werden.

  7. Die nuklearen Anlagen von Hanford (1943-1987) Eine Fallstudie über die Schnittstellen von Physik, Biologie und die US-amerikanische Gesellschaft zur Zeit des Kalten Krieges

    NASA Astrophysics Data System (ADS)

    Macuglia, Daniele

    Die Geschichte des Kalten Krieges eröffnet viele Möglichkeiten, sich näher mit den Schnittstellen von Physik und Biologie während des 20. Jahrhunderts zu befassen. Nicht nur das Unglück in Tschernobyl aus dem Jahr 1986, auch das Beispiel der nuklearen Anlagen in Hanford in den Vereinigten Staaten zeigt die biologischen Folgen von nuklearer Physik.

  8. BER Science Network Requirements

    SciTech Connect

    Alapaty, Kiran; Allen, Ben; Bell, Greg; Benton, David; Brettin, Tom; Canon, Shane; Dart, Eli; Cotter, Steve; Crivelli, Silvia; Carlson, Rich; Dattoria, Vince; Desai, Narayan; Egan, Richard; Tierney, Brian; Goodwin, Ken; Gregurick, Susan; Hicks, Susan; Johnston, Bill; de Jong, Bert; Kleese van Dam, Kerstin; Livny, Miron; Markowitz, Victor; McGraw, Jim; McCord, Raymond; Oehmen, Chris; Regimbal, Kevin; Shipman, Galen; Strand, Gary; Flick, Jeff; Turnbull, Susan; Williams, Dean; Zurawski, Jason

    2010-11-01

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In April 2010 ESnet and the Office of Biological and Environmental Research, of the DOE Office of Science, organized a workshop to characterize the networking requirements of the science programs funded by BER. The requirements identified at the workshop are summarized and described in more detail in the case studies and the Findings section. A number of common themes emerged from the case studies and workshop discussions. One is that BER science, like many other disciplines, is becoming more and more distributed and collaborative in nature. Another common theme is that data set sizes are exploding. Climate Science in particular is on the verge of needing to manage exabytes of data, and Genomics is on the verge of a huge paradigm shift in the number of sites with sequencers and the amount of sequencer data being generated.

  9. Die großen Zeppeline: Die Geschichte des Luftschiffbaus

    NASA Astrophysics Data System (ADS)

    Kleinheins, Peter; Meighörner, Wolfgang

    Über die glanzvolle Zeit der Zeppeline sind viele Bücher erschienen, die vorwiegend den Einsatz der Luftschiffe in Frieden und Krieg schildern. Nur wenige wissen, dass die Baugeschichte der Zeppeline eine der faszinierendsten Phasen der modernen Technik ist. Peter Kleinheins hat dieses Geschehen sachkundig aufgearbeitet und zusammengestellt. Entstanden ist eine reich illustrierte Dokumentation in einer interessanten Mischform aus zeitgenössischen Berichten und hochwertigen Originalquellen.

  10. Die Wirkung als Naturkraft und die Herkunft von Zeit, Raum, Dimensionen, Naturkräften, und Gesetzen von Logik, Geometrie und Physik bei der Entstehung der Welt

    NASA Astrophysics Data System (ADS)

    Landgraf, Werner

    2011-02-01

    Das Wirkungs-Welt-Modell enthält eine einfache Beschreibung des Anfanges der Welt, wonach, ausgehend vom einfachsten Zustand der logisch notwendigen Bejahung ihrer Existenz innerhalb ihr selbst, alles sukzessiv bewirkt wird, und ihre logischen, geometrischen und physikalischen Eigenschaften Aspekte der Verkörperung und Fortwirkung primordialer Fakten darstellen, ohne externe Schöpfung auszuschließen. Die ersten Dimensionen und sie formal und subjektiv charakterisierenden Größen sind: Informationsmenge und Wirkung, mit abzählbarem Ereignis und Wirkungsquantum; Zeit und Energie, mit deren Planck-Einheiten; Geschwindigkeit oder Strecke und Impuls, mit Lichtgeschwindigkeit oder Planck-Länge; Krümmung oder zwei räumliche Richtungen, mit Gravitationskonstanten, und aus den ihnen entsprechenden primären Naturkräften setzen sich die uns geläufigen zusammen.

  11. Der Physik-Nobelpreis vor 100 Jahren Die Entdeckung des trägen Gases

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2004-11-01

    Im Jahr 1904 erhielt der britische Physiker Lord Rayleigh (John William Strutt, 1842 bis 1919) den Nobelpreis für seine Untersuchungen über die Dichte von Gasen und die Entdeckung des Edelgases Argon.

  12. Die Arbeitsunfähigkeit in der Statistik der GKV

    NASA Astrophysics Data System (ADS)

    Busch, Klaus

    Der vorliegende Beitrag gibt anhand der Statistiken des Bundesministeriums für Gesundheit (BMG) einen Überblick über die Arbeitsunfähigkeitsdaten der Gesetzlichen Krankenkassen (GKV). Zunächst werden die Arbeitsunfähigkeitsstatistiken der Krankenkassen und die Erfassung der Arbeitsunfähigkeit erläutert. Hiernach wird auf die Entwicklung der Fehlzeiten auf GKV-Ebene eingegangen. Ebenfalls wird Bezug auf die Unterschiede der Fehlzeiten zwischen den verschiedenen Kassen genommen.

  13. Über vollkommene Tonsysteme

    NASA Astrophysics Data System (ADS)

    Thirring, W.

    Ein Tonsystem, dessen Stufen aus k Intervallen gebildet wird, heiße vollkommenes k-intervalliges N-Tonsystem, wenn nach N Stufen die reine Oktav und zwischendurch die reine Quint erreicht wird. Wir beeweiseniVollkommene ein-intervallige Tonsysteme gibt es für kein N.iiBis N = 16 gibt es vollkommene zwei-intervallige Systeme für N = 2, 3, 5, 7, 12.iiiFür k ≥ 3 gibt es für alle N ≥ 3 unendlich viele verschiedene vollkommene Tonsysteme.Translated AbstractOn Complete Tone SystemsA tone system with steps build of k intervals is called a k interval N tone system if the pure octave is reached after N steps touching the pure quint between. We prove: iThere are no complete one-interval tone systems at any N.iiUp to N = 16 two-interval systems are complete with N = 2, 3, 5, 7, 12.iiiWith k ≥ 3 and N ≥ 3 there are infinitly many different complete tone systems.

  14. Hybridverfahren zur EMV-Analyse elektrischer Leitungen über geschlitztem Grund

    NASA Astrophysics Data System (ADS)

    Ter Haseborg, J. R.; Brüns, H.-D.; Singer, H.

    2006-09-01

    Die Betrachtung niedrig geführter elektrischer Leitungen über leitendem Grund stellt besondere Anforderungen an die numerische Feldanalyse. Insbesondere für Fälle ungleichförmiger Leitungsführung oder ungleichförmigen Grunds werden Verfahren benötigt, die eine effektive EMV-Analyse zulassen. Die Verwendung von volldiskretisierten Modellen erfordert aufwändige Diskretisierungen, große Ressourcen und hohe Rechenzeiten. Daher werden Möglichkeiten gesucht, die effektive Leitungstheorie auf Anordnungen anzuwenden, deren direkte Berechnung in klassischer Betrachtungsweise nicht möglich ist. In der vorliegenden Arbeit wird ein Hybridverfahren vorgestellt, um den Einfluss von Schlitzen unterhalb von Leitungen in einer approximativen EMV-Analyse zu untersuchen. Hierzu dient neben der Leitungstheorie zur Berechnung des Leiterstroms eine momententheoretische Simulation auf Basis von magnetischen Linienströmen.

  15. Die kalte Zunge

    NASA Astrophysics Data System (ADS)

    Bartels, Sören; Müller, Rüdiger

    Gefühlte Temperaturen. Ist ein Null Grad Celsius kalter Metallstab eigentlich kälter als ein Holzstab mit der selben Temperatur? Rein physikalisch gesehen natürlich nicht, aber wenn wir beide Stäbe anfassen, kommt uns der Metallstab deutlich kälter vor. Und wer kennt nicht die Szene aus dem Film Dumm und Dümmer in der Harry mit seiner Zunge am Metallrahmen des Skilifts hängen bleibt.Würde das auch passieren, wenn man an einem eiskalten Stück Holz lecken würde? Wohl kaum, doch woran liegt das eigentlich? Unterschiedliche Materialien haben verschiedene Fähigkeiten, Wärme zu übertragen und zu leiten. So transportiert Metall die von der Zunge ausgehende Wärme sehr schnell weiter und verändert seine Temperatur kaum, während die Zunge abkühlt. Holz hingegen leitet Wärme fast gar nicht und daher wird der Teil, der von der Zunge berührt wird, aufgewärmt.

  16. Nichtlineare Analyse von LC-TANK VCOs unter Berücksichtigung parasitärer Substrateffekte

    NASA Astrophysics Data System (ADS)

    Przytarski, J.; Bremer, J.-K.; Mathis, W.

    2009-05-01

    In dieser Arbeit wird ein Konzept vorgestellt, die Schaltungsarchitektur des LC-Tank-VCOs im höherdimensionalen Zustandsraum zu modellieren. Dabei wurde die VCO-Schaltung auf dominante nichtlineare und asymmetrische Effekte näher untersucht. Das entwickelte Modell bildet die Grundlage für nachfolgende parameterabhängige Analysen der Oszillatorschaltung mittels der Andronov-Hopf Bifurkationsanalyse. Zu diesem Zweck wurde ein höherdimensionales Modell entwickelt, welches für die Bifurkationsanalyse auf ein System 2. Ordnung reduziert werden muss. Als mathematisches Hilfsmittel zur Ordnungsreduktion des Systems wird das Verfahren der Zentrumsmannigfaltigkeit verwendet. Das Differentialgleichungssystem wird sehr schaltungsnah aufgestellt, daraus resultiert der Vorteil einer genaueren Repräsentation des physikalischen Verhaltens der Schaltung. Ziel ist es möglichst viele Effekte die sich auf das Verhalten des VCOs auswirken können, mit zu berücksichtigen.

  17. Rosazea-Management: Update über allgemeine Maßnahmen und topische Therapieoptionen.

    PubMed

    Schaller, M; Schöfer, H; Homey, B; Hofmann, M; Gieler, U; Lehmann, P; Luger, T A; Ruzicka, T; Steinhoff, M

    2016-12-01

    Obwohl bislang für die Rosazea keine kurative Therapie besteht, können verschiedene Optionen zur Behandlung der Symptome und zur Vorbeugung von Exazerbationen empfohlen werden. Neben Selbsthilfemaßnahme wie der Vermeidung von Triggerfaktoren und einer geeigneten Hautpflege sollte das Rosazea-Management bei Patienten mit erythematöser und leichter bis schwerer papulopustulöser Rosazea die Anwendung topischer Präparate als First-Line-Therapie umfassen. Da Überlappungen der charakteristischen Rosazea-Symptome im klinischen Alltag die Regel sind, sollte die medikamentöse Therapie auf die individuellen Symptome zugeschnitten werden; auch eine Kombinationstherapie kann erforderlich sein. Zu den für die Behandlung der Hauptsymptome der Rosazea zugelassenen Wirkstoffen gehören Brimonidin gegen das Erythem sowie Ivermectin, Metronidazol oder Azelainsäure gegen entzündliche Läsionen. Ihre Wirksamkeit wurde in zahlreichen validen, gut kontrollierten Studien belegt. Darüber hinaus existieren verschiedene nicht zugelassene topische Behandlungsmöglichkeiten, deren Wirksamkeit und Sicherheit noch in größeren, kontrollierten Studien zu untersuchen ist.

  18. SPHERICAL DIE

    DOEpatents

    Livingston, J.P.

    1959-01-27

    A die is presented for pressing powdered materials into a hemispherical shape of uniforin density and wall thickness comprising a fcmale and male die element held in a stationary spaced relation with the space being equivalent to the wall thickness and defining the hemispherical shape, a pressing ring linearly moveable along the male die element, an inlet to fill the space with powdered materials, a guiding system for moving the pressing ring along the male die element so as to press the powdered material and a heating system for heating the male element so that the powdered material is heated while being pressed.

  19. Die Europäische Union, die Europäische Gemeinschaft und ihre Rechtsordnung, die Europäische Lebensmittelkontrolle

    NASA Astrophysics Data System (ADS)

    Gallhoff, Gudrun; Rimkus, Gerhard G.

    Die Europäische Union (EU) ist ein Zusammenschluss von siebenundzwanzig unabhängigen Staaten, um deren wirtschaftliche, politische und soziale Zusammenarbeit zu verstärken. Seit 1. Mai 2007 hat sie die folgenden Mitglieder: Österreich, Belgien, Bulgarien, Dänemark, Finnland, Frankreich, Deutschland, Griechenland, Irland, Italien, Luxemburg, die Niederlande, Portugal, Spanien, Schweden, das Vereinigte Königreich von Großbritannien und Nordirland, Zypern, die Tschechische Republik, Estland, Ungarn, Lettland, Litauen, Malta, Polen, Rumänien, die Slowakei und Slowenien [1]. (Hinweis: Die Republik Zypern hat juristisch Souveränität über die ganze Insel, da die Türkische Republik Nordzypern international nicht anerkannt wird.)

  20. Inzidenz von bullösen Autoimmunerkrankungen in Serbien: eine retrospektive Studie über 20 Jahre.

    PubMed

    Milinković, Mirjana; Janković, Slavenka; Medenica, Ljiljana; Nikolić, Miloš; Reljić, Vesna; Popadić, Svetlana; Janković, Janko

    2016-10-01

    Die meisten früheren Arbeiten zu den klinisch-epidemiologischen Merkmalen von bullösen Autoimmunerkrankungen (AIBD) konzentrierten sich vor allem auf eine einzige Krankheitsentität oder nur eine Krankheitsgruppe; nur in wenigen Studien wurde die Inzidenz verschiedener AIBD untersucht. Bei der vorliegenden Studie war es unser Ziel, das gesamte Spektrum der AIBD zu betrachten, die Inzidenz der häufigsten AIBD zu ermitteln und die zeitlichen Trends ihres Auftretens in Zentralserbien über einen Zeitraum von 20 Jahren zu untersuchen. Wir rekrutierten retrospektiv 1161 AIBD-Fälle, die in Zentralserbien von Januar 1991 bis Dezember 2010 neu diagnostiziert wurden. Die Diagnose stützte sich auf eine strikte klinische, histologische und immunhistologische Beurteilung. Folgende Inzidenzraten wurden für die einzelnen Erkrankungen ermittelt: 4,35 pro eine Million Einwohner/Jahr (pME/Jahr) für Pemphigus, 4,47 pME/Jahr für Pemphigoid, 1,42 pME/Jahr für Dermatitis herpetiformis (DH), 0,25 pME/Jahr IgA-Dermatose und 0,08 pME/Jahr für Epidermolysis bullosa acquisita. Im betrachteten Zeitraum stieg die altersbereinigte Inzidenzrate für Pemphigus und insbesondere für Pemphigoid signifikant an, während sie für DH, allerdings nicht signifikant, abnahm. Unsere Studie befasst sich zum ersten Mal mit den Inzidenzraten des gesamten Spektrums der AIBD in Serbien und untersucht die zeitlichen Trends ihres Auftretens über einen Zeitraum von 20 Jahren. Nach unserem besten Wissen wurde ein ähnlicher Befund wie der unsere, dass nämlich die Inzidenzraten von Pemphigus und Pemphigoid vergleichbar sind, bisher noch nicht publiziert. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  1. Multiscale Computation. Needs and Opportunities for BER Science

    SciTech Connect

    Scheibe, Timothy D.; Smith, Jeremy C.

    2015-01-01

    The Environmental Molecular Sciences Laboratory (EMSL), a scientific user facility managed by Pacific Northwest National Laboratory for the U.S. Department of Energy, Office of Biological and Environmental Research (BER), conducted a one-day workshop on August 26, 2014 on the topic of “Multiscale Computation: Needs and Opportunities for BER Science.” Twenty invited participants, from various computational disciplines within the BER program research areas, were charged with the following objectives; Identify BER-relevant models and their potential cross-scale linkages that could be exploited to better connect molecular-scale research to BER research at larger scales and; Identify critical science directions that will motivate EMSL decisions regarding future computational (hardware and software) architectures.

  2. Ansätze für eine Bifurkationsanalyse von RF LC-Tank VCOs unter Berücksichtigung nichtlinearer Bauelementegleichungen

    NASA Astrophysics Data System (ADS)

    Zorn, C.; Bremer, J.-K.; Mathis, W.

    2008-05-01

    Es wird ein alternativer Ansatz zum Entwurf von vollintegrierten LC Oszillatoren mit Hilfe der Andronov-Hopf Bifurkationsanalyse unter Einbeziehung eines nichtlinearen Overall-Modells für MOS-Transistoren (EKV-Modell) vorgestellt. Das in dieser Arbeit vorgestellte Verfahren beschreibt die MOS-Kapazität des VCOs über geometrische Gundgrößen, die damit nur als Längen- und Weitenverhältnisse in die Bifurkationsanalyse eingehen. Zur Beschreibung der MOS-Kapazität wurde ein Basic-Charge-Modell, wie es in den Arbeiten von Enz und Vittoz vorgestellt wurde, in Verbindung einer expliziten analytischen Näherung des Oberflächenpotenzials verwendet. Das Verfahren ermöglicht es, als zusätzlichen Freiheitsgrad für den Designer auch die Amplitude zur Optimierung der Bauteilparameter heranzuziehen und vorab eine genauere Abschätzung der Parameter des Varaktors zu erhalten. Zusammengefasst in einer Toolbox führt die Anwendung des Verfahrens auf einen grafischen Optimierungsprozess, mit dessen Hilfe die Parameter analytisch bestimmt werden können. Die verwendete Methode erweitert den von Hajimiri und Ham vorgestellten Entwurfsprozess von LC-Tank VCOs um eine Stabilitätsanalyse, die Berücksichtigung harmonischer höherer Ordnung und die physikalisch exakte Modellierung der Varaktorkapazitäten.

  3. DNA Helicases in NER, BER, and MMR.

    PubMed

    Kuper, Jochen; Kisker, Caroline

    2013-01-01

    Different DNA repair mechanisms have evolved to protect our genome from modifications caused by endogenous and exogenous agents, thus maintaining the integrity of the DNA. Helicases often play a central role in these repair pathways and have shown to be essential for diverse tasks within these mechanisms. In prokaryotic nucleotide excision repair (NER) for example the two helicases UvrB and UvrD assume vastly different functions. While UvrB is intimately involved in damage verification and acts as an anchor for the other prokaryotic NER proteins UvrA and UvrC, UvrD is required to resolve the post-incision complex leading to the release of UvrC and the incised ssDNA fragment. For the XPD helicase in eukaryotic NER a similar function in analogy to UvrB has been proposed, whereas XPB the second helicase uses only its ATPase activity during eukaryotic NER. In prokaryotic mismatch repair (MMR) UvrD again plays a central role. The different tasks of this protein in the different repair pathways highlight the importance of regulative protein-protein interactions to fine-tune its helicase activity. In other DNA repair pathways the role of the helicases involved is sometimes not as well characterized, and no helicase has so far been described to assume the function of UvrD in eukaryotic MMR. RecQ helicases and FancJ interact with eukaryotic MMR proteins but their involvement in this repair pathway is unclear. Lastly, long-patch base excision repair is linked to the WRN helicase and many proteins within this pathway interact with the helicase leading to increased activity of the interacting proteins as observed for pol β and FEN-1 or the helicase itself is negatively regulated through the interaction with APE-1. However, compared to the precise functions described for the helicases in the other DNA repair mechanisms the role of WRN in BER remains speculative and requires further analysis.

  4. Die Welt des Herrn Kuhn

    NASA Astrophysics Data System (ADS)

    Kern, Daniela

    Eines Morgens erwachte Herr Kuhn fröstelnd und staunte darüber, dass es in seinerWohnung eiskalt war. Dennoch quälte er sich aus seiner kuscheligen Bettdecke heraus und schlurfte ins Bad. "Hoffentlich wird wenigstens das Wasser warm", dachte er sich, als er den Wasserhahn betätigte - aber es kam nicht nur kein warmesWasser, außer einem unheilvollen Gluckser kam gar nichts aus der Leitung. "Dann werde ich wohl mal den Klempner anrufen", sprach er sich leise in den Bart und griff zu seinem Handy - doch das Netz war tot! Herr Kuhn begann nun, sich ernsthaft Sorgen zu machen, "Oje, was ist denn heute nur los? Ist irgendetwas Schlimmes passiert?" Um einen besseren Überblick über die Lage zu bekommen und sich austauschen zu können, brannte er nun förmlich darauf, rauszugehen und zur Arbeit zu fahren. An anderen Tagen, die er frisch geduscht und mit Kaffee und Marmeladen-Brot begann, war er selten so motiviert. So ging er also nun mit leerem Magen aus dem Haus. Hätte er den Versuch unternommen, sein tägliches Marmeladenbrot zuzubereiten, und dafür den Kühlschrank geöffnet, um das Marmeladenglas herauszunehmen, wäre ihm aufgefallen, dass auch die Stromversorgung Störungen unterworfen war, unschön zu erkennen an den ersten grünen, felligen Inseln auf seinem Lieblingskäse.

  5. BER evaluations for multimode beams in underwater turbulence

    NASA Astrophysics Data System (ADS)

    Altay Arpali, Serap; Baykal, Yahya; Arpali, Çağlar

    2016-07-01

    In underwater optical communication links, bit error rate (BER) is an important performance criterion. For this purpose, the effects of oceanic turbulence on multimode laser beam incidences are studied and compared in terms of average BER (<BER>), which is related to the scintillation index. Based on the log-normal distribution, <BER> is analysed for underwater turbulence parameters, including the rate of dissipation of the mean squared temperature, the rate of dissipation of the turbulent kinetic energy, the parameter that determines the relative strength of temperature and salinity in driving index fluctuations, the Kolmogorov microscale length and other link parameters such as link length, wavelength and laser source size. It is shown that use of multimode improves the system performance of optical wireless communication systems operating in an underwater medium. For all the investigated multimode beams, decreasing link length, source size, the relative strength of temperature and salinity in driving the index fluctuations, the rate of dissipation of the mean squared temperature and Kolmogorov microscale length improve the <BER>. Moreover, lower <BER> values are obtained for the increasing wavelength of operation and the rate of dissipation of the turbulent kinetic energy in underwater turbulence.

  6. Die histologischen Typen der lymphomatoiden Papulose - Ein Vorschlag für die Vereinfachung des Buchstabenchaos.

    PubMed

    Kempf, Werner; Mitteldorf, Christina; Karai, Laszlo J; Robson, Alistair

    2017-04-01

    Die lymphomatoide Papulose (LYP) ist klinisch durch rezidivierende papulonoduläre Läsionen charakterisiert. Im Gegensatz zu dieser stereotypen klinischen Präsentation zeigt die Erkrankung ein breites histologisches Spektrum mit verschiedenen Infiltratmustern, unterschiedlichen Tumorzellgrößen und variablen Phänotypen. Die revidierte WHO-Klassifikation 2016 umfasst die histologischen LYP-Typen A bis E und einen sechsten Typ, dem eine spezielle Mutation zugrunde liegt. Darüber hinaus werden jedoch immer wieder neue Typen vorgeschlagen, wobei sich die Ausweitung nicht ausschließlich auf histologische Muster bezieht, sondern sich auch auf klinische und genetische Aspekte ausdehnt. Dies führt zu einer Ausweitung der alphabetischen Liste mit zunehmender Komplexität der Terminologie und kann anstelle eines vereinfachten diagnostischen Zugangs zur Verwirrung führen. Zudem kann es zu Überschneidungen unterschiedlicher Typen kommen. Diese Entwicklung wirft die Frage auf, wie die Terminologie der lymphomatoiden Papulose vereinfacht werden kann, ohne dabei auf die histologischen Besonderheiten zu verzichten. Wir schlagen daher einen praktischen Zugang zur Terminologie der lymphomatoide Papulosen vor, welcher sich ausschließlich auf deskriptive Begriffe beschränkt und nicht auf einer alphabetischen Bezeichnung der LYP-Typen beruht. Unser Vorschlag soll einen praktikablen und benutzerfreundlichen Zugang zur Terminologie der lymphomatoiden Papulose ermöglichen und damit den diagnostischen Prozess sowie die Kommunikation zwischen Klinikern und Pathologen vereinfachen. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  7. Das Märchen vom Zauberer im weißen Kittel: Mythen um berühmte Experimente und Experimentatoren

    NASA Astrophysics Data System (ADS)

    Hentschel, Klaus

    2003-09-01

    Um berühmte Experimentatoren und Experimente ranken sich ebenso Mythen wie um geniale Theoretiker. Sie sind in populärwissenschaftlichen Büchern, Lehrbüchern und sogar in wissenschaftshistorischen Texten verbreitet. Die durch die Aufklärung etablierte Kultur des eleganten Schauexperiments vermittelt ein schiefes Bild vom mühsamen Weg vieler Experimentatoren zum dargestellten Ergebnis. Auch der Mythos des einsamen, genialen Experimentators ohne Helfer widerspricht dem historischen Befund. Gleiches gilt für das experimentum crucis, das eine Theorie als entscheidendes Experiment belegen soll. Die historische Forschung zeigt, dass es eine lange, eigenständige Tradition der experimentellen und instrumentellen Arbeit gibt.

  8. "Das Konkrete ist das Abstrakte, an das man sich schließlich gewöhnt hat." (Laurent Schwartz) Über den Ablauf des mathematischen Verstehens

    NASA Astrophysics Data System (ADS)

    Lowsky, Martin

    Die im Titel genannte Aussage findet sich in den Lebenserinnerungen von Laurent Schwartz (1915-2002), einem der fruchtbarsten Mathematiker, Mitglied der Gruppe Bourbaki. Im Original lautet die Aussage: "un objet concret est un objet abstrait auquel on a fini par s'habituer." Schwartz erläutert sie am Beispiel des Integrals über {e^{-1/2{x^2}}} , das den Wert Wurzel aus 2π hat und in dem sich also die Zahlen e und π verknüpfen. Was Schwartz aber vor allem ausdrücken will, ist dies: Das mathematische Verständnisd geht langsam vor sich und es bedarf der Anstrengung. "Es ist eine Frage der Zeit und der Energie", sagt Schwartz, und gerade dies mache es so schwer, die höhere Mathematik unter das Volk zu bringen. Das Lernen und Lehren von Mathematik laufe eben mühevoll und langsam ab.

  9. Physikgeschichte Die Anfänge des Physik-Nobelpreises

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2003-09-01

    Durch Absorption von zwei Laserstrahlen mit unterschiedlichen Wellenlängen können in Halbleitern makroskopische Ströme erzeugt werden. Die Ausbreitungsrichtung der Elektronen und insbesondere die Ausrichtung ihrer Spins lassen sich über die relative Phase der beiden Laserfelder kohärent kontrollieren, wie kürzlich zwei Gruppen an den Universitäten von Marburg und Iowa demonstrierten [1, 2]. Genutzt wird bei diesem Experiment der Effekt der Quanteninterferenz zur Erzeugung von elektrischen Spinströmen.

  10. Unraveling the Mystery of Stöber Silica's Microporosity.

    PubMed

    Li, Shanshan; Wan, Quan; Qin, Zonghua; Fu, Yuhong; Gu, Yuantao

    2016-09-13

    Puzzling aspects of the microporous structure of Stöber silica, including inconsistencies in the BET specific surface area and the long measurement time required for N2 adsorption, hinder further research on and potential applications of this material. In this work, Stöber silica samples prepared using systematic and detailed post-treatment methods were characterized by N2 adsorption, scanning electron microscopy, transmission electron microscopy, inductively coupled plasma optical emission spectrometry, elemental analysis, and Fourier transform infrared spectroscopy. We have found that the often overlooked sample preparation conditions may be the main causes that perplex the gas adsorption characterization results of Stöber silica samples. The pore-blocking processes associated with a variety of sample treatment methods are discussed in detail. Strong evidence for the particle growth model and pore-blocking mechanism involving ethoxyl groups, Si species, and condensation of silanols is provided. A remarkable result is that the measurement time is shortened from 1 month in our previous work to 2-3 days for samples with large specific surface areas. A suitable post-treatment condition is recommended to obtain microporous Stöber silica with a short measurement time, including water washing, low temperature drying without a vacuum, and a short storage time.

  11. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C. Y.; Wallace, J. F.

    1981-01-01

    This investigation determined whether selected ion beam sputtered coatings on H-13 die steel would have the potential of improving the thermal fatigue behavior of the steel used as a die in aluminum die casting. The coatings were selected to test candidate insulators and metals capable of providing protection of the die surface. The studies indicate that 1 micrometer thick W and Pt coatings reduced the thermal fatigue more than any other coating tested and are candidates to be used on a die surface to increase die life.

  12. Study of bit error rate (BER) for multicarrier OFDM

    NASA Astrophysics Data System (ADS)

    Alshammari, Ahmed; Albdran, Saleh; Matin, Mohammad

    2012-10-01

    Orthogonal Frequency Division Multiplexing (OFDM) is a multicarrier technique that is being used more and more in recent wideband digital communications. It is known for its ability to handle severe channel conditions, the efficiency of spectral usage and the high data rate. Therefore, It has been used in many wired and wireless communication systems such as DSL, wireless networks and 4G mobile communications. Data streams are modulated and sent over multiple subcarriers using either M-QAM or M-PSK. OFDM has lower inter simple interference (ISI) levels because of the of the low data rates of carriers resulting in long symbol periods. In this paper, BER performance of OFDM with respect to signal to noise ratio (SNR) is evaluated. BPSK Modulation is used in s Simulation based system in order to get the BER over different wireless channels. These channels include additive white Gaussian Noise (AWGN) and fading channels that are based on Doppler spread and Delay spread. Plots of the results are compared with each other after varying some of the key parameters of the system such as the IFFT, number of carriers, SNR. The results of the simulation give visualization of what kind of BER to expect when the signal goes through those channels.

  13. Darwin, Engels und die Rolle der Arbeit in der biologischen und kulturellen Evolution des Menschen

    NASA Astrophysics Data System (ADS)

    Reichholf, Josef H.

    Im Jahre 1876, 5 Jahre nach Erscheinen von Darwins Buch über die Evolution des Menschen und die sexuelle Selektion (Darwin 1871), veröffentlichte Friedrich Engels den berühmt gewordenen Essay "Anteil der Arbeit an der Menschwerdung des Affen“ (Engels 1876). Die Kernfrage darin lautet in Kurzform: Warum hat der Mensch eigentlich ein Bedürfnis nach Arbeit? Engels Antwort wird nachfolgend näher betrachtet und vom gegenwärtigen Kenntnisstand aus beurteilt. Wie sich zeigen wird, beantworten seine Überlegungen die Frage nicht wirklich. Sie ist weiterhin offen. Es können lediglich einige zusätzliche Anhaltspunkte zur Diskussion gestellt werden. Angesichts des drängenden Problems millionenfacher Arbeitslosigkeit und der Forderungen nach einem "Grundrecht auf Arbeit“ kommt den Überlegungen zum möglichen Ursprung des Bedürfnisses nach Arbeit mehr als nur akademisches Interesse zu.

  14. Wege in die Zukunft

    NASA Astrophysics Data System (ADS)

    Kauermann, Göran; Mosler, Karl

    Die Zukunft stellt große Herausforderungen an die Arbeit der Deutschen Statistischen Gesellschaft. Sie betreffen die gestiegenen Anforderungen der Nutzer von Statistik, die Kommunikationsmöglichkeiten des Internets sowie die Dynamik der statistischen Wissenschaften und ihrer Anwendungsgebiete. Das Kapitel 5 beschreibt, wie sich die Gesellschaft diesen Herausforderungen stellt und welche Ziele sie sich in der wissenschaftlichen Zusammenarbeit und im Kampf gegen das Innumeratentum gesetzt hat.

  15. Low Temperature Plasma Kills SCaBER Cancer Cells

    NASA Astrophysics Data System (ADS)

    Barekzi, Nazir; van Way, Lucas; Laroussi, Mounir

    2013-09-01

    Squamous cell carcinoma of the bladder is a rare type of bladder cancer that forms as a result of chronic irritation of the epithelial lining of the bladder. The cell line used in this study is SCaBER (ATCC® HTB-3™) derived from squamous cell carcinoma of the human urinary bladder. Current treatments of bladder cancer include surgery, radiation and chemotherapy. However, the cost of these treatments, the potential toxicity of the chemotherapeutic agents and the systemic side-effects warrant an alternative to current cancer treatment. This paper represents preliminary studies to determine the effects of biologically tolerant plasma (BTP) on a cell line of human bladder cancer cells. Previous work by our group using the plasma pencil revealed the efficacy of BTP on leukemia cells suspended in solution. Based on these earlier findings we hypothesized that the plasma exposure would elicit a similar programmed cell death in the SCaBER cells. Trypan blue exclusion and MTT assays revealed the cell killing after exposure to BTP. Our study indicates that low temperature plasma generated by ionizing helium gas and the reactive species may be a suitable and safe alternative for cancer therapy.

  16. Der Einfluss von Alitretinoin auf die Lebensqualität bei Patienten mit schwerem chronischen Handekzem: FUGETTA - Beobachtungsstudie unter Praxisbedingungen.

    PubMed

    Augustin, Matthias; Thaçi, Diamant; Kamps, Anja

    2016-12-01

    Alitretinoin ist die einzige zugelassene Behandlung für schweres chronisches Handekzem (CHE), das refraktär gegenüber potenten topischen Corticosteroiden ist. Bei dieser Studie (FUGETTA) wurde die Wirksamkeit von leitliniengerecht angewendetem oralem Alitretinoin sowie dessen Einfluss auf die Lebensqualität (LQ) bei Patienten mit schwerem refraktärem CHE beurteilt. Multizentrische, offene, nichtinterventionelle Beobachtungsstudie, durchgeführt in Deutschland. Die Patienten wurden nach Ermessen ihres behandelnden Arztes mit Alitretinoin 10 mg oder 30 mg einmal täglich über maximal 24 Wochen behandelt. Die Wirksamkeit wurde anhand des Physician Global Assessment (PGA) und des Dermatology Life Quality Index (DLQI) bewertet. Zudem wurden unerwünschte Ereignisse (UE) erfasst. Die Studienpopulation bestand aus 658 Patienten (30 mg: n = 581; 10 mg: n = 77). Bei Beobachtungsbeginn litten die meisten Patienten (83 %) gemäß PGA an einem schweren CHE. Bei Beobachtungsende war das Handekzem bei 48 % der Patienten gemäß PGA vollständig oder fast vollständig abgeheilt (30 mg: 49 %; 10 mg: 43 %). Die mittlere Verbesserung des DLQI-Scores in Woche 24 betrug 58 % (30 mg: mittlere [SD] Veränderung gegenüber dem Ausgangswert -10,4 [8,04]) und 70 % (10 mg: mittlere [SD] Veränderung gegenüber dem Ausgangswert -10,8 [7,29]). Die Gesamtinzidenz von NW war niedrig und in den beiden Gruppen ähnlich. Alitretinoin führte zu einer schnellen, deutlichen Verbesserung der LQ bei Patienten mit schwerem CHE. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  17. Mutual coupling, channel model, and BER for curvilinear antenna arrays

    NASA Astrophysics Data System (ADS)

    Huang, Zhiyong

    This dissertation introduces a wireless communications system with an adaptive beam-former and investigates its performance with different antenna arrays. Mutual coupling, real antenna elements and channel models are included to examine the system performance. In a beamforming system, mutual coupling (MC) among the elements can significantly degrade the system performance. However, MC effects can be compensated if an accurate model of mutual coupling is available. A mutual coupling matrix model is utilized to compensate mutual coupling in the beamforming of a uniform circular array (UCA). Its performance is compared with other models in uplink and downlink beamforming scenarios. In addition, the predictions are compared with measurements and verified with results from full-wave simulations. In order to accurately investigate the minimum mean-square-error (MSE) of an adaptive array in MC, two different noise models, the environmental and the receiver noise, are modeled. The minimum MSEs with and without data domain MC compensation are analytically compared. The influence of mutual coupling on the convergence is also examined. In addition, the weight compensation method is proposed to attain the desired array pattern. Adaptive arrays with different geometries are implemented with the minimum MSE algorithm in the wireless communications system to combat interference at the same frequency. The bit-error-rate (BER) of systems with UCA, uniform rectangular array (URA) and UCA with center element are investigated in additive white Gaussian noise plus well-separated signals or random direction signals scenarios. The output SINR of an adaptive array with multiple interferers is analytically examined. The influence of the adaptive algorithm convergence on the BER is investigated. The UCA is then investigated in a narrowband Rician fading channel. The channel model is built and the space correlations are examined. The influence of the number of signal paths, number of the

  18. BER Science Network Requirements Workshop -- July 26-27,2007

    SciTech Connect

    Tierney, Brian L.; Dart, Eli

    2008-02-01

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States of America. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In July 2007, ESnet and the Biological and Environmental Research (BER) Program Office of the DOE Office of Science organized a workshop to characterize the networking requirements of the science programs funded by the BER Program Office. These included several large programs and facilities, including Atmospheric Radiation Measurement (ARM) Program and the ARM Climate Research Facility (ACRF), Bioinformatics and Life Sciences Programs, Climate Sciences Programs, the Environmental Molecular Sciences Laboratory at PNNL, the Joint Genome Institute (JGI). National Center for Atmospheric Research (NCAR) also participated in the workshop and contributed a section to this report due to the fact that a large distributed data repository for climate data will be established at NERSC, ORNL and NCAR, and this will have an effect on ESnet. Workshop participants were asked to codify their requirements in a 'case study' format, which summarizes the instruments and facilities necessary for the science and the process by which the science is done, with emphasis on the network services needed and the way in which the network is used. Participants were asked to consider three time scales in their case studies--the near term (immediately and up to 12 months in the future), the medium term (3-5 years in the future), and the long term (greater than 5 years in the future). In addition to achieving its goal of collecting and characterizing

  19. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1982-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  20. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1984-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  1. Packaged die heater

    DOEpatents

    Spielberger, Richard; Ohme, Bruce Walker; Jensen, Ronald J.

    2011-06-21

    A heater for heating packaged die for burn-in and heat testing is described. The heater may be a ceramic-type heater with a metal filament. The heater may be incorporated into the integrated circuit package as an additional ceramic layer of the package, or may be an external heater placed in contact with the package to heat the die. Many different types of integrated circuit packages may be accommodated. The method provides increased energy efficiency for heating the die while reducing temperature stresses on testing equipment. The method allows the use of multiple heaters to heat die to different temperatures. Faulty die may be heated to weaken die attach material to facilitate removal of the die. The heater filament or a separate temperature thermistor located in the package may be used to accurately measure die temperature.

  2. The Ambiguous Dying Syndrome

    ERIC Educational Resources Information Center

    Bern-Klug, Mercedes

    2004-01-01

    More than one-half of the 2.4 million deaths that will occur in the United States in 2004 will be immediately preceded by a time in which the likelihood of dying can best be described as "ambiguous." Many people die without ever being considered "dying" or "at the end of life." These people may miss out on the…

  3. The Ambiguous Dying Syndrome

    ERIC Educational Resources Information Center

    Bern-Klug, Mercedes

    2004-01-01

    More than one-half of the 2.4 million deaths that will occur in the United States in 2004 will be immediately preceded by a time in which the likelihood of dying can best be described as "ambiguous." Many people die without ever being considered "dying" or "at the end of life." These people may miss out on the…

  4. Phenolic acids composition of fruit extracts of Ber (Ziziphus mauritiana L., var. Golo lemai)

    USDA-ARS?s Scientific Manuscript database

    Fruits of Ziziphus mauritiana L. (ber) are consumed in fresh and dried/processed form in many countries across Asia including Pakistan. In the present study, we analyzed the composition of total phenolic acids (free, soluble-bound and insoluble-bound) from Golo lemai ber fruit extracts by applying a...

  5. Verbesserte Ausbildung für neue Betriebsleiter und -ingenieure - eine wichtige Investition in die Zukunft

    NASA Astrophysics Data System (ADS)

    Franta, Oliver

    Bedingt durch die Globalisierung und die damit einhergehende Verschärfung des Wettbewerbs befinden sich die Produktionsbetriebe der chemischen Industrie in stetigem Wandel. Für Betriebsleiter und Betriebsingenieure werden damit Fähigkeiten wie Kostenmanagement, Sozial- und Organisationskompetenz, Führungsqualifikationen und unternehmerisches Handeln immer wichtiger. Neben den Anforderungsprofilen bei Neueinstellungen ist dies auch bei der Fortbildung zu berücksichtigen. Das Trainingsprogramm der Evonik Degussa wurde daher durch die Konzeption neuer Seminare und die Anpassung bestehender Weiterbildungsmaßnahmen weiterentwickelt. Neben Vorträgen und Fallbeispielen sind ebenfalls die Durchführung von Planspielen sowie das Kennenlernen eines Produktionsbetriebes einer anderen Organisationseinheit enthalten. Ziel ist es vor allem die unternehmerische Orientierung neuer Betriebsleiter und -ingenieure zu fördern, die Innovationsgeschwindigkeit zu erhöhen und durch Kenntnis und Nutzung bereits anderweitig entwickelter Lösungen und Methoden die Produktivität zu steigern. Die Produktionsmeister werden aufgrund der Bedeutung dieser Funktion für die Führung der Mitarbeiter und bei der Umsetzung von Veränderungsprojekten in das Ausbildungsprogramm einbezogen. Der Erfolg des Trainingsprogramms zeigt sich an den Teilnehmerzahlen und den ausgesprochen positiven Rückmeldungen.

  6. HIGH PRESSURE DIES

    DOEpatents

    Wilson, W.B.

    1960-05-31

    A press was invented for subjecting specimens of bismuth, urania, yttria, or thoria to high pressures and temperatures. The press comprises die parts enclosing a space in which is placed an electric heater thermally insulated from the die parts so as not to damage them by heat. The die parts comprise two opposed inner frustoconical parts and an outer part having a double frustoconical recess receiving the inner parts. The die space decreases in size as the inner die parts move toward one another against the outer part and the inner parts, though very hard, do not fracture because of the mode of support provided by the outer part.

  7. Meckel-Grüber syndrome: sonography and pathology.

    PubMed

    Ickowicz, V; Eurin, D; Maugey-Laulom, B; Didier, F; Garel, C; Gubler, M C; Laquerrière, A; Avni, E F

    2006-03-01

    To define a specific sonographic pattern for the appearance of the kidneys in fetuses affected by Meckel-Grüber syndrome (MGS). This was a retrospective analysis of 30 cases, collected from five centers, with ultrasound features suggestive of MGS. Only fetuses with a confirmed diagnosis of MGS were finally included. Analysis included a detailed evaluation of the sonographic findings and comparison with pathological follow-up. Seventeen cases met the pathological criteria for a diagnosis of MGS and were included in the study. In all cases, a typical sonographic pattern was seen: the kidneys were enlarged (mean, + 4.8 SD) and showed unusual corticomedullary differentiation, occurring as early as the first trimester. In most cases, the medullary areas appeared excessively large and mottled due to the presence of multiple small cysts. The kidneys of fetuses with MGS are enlarged, cystic and have unusual corticomedullary differentiation. These features can be observed as early as the first and early second trimesters. 2006 ISUOG. Published by John Wiley & Sons, Ltd.

  8. Series solutions for π/4-DQPSK BER with MRC

    NASA Astrophysics Data System (ADS)

    Chandra, Aniruddha; Bose, Chayanika

    2012-03-01

    Simple series expressions for bit error rate (BER) of π/4 shifted differential quaternary phase-shift keying (π/4-DQPSK) over some common fading environments (Rayleigh, Rician and Nakagami-m) are derived. Both single- and multi-channel reception scenarios are considered. In case of multi-antenna reception, it is assumed that the fading is independent and identically distributed (IID), and the receiver follows optimum maximal ratio combining (MRC). The derived expressions, computed through probability density function (PDF)-based approach, give an exact match with moment-generating function (MGF)-based solutions but get rid of numerical integrations involved in MGF approach. Further, the analytical results presented in this article consist of finite or rapidly converging infinite series and thus a trade-off between precision and complexity can be easily realised by choosing a specific number of terms. Bounds on the error resulting from truncation of the infinite series are also derived. Moreover, it was shown that the series solutions, when reasonably truncated, still provide better approximations than the previous attempts.

  9. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C.-Y.; Wallace, J. F.

    1981-01-01

    Three experimental research designs investigating candidate materials and processes involved in protective die surface coating procedures by sputter deposition, using ion beam technologies, are discussed. Various pre-test results show that none of the coatings remained completely intact for 15,000 test cycles. The longest lifetime was observed for coatings such as tungsten, platinum, and molybdenum which reduced thermal fatigue, but exhibited oxidation and suppressed crack initiation only as long as the coating did not fracture. Final test results confirmed earlier findings and coatings with Pt and W proved to be the candidate materials to be used on a die surface to increase die life. In the W-coated specimens, which remained intact on the surface after thermal fatigue testing, no oxidation was found under the coating, although a few cracks formed on the surface where the coating broke down. Further research is planned.

  10. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C.-Y.; Wallace, J. F.

    1981-01-01

    Three experimental research designs investigating candidate materials and processes involved in protective die surface coating procedures by sputter deposition, using ion beam technologies, are discussed. Various pre-test results show that none of the coatings remained completely intact for 15,000 test cycles. The longest lifetime was observed for coatings such as tungsten, platinum, and molybdenum which reduced thermal fatigue, but exhibited oxidation and suppressed crack initiation only as long as the coating did not fracture. Final test results confirmed earlier findings and coatings with Pt and W proved to be the candidate materials to be used on a die surface to increase die life. In the W-coated specimens, which remained intact on the surface after thermal fatigue testing, no oxidation was found under the coating, although a few cracks formed on the surface where the coating broke down. Further research is planned.

  11. Die singulation method

    DOEpatents

    Swiler, Thomas P [Albuquerque, NM; Garcia, Ernest J [Albuquerque, NM; Francis, Kathryn M [Rio Rancho, NM

    2014-01-07

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with a HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  12. Die singulation method

    DOEpatents

    Swiler, Thomas P.; Garcia, Ernest J.; Francis, Kathryn M.

    2013-06-11

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with an HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  13. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-04-26

    A method and die apparatus for manufacturing a honeycomb body of rhombic cell cross-section by extrusion through an extrusion die of triangular cell discharge slot configuration, the die incorporating feedholes at selected slot intersections only, such that slot segments communicating directly with the feedholes discharge web material and slot segments not so connected do not discharge web material, whereby a rhombic cell cross-section in the extruded body is provided.

  14. Der Körper der Craniota und die Differenzierung seiner Grundgestalt

    NASA Astrophysics Data System (ADS)

    Rieger, Reinhard; Maier, Wolfgang; Goldschmid, Alfred; Westheide, Wilfried

    Die rezenten Wirbeltiere — die wir nun auf Grund ihres wichtigsten Schlüsselmerkmals generell Cranioten oder Schädeltiere nennen sollten (s. a. S. 5) — umfassen nah ezu 50.000 Arten. Nach allgemeinen Schätzungen sind dies etwa 1% der Tiere dieses Taxons, die jemals existierten. Bis heute wurden mehrere zehntausend fossiler Arten nachgewiesen, und ständig kommen neue Fossilfunde hinzu. Die ältesten eindeutig als Craniota anzusprechenden Fossilfunde haben ein Alter von etwa 545 Mio. Jahren (S. 187). Paläontologie und Paläobiologie rekonstruierten eingehend Aussehen und Lebensweise vieler dieser ausgestorbenen Arten. Viele Verwandtschaftsbeziehungen zwischen den rezenten Wirbeltiertaxa werden nur unter Berücksichtigung dieser Fossilformen verständlich.

  15. The Angry Dying Patient.

    PubMed

    Houston, Robert E.

    1999-02-01

    Over 25 years ago, Kubler-Ross identified anger as a predictable part of the dying process. When the dying patient becomes angry in the clinical setting, all types of communication become strained. Physicians can help the angry dying patient through this difficult time by using 10 rules of engagement. When physicians engage and empathize with these patients, they improve the patient's response to pain and they reduce patient suffering. When physicians educate patients on their normal responses to dying and enlist them in the process of family reconciliation, they can impact the end-of-life experience in a positive way.

  16. Die Soldering in Aluminium Die Casting

    SciTech Connect

    Han, Q.; Kenik, E.A.; Viswanathan, S.

    2000-03-15

    Two types of tests, dipping tests and dip-coating tests were carried out on small steel cylinders using pure aluminum and 380 alloy to investigate the mechanism of die soldering during aluminum die casting. Optical and scanning electron microscopy were used to study the morphology and composition of the phases formed during soldering. A soldering mechanism is postulated based on experimental observations. A soldering critical temperature is postulated at which iron begins to react with aluminum to form an aluminum-rich liquid phase and solid intermetallic compounds. When the temperature at the die surface is higher than this critical temperature, the aluminum-rich phase is liquid and joins the die with the casting during the subsequent solidification. The paper discusses the mechanism of soldering for the case of pure aluminum and 380 alloy casting in a steel mold, the factors that promote soldering, and the strength of the bond formed when soldering occurs. conditions, an aluminum-rich soldering layer may also form over the intermetallic layer. Although a significant amount of research has been conducted on the nature of these intermetallics, little is known about the conditions under which soldering occurs.

  17. Is Dying Young Worse than Dying Old?

    ERIC Educational Resources Information Center

    Jecker, Nancy S.; Schneiderman, Lawrence J.

    1994-01-01

    Notes that, in contemporary Western society, people feel death of small child is greater injustice than death of older adult and experience correspondingly greater sorrow, anger, regret, or bitterness when very young person dies. Contrasts these attitudes with those of ancient Greece and shows relevance that different attitudes toward death have…

  18. Is Dying Young Worse than Dying Old?

    ERIC Educational Resources Information Center

    Jecker, Nancy S.; Schneiderman, Lawrence J.

    1994-01-01

    Notes that, in contemporary Western society, people feel death of small child is greater injustice than death of older adult and experience correspondingly greater sorrow, anger, regret, or bitterness when very young person dies. Contrasts these attitudes with those of ancient Greece and shows relevance that different attitudes toward death have…

  19. Pultrusion Die Assembly

    NASA Technical Reports Server (NTRS)

    Wilson, Maywood L. (Inventor); Johnson, Gary S. (Inventor); Frye, Mark W. (Inventor); Stanfield, Clarence E. (Inventor)

    1988-01-01

    This invention relates generally to pultrusion die assemblies, and more particularly, to a pultrusion die assembly which incorporates a plurality of functions in order to produce a continuous, thin composite fiber reinforced thermoplastic material. The invention is useful for making high performance thermoplastic composite materials in sheets which can be coiled on a spool and stored for further processing.

  20. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-05-03

    A method and die apparatus for manufacturing a honeycomb body of triangular cell cross-section and high cell density, the die having a combination of (i) feedholes feeding slot intersections and (ii) feedholes feeding slot segments not supplied from slot intersections, whereby a reduction in feedhole count is achieved while still retaining good extrusion efficiency and extrudate uniformity.

  1. Micromechanical die attachment surcharge

    DOEpatents

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  2. Extrusion die and method

    SciTech Connect

    Lipp, G.D.

    1994-05-03

    A method and die apparatus for manufacturing a honeycomb body of triangular cell cross-section and high cell density, the die having a combination of (i) feedholes feeding slot intersections and (ii) feedholes feeding slot segments not supplied from slot intersections, whereby a reduction in feedhole count is achieved while still retaining good extrusion efficiency and extrudate uniformity. 4 figures.

  3. Accurate BER evaluation for lumped DPSK and OOK systems with PMD and PDL

    NASA Astrophysics Data System (ADS)

    Zhang, Zhongxi; Chen, Liang; Bao, Xiaoyi

    2007-07-01

    New forms using Dirac bra-ket notations and their transformations to express electrically filtered currents are presented for optical systems using either binary differential phase-shift keying (2-DPSK) or ON-OFF keying (OOK) with lumped first-order PMD and PDL, arbitrary optical and electrical filtering and pulse shaping. Based on these forms, the moment generating functions (MGFs) and bit-error-ratios (BERs) for different systems are obtained. Our results show that, for a given BER, 2-DPSK requires ~ 5dB lower input signal-to-noise ratio than OOK. By comparing BERs for different polarization systems, we also show that the PDL-induced partially polarized noise can significantly improve system performance and reduce BER variation caused by the random couplings between signal polarization, PDL and PMD vectors.

  4. BER Performance Analysis of MC-CDMA with Overlap-FDE

    NASA Astrophysics Data System (ADS)

    Tomeba, Hiromichi; Takeda, Kazuaki; Adachi, Fumiyuki

    Recently, multi-carrier code division multiple access (MC-CDMA) has been attracting much attention as a broadband wireless access technique for the next generation mobile communication systems. Frequency-domain equalization (FDE) based on the minimum mean square error (MMSE) criterion can take advantage of the channel frequency-selectivity and improve the average bit error rate (BER) performance due to frequency-diversity gain. The conventional FDE requires the insertion of the guard interval (GI) to avoid the inter-block interference (IBI), resulting in the transmission efficiency loss. In this paper, an overlap FDE technique, which requires no GI insertion, is presented for MC-CDMA transmission. An expression for the conditional BER is derived for the given set of channel gains. The average BER performance in a frequency-selective Rayleigh fading channel is evaluated by Monte-Carlo numerical computation method using the derived conditional BER and is confirmed by computer simulation of the signal transmission.

  5. MIMO-OFDM Precoding Technique for Minimizing BER Upper Bound of MLD

    NASA Astrophysics Data System (ADS)

    Pitakdumrongkija, Boonsarn; Fukawa, Kazuhiko; Suzuki, Hiroshi; Hagiwara, Takashi

    This paper proposes a new MIMO-OFDM precoding technique that aims to minimize a bit error rate (BER) upper bound of the maximum likelihood detection (MLD) in mobile radio communications. Using a steepest descent algorithm, the proposed method estimates linear precoding matrices that can minimize the upper bound of BER under power constraints. Since the upper bound is derived from all the pairwise error probabilities, this method can effectively optimize overall Euclidean distances between signals received by multiple antennas and their replicas. Computer simulations evaluate the BER performance and channel capacity of the proposed scheme for 2×2 and 4×4 MIMO-OFDM systems with BPSK, QPSK, and 16QAM. It is demonstrated that the proposed precoding technique is superior in terms of average BER to conventional precoding methods including a precoder which maximizes only the minimum Euclidean distance as the worst case.

  6. Draft Genome Sequence of Desulfovibrio BerOc1, a Mercury-Methylating Strain

    PubMed Central

    Gassie, Claire; Bouchez, Oliver; Klopp, Christophe; Guyoneaud, Rémy

    2017-01-01

    ABSTRACT Desulfovibrio BerOc1 is a sulfate-reducing bacterium isolated from the Berre lagoon (French Mediterranean coast). BerOc1 is able to methylate and demethylate mercury. The genome size is 4,081,579 bp assembled into five contigs. We identified the hgcA and hgcB genes involved in mercury methylation, but not those responsible for mercury demethylation. PMID:28104657

  7. Draft Genome Sequence of Desulfovibrio BerOc1, a Mercury-Methylating Strain.

    PubMed

    Goñi Urriza, Marisol; Gassie, Claire; Bouchez, Oliver; Klopp, Christophe; Guyoneaud, Rémy

    2017-01-19

    Desulfovibrio BerOc1 is a sulfate-reducing bacterium isolated from the Berre lagoon (French Mediterranean coast). BerOc1 is able to methylate and demethylate mercury. The genome size is 4,081,579 bp assembled into five contigs. We identified the hgcA and hgcB genes involved in mercury methylation, but not those responsible for mercury demethylation.

  8. Revision of the South American window fly genus Heteromphrale Kröber, 1937 (Diptera, Scenopinidae)

    PubMed Central

    Winterton, Shaun L.; Gaimari, Stephen D.

    2011-01-01

    Abstract The Neotropical window fly genus Heteromphrale Kröber, 1937 is revised. Two previously described species (Heteromphrale chilensis (Kröber, 1937) and Heteromphrale cyanops (Edwards, 1932)) are redescribed while a new species (Heteromphrale blanca sp. n.) is described from Argentina. The male of Heteromphrale chilensis and female of Heteromphrale cyanops are described and figured for the first time, and a key to species is presented. PMID:21594165

  9. Die Kometenmission Rosetta

    NASA Astrophysics Data System (ADS)

    Krüger, Harald

    2016-11-01

    Die Rosetta-Mission ist ein Meilenstein in der Erforschung der Kometen und ihrer Entstehung. Eine der größten üerraschungen war die unregelmäßge hantelförmige Gestalt des Zielkometen 67P/Tschurjumow-Gerassimenko. Er besteht wahrscheinlich aus zwei Einzelkörpern, die durch ihre Schwerkraft aneinander gehalten werden. Seine Oberfläche ist sehr rau und zeigt eine sehr vielf ältige Morphologie, die auf eine Vielzahl von ablaufenden Prozessen hindeutet. Der Kometenkern ist vermutlich auf Gr ößnskalen von mehr als etwa 10 bis 100 Metern homogen, Inhomogenitäten auf kleineren Skalen k nnten f r seine Aktivä t verantwortlich sein. Diese ist auf kleine Gebiete konzentriert, und auch Oberflächenveränderungen, die sich innerhalb von einigen Tagen bis wenigen Wochen abspielen, sind lokal. Im Kometenmaterial wurde eine Vielzahl an organischen Substanzen gemessen, die zum Teil als Schlüsselmoleküle für die Synthese der Grundbausteine des Lebens gelten, wie wir es kennen.

  10. Death, dying, and domination.

    PubMed

    Spindelman, Marc

    2008-06-01

    This Article critiques conventional liberal arguments for the right to die on liberal grounds. It contends that these arguments do not go far enough to recognize and address private, and in particular structural, forms of domination. It presents an alternative that does, which is thus more respectful of true freedom in the context of death and dying, and also more consistent with liberalism. After discussing obstacles to the achievement of a right to die that encompasses freedom from both public and private domination, the Article closes with a significant reform project within bioethics that might help bring it about.

  11. Die Zeitung der Zukunft

    NASA Astrophysics Data System (ADS)

    Wieser, Christoph; Schaffert, Sebastian

    Schon lange wird spekuliert, wie wir in Zukunft Zeitung lesen werden. Werden wir am Frühstückstisch wie gewohnt in einer Zeitung aus Papier schmökern oder werden wir die Zeitung als biegsame Folie beschrieben mit elektronischer Tinte in Händen halten? Wird die Zeitung mit anderen Medien wie Radio und Fernsehen verschmelzen? Viele Varianten sind denkbar. Heute lässt sich schon ein Trend ablesen: Immer mehr Leser entdecken die Online-Zeitung als Informationsmedium, eine Voraussetzung für die Nutzung neuer Technologien in der Zeitung der Zukunft. In diesem Kapitel stellen wir Entwicklungsmöglichkeiten der Online-Zeitung dar, wie sie im Social Semantic Web möglich werden.

  12. Assisted Dying & Disability.

    PubMed

    Riddle, Christopher A

    2017-07-01

    This article explores at least two dominant critiques of assisted dying from a disability rights perspective. In spite of these critiques, I conclude that assisted dying ought to be permissible. I arrive at the conclusion that if we respect and value people with disabilities, we ought to permit assisted dying. I do so in the following manner. First, I examine recent changes in legislation that have occurred since the Royal Society of Canada Expert Panel on End-of-Life Decision-Making report, published in this journal. I suggest that these changes are likely to only strengthen opposition to assisted dying from disability rights activists and people with disabilities. Second, I focus on respect for people with disabilities and in particular, respect for their autonomy and decision-making abilities. Third, I explore the opposition to assisted dying that focuses on risk and the vulnerability of people with disabilities. Here I suggest that this risk ought not to be of special concern. Ultimately, I conclude that upholding respect for the disabled requires the legalization of assisted dying, rather than the denial of access in a misguided effort to protect people with disabilities. © 2017 John Wiley & Sons Ltd.

  13. Nichtrigide Bildregistrierung für die adaptive Strahlentherapie mittels Free Form Deformation

    NASA Astrophysics Data System (ADS)

    Wurst, Gernot; Bendl, Rolf

    Im Rahmen der Adaptiven Strahlentherapie müssen zum Behandlungszeitpunkt Abweichungen der aktuellen Patientengeometrie von den Planungsdaten bekannt sein, damit eine Anpassung des Bestrahlungsplans vorgenommen werden kann. State of the Art ist in diesem Zusammenhang die rigide Registrierung von Planungs- und Kontrolldaten. Hierbei werden jedoch komplexere, nichtrigide Deformationen nicht angemessen berücksichtigt. Daher wurde ein Verfahren entwickelt, das diese komplexen Deformationen durch ein Free Form-Deformationsmodell beschreibt. Die dafür vorzugebenden Translationsvektoren wurden durch Template Matching bestimmt. Es zeigte sich, dass die vorhandenen Deformationen weitgehend erkannt werden. Weiterhin ist das Verfahren aufgrund seines günstigen Laufzeitverhaltens prädestiniert für die Adaptive Strahlentherapie.

  14. Einsatz einer Echtzeit-Publish/Subscribe-Kommunikation für die Teleoperation mobiler Roboter

    NASA Astrophysics Data System (ADS)

    Lindhorst, Timo; Herms, André; Schulze, Michael

    In der Telerobotik werden mobile Roboter über ein Kommunikationsnetz durch einen Operator ferngesteuert. Um interaktiv zu operieren, mussen Daten in beide Richtungen in Echtzeit kommuniziert werden. Zusätzlich ist eine hohe Ausfallsicherheit des Systems zu gewährleisten. Diese Arbeit beschreibt die Umsetzung ernes solchen Szenarios unter Verwendung einer Echtzeit-Publish/Subscribe-Kommunikation. Ein drahtloses Mesh-Netzwerk erfüllt durch redundante Verbindungen die Anforderungen an die Kommunikation. Eine Publish/Subscribe-Middleware ermöglicht eine inhaltsbasierte Kommunikation und erlaubt dadurch eine hohe Flexibilität der Teilnehmer. Durch die modulare Software-Architektur der Applikationen entsteht ein verteiltes System, in dem mobile Roboter durch netzwerktransparente Kommunikation gesteuert werden.

  15. Effect of non-Kolmogorov turbulence on BER performance in uplink ground-to-satellite laser communication

    NASA Astrophysics Data System (ADS)

    Wang, Yi; Zhang, Ao; Ma, Jing; Guo, Qiang

    2016-12-01

    Based on the non-Kolmogorov turbulence model of the stratosphere, a theoretical model for the influence of the angle of arrival (AOA) fluctuations on the performance of the bit error rate (BER) is established. A closed form expression of BER is then derived based on this model. Then, considering the combined effect of scintillation, beam wander and AOA fluctuations, the probability density function of the received intensity and the closed form expressions of BER for uplink are derived. Coherent detection of Circle Polarization Shift Keying modulation which is suitable for ground-to-satellite laser communication is employed. For an uplink, the BER performance is emulation analyzed and compared to the condition without taking AOA fluctuations into account. And the variation of BER as a function of AOA fluctuations has also been researched. The influence of intensity scintillation, beam wander and AOA fluctuations on BER has been analyzed based on laser transmit power restrictions.

  16. Theoretical analysis of BER performance of nonlinearly amplified FBMC/OQAM and OFDM signals

    NASA Astrophysics Data System (ADS)

    Bouhadda, Hanen; Shaiek, Hmaied; Roviras, Daniel; Zayani, Rafik; Medjahdi, Yahia; Bouallegue, Ridha

    2014-12-01

    In this paper, we introduce an analytical study of the impact of high-power amplifier (HPA) nonlinear distortion (NLD) on the bit error rate (BER) of multicarrier techniques. Two schemes of multicarrier modulations are considered in this work: the classical orthogonal frequency division multiplexing (OFDM) and the filter bank-based multicarrier using offset quadrature amplitude modulation (FBMC/OQAM), including different HPA models. According to Bussgang's theorem, the in-band NLD is modeled as a complex gain in addition to an independent noise term for a Gaussian input signal. The BER performance of OFDM and FBMC/OQAM modulations, transmitting over additive white Gaussian noise (AWGN) and Rayleigh fading channels, is theoretically investigated and compared to simulation results. For simple HPA models, such as the soft envelope limiter, it is easy to compute the BER theoretical expression. However, for other HPA models or for real measured HPA, BER derivation is generally intractable. In this paper, we propose a general method based on a polynomial fitting of the HPA characteristics and we give theoretical expressions for the BER for any HPA model.

  17. Die einzelnen Beanspruchungsarten

    NASA Astrophysics Data System (ADS)

    Böge, Gert; Böge, Wolfgang

    Wird ein Stab mit beliebigem, gleichbleibendem Querschnitt durch die äußere Kraft F in der Schwerachse auf Zug oder Druck beansprucht, so wird bei gleichmäßiger Spannungsverteilung, also in genügender Entfernung vom Angriffspunkt der Kraft, die Zug- oder Druckspannung σ_{z,d}= Zug- oder Druckkraft F/Querschnittsfläche A {Zug- und Druck-Hauptgleichung} σ_{z,d}=F/A\\qquad σ&F&A N/mm2 & N&mm2 Je nach vorliegender Aufgabe kann die Hauptgleichung umgestellt werden zur Berechnung des erforderlichen Querschnitts (Querschnittsnachweis): A_{erf}=F/σ_{zul} Berechnung der vorhandenen Spannung (Spannungsnachweis): σ_{vorh}=F/A Berechnung der maximal zulässigen Belastung (Belastungsnachweis): F_{max}=σ_{zul}A Treten Zug- und Druckspannungen in einer Rechnung gleichzeitig auf, werden sie durch den Index z und d oder durch das Vorzeichen + und - unterschieden.

  18. Orthogonal optical label swapping and novel BER algorithm for 8PSK signal

    NASA Astrophysics Data System (ADS)

    Tang, Chanjuan; Tao, Li; Li, Rongling; Fang, Wuliang; Zou, Shumin; Chi, Nan

    2011-12-01

    For the first time, we propose a novel BER estimation algorithm for 8PSK signal, the idea of which is also applicable to other multi-dimensional and multi-level modulation formats. And a 2 × 4 orthogonal optical label swapping based on 120Gb/s 8PSK payload and 78Mb/s ASK label by using optical switching devices is demonstrated. Through numerical simulations under different circumstances, we get some orthogonal label switching network's characteristics by analyzing the receiver BER utilizing the new BER algorithm, such as that different combination of label will have a different impact on the transmission performance of the packets. In addition, by changing the receiver optical power, transmitter optical power and optical power launched into the fiber, we get the system's receiver sensitivity, the optimum transmitter power and optimum optical power injected into the fiber, which will be a reference for the actual systems' design.

  19. Purification, crystallization and initial crystallographic characterization of brazil-nut allergen Ber e 2

    SciTech Connect

    Guo, Feng; Jin, Tengchuan; Howard, Andrew; Zhang, Yu-Zhu

    2007-11-01

    The crystallization of the brazil nut allergen Ber e 2 is reported. Peanut and tree-nut allergies have attracted considerable attention because of their frequency and their lifelong persistence. Brazil-nut (Bertholletia excelsa) allergies have been well documented and the 11S legumin-like seed storage protein Ber e 2 (excelsin) is one of the two known brazil-nut allergens. In this study, Ber e 2 was extracted from brazil-nut kernels and purified to high purity by crystalline precipitation and gel-filtration chromatography. Well diffracting single crystals were obtained using the hanging-drop vapour-diffusion method. A molecular-replacement structural solution has been obtained. Refinement of the structure is currently under way.

  20. BER performance enhancement for secure wireless communication systems based on chaotic-MIMO techniques

    NASA Astrophysics Data System (ADS)

    Abdulameer, Lwaa F.; Jignesh, Jokhakar D.; Sripati, U.; Kulkarni, Murlidhar

    2013-01-01

    The growing interest in the use of chaotic techniques for enabling secure communication in recent years has been motivated by the emergence of a number of wireless services which require the service provider to provide low bit error rates (BER) along with information security. This paper investigates the feasibility of using chaotic communications over Multiple-Input-Multiple-Output (MIMO) channels. While the use of Chaotic maps can enhance security, it is seen that the overall BER performance gets degraded when compared to conventional communication schemes. In order to overcome this limitation, we have proposed the use of a combination of Chaotic modulation and Alamouti Space Time Block Code. The performance of Chaos Shift Keying (CSK) with 2×1 and 2×2 Alamouti schemes for different chaotic maps over wireless channels has been studied. It has been shown that the use of these schemes can provide security enhancement without the penalty of degradation of BER performance.

  1. BER of asymmetrical optical beams in oceanic and marine atmospheric media

    NASA Astrophysics Data System (ADS)

    Baykal, Yahya

    2017-06-01

    The average bit-error-rate (BER) performances of asymmetrical optical Gaussian beams propagating in oceanic and marine atmospheric turbulence are examined. Both type of media are assumed to exhibit weak turbulence. The effect of asymmetry factor on the BER performance are investigated in conjunction with the oceanic turbulence parameters of the ratio of temperature to salinity contributions to the refractive index spectrum, the rate of dissipation of mean-squared temperature and the rate of dissipation of kinetic energy per unit mass of fluid, and with the marine atmospheric link parameters of the link length and the structure constant. Also, the variations of the BER against the source size of various asymmetrical beams are scrutinized in both oceanic and marine atmospheric media.

  2. Assisted Dying in Canada.

    PubMed

    Schuklenk, Udo

    2014-01-01

    This paper makes an affirmative ethical case in favour of the decriminalization of assisted dying in Canada. It then proceeds to defending the affirmative case against various slippery-slope arguments that are typically deployed by opponents of assisted dying. Finally, a recent case of questionable professional conduct by anti-euthanasia campaigners cum academics is flagged as a warning to all of us not to permit the quality of the professional debate to deteriorate unacceptably, despite the personal emotional investments involved on all sides of the debate.

  3. Messsysteme für die Bildgebung mit Röntgenstrahlung

    NASA Astrophysics Data System (ADS)

    Krieger, Hanno

    Nach einem kurzen Überblick über die heute verwendeten Detektorsysteme zur Erzeugung von Röntgenbildern in der Projektionsradiografie folgt die ausführliche Darstellung der klassischen Kombination von Röntgenfilm und Verstärkungsfolien. Der nächste Abschnitt befasst sich mit den Ausführungen zu Bildverstärkern, den Speicherfolien und den anderen digitalen Festkörperdetektoren. Der Dosisbedarf eines bildgebenden Systems kann bei Film-Folien- Kombinationen durch die Angabe von Empfindlichkeitsklassen definiert werden, bei den digitalen Detektoren geschieht dies mit Hilfe der Dosisindikatoren (Exposure Indicator EI, Abweichungsindikator DI). Im zweiten großen Abschnitt dieses Kapitels werden die Grundlagen der Computertomografie erläutert. Dazu werden zunächst die CT-Gerätegenerationen und die CT-Detektoren besprochen. Nach einer Erläuterung der Rechenverfahren zur Bilderzeugung folgt die Definition der Hounsfield-Einheiten. Den Abschluss bildet eine ausführliche Darstellung der Bildartefakte bei der Computertomografie.

  4. Purification, crystallization and initial crystallographic characterization of brazil-nut allergen Ber e 2.

    PubMed

    Guo, Feng; Jin, Tengchuan; Howard, Andrew; Zhang, Yu Zhu

    2007-11-01

    Peanut and tree-nut allergies have attracted considerable attention because of their frequency and their lifelong persistence. Brazil-nut (Bertholletia excelsa) allergies have been well documented and the 11S legumin-like seed storage protein Ber e 2 (excelsin) is one of the two known brazil-nut allergens. In this study, Ber e 2 was extracted from brazil-nut kernels and purified to high purity by crystalline precipitation and gel-filtration chromatography. Well diffracting single crystals were obtained using the hanging-drop vapour-diffusion method. A molecular-replacement structural solution has been obtained. Refinement of the structure is currently under way.

  5. Revisiting regression in autism: Heller's dementia infantilis. Includes a translation of Über Dementia Infantilis.

    PubMed

    Westphal, Alexander; Schelinski, Stefanie; Volkmar, Fred; Pelphrey, Kevin

    2013-02-01

    Theodor Heller first described a severe regression of adaptive function in normally developing children, something he termed dementia infantilis, over one 100 years ago. Dementia infantilis is most closely related to the modern diagnosis, childhood disintegrative disorder. We translate Heller's paper, Über Dementia Infantilis, and discuss similarities in presentation between Heller's cases, and a group of children with childhood disintegrative disorder. In particular we discuss a prodromal period of affective dysregulation described by Heller, and also evident in our sample, but not previously described in any detail since the publication of Über Dementia Infantilis.

  6. When Somebody Dies

    MedlinePlus

    ... to have fun with. That absence leaves a big hole in our lives. Maybe you had a pet that died . Remember the first few times you walked into the house after your dog or cat was gone? It was strange not to have ...

  7. When a Baby Dies.

    ERIC Educational Resources Information Center

    Church, Martha Jo; And Others

    Written especially for grieving mothers whose babies have died, this booklet offers an overview of stages and experiences through which bereaved parents commonly pass. Specifically, the text is intended to give comfort to bereaved parents, offer insight into the grieving process, and provide thoughts on leave-taking ceremonies. The first section…

  8. Die Kosmologie der Griechen.

    NASA Astrophysics Data System (ADS)

    Mittelstraß, J.

    Contents: 1. Mythische Eier. 2. Thales-Welten. 3. "Alles ist voller Götter". 4. Griechische Astronomie. 5. "Rettung der Phänomene". 6. Aristotelische Kosmololgie. 7. Aristoteles-Welt und Platon-Welt. 8. Noch einmal: die Göttlichkeit der Welt. 9. Griechischer Idealismus.

  9. Poetry and the Dying.

    ERIC Educational Resources Information Center

    Kramer, Aaron

    1992-01-01

    Demonstrates roles poetry can play as people confront the death of loved ones and their own dying. Gives examples of Heinrich Heine transforming his agony into art and, from the poetry of two college students, both in advanced stages of neurological disease, which was read aloud in class, teaching all present something about how to approach their…

  10. When a Student Dies.

    ERIC Educational Resources Information Center

    Dowling-Sendor, Benjamin

    1998-01-01

    A student athlete died after the first day of football practice in Texas. His parents brought suit (Roventini v. Pasadena Independent School District) for monetary damages in federal district court contending that the defendants violated the student's rights. Presents the judge's analysis of the legal issues. Advises board members and…

  11. Dying to Play.

    ERIC Educational Resources Information Center

    Miller, John K.

    1998-01-01

    In August 1995, a young football player died as a result of heat exhaustion suffered on the first day of football practice in Arkansas. Spurred by this tragedy, the district made some changes that every school district with an athletic program should consider. These include using a heat-stress monitor; abandoning the practice of group physical…

  12. Dying in hospital.

    PubMed

    Pearce, Lynne

    2016-06-22

    While surveys consistently show that about two thirds of people want to die at home, more than half of all deaths happen in hospitals. And in their last days, many people are cared for by generalist nursing staff who may be reticent, or even afraid, to talk about what is happening.

  13. When Somebody Dies

    MedlinePlus

    ... container is gone, but what's inside — the water — remains. The part of a person that's left after the body dies is often called the "soul" or "spirit." Some people believe the soul is the part of a human that loves, feels, and creates; it's the part ...

  14. Behavioral and Emotional Strength-Based Assessment of Finnish Elementary Students: Psychometrics of the BERS-2

    ERIC Educational Resources Information Center

    Sointu, Erkko Tapio; Savolainen, Hannu; Lambert, Matthew C.; Lappalainen, Kristiina; Epstein, Michael H.

    2014-01-01

    When rating scales are used in different countries, thorough investigation of the psychometric properties is needed. We examined the internal structure of the Finnish translated Behavioral and Emotional Rating Scale-2 (BERS-2) using Rasch and confirmatory factor analysis approaches with a sample of youth, parents, and teachers. The results…

  15. Analytical estimation of laser phase noise induced BER floor in coherent receiver with digital signal processing.

    PubMed

    Vanin, Evgeny; Jacobsen, Gunnar

    2010-03-01

    The Bit-Error-Ratio (BER) floor caused by the laser phase noise in the optical fiber communication system with differential quadrature phase shift keying (DQPSK) and coherent detection followed by digital signal processing (DSP) is analytically evaluated. An in-phase and quadrature (I&Q) receiver with a carrier phase recovery using DSP is considered. The carrier phase recovery is based on a phase estimation of a finite sum (block) of the signal samples raised to the power of four and the phase unwrapping at transitions between blocks. It is demonstrated that errors generated at block transitions cause the dominating contribution to the system BER floor when the impact of the additive noise is negligibly small in comparison with the effect of the laser phase noise. Even the BER floor in the case when the phase unwrapping is omitted is analytically derived and applied to emphasize the crucial importance of this signal processing operation. The analytical results are verified by full Monte Carlo simulations. The BER for another type of DQPSK receiver operation, which is based on differential phase detection, is also obtained in the analytical form using the principle of conditional probability. The principle of conditional probability is justified in the case of differential phase detection due to statistical independency of the laser phase noise induced signal phase error and the additive noise contributions. Based on the achieved analytical results the laser linewidth tolerance is calculated for different system cases.

  16. Herausforderungen durch die deutsche Wiedervereinigung

    NASA Astrophysics Data System (ADS)

    Stäglin, Reiner

    Die Wiedervereinigung stellte auch die Statistik vor große Aufgaben. Die als Organ der staatlichen Planung staatsnah orientierte Statistik der DDR musste auf das zur Neutralität und wissenschaftlichen Unabhängigkeit verpflichtete System der Bundesrepublik umgestellt werden. Ebenso verlangten die Universitäten eine Neuorientierung. Die Deutsche Statistische Gesellschaft hat sich vor allem dreier Aufgaben mit großem Engagement, aber auch mit Bedachtsamkeit angenommen: Aufnahme und Integration der Statistiker aus den neuen Bundesländern in die Gesellschaft, Begleitung der Neuausrichtung des Faches Statistik an deren Hochschulen und Sicherung sowie Nutzung von Datenbeständen der ehemaligen DDR.

  17. Modeling the Mechanical Performance of Die Casting Dies

    SciTech Connect

    R. Allen Miller

    2004-02-27

    The following report covers work performed at Ohio State on modeling the mechanical performance of dies. The focus of the project was development and particularly verification of finite element techniques used to model and predict displacements and stresses in die casting dies. The work entails a major case study performed with and industrial partner on a production die and laboratory experiments performed at Ohio State.

  18. Die Quantenwelt - unbestimmt und nichtlokal?: Interpretation verschränkter Zustände

    NASA Astrophysics Data System (ADS)

    Fink, Helmut

    2004-07-01

    Das aufblühende Gebiet der Quanteninformationsverarbeitung belebt die alte Frage, wie das Phänomen der quantenphysikalischen Verschränktheit zu interpretieren sei. Besonders das berühmte Gedankenexperiment von Einstein, Podolsky und Rosen rückt wieder in das Zentrum der Aufmerksamkeit, seit Laborexperimente an verschränkten Quantensystemen durchgeführt werden, deren Teile räumlich weit von einander entfernt sind. Kann ein Teil eines solchen verschränkten Systems mit Überlichtgeschwindigkeit spüren, dass an einem weit entfernten anderen Teil gemessen wird? Hinter dieser Frage steckt die Vorstellung, es gebe einen nichtlokalen Mechanismus in der Natur. Diese Vorstellung erweist sich jedoch als keineswegs zwingend und sogar als irreführend, wenn man akzeptiert, dass die Werte von Beobachtungsgrößen in Quantenzuständen objektiv unbestimmt sind. Sie entstehen erst dort, wo wirklich gemessen wird.

  19. Die Deutsche Statistische Gesellschaft in der Weimarer Republik und während der Nazidiktatur

    NASA Astrophysics Data System (ADS)

    Wilke, Jürgen

    Nach anfänglichen Schwierigkeiten durch den 1. Weltkrieg erlangte die Deutsche Statistische Gesellschaft (DStatG) unter dem renommierten Statistiker und Vorsitzenden der DStatG, Friedrich Zahn, durch eine Vielzahl von Aktivitäten hohes Ansehen. Es gab Bestrebungen, Statistiker aus allen Arbeitsfeldern der Statistik in die DStatG zu integrieren, wobei die "Mathematische Statistik" nur zögerlich akzeptiert wurde (Konjunkturforschung, Zeitreihenanalyse). Nach der Machtübernahme 1933 durch Adolf Hitler geriet die DStatG in das Fahrwasser nationalsozialistischer Ideologie und Politik (Führerprinzip, Gleichschaltung des Vereinswesens). Damit war eine personelle Umstrukturierung in der DStatG verbunden. Politisch Missliebige und rassisch Verfolgte mussten die DStatG verlassen (Bernstein, Freudenberg, Gumbel u.a.). Unter den Statistikern gab es alle Abstufungen im Verhalten zum Regime von Ablehnung und zwangsweiser Anpassung über bereitwilliges Mitläufertum bis zu bewusster Täterschaft. Besonders die Bevölkerungsstatistik wurde durch die NS- Rassenpolitik auf lange Sicht diskreditiert. Im Rahmen von Wirtschaftsplanung und Aufrüstung wurden neue zukunftsträchtige statistische Modelle (Grünig, Bramstedt, Leisse) entwickelt.

  20. Heated die facilitates tungsten forming

    NASA Technical Reports Server (NTRS)

    Chattin, J. H.; Haystrick, J. E.; Laughlin, J. C.; Leidy, R. A.

    1966-01-01

    Tungsten forming in a press brake employs a bottom die assembly with a heating manifold between two water-cooled die sections. The manifold has hydrogen-oxygen burners spaced along its length for even heat during forming.

  1. 'We Have No Dying Patients'

    ERIC Educational Resources Information Center

    Robinson, Lisa

    1974-01-01

    A course on death and dying offered by the University of Maryland School of Nursing focuses on developing relationships between health care workers and dying people, using actual clients as the vehicle for learning. (Author/EA)

  2. Designing a Die for Hydroforming

    NASA Astrophysics Data System (ADS)

    Vasile, Radu

    2016-12-01

    Designing a die is in every application field an intensive process of bringing together know how from design, testing and every-day use from previous dies with the new application requirements. Contribution deals with a knowledge oriented, modular and feature integrated computer aided design system for die development. This paper describes the concepts behind designing a hydroforming die for sheet metal forming, with easy application-use in small workshops for testing hydroforming capabilities of different materials.

  3. Psychotherapy with Older Dying Persons.

    ERIC Educational Resources Information Center

    Dye, Carol J.

    Psychotherapy with older dying patients can lead to problems of countertransference for the clinician. Working with dying patients requires flexibility to adapt basic therapeutics to the institutional setting. Goals of psychotherapy must be reconceptualized for dying clients. The problems of countertransference arise because clinicians themselves…

  4. Dying with dignity.

    PubMed

    Madan, T N

    1992-08-01

    Death is a theme of central importance in all cultures, but the manner in which it is interpreted varies from society to society. Even so, traditional cultures, including Christian, Hindu and Jain religious traditions, exhibited a positive attitude to death and did not look upon it in a dualistic framework of good vs bad, or desirable vs undesirable. Nor was pessimism the dominant mood in their thinking about death itself. A fundamental paradigm shift occurred in the West in the eighteenth century when death was desacralized and transformed into a secular event amenable to human manipulation. From those early beginnings, dying and death have been thoroughly medicalized and brought under the purview of high technology in the twentieth century. Once death is seen as a problem for professional management, the hospital displaces the home, and specialists with different kinds and degrees of expertise take over from the family. Everyday speech and the religious idiom yield place to medical jargon. The subject (an ageing, sick or dying person) becomes the object of this make-believe yet real world. As the object of others' professional control, he or she loses the freedom of self-assessment, expression and choice. Or, he or she may be expected to choose when no longer able to do so. Thus, not only freedom but dignity also is lost, and lawyers join doctors in crisis manipulation and perpetuation. Although the modern medical culture has originated in the West, it has gradually spread to all parts of the world, subjugating other kinds of medical knowledge and other attitudes to dying and death.(ABSTRACT TRUNCATED AT 250 WORDS)

  5. Rep. George Brown dies

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    George E. Brown, ranking Democratic member of the U.S. House of Representatives Science Committee, died on July 15 at the age of 79 due to complications following a heart valve replacement last May. He was a strong advocate for science and environmental protection measures, and an independent thinker who sometimes found himself alone or far ahead of other people on issues. A congressman for 34 years who represented first the 29th Congressional District and then the 42nd District in California, Brown served on the science committee since 1965 and was chair from 1991 through 1994.

  6. N-methylpurine DNA glycosylase and DNA polymerase β modulate BER inhibitor potentiation of glioma cells to temozolomide

    PubMed Central

    Tang, Jiang-bo; Svilar, David; Trivedi, Ram N.; Wang, Xiao-hong; Goellner, Eva M.; Moore, Briana; Hamilton, Ronald L.; Banze, Lauren A.; Brown, Ashley R.; Sobol, Robert W.

    2011-01-01

    Temozolomide (TMZ) is the preferred chemotherapeutic agent in the treatment of glioma following surgical resection and/or radiation. Resistance to TMZ is attributed to efficient repair and/or tolerance of TMZ-induced DNA lesions. The majority of the TMZ-induced DNA base adducts are repaired by the base excision repair (BER) pathway and therefore modulation of this pathway can enhance drug sensitivity. N-methylpurine DNA glycosylase (MPG) initiates BER by removing TMZ-induced N3-methyladenine and N7-methylguanine base lesions, leaving abasic sites (AP sites) in DNA for further processing by BER. Using the human glioma cell lines LN428 and T98G, we report here that potentiation of TMZ via BER inhibition [methoxyamine (MX), the PARP inhibitors PJ34 and ABT-888 or depletion (knockdown) of PARG] is greatly enhanced by over-expression of the BER initiating enzyme MPG. We also show that methoxyamine-induced potentiation of TMZ in MPG expressing glioma cells is abrogated by elevated-expression of the rate-limiting BER enzyme DNA polymerase β (Polβ), suggesting that cells proficient for BER readily repair AP sites in the presence of MX. Further, depletion of Polβ increases PARP inhibitor-induced potentiation in the MPG over-expressing glioma cells, suggesting that expression of Polβ modulates the cytotoxic effect of combining increased repair initiation and BER inhibition. This study demonstrates that MPG overexpression, together with inhibition of BER, sensitizes glioma cells to the alkylating agent TMZ in a Polβ-dependent manner, suggesting that the expression level of both MPG and Polβ might be used to predict the effectiveness of MX and PARP-mediated potentiation of TMZ in cancer treatment. PMID:21377995

  7. Controlling particle size in the Stöber process and incorporation of calcium.

    PubMed

    Greasley, Sarah L; Page, Samuel J; Sirovica, Slobodan; Chen, Shu; Martin, Richard A; Riveiro, Antonio; Hanna, John V; Porter, Alexandra E; Jones, Julian R

    2016-05-01

    The Stӧber process is commonly used for synthesising spherical silica particles. This article reports the first comprehensive study of how the process variables can be used to obtain monodispersed particles of specific size. The modal particle size could be selected within in the range 20-500 nm. There is great therapeutic potential for bioactive glass nanoparticles, as they can be internalised within cells and perform sustained delivery of active ions. Biodegradable bioactive glass nanoparticles are also used in nanocomposites. Modification of the Stӧber process so that the particles can contain cations such as calcium, whilst maintaining monodispersity, is desirable. Here, whilst calcium incorporation is achieved, with a homogenous distribution, careful characterisation shows that much of the calcium is not incorporated. A maximum of 10 mol% CaO can be achieved and previous reports are likely to have overestimated the amount of calcium incorporated.

  8. Technische Systeme für den Herzersatz und die Herzunterstützung

    NASA Astrophysics Data System (ADS)

    Schöb, Reto; Loree, Howard M.

    Herzkrankheiten verursachen allein in den Vereinigten Staaten jährlich mehr als 700’000 Todesfälle. Ungefähr 3 Millionen Patienten in den U.S.A. leiden gemäss der American Heart Association (AHA) und dem National Heart, Lung and Blood Institute (NHLBI) an kongestivem Herzversagen (Congestive Heart Failure, CHF), welches eine chronische, sehr entkräftende und degenerative Krankheit ist: Das Herz ist dabei unfähig, hinreichend Blut zu den Organen des Körpers zu pumpen. Über 400’000 Fälle von CHF werden jedes Jahr diagnostiziert. Ähnliche Zahlen werden für Europa und Japan zusammen geschätzt. Basierend auf Daten vom AHA und NHLBI beträgt die fünfjährige Überlebensrate für CHF-Patienten lediglich etwa 50% [1]. 70’000-120’000 dieser Patienten könnten von einer Herzverpflanzung profitieren. 1999 wurden in den USA aber nur 2185 Herztransplantationen durchgeführt während die Warteliste über 4000 Patienten beträgt [2]. Ein akuter Mangel an Spenderherzen und die enormen Kosten (250’000-400’000 USD pro Patient) sind die begrenzenden Faktoren für Herztransplantationen [3]. Dies bedeutet, dass eine riesige Anzahl von Patienten durch ein zuverlässiges und verschleissfreies, nichtthrombotisches, total implantierbares, künstliches Herz gerettet werden könnten. Bis heute jedoch kein derartiges Implantat kommerziell verfügbar.

  9. Accurate defect die placement and nuisance defect reduction for reticle die-to-die inspections

    NASA Astrophysics Data System (ADS)

    Wen, Vincent; Huang, L. R.; Lin, C. J.; Tseng, Y. N.; Huang, W. H.; Tuo, Laurent C.; Wylie, Mark; Chen, Ellison; Wang, Elvik; Glasser, Joshua; Kelkar, Amrish; Wu, David

    2015-10-01

    Die-to-die reticle inspections are among the simplest and most sensitive reticle inspections because of the use of an identical-design neighboring-die for the reference image. However, this inspection mode can have two key disadvantages: (1) The location of the defect is indeterminate because it is unclear to the inspector whether the test or reference image is defective; and (2) nuisance and false defects from mask manufacturing noise and tool optical variation can limit the usable sensitivity. The use of a new sequencing approach for a die-to-die inspection can resolve these issues without any additional scan time, without sacrifice in sensitivity requirement, and with a manageable increase in computation load. In this paper we explore another approach for die-to-die inspections using a new method of defect processing and sequencing. Utilizing die-to-die double arbitration during defect detection has been proven through extensive testing to generate accurate placement of the defect in the correct die to ensure efficient defect disposition at the AIMS step. The use of this method maintained the required inspection sensitivity for mask quality as verified with programmed-defectmask qualification and then further validated with production masks comparing the current inspection approach to the new method. Furthermore, this approach can significantly reduce the total number of defects that need to be reviewed by essentially eliminating the nuisance and false defects that can result from a die-to-die inspection. This "double-win" will significantly reduce the effort in classifying a die-to-die inspection result and will lead to improved cycle times.

  10. Where people die.

    PubMed Central

    Katz, B P; Zdeb, M S; Therriault, G D

    1979-01-01

    Death certificates for 1977 filed with the New York State Department of Health were studied to determine where people died. Data were examined by the location and cause of death and by the age, sex, race, and marital status of the decedent. Comparisons were made with a similar study in which U.S. data were used for 1958 events. Approximately 60 percent of all the 1977 deaths in upstate New York occurred in hospitals; only 27 percent occurred outside an institution. The location of death varied by all the factors studied. Within all age categories, males had a higher percentage of hospital deaths. In those age categories in which nursing home deaths comprised a significant proportion of total deaths, females had a higher percentage of such deaths than males. Differences in the location of death according to its cause reflect the nature of the cause of death, for example, whether it was of sudden onset or the result of chronic disease. Most people do not consider in advance where they might die. The idea that age, sex, and marital status, as well as the more obvious cause, all play a part in the location may seem surprising. Yet all these factors were found to be associated withe location of deaths in upstate New York, and there is no reason to believe that this association does not hold true for the entire nation. More research, however, needs to be done based on more years and other geographic artal stutus may be instructive as to the present state of health resources. PMID:515338

  11. Graphite/Thermoplastic-Pultrusion Die

    NASA Technical Reports Server (NTRS)

    Wilson, Maywood L.; Frye, Mark W.; Johnson, Gary S.; Stanfield, Clarence E.

    1990-01-01

    Attachment to extruder produces thermoplastic-impregnated graphite tape. Consists of profile die, fiber/resin collimator, and crosshead die body. Die designed to be attached to commercially available extrusion machine capable of extruding high-performance thermoplastics. Simple attachment to commercial extruder enables developers of composites to begin experimenting with large numbers of proprietary resins, fibers, and hybrid composite structures. With device, almost any possible fiber/resin combination fabricated.

  12. Die Milchstraße.

    NASA Astrophysics Data System (ADS)

    Henbest, N.; Couper, H.

    This book is a German translation, by M. Röser, from the English original "The guide to the Galaxy", published in 1994 (see Abstr. 61.003.065). Contents: 1. Die Entdeckung unserer Galaxis. 2. Die Lokale Gruppe. 3. Die Geographie der Galaxis. 4. Der Perseus-Arm. 5. Der Orion-Arm. 6. Unsere lokale Nachbarschaft: ein typischer Winkel der Galaxis. 7. Der Sagittarius-Arm: innerhalb der Sonnenumlaufbahn. 8. Das Zentrum der Galaxis.

  13. Graphite/Thermoplastic-Pultrusion Die

    NASA Technical Reports Server (NTRS)

    Wilson, Maywood L.; Frye, Mark W.; Johnson, Gary S.; Stanfield, Clarence E.

    1990-01-01

    Attachment to extruder produces thermoplastic-impregnated graphite tape. Consists of profile die, fiber/resin collimator, and crosshead die body. Die designed to be attached to commercially available extrusion machine capable of extruding high-performance thermoplastics. Simple attachment to commercial extruder enables developers of composites to begin experimenting with large numbers of proprietary resins, fibers, and hybrid composite structures. With device, almost any possible fiber/resin combination fabricated.

  14. Maintaining Low Voiding Solder Die Attach for Power Die While Minimizing Die Tilt

    SciTech Connect

    Hamm, Randy; Peterson, Kenneth A.

    2015-10-01

    This paper addresses work to minimize voiding and die tilt in solder attachment of a large power die, measuring 9.0 mm X 6.5 mm X 0.1 mm (0.354” x 0.256” x 0.004”), to a heat spreader. As demands for larger high power die continue, minimizing voiding and die tilt is of interest for improved die functionality, yield, manufacturability, and reliability. High-power die generate considerable heat, which is important to dissipate effectively through control of voiding under high thermal load areas of the die while maintaining a consistent bondline (minimizing die tilt). Voiding was measured using acoustic imaging and die tilt was measured using two different optical measurement systems. 80Au-20Sn solder reflow was achieved using a batch vacuum solder system with optimized fixturing. Minimizing die tilt proved to be the more difficult of the two product requirements to meet. Process development variables included tooling, weight and solder preform thickness.

  15. The effect of pyramiding Phytophthora infestans resistance genes R Pi-mcd1 and R Pi-ber in potato.

    PubMed

    Tan, M Y Adillah; Hutten, Ronald C B; Visser, Richard G F; van Eck, Herman J

    2010-06-01

    Despite efforts to control late blight in potatoes by introducing R(pi)-genes from wild species into cultivated potato, there are still concerns regarding the durability and level of resistance. Pyramiding R(pi)-genes can be a solution to increase both durability and level of resistance. In this study, two resistance genes, R(Pi-mcd1) and R(Pi-ber), introgressed from the wild tuber-bearing potato species Solanum microdontum and S. berthaultii were combined in a diploid S. tuberosum population. Individual genotypes from this population were classified after four groups, carrying no R(pi)-gene, with only R (Pi-mcd1), with only R(Pi-ber), and a group with the pyramided R(Pi-mcd1) and R (Pi-ber) by means of tightly linked molecular markers. The levels of resistance between the groups were compared in a field experiment in 2007. The group with R(Pi-mcd1) showed a significant delay to reach 50% infection of the leaf area of 3 days. The group with R ( Pi-ber ) showed a delay of 3 weeks. The resistance level in the pyramid group suggested an additive effect of R (Pi-mcd1) with R(Pi-ber). This suggests that potato breeding can benefit from combining individual R(pi)-genes, irrespective of the weak effect of R(Pi-mcd1) or the strong effect of R(Pi-ber).

  16. Adapt or die?

    PubMed

    Visser, S S; Nel, A H

    1996-12-01

    The worldwide economic recession and the concomitant limited stock of finances have had an influence on the available money of every household and have also inhibited the improvement of socio-economic conditions and medicine. The Reconstruction and Development Programme (RDP) has the objective of improving the living conditions of the people with regard to housing, education, training and health care. The latter seems to be a major problem which has to be addressed with the emphasis on the preventive and promotional aspects of health care. A comprehensive health care system did not come into being property in the past because of the maldistribution of health care services, personnel and differences in culture and health care beliefs and values. The question that now arises, is how to render a quality health care service within the constraints of inadequate financing and resources. A comprehensive literature study has been done with reference to quality health care and financing followed by a survey of existing health services and finances. Recommendations are made about minimum requirements to be accepted if one were to adapt rather than die in terms of the provision of healthcare: the decentralization and rationalization of the administration of health care, the stress on and realization of effective and efficient primary health care, the acceptance of participative management in health providing organizations, the provision of financial management training for health care managers and the application of management accounting principles for the improvement of the efficiency and effectiveness of management.

  17. Dying and 'euthanasia'.

    PubMed

    Benatar, S R

    1992-07-01

    Medical progress, secularisation of life, growing acceptance of individual human rights (including the right to refuse medical treatment) and of shared decision-making in medicine have focused public attention on the ways in which life may, and perhaps even ought to, be allowed to end in our complex modern era. Intense and thoughtful bio-ethical debate over many years has 'unpacked' the many different understandings and interpretations of the word euthanasia. The consequent conceptual clarification together with recognition and acknowledgement of psychological implications has facilitated a growing rational consensus on openly accepting the withholding and withdrawing of treatment (under defined conditions) within the realm of sound medical practice. This is clearly distinct from assisted suicide and active euthanasia which are generally considered unacceptable perversions of medical practice. Given the ability to sustain life for prolonged periods, often in a permanent state of unconsciousness, the unrealistic expectations of some medical personnel and the lay public, the severe constraints on health care facilities in South Africa and the totally inadequate allocation of resources for highly effective medical treatments, it is appropriate to re-open public debate on the limits of 'striving officiously to keep alive' and on the distinction between 'allowing to die' and 'killing'. Concern that 'rational' arguments reflect moral decay rather than moral progress keeps the debate open and focuses attention on some 'slippery slope' consequences.

  18. I Could Have Died Laughing.

    ERIC Educational Resources Information Center

    Maher, Michael Forrest; Smith, Douglas

    1993-01-01

    Notes that caregivers of the dying would do well to consider the prescriptive power of humor when confronting the challenges of healthy care for the terminally ill. Addresses laughter as the best medicine not only for the dying person but also for family and principal caregivers. Includes examples of therapeutic use of humor with the terminally…

  19. Two Piece Compaction Die Design

    SciTech Connect

    Coffey, Ethan N

    2010-03-01

    Compaction dies used to create europium oxide and tantalum control plates were modeled using ANSYS 11.0. Two-piece designs were considered in order to make the dies easier to assemble than the five-piece dies that were previously used. The two areas of concern were the stresses at the interior corner of the die cavity and the distortion of the cavity wall due to the interference fit between the two pieces and the pressure exerted on the die during the compaction process. A successful die design would have stresses less than the yield stress of the material and a maximum wall distortion on the order of 0.0001 in. Design factors that were investigated include the inner corner radius, the value of the interference fit, the compaction force, the size of the cavity, and the outer radius and geometry of the outer ring. The results show that for the europium oxide die, a 0.01 in. diameter wire can be used to create the cavity, leading to a 0.0055 in. radius corner, if the radial interference fit is 0.003 in. For the tantalum die, the same wire can be used with a radial interference fit of 0.001 in. Also, for the europium oxide die with a 0.003 in. interference fit, it is possible to use a wire with a diameter of 0.006 in. for the wire burning process. Adding a 10% safety factor to the compaction force tends to lead to conservative estimates of the stresses but not for the wall distortion. However, when the 10% safety factor is removed, the wall distortion is not affected enough to discard the design. Finally, regarding the europium oxide die, when the cavity walls are increased by 0.002 in. per side or the outer ring is made to the same geometry as the tantalum die, all the stresses and wall distortions are within the desired range. Thus, the recommendation is to use a 0.006 in. diameter wire and a 0.003 in. interference fit for the europium oxide die and a 0.01 in. diameter wire and a 0.001 in. interference fit for the tantalum die. The dies can also be made to have the

  20. GFDM performance in terms of BER, PAPR and OOB and comparison to OFDM system

    SciTech Connect

    Antapurkar, Shwetal K. Pandey, Avinash; Gupta, K. K.

    2016-03-09

    Generalized frequency division multiplexing is a multicarrier modulation technique which can be foreseen as a potential alternative for upcoming wireless networks. GFDM attractive features include reduced out-of-band radiation(OOB) and low peak-to-average ratio(PAPR), which are the crucial shortcomings of OFDM used in present day wireless communication networks. This paper gives detailed description of GFDM system model and further studies and validates through simulations, the performance of GFDM in terms of OOB, PAPR and Bit Error Rate (BER) and compares the results obtained with OFDM system.

  1. Taxonomic revision of the Neotropical genus Caenopangonia Kröber, 1930 (Diptera: Tabanidae).

    PubMed

    Krolow, Tiago Kütter; Henriques, Augusto Loureiro; González, Christian R

    2016-08-24

    The Neotropical species of Caenopangonia Kröber are revised herein based on examination of external and internal morphology of type material and specimens from Argentina and Chile. Three currently valid species are recognized: Caenopangonia aspera (Philip, 1958), Caenopangonia brevirostris (Philippi, 1865), and Caenopangonia hirtipalpis (Bigot, 1892). Two new species are described, Caenopangonia cerdai n. sp. Krolow, Henriques & González (Chile, Chacabuco) and Caenopangonia coscaroni n. sp. Krolow, Henriques & González (Chile, Malleco). We provide diagnosis and/or descriptions, distribution records, illustrations and discussion for all species, as well a key for identification.

  2. Solution Structure, Copper Binding and Backbone Dynamics of Recombinant Ber e 1–The Major Allergen from Brazil Nut

    PubMed Central

    Rundqvist, Louise; Tengel, Tobias; Zdunek, Janusz; Björn, Erik; Schleucher, Jürgen; Alcocer, Marcos J. C.; Larsson, Göran

    2012-01-01

    Background The 2S albumin Ber e 1 is the major allergen in Brazil nuts. Previous findings indicated that the protein alone does not cause an allergenic response in mice, but the addition of components from a Brazil nut lipid fraction were required. Structural details of Ber e 1 may contribute to the understanding of the allergenic properties of the protein and its potential interaction partners. Methodology/Principal Findings The solution structure of recombinant Ber e 1 was solved using NMR spectroscopy and measurements of the protein back bone dynamics at a residue-specific level were extracted using 15N-spin relaxation. A hydrophobic cavity was identified in the structure of Ber e 1. Using the paramagnetic relaxation enhancement property of Cu2+ in conjunction with NMR, it was shown that Ber e 1 is able to specifically interact with the divalent copper ion and the binding site was modeled into the structure. The IgE binding region as well as the copper binding site show increased dynamics on both fast ps-ns timescale as well as slower µs-ms timescale. Conclusions/Significance The overall fold of Ber e 1 is similar to other 2S albumins, but the hydrophobic cavity resembles that of a homologous non-specific lipid transfer protein. Ber e 1 is the first 2S albumin shown to interact with Cu2+ ions. This Cu2+ binding has minimal effect on the electrostatic potential on the surface of the protein, but the charge distribution within the hydrophobic cavity is significantly altered. As the hydrophobic cavity is likely to be involved in a putative lipid interaction the Cu2+ can in turn affect the interaction that is essential to provoke an allergenic response. PMID:23056307

  3. Differential polarization of immune responses by plant 2S seed albumins, Ber e 1, and SFA8.

    PubMed

    Kean, Dorothy E; Goodridge, Helen S; McGuinness, Stephen; Harnett, Margaret M; Alcocer, Marcos J C; Harnett, William

    2006-08-01

    The plant 2S seed albumins Ber e 1 and SFA8, although structurally very similar, vary with respect to their allergenic properties. Whereas the former represents a major allergen, the latter appears to promote only weak allergenic responses. The aim of this investigation was to determine whether the allergenic properties of Ber e 1 and SFA8 reflected differential polarization of dendritic cell (DC) and Th cell responses. We thus investigated the effect of recombinant forms of both allergens on DC and Th cell responses as indicated by cell surface phenotype and cytokine production. Exposure of murine DCs to SFA8, but not Ber e 1, resulted in production of the cytokines IL-12 p40 and TNF-alpha by a mechanism independent of recognition by TLRs. Furthermore, depending on the mouse strain used, increased expression of MHC class II and costimulatory molecules such as CD40, CD80, and CD86 was associated with exposure to SFA8, but not Ber e 1. In coculture experiments using the DO11.10 transgenic T cell that recognizes OVA peptide, DCs exposed to both allergens induced T cells to produce IFN-gamma, but only Ber e 1 could induce significant production of IL-4 and IL-5. Likewise, analysis of transcription factors shows increased T-bet with respect to both allergens, but also GATA-3 with respect to Ber e 1. Overall, our data are consistent with the idea that the ability of Ber e 1, but not SFA8, to act as a potent allergen may reflect differences in their ability to induce IL-12 production.

  4. Dying: A universal human experience?

    PubMed

    Bregman, L

    1989-03-01

    This paper explores the question, "Is there a universal psychological experience suffered by all dying persons?" a question to which the popular theory of Kübler-Ross presupposes an affirmative answer. Our answer takes three steps: first, a comparison between the Kübler-Ross model of dying and that of the late medievalBook of the Craft of Dying centered upon the five Kübler-Ross "stages"; second, a philosophical critique of the terms of this comparison; and third, a revised look at the alleged similarities between the two models, providing a deeper look at the moral and spiritual assumptions behind each.

  5. Average BER performance of FSO SIM-QAM systems in the presence of atmospheric turbulence and pointing errors

    NASA Astrophysics Data System (ADS)

    Djordjevic, Goran T.; Petkovic, Milica I.

    2016-04-01

    This paper presents the exact average bit error rate (BER) analysis of the free-space optical system employing subcarrier intensity modulation (SIM) with Gray-coded quadrature amplitude modulation (QAM). The intensity fluctuations of the received optical signal are caused by the path loss, atmospheric turbulence and pointing errors. The exact closed-form analytical expressions for the average BER are derived assuming the SIM-QAM with arbitrary constellation size in the presence of the Gamma-Gamma scintillation. The simple approximate average BER expressions are also provided, considering only the dominant term in the finite summations of obtained expressions. Derived expressions are reduced to the special case when optical signal transmission is affected only by the atmospheric turbulence. Numerical results are presented in order to illustrate usefulness of the derived expressions and also to give insights into the effects of different modulation, channel and receiver parameters on the average BER performance. The results show that the misalignment between the transmitter laser and receiver detector has the strong effect on the average BER value, especially in the range of the high values of the average electrical signal-to-noise ratio.

  6. Die Sonne, Stern unserer Erde

    NASA Astrophysics Data System (ADS)

    Lang, Kenneth R.; Ehlers, A.

    Dieses reich bebilderte Buch gibt eine Einführung in die Physik der Sonne und ihre Bedeutung für die Erde. Gestützt auf neueste Forschungsergebnisse aus Radioteleskop- und Satellitenbeobachtungen beschreibt der Autor die gewaltigen atomenergetischen Prozesse der Sonne, ihren geheimnisvollen Neutrinofluß, ihre seismischen Aktivitäten, Magnetfelder und Sonnenflecke, Korona, Sonnenausbrüche und Protuberanzen, den Sonnenwind, und die außerordentlich wichtige und vielfältige Bedeutung des Sonnenlichts, das Leben auf der Erde entstehen läßt und es auch gefährdet. Gut verständlich und in ansprechender Sprache geschrieben ist es ein wunderbares Buch für den Leser populärwissenschaftlicher Literatur, ein wertvolles Geschenk für Studenten der Astronomie und verwandter Disziplinen sowie Amateurastronomen.

  7. REFRACTORY DIE FOR EXTRUDING URANIUM

    DOEpatents

    Creutz, E.C.

    1959-08-11

    A die is presented for the extrusion of metals, said die being formed of a refractory complex oxide having the composition M/sub n/O/sub m/R/sub x/O/sub y/ where M is magnesium, zinc, manganese, or iron, R is aluminum, chromic chromium, ferric iron, or manganic manganese, and m, n, x, and y are whole numbers. Specific examples are spinel, magnesium aluminate, magnetite, magnesioferrite, chromite, and franklinite.

  8. Heat treatment of forging dies

    NASA Astrophysics Data System (ADS)

    Dovnar, S. A.; Kadnikov, S. A.

    1987-08-01

    In forging-die production there is a considerable range of forging dies which are promising for a changeover into advanced heat treatment involving bulk temper hardening and surface hardening using induction heating. The heat treatment suggested provides a saving of material resources as a result of improving the life of forging dies by a factor of 1.5-3 depending on the grade of die steel. As a result of induction hardening of forging dies, after temper hardening close to the boundary of the hardened layer a zone of reduced hardness forms whose unfavorable effect may be reduced by using before induction surface hardening bulk warming in a furnace or deep induction heating with a reduced energy concentration in the heating zone to the tempering temperature in the temper hardening cycle. In order to improve the uniformity of induction surface hardening for dies with a complex working shape it is desirable to use heating at reduced power with an increase in heating time.

  9. Investigation of the EDFA effect on the BER performance in space uplink optical communication under the atmospheric turbulence.

    PubMed

    Li, Mi; Jiao, Wenxiang; Song, Yuejiang; Zhang, Xuping; Dong, Shandong; Poo, Yin

    2014-10-20

    In a ground-to-satellite communication system with a preset EDFA, the EDFA's performance will be affected by space environment. With 250 Gy radiation, the EDFA's gain decreases by 2 dB from 19.97 dB at 20 °C. The BER increases by 2.5 orders of magnitude from 10(-10), and increases more with more radiation. The situation aggravates when the temperature rises by 73 °C. The laser's divergence-angle and transmitter radius have optimal values to make the lowest BER and increasing receiver diameter makes lower BERs, so setting these parameters with appropriate values will compensate the degradation caused by EDFA.

  10. When DNA repair goes wrong: BER-generated DNA-protein crosslinks to oxidative lesions.

    PubMed

    Quiñones, Jason Luis; Demple, Bruce

    2016-08-01

    Free radicals generate an array of DNA lesions affecting all parts of the molecule. The damage to deoxyribose receives less attention than base damage, even though the former accounts for ∼20% of the total. Oxidative deoxyribose fragments (e.g., 3'-phosphoglycolate esters) are removed by the Ape1 AP endonuclease and other enzymes in mammalian cells to enable DNA repair synthesis. Oxidized abasic sites are initially incised by Ape1, thus recruiting these lesions into base excision repair (BER) pathways. Lesions such as 2-deoxypentos-4-ulose can be removed by conventional (single-nucleotide) BER, which proceeds through a covalent Schiff base intermediate with DNA polymerase β (Polβ) that is resolved by hydrolysis. In contrast, the lesion 2-deoxyribonolactone (dL) must be processed by multinucleotide ("long-patch") BER: attempted repair via the single-nucleotide pathway leads to a dead-end, covalent complex with Polβ cross- linked to the DNA by an amide bond. We recently detected these stable DNA-protein crosslinks (DPC) between Polβ and dL in intact cells. The features of the DPC formation in vivo are exactly in keeping with the mechanistic properties seen in vitro: Polβ-DPC are formed by oxidative agents in line with their ability to form the dL lesion; they are not formed by non-oxidative agents; DPC formation absolutely requires the active-site lysine-72 that attacks the 5'-deoxyribose; and DPC formation depends on Ape1 to incise the dL lesion first. The Polβ-DPC are rapidly processed in vivo, the signal disappearing with a half-life of 15-30min in both mouse and human cells. This removal is blocked by inhibiting the proteasome, which leads to the accumulation of ubiquitin associated with the Polβ-DPC. While other proteins (e.g., topoisomerases) also form DPC under these conditions, 60-70% of the trapped ubiquitin depends on Polβ. The mechanism of ubiquitin targeting to Polβ-DPC, the subsequent processing of the expected 5'-peptidyl-dL, and the

  11. Use of RSP Tooling to Manufacture Die Casting Dies

    SciTech Connect

    Kevin McHugh

    2004-07-01

    The technology and art used to construct die casting dies has seen many improvements over the years. However, the time lag from when a design is finalized to the time a tool is in production has remained essentially the same. The two main causes for the bottleneck are the need to qualify a part design by making prototypes (usually from an alternative process), and the production tooling lead time after the prototypes are approved. Production tooling costs are high due to the labor and equipment costs associated with transforming a forged block of tool steel into a finished tool. CNC machining, sink EDM, benching, engraving and heat treatment unit operations are typically involved. As a result, there is increasing interest in rapid tooling (RT) technologies that shorten the design-to-part cycle and reduce the cost of dies. There are currently more than 20 RT methods being developed and refined around the world (1). The "rapid" in rapid tooling suggests time compression for tool delivery, but does not address robustness as nearly all RT approaches are intended for low-volume prototype work, primarily for molding plastics. Few options exist for die casting. An RT technology suitable for production-quality tooling in the time it normally takes for prototype tooling is highly desirable. In fact, there would be no need for a distinction between prototype and production tooling. True prototype parts could be made using the same processing conditions and materials intended for production. Qualification of the prototype part would allow the manufacturer to go directly into production with the same tool. A relatively new RT technology, Rapid Solidification Process (RSP) Tooling, is capable of making production-quality tooling in an RT timeframe for die casting applications. RSP Tooling, was developed at the Idaho National Engineering and Environmental Laboratory (INEEL), and commercialized with the formation of RSP Tooling, LLC (2). This paper describes the process, and

  12. Six new species of Philiris Röber, 1891 (Lepidoptera, Lycaenidae) from Papua New Guinea

    PubMed Central

    Müller, Chris J.

    2014-01-01

    Abstract Six new species of the large lycaenid genus Philiris Röber, 1891 (Philiris petriei sp. n., Philiris bubalisatina sp. n., Philiris baiteta sp. n., Philiris radicala sp. n., Philiris hindenburgensis sp. n. and Philiris parsonsi sp. n.), from Papua New Guinea, are described and illustrated, as are the early stages of the former taxon, with Litsea sp. near callophyllantha K. Schum (Lauraceae) recorded as the larval food plant. The holotypes of all but the latter are deposited in the ANIC, with that of P. parsonsi located in the BMNH. The external facies and male genitalia of all new species are compared in detail to putative known related species, and the types of these, in nearly all cases, are also illustrated. PMID:24715788

  13. Acting to let someone die.

    PubMed

    McGee, Andrew

    2015-02-01

    This paper examines the recent prominent view in medical ethics that withdrawing life-sustaining treatment (LST) is an act of killing. I trace this view to the rejection of the traditional claim that withdrawing LST is an omission rather than an act. Although that traditional claim is not as problematic as this recent prominent view suggests, my main claim is that even if we accepted that withdrawing LST should be classified as an act rather than as an omission, it could still be classified as letting die rather than killing. Even though omissions are contrasted with acts, letting die need not be, for one can let die by means of acts. The remainder of the paper is devoted to establishing this claim and addresses certain objections to it. © 2013 John Wiley & Sons Ltd.

  14. Clinical management of dying patients.

    PubMed Central

    Gavrin, J; Chapman, C R

    1995-01-01

    Dying is universal, and death should be a peaceful time. Myriad comfort measures are available in the last weeks before life ends. Discussions about end-of-life issues often suffer from lack of informed opinion. Palliative care experts have identified specific somatic and psychological sources of distress for dying patients and their loved ones. Pain, shortness of breath, nausea and vomiting, and fear of abandonment contribute substantially to both physical and psychological discomfort toward the end of life. Simple, effective methods exist for relieving those symptoms. Knowledge about the natural events associated with dying and an informed approach to medical and psychological interventions contribute to systematic and successful comfort care. We describe the origin of physical and psychological distress at the end of life and provide strategies for alleviating many of the discomforts. PMID:7571591

  15. Portable punch and die jig

    DOEpatents

    Lewandowski, Edward F.; Anderson, Petrus A.

    1978-01-01

    A portable punch and die jig includes a U-shaped jig of predetermined width having a slot of predetermined width in the base thereof extending completely across the width of the jig adapted to fit over the walls of rectangular tubes and a punch and die assembly disposed in a hole extending through the base of the jig communicating with the slot in the base of the jig for punching a hole in the walls of the rectangular tubes at precisely determined locations.

  16. [Dying with cancer: Hollywood lessons].

    PubMed

    Niemeyer, Fernanda; Kruse, Maria Henriqueta Luce

    2013-12-01

    The study attempts to understand how dying from cancer is portrayed by five movies produced in Hollywood between 1993 and 2006. Based on the cultural studies and their post-structuralism version and supported by the notions of discourse and subjectivity, as proposed by philosopher Michel Foucault, we suggest one of the possible readings of the movie picture corpus. We assess how the movie picture discourse acts as a cultural pedagogy that produces ways of seeing dying with cancer: immortalizing the healthy body image, silencing death, taking care of the dead body and, finally, accepting death. Our proposal is intended to stimulate reflections that may contribute to care and education in nursing.

  17. Die Herz-Lungen-Maschine

    NASA Astrophysics Data System (ADS)

    Krane, Markus; Bauernschmitt, Robert; Lange, Rüdiger

    Das Kapitel der modernen Herzchirurgie mit Einsatz der Herz-Lungen-Maschine am Menschen beginnt am 6. Mai 1953, als J. Gibbon bei einer 18-jährigen Patientin einen angeborenen Defekt in der Vorhofscheidewand verschließt [1]. Mit ersten experimentellen Versuchen zur extrakorporalen Zirkulation begann Gibbon bereits in den 30er Jahren des 20. Jahrhunderts. Die Grundlage für die heute gebräuchliche Rollerpumpe schufen Porter und Bradley mit ihrer "rotary pump“, welche sie 1855 zum Patent anmeldeten. Diese Pumpe wurde von DeBakey und Schmidt modifiziert und entspricht im Wesentlichen noch der heute sich im Routinebetrieb befindlichen Rollerpumpe [2].

  18. Convergent Validity with the BERS-2 Teacher Rating Scale and the Achenbach Teacher's Report Form: A Replication and Extension

    ERIC Educational Resources Information Center

    Benner, Gregory J.; Beaudoin, Kathleen; Mooney, Paul; Uhing, Brad M.; Pierce, Corey D.

    2008-01-01

    In the present study, we sought to extend instrument validation research for a strength-based emotional and behavior rating scale, the "Teacher Rating Scale of the Behavior and Emotional Rating Scale-Second Edition" (BERS-2; Epstein, M. H. (2004). "Behavioral and emotional rating scale" (2nd ed.). Austin, TX: PRO-ED) through…

  19. Characterization and mapping of RPi-ber, a novel potato late blight resistance gene from Solanum berthaultii.

    PubMed

    Rauscher, G M; Smart, C D; Simko, I; Bonierbale, M; Mayton, H; Greenland, A; Fry, W E

    2006-02-01

    Phytophthora infestans, the causal agent of late blight, threatens potato production worldwide. An important tool in the management of the disease is the use of resistant varieties. Eleven major resistance genes have been identified and introgressed from Solanum demissum. However, new sources of resistance are continually sought. Here, we report the characterization and refined genetic localization of a resistance gene previously identified as Rber in a backcross progeny of Solanum tuberosum and Solanum berthaultii. In order to further characterize Rber, we developed a set of P. infestans isolates capable of identifying each of the 11 R-genes known to confer resistance to late blight in potato. Our results indicate that Rber is a new resistance gene, different from those recognized in S. demissum, and therefore, it has been named RPi-ber according to the current system of nomenclature. In order to add new molecular markers around RPi-ber, we used a PCR-based mapping technique, named MASP-map, which located RPi-ber in a 3.9 cM interval between markers CT240 and TG63 on potato chromosome X. The location of RPi-ber coincides with an area involved in resistance to different pathogens of potato and tomato.

  20. Demonstration of Record BER and Number of Users for Optical CDMA (O-CDMA), with Implications to Secure Communications

    SciTech Connect

    Mendez, A J; Hernandez, V J; Bennett, C V; Gagliardi, R M; Lennon, W J

    2005-02-25

    We demonstrate a BER of 10{sup -11} for 16 simultaneous users, using wavelength/time O-CDMA. We show the extent to which severe multi-access interference can be used to mask and/or degrade the signal from an intruder.

  1. Analytical BER performance in differential n-PSK coherent transmission system influenced by equalization enhanced phase noise

    NASA Astrophysics Data System (ADS)

    Xu, Tianhua; Jacobsen, Gunnar; Popov, Sergei; Li, Jie; Sergeyev, Sergey; Friberg, Ari T.; Zhang, Yimo

    2015-01-01

    Long-haul high speed optical transmission systems are significantly distorted by the interplay between the electronic chromatic dispersion (CD) equalization and the local oscillator (LO) laser phase noise, which leads to an effect of equalization enhanced phase noise (EEPN). The EEPN degrades the performance of optical communication systems severely with the increment of fiber dispersion, LO laser linewidth, symbol rate, and modulation format. In this paper, we present an analytical model for evaluating the performance of bit-error-rate (BER) versus signal-to-noise ratio (SNR) in the n-level phase shift keying (n-PSK) coherent transmission system employing differential carrier phase estimation (CPE), where the influence of EEPN is considered. Theoretical results based on this model have been investigated for the differential quadrature phase shift keying (DQPSK), the differential 8-PSK (D8PSK), and the differential 16-PSK (D16PSK) coherent transmission systems. The influence of EEPN on the BER performance in term of the fiber dispersion, the LO phase noise, the symbol rate, and the modulation format are analyzed in detail. The BER behaviors based on this analytical model achieve a good agreement with previously reported BER floors influenced by EEPN. Further simulations have also been carried out in the differential CPE considering EEPN. The results indicate that this analytical model can give an accurate prediction for the DQPSK system, and a leading-order approximation for the D8PSK and the D16PSK systems.

  2. Abundance of BER-related proteins depends on cell proliferation status and the presence of DNA polymerase β

    PubMed Central

    Yamamoto, Mizuki; Yamamoto, Ryohei; Takenaka, Shigeo; Matsuyama, Satoshi; Kubo, Kihei

    2015-01-01

    In mammalian cells, murine N-methylpurine DNA glycosylase (MPG) removes bases damaged spontaneously or by chemical agents through the process called base excision repair (BER). In this study, we investigated the influence of POL β deficiency on MPG-initiated BER efficiency and the expression levels of BER-related proteins in log-phase and growth-arrested (G0) mouse embryonic fibroblasts (MEFs). G0 wild-type (WT) or POL β–deficient (Pol β–KO) cells showed greater resistance to methyl methanesulfonate than did log-phase cells, and repair of methylated bases was less efficient in the G0 cells. Apex1 mRNA expression was significantly lower in Pol β–KO or G0 WT MEFs than in log-phase WT MEFs. Moreover, although Mpg mRNA levels did not differ significantly among cell types, MPG protein levels were significantly higher in log-phase WT cells than in log-phase Pol β–KO cells or either type of G0 cells. Additionally, proliferating cell nuclear antigen protein levels were also reduced in log-phase Pol β–KO cells or either type of G0 cells. These results indicated that MPG-initiated BER functions mainly in proliferating cells, but less so in G0 cells, and that POL β may be involved in regulation of the amount of intracellular repair proteins. PMID:25829532

  3. Diagnostic accuracy of Ber-EP4 for metastatic adenocarcinoma in serous effusions: a meta-analysis.

    PubMed

    Wang, Bo; Li, Diandian; Ou, Xuemei; Yi, Qun; Feng, Yulin

    2014-01-01

    Numerous studies have investigated the utility of Ber-EP4 in differentiating metastatic adenocarcinoma (MAC) from malignant epithelial mesothelioma (MM) and/or reactive mesothelial cells (RM) in serous effusions. However, the results remain controversial. The aim of this study is to determine the overall accuracy of Ber-EP4 in serous effusions for MAC through a meta-analysis of published studies. Publications addressing the accuracy of Ber-EP4 in the diagnosis of MAC were selected from the Pubmed, Embase and Cochrane Library. Data from selected studies were pooled to yield summary sensitivity, specificity, positive and negative likelihood ratio (LR), diagnostic odds ratio (DOR), and receiver operating characteristic (SROC) curve. Statistical analysis was performed by Meta-Disc 1.4 and STATA 12.0 softwares. 29 studies, based on 2646 patients, met the inclusion criteria and the summary estimating for Ber-EP4 in the diagnosis of MAC were: sensitivity 0.8 (95% CI: 0.78-0.82), specificity 0.94 (95% CI: 0.93-0.96), positive likelihood ratio (PLR) 12.72 (95% CI: 8.66-18.7), negative likelihood ratio (NLR) 0.18 (95% CI: 0.12-0.26) and diagnostic odds ratio 95.05 (95% CI: 57.26-157.77). The SROC curve indicated that the maximum joint sensitivity and specificity (Q-value) was 0.91; the area under the curve was 0.96. Our findings suggest that BER-EP4 may be a useful diagnostic adjunctive tool for confirming MAC in serous effusions.

  4. Robert Merton Dies at 92

    ERIC Educational Resources Information Center

    Snell, Joel C.

    2006-01-01

    This article features Robert Merton, who died recently at age 92. Merton came into this world as a Jewish baby named Meyer Schkolnick. He lived in South Philly where his parents wrenched a living as blue-collar workers. Merton chose an Anglicized name to move into the Yankee dominated America of the 20's and 30's. At Harvard, he studied under…

  5. Robert Merton Dies at 92

    ERIC Educational Resources Information Center

    Snell, Joel C.

    2006-01-01

    This article features Robert Merton, who died recently at age 92. Merton came into this world as a Jewish baby named Meyer Schkolnick. He lived in South Philly where his parents wrenched a living as blue-collar workers. Merton chose an Anglicized name to move into the Yankee dominated America of the 20's and 30's. At Harvard, he studied under…

  6. Attitudes on Death and Dying.

    ERIC Educational Resources Information Center

    Andrus, Charles E.

    This paper explored attitudes toward death and dying revealed through interviews with members of the clergy, the medical profession, funeral directors, nursing home residents, and selected others. The sampling was small and results are not intended to be representative of the groups to which these people belong. Rather, the study may be used as a…

  7. Attitudes on Death and Dying.

    ERIC Educational Resources Information Center

    Andrus, Charles E.

    This paper explored attitudes toward death and dying revealed through interviews with members of the clergy, the medical profession, funeral directors, nursing home residents, and selected others. The sampling was small and results are not intended to be representative of the groups to which these people belong. Rather, the study may be used as a…

  8. The thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The effects of welding, five selected surface coatings, and stress relieving on the thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies were studied using eleven thermal fatigue specimens. Stress relieving was conducted after each 5,000 cycle interval at 1050 F for three hours. Four thermal fatigue specimens were welded with H-13 or maraging steel welding rods at ambient and elevated temperatures and subsequently, subjected to different post-weld heat treatments. Crack patterns were examined at 5,000, 10,000, and 15,000 cycles. The thermal fatigue resistance is expressed by two crack parameters which are the average maximum crack and the average cracked area. The results indicate that a significant improvement in thermal fatigue resistance over the control was obtained from the stress-relieving treatment. Small improvements were obtained from the H-13 welded specimens and from a salt bath nitrogen and carbon-surface treatment. The other surface treatments and welded specimens either did not affect or had a detrimental influence on the thermal fatigue properties of the H-13 die steel.

  9. A micro-mechanical evaluation of the effects of die hardener on die stone.

    PubMed

    He, Li-Hong; van Vuuren, Ludwig Jansen; Planitz, Nina; Swain, Michael V

    2010-08-01

    The purpose of this study was to investigate the properties of a die hardener penetrated layer and evaluate its protective effects on the surface of die stone. A commercial die hardener (PDQ die hardener, Whipmix corp., USA) was tested on a die stone (GC Fujirock EP die stone, GC Europe, Belgium) and a dental plaster (Dental Stone, United States Gypsum Company, USA). Nanoindentation and micro-scratch tests were performed on both coated and uncoated specimens. The scratch damage was observed by SEM and the penetration depth of die hardener was detected by the affiliated EDX. Upon drying, the die hardener penetrated into the die stone to a depth of 3-5 microm, and deposited a thin film on the surface of die stone. Although the die hardener penetrated layer did not show improved mechanical properties, the die hardener film on the surface did protect the specimens from abrasion damage.

  10. Exploratory study on H13 steel dies

    SciTech Connect

    Sunwoo, A.J.

    1994-04-01

    Ultrahigh-strength H13 steel is a recommended die material for aluminum die casting; dies made from H13 steel can be safely water- cooled during hot working operations without cracking. However, after time the dies exhibited surface cracking and excessive wear. Erosive wear also occurs owing to high pressure injection of molten Al. An exploratory study was made of the causes for surface cracking of H13 dies. Results suggest that surface cracking is caused by interrelated factors, internal to the die material as well as externally induced conditions.

  11. Bifurkationsanalyse eines LC Tank VCOs unter Berücksichtigung der variablen Kapazität

    NASA Astrophysics Data System (ADS)

    Bremer, J.-K.; Zorn, C.; Mathis, W.

    2009-05-01

    In dieser Arbeit präsentieren wir einen neuartigen Ansatz für den systematischen Entwurf von integrierten LC Tank VCO-Schaltungen basierend auf dem Andronov Hopf Theorem und der Störungstheorie. Der Ansatz ermöglicht es, eine Abschätzung des resultierenden Abstimmbereichs, eine Stabilitätsanalyse und eine Berechnung der Amplitude des VCOs im Vorfeld des eigentlichen Entwurfs durchzuführen. Des Weiteren erlaubt die vorgestellte Methode eine Optimierung des VCOs hinsichtlich der in den Spezifikationen geforderte Amplitude und eine Minimierung der höheren Harmonischen. Mit Hilfe eines ladungsbasierten MOS-Modells ist es möglich die spannungsabhängige Kapazität der Varaktortransistoren durch einen analytischen Ausdruck zu beschreiben. Auf Basis dieses analytischen Ausdrucks wird die amplitudenabhängige Großsignalkapazität des VCOs in Abhängigkeit von Designparametern und der Tuningspannung modelliert. Die Gültigkeit der vorgestellte Entwurfsmethode wird anhand eines Beispielentwurfes eines 2.4 GHz VCO unter Verwendung einer 0.25 μm HF-CMOS Technologie verifiziert.

  12. Integrated Forming Simulations and Die Structural Analysis for Optimal Die Designs

    NASA Astrophysics Data System (ADS)

    Aitharaju, Venkat; Liu, Malcolm; Dong, Jennifer; Zhang, Jimmy; Wang, Chuan-tao

    2005-08-01

    After gaining a huge success in applying stamping simulations and formability analysis to validate die face developments, GM moves forward to winning total manufacturability in stamping process. Of which, ensuring die structure integrity and minimizing weight is one of the important initiatives. Stamping die design (or solid modeling of stamping dies) was traditionally conducted by following the die design manuals and standards. For any design changes beyond the standards, however, there are no math-based tools available to die designers to verify the outcome of the changes. Die structural analysis (DSA) provides a math-tool to validate the design changes and quantify the safety factors. Several years ago, GM Manufacturing Engineering — Die Center started die structural analysis to meet the increasing demands of customer needs in various areas: (1) to validate design changes; (2) to identify root cause of die breakage during the tryout and stamping operations and propose repair schemes; (3) to optimize the die design for weight reduction; (4) to improve press throughput via optimizing the scrap chute openings, and (5) to provide a math-based tool to validate revisions to the current die design standards. In the integrated forming and die structural analysis, after successful line die surface developments, the forming loads (binder force, pad force, and forming tonnages) are extracted from forming simulations and applied to solid die members for structural analyses of stress, strains, and deflections. In the past few years, Die Center conducted static, dynamic and fatigue analysis for many dies that covers the die design changes requested by die design, die construction and stamping plants. This paper presents some fundamentals and issues of integrated forming and die structural analysis and illustrates the significant impact of die structural analysis on die design, die construction and production stamping.

  13. Should assisted dying be legalised?

    PubMed

    Frost, Thomas D G; Sinha, Devan; Gilbert, Barnabas J

    2014-01-15

    When an individual facing intractable pain is given an estimate of a few months to live, does hastening death become a viable and legitimate alternative for willing patients? Has the time come for physicians to do away with the traditional notion of healthcare as maintaining or improving physical and mental health, and instead accept their own limitations by facilitating death when requested? The Universities of Oxford and Cambridge held the 2013 Varsity Medical Debate on the motion "This House Would Legalise Assisted Dying". This article summarises the key arguments developed over the course of the debate. We will explore how assisted dying can affect both the patient and doctor; the nature of consent and limits of autonomy; the effects on society; the viability of a proposed model; and, perhaps most importantly, the potential need for the practice within our current medico-legal framework.

  14. Schlüsselkomponenten für Roboter in der Produktion Roboterhaut und Sicherheitskonzept für die Mensch-Roboter Kooperation

    NASA Astrophysics Data System (ADS)

    Denkena, B.; Hesse, P.; Friederichs, J.; Wedler, A.

    Vorgestellt wird der Aufbau einer aktiven Sensor-Matrix zur Abstands- und Kontaktdetektion in der Robotik. Diese besteht aus einem Sensornetzwerk zur Fusion und Überlagerung differenter physikalischer Wirkprinzipien. Die Sicherheit der I2C-Bus Kommunikation, der Aufbau der Roboterhaut, Ergebnisse der Abstandsdetektion mit Infrarot-, und Ultraschallsensorik werden dargestellt. Ferner wurden Temperatur-, und Beschleunigungssensoren auf die Oberfläche der Roboterhaut aufgebracht um Informationen über die Umgebung sicher an ein übergeordnetes Leitsystem zu übertragen. Eine unterlagerte sichere Roboterhaut mit Kontaktdetektion zeigt als einfache Schlüsselkomponente ein analoges Ausschaltverhalten für geringe Latenzzeiten. Als Schluss wird auf den Einsatz an einem Industrieroboter in der Produktion ohne trennende Schutzeinrichtungen (OTS) eingegangen.

  15. Emerging techniques for submicrometer particle sizing applied to Stöber silica.

    PubMed

    Bell, Nia C; Minelli, Caterina; Tompkins, Jordan; Stevens, Molly M; Shard, Alexander G

    2012-07-24

    The accurate characterization of submicrometer and nanometer sized particles presents a major challenge in the diverse applications envisaged for them including cosmetics, biosensors, renewable energy, and electronics. Size is one of the principal parameters for classifying particles and understanding their behavior, with other particle characteristics usually only quantifiable when size is accounted for. We present a comparative study of emerging and established techniques to size submicrometer particles, evaluating their sizing precision and relative resolution, and demonstrating the variety of physical principles upon which they are based, with the aim of developing a framework in which they can be compared. We used in-house synthesized Stöber silica particles between 100 and 400 nm in diameter as reference materials for this study. The emerging techniques of scanning ion occlusion sensing (SIOS), differential centrifugal sedimentation (DCS), and nanoparticle tracking analysis (NTA) were compared to the established techniques of transmission electron microscopy (TEM), scanning mobility particle sizing (SMPS), and dynamic light scattering (DLS). The size distributions were described using the mode, arithmetic mean, and standard deviation. Uncertainties associated with the six techniques were evaluated, including the statistical uncertainties in the mean sizes measured by the single-particle counting techniques. Q-Q plots were used to analyze the shapes of the size distributions. Through the use of complementary techniques for particle sizing, a more complete characterization of the particles was achieved, with additional information on their density and porosity attained.

  16. BER of flat-topped Gaussian beam in slant path turbulent atmosphere

    NASA Astrophysics Data System (ADS)

    Lu, Fang; Han, Yanyan; Han, Xiang-e.; Yang, Rui-ke

    2013-08-01

    Based on the theory of optical wave propagation in the slant path and the ITU-R turbulence structure constant model which is dependent on altitude, the on-axis scintillation index of the flat-topped Gaussian beam at the receiver plane in slant path turbulence was given by using Kolmogorov atmospheric turbulence power spectrum model. The influences of the link altitudes, atmospheric refractive index structure constant C0 at the ground,the source size and the beam order on scintillation index of the flat-topped Gaussian beam are discussed in detail. The result shows that the scintillation index increased first and then decreased with the increase of the beam order. The advantage of a flat-topped Gaussian beam over a single Gaussian beam is restricted to small source sizes, which is consistent with the case of the horizontal path. To find the average bit error rate under weak slant path turbulence, the log-normal distribution model of the intensity fluctuation was used. The influence of beam order and source size on BER was discussed. The result indicates that the smaller sized flat-topped Gaussian beam will bring average bit error rate advantage over the same size Gaussian beam. Our results correctly reduce to the result of the horizontal path with atmospheric structure constant fixed.

  17. Extending the Capabilities of the CaBER with Highly Sensitive Force Measurements

    NASA Astrophysics Data System (ADS)

    Klein, Christopher; Naue, Ingo; Wilhelm, Manfred; Brummer, Rüdiger; Nijman, Jint

    2008-07-01

    When trying to measure the extensional (elastic) properties of samples like cosmetic emulsions with the CaBER one quickly runs into the physical limitations of the capillary breakup technique on which this instrument is based. Due to the specific sample structure and the lack of a substantial surface tension a cylindrical fluid filament and therefore a capillary flow are not properly developed. As a consequence the interpretation of the measurement results is problematic. Since there is an industrial interest in measuring properties like strand formation, stickiness, spreadability etc. which are related to extensional properties a different measuring technique is needed. In this paper we present a solution which is based on measuring the normal force acting on the lower plate when the upper plate is quickly moved upwards thereby extending the sample. In order to be able to measure the small forces (in the order of milli Newton) that arise in very short times (in the order of milli seconds) a state of the art Kistler force transducer was used in combination with modern data oversampling techniques to increase the sensitivity of the transducer. Details on the technical realization as well as first experimental results are presented.

  18. Killing, letting die and euthanasia.

    PubMed Central

    Husak, D N

    1979-01-01

    Medical ethicists debate whether or not the moral assessment of cases of euthanasia should depend on whether the patient is 'killed' or 'allowed to die'. The usual presupposition is that a clear distinction between killing and letting die can be drawn so that this substantive question is not begged. I contend that the categorisation of cases of instances of killing rather than as instances of letting die depends in part on a prior moral assessment of the case. Hence is it trivially rather than substantively true that the distinction has moral significance. But even if a morally neutral (ie non-question begging) distinction could be drawn, its application to the euthanasia controversy is problematic. I illustrate the difficulties of employing this distinction to reach moral conclusions by critically discussing Philippa Foot's recent treatment of euthanasia. I conclude that even if an act of euthanasia is an instance of killing, and there exists a prima facie moral duty not to kill, and no more stringent duty overrides this duty, one still cannot determine such an act to be morally impermissible. PMID:541821

  19. Adolescents’ Perceived Risk of Dying

    PubMed Central

    Fischhoff, Baruch; de Bruin, Wändi Bruine; Parker, Andrew M.; Millstein, Susan G.; Halpern-Felsher, Bonnie L.

    2009-01-01

    Purpose Although adolescents’ expectations are accurate or moderately optimistic for many significant life events, they greatly overestimate their chances of dying soon. We examine here whether adolescents’ mortality judgments are correlated with their perceptions of direct threats to their survival. Such sensitivity would indicate the importance of ensuring that adolescents have accurate information about those threats, as well as the psychological support needed to deal with them. Methods Data from two separate studies were used: a national study of 3,436 14–18 year old adolescents and a regional sample of 124 7th graders and 132 9th graders, 12–16 years old. Participants were asked about their chance of dying in the next year and before age 20, and about the extent of various threats to their physical well being. Results Adolescents in both samples greatly overestimated their chance of dying. Those mortality estimates were higher for adolescents who reported direct threats (e.g., an unsafe neighborhood). Thus, adolescents were sensitive to the relative size of threats to their survival, but not to the implications for absolute risk levels. Conclusions Contrary to the folk wisdom that adolescents have a unique sense of invulnerability, those studied here reported an exaggerated sense of mortality, which was highest among those reporting greater threats in their lives. Such fears could affect adolescents’ short-term well being and future planning. PMID:20159504

  20. Killing, letting die and euthanasia.

    PubMed

    Husak, D N

    1979-12-01

    Medical ethicists debate whether or not the moral assessment of cases of euthanasia should depend on whether the patient is 'killed' or 'allowed to die'. The usual presupposition is that a clear distinction between killing and letting die can be drawn so that this substantive question is not begged. I contend that the categorisation of cases of instances of killing rather than as instances of letting die depends in part on a prior moral assessment of the case. Hence is it trivially rather than substantively true that the distinction has moral significance. But even if a morally neutral (ie non-question begging) distinction could be drawn, its application to the euthanasia controversy is problematic. I illustrate the difficulties of employing this distinction to reach moral conclusions by critically discussing Philippa Foot's recent treatment of euthanasia. I conclude that even if an act of euthanasia is an instance of killing, and there exists a prima facie moral duty not to kill, and no more stringent duty overrides this duty, one still cannot determine such an act to be morally impermissible.

  1. Letting die and mercy killing.

    PubMed

    Narbekovas, Andrius; Meilius, Kazimieras

    2003-01-01

    We are all called to make moral decisions, not only about preserving life and health, but also about accepting our death and dying. There are situations, when it is morally right, and indeed obligatory, to allow a dying person to die in peace and dignity. But there is a world of difference between allowing a peaceful death, and deliberately setting out to bring death of the person either by acts of commission (s.c. 'active euthanasia'), or by acts of omission (s.c. 'passive euthanasia'). The word "killing" seems proper for euthanasia, because "to kill" does mean " to intentionally cause the death of someone." It can be morally acceptable to withhold or withdraw a treatment precisely because it is reasonably judged as inefficacious (futile), or excessively burdensome for the patient. One's reason for withholding such treatment must not be a judgement about the desirability of putting an end to the patient's life, but a judgement about the desirability of putting an end to the treatment, which is futile or burdensome.

  2. Guide for extrusion dies eliminates straightening operation

    NASA Technical Reports Server (NTRS)

    Gyorgak, C. A.; Hoover, R. J.

    1964-01-01

    To prevent distortion of extruded metal, a guidance assembly is aligned with the die. As the metal emerges from the extrusion dies, it passes directly into the receiver and straightening tube system, and the completed extrusion is withdrawn.

  3. Contoured Orifice for Silicon-Ribbon Die

    NASA Technical Reports Server (NTRS)

    Mackintosh, B. H.

    1985-01-01

    Die configuration encourages purity and stable growth. Contour of die orifice changes near ribbon edges. As result, silicon ribbon has nearly constant width and little carbon contamination. Die part of furnace being developed to produce high-quality, low-cost material for solar cells.

  4. Contoured Orifice for Silicon-Ribbon Die

    NASA Technical Reports Server (NTRS)

    Mackintosh, B. H.

    1985-01-01

    Die configuration encourages purity and stable growth. Contour of die orifice changes near ribbon edges. As result, silicon ribbon has nearly constant width and little carbon contamination. Die part of furnace being developed to produce high-quality, low-cost material for solar cells.

  5. Abundance of BER-related proteins depends on cell proliferation status and the presence of DNA polymerase β.

    PubMed

    Yamamoto, Mizuki; Yamamoto, Ryohei; Takenaka, Shigeo; Matsuyama, Satoshi; Kubo, Kihei

    2015-07-01

    In mammalian cells, murine N-methylpurine DNA glycosylase (MPG) removes bases damaged spontaneously or by chemical agents through the process called base excision repair (BER). In this study, we investigated the influence of POL β deficiency on MPG-initiated BER efficiency and the expression levels of BER-related proteins in log-phase and growth-arrested (G(0)) mouse embryonic fibroblasts (MEFs). G(0) wild-type (WT) or POL β-deficient (Pol β-KO) cells showed greater resistance to methyl methanesulfonate than did log-phase cells, and repair of methylated bases was less efficient in the G(0) cells. Apex1 mRNA expression was significantly lower in Pol β-KO or G(0) WT MEFs than in log-phase WT MEFs. Moreover, although Mpg mRNA levels did not differ significantly among cell types, MPG protein levels were significantly higher in log-phase WT cells than in log-phase Pol β-KO cells or either type of G(0) cells. Additionally, proliferating cell nuclear antigen protein levels were also reduced in log-phase Pol β-KO cells or either type of G(0) cells. These results indicated that MPG-initiated BER functions mainly in proliferating cells, but less so in G(0) cells, and that POL β may be involved in regulation of the amount of intracellular repair proteins. © The Author 2015. Published by Oxford University Press on behalf of The Japan Radiation Research Society and Japanese Society for Radiation Oncology.

  6. Optimization of C/N and current density in a heterotrophic/biofilm-electrode autotrophic denitrification reactor (HAD-BER).

    PubMed

    Tong, Shuang; Chen, Nan; Wang, Heng; Liu, Hengyuan; Tao, Chen; Feng, Chuanping; Zhang, Baogang; Hao, Chunbo; Pu, Jiaoyang; Zhao, Jiamin

    2014-11-01

    In this study, central composite design (CCD) and response surface methodology (RSM) were applied to optimize the C/N and current density in a heterotrophic/biofilm-electrode autotrophic denitrification reactor (HAD-BER). Results showed that nitrate could be effectively reduced over a wide range of C/Ns (0.84-1.3535) and current densities (96.8-370.0 mA/m(2)); however, an optimum C/N of 1.13 and optimum current density of 239.6 mA/m(2) were obtained by RSM. Moreover, the HAD-BER performance under the optimum conditions resulted in almost 100% nitrate-N removal efficiency and low nitrite-N and ammonia-N accumulation. Furthermore, under the optimum conditions, H2 generated from water electrolysis matched the CO2 produced by heterotrophic denitrification by stoichiometric calculation. Therefore, CCD and RSM could be used to acquire optimum operational conditions and improve the nitrate removal efficiency and energy consumption in the HAD-BER. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Average BER and outage probability of the ground-to-train OWC link in turbulence with rain

    NASA Astrophysics Data System (ADS)

    Zhang, Yixin; Yang, Yanqiu; Hu, Beibei; Yu, Lin; Hu, Zheng-Da

    2017-09-01

    The bit-error rate (BER) and outage probability of optical wireless communication (OWC) link for the ground-to-train of the curved track in turbulence with rain is evaluated. Considering the re-modulation effects of raining fluctuation on optical signal modulated by turbulence, we set up the models of average BER and outage probability in the present of pointing errors, based on the double inverse Gaussian (IG) statistical distribution model. The numerical results indicate that, for the same covered track length, the larger curvature radius increases the outage probability and average BER. The performance of the OWC link in turbulence with rain is limited mainly by the rain rate and pointing errors which are induced by the beam wander and train vibration. The effect of the rain rate on the performance of the link is more severe than the atmospheric turbulence, but the fluctuation owing to the atmospheric turbulence affects the laser beam propagation more greatly than the skewness of the rain distribution. Besides, the turbulence-induced beam wander has a more significant impact on the system in heavier rain. We can choose the size of transmitting and receiving apertures and improve the shockproof performance of the tracks to optimize the communication performance of the system.

  8. Effects of plasma on polyethylene fiber surface for prosthodontic application

    PubMed Central

    SPYRIDES, Silvana Marques Miranda; do PRADO, Maíra; de ARAUJO, Joyce Rodrigues; SIMÃO, Renata Antoun; BASTIAN, Fernando Luis

    2015-01-01

    ABSTRACT Plasma technology has the potential to improve the adherence of fibers to polymeric matrices, and there are prospects for its application in dentistry to reinforce the dental particulate composite. Objectives This study aimed to investigate the effect of oxygen or argon plasma treatment on polyethylene fibers. Material and Methods Connect, Construct, InFibra, and InFibra treated with oxygen or argon plasma were topographically evaluated by scanning electron microscopy (SEM), and chemically by X-ray photoelectron spectroscopy (XPS). For bending analysis, one indirect composite (Signum) was reinforced with polyethylene fiber (Connect, Construct, or InFibra). The InFibra fiber was subjected to three different treatments: (1) single application of silane, (2) oxygen or argon plasma for 1 or 3 min, (3) oxygen or argon plasma and subsequent application of silane. The samples (25x2x2 mm), 6 unreinforced and 60 reinforced with fibers, were subjected to three-point loading tests to obtain their flexural strength and deflection. The results were statistically analyzed with ANOVA and the Bonferroni correction for multiple comparison tests. Results SEM analysis showed that oxygen and argon plasma treatments promote roughness on the polyethylene fiber surface. X-ray photoelectron spectroscopy (XPS) analysis shows that both plasmas were effective in incorporating oxygenated functional groups. Argon or oxygen plasma treatment affected the flexural strength and deflection of a fiber reinforced composite. The application of silane does not promote an increase in the flexural strength of the reinforced composites. Conclusions Oxygen and argon plasma treatments were effective in incorporating oxygenated functional groups and surface roughness. The highest strength values were obtained in the group reinforced with polyethylene fibers treated with oxygen plasma for 3 min. PMID:26814463

  9. Effects of plasma on polyethylene fiber surface for prosthodontic application.

    PubMed

    Spyrides, Silvana Marques Miranda; Prado, Maíra do; Araujo, Joyce Rodrigues de; Simão, Renata Antoun; Bastian, Fernando Luis

    2015-01-01

    Plasma technology has the potential to improve the adherence of fibers to polymeric matrices, and there are prospects for its application in dentistry to reinforce the dental particulate composite. Objectives This study aimed to investigate the effect of oxygen or argon plasma treatment on polyethylene fibers. Connect, Construct, InFibra, and InFibra treated with oxygen or argon plasma were topographically evaluated by scanning electron microscopy (SEM), and chemically by X-ray photoelectron spectroscopy (XPS). For bending analysis, one indirect composite (Signum) was reinforced with polyethylene fiber (Connect, Construct, or InFibra). The InFibra fiber was subjected to three different treatments: (1) single application of silane, (2) oxygen or argon plasma for 1 or 3 min, (3) oxygen or argon plasma and subsequent application of silane. The samples (25x2x2 mm), 6 unreinforced and 60 reinforced with fibers, were subjected to three-point loading tests to obtain their flexural strength and deflection. The results were statistically analyzed with ANOVA and the Bonferroni correction for multiple comparison tests. SEM analysis showed that oxygen and argon plasma treatments promote roughness on the polyethylene fiber surface. X-ray photoelectron spectroscopy (XPS) analysis shows that both plasmas were effective in incorporating oxygenated functional groups. Argon or oxygen plasma treatment affected the flexural strength and deflection of a fiber reinforced composite. The application of silane does not promote an increase in the flexural strength of the reinforced composites. Oxygen and argon plasma treatments were effective in incorporating oxygenated functional groups and surface roughness. The highest strength values were obtained in the group reinforced with polyethylene fibers treated with oxygen plasma for 3 min.

  10. Monitoring of the spatial and temporal dynamics of BER/SSBR pathway proteins, including MYH, UNG2, MPG, NTH1 and NEIL1-3, during DNA replication.

    PubMed

    Bj Rås, Karine Ø; Sousa, Mirta M L; Sharma, Animesh; Fonseca, Davi M; S Gaard, Caroline K; Bj Rås, Magnar; Otterlei, Marit

    2017-08-21

    Base lesions in DNA can stall the replication machinery or induce mutations if bypassed. Consequently, lesions must be repaired before replication or in a post-replicative process to maintain genomic stability. Base excision repair (BER) is the main pathway for repair of base lesions and is known to be associated with DNA replication, but how BER is organized during replication is unclear. Here we coupled the iPOND (isolation of proteins on nascent DNA) technique with targeted mass-spectrometry analysis, which enabled us to detect all proteins required for BER on nascent DNA and to monitor their spatiotemporal orchestration at replication forks. We demonstrate that XRCC1 and other BER/single-strand break repair (SSBR) proteins are enriched in replisomes in unstressed cells, supporting a cellular capacity of post-replicative BER/SSBR. Importantly, we identify for the first time the DNA glycosylases MYH, UNG2, MPG, NTH1, NEIL1, 2 and 3 on nascent DNA. Our findings suggest that a broad spectrum of DNA base lesions are recognized and repaired by BER in a post-replicative process. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  11. Rotary press utilizing a flexible die wall.

    PubMed

    Amidon, G E; Smith, D P; Hiestand, E N

    1981-06-01

    A die with a flexible wall was constructed and evaluated on a specially modified instrumented rotary tablet press. The design permits an inward deflection of the die wall by a side punch, which rolls past a side compression roll during compression-decompression. The side compression roll is instrumented to monitor the applied side compression roll forces. On decompression, return of the die wall to its original position permits release of residual die wall pressure. The decreased residual die wall pressure can decrease fracture and capping of tablets for problem formulations. The performance was tested on three experimental formulations. For these formulations, tablets made in a conventional die exhibited severe capping problems. However, most tablets compressed in the special die were superior. With proper adjustment of punch and die wall compression forces, excellent tablets could be manufactured. The merits of the special die and modified tablet machine are substantiated, although this initial design did not provide adequate die wall pressure for all formulations. Further engineering efforts could result in practical production equipment.

  12. Psychiatry and the dying prisoner.

    PubMed

    Hanson, Annette

    2017-02-01

    Due to the growing number of ageing prisoners in the American correctional system, penal institutions are increasingly caring for patients with chronic and potentially terminal medical conditions. To address this problem states have attempted sentencing reform initiatives and adopted compassionate release programmes; however, these efforts have failed to significantly reduce the number of elderly or seriously ill inmates. Correctional mental health services are now called upon to aid in the care of prisoners at the end of life. This article presents the common elements of prison hospice programmes and the role psychiatry plays in this multidisciplinary effort. The right-to-die movement holds future implications for correctional mental health professionals. The historical and legal background of this international movement is presented with particular attention given to landmark cases and statutes protecting institutionalized patients.

  13. Should assisted dying be legalised?

    PubMed Central

    2014-01-01

    When an individual facing intractable pain is given an estimate of a few months to live, does hastening death become a viable and legitimate alternative for willing patients? Has the time come for physicians to do away with the traditional notion of healthcare as maintaining or improving physical and mental health, and instead accept their own limitations by facilitating death when requested? The Universities of Oxford and Cambridge held the 2013 Varsity Medical Debate on the motion “This House Would Legalise Assisted Dying”. This article summarises the key arguments developed over the course of the debate. We will explore how assisted dying can affect both the patient and doctor; the nature of consent and limits of autonomy; the effects on society; the viability of a proposed model; and, perhaps most importantly, the potential need for the practice within our current medico-legal framework. PMID:24423249

  14. Bacteria Interactions with Dying Diatoms

    NASA Astrophysics Data System (ADS)

    Smriga, S.; Juarez, G.; Fernandez, V.; Stocker, R.

    2016-02-01

    Dying phytoplankton are surrounded by microscale gradients of dissolved organic matter (DOM) that can attract bacteria. These 'phycospheres' may impact the trophic transfer of DOM in the marine microbial food web and enable the growth of bacterial populations, yet these effects remain poorly quantified particularly in relation to the physiological state of the phytoplankton. We dissected phycosphere interactions at unprecedented spatial and temporal resolution using the model diatom Thalassiosira weissflogii and the bacterium Marinobacter adhaerans. Diatom stress was stimulated by addition of polyunsaturated aldehyde (PUA) and both diatom and bacterial responses were captured via time-lapse fluorescence microscopy. We found that stressed diatoms underwent lysis 10-15 h after PUA treatment. Coordinated with the timing of this transition into phytodetritus, wild-type Marinobacter accumulated via chemotaxis near the diatoms immediately following lysis. In contrast, at lysis there was no accumulation of either a non-chemotactic or a non-motile mutant of Marinobacter, pointing to behavioral rather than demographic responses as drivers for the accumulation. Despite the lack of response, non-chemotactic as well as non-swimming bacterial cells that by chance attached to or were located near (<30 µm) stressed diatoms experienced more growth than cells further afield. Growth within the phycosphere was even greater after diatom lysis. Through quantification at the microscale, these results reveal that chemotaxis may precede rapid bacterial attachment to stressed and dying diatoms and may be integral to the microbial colonization of new phytodetritus during phytoplankton blooms and bloom collapses in coastal ecosystems. Even while chemotactic cells retain a growth advantage given their ability to sense and respond to lysis events, phycosphere DOM provides growth benefits to both motile and non-motile taxa that become attached to or happen to be co-located with new

  15. Evaluation of permanent die coatings to improve the wear resistance of die casting dies. Final project report, January 1, 1995--April 30, 1997

    SciTech Connect

    Shivpuri, R.

    1997-09-18

    Die Casting dies are subject to severe service conditions during the die casting operation. While these severe conditions are necessary to achieve high production rates, they cause the dies which are commonly made of H13 die steel, to suffer frequent failures. The major die failure mechanisms are erosion or washout, Heat checking, soldering and corrosion. Due to their geometrical complexity, die casting dies are very expensive (some dies cost over a million dollars), and thus a large number of parts have to be produced by a die, to justify this cost and leverage the advantages of the die casting process (high production rates, low manpower costs). A potential increase in the die service life, thus has a significant impact on the economics of the die; casting operation. There are many ways to extend die life: developing new wear resistant die materials, developing new surface treatments including coatings, improving heat treatment of existing H13 dies, using better lubricants that can protect the die material, or modifying the die geometry and process parameters to reduce the intensity of wear. Of these the use of coatings to improve the wear resistance of the die surface has shown a lot of promise. Consequently, use of coatings in the die casting industry and their wide use to decrease die wear can improve significantly the productivity of shop operations resulting in large savings in material and energy usage.

  16. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  17. Die singulation method and package formed thereby

    DOEpatents

    Anderson, Robert C [Tucson, AZ; Shul, Randy J [Albuquerque, NM; Clews, Peggy J [Tijeras, NM; Baker, Michael S [Albuquerque, NM; De Boer, Maarten P [Albuquerque, NM

    2012-08-07

    A method is disclosed for singulating die from a substrate having a sacrificial layer and one or more device layers, with a retainer being formed in the device layer(s) and anchored to the substrate. Deep Reactive Ion Etching (DRIE) etching of a trench through the substrate from the bottom side defines a shape for each die. A handle wafer is then attached to the bottom side of the substrate, and the sacrificial layer is etched to singulate the die and to form a frame from the retainer and the substrate. The frame and handle wafer, which retain the singulated die in place, can be attached together with a clamp or a clip and to form a package for the singulated die. One or more stops can be formed from the device layer(s) to limit a sliding motion of the singulated die.

  18. Reinraumtechnik für die Medizintechnik

    NASA Astrophysics Data System (ADS)

    Petek, Max; Jungbluth, Martin; Krampe, Erhard

    Die Reinraumtechnik ist heute ein unverzichtbarer Bestandteil bei der Fertigung von Produkten der Life Sciences, den Bereichen Pharma, Lebensmittel, Kosmetik und Medizintechnik. In Anbetracht der langen Historie der Medizintechnik ist sie jedoch eine sehr junge Disziplin. Die Bedeutung von Keimen und die richtige Einschätzung ihrer Größe wurden zwar sehr früh bereits durch Paracelsus erkannt, jedoch wurden daraus noch keine speziellen oder kontinuierlich umgesetzten Hygienevorschriften abgeleitet. Die erste bekannte technische Umsetzung von Hygieneempfehlungen geht auf den Franzosen François Nicolas Appert zurück, der eine aseptische Abfüllmethode für Lebensmittel entwickelte und diese 1810 veröffentlichte [1]. Die erste dokumentierte medizinische Umsetzung stellten Hygienevorschriften für Ärzte dar, die Ignaz Philipp Semmelweis nach 1847 in der Wiener Klinik für Geburtshilfe einführte [2].

  19. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  20. Asymptotic BER analysis of FSO with multiple receive apertures over ℳ -distributed turbulence channels with pointing errors.

    PubMed

    Yang, Liang; Hasna, Mazen Omar; Gao, Xiqi

    2014-07-28

    In this paper, we consider a free-space optical (FSO) communication with multiple receive apertures over ℳ -distributed turbulence channels with pointing errors. In particular, we consider two different combining schemes at the receiver: optimal combining (OC) and selection combining (SC). With these setups, the statistic characters of the instantaneous electrical signal-to-noise ratio (SNR) are derived. Then, using the cumulative density function (CDF)-based method, we analyze the asymptotic bit-error rate (BER) performance. The derived results help quantifying the diversity order of our considered systems.

  1. Goethe almost died of urosepsis.

    PubMed

    Gross, A J; Hummel, G

    1999-12-01

    In the year of 1805, Goethe almost died of urosepsis. His urological problems were not diseases arising from full health but a new variation in a life accompanied by illnesses. Some sources date the first colics he experienced to the year 1795 and others say 1805. The most dramatic period in the course of his illness was in February, when he suffered from fever of such an extent that one could speak of urosepsis. Recovery took place slowly and was accompanied by minor relapses. Nothing about this is written down in his work. On the advice of his doctors, Goethe undertook a cure in Lauchstädt in July and August. The report of his consultant, Professor Johann Christian Reil, on his problems in the field of urology remained undiscovered until 1937. Professor Reil recommended treatment with thermae carolinae, aqua calcis, soap soda crystallisata, herbae subastringentes, and uva ursi, among other measures. With increasing age, Goethe's colics disappeared. The passing of a stone has never been described. Whereas Goethe hinted about medical problem other than those reported herein, the urological problems discussed in this article were left unmentioned. Nonetheless, literature that deals with Goethe's diseases is interesting from the aspect of both the history of medicine and the history of culture.

  2. Die Evolution der Religiosität

    NASA Astrophysics Data System (ADS)

    Voland, Eckart

    Ein konsequent darwinischer Blick auf den Menschen bedeutet, auch im Denken, Fühlen und Handeln biologische Anpassungsgeschichte zu suchen, denn auch die psychischen und mentalen Eigenheiten des Homo sapiens unterliegen der natürlichen Selektion. Lässt sich die religiöse Lebenspraxis von Menschen daher auch aus einer Fitnessperspektive betrachten?

  3. The Right To Die. Public Talk Series.

    ERIC Educational Resources Information Center

    Pasquerella, Lynn

    This program guide on the right to die provides policy issue information where ethical concerns have a prominent place. Three positions about the right to die are presented: (1) mercy killing and assisted suicide should be legally permitted in certain cases; (2) legal status should be given to living wills and other advance directives that would…

  4. Apparatus for restraining and transporting dies

    DOEpatents

    Allison, James W.; LaBarre, Timothy L.

    1994-01-01

    Apparatus for restraining and transporting dies in punch press operations is provided. A floatation platen for supporting a die on the platen's upper surface has a plurality of recessed gas exhaust ports on the platen's lower surface. A source of pressurized gas delivers gas to a platen manifold, for delivery to orifices located in the gas exhaust ports. The flow of gas is controlled by a first valve adjacent the gas source and a second valve adjacent the manifold, with the second valve being used to control the gas flow during movement of the die. In this fashion, a die may be moved on a cushion of air from one workstation to a selected second workstation. A moveable hydraulically operated restraining fixture is also provided, for clamping the die in position during the compacting phase, and for releasing the die after completion of the compacting phase by releasing the hydraulic pressure on the restraining fixture. When pressure in the hydraulic cylinders on the restraining fixture is reversed, the restraining fixture will retract so that there is no contact between the die and the restraining fixture, thereby allowing the die to be removed from a first workstation and moved to a second selected workstation.

  5. Death and Dying: Issues for Educational Gerontologists.

    ERIC Educational Resources Information Center

    Wass, Hannelore, Myers, Jane E.

    1984-01-01

    Reviews research on death orientations, the dying process, and bereavement, with a major focus on the elderly. Suggests that relevant knowledge about death and dying are important for gerontological practitioners and proposes that death-related content be systematically integrated into academic curricula at the preservice and inservice levels.…

  6. Energy Consumption of Die Casting Operations

    SciTech Connect

    Jerald Brevick; clark Mount-Campbell; Carroll Mobley

    2004-03-15

    Molten metal processing is inherently energy intensive and roughly 25% of the cost of die-cast products can be traced to some form of energy consumption [1]. The obvious major energy requirements are for melting and holding molten alloy in preparation for casting. The proper selection and maintenance of melting and holding equipment are clearly important factors in minimizing energy consumption in die-casting operations [2]. In addition to energy consumption, furnace selection also influences metal loss due to oxidation, metal quality, and maintenance requirements. Other important factors influencing energy consumption in a die-casting facility include geographic location, alloy(s) cast, starting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting machine, related equipment (robots, trim presses), and downstream processing (machining, plating, assembly, etc.). Each of these factors also may influence the casting quality and productivity of a die-casting enterprise. In a die-casting enterprise, decisions regarding these issues are made frequently and are based on a large number of factors. Therefore, it is not surprising that energy consumption can vary significantly from one die-casting enterprise to the next, and within a single enterprise as function of time.

  7. Student Nurses' Perception of Death and Dying

    ERIC Educational Resources Information Center

    Niederriter, Joan E.

    2009-01-01

    Student nurses are involved in caring for patients who are actively dying or who have been told they have a terminal illness and are faced with the process of dying. Students encounter these patients in hospitals, nursing homes, at home or in hospice care settings. According to Robinson (2004), "nurses are the healthcare providers that are most…

  8. Puzzling cases about killing and letting die.

    PubMed

    Favor, C D

    1996-01-01

    Discussions of euthanasia often appeal to the distinction between killing people and letting them die. Favor asks whether this distinction is morally important--in particular, whether killing is worse than merely letting someone die, even when the motivations and consequences are the same. She explores our moral intuitions via a discussion of various subtly different hypothetical examples.

  9. Killing and letting die: a defensible distinction.

    PubMed

    Cartwright, W

    1996-04-01

    The distinction between killing and letting die is investigated and clarified. It is then argued that in most cases, though not in all, it is worse to kill than to let die. In euthanasia the significance of the distinction is diminished, but still important.

  10. Prediction of Part Distortion in Die Casting

    SciTech Connect

    R. Allen Miller

    2005-03-30

    The die casting process is one of the net shape manufacturing techniques and is widely used to produce high production castings with tight tolerances for many industries. An understanding of the stress distribution and the deformation pattern of parts produced by die casting will result in less deviation from the part design specification, a better die design and eventually more productivity and cost savings. This report presents methods that can be used to simulate the die casting process in order to predict the deformation and stresses in the produced part and assesses the degree to which distortion modeling is practical for die casting at the current time. A coupled thermal-mechanical finite elements model was used to simulate the die casting process. The simulation models the effect of thermal and mechanical interaction between the casting and the die. It also includes the temperature dependant material properties of the casting. Based on a designed experiment, a sensitivity analysis was conducted on the model to investigate the effect of key factors. These factors include the casting material model, material properties and thermal interaction between casting and dies. To verify the casting distortion predictions, it was compared against the measured dimensions of produced parts. The comparison included dimensions along and across the parting plane and the flatness of one surface.

  11. Student Nurses' Perception of Death and Dying

    ERIC Educational Resources Information Center

    Niederriter, Joan E.

    2009-01-01

    Student nurses are involved in caring for patients who are actively dying or who have been told they have a terminal illness and are faced with the process of dying. Students encounter these patients in hospitals, nursing homes, at home or in hospice care settings. According to Robinson (2004), "nurses are the healthcare providers that are most…

  12. BER Analysis of Dual-Hop Amplify-and-Forward MIMO Relaying with Best Antenna Selection in Rayleigh Fading Channels

    NASA Astrophysics Data System (ADS)

    Kim, Jung-Bin; Kim, Dongwoo

    Combining relaying and multi-input multi-output (MIMO) transmission is a generic way to overcome the channel-fading impairments. Best antenna selection is a simple but efficient MIMO method that achieves the full diversity and also serves as a lower bound reference of MIMO performance. For a dual-hop MIMO system with an ideal amplify-and-forward (AF) relaying gain and best antenna selection, we provide a probability density function (PDF) of received signal-to-noise ratio (SNR) and an analytic BER equation when using M-ary PSK in Rayleigh fading channels. The analytic result is shown to exactly match with simulated one. Furthermore, the effect of link unbalance between the first hop and the second hop, due to differences in the number of antennas deployed in both hops as well as in the average power of channel coefficients, on the BER performance is numerically investigated and the results show that the links with better balance give better performance.

  13. Different sensitivity of CD30+ cell lines to Ber-H2/saporin-S6 immunotoxin.

    PubMed

    Battelli, M G; Bolognesi, A; Olivieri, F; Polito, L; Stirpe, F

    1998-01-01

    The in vitro sensitivity of cells to a Ber-H2(anti-CD30)/saporin-S6 immunotoxin has been investigated. The CD30+ cell lines, K562, L428 and L540, were used to study cell binding, uptake and degradation of the immunotoxin. K562 cells were less sensitive than L428 and L540 cells to the immunotoxin by approximately one order of magnitude. The difference in cytotoxicity correlated with the intracellular accumulation and with the ratio of degraded over total internalized Ber-H2/saporin-S6, regardless of the immunotoxin binding to the cells. After 6 h incubation, the less sensitive K562 cells (i) accumulated only one third and one tenth of the immunotoxin accumulated by the more sensitive L428 and L540 cells, respectively, and (ii) degraded two thirds of the internalized protein versus one third degraded by either L428 or L540 cells. Ammonium chloride and chloroquine reduced the cytotoxicity of the immunotoxin towards K562 but not to L540 cells. This effect correlated with the increment of immunotoxin catabolism by K562 cells in the presence of chloroquine. In conclusion, uptake alone of an immunotoxin by target cells is not sufficient to assure its efficacy which might also depend on intracellular routing. Only a cytotoxicity test may be really predictive.

  14. Calculation of BER in multi-channel silicon optical interconnects: comparative analysis of strip and photonic crystal waveguides

    NASA Astrophysics Data System (ADS)

    You, Jie; Lavdas, Spyros; Panoiu, Nicolae C.

    2016-05-01

    We present an effective approach to evaluate the performance of multi-channel silicon (Si) photonic systems. The system is composed of strip Si photonic waveguides (Si-PhWs) with uniform cross-section or photonic-crystal (PhC) Si waveguides (Si-PhCWs), combined with a set of direct-detection receivers. Moreover, the optical field in each channel is the superposition of a continuous-wave nonreturn-to-zero ON-OFF keying modulated signal and a white Gaussian noise. In order to characterize the optical signal propagation in the waveguides, an accurate mathematical model describing all relevant linear and nonlinear optical effects and its linearized version is employed. In addition, two semi-analytical methods, time- and frequency-domain Karhunen-Loève series expansion, are used to assess the system bit-error-rate (BER). Our analysis reveals that Si-PhCWs provide similar performance as Si-PhWs, but for 100× shorter length. Importantly, much worse BER is achieved in Si-PhCWs when one operates in slow-light regime, due to the enhanced linear and nonlinear effects.

  15. Killing, letting die, and simple conflicts.

    PubMed

    Malm, H M

    1989-01-01

    Proponents of the moral equivalence of killing and letting die argue that in cases of simple conflict, where one agent must either perform a positive act and kill one person, or not perform that act and allow another person to die, the agent's alternatives are clearly morally equivalent. Malm rejects this view in a three part essay. He argues that in cases of simple conflict, the acts of killing and letting die are morally different, and that killing is not in itself worse than letting die. Malm considers and rejects the suggestion that the agent should decide randomly between the two alternatives. He concludes that while simple conflict cases require us to recognize a morally significant difference between killing and letting die, they do not require us to recognize a morally significant difference between acting and refraining.

  16. [Dying and death in societal transformation].

    PubMed

    Heller, Andreas; Wegleitner, Klaus

    2017-01-01

    Dying and death in modern societies are subject to profound social, professional and cultural-religious changes. Secularization and a stronger differentiation of societies have led to a change in the way humans handle the dying process. Normatively ritualized collective behaviour has been replaced by an individual, subjectivized approach. In late modern societies there are many different views of what "successful" or "good" dying means.In the article this change is described by the following seven theses: 1. We live longer and we die longer. 2. We no longer die suddenly and unexpectedly but slowly and foreseeably. 3. Even though our biological life on earth has become longer, our life has been shortened by the loss of eternity. 4. We no longer die on the stage of ritualized relationships with our family and neighbours but behind the curtains of organizations. 5. We live and die in a society of organizations and have to get organized for the final phase of our life. 6. Living and dying are no large, state-owned enterprises but small, private enterprises. 7. The hospice movement as well as palliative medicine have created public awareness, made dying a matter of discussion and offered a new set of options.In late modernism end-of-life care requires new approaches based on individual and shared responsibility as well as cooperation between professional institutions and community-based voluntary care.A change towards community care is visible. Thus "dying" is a topic in the discussion about the future of public health and societal solidarity.

  17. Awareness of dying: it needs words.

    PubMed

    Lokker, Martine E; van Zuylen, Lia; Veerbeek, Laetitia; van der Rijt, Carin C D; van der Heide, Agnes

    2012-06-01

    The purpose of this research is to study to what extent dying patients are aware of the imminence of death, whether such awareness is associated with patient characteristics, symptoms and acceptance of dying, and whether medical records and nurses' and family caregivers' views on patients' awareness of dying agree. Nurses and family caregivers of 475 deceased patients from three different care settings in the southwest Netherlands were requested to fill out questionnaires. The two groups were asked whether a patient had been aware of the imminence of death. Also, medical records were screened for statements indicating that the patient had been informed of the imminence of death. Nurses completed questionnaires about 472 patients, family caregivers about 280 patients (response 59%). According to the medical records, 51% of patients had been aware of the imminence of death; according to nurses, 58%; according to family caregivers, 62%. Patients who, according to their family caregiver, had been aware of the imminence of death were significantly more often in peace with dying and felt more often that life had been worth living. Inter-rater agreement on patients' awareness of dying was fair (Cohen's kappa = 0.23-0.31). Being aware of dying is associated with acceptance of dying, which supports the idea that open communication in the dying phase can contribute to the quality of the dying process. However, views on whether or not patients are aware of the imminence of death diverge between different caregivers. This suggests that communication in the dying phase of patients is open for improvement.

  18. Influence of die geometry and material selection on the behavior of protective die covers in closed-die forging

    NASA Astrophysics Data System (ADS)

    Yu, Yingyan; Rosenstock, Dirk; Wolfgarten, Martin; Hirt, Gerhard

    2016-10-01

    Due to the fact that tooling costs make up to 30% of total costs of the final forged part, the tool life is always one main research topic in closed-die forging [1]. To improve the wear resistance of forging dies, many methods like nitriding and deposition of ceramic layers have been used. However, all these methods will lose its effect after a certain time, then tool repair or exchange is needed, which requires additional time and costs. A new method, which applies an inexpensive and changeable sheet metal on the forging die to protect it from abrasive wear, was firstly proposed in [2]. According to the first investigation, the die cover is effective for decreasing thermal and mechanical loads, but there are still several challenges to overcome in this concept, like wrinkling and thinning of the die cover. Therefore, an experimental study using different geometries and die cover materials is presented within this work. The results indicate the existence of feasible application cases of this concept, since conditions are found under which a die cover made of 22MnB5 still keeps its original shape even after 7 forging cycles.

  19. [Where do people die?: On the question of dying in institutions].

    PubMed

    Thönnes, M; Jakoby, N R

    2011-10-01

    There is a great discrepancy in society between the number of people that prefer to die within their home and the number of cases where this wish actually becomes reality. The most frequent place of dying in Western societies is not the home but an institution, such as a hospital or nursing home. But what is the actual distribution of places of dying? Can we identify social patterns of dying related to the various places of dying? The article provides a theoretical and empirical overview of place of dying as a social phenomenon. Contemporary discourse on the institutionalization of dying is subjected to critical scrutiny in light of the state of the art of research.

  20. Average BER analysis of SCM-based free-space optical systems by considering the effect of IM3 with OSSB signals under turbulence channels.

    PubMed

    Lim, Wansu; Cho, Tae-Sik; Yun, Changho; Kim, Kiseon

    2009-11-09

    In this paper, we derive the average bit error rate (BER) of subcarrier multiplexing (SCM)-based free space optics (FSO) systems using a dual-drive Mach-Zehnder modulator (DD-MZM) for optical single-sideband (OSSB) signals under atmospheric turbulence channels. In particular, we consider the third-order intermodulation (IM3), a significant performance degradation factor, in the case of high input signal power systems. The derived average BER, as a function of the input signal power and the scintillation index, is employed to determine the optimum number of SCM users upon the designing FSO systems. For instance, when the user number doubles, the input signal power decreases by almost 2 dBm under the log-normal and exponential turbulence channels at a given average BER.

  1. Caring for dying people in hospital.

    PubMed

    Hopkinson, Jane B; Hallett, Christine E; Luker, Karen A

    2003-12-01

    Fifty-four per cent of people who die in England and Wales do so in hospital. Evidence suggests that care delivered to dying people in hospital does not match up to the ideal of a good death. These studies have provided organizational and structural explanations of nurses' behaviour that support argument for change at the macro level, in order to improve the quality of care delivered to dying people. There has been little study of the perceptions of nurses working in acute medical settings in relation to their experience of caring for dying people. Therefore, there is little evidence on which to base supportive strategies at the level of individual nurses. In this study we set out to develop an understanding of care for dying people in hospital, from the perspective of newly qualified staff nurses in the UK. The purpose was to build a theory of how nurses might be helped to deliver quality care to dying people in hospital. This paper is based on an exploratory study underpinned by phenomenological philosophy. In-depth interviews were conducted with 28 newly qualified nurses, focusing on their experiences of caring for dying people on medical wards in two acute hospitals in England in 1999. The interview transcripts were interpreted using a phenomenological approach. The findings presented in this paper relate to commonalities found to underlie study participants' perceptions of their experiences. All the nurses' stories were found to be built around six essences - the personal ideal, the actual, the unknown, the alone, tension and anti-tension. These essences, and the relationships between them, were used to build a model of the experience of caring for dying people in hospital. This descriptive study of the experience of individual nurses does not examine the wider social context. It attempts to complement existing sociological theory of death and dying. The study revealed how a group of newly qualified nurses experienced caring for dying people. We theorize that

  2. Antenatal detection of Meckel-Grüber syndrome in only one dizygotic twin following in vitro fertilization and embryo transfer.

    PubMed

    Shozu, M; Akimoto, K; Tanaka, J; Sonoda, Y; Inoue, M; Michikura, Y

    1997-01-01

    The first case of Meckel-Grüber syndrome in a dizygotic twin pregnancy following in vitro fertilization and embryo transfer is reported. An ultrasound examination at 26 weeks of gestation revealed multiple malformations of the presenting twin: the combination of an occipital encephalomeningocele, bilateral polycystic kidneys and postaxial polydactyly was suggestive of Meckel-Grüber syndrome. Diagnosis was confirmed after birth. The importance of this case is stressed since particular care must be taken to avoid multiple pregnancies in couples at risk undergoing assisted reproduction.

  3. STARS/LiBerACE: Segmented silicon and high-purity germanium detector arrays for low-energy nuclear reaction and structure studies

    NASA Astrophysics Data System (ADS)

    Lesher, S. R.; Phair, L.; Bernstein, L. A.; Bleuel, D. L.; Burke, J. T.; Church, J. A.; Fallon, P.; Gibelin, J.; Scielzo, N. D.; Wiedeking, M.

    2010-09-01

    The Silicon Telescope Array for Reaction Studies (STARS) consists of large-area annular double-sided silicon detectors for charged-particle identification. The Livermore Berkeley Array for Collaborative Experiments (LiBerACE) is an array of six Compton-suppressed high-purity germanium Clover detectors for efficient detection of γ-rays. These detector arrays are versatile tools for studies of neutron-induced reaction cross-sections, fission, light neutron-rich nuclei, and other low-energy nuclear physics topics through transfer, fusion, incomplete-fusion, and inelastic-scattering reactions. The STARS and LiBerACE arrays and typical experimental configurations are described in detail.

  4. Die konstanz der melkordnung von ziegen in großen gruppen.

    PubMed

    Sambraus, H H; Keil, N M

    1997-01-12

    ZUSAMMENFASSUNG: An zwei großen Ziegengruppen (Gehörnte und Hornlose) wurde geprüft, ob es eine Melkordnung gibt. Die Tiere wurden in einem landwirtschaftlichen Betrieb in Oberbayern in Laufställen gehalten. Zunächst wurde für jede Herde die Soziale Rangordnung ermittelt und für jedes Tier ein Dominanzindex errechnet. Gleichzeitig wurde über Wochen hinweg bei 17 Melkvorgängen (Gehörnte) bzw. 20 Melkvorgängen (Hornlose) die Melkordnung ermittelt. Die Untersuchung führte zu folgenden Ergebnissen: 1 . Der Platz in der Melkordnung schwankte individuell sehr viel weniger, als es bei zufälliger Wahl zu erwarten gewesen wäre. Viele Tiere nahmen bei jedem Melkvorgang annähernd denselben Platz in der Melkordnung ein. 2 . Eine Platzkonstanz bestand vor allem am Anfang und am Ende der Melkordnung. 3 . Es konnte kein Zusammenhang zwischen Melkordnung und Sozialer Rangordnung gefunden werden. 4 . Geißen mit höherer Milchleistung nahmen im allgemeinen frühere Plätze in der Melkordnung ein, als es zufälliger Verteilung entsprochen hätte. 5 . Zwischen gehörnten und hornlosen Tieren bestanden in allen Aspekten nur geringfügige Unterschiede. 6 . Es ist denkbar, daß die Melkordnung weniger von meßbaren Merkmalen als von Gewohnheitsbildung abhängt. Equality of ranking of goats at milking The existence of rank order at milking was investigated in two large groups of horned and polled goats, respectively. First, social rank was determined and an index of dominance constructed for each animal in each herd. Simultaneously, the ranking at milking was observed 17 times for horned and 20 times for the polled goats, respectively: 1 . The ranking at milking shows less than random variation. At each milking, animals assume roughly the same position. 2 . Uniformity of ranks was particularly evident at the beginning and at the end of milking. 3 . No connection was evident between social rank and milking rank. 4 . Higher yielding goats entered the milking parlour

  5. Casting Characteristics of Aluminum Die Casting Alloys

    SciTech Connect

    Makhlouf M. Makhlouf; Diran Apelian

    2002-02-05

    The research program investigates the casting characteristics of selected aluminum die casting alloys. Specifically, the alloys' tendencies towards die soldering and sludge formation, and the alloys' fluidity and machinability are evaluated. It was found that: When the Fe and Mn contents of the alloy are low; caution has to be taken against possible die soldering. When the alloy has a high sludge factor, particularly a high level of Fe, measures must be taken to prevent the formation of large hardspots. For this kind of alloy, the Fe content should be kept at its lowest allowable level and the Mn content should be at its highest possible level. If there are problems in die filling, measures other than changing the alloy chemistry need to be considered first. In terms of alloy chemistry, the elements that form high temperature compounds must be kept at their lowest allowable levels. The alloys should not have machining problems when appropriate machining techniques and machining parameters are used.

  6. House of Lords debates assisted dying (again).

    PubMed

    2003-07-01

    Lord Joffe's Patient (Assisted Dying) Bill (see Bulletin 187) had its Second Reading on 6 June. The debate was lively, informed and inevitably somewhat polarised. However, some common themes emerged and are outlined below.

  7. Is there a moral duty to die?

    PubMed

    Corlett, J A

    2001-01-01

    In recent years, there has been a great deal of philosophical discussion about the alleged moral right to die. If there is such a moral right, then it would seem to imply a moral duty of others to not interfere with the exercise of the right. And this might have important implications for public policy insofar as public policy ought to track what is morally right. But is there a moral duty to die? If so, under what conditions, if any, ought one to have such a duty, and why? In this paper, I distinguish between different moral grounds for the putative moral duty to die: deontological, intuitionist, and contractarian. Subsequently, I argue in support of Paul Menzel's theory of health care distribution. More precisely, I concur with his claim that there is a moral duty to die inexpensively in health care contexts. Then I provide and defend a philosophical analysis of the conditions in which such a duty could exist.

  8. Hubble View of a Dying Star

    NASA Image and Video Library

    2003-05-21

    This image of a dying star, protoplanetary nebula IRAS22036+5306, containing strange, complex structures may help explain the death throes of stars and defy our current understanding of physics. Taken by NASA Wide Field and Planetary Camera 2.

  9. Supporting dignified dying in the Philippines

    PubMed Central

    Doorenbos, Ardith Z; Abaquin, Carmencita; Perrin, Margot E; Eaton, Linda; Balabagno, Araceli O; Rue, Tessa; Ramos, Rita

    2011-01-01

    Purpose This study aimed to assess the appropriateness of the International Classification for Nursing Practice (ICNP) Palliative Care for Dignified Dying catalogue for palliative nursing in the Philippines. Methods The study recruited 230 nurses to complete the ICNP Dignified Dying survey. Participants rated ICNP nursing intervention items and identified additional interventions for promoting dignified dying. Results All of the intervention items were scored on average as being at least ‘slightly important’. The three top-ranked nursing intervention categories were providing social support, maintaining privacy boundaries, and relieving psychological distress. Conclusions The ICNP Palliative Care for Dignified Dying catalogue lists nursing interventions that are appropriate to promoting dignity at the end of life in the Philippines. PMID:21471908

  10. Psychometric analysis of Stöber's social desirability scale (SDS-17): an item response theory perspective.

    PubMed

    Tran, Ulrich S; Stieger, Stefan; Voracek, Martin

    2012-12-01

    Stöber's Social Desirability Scale (SDS-17) was examined psychometrically in 5 samples (N=2817) from Austria, Canada, and the U.S.A. Rasch and Mokken scaling analyses attested the SDS-17 is not strictly unidimensional. Age, agreeableness, and conscientiousness were notable positive correlates of SDS-17 scores. There were signs of non-normal score distributions, acquiescence bias, and sex and country differences (higher scores among Austrians than North Americans). Items with higher ratings of social desirability according to previous research were particularly prone to show sex effects. The SDS-17 appears suitable in cross-cultural settings, but may benefit from substituting its true-false response format with a rating-scale format. A formative-indicators view regarding the social desirability construct and the SDS-17 is discussed.

  11. The impact of pulsed RFI on the coded BER performance of the nonlinear satellite communication channel. [with BPSK modulation

    NASA Technical Reports Server (NTRS)

    Weinberg, A.

    1981-01-01

    An examination is conducted of the coded bit error rate (BER) performance of a satellite communication system in which binary phase-shift-keyed (BPSK) modulation is employed, pulsed CW or pulsed noise RFI is present, and the transponder contains a nonlinearity characterized by arbitrary AM/AM and AM/PM characteristics; the RFI pulse duration is further assumed to exceed that of the information symbol. Computed performance curves consider several hypothetical RFI scenarios in which either a hard limiter or an 8 dB clipper represent the transponder amplitude nonlinearity. Results demonstrate the potential seriousness of RFI duty cycles as low as 2 percent, and the fact that CW represents the most severe form of interference.

  12. End-to-end average BER analysis for multihop free-space optical communications with pointing errors

    NASA Astrophysics Data System (ADS)

    Sheng, Ming; Jiang, Peng; Hu, Qingsong; Su, Qin; Xie, Xiu-xiu

    2013-05-01

    This paper addresses the end-to-end average BER (ABER) performance of decode-and-forward (DF) relay free-space optical (FSO) communications over weak and strong turbulence channels with pointing errors. For the weak and strong turbulence channels, the probability distribution function (PDF) of the irradiance can be modeled by a lognormal and Gamma-Gamma distribution, respectively. Considering the effects from atmospheric attenuation, turbulence and pointing errors, we present a statistical model for the optical intensity fluctuation at the receiver. Then the end-to-end ABER performances are analyzed and derived closed-form expressions are obtained. The simulation results indicate that the derived closed-form expressions provide sufficiently accurate approximations.

  13. A BER analysis of a space-time signal processing scheme that combines transmitter diversity with beamforming

    NASA Astrophysics Data System (ADS)

    Kim, Ilhan; Chun, Joohwan

    2003-12-01

    We introduce a new space-time signal processing scheme that uses both transmitter diversity technique and beamforming technique for code-division multiple access (CDMA) systems. The introduced scheme achieves the diversity gain over Rayleigh fading channel through the transmitter diversity technique, and the signal-to-noise ratio (SNR) gain by the beamforming technique. Bit error rate (BER) analyses are given each of the three cases in which the transmitter diversity, beamforming and introduced combined scheme are used, in the frequency-flat Rayleigh fading channel. The analytic results are shown to coincide with the Monte-Carlo simulation results. We show that the combined scheme is more robust to the channel correlation and the speed of mobile than the diversity and beamforming scheme. Furthermore, the combined scheme gives a reduced multiple-access-interference because of its beamforming capability.

  14. Ber-EP4 and MNF-116 in a previously undescribed morphologic pattern of granular basal cell carcinoma.

    PubMed

    Hayden, A A; Shamma, H N

    2001-12-01

    Granular basal cell carcinoma (GBCC) is a rare subtype of basal cell carcinoma (BCC) with only seven previously described cases in the literature. A 65-year-old man presented with a papule on his cheek that was subsequently removed. Histopathologic examination revealed that the neoplasm had no connection to the overlying epidermis and that the neoplasm had two different morphologies; nodules composed solely of granular cells and other nodules with a rim of basaloid cells and central granular cells. The neoplasm stained for both Ber-EPF4 and MNF-116 thus confirming it as a subtype of BCC. GBCC should be considered in the differential diagnosis of nodular neoplasms containing granular cells.

  15. The impact of pulsed RFI on the coded BER performance of the nonlinear satellite communication channel. [with BPSK modulation

    NASA Technical Reports Server (NTRS)

    Weinberg, A.

    1981-01-01

    An examination is conducted of the coded bit error rate (BER) performance of a satellite communication system in which binary phase-shift-keyed (BPSK) modulation is employed, pulsed CW or pulsed noise RFI is present, and the transponder contains a nonlinearity characterized by arbitrary AM/AM and AM/PM characteristics; the RFI pulse duration is further assumed to exceed that of the information symbol. Computed performance curves consider several hypothetical RFI scenarios in which either a hard limiter or an 8 dB clipper represent the transponder amplitude nonlinearity. Results demonstrate the potential seriousness of RFI duty cycles as low as 2 percent, and the fact that CW represents the most severe form of interference.

  16. Celestial Fireworks from Dying Stars

    NASA Astrophysics Data System (ADS)

    2011-04-01

    This image of the nebula NGC 3582, which was captured by the Wide Field Imager on the MPG/ESO 2.2-metre telescope at ESO's La Silla Observatory in Chile, shows giant loops of gas bearing a striking resemblance to solar prominences. These loops are thought to have been ejected by dying stars, but new stars are also being born within this stellar nursery. These energetic youngsters emit intense ultraviolet radiation that makes the gas in the nebula glow, producing the fiery display shown here. NGC 3582 is part of a large star-forming region in the Milky Way, called RCW 57. It lies close to the central plane of the Milky Way in the southern constellation of Carina (The Keel of Jason's ship, the Argo). John Herschel first saw this complex region of glowing gas and dark dust clouds in 1834, during his stay in South Africa. Some of the stars forming in regions like NGC 3582 are much heavier than the Sun. These monster stars emit energy at prodigious rates and have very short lives that end in explosions as supernovae. The material ejected from these dramatic events creates bubbles in the surrounding gas and dust. This is the probable cause of the loops visible in this picture. This image was taken through multiple filters. From the Wide Field Imager, data taken through a red filter are shown in green and red, and data taken through a filter that isolates the red glow characteristic of hydrogen are also shown in red. Additional infrared data from the Digitized Sky Survey are shown in blue. The image was processed by ESO using the observational data identified by Joe DePasquale, from the United States [1], who participated in ESO's Hidden Treasures 2010 astrophotography competition [2]. The competition was organised by ESO in October-November 2010, for everyone who enjoys making beautiful images of the night sky using astronomical data obtained using professional telescopes. Notes [1] Joe searched through ESO's archive and identified datasets that he used to compose his

  17. Machining of Silicon-Ribbon-Forming Dies

    NASA Technical Reports Server (NTRS)

    Menna, A. A.

    1985-01-01

    Carbon extension for dies used in forming silicon ribbon crystals machined precisely with help of special tool. Die extension has edges beveled toward narrow flats at top, with slot precisely oriented and centered between flats and bevels. Cutting tool assembled from standard angle cutter and circular saw or saws. Angle cutters cuts bevels while slot saw cuts slot between them. In alternative version, custom-ground edges or additional circular saws also cut flats simultaneously.

  18. Thick film silicon growth techniques. [die materials

    NASA Technical Reports Server (NTRS)

    Bates, H. E.; Mlavsky, A. I.; Jewett, D. N.; White, V. E.

    1973-01-01

    The research which was directed toward finding an improved die material is reported. Wetting experiments were conducted with various materials to determine their compatibility with silicon. Work has also continued toward the development of quartz as a die material as new techniques have provided more optimistic results than observed in the past. As a result of the thermal modification previously described, improvements in growth stability have contributed to an increase in ribbon quality.

  19. Machining of Silicon-Ribbon-Forming Dies

    NASA Technical Reports Server (NTRS)

    Menna, A. A.

    1985-01-01

    Carbon extension for dies used in forming silicon ribbon crystals machined precisely with help of special tool. Die extension has edges beveled toward narrow flats at top, with slot precisely oriented and centered between flats and bevels. Cutting tool assembled from standard angle cutter and circular saw or saws. Angle cutters cuts bevels while slot saw cuts slot between them. In alternative version, custom-ground edges or additional circular saws also cut flats simultaneously.

  20. Is killing no worse than letting die?

    PubMed

    Nesbitt, W

    1995-01-01

    Those who wish to refute the view that it is worse to kill than to let die sometimes produce examples of cases in which an agent lets someone die but would be generally agreed to be no less reprehensible than if he had killed. It is argued that the examples produced typically possess a feature which makes their use in this context illegitimate, and that when modified to remove this feature, they provide support for the view which they were designed to undermine.

  1. Killing and letting die: hidden value assumptions.

    PubMed

    Atkinson, G

    1983-01-01

    In this paper I argue for several related theses: first, that the distinction between killing and letting die, as it is drawn by ordinary persons in ordinary contexts, is more complex than is generally understood; second, that the key feature of this complexity lies in the presence of a hidden normative component in what appears to be a straightforwardly descriptive distinction; and, third, that this complexity renders the killing/letting die distinction an inadequate and hazardous guide for moral reasoning.

  2. Synthesis and photoluminescence behavior of the Eu3+ ions as a nanocoating over a silica Stöber matrix.

    PubMed

    Rosa, Ieda L V; Oliveira, Larissa H; Longo, Elson; Varela, José A

    2011-05-01

    In this work, a SiO(2) spherical were prepared by the Stöber Method and then recovered with a single layer of Eu(2)O(3) oxide (SiO(2)@Eu(2)O(3)) obtained by the Polymeric Precursor Method. The SiO(2)@Eu(2)O(3) powder was heated treated at 100, 300, 400, 500 and 800 °C. The samples were characterized by the Scanning Electonic Microscopy (SEM), Thermal Analysis (TGA/DTA), and the luminescent properties of the SiO(2)@Eu(2)O(3) powders were studied by their emission and excitation spectra as well as by the lifetime measurements of the Eu(3+) (5)D(0) → (7)F(2) transition. The SEM analysis shows that the silica prepared by the Stöber Method is spherical with a particle size of 460 nm. The emission spectra of the SiO(2)@Eu(2)O(3) powders presented the Eu(3+) characteristics bands related to the (5)D(0) → (7)F(J) (J = 0, 1, 2, 3, 4) transitions at 577, 591, 616, 649 and 695 nm, respectively. The band related to the (5)D(0) → (7)F(2) transition is the most intense in the spectra, and its intensity decreases with the temperature enhancement. The decay curves of the SiO(2)@Eu(2)O(3) samples presented monoexponential features, and the obtained lifetime values were higher than the Eu(2)O(3) oxide. It was possible to conclude that the (5)D(0) → (7)F(2) hypersensitive transition is strongly dependent on the Eu(3+) surrounding. © Springer Science+Business Media, LLC 2010

  3. Stability of the major allergen Brazil nut 2S albumin (Ber e 1) to physiologically relevant in vitro gastrointestinal digestion.

    PubMed

    Moreno, F Javier; Mellon, Fred A; Wickham, Martin S J; Bottrill, Andrew R; Mills, E N Clare

    2005-01-01

    The major 2S albumin allergen from Brazil nuts, Ber e 1, was subjected to gastrointestinal digestion using a physiologically relevant in vitro model system either before or after heating (100 degrees C for 20 min). Whilst the albumin was cleaved into peptides, these were held together in a much larger structure even when digested by using a simulated phase 1 (gastric) followed by a phase 2 (duodenal) digestion system. Neither prior heating of Ber e 1 nor the presence of the physiological surfactant phosphatidylcholine affected the pattern of proteolysis. After 2 h of gastric digestion, approximately 25% of the allergen remained intact, approximately 50% corresponded to a large fragment of M(r) 6400, and the remainder comprised smaller peptides. During duodenal digestion, residual intact 2S albumin disappeared quickly, but a modified form of the 'large fragment' remained, even after 2 h of digestion, with a mass of approximately 5000 Da. The 'large fragment' comprised several smaller peptides that were identified, by using different MS techniques, as deriving from the large subunit. In particular, sequences corresponding to the hypervariable region (Q37-M47) and to another peptide (P42-P69), spanning the main immunoglobulin E epitope region of 2S albumin allergens, were found to be largely intact following phase 1 (gastric) digestion. They also contained previously identified putative T-cell epitopes. These findings indicate that the characteristic conserved skeleton of cysteine residues of 2S albumin family and, particularly, the intrachain disulphide bond pattern of the large subunit, play a critical role in holding the core protein structure together even after extensive proteolysis, and the resulting structures still contain potentially active B- and T-cell epitopes.

  4. Manufacture of die casting dies by hot isostatic pressing. CRADA final report

    SciTech Connect

    Viswanathan, S.; Ren, W.; Luk, K.; Brucher, H.G.

    1998-09-01

    The reason for this Cooperative Research and Development Agreement (CRADA) between the Oak Ridge National Laboratory (ORNL) and Doehler-Jarvis was to investigate the manufacture die-casting dies with internal water-cooling lines by hot-isostatic pressing (HIPing) of H13 tool steel powder. The use of HIPing will allow the near-net-shape manufacture of dies and the strategic placement of water-cooling lines during manufacture. The production of near-net-shape dies by HIPing involves the generation of HIPing diagrams, the design of the can that can be used for HIPing a die with complex details, strategic placement of water-cooling lines in the die, computer modeling to predict movement of the water lines during HIPing, and the development of strategies for placing water lines in the appropriate locations. The results presented include a literature review, particle analysis and characterization of H13 tool steel powder, and modeling of the HIPing process.

  5. Thermal Modelling In Pressure Die Casting

    NASA Astrophysics Data System (ADS)

    Rasgado, M. T. Alonso; Davey, K.; Watari, H.

    2004-06-01

    The pressure die casting process is cyclic and the temperature levels in the die are principally dictated by the total energy received from the casting. It is thus extremely important that any solidification model for the casting is able to predict energy extraction rates to a high degree of accuracy. In this paper an efficient three dimensional hybrid thermal model for the pressure die casting process is described. The finite element method (FEM) is used for modelling heat transfer in the casting, coupled to a boundary element (BE) model for the die. The FEM can efficiently account for the non-linearity introduced by the release of latent heat on solidification, whereas the BEM is ideally suited for modelling linear heat conduction in the die, as surface temperatures are of principal importance. The FE formulation for the casting is based on a control volume capacitance method, which is shown to provide high accuracy and stability. This method is similar to the apparent and effective heat capacitance methods, which are popular approaches used where conduction predominates over other heat transfer mechanisms. These methods involve the specification of element or nodal capacitances to accommodate for the release of latent heat. Unfortunately they suffer from a major drawback in that energy is not correctly transported through elements and so providing a source of inaccuracy. The control volume capacitance method allows for the transport of mass arising from volumetric shrinkage and ensures that energy is correctly transported. The BE model caters for surface phenomena such as boiling in the cooling channels, which is important, as this effectively controls the manner in which energy is extracted. The die temperature is decomposed into two components, one a steady-state part and the other a time-dependent perturbation. This approach enables the transient die temperatures to be calculated in an efficient way, since only die surfaces close to the die cavity are

  6. A comparison of the accuracy of three removable die systems and two die materials.

    PubMed

    Sivakumar, I; Mohan, J; Arunachalam, K S; Zankari, V

    2013-09-01

    The purpose of this study was to evaluate the dimensional shift of three commonly used die systems (Conventional system, Pindex system, Di-Lok tray system) with two commercially available type IV die stones (Ultra rock and Pearl stone). Under controlled conditions, ten casts, each with two removable dies, were constructed for each system for a total of 30 casts and 60 removable dies. Before and after sectioning measurements to within 0.01 mm in horizontal and vertical planes were recorded and differences calculated. Data were analyzed with 't' tests, one way analysis of variance and post hoc Tukey test. The results demonstrated that among the die systems compared, no single system was superior to the others in all respects. But among the die materials, dies poured in Pearl stone exhibited more dimensional changes than Ultra rock (p<0.05). Selection of die material is as critical as selection of any particular die system for successful fabrication of fixed partial denture and implant prosthesis.

  7. Assay of phenolic compounds from four species of Ber (Ziziphus mauritiana L.) Fruits: Comparision of three base hydrolysis procedure for quantification of total phenolic acids

    USDA-ARS?s Scientific Manuscript database

    The present study was undertaken to investigate the flavonoids profile in four species of ber (Ziziphus mauritiana Lamk) fruit and to compare various techniques for the analysis of total phenolic acids. The 12 flavonoids identified were quercetin 3-O-robinobioside, quercetin 3-O-rutinoside, querceti...

  8. Analytical Evaluation of the Effect of Cross-Polarization-induced Crosstalk on the BER Performance of a PDM-QPSK Coherent Homodyne Optical Transmission System

    NASA Astrophysics Data System (ADS)

    Taher, K. A.; Majumder, S. P.

    2017-05-01

    An analytical approach is developed to find the effect of cross-polarization (XPol)-induced crosstalk on the bit error rate (BER) performance of a polarization division multiplex (PDM) quadrature phase shift keying (QPSK) optical transmission system with polarization diversity receiver. Analytical expression for the XPol-induced crosstalk and signal to crosstalk plus noise ratio (SCNR) are developed at the output of polarization diversity PDM-QPSK coherent optical homodyne receiver conditioned on a given value of mean misalignment angle. Considering Maxwellian distribution for the pdf of the misalignment angle, the average SCNR and average BER are derived. Results show that there is significant deterioration in the BER performance and power penalty due to XPol-induced crosstalk. Penalties in signal power are found to be 8.85 dB, 11.28 dB and 12.59 dB correspondingly for LO laser power of -10 dBm, -5 dBm and 0 dBm at a data rate of 100 Gbps, mean misalignment angle of 7.5 degree and BER of 10-9 compared to the signal power without crosstalk.

  9. A CBPR Partnership Increases HIV Testing among Men Who Have Sex with Men (MSM): Outcome Findings from a Pilot Test of the "CyBER/Testing" Internet Intervention

    ERIC Educational Resources Information Center

    Rhodes, Scott D.; Vissman, Aaron T.; Stowers, Jason; Miller, Cindy; McCoy, Thomas P.; Hergenrather, Kenneth C.; Wilkin, Aimee M.; Reece, Michael; Bachmann, Laura H.; Ore, Addison; Ross, Michael W.; Hendrix, Ellen; Eng, Eugenia

    2011-01-01

    The Internet has emerged as an important tool for the delivery of health promotion and disease prevention interventions. Our community-based participatory research (CBPR) partnership developed and piloted "CyBER/testing", a culturally congruent intervention designed to promote HIV testing among men who have sex with men (MSM) within existing…

  10. Ethical challenges when caring for dying children.

    PubMed

    Furingsten, Lovisa; Sjögren, Reet; Forsner, Maria

    2015-03-01

    Caring for dying children presents special challenges, according to the children themselves, their relatives and healthcare professionals. The aim of this study was to describe caring as represented in healthcare workers' experiences of caring for dying children. A phenomenological approach was chosen, in-depth interviews were carried out and data were analysed in four steps focusing on (a) open reading, (b) meaning units, (c) constituents and (d) essence. Four nurses in a general acute paediatric care setting in Sweden participated after providing written informed consent. Voluntary participation and confidentiality were ensured, and the study was ethically approved. The essence of caring for dying children was likened to a musically attuned composition, comprising five constituents: presence, self-knowledge, injustice in dying, own suffering and in need of others. Presence was found to be a prerequisite for caring when a child is dying. Self-knowledge and support from others can be of help when struggling with emotional pain and injustice. Caring for dying children has been found to be a delicate task for healthcare workers all over the world, and the ethical dimension is emphasized in international research. In this study, emotional pain and suffering accompanied caring, but an atmosphere in which it is possible to give and get support from colleagues and to have time to grieve and time to focus on the patient's needs may ease the burden, as can having time to process thoughts about life and death, and a possibility to grow in self-knowledge. Caring in ethically demanding situations may be facilitated through presence, atmosphere, self-knowledge and time. The challenge does not demand highly technological solutions; these assets are readily available, no matter where on earth. However, there is a need to further investigate these prerequisites for caring, particularly when a child is dying. © The Author(s) 2014.

  11. Revision of the stiletto fly genera Acupalpa Kröber and Pipinnipons Winterton (Diptera, Therevidae, Agapophytinae) using cybertaxonomic methods, with a key to Australasian genera.

    PubMed

    Winterton, Shaun L

    2011-05-04

    Australian stiletto flies of the sister-genera Acupalpa Kröber, 1912 and Pipinnipons Winterton, 2001 (Diptera: Therevidae: Agapophytinae) are revised. Twelve new species of Acupalpa are described, while Acupalpa imitans (White, 1915), comb. n. is transferred from Pipinnipons and Acupalpa albimanis (Kröber, 1914), comb. n. is transferred from Ectinorhynchus Macquart as a senior synonym of Acupalpa pollinosa Mann. The total number of species of Acupalpa is therefore increased to 19: Acupalpa albimanis (Kröber), comb. n., Acupalpa albitarsa Mann, Acupalpa bohartisp. n., Acupalpa divisa (Walker), Acupalpa dolichorhynchasp. n., Acupalpa glossasp. n., Acupalpa imitans (White), comb. n., Acupalpa irwini Winterton, Acupalpa melanophaeossp. n.,Acupalpa miaboolyasp. n., Acupalpa minutasp. n., Acupalpa minutoidessp. n., Acupalpa notomelassp. n., Acupalpa novayamarnasp. n., Acupalpa rostrata Kröber, Acupalpa semirufa Mann, Acupalpa westralicasp. n., Acupalpa yalgoosp. n. and Acupalpa yanchepsp. n. Three new species of Pipinnipons are described, increasing the total number of species to five: Pipinnipons chauncyvallissp. n., Pipinnipons fascipennis (Kröber), Pipinnipons kampmeieraesp. n., Pipinnipons kroeberi Winterton, and P. sphecodasp. n.Pipinnipons and Acupalpa are rediagnosed in light of the new species presented herein and revised keys to species are included. A dichotomous key to genera of Australasian Therevidae is included. As an empirical example of cybertaxonomy, taxonomic descriptions were composed using a character matrix developed in Lucid Builder (in Structured Descriptive Data (SDD) format) to generate natural language descriptions supplemented by online specimen and image databases. Web resources are provided throughout the document including: a) links to high resolution colour images of all species on Morphbank, b) registration of authors, publications, taxon names and other nomenclatural acts in Zoobank, with assignment of Life Science Identifiers (LSIDs

  12. Revision of the stiletto fly genera Acupalpa Kröber and Pipinnipons Winterton (Diptera, Therevidae, Agapophytinae) using cybertaxonomic methods, with a key to Australasian genera

    PubMed Central

    Winterton, Shaun L.

    2011-01-01

    Abstract Australian stiletto flies of the sister-genera Acupalpa Kröber, 1912 and Pipinnipons Winterton, 2001 (Diptera: Therevidae: Agapophytinae) are revised. Twelve new species of Acupalpa are described, while Acupalpa imitans (White, 1915), comb. n. is transferred from Pipinnipons and Acupalpa albimanis (Kröber, 1914), comb. n. is transferred from Ectinorhynchus Macquart as a senior synonym of Acupalpa pollinosa Mann. The total number of species of Acupalpa is therefore increased to 19: Acupalpa albimanis (Kröber), comb. n., Acupalpa albitarsa Mann, Acupalpa boharti sp. n., Acupalpa divisa (Walker), Acupalpa dolichorhyncha sp. n., Acupalpa glossa sp. n., Acupalpa imitans (White), comb. n., Acupalpa irwini Winterton, Acupalpa melanophaeos sp. n., Acupalpa miaboolya sp. n., Acupalpa minuta sp. n., Acupalpa minutoides sp. n., Acupalpa notomelas sp. n., Acupalpa novayamarna sp. n., Acupalpa rostrata Kröber, Acupalpa semirufa Mann, Acupalpa westralica sp. n., Acupalpa yalgoo sp. n. and Acupalpa yanchep sp. n. Three new species of Pipinnipons are described, increasing the total number of species to five: Pipinnipons chauncyvallis sp. n., Pipinnipons fascipennis (Kröber), Pipinnipons kampmeierae sp. n., Pipinnipons kroeberi Winterton, and P. sphecoda sp. n. Pipinnipons and Acupalpa are rediagnosed in light of the new species presented herein and revised keys to species are included. A dichotomous key to genera of Australasian Therevidae is included. As an empirical example of cybertaxonomy, taxonomic descriptions were composed using a character matrix developed in Lucid Builder (in Structured Descriptive Data (SDD) format) to generate natural language descriptions supplemented by online specimen and image databases. Web resources are provided throughout the document including: a) links to high resolution colour images of all species on Morphbank, b) registration of authors, publications, taxon names and other nomenclatural acts in Zoobank, with assignment of Life

  13. Compassionate community networks: supporting home dying.

    PubMed

    Abel, Julian; Bowra, Jon; Walter, Tony; Howarth, Glennys

    2011-09-01

    How may communities be mobilised to help someone dying at home? This conceptual article outlines the thinking behind an innovative compassionate community project being developed at Weston-super-Mare, UK. In this project, a health professional mentors the dying person and their carer to identify and match: (a) the tasks that need to be done and (b) the members of their social network who might help with these tasks. Network members may subsequently join a local volunteer force to assist others who are network poor. Performing practical tasks may be more acceptable to some family, friends and neighbours than having to engage in a conversation about dying, and provides a familiarity with dying that is often lacking in modern societies, so in this model, behavioural change precedes attitudinal change. The scheme rejects a service delivery model of care in favour of a community development model, but differs from community development schemes in which the mentor is a volunteer rather than a health professional, and also from those approaches that strive to build community capacity before any one individual dying person is helped. The pros and cons of each approach are discussed. There is a need for evaluation of this and similar schemes, and for basic research into naturally occurring resource mobilisation at the end of life.

  14. Doktor Johannes Häringshauser - Was seine Bücher über ihn erzählen.

    NASA Astrophysics Data System (ADS)

    Feola, Vittoria

    2009-06-01

    Die Bibliothek des Dr. Johannes Häringshauser (1603-1642) weist ihren Besitzer als Arzt und Gelehrten mit großem geistigen Horizont aus. Hervorzuheben ist sein Interesse für Astronomie und Astrologie. Neben Werken, die unmittelbar mit seinen Studien in Wien und Padua und den Erfordernissen eines Arztes in Zusammenhang zu bringen sind (Klassiker der Heilkunde genauso wie aktuelle medizinische Publikationen), wird in seiner Büchersammlung eine reiche Palette an Themen abgedeckt: Theologie, Philosophie, Philologie, Politik, Geschichte und Länderkunde.

  15. Killing, letting die and moral perception.

    PubMed

    Gillett, Grant

    1994-10-01

    There are a number of arguments that purport to show, in general terms, that there is no difference between killing and letting die. These are used to justify active euthanasia on the basis of the reasons given for allowing patients to die. I argue that the general and abstract arguments fail to take account of the complex and particular situations which are found in the care of those with terminal illness. When in such situations, there are perceptions and intuitions available that do not easily find propositional form but lead most of those whose practice is in the care of the dying to resist active euthanasia. I make a plea for their intuitions to be heeded above the sterile voice of abstract premises and arguments by examining the completeness of the outline form of the pro-euthanasia argument. In doing so, I make use of Nussbaum's discussion of moral perception and general claims to be found in the literature of moral particularism.

  16. Acts and omissions, killing and letting die.

    PubMed

    Gillon, R

    1986-01-11

    Gillon asks what, if any, moral importance resides in the distinction between killing and letting die in the context of medical care. He considers and rejects the acts and omissions doctrine, which claims that actions (killing) resulting in some undesirable end are in general morally worse than failures to act (allowing to die) that have the same result. He also refutes the argument that the moral distinction between killing and letting die is one of harming versus benefitting, and that a physician has a responsibility not to harm (kill) a patient but no duty to help (keep alive). Gillon concludes by discussing the moral claims upon which the Roman Catholic rejection of the acts and omissions doctrine is based, which are the subjects of his next British Medical Journal article on medical ethics.

  17. The right to be allowed to die.

    PubMed

    Campbell, A G

    1983-09-01

    The unbridled use of modern medical skills and technology in preserving life at all costs has stimulated interest in expressing a 'right to die' by the legally competent patient who is anxious to protect his autonomy. Some recent decisions by American courts are seen to threaten this 'right to die' of competent patients and imply that legally incompetent patients including children should not have this right under any circumstances, even when expressed on their behalf by guardians, nearest relatives or parents. It is argued that this is contrary to 'natural justice' as viewed by most people. It should be possible to develop procedures which are protective of the basic 'right to life' of the incompetent yet will recognise circumstances where they could be allowed to die. This paper was presented at the 1983 annual conference of the London Medical Group, 'Human Rights in Medicine'.

  18. Is there a duty to die?

    PubMed

    Hardwig, J

    1997-01-01

    Many people were outraged when Richard Lamm claimed that old people had a duty to die. Modern medicine and an individualistic culture have seduced many to feel that they have a right to health care and a right to live, despite the burdens and costs to our families and society. But in fact there are circumstances when we have a duty to die. As modern medicine continues to save more of us from acute illness, it also delivers more of us over to chronic illnesses, allowing us to survive far longer than we can take care of ourselves. It may be that our technological sophistication coupled with a commitment to our loved ones generates a fairly widespread duty to die.

  19. Diagnosing dying: an integrative literature review.

    PubMed

    Kennedy, Catriona; Brooks-Young, Patricia; Brunton Gray, Carol; Larkin, Phil; Connolly, Michael; Wilde-Larsson, Bodil; Larsson, Maria; Smith, Tracy; Chater, Susie

    2014-09-01

    To ensure patients and families receive appropriate end-of-life care pathways and guidelines aim to inform clinical decision making. Ensuring appropriate outcomes through the use of these decision aids is dependent on timely use. Diagnosing dying is a complex clinical decision, and most of the available practice checklists relate to cancer. There is a need to review evidence to establish diagnostic indicators that death is imminent on the basis of need rather than a cancer diagnosis. To examine the evidence as to how patients are judged by clinicians as being in the final hours or days of life. Integrative literature review. Five electronic databases (2001-2011): Cochrane Central Register of Controlled Trials (CENTRAL) on The Cochrane Library, MEDLINE, EMBASE, PsycINFO and CINAHL. The search yielded a total of 576 hits, 331 titles and abstracts were screened, 42 papers were retrieved and reviewed and 23 articles were included. Analysis reveals an overarching theme of uncertainty in diagnosing dying and two subthemes: (1) 'characteristics of dying' involve dying trajectories that incorporate physical, social, spiritual and psychological decline towards death; (2) 'treatment orientation' where decision making related to diagnosing dying may remain focused towards biomedical interventions rather than systematic planning for end-of-life care. The findings of this review support the explicit recognition of 'uncertainty in diagnosing dying' and the need to work with and within this concept. Clinical decision making needs to allow for recovery where that potential exists, but equally there is the need to avoid futile interventions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  20. Ambiguities in 'killing' and 'letting die'.

    PubMed

    Atkinson, G M

    1983-05-01

    In a recent article Carla Kary (1980) attempts to show that there can be a significant moral difference between instances of killing and letting die. I shall maintain in Section I that Kary's argument is somewhat weakened by her failure to note an important ambiguity in the notion of killing a person. I shall also argue in Section II that a similar ambiguity affects the notion of letting someone die, and that failure to note this latter ambiguity also weakens the position developed by Robert Coburn (1980) with regard to defective newborns.

  1. Der Einfluss der Digitalisierung auf die Organisation eines Unternehmens

    NASA Astrophysics Data System (ADS)

    Walter, Wolfram M.

    Die Digitalisierung schreitet mit großen Schritten voran. Dies wirkt sich nicht nur auf die Gesellschaft im Grundsatz, sondern auch auf das Verhalten der Kunden aus. Neue Kommunikationswege beschleunigen die Interaktion zwischen Unternehmen und Verbraucher. Im Vergleich mit großen Internetfirmen werden etablierte Dienstleistungsunternehmen - vom Energieversorger bis zu Versicherungen - stark unter Druck gesetzt, sich noch intensiver mit dem Kundenservice auseinanderzusetzen. Dies wird nur möglich sein, wenn sich die Organisationen entsprechend positionieren und sich frühzeitig auf die Veränderungen einstellen. Hieraus ergeben sich mehr Chancen als Risiken, zumal es nicht nur neue Prozesse, sondern auch neue Berufsbilder geben wird.

  2. Effect of Die Strength and Work Piece Strength on the Wear of Hot Forging Dies

    NASA Astrophysics Data System (ADS)

    Levy, B. S.; Van Tyne, C. J.

    2015-01-01

    The effect of the strength ratio extracted from an Archard model for wear is used to describe the wear rates expected in hot forging dies. In the current study, the strength ratio is the strength of the hot forging die to the strength of the work piece. Three hot forging die steels are evaluated. The three die steels are FX, 2714, and WF. To determine the strength of the forging die, a continuous function has been developed that describes the yield strength of three die steels for temperatures from 600 to 700 °C and for times up to 20 h (i.e., tempering times of up to 20 h). The work piece material is assumed to be AISI 1045. Based on the analysis, the wear resistance of WF should be superior and FX should be slightly better than 2714. Decreasing the forging temperature increases the strength ratio, because the strength of the die surface increases faster than the flow strength of AISI 1045. The increase in the strength ratio indicates a decrease in the expected wear rate.

  3. Deformation properties of pharmaceutical excipients determined using an in-die and out-die method.

    PubMed

    Ilić, Ilija; Govedarica, Biljana; Šibanc, Rok; Dreu, Rok; Srčič, Stane

    2013-03-25

    This study investigated deformation mechanisms of some commonly used pharmaceutical fillers, such as microcrystalline cellulose, lactose, dicalcium phosphate, isomalt and cornstarch, using a combination of the in-die and out-die method with the Heckel and Walker models. The tableting mixtures contained of 98.5% (w/w) filler, the rest consisted of dry binder and an antiadhesive agent. Our results showed that plasticity and elasticity may be considered independent deformation properties as highly plastic materials (microcrystalline cellulose, cornstarch) also exhibited high elasticity. Particular emphasis was placed on explaining the differences observed between the in-die and out-die method-comparison revealed that the differences are a consequence of the material's elastic properties. Larger error of in-die results can be expected for more elastic materials, and thus in-die Heckel should be used with some considerations. In contrast, the Walker model was found to be more robust and smaller differences were observed between the two methods. We consider the most correct results to have been obtained by the out-die approach, which excludes the elastic properties of the material evaluated. An excellent correlation between elastic determination at the single-particle level and multiple-particle scale was demonstrated, suggesting a great potential of nanoscale determination of a material's mechanical properties for better elucidation of deformation mechanisms. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. Investigation of Die Stress Profiles during Powder Compaction using Instrumented Die

    SciTech Connect

    Hong, Sung-tae; Hovanski, Yuri; Lavender, Curt A.; Weil, K. Scott

    2008-06-01

    The radial stress profile in a cylindrical die during compaction of titanium (Ti) powder was investigated by experiments. The concept of an instrumented die was extended to design an enhanced instrumented die. Custom-made strain gage pins were used to measure the radial stress during powder compaction. The test fixture was designed to simulate double-action pressing. The measured die stress profile for Ti powder was compared with that for a commercially available iron (Fe) powder. The stress history shows that an appreciable residual stress remains in the die in the radial direction after the axial compaction stress is removed from the powder. Furthermore, the radial stress profile in the die, while under maximum axial compaction stress, is more uniform across the height of the Fe compact than that of the Ti compact. In addition, the residual stress profile in the die in the radial direction reduces symmetrically in both directions beyond the height of the compact for both powders. Finally, the Ti powder shows a significantly higher frictional coefficient at the maximum axial compaction stress, and consequently a higher maximum axial ejection stress than the Fe powder.

  5. Wissenschaft, die unsere Kultur verändert. Tiefenschichten des Streits um die Evolutionstheorie

    NASA Astrophysics Data System (ADS)

    Patzelt, Werner J.

    Die Evolutionstheorie ist eine der erfolgreichsten wissenschaftlichen Theorien. Sie erlaubt es, unsere Herkunft zu verstehen und riskante Merkmale gerade der menschlichen Spezies zu begreifen. Zugleich ist die Evolutionstheorie eine der umstrittensten Theorien. Das liegt nicht an ihrer empirischen Tragfähigkeit, sondern an ihrem Gegenstand. Sie handelt nämlich nicht nur - wie Hunderte andere wissenschaftliche Theorien - von der "Welt da draußen“, sondern vor allem auch von uns selbst und von unserem Platz in dieser Welt. Den einen gilt sie obendrein als Überwinderin religiösen Aberglaubens, den anderen als neuer Zugang zu Gott und seinem Wirken in der Welt. Ferner sehen die einen in der Evolution eine unbezweifelbare Tatsache gleich der Schwerkraft oder dem Holocaust, die anderen aber eine - noch oder dauerhaft - unbewiesene Hypothese oder gar eine falsche Schöpfungslehre. Und während die meisten Streitfragen solcher Art nach wechselseitig akzeptierten Regeln ‚normaler Wissenschaft‘ geklärt werden, wird bei der Frage nach dem Woher unserer Spezies und Kultur die intellektuelle Zuständigkeit von Wissenschaft mitunter überhaupt bezweifelt. Anscheinend geht es schon um recht tiefe Schichten unserer Kultur und nicht nur der wissenschaftlichen, wenn - wie seit 150 Jahren - um die Evolutionstheorie gestritten wird. Wie sehen diese Schichten aus?

  6. Participation of BER and NER pathways in the repair of DNA lesions induced at low N-nitrosodiethylamine concentrations.

    PubMed

    Aiub, Claudia Alessandra Fortes; Mazzei, José Luiz; Pinto, Luis Felipe Ribeiro; Felzenszwalb, Israel

    2004-12-01

    In the present work, we evaluated (p < 0.05) the participation of base excision repair (BER) and nucleotide excision repair (NER) mechanisms in repairing DNA lesions induced by N-nitrosodiethylamine (NDEA) at 1.5 ng/mL-36.5 microg/mL, through cell survival, in different single and double Escherichia coli DNA repair mutants (uvrA, uvrB, uvrC, fpg, nth, xthA, fpg/nth, uvrA/fpg, fpg/xthA, mutY, and fpg/mutY), using pre-incubation periods of 90 min. Mutant strains BH20 (fpg) and AB1886 (uvrA) showed microsomal enzyme (S9 mix) independent NDEA cytotoxicity. Cytotoxicity was also detected at lowest NDEA concentrations, in the presence of S9 mix, with strains BH980 (mutY) and BH990 (fpg/mutY). NDEA cytotoxicity, without S9 mix, was detected for mutant strains AB1884 (uvrC) and AB1885 (uvrB). Through SOS chromotest with 90 min of pre-incubation for uvrA and nth strains, only NER was shown to be required for repairing NDEA-induced lesions with or without metabolic activation. PQ37 and PQ66 strains, both uvrA mutants, showed different levels of NDEA sensitivity. The findings suggest that, under the used conditions, and at low concentrations, NDEA-induced lesions require both repair pathways.

  7. Synthesis of copper-containing bioactive glass nanoparticles using a modified Stöber method for biomedical applications.

    PubMed

    Zheng, Kai; Dai, Xinyi; Lu, Miao; Hüser, Norbert; Taccardi, Nicola; Boccaccini, Aldo R

    2017-02-01

    Copper (Cu)-containing bioactive glasses (BGs) are attracting attention for bone regeneration and wound healing since they have bone-bonding capability and potential osteogenesis and angiogenesis properties. In this study, highly dispersed and spherical Cu-containing bioactive glass nanoparticles (Cu-BGNs) were successfully synthesized via a modified Stöber method. The content of incorporated Cu in the particles could be tailored by adjusting the amount of the added Cu precursor, a procedure that had no significant effects on the morphological and structural characteristics of the nanoparticles. Cu-BGNs exhibited satisfactory apatite-forming ability, as a large quantity of apatite could form on Cu-BGNs pellets after immersion in simulated body fluid for just 3days. The incorporation of Cu exhibited positive effects on the apatite formation. In addition, both Si and Cu ions were released from the Cu-BGN in a sustained manner for at least 14days in cell culture medium, indicating the potential of the BGN as promising carriers for delivering therapeutic Cu ions. Moreover, Cu-BGNs showed no significant cytotoxicity towards human mesenchymal stem cells and fibroblast cells at concentrations of 100, 10 and 1μg/mL. Taken together, the results suggest that Cu-BGNs are promising nanoparticulate fillers to develop nanocomposites for biomedical applications especially in bone regeneration and wound healing. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. A Dying Star in a Different Light

    NASA Image and Video Library

    2010-11-17

    This image composite shows two views of a puffy, dying star, or planetary nebula, known as NGC 1514. At left is a view from a ground-based, visible-light telescope; the view on the right shows the object in infrared light from NASA WISE telescope.

  9. Mold Die Making. 439-322/324.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on mold die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 10 units in this guide: (1) introduction to Electrical Discharge Machining (EDM); (2) EDM principles; (3) the single pulse; (4) EDM safety; (5) electrode material; (6) electrode…

  10. Expectation and Variation with a Virtual Die

    ERIC Educational Resources Information Center

    Watson, Jane; English, Lyn

    2015-01-01

    By the time students reach the middle years they have experienced many chance activities based on dice. Common among these are rolling one die to explore the relationship of frequency and theoretical probability, and rolling two dice and summing the outcomes to consider their probabilities. Although dice may be considered overused by some, the…

  11. The Hospice: Advocate for the Dying.

    ERIC Educational Resources Information Center

    Anspaugh, David J.

    1978-01-01

    The hospice philosophy seeks to meet the needs of dying patients and their families. These needs include: effective control of pain; to be loved and to alleviate loneliness; to retain dignity and maintain control of as many aspects of life as possible; and to help the family be supportive and adapt to their inevitable loss. (JMF)

  12. The Onion and "When Legends Die."

    ERIC Educational Resources Information Center

    Bell, Loren C.

    1984-01-01

    Describes the eight layers in Thomas Black Bull's ("When the Legends Die") journey to spiritual rebirth and stresses that students can easily identify these layers and can thereby achieve a clearer understanding of the relationship between structure and meaning in fiction. (CRH)

  13. Counseling Older Persons: Careers, Retirement, Dying.

    ERIC Educational Resources Information Center

    Sinick, Daniel

    The focus of this monograph is on three areas of counseling with older clients: career counseling, retirement counseling, and counseling regarding death and dying. The portion on career counseling includes reasons older persons change careers, obstacles they are likely to face when seeking employment, myths surrounding the employability of older…

  14. Ceramic for Silicon-Shaping Dies

    NASA Technical Reports Server (NTRS)

    Sekercioglu, I.; Wills, R. R.

    1982-01-01

    Silicon beryllium oxynitride (SiBON) is a promising candidate material for manufacture of shaping dies used in fabricating ribbons or sheets of silicon. It is extremely stable, resists thermal shock, and has excellent resistance to molten silicon. SiBON is a solid solution of beryllium silicate in beta-silicon nitride.

  15. Asymmetric Die Grows Purer Silicon Ribbon

    NASA Technical Reports Server (NTRS)

    Kalejs, J. P.; Chalmers, B.; Surek, T.

    1983-01-01

    Concentration of carbide impurities in silicon ribbon is reduced by growing crystalline ribbon with die one wall higher than other. Height difference controls shape of meniscus at liquid/crystal interface and concentrates silicon carbide impurity near one of broad faces. Opposite face is left with above-average purity. Significantly improves efficiency of solar cells made from ribbon.

  16. Care of the Dying: A Swedish Perspective

    ERIC Educational Resources Information Center

    Feigenberg, Loma; Fulton, Robert

    1977-01-01

    This article illustrates various aspects of terminal care, and shows that rules and norms for such care do not exist today. The authors advocate the formulation of an aim for humane treatment of dying patients, and its application in a manner appropriate to Swedish medical concepts and Swedish conditions. (Author)

  17. Continuing Education on Dying and Death.

    ERIC Educational Resources Information Center

    Chodil, Judith J.; Dulaney, Peggy E.

    1984-01-01

    "Dying and Death in Critical Care Practice" was a one-day continuing education offering designed for registered nurses who practiced in settings such as emergency rooms, intensive care units, coronary care units, and operating rooms. The workshop was part of a continuing education curriculum in critical care nursing. (SSH)

  18. Care of the Dying: A Swedish Perspective

    ERIC Educational Resources Information Center

    Feigenberg, Loma; Fulton, Robert

    1977-01-01

    This article illustrates various aspects of terminal care, and shows that rules and norms for such care do not exist today. The authors advocate the formulation of an aim for humane treatment of dying patients, and its application in a manner appropriate to Swedish medical concepts and Swedish conditions. (Author)

  19. Stamping Die Making. 439-318/320.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  20. The Onion and "When Legends Die."

    ERIC Educational Resources Information Center

    Bell, Loren C.

    1984-01-01

    Describes the eight layers in Thomas Black Bull's ("When the Legends Die") journey to spiritual rebirth and stresses that students can easily identify these layers and can thereby achieve a clearer understanding of the relationship between structure and meaning in fiction. (CRH)

  1. Expectation and Variation with a Virtual Die

    ERIC Educational Resources Information Center

    Watson, Jane; English, Lyn

    2015-01-01

    By the time students reach the middle years they have experienced many chance activities based on dice. Common among these are rolling one die to explore the relationship of frequency and theoretical probability, and rolling two dice and summing the outcomes to consider their probabilities. Although dice may be considered overused by some, the…

  2. The Academic Study of Death and Dying.

    ERIC Educational Resources Information Center

    Amend, Edward W.

    The current study of death and dying is an example of constant change and development in academic disciplines. While the discussion of death in time of crisis is hard, if not impossible, youthful undergraduates find this topic to be of considerable interest. For them, a course can be organized effectively as a small and intimate seminar, which…

  3. Death and Dying in Young Adult Fiction.

    ERIC Educational Resources Information Center

    Harvey, Carolyn; Dowd, Frances S.

    1993-01-01

    Reports on a content analysis study of 25 novels about youth facing death and dying to determine whether death and grieving are realistically portrayed in young adult literature. Describes the evaluative instruments developed and discusses findings, concluding that young people can be informed and comforted by these realistic novels. (38…

  4. Teaching Humane Care for Dying Patients.

    ERIC Educational Resources Information Center

    Lev, Elise L.

    1986-01-01

    Describes an elective, upper-level course on caring for terminally ill patients, designed for baccalaureate nursing students. Discusses the hospice concept and its background, course design, communication with dying patients and their families, and outcomes of the course as measured by a pretest and two posttests. (CH)

  5. A profile of silicosis cases who died.

    PubMed

    Phoon, W H

    1982-01-01

    Silicosis cases which had been notified by doctors and confirmed after investigations were followed up by the Industrial Health Division. Up to August 1981, a total of 313 persons were confirmed as having the disease. Of these, 59 had died. The majority of these 59 persons had had their silica exposure in the granite quarries. 13 had been exposed to "rubber powder" which contained a high percentage of free silica. 52 of those who died were male, and their average age at death was 60.87 years. This did not appear to be significantly shorter than their life expectancy of 65.1 years. But the average age of death for the 7 women was 58.86 years, which was much shorter than their life expectancy of 70 years. Many of the men died from causes unrelated to silicosis. But 6 of the 7 women had progressive massive fibrosis (PMF) and they apparently died of the disease or complications arising from it.

  6. Constructing Death: Three Pathographies about Dying.

    ERIC Educational Resources Information Center

    Hawkins, Anne Hunsaker

    1991-01-01

    Discusses three pathographies as models for the "good death." In each, the author organizes the phenomena associated with the illness and death of a spouse from cancer into a coherent pattern. The result is three different paradigms of the experience of dying: "ritual death,""victorious death," and "one's own death." (Author/LLL)

  7. Die Baukastensystematik in der Fördertechnik

    NASA Astrophysics Data System (ADS)

    Sebulke, Johannes

    In der Fördertechnik wird kaum ein größerer Einsatzfall so dem anderen gleichen, dass man zwei Anlagen nach denselben Zeichnungen fertigen kann. Konstruktionszeiten, Rüst- und Umstellungszeiten der Fertigung sind hoch; der Kunde muss bei Einzelanfertigung lange Lieferzeiten in Kauf nehmen. In der Fördertechnik haben sich daher Baukastenprinzip, Standardisierung und die Konstruktion von Erzeugnisreihen weitgehend durchgesetzt.

  8. March of Asteroids Across Dying Star

    NASA Image and Video Library

    2013-12-12

    A dying star, called the Helix nebula, is shown surrounded by the tracks of asteroids in an image captured by NASA WISE. Skirting around the edges of the Helix nebula are the footprints of asteroids marching across the field of view.

  9. Stamping Die Making. 439-318/320.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  10. The Academic Study of Death and Dying.

    ERIC Educational Resources Information Center

    Amend, Edward W.

    The current study of death and dying is an example of constant change and development in academic disciplines. While the discussion of death in time of crisis is hard, if not impossible, youthful undergraduates find this topic to be of considerable interest. For them, a course can be organized effectively as a small and intimate seminar, which…

  11. Asymmetric Die Grows Purer Silicon Ribbon

    NASA Technical Reports Server (NTRS)

    Kalejs, J. P.; Chalmers, B.; Surek, T.

    1983-01-01

    Concentration of carbide impurities in silicon ribbon is reduced by growing crystalline ribbon with die one wall higher than other. Height difference controls shape of meniscus at liquid/crystal interface and concentrates silicon carbide impurity near one of broad faces. Opposite face is left with above-average purity. Significantly improves efficiency of solar cells made from ribbon.

  12. Ceramic for Silicon-Shaping Dies

    NASA Technical Reports Server (NTRS)

    Sekercioglu, I.; Wills, R. R.

    1982-01-01

    Silicon beryllium oxynitride (SiBON) is a promising candidate material for manufacture of shaping dies used in fabricating ribbons or sheets of silicon. It is extremely stable, resists thermal shock, and has excellent resistance to molten silicon. SiBON is a solid solution of beryllium silicate in beta-silicon nitride.

  13. A moral dilemma: killing and letting die.

    PubMed

    Johnson, K

    Most health care professionals believe that there is a clear difference between killing and letting die, i.e. between active and passive euthanasia. Philosophers, however, have repeatedly attacked the moral validity of their argument. This article explores various related issues and theoretical approaches to the distinction between acts and omissions.

  14. A moral dilemma: killing and letting die.

    PubMed

    Johnson, Kath

    1993-06-24

    Most health care professionals believe that there is a clear difference between killing and letting die, i.e. between active and passive euthanasia. Philosophers, however, have repeatedly attacked the moral validity of their argument. This article explores various related issues and theoretical approaches to the distinction between acts and omissions.

  15. Mold Die Making. 439-322/324.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on mold die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 10 units in this guide: (1) introduction to Electrical Discharge Machining (EDM); (2) EDM principles; (3) the single pulse; (4) EDM safety; (5) electrode material; (6) electrode…

  16. Porcelain shoulder adaptation using direct refractory dies.

    PubMed

    Schneider, D M; Levi, M S; Mori, D F

    1976-11-01

    Eleven direct refractory dies were made from separate polysulfide rubber impressions of two Dentoform teeth which had been prepared for porcelain-fused-to-gold veneer crowns with labial porcelain shoulders. Porcelain veneer crowns were built and fired directly on the dies, following the manufacturer's instructions and using a common laboratory technique. The finished crowns were seated on the Dentoform teeth, and the porcelain-tooth adaptation was measured with a micrometer eyepiece in a dissecting microscope. In general, the study indicated that by use of a direct refractory die, the porcelain adaptation of an average porcelain shoulder veneer crown could be made to fall within the tolerances of a clinically acceptable gold margin (39 mu).21 The crown could likewise be made to adapt closer than the normal thickness of cement film may allow (20 to 40 mu).22 However the adaptation of many crowns was more uneven than the above statements would tend to indicate. The study also showed that with great care and a limited number of firings, margins of a lesser thickness than a piece of 0.001 inch (25.4 mu) platinum foil could be attained. There appears to be promise in the use of a direct refractory die material. However, more studies are needed to overcome some of the problems in the technique described.

  17. Wie LCC-Management die Produktionstechnik und die Instandhaltung verändert

    NASA Astrophysics Data System (ADS)

    Zick, Manfred

    Die zunehmende Komplexität von Produktionsanlagen und deren steigende Investitionssummen erfordern eine intensive Nutzung und überschaubare Folgekosten, zum Beispiel in der Instandhaltung. Um diese Ziele beim Investitionsvorgang von Anlagen effizienter als in der Vergangenheit zu gestalten sind Organisationsverfahren wie Life Cycle Cost Management (LCC-Management) bzw. Total Cost of Ownership (TCO) sinnvoll. Dieser Beitrag zeigt, wie Hersteller und Betreiber bis heute mit diesen Verfahren die Auslegung und das Betriebsverhalten von Anlagen entwickeln, deren reduzierten Instandhaltungsaufwand prognostizieren und die Leistungen zum Vorteil beider Vertragspartner steigern.

  18. Dying other, dying self: creating culture and meaning in palliative healthcare.

    PubMed

    McCann, Christopher J; Adames, Hector Y

    2013-08-01

    Dying is an act of creativity, and we each die as cultural beings. Culture helps us create the meaning death requests of us. However, the dominant culture of the healthcare system views death as a failure of modern medicine, an event of unspeakable terror and taboo. Palliative clinicians must honor each dying person's cultural identity (as well as the person's family), not subject it to the dominant discourse of Western medicine. This article offers practical guidelines for palliative clinicians to do so, as well as a case vignette.

  19. BER performance of MSK in ground-to-satellite uplink optical communication under the influence of atmospheric turbulence and detector noise.

    PubMed

    Ding, Jiachen; Li, Mi; Tang, Minghui; Li, Yan; Song, Yuejiang

    2013-09-15

    Minimum shift keying (MSK) has been widely used in fiber optical communication and free-space optical communication. In order to introduce MSK into satellite laser communication, the bit-error rate (BER) performance of the MSK scheme is investigated in uplink communications under the influence of atmospheric turbulence consisting of weak fluctuation and beam wander. Numerical results indicate that the BER performance of MSK is much better than the performance of on-off keying (OOK). With the laser power being 4 W, the improvement is 5 dB in coherent demodulation and 15 dB in delay coherent demodulation. Furthermore, compared with OOK, optimal values of the divergence angle, receiver diameter, and transmitter beam radius are easier and more practical to achieve in the MSK scheme. The work can benefit ground-to-satellite laser uplink communication system design.

  20. Participation of stress-inducible systems and enzymes involved in BER and NER in the protection of Escherichia coli against cumene hydroperoxide.

    PubMed

    Asad, L M; Medeiros, D C; Felzenszwalb, I; Leitão, A C; Asad, N R

    2000-09-15

    We studied the participation of the stress-inducible systems, as the OxyR, SoxRS and SOS regulons in the protection of Escherichia coli cells against lethal effects of cumene hydroperoxide (CHP). Moreover, we evaluated the participation of BER and NER in the repair of the DNA damage produced by CHP. Our results suggest that the hypersensitivity observed in the oxyR mutants to the lethal effect of CHP does not appear to be due to SOS inducing DNA lesions, but rather to cell membrane damage. On the other hand, DNA damage induced by CHP appears to be repaired by enzymes involved in BER and NER pathways. In this case, Fpg protein and UvrABC complex could be involved cooperatively in the elimination of a specific DNA lesion. Finally, we have detected the requirement for the uvrA gene function in SOS induction by CHP treatment.

  1. A monocyte/macrophage antigen recognized by the four antibodies GHI/61, Ber-MAC3, Ki-M8 and SM4.

    PubMed Central

    Pulford, K; Micklem, K; McCarthy, S; Cordell, J; Jones, M; Mason, D Y

    1992-01-01

    A new monoclonal antibody, GHI/61, which labels the majority of monocytes and tissue macrophages is described. This antibody recognizes an intracellular antigen of 130,000 MW (reduced) and 110,000 MW (unreduced). Using biochemical, flow cytometry and immunocytochemical studies antibody GHI/61 was shown to recognize the same antigen as the previously described antibodies Ber-MAC3, Ki-M8 and SM4. On the basis of the results obtained, antibodies GHI/61, SM4, Ber-MAC3 and Ki-M8 should form a new CD group at the next Leucocyte Typing Workshop. Since the antigen recognized by the antibody GHI/61 is relatively easy to purify, the sequencing and the isolation of the gene encoding this protein should be possible. Images Figure 3 Figure 1 PMID:1592433

  2. Graphene oxide nanosheets induce DNA damage and activate the base excision repair (BER) signaling pathway both in vitro and in vivo.

    PubMed

    Lu, Chun-Jiao; Jiang, Xue-Feng; Junaid, Muhammad; Ma, Yan-Bo; Jia, Pan-Pan; Wang, Hua-Bin; Pei, De-Sheng

    2017-10-01

    Graphene oxide (GO) has widespread concerns in the fields of biological sciences and medical applications. Currently, studies have reported that excessive GO exposure can cause cellular DNA damage through reactive oxygen species (ROS) generation. However, DNA damage mediated response of the base excision repair (BER) pathway due to GO exposure is not elucidated yet. Therefore, we exposed HEK293T cells and zebrafish embryos to different concentrations of GO for 24 h, and transcriptional profiles of BER pathway genes, DNA damage, and cell viability were analyzed both in vitro and in vivo. Moreover, the deformation of HEK293T cells before and after GO exposure was also investigated using atomic force microscopy (AFM) to identify the physical changes occurred in the cells' structure. CCK-8 and Comet assay revealed the significant decrease in cell viability and increase in DNA damage in HEK293T cells at higher GO doses (25 and 50 μg/mL). Among the investigated genetic markers in HEK293T cells, BER pathway genes (APEX1, OGG1, CREB1, UNG) were significantly up-regulated upon exposure to higher GO dose (50 μg/mL), however, low exposure concentration (5, 25 μg/mL) failed to induce significant genetic induction except for CREB1 at 25 μg/mL. Additionally, the viscosity of HEK293T cells decreased upon GO exposure. In zebrafish, the results of up-regulated gene expressions (apex1, ogg1, polb, creb1) were consistent with those in the HEK293T cells. Taken all together, the exposure to elevated GO concentration could cause DNA damage to HEK293T cells and zebrafish embryos; BER pathway could be proposed as the possible inner response mechanism. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Targeting BRCA1-BER deficient breast cancer by ATM or DNA-PKcs blockade either alone or in combination with cisplatin for personalized therapy.

    PubMed

    Albarakati, Nada; Abdel-Fatah, Tarek M A; Doherty, Rachel; Russell, Roslin; Agarwal, Devika; Moseley, Paul; Perry, Christina; Arora, Arvind; Alsubhi, Nouf; Seedhouse, Claire; Rakha, Emad A; Green, Andrew; Ball, Graham; Chan, Stephen; Caldas, Carlos; Ellis, Ian O; Madhusudan, Srinivasan

    2015-01-01

    BRCA1, a key factor in homologous recombination (HR) repair may also regulate base excision repair (BER). Targeting BRCA1-BER deficient cells by blockade of ATM and DNA-PKcs could be a promising strategy in breast cancer. We investigated BRCA1, XRCC1 and pol β protein expression in two cohorts (n = 1602 sporadic and n = 50 germ-line BRCA1 mutated) and mRNA expression in two cohorts (n = 1952 and n = 249). Artificial neural network analysis for BRCA1-DNA repair interacting genes was conducted in 249 tumours. Pre-clinically, BRCA1 proficient and deficient cells were DNA repair expression profiled and evaluated for synthetic lethality using ATM and DNA-PKcs inhibitors either alone or in combination with cisplatin. In human tumours, BRCA1 negativity was strongly associated with low XRCC1, and low pol β at mRNA and protein levels (p < 0.0001). In patients with BRCA1 negative tumours, low XRCC1 or low pol β expression was significantly associated with poor survival in univariate and multivariate analysis compared to high XRCC1 or high pol β expressing BRCA1 negative tumours (ps < 0.05). Pre-clinically, BRCA1 negative cancer cells exhibit low mRNA and low protein expression of XRCC1 and pol β. BRCA1-BER deficient cells were sensitive to ATM and DNA-PKcs inhibitor treatment either alone or in combination with cisplatin and synthetic lethality was evidenced by DNA double strand breaks accumulation, cell cycle arrest and apoptosis. We conclude that XRCC1 and pol β expression status in BRCA1 negative tumours may have prognostic significance. BRCA1-BER deficient cells could be targeted by ATM or DNA-PKcs inhibitors for personalized therapy. Copyright © 2014 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

  4. BerEp4, cytokeratin 14, and cytokeratin 17 immunohistochemical staining aid in differentiation of basaloid squamous cell carcinoma from basal cell carcinoma with squamous metaplasia.

    PubMed

    Linskey, Katy R; Gimbel, Devon C; Zukerberg, Lawrence R; Duncan, Lyn M; Sadow, Peter M; Nazarian, Rosalynn M

    2013-11-01

    Basaloid squamous cell carcinoma (bSCC) is an uncommon variant of squamous cell carcinoma, which may overlap histologically with basal cell carcinoma with squamous metaplasia (BCCm). To aid in the differentiation of these neoplasms using immunohistochemical staining because of the worse prognosis associated with bSCC. Using immunohistochemical techniques, we investigated BerEp4, cytokeratin 17 (CK17), and cytokeratin 14 (CK14) protein expression in 25 cases of bSCC (8 cutaneous [32%], 12 aerodigestive tract [48%], and 5 lymph node metastases [20%]) and 43 cases of BCCm (39 cutaneous [91%], and 4 metastases [9%]). An immunoreactivity score was assigned using the percentage of tumor cells staining and the pattern of expression. Interobserver agreement for 2 independent pathologists was assessed using a κ coefficient. The mean percentage of staining was significantly higher in BCCm, compared with bSCC (BerEp4, P = .006; CK17, P < .001; CK14, P < .001; unpaired t test), with 58% of BCCm cases (25 of 43) displaying diffuse staining for all markers, and nearly all (98%; 42 of 43) displaying diffuse staining for CK17 and CK14. In contrast, no bSCC cases (0%) displayed diffuse staining for all 3 markers, and only 8% (2 of 25) displayed diffuse staining for CK17 and CK14. High interobserver agreement was determined. BerEp4 alone is unreliable for differentiation between BCCm and bSCC, and the addition of either CK14 or CK17 will augment the sensitivity and negative predictive value of BerEp4 staining in BCCm and bSCC diagnosis.

  5. [Anguish about death and fear of dying, supportive care for the dying].

    PubMed

    Bouregba, A; Lebret, T

    2008-11-01

    During metastatic patient follow up, anguish about death is different from the fear of dying. In fact anguish is unconscious and associated with anxiety, on the other hand the fear of dying is a reaction to the threat of imminent death. Physical pain and isolation are factors that increase the pangs of death. The support of friends and family constitutes a real benefit for the treatment of patients during this period.

  6. The disulphide mapping, folding and characterisation of recombinant Ber e 1, an allergenic protein, and SFA8, two sulphur-rich 2S plant albumins.

    PubMed

    Alcocer, Marcos J C; Murtagh, Gareth J; Bailey, Kevin; Dumoulin, Mireille; Meseguer, Amparo Sarabia; Parker, Martin J; Archer, David B

    2002-11-15

    We have cloned and expressed genes encoding the allergenic brazil nut 2S albumin (Ber e 1) and the sunflower albumin 8 (SFA8) in the methylotrophic yeast Pichia pastoris. We show that both proteins were secreted at high levels and that the purified proteins were properly folded. We also showed that Ber e 1 is glycosylated during secretion and that the glycan does not interfere with the folding or immunoreactivity. The disulphide map of the Ber e 1 protein was experimentally established and is in agreement with the conserved disulphide structure of other members of the 2S albumin family. A model three-dimensional structure of the allergen was generated. During the expression studies and through mutation we have also shown that alteration of the sequences around the Kex2 endoproteolytic processing site in the expressed fusion protein can compromise the secretion by targeting part of the protein for possible degradation. The secreted production of these properly folded sulphur-rich plant albumins presents an opportunity to delineate the attributes that make an allergen and to facilitate the diagnosis and therapy of type I allergy.

  7. Architecture for on-die interconnect

    SciTech Connect

    Khare, Surhud; More, Ankit; Somasekhar, Dinesh; Dunning, David S.

    2016-03-15

    In an embodiment, an apparatus includes: a plurality of islands configured on a semiconductor die, each of the plurality of islands having a plurality of cores; and a plurality of network switches configured on the semiconductor die and each associated with one of the plurality of islands, where each network switch includes a plurality of output ports, a first set of the output ports are each to couple to the associated network switch of an island via a point-to-point interconnect and a second set of the output ports are each to couple to the associated network switches of a plurality of islands via a point-to-multipoint interconnect. Other embodiments are described and claimed.

  8. Spiritual aspects of death and dying.

    PubMed Central

    Mermann, A. C.

    1992-01-01

    Dying is an event beyond our comprehension, an experience that can only be imagined. Patients with cancer have a gift denied many others: some time to prepare for the approaching end of life. This time can be used to bring old conflicts to a close, to say goodbye and seek forgiveness from others, to express love and gratitude for the gifts of a life. Physicians can help patients by being aware of the spiritual dimensions to life that many patients have. In major religious traditions, death is accepted as the natural end of the gift of life and as a point of transition to another, yet unknown, existence. For many patients, it is not death that is feared, but abandonment. The physician's awareness of the spiritual needs of patients can make care of the dying more rewarding and fulfilling for all concerned. PMID:1519377

  9. Clayton's compromises and the assisted dying debate.

    PubMed

    Parker, Malcolm

    2015-03-01

    Richard Huxtable has recently argued that while assisted dying has been both repeatedly condemned and commended, a compromise resolution is possible. Following critique of other purported solutions, he argues for a new legal offence of "compassionate killing" as a plausible compromise between supporters and opponents of legalised assisted dying, because it offers something of significance to both sides. However, it turns out that "compassionate killing" would leave both sides with insufficient net benefit for the proposal to qualify as a compromise between them. By analogy with another apparently intractable bioethical debate, concerning destructive embryo research, this column rejects Huxtable's solution as another "Clayton's compromise". True compromise is not possible in bioethical debates involving divisions over deeply held values and world views. Resolving such debates inevitably involves the substitution of one dominant world view with another.

  10. Natural law and the "right to die".

    PubMed

    Whiting, R A

    Over the last two decades social concerns with the "right to die" have grown beyond the ability of our governmental and judicial institutions to consistently deal with them. One reason for this difficulty has been the unavailability of any legal or judicial standard that is consistent with American conceptions of liberty, morality, and justice. This article attempts to examine the theory of natural law to determine whether it may provide a consistent standard for resolving these difficult questions. As natural law theories are traced through history, they lead directly to the United States where a uniquely American interpretation became one of the foundational principles for our constitution. By applying these theories to the contemporary question of the "right to die," natural law can again provide the foundational principles needed to develop standards for dealing with such questions that are consistent with our historical, philosophical, and political traditions.

  11. [Assisted dying and conflict of interest].

    PubMed

    Hug, G

    1997-01-18

    A Swiss physician obtained his elderly patient's house, valued at $2 million, as a gift. The patient retained the right to stay in the house until her death. The physician also knew that she had made him the beneficiary of her estate, valued at + 10 million. She then died of untreated pneumonia while in his care. He had not discussed withholding of antibiotics with her or her family. In countries with advanced life-sustaining technology, 35% of all deaths are thought to occur after withholding of treatment. Physicians and others making such "MDEL" (medical decisions concerning the end of life) have a conflict of interest, if they benefit from their patients' death. These conflicts are unethical. They are dangerous to patients, physicians, the medical profession, and the public. The Netherlands have laws and rules of professional conduct that prohibit MDEL-for-profit, i.e., a mode of assisted dying that benefits caregivers to the detriment of patients and their families.

  12. [Sudden die-off of honeybee colonies].

    PubMed

    Muz, Mustafa N

    2008-01-01

    Apis mellifera is used for honeybee keeping all over Turkey. Recently, honeybees have been suddenly disappearing for no apparent reason. It is presumed that some viral and parasitic honeybee pathogens are responsible for this. No medical research has been conducted to determine the pathologic causes of the sudden die-off of the honeybee colonies in Turkey as yet. This is of urgent importance for future of the honeybee industry.

  13. Died of wounds: a mortality review.

    PubMed

    Keene, Damian Douglas; Penn-Barwell, J G; Wood, P R; Hunt, N; Delaney, R; Clasper, J; Russell, R J; Mahoney, P F

    2016-10-01

    Combat casualty care is a complex system involving multiple clinicians, medical interventions and casualty transfers. Improving the performance of this system requires examination of potential weaknesses. This study reviewed the cause and timing of death of casualties deemed to have died from their injuries after arriving at a medical treatment facility during the recent conflicts in Iraq and Afghanistan, in order to identify potential areas for improving outcomes. This was a retrospective review of all casualties who reached medical treatment facilities alive, but subsequently died from injuries sustained during combat operations in Afghanistan and Iraq. It included all deaths from start to completion of combat operations. The UK military joint theatre trauma registry was used to identify cases, and further data were collected from clinical notes, postmortem records and coroner's reports. There were 71 combat-related fatalities who survived to a medical treatment facility; 17 (24%) in Iraq and 54 (76%) in Afghanistan. Thirty eight (54%) died within the first 24 h. Thirty-three (47%) casualties died from isolated head injuries, a further 13 (18%) had unsurvivable head injuries but not in isolation. Haemorrhage following severe lower limb trauma, often in conjunction with abdominal and pelvic injuries, was the cause of a further 15 (21%) deaths. Severe head injury was the most common cause of death. Irrespective of available medical treatment, none of this group had salvageable injuries. Future emphasis should be placed in preventative strategies to protect the head against battlefield trauma. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  14. Public attitudes toward the right to die.

    PubMed Central

    Genuis, S J; Genuis, S K; Chang, W C

    1994-01-01

    OBJECTIVE: To determine public attitudes toward the right to die, euthanasia and related end-of-life decisions. DESIGN: Mail survey based on telephone numbers randomly selected by computer. SETTING: Edmonton. PARTICIPANTS: Of 1347 computer-generated, randomly selected telephone numbers called between February and June 1992, 902 individuals were reached, and 500 eligible contacts (55%) agreed to fill out the mailed questionnaire based on 12 vignettes involving end-of-life decisions. A total of 356 usable questionnaires (71%) were subsequently returned. MAIN OUTCOME MEASURES: Attitudes toward end-of-life decisions including withdrawal of life support, euthanasia, chronic suffering and the right to die, living wills and family involvement in decision making for incompetent individuals. Comments and demographic data were also solicited. RESULTS: Of the respondents 84% supported a family's right to withdraw life support from a patient in a persistent coma, and 90% supported a mentally competent patient's right to request that life support be withdrawn. Active euthanasia was supported by 65% for only patients experiencing severe pain and terminal illness. There was marked opposition to euthanasia for patients in other circumstances, such as an elderly disabled person who feels he or she is a burden on relatives (opposed by 65%), a patient with chronic depression resistant to treatment (by 75%) or an elderly person no longer satisfied with life and who has various minor physical ailments (by 83%). In all, 63% of the respondents felt that legalization of euthanasia for terminal illnesses would lead to euthanasia for many other, unsupported reasons, and 34% supported legislation to prohibit euthanasia in all situations. CONCLUSIONS: Public support for the right to die varies depending on the circumstances of the patient. The single most significant factor determining attitudes was the level of religious activity. The family's wishes were an important factor in end

  15. Diagnosing dying: an integrative literature review

    PubMed Central

    Kennedy, Catriona; Brooks-Young, Patricia; Brunton Gray, Carol; Larkin, Phil; Connolly, Michael; Wilde-Larsson, Bodil; Larsson, Maria; Smith, Tracy; Chater, Susie

    2014-01-01

    Background To ensure patients and families receive appropriate end-of-life care pathways and guidelines aim to inform clinical decision making. Ensuring appropriate outcomes through the use of these decision aids is dependent on timely use. Diagnosing dying is a complex clinical decision, and most of the available practice checklists relate to cancer. There is a need to review evidence to establish diagnostic indicators that death is imminent on the basis of need rather than a cancer diagnosis. Aim To examine the evidence as to how patients are judged by clinicians as being in the final hours or days of life. Design Integrative literature review. Data sources Five electronic databases (2001–2011): Cochrane Central Register of Controlled Trials (CENTRAL) on The Cochrane Library, MEDLINE, EMBASE, PsycINFO and CINAHL. The search yielded a total of 576 hits, 331 titles and abstracts were screened, 42 papers were retrieved and reviewed and 23 articles were included. Results Analysis reveals an overarching theme of uncertainty in diagnosing dying and two subthemes: (1) ‘characteristics of dying’ involve dying trajectories that incorporate physical, social, spiritual and psychological decline towards death; (2) ‘treatment orientation’ where decision making related to diagnosing dying may remain focused towards biomedical interventions rather than systematic planning for end-of-life care. Conclusions The findings of this review support the explicit recognition of ‘uncertainty in diagnosing dying’ and the need to work with and within this concept. Clinical decision making needs to allow for recovery where that potential exists, but equally there is the need to avoid futile interventions. PMID:24780536

  16. The hospice: Humane care for the dying.

    PubMed

    Franco, V W

    1983-09-01

    The hospice movement arose as a reaction to the dehumanizing atmosphere of acute-care hospitals, where excessive utilization of life support equipment deprived dying patients of a meaningful vision of their destiny. Respecting the spiritual quest of the terminally ill for wholeness and dignity, the hospice concept prescribes the rendering of compassionate and pastoral care by a benevolent community of family, health care staff, friends, and clergy. Approximately 800 hospice programs are currently evolving in the United States. St. Mary's (formerly "Hillhaven") Hospice in Tucson, Arizona, offers the most comprehensive program of services, including home care, inpatient care, and artistic media through which the dying express their creativity. Numerous demonstration projects funded by several government agencies, principally the Health Care Financing Administration (HCFA), are expected to result in the legislative actions eliminating barriers to reimbursement of the cost of hospice services by Medicare, Medicaid, and other third-party payers. Existential analysis reveals the value of religion and spiritual support in enabling the dying to banish anxiety and muster the hope requisite for fully appreciating the authentic meaning of their destiny.

  17. The hospice: Humane care for the dying.

    PubMed

    Franco, V W

    1985-03-01

    The hospice movement arose as a reaction to the dehumanizing atmosphere of acute-care hospitals, where excessive utilization of life support equipment deprived dying patients of a meaningful vision of their destiny. Respecting the spiritual quest of the terminally ill for wholeness and dignity, the hospice concept prescribes the rendering of compassionate and pastoral care by a benevolent community of family, health care staff, friends, and clergy. Approximately 800 hospice programs are currently evolving in the United States. St. Mary's (formerly "Hillhaven") Hospice in Tucson, Arizona, offers the most comprehensive program of services, including home care, inpatient care, and artistic media through which the dying express their creativity. Numerous demonstration projects funded by several government agencies, principally the Health Care Financing Administration (HCFA), are expected to result in legislative actions eliminating barriers to reimbursement of the cost of hospice services by Medicare, Medicaid, and other third-party payers. Existential analysis reveals the value of religion and spiritual support in enabling the dying to banish anxiety and muster the hope requisite for fully appreciating the authentic meaning of their destiny.

  18. Parents dying of cancer and their children.

    PubMed

    Beale, Estela A; Sivesind, Debra; Bruera, Eduardo

    2004-12-01

    We reviewed our experience with 28 consecutive children referred for assessment and intervention. These were the children of patients with terminal cancer referred to the Palliative Care and Symptom Control Service. In all cases the dying parent was a biological parent. Eleven parameters were assessed in each of 29 children and their incidence was calculated. The children and their parents were seen in a semistructured interview, together as well as separately. The parameters were: seeking reassurance (82), becoming a caretaker (79), inability to separate from parent (79), anger about feeling abandoned (68), despair (57), guilt (54), discipline problems, aggressive behavior (46), denial (39), blame of others (21), and fear for the child's own health (18). Our results suggest that children with dying parents manifest significant distress as well as a greater understanding of their parent's illness than is usually suspected. Timely intervention by a child psychiatrist or other mental health professional with proven competence in working with children can help children to better cope with the death and dying of their parent and ameliorate the process of bereavement following the parent's death. Because of our small sample, we cannot generalize about all of the findings. Further research is required to characterize the level of distress in the children and the long-term impact in their overall adjustment to life.

  19. Caring Science Conscious Dying: An Emerging Metaparadigm.

    PubMed

    Rosa, William; Estes, Tarron; Watson, Jean

    2017-01-01

    Caring science is an extant theory of human relationship, guiding the profession of nursing with the understanding and application of a moral-ethical praxis that promotes, protects, and provides human dignity throughout the life continuum. Over the past 30 or more years, caring science has transformed nursing by calling for a heightened ethical perspective of human dignity in how nurses practice, educate, research, and evolve the profession. Conscious dying is a framework rooted in a human caring ontology, which strives to deepen the nurse healer's awareness in tending to a patient's dying and death, returning death to its sacred place in the cycle of life. Reflective inventories are self-reflection tools that have been used to encourage nurses' personal growth and development and may be utilized in individual or group settings. The purpose herein is to introduce an emerging metaparadigm that links self to system, interweaving and integrating the teachings of caring science and conscious dying through the use of reflective inventories for both the individual nurse and collective of nursing.

  20. Killing, letting die, and withdrawing aid.

    PubMed

    McMahan, Jeff

    1993-01-01

    One of the aims of this article is to contribute to the identification of the empirical criteria governing the use of the concepts of killing and letting die. I will not attempt a comprehensive analysis of the concepts but will limit the inquiry to certain problematic cases -- namely, cases involving the removal or withdrawal of life-supporting aid or protection. The analysis of these cases will, however, shed light on the criteria for distinguishing killing and letting die in other cases as well. My overall aims in the article are partly constructive and partly skeptical. I hope to advance our understanding of the nature of the distinction between killing and letting die. This, I believe, will enable us to defend the moral relevance of the distinction against certain objections -- in particular, objections that claim that the distinction fails to coincide with commonsense moral intuitions. Yet I will suggest that, as we get clearer about the nature of the distinction and the sources of its intuitive appeal, it may seem that the intuitions it supports are not so well grounded as one could wish.

  1. Neue biosensorische Prinzipien für die Hämoglobin-A1c Bestimmung

    NASA Astrophysics Data System (ADS)

    Stöllner, Daniela

    2002-06-01

    Hämoglobin-A1c (HbA1c) ist ein Hämoglobin (Hb)-Subtypus, der durch nicht-enzymatische Glykierung des N-terminalen Valinrestes der Hämoglobin-beta-Kette entsteht. Das gemessene Verhältnis von HbA1c zum Gesamt-Hämoglobin (5-20 % bei Diabetikern) repräsentiert den Mittelwert der Blutglucosekonzentration über einen zweimonatigen Zeitraum und stellt zur Beurteilung der diabetischen Stoffwechsellage eine Ergänzung zur Akutkontrolle der Glukosekonzentration dar. Ziel der vorliegenden Arbeit war es, einen amperometrischen Biosensor für die Bestimmung des medizinisch relevanten Parameters HbA1c zu entwickeln. Durch Selektion geeigneter Bioerkennungselemente und deren Immobilisierung unter Erhalt der Bindungsfunktion für die Zielmoleküle Hämoglobin bzw. HbA1c wurden spezifische, hochaffine und regenerationsstabile Sensoroberflächen geschaffen. Für die Entwicklung des HbA1c-Biosensors wurden zwei Konzepte - Enzymsensor und Immunosensor - miteinander verglichen. Die enzymatische Umsetzung von HbA1c erfolgte mit der Fructosylamin Oxidase (FAO) aus Pichia pastoris N 1-1 unter Freisetzung von H2O2, welches sowohl optisch über eine Indikatorreaktion als auch elektrochemisch nach Einschluss der FAO in PVA-SbQ und Fixierung des Immobilisats vor einer H2O2-Elektrode nachgewiesen wurde. Die Kalibration des Enzymsensors mit der HbA1c-Modellsubstanz Fructosyl-Valin ergab Nachweisgrenzen, die ausserhalb des physiologisch relevanten HbA1c-Konzentrationsbereich lagen. Aus der Umsetzung von glykierten Peptiden mit einer nicht HbA1c analogen Aminosäurensequenz, z.B. Fructosyl-Valin-Glycin wurde zudem eine geringe HbA1c-Spezifität abgeleitet. Für den Immunosensor wurden zwei heterogene Immunoassay-Formate unter Verwendung von hochaffinen und spezifischen Antikörpern in Kombination mit Glucose Oxidase (GOD) als Markerenzym zum Nachweis von HbA1c untersucht. Beim indirekt-kompetitiven Immunoassay wurde anstelle des kompletten HbA1c-Moleküls das glykierte Pentapeptid

  2. Numerical simulation and experiment on multilayer stagger-split die.

    PubMed

    Liu, Zhiwei; Li, Mingzhe; Han, Qigang; Yang, Yunfei; Wang, Bolong; Sui, Zhou

    2013-05-01

    A novel ultra-high pressure device, multilayer stagger-split die, has been constructed based on the principle of "dividing dies before cracking." Multilayer stagger-split die includes an encircling ring and multilayer assemblages, and the mating surfaces of the multilayer assemblages are mutually staggered between adjacent layers. In this paper, we investigated the stressing features of this structure through finite element techniques, and the results were compared with those of the belt type die and single split die. The contrast experiments were also carried out to test the bearing pressure performance of multilayer stagger-split die. It is concluded that the stress distributions are reasonable and the materials are utilized effectively for multilayer stagger-split die. And experiments indicate that the multilayer stagger-split die can bear the greatest pressure.

  3. Historical review of die drool phenomenon during plastics extrusion

    NASA Astrophysics Data System (ADS)

    Musil, Jan; Zatloukal, Martin

    2013-04-01

    Die drool phenomenon is defined as unwanted spontaneous accumulation of extruded polymer melt on open faces of extrusion die during extrusion process. Such accumulated material builds up on the die exit and frequently or continually sticks onto the extruded product and thus damages it. Since die drool appears, extrusion process must be shut down and die exit must be manually cleaned which is time and money consuming. Although die drool is complex phenomenon and its formation mechanism is not fully understood yet, variety of proposed explanations of its formation mechanism and also many ways to its elimination can be found in open literature. Our review presents in historical order breakthrough works in the field of die drool research, shows many ways to suppress it, introduces methods for its quantitative evaluation and composition analysis and summarizes theories of die drool formation mechanism which can be helpful for extrusion experts.

  4. Fewer Patients Die During Hospital Inspection Weeks: Study

    MedlinePlus

    ... 164254.html Fewer Patients Die During Hospital Inspection Weeks: Study Slight differences in death rates were possibly ... likely to die if they are treated during weeks that inspectors are checking on the staff, a ...

  5. Interaction of Several Dies on an Elastic Half-Space

    NASA Astrophysics Data System (ADS)

    Argatov, I. I.

    2003-09-01

    A contact problem is solved for several rigid dies on an elastic half-space. Relationships between the generalized loads and generalized displacements of a large number of spaced dies are established. The interaction between flat-based dies is described in terms of their capacity characteristics. The general solution is constructed on the basis of Mossakovski's theorem. Explicit formulas are derived for a system of elliptic dies

  6. Impact of Temperature on Cooling Structural Variation of Forging Dies

    NASA Astrophysics Data System (ADS)

    Piesova, Marianna; Czan, Andrej

    2014-12-01

    The article is focused on the issue of die forging in the automotive industry. The cooling effect of temperature on the structure of forged die are under review. In the article, there is elaborated the analysis of theoretical knowledge in the field, focusing on die forging and experimentally proven effect of the cooling rate on the final structure of forged dies made of hypoeutectic carbon steel C56E2.

  7. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  8. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  9. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  10. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  11. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  12. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  13. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  14. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  15. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  16. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  17. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  18. A Contextualist Thanatology: A Pragmatic Approach to Death and Dying

    ERIC Educational Resources Information Center

    Reck, Andrew J.

    1977-01-01

    Denying the value of death but accepting its reality, the author points to dying, not death, as the problematic phenomenon with which a pragmatist thanatology must deal. It is suggested that dying contains opportunities for growth--for the dying as well as for their surviving friends and relatives. (Author)

  19. A Contextualist Thanatology: A Pragmatic Approach to Death and Dying

    ERIC Educational Resources Information Center

    Reck, Andrew J.

    1977-01-01

    Denying the value of death but accepting its reality, the author points to dying, not death, as the problematic phenomenon with which a pragmatist thanatology must deal. It is suggested that dying contains opportunities for growth--for the dying as well as for their surviving friends and relatives. (Author)

  20. A Contingency Framework for Listening to the Dying

    ERIC Educational Resources Information Center

    Vora, Erika; Vora, Ariana

    2008-01-01

    Listening to the dying poses special challenges. This paper proposes a contingency framework for describing and assessing various circumstances when listening to the dying. It identifies current approaches to listening, applies the contingency framework toward effectively listening to the dying, and proposes a new type of listening called…

  1. Die and telescoping punch form convolutions in thin diaphragm

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Die and punch set forms convolutions in thin dished metal diaphragm without stretching the metal too thin at sharp curvatures. The die corresponds to the metal shape to be formed, and the punch consists of elements that progressively slide against one another under the restraint of a compressed-air cushion to mate with the die.

  2. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  3. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  4. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  5. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  6. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  7. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  8. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  9. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  10. A Contingency Framework for Listening to the Dying

    ERIC Educational Resources Information Center

    Vora, Erika; Vora, Ariana

    2008-01-01

    Listening to the dying poses special challenges. This paper proposes a contingency framework for describing and assessing various circumstances when listening to the dying. It identifies current approaches to listening, applies the contingency framework toward effectively listening to the dying, and proposes a new type of listening called…

  11. Darwin als Sehhilfe für die Psychologie - Evolutionspsychologie

    NASA Astrophysics Data System (ADS)

    Schwab, Frank

    Im Folgenden geht es um Einäugige, stereoskopisches Sehen, weite und enge Horizonte, Monokel und Sonnenbrillen. Der Beitrag versucht die Metapher des Sehens und der Sehhilfen anzuwenden, um so zu verdeutlichen, welchen Gewinn die herkömmliche Psychologie durch die Verwendung einer Darwin'schen Brille erlangen kann.

  12. Differentiating suicide decedents who died using firearms from those who died using other methods.

    PubMed

    Anestis, Michael D; Khazem, Lauren R; Anestis, Joye C

    2017-02-22

    Studies have documented a link between gun ownership and suicide, but little is known about characteristics of those most likely to use a gun in a suicide attempt rather than alternative methods. We examined which factors differentiate suicide decedents who died using a gun from those who died by other methods. We further examined whether such findings are consistent within the subcomponent of our larger sample comprised entirely of gun owning suicide decedents. Data reflect 267 suicide decedents, with data provided by individuals who identified as having lost someone to suicide (loss survivors). Within the full sample, a higher proportion of gun-owning and male suicide decedents died by firearm. Further, individuals who had previously discussed suicide or engaged in one or more non-lethal suicide attempts were less likely to die by suicide using a gun. Within the subsample of gun owning suicide decedents, a greater proportion of decedents who stored guns at home and in unsecure locations died from self-inflected gunshot wounds. These findings add clarity to the relationship between firearm ownership and death by suicide at the individual level. Furthermore, these findings are consistent with the notion that means safety implementation may represent a vital suicide prevention tool.

  13. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Development of Surface Engineered Coating Systems for Aluminum Pressure Die Casting Dies: Towards a 'Smart' Die Coating

    SciTech Connect

    Dr. John J. Moore; Dr. Jianliang Lin,

    2012-07-31

    The main objective of this research program was to design and develop an optimal coating system that extends die life by minimizing premature die failure. In high-pressure aluminum die-casting, the die, core pins and inserts must withstand severe processing conditions. Many of the dies and tools in the industry are being coated to improve wear-resistance and decrease down-time for maintenance. However, thermal fatigue in metal itself can still be a major problem, especially since it often leads to catastrophic failure (i.e. die breakage) as opposed to a wear-based failure (parts begin to go out of tolerance). Tooling costs remain the largest portion of production costs for many of these parts, so the ability prevent catastrophic failures would be transformative for the manufacturing industry.The technology offers energy savings through reduced energy use in the die casting process from several factors, including increased life of the tools and dies, reuse of the dies and die components, reduction/elimination of lubricants, and reduced machine down time, and reduction of Al solder sticking on the die. The use of the optimized die coating system will also reduce environmental wastes and scrap parts. Current (2012) annual energy saving estimates, based on initial dissemination to the casting industry in 2010 and market penetration of 80% by 2020, is 3.1 trillion BTU's/year. The average annual estimate of CO2 reduction per year through 2020 is 0.63 Million Metric Tons of Carbon Equivalent (MM TCE).

  14. WA30 The dying well community charter and dying matters: a united kingdom (uk) approach to public health and dying.

    PubMed

    Ali, Nuzhat; Chapman, Simon

    2015-04-01

    The Dying Matters Coalition, set up following the UK Government's End of Life Care Strategy in 2008, is led by the NCPC (UK umbrella organisation). Dying Matters supports changing knowledge, attitudes and behaviours towards dying, death and bereavement, and through this to make 'living and dying well' the norm. The Coalition has over 30,000 members, and encourages people to talk to friends and family about their end of life wishes, including how they would like to be cared for, where they want to die and their funeral plans. The Dying Well Community Charter is an innovative approach to community development work, working with Pathfinder areas to pilot this approach, rather than encouraging health and social care services to "do" end of life care "to" people, to encourage them to work with community leaders to make end of life care everyone's responsibility. Participants will discover what has worked in the UK, including many low resource options, and a community development approach to palliative care. We worked with 8 Pathfinder communities to ask them to pilot the Dying Well Community Charter approach. Dying Matters was the first national awareness and behaviour change campaign around death, dying and bereavement. Dying Matters has over 30,000 members. Outcome of the Charter work is unknown, but more will be known by the time of the conference. How communities can come together for better death, dying and bereavement. That death and dying are not subjects that need to be avoided, and can be engaged with for better outcomes. © 2015, Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  15. Dying with dignity: a concept analysis.

    PubMed

    Hemati, Zeinab; Ashouri, Elaheh; AllahBakhshian, Maryam; Pourfarzad, Zahra; Shirani, Farimah; Safazadeh, Shima; Ziyaei, Marziyeh; Varzeshnejad, Maryam; Hashemi, Maryam; Taleghani, Fariba

    2016-05-01

    This article is a report of an analysis of the concept of dying with dignity. Dignity is an important component of providing care for dying patients and their families. Nevertheless, given that this concept is poorly defined, concept analysis is one of the best ways to define and clarify the concept of death with dignity with the aim to enhance its application in clinical practice, research and education. A search of multiple nursing and social sciences databases was undertaken, including Academic Search Complete, Science Direct, ProQuest, Scopus, Medline, PubMed, EBSCO, Ovid, Noormage, Cinahl, Magiran, PsycINFO and SID. After an extensive review of the literature from 1998-2014, about 14 related articles were included in the study. Based on these articles, the applications, attributes and experimental results of and references to death with dignity were recorded. Based on this analysis, the most important attributes of this concept included respect for privacy, respect, spiritual peace and hope. The antecedents of this concept included consideration of moral values during caregiving, preservation of human dignity as a patient right and professional ethics, and belief in the dignity of self and others, consideration of culture in providing end-of-life care. The consequences of this concept included a sense of peace in the patient and their family, peaceful death and provision of patient privacy and comfort. The concept of patient dignity has been referred to in many contexts. However, considering the dignity of dying patients commensurate with their culture is the most important component of care provided by nurses to facilitate a peaceful death. Respecting the dignity of the patient results in the reduction of her/his suffering and prepares her/him for a comfortable death. © 2016 John Wiley & Sons Ltd.

  16. Dying cancer patients talk about euthanasia.

    PubMed

    Eliott, Jaklin A; Olver, Ian N

    2008-08-01

    Within developed nations, there is increasing public debate about and apparent endorsement of the appropriateness of euthanasia as an autonomous choice to die in the face of intolerable suffering. Surveys report socio-demographic differences in rates of acceptance of euthanasia, but there is little in-depth analysis of how euthanasia is understood and positioned within the social and moral lives of individuals, particularly those who might be considered suitable candidates-for example, terminally-ill cancer patients. During discussions with 28 such patients in Australia regarding medical decisions at the end of life, euthanasia was raised by 13 patients, with the others specifically asked about it. Twenty-four patients spoke positively of euthanasia, 19 of these voicing some concerns. None identified euthanasia as a currently favoured option. Four were completely against it. Endorsement for euthanasia was in the context of a hypothetical future or for a hypothetical other person, or temporally associated with acute pain. Arguments supporting euthanasia framed the issue as a matter of freedom of choice, as preserving dignity in death, and as curbing intolerable pain and suffering, both of the patient and of those around them. A common analogy featured was that of euthanising a dog. These arguments were typically presented as self-evident justification for euthanasia, construed as an appropriate choice to die, with opposers positioned as morally inferior or ignorant. The difficulties of ensuring 'choice' and the moral connotations of 'choosing to die,' however, worked to problematise the appropriateness of euthanising specific individuals. We recommend further empirical investigation of the moral and social meanings associated with euthanasia.

  17. Subarachnoid hemorrhage: who dies, and why?

    PubMed

    Lantigua, Hector; Ortega-Gutierrez, Santiago; Schmidt, J Michael; Lee, Kiwon; Badjatia, Neeraj; Agarwal, Sachin; Claassen, Jan; Connolly, E Sander; Mayer, Stephan A

    2015-08-31

    Subarachnoid hemorrhage (SAH) is a devastating form of stroke. Causes and mechanisms of in-hospital death after SAH in the modern era of neurocritical care remain incompletely understood. We studied 1200 consecutive SAH patients prospectively enrolled in the Columbia University SAH Outcomes Project between July 1996 and January 2009. Analysis was performed to identify predictors of in-hospital mortality. In-hospital mortality was 18% (216/1200): 3% for Hunt-Hess grade 1 or 2, 9% for grade 3, 24% for grade 4, and 71% for grade 5. The most common adjudicated primary causes of death or neurological devastation leading to withdrawal of support were direct effects of the primary hemorrhage (55%), aneurysm rebleeding (17%), and medical complications (15%). Among those who died, brain death was declared in 42%, 50% were do-not-resuscitate at the time of cardiac death (86% of whom had life support actively withdrawn), and 8% died despite full support. Admission predictors of mortality were age, loss of consciousness at ictus, admission Glasgow Coma Scale score, large aneurysm size, Acute Physiology and Chronic Health Evaluation II (APACHE II) physiologic subscore, and Modified Fisher Scale score. Hospital complications that further increased the risk of dying in multivariable analysis included rebleeding, global cerebral edema, hypernatremia, clinical signs of brain stem herniation, hypotension of less than 90 mm Hg treated with pressors, pulmonary edema, myocardial ischemia, and hepatic failure. Delayed cerebral ischemia, defined as deterioration or infarction from vasospasm, did not predict mortality. Strategies directed toward minimizing early brain injury and aneurysm rebleeding, along with prevention and treatment of medical complication, hold the best promise for further reducing mortality after SAH.

  18. Accurate Die Design for Automotive Panel Stamping Considering the Compensation Related with Die Deflection and Blank Thinning

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Xu, Dongkai; Xia, Guodong; Li, Xifeng; Chen, Jieshi; Zhang, Jian; Yan, Wei; Li, Yue

    2011-08-01

    In order to improve assembly accuracy, automotive body panels have to be fabricated with higher dimensional and surface quality requirements, therefore the die faces should be designed more accurately to consider more relevant factors. In the presented study, we proposed algorithms to realize the following functions: through forming process simulation, the thinning distribution on the deformed blank was extracted as first kind of compensation; through die structural CAE analysis which automatically mapped the boundary contact forces onto the die surfaces from process simulation results, the die deflection was calculated as second kind of compensation. These two quantitative contributions were added together to compensate the die face. The proposed methodologies were programmed and integrated with LS-Dyna and HyperWorks, and also integrated with Autoform and CATIA linear CAE functionalities separately. In addition, a software toolkit to calculate the contacting ratio was also developed to evaluate the effectiveness of die face compensation. The second toolkit developed was verified by an automotive structural part forming die design, through die compensation and geometric optimization, the predicted contact ratio between the die face and formed blank was improved a lot, and the first toolkit was testified by a fender drawing die design. It shows that the die face compensation can be realized and integrated seamlessly between CAD model, process simulation model and die structural CAE model with the help of data I/O tools developed by the authors.

  19. Euthanasia, assisted dying and the right to die in Ghana: a socio-legal analysis.

    PubMed

    Owusu-Dapaa, Ernest

    2013-12-01

    There is unanimity among states to protect the continuation of life of the individual as a safeguard against their collective extinction. The right to life is accordingly guaranteed but its antithesis, the right to die is the subject of an unending debate. The controversy over the right to die is deepened by rapid advances in medicine, creating the capability for prolongation of life beyond the span which one's natural strength can endure. Ghana's supreme law explicitly guarantees the right to life but remains ambiguous on right to die, particularly euthanasia and assisted dying. Thus, some of the other rights, such as the right to dignity and not to be tortured, can creatively be exploited to justify some instances of euthanasia. Ghana's criminal code largely proscribes euthanasia. Notwithstanding, proscription of euthanasia and assisted dying by the law, in Ghana's empirical work undertaken in some of the communities in Ghana, suggests that euthanasia is quietly practisedin health facilities and private homes, especially in the rural areas. Contrary to the popular reasons assigned in the literature of the Western world, with respect to the practice or quest for legalization of euthanasia as being a necessity for providing relief from pain or hopeless quality of life, empirical data from social and anthropological studies conducted in Ghana reveal that poverty is the motivation for informal euthanasia practice in Ghana rather than genuine desire on part of patients to die or their relatives to see to their accelerated death. Apart from poverty, traditional cultural values of African societies consider non-natural death as a taboo and ignominy to the victim and his family. Thus, any move by the government to legalize euthanasia will need to be informed by widely held consultations and a possible referendum; otherwise the law may be just a mere transplant of Western models of legislation on euthanasia without reflecting the ethos of the African people.

  20. Die Schokoladen-Diät

    NASA Astrophysics Data System (ADS)

    Ehrhardt, Matthias

    Schlankheitskuren sind einerseits ein soziales Phänomen, aber auch ein großer Zweig der Nahrungsmittelindustrie. Die Industrie bietet dabei verschiedene Produkte an, wie Diätlebensmittel, Nahrungsergänzungsmittel, Sportkleidung und -ausrüstung, Übungsvideos und -bücher, usw. Allerdings ist es bekanntermaßen sehr schwer, das einmal erreichte Wunschgewicht auch langfristig zu halten. Häufig tritt dabei der so genannte Jojo-Effekt auf, so dass man schließlich nach der Diät mehr wiegt als vorher.

  1. Do imaginary companions die? An exploratory study.

    PubMed

    Kastenbaum, Robert; Fox, Lynn

    Adults in this exploratory study usually recalled that their childhood imaginary companions faded away or were dismissed as other options for social interaction became more appealing. However, eight participants reported that their IC had died. Analysis of these deaths offers a glimpse of the child's talent for transitional thought processes that navigate between the emerging constraints of logic and the continuing appeal of fantasy. It is suggested that young children are testing the limits and possibilities of what it means to be "real" at the same time they are trying to puzzle out "alive" and "dead."

  2. Implementing California's Law on Assisted Dying.

    PubMed

    Mishra, Ruchika

    2017-03-01

    On October 5, 2015, Governor Jerry Brown approved bill ABX2 15, the End of Life Option Act, making California the fifth state in the country to allow physician-assisted dying. The law was modeled after Oregon's 1997 Death with Dignity Act. When the legislative special session ended on March 10, 2016, California health care providers had only ninety days to respond to the state mandate before the law would take effect, on June 9, 2016. Experience with the law so far suggests several challenges with implementation.

  3. Method and apparatus for die forming metal sheets and extrusions

    NASA Astrophysics Data System (ADS)

    Darter, John L.

    1986-06-01

    The invention comprises an apparatus for die forming metal sheets and extrusions which utilizes die blocks of low melting temperature metallic material. The die blocks are formed in an adjustable mold which comprises a mold box, a pivotable dam within the mold box and blocking means for locking the pivotable dam member in a desired angular position. Once a desired die block angle is ascertained for a particular joggle, the pivotable member of the mold box is adjusted to produce the desired angle in the die casting made in the mold box.

  4. Sheet metal stamping die design for warm forming

    DOEpatents

    Ghosh, Amit K.

    2003-04-22

    In metal stamping dies, by taking advantage of improved material flow by selectively warming the die, flat sections of the die can contribute to the flow of material throughout the workpiece. Local surface heating can be accomplished by placing a heating block in the die. Distribution of heating at the flat lower train central regions outside of the bend region allows a softer flow at a lower stress to enable material flow into the thinner, higher strain areas at the bend/s. The heating block is inserted into the die and is powered by a power supply.

  5. Die swell as an objective in the design of polymer extrusion dies

    NASA Astrophysics Data System (ADS)

    Siegbert, Roland; Behr, Marek; Elgeti, Stefanie

    2016-10-01

    This paper focuses on developing a suitable objective function for the inverse form of profile extrusion die design. First, the problem is motivated by introducing the extrusion die design process. After describing how Computer Aided Engineering enhances the traditional design process, a set of applicable objective functions is introduced. The main criteria for identifying the most suitable are computational applicability, robustness and smoothness of the functional. After discussing the results of several simulations, an objective function is proposed for the implementation in an existing optimization framework utilizing parameter-based optimization.

  6. ["Good dying"--definition and current state of research].

    PubMed

    Hutter, Nico; Stößel, Ulrich; Meffert, Cornelia; Körner, Mirjam; Bozzaro, Claudia; Becker, Gerhild; Baumeister, Harald

    2015-08-01

    The advances of modern medicine did not only result in prolongation of life expectancy, but also led to a shift from dying at home to dying in public institutions. In western countries most people die at advanced age in medical facilities. Hence, the question regarding the conditions, which should be provided by society and especially medicine, to allow terminally ill people to experience "good dying" is substantial. For this purpose, an examination of patients', family members' and health care providers' understanding of the term " good dying" is required. The present paper aims at shedding light on the term "good dying" and to summarize the current state of research. Therefore, the attributes of "good dying" will be described from the perspectives of patients, family members and health care providers, which are discussed and examined in current medical-sociological research. These attributes can be illustrated on three dimensions: Quality of life at the end of life (e. g. pain relief, mental well-being), quality of dying (e. g. avoiding prolonged dying, autonomy, presence of relatives) and quality of health care at the end of life (e. g. patient-oriented health care, positive communication between health care providers and patients, availability of guidelines). Although the attributes of "good dying" are described in detail in the existing literature, further studies have to clarify the relevance and impact of these attributes as predictors of "good dying". © Georg Thieme Verlag KG Stuttgart · New York.

  7. DIE Deflection Modeling: Empirical Validation and Tech Transfer

    SciTech Connect

    R. Allen Miller

    2003-05-28

    This report summarizes computer modeling work that was designed to help understand how the die casting die and machine contribute to parting plane separation during operation. Techniques developed in earlier research (8) were applied to complete a large computational experiment that systematically explored the relationship between the stiffness of the machine platens and key dimensional and structural variables (platen area covered, die thickness, platen thickness, thickness of insert and the location of the die with respect to the platen) describing the die/machine system. The results consistently show that there are many significant interactions among the variables and it is the interactions, more than the individual variables themselves, which determine the performance of the machine/die system. That said, the results consistently show that it is the stiffness of the machine platens that has the largest single impact on die separation.

  8. [The debate about the right to die].

    PubMed

    Beca, Juan Pablo; Ortiz, Armando; Solar, Sebastián

    2005-05-01

    The Right to Die is a debatable issue and some basic notions need to be clarified to discuss it. Death needs to be recognized as part of human life. The goal of medicine is to avoid pain and alleviate suffering, to prevent premature death and when this is not possible, to let it occur peacefully. The concept of euthanasia is unclear, which increases the confusion on end-of-life topics. The term euthanasia should be used only when referring to medical acts performed to produce the patient's death, with the intention of terminating his/her suffering. It is what is usually called "active" euthanasia, which can be voluntary or involuntary. It is essential to understand the difference between producing and allowing death. This will permit timely decisions about limiting or withdrawing treatments, that can be disproportionate or that are only prolonging suffering. Limiting treatments does not mean to abandon the patient but rather to redefine his needs, such as pain treatment, prevention of complications, and relief of suffering. The ethic rationale for these decisions is the respect to the dignity of human life, and the estimation of proportionality or futility of each treatment. The physician's duty with the patient at the end of his life is to assist him in dying according to his values and to minimize his distress.

  9. Dying, mourning, and spirituality: a psychological perspective.

    PubMed

    Marrone, R

    1999-09-01

    Based in an unfortunate tradition that stretches back in time to Watson's behaviorism and Freud's psychoanalysis, psychology has tended to reject and to pathologize matters of the spirit. In the past 30 years, however, with the advent of what has been termed the cognitive revolution, psychology has greatly expanded the scope of its subject matter. Psychologists and thanatologists have begun to unravel the cognitive underpinnings of our assumptive world and the transformation of those underpinnings in times of crisis and stress. This article examines the cognitive basis of the spiritual experience and the use of cognitive assimilation, accommodation strategies during the process of mourning the death of a loved one, as well as during the process of living our own dying. Of special importance to mental health professionals and clergy, new research on dying, mourning, and spirituality suggests that the specific ways in which people rediscover meaning--such as belief in traditional religious doctrine, the afterlife, reincarnation, philanthropy, or a spiritual order to the universe--may be less important than the process itself. In other words, in the midst of dealing with profound loss in our lives, the ability to reascribe meaning to a changed world through spiritual transformation, religious conversion, or existential change may be more significant than the specific content by which that need is filled.

  10. The dying child and surviving family members.

    PubMed

    Shrier, D K

    1980-12-01

    This overview of death and dying focuses on the dying child and surviving family members. Children's concepts of death at different developmental stages are reviewed. These range from an inability to distinguish death from other forms of separation prior to age 3, through partial concepts of death until, by age 10 to 15 years, children are able to conceptualize death as universal, inevitable and final. The importance of adults assisting in the child's growing comprehension of death is stressed. The stages of grief and mourning, as outlined by Kubler-Ross, are reviewed from the perspective of the child and family: denial, anger, bargaining, depression and acceptance. Recognition is given to the variations in coping styles among different family members. The special circumstances related to the death of an infant and the impact of the death of a child on the surviving siblings are discussed. Specific helpful interventions to assist families in coping with mourning are described. The death of a child remains one of the most painful and difficult events for a family and its physician to accept.

  11. Dying or living?: The double bind.

    PubMed

    Longhofer, J

    1980-06-01

    Describing the behaviors of terminally ill patients, their families and those charged with their care has received considerable attention during the past decade. This study of comprehensive cancer treatment and research facility indicates that the prevailing theory is limited to explanation at the intra-psychic level. In her work with hundreds of terminal cases, Dr. Elizabeth Kubler-Ross found that patients typically progress through five stages: 1) denial, 2) anger, 3) bargaining, 4) depression, and 5) acceptance. She concludes that the majority of her patients die in a stage of acceptance--a state of equanimity. Recently, scholars have claimed that this five stage scheme has limited applicability and may in fact contribute to the formalization of a dying person's behavior. This preliminary report proposes that the stage theory, if it has any descriptive validity, becomes meaningful only when used to describe behaviors occurring among patients, families, and medical practitioners. A plausible explanation of these behaviors is accomplished by examination of communication patterns containing the structure of paradox or double bind. Patients are forced to perceive realities about their physical conditions not as they appear to them, but as they are defined by those in their environment. This paper explores these communication patterns in relation to the structure of social relationships and the specific contents of messages being transmitted and received.

  12. Death and dying: what the patient wants.

    PubMed

    Balducci, L

    2012-04-01

    A good death and a death with dignity may be achieved when death is congruent with the personal values of the patient. It behooves the practitioner to recognize these values and to cater to them. This paper describes effective communication with the dying person, and the partnership of treatment team, patient and family in face of the patient death. To identify and define the patient wishes it is necessary to learn how to interpret the patient's non verbal as often patients are unable to formulate the questions they wish to ask concerning their passing. These difficulties stem from several cultural factors including concern about disturbing the practitioner. It is the treatment team's responsibility to facilitate this discussion. A good death is achieved when symptoms are controlled and when patients and family recognize death as a unique living experience to be treasured as any other living experience. A death with dignity brings healing, that is always possible even when cure is out of reach. Patient's and practitioner's values may be at odd in face of controversial issues including euthanasia, assisted suicide and terminal sedation. Though he/she should not be compelled to execute these requests, the practitioner should be able to entertain an open discussion with the patient concerning these issues. Open communication and reflective listening even in presence of disagreements are the venue of healing. The study of death and dying requires novel approaches including personal narrative and qualitative research to complement traditional research instrument, such as questionnaire that cannot embrace the whole human dimension.

  13. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, J.E.; Korth, G.E.

    1985-06-27

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block. 4 figs.

  14. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, John E.; Korth, Gary E.

    1986-01-01

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block.

  15. Caregivers in Death, Dying, and Bereavement Situations: International Work Group on Death, Dying, and Bereavement

    ERIC Educational Resources Information Center

    Papadatou, Danai

    2006-01-01

    This document examines issues related to the work of both formal and informal caregivers as they are involved in caring for dying and/or bereaved individuals. The examination is organized around five central questions: what brings individuals to this work?; what enables them to develop effective caregiving relationships?; what sustains them in…

  16. Die casting die deflections: Prediction and attenuation. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.Allen; Ahuett-Garza, Horacio; Choudhury, Aswin K.; Dedhia, Sanjay

    1998-05-01

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects or problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information from the voxel model for display to the user.

  17. [From absolute necessity of dying to preventive planning of dying? The change of social and medicine debates on dying in the 1980s].

    PubMed

    Jordan, I

    2010-04-01

    International euthanasia debates focussing on "autonomous dying" in the 1980s corresponded with a general change in the health-care system: availability of new technical means with an analogous medical-ethic understanding of human suffering and dying. This change is part of a general development from "passive health consumption" to "active prevention" in our society.

  18. The dying role: its relevance to improved patient care.

    PubMed

    Noyes, R; Clancy, J

    1977-02-01

    Society is failing to meet the obligation it has to its dying members. Persons with terminal illnesses suffer isolation and neglect in hospitals, receive overzealous treatment by physicians, and are kept in ignorance of their situation by families and medical personnel. Evidence for these statements has come from observers of the medical care system and from dying patients themselves (Kübler-Ross, 1969; Reynolds and Kalish, 1974; Sudnow, 1967); In the nineteenth century it was common for persons to die in the familiar environs of their homes, surrounded by grieving families from whom they parted in a meaningful manner (Blauner, 1966). Dying persons of today no longer fill a well-defined social role. Instead, the distinction between the roles of sick and dying persons has been lost and, in the resulting confusion, the care of dying people has suffered. The purpose of this article is to clarify the distinction between the dying and sick roles, identify the signs of existing role confusion, suggest ways in which this confusion may be corrected, and show how reestablishment of the dying role can result in improved care of dying people. The important part physicians play in defining sick and dying roles will be emphasized.

  19. The Dying Role: Its Relevance to Improved Patient Care.

    PubMed

    Noyes, Russell; Clancy, John

    2016-01-01

    SOCIETY is failing to meet the obligation it has to its dying members. Persons with terminal illnesses suffer isolation and neglect in hospitals, receive overzealous treatment by physicians, and are kept in ignorance of their situation by families and medical personnel. Evidence for these statements has come from observers of the medical care system and from dying patients themselves (Kübler-Ross, 1969; Reynolds and Kalish, 1974; Sudnow, 1967). In the nineteenth century it was common for persons to die in the familiar environs of their homes, surrounded by grieving families from whom they parted in a meaningful manner (Blauner, 1966). Dying persons of today no longer fill a well-defined social role. Instead, the distinction between the roles of sick and dying persons has been lost and, in the resulting confusion, the care of dying people has suffered. The purpose of this article is to clarify the distinction between the dying and sick roles, identify the signs of existing role confusion, suggest ways in which this confusion may be corrected, and show how reestablishment of the dying role can result in improved care of dying people. The important part physicians play in defining sick and dying roles will be emphasized.

  20. Necroptosis: A new way of dying?

    PubMed

    Hanson, Britt

    2016-09-01

    This review embarks upon a cell death journey from the discovery of apoptosis and necrosis through to the coalescence of these: necroptosis. The mechanisms of 2 emerging necrotic cell death pathways, pyroptosis and ferroptosis, will be explored before delving into apoptotic and necroptotic signaling cascades, highlighting the complex interplay between molecular players. The involvement of the ripoptosome, interferon signaling and DNA damage in necroptosis will be discussed briefly. The major focus is on necroptosis initiation by tumor necrosis factor-α (TNFα) and its cognate receptor TNFR1, caspase-independent RIP1/RIP3/MLKL necrosome activation and cell death propagation by damage-associated molecular pattern (DAMP) release. Finally, the implications of a complex cell death signaling network will be revealed in the context of cancer biology and therapy. The clinical contribution of the discovery of necroptosis as an unequivocally new way of dying is monumental and could drastically alter cancer therapy strategies in the future.

  1. HIV transcription is induced in dying cells

    SciTech Connect

    Woloschak, G.E.; Chang-Liu, Chin-Mei; Schreck, S. |; Panozzo, J.; Libertin, C.R.

    1996-02-01

    Using HeLa cells stably transfected with an HIV-LTR-CAT construct, we demonstrated a peak in CAT induction that occurs in viable (but not necessarily cell-division-competent) cells 24 h following exposure to some cell-killing agents. {gamma} rays were the only cell-killing agent which did not induce HIV transcription; this can be attributed to the fact that {gamma}-ray-induced apoptotic death requires functional p53, which is not present in HeLa cells. For all other agents, HIV-LTR induction was dose-dependent and correlated with the amount of cell killing that occurred in the culture. Doses which caused over 99% cell killing induced HIV-LTR transcription maximally, demonstrating that cells that will go on to die by 14 days are the cells expressing HIV-LTR-CAT.

  2. Autonomy, rationality and the wish to die.

    PubMed Central

    Clarke, D M

    1999-01-01

    Although suicide has traditionally carried a negative sanction in Western societies, this is now being challenged, and while there remains substantial public concern surrounding youth and elder suicide, there is a paradoxical push to relax the prohibition under certain circumstances. Central to the arguments behind this are the principles of respect for autonomy and the importance of rationality. It is argued here that the concepts of rationality and autonomy, while valuable, are not strong enough to substantiate a categorical "right to suicide" and that the concepts of "understandability" and "respect" are more useful and able to provide the foundation for responding to a person expressing a wish to die. Roman suicide, sometimes held as an example of "rational suicide", illustrates the effects of culture, tradition and values on the attitudes to, and the practice of, suicide. PMID:10635498

  3. Paradoxical contributions of EEG during protracted dying.

    PubMed

    Spudis, E V; Penry, J K; Link, A S

    1984-02-01

    Estimates of the potential for recovery from severe brain damage have become more accurate as EEG and imaging techniques evolve. When all modern electrical criteria for brain death are satisfied, useful recovery is probably impossible. Many patients who have no reasonable chance of returning to a cognitive, sapient, or useful state may be nurtured throughout a prolonged final illness primarily because of brain waves that fluctuate in the 2- to 5-microV range. The incidence of such protracted dying is unknown. We illustrate diffuse low-amplitude wave forms and regional fragments recorded from a 27-year-old woman maintained on a respirator for six months after loss of brain-stem reflexes. Considering the limited noise-signal ratio of modern equipment, popular EEG criteria for death may be prematurely rigid, prolonging death in tragic circumstances.

  4. Hubble's View of a Dying Star

    NASA Technical Reports Server (NTRS)

    2003-01-01

    A recent image of a dying star containing strange, complex structures may help explain the death throes of stars and defy our current understanding of physics. The image of protoplanetary nebula IRAS22036+5306 (in the Infrared Astronomical Satellite Point Source Catalog) was taken on Dec. 15, 2001, by the Wide Field and Planetary Camera 2, designed and built by NASA's Jet Propulsion Laboratory, onboard NASA's Hubble Space Telescope. It is one of the best images yet to capture a fleeting period at the end of a Sun-like star's life, called the protoplanetary nebula phase.

    This phase, which looks like a beautiful cloud of glowing gas lit up by ultraviolet light from the star's core, results when a star evolves into a bloated red giant and sheds its outer layers. 'Protoplanetary nebulas are rare objects with short lifetimes,' said JPL astrophysicist Dr. Raghvendra Sahai. 'It has generally been very difficult to obtain images of such objects in which their structure can be resolved in detail.'

    This image is particularly important because it contains a series of what Sahai and his colleagues call 'knotty jets,' blob-like objects emerging along roughly straight lines from the center of the cigar-shaped, bipolar nebula (See insets). There are various theories about what may produce such jets, though it is hard to prove their existence due to their short-lived, episodic nature. Detailed multi-wavelength studies of these nebulas with NASA's Great Observatories are being carried out to understand the nature and origin of these enigmatic jets, and how they may be sculpting shrouds of dying stars into exotic shapes. The Hubble Space Telescope is one of NASA's Great Observatories.

  5. Clinical Criteria for Physician Aid in Dying

    PubMed Central

    Pope, Thaddeus Mason; Rich, Ben A.

    2016-01-01

    Abstract More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period. PMID:26539979

  6. Clinical Criteria for Physician Aid in Dying.

    PubMed

    Orentlicher, David; Pope, Thaddeus Mason; Rich, Ben A

    2016-03-01

    More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period.

  7. Retrospektive Analyse von Zufallsbefunden, die bei Patienten mit kutanem malignen Malignom durch (18) F-Fluordeoxyglucose-PET/CT erhoben wurden.

    PubMed

    Conrad, Franziska; Winkens, Thomas; Kaatz, Martin; Goetze, Steven; Freesmeyer, Martin

    2016-08-01

    Bei der (18) F-Fluordeoxyglucose-Positronenemissionstomographie/Computertomographie (FDG-PET/CT) ergeben sich häufig Zufallsbefunde. In der vorliegenden Studie konzentrierten wir uns auf mittels FDG-PET/CT erhaltene Zufallsbefunde bei Patienten mit kutanem Melanom und überprüften deren Relevanz hinsichtlich weiterer diagnostischer Maßnahmen und Interventionen. Die Krankenakten von 181 konsekutiven Melanom-Patienten wurden retrospektiv ausgewertet, um das Management von Zufallsbefunden zu dokumentieren. Der Schwerpunkt lag dabei auf den histologischen Befunden. Bei 33 von 181 (18 %) Patienten lagen 39 relevante Zufallsbefunde vor, und zwar im Kolorektalbereich (n = 15 Patienten), in der Schilddrüse (n = 8), der Prostata (n = 2), dem Bewegungsapparat (n = 2), in Lymphknoten (n = 2), der Parotis (n = 1), den Mandeln (n = 1), den Nieren (n = 1) und der Gallenblase (n = 1). Bei 25 Patienten schlossen sich weitere diagnostische Verfahren an, wobei in 21 Fällen ein klinisches Korrelat nachgewiesen wurde. Bei 16 von 21 Patienten ergab sich eine Neoplasie, darunter fünf maligne Läsionen (vier Kolonkarzinome und ein Prostatakarzinom). Die Malignome wurden frühzeitig diagnostiziert und in der Mehrzahl der Fälle erfolgreich entfernt. Der Einsatz der FDG-PET/CT als Routine-Diagnostik wird in den Leitlinien empfohlen und ist indiziert bei malignem Melanom ab Stadium IIC. In dieser Studie wurden auf effektive Weise ansonsten nicht erkannte Krebserkrankungen, insbesondere Kolonkarzinome, detektiert. In den meisten Fällen war eine frühe Intervention möglich. Zufallsbefunde durch FDG-PET/CT sollten, unter Berücksichtigung des Zustands und der Wünsche des Patienten, mit den geeigneten diagnostischen Maßnahmen abgeklärt werden. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  8. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  9. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  10. Preparation of chitin-silica composites by in vitro silicification of two-dimensional Ianthella basta demosponge chitinous scaffolds under modified Stöber conditions.

    PubMed

    Wysokowski, Marcin; Behm, Thomas; Born, René; Bazhenov, Vasilii V; Meissner, Heike; Richter, Gert; Szwarc-Rzepka, Karolina; Makarova, Anna; Vyalikh, Denis; Schupp, Peter; Jesionowski, Teofil; Ehrlich, Hermann

    2013-10-01

    Chitin is a biopolymer found in cell walls of various fungi and skeletal structures of numerous invertebrates. The occurrence of chitin within calcium- and silica-containing biominerals has inspired development of chitin-based hybrids and composites in vitro with specific physico-chemical and material properties. We show here for the first time that the two-dimensional α-chitin scaffolds isolated from the skeletons of marine demosponge Ianthella basta can be effectively silicified by the two-step method with the use of Stöber silica micro- and nanodispersions under Extreme Biomimetic conditions. The chitin-silica composites obtained at 120 °C were characterized by the presence of spherical SiO2 particles homogeneously distributed over the chitin fibers, which probably follows from the compatibility of Si-OH groups to the hydroxyl groups of chitin. The biocomposites obtained were characterized by various analytical techniques such as energy dispersive spectrometry, scanning electron microscopy, thermogravimetric/differential thermal analyses as well as X-ray photoelectron spectroscopy, Fourier transform infrared and Raman spectroscopy to determine possible interactions between silica and chitin molecule. The results presented proved that the character and course of the in vitro chitin silicification in Stöber dispersions depended considerably on the degree of hydrolysis of the SiO2 precursor.

  11. Uptake of 2S albumin allergens, Ber e 1 and Ses i 1, across human intestinal epithelial Caco-2 cell monolayers.

    PubMed

    Moreno, F Javier; Rubio, Luis A; Olano, Agustín; Clemente, Alfonso

    2006-11-01

    We have investigated the absorption rates of two purified major allergen 2S albumins, Ber e 1 from Brazil nuts (Bertholletia excelsa Humb. & Bonpl.) and Ses i 1 from white sesame seeds (Sesamum indicum L.), across human intestinal epithelial Caco-2 cell monolayers following gastrointestinal digestion in vitro. The transport from apical to basolateral side in cell monolayers was evaluated by RP-HPLC-UV and indirect competitive ELISA methods, being confirmed by western-blotting analysis. Significant amounts (approximately 15-25 nmol micromol(-1) initial amount/h) of intact Ber e 1 and Ses i 1 were found in the basolateral side. The absorption rates of both plant allergens through the cell monolayer were shown to be constant during the whole incubation period (4 h at 37 degrees C), verifying that the permeability of the membrane was not altered by the allergen digests. Our findings revealed that both purified 2S albumin allergens may be able to survive in immunologically reactive forms to the simulated harsh conditions of the gastrointestinal tract to be transported across the Caco-2 cell monolayers, so that they would be able to sensitize the mucosal immune system and/or elicit an allergic response.

  12. Death and dying anxiety among bereaved and nonbereaved elderly parents.

    PubMed

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Tinsky-Roimi, Tal

    2011-08-01

    This study examines differences in death and dying anxiety between bereaved and nonbereaved elderly Israeli parents, as well as correlates of these factors among bereaved parents. A total of 97 parents (49 bereaved, 48 nonbereaved) completed measures of death and dying anxiety and religiosity. Bereaved parents reported significantly higher dying anxiety scores than nonbereaved parents, but there were no significant differences between the 2 groups in death anxiety. Religiosity was unrelated to death and dying anxiety. Dying anxiety was higher among bereaved mothers than bereaved fathers. Death and dying anxiety were not associated with the length of time since the loss of the child or the nature of the child's death. Results are discussed in light of the difficulties that bereaved parents experience after the loss of their child. Implications for theory, for health and welfare professionals, and for policy are suggested.

  13. National Metal Casting Research Institute final report. Volume 2, Die casting research

    SciTech Connect

    Jensen, D.

    1994-06-01

    Four subprojects were completed: development and evaluation of die coatings, accelerated die life characterization of die materials, evaluation of fluid flow and solidification modeling programs, selection and characterization of Al-based die casting alloys, and influence of die materials and coatings on die casting quality.

  14. Rahmen, Herausforderungen und Visionen für die Unternehmensorganisation

    NASA Astrophysics Data System (ADS)

    Westkämper, Engelbert; Seidel, Bernhard; Bruhn, Manfred; Bahke, Torsten; Klotz, Ulrich; Buck, Hartmut

    Die Produktion trägt entscheidend zur gesamten Wertschöpfung des Landes mit mehr als einem Drittel aller Beschäftigten bei. Die direkte Wertschöpfung ist dabei für ein rohstoff- und energiearmes Land allein durch Veredelung und technisches Know-how sowie durch die Herstellung von Produkten für den Binnen- und Weltmarkt möglich.

  15. Thermal Hotspots in CPU Die and It's Future Architecture

    NASA Astrophysics Data System (ADS)

    Wang, Jian; Hu, Fu-Yuan

    Owing to the increasing core frequency and chip integration and the limited die dimension, the power densities in CPU chip have been increasing fastly. The high temperature on chip resulted by power densities threats the processor's performance and chip's reliability. This paper analyzed the thermal hotspots in die and their properties. A new architecture of function units in die - - hot units distributed architecture is suggested to cope with the problems of high power densities for future processor chip.

  16. The duty to die and the burdensomeness of living.

    PubMed

    Cholbi, Michael

    2010-10-01

    This article addresses the question of whether the arguments for a duty to die given by John Hardwig, the most prominent philosophical advocate of such a duty, are sound. Hardwig believes that the duty to die is relatively widespread among those with burdensome illnesses, dependencies, or medical conditions. I argue that although there are rare circumstances in which individuals have a duty to die, the situations Hardwig describes are not among these. After reconstructing Hardwig's argument for such a duty, highlighting his central premise that ill, dependent, or aged individuals can impose unfair burdens upon others by continuing to live, I clarify precisely what Hardwig intends by his thesis that many of us have a duty to die. I then show that an important disanalogy exists between an uncontroversial example in which an individual has a duty to die and the situations in which Hardwig proposes individuals have a duty to die. More specifically, in situations where a duty to die exists, an individual's having a duty to die logically implies that those she burdens have a right to kill that individual in self-defense. I then suggest that the burdens that ill, dependent, or aged individuals impose on their families, loved ones, or caregivers do not constitute the kind of threat that warrants the latter killing the former in self-defense. Hence, the duty to die is much rarer than Hardwig supposes.

  17. Nursing experience and the care of dying patients.

    PubMed

    Dunn, Karen S; Otten, Cecilia; Stephens, Elizabeth

    2005-01-19

    To examine relationships among demographic variables and nurses attitudes toward death and caring for dying patients. Descriptive and correlational. Two metropolitan hospitals in Detroit, MI. 58 RNs practicing in oncology and medical/surgical nursing. The majority was female and white, with a mean age of 41 years. Completed survey of three measurement tools: a demographic survey, Frommelt Attitudes Toward Care of the Dying (FATCOD) Scale, and Death Attitude Profile Revised (DAP-R) Scale. Of 60 surveys distributed, 58 were completed and returned. Past experiences (level of education and death training), personal experiences (age, race, religion, and attitudes toward death), professional experiences (months or years of nursing experience and the percentage of time spent in contact with terminally ill or dying patients), and attitudes toward caring for dying patients. Most respondents demonstrated a positive attitude about caring for dying patients. Nurses who reported spending a higher percentage of time in contact with terminally ill or dying patients reported more positive attitudes. No significant relationship was found between nurses attitudes toward death and nurses attitudes about caring for dying patients. Statistically significant relationships were found among certain demographic variables, DAP-R subscales, and FATCOD Scale. Regardless of how the nurses felt about death, providing professional and quality care to dying patients and their families was salient. Developing continuing education programs that teach effective coping strategies to prevent death anxiety and identifying barriers that can make caring for dying patients difficult may make the journey from novice to expert nurse a gratifying and rewarding experience.

  18. MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), DETAIL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), DETAIL SHOWING INSCRIPTION ON FRONT ELEVATION. VIEW TO NORTHEAST. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  19. Assisted dying - should the UK change its stance?

    PubMed

    Gordon, Daniel; Raphael, Claire E; Vassiliou, Vassilios

    2015-04-01

    Along with an increasing interest in assisted dying by many European and North American countries, some of which have already modified their existing laws to accommodate this, the interest in assisted dying in the UK has increased once again following Lord Falconer's Assisted Dying for the Terminally Ill Bill. Drawing on examples from countries where similar assisted dying laws are already in place, this article analyses and contextualises the proposed bill and discusses its potential pitfalls and benefits for the UK. © The European Society of Cardiology 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  20. "Dying is dying, that's all": Structural violence and cultural projects in Malawian AIDS proverbs.

    PubMed

    Hayes, Nicole C

    2015-01-01

    This paper examines three Malawian proverbs about AIDS: "AIDS came for people", "Dying is dying, that's all" and "It's in the flour". Proverbs permit Malawians to discuss the otherwise taboo topic of AIDS because they offer a special register and perform a footing shift, a rhetorical manoeuvre that allows the speaker to attribute problematic speech to someone else. The proverbs under consideration convey a sense of powerless in the face of the AIDS epidemic, which is an indicator of the effects of structural violence on the everyday lives of most Malawians. Despite the aura of timeless tradition generally conveyed by proverbs, the author argues that individual Malawians are actually using AIDS proverbs to align themselves with the pursuit of gendered cultural projects, such as multiple concurrent partner sex and transactional sex, which are not traditional at all.

  1. ["When the soul is depleted, the body dies". Dying and death on the island Nias/Indonesia].

    PubMed

    Klasen, H

    1993-11-01

    In our society death and dying are largely displaced from everyday experiences. Since old rites and traditions seem antiquated and new behavioral patterns haven't yet developed, interaction with dying persons is ruled by helplessness and speechlessness. This article describes death and dying on the islands of Nias/Indonesia, where a big celebration is held before someone is dying. Relatives keep close physical contact to the dying person. Rites and Customs finally help the bereaved to structure their time of mourning and to express their grief in a socially accepted way. Thus the adat (custom, tradition) is not only supporting the dying person, but also helps the survivors to cope with their loss.

  2. L-connect routing of die surface pads to the die edge for stacking in a 3D array

    DOEpatents

    Petersen, Robert W.

    2000-01-01

    Integrated circuit chips and method of routing the interface pads from the face of the chip or die to one or more sidewall surfaces of the die. The interconnection is routed from the face of the die to one or more edges of the die, then routed over the edge of the die and onto the side surface. A new pad is then formed on the sidewall surface, which allows multiple die or chips to be stacked in a three-dimensional array, while enabling follow-on signal routing from the sidewall pads. The routing of the interconnects and formation of the sidewall pads can be carried out in an L-connect or L-shaped routing configuration, using a metalization process such as laser pantography.

  3. Remote thermal neutron die-away measurements to improve Differential Die-Away Analysis

    NASA Astrophysics Data System (ADS)

    Jordan, Kelly A.; Vujic, Jasmina; Gozani, Tsahi

    2007-08-01

    Differential Die-away Analysis (DDAA) is a very effective detection technique of special nuclear material (SNM). It is based on the detection of fast fission neutrons that decay with a time constant characteristic of the thermal neutron that created them. The presence of fast neutrons with this slow die-away time is a positive, sensitive indication of the presence of SNM in the inspected cargo. The thermal decay time of an inspected medium is not known before a DDAA measurement is taken. The choice of when, from the end of a neutron pulse, data are to be acquired must be taken conservatively. If the thermal decay time of an inspected medium can be determined, a priori, then a better estimate of the expected time of separation between the intrinsic detector signal and the fission signal can be achieved. With a better estimate of this time, the choice of times after the end of the pulse to perform signal integration can be optimized. A more optimal choice for this time will result in higher detection sensitivity. This paper describes a method of remotely assessing the thermal die-away properties of an interrogated cargo, and grossly characterizes the class of material being inspected in terms of neutron attenuation and moderation properties.

  4. Die Casting Part Distortion: Prediction and Attenuation

    SciTech Connect

    Dr, R. Allen Miller

    2002-02-12

    The goal of this research was to predict the part deformation and residual stresses after ejection from the die and cooling to room temperature. A finite element model was built to achieve this goal and several modeling techniques were investigated throughout this research. Die-casting is a very complex process and the researchers are faced with a large number of hard to solve physical problems when modeling the process. Several assumptions are made in our simulation model. The first significant assumption is the instantaneous cavity filling. This means that the cavity filling stage is not considered in our model. Considering the cavity filling stage increases the modeling complexity as a result of different flow patterns. expected in the shot sleeve, gate, runner and different cavity features. The flow of gas from the cavity through the vents is another problem that is ignored in our model as a result of this assumption. Our second assumption is that the cast metal has uniform temperature distribution inside the cavity, at the starting point of simulation. This temperature is assumed to be over liquidus limit, i.e. the solid fraction is 0.0% of the cast metal. The third assumption is due to ABAQUS (commercial software used in this research) limitations. ABAQUS cannot deal with multi-phase models; therefore we use solid elements to define the casting instead of multi-phase (liquid/solid) elements. Liquid elements can carry the hydrostatic pressure from the shot sleeve and apply it on the cavity surfaces, while the solid elements do not have this capability. To compensate for this assumption we add the cavity pressure as a boundary condition and apply it on the cavity surface separately from the part. Another issue with this assumption is that, liquid casting can follow the cavity shape when it distorts. With the use of solid elements to represent the casting during its liquid state, it loses this capability to follow the cavity. Several techniques were tested to

  5. Regional ontogeny of New England salt marsh die-off.

    PubMed

    Coverdale, Tyler C; Bertness, Mark D; Altieri, Andrew H

    2013-10-01

    Coastal areas are among the world's most productive and highly affected ecosystems. Centuries of human activity on coastlines have led to overexploitation of marine predators, which in turn has led to cascading ecosystem-level effects. Human effects and approaches to mediating them, however, differ regionally due to gradients in biotic and abiotic factors. Salt marsh die-off on Cape Cod, Massachusetts (U.S.A.), triggered by a recreational-fishing-induced trophic cascade that has released herbivorous crabs from predator control, has been ongoing since 1976. Similar salt marsh die-offs have been reported in Long Island Sound and Narragansett Bay (U.S.A.), but the driving mechanism of these die-offs has not been examined. We used field experiments to assess trophic interactions and historical reconstructions of 24 New England marshes to test the hypotheses that recreational fishing and predator depletion are a regional trigger of salt marsh die-off in New England and that die-offs in Long Island Sound and Narragansett Bay are more recent than those on Cape Cod. Predator depletion was the general trigger of marsh die-off and explained differences in herbivorous crab abundance and the severity of die-off across regions. Die-offs in Long Island Sound and Narragansett Bay are following a trajectory similar to die-off on Cape Cod, but are approximately 20 years behind those on Cape Cod. As a result, die-off currently affects 31.2% (SE 2.2) of low-marsh areas in Long Island Sound and Narragansett Bay, less than half the severity of die-off on Cape Cod. Our results contribute to the growing evidence that recreational fishing is an increasing threat to coastal ecosystems and that studying the effects of human activity at regional scales can provide insight into local effects and aid in early detection and potential remediation. © 2013 Society for Conservation Biology.

  6. The right to die: beyond academia.

    PubMed

    Ramsey, Carole

    2016-03-01

    The world's first legal euthanasia death occurred in the Australian City of Darwin on Sunday 22 September 1996 when Bob Dent ended his life under the Northern Territory's short-lived Rights of the Terminally Ill Act 1995. Dent's death intensified argument about euthanasia in Australia, transforming the debate from a textbook discussion in social ethics into a vigorous and divisive social dispute. The day before he ended his life, Dent dictated a letter, written down by his wife. This description of his experience with terminal illness is graphic-the letter, his last effort to bring the plight of those living with terminal illness to public consciousness. In this paper I outline issues from the perspective of those, who like Bob Dent, the choice to die with dignity is personal and urgent. Rather than approach the issue purely from the theoretical, academic debate therefore, I present aspects that are largely unknown unless the experience of life-denying symptoms becomes real. From these aspects, dilemmas and consequences emerge that are not framed through the academic debate and in this way, I argue for the possibility of a framework that could change the law.

  7. NICMOS PEERS INTO HEART OF DYING STAR

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Egg Nebula, also known as CRL 2688, is shown on the left as it appears in visible light with the Hubble Space Telescope's Wide Field and Planetary Camera 2 (WFPC2) and on the right as it appears in infrared light with Hubble's Near Infrared Camera and Multi-Object Spectrometer (NICMOS). Since infrared light is invisible to humans, the NICMOS image has been assigned colors to distinguish different wavelengths: blue corresponds to starlight reflected by dust particles, and red corresponds to heat radiation emitted by hot molecular hydrogen. Objects like the Egg Nebula are helping astronomers understand how stars like our Sun expel carbon and nitrogen -- elements crucial for life -- into space. Studies on the Egg Nebula show that these dying stars eject matter at high speeds along a preferred axis and may even have multiple jet-like outflows. The signature of the collision between this fast-moving material and the slower outflowing shells is the glow of hydrogen molecules captured in the NICMOS image. The distance between the tip of each jet is approximately 200 times the diameter of our solar system (out to Pluto's orbit). Credits: Rodger Thompson, Marcia Rieke, Glenn Schneider, Dean Hines (University of Arizona); Raghvendra Sahai (Jet Propulsion Laboratory); NICMOS Instrument Definition Team; and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

  8. Transient Heat Conduction Simulation around Microprocessor Die

    NASA Astrophysics Data System (ADS)

    Nishi, Koji

    This paper explains about fundamental formula of calculating power consumption of CMOS (Complementary Metal-Oxide-Semiconductor) devices and its voltage and temperature dependency, then introduces equation for estimating power consumption of the microprocessor for notebook PC (Personal Computer). The equation is applied to heat conduction simulation with simplified thermal model and evaluates in sub-millisecond time step calculation. In addition, the microprocessor has two major heat conduction paths; one is from the top of the silicon die via thermal solution and the other is from package substrate and pins via PGA (Pin Grid Array) socket. Even though the dominant factor of heat conduction is the former path, the latter path - from package substrate and pins - plays an important role in transient heat conduction behavior. Therefore, this paper tries to focus the path from package substrate and pins, and to investigate more accurate method of estimating heat conduction paths of the microprocessor. Also, cooling performance expression of heatsink fan is one of key points to assure result with practical accuracy, while finer expression requires more computation resources which results in longer computation time. Then, this paper discusses the expression to minimize computation workload with a practical accuracy of the result.

  9. Faster, Less Expensive Dies Using RSP Tooling

    NASA Astrophysics Data System (ADS)

    Knirsch, James R.

    2007-08-01

    RSP Tooling is an indirect spray form additive process that can produce production tooling for virtually any forming process and from virtually any metal. In the past 24 months a significant amount of research and development has been performed. This resulted in an increase in the basic metallurgical understanding of what transpires during the rapid solidification of the metal, significant improvements in the production machine up time, ceramic developments that have improved finish, process changes that have resulted in a shorter lead time for tool delivery, and the testing of many new alloys. RSP stands for Rapid Solidification Process and is the key to the superior metallurgical properties that result from the technology. Most metals that are sprayed in the process leave the machine with the same physical properties as the same metal normally achieves through heat treatment and in some cases the properties are superior. Many new applications are being pursued including INVAR tools for aerospace composite materials, and bimetallic tools made from tool steel and beryllium copper for die casting and plastic injection molding. Recent feasibility studies have been performed with tremendous success.

  10. Compassion in Dying v. State of Washington.

    PubMed

    1996-03-06

    The U.S. Court of Appeals for the Ninth Circuit, sitting en banc, affirmed a district court judgment that ruled unconstitutional a Washington statute banning assisted suicide, as applied to competent, terminally ill adults who wish to obtain prescription medication to hasten their deaths. The statute, which was challenged by a group of patients, physicians, and the nonprofit organization Compassion in Dying, was held to be unconstitutional because it violated the due process clause of the U.S. Constitution. The court took into consideration the interests of the state in protecting life, preventing suicides, preventing undue, arbitrary, or unfair influences on an individual's decision to end his life, and ensuring the integrity of the medical profession. These interests were balanced against an individual's strong liberty interest in determining how and when one's life should end. The court recognized this interest after assessing the growing public support for assisted suicide, changes in the causes of death and medical advances, and Supreme Court cases addressing due process liberty interests. The court then determined that the state's interest, which could be protected by adopting sufficient safeguards, did not outweigh the severe burden placed on the terminally ill, and thus the statute as applied was unconstitutional.

  11. Catholic theology and the "right to die".

    PubMed

    Coleman, G D

    1985-03-01

    Catholic moral theology teaches that life is sacred but not absolute. Because life and all activities are subordinated to spiritual ends, it is moral to allow oneself to die when efforts to prolong life will bring no significant benefit and may even make it more difficult to finish life in peace, composure, and union with God. This is not the moral equivalent of suicide, but rather an acceptance of the human condition. In making such a decision, the distinction between morally ordinary and extraordinary means is crucial and based on the patient's total good. Ordinary means are those which offer a reasonable hope of benefit without excessive expense, pain, or other inconvenience. Extraordinary means are those which cannot be obtained without excessive burden or which, if used, would not offer a reasonable hope of benefit. Whether a medical procedure is standard or experimental does not, from a moral viewpoint, affect whether it is ordinary or extraordinary. In Catholic teaching, the patient has the paramount right to decide whether life-preserving measures will be used. If the patient is unable to make this decision, then the family should make it as the patient's representative.

  12. Sonnet XXX: Love, dignity, and dying.

    PubMed

    Ely, E Wesley

    2016-05-01

    All of us in medicine who care for patients who are chronically critically ill, dying of incurable illnesses, will be faced with discussions about the value of their lives and about the appropriateness of ongoing supportive care. Such discussions are good and true, and they must always be done within the context of the sanctity of every human life and the promise of God that we are His children, each and every one of us. In this article, I explore the end-of-life path of a patient with amyotrophic lateral sclerosis (ALS) and the courageous faith that she demonstrated in the face of her illness. I explore with you, the reader, the hard-core conversations that took place at her bedside and their meaning in light of Catholic moral teaching. This story is not meant to indicate that we should always do all interventions at all times for all patients. That would be a teaching counter to Evangelium vitae. This story is meant to help you think through the path of your patients and of you as a physician or other type of healthcare professional in serving your patients. Primum non nocere. Ad majorem Dei gloriam.

  13. [To die alone, a big city problem?].

    PubMed

    Smith, E; Larsen, D F; Rosdahl, N

    2001-05-28

    The question whether being found dead is a problem related to living in a big city was examined by using death certificates from a 3-month period in 1994. The rates of persons found dead were higher for both sexes in the City of Copenhagen than in the rural County of Storstrøm. The age distribution showed that the rate increased with advancing age. The vast majority were found dead in their own home, although the rate was higher in Copenhagen than in Storstrøm. Whereas the manner of death was natural for the majority of cases in both areas, more deaths with an uncertain manner of death were recorded in Copenhagen than in Storstrøm (32% vs 9%). In general, suicide or accident was more often reported in those found dead in the County of Storstrøm than in those in Copenhagen. The cause of death was unknown in 46% of deaths in Copenhagen where 16% had died from external causes, proportions that were 58% and 21%, respectively, in Storstrøm. The rate of legal autopsies was higher in subjects with an uncertain manner of death than in the rest, and was also associated with an age below 40 years. We conclude that being found dead is related to living in a big city, although the reason(s) for this remains unidentified.

  14. Interplay between Beryllium Bonds and Anion-π Interactions in BeR2:C6X6:Y- Complexes (R = H, F and Cl, X = H and F, and Y = Cl and Br).

    PubMed

    Marín-Luna, Marta; Alkorta, Ibon; Elguero, José; Mó, Otilia; Yáñez, Manuel

    2015-05-29

    A theoretical study of the beryllium bonds in BeR2:C6X6 (R = H, F, Cl and X = H and F) has been carried out by means of MP2/aug'-cc-pVDZ computational methods. In addition, the ternary complexes BeR2:C6X6:Y- (Y = Cl and Br) have been analyzed. Geometric, energetic and electronic aspects of the complexes have been taken into account. All the parameters analyzed provide a clear indication of favorable cooperativity in both interactions observed, beryllium bond and aromatic ring:anion interaction.

  15. Optoelektronik Infrarotlicht für die Faseroptik

    NASA Astrophysics Data System (ADS)

    Drach, Volker

    2003-07-01

    Die Eigenschaften der kondensierten Materie sind durch die elektronische Bandstruktur bestimmt. Daher sind sie in Raumladungszonen an Oberflächen abhängig von der Ladungsdichte. Ein Team des Forschungszentrums Karlsruhe machte sich nun diesen Effekt zu Nutze und induzierte in metallischen Nanostrukturen durch eine elektrische Spannung reversible Änderungen der makroskopischen Eigenschaften [1].

  16. Die Materials for Critical Applications and Increased Production Rates

    SciTech Connect

    David Schwam; John Wallace; Sebastian Birceanu

    2002-11-30

    Die materials for aluminum die-casting need to be resistant to heat checking, and have good resistance to washout and to soldering in a fast flow of molten aluminum. To resist heat checking, die materials should have a low coefficient of thermal expansion, high thermal conductivity, high hot yield strength, good temper softening resistance, high creep strength, and adequate ductility. To resist the washout and soldering, die materials should have high hot hardness, good temper resistance, low solubility in molten aluminum and good oxidation resistance. It is difficult for one material to satisfy with all above requirements. In practice, H13 steel is the most popular material for aluminum die casting dies. While it is not an ideal choice, it is substantially less expensive to use than alternative materials. However, in very demanding applications, it is sometimes necessary to use alternative materials to ensure a reasonable die life. Copper-base, nickel-base alloys and superalloys, titanium-,molybdenum-, tungsten-base alloys, and to some extent yttrium and niobium alloys, have all been considered as potential materials for demanding die casting applications. Most of these alloys exhibit superior thermal fatigue resistance, but suffer from other shortcomings.

  17. Death and Dying Anxiety among Bereaved and Nonbereaved Elderly Parents

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Tinsky-Roimi, Tal

    2011-01-01

    This study examines differences in death and dying anxiety between bereaved and nonbereaved elderly Israeli parents, as well as correlates of these factors among bereaved parents. A total of 97 parents (49 bereaved, 48 nonbereaved) completed measures of death and dying anxiety and religiosity. Bereaved parents reported significantly higher dying…

  18. Personality Correlates of the Fear of Death and Dying Scale.

    ERIC Educational Resources Information Center

    Loo, Robert

    1984-01-01

    Examined personality dimensions of the Fear of Death and Dying Scale compared to the Eysenck Personality Questionnaire in a study of 88 students. Findings supported the validity of the Fear of Death and Dying Scale and its independence of social desirability. (JAC)

  19. The Myriad Strategies for Seeking Control in the Dying Process

    ERIC Educational Resources Information Center

    Schroepfer, Tracy A.; Noh, Hyunjin; Kavanaugh, Melinda

    2009-01-01

    Purpose: This study explored the role control plays in the dying process of terminally ill elders by investigating the aspects of the dying process over which they seek to exercise control, the strategies they use, and whether they desire to exercise more control. Design and Methods: In-depth face-to-face interviews were conducted with 84…

  20. The Myriad Strategies for Seeking Control in the Dying Process

    ERIC Educational Resources Information Center

    Schroepfer, Tracy A.; Noh, Hyunjin; Kavanaugh, Melinda

    2009-01-01

    Purpose: This study explored the role control plays in the dying process of terminally ill elders by investigating the aspects of the dying process over which they seek to exercise control, the strategies they use, and whether they desire to exercise more control. Design and Methods: In-depth face-to-face interviews were conducted with 84…

  1. Can We Humanize Dying in the General Hospital?

    ERIC Educational Resources Information Center

    Fleming, Stephen

    This paper reviews the literature on the behavior and attitudes of medical-nursing personnel toward the dying person and illustrates the frequent conflict between hospital staff and the needs of dying. Inner perturbation stemming from feelings of vicarious suffering, vicarious disintegration, or personal anxiety about death, education deficiencies…

  2. Characterization of die drool sample produced by HDPE melt extrusion

    NASA Astrophysics Data System (ADS)

    Musil, Jan; Zatloukal, Martin

    2013-04-01

    In this work, flow induced molecular weight fractionation experiment was performed for HDPE polymer on specially designed laboratory extrusion setup. Die drool sample, accumulated at the die exit face, together with virgin pellets were consequently characterized experimentally by gel permeable chromatography, differential scanning calorimetry and rheology as well as theoretically by recently proposed generalized Newtonian model.

  3. Death and Dying Anxiety among Elderly Arab Muslims in Israel

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Gigini, Ibrahim

    2010-01-01

    Death and dying anxiety were examined among elderly Arab Muslims in Israel. A total of 145 people aged 60 and over were interviewed using a standardized questionnaire. Nursing home residents reported higher death anxiety than others; women and uneducated participants reported greater levels of fear of death and dying than others. There were no…

  4. Potato Early Dying: Molecular Perspectives on Pathogenicity and Host Resistance

    USDA-ARS?s Scientific Manuscript database

    Potato early dying has not received the reputation of being a particularly devastating disease of potato. However, the interaction between the vascular fungus Verticillium dahliae and the root lesion nematode Pratylenchus penetrans to form the early dying complex makes studying this disease very in...

  5. Death and Dying Anxiety among Elderly Arab Muslims in Israel

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Gigini, Ibrahim

    2010-01-01

    Death and dying anxiety were examined among elderly Arab Muslims in Israel. A total of 145 people aged 60 and over were interviewed using a standardized questionnaire. Nursing home residents reported higher death anxiety than others; women and uneducated participants reported greater levels of fear of death and dying than others. There were no…

  6. Death and Dying Anxiety among Bereaved and Nonbereaved Elderly Parents

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Tinsky-Roimi, Tal

    2011-01-01

    This study examines differences in death and dying anxiety between bereaved and nonbereaved elderly Israeli parents, as well as correlates of these factors among bereaved parents. A total of 97 parents (49 bereaved, 48 nonbereaved) completed measures of death and dying anxiety and religiosity. Bereaved parents reported significantly higher dying…

  7. A Study of the Training of Tool and Die Makers.

    ERIC Educational Resources Information Center

    Horowitz, Morris A.; Herrnstadt, Irwin L.

    To develop and test a methodology which would help determine the combination of education, training, and experience that is most likely to yield highly qualified workers in specific occupations, the tool and die maker trade was selected for examination in the Boston Metropolitan Area. Tool and die making was chosen because it is a clearly…

  8. 5 Ways to Cope When a Loved One Dies

    MedlinePlus

    ... Can I Help Someone Who's Being Bullied? Volunteering 5 Ways to Cope When a Loved One Dies KidsHealth > For Teens > 5 Ways to Cope When a Loved One Dies Print A A A en español 5 ideas para superar la muerte de un ser ...

  9. Herschel und die Zukunft der Fern-Infrarot-Astronomie

    NASA Astrophysics Data System (ADS)

    Linz, Hendrik

    2015-06-01

    Schon lange ist die beobachtende Astronomie den engen Grenzen des optisch Sichbaren entwachsen und hat fast alle Bereiche des elektromagnetischen Spektrums für sich dienstbar gemacht. Im sogenannten nahen und mittleren Infrarot (Wellenlängen zwischen 1-30 μm) sowie im Millimeter- und Radio-Regime (Wellenlängen zwischen 1 mm und 10 m) ist die Erdatmosphäre relativ gut durchlässig für elektromagnetische Signale oder hat zumindest eine Vielzahl von spektral begrenzten Transmissionsfenstern, die astronomische Beobachtungen zumindest von höheren Bergen aus möglich machen. Allerdings ist das sogenannte Ferne Infrarot (FIR, 30-300 μm Wellenlänge) von der Erde aus fast völlig unzugänglich für astronomische Beobachtungen. Selbst für die besten Beobachtungsplätze der Erde bleibt die atmosphärische Transmission durch die immense Wasserdampf- Absorption auf ein absolutes Minimum beschränkt. Jedoch erlaubt uns das FIR Zugang zu Informationen, die sehr nützlich sind für die astrophysikalische Forschung und komplementär zu anderen Wellenlängen-Bereichen.

  10. Living and Dying: A Window on (Christian) Children's Spirituality

    ERIC Educational Resources Information Center

    Champagne, Elaine

    2008-01-01

    Faith and beliefs about living and dying are fundamental constituents of spiritual development. However, children are seldom asked to talk about their experiences of life and death. This article has a twofold purpose. It first describes children's expressions on living and dying, as heard during a newly developed programme which encourages…

  11. Thoughts about Death and Dying in an African Sample.

    ERIC Educational Resources Information Center

    Gijana, E. W. M.; And Others

    1990-01-01

    Examined attitudes toward death and dying among 163 Xhosa-speaking children and adults in South Africa. Found age, gender, belief in life after death, educational level, and exposure to death and dying were critical factors in formation of attitudes. Findings were similar to those from previous studies in African and western societies. (Author/NB)

  12. Heat Transfer Characteristics of Billet/Die Interface and Measures to Relieve Thermal Stress for Hot Forging Die

    NASA Astrophysics Data System (ADS)

    Lu, Baoshan; Wang, Leigang; Geng, Zhe; Huang, Yao

    2017-07-01

    The interfacial heat transfer coefficient (IHTC) shows the heat transfer capacity at the billet/die interface during the hot forming process, which affects the temperature gradient in the die that may potentially induce high thermal stress. Consequently, this determines the service life of the die. In this paper, a set of experimental equipments were used to identify the IHTC and the upsetting test of superalloy Inconel718 (GH4169) was carried out on the hot flat die to evaluate the IHTC characteristics after the billet heating and die preheating temperature, holding time, and billet deformation rate. The results indicated that the billet heating temperature has a minimal role in IHTC but the other components have a great impact on IHTC. Among them, the billet deformation rate has influenced the IHTC the most. In the die preheating temperature ranging from 150°C to 400°C, it was found that the preheating temperature was proportional to IHTC. A high preheating temperature that leads to a high IHTC was found unfavorable in relieving the die surface thermal stress, and also weakened the die hardness and strength. The IHTC declined with the increase in the holding time as a result of the billet oxidation. Based on these findings, the composite ceramic and polymetallic heat-resistant coatings on the die surface were prepared, respectively, to relieve the thermal stress of die surface by reducing IHTC. It showed that both of the treated dies could effectively reduce the IHTC, blocking the transferred heat from the hot billet and making it applicable to the different hot forging events.

  13. How is death and dying addressed in introductory psychology textbooks?

    PubMed

    Coppola, K M; Strohmetz, David B

    2002-10-01

    Although psychologists have conducted a great deal of research on death and dying, little is known about how topics related to death and dying are introduced in psychology courses. We analyzed the amount and breadth of coverage given to topics related to death and dying in 28 introductory psychology textbooks published between 1995 and 2000. We coded for number of words included, the types of topics discussed, and authors cited. All textbooks included some information about death and dying, most frequently, suicide. Little consistency was found in references cited. We recommend that future textbooks include information to help students explore their own death attitudes, as well as providing more theory and empirical research findings on aspects of death and dying.

  14. Will the UK Supreme Court allow assisted dying?

    PubMed

    Griffith, Richard

    MPs overwhelmingly voted against passing the Assisted Dying Bill into law in September 2015. The Bill was defeated by a majority of 212, despite the heartfelt pleas of many MPs to pass it into law. The size of the defeat means that it is unlikely that Parliament will consider a similar law for many years. Yet many considered the Bill their last opportunity to make assisted dying lawful. There is, however, one further possible way assisted dying could become lawful in the UK--and that would be where the Supreme Court allowed it. In this article, the author reviews the Supreme Court's decision in R (on the application of Nicklinson v Ministry of Justice [2014] and considers how likely it is that the Supreme Court will now sanction assisted dying following Parliament's refusal to enact an assisted dying law.

  15. Including die and press deformations in sheet metal forming simulations

    NASA Astrophysics Data System (ADS)

    Pilthammar, Johan; Sigvant, Mats; Kao-Walter, Sharon

    2016-08-01

    Structural analysis, in Abaqus, of a stamping die and subsequent morphing of the tool surfaces in AutoForm were performed to improve a sheet metal forming simulation. First, the tool surfaces of the XC90 rear door inner were scanned. They were not matching when the die was unloaded and could therefore not give any satisfying results in sheet metal forming simulations. Scanned surface geometries were then added to a structural FE-model of the complete stamping die and some influential parts of the production press. The structural FE- model was analysed with Abaqus to obtain the structural deformations of the die. The calculated surface shapes were then transferred to AutoForm where a forming simulation was performed. Results from the different sheet metal forming simulations were compared to measured draw in curves and showed a substantial increase in accuracy and ability to analyse dies in running production when the morphed surfaces were used.

  16. Analyse der Störfestigkeit nichtlinearer Schaltungen gegenüber leitungsgebundenen elektromagnetischen Störungen mit multi-input Wiener/Hammerstein-Modellen

    NASA Astrophysics Data System (ADS)

    Stegemann, S.; John, W.; Mathis, W.

    2012-09-01

    In dieser Arbeit wird der Einfluss von leitungsgebundenen Störungen untersucht, welche in einen beliebigen Eingang (Signaleingang, Spannungsversorgung, Masse-Potenzial, etc.) einer Analogschaltung einkoppeln. Die zu untersuchende Schaltung wird dazu durch einen Wiener/Hammerstein-Ansatz als nichtlineares System mit zwei Eingängen modelliert. Mit Hilfe dieses Blockmodells werden analytische Ausdrücke derjenigen Frequenzanteile bestimmt, die durch Intermodulationen zwischen Stör- und Eingangssignal am Ausgang einer Schaltung entstehen.

  17. Enhancements in Magnesium Die Casting Impact Properties

    SciTech Connect

    David Schwam; John F. Wallace; Yulong Zhu; Srinath Viswanathan; Shafik Iskander

    2000-06-30

    % in AM50 to over 9% in AZ91, more of the intermetallic Mg17Al12 is formed in the microstructure. For instance, for 15 increase in the aluminum content from AM50 to AM60, the volume fraction of eutectic present in the microstructure increases by 35%! Eventually, the brittle Mg17Al12 compound forms an interconnected network that reduces ductility and impact resistance. The lower aluminum in AM50 and AM60 are therefore a desirable feature in applications that call for higher impact resistance. Further improvement in impact resistance depends on the processing condition of the casting. Sound castings without porosity and impurities will have better mechanical properties. Since magnesium oxidizes readily, good melting and metal transfer practices are essential. The liquid metal has to be protected from oxidation at all times and entrainment of oxide films in the casting needs to be prevented. In this regard, there is evidence that us of vacuum to evacuate air from the die casting cavity can improve the quality of the castings. Fast cooling rates, leading to smaller grain size are beneficial and promote superior mechanical properties. Micro-segregation and banding are two additional defect types often encountered in magnesium alloys, in particular in AZ91D. While difficult to eliminate, segregation can be minimized by careful thermal management of the dies and the shot sleeve. A major source of segregation is the premature solidification in the shot sleeve. The primary solid dendrites are carried into the casting and form a heterogeneous structure. Furthermore, during the shot, segregation banding can occur. The remedies for this kind of defects include a hotter shot sleeve, use of insulating coatings on the shot sleeve and a short lag time between pouring into the shot sleeve and the shot.

  18. [Why do Hungarian men die early?].

    PubMed

    Kopp, Mária; Skrabski, Arpád

    2009-09-01

    The mortality rate for 40- 69-year-old men was 12.2/thousand males of corresponding age in 1960 and 16.2 in 2005: it increased by 33%, while among 40- 69-year-old women it decreased from 9.6 0/thousand females of corresponding age to 7.8. The aim of the present follow up study was to analyze which psychosocial risk factors might explain the high premature mortality rates among Hungarian men. Participants in the Hungarostudy 2002 study, a nationally representative sample, 1130 men and 1529 women were contacted again in the follow up study in 2006, who in 2002 were between the age of 40-69 years. By 2006, 99 men (8.8%) and 53 women (3.5%) died in this age group. Socio-economic, psychosocial and work-related measures, self-rated health, chronic disorders, depressive symptoms (BDI), WHO well-being, negative affect, self-efficacy, meaning in life and health behavioral factors were included in the analysis. After adjustment according to smoking, alcohol abuse, BMI, education and age, a number of variables were significant predictors of mortality only in men: low education, low subjective social status, low personal and family income, insecurity of work, no control in work, severe depression, no meaning in life, low social support from spouse, low social support from child. Socio-economic and work related risk factors predicted only male premature death. Among women dissatisfaction with personal relations was the most important risk factor. Among men depression seems to mediate between these chronic stress factors and premature death.

  19. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  20. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  1. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  2. Polychlorinated biphenyl quinone induces oxidative DNA damage and repair responses: The activations of NHEJ, BER and NER via ATM-p53 signaling axis

    SciTech Connect

    Dong, Hui; Shi, Qiong; Song, Xiufang; Fu, Juanli; Hu, Lihua; Xu, Demei; Su, Chuanyang; Xia, Xiaomin; Song, Erqun; Song, Yang

    2015-07-01

    Our previous studies demonstrated that polychlorinated biphenyl (PCB) quinone induced oxidative DNA damage in HepG2 cells. To promote genomic integrity, DNA damage response (DDR) coordinates cell-cycle transitions, DNA repair and apoptosis. PCB quinone-induced cell cycle arrest and apoptosis have been documented, however, whether PCB quinone insult induce DNA repair signaling is still unknown. In this study, we identified the activation of DDR and corresponding signaling events in HepG2 cells upon the exposure to a synthetic PCB quinone, PCB29-pQ. Our data illustrated that PCB29-pQ induces the phosphorylation of p53, which was mediated by ataxia telangiectasia mutated (ATM) protein kinase. The observed phosphorylated histone H2AX (γ-H2AX) foci and the elevation of 8-hydroxy-2′-deoxyguanosine (8-OHdG) indicated that DDR was stimulated by PCB29-pQ treatment. Additionally, we found PCB29-pQ activates non-homologous end joining (NHEJ), base excision repair (BER) and nucleotide excision repair (NER) signalings. However, these repair pathways are not error-free processes and aberrant repair of DNA damage may cause the potential risk of carcinogenesis and mutagenesis. - Highlights: • Polychlorinated biphenyl quinone induces oxidative DNA damage in HepG2 cells. • The elevation of γ-H2AX and 8-OHdG indicates the activation of DNA damage response. • ATM-p53 signaling acts as the DNA damage sensor and effector. • Polychlorinated biphenyl quinone activates NHEJ, BER and NER signalings.

  3. De-tabooing dying control - a grounded theory study

    PubMed Central

    2013-01-01

    Background Dying is inescapable yet remains a neglected issue in modern health care. The research question in this study was “what is going on in the field of dying today?” What emerged was to eventually present a grounded theory of control of dying focusing specifically on how people react in relation to issues about euthanasia and physician-assisted suicide (PAS). Methods Classic grounded theory was used to analyze interviews with 55 laypersons and health care professionals in North America and Europe, surveys on attitudes to PAS among physicians and the Swedish general public, and scientific literature, North American discussion forum websites, and news sites. Results Open awareness of the nature and timing of a patient’s death became common in health care during the 1960s in the Western world. Open dying awareness contexts can be seen as the start of a weakening of a taboo towards controlled dying called de-tabooing. The growth of the hospice movement and palliative care, but also the legalization of euthanasia and PAS in the Benelux countries, and PAS in Montana, Oregon and Washington further represents de-tabooing dying control. An attitude positioning between the taboo of dying control and a growing taboo against questioning patient autonomy and self-determination called de-paternalizing is another aspect of de-tabooing. When confronted with a taboo, people first react emotionally based on “gut feelings” - emotional positioning. This is followed by reasoning and label wrestling using euphemisms and dysphemisms - reflective positioning. Rarely is de-tabooing unconditional but enabled by stipulated positioning as in soft laws (palliative care guidelines) and hard laws (euthanasia/PAS legislation). From a global perspective three shapes of dying control emerge. First, suboptimal palliative care in closed awareness contexts seen in Asian, Islamic and Latin cultures, called closed dying. Second, palliative care and sedation therapy, but not euthanasia

  4. De-tabooing dying control - a grounded theory study.

    PubMed

    Thulesius, Hans O; Scott, Helen; Helgesson, Gert; Lynöe, Niels

    2013-03-13

    Dying is inescapable yet remains a neglected issue in modern health care. The research question in this study was "what is going on in the field of dying today?" What emerged was to eventually present a grounded theory of control of dying focusing specifically on how people react in relation to issues about euthanasia and physician-assisted suicide (PAS). Classic grounded theory was used to analyze interviews with 55 laypersons and health care professionals in North America and Europe, surveys on attitudes to PAS among physicians and the Swedish general public, and scientific literature, North American discussion forum websites, and news sites. Open awareness of the nature and timing of a patient's death became common in health care during the 1960s in the Western world. Open dying awareness contexts can be seen as the start of a weakening of a taboo towards controlled dying called de-tabooing. The growth of the hospice movement and palliative care, but also the legalization of euthanasia and PAS in the Benelux countries, and PAS in Montana, Oregon and Washington further represents de-tabooing dying control. An attitude positioning between the taboo of dying control and a growing taboo against questioning patient autonomy and self-determination called de-paternalizing is another aspect of de-tabooing. When confronted with a taboo, people first react emotionally based on "gut feelings" - emotional positioning. This is followed by reasoning and label wrestling using euphemisms and dysphemisms - reflective positioning. Rarely is de-tabooing unconditional but enabled by stipulated positioning as in soft laws (palliative care guidelines) and hard laws (euthanasia/PAS legislation). From a global perspective three shapes of dying control emerge. First, suboptimal palliative care in closed awareness contexts seen in Asian, Islamic and Latin cultures, called closed dying. Second, palliative care and sedation therapy, but not euthanasia or PAS, is seen in Europe and North

  5. Where the elderly die: the influence of socio-demographic factors and cause of death on people dying at home.

    PubMed

    Beng, Arthur K L; Fong, Chee Weng; Shum, Eugene; Goh, Cynthia R; Goh, Kee Tai; Chew, Suok Kai

    2009-08-01

    The place of death of the elderly has implications on the overall healthcare delivery system. The aim of this study is to describe where deaths of elderly occur in Singapore and to determine the association of socio-demographic characteristics and the causes of death on dying at home. Data of 10,399 Singapore resident decedents aged 65 years and above in 2006 were obtained from the national Registry of Births and Deaths. Distributions of socio-demographic characteristics and causes of death by place of death were analysed, and associations between socio-demographic characteristics and home death for major causes of death were assessed by logistic regression models controlling for age, gender and ethnic group. Most elderly deaths occurred in hospitals (57%), followed by deaths at home (31%). The proportion of deaths at home increased with age while deaths in hospital declined with age. Significantly more elderly women died at home compared to men. Malay elderly had the highest proportion of home deaths (49%), and the lowest proportion of hospital deaths (47%). Elderly persons who died from stroke were most likely to die at home [odds ratio (OR) 2.8, 95% confidence interval (CI), 2.3-3.3] while those who died from lung and respiratory system diseases were less likely to die at home (OR, 0.7; 95% CI, 0.6-0.8). Elderly people in Singapore die mainly in hospitals. About a third of them die at home. The proportion of decedents dying at home increased with age. Home deaths among the elderly are most likely in those aged 85 years and above, females, Malays, and those who die of stroke.

  6. Fear of dying and inflammation following acute coronary syndrome.

    PubMed

    Steptoe, Andrew; Molloy, Gerard J; Messerli-Bürgy, Nadine; Wikman, Anna; Randall, Gemma; Perkins-Porras, Linda; Kaski, Juan Carlos

    2011-10-01

    Many patients are afraid of dying during acute coronary syndrome (ACS), but the origins and biological correlates of these emotional responses are poorly understood. This study evaluated the prevalence of fear of dying, associations with inflammatory responses during ACS, and later heart rate variability (HRV) and cortisol secretion. Two hundred and eight patients admitted with clinically verified ACS rated their fear of dying on interview in hospital. Plasma tumour necrosis factor (TNF)α was recorded on admission, and HRV and salivary cortisol were assessed 3 weeks later. Intense distress and fear of dying was experienced by 21.7%, with moderate levels in 66.1% patients. Fear of dying was more common in younger, lower socioeconomic status, and unmarried patients. It was positively associated with plasma TNFα on admission after controlling for sociodemographic factors, clinical risk, and pain intensity (adjusted odds = 4.67, 95% C.I. 1.66-12.65). TNFα was associated with reduced HRV 3 weeks later, adjusting for clinical and sociodemographic factors and medication (P = 0.019), while fear of dying was associated with reduced cortisol output (P = 0.004). Intense distress and fear of dying and heightened inflammation may be related manifestations of an acute biobehavioural response to severe cardiac injury, and have implications for prognostically significant biological risk processes.

  7. Optimization of Composition and Heat Treating of Die Steels for Extended Lifetime

    SciTech Connect

    David Schwam; John F. Wallace; Quanyou Zhou

    2002-01-30

    An ''average'' die casting die costs fifty thousand dollars. A die used in making die cast aluminum engine blocks can cost well over one million dollars. These costs provide a strong incentive for extension of die life. While vacuum quenched Premium Grade H13 dies have become the most widely used in the United States, tool makers and die casters are constantly searching for new steels and heat treating procedures to extend die life. This project was undertaken to investigate the effects of composition and heat treating on die life and optimize these parameters.

  8. Compaction die for forming a solid annulus on a right circular cylinder. [Patent application

    DOEpatents

    Harlow, J.L.

    1981-09-14

    A compacting die is disclosed wherein the improvement comprises providing a screen in the die cavity, the screen being positioned parallel to the side walls of said die and dividing the die cavity into center and annular compartments. In addition, the use of this die in a method for producing an annular clad ceramic fuel material is disclosed.

  9. Experiences of Living and Dying With COPD

    PubMed Central

    Giacomini, M; DeJean, D; Simeonov, D; Smith, A

    2012-01-01

    Executive Summary In July 2010, the Medical Advisory Secretariat (MAS) began work on a Chronic Obstructive Pulmonary Disease (COPD) evidentiary framework, an evidence-based review of the literature surrounding treatment strategies for patients with COPD. This project emerged from a request by the Health System Strategy Division of the Ministry of Health and Long-Term Care that MAS provide them with an evidentiary platform on the effectiveness and cost-effectiveness of COPD interventions. After an initial review of health technology assessments and systematic reviews of COPD literature, and consultation with experts, MAS identified the following topics for analysis: vaccinations (influenza and pneumococcal), smoking cessation, multidisciplinary care, pulmonary rehabilitation, long-term oxygen therapy, noninvasive positive pressure ventilation for acute and chronic respiratory failure, hospital-at-home for acute exacerbations of COPD, and telehealth (including telemonitoring and telephone support). Evidence-based analyses were prepared for each of these topics. For each technology, an economic analysis was also completed where appropriate. In addition, a review of the qualitative literature on patient, caregiver, and provider perspectives on living and dying with COPD was conducted, as were reviews of the qualitative literature on each of the technologies included in these analyses. The Chronic Obstructive Pulmonary Disease Mega-Analysis series is made up of the following reports, which can be publicly accessed at the MAS website at: http://www.hqontario.ca/en/mas/mas_ohtas_mn.html. Chronic Obstructive Pulmonary Disease (COPD) Evidentiary Framework Influenza and Pneumococcal Vaccinations for Patients With Chronic Obstructive Pulmonary Disease (COPD): An Evidence-Based Analysis Smoking Cessation for Patients With Chronic Obstructive Pulmonary Disease (COPD): An Evidence-Based Analysis Community-Based Multidisciplinary Care for Patients With Stable Chronic Obstructive

  10. Understandings of death and dying for people of Chinese origin.

    PubMed

    Hsu, Chiung-yin; O'Connor, Margaret; Lee, Susan

    2009-02-01

    This article introduces the primary beliefs about ancestor worship, Taoism, Confucianism, Buddhism and traditional Chinese medicine that have influenced Chinese people for thousands of years, particularly in relation to death and dying. These cultures and traditions remain important for Chinese people wherever they live. Over a long period, Chinese people have integrated these philosophies and religions to form the basis of their culture and traditions. Although they agree that death is a natural part of the life span, a unique belief about death and dying has emerged among the Chinese from this integration. From this, the people find a significant definition of death and dying.

  11. Treatment-resistant major depressive disorder and assisted dying.

    PubMed

    Schuklenk, Udo; van de Vathorst, Suzanne

    2015-08-01

    Competent patients suffering from treatment-resistant depressive disorder should be treated no different in the context of assisted dying to other patients suffering from chronic conditions that render their lives permanently not worth living to them. Jurisdictions that are considering, or that have, decriminalised assisted dying are discriminating unfairly against patients suffering from treatment-resistant depression if they exclude such patients from the class of citizens entitled to receive assistance in dying. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  12. Einführung in die Renaturierungsökologie

    NASA Astrophysics Data System (ADS)

    Zerbe, Stefan; Wiegleb, Gerhard; Rosenthal, Gert

    Durch die übernutzung der Naturressourcen sind heute weltweit viele natürliche wie auch durch Kultur entstandene ökosysteme und Landschaften in ihren Funktionen und Leistungen stark beeinträchtigt oder sogar völlig zerstört. Bereits vor mehr als einem Jahrzehnt konstatierte (1995), dass ca. 45 % der terrestrischen Landoberfläche nur eine reduzierte Kapazität für die zukünftige Landnutzung haben. Als Grund hob er eine in der Vergangenheit nicht nachhaltige Landbewirtschaftung hervor. Mit einer gezielten Renaturierung der betroffenen ökosysteme soll dieser Trend umgekehrt werden (Harris und van Diggelen 2006). Vor diesem Hintergrund ist die ökosystemrenaturierung (ecological restoration) wichtiger Bestandteil der Planungs- und Naturschutzpraxis in Mitteleuropa und die Renaturierungsökologie (restoration ecology) zu einer eigenen wissenschaftlichen Arbeitsrichtung geworden.

  13. Warum Normen für die Instandhaltung?

    NASA Astrophysics Data System (ADS)

    Tschuschke, Werner E.

    Viele kennen Normen wie Konstruktionsnormen, in denen z. B. der Außendurchmesser, die Steigung, der Flankenwinkel und andere Maße eines Gewindes festgelegt sind. Es gibt Prüfnormen aber auch Normen eines Managementsystems wie des Qualitätsmanagements in der DIN-EN-ISO-9000-Familie. Aber warum Normen für die Instandhaltung? Begonnen hat es mit der DIN 31051, die 1985 veröffentlicht wurde. Es war die erste Instandhaltungsnorm weltweit und sie wurde von der Schweiz und Österreich übernommen. In ihr sind Begriffe der Instandhaltung, Grundlagen zum Abnutzungsprozess und Aktivitäten der Instandhaltung beschrieben. Es wurde der Begriff Instandsetzung statt Reparatur publiziert: Nicht mehr Flickschustern sondern einen funktionsfähigen Anlagenzustand möglichst erhalten.

  14. Injury patterns in patients who "talk and die".

    PubMed

    Kim, J; Kemp, S; Kullas, K; Hitos, K; Dexter, M A

    2013-12-01

    Despite advances in the quality of and access to cerebral imaging, patients with mild head injuries still deteriorate and die in neurotrauma units. The term "talk and die" was first used by Reilly et al. to describe a subset of patients with head injuries who died following what was initially thought to be only a mild traumatic brain injury. A retrospective review of a database from a major Australian trauma center was performed to identify 25 patients who met the "talk and die" criteria between January 2000 and December 2009. The medical records of these patients and their imaging studies were analyzed to identify potentially preventable factors and injury patterns in this group of patients. The factors analyzed included age, modality of injury, therapeutic narcotic usage, seizures, and hyponatremia. Two groups of patients are described herein based on intracranial pathology, with statistically significant differences in age, mechanism, and coagulopathy identified. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in ...

  16. REAR ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    REAR ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), SECTION 43A, LOOKING SOUTH ALONG EAST OBELISK ROAD. VIEW TO SOUTH. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  17. FRONT ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FRONT ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), SECTION 43A, WITH HEADSTONES IN FOREGROUND. VIEW TO NORTHEAST. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  18. 33. HISTORIC PLAQUE MARKING WHERE JOHNSTON DIED, ADJACENT TO PATHWAY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. HISTORIC PLAQUE MARKING WHERE JOHNSTON DIED, ADJACENT TO PATHWAY WITH CONCRETE CULVERT LEADING NORTH OUT OF RAVINE TOWARD JOHNSTON MEMORIAL SITE. VIEW NW. - Shiloh National Military Park Tour Roads, Shiloh, Hardin County, TN

  19. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in...

  20. Haven Peck's Legacy in "A Day No Pigs Would Die."

    ERIC Educational Resources Information Center

    Hartvigsen, M. Kip; Hartvigsen, Christen Brog

    1985-01-01

    Reviews Robert Newton Peck's "A Day No Pigs Would Die," pointing out the values of a courageous display of duty to others and to tasks at hand, and a vision that appreciates the natural order of life. (EL)

  1. Chemical strategies for die/wafer submicron alignment and bonding.

    SciTech Connect

    Martin, James Ellis; Baca, Alicia I.; Chu, Dahwey; Rohwer, Lauren Elizabeth Shea

    2010-09-01

    This late-start LDRD explores chemical strategies that will enable sub-micron alignment accuracy of dies and wafers by exploiting the interfacial energies of chemical ligands. We have micropatterned commensurate features, such as 2-d arrays of micron-sized gold lines on the die to be bonded. Each gold line is functionalized with alkanethiol ligands before the die are brought into contact. The ligand interfacial energy is minimized when the lines on the die are brought into registration, due to favorable interactions between the complementary ligand tails. After registration is achieved, standard bonding techniques are used to create precision permanent bonds. We have computed the alignment forces and torque between two surfaces patterned with arrays of lines or square pads to illustrate how best to maximize the tendency to align. We also discuss complex, aperiodic patterns such as rectilinear pad assemblies, concentric circles, and spirals that point the way towards extremely precise alignment.

  2. Laser and focused ion beam combined machining for micro dies.

    PubMed

    Yoshida, Y; Okazaki, W; Uchida, T

    2012-02-01

    We have developed a laser and focused ion beam (FIB) compound process for press mold dies of a micro lens array (MLA) and a micro needle array (MNA) in a glassy carbon (GC). The press mold die of the MLA was roughly fabricated by UV-YAG laser. After this process, we finished this surface by scanning FIB. As a result, higher accuracy and good roughness of surface profile can be realized. An optical glass is used to confirm the shape of lens. Moreover, we fabricated 6 × 6 through-holes in the GC by the spiral drilling in addition to the focus position movement of the UV laser for press mold die of the MNA. After the FIB process, we were able to make the needle die of surface and hole wall roughness less than 0.9 μm. A silicon rubber is used to confirm the shape of the holes.

  3. 8. INTERIOR BEADED WALL BOARDING SHOWING TRIAL MARKS FROM DIES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. INTERIOR BEADED WALL BOARDING SHOWING TRIAL MARKS FROM DIES MADE IN CARPENTER'S SHOP Ph: Jack E, Boucher - March 1961 - Joseph Carpenter Silversmith Shop, 71 East Town Street, Norwichtown, New London County, CT

  4. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in...

  5. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in ...

  6. Method and Apparatus for Die Forming Metal Sheets and Extrusions.

    DTIC Science & Technology

    of a variety of die blocks for introducing a variety of angled joggles in the metal sheets and extrusions. Relatively low melting temperature material is used for the castings. Keywords: Patents; Aircraft parts. (kt)

  7. Characterization of Spray Lubricants for the Die Casting Process

    SciTech Connect

    Sabau, Adrian S

    2008-01-01

    During the die casting process, lubricants are sprayed in order to cool the dies and facilitate the ejection of the casting. The cooling effects of the die lubricant were investigated using Thermogravimetric analysis (TGA), heat flux sensors (HFS), and infrared imaging. The evolution of the heat flux and pictures taken using a high speed infrared camera revealed that lubricant application was a transient process. The short time response of the HFS allows the monitoring and data acquisition of the surface temperature and heat flux without additional data processing. A similar set of experiments was performed with deionized water in order to assess the lubricant effect. The high heat flux obtained at 300 C was attributed to the wetting and absorbant properties of the lubricant. Pictures of the spray cone and lubricant flow on the die were also used to explain the heat flux evolution.

  8. Grote Reber, Radio Astronomy Pioneer, Dies

    NASA Astrophysics Data System (ADS)

    2002-12-01

    Grote Reber, one of the earliest pioneers of radio astronomy, died in Tasmania on December 20, just two days shy of his 91st birthday. Reber was the first person to build a radio telescope dedicated to astronomy, opening up a whole new "window" on the Universe that eventually produced such landmark discoveries as quasars, pulsars and the remnant "afterglow" of the Big Bang. His self- financed experiments laid the foundation for today's advanced radio-astronomy facilities. Grote Reber Grote Reber NRAO/AUI photo "Radio astronomy has changed profoundly our understanding of the Universe and has earned the Nobel Prize for several major contributions. All radio astronomers who have followed him owe Grote Reber a deep debt for his pioneering work," said Dr. Fred Lo, director of the National Radio Astronomy Observatory (NRAO). "Reber was the first to systematically study the sky by observing something other than visible light. This gave astronomy a whole new view of the Universe. The continuing importance of new ways of looking at the Universe is emphasized by this year's Nobel Prizes in physics, which recognized scientists who pioneered X-ray and neutrino observations," Lo added. Reber was a radio engineer and avid amateur "ham" radio operator in Wheaton, Illinois, in the 1930s when he read about Karl Jansky's 1932 discovery of natural radio emissions coming from outer space. As an amateur operator, Reber had won awards and communicated with other amateurs around the world, and later wrote that he had concluded "there were no more worlds to conquer" in radio. Learning of Jansky's discovery gave Reber a whole new challenge that he attacked with vigor. Analyzing the problem as an engineer, Reber concluded that what he needed was a parabolic-dish antenna, something quite uncommon in the 1930s. In 1937, using his own funds, he constructed a 31.4-foot-diameter dish antenna in his back yard. The strange contraption attracted curious attention from his neighbors and became

  9. Consortia for Known Good Die (KGD). Phase 1

    DTIC Science & Technology

    1994-02-01

    were being actively developed for test and bum-in of bare die or minimally packaged die. The companies plan to make the technology available to the...lifetime (up to the consensus single best technology for making temporary 1000 cycle limit) reducing cost. Cost impact of caner probe contact to...model and develop the system specification for Im oe _ side 40O extensions to make this a useful tool for industrial users 2 CPU 10 mm on each side 2001

  10. A discussion on the proposed assisted dying law.

    PubMed

    Griffith, Richard

    2014-08-01

    Having failed in their attempt to persuade the United Kingdom Supreme Court to allow health professionals to participate in assisting patients to end their lives, the hopes of campaigners now lie with Parliament passing Lord Falconer's private members' Assisted Dying Bill. This article reviews the Supreme Court's decision in R (on the application of Nicklinson) v Ministry of Justice [2014] and considers how likely it is that Parliament will enact an assisted dying law.

  11. Cost analysis of medical assistance in dying in Canada.

    PubMed

    Trachtenberg, Aaron J; Manns, Braden

    2017-01-23

    The legalization of medical assistance in dying will affect health care spending in Canada. Our aim was to determine the potential costs and savings associated with the implementation of medical assistance in dying. Using published data from the Netherlands and Belgium, where medically assisted death is legal, we estimated that medical assistance in dying will account for 1%-4% of all deaths; 80% of patients will have cancer; 50% of patients will be aged 60-80 years; 55% will be men; 60% of patients will have their lives shortened by 1 month; and 40% of patients will have their lives shortened by 1 week. We combined current mortality data for the Canadian population with recent end-of-life cost data to calculate a predicted range of savings associated with the implementation of medical assistance in dying. We also estimated the direct costs associated with offering medically assisted death, including physician consultations and drug costs. Medical assistance in dying could reduce annual health care spending across Canada by between $34.7 million and $138.8 million, exceeding the $1.5-$14.8 million in direct costs associated with its implementation. In sensitivity analyses, we noted that even if the potential savings are overestimated and costs underestimated, the implementation of mdedical assistance in dying will likely remain at least cost neutral. Providing medical assistance in dying in Canada should not result in any excess financial burden to the health care system, and could result in substantial savings. Additional data on patients who choose medical assistance in dying in Canada should be collected to enable more precise estimates of the impact of medically assisted death on health care spending and to enable further economic evaluation. © 2017 Canadian Medical Association or its licensors.

  12. Lived experience of caring for dying patients in emergency room.

    PubMed

    Kongsuwan, Waraporn; Matchim, Yaowarat; Nilmanat, Kittikorn; Locsin, Rozzano C; Tanioka, Tetsuya; Yasuhara, Yuko

    2016-03-01

    Dying often occurs in hospitals and frequently in emergency rooms. Understanding caring for critical and dying patients is necessary for quality nursing. This study described the meaning of nurses' lived experience of caring for critical and dying patients in the emergency rooms. This study was conducted in three emergency rooms of tertiary hospitals in southern Thailand. Twelve nurses met the inclusion criteria: nurses working in emergency room for at least 2 years, and experienced caring for critical and dying patients in an emergency department. Data were collected using in-depth individual interviews. Data transcription and analysis used van Manen's hermeneutic phenomenological approach. Trustworthiness was established following Lincoln and Guba's criteria. Experiences of caring for critical and dying patients revealed four thematic categories: defying death; no time for palliative care; lacking support for family; and privacy for peaceful deaths. These thematic categories reflected van Manen's four lived worlds of body, time, relations and space. The study described the meaning of the experience of caring for critical and dying patients while supporting the development of nursing knowledge for palliative and end-of-life care in emergent settings. Findings of the study influence nursing policies toward enhancing education of nurses regarding palliative and end-of-life care in emergency settings. These findings can also influence the value of caring-healing environments for critical and dying patients and their families. Policies can focus on practice and education of families particularly about end-of-life care for critical and dying patients. © 2016 International Council of Nurses.

  13. Cost analysis of medical assistance in dying in Canada

    PubMed Central

    Trachtenberg, Aaron J.; Manns, Braden

    2017-01-01

    BACKGROUND: The legalization of medical assistance in dying will affect health care spending in Canada. Our aim was to determine the potential costs and savings associated with the implementation of medical assistance in dying. METHODS: Using published data from the Netherlands and Belgium, where medically assisted death is legal, we estimated that medical assistance in dying will account for 1%–4% of all deaths; 80% of patients will have cancer; 50% of patients will be aged 60–80 years; 55% will be men; 60% of patients will have their lives shortened by 1 month; and 40% of patients will have their lives shortened by 1 week. We combined current mortality data for the Canadian population with recent end-of-life cost data to calculate a predicted range of savings associated with the implementation of medical assistance in dying. We also estimated the direct costs associated with offering medically assisted death, including physician consultations and drug costs. RESULTS: Medical assistance in dying could reduce annual health care spending across Canada by between $34.7 million and $138.8 million, exceeding the $1.5–$14.8 million in direct costs associated with its implementation. In sensitivity analyses, we noted that even if the potential savings are overestimated and costs underestimated, the implementation of mdedical assistance in dying will likely remain at least cost neutral. INTERPRETATION: Providing medical assistance in dying in Canada should not result in any excess financial burden to the health care system, and could result in substantial savings. Additional data on patients who choose medical assistance in dying in Canada should be collected to enable more precise estimates of the impact of medically assisted death on health care spending and to enable further economic evaluation. PMID:28246154

  14. [How to intervene effectively with a dying patient].

    PubMed

    Gagné, F L; Robichaud-Ekstrand, S

    1995-02-01

    Nurses are in a strategic position to meet the needs of the dying patient. However, when confronted with death, nurses often utilize avoidance behaviors, such as: tending to the dying patient only if a technique is required; initiating conversations on casual topics or directing the conversation towards the patient's "health"; requesting consults to avoid talking about dying; and unnecessarily overmedicating the patient. This paper explains the rights and needs of the dying patient and describes associated nursing interventions. For example, the dying patient has the primordial right to choose whether or not to receive treatment. For nurses to intervene effectively, they must learn to manage their own emotions relating to death. A strong theoretical understanding of the dying process must be acquired. They must also develop internal strengths and receive help from various resources. By doing so, nurses reinvest their shared life experiences and apply them to other dying patients continuously refining their conceptual model of loss. Through verbal and non-verbal cues, nurses transmit profound messages to their patients. Some efficient nursing interventions consist of: providing basic care and medications to prevent terminal suffering; offering an attentive and reassuring presence; respecting the contemplative phases; listening for latent messages in conversations; understanding symbolic language; respecting family dynamics; allowing family members to choose physical and psychosocial interventions to improve the patient's comfort; frequently visiting the patient and intensifying their presence; permitting the dying patient to verbalize fears and anxieties; and consistently offering tenderness, empathy, acceptance, warmth and respect. As death nears, scientific and technological aspects of nursing become less important for the patient, and the art of sincere human empathy becomes paramount.

  15. Moral dilemma: to kill or allow to die?

    PubMed

    Cole, J J

    1989-01-01

    The thesis of this paper is that while allowing a person to die with care can be morally justified in particular cases, the option of mercy killing can never be morally defended. There is a significant moral difference between these two concepts. Furthermore, the wedge argument, the medical fallibility argument, and the medical care and trust argument provide cogent and convincing reasons for maintaining a legal distinction between mercy killing and letting a person die.

  16. Microstructures and properties of aluminum die casting alloys

    SciTech Connect

    M. M. Makhlouf; D. Apelian; L. Wang

    1998-10-01

    This document provides descriptions of the microstructure of different aluminum die casting alloys and to relate the various microstructures to the alloy chemistry. It relates the microstructures of the alloys to their main engineering properties such as ultimate tensile strength, yield strength, elongation, fatigue life, impact resistance, wear resistance, hardness, thermal conductivity and electrical conductivity. Finally, it serves as a reference source for aluminum die casting alloys.

  17. Dying while living: a critique of allowing-to-die legislation.

    PubMed

    Lappé, M

    1978-12-01

    Several US states are enacting 'right-to-die' laws, in the wake of the Karen Quinlan case. But the way such a law is drafted may cast doubt on a patient's existing common law right to control all aspects of his own treatment; it may give legal sanction to a lower standard of medical care that society at present expects from doctors; and it may lead to conflict between the patient's directive and his doctor's clinical judgement which cannot readily be resolved. The laws themselves are categorised as a) legalising active killing or b) defining rights of patients to control treatment or c) assigning to others the rights to control treatment where the patient is not competent. The California law is discussed critically. The conclusion is that such legislation is not a satisfactory answer to the ethical problem of euthanasia.

  18. Dying while living: a critique of allowing-to-die legislation.

    PubMed Central

    Lappé, M

    1978-01-01

    Several US states are enacting 'right-to-die' laws, in the wake of the Karen Quinlan case. But the way such a law is drafted may cast doubt on a patient's existing common law right to control all aspects of his own treatment; it may give legal sanction to a lower standard of medical care that society at present expects from doctors; and it may lead to conflict between the patient's directive and his doctor's clinical judgement which cannot readily be resolved. The laws themselves are categorised as a) legalising active killing or b) defining rights of patients to control treatment or c) assigning to others the rights to control treatment where the patient is not competent. The California law is discussed critically. The conclusion is that such legislation is not a satisfactory answer to the ethical problem of euthanasia. PMID:739516

  19. Dying with dignity: the good patient versus the good death.

    PubMed

    Proulx, Kathryn; Jacelon, Cynthia

    2004-01-01

    Death is a unique experience for each human being, yet there is tremendous societal pressure on a dying person to be a "goodpatient " while trying to experience the "good death. " These pressures shape patient, caregiver, and family choices in end-of-life situations. The purpose of this literature review was twofold: first, to develop an understanding of "dying with dignity" to enhance the end-of-life care received by dying patients, and second, to contribute to a concept analysis of dignity to improve the clarity and consistency of future research related to dignity in aging individuals. Articles pertaining to dying with dignity from the disciplines of nursing, medicine, ethics, psychology, and sociology were reviewed using a matrix method. A dichotomy surrounding dying with dignity emerged from this review. The definition of dignity in dying identifies not only an intrinsic, unconditional quality of human worth, but also the external qualities of physical comfort, autonomy, meaningfulness, usefulness, preparedness, and interpersonal connection. For many elderly individuals, death is a process, rather than a moment in time, resting on a need for balance between the technology of science and the transcendence of spirituality.

  20. Herbivory drives the spread of salt marsh die-off.

    PubMed

    Bertness, Mark D; Brisson, Caitlin P; Bevil, Matthew C; Crotty, Sinead M

    2014-01-01

    Salt marsh die-off is a Western Atlantic conservation problem that has recently spread into Narragansett Bay, Rhode Island, USA. It has been hypothesized to be driven by: 1) eutrophication decreasing plant investment into belowground biomass causing plant collapse, 2) boat wakes eroding creek banks, 3) pollution or disease affecting plant health, 4) substrate hardness controlling herbivorous crab distributions and 5) trophic dysfunction releasing herbivorous crabs from predator control. To distinguish between these hypotheses we quantified these variables at 14 Narragansett Bay salt marshes where die-off intensity ranged from <5% to nearly 98%. Nitrogen availability, wave intensity and plant growth did not explain any variation in die-off. Herbivory explained 73% of inter-site variation in die-off and predator control of herbivores and substrate hardness also varied significantly with die-off. This suggests that salt marsh die-off is being largely driven by intense herbivory via the release of herbivorous crabs from predator control. Our results and those from other marsh systems suggest that consumer control may not simply be a factor to consider in marsh conservation, but with widespread predator depletion impacting near shore habitats globally, trophic dysfunction and runaway consumption may be the largest and most urgent management challenge for salt marsh conservation.

  1. SiC Die Attach for High-Temperature Applications

    NASA Astrophysics Data System (ADS)

    Drevin-Bazin, A.; Lacroix, F.; Barbot, J.-F.

    2013-11-01

    Eutectic solders AuIn19 and AuGe12 and nanosilver paste were investigated for SiC die attach in high-temperature (300°C) applications. The soldering or sintering conditions were optimized through die shear tests performed at room temperature. In particular, application of static pressure (3.5 MPa) during sintering resulted in greatly improved mechanical behavior of the nanosilver-based joint. Microstructural study of the eutectic solders showed formation of Au-rich grains in AuGe die attach and significant diffusion of Au and In through the Ni layer in AuIn19 die attach, which could lead to formation of intermetallic compounds. Die shear tests versus temperature showed that the behaviors of the studied die attaches are different; nevertheless they present suitable shear strengths required for high-temperature applications. The mechanical behavior of joints under various levels of thermal and mechanical stress was also studied. Creep experiments were carried out on the eutectic solders to describe the thermomechanical behavior of the complete module; only one creep mechanism was observed in the working range.

  2. Study of sintered silver as a die attach material

    NASA Astrophysics Data System (ADS)

    Sood, Falguni Vikram

    Sintered silver has become a viable and attractive alternative to soldering in various applications especially for high power and high temperature needs. The sintering process used till now is mostly pressure assisted which requires specialized equipment in the processing. A pressure-less sintering process which can be incorporated with the existing equipment is highly desired. The primary objective of this study was to analyze how the sintered silver bond formed behaves with different process and material parameters while using pressure-less sintering. Commercially available dual sized sintered silver paste consisting of micron and sub-micron particles has been studied. The sintering parameters: die/substrate metallization (Au/Ag), sintering temperature and sintering atmosphere were varied. Also an aging study at 220°C was done. It was found that the substrate and die metallization and type affected the characteristics of the sintered bond and the die shear strength. Sintering at 250°C in air atmosphere caused a gap layer to form along with the dense silver layer near the gold surfaces. This gap layer resulted in very low die shear strength thus affecting the reliability while nitrogen atmosphere at 250°C produced a different microstructure without a gap formation. With increase in sintering temperature the die shear strength increases for Ag surface die & substrate while it decreases for Au surfaces. Aging at 220°C produced the densified cluster formation that also involved the shrinkage, thereby resulting in an increase in void spacing between those clusters.

  3. Herbivory Drives the Spread of Salt Marsh Die-Off

    PubMed Central

    Bertness, Mark D.; Brisson, Caitlin P.; Bevil, Matthew C.; Crotty, Sinead M.

    2014-01-01

    Salt marsh die-off is a Western Atlantic conservation problem that has recently spread into Narragansett Bay, Rhode Island, USA. It has been hypothesized to be driven by: 1) eutrophication decreasing plant investment into belowground biomass causing plant collapse, 2) boat wakes eroding creek banks, 3) pollution or disease affecting plant health, 4) substrate hardness controlling herbivorous crab distributions and 5) trophic dysfunction releasing herbivorous crabs from predator control. To distinguish between these hypotheses we quantified these variables at 14 Narragansett Bay salt marshes where die-off intensity ranged from <5% to nearly 98%. Nitrogen availability, wave intensity and plant growth did not explain any variation in die-off. Herbivory explained 73% of inter-site variation in die-off and predator control of herbivores and substrate hardness also varied significantly with die-off. This suggests that salt marsh die-off is being largely driven by intense herbivory via the release of herbivorous crabs from predator control. Our results and those from other marsh systems suggest that consumer control may not simply be a factor to consider in marsh conservation, but with widespread predator depletion impacting near shore habitats globally, trophic dysfunction and runaway consumption may be the largest and most urgent management challenge for salt marsh conservation. PMID:24651837

  4. Exciting Message from a Dying Monster Star

    NASA Astrophysics Data System (ADS)

    1996-03-01

    this is radiation from a SiO maser in the atmosphere of the star. If it would not have been a maser, it would have been far too weak to have been detected. Although we know several hundred masers of this type in the Milky Way, this is the first discovery of a SiO maser in another galaxy than our own . Since then, the observations have been continued in collaboration with Australian astronomers, using radio telescopes at Parkes and Mopra on that continent. A most unusual star When Swedish astronomer Bengt Westerlund and his colleagues first observed this LMC maser star in 1981 with optical telescopes, they thought that it was a rather normal, cool and not particularly bright star. However, a few years later, the Dutch-British-USA InfraRed Astronomical Satellite (IRAS) revealed its true nature. The IRAS measurements showed that the star radiates most of its light in the form of infrared radiation [4], making it one of the most powerful stars in the LMC; in fact, it emits about half a million times more energy than the Sun. On this occasion, it was given the designation IRAS 04553-6825 , the number indicating its position in the sky. IRAS 04553-6825 is unusual in other ways. It is some fifty times as heavy as our Sun, and it is the biggest known star in the LMC: if it were to take the place of our Sun, it would fill the solar system out to the planet Neptune, thirty times the distance from the Earth to the Sun. It is rather cool when compared to other stars - although it still has a temperature of about 2,000 C - and it therefore has a very red colour [5]. This Press Release is accompanied by ESO Press Photo 15/96 which demonstrates that while the star is hardly visible in blue light, it shines brightly in red and infrared light. Stars like IRAS 04553-6825 are known as red supergiants. It has been unofficially dubbed `The Monster', and having reached the end of a short and hectic life, it is now dying. The nuclear reactions deep inside are undergoing important changes at

  5. Implementation of reflected light die-to-die inspection and ReviewSmart to improve 65nm DRAM mask fabrication

    NASA Astrophysics Data System (ADS)

    Kim, Do Young; Cho, Won Il; Park, Jin Hyung; Chung, Dong Hoon; Cha, Byung Chul; Choi, Seong Woon; Han, Woo Sung; Park, Ki Hun; Kim, Nam Wook; Hess, Carl; Ma, Weimin; Kim, David

    2005-11-01

    As the design rule continues to shrink towards 65nm size and beyond the defect criteria are becoming ever more challenging. Pattern fidelity and reticle defects that were once considered as insignificant or nuisance are now becoming significant yield impacting defects. The intent of this study is to utilize the new generation DUV system to compare Die-to-Die Reflected Light inspection and Die-to-Die Transmitted Light Inspection to increase defect detection for optimization of the 65nm node process. In addition, the ReviewSmart will be implemented to help categorically identify systematic tool and process variations and thus allowing user to expedite the learning process to develop a production worthy 65nm node mask process. The learning will be applied to Samsung's pattern inspection strategy, complementing Transmitted Light Inspection, on critical layers of 65 nm node to gain ability to find defects that adversely affect process window.

  6. Drawing a line between killing and letting die: the law, and law reform, on medically assisted dying.

    PubMed

    Gostin, Lawrence O

    1993-01-01

    While much has been written about the professional ethics of physician assisted dying, little is known about where the law draws the line, whether the law is enforced in practice, and how the law should be reformed to reflect changing public opinion and ethical thought. This article addresses these questions and the need for clearer public policy [in the United States] on physician assisted dying.

  7. Datenkompression, Prozessoptimierung, Aerodynamik: Eine Tour Durch die Skalen

    NASA Astrophysics Data System (ADS)

    Dahmen, Wolfgang; Marquardt, Wolfgang

    Enorm gestiegene Rechnerkapazitäten ermutigen zu einer immer genaueren Erschließung komplexer Prozesse in Natur- und Ingenieurwissenschaften durch numerische Simulation. Die Mathematik als Schnittstelle zwischen realer und digitaler Welt liefert einerseits die Grundlagen zur Formulierung notwendigerweise vereinfachter Modelle der Realität. Andererseits bietet sie aber auch die methodischen Grundlagen für den Entwurf effizienter Algorithmen, die aus solchen Modellen quantitative Information gewinnen können. Eine zentrale Herausforderung liegt dabei in der Tatsache, dass reale Prozesse meist durch relevante Anteile auf einer riesigen Spannweite von Längenskalen getrieben werden. Die Entwicklung mathematischer Methoden zur Behandlung von Mehrskaligkeit ist daher von wesentlicher Bedeutung. In diesem Artikel wird dies anhand jüngster Entwicklungen in ganz unterschiedlichen Anwendungsbereichen erklärt und illustriert, auch um deutlich zu machen, wieviele "Fliegen“ man mit einer "mathematischen Klappe“ schlagen kann. Insbesondere werden grundlegende, auf Waveletzerlegung beruhende Prinzipien zunächst im Rahmen der Bildkompression und -kodierung auf weitgehend elementare Weise erklärt. Es wird dann aufgezeigt, dass diese Konzepte in ganz ähnlicher Weise bei der Datenanalyse im Zusammenhang mit verfahrenstechnischen Anwendungen, bei großskaligen Optimierungsproblemen der Prozessindustrie sowie bei komplexen Strömungsproblemen wie in aerodynamischen Anwendungen zum Tragen kommen. Stabile Zerlegungen in Anteile unterschiedlicher Längenskalen eröffnen dabei einen Zugang zu adaptiven Lösungskonzepten, die in der Lage sind, automatisch Rechnerresourcen dort zu plazieren, wo sie zu einer ökonomischen Realisierung der gewünschten Lösungsqualität, etwa in Form von Genauigkeitstoleranzen, benötigt werden.

  8. Attitudes of Older Chinese Patients Toward Death and Dying.

    PubMed

    Chen, Qian; Flaherty, Joseph Henry; Guo, Ju Hong; Zhou, Yan; Zhang, Xue Mei; Hu, Xiu Ying

    2017-09-07

    Due to the aging population of China, the need for palliative care will increase. However, one of the barriers to utilization of palliative care is the traditional belief that talking about death and dying is taboo. The aim of this study was to examine to what extent older Chinese patients were willing to answer questions about death and dying by asking them about "fear of death" and their desire to "use advanced life support when dying." Survey questionnaire. Convenience sample (N = 993 hospitalized patients). Only 215 (21.7%; 95% confidence interval [CI] 16.2%-27.1%) and 99 (9.9%; 95% CI 4.1%-15.8%) patients did not answer the questions related to "fear of death" and "use of advanced life support when dying," respectively, while 439 (44.2%; 95% CI 38.7%-49.7%) answered "yes" and 339 (34.1%; 95% CI 28.7%-39.6%) answered "no" for "fear of death" and 382 (38.5%; 95% CI 32.6%-44.3%) answered "yes" and 512 (51.6%; 95% CI 45.7%-57.4%) answered "no" for "use of advanced life support when dying." In multinomial logistic regression analysis, fear of death was associated with younger age, lowest level of function, and desire to use advanced life support. The majority of older patients were willing to answer the two questions about death and dying. About one-third of patients were not afraid of death, and older patients were less likely to be afraid of death. More than 50% of patients answered that they would not choose advanced life support when dying. More research in this area is needed to help advance palliative care in China.

  9. Relatives' and staff's experience of patients dying in ICU.

    PubMed

    Donnelly, S M; Psirides, A

    2015-12-01

    Intensive care units (ICUs) exist to support patients through acute illness that threatens their life. Although ICUs aim to save life, they are also a place where a significant proportion of patients die with international mortality rates ranging from 15% to 24%. To explore the experience of relatives and staff of patients dying in ICU using qualitative approach. Consecutive patients were identified who were dying in the ICU. The researcher met the families prior to the patient's death. The ICU nurse and doctor most involved were interviewed within 48 h of the death. The families were interviewed 2 weeks later. Interviewees described their experience of the patient's dying and death. Recruitment until data saturation and thematic analysis occurred concurrently. Ten families, nurses and doctors were interviewed in relation to 10 patients. In caring for the patients who are dying in the ICU and their families, nurses practice to their satisfaction with creativity and autonomy, although concerned about continuity of care at handover. Families appreciate kindness and regular sensitive communication. Families would like more contact with the ICU doctors. Limiting access to the patient according to ICU protocol is distressing for relatives. Doctors struggle with decision making, determining prognosis and witnessing the grief of relatives. Some doctors wish to have a greater part in care of the dying patient. Distress among nurses reported in the ICU literature and attributed to disenfranchisement by doctors was not evident. In contrast, some doctors struggle to practice what they value. Adherence to ICU protocols needs flexibility when a patient is dying. © The Author 2015. Published by Oxford University Press on behalf of the Association of Physicians. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  10. A CBPR Partnership Increases HIV Testing among men who have sex with men (MSM): Outcome Findings from a Pilot Test of the CyBER/testing Internet Intervention

    PubMed Central

    Rhodes, Scott D.; Vissman, Aaron T.; Stowers, Jason; Miller, Cindy; McCoy, Thomas P.; Hergenrather, Kenneth C.; Wilkin, Aimee M.; Reece, Michael; Bachmann, Laura H.; Ore, Addison; Ross, Michael W.; Hendrix, Ellen; Eng, Eugenia

    2012-01-01

    The Internet has emerged as an important tool for the delivery of health promotion and disease prevention interventions. Our community-based participatory research (CBPR) partnership developed and piloted CyBER/testing, a culturally congruent intervention designed to promote HIV testing among men who have sex with men (MSM) within existing Internet chat rooms. Using a quasi-experimental, single-group study design, cross-sectional data were collected from chat room participants, known as “chatters,” at pretest (n=346) and post-test (n=315). Extant profile data also were collected to describe the demographics of the online population. The intervention significantly increased self-reported HIV testing among chatters overall, increasing rates from 44.5% at pretest to nearly 60% at post-test (p<.001). Furthermore, chatters who reported having both male and female sexual partners had nearly 6 times the odds of reporting HIV testing at post-test. Findings suggest that chat room-based HIV testing intervention may increase testing among MSM who may be difficult to reach in traditional physical spaces. PMID:21393625

  11. Acceptance of dying: a discourse analysis of palliative care literature.

    PubMed

    Zimmermann, Camilla

    2012-07-01

    The subject of death denial in the West has been examined extensively in the sociological literature. However, there has not been a similar examination of its "opposite", the acceptance of death. In this study, I use the qualitative method of discourse analysis to examine the use of the term "acceptance" of dying in the palliative care literature from 1970 to 2001. A Medline search was performed by combining the text words "accept or acceptance" with the subject headings "terminal care or palliative care or hospice care", and restricting the search to English language articles in clinical journals discussing acceptance of death in adults. The 40 articles were coded and analysed using a critical discourse analysis method. This paper focuses on the theme of acceptance as integral to palliative care, which had subthemes of acceptance as a goal of care, personal acceptance of healthcare workers, and acceptance as a facilitator of care. For patients and families, death acceptance is a goal that they can be helped to attain; for palliative care staff, acceptance of dying is a personal quality that is a precondition for effective practice. Acceptance not only facilitates the dying process for the patient and family, but also renders care easier. The analysis investigates the intertextuality of these themes with each other and with previous texts. From a Foucauldian perspective, I suggest that the discourse on acceptance of dying represents a productive power, which disciplines patients through apparent psychological and spiritual gratification, and encourages participation in a certain way to die.

  12. Phagocytosis of dying tumor cells by human peritoneal mesothelial cells.

    PubMed

    Wagner, Britta Janina; Lindau, Dennis; Ripper, Dagmar; Stierhof, York-Dieter; Glatzle, Jörg; Witte, Maria; Beck, Henning; Keppeler, Hildegard; Lauber, Kirsten; Rammensee, Hans-Georg; Königsrainer, Alfred

    2011-05-15

    Peritoneal carcinomatosis is an advanced form of metastatic disease characterized by cancer cell dissemination onto the peritoneum. It is commonly observed in ovarian and colorectal cancers and is associated with poor patient survival. Novel therapies consist of cytoreductive surgery in combination with intraperitoneal chemotherapy, aiming at tumor cell death induction. The resulting dying tumor cells are considered to be eliminated by professional as well as semi-professional phagocytes. In the present study, we have identified a hitherto unknown type of 'amateur' phagocyte in this environment: human peritoneal mesothelial cells (HMCs). We demonstrate that HMCs engulf corpses of dying ovarian and colorectal cancer cells, as well as other types of apoptotic cells. Flow cytometric, confocal and electron microscopical analyses revealed that HMCs ingest dying cell fragments in a dose- and time-dependent manner and the internalized material subsequently traffics into late phagolysosomes. Regarding the mechanisms of prey cell recognition, our results show that HMCs engulf apoptotic corpses in a serum-dependent and -independent fashion and quantitative real-time PCR (qRT-PCR) analyses revealed that diverse opsonin receptor systems orchestrating dying cell clearance are expressed in HMCs at high levels. Our data strongly suggest that HMCs contribute to dying cell removal in the peritoneum, and future studies will elucidate in what manner this influences tumor cell dissemination and the antitumor immune response.

  13. Death and dying anxiety among elderly Arab Muslims in Israel.

    PubMed

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Gigini, Ibrahim

    2010-04-01

    Death and dying anxiety were examined among elderly Arab Muslims in Israel. A total of 145 people aged 60 and over were interviewed using a standardized questionnaire. Nursing home residents reported higher death anxiety than others; women and uneducated participants reported greater levels of fear of death and dying than others. There were no differences based on religiosity. Death anxiety was related to gender and education for elderly living in the community, but social support and self-esteem were additional correlates for those living in nursing homes. The results of this study indicate that fostering a sense that one has a supportive social and familial network is important in decreasing death and dying anxiety among elderly Arab people. It would also be beneficial to provide information and knowledge that might relieve some of the anxiety they experience.

  14. How people die in hospital general wards: a descriptive study.

    PubMed

    Toscani, Franco; Di Giulio, Paola; Brunelli, Cinzia; Miccinesi, Guido; Laquintana, Dario

    2005-07-01

    To describe how patients die in hospital, 370 patients (age >18 years; in hospital for>24 hours) who died on the general wards of 40 Italian hospitals were assessed. Differences between patients whose death was expected and patients whose death was unexpected were evaluated. Data on treatments and care in proximity of death were collected after interviewing the nurse responsible for the patient within 72 hours of the patient's death, and from clinical and nursing records. For 58% of patients, death was highly expected. Symptom control was inadequate for the most severely ill patients: 75% experienced at least one "severe" symptom (42% pain and 45% dyspnea). Nurses tended to judge patients' global care as "good" or "very good" (76%), in spite of the persistence of symptoms and the scant use of analgesics. Despite some encouraging signs of sensitivity to end-of-life problems, acute inpatient institutions in Italy still deal inadequately with the needs of dying persons.

  15. Hospice nurses' emotional challenges in their encounters with the dying.

    PubMed

    Ingebretsen, Lina Paola; Sagbakken, Mette

    2016-01-01

    The purpose of this study was to explore nurses' emotional challenges when caring for the dying in hospices. The study has a qualitative design, and knowledge was developed through a dialectical exchange between theory and data. Ten individual in-depth interviews were conducted with nurses recruited from two hospices in Denmark. Although all of the nurses said that they experienced emotional challenges or felt emotionally touched during their work, the study found a variety of opinions related to the extent to which their emotional reactions should be revealed in their role as a hospice professional. The participants described their emotional challenges as being simultaneously draining and enriching experiences leading to personal and professional growth and development. The study may contribute to increased awareness of emotional challenges for hospice nurses, which involve continuous reflection and balancing between meeting the dying as a human being and meeting the dying as a hospice professional.

  16. Phenomenological study of ICU nurses' experiences caring for dying patients.

    PubMed

    King, Phyllis Ann; Thomas, Sandra P

    2013-11-01

    This existential phenomenological study explored caring for the dying based on the philosophical works of Merleau-Ponty. Fourteen critical care nurses were asked to describe lived experiences of caring for dying patients. An encompassing theme of Promises to Keep emerged, with five subthemes, including the following: (a) promise to be truthful: "Nurses are in the game of reality," (b) promise to provide comfort: "I'll make him comfortable," (c) promise to be an advocate: "Just one more day," (d) "Promise that couldn't be kept," and (e) "Promise to remain connected." The essence of intensive care nurses' lived experience of caring for dying patients is captured in the theme Promises to Keep. Nurses accept the reality of death and express strong commitment to making it as comfortable, peaceful, and dignified as possible, despite critical care unit environments that foster a "paradigm of curing" rather than a "paradigm of caring.".

  17. Is "healthy dying" a paradox? revisiting an early Kastenbaum challenge.

    PubMed

    Kellehear, Allan

    This article is a review of Robert Kastenbaum's 1979 essay entitled "Healthy dying: A paradoxical quest continues." It begins with a summary of the arguments and challenges in the original essay. This is followed by an evaluation of his original claims in the light of contemporary insights in modern public health history and empirical studies of near-death experiences and death bed visions. The recent development of health promotion in palliative care is described in relation to these developments and Kastenbaum's early question about the paradoxical quest for health while dying is again posed against this background. Given our modern understanding of "health" in current global health policy and debates, it is argued that "healthy dying" is no paradox. Instead, the pursuit of health at the end of life represents a realistic modern desire to compress morbidity, minimize unnecessary suffering, and enhance quality of life at this time.

  18. Hospice nurses’ emotional challenges in their encounters with the dying

    PubMed Central

    Ingebretsen, Lina Paola; Sagbakken, Mette

    2016-01-01

    The purpose of this study was to explore nurses’ emotional challenges when caring for the dying in hospices. The study has a qualitative design, and knowledge was developed through a dialectical exchange between theory and data. Ten individual in-depth interviews were conducted with nurses recruited from two hospices in Denmark. Although all of the nurses said that they experienced emotional challenges or felt emotionally touched during their work, the study found a variety of opinions related to the extent to which their emotional reactions should be revealed in their role as a hospice professional. The participants described their emotional challenges as being simultaneously draining and enriching experiences leading to personal and professional growth and development. The study may contribute to increased awareness of emotional challenges for hospice nurses, which involve continuous reflection and balancing between meeting the dying as a human being and meeting the dying as a hospice professional. PMID:27258584

  19. Optimization of an Extrusion Die for Polymer Flow

    NASA Astrophysics Data System (ADS)

    Ridene, Y. Chahbani; Graebling, D.; Boujelbene, M.

    2011-01-01

    In this work, we used the CFD software PolyFlow to optimize the extrusion process of polystyrene flow. In this process, the flow of the molten polymer through the die can be viewed as a critical step for the material in terms of shear rate, self heating by viscous dissipation and temperature reached. The simulation is focused on the flow and heat transfer in the die to obtain a uniform velocity profile and a uniform temperature profile. The rheological behavior of polymer melt was described by the nonlinear Giesekus model. The dependence of the viscosity has also to be taken into account for a correct description of the flow. The design of the die has been validated by our numerical simulation.

  20. Wie die Sonne ins Kraftwerk kommt: Solarthermische Kraftwerke

    NASA Astrophysics Data System (ADS)

    Pitz-Paal, Robert

    2004-01-01

    Solarthermische Kraftwerke sammeln wie riesige Brenngläser die Sonnenstrahlung und treiben damit eine Wärmekraftmaschine an. Drei Konstruktionsprinzipien haben sich heute durchgesetzt. Bereits im kommerziellen Einsatz sind Systeme mit schwenkbaren, verspiegelten Parabolrinnen, die das Sonnenlicht auf ein zentrales Absorberrohr konzentrieren. Durch dieses fließt ein Wärmetransportmedium. Beim Zentral-Receiver-System fokussiert ein Feld verstellbarer Spiegel das Sonnenlicht auf die Spitze eines Turms. Dort sitzt ein Receiver, den ein Wärmetransportmedium durchströmt. Für kleine, dezentrale Anlagen eignen sich Dish-Stirling-Systeme. Das sind schwenkbare, paraboloide Spiegelschüsseln mit einem Stirling-Motor im Brennpunkt. Zentral-Receiver- und Dish-Stirling-Systeme sind noch im Entwicklungsstadium.

  1. Physician Burnout and the Calling to Care for the Dying.

    PubMed

    Yoon, John D; Hunt, Natalie B; Ravella, Krishna C; Jun, Christine S; Curlin, Farr A

    2016-01-01

    Physician burnout raises concerns over what sustains physicians' career motivations. We assess whether physicians in end-of-life specialties had higher rates of burnout and/or calling to care for the dying. We also examined whether the patient centeredness of the clinical environment was associated with burnout. In 2010 to 2011, we conducted a national survey of US physicians from multiple specialties. Primary outcomes were a validated single-item measure of burnout or sense of calling to end-of-life care. Primary predictors of burnout (or calling) included clinical specialty, frequency of encounters with dying patients, and patient centeredness of the clinical environments ("My clinical environment prioritizes the need of the patient over maximizing revenue"). Adjusted response rate among eligible respondents was 62% (1156 of 1878). Nearly a quarter of physicians (23%) experienced burnout, and rates were similar across all specialties. Half of the responding physicians (52%) agreed that they felt called to take care of patients who are dying. Burned-out physicians were more likely to report working in profit-centered clinical environments (multivariate odds ratio [OR] of 1.9; confidence interval [CI]: 1.3-2.8) or experiencing emotional exhaustion when caring for the dying (multivariate OR of 2.1; CI: 1.4-3.0). Physicians who identified their work as a calling were more likely to work in end-of-life specialties, to feel emotionally energized when caring for the dying, and to be religious. Physicians from end-of-life specialties not only did not have increased rates of burnout but they were also more likely to report a sense of calling in caring for the dying.

  2. New Zealanders' attitudes toward physician-assisted dying.

    PubMed

    Rae, Nicola; Johnson, Malcolm H; Malpas, Phillipa J

    2015-03-01

    Physician-assisted dying (PAD) is legal in several countries in Europe and some states of the United States. Despite regular societal debate in New Zealand about assisted dying, little is known about what the New Zealand public think about this issue. The present study was the first to examine New Zealanders' attitudes toward assisted dying in the context of various parameters of patient suffering, and as a public policy issue. Stratified random sampling techniques were used to elicit 677 participants from the electoral roll. They completed an anonymous questionnaire asking about the most appropriate medical response to patients who explicitly request assistance in dying, as well as their opinions around legalization of PAD. Overall, 78% felt PAD was the most appropriate response in certain situations while 82% felt it should be legalized. When the patient was suffering from loss of dignity, PAD was considered the most appropriate response to patients' requests for assistance in dying by 75% of respondents; when the patient was suffering from intractable pain, 65% of respondents considered PAD the most appropriate response. Almost 65% of those who wanted PAD to be legalized felt it should only be accessible to those suffering unbearably with little hope of recovery, and 46% felt that the presence of mental illness should be an exclusionary factor. The results have highlighted the high value respondents place on patient autonomy with regards to end-of-life choices; however the choice to hasten death is not a 'right' that should be available to all. RESULTS have clearly shown that New Zealanders believe regulation will play a key role in maintaining compliance with any assisted dying legislation, and in restricting access, so that only patients who are suffering intolerably and hopelessly are able to legally gain medical assistance to end their life.

  3. Living through the end: The phenomenon of dying at home.

    PubMed

    Solomon, Diane N; Hansen, Lissi

    2015-04-01

    To explore the unique lived experiences of one patient who died at home and her family members, and to interpret how dying at home influenced patterns of bereavement for this patient's family. Benner's (1985) interpretive phenomenological approach was employed to get at the embedded nature of the social phenomenon of dying at home, uncovering what may be taken for granted by participants - in this case, during and after the patient's home hospice course. The participants were a 78-year-old female diagnosed with amyotrophic lateral sclerosis six months prior to death, her husband, and three of her four children. In line with the patient's wish to die at home, she voluntarily forewent food and drink when she no longer wished to watch her body deteriorate and felt that her life had run its course. She informed her family of this plan, and all were supportive. For data collection, separate single in-depth interviews were conducted with the deceased three months prior to death, and after death with three of her four children and her spouse of 60 years. For data analysis, the interview transcripts were coded for paradigm cases, exemplars, and themes. The paradigm case, "The Meaning of Being at Home," revealed that for study participants, remaining home with hospice provided a richly familiar, quiet, and safe environment for being together over time and focusing on relationships. Exemplars included "Driving Her Own Course" and "Not Being a Burden." Salient themes encompassed patient and family characteristics, support, emotions, the value of time, and aspects of the healthcare team. End-of-life care providers need to hold a patient-centered, family-focused view to facilitate patient and family wishes to remain home to die. Investigation into family relationships, from the perspectives of both patient and family members, longitudinally, may enrich understanding and ability and help patients to die at home.

  4. [The special requirements of old age in terms of dying].

    PubMed

    Kruse, Andreas

    2017-01-01

    It is expected that the rising average life expectancy will leave ever more people with chronic progressive diseases of the body and brain. This then means not only having to deal with increasingly longer periods of care, but also possibly distinct neurocognitive disorders in the years prior to death and dying. The aim of this study is to report epidemiological data on the causes of death, as well as on the places of death. In addition, the attitudes and behaviour towards death and dying, as well as the different places of death will be discussed. Expecting support in the process of dying, as well as factors that have a more conducive effect on the internal processing of dying, are mentioned. At the same time, the attitudes and behaviours in respect of the accompaniment of dying people, which can be seen in the staff in clinical inpatient facilities, are addressed. Personal intense grappling with dying and death actually has a positive effect on these behaviours and attitudes. Finally, the contribution turns to the question of to what extent the theory of compression of morbidity may be perceived as valid, especially in view of the rising average life expectancy. It is emphasised that chronic diseases, even when no functional loss is present, place not only great demands on the patient, but also on the care system and financial resources. Furthermore, it is demonstrated that frailty can often cause mental disorders. Specific requirements with a view to the care of people with dementia are given.

  5. Quality of dying and death with cancer in Israel.

    PubMed

    Braun, Michal; Hasson-Ohayon, Ilanit; Hales, Sarah; Zimmermann, Camilla; Rydall, Anne; Peretz, Tamar; Rodin, Gary

    2014-07-01

    The quality of dying and death refers to the evaluation of the final days of life and the moment of death with respect to how it is prepared for, faced and experienced by those with a terminal illness. It includes experience in multiple domains: physical, psychological, social, spiritual or existential, the nature of health care, life closure and death preparation, and the circumstances of death. To explore the quality of dying and death in cancer patients in Israel and its relationship to place of death and socio-demographic characteristics of the primary caregivers and the deceased. Retrospective assessment of the quality of dying and death, based on caregiver responses to the Quality of Dying and Death (QODD) questionnaire (overall score ranges from 0 to 100; higher scores reflect better dying and death experiences) 8 to 10 months after the death. Ninety-five caregivers of Jewish cancer patients, most of whom were female spouses or children of the deceased. Mean QODD score was 57.2 (standard deviation [SD]=15), which is in the low-moderate range. Place of death, gender and age of the caregiver, and age of the deceased, were associated with QODD score. This retrospective study in Israel demonstrated that the overall quality of dying and death was regarded as poor by almost half of the caregivers. These findings may reflect the relative lack of specialized palliative care and advance care planning in Israel at the time of this study, which took place between 2006 and 2009. Further research and enhancement of palliative care resources may be needed in Israel and several encouraging recent developments (e.g. staff training and legislation) suggest that such changes are now underway.

  6. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died otherwise than by slaughter. No person engaged in the business of buying, selling, or...

  7. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died otherwise than by slaughter. No person engaged in the business of buying, selling, or...

  8. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died otherwise than by slaughter. No person engaged in the business of buying, selling, or...

  9. The case for a sociology of dying, death, and bereavement.

    PubMed

    Thompson, Neil; Allan, June; Carverhill, Philip A; Cox, Gerry R; Davies, Betty; Doka, Kenneth; Granek, Leeat; Harris, Darcy; Ho, Andy; Klass, Dennis; Small, Neil; Wittkowski, Joachim

    2016-01-01

    Dying, death, and bereavement do not occur in a social vacuum. How individuals and groups experience these phenomena will be largely influenced by the social context in which they occur. To develop an adequate understanding of dying, death, and bereavement we therefore need to incorporate a sociological perspective into our analysis. This article examines why a sociological perspective is necessary and explores various ways in which sociology can be of practical value in both intellectual and professional contexts. A case study comparing psychological and sociological perspectives is offered by way of illustration.

  10. [Psychosocial aspects of institutional dying in the elderly (author's transl)].

    PubMed

    Rest, H O

    1979-01-01

    Especially in the elderly dying is less a somatic than a psychosocial act, which results from the relationship of institution, structur, professional staff, and patient. During the psychosocial dying occurs a continual death of identity, integrity, and relationship, which has the origin in station ideologies, insufficient training of the staff, psychiatric injudiciousness, and in the fail in death-contact. During a some years lasting research-work the different connections are inquired and the dangers of an over-subscribed theory of activity are represented.

  11. Do people whose names begin with "D" really die young?

    PubMed

    Smith, Gary

    2012-02-01

    It has been reported that professional baseball players whose first names begin with the letter "D" tend to die relatively young (E. L. Abel & M. L. Kruger, 2010). However, the statistical evidence for this claim is based on selective data and a statistical test that ignores important confounding influences. A valid test applied to more comprehensive data from the same source does not show a statistically significant relationship between initials and longevity. In addition, data for the years 1960 through 2004 for 6.7 million White, non-Hispanic California decedents do not replicate the claim that D's die young.

  12. Einsteins Traum. Expeditionen an die Grenzen der Raumzeit.

    NASA Astrophysics Data System (ADS)

    Hawking, S. W.

    This book is a German translation, by H. Kober, of the English original "Black holes and baby universes and other essays" published in 1993. It is a collection of articles written by the author between 1976 and 1992. Contents: 1. Kindheit. 2. Oxford und Cambridge. 3. Meine Erfahrung mit ALS. 4. Öffentliche Einstellungen zur Wissenschaft. 5. Eine kurze Geschichte der Kurzen Geschichte. 6. Mein Standpunkt. 7. Einsteins Traum. 8. Der Ursprung des Universums. 9. Die Quantenmechanik Schwarzer Löcher. 10. Schwarze Löcher und Baby-Universen. 11. Ist alles vorherbestimmt? 12. Die Zukunft des Universums. 13. Desert Island Discs, ein Interview.

  13. A protection type of flow-guided extrusion die for semi-hollow Al-Profiles

    NASA Astrophysics Data System (ADS)

    Deng, Rurong; Yun, Peng; Huang, Cuiting; Huang, Xuemei

    2017-09-01

    A new die structure for the semi-hollow Al-profiles was presented. Through a practical example, the die structure named protection type of flow-guided die was introduced. The composition of the structure and the selection of structure parameters were analyzed in detail. And the method of checking the die strength was introduced. The characteristics of the new structure were simple and easy to process. The practical application shows that the die structure can enhance the strength and prolong the life of the die. It is worth promoting. The purpose is to extend the experience and the new die structure, Provide reliable and valid reference data to the designers.

  14. Die chronische venöse Insuffizienz - Eine Zusammenfassung der Pathophysiologie, Diagnostik und Therapie.

    PubMed

    Santler, Bettina; Goerge, Tobias

    2017-05-01

    Die chronische Venenerkrankung ist eine weit verbreitete Krankheit, die in späteren Stadien mit einer Vielzahl an Symptomen, aber auch Komplikationen wie dem Ulcus cruris, einhergeht. Dies wiederum hat weitreichende Auswirkungen auf die Lebensqualität der Patienten wie auch auf das Gesundheitssystem. Für die Diagnostik der chronischen Venenerkrankungen steht eine Auswahl an Verfahren zur Verfügung, wobei sich die farbkodierte Duplexsonographie als Goldstandard etabliert hat. Im Bereich der Therapie kam es in den letzten Jahrzehnten zu großen Fortschritten, sodass heute auch Alternativen zum klassischen Stripping durch die endoluminalen Verfahren zur Verfügung stehen. Die Wahl der Therapieoption ist jedoch weiterhin stark abhängig von mehreren Faktoren, unter anderem von den anatomischen Gegebenheiten und dem Krankheitsstadium. Im folgenden Artikel werden die Anatomie und Pathophysiologie, sowie die aktuellen Standards der Diagnostik und Therapie zusammengefasst. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  15. Innovative Die Material and Lubrication Strategies for Clean and Energy Conserving Forging Technologies

    SciTech Connect

    Rajiv Shivpuri; Sailesh Babu; Lin Yang; Yijun Zhu

    2007-01-08

    The objective of this project was to develop and implement innovative die material and surface coating strategies such as composite dies and lubricated coatings to increase die lives and to reduce environmental pollution. In this project approaches and software were developed for die life optimization and optimal design of lubrication systems for hot forging. In addition, LENS applied nickel-aluminide coatings were developed and validated in the industrial environment for significant improvements in die life.

  16. Pultrusion dies -- From massive and power hungry to lean and smart

    SciTech Connect

    Awa, T.W.; Price, H.L.

    1996-11-01

    A lean and smart pultrusion die is proposed. The concept arose from a thermal analysis which showed that present dies involve large heat losses balancing large power inputs with temperature excursions being damped by high die mass. As power costs increase and control costs decrease, pultrusion dies may evolve toward low mass, highly insulated dies with a computer for monitoring and control purposes as well as for heat transfer estimates.

  17. The protein structure determines the sensitizing capacity of Brazil nut 2S albumin (Ber e1) in a rat food allergy model

    PubMed Central

    2013-01-01

    It is not exactly known why certain food proteins are more likely to sensitize. One of the characteristics of most food allergens is that they are stable to the acidic and proteolytic conditions in the digestive tract. This property is thought to be a risk factor in allergic sensitization. The purpose of the present study was to investigate the contribution of the protein structure of 2S albumin (Ber e1), a major allergen from Brazil nut, on the sensitizing capacity in vivo using an oral Brown Norway rat food allergy model. Disulphide bridges of 2S albumin were reduced and alkylated resulting in loss of protein structure and an increased pepsin digestibility in vitro. Both native 2S albumin and reduced/alkylated 2S albumin were administered by daily gavage dosing (0.1 and 1 mg) to Brown Norway rats for 42 days. Intraperitoneal administration was used as a positive control. Sera were analysed by ELISA and passive cutaneous anaphylaxis. Oral exposure to native or reduced/alkylated 2S albumin resulted in specific IgG1 and IgG2a responses whereas only native 2S albumin induced specific IgE in this model, which was confirmed by passive cutaneous anaphylaxis. This study has shown that the disruption of the protein structure of Brazil nut 2S albumin decreased the sensitizing potential in a Brown Norway rat food allergy model, whereas the immunogenicity of 2S albumin remained preserved. This observation may open possibilities for developing immunotherapy for Brazil nut allergy. PMID:24180644

  18. View west of small tooling and forging dies in Blacksmith ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View west of small tooling and forging dies in Blacksmith Shop, Boilermakers Department, east side of building 57; during World War II approximately forty women were employed as blacksmith's forging a variety of small tools; these may be the tools they used. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  19. Preventive Therapy with Siblings of a Dying Child.

    ERIC Educational Resources Information Center

    Feinberg, Daniel

    A case study of psychiatric intervention for two sisters whose brother is dying of leukemia is presented. The therapeutic technique attempted to deal with the threatened loss by a forthright approach to the reality situation, encouraging "immunizing" discussions, allowance for catharsis without severe regression, emphasis on reality orientation,…

  20. Technological Change in Michigan's Tool and Die Industry.

    ERIC Educational Resources Information Center

    Smith, Donald N.

    This study was conducted to answer four questions about the tool and die industry in Michigan. These were: (1) What are the current production techniques? (2) To what extent are these industrialists aware of new technologies? (3) What technical and economic factors affect technological change? and (4) To what extent will new technologies replace…