Fatal falls in the U.S. residential construction industry.

PubMed

Dong, Xiuwen Sue; Wang, Xuanwen; Largay, Julie A; Platner, James W; Stafford, Erich; Cain, Chris Trahan; Choi, Sang D

2014-09-01

Falls from heights remain the most common cause of workplace fatalities among residential construction workers in the United States. This paper examines patterns and trends of fall fatalities in U.S. residential construction between 2003 and 2010 by analyzing two large national datasets. Almost half of the fatalities in residential construction were from falls. In the residential roofing industry, 80% of fatalities were from falls. In addition, about one-third of fatal falls in residential construction were among self-employed workers. Workers who were older than 55 years, were Hispanic foreign-born, or employed in small establishments (1-10 employees) also had higher proportions of fatal falls in residential construction compared to those in nonresidential construction. The findings suggest that fall safety within the residential construction industry lags behind commercial construction and industrial settings. Fall prevention in residential construction should be enhanced to better protect construction workers in this sector. © 2014 Wiley Periodicals, Inc.

Can industry afford solar energy

NASA Astrophysics Data System (ADS)

Kreith, F.; Bezdek, R.

1983-03-01

Falling oil prices and conservation measures have reduced the economic impetus to develop new energy sources, thus decreasing the urgency for bringing solar conversion technologies to commercial readiness at an early date. However, the capability for solar to deliver thermal energy for industrial uses is proven. A year-round operation would be three times as effective as home heating, which is necessary only part of the year. Flat plate, parabolic trough, and solar tower power plant demonstration projects, though uneconomically operated, have revealed engineering factors necessary for successful use of solar-derived heat for industrial applications. Areas of concern have been categorized as technology comparisons, load temperatures, plant size, location, end-use, backup requirements, and storage costs. Tax incentives have, however, supported home heating and not industrial uses, and government subsidies have historically gone to conventional energy sources. Tax credit programs which could lead to a 20% market penetration by solar energy in the industrial sector by the year 2000 are presented.

Empowering biomedical engineering undergraduates to help teach design.

PubMed

Allen, Robert H; Tam, William; Shoukas, Artin A

2004-01-01

We report on our experience empowering upperclassmen and seniors to help teach design courses in biomedical engineering. Initiated in the fall of 1998, these courses are a projects-based set, where teams of students from freshmen level to senior level converge to solve practical problems in biomedical engineering. One goal in these courses is to teach the design process by providing experiences that mimic it. Student teams solve practical projects solicited from faculty, industry and the local community. To hone skills and have a metric for grading, written documentation, posters and oral presentations are required over the two-semester sequence. By requiring a mock design and build exercise in the fall, students appreciate the manufacturing process, the difficulties unforeseen in the design stage and the importance of testing. A Web-based, searchable design repository captures reporting information from each project since its inception. This serves as a resource for future projects, in addition to traditional ones such as library, outside experts and lab facilities. Based on results to date, we conclude that characteristics about our design program help students experience design and learn aspects about teamwork and mentoring useful in their profession or graduate education.

Engineering Enrollments, Fall 1986.

ERIC Educational Resources Information Center

Ellis, Richard A.

1987-01-01

Reports on the results of the Engineering Manpower Commission's 1986 survey of engineering enrollments, comparing them to the previous ten years of surveys. Provides tables of fall 1986 engineering enrollments categorized by curriculum, women, minorities, foreign nationals, schools, and by all students. (TW)

Graphical fault tree analysis for fatal falls in the construction industry.

PubMed

Chi, Chia-Fen; Lin, Syuan-Zih; Dewi, Ratna Sari

2014-11-01

The current study applied a fault tree analysis to represent the causal relationships among events and causes that contributed to fatal falls in the construction industry. Four hundred and eleven work-related fatalities in the Taiwanese construction industry were analyzed in terms of age, gender, experience, falling site, falling height, company size, and the causes for each fatality. Given that most fatal accidents involve multiple events, the current study coded up to a maximum of three causes for each fall fatality. After the Boolean algebra and minimal cut set analyses, accident causes associated with each falling site can be presented as a fault tree to provide an overview of the basic causes, which could trigger fall fatalities in the construction industry. Graphical icons were designed for each falling site along with the associated accident causes to illustrate the fault tree in a graphical manner. A graphical fault tree can improve inter-disciplinary discussion of risk management and the communication of accident causation to first line supervisors. Copyright © 2014 Elsevier Ltd. All rights reserved.

Falls from Height in the Construction Industry: A Critical Review of the Scientific Literature

PubMed Central

Nadhim, Evan A.; Hon, Carol; Xia, Bo; Stewart, Ian; Fang, Dongping

2016-01-01

Globally, falls from height (FFH) are a substantial public health jeopardy and are among the important leading causes of serious and fatal injuries for construction workers. A comprehensive understanding of the causal factors in FFH incidents is urgently required; however, the literature appears to lack a scientific review of FFH. In this study, 297 articles that contribute to the topic of fall incidents were reviewed. Seventy-five (75) articles met the criteria for relevance and were aggregated in a database to support a critical review. A synthesis of macro-variables approach was adopted rather than a structured meta-analysis. Such a method of analysis provides the flexibility to combine previous studies' findings. The most common factors associated with FFH are risky activities, individual characteristics, site conditions, organizational characteristics, agents (scaffolds/ladders) and weather conditions. The outcomes contributed to identifying the most significant research area for safety enhancement by improving engineering facilities, behaviour investigations and FFH prevention methods. PMID:27367706

Fatal falls and PFAS use in the construction industry: Findings from the NIOSH FACE reports.

PubMed

Dong, Xiuwen Sue; Largay, Julie A; Choi, Sang D; Wang, Xuanwen; Cain, Chris Trahan; Romano, Nancy

2017-05-01

This study analyzed the Construction FACE Database (CFD), a quantitative database developed from reports of the Fatality Assessment and Control Evaluation (FACE) program conducted by the National Institute for Occupational Safety and Health (NIOSH). The CFD contains detailed data on 768 fatalities in the construction industry reported by NIOSH and individual states from 1982 through June 30, 2015. The results show that falls accounted for 42% (325) of the 768 fatalities included in the CFD. Personal fall arrest systems (PFAS) were not available to more than half of the fall decedents (54%); nearly one in four fall decedents (23%) had access to PFAS, but were not using it at the time of the fall. Lack of access to PFAS was particularly high among residential building contractors as well as roofing, siding, and sheet metal industry sectors (∼70%). Although the findings may not represent the entire construction industry today, they do provide strong evidence in favor of fall protection requirements by the Occupational Safety and Health Administration (OSHA). In addition to stronger enforcement, educating employers and workers about the importance and effectiveness of fall protection is crucial for compliance and fall prevention. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fatal falls and PFAS use in the construction industry: Findings from the NIOSH FACE reports

PubMed Central

Dong, Xiuwen Sue; Largay, Julie A.; Choi, Sang D.; Wang, Xuanwen; Cain, Chris Trahan; Romano, Nancy

2017-01-01

This study analyzed the Construction FACE Database (CFD), a quantitative database developed from reports of the Fatality Assessment and Control Evaluation (FACE) program conducted by the National Institute for Occupational Safety and Health (NIOSH). The CFD contains detailed data on 768 fatalities in the construction industry reported by NIOSH and individual states from 1982 through June 30, 2015. The results show that falls accounted for 42% (325) of the 768 fatalities included in the CFD. Personal fall arrest systems (PFAS) were not available to more than half of the fall decedents (54%); nearly one in four fall decedents (23%) had access to PFAS, but were not using it at the time of the fall. Lack of access to PFAS was particularly high among residential building contractors as well as roofing, siding, and sheet metal industry sectors (~70%). Although the findings may not represent the entire construction industry today, they do provide strong evidence in favor of fall protection requirements by the Occupational Safety and Health Administration (OSHA). In addition to stronger enforcement, educating employers and workers about the importance and effectiveness of fall protection is crucial for compliance and fall prevention. PMID:28292698

Computer systems and software engineering

NASA Technical Reports Server (NTRS)

Mckay, Charles W.

1988-01-01

The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

13. Photocopy of engineering drawing (original drawing located in WWP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Photocopy of engineering drawing (original drawing located in WWP Building, Transmission Department, Spokane, Washington). DIMENSIONS AND DETAILS OF STEEL TOWERS, LITTLE FALLS TIE LINE. - Little Falls Tie Line Towers, Near Little Dam Falls on Spokane River, Wellpinit, Stevens County, WA

Graduate Physics Education Adding Industrial Culture and Methods to a Traditional Graduate Physics Department

NASA Astrophysics Data System (ADS)

Vickers, Ken

2005-03-01

The education and training of the workforce needed to assure global competitiveness of American industry in high technology areas, along with the proper role of various disciplines in that educational process, is currently being re-examined. Several academic areas in science and engineering have reported results from such studies that revealed several broad themes of educational need that span and cross the boundaries of science and engineering. They included greater attention to and the development of team-building skills, personal or interactive skills, creative ability, and a business or entrepreneurial where-with-all. We will report in this paper the results of a fall 2000 Department of Education FIPSE grant to implement changes in its graduate physics program to address these issues. The proposal goal was to produce next-generation physics graduate students that are trained to evaluate and overcome complex technical problems by their participation in courses emphasizing the commercialization of technology research. To produce next-generation physics graduates who have learned to work with their student colleagues for their mutual success in an industrial-like group setting. And finally, to produce graduates who can lead interdisciplinary groups in solving complex problems in their career field.

Data linkage of inpatient hospitalization and workers' claims data sets to characterize occupational falls.

PubMed

Bunn, Terry L; Slavova, Svetla; Bathke, Arne

2007-07-01

The identification of industry, occupation, and associated injury costs for worker falls in Kentucky have not been fully examined. The purpose of this study was to determine the associations between industry and occupation and 1) hospitalization length of stay; 2) hospitalization charges; and 3) workers' claims costs in workers suffering falls, using linked inpatient hospitalization discharge and workers' claims data sets. Hospitalization cases were selected with ICD-9-CM external cause of injury codes for falls and payer code of workers' claims for years 2000-2004. Selection criteria for workers'claims cases were International Association of Industrial Accident Boards and Commissions Electronic Data Interchange Nature (IAIABCEDIN) injuries coded as falls and/or slips. Common data variables between the two data sets such as date of birth, gender, date of injury, and hospital admission date were used to perform probabilistic data linkage using LinkSolv software. Statistical analysis was performed with non-parametric tests. Construction falls were the most prevalent for male workers and incurred the highest hospitalization and workers' compensation costs, whereas most female worker falls occurred in the services industry. The largest percentage of male worker falls was from one level to another, while the largest percentage of females experienced a fall, slip, or trip (not otherwise classified). When male construction worker falls were further analyzed, laborers and helpers had longer hospital stays as well as higher total charges when the worker fell from one level to another. Data linkage of hospitalization and workers' claims falls data provides additional information on industry, occupation, and costs that are not available when examining either data set alone.

Electric Utility Transmission and Distribution Line Engineering Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peter McKenny

2010-08-31

Economic development in the United States depends on a reliable and affordable power supply. The nation will need well educated engineers to design a modern, safe, secure, and reliable power grid for our future needs. An anticipated shortage of qualified engineers has caused considerable concern in many professional circles, and various steps are being taken nationwide to alleviate the potential shortage and ensure the North American power system's reliability, and our world-wide economic competitiveness. To help provide a well-educated and trained workforce which can sustain and modernize the nation's power grid, Gonzaga University's School of Engineering and Applied Science hasmore » established a five-course (15-credit hour) Certificate Program in Transmission and Distribution (T&D) Engineering. The program has been specifically designed to provide working utility engineering professionals with on-line access to advanced engineering courses which cover modern design practice with an industry-focused theoretical foundation. A total of twelve courses have been developed to-date and students may select any five in their area of interest for the T&D Certificate. As each course is developed and taught by a team of experienced engineers (from public and private utilities, consultants, and industry suppliers), students are provided a unique opportunity to interact directly with different industry experts over the eight weeks of each course. Course material incorporates advanced aspects of civil, electrical, and mechanical engineering disciplines that apply to power system design and are appropriate for graduate engineers. As such, target students for the certificate program include: (1) recent graduates with a Bachelor of Science Degree in an engineering field (civil, mechanical, electrical, etc.); (2) senior engineers moving from other fields to the utility industry (i.e. paper industry to utility engineering or project management positions); and (3) regular working professionals wishing to update their skills or increase their knowledge of utility engineering design practices and procedures. By providing graduate educational opportunities for the above groups, the T&D Program will help serve a strong industry need for training the next generation of engineers in the cost-effective design, construction, operation, and maintenance of modern electrical transmission and distribution systems. In addition to developing the on-line engineering courses described above, the T&D Program also focused significant efforts towards enhancing the training opportunities available to power system operators in the northwest. These efforts have included working with outside vendors to provide NERC-approved training courses in Gonzaga University's (GU) system operator training facility, support for an accurate system model which can be used in regional blackstart exercises, and the identification of a retired system operator who could provide actual regional training courses. The GU system operator training facility is also being used to recruit young workers, veterans, and various under-represented groups to the utility industry. Over the past three years students from Columbia Gorge Community College, Spokane Falls Community College, Walla Walla Community College, Central Washington University, Eastern Washington University, Gonzaga University, and various local high schools have attended short (one-day) system operator training courses free of charge. These collaboration efforts has been extremely well received by both students and industry, and meet T&D Program objectives of strengthening the power industry workforce while bridging the knowledge base across power worker categories, and recruiting new workers to replace a predominantly retirement age workforce. In the past three years the T&D Program has provided over 170 utility engineers with access to advanced engineering courses, been involved in training more than 300 power system operators, and provided well over 500 college and high school students with an experience in running a power system simulator and an exposure to various utility-related professions and craft trades.« less

Non-fatal occupational falls on the same level.

PubMed

Yeoh, Han T; Lockhart, Thurmon E; Wu, Xuefang

2013-01-01

The purpose of this study was to describe antecedents and characteristics of same level fall injuries. Fall incidents and costs were compiled from the Bureau of Labor Statistics and other sources from 2006-2010. This study indicated that over 29% of 'fall on same level' injuries resulted in 31 or more workdays lost. The major source of injury was 'floors, walkways or ground surfaces', and the most affected body parts were the lower extremities and the trunk. With regard to gender and age, female workers had the highest risk of falls, while advancing age coincided with an increase in incidence rates. Overall, workers in the healthcare and social assistance industry, the transportation and warehousing industry, and the accommodation and food services industry had the highest risk for 'fall on same level' injuries. Furthermore, the overall compensation cost increased by 25% from 2006-2009. Along with existing evidence, these results may facilitate the design and implementation of preventative measures in the workplace and potentially reduce fall-related compensation costs. This research presents a unique and detailed analysis of non-fatal 'fall on same level' injuries in a large population of workers from various private industries in the USA. This information can be used to prioritise designing and implementing preventive measures and to provide workers with the understanding of risk factors associated with falls in the workplace.

Engineering Technology Enrollments Fall 1986.

ERIC Educational Resources Information Center

Ellis, Richard A.

1988-01-01

Provides some of the results of the Engineering Manpower Commission's fall 1986 survey of enrollments in engineering education. Includes tabular data on those enrollments categorized by students in all institutions surveyed and for just those students in accredited programs, as well as by curriculum and by school and state. (TW)

Non-Fatal Occupational Falls on the Same Level

PubMed Central

Yeoh, Han T.; Lockhart, Thurmon E.; Wu, Xuefang

2012-01-01

The purpose of this study was to describe antecedents and characteristics of same level fall injuries. Fall incidents and costs were compiled from the Bureau of Labor Statistics and other sources from 2006–2010. This study indicated that over 29% of “fall on same level” injuries resulted in 31 or more workdays lost. The major source of injury was “floors, walkways or ground surfaces” and the most affected body parts were the lower extremities and the trunk. In regards to gender and age, female workers had the highest risk of falls, while advancing age coincided with an increase in incidence rates. Overall, workers in the health care and social assistance industry, the transportation and warehousing industry, and the accommodation and food services industry had the highest risk for “fall on same level” injuries. Furthermore, the overall compensation cost increased 25% from 2006–2009. Along with existing evidence, these results may facilitate the design and implementation of preventative measures in the workplace and potentially reduce fall-related compensation costs. PMID:23216368

A comparison of the burden and resultant risk associated with occupational falls from a height and on the same level in Australia.

PubMed

Mangharam, Jean; Moorin, Rachael; Straker, Leon

2016-12-01

Occupational falls are one of the leading causes of occupational injury and death internationally. This study described the nature of occupational falls following an analysis of workers compensation data in Western Australia. Frequencies, proportions and incidence rates were calculated following mechanism, gender, age and industry stratification. The natures of injury and bodily locations affected were compared between mechanisms of fall. Industry incidence rates were ranked and their corresponding proportions reported. Cost and lost time were described and risk scores for each burden type (incapacity, cost and lost time) were calculated and compared between fall mechanisms. Of all occupational falls, the proportion, incidence rates and risk scores of falls on same level were consistently greater compared to falls from a height. Gender, age and industry groups that appear to be at highest risk vary with the measure used and mechanism of incident. This study translates epidemiological information into a risk score that can aid in prioritisation. Practitioner Summary: This paper presents an in-depth analysis of Worker's Compensation claims for falls in Western Australia. Calculated proportion, incidence rates and formulated risk scores for falls on the level were consistently greater compared to falls from a height. Limitations associated with the analysis of large-scale data-sets are described.

15. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering drawings, dated 1917, by U.S. Army Corps of Engineers. Drawing in possession of U.S. Army Corps of Engineers, Sault Ste. Marie, Michigan. General plan of locks in 1990's - St. Mary's Falls Canal, Soo Locks, St. Mary's River at Falls, Sault Ste. Marie, Chippewa County, MI

The NASA-sponsored Maryland center for hypersonic education and research

NASA Technical Reports Server (NTRS)

Lewis, Mark J.; Gupta, Ashwani K.

1995-01-01

The Office of Aeronautics of the National Aeronautics and Space Administration has established a program to support university programs in the field of hypersonic flight. Beginning in the fall of 1993, three universities, including the University of Maryland at College Park, were selected to participate in this activity. The program at the University of Maryland includes faculty in the Department of Aerospace Engineering and Department of Mechanical Engineering, and provides a multidisciplinary environment for graduate and undergraduate students to study and conduct research in the field of hypersonic flight. Ongoing projects cover the range of applications from cruisers through transatmospheric and reentry vehicles. Research activities, focused on propulsion, fluid dynamics, inverse design, and vehicle optimization and integration, are conducted in conjuntion with industrial partners and government laboratories.

Non-fatal construction industry fall-related injuries treated in US emergency departments, 1998-2005.

PubMed

Shishlov, Kirill S; Schoenfisch, Ashley L; Myers, Douglas J; Lipscomb, Hester J

2011-02-01

There is a growing recognition that common occupational injury surveillance systems in the US fail to reflect true injury risk; this failure limits efforts to accurately monitor efforts to prevent work-related injuries on a national level. Data from the National Electronic Injury Surveillance System occupational supplement (NEISS-Work) were used to describe fall-related injuries treated in US emergency departments among workers in the construction industry (1998-2005). These data do not require workers' compensation as the payer in order to be classified as work-related. Based on NEISS-Work estimates, a total of 555,700 (95% confidence interval (CI): 390,700-720,800) non-fatal work-related injuries among workers in the construction industry were the result of a fall, resulting in an annual rate of 70 (95% CI: 49-91) per 10,000 full-time equivalents. Younger workers had higher rates of falls, whereas older workers were more likely to suffer serious injuries. The majority of the injuries (70%) were precipitated by falls to a lower level from roofs, ladders, and scaffolding. The patterns of fall-related injuries identified in these data are consistent with other reports. In contrast to the declining rates of falls requiring days away from work reported through the Bureau of Labor Statistics Survey of Occupational Injuries and Illnesses, construction industry fall-related injury rates estimated through NEISS-Work remained unchanged from 1998 to 2005 providing another perspective on this serious cause of morbidity in the construction industry. Copyright © 2010 by John Wiley & Sons, Ltd.

Same-level fall injuries in US workplaces by age group, gender, and industry.

PubMed

Scott, Kenneth A; Fisher, Gwenith G; Barón, Anna E; Tompa, Emile; Stallones, Lorann; DiGuiseppi, Carolyn

2018-02-01

As the workforce ages, occupational injuries from falls on the same level will increase. Some industries may be more affected than others. We conducted a cross-sectional study using data from the Bureau of Labor Statistics to estimate same-level fall injury incidence rates by age group, gender, and industry for four sectors: 1) healthcare and social assistance; 2) manufacturing; 3) retail; and 4) transportation and warehousing. We calculated rate ratios and rate differences by age group and gender. Same-level fall injury incidence rates increase with age in all four sectors. However, patterns of rate ratios and rate differences vary by age group, gender, and industry. Younger workers, men, and manufacturing workers generally have lower rates. Variation in incidence rates suggests there are unrealized opportunities to prevent same-level fall injuries. Interventions should be evaluated for their effectiveness at reducing injuries, avoiding gender- or age-discrimination and improving work ability. © 2017 Wiley Periodicals, Inc.

14. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering drawings, dated 1917, by U.S. Army Corps of Engineers. Drawing in possession of U.S. Army Corps of Engineers, Sault Ste. Marie, Michigan. General plan of locks prior to completion of Sabin (fourth) Lock - St. Mary's Falls Canal, Soo Locks, St. Mary's River at Falls, Sault Ste. Marie, Chippewa County, MI

16. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering drawings, dated 1915, by U.S. Army Corps of Engineers. Drawing in possession of U.S. Army Corps of Engineers, Sault Ste. Marie, Michigan. Filling and emptying culvert butterfly valve and hydraulic piston. - St. Mary's Falls Canal, Soo Locks, Sabin Lock Subcomplex, Sabin Lock, St. Mary's River at Falls, Sault Ste. Marie, Chippewa County, MI

9. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering drawings, dated 1912, by U.S. Army Corps of Engineers. Drawing in possession of U.S. Army Corps of Engineers, Sault Ste. Marie, Michigan. Filling and emptying culvert butterfly valve and hydraulic piston. - St. Mary's Falls Canal, Soo Locks, Davis Lock Subcomplex, Davis Lock, St. Mary's River at Falls, Sault Ste. Marie, Chippewa County, MI

8. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering drawings, dated 1911, by U.S. Army Corps of Engineers. Drawings in possession of U.S. Army Corps of Engineers, Sault Ste. Marie, Michigan. General plan of hydraulic accumulator, exhaust reservoir, and pressure pumps. - St. Mary's Falls Canal, Soo Locks, Davis Lock Subcomplex, Southwest Operating Shelter, St. Mary's River at Falls, Sault Ste. Marie, Chippewa County, MI

10. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering drawings, dated 1912, by U.S. Army Corps of Engineers. Drawing in possession of U.S. Army Corps of Engineers, Sault Ste. Marie, Michigan. Hydraulic accumulator and pressure pumping plant for east end of Davis Lock. - St. Mary's Falls Canal, Soo Locks, Davis Lock Subcomplex, Davis Lock, St. Mary's River at Falls, Sault Ste. Marie, Chippewa County, MI

Blast from the past

NASA Astrophysics Data System (ADS)

Carlowicz, Michael

1996-02-01

Forget dynamite or hydraulic and mechanical drills. Industrial and federal researchers have started boring holes with rocket fuel. In a cooperative arrangement between Sandia National Laboratory, Global Environmental Solutions, and Universal Tech Corp., scientists and engineers extracted fuel from 200 rocket motors and used it as a mining explosive. In a demonstration completed last fall, researchers used 4950 kg of solid rocket propellant to move more than 22,500 metric tons of rock from the Lone Star Quarry in Prairie, Oklahoma. They found that the fuel improved blast energy and detonation velocity over traditional explosives, and it required fewer drill holes.

Hazardous Waste Cleanup: Kearfott Guidance & Navigation Corporation in Little Falls, New Jersey

EPA Pesticide Factsheets

Kearfott Guidance & Navigation Corp. manufactures navigation and guidance systems, gyroscopes, and other electro-mechanical products for the aerospace industry at its Little Falls, New Jersey facility. The facility is located in a mixed industrial

Occupational Fatalities Resulting from Falls in the Oil and Gas Extraction Industry, United States, 2005-2014.

PubMed

Mason, Krystal L; Retzer, Kyla D; Hill, Ryan; Lincoln, Jennifer M

2017-04-28

During 2003-2013, fatality rates for oil and gas extraction workers decreased for all causes of death except those associated with fall events, which increased 2% annually during 2003-2013 (1). To better understand risk factors for these events, CDC examined fatal fall events in the oil and gas extraction industry during 2005-2014 using data from case investigations conducted by the Occupational Safety and Health Administration (OSHA). Sixty-three fatal falls were identified, accounting for 15% of all fatal events. Among fatal falls, 33 (52%) workers fell from a height of >30 feet (9 meters), and 22 (35%) fell from the derrick board, the elevated work platform located in the derrick (structure used to support machinery on a drilling rig). Fall fatalities occurred most frequently when drilling rigs were being assembled or disassembled at the well site (rigging up or rigging down) (14; 22%) or when workers were removing or inserting drill pipe into the wellbore (14; 22%). Measures that target derrickmen and workers engaged in assembling and disassembling drilling rigs (rigging up and down) could reduce falls in this industry. Companies should annually update their fall protection plans and ensure effective fall prevention programs are in place for workers at highest risk for falls, including providing trainings on proper use, fit, and inspection of personal protective equipment.

77 FR 25495 - Proposed Flood Hazard Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-30

... Docket No. FEMA-B-1250, to Luis Rodriguez, Chief, Engineering Management Branch, Federal Insurance [email protected] . FOR FURTHER INFORMATION CONTACT: Luis Rodriguez, Chief, Engineering Management... Mechanic Falls Town Office, 108 Lewiston Street, Mechanic Falls, ME 04256. Town of Minot Town Office, 329...

5. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Wayne Chandler, Photographer, May 2000 Photographic copy of engineering drawings, dated 1912, by U.S. Army Corps of Engineers. Drawing in possession of U.S. Army Corps of Engineers, Sault Ste. Marie, Michigan. General plan of wide walls showing location of filling and emptying culvert intakes and discharges, as well as cable system for operating gates. - St. Mary's Falls Canal, Soo Locks, Davis Lock Subcomplex, Davis Lock, St. Mary's River at Falls, Sault Ste. Marie, Chippewa County, MI

California motor vehicle pollution control: emission control system warranty regulations waiver of federal preemption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-10-23

The U.S. Environmental Protection Agency has decided that the California Air Resources Board's (CARB) regulations on emission control system warranties for motor vehicles and engines sold in the state fall within the scope of previous waivers of federal preemption under the Clean Air Act; that they are neither standards nor enforcement procedures; and that they need not receive a separate waiver of federal preemption for their enforcement. Adopted on 12/14/78, the CARB regulations apply to all California certified 1973 and subsequent model year motorcycles, light-, medium-, and heavy-duty motor vehicles and engines. The decision, which followed a 5/17/79 public hearingmore » in San Francisco, Calif., will affect not only California motor vehicle manufacturers and industries but also those outside the state which sell the subject vehicles in California, thus, making it one of nationwide scope and effect.« less

Environment-friendly drilling operation technology

NASA Astrophysics Data System (ADS)

Luo, Huaidong; Jing, Ning; Zhang, Yanna; Huang, Hongjun; Wei, Jun

2017-01-01

Under the circumstance that international safety and environmental standards being more and more stringent, drilling engineering is facing unprecedented challenges, the extensive traditional process flow is no longer accepted, the new safe and environment-friendly process is more suitable to the healthy development of the industry. In 2015, CNPCIC adopted environment-friendly drilling technology for the first time in the Chad region, ensured the safety of well control, at the same time increased the environmental protection measure, reduced the risk of environmental pollution what obtain the ratification from local government. This technology carries out recovery and disposal of crude oil, cuttings and mud without falling on the ground. The final products are used in road and well site construction, which realizes the reutilization of drilling waste, reduces the operating cost, and provides a strong technical support for cost-cutting and performance-increase of drilling engineering under low oil price.

The Rise and Fall of American Technology Policy: Elite Beliefs and the Clinton Industrial Policy.

ERIC Educational Resources Information Center

Pages, Erik R.

1996-01-01

Uses the rapid rise and fall (within two years) of Clinton's industrial technology policy as an example of the creation and delegitimization of political ideas in federal government. Compares the shifting opinions on this policy to similar experiences with other policies, most notably nuclear power. (MJP)

Age related effects of transitional floor surfaces and obstruction of view on gait characteristics related to slips and falls

PubMed Central

Bunterngchit, Yuthachai; Lockhart, Thurmon; Woldstad, Jeffrey C.; Smith, James L.

2010-01-01

A laboratory study was conducted to examine gait changes between younger and older subjects as they walked across different floor surfaces. Twenty subjects participated in the experiment (five each of older and younger males and females). For half of the trials, subjects carried light loads that blocked their view of the floor surface immediately in front of them. Subjects walked on slippery (soapy water on vinyl) and stable (outdoor carpet) floor surfaces, as well as transitioning from one surface to another. Responses studied included: required coefficient of friction (RCOF), stride length (SL), and minimum toe clearance (MTC). Significant effects were found for the floor surface, load versus no load condition, and some interactions involving age (older versus younger subjects). Not all expected differences due to age were found in this experiment. The lack of significant differences between younger and older subjects could be due to the older subjects that participated in the experiment. They were volunteers at a local medical center, were in good physical shape, and were probably not typical of the population of people over 65 years of age. Relevance to industry Slips and falls in industry are costly safety issues in terms of human suffering as well as financial compensation. In many facilities and at home, people make transitions from one floor surface to another many times each day, while carrying loads or just walking. A better understanding of characteristics of people as they walk on slippery floor surfaces and the changes that might occur with age, will allow engineers to design better floor surfaces to reduce the incidence of slips and falls. PMID:20607122

Pedestrian falling accidents in transit terminals

DOT National Transportation Integrated Search

1985-02-01

Falls are the second leading cause of accidental injury in the U.S. Based on reports to the Federal Railroad Administration, the rail transit industry carried 7.25 billion passengers (1976-1980) and these patrons experienced about 10,000 station fall...

Analysis of the causes and consequences of falls from scaffolding using the Polish construction industry as an example

NASA Astrophysics Data System (ADS)

Hoła, A.; Hoła, B.; Szóstak, M.

2017-10-01

The results of research published in many publications indicate that the scale of the problem of accidents at work in the construction industry is significant. Fatal and serious accidents, which in the construction industry are often a result of a fall from a height and associated with working on scaffolding, have a particularly strong impact on society. Systematic controls carried out on Polish construction sites indicate irregularities in the area of ensuring safety on scaffolding. As a result of conducted own studies, dozens of accidents caused by falls from scaffolding were selected from the total number of accidents at work in the construction industry and then analysed. The aim of the research was to identify the causes of these accidents and their consequences. The results of studies conducted in this area will be the content of the article.

Adaptive Systems Engineering: A Medical Paradigm for Practicing Systems Engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Douglas Hamelin; Ron D. Klingler; Christopher Dieckmann

2011-06-01

From its inception in the defense and aerospace industries, SE has applied holistic, interdisciplinary tools and work-process to improve the design and management of 'large, complex engineering projects.' The traditional scope of engineering in general embraces the design, development, production, and operation of physical systems, and SE, as originally conceived, falls within that scope. While this 'traditional' view has expanded over the years to embrace wider, more holistic applications, much of the literature and training currently available is still directed almost entirely at addressing the large, complex, NASA and defense-sized systems wherein the 'ideal' practice of SE provides the cradle-to-gravemore » foundation for system development and deployment. Under such scenarios, systems engineers are viewed as an integral part of the system and project life-cycle from conception to decommissioning. In far less 'ideal' applications, SE principles are equally applicable to a growing number of complex systems and projects that need to be 'rescued' from overwhelming challenges that threaten imminent failure. The medical profession provides a unique analogy for this latter concept and offers a useful paradigm for tailoring our 'practice' of SE to address the unexpected dynamics of applying SE in the real world. In short, we can be much more effective as systems engineers as we change some of the paradigms under which we teach and 'practice' SE.« less

33 CFR 207.440 - St. Marys Falls Canal and Locks, Mich.; use, administration, and navigation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false St. Marys Falls Canal and Locks.... Marys Falls Canal and Locks, Mich.; use, administration, and navigation. (a) The use, administration... by radiotelephone to the Corps of Engineers Chief Lockmaster at St. Marys Falls Canal dispatch tower...

33 CFR 207.440 - St. Marys Falls Canal and Locks, Mich.; use, administration, and navigation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false St. Marys Falls Canal and Locks.... Marys Falls Canal and Locks, Mich.; use, administration, and navigation. (a) The use, administration... by radiotelephone to the Corps of Engineers Chief Lockmaster at St. Marys Falls Canal dispatch tower...

33 CFR 207.440 - St. Marys Falls Canal and Locks, Mich.; use, administration, and navigation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false St. Marys Falls Canal and Locks.... Marys Falls Canal and Locks, Mich.; use, administration, and navigation. (a) The use, administration... by radiotelephone to the Corps of Engineers Chief Lockmaster at St. Marys Falls Canal dispatch tower...

5. HISTORIC PHOTOGRAPH OF FIRST CHRISTINE FALLS BRIDGE, BUILT BY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. HISTORIC PHOTOGRAPH OF FIRST CHRISTINE FALLS BRIDGE, BUILT BY U.S. ARMY CORPS OF ENGINEERS CA. 1908. PHOTOGRAPHER TAKEN 1911. MOUNT RAINIER NATIONAL PARK ARCHIVES - Christine Falls Bridge, Spanning Van Trump Creek on Nisqually Road, Longmire, Pierce County, WA

Free Fall Misconceptions: Results of a Graph Based Pre-Test of Sophomore Civil Engineering Students

ERIC Educational Resources Information Center

Montecinos, Alicia M.

2014-01-01

A partially unusual behaviour was found among 14 sophomore students of civil engineering who took a pre test for a free fall laboratory session, in the context of a general mechanics course. An analysis contemplating mathematics models and physics models consistency was made. In all cases, the students presented evidence favoring a correct free…

Fall 2014 SEI Research Review High Confidence Cyber Physical Systems

DTIC Science & Technology

2014-10-28

2014 Carnegie Mellon University Fall 2014 SEI Research Review High Confidence Cyber Physical Systems Software Engineering Institute Carnegie... Research Review de Niz Oct 28th, 2014 © 2014 Carnegie Mellon University Copyright 2014 Carnegie Mellon University This material is based upon work...Software Engineering Institute, a federally funded research and development center. Any opinions, findings and conclusions or recommendations expressed

An engineering rock classification to evaluate seismic rock-fall susceptibility and its application to the Wasatch Front

USGS Publications Warehouse

Harp, E.L.; Noble, M.A.

1993-01-01

Investigations of earthquakes world wide show that rock falls are the most abundant type of landslide that is triggered by earthquakes. An engineering classification originally used in tunnel design, known as the rock mass quality designation (Q), was modified for use in rating the susceptibility of rock slopes to seismically-induced failure. Analysis of rock-fall concentrations and Q-values for the 1980 earthquake sequence near Mammoth Lakes, California, defines a well-constrained upper bound that shows the number of rock falls per site decreases rapidly with increasing Q. Because of the similarities of lithology and slope between the Eastern Sierra Nevada Range near Mammoth Lakes and the Wasatch Front near Salt Lake City, Utah, the probabilities derived from analysis of the Mammoth Lakes region were used to predict rock-fall probabilities for rock slopes near Salt Lake City in response to a magnitude 6.0 earthquake. These predicted probabilities were then used to generalize zones of rock-fall susceptibility. -from Authors

78 FR 14577 - Final Flood Hazard Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... above. FOR FURTHER INFORMATION CONTACT: Luis Rodriguez, Chief, Engineering Management Branch, Federal... Office, 2 Main Street, Livermore Falls, ME 04254. Town of Mechanic Falls Town Office, 108 Lewiston Street, Mechanic Falls, ME 04256. Town of Minot Town Office, 329 Woodman Hill Road, Minot, ME 04258. Town of Poland...

Predicting Performance in a First Engineering Calculus Course: Implications for Interventions

ERIC Educational Resources Information Center

Hieb, Jeffrey L.; Lyle, Keith B.; Ralston, Patricia A. S.; Chariker, Julia

2015-01-01

At the University of Louisville, a large, urban institution in the south-east United States, undergraduate engineering students take their mathematics courses from the school of engineering. In the fall of their freshman year, engineering students take "Engineering Analysis I," a calculus-based engineering analysis course. After the…

Sanitary engineering aspects of nuclear energy developments*

PubMed Central

Kenny, A. W.

1962-01-01

So many developments have taken place in the field of nuclear energy since 1956, when the author's previous paper on radioactive waste disposal was published in the Bulletin of the World Health Organization, that a fresh review of the subject is now appropriate. The present paper deals with those aspects of the problem which are of most interest to the sanitary engineer. It considers specific points in the latest recommendations of the International Commission on Radiological Protection in relation to public drinking-water supplies, and examines the problem of fall-out, with special reference to the presence and significance of strontium-90 in drinking-water. A general survey of the various uses of radioactive materials is followed by a discussion of the legislative and control measures necessary to ensure safe disposal of wastes. The methods of waste disposal adopted in a number of nuclear energy establishments are described in detail. The paper concludes with some remarks on solid waste disposal, siting of nuclear energy industries and area monitoring. PMID:14455214

Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Holloway

2005-09-30

Beginning the fall semester of 1999, The University of Maryland, Departments of Mechanical and Electrical Engineering and the Institute for Systems Research served as a U.S. Department of Energy (USDOE) Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies. A key goal was to produce a graduate level education program that educated and prepared students to address the technical challenges of designing and developing hybrid electric vehicles, as they progressed into the workforce. A second goal was to produce research that fostered the advancement of hybrid electric vehicles, their controls, and other related automotive technologies. Participationmore » ended at the University of Maryland after the 2004 fall semester. Four graduate courses were developed and taught during the course of this time, two of which evolved into annually-taught undergraduate courses, namely Vehicle Dynamics and Control Systems Laboratory. Five faculty members from Mechanical Engineering, Electrical Engineering, and the Institute for Systems Research participated. Four Ph.D. degrees (two directly supported and two indirectly supported) and seven Master's degrees in Mechanical Engineering resulted from the research conducted. Research topics included thermoelectric waste heat recovery, fuel cell modeling, pre- and post-transmission hybrid powertrain control and integration, hybrid transmission design, H{sub 2}-doped combustion, and vehicle dynamics. Many of the participating students accepted positions in the automotive industry or government laboratories involved in automotive technology work after graduation. This report discusses the participating faculty, the courses developed and taught, research conducted, the students directly and indirectly supported, and the publication list. Based on this collection of information, the University of Maryland firmly believes that the key goal of the program was met and that the majority of the participating students are now contributing to the advancement of automotive technology in this country.« less

Hazardous Waste Cleanup: General Electric - Hudson Falls in Hudson Falls, New York

EPA Pesticide Factsheets

This 25-acre site is within an area of residential and industrial zoning in the Village of Hudson Falls. The site is generally flat, but has a near-vertical drop to the Hudson River along its western boundary. The facility has been divided into four areas

Productivity improvement through industrial engineering in the semiconductor industry

NASA Astrophysics Data System (ADS)

Meyersdorf, Doron

1996-09-01

Industrial Engineering is fairly new to the semiconductor industry, though the awareness to its importance has increased in recent years. The US semiconductor industry in particular has come to the realization that in order to remain competitive in the global market it must take the lead not only in product development but also in manufacturing. Industrial engineering techniques offer one ofthe most effective strategies for achieving manufacturing excellence. Industrial engineers play an important role in the success of the manufacturing facility. This paper defines the Industrial engineers role in the IC facility, set the visions of excellence in semiconductor manufacturing and highlights 10 roadblocks on the journey towards manufacturing excellence.

Mobile Source Emissions Regulatory Compliance Data Inventory

EPA Pesticide Factsheets

The Mobile Source Emissions Regulatory Compliance Data Inventory data asset contains measured summary compliance information on light-duty, heavy-duty, and non-road engine manufacturers by model, as well as fee payment data required by Title II of the 1990 Amendments to the Clean Air Act, to certify engines for sale in the U.S. and collect compliance certification fees. Data submitted by manufacturers falls into 12 industries: Heavy Duty Compression Ignition, Marine Spark Ignition, Heavy Duty Spark Ignition, Marine Compression Ignition, Snowmobile, Motorcycle & ATV, Non-Road Compression Ignition, Non-Road Small Spark Ignition, Light-Duty, Evaporative Components, Non-Road Large Spark Ignition, and Locomotive. Title II also requires the collection of fees from manufacturers submitting for compliance certification. Manufacturers submit data on an annual basis, to document engine model changes for certification. Manufacturers also submit compliance information on already certified in-use vehicles randomly selected by the EPA (1) year into their life and (4) years into their life to ensure that emissions systems continue to function appropriately over time.The EPA performs targeted confirmatory tests on approximately 15% of vehicles submitted for certification. Confirmatory data on engines is associated with its corresponding submission data to verify the accuracy of manufacturer submission beyond standard business rules.Section 209 of the 1990 Amendments to the Clea

Epidemiology of occupational accidents in iran based on social security organization database.

PubMed

Mehrdad, Ramin; Seifmanesh, Shahdokht; Chavoshi, Farzaneh; Aminian, Omid; Izadi, Nazanin

2014-01-01

Today, occupational accidents are one of the most important problems in industrial world. Due to lack of appropriate system for registration and reporting, there is no accurate statistics of occupational accidents all over the world especially in developing countries. The aim of this study is epidemiological assessment of occupational accidents in Iran. Information of available occupational accidents in Social Security Organization was extracted from accident reporting and registration forms. In this cross-sectional study, gender, age, economic activity, type of accident and injured body part in 22158 registered accidents during 2008 were described. The occupational accidents rate was 253 in 100,000 workers in 2008. 98.2% of injured workers were men. The mean age of injured workers was 32.07 ± 9.12 years. The highest percentage belonged to age group of 25-34 years old. In our study, most of the accidents occurred in basic metals industry, electrical and non-electrical machines and construction industry. Falling down from height and crush injury were the most prevalent accidents. Upper and lower extremities were the most common injured body parts. Due to the high rate of accidents in metal and construction industries, engineering controls, the use of appropriate protective equipment and safety worker training seems necessary.

Epidemiology of Occupational Accidents in Iran Based on Social Security Organization Database

PubMed Central

Mehrdad, Ramin; Seifmanesh, Shahdokht; Chavoshi, Farzaneh; Aminian, Omid; Izadi, Nazanin

2014-01-01

Background: Background: Today, occupational accidents are one of the most important problems in industrial world. Due to lack of appropriate system for registration and reporting, there is no accurate statistics of occupational accidents all over the world especially in developing countries. Objectives: The aim of this study is epidemiological assessment of occupational accidents in Iran. Materials and Methods: Information of available occupational accidents in Social Security Organization was extracted from accident reporting and registration forms. In this cross-sectional study, gender, age, economic activity, type of accident and injured body part in 22158 registered accidents during 2008 were described. Results: The occupational accidents rate was 253 in 100,000 workers in 2008. 98.2% of injured workers were men. The mean age of injured workers was 32.07 ± 9.12 years. The highest percentage belonged to age group of 25-34 years old. In our study, most of the accidents occurred in basic metals industry, electrical and non-electrical machines and construction industry. Falling down from height and crush injury were the most prevalent accidents. Upper and lower extremities were the most common injured body parts. Conclusion: Due to the high rate of accidents in metal and construction industries, engineering controls, the use of appropriate protective equipment and safety worker training seems necessary. PMID:24719699

Fatal occupational injuries in the North Carolina construction industry, 1978-1994.

PubMed

Jackson, Seronda A; Loomis, Dana

2002-01-01

Occupational injury is a major public health problem and the cause of high rates of fatalities. The construction industry is one of the leading industries for on-the-job fatalities. The North Carolina Medical Examiner's system was used to identify all fatal unintentional injuries that occurred on the job in the state's construction industry between 1978 and 1994. The populations at risk were estimated from the 1980 and 1990 U.S. censuses. There were 525 identified deaths. All except two decedents were male, and the majority were Caucasian (79.2%). The mean age of decedents was 39 years. Death rates were higher among older workers. The crude fatality rate for the overall study period was 15.4 per 100,000 worker-years, with higher rates found among African-Americans (22.9) than among Caucasians (14.5). Occupations within the industry with the highest rates were laborers (49.5), truck drivers (43.2), operating engineers (37.2), roofers (32.8), and electricians (29.0). Falls (26.7%), electrocutions (20.4%), and motor vehicle accidents (18.9%) were found to be the leading causes of death. These findings suggest a need for continued attention to the hazards of heights and electric currents and a need for occupational safety standards for motor vehicles. This study also suggests that the hazards facing construction laborers require further investigation.

Job Prospects for Industrial Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1988-01-01

Discusses 1987 statistics from the College Placement Council regarding new job offers to graduating industrial engineers. Identifies trends in hiring in the field. Describes several issues that will face industrial engineers. States that the industrial engineers most likely to win jobs are those with good basic mathematics and communications…

Replacing The Engine In Your Car While You Are Still Driving It [PowerPoint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bjorklund, Eric A.

The scope of the project included the following: install new network backbone, replace 201 MHz rf tubes, replace low-level rf system, replace timing system, replace industrial I/O system, replace beam synchronous data acquisition system, replace fast protect reporting system, new wire scanner hardware, and new beam position/phase monitor hardware--all of this to be done while continuing to deliver beam to users. Lessons learned, for anyone contemplating a similarly ambitious upgrade: You can’t replace the whole system at once. Some compatibility must be maintained between the old and new systems. Always have a way to fall back. Have sympathy for themore » operations staff. You will be surprised.« less

Productivity improvement through industrial engineering in the semiconductor industry

NASA Astrophysics Data System (ADS)

Meyersdorf, Doron

1996-09-01

Industrial engineering is fairly new to the semiconductor industry, though the awareness to its importance has increased in recent years. The U.S. semiconductor industry in particular has come to the realization that in order to remain competitive in the global market it must take the lead not only in product development but also in manufacturing. Industrial engineering techniques offer one of the most effective strategies for achieving manufacturing excellence. Industrial engineers play an important role in the success of the manufacturing facility. This paper defines the industrial engineers role in the IC facility, sets the visions of excellence in semiconductor manufacturing and highlights 10 roadblocks on the journey towards manufacturing excellence.

A ZigBee-Based Location-Aware Fall Detection System for Improving Elderly Telecare

PubMed Central

Huang, Chih-Ning; Chan, Chia-Tai

2014-01-01

Falls are the primary cause of accidents among the elderly and frequently cause fatal and non-fatal injuries associated with a large amount of medical costs. Fall detection using wearable wireless sensor nodes has the potential of improving elderly telecare. This investigation proposes a ZigBee-based location-aware fall detection system for elderly telecare that provides an unobstructed communication between the elderly and caregivers when falls happen. The system is based on ZigBee-based sensor networks, and the sensor node consists of a motherboard with a tri-axial accelerometer and a ZigBee module. A wireless sensor node worn on the waist continuously detects fall events and starts an indoor positioning engine as soon as a fall happens. In the fall detection scheme, this study proposes a three-phase threshold-based fall detection algorithm to detect critical and normal falls. The fall alarm can be canceled by pressing and holding the emergency fall button only when a normal fall is detected. On the other hand, there are three phases in the indoor positioning engine: path loss survey phase, Received Signal Strength Indicator (RSSI) collection phase and location calculation phase. Finally, the location of the faller will be calculated by a k-nearest neighbor algorithm with weighted RSSI. The experimental results demonstrate that the fall detection algorithm achieves 95.63% sensitivity, 73.5% specificity, 88.62% accuracy and 88.6% precision. Furthermore, the average error distance for indoor positioning is 1.15 ± 0.54 m. The proposed system successfully delivers critical information to remote telecare providers who can then immediately help a fallen person. PMID:24743841

Towards a light-weight query engine for accessing health sensor data in a fall prevention system.

PubMed

Kreiner, Karl; Gossy, Christian; Drobics, Mario

2014-01-01

Connecting various sensors in sensor networks has become popular during the last decade. An important aspect next to storing and creating data is information access by domain experts, such as researchers, caretakers and physicians. In this work we present the design and prototypic implementation of a light-weight query engine using natural language processing for accessing health-related sensor data in a fall prevention system.

Fall from Grace: The Decline of America

ERIC Educational Resources Information Center

Schnepper, Jeff A.; Schnepper, Barbara

1976-01-01

Asks whether the United States is about to join the Roman Empire as a historical lesson of inevitable rise and fall. The government, economic and industrial leaders, and social scientists are examined. (Editor/RK)

Occupational safety issues in residential construction surveyed in Wisconsin, United States.

PubMed

Choi, Sang D; Carlson, Kathryn

2014-01-01

Residential construction is a high-risk industry in the U.S. due to the exposure to work-related safety hazards and fall injuries. This study aimed to examine the safety training and safe work practices of construction workers within the small residential construction industry. In order to achieve the study objectives, a survey was designed and sent to approximately 200 Wisconsin based residential construction contractors. About one third of the respondents stated that they did not have any form of safety programs. The study indicated that the most common types of work-related injuries in residential construction were slips/trips/falls and cuts/lacerations. The survey findings also suggested that the residential construction contractors needed to increase the utilization of fall protection safety equipment. Further education and subject matter expert training could provide benefits to improve occupational safety and health of the small business workforce in the residential construction industry.

Occupational Safety Issues in Residential Construction Surveyed in Wisconsin, United States

PubMed Central

CHOI, Sang D.; CARLSON, Kathryn

2014-01-01

Residential construction is a high-risk industry in the U.S. due to the exposure to work-related safety hazards and fall injuries. This study aimed to examine the safety training and safe work practices of construction workers within the small residential construction industry. In order to achieve the study objectives, a survey was designed and sent to approximately 200 Wisconsin based residential construction contractors. About one third of the respondents stated that they did not have any form of safety programs. The study indicated that the most common types of work-related injuries in residential construction were slips/trips/falls and cuts/lacerations. The survey findings also suggested that the residential construction contractors needed to increase the utilization of fall protection safety equipment. Further education and subject matter expert training could provide benefits to improve occupational safety and health of the small business workforce in the residential construction industry. PMID:25016947

Industrial and Systems Engineering Applications in NASA

NASA Technical Reports Server (NTRS)

Shivers, Charles H.

2006-01-01

A viewgraph presentation on the many applications of Industrial and Systems Engineering used for safe NASA missions is shown. The topics include: 1) NASA Information; 2) Industrial Engineering; 3) Systems Engineering; and 4) Major NASA Programs.

Data Documentation for Navy Civilian Manpower Study,

DTIC Science & Technology

1986-09-01

Engineering 0830 Mechanical Engineer 0840 Nuclear Engineering 0850 Electrical Engineering 0855 Electronics Engineering 0856 Electronics ...OCCUPATIONAL LEVEL (DONOL) CODES DONOL code Title 1060 Engineering Drafting 1061 Electronics Technician w 1062 Engineering Technician 1063 Industrial...Architect 2314 Electrical Engineer 2315 Electronic Engineer 2316 Industrial Engineer 2317 Mechanical Engineer 2318

Work-related falls among union carpenters in Washington State before and after the Vertical Fall Arrest Standard.

PubMed

Lipscomb, Hester J; Li, Leiming; Dement, John

2003-08-01

Washington State enacted a change in their fall standard for the construction industry in 1991, preceding the Safety Standard for Fall Protection in the Construction Industry promulgated by Federal OSHA in 1994. We evaluated changes in the rate of falls from elevations and measures of severity among a large cohort of union carpenters after the fall standard change in Washington State, taking into account the temporal trends in their overall injury rates. There was a significant decrease in the rate of falls from height after the standard went into effect, even after adjusting for the overall decrease in work-related injuries among this cohort. Much of the decrease was immediate, likely representing the publicity surrounding fatal falls and subsequent promulgation of the standard. The greatest decrease was seen between 3 and 3(1/2) years after the standard went into effect. There was a significant reduction in mean paid lost days per event after the standard change and there was a significant reduction in mean cost per fall when adjusting for age and the temporal trend for costs among non-fall injuries. Through the use of observational methods we have demonstrated significant effects of the Washington State Vertical Fall Arrest Standard among carpenters in the absence of a control or comparison group. Without controlling for the temporal trend in overall injury rates, the rate of decline in falls appeared significantly greater, but the more pronounced, but delayed, decline was not seen. The analyses demonstrate potential error in failing to account for temporal patterns or assuming that a decline after an intervention is related to the intervention. Copyright 2003 Wiley-Liss, Inc.

Retention, Success, and Satisfaction of Engineering Students Based on the First-Year Experience

ERIC Educational Resources Information Center

Prendergast, Lydia Q.

2013-01-01

A project-based course for first-year engineering students, called Engineering Exploration, was created an implemented with the goals of increasing retention, providing professional skills, increasing interest about engineering, and to aide in choosing an engineering major. Over 100 students have taken the course since its inception in Fall 2009.…

Activities Related to Systems Engineering

DTIC Science & Technology

2004-12-01

competencies include weapons technology including WMD; information management; modeling and simulation; operations analysis; chemical and explosive sciences...thesis students) are drawn from engineering, es • Th s on: s 19. University of Idaho at Idaho Falls Loc o daho ems Engineering; Certificate in n

Handbook of Industrial Engineering Equations, Formulas, and Calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badiru, Adedeji B; Omitaomu, Olufemi A

The first handbook to focus exclusively on industrial engineering calculations with a correlation to applications, Handbook of Industrial Engineering Equations, Formulas, and Calculations contains a general collection of the mathematical equations often used in the practice of industrial engineering. Many books cover individual areas of engineering and some cover all areas, but none covers industrial engineering specifically, nor do they highlight topics such as project management, materials, and systems engineering from an integrated viewpoint. Written by acclaimed researchers and authors, this concise reference marries theory and practice, making it a versatile and flexible resource. Succinctly formatted for functionality, the bookmore » presents: Basic Math Calculations; Engineering Math Calculations; Production Engineering Calculations; Engineering Economics Calculations; Ergonomics Calculations; Facility Layout Calculations; Production Sequencing and Scheduling Calculations; Systems Engineering Calculations; Data Engineering Calculations; Project Engineering Calculations; and Simulation and Statistical Equations. It has been said that engineers make things while industrial engineers make things better. To make something better requires an understanding of its basic characteristics and the underlying equations and calculations that facilitate that understanding. To do this, however, you do not have to be computational experts; you just have to know where to get the computational resources that are needed. This book elucidates the underlying equations that facilitate the understanding required to improve design processes, continuously improving the answer to the age-old question: What is the best way to do a job?« less

Utilization of the Seniors Falls Investigation Methodology to Identify System-Wide Causes of Falls in Community-Dwelling Seniors

ERIC Educational Resources Information Center

Zecevic, Aleksandra A.; Salmoni, Alan W.; Lewko, John H.; Vandervoort, Anthoney A.; Speechley, Mark

2009-01-01

Purpose: As a highly heterogeneous group, seniors live in complex environments influenced by multiple physical and social structures that affect their safety. Until now, the major approach to falls research has been person centered. However, in industrial settings, the individuals involved in an accident are seen as the inheritors of system…

Lunar exploration for resource utilization

NASA Technical Reports Server (NTRS)

Duke, Michael B.

1992-01-01

The strategy for developing resources on the Moon depends on the stage of space industrialization. A case is made for first developing the resources needed to provide simple materials required in large quantities for space operations. Propellants, shielding, and structural materials fall into this category. As the enterprise grows, it will be feasible to develop additional sources - those more difficult to obtain or required in smaller quantities. Thus, the first materials processing on the Moon will probably take the abundant lunar regolith, extract from it major mineral or glass species, and do relatively simple chemical processing. We need to conduct a lunar remote sensing mission to determine the global distribution of features, geophysical properties, and composition of the Moon, information which will serve as the basis for detailed models of and engineering decisions about a lunar mine.

Analysis of construction accidents in Turkey and responsible parties.

PubMed

Gürcanli, G Emre; Müngen, Uğur

2013-01-01

Construction is one of the world's biggest industry that includes jobs as diverse as building, civil engineering, demolition, renovation, repair and maintenance. Construction workers are exposed to a wide variety of hazards. This study analyzes 1,117 expert witness reports which were submitted to criminal and labour courts. These reports are from all regions of the country and cover the period 1972-2008. Accidents were classified by the consequence of the incident, time and main causes of the accident, construction type, occupation of the victim, activity at time of the accident and party responsible for the accident. Falls (54.1%), struck by thrown/falling object (12.9%), structural collapses (9.9%) and electrocutions (7.5%) rank first four places. The accidents were most likely between the hours 15:00 and 17:00 (22.6%), 10:00-12:00 (18.7%) and just after the lunchtime (9.9%). Additionally, the most common accidents were further divided into sub-types. Expert-witness assessments were used to identify the parties at fault and what acts of negligence typically lead to accidents. Nearly two thirds of the faulty and negligent acts are carried out by the employers and employees are responsible for almost one third of all cases.

Constructing Relationships between Science and Practice in the Written Science Communication of the Washington State Wine Industry

ERIC Educational Resources Information Center

Szymanski, Erika Amethyst

2016-01-01

Even as deficit model science communication falls out of favor, few studies question how written science communication constructs relationships between science and industry. Here, I investigate how textual microprocesses relate scientific research to industry practice in the Washington State wine industry, helping (or hindering) winemakers and…

48 CFR 6.302-3 - Industrial mobilization; engineering, developmental, or research capability; or expert services.

Code of Federal Regulations, 2011 CFR

2011-10-01

...; engineering, developmental, or research capability; or expert services. 6.302-3 Section 6.302-3 Federal... Other Than Full and Open Competition 6.302-3 Industrial mobilization; engineering, developmental, or... achieve industrial mobilization, (ii) To establish or maintain an essential engineering, research, or...

48 CFR 6.302-3 - Industrial mobilization; engineering, developmental, or research capability; or expert services.

Code of Federal Regulations, 2010 CFR

2010-10-01

...; engineering, developmental, or research capability; or expert services. 6.302-3 Section 6.302-3 Federal... Other Than Full and Open Competition 6.302-3 Industrial mobilization; engineering, developmental, or... achieve industrial mobilization, (ii) To establish or maintain an essential engineering, research, or...

48 CFR 6.302-3 - Industrial mobilization; engineering, developmental, or research capability; or expert services.

Code of Federal Regulations, 2013 CFR

2013-10-01

...; engineering, developmental, or research capability; or expert services. 6.302-3 Section 6.302-3 Federal... Other Than Full and Open Competition 6.302-3 Industrial mobilization; engineering, developmental, or... achieve industrial mobilization, (ii) To establish or maintain an essential engineering, research, or...

48 CFR 6.302-3 - Industrial mobilization; engineering, developmental, or research capability; or expert services.

Code of Federal Regulations, 2014 CFR

2014-10-01

...; engineering, developmental, or research capability; or expert services. 6.302-3 Section 6.302-3 Federal... Other Than Full and Open Competition 6.302-3 Industrial mobilization; engineering, developmental, or... achieve industrial mobilization, (ii) To establish or maintain an essential engineering, research, or...

48 CFR 6.302-3 - Industrial mobilization; engineering, developmental, or research capability; or expert services.

Code of Federal Regulations, 2012 CFR

2012-10-01

...; engineering, developmental, or research capability; or expert services. 6.302-3 Section 6.302-3 Federal... Other Than Full and Open Competition 6.302-3 Industrial mobilization; engineering, developmental, or... achieve industrial mobilization, (ii) To establish or maintain an essential engineering, research, or...

46 CFR 11.530 - Endorsements as engineers of uninspected fishing industry vessels.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Endorsements as engineers of uninspected fishing... Engineer Officer Endorsements § 11.530 Endorsements as engineers of uninspected fishing industry vessels... propelled, which are documented to engage in the fishing industry, with the exception of— (1) Wooden ships...

Women: Support Factors and Persistence in Engineering. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Duncan, John R.; Zeng, Yong

2005-01-01

Limited information is available regarding the factors that promote persistence by women in engineering programs. Stated simply, the problem is that the number of women engineers continues to fall short in comparison to the gender ratio of women to men in the population in the U.S. (BEST, 2002) and worldwide (Hersh, 2000). More women engineers are…

[Improving industrial microbial stress resistance by metabolic engineering: a review].

PubMed

Fu, Ruiyan; Li, Yin

2010-09-01

Metabolic engineering is a technologic platform for industrial strain improvement and aims not only at modifying microbial metabolic fluxes, but also improving the physiological performance of industrial microbes. Microbes will meet multiple stresses in industrial processes. Consequently, elicited gene responses might result in a decrease in overall cell fitness and the efficiency of biotransformation. Thus, it is crucial to develop robust and productive microbial strains that can be integrated into industrial-scale bioprocesses. In this review, we focus on the progress of these novel methods and strategies for engineering stress-tolerance phenotypes referring to rational metabolic engineering and inverse metabolic engineering in recent years. In addition, we also address problems existing in this area and future research needs of microbial physiological functionality engineering.

Fall hazard control observed on residential construction sites.

PubMed

Kaskutas, Vicki; Dale, Ann Marie; Nolan, James; Patterson, Dennis; Lipscomb, Hester J; Evanoff, Bradley

2009-06-01

Falls are a leading cause of mortality and morbidity in the construction industry. This study measured fall hazards at residential construction sites. Trained carpenters administered the St. Louis Audit of Fall Risks and interviewed carpenters. The prevalence of fall prevention practices meeting safety criteria was counted and correlations explored. We identified a high prevalence of fall hazards at the 197 residential sites audited. Roof sheathing met safety criteria most consistently (81%) and truss setting least consistently (28%). Use of personal fall arrest and monitoring of unguarded floor openings were rare. Safer performance on several scales was correlated. Construction sites of large-sized contractors were generally safer than smaller contractors. Apprentice carpenters were less familiar with their employers' fall prevention plan than experienced workers. Safety could be improved with consistent use of recognized fall prevention practices at residential construction sites.

A future for models?

NASA Astrophysics Data System (ADS)

Posey, C. J.

During times when overshot and undershot water wheels provided power for turning millstones, much depended upon the miller's judgment. “A big order is coming in tomorrow. Better shut down this afternoon. The trash rack needs to be cleaned and the flash boards raised.” Common sense could solve most of the problems in those days. It had to, if business was to continue.As the industrial revolution progressed, generation of electricity became a possibility. Higher rotational speeds than could be obtained by belts, pulleys, or gears were needed. Ingenious though the miller might have been, he had to depend on engineers who understood electricity and high-velocity flow to mate water wheels to dynamos. Enough engineers did, and by making tests of a variety of designs, often with small-scale runners, were able to guarantee the efficiency of hydroelectric generators suitable for a variety of sites. The miller was thus relieved of the “high-tech” decision. Now all important decisions fall to his successors, the utility companies, with assistance(?) from the State Utilities Boards and the National Securities and Exchange Commission.

Biocatalysts: application and engineering for industrial purposes.

PubMed

Jemli, Sonia; Ayadi-Zouari, Dorra; Hlima, Hajer Ben; Bejar, Samir

2016-01-01

Enzymes are widely applied in various industrial applications and processes, including the food and beverage, animal feed, textile, detergent and medical industries. Enzymes screened from natural origins are often engineered before entering the market place because their native forms do not meet the requirements for industrial application. Protein engineering is concerned with the design and construction of novel enzymes with tailored functional properties, including stability, catalytic activity, reaction product inhibition and substrate specificity. Two broad approaches have been used for enzyme engineering, namely, rational design and directed evolution. The powerful and revolutionary techniques so far developed for protein engineering provide excellent opportunities for the design of industrial enzymes with specific properties and production of high-value products at lower production costs. The present review seeks to highlight the major fields of enzyme application and to provide an updated overview on previous protein engineering studies wherein natural enzymes were modified to meet the operational conditions required for industrial application.

Research and Exploration for Operational Research Education in Industry and Engineering Subject

ERIC Educational Resources Information Center

Wu, Yu-hua; Wang, Feng-ming; Du, Gang

2007-01-01

On the basic of exploring the relationship of industry engineering and operational research technique, the thesis analyzes the location and utility of the operational research education in the whole industry engineering subject education. It brings forward the system design about operational research and relative class among industry engineering…

Nanotechnology patents in the automotive industry (a quantitative & qualitative analysis).

PubMed

Prasad, Raghavendra; Bandyopadhyay, Tapas K

2014-01-01

The aim of the article is to present a trend in patent filings for application of nanotechnology to the automobile sector across the world, using the keyword-based patent search. Overviews of the patents related to nano technology in the automobile industry have been provided. The current work has started from the worldwide patent search to find the patents on nanotechnology in the automobile industry and classify the patents according to the various parts of an automobile to which they are related and the solutions which they are providing. In the next step various graphs have been produced to get an insight into various trends. In next step, analysis of patents in various classifications, have been performed. The trends shown in graphs provide the quantitative analysis whereas; the qualitative analysis has been done in another section. The classifications of patents based on the solution they provide have been performed by reading the claims, titles, abstract and full texts separately. Patentability of nano technology inventions have been discussed in a view to give an idea of requirements and statutory bars to the patentability of nanotechnology inventions. Another objective of the current work is to suggest appropriate framework for the companies regarding use of nano technology in the automobile industry and a suggestive strategy for patenting of the inventions related to the same. For example, US Patent, with patent number US2008-019426A1 discusses the invention related to Lubricant composition. This patent has been studied and classified to fall under classification of automobile parts. After studying this patent, it is deduced that, the problem of friction in engine is being solved by this patent. One classification is the "automobile part" based while other is the basis of "problem being solved". Hence, two classifications, namely reduction in friction and engine were created. Similarly, after studying all the patents, a similar matrix has been created.

Fatal Falls Overboard in Commercial Fishing - United States, 2000-2016.

PubMed

Case, Samantha L; Lincoln, Jennifer M; Lucas, Devin L

2018-04-27

Commercial fishing is one of the most dangerous jobs in the United States, with a 2016 work-related fatality rate (86.0 deaths per 100,000 full-time equivalent workers) 23 times higher than that for all U.S. workers (3.6) (1). Sinking vessels cause the most fatalities in the industry; however, falling from a fishing vessel is a serious hazard responsible for the second highest number of commercial fishing-associated fatalities (2,3). CDC's National Institute for Occupational Safety and Health (NIOSH) analyzed data on unintentional fatal falls overboard in the U.S. commercial fishing industry to identify gaps in the use of primary, secondary, and tertiary prevention strategies. During 2000-2016, a total of 204 commercial fishermen died after unintentionally falling overboard. The majority of falls (121; 59.3%) were not witnessed, and 108 (89.3%) of these victims were not found. Among 83 witnessed falls overboard, 56 rescue attempts were made; 22 victims were recovered but were not successfully resuscitated. The circumstances, rescue attempts, and limited use of lifesaving and recovery equipment indicate that efforts to reduce these preventable fatalities are needed during pre-event, event, and post-event sequences of falls overboard. Vessel owners could consider strategies to prevent future fatalities, including lifeline tethers, line management, personal flotation devices (PFDs), man-overboard alarms, recovery devices, and rescue training.

Tablet PCs in Engineering Mathematics Courses at the J.B. Speed School of Engineering

ERIC Educational Resources Information Center

Hieb, Jeffrey L.; Ralston, Patricia A. S.

2010-01-01

In fall 2007, J.B. Speed School of Engineering at the University of Louisville joined the ranks of universities requiring the purchase of Tablet PCs for all new entering students. This article presents a description of how the Department of Engineering Fundamentals incorporated Tablet PCs into their instruction, a review of the literature…

Educational Innovation in the Design of an Online Nuclear Engineering Curriculum

ERIC Educational Resources Information Center

Hall, Simin; Jones, Brett D.; Amelink, Catherine; Hu, Deyu

2013-01-01

The purpose of this paper is to describe the development and implementation phases of online graduate nuclear engineering courses that are part of the Graduate Nuclear Engineering Certificate program at Virginia Tech. Virginia Tech restarted its nuclear engineering program in the Fall of 2007 with 60 students, and by 2009, the enrollment had grown…

The Rise and Fall of Industrial Agriculture

ERIC Educational Resources Information Center

Geno, Larry M.

1976-01-01

This article analyzes the evolution of industrial agriculture in Canada. Population pressures and technology caused the development of industrial agriculture. Although total crop yields have increased, energy efficiency and nutritional quality have decreased. Also intensive agriculture has degraded the soil and lowered air and water qualities. (MR)

A national profile of the U.S. hardwood sawmill industry

Treesearch

Scott Bowe; Robert Smith; Philip A. Araman

2001-01-01

A nationwide survey of the hardwood sawmill industry was conducted in the fall of 1999. The objectives of the survey were to generate a current demographic profile of the hardwood sawmill industry and identify the preferred information sources for the hardwood sawmill industry. These objectives were chosen because timely information was not available for the hardwood...

Perspective on thermal barrier coatings for industrial gas turbine applications

NASA Technical Reports Server (NTRS)

Mutasim, Zaher; Brentnall, William

1995-01-01

Thermal barrier coatings (TBC's) have been used in high thrust aircraft engines for many years, and have proved to be very effective in providing thermal protection and increasing engine efficiencies. TBC life requirements for aircraft engines are typically less than those required for industrial gas turbines. This paper describes current and future applications of TBC's in industrial gas turbine engines. Early testing and applications of TBC's is reviewed. Areas of concern from the engine designer's and materials engineer's perspective are identified and evaluated. This paper focuses on the key factors that are expected to influence utilization of TBC's in advanced industrial gas turbine engines. It is anticipated that reliable, durable and highly effective coating systems will be produced that will ultimately improve engine efficiency and performance.

Enhancing Small-Business Opportunities in the DoD

DTIC Science & Technology

2008-01-01

to the DoD is below the small-business share of all industry sales. In some industries , including aircraft manufacturing and engineer - ing services...for goods not included in the Aircraft Manufacturing category as well as those not in another industry category for aircraft engine and engine parts...Purchases, % Small-Business Share of Industry , %, 20022007 2002 Aircraft Manufacturing 2.3 1.8 8.7 Engineering Services 13.6 16.9 20.3 R&D in the

OXIDATIVE TREATMENT OF INDUSTRIAL WASTEWATER

EPA Science Inventory

This paper defines industrial waste treatment process as falling into categories of oxidative destruction, reductive destruction, and non-destructive, separation operations. The various oxidative approaches, including biological, chemical and thermal methods, are then discussed i...

Industrial Education. "Small Engines".

ERIC Educational Resources Information Center

Parma City School District, OH.

Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

75 FR 53846 - Airworthiness Directives; Thielert Aircraft Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-02

... Engines Installed In, But Not Limited To, Diamond Aircraft Industries Model DA 42 Airplanes; Correction..., Diamond Aircraft Industries model DA 42 airplanes. The part number for engine model TAE 125-01 is missing...-99 reciprocating engines, installed in, but not limited to, Diamond Aircraft Industries model DA 42...

Bridges with Trigonometry Equals Engineering Achievement

ERIC Educational Resources Information Center

Gathing, Ahmed L.

2011-01-01

Exemplary and fun technology education classes in high schools are always welcome. The author introduces bridge building to his ninth graders and other students who comprise the Introduction to Engineering and Technology course within the first two months of the fall semester. In Georgia, Introduction to Engineering and Technology is the first of…

Molecular engineering of industrial enzymes: recent advances and future prospects.

PubMed

Yang, Haiquan; Li, Jianghua; Shin, Hyun-Dong; Du, Guocheng; Liu, Long; Chen, Jian

2014-01-01

Many enzymes are efficiently produced by microbes. However, the use of natural enzymes as biocatalysts has limitations such as low catalytic efficiency, low activity, and low stability, especially under industrial conditions. Many protein engineering technologies have been developed to modify natural enzymes and eliminate these limitations. Commonly used protein engineering strategies include directed evolution, site-directed mutagenesis, truncation, and terminal fusion. This review summarizes recent advances in the molecular engineering of industrial enzymes and discusses future prospects in this field. We expect this review to increase interest in and advance the molecular engineering of industrial enzymes.

The role of gender on academic performance in STEM-related disciplines: Data from a tertiary institution.

PubMed

John, Temitope M; Badejo, Joke A; Popoola, Segun I; Omole, David O; Odukoya, Jonathan A; Ajayi, Priscilla O; Aboyade, Mary; Atayero, Aderemi A

2018-06-01

This data article presents data of academic performances of undergraduate students in Science, Technology, Engineering and Mathematics (STEM) disciplines in Covenant University, Nigeria. The data shows academic performances of Male and Female students who graduated from 2010 to 2014. The total population of samples in the observation is 3046 undergraduates mined from Biochemistry (BCH), Building technology (BLD), Computer Engineering (CEN), Chemical Engineering (CHE), Industrial Chemistry (CHM), Computer Science (CIS), Civil Engineering (CVE), Electrical and Electronics Engineering (EEE), Information and Communication Engineering (ICE), Mathematics (MAT), Microbiology (MCB), Mechanical Engineering (MCE), Management and Information System (MIS), Petroleum Engineering (PET), Industrial Physics-Electronics and IT Applications (PHYE), Industrial Physics-Applied Geophysics (PHYG) and Industrial Physics-Renewable Energy (PHYR). The detailed dataset is made available in form of a Microsoft Excel spreadsheet in the supplementary material of this article.

Renovation of a Mechanical Engineering Senior Design Class to an Industry-Tied and Team-Oriented Course

ERIC Educational Resources Information Center

Liu, Yucheng

2017-01-01

In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became…

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... engineering services; industrial-type maintenance, installation, alteration, and training services; legal... services; (17) Financial services (purchases only); (18) Industrial engineering services; (19) Industrial...; educational and training services; engineering, architectural, and surveying services; financial services...

Job Prospects for Computer Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1988-01-01

Discusses the computer engineering industry in the United States. Recounts recent shifts in the computer industry and notes that despite foreign competition, the industry offers graduating computer engineers ample opportunities for employment. Claims that skill and technical knowledge are the most important assets for getting a job. (TW)

Engineering Technology Education: Bibliography 1989.

ERIC Educational Resources Information Center

Dyrud, Marilyn A., Comp.

1990-01-01

Over 200 references divided into 24 different areas are presented. Topics include administration, aeronautics, architecture, biomedical technology, CAD/CAM, civil engineering, computers, curriculum, electrical/electronics engineering, industrial engineering, industry and employment, instructional technology, laboratories, lasers, liberal studies,…

Computers in manufacturing

NASA Astrophysics Data System (ADS)

Hudson, C. A.

1982-02-01

CAD/CAM advances and applications for enhancing productivity in industry are explored. Wide-spread use of CAD/CAM devices are projected to occur by the time period 1992-1997, resulting in a higher percentage of technicians in the manufacturing process, while the cost of computers and software will continue to fall and become more widely available. Computer aided design is becoming a commercially viable system for design and geometric modeling, engineering analysis, kinematics, and drafting, and efforts to bridge the gap between CAD and CAM are indicated, with particular attention given to layering, wherein individual monitoring of different parts of the manufacturing process can be effected without crossover of unnecessary information. The potentials and barriers to the use of robotics are described, with the added optimism that displaced workers to date have moved up to jobs of higher skill and interest.

Job Prospects for Industrial Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1986-01-01

Because of the impetus on how to improve productivity in companies, the demand for graduating industrial engineers continues to be strong from a variety of sources. Starting salary offers for graduates have been averaging $26,784. Enrollments in industrial engineering programs are increasing (with 3,923 graduates in 1984). (JN)

Manufacturing Methods and Technology Program Plan. Update.

DTIC Science & Technology

1981-11-01

INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND. ILLINOIS 61299 82 INDEX PAGE I. INTRODUCTION The MMT Program Plan Update ........... 1 Industry Guide...obtained from that Plan, extra copies of which are available upon request from the Industrial Base Engineering Activity. Other sources for this data are...Major Subcommands (SUBMACOM’S). The SUBMACOM’S plan, formulate, budget, and execute individual projects. The Industrial Base Engineering Activity

10. AERIAL VIEW LOOKING SOUTH SOUTHEAST SHOWING (from left) INDUSTRY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. AERIAL VIEW LOOKING SOUTH SOUTHEAST SHOWING (from left) INDUSTRY MILL, HARMONY MILL, PHOENIX MILL, CONGDON MILL, TODD RAFFERTY MACHINE CO. - Great Falls S. U. M. Historic District, Oliver Street, Paterson, Passaic County, NJ

Soil - A necessary resource for our future

USDA-ARS?s Scientific Manuscript database

Fertile or degraded soils have been the basis of the rise or fall of civilizations throughout history. They have been the engine that powered the rise of many countries including our own and the fall of those who were not good stewards of their environment or suffered insurmountable setbacks, such a...

Hazardous Waste Cleanup: CECOS International Incorporated in Niagara Falls, New York

EPA Pesticide Factsheets

CECOS International, Inc. is located on a 385-acre tract in an industrial-commercial area of Niagara County. The majority of the site is in the town of Niagara; however, a portion of the site is in Niagara Falls. The facility contains a variety of waste op

Soil temperature regulates nitrogen loss from lysimeters following fall and winter manure application

USDA-ARS?s Scientific Manuscript database

Many producers practice fall and winter manure spreading for economic and practical reasons. In order to minimize the risk of nitrogen loss between application and crop uptake in the spring, university extension publications and industry professionals often make recommendations based on soil tempera...

Training Engineers of Joint Programs for the European Aerospace Industry.

ERIC Educational Resources Information Center

Thomas, Jurgen

1985-01-01

Examines topics and issues related to training engineers of joint programs for the European aerospace industry. Forms of cooperation, European educational systems, and skills needed to successfully work as an engineer in a joint program for the European aircraft industry are the major areas addressed. (JN)

An Industrial Engineering Approach to Cost Containment of Pharmacy Education.

PubMed

Duncan, Wendy; Bottenberg, Michelle; Chase, Marilea; Chesnut, Renae; Clarke, Cheryl; Schott, Kathryn; Torry, Ronald; Welty, Tim

2015-11-25

A 2-semester project explored employing teams of fourth-year industrial engineering students to optimize some of our academic management processes. Results included significant cost savings and increases in efficiency, effectiveness, and student and faculty satisfaction. While we did not adopt all of the students' recommendations, we did learn some important lessons. For example, an initial investment of time in developing a mutually clear understanding of the problems, constraints, and goals maximizes the value of industrial engineering analysis and recommendations. Overall, industrial engineering was a valuable tool for optimizing certain academic management processes.

Perspective on thermal barrier coatings for industrial gas turbine applications

NASA Technical Reports Server (NTRS)

Mutasim, Z. Z.; Hsu, L. L.; Brentnall, W. D.

1995-01-01

Thermal Barrier Coatings (TBC's) have been used in high thrust aircraft engines for many years, and have proved to be very effective in allowing higher turbine inlet temperatures. TBC life requirements for aircraft engines are typically less than those required in industrial gas turbines. The use of TBC's for industrial gas turbines can increase if durability and longer service life can be successfully demonstrated. This paper will describe current and future applications of TBC's in industrial gas turbine engines. Early testing and applications of TBC's will also be reviewed. This paper focuses on the key factors that are expected to influence utilization of TBC's in advanced industrial gas turbine engines. It is anticipated that reliable, durable and high effective coating systems will be produced that will ultimately improve engine efficiency and performance.

The political economy of trade liberalization and environmental policy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fredriksson, P.G.

1999-01-01

A pressure group model where environmental and industry lobby groups offer political support in return for favorable pollution tax policies is used to explain and predict the equilibrium pollution tax in sectors protected by tariffs. The political economy effects of trade liberalization are investigated. The pollution tax is shown to decrease if the lobbying effort by the environmental lobby decreases more rapidly than by the industry lobby Ceteris paribus. The level of political conflict falls with trade liberalization. Pollution may increase because of a reduction of the pollution tax, and tax revenues may fall simultaneously as pollution increases.

Chemical Engineering in Education and Industry.

ERIC Educational Resources Information Center

Wei, James

1986-01-01

Provides an historical overview of the origins, developments, and contributions of chemical engineering. Reviews the roles of the university and industry in the education of chemical engineers. Includes a listing of the major advances of chemical engineering since World War II. (ML)

The Future for Industrial Engineers: Education and Research Opportunities

ERIC Educational Resources Information Center

Mummolo, Giovanni

2007-01-01

EU graduation and the recruitment of industrial engineers (IEs) have been investigated. An increasing demand is observed for graduates in almost all industrial engineering (IE) subjects. The labour market in the EU is evolving towards the service sector even if manufacturing still represents a significant share of both IE employment and gross…

Enhancing the Undergraduate Industrial Engineering Curriculum: Defining Desired Characteristics and Emerging Topics

ERIC Educational Resources Information Center

Eskandari, Hamidreza; Sala-Diakanda, Serge; Furterer, Sandra; Rabelo, Luis; Crumpton-Young, Lesia; Williams, Kent

2007-01-01

Purpose: This paper aims to present the results of an initial research study conducted to identify the desired professional characteristics of an industrial engineer with an undergraduate degree and the emerging topic areas that should be incorporated into the curriculum to prepare industrial engineering (IE) graduates for the future workforce.…

Genetic engineering of industrial strains of Saccharomyces cerevisiae.

PubMed

Le Borgne, Sylvie

2012-01-01

Genetic engineering has been successfully applied to Saccharomyces cerevisiae laboratory strains for different purposes: extension of substrate range, improvement of productivity and yield, elimination of by-products, improvement of process performance and cellular properties, and extension of product range. The potential of genetically engineered yeasts for the massive production of biofuels as bioethanol and other nonfuel products from renewable resources as lignocellulosic biomass hydrolysates has been recognized. For such applications, robust industrial strains of S. cerevisiae have to be used. Here, some relevant genetic and genomic characteristics of industrial strains are discussed in relation to the problematic of the genetic engineering of such strains. General molecular tools applicable to the manipulation of S. cerevisiae industrial strains are presented and examples of genetically engineered industrial strains developed for the production of bioethanol from lignocellulosic biomass are given.

Analysis of Construction Accidents in Turkey and Responsible Parties

PubMed Central

GÜRCANLI, G. Emre; MÜNGEN, Uğur

2013-01-01

Construction is one of the world’s biggest industry that includes jobs as diverse as building, civil engineering, demolition, renovation, repair and maintenance. Construction workers are exposed to a wide variety of hazards. This study analyzes 1,117 expert witness reports which were submitted to criminal and labour courts. These reports are from all regions of the country and cover the period 1972–2008. Accidents were classified by the consequence of the incident, time and main causes of the accident, construction type, occupation of the victim, activity at time of the accident and party responsible for the accident. Falls (54.1%), struck by thrown/falling object (12.9%), structural collapses (9.9%) and electrocutions (7.5%) rank first four places. The accidents were most likely between the hours 15:00 and 17:00 (22.6%), 10:00–12:00 (18.7%) and just after the lunchtime (9.9%). Additionally, the most common accidents were further divided into sub-types. Expert-witness assessments were used to identify the parties at fault and what acts of negligence typically lead to accidents. Nearly two thirds of the faulty and negligent acts are carried out by the employers and employees are responsible for almost one third of all cases. PMID:24077446

A Multidisciplinary Engineering Summer School in an Industrial Setting

ERIC Educational Resources Information Center

Larsen, Peter Gorm; Fernandes, Joao M.; Habel, Jacek; Lehrskov, Hanne; Vos, Richard J. C.; Wallington, Oliver; Zidek, Jan

2009-01-01

Most university-level engineering studies produce technically skilled engineers. However, typically students face several difficulties when working in multidisciplinary teams when they initiate their industrial careers. In a globalised world, it becomes increasingly important that engineers are capable of collaborating across disciplinary…

An Industrial Engineering Approach to Cost Containment of Pharmacy Education

PubMed Central

Bottenberg, Michelle; Chase, Marilea; Chesnut, Renae; Clarke, Cheryl; Schott, Kathryn; Torry, Ronald; Welty, Tim

2015-01-01

A 2-semester project explored employing teams of fourth-year industrial engineering students to optimize some of our academic management processes. Results included significant cost savings and increases in efficiency, effectiveness, and student and faculty satisfaction. While we did not adopt all of the students’ recommendations, we did learn some important lessons. For example, an initial investment of time in developing a mutually clear understanding of the problems, constraints, and goals maximizes the value of industrial engineering analysis and recommendations. Overall, industrial engineering was a valuable tool for optimizing certain academic management processes. PMID:26839421

Developing a New Industrial Engineering Curriculum Using a Systems Engineering Approach

ERIC Educational Resources Information Center

Buyurgan, Nebil; Kiassat, Corey

2017-01-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have…

Myths and Motives behind STEM (Science, Technology, Engineering, and Mathematics) Education and the STEM-Worker Shortage Narrartive

ERIC Educational Resources Information Center

Stevenson, Heidi J.

2014-01-01

The Business Roundtable (2013) website presents a common narrative in regard to STEM (Science, Technology, Engineering and Mathematics) education, "American students are falling behind in math and science. Fewer and fewer students are pursuing careers in science, technology, engineering and mathematics, and American students are performing at…

A Guideline of Using Case Method in Software Engineering Courses

ERIC Educational Resources Information Center

Zainal, Dzulaiha Aryanee Putri; Razali, Rozilawati; Shukur, Zarina

2014-01-01

Software Engineering (SE) education has been reported to fall short in producing high quality software engineers. In seeking alternative solutions, Case Method (CM) is regarded as having potential to solve the issue. CM is a teaching and learning (T&L) method that has been found to be effective in Social Science education. In principle,…

48 CFR 1228.306-70 - Contracts for lease of aircraft.

Code of Federal Regulations, 2012 CFR

2012-10-01

... control of the lessor and the damage occurs because of the aircraft engine, propeller or the flight of, or an object falling from the aircraft, engine or propeller. [70 FR 6507, Feb. 7, 2005, as amended at 70...

The Sandalwood industry in Australia: a history

Treesearch

Pamela Statham

1990-01-01

From its inception in 1805, when it contributed to Sydney merchant incomes from whaling ventures, until today, when it earns several million dollars in export revenue, the sandalwood industry has played a small but significant part in Australia's economic development. The history of the industry falls into three major stages: first is the off-shore exploitation of...

Hazardous Waste Cleanup: Ciba Geigy – Hercules Plant in Queensbury (Glen Falls), New York

EPA Pesticide Factsheets

The approximately 45-acre Main Plant site is located in the Town of Queensbury, just east of the City of Glens Falls in Warren County, New York. The site is in a mixed industrial/residential area on the northern bank of an easterly flowing segment of the

Proceedings of the Annual Tri-Service Meeting for Aircraft Engine Monitoring and Diagnostics (7th) Held on 5-7 December 1978, at Arnold Engineering Development Center, Arnold AFS, Tennessee

DTIC Science & Technology

1979-07-01

Annual Tri-Service meeting on Aircraft Engine Monitoring and Diagnostics held last fall. 2. For all turbojet and turbofan engines , low cycle fatigue...7 December 1978. Each presentation contains an over-, view of the results and conclusions of the aircraft turbine engine diagnostic efforts that have... AIRCRAFT ENGINE 2-41 MONITORING AND DIAGNOSTIC MEETING T-38 EHMS UPDATE 2-43 A-10 TURBINE ENGINE EVALUATION (TEMS) 2-47 USAF TERMINOLOGY FOR SCORING

A Resident Engineer.

ERIC Educational Resources Information Center

Chapman, Gary T.

This paper examines the work of resident engineers in a university setting. The need for engineers with industrial experience is established, and the benefits of using resident engineers in training programs are cited. Attributes and problems associated with the practice are studied from the viewpoints of industry, government, universities, and…

Competences of Engineers in the Iron and Steel Industry

NASA Astrophysics Data System (ADS)

Kozhevnikov, A. V.

2017-12-01

The article presents the results of assessment of the professional performance of engineers working in the iron and steel industry. A competence-based profile of highly-qualified professionals has been built. The study of the competences of the iron and steel industry engineers has shown that their knowledge and skills may be mobilized to solve professional tasks.

An Empirical Study of Industrial Engineering and Management Curriculum Reform in Fostering Students' Creativity

ERIC Educational Resources Information Center

Chen, Chi-Kuang; Jiang, Bernard C.; Hsu, Kuang-Yiao

2005-01-01

The objective of this paper is to examine the effectiveness of a creativity-fostering program in industrial engineering and management (IE&M) curriculum reform. Fostering creativity in students has become a crucial issue in industrial engineering education. In a survey of previous studies, we found few on IE&M curriculum reform. In…

Fatal falls in the US construction industry, 1990 to 1999.

PubMed

Derr, J; Forst, L; Chen, H Y; Conroy, L

2001-10-01

The Occupational Safety and Health Administration's (OSHA's) Integrated Management Information System (IMIS) database allows for the detailed analysis of risk factors surrounding fatal occupational events. This study used IMIS data to (1) perform a risk factor analysis of fatal construction falls, and (2) assess the impact of the February 1995 29 CFR Part 1926 Subpart M OSHA fall protection regulations for construction by calculating trends in fatal fall rates. In addition, IMIS data on fatal construction falls were compared with data from other occupational fatality surveillance systems. For falls in construction, the study identified several demographic factors that may indicate increased risk. A statistically significant downward trend in fatal falls was evident in all construction and within several construction categories during the decade. Although the study failed to show a statistically significant intervention effect from the new OSHA regulations, it may have lacked the power to do so.

Measurement of the effect of playground surface materials on hand impact forces during upper limb fall arrests.

PubMed

Choi, Woochol J; Kaur, Harjinder; Robinovitch, Stephen N

2014-04-01

Distal radius fractures are common on playgrounds. Yet current guidelines for the selection of playground surface materials are based only on protection against fall-related head injuries. We conducted "torso release" experiments to determine how common playground surface materials affect impact force applied to the hand during upper limb fall arrests. Trials were acquired for falls onto a rigid surface, and onto five common playground surface materials: engineered wood fiber, gravel, mulch, rubber tile, and sand. Measures were acquired for arm angles of 20 and 40 degrees from the vertical. Playground surface materials influenced the peak resultant and vertical force (P<.001), but not the peak horizontal force (P=.159). When compared with the rigid condition, peak resultant force was reduced 17% by sand (from 1039 to 864 N), 16% by gravel, 7% by mulch, 5% by engineered wood fiber, and 2% by rubber tile. The best performing surface provided only a 17% reduction in peak resultant force. These results help to explain the lack of convincing evidence from clinical studies on the effectiveness of playground surface materials in preventing distal radius fractures during playground falls, and highlight the need to develop playground surface materials that provide improved protection against these injuries.

Collaboration between Industrial Designers and Design Engineers - Comparing the Understanding of Design Intent.

PubMed

Laursen, Esben Skov; Møller, Louise

2015-01-01

This paper describes a case study comparing the understanding of design intent between industrial designers and design engineers. The study is based on the hypothesis that it is not all aspects of the design intent that are equally difficult to share between industrial designers and design engineers in the product development process. The study builds on five semi-structured interviews, where two industrial designers and three design engineers were interviewed about different aspects of the design intent. Based on our results, there seem to be indications that the more complex and abstract elements of industrial design knowledge such as the meaning, semantics, values, emotions and social aspects of the product are less shared by the design engineers. Moreover, the results also indicate that the different aspects of the design intent are perceived separately, rather than as part of a whole by the design engineers. The connection between the different aspects of the design intent is not shared between the industrial designer and design engineer making the shared knowledge less meaningful to the design engineers. The results of this study cannot be claimed to be conclusive due to the limited empirical material. Further investigation and analytically richer data are required in order to verify and broaden the findings. More case studies have therefore been planned in order to understand the area better.

Ceramic Technology For Advanced Heat Engines Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-01

Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. The objective of the project is to develop the industrial technology base required for reliable ceramicsmore » for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. This advanced materials technology is being developed in parallel and close coordination with the ongoing DOE and industry proof of concept engine development programs. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. Abstracts prepared for appropriate papers.« less

[Progress in industrial bioprocess engineering in China].

PubMed

Zhuang, Yingping; Chen, Hongzhang; Xia, Jianye; Tang, Wenjun; Zhao, Zhimin

2015-06-01

The advances of industrial biotechnology highly depend on the development of industrial bioprocess researches. In China, we are facing several challenges because of a huge national industrial fermentation capacity. The industrial bioprocess development experienced several main stages. This work mainly reviews the development of the industrial bioprocess in China during the past 30 or 40 years: including the early stage kinetics model study derived from classical chemical engineering, researching method based on control theory, multiple-parameter analysis techniques of on-line measuring instruments and techniques, and multi-scale analysis theory, and also solid state fermentation techniques and fermenters. In addition, the cutting edge of bioprocess engineering was also addressed.

Development of university-industry partnerships in railroad engineering education

NASA Astrophysics Data System (ADS)

Lautala, Pasi T.

Rail transportation has been an important part of the North American transportation network since the 19th century and it continues to be a major contributor to the economic well-being and the global competitiveness of the U.S. The recent expansion in freight rail volumes and forecasts for continuous growth, together with more favorable attitudes for urban passenger rail present several challenges for the rail industry. One of the challenges is the availability of a well educated engineering workforce. The rail industry has recognized a need to attract new railroad professionals from various disciplines for management and technical positions, but most universities eliminated railroad engineering from their curricula after the recruitment levels faded several decades ago. Today, railroad expertise and related engineering courses exist at only a few universities and most students graduate without any exposure to rail topics. While industry representatives have expressed their concern about a future workforce, little data is available on the extent of the demand, on the characteristics and skills of preferred candidates, and on the role that universities can play. A benchmarking study was undertaken to investigate the demand for university engineering graduates and assess whether current methods are sufficient to attract, educate, recruit, train and retain engineering students in the railroad profession. Data was collected from industry human resources and training managers to define the quantitative and qualitative needs for railroad engineers. In addition, recently hired engineers working in the rail industry were surveyed to determine the extent of their university exposure in rail topics and how it affected their career choice. The surveys indicated an increase of over 300 percent in the annual recruitment for railroad engineers by the participating companies between 2002 and 2005. Recruitment levels are expected to remain high for the next five to ten years due to high demand for rail transportation and an older engineering workforce with the greatest demand for civil, electrical and mechanical engineers with bachelor's degrees. The rail industry and universities have grown apart over the past several decades, as rail programs and courses were abandoned at universities and there were very limited recruitment and research activities by the railroads at universities. Today, specialized course(s) in rail topics are offered at approximately three percent of ABET accredited civil engineering programs in the U.S. and only 16 percent of engineers who responded to the survey had received university exposure to rail topics. The research findings suggest that increased university participation has the potential to assist the rail industry in all aspects related to attracting, educating, recruiting, training and retaining engineering graduates. The primary advantages would be greater industry visibility and student knowledge in rail topics. Increased prior knowledge, on the other hand, improves the effectiveness of industry training programs and offers a potential for sizable training cost reductions. As a final conclusion, the research suggests that the most effective approach for developing future railroad engineers is a balancing act where the responsibilities should be shared by the rail industry and universities based on each others strengths. University participation should include multiple types and levels, including introductory lectures, co-op/internship programs, courses in railroad engineering, and a minor or certificate in railroad engineering that would include several courses. Due to the urgent demand for railroad engineers and time it takes to rebuild the expertise on campuses, the development process should begin immediately, be incremental, and utilize concepts, such as cooperation with other universities or engineer-in-residence, that reduce the demand of internal university resources. The challenges to the process, such as willingness of partners to understand each others needs and motivations for the relationship should be alleviated by developing performance goals and measures of success. While it is impossible to evaluate all aspects of university level railroad engineering education in one study, this research suggests that there are opportunities for a partnership between the rail industry and universities. The purpose of this research was to identify those opportunities and increase the understanding of the forces that shape the demand for railroad engineers and engineering education. The findings can be used both by the rail industry and the universities as they initiate change in the current processes and thrive to develop railroad engineers to meet the demands of the 21 st century.

Review and Prospect of BIM Policy in China

NASA Astrophysics Data System (ADS)

Liu, Bingsheng; Wang, Min; Zhang, Yutao; Liu, Rui; Wang, Anmin

2017-10-01

In the process of architectural design, construction, operation and maintenance, the problem of inefficiency and inaccuracy in information application and exchange has caused substantial waste of resources and risk in construction industry. Building Information Management provides an opportunity to address the issue. Building information modelling (BIM) has been increasingly applied in design, construction and other information management in China as its important role in reducing engineering changes, improving engineering quality, shortening project duration, saving project cost, enhancing information sharing among the participants many others. As an integration of process and product, its development and implementation need government regulation to enhance its applications effect and standardize its adoption and implementation. Especially, the government guidance affects the application and development of new technology to a great extent in China. However, relevant policy development falls behind the rapid development of its application in practice in China, which has led to many problems in construction practice. In order to develop effective BIM policy for China, this paper conducted a comprehensive review about existing BIM policy in China by analysing its status and problems, comparing it with the corresponding policy in developed countries such as the USA and UK. The expected policy development direction is also discussed and proposed.

Computer Education for Engineers, Part III.

ERIC Educational Resources Information Center

McCullough, Earl S.; Lofy, Frank J.

1989-01-01

Reports the results of the third survey of computer use in engineering education conducted in the fall of 1987 in comparing with 1981 and 1984 results. Summarizes survey data on computer course credits, languages, equipment use, CAD/CAM instruction, faculty access, and computer graphics. (YP)

Engineering Graduates' Skill Sets in the MENA Region: A Gap Analysis of Industry Expectations and Satisfaction

ERIC Educational Resources Information Center

Ramadi, Eric; Ramadi, Serge; Nasr, Karim

2016-01-01

This study explored gaps between industry expectations and perceptions of engineering graduates' skill sets in the Middle East and North Africa (MENA) region. This study measured the importance that managers of engineers placed on 36 skills relevant to engineers. Also measured was managers' satisfaction with engineering graduates' skill sets.…

Roofing research and standards development: Fourth volume. ASTM special technical publication 1349

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wallace, T.J.; Rossiter, W.J. Jr.

1999-07-01

As the roofing industry has stabilized, a broad variety of roof systems have found general acceptance by the building owners, architects, engineers, contractors, and others who select and install roofs. These roof systems include those based on conventional built-up membranes using glass and synthetic reinforcements, synthetic polymeric membranes using elastomers and thermoplastics, polymer-modified membranes, and sprayed polyurethane foam. ASTM Committee D8 on Roofing, Waterproofing, and Bituminous Materials has contributed significantly in many important ways to the roofing community's stabilization including issuing standard specifications to assist consumers in the selection and use of these systems. This is not surprising, as itmore » has always been among the purpose of D8 to provide standards to assist in the selection and use of low-sloped and steep roofing. The Committee's scope includes development of standards associated with application, inspection, maintenance, and analyses. Some of the issues facing the roofing community today--for example, enhanced system durability, better methods of material characterization, environmental impact, recycling of materials and systems, industry conversation to the S.I. system metric--readily fall within D8's scope. The availability of sound standard can contribute to the resolution of many of these issues.« less

From cottage industry to a dominant mode of primary care: stages in the diffusion of a health care innovation (retail clinics).

PubMed

McKinlay, John B; Marceau, Lisa D

2012-09-01

Primary health care is essential to population health and there is increasing need for it, especially with an aging population with multiple comorbidities. Primary health care in the U.S. is widely considered in an ever-deepening crisis. This paper presents a detailed case study of the recent rise of a "disruptive innovation" - retail clinics - which have the potential to transform the face of primary health care in the US. We describe six stages in the diffusion of retail clinics, from cottage industry to a dominant mode for the delivery of primary health care, and consider sociopolitical influences that facilitate and impede their emerging potential. Retail clinics may provide a strategic opportunity to re-engineer the primary health care system, although they may also produce worrisome unanticipated consequences. Discussion concerning the potential threats and opportunities posed by retail clinics occurs in the absence of sound evidence concerning their comparative effectiveness and quality-of-care. This case study identifies the sociopolitical influences and processes that determine whether health care innovations rise or fall, and highlights critically important points along the pathway to health system change. Copyright © 2012 Elsevier Ltd. All rights reserved.

46 CFR 11.530 - Endorsements for engineers of uninspected fishing industry vessels.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Endorsements for engineers of uninspected fishing... MARINE OFFICERS AND SEAMEN REQUIREMENTS FOR OFFICER ENDORSEMENTS Professional Requirements for Engineer Officer § 11.530 Endorsements for engineers of uninspected fishing industry vessels. (a) This section...

46 CFR 11.530 - Endorsements for engineers of uninspected fishing industry vessels.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Endorsements for engineers of uninspected fishing... MARINE OFFICERS AND SEAMEN REQUIREMENTS FOR OFFICER ENDORSEMENTS Professional Requirements for Engineer Officer § 11.530 Endorsements for engineers of uninspected fishing industry vessels. (a) This section...

46 CFR 11.530 - Endorsements for engineers of uninspected fishing industry vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Endorsements for engineers of uninspected fishing... MARINE OFFICERS AND SEAMEN REQUIREMENTS FOR OFFICER ENDORSEMENTS Professional Requirements for Engineer Officer § 11.530 Endorsements for engineers of uninspected fishing industry vessels. (a) This section...

Why Industry Must Step In to Train Engineers.

ERIC Educational Resources Information Center

Business Week, 1981

1981-01-01

Suggests industrial training of Japanese engineers since engineering education in Japan focuses on abstract science and rote learning of fundamental principles and not on practical laboratory experiences characteristic of training in the United States. (SK)

26 CFR 1.971-1 - Definitions with respect to export trade corporations.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., industrial, financial, technical, scientific, managerial, engineering, architectural, skilled, or other..., industrial, financial, technical, scientific, managerial, engineering, architectural, skilled, or other... performance for any person of commercial, industrial, financial, technical, scientific, managerial...

26 CFR 1.971-1 - Definitions with respect to export trade corporations.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., industrial, financial, technical, scientific, managerial, engineering, architectural, skilled, or other..., industrial, financial, technical, scientific, managerial, engineering, architectural, skilled, or other... performance for any person of commercial, industrial, financial, technical, scientific, managerial...

Aerospace engineering educational program

NASA Technical Reports Server (NTRS)

Craft, William; Klett, David; Lai, Steven

1992-01-01

The principle goal of the educational component of NASA CORE is the creation of aerospace engineering options in the mechanical engineering program at both the undergraduate and graduate levels. To accomplish this goal, a concerted effort during the past year has resulted in detailed plans for the initiation of aerospace options in both the BSME and MSME programs in the fall of 1993. All proposed new courses and the BSME aerospace option curriculum must undergo a lengthy approval process involving two cirriculum oversight committees (School of Engineering and University level) and three levels of general faculty approval. Assuming approval is obtained from all levels, the options will officially take effect in Fall '93. In anticipation of this, certain courses in the proposed curriculum are being offered during the current academic year under special topics headings so that current junior level students may graduate in May '94 under the BSME aerospace option. The proposed undergraduate aerospace option curriculum (along with the regular mechanical engineering curriculum for reference) is attached at the end of this report, and course outlines for the new courses are included in the appendix.

Flat-plate solar array progress and plans

NASA Technical Reports Server (NTRS)

Callaghan, W. T.; Henry, P. K.

1984-01-01

The Flat-Plate Solar Array Project (FSA), sponsored by the U.S. Department of Energy (DOE) and managed by the Jet Propulsion Laboratory (JPL), has achieved progress in a broad range of technical activities since that reported at the Fourth European Communities Conference. A particularly important analysis has been completed recently which confirms the adoption into practice by the U.S. Photovoltaic (PV Industry, of all the low-cost module technology elements proposed at the 16th Project Integration Meeting for a $2.80/Wp (1980 U.S. Dollars) design approach in the fall of 1980. This work presents along with a projection, using the same techniques, for what is believed to be a very credible ribbon-based module design for less that $0.55/Wp (1980 U.S. Dollars). Other areas to be reported upon include low-cost Si feedstock refinement; ribbon growth; process sequence development for cells; environmental isolation; engineering science investigations; and module testing progress.

Interactive mechanism of working environments and construction behaviors with cognitive work analysis: an elevator installation case study.

PubMed

Wang, Yanqing; Chong, Heap-Yih; Liao, Pin-Chao; Ren, Hantao

2017-09-25

Unsafe behavior is a leading factor in accidents, and the working environment significantly affects behaviors. However, few studies have focused on detailed mechanisms for addressing unsafe behaviors resulting from environmental constraints. This study aims to delineate these mechanisms using cognitive work analysis (CWA) for an elevator installation case study. Elevator installation was selected for study because it involves operations at heights: falls from heights remain a major cause of construction worker mortality. This study adopts a mixed research approach based on three research methodology stages. This research deconstructs the details of the working environment, the workers' decision-making processes, the strategies chosen given environmental conditions and the conceptual model for workers' behaviors, which jointly depict environment-behavior mechanisms at length. By applying CWA to the construction industry, environmental constraints can easily be identified, and targeted engineering suggestions can be generated.

The Relationship between Job Satisfaction and Intent to Turnover among Software Engineers in the Information Technology Industry

ERIC Educational Resources Information Center

Agada, Chuks N.

2013-01-01

The focus of this study was to examine the relationship between job satisfaction and intent to turnover among software engineers in the information technology (IT) industry. The population that was analyzed in this study was software engineers in the IT industry to determine whether there is a relationship between job satisfaction and intent to…

The Role of Industry in Minority Engineering Programs.

ERIC Educational Resources Information Center

Branigan, Thomas L.

Until recently, U.S. engineering education and American industry drew candidates from only about 43 percent of the potential market--white males. Many segments of American business, education, and government have been involved in a process to increase minority participation in engineering; the 1974 freshmen engineering enrollment for women…

Establishing a "Centre for Engineering Experimentation and Design Simulation": A Step towards Restructuring Engineering Education in India

ERIC Educational Resources Information Center

Venkateswarlu, P.

2017-01-01

Reforms in undergraduate engineering curriculum to produce engineers with entrepreneurial skills should address real-world problems relevant to industry and society with active industry support. Technology-assisted, hands-on projects involving experimentation, design simulation and prototyping will transform graduates into professionals with…

32 CFR 644.424 - Development of public port or industrial facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... industrial facilities upon the available land shall file a written application with the District Engineer... development of public port or industrial facilities, the District Engineer shall give notice of such... 32 National Defense 4 2011-07-01 2011-07-01 false Development of public port or industrial...

32 CFR 644.424 - Development of public port or industrial facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... industrial facilities upon the available land shall file a written application with the District Engineer... development of public port or industrial facilities, the District Engineer shall give notice of such... 32 National Defense 4 2010-07-01 2010-07-01 true Development of public port or industrial...

Motor vehicle fatalities in the United States construction industry.

PubMed

Ore, T; Fosbroke, D E

1997-09-01

A death certificate-based surveillance system was used to identify 2144 work-related motor vehicle fatalities among civilian workers in the United States construction industry over the years 1980-92. Construction workers were twice as likely to be killed by a motor vehicle as the average worker, with an annual crude mortality rate of 2.3/100,000 workers. Injury prevention efforts in construction have had limited effect on motor vehicle-related deaths, with death rates falling by only 11% during the 13-year period, compared with 43% for falls, 54% for electrocutions and 48% for machinery. In all industries combined, motor vehicle fatality rates dropped by 47%. The largest proportion of motor vehicle deaths (40%) occurred among pedestrians, with construction accounting for more than one-fourth of all pedestrian deaths. A minimum of 54 (6%) of these pedestrian fatalities were flaggers or surveyors. Flaggers accounted for half the 34 pedestrian fatalities among women, compared with only 3% among men. Along with previous studies and recent trends in the amount and type of road construction, these results underscore the need for better traffic control management in construction work areas to reduce pedestrian fatalities. As the second leading cause of traumatic death in construction, with an annual average share of 15% of the total deaths, exceeded only by falls, prevention of work-related motor vehicle research should become a greater priority in the construction industry.

A project to transfer technology from NASA centers in support of industrial innovation in the midwest

NASA Technical Reports Server (NTRS)

Barr, B. G.

1986-01-01

A technology transfer program utilizing graduate students in mechanical engineering at the University of Kansas was initiated in early 1981. The objective of the program was to encourage industrial innovation in the Midwest through improved industry/university cooperation and the utilization of NASA technology. A related and important aspect of the program was the improvement of graduate engineering education through the involvement of students in the identification and accomplishment of technological objectives in cooperation with scientists at NASA centers and engineers in industry. The pilot NASA/University Industrial Innovation Program was an outstanding success based on its ability to: attract top graduate students; secure industry support; and stimulate industry/university cooperation leading to enhanced university capability and utilization of advanced technology by industry.

Risk factors, incidence, consequences and prevention strategies for falls and fall-injury within older indigenous populations: a systematic review.

PubMed

Lukaszyk, Caroline; Harvey, Lara; Sherrington, Cathie; Keay, Lisa; Tiedemann, Anne; Coombes, Julieann; Clemson, Lindy; Ivers, Rebecca

2016-12-01

To examine the risk factors, incidence, consequences and existing prevention strategies for falls and fall-related injury in older indigenous people. Relevant literature was identified through searching 14 electronic databases, a range of institutional websites, online search engines and government databases, using search terms pertaining to indigenous status, injury and ageing. Thirteen studies from Australia, the United States, Central America and Canada were identified. Few studies reported on fall rates but two reported that around 30% of indigenous people aged 45 years and above experienced at least one fall during the past year. The most common hospitalised fall injuries among older indigenous people were hip fracture and head injury. Risk factors significantly associated with falls within indigenous populations included poor mobility, a history of stroke, epilepsy, head injury, poor hearing and urinary incontinence. No formally evaluated, indigenous-specific fall prevention interventions were identified. Falls are a significant and growing health issue for older indigenous people worldwide that can lead to severe health consequences and even death. No fully-evaluated, indigenous-specific fall prevention programs were identified. Implications for Public Health: Research into fall patterns and fall-related injury among indigenous people is necessary for the development of appropriate fall prevention interventions. © 2016 Public Health Association of Australia.

Service-Learning Integrated throughout a College of Engineering (SLICE)

ERIC Educational Resources Information Center

Duffy, John; Barrington, Linda; West, Cheryl; Heredia, Manuel; Barry, Carol

2011-01-01

In the fall of 2004 a college began a program to integrate service-learning (S-L) projects into required engineering courses throughout the curriculum, so that students would be exposed to S-L in at least one course in each of eight semesters. The ultimate goal is to graduate better engineers and more engaged citizens and to improve communities,…

Engineering Colleges Report 10% of Faculty Positions Vacant in Fall 1980. Science Resources Studies Highlights.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC. Div. of Science Resources Studies.

The results of a National Science Foundation survey of 181 engineering colleges are summarized in this report which focuses on the extent of and reasons for faculty vacancies and effects of staffing problems. Major findings indicate that: (1) most deans of engineering colleges believe that difficulties in filling faculty slots have impaired the…

Industry and Higher Education: Collaboration To Improve Students' Learning and Training.

ERIC Educational Resources Information Center

Wright, Peter W. G., Ed.

This volume of essays sets out to consider the contributions that higher education and industry, understood in the widest sense, could make to improving the quality of students' learning and to increasing its relevance to the needs of employment. The essays fall into four parts, the first of which is on how the relationship between industry and…

Logic and Belief across the Lifespan: The Rise and Fall of Belief Inhibition during Syllogistic Reasoning

ERIC Educational Resources Information Center

De Neys, Wim; Van Gelder, Elke

2009-01-01

Popular reasoning theories postulate that the ability to inhibit inappropriate beliefs lies at the heart of the human reasoning engine. Given that people's inhibitory capacities are known to rise and fall across the lifespan, we predicted that people's deductive reasoning performance would show similar curvilinear age trends. A group of children…

Shift-work disorder and sleep-related environmental factors in the manufacturing industry.

PubMed

Taniyama, Yukari; Nakamura, Arisa; Yamauchi, Takenori; Takeuchi, Shouhei; Kuroda, Yoshiki

2015-03-01

The aim of this study was to examine the relationship between shift-work disorder (SWD) and environmental and somatic factors related to falling asleep among rapidly rotating shift workers in a manufacturing industry.A total of 556 male workers were recruited to complete a self-administered questionnaire regarding age, shift work experience, lifestyle, and family structure; the Epworth sleepiness scale (ESS); the Pittsburgh sleep quality index (PSQI); and the Horne and Ostberg questionnaire, a questionnaire for environmental and somatic factors related to falling asleep. We classified workers according to having SWD or not, and compared workers with SWD with those without this disorder in terms of all items covered in the aforementioned questionnaires. A total of 208 workers (62.8%) working rapidly rotating shifts were diagnosed with SWD. The ESS and PSQI scores and scores for environmental and somatic factors were significantly higher in workers with SWD than in those without this disorder. The ESS scores and scores for environmental and somatic factors were also associated with SWD in the logistic regression analyses. We suggest that susceptibility to SWD in the manufacturing industry may be associated with environmental and somatic factors related to falling asleep.

Perspectives and Plans for Graduate Studies. 11. Engineering 1974. E. Industrial Engineering and Systems Design. Report No. 74-22.

ERIC Educational Resources Information Center

Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

On the instruction of the Council of Ontario Universities, the Advisory Committee on Academic Planning in cooperation with the Committee of Ontario Deans of Engineering has conducted a planning assessment for doctoral work in industrial engineering and systems design. Recommendations for doctoral work in engineering studies are presented.…

15 CFR 801.9 - Reports required.

Code of Federal Regulations, 2011 CFR

2011-01-01

...); industrial engineering services; industrial-type maintenance, installation, alteration, and training services... services; educational and training services; engineering, architectural, and surveying services; financial... assets covered by the BE-125 survey are rights related to: Industrial processes and products; books...

15 CFR 801.9 - Reports required.

Code of Federal Regulations, 2010 CFR

2010-01-01

...); industrial engineering services; industrial-type maintenance, installation, alteration, and training services... services; educational and training services; engineering, architectural, and surveying services; financial... assets covered by the BE-125 survey are rights related to: Industrial processes and products; books...

15 CFR 801.9 - Reports required.

Code of Federal Regulations, 2012 CFR

2012-01-01

...); industrial engineering services; industrial-type maintenance, installation, alteration, and training services... services; educational and training services; engineering, architectural, and surveying services; financial... assets covered by the BE-125 survey are rights related to: Industrial processes and products; books...

Evolutionary engineering of industrial microorganisms-strategies and applications.

PubMed

Zhu, Zhengming; Zhang, Juan; Ji, Xiaomei; Fang, Zhen; Wu, Zhimeng; Chen, Jian; Du, Guocheng

2018-06-01

Microbial cells have been widely used in the industry to obtain various biochemical products, and evolutionary engineering is a common method in biological research to improve their traits, such as high environmental tolerance and improvement of product yield. To obtain better integrate functions of microbial cells, evolutionary engineering combined with other biotechnologies have attracted more attention in recent years. Classical laboratory evolution has been proven effective to letting more beneficial mutations occur in different genes but also has some inherent limitations such as a long evolutionary period and uncontrolled mutation frequencies. However, recent studies showed that some new strategies may gradually overcome these limitations. In this review, we summarize the evolutionary strategies commonly used in industrial microorganisms and discuss the combination of evolutionary engineering with other biotechnologies such as systems biology and inverse metabolic engineering. Finally, we prospect the importance and application prospect of evolutionary engineering as a powerful tool especially in optimization of industrial microbial cell factories.

Pharmaceutical and industrial protein engineering: where we are?

PubMed

Amara, Amro Abd-Al-Fattah

2013-01-01

The huge amount of information, the big number of scientists and their efforts, labs, man/hrs, fund, companies all and others factors build the success of the amazing new branch of genetic engineering the 'protein engineering' (PE). It concerns with the modification of protein structure/function(s) or building protein from scratch. The engineered proteins usually have new criteria(s). Engineering proteins can be mediated on the level of genes or proteins. PE fined its way in different important sectors including industrial, pharmaceutical and medicinal ones. Aspects about PE and its applications will be discussed with this review. The concept, tools, and the industrial applications of the protein, engineered proteins and PE will be under focus. In order to get up to date knowledge about the applications of PE in basic protein and molecular biology, several examples are discussed. PE can play a significant role in different industrial and pharmaceutical sectors if used wisely and selectively.

Fast engineering optimization: A novel highly effective control parameterization approach for industrial dynamic processes.

PubMed

Liu, Ping; Li, Guodong; Liu, Xinggao

2015-09-01

Control vector parameterization (CVP) is an important approach of the engineering optimization for the industrial dynamic processes. However, its major defect, the low optimization efficiency caused by calculating the relevant differential equations in the generated nonlinear programming (NLP) problem repeatedly, limits its wide application in the engineering optimization for the industrial dynamic processes. A novel highly effective control parameterization approach, fast-CVP, is first proposed to improve the optimization efficiency for industrial dynamic processes, where the costate gradient formulae is employed and a fast approximate scheme is presented to solve the differential equations in dynamic process simulation. Three well-known engineering optimization benchmark problems of the industrial dynamic processes are demonstrated as illustration. The research results show that the proposed fast approach achieves a fine performance that at least 90% of the computation time can be saved in contrast to the traditional CVP method, which reveals the effectiveness of the proposed fast engineering optimization approach for the industrial dynamic processes. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Industrial Strength Changes in Engineering Education.

ERIC Educational Resources Information Center

Chatziioanou, Alypios; Sullivan, Edward

2002-01-01

Addresses the question of how closely the objectives of industry and engineering education should be aligned. Examines trends in college-business relationships using the example of California Polytechnic State University. Reflects on benefits and problems of closer connections with industry. (SK)

Case Study: Meeting the Demand for Skilled Precision Engineers

ERIC Educational Resources Information Center

Sansom, Chris; Shore, Paul

2008-01-01

Purpose: This paper aims to demonstrate how science and engineering graduates can be recruited and trained to Masters level in precision engineering as an aid to reducing the skills shortage of mechanical engineers in UK industry. Design/methodology/approach: The paper describes a partnership between three UK academic institutions and industry,…

78 FR 1522 - Semiannual Regulatory Agenda, Fall 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

..., interstate movement, and environmental release of certain genetically engineered organisms and update the... of Organisms 0579-AC31 and Products Altered or Produced Through Genetic Engineering. 139 Importation..., Riverdale, MD 20737-1231, Phone: 301 851-2286. RIN: 0579-AC05 138. Introduction of Organisms and Products...

Perm State University HPC-hardware and software services: capabilities for aircraft engine aeroacoustics problems solving

NASA Astrophysics Data System (ADS)

Demenev, A. G.

2018-02-01

The present work is devoted to analyze high-performance computing (HPC) infrastructure capabilities for aircraft engine aeroacoustics problems solving at Perm State University. We explore here the ability to develop new computational aeroacoustics methods/solvers for computer-aided engineering (CAE) systems to handle complicated industrial problems of engine noise prediction. Leading aircraft engine engineering company, including “UEC-Aviadvigatel” JSC (our industrial partners in Perm, Russia), require that methods/solvers to optimize geometry of aircraft engine for fan noise reduction. We analysed Perm State University HPC-hardware resources and software services to use efficiently. The performed results demonstrate that Perm State University HPC-infrastructure are mature enough to face out industrial-like problems of development CAE-system with HPC-method and CFD-solvers.

48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... engineering, development, or research capability. ...

48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... engineering, development, or research capability. ...

48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... engineering, development, or research capability. ...

Profiles of Automotive Suppliers Industries--Engineered Mechanical Components and Systems : Volume II, Appendices.

DOT National Transportation Integrated Search

1981-09-01

The profile describes and analyzes that segment of the automotive supplier industry which provides engineered mechanical components/assemblies/systems to the prime auto manufacturers. It presents an overview of the role and structure of this industry...

Navy/ASEE (American Society for Engineering Education) Summer Faculty Research Program, 1985.

DTIC Science & Technology

1986-05-15

MECHANICAL ENGINEERING ASTRONOMY MECHANICAL ENGINEERING DEPT. 07 PHYSICS/ASTR. BETHLEHEM ,PA 18015 EAU CLAIR2 ,WI 54701 ROBERT HARTFORD TIMOTHY LANCEY...GA 30910 KLAMATH FALLS ,OR 97601 RICHARD MESSNER HORACE REYNOLDS UN:V OF NEW HAMPSHIRE GALLAUDET ELECTRICAL ENGINEERING PSYCHOLOGY E.C.E. DEPARTMENT...HOWARD’ U:V:ERSICY 4 DC CATHOLU. UNIVERSIT 4 DC HOWARD NVESC 4 DC HOWARD U NIVERSITYf 4 DC CATHOLIT’ UNIVERSITY DC GALLAUDET 4 DC AINERICA:; :;VRIY4 DE

Computational Electronics and Electromagnetics

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeFord, J.F.

The Computational Electronics and Electromagnetics thrust area is a focal point for computer modeling activities in electronics and electromagnetics in the Electronics Engineering Department of Lawrence Livermore National Laboratory (LLNL). Traditionally, they have focused their efforts in technical areas of importance to existing and developing LLNL programs, and this continues to form the basis for much of their research. A relatively new and increasingly important emphasis for the thrust area is the formation of partnerships with industry and the application of their simulation technology and expertise to the solution of problems faced by industry. The activities of the thrust areamore » fall into three broad categories: (1) the development of theoretical and computational models of electronic and electromagnetic phenomena, (2) the development of useful and robust software tools based on these models, and (3) the application of these tools to programmatic and industrial problems. In FY-92, they worked on projects in all of the areas outlined above. The object of their work on numerical electromagnetic algorithms continues to be the improvement of time-domain algorithms for electromagnetic simulation on unstructured conforming grids. The thrust area is also investigating various technologies for conforming-grid mesh generation to simplify the application of their advanced field solvers to design problems involving complicated geometries. They are developing a major code suite based on the three-dimensional (3-D), conforming-grid, time-domain code DSI3D. They continue to maintain and distribute the 3-D, finite-difference time-domain (FDTD) code TSAR, which is installed at several dozen university, government, and industry sites.« less

An Overview of the Academic Pathways Study: Research Processes and Procedures. Technical Report #CAEE-TR-09-03. Summer 2003-Fall 2008

ERIC Educational Resources Information Center

Sheppard, Sheri; Atman, Cindy; Fleming, Lorraine; Miller, Ron; Smith, Karl; Stevens, Reed; Streveler, Ruth; Clark, Mia; Loucks-Jaret, Tina; Lund, Dennis

2010-01-01

The Center for the Advancement of Engineering Education (CAEE) began in January 2003 with a grant from the National Science Foundation (ESI-0227558). Two NSF Directorates, Engineering and Education and Human Resources, oversee the Center's work. The Academic Pathways Study (APS) is part of the Scholarship on Learning Engineering element of the…

Graduate Enrollment in Science and Engineering Grew Substantially in the Past Decade but Slowed in 2010. InfoBrief. NSF 12-317

ERIC Educational Resources Information Center

Kang, Kelly

2012-01-01

Approximately 632,700 graduate students were enrolled in science, engineering, and health (SEH) programs in the United States as of fall 2010, a 30% increase from approximately 493,300 students in 2000, according to the National Science Foundation's (NSF's) Survey of Graduate Students and Postdoctorates in Science and Engineering (GSS). The growth…

Challenges, issues and trends in fall detection systems

PubMed Central

2013-01-01

Since falls are a major public health problem among older people, the number of systems aimed at detecting them has increased dramatically over recent years. This work presents an extensive literature review of fall detection systems, including comparisons among various kinds of studies. It aims to serve as a reference for both clinicians and biomedical engineers planning or conducting field investigations. Challenges, issues and trends in fall detection have been identified after the reviewing work. The number of studies using context-aware techniques is still increasing but there is a new trend towards the integration of fall detection into smartphones as well as the use of machine learning methods in the detection algorithm. We have also identified challenges regarding performance under real-life conditions, usability, and user acceptance as well as issues related to power consumption, real-time operations, sensing limitations, privacy and record of real-life falls. PMID:23829390

Biocatalysis in the Pharmaceutical Industry: The Need for Speed

PubMed Central

2017-01-01

The use of biocatalysis in the pharmaceutical industry continues to expand as a result of increased access to enzymes and the ability to engineer those enzymes to meet the demands of industrial processes. However, we are still just scratching the surface of potential biocatalytic applications. The time pressures present in pharmaceutical process development are incompatible with the long lead times required for engineering a suitable biocatalyst. Dramatic increases in the speed of protein engineering are needed to deliver on the ever increasing opportunities for industrial biocatalytic processes. PMID:28523096

Biocatalysis in the Pharmaceutical Industry: The Need for Speed.

PubMed

Truppo, Matthew D

2017-05-11

The use of biocatalysis in the pharmaceutical industry continues to expand as a result of increased access to enzymes and the ability to engineer those enzymes to meet the demands of industrial processes. However, we are still just scratching the surface of potential biocatalytic applications. The time pressures present in pharmaceutical process development are incompatible with the long lead times required for engineering a suitable biocatalyst. Dramatic increases in the speed of protein engineering are needed to deliver on the ever increasing opportunities for industrial biocatalytic processes.

A decision tree model for the implementation of a safety strategy in the horse-racing industry.

PubMed

Hitchens, Peta L; Curry, Beverley; Blizzard, C Leigh; Palmer, Andrew J

2015-04-01

The profession of a horse-racing jockey is a dangerous one. We developed a decision tree model quantifying the effects of implementing different safety strategies on jockey fall and injury rates and their associated costs. Data on race-day falls were obtained from stewards' reports from August 2002 to July 2009. Insurance claim data were provided by Principal Racing Authorities and workers' compensation authorities in each jurisdiction. Fall and claim incidence data were used as baseline rates. The model considered (1) the status quo, in which policy was unchanged; and (2) compared it with four hypothetical changes in policy that restricted apprentice jockeys from riding less-accomplished horses, with the aim of improving safety by reducing incidence of injurious jockey falls. Second-order Monte Carlo simulations were conducted to account for uncertainties. The point estimate for mean costs of falls under the status quo was $30.73/ride, with falls by apprentice jockeys with <250 career race rides riding horses with less than five race starts contributing the highest costs ($98.49/ride). The hypothetical safety strategies resulted in a 1.04%-5.07% decrease in fall rates versus status quo. For three of the four strategies, significant reductions of 8.74%-13.13% in workers' compensation costs over one single race season were predicted. Costs were highly sensitive to large claims. This model is a useful instrument for comparing potential changes in cost and risks associated with implementing new safety strategies in the horseracing industry. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

China’s Aerospace Industry: Technology, Funding and Modernization

DTIC Science & Technology

1992-01-01

7 was to use a General Electric F404 engine (from the F-20 Tigershark) along with other foreign engines as candidates but that program was again...firms like General Electric and Pratt & Whitney. As the Chinese engine industry gets more behind, more foreign engines are chosen, and the factories have... Electric since 1984.81 Liming Engine Plant makes compressor disks and turbine disks for GE and turbine disks for Pratt & Whitney while the Chengdu Engine

NRL Fact Book

DTIC Science & Technology

2002-11-01

CRADAs) under which NRL scientists and engineers work together with industry , academia, state or local governments, or other Federal agencies to... industrial hygiene, and environ- mental safety. The Division provides engineering and technical assistance to research divisions in the installation...The NRL Women in Science and Engineer - ing (WISE) Network is an open-membership network group of scientists and engineers who meet periodically to

Institute-Industry Interoperation Model: An Industry-Oriented Engineering Education Strategy in China

ERIC Educational Resources Information Center

Wang, Yanqing; Qi, Zhongying; Li, Ziru; Zhang, Lijie

2011-01-01

Engineering education has been well implemented in the majority of developed countries such as the USA, Germany, and the United Kingdom so that the gap between engineering science and engineering practice is greatly bridged. However, in China, the gap still exists, and some attempts by Chinese government, even though having made obvious progress,…

A Multidisciplinary PBL Approach for Teaching Industrial Informatics and Robotics in Engineering

ERIC Educational Resources Information Center

Calvo, Isidro; Cabanes, Itziar; Quesada, Jeronimo; Barambones, Oscar

2018-01-01

This paper describes the design of an industrial informatics course, following the project-based learning methodology, and reports the experience of four academic years (from 2012-13 to 2015-16). Industrial Informatics is a compulsory course taught in the third year of the B.Sc. degree in industrial electronics and automation engineering at the…

[Some engineering problems on developing production industry of modern traditional Chinese medicine].

PubMed

Qu, Hai-bin; Cheng, Yi-yu; Wang, Yue-sheng

2003-10-01

Based on the review of some engineering problems on developing modern production industry of Traditional Chinese Medicine (TCM), the differences of TCM production industry between China and abroad were pointed out. Accelerating the application and extension of high-tech and computer integrated manufacturing system (CIMS) were suggested to promote the technology advancement of TCM industry.

Get connected: New Fall Meeting technology

NASA Astrophysics Data System (ADS)

Moscovitch, Mirelle

2012-11-01

Kick off your 2012 Fall Meeting experience today by joining the Fall Meeting Community, an interactive Web-based community. Whether you are attending this year's Fall Meeting or are just interested in learning more, this site can help you connect with colleagues, learn about the groundbreaking research and amazing programming being presented in San Francisco, and plan your trip to the largest Earth and space science conference of the year. Available through the Fall Meeting Web site (http://fallmeeting.agu.org), the Community allows you to share your Fall Meeting experience like never before. You can join groups based on your interests, and each group includes a message board that allows you to ask questions, post comments, discuss presentations, and make plans with colleagues. You can also create your own groups and use the Community's robust search engine to find and connect with friends. And because the Fall Meeting Web site was improved for 2012 to allow for nearly seamless functionality on mobile devices, you can access much of the same Community functionality on the go.

Free Falling in Stratified Fluids

NASA Astrophysics Data System (ADS)

Lam, Try; Vincent, Lionel; Kanso, Eva

2017-11-01

Leaves falling in air and discs falling in water are examples of unsteady descents due to complex interaction between gravitational and aerodynamic forces. Understanding these descent modes is relevant to many branches of engineering and science such as estimating the behavior of re-entry space vehicles to studying biomechanics of seed dispersion. For regularly shaped objects falling in homogenous fluids, the motion is relatively well understood. However, less is known about how density stratification of the fluid medium affects the falling behavior. Here, we experimentally investigate the descent of discs in both pure water and in stable linearly stratified fluids for Froude numbers Fr 1 and Reynolds numbers Re between 1000 -2000. We found that stable stratification (1) enhances the radial dispersion of the disc at landing, (2) increases the descent time, (3) decreases the inclination (or nutation) angle, and (4) decreases the fluttering amplitude while falling. We conclude by commenting on how the corresponding information can be used as a predictive model for objects free falling in stratified fluids.

High School and College Kids Collaborate on BOTS Competition

ERIC Educational Resources Information Center

Hance, Dennis

2012-01-01

During the fall semester of 2010, mechanical engineering students from Edison State Community College and Wright State University shared their skills and knowledge with students from the Upper Valley JVS (UVJVS) pre-engineering technology program in a highly motivating robotics activity. The activity culminated in 47 teams from regional high…

Parabolic Mirror: Focusing on Science, Technology, Engineering, and Math

ERIC Educational Resources Information Center

Smith, Karianne; Hughes, William

2013-01-01

In the fall of 2011, Park Forest Middle School (PFMS) students approached the STEM faculty with numerous questions regarding the popular television show Myth Busters, which detailed Greek mathematician, physicist, engineer, and inventor, Archimedes. Two episodes featured attempts to test historical accounts that Archimedes developed a death ray…

Deconstruction Geography: A STEM Approach

ERIC Educational Resources Information Center

Gehlhar, Adam M.; Duffield, Stacy K.

2015-01-01

This article will define the engineering design process used to create an integrated curriculum at STEM Center Middle School, and it features the planning, implementation, and revision of the Deconstruction Geography unit. The Science Technology Engineering and Math (STEM) Center opened in the fall of 2009 as a way to relieve overcrowding at the…

You Can't Reach for the Stars if You are Tripping Over the Ground! (Preventing Slips, Trips, and Falls)

NASA Technical Reports Server (NTRS)

Miller, Darcy; Raysich, Mark; Kirkland, Mary

2016-01-01

Although there are very few mishaps related to ground, vehicle or payload processing at the Kennedy Space Center (KSC), employees have experienced a significant number of injuries due to slips, trips, and falls outside of performing flight processing operations. Slips, trips, and falls are major causes of occupational injuries at KSC, the National Aeronautics and Space Administration (NASA), and in general industry. To help KSC employees avoid these injuries, and allow them to be fully productive, KSC launched an initiative in 2013 to reduce slips, trips, and falls. This initiative is based on a four-part model focusing on DATA analysis, HAZARD awareness, PREVENTIVE methods, and BALANCE.

Investigating risk factors for slips, trips and falls in New Zealand residential construction using incident-centred and incident-independent methods.

PubMed

Bentley, Tim A; Hide, Sophie; Tappin, David; Moore, Dave; Legg, Stephen; Ashby, Liz; Parker, Richard

2006-01-15

Slip, trip and fall (STF) incidents, particularly falls from a height, are a leading cause of injury in the New Zealand residential construction industry. The most common origins of falls from a height in this sector are ladders, scaffolding and roofs, while slipping is the most frequent fall initiating event category. The study aimed to provide detailed information on construction industry STF risk factors for high-risk tasks, work equipment and environments, as identified from an earlier analysis of STF claims data, together with information to be used in the development of interventions to reduce STF risk in New Zealand residential construction. The study involved the use of both incident-centred and incident-independent methods of investigation, including detailed follow-up investigations of incidents and observations and interviews with workers on construction sites, to provide data on a wide range of risk factors. A large number of risk factors for residential construction STFs were identified, including factors related to the work environment, tasks and the use and availability of appropriate height work equipment. The different methods of investigation produced complementary information on factors related to equipment design and work organization, which underlie some of the site conditions and work practices identified as key risk factors for residential construction STFs. A conceptual systems model of residential construction STF risk is presented.

Engineering English and the High-Tech Industry: A Case Study of an English Needs Analysis of Process Integration Engineers at a Semiconductor Manufacturing Company in Taiwan

ERIC Educational Resources Information Center

Spence, Paul; Liu, Gi-Zen

2013-01-01

The global high-tech industry is characterized by extreme competitiveness, innovation, and widespread use of English. Consequently, Taiwanese high-tech companies require engineers that are talented in both their engineering and English abilities. In response to the lack of knowledge regarding the English skills needed by engineers in Taiwan's…

Infant Care--Does Anybody Care?

ERIC Educational Resources Information Center

Mills, Belen C.; And Others

1988-01-01

Discusses infant care in the United States by comparing U.S. practices of infant care to that in other industrialized nations. Suggests that in comparison to several other industrialized nations, the U.S. falls behind in providing support for mothers either to stay at home or to have quality alternative child care. (RJC)

Mining Task Force Report.

ERIC Educational Resources Information Center

Saskatchewan Inst. of Applied Science and Technology, Saskatoon.

In fall 1988, the Board of Directors of the Saskatchewan Institute of Applied Science and Technology (SIAST) created a task force to study the training needs of the mining industry in the province and evaluate SIAST's responsiveness to those needs. After assessing the technological changes taking place in the industry, surveying manpower needs,…

Hazardous Waste Cleanup: Frontier Chemical Waste Process Incorporated – Royal Avenue Site in Niagara Falls, New York

EPA Pesticide Factsheets

Frontier Chemical Waste Process facility is located in a heavy industrial/commercial area. Several large industrial facilities surround the facility. The closest residential area is located about ½ mile west and the closest off-site building is located 300

Turning the System Around: College-Corporation Cooperation for Mutual Development.

ERIC Educational Resources Information Center

Beman, Richard R.; Parsons, Michael H.

In fall 1977, Hagerstown Junior College and the Certain-Teed Corporation initiated a business/industry/college instructional program to upgrade the skills of corporate first-line supervisory personnel and to increase the visibility of the college's associate degree Management program among local business and industry. Fourteen supervisors enrolled…

78 FR 72755 - Version 5 Critical Infrastructure Protection Reliability Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... (e.g., thumb drives and laptop computers) that fall outside of the BES Cyber Asset definition.\\5... implementation study is part of a larger program that includes the development of guidance, outreach to industry... the goals of the implementation study include: (1) Improving industry's understanding of the technical...

Three-Dimensional Computational Fluid Dynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haworth, D.C.; O'Rourke, P.J.; Ranganathan, R.

1998-09-01

Computational fluid dynamics (CFD) is one discipline falling under the broad heading of computer-aided engineering (CAE). CAE, together with computer-aided design (CAD) and computer-aided manufacturing (CAM), comprise a mathematical-based approach to engineering product and process design, analysis and fabrication. In this overview of CFD for the design engineer, our purposes are three-fold: (1) to define the scope of CFD and motivate its utility for engineering, (2) to provide a basic technical foundation for CFD, and (3) to convey how CFD is incorporated into engineering product and process design.

Engaging Community College Students Using an Engineering Learning Community

NASA Astrophysics Data System (ADS)

Maccariella, James, Jr.

The study investigated whether community college engineering student success was tied to a learning community. Three separate data collection sources were utilized: surveys, interviews, and existing student records. Mann-Whitney tests were used to assess survey data, independent t-tests were used to examine pre-test data, and independent t-tests, analyses of covariance (ANCOVA), chi-square tests, and logistic regression were used to examine post-test data. The study found students that participated in the Engineering TLC program experienced a significant improvement in grade point values for one of the three post-test courses studied. In addition, the analysis revealed the odds of fall-to-spring retention were 5.02 times higher for students that participated in the Engineering TLC program, and the odds of graduating or transferring were 4.9 times higher for students that participated in the Engineering TLC program. However, when confounding variables were considered in the study (engineering major, age, Pell Grant participation, gender, ethnicity, and full-time/part-time status), the analyses revealed no significant relationship between participation in the Engineering TLC program and course success, fall-to-spring retention, and graduation/transfer. Thus, the confounding variables provided alternative explanations for results. The Engineering TLC program was also found to be effective in providing mentoring opportunities, engagement and motivation opportunities, improved self confidence, and a sense of community. It is believed the Engineering TLC program can serve as a model for other community college engineering programs, by striving to build a supportive environment, and provide guidance and encouragement throughout an engineering student's program of study.

Industrial Partners in the Education of an Engineer

ERIC Educational Resources Information Center

Smith, Barnard E.

1973-01-01

Discusses the theory, operation, and practical problems encountered in conducting a professional program which emphasizes close contact with industrial engineers in engineering education. Indicates that the partnership program provides one means for firms to participate in educational activities while serving their own interests. (CC)

How to Teach Engineering and Industrial Design: a U.K. Experience.

ERIC Educational Resources Information Center

Sheldon, D. F.

1988-01-01

Explored are the possibilities of teaching engineering through a project approach. Discussed are the introduction, clashing cultures of industrial and engineering design, skills required of a designer, teaching approach to the total design activity, CAD/CAM experiences, and conclusions. (Author/YP)

Facilitation of University Technology Transfer Through a Cooperative Service-University-Industry Program.

DTIC Science & Technology

1997-02-01

through technology transfer centers for applied engineering training and consulting, and second, in assisting and expanding university technology...both the services and industry with an applied engineering program and the training for new engineers and researchers, (2) serve as an information

A New Enhanced Engineering Programme for Manufacturing Industries.

ERIC Educational Resources Information Center

Clark, C.; And Others

1985-01-01

Special Engineering Programmes (SEPs) were established in Great Britain to attract highly able students into engineering and to provide education/training to meet the needs of manufacturing industries. SEP philosophy and objectives, program structure, student selection, course assessment, and other areas are discussed. (JN)

Industrial & Manufacturing Engineering | Classification | College of

Science.gov Websites

Engineering(414)229-6597msahmed@uwm.eduEng & Math Sciences EMS W383 profile photo Dr. Onur AsanAdjunct Assistant ProfessorIndustrial & Manufacturing Engineeringoasan@mcw.eduEng & Math Sciences profile ChandlerAdjunct InstructorIndustrial & Manufacturing Engineeringchandlec@uwm.eduEng & Math Sciences

Software Engineering Technology Infusion Within NASA

NASA Technical Reports Server (NTRS)

Zelkowitz, Marvin V.

1996-01-01

Abstract technology transfer is of crucial concern to both government and industry today. In this paper, several software engineering technologies used within NASA are studied, and the mechanisms, schedules, and efforts at transferring these technologies are investigated. The goals of this study are: 1) to understand the difference between technology transfer (the adoption of a new method by large segments of an industry) as an industry-wide phenomenon and the adoption of a new technology by an individual organization (called technology infusion); and 2) to see if software engineering technology transfer differs from other engineering disciplines. While there is great interest today in developing technology transfer models for industry, it is the technology infusion process that actually causes changes in the current state of the practice.

Establishing a `Centre for Engineering Experimentation and Design Simulation': a step towards restructuring engineering education in India

NASA Astrophysics Data System (ADS)

Venkateswarlu, P.

2017-07-01

Reforms in undergraduate engineering curriculum to produce engineers with entrepreneurial skills should address real-world problems relevant to industry and society with active industry support. Technology-assisted, hands-on projects involving experimentation, design simulation and prototyping will transform graduates into professionals with necessary skills to create and advance knowledge that meets global standards. To achieve this goal, this paper proposes establishing a central facility, 'Centre for Engineering Experimentation and Design Simulation' (CEEDS) in autonomous engineering colleges in India. The centre will be equipped with the most recent technology resources and computational facilities where students execute novel interdisciplinary product-oriented projects benefiting both industry and society. Students undertake two projects: a short-term project aimed at an engineering solution to a problem in energy, health and environment and the other a major industry-supported project devoted to a product that enhances innovation and creativity. The paper presents the current status, the theoretical and pedagogical foundation for the centre's relevance, an activity plan and its implementation in the centre for product-based learning with illustrative examples.

[Comparison Analysis of Economic and Engineering Control of Industrial VOCs].

PubMed

Wang, Yu-fei; Liu, Chang-xin; Cheng, Jie; Hao, Zheng-ping; Wang, Zheng

2015-04-01

Volatile organic compounds (VOCs) pollutant has become China's major air pollutant in key urban areas like sulfur dioxide, nitrogen oxides and particulate matter. It is mainly produced from industry sectors, and engineering control is one of the most important reduction measures. During the 12th Five-Year Plan, China decides to invest 40 billion RMB to build pollution control projects in key industry sectors with annual emission reduction of 605 000 t x a(-1). It shows that China attaches a great importance to emission reduction by engineering projects and highlights the awareness of engineering reduction technologies. In this paper, a macroeconomic model, namely computable general equilibrium model, (CGE model) was employed to simulate engineering control and economic control (imposing environmental tax). We aim to compare the pros and cons of the two reduction policies. Considering the economic loss of the whole country, the environmental tax has more impacts on the economy system than engineering reduction measures. We suggest that the central government provides 7 500 RMB x t(-1) as subsidy for enterprises in industry sectors to encourage engineering reduction.

Biomedical engineering education through global engineering teams.

PubMed

Scheffer, C; Blanckenberg, M; Garth-Davis, B; Eisenberg, M

2012-01-01

Most industrial projects require a team of engineers from a variety of disciplines. The team members are often culturally diverse and geographically dispersed. Many students do not acquire sufficient skills from typical university courses to function efficiently in such an environment. The Global Engineering Teams (GET) programme was designed to prepare students such a scenario in industry. This paper discusses five biomedical engineering themed projects completed by GET students. The benefits and success of the programme in educating students in the field of biomedical engineering are discussed.

Closing the gap in systems engineering education for the space industry

NASA Technical Reports Server (NTRS)

Carlisle, R.

1986-01-01

The education of system engineers with emphasis on designing systems for space applications is discussed. System engineers determine the functional requirements, performance needs, and implementation procedures for proposed systems and their education is based on aeronautics and mathematics. Recommendations from industry for improving the curriculum of system engineers at the undergraduate and graduate levels are provided. The assistance provided by companies to the education of system engineers is examined.

48 CFR 206.302-3 - Industrial mobilization, engineering, developmental, or research capability, or expert services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Industrial mobilization, engineering, developmental, or research capability, or expert services. 206.302-3 Section 206.302-3 Federal..., engineering, developmental, or research capability, or expert services. ...

48 CFR 206.302-3 - Industrial mobilization, engineering, developmental, or research capability, or expert services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Industrial mobilization, engineering, developmental, or research capability, or expert services. 206.302-3 Section 206.302-3 Federal..., engineering, developmental, or research capability, or expert services. ...

Facilitation of University Technology Transfer through a Cooperative Army-University-Industry Program,

DTIC Science & Technology

1995-01-01

through Army technology transfer centers for applied engineering training and consulting, and second in assisting and expanding university technology...industry with an applied engineering program and the training for new engineers and researchers, serve as an information resource for both the Army and

77 FR 16769 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-22

... Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and Test Procedures for...-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010... Industrial Equipment, which includes the commercial heating, air-conditioning, and water-heating equipment...

Detailed Statistical Tables - Graduate Science Education: Student Support and Postdoctorals, Fall 1974. Appendix III.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC. Div. of Science Resources Studies.

Reflecting enrollment as of Fall 1974, the 155 tables in this document provide extensive data on graduate and post-graduate students in all areas of science and engineering. A total of 354 institutions with 7,505 masters and doctoral level departments participated in the study. Data are organized to show the sources of support for students in the…

Hiking shared-use single-track trails: a look at hikers and hunters along the Falls Lake Trail

Treesearch

Christopher M. Snow; Roger L. Moore

2007-01-01

The Falls Lake Trail, a 26.8-mile, single-track pedestrian trail located near the Research Triangle Region of North Carolina, traverses lands managed by the United States Army Corps of Engineers; North Carolina Division of Parks and Recreation; North Carolina Division of Wildlife Resources; and Wake County Parks, Recreation and Open Space. The non-profit trail advocacy...

Technology Transfer Opportunities for the Construction Engineering Community: Materials and Diagnostics.

DTIC Science & Technology

1986-02-27

pavement testing include the use of the falling weight deflectometer and layered -elastic analysis. The falling weight deflectometer has the advantages of...being more transportable, lighter weight, and requires fewer operational personnel. The layer -elastic analysis provides for calculation of the elastic...moduli for pavement layers and sub- grade based on deflection measurements at the pavement surface. This analysis is device independent and will

The Development, Diffusion and Evaluation of a Fall Hazard Safety Training Program for Residential Construction Workers Utilizing Instructor Led and New Media Delivery

ERIC Educational Resources Information Center

Fullen, Mark D.

2009-01-01

The numbers of workers in the residential construction industry are on the rise. Falls have continually been the largest contributor to residential construction worker deaths and injuries. These workers are largely self-employed or working for small companies. These individuals are difficult to reach through traditional methods. This research…

Introduction of Sustainability Concepts into Industrial Engineering Education: A Modular Approach

ERIC Educational Resources Information Center

Nazzal, Dima; Zabinski, Joseph; Hugar, Alexander; Reinhart, Debra; Karwowski, Waldemar; Madani, Kaveh

2015-01-01

Sustainability in operations, production, and consumption continues to gain relevance for engineers. This trend will accelerate as demand for goods and services grows, straining resources and requiring ingenuity to replace boundless supply in meeting the needs of a more crowded, more prosperous world. Industrial engineers are uniquely positioned…

Engineered CRISPR/Cas9 system for multiplex genome engineering of polyploid industrial yeast strains

DOE PAGES

Lian, Jiazhang; Bao, Zehua; Hu, Sumeng; ...

2018-02-20

The CRISPR/Cas9 system has been widely used for multiplex genome engineering of Saccharomyces cerevisiae. Furthermore, its application in manipulating industrial yeast strains is less successful, probably due to the genome complexity and low copy numbers of gRNA expression plasmids. Here we developed an efficient CRISPR/Cas9 system for industrial yeast strain engineering by using our previously engineered plasmids with increased copy numbers. Four genes in both a diploid strain (Ethanol Red, 8 alleles in total) and a triploid strain (ATCC 4124, 12 alleles in total) were knocked out in a single step with 100% efficiency. This system was used to constructmore » xylose-fermenting, lactate-producing industrial yeast strains, in which ALD6, PHO13, LEU2, and URA3 were disrupted in a single step followed by the introduction of a xylose utilization pathway and a lactate biosynthetic pathway on auxotrophic marker plasmids. The optimized CRISPR/Cas9 system provides a powerful tool for the development of industrial yeast based microbial cell factories.« less

Engineered CRISPR/Cas9 system for multiplex genome engineering of polyploid industrial yeast strains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lian, Jiazhang; Bao, Zehua; Hu, Sumeng

The CRISPR/Cas9 system has been widely used for multiplex genome engineering of Saccharomyces cerevisiae. Furthermore, its application in manipulating industrial yeast strains is less successful, probably due to the genome complexity and low copy numbers of gRNA expression plasmids. Here we developed an efficient CRISPR/Cas9 system for industrial yeast strain engineering by using our previously engineered plasmids with increased copy numbers. Four genes in both a diploid strain (Ethanol Red, 8 alleles in total) and a triploid strain (ATCC 4124, 12 alleles in total) were knocked out in a single step with 100% efficiency. This system was used to constructmore » xylose-fermenting, lactate-producing industrial yeast strains, in which ALD6, PHO13, LEU2, and URA3 were disrupted in a single step followed by the introduction of a xylose utilization pathway and a lactate biosynthetic pathway on auxotrophic marker plasmids. The optimized CRISPR/Cas9 system provides a powerful tool for the development of industrial yeast based microbial cell factories.« less

Engineered CRISPR/Cas9 system for multiplex genome engineering of polyploid industrial yeast strains.

PubMed

Lian, Jiazhang; Bao, Zehua; Hu, Sumeng; Zhao, Huimin

2018-06-01

The CRISPR/Cas9 system has been widely used for multiplex genome engineering of Saccharomyces cerevisiae. However, its application in manipulating industrial yeast strains is less successful, probably due to the genome complexity and low copy numbers of gRNA expression plasmids. Here we developed an efficient CRISPR/Cas9 system for industrial yeast strain engineering by using our previously engineered plasmids with increased copy numbers. Four genes in both a diploid strain (Ethanol Red, 8 alleles in total) and a triploid strain (ATCC 4124, 12 alleles in total) were knocked out in a single step with 100% efficiency. This system was used to construct xylose-fermenting, lactate-producing industrial yeast strains, in which ALD6, PHO13, LEU2, and URA3 were disrupted in a single step followed by the introduction of a xylose utilization pathway and a lactate biosynthetic pathway on auxotrophic marker plasmids. The optimized CRISPR/Cas9 system provides a powerful tool for the development of industrial yeast based microbial cell factories. © 2018 Wiley Periodicals, Inc.

Progress in industrial holography in France

NASA Astrophysics Data System (ADS)

Smigielski, Paul

1992-01-01

Industrial applications of holography in France are briefly reviewed. Particular attention is given to nondestructive testing of helicopter blades at Aerospatiale Central Laboratory, the use of holography at Renault for car-engine vibration study, vibration characterization of turbo-jet engine components at SNECMA, and vibration analysis of plates in an industrial hemodynamic tunnel.

Engineering industrial Saccharomyces cerevisiae strains for xylose fermentation and comparison for switchgrass conversion

USDA-ARS?s Scientific Manuscript database

Saccharomyces physiology and fermentation related properties vary broadly among industrial strains. In this study, six industrial strains of varied genetic background were engineered to ferment xylose. Aerobic growth rates on xylose were 0.040 h**-1 to 0.167 h**-1. Fermentation of xylose, glucose/xy...

Incorporating Computational Chemistry into the Chemical Engineering Curriculum

ERIC Educational Resources Information Center

Wilcox, Jennifer

2006-01-01

A graduate-level computational chemistry course was designed and developed and carried out in the Department of Chemical Engineering at Worcester Polytechnic Institute in the Fall of 2005. The thrust of the course was a reaction assignment that led students through a series of steps, beginning with energetic predictions based upon fundamental…

40 CFR 1042.840 - Application requirements for remanufactured engines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the... as described in the application (including the test procedures, test parameters, and test fuels) to... other basic parameters of the engine's design and emission controls. List the fuel type on which your...

40 CFR 1042.840 - Application requirements for remanufactured engines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the... as described in the application (including the test procedures, test parameters, and test fuels) to... other basic parameters of the engine's design and emission controls. List the fuel type on which your...

40 CFR 1042.840 - Application requirements for remanufactured engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the... as described in the application (including the test procedures, test parameters, and test fuels) to... other basic parameters of the engine's design and emission controls. List the fuel type on which your...

Aircraft Survivability. Susceptibility Reduction. Fall 2010

DTIC Science & Technology

2010-01-01

limits flexibility when issues are encountered during development. Once a program enters Engineering, Manufacturing, and Development (EMD), the...using a flexible , efficient computational environment based on a credible set of components. Unfortunately, current survivability codes contain many...approach limits flexibility when issues are encountered during development. Once a program enters Engineering Manufacturing and Development (EMD), the

Research and Development in Industry: 1979. Funds, 1979. Scientists and Engineers, January 1980. Surveys of Science Resources Series. Final Report.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC.

This report analyzes data on research and development (R&D) performed by industry during 1979, examines historical trends for key R&D funding variables, and presents information on industry-employed R&D scientists and engineers. Areas addressed in the first section on R&D funds include: major R&D industries (aircraft/missiles,…

Safety in the wood products industry

Treesearch

Judd H. Michael; Janice K. Wiedenbeck; Janice K. Wiedenbeck

2004-01-01

The wood products industry has historically been considered to be one of the most dangerous for manufacturing employees. Workers are exposed to hazards ranging from falling trees to debarkers to saws to nail guns, while often working under pressures for high productivity. Compounding the danger from these hazards are the mentally and physically challenging working...

Heat transfer for falling film evaporation of industrially relevant fluids up to very high Prandtl numbers

NASA Astrophysics Data System (ADS)

Gourdon, Mathias; Karlsson, Erik; Innings, Fredrik; Jongsma, Alfred; Vamling, Lennart

2016-02-01

In many industrial applications, falling film evaporation is an attractive technique for solvent removal due to high heat transfer and low residence times. Examples are the powder production in the dairy industry and in kraft pulp production process to remove water from so called black liquor. Common for both applications is that the fluids exhibit high viscosities in industrial practice. In this paper, results from experimental studies on both black liquor and a dairy product are reported for Prandtl numbers up to 800. The results are compared with several existing correlation in literature, and the need for a modified correlation is recognized especially to cover higher Prandtl-numbers. The following correlation for the turbulent flow region with 3 < Pr < 800 was derived from the data: {Nu}t = 0.0085 \\cdot Re^{0.2} \\cdot {Pr^{0.65}} The correlation has been compared to literature data from one additional study on two other fluids (propylene glycol and cyclohexanol) with fairly high Prandtl-numbers, from 40 to 58 and from 45 to 155 respectively and the agreement was within ±40 %.

Fall Prevention in Apprentice Carpenters

PubMed Central

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Gaal, John; Fuchs, Mark; Evanoff, Bradley; Faucette, Julia; Gillen, Marion; Deych, Elena

2013-01-01

Objectives Falls from heights are a leading cause of mortality and morbidity in the construction industry, especially among inexperienced workers. We surveyed apprentice carpenters to identify individual and organizational factors associated with falls from heights. Methods We developed a 72-item fall prevention survey with multiple domains including fall experience, fall prevention knowledge, risk perceptions, confidence in ability to prevent falls, training experience, and perceptions of the safety climate and crew safety behaviors. We administered the questionnaire to apprentice carpenters in this cross-sectional study. Results Of the 1,025 respondents, 51% knew someone who had fallen from height at work and 16% had personally fallen in the past year, with ladders accounting for most of the falls. Despite participation in school-based and on-the-job training, fall prevention knowledge was poor. Ladders were perceived as low risk and ladder training was rare. Apprentices reported high levels of unsafe fall-related behaviors on their work crews. Apprentices working residential construction were more likely to fall than those working commercial construction, as were apprentices working on crews with fewer senior carpenters to provide mentorship, and those reporting more unsafe behaviors among fellow workers. Conclusions Despite participation in a formal apprenticeship program, many apprentices work at heights without adequate preparation and subsequently experience falls. Apprenticeship programs can improve the timing and content of fall prevention training. This study suggests that organizational changes in building practices, mentorship, and safety culture must also occur in order to decrease worker falls from heights. PMID:19953214

Should bioengineering graduates seek employment in the defense industry?

PubMed

Johnson, Arthur T

2014-01-01

They say that the difference between a mechanical engineer and a civil engineer is that the mechanical engineer develops weapons whereas a civil engineer designs targets. The implication is that some engineers are involved with building peaceful infrastructure whereas others contribute to destruction. This brings to mind the question: what is the proper role for engineers in the creation of weapons and defenses against them? In particular, should engineers specializing in biology or medicine be involved in the defense industry? After all, bioengineers are supposed to be builders or healers rather than warriors or destroyers.

Systems metabolic engineering in an industrial setting.

PubMed

Sagt, Cees M J

2013-03-01

Systems metabolic engineering is based on systems biology, synthetic biology, and evolutionary engineering and is now also applied in industry. Industrial use of systems metabolic engineering focuses on strain and process optimization. Since ambitious yields, titers, productivities, and low costs are key in an industrial setting, the use of effective and robust methods in systems metabolic engineering is becoming very important. Major improvements in the field of proteomics and metabolomics have been crucial in the development of genome-wide approaches in strain and process development. This is accompanied by a rapid increase in DNA sequencing and synthesis capacity. These developments enable the use of systems metabolic engineering in an industrial setting. Industrial systems metabolic engineering can be defined as the combined use of genome-wide genomics, transcriptomics, proteomics, and metabolomics to modify strains or processes. This approach has become very common since the technology for generating large data sets of all levels of the cellular processes has developed quite fast into robust, reliable, and affordable methods. The main challenge and scope of this mini review is how to translate these large data sets in relevant biological leads which can be tested for strain or process improvements. Experimental setup, heterogeneity of the culture, and sample pretreatment are important issues which are easily underrated. In addition, the process of structuring, filtering, and visualization of data is important, but also, the availability of a genetic toolbox and equipment for medium/high-throughput fermentation is a key success factor. For an efficient bioprocess, all the different components in this process have to work together. Therefore, mutual tuning of these components is an important strategy.

Protein engineering and its applications in food industry.

PubMed

Kapoor, Swati; Rafiq, Aasima; Sharma, Savita

2017-07-24

Protein engineering is a young discipline that has been branched out from the field of genetic engineering. Protein engineering is based on the available knowledge about the proteins structure/function(s), tools/instruments, software, bioinformatics database, available cloned gene, knowledge about available protein, vectors, recombinant strains and other materials that could lead to change in the protein backbone. Protein produced properly from genetic engineering process means a protein that is able to fold correctly and to do particular function(s) efficiently even after being subjected to engineering practices. Protein is modified through its gene or chemically. However, modification of protein through gene is easier. There is no specific limitation of Protein Engineering tools; any technique that can lead to change the protein constituent of amino acid and result in the modification of protein structure/function is in the frame of Protein Engineering. Meanwhile, there are some common tools used to reach a specific target. More active industrial and pharmaceutical based proteins have been invented by the field of Protein Engineering to introduce new function as well as to change its interaction with surrounding environment. A variety of protein engineering applications have been reported in the literature. These applications range from biocatalysis for food and industry to environmental, medical and nanobiotechnology applications. Successful combinations of various protein engineering methods had led to successful results in food industries and have created a scope to maintain the quality of finished product after processing.

Women in science, engineering, and math mentors pilot program

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Leary, C.T.

1994-12-31

The Women in Science, Engineering, and Math Mentors Program is a partnership program conducted by New York State Education and Research Network (NYSERNet), Rochester Institutes of Technology (RIT) and the Pittsford and Rochester City School districts. The goal of this project is to introduce high school girls to professional women from both educational and industrial scientific fields. The pilot program began in the fall of 1993 with the girls coming to RIT`s campus, via the video interactive network or in person, for a careers assessment seminar. Then they carried on {open_quotes}e-pal{close_quotes} relationships via electronic conferencing on the data network tomore » pursue many mentors and a myriad of different career avenues. The questions ranged from simple information requests regarding the requirements for a job to in-depth pursuit of emotional and personal characteristics needed for different professions. The luncheon finale brought us together on RIT`s campus to get to know each other face to face. We then toured the Micro-electronics lab and manufacturing facility at RIT. A 1993-94 school year program now involves over 140 mentors and students. We have partnered with other projects in the Rochester area to extend the sharing of the vast resources of our community.« less

In situ treatment of VOCs by recirculation technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siegrist, R.L.; Webb, O.F.; Ally, M.R.

1993-06-01

The project described herein was conducted by Oak Ridge National Laboratory (ORNL) to identify processes and technologies developed in Germany that appeared to have near-term potential for enhancing the cleanup of volatile organic compound (VOC) contaminated soil and groundwater at DOE sites. Members of the ORNL research team identified and evaluated selected German technologies developed at or in association with the University of Karlsruhe (UoK) for in situ treatment of VOC contaminated soils and groundwater. Project activities included contacts with researchers within three departments of the UoK (i.e., Applied Geology, Hydromechanics, and Soil and Foundation Engineering) during fall 1991 andmore » subsequent visits to UoK and private industry collaborators during February 1992. Subsequent analyses consisted of engineering computations, groundwater flow modeling, and treatment process modeling. As a result of these project efforts, two processes were identified as having near-term potential for DOE: (1) the vacuum vaporizer well/groundwater recirculation well and (2) the porous pipe/horizontal well. This document was prepared to summarize the methods and results of the assessment activities completed during the initial year of the project. The project is still ongoing, so not all facets of the effort are completely described in this document. Recommendations for laboratory and field experiments are provided.« less

Design and development of the Waukesha Custom Engine Control Air/Fuel Module

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moss, D.W.

1996-12-31

The Waukesha Custom Engine Control Air/Fuel Module (AFM) is designed to control the air-fuel ratio for all Waukesha carbureted, gaseous fueled, industrial engine. The AFM is programmed with a personal computer to run in one of four control modes: catalyst, best power, best economy, or lean-burn. One system can control naturally aspirated, turbocharged, in-line or vee engines. The basic system consists of an oxygen sensing system, intake manifold pressure transducer, electronic control module, actuator and exhaust thermocouple. The system permits correct operation of Waukesha engines in spite of changes in fuel pressure or temperature, engine load or speed, and fuelmore » composition. The system utilizes closed loop control and is centered about oxygen sensing technology. An innovative approach to applying oxygen sensors to industrial engines provides very good performance, greatly prolongs sensor life, and maintains sensor accuracy. Design considerations and operating results are given for application of the system to stationary, industrial engines operating on fuel gases of greatly varying composition.« less

Chemical technology for the toxic gas flow control through process water system.

PubMed

Broussard, G; Bramanti, O; Salvatore, A; Marchese, F M

2001-01-01

The aim of this work is focused on the safety and toxicological aspects due to under-pressure industrial plant management, above all in the case which the gas is very dangerous for human health and environment. Here is illustrated the safe method of control of risks through specific choices of engineering devices and chemical process: in this way we have shown the mathematical calculation regarding the case of ammonia flow gas running in the piping and plant under-pressure. In this paper the Authors show the assessment of the technological solution for falling down of a toxic gas as NH3, which lets off from safety values facilities. The under pressure industrial plants with ammonia are protected through the safety valves, settled at 20 bar pressure. The out-let gas flow is capted by a tank of a water bulk of five time theoretical water amount necessary to the complete absorption of gas. In order to prevent any health risk and carry out a safety management, it needs to verify two basic aspects, with connected specific techniques: 1. The safety valves technology through the mathematical calculation of operating device; 2. The absorption process of the toxic agent for controlling of dangerous runaway of gas.

Change sweeping South American oil sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-01-14

Change is sweeping South America's petroleum industry. In each of the continent's major oil and gas producing countries, efforts are under way to boost activity in all petroleum sectors. It is part of a wave of change involving democratization, privatization, economic reform, and pursuit of free market principles that began in earnest in South America during the 1980s. Moreover, South America's rapidly changing petroleum industry is the vanguard for similar changes likely to spread throughout Latin America and the Caribbean Sea. State oil companies are being buffeted by reform and restructuring, often clashing with government leaders, as they seek tomore » exploit a massive indigenous petroleum resource second only to the Middle East. Most of these countries look to their petroleum sectors as the engine of economic growth in the 1990s, through revenues from exports and/or reduced outlays for imports. Critical to that effort is the push to attract foreign participation in the form of capital and technology. Barriers are falling all over South America as new market oriented governments reform fiscal regimes and petroleum laws to improve their countries' attractiveness for foreign investment. At the same time, subsidies for domestic fuel prices, long the bane of state oil companies, are being selectively phased out to improve the state companies' bottom line.« less

Software Past, Present, and Future: Views from Government, Industry and Academia

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Page, Jerry; Evangelist, Michael

2000-01-01

Views from the NASA CIO NASA Software Engineering Workshop on software development from the past, present, and future are presented. The topics include: 1) Software Past; 2) Software Present; 3) NASA's Largest Software Challenges; 4) 8330 Software Projects in Industry Standish Groups 1994 Report; 5) Software Future; 6) Capability Maturity Model (CMM): Software Engineering Institute (SEI) levels; 7) System Engineering Quality Also Part of the Problem; 8) University Environment Trends Will Increase the Problem in Software Engineering; and 9) NASA Software Engineering Goals.

Labor Market Slackens for New Science and Engineering Graduates. Science Resources Studies Highlights.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC. Div. of Science Resources Studies.

Recent recruiting experiences of firms that employ scientific and engineering (S/E) personnel were determined in a followup to a 1981 survey. The following industries, which employ almost three-fourths of the scientists and engineers in private industry, were included in the survey: mining, construction, petroleum refining and extraction,…

Predictors of Effective Leadership in Industry--Should Engineering Education Focus on Traditional Intelligence, Personality, or Emotional Intelligence?

ERIC Educational Resources Information Center

Lappalainen, Pia

2015-01-01

Despite the changing global and industrial conditions requiring new approaches to leadership, management training as part of higher engineering education still remains understudied. The subsequent gap in engineering education calls for research on today's leader requirements and pedagogy supporting the inclusion of management competence in higher…

Small Engine Manufacturing in Wisconsin: Work Reorganization and Training Needs.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Center on Wisconsin Strategy.

Wisconsin is the country's leading manufacturer of small engines, and the network of companies and suppliers constituting the small engine industry accounts for more than 5% of the state's entire manufacturing base. For the past 15 years, the industry has been rocked by intensified international competition and rapid technological advancement. A…

Workplace slip, trip and fall injuries and obesity.

PubMed

Koepp, Gabriel A; Snedden, Bradley J; Levine, James A

2015-01-01

The objective of this study was to examine the relationship between slip, trip and fall injuries and obesity in a population of workers at the Idaho National Laboratory (INL) in Idaho Falls, Idaho. INL is an applied engineering facility dedicated to supporting the US Department of Energy's mission. An analysis was performed on injuries reported to the INL Medical Clinic to determine whether obesity was related to an increase in slip, trip and fall injuries. Records were analysed that spanned a 6-year period (2005-2010), and included 8581 employees (mean age, 47 ± 11 years and body mass index [BMI], 29 ± 5 kg/m(2); 34% obesity rate). Of the 189 people who reported slip, trip and fall injuries (mean age, 48 ± 11 years), 51% were obese (P < 0.001 compared with uninjured employees), and their mean BMI was 31 ± 6 kg/m(2) (P < 0.001). Obesity in this population was associated with a greater rate of slip, trip and fall injuries.

Utilization of and Demand for Engineers and Scientists in Industrial Research.

ERIC Educational Resources Information Center

Alden, John D.

A survey of the employment and demand for scientists and engineers in industrial research laboratories was made among all companies belonging to the Industrial Research Institute and a number of other organizations early in 1972. A questionnaire was used to analyze such aspects as reliability of future estimates, employment trends, personnel…

An industrial engineering approach to laboratory automation for high throughput screening

PubMed Central

Menke, Karl C.

2000-01-01

Across the pharmaceutical industry, there are a variety of approaches to laboratory automation for high throughput screening. At Sphinx Pharmaceuticals, the principles of industrial engineering have been applied to systematically identify and develop those automated solutions that provide the greatest value to the scientists engaged in lead generation. PMID:18924701

Murjottelu-Interdisciplinary Training Campaign for Industrial Design and Engineering Students

ERIC Educational Resources Information Center

Itkonen, Maija; Ekman, Kalevi Edvard; Kojo, Inka

2009-01-01

Today's growing business competition demands that design and technology must be seamlessly integrated. Designers should be employed increasingly as in-house in the industry, in addition to entrepreneurship and consultancy employment. How to realise this aim? Industry training is a tradition in engineering studies, but that is rarely the case in…

Technology Education; Engineering Technology and Industrial Technology in California Community Colleges: A Curriculum Guide.

ERIC Educational Resources Information Center

Schon, James F.

In order to identify the distinguishing characteristics of technical education programs in engineering and industrial technology currently offered by post-secondary institutions in California, a body of data was collected by visiting 25 community colleges, 5 state universities, and 8 industrial firms; by a questionnaire sampling of 72 California…

The Importance of Industrial Ecology in Engineering Education for Sustainable Development

ERIC Educational Resources Information Center

Biswas, Wahidul K.

2012-01-01

Purpose: The purpose of this paper is to show how industrial ecology can facilitate the achievement of sustainable development through its incorporation into an engineering curriculum. Design/methodology/approach: A model has been developed for assessing sustainability learning outcomes due to the incorporation of the concept of industrial ecology…

Industrial Engineering Lifts Off at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Barth, Tim

1998-01-01

When the National Aeronautics and Space Administration (NASA) began the Space Shuttle Program, it did not have an established industrial engineering (IE) capability for several probable reasons. For example, it was easy for some managers to dismiss IE principles as being inapplicable at NASA's John F. Kennedy Space Center (KSC). When NASA was formed by the National Aeronautics and Space Act of 1958, most industrial engineers worked in more traditional factory environments. The primary emphasis early in the shuttle program, and during previous human space flight programs such as Mercury and Apollo, was on technical accomplishments. Industrial engineering is sometimes difficult to explain in NASA's highly technical culture. IE is different in many ways from other engineering disciplines because it is devoted to process management and improvement, rather than product design. Images of clipboards and stopwatches still come to the minds of many people when the term industrial engineering is mentioned. The discipline of IE has only recently begun to gain acceptance and understanding in NASA. From an IE perspective today, the facilities used for flight hardware processing at KSC are NASA's premier factories. The products of these factories are among the most spectacular in the world: safe and successful launches of shuttles and expendable vehicles that carry tremendous payloads into space.

Developing an industry-oriented safety curriculum using the Delphi technique.

PubMed

Chen, Der-Fa; Wu, Tsung-Chih; Chen, Chi-Hsiang; Chang, Shu-Hsuan; Yao, Kai-Chao; Liao, Chin-Wen

2016-09-01

In this study, we examined the development of industry-oriented safety degree curricula at a college level. Based on a review of literature on the practices and study of the development of safety curricula, we classified occupational safety and health curricula into the following three domains: safety engineering, health engineering, and safety and health management. We invited 44 safety professionals to complete a four-round survey that was designed using a modified Delphi technique. We used Chi-square statistics to test the panel experts' consensus on the significance of the items in the three domains and employed descriptive statistics to rank the participants' rating of each item. The results showed that the top three items for each of the three domains were Risk Assessment, Dangerous Machinery and Equipment, and Fire and Explosion Prevention for safety engineering; Ergonomics, Industrial Toxicology, and Health Risk Assessment for health engineering; and Industrial Safety and Health Regulations, Accident Investigation and Analysis, and Emergency Response for safety and health management. Only graduates from safety programmes who possess practical industry-oriented abilities can satisfy industry demands and provide value to the existence of college safety programmes.

A Recommended Framework for the Network-Centric Acquisition Process

DTIC Science & Technology

2009-09-01

ISO /IEC 12207 , Systems and Software Engineering-Software Life-Cycle Processes  ANSI/EIA 632, Processes for Engineering a System. There are...engineering [46]. Some of the process models presented in the DAG are:  ISO /IEC 15288, Systems and Software Engineering-System Life-Cycle Processes...e.g., ISO , IA, Security, etc.). Vetting developers helps ensure that they are using industry best industry practices and maximize the IA compliance

Industrial biosystems engineering and biorefinery systems.

PubMed

Chen, Shulin

2008-06-01

The concept of Industrial Biosystems Engineering (IBsE) was suggested as a new engineering branch to be developed for meeting the needs for science, technology and professionals by the upcoming bioeconomy. With emphasis on systems, IBsE builds upon the interfaces between systems biology, bioprocessing, and systems engineering. This paper discussed the background, the suggested definition, the theoretical framework and methodologies of this new discipline as well as its challenges and future development.

Falls risk and hospitalization among retired workers with occupational noise-induced hearing loss.

PubMed

Girard, Serge André; Leroux, Tony; Verreault, René; Courteau, Marilène; Picard, Michel; Turcotte, Fernand; Baril, Julie

2014-03-01

This study sought to ascertain whether occupational noise-induced hearing loss (NIHL) increased the risk of falls requiring hospitalization among retired workers. The study population consisted of males (age ≥ 65) with an average occupational noise exposure of 30.6 years and whose mean bilateral hearing loss was 42.2 dB HL at 3, 4, and 6 kHz. Seventy-two retired workers admitted to hospitals after a fall were matched with 216 controls from the same industrial sectors. Conditional logistic regression models were used to estimate the risk (odds ratio; [OR]) of falls leading to hospitalization by NIHL categories. Results showed a relationship between severe NIHL (≥ 52.5 dB HL) and the occurrence of a fall (OR: 1.97, CI95%: 1.001-3.876). Reducing falls among seniors fosters the maintenance of their autonomy. There is a definite need to acquire knowledge about harmful effects of occupational noise to support the prevention of NIHL and ensure healthier workplaces.

Geohazard reconnaissance mapping for potential rock boulder fall using low altitude UAV photogrammetry

NASA Astrophysics Data System (ADS)

Sharan Kumar, N.; Ashraf Mohamad Ismail, Mohd; Sukor, Nur Sabahiah Abdul; Cheang, William

2018-05-01

This paper discusses potential applications of unmanned aerial vehicles (UAVs) for evaluation of risk immediately with photos and 3-dimensional digital element. Aerial photography using UAV ready to give a powerful technique for potential rock boulder fall recognition. High-resolution outputs from this method give the chance to evaluate the site for potential rock boulder falls spatially. The utilization of UAV to capture the aerial photos is a quick, reliable, and cost-effective technique contrasted with terrestrial laser scanning method. Reconnaissance of potential rock boulder susceptible to fall is very crucial during the geotechnical investigation. This process is essential in the view of the rock fall hazards nearby site before the beginning of any preliminary work. Photogrammetric applications have empowered the automated way to deal with identification of rock boulder susceptible to fall by recognizing the location, size, and position. A developing examination of the utilization of digital photogrammetry gives numerous many benefits for civil engineering application. These advancements have made important contributions to our capabilities to create the geohazard map on potential rock boulder fall.

[Assessment and training of strength and balance for fall prevention in the elderly: recommendations of an interdisciplinary expert panel].

PubMed

Granacher, U; Muehlbauer, T; Gschwind, Y J; Pfenninger, B; Kressig, R W

2014-08-01

The proportion of elderly people in societies of western industrialized countries is continuously rising. Biologic aging induces deficits in balance and muscle strength/power in old age, which is responsible for an increased prevalence of falls. Therefore, nationwide and easy-to-administer fall prevention programs have to be developed in order to contribute to the autonomy and quality of life in old age and to help reduce the financial burden on the public health care system due to the treatment of fall-related injuries. This narrative (qualitative) literature review deals with a) the reasons for an increased prevalence of falls in old age, b) important clinical tests for fall-risk assessment, and c) evidence-based intervention/training programs for fall prevention in old age. The findings of this literature review are based on a cost-free practice guide that is available to the public (via the internet) and that was created by an expert panel (i.e., geriatricians, exercise scientists, physiotherapists, geriatric therapists). The present review provides the scientific foundation of the practice guide.

Falls among union carpenters.

PubMed

Lipscomb, Hester J; Li, Leiming; Dement, John M

2003-08-01

Falls are a leading cause of morbidity and mortality in the construction trades. We identified a cohort of 16,215 active union carpenters, hours worked, and their workers' compensation claims for a 10-year period. The data on this well-defined cohort were used to describe their work-related falls; to define rates of injury and the associated costs; and to identify high-risk groups. Same level falls occurred at a rate of 1.8/200,000 hours worked; falls from elevations at a rate of 2.3/200,000 hours worked. These injuries resulted in direct payments of 0.30 dollars per hour of work or 2.40 dollars per 8-hr day. Mean costs per fall increased with increasing age. Age was not associated with risk of falls from elevations; younger carpenters had modestly reduced rates of falls from the same level. Rates of falls decreased with increasing time in the union. Carpenters whose usual work involved drywall installation or residential work were at highest risk. Falls are a significant public health risk for carpenters and they are responsible for a significant burden of work-related injury costs. While there is a need for prevention of falls from elevations--through training, enforcement of fall protection regulations, improved safety climate, or engineering changes--there is also the need to prevent falls from lower elevations. Differences in risk likely reflect varying exposures and safety practices in different areas of carpentry, as well as training, experience, and job assignments based on longevity in the union. Copyright 2003 Wiley-Liss, Inc.

The inescapable smart impact detection system (ISIS): An ubiquitous and personalized fall detector based on a distributed 'divide and conquer strategy'.

PubMed

Prado-Velasco, Manuel; del Rio-Cidoncha, Maria Gloria; Ortiz-Marin, Rafael

2008-01-01

Despite the intense research in the last decade with the aim of developing a reliable solution for fall detection in the elderly and other risk populations, it can be asserted that the diffusion of fall detectors in the geriatric practice is near null. This scenario is similar to the very scarce use of telemedicine in healthcare. The present work begins analyzing why fall detectors have not achieved to permeate the industry. That road is used to know the drawbacks of current devices and systems, besides to allow studying several important concepts underlying the principles of fall detection. A novel smart detection system based on that survey is finally briefly presented. The design of this device is founded on the experience and results obtained by an earlier device that was designed in the framework of the thesis of one of the authors.

Industrial Engineering Tool Use in Quality Improvement Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodin, Wayne; Beruvides, Mario

This paper presents the results of an examination of industrial engineering tool use in Six Sigma projects for a contractor providing specialty manufacturing and service activities for a United States federal government agency.

46 CFR 58.60-11 - Analyses, plans, diagrams and specifications: Submission.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile...) Each industrial system must be analyzed by a registered professional engineer to certify that the...

46 CFR 58.60-11 - Analyses, plans, diagrams and specifications: Submission.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile...) Each industrial system must be analyzed by a registered professional engineer to certify that the...

46 CFR 58.60-11 - Analyses, plans, diagrams and specifications: Submission.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile...) Each industrial system must be analyzed by a registered professional engineer to certify that the...

46 CFR 58.60-11 - Analyses, plans, diagrams and specifications: Submission.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile...) Each industrial system must be analyzed by a registered professional engineer to certify that the...

46 CFR 58.60-11 - Analyses, plans, diagrams and specifications: Submission.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile...) Each industrial system must be analyzed by a registered professional engineer to certify that the...

Brief 76 Nuclear Engineering Enrollments and Degrees Survey, 2015 Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2015 Nuclear Engineering Enrollments and Degrees Survey reports degrees granted between September 1, 2014 and August 31, 2015. Enrollment information refers to the fall term 2015. The enrollments and degrees data comprises students majoring in nuclear engineering or in an option program equivalent to a major. Thirty-five academic programs reported having nuclear engineering programs during 2015, and data was received from all thirty-five programs. The report includes enrollment information on undergraduate students and graduate students and information by degree level for post-graduation plans.

Brief 74 Nuclear Engineering Enrollments and Degrees Survey, 2014 Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2015-03-15

The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014, and enrollments for fall 2014. There are three academic programs new to this year's survey. Thirty-five academic programs reported having nuclear engineering programs during 2014, and data were provided by all thirty-five. The enrollments and degrees data include students majoring in nuclear engineering or in an option program equivalent to a major. Two nuclear engineering programs have indicated that health physics option enrollments and degrees are also reported in the health physics enrollments and degrees survey.

40 CFR 1048.205 - What must I include in my application?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (AECDs) and all fuel-system components you will install on any production or test engine. Identify the... fuel types on which your engines are designed to operate (for example, gasoline and natural gas). List... maintenance you did. (g) List the specifications of each test fuel to show that it falls within the required...

40 CFR 1048.205 - What must I include in my application?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (AECDs) and all fuel-system components you will install on any production or test engine. Identify the... fuel types on which your engines are designed to operate (for example, gasoline and natural gas). List... maintenance you did. (g) List the specifications of each test fuel to show that it falls within the required...

Safety in Construction Using Virtual Reality (SAVR): A Model for Labor Safety. Working Paper Series WP-022.

ERIC Educational Resources Information Center

Hadipriono, Fabian C.; And Others

An interactive training model called SAVR (Safety in Construction Using Virtual Reality) was developed to train construction students, novice engineers, and construction workers to prevent falls from scaffolding. The model was implemented in a graphics supercomputer, the ONYX Reality Engine2. The SAVR model provides trainees with an immersive,…

Supporting Habitat Management for bird conservation planning on Fort Belvoir, Virginia

Treesearch

Richard A. Fischer; Chris Eberly; Dorothy Keough

2005-01-01

The U.S. Army Corps of Engineers, Engineer Research and Development Center (ERDC), Environmental Laboratory has conducted seasonal avian surveys (winter, spring, summer, fall) from Spring 1998 through Summer 2002 at approximately 127 permanent point-count locations on Fort Belvoir, VA. This work has resulted in a data-rich baseline understanding of the distribution and...

Commercial Use of Space: a New Economic Strength for America

NASA Technical Reports Server (NTRS)

1989-01-01

Space commerce is composed of diverse activities which fall into four broad areas: satellite communications, earth and ocean observations, materials research and processing, and space transportation and industrial services. Space has become an industrial laboratory for materials research and processing. NASA's role in the commercial use of space is discussed through its commercial development program.

Irregular Workers and the Vocational Education and Training: Centered on the Laborer in the Manufacturing Industry.

ERIC Educational Resources Information Center

Chang, Hong-geun

A study examined irregular workers and vocational education and training (VET) centered on laborers in the Korea's manufacturing industry. The study established that, despite the increasing number of irregular workers in Korea, existing VET programs for them fall far short of those for regular workers. Compared with regular workers, irregular…

Advances in protease engineering for laundry detergents.

PubMed

Vojcic, Ljubica; Pitzler, Christian; Körfer, Georgette; Jakob, Felix; Ronny Martinez; Maurer, Karl-Heinz; Schwaneberg, Ulrich

2015-12-25

Proteases are essential ingredients in modern laundry detergents. Over the past 30 years, subtilisin proteases employed in the laundry detergent industry have been engineered by directed evolution and rational design to tailor their properties towards industrial demands. This comprehensive review discusses recent success stories in subtilisin protease engineering. Advances in protease engineering for laundry detergents comprise simultaneous improvement of thermal resistance and activity at low temperatures, a rational strategy to modulate pH profiles, and a general hypothesis for how to increase promiscuous activity towards the production of peroxycarboxylic acids as mild bleaching agents. The three protease engineering campaigns presented provide in-depth analysis of protease properties and have identified principles that can be applied to improve or generate enzyme variants for industrial applications beyond laundry detergents. Copyright © 2015 Elsevier B.V. All rights reserved.

Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals.

PubMed

Jullesson, David; David, Florian; Pfleger, Brian; Nielsen, Jens

2015-11-15

Industrial bio-processes for fine chemical production are increasingly relying on cell factories developed through metabolic engineering and synthetic biology. The use of high throughput techniques and automation for the design of cell factories, and especially platform strains, has played an important role in the transition from laboratory research to industrial production. Model organisms such as Saccharomyces cerevisiae and Escherichia coli remain widely used host strains for industrial production due to their robust and desirable traits. This review describes some of the bio-based fine chemicals that have reached the market, key metabolic engineering tools that have allowed this to happen and some of the companies that are currently utilizing these technologies for developing industrial production processes. Copyright © 2015 Elsevier Inc. All rights reserved.

A Buddhist perspective on industrial engineering and the design of work.

PubMed

Lee, Wei-Tau; Blumenthal, James A; Funk, Kenneth H

2014-06-01

The modern way of life is highly dependent upon the production of goods by industrial organizations that are in turn dependent upon their workers for their ongoing operations. Even though more than a century has passed since the dawn of the industrial revolution, many dangerous aspects of work, both physical and mental, remain in the workplace today. Using Buddhist philosophical principles, this paper suggests that although many sources of the problem reside within the larger society, the industrial engineer is still a key factor in bettering work and providing a workplace suitable for their fellow workers. Drawing on these insights, we present a number of work design guidelines that industrial engineers who abide by Buddhist principles could practice to help overcome some of the many sufferings produced by modern work.

Metabolic Engineering VII Conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevin Korpics

The aims of this Metabolic Engineering conference are to provide a forum for academic and industrial researchers in the field; to bring together the different scientific disciplines that contribute to the design, analysis and optimization of metabolic pathways; and to explore the role of Metabolic Engineering in the areas of health and sustainability. Presentations, both written and oral, panel discussions, and workshops will focus on both applications and techniques used for pathway engineering. Various applications including bioenergy, industrial chemicals and materials, drug targets, health, agriculture, and nutrition will be discussed. Workshops focused on technology development for mathematical and experimental techniquesmore » important for metabolic engineering applications will be held for more in depth discussion. This 2008 meeting will celebrate our conference tradition of high quality and relevance to both industrial and academic participants, with topics ranging from the frontiers of fundamental science to the practical aspects of metabolic engineering.« less

Protein design in systems metabolic engineering for industrial strain development.

PubMed

Chen, Zhen; Zeng, An-Ping

2013-05-01

Accelerating the process of industrial bacterial host strain development, aimed at increasing productivity, generating new bio-products or utilizing alternative feedstocks, requires the integration of complementary approaches to manipulate cellular metabolism and regulatory networks. Systems metabolic engineering extends the concept of classical metabolic engineering to the systems level by incorporating the techniques used in systems biology and synthetic biology, and offers a framework for the development of the next generation of industrial strains. As one of the most useful tools of systems metabolic engineering, protein design allows us to design and optimize cellular metabolism at a molecular level. Here, we review the current strategies of protein design for engineering cellular synthetic pathways, metabolic control systems and signaling pathways, and highlight the challenges of this subfield within the context of systems metabolic engineering. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Engineering Philosophy: Theories of Technology, German Idealism, and Social Order in High-Industrial Germany.

PubMed

Voskuhl, Adelheid

During the so-called "Second Industrial Revolution," engineers were constituting themselves as a new social and professional group, and found themselves in often fierce competition with existing elites-the military, the nobility, and educated bourgeois mandarins-whose roots went back to medieval and early modern pre-industrial social orders. During that same time, engineers also discovered the discipline of philosophy: as a means to express their intellectual and social agendas, and to theorize technology and its relationship to art, history, culture, philosophy, and the state. This article analyzes engineers' own philosophical writings about technology as well as the institutions in which they composed them in 1910s and 1920s Germany. It emphasizes engineers' contributions to well-known discourses founded by canonical philosophers, the role of preindustrial economies and their imagination in such philosophies, and the role of both the history and the philosophy of technology in engineers' desire for upward social mobility.

Implementation of partnership management model of SMK (Vocational High School) with existing industries in mechanical engineering expertise in Central Java

NASA Astrophysics Data System (ADS)

Sumbodo, Wirawan; Pardjono, Samsudi, Rahadjo, Winarno Dwi

2018-03-01

This study aims to determine the existing conditions of implementation of partnership management model of SMK with the industry on the mechanical engineering expertise in Central Java. The method used is descriptive analysis. The research result shows that the implementation of partnership management model of SMK based on new existing industry produces ready graduates of 62.5% which belongs to low category, although the partnership program of SMK with the industry is done well with the average score of 3.17. As many as 37.5% of SMK graduates of Mechanical Engineering Expertise Program choose to continue their studies or to be an entrepreneur. It is expected that the partnership model of SMK with the industry can be developed into a reference for government policy in developing SMK that is able to produce graduates who are ready to work according to the needs of partner industry.

[Fermentation production of microbial catalase and its application in textile industry].

PubMed

Zhang, Dongxu; Du, Guocheng; Chen, Jian

2010-11-01

Microbial catalase is an important industrial enzyme that catalyzes the decomposition of hydrogen peroxide to water and oxygen. This enzyme has great potential of application in food, textile and pharmaceutical industries. The production of microbial catalase has been significantly improved thanks to advances in bioprocess engineering and genetic engineering. In this paper, we review the progresses in fermentation production of microbial catalase and its application in textile industry. Among these progresses, we will highlight strain isolation, substrate and environment optimization, enzyme induction, construction of engineering strains and application process optimization. Meanwhile, we also address future research trends for microbial catalase production and its application in textile industry. Molecular modification (site-directed mutagenesis and directed revolution) will endue catalase with high pH and temperature stabilities. Improvement of catalase production, based on the understanding of induction mechanism and the process control of recombinant stain fermentation, will further accelerate the application of catalase in textile industry.

The U.S. Army Corps of Engineers (USACE) in Stability Operations

DTIC Science & Technology

2008-12-12

advance (FEST-A) or forward engineer support team-main (FEST- M ) is another vital asset that USACE can provide in stability operations. The FEST- M ...engineer units and if deployed with a FEST- M will fall under that element. FEST are small teams with specialized expertise based on where they are...in Afghanistan and set the conditions for the creation of an Afghan political system ( Donini et al., 46). Major reconstruction projects were not

Air Force Academy Aeronautics Digest - Fall/Winter 1981.

DTIC Science & Technology

1982-06-01

After all, some guy just peddled across the English Channel?!" In reply wo cite Professor E.S. Taylor , who, in a wonderfully readable article (Ref...to the cadet wing, Spring, 1976. 2. Taylor , Edward S., "Evolution of the Jet Engine," Astronautics and Aeronautics, November 1970, pps. 64-72. 3...heat pump, air conditioner, or refrigerator. The Brayton cycle is the cycle that is used by a turbojet or turbofan engine. We have some fine engine test

Steam Plant at the Aircraft Engine Research Laboratory

NASA Image and Video Library

1945-09-21

The Steam Plant at the National Advisory Committee for Aeronautics (NACA) Aircraft Engine Research Laboratory supplies steam to the major test facilities and office buildings. Steam is used for the Icing Research Tunnel's spray system and the Engine Research Building’s desiccant air dryers. In addition, its five boilers supply heat to various buildings and the cafeteria. Schirmer-Schneider Company built the $141,000 facility in the fall of 1942, and it has been in operation ever since.

Manpower Requirements Report for FY 1982

DTIC Science & Technology

1981-02-01

Specifically included are program elements for industrial preparedness, second destination transportation, property disposal, production engineering ...artillery, and combat - engineers . Army policy accepts the fact that women will serve in loca- .. tions throughout the battlefield, will be expected to... industrial engineering work measurement techniques and computerized models such as the Logistics Composite Model (LCOM). MEP policy emanates from the

Research on Building Education & Workforce Capacity in Systems Engineering

DTIC Science & Technology

2012-09-30

Science Coast Guard Academy Chris Lund, Research Engineer USCG R&D center Civil Engineering Coast Guard Academy Scot T. Tripp, Program Manager USCG...74 researchers Coast Guard Academy Scot T. Tripp, Program Manager Internal institutional USCG R&D center... Woods Industry Lockheed Martin Aeronautics Company Defense contracted system development and analysis Stevens Tom Newby Industry Buro

Assessing the Higher National Diploma Chemical Engineering Programme in Ghana: Students' Perspective

ERIC Educational Resources Information Center

Boateng, Cyril D.; Bensah, Edem Cudjoe; Ahiekpor, Julius C.

2012-01-01

Chemical engineers have played key roles in the growth of the chemical and allied industries in Ghana but indigenous industries that have traditionally been the domain of the informal sector need to be migrated to the formal sector through the entrepreneurship and innovation of chemical engineers. The Higher National Diploma Chemical Engineering…

Polytechnic Engineering Mathematics: Assessing Its Relevance to the Productivity of Industries in Uganda

ERIC Educational Resources Information Center

Jehopio, Peter J.; Wesonga, Ronald

2017-01-01

Background: The main objective of the study was to examine the relevance of engineering mathematics to the emerging industries. The level of abstraction, the standard of rigor, and the depth of theoretical treatment are necessary skills expected of a graduate engineering technician to be derived from mathematical knowledge. The question of whether…

Is Chinese Software Engineering Professionalizing or Not?: Specialization of Knowledge, Subjective Identification and Professionalization

ERIC Educational Resources Information Center

Yang, Yan

2012-01-01

Purpose: This paper aims to discuss the challenge for the classical idea of professionalism in understanding the Chinese software engineering industry after giving a close insight into the development of this industry as well as individual engineers with a psycho-societal perspective. Design/methodology/approach: The study starts with the general…

Support for Different Roles in Software Engineering Master's Thesis Projects

ERIC Educational Resources Information Center

Host, M.; Feldt, R.; Luders, F.

2010-01-01

Like many engineering programs in Europe, the final part of most Swedish software engineering programs is a longer project in which the students write a Master's thesis. These projects are often conducted in cooperation between a university and industry, and the students often have two supervisors, one at the university and one in industry. In…

Engineering in Scotland's Colleges: A Report by HM Inspectors for the Scottish Funding Council

ERIC Educational Resources Information Center

Her Majesty's Inspectorate of Education, 2007

2007-01-01

Engineering has played an important role in Scotland's industrial history. Over the years, the skills requirements of industry have changed as the technology has progressed and the industrial base of the country has developed. Over the past decade, there have been substantial changes in the employment opportunities for people with engineering…

A Spiral Step-by-Step Educational Method for Cultivating Competent Embedded System Engineers to Meet Industry Demands

ERIC Educational Resources Information Center

Jing,Lei; Cheng, Zixue; Wang, Junbo; Zhou, Yinghui

2011-01-01

Embedded system technologies are undergoing dramatic change. Competent embedded system engineers are becoming a scarce resource in the industry. Given this, universities should revise their specialist education to meet industry demands. In this paper, a spirally tight-coupled step-by-step educational method, based on an analysis of industry…

Developing Design and Management Skills for Senior Industrial Engineering Students

ERIC Educational Resources Information Center

Urbanic, R. J.

2011-01-01

In Canadian engineering institutions, a significant design experience must occur in the final year of study. In the Department of Industrial and Manufacturing Systems at the University of Windsor, unsolved, open ended projects sponsored by industrial partners from a variety of sectors are provided to the student teams in order for them to apply…

Library Service to Industry at USC: The Industrial Associates of the School of Engineering.

ERIC Educational Resources Information Center

Frohmberg, Katherine A.

Special libraries in Southern California and the San Francisco Bay Area who were members of the University of Southern California (USC) School of Engineering Industrial Associate program were surveyed on their use of the USC program and other similar programs. The questionnaire was designed to discover the attitudes and needs of the Industrial…

A STUDY ON THE APPLICATION OF VALUE ENGINEERING TO THE CONSTRUCTION INDUSTRY

NASA Astrophysics Data System (ADS)

Kemmochi, Sampei; Koizumi, Atsushi

Value Engineering (VE), one of the effective management techniques to provide products and services, is focused as a measure to reduce the cost on public works, but its effectiveness as a management technique doesn't seem to be fully understood in the construction industry. This paper demonstrates aspects and issues of VE in construction industry by comparing with manufacturing industry, and to combat these, VE which is implemented in construction industry must be succinct and proposes methods to conduct it from the viewpoint of construction industry. At last, the place to go to for construction industry down the road regarding the VE adaptation is clarified.

Technician Career Opportunities in Engineering Technology.

ERIC Educational Resources Information Center

Engineers' Council for Professional Development, New York, NY.

Career opportunities for engineering technicians are available in the technologies relating to air conditioning, heating, and refrigeration, aviation and aerospace, building construction, chemical engineering, civil engineering, electrical engineering, electronics, industrial engineering, instrumentation, internal combustion engines, mechanical…

Engineering Technology Education: Bibliography, 1988.

ERIC Educational Resources Information Center

Dyrud, Marilyn A.

1989-01-01

Lists articles and books related to engineering technology education published in 1988. Items are grouped administration, aeronautical, architectural, CAD/CAM, civil, computers, curriculum, electrical/electronics, industrial, industry/government/employers, instructional technology, laboratories, lasers, liberal studies, manufacturing, mechanical,…

46 CFR 11.530 - Endorsements for engineers of uninspected fishing industry vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... applies to endorsements for chief and assistant engineers of all vessels, however propelled, navigating the high seas, which are documented to engage in the fishing industry, with the exception of: (1...

5. Looking west upstream, towards the location of the erstwhile ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Looking west upstream, towards the location of the erstwhile intake flume into canal from the upper reaches of the Potomac River above the Great Falls, on the old Potowmack Canal built by George Washington. The plan contemplated canal navigation around the Great Falls of the Potomac River, located on the Virginia side of the Potomac, about 15 miles above Washington, D.C. The Company was organized in 1785, and by 1802, this and three or four smaller canals were substantially completed and raft-like boats began operation with materials from the west to the city of Georgetown. 'Although the canals and locks of the Potomac Canal were considered a great engineering accomplishment, the improvements to the river channel were inadequate. Disappointment ... - Potowmack Company: Great Falls Canal & Locks, Great Falls, Fairfax County, VA

Predicting performance in a first engineering calculus course: implications for interventions

NASA Astrophysics Data System (ADS)

Hieb, Jeffrey L.; Lyle, Keith B.; Ralston, Patricia A. S.; Chariker, Julia

2015-01-01

At the University of Louisville, a large, urban institution in the south-east United States, undergraduate engineering students take their mathematics courses from the school of engineering. In the fall of their freshman year, engineering students take Engineering Analysis I, a calculus-based engineering analysis course. After the first two weeks of the semester, many students end up leaving Engineering Analysis I and moving to a mathematics intervention course. In an effort to retain more students in Engineering Analysis I, the department collaborated with university academic support services to create a summer intervention programme. Students were targeted for the summer programme based on their score on an algebra readiness exam (ARE). In a previous study, the ARE scores were found to be a significant predictor of retention and performance in Engineering Analysis I. This study continues that work, analysing data from students who entered the engineering school in the fall of 2012. The predictive validity of the ARE was verified, and a hierarchical linear regression model was created using math American College Testing (ACT) scores, ARE scores, summer intervention participation, and several metacognitive and motivational factors as measured by subscales of the Motivated Strategies for Learning Questionnaire. In the regression model, ARE score explained an additional 5.1% of the variation in exam performance in Engineering Analysis I beyond math ACT score. Students took the ARE before and after the summer interventions and scores were significantly higher following the intervention. However, intervention participants nonetheless had lower exam scores in Engineering Analysis I. The following factors related to motivation and learning strategies were found to significantly predict exam scores in Engineering Analysis I: time and study environment management, internal goal orientation, and test anxiety. The adjusted R2 for the full model was 0.42, meaning that the model could explain 42% of the variation in Engineering Analysis I exam scores.

["Two professions for a single task". The introduction of chemical engineering in Spain during the first Francoism].

PubMed

Toca, Angel

2006-01-01

Through the first half of the 20th century, chemical engineering was established as an academic option in the training of specialists for the North-American and European chemical industry, whereas it was not a special field of study in Spain until the 1990s. The reason for this delay was a battle of interests between chemist and industrial engineers to control this career during the first Francoism. This article will try to show the development and professionalization of specialists for the Spanish chemical industry.

Utilization of the Seniors Falls Investigation Methodology to identify system-wide causes of falls in community-dwelling seniors.

PubMed

Zecevic, Aleksandra A; Salmoni, Alan W; Lewko, John H; Vandervoort, Anthoney A; Speechley, Mark

2009-10-01

As a highly heterogeneous group, seniors live in complex environments influenced by multiple physical and social structures that affect their safety. Until now, the major approach to falls research has been person centered. However, in industrial settings, the individuals involved in an accident are seen as the inheritors of system defects. The objective of the present study was to investigate safety deficiencies that contributed to falls in community-dwelling seniors using a systems approach. The investigations were conducted using the Seniors Falls Investigation Methodology (SFIM), an adapted version of a method used to examine transportation accidents, such as airplane crashes. Fifteen seniors, who experienced a fall or near fall, participated in multiple case studies. A cross-case synthesis was used to summarize findings and identify common patterns of causes and safety deficiencies. Falls and near falls are a result of latent unsafe conditions, and unsafe acts and decisions combined in a diverse set of circumstances. If not identified and removed, these unsafe conditions can cause falls for other seniors. This study provided compelling evidence that causes of falling are systemic and develop over time. It demonstrated that the systems approach is needed to expand the focus from the individual to multilayered organizational and supervisory causes. The SFIM demonstrated capability to identify causes of falls that will allow better prevention and management programs, hence advancing seniors' safety. SFIM shows great potential for implementation in organized settings, such as hospitals and long-term care homes.

Process improvement by cycle time reduction through Lean Methodology

NASA Astrophysics Data System (ADS)

Siva, R.; patan, Mahamed naveed khan; lakshmi pavan kumar, Mane; Purusothaman, M.; pitchai, S. Antony; Jegathish, Y.

2017-05-01

In present world, every customer needs their products to get on time with good quality. Presently every industry is striving to satisfy their customer requirements. An aviation concern trying to accomplish continuous improvement in all its projects. In this project the maintenance service for the customer is analyzed. The maintenance part service is split up into four levels. Out of it, three levels are done in service shops and the fourth level falls under customer’s privilege to change the parts in their aircraft engines at their location. An enhancement for electronics initial provisioning (eIP) is done for fourth level. Customers request service shops to get their requirements through Recommended Spare Parts List (RSPL) by eIP. To complete this RSPL for one customer, it takes 61.5 hours as a cycle time which is very high. By mapping current state VSM and takt time, future state improvement can be done in order to reduce cycle time using Lean tools such as Poke-Yoke, Jidoka, 5S, Muda etc.,

Statistical mechanics of complex economies

NASA Astrophysics Data System (ADS)

Bardoscia, Marco; Livan, Giacomo; Marsili, Matteo

2017-04-01

In the pursuit of ever increasing efficiency and growth, our economies have evolved to remarkable degrees of complexity, with nested production processes feeding each other in order to create products of greater sophistication from less sophisticated ones, down to raw materials. The engine of such an expansion have been competitive markets that, according to general equilibrium theory (GET), achieve efficient allocations under specific conditions. We study large random economies within the GET framework, as templates of complex economies, and we find that a non-trivial phase transition occurs: the economy freezes in a state where all production processes collapse when either the number of primary goods or the number of available technologies fall below a critical threshold. As in other examples of phase transitions in large random systems, this is an unintended consequence of the growth in complexity. Our findings suggest that the Industrial Revolution can be regarded as a sharp transition between different phases, but also imply that well developed economies can collapse if too many intermediate goods are introduced.

Evaluation of seismic spatial interaction effects through an impact testing program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, B.D.; Driesen, G.E.

The consequences of non-seismically qualified objects falling and striking essential, seismically qualified objects is an analytically difficult problem to assess. Analytical solutions to impact problems are conservative and only available for simple situations. In a nuclear facility, the numerous ``sources`` and ``targets`` requiring evaluation often have complex geometric configurations, which makes calculations and computer modeling difficult. Few industry or regulatory rules are available for this specialized assessment. A drop test program was recently conducted to ``calibrate`` the judgment of seismic qualification engineers who perform interaction evaluations and to further develop seismic interaction criteria. Impact tests on varying combinations of sourcesmore » and targets were performed by dropping the sources from various heights onto targets that were connected to instruments. This paper summarizes the scope, test configurations, and some results of the drop test program. Force and acceleration time history data and general observations are presented on the ruggedness of various targets when subjected to impacts from different types of sources.« less

Evaluation of seismic spatial interaction effects through an impact testing program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, B.D.; Driesen, G.E.

The consequences of non-seismically qualified objects falling and striking essential, seismically qualified objects is an analytically difficult problem to assess. Analytical solutions to impact problems are conservative and only available for simple situations. In a nuclear facility, the numerous sources'' and targets'' requiring evaluation often have complex geometric configurations, which makes calculations and computer modeling difficult. Few industry or regulatory rules are available for this specialized assessment. A drop test program was recently conducted to calibrate'' the judgment of seismic qualification engineers who perform interaction evaluations and to further develop seismic interaction criteria. Impact tests on varying combinations of sourcesmore » and targets were performed by dropping the sources from various heights onto targets that were connected to instruments. This paper summarizes the scope, test configurations, and some results of the drop test program. Force and acceleration time history data and general observations are presented on the ruggedness of various targets when subjected to impacts from different types of sources.« less

Project Management and Systems Engineering Guide. Second Edition

DTIC Science & Technology

1989-09-30

depend on the type of requirement. In general, opera- tional requirements will fall into one of the following categories : 1. Replacement of an existing...Warranty service and maintenance contracts also fall into this support category . The planning for phase-in type support must be accomplished during the...fixed-price incentive (FPI). The second general category of contracts is cost reimbursement. Under a cost- type contract, the product is not paid for on

Engineering Thermostable Microbial Xylanases Toward its Industrial Applications.

PubMed

Kumar, Vishal; Dangi, Arun Kumar; Shukla, Pratyoosh

2018-03-01

Xylanases are one of the important hydrolytic enzymes which hydrolyze the β-1, 4 xylosidic linkage of the backbone of the xylan polymeric chain which consists of xylose subunits. Xylanases are mainly found in plant cell walls and are produced by several kinds of microorganisms such as fungi, bacteria, yeast, and some protozoans. The fungi are considered as most potent xylanase producers than that of yeast and bacteria. There is a broad series of industrial applications for the thermostable xylanase as an industrial enzyme. Thermostable xylanases have been used in a number of industries such as paper and pulp industry, biofuel industry, food and feed industry, textile industry, etc. The present review explores xylanase-substrate interactions using gene-editing tools toward the comprehension in improvement in industrial stability of xylanases. The various protein-engineering and metabolic-engineering methods have also been explored to improve operational stability of xylanase. Thermostable xylanases have also been used for improvement in animal feed nutritional value. Furthermore, they have been used directly in bakery and breweries, including a major use in paper and pulp industry as a biobleaching agent. This present review envisages some of such applications of thermostable xylanases for their bioengineering.

Portage and Path Dependence*

PubMed Central

Bleakley, Hoyt; Lin, Jeffrey

2012-01-01

We examine portage sites in the U.S. South, Mid-Atlantic, and Midwest, including those on the fall line, a geomorphological feature in the southeastern U.S. marking the final rapids on rivers before the ocean. Historically, waterborne transport of goods required portage around the falls at these points, while some falls provided water power during early industrialization. These factors attracted commerce and manufacturing. Although these original advantages have long since been made obsolete, we document the continuing importance of these portage sites over time. We interpret these results as path dependence and contrast explanations based on sunk costs interacting with decreasing versus increasing returns to scale. PMID:23935217

Surveillance of construction worker injuries: the utility of trade-specific analysis.

PubMed

Hunting, K L; Welch, L S; Nessel-Stephens, L; Anderson, J; Mawudeku, A

1999-07-01

Construction is a dangerous industry, with high rates of both fatal and nonfatal injuries. To learn more about the causes of nonfatal construction worker injuries, and to identify injury cases for further work site-based investigations or prevention programs, we established an emergency department-based surveillance program in November 1990. This article describes circumstances of injury, diagnoses, and demographic characteristics of injured construction workers for 2,791 cases identified through mid-August, 1997. Lacerations and strains and sprains were the most frequent diagnoses; cutting and piercing objects were the leading causes of injury among all construction workers, followed by falls and overexertion. Because of the variety of work performed in this industry, more detailed injury descriptions, by trade, are most useful for thinking about injury prevention. To illustrate this, we profile injury patterns among workers from four specific trades: carpenters, electricians, plumbers, and ironworkers. Areas of concern highlighted by the trade-specific analyses include eye injuries among plumbers; falls from ladders among electricians and plumbers; slips, trips, and falls on the same level among ironworkers; electrical exposure among electricians; and, amputations among carpenters.

Engineering Technology Education Bibliography, 1990.

ERIC Educational Resources Information Center

Dyrud, Marilyn A.

1991-01-01

Lists over 340 materials published in 1990 related to engineering technology education and grouped under the following headings: administration; architectural; computer-assisted design/management (CAD/CAM); civil; computers; curriculum; electrical/electronics; industrial; industry/government/employers; instructional technology; laboratories;…

Systems Biology of Industrial Microorganisms

NASA Astrophysics Data System (ADS)

Papini, Marta; Salazar, Margarita; Nielsen, Jens

The field of industrial biotechnology is expanding rapidly as the chemical industry is looking towards more sustainable production of chemicals that can be used as fuels or building blocks for production of solvents and materials. In connection with the development of sustainable bioprocesses, it is a major challenge to design and develop efficient cell factories that can ensure cost efficient conversion of the raw material into the chemical of interest. This is achieved through metabolic engineering, where the metabolism of the cell factory is engineered such that there is an efficient conversion of sugars, the typical raw materials in the fermentation industry, into the desired product. However, engineering of cellular metabolism is often challenging due to the complex regulation that has evolved in connection with adaptation of the different microorganisms to their ecological niches. In order to map these regulatory structures and further de-regulate them, as well as identify ingenious metabolic engineering strategies that full-fill mass balance constraints, tools from systems biology can be applied. This involves both high-throughput analysis tools like transcriptome, proteome and metabolome analysis, as well as the use of mathematical modeling to simulate the phenotypes resulting from the different metabolic engineering strategies. It is in fact expected that systems biology may substantially improve the process of cell factory development, and we therefore propose the term Industrial Systems Biology for how systems biology will enhance the development of industrial biotechnology for sustainable chemical production.

Systems biology of industrial microorganisms.

PubMed

Papini, Marta; Salazar, Margarita; Nielsen, Jens

2010-01-01

The field of industrial biotechnology is expanding rapidly as the chemical industry is looking towards more sustainable production of chemicals that can be used as fuels or building blocks for production of solvents and materials. In connection with the development of sustainable bioprocesses, it is a major challenge to design and develop efficient cell factories that can ensure cost efficient conversion of the raw material into the chemical of interest. This is achieved through metabolic engineering, where the metabolism of the cell factory is engineered such that there is an efficient conversion of sugars, the typical raw materials in the fermentation industry, into the desired product. However, engineering of cellular metabolism is often challenging due to the complex regulation that has evolved in connection with adaptation of the different microorganisms to their ecological niches. In order to map these regulatory structures and further de-regulate them, as well as identify ingenious metabolic engineering strategies that full-fill mass balance constraints, tools from systems biology can be applied. This involves both high-throughput analysis tools like transcriptome, proteome and metabolome analysis, as well as the use of mathematical modeling to simulate the phenotypes resulting from the different metabolic engineering strategies. It is in fact expected that systems biology may substantially improve the process of cell factory development, and we therefore propose the term Industrial Systems Biology for how systems biology will enhance the development of industrial biotechnology for sustainable chemical production.

The application of powerful promoters to enhance gene expression in industrial microorganisms.

PubMed

Zhou, Shenghu; Du, Guocheng; Kang, Zhen; Li, Jianghua; Chen, Jian; Li, Huazhong; Zhou, Jingwen

2017-02-01

Production of useful chemicals by industrial microorganisms has been attracting more and more attention. Microorganisms screened from their natural environment usually suffer from low productivity, low stress resistance, and accumulation of by-products. In order to overcome these disadvantages, rational engineering of microorganisms to achieve specific industrial goals has become routine. Rapid development of metabolic engineering and synthetic biology strategies provide novel methods to improve the performance of industrial microorganisms. Rational regulation of gene expression by specific promoters is essential to engineer industrial microorganisms for high-efficiency production of target chemicals. Identification, modification, and application of suitable promoters could provide powerful switches at the transcriptional level for fine-tuning of a single gene or a group of genes, which are essential for the reconstruction of pathways. In this review, the characteristics of promoters from eukaryotic, prokaryotic, and archaea microorganisms are briefly introduced. Identification of promoters based on both traditional biochemical and systems biology routes are summarized. Besides rational modification, de novo design of promoters to achieve gradient, dynamic, and logic gate regulation are also introduced. Furthermore, flexible application of static and dynamic promoters for the rational engineering of industrial microorganisms is highlighted. From the perspective of powerful promoters in industrial microorganisms, this review will provide an extensive description of how to regulate gene expression in industrial microorganisms to achieve more useful goals.

USAF/SCEEE Summer Faculty Research Program (1982). Research Reports. Volume 2.

DTIC Science & Technology

1982-10-01

Engineering (802) 658-3330 Assigned: RADC/Griffiss Dr. Milton J. Alexander Degree: D.B.A., Management , 1968 Professor Specialty: Management ...Information Auburn University Systems, Operational Management Department Research Auburn, AL 36830 Assigned: LMC (205) 826-4730 Dr. Gary L. Allen Degree: Ph.D...Ph.D., Industrial Professor Engineering, 1951 Oklahoma State University Specialty: Project Management , Industrial Engineering & Management Dept

An Alternative Educational Approach for an Inorganic Chemistry Laboratory Course in Industrial and Chemical Engineering

ERIC Educational Resources Information Center

Garces, Andres; Sanchez-Barba, Luis Fernando

2011-01-01

We describe an alternative educational approach for an inorganic chemistry laboratory module named "Experimentation in Chemistry", which is included in Industrial Engineering and Chemical Engineering courses. The main aims of the new approach were to reduce the high levels of failure and dropout on the module and to make the content match the…

Evaluating the Competency Mismatch between Master of Engineering Graduates and Industry Needs in China

ERIC Educational Resources Information Center

Peng, Lijun; Zhang, Shulin; Gu, Jibao

2016-01-01

This study investigates the mismatch between the educational attainment of a graduate with a Master of Engineering (MEng) degree and the industry needs in China. A competency list for MEng graduates from the perspective of industry needs was constructed. And a survey was conducted among MEng graduate students, alumni, and employers to assess the…

Industry careers for the biomedical engineer.

PubMed

Munzner, Robert F

2004-01-01

This year's conference theme is "linkages for innovation in biomedicine." Biomedical engineers, especially those transitioning their career from academic study into medical device industry, will play a critical role in converting the fruits of scientific research into the reality of modern medical devices. This special session is organized to help biomedical engineers to achieve their career goals more effectively. Participants will have opportunities to hear from and interact with leading industrial experts on many issues. These may include but not limited to 1) career paths for biomedical engineers (industrial, academic, or federal; technical vs. managerial track; small start-up or large established companies); 2) unique design challenges and regulatory requirements in medical device development; 3) aspects of a successful biomedical engineering job candidate (such as resume, interview, follow-up). Suggestions for other topics are welcome and should be directed to xkong@ieee.org The distinguished panelists include: Xuan Kong, Ph.D., VP of Research, NEUROMetrix Inc, Waltham, MA Robert F. Munzner, Ph.D., Medical Device Consultant, Doctor Device, Herndon, VA Glen McLaughlin, Ph.D., VP of Engineering and CTO, Zonare Medical System Inc., Mountain View, CA Grace Bartoo, Ph.D., RAC, General Manager, Decus Biomedical LLC San Carlos, CA.

Outstanding student paper award at the 1996 Fall Meeting

NASA Astrophysics Data System (ADS)

The Planetology Section presented an Outstanding Student Paper Award at the AGU 1996 Fall Meeting in San Francisco, California, in December 1996. Elissa Koenig, presented a poster entitled “Mapping and Modeling of Radial Fracture Patterns on Venus.” Koenig graduated summa cum laude from Princeton University in 1991 with a B.S.E. form the Geological Engineering Program. She then spent a year as a Fulbright Scholar at the University of Auckland, New Zealand, where she studied the fluid dynamics of geyser eruptions. Elissa joined the Geomechanics Research Group at Stanford University in 1993 as an NSF Graduate Fellow, minoring in mechanical engineering. Her Ph.D. dissertation, titled “The Mechanics of Brittle Fracture and Faulting Venus,” explores the processes of both radial dike emplacement and strike-slip faulting.

Synthetic biology advances and applications in the biotechnology industry: a perspective.

PubMed

Katz, Leonard; Chen, Yvonne Y; Gonzalez, Ramon; Peterson, Todd C; Zhao, Huimin; Baltz, Richard H

2018-06-18

Synthetic biology is a logical extension of what has been called recombinant DNA (rDNA) technology or genetic engineering since the 1970s. As rDNA technology has been the driver for the development of a thriving biotechnology industry today, starting with the commercialization of biosynthetic human insulin in the early 1980s, synthetic biology has the potential to take the industry to new heights in the coming years. Synthetic biology advances have been driven by dramatic cost reductions in DNA sequencing and DNA synthesis; by the development of sophisticated tools for genome editing, such as CRISPR/Cas9; and by advances in informatics, computational tools, and infrastructure to facilitate and scale analysis and design. Synthetic biology approaches have already been applied to the metabolic engineering of microorganisms for the production of industrially important chemicals and for the engineering of human cells to treat medical disorders. It also shows great promise to accelerate the discovery and development of novel secondary metabolites from microorganisms through traditional, engineered, and combinatorial biosynthesis. We anticipate that synthetic biology will continue to have broadening impacts on the biotechnology industry to address ongoing issues of human health, world food supply, renewable energy, and industrial chemicals and enzymes.

Parametric and Generative Design Techniques for Digitalization in Building Industry: the Case Study of Glued- Laminated-Timber Industry

NASA Astrophysics Data System (ADS)

Pasetti Monizza, G.; Matt, D. T.; Benedetti, C.

2016-11-01

According to Wortmann classification, the Building Industry (BI) can be defined as engineer-to-order (ETO) industry: the engineering-process starts only when an order is acquired. This definition implies that every final product (building) is almost unique’ and processes cannot be easily standardized or automated. Because of this, BI is one of the less efficient industries today’ mostly leaded by craftsmanship. In the last years’ several improvements in process efficiency have been made focusing on manufacturing and installation processes only. In order to improve the efficiency of design and engineering processes as well, the scientific community agrees that the most fruitful strategy should be Front-End Design (FED). Nevertheless, effective techniques and tools are missing. This paper discusses outcomes of a research activity that aims at highlighting whether Parametric and Generative Design techniques allow reducing wastes of resources and improving the overall efficiency of the BI, by pushing the Digitalization of design and engineering processes of products. Focusing on the Glued-Laminated-Timber industry, authors will show how Parametric and Generative Design techniques can be introduced in a standard supply-chain system, highlighting potentials and criticism on the supply-chain system as a whole.

European research and commercialisation activities in the field of tissue engineering and liver support in world wide competition.

PubMed

Marx, U; Bushnaq, H; Yalcin, E

1998-02-01

Tissue engineering is seen as an interesting field of technology which could improve medical therapy and could also be considered as a commercial opportunity for the European biotechnological industry. Research in the state of the art of science using the MedLine and the Science Citation Index databases, in the patent situation and of the industry dealing with tissue engineering was done. A special method, based on the Science Citation Index Journal Citation Report 1993, for evaluating scientific work was defined. The main countries working in the field of tissue engineering were evaluated in regard to their scientific performance and their patents. The R&D of German industry was investigated as an exemplary European country. Out of all activities, different tissues were rated with respect to the attention received from research and industry and with regard to the frequency in which patents were applied for. USA, Germany and Japan rank first in most tissues, especially liver. After comparing German patents with the German scientific and industrial work, it seems that the potential in German patents and research is underestimated by German industry and inefficiently exploited.

Industrial training approach using GPM P5 Standard for Sustainability in Project Management: a framework for sustainability competencies in the 21st century

NASA Astrophysics Data System (ADS)

Johan, Kartina; Mohd Turan, Faiz

2016-11-01

Malaysian Engineering Accreditation (Engineering Programme Accreditation Manual, 2007) requires all bachelor degree in engineering programmes to incorporate a minimum of two months industrial training in order for the programme to be accredited by the council. The industrial training has the objective to provide students on the insights of being an engineer at the workplace hence increasing their knowledge in employability skills prior to graduation. However the current structure of industrial training is not able to inculcate good leadership ability and prepare students with sustainability competencies needed in the era of Sustainable Development (SD). This paper aims to study project management methodology as a framework to create a training pathway in industrial training for students in engineering programs using Green Project Management (GPM) P5 standard for sustainability in project management. The framework involves students as interns, supervisors from both university and industry and also participation from NonProfit Organisation (NPO). The framework focus on the development of the student's competency in employability skills, lean leadership and sustainability competencies using experiential learning approach. Deliverables of the framework include internship report, professional sustainability report using GPM P5 standard and competency assessment. The post-industrial phase of the framework is constructed for students to be assessed collaboratively by the university, industry and the sustainability practitioner in the country. The ability for the interns to act as a change agent in sustainability practices is measured by the competency assessment and the quality of the sustainability report. The framework support the call for developing holistic students based on Malaysian Education Blueprint (Higher Education) 2015-2025 and address the gap between the statuses of engineering qualification to the sustainability competencies in the 21st century in particular by achieving the Sustainability Graduates (SG) attributes outlined in the framework.

76 FR 59125 - 2011 Fall Meeting of the Ozone Transport Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-23

... security/energy efficiency; architectural industrial and maintenance coatings; consumer products... storage tanks; seaports; aftermarket catalysts; lightering and non-road idling. DATES: The meeting will be...

Foreign Science and Engineering Students in the United States. InfoBrief. NSF 10-324

ERIC Educational Resources Information Center

Burrelli, Joan

2010-01-01

In 2008, about 568,000 foreign students (those holding temporary visas) studied at U.S. universities and colleges, 248,000 of them in science and engineering (S&E). There was an expectation that fall 2009 foreign enrollments might be negatively affected by the 2008-09 world financial crisis because of schools' restrictions on enrollment,…

ARC Researchers at ASME 2015 Internal Combustion Engine Division Fall

Science.gov Websites

-sense. Therefore, the focus of this paper is on the various methods of computing CA50 for analysing and classifying cycle-to-cycle variability. The assumptions made to establish fast and possibly on-line methods SI engine. Then the various fast methods for computing CA50 feed the two statistical methods

A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

ERIC Educational Resources Information Center

Glyer-Culver, Betty

In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

A Curricular Analysis of Undergraduate Technology & Engineering Teacher Preparation Programs in the United States

ERIC Educational Resources Information Center

Litowitz, Len S.

2014-01-01

Technology & engineering teacher preparation programs at colleges and universities in the United States have been in a state of decline since the 1970's. In the fall of 2013 a study was conducted to compare the required curricula of the 24 undergraduate programs that maintain enrollment of 20 students or more in order to determine what a…

Becoming a Woman Engineer in the Community of Practice: Validity and Value in Engineering-Education Research.

ERIC Educational Resources Information Center

Wood, Shaunda L.

The analogy of the leaky pipeline, the notion of women leaving or failing to choose science in droves, is represented frequently by researchers and scientists. "If the structural and cultural causes for the leakages are ignored, attempts at increasing the representation of women at various pipeline segments may fall short" (G. Sonnert,…

Relation of ground water to stream flow at Battle Creek, Mich.

USGS Publications Warehouse

Eddy, G.E.; Ferris, J.G.

1950-01-01

This is a summary of statements made by G.E. Eddy, State Geologist of Michigan, and J.G. Ferris, district engineer, Ground Water Branch, U.S. Geological Survey, Lansing, Mich., in a conference during the fall of 1949 with John Spoden, Chief of the Maintenance and Fold Control Division of the district office of the Corps of Engineers, Milwaukee, Wis. The conference related to the probably effect on ground-water conditions at Battle Creek of flood-control measures proposed by the Corps of Engineers.

The Falls City Engineers: A History of the Louisville District Corps of Engineers United States Army

DTIC Science & Technology

1974-12-24

illegal , though common, method of conducting the In- dian trade, These relationships suggest the multiple military and civil purposes of the...ditious method of h’aveling, e speciall y when your only resource b esides the current was the occasional use of the oar or the sail. F rom sixty to...Ohio in 1819 doubtless influenced his selection b\\" th e Chief of Engin eers in 1824 to s~pervise experiments \\\\"ith methods of improving navigation

Clearing the Jungles of Panama. The Civil Engineer, Fall 1999, Volume 7, Number 3

DTIC Science & Technology

1999-01-01

Clark Air Base, Philippines. After earning an M.S. degree in civil engineering from Arizona State University , he went on to assignments with the...The Civil Engineer - United States Air Force i il i i i Clearing the Jungles of Panama Report Documentation Page Form ApprovedOMB No. 0704-0188...good idea of when and where they’re most likely to be deployed. Tied to deployments is what’s referred to as the “steady- state requirement.” This

26 CFR 1.501(e)-1 - Cooperative hospital service organizations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... illustrated by the following example. Example. An organization performs industrial engineering services on a...-hospitals), warehousing, billing and collection, food, clinical (including radiology), industrial engineering (including the installation, maintenance and repair of biomedical and similar equipment...

26 CFR 1.501(e)-1 - Cooperative hospital service organizations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... illustrated by the following example. Example. An organization performs industrial engineering services on a...-hospitals), warehousing, billing and collection, food, clinical (including radiology), industrial engineering (including the installation, maintenance and repair of biomedical and similar equipment...

26 CFR 1.501(e)-1 - Cooperative hospital service organizations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... illustrated by the following example. Example. An organization performs industrial engineering services on a...-hospitals), warehousing, billing and collection, food, clinical (including radiology), industrial engineering (including the installation, maintenance and repair of biomedical and similar equipment...

26 CFR 1.501(e)-1 - Cooperative hospital service organizations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... illustrated by the following example. Example. An organization performs industrial engineering services on a...-hospitals), warehousing, billing and collection, food, clinical (including radiology), industrial engineering (including the installation, maintenance and repair of biomedical and similar equipment...

26 CFR 1.501(e)-1 - Cooperative hospital service organizations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... illustrated by the following example. Example. An organization performs industrial engineering services on a...-hospitals), warehousing, billing and collection, food, clinical (including radiology), industrial engineering (including the installation, maintenance and repair of biomedical and similar equipment...

75 FR 21043 - Notice of Determinations Terminating Investigations of Petitions Regarding Eligibility To Apply...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-22

...: Advanced Industrial Machinery, Inc., Hickory, North Carolina, covered by TA-W-70,874: Advanced Industrial...,110: JR Engineering, Barberton, Ohio, covered by TA-W-70,975A: B&C Corporation, JR Engineering...

Careers in the Aerospace Industry.

ERIC Educational Resources Information Center

Federal Aviation Administration (DOT), Washington, DC. Office of General Aviation.

The document briefly presents career information in the field of aerospace industry. Employment exists in three areas: (1) professional and technical occupations in research and development (engineers, scientists, and technicians); (2) administrative, clerical, and related occupations (engineers, scientists, technicians, clerks, secretaries,…

2017 Joint Annual NDIA/AIA Industrial Security Committee Fall Conference

DTIC Science & Technology

2017-11-15

beyond credit data to offer the insights that government professionals need to make informed decisions and ensure citizen safety, manage compliance...business that provides information technology and professional services. We specialize in managing business processes and systems integration for both... Information Security System ISFD Industrial Security Facilities Database OBMS ODAA Business Management System STEPP Security, Training, Education and

A segmental analysis of current and future scanning and optimizing technology in the hardwood sawmill industry

Treesearch

S.A. Bowe; R.L. Smith; D. Earl Kline; Philip A. Araman

2002-01-01

A nationwide survey of advanced scanning and optimizing technology in the hardwood sawmill industry was conducted in the fall of 1999. Three specific hardwood sawmill technologies were examined that included current edger-optimizer systems, future edger-optimizer systems, and future automated grading systems. The objectives of the research were to determine differences...

"Recombinant Protein of the Day": Using Daily Student Presentations to Add Real-World Aspects to a Biotechnology Course

ERIC Educational Resources Information Center

Shaffer, Justin F.

2013-01-01

To provide a realistic view of the biotechnology industry for students, a novel course focusing on recombinant proteins and their importance in medicine, pharmaceuticals, industry, scientific research, and agriculture was developed. ''Designer Proteins and Society,'' an upper-division elective, was taught in the Fall 2012 semester to 16 junior,…

Space Industry Commercialization: A Systems Engineering Evaluation of Alternatives

NASA Astrophysics Data System (ADS)

Dinally, Jihan

The Constellation Program cancellation reversed the government and commercial space industry's roles and relationships by dedicating the majority of the federal funding and opportunities to the commercial space industry and left the government space industry in search of an approach to collaborate with the dominant organization, the commercial space industry service providers. The space industry government agencies, Air Force Space Command (AFSPC) and National Aeronautics and Space Administration (NASA) had realized that to gain resources in the new commercially oriented economic environment, they had to work together and possess the capabilities aligned with the National Space Policy's documented goals. Multi-organizational collaboration in space industry programs is challenging, as NASA, AFSPC, and commercial providers, follow different [1] enterprise architecture guidance such as the NASA systems engineering Handbook, MIL-STD-499 and "A Guide to the systems engineering Body of Knowledge" by the International Council on systems engineering [2] [3]. A solution to streamline their enterprise architecture documentation and meet National Space Policy goals is the Multi-User Architecture Maturity Model Methodology (MAM3), which offers a tailored systems engineering technique the government agencies and private companies can implement for the program's maturity level. In order to demonstrate the MAM3, a CubeSat motivated study was conducted partnering a commercial provider with a government agency. A survey of the commercial space industry service providers' capabilities was performed to select the private companies for the study. Using the survey results, the commercial space industry service providers were ranked using the Analytic Hierarchy Process (AHP) [4]. The AHP is a structured technique for making complex decisions for representing and quantifying its weights, relating those weights to overall goals, and evaluating alternative solutions [5] - [8]. The weights applied to each of the alternatives [9] and criteria (i.e. goals) were based on the National Space Policy focused survey administered to United States owned commercial space industry service providers.

Engineering Students' Views of Corporate Social Responsibility: A Case Study from Petroleum Engineering.

PubMed

Smith, Jessica M; McClelland, Carrie J; Smith, Nicole M

2017-12-01

The mining and energy industries present unique challenges to engineers, who must navigate sometimes competing responsibilities and codes of conduct, such as personal senses of right and wrong, professional ethics codes, and their employers' corporate social responsibility (CSR) policies. Corporate social responsibility (CSR) is the current dominant framework used by industry to conceptualize firms' responsibilities to their stakeholders, yet has it plays a relatively minor role in engineering ethics education. In this article, we report on an interdisciplinary pedagogical intervention in a petroleum engineering seminar that sought to better prepare engineering undergraduate students to critically appraise the strengths and limitations of CSR as an approach to reconciling the interests of industry and communities. We find that as a result of the curricular interventions, engineering students were able to expand their knowledge of the social, rather than simply environmental and economic dimensions of CSR. They remained hesitant, however, in identifying the links between those social aspects of CSR and their actual engineering work. The study suggests that CSR may be a fruitful arena from which to illustrate the profoundly sociotechnical dimensions of the engineering challenges relevant to students' future careers.

Mercury and Pregnancy

MedlinePlus

... through industrial processes, like burning waste or burning coal in power plants. It can fall from the ... volcanoes) and man-made sources (such as burning coal and other pollution). You can get methylmercury in ...

75 FR 58378 - 2010 Fall Meeting of the Ozone Transport Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

... efficiency, architectural industrial and maintenance coatings, consumer products, institution [[Page 58379..., seaports, aftermarket catalysts, lightering, and non-road idling. DATES: The meeting will be held on...

Incorporating comparative genomics into the design-test-learn cycle of microbial strain engineering.

PubMed

Sardi, Maria; Gasch, Audrey P

2017-08-01

Engineering microbes with new properties is an important goal in industrial engineering, to establish biological factories for production of biofuels, commodity chemicals and pharmaceutics. But engineering microbes to produce new compounds with high yield remains a major challenge toward economically viable production. Incorporating several modern approaches, including synthetic and systems biology, metabolic modeling and regulatory rewiring, has proven to significantly advance industrial strain engineering. This review highlights how comparative genomics can also facilitate strain engineering, by identifying novel genes and pathways, regulatory mechanisms and genetic background effects for engineering. We discuss how incorporating comparative genomics into the design-test-learn cycle of strain engineering can provide novel information that complements other engineering strategies. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Full hoop casing for midframe of industrial gas turbine engine

DOEpatents

Myers, Gerald A.; Charron, Richard C.

2015-12-01

A can annular industrial gas turbine engine, including: a single-piece rotor shaft spanning a compressor section (82), a combustion section (84), a turbine section (86); and a combustion section casing (10) having a section (28) configured as a full hoop. When the combustion section casing is detached from the engine and moved to a maintenance position to allow access to an interior of the engine, a positioning jig (98) is used to support the compressor section casing (83) and turbine section casing (87).

Design of the subject of quality engineering and security of the product of the degree in engineering in industrial design and development of product based in the methodology of the case

NASA Astrophysics Data System (ADS)

González, M. R.; Lambán, M. P.

2012-04-01

This paper presents the result of designing the subject Quality Engineering and Security of the Product, belonging to the Degree of Engineering in Industrial Design and Product Development, on the basis of the case methodology. Practical sessions of this subject are organized using the whole documents of the Quality System Management of the virtual company BeaLuc S.A.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klipstein, David H.; Robinson, Sharon

The Reaction Engineering Roadmap is a part of an industry- wide effort to create a blueprint of the research and technology milestones that are necessary to achieve longterm industry goals. This report documents the results of a workshop focused on the research needs, technology barriers, and priorities of the chemical industry as they relate to reaction engineering viewed first by industrial use (basic chemicals; specialty chemicals; pharmaceuticals; and polymers) and then by technology segment (reactor system selection, design, and scale-up; chemical mechanism development and property estimation; dealing with catalysis; and new, nonstandard reactor types).

The Study on Neuro-IE Management Software in Manufacturing Enterprises. -The Application of Video Analysis Technology

NASA Astrophysics Data System (ADS)

Bian, Jun; Fu, Huijian; Shang, Qian; Zhou, Xiangyang; Ma, Qingguo

This paper analyzes the outstanding problems in current industrial production by reviewing the three stages of the Industrial Engineering Development. Based on investigations and interviews in enterprises, we propose the new idea of applying "computer video analysis technology" to new industrial engineering management software, and add "loose-coefficient" of the working station to this software in order to arrange scientific and humanistic production. Meanwhile, we suggest utilizing Biofeedback Technology to promote further research on "the rules of workers' physiological, psychological and emotional changes in production". This new kind of combination will push forward industrial engineering theories and benefit enterprises in progressing towards flexible social production, thus it will be of great theory innovation value, social significance and application value.

The Need for Speed. Hypersonic Aircraft and the Transformation of Long Range Airpower

DTIC Science & Technology

2005-06-01

lxxii Heppenheimer , Thomas A . “Origins of Hypersonic Propulsion: A Personal History.” Air Power History 47, no. 3 (Fall 2000), 14-27. Hicks, John W...early Aerospace plane research. 59 Thomas A . Heippenheimer, “Origins of Hypersonic Propulsion: A Personal History,” Air Power History 47, no. 3 (Fall...experiments with hypersonic engines. 65 Ibid. 66 Thomas A . Heippenheimer, 15. 67 Ibid., 17-18. Lockheed and General Applied Science Laboratories

The ET as it falls away from the orbiter after separation on STS-121

NASA Image and Video Library

2006-07-04

S121-E-05006 (4 July 2006) --- This picture of the STS-121 external tank was taken with a digital still camera by an astronaut only seconds after separation from the Space Shuttle Discovery on launch day. Engineers, managers and flight controllers have carefully studied this image and other frames from this series as well as a number of pictures showing the falling ET as photographed from umbilical well cameras.

The ET as it falls away from the orbiter after separation on STS-121

NASA Image and Video Library

2006-07-04

STS121-E-05011 (4 July 2006)-- This picture of the STS-121 external tank was taken with a digital still camera by an astronaut only seconds after separation from the Space Shuttle Discovery on launch day. Engineers, managers and flight controllers have carefully studied this image and other frames from this series as well as a number of pictures showing the falling ET as photographed from umbilical well cameras.

The ET as it falls away from the orbiter after separation on STS-121

NASA Image and Video Library

2006-07-04

STS121-E-05008 (4 July 2006)-- This picture of the STS-121 external tank was taken with a digital still camera by an astronaut only seconds after separation from the Space Shuttle Discovery on launch day. Engineers, managers and flight controllers have carefully studied this image and other frames from this series as well as a number of pictures showing the falling ET as photographed from umbilical well cameras.

Clean Air Act Standards and Guidelines for Energy, Engines, and Combustion

EPA Pesticide Factsheets

This page contains the stationary sources of air pollution for the energy, engines, and combustion industries, and their corresponding air pollution regulations. To learn more about the regulations for each industry, just click on the links below.

Job Prospects for Industrial Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1985-01-01

Recent economic growth and improved manufacturing profitability are supporting increased employment for industrial engineers. Promising areas include modernizing manufacturing technology and productivity with large amounts of hiring in aerospace, electronics, and instrumentation. Percentages of women employed in these fields for 1982 and 1983 are…

Chemists, Engineers Probe Mutual Problems.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1980

1980-01-01

Summarizes recommendations made in a workshop sponsored by the American Chemical Society concerning issues involving the diverging viewpoints of chemistry and chemical engineering. Includes recommendations regarding curricula, salary differences, and the need to change attitudes of chemistry faculty toward industry and industrial chemistry. (CS)

Profiles of Automotive Suppliers Industries--Engineered Mechanical Components and Systems : Volume I, Text.

DOT National Transportation Integrated Search

1981-09-01

This profile describes and analyzes that segment of the automotive supplier industry which provides engineered mechanical components/assemblies/systems to the prime auto manufacturers. It presents an overview of the role and structure of this industr...

Engineered Plants Make Potential Precursor to Raw Material for Plastics

ScienceCinema

Shanklin, John

2018-06-12

In a first step toward achieving industrial-scale green production, scientists from BNL and collaborators at Dow AgroSciences report engineering a plant that produces industrially relevant levels of chemicals that could potentially be used to make plastics.

The cost effectiveness of occupational health interventions: preventing occupational back pain.

PubMed

Lahiri, Supriya; Markkanen, Pia; Levenstein, Charles

2005-12-01

Occupational back pain exacts a toll on society with concomitant economic losses; it is imperative to evaluate the cost-effectiveness of interventions to reduce the relevant ergonomic stressors at work. This study estimates and evaluates the average and incremental cost-effectiveness ratios (CERs) of specific interventions for the prevention of occupationally induced back pain for the World Health Organization (WHO) defined subregions of the world. Four back-pain interventions were selected from the literature: training (T), engineering controls (EC), engineering controls and training (EC&T), and a comprehensive full ergonomics program (EP) for evaluation. A simulation model for a 100-year time horizon, developed by the WHO CHOICE initiative project was used to estimate the effectiveness of the interventions in healthy year equivalents. The intervention costs were adjusted for all WHO subregions. In all of the subregions, training was the most cost-effective with CERs varying from 74 dollars per healthy life years gained in the subregion comprising of Egypt, Iraq, Morocco, Yemen (EMROD) to approximately 567 dollars in the subregion covering Canada and the United States (AMROA). Training is considered to be very cost-effective and would be the first choice option where resources are scarce. However, the overall effectiveness of training is low. Although other interventions such as engineering controls and total ergonomic interventions are relatively more expensive, the addition to health outcome through these interventions is much higher. The difference in the CERs for training and other engineering controls and full ergonomic interventions is relatively small for most of the industrialized regions of the world. It is clear from the ranked CERs and incremental CERs over the different subregions that in most of the industrialized regions of the world additional resources, if they become available, should go straight to the full ergonomics program. The model results based on CERs show that worker training is a low cost, feasible first step toward reducing back pain/injury incidence. However, all of the average CERs for the different interventions, for each of the regions, fall well within their GDP per capita estimates [World Bank, 2001]. According to the WHO Commission on Macroeconomics and Health any intervention that costs less than three times GDP per capita for saving a healthy year equivalent should be considered worthwhile and good value for money [WHO, 2002]. Given this criterion, the engineering controls interventions as well as the full ergonomics program look very cost effective for all of the WHO subregions. 2005 Wiley-Liss, Inc.

Stable integration and expression of a cry1Ia gene conferring resistance to fall armyworm and boll weevil in cotton plants.

PubMed

Silva, Carliane Rc; Monnerat, Rose; Lima, Liziane M; Martins, Érica S; Melo Filho, Péricles A; Pinheiro, Morganna Pn; Santos, Roseane C

2016-08-01

Boll weevil is a serious pest of cotton crop. Effective control involves applications of chemical insecticides, increasing the cost of production and environmental pollution. The current genetically modified Bt crops have allowed great benefits to farmers but show activity limited to lepidopteran pests. This work reports on procedures adopted for integration and expression of a cry transgene conferring resistance to boll weevil and fall armyworm by using molecular tools. Four Brazilian cotton cultivars were microinjected with a minimal linear cassette generating 1248 putative lines. Complete gene integration was found in only one line (T0-34) containing one copy of cry1Ia detected by Southern blot. Protein was expressed in high concentration at 45 days after emergence (dae), decreasing by approximately 50% at 90 dae. Toxicity of the cry protein was demonstrated in feeding bioassays revealing 56.7% mortality to boll weevil fed buds and 88.1% mortality to fall armyworm fed leaves. A binding of cry1Ia antibody was found in the midgut of boll weevils fed on T0-34 buds in an immunodetection assay. The gene introduced into plants confers resistance to boll weevil and fall armyworm. Transmission of the transgene occurred normally to T1 progeny. All plants showed phenotypically normal growth, with fertile flowers and abundant seeds. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

The Exploration and Practice of Gradually Industrialization Model in Software Engineering Education: A Factual Instance of the Excellent Engineer Plan of China

ERIC Educational Resources Information Center

Liu, Shu; Ma, Peijun; Li, Dong

2012-01-01

The current education model and practices in the Higher education sector in China have been successful in educating students for academic excellence, for producing industry-linked and practice-oriented graduates, who could quickly fit into the industrial working environment, has been a problem. There is a big gap between the theoretical knowledge…

Competency Focused Engineering Education with Reference to IT Related Disciplines: Is the Indian System Ready for Transformation?

ERIC Educational Resources Information Center

Goel, Sanjay

2006-01-01

The growth of the Indian IT industry has been of great interest to the international IT community. Nearly one third of fresh Indian engineering graduates are currently joining the IT industry irrespective of their specialization. The success of the Indian IT industry, however, has not been yet been leveraged for developing India as a preferred…

Development of Iron Aluminides.

DTIC Science & Technology

1986-03-01

in the evolution of technology for the aerospace industry. This is particularly true for the gas turbine engine industry, where the requirements for...vulnerability of the U.S. gas turbine industry in terms of its heavy reliance upon non-domestic sources for much of its strategic metals requirements...superalloys used in gas turbine engines. The questionable future availability of chromium, for example, poses a potential serious threat to these applicacions

Evaluation of Project Based Learning in the Area of Manufacturing and Statistics in the Degree of Industrial Technology

ERIC Educational Resources Information Center

Buj-Corral, Irene; Marco-Almagro, Lluís; Riba, Alex; Vivancos-Calvet, Joan; Tort-Martorell, Xavier

2015-01-01

In the subject Project I in the second year of the Degree in Industrial Technology Engineering taught at the School of Industrial Engineering of Barcelona (ETSEIB), subgroups of 3-4 students within groups of 20 students develop a project along a semester. Results of 2 projects are presented related to manufacturing, measurement of parts and the…

Competitive Tradeoff Modeling: Methodology, Computation, and Testing

DTIC Science & Technology

1997-12-01

variational inequalities produced the dissertation of Ozge [4], which presented and justified a new method for numerical solution of stochastic...Philosophy (Industrial Engineering) in 1996. • A. Yonca Ozge , Research Assistant. Ms. Ozge received the degree of Doctor of Philosophy (Industrial...Ph.D. Disserta- tion, Department of Industrial Engineering, University of Wisconsin- Madison, 1996. [2] G. Gürkan, A. Y. Ozge , and S. M. Robinson

Summary of SMIRT20 Preconference Topical Workshop – Identifying Structural Issues in Advanced Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

William Richins; Stephen Novascone; Cheryl O'Brien

Summary of SMIRT20 Preconference Topical Workshop – Identifying Structural Issues in Advanced Reactors William Richins1, Stephen Novascone1, and Cheryl O’Brien1 1Idaho National Laboratory, US Dept. of Energy, Idaho Falls, Idaho, USA, e-mail: William.Richins@inl.gov The Idaho National Laboratory (INL, USA) and IASMiRT sponsored an international forum Nov 5-6, 2008 in Porvoo, Finland for nuclear industry, academic, and regulatory representatives to identify structural issues in current and future advanced reactor design, especially for extreme conditions and external threats. The purpose of this Topical Workshop was to articulate research, engineering, and regulatory Code development needs. The topics addressed by the Workshop were selectedmore » to address critical industry needs specific to advanced reactor structures that have long lead times and can be the subject of future SMiRT technical sessions. The topics were; 1) structural/materials needs for extreme conditions and external threats in contemporary (Gen. III) and future (Gen. IV and NGNP) advanced reactors and 2) calibrating simulation software and methods that address topic 1 The workshop discussions and research needs identified are presented. The Workshop successfully produced interactive discussion on the two topics resulting in a list of research and technology needs. It is recommended that IASMiRT communicate the results of the discussion to industry and researchers to encourage new ideas and projects. In addition, opportunities exist to retrieve research reports and information that currently exists, and encourage more international cooperation and collaboration. It is recommended that IASMiRT continue with an off-year workshop series on select topics.« less

Ceramic regenerator systems development program

NASA Technical Reports Server (NTRS)

Cook, J. A.; Fucinari, C. A.; Lingscheit, J. N.; Rahnke, C. J.; Rao, V. D.

1978-01-01

Ceramic regenerator cores are considered that can be used in passenger car gas turbine engines, Stirling engines, and industrial/truck gas turbine engines. Improved materials and design concepts aimed at reducing or eliminating chemical attack were placed on durability tests/in industrial gas turbine engines. A regenerator core made from aluminum silicate shows minimal evidence of chemical attack damage after 7804 hours of engine test at 800 C and another showed little distress after 4983 hours at 982 C. The results obtained in ceramic material screening tests, aerothermodynamic performance tests, stress analysis, cost studies, and material specifications are also included.

Education, Technology, and Media: A Peak into My Summer Internship at NASA Glenn Research Center in Cleveland, Ohio

NASA Technical Reports Server (NTRS)

Moon, James

2004-01-01

My name is James Moon and I am a senor at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time sohare applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community.

Dedicated Industrial Oilseed Crops as Metabolic Engineering Platforms for Sustainable Industrial Feedstock Production

PubMed Central

Zhu, Li-Hua; Krens, Frans; Smith, Mark A.; Li, Xueyuan; Qi, Weicong; van Loo, Eibertus N.; Iven, Tim; Feussner, Ivo; Nazarenus, Tara J.; Huai, Dongxin; Taylor, David C.; Zhou, Xue-Rong; Green, Allan G.; Shockey, Jay; Klasson, K. Thomas; Mullen, Robert T.; Huang, Bangquan; Dyer, John M.; Cahoon, Edgar B.

2016-01-01

Feedstocks for industrial applications ranging from polymers to lubricants are largely derived from petroleum, a non-renewable resource. Vegetable oils with fatty acid structures and storage forms tailored for specific industrial uses offer renewable and potentially sustainable sources of petrochemical-type functionalities. A wide array of industrial vegetable oils can be generated through biotechnology, but will likely require non-commodity oilseed platforms dedicated to specialty oil production for commercial acceptance. Here we show the feasibility of three Brassicaceae oilseeds crambe, camelina, and carinata, none of which are widely cultivated for food use, as hosts for complex metabolic engineering of wax esters for lubricant applications. Lines producing wax esters >20% of total seed oil were generated for each crop and further improved for high temperature oxidative stability by down-regulation of fatty acid polyunsaturation. Field cultivation of optimized wax ester-producing crambe demonstrated commercial utility of these engineered crops and a path for sustainable production of other industrial oils in dedicated specialty oilseeds. PMID:26916792

Dedicated Industrial Oilseed Crops as Metabolic Engineering Platforms for Sustainable Industrial Feedstock Production.

PubMed

Zhu, Li-Hua; Krens, Frans; Smith, Mark A; Li, Xueyuan; Qi, Weicong; van Loo, Eibertus N; Iven, Tim; Feussner, Ivo; Nazarenus, Tara J; Huai, Dongxin; Taylor, David C; Zhou, Xue-Rong; Green, Allan G; Shockey, Jay; Klasson, K Thomas; Mullen, Robert T; Huang, Bangquan; Dyer, John M; Cahoon, Edgar B

2016-02-26

Feedstocks for industrial applications ranging from polymers to lubricants are largely derived from petroleum, a non-renewable resource. Vegetable oils with fatty acid structures and storage forms tailored for specific industrial uses offer renewable and potentially sustainable sources of petrochemical-type functionalities. A wide array of industrial vegetable oils can be generated through biotechnology, but will likely require non-commodity oilseed platforms dedicated to specialty oil production for commercial acceptance. Here we show the feasibility of three Brassicaceae oilseeds crambe, camelina, and carinata, none of which are widely cultivated for food use, as hosts for complex metabolic engineering of wax esters for lubricant applications. Lines producing wax esters >20% of total seed oil were generated for each crop and further improved for high temperature oxidative stability by down-regulation of fatty acid polyunsaturation. Field cultivation of optimized wax ester-producing crambe demonstrated commercial utility of these engineered crops and a path for sustainable production of other industrial oils in dedicated specialty oilseeds.

Engineering and public health at CDC.

PubMed

Earnest, G Scott; Reed, Laurence D; Conover, D; Estill, C; Gjessing, C; Gressel, M; Hall, R; Hudock, S; Hudson, H; Kardous, C; Sheehy, J; Topmiller, J; Trout, D; Woebkenberg, M; Amendola, A; Hsiao, H; Keane, P; Weissman, D; Finfinger, G; Tadolini, S; Thimons, E; Cullen, E; Jenkins, M; McKibbin, R; Conway, G; Husberg, B; Lincoln, J; Rodenbeck, S; Lantagne, D; Cardarelli, J

2006-12-22

Engineering is the application of scientific and technical knowledge to solve human problems. Using imagination, judgment, and reasoning to apply science, technology, mathematics, and practical experience, engineers develop the design, production, and operation of useful objects or processes. During the 1940s, engineers dominated the ranks of CDC scientists. In fact, the first CDC director, Assistant Surgeon General Mark Hollis, was an engineer. CDC engineers were involved in malaria control through the elimination of standing water. Eventually the CDC mission expanded to include prevention and control of dengue, typhus, and other communicable diseases. The development of chlorination, water filtration, and sewage treatment were crucial to preventing waterborne illness. Beginning in the 1950s, CDC engineers began their work to improve public health while developing the fields of environmental health, industrial hygiene, and control of air pollution. Engineering disciplines represented at CDC today include biomedical, civil, chemical, electrical, industrial, mechanical, mining, and safety engineering. Most CDC engineers are located in the National Institute for Occupational Safety and Health (NIOSH) and the Agency for Toxic Substances and Disease Registry (ATSDR). Engineering research at CDC has a broad stakeholder base. With the cooperation of industry, labor, trade associations, and other stakeholders and partners, current work includes studies of air contaminants, mining, safety, physical agents, ergonomics, and environmental hazards. Engineering solutions remain a cornerstone of the traditional "hierarchy of controls" approach to reducing public health hazards.

Allison moving forward

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raflo, D.

1994-07-01

Allison has been on its own since December 1, when General Motors Corporation sold its former Allison Gas Turbine Division to Clayton, Dubilier & Rice Inc, a private New York investment firm, and a group of senior Allison managers for $318 million. Allison engine Company`s current product line includes large engines, small aircraft engines, and industrial engines. Over 140,000 engines have been produced since 1915, giving Allison a large stake in world leaderhsip. With strong cogeneration markets already established in Europe and Japan, Allison`s industrial engines are being positioned to compete in emerging markets in China, Indonesia and the Sovietmore » Union. Cogeneration market potential in the US improves despite the current popularity with abundant, low-cost natural gas because of the South Coast Air Control Management District`s push for reduced emissions. The new 7000-shp KB7 industrial engine is the latest addition to the 501K engine family, and adds increased power (by 1700 shp), with a boost compressor to the current core compressor increasing air flow, along with a new low-loss exhaust system. Allison`s new AE series of turboprop (AE 2100) and turbofan (AE 3007) engines, with engine cores derived from the T406 design, have been selected to power regional airliners. 2 figs.« less

Industry Partners at CBE

Science.gov Websites

* Charles M. Salter Associates DIALOG HGA Architects and Engineers HOK Integral Group Interface Engineering + Will SERA Architects Taylor Engineering Team: Atelier Ten Taylor Engineering TRC Energy Services

Under pressure: evolutionary engineering of yeast strains for improved performance in fuels and chemicals production.

PubMed

Mans, Robert; Daran, Jean-Marc G; Pronk, Jack T

2018-04-01

Evolutionary engineering, which uses laboratory evolution to select for industrially relevant traits, is a popular strategy in the development of high-performing yeast strains for industrial production of fuels and chemicals. By integrating whole-genome sequencing, bioinformatics, classical genetics and genome-editing techniques, evolutionary engineering has also become a powerful approach for identification and reverse engineering of molecular mechanisms that underlie industrially relevant traits. New techniques enable acceleration of in vivo mutation rates, both across yeast genomes and at specific loci. Recent studies indicate that phenotypic trade-offs, which are often observed after evolution under constant conditions, can be mitigated by using dynamic cultivation regimes. Advances in research on synthetic regulatory circuits offer exciting possibilities to extend the applicability of evolutionary engineering to products of yeasts whose synthesis requires a net input of cellular energy. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Theory and Practice Meets in Industrial Process Design -Educational Perspective-

NASA Astrophysics Data System (ADS)

Aramo-Immonen, Heli; Toikka, Tarja

Software engineer should see himself as a business process designer in enterprise resource planning system (ERP) re-engineering project. Software engineers and managers should have design dialogue. The objective of this paper is to discuss the motives to study the design research in connection of management education in order to envision and understand the soft human issues in the management context. Second goal is to develop means of practicing social skills between designers and managers. This article explores the affective components of design thinking in industrial management domain. In the conceptual part of this paper are discussed concepts of network and project economy, creativity, communication, use of metaphors, and design thinking. Finally is introduced empirical research plan and first empirical results from design method experiments among the multi-disciplined groups of the master-level students of industrial engineering and management and software engineering.

Assessing the Higher National Diploma Chemical Engineering programme in Ghana: students' perspective

NASA Astrophysics Data System (ADS)

Boateng, Cyril D.; Cudjoe Bensah, Edem; Ahiekpor, Julius C.

2012-05-01

Chemical engineers have played key roles in the growth of the chemical and allied industries in Ghana but indigenous industries that have traditionally been the domain of the informal sector need to be migrated to the formal sector through the entrepreneurship and innovation of chemical engineers. The Higher National Diploma Chemical Engineering programme is being migrated from a subject-based to a competency-based curriculum. This paper evaluates the programme from the point of view of students. Data were drawn from a survey conducted in the department and were analysed using SPSS. The survey involved administering questionnaires to students at all levels in the department. Analysis of the responses indicated that the majority of the students had decided to pursue chemical engineering due to the career opportunities available. Their knowledge of the programme learning outcomes was, however, poor. The study revealed that none of the students was interested in developing indigenous industries.

Development of Graduate Course Education by Industry Collaboration in Center for Engineering Education Development, CEED

NASA Astrophysics Data System (ADS)

Noguchi, Toru; Yoshikawa, Kozo; Nakamura, Masato; Kaneko, Katsuhiko

New education programs for engineering graduate courses, and the achievements are described. Following the previous reports on overseas and domestic internship2) , 3) , this article states other common programs ; seminars on state of technologies in industries, practical English and internationalization programs, and a program to accept overseas internship students. E-learning system to assist off-campus students is also described. All these programs are developed and conducted by specialist professors invited from industries and national institutions, in collaboration with faculty professors. Students learn how the engineering science apply to the practical problems, acquire wider view and deeper understanding on industries, and gain abilities to act in global society including communication skill, those are not taught in classrooms and laboratories. Educational effects of these industry collaborated programs is significant to activate the graduate course education, although the comprehensive evaluation is the future subject.

Fall Protection Procedures for Sealing Bulk Waste Shipments by Rail Cars at Formerly Utilized Sites Remedial Action Program (FUSRAP) Sites - 13509

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyle, J.D.; Fort, E. Joseph; Lorenz, William

2013-07-01

Rail-cars loaded with radioactive materials must be closed and fastened to comply with United States Department of Transportation (DOT) requirements before they shipped. Securing waste shipments in a manner that meets these regulations typically results in the use of a sealable rail-car liner. Workers accessing the tops of the 2.74 m high rail-cars to seal and inspect liners for compliance prior to shipment may be exposed to a fall hazard. Relatively recent revisions to the Fall Protection requirements in the Safety and Health Requirements Manual (EM385-1-1, U.S. Army Corps of Engineers) have necessitated modifications to the fall protection systems previouslymore » employed for rail-car loading at Formerly Utilized Sites Remedial Action Program (FUSRAP) sites. In response these projects have developed site-specific procedures to protect workers and maintain compliance with the improved fall protection regulations. (authors)« less

Innovative Ways of Teaching Polymerization Reaction Engineering: Exchanging Information between the University and Industry.

ERIC Educational Resources Information Center

Soares, Joao B. P.; Penlidis, Alexander; Hamielec, Archie E.

1998-01-01

Describes how interaction with several polymer manufacturing companies through industrial short courses and research projects has led to the development of dynamic and up-to-date undergraduate and graduate curriculums in polymer science and engineering technology. (DDR)

Enhanced Learning from an Industry-University Partnership. Aluminum Engineering Course Design and Development.

ERIC Educational Resources Information Center

Pai, Devdas M.; DeBlasio, Richard A.

1997-01-01

The example of Alcoa and North Carolina State University shows that partnerships in course design, development, and delivery can result in an engineering curriculum that bridges theory and practice and makes students aware of industry expectations. (SK)

75 FR 8316 - Office of Postsecondary Education; Overview Information; Erma Byrd Scholarship Program; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... Transmittal of Applications: March 26, 2010. Full Text of Announcement I. Funding Opportunity Description... related to industrial health and safety: Mining and mineral engineering, industrial engineering... technology/technician, hazardous materials information systems technology/technician, mining technology...

29 CFR 1926.602 - Material handling equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Engineers J333a-1970, Operator Protection for Agricultural and Light Industrial Tractors. (ii) Seat belts... wheel tractors, bulldozers, off-highway trucks, graders, agricultural and industrial tractors, and... Society of Automotive Engineers, J386-1969, Seat Belts for Construction Equipment. Seat belts for...

29 CFR 1926.602 - Material handling equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Engineers J333a-1970, Operator Protection for Agricultural and Light Industrial Tractors. (ii) Seat belts... wheel tractors, bulldozers, off-highway trucks, graders, agricultural and industrial tractors, and... Society of Automotive Engineers, J386-1969, Seat Belts for Construction Equipment. Seat belts for...

Acoustics: A branch of engineering at the Universidad Austral de Chile (UACh)

NASA Astrophysics Data System (ADS)

Poblete, Victor; Arenas, Jorge P.; Sommerhoff, Jorge

2002-11-01

At the end of the 1960s, the first acousticians graduating at UACh had acquired an education in applied physics and musical arts, since there was no College of Engineering at that time. Initially, they had a (rather modest) four-year undergraduate program, and most of the faculty were not specialized teachers. The graduates from such a program received a sound engineering degree and they were skilled for jobs in the musical industry and sound reinforcement companies. In addition, they worked as sound engineers and producers. Later, because of the scientific, industrial and educational changes in Chile during the 1980s, the higher education system had massive changes that affected all of the undergraduate and graduate programs of the 61 universities in Chile. The UACh College of Engineering was officially founded in 1989. Then, acoustics as an area of expertise was included, widened and developed as an interdisciplinary subject. Currently, the undergraduate program in acoustics at UACh offers a degree in engineering sciences and a 6-year professional studies in Civil Engineering (Acoustics), having two main fields: Sound and Image, and Environment and Industry.

Master of Engineering Energy Systems Engineering Program: Smart Campus Energy Systems Demonstration DE-SC0005523

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dodge, Martha; Coulter, John

2014-09-25

Program Purpose and Position: The mission of the Master of Engineering in Energy Systems Engineering program is to invigorate the pipeline of new engineering graduates interested in energy oriented careers and thus produce a new generation of technical leaders for the energy and power industries. Over the next decade, nearly 50% of the skilled workers and technical leaders in the gas and electric utility industries will retire -- a much larger void than the current available and qualified professionals could fill [CEWD, 2012 survey]. The Masters of Engineering in Energy System Engineering program provides an opportunity for cross-discipline education formore » graduates interested in a career in the energy industry. It focuses on electric power and the challenges and opportunities to develop a sustainable, reliable and resilient system that meets human needs in an increasingly sustainable manner through the use of environmentally sound energy resources and delivery. Both graduates and employers benefit from a well-trained professional workforce that is ready to hit the road running and be immediately productive in meeting these challenges, through this innovative and unique program.« less

The epidemiology of slips, trips, and falls in a helicopter manufacturing plant.

PubMed

Amandus, Harlan; Bell, Jennifer; Tiesman, Hope; Biddle, Elyce

2012-06-01

The purpose of this evaluation was to evaluate the causes and costs of slips, trips, and falls (STFs) in a helicopter manufacturing plant. STFs are a significant portion of the total industry injury burden. For this study, 4,070 helicopter plant workers who were employed from January 1, 2004, through February 28, 2008, were enrolled. Company records on workers' compensation claims, occupational health first report of injury, and payroll records on hours worked were collected. Cause and source of all injuries, including STFs, were coded for analysis. During the 4-year study period, there were 2,378 injuries and 226 STFs (46 falls [20%] to a lower level, 117 [52%] falls on the same level, 41 [18%] from loss of balance without a fall, and 22 [10%] from other events). Of the 226 STFs, 123 falls to the same level were caused by slippery substances (52), objects on floor (43), and surface hazards (28), and they cost $1,543,946. Falls to lower levels primarily involved access to stands to and from aircraft and falling off large machines. More than half of the STF injury claims likely could have been prevented by housekeeping and maintenance, and this cost saving could reasonably offset a considerable portion of the cost of prevention. Training and stand modifications could be considered to prevent falls from elevation from stands, machines, and aircraft. Recommendations for STF prevention are discussed.

SERS internship Fall 1992--Spring 1993: Abstract and research papers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-08-05

This report contains the abstracts and research papers by students on a variety of topics in engineering, genetics, solid state physics, thermonuclear energy, astrophysics, and other science related topics.

Alternative Fuels Data Center: Conversion Regulations

Science.gov Websites

longer "new or relatively new" but still fall within EPA's definition of useful life of vehicles or engines that are outside EPA's definition of useful life. Manufacturers must submit

Pahoa geothermal industrial park. Engineering and economic analysis for direct applications of geothermal energy in an industrial park at Pahoa, Hawaii

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moreau, J.W.

1980-12-01

This engineering and economic study evaluated the potential for developing a geothermal industrial park in the Puna District near Pahoa on the Island of Hawaii. Direct heat industrial applications were analyzed from a marketing, engineering, economic, environmental, and sociological standpoint to determine the most viable industries for the park. An extensive literature search produced 31 existing processes currently using geothermal heat. An additional list was compiled indicating industrial processes that require heat that could be provided by geothermal energy. From this information, 17 possible processes were selected for consideration. Careful scrutiny and analysis of these 17 processes revealed three thatmore » justified detailed economic workups. The three processes chosen for detailed analysis were: an ethanol plant using bagasse and wood as feedstock; a cattle feed mill using sugar cane leaf trash as feedstock; and a papaya processing facility providing both fresh and processed fruit. In addition, a research facility to assess and develop other processes was treated as a concept. Consideration was given to the impediments to development, the engineering process requirements and the governmental support for each process. The study describes the geothermal well site chosen, the pipeline to transmit the hydrothermal fluid, and the infrastructure required for the industrial park. A conceptual development plan for the ethanol plant, the feedmill and the papaya processing facility was prepared. The study concluded that a direct heat industrial park in Pahoa, Hawaii, involves considerable risks.« less

Yeast Surface Display Approaches for Engineering Stabilized Viral Fusion Protein Subunit Vaccines

DTIC Science & Technology

This research proposal focuses on the development of a novel library screening approach to engineering highly stabilized subunit vaccine candidates...for major pathogens within the paramyxovirus family. The research addresses the PRMRP topic areas related to vaccine development for infectious...proposal focuses on four viruses that fall into two subclasses within the broader family, respiratory syncytial virus (RSV), human metapneumovirus (HMPV

Graduate Science Education: Student Support and Postdoctorals, Fall 1973. Surveys of Science Resources Series. No. NSF-74-318.

ERIC Educational Resources Information Center

Foster, Penny; And Others

A survey launched in 1972 to continue to provide a national data base on financial aid to graduate students in sciences and engineering yielded statistics based on a 100 percent response rate from 6,559 master's and doctorate departments in 339 institutions awarding science and engineering doctorate degrees, including 104 separate medical schools.…

Manufacturing Technology for Shipbuilding

DTIC Science & Technology

1983-01-01

during which time there was an interface of Japanese and American shipbuilding concepts and methodology . Those two years of work resulted in many...lanes is of paramount importance in maintaining a smoothy orderly flow of pre-fabricated steel. Occasionally, the process lanes may fall behind schedule...design methodology . The earlier the start that Engineering has, the better the chance that all required engineering work will be completed at start of

Bridging the Technology Valley of Death in Joint Medical Development

DTIC Science & Technology

2015-11-01

Force lieutenant colonel, is the Air Force Medical Support Agency Advanced Development Liaison Field Engineer in Falls Church, Virginia. Prusaczyk is...Awareness, communication and coordination may be mini - mal among Service S&T and AD programs. Joint Transition Planning Process A Joint Transition...Human Proof of Phase III NDA/BLA ling Approval, Launch Concept*** Launch Review Program Initiation Materiel Technology Engineering & Production

Comparing the Effectiveness of Blended, Semi-Flipped, and Flipped Formats in an Engineering Numerical Methods Course

ERIC Educational Resources Information Center

Clark, Renee M.; Kaw, Autar; Besterfield-Sacre, Mary

2016-01-01

Blended, flipped, and semi-flipped instructional approaches were used in various sections of a numerical methods course for undergraduate mechanical engineers. During the spring of 2014, a blended approach was used; in the summer of 2014, a combination of blended and flipped instruction was used to deliver a semi-flipped course; and in the fall of…

Coast Guard Proceedings. Volume 70, Number 3, Fall 2013

DTIC Science & Technology

2013-01-01

author. Beach areas support recreation, culture, tourism , and provide opportunities for the public to connect with the ocean. U.S. Coast Guard photo...involvement — including the public, tribal leaders, industry, nonprofit and private groups, energy, rec- reational and commercial fishing, tourism ...industry, tourism , and energy). for marine planning to succeed, stakeholders must accept the planning goals. Additionally, long-term goals and visions

Army Industrial Fund Rate Stabilization Program.

DTIC Science & Technology

1986-11-01

orders. Most cost reimbursable orders fall outside of the four exclusions authorized by the revised DA policy on fixed rate orders. Of the cost reimbur ... reimbursable programs. , . 20 DISTRIBUTION/AVAILABILITY OF ABSTRArT 21 ABSTRACT SECURITY CLASSIFICATION M UNCLASSIFIED/UNLIMITED 0 SAME AS RPT - DTIC USERS...customers who reimburse the fund. Industrial funds are intended to be self-sustaining. Department of Defense (DOD) policy as enumerated in DOD

The Role of Diaspora in University-Industry Relationships in Globalised Knowledge Economy: The Case of Palestine

ERIC Educational Resources Information Center

Sharabati-Shahin, Mervat H. N.; Thiruchelvam, K.

2013-01-01

University-industry (U-I) linkage is not a new concept. Although there are models for such linkage that have been tested or used, they may remain unsuitable in certain countries and communities. With the unique situation of the Palestinians, the existing models may fall short of meeting the specific needs and targets of establishing such a…

Production of anthocyanins in metabolically engineered microorganisms: Current status and perspectives.

PubMed

Zha, Jian; Koffas, Mattheos A G

2017-12-01

Microbial production of plant-derived natural products by engineered microorganisms has achieved great success thanks to large extend to metabolic engineering and synthetic biology. Anthocyanins, the water-soluble colored pigments found in terrestrial plants that are responsible for the red, blue and purple coloration of many flowers and fruits, are extensively used in food and cosmetics industry; however, their current supply heavily relies on complex extraction from plant-based materials. A promising alternative is their sustainable production in metabolically engineered microbes. Here, we review the recent progress on anthocyanin biosynthesis in engineered bacteria, with a special focus on the systematic engineering modifications such as selection and engineering of biosynthetic enzymes, engineering of transportation, regulation of UDP-glucose supply, as well as process optimization. These promising engineering strategies will facilitate successful microbial production of anthocyanins in industry in the near future.

Role-play and the Industrial Revolution: an STS approach to the teaching of steam engines

NASA Astrophysics Data System (ADS)

Sabka, Diego; Pereira de Pereira, Alexsandro; Lima Junior, Paulo

2016-11-01

Role-play is an interesting, although underexplored, way of teaching physics in high school. This paper presents a science-technology-society (STS) approach to the teaching of heat engines based on a role-play of the Industrial Revolution. Enacting the role-play, students are presented not only to scientific concepts, but also to the social and technological controversies of industrial development.

Renovation of a mechanical engineering senior design class to an industry-tied and team-oriented course

NASA Astrophysics Data System (ADS)

Liu, Yucheng

2017-11-01

In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became the most important course component and critical assessment tool, from which problem-solving skills as well as employability skills of the ME students can be fully developed. Hands-on experiences in finite element analysis (FEA) modelling and simulation were also added into the renovated curriculum to promote the application of FEA on engineering design and assessment. Evaluation of the renovated course was conducted using two instruments and the results have shown that the course made the ME senior students more prepared for their future career and a win-win model was created between the industry partner and the ME programme through it. Impact of the renovated syllabus on Accreditation Board for Engineering Technology goals was discussed. Based on the current progress, a more substantial change is being planned to further improve the effectiveness and practicability of this design course. The renovated course was started to offer to the ME senior students at Mississippi State University.

Preventive Effects of Safety Helmets on Traumatic Brain Injury after Work-Related Falls.

PubMed

Kim, Sang Chul; Ro, Young Sun; Shin, Sang Do; Kim, Joo Yeong

2016-10-29

Work-related traumatic brain injury (TBI) caused by falls is a catastrophic event that leads to disabilities and high socio-medical costs. This study aimed to measure the magnitude of the preventive effect of safety helmets on clinical outcomes and to compare the effect across different heights of fall. We collected a nationwide, prospective database of work-related injury patients who visited the 10 emergency departments between July 2010 and October 2012. All of the adult patients who experienced work-related fall injuries were eligible, excluding cases with unknown safety helmet use and height of fall. Primary and secondary endpoints were intracranial injury and in-hospital mortality. We calculated adjusted odds ratios (AORs) of safety helmet use and height of fall for study outcomes, and adjusted for any potential confounders. A total of 1298 patients who suffered from work-related fall injuries were enrolled. The industrial or construction area was the most common place of fall injury occurrence, and 45.0% were wearing safety helmets at the time of fall injuries. The safety helmet group was less likely to have intracranial injury comparing with the no safety helmet group (the adjusted odds ratios (ORs) (95% confidence interval (CI)): 0.42 (0.24-0.73)), however, there was no statistical difference of in-hospital mortality between two groups (the adjusted ORs (95% CI): 0.83 (0.34-2.03). In the interaction analysis, preventive effects of safety helmet on intracranial injury were significant within 4 m height of fall. A safety helmet is associated with prevention of intracranial injury resulting from work-related fall and the effect is preserved within 4 m height of fall. Therefore, wearing a safety helmet can be an intervention for protecting fall-related intracranial injury in the workplace.

Harnessing the Environmental Professional Expertise of Engineering Students—The Course: ``Environmental Management Systems in the Industry''

NASA Astrophysics Data System (ADS)

Ben-Zvi-Assaraf, Orit; Ayal, Nitzan

2010-12-01

More and more technical universities now advocate integrating sustainability in higher education and including it as a strategic goal for improving education's quality and relevance to society. This study examines 30 fourth-year chemical engineering students, graduates of a university course designed to combine their terminological domain with sustainability-oriented goals, focusing on topics like corporate sustainability, developing environmental policy, introduction to ISO 14001—Environmental Management Systems (EMS), and environmental legislation. The study explores their perception of industrial-environmental issues and asks—How did the study unit influence the students' ability to use their preexisting scientific knowledge, while relating to industrial-environmental issues? Our findings indicate that engineering students can develop industrial-environmental awareness, and make use of interdisciplinary knowledge beyond that strictly related to the realm of engineering. Regarding the research's particular aim—i.e. determining the study unit's influence on students' ability to relate industrial-environmental issues to their own field of engineering—the findings indeed show a change in the students' conceptions of environmental elements related to industry. The course graduates became more attentive to the environmental aspects associated with building and opening a factory, and the concepts they raised in connection with the topic gained in variety.

Human Body Interfacing.

ERIC Educational Resources Information Center

Fryda, Lawrence J.; Harrington, Robert; Szumal, Clint

Electronics Engineering Technology majors in the Industrial and Engineering Technology department at Central Michigan University have developed many real-world projects that represent the type of problem-solving projects encouraged by industry. Two projects that can be used by other educators as freestanding projects or as the core for further…

Applications of aerospace technology in the electric power industry

NASA Technical Reports Server (NTRS)

Johnson, F. D.; Heins, C. F.

1974-01-01

Existing applications of NASA contributions to disciplines such as combustion engineering, mechanical engineering, materials science, quality assurance and computer control are outlined to illustrate how space technology is used in the electric power industry. Corporate strategies to acquire relevant space technology are described.

Bioethanol production from cellulosic hydrolysates by engineered industrial Saccharomyces cerevisiae.

PubMed

Lee, Ye-Gi; Jin, Yong-Su; Cha, Young-Lok; Seo, Jin-Ho

2017-03-01

Even though industrial yeast strains exhibit numerous advantageous traits for the production of bioethanol, their genetic manipulation has been limited. This study demonstrates that an industrial polyploidy Saccharomyces cerevisiae JHS200 can be engineered through Cas9 (CRISPR associated protein 9)-based genome editing. Specifically, we generated auxotrophic mutants and introduced a xylose metabolic pathway into the auxotrophic mutants. As expected, the engineered strain (JX123) enhanced ethanol production from cellulosic hydrolysates as compared to other engineered haploid strains. However, the JX123 strain produced substantial amounts of xylitol as a by-product during xylose fermentation. Hypothesizing that the xylitol accumulation might be caused by intracellular redox imbalance from cofactor difference, the NADH oxidase from Lactococcus lactis was introduced into the JX123 strain. The resulting strain (JX123_noxE) not only produced more ethanol, but also produced xylitol less than the JX123 strain. These results suggest that industrial polyploidy yeast can be modified for producing biofuels and chemicals. Copyright © 2016 Elsevier Ltd. All rights reserved.

Metabolic engineering of Yarrowia lipolytica for industrial applications.

PubMed

Zhu, Quinn; Jackson, Ethel N

2015-12-01

Yarrowia lipolytica is a safe and robust yeast that has a history of industrial applications. Its physiological, metabolic and genomic characteristics have made it a superior host for metabolic engineering. The results of optimizing internal pathways and introducing new pathways have demonstrated that Y. lipolytica can be a platform cell factory for cost-effective production of chemicals and fuels derived from fatty acids, lipids and acetyl-CoA. Two products have been commercialized from metabolically engineered Y. lipolytica strains producing high amounts of omega-3 eicosapentaenoic acid, and more products are on the way to be produced at industrial scale. Here we review recent progress in metabolic engineering of Y. lipolytica for production of biodiesel fuel, functional fatty acids and carotenoids. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

DoD HPC Insights Fall 2016A publication of the Department of Defense High Performance Computing Modernization Program

DTIC Science & Technology

2016-09-01

HPCMP will continue to be a key resource in solving challenging problems for the Department of Defense . 1 Fall 2016 High-F idel i ty Simulat ions of...laser interactions. The group had studied plasma expansion experimentally, but this wasn’t sufficient to understand the problem . Feister adapted and...focused on increasing the efficiency of jet turbine engines and extending aircraft flight ranges by changing the shape (articulation) of the turbine

Technical Summary for 1993 Fall MRS Symposium O, ’Complex Fluids’

DTIC Science & Technology

1994-08-19

specific "lock-and-key" bine’ A ’ protein receptor and ligand molecules. Philippe Richetti [CRPP, BordeaL c .•c ,. d surface forces apparatus...Cameron Staticon Alexandria, Virginia 22304-6145 Plese find enclosed a copy of the Technical Summary for Symposium 0, "Complex Fluids", of the Fall...well as by Exxon Research and Engineering and Exxon Chemical Company. Sincerely, ,J kZ PhL \\PIC Scott Milner SM:pk Enc. c. D . J. Gillespie 0819940I.STM

Implementing a Standards Development Framework for the Coalition Battle Management Language

DTIC Science & Technology

2013-06-01

and M. Hieb, “Coalition Battle Management (C-BML) Study Group Report”, Paper 05F- SIW -041, Fall Simulation Interoperability Workshop Sept 2006. [3...J. Abbott, S. Levine, M. Pullen: “Answering The Question Why A BML Standard Has Taken So Long To Be Establishes?”, Fall 2011 SIW , Orlando USA. [4] K...Heffner et al., “A Systems Engineering Approach to M&S Standards Development: Application to the Coalition Battle Management Language”, 13S- SIW -002

Fall 2012 Graduate Engineering Internship Summary

NASA Technical Reports Server (NTRS)

Ehrlich, Joshua

2013-01-01

In the fall of 2012, I participated in the National Aeronautics and Space Administration (NASA) Pathways Intern Employment Program at the Kennedy Space Center (KSC) in Florida. This was my second internship opportunity with NASA, a consecutive extension from a summer 2012 internship. During my four-month tenure, I gained valuable knowledge and extensive hands-on experience with payload design and testing as well as composite fabrication for repair design on future space vehicle structures. As a systems engineer, I supported the systems engineering and integration team with the testing of scientific payloads such as the Vegetable Production System (Veggie). Verification and validation (V&V) of the Veggie was carried out prior to qualification testing of the payload, which incorporated a lengthy process of confirming design requirements that were integrated through one or more validatjon methods: inspection, analysis, demonstration, and testing. Additionally, I provided assistance in verifying design requirements outlined in the V&V plan with the requirements outlined by the scientists in the Science Requirements Envelope Document (SRED). The purpose of the SRED was to define experiment requirements intended for the payload to meet and carry out.

Occupational Safety and Health Professionals

ERIC Educational Resources Information Center

Wash, Pat

1975-01-01

The growing concern for safety in both the workplace and in consumer products will create many new jobs through the mid-1980's--especially in private industry. The largest number of safety professionals are safety engineers; others include fire protection engineers, industrial hygienists, loss control and occupational health consultants, and…

Promoting Interdisciplinarity in Engineering Teaching

ERIC Educational Resources Information Center

Harrison, Gareth P.; Macpherson, D. Ewen; Williams, David A.

2007-01-01

With funding from the UK's Royal Academy of Engineering, the University of Edinburgh has developed a series of truly interdisciplinary design courses aimed at improving penultimate-year students' ability to operate across disciplines and improve their preparation for industry. Led by a Visiting Industrial Professor, the course on hydropower design…

Photonics engineering: snapshot applications in healthcare, homeland security, agriculture, and industry

NASA Astrophysics Data System (ADS)

Sumriddetchkajorn, Sarun

2015-01-01

Throughout my experience in photonics engineering, this article shows that photonics is indeed a key technology enabler for enhancing our competitiveness. In particular, I snapshot the achievements of NECTEC research teams in implementing devices and systems suitable for healthcare, homeland security, agriculture, and industry.

Toward Mass Customization in the Age of Information: The Case for Open Engineering Systems

NASA Technical Reports Server (NTRS)

Simpson, Timothy W.; Lautenschlager, Uwe; Mistree, Farrokh

1997-01-01

In the Industrial Era, manufacturers used "dedicated" engineering systems to mass produce their products. In today's increasingly competitive markets, the trend is toward mass customization, something that becomes increasingly feasible when modern information technologies are used to create open engineering systems. Our focus is on how designers can provide enhanced product flexibility and variety (if not fully customized products) through the development of open engineering systems. After presenting several industrial examples, we anchor our new systems philosophy with two real engineering applications. We believe that manufacturers who adopt open systems will achieve competitive advantage in the Information Age.

Tissue engineering and regenerative medicine: manufacturing challenges.

PubMed

Williams, D J; Sebastine, I M

2005-12-01

Tissue engineering and regenerative medicine are interdisciplinary fields that apply principles of engineering and life sciences to develop biological substitutes, typically composed of biological and synthetic components, that restore, maintain or improve tissue function. Many tissue engineering technologies are still at a laboratory or pre-commercial scale. The short review paper describes the most significant manufacturing and bio-process challenges inherent in the commercialisation and exploitation of the exciting results emerging from the biological and clinical laboratories exploring tissue engineering and regenerative medicine. A three-generation road map of the industry has been used to structure a view of these challenges and to define where the manufacturing community can contribute to the commercial success of the products from these emerging fields. The first-generation industry is characterised by its demonstrated clinical applications and products in the marketplace, the second is characterised by emerging clinical applications, and the third generation is characterised by aspirational clinical applications. The paper focuses on the cost reduction requirement of the first generation of the industry to allow more market penetration and consequent patient impact. It indicates the technological requirements, for instance the creation of three-dimensional tissue structures, and value chain issues in the second generation of the industry. The third-generation industry challenges lie in fundamental biological and clinical science. The paper sets out a road map of these generations to identify areas for research.

Common Analysis Tool Being Developed for Aeropropulsion: The National Cycle Program Within the Numerical Propulsion System Simulation Environment

NASA Technical Reports Server (NTRS)

Follen, Gregory J.; Naiman, Cynthia G.

1999-01-01

The NASA Lewis Research Center is developing an environment for analyzing and designing aircraft engines-the Numerical Propulsion System Simulation (NPSS). NPSS will integrate multiple disciplines, such as aerodynamics, structure, and heat transfer, and will make use of numerical "zooming" on component codes. Zooming is the coupling of analyses at various levels of detail. NPSS uses the latest computing and communication technologies to capture complex physical processes in a timely, cost-effective manner. The vision of NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Through the NASA/Industry Cooperative Effort agreement, NASA Lewis and industry partners are developing a new engine simulation called the National Cycle Program (NCP). NCP, which is the first step toward NPSS and is its initial framework, supports the aerothermodynamic system simulation process for the full life cycle of an engine. U.S. aircraft and airframe companies recognize NCP as the future industry standard common analysis tool for aeropropulsion system modeling. The estimated potential payoff for NCP is a $50 million/yr savings to industry through improved engineering productivity.

What`s available in industrial vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holzhauer, R.

A large assortment of material handling vehicles are available for transporting and lifting products. Equipment is offered with electric (battery) and internal combustion power, operator walking alongside or riding, and inside or outside applications. Factors such as load capacity, turning radius, aisle width, travel speed, lifting height, controls, and cost also enter the selection equation. The various types of vehicles serving the industrial truck market are broken into seven classes, according to guidelines established by the Industrial Truck Association (ITA). This association deals with issues of common interests to manufacturers of fork lifts, tow tractors, rough terrain vehicles, hand palletmore » trucks, automated guided vehicles, and their suppliers; develops voluntary engineering practices; and collects and disseminates statistical information relating to the industrial truck marketplace. The seven classes are: Electric Motor Rider Trucks; Electric Motor Narrow Aisle Trucks; Electric Motor Hand Trucks; Internal Combustion Engine Trucks, cushion tired; Internal Combustion Engine Trucks, pneumatic tired; Electric and Internal Combustion Engine Tractors; and Rough Terrain Fork Lift Trucks. The following pages present a descriptive and pictorial overview of the equipment available in the first five vehicle classes. The last two categories are not covered because of their limited industrial use.« less

From protein engineering to immobilization: promising strategies for the upgrade of industrial enzymes.

PubMed

Singh, Raushan Kumar; Tiwari, Manish Kumar; Singh, Ranjitha; Lee, Jung-Kul

2013-01-10

Enzymes found in nature have been exploited in industry due to their inherent catalytic properties in complex chemical processes under mild experimental and environmental conditions. The desired industrial goal is often difficult to achieve using the native form of the enzyme. Recent developments in protein engineering have revolutionized the development of commercially available enzymes into better industrial catalysts. Protein engineering aims at modifying the sequence of a protein, and hence its structure, to create enzymes with improved functional properties such as stability, specific activity, inhibition by reaction products, and selectivity towards non-natural substrates. Soluble enzymes are often immobilized onto solid insoluble supports to be reused in continuous processes and to facilitate the economical recovery of the enzyme after the reaction without any significant loss to its biochemical properties. Immobilization confers considerable stability towards temperature variations and organic solvents. Multipoint and multisubunit covalent attachments of enzymes on appropriately functionalized supports via linkers provide rigidity to the immobilized enzyme structure, ultimately resulting in improved enzyme stability. Protein engineering and immobilization techniques are sequential and compatible approaches for the improvement of enzyme properties. The present review highlights and summarizes various studies that have aimed to improve the biochemical properties of industrially significant enzymes.

Engineering students' sustainability approaches

NASA Astrophysics Data System (ADS)

Haase, S.

2014-05-01

Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The empirical base of the article is a nation-wide, web-based survey sent to all newly enrolled engineering students in Denmark commencing their education in the fall term 2010. The response rate was 46%. The survey focused on a variety of different aspects of what can be conceived as sustainability. By means of cluster analysis, three engineering student approaches to sustainability are identified and described. The article provides knowledge on the different prerequisites of engineering students in relation to the role of sustainability in engineering. This information is important input to educators trying to target new engineering students and contribute to the provision of engineers equipped to meet sustainability challenges.

A Case Study of an Academia-Industry Partnership to Meet the Education and Training Needs in a Science, Technology, Engineering & Mathematics (STEM) Field

ERIC Educational Resources Information Center

Richardson, Joseph Carl

2013-01-01

The purpose of this case study is to provide a description of the characteristics of an academia-industry partnership that works together with industry to meet the education and training needs in a Science, Technology, Engineering, and Mathematics (STEM) field. After the launch of Sputnik in 1957, U.S. pursued efforts to compete in STEM fields on…

Genetic engineering applied to agriculture has a long row to hoe.

PubMed

Miller, Henry I

2018-01-02

In spite of the lack of scientific justification for skepticism about crops modified with molecular techniques of genetic engineering, they have been the most scrutinized agricultural products in human history. The assumption that "genetically engineered" or "genetically modified" is a meaningful - and dangerous - classification has led to excessive and dilatory regulation. The modern molecular techniques are an extension, or refinement, of older, less precise, less predictable methods of genetic modification, but as long as today's activists and regulators remain convinced that so called "GMOs" represent a distinct and dangerous category of research and products, genetic engineering will fall short of its potential.

Training in software used by practising engineers should be included in university curricula

NASA Astrophysics Data System (ADS)

Silveira, A.; Perdigones, A.; García, J. L.

2009-04-01

Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors," IEEE Trans. Educ., vol. 45, pp. 50- 56, Feb. 2002. [3] I. Vélez, and J. F. Sevillano, "A course to train digital hardware designers for industry," IEEE Trans. Educ., vol. 50, pp. 236-243, Aug. 2007. Acknowledgement: This work was supported in part by the Universidad Politécnica de Madrid, Spain.

25. AERIAL VIEW LOOKING NORTHWEST SHOWING (from left) CONGDON, PHOENIX, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. AERIAL VIEW LOOKING NORTHWEST SHOWING (from left) CONGDON, PHOENIX, HARMONY, AND INDUSTRY MILLS, AND PUBLIC SERVICE ELECTRIC CO. - Great Falls S. U. M. Historic District, Oliver Street, Paterson, Passaic County, NJ

13 CFR 124.403 - How is a business plan updated and modified?

Code of Federal Regulations, 2011 CFR

2011-01-01

... aggregate dollar value of 8(a) contracts to be sought, broken down by sole source and competitive... primary industry classification falls within that Major Group. Any adjustment will take into account...

Air Pollution and Industry.

ERIC Educational Resources Information Center

Ross, R. D., Ed.

This book is an authoritative reference and practical guide designed to help the plant engineer identify and solve industrial air pollution problems in order to be able to meet current air pollution regulations. Prepared under the editorial supervision of an experienced chemical engineer, with each chapter contributed by an expert in his field,…

Converting waste gases from pulp mills into value-added chemicals

EPA Science Inventory

Engineering, Miami University, 64 J Engineering Building, Oxford, OH, 45056 The pulp and paper industry generates large amounts of HAPs, VOCs and total reduced sulfur compounds (TRSs) of the various sources. As the industry is moving to a sustainable future, the U.S. EPA and Mia...

Information Literacy for First-Year Students: An Embedded Curriculum Approach

ERIC Educational Resources Information Center

Andrews, T.; Patil, R.

2007-01-01

The ability to access, evaluate and synthesise high-quality research material is the backbone of critical thinking in academic and professional contexts for Engineers and Industrial Designers. This is the premise upon which teaching and library staff developed Information Literacy (IL) components in Engineering & Industrial Design Practice--a…

Innovative University-Industry-Government Collaboration. Six Case Studies from the USA.

ERIC Educational Resources Information Center

Dryden, R. D.; Erzurumlu, H. C. M.

1996-01-01

University-industry-government collaborations face challenges that necessitate a new culture or mindset. Six U.S. case examples demonstrate ways to create a win-win-win scenario and sustain partnerships: Oregon Joint Graduate Schools of Engineering; Network for Engineering and Research in Oregon; Blacksburg Electronic Village; research…

Industrial Work Placement in Higher Education: A Study of Civil Engineering Student Engagement

ERIC Educational Resources Information Center

Tennant, Stuart; Murray, Mike; Gilmour, Bob; Brown, Linda

2018-01-01

For civil engineering undergraduates, short-term industrial work placement provides an invaluable learning experience. Notwithstanding the near-universal endorsement of short-term placement programmes, the resulting experience is rarely articulated through the student voice. This article provides an analysis of 174 questionnaires returned by…

University/government/industry relations in aeronautics

NASA Technical Reports Server (NTRS)

Schairer, G. S.

1975-01-01

Methods for improving the relationships between universities, the aircraft industry, and the Government are proposed. The author submits nine specific recommendations aimed at more effective aeronautical engineering education and employment of graduate engineers. The need for improved communication between the organizations which influence the advancement of aeronautical sciences is stressed.

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2010 CFR

2010-01-01

...; educational and training services; engineering, architectural, and surveying services; financial services (purchases only, by companies or parts of companies that are not financial services providers); industrial engineering services; industrial-type maintenance, installation, alteration, and training services; legal...

Industrial Sponsor Perspective on Leveraging Capstone Design Projects to Enhance Their Business

ERIC Educational Resources Information Center

Weissbach, Robert S.; Snyder, Joseph W.; Evans, Edward R., Jr.; Carucci, James R., Jr.

2017-01-01

Capstone design projects have become commonplace among engineering and engineering technology programs. These projects are valuable tools when assessing students, as they require students to work in teams, communicate effectively, and demonstrate technical competency. The use of industrial sponsors enhances these projects by giving these projects…

46 CFR 107.231 - Inspection for certification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... chapter, Electrical Engineering; 1 1 Requirements for industrial systems and components are in Subpart 111.94 of this chapter. (3) Subchapter F of this chapter, Marine Engineering; 2 2 Requirements for industrial systems and components are in Subpart 58.60 of this chapter. (4) Subchapter E of this chapter...

46 CFR 107.231 - Inspection for certification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... chapter, Electrical Engineering; 1 1 Requirements for industrial systems and components are in Subpart 111.94 of this chapter. (3) Subchapter F of this chapter, Marine Engineering; 2 2 Requirements for industrial systems and components are in Subpart 58.60 of this chapter. (4) Subchapter E of this chapter...

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2011 CFR

2011-01-01

...; educational and training services; engineering, architectural, and surveying services; financial services (purchases only, by companies or parts of companies that are not financial services providers); industrial engineering services; industrial-type maintenance, installation, alteration, and training services; legal...

46 CFR 107.231 - Inspection for certification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... chapter, Electrical Engineering; 1 1 Requirements for industrial systems and components are in Subpart 111.94 of this chapter. (3) Subchapter F of this chapter, Marine Engineering; 2 2 Requirements for industrial systems and components are in Subpart 58.60 of this chapter. (4) Subchapter E of this chapter...

46 CFR 107.231 - Inspection for certification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... chapter, Electrical Engineering; 1 1 Requirements for industrial systems and components are in Subpart 111.94 of this chapter. (3) Subchapter F of this chapter, Marine Engineering; 2 2 Requirements for industrial systems and components are in Subpart 58.60 of this chapter. (4) Subchapter E of this chapter...

46 CFR 107.231 - Inspection for certification.

Code of Federal Regulations, 2012 CFR

2012-10-01

... chapter, Electrical Engineering; 1 1 Requirements for industrial systems and components are in Subpart 111.94 of this chapter. (3) Subchapter F of this chapter, Marine Engineering; 2 2 Requirements for industrial systems and components are in Subpart 58.60 of this chapter. (4) Subchapter E of this chapter...

Continuous Improvement in the Industrial and Management Systems Engineering Programme at Kuwait University

ERIC Educational Resources Information Center

Aldowaisan, Tariq; Allahverdi, Ali

2016-01-01

This paper describes the process employed by the Industrial and Management Systems Engineering programme at Kuwait University to continuously improve the programme. Using a continuous improvement framework, the paper demonstrates how various qualitative and quantitative analyses methods, such as hypothesis testing and control charts, have been…

78 FR 19530 - RG Steel Sparrows Point LLC, Formerly Known as Severstal Sparrows Point LLC, a Subsidiary of RG...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-01

..., Alliance Engineering, Inc., Washington Group International, Javan & Walter, Inc., Kinetic Technical... Consulting, Crown Security, Eastern Automation, EDS (HP), TekSystems, URS Corporation, B More Industrial... Service Company, Sun Associated Industries, Inc., MPI Consultants LLC, Alliance Engineering, Inc...

Personal Study Planning in Doctoral Education in Industrial Engineering

ERIC Educational Resources Information Center

Lahenius, K.; Martinsuo, M.

2010-01-01

The duration of doctoral studies has increased in Europe. Personal study planning has been considered as one possible solution to help students in achieving shorter study times. This study investigates how doctoral students experience and use personal study plans in one university department of industrial engineering. The research material…

77 FR 24587 - Addition of Certain Persons to the Entity List; and Implementation of Entity List Annual Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

...; --Mahtab Technical Engineering Company; --Composite Propellant Missile Industry; and --Sanaye Sokhte... entity; 0 (i) By removing the ``Country'' column for South Korea, including the South Korean entity... Technical Engineering Company;. --Composite Propellant Missile Industry; and. --Sanaye Sokhte Morakab (SSM...

75 FR 68327 - Certain Welded Carbon Steel Standard Pipes and Tubes From India: Rescission of Antidumping Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... Lloyds Metals & Engineers Ltd. and Lloyds Steel Industries Ltd.) (collectively, Lloyds) and Ushdev... and all affiliates, Lloyds Metals & Engineers Ltd., and Lloyds Steel Industries Ltd. Because we... DEPARTMENT OF COMMERCE International Trade Administration [A-533-502] Certain Welded Carbon Steel...

Bacteria engineered for fuel ethanol production: current status

Treesearch

B.S. Dien; M.A. Cotta; T.W. Jeffries

2003-01-01

The lack of industrially suitable microorganisms for converting biomass into fuel ethanol has traditionally been cited as a major technical roadblock to developing a bioethanol industry. In the last two decades, numerous microorganisms have been engineered to selectively produce ethanol. Lignocellulosic biomass contains complex carbohydrates that necessitate utilizing...

Engineering industrial oil biosynthesis: cloning and characterization of Kennedy pathway acyltransferases from novel oilseed species

USDA-ARS?s Scientific Manuscript database

For more than twenty years, various industrial, governmental, and academic laboratories have developed and refined genetic engineering strategies aimed at manipulating lipid metabolism in plants and microbes. The goal of these projects is to produce renewable specialized oils that can effectively c...

Sub-Saharan Africa Report

DTIC Science & Technology

1987-03-11

food and beverage industry — began falling away. To solve its dilemma, Research turned to a business sector that was coping with the recession. It...These involve such areas as fishing, agriculture, industry , trade, tourism , etc. In Burkina the strategic objective of SOBAIAP is the achievement of...quantity of consumer goods and food products placed on the market grew by about 30 percent. He added, however, that the goals of the plan for 1986 were

The rise and fall of the world's first fat tax.

PubMed

Bødker, Malene; Pisinger, Charlotta; Toft, Ulla; Jørgensen, Torben

2015-06-01

In 2011, Denmark introduced the world's first tax on saturated fat, but only 15 months later the fat tax was abolished. The aim of this article is to investigate the political processes surrounding the implementation and rapid abolition of the fat tax. Our findings suggest that industry and trade associations were heavily involved in the political process of formulating the fat tax. Industry representatives used certain tactics to oppose the fat tax: threatening lawsuits, predicting welfare losses, casting doubt on evidence, diverting focus and requesting postponement. After the fat tax was implemented, the food industry continued their opposition through intensified lobbyism and juridical actions at EU level. However, other factors seem to have contributed to the fall of the fat tax. The tax received criticism for being poorly designed and gradually lost popularity among health professionals, politicians and the public. In the end, the fat tax was abolished for financial reasons. This study demonstrates how politicians considered the fat tax as a funding source rather than a public health initiative, which resulted in significant shortcomings. Furthermore, we demonstrate that the massive influence by industry stakeholders was not balanced with inputs from public health professionals, who should assume a more proactive role in policy-making. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

External cause-specific summaries of occupational fatal injuries. Part II: an analysis of years of potential life lost.

PubMed

Bailer, A John; Bena, James F; Stayner, Leslie T; Halperin, William E; Park, Robert M

2003-03-01

Fatal injury surveillance data provide an opportunity to assess the impact of occupational injuries and may indicate which industries or occupations are appreciably more hazardous than others, and thus should be given priority in public health intervention. Fatalities from the National Traumatic Occupational Fatality surveillance system served as the basis for examining external cause (E-code) specific impact summaries. Years of potential life lost (YPLL) were calculated for fatal injuries in the years 1983-1994. Industries and occupations were compared with respect to frequency of fatal injuries. In addition, injuries in categories of external causes are examined across all industries and occupations. Machinery, electric current, homicide, falls, and transportation-related are the external cause groups highlighted by high frequency/rate of occurrence. Electric current event groups are also characterized by high average YPLL. Poisoning, conflagration, and lightning were also identified in several occupations as having high associated average YPLL. The external-cause-specific analysis of average YPLL identified industries and occupations where, on average, younger workers were dying in fatal injuries. Noteworthy in this assessment were homicides and falls. The YPLL measure coupled with more commonly employed indices (e.g., rates) may provide a fuller description of the impact of occupational fatal injuries.

Computer Engineers.

ERIC Educational Resources Information Center

Moncarz, Roger

2000-01-01

Looks at computer engineers and describes their job, employment outlook, earnings, and training and qualifications. Provides a list of resources related to computer engineering careers and the computer industry. (JOW)

Predictors of effective leadership in industry - should engineering education focus on traditional intelligence, personality, or emotional intelligence?

NASA Astrophysics Data System (ADS)

Lappalainen, Pia

2015-03-01

Despite the changing global and industrial conditions requiring new approaches to leadership, management training as part of higher engineering education still remains understudied. The subsequent gap in engineering education calls for research on today's leader requirements and pedagogy supporting the inclusion of management competence in higher engineering education. Previous organisation and management studies have, on a general level, established the importance of managerial qualities for industrial performance, but the nature and make-up of these qualifications has not been adequately analysed. To fill the related research gap, the present work embarked on a quantitative empirical effort to identify predictors of successful leadership in engineering. In particular, this study investigated relationships between perceived leader performance and three dimensions of managerial capability: (1) mathematical-logical intelligence, (2) personality, and (3) socio-emotional intelligence. This work complemented previous research by resorting to both self-reports and other-reports: the results acquired from the managerial sample were compared to subordinate perceptions as measured through an emotive intelligence other-report and a general managerial competence multi-source appraisal. The sample comprised 80 superiors and 354 subordinates operating in seven organisations in engineering industries. The results from the quantitative measurements signalled the strongest correlation for socio-emotional intelligence and certain personality dimensions with successful leadership. Mathematical-logical intelligence demonstrated no correlation with subordinate perceptions of good leadership. These findings lay the foundation for the incorporation of socio-emotive skills into higher engineering education.

The Industrial Property Rights Education in Collaboration with the Creative Product Design Education

NASA Astrophysics Data System (ADS)

Tokoro, Tetsuro; Habuchi, Hitoe; Chonan, Isao

Recently, the Advanced Courses of Electronic System Engineering and Architecture and Civil Engineering of Gifu National College of Technology have introduced a creative subject, “Creative Engineering Practice”. In this subject, students study intellectual property rights. More specifically, they learn and practice industrial proprietary rights, procedures for obtaining a patent right, how to use Industrial Property Digital Library and so forth, along with the practice of creative product design. The industrial property rights education in collaboration with the creative product design education has been carried out by the cooperation of Japan Patent Office, Japan Institute of Invention and Innovation and a patent attorney. Through the instruction of the cooperative members, great educative results have been obtained. In this paper, we will describe the contents of the subject together with its items to pursue an upward spiral of progress.

Making aerospace technology work for the automotive industry - Introduction

NASA Technical Reports Server (NTRS)

Olson, W. T.

1978-01-01

In many cases it has been found that advances made in one technical field can contribute to other fields. An investigation is in this connection conducted concerning subjects from contemporary NASA programs and projects which might have relevance and potential usefulness to the automotive industry. Examples regarding aerospace developments which have been utilized by the automotive industry are related to electronic design, computer systems, quality control experience, a NASA combustion scanner and television display, exhaust gas analyzers, and a device for suppressing noise propagated through ducts. Projects undertaken by NASA's center for propulsion and power research are examined with respect to their value for the automotive industry. As a result of some of these projects, a gas turbine engine and a Stirling engine might each become a possible alternative to the conventional spark ignition engine.

Technological Nocturne: The Lisbon Industrial Institute and Romantic Engineering (1849-1888).

PubMed

Saraiva, Tiago; De Matos, Ana Cardoso

This article explores technology as romantic culture in the second half of the nineteenth century. It details how new urban nocturnal experiences emerged from the Lisbon Industrial Institute (Instituto Industrial) founded in 1852. It combines the interest in the space of science production, typical of history of science and science studies, with the attention to production and consumption of lighting more commonly found in history of technology and urban history literature. Engineers' practices are put in a cultural continuum with poetry, opera, and modern city life at large. Industrial Institute directors Vitorino Damásio and Fonseca Benevides are described as romantic engineers for whom technology overcame differences between humans through the forging of new social bonds, produced new aesthetic experiences and new ways of feeling, expressed nature's harmony, and led to heroic lives.

A national safety stand-down to reduce construction worker falls.

PubMed

Bunting, Jessica; Branche, Christine; Trahan, Chris; Goldenhar, Linda

2017-02-01

Falls are the leading cause of death and third leading cause of non-fatal injuries in construction. In an effort to combat these numbers, The National Campaign to Prevent Falls in Construction began in April 2012. As the campaign gained momentum, a week called the National Safety Stand-Down to Prevent Falls was launched to draw attention to the campaign and its goals. The purpose of this paper is to examine the reach of the Stand-Down and lessons learned from its implementation. The Occupational Safety & Health Administration offered a certificate of participation during the Stand-Down. To print the certificate, respondents provided information about their company and stand-down event. CPWR - The Center for Construction Research and Training conducted analyses on the data collected to assess reach and extent of participation. In 2014, 4,882 stand-downs were reported. The total number reported in 2015 was 3,759. The number of participants, however, increased from 770,193 in 2014 to 1,041,307 in 2015. The Stand-Down successfully reached the construction industry and beyond. Respondents were enthusiastic and participated nationally and internationally in variety of activities. They also provided significant feedback that will be influential in future campaign planning. Numbers of Stand-Downs and participants for both years are estimated to be substantially higher than the data recorded from the certificate database. While we cannot determine impact, the reach of the Stand-Down has surpassed expectations. The data gathered provide support for the continuation of the Stand-Down. Campaign planners incorporated findings into future Stand-Down planning, materials creation, and promotion. This analysis also provides insight on how organizations can partner to create targeted national campaigns that include activities stakeholders in the construction industry respond to, and can be used to replicate our efforts for other safety and health initiatives in construction and other industries. Copyright © 2016 National Safety Council and Elsevier Ltd. All rights reserved.

Publications - PDF 99-24D | Alaska Division of Geological & Geophysical

Science.gov Websites

Alaska's Mineral Industry Reports AKGeology.info Rare Earth Elements WebGeochem Engineering Geology Alaska ; Engineering; Engineering Geologic Map; Engineering Geology; Geologic Map; Geology; Land Subsidence; Landslide

Tunneling : the State of the Industry

DOT National Transportation Integrated Search

1976-05-01

Tunneling is examined as an industry. The demand for its services, the makeup of the industry, some history and its problems and prospects, are analyzed. Industry participants are listed: owners, engineer firms, tunnel builders and specialized suppli...

Research on flux of dry atmospheric falling dust and its characterization in a subtropical city, Guangzhou, South China.

PubMed

Zhao, Jinping; Peng, Ping'an; Song, Jianzhong; Ma, Shexia; Sheng, Guoying; Fu, Jiamo

2010-09-01

Guangzhou is the central city in the Pearl River Delta (PRD), China, and is one of the most polluted cities in the world. To characterize the ambient falling dust pollution, two typical sampling sites: urban (Wushan) and suburban (University Town) areas in Guangzhou city were chosen for falling dust collection over 1 year at time intervals of 1 or 2 months. The flux of dry deposition was calculated. In addition, mineral composition and morphology of atmospheric falling dust were studied by X-ray diffraction, scanning electron microscopy, and microscopic observation. The results revealed that the dust flux in Guangzhou city was 3.34-3.78 g/(m(2) month) during the study period. The main minerals in the dust were quartz, illite, calcite, kaolinite, gypsum, plagioclase, dolomite, and amorphous matter. The morphological types included grained and flaky individual minerals, chain-like aggregates, spherical flying beads, and irregular aggregates, with the chain-like and spherical aggregates indicators of industrial ash. The major dusts were derived from industrial and construction activities. The gypsum present in the dust collected in winter season was not only derived from cement dust but may also have originated from the reaction of calcic material with sulfuric acids resulting from photooxidation of SO(x) and NO(x), which confirmed serious air pollution due to SO(x) and NO(x) in Guangzhou. The abatement of fossil fuel combustion emissions and construction dust will have a significant beneficial effect on dust reduction.

Automotive Stirling Engine Development Program

NASA Technical Reports Server (NTRS)

Nightingale, N.; Ernst, W.; Richey, A.; Simetkosky, M.; Smith, G.; Rohdenburg, C.; Antonelli, M. (Editor)

1983-01-01

Program status and plans are discussed for component and technology development; reference engine system design, the upgraded Mod 1 engine; industry test and evaluation; and product assurance. Four current Mod 1 engines reached a total of 2523 operational hours, while two upgraded engines accumulated 166 hours.

Developing a new industrial engineering curriculum using a systems engineering approach

NASA Astrophysics Data System (ADS)

Buyurgan, Nebil; Kiassat, Corey

2017-11-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have been identified, and some preliminary analysis on their needs and requirements has been conducted. Following that, the phases of conceptual design, preliminary design, and detailed design have been pursued during which different levels of validation, assessment, and evaluation processes have been utilised. In addition, a curriculum assessment and continuous improvement process have been developed to assess the curriculum and the courses frequently. The resulting curriculum is flexible, allowing the pursuit of accelerated graduate programmes, a second major, various minor options, and study-abroad; relevant, tailored to the needs of industry partners in the vicinity; and practical, providing hands-on education, resulting in employment-ready graduates.

DEM GPU studies of industrial scale particle simulations for granular flow civil engineering applications

NASA Astrophysics Data System (ADS)

Pizette, Patrick; Govender, Nicolin; Wilke, Daniel N.; Abriak, Nor-Edine

2017-06-01

The use of the Discrete Element Method (DEM) for industrial civil engineering industrial applications is currently limited due to the computational demands when large numbers of particles are considered. The graphics processing unit (GPU) with its highly parallelized hardware architecture shows potential to enable solution of civil engineering problems using discrete granular approaches. We demonstrate in this study the pratical utility of a validated GPU-enabled DEM modeling environment to simulate industrial scale granular problems. As illustration, the flow discharge of storage silos using 8 and 17 million particles is considered. DEM simulations have been performed to investigate the influence of particle size (equivalent size for the 20/40-mesh gravel) and induced shear stress for two hopper shapes. The preliminary results indicate that the shape of the hopper significantly influences the discharge rates for the same material. Specifically, this work shows that GPU-enabled DEM modeling environments can model industrial scale problems on a single portable computer within a day for 30 seconds of process time.

Current status of nuclear engineering education

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palladino, N.J.

1975-09-01

The 65 colleges and universities offering undergraduate degrees in nuclear engineering and the 15 schools offering strong nuclear engineering options are, in general, doing a good job to meet the current spectrum of job opportunities. But, nuclear engineering programs are not producing enough graduates to meet growing demands. They currently receive little aid and support from their customers --industry and government--in the form of scholarships, grants, faculty research support, student thesis and project support, or student summer jobs. There is not enough interaction between industry and universities. Most nuclear engineering programs are geared too closely to the technology of themore » present family of reactors and too little to the future breeder reactors and controlled thermonuclear reactors. In addition, nuclear engineering programs attract too few women and members of minority ethnic groups. Further study of the reasons for this fact is needed so that effective corrective action can be taken. Faculty in nuclear engineering programs should assume greater initiative to provide attractive and objective nuclear energy electives for technical and nontechnical students in other disciplines to improve their technical understanding of the safety and environmental issues involved. More aggressive and persistent efforts must be made by nuclear engineering schools to obtain industry support and involvement in their programs. (auth)« less

Systems Engineering Workshops | Wind | NREL

Science.gov Websites

Workshops Systems Engineering Workshops The Wind Energy Systems Engineering Workshop is a biennial topics relevant to systems engineering and the wind industry. The presentations and agendas are available for all of the Systems Engineering Workshops: The 1st NREL Wind Energy Systems Engineering Workshop

Human Resource Development and New Technology in the Automobile Industry: A Case Study of Ford Motor Company's Dearborn Engine Plant. The Development and Utilization of Human Resources in the Context of Technological Change and Industrial Restructuring.

ERIC Educational Resources Information Center

Chen, Kan; And Others

This report centers around a plant-level study of the development and utilization of human resources in the context of technological change and industrial restructuring in the crankshaft production area of Ford Motor Company's Dearborn Engine Plant (DEP). The introductory chapter describes how the study was conducted, provides an introduction to…

Visiting Professorships

NASA Astrophysics Data System (ADS)

Applications are now being accepted for the National Science Foundation (NSF) Visiting Professorships for Women Program. Under this program, women scientists and engineers from industry, government, and academia can be visiting professors at academic institutions in the United States.The program's objectives are to provide opportunities for women to advance their careers in the disciplines of science and engineering that are supported by NSF to provide greater visibility and wider opportunities for women scientists and engineers employed in industry, government, and academic institutions, and to provide encouragement for other women to pursue careers in science and engineering through the awardees' research, lecturing, counseling, and mentoring activities.

Recent advances and versatility of MAGE towards industrial applications.

PubMed

Singh, Vijai; Braddick, Darren

2015-12-01

The genome engineering toolkit has expanded significantly in recent years, allowing us to study the functions of genes in cellular networks and assist in over-production of proteins, drugs, chemicals and biofuels. Multiplex automated genome engineering (MAGE) has been recently developed and gained more scientific interest towards strain engineering. MAGE is a simple, rapid and efficient tool for manipulating genes simultaneously in multiple loci, assigning genetic codes and integrating non-natural amino acids. MAGE can be further expanded towards the engineering of fast, robust and over-producing strains for chemicals, drugs and biofuels at industrial scales.

A factual survey of automobile usage

DOT National Transportation Integrated Search

1941-01-01

In anticipation of the problems in civilian transportation that the : defense effort would bring to the motor vehicle user, to business and industry, and to Government, the Automobile Manufacturers Association in the fall of 1940 undertook a factual ...

Klamath Falls: High-Power Acoustic Well Stimulation Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Brian

Acoustic well stimulation (AWS) technology uses high-power sonic waves from specific frequency spectra in an attempt to stimulate production in a damaged or low-production wellbore. AWS technology is one of the most promising technologies in the oil and gas industry, but it has proven difficult for the industry to develop an effective downhole prototype. This collaboration between Klamath Falls Inc. and the Rocky Mountain Oilfield Testing Center (RMOTC) included a series of tests using high-power ultrasonic tools to stimulate oil and gas production. Phase I testing was designed and implemented to verify tool functionality, power requirements, and capacity of high-powermore » AWS tools. The purpose of Phase II testing was to validate the production response of wells with marginal production rates to AWS stimulation and to capture and identify any changes in the downhole environment after tool deployment. This final report presents methodology and results.« less

Dry and stable excavations in limestones of the greater Kansas City area of Missouri and Kansas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goebel, E.D.; Parizek, E.J.; Stauffer, T.P.

In the Greater Kansas City area of Missouri and Kansas the bedrock consists largely of a thick sequence of limestone and shale formations of Pennsylvanian age. Three formations are of interest in this report. The Swope Formation contains the Bethany Falls Limestone, the Wyandotte Formation contains the Argentine Limestone and the Farley Limestone, and the Oread Formation contains the Plattsmouth Limestone. Underground workings have been developed by industry in these three formations for a variety of uses, including factories, offices and warehouses. The Bethany Falls Limestone is the unit most widely developed for secondary underground use. The industries which design,more » excavate, and occupy this man-made underground space consider it to be essentially dry and stable. Identification and description of the geologic, topographic, hydrologic, and possible other unique features which allow this operational decision is the primary goal of this investigation.« less

48 CFR 9904.403-60 - Illustrations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... personnel, labor hours, payroll, number of hires. 2. Manufacturing policies, (quality control, industrial engineering, production, scheduling, tooling, inspection and testing, etc 2. Manufacturing cost input, manufacturing direct labor. 3. Engineering policies 3. Total engineering costs, engineering direct labor, number...

48 CFR 9904.403-60 - Illustrations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... personnel, labor hours, payroll, number of hires. 2. Manufacturing policies, (quality control, industrial engineering, production, scheduling, tooling, inspection and testing, etc 2. Manufacturing cost input, manufacturing direct labor. 3. Engineering policies 3. Total engineering costs, engineering direct labor, number...