Thermo-mechanical Fatigue Failure of Thermal Barrier Coated Superalloy Specimen

NASA Astrophysics Data System (ADS)

Subramanian, Rajivgandhi; Mori, Yuzuru; Yamagishi, Satoshi; Okazaki, Masakazu

2015-09-01

Failure behavior of thermal barrier coated (TBC) Ni-based superalloy specimens were studied from the aspect of the effect of bond coat material behavior on low cycle fatigue (LCF) and thermo-mechanical fatigue (TMF) at various temperatures and under various loading conditions. Initially, monotonic tensile tests were carried out on a MCrAlY alloy bond coat material in the temperature range of 298 K to 1273 K (25 °C to 1000 °C). Special attention was paid to understand the ductile to brittle transition temperature (DBTT). Next, LCF and TMF tests were carried out on the thermal barrier coated Ni-based alloy IN738 specimen. After these tests, the specimens were sectioned to understand their failure mechanisms on the basis of DBTT of the bond coat material. Experimental results demonstrated that the LCF and TMF lives of the TBC specimen were closely related to the DBTT of the bond coat material, and also the TMF lives were different from those of LCF tests. It has also been observed that the crack density in the bond coat in the TBC specimen was significantly dependent on the test conditions. More importantly, not only the number of cracks but also the crack penetration probability into substrate were shown to be sensitive to the DBTT.

Life prediction and constitutive models for engine hot section anisotropic materials program

NASA Technical Reports Server (NTRS)

Nissley, D. M.; Meyer, T. G.

1992-01-01

This report presents the results from a 35 month period of a program designed to develop generic constitutive and life prediction approaches and models for nickel-based single crystal gas turbine airfoils. The program is composed of a base program and an optional program. The base program addresses the high temperature coated single crystal regime above the airfoil root platform. The optional program investigates the low temperature uncoated single crystal regime below the airfoil root platform including the notched conditions of the airfoil attachment. Both base and option programs involve experimental and analytical efforts. Results from uniaxial constitutive and fatigue life experiments of coated and uncoated PWA 1480 single crystal material form the basis for the analytical modeling effort. Four single crystal primary orientations were used in the experiments: (001), (011), (111), and (213). Specific secondary orientations were also selected for the notched experiments in the optional program. Constitutive models for an overlay coating and PWA 1480 single crystal material were developed based on isothermal hysteresis loop data and verified using thermomechanical (TMF) hysteresis loop data. A fatigue life approach and life models were selected for TMF crack initiation of coated PWA 1480. An initial life model used to correlate smooth and notched fatigue data obtained in the option program shows promise. Computer software incorporating the overlay coating and PWA 1480 constitutive models was developed.

In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC

NASA Technical Reports Server (NTRS)

Newaz, Golam M.; Majumdar, Bhaskar S.

1995-01-01

The objective of this investigation was to identify the inelastic deformation and damage mechanisms under in-phase (IP) thermomechanical fatigue (TMF) in a unidirectional SCS-6/Ti 15-3 metal matrix composite (MMC). Load-controlled IP TMF tests were conducted at 300-538 C at various stress ranges in high-purity argon. A major emphasis of this work was to identify damage mechanism well before final fracture of specimens, rather than to generate life diagrams, to aid development of a realistic deformation/damage and life model.

Some aspects of thermomechanical fatigue of AISI 304L stainless steel: Part I. creep- fatigue damage

NASA Astrophysics Data System (ADS)

Zauter, R.; Christ, H. J.; Mughrabi, H.

1994-02-01

Thermomechanical fatigue (TMF) tests on the austenitic stainless steel AISI 304L have been conducted under “true≓ plastic-strain control in vacuum. This report considers the damage oc-curring during TMF loading. It is shown how the temperature interval and the phasing (in-phase, out-of-phase) determine the mechanical response and the lifetime of the specimens. If creep-fatigue interaction takes place during in-phase cycling, the damage occurs inside the ma-terial, leading to intergranular cracks which reduce the lifetime considerably. Out-of-phase cy-cling inhibits creep-induced damage, and no lifetime reduction occurs, even if the material is exposed periodically to temperatures in the creep regime. A formula is proposed which allows prediction of the failure mode, depending on whether creep-fatigue damage occurs or not. At a given strain rate, the formula is able to estimate the temperature of transition between pure fatigue and creep-fatigue damage.

Thermal-mechanical fatigue behavior of nickel-base superalloys

NASA Technical Reports Server (NTRS)

Pelloux, R. M.; Marchand, N.

1986-01-01

The main achievements of a 36-month research program are presented. The main objective was to gain more insight into the problem of crack growth under thermal mechanical fatigue (TMF) conditions. This program was conducted at M.I.T. for the period of September 1982 to September 1985. The program was arranged into five technical tasks. Under Task I, the literature of TMF data was reviewed. The goal was to identify the crack propagation conditions in aircraft engines (hot section) and to assess the validity of conventional fracture mechanics parameters to address TMF crack growth. The second task defined the test facilities, test specimen and the testing conditions needed to establish the effectiveness of data correlation parameters identified in Task I. Three materials (Inconel X-750, Hastelloy-X, and B-1900) were chosen for the program. Task II was accomplished in collaboration with Pratt & Whitney Aircraft engineers. Under Task III, a computerized testing system to measure the TMF behavior (LCF and CG behaviors) of various alloys systems was built. The software used to run isothermal and TMF tests was also developed. Built around a conventional servohydraulic machine, the system is capable of push-pull tests under stress or strain and temperature controlled conditions in the temperature range of 25C to 1050C. A crack propagation test program was defined and conducted under Task IV. The test variables included strain range, strain rate (frequency) and temperature. Task V correlated and generalized the Task IV data for isothermal and variable temperature conditions so that several crack propagation parameters could be compared and evaluated. The structural damage (mode of cracking and dislocation substructure) under TMF cycling was identified and contrasted with the isothermal damage to achieve a sound fundamental mechanistic understanding of TMF.

Characterization of Damage Progression in SCS-6/timetal 21S (0)4 Under Thermomechanical Fatigue Loadings

NASA Technical Reports Server (NTRS)

Castelli, Michael G.

1994-01-01

A detailed experimental investigation was performed at a single maximum cyclic stress (sigma max) level to physically characterize the progression of thermomechanical fatigue (lW) damage in continuously reinforced (0 deg) SCS-6/Timetal 21S, a titanium matrix composite. In-phase (IP) and out of-phase (OP) loadings were investigated at sigma max = 1000 MPa with a temperature cycle from 150 to 6500 C. Damage progression, in terms of macroscopic property degradation, was experimentally quantified through an advanced TMF test methodology which incorporates explicit measurements of the isothermal static moduli at the TMF temperature extremes and the coefficient of thermal expansion (CTE) as functions of the TMF cycles. Detailed characterization of the physical damage progression at the microstructural level was performed by interrupting multiple TMF tests at various stages of mechanical property degradation and analyzing the microstructure through extensive destructive metallography. Further, the extent of damage was also quantified through residual static strength measurements. Results indicated that damage initiation occurred very early in cyclic life (N less than 0.1Nf) for both the IP and OP TMF loadings. IP TMF damage was found to be dominated by fiber breakage with a physical damage progression in the microstructure which was difficult to quantify. OP TMF loadings produced matrix cracking exclusively associated with surface initiations. Here, damage progression was easily distinguished in terms of both the number of cracks and their relative inward progressions toward the outer fiber rows with increased cycling. The point at which the leading cracks reached the outer fiber rows (when localized fiber/matrix de-bonding and matrix crack bridging occurred) appeared to be reflected in the macroscopic property degradation curves.

Life prediction and constitutive models for engine hot section anisotropic materials program

NASA Technical Reports Server (NTRS)

Nissley, D. M.; Meyer, T. G.; Walker, K. P.

1992-01-01

This report presents a summary of results from a 7 year program designed to develop generic constitutive and life prediction approaches and models for nickel-based single crystal gas turbine airfoils. The program was composed of a base program and an optional program. The base program addressed the high temperature coated single crystal regime above the airfoil root platform. The optional program investigated the low temperature uncoated single crystal regime below the airfoil root platform including the notched conditions of the airfoil attachment. Both base and option programs involved experimental and analytical efforts. Results from uniaxial constitutive and fatigue life experiments of coated and uncoated PWA 1480 single crystal material formed the basis for the analytical modeling effort. Four single crystal primary orientations were used in the experiments: group of zone axes (001), group of zone axes (011), group of zone axes (111), and group of zone axes (213). Specific secondary orientations were also selected for the notched experiments in the optional program. Constitutive models for an overlay coating and PWA 1480 single crystal materials were developed based on isothermal hysteresis loop data and verified using thermomechanical (TMF) hysteresis loop data. A fatigue life approach and life models were developed for TMF crack initiation of coated PWA 1480. A life model was developed for smooth and notched fatigue in the option program. Finally, computer software incorporating the overlay coating and PWA 1480 constitutive and life models was developed.

Calculation of thermomechanical fatigue life based on isothermal behavior

NASA Technical Reports Server (NTRS)

Halford, Gary R.; Saltsman, James F.

1987-01-01

The isothermal and thermomechanical fatigue (TMF) crack initiation response of a hypothetical material was analyzed. Expected thermomechanical behavior was evaluated numerically based on simple, isothermal, cyclic stress-strain - time characteristics and on strainrange versus cyclic life relations that have been assigned to the material. The attempt was made to establish basic minimum requirements for the development of a physically accurate TMF life-prediction model. A worthy method must be able to deal with the simplest of conditions: that is, those for which thermal cycling, per se, introduces no damage mechanisms other than those found in isothermal behavior. Under these assumed conditions, the TMF life should be obtained uniquely from known isothermal behavior. The ramifications of making more complex assumptions will be dealt with in future studies. Although analyses are only in their early stages, considerable insight has been gained in understanding the characteristics of several existing high-temperature life-prediction methods. The present work indicates that the most viable damage parameter is based on the inelastic strainrange.

Determination of Turbine Blade Life from Engine Field Data

NASA Technical Reports Server (NTRS)

Zaretsky, Erwin V.; Litt, Jonathan S.; Hendricks, Robert C.; Soditus, Sherry M.

2013-01-01

It is probable that no two engine companies determine the life of their engines or their components in the same way or apply the same experience and safety factors to their designs. Knowing the failure mode that is most likely to occur minimizes the amount of uncertainty and simplifies failure and life analysis. Available data regarding failure mode for aircraft engine blades, while favoring low-cycle, thermal-mechanical fatigue (TMF) as the controlling mode of failure, are not definitive. Sixteen high-pressure turbine (HPT) T-1 blade sets were removed from commercial aircraft engines that had been commercially flown by a single airline and inspected for damage. Each set contained 82 blades. The damage was cataloged into three categories related to their mode of failure: (1) TMF, (2) Oxidation/erosion (O/E), and (3) Other. From these field data, the turbine blade life was determined as well as the lives related to individual blade failure modes using Johnson-Weibull analysis. A simplified formula for calculating turbine blade life and reliability was formulated. The L10 blade life was calculated to be 2427 cycles (11 077 hr). The resulting blade life attributed to O/E equaled that attributed to TMF. The category that contributed most to blade failure was Other. If there were no blade failures attributed to O/E and TMF, the overall blade L(sub 10) life would increase approximately 11 to 17 percent.

Electromigration and Thermomechanical Fatigue Behavior of Sn0.3Ag0.7Cu Solder Joints

NASA Astrophysics Data System (ADS)

Zuo, Yong; Bieler, Thomas R.; Zhou, Quan; Ma, Limin; Guo, Fu

2017-12-01

The anisotropy of Sn crystal structures greatly affects the electromigration (EM) and thermomechanical fatigue (TMF) of solder joints. The size of solder joint shrinkage in electronic systems further makes EM and TMF an inseparably coupled issue. To obtain a better understanding of failure under combined moderately high (2000 A/cm2) current density and 10-150°C/1 h thermal cycling, analysis of separate, sequential, and concurrent EM and thermal cycling (TC) was imposed on single shear lap joints, and the microstructure and crystal orientations were incrementally characterized using electron backscatter diffraction (EBSD) mapping. First, it was determined that EM did not significantly change the crystal orientation, but the formation of Cu6Sn5 depended on the crystal orientation, and this degraded subsequent TMF behavior. Secondly, TC causes changes in crystal orientation. Concurrent EM and TC led to significant changes in crystal orientation by discontinuous recrystallization, which is facilitated by Cu6Sn5 particle formation. The newly formed Cu6Sn5 often showed its c-axis close to the direction of electron flow.

Electromigration and Thermomechanical Fatigue Behavior of Sn0.3Ag0.7Cu Solder Joints

NASA Astrophysics Data System (ADS)

Zuo, Yong; Bieler, Thomas R.; Zhou, Quan; Ma, Limin; Guo, Fu

2018-03-01

The anisotropy of Sn crystal structures greatly affects the electromigration (EM) and thermomechanical fatigue (TMF) of solder joints. The size of solder joint shrinkage in electronic systems further makes EM and TMF an inseparably coupled issue. To obtain a better understanding of failure under combined moderately high (2000 A/cm2) current density and 10-150°C/1 h thermal cycling, analysis of separate, sequential, and concurrent EM and thermal cycling (TC) was imposed on single shear lap joints, and the microstructure and crystal orientations were incrementally characterized using electron backscatter diffraction (EBSD) mapping. First, it was determined that EM did not significantly change the crystal orientation, but the formation of Cu6Sn5 depended on the crystal orientation, and this degraded subsequent TMF behavior. Secondly, TC causes changes in crystal orientation. Concurrent EM and TC led to significant changes in crystal orientation by discontinuous recrystallization, which is facilitated by Cu6Sn5 particle formation. The newly formed Cu6Sn5 often showed its c-axis close to the direction of electron flow.

Thermal-Mechanical Fatigue Testing of a Titanium-Aluminide Alloy.

DTIC Science & Technology

1987-12-01

DIMSTRIBUTION STA Approved for pubi robing e% dQ *- AFIT/GAB/AA/87D-18 THERMAL-MECHANICAL FATIGUE TESTING OF A TITANIUM - ALUMINIDE ALLOY THESIS John J...THERMAL-MECHANICAL FATIGUE TESTING OF A TITANIUM - ALUMINIDE ALLOY THESIS Presented to the Faculty of the School of Engineering of the Air Force Institute...develop a Thermal-Mechanical Fatigue (TMF) testing system for titanium - aluminide compact tension specimens. I could not have accomplished this without the

Proposed framework for thermomechanical life modeling of metal matrix composites

NASA Technical Reports Server (NTRS)

Halford, Gary R.; Lerch, Bradley A.; Saltsman, James F.

1993-01-01

The framework of a mechanics of materials model is proposed for thermomechanical fatigue (TMF) life prediction of unidirectional, continuous-fiber metal matrix composites (MMC's). Axially loaded MMC test samples are analyzed as structural components whose fatigue lives are governed by local stress-strain conditions resulting from combined interactions of the matrix, interfacial layer, and fiber constituents. The metallic matrix is identified as the vehicle for tracking fatigue crack initiation and propagation. The proposed framework has three major elements. First, TMF flow and failure characteristics of in situ matrix material are approximated from tests of unreinforced matrix material, and matrix TMF life prediction equations are numerically calibrated. The macrocrack initiation fatigue life of the matrix material is divided into microcrack initiation and microcrack propagation phases. Second, the influencing factors created by the presence of fibers and interfaces are analyzed, characterized, and documented in equation form. Some of the influences act on the microcrack initiation portion of the matrix fatigue life, others on the microcrack propagation life, while some affect both. Influencing factors include coefficient of thermal expansion mismatch strains, residual (mean) stresses, multiaxial stress states, off-axis fibers, internal stress concentrations, multiple initiation sites, nonuniform fiber spacing, fiber debonding, interfacial layers and cracking, fractured fibers, fiber deflections of crack fronts, fiber bridging of matrix cracks, and internal oxidation along internal interfaces. Equations exist for some, but not all, of the currently identified influencing factors. The third element is the inclusion of overriding influences such as maximum tensile strain limits of brittle fibers that could cause local fractures and ensuing catastrophic failure of surrounding matrix material. Some experimental data exist for assessing the plausibility of the proposed framework.

Life prediction of thermomechanical fatigue using total strain version of strainrange partitioning (SRP): A proposal

NASA Technical Reports Server (NTRS)

Saltsman, James F.; Halford, Gary R.

1988-01-01

A method is proposed (without experimental verification) for extending the total strain version of Strainrange Partitioning (TS-SRP) to predict the lives of thermomechanical fatigue (TMF) cycles. The principal feature of TS SRP is the determination of the time-temperature-waveshape dependent elastic strainrange versus life lines that are added subsequently to the classical inelastic strainrange versus life lines to form the total strainrange versus life relations. The procedure is based on a derived relation between failure and flow behavior. Failure behavior is represented by conventional SRP inelastic strainrange versus cyclic life relations, while flow behavior is captured in terms of the cyclic stress-strain response characteristics. Stress-strain response is calculated from simple equations developed from approximations to more complex cyclic constitutive models. For applications to TMF life prediction, a new testing technique, bithermal cycling, is proposed as a means for generating the inelastic strainrange versus life relations. Flow relations for use in predicting TMF lives would normally be obtained from approximations to complex thermomechanical constitutive models. Bithermal flow testing is also proposed as an alternative to thermomechanical flow testing at low strainranges where the hysteresis loop is difficult to analyze.

Creep fatigue life prediction for engine hot section materials (isotropic)

NASA Technical Reports Server (NTRS)

Nelson, R. S.; Levan, G. W.; Schoendorf, J. F.

1992-01-01

A series of high temperature strain controlled fatigue tests have been completed to study the effects of thermomechanical fatigue, multiaxial loading, reactive environments, and imposed mean stresses. The baseline alloy used in these tests was cast B1900+Hf (with and without coatings); a small number of tests of wrought INCO 718 are also included. A strong path dependence was demonstrated during the thermomechanical fatigue testing, using in-phase, out-phase, and non-proportional (elliptical and 'dogleg') strain-temperature cycles. The multiaxial tests also demonstrated cycle path to be a significant variable, using both proportional and non-proportional tension-torsion loading. Environmental screening tests were conducted in moderate pressure oxygen and purified argon; the oxygen reduced the specimen lives by two, while the argon testing produced ambiguous data. Both NiCoCrAlY overlay and diffusion aluminide coatings were evaluated under isothermal and TMF conditions; in general, the lives of the coated specimens were higher that those of uncoated specimens. Controlled mean stress TMF tests showed that small mean stress changes could change initiation lives by orders of magnitude; these results are not conservatively predicted using traditional linear damage summation rules. Microstructures were evaluated using optical, SEM and TEM methods.

Thermal-mechanical fatigue test apparatus for metal matrix composites and joint attachments

NASA Technical Reports Server (NTRS)

Westfall, L. J.; Petrasek, D. W.

1985-01-01

Two thermal-mechanical fatigue (TMF) test facilities were designed and developed, one to test tungsten fiber reinforced metal matrix composite specimens at temperature up to 1430C (2600F) and another to test composite/metal attachment bond joints at temperatures up to 760C (1400 F). The TMF facility designed for testing tungsten fiber reinforced metal matrix composites permits test specimen temperature excursions from room temperature to 1430C (2600F) with controlled heating and loading rates. A strain-measuring device measures the strain in the test section of the specimen during each heating and cooling cycle with superimposed loads. Data is collected and recorded by a computer. The second facility is designed to test composite/metal attachment bond joints and to permit heating to a maximum temperature of 760C (1400F) within 10 min and cooling to 150C (300F) within 3 min. A computer controls specimen temperature and load cycling.

Thermal-mechanical fatigue test apparatus for metal matrix composites and joint attachments

NASA Technical Reports Server (NTRS)

Westfall, Leonard J.; Petrasek, Donald W.

1988-01-01

Two thermal-mechanical fatigue (TMF) test facilities were designed and developed, one to test tungsten fiber reinforced metal matrix composite specimens at temperature up to 1430C (2600F) and another to test composite/metal attachment bond joints at temperatures up to 760F (1400F). The TMF facility designed for testing tungsten fiber reinforced metal matrix composites permits test specimen temperature excursions from room temperature to 1430C (2600F) with controlled heating and loading rates. A strain-measuring device measures the strain in the test section of the specimen during each heating and cooling cycle with superimposed loads. Data is collected and recorded by a computer. The second facility is designed to test composite/metal attachment bond joints and to permit heating to a maximum temperature of 760C (1400F) within 10 min and cooling to 150C (300F) within 3 min. A computer controls specimen temperature and load cycling.

Constitutive response of Rene 80 under thermal mechanical loads

NASA Technical Reports Server (NTRS)

Kim, K. S.; Cook, T. S.; Mcknight, R. L.

1988-01-01

The applicability of a classical constitutive model for stress-strain analysis of a nickel base superalloy, Rene' 80, in the gas turbine thermomechanical fatigue (TMF) environment is examined. A variety of tests were conducted to generate basic material data and to investigate the material response under cyclic thermomechanical loading. Isothermal stress-strain data were acquired at a variety of strain rates over the TMF temperature range. Creep curves were examined at 2 temperature ranges, 871 to 982 C and 760 to 871 C. The results provide optimism on the ability of the classical constitutive model for high temperature applications.

Multiaxial and Thermomechanical Fatigue of Materials: A Historical Perspective and Some Future Challenges

NASA Technical Reports Server (NTRS)

Kalluri, Sreeramesh

2013-01-01

Structural materials used in engineering applications routinely subjected to repetitive mechanical loads in multiple directions under non-isothermal conditions. Over past few decades, several multiaxial fatigue life estimation models (stress- and strain-based) developed for isothermal conditions. Historically, numerous fatigue life prediction models also developed for thermomechanical fatigue (TMF) life prediction, predominantly for uniaxial mechanical loading conditions. Realistic structural components encounter multiaxial loads and non-isothermal loading conditions, which increase potential for interaction of damage modes. A need exists for mechanical testing and development verification of life prediction models under such conditions.

Life prediction methodology for thermal-mechanical fatigue and elevated temperature creep design

NASA Astrophysics Data System (ADS)

Annigeri, Ravindra

Nickel-based superalloys are used for hot section components of gas turbine engines. Life prediction techniques are necessary to assess service damage in superalloy components resulting from thermal-mechanical fatigue (TMF) and elevated temperature creep. A new TMF life model based on continuum damage mechanics has been developed and applied to IN 738 LC substrate material with and without coating. The model also characterizes TMF failure in bulk NiCoCrAlY overlay and NiAl aluminide coatings. The inputs to the TMF life model are mechanical strain range, hold time, peak cycle temperatures and maximum stress measured from the stabilized or mid-life hysteresis loops. A viscoplastic model is used to predict the stress-strain hysteresis loops. A flow rule used in the viscoplastic model characterizes the inelastic strain rate as a function of the applied stress and a set of three internal stress variables known as back stress, drag stress and limit stress. Test results show that the viscoplastic model can reasonably predict time-dependent stress-strain response of the coated material and stress relaxation during hold times. In addition to the TMF life prediction methodology, a model has been developed to characterize the uniaxial and multiaxial creep behavior. An effective stress defined as the applied stress minus the back stress is used to characterize the creep recovery and primary creep behavior. The back stress has terms representing strain hardening, dynamic recovery and thermal recovery. Whenever the back stress is greater than the applied stress, the model predicts a negative creep rate observed during multiple stress and multiple temperature cyclic tests. The model also predicted the rupture time and the remaining life that are important for life assessment. The model has been applied to IN 738 LC, Mar-M247, bulk NiCoCrAlY overlay coating and 316 austenitic stainless steel. The proposed model predicts creep response with a reasonable accuracy for wide range of loading cases such as uniaxial tension, tension-torsion and tension-internal pressure loading.

Simulation of thermomechanical fatigue in solder joints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fang, H.E.; Porter, V.L.; Fye, R.M.

1997-12-31

Thermomechanical fatigue (TMF) is a very complex phenomenon in electronic component systems and has been identified as one prominent degradation mechanism for surface mount solder joints in the stockpile. In order to precisely predict the TMF-related effects on the reliability of electronic components in weapons, a multi-level simulation methodology is being developed at Sandia National Laboratories. This methodology links simulation codes of continuum mechanics (JAS3D), microstructural mechanics (GLAD), and microstructural evolution (PARGRAIN) to treat the disparate length scales that exist between the macroscopic response of the component and the microstructural changes occurring in its constituent materials. JAS3D is used tomore » predict strain/temperature distributions in the component due to environmental variable fluctuations. GLAD identifies damage initiation and accumulation in detail based on the spatial information provided by JAS3D. PARGRAIN simulates the changes of material microstructure, such as the heterogeneous coarsening in Sn-Pb solder, when the component`s service environment varies.« less

A Critical Assessment of Cyclic Softening and Hardening Behavior in a Near- α Titanium Alloy During Thermomechanical Fatigue

NASA Astrophysics Data System (ADS)

Prasad, Kartik; Sarkar, Rajdeep; Rao, K. Bhanu Sankara; Sundararaman, M.

2016-10-01

Thermomechanical fatigue behavior of Ti-alloy Timetal 834 has been studied at two temperature intervals viz. 573 K to 723 K (300 °C to 450 °C) and 723 K to 873 K (450 °C to 600 °C) under mechanical strain-controlled cycling. Among the temperatures studied, the alloy exhibited initial cyclic softening followed by cyclic hardening at 723 K (450 °C) in the temperature interval of 573 K to 723 K (300 °C to 450 °C). However, continuous cyclic hardening was observed at 723 K (450 °C) in 723 K to 873 K (450 °C to 600 °C). At 573 K (300 °C) and 873 K (600 °C), cyclic softening was observed in the cyclic stress response curves in both the temperature intervals. The dislocation substructure was observed to be planar in both the modes of TMF loading. Based on TEM microstructures and few unconventional fatigue tests, the observed cyclic hardening is attributed to dynamic strain aging. The reduced fatigue life at 723 K to 873 K (450 °C to 600 °C) under OP-TMF loading was attributed to the combined effect of cyclic hardening (leading to early strain localization and crack initiation), oxidation, and development of tensile mean stresses.

Creep-fatigue interaction at high temperature; Proceedings of the Symposium, 112th ASME Winter Annual Meeting, Atlanta, GA, Dec. 1-6, 1991

NASA Astrophysics Data System (ADS)

Haritos, George K.; Ochoa, O. O.

Various papers on creep-fatigue interaction at high temperature are presented. Individual topics addressed include: analysis of elevated temperature fatigue crack growth mechanisms in Alloy 718, physically based microcrack propagation laws for creep-fatigue-environment interaction, in situ SEM observation of short fatigue crack growth in Waspaloy at 700 C under cyclic and dwell conditions, evolution of creep-fatigue life prediction models, TMF design considerations in turbine airfoils of advanced turbine engines. Also discussed are: high temperature fatigue life prediction computer code based on the total strain version of strainrange partitioning, atomic theory of thermodynamics of internal variables, geometrically nonlinear analysis of interlaminar stresses in unsymmetrically laminated plates subjected to uniform thermal loading, experimental investigation of creep crack tip deformation using moire interferometry. (For individual items see A93-31336 to A93-31344)

The Transportable Measurements Facility (TMF) System Description.

DTIC Science & Technology

1980-05-23

sites using different antennas, antenna/site characterization, ATCRBS-mode and DABS-mode processor evaluation, and DABS-based ATC and ATARS system...conditions met. 34 TABLE 3 TMF DATA RECORDED DURING EXPERIMENTS By Word Type 1) By Parameter Word No. of Bits Experiment Number 8 Physical Location Number of

Constitutive modeling for isotropic materials (HOST)

NASA Technical Reports Server (NTRS)

Lindholm, U. S.; Chan, K. S.; Bodner, S. R.; Weber, R. M.; Walker, K. P.; Cassenti, B. N.

1985-01-01

This report presents the results of the second year of work on a problem which is part of the NASA HOST Program. Its goals are: (1) to develop and validate unified constitutive models for isotropic materials, and (2) to demonstrate their usefulness for structural analyses of hot section components of gas turbine engines. The unified models selected for development and evaluation are that of Bodner-Partom and Walker. For model evaluation purposes, a large constitutive data base is generated for a B1900 + Hf alloy by performing uniaxial tensile, creep, cyclic, stress relation, and thermomechanical fatigue (TMF) tests as well as biaxial (tension/torsion) tests under proportional and nonproportional loading over a wide range of strain rates and temperatures. Systematic approaches for evaluating material constants from a small subset of the data base are developed. Correlations of the uniaxial and biaxial tests data with the theories of Bodner-Partom and Walker are performed to establish the accuracy, range of applicability, and integability of the models. Both models are implemented in the MARC finite element computer code and used for TMF analyses. Benchmark notch round experiments are conducted and the results compared with finite-element analyses using the MARC code and the Walker model.

Quality expectations and tolerance limits of trial master files (TMF) – Developing a risk-based approach for quality assessments of TMFs

PubMed Central

Hecht, Arthur; Busch-Heidger, Barbara; Gertzen, Heiner; Pfister, Heike; Ruhfus, Birgit; Sanden, Per-Holger; Schmidt, Gabriele B.

2015-01-01

This article addresses the question of when a trial master file (TMF) can be considered sufficiently accurate and complete: What attributes does the TMF need to have so that a clinical trial can be adequately reconstructed from documented data and procedures? Clinical trial sponsors face significant challenges in assembling the TMF, especially when dealing with large, international, multicenter studies; despite all newly introduced archiving techniques it is becoming more and more difficult to ensure that the TMF is complete. This is directly reflected in the number of inspection findings reported and published by the EMA in 2014. Based on quality risk management principles in clinical trials the authors defined the quality expectations for the different document types in a TMF and furthermore defined tolerance limits for missing documents. This publication provides guidance on what type of documents and processes are most important, and in consequence, indicates on which documents and processes trial team staff should focus in order to achieve a high-quality TMF. The members of this working group belong to the CQAG Group (Clinical Quality Assurance Germany) and are QA (quality assurance) experts (auditors or compliance functions) with long-term experience in the practical handling of TMFs. PMID:26693218

Quality expectations and tolerance limits of trial master files (TMF) - Developing a risk-based approach for quality assessments of TMFs.

PubMed

Hecht, Arthur; Busch-Heidger, Barbara; Gertzen, Heiner; Pfister, Heike; Ruhfus, Birgit; Sanden, Per-Holger; Schmidt, Gabriele B

2015-01-01

This article addresses the question of when a trial master file (TMF) can be considered sufficiently accurate and complete: What attributes does the TMF need to have so that a clinical trial can be adequately reconstructed from documented data and procedures? Clinical trial sponsors face significant challenges in assembling the TMF, especially when dealing with large, international, multicenter studies; despite all newly introduced archiving techniques it is becoming more and more difficult to ensure that the TMF is complete. This is directly reflected in the number of inspection findings reported and published by the EMA in 2014. Based on quality risk management principles in clinical trials the authors defined the quality expectations for the different document types in a TMF and furthermore defined tolerance limits for missing documents. This publication provides guidance on what type of documents and processes are most important, and in consequence, indicates on which documents and processes trial team staff should focus in order to achieve a high-quality TMF. The members of this working group belong to the CQAG Group (Clinical Quality Assurance Germany) and are QA (quality assurance) experts (auditors or compliance functions) with long-term experience in the practical handling of TMFs.

Fluid flow analysis and vertical gradient freeze crystal growth in a travelling magnetic field

NASA Astrophysics Data System (ADS)

Lantzsch, R.; Grants, I.; Galindo, V.; Patzold, O.; Gerbeth, G.; Stelter, M.; Croll, A.

2006-12-01

In bulk crystal growth of semiconductors the concept of remote flow control by means of alternating magnetic fields has attracted considerable interest (see, e.g., te{1,2,3,4,5,6}). In this way the melt flow can be tailored for growth under optimised conditions to improve the crystal properties and/or the growth yield. A promising option is to apply an axially travelling magnetic wave to the melt (Travelling Magnetic Field - TMF). It introduces a mainly axial Lorentz force, which leads to meridional flow patterns. In recent numerical studies te{3}, te{6} the TMF has been recognised to be a versatile and efficient tool to control the heat and mass transport in the melt. For the Vertical Bridgman/Vertical Gradient Freeze (VB/VGF) growth, the beneficial effect of an adequately adjusted TMF-induced flow was clearly demonstrated in te{6} in terms of the reduction of thermal shear stress at the solid-liquid interface. In this paper, we present experimental and numerical results on the TMF driven convection in an isothermal model fluid as well as first VGF-TMF crystal growth experiments. The model investigations are focused on the transition from laminar to instationary flow conditions that should be avoided in crystal growth applications. The VGF experiments were aimed at growing Ga doped germanium single crystals under the influence of the travelling field in a newly developed VGF-TMF equipment. Figs 4, Refs 10.

Effects of Traveling Magnetic Field on Dynamics of Solidification

NASA Technical Reports Server (NTRS)

Mazuruk, Konstantin; Grugel, Richard; Motakef, Shariar

2001-01-01

TMF is based on imposing a controlled phase-shift in a train of electromagnets, forming a stack. Thus, the induced magnetic field can be considered to be travelling along the axis of the stack. The coupling of this traveling wave with an electrically conducting fluid results in a basic flow in a form of a single axisymmetric roll. The magnitude and direction of this flow can be remotely controlled. Furthermore, it is possible to localize the effect of this force field though activating only a number of the magnets. This force field generated in the fluid can, in principle, be used to control and modify convection in the molten material. For example, it can be used to enhance convective mixing in the melt, and thereby modify the interface shape, and macrosegregation. Alternatively, it can be used to counteract thermal and/or solutal buoyancy forces. High frequency TMF can be used in containerless processing techniques, such as float zoning, to affect the very edge of the fluid so that Marangoni flow can be counter balanced. The proposed program consists of basic fundamentals and applications. Our goal in conducting the following experiments and analyses is to establish the validity of TMF as a new tool for solidification processes. Due to its low power consumption and simplicity of design, this tool may find wide spread use in a variety of space experiments. The proposed ground based experiments are intended to establish the advantages and limitations of employing this technique. In the fundamentals component of the proposed program, we will use theoretical tools and experiments with mercury to establish the fundamental aspects of TMF-induced convection through a detailed comparison of theoretical predictions and experimental measurements of flow field. In this work, we will conduct a detailed parametric study involving the effects of magnetic field strength, frequency, wave vector, and the fluid geometry. The applications component of this work will be focused on investigating the effect of TMF on the following solidification and pre-directional solidification processes: (1) Bridgman growth of Ga:Ge with the goal of counteracting the buoyancy-driven convection; (2) Mixing of Pb-Ga and Pb-Sn alloys with the aim of initiating and maintaining a uniform melt prior to solidification processing; and (3) Float Zone growth with the aim of identifying, through simulations and model experiments, conditions needed to counteract Marangoni flow in a microgravity environment. The proposed research has strong relevance to microgravity research and the objectives of the NRA. TMF can provide a unique and accurate mechanism for generation and control of desirable flow patterns for microgravity research. These attributes have significant relevance to 1) Alloy mixing prior to solidification in a microgravity environment. TMF can provide this mixing with a low level of power consumption; (2) TMF can offset the deleterious effects of Marangoni convection in microgravity containerless processing. Thus, TMF can be instrumental in further understanding this phenomena; (3) Generation of controlled flows will allow the investigation of the effect of these flows on growth morphology and growth kinetics; and (4) On Earth, TMF has the potential to significantly counter-balance thermosolutal convection, thereby creating conditions similar to those obtained in microgravity. Once demonstrated, this new tool for use in solidification has the strong potential to find applications in a host of microgravity material research projects.

Thermal Mechanical Fatigue of Coated Blade Materials

DTIC Science & Technology

1989-06-01

temperature and strain greatly affect TMF life. The temperature-strain phase angle may vary from 180 degrees out of phase, for fast transients at...simplified constitutive technique. The life prediction model was specifically not designed to be a constitutive excercise , and therefore the observed test...the actual test. In one case (S/N 25) the actual tensile stresses were larger than the predicted values. This was caused by intermittent problems with

The failure models of Sn-based solder joints under coupling effects of electromigration and thermal cycling

NASA Astrophysics Data System (ADS)

Ma, Limin; Zuo, Yong; Liu, Sihan; Guo, Fu; Wang, Xitao

2013-01-01

Currently, the main concerns of Pb-free solder joints are focusing on electromigration (EM) and thermomechanical fatigue (TMF) problems. Many models have been established to understand the failure mechanisms of the joint under such single test conditions. Based on the fact that almost all microelectronic devices serve in combination conditions of fluctuated temperature and electric current stressing, the coupling effects of EM and TMF on evolution of microstructure and resistance of solder joint had been investigated. The failure models of binary SnBi alloy and ternary SnAgCu (SAC) solder under the coupling stressing were divided into four and three different stages, respectively. The failure mechanisms were dominant by the relationship of phase segregation, polarity effect, phase coarsening, and the coefficient of thermal expansion mismatch. Cracks tend to form and propagate along the interface between intermetallic compound layers and solder matrix in SAC solder. However, grain boundary was considered as the nucleation sites for microcracks in SnBi solder. High current density alleviates the deterioration of solder at the beginning stage of coupling stressing through Joule heating effect. An abrupt jump of resistance could be observed before the failure of the joint. The failure molds were determined by interactions of EM behaviors and TMF damages.

Stress Intensity Solutions of Thermally Induced Cracks in Combustor Liner Hot Spots Using Finite Element Analysis (FEA)

DTIC Science & Technology

2005-12-01

EPFM elastic-plastic fracture mechanics FCG fatigue crack growth FEA finite element analysis FKN ANSYS FEA command for contact pair stiffness FTOLN...current TMF research is too general for thermal gradient applications . Moreover, the nature of a cyclically heated, localized region of higher...when separating this problem into the general engineering issues that are germane to the application , one can find much published research that is

Care staff perspective on use of texture modified food in care home residents with dysphagia and dementia.

PubMed

Austbø Holteng, Lise Birgitte; Frøiland, Christina Tølbøl; Corbett, Anne; Testad, Ingelin

2017-10-01

Dysphagia and dementia are conditions, which combined, can lead to complications for the person and require good nutritional care. There is very little evidence-based literature regarding nutritional care for people with dysphagia and dementia. It is clear that care staff plays a vital role, and that communication and informed decision-making are critical to the process, yet little is known regarding the use of available interventions such as texture modified food (TMF), and their acceptability and feasibility for care staff and residents. Therefore the aim of this study was to investigate the experiences of care staff when providing nutritional care for people with dysphagia and dementia, and their impressions and experience of using TMF as a new intervention for nutrition. This was a qualitative study with an inductive approach, which aimed to explore the experience of care staff using TMF in a care home setting. Data were collected using focus group interviews, an approach which is validated as a means of supporting and developing the understanding of a phenomenon, through interactions and discussions in the group. Participants were care staff working in a care home setting in Norway. Twelve participants were recruited to this study across two focus groups. The cohort included four nurses, six practical nurses, one nurse assistants and one student nurse. Four main categories emerged from the focus group discussions regarding the use of TMF. These were: (I) emotional strain; (II) deficient nutritional care; (III) increased self-efficacy with use of TMF; (IV) better nutritional care with TMF. Use of TMF to improve nutritional care for people with dysphagia appears to have merit for both residents and care staff, and should be considered as a means of improving nutritional care for people with dementia in care homes. Minimizing feeding difficulties and increasing nutritional intake is an important goal when caring for this vulnerable group of people, and there is a need to provide better training and support for care staff to ensure they feel confident and empowered to provide high quality nutritional care. The existing Norwegian Directorate of Health checklist for nutritional care may provide a helpful basis for improvements to guidance that accounts for the needs of staff and institutions. Further research and evaluation of an intervention for tailored nutritional care is warranted to improve this critical aspect of dementia care.

Experimental investigation on the initial expansion stage of vacuum arc on cup-shaped TMF contacts

NASA Astrophysics Data System (ADS)

Wang, Ting; Xiu, Shixin; Liu, Zixi; Zhang, Yanzhe; Feng, Dingyu

2018-02-01

Arc behavior and measures to control it directly affect the properties of vacuum circuit breakers. Nowadays, transverse magnetic field (TMF) contacts are widely used for medium voltages. A magnetic field perpendicular to the current direction between the TMF contacts makes the arc move, transmitting its energy to the whole contact and avoiding excessive local ablation. Previous research on TMF arc behavior concentrated mainly on the arc movement and less on the initial stage (from arc ignition to an unstable arc column). A significant amount of experiment results suggest that there is a short period of arc stagnation after ignition. The duration of this arc stagnation and the arc characteristics during this stage affect the subsequent arc motion and even the breaking property of interrupters. The present study is of the arc characteristics in the initial stage. Experiments were carried out in a demountable vacuum chamber with cup-shaped TMF contacts. Using a high-speed camera, both single-point arc ignition mode and multiple-point arc ignition (MPAI) mode were observed. The experimental data show that the probability of MPAI mode occurring is related to the arc current. The influences of arc-ignition mode, arc current, and contact diameter on the initial expansion process were investigated. In addition, simulations were performed to analyze the multiple arc expansion process mechanically. Based on the experimental phenomena and simulation results, the mechanism of the arc expansion motion was analyzed.

Intelligent Life-Extending Controls for Aircraft Engines Studied

NASA Technical Reports Server (NTRS)

Guo, Ten-Huei

2005-01-01

Current aircraft engine controllers are designed and operated to provide desired performance and stability margins. Except for the hard limits for extreme conditions, engine controllers do not usually take engine component life into consideration during the controller design and operation. The end result is that aircraft pilots regularly operate engines under unnecessarily harsh conditions to strive for optimum performance. The NASA Glenn Research Center and its industrial and academic partners have been working together toward an intelligent control concept that will include engine life as part of the controller design criteria. This research includes the study of the relationship between control action and engine component life as well as the design of an intelligent control algorithm to provide proper tradeoffs between performance and engine life. This approach is expected to maintain operating safety while minimizing overall operating costs. In this study, the thermomechanical fatigue (TMF) of a critical component was selected to demonstrate how an intelligent engine control algorithm can significantly extend engine life with only a very small sacrifice in performance. An intelligent engine control scheme based on modifying the high-pressure spool speed (NH) was proposed to reduce TMF damage from ground idle to takeoff. The NH acceleration schedule was optimized to minimize the TMF damage for a given rise-time constraint, which represents the performance requirement. The intelligent engine control scheme was used to simulate a commercial short-haul aircraft engine.

Modeling and life prediction methodology for Titanium Matrix Composites subjected to mission profiles

NASA Technical Reports Server (NTRS)

Mirdamadi, M.; Johnson, W. S.

1994-01-01

Titanium matrix composites (TMC) are being evaluated as structural materials for elevated temperature applications in future generation hypersonic vehicles. In such applications, TMC components are subjected to complex thermomechanical loading profiles at various elevated temperatures. Therefore, thermomechanical fatigue (TMF) testing, using a simulated mission profile, is essential for evaluation and development of life prediction methodologies. The objective of the research presented in this paper was to evaluate the TMF response of the (0/90)2s SCS-6/Timetal-21S subjected to a generic hypersonic flight profile and its portions with a temperature ranging from -130 C to 816 C. It was found that the composite modulus, prior to rapid degradation, had consistent values for all the profiles tested. A micromechanics based analysis was used to predict the stress-strain response of the laminate and of the constituents in each ply during thermomechanical loading conditions by using only constituent properties as input. The fiber was modeled as elastic with transverse orthotropic and temperature dependent properties. The matrix was modeled using a thermoviscoplastic constitutive relation. In the analysis, the composite modulus degradation was assumed to result from matrix cracking and was modeled by reducing the matrix modulus. Fatigue lives of the composite subjected to the complex generic hypersonic flight profile were well correlated using the predicted stress in 0 degree fibers.

Analysis of thermomechanical fatigue of unidirectional titanium metal matrix composites

NASA Technical Reports Server (NTRS)

Mirdamadi, M.; Johnson, W. S.; Bahei-El-din, Y. A.; Castelli, M. G.

1991-01-01

Thermomechanical fatigue (TMF) data was generated for a Ti-15V-3Cr-3Al-3Sn (Ti-15-3) material reinforced with SCS-6 silicon carbide fibers for both in-phase and out-of-phase thermomechanical cycling. Significant differences in failure mechanisms and fatigue life were noted for in-phase and out-of-phase testing. The purpose of the research is to apply a micromechanical model to the analysis of the data. The analysis predicts the stresses in the fiber and the matrix during the thermal and mechanical cycling by calculating both the thermal and mechanical stresses and their rate-dependent behavior. The rate-dependent behavior of the matrix was characterized and was used to calculate the constituent stresses in the composite. The predicted 0 degree fiber stress range was used to explain the composite failure. It was found that for a given condition, temperature, loading frequency, and time at temperature, the 0 degree fiber stress range may control the fatigue life of the unidirectional composite.

Magnetic Field Applications in Semiconductor Crystal Growth and Metallurgy

NASA Technical Reports Server (NTRS)

Mazuruk, Konstantin; Ramachandran, Narayanan; Grugel, Richard; Curreri, Peter A. (Technical Monitor)

2002-01-01

The Traveling Magnetic Field (TMF) technique, recently proposed to control meridional flow in electrically conducting melts, is reviewed. In particular, the natural convection damping capability of this technique has been numerically demonstrated with the implication of significantly improving crystal quality. Advantages of the traveling magnetic field, in comparison to the more mature rotating magnetic field method, are discussed. Finally, results of experiments with mixing metallic alloys in long ampoules using TMF is presented

Influence of axial self-magnetic field component on arcing behavior of spiral-shaped contacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Dingyu; Xiu, Shixin, E-mail: xsx@mail.xjtu.edu.cn; Wang, Yi

2015-10-15

The transverse magnetic field (TMF) contact design is commonly used in vacuum interrupters. When arcing occurs between the TMF contacts, the contact structure can create a self-induced magnetic field that drives the arc to move and rotate on the contact, and thus local overheating and severe erosion can be avoided. However, TMF contacts could also create an axial self-magnetic component, and the influence of this component on the arc behavior has not been considered to date. In this paper, five different types of Cu-Cr spiral-shaped TMF contacts with three different structures are investigated in a demountable vacuum chamber that containsmore » a high-speed charge-coupled device video camera. It was found that the contact structure greatly influenced the arc behavior, especially in terms of arc rotation and the effective contact area, while contacts with the same slot structure but different diameters showed similar arc behavior and arc motion. The magnetic field distribution and the Lorentz force of each of the three different contact structures are simulated, and the axial self-magnetic field was first taken into consideration for investigation of the TMF contact design. It was found that contact designs that have higher axial self-magnetic field components tend to have arc columns with larger diameters and show poorer arc motion and rotation performance in the experiments.« less

Microstructural studies on failure mechanisms in thermo-mechanical fatigue of repaired DS R80 and IN 738 Superalloys

NASA Astrophysics Data System (ADS)

Abrokwah, Emmanuel Otchere

Directionally solidified Rene 80 (DS R80) and polycrystalline Inconel 738(IN 738) Superalloys were tested in thermo-mechanical fatigue (TMF) over the temperature range of 500-900°C and plastic strain range from 0.1 to 0.8% using a DSI Gleeble thermal simulator. Thermo-mechanical testing was carried out on the parent material (baseline) in the conventional solution treated and aged condition (STA), as well as gas tungsten arc welded (GTAW) with an IN-738 filler, followed by solution treatment and ageing. Comparison of the baseline alloy microstructure with that of the welded and heat treated alloy showed that varying crack initiation mechanisms, notably oxidation by stress assisted grain boundary oxidation, grain boundary MC carbides fatigue crack initiation, fatigue crack initiation from sample surfaces, crack initiation from weld defects and creep deformation were operating, leading to different “weakest link” and failure initiation points. The observations from this study show that the repaired samples had extra crack initiation sites not present in the baseline, which accounted for their occasional poor fatigue life. These defects include lack of fusion between the weld and the base metal, fusion zone cracking, and heat affected zone microfissures.

An overview of the Galileo Optical Experiment (GOPEX)

NASA Technical Reports Server (NTRS)

Wilson, K. E.; Lesh, J. R.

1993-01-01

Uplink optical communication to a deep-space vehicle was demonstrated. In the Galileo Optical Experiment (GOPEX), optical transmissions were beamed to the Galileo spacecraft by Earth-based transmitters at the Table Mountain Facility (TMF), California, and Starfire Optical Range (SOR), New Mexico. The demonstration took place over an eight-day period (9 Dec. through 16 Dec. 1992) as Galileo receded from Earth on its way to Jupiter, and covered ranges from 1-6 million km. At 6 million km (15 times the Earth-Moon distance), the laser beam transmitted from TMF eight days after Earth flyby covered the longest known range for transmission and detection.

Food web accumulation of cyclic siloxanes in Lake Mjøsa, Norway.

PubMed

Borgå, Katrine; Fjeld, Eirik; Kierkegaard, Amelie; McLachlan, Michael S

2012-06-05

The biomagnification of the cyclic volatile methyl siloxanes octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexatetrasiloxane (D6) was analyzed in the Lake Mjøsa food web in Norway from zooplankton and Mysis to planktivorous and piscivorous fish. The trophic magnification factor (TMF) for D5 was determined and compared with TMFs of several legacy contaminants: polychlorinated biphenyl (PCB) congeners 153 and 180, polybrominated diphenyl ether (PBDE) congeners 47 and 99, and p,p'-DDE. D5 showed TMF significantly greater than 1, implying food web biomagnification (TMF = 2.28, CI: 1.22-4.29). This contrasts with two studies that reported TMF < 1, which may reflect variability in TMF between food webs. The Lake Mjøsa D5 TMF was sensitive to the species included at the higher trophic level; whole food web TMF differed from TMF excluding smelt (Osmerus eperlanus) or brown trout (Salmo trutta) (TMF(-SMELT) = 1.62, CI: 0.96-2.72; TMF(-TROUT) = 3.58, CI: 1.82-7.03). For legacy contaminants (e.g., PCB-153 and PCB-180), the TMFs were less sensitive to the food web composition, and a better model fit was obtained compared to D5. The differences in biomagnification behavior between D5 and the legacy contaminants suggest that the biomagnification of D5 is being governed by species-specific properties such as biotransformation rate or tissue distribution that differ from those of legacy contaminants.

Materials research for high-speed civil transport and generic hypersonics: Composites durability

NASA Technical Reports Server (NTRS)

Allen-Lilly, Heather; Cregger, Eric; Hoffman, Daniel; Mccool, Jim

1995-01-01

This report covers a portion of an ongoing investigation of the durability of composites for the High Speed Civil Transport (HSCT) program. Candidate HSCT composites need to possess the high-temperature capability required for supersonic flight. This program was designed to initiate the design, analysis, fabrication, and testing of equipment intended for use in validating the long-term durability of materials for the HSCT. This equipment includes thermally actuated compression and tension fixtures, hydraulic-actuated reversible load fixtures, and thermal chambers. This equipment can be used for the durability evaluation of both composite and adhesive materials. Thermally actuated fixtures are recommended for fatigue cycling when long-term thermomechanical fatigue (TMF) data are required on coupon-sized tension or compression specimens. Long term durability testing plans for polymer matrix composite specimens are included.

SU-G-JeP2-05: Dose Effects of a 1.5T Magnetic Field On Air-Tissue and Lung-Tissue Interfaces in MRI-Guided Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Xinfeng; Prior, Phillip; Chen, Guangpei

Purpose: The purpose of the study is to investigate the dose effects of electron-return-effect (ERE) at air-tissue and lung-tissue interfaces under a 1.5T transverse-magnetic-field (TMF). Methods: IMRT and VMAT plans for representative pancreas, lung, breast and head & neck (H&N) cases were generated following clinical dose volume (DV) criteria. The air-cavity walls, as well as the lung wall, were delineated to examine the ERE. In each case, the original plan generated without TMF is compared with the reconstructed plan (generated by recalculating the original plan with the presence of TMF) and the optimized plan (generated by a full optimization withmore » TMF), using a variety of DV parameters, including V100%, D95% and dose heterogeneity index for PTV, Dmax, and D1cc for OARs (organs at risk) and tissue interface. Results: The dose recalculation under TMF showed the presence of the 1.5 T TMF can slightly reduce V100% and D95% for PTV, with the differences being less than 4% for all but lung case studied. The TMF results in considerable increases in Dmax and D1cc on the skin in all cases, mostly between 10-35%. The changes in Dmax and D1cc on air cavity walls are dependent upon site, geometry, and size, with changes ranging up to 15%. In general, the VMAT plans lead to much smaller dose effects from ERE compared to fixed-beam IMRT. When the TMF is considered in the plan optimization, the dose effects of the TMF at tissue interfaces are significantly reduced in most cases. Conclusion: The doses on tissue interfaces can be significantly changed by the presence of a 1.5T TMF during MR-guided RT when the TMF is not included in plan optimization. These changes can be substantially reduced or even removed during VMAT/IMRT optimization that specifically considers the TMF, without deteriorating overall plan quality.« less

Functional involvement of TMF/ARA160 in Rab6-dependent retrograde membrane traffic.

PubMed

Yamane, Junko; Kubo, Akiharu; Nakayama, Kazuhisa; Yuba-Kubo, Akiko; Katsuno, Tatsuya; Tsukita, Shoichiro; Tsukita, Sachiko

2007-10-01

The small GTPase Rab6 regulates retrograde membrane traffic from endosomes to the Golgi apparatus and from the Golgi to the endoplasmic reticulum (ER). We examined the role of a Rab6-binding protein, TMF/ARA160 (TATA element modulatory factor/androgen receptor-coactivator of 160 kDa), in this process. High-resolution immunofluorescence imaging revealed that TMF signal surrounded Rab6-positive Golgi structures and immunoelectron microscopy revealed that TMF is concentrated at the budding structures localized at the tips of cisternae. The knockdown of either TMF or Rab6 by RNA interference blocked retrograde transport of endocytosed Shiga toxin from early/recycling endosomes to the trans-Golgi network, causing missorting of the toxin to late endosomes/lysosomes. However, the TMF knockdown caused Rab6-dependent displacement of N-acetylgalactosaminyltransferase-2 (GalNAc-T2), but not beta1,4-galactosyltransferase (GalT), from the Golgi. Analyses using chimeric proteins, in which the cytoplasmic regions of GalNAc-T2 and GalT were exchanged, revealed that the cytoplasmic region of GalNAc-T2 plays a crucial role in its TMF-dependent Golgi retention. These observations suggest critical roles for TMF in two Rab6-dependent retrograde transport processes: one from endosomes to the Golgi and the other from the Golgi to the ER.

Technical, Managerial and Financial (TMF) Capacity Resources for Small Drinking Water Systems

EPA Pesticide Factsheets

Resources are available to help public water systems build the technical, managerial and financial (TMF) capacity. TMF capacity is necessary to achieve and maintain long-term sustainability and compliance with national safe drinking water regulations.

The Effect of the Traveling Magnetic Field (TMF) on the Buoyancy-Induced Convection in the Vertical Bridgman growth of Germanium

NASA Technical Reports Server (NTRS)

Yesilyurt, S.; Motakef, S.; Grugel, R.; Mazuruk, K.

2003-01-01

A traveling magnetic field (TMF) is created by means of applying out-of-phase currents to a number of coils. When applied to a conducting melt inside a cylindrical container, the TMF induces a Lorentz force that acts in the meridional directions (radial and axial), unlike the application of a rotating magnetic field (RMF), which creates a force in the azimuthal direction. In this work, we present a computational study of the TMF and its application to the Bridgman growth of the Ge. To quantify the effect of the TMF on the solid-melt interface, we use the maximum (magnitude-wise) tangential shear at the interface.

Prognostic indicators for dogs with dilated cardiomyopathy.

PubMed

Borgarelli, Michele; Santilli, Roberto A; Chiavegato, David; D'Agnolo, Gino; Zanatta, Renato; Mannelli, Alessandro; Tarducci, Alberto

2006-01-01

The purpose of this study was to investigate the prognostic value of various clinical, ECG, echocardiographic, and Doppler echocardiographic variables in dogs with dilated cardiomyopathy. The relationship to survival of 11 variables was evaluated in 63 dogs. Studied variables were age at time of diagnosis, class of heart failure (HF), dyspnea, ascites, atrial fibrillation (AF), ejection fraction (EF), E-point septal separation, end-diastolic volume index, end-systolic volume index (ESV-I), and restrictive or nonrestrictive transmitral flow (TMF) pattern. Median survival time was 671 days (lower 95% confidence limit, 350 days). Survival curves showed that severity of HF, ascites, ESV-I greater than 140 mL/m2, EF less than 25%, and restrictive TMF pattern had a significant negative relation to survival time. Thirty-nine dogs with both sinus rhythm and AF presented adequate TMF recordings; in these dogs, after stratification by TMF pattern, the restrictive TMF pattern was the most important negative prognostic indicator. We conclude that in dogs with dilated cardiomyopathy the restrictive TMF pattern appears to represent a useful prognostic indicator. Class of HF, ascites, ESV-I, and EF are also useful indexes if an adequate TMF pattern is not recorded.

Results from the Galileo Laser Uplink: A JPL Demonstration of Deep-Space Optical Communications

NASA Technical Reports Server (NTRS)

Wilson, K. E.; Lesh, J. R.

1993-01-01

The successful completion of the Galileo Optical Experiment (GOPEX), represented the accomplishment of a significant milestone in JPL's optical communication plan. The experiment demonstrated the first transmission of a narrow laser beam to a deep-space vehicle. Laser pulses were beamed to the Galileo spacecraft by Earth-based transmitters at the Table Mountain Facility (TMF), California, and Starfire Optical Range (SOR), New Mexico. The experiment took place over an eight-day period (December 9 through December 16, 1992) as Galileo receded from Earth on its way to Jupiter, and covered ranges from 1 to 6 million kilometers (15 times the Earth-Moon distance), the laser uplink from TMF covered the longest known range for laser beam transmission and detection. This demonstration is the latest in a series of accomplishments by JPL in the development of deep-space optical communications technology.

Sensor Based Engine Life Calculation: A Probabilistic Perspective

NASA Technical Reports Server (NTRS)

Guo, Ten-Huei; Chen, Philip

2003-01-01

It is generally known that an engine component will accumulate damage (life usage) during its lifetime of use in a harsh operating environment. The commonly used cycle count for engine component usage monitoring has an inherent range of uncertainty which can be overly costly or potentially less safe from an operational standpoint. With the advance of computer technology, engine operation modeling, and the understanding of damage accumulation physics, it is possible (and desirable) to use the available sensor information to make a more accurate assessment of engine component usage. This paper describes a probabilistic approach to quantify the effects of engine operating parameter uncertainties on the thermomechanical fatigue (TMF) life of a selected engine part. A closed-loop engine simulation with a TMF life model is used to calculate the life consumption of different mission cycles. A Monte Carlo simulation approach is used to generate the statistical life usage profile for different operating assumptions. The probabilities of failure of different operating conditions are compared to illustrate the importance of the engine component life calculation using sensor information. The results of this study clearly show that a sensor-based life cycle calculation can greatly reduce the risk of component failure as well as extend on-wing component life by avoiding unnecessary maintenance actions.

TMF design considerations in turbine airfoils of advanced turbine engines

NASA Astrophysics Data System (ADS)

Date, C. G.; Zamrik, S. Y.; Adams, J. H.; Frani, N. E.

A review of thermal-mechanicalfatigue (TMF) in advanced turbine engines is presented. The review includes examples of typical thermal-mechnical loadings encountered in the design of hot section blades and vanes. Specific issues related to TMF behavior are presented and the associated impact on component life analysis and design is discussed.

Tangeretin derivative, 5-acetyloxy-6,7,8,4'-tetramethoxyflavone induces G2/M arrest, apoptosis and autophagy in human non-small cell lung cancer cells in vitro and in vivo.

PubMed

Li, Yi Rong; Li, Shiming; Ho, Chi-Tang; Chang, Ya-Han; Tan, Kok-Tong; Chung, Ting-Wen; Wang, Bing-Yen; Chen, Yu-Kuo; Lin, Chi-Chen

2016-01-01

Tangeretin, a major phytochemicals in tangerine peels--an important Chinese herb, has been found to have anti-carcinogenic properties. To improve bioavailability and increase potency of tangeretin, its derivative, 5-acetyloxy-6,7,8,4'-tetramethoxyflavone (5-AcTMF), has been synthesized and shown potent inhibition of proliferation activity against human breast and leukemia cancer cell lines. In this study, we have further investigated the anticancer effects of 5-AcTMF on CL1-5 non-small cell lung cancer cells (NSCLC) both in vitro and in vivo and demonstrated that 5-AcTMF effectively inhibited cancer cell proliferation, induced G2/M-phase arrest associated with cdc2 and CDC25c and increased in the apoptotic cells associated with caspase activation, down regulation of Bcl-2, XIAP and Survivn, inducing release of cytochrome c into the cytosol and disruption of mitochondrial membrane potential. We also found that 5-AcTMF treatment of CL1-5 activated autophagy, indicated by triggered autophagosome formation and increased LC3-II levels and formation of LC3 puncta. Moreover, we also found that 5-AcTMF lowered phophoatidylinositol 3-kinase/AKT/mTOR signaling pathway. Over-expression of AKT by AKT cDNA transfection decreased 5-AcTMF mediated apoptosis and autophagy, supporting the induction of apoptosis and autophagy by inhibition of AKT pathway. In an animal study, 5-AcTMF effectively delayed tumor growth in a nude mouse model of CL1-5 xenografts without observed adverse effect. Immunohistochemistry Analysis indicated that 5-AcTMF induced CL1-5 cell apoptosis and autophagy in vivo. Taken together, these data demonstrate that 5-AcTMF is a novel small molecule agent that can inhibit NSCLC cell proliferation, and induce G(2)/M phase arrest and via the mitochondrial apoptotic pathway and autophagy.

Investigation of damage mechanisms in a cross-ply metal-matrix composite under thermomechanical loading. Master's thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schubbe, J.J.

1990-12-01

Metal matrix composites (MMCs) are rapidly becoming strong candidates for high temperature and high stiffness structural applications such as the Advanced Tactical Fighter (ATF). This study systematically investigated the failure modes and associated damage in a cross-ply, (0/90)2s SCS6/Ti-15-3 metal matrix composite under in-phase and out-of-phase thermomechanic fatigue. Initiation and progression of fatigue damage were recorded and correlated to changes in Young's Modulus of the composite material. Experimental results show an internal stabilization of reaction zone size but degradation and separation from constituent materials under extended cyclic thermal loading. Critical to damage were transverse cracks initiating in the 90 degreesmore » plies, growing and coalescing from fiber/matrix interfaces internal to the specimen, progressing outward through the 0 degree plies before failure. Maximum mechanical strain at failure was determined to be approximately 0.0075 mm/mm. A correlation was made relating maximum matrix stress to failure life, resulting in a fatigue threshold limit of 280 MPa. An attempt was made to correlate the degradation in Young's Modulus (Damage=1-E/Eo) with the applied life cycles from different TMF tests.« less

Creep fatigue life prediction for engine hot section materials (isotropic)

NASA Technical Reports Server (NTRS)

Nelson, R. S.; Levan, G. W.; Harvey, P. R.

1992-01-01

This Final Report covers the activities completed under the optional program of the NASA HOST Contract, NAS3-23288. The initial effort of the optional program was report-in NASA CR189221, which consisted of high temperature strain controlled fatigue tests to study the effects of thermomechanical fatigue, multiaxial loading, reactive environments, and imposed stresses. The baseline alloy used in the tests included B1900+Hf (with or without coating) and wrought INCO 718. Tests conducted on B1900+Hf included environmental tests using various atmospheres (75 psig oxygen, purified argon, or block exposures) and specimen tests of wrought INCO 718 included tensile, creep, stress rupture, TMF, multiaxial, and mean stress tests. Results of these testings were used to calibrate a CDA model for INCO 718 alloy and to develop modifications or corrections to the CDA model to handle additional failure mechanisms. The Socie parameter was found to provide the best correlation for INCO multiaxial loading. Microstructural evaluations consisting of optical, Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) techniques, and surface replication techniques to determine crack initiation lives provided data which were used to develop life prediction models.

Mitigating reentry radio blackout by using a traveling magnetic field

NASA Astrophysics Data System (ADS)

Zhou, Hui; Li, Xiaoping; Xie, Kai; Liu, Yanming; Yu, Yuanyuan

2017-10-01

A hypersonic flight or a reentry vehicle is surrounded by a plasma layer that prevents electromagnetic wave transmission, which results in radio blackout. The magnetic-window method is considered a promising means to mitigate reentry communication blackout. However, the real application of this method is limited because of the need for strong magnetic fields. To reduce the required magnetic field strength, a novel method that applies a traveling magnetic field (TMF) is proposed in this study. A mathematical model based on magneto-hydrodynamic theory is adopted to analyze the effect of TMF on plasma. The mitigating effects of the TMF on the blackout of typical frequency bands, including L-, S-, and C-bands, are demonstrated. Results indicate that a significant reduction of plasma density occurs in the magnetic-window region by applying a TMF, and the reduction ratio is positively correlated with the velocity of the TMF. The required traveling velocities for eliminating the blackout of the Global Positioning System (GPS) and the typical telemetry system are also discussed. Compared with the constant magnetic-window method, the TMF method needs lower magnetic field strength and is easier to realize in the engineering field.

Technical Note: Dose effects of 1.5 T transverse magnetic field on tissue interfaces in MRI-guided radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Xinfeng; Prior, Phil; Chen, Guang-Pei

Purpose: The integration of MRI with a linear accelerator (MR-linac) offers great potential for high-precision delivery of radiation therapy (RT). However, the electron deflection resulting from the presence of a transverse magnetic field (TMF) can affect the dose distribution, particularly the electron return effect (ERE) at tissue interfaces. The purpose of the study is to investigate the dose effects of ERE at air-tissue and lung-tissue interfaces during intensity-modulated radiation therapy (IMRT) planning. Methods: IMRT and volumetric modulated arc therapy (VMAT) plans for representative pancreas, lung, breast, and head and neck (HN) cases were generated following commonly used clinical dose volumemore » (DV) criteria. In each case, three types of plans were generated: (1) the original plan generated without a TMF; (2) the reconstructed plan generated by recalculating the original plan with the presence of a TMF of 1.5 T (no optimization); and (3) the optimized plan generated by a full optimization with TMF = 1.5 T. These plans were compared using a variety of DV parameters, including V{sub 100%}, D{sub 95%}, DHI [dose heterogeneity index: (D{sub 20%}–D{sub 80%})/D{sub prescription}], D{sub max}, and D{sub 1cc} in OARs (organs at risk) and tissue interface. All the optimizations and calculations in this work were performed on static data. Results: The dose recalculation under TMF showed the presence of the 1.5 T TMF can slightly reduce V{sub 100%} and D{sub 95%} for PTV, with the differences being less than 4% for all but one lung case studied. The TMF results in considerable increases in D{sub max} and D{sub 1cc} on the skin in all cases, mostly between 10% and 35%. The changes in D{sub max} and D{sub 1cc} on air cavity walls are dependent upon site, geometry, and size, with changes ranging up to 15%. The VMAT plans lead to much smaller dose effects from ERE compared to fixed-beam IMRT in pancreas case. When the TMF is considered in the plan optimization, the dose effects of the TMF at tissue interfaces (e.g., air-cavity wall, lung-tissue interfaces, skin) are significantly reduced in most cases. Conclusions: The doses on tissue interfaces can be significantly changed by the presence of a TMF during MR-guided RT when the magnetic field is not included in plan optimization. These changes can be substantially reduced or even eliminated during VMAT/IMRT optimization that specifically considers the TMF, without deteriorating overall plan quality.« less

Understanding the Reliability of Solder Joints Used in Advanced Structural and Electronics Applications: Part 2 - Reliability Performance.

DOE PAGES

Vianco, Paul T.

2017-03-01

Whether structural or electronic, all solder joints must provide the necessary level of reliability for the application. The Part 1 report examined the effects of filler metal properties and the soldering process on joint reliability. Filler metal solderability and mechanical properties, as well as the extents of base material dissolution and interface reaction that occur during the soldering process, were shown to affect reliability performance. The continuation of this discussion is presented in this Part 2 report, which highlights those factors that directly affect solder joint reliability. There is the growth of an intermetallic compound (IMC) reaction layer at themore » solder/base material interface by means of solid-state diffusion processes. In terms of mechanical response by the solder joint, fatigue remains as the foremost concern for long-term performance. Thermal mechanical fatigue (TMF), a form of low-cycle fatigue (LCF), occurs when temperature cycling is combined with mismatched values of the coefficient of thermal expansion (CTE) between materials comprising the solder joint “system.” Vibration environments give rise to high-cycle fatigue (HCF) degradation. Although accelerated aging studies provide valuable empirical data, too many variants of filler metals, base materials, joint geometries, and service environments are forcing design engineers to embrace computational modeling to predict the long-term reliability of solder joints.« less

A technique to control cross-field diffusion of plasma across a transverse magnetic field

NASA Astrophysics Data System (ADS)

Hazarika, P.; Chakraborty, M.; Das, B. K.; Bandyopadhyay, M.

2016-12-01

A study to control charged particle transport across a transverse magnetic field (TMF), popularly known as the magnetic filter in a negative ion source, has been carried out in a double plasma device. In the experimental setup, the TMF placed between the two magnetic cages divides the whole plasma chamber into two distinct regions, viz., the source and the target on the basis of the plasma production and the corresponding electron temperature. The plasma produced in the source region by the filament discharge method diffuses into the target region through the TMF. Data are acquired by the Langmuir probe and are compared in different source configurations, in terms of external biasing applied to metallic plates inserted in the TMF plane but in the orthogonal direction. The effect of the direction of current between the two plates in either polarity of bias in the presence of TMF on the plasma parameters and the cross-field transport of charge particles are discussed.

From hopping to ballistic transport in graphene-based electronic devices

NASA Astrophysics Data System (ADS)

Taychatanapat, Thiti

This thesis describes electronic transport experiments in graphene from the hopping to the ballistic regime. The first experiment studies dual-gated bilayer graphene devices. By applying an electric field with these dual gates, we can open a band gap in bilayer graphene and observe an increase in resistance of over six orders of magnitude as well as a strongly non-linear behavior in the transport characteristics. A temperature-dependence study of resistance at large electric field at the charge neutrality point shows the change in the transport mechanism from a hopping dominated regime at low temperature to a diffusive regime at high temperature. The second experiment examines electronic properties of Bernal-stacked trilayer graphene. Due to the low mobility of trilayer graphene on SiO 2substrates, we employ hexagonal boron nitride as a local substrate to improve its mobility. This led us to observe a quantum Hall effect with multiple Landau level crossings, proving the coexistence of massless and massive Dirac fermions in Bernal-stacked trilayer graphene. From the position of these crossing points in magnetic field and electron density, we can deduce the band parameters used to model its band structure. At high magnetic field, we observe broken symmetry states via Landau level splittings as well as crossings among these broken-symmetry states. In the third experiment, we investigate transverse magnetic focusing (TMF) in mono-, bi-, and tri-layer graphene. The ability to tune density allows us to electronically modify focal points and investigate TMF continuously from hole to electron regimes. This also allows us to observe the change in band structure of trilayer graphene as a function of applied electric field. Finally, we also observe TMF at room temperature in monolayer graphene which unambiguously proves the existence of ballistic transport at room temperature.

SU-F-BRB-14: Dosimetric Effects at Air- Tissue Boundary Due to Magnetic Field in MR-Guided IMRT/VMAT Delivery for Head and Neck Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prior, P; Chen, X; Schultz, C

Purpose: The advent of the MR-Linac enables real-time and high soft tissue contrast image guidance in radiation therapy (RT) delivery. Potential hot-spots at air-tissue interfaces, such as the sphenoid sinus, in RT for head and neck cancer (HNC), could potentially occur due to the electron return effect (ERE). In this study, we investigate the dosimetric effects of ERE on the dose distribution at air-tissues interfaces in HNC IMRT treatment planning. Methods: IMRT plans were generated based on planning CT’s acquired for HNC cases (nasopharynx, base of skull and paranasal sinus) using a research planning system (Monaco, v5.09.06, Elekta) employing Montemore » Carlo dose calculations with or without the presence of a transverse magnetic field (TMF). The dose in the air cavity was calculated in a 1 & 2 mm thick tissue layer, while the dose to the skin was calculated in a 1, 3 and 5 mm thick tissue layer. The maximum dose received in 1 cc volume, D1cc, were collected at different TMF strengths. Plan qualities generated with or without TMF or with increasing TMF were compared in terms of commonly-used dose-volume parameters (DVPs). Results: Variations in DVPs between plans with and without a TMF present were found to be within 5% of the planning CT. The presence of a TMF results in <5% changes in sinus air tissue interface. The largest skin dose differences with and without TMF were found within 1 mm of the skin surface Conclusion: The presence of a TMF results in practically insignificant changes in HNC IMRT plan quality, except for skin dose. Planning optimization with skin DV constraints could reduce the skin doses. This research was partially supported by Elekta Inc. (Crowley, U.K.)« less

Atmospheric Turbulence Statistics from GOLD Experiments

NASA Technical Reports Server (NTRS)

Jeganathan, Muthu; Wilson, Keith; Lesh, Jim

1996-01-01

Ground-Orbiter Lasercomm Demonstration (GOLD) includes the following: (1) Optical communication experiments between Table Mountain Observatory (TMF) and Japanese Engineering Test Satellite (ETS-VI); (2) International cooperative effort between NASA, NASDA, CRL and JPL; and (3) Phase 1 transmissions from October 1995 to January 1996 and Phase 2 transmissions from March 1996 to May 1996.

Simultaneous lidar observations of the water vapor and ozone signatures of a stratospheric intrusion during the MOHAVE-2009 campaign

NASA Astrophysics Data System (ADS)

Leblanc, T.; McDermid, I. S.; Pérot, K.

2010-12-01

Ozone and water vapor signatures of a stratospheric intrusion were simultaneously observed by the Jet Propulsion Laboratory lidars located at Table Mountain Facility, California (TMF, 34.4N, 117.7W) during the Measurements of Humidity in the Atmosphere and Validation Experiments (MOHAVE-2009) campaign in October 2009. These observations are placed in the context of the meridional displacement and folding of the tropopause, and resulting contrast in the properties of the air masses sampled by lidar. The lidar observations are supported by model data, specifically potential vorticity fields advected by the high-resolution transport model MIMOSA, and by 10-day backward isentropic trajectories. The ozone and water vapor anomalies measured by lidar were largely anti-correlated, and consistent with the assumption of a wet and ozone-poor subtropical upper troposphere, and a dry and ozone-rich extra-tropical lowermost stratosphere. However, it is shown that this anti-correlation relation collapsed just after the stratospheric intrusion event of October 20, suggesting mixed air embedded along the subtropical jet stream and sampled by lidar during its displacement south of TMF (tropopause fold). The ozone-PV expected positive correlation relation held strongly throughout the measurement period, including when a lower polar stratospheric filament passed over TMF just after the stratospheric intrusion. The numerous highly-correlated signatures observed during this event demonstrate the strong capability of the water vapor and ozone lidars at TMF, and provide new confidence in the future detection by lidar of long-term variability of water vapor and ozone in the Upper Troposphere-Lower Stratosphere (UTLS).

Elevated temperature crack growth

NASA Technical Reports Server (NTRS)

Kim, K. S.; Vanstone, R. H.

1992-01-01

The purpose of this program was to extend the work performed in the base program (CR 182247) into the regime of time-dependent crack growth under isothermal and thermal mechanical fatigue (TMF) loading, where creep deformation also influences the crack growth behavior. The investigation was performed in a two-year, six-task, combined experimental and analytical program. The path-independent integrals for application to time-dependent crack growth were critically reviewed. The crack growth was simulated using a finite element method. The path-independent integrals were computed from the results of finite-element analyses. The ability of these integrals to correlate experimental crack growth data were evaluated under various loading and temperature conditions. The results indicate that some of these integrals are viable parameters for crack growth prediction at elevated temperatures.

Convection Induced by Traveling Magnetic Fields in Semiconductor Melts

NASA Technical Reports Server (NTRS)

Konstantin, Mazuruk

2000-01-01

Axisymmetric traveling magnetic fields (TMF) can be beneficial for crystal growth applications. such as the vertical Bridgman, float zone or traveling heater methods. TMF induces a basic flow in the form of a single roll. This type of flow can enhance mass and heat transfer to the growing crystal. More importantly, the TMF Lorentz body force induced in the system can counterbalance the buoyancy forces, so the resulting convection can be much smaller and even the direction of it can be changed. In this presentation, we display basic features of this novel technique. In particular, numerical calculations of the Lorentz force for arbitrary frequencies will be presented along with induced steady-state fluid flow profiles. Also, numerical modeling of the TMF counter-balancing natural convection in vertical Bridgman systems will be demonstrated.

Life prediction and constitutive models for engine hot section anisotropic materials program

NASA Technical Reports Server (NTRS)

Swanson, G. A.; Linask, I.; Nissley, D. M.; Norris, P. P.; Meyer, T. G.; Walker, K. P.

1986-01-01

This report presents the results of the first year of a program designed to develop life prediction and constitutive models for two coated single crystal alloys used in gas turbine airfoils. The two alloys are PWA 1480 and Alloy 185. The two oxidation resistant coatings are PWA 273, an aluminide coating, and PWA 286, an overlay NiCoCrAlY coating. To obtain constitutive and/or fatigue data, tests were conducted on coated and uncoated PWA 1480 specimens tensilely loaded in the 100 , 110 , 111 , and 123 directions. A literature survey of constitutive models was completed for both single crystal alloys and metallic coating materials; candidate models were selected. One constitutive model under consideration for single crystal alloys applies Walker's micromechanical viscoplastic formulation to all slip systems participating in the single crystal deformation. The constitutive models for the overlay coating correlate the viscoplastic data well. For the aluminide coating, a unique test method is under development. LCF and TMF tests are underway. The two coatings caused a significant drop in fatigue life, and each produced a much different failure mechanism.

A comparison of life prediction methodologies for titanium matrix composites subjected to thermomechanical fatigue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calcaterra, J.R.; Johnson, W.S.; Neu, R.W.

1997-12-31

Several methodologies have been developed to predict the lives of titanium matrix composites (TMCs) subjected to thermomechanical fatigue (TMF). This paper reviews and compares five life prediction models developed at NASA-LaRC. Wright Laboratories, based on a dingle parameter, the fiber stress in the load-carrying, or 0{degree}, direction. The two other models, both developed at Wright Labs. are multi-parameter models. These can account for long-term damage, which is beyond the scope of the single-parameter models, but this benefit is offset by the additional complexity of the methodologies. Each of the methodologies was used to model data generated at NASA-LeRC. Wright Labs.more » and Georgia Tech for the SCS-6/Timetal 21-S material system. VISCOPLY, a micromechanical stress analysis code, was used to determine the constituent stress state for each test and was used for each model to maintain consistency. The predictive capabilities of the models are compared, and the ability of each model to accurately predict the responses of tests dominated by differing damage mechanisms is addressed.« less

Traveling Magnetic Field Applications for Materials Processing in Space

NASA Technical Reports Server (NTRS)

Grugel, R. N.; Mazuruk, K.; Curreri, Peter A. (Technical Monitor)

2001-01-01

Including the capability to induce a controlled fluid flow in the melt can significantly enrich research on solidification phenomena in a microgravity environment. The traveling magnetic field (TMF) is a promising technique to achieve this goal and is the aim of our ground-based project. In this presentation we will discuss new theoretical as well as experimental results recently obtained by our group. In particular, we experimentally demonstrated efficient mixing of metal alloys in long tubes subjected to TMF during processing. Application of this technique can provide an elegant solution to ensure melt homogenization prior to solidification in a microgravity environment where natural convection is generally absent. Results of our experimental work of applying the TMF technique to alloy melts will be presented. Possible applications of TMF on board the International Space Station will also be discussed.

Traditional Masculinity and Femininity: Validation of a New Scale Assessing Gender Roles.

PubMed

Kachel, Sven; Steffens, Melanie C; Niedlich, Claudia

2016-01-01

Gender stereotype theory suggests that men are generally perceived as more masculine than women, whereas women are generally perceived as more feminine than men. Several scales have been developed to measure fundamental aspects of gender stereotypes (e.g., agency and communion, competence and warmth, or instrumentality and expressivity). Although omitted in later version, Bem's original Sex Role Inventory included the items "masculine" and "feminine" in addition to more specific gender-stereotypical attributes. We argue that it is useful to be able to measure these two core concepts in a reliable, valid, and parsimonious way. We introduce a new and brief scale, the Traditional Masculinity-Femininity (TMF) scale, designed to assess central facets of self-ascribed masculinity-femininity. Studies 1-2 used known-groups approaches (participants differing in gender and sexual orientation) to validate the scale and provide evidence of its convergent validity. As expected the TMF reliably measured a one-dimensional masculinity-femininity construct. Moreover, the TMF correlated moderately with other gender-related measures. Demonstrating incremental validity, the TMF predicted gender and sexual orientation in a superior way than established adjective-based measures. Furthermore, the TMF was connected to criterion characteristics, such as judgments as straight by laypersons for the whole sample, voice pitch characteristics for the female subsample, and contact to gay men for the male subsample, and outperformed other gender-related scales. Taken together, as long as gender differences continue to exist, we suggest that the TMF provides a valuable methodological addition for research into gender stereotypes.

CLONING AND EXPRESSING TRYPSIN MODULATING OOSTATIC FACTOR IN Chlorella desiccata TO CONTROL MOSQUITO LARVAE.

PubMed

Borovsky, Dov; Sterner, Andeas; Powell, Charles A

2016-01-01

The insect peptide hormone trypsin modulating oostatic factor (TMOF), a decapeptide that is synthesized by the mosquito ovary and controls the translation of the gut's trypsin mRNA was cloned and expressed in the marine alga Chlorella desiccata. To express Aedes aegypti TMOF gene (tmfA) in C. desiccata cells, two plasmids (pYES2/TMOF and pYDB4-tmfA) were engineered with pKYLX71 DNA (5 Kb) carrying the cauliflower mosaic virus (CaMV) promoter 35S(2) and the kanamycin resistant gene (neo), as well as, a 8 Kb nitrate reductase gene (nit) from Chlorella vulgaris. Transforming C. desiccata with pYES2/TMOF and pYDB4-tmfA show that the engineered algal cells express TMOF (20 ± 4 μg ± SEM and 17 ± 3 μg ± SEM, respectively in 3 × 10(8) cells) and feeding the cells to mosquito larvae kill 75 and 60% of Ae. aegypti larvae in 4 days, respectively. Southern and Northern blots analyses show that tmfA integrated into the genome of C. desiccata by homologous recombination using the yeast 2 μ circle of replication and the nit in pYES2/TMOF and pYDB4-tmfA, respectively, and the transformed algal cells express tmfA transcript. Using these algal cells it will be possible in the future to control mosquito larvae in the marsh. © 2015 Wiley Periodicals, Inc.

Vacuum arcing behavior between transverse magnetic field contacts subjected to variable axial magnetic field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ma, Hui; Wang, Jianhua; Liu, Zhiyuan, E-mail: liuzy@mail.xjtu.edu.cn

2016-06-15

The objective of this work is to reveal the effects of an axial magnetic field (AMF) on the vacuum arc characteristics between transverse magnetic field (TMF) contacts. These vacuum arc characteristics include the vacuum arcing behavior and the arc voltage waveform. In the experiments, an external AMF was applied to a pair of TMF contacts. The external AMF flux density B{sub AMF} can be adjusted from 0 to 110 mT. The arc current in the tests varied over a range from 0 to 20 kA rms at 45 Hz. The contact material was CuCr25 (25% Cr). A high-speed charge-coupled device video camera wasmore » used to record the vacuum arc evolution. The experimental results show that the application of the AMF effectively reduces the TMF arc voltage noise component and reduces the formation of liquid metal drops between the contacts. The diffuse arc duration increases linearly with increasing AMF flux density, but it also decreases linearly with increasing arc current under application of the external AMF. The results also indicate that the diffuse arc duration before the current zero is usually more than 1 ms under the condition that the value of the AMF per kiloampere is more than 2.0 mT/kA. Finally, under application of the AMF, the arc column of the TMF contacts may constrict and remain in the center region without transverse rotation. Therefore, the combined TMF–AMF contacts should be designed such that they guarantee that the AMF is not so strong as to oppose transverse rotation of the arc column.« less

Vacuum arc behavior and its voltage characteristics in drawing process controlled by composite magnetic fields along axial and transverse directions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Lijun, E-mail: lijunwang@mail.xjtu.edu.cn; Deng, Jie; Wang, Haijing

In this research, drawing vacuum arc (VA) experiments were conducted using composite contacts under currents ranging from 5 kA to 20 kA root mean square (rms). The new type of contact comprised an axial magnetic field (AMF) configuration and a transverse magnetic field (TMF) configuration. The TMF plate was in the center, surrounded by the AMF plate. The contact generated both AMFs and TMFs simultaneously. VA appearances and arc voltages were recorded, and the VA was modeled as a conductor for electromagnetic force analysis in ANSYS software. The results showed that the coaxiality of operating mechanisms significantly influenced arc behavior just asmore » the arc was ignited. When arc brightness did not increase after ignition, there was a voltage drop accompanied with diffusion of the VA. As to VA development, when an arc was ignited on an AMF plate, it spread on the plate and rotated. Over time the arc current increased, the constricting arc forms, and the arc column rotated on the TMF plate under the action of Ampere's force. With regard to the influence of a magnetic field on a VA at different stages, in the initial drawing arc stage the TMF was dominant, and the arc started to rotate under the action of Ampere's force. Afterwards, the AMF was dominant, with a steadily burning arc. As for contact melting, in the initial arcing period, a contracted short arc caused severe melting and erosion of the contact plate. When the ignition spot or root was close to the slot of plate, the electromagnetic force pushed the arc toward slot and contact edge, resulting in local erosion of the slot region.« less

Comparison of diagnostic classification systems for delirium with new research criteria that incorporate the three core domains.

PubMed

Trzepacz, Paula T; Meagher, David J; Franco, José G

2016-05-01

Diagnostic classification systems do not incorporate phenomenological research findings about the three core symptom domains of delirium (Attentional/Cognitive, Circadian, Higher Level Thinking). We evaluated classification performances of novel Trzepacz, Meagher, and Franco research diagnostic criteria (TMF) that incorporate those domains and ICD-10, DSM-III-R, DSM-IV, and DSM-5. Primary data analysis of 641 patients with mixed neuropsychiatric profiles. Delirium (n=429) and nondelirium (n=212) reference standard groups were identified using cluster analysis of symptoms assessed using the Delirium Rating Scale-Revised-98. Accuracy, sensitivity, specificity, positive and negative predictive values (PPV, NPV), and likelihood ratios (LR+, LR-) are reported. TMF criteria had high sensitivity and specificity (87.4% and 89.2%), more balanced than DSM-III-R (100% and 31.6%), DSM-IV (97.7% and 74.1%), DSM-5 (97.7% and 72.6%), and ICD-10 (66.2% and 100%). PPV of DSM-III-R, DSM-IV, and DSM-5 were <90.0%, while PPV for ICD-10 and TMF were >90%. ICD-10 had the lowest NPV (59.4%). TMF had the highest LR+ (8.06) and DSM-III-R the lowest LR- (0.0). Overall, values for DSM-IV and DSM-5 were similar, whereas for ICD-10 and DSM-III-R were inverse of each other. In the pre-existing cognitive impairment/dementia subsample (n=128), TMF retained its highest LR+ though specificity (58.3%) became less well balanced with sensitivity (87.9%), which still exceeded that of DSM. TMF research diagnostic criteria performed well, with more balanced sensitivity and specificity and the highest likelihood ratio for delirium identification. Reflecting the three core domains of delirium, TMF criteria may have advantages in biological research where delineation of this syndrome is important. Copyright © 2016. Published by Elsevier Inc.

45 Km Horizontal Path Optical Link Experiment

NASA Technical Reports Server (NTRS)

Biswas, A.; Ceniceros, J.; Novak, M.; Jeganathan, M.; Portillo, A.; Erickson, D.; Depew, J.; Sanii, B.; Lesh, J. R.

2000-01-01

Mountain-top to mountain-top optical link experiments have been initiated at JPL, in order to perform a systems level evaluation of optical communications. Progress made so far is reported. ne NASA, JPL developed optical communications demonstrator (OCD) is used to transmit a laser signal from Strawberry Peak (SP), located in the San Bernadino mountains of California. This laser beam is received by a 0.6 m aperture telescope at JPL's Table Mountain Facility (TMF), located in Wrightwood, California. The optical link is bi-directional with the TMF telescope transmitting a continuous 4-wave (cw) 780 run beacon and the OCD sending back a 840 nm, 100 - 500 Mbps pseudo noise (PN) modulated, laser beam. The optical link path is at an average altitude of 2 km above sea level, covers a range of 46.8 km and provides an atmospheric channel equivalent to approx. 4 air masses. Average received power measured at either end fall well within the uncertainties predicted by link analysis. The reduction in normalized intensity variance (sigma(sup 2, sub I)) for the 4-beam beacon, compared to each individual beam, at SP, was from approx. 0.68 to 0.22. With some allowance for intra-beam mis-alignment, this is consistent with incoherent averaging. The sigma(sup2, sub I) measured at TMF approx. 0.43 +/- 0.22 exceeded the expected aperture averaged value of less than 0.1, probably because of beam wander. The focused spot sizes of approx. 162 +/- 6 microns at the TMF Coude and approx. 64 +/- 3 microns on the OCD compare to the predicted size range of 52 - 172 microns and 57 - 93 microns, respectively. This is consistent with 4 - 5 arcsec of atmospheric "seeing". The preliminary evaluation of OCD's fine tracking indicates that the uncompensated tracking error is approx. 3.3 micro rad compared to approx. 1.7 micro rad observed in the laboratory. Fine tracking performance was intermittent, primarily due to beacon fades on the OCD tracking sensor. The best bit error rates observed while tracking worked were 1E-5 to 1E-6.

Traveling Magnetic Field Applications for Materials Processing in Space

NASA Technical Reports Server (NTRS)

Motakef, S.; Grugel, R. N.; Mazuruk, K.; Whitaker, Ann F. (Technical Monitor)

2001-01-01

Including the capability to induce a controlled fluid flow in the melt can significantly enrich research on solidification phenomena in a microgravity environment. The traveling magnetic field (TMF) is a promising technique to achieve this goal and is the aim of our ground-based project. In this presentation we will discuss new theoretical as well as experimental results recently obtained by our group. In particular, we experimentally demonstrated efficient mixing of metal alloys in long tubes subjected to TMF during processing. Application of this technique can be an elegant solution to ensure melt homogenization prior to solidification in a microgravity environment where natural convection is generally absent. Results of our theoretical work on TMF induced flows, such as convection control in Bridgman as well as in the Traveling Heater method, will be presented. Possible applications of TMF on board the ISS will also be discussed.

Traditional Masculinity and Femininity: Validation of a New Scale Assessing Gender Roles

PubMed Central

Kachel, Sven; Steffens, Melanie C.; Niedlich, Claudia

2016-01-01

Gender stereotype theory suggests that men are generally perceived as more masculine than women, whereas women are generally perceived as more feminine than men. Several scales have been developed to measure fundamental aspects of gender stereotypes (e.g., agency and communion, competence and warmth, or instrumentality and expressivity). Although omitted in later version, Bem's original Sex Role Inventory included the items “masculine” and “feminine” in addition to more specific gender-stereotypical attributes. We argue that it is useful to be able to measure these two core concepts in a reliable, valid, and parsimonious way. We introduce a new and brief scale, the Traditional Masculinity-Femininity (TMF) scale, designed to assess central facets of self-ascribed masculinity-femininity. Studies 1–2 used known-groups approaches (participants differing in gender and sexual orientation) to validate the scale and provide evidence of its convergent validity. As expected the TMF reliably measured a one-dimensional masculinity-femininity construct. Moreover, the TMF correlated moderately with other gender-related measures. Demonstrating incremental validity, the TMF predicted gender and sexual orientation in a superior way than established adjective-based measures. Furthermore, the TMF was connected to criterion characteristics, such as judgments as straight by laypersons for the whole sample, voice pitch characteristics for the female subsample, and contact to gay men for the male subsample, and outperformed other gender-related scales. Taken together, as long as gender differences continue to exist, we suggest that the TMF provides a valuable methodological addition for research into gender stereotypes. PMID:27458394

Objective Evaluation Tool for Texture-Modified Food (OET-TMF): Development of the Tool and Validation.

PubMed

Calleja-Fernández, Alicia; Pintor-de-la-Maza, Begoña; Vidal-Casariego, Alfonso; Cano-Rodríguez, Isidoro; Ballesteros-Pomar, María D

2016-06-01

Texture-modified diets (TMDs) should fulfil nutritional goals, guarantee homogenous texture, and meet food safety regulations. The food industry has created texture-modified food (TMF) that meets the TMD requirements of quality and safety for inpatients. To design and develop a tool that allows the objective selection of foodstuffs for TMDs that ensures nutritional requirements and swallowing safety of inpatients in order to improve their quality of life, especially regarding their food satisfaction. An evaluation tool was designed to objectively determine the adequacy of food included in the TMD menus of a hospital. The "Objective Evaluation Tool for Texture-Modified Food" (OET-TMF) consists of seven items that evaluate the food's nutritional quality (energy and protein input), presence of allergens, texture and viscosity, cooking, storage type, useful life, and patient acceptance. The total score ranged from 0 to 64 and was divided into four categories: high quality, good quality, medium quality, and low quality. Studying four different commercial TMFs contributed to the validation of the tool. All the evaluated products scored between high and good regarding quality. There was a tendency (p = 0.077) towards higher consumption and a higher overall quality of the product obtained with the OET-TMF. The product that scored highest with the tool was the best accepted; the product with the lowest score had the highest rate of refusal. The OET-TMF allows for the objective discrimination of the quality of TMF. In addition, it shows a certain relationship between the observed and assessed quality intake.

Effects of Traveling Magnetic Field on Dynamics of Solidification

NASA Technical Reports Server (NTRS)

2003-01-01

The Lorentz body force induced in electrically conducting fluids can be utilized for a number of materials processing technologies. An application of strong static magnetic fields can be beneficial for damping convection present during solidification. On the other hand, alternating magnetic fields can be used to reduce as well as to enhance convection. However, only special types of time dependent magnetic fields can induce a non-zero time averaged Lorentz force needed for convection control. One example is the rotating magnetic field. This field configuration induces a swirling flow in circular containers. Another example of a magnetic field configuration is the traveling magnetic field (TMF). It utilizes axisymmetric magnetostatic waves. This type of field induces an axial recirculating flow that can be advantageous for controlling axial mass transport, such as during solidification in long cylindrical tubes. Incidentally, this is the common geometry for crystal growth research. The Lorentz force induced by TMF can potentially counter-balance the buoyancy force, diminishing natural convection, or even setting up the flow in reverse direction. Crystal growth process in presence of TMF can be then significantly modified. Such properties as the growth rate, interface shape and macro segregation can be affected and optimized. Melt homogenization is the other potential application of TMF. It is a necessary step prior to solidification. TMF can be attractive for this purpose, as it induces a basic flow along the axis of the ampoule. TMF can be a practical alloy mixing method especially suited for solidification research in space. In the theoretical part of this work, calculations of the induced Lorentz force in the whole frequency range have been completed. The basic flow characteristics for the finite cylinder geometry are completed and first results on stability analysis for higher Reynolds numbers are obtained. A theoretical model for TMF mixing is also developed. In the experimental part, measurements of flow induced by TMF in a column of mercury (Hg) are presented. Also, an alloy mixing of Bi-Sn of the eutectic composition is demonstrated. A traveling magnetic field of 4mT at 3kHz applied for 120 minutes is found to be sufficient to homogenize an alloy enclosed in a 1cm diameter and 12 cm long tube.

Inducing Lift on Spherical Particles by Traveling Magnetic Fields

NASA Technical Reports Server (NTRS)

Mazuruk, Konstantin; Grugel, Richard N.; Rose, M. Franklin (Technical Monitor)

2001-01-01

Gravity induced sedimentation of suspensions is a serious drawback to many materials and biotechnology processes, a factor that can, in principle, be overcome by utilizing an opposing Lorentz body force. In this work we demonstrate the utility of employing a traveling magnetic field (TMF) to induce a lifting force on particles dispersed in the fluid. Theoretically, a model has been developed to ascertain the net force, induced by TMF, acting on a spherical body as a function of the fluid medium's electrical conductivity and other parameters. Experimentally, the model is compared to optical observations of particle motion in the presence of TMF.

Inducing Lift on Spherical Particles by Traveling Magnetic Fields

NASA Technical Reports Server (NTRS)

Mazuruk, Konstantin; Grugel, Richard N.; Rose, M. Franklin (Technical Monitor)

2000-01-01

Gravity induced sedimentation of suspensions is a serious drawback to many materials and biotechnology processes, a factor that can, in principle, be overcome by utilizing an opposing Lorentz body force. In this work we demonstrate the utility of employing a traveling magnetic field (TMF) to induce a lifting force on particles dispersed in the fluid. Theoretically, a model has been developed to ascertain the net force, induced by TMF, acting on a spherical body as a function of the fluid medium's electrical conductivity and other parameters. Experimentally, the model is compared to optical observations of particle motion in the presence of TMF.

Thermomechanical Fatigue Durability of T650-35/PMR-15 Sheet-Molding Compound Evaluated

NASA Technical Reports Server (NTRS)

Castelli, Michael G.

1999-01-01

High-performance polymer matrix composites (PMC's) continue to be the focus of a number of research efforts aimed at developing cost-effective, lightweight material alternatives for advanced aerospace and aeropropulsion applications. These materials not only offer significant advantages in specific stiffness and strength over their current metal counterparts, but they can be designed and manufactured to eliminate joints and fasteners by combining individual components into integral subassemblies, thus making them extremely attractive for commercial applications. With much emphasis on the low-cost manufacturing aspects of advanced composite structures, there is heightened interest in high-performance sheet-molding compounds (SMC's). Researchers at the NASA Lewis Research Center, in cooperation with the Allison Advanced Development Company, completed an investigation examining the use of T650-35/PMR-15 SMC for a midstage inner-vane endwall application within a gas turbine engine compressor. This component resides in the engine flow path and is subjected not only to high airflow rates, but also to elevated temperatures and pressures. This application is unique in that it represents a very aggressive use of high-performance SMC's, raising obvious concerns related to durability and property retention in the presence of microstructural damage. Therefore, it was necessary to evaluate the fatigue behavior and damage tolerance of this material subjected to a representative thermomechanical fatigue (TMF) mission-cycle loading spectrum.

75 FR 61788 - Triangle Capital Corporation, et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... to the issuers of such securities. 2. TMF, a North Carolina limited liability limited partnership, is... same investment objectives and strategies as Triangle. Triangle owns a 99.9% limited partnership... persons who are interested persons of TMF. 3. SBIC II, a Delaware limited partnership, is an SBIC licensed...

Using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) to explore geochemical taphonomy of vertebrate fossils in the upper cretaceous two medicine and Judith River formations of Montana

USGS Publications Warehouse

Rogers, R.R.; Fricke, H.C.; Addona, V.; Canavan, R.R.; Dwyer, C.N.; Harwood, C.L.; Koenig, A.E.; Murray, R.; Thole, J.T.; Williams, J.

2010-01-01

Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) was used to determine rare earth element (REE) content of 76 fossil bones collected from the Upper Cretaceous (Campanian) Two Medicine (TMF) and Judith River (JRF) Formations of Montana. REE content is distinctive at the formation scale, with TMF samples exhibiting generally higher overall REE content and greater variability in REE enrichment than JRF samples. Moreover, JRF bones exhibit relative enrichment in heavy REE, whereas TMF bones span heavy and light enrichment fields in roughly equal proportions. TMF bones are also characterized by more negative Ce anomalies and greater U enrichment than JRF bones, which is consistent with more oxidizing diagenetic conditions in the TMF. Bonebeds in both formations show general consistency in REE content, with no indication of spatial or temporal mixing within sites. Previous studies, however, suggest that the bonebeds in question are attritional assemblages that accumulated over considerable time spans. The absence of geochemical evidence for mixing is consistent with diagenesis transpiring in settings that remained chemically and hydrologically stable during recrystallization. Lithology-related patterns in REE content were also compared, and TMF bones recovered from fluvial sandstones show relative enrichment in heavy REE when compared with bones recovered from fine-grained floodplain deposits. In contrast, JRF bones, regardless of lithologic context (sandstone versus mudstone), exhibit similar patterns of REE uptake. This result is consistent with previous reconstructions that suggest that channel-hosted microfossil bonebeds of the JRF developed via the reworking of preexisting concentrations embedded in the interfluve. Geochemical data further indicate that reworked elements were potentially delivered to channels in a recrystallized condition, which is consistent with rapid adsorption of REE postmortem. Copyright ?? 2010, SEPM (Society for Sedimentary Geology).

Tangeretin and its metabolite 4'-hydroxytetramethoxyflavone attenuate EGF-stimulated cell cycle progression in hepatocytes; role of inhibition at the level of mTOR/p70S6K.

PubMed

Cheng, Z; Surichan, S; Ruparelia, K; Arroo, R; Boarder, M R

2011-04-01

The mechanisms by which the dietary compound tangeretin has anticancer effects may include acting as a prodrug, forming an antiproliferative product in cancer cells. Here we show that tangeretin also inhibits cell cycle progression in hepatocytes and investigate the role of its primary metabolite 4'-hydroxy-5,6,7,8-tetramethoxyflavone (4'-OH-TMF) in this effect. We used epidermal growth factor (EGF)-stimulated rat hepatocytes, with [(3)H]-thymidine incorporation into DNA as an index of progression to S-phase of the cell cycle, and Western blots for phospho-proteins involved in the cell signalling cascade. Incubation of tangeretin with microsomes expressing CYP1A, or with hepatocytes, generated a primary product we identified as 4'-OH-TMF. Low micromolar concentrations of tangeretin or 4'-OH-TMF gave a concentration-dependent inhibition of EGF-stimulated progression to S-phase while having little effect on cell viability. To determine whether time for conversion of tangeretin to an active metabolite would enhance the inhibitory effect we used long pre-incubations; this reduced the inhibitory effect, in parallel with a reduction in the concentration of tangeretin. The EGF-stimulation of hepatocyte cell cycle progression requires signalling through Akt/mTOR/p70S6K kinase cascades. The tangeretin metabolite 4'-OH-TMF selectively inhibited S6K phosphorylation in the absence of significant inhibition of upstream Akt activity, suggesting an effect at the level of mTOR. Tangeretin and 4'-OH-TMF both inhibit cell cycle progression in primary hepatocytes. The inhibition of p70S6K phosphorylation by 4'-OH-TMF raises the possibility that inhibition of the mTOR pathway may contribute to the anticancer influence of a flavonoid-rich diet. © 2011 The Authors. British Journal of Pharmacology © 2011 The British Pharmacological Society.

MRI-based IMRT planning for MR-linac: comparison between CT- and MRI-based plans for pancreatic and prostate cancers

NASA Astrophysics Data System (ADS)

Prior, Phil; Chen, Xinfeng; Botros, Maikel; Paulson, Eric S.; Lawton, Colleen; Erickson, Beth; Li, X. Allen

2016-05-01

The treatment planning in radiation therapy (RT) can be arranged to combine benefits of computed tomography (CT) and magnetic resonance imaging (MRI) together to maintain dose calculation accuracy and improved target delineation. Our aim is study the dosimetric impact of uniform relative electron density assignment on IMRT treatment planning with additional consideration given to the effect of a 1.5 T transverse magnetic field (TMF) in MR-Linac. A series of intensity modulated RT (IMRT) plans were generated for two representative tumor sites, pancreas and prostate, using CT and MRI datasets. Representative CT-based IMRT plans were generated to assess the impact of different electron density (ED) assignment on plan quality using CT without the presence of a 1.5 T TMF. The relative ED (rED) values used were taken from the ICRU report 46. Four types of rED assignment in the organs at risk (OARs), the planning target volumes (PTV) and in the non-specified tissue (NST) were considered. Dose was recalculated (no optimization) using a Monaco 5.09.07a research planning system employing Monte Carlo calculations with an option to include TMF. To investigate the dosimetric effect of different rED assignment, the dose-volume parameters (DVPs) obtained from these specific rED plans were compared to those obtained from the original plans based on CT. Overall, we found that uniform rED assignment results in differences in DVPs within 3% for the PTV and 5% for OAR. The presence of 1.5 T TMF on IMRT DVPs resulted in differences that were generally within 3% of the Gold St for both the pancreas and prostate. The combination of uniform rED assignment and TMF produced differences in DVPs that were within 4-5% of the Gold St. Larger differences in DVPs were observed for OARs on T2-based plans. The effects of using different rED assignments and the presence of 1.5 T TMF for pancreas and prostate IMRT plans are generally within 3% and 5% of PTV and OAR Gold St values. There are noticeable dosimetric differences between the CT- and MRI-based IMRT plans caused by a combination of anatomical changes between the two image acquisition times, uniform rED assignment and 1.5 T TMF. This work was present in part at the 2014 ASTRO annual meeting.

Evidence for submarine landslides and continental slope erosion related to fault reactivation during the last glaciation offshore eastern Canada

NASA Astrophysics Data System (ADS)

Saint-Ange, F.; Campbell, C.; MacKillop, K.; Mosher, D. C.; Piper, D. J.; Roger, J.

2012-12-01

Many studies have proposed that reactivation of dormant faults during deglaciation is a source of neotectonic activity in glaciated regions, but few have demonstrated the relationship to submarine landslides. In this study, seabed morphology and shallow geology of the outer continental margin adjacent to the Charlie Gibbs Fracture Zone off Newfoundland, Canada was investigated for evidence of this relationship. The glacial history and morphology of the margin suggest that the entire continental shelf in the area, coincident with major continental crustal lineaments, was ice-covered during the Last glacial cycle, and transverse troughs delineate the paleo-icestream drainage patterns. A recent investigation of Notre Dame Trough revealed the existence of large sediment failures on the shelf. The current study investigates complex seafloor erosion and widespread mass transport deposition (MTD) on the continental slope seaward of Notre Dame Trough, using recently-acquired high resolution seismic reflection data and piston cores. The new data reveal that a trough mouth fan (TMF) is present on the slope seaward of Notre Dame Trough. The Notre Dame TMF is characterized by a succession of stacked debris flows, but does not show a lobate shape in plan view like other classic TMFs. Instead, the Notre Dame TMF has abruptly-truncated margins suggesting post-depositional failure and erosion of the fan deposits. Seismic reflection data show that the locations of the failures along the TMF margin are coincident with a set of shallow faults; however the current dataset does not image the deeper portion of the faults. On the upper slope immediately south of the TMF, a narrow and deeply incised canyon is located along-trend with the Notre Dame Trough. The location of this canyon appears to be controlled by a fault. Downslope from this canyon, along the southern margin of the TMF, a 25 km wide, flat-floored, U-shaped valley was eroded into a succession of stacked MTD-filled channels. Seismic stratigraphic analysis shows that the valley developed around the same time as the adjacent TMF, however, the valley morphology and evidence for repeated slope failure suggests that the processes responsible for its formation were different than the processes that formed the nearby TMF. Age control provided from piston cores suggest that the last major slope failure that contributed to valley formation probably occurred at ~29 ka. Geotechnical measurements from piston cores show slightly underconsolidated sediments. The results indicate that this part of the margin is more unstable than Orphan Basin and Labrador slope regions. Given the low factor of safety and the complex fault system, low energy earthquake from the surrounding area could be enough to potentially trigger landslides.

Materials research for High Speed Civil Transport and generic hypersonics: Adhesive durability

NASA Technical Reports Server (NTRS)

Allen, Mark R.

1995-01-01

This report covers a portion of an ongoing investigation of the durability of adhesives for the High Speed Civil Transport (HSCT) program. Candidate HSCT adhesives need to possess the high-temperature capability required for supersonic flight. This program was designed to initiate an understanding of the behavior of candidate HSCT materials when subjected to combined mechanical and thermal loads. Two adhesives (K3A and FM57) and two adherends (IM7/K3B polymeric composite and the titanium alloy Ti-6Al-4V) were used to fabricate thick adherend lap shear specimens. Due to processing problems, only the FM57/titanium bonds could be fabricated successfully. These are currently undergoing thermomechanical fatigue (TMF) testing. There is an acute need for an adhesive to secondarily bond polymeric composite adherends or, alternately, polymeric composites that remain stable at the processing temperatures of today's adhesives.

High-performance Thin-layer Chromatography Method Development, Validation, and Simultaneous Quantification of Four Compounds Identified in Standardized Extracts of Orthosiphon stamineus.

PubMed

Hashim, Suzana; Beh, Hooi Kheng; Hamil, Mohamad Shahrul Ridzuan; Ismail, Zhari; Majid, Amin Malik Shah Abdul

2016-01-01

Orthosiphon stamineus is a medicinal herb widely grown in Southeast Asia and tropical countries. It has been used traditionally as a diuretic, abdominal pain, kidney and bladder inflammation, gout, and hypertension. This study aims to develop and validate the high-performance thin layer chromatography (HPTLC) method for quantification of rosmarinic acid (RA), 3'-hydroxy-5,6,7,4'-tetramethoxyflavone (TMF), sinensitin (SIN) and eupatorin (EUP) found in ethanol, 50% ethanol and water extract of O. stamineus leaves. HPTLC method was conducted using an HPTLC system with a developed mobile phase system of toluene: ethyl acetate: formic acid (3:7:0.1) performed on precoated silica gel 60 F254 TLC plates. The method was validated based on linearity, accuracy, precision, limit of detection, limit of quantification (LOQ), and specificity, respectively. The detection of spots was observed at ultraviolet 254 nm and 366 nm. The linearity of RA, TMF, SIN, and EUP were obtained between 10 and 100 ng/spot with high correlation coefficient value (R 2 ) of more than 0.986. The limit of detection was found to be 122.47 ± 3.95 (RA), 43.38 ± 0.79 (SIN), 17.26 ± 1.16 (TMF), and 46.80 ± 1.33 ng/spot (EUP), respectively. Whereas the LOQ was found to be 376.44 ± 6.70 (RA), 131.45 ± 2.39 (SIN), 52.30 ± 2.01 (TMF), and 141.82 ± 1.58 ng/spot (EUP), respectively. The proposed method showed good linearity, precision, accuracy, and high sensitivity. Hence, it may be applied in a routine quantification of RA, SIN, TMF, and EUP found in ethanol, 50% of ethanol and water extract of O. stamineus leaves. HPTLC method provides rapid estimation of the marker compound for routine quality control analysis.The established HPTLC method is rapid for qualitative and quantitative fingerprinting of Orthosiphon stamineus extract used for commercial product.Four identified markers (RA, SIN, EUP and TMF) found in three a different type of O. stamineus extracts specifically ethanol, 50% ethanol and water extract were successfully quantified using HPTLC method. Abbreviations Used : HPTLC: High-performance thin layer chromatography; RA: Rosmarinic acid; TMF: 3'-hydroxy-5,6,7,4'-tetramethoxyflavone; SIN: Sinensitin; EUP: Eupatorin; E: Ethanol; EW: 50% ethanol; W: Water; BK: Batu Kurau; KB: Kepala Batas; S: Sik; CJ: Changkat Jering; SB: Sungai Buloh.

Stratospheric Ozone Intercomparison Campaign (STOIC) 1989: Overview

NASA Technical Reports Server (NTRS)

Margitan, J. J.; Barnes, R. A.; Brothers, G. B.; Butler, J.; Burris, J.; Connor, B. J.; Ferrare, R. A.; Kerr, J. B.; Komhyr, W. D.; McCormick, M. P.;

Morphobiochemical diagnosis of acute trabecular microfractures using gamma correction Tc-99m HDP pinhole bone scan with histopathological verification.

PubMed

Bahk, Yong-Whee; Hwang, Seok-Ha; Lee, U-Young; Chung, Yong-An; Jung, Joo-Young; Jeong, Hyeonseok S

2017-11-01

We prospectively performed gamma correction pinhole bone scan (GCPBS) and histopathologic verification study to make simultaneous morphobiochemical diagnosis of trabecular microfractures (TMF) occurred in the femoral head as a part of femoral neck fracture.Materials consisted of surgical specimens of the femoral head in 6 consecutive patients. The specimens were imaged using Tc-99m hydroxymethylene diphosphonate (HDP) pinhole scan and processed by the gamma correction. After cleansing with 10% formalin solution, injured specimen surface was observed using a surgical microscope to record TMF. Morphological findings shown in the photograph, naive pinhole bone scan, GCPBS, and hematoxylin-eosin (H&E) stain of the specimen were reciprocally correlated for histological verification and the usefulness of suppression and enhancement of Tc-99m HDP uptake was biochemically investigated in TMF and edema and hemorrhage using gamma correction.On the one hand, GCPBS was able to depict the calcifying calluses in TMF with enhanced Tc-99m HDP uptake. They were pinpointed, speckled, round, ovoid, rod-like, geographic, and crushed in shape. The smallest callus measured was 0.23 mm in this series. On the other hand, GCPBS biochemically was able to discern the calluses with enhanced high Tc-99m HDP uptake from the normal and edema dipped and hemorrhage irritated trabeculae with washed out uptake.Morphobiochemically, GCPBS can clearly depict microfractures in the femoral head produced by femoral neck fracture. It discerns the microcalluses with enhanced Tc-99m HDP uptake from the intact and edema dipped and hemorrhage irritated trabeculae with suppressed washed out Tc-99m HDP uptake. Both conventional pinhole bone scan and gamma correction are useful imaging means to specifically diagnose the microcalluses naturally formed in TMF.

Transverse magnetic field effect on the giant Goos–Hänchen shifts based on a degenerate two-level system

NASA Astrophysics Data System (ADS)

Nasehi, R.

2018-06-01

We study the effect of the Goos–Hänchen (GH) shifts through a cavity with degenerate two-level systems in the line of . For this purpose, we focus on the transverse magnetic field (TMF) in a Floquet frame to obtain the giant GH shifts. Physically, the collisional effects of TMF lead to increasing the population trapping in the ground state. However, we demonstrate that the population trapping generates the large negative or positive GH shifts and simultaneously switches from superluminal to subluminal (or vice versa). Also, we investigate the other optical properties such as the longitudinal magnetic field (LMF), which plays an important role in the control of the GH shifts and leads to the generation of new subsystems. In the next step, we evaluate the GH shifts beyond the multi-photon resonance condition by the control of TMF. Moreover, we compute the appearance of negative and positive GH shifts by setting the width of the incident Gaussian beams in the presence of a multi-photon resonance condition. Our results show that superluminal or subluminal light propagation can be simultaneously controlled by adjusting the rates of the TMF and LMF. The significant effects of these factors on the degenerate two-level systems provide different applications such as slow light, optical switches and quantum information storage.

Predicting arsenic concentrations in porewaters of buried uranium mill tailings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langmuir, D.; Mahoney, J.; MacDonald, A.

The proposed JEB Tailings Management Facility (TMF) to be emplaced below the groundwater table in northern Saskatchewan, Canada, will contain uranium mill tailings from McClean Lake, Midwest and Cigar Lake ore bodies, which are high in arsenic (up to 10%) and nickel (up to 5%). A serious concern is the possibility that high arsenic and nickel concentrations may be released from the buried tailings, contaminating adjacent groundwaters and a nearby lake. Laboratory tests and geochemical modeling were performed to examine ways to reduce the arsenic and nickel concentrations in TMF porewaters so as to minimize such contamination from tailings buriedmore » for 50 years and longer. The tests were designed to mimic conditions in the mill neutralization circuit (3 hr tests at 25 C), and in the TMF after burial (5--49 day aging tests). The aging tests were run at 50, 25 and 4 C (the temperature in the TMF). In order to optimize the removal of arsenic by adsorption and precipitation, ferric sulfate was added to tailings raffinates having Fe/As ratios of less than 3--5. The acid raffinates were then neutralized by addition of slaked lime to nominal pH values of 7, 8, or 9. Analysis and modeling of the test results showed that with slaked lime addition to acid tailings raffinates, relatively amorphous scorodite (ferric arsenate) precipitates near pH 1, and is the dominant form of arsenate in slake limed tailings solids except those high in Ni and As and low in Fe, in which cabrerite-annabergite (Ni, Mg, Fe(II) arsenate) may also precipitate near pH 5--6. In addition to the arsenate precipitates, smaller amounts of arsenate are also adsorbed onto tailings solids. The aging tests showed that after burial of the tailings, arsenic concentrations may increase with time from the breakdown of the arsenate phases (chiefly scorodite). However, the tests indicate that the rate of change decreases and approaches zero after 72 hrs at 25 C, and may equal zero at all times in the TMF at 4 C. Consistent with a kinetic model that describes the rate of breakdown of scorodite to form hydrous ferric oxide, the rate of release of dissolved arsenate to tailings porewaters from slake limed tailings: (1) is proportional to pH above pH 6--7; (2) decreases exponentially as the total molar Fe/As ratio of tailings raffinates is increased from 1/1 to greater than 5/1; and (3) is proportional to temperature with an average Arrhenius activation energy of 13.4 {+-} 4.2 kcal/mol. Study results suggest that if ferric sulfate and slaked lime are added in the tailings neutralization circuit to give a raffinate Fe/As molar ratio of at least 3--5 and a nominal (initial) pH of 8 (final pH of 7--8), arsenic and nickel concentrations of 2 mg/L or less, are probable in porewaters of individual tailings in the TMF for 50 to 10,000 yrs after tailings disposal. However, the tailings will be mixed in the TMF, which will contain about 35% tailings with Fe/As = 3.0, and 65% tailings with Fe/As = 5.0--7.7. Thus, it seems likely that average arsenic pore water concentrations in the TMF may not exceed 1 mg/L.« less

Interdependence of right ventricular systolic function and left ventricular filling and its association with outcome for patients with pulmonary hypertension.

PubMed

Motoji, Yoshiki; Tanaka, Hidekazu; Fukuda, Yuko; Sano, Hiroyuki; Ryo, Keiko; Imanishi, Junichi; Miyoshi, Tatsuya; Sawa, Takuma; Mochizuki, Yasuhide; Matsumoto, Kensuke; Emoto, Noriaki; Hirata, Ken-ichi

2015-04-01

Although impaired right ventricular (RV) performance has been associated with adverse outcomes for pulmonary hypertension (PH) patients, the relationship between bi-ventricular interdependence and outcomes is not yet fully understood. We studied 96 PH patients. RV systolic function was assessed by means of RV free-wall longitudinal speckle-tracking strain (RV-free), and left ventricular (LV) filling as early diastolic transmitral flow velocity (TMF-E). RV-free ≤19 % and TMF-E <60 cm/s were adopted as pre-defined cut-offs for RV systolic dysfunction and LV under-filling, respectively, associated with worse outcomes. Long-term outcome was tracked over 2.2 years. RV-free correlated significantly with TMF-E (r = 0.57, p < 0.001).TMF-E and RV-free were significantly lower in patients with than in those without cardiac events. RV systolic dysfunction and LV under-filling was observed in 35 patients. These features were associated with worse long-term survival compared to other sub-groups (log-rank p = 0.012). A sequential Cox model based on clinical variables including world health organization functional class IV and brain natriuretic peptide >150 pg/dl (χ(2) = 1.2) was improved by the addition of RV-free (χ(2) = 5.5, p = 0.04) as well as of TMF-E (χ(2) = 11.5, p = 0.01). In conclusions, RV systolic function was shown to correlate significantly with LV filling in PH patients. In addition, not only assessment of RV systolic function, but also of a combined bi-ventricular parameter comprising RV systolic function and LV filling may well have clinical implications for more successful management of PH patients.

Intelligent Life-Extending Controls for Aircraft Engines

NASA Technical Reports Server (NTRS)

Guo, Ten-Huei; Chen, Philip; Jaw, Link

2005-01-01

Aircraft engine controllers are designed and operated to provide desired performance and stability margins. The purpose of life-extending-control (LEC) is to study the relationship between control action and engine component life usage, and to design an intelligent control algorithm to provide proper trade-offs between performance and engine life usage. The benefit of this approach is that it is expected to maintain safety while minimizing the overall operating costs. With the advances of computer technology, engine operation models, and damage physics, it is necessary to reevaluate the control strategy fro overall operating cost consideration. This paper uses the thermo-mechanical fatigue (TMF) of a critical component to demonstrate how an intelligent engine control algorithm can drastically reduce the engine life usage with minimum sacrifice in performance. A Monte Carlo simulation is also performed to evaluate the likely engine damage accumulation under various operating conditions. The simulation results show that an optimized acceleration schedule can provide a significant life saving in selected engine components.

Flux and stable C and N isotope composition of sinking particles in the Ulleung Basin of the East/Japan Sea

NASA Astrophysics Data System (ADS)

Hyun Kwak, Jung; Han, Eunah; Hwang, Jeomshik; Kim, Young, II; Lee, Chung Il; Kang, Chang-Keun

2017-09-01

Seasonal variability of sinking fluxes of total mass (TMF), particulate organic carbon and nitrogen (POC and PON) was examined using sinking particles collected from sediment traps during July 2011 to December 2011, and December 2012 to June 2013 at an offshore channel site; and from November 2013 to August 2014 at a nearshore slope site of the Ulleung Basin in the East/Japan Sea. δ13C and δ15N values of sinking particles were measured to elucidate the major export processes of POC and PON. Annual TMF (112-638 g m-2 yr-1) and fluxes of POC and PON (9.6-32.1 g C m-2 yr-1 and 1.2-4.5 g N m-2 yr-1, respectively) in the Ulleung Basin corresponded to the upper limit of values reported for other open seas and oceans in the world. No great seasonal variability in both quantitative (TMF, and fluxes and contents of POC and PON) and qualitative (C/N ratios, and δ13C and δ15N values) estimates of vertical fluxes was observed, reflecting a steady standing stock of chlorophyll a in the upper part of water column. Furthermore, high contents of POC and PON and nearly constant δ13C and δ15N values in sinking particles collected in the sediment traps, indicate that primary production in the euphotic zone may be a good predictor of TMF and export flux of organic matter. In this regard, our pilot study points out the importance of high annual primary production and low water temperature (<1 °C) beneath the 200-m water depth, which would enable more sinking particles to be preserved during export process by limiting microbial decomposition activity in the water column, in determining the high annual flux of sinking particles in the Ulleung Basin (UB). A simple stable isotope mixing model of sinking particles indicates that despite a slight seasonal variation, the contribution of intact phytoplankton to sinking organic flux is significant to the POC and PON flux in the UB. Further continuous time series sediment trap experiments are proposed to estimate the contribution of allochthonus sources such as lateral advection through resuspended clay mineral, and aeolian and terrestrial inputs to the sedimentary flux.

Seismic stratigraphic architecture of the Disko Bay trough-mouth fan system, West Greenland

NASA Astrophysics Data System (ADS)

Hofmann, Julia C.; Knutz, Paul C.

2015-04-01

Spatial and temporal changes of the Greenland Ice Sheet on the continental shelf bordering Baffin Bay remain poorly constrained. Then as now, fast-flowing ice streams and outlet glaciers have played a key role for the mass balance and stability of polar ice sheets. Despite their significance for Greenland Ice Sheet dynamics and evolution, our understanding of their long-term behaviour is limited. The central West Greenland margin is characterized by a broad continental shelf where a series of troughs extend from fjords to the shelf margin, acting as focal points for trough-mouth fan (TMF) accummulations. The sea-ward bulging morphology and abrupt shelf-break of these major depositional systems is generated by prograding depocentres that formed during glacial maxima when ice streams reached the shelf edge, delivering large amounts of subglacial sediment onto the continental slope (Ó Cofaigh et al., 2013). The aim of this study is to unravel the seismic stratigraphic architecture and depositional processes of the Disko Bay TMF, aerially the largest single sedimentary system in West Greenland, using 2D and 3D seismic reflection data, seabed bathymetry and stratigraphic information from exploration well Hellefisk-1. The south-west Disko Bay is intersected by a deep, narrow trough, Egedesminde Dyb, which extends towards the southwest and links to the shallower and broader cross-shelf Disko Trough (maximum water depths of > 1000 m and a trough length of c. 370 km). Another trough-like depression (trough length of c. 120 km) in the northern part of the TMF, indicating a previous position of the ice stream, can be distinguished on the seabed topographic map and the seismic images. The Disko Bay TMF itself extends from the shelf edge down to the abyssal plain (abyssal floor depths of 2000 m) of the southern Baffin Bay. Based on seismic stratigraphic configurations relating to reflection terminations, erosive patterns and seismic facies (Mitchum et al., 1977), the TMF succession has been divided into five seismic units, each representing different stages in the progradational accumulation of the TMF system. This poster and ongoing study will discuss how the ice-stream flow switching is linked to changes in depocentres of sedimentary sequences and further investigate the major controls, e.g. ice-sheet dynamics, ocean-climate changes, tectonic forcing and subglacial geology, that determined the evolution of the Disko Bay TMF. Essencial bibliography Mitchum, R.M. Jr., Vail, P.R., Sangree, J.B., 1977. Seismic stratigraphy and global changes of sea level, Part 6: Stratigraphic interpretation of seismic reflection patterns in depositional sequences. AAPG Memoir 26, 117-133. Ó Cofaigh, C., Andrews, J.T., Jennings, A.E., Dowdeswell, J.A., Hogan, K.A., Kilfeather, A.A., Sheldon, C., 2013. Glacimarine lithofacies, provenance and depositional processes on a West Greenland trough-mouth fan. Journal of Quaternary Science, 28(1), 13-26.

Stratospheric Ozone Climatology from Lidar Measurements at Table Mountain (34.0 deg N, 117.7 deg W) and Mauna Loa (19.5 deg N, 155.6 deg W)

NASA Technical Reports Server (NTRS)

Leblanc, T.; McDermid, I. S.

2000-01-01

Using more than 1600 nighttime profiles obtained by the JPL differential absorption lidars (DIAL) located at Table Mountain Facility (TMF, 34.4 N) and Mauna Loa Observatory (MLO, 19.5 N) is presented in this paper. These two systems have been providing high-resolution vertical profiles of ozone number density between 15-50 km, several nights a week since 1989 (TMF) and 1993 (MLO). The climatology presented here is typical of early night ozone values with only a small influence of the Pinatubo aerosols and the 11-year solar cycle. The observed seasonal and vertical structure of the ozone concentration at TMF is consistent with that typical of mid- to subtropical latitudes. A clear annual cycle in opposite phase below and above the ozone concentration peak is observed. The observed winter maximum below the ozone peak is associated with a maximum day-to-day variability, typical of a dynamically driven lower stratosphere. The maximum concentration observed in summer above the ozone peak emphasizes the more dominant role of photochemistry. Unlike TMF, the ozone concentration observed at MLO tends to be higher during the summer months and lower during the winter months throughout the entire stratospheric ozone layer. Only a weak signature of the extra-tropical latitudes is observed near 19-20 km, with a secondary maximum in late winter. The only large variability observed at MLO is associated with the natural variability of the tropical tropopause.

Thermomechanical testing of high-temperature composites - Thermomechanical fatigue (TMF) behavior of SiC(SCS-6)/Ti-15-3

NASA Technical Reports Server (NTRS)

Castelli, Michael G.; Bartolotta, Paul; Ellis, John R.

1992-01-01

Thermomechanical testing techniques recently developed for monolithic structural alloys were successfully extended to continuous fiber reinforced composite materials in plate form. The success of this adaptation was verified on a model metal matrix composite (MMC) material, namely SiC(SCS-6)/Ti-15V-3Cr-3Al-3Sn. Effects of heating system type and specimen preparation are also addressed. Cyclic lives determined under full thermomechanical conditions were shown to be significantly reduced from those obtained under comparable isothermal and in-phase bi-thermal conditions. Fractography and metallography from specimens subjected to isothermal, out-of-phase and in-phase conditions reveal distinct differences in damage-failure modes. Isothermal metallography revealed extensive matrix cracking associated with fiber damage throughout the entire cross-section of the specimen. Out-of-phase metallography revealed extensive matrix damage associated with minimal (if any) fiber cracking. However, the damage was located exclusively at surface and near-surface locations. In-phase conditions produced extensive fiber cracking throughout the entire cross-section, associated with minimal (if any) matrix damage.

Lorentz Body Force Induced by Traveling Magnetic Fields

NASA Technical Reports Server (NTRS)

Volz, M. P.; Mazuruk, K.

2003-01-01

The Lorentz force induced by a traveling magnetic field (TMF) in a cylindrical container has been calculated. The force can be used to control flow in dectrically conducting melts and the direction of the magnetic field and resulting flow can be reversed. A TMF can be used to partially cancel flow driven by buoyancy. The penetration of the field into the cylinder decreases as the frequency increases, and there exists an optimal value of frequency for which the resulting force is a maximum. Expressions for the Lorentz force in the limiting cases of low frequency and infinite cylinder are also given and compared to the numerical calculations.

Investigating the Geochemical Model for Molybdenum Mineralization in the JEB Tailings Management Facility at McClean Lake, Saskatchewan: An X-ray Absorption Spectroscopy Study.

PubMed

Blanchard, Peter E R; Hayes, John R; Grosvenor, Andrew P; Rowson, John; Hughes, Kebbi; Brown, Caitlin

2015-06-02

The geochemical model for Mo mineralization in the JEB Tailings Management Facility (JEB TMF), operated by AREVA Resources Canada at McClean Lake, Saskatchewan, was investigated using X-ray Absorption Near-Edge Spectroscopy (XANES), an elemental-specific technique that is sensitive to low elemental concentrations. Twenty five samples collected during the 2013 sampling campaign from various locations and depths in the TMF were analyzed by XANES. Mo K-edge XANES analysis indicated that the tailings consisted primarily of Mo(6+) species: powellite (CaMoO4), ferrimolybdite (Fe2(MoO4)3·8H2O), and molybdate adsorbed on ferrihydrite (Fe(OH)3 - MoO4). A minor concentration of a Mo(4+) species in the form of molybdenite (MoS2) was also present. Changes in the Mo mineralization over time were inferred by comparing the relative amounts of the Mo species in the tailings to the independently measured aqueous Mo pore water concentration. It was found that ferrimolybdite and molybdate adsorbed on ferrihydrite initially dissolves in the TMF and precipitates as powellite.

Comparison of orthorhombic and alpha-two titanium aluminides as matrices for continuous SiC-reinforced composites

NASA Astrophysics Data System (ADS)

Smith, P. R.; Graves, J. A.; Rhodes, Cg.

1994-06-01

The attributes of an orthorhombic Ti aluminide alloy, Ti-21Al-22Nb (at. pct), and an alpha-two Ti aluminide alloy, Ti-24Al-11Nb (at. pct), for use as a matrix with continuous SiC (SCS-6) fiber reinforcement have been compared. Foil-fiber-foil processing was used to produce both unreinforced (“neat”) and unidirectional “SCS-6” reinforced panels. Microstructure of the Ti-24A1-11Nb matrix consisted of ordered Ti3Al ( α 2) + disordered beta (β), while the Ti-21 Al-22Nb matrix contained three phases: α2, ordered beta ( β 0), and ordered orthorhombic (O). Fiber/ matrix interface reaction zone growth kinetics at 982 °C were examined for each composite system. Although both systems exhibited similar interface reaction products (i.e., mixed Ti carbides, silicides, and Ti-Al carbides), growth kinetics in the α 2 + β matrix composite were much more rapid than in the O + β 0 + α 2 matrix composite. Additionally, interfacial reaction in the α 2 + β} composite resulted in a relatively large brittle matrix zone, depleted of beta phase, which was not present in the O + β 0+ α 2 matrix composite. Mechanical property measurements included room and elevated temperature tensile, thermal stability, thermal fatigue, thermo-mechanical fatigue (TMF), and creep. The three-phase orthorhombic-based alloy outperformed the α2+ β alloy in all of these mechanical behavioral areas, on both an absolute and a specific (i.e., density corrected) basis.

An Experimental Investigation of the Effects of Vacuum Environment on the Fatigue Life, Fatigue-Crack-Growth Behavior, and Fracture Toughness of 7075-T6 Aluminum Alloy. Ph.D. Thesis - North Carolina State Univ.

NASA Technical Reports Server (NTRS)

Hudson, C. M.

1972-01-01

Axial load fatigue life, fatigue-crack propagation, and fracture toughness tests were conducted on 0.090-inch thick specimens made of 7075-T6 aluminum alloy. The fatigue life and fatigue-crack propagation experiments were conducted at a stress ratio of 0.02. Maximum stresses ranged from 33 to 60 ksi in the fatigue life experiments, and from 10 to 40 ksi in the fatigue-crack propagation experiments, and fatigue life experiments were conducted at gas pressures of 760, 0.5, 0.05, and 0.00000005 torr. Fatigue-crack-growth and fracture toughness experiments were conducted at gas pressures of 760 and 5 x 10 to the minus 8th power torr. Residual stress measurements were made on selected fatigue life specimens to determine the effect of such stresses on fatigue life. Analysis of the results from the fatigue life experiments indicated that fatigue life progressively increased as the gas pressure decreased. Analysis of the results from the fatigue-crack-growth experiments indicates that at low values of stress-intensity range, the fatigue crack growth rates were approximately twice as high in air as in vacuum. Fracture toughness data showed there was essentially no difference in the fracture toughness of 7075-T6 in vacuum and in air.

Life-Extending Control for Aircraft Engines Studied

NASA Technical Reports Server (NTRS)

Guo, Te-Huei

2002-01-01

Current aircraft engine controllers are designed and operated to provide both performance and stability margins. However, the standard method of operation results in significant wear and tear on the engine and negatively affects the on-wing life--the time between cycles when the engine must be physically removed from the aircraft for maintenance. The NASA Glenn Research Center and its industrial and academic partners have been working together toward a new control concept that will include engine life usage as part of the control function. The resulting controller will be able to significantly extend the engine's on-wing life with little or no impact on engine performance and operability. The new controller design will utilize damage models to estimate and mitigate the rate and overall accumulation of damage to critical engine parts. The control methods will also provide a means to assess tradeoffs between performance and structural durability on the basis of mission requirements and remaining engine life. Two life-extending control methodologies were studied to reduce the overall life-cycle cost of aircraft engines. The first methodology is to modify the baseline control logic to reduce the thermomechanical fatigue (TMF) damage of cooled stators during acceleration. To accomplish this, an innovative algorithm limits the low-speed rotor acceleration command when the engine has reached a threshold close to the requested thrust. This algorithm allows a significant reduction in TMF damage with only a very small increase in the rise time to reach the commanded rotor speed. The second methodology is to reduce stress rupture/creep damage to turbine blades and uncooled stators by incorporating an engine damage model into the flight mission. Overall operation cost is reduced by an optimization among the flight time, fuel consumption, and component damages. Recent efforts have focused on applying life-extending control technology to an existing commercial turbine engine, and doing so without modifying the hardware or adding sensors. This approach makes it possible to retrofit existing engines with life-extending control technology by changing only the control software in the full-authority digital engine controller (FADEC). The significant results include demonstrating a 20- to 30-percent reduction in TMF damage to the hot section by developing and implementing smart acceleration logic during takeoff. The tradeoff is an increase, from 5.0 to 5.2 sec, in the time required to reach maximum power from ground idle. On a typical flight profile of a cruise at Mach 0.8 at an altitude of 41,000 ft, and cruise time of 104 min, the optimized system showed that a reduction in cruise speed from Mach 0.8 to 0.79 can achieve an estimated 25-to 35-percent creep/rupture damage reduction in the engine's hot section and a fuel savings of 2.1 percent. The tradeoff is an increase in flight time of 1.3 percent (1.4 min).

General planar transverse domain walls realized by optimized transverse magnetic field pulses in magnetic biaxial nanowires

NASA Astrophysics Data System (ADS)

Li, Mei; Wang, Jianbo; Lu, Jie

2017-02-01

The statics and field-driven dynamics of transverse domain walls (TDWs) in magnetic nanowires (NWs) have attracted continuous interests because of their theoretical significance and application potential in future magnetic logic and memory devices. Recent results demonstrate that uniform transverse magnetic fields (TMFs) can greatly enhance the wall velocity, meantime leave a twisting in the TDW azimuthal distribution. For application in high-density NW devices, it is preferable to erase the twisting so as to minimize magnetization frustrations. Here we report the realization of a completely planar TDW with arbitrary tilting attitude in a magnetic biaxial NW under a TMF pulse with fixed strength and well-designed orientation profile. We smooth any twisting in the TDW azimuthal plane thus completely decouple the polar and azimuthal degrees of freedom. The analytical differential equation describing the polar angle distribution is derived and the resulting solution is not the Walker-ansatz form. With this TMF pulse comoving, the field-driven dynamics of the planar TDW is investigated with the help of the asymptotic expansion method. It turns out the comoving TMF pulse increases the wall velocity under the same axial driving field. These results will help to design a series of modern magnetic devices based on planar TDWs.

Characterisation of case depth in induction-hardened medium carbon steels based on magnetic minor hysteresis loop measurement technique

NASA Astrophysics Data System (ADS)

He, Cunfu; Yang, Meng; Liu, Xiucheng; Wang, Xueqian; Wu, Bin

2017-11-01

The magnetic hysteresis behaviours of ferromagnetic materials vary with the heat treatment-induced micro-structural changes. In the study, the minor hysteresis loop measurement technique was used to quantitatively characterise the case depth in two types of medium carbon steels. Firstly, high-frequency induction quenching was applied in rod samples to increase the volume fraction of hard martensite to the soft ferrite/pearlite (or sorbite) in the sample surface. In order to determine the effective and total case depth, a complementary error function was employed to fit the measured hardness-depth profiles of induction-hardened samples. The cluster of minor hysteresis loops together with the tangential magnetic field (TMF) were recorded from all the samples and the comparative study was conducted among three kinds of magnetic parameters, which were sensitive to the variation of case depth. Compared to the parameters extracted from an individual minor loop and the distortion factor of the TMF, the magnitude of three-order harmonic of TMF was more suitable to indicate the variation in case depth. Two new minor-loop coefficients were introduced by combining two magnetic parameters with cumulative statistics of the cluster of minor-loops. The experimental results showed that the two coefficients monotonically linearly varied with the case depth within the carefully selected magnetisation region.

Ground-to-Ground Optical Communications Demonstration

NASA Technical Reports Server (NTRS)

Biswas, A.; Lee, S.

2000-01-01

A bidirectional horizontal-path optical link was demonstrated between Strawberry Peak (SP), Lake Arrowhead, California, and the JPL Table Mountain Facility (TMF), Wrightwood, California, during June and November of 1998. The 0.6-m telescope at TMF was used to broadcast a 4-beam 780-nm beacon to SP. The JPL-patented Optical Communications Demonstrator (OCD) at SP received the beacon, performed ne tracking to compensate for the atmosphere-induced beacon motion and retransmitted a 844-nm communications laser beam modulated at 40 to 500 Mb/s back to TMF. Characteristics of the horizontal-path atmospheric channel as well as performance of the optical communications link were evaluated. The normalized variance of the irradiance fluctuations or scintillation index delta2/I at either end was determined. At TMF where a single 844-nm beam was received by a 0.6-m aperture, the measured delta2/I covered a wide range from 0.07 to 1.08. A single 780-nm beam delta2/I measured at SP using a 0.09-m aperture yielded values ranging from 0.66 to 1.03, while a combination of four beams reduced the scintillation index due to incoherent averaging to 0.22 to 0.40. This reduction reduced the dynamic range of the fluctuations from 17 to 21 dB to 13 to 14 dB as compared with the OCD tracking sensor dynamic range of 10 dB. Predictions of these values also were made based on existing theories and are compared. Generally speaking, the theoretical bounds were reasonable. Discussions on the probability density function (PDF) of the intensity fluctuations are presented and compared with the measurements made. The lognormal PDF was found to agree for the weak scintillation regime as expected. The present measurements support evidence presented by earlier measurements made using the same horizontal path, which suggests that the aperture averaging effect is better than theoretically predicted.

Depositional evolution of the Melville Bay trough-mouth fan, NW Greenland

NASA Astrophysics Data System (ADS)

Knutz, Paul; Gregersen, Ulrik

2015-04-01

The continental margin of NW Greenland bordering northern Baffin Bay is characterized by major sediment accumulations, known as Trough-Mouth Fans (TMF). The fan depocentres represent intense sediment dispersal at the terminus of ice streams that during cold climate periods provided major drainage routes of the northern Greenland Ice Sheet into Baffin Bay. The imprint of paleo-icestreams is seen by erosional troughs crossing a >250 km broad shelf region, which caps a series of sedimentary basins containing thick Mesozoic-Tertiary strata packages. This presentation provides an overview of the seismic stratigraphic division, depositional architecture and examples of seismic facies of the Melville Bay TMF using a 5-10 km grid of industry-quality 2D seismic data (TGS). The focus will primarily be on the inception and early stage of glacial fan development. Comparing the present-day topography with the regional geology shows that the paleo-icestreams exploited the Cenozoic infill of former rift basins that are more conducive to erosion than the adjoining ridges and structural highs. The TMF sequence is constructed by a series of progradational seismic units that represent successive steps in location of ice stream terminus and associated depocenters. The slope fronts of the prograding units show abundant signatures of sediment instability and mass-wasting but evidence of along-slope current-driven processes is also recognized presumably linked to interglacial sea level high-stands. The topset of each unit is characterized by planar erosion that merges landward into hummocky positive geometries with low internal reflectivity. These features are generally interpreted as subglacial landforms, e.g. terminal moraines and ice-contact deposits, associated with grounding zone wedges. Unlike the most recent TMF units deposited in front of the present trough, the oldest glacigenic units have built out from a Neogene sediment prism that forms the core of modern shallow-water banks. These topographic highs probably formed anchoring points facilitating the initial expansion of inland ice onto the shelf. The pre-glacial Neogene package displays typical contourite features concentrated along the mid-shelf region, while further basinward it is marked by intensive erosion and down-slope mass transport in the form of mega-slides. Our results suggests that shelf glaciation in these parts could have been facilitated by tectonic adjustments (e.g. relative fall in sea level) related to phases of tectonic uplift during latest Miocene and Pliocene/early Pleistocene. The present work contributes to a better understanding of the internal complexity of TMF systems as well as the underlying long-term mechanisms that evoked the Late Cenozoic development of the Greenland Ice Sheet.

Water-Vapor Raman Lidar System Reaches Higher Altitude

NASA Technical Reports Server (NTRS)

Leblanc, Thierry; McDermid, I. Stewart

2010-01-01

A Raman lidar system for measuring the vertical distribution of water vapor in the atmosphere is located at the Table Mountain Facility (TMF) in California. Raman lidar systems for obtaining vertical water-vapor profiles in the troposphere have been in use for some time. The TMF system incorporates a number of improvements over prior such systems that enable extension of the altitude range of measurements through the tropopause into the lower stratosphere. One major obstacle to extension of the altitude range is the fact that the mixing ratio of water vapor in the tropopause and the lower stratosphere is so low that Raman lidar measurements in this region are limited by noise. Therefore, the design of the TMF system incorporates several features intended to maximize the signal-to-noise ratio. These features include (1) the use of 355-nm-wavelength laser pulses having an energy (0.9 J per pulse) that is high relative to the laser-pulse energy levels of prior such systems, (2) a telescope having a large aperture (91 cm in diameter) and a narrow field of view (angular width .0.6 mrad), and (3) narrow-bandpass (wavelength bandwidth 0.6 nm) filters for the water-vapor Raman spectral channels. In addition to the large-aperture telescope, three telescopes having apertures 7.5 cm in diameter are used to collect returns from low altitudes.

The Neural Mechanisms of Re-Experiencing Mental Fatigue Sensation: A Magnetoencephalography Study

PubMed Central

Ishii, Akira; Karasuyama, Takuma; Kikuchi, Taiki; Tanaka, Masaaki; Yamano, Emi; Watanabe, Yasuyoshi

2015-01-01

There have been several studies which have tried to clarify the neural mechanisms of fatigue sensation; however fatigue sensation has multiple aspects. We hypothesized that past experience related to fatigue sensation is an important factor which contributes to future formation of fatigue sensation through the transfer to memories that are located within specific brain structures. Therefore, we aimed to investigate the neural mechanisms of fatigue sensation related to memory. In the present study, we investigated the neural activity caused by re-experiencing the fatigue sensation that had been experienced during a fatigue-inducing session. Thirteen healthy volunteers participated in fatigue and non-fatigue experiments in a crossover fashion. In the fatigue experiment, they performed a 2-back test session for 40 min to induce fatigue sensation, a rest session for 15 min to recover from fatigue, and a magnetoencephalography (MEG) session in which they were asked to re-experience the state of their body with fatigue that they had experienced in the 2-back test session. In the non-fatigue experiment, the participants performed a free session for 15 min, a rest session for 15 min, and an MEG session in which they were asked to re-experience the state of their body without fatigue that they had experienced in the free session. Spatial filtering analyses of oscillatory brain activity showed that the delta band power in the left Brodmann’s area (BA) 39, alpha band power in the right pulvinar nucleus and the left BA 40, and beta band power in the left BA 40 were lower when they re-experienced the fatigue sensation than when they re-experienced the fatigue-free sensation, indicating that these brain regions are related to re-experiencing the fatigue sensation. Our findings may help clarify the neural mechanisms underlying fatigue sensation. PMID:25826300

Design Analysis and Thermo-Mechanical Fatigue of a Polyimide Composite for Combustion Chamber Support

NASA Technical Reports Server (NTRS)

Thesken, J. C.; Melis, M.; Shin, E.; Sutter, J.; Burke, Chris

2004-01-01

Polyimide composites are being evaluated for use in lightweight support structures designed to preserve the ideal flow geometry within thin shell combustion chambers of future space launch propulsion systems. Principles of lightweight design and innovative manufacturing techniques have yielded a sandwich structure with an outer face sheet of carbon fiber polyimide matrix composite. While the continuous carbon fiber enables laminated skin of high specific stiffness; the polyimide matrix materials ensure that the rigidity and durability is maintained at operation temperatures of 316 C. Significant weight savings over all metal support structures are expected. The protypical structure is the result of ongoing collaboration, between Boeing and NASA-GRC seeking to introduce polyimide composites to the harsh environmental and loads familiar to space launch propulsion systems. Design trade analyses were carried out using relevant closed form solutions, approximations for sandwich beams/panels and finite element analysis. Analyses confirm the significant thermal stresses exist when combining materials whose coefficients of thermal expansion (CTEs) differ by a factor of about 10 for materials such as a polymer composite and metallic structures. The ramifications on design and manufacturing alternatives are reviewed and discussed. Due to stringent durability and safety requirements, serious consideration is being given to the synergistic effects of temperature and mechanical loads. The candidate structure operates at 316 C, about 80% of the glass transition temperature T(sub g). Earlier thermomechanical fatigue (TMF) investigations of chopped fiber polyimide composites made this near to T(sub g), showed that cyclic temperature and stress promoted excessive creep damage and strain accumulation. Here it is important to verify that such response is limited in continuous fiber laminates.

The concept of a plasma centrifuge with a high frequency rotating magnetic field and axial circulation

NASA Astrophysics Data System (ADS)

Borisevich, V. D.; Potanin, E. P.

2017-07-01

The possibility of using a rotating magnetic field (RMF) in a plasma centrifuge (PC), with axial circulation to multiply the radial separation effect in an axial direction, is considered. For the first time, a traveling magnetic field (TMF) is proposed to drive an axial circulation flow in a PC. The longitudinal separation effect is calculated for a notional model, using specified operational parameters and the properties of a plasma, comprising an isotopic mixture of 20Ne-22Ne and generated by a high frequency discharge. The optimal intensity of a circulation flow, in which the longitudinal separation effect reaches its maximum value, is studied. The optimal parameters of the RMF and TMF for effective separation, as well as the centrifuge performance, are calculated.

The Family Experience of Fatigue in Heart Failure.

PubMed

Whitehead, Lisa

2017-02-01

Fatigue is a symptom experienced almost universally by people living with a chronic illness. People diagnosed with heart failure have described experiencing significant levels of fatigue. The family experience of fatigue, that is, how families perceive, respond to, and manage fatigue, is unknown. Semistructured family group interviews with 22 families ( N = 62 family members) were conducted. Thematic analysis was undertaken to explore the family experience of fatigue. Fatigue was described as a significant symptom that affected physical, emotional, and social functioning at a family level. Fatigue was described as difficult to manage, and while most family members interviewed had developed a shared understanding of fatigue, some family members found acceptance of this invisible symptom more difficult. Spouses were more likely to express concern that fatigue, and especially increased fatigue, represented a decline in health. The study highlighted the importance of a shared understanding of fatigue from a family perspective.

Investigation of the effect of vacuum environment on the fatigue and fracture behavior of 7075-T6.

NASA Technical Reports Server (NTRS)

Hudson, C. M.

1972-01-01

Axial-load fatigue-life, fatigue-crack propagation, and fracture-toughness experiments were conducted on sheet specimens made of 7075-T6 aluminum alloy. These experiments were conducted at air pressures ranging from 101 kN/sq m to 7 micronewtons/sq m to determine the effect of air pressure on fatigue behavior. Analysis of the results from the fatigue-life experiments indicated that for a given stress level, the lower the air pressure was the longer the fatigue life. At a pressure of 7 micronewtons/sq m, fatigue lives were 15 to 30 times longer than at 101 kN/sq m. Analysis of the results from the fatigue-crack-growth experiments indicates that at low values of stress-intensity range, the fatigue-crack-growth rates were approximately twice as high at atmospheric pressure as in vacuum. However, at higher values of stress-intensity range, the fatigue-crack-growth rates were nominally the same in vacuum and at atmospheric pressure.

Fatigue Damage of Collagenous Tissues: Experiment, Modeling and Simulation Studies

PubMed Central

Martin, Caitlin; Sun, Wei

2017-01-01

Mechanical fatigue damage is a critical issue for soft tissues and tissue-derived materials, particularly for musculoskeletal and cardiovascular applications; yet, our understanding of the fatigue damage process is incomplete. Soft tissue fatigue experiments are often difficult and time-consuming to perform, which has hindered progress in this area. However, the recent development of soft-tissue fatigue-damage constitutive models has enabled simulation-based fatigue analyses of tissues under various conditions. Computational simulations facilitate highly controlled and quantitative analyses to study the distinct effects of various loading conditions and design features on tissue durability; thus, they are advantageous over complex fatigue experiments. Although significant work to calibrate the constitutive models from fatigue experiments and to validate predictability remains, further development in these areas will add to our knowledge of soft-tissue fatigue damage and will facilitate the design of durable treatments and devices. In this review, the experimental, modeling, and simulation efforts to study collagenous tissue fatigue damage are summarized and critically assessed. PMID:25955007

The Experience and Self-Management of Fatigue in Hemodialysis Patients

PubMed Central

Horigan, Ann E.; Schneider, Susan M.; Docherty, Sharron; Barroso, Julie

2013-01-01

Fatigue is a common and debilitating symptom for adult patients with end stage renal disease on hemodialysis and has been associated with decreased survival and quality of life. Patients on hemodialysis must find ways to manage their fatigue and mitigate its effects on their lives. Currently, there is no description of the experience of fatigue for patients on hemodialysis living in the U.S., nor is there any description of the ways in which they manage their fatigue. The purpose of this qualitative descriptive work was to describe the experience and self-management of fatigue. Several themes were identified which included: the nature of fatigue, management of fatigue, consequences of fatigue, and factors associated with fatigue. This information will be valuable to nephrology nurses as they continue to care for and educate patients on hemodialysis. PMID:23767335

Mixing Dynamics Induced by Traveling Magnetic Fields

NASA Technical Reports Server (NTRS)

Grugel, Richard N.; Mazuruk, Konstantin

2000-01-01

Microstructural and compositional homogeneity in metals and alloys can only be achieved if the initial melt is homogeneous prior to the onset of solidification processing. Naturally induced convection may initially facilitate this requirement but upon the onset of solidification significant compositional variations generally arise leading to undesired segregation. Application of alternating magnetic fields to promote a uniform bulk liquid concentration during solidification processing has been suggested. To investigate such possibilities an initial study of using traveling magnetic fields (TMF) to promote melt homogenization is reported in this work. Theoretically, the effect of TMF-induced convection on mixing phenomena is studied in the laminar regime of flow. Experimentally, with and without applied fields, both: mixing dynamics by optically monitoring the spreading of an initially localized dye in transparent fluids and, compositional variations in metal alloys have been investigated.

Mixing Dynamics Induced by Traveling Magnetic Fields

NASA Technical Reports Server (NTRS)

Grugel, Richard N.; Mazuruk, Konstantin; Rose, M. Franklin (Technical Monitor)

2001-01-01

Microstructural and compositional homogeneity in metals and alloys can only be achieved if the initial melt is homogeneous prior to the onset of solidification processing. Naturally induced convection may initially facilitate this requirement but upon the onset of solidification significant compositional variations generally arise leading to undesired segregation. Application of alternating magnetic fields to promote a uniform bulk liquid concentration during solidification processing has been suggested. To investigate such possibilities an initial study of using traveling magnetic fields (TMF) to promote melt homogenization is reported in this work. Theoretically, the effect of TMF-induced convection on mixing phenomena is studied in the laminar regime of flow. Experimentally, with and without applied fields, both 1) mixing dynamics by optically monitoring the spreading of an initially localized dye in transparent fluids and, 2) compositional variations in metal alloys have been investigated.

Dual-LP11 mode 4×4 MIMO-OFDM transmission over a two-mode fiber.

PubMed

Al Amin, Abdullah; Li, An; Chen, Simin; Chen, Xi; Gao, Guanjun; Shieh, William

2011-08-15

We report successful transmission of dual-LP(11) mode (LP(11a) and LP(11b)), dual polarization coherent optical orthogonal frequency-division multiplexing (CO-OFDM) signals over two-mode fibers (TMF) using all-fiber mode converters. Mode converters based on mechanically induced long-period grating with better than 20 dB extinction ratios are realized and used for interfacing single-mode fiber transmitter and receivers to the TMF. We demonstrate that by using 4×4 MIMO-OFDM processing, the random coupling of the two LP(11) spatial modes can be successfully tracked and equalized with a one-tap frequency-domain equalizer. We achieve successful transmission of 35.3 Gb/s over 26-km two-mode fiber with less than 3 dB penalty. © 2011 Optical Society of America

Effects of Polymethoxyflavonoids on Bone Loss Induced by Estrogen Deficiency and by LPS-Dependent Inflammation in Mice.

PubMed

Matsumoto, Shigeru; Tominari, Tsukasa; Matsumoto, Chiho; Yoshinouchi, Shosei; Ichimaru, Ryota; Watanabe, Kenta; Hirata, Michiko; Grundler, Florian M W; Miyaura, Chisato; Inada, Masaki

2018-01-20

Polymethoxyflavonoids (PMFs) are a family of the natural compounds that mainly compise nobiletin, tangeretin, heptamethoxyflavone (HMF), and tetramethoxyflavone (TMF) in citrus fruits. PMFs have shown various biological functions, including anti-oxidative effects. We previously showed that nobiletin, tangeretin, and HMF all inhibited interleukin (IL)-1-mediated osteoclast differentiation via the inhibition of prostaglandin E2 synthesis. In this study, we created an original mixture of PMFs (nobiletin, tangeretin, HMF, and TMF) and examined whether or not PMFs exhibit co-operative inhibitory effects on osteoclastogenesis and bone resorption. In a coculture of bone marrow cells and osteoblasts, PMFs dose-dependently inhibited IL-1-induced osteoclast differentiation and bone resorption. The optimum concentration of PMFs was lower than that of nobiletin alone in the suppression of osteoclast differentiation, suggesting that the potency of PMFs was stronger than that of nobiletin in vitro. The oral administration of PMFs recovered the femoral bone loss induced by estrogen deficiency in ovariectomized mice. We further tested the effects of PMFs on lipopolysaccharide-induced bone resorption in mouse alveolar bone. In an ex vivo experimental model for periodontitis, PMFs significantly suppressed the bone-resorbing activity in organ cultures of mouse alveolar bone. These results indicate that a mixture of purified nobiletin, tangeretin, HMF, and TMF exhibits a co-operative inhibitory effect for the protection against bone loss in a mouse model of bone disease, suggesting that PMFs may be potential candidates for the prevention of bone resorption diseases, such as osteoporosis and periodontitis.

A study of fatigue and fracture in 7075-T6 aluminum alloy in vacuum and air environments

NASA Technical Reports Server (NTRS)

Hudson, C. M.

1973-01-01

Axial load fatigue life, fatigue-crack propagation, and fracture toughness experiments were conducted on sheet specimens made of 7075-T6 aluminum alloy. These experiments were conducted at pressures ranging from atmospheric to 5 x 10 to the minus 8th torr. Analysis of the results from the fatigue life experiments indicated that for a given stress level, lower air pressures produced longer fatigue lives. At a pressure of 5 x 10 to the minus 8th torr fatigue lives were 15 or more times as long as at atmospheric pressure. Analysis of the results from the fatigue crack propagation experiments indicated that for small stress intensity factor ranges the fatigue crack propagation rates were up to twice as high at atmospheric pressure as in vacuum. The fracture toughness of 7075-T6 was unaffected by the vacuum environment. Fractographic examination showed that specimens tested in both vacuum and air developed fatigue striations. Considerably more striations developed on specimens tested at atmospheric pressure, however.

Experiences and management of fatigue in everyday life among adult patients living with heart failure: a systematic review of qualitative evidence.

PubMed

Schjoedt, Inge; Sommer, Irene; Bjerrum, Merete Bender

2016-03-01

Fatigue, a common and distressing symptom of heart failure, is a non-specific, invisible and subjective experience, which is difficult to describe and for which there are no effective interventions. Fatigue negatively impacts on patients' everyday life, prognosis and quality of life, therefore it is important that patients can manage, monitor and respond to changes in fatigue. To cope with fatigue patients may need or seek advice on self-management strategies. To synthesize the best available evidence on the experiences and management of fatigue in everyday life among adult patients with stable heart failure. Adults with confirmed and stable heart failure. Studies exploring the experiences and management of fatigue in everyday life among adults with heart failure. Qualitative studies focusing on qualitative data, including, but not limited to, designs within phenomenology, grounded theory or ethnography. A three-step search strategy was used to identify published and unpublished qualitative studies from 1995 to 2014. Studies that met the inclusion criteria were assessed by two independent reviewers for methodological validity using the standardized critical appraisal tools of the Joanna Briggs Institute Qualitative Assessment and Review Instrument (JBI-QARI). Data was extracted from the five included studies using JBI-QARI. Findings were identified and arranged according to the three research questions: patients' experiences of fatigue, impact of fatigue on everyday life and how patients' managed fatigue and its consequences in everyday life. Findings were pooled using JBI-QARI. From the five included studies, 108 findings were derived and subsequently aggregated into 24 categories, which were finally meta-synthesized into five syntheses: "A pervasive and unignorable bodily experience" captured the patients' descriptions of fatigue experiences; "Limited performance of daily living and social activities" and "Loss of self-esteem, identity and intellectual function" aggregated the impact of fatigue on patients' everyday life; "Using protecting and restoring strategies according to the body barometer" and "A dynamic balance between accepting and struggling against fatigue" captured how patients managed fatigue and its consequences. Three different types of bodily fatigue challenge patients with heart failure. Decreased physical capacity, unpredictability and fluctuating intensity are dominant features of fatigue experiences, which cause limitations in performing daily and social activities, increased dependency of others, and loss of self-esteem, identity and intellectual function. Patients' management of fatigue and its consequences is an ongoing process involving use of protective and restorative activities to handle the specific bodily fatigue. However it also relates to living constructively with fatigue by striking a balance between adjusting to and struggling against fatigue. Healthcare providers should be accountable to their patients, recognizing and taking into consideration patients' fatigue experiences and the meaning of fatigue, in order to provide optimal and individual care to their patients. Further qualitative research is needed to consider cultural factors of importance for managing fatigue in everyday life among patients with heart failure. Furthermore research should explore and test different kinds of physical and mind-body activities on the patients' functional capacity and wellbeing.

Driving fatigue in professional drivers: a survey of truck and taxi drivers.

PubMed

Meng, Fanxing; Li, Shuling; Cao, Lingzhi; Li, Musen; Peng, Qijia; Wang, Chunhui; Zhang, Wei

2015-01-01

Fatigue among truck drivers has been studied extensively; however, less is known regarding the fatigue experience of taxi drivers in heavily populated metropolitan areas. This study aimed to compare the differences and similarities between truck and taxi driver fatigue to provide implications for the fatigue management and education of professional drivers. A sample of 274 truck drivers and 286 taxi drivers in Beijing was surveyed via a questionnaire, which included items regarding work characteristics, fatigue experience, accident information, attitude toward fatigue, and methods of counteracting fatigue. Driver fatigue was prevalent among professional drivers, and it was even more serious for taxi drivers. Taxi drivers reported more frequent fatigue experiences and were involved in more accidents. Among the contributing factors to fatigue, prolonged driving time was the most important factor identified by both driver groups. Importantly, the reason for the engagement in prolonged driving was neither due to the lack of awareness concerning the serious outcome of fatigue driving nor because of their poor detection of fatigue. The most probable reason was the optimism bias, as a result of which these professional drivers thought that fatigue was more serious for other drivers than for themselves, and they thought that they were effective in counteracting the effect of fatigue on their driving performance. Moreover, truck drivers tended to employ methods that require stopping to counteract fatigue, whereas taxi drivers preferred methods that were simultaneous with driving. Although both driver groups considered taking a nap as one of the most effective means to address fatigue, this method was not commonly used. Interestingly, these drivers were aware that the methods they frequently used were not the most effective means to counteract fatigue. This study provides knowledge on truck and taxi drivers' characteristics in fatigue experience, fatigue attitude, and fatigue countermeasures, and these findings have practical implications for the fatigue management and education of professional drivers.

Bidirectional Relationships Between Fatigue and Everyday Experiences in Persons Living With HIV.

PubMed

Cook, Paul F; Hartson, Kimberly R; Schmiege, Sarah J; Jankowski, Catherine; Starr, Whitney; Meek, Paula

2016-06-01

Fatigue symptoms are very common among persons living with HIV (PLWH). Fatigue is related to functional and psychological problems and to treatment nonadherence. Using secondary data from ecological momentary assessment, we examined fatigue as a predictor of PLWH everyday experiences. In bidirectional analyses based on the shape shifters model, we also examined these experiences as predictors of fatigue. Data were examined from 67 PLWH who completed daily surveys on a handheld computer. Brief validated scales were used to assess participants' control beliefs, mood, stress, coping, social support, experience of stigma, and motivation. At the beginning and end of the study, fatigue was measured with two CES-D items that have been used in past HIV symptom research. Multilevel models and logistic regression were used to test reciprocal predictive relationships between variables. Moderate to severe fatigue affected 45% of PLWH in the study. Initial fatigue predicted PLWH subsequent overall level of control beliefs, mood, stress, coping, and social support, all p < .05. These state variables remained relatively constant over time, regardless of participants' initial fatigue. In tests for reciprocal relationships with 33 PLWH, average daily stress, OR = 4.74, and stigma, OR = 4.86, also predicted later fatigue. Fatigue predicted several daily survey variables including stress and social support. Stress and support in turn predicted fatigue at a later time, suggesting a self-perpetuating cycle but also a possible avenue for intervention. Future studies should examine daily variation in fatigue among PLWH and its relation to other everyday experiences and behaviors. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Effects of Distress and Eustress on Changes in Fatigue from Waking to Working.

PubMed

Parker, Kelsey N; Ragsdale, Jennifer M

2015-11-01

As a potential indicator of strain, fatigue is an important outcome in occupational health research. The current study examined the influence of positive (eustress) and negative (distress) work experiences on changes in fatigue from morning to at-work. It was expected that within-person changes in fatigue from waking to working would be moderated by employees' experiences of stress, pain, happiness, and meaningfulness at work. Data on 1,195 full-time working adults were collected through the Bureau of Labor Statistics' 2010 American Time Use Study (ATUS) using a day reconstruction method to assess fatigue at two time points (morning and during work) and employees' eustress and distress experiences during work. Multilevel modeling showed that the indicators of distress, stress and pain, predicted higher morning fatigue and stronger increases in fatigue during the workday. The indicators of eustress, happiness and meaningfulness, predicted lower fatigue at both time points but not temporal changes. These results contribute to understanding changes in employees' fatigue and suggest that the differential effects of distress and eustress experiences at work may be important to consider in fatigue management interventions. © 2015 The International Association of Applied Psychology.

Sedimentary response to ice stream advance and retreat on the Storfjorden Trough Mouth Fan (NW Barents Sea), during Late Weichselian

NASA Astrophysics Data System (ADS)

Pedrosa, Mayte; Camerlengui, Angelo; de Mol, Ben; Lucchi, Renata. G.; Úrgeles, Roger; Rebesco, Michele; Winsborrow, Monica; Laberg, Jan. S.; Andreassen, Karin; Accettella, Daniela

2010-05-01

This seafloor morphological study of the Storfjorden Trough Mouth Fan (TMF) (offshore Svalbard, NW Barents Sea) is based on new multibeam bathymetry and chirp sub-bottom profiler data acquired in 2007 during the BIO Hespérides cruise SVAIS that provides an unprecedented image of the sedimentary processes that accompanied the last advance and retreat of the Storfjorden Ice Stream. Compared to other glacial-marine sedimentary systems (such as the adjacent Bjørnøyrenna TMF), the Storfjorden TMF system is small and associated to a relatively small terrestrial ice sheet, approximately 40.000 km2, with local provenance from Svalbard and the Spitsbergen Bank. Due to this short distance from the ice source to the calving areas and the resulting short residence time of ice in the ice sheet, therefore the glacio -marine system of the Storfjorden reacts rapidly to climatic changes. The Storfjorden continental slope is characterized by three depositional lobes, produced by focused sedimentation at the terminus of ice streams that have changed their location with time. The superficial morphology features associated to the two northernmost lobes are straight gullies in the upper slope, and debris lobes starting from the midslope onwards. The seafloor expression of the southernmost lobe, adjacent to the much smaller Kveithola TMF, demonstrate almost no gully incisions and is dominated by the widespread occurrence of small-scale submarine landslides. The subbottom profiles illustrate that sediment failures occurred throughout the Late Neogene evolution of the southern Storfjorden and Kveithola margin, including large-scale mass transport deposits of up to 200 m thick. Seismic facies of the Neogene sequence shows an alternation of glacigenic debris flows and laminated sediment drape inferred to be plumites. Gullies incising glacigenic debris flows at the surface and subsurface and are filled by an interglacial drape sequence. The gullies are formed during each deglaciation phase, most likely by the erosive action of short-lived high density currents originated by sediment-loaded subglacial melt water discharge.At the outer continental shelf of the southernmost lobe a striking fresh linear straight, which has a width of 1, 5 kilometres and cut the morainal deposits. These features are interpreted as mega-scale glacial lineations, which are tentatively attributed to mega-iceberg scours. These lineations are witness the latest advances of the Storfjorden ice streams before the final retreat which was located at the southernmost lobe. One of the main pre-conditioning factors to slope instability on the southern part of the Storfjorden TMF is identified as high sedimentation rate plumites deposited on the middle-upper continental slope by glacial melt water plumes. This study is part of the SVAIS project (funded by the Spanish IPY), that has a main objective to improve the understanding and the relationship between sedimentation and ice sheet dynamics under natural climatic changes.

Genetics Home Reference: COG5-congenital disorder of glycosylation

MedlinePlus

... in my area? Other Names for This Condition carbohydrate deficient glycoprotein syndrome type IIi CDG IIi CDG2I ... the Golgi by the conserved oligomeric Golgi (COG) complex and the golgin TATA element modulatory factor (TMF). ...

Fatigue Properties of the Ultra-High Strength Steel TM210A

PubMed Central

Kang, Xia; Zhao, Gui-ping

2017-01-01

This paper presents the results of an experiment to investigate the high cycle fatigue properties of the ultra-high strength steel TM210A. A constant amplitude rotating bending fatigue experiment was performed at room temperature at stress ratio R = −1. In order to evaluate the notch effect, the fatigue experiment was carried out upon two sets of specimens, smooth and notched, respectively. In the experiment, the rotating bending fatigue life was tested using the group method, and the rotating bending fatigue limit was tested using the staircase method at 1 × 107 cycles. A double weighted least square method was then used to fit the stress-life (S–N) curve. The S–N curves of the two sets of specimens were obtained and the morphologies of the fractures of the two sets of specimens were observed with scanning electron microscopy (SEM). The results showed that the fatigue limit of the smooth specimen for rotating bending fatigue was 615 MPa; the ratio of the fatigue limit to tensile strength was 0.29, and the cracks initiated at the surface of the smooth specimen; while the fatigue limit of the notched specimen for rotating bending fatigue was 363 MPa, and the cracks initiated at the edge of the notch. The fatigue notch sensitivity index of the ultra-high strength maraging steel TM210A was 0.69. PMID:28891934

Addressing reverse osmosis fouling within water reclamation--a side-by-side comparison of low-pressure membrane pretreatments.

PubMed

Kent, Fraser C; Farahbakhsh, Khosrow

2011-06-01

A tertiary membrane filtration (TMF) pilot operating on secondary effluent and a membrane bioreactor (MBR) were setup in a side-by-side study as pretreatments for two identical reverse osmosis pilot systems. The water quality of the permeate from both low-pressure membrane pretreatment systems and the fouling rate of the reverse osmosis systems were compared to assess the capabilities of the two low-pressure membrane pretreatments to prevent organic fouling of the reverse osmosis systems. Both pretreatment pilots were setup using typical operating conditions (i.e., solids retention time and mixed-liquor suspended solids). A consistent difference in water quality and reverse osmosis performance was demonstrated during the 12-month study. The MBR permeate consistently had significantly lower total organic carbon (TOC) and chemical oxygen demand concentrations, but higher color and specific UV absorbance compared with the permeate from the TMF pretreatment. The pretreatment with the MBR gave an average reverse osmosis fouling rate over the entire study (0.27 Lmh/bar.month) that was less than half of the value found for the reverse osmosis with TMF pretreatment (0.60 Lmh/bar.month). A correlation of reverse osmosis feed TOC concentration with average reverse osmosis fouling rate also was established, independent of the pretreatment method used. Results from a cleaning analysis, energy dispersive spectroscopy, and fourier transformed infrared reflectometry confirmed that the foulants were primarily organic in nature. It is concluded that, for this type of application and setup, MBR systems present an advantage over tertiary membrane polishing of secondary effluent for reverse osmosis pretreatment.

Women's experience of SLE-related fatigue: a focus group interview study.

PubMed

Pettersson, Susanne; Möller, Sonia; Svenungsson, Elisabet; Gunnarsson, Iva; Welin Henriksson, Elisabet

2010-10-01

The aim of this study was to describe women's experience of SLE-related fatigue, how they express the feeling of fatigue, impact on life and strategies developed to manage fatigue in daily living. Seven, semi-structured focus group discussions with 33 women were audio-taped, transcribed verbatim and analysed according to qualitative content analysis. Perceptions of SLE-related fatigue were sorted into four themes. Nature of Fatigue, involved the sensation, occurrence and character. Aspects Affected by Fatigue described emotions that arose together with fatigue as well as aspects of work, family life, social contacts and leisure activities that were affected by fatigue. Striving Towards Power and Control concluded the array of ways used to manage daily life and were categorized into the mental struggle, structure, restrict and provide. Factors Influencing the Perception of Fatigue described understanding from their surroundings and pain as strongly influencing the experience and perception of fatigue. SLE-related fatigue was portrayed as an overwhelming phenomenon with an unpredictable character, resulting in the feeling that fatigue dominates and controls most situations in life. The choice of strategies was described as a balance with implications for how fatigue limited a person's life. Health care professionals are advised to take a more active role to empower people with SLE to find their own balance as a way to achieve a feeling of being in control.

Fretting Fatigue of Single Crystal/Polycrystalline Nickel Subjected to Blade/Disk Contact Loading

NASA Astrophysics Data System (ADS)

Matlik, J. F.; Murthy, H.; Farris, T. N.

2002-01-01

Fretting fatigue describes the formation and growth of cracks at the edge-of-contact of nominally clamped components subjected to cyclic loading. Components that are known to be subject to fretting fatigue include riveted lap joints and blade/disk contacts in launch vehicle turbomachinery. Recent efforts have shown that conventional mechanics tools, both fatigue and fracture based, can be used to model fretting fatigue experiments leading to successful life predictions. In particular, experiments involving contact load configurations similar to those that occur in the blade/disk connection of gas turbine engines have been performed extensively. Predictions of fretting fatigue life have been compared favorably to experimental observations [1]. Recent efforts are aimed at performing experiments at higher temperatures as shown in the photograph below along with a sample fracture surface. The talk will describe the status of these experiments as will as model developments relevant to the single crystal material properties.

A phenomenological study of fatigue in patients with primary biliary cirrhosis.

PubMed

Jorgensen, Roberta

2006-09-01

This paper reports the findings of research on the lived experience of fatigue in patients with primary biliary cirrhosis - a type of chronic liver disease. Fatigue is a universal phenomenon, commonly associated with both acute and chronic illness, but also seen in healthy individuals. However, it is not often addressed in healthcare encounters despite its disabling nature, perhaps because of the multitude of contributing factors and the lack of effective treatments. It is a common and debilitating symptom in patients with primary biliary cirrhosis. Despite the prevalence of fatigue in this condition, patients' experiences of this symptom have not been researched. An interpretive-phenomenological approach developed by van Manen was chosen and this combines features of descriptive and interpretive phenomenology. Eight participants were interviewed during 2005 about their fatigue experience. Thematic analysis was conducted. Five themes were identified: an unreliable body, fatigue as always present yet insidious, planning a life to conserve energy, struggling to maintain normality and emotional consequences. These themes reflected the unrelenting, intrusive nature of fatigue into the lives of those affected. This research will provide empathic insight into the fatigue experience in this condition and generate communication about coping strategies. It will add to the body of research on fatigue in chronic conditions and may generate ideas for intervention research.

Defining the Focus of Attention: Effects of Attention on Perceived Exertion and Fatigue

PubMed Central

Lohse, Keith R.; Sherwood, David E.

2011-01-01

This manuscript presents two experiments designed to explore the effects of attention on perceived exertion and time to failure in a fatiguing athletic task. There were two major motivating factors for these experiments. First, there are few studies evaluating attentional focus effects in endurance tasks and, second, there is a lack of integration between studies of attentional focus as external/internal (e.g., Wulf, 2007a) compared to associative/dissociative (e.g., Stevinson and Biddle, 1998). In Experiment 1, we used a fatiguing wall-sit posture (essentially a complex, isometric task) to compare two different types of external attention with an internal focus on the position of the legs. An external focus (regardless of type) increased the time taken to failure and reduced perceived exertion. In Experiment 2, we manipulated subjects’ expectancy of fatigue to test the interaction of attention and expectancy (both top-down factors) in this highly fatiguing task. Previous theories of attention during endurance tasks have suggested that as fatigue/pain increase, bottom-up factors begin to dominate subjects’ attention. While this may be true, Experiment 2 showed that even in a highly fatiguing task, attentional strategies, and expectancies affected the time to failure and perceived exertion. PMID:22102843

Examination of Cognitive Fatigue in Multiple Sclerosis using Functional Magnetic Resonance Imaging and Diffusion Tensor Imaging

PubMed Central

Genova, Helen M.; Rajagopalan, Venkateswaran; DeLuca, John; Das, Abhijit; Binder, Allison; Arjunan, Aparna; Chiaravalloti, Nancy; Wylie, Glenn

2013-01-01

The present study investigated the neural correlates of cognitive fatigue in Multiple Sclerosis (MS), looking specifically at the relationship between self-reported fatigue and objective measures of cognitive fatigue. In Experiment 1, functional magnetic resonance imaging (fMRI) was used to examine where in the brain BOLD activity covaried with “state” fatigue, assessed during performance of a task designed to induce cognitive fatigue while in the scanner. In Experiment 2, diffusion tensor imaging (DTI) was used to examine where in the brain white matter damage correlated with increased “trait” fatigue in individuals with MS, assessed by the Fatigue Severity Scale (FSS) completed outside the scanning session. During the cognitively fatiguing task, the MS group had increased brain activity associated with fatigue in the caudate as compared with HCs. DTI findings revealed that reduced fractional anisotropy in the anterior internal capsule was associated with increased self-reported fatigue on the FSS. Results are discussed in terms of identifying a “fatigue-network” in MS. PMID:24223850

Examination of cognitive fatigue in multiple sclerosis using functional magnetic resonance imaging and diffusion tensor imaging.

PubMed

Genova, Helen M; Rajagopalan, Venkateswaran; Deluca, John; Das, Abhijit; Binder, Allison; Arjunan, Aparna; Chiaravalloti, Nancy; Wylie, Glenn

2013-01-01

The present study investigated the neural correlates of cognitive fatigue in Multiple Sclerosis (MS), looking specifically at the relationship between self-reported fatigue and objective measures of cognitive fatigue. In Experiment 1, functional magnetic resonance imaging (fMRI) was used to examine where in the brain BOLD activity covaried with "state" fatigue, assessed during performance of a task designed to induce cognitive fatigue while in the scanner. In Experiment 2, diffusion tensor imaging (DTI) was used to examine where in the brain white matter damage correlated with increased "trait" fatigue in individuals with MS, assessed by the Fatigue Severity Scale (FSS) completed outside the scanning session. During the cognitively fatiguing task, the MS group had increased brain activity associated with fatigue in the caudate as compared with HCs. DTI findings revealed that reduced fractional anisotropy in the anterior internal capsule was associated with increased self-reported fatigue on the FSS. Results are discussed in terms of identifying a "fatigue-network" in MS.

3D-seismic observations of Late Pleistocene glacial dynamics on the central West Greenland margin

NASA Astrophysics Data System (ADS)

Hofmann, Julia; Knutz, Paul; Cofaigh, Colm Ó.

2016-04-01

Fast-flowing ice streams and outlet glaciers exert a major control on glacial discharge from contemporary and palaeo ice sheets. Improving our understanding of the extent and dynamic behaviour of these palaeo-ice streams is therefore crucial for predictions of the response of ice sheets to present and future climate warming and the associated implications for global sea level. This poster presents results from two 3D-seismic surveys located on the shelf adjoining the Disko Bay trough-mouth fan (TMF), one of the largest glacial outlet systems in Greenland. Located at the seaward terminus of the c. 370 km long cross-shelf Disko Trough, the Disko Bay TMF was generated by highly efficient subglacial sediment delivery onto the continental slopes during repeated ice-stream advances. A variety of submarine glacial landform assemblages are recognised on the seabed reflecting past ice-stream activity presumably related to glacial-interglacial cycles. The 3D-seismic volumes cover the shallow banks located north and south of the Disko Trough. The focus of this study is the seabed and the uppermost stratigraphic interval associated with the Late Stage of TMF development, presumably covering the late Pleistocene (Hofmann et al., submitted). Seabed morphologies include multiple sets of ridges up to 20 m high that extend in NW-SE direction for c. 30 km, and cross-cutting curvilinear furrows with maximum lengths of c. 9 km and average depths of c. 4.5 m. Back-stepping, arcuate scarps facing NW define the shelf break on the northern survey, comprising average widths of c. 4.5 km and incision depths of c. 27.5 m. The large transverse ridge features on the southern survey are likely ice-marginal and are interpreted as terminal moraine ridges recording the existence of a shelf-edge terminating, grounded Late Weichselian ice sheet. The furrows, most prominent on the outer shelf adjoining the shallow banks and partly incising the moraine ridges, are interpreted as iceberg ploughmarks suggesting the transition between grounded ice and a glacimarine setting. The back-stepping scarps are suggestive of slide scars that were created as a result of mass movement induced by instabilities along the NW slope. The buried section contains morphologies indicating an asymmetric feature with a steeper side facing south. It comprises a thickness of c. 100 m and a length of c. 28 km. The detailed surface observations and seismic geometries suggest that the northern area represents a relict grounding-zone wedge (GZW). The wedge is covered by stratified deposits suggesting that it was at least occasionally submarine after its formation and may have served as pinning-point for floating ice shelves during periods of the Late TMF Stage. Important implications of the study are the intermittent development of floating ice shelves during the course of the Late Stage of TMF development and the presence of shelf-edge terminating grounded Late Weichselian ice outside of the troughs. Hofmann, J.C., Knutz, P.C., Nielsen, T., Kuijpers, A., submitted. Seismic architecture and evolution of the Disko Bay trough-mouth fan, central West Greenland margin. Quaternary Science Reviews.

Symptoms of fatigue and coping strategies in maritime pilotage.

PubMed

Chambers, Timothy P; Main, Luana C

2015-01-01

Little is known regarding the symptoms of fatigue that maritime pilots experience during shift work. Moreover, the strategies these individuals use to cope with the onset of fatigue are also unknown. The current study explored the symptoms of fatigue and coping strategies experienced by maritime pilots when on-shift. Fifty maritime pilots were recruited via an advertisement in the national association's quarterly newsletter (Mage = 51.42; SD = 9.81). Participants responded to a modified version of the questionnaire used with aviation pilots that assessed overall fatigue, and the symptoms pilots associated with fatigue on duty. Methods pilots used to cope with fatigue before shift and when on the bridge were also assessed. There were significant effects for pilot vitality on 4 categories of fatigue: cognitive dysfunction; emotional disturbance; mean physical effects; and sleepiness. There were no significant effects for vitality on any of the self-reported coping strategy factors. The findings indicated that maritime pilots experience a variety of physical, behavioural, and cognitive fatigue symptoms when on shift. Some of these symptoms are similar to those reported by aviation pilots. However, unlike aviation pilots, maritime pilots reported utilising self-sufficient coping strategies to deal with the experience of fatigue.

[Evaluating fatigue resistance effect of health food by near-infrared tissue oximeter].

PubMed

Wu, Jian; Ding, Hai-shu; Ye, Da-tian

2009-09-01

Currently, chronic fatigue syndrome (CFS) seriously affects people's normal living and work. In the present paper, the physiological parameters, such as tissue oxygenation saturation and heart rate, were used to evaluate the subjects' fatigue degree, and the fatigue resistance capsule and coffee were taken as a measure to adjust the fatigue. Human tissue oxygen saturation (rSO2) can be monitored noninvasively and in real time by near infrared spectroscopy (NIRS) based on spatially-resolved spectroscopy. Aiming at those brainworkers who need to work in an office for a long time; two static experiments were designed to evaluate the fatigue degree of the subjects who either take the fatigue resistance capsules/coffee or not. The rSO2 and heart rate (HR) of the subjects in the experiment group and contrast group were measured respectively for fatigue evaluation. This work particularly analyzed the changes in rSO2 in these two groups. The results show that the rSO2 of subjects in the experiment group evidently increased compared to that in the contrast group when the subjects took the fatigue resistance capsule or coffee, thereby show that the health food can reduce the fatigue to a certain extent.

Fatigue Experiences Among OCD Outpatients.

PubMed

Pasquini, Massimo; Piacentino, Daria; Berardelli, Isabella; Roselli, Valentina; Maraone, Annalisa; Tarsitani, Lorenzo; Biondi, Massimo

2015-12-01

Patients with OCD are impaired in multiple domains of functioning and quality of life. While associated psychopathology complaints and neuropsychological deficits were reported, the subjective experience of general fatigue and mental fatigue was scarcely investigated. In this single-center case-control study we compared 50 non-depressed OCD outpatients consecutively recruited and 50 panic disorder (PD) outpatients, to determine whether they experienced fatigue differently. Assessment consisted of structured clinical interview for DSM-IV criteria by using the SCID-I and the SCID-II. Symptom severity was assessed using the Yale-Brown Obsessive-Compulsive Scale, the Hamilton Anxiety Rating Scale, the Hamilton Depression Rating Scale, the Clinical Global Impressions Scale, severity and the Global Assessment of Functioning Scale. Fatigue was assessed by using the Multidimensional Fatigue Inventory (MFI). Regarding MFI physical fatigue, an OR of 0.196 (95 % CI 0.080-0.478) was found, suggesting that its presence is associated with lower odds of OCD compared to PD. The same can be said for MFI mental fatigue, as an OR of 0.138 (95 % CI 0.049-0.326) was found, suggesting that its presence is associated with lower odds of OCD. Notably, OCD patients with OCDP co-morbidity reported higher scores of mental fatigue. In this study fatigue, including mental fatigue, seems not to be a prominent experience among adult non-depressed OCD patients.

Sustained Attention is Associated with Error Processing Impairment: Evidence from Mental Fatigue Study in Four-Choice Reaction Time Task

PubMed Central

Xiao, Yi; Ma, Feng; Lv, Yixuan; Cai, Gui; Teng, Peng; Xu, FengGang; Chen, Shanguang

2015-01-01

Attention is important in error processing. Few studies have examined the link between sustained attention and error processing. In this study, we examined how error-related negativity (ERN) of a four-choice reaction time task was reduced in the mental fatigue condition and investigated the role of sustained attention in error processing. Forty-one recruited participants were divided into two groups. In the fatigue experiment group, 20 subjects performed a fatigue experiment and an additional continuous psychomotor vigilance test (PVT) for 1 h. In the normal experiment group, 21 subjects only performed the normal experimental procedures without the PVT test. Fatigue and sustained attention states were assessed with a questionnaire. Event-related potential results showed that ERN (p < 0.005) and peak (p < 0.05) mean amplitudes decreased in the fatigue experiment. ERN amplitudes were significantly associated with the attention and fatigue states in electrodes Fz, FC1, Cz, and FC2. These findings indicated that sustained attention was related to error processing and that decreased attention is likely the cause of error processing impairment. PMID:25756780

Mountain-Top-to-Mountain-Top Optical Link Demonstration. Part 1

NASA Technical Reports Server (NTRS)

Biswas, A.; Wright, M. W.

2002-01-01

A mountain-top-to-mountain-top optical link was demonstrated between JPL's Table Mountain Facility (TMF), Wrightwood, California, and Strawberry Peak (SP), Lake Arrowhead, California, during the months of June, August, and September of 2000. The bidirectional laser link was nearly horizontal at an altitude of 2 km and spanned a range of 46.8 km. The 780-nm beacon laser transmitted from TMF comprised eight co-propagating mutually incoherent laser beams. The normalized variance or scintillation index (SI) of the individual beacon lasers measured by recording the signal received through 8.50-cm-diameter spotting telescopes on three different nights (June 28-30, 2000) was 1.05 +/- 0.2, 1.76 +/- 0.6, and 0.96 +/- 0.24, respectively. These measurements agreed with values predicted by a heuristic model. The SI of the signal received at SP was found to decrease progressively with an increasing number of beams, and a factor of 3 to 3.5 reduction was achieved for all eight beams. The beam divergence determined by mapping out the point spread function of a few of the individual laser footprints received at SP was 85 to 150 microrad, compared to a design goal of 120 microrad. The 852-nm communications laser beam received at TMF through a 60-cm-diameter telescope on the nights of August 4 and September 14 and 15, 2000, yielded SI values of 0.23 +/- 0.04, 0.32 +/- 0.01, and 0.49 +/- 0.18, respectively, where the reduction was attributed to aperture averaging. The probability distribution functions of the received signal at either end, mitigated by multi-beam averaging in one direction and by aperture averaging in the other direction, displayed lognormal behavior. Consequently, the measured fade statistics showed good agreement with a lognormal model.

Metabolism of Kaempferia parviflora polymethoxyflavones by human intestinal bacterium Bautia sp. MRG-PMF1.

PubMed

Kim, Mihyang; Kim, Nayoung; Han, Jaehong

2014-12-24

Poylmethoxyflavones (PMFs) are major bioactive flavonoids, which exhibit various biological activities, such as anticancer effects. The biotransformation of PMFs and characterization of a PMF-metabolizing human intestinal bacterium were studied herein for the first time. Hydrolysis of aryl methyl ether functional groups by human fecal samples was observed from the bioconversion of various PMFs. Activity-guided screening for PMF-metabolizing intestinal bacteria under anaerobic conditions resulted in the isolation of a strict anaerobic bacterium, which was identified as Blautia sp. MRG-PMF1. The isolated MRG-PMF1 was able to metabolize various PMFs to the corresponding demethylated flavones. The microbial conversion of bioactive 5,7-dimethoxyflavone (5,7-DMF) and 5,7,4'-trimethoxyflavone (5,7,4'-TMF) was studied in detail. 5,7-DMF and 5,7,4'-TMF were completely metabolized to 5,7-dihydroxyflavone (chrysin) and 5,7,4'-trihydroxyflavone (apigenin), respectively. From a kinetics study, the methoxy group on the flavone C-7 position was found to be preferentially hydrolyzed. 5-Methoxychrysin, the intermediate of 5,7-DMF metabolism by Blautia sp. MRG-PMF1, was isolated and characterized by nuclear magnetic resonance spectroscopy. Apigenin was produced from the sequential demethylation of 5,7,4'-TMF, via 5,4'-dimethoxy-7-hydroxyflavone and 7,4'-dihydroxy-5-methoxyflavone (thevetiaflavone). Not only demethylation activity but also deglycosylation activity was exhibited by Blautia sp. MRG-PMF1, and various flavonoids, including isoflavones, flavones, and flavanones, were found to be metabolized to the corresponding aglycones. The unprecedented PMF demethylation activity of Blautia sp. MRG-PMF1 will expand our understanding of flavonoid metabolism in the human intestine and lead to novel bioactive compounds.

The role of cognitive, emotional and personality factors in the experience of fatigue in a university and community sample.

PubMed

Kangas, Maria; Montgomery, Guy H

2011-05-01

The aim of this study was to investigate the contribution of cognitive, emotional and personality factors to the experience of fatigue severity in healthy adult individuals. Specifically, the study examined whether fatigue catastrophising and emotional distress mediated the relationships between neuroticism, general irrational and rational thoughts to fatigue severity. One hundred and eighty nine university students and community volunteers completed self-report questionnaires assessing fatigue catastrophising and symptom severity, neuroticism, general rational and irrational thoughts and emotional distress. A series of correlational and path analyses were conducted to test the study hypotheses. Neuroticism and more general negative, irrational cognitions were associated with elevated fatigue catastrophising and fatigue severity, whereas more adaptive, rational cognitions were related to lower fatigue catastrophising and fatigue severity. Both elevated fatigue catastrophising and emotional distress uniquely and simultaneously mediated the relationships between irrational and rational cognitions and neuroticism to fatigue severity. These findings demonstrate that cognitions play a role in fatigue severity. The results have implications in the assessment and treatment of fatigue disturbances in the general community.

Exploring nurse leader fatigue: a mixed methods study.

PubMed

Steege, Linsey M; Pinekenstein, Barbara J; Arsenault Knudsen, Élise; Rainbow, Jessica G

2017-05-01

To describe hospital nurse leaders' experiences of fatigue. Fatigue is a critical challenge in nursing. Existing literature focuses on staff nurse fatigue, yet nurse leaders are exposed to high demands that may contribute to fatigue and associated risks to patient, nurse and organisational outcomes. A mixed method approach comprising semi-structured interviews and the Occupational Fatigue Exhaustion Recovery scale with 21 nurse administrators (10 nurse managers and 11 nurse executives) from hospitals in a Midwestern state. Most nurse leaders experience fatigue; nurse managers reported higher levels of chronic fatigue. Participants identified multiple sources of fatigue including 24 h accountability and intensity of role expectations, and used a combination of wellness, restorative, social support and boundary setting strategies to cope with fatigue. The consequences of nurse leader fatigue include an impact on decision-making, work-life balance and turnover intent. The high prevalence of nurse leader fatigue could impact the turnover intent of nurse administrators and quality of care. This study highlights the significance and consequences of nurse leader fatigue. As health care organisations continue to raise awareness and establish systems to reduce nurse fatigue, policies and programmes must be adapted to address nurse leader fatigue. © 2017 John Wiley & Sons Ltd.

Fatigue-Induced Damage in Zr-Based Bulk Metallic Glasses

PubMed Central

Chuang, Chih-Pin; Yuan, Tao; Dmowski, Wojciech; Wang, Gong-Yao; Freels, Matt; Liaw, Peter K.; Li, Ran; Zhang, Tao

2013-01-01

In the present work, we investigate the effect of “fatigue” on the fatigue behavior and atomic structure of Zr-based BMGs. Fatigue experiments on the failed-by-fatigue samples indicate that the remnants generally have similar or longer fatigue life than the as-cast samples. Meanwhile, the pair-distribution-function (PDF) analysis of the as-cast and post-fatigue samples showed very small changes of local atomic structures. These observations suggest that the fatigue life of the 6-mm in-diameter Zr-based BMG is dominated by the number of pre-existing crack-initiation sites in the sample. Once the crack initiates in the specimen, the fatigue-induced damage is accumulated locally on these initiated sites, while the rest of the region deforms elastically. The results suggest that the fatigue failure of BMGs under compression-compression fatigue experiments is a defect-controlled process. The present work indicates the significance of the improved fatigue resistance with decreasing the sample size. PMID:23999496

Development of a 1-m Class Telescope at TMF to Support Optical Communications Demonstrations

NASA Technical Reports Server (NTRS)

Wilson, K. E.; Sandusky, J.

1998-01-01

With the impetus towards high data rate communications in inter-satellite and space-to-ground links, the small size, low-mass, and low-power consumption of optical communications is seen as a viable alternative to radio frequency links.

Influence of the North American monsoon on Southern California tropospheric ozone levels during summer in 2013 and 2014

NASA Astrophysics Data System (ADS)

Granados-Muñoz, Maria Jose; Johnson, Matthew S.; Leblanc, Thierry

2017-06-01

The impact of the North American (NA) monsoon on tropospheric ozone variability in Southern California is investigated using lidar measurements at Jet Propulsion Laboratory-Table Mountain Facility, California, and the chemical-transport model GEOS-Chem. Routine lidar observations obtained in July-August 2013-2014 reveal a consistent ozone enhancement of 23 ppbv in the free troposphere (6-9 km), when ozone-rich air is transported along the western edge of the upper level anticyclone associated with the NA monsoon from regions where maximum lightning-induced NOx production occurs. When the high-pressure system shifts to the southeast, a zonal westerly flow of the air parcels reaching the Table Mountain Facility (TMF) occurs, prohibiting the lightning-induced ozone enhanced air to reach TMF. This modulation of tropospheric ozone by the position of the NA monsoon anticyclone could have implications on long-term ozone trends associated with our changing climate, due to the expected widening of the tropical belt affecting the strength and position of the anticyclone.

Continuously varying of critical exponents with the bismuth doped in the La0.8Na0.2Mn1-xBixO3 (0 ≤ x ≤ 0.06) manganites

NASA Astrophysics Data System (ADS)

Laouyenne, M. R.; Baazaoui, M.; Mahjoub, Sa.; Cheikhrouhou-Koubaa, W.; Farah, Kh.; Oumezzine, M.

2018-04-01

A comprehensive analysis of the critical phenomena for the nominal compositions La0.8Na0.2Mn1-xBixO3 (0 ≤ x ≤ 0.06) was carried out. The critical exponents values were calculated by various techniques such as Modified Arrott plot (MAP), Kouvel Fisher (KF) method and critical isotherm (CI). Comparison of the experimental data with the above theoretical models showed that the critical exponents β, γ and δ for the undoped sample are quite well described by the tricritical mean-field model (TMF). Furthermore, the substitution of Mn by Bi ions led to the increase of γ which approached the 3D-Heisenberg model (γ = 1 325 and β took similar values to those predicted by the TMF model. The validity of the exponents values was confirmed with the scaling hypothesis; the M (T, ε) curves collapse onto two independent universal branches below and above Tc.

Methods of Collection of Biological Information for Fatigue Evaluation during Visual Display Terminals (VDT) Operation

NASA Astrophysics Data System (ADS)

Hachiya, Yuriko; Ogai, Harutoshi; Okazaki, Hiroko; Fujisaki, Takeshi; Uchida, Kazuhiko; Oda, Susumu; Wada, Futoshi; Mori, Koji

A method for the analysis of fatigue parameters has been rarely researched in VDT operation. Up to now, fatigue was evaluated by changing of biological information. If signals regarding fatigue are detected, fatigue can be measured. The purpose of this study proposed experiment and analysis method to extract parameters related to fatigue from the biological information during VDT operation using the Independent Component Analysis (ICA). An experiment had 11 subjects. As for the experiment were light loaded VDT operation and heavy loaded VDT operation. A measurement item were amount of work, a mistake number, subjective symptom, surface skin temperature (forehead and apex nasi), heart rate, skin blood flow of forearm and respiratory rate. In the heavy loaded operation group, mistake number and subjective symptom score were increased to compare with the other. And Two-factor ANOVA was used for analysis. The result of mistake number was confirmed that heavy loaded. After the moving averages of waveshape were calculated, it was made to extract independent components by using the ICA. The results of the ICA suggest that the independent components increase according to accumulation of fatigue. Thus, the independent components would be a possible parameter of fatigue. However, further experiments should continue in order to obtain the conclusive finding of our research.

The role of psychological factors in fatigue among end-stage kidney disease patients: a critical review

PubMed Central

Moss-Morris, Rona; Macdougall, Iain C.; Chilcot, Joseph

2017-01-01

Fatigue is a common and debilitating symptom, affecting 42–89% of end-stage kidney disease patients, persisting even in pre–dialysis care and stable kidney transplantation, with huge repercussions on functioning, quality of life and patient outcomes. This paper presents a critical review of current evidence for the role of psychological factors in renal fatigue. To date, research has concentrated primarily on the contribution of depression, anxiety and subjective sleep quality to the experience of fatigue. These factors display consistent and strong associations with fatigue, above and beyond the role of demographic and clinical factors. Considerably less research is available on other psychological factors, such as social support, stress, self-efficacy, illness and fatigue-specific beliefs and behaviours, and among transplant recipients and patients in pre-dialysis care. Promising evidence is available on the contribution of illness beliefs and behaviours to the experience of fatigue and there is some indication that these factors may vary according to treatment modality, reflecting the differential burdens and coping necessities associated with each treatment modality. However, the use of generic fatigue scales casts doubt on what specifically is being measured among dialysis patients, illness-related fatigue or post-dialysis-specific fatigue. Therefore, it is important to corroborate the available evidence and further explore, qualitatively and quantitatively, the differences in fatigues and fatigue-specific beliefs and behaviours according to renal replacement therapy, to ensure that any model and subsequent intervention is relevant and grounded in the experiences of patients. PMID:28638608

Fatigue sensation induced by the sounds associated with mental fatigue and its related neural activities: revealed by magnetoencephalography.

PubMed

Ishii, Akira; Tanaka, Masaaki; Iwamae, Masayoshi; Kim, Chongsoo; Yamano, Emi; Watanabe, Yasuyoshi

2013-06-13

It has been proposed that an inappropriately conditioned fatigue sensation could be one cause of chronic fatigue. Although classical conditioning of the fatigue sensation has been reported in rats, there have been no reports in humans. Our aim was to examine whether classical conditioning of the mental fatigue sensation can take place in humans and to clarify the neural mechanisms of fatigue sensation using magnetoencephalography (MEG). Ten and 9 healthy volunteers participated in a conditioning and a control experiment, respectively. In the conditioning experiment, we used metronome sounds as conditioned stimuli and two-back task trials as unconditioned stimuli to cause fatigue sensation. Participants underwent MEG measurement while listening to the metronome sounds for 6 min. Thereafter, fatigue-inducing mental task trials (two-back task trials), which are demanding working-memory task trials, were performed for 60 min; metronome sounds were started 30 min after the start of the task trials (conditioning session). The next day, neural activities while listening to the metronome for 6 min were measured. Levels of fatigue sensation were also assessed using a visual analogue scale. In the control experiment, participants listened to the metronome on the first and second days, but they did not perform conditioning session. MEG was not recorded in the control experiment. The level of fatigue sensation caused by listening to the metronome on the second day was significantly higher relative to that on the first day only when participants performed the conditioning session on the first day. Equivalent current dipoles (ECDs) in the insular cortex, with mean latencies of approximately 190 ms, were observed in six of eight participants after the conditioning session, although ECDs were not identified in any participant before the conditioning session. We demonstrated that the metronome sounds can cause mental fatigue sensation as a result of repeated pairings of the sounds with mental fatigue and that the insular cortex is involved in the neural substrates of this phenomenon.

Compassion fatigue and burnout: what managers should know.

PubMed

Slatten, Lise Anne; David Carson, Kerry; Carson, Paula Phillips

2011-01-01

Most health care employees experience and are bolstered by compassion satisfaction as they deal with patients in need. However, the more empathetic a health care provider is, the more likely he or she will experience compassion fatigue. Compassion fatigue is a negative syndrome that occurs when dealing with the traumatic experiences of patients, and examples of symptoms include intrusive thoughts, sleeping problems, and depression. Compassion fatigue is different from burnout. Compassion fatigue is a rapidly occurring disorder for primary health care workers who work with suffering patients, whereas burnout, a larger construct, is a slowly progressing disorder for employees who typically are working in burdensome organizational environments. Managers can mitigate problems associated with compassion fatigue with a number of interventions including patient reassignments, formal mentoring programs, employee training, and a compassionate organizational culture. With burnout, health care managers will want to focus primarily on chronic organizational problems.

A data acquisition and control program for axial-torsional fatigue testing

NASA Technical Reports Server (NTRS)

Kalluri, Sreeramesh; Bonacuse, Peter J.

1989-01-01

A computer program was developed for data acquisition and control of axial-torsional fatigue experiments. The multitasked, interrupt-driven program was written in Pascal and Assembly. This program is capable of dual-channel control and six-channel data acquisition. It can be utilized to perform inphase and out-of-phase axial-torsional isothermal fatigue or deformation experiments. The program was successfully used to conduct inphase axial-torsional fatigue experiments on 304 stainless steel at room temperature and on Hastelloy X at 800 C. The details of the software and some of the results generated to date are presented.

Compassion fatigue in pediatric palliative care providers.

PubMed

Rourke, Mary T

2007-10-01

The experience of compassion fatigue is an expected and common response to the professional task of routinely caring for children at the end of life. Symptoms of compassion fatigue often mimic trauma reactions. Implementing strategies that span personal, professional, and organizational domains can help protect health care providers from the damaging effects of compassion fatigue. Providing pediatric palliative care within a constructive and supportive team can help caregivers deal with the relational challenges of compassion fatigue. Finally, any consideration of the toll of providing pediatric palliative care must be balanced with a consideration of the parallel experience of compassion satisfaction.

Equity-Directed Instructional Practices: Beyond the Dominant Perspective

ERIC Educational Resources Information Center

Rubel, Laurie H.

2017-01-01

In this article, the author synthesizes four equity-directed instructional practices: standards-based mathematics instruction, complex instruction, culturally relevant pedagogy (CRP), and teaching mathematics for social justice (TMfSJ). The author organizes these practices according to the dominant and critical axes in Gutiérrez's (2007a) equity…

Exploring the Use of Multimedia Fate and Bioaccumulation Models to Calculate Trophic Magnification Factors (TMFs)

EPA Science Inventory

The trophic magnification factor (TMF) is considered to be a key metric for assessing the bioaccumulation potential of organic chemicals in food webs. Fugacity is an equilibrium criterion and thus reflects the relative thermodynamic status of a chemical in the environment and in ...

Examining Self-Protection Measures Guarding Adult Protective Services Social Workers against Compassion Fatigue

ERIC Educational Resources Information Center

Bourassa, Dara

2012-01-01

Little research has focused on the risk factors, effects, and experiences of compassion fatigue among gerontological social workers. This qualitative study explores the experiences and perspectives of nine Adult Protective Services (APS) social workers in relation to compassion fatigue. Results show that the APS social workers combined personal…

Axial and Torsional Load-Type Sequencing in Cumulative Fatigue: Low Amplitude Followed by High Amplitude Loading

NASA Technical Reports Server (NTRS)

Bonacuse, Peter J.; Kalluri, Sreeramesh

2001-01-01

The experiments described herein were performed to determine whether damage imposed by axial loading interacts with damage imposed by torsional loading. This paper is a follow on to a study that investigated effects of load-type sequencing on the cumulative fatigue behavior of a cobalt base superalloy, Haynes 188 at 538 C Both the current and the previous study were used to test the applicability of cumulative fatigue damage models to conditions where damage is imposed by different loading modes. In the previous study, axial and torsional two load level cumulative fatigue experiments were conducted, in varied combinations, with the low-cycle fatigue (high amplitude loading) applied first. In present study, the high-cycle fatigue (low amplitude loading) is applied initially. As in the previous study, four sequences (axial/axial, torsion/torsion, axial/torsion, and torsion/axial) of two load level cumulative fatigue experiments were performed. The amount of fatigue damage contributed by each of the imposed loads was estimated by both the Palmgren-Miner linear damage rule (LDR) and the non-linear damage curve approach (DCA). Life predictions for the various cumulative loading combinations are compared with experimental results.

Relationship between subjective fatigue, physical activity, and sleep indices in nurses working 16-hour night shifts in a rotating two-shift system

PubMed Central

Kagamiyama, Hiromi; Yano, Rika

2018-01-01

Objective: We clarified the relationship between the degree of subjective fatigue, sleep, and physical activity among nurses working 16-hour night shifts in a rotating two-shift system. Materials and Methods: We investigated 15 nurses who were surveyed regarding their individual attributes, physical activity level (consumed calories), hours of sleep, sleep efficiency, sleep onset latency, sleep diary, and subjective symptoms. Nurses wore a Fitbit One (Fitbit Inc., San Francisco, CA, USA) for 7 consecutive days to measure sleep and physical activity. Results: Results were analyzed for nine participants, excluding those who withdrew or had missing data. The years of nursing experience, nurses’ age, and the length of nocturnal awakening time of the high fatigue group were significantly longer than of the low fatigue group (p < .05). Years of nursing experience in the affiliated department of the high fatigue group was significantly shorter than of low fatigue group (p < .05). The number of nightshifts during the survey period was significantly higher in the high fatigue group than in the low fatigue group. Fatigue after work and body mass index (r = 0.46, p < .001), consumed calories (r = 0.30, p < .05), bedtime (r = –0.36, p < .05), and hours of sleep (r = –0.37, p < .01) were significantly correlated; however, the sleep indices were not correlated. Conclusion: We clarified that the degree of fatigue in nurses working 16-hour night shifts in a rotating two-shift system was related to individual factors, such as age, years of nursing experience, years of nursing experience in the affiliated department, number of nightshifts, and length of nocturnal awakening time. Nurses with greater fatigue had significant differences in their bedtime on days off and work days, which suggests that sleep rhythm may also affect fatigue.

Accelerated Aging Experiments for Prognostics of Damage Growth in Composite Materials

DTIC Science & Technology

2011-09-01

possible resource to collect such data is an accelerated aging platform. To that end this paper describes a fatigue cycling experiment with the goal to...possible resource to collect such data is an accelerated aging platform. To that end this paper describes a fatigue cycling experiment with the goal to...suffer from two damage types: matrix micro-cracks and inter- laminar delamination. When subject to fatigue loading matrix micro-cracks develop in the

The Experience of Persons With Multiple Sclerosis Using MS INFoRm: An Interactive Fatigue Management Resource.

PubMed

Pétrin, Julie; Akbar, Nadine; Turpin, Karen; Smyth, Penelope; Finlayson, Marcia

2018-04-01

We aimed to understand participants' experiences with a self-guided fatigue management resource, Multiple Sclerosis: An Interactive Fatigue Management Resource ( MS INFoRm), and the extent to which they found its contents relevant and useful to their daily lives. We recruited 35 persons with MS experiencing mild to moderate fatigue, provided them with MS INFoRm, and then conducted semistructured interviews 3 weeks and 3 months after they received the resource. Interpretive description guided the analysis process. Findings indicate that participants' experience of using MS INFoRm could be understood as a process of change, influenced by their initial reactions to the resource. They reported experiencing a shift in knowledge, expectations, and behaviors with respect to fatigue self-management. These shifts led to multiple positive outcomes, including increased levels of self-confidence and improved quality of life. These findings suggest that MS INFoRm may have a place in the continuum of fatigue management interventions for people with MS.

Fatigue sensation induced by the sounds associated with mental fatigue and its related neural activities: revealed by magnetoencephalography

PubMed Central

2013-01-01

Background It has been proposed that an inappropriately conditioned fatigue sensation could be one cause of chronic fatigue. Although classical conditioning of the fatigue sensation has been reported in rats, there have been no reports in humans. Our aim was to examine whether classical conditioning of the mental fatigue sensation can take place in humans and to clarify the neural mechanisms of fatigue sensation using magnetoencephalography (MEG). Methods Ten and 9 healthy volunteers participated in a conditioning and a control experiment, respectively. In the conditioning experiment, we used metronome sounds as conditioned stimuli and two-back task trials as unconditioned stimuli to cause fatigue sensation. Participants underwent MEG measurement while listening to the metronome sounds for 6 min. Thereafter, fatigue-inducing mental task trials (two-back task trials), which are demanding working-memory task trials, were performed for 60 min; metronome sounds were started 30 min after the start of the task trials (conditioning session). The next day, neural activities while listening to the metronome for 6 min were measured. Levels of fatigue sensation were also assessed using a visual analogue scale. In the control experiment, participants listened to the metronome on the first and second days, but they did not perform conditioning session. MEG was not recorded in the control experiment. Results The level of fatigue sensation caused by listening to the metronome on the second day was significantly higher relative to that on the first day only when participants performed the conditioning session on the first day. Equivalent current dipoles (ECDs) in the insular cortex, with mean latencies of approximately 190 ms, were observed in six of eight participants after the conditioning session, although ECDs were not identified in any participant before the conditioning session. Conclusions We demonstrated that the metronome sounds can cause mental fatigue sensation as a result of repeated pairings of the sounds with mental fatigue and that the insular cortex is involved in the neural substrates of this phenomenon. PMID:23764106

Work-related limitations and return-to-work experiences in prolonged fatigue: workers' perspectives before and after vocational treatment.

PubMed

Joosen, Margot C W; Frings-Dresen, Monique H W; Sluiter, Judith K

2011-01-01

To gain insight into fatigued workers' perspectives regarding work experience before and after receiving vocational rehabilitation (VR) treatments. A qualitative survey was conducted using semi-structured interviews with 21 fatigued workers who attended an outpatient multi-component VR treatment. Six months after treatment, work-related limitations and employed VR strategies at work before treatment were explored. Next, VR treatment experiences regarding return-to-work (RTW) were explored. Two researchers performed partially independent, qualitative analyses that revealed topics, discussed by the project team, and organised into domains, categories and sub-categories. Work-related limitations were: symptoms of prolonged fatigue, personal limitations (e.g. lack of self-reflection on individual capacity and limitations), interpersonal factors, activities and conditions at work and life/work imbalance. Before the treatment, VR strategies such as work adaptations, well-intentioned advice and support, and/or referral to psychological or physical care were employed. VR treatment experiences on RTW were: personal challenges (e.g. gained awareness and coping skills), improved activities during work, work adaptations and unresolved problems (e.g. remaining fatigue symptoms and sickness absence). New information about work experiences before and after multi-component VR treatments in workers with prolonged fatigue may help employers, occupational physicians and other caregivers to develop VR strategies that better meet individuals' needs.

An assessment of fatigue in patients with postural orthostatic tachycardia syndrome.

PubMed

Wise, Shelby; Ross, Amanda; Brown, Abigail; Evans, Meredyth; Jason, Leonard

2017-05-01

Individuals with postural orthostatic tachycardia syndrome share many symptoms with those who have chronic fatigue syndrome; one of which is severe fatigue. Previous literature found that those with chronic fatigue syndrome experience many forms of fatigue. The goal of this study was to investigate whether individuals with postural orthostatic tachycardia syndrome also experience multidimensional fatigue and whether these individuals can be clustered into subgroups based on the types of fatigue they endorse. A convenience sample of 138 participants (aged 14-29) with postural orthostatic tachycardia syndrome completed questionnaires that assessed fatigue, brain fog symptom severity, activities that improve brain fog, and brain fog-related disability. An exploratory factor analysis was conducted on the Fatigue Types Questionnaire, and a three-factor solution was produced. Factor scores were then used to cluster the patients into groups using a TwoStep cluster analysis. This resulted in two clusters, a high severity group and a low severity group. The clusters were then compared on a number of items related to symptom expression. Individuals within the more severe cluster had significantly more brain fog at the beginning and end of the survey when compared to cluster two. Those in the more severe cluster also described more activity impairment as well as more frequent, more severe, and more debilitation from postural orthostatic tachycardia syndrome and brain fog. The findings of the factor analysis suggest that patients with postural orthostatic tachycardia syndrome experience fatigue as a multidimensional construct and they also can be subgrouped based on symptom severity.

Exercise-Induced Fatigue and Caffeine Supplementation Affect Psychomotor Performance but Not Covert Visuo-Spatial Attention

PubMed Central

Connell, Charlotte J. W.; Thompson, Benjamin; Kuhn, Gustav; Gant, Nicholas

2016-01-01

Fatigue resulting from strenuous exercise can impair cognition and oculomotor control. These impairments can be prevented by administering psychostimulants such as caffeine. This study used two experiments to explore the influence of caffeine administered at rest and during fatiguing physical exercise on spatial attention—a cognitive function that is crucial for task-based visually guided behavior. In independent placebo-controlled studies, cohorts of 12 healthy participants consumed caffeine and rested or completed 180 min of stationary cycling. Covert attentional orienting was measured in both experiments using a spatial cueing paradigm. We observed no alterations in attentional facilitation toward spatial cues suggesting that covert attentional orienting is not influenced by exercise fatigue or caffeine supplementation. Response times were increased (impaired) after exercise and this deterioration was prevented by caffeine supplementation. In the resting experiment, response times across all conditions and cues were decreased (improved) with caffeine. Covert spatial attention was not influenced by caffeine. Together, the results of these experiments suggest that covert attentional orienting is robust to the effects of fatiguing exercise and not influenced by caffeine. However, exercise fatigue impairs response times, which can be prevented by caffeine, suggesting that pre-motor planning and execution of the motor responses required for performance of the cueing task are sensitive to central nervous system fatigue. Caffeine improves response time in both fatigued and fresh conditions, most likely through action on networks controlling motor function. PMID:27768747

Exercise-Induced Fatigue and Caffeine Supplementation Affect Psychomotor Performance but Not Covert Visuo-Spatial Attention.

PubMed

Connell, Charlotte J W; Thompson, Benjamin; Kuhn, Gustav; Gant, Nicholas

2016-01-01

Fatigue resulting from strenuous exercise can impair cognition and oculomotor control. These impairments can be prevented by administering psychostimulants such as caffeine. This study used two experiments to explore the influence of caffeine administered at rest and during fatiguing physical exercise on spatial attention-a cognitive function that is crucial for task-based visually guided behavior. In independent placebo-controlled studies, cohorts of 12 healthy participants consumed caffeine and rested or completed 180 min of stationary cycling. Covert attentional orienting was measured in both experiments using a spatial cueing paradigm. We observed no alterations in attentional facilitation toward spatial cues suggesting that covert attentional orienting is not influenced by exercise fatigue or caffeine supplementation. Response times were increased (impaired) after exercise and this deterioration was prevented by caffeine supplementation. In the resting experiment, response times across all conditions and cues were decreased (improved) with caffeine. Covert spatial attention was not influenced by caffeine. Together, the results of these experiments suggest that covert attentional orienting is robust to the effects of fatiguing exercise and not influenced by caffeine. However, exercise fatigue impairs response times, which can be prevented by caffeine, suggesting that pre-motor planning and execution of the motor responses required for performance of the cueing task are sensitive to central nervous system fatigue. Caffeine improves response time in both fatigued and fresh conditions, most likely through action on networks controlling motor function.

Reduction of ETS-VI Laser Communication Equipment Optical-Downlink Telemetry Collected During GOLD

NASA Technical Reports Server (NTRS)

Toyoshima, M.; Araki, K.; Arimoto, Y.; Toyoda, M.; Jeganathan, M.; Wilson, K.; Lesh, J. R.

1997-01-01

Free-space laser communications experiments were conducted between the laser communication equipment (LCE) on board the Japanese Engineering Test Satellite VI (ETS-VI) and the ground station located at the Table Mountain Facility (TMF) during late 1995 and early 1996. This article describes the on-line data reduction process used to decode LCE telemetry (called E2) downlinked on the optical carrier during the Ground/Orbiter Lasercomm Demonstration (GOLD) experiments. The LCE has the capability of transmitting real-time sensor and status information at 128 kbps by modulating the onboard diode laser. The optical downlink was detected on the ground, bit synchronized, and the resulting data stream stored on a data recorder. The recorded data were subsequently decoded by on-line data processing that included cross-correlation of the known telemetry data format and the downlink data stream. Signals obtained from the processing can be useful not only in evaluating the characteristics of the LCE but also in understanding uplink and downlink signal quality.

Cumulative fatigue damage behavior of MAR M-247

NASA Technical Reports Server (NTRS)

Mcgaw, Michael A.; Halford, Gary R.; Kalluri, Sreeramesh

1991-01-01

The objective was to examine the room temperature fatigue and nonlinear cumulative fatigue damage behavior of the cast nickel-based superalloy, MAR M-247. The fatigue test matrix consisted of single-level, fully reversed fatigue experiments. Two series of tests were performed: one of the two baseline fatigue LCF (Low-Cycle Fatigue) life levels was used in the first loading block, and the HCF (High-Cycle Fatigue) baseline loading level was used in the second block in each series. For each series, duplicate tests were performed at each applied LCF life fraction.

Experimental Constraints on the Fatigue of Icy Satellite Lithospheres by Tidal Forces

NASA Astrophysics Data System (ADS)

Hammond, Noah P.; Barr, Amy C.; Cooper, Reid F.; Caswell, Tess E.; Hirth, Greg

2018-02-01

Fatigue can cause materials that undergo cyclic loading to experience brittle failure at much lower stresses than under monotonic loading. We propose that the lithospheres of icy satellites could become fatigued and thus weakened by cyclical tidal stresses. To test this hypothesis, we performed a series of laboratory experiments to measure the fatigue of water ice at temperatures of 198 K and 233 K and at a loading frequency of 1 Hz. We find that ice is not susceptible to fatigue at our experimental conditions and that the brittle failure stress does not decrease with increasing number of loading cycles. Even though fatigue was not observed at our experimental conditions, colder temperatures, lower loading frequencies, and impurities in the ice shells of icy satellites may increase the likelihood of fatigue crack growth. We also explore other mechanisms that may explain the weak behavior of the lithospheres of some icy satellites.

Automatic Detection of Driver Fatigue Using Driving Operation Information for Transportation Safety

PubMed Central

Li, Zuojin; Chen, Liukui; Peng, Jun; Wu, Ying

2017-01-01

Fatigued driving is a major cause of road accidents. For this reason, the method in this paper is based on the steering wheel angles (SWA) and yaw angles (YA) information under real driving conditions to detect drivers’ fatigue levels. It analyzes the operation features of SWA and YA under different fatigue statuses, then calculates the approximate entropy (ApEn) features of a short sliding window on time series. Using the nonlinear feature construction theory of dynamic time series, with the fatigue features as input, designs a “2-6-6-3” multi-level back propagation (BP) Neural Networks classifier to realize the fatigue detection. An approximately 15-h experiment is carried out on a real road, and the data retrieved are segmented and labeled with three fatigue levels after expert evaluation, namely “awake”, “drowsy” and “very drowsy”. The average accuracy of 88.02% in fatigue identification was achieved in the experiment, endorsing the value of the proposed method for engineering applications. PMID:28587072

Automatic Detection of Driver Fatigue Using Driving Operation Information for Transportation Safety.

PubMed

Li, Zuojin; Chen, Liukui; Peng, Jun; Wu, Ying

2017-05-25

Fatigued driving is a major cause of road accidents. For this reason, the method in this paper is based on the steering wheel angles (SWA) and yaw angles (YA) information under real driving conditions to detect drivers' fatigue levels. It analyzes the operation features of SWA and YA under different fatigue statuses, then calculates the approximate entropy (ApEn) features of a short sliding window on time series. Using the nonlinear feature construction theory of dynamic time series, with the fatigue features as input, designs a "2-6-6-3" multi-level back propagation (BP) Neural Networks classifier to realize the fatigue detection. An approximately 15-h experiment is carried out on a real road, and the data retrieved are segmented and labeled with three fatigue levels after expert evaluation, namely "awake", "drowsy" and "very drowsy". The average accuracy of 88.02% in fatigue identification was achieved in the experiment, endorsing the value of the proposed method for engineering applications.

The Relationship between the Supervision Role and Compassion Fatigue and Burnout in Genetic Counseling.

PubMed

Allsbrook, Katlin; Atzinger, Carrie; He, Hua; Engelhard, Chalee; Yager, Geoffrey; Wusik, Katie

2016-12-01

Many genetic counselors provide supervision to students during their career. Previous studies have shown genetic counselors, in general, are at increased risk for developing compassion fatigue. The purpose of this study was to determine if there was a difference in compassion fatigue and burnout levels in genetic counselors who currently supervise compared to genetic counselors who do not. Genetic counselors who currently practice in a clinical setting (N = 391) completed an online survey containing demographic questions, the Professional Quality of Life Scale, the State-Trait Anxiety Inventory, and questions specific to the genetic counselor's experiences with supervision. Overall, when controlling for trait-anxiety, the supervision role by itself was not independently associated with the risk for compassion fatigue and burnout among genetic counselors. Within supervisors, however, there were several factors which were associated with this risk. Those with less supervision experience reported more secondary traumatic stress. Those supervisors reporting less confidence had decreased compassion satisfaction. Those with less experience or less confidence in their supervision role were most likely to be at increased risk for developing compassion fatigue. Training in supervision and support for dealing with compassion fatigue and burnout may be beneficial to supervisors with less experience.

Production of enzymes by a newly isolated Bacillus sp. TMF-1 in solid state fermentation on agricultural by-products: The evaluation of substrate pretreatment methods.

PubMed

Salim, Abdalla Ali; Grbavčić, Sanja; Šekuljica, Nataša; Stefanović, Andrea; Jakovetić Tanasković, Sonja; Luković, Nevena; Knežević-Jugović, Zorica

2017-03-01

Study on potential of different agro-industrial waste residues for supporting the growth of newly isolated Bacillus sp. TMF-1 strain under solid-state fermentation (SSF) was conducted aiming to produce several industrially valuable enzymes. Since the feasibility of the initial study was confirmed, further objectives included evaluation of several pretreatments of the studied agricultural by-products (soybean meal, sunflower meal, maize bran, maize pericarp, olive oil cake and wheat bran) on the microbial productivity as means of enhancing the yields of produced proteases, α-amylases, cellulases and pectinases. Among acid/alkaline treatment, ultrasound and microwave assisted methods, chemical treatments superiorly affected most of the studied substrates. Highest yields of produced proteases (50.5IUg -1 ) and α-amylases (50.75IUg -1 ) were achieved on alkaline treated corn pericarp. Alkaline treatment also promoted the secretion of cellulases on maize bran (1.19IUg -1 ). Highest yield of pectinases was obtained on untreated soybean meal (64.90IUg -1 ). Copyright © 2016 Elsevier Ltd. All rights reserved.

Progress in Design and Construction of the Optical Communications Laser Laboratory

NASA Technical Reports Server (NTRS)

Wilson, K. E.; Britcliffe, M.; Golshan, N.

1999-01-01

The deployment of advanced hyperspectral imaging and other Earth sensing instruments on board Earth observing satellites is driving the demand for high-data-rate communications. Optical communications meet the required data rates with small, low mass, and low-power communications packages. JPL, as NASA's lead center in optical communications, plans to construct a 1-m Optical Communications Telescope Laboratory (OCTL) at its Table Mountain Facility (TMF) complex in the San Gabriel Mountains of Southern California. The design of the building has been completed, and the construction contractor has been selected. Ground breaking is expected to start at the beginning of the 1999 TMF construction season. A request for proposal (RFP) has been issued for the procurement of the telescope system. Prior to letting the RFP we conducted a request for information with industry for the telescope system. Several vendors responded favorably and provided information on key elements of the proposed design. These inputs were considered in developing the final requirements in the RFP. Keywords: Free space optical communications, lasercom, telescopes, ground stations, adaptive optics, astrometry, Table Mountain Facility

Fatigue-related firing of muscle nociceptors reduces voluntary activation of ipsilateral but not contralateral lower limb muscles.

PubMed

Kennedy, David S; Fitzpatrick, Siobhan C; Gandevia, Simon C; Taylor, Janet L

2015-02-15

During fatiguing upper limb exercise, maintained firing of group III/IV muscle afferents can limit voluntary drive to muscles within the same limb. It is not known if this effect occurs in the lower limb. We investigated the effects of group III/IV muscle afferent firing from fatigued ipsilateral and contralateral extensor muscles and ipsilateral flexor muscles of the knee on voluntary activation of the knee extensors. In three experiments, we examined voluntary activation of the knee extensors by measuring changes in superimposed twitches evoked by femoral nerve stimulation. Subjects attended on 2 days for each experiment. On one day a sphygmomanometer cuff occluded blood flow of the fatigued muscles to maintain firing of group III/IV muscle afferents. After a 2-min extensor contraction (experiment 1; n = 9), mean voluntary activation was lower with than without maintained ischemia (47 ± 19% vs. 87 ± 8%, respectively; P < 0.001). After a 2-min knee flexor maximal voluntary contraction (MVC) (experiment 2; n = 8), mean voluntary activation was also lower with than without ischemia (59 ± 21% vs. 79 ± 9%; P < 0.01). After the contralateral (left) MVC (experiment 3; n = 8), mean voluntary activation of the right leg was similar with or without ischemia (92 ± 6% vs. 93 ± 4%; P = 0.65). After fatiguing exercise, activity in group III/IV muscle afferents reduces voluntary activation of the fatigued muscle and nonfatigued antagonist muscles in the same leg. However, group III/IV muscle afferents from the fatigued left leg had no effect on the unfatigued right leg. This suggests that any "crossover" of central fatigue in the lower limbs is not mediated by group III/IV muscle afferents. Copyright © 2015 the American Physiological Society.

Mechanical degradation of fuel cell membranes under fatigue fracture tests

NASA Astrophysics Data System (ADS)

Khorasany, Ramin M. H.; Sadeghi Alavijeh, Alireza; Kjeang, Erik; Wang, G. G.; Rajapakse, R. K. N. D.

2015-01-01

The effects of cyclic stresses on the fatigue and mechanical stability of perfluorosulfonic acid (PFSA) membranes are experimentally investigated under standard fuel cell conditions. The experiments are conducted ex-situ by subjecting membrane specimens to cyclic uniaxial tension at controlled temperature and relative humidity. The fatigue lifetime is measured in terms of the number of cycles until ultimate fracture. The results indicate that the membrane fatigue lifetime is a strong function of the applied stress, temperature, and relative humidity. The fatigue life increases exponentially with reduced stresses in all cases. The effect of temperature is found to be more significant than that of humidity, with reduced fatigue life at high temperatures. The maximum membrane strain at fracture is determined to decrease exponentially with increasing membrane lifetime. At a given fatigue life, a membrane exposed to fuel cell conditions is shown to accommodate more plastic strain before fracture than one exposed to room conditions. Overall, the proposed ex-situ membrane fatigue experiment can be utilized to benchmark the fatigue lifetime of new materials in a fraction of the time and cost associated with conventional in-situ accelerated stress testing methods.

Three-dimensional measurements of fatigue crack closure

NASA Technical Reports Server (NTRS)

Ray, S. K.; Grandt, A. F., Jr.

1984-01-01

Fatigue crack growth and retardation experiments conducted in polycarbonate test specimen are described. The transparent test material allows optical interferometry measurements of the fatigue crack opening (and closing) profiles. Crack surface displacements are obtained through the specimen thickness and three dimensional aspects of fatigue crack closure are discussed.

Truck driver fatigue risk assessment and management: a multinational survey.

PubMed

Adams-Guppy, Julie; Guppy, Andrew

2003-06-20

As part of an organizational review of safety, interviews and questionnaire surveys were performed on over 700 commercial goods drivers and their managers within a series of related companies operating across 17 countries. The results examine the reported incidence of fatigue-related problems in drivers and their associations with near miss and accident experience as well as work and organizational factors. Experience of fatigue problems while driving was linked to time of day and rotation of shifts, though most associations were small. There were significant associations found between fatigue experiences and driver and management systems of break taking and route scheduling. The quantitative combined with qualitative information suggested that, where feasible, more flexible approaches to managing the scheduling and sequencing of deliveries assisted drivers in managing their own fatigue problems through appropriate break-taking. The results are interpreted within the overarching principles of risk assessment and risk control.

Late Weichselian ice-sheet dynamics and deglaciation history of the northern Svalbard margin

NASA Astrophysics Data System (ADS)

Fransner, O.; Noormets, R. R. N. N.; Flink, A.; Hogan, K.; Dowdeswell, J. A.; O'Regan, M.; Jakobsson, M.

2016-12-01

The glacial evolution of the northern Svalbard margin is poorly known compared with the western margin. Gravity cores, swath bathymetric, sub-bottom acoustic and 2D airgun data are used to investigate the Late Weichselian Svalbard-Barents Ice Sheet history on the northern Svalbard margin. Prograding sequences in Kvitøya and Albertini trough mouths (TMs) indicate ice streaming to the shelf edge multiple times during the Quaternary. While Kvitøya Trough has an associated trough-mouth fan (TMF), Albertini TM is cut back into the shelf edge. Down-faulted bedrock below Albertini TM suggests larger sediment accommodation space there, explaining the absence of a TMF. The bathymetry indicates that ice flow in Albertini Trough was sourced from Duvefjorden and Albertinibukta. Exposed crystalline bedrock likely kept the two ice flows separated before merging north of Karl XII-Øya. Subglacial landforms in Rijpfjorden and Duvefjorden indicate that both fjords accommodated northward-flowing ice streams during the LGM. The deeper fjord basin and higher elongation ratios of landforms in Duvefjorden suggest a more focused and/or larger ice flow there. Easily erodible sedimentary rocks are common in Duvefjorden, which may explain different ice flow dynamics in these fjords. Kvitøya TMF is flanked by gullies, probably formed through erosive downslope gravity flows triggered by sediment-laden meltwater during early deglaciation. Glacial landforms in Albertini Trough comprise retreat-related landforms indicating slow deglaciation. Iceberg scours in Albertini Trough suggest the importance of calving for mass-loss. Sets of De Geer moraines in Rijpfjorden imply that slow, grounded retreat continued in <210 m water depth. Lack of retreat-related landforms in deeper areas of Rijpfjorden and in Duvefjorden indicates floating glacier fronts influenced by calving. 14C ages suggest that deglaciation of inner Rijpfjorden and central Duvefjorden were complete before 10,434 cal a BP and 10,779 cal a BP respectively.

SU-E-P-14: Dosimetric Effects of Magnetic Field in MRI-Guided Radiation Therapy Delivery for Breast Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, G; Currey, A; Li, X

2015-06-15

Purpose: MRI-guided radiation therapy (RT) delivery would be beneficial for breast irradiation. The electron return effect due to the presence of a transverse magnetic field (TMF) may cause dosimetric issues on dose on skin and at the lung-tissue interface. The purpose of this study is to investigate these issues. Methods: IMRT plans with tangential beams and VMAT plans with 200 degree arcs to cover ipsilateral breast were generated for 10 randomly selected breast cancer cases using a research planning system (Monaco, Elekta) utilizing Monte Carlo dose calculation with or without a TMF of 1.5 T. Plans were optimized to delivermore » uniform dose to the whole breast with an exclusion of 5 mm tissue under the skin (PTV-EVAL). All four plans for each patient were re-scaled to have the same PTV-EVAL volume to receive the same prescription dose. The skin is defined as the first 5 mm of ipsilateral-breast tissue, plus extensions in the surrounding region. Results: The presence of 1.5 T TMF resulted in (1)increased skin dose, with the mean and maximum skin dose increase of 5% and 9%, respectively; (2) similar dose homogeneity within the PTV-EVAL; (3) the slightly improved (3%) dose homogeneity in the whole breast; (4) Averages of 9 and 16% increases in V5 and V20, respectively, for ipsilateral lung; and (5) increased the mean heart dose by 34%. VMAT plans don’t improve whole breast dose uniformity as compared that to the tangential plans. Conclusion: The presence of transverse magnetic field in MRI-guided RT delivery for whole breast irradiation can Result in slightly improved dose homogeneity in the whole breast, increased dose to the ipsilateral lung, heart, and skin. Plan optimization with additional specific dose volume constraints may eliminate/reduce these dose increases. This work is partially supported by Elekta Inc.« less

Flavonoids-Rich Orthosiphon stamineus Extract as New Candidate for Angiotensin I-Converting Enzyme Inhibition: A Molecular Docking Study.

PubMed

Shafaei, Armaghan; Sultan Khan, Md Shamsuddin; F A Aisha, Abdalrahim; Abdul Majid, Amin Malik Shah; Hamdan, Mohammad Razak; Mordi, Mohd Nizam; Ismail, Zhari

2016-11-09

This study aims to evaluate the in vitro angiotensin-converting enzyme (ACE) inhibition activity of different extracts of Orthosiphon stamineus (OS) leaves and their main flavonoids, namely rosmarinic acid (RA), sinensetin (SIN), eupatorin (EUP) and 3'-hydroxy-5,6,7,4'-tetramethoxyflavone (TMF). Furthermore, to identify possible mechanisms of action based on structure-activity relationships and molecular docking. The in vitro ACE inhibition activity relied on determining hippuric acid (HA) formation from ACE-specific substrate (hippuryl-histidyl-leucine (HHL)) by the action of ACE enzyme. A High Performance Liquid Chromatography method combined with UV detection was developed and validated for measurement the concentration of produced HA. The chelation ability of OS extract and its reference compounds was evaluated by tetramethylmurexide reagent. Furthermore, molecular docking study was performed by LeadIT-FlexX : BioSolveIT's LeadIT program. OS ethanolic extract (OS-E) exhibited highest inhibition and lowest IC 50 value (45.77 ± 1.17 µg/mL) against ACE compared to the other extracts. Among the tested reference compounds, EUP with IC 50 15.35 ± 4.49 µg/mL had highest inhibition against ACE and binding ability with Zn (II) (56.03% ± 1.26%) compared to RA, TMF and SIN. Molecular docking studies also confirmed that flavonoids inhibit ACE via interaction with the zinc ion and this interaction is stabilized by other interactions with amino acids in the active site. In this study, we have demonstrated that changes in flavonoids active core affect their capacity to inhibit ACE. Moreover, we showed that ACE inhibition activity of flavonoids compounds is directly related to their ability to bind with zinc ion in the active site of ACE enzyme. It was also revealed that OS extract contained high amount of flavonoids other than RA, TMF, SIN and EUP. As such, application of OS extract is useful as inhibitors of ACE.

You make me tired: An experimental test of the role of interpersonal operant conditioning in fatigue.

PubMed

Lenaert, Bert; Jansen, Rebecca; van Heugten, Caroline M

2018-04-01

Chronic fatigue is highly prevalent in the general population as well as in multiple chronic diseases and psychiatric disorders. Its etiology however remains poorly understood and cannot be explained by biological factors alone. Occurring in a psychosocial context, the experience and communication of fatigue may be shaped by social interactions. In particular, interpersonal operant conditioning may strengthen and perpetuate fatigue complaints. In this experiment, individuals (N = 44) repeatedly rated their currently experienced fatigue while engaging in cognitive effort (working memory task). Subtle social reward was given when fatigue increased relative to the previous rating; or disapproval when fatigue decreased. In the control condition, only neutral feedback was given. Although all participants became more fatigued during cognitive effort, interpersonal operant conditioning led to increased fatigue reporting relative to neutral feedback. This effect occurred independently of conscious awareness. Interestingly, the experimental condition also performed worse on the working memory task. Results suggest that fatigue complaints (and cognitive performance) may become controlled by their consequences such as social reward, and not exclusively by their antecedents such as effort. Results have implications for treatment development and suggest that interpersonal operant conditioning may contribute to fatigue becoming a chronic symptom. Copyright © 2018 Elsevier Ltd. All rights reserved.

Commentary: Listening Can Be Exhausting—Fatigue in Children and Adults With Hearing Loss

PubMed Central

Bess, Fred H.; Hornsby, Benjamin W. Y.

2017-01-01

Anecdotal reports of fatigue after sustained speech-processing demands are common among adults with hearing loss; however, systematic research examining hearing loss–related fatigue is limited, particularly with regard to fatigue among children with hearing loss (CHL). Many audiologists, educators, and parents have long suspected that CHL experience stress and fatigue as a result of the difficult listening demands they encounter throughout the day at school. Recent research in this area provides support for these intuitive suggestions. In this article, the authors provide a framework for understanding the construct of fatigue and its relation to hearing loss, particularly in children. Although empirical evidence is limited, preliminary data from recent studies suggest that some CHL experience significant fatigue—and such fatigue has the potential to compromise a child’s performance in the classroom. In this commentary, the authors discuss several aspects of fatigue including its importance, definitions, prevalence, consequences, and potential linkage to increased listening effort in persons with hearing loss. The authors also provide a brief synopsis of subjective and objective methods to quantify listening effort and fatigue. Finally, the authors suggest a common-sense approach for identification of fatigue in CHL; and, the authors briefly comment on the use of amplification as a management strategy for reducing hearing-related fatigue. PMID:25255399

Static Fatigue of a Siliconized Silicon Carbide

DTIC Science & Technology

1987-03-01

flexitral stress rupture and stepped temperature stress rupture (STSR) testing were performed to assess the static fatigue and creep resistances. Isothermal... stress rupture experiments were performed at 1200 0C in air for com- parison to previous results. - 10 STSR experiments 15 were under deadweight...temperature and stress levels that static fatigue and creep processes are active. The applied stresses were computed on the basis of the elastic

Bending stresses in spherically hollow ball bearing and fatigue experiments

NASA Technical Reports Server (NTRS)

Nypan, L. J.; Coe, H. H.; Parker, R. J.

1975-01-01

Spherically hollow balls of 21.7, 50.0, and 56.5 percent mass reduction were operated in ball bearings and in a five-ball fatigue tester with differing outcomes. Available theoretical and experimental treatments of stresses in spherically hollow balls are reviewed and compared. Bending stresses are estimated for these spherically hollow balls to better understand the differences in ball bearing and fatigue test experience.

Clinically distinct trajectories of fatigue and their longitudinal relationship with the disturbance of personal goals following a cancer diagnosis.

PubMed

Müller, Fabiola; Tuinman, Marrit A; Janse, Moniek; Almansa, Josué; Sprangers, Mirjam A G; Smink, Ans; Ranchor, Adelita V; Fleer, Joke; Hagedoorn, Mariët

2017-09-01

Most studies on fatigue in patients with cancer aggregate its prevalence and severity on a group level, ignoring the possibility that subgroups of patients may differ widely in their development of fatigue. This study aimed to identify subgroups of patients with clinically distinct trajectories of fatigue from diagnosis to 18 months post-diagnosis. As fatigue might trigger goal disturbance, the study also identified trajectories of concrete and abstract goal disturbance and longitudinally examined their co-occurrence with fatigue. Prospective design with quantitative and qualitative method of data collection. Patients with colorectal cancer (n = 183) reported on their levels of fatigue and goal disturbance shortly after diagnosis (T 1 ) and at 7 months (T 2 ) and 18 months (T 3 ) post-diagnosis. Growth mixture model analyses were performed to identify trajectories of fatigue and goal disturbance. Guidelines for the clinical relevance of fatigue were applied. Four clinically distinct trajectories of fatigue were identified as follows: (1) persistent severe fatigue (25.4%), (2) moderate fatigue (56.1%), (3) no fatigue (13.8%), and (4) rapidly improving fatigue (4.7%). The majority of patients with cancer reported high disturbance of their concrete goals, while high disturbance of abstract goals was less evident. Fatigue and concrete goal disturbance co-occurred longitudinally. The fatigue and goal disturbance experienced from diagnosis to 18 months post-diagnosis differ considerably for subgroups of patients with cancer. Fatigue and concrete goal disturbance are persistent burdens in the majority of patients. Investigating symptom burden beyond average trends can guide clinicians to identify patients most in need for treatment. Targeting goal disturbance might benefit the psychological well-being in patients suffering from persistent symptoms. Statement of contribution What is already known on this subject? Fatigue is a common and distressing symptom at all stages of the cancer experience. Earlier studies suggest that many patients recover from fatigue after treatment completion. Patients with cancer experience disturbance in their personal goals, which is related to poor psychological well-being. What does this study add? Developments of fatigue and goal disturbance differ between subgroups of patients with cancer but co-occur within these subgroups. About 30% of the patients experience severe fatigue after diagnosis, of which only few patients recover within 18 months post-diagnosis. Targeting goal disturbance might benefit patients with severe and ongoing symptoms. © 2017 The British Psychological Society.

Objective evaluation of fatigue by EEG spectral analysis in steady-state visual evoked potential-based brain-computer interfaces

PubMed Central

2014-01-01

Background The fatigue that users suffer when using steady-state visual evoked potential (SSVEP)-based brain-computer interfaces (BCIs) can cause a number of serious problems such as signal quality degradation and system performance deterioration, users’ discomfort and even risk of photosensitive epileptic seizures, posing heavy restrictions on the applications of SSVEP-based BCIs. Towards alleviating the fatigue, a fundamental step is to measure and evaluate it but most existing works adopt self-reported questionnaire methods which are subjective, offline and memory dependent. This paper proposes an objective and real-time approach based on electroencephalography (EEG) spectral analysis to evaluate the fatigue in SSVEP-based BCIs. Methods How the EEG indices (amplitudes in δ, θ, α and β frequency bands), the selected ratio indices (θ/α and (θ + α)/β), and SSVEP properties (amplitude and signal-to-noise ratio (SNR)) changes with the increasing fatigue level are investigated through two elaborate SSVEP-based BCI experiments, one validates mainly the effectiveness and another considers more practical situations. Meanwhile, a self-reported fatigue questionnaire is used to provide a subjective reference. ANOVA is employed to test the significance of the difference between the alert state and the fatigue state for each index. Results Consistent results are obtained in two experiments: the significant increases in α and (θ + α)/β, as well as the decrease in θ/α are found associated with the increasing fatigue level, indicating that EEG spectral analysis can provide robust objective evaluation of the fatigue in SSVEP-based BCIs. Moreover, the results show that the amplitude and SNR of the elicited SSVEP are significantly affected by users’ fatigue. Conclusions The experiment results demonstrate the feasibility and effectiveness of the proposed method as an objective and real-time evaluation of the fatigue in SSVEP-based BCIs. This method would be helpful in understanding the fatigue problem and optimizing the system design to alleviate the fatigue in SSVEP-based BCIs. PMID:24621009

Levels of fatigue in people with ESRD living in far North Queensland.

PubMed

Bonner, Ann; Wellard, Sally; Caltabiano, Marie

2008-01-01

Levels of fatigue as experienced by people with end stage renal disease (ESRD), were assessed using the Fatigue Severity Scale (FSS). Fatigue, a common symptom reported by people with ESRD, is a multifaceted, subjective experience, which is readily understood by individuals but difficult to measure. There is limited understanding of the level of fatigue experienced by people with ESRD, with research currently limited to people treated with haemodialysis. The FSS was completed by 92 people with ESRD who were patients of a renal service in far North Queensland, Australia. Demographic and renal health history data were also collected with the self-report survey. Comparisons were preformed between overall fatigue levels and different renal disorders, genders, ethnicity and renal replacement therapy (RRT). Participants in this study were more fatigued than the general population; there was no difference in levels of fatigue between gender and ethnicity. Participants with diabetic nephropathy and those who were predialysis were the most fatigued. A significant difference between mean fatigue scores was found for type of RRT [F(3,88) = 2.4, p < 0.05], with participants using peritoneal dialysis reporting the most fatigue. Additionally, participants categorized according to type of RRT, erythropoietin replacement therapy and current haemoglobin levels revealed significant mean differences on fatigue levels [F(3,88) = 2.74, p < 0.05]. People with ESRD experience considerable fatigue; it is particularly important for nurses to understand this level of fatigue impacts on the daily life of patients. These findings provide the preliminary evidence to support the development of renal nursing practice guidelines related to symptom recognition and management of fatigue.

"A Group of Me's": Adult Learning through Group Process: The Experiences of Participants in a Teleconference Delivered Multiple Sclerosis Fatigue Management Program

ERIC Educational Resources Information Center

Preissner, Katharine L.

2013-01-01

Multiple sclerosis (MS) is a chronic, progressive neurological disorder that affects approximately 2.1 million people worldwide. Fatigue is one of the most common and most disabling symptoms of MS. One well-established approach to address fatigue is fatigue management education provided by an occupational therapist. Fatigue management education is…

A Laboratory Experiment on Muscular Metabolism and Fatigue Using the Isolated Frog Muscle Preparation.

ERIC Educational Resources Information Center

Ianuzzo, C. David; And Others

1987-01-01

Describes an experiment which demonstrates the association of particular metabolic biochemical changes and muscular fatigue. Highlights applications related to cellular energy metabolism, metabolic regulation, and muscle energetics. (ML)

Stereoscopic visual fatigue assessment and modeling

NASA Astrophysics Data System (ADS)

Wang, Danli; Wang, Tingting; Gong, Yue

2014-03-01

Evaluation of stereoscopic visual fatigue is one of the focuses in the user experience research. It is measured in either subjective or objective methods. Objective measures are more preferred for their capability to quantify the degree of human visual fatigue without being affected by individual variation. However, little research has been conducted on the integration of objective indicators, or the sensibility of each objective indicator in reflecting subjective fatigue. The paper proposes a simply effective method to evaluate visual fatigue more objectively. The stereoscopic viewing process is divided into series of sessions, after each of which viewers rate their visual fatigue with subjective scores (SS) according to a five-grading scale, followed by tests of the punctum maximum accommodation (PMA) and visual reaction time (VRT). Throughout the entire viewing process, their eye movements are recorded by an infrared camera. The pupil size (PS) and percentage of eyelid closure over the pupil over time (PERCLOS) are extracted from the videos processed by the algorithm. Based on the method, an experiment with 14 subjects was conducted to assess visual fatigue induced by 3D images on polarized 3D display. The experiment consisted of 10 sessions (5min per session), each containing the same 75 images displayed randomly. The results show that PMA, VRT and PERCLOS are the most efficient indicators of subjective visual fatigue and finally a predictive model is derived from the stepwise multiple regressions.

Nondestructive monitoring of fatigue damage evolution in austenitic stainless steel by positron-lifetime measurements

NASA Astrophysics Data System (ADS)

Holzwarth, Uwe; Schaaff, Petra

2004-03-01

Positron-lifetime measurements have been performed on austenitic stainless steel during (i) stress- and (ii) strain-controlled fatigue experiments for different applied stress and strain amplitudes, respectively. For this purpose a generator-detector assembly with a 72Se/72As positron generator [maximum activity 25 μCi (0.9 MBq)] has been mounted on mechanical testing machines in order to measure the positron lifetime without removing the specimens from the load train. The average positron lifetime has been determined by a β+-γ coincidence. The feasibility to use the average positron lifetime for monitoring the evolution of fatigue damage and to predict early failure has been examined. In strain- and stress-controlled experiments the average positron lifetime shows a pronounced increase within the first 10% and 40% of the fatigue life, respectively. In stress-controlled experiments the average positron lifetime at failure depends significantly on the applied stress amplitude. In strain-controlled experiments significantly different positron lifetimes for different applied plastic strain amplitudes are obtained within the first 1.000 fatigue cycles, whereas differences get wiped out during further cycling until failure.

Road characteristics and driver fatigue: a simulator study.

PubMed

Oron-Gilad, Tal; Ronen, Adi

2007-09-01

Two experiments examined the influence of road characteristics on driver fatigue in a prolonged simulator drive. In experiment one, ten military truck drivers drove a mixed route, with straight, winding, and straight highway segments. In experiment two, 16 additional drivers drove either a straight, a winding, or a mixed route. Fatigue symptoms were assessed using performance, subjective, and psychophysiological measures (HRV). We hypothesized that drivers adopt different fatigue-coping strategies relative to the demands of the drive. Thus, on straight roads drivers are more likely to loosen their driving demands by either increasing their driving speed and/or not maintaining the lane position, as the road is tolerant to both strategies, whereas on winding roads, drivers are more likely to increase their speed but not their lane positioning. Our results confirm that decremental changes in driving performance varied among road types. In the straight road components, we found decrements in the quality of lane maintaining (experiment one) and steering quality (experiments one and two) and longitudinal speed (experiment two). In the winding road, we found that drivers increased their driving speed over time (experiments one and two).

Perception, consequences, communication, and strategies for handling fatigue in persons with rheumatoid arthritis of working age--a focus group study.

PubMed

Feldthusen, Caroline; Björk, Mathilda; Forsblad-d'Elia, Helena; Mannerkorpi, Kaisa

2013-05-01

The aim of this study was to describe how persons with rheumatoid arthritis (RA) of working age experience and handle their fatigue in everyday life. Six focus group discussions were conducted focusing on experiences of fatigue in 25 persons with RA (19 women, 6 men), aged 20-60 years. The discussions were recorded, transcribed verbatim, and analyzed according to qualitative content analysis. The analyses resulted in four categories. (1) Perception of fatigue: Fatigue was experienced different from normal tiredness, unpredictable, and overwhelming. It was associated with negative emotions, changed self-image, and fears. Feelings of frustration and shame were central when the persons were forced to omit valued life activities. (2) Consequences due to fatigue: The fatigue caused changes in cognitive ability, ability to act, and overall activity pattern where the increased need for rest and sleep caused an imbalance in daily life. The participants struggled not to let the fatigue interfere with work. The fatigue also brought negative consequences for their significant others. (3) Communicating fatigue: Fatigue was difficult to gain understanding for, and the participants adjusted their communication accordingly; it was important to keep up appearances. During medical consultation, fatigue was perceived as a factor not given much consideration, and the participants expressed taking responsibility for managing their fatigue symptoms themselves. (4) Strategies to handle fatigue: Strategies comprised conscious self-care, mental strategies, planning, and prioritizing. Fatigue caused considerable health problems for persons with RA of working age: negative emotions, imbalance in daily life due to increased need for rest, and difficulties gaining understanding. This draws attention to the importance of developing new modes of care to address fatigue in RA. Person-centered care to improve balance in life may be one approach needing further investigations.

Bending stresses in spherically hollow ball bearing and fatigue experiments

NASA Technical Reports Server (NTRS)

Nypan, L. J.; Coe, H. H.; Parker, R. J.

1975-01-01

Spherically hollow balls of 21.7, 50.0 and 56.5 per cent mass reduction have been operated in ball bearings and in a 5-ball fatigue tester with differing outcomes. Available theoretical and experimental treatments of stresses in spherically hollow balls are reviewed and compared. Bending stresses are estimated for these spherically hollow balls to better understand the differences in ball bearing and fatigue test experience.

Application of Trophic Magnification Factors (TMFs) Under the Water Framework Directive: Some Practical Advice on Selecting and Determining a TMF

EPA Science Inventory

Directive 2013/39/EU amending and updating the Water Framework Directive (2000/60/EC) and its Daughter Directive (the so-called EQS Directive: 2008/105/EC) sets Environmental Quality Standards for biota (EQSbiota) for a number of bioaccumulative chemicals which can pose a threat ...

Application of trophic magnification factors (TMFs) under the Water Framework Directive: some practical advice on selecting and determining a TMF (poster)

EPA Science Inventory

Directive 2013/39/EU amending and updating the Water Framework Directive (2000/60/EC) and its Daughter Directive (the so-called EQS Directive: 2008/105/EC) sets Environmental Quality Standards for biota (EQSbiota) for a number of bioaccumulative chemicals which can pose a threat ...

Geographic, environmental and biotic sources of variation in the nutrient relations of tropical montane forests

Treesearch

James W. Dalling; Katherine Heineman; Grizelle Gonzalez; Rebecca Ostertag

2016-01-01

Tropicalmontane forests (TMF) are associated with a widely observed suite of characteristics encompassing forest structure, plant traits and biogeochemistry.With respect to nutrient relations, montane forests are characterized by slow decomposition of organic matter, high investment in below-ground biomass and poor litter quality, relative to tropical lowland forests....

Estimation of Axial Fretting Fatigue Life at Elevated Temperatures Using Critical Distance Theory

NASA Astrophysics Data System (ADS)

Majzoobi, G. H.; Azhdarzadeh, P.

Fretting fatigue life is traditionally estimated by experiment. The objective of this work is to introduce a special approach for estimation of axial fretting fatigue life at elevated temperatures from plain fatigue test based on the critical distance theory. The method uses Fatemi-Socie parameter as a multiaxial criterion to compute the stress multiaxiality on focus path. This method considers only elastic behavior for materials, and two characteristic diagrams are obtained from plain fatigue tests on two U-shaped and V-shaped notched specimens. The results showed reasonable agreement between the predictions by the proposed method and the experiments for ambient temperature. For elevated temperatures, the results indicated that the predicted fretting fatigue life was considerably overestimated in the low cycle fatigue (LCF) regime and underestimated in the high cycle fatigue (HCF) region with respect to experimental measurements. The reason for such discrepancy is believed to be due to the complex behavior of AL 7075-T6, which exhibits at elevated temperatures because of the problems such as aging, oxidation and reduction of strength.

Ultrasonic fatigue of SiC particle reinforced aluminum in the VHCF-regime

NASA Astrophysics Data System (ADS)

Wolf, M.; Wagner, G.; Eifler, D.

At the WKK ultrasonic testing facilities (UTF) are used to perform fatigue experiments in the VHCF regime with a frequency of 20 kHz. These systems allow an on-line characterization of the actual fatigue state by changes of different process parameters such as generator power, displacement, temperature or frequency-response characteristic. Moreover the experiments can be interrupted at user defined events in order to investigate variations of the surface microstructure or changes in the electrical resistance of the specimens. The fatigue tests were realized as load increase tests as well as constant amplitude tests.

Effects of work experience on fatigue-induced biomechanical changes during repetitive asymmetric lifts/lowers.

PubMed

Lee, Jungyong; Nussbaum, Maury A; Kyung, Gyouhyung

2014-01-01

Repetitive lifting/lowering is associated with an increased risk of work-related low back disorders (WRLBDs), and fatigue may exacerbate such risk. Work methods used by experienced workers are potential models for developing worker training to reduce WRLBDs, though whether experience modifies the effects of fatigue on WRLBD risk is largely unknown. Here, six novices and six experienced workers completed 185 cycles of repetitive, asymmetric lifts/lowers. Physical demands, whole-body balance and torso movement stability were assessed using torso kinematics/kinetics, linear/angular momenta and Lyapunov exponents, respectively. Several fatigue-induced changes in movement strategies were evident. Novices decreased and experienced workers increased peak lumbar moments post-fatigue, suggesting lower WRLBD risks among the former in terms of torso kinetics. Other than lumbar moments, though, fatigue substantially reduced group-level differences in torso twisting velocities and accelerations. Post-fatigue movement strategies of experienced workers thus did not appear to be advantageous in terms of WRLBD risk.

Effect of mental fatigue on the central nervous system: an electroencephalography study

PubMed Central

2012-01-01

Background Fatigue can be classified as mental and physical depending on its cause, and each type of fatigue has a multi-factorial nature. We examined the effect of mental fatigue on the central nervous system using electroencephalography (EEG) in eighteen healthy male volunteers. Methods After enrollment, subjects were randomly assigned to two groups in a single-blinded, crossover fashion to perform two types of mental fatigue-inducing experiments. Each experiment consisted of four 30-min fatigue-inducing 0- or 2-back test sessions and two evaluation sessions performed just before and after the fatigue-inducing sessions. During the evaluation session, the participants were assessed using EEG. Eleven electrodes were attached to the head skin, from positions F3, Fz, F4, C3, Cz, C4, P3, Pz, P4, O1, and O2. Results In the 2-back test, the beta power density on the Pz electrode and the alpha power densities on the P3 and O2 electrodes were decreased, and the theta power density on the Cz electrode was increased after the fatigue-inducing mental task sessions. In the 0-back test, no electrodes were altered after the fatigue-inducing sessions. Conclusions Different types of mental fatigue produced different kinds of alterations of the spontaneous EEG variables. Our findings provide new perspectives on the neural mechanisms underlying mental fatigue. PMID:22954020

The influence of temperature on fatigue-crack growth in a mill annealed Ti-6Al-4V alloy

NASA Technical Reports Server (NTRS)

Wei, R. P.; Ritter, D. L.

1972-01-01

To understand the influence temperature on the rate of fatigue crack growth in high strength metal alloys, constant load amplitude, fatigue crack growth experiments were carried out using a 1/4-inch-thick (6.35 mm) mill annealed Ti-6Al-4V alloy plate as a model material. The rates of fatigue crack growth were determined as a function of temperature, ranging from room temperature to about 290 C (or, about 550 F/563K) and as a function of the crack tip stress intensity factor in a dehumidified high purity argon environment. Limited correlative experiments indicate that dehumidified oxygen and hydrogen have no effect on the rate of fatigue crack growth in this alloy, while distilled water increased the rate of crack growth slightly in the range tested. Companion fractographic examinations suggest that the mechanisms for fatigue crack growth in the various environments are essentially the same.

A proposed USAF fatigue evaluation program based upon recent systems experience

NASA Technical Reports Server (NTRS)

Haviland, G. P.; Purkey, G. F.

1972-01-01

The United States Air Force has published a document entitled Aircraft Structural Integrity Program. One phase of the program is concerned with the fatigue life certification of all types of military aircraft. The document describes the criteria, analyses, and tests that are necessary in order to satisfy the USAF fatigue life requirement. Some recent and valid criticism has been directed toward the document, particularly the fatigue-life requirements contained in it. Some changes are proposed based on surveys conducted in the United States and abroad as well as some recent systems' experience. The surveys covered both military and civilian organizations. The fatigue certification case histories of selected military and commercial aircraft are presented. The design development element tests, preproduction design verification tests, and full-scale fatigue tests of each are described. A brief status report on the revisions to the MIL-A-008860 series specifications is included.

I’ve lost the person I used to be—Experiences of the consequences of fatigue following myocardial infarction

PubMed Central

Fredriksson-Larsson, Ulla; Alsen, Pia; Brink, Eva

2013-01-01

Fatigue has been found to be the most frequent and bothersome symptom after myocardial infarction (MI), influencing health-related quality of life negatively. Moreover, fatigue after MI has been described as incomprehensible due to its unpredictable occurrence and lack of relationship to physical effort. The aim of this study is therefore to explore persons’ experiences of consequences of fatigue and their strategies for dealing with it 2 months after MI. In total, 18 informants, aged 42–75 years, participated in the study. Interviews were conducted and analysed using constructivist grounded theory methodology. Grounded in the data, the main consequence of fatigue, as illustrated in the core category, was: I’ve lost the person I used to be. It indicates a sense of reduced ability to manage daily life due to experiences of fatigue. The core category was developed from the four categories: involuntary thoughts, certainties replaced with question marks, driving with the handbrake on and just being is enough. Furthermore, attempts to relieve fatigue were limited. These findings indicate that patients with symptoms of fatigue should be supported in developing relief strategies, for example, rest and sleep hygiene as well as physical activity. In conclusion, the results show that fatigue can be understood in light of the concepts “comprehensibility” and “manageability.” They also indicate that, working from a person-centered perspective, health-care professionals can support patients experiencing post-MI fatigue by giving them opportunities to straighten out the question marks and by inviting them to discuss involuntary thoughts and feelings of being restricted in their daily life functioning. PMID:23769653

Muscle fatigue examined at different temperatures in experiments on intact mammalian (rat) muscle fibers.

PubMed

Roots, H; Ball, G; Talbot-Ponsonby, J; King, M; McBeath, K; Ranatunga, K W

2009-02-01

In experiments on small bundles of intact fibers from a rat fast muscle, in vitro, we examined the decline in force in repeated tetanic contractions; the aim was to characterize the effect of shortening and of temperature on the initial phase of muscle fatigue. Short tetanic contractions were elicited at a control repetition rate of 1/60 s, and fatigue was induced by raising the rate to 1/5 s for 2-3 min, both in isometric mode (no shortening) and in shortening mode, in which each tetanic contraction included a ramp shortening at a standard velocity. In experiments at 20 degrees C (n = 12), the force decline during a fatigue run was 25% in the isometric mode but was significantly higher (35%) in the shortening mode. In experiments at different temperatures (10-30 degrees C, n = 11), the tetanic frequency and duration were adjusted as appropriate, and for shortening mode, the velocity was adjusted for maximum power output. In isometric mode, fatigue of force was significantly less at 30 degrees C ( approximately 20%) than at 10 degrees C ( approximately 30%); the power output (force x velocity) was >10x higher at 30 degrees C than at 10 degrees C, and power decline during a fatigue run was less at 30 degrees C ( approximately 20-30%) than at 10 degrees C ( approximately 50%). The finding that the extent of fatigue is increased with shortening contractions and is lower at higher temperatures is consistent with the view that force depression by inorganic phosphate, which accumulates within fibers during activity, may be a primary cause of initial muscle fatigue.

Exploring the patient perspective of fatigue in adults with visual impairment: a qualitative study

PubMed Central

Bode, Christina; van der Aa, Hilde P A; Hulshof, Carel T J; Bosmans, Judith E; van Rens, Gerardus H M B; van Nispen, Ruth M A

2017-01-01

Objectives Fatigue is an often mentioned symptom by patients with irreversible visual impairment. This study explored the patient perspective of fatigue in visually impaired adults with a focus on symptoms of fatigue, causes, consequences and coping strategies. Setting Two large Dutch low vision multidisciplinary rehabilitation organisations. Participants 16 visually impaired adults with severe symptoms of fatigue selected by purposive sampling. Methods A qualitative study involving semistructured interviews. A total of four first-level codes were top–down predetermined in correspondence with the topics of the research question. Verbatim transcribed interviews were analysed with a combination of a deductive and inductive approach using open and axial coding. Results Participants often described the symptoms of fatigue as a mental, daily and physical experience. The most often mentioned causes of fatigue were a high cognitive load, the intensity and amount of activities, the high effort necessary to establish visual perception, difficulty with light intensity and negative cognitions. Fatigue had the greatest impact on the ability to carry out social roles and participation, emotional functioning and cognitive functioning. The most common coping strategies were relaxation, external support, socialising and physical exercise and the acceptance of fatigue. Conclusions Our results indicate that low vision-related fatigue is mainly caused by population specific determinants that seem different from the fatigue experience described in studies with other patient populations. Fatigue may be central to the way patients react, adapt and compensate to the consequences of vision loss. These findings indicate a need for future research aimed at interventions specifically tailored to the unique aspects of fatigue related to vision loss. PMID:28775181

Training-as-treatment: effectiveness of the Certified Compassion Fatigue Specialist Training.

PubMed

Gentry, J Eric; Baggerly, Jennifer; Baranowsky, Anna

2004-01-01

Mental health and other service professionals who work with trauma survivors often experience the debilitating effects of compassion fatigue and caregiver stress. Leaders within the field have called for effective, empirically supported interventions for professionals who experience these negative effects. In response to the call, this study examines the treatment effectiveness of the Certified Compassion Fatigue Specialist Training (CCFST) for 83 participating mental health professionals. Results show a statistically and clinically significant decrease in participants' compassion fatigue and burnout symptoms and increase in their compassion satisfaction. A "training-as-treatment" effect of CCFST is introduced, described, and evaluated. Discussion of these findings, clinical implications, limitations, and future directions are provided. CCFST appears to be an effective intervention for ameliorating compassion fatigue symptoms in mental health professionals.

[Preliminary study of rabbit experiment modality for evaluating cardiac fatigue].

PubMed

Yan, Xiaobo; Luo, Linmei; Liu, Leichu; Xiao, Shouzhong; Deng, Suyuan; Xiang, Lingli; Zhang, Cong

2013-04-01

This paper presents a preliminary study of rabbit experiment modality incorporating a new indicator for evaluating cardiac function changes, providing a basis for subsequent study of cardiac fatigue. Using only biochemical indicators, such as troponins, is difficult to make a distinction between exercise-induced cardiac fatigue (EICF) and exercise-induced cardiac damage (EICD). Therefore, some new indicators are needed to evaluate cardiac fatigue synthetically. In our study, we used New Zealand white rabbits to conduct a multi-step swimming experiments with load. We made the rabbits reach an exhaustive state to evaluate whether the amplitude ratio of the first to second heart sound (S1/S2) and heart rate (HR) during the exhaustive exercise would be decreased and whether they would be able to recover after the exhaustive exercise for 24 hours. During the first phase of swimming, S1/S2 and HR were increased, and then decreased at exhaustive state. They were recovered after the exhaustive exercise for 24 hours. Overloading led to deaths of three rabbis, and new phenomena from overloading and related to this kind of death were observed. The experiments proved that Multi-steps swimming experiments with loads by using New Zealand white rabbit is useful for studying cardiac fatigue and premonition of sudden cardiac death.

Selective Efficacy of Static and Dynamic Imagery in Different States of Physical Fatigue.

PubMed

Kanthack, Thiago Ferreira Dias; Guillot, Aymeric; Altimari, Leandro Ricardo; Nunez Nagy, Susana; Collet, Christian; Di Rienzo, Franck

2016-01-01

There is compelling evidence that motor imagery contributes to improved motor performance, and recent work showed that dynamic motor imagery (dMI) might provide additional benefits by comparison with traditional MI practice. However, the efficacy of motor imagery in different states of physical fatigue remains largely unknown, especially as imagery accuracy may be hampered by the physical fatigue states elicited by training. We investigated the effect of static motor imagery (sMI) and dMI on free-throw accuracy in 10 high-level basketball athletes, both in a non-fatigued state (Experiment 1) and immediately after an incremental running test completed until exhaustion (20 m shuttle run-test-Experiment 2). We collected perceived exhaustion and heart rate to quantify the subjective experience of fatigue and energy expenditure. We found that dMI brought better shooting performance than sMI, except when athletes were physically exhausted. These findings shed light on the conditions eliciting optimal use of sMI and dMI. In particular, considering that the current physical state affects body representation, performing dMI under fatigue may result in mismatches between actual and predicted body states.

Patterns of morning and evening fatigue among adults with HIV/AIDS.

PubMed

Lerdal, Anners; Gay, Caryl L; Aouizerat, Bradley E; Portillo, Carmen J; Lee, Kathryn A

2011-08-01

Describe patterns of morning and evening fatigue in adults with HIV and examine their relationship to demographic and clinical factors and other symptoms. Most studies of HIV-related fatigue assess average levels of fatigue and do not address its diurnal fluctuations. Patterns of fatigue over the course of the day may have important implications for assessment and treatment. A cross-sectional, correlational design was used with six repeated measures over 72 hours. A convenience sample of 318 HIV-infected adults was recruited in San Francisco. Socio-demographic, clinical and symptom data were collected with questionnaires. CD4+ T-cell count and viral load were obtained from medical records. Participants completed a four-item version of the Lee Fatigue Scale each morning and evening for three consecutive days. Participants were grouped based on their diurnal pattern of fatigue (high evening only, high morning only, high morning and evening and low morning and evening). Group comparisons and logistic regression were used to determine the unique predictors of each fatigue pattern. The high evening fatigue pattern was associated with anxiety and the high morning pattern was associated with anxiety and depression. The morning fatigue pattern showed very little fluctuation between morning and evening, the evening pattern showed the largest fluctuation. The high morning and evening pattern was associated with anxiety, depression and sleep disturbance and this group reported the most fatigue-related distress and interference in functioning. These results provide initial evidence for the importance of assessing the patient's daily pattern of fatigue fluctuation, as different patterns were associated with different symptom experiences and perhaps different aetiologies. Different fatigue patterns may benefit from tailored intervention strategies. Management of depressive symptoms could be tested in patients who experience high levels of morning fatigue. © 2011 Blackwell Publishing Ltd.

Enhancement of welded steel bridge girders susceptible to distortion-induced fatigue.

DOT National Transportation Integrated Search

2014-10-01

The goal of this study was to develop and evaluate the performance of retrofit techniques for existing steel : bridges that have already sustained damage due to distortion-induced fatigue, or are anticipated to experience : distortion-induced fatigue...

Doctors' stress responses and poor communication performance in simulated bad-news consultations.

PubMed

Brown, Rhonda; Dunn, Stewart; Byrnes, Karen; Morris, Richard; Heinrich, Paul; Shaw, Joanne

2009-11-01

No studies have previously evaluated factors associated with high stress levels and poor communication performance in breaking bad news (BBN) consultations. This study determined factors that were most strongly related to doctors' stress responses and poor communication performance during a simulated BBN task. In 2007, the authors recruited 24 doctors comprising 12 novices (i.e., interns/residents with 1-3 years' experience) and 12 experts (i.e., registrars, medical/radiation oncologists, or cancer surgeons, with more than 4 years' experience). Doctors participated in simulated BBN consultations and a number of control tasks. Five-minute-epoch heart rate (HR), HR variability, and communication performance were assessed in all participants. Subjects also completed a short questionnaire asking about their prior experience BBN, perceived stress, psychological distress (i.e., anxiety, depression), fatigue, and burnout. High stress responses were related to inexperience with BBN, fatigue, and giving bad versus good news. Poor communication performance in the consultation was related to high burnout and fatigue scores. These results suggest that BBN was a stressful experience for doctors even in a simulated encounter, especially for those who were inexperienced and/or fatigued. Poor communication performance was related to burnout and fatigue, but not inexperience with BBN. These results likely indicate that burnout and fatigue contributed to stress and poor work performance in some doctors during the simulated BBN task.

Aerial Refueling Boom/Receptacle Guide

DTIC Science & Technology

2017-07-28

Alleviation System; AR – Aerial Refueling; IDS – Independent Disconnect System; PDL – Pilot Director Lights; PSIG – Pounds per square inch gauge; TMF...proprietary, sensitive, classified or otherwise restricted information. ARSAG documents, as prepared, are not DOD, MOD or NATO standards, but provide...Boom Nozzle Disconnect Provisions, Aerial Refueling Fuel System and Tanker Aids and Cues for the Receiver Aircraft. Also included are Receiver

Psychometric Evaluation of the Multidimensional Assessment of Fatigue Scale for Use with Pregnant and Postpartum Women

ERIC Educational Resources Information Center

Fairbrother, Nichole; Hutton, Eileen K.; Stoll, Kathrin; Hall, Wendy; Kluka, Sandy

2008-01-01

Although fatigue is a common experience for pregnant women and new mothers, few measures of fatigue have been validated for use with this population. To address this gap, the authors assessed psychometric properties of the Multidimensional Assessment of Fatigue (MAF) scale, which was used in 2 independent samples of pregnant women. Results…

[Simultaneous repairing defects of orbital floor and palate with the modified temporalis muscle flap after the maxillectomy].

PubMed

Zhong, Q; Huang, Z G; Fang, J G; Chen, X J; Chen, X H; Hou, L Z; Li, P D; Ma, H Z; He, S Z

2016-09-07

Objective: To evaluate the outcome of one-stage reconstruction of maxillary and orbital defects with modified temporalis muscle flap (TMF) following the removal of malignant neoplasms. Methods: In this retrospective study, 15 patients underwent the reconstruction of defects of orbital floor and palate after maxillectomy for malignant tumor were included from June 2008 to June 2014. The modified temporalis muscle flap was used to repair the defects after surgery, and functional outcomes were analyzed. Results: All the patients were followed up for 12-81 months. Three cases of them received preoperative radiotherapy and 12 cases underwent postoperative radiotherapy. All flaps were survived. Epithelization of the tissues in oral and nasal cavity was completed in 4-6 weeks. Good functional reconstruction on swallowing and speaking functional results were achieved with maxillary and orbital reconstruction and no secondary deformity of external nose was observed. The eye positions in all cases were normal. Diplopia, diminution and loss of vision were not found. Conclusion: The modified TMF can be used for simultaneous reconstruction for the defects of orbital floor and palate after maxillectomy in patients whom free tissue flap can not be applied to, showing better cosmetic and functional results.

LABVIEW graphical user interface for precision multichannel alignment of Raman lidar at Jet Propulsion Laboratory, Table Mountain Facility.

PubMed

Aspey, R A; McDermid, I S; Leblanc, T; Howe, J W; Walsh, T D

2008-09-01

The Jet Propulsion Laboratory operates lidar systems at Table Mountain Facility (TMF), California (34.4 degrees N, 117.7 degrees W) and Mauna Loa Observatory, Hawaii (19.5 degrees N, 155.6 degrees W) under the framework of the Network for the Detection of Atmospheric Composition Change. To complement these systems a new Raman lidar has been developed at TMF with particular attention given to optimizing water vapor profile measurements up to the tropopause and lower stratosphere. The lidar has been designed for accuracies of 5% up to 12 km in the free troposphere and a detection capability of <5 ppmv. One important feature of the lidar is a precision alignment system using range resolved data from eight Licel transient recorders, allowing fully configurable alignment via a LABVIEW/C++ graphical user interface (GUI). This allows the lidar to be aligned on any channel while simultaneously displaying signals from other channels at configurable altitude/bin combinations. The general lidar instrumental setup and the details of the alignment control system, data acquisition, and GUI alignment software are described. Preliminary validation results using radiosonde and lidar intercomparisons are briefly presented.

The assessment and analysis of astronaut mental fatigue in long-duration spaceflight

NASA Astrophysics Data System (ADS)

Li, Yun; Zhou, Qianxiang; Zu, Xiaoqi

2012-07-01

In the field of aerospace, mental work has become the main form of most operations, and the other operations are mixed works which are mental work dominated. Confined spaces, silent space environment, specified mode of communication, limited contract with the ground and discomfort of weightlessness also can lead to the aggravation and acceleration of mental fatigue. In aerospace activities, due to the instantaneous distraction of operator, slow response or lack of coordination could lead to serious accident, the study of mental fatigue is particularly important. In order to study the impact of continuous mental task and rest, we conducted an experiment which combined subjective evaluation with physiology index evaluation. Five subjects were selected in the experiment, and they were asked to perform continuous operation task in a simulator to imitate astronaut schedule. In the course of the experiment, subjective fatigue score (used Samn-Perelli and SWAT) and EEG power spectra were measured at the following hours: 8:00(starting time), 11:30, 15:00, 19:00, 23:00(before sleep), 6:00(after sleep), and 8:00(end time). The experiment showed that a short rest is not enough to make the subjects restored to the original state. The reduction of high frequency components and increase of low frequency in EEG also became more obvious with the increased mental fatigue. Gravity frequency of EEG had a shift to low frequency and is strongly correlated with mental fatigue level. These phenomena were similar with the results of subjective test. The SWAT also could tell us the main causes of metal fatigue during this process.

Cold Pressor Pain Sensitivity in Twins Discordant for Chronic Fatigue Syndrome

PubMed Central

Ullrich, Phil; Afari, Niloofar; Jacobsen, Clemma; Goldberg, Jack; Buchwald, Dedra

2010-01-01

Objective Individuals with chronic fatigue syndrome (CFS) experience many pain symptoms. The present study examined whether pain and fatigue ratings and pain threshold and tolerance levels for cold pain differed between twins with CFS and their cotwins without CFS. Design Cotwin control design to assess cold pain sensitivity, pain, and fatigue in monozygotic twins discordant for CFS. Patients and Setting Fifteen twin pairs discordant for CFS recruited from the volunteer Chronic Fatigue Twin Registry at the University of Washington. Results Although cold pain threshold and tolerance levels were slightly lower in twins with CFS than their cotwins without CFS, these differences failed to reach statistical significance. Subjective ratings of pain and fatigue at multiple time points during the experimental protocol among twins with CFS were significantly higher than ratings of pain (p = 0.003) and fatigue (p < 0.001) by their cotwins without CFS. Conclusions These results, while preliminary, highlight the perceptual and cognitive components to the pain experience in CFS. Future studies should focus on examining the heritability of pain sensitivity and the underlying mechanisms involved in the perception of pain sensitivity in CFS. PMID:17371408

Driver fatigue alarm based on eye detection and gaze estimation

NASA Astrophysics Data System (ADS)

Sun, Xinghua; Xu, Lu; Yang, Jingyu

2007-11-01

The driver assistant system has attracted much attention as an essential component of intelligent transportation systems. One task of driver assistant system is to prevent the drivers from fatigue. For the fatigue detection it is natural that the information about eyes should be utilized. The driver fatigue can be divided into two types, one is the sleep with eyes close and another is the sleep with eyes open. Considering that the fatigue detection is related with the prior knowledge and probabilistic statistics, the dynamic Bayesian network is used as the analysis tool to perform the reasoning of fatigue. Two kinds of experiments are performed to verify the system effectiveness, one is based on the video got from the laboratory and another is based on the video got from the real driving situation. Ten persons participate in the test and the experimental result is that, in the laboratory all the fatigue events can be detected, and in the practical vehicle the detection ratio is about 85%. Experiments show that in most of situations the proposed system works and the corresponding performance is satisfying.

Parental fatigue and parenting practices during early childhood: an Australian community survey.

PubMed

Cooklin, A R; Giallo, R; Rose, N

2012-09-01

Parenting behaviours are influenced by a range of factors, including parental functioning. Although common, the influence of parental fatigue on parenting practices is not known. The first aim of this study was to investigate the relationship between fatigue and parenting practices. The second aim was to identify parental psychosocial factors significantly associated with fatigue. A sample of 1276 Australian parents, of at least one child aged 0-5 years, completed a survey. Demographic, psychosocial (social support, coping responses) and parental sleep and self-care information was collected. Hierarchical regression was performed to assess the contribution of fatigue (modified Fatigue Assessment Scale) to parental practices (warmth, irritability and involvement), and parenting experiences (Parenting Stress Index, Parenting Sense of Competence Scale). Hierarchical multiple regression assessed the contribution of a range of parental sleep, psychosocial (social support, coping responses) and self-care variables to fatigue when demographic characteristics were held constant. Higher fatigue was significantly associated with lower parental competence (β=-0.17, P < 0.005), greater parenting stress (β= 0.21, P < 0.005) and more irritability in parent-child interactions (β= 0.11, P < 0.005). Several psychosocial characteristics were associated with higher parental fatigue, including inadequate social support, poorer diet, poorer sleep quality and ineffective coping styles including self-blame and behaviour disengagement. Fatigue is common, and results suggest that fatigue contributes to adverse parental practices and experiences. However, possible risk factors for higher fatigue were identified in this study, indicating opportunities for intervention, management and support for parents. © 2011 Blackwell Publishing Ltd.

Exploring the patient perspective of fatigue in adults with visual impairment: a qualitative study.

PubMed

Schakel, Wouter; Bode, Christina; van der Aa, Hilde P A; Hulshof, Carel T J; Bosmans, Judith E; van Rens, Gerardus H M B; van Nispen, Ruth M A

2017-08-03

Fatigue is an often mentioned symptom by patients with irreversible visual impairment. This study explored the patient perspective of fatigue in visually impaired adults with a focus on symptoms of fatigue, causes, consequences and coping strategies. Two large Dutch low vision multidisciplinary rehabilitation organisations. 16 visually impaired adults with severe symptoms of fatigue selected by purposive sampling. A qualitative study involving semistructured interviews. A total of four first-level codes were top-down predetermined in correspondence with the topics of the research question. Verbatim transcribed interviews were analysed with a combination of a deductive and inductive approach using open and axial coding. Participants often described the symptoms of fatigue as a mental, daily and physical experience. The most often mentioned causes of fatigue were a high cognitive load, the intensity and amount of activities, the high effort necessary to establish visual perception, difficulty with light intensity and negative cognitions. Fatigue had the greatest impact on the ability to carry out social roles and participation, emotional functioning and cognitive functioning. The most common coping strategies were relaxation, external support, socialising and physical exercise and the acceptance of fatigue. Our results indicate that low vision-related fatigue is mainly caused by population specific determinants that seem different from the fatigue experience described in studies with other patient populations. Fatigue may be central to the way patients react, adapt and compensate to the consequences of vision loss. These findings indicate a need for future research aimed at interventions specifically tailored to the unique aspects of fatigue related to vision loss. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Fatigue-Arrestor Bolts

NASA Technical Reports Server (NTRS)

Onstott, Joseph W.; Gilster, Mark; Rodriguez, Sergio; Larson, John E.; Wickham, Mark D.; Schoonover, Kevin E.

1995-01-01

Bolts that arrest (or, more precisely, retard) onset of fatigue cracking caused by inelastic strains developed. Specifically developed to be installed in flange holes of unrestrained rocket engine nozzle. Fanges sometimes used to bolt nozzle to test stand; however, when rocket engine operated without this restraint, region around bolt holes experience severe inelastic strains causing fatigue cracking. Interference fits introduce compressive preloads that retard fatigue by reducing ranges of strains. Principle of these fatigue-arrestor bolts also applicable to holes in plates made of other materials and/or used for different purposes.

Failure of the human lumbar motion-segments resulting from anterior shear fatigue loading

PubMed Central

SKRZYPIEC, Daniel M.; NAGEL, Katrin; SELLENSCHLOH, Kay; KLEIN, Anke; PÜSCHEL, Klaus; MORLOCK, Michael M.; HUBER, Gerd

2016-01-01

An in-vitro experiment was designed to investigate the mode of failure following shear fatigue loading of lumbar motion-segments. Human male lumbar motion-segments (age 32–42 years, n=6) were immersed in Ringer solution at 37°C and repeatedly loaded, using a modified materials testing machine. Fatigue loading consisted of a sinusoidal shear load from 0 N to 1,500 N (750 N±750 N) applied to the upper vertebra of the motion-segment, at a frequency of 5 Hz. During fatigue experiments, several failure events were observed in the dynamic creep curves. Post-test x-ray, CT and dissection revealed that all specimens had delamination of the intervertebral disc. Anterior shear fatigue predominantly resulted in fracture of the apophyseal processes of the upper vertebrae (n=4). Exposure to the anterior shear fatigue loading caused motion-segment instability and resulted in vertebral slip corresponding to grade I and ‘mild’ grade II spondylolisthesis, as observed clinically. PMID:26829975

Mountain-Top-to-Mountain-Top Optical Link Demonstration. Part 2

NASA Technical Reports Server (NTRS)

Biswas, A.; Wright, M. W.

2002-01-01

A mountain-top-to-mountain-top optical communications demonstration was conducted between the JPL Table Mountain Facility (TMF), Wrightwood, California, and Strawberry Peak (SP), Lake Arrowhead, California, during the months of August and September of 2000. The link was nearly horizontal at an altitude of 2 km and spanned a range of 46.8 km. A 780-nm multibeam beacon broadcast from TMF was received by the JPL Optical Communications Demonstrator (OCD) located at SP. The received beacon was utilized as a pointing reference to retransmit an 852-nm communications laser beam, modulated at 400 Mb/s by a PN7 pseudo-random bit stream (PRBS) sequence. The long atmospheric path resulted in atmospheric-turbulence-induced angle-of-arrival fluctuations of the beacon at the OCD aperture. A .ne-steering control loop was used to track the resulting beacon centroid motion and update the pointing of the communications laser beam transmitted from SP to TMF. Fried parameters, or r0, inferred from focal spot sizes received at SP were 4 to 5 cm whereas, using the spot sizes received at TMF, they were 2 to 3 cm. In both cases, theory predicts larger r0 values. The predicted angle-of-arrival fluctuations compare well with measured rms displacements exhibited by the focal spots at either end of the link. An uncompensated error of 1.1 rad in the x-axis and 2 rad in the y-axis was obtained using centroid data logged by the OCD. Average bit-error rates of 10-5 were recorded for extended periods of time. An atmospheric coherence length r0 of 3 to 5 cm was inferred using the focal-plane spot size measured on the CCD tracking sensor and compared to a predicted value of 5 to 7 cm using reasonable atmospheric models. The irradiance bounds required for the CCD tracking sensor to perform centroiding was found to range from 2000 to 3000 integrated pixel counts, although a more reliable range was 600 to 3000, indicating a dynamic range of 6 to 11 dB. The motion of the spot on the focal plane was also recorded and yielded rms angle-of-arrival-induced focal-plane displacement of 9 to 11 m, compared to a predicted value of 7.8 to 11 m. The irradiance measurements made with the OCD clearly indicate that best tracking performance is obtained when the mean received signal is 2000 to 2200 counts. The best tracking performance resulted in an rms uncompensated error of 1.1 rad. The uncompensated error appeared to increase with either an increase or decrease in mean beacon-signal level. The rms uncompensated error determined by deriving the beacon displacement power spectral density from the beacon centroid-versustime data and the rejection function of the control loop yielded a higher value of 3.4 rad.

Study on Determination Method of Fatigue Testing Load for Wind Turbine Blade

NASA Astrophysics Data System (ADS)

Liao, Gaohua; Wu, Jianzhong

2017-07-01

In this paper, the load calculation method of the fatigue test was studied for the wind turbine blade under uniaxial loading. The characteristics of wind load and blade equivalent load were analyzed. The fatigue property and damage theory of blade material were studied. The fatigue load for 2MW blade was calculated by Bladed, and the stress calculated by ANSYS. Goodman modified exponential function S-N curve and linear cumulative damage rule were used to calculate the fatigue load of wind turbine blades. It lays the foundation for the design and experiment of wind turbine blade fatigue loading system.

The Boeing 747 fatigue integrity program

NASA Technical Reports Server (NTRS)

Spencer, M. M.

1972-01-01

The fatigue integrity program which was established to insure economic operations and to provide foundation data for inspection and maintenance is discussed. Significant features of the 747 fatigue integrity program are: (1) fatigue analyses which are continually updated to reflect design changes, fatigue test results, and static and flight load survey measurements; (2) material selection and detail design by using initial fatigue analyses, service experience, and testing; and (3) fatigue testing to check detail design quality and to verify the analyses, culminated by the test of a structurally complete airframe. Fatigue stress analyses were performed with the aid of experimental as well as analytical procedures. Extensive application was made of the stress severity factor, developed at Boeing, for evaluating peak stresses in complex joints. A frame of reference was established by families of structural fatigue performance curves (S-N curves) encompassing the range of materials and fatigue qualities anticipated for the 747 airplane design.

When does nursing burnout begin? An investigation of the fatigue experience of Australian nursing students.

PubMed

Rella, Samantha; Winwood, Peter C; Lushington, Kurt

2009-11-01

Investigation of chronic maladaptive fatigue evolution among a large group of Australian Bachelor of Nursing (BN) degree students. The training of Australian nurses has changed from a salaried, 'apprenticeship' structure (usually including accommodation) to a University-based (fee paying) degree. Relatively little is known about how these changes have impacted on the strain and fatigue experience of nursing students. A large group of Australian nursing students across 3 years of a BN course (n = 431) participated in an internet-based cross-sectional design study. Levels of maladaptive fatigue, and poor recovery, increased across the course. By its completion, up to 20% of graduates were reporting signs of serious maladaptive fatigue/stress. Contemporary nurse training places many students under significant psycho-social stress. Need to work for personal support as well as study and absence of adequate training in managing these strains appears to underpin this experience. Nurse Managers need to be alert to the fact that new Graduate Nurse Probationer (GNP) year (or its local equivalent) nurses may already be suffering from significant stress/fatigue. To prevent this progressing to more severe states and potential premature quitting the profession, provision of adequate mentoring and guidance in effective stress management may be essential.

Understanding the meaning of fatigue at the end of life: an ethnoscience approach.

PubMed

Kirshbaum, Marilynne N; Olson, Kärin; Pongthavornkamol, Kanaungnit; Graffigna, Guendalina

2013-04-01

Fatigue is a devastating state of body and mind associated with distress at the end of life. We report the results of the third in a series of papers outlining a novel approach we have developed for understanding the meaning of fatigue by exploring how this meaning is shaped by beliefs and values. The aims of the study were to examine the perception and experiences of fatigue held by patients attending a hospice in England; identify the behavioural patterns that distinguish fatigue from tiredness and exhaustion; provide conceptual definitions of tiredness, fatigue and exhaustion. An Ethnoscience design was selected. The sample comprised nine people who attended a hospice between May and December 2009. Inclusion criteria included: at least 18 years of age, experiencing fatigue, able to provide informed consent and resident in the selected city in northern England for 10 years. Data were collected from two consecutive semi-structured interviews for each participant. We found that tiredness, fatigue and exhaustion are markers of progressive functional decline. Fatigue had two dimensions: 1) Mental Challenge, which included: emotional effects, cognitive realisation of decline and mental tenacity and 2) Physical Challenge, which included: limitations in leisure activities, limitations in functional roles and re-patterning routines. This study provides evidence that symptom experience is socially constructed, which has potential implications for the development of effective interventions. Copyright © 2012 Elsevier Ltd. All rights reserved.

Fatigue Is Associated With Global and Regional Thalamic Morphometry in Veterans With a History of Mild Traumatic Brain Injury.

PubMed

Clark, Alexandra L; Sorg, Scott F; Holiday, Kelsey; Bigler, Erin D; Bangen, Katherine J; Evangelista, Nicole D; Bondi, Mark W; Schiehser, Dawn M; Delano-Wood, Lisa

2018-01-30

Fatigue is a complex, multidimensional phenomenon that commonly occurs following traumatic brain injury (TBI). The thalamus-a structure vulnerable to both primary and secondary injuries in TBI-is thought to play a pivotal role in the manifestation of fatigue. We explored how neuroimaging markers of local and global thalamic morphometry relate to the subjective experience of fatigue post-TBI. Sixty-three Veterans with a history of mild TBI underwent structural magnetic resonance imaging and completed questionnaires related to fatigue and psychiatric symptoms. FMRIB's Software (FSL) was utilized to obtain whole brain and thalamic volume estimates, as well as to perform regional thalamic morphometry analyses. Independent of age, sex, intracranial volume, posttraumatic stress disorder, and depressive symptoms, greater levels of self-reported fatigue were significantly associated with decreased right (P = .026) and left (P = .046) thalamic volumes. Regional morphometry analyses revealed that fatigue was significantly associated with reductions in the anterior and dorsomedial aspects of the right thalamic body (P < .05). Similar trends were observed for the left thalamic body (P < .10). Both global and regional thalamic morphometric changes are associated with the subjective experience of fatigue in Veterans with a history of mild TBI. These findings support a theory in which disruption of thalamocorticostriatal circuitry may result in the manifestation of fatigue in individuals with a history of neurotrauma.

Muscle fatigue effects can be anticipated to reproduce a movement kinematics learned without fatigue.

PubMed

Monjo, Florian; Forestier, Nicolas

2016-12-17

Muscle fatigue modifies the gain between motor command magnitude and the mechanical muscular response. In other words, post-fatigue, central drives to the muscles must increase to maintain a particular submaximum mechanical output. In this study, we tested the hypothesis that this modified gain can be predicted by the central nervous system (CNS) during discrete ballistic movements. In two separate experiments, subjects were required to perform shoulder flexions in standing and sitting positions at submaximum target peak accelerations. They were assisted with visual feedback informing them on their performance after each trial. Shoulder flexions were performed before and after fatiguing protocols of the focal muscles. Acceleration signals, focal and postural muscle electromyograms (EMGs) were recorded. The results demonstrated that participants were able to reach with precision the target acceleration during the first movements post-fatigue at the cost of significant increase in focal motor command magnitude. Decreased variance of peak accelerations associated with increased focal command variability was observed post-fatigue. During the standing experiment, postural muscle EMGs revealed that anticipatory postural adjustments (APAs) scaled to focal movement acceleration post-fatigue. All these results support that fatigue effects are taken into account during movement planning. Indeed, given that no feedback could enable participants to adjust acceleration during movement, this capacity to anticipate fatigue effects is the exclusive result of feedforward processes. To account for this prediction capacity, we discuss the role of fatigue-related modifications in sensory inputs from the working muscles. Copyright © 2016 IBRO. Published by Elsevier Ltd. All rights reserved.

Fatigue in healthy and diseased individuals.

PubMed

Finsterer, Josef; Mahjoub, Sinda Zarrouk

2014-08-01

Although fatigue is experienced by everyone, its definition and classification remains under debate. A review of the previously published data on fatigue. Fatigue is influenced by age, gender, physical condition, type of food, latency to last meal, mental status, psychological conditions, personality type, life experience, and the health status of an individual. Fatigue may not only be a symptom but also a measurable and quantifiable dimension, also known as fatigability. Additionally, it may be classified as a condition occurring at rest or under exercise or stress, as physiologic reaction or pathologic condition, as spontaneous phenomenon or triggerable state, as resistant or irresistant to preconditioning, training, or attitude, as prominent or collateral experience, and as accessible or inaccessible to any type of treatment or intervention. Fatigue may be the sole symptom of a disease or one among others. It may be also classified as acute or chronic. Quantification of fatigability is achievable by fatigue scores, force measurement, electromyography, or other means. Fatigue and fatigability need to be delineated from conditions such as sleepiness, apathy, exhaustion, exercise intolerance, lack of vigor, weakness, inertia, or tiredness. Among neurological disorders, the prevalence of fatigue is particularly increased in multiple sclerosis, amyotrophic lateral sclerosis, Parkinson disease, traumatic brain injury, stroke, and bleeding and also in neuromuscular disorders. Fatigue may be influenced by training, mental preconditioning, or drugs. Fatigue needs to be recognized as an important condition that is not only a symptom but may also be quantified and can be modified by various measures depending on the underlying cause. © The Author(s) 2013.

The Pleistocene evolution of the East Antarctic Ice Sheet in the Prydz bay region: Stable isotopic evidence from ODP Site 1167

USGS Publications Warehouse

Theissen, K.M.; Dunbar, R.B.; Cooper, A. K.; Mucciarone, D.A.; Hoffmann, D.

2003-01-01

Ocean Drilling Program Leg 188, Prydz Bay, East Antarctica is part of a larger initiative to explore the Cenozoic history of the Antarctic Ice Sheet through direct drilling and sampling of the continental margins. In this paper, we present stable isotopic results from Ocean Drilling Program (ODP) Site 1167 located on the Prydz Channel Trough Mouth Fan (TMF), the first Antarctic TMF to be drilled. The foraminifer-based ??18O record is interpreted along with sedimentary and downhole logging evidence to reconstruct the Quaternary glacial history of Prydz Bay and the adjacent Lambert Glacier Amery Ice Shelf System (LGAISS). We report an electron spin resonance age date of 36. 9 ?? 3.3 ka at 0.45 m below sea floor and correlate suspected glacial-interglacial cycles with the global isotopic stratigraphy to improve the chronology for Site 1167. The ??18O record based on planktonic (Neogloboquadrina pachyderma (s.)) and limited benthic results (Globocassidulina crassa), indicates a trend of ice sheet expansion that was interrupted by a period of reduced ice volume and possibly warmer conditions during the early-mid-Pleistocene (0.9-1.38 Ma). An increase in ?? 18O values after ??? 900 ka appears to coincide with the mid-Pleistocene climate transition and the expansion of the northern hemisphere ice sheet. The ??18O record in the upper 50 m of the stratigraphic section indicates as few as three glacial-interglacial cycles, tentatively assigned as marine isotopic stages (MIS) 16-21, are preserved since the Brunhes/Matuyama paleomagnetic reversal (780 ka). This suggests that there is a large unconformity near the top of the section and/or that there may have been few extreme advances of the ice sheet since the mid-Pleistocene climate transition resulting in lowered sedimentation rates on the Prydz Channel TMF. The stable isotopic record from Site 1167 is one of the few available from the area south of the Antarctic Polar Front that has been linked with the global isotopic stratigraphy. Our results suggest the potential for the recovery of useful stable isotopic records in other TMFs. ?? 2003 Elsevier B.V. All rights reserved.

Effect of stimulation intensity and botulinum toxin isoform on rat bladder strip contractions.

PubMed

Smith, Christopher P; Boone, Timothy B; de Groat, William C; Chancellor, Michael B; Somogyi, George T

2003-07-15

The present experiments compared the inhibitory effects of botulinum toxin A (BoNT-A) and botulinum toxin D (BoNT-D) on neurally evoked contractions of rat bladder strips. We examined the effect of fatigue (trains of 100 shocks at 20Hz every 20s for 10min) followed by non-fatigue stimulation (trains of 100 shocks at 20Hz every 100s for 20min) on the onset of effect and potency of the two toxins. For non-fatigue experiments, strips were untreated (n=4); or incubated with 1.36nM BoNT-A (n=4). During fatigue experiments, strips were untreated (n=5); or treated with either 1.36nM BoNT-A (n=6) or 0.8nM BoNT-D (n=6). In non-fatigue experiments, BoNT-A produced significant decreases in contractile area after 1h of stimulation compared to untreated strips (P<0.05). After three series of fatigue stimulation, differences in recovery amplitude and area between untreated versus BoNT-A, and untreated versus BoNT-D bladder strips, were statistically significant (P<0.05). The onset of inhibitory effect was quicker in BoNT-D-treated strips, as a significant reduction (P<0.05) in recovery of contractile area was observed after 1h of stimulation compared to both untreated and BoNT-A-treated preparations. In addition, treated (BoNT-A and BoNT-D) and untreated bladder strips responded similarly to atropine, suggesting that the effects of BoNT result from inhibition of both acetylcholine and ATP release. Our results demonstrate that BoNT-D may be a more effective agent to inhibit transmitter release from autonomic nerves of the rat lower urinary tract. Moreover, in our hands, non-fatigue stimulation is as effective as fatigue stimulation in inhibiting bladder strip contractions.

Compassion Fatigue and School Personnel: Remaining Open to the Affective Needs of Students.

ERIC Educational Resources Information Center

Kees, Nathalie L.; Lashwood, Patricia A.

1996-01-01

Compassion fatigue, or secondary traumatic stress response, describes the reaction of counselors, teachers, and others who work with trauma survivors. They may experience stress or restimulation of their own traumatic experiences. Cognitive and behavioral techniques focused on prevention and intervention can help them cope. (SK)

Compelled to Act: The Negotiation of Compassion Fatigue among Student Affairs Professionals

ERIC Educational Resources Information Center

Stoves, Douglas R.

2014-01-01

The purpose of the qualitative study was to identify the ways in which Student Affairs professionals in higher education in South Texas experienced and negotiated compassion fatigue through their everyday responsibilities. Research questions explored the development and experience of, and coping with, compassion fatigue. Grounded in Constructivist…

Systematic Review and Meta-analysis of the Effects of Caffeine in Fatigued Shift Workers: Implications for Emergency Medical Services Personnel

DOT National Transportation Integrated Search

2018-01-11

Background: Emergency Medical Services (EMS) workers may experience fatigue as a consequence of shift work. We reviewed the literature to determine the impact of caffeine as a countermeasure to fatigue in EMS personnel and related shift workers. Meth...

Multidimensional daily diary of fatigue-fibromyalgia-17 items (MDF-fibro-17). part 1: development and content validity.

PubMed

Morris, S; Li, Y; Smith, J A M; Dube', S; Burbridge, C; Symonds, T

2017-05-16

Fibromyalgia (FM), a disorder characterized by chronic widespread pain and tenderness, affects greater than five million individuals in the United States alone. Patients experience multiple symptoms in addition to pain, and among them, fatigue is one of the most bothersome and disabling. There is a growing body of literature suggesting that fatigue is a multidimensional concept. Currently, to our knowledge, no multidimensional Patient Reported Outcome (PRO) measure of FM-related fatigue meets Food and Drug Administration (FDA) requirements to support a product label claim. Therefore, the objective of this research was to evaluate qualitative and quantitative data previously gathered to inform the development of a comprehensive, multidimensional, PRO measure to assess FM-related fatigue in FM clinical trials. Existing qualitative and quantitative data from three previously conducted studies in patients with FM were reviewed to inform the initial development of a multidimensional PRO measure of FM-related fatigue: 1) a concept elicitation study involving in-depth, open-ended interviews with patients with FM in the United States (US) (N = 20), Germany (N = 10), and France (N = 10); 2) a cognitive debriefing and pilot study of a preliminary pool of 23 items (N = 20 US patients with FM); and 3) a methodology study that explored initial psychometrics of the item pool (N = 145 US patients with FM). Five domains were identified that intend to capture the broad experience of FM-related fatigue reported in the qualitative research: the Global Fatigue Experience, Cognitive Fatigue, Physical Fatigue, Motivation, and Impact on Function. Seventeen of the original pool of 23 items were selected to best capture these five dimensions. These 17 items formed the basis of a newly developed multidimensional PRO measure to assess FM-related fatigue in clinical trials: the Multidimensional Daily Diary of Fatigue-Fibromyalgia-17 (MDF-Fibro-17). Qualitative analysis, and preliminary quantitative item level data, confirmed that FM-related fatigue is multidimensional and provided strong support for the content validity of the MDF-Fibro-17. The next stage was to quantitatively evaluate the measure to confirm the factor structure, psychometric properties, sensitivity to change, and meaningful change. This has been conducted and is being reported separately.

Experiences with, perceptions of and attitudes towards traditional Korean medicine (TKM) in patients with chronic fatigue: a qualitative, one-on-one, in-depth interview study.

PubMed

Son, Haeng-Mi; Park, Eun Young; Kim, Duck Hee; Kim, Eunjeong; Shin, Mi-Suk; Kim, Tae-Hun

2015-09-08

To explore perceptions and experiences of patients with chronic fatigue with traditional Korean medicine (TKM) and their motivation for choosing TKM. Qualitative, one-on-one, in-depth interview study. Primary TKM hospitals in Seoul, Incheon and Daejeon, South Korea. 15 patients with chronic fatigue were interviewed in this study. Patients with chronic fatigue experienced physical and psychological symptoms that resulted in severe difficulties associated with routine daily activities. The motivations for choosing TKM were primarily dissatisfaction with conventional medicine and previous positive experiences with TKM. While undergoing TKM treatment, patients found that TKM practitioners considered fatigue to be a treatable illness; also, patients felt comfortable with the doctor-patient relationship in TKM. Healthcare providers need to be concerned about the symptoms of chronic fatigue to a degree that is in line with the patient's own perceptions. Korean patients with chronic fatigue choose TKM as an alternative to fulfil their long-term needs that were unmet by conventional medicine, and they are greatly positively influenced by TKM. TKM may present a possible therapy to alleviate symptoms of diseases that conventional medicine does not address and is an approach that has a considerable effect on Korean patients. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Are stamina and fatigue polar opposites? A case study.

PubMed

So, Suzanna; Evans, Meredyth; Jason, Leonard A; Brown, Abigail

2015-01-01

Most individuals with Myalgic Encephalomyelitis/chronic fatigue syndrome (ME/CFS) (Carruthers et al., 2003 ), Myalgic Encephalomyelitis (ME) (Carruthers et al., 2011 ), and chronic fatigue syndrome (CFS) (Fukuda et al., 1994 ) indicate that they experience fatigue and sharp decreases in energy levels, which hinder the ability to engage in physical activities (Friedberg & Jason, 1998 ). However, there are some individuals who reduce activity engagement in order to avoid a worsening of symptoms; thus these individuals may endorse lower levels of fatigue. Accordingly, those with low levels of fatigue but low endurance/stamina might be inadvertently excluded from some criteria based on the fatigue requirement. The current study serves as an exploration of the relationship between fatigue and stamina and the effects of these constructs on illness symptomology and their implications for assessment and diagnosis.

Are Stamina and Fatigue Polar Opposites? A Case Study

PubMed Central

So, Suzanna; Evans, Meredyth; Jason, Leonard A.; Brown, Abigail

2014-01-01

Most individuals with Myalgic Encephalomyelitis/chronic fatigue syndrome (ME/CFS) (Carruthers et al., 2003), Myalgic Encephalomyelitis (ME) (Carruthers et al., 2011), and chronic fatigue syndrome (CFS) (Fukuda et al., 1994) indicate that they experience fatigue and sharp decreases in energy levels, which hinder the ability to engage in physical activities (Friedberg & Jason, 1998). However, there are some individuals who reduce activity engagement in order to avoid a worsening of symptoms; thus these individuals may endorse lower levels of fatigue. Accordingly, those with low levels of fatigue but low endurance/stamina might be inadvertently excluded from some criteria based on the fatigue requirement. The current study serves as an exploration of the relationship between fatigue and stamina and the effects of these constructs on illness symptomology and their implications for assessment and diagnosis. PMID:25584526

Patterns of Morning and Evening Fatigue Among Adults with HIV/AIDS

PubMed Central

Lerdal, Anners; Gay, Caryl L.; Aouizerat, Bradley E.; Portillo, Carmen J.; Lee, Kathryn A.

2011-01-01

Aims and objectives Describe patterns of morning and evening fatigue in adults with HIV and examine their relationship to demographic and clinical factors and other symptoms. Background Most studies of HIV-related fatigue assess average levels of fatigue and do not address its diurnal fluctuations. Patterns of fatigue over the course of the day may have important implications for assessment and treatment. Design A cross-sectional, correlational design was used with six repeated measures over 72 hours. Method A convenience sample of 318 HIV-infected adults was recruited in San Francisco. Socio-demographic, clinical and symptom data were collected with questionnaires. CD4+ T-cell count and viral load were obtained from medical records. Participants completed a four-item version of the Lee Fatigue Scale each morning and evening for three consecutive days. Participants were grouped based on their diurnal pattern of fatigue (high evening only, high morning only, high morning and evening and low morning and evening). Group comparisons and logistic regression were used to determine the unique predictors of each fatigue pattern. Results The high evening fatigue pattern was associated with anxiety and the high morning pattern was associated with anxiety and depression. The morning fatigue pattern showed very little fluctuation between morning and evening, the evening pattern showed the largest fluctuation. The high morning and evening pattern was associated with anxiety, depression and sleep disturbance and this group reported the most fatigue-related distress and interference in functioning. Conclusions These results provide initial evidence for the importance of assessing the patient’s daily pattern of fatigue fluctuation, as different patterns were associated with different symptom experiences and perhaps different etiologies. Relevance to clinical practice Different fatigue patterns may benefit from tailored intervention strategies. Management of depressive symptoms could be tested in patients who experience high levels of morning fatigue. PMID:21752119

Comparison on driving fatigue related hemodynamics activated by auditory and visual stimulus

NASA Astrophysics Data System (ADS)

Deng, Zishan; Gao, Yuan; Li, Ting

2018-02-01

As one of the main causes of traffic accidents, driving fatigue deserves researchers' attention and its detection and monitoring during long-term driving require a new technique to realize. Since functional near-infrared spectroscopy (fNIRS) can be applied to detect cerebral hemodynamic responses, we can promisingly expect its application in fatigue level detection. Here, we performed three different kinds of experiments on a driver and recorded his cerebral hemodynamic responses when driving for long hours utilizing our device based on fNIRS. Each experiment lasted for 7 hours and one of the three specific experimental tests, detecting the driver's response to sounds, traffic lights and direction signs respectively, was done every hour. The results showed that visual stimulus was easier to cause fatigue compared with auditory stimulus and visual stimulus induced by traffic lights scenes was easier to cause fatigue compared with visual stimulus induced by direction signs in the first few hours. We also found that fatigue related hemodynamics caused by auditory stimulus increased fastest, then traffic lights scenes, and direction signs scenes slowest. Our study successfully compared audio, visual color, and visual character stimulus in sensitivity to cause driving fatigue, which is meaningful for driving safety management.

A Constitutive Relationship between Fatigue Limit and Microstructure in Nanostructured Bainitic Steels

PubMed Central

Mueller, Inga; Rementeria, Rosalia; Caballero, Francisca G.; Kuntz, Matthias; Sourmail, Thomas; Kerscher, Eberhard

2016-01-01

The recently developed nanobainitic steels show high strength as well as high ductility. Although this combination seems to be promising for fatigue design, fatigue properties of nanostructured bainitic steels are often surprisingly low. To improve the fatigue behavior, an understanding of the correlation between the nanobainitic microstructure and the fatigue limit is fundamental. Therefore, our hypothesis to predict the fatigue limit was that the main function of the microstructure is not necessarily totally avoiding the initiation of a fatigue crack, but the microstructure has to increase the ability to decelerate or to stop a growing fatigue crack. Thus, the key to understanding the fatigue behavior of nanostructured bainite is to understand the role of the microstructural features that could act as barriers for growing fatigue cracks. To prove this hypothesis, we carried out fatigue tests, crack growth experiments, and correlated these results to the size of microstructural features gained from microstructural analysis by light optical microscope and EBSD-measurements. Finally, we were able to identify microstructural features that influence the fatigue crack growth and the fatigue limit of nanostructured bainitic steels. PMID:28773953

It's a Hard-Knock Life: Game Load, Fatigue, and Injury Risk in the National Basketball Association.

PubMed

Lewis, Melanie

2018-05-17

  National Basketball Association (NBA) athletes experience a high rate of injuries. Injury prevention requires identifying observable and controllable risk factors.   To examine the relationship among game load, fatigue, and injuries in NBA athletes.   Cross-sectional study.   Game statistics and injury reports over 3 NBA seasons (2012-2015).   Data represented 627 players (height = 200.7 ± 8.9 cm, mass = 100.6 ± 12.1 kg, NBA experience = 4.8 ± 4.2 years, pre-NBA experience = 3.2 ± 1.9 years), 73 209 games, and 1663 injury events.   An injury event was defined as a player missing or leaving a game due to injury. Logistic multilevel regression was used to predict injuries from time-lagged fatigue and game load with between-subjects differences explained by demographic variables.   The odds of injury increased by 2.87% ( P < .001) for each 96 minutes played and decreased by 15.96% ( P < .001) for each day of rest. Increases in game load increased injury odds by 8.23% ( P < .001) for every additional 3 rebounds and 9.87% ( P < .001) for every additional 3 field-goal attempts. When fatigue and game load were held constant, injury odds increased by 3.03% ( P = .04) for each year of NBA experience and 10.59% ( P = .02) for a 6-cm decrease in height. I observed variability in the intercepts ( P < .001) and the slopes for minutes, rest, field goal attempts, and rebounds (all P < .001).   Injuries were associated with greater fatigue and game load, more years of NBA experience, and being shorter than average. Both baseline injury risk and the magnitude of the load-injury and fatigue-injury associations varied across individuals. Researchers should explore the nature of these relationships.

Fatigue Lifespan of Engine Box Influenced by Fan Blade Out

NASA Astrophysics Data System (ADS)

Qiu, Ju; Shi, Jingwei; Su, Huaizhong; Zhang, Jinling; Feng, Juan; Shi, Qian; Tian, Xiaoyu

2017-11-01

This provides precious experience and reliable reference data for future design. This paper introduces the analysis process of Fan-blade-out, and considers the effect of windmill load on the fatigue lifespan of the case. According to Extended Operations (ETOPS) in the airworthiness regulations, the fatigue crack of it is analyzed by the unbalanced rotor load, during FBO. Compared with the lifespan in normal work of the engine, this research provides valuable design experience and reliable reference data for the case design in the near future.

Microstructure-sensitive plasticity and fatigue modeling of extruded 6061 aluminum alloys

NASA Astrophysics Data System (ADS)

McCullough, Robert Ross

In this study, the development of fatigue failure and stress anisotropy in light weight ductile metal alloys, specifically Al-Mg-Si aluminum alloys, was investigated. The experiments were carried out on an extruded 6061 aluminum alloy. Reverse loading experiments were performed up to a prestrain of 5% in both tension-followed-by-compression and compression-followed-by-tension. The development of isotropic and kinematic hardening and subsequent anisotropy was indicated by the observation of the Bauschinger effect phenomenon. Experimental results show that 6061 aluminum alloy exhibited a slight increase in the kinematic hardening versus applied prestrain. However, the ratio of kinematic-to-isotropic hardening remained near unity. An internal state variable (ISV) plasticity and damage model was used to capture the evolution of the anisotropy for the as-received T6 and partially annealed conditions. Following the stress anisotropy experiments, the same extruded 6061 aluminum alloy was tested under fully reversing, strain-controlled low cycle fatigue at up to 2.5% strain amplitudes and two heat treatment conditions. Observations were made of the development of striation fields up to the point of nucleation at cracked and clustered precipitants and free surfaces through localized precipitant slip band development. A finite element enabled micro-mechanics study of fatigue damage development of local strain field in the presence of hard phases was conducted. Both the FEA and experimental data sets were utilized in the implementation of a multi-stage fatigue model in order to predict the microstructure response, including fatigue nucleation and propagation contributions on the total fatigue life in AA6061. Good correlation between experimental and predicted results in the number of cycles to final failure was observed. The AA6061 material maintained relatively consistent low cycle fatigue performance despite two different heat treatments.

Conducting High Cycle Fatigue Strength Step Tests on Gamma TiAl

NASA Technical Reports Server (NTRS)

Lerch, Brad; Draper, Sue; Pereira, J. Mike

2002-01-01

High cycle fatigue strength testing of gamma TiAl by the step test method is investigated. A design of experiments was implemented to determine if the coaxing effect occurred during testing. Since coaxing was not observed, step testing was deemed a suitable method to define the fatigue strength at 106 cycles.

Is Lactate Production Related to Muscular Fatigue? A Pedagogical Proposition Using Empirical Facts

ERIC Educational Resources Information Center

Vaz Macedo, Denise; Lazarim, Fernanda Lorenzi; da Silva, Fernando Oliveira Catanho; Tessuti, Lucas Samuel; Hohl, Rodrigo

2009-01-01

The cause-effect relationship between lactic acid, acidosis, and muscle fatigue has been established in the literature. However, current experiments contradict this premise. Here, we describe an experiment developed by first-year university students planned to answer the following questions: 1) Which metabolic pathways of energy metabolism are…

German experiences in local fatigue monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abib, E.; Bergholz, S.; Rudolph, J.

The ageing management of nuclear power plants (NPP) has gained an increasing importance in the last years. The reasons are mainly due to the international context of extending period of plants operation. Moreover, new scientific discoveries, such as the corrosive influence of the medium on the fatigue process (environmentally assisted fatigue - EAF) play an important role and influence the code development (ASME, EAF code cases). The fatigue damage process takes a central position in ageing mechanisms of components. It must be ensured through appropriate evidence that facilities are being operated under allowable boundary conditions. In the design phase ofmore » NPP, fatigue analyses are still based on theoretical considerations and empirical values, which are summarized in the design transient catalogue, necessary for licensing. These analyses aim at proving the admissibility of the loads in terms of stress and fatigue usage. These analyses will also provide the fatigue-relevant positions in the NPP and give a basis for future design improvements and optimization of operating modes. The design transients are in practice conservatively correlated with the real transients occurring during operation. Uncertainties reveal very conservative assumptions regarding forecast temperatures, temperature gradients and frequencies of events. During operation of the plant, it has to be recurrently proved, that the plant is being operated under designed boundary conditions. Moreover, operating signals are constantly acquired to enable a fatigue evaluation. For example, in Germany fatigue evaluation is based on decades of experience and regulatory requirements. The rule KTA 3201.4 [1] establishes the rules for qualified fatigue monitoring. The rule DIN 25475-3 [2] on fatigue monitoring systems is available in draft version. Experience shows that some significant differences occur between the design transients and the real occurred transients during plant operation. The reasons for it are the various manual control options and also different operating modes. It is clear that showing the covering of real loads by design loads, requires a relatively complex and well-qualified detection process. The difficulty of this task is increased due to the lack of data or incomplete information and the exclusive reliance on existing operation plant data. The strategy of employing local fatigue monitoring is a straightforward solution enabling the direct measurement of loads on the fatigue-sensitive zones. Nowadays a direct derivation of the complete stress tensor at the fatigue-relevant locations is enabled thanks to the recorded local loads and combination with finite element (FE) analyses. So, additionally to the recorded temperature curves, a representation of the time evolution of the six stress components for each monitored component is possible. This allows the application of the simplified elasto-plastic fatigue check according to design codes. The fatigue level can be realistically analyzed with a suitable cycle-counting method. Furthermore, the knowledge of the time evolution of the stresses and strains enables to take into account an environmental factor to include the corrosive fluid influence in the calculations. Without local recording, it is impossible to calculate realistic fatigue usage. AREVA offers the AREVA fatigue concept (AFC) and the new fatigue monitoring system integrated (FAMOSi), necessary tools to monitor local fatigue and to provide realistic assessment. (authors)« less

The Influence of Roughness on Gear Surface Fatigue

NASA Technical Reports Server (NTRS)

Krantz, Timothy

2005-01-01

Gear working surfaces are subjected to repeated rolling and sliding contacts, and often designs require loads sufficient to cause eventual fatigue of the surface. This research provides experimental data and analytical tools to further the understanding of the causal relationship of gear surface roughness to surface fatigue. The research included evaluations and developments of statistical tools for gear fatigue data, experimental evaluation of the surface fatigue lives of superfinished gears with a near-mirror quality, and evaluations of the experiments by analytical methods and surface inspections. Alternative statistical methods were evaluated using Monte Carlo studies leading to a final recommendation to describe gear fatigue data using a Weibull distribution, maximum likelihood estimates of shape and scale parameters, and a presumed zero-valued location parameter. A new method was developed for comparing two datasets by extending the current methods of likelihood-ratio based statistics. The surface fatigue lives of superfinished gears were evaluated by carefully controlled experiments, and it is shown conclusively that superfinishing of gears can provide for significantly greater lives relative to ground gears. The measured life improvement was approximately a factor of five. To assist with application of this finding to products, the experimental condition was evaluated. The fatigue life results were expressed in terms of specific film thickness and shown to be consistent with bearing data. Elastohydrodynamic and stress analyses were completed to relate the stress condition to fatigue. Smooth-surface models do not adequately explain the improved fatigue lives. Based on analyses using a rough surface model, it is concluded that the improved fatigue lives of superfinished gears is due to a reduced rate of near-surface micropitting fatigue processes, not due to any reduced rate of spalling (sub-surface) fatigue processes. To complete the evaluations, surface inspection were completed. The surface topographies of the ground gears changed substantially due to running, but the topographies of the superfinished gears were essentially unchanged with running.

The Neural Mechanisms Underlying the Decision to Rest in the Presence of Fatigue: A Magnetoencephalography Study

PubMed Central

Ishii, Akira; Tanaka, Masaaki; Watanabe, Yasuyoshi

2014-01-01

Adequate rest is essential to avoid fatigue and disruption of homeostasis. However, the neural mechanisms underlying the decision to rest are not well understood. In the present study, we aimed to clarify the neural mechanisms of this decision-making process using magnetoencephalography. Fifteen healthy volunteers participated in decision and control experiments performed in a cross-over fashion. In the decision experiment, participants performed 1,200 reverse Stroop test trials and were intermittently asked to decide whether they wanted to take a rest or continue. In the control experiments, participants performed 1,200 reverse Stroop test trials and were instructed to press a response button intermittently without making any decision. Changes in oscillatory brain activity were assessed using a narrow-band adaptive spatial filtering method. The levels of decrease in theta (4–8 Hz) band power in left Brodmann's area (BA) 31, alpha (8–13 Hz) band power in left BA 10 and BA 9, and beta (13–25 Hz) band power in right BA 46 and left BA 10 were greater in trials when the participant opted to rest (rest trials) than those in control trials. The decrease in theta band power in BA 31 in the rest trials was positively correlated with the subjective level of fatigue after the decision experiment. These results demonstrated that the dorsolateral prefrontal cortex, frontal pole, and posterior cingulate cortex play a role in the decision to rest in the presence of fatigue. These findings may help clarify the neural mechanisms underlying fatigue and fatigue-related problems. PMID:25303465

In-air and pressurized water reactor environment fatigue experiments of 316 stainless steel to study the effect of environment on cyclic hardening

NASA Astrophysics Data System (ADS)

Mohanty, Subhasish; Soppet, William K.; Majumdar, Saurindranath; Natesan, Krishnamurti

2016-05-01

Argonne National Laboratory (ANL), under the sponsorship of Department of Energy's Light Water Reactor Sustainability (LWRS) program, is trying to develop a mechanistic approach for more accurate life estimation of LWR components. In this context, ANL has conducted many fatigue experiments under different test and environment conditions on type 316 stainless steel (316 SS) material which is widely used in the US reactors. Contrary to the conventional S ∼ N curve based empirical fatigue life estimation approach, the aim of the present DOE sponsored work is to develop an understanding of the material ageing issues more mechanistically (e.g. time dependent hardening and softening) under different test and environmental conditions. Better mechanistic understanding will help develop computer-based advanced modeling tools to better extrapolate stress-strain evolution of reactor components under multi-axial stress states and hence help predict their fatigue life more accurately. Mechanics-based modeling of fatigue such as by using finite element (FE) tools requires the time/cycle dependent material hardening properties. Presently such time-dependent material hardening properties are hardly available in fatigue modeling literature even under in-air conditions. Getting those material properties under PWR environment, are even harder. Through this work we made preliminary attempt to generate time/cycle dependent stress-strain data both under in-air and PWR water conditions for further study such as for possible development of material models and constitutive relations for FE model implementation. Although, there are open-ended possibility to further improve the discussed test methods and related material estimation techniques we anticipate that the data presented in this paper will help the metal fatigue research community particularly, the researchers who are dealing with mechanistic modeling of metal fatigue such as using FE tools. In this paper the fatigue experiments under different test and environment conditions and related stress-strain results for 316 SS are discussed.

In-air and pressurized water reactor environment fatigue experiments of 316 stainless steel to study the effect of environment on cyclic hardening

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohanty, Subhasish; Soppet, William K.; Majumdar, Saurindranath

Argonne National Laboratory (ANL), under the sponsorship of Department of Energy’s Light Water Reactor Sustainability (LWRS) program, is trying to develop a mechanistic approach for more accurate life estimation of LWR components. In this context, ANL has conducted many fatigue experiments under different test and environment conditions on type 316 stainless steel (316SS) material which is widely used in the US reactors. Contrary to the conventional S~N curve based empirical fatigue life estimation approach, the aim of the present DOE sponsored work is to develop an understanding of the material ageing issues more mechanistically (e.g. time dependent hardening and softening)more » under different test and environmental conditions. Better mechanistic understanding will help develop computer-based advanced modeling tools to better extrapolate stress-strain evolution of reactor components under multi-axial stress states and hence help predict their fatigue life more accurately. In this paper (part-I) the fatigue experiments under different test and environment conditions and related stress-strain results for 316 SS are discussed. In a second paper (part-II) the related evolutionary cyclic plasticity material modeling techniques and results are discussed.« less

Attachment and compassion fatigue among American and Israeli mental health clinicians working with traumatized victims of terrorism.

PubMed

Racanelli, Christine

2005-01-01

This study compared the construct of compassion fatigue with the role of attachment as a potential mediator among mental health clinicians working with victims of terrorism in the New York metropolitan region of the United States and Israel. Differences between clinicians practicing within Israel (n = 31) and New York (n = 35), in terms of their symptoms of compassion fatigue, compassion satisfaction, and "burnout," were not significant, as measured by multivariate analyses of variance. Based upon nonsignificant differences, mediational statistical tests could not be run; thus, mediation did not hold. The data failed to support a significant difference between compassion fatigue and attachment avoidance or anxiety. However, data collection resulted in attenuated scores for compassion fatigue and compassion satisfaction within both study groups of clinicians and moderate to average scores for burnout. Israeli clinicians had significantly more avoidant attachment dimensions than their New York cohorts. The strongest predictors of compassion satisfaction were (a) low attachment anxiety and (b) sufficient clinical experience related to treating victims of trauma. The strongest predictors of burnout were (a) minimal clinical experience, (b) minimal experience working with trauma victims, and (c) greater avoidant attachment dimensions.

The Housing Domain of Quality of Life and Life Satisfaction in the Spontaneous Settlements on the Tehran Metropolitan Fringe

ERIC Educational Resources Information Center

Zebardast, Esfandiar

2009-01-01

The aim of this article is to survey the spontaneous settlements on the Tehran Metropolitan Fringe (TMF), to determine the different housing sub-domains of quality of life (QOL), to survey overall life satisfaction and to determine the extent to which overall life satisfaction is explained by the components of the housing domain of QOL in these…

Biomagnification of persistent organic pollutants in a deep-sea, temperate food web.

PubMed

Romero-Romero, Sonia; Herrero, Laura; Fernández, Mario; Gómara, Belén; Acuña, José Luis

2017-12-15

Polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and polychlorinated dibenzo-p-dioxins and -furans (PCDD/Fs) were measured in a temperate, deep-sea ecosystem, the Avilés submarine Canyon (AC; Cantabrian Sea, Southern Bay of Biscay). There was an increase of contaminant concentration with the trophic level of the organisms, as calculated from stable nitrogen isotope data (δ 15 N). Such biomagnification was only significant for the pelagic food web and its magnitude was highly dependent on the type of top predators included in the analysis. The trophic magnification factor (TMF) for PCB-153 in the pelagic food web (spanning four trophic levels) was 6.2 or 2.2, depending on whether homeotherm top predators (cetaceans and seabirds) were included or not in the analysis, respectively. Since body size is significantly correlated with δ 15 N, it can be used as a proxy to estimate trophic magnification, what can potentially lead to a simple and convenient method to calculate the TMF. In spite of their lower biomagnification, deep-sea fishes showed higher concentrations than their shallower counterparts, although those differences were not significant. In summary, the AC fauna exhibits contaminant levels comparable or lower than those reported in other systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Modeling variable density turbulence in the wake of an air-entraining transom stern

NASA Astrophysics Data System (ADS)

Hendrickson, Kelli; Yue, Dick

2015-11-01

This work presents a priori testing of closure models for the incompressible highly-variable density turbulent (IHVDT) flows in the near wake region of a transom stern. This three-dimensional flow is comprised of convergent corner waves that originate from the body and collide on the ship center plane forming the ``rooster tail'' that then widens to form the divergent wave train. These violent free-surface flows and breaking waves are characterized by significant turbulent mass flux (TMF) at Atwood number At = (ρ2 -ρ1) / (ρ2 +ρ1) ~ 1 for which there is little guidance in turbulence closure modeling for the momentum and scalar transport along the wake. To whit, this work utilizes high-resolution simulations of the near wake of a canonical three-dimensional transom stern using conservative Volume-of-Fluid (cVOF), implicit Large Eddy Simulation (iLES), and Boundary Data Immersion Method (BDIM) to capture the turbulence and large scale air entrainment. Analysis of the simulation results across and along the wake for the TMF budget and turbulent anisotropy provide the physical basis of the development of multiphase turbulence closure models. Performance of isotropic and anisotropic turbulent mass flux closure models will be presented. Sponsored by the Office of Naval Research.

Trophic Magnification of Parabens and Their Metabolites in a Subtropical Marine Food Web.

PubMed

Xue, Xiaohong; Xue, Jingchuan; Liu, Wenbin; Adams, Douglas H; Kannan, Kurunthachalam

2017-01-17

Despite the widespread use of parabens in a range of consumer products, little is known about bioaccumulation of these chemicals in aquatic environments. In this study, six parabens and four of their common metabolites were measured in abiotic (water, sediment) and biotic (fish including sharks, invertebrates, plants) samples collected from a subtropical marine food web in coastal Florida. Methyl paraben (MeP) was found in all abiotic (100%) and a majority of biotic (87%) samples. 4-Hydroxy benzoic acid (4-HB) was the most abundant metabolite, found in 97% of biotic and all abiotic samples analyzed. The food chain accumulation of MeP and 4-HB was investigated for this food web. The trophic magnification factor (TMF) of MeP was estimated to be 1.83, which suggests considerable bioaccumulation and biomagnification of this compound in the marine food web. In contrast, a low TMF value was found for 4-HB (0.30), indicating that this compound is metabolized and excreted along the food web. This is the first study to document the widespread occurrence of parabens and their metabolites in fish, invertebrates, seagrasses, marine macroalgae, mangroves, seawater, and ocean sediments and to elucidate biomagnification potential of MeP in a marine food web.

Bioaccumulation and trophic transfer of short chain chlorinated paraffins in a marine food web from Liaodong Bay, North China.

PubMed

Ma, Xindong; Zhang, Haijun; Wang, Zhen; Yao, Ziwei; Chen, Jingwen; Chen, Jiping

2014-05-20

Short chain chlorinated paraffins (SCCPs) are under the evaluation for inclusion into the Stockholm Convention on persistent organic pollutants. However, information on their bioconcentration and biomagnification in marine ecosystems is unavailable, limiting the evaluation of their ecological risks. In this study, seawater, sediment, zooplankton, invertebrates, and fishes collected from Liaodong Bay, Bohai Sea, North China were analyzed to investigate the residual level, congener group profile, bioaccumulation, and trophic transfer of SCCPs in a marine food web. The total concentrations of SCCPs ranged from 4.1 to 13.1 ng L(-1) in seawater, 65 to 541 ng g(-1) (dw) in sediment, and 86 to 4400 ng g(-1) (ww) in organisms. Correspondence analysis indicated the relative enrichment of C10Cl5 and C11Cl5 formula groups in most aquatic organisms. Both the logarithm bioaccumulation factors (log BAFs: 4.1-6.7) and biota-sediment accumulation factors (BSAFs: 0.1-7.3) of individual congeners implied the bioaccumulation of SCCPs. The trophic magnification factor (TMF) of ∑SCCPs was determined to be 2.38 in the zooplankton-shrimp-fish food web, indicating biomagnification potential of SCCPs in the marine ecosystem. The TMF values of individual congener groups significantly correlated with their log KOW values.

Using Wii Fit to reduce fatigue among African American women with systemic lupus erythematosus: a pilot study.

PubMed

Yuen, H K; Holthaus, K; Kamen, D L; Sword, D O; Breland, H L

2011-10-01

Fatigue and physical deconditioning are common, difficult to treat conditions among patients with systemic lupus erythematosus (SLE). The aim of this pilot study was to evaluate the effectiveness of a home-based exercise program using the Wii Fit system in patients with SLE. Fifteen sedentary African American women with SLE experiencing moderate to severe fatigue participated in a home exercise program using the Wii Fit 3 days a week for 30 minutes each for 10 weeks. A one-group pretest-post test design was used to evaluate the effectiveness of this program. Primary outcome measure was severity of fatigue. Secondary outcome measures were body weight, waist circumference, fatigue-related symptoms of distress, activity level, and physical fitness. At the completion of the 10-week Wii Fit exercise program, participants perceived fatigue severity as measured by the Fatigue Severity Scale to be significantly decreased (p = 0.002), and body weight and waist circumference were significantly reduced (p = 0.01). In addition, anxiety level, as measured by Hospital Anxiety and Depression Scale, and overall intensity of total pain experience, as measured by Short-form of the McGill Pain Questionnaire, were also significantly reduced (p < 0.05). Findings provide preliminary evidence that the Wii Fit motivates this population to exercise, which leads to alleviation of fatigue and reduced body weight, waist circumference, anxiety level, and overall intensity of total pain experience.

[The effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis].

PubMed

Lee, Young-Mee; Sohng, Kyeong-Yae

2005-12-01

The purpose of this study was to determine the effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis. This study was a quasi-experimental study of pre-test and post-test design in a non-equivalent control group. The subjects of this study consisted of both the experimental group of twenty-nine and the control group of thirty coal workers' pneumoconiosis patients. Data was collected from December 10, 2002 to February 15, 2003. Foot reflexology was performed for 60 minutes twice a week through five weeks in the experimental group, but none in the control group. To evaluate the effects of foot reflexology, the scores of fatigue and insomnia were measured before and after the experiment in both groups. Fatigue was evaluated by Fatigue Symptoms Inventory. Insomnia was measured with the visual analogue scale (VAS). Data of this experiment was analyzed by Chi-square test, t-test, unpaired t-test and Repeated Measures ANOVA with the SAS Program. The scores of fatigue and insomnia decreased in the experimental group but not in the control group. There was a significant difference of fatigue and insomnia between the two groups. It is suggested that foot reflexology might have beneficial effects on reducing fatigue and insomnia in patients suffering from coal workers' pneumoconiosis, and can be recommended as a nursing intervention program for patients with coal workers' pneumoconiosis.

Using Wii Fit to reduce fatigue among African American women with systemic lupus erythematosus: A pilot study

PubMed Central

Yuen, Hon K.; Holthaus, Katy; Kamen, Diane L.; Sword, David; Breland, Hazel L.

2012-01-01

Fatigue and physical deconditioning are common, difficult to treat conditions among patients with systemic lupus erythematosus (SLE). The aim of this pilot study is to evaluate the effectiveness of a home-based exercise program using the Wii Fit system in patients with SLE. Fifteen sedentary African American women with SLE experiencing moderate to severe fatigue participated in a home exercise program using the Wii Fit 3 days a week for 30 minutes each for 10 weeks. A one-group pretest-posttest design was used to evaluate the effectiveness of this program. Primary outcome measure was severity of fatigue. Secondary outcome measures were body weight, waist circumference, fatigue-related symptoms of distress, activity level and physical fitness. At the completion of the 10-week Wii Fit exercise program, participants perceived fatigue severity as measured by the Fatigue Severity Scale to be significantly decreased (P=0.002), body weight and waist circumference were significantly reduced (Ps=0.01). In addition, anxiety level as measured by Hospital Anxiety and Depression Scale, and overall intensity of total pain experience as measured by Short-form of the McGill Pain Questionnaire were also significantly reduced (Ps<0.05). Findings provide preliminary support that the Wii Fit motivates this population to exercise which leads to alleviation of fatigue and reduced body weight, waist circumference, anxiety level, and overall intensity of total pain experience. PMID:21700656

Subacromial impingement syndrome: An electromyographic study of shoulder girdle muscle fatigue.

PubMed

Alizadehkhaiyat, Omid; Roebuck, Margaret M; Makki, Ahmed T; Frostick, Simon P

2018-02-01

Muscle fatigue affecting glenohumeral and/or scapular muscles is suggested as one of the contributing factors to the development of subacromial impingement syndrome (SAIS). Nonetheless, the fatigability of shoulder girdle muscles in association with the pathomechanics of SAIS has not been reported. This study aimed to measure and compare fatigue progression within the shoulder girdle musculature of patients and healthy controls. 75 participants including 39 patients (20 females; 19 males) and 36 healthy controls (15 females; 21 males) participated in the study. Study evaluated the progression of muscle fatigue in 15 shoulder girdle muscles by means of surface and fine-wire EMG during submaximal contraction of four distinct movements (abduction, flexion, internal and external rotation). Shoulder strength, subjective pain experience (McGill Pain Questionnaire), and psychological status (Hospital Anxiety and Depression Scale) were also assessed. The results were compared between patient and control groups according to the gender. Despite marked fatigue observed in the majority of muscles particularly during flexion and abduction at 90°, overall results indicated a lower tendency of fatigue progression in the impingement group across the tests (p < 0.05 - p < 0.001). Shoulder Strength, pain experience, and psychological status were significantly different between the two groups (P < .05). Lower tendency to fatigue progression in the impingement group can be attributed to the presence of fear avoidance and pain-related muscle inhibition, which in turn lead to adaptations in motor programme to reduce muscle recruitment and activation. The significantly higher levels of pain experience and anxiety/depression in the impingement group further support this proposition. Copyright © 2017 Elsevier Ltd. All rights reserved.

Elevated temperature biaxial fatigue

NASA Technical Reports Server (NTRS)

Jordan, E. H.

1984-01-01

A three year experimental program for studying elevated temperature biaxial fatigue of a nickel based alloy Hastelloy-X has been completed. A new high temperature fatigue test facility with unique capabilities has been developed. Effort was directed toward understanding multiaxial fatigue and correlating the experimental data to the existing theories of fatigue failure. The difficult task of predicting fatigue lives for non-proportional loading was used as an ultimate test for various life prediction methods being considered. The primary means of reaching improved undertanding were through several critical non-proportional loading experiments. It was discovered that the cracking mode switched from primarily cracking on the maximum shear planes at room temperature to cracking on the maximum normal strain planes at 649 C.

Fiberglass epoxy laminate fatigue properties at 300 and 20 K

NASA Technical Reports Server (NTRS)

Toth, J. M., Jr.; Bailey, W. J.; Boyce, D. A.

1985-01-01

A subcritical liquid hydrogen orbital storage and supply experiment is being designed for flight in the Space Shuttle cargo bay. The Cryogenic Fluid Management Experiment (CFME) includes a liquid hydrogen tank supported in a vacuum jacket by two fiberglass epoxy composite trunnion mounts. The ability of the CFME to last for the required seven missions depends primarily on the fatigue life of the composite trunnions at cryogenic temperatures. To verify the trunnion design and test the performance of the composite material, fatigue property data at 300 and 20 K were obtained for the specific E-glass fabric/S-glass unidirectional laminate that will be used for the CFME trunnions. The fatigue life of this laminate was greater at 20 K than at 300 K, and was satisfactory for the intended application.

The Relationship of On-Call Work with Fatigue, Work-Home Interference, and Perceived Performance Difficulties.

PubMed

Ziebertz, Carla M; van Hooff, Madelon L M; Beckers, Debby G J; Hooftman, Wendela E; Kompier, Michiel A J; Geurts, Sabine A E

2015-01-01

This study examined the relationship between on-call duty exposure (active and total on-call hours a month, number of calls per duty) and employees' experiences of being on-call (stress due to unpredictability, ability to relax during inactive on-call periods, restrictions during on-call duties, on-call work demands, and satisfaction with compensation for on-call duties) on the one hand and fatigue, strain-based and time-based work-home interference (WHI), and perceived on-call performance difficulties (PPD) on the other hand. Cross-sectional survey data were collected among a large heterogeneous sample of Dutch employees (N = 5437). The final sample consisted of 157 on-call workers (23-69 years, 71% males). Data were analyzed by means of hierarchical regression analyses (controlling for age and job characteristics). Differences in on-call work exposure were not systematically related to fatigue, WHI, and PPD (all p's >0.50). The experience of being on-call explained a medium proportion of the variation in fatigue and strain-based WHI and a medium to large proportion of the variation in time-based WHI and PPD over and above the control variables. Our results suggest that it is employees' experience of being on-call, especially the experience of stress due to the unpredictability, rather than the amount of exposure, that is related to fatigue, WHI, and perceived on-call performance difficulties.

The tired teen: A review of the assessment and management of the adolescent with sleepiness and fatigue

PubMed Central

Findlay, Sheri M

2008-01-01

The symptoms of sleepiness and fatigue are frequently encountered when caring for adolescents. Up to 40% of healthy teens experience regular sleepiness, defined as an increased tendency to fall asleep. Fatigue is the perception of low energy following normal activity and is reported by up to 30% of well teens. Chronic fatigue syndrome is an unusual syndrome with severe fatigue accompanied by other physical and neurological symptoms. A thorough assessment is required for all teens with sleepiness and fatigue; however, a treatable underlying medical condition is rarely found. Most fatigue and sleepiness in teens is attributable to lifestyle issues, notably too little time spent sleeping. Physicians are in a position to screen for, assess and manage these common conditions in teens. PMID:19119351

An engineering approach to the prediction of fatigue behavior of unnotched/notched fiber reinforced composite laminates

NASA Technical Reports Server (NTRS)

Kulkarni, S. V.; Mclaughlin, P. V., Jr.

1978-01-01

An engineering approach is proposed for predicting unnotched/notched laminate fatigue behavior from basic lamina fatigue data. The fatigue analysis procedure was used to determine the laminate property (strength/stiffness) degradation as a function of fatigue cycles in uniaxial tension and in plane shear. These properties were then introduced into the failure model for a notched laminate to obtain damage growth, residual strength, and failure mode. The approach is thus essentially a combination of the cumulative damage accumulation (akin to the Miner-Palmgren hypothesis and its derivatives) and the damage growth rate (similar to the fracture mechanics approach) philosophies. An analysis/experiment correlation appears to confirm the basic postulates of material wearout and the predictability of laminate fatigue properties from lamina fatigue data.

Verification of Cold Working and Interference Levels at Fastener Holes

DTIC Science & Technology

2009-02-01

of the Residual Stress Field on the Fatigue Coupons ........................................ 32 3.3.3 Fractography of Fatigue Test Coupons...predictions to fatigue experiment results (none of the literature we reviewed described fractography of cracks propagating through residual stress...ensures continued safety, readiness, and controlled maintenance costs. These methods augment and enhance traditional safe-life and damage tolerance

The Experiences of Licensed Mental Health Professionals Who Have Encountered and Navigated through Compassion Fatigue

ERIC Educational Resources Information Center

Jorgensen, Louise B.

2012-01-01

The purpose of this dissertation study was to increase understanding of licensed mental health professionals' experiences as they have encountered and navigated through compassion fatigue (CF). CF is a complex construct with an attendant constellation of secondary stress responses. In order to examine the complex and varying factors…

Contact fatigue of human enamel: Experiments, mechanisms and modeling.

PubMed

Gao, S S; An, B B; Yahyazadehfar, M; Zhang, D; Arola, D D

2016-07-01

Cyclic contact between natural tooth structure and engineered ceramics is increasingly common. Fatigue of the enamel due to cyclic contact is rarely considered. The objectives of this investigation were to evaluate the fatigue behavior of human enamel by cyclic contact, and to assess the extent of damage over clinically relevant conditions. Cyclic contact experiments were conducted using the crowns of caries-free molars obtained from young donors. The cuspal locations were polished flat and subjected to cyclic contact with a spherical indenter of alumina at 2Hz. The progression of damage was monitored through the evolution in contact displacement, changes in the contact hysteresis and characteristics of the fracture pattern. The contact fatigue life diagram exhibited a decrease in cycles to failure with increasing cyclic load magnitude. Two distinct trends were identified, which corresponded to the development and propagation of a combination of cylindrical and radial cracks. Under contact loads of less than 400N, enamel rod decussation resisted the growth of subsurface cracks. However, at greater loads the damage progressed rapidly and accelerated fatigue failure. Overall, cyclic contact between ceramic appliances and natural tooth structure causes fatigue of the enamel. The extent of damage is dependent on the magnitude of cyclic stress and the ability of the decussation to arrest the fatigue damage. Copyright © 2016 Elsevier Ltd. All rights reserved.

Fatigue life estimation of a 1D aluminum beam under mode-I loading using the electromechanical impedance technique

NASA Astrophysics Data System (ADS)

Lim, Yee Yan; Kiong Soh, Chee

2011-12-01

Structures in service are often subjected to fatigue loads. Cracks would develop and lead to failure if left unnoticed after a large number of cyclic loadings. Monitoring the process of fatigue crack propagation as well as estimating the remaining useful life of a structure is thus essential to prevent catastrophe while minimizing earlier-than-required replacement. The advent of smart materials such as piezo-impedance transducers (lead zirconate titanate, PZT) has ushered in a new era of structural health monitoring (SHM) based on non-destructive evaluation (NDE). This paper presents a series of investigative studies to evaluate the feasibility of fatigue crack monitoring and estimation of remaining useful life using the electromechanical impedance (EMI) technique employing a PZT transducer. Experimental tests were conducted to study the ability of the EMI technique in monitoring fatigue crack in 1D lab-sized aluminum beams. The experimental results prove that the EMI technique is very sensitive to fatigue crack propagation. A proof-of-concept semi-analytical damage model for fatigue life estimation has been developed by incorporating the linear elastic fracture mechanics (LEFM) theory into the finite element (FE) model. The prediction of the model matches closely with the experiment, suggesting the possibility of replacing costly experiments in future.

Basic psychological need experiences, fatigue, and sleep in individuals with unexplained chronic fatigue.

PubMed

Campbell, Rachel; Tobback, Els; Delesie, Liesbeth; Vogelaers, Dirk; Mariman, An; Vansteenkiste, Maarten

2017-12-01

Grounded in self-determination theory, this study tested the hypothesis that the satisfaction and frustration of the psychological needs for autonomy, competence, and relatedness would relate to fatigue and subjective and objective sleep parameters, with stress and negative sleep cognitions playing an explanatory role in these associations. During a stay at a sleep laboratory in Belgium, individuals with unexplained chronic fatigue (N = 160; 78% female) underwent polysomnography and completed a questionnaire at 3 different points in time (i.e., after arrival in the sleep lab, before bedtime, and the following morning) that assessed their need-based experiences and stress during the previous week, fatigue during the preceding day, and sleep-related cognitions and sleep during the previous night. Results indicated that need frustration related to higher stress, which in turn, related to higher evening fatigue. Need frustration also related to poorer subjective sleep quality and shorter sleep duration, as indicated by both subjective and objective shorter total sleep time and subjective (but not objective) longer sleep latency. These associations were accounted for by stress and negative sleep cognitions. These findings suggest that health care professionals working with individuals with unexplained chronic fatigue may consider focusing on basic psychological needs within their therapeutic approach. Copyright © 2017 John Wiley & Sons, Ltd.

In-situ monitoring of acoustic linear and nonlinear behavior of titanium alloys during cycling loading

NASA Astrophysics Data System (ADS)

Frouin, Jerome; Matikas, Theodore E.; Na, Jeong K.; Sathish, Shamachary

1999-02-01

An in-situ technique to measure sound velocity, ultrasonic attenuation and acoustic nonlinear property has been developed for characterization and early detection of fatigue damage in aerospace materials. A previous experiment using the f-2f technique on Ti-6Al-4V dog bone specimen fatigued at different stage of fatigue has shown that the material nonlinearity exhibit large change compared to the other ultrasonic parameter. Real-time monitoring of the nonlinearity may be a future tool to characterize early fatigue damage in the material. For this purpose we have developed a computer software and measurement technique including hardware for the automation of the measurement. New transducer holder and special grips are designed. The automation has allowed us to test the long-term stability of the electronics over a period of time and so proof of the linearity of the system. For the first time, a real-time experiment has been performed on a dog-bone specimen from zero fatigue al the way to the final fracture.

Stuy on Fatigue Life of Aluminum Alloy Considering Fretting

NASA Astrophysics Data System (ADS)

Yang, Maosheng; Zhao, Hongqiang; Wang, Yunxiang; Chen, Xiaofei; Fan, Jiali

2018-01-01

To study the influence of fretting on Aluminum Alloy, a global finite element model considering fretting was performed using the commercial code ABAQUS. With which a new model for predicting fretting fatigue life has been presented based on friction work. The rationality and effectiveness of the model were validated according to the contrast of experiment life and predicting life. At last influence factor on fretting fatigue life of aerial aluminum alloy was investigated with the model. The results revealed that fretting fatigue life decreased monotonously with the increasing of normal load and then became constant at higher pressures. At low normal load, fretting fatigue life was found to increase with increase in the pad radius. At high normal load, however, the fretting fatigue life remained almost unchanged with changes in the fretting pad radius. The bulk stress amplitude had the dominant effect on fretting fatigue life. The fretting fatigue life diminished as the bulk stress amplitude increased.

Brain Tumors and Fatigue

MedlinePlus

... tiredness. You may experience a profound lack of energy that can come on suddenly and bring dramatic ... to manage the severity. Respect the Fatigue The energy you’re accustomed to having has been transferred ...

'Sometimes it feels as if the world goes on without me': adolescents' experiences of living with chronic fatigue syndrome.

PubMed

Winger, Anette; Ekstedt, Mirjam; Wyller, Vegard B; Helseth, Sølvi

2014-09-01

To explore the experience of being an adolescent with chronic fatigue syndrome. Despite ample research, chronic fatigue syndrome is still poorly understood, and there are still controversies related to the illness. Adolescents with chronic fatigue syndrome are often unable to attend school and lose social relations with friends. The challenges they face will affect their quality of life. A qualitative, phenomenological hermeneutical design. Six boys and twelve girls, aged 12-18, were interviewed, emphasising their own experiences living with chronic fatigue syndrome. Analyses were performed using a phenomenological hermeneutical method. The core theme, 'Sometimes it feels as if the world goes on without me', encompasses the feelings an adolescent living with chronic fatigue syndrome might have about life. The core theme was supported by four subthemes: 'On the side of life--locked in and shut out'; 'the body, the illness and me'; 'if the illness is not visible to others, does it exist?'; and 'handling life while hoping for a better future'. The subthemes reflect the experience of social isolation, their own and others' understanding of the illness and hope for the future. Not being able to be with friends, or attend school, made the adolescents feel different and forgotten. They felt alienated in their own bodies and were struggling to be visible to themselves and to their surroundings. Spending less time with friends and more time with their parents constituted a threat to independence and development. Yet they managed to envision a better future despite all the difficulties. To provide effective support and constructive relations to adolescents with chronic fatigue syndrome, all health professions involved need insight from the persons who are themselves ill. Health centres could function as resource centres for patients and healthcare professionals. © 2013 John Wiley & Sons Ltd.

Atomistic origin of size effects in fatigue behavior of metallic glasses

NASA Astrophysics Data System (ADS)

Sha, Zhendong; Wong, Wei Hin; Pei, Qingxiang; Branicio, Paulo Sergio; Liu, Zishun; Wang, Tiejun; Guo, Tianfu; Gao, Huajian

2017-07-01

While many experiments and simulations on metallic glasses (MGs) have focused on their tensile ductility under monotonic loading, the fatigue mechanisms of MGs under cyclic loading still remain largely elusive. Here we perform molecular dynamics (MD) and finite element simulations of tension-compression fatigue tests in MGs to elucidate their fatigue mechanisms with focus on the sample size effect. Shear band (SB) thickening is found to be the inherent fatigue mechanism for nanoscale MGs. The difference in fatigue mechanisms between macroscopic and nanoscale MGs originates from whether the SB forms partially or fully through the cross-section of the specimen. Furthermore, a qualitative investigation of the sample size effect suggests that small sample size increases the fatigue life while large sample size promotes cyclic softening and necking. Our observations on the size-dependent fatigue behavior can be rationalized by the Gurson model and the concept of surface tension of the nanovoids. The present study sheds light on the fatigue mechanisms of MGs and can be useful in interpreting previous experimental results.

Fatigue Behavior of Inconel 718 TIG Welds

NASA Astrophysics Data System (ADS)

Alexopoulos, Nikolaos D.; Argyriou, Nikolaos; Stergiou, Vasillis; Kourkoulis, Stavros K.

2014-08-01

Mechanical behavior of reference and TIG-welded Inconel 718 specimens was examined in the present work. Tensile, constant amplitude fatigue, and fracture toughness tests were performed in ambient temperature for both, reference and welded specimens. Microstructure revealed the presence of coarse and fine-grained heat-affected zones. It has been shown that without any post-weld heat treatment, welded specimens maintained their tensile strength properties while their ductility decreased by more than 40%. It was found that the welded specimens had lower fatigue life and this decrease was a function of the applied fatigue maximum stress. A 30% fatigue life decrease was noticed in the high cycle fatigue regime for the welded specimens while this decrease exceeded 50% in the low cycle fatigue regime. Cyclic stress-strain curves showed that Inconel 718 experiences a short period of hardening followed by softening for all fatigue lives. Cyclic fatigue response of welded specimens' exhibited cyclically stable behavior. Finally, a marginal decrease was noticed in the Mode I fracture toughness of the welded specimens.

Isothermal and thermal-mechanical fatigue of VVER-440 reactor pressure vessel steels

NASA Astrophysics Data System (ADS)

Fekete, Balazs; Trampus, Peter

2015-09-01

The fatigue life of the structural materials 15Ch2MFA (CrMoV-alloyed ferritic steel) and 08Ch18N10T (CrNi-alloyed austenitic steel) of VVER-440 reactor pressure vessel under completely reserved total strain controlled low cycle fatigue tests were investigated. An advanced test facility was developed for GLEEBLE-3800 physical simulator which was able to perform thermomechanical fatigue experiments under in-service conditions of VVER nuclear reactors. The low cycle fatigue results were evaluated with the plastic strain based Coffin-Manson law, and plastic strain energy based model as well. It was shown that both methods are able to predict the fatigue life of reactor pressure vessel steels accurately. Interrupted fatigue tests were also carried out to investigate the kinetic of the fatigue evolution of the materials. On these samples microstructural evaluation by TEM was performed. The investigated low cycle fatigue behavior can provide reference for remaining life assessment and lifetime extension analysis.

Simultaneous life extension and crack monitoring of fatigue-damaged steel members using multifunctional carbon nanotube based composites

NASA Astrophysics Data System (ADS)

Ahmed, Shafique; Schumacher, Thomas; Thostenson, Erik T.; McConnell, Jennifer

2017-04-01

Steel structures including bridges are susceptible to cracking, particularly due to fatigue-sensitive details found in older designs. Therefore, one of the major challenges to keep those steel bridges in service is to rehabilitate existing and potential fatigue damage. There are several conventional approaches to extend the fatigue-life of damaged steel members, e.g., drilling a crack stop-hole to reduce the stress concentration at the crack tip as well as welding and bolting of steel plates or adhesive-bonding of fiber-reinforced polymers (FRP) to reduce the overall stresses. Improvement in material properties of FRP and adhesives make them a viable candidate to apply for extending the fatigue-life of steel members. However, drawbacks include the potential for debonding of the adhesive layer and/or interfaces between adhesive and adherents as well as difficulty in monitoring fatigue crack growth after rehabilitation. In this research, a holistic approach is proposed and evaluated for simultaneous extension of fatigue-life and monitoring by integrating a carbon nanotube (CNT)-based sensing layer with an adhesively-bonded FRP reinforcement. CNT-based sensing layers have a nerve-like electric resistance network, which enables distributed sensing capabilities to monitor stress levels, crack growth, and damage progression. Using laboratory-scale experiments, the simultaneous fatigue-life extension and crack monitoring capability of multifunctional CNT-based composites was evaluated. This paper introduces the fundamental concept of integrated fatigue-rehabilitation and monitoring of steel members, presents a laboratory-scale experiment to demonstrate the feasibility and effectiveness, and discusses challenges for implementation in real structures.

Happy Now, Tired Later? Extraverted and Conscientious Behavior Are Related to Immediate Mood Gains, but to Later Fatigue.

PubMed

Leikas, Sointu; Ilmarinen, Ville-Juhani

2017-10-01

Experience sampling studies on Big Five-related behavior show that people display the whole spectrum of each trait in their daily behavior, and that desirable Big Five states-especially state Extraversion-are related to positive mood. However, other research lines suggest that extraverted and conscientious behavior may be mentally depleting. The present research examined this possibility by extending the time frame of the measured personality processes. A 12-day experience sampling study (N = 48; observations = 2,328) measured Big Five states, mood, stress, and fatigue five times a day. Extraverted and conscientious behavior were concurrently related to positive mood and lower fatigue, but to higher fatigue after a 3-hour delay. These relations were not moderated by personality traits. The relation between extraverted behavior and delayed fatigue was mediated by the number of people the person had encountered. Whether the person had a goal mediated the relation between conscientious behavior and delayed fatigue. Extraverted and conscientious behavior predict mental depletion after a 3-hour delay. The results help reconcile previous findings regarding the consequences of state Extraversion and provide novel information about the consequences of state Conscientiousness. © 2016 Wiley Periodicals, Inc.

Physical exercise-induced fatigue: the role of serotonergic and dopaminergic systems

PubMed Central

Cordeiro, L.M.S.; Rabelo, P.C.R.; Moraes, M.M.; Teixeira-Coelho, F.; Coimbra, C.C.; Wanner, S.P.; Soares, D.D.

2017-01-01

Brain serotonin and dopamine are neurotransmitters related to fatigue, a feeling that leads to reduced intensity or interruption of physical exercises, thereby regulating performance. The present review aims to present advances on the understanding of fatigue, which has recently been proposed as a defense mechanism instead of a “physiological failure” in the context of prolonged (aerobic) exercises. We also present recent advances on the association between serotonin, dopamine and fatigue. Experiments with rodents, which allow direct manipulation of brain serotonin and dopamine during exercise, clearly indicate that increased serotoninergic activity reduces performance, while increased dopaminergic activity is associated with increased performance. Nevertheless, experiments with humans, particularly those involving nutritional supplementation or pharmacological manipulations, have yielded conflicting results on the relationship between serotonin, dopamine and fatigue. The only clear and reproducible effect observed in humans is increased performance in hot environments after treatment with inhibitors of dopamine reuptake. Because the serotonergic and dopaminergic systems interact with each other, the serotonin-to-dopamine ratio seems to be more relevant for determining fatigue than analyzing or manipulating only one of the two transmitters. Finally, physical training protocols induce neuroplasticity, thus modulating the action of these neurotransmitters in order to improve physical performance. PMID:29069229

A population-based study of associations between current posttraumatic stress symptoms and current fatigue.

PubMed

Lerdal, Anners; Lee, Kathryn A; Rokne, Berit; Knudsen, Øistein; Wahl, Astrid K; Dahl, Alv A

2010-10-01

This study explores current experience with posttraumatic stress disorder (PTSD) symptoms and other variables (sociodemographic, mental distress, somatic morbidity, self-rated health, and quality of life [QoL]) in relation to fatigue. A representative sample of the Norwegian population (N = 3,944) was invited to participate in a mailed survey, and 1,857 (47%) returned valid responses on the questionnaire that included the Fatigue Severity Scale and the Posttraumatic Symptom Scale-10. Posttraumatic stress disorder symptoms showed a strong association with fatigue in univariate (β = .41) and multivariate analyses (β = .33). Associations between psychosocial health variables, QoL, and fatigue were confirmed. However, PTSD symptoms showed the strongest association with fatigue in the analyses. Findings need to be replicated in other population samples and in clinical samples with PTSD and fatigue.

Integrative Review of Facility Interventions to Manage Compassion Fatigue in Oncology Nurses.

PubMed

Wentzel, Dorien; Brysiewicz, Petra

2017-05-01

Oncology nurses are regularly exposed to high-stress situations that may lead to compassion fatigue, and many institutions have implemented interventions to reduce burnout in nurses, but knowledge on the feasiblity, effectiveness, and nurses' experience of interventions is lacking.
. Electronic search of literature published from 1992-2015 was performed to evaluate in-facility interventions to manage compassion fatigue in oncology nurses. Databases used included CINAHL®, PubMed, Web of Science, Google Scholar, and PsycINFO®. 
. The goal was to evaluate the effectiveness, feasibility, and nurses' experience of interventions to manage compassion fatigue. The study designs, methods, and limitations were independently screened by the authors. 
. Of 164 studies, 31 met eligibility criteria. 
. The majority of the studies were conducted in Western countries, which suggests the need for additional research in other settings to determine effective interventions that address compassion fatigue and stress cross-culturally. Quantitative and qualitative studies failed to gain high scores in terms of quality. Limited conclusions can be drawn from small studies that report on outcomes with many confounding variables, such as turnover rate or general health of nurses, from a single institution. 
. Lack of empirical precision in evaluating the effectiveness, feasibility, and nurses' experiences of interventions indicates a need for future, more rigorously designed experimental studies. Because of the global increase in the number of patients being diagnosed and living with cancer, oncology nurses should be able to recognize and manage compassion fatigue.

Al-Li alloy AA2198's very high cycle fatigue crack initiation mechanism and its fatigue thermal effect

NASA Astrophysics Data System (ADS)

Xu, Luopeng; Cao, Xiaojian; Chen, Yu; Wang, Qingyuan

2015-10-01

AA2198 alloy is one of the third generation Al-Li alloys which have low density, high elastic modulus, high specific strength and specific stiffness. Compared With the previous two generation Al-Li alloys, the third generation alloys have much improved in alloys strength, corrosion resistance and weldable characteristic. For these advantages, the third generation Al-Li alloys are used as aircraft structures, such as C919 aviation airplane manufactured by China and Russia next generation aviation airplane--MS-21. As we know, the aircraft structures are usually subjected to more than 108 cycles fatigue life during 20-30 years of service, however, there is few reported paper about the third generation Al-Li alloys' very high cycle fatigue(VHCF) which is more than 108 cycles fatigue. The VHCF experiment of AA2198 have been carried out. The two different initiation mechanisms of fatigue fracture have been found in VHCF. The cracks can initiate from the interior of the testing material with lower stress amplitude and more than 108 cycles fatigue life, or from the surface or subsurface of material which is the dominant reason of fatigue failures. During the experiment, the infrared technology is used to monitor the VHCF thermal effect. With the increase of the stress, the temperature of sample is also rising up, increasing about 15 °C for every 10Mpa. The theoretical thermal analysis is also carried out.

Fatigue of DIN 1.4914 martensitic stainless steel in a hydrogen environment

NASA Astrophysics Data System (ADS)

Shakib, J. I.; Ullmaier, H.; Little, E. A.; Faulkner, R. G.; Schmilz, W.; Chung, T. E.

1994-09-01

Fatigue tests at room temperature in vacuum, air and hydrogen have been carried out on specimens of DIN 1.4914 martensitic stainless steel in load-controlled, push-pull type experiments. Fatigue lifetimes in hydrogen are significantly lower than in both vacuum and air and the degradation is enhanced by lowering the test frequency or introducing hold times into the tension half-cycle. Fractographic examinations reveal hydrogen embrittlement effects in the form of internal cracking between fatigue striations together with surface modifications, particularly at low stress amplitudes. It is suggested that gaseous hydrogen can influence both fatigue crack initiation and propagation events in martensitic steels.

Experimental study on visual detection for fatigue of fixed-position staff.

PubMed

Nie, Baisheng; Huang, Xin; Chen, Yang; Li, Anjin; Zhang, Ruming; Huang, Jinxin

2017-11-01

Fatigue can lead to decreased work performance and poorer safety and health condition. Fatigue is ubiquitous in production and in life, while the research on it is mainly concentrated in the automotive driving, aircraft piloting and other fields, and it is insufficient to study on the fatigue of fixed-position staff. This paper puts forward a non-contact visual image method, which can monitor the extent of fatigue of fixed-position staff. Fatigue threshold used in judgment is obtained by processing the recorded data of visual images of the experimental subjects when fatiguing and by analyzing eye closure time, percentage of eyelid closure (PERCLOS) value, frequency and number of blinks. The results show that there is significant difference among the four indicators before and after experiment subjects undergo fatigue. The fatigue of experimental subjects is obvious when eye closure time is 3.5 s/min, PERCLOS value 6%, and blink frequency 0.4 times/s. This provides a reference for a wider range of detection of fatigue and a method for avoiding mistakes and accidents. Copyright © 2017 Elsevier Ltd. All rights reserved.

Have restricted working hours reduced junior doctors' experience of fatigue? A focus group and telephone interview study.

PubMed

Morrow, Gill; Burford, Bryan; Carter, Madeline; Illing, Jan

2014-03-06

To explore the effects of the UK Working Time Regulations (WTR) on trainee doctors' experience of fatigue. Qualitative study involving focus groups and telephone interviews, conducted in Spring 2012 with doctors purposively selected from Foundation and specialty training. Final compliance with a 48 h/week limit had been required for trainee doctors since August 2009. Framework analysis of data. 9 deaneries in all four UK nations; secondary care. 82 doctors: 53 Foundation trainees and 29 specialty trainees. 36 participants were male and 46 female. Specialty trainees were from a wide range of medical and surgical specialties, and psychiatry. Implementation of the WTR, while acknowledged as an improvement to the earlier situation of prolonged excessive hours, has not wholly overcome experience of long working hours and fatigue. Fatigue did not only arise from the hours that were scheduled, but also from an unpredictable mixture of shifts, work intensity (which often resulted in educational tasks being taken home) and inadequate rest. Fatigue was also caused by trainees working beyond their scheduled hours, for reasons such as task completion, accessing additional educational opportunities beyond scheduled hours and staffing shortages. There were also organisational, professional and cultural drivers, such as a sense of responsibility to patients and colleagues and the expectations of seniors. Fatigue was perceived to affect efficiency of skills and judgement, mood and learning capacity. Long-term risks of continued stress and fatigue, for doctors and for the effective delivery of a healthcare service, should not be ignored. Current monitoring processes do not reflect doctors' true working patterns. The effectiveness of the WTR cannot be considered in isolation from the culture and context of the workplace. On-going attention needs to be paid to broader cultural issues, including the relationship between trainees and seniors.

Muscle vibration sustains motor unit firing rate during submaximal isometric fatigue in humans

PubMed Central

Griffin, L; Garland, S J; Ivanova, T; Gossen, E R

2001-01-01

In keeping with the ‘muscular wisdom hypothesis’, many studies have documented that the firing rate of the majority of motor units decreased during fatiguing isometric contractions. The present study investigated whether the application of periodic muscle vibration, which strongly activates muscle spindles, would alter the modulation of motor unit firing rate during submaximal fatiguing isometric contractions. Thirty-three motor units from the lateral head of the triceps brachii muscle were recorded from 10 subjects during a sustained isometric 20 % maximal voluntary contraction (MVC) of the elbow extensors. Vibration was interposed on the contraction for 2 s every 10 s. Twenty-two motor units were recorded from the beginning of the fatigue task. The discharge rate of the majority of motor units remained constant (12/22) or increased (4/22) with fatigue. Six motor units demonstrated a reduction in discharge rate that later returned toward initial values; these motor units had higher initial discharge rates than the other 16 motor units. In a second series of experiments, four subjects held a sustained isometric 20 % MVC for 2 min and then vibration was applied as above for the remainder of the contraction. In this case, motor units initially demonstrated a decrease in firing rate that increased after the vibration was applied. Thus muscle spindle disfacilitation of the motoneurone pool may be associated with the decline of motor unit discharge rate observed during the first 2 min of the contraction. In a third set of experiments, seven subjects performed the main experiment on one occasion and repeated the fatigue task without vibration on a second occasion. Neither the endurance time of the fatiguing contraction nor the MVC torque following fatigue was affected by the application of vibration. This finding calls into question the applicability of the muscular wisdom hypothesis to submaximal contractions. PMID:11559785

Muscle vibration sustains motor unit firing rate during submaximal isometric fatigue in humans.

PubMed

Griffin, L; Garland, S J; Ivanova, T; Gossen, E R

2001-09-15

1. In keeping with the 'muscular wisdom hypothesis', many studies have documented that the firing rate of the majority of motor units decreased during fatiguing isometric contractions. The present study investigated whether the application of periodic muscle vibration, which strongly activates muscle spindles, would alter the modulation of motor unit firing rate during submaximal fatiguing isometric contractions. 2. Thirty-three motor units from the lateral head of the triceps brachii muscle were recorded from 10 subjects during a sustained isometric 20 % maximal voluntary contraction (MVC) of the elbow extensors. Vibration was interposed on the contraction for 2 s every 10 s. Twenty-two motor units were recorded from the beginning of the fatigue task. The discharge rate of the majority of motor units remained constant (12/22) or increased (4/22) with fatigue. Six motor units demonstrated a reduction in discharge rate that later returned toward initial values; these motor units had higher initial discharge rates than the other 16 motor units. 3. In a second series of experiments, four subjects held a sustained isometric 20 % MVC for 2 min and then vibration was applied as above for the remainder of the contraction. In this case, motor units initially demonstrated a decrease in firing rate that increased after the vibration was applied. Thus muscle spindle disfacilitation of the motoneurone pool may be associated with the decline of motor unit discharge rate observed during the first 2 min of the contraction. 4. In a third set of experiments, seven subjects performed the main experiment on one occasion and repeated the fatigue task without vibration on a second occasion. Neither the endurance time of the fatiguing contraction nor the MVC torque following fatigue was affected by the application of vibration. This finding calls into question the applicability of the muscular wisdom hypothesis to submaximal contractions.

Shared responsibility for managing fatigue: Hearing the pilots

PubMed Central

O’Keeffe, Karyn M.; Signal, T. Leigh; Gander, Philippa H.

2018-01-01

In commercial aviation, fatigue is defined as a physiological state of reduced mental or physical performance capability resulting from sleep loss, extended wakefulness, circadian phase, and/or workload. The International Civil Aviation Organisation mandates that responsibility for fatigue risk management is shared between airline management, pilots, and support staff. However, to date, the majority of research relating to fatigue mitigations in long range operations has focused on the mitigations required or recommended by regulators and operators. Little research attention has been paid to the views or operational experience of the pilots who use these (or other) mitigations. This study focused on pilots’ views and experiences of in-flight sleep as the primary fatigue mitigation on long range flights. It also sought information about other fatigue mitigation strategies they use. Thematic analysis was used to explore written comments from diary and survey data collected during long range and ultra-long range trips (N = 291 pilots on three different aircraft types, 17 different out-and-back trips, and four airlines based on three continents). The findings indicate that the recommended fatigue mitigation strategies on long-haul flights (particularly in-flight sleep) are effective and well-utilised, consistent with quantitative findings from the same trips. Importantly however, the analyses also highlight areas that require further investigation, including flight preparation strategies in relation to the uncertainty of in-flight break allocation. There were two strategies for sleep prior to a flight: maximising sleep if pilots were expecting later breaks in the flight; or minimising sleep if they were expecting breaks earlier or at unfavourable times in the circadian cycle. They also provide a broader view of the factors that affect the amount and quality of pilots’ in-flight sleep, about which evidence has previously been largely anecdotal. The study underscores the value of including the views and experience of pilots in fatigue risk management. PMID:29782533

The Relationship of On-Call Work with Fatigue, Work-Home Interference, and Perceived Performance Difficulties

PubMed Central

Ziebertz, Carla M.; van Hooff, Madelon L. M.; Beckers, Debby G. J.; Hooftman, Wendela E.; Kompier, Michiel A. J.; Geurts, Sabine A. E.

2015-01-01

Objectives. This study examined the relationship between on-call duty exposure (active and total on-call hours a month, number of calls per duty) and employees' experiences of being on-call (stress due to unpredictability, ability to relax during inactive on-call periods, restrictions during on-call duties, on-call work demands, and satisfaction with compensation for on-call duties) on the one hand and fatigue, strain-based and time-based work-home interference (WHI), and perceived on-call performance difficulties (PPD) on the other hand. Methods. Cross-sectional survey data were collected among a large heterogeneous sample of Dutch employees (N = 5437). The final sample consisted of 157 on-call workers (23–69 years, 71% males). Data were analyzed by means of hierarchical regression analyses (controlling for age and job characteristics). Results. Differences in on-call work exposure were not systematically related to fatigue, WHI, and PPD (all p's >0.50). The experience of being on-call explained a medium proportion of the variation in fatigue and strain-based WHI and a medium to large proportion of the variation in time-based WHI and PPD over and above the control variables. Conclusions. Our results suggest that it is employees' experience of being on-call, especially the experience of stress due to the unpredictability, rather than the amount of exposure, that is related to fatigue, WHI, and perceived on-call performance difficulties. PMID:26558276

Cognitive behavioural therapy for the management of inflammatory bowel disease-fatigue with a nested qualitative element: study protocol for a randomised controlled trial.

PubMed

Artom, Micol; Czuber-Dochan, Wladyslawa; Sturt, Jackie; Norton, Christine

2017-05-11

Fatigue is one of the most prevalent and burdensome symptoms for patients with inflammatory bowel disease (IBD). Although fatigue increases during periods of inflammation, for some patients it persists when disease is in remission. Compared to other long-term conditions where fatigue has been extensively researched, optimal management of fatigue in patients with IBD is unknown and fatigue has rarely been the primary outcome in intervention studies. To date, interventions for the management of IBD-fatigue are sparse, have short-term effects and have not been implemented within the existing health system. There is a need to integrate current best evidence across different conditions, patient experience and clinical expertise in order to develop interventions for IBD-fatigue management that are feasible and effective. Modifying an existing intervention for patients with multiple sclerosis, this study aims to assess the feasibility and initial estimates of efficacy of a cognitive behavioural therapy (CBT) intervention for the management of fatigue in patients with IBD. The study will be a two-arm pilot randomised controlled trial. Patients will be recruited from one outpatient IBD clinic and randomised individually to either: Group 1 (CBT manual for the management of fatigue, one 60-min session and seven 30-min telephone/Skype sessions with a therapist over an eight-week period); or Group 2 (fatigue information sheet to use without therapist help). Self-reported IBD-fatigue (Inflammatory Bowel Disease-Fatigue Scale) and IBD-quality of life (United Kingdom Inflammatory Bowel Disease Questionnaire) and self-reported disease activity will be collected at baseline, three, six and 12 months post randomisation. Illness perceptions, daytime sleepiness, anxiety and depression explanatory variables will be collected only at three months post randomisation. Clinical and sociodemographic data will be retrieved from the patients' medical notes. A nested qualitative study will evaluate patient and therapist experience, and healthcare professionals' perceptions of the intervention. The study will provide evidence of the feasibility and initial estimates of efficacy of a CBT intervention for the management of fatigue in patients with IBD. Quantitative and qualitative findings from the study will contribute to the development and implementation of a large-scale randomised controlled trial assessing the efficacy of CBT interventions for IBD-fatigue. ISRCTN Registry, ISRCTN17917944 . Registered on 2 September 2016.

A sociological stance on fatigue and tiredness: Social inequalities, norms and representations.

PubMed

Loriol, Marc

2017-04-01

Fatigue is complex, representing simultaneously a physiological, psychological and social phenomenon. The sociological approach attempts to understand the experience of fatigue and its characterization at diverse periods and in various social contexts. After giving a sociological history of different forms of fatigue through the ages (acedia, melancholy, neurasthenia, chronic fatigue syndrome, etc.), this article proposes a social epidemiology of fatigue in the current period. Objectification of working and living conditions allows us to illustrate social inequalities in fatigue and exhaustion, but seems to contradict dominant social representations of fatigue today. It invites a critical discussion of contemporary theories of fatigue (such those of Alain Ehrenberg or Byung-Chul Han), which consider that fatigue is a condition of modern man, overwhelmed by his freedom. More modestly, analysis of the fatigue presented here rests on the capacity to be able to find a good balance between too much investment in work or life (which is exhausting) and not enough investment (which leads to boredom and lack of self-fulfillment). This balance depends on fragile and specific social norms in different professional or social circles and cannot be defined a priori. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Frontier studies on fatigue, autonomic nerve dysfunction, and sleep-rhythm disorder.

PubMed

Tanaka, Masaaki; Tajima, Seiki; Mizuno, Kei; Ishii, Akira; Konishi, Yukuo; Miike, Teruhisa; Watanabe, Yasuyoshi

2015-11-01

Fatigue is defined as a condition or phenomenon of decreased ability and efficiency of mental and/or physical activities, caused by excessive mental or physical activities, diseases, or syndromes. It is often accompanied by a peculiar sense of discomfort, a desire to rest, and reduced motivation, referred to as fatigue sensation. Acute fatigue is a normal condition or phenomenon that disappears after a period of rest; in contrast, chronic fatigue, lasting at least 6 months, does not disappear after ordinary rest. Chronic fatigue impairs activities and contributes to various medical conditions, such as cardiovascular disease, epileptic seizures, and death. In addition, many people complain of chronic fatigue. For example, in Japan, more than one third of the general adult population complains of chronic fatigue. It would thus be of great value to clarify the mechanisms underlying chronic fatigue and to develop efficient treatment methods to overcome it. Here, we review data primarily from behavioral, electrophysiological, and neuroimaging experiments related to neural dysfunction as well as autonomic nervous system, sleep, and circadian rhythm disorders in fatigue. These data provide new perspectives on the mechanisms underlying chronic fatigue and on overcoming it.

Data analysis for GOPEX image frames

NASA Technical Reports Server (NTRS)

Levine, B. M.; Shaik, K. S.; Yan, T.-Y.

1993-01-01

The data analysis based on the image frames received at the Solid State Imaging (SSI) camera of the Galileo Optical Experiment (GOPEX) demonstration conducted between 9-16 Dec. 1992 is described. Laser uplink was successfully established between the ground and the Galileo spacecraft during its second Earth-gravity-assist phase in December 1992. SSI camera frames were acquired which contained images of detected laser pulses transmitted from the Table Mountain Facility (TMF), Wrightwood, California, and the Starfire Optical Range (SOR), Albuquerque, New Mexico. Laser pulse data were processed using standard image-processing techniques at the Multimission Image Processing Laboratory (MIPL) for preliminary pulse identification and to produce public release images. Subsequent image analysis corrected for background noise to measure received pulse intensities. Data were plotted to obtain histograms on a daily basis and were then compared with theoretical results derived from applicable weak-turbulence and strong-turbulence considerations. Processing steps are described and the theories are compared with the experimental results. Quantitative agreement was found in both turbulence regimes, and better agreement would have been found, given more received laser pulses. Future experiments should consider methods to reliably measure low-intensity pulses, and through experimental planning to geometrically locate pulse positions with greater certainty.

Frankincense Essential Oil as a Supportive Therapy for Cancer-Related Fatigue: A Case Study.

PubMed

Reis, Debra; Jones, Tisha Throne

Fatigue experienced by patients diagnosed with cancer can be debilitating and can be challenging to manage. The use of supportive therapies such as essential oils is gaining popularity among patients diagnosed with cancer. This article describes one patient's experience using frankincense (Boswellia carterii) essential oil to help in the management of her fatigue. The topical application of the frankincense helped to take her fatigue from being barely able to lift her head to being able to do some basic activities of daily living.

Poststroke Fatigue: Emerging Evidence and Approaches to Management: A Scientific Statement for Healthcare Professionals From the American Heart Association.

PubMed

Hinkle, Janice L; Becker, Kyra J; Kim, Jong S; Choi-Kwon, Smi; Saban, Karen L; McNair, Norma; Mead, Gillian E

2017-07-01

At least half of all stroke survivors experience fatigue; thus, it is a common cause of concern for patients, caregivers, and clinicians after stroke. This scientific statement provides an international perspective on the emerging evidence surrounding the incidence, prevalence, quality of life, and complex pathogenesis of poststroke fatigue. Evidence for pharmacological and nonpharmacological interventions for management are reviewed, as well as the effects of poststroke fatigue on both stroke survivors and caregivers. © 2017 American Heart Association, Inc.

Childhood Adversity and Cumulative Life Stress: Risk Factors for Cancer-Related Fatigue.

PubMed

Bower, Julienne E; Crosswell, Alexandra D; Slavich, George M

2014-01-01

Fatigue is a common symptom in healthy and clinical populations, including cancer survivors. However, risk factors for cancer-related fatigue have not been identified. On the basis of research linking stress with other fatigue-related disorders, we tested the hypothesis that stress exposure during childhood and throughout the life span would be associated with fatigue in breast cancer survivors. Stress exposure was assessed using the Stress and Adversity Inventory, a novel computer-based instrument that assesses for 96 types of acute and chronic stressors that may affect health. Results showed that breast cancer survivors with persistent fatigue reported significantly higher levels of cumulative lifetime stress exposure, including more stressful experiences in childhood and in adulthood, compared to a control group of nonfatigued survivors. These findings identify a novel risk factor for fatigue in the growing population of cancer survivors and suggest targets for treatment.

Childhood Adversity and Cumulative Life Stress: Risk Factors for Cancer-Related Fatigue

PubMed Central

Bower, Julienne E.; Crosswell, Alexandra D.; Slavich, George M.

2013-01-01

Fatigue is a common symptom in healthy and clinical populations, including cancer survivors. However, risk factors for cancer-related fatigue have not been identified. On the basis of research linking stress with other fatigue-related disorders, we tested the hypothesis that stress exposure during childhood and throughout the life span would be associated with fatigue in breast cancer survivors. Stress exposure was assessed using the Stress and Adversity Inventory, a novel computer-based instrument that assesses for 96 types of acute and chronic stressors that may affect health. Results showed that breast cancer survivors with persistent fatigue reported significantly higher levels of cumulative lifetime stress exposure, including more stressful experiences in childhood and in adulthood, compared to a control group of nonfatigued survivors. These findings identify a novel risk factor for fatigue in the growing population of cancer survivors and suggest targets for treatment. PMID:24377083

Fatigue data for polyether ether ketone (PEEK) under fully-reversed cyclic loading

PubMed Central

Shrestha, Rakish; Simsiriwong, Jutima; Shamsaei, Nima

2016-01-01

In this article, the data obtained from the uniaxial fully-reversed fatigue experiments conducted on polyether ether ketone (PEEK), a semi-crystalline thermoplastic, are presented. The tests were performed in either strain-controlled or load-controlled mode under various levels of loading. The data are categorized into four subsets according to the type of tests, including (1) strain-controlled fatigue tests with adjusted frequency to obtain the nominal temperature rise of the specimen surface, (2) strain-controlled fatigue tests with various frequencies, (3) load-controlled fatigue tests without step loadings, and (4) load-controlled fatigue tests with step loadings. Accompanied data for each test include the fatigue life, the maximum (peak) and minimum (valley) stress–strain responses for each cycle, and the hysteresis stress–strain responses for each collected cycle in a logarithmic increment. A brief description of the experimental method is also given. PMID:26937465

Fatigue data for polyether ether ketone (PEEK) under fully-reversed cyclic loading.

PubMed

Shrestha, Rakish; Simsiriwong, Jutima; Shamsaei, Nima

2016-03-01

In this article, the data obtained from the uniaxial fully-reversed fatigue experiments conducted on polyether ether ketone (PEEK), a semi-crystalline thermoplastic, are presented. The tests were performed in either strain-controlled or load-controlled mode under various levels of loading. The data are categorized into four subsets according to the type of tests, including (1) strain-controlled fatigue tests with adjusted frequency to obtain the nominal temperature rise of the specimen surface, (2) strain-controlled fatigue tests with various frequencies, (3) load-controlled fatigue tests without step loadings, and (4) load-controlled fatigue tests with step loadings. Accompanied data for each test include the fatigue life, the maximum (peak) and minimum (valley) stress-strain responses for each cycle, and the hysteresis stress-strain responses for each collected cycle in a logarithmic increment. A brief description of the experimental method is also given.

Fatigue and work safety behavior in men during early fatherhood.

PubMed

Mellor, Gary; St John, Winsome

2012-01-01

This study investigated the relationship between fatigue and work safety behavior of fathers with new babies. A total of 241 fathers completed a questionnaire at 6 and 12 weeks postpartum with items on fatigue and safety behavior at work. Results revealed that fathers worked long hours, reported a moderate-to-high physical intensity of work, and experienced interrupted sleep averaging less than 6 hours. Fathers also reported moderate fatigue at both 6 and 12 weeks postbirth, which was inversely related to safety behavior. Both fatigue and sleep history made a small but statistically significant contribution to safety behavior results at 6 and 12 weeks postbirth. Findings suggest that working fathers with babies experience fatigue during early fatherhood and are unable to recover due to interrupted and poor sleep patterns. Managers should consider the potential for fatigue to compromise work safety and develop risk management strategies that target new fathers.

Compassion Fatigue in Adult Daughter Caregivers of a Parent with Dementia

PubMed Central

Day, Jennifer R.; Anderson, Ruth A.; Davis, Linda L.

2015-01-01

Adult daughters face distinct challenges caring for parents with dementia and may experience compassion fatigue: the combination of helplessness, hopelessness, an inability to be empathic, and a sense of isolation resulting from prolonged exposure to perceived suffering. Prior research on compassion fatigue has focused on professional healthcare providers and has overlooked filial caregivers. This study attempts to identify and explore risk factors for compassion fatigue in adult daughter caregivers and to substantiate further study of compassion fatigue in family caregivers. We used content analysis of baseline interviews with 12 adult daughter caregivers of a parent with dementia who participated in a randomized trial of homecare training. Four themes were identified in adult daughter caregiver interviews: (a) uncertainty; (b) doubt; (c) attachment; and (d) strain. Findings indicated adult daughter caregivers are at risk for compassion fatigue, supporting the need for a larger study exploring compassion fatigue in this population. PMID:25259643

Breast cancer and fatigue: issues for the workplace.

PubMed

Mock, V

1998-09-01

1. Women with breast cancer are at high risk for fatigue as a side effect of treatment with surgery, radiation, and chemotherapy. The risk is compounded by the multiple roles of women who return to work during treatment. 2. The fatigue experience includes a physical component of decreased functional status, an affective component of emotional distress, and a cognitive component of difficulty concentrating. These characteristics of fatigue may present significant challenges for employees. 3. The Family Medical Leave Act provides 12 weeks of unpaid leave to receive medical treatment and/or recover from treatment for breast cancer. 4. The nurse in the workplace can assess and monitor the effects of fatigue and teach employees to manage fatigue through energy conservation, effective use of energy, and health promotion activities to restore energy levels.

Understanding factors associated with misclassification of fatigue-related accidents in police record.

PubMed

Li, Yanyan; Yamamoto, Toshiyuki; Zhang, Guangnan

2018-02-01

Fatigue is one of the riskiest causes of traffic accidents threatening road safety. Due to lack of proper criteria, the identification of fatigue-related accidents by police officers largely depends on inferential evidence and their own experience. As a result, many fatigue-related accidents are misclassified and the harmfulness of fatigue on road safety is misestimated. In this paper, a joint model framework is introduced to analyze factors contributing to misclassification of a fatigue-related accident in police reports. Association rule data mining technique is employed to identify the potential interactions of factors, and logistic regression models are applied to analyze factors that hinder police officers' identification of fatigue-related accidents. Using the fatigue-related crash records from Guangdong Province during 2005-2014, factors contributing to the false positive and false negative detection of the fatigue-related accident have been identified and compared. Some variables and interactions were identified to have significant impacts on fatigue-related accident detection. Based on the results, it can be inferred that the stereotype of certain groups of drivers, crash types, and roadway conditions affects police officers' judgment on fatigue-related accidents. This finding can provide useful information for training police officers and build better criteria for fatigue identification. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Fatigue effect on phase transition of pedestrian movement: experiment and simulation study

NASA Astrophysics Data System (ADS)

Luo, Lin; Fu, Zhijian; Zhou, Xiaodong; Zhu, Kongjin; Yang, Hongtai; Yang, Lizhong

2016-10-01

How to model pedestrian movement is an intriguing problem in the area of statistical physics. As a common phenomenon of pedestrian movement, fatigue has a significant negative effect on pedestrian movement, especially when pedestrians move or run with heavy luggage, rescue the wounded in disaster, climb stairs and etc. According to the field observations and previous researches, fatigue coefficient is defined as the decrease of desired velocity in this study. However, previous researches lacked quantitative analysis of the effect of fatigue on pedestrian speed. It has been a great challenge to study the effect of fatigue on pedestrian flow, since pedestrians of heterogeneous walking abilities and the change of pedestrians’ moving properties need to be taken into consideration. Thus, at first, a series of pedestrian experiments, under three different conditions, were conducted to formulate the empirical relationship among fatigue, average free velocity, and walking distance. Then the empirical formulation of pedestrian fatigue was imported into the multi-velocity field floor cellular automata (FFCA) model for following pedestrian dynamics analysis. The velocity ratio was adjusted dynamically to adapt the change of pedestrians’ velocity due to fatigue. The fatigue, entrance flow rate and pedestrian’s initial desired velocity are found to have significant effects on the pedestrian flow. The space-time distributions of pedestrian density and velocity were explored in detail, with phase transition analyses from a free flow phase to a congestion phase. Additionally, the ‘density wave’ in the system can be observed if a certain ratio of burdened pedestrians lay in the high density region. The envelope of the ‘density wave’ reaches its maximum amplitude around the entrance position, and gradually diminishes away from the entrance.

Physiological signal analysis for fatigue level of experienced and inexperienced drivers.

PubMed

Li, Rui; Su, Wencheng; Lu, Zhangping

2017-02-17

We studied the changes in driving fatigue levels of experienced and inexperienced drivers at 3 periods of the day: 9:00 a.m.-12:00 p.m., 12:00 p.m.-2:00 p.m., and 4:00 p.m.-6:00 p.m. Thirty drivers were involved in 120-min real-car driving, and sleepiness ratings (Stanford Sleepiness Scale, SSS; Hoddes et al. 1973 ), electroencephalogram (EEG) signals, and heart rates (HRs) were recorded. Together with principal component analysis, the relationship between EEG signals and HR was explored and used to determine a comprehensive indicator of driving fatigue. Then the comprehensive indicator was assessed via paired t test. Experienced and inexperienced drivers behaved significantly differently in terms of subjective fatigue during preliminary trials. At the beginning of trials and after termination, subjective fatigue level was aggravated with prolonged continuous driving. Moreover, we discussed the changing rules of EEG signals and HR and found that with prolonged time, the ratios of δ and β waves significantly declined, whereas that of the θ wave significantly rose. The ratio of (α + θ)/β significantly rose both before trials and after termination, but HR dropped significantly. However, one-factor analysis of variance shows that driving experience significantly affects the θ wave, (α + θ)/β ratio, and HR. We found that in a monotonous road environment, fatigue symptoms occurred in inexperienced drivers and experienced drivers after about 60 and 80 min of continuous driving, respectively. Therefore, as for drivers with different experiences, restriction on continuous driving time would avoid fatigued driving and thereby eliminate traffic accidents. We find that the comprehensive indicator changes significantly with fatigue level. The integration of different indicators improves the recognition accuracy of different driving fatigue levels.

Mercury biomagnification and the trophic structure of the ichthyofauna from a remote lake in the Brazilian Amazon.

PubMed

Azevedo-Silva, Claudio Eduardo; Almeida, Ronaldo; Carvalho, Dario P; Ometto, Jean P H B; de Camargo, Plínio B; Dorneles, Paulo R; Azeredo, Antonio; Bastos, Wanderley R; Malm, Olaf; Torres, João P M

2016-11-01

The present study assesses mercury biomagnification and the trophic structure of the ichthyofauna from the Puruzinho Lake, Brazilian Amazon. In addition to mercury determination, the investigation comprised the calculation of Trophic Magnification Factor (TMF) and Trophic Magnification Slope (TMS), through the measurements of stable isotopes of carbon (δ 13 C) and nitrogen (δ 15 N) in fish samples. These assessments were executed in two different scenarios, i.e., considering (1) all fish species or (2) only the resident fish (excluding the migratory species). Bottom litter, superficial sediment and seston were the sources used for generating the trophic position (TP) data used in the calculation of the TMF. Samples from 84 fish were analysed, comprising 13 species, which were categorized into four trophic guilds: iliophagous, planktivorous, omnivorous and piscivorous fish. The δ 13 C values pointed to the separation of the ichthyofauna into two groups. One group comprised iliophagous and planktivorous species, which are linked to the food chains of phytoplankton and detritus. The other group was composed by omnivorous and piscivorous fish, which are associated to the trophic webs of phytoplankton, bottom litter, detritus, periphyton, as well as to food chains of igapó (blackwater-flooded Amazonian forests). The TP values suggest that the ichthyofauna from the Puruzinho Lake is part of a short food web, with three well-characterized trophic levels. Mercury concentrations and δ 13 C values point to multiple sources for Hg input and transfer. The similarity in Hg levels and TP values between piscivorous and planktivorous fish suggests a comparable efficiency for the transfer of this metal through pelagic and littoral food chains. Regarding the two abovementioned scenarios, i.e., considering (1) the entire ichthyofauna and (2) only the resident species, the TMF values were 5.25 and 4.49, as well as the TMS values were 0.21 and 0.19, respectively. These findings confirm that Hg biomagnifies through the food web of Puruzinho Lake ichthyofauna. The migratory species did not significantly change mercury biomagnification rate in Puruzinho Lake; however, they may play a relevant role in Hg transport. The biomagnification rate (TMS value) in Puruzinho Lake was higher than the average values for its latitude, being comparable to TMS values of temperate and polar systems (marine and freshwater environments). Copyright © 2016 Elsevier Inc. All rights reserved.

Effects of human fatigue on speech signals

NASA Astrophysics Data System (ADS)

Stamoulis, Catherine

2004-05-01

Cognitive performance may be significantly affected by fatigue. In the case of critical personnel, such as pilots, monitoring human fatigue is essential to ensure safety and success of a given operation. One of the modalities that may be used for this purpose is speech, which is sensitive to respiratory changes and increased muscle tension of vocal cords, induced by fatigue. Age, gender, vocal tract length, physical and emotional state may significantly alter speech intensity, duration, rhythm, and spectral characteristics. In addition to changes in speech rhythm, fatigue may also affect the quality of speech, such as articulation. In a noisy environment, detecting fatigue-related changes in speech signals, particularly subtle changes at the onset of fatigue, may be difficult. Therefore, in a performance-monitoring system, speech parameters which are significantly affected by fatigue need to be identified and extracted from input signals. For this purpose, a series of experiments was performed under slowly varying cognitive load conditions and at different times of the day. The results of the data analysis are presented here.

Fretting Fatigue Experiment and Analysis of AlSi9Cu2Mg Alloy

PubMed Central

Wang, Jun; Xu, Hong; Su, Tiexiong; Zhang, Yi; Guo, Zhen; Mao, Huping; Zhang, Yangang

2016-01-01

An investigation was carried out in order to study the fretting fatigue behavior of an AlSi9Cu2Mg aluminum alloy. The fretting fatigue tests of AlSi9Cu2Mg were performed using a specially designed testing machine. The failure mechanism of fretting fatigue was explored by studying the fracture surfaces, fretting scars, fretting debris, and micro-hardness of fretting fatigue specimens using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and micro Vickers hardness test techniques. The experimental results show that the fretting fatigue limit (42 MPa) is significantly reduced to approximately 47% of the plain fatigue limit (89 MPa) under 62.5 MPa contact pressure. Furthermore, the fretting fatigue life decreases with increasing alternating stress and increasing contact pressure. The examination results suggest that the stress concentrates induced by oxidation-assisted wear on the contact interface led to the earlier initiation and propagation of crack under the fretting condition. PMID:28774103

Fretting Fatigue Experiment and Analysis of AlSi9Cu2Mg Alloy.

PubMed

Wang, Jun; Xu, Hong; Su, Tiexiong; Zhang, Yi; Guo, Zhen; Mao, Huping; Zhang, Yangang

2016-12-05

An investigation was carried out in order to study the fretting fatigue behavior of an AlSi9Cu2Mg aluminum alloy. The fretting fatigue tests of AlSi9Cu2Mg were performed using a specially designed testing machine. The failure mechanism of fretting fatigue was explored by studying the fracture surfaces, fretting scars, fretting debris, and micro-hardness of fretting fatigue specimens using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and micro Vickers hardness test techniques. The experimental results show that the fretting fatigue limit (42 MPa) is significantly reduced to approximately 47% of the plain fatigue limit (89 MPa) under 62.5 MPa contact pressure. Furthermore, the fretting fatigue life decreases with increasing alternating stress and increasing contact pressure. The examination results suggest that the stress concentrates induced by oxidation-assisted wear on the contact interface led to the earlier initiation and propagation of crack under the fretting condition.

Fatigue in young survivors of extracranial childhood cancer: a Finnish nationwide survey.

PubMed

Mört, Susanna; Lähteenmäki, Päivi M; Matomäki, Jaakko; Salmi, Toivo T; Salanterä, Sanna

2011-11-01

To evaluate self-reports of fatigue by young cancer survivors (aged 11-18 years), to compare young survivors' fatigue scores with the scores of a healthy control group and of the parent proxy evaluation, and to analyze whether demographic or disease-related factors are associated with young survivors' fatigue. Cross-sectional quantitative study. An urban hospital in southwestern Finland. 384 survivors diagnosed with an extracranial malignancy at age 16 or younger, who have survived four or more years postdiagnosis, and who are free of cancer. General matched population controls were randomly selected from the Finnish Population Registry. Demographic data and a self-report written fatigue questionnaire. Total fatigue (TF), general fatigue (GF), sleep or rest fatigue (SF), and cognitive fatigue. The control populations reported significantly more issues with TF, GF, and SF than did the survivor population. In survivors, older age, the need for remedial education at school, and a sarcoma diagnosis were associated with increasing fatigue, whereas female gender, better school grades, and greater health-related quality-of-life (HRQOL) scores were associated with lower fatigue. The study variables explained 49%-65% of the variation in fatigue scores. Although survivors and their matched controls seem to have similar fatigue, subgroups of survivors do experience excessive fatigue, which may have an impact on their HRQOL. This study increases the knowledge about fatigue levels of young survivors of extracranial malignancies and identifies the need for instruments specifically designed to assess fatigue in this population. The healthcare team should pay attention to the fatigue level of young survivors, particularly SF.

Electrical fatigue behaviour in lead zirconate titanate: an experimental and theoretical study

NASA Astrophysics Data System (ADS)

Bhattacharyya, Mainak; Arockiarajan, A.

2013-08-01

A systematic investigation on electrical fatigue in lead zirconate titanate (PZT) is carried out for different loading frequencies. Experiments are conducted up to 106 cycles to measure the electrical displacement and longitudinal strain on bulk ceramics in the bipolar mode with large electrical loading conditions. A simplified macroscopic model based on physical mechanisms of domain switching is developed to predict the non-linear behaviour. In this model, the volume fraction of a domain is used as the internal variable by considering the mechanisms of domain nucleation and propagation (domain wall movement). The measured material properties at different fatigue cycles are incorporated into the switching model as damage parameters and the classical strain versus electric field and electric displacement versus electric field curves are simulated. Comparison between the experiments and simulations shows that the proposed model can reproduce the characteristics of non-linear as well as fatigue responses.

Simulation and Experiment Research on Fatigue Life of High Pressure Air Pipeline Joint

NASA Astrophysics Data System (ADS)

Shang, Jin; Xie, Jianghui; Yu, Jian; Zhang, Deman

2017-12-01

High pressure air pipeline joint is important part of high pressure air system, whose reliability is related to the safety and stability of the system. This thesis developed a new type-high pressure air pipeline joint, carried out dynamics research on CB316-1995 and new type-high pressure air pipeline joint with finite element method, deeply analysed the join forms of different design schemes and effect of materials on stress, tightening torque and fatigue life of joint. Research team set up vibration/pulse test bench, carried out joint fatigue life contrast test. The result shows: the maximum stress of the joint is inverted in the inner side of the outer sleeve nut, which is consistent with the failure mode of the crack on the outer sleeve nut in practice. Simulation and experiment of fatigue life and tightening torque of new type-high pressure air pipeline joint are better than CB316-1995 joint.

Level and appraisal of fatigue are not specific in burnout.

PubMed

Van Dam, Arno; Keijsers, Ger; Verbraak, Marc; Eling, Paul; Becker, Eni

2015-01-01

Fatigue is a main feature of the burnout syndrome but also very common in other psychiatric disorders such as major depression and anxiety disorders. This raises the question of whether the level and appraisal of fatigue is experienced differently by individuals suffering from burnout than by those exhibiting anxiety disorders and major depression. If fatigue is experienced differently in burnout compared with other disorders, this may clarify why fatigue is the main feature of the burnout syndrome. This knowledge may lead to the application of specific therapeutic interventions aimed at the experience of fatigue in burnout. In the present study, we investigated whether fatigue is experienced differently in burnout patients than in patients suffering from anxiety disorders or major depression. We presented 73 burnout patients, 67 depressed patients, 57 patients with an anxiety disorder and 127 healthy participants with a rating scale containing statements about the fatigue-performance relationship, and we assessed the level of fatigue, depression and anxiety. The level of fatigue reported by burnout patients was high but did not differ from that of the other patient groups. The appraisal of fatigue also did not differ among the patient groups. The burnout patients did not appraise their fatigue as a result of unrewarding activities nor did they catastrophize fatigue in an exceptional way. Thus, the level of fatigue and the appraisal of fatigue may be less relevant to the understanding of the specific pathological processes associated with burnout than is often presumed. Copyright © 2013 John Wiley & Sons, Ltd.

Experimental study on the effect of shape of bolt and nut on fatigue strength for bolted joint

NASA Astrophysics Data System (ADS)

Matsunari, T.; Oda, K.; Tsutsumi, N.; Yakushiji, T.; Noda, N. A.; Sano, Y.

2018-06-01

In this study, the effect of curvature radius of the thread bottom and the pitch difference between of M16 bolt and nut on fatigue strength for bolted joint is considered experimentally. The M16 bolt-nut specimens having the two kinds of thread bottom radii and the pitch differences are prepared. The S-N curves for bolted specimens with different thread shapes are obtained by the stress-controlled fatigue test (stress ratio R>0). The experimental results are compared and discussed in terms of stress analysis. The finite element method is used to make a simulation of the fatigue experiment and the mean stress and stress amplitude at each thread bottom of bolt are analysed. It is found that the initiation and propagation of crack are changed by introducing the pitch difference of α=15 μm from the crack observation in cross section of the bolt specimens after the experiment. Furthermore, the fatigue life can be extended by increasing curvature radius of thread bottom and introducing the pitch difference.

Effects of a pushing intervention on pain, fatigue and birthing experiences among Taiwanese women during the second stage of labour.

PubMed

Chang, Su-Chuan; Chou, Min-Min; Lin, Kuan-Chia; Lin, Lie-Chu; Lin, Yu-Lan; Kuo, Su-Chen

2011-12-01

To evaluate maternal labour pain, fatigue, duration of the second stage of labour, the women's bearing-down experiences and the newborn infant Apgar scores when spontaneous pushing is used in an upright position. Quasi-experimental study. Medical centre in Taichung, Taiwan. 66 Women giving birth at the hospital, with 33 primigravidas assigned to each group. During the second stage of labour, the women in the experimental group pushed from an upright position and were given support to push spontaneously; the women in the control group pushed from a supine position and were supported via Valsalva pushing. Pain scores were recorded at two evaluation time points: at 10 cm of cervical dilation and one hour after the first pain score evaluation. One to four hours after childbirth, the trained nurses collected the fatigue and pushing experience scores. The women in the experimental group had a lower pain index (5.67 versus 7.15, p = 0.01), lower feelings of fatigue post birth (53.91 versus 69.39, p < 0.001), a shorter duration of the second stage of labour (91.0 versus 145.97, p = 0.02) and more positive labour experiences (39.88 versus 29.64, p < 0.001) compared with the control group. There was no significant difference in the Apgar score for newborn infants during either the first minute (7.70 versus 7.73, p = 0.72) or the fifth minute (8.91 versus 8.94, p = 0.64). The pushing intervention during the second stage of labour lessened pain and fatigue, shortened the pushing time and enhanced the pushing experience. Pushing interventions can yield increased satisfaction levels for women giving birth. Copyright © 2010 Elsevier Ltd. All rights reserved.

Single-leg hop testing following fatiguing exercise: reliability and biomechanical analysis.

PubMed

Augustsson, J; Thomeé, R; Lindén, C; Folkesson, M; Tranberg, R; Karlsson, J

2006-04-01

A fatiguing exercise protocol was combined with single-leg hop testing to improve the possibilities of evaluating the effects of training or rehabilitation interventions. In the first test-retest experiment, 11 healthy male subjects performed two trials of single-leg hops under three different test conditions: non-fatigued and following fatiguing exercise, which consisted of unilateral weight machine knee extensions at 80% and 50%, respectively, of 1 repetition maximum (1 RM) strength. Intraclass correlation coefficients ranged from 0.75 to 0.98 for different hop test conditions, indicating that all tests were reliable. For the second experiment, eight healthy male subjects performed the fatiguing exercise protocol to investigate how fatigue influences lower-extremity joint kinematics and kinetics during single-leg hops. Hip, knee and ankle joint angles, moments and powers, as well as ground-reaction forces were recorded with a six-camera, motion-capture system and a force platform. Recovery of hop performance following the fatiguing exercise was also measured. During the take-off for the single-leg hops, hip and knee flexion angles, generated powers for the knee and ankle joints, and ground-reaction forces decreased for the fatigued hop conditions compared with the non-fatigued condition (P<0.05). Compared with landing during the non-fatigued condition, hip moments and ground-reaction forces were lower for the fatigued hop conditions (P<0.05). The negative joint power was two to three times greater for the knee than for the hip and five to 10 times greater for the knee than for the ankle during landing for all test conditions (P<0.05). Most measured variables had recovered three minutes post-exercise. It is concluded that the fatiguing exercise protocol combined with single-leg hop testing was a reliable method for investigating functional performance under fatigued test conditions. Further, subjects utilized an adapted hop strategy, which employed less hip and knee flexion and generated powers for the knee and ankle joints during take-off, and less hip joint moments during landing under fatigued conditions. The large negative power values observed at the knee joint during the landing phase of the single-leg hop, during which the quadriceps muscle activates eccentrically, indicate that not only hop distance but also the ability to perform successful landings should be investigated when assessing dynamic knee function.

Subjective Fatigue in Children With Hearing Loss Assessed Using Self- and Parent-Proxy Report

PubMed Central

Gustafson, Samantha J.; Lancaster, Hope; Cho, Sun-Joo; Camarata, Stephen; Bess, Fred H.

2017-01-01

Purpose The primary purposes of this study were to examine the effects of hearing loss and respondent type (self- vs. parent-proxy report) on subjective fatigue in children. We also examined associations between child-specific factors and fatigue ratings. Method Subjective fatigue was assessed using the Pediatric Quality of Life Inventory Multidimensional Fatigue Scale (PedsQL-MFS; Varni, Burwinkle, Katz, Meeske, & Dickinson, 2002). We compared self- and parent-proxy ratings from 60 children with hearing loss (CHL) and 43 children with normal hearing (CNH). The children ranged in age from 6 to 12 years. Results School-age CHL experienced more overall and cognitive fatigue than CNH, although the differences were smaller than previously reported. Parent-proxy report was not strongly associated with child self-report, and parents tended to underestimate their child's fatigue, particularly sleep/rest fatigue. Language ability was also associated with subjective fatigue. For CHL and CNH, as language abilities increased, cognitive fatigue decreased. Conclusions School-age CHL experience more subjective fatigue than CNH. The poor association between parent-proxy and child reports suggests that the parent-proxy version of the PedsQL-MFS should not be used in isolation when assessing fatigue in school-age children. Future research should examine how language abilities may modulate fatigue and its potential academic consequences in CHL. PMID:29049623

Exploring the potential role of the advanced nurse practitioner within a care path for patients with chronic fatigue syndrome.

PubMed

Ryckeghem, Hannah; Delesie, Liesbeth; Tobback, Els; Lievens, Stefaan; Vogelaers, Dirk; Mariman, An

2017-07-01

To explore the experiences and expectations of patients with chronic fatigue syndrome and general practitioners to develop the potential role of an advanced nurse practitioner at the diagnostic care path of abnormal fatigue developed for regional transmural implementation in the Belgian provinces of East and West Flanders. Patients with chronic fatigue syndrome experience an incapacitating chronic fatigue that is present for at least 6 months. Since many uncertainties exist about the causes and progression of the disease, patients have to cope with disbelief and scepticism. Access to health care may be hampered, which could lead to inappropriate treatments and guidance. Qualitative design. Individual semi-structured interviews were conducted with patients with chronic fatigue syndrome and general practitioners in Belgium. Data were collected over 9 months in 2014-2015. All interviews were audio recorded and transcribed for qualitative analysis using open explorative thematic coding. Fifteen patients and 15 general practitioners were interviewed. Three themes were identified: mixed feelings with the diagnosis, lack of one central intermediator and insufficient coordination. Participants stressed the need for education, knowledge and an intermediator to provide relevant information at the right time and to build up a trust relationship. This qualitative exploration underscores some clear deficiencies in the guidance of patients suffering from chronic fatigue syndrome and abnormal fatigue. An advanced nurse practitioner as a central intermediator in the transmural care of these patients could promote interdisciplinary/multidisciplinary collaboration and effective communication, provide education and ensure a structured and coordinated approach. © 2016 John Wiley & Sons Ltd.

The fatigue experience for women with human immunodeficiency virus.

PubMed

Lee, K A; Portillo, C J; Miramontes, H

1999-01-01

To examine fatigue as a symptom experienced by women with human immunodeficiency virus (HIV). A convenience sample of 100 women with HIV. Independent sample t-tests were used to test for mean differences in fatigue related to variables in the women's sociocultural and home environment (ethnicity, employment, marital status, and parenting). Pearson product moment correlations were used to examine significant relationships between fatigue and physiologic variables (age, CD4 cell count, and sleep). Lower CD4 cell counts were related to more daytime sleep, higher evening fatigue, and higher morning fatigue. Morning fatigue was related to duration of wake episodes during the night, napping, and perception of sleep disturbance during the past week. The number of awakenings during the first night predicted the severity of fatigue the next evening. To understand the fatigue experienced by women with HIV, researchers and clinicians must focus on the relative contributions of sociocultural, home, and physiologic environments within which these women live. Additional research is ongoing to identify the strategies these women use to manage daily activities such that gender-relevant and culturally relevant interventions for alleviating fatigue can be tested in women with a variety of chronic illnesses, including HIV and acquired immune deficiency syndrome.

Driver fatigue and highway driving: a simulator study.

PubMed

Ting, Ping-Huang; Hwang, Jiun-Ren; Doong, Ji-Liang; Jeng, Ming-Chang

2008-06-09

Long duration of driving is a significant cause of fatigue-related accidents on motorways or major roadways. The fatigue caused by driving for extended periods acutely impairs driver alertness and performance and can compromise transportation safety. This study quantitatively measured the progression of driver fatigue and identified the conservative safe duration of continuous highway driving. Thirty young male subjects were analyzed during 90 min of laboratory-simulated highway driving. Sleepiness ratings (SSS) and reaction time (RT) tests were used to assess impairment of driver alertness and vigilance. Additionally, various measures of driving performance recorded throughout the experiment were used to measure temporal deterioration of driver performance from alert to fatigued using principal component analysis (PCA). The analytical results revealed that SSS scores, reaction times (RTs) and unstable driving performance significantly increased over time, indicating that excessive driving time is a significant fatigue factor and potential cause of fatigue-related accidents. Moreover, the analytical results indicated that 80 min was the safe limit for monotonous highway driving. Based on the experimental findings of this study, public awareness of the adverse affects of driver fatigue during long-distance driving should be enhanced. This study provides explicit information of fatigue development that can be used to prevent fatigue-related accidents.

Fatigue as a cause, not a consequence of depression and daytime sleepiness: a cross-lagged analysis.

PubMed

Schönberger, Michael; Herrberg, Marlene; Ponsford, Jennie

2014-01-01

To examine the temporal relation between fatigue, depression, and daytime sleepiness after traumatic brain injury. Fatigue is a frequent and disabling consequence of traumatic brain injury (TBI). However, it is unclear whether fatigue is a primary consequence of the structural brain injury or a secondary consequence of injury-related sequelae such as depression and daytime sleepiness. Eighty-eight adults with complicated mild-severe TBI (69% male). Fatigue Severity Scale; depression subscale of the Hospital Anxiety and Depression Scale; Epworth Sleepiness scale at baseline and 6-month follow-up. A cross-lagged path analysis computed within a structural equation modeling framework revealed that fatigue was predictive of depression (β = .20, P < .05) and sleepiness (β = .25, P < .05). However, depression and sleepiness did not predict fatigue (P > .05). The results support the view of fatigue after TBI as "primary fatigue"-that is, a consequence of the structural brain injury rather than a secondary consequence of depression or daytime sleepiness. A rehabilitation approach that assists individuals with brain injury in learning to cope with their neuropsychological and physical limitations in everyday life might attenuate their experience with fatigue.

Fatigue and radiotherapy: (B) experience in patients 9 months following treatment.

PubMed Central

Smets, E. M.; Visser, M. R.; Willems-Groot, A. F.; Garssen, B.; Schuster-Uitterhoeve, A. L.; de Haes, J. C.

1998-01-01

Little is known regarding the prevalence and course of fatigue in cancer patients after treatment has ended and no recurrence found. The present study examines fatigue in disease-free cancer patients after being treated with radiotherapy (n = 154). The following questions are addressed. First, how do patients describe their fatigue 9 months after radiotherapy and is this different from fatigue in a nonselective sample from the general population (n = 139)? Secondly, to what degree is fatigue in patients associated with sociodemographic, medical, physical and psychological factors? Finally, is it possible to predict which patients will suffer from fatigue 9 months after radiotherapy? Results indicated that fatigue in disease-free cancer patients did not differ significantly from fatigue in the general population. However, for 34% of the patients, fatigue following treatment was worse than anticipated, 39% listed fatigue as one of the three symptoms causing them most distress, 26% of patients worried about their fatigue and patients' overall quality of life was negatively related to fatigue (r = -0.46). Fatigue in disease-free patients was significantly associated with: gender, physical distress, pain rating, sleep quality, functional disability, psychological distress and depression, but not with medical (diagnosis, prognosis, co-morbidity) or treatment-related (target area, total radiation dose, fractionation) variables. The degree of fatigue, functional disability and pain before radiotherapy were the best predictors of fatigue at 9-month follow-up, explaining 30%, 3% and 4% of the variance respectively. These findings are in line with the associations found with fatigue during treatment as reported in the preceding paper in this issue. The significant associations between fatigue and both psychological and physical variables demonstrate the complex aetiology of this symptom in patients and point out the necessity of a multidisciplinary approach for its treatment. PMID:9764582

In Situ Estimation of Applied Biaxial Loads with Lamb Waves (Preprint)

DTIC Science & Technology

2012-07-01

be correct. IV. EXPERIMENTS AND RESULTS Fatigue tests were conducted for an array of six surface-bonded PZT transducers permanently attached to...because of their cumulative effects on the fatigue life of the structures. Waves propagating between array elements are directly affected by applied loads...their cumulative effects on the fatigue life of the structures. Waves propagating between array elements are directly affected by applied loads

Ecological momentary assessment of fatigue, sleepiness, and exhaustion in ESKD.

PubMed

Abdel-Kader, Khaled; Jhamb, Manisha; Mandich, Lee Anne; Yabes, Jonathan; Keene, Robert M; Beach, Scott; Buysse, Daniel J; Unruh, Mark L

2014-02-06

Many patients on maintenance dialysis experience significant sleepiness and fatigue. However, the influence of the hemodialysis (HD) day and circadian rhythms on patients' symptoms have not been well characterized. We sought to use ecological momentary assessment to evaluate day-to-day and diurnal variability of fatigue, sleepiness, exhaustion and related symptoms in thrice-weekly maintenance HD patients. Subjects used a modified cellular phone to access an interactive voice response system that administered the Daytime Insomnia Symptom Scale (DISS). The DISS assessed subjective vitality, mood, and alertness through 19 questions using 7- point Likert scales. Subjects completed the DISS 4 times daily for 7 consecutive days. Factor analysis was conducted and a mean composite score of fatigue-sleepiness-exhaustion was created. Linear mixed regression models (LMM) were used to examine the association of time of day, dialysis day and fatigue, sleepiness, and exhaustion composite scores. The 55 participants completed 1,252 of 1,540 (81%) possible assessments over the 7 day period. Multiple symptoms related to mood (e.g., feeling sad, feeling tense), cognition (e.g., difficulty concentrating), and fatigue (e.g., exhaustion, feeling sleepy) demonstrated significant daily and diurnal variation, with higher overall symptom scores noted on hemodialysis days and later in the day. In factor analysis, 4 factors explained the majority of the observed variance for DISS symptoms. Fatigue, sleepiness, and exhaustion loaded onto the same factor and were highly intercorrelated. In LMM, mean composite fatigue-sleepiness-exhaustion scores were associated with dialysis day (coefficient and 95% confidence interval [CI] 0.21 [0.02 - 0.39]) and time of day (coefficient and 95% CI 0.33 [0.25 - 0.41]. Observed associations were minimally affected by adjustment for demographics and common confounders. Maintenance HD patients experience fatigue-sleepiness-exhaustion symptoms that demonstrate significant daily and diurnal variation. The variability in symptoms may contribute to poor symptom awareness by providers and greater misclassification bias of fatigue related symptoms in clinical studies.

Sleep quality and correlates of poor sleep in patients with rheumatoid arthritis.

PubMed

Løppenthin, K; Esbensen, B A; Jennum, P; Østergaard, M; Tolver, A; Thomsen, T; Midtgaard, J

2015-12-01

The objective of this study is to examine sleep quality and correlates of poor sleep in patients with rheumatoid arthritis (RA). Five hundred patients with RA were recruited from a rheumatology outpatient clinic and included in this cross-sectional study. Sleep quality and disturbances were assessed using the Pittsburgh Sleep Quality Index (PSQI). Other instruments included the Multidimensional Fatigue Inventory, the Epworth Sleepiness Scale, and the Health Assessment Questionnaire. Disease activity was assessed according to disease activity score DAS28-CRP-based. Complete scores on PSQI were obtained from 384 patients (77 %). In those, the prevalence of poor sleep (PSQI >5) was 61 %, and the mean global PSQI score was 7.54 (SD 4.17). A linear association was found between poor sleep and mental fatigue, reduced activity related to fatigue, physical fatigue, and general fatigue. Mental fatigue and general fatigue were independently associated with sleep quality, sleep latency, sleep duration, sleep efficiency, and daytime dysfunction. However, in the linear multivariate analysis, only general fatigue 1.06 (95 % CI 1.03-1.09) and mental fatigue 1.03 (95 % CI 1.01-1.05) were found to be significant correlates for reporting poor sleep. This study shows that a majority of patients with RA experience poor sleep and that general fatigue and mental fatigue are associated with poor sleep.

Allostatic Self-efficacy: A Metacognitive Theory of Dyshomeostasis-Induced Fatigue and Depression.

PubMed

Stephan, Klaas E; Manjaly, Zina M; Mathys, Christoph D; Weber, Lilian A E; Paliwal, Saee; Gard, Tim; Tittgemeyer, Marc; Fleming, Stephen M; Haker, Helene; Seth, Anil K; Petzschner, Frederike H

2016-01-01

This paper outlines a hierarchical Bayesian framework for interoception, homeostatic/allostatic control, and meta-cognition that connects fatigue and depression to the experience of chronic dyshomeostasis. Specifically, viewing interoception as the inversion of a generative model of viscerosensory inputs allows for a formal definition of dyshomeostasis (as chronically enhanced surprise about bodily signals, or, equivalently, low evidence for the brain's model of bodily states) and allostasis (as a change in prior beliefs or predictions which define setpoints for homeostatic reflex arcs). Critically, we propose that the performance of interoceptive-allostatic circuitry is monitored by a metacognitive layer that updates beliefs about the brain's capacity to successfully regulate bodily states (allostatic self-efficacy). In this framework, fatigue and depression can be understood as sequential responses to the interoceptive experience of dyshomeostasis and the ensuing metacognitive diagnosis of low allostatic self-efficacy. While fatigue might represent an early response with adaptive value (cf. sickness behavior), the experience of chronic dyshomeostasis may trigger a generalized belief of low self-efficacy and lack of control (cf. learned helplessness), resulting in depression. This perspective implies alternative pathophysiological mechanisms that are reflected by differential abnormalities in the effective connectivity of circuits for interoception and allostasis. We discuss suitably extended models of effective connectivity that could distinguish these connectivity patterns in individual patients and may help inform differential diagnosis of fatigue and depression in the future.

Allostatic Self-efficacy: A Metacognitive Theory of Dyshomeostasis-Induced Fatigue and Depression

PubMed Central

Stephan, Klaas E.; Manjaly, Zina M.; Mathys, Christoph D.; Weber, Lilian A. E.; Paliwal, Saee; Gard, Tim; Tittgemeyer, Marc; Fleming, Stephen M.; Haker, Helene; Seth, Anil K.; Petzschner, Frederike H.

2016-01-01

This paper outlines a hierarchical Bayesian framework for interoception, homeostatic/allostatic control, and meta-cognition that connects fatigue and depression to the experience of chronic dyshomeostasis. Specifically, viewing interoception as the inversion of a generative model of viscerosensory inputs allows for a formal definition of dyshomeostasis (as chronically enhanced surprise about bodily signals, or, equivalently, low evidence for the brain's model of bodily states) and allostasis (as a change in prior beliefs or predictions which define setpoints for homeostatic reflex arcs). Critically, we propose that the performance of interoceptive-allostatic circuitry is monitored by a metacognitive layer that updates beliefs about the brain's capacity to successfully regulate bodily states (allostatic self-efficacy). In this framework, fatigue and depression can be understood as sequential responses to the interoceptive experience of dyshomeostasis and the ensuing metacognitive diagnosis of low allostatic self-efficacy. While fatigue might represent an early response with adaptive value (cf. sickness behavior), the experience of chronic dyshomeostasis may trigger a generalized belief of low self-efficacy and lack of control (cf. learned helplessness), resulting in depression. This perspective implies alternative pathophysiological mechanisms that are reflected by differential abnormalities in the effective connectivity of circuits for interoception and allostasis. We discuss suitably extended models of effective connectivity that could distinguish these connectivity patterns in individual patients and may help inform differential diagnosis of fatigue and depression in the future. PMID:27895566

Post-traumatic hypopituitarism and fatigue.

PubMed

Masel, Brent E; Zgaljardic, Dennis J; Forman, Jack

2017-10-01

Post-traumatic hypopituitarism (PTH) associated with chronic cognitive, psychiatric, and/or behavioural sequelae is common following moderate to severe traumatic brain injury (TBI). More specifically, due to a cascade of hormonal deficiencies secondary to PTH, individuals with TBI may experience debilitating fatigue that can negatively impact functional recovery, as it can limit participation in brain injury rehabilitation services and lead to an increase in maladaptive lifestyle practices. While the mechanisms underlying fatigue and TBI are not entirely understood, the current review will address the specific anatomy and physiology of the pituitary gland, as well as the association between pituitary dysfunction and fatigue in individuals with TBI.

Analysis and prediction of Multiple-Site Damage (MSD) fatigue crack growth

NASA Technical Reports Server (NTRS)

Dawicke, D. S.; Newman, J. C., Jr.

1992-01-01

A technique was developed to calculate the stress intensity factor for multiple interacting cracks. The analysis was verified through comparison with accepted methods of calculating stress intensity factors. The technique was incorporated into a fatigue crack growth prediction model and used to predict the fatigue crack growth life for multiple-site damage (MSD). The analysis was verified through comparison with experiments conducted on uniaxially loaded flat panels with multiple cracks. Configuration with nearly equal and unequal crack distribution were examined. The fatigue crack growth predictions agreed within 20 percent of the experimental lives for all crack configurations considered.

Foil system fatigue load environments for commercial hydrofoil operation

NASA Technical Reports Server (NTRS)

Graves, D. L.

1979-01-01

The hydrofoil fatigue loads environment in the open sea is examined. The random nature of wave orbital velocities, periods and heights plus boat heading, speed and control system design are considered in the assessment of structural fatigue requirements. Major nonlinear load events such as hull slamming and foil unwetting are included in the fatigue environment. Full scale rough water load tests, field experience plus analytical loads work on the model 929 Jetfoil commercial hydrofoil are discussed. The problem of developing an overall sea environment for design is defined. State of the art analytical approaches are examined.

High-cycle fatigue characterization of titanium 5Al-2.5Sn alloy

NASA Technical Reports Server (NTRS)

Mahfuz, H.; Xin, Yu T.; Jeelani, S.

1993-01-01

High-cycle fatigue behavior of titanium 5Al 2.5Sn alloy at room temperature has been studied. S-N curve characterization is performed at different stress ratios ranging from 0 to 0.9 on a subsized fatigue specimen. Both two-stress and three-stress level tests are conducted at different stress ratios to study the cumulative fatigue damage. Life prediction techniques of linear damage rule, double linear damage rule and damage curve approaches are applied, and results are compared with the experimental data. The agreement between prediction and experiment is found to be excellent.

Elevated temperature axial and torsional fatigue behavior of Haynes 188

NASA Astrophysics Data System (ADS)

Bonacuse, Peter J.; Kalluri, Sreeramesh

1992-06-01

The results of high-temperature axial and torsional low-cycle fatigue experiments performed on Haynes 188, a wrought cobalt-base superalloy, are reported. Fatigue tests were performed at 760 C in air on thin-walled tubular specimens at various ranges under strain control. Data are also presented for coefficient of thermal expansion, elastic modulus, and shear modulus at various temperatures from room to 1000 C, and monotonic and cyclic stress-strain curves in tension and in shear at 760 C. The data set is used to evaluate several multiaxial fatigue life models (most were originally developed for room temperature multiaxial life prediction) including von Mises equivalent strain range (ASME boiler and pressure vessel code), Manson-Halford, Modified Multiaxiality Factor (proposed here), Modified Smith-Watson-Topper, and Fatemi-Socie-Kurath. At von Mises equivalent strain ranges (the torsional strain range divided by the square root of 3, taking the Poisson's ratio to be 0.5), torsionally strained specimens lasted, on average, factors of 2 to 3 times longer than axially strained specimens. The Modified Multiaxiality Factor approach shows promise as a useful method of estimating torsional fatigue life from axial fatigue data at high temperatures. Several difficulties arose with the specimen geometry and extensometry used in these experiments. Cracking at extensometer probe indentations was a problem at smaller strain ranges. Also, as the largest axial and torsional strain range fatigue tests neared completion, a small amount of specimen buckling was observed.

Elevated temperature axial and torsional fatigue behavior of Haynes 188

NASA Technical Reports Server (NTRS)

Bonacuse, Peter J.; Kalluri, Sreeramesh

1992-01-01

The results of high-temperature axial and torsional low-cycle fatigue experiments performed on Haynes 188, a wrought cobalt-base superalloy, are reported. Fatigue tests were performed at 760 C in air on thin-walled tubular specimens at various ranges under strain control. Data are also presented for coefficient of thermal expansion, elastic modulus, and shear modulus at various temperatures from room to 1000 C, and monotonic and cyclic stress-strain curves in tension and in shear at 760 C. The data set is used to evaluate several multiaxial fatigue life models (most were originally developed for room temperature multiaxial life prediction) including von Mises equivalent strain range (ASME boiler and pressure vessel code), Manson-Halford, Modified Multiaxiality Factor (proposed here), Modified Smith-Watson-Topper, and Fatemi-Socie-Kurath. At von Mises equivalent strain ranges (the torsional strain range divided by the square root of 3, taking the Poisson's ratio to be 0.5), torsionally strained specimens lasted, on average, factors of 2 to 3 times longer than axially strained specimens. The Modified Multiaxiality Factor approach shows promise as a useful method of estimating torsional fatigue life from axial fatigue data at high temperatures. Several difficulties arose with the specimen geometry and extensometry used in these experiments. Cracking at extensometer probe indentations was a problem at smaller strain ranges. Also, as the largest axial and torsional strain range fatigue tests neared completion, a small amount of specimen buckling was observed.

Learning to live well with chronic fatigue: the personal perspective.

PubMed

Wilson, Lynere; Whitehead, Lisa; Burrell, Beverley

2011-10-01

Persistent fatigue is recognized as an integral and significantly disabling aspect of the experience of living with a long-term health condition. Acute medical care models have limited applicability when seeking to provide health care to meet the needs of those living with chronic fatigue. This article is a report of a study that sought to understand how people can live well in spite of the presence of chronic fatigue. A thematic analysis was conducted on 43 narratives provided by people living with chronic fatigue during 2007 as part of an internet-based study. This report focuses on the two themes that appeared of most relevance to participants: managing energy and redefining self. Two particular approaches to energy management were noted. In the first, the focus is upon moderating and avoiding excess to manage energy. In the second approach, the body was conceptualized as a machine so that energy becomes a limited resource to be managed. Work to redefine the sense of self appeared to be focused upon the desire to seek normality, to see oneself as rational and come to terms with change. People can and do find ways to live well with chronic fatigue. Understanding how the person with chronic fatigue has come to conceptualize his/her experiences will be a more fruitful starting point than providing recipes for successful living if nurses are to work effectively with this group of people. © 2011 Blackwell Publishing Ltd.

Truck driver fatigue assessment using a virtual reality system.

DOT National Transportation Integrated Search

2016-10-17

In this study, a fully immersive Virtual Reality (VR) based driving simulator was developed to serve : as a proof-of-concept that VR can be utilized to assess the level of fatigue (or drowsiness) truck : drivers typically experience during real...

Effects of Relaxing Music on Mental Fatigue Induced by a Continuous Performance Task: Behavioral and ERPs Evidence.

PubMed

Guo, Wei; Ren, Jie; Wang, Biye; Zhu, Qin

2015-01-01

The purpose of this study was to investigate whether listening to relaxing music would help reduce mental fatigue and to maintain performance after a continuous performance task. The experiment involved two fatigue evaluation phases carried out before and after a fatigue inducing phase. A 1-hour AX-continuous performance test was used to induce mental fatigue in the fatigue-inducing phase, and participants' subjective evaluation on the mental fatigue, as well as their neurobehavioral performance in a Go/NoGo task, were measured before and after the fatigue-inducing phase. A total of 36 undergraduate students (18-22 years) participated in the study and were randomly assigned to the music group and control group. The music group performed the fatigue-inducing task while listening to relaxing music, and the control group performed the same task without any music. Our results revealed that after the fatigue-inducing phase, (a) the music group demonstrated significantly less mental fatigue than control group, (b) reaction time significantly increased for the control group but not for the music group, (c) larger Go-P3 and NoGo-P3 amplitudes were observed in the music group, although larger NoGo-N2 amplitudes were detected for both groups. These results combined to suggest that listening to relaxing music alleviated the mental fatigue associated with performing an enduring cognitive-motor task.

Influence of stress systems and physical activity on different dimensions of fatigue in female fibromyalgia patients.

PubMed

Doerr, Johanna M; Fischer, Susanne; Nater, Urs M; Strahler, Jana

2017-02-01

Fatigue is a defining characteristic and one of the most debilitating features of fibromyalgia syndrome (FMS). The mechanisms underlying different dimensions of fatigue in FMS remain unclear. The aim of the current study was to test whether stress-related biological processes and physical activity modulate fatigue experience. Using an ambulatory assessment design, 26 female FMS patients reported general, mental, and physical fatigue levels at six time points per day for 14 consecutive days. Salivary cortisol and alpha-amylase were analyzed as markers of neuroendocrine functioning. Participants wore wrist actigraphs for the assessment of physical activity. Lower increases in cortisol after awakening predicted higher mean daily general and physical fatigue levels. Additionally, mean daily physical activity positively predicted next-day mean general fatigue. Levels of physical fatigue at a specific time point were positively associated with momentary cortisol levels. The increase in cortisol after awakening did not mediate the physical activity - fatigue relationship. There were no associations between alpha-amylase and fatigue. Our findings imply that both changes in hypothalamic-pituitary-adrenal axis activity and physical activity contribute to variance in fatigue in the daily lives of patients with FMS. This study helps to paint a clearer picture of the biological and behavioral underpinnings of fatigue in FMS and highlight the necessity of interdisciplinary treatment approaches targeting biological, behavioral and psychological aspects of FMS. Copyright © 2016 Elsevier Inc. All rights reserved.

What paramedics think about when they think about fatigue: contributing factors.

PubMed

Paterson, Jessica L; Sofianopoulos, Sarah; Williams, Brett

2014-04-01

Paramedic fatigue is associated with burnout, attrition, sick leave, work disability, physical and mental health complaints and impaired performance. However, no studies have addressed how fatigue is understood by paramedics. The present study addresses this shortcoming by exploring factors paramedics recognise as contributors to fatigue. Forty-nine (12F; 38 years ± 9.7 years) Australian paramedics completed a survey on perceived causes of performance impairing fatigue. A total of 107 responses were systematically coded following principles common to qualitative data analysis: data immersion, coding, categorisation and theme generation. Six themes emerged: working time, sleep, workload, health and well-being, work-life balance and environment. Consistent with a scientific understanding of fatigue, prior sleep and wake, time of day and task-related factors were often identified as contributing to fatigue. In other cases, paramedics' attributions deviated from a scientific understanding of direct causes of fatigue. These findings demonstrate that paramedics have a broad understanding of fatigue. It is critical to take this into account when discussing fatigue with paramedics, particularly in the case of fatigue education or wellness programmes. These data highlight areas for intervention and education to minimise the experience of paramedic fatigue and the negative health and safety outcomes for paramedics and patients as a result. © 2014 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Fatigue in Adolescents With Cancer Compared to Healthy Adolescents

PubMed Central

Daniel, Lauren C.; Brumley, Lauren D.; Schwartz, Lisa A.

2015-01-01

Background Cancer-related fatigue is one of the most pervasive and debilitating side-effects of cancer treatment and adolescents consistently rate cancer-related fatigue as one of the most distressing aspects of treatment. Because fatigue is also high in adolescents without cancer, the current study aims to describe fatigue in adolescents with cancer relative to a control group and to identify associates of such fatigue. Knowing this is important for understanding the extent of the problem in adolescents with cancer relative to healthy adolescents and for understanding who is most at risk for fatigue and related distress. Procedure Adolescents with cancer and their caregivers (n =102) and adolescents without a history of chronic health conditions and their caregivers (n =97) completed the Multidimensional Fatigue Scale and measures of depression, quality of life (QoL), affect, coping, and family functioning. Results Adolescents with cancer and their caregivers reported significantly more adolescent fatigue across all domains (with the exception of adolescent reports of cognitive fatigue) relative to adolescents without chronic health conditions. Higher fatigue was significantly related to adolescent report of more symptoms of depression, poorer QoL, higher negative affect, less positive affect, and behavioral disengagement coping style. Fatigue was not related to active coping or family functioning. Conclusions Adolescents with cancer experience significantly more fatigue than peers without chronic health conditions. Reports of fatigue are closely related to multiple indicators of psychosocial well-being, suggesting that fatigue may be an important cancer-related symptom to assess and manage to improve adolescent QoL. PMID:23897651

Helicopter Fatigue. A Review of Current Requirements and Substantiation Procedures

DTIC Science & Technology

1979-01-01

which the applications differ between contractors based cn their individual experience. Load Application: The ideal method of measuring flight loads would... method is different for the parts mainly dimensioned by high cycle fatigue (rotors and gearboxes) and for those subjected to low cycle fatigue (e.g...into damage per hour. Z.. A 58 2.3. Calculation of the service life Two methods are available, both with advantages and drawbacks. They only differ by

Associations Between Night Work and Anxiety, Depression, Insomnia, Sleepiness and Fatigue in a Sample of Norwegian Nurses

PubMed Central

Øyane, Nicolas M. F.; Pallesen, Ståle; Moen, Bente Elisabeth; Åkerstedt, Torbjörn; Bjorvatn, Bjørn

2013-01-01

Background Night work has been reported to be associated with various mental disorders and complaints. We investigated relationships between night work and anxiety, depression, insomnia, sleepiness and fatigue among Norwegian nurses. Methods The study design was cross-sectional, based on validated self-assessment questionnaires. A total of 5400 nurses were invited to participate in a health survey through the Norwegian Nurses' Organization, whereof 2059 agreed to participate (response rate 38.1%). Nurses completed a questionnaire containing items on demographic variables (gender, age, years of experience as a nurse, marital status and children living at home), work schedule, anxiety/depression (Hospital Anxiety and Depression Scale), insomnia (Bergen Insomnia Scale), sleepiness (Epworth Sleepiness Scale) and fatigue (Fatigue Questionnaire). They were also asked to report number of night shifts in the last 12 months (NNL). First, the parameters were compared between nurses i) never working nights, ii) currently working nights, and iii) previously working nights, using binary logistic regression analyses. Subsequently, a cumulative approach was used investigating associations between NNL with the continuous scores on the same dependent variables in hierarchical multiple regression analyses. Results Nurses with current night work were more often categorized with insomnia (OR = 1.48, 95% CI = 1.10–1.99) and chronic fatigue (OR = 1.78, 95% CI = 1.02–3.11) than nurses with no night work experience. Previous night work experience was also associated with insomnia (OR = 1.45, 95% CI = 1.04–2.02). NNL was not associated with any parameters in the regression analyses. Conclusion Nurses with current or previous night work reported more insomnia than nurses without any night work experience, and current night work was also associated with chronic fatigue. Anxiety, depression and sleepiness were not associated with night work, and no cumulative effect of night shifts during the last 12 months was found on any parameters. PMID:23950914

Compression fatigue behavior and failure mechanism of porous titanium for biomedical applications.

PubMed

Li, Fuping; Li, Jinshan; Huang, Tingting; Kou, Hongchao; Zhou, Lian

2017-01-01

Porous titanium and its alloys are believed to be one of the most attractive biomaterials for orthopedic implant applications. In the present work, porous pure titanium with 50-70% porosity and different pore size was fabricated by diffusion bonding. Compression fatigue behavior was systematically studied along the out-of-plane direction. It resulted that porous pure titanium has anisotropic pore structure and the microstructure is fine-grained equiaxed α phase with a few twins in some α grains. Porosity and pore size have some effect on the S-N curve but this effect is negligible when the fatigue strength is normalized by the yield stress. The relationship between normalized fatigue strength and fatigue life conforms to a power law. The compression fatigue behavior is characteristic of strain accumulation. Porous titanium experiences uniform deformation throughout the entire sample when fatigue cycle is lower than a critical value (N T ). When fatigue cycles exceed N T , strain accumulates rapidly and a single collapse band forms with a certain angle to the loading direction, leading to the sudden failure of testing sample. Both cyclic ratcheting and fatigue crack growth contribute to the fatigue failure mechanism, while the cyclic ratcheting is the dominant one. Porous titanium possesses higher normalized fatigue strength which is in the range of 0.5-0.55 at 10 6 cycles. The reasons for the higher normalized fatigue strength were analyzed based on the microstructure and fatigue failure mechanism. Copyright © 2016 Elsevier Ltd. All rights reserved.

An Assessment of Cumulative Axial and Torsional Fatigue in a Cobalt-Base Superalloy

NASA Technical Reports Server (NTRS)

Kalluri, Sreeramesh; Bonacuse, Peter J.

2010-01-01

Cumulative fatigue under axial and torsional loading conditions can include both load-order (higMow and low/high) as well as load-type sequence (axial/torsional and torsional/axial) effects. Previously reported experimental studies on a cobalt-base superalloy, Haynes 188 at 538 C, addressed these effects. These studies characterized the cumulative axial and torsional fatigue behavior under high amplitude followed by low amplitude (Kalluri, S. and Bonacuse, P. J., "Cumulative Axial and Torsional Fatigue: An Investigation of Load-Type Sequance Effects," in Multiaxial Fatigue and Deformation: Testing and Prediction, ASTM STP 1387, S. Kalluri, and P. J. Bonacuse, Eds., American Society for Testing and Materials, West Conshohocken, PA, 2000, pp. 281-301) and low amplitude followed by high amplitude (Bonacuse, P. and Kalluri, S. "Sequenced Axial and Torsional Cumulative Fatigue: Low Amplitude Followed by High Amplitude Loading," Biaxial/Multiaxial Fatigue and Fracture, ESIS Publication 31, A. Carpinteri, M. De Freitas, and A. Spagnoli, Eds., Elsevier, New York, 2003, pp. 165-182) conditions. In both studies, experiments with the following four load-type sequences were performed: (a) axial/axial, (b) torsional/torsional, (c) axial/torsional, and (d) torsional/axial. In this paper, the cumulative axial and torsional fatigue data generated in the two previous studies are combined to generate a comprehensive cumulative fatigue database on both the load-order and load-type sequence effects. This comprehensive database is used to examine applicability of the Palmgren-langer-Miner linear damage rule and a nonlinear damage curve approach for Haynes 188 subjected to the load-order and load-type sequencing described above. Summations of life fractions from the experiments are compared to the predictions from both the linear and nonlinear cumulative fatigue damage approaches. The significance of load-order versus load-type sequence effects for axial and torsional loading conditions is discussed. Possible reasons for the observed differences between the computed and observed summations of cycle fractions are rationalized in terms of the observed ever lutions of cyclic axial and shear stress ranges in the cumulative fatigue tests.

Modelling and Laboratory Studies on the Adhesion Fatigue Performance for Thin-Film Asphalt and Aggregate System

PubMed Central

Wang, Dongsheng; Feng, Decheng

2014-01-01

Adhesion between asphalt and aggregate plays an important role in the performance of asphalt mixtures. A low-frequency adhesion fatigue test was proposed in this paper to study the effect of environment on the asphalt-aggregate adhesion system. The stress-based fatigue model had been utilized to describe the fatigue behavior of thin-film asphalt and aggregate system. The factors influencing the adhesion fatigue performance were also investigated. Experiment results show that asphalt has more important effect on the adhesion performance comparing with aggregate. Basalt, which is regarded as hydrophobic aggregates with low silica content, has better adhesion performance to asphalt binder when compared with granite. The effects of aging on the adhesion fatigue performance are different for PG64-22 and rubber asphalt. Long-term aging is found to reduce the adhesion fatigue lives for rubber asphalt and aggregate system, while the effect of long-term aging for aggregate and PG64-22 binder system is positive. Generally the increased stress amplitude and test temperature could induce greater damage and lead to less fatigue lives for adhesion test system. PMID:25054187

Modelling and laboratory studies on the adhesion fatigue performance for thin-film asphalt and aggregate system.

PubMed

Wang, Dongsheng; Yi, Junyan; Feng, Decheng

2014-01-01

Adhesion between asphalt and aggregate plays an important role in the performance of asphalt mixtures. A low-frequency adhesion fatigue test was proposed in this paper to study the effect of environment on the asphalt-aggregate adhesion system. The stress-based fatigue model had been utilized to describe the fatigue behavior of thin-film asphalt and aggregate system. The factors influencing the adhesion fatigue performance were also investigated. Experiment results show that asphalt has more important effect on the adhesion performance comparing with aggregate. Basalt, which is regarded as hydrophobic aggregates with low silica content, has better adhesion performance to asphalt binder when compared with granite. The effects of aging on the adhesion fatigue performance are different for PG64-22 and rubber asphalt. Long-term aging is found to reduce the adhesion fatigue lives for rubber asphalt and aggregate system, while the effect of long-term aging for aggregate and PG64-22 binder system is positive. Generally the increased stress amplitude and test temperature could induce greater damage and lead to less fatigue lives for adhesion test system.

Comparison of algorithms to quantify muscle fatigue in upper limb muscles based on sEMG signals.

PubMed

Kahl, Lorenz; Hofmann, Ulrich G

2016-11-01

This work compared the performance of six different fatigue detection algorithms quantifying muscle fatigue based on electromyographic signals. Surface electromyography (sEMG) was obtained by an experiment from upper arm contractions at three different load levels from twelve volunteers. Fatigue detection algorithms mean frequency (MNF), spectral moments ratio (SMR), the wavelet method WIRM1551, sample entropy (SampEn), fuzzy approximate entropy (fApEn) and recurrence quantification analysis (RQA%DET) were calculated. The resulting fatigue signals were compared considering the disturbances incorporated in fatiguing situations as well as according to the possibility to differentiate the load levels based on the fatigue signals. Furthermore we investigated the influence of the electrode locations on the fatigue detection quality and whether an optimized channel set is reasonable. The results of the MNF, SMR, WIRM1551 and fApEn algorithms fell close together. Due to the small amount of subjects in this study significant differences could not be found. In terms of disturbances the SMR algorithm showed a slight tendency to out-perform the others. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

A two-parameter model to predict fatigue life of high-strength steels in a very high cycle fatigue regime

NASA Astrophysics Data System (ADS)

Sun, Chengqi; Liu, Xiaolong; Hong, Youshi

2015-06-01

In this paper, ultrasonic (20 kHz) fatigue tests were performed on specimens of a high-strength steel in very high cycle fatigue (VHCF) regime. Experimental results showed that for most tested specimens failed in a VHCF regime, a fatigue crack originated from the interior of specimen with a fish-eye pattern, which contained a fine granular area (FGA) centered by an inclusion as the crack origin. Then, a two-parameter model is proposed to predict the fatigue life of high-strength steels with fish-eye mode failure in a VHCF regime, which takes into account the inclusion size and the FGA size. The model was verified by the data of present experiments and those in the literature. Furthermore, an analytic formula was obtained for estimating the equivalent crack growth rate within the FGA. The results also indicated that the stress intensity factor range at the front of the FGA varies within a small range, which is irrespective of stress amplitude and fatigue life.

Experimental Research on Fatigue Failure for 2219-T6 Aluminum Alloy Friction Stir-Welded Joints

NASA Astrophysics Data System (ADS)

Sun, Guo-Qin; Niu, Jiang-Pei; Chen, Ya-Jing; Sun, Feng-Yang; Shang, De-Guang; Chen, Shu-Jun

2017-08-01

The fatigue experiment was executed for the 2219-T6 aluminum alloy friction stir-welded joints at the rotation speed of 800 r/min and the welding velocity of 150 mm/min. Most fatigue failures occurred in the weld nugget zone (WNZ), the thermo-mechanical affected zone and the nearby areas. The experimental results demonstrated that the sudden hardness gradient increases sites corresponding to the fatigue failure locations. The high-angle grain boundaries with the highest concentration were scattered within the WNZ. The microcracks initiated at the intersection of the soft grains. More than one crack initiation site was observed within the WNZ and the thermo-mechanical affected zone, when the fracture occurred in these areas. The rough surface of the welding area should be one of the main reasons for the fatigue failure occurrence. The fatigue crack growth rate in the WNZ at the first stage was fastest in comparison with the fatigue crack growth rate in the other areas of the joint.

Variable amplitude fatigue crack growth characteristics of railroad tank car steel volume III

DOT National Transportation Integrated Search

2006-12-01

The load history that railroad tank cars experience has a significant variable amplitude characteristic. Although previous efforts have been directed toward understanding baseline fatigue crack growth behavior of TC-128B steel as a function of materi...

Have restricted working hours reduced junior doctors’ experience of fatigue? A focus group and telephone interview study

PubMed Central

Morrow, Gill; Burford, Bryan; Carter, Madeline; Illing, Jan

2014-01-01

Objective To explore the effects of the UK Working Time Regulations (WTR) on trainee doctors’ experience of fatigue. Design Qualitative study involving focus groups and telephone interviews, conducted in Spring 2012 with doctors purposively selected from Foundation and specialty training. Final compliance with a 48 h/week limit had been required for trainee doctors since August 2009. Framework analysis of data. Setting 9 deaneries in all four UK nations; secondary care. Participants 82 doctors: 53 Foundation trainees and 29 specialty trainees. 36 participants were male and 46 female. Specialty trainees were from a wide range of medical and surgical specialties, and psychiatry. Results Implementation of the WTR, while acknowledged as an improvement to the earlier situation of prolonged excessive hours, has not wholly overcome experience of long working hours and fatigue. Fatigue did not only arise from the hours that were scheduled, but also from an unpredictable mixture of shifts, work intensity (which often resulted in educational tasks being taken home) and inadequate rest. Fatigue was also caused by trainees working beyond their scheduled hours, for reasons such as task completion, accessing additional educational opportunities beyond scheduled hours and staffing shortages. There were also organisational, professional and cultural drivers, such as a sense of responsibility to patients and colleagues and the expectations of seniors. Fatigue was perceived to affect efficiency of skills and judgement, mood and learning capacity. Conclusions Long-term risks of continued stress and fatigue, for doctors and for the effective delivery of a healthcare service, should not be ignored. Current monitoring processes do not reflect doctors’ true working patterns. The effectiveness of the WTR cannot be considered in isolation from the culture and context of the workplace. On-going attention needs to be paid to broader cultural issues, including the relationship between trainees and seniors. PMID:24604482

The effect of external non-driving factors, payment type and waiting and queuing on fatigue in long distance trucking.

PubMed

Williamson, Ann; Friswell, Rena

2013-09-01

The aim of this study was to explore the effects of external influences on long distance trucking, in particular, incentive-based remuneration systems and the need to wait or queue to load or unload on driver experiences of fatigue. Long distance truck drivers (n=475) were recruited at truck rest stops on the major transport corridors within New South Wales, Australia and asked to complete a survey by self-administration or interview. The survey covered demographics, usual working arrangements, details of the last trip and safety outcomes including fatigue experiences. On average drivers' last trip was over 2000 km and took 21.5 h to complete with an additional 6h of non-driving work. Incentive payments were associated with longer working hours, greater distances driven and higher fatigue for more drivers. Drivers required to wait in queues did significantly more non-driving work and experienced fatigue more often than those who did not. Drivers who were not paid to wait did the longest trips with average weekly hours above the legal working hours limits, had the highest levels of fatigue and the highest levels of interference by work with family life. In contrast, drivers who were paid to wait did significantly less work with shorter usual hours and shorter last trips. Multivariate analysis showed that incentive-based payment and unpaid waiting in queues were significant predictors of driver fatigue. The findings suggest that mandating payment of drivers for non-driving work including waiting would reduce the amount of non-driving work required for drivers and reduce weekly hours of work. In turn this would reduce driver fatigue and safety risk as well as enhancing the efficiency of the long distance road transport industry. Copyright © 2013 Elsevier Ltd. All rights reserved.

Research on fatigue driving pre-warning system based on multi-information fusion

NASA Astrophysics Data System (ADS)

Zhao, Xuyang; Ye, Wenwu

2018-05-01

With the development of science and technology, transportation network has grown faster. But at the same time, the quantity of traffic accidents due to fatigue driving grows faster as well. In the meantime, fatigue driving has been one of the main causes of traffic accidents. Therefore, it is indispensable for us to study the detection of fatigue driving to help to driving safety. There are numerous approaches in discrimination method. Each type of method has its reasonable theoretical basis, but the disadvantages of traditional fatigue driving detection methods have been more and more obvious since we study the traditional physiology and psychological features of fatigue drivers. So we set up a new system based on multi-information fusion and pattern recognition theory. In the paper, the fatigue driving pre-warning system discriminates fatigue by analyzing the characteristic parameters, the parameters derived from the steering wheel angle, the driver's power of gripping and the heart rate. And the data analysis system is established based on fuzzy C-means clustering theory. Finally, KNN classifier is used to establish the relation between feature indexes and fatigue degree. It is verified that the system has the better accuracy, agility and robustness according to our confirmatory experiment.

Hearing Handicap and Speech Recognition Correlate With Self-Reported Listening Effort and Fatigue.

PubMed

Alhanbali, Sara; Dawes, Piers; Lloyd, Simon; Munro, Kevin J

To investigate the correlations between hearing handicap, speech recognition, listening effort, and fatigue. Eighty-four adults with hearing loss (65 to 85 years) completed three self-report questionnaires: the Fatigue Assessment Scale, the Effort Assessment Scale, and the Hearing Handicap Inventory for Elderly. Audiometric assessment included pure-tone audiometry and speech recognition in noise. There was a significant positive correlation between handicap and fatigue (r = 0.39, p < 0.05) and handicap and effort (r = 0.73, p < 0.05). There were significant (but lower) correlations between speech recognition and fatigue (r = 0.22, p < 0.05) or effort (r = 0.32, p< 0.05). There was no significant correlation between hearing level and fatigue or effort. Hearing handicap and speech recognition both correlate with self-reported listening effort and fatigue, which is consistent with a model of listening effort and fatigue where perceived difficulty is related to sustained effort and fatigue for unrewarding tasks over which the listener has low control. A clinical implication is that encouraging clients to recognize and focus on the pleasure and positive experiences of listening may result in greater satisfaction and benefit from hearing aid use.

Personalized, bilateral whole-body somatosensory cortex stimulation to relieve fatigue in multiple sclerosis.

PubMed

Cancelli, Andrea; Cottone, Carlo; Giordani, Alessandro; Migliore, Simone; Lupoi, Domenico; Porcaro, Camillo; Mirabella, Massimiliano; Rossini, Paolo Maria; Filippi, Maria Maddalena; Tecchio, Franca

2017-07-01

The patients suffering from multiple sclerosis (MS) often consider fatigue the most debilitating symptom they experience, but conventional medicine currently offers poorly efficacious therapies. We executed a replication study of an innovative approach for relieving MS fatigue. According to the sample size estimate, we recruited 10 fatigued MS patients who received 5-day transcranial direct current stimulation (tDCS) in a randomized, double-blind, Sham-controlled, crossover study, with modified Fatigue Impact Scale (mFIS) score reduction at the end of the treatment as primary outcome. A personalized anodal electrode, shaped on the magnetic resonance imaging (MRI)-derived individual cortical folding, targeted the bilateral whole-body primary somatosensory cortex (S1) with an occipital cathode. The amelioration of fatigue symptoms after Real stimulation (40% of baseline) was significantly larger than after Sham stimulation (14%, p = 0.012). Anodal whole body S1 induced a significant fatigue reduction in mildly disabled MS patients when the fatigue-related symptoms severely hampered their quality of life. This second result in an independent group of patients supports the idea that neuromodulation interventions that properly select a personalized target might be a suitable non-pharmacological treatment for MS fatigue.

Effect of Spring-in Deviation on Fatigue Life of Composite Elevator Assembly

NASA Astrophysics Data System (ADS)

Wang, Hua

2017-12-01

The spring-in deviation results in the extra stresses around the joints of the composite C-beam and metallic parts when they are assembled together. These extra stresses affect the composite elevator's fatigue life, which should be explored with the fatigue experimentation. The paper presents the experimental investigation on the effect of spring-in deviation on the fatigue life of the composite elevator assembly. The investigation seeks to build the relationship between the spring-in and the fatigue life in order to determine the spring-in threshold during the course of assembling. The phenomenological model of the composite C-beam is constructed to predict the stresses around the joints. Based on the predicted spring-in induced stresses around the joints, pre-stresses are precisely added to the fatigue specimen when conducting the fatigue experiment. At last, the relationship curve of the spring-in on the composite C-beam's fatigue life is obtained from the experimental data. Giving the fatigue life accepting limits, the maximum accepting spring-in deviation during the course of assembling could be obtained from the relationship curve. The reported work will enhance the understanding of assembling the composites with spring-in deviation in the civil aircraft industry.

Investigation on the Effect of Initial Welding Imperfection on Fatigue strength of Tubular Member by FEM

NASA Astrophysics Data System (ADS)

Chang, Kyong-Ho; Shin, Wang Sub; Nguyen Van Vuong, Do; Lee, Chin Hyeong

2018-04-01

Steel tube structure is used for steel structure such as offshore platform, bridges and so on. Also, all circular members of tubular structures are mainly connected by welding. When the steel tubular structures are subjected to repeated loading, not only the load carrying capacity is reduced but also fatigue cracks may develop at the joint part of steel tubular members which are connected by welding. Carrying out welding, welding initial imperfection such as welding deformation and residual stress are inevitably generated at weld part. It was well known that the effect of welding residual and welding deformation on fatigue strength. However, It’s not clear which affects fatigue strength more. However, it’s difficult to clear the effect on fatigue strength by experiment. To clarify these effect, fatigue analysis was carried out by FEM which is based on continuum damage mechanics. On the other hand, coupled three-dimensional non-steady heat conduction analysis, and the thermal elastic-plastic analysis was carried out to reproduce the initial weld state of tubular member. From the result, not only the fatigue strength of welded tubular member but also the fatigue life could be found by FEM fatigue analysis.

Evaluation of Giga-cycle Fatigue Properties of Austenitic Stainless Steels Using Ultrasonic Fatigue Test

NASA Astrophysics Data System (ADS)

Takahashi, Kyouhei; Ogawa, Takeshi

Ultrasonic fatigue tests have been performed in austenitic stainless steel, SUS316NG, in order to investigate giga-cycle fatigue strength of pre-strained materials, i.e. 5, 10 and 20% tensile pre-strains and -20% compressive pre-strain. The pre-strains were applied before specimen machining. The austenitic stainless steels are known to exhibit remarkable self-heating during the fatigue experiment. Therefore, heat radiation method was established by setting fatigue specimens in a low temperature chamber at about -100°C. The self-heating was controlled by intermittent loading condition, which enabled us to maintain the test section of the specimens at about room temperature. The results revealed that the fatigue strength increased with increasing pre-strain levels. Fish-eye fracture was observed for -20% pre-strained specimen fractured at 4.11×107 cycles, while the other specimens exhibited ordinary fatigue fracture surface originated from stage I facet on the specimen surface. The increase in fatigue limit was predicted by Vickers hardness, HV, which depended on the size of indented region. The prediction was successful using HV values obtained by the size of the indented region similar to those of the stage I facets.

a Study on the Fretting Fatigue Life of Zircaloy Alloys

NASA Astrophysics Data System (ADS)

Kwon, Jae-Do; Park, Dae-Kyu; Woo, Seung-Wan; Chai, Young-Suck

Studies on the strength and fatigue life of machines and structures have been conducted in accordance with the development of modern industries. In particular, fine and repetitive cyclic damage occurring in contact regions has been known to have an impact on fretting fatigue fractures. The main component of zircaloy alloy is Zr, and it possesses good mechanical characteristics at high temperatures. This alloy is used in the fuel rod material of nuclear power plants because of its excellent resistance. In this paper, the effect of the fretting damage on the fatigue behavior of the zircaloy alloy is studied. Further, various types of mechanical tests such as tension and plain fatigue tests are performed. Fretting fatigue tests are performed with a flat-flat contact configuration using a bridge-type contact pad and plate-type specimen. Through these experiments, it is found that the fretting fatigue strength decreases by about 80% as compared to the plain fatigue strength. Oblique cracks are observed in the initial stage of the fretting fatigue, in which damaged areas are found. These results can be used as the basic data for the structural integrity evaluation of corrosion-resisting alloys considering the fretting damages.

Feasibility of Fuel Cell APUs for Automotive Applications

DTIC Science & Technology

2005-12-07

6TMF, and VRLA. The first battery to be used was the 6TN battery. This battery was a lead- acid chemistry with antimony used as the hardening alloy for...to maintain the battery, and the need to add water on an almost constant basis. Water was needed in a lea~- acid battery to charge the battery. Even...began to transition into calcium instead of antimony to support the lead in the battery. Antimony is a very toxic material, and along with the acid

Myoelectrical Manifestation of Fatigue Less Prominent in Patients with Cancer Related Fatigue

PubMed Central

Kisiel-Sajewicz, Katarzyna; Siemionow, Vlodek; Seyidova-Khoshknabi, Dilara; Davis, Mellar P.; Wyant, Alexandria; Ranganathan, Vinoth K.; Walsh, Declan; Yan, Jin H.; Hou, Juliet; Yue, Guang H.

2013-01-01

Purpose A lack of fatigue-related muscle contractile property changes at time of perceived physical exhaustion and greater central than peripheral fatigue detected by twitch interpolation technique have recently been reported in cancer survivors with fatigue symptoms. Based on these observations, it was hypothesized that compared to healthy people, myoelectrical manifestation of fatigue in the performing muscles would be less significant in these individuals while sustaining a prolonged motor task to self-perceived exhaustion (SPE) since their central fatigue was more prominent. The purpose of this study was to test this hypothesis by examining electromyographic (EMG) signal changes during fatiguing muscle performance. Methods Twelve individuals who had advanced solid cancer and cancer-related fatigue (CRF), and 12 age- and gender-matched healthy controls performed a sustained elbow flexion at 30% maximal voluntary contraction till SPE. Amplitude and mean power frequency (MPF) of EMG signals of the biceps brachii, brachioradialis, and triceps brachii muscles were evaluated when the individuals experienced minimal, moderate, and severe fatigue. Results CRF patients perceived physical “exhaustion” significantly sooner than the controls. The myoelectrical manifestation of muscular fatigue assessed by EMG amplitude and MPF was less significant in CRF than controls. The lower MPF even at minimal fatigue stage in CRF may indicate pathophysiologic condition of the muscle. Conclusions CRF patients experience less myoelectrical manifestation of muscle fatigue than healthy individuals near the time of SPE. The data suggest that central nervous system fatigue plays a more important role in limiting endurance-type of motor performance in patients with CRF. PMID:24391800

Exploring the experience of sleep and fatigue in male and female adults over the 2 years following traumatic brain injury: a qualitative descriptive study.

PubMed

Theadom, Alice; Rowland, Vickie; Levack, William; Starkey, Nicola; Wilkinson-Meyers, Laura; McPherson, Kathryn

2016-04-08

To explore the experience of fatigue and sleep difficulties over the first 2 years after traumatic brain injury (TBI). Longitudinal qualitative descriptive analysis of interviews completed as part of a larger longitudinal study of recovery following TBI. Data relating to the experience of fatigue and/or sleep were extracted and coded by two independent researchers. Community-based study in the Hamilton and Auckland regions of New Zealand. 30 adult participants who had experienced mild, moderate or severe brain injury within the past 6 months (>16 years of age). 15 participants also nominated significant others to take part. Interviews were completed at 6, 12 and 24 months postinjury. Participants described feeling unprepared for the intensity, impact and persistent nature of fatigue and sleep difficulties after injury. They struggled to learn how to manage their difficulties by themselves and to adapt strategies in response to changing circumstances over time. Four themes were identified: (1) Making sense of fatigue and sleep after TBI; (2) accepting the need for rest; (3) learning how to rest and; (4) need for rest impacts on ability to engage in life. Targeted support to understand, accept and manage the sleep and fatigue difficulties experienced may be crucial to improve recovery and facilitate engagement in everyday life. Advice needs to be timely and revised for relevance over the course of recovery. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Psychosocial Work Stressors, Work Fatigue, and Musculoskeletal Disorders: Comparison between Emergency and Critical Care Nurses in Brunei Public Hospitals.

PubMed

Abdul Rahman, Hanif; Abdul-Mumin, Khadizah; Naing, Lin

2017-03-01

Little evidence estimated the exposure of psychosocial work stressors, work-related fatigue, and musculoskeletal disorders for nurses working in South-East Asian region, and research on this subject is almost nonexistent in Brunei. The main aim of our study was to provide a comprehensive exploration and estimate exposure of the study variables amongst emergency (ER) and critical care (CC) nurses in Brunei. The study also aims to compare whether experiences of ER nurses differ from those of CC nurses. This cross-sectional study was implemented in the ER and CC departments across Brunei public hospitals from February to April 2016 by using Copenhagen Psychosocial Questionnaire II, Occupational Fatigue Exhaustion Recovery scale, and Cornell Musculoskeletal Discomfort Questionnaire. In total, 201 ER and CC nurses (82.0% response rate) participated in the study. Quantitative demands of CC nurses were significantly higher than ER nurses. Even so, ER nurses were 4.0 times more likely [95% confidence interval (2.21, 7.35)] to experience threats of violence, and 2.8 times more likely [95% confidence interval: (1.50, 5.29)] to experience chronic fatigue. The results revealed that nurses experienced high quantitative demands, work pace, stress, and burnout. High prevalence of chronic and persistent fatigue, threats of violence and bullying, and musculoskeletal pain at the neck, shoulder, upper and lower back, and foot region, was also reported. This study has provided good estimates for the exposure rate of psychosocial work stressors, work-related fatigue, and musculoskeletal disorders among nurses in Brunei. It provided important initial insight for nursing management and policymakers to make informed decisions on current and future planning to provide nurses with a conducive work environment. Copyright © 2017. Published by Elsevier B.V.

The influence of temperature on fatigue-crack growth in a mill-annealed Ti-6Al-4V alloy

NASA Technical Reports Server (NTRS)

Wei, R. P.; Ritter, D. L.

1971-01-01

To understand the influence of temperature on the rate of fatigue crack growth in high strength metal alloys, constant load amplitude fatigue crack growth experiments were carried out using a 1/4 inch thick (6.35 mm) mill-annealed Ti-6Al-4V alloy plate as a model material. The rates of fatigue crack growth were determined as a function of temperature, ranging from room temperature to about 290 C and as a function of the crack tip, stress intensity factor K, in dehumidified high purity argon environment. The dependence of the rate of fatigue crack growth on K appears to be separable into two regions. The transition correlates with changes in both the microscopic and macroscopic appearances of the fracture surfaces, and suggests a change in the mechanism and the influence of microstructure on fatigue crack growth.

Corrosion and corrosion fatigue of airframe aluminum alloys

NASA Technical Reports Server (NTRS)

Chen, G. S.; Gao, M.; Harlow, D. G.; Wei, R. P.

1994-01-01

Localized corrosion and corrosion fatigue crack nucleation and growth are recognized as degradation mechanisms that effect the durability and integrity of commercial transport aircraft. Mechanically based understanding is needed to aid the development of effective methodologies for assessing durability and integrity of airframe components. As a part of the methodology development, experiments on pitting corrosion, and on corrosion fatigue crack nucleation and early growth from these pits were conducted. Pitting was found to be associated with constituent particles in the alloys and pit growth often involved coalescence of individual particle-nucleated pits, both laterally and in depth. Fatigue cracks typically nucleated from one of the larger pits that formed by a cluster of particles. The size of pit at which fatigue crack nucleates is a function of stress level and fatigue loading frequency. The experimental results are summarized, and their implications on service performance and life prediction are discussed.

Characterization of the temperature evolution during high-cycle fatigue of the ULTIMET superalloy: Experiment and theoretical modeling

NASA Astrophysics Data System (ADS)

Jiang, L.; Wang, H.; Liaw, P. K.; Brooks, C. R.; Klarstrom, D. L.

2001-09-01

High-speed, high-resolution infrared thermography, as a noncontact, full-field, and nondestructive technique, was used to study the temperature variations of a cobalt-based ULTIMET alloy subjected to high-cycle fatigue. During each fatigue cycle, the temperature oscillations, which were due to the thermal-elastic-plastic effects, were observed and related to stress-strain analyses. A constitutive model was developed for predicting the thermal and mechanical responses of the ULTIMET alloy subjected to cyclic deformation. The model was constructed in light of internal-state variables, which were developed to characterize the inelastic strain of the material during cyclic loading. The predicted stress-strain and temperature responses were found to be in good agreement with the experimental results. In addition, the change of temperature during fatigue was employed to reveal the accumulation of fatigue damage, and the measured temperature was utilized as an index for fatigue-life prediction.

Prediction of Fatigue Crack Growth in Gas Turbine Engine Blades Using Acoustic Emission

PubMed Central

Zhang, Zhiheng; Yang, Guoan; Hu, Kun

2018-01-01

Fatigue failure is the main type of failure that occurs in gas turbine engine blades and an online monitoring method for detecting fatigue cracks in blades is urgently needed. Therefore, in this present study, we propose the use of acoustic emission (AE) monitoring for the online identification of the blade status. Experiments on fatigue crack propagation based on the AE monitoring of gas turbine engine blades and TC11 titanium alloy plates were conducted. The relationship between the cumulative AE hits and the fatigue crack length was established, before a method of using the AE parameters to determine the crack propagation stage was proposed. A method for predicting the degree of crack propagation and residual fatigue life based on the AE energy was obtained. The results provide a new method for the online monitoring of cracks in the gas turbine engine blade. PMID:29693556

The Regularities of Fatigue Crack Growth in Airframes Elements at Real Operation Conditions

NASA Astrophysics Data System (ADS)

Pavelko, Igors; Pavelko, Vitalijs

The results of analytical and experimental researches concerning predicting of fatigue crack growth in the operating conditions are presented. First of all the main factors causing a fatigue damage initiation and growth are analyzed and divided to two groups. Common conditions of fatigue damage precise predicting are established. The problem of fatigue crack growth at the stresses of variable amplitude was analyzed and an approach of description of this process is performed. Two examples present the efficiency of this approach. Theory of fatigue crack growth indication and the crack growth indicator (CGI) are developed. There is planned and executed a flight experiment using CGI located on two aircraft An-24 and An-26. Results of crack growth in CGI at operational load allowed to evaluate the parameters of generalized Paris-Erdogan law and statistical properties of crack increment per flight.

Prediction of Fatigue Crack Growth in Gas Turbine Engine Blades Using Acoustic Emission.

PubMed

Zhang, Zhiheng; Yang, Guoan; Hu, Kun

2018-04-25

Fatigue failure is the main type of failure that occurs in gas turbine engine blades and an online monitoring method for detecting fatigue cracks in blades is urgently needed. Therefore, in this present study, we propose the use of acoustic emission (AE) monitoring for the online identification of the blade status. Experiments on fatigue crack propagation based on the AE monitoring of gas turbine engine blades and TC11 titanium alloy plates were conducted. The relationship between the cumulative AE hits and the fatigue crack length was established, before a method of using the AE parameters to determine the crack propagation stage was proposed. A method for predicting the degree of crack propagation and residual fatigue life based on the AE energy was obtained. The results provide a new method for the online monitoring of cracks in the gas turbine engine blade.

Empirical modeling of environment-enhanced fatigue crack propagation in structural alloys for component life prediction

NASA Technical Reports Server (NTRS)

Richey, Edward, III

1995-01-01

This research aims to develop the methods and understanding needed to incorporate time and loading variable dependent environmental effects on fatigue crack propagation (FCP) into computerized fatigue life prediction codes such as NASA FLAGRO (NASGRO). In particular, the effect of loading frequency on FCP rates in alpha + beta titanium alloys exposed to an aqueous chloride solution is investigated. The approach couples empirical modeling of environmental FCP with corrosion fatigue experiments. Three different computer models have been developed and incorporated in the DOS executable program. UVAFAS. A multiple power law model is available, and can fit a set of fatigue data to a multiple power law equation. A model has also been developed which implements the Wei and Landes linear superposition model, as well as an interpolative model which can be utilized to interpolate trends in fatigue behavior based on changes in loading characteristics (stress ratio, frequency, and hold times).

Ratcheting fatigue behavior of Zircaloy-2 at room temperature

NASA Astrophysics Data System (ADS)

Rajpurohit, R. S.; Sudhakar Rao, G.; Chattopadhyay, K.; Santhi Srinivas, N. C.; Singh, Vakil

2016-08-01

Nuclear core components of zirconium alloys experience asymmetric stress or strain cycling during service which leads to plastic strain accumulation and drastic reduction in fatigue life as well as dimensional instability of the component. Variables like loading rate, mean stress, and stress amplitude affect the influence of asymmetric loading. In the present investigation asymmetric stress controlled fatigue tests were conducted with mean stress from 80 to 150 MPa, stress amplitude from 270 to 340 MPa and stress rate from 30 to 750 MPa/s to study the process of plastic strain accumulation and its effect on fatigue life of Zircaloy-2 at room temperature. It was observed that with increase in mean stress and stress amplitude accumulation of ratcheting strain was increased and fatigue life was reduced. However, increase in stress rate led to improvement in fatigue life due to less accumulation of ratcheting strain.

Microstructure-sensitive small fatigue crack growth assessment. Effect of strain ratio multiaxial strain state and geometric discontinuities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castelluccio, Gustavo M.; McDowell, David L.

Fatigue crack initiation in the high cycle fatigue regime is strongly influenced by microstructural features. Research efforts have usually focused on predicting fatigue resistance against crack incubation without considering the early fatigue crack growth after encountering the first grain boundary. However, a significant fraction of the variability of the total fatigue life can be attributed to growth of small cracks as they encounter the first few grain boundaries, rather than crack formation within the first grain. Our paper builds on the framework previously developed by the authors to assess microstructure-sensitive small fatigue crack formation and early growth under complex loadingmore » conditions. Moreover, the scheme employs finite element simulations that explicitly render grains and crystallographic directions along with simulation of microstructurally small fatigue crack growth from grain to grain. The methodology employs a crystal plasticity algorithm in ABAQUS that was previously calibrated to study fatigue crack initiation in RR1000 Ni-base superalloy. Our work present simulations with non-zero applied mean strains and geometric discontinuities that were not previously considered for calibration. Results exhibit trends similar to those found in experiments for multiple metallic materials, conveying a consistent physical description of fatigue damage phenomena.« less

Muscle force compensation among synergistic muscles after fatigue of a single muscle.

PubMed

Stutzig, Norman; Siebert, Tobias

2015-08-01

The aim of this study was to examine control strategies among synergistic muscles after fatigue of a single muscle. It was hypothesized that the compensating mechanism is specific for each fatigued muscle. The soleus (SOL), gastrocnemius lateralis (GL) and medialis (GM) were fatigued in separate sessions on different days. In each experiment, subjects (n = 11) performed maximal voluntary contractions prior to and after fatiguing a single muscle (SOL, GL or GM) while the voluntary muscle activity and torque were measured. Additionally, the maximal single twitch torque of the plantarflexors and the maximal spinal reflex activity (H-reflex) of the SOL, GL and GM were determined. Fatigue was evoked using neuromuscular stimulation. Following fatigue the single twitch torque decreased by -20.1%, -19.5%, and -23.0% when the SOL, GL, or GM, have been fatigued. The maximal voluntary torque did not decrease in any session but the synergistic voluntary muscle activity increased significantly. Moreover, we found no alterations in spinal reflex activity. It is concluded that synergistic muscles compensate each other. Furthermore, it seems that self-compensating mechanism of the fatigued muscles occurred additionally. The force compensation does not depend on the function of the fatigued muscle. Copyright © 2015 Elsevier B.V. All rights reserved.

Microstructure-sensitive small fatigue crack growth assessment. Effect of strain ratio multiaxial strain state and geometric discontinuities

DOE PAGES

Castelluccio, Gustavo M.; McDowell, David L.

2015-09-16

Fatigue crack initiation in the high cycle fatigue regime is strongly influenced by microstructural features. Research efforts have usually focused on predicting fatigue resistance against crack incubation without considering the early fatigue crack growth after encountering the first grain boundary. However, a significant fraction of the variability of the total fatigue life can be attributed to growth of small cracks as they encounter the first few grain boundaries, rather than crack formation within the first grain. Our paper builds on the framework previously developed by the authors to assess microstructure-sensitive small fatigue crack formation and early growth under complex loadingmore » conditions. Moreover, the scheme employs finite element simulations that explicitly render grains and crystallographic directions along with simulation of microstructurally small fatigue crack growth from grain to grain. The methodology employs a crystal plasticity algorithm in ABAQUS that was previously calibrated to study fatigue crack initiation in RR1000 Ni-base superalloy. Our work present simulations with non-zero applied mean strains and geometric discontinuities that were not previously considered for calibration. Results exhibit trends similar to those found in experiments for multiple metallic materials, conveying a consistent physical description of fatigue damage phenomena.« less

An investigation of fatigue phenomenon in the upper limb muscle due to short duration pulses in an FES system

NASA Astrophysics Data System (ADS)

Naeem, Jannatul; Wong Azman, Amelia; Khan, Sheroz; Mohd Mustafah, Yasir

2013-12-01

Functional Electrical Stimulation (FES) is a method of artificially stimulating muscles or nerves in order to result in contraction or relaxation of muscles. Many studies have shown that FES system has helped patients to live a better lives especially those who are suffering from physical mobility. Unfortunately, one of the main limitations of an FES system besides of its high cost is largely due to muscle fatigue. Muscle fatigue will affect the training duration which could delay patients' recovery rate. In this paper, we analyzed the occurrence of this fatigue phenomenon in terms of stimulator parameters such as amplitude, frequency, pulse width and pulse shape. The objective of this investigation is to identify other key features of the FES system parameters in order to prolong the training duration among patients. The experiment has been done on a healthy person for the duration of one minute and later the muscles response will be observed. Resultant muscle response is recorded as force using force resistive sensor. The experimental results show muscles will get fatigue at a different rate as the frequency increases. The experiment also shows that the duty cycle is reciprocal to the resultant force.

Investigating Driver Fatigue versus Alertness Using the Granger Causality Network.

PubMed

Kong, Wanzeng; Lin, Weicheng; Babiloni, Fabio; Hu, Sanqing; Borghini, Gianluca

2015-08-05

Driving fatigue has been identified as one of the main factors affecting drivers' safety. The aim of this study was to analyze drivers' different mental states, such as alertness and drowsiness, and find out a neurometric indicator able to detect drivers' fatigue level in terms of brain networks. Twelve young, healthy subjects were recruited to take part in a driver fatigue experiment under different simulated driving conditions. The Electroencephalogram (EEG) signals of the subjects were recorded during the whole experiment and analyzed by using Granger-Causality-based brain effective networks. It was that the topology of the brain networks and the brain's ability to integrate information changed when subjects shifted from the alert to the drowsy stage. In particular, there was a significant difference in terms of strength of Granger causality (GC) in the frequency domain and the properties of the brain effective network i.e., causal flow, global efficiency and characteristic path length between such conditions. Also, some changes were more significant over the frontal brain lobes for the alpha frequency band. These findings might be used to detect drivers' fatigue levels, and as reference work for future studies.

Investigating Driver Fatigue versus Alertness Using the Granger Causality Network

PubMed Central

Kong, Wanzeng; Lin, Weicheng; Babiloni, Fabio; Hu, Sanqing; Borghini, Gianluca

2015-01-01

Driving fatigue has been identified as one of the main factors affecting drivers’ safety. The aim of this study was to analyze drivers’ different mental states, such as alertness and drowsiness, and find out a neurometric indicator able to detect drivers’ fatigue level in terms of brain networks. Twelve young, healthy subjects were recruited to take part in a driver fatigue experiment under different simulated driving conditions. The Electroencephalogram (EEG) signals of the subjects were recorded during the whole experiment and analyzed by using Granger-Causality-based brain effective networks. It was that the topology of the brain networks and the brain’s ability to integrate information changed when subjects shifted from the alert to the drowsy stage. In particular, there was a significant difference in terms of strength of Granger causality (GC) in the frequency domain and the properties of the brain effective network i.e., causal flow, global efficiency and characteristic path length between such conditions. Also, some changes were more significant over the frontal brain lobes for the alpha frequency band. These findings might be used to detect drivers’ fatigue levels, and as reference work for future studies. PMID:26251909

Self-motion magnitude estimation during linear oscillation - Changes with head orientation and following fatigue

NASA Technical Reports Server (NTRS)

Parker, D. E.; Wood, D. L.; Gulledge, W. L.; Goodrich, R. L.

1979-01-01

Two types of experiments concerning the estimated magnitude of self-motion during exposure to linear oscillation on a parallel swing are described in this paper. Experiment I examined changes in magnitude estimation as a function of variation of the subject's head orientation, and Experiments II a, II b, and II c assessed changes in magnitude estimation performance following exposure to sustained, 'intense' linear oscillation (fatigue-inducting stimulation). The subjects' performance was summarized employing Stevens' power law R = k x S to the nth, where R is perceived self-motion magnitude, k is a constant, S is amplitude of linear oscillation, and n is an exponent). The results of Experiment I indicated that the exponents, n, for the magnitude estimation functions varied with head orientation and were greatest when the head was oriented 135 deg off the vertical. In Experiments II a-c, the magnitude estimation function exponents were increased following fatigue. Both types of experiments suggest ways in which the vestibular system's contribution to a spatial orientation perceptual system may vary. This variability may be a contributing factor to the development of pilot/astronaut disorientation and may also be implicated in the occurrence of motion sickness.

Factors on working conditions and prolonged fatigue among physicians in Japan.

PubMed

Wada, Koji; Arimatsu, Mayuri; Yoshikawa, Toru; Oda, Susumu; Taniguchi, Hatsumi; Higashi, Toshiaki; Aizawa, Yoshiharu

2008-10-01

Fatigue among physicians could affect patients' safety and physicians' health. Fatigue could be caused by unfavorable working conditions. However, there have been no studies on the working conditions and fatigue among physicians in Japan. The objective of this study was to determine the factors on working conditions associated with prolonged fatigue among physicians in Japan. A questionnaire was mailed to physicians who graduated from one of the medical schools in Japan and who have had more than 3 years of experience in clinical practice. They were asked to assess 10 different aspects of their working conditions using a 5-point Likert scale. Prolonged fatigue was measured using the checklist of individual strength questionnaire. Multiple regression analysis was used to examine the multivariate relationship between the variables and prolonged fatigue. Data from 377 men and 101 women were analyzed in this study. For both male and female physicians, a harder workload was positively associated and better career satisfaction was negatively associated with prolonged fatigue. Prolonged fatigue was negatively associated with better relationships with other physicians and staff for male physicians and less personal time for female physicians. The adjusted variance in prolonged fatigue related to exposure variables was 26 and 29% in men and in women, respectively. The result of this study suggested that it is desirable to take these factors into consideration in the management of prolonged fatigue among physicians in Japan.

Gender differences in fatigue: biopsychosocial factors relating to fatigue in men and women.

PubMed

Bensing, J M; Hulsman, R L; Schreurs, K M

1999-10-01

Fatigue is a common problem, which is found more frequently among women than men. To date, neither the etiology of fatigue nor the factors that explain the gender difference in its incidence are still fully understood. In a sample of men (n = 4,681) and women (n = 4,698) (age range, 15-64 years) in the Dutch National Survey of Morbidity and Interventions in General Practice, the gender differences in the underlying biological, psychological, and social factors of fatigue were analyzed. Both general and gender-specific factors were recognized. Men and women who experience complaints of fatigue appeared to be younger and more highly educated. They had more acute health complaints and more psychosocial problems and also showed a lower level of perceived health. Among women, only gender-specific biological complaints and psychosocial problems were related to fatigue. In addition, relevant sociodemographic variables included taking care of young children and being employed. Among men, fatigue was particularly related to having handicaps and severe chronic complaints. Taking care of young children did not make a difference in the male sample. Fatigue can only be adequately understood in a multicausal model with biomedical and psychosocial factors. Complaints of fatigue are too often ignored in general practice. By adopting a patient-centered style of communication, physicians can acquire a more complete picture of the patients' fatigue.

Compassion fatigue and compassion satisfaction among family physicians in the Republic of Srpska, Bosnia and Herzegovina.

PubMed

Račić, Maja; Virijević, Aleksandra; Ivković, Nedeljka; Joksimović, Bojan N; Joksimović, Vedrana R; Mijovic, Biljana

2018-03-19

The aim of this study was to examine self-perceived compassion fatigue and compassion satisfaction among family physicians in Bosnia and Herzegovina and describe potential contributing factors. The cross-sectional study enrolled 120 family physicians. Professional quality of life compassion satisfaction and fatigue version 5 (ProQOL5) was used to assess compassion satisfaction and two components of compassion fatigue, secondary traumatic stress and burnout. The symptoms of chronic fatigue were evaluated using the Chalder fatigue scale. The majority of family physicians had moderate levels of compassion satisfaction (70%), burnout (75%) and secondary traumatic stress (55.8%). Family physicians with higher levels of secondary traumatic stress reported chronic fatigue (p = 0.001), longer length of service (p = 0.024) and residency training (p = 0.041). Chronic fatigue (p = 0.001), living in a rural environment (p = 0.033), larger size of practice (p = 0.006) and high number of patients with chronic disease (p = 0.001) were associated with a higher risk of burnout. Family physicians with large practices, long years of experience, a high number of chronically ill patients and experiencing chronic fatigue are at risk of developing compassion fatigue. A systematic exploration of compassion fatigue in relation to working conditions might provide an appropriate starting point for the development of preventive interventions.

Experiments on Factors That Influence Muscular Function in Man.

DTIC Science & Technology

1983-05-25

of phentolamine or phenylephrine did not affect the increase in mean arterial blood pressure , which reached the same high levels at fatigue in all...CLASSIFICATION OF THIS PAGE(Whon Date Elrered) same when the contractions result in muscular fatigue, at which time the mean . blood pressure is the same as it is...arterial blood pressure of bout 150 mmHg at the point of muscular fatigue. Clearly, some vaso- constrictp> response was intervening since the blood flow

A Multi-Scale Structural Health Monitoring Approach for Damage Detection, Diagnosis and Prognosis in Aerospace Structures

DTIC Science & Technology

2012-01-20

ultrasonic Lamb waves to plastic strain and fatigue life. Theory was developed and validated to predict second harmonic generation for specific mode... Fatigue and damage generation and progression are processes consisting of a series of interrelated events that span large scales of space and time...strain and fatigue life A set of experiments were completed that worked to relate the acoustic nonlinearity measured with Lamb waves to both the

Crack Initiation and Growth Behavior at Corrosion Pit in 7075-T6 Under Biaxial and Uniaxial Fatigue

DTIC Science & Technology

2014-06-19

al. examined the effect of biaxial loading on the fatigue crack growth [52]. They conducted their fatigue tests on SUS 304 stainless steel using a...specimens. Their experiments were carried out on cruciform test coupons using a digitally controlled four actuator biaxial testing system. Steel ...as shown in Figure 3.7. The test specimen was placed between two stainless steel chambers. These chambers were connected together using screws, and

Orbital fatigue tester for use in Skylab experiment T032

NASA Technical Reports Server (NTRS)

Sandorff, P. E.

1973-01-01

A prototype fatigue test machine is described which is suitable for use by an astronaut in conducting constant amplitude materials fatigue tests aboard a Skylab or space shuttle vehicle. The machine is comparised of a mechanical tester, which would be passed through a small (7.6-inch square) airlock to be supported in the space environment on an extendible boom, and a control console, which would provide remote control from within the space vehicle.

Multiphysics Simulation of Low-Amplitude Acoustic Wave Detection by Piezoelectric Wafer Active Sensors Validated by In-Situ AE-Fatigue Experiment

PubMed Central

Giurgiutiu, Victor

2017-01-01

Piezoelectric wafer active sensors (PWAS) are commonly used for detecting Lamb waves for structural health monitoring application. However, in most applications of active sensing, the signals are of high-amplitude and easy to detect. In this article, we have shown a new avenue of using the PWAS transducer for detecting the low-amplitude fatigue-crack related acoustic emission (AE) signals. Multiphysics finite element (FE) simulations were performed with two PWAS transducers bonded to the structure. Various configurations of the sensors were studied by using the simulations. One PWAS was placed near to the fatigue-crack and the other one was placed at a certain distance from the crack. The simulated AE event was generated at the crack tip. The simulation results showed that both PWAS transducers were capable of sensing the AE signals. To validate the multiphysics simulation results, an in-situ AE-fatigue experiment was performed. Two PWAS transducers were bonded to the thin aerospace test coupon. The fatigue crack was generated in the test coupon which had produced low-amplitude acoustic waves. The low-amplitude fatigue-crack related AE signals were successfully captured by the PWAS transducers. The distance effect on the captured AE signals was also studied. It has been shown that some high-frequency contents of the AE signal have developed as they travel away from the crack. PMID:28817081

Elevated temperature axial and torsional fatigue behavior of Haynes 188

NASA Technical Reports Server (NTRS)

Bonacuse, Peter J.; Kalluri, Sreeramesh

1995-01-01

The results are reported for high-temperature axial and torsional low-cycle fatigue experiments performed at 760 C in air on thin-walled tubular specimens of Haynes 188, a wrought cobalt-based superalloy. Data are also presented for mean coefficient of thermal expansion, elastic modulus, and shear modulus at various temperatures from room to 1000 C, and monotonic and cyclic stress-strain curves in tension and in shear at 760 C. This data set is used to evaluate several multiaxial fatigue life models (most were originally developed for room temperature multiaxial life prediction) including von Mises equivalent strain range (ASME Boiler and Pressure Code), Manson-Halford, modified multiaxiality factor (proposed in this paper), modified Smith-Watson-Topper, and Fatemi-Socie-Kurath. At von Mises equivalent strain ranges (the torsional strain range divided by the square root of 3, taking the Poisson's ratio to be 0.5), torsionally strained specimens lasted, on average, factors of 2 to 3 times longer than axially strained specimens. The modified multiaxiality factor approach shows promise as a useful method of estimating torsional fatigue life from axial fatigue data at high temperatures. Several difficulties arose with the specimen geometry and extensometry used in these experiments. Cracking at extensometer probe indentations was a problem at smaller strain ranges. Also, as the largest axial and torsional strain range fatigue tests neared completion, a small amount of specimen buckling was observed.

The High Costs of Low-Grade Inflammation: Persistent Fatigue as a Consequence of Reduced Cellular-Energy Availability and Non-adaptive Energy Expenditure.

PubMed

Lacourt, Tamara E; Vichaya, Elisabeth G; Chiu, Gabriel S; Dantzer, Robert; Heijnen, Cobi J

2018-01-01

Chronic or persistent fatigue is a common, debilitating symptom of several diseases. Persistent fatigue has been associated with low-grade inflammation in several models of fatigue, including cancer-related fatigue and chronic fatigue syndrome. However, it is unclear how low-grade inflammation leads to the experience of fatigue. We here propose a model of an imbalance in energy availability and energy expenditure as a consequence of low-grade inflammation. In this narrative review, we discuss how chronic low-grade inflammation can lead to reduced cellular-energy availability. Low-grade inflammation induces a metabolic switch from energy-efficient oxidative phosphorylation to fast-acting, but less efficient, aerobic glycolytic energy production; increases reactive oxygen species; and reduces insulin sensitivity. These effects result in reduced glucose availability and, thereby, reduced cellular energy. In addition, emerging evidence suggests that chronic low-grade inflammation is associated with increased willingness to exert effort under specific circumstances. Circadian-rhythm changes and sleep disturbances might mediate the effects of inflammation on cellular-energy availability and non-adaptive energy expenditure. In the second part of the review, we present evidence for these metabolic pathways in models of persistent fatigue, focusing on chronic fatigue syndrome and cancer-related fatigue. Most evidence for reduced cellular-energy availability in relation to fatigue comes from studies on chronic fatigue syndrome. While the mechanistic evidence from the cancer-related fatigue literature is still limited, the sparse results point to reduced cellular-energy availability as well. There is also mounting evidence that behavioral-energy expenditure exceeds the reduced cellular-energy availability in patients with persistent fatigue. This suggests that an inability to adjust energy expenditure to available resources might be one mechanism underlying persistent fatigue.

The High Costs of Low-Grade Inflammation: Persistent Fatigue as a Consequence of Reduced Cellular-Energy Availability and Non-adaptive Energy Expenditure

PubMed Central

Lacourt, Tamara E.; Vichaya, Elisabeth G.; Chiu, Gabriel S.; Dantzer, Robert; Heijnen, Cobi J.

2018-01-01

Chronic or persistent fatigue is a common, debilitating symptom of several diseases. Persistent fatigue has been associated with low-grade inflammation in several models of fatigue, including cancer-related fatigue and chronic fatigue syndrome. However, it is unclear how low-grade inflammation leads to the experience of fatigue. We here propose a model of an imbalance in energy availability and energy expenditure as a consequence of low-grade inflammation. In this narrative review, we discuss how chronic low-grade inflammation can lead to reduced cellular-energy availability. Low-grade inflammation induces a metabolic switch from energy-efficient oxidative phosphorylation to fast-acting, but less efficient, aerobic glycolytic energy production; increases reactive oxygen species; and reduces insulin sensitivity. These effects result in reduced glucose availability and, thereby, reduced cellular energy. In addition, emerging evidence suggests that chronic low-grade inflammation is associated with increased willingness to exert effort under specific circumstances. Circadian-rhythm changes and sleep disturbances might mediate the effects of inflammation on cellular-energy availability and non-adaptive energy expenditure. In the second part of the review, we present evidence for these metabolic pathways in models of persistent fatigue, focusing on chronic fatigue syndrome and cancer-related fatigue. Most evidence for reduced cellular-energy availability in relation to fatigue comes from studies on chronic fatigue syndrome. While the mechanistic evidence from the cancer-related fatigue literature is still limited, the sparse results point to reduced cellular-energy availability as well. There is also mounting evidence that behavioral-energy expenditure exceeds the reduced cellular-energy availability in patients with persistent fatigue. This suggests that an inability to adjust energy expenditure to available resources might be one mechanism underlying persistent fatigue. PMID:29755330

Damage detection and locating using tone burst and continuous excitation modulation method

NASA Astrophysics Data System (ADS)

Li, Zheng; Wang, Zhi; Xiao, Li; Qu, Wenzhong

2014-03-01

Among structural health monitoring techniques, nonlinear ultrasonic spectroscopy methods are found to be effective diagnostic approach to detecting nonlinear damage such as fatigue crack, due to their sensitivity to incipient structural changes. In this paper, a nonlinear ultrasonic modulation method was developed to detect and locate a fatigue crack on an aluminum plate. The method is different with nonlinear wave modulation method which recognizes the modulation of low-frequency vibration and high-frequency ultrasonic wave; it recognizes the modulation of tone burst and high-frequency ultrasonic wave. In the experiment, a Hanning window modulated sinusoidal tone burst and a continuous sinusoidal excitation were simultaneously imposed on the PZT array which was bonded on the surface of an aluminum plate. The modulations of tone burst and continuous sinusoidal excitation was observed in different actuator-sensor paths, indicating the presence and location of fatigue crack. The results of experiments show that the proposed method is capable of detecting and locating the fatigue crack successfully.

Compassion Fatigue in Pediatric Nurses.

PubMed

Berger, Jill; Polivka, Barbara; Smoot, Elizabeth Ann; Owens, Heather

2015-01-01

Compassion fatigue in nursing has been shown to impact the quality of patient care and employee satisfaction and engagement. The aims of this study were to determine the prevalence and severity of compassion fatigue among pediatric nurses and variations in prevalence based on respondent demographics using a cross-sectional survey design. Nurses under 40 years of age, with 6-10 years of experience and/or working in a medical-surgical unit had significantly lower compassion satisfaction and higher levels of burnout. Secondary traumatic stress from caring for children with severe illness or injury or end of life was a key contributor to compassion fatigue. Copyright © 2015 Elsevier Inc. All rights reserved.

Increased Surface Fatigue Lives of Spur Gears by Application of a Coating

NASA Technical Reports Server (NTRS)

Krantz, Timothy L.; Cooper, Clark V.; Townsend, Dennis P.; Hansen, Bruce D.

2003-01-01

Hard coatings have potential for increasing gear surface fatigue lives. Experiments were conducted using gears both with and without a metal-containing, carbonbased coating. The gears were case-carburized AISI 9310 steel spur gears. Some gears were provided with the coating by magnetron sputtering. Lives were evaluated by accelerated life tests. For uncoated gears, all of fifteen tests resulted in fatigue failure before completing 275 million revolutions. For coated gears, eleven of the fourteen tests were suspended with no fatigue failure after 275 million revolutions. The improved life owing to the coating, approximately a six-fold increase, was a statistically significant result.

Experiments of thermomechanical fatigue of SMAs

NASA Astrophysics Data System (ADS)

Lagoudas, Dimitris C.; Miller, David A.

1999-07-01

As SMA wires are gaining in popularity for use as actuators, one constitutive parameter that remain unknown is the thermomechanical fatigue life. Even though the effect of thermal cycles on the transformation characteristics of SMAs has been studied, these teste have not been extended to high number of cycles. In this study, a novel test frame developed to study the thermomechanical fatigue life of SMAs is described. Additionally, a testing protocol is discussed necessary to fully establish the fatigue characteristics of SMAs under various conditions. Initial results of the initial test show a substantial increase in the number of cycles to failure as the applied stress level reduces to approximately 100 MPa.

A study of the relationship between self-care, compassion satisfaction, compassion fatigue, and burnout among hospice professionals.

PubMed

Alkema, Karen; Linton, Jeremy M; Davies, Randall

2008-01-01

Hospice care professionals (HCPs) experience a large number of stressors in their work settings. The purpose of this study was to investigate the relationship between self-care, compassion fatigue, burnout, and compassion satisfaction among HCPs. Thirty-seven HCPs were surveyed regarding their levels of compassion satisfaction, compassion fatigue, and burnout. Respondents also reported the types of self-care activities in which they took part. Results indicated a relationship between self-care strategies and lower levels of burnout and compassion fatigue, and higher levels of compassion satisfaction. Several suggestions are offered for continued research and practice in the hospice care field.

Suppression of Locomotor Activity in Female C57Bl/6J Mice Treated with Interleukin-1β: Investigating a Method for the Study of Fatigue in Laboratory Animals.

PubMed

Bonsall, David R; Kim, Hyunji; Tocci, Catherine; Ndiaye, Awa; Petronzio, Abbey; McKay-Corkum, Grace; Molyneux, Penny C; Scammell, Thomas E; Harrington, Mary E

2015-01-01

Fatigue is a disabling symptom in patients with multiple sclerosis and Parkinson's Disease, and is also common in patients with traumatic brain injury, cancer, and inflammatory disorders. Little is known about the neurobiology of fatigue, in part due to the lack of an approach to induce fatigue in laboratory animals. Fatigue is a common response to systemic challenge by pathogens, a response in part mediated through action of the pro-inflammatory cytokine interleukin-1 beta (IL-1β). We investigated the behavioral responses of mice to IL-1β. Female C57Bl/6J mice of 3 ages were administered IL-1β at various doses i.p. Interleukin-1β reduced locomotor activity, and sensitivity increased with age. Further experiments were conducted with middle-aged females. Centrally administered IL-1β dose-dependently reduced locomotor activity. Using doses of IL-1β that caused suppression of locomotor activity, we measured minimal signs of sickness, such as hyperthermia, pain or anhedonia (as measured with abdominal temperature probes, pre-treatment with the analgesic buprenorphine and through sucrose preference, respectively), all of which are responses commonly reported with higher doses. We found that middle-aged orexin-/- mice showed equivalent effects of IL-1β on locomotor activity as seen in wild-type controls, suggesting that orexins are not necessary for IL-1β -induced reductions in wheel-running. Given that the availability and success of therapeutic treatments for fatigue is currently limited, we examined the effectiveness of two potential clinical treatments, modafinil and methylphenidate. We found that these treatments were variably successful in restoring locomotor activity after IL-1β administration. This provides one step toward development of a satisfactory animal model of the multidimensional experience of fatigue, a model that could allow us to determine possible pathways through which inflammation induces fatigue, and could lead to novel treatments for reversal of fatigue.

Gene Expression Profiling of Evening Fatigue in Women Undergoing Chemotherapy for Breast Cancer

PubMed Central

Kober, Kord M.; Dunn, Laura; Mastick, Judy; Cooper, Bruce; Langford, Dale; Melisko, Michelle; Venook, Alan; Chen, Lee-May; Wright, Fay; Hammer, Marilyn J.; Schmidt, Brian L.; Levine, Jon; Miaskowski, Christine; Aouizerat, Bradley E.

2017-01-01

Moderate to severe fatigue occurs in 14% to 96% of oncology patients undergoing active treatment. Current interventions for fatigue are not efficacious. A major impediment to the development of effective treatments is a lack of understanding of the fundamental mechanisms underlying fatigue. In the current study, differences in phenotypic characteristics and gene expression profiles were evaluated in a sample of breast cancer patients undergoing chemotherapy (CTX) who reported low (n=19) and high (n=25) levels of evening fatigue. Compared to the low group, patients in the high evening fatigue group reported lower functional status scores, higher comorbidity scores, and fewer prior cancer treatments. One gene was identified as up-regulated and eleven genes were identified to be down-regulated in the high evening fatigue group. Gene set analysis found 24 down-regulated and 94 simultaneously up and down perturbed pathways between the two fatigue groups. Transcript Origin Analysis found that differential expression originated primarily from monocytes and dendritic cell types. Query of public data sources found 18 gene expression experiments with similar differential expression profiles. Our analyses revealed that inflammation, neurotransmitter regulation, and energy metabolism are likely mechanisms associated with evening fatigue severity; that CTX may contribute to fatigue seen in oncology patients; and that the patterns of gene expression may be shared with other models of fatigue (e.g., physical exercise, pathogen-induced sickness behavior). These results suggest that the mechanisms that underlie fatigue in oncology patients are multi-factorial. PMID:26957308

Cancer-related fatigue: Mechanisms, risk factors, and treatments

PubMed Central

Bower, Julienne E.

2015-01-01

Fatigue is one of the most common and distressing side effects of cancer and its treatment, and may persist for years after treatment completion in otherwise healthy survivors. Cancer-related fatigue causes disruption in all aspects of quality of life and may be a risk factor for reduced survival. The prevalence and course of fatigue in cancer patients has been well characterized, and there is growing understanding of underlying biological mechanisms. Inflammation has emerged as a key biological pathway for cancer-related fatigue, with studies documenting links between markers of inflammation and fatigue before, during, and particularly after treatment. There is considerable variability in the experience of cancer-related fatigue that is not explained by disease- or treatment-related characteristics, suggesting that host factors may play an important role in the development and persistence of this symptom. Indeed, longitudinal studies have begun to identify genetic, biological, psychosocial, and behavioral risk factors for cancer-related fatigue. Given the multi-factorial nature of cancer-related fatigue, a variety of intervention approaches have been examined in randomized controlled trials, including physical activity, psychosocial, mind-body, and pharmacological treatments. Although there is currently no gold standard for treating fatigue, several of these approaches have shown beneficial effects and can be recommended to patients. This report provides a state of the science review of mechanisms, risk factors, and interventions for cancer-related fatigue, with a focus on recent longitudinal studies and randomized trials that have targeted fatigued patients. PMID:25113839

Strand Plasticity Governs Fatigue in Colloidal Gels

NASA Astrophysics Data System (ADS)

van Doorn, Jan Maarten; Verweij, Joanne E.; Sprakel, Joris; van der Gucht, Jasper

2018-05-01

The repeated loading of a solid leads to microstructural damage that ultimately results in catastrophic material failure. While posing a major threat to the stability of virtually all materials, the microscopic origins of fatigue, especially for soft solids, remain elusive. Here we explore fatigue in colloidal gels as prototypical inhomogeneous soft solids by combining experiments and computer simulations. Our results reveal how mechanical loading leads to irreversible strand stretching, which builds slack into the network that softens the solid at small strains and causes strain hardening at larger deformations. We thus find that microscopic plasticity governs fatigue at much larger scales. This gives rise to a new picture of fatigue in soft thermal solids and calls for new theoretical descriptions of soft gel mechanics in which local plasticity is taken into account.

Microstructure-based approach for predicting crack initiation and early growth in metals.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, James V.; Emery, John M.; Brewer, Luke N.

2009-09-01

Fatigue cracking in metals has been and is an area of great importance to the science and technology of structural materials for quite some time. The earliest stages of fatigue crack nucleation and growth are dominated by the microstructure and yet few models are able to predict the fatigue behavior during these stages because of a lack of microstructural physics in the models. This program has developed several new simulation tools to increase the microstructural physics available for fatigue prediction. In addition, this program has extended and developed microscale experimental methods to allow the validation of new microstructural models formore » deformation in metals. We have applied these developments to fatigue experiments in metals where the microstructure has been intentionally varied.« less

Residual stress relief due to fatigue in tetragonal lead zirconate titanate ceramics

NASA Astrophysics Data System (ADS)

Hall, D. A.; Mori, T.; Comyn, T. P.; Ringgaard, E.; Wright, J. P.

2013-07-01

High energy synchrotron XRD was employed to determine the lattice strain ɛ{111} and diffraction peak intensity ratio R{200} in tetragonal PZT ceramics, both in the virgin poled state and after a bipolar fatigue experiment. It was shown that the occurrence of microstructural damage during fatigue was accompanied by a reduction in the gradient of the ɛ{111}-cos2 ψ plot, indicating a reduction in the level of residual stress due to poling. In contrast, the fraction of oriented 90° ferroelectric domains, quantified in terms of R{200}, was not affected significantly by fatigue. The change in residual stress due to fatigue is interpreted in terms of a change in the average elastic stiffness of the polycrystalline matrix due to the presence of inter-granular microcracks.

Cyclic and Fatigue Behaviour of Rock Materials: Review, Interpretation and Research Perspectives

NASA Astrophysics Data System (ADS)

Cerfontaine, B.; Collin, F.

2018-02-01

The purpose of this paper is to provide a comprehensive state of the art of fatigue and cyclic loading of natural rock materials. Papers published in the literature are classified and listed in order to ease bibliographical review, to gather data (sometimes contradictory) on classical experimental results and to analyse the main interpretation concepts. Their advantages and limitations are discussed, and perspectives for further work are highlighted. The first section summarises and defines the different experimental set-ups (type of loading, type of experiment) already applied to cyclic/fatigue investigation of rock materials. The papers are then listed based on these different definitions. Typical results are highlighted in next section. Fatigue/cyclic loading mainly results in accumulation of plastic deformation and/or damage cycle after cycle. A sample cyclically loaded at constant amplitude finally leads to failure even if the peak load is lower than its monotonic strength. This subcritical crack is due to a diffuse microfracturing and decohesion of the rock structure. The third section reviews and comments the concepts used to interpret the results. The fatigue limit and S- N curves are the most common concepts used to describe fatigue experiments. Results published from all papers are gathered into a single figure to highlight the tendency. Predicting the monotonic peak strength of a sample is found to be critical in order to compute accurate S- N curves. Finally, open questions are listed to provide a state of the art of grey areas in the understanding of fatigue mechanisms and challenges for the future.

Lack of Energy: An Important and Distinct Component of HIV-Related Fatigue and Daytime Function

PubMed Central

Aouizerat, Bradley E.; Gay, Caryl L.; Lerdal, Anners; Portillo, Carmen J.; Lee, Kathryn A.

2012-01-01

Context Fatigue is a prevalent symptom among adults living with human immunodeficiency virus (HIV). There is increasing evidence that fatigue and energy are related, yet distinct constructs. Although HIV-related fatigue has been well studied, little is known about perceived energy and how it relates to fatigue, individual characteristics, and other symptoms. Objectives To describe the experience of perceived energy in adults with HIV and evaluate its relationship to demographic and clinical characteristics as well as symptoms of fatigue, sleep disturbance, anxiety, depression, and daytime function. Methods The design was descriptive, comparative, and correlational. The sample of 318 adults with HIV completed a demographic questionnaire, the Memorial Symptom Assessment Scale, and measures of fatigue, sleep disturbance, anxiety, depressive symptoms, and daytime function. Medical records were reviewed for disease and treatment data. Participants who reported a lack of energy were compared with those who did not on demographic, clinical, and symptom variables. Regression models of perceived energy and its interference with daytime function also were evaluated. Results Perceived lack of energy was highly prevalent (65%) and more strongly related to interference with daytime function than more general measures of fatigue severity, even when controlling for other characteristics and symptoms. Like other aspects of fatigue, lack of energy was associated with sleep disturbance, anxiety, and depressive symptoms. Lack of energy was more strongly related to morning fatigue than to evening fatigue. Conclusion Lack of energy interferes with daytime function and is not just the inverse of fatigue but a distinct perception that differs from fatigue. PMID:22917712

The reciprocal relationship between daily fatigue and catastrophizing following cancer treatment: Affect and physical activity as potential mediators.

PubMed

Müller, Fabiola; Stephenson, Ellen; DeLongis, Anita; Smink, Ans; Van Ginkel, Robert J; Tuinman, Marrit A; Hagedoorn, Mariët

2018-03-01

Fatigue is a distressing symptom many cancer patients experience even after completion of treatment. Although theory and empirical evidence indicate that negative cognitions perpetuate fatigue after completion of treatment, insight into how this process unfolds in daily life is limited. This study used an intensive longitudinal design to investigate the reciprocal relationship between catastrophizing and fatigue in daily life and whether affective and behavioral processes mediate these relationships. Post-treatment colorectal cancer patients (n = 101) completed daily diaries (14 days, 3 times daily) regarding their fatigue, catastrophizing, positive and negative affect, and physical activity. Multilevel modeling was applied to investigate within-person associations within days. Analyses revealed a positive reciprocal relationship between fatigue and catastrophizing throughout the day. That is, high levels of catastrophizing were associated with increases in fatigue within patients. In turn, but to a lesser extent, high levels of fatigue predicted increases in catastrophizing at the next assessment. Low positive affect and high negative affect mediated the effect of catastrophizing on increases in fatigue. Only negative affect mediated the reverse relationship. Physical activity did not mediate either relationship. This study provides evidence for a mutually reinforcing relationship between catastrophizing and fatigue in daily life, which might explain the perpetuation of fatigue after completion of cancer treatment. Fatigue-specific cognitive behavior therapy could be improved by educating patients about this daily reciprocal relationship, train them to quickly replace catastrophizing thoughts in daily life, and help them to cope with affective changes induced by fatigue. Copyright © 2017 John Wiley & Sons, Ltd.

Literature review : simple test method for possible use in predicting the fatigue of asphaltic concrete.

DOT National Transportation Integrated Search

1975-01-01

It has been recognized for many years that fatigue is one of many mechanisms by which asphaltic concrete pavements fail. Experience and empirical design procedures such as those developed by Marshall and Hveem have enabled engineers to design-mixture...

Evaluation of the user experience of "astronaut training device": an immersive, vr-based, motion-training system

NASA Astrophysics Data System (ADS)

Yue, Kang; Wang, Danli; Yang, Xinpan; Hu, Haichen; Liu, Yuqing; Zhu, Xiuqing

2016-10-01

To date, as the different application fields, most VR-based training systems have been different. Therefore, we should take the characteristics of application field into consideration and adopt different evaluation methods when evaluate the user experience of these training systems. In this paper, we propose a method to evaluate the user experience of virtual astronauts training system. Also, we design an experiment based on the proposed method. The proposed method takes learning performance as one of the evaluation dimensions, also combines with other evaluation dimensions such as: presence, immersion, pleasure, satisfaction and fatigue to evaluation user experience of the System. We collect subjective and objective data, the subjective data are mainly from questionnaire designed based on the evaluation dimensions and user interview conducted before and after the experiment. While the objective data are consisted of Electrocardiogram (ECG), reaction time, numbers of reaction error and the video data recorded during the experiment. For the analysis of data, we calculate the integrated score of each evaluation dimension by using factor analysis. In order to improve the credibility of the assessment, we use the ECG signal and reaction test data before and after experiment to validate the changes of fatigue during the experiment, and the typical behavioral features extracted from the experiment video to explain the result of subjective questionnaire. Experimental results show that the System has a better user experience and learning performance, but slight visual fatigue exists after experiment.

Analysis of electrical and magnetic bio-signals associated with motor performance and fatigue

NASA Astrophysics Data System (ADS)

Yao, Bing

This dissertation reports findings centered principally on comprehensive research related to human bio-signals (EEG, MEG, EMG and fMRI) acquired during repetitive maximal voluntary contractions (MVC) that induced severe fatigue. Fatigue is a common experience that reduces productivity and quality of life and increases chances of injury. Although abundant information has been gained in the last several decades regarding muscular and spinal-level mechanisms of muscle fatigue, very little is known about how cortical centers control and respond to fatigue. The main purpose of this study was to examine the fatigue effects on the central nervous system by analyzing the bio-signals collected in the designed experiments. Healthy human subjects were asked to perform a series of repetitive handgrip MVCs with their dominant hand until exhaustion. Handgrip forces, electrical activity (EMG) from primary and non-primary muscles, and EEG, MEG, or fMRI signals from different locations of the brain were recorded simultaneously. The time series data were segmented into several physiologically meaningful epochs (time phases), from rest to preparation to movement execution/sustaining. A series of studies, including motor-related cortical potential (MRCP) analysis, power spectrum analysis, time-frequency (spectrogram) analysis of EEG, EEG source localization and nonlinear analysis (fractal dimension and largest Lyapunov exponent), and fMRI analysis, was applied to the data. We hypothesized that the fatigue effects would act differently on brain signals of different phases. The MRCP results showed that the negative potential (NP) related to motor task preparation only had minimal changes with fatigue. The power of all EEG frequencies did not alter significantly during the preparation phase but decreased significantly during the sustained phase of the contraction. The fractal dimension and the largest Lyapunov exponent decreased significantly during the sustained phase as fatigue progressed. On the other hand, the fMRI results only exhibited insignificant fatigue-related reductions of brain activation volume and no significant change of dipole strength derived from multi-channel EEG data. These results have been interpreted by a hypothetical neurophysiological model, in which two groups of cortical neurons (phasic and tonic) are preferentially activated in each physiological phase of the voluntary motor action.

Consistency in trophic magnification factors of cyclic methyl siloxanes in pelagic freshwater food webs leading to brown trout.

PubMed

Borgå, Katrine; Fjeld, Eirik; Kierkegaard, Amelie; McLachlan, Michael S

2013-12-17

Cyclic volatile methyl siloxanes (cVMS) concentrations were analyzed in the pelagic food web of two Norwegian lakes (Mjøsa, Randsfjorden), and in brown trout (Salmo trutta) and Arctic char (Salvelinus alpinus) collected in a reference lake (Femunden), in 2012. Lakes receiving discharge from wastewater treatment plants (Mjøsa and Randsfjorden) had cVMS concentrations in trout that were up to 2 orders of magnitude higher than those in Femunden, where most samples were close to the limit of quantification (LOQ). Food web biomagnification of cVMS in Mjøsa and Randsfjorden was quantified by estimation of trophic magnification factors (TMFs). TMF for legacy persistent organic pollutants (POPs) were analyzed for comparison. Both decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) biomagnified with TMFs of 2.9 (2.1-4.0) and 2.3 (1.8-3.0), respectively. Octamethylcyclotetrasiloxane (D4) was below the LOQ in the majority of samples and had substantially lower biomagnification than for D5 and D6. The cVMS TMFs did not differ between the lakes, whereas the legacy POP TMFs were higher in Mjøsa than inRandsfjorden. Whitefish had lower cVMS bioaccumulation compared to legacy POPs, and affected the TMF significance for cVMS, but not for POPs. TMFs of D5 and legacy contaminants in Lake Mjøsa were consistent with those previously measured in Mjøsa.

The Relation Between Child Versus Parent Report of Chronic Fatigue and Language/Literacy Skills in School-Age Children with Cochlear Implants.

PubMed

Werfel, Krystal L; Hendricks, Alison Eisel

2016-01-01

Preliminary evidence suggests that children with hearing loss experience elevated levels of chronic fatigue compared with children with normal hearing. Chronic fatigue is associated with decreased academic performance in many clinical populations. Children with cochlear implants as a group exhibit deficits in language and literacy skills; however, the relation between chronic fatigue and language and literacy skills for children with cochlear implants is unclear. The purpose of this study was to explore subjective ratings of chronic fatigue by children with cochlear implants and their parents, as well as the relation between chronic fatigue and language and literacy skills in this population. Nineteen children with cochlear implants in grades 3 to 6 and one of their parents separately completed a subjective chronic fatigue scale, on which they rated how much the child experienced physical, sleep/rest, and cognitive fatigue over the past month. In addition, children completed an assessment battery that included measures of speech perception, oral language, word reading, and spelling. Children and parents reported different levels of chronic child physical and sleep/rest fatigue. In both cases, parents reported significantly less fatigue than did children. Children and parents did not report different levels of chronic child cognitive fatigue. Child report of physical fatigue was related to speech perception, language, reading, and spelling. Child report of sleep/rest and cognitive fatigue was related to speech perception and language but not to reading or spelling. Parent report of child fatigue was not related to children's language and literacy skills. Taken as a whole, results suggested that parents under-estimate the fatigue experienced by children with cochlear implants. Child report of physical fatigue was robustly related to language and literacy skills. Children with cochlear implants are likely more accurate at reporting physical fatigue than cognitive fatigue. Clinical practice should take fatigue into account when developing treatment plans for children with cochlear implants, and research should continue to develop a comprehensive model of fatigue in children with cochlear implants.

Naturally-occurring fatigue and cardiovascular response to a simple memory challenge.

PubMed

Mlynski, Christopher; Wright, Rex A; Agtarap, Stephanie D; Rojas, Juan

2017-09-01

Participants first completed a state affect checklist that included a fatigue (energy-tiredness) index and a measure of mental sharpness. They then were presented a simple memory challenge. In the first minute of the two-minute work period, heart rate responses (1) rose with values on the fatigue index, and (2) fell with values on the measure of mental sharpness. In the second minute of the work period, the responses were unrelated to fatigue index and mental sharpness values. Follow-up analysis indicated mental sharpness mediation of fatigue influence on heart rate in Minute 1. First minute findings add substantively to the body of evidence supporting recent suggestions that fatigue can lead people to try harder and experience stronger cardiovascular responses when confronted with simple challenges. They also support the suggestion that fatigue might exert its influence on cardiovascular responses to a mental challenge by diminishing cognitive clarity, that is, by obscuring thought. Second minute findings are contrary to the fatigue suggestions, but could indicate that memorization was accomplished in the first minute. A practical implication of the first minute results is that real-world fatigue could elevate health risk by enhancing CV responses to mundane daily tasks. Copyright © 2017 Elsevier B.V. All rights reserved.

Muscle fatigue evaluation of astronaut upper limb based on sEMG and subjective assessment

NASA Astrophysics Data System (ADS)

Zu, Xiaoqi; Zhou, Qianxiang; Li, Yun

2012-07-01

All movements are driven by muscle contraction, and it is easy to cause muscle fatigue. Evaluation of muscle fatigue is a hot topic in the area of astronaut life support training and rehabilitation. If muscle gets into fatigue condition, it may reduce work efficiency and has an impact on psychological performance. Therefore it is necessary to develop an accurate and usable method on muscle fatigue evaluation of astronaut upper limb. In this study, we developed a method based on surface electromyography (sEMG) and subjective assessment (Borg scale) to evaluate local muscle fatigue. Fifteen healthy young male subjects participated in the experiment. They performed isometric muscle contractions of the upper limb. sEMG of the biceps brachii were recorded during the entire process of isotonic muscle contraction and Borg scales of muscle fatigue were collected in certain times. sEMG were divided into several parts, and then mean energy of each parts were calculated by the one-twelfth band octave method. Equations were derived based on the relationship between the mean energy of sEMG and Borg scale. The results showed that cubic curve could describe the degree of local muscle fatigue, and could be used to evaluate and monitor local muscle fatigue during the entire process.

The Effect of Classroom Capacity on Vocal Fatigue as Quantified by the Vocal Fatigue Index.

PubMed

Banks, Russell E; Bottalico, Pasquale; Hunter, Eric J

2017-01-01

Previous research has concluded that teachers are at a higher-than-normal risk for voice issues that can cause occupational limitations. While some risk factors have been identified, there are still many unknowns. A survey was distributed electronically with 506 female teacher respondents. The survey included questions to quantify three aspects of vocal fatigue as captured by the Vocal Fatigue Index (VFI): (1) general tiredness of voice (performance), (2) physical discomfort associated with voicing (pain), and (3) improvement of symptoms with rest (recovery). The effect of classroom capacity on US teachers' self-reported experience of vocal fatigue was analyzed. The results indicated that a classroom's capacity significantly affected teachers' reported amounts of vocal fatigue, while a teacher's age also appeared to significantly affect the reported amount of vocal fatigue. A quadratic rather than linear effect was seen, with the largest age effect occurring at around 40-45 years in all three factors of the VFI. Further factors which may affect vocal fatigue must be explored in future research. By understanding what increases the risk for vocal fatigue, educators and school administrators can take precautions to mitigate the occupational risk of short- and long-term vocal health issues in school teachers. © 2017 S. Karger AG, Basel.

Elevated temperature biaxial fatigue

NASA Technical Reports Server (NTRS)

Jordan, E. H.

1985-01-01

A 3 year experimental program for studying elevated temperature biaxial fatigue of a nickel based alloy Hastelloy-X has been completed. A new high temperature fatigue test facility with unique capabilities has been developed. Effort was directed toward understanding multiaxial fatigue and correlating the experimental data to the existing theories of fatigue failure. The difficult task of predicting fatigue lives for nonproportional loading was used as an ultimate test for various life prediction methods being considered. The primary means of reaching improved understanding were through several critical nonproportional loading experiments. The direction of cracking observed on failed specimens was also recorded and used to guide the development of the theory. Cyclic deformation responses were permanently recorded digitally during each test. It was discovered that the cracking mode switched from primarily cracking on the maximum shear planes at room temperature to cracking on the maximum normal strain planes at 649 C. In contrast to some other metals, loading path in nonproportional loading had little effect on fatigue lives. Strain rate had a small effect on fatigue lives at 649 C. Of the various correlating parameters the modified plastic work and octahedral shear stress were the most successful.

Comments on the origin of acoustic emission in fatigue testing of aluminum alloys

NASA Astrophysics Data System (ADS)

Heiple, C. R.; Carpenter, S. H.; Armentrout, D. L.

The size of acoustic emission (AE) signals expected from inclusion fracture during fatigue testing of 7075 aluminum has been estimated on the basis of previous measurements of AE produced by the fracture of boron particles incorporated into 2219 aluminum. The AF signal size expected from deformation in the plastic zone ahead of the fatigue crack was estimated from the results of tensile tests on 7075 aluminum. The signals predicted from both processes are near or below the noise level in the fatigue experiments and are therefore far too small to account for the signals actually observed. Nearly simultaneous fracture of multiple inclusions could produce signals as large as those observed in fatigue tests of 7075 aluminum, however, fatigue tests of 7050 aluminum produced signals as large or larger than in 7075. Since 7050 has substantially fewer inclusions than 7075, the simultaneous failure of multiple inclusions is unlikely to be a major AE source in fatigue testing of either aluminum alloy. Thus, the most probable source of acoustic emission during fatigue testing of 7075 and 7050 aluminum is the crack advance itself. The measured crack advance per cycle is large enough to release sufficient elastic energy to account for the AE signals observed.

Fretting Fatigue with Cylindrical-On-Flat Contact: Crack Nucleation, Crack Path and Fatigue Life

PubMed Central

Noraphaiphipaksa, Nitikorn; Manonukul, Anchalee; Kanchanomai, Chaosuan

2017-01-01

Fretting fatigue experiments and finite element analysis were carried out to investigate the influence of cylindrical-on-flat contact on crack nucleation, crack path and fatigue life of medium-carbon steel. The location of crack nucleation was predicted using the maximum shear stress range criterion and the maximum relative slip amplitude criterion. The prediction using the maximum relative slip amplitude criterion gave the better agreement with the experimental result, and should be used for the prediction of the location of crack nucleation. Crack openings under compressive bulk stresses were found in the fretting fatigues with flat-on-flat contact and cylindrical-on-flat contacts, i.e., fretting-contact-induced crack openings. The crack opening stress of specimen with flat-on-flat contact was lower than those of specimens with cylindrical-on-flat contacts, while that of specimen with 60-mm radius contact pad was lower than that of specimen with 15-mm radius contact pad. The fretting fatigue lives were estimated by integrating the fatigue crack growth curve from an initial propagating crack length to a critical crack length. The predictions of fretting fatigue life with consideration of crack opening were in good agreement with the experimental results. PMID:28772522

Compassion fatigue among pediatric healthcare providers.

PubMed

Branch, Carole; Klinkenberg, Dean

2015-01-01

Compassion fatigue is a term used to describe the unique stressors affecting people in caregiving professions. For nurses and other direct care providers, the impact of compassion fatigue may result in stress-related symptoms, job dissatisfaction, decreased productivity, decreased patient satisfaction scores, safety issues, and job turnover. Those who care for seriously ill children and their families are at increased risk for compassion fatigue. Constant exposure to children who are suffering, in combination with work place stressors and personal issues, may contribute to the development of compassion fatigue. The Professional Quality of Life Scale Version 5 was used to determine the risk for compassion fatigue among 296 direct care providers at St. Louis Children's Hospital. Compassion satisfaction, burnout, and secondary traumatic stress scores did not differ by age, work category, level of education, or work experience. There were, however, significant differences in scores as a function of nursing unit. Nurses who work in the pediatric intensive care unit reported lower compassion satisfaction scores, and higher burnout and secondary traumatic stress scores. Results demonstrated the risk for compassion fatigue and provided data necessary to support development of a compassion fatigue program for direct care providers.

Visual-motor recalibration in geographical slant perception

NASA Technical Reports Server (NTRS)

Bhalla, M.; Proffitt, D. R.; Kaiser, M. K. (Principal Investigator)

1999-01-01

In 4 experiments, it was shown that hills appear steeper to people who are encumbered by wearing a heavy backpack (Experiment 1), are fatigued (Experiment 2), are of low physical fitness (Experiment 3), or are elderly and/or in declining health (Experiment 4). Visually guided actions are unaffected by these manipulations of physiological potential. Although dissociable, the awareness and action systems were also shown to be interconnected. Recalibration of the transformation relating awareness and actions was found to occur over long-term changes in physiological potential (fitness level, age, and health) but not with transitory changes (fatigue and load). Findings are discussed in terms of a time-dependent coordination between the separate systems that control explicit visual awareness and visually guided action.

Metabolic Myopathies and Physical Activity: When Fatigue Is More Than Simple Exertion.

ERIC Educational Resources Information Center

Tarnopolsky, Mark A.

2002-01-01

When patients experience fatigue and muscle cramps beyond exercise adaptation, physicians should consider metabolic myopathies. The most common conditions seen in active patients are myoadenylate deaminase deficiency and disorders such as McArdle's disease. Targeted family histories and basic laboratory studies help rule out conditions mimicking…

Sites of Failure in Muscle Fatigue

DTIC Science & Technology

2001-10-25

anticipate to the taps. At the beginning of the experiment, tapping force was gradually increased until significant triceps muscle contraction was elicited...367-374, 1986. [11] J. A. Stephens and A. Taylor, "Fatigue of maintained voluntary muscle contraction in man," J. Physiol. (London), vol. 220, pp. 1-18, 1972.

Measurements of Humidity in the Atmosphere and Validation Experiments (Mohave, Mohave II): Results Overview

NASA Technical Reports Server (NTRS)

Leblanc, Thierry; McDermid, Iain S.; McGee, Thomas G.; Twigg, Laurence W.; Sumnicht, Grant K.; Whiteman, David N.; Rush, Kurt D.; Cadirola, Martin P.; Venable, Demetrius D.; Connell, R.;

Prediction of composite fatigue life under variable amplitude loading using artificial neural network trained by genetic algorithm

NASA Astrophysics Data System (ADS)

Rohman, Muhamad Nur; Hidayat, Mas Irfan P.; Purniawan, Agung

2018-04-01

Neural networks (NN) have been widely used in application of fatigue life prediction. In the use of fatigue life prediction for polymeric-base composite, development of NN model is necessary with respect to the limited fatigue data and applicable to be used to predict the fatigue life under varying stress amplitudes in the different stress ratios. In the present paper, Multilayer-Perceptrons (MLP) model of neural network is developed, and Genetic Algorithm was employed to optimize the respective weights of NN for prediction of polymeric-base composite materials under variable amplitude loading. From the simulation result obtained with two different composite systems, named E-glass fabrics/epoxy (layups [(±45)/(0)2]S), and E-glass/polyester (layups [90/0/±45/0]S), NN model were trained with fatigue data from two different stress ratios, which represent limited fatigue data, can be used to predict another four and seven stress ratios respectively, with high accuracy of fatigue life prediction. The accuracy of NN prediction were quantified with the small value of mean square error (MSE). When using 33% from the total fatigue data for training, the NN model able to produce high accuracy for all stress ratios. When using less fatigue data during training (22% from the total fatigue data), the NN model still able to produce high coefficient of determination between the prediction result compared with obtained by experiment.

Evaluating Fatigue in Operational Settings: The NASA Ames Fatigue Countermeasures Program

NASA Technical Reports Server (NTRS)

Rosekind, Mark R.; Gregory, Kevin; Miller, Donna; Webbon, Lissa; Oyung, Ray

1996-01-01

In response to a 1980 Congressional request, NASA Ames initiated a program to examine fatigue in flight operations. The Program objectives are to examine fatigue, sleep loss, and circadian disruption in flight operations, determine the effects of these factors on flight crew performance, and the development of fatigue countermeasures. The NASA Ames Fatigue Countermeasures Program conducts controlled laboratory experiments, full-mission flight simulations, and field studies. A range of subjective, behavioral, performance, physiological, and environmental measures are used depending on study objectives. The Program has developed substantial expertise in gathering data during actual flight operations and in other work settings. This has required the development of ambulatory and other measures that can be carried throughout the world and used at 41,000 feet in aircraft cockpits. The NASA Ames Fatigue Countermeasures Program has examined fatigue in shorthaul, longhaul, overnight cargo, and helicopter operations. A recent study of planned cockpit rest periods demonstrated the effectiveness of a brief inflight nap to improve pilot performance and alertness. This study involved inflight reaction time/vigilance performance testing and EEG/EOG measures of physiological alertness. The NASA Ames Fatigue Countermeasures Program has applied scientific findings to the development of education and training materials on fatigue countermeasures, input to federal regulatory activities on pilot flight, duty, and rest requirements, and support of National Transportation Safety Board accident investigations. Current activities are examining fatigue in nonaugmented longhaul flights, regional/commuter flight operations, corporate/business aviation, and psychophysiological variables related to performance.

Effect of cooling rate during hot stamping on low cyclic fatigue of boron steel sheet

NASA Astrophysics Data System (ADS)

Suh, Chang Hee; Jang, Won Seok; Oh, Sang Kyun; Lee, Rac Gyu; Jung, Yun-Chul; Kim, Young Suk

2012-08-01

Boron steel is widely used throughout the automobile industry due to its high tensile strength and hardenability. When boron steel is used for body parts, only high strength is required for crashworthiness. However, when boron steel is used for chassis parts, a high fatigue life is needed. The microstructure of boron steel is mainly affected by the cooling rate during hot stamping. Therefore, this study investigated the low cyclic fatigue life according to the cooling rate. The fatigue life increased at a low strain amplitude when the cooling rate was fast. However, at a high strain amplitude, the fatigue life decreased, due to the low ductility and fracture toughness of the martensite formed by rapid cooling. Martensite formed by a fast cooling rate shows excellent fatigue life at a low total strain amplitude; however, a multiphase microstructure formed by a slow cooling rate is recommended if the parts experience high and low total strain amplitudes alternately. In addition, the cooling rate has little effect on the distribution of solute boron and boron precipitations, so it is expected that boron rarely affects low cyclic fatigue.

Crack propagation analysis and fatigue life prediction for structural alloy steel based on metal magnetic memory testing

NASA Astrophysics Data System (ADS)

Ni, Chen; Hua, Lin; Wang, Xiaokai

2018-09-01

To monitor the crack propagation and predict the fatigue life of ferromagnetic material, the metal magnetic memory (MMM) testing was carried out to the single edge notched specimen made from structural alloy steel under three-point bending fatigue experiment in this paper. The variation of magnetic memory signal Hp (y) in process of fatigue crack propagation was investigated. The gradient K of Hp (y) was investigated and compared with the stress of specimen obtained by finite element analysis. It indicated that the gradient K can qualitatively reflect the distribution and variation of stress. The maximum gradient Kmax and crack size showed a good linear relationship, which indicated that the crack propagation can be estimated by MMM testing. Furthermore, the damage model represented by magnetic memory characteristic was created and a fatigue life prediction method was developed. The fatigue life can be evaluated by the relationship between damage parameter and normalized life. The method was also verified by another specimen. Because of MMM testing, it provided a new approach for predicting fatigue life.

A Self-Adaptive Dynamic Recognition Model for Fatigue Driving Based on Multi-Source Information and Two Levels of Fusion

PubMed Central

Sun, Wei; Zhang, Xiaorui; Peeta, Srinivas; He, Xiaozheng; Li, Yongfu; Zhu, Senlai

2015-01-01

To improve the effectiveness and robustness of fatigue driving recognition, a self-adaptive dynamic recognition model is proposed that incorporates information from multiple sources and involves two sequential levels of fusion, constructed at the feature level and the decision level. Compared with existing models, the proposed model introduces a dynamic basic probability assignment (BPA) to the decision-level fusion such that the weight of each feature source can change dynamically with the real-time fatigue feature measurements. Further, the proposed model can combine the fatigue state at the previous time step in the decision-level fusion to improve the robustness of the fatigue driving recognition. An improved correction strategy of the BPA is also proposed to accommodate the decision conflict caused by external disturbances. Results from field experiments demonstrate that the effectiveness and robustness of the proposed model are better than those of models based on a single fatigue feature and/or single-source information fusion, especially when the most effective fatigue features are used in the proposed model. PMID:26393615

Fatigue in osteoarthritis: a qualitative study

PubMed Central

Power, J Denise; Badley, Elizabeth M; French, Melissa R; Wall, Angela J; Hawker, Gillian A

2008-01-01

Background Fatigue is recognized as a disabling symptom in many chronic conditions including rheumatic disorders such as rheumatoid arthritis (RA) and lupus. Fatigue in osteoarthritis (OA) is not routinely evaluated and has only been considered in a very limited number of studies. To date, these studies have focused primarily on patients with OA under rheumatological care, which represent the minority of people living with OA. The purpose of this study was to increase our understanding of the fatigue experience in community dwelling people with OA. Methods In 2004, 8 focus groups were conducted with 28 men and 18 women (mean age 72.3) with symptomatic hip or knee OA recruited from a population-based cohort. Participants completed a self-administered questionnaire, which included demographics, measures of OA severity (WOMAC), depression (CES-D) and fatigue (FACIT). Sessions were audio taped and transcribed verbatim. Two researchers independently reviewed the transcripts to identify themes. Findings were compared and consensus reached. Results Mean pain, disability, depression and fatigue scores were 8.7/20, 27.8/68, 15.4/60, and 30.9/52, respectively. Participants described their fatigue as exhaustion, being tired and "coming up against a brick wall". Participants generally perceived fatigue as different from sleepiness and distinguished physical from mental fatigue. Factors believed to increase fatigue included OA pain and pain medications, aging, various types of weather and poor sleep. Mental health was identified as both affecting fatigue and being affected by fatigue. Participants described fatigue as impacting physical function, and their ability to participate in social activities and to do household chores. Rest, exercise, and avoiding or getting assistance with activities were cited as ways of coping. Participants generally did not discuss their fatigue with anyone except their spouses. Conclusion Participants with OA described experiencing notable amounts of fatigue and indicated that it had a substantial impact on their lives. Further research is required to better understand the role of fatigue in OA in order to identify strategies to reduce its impact. PMID:18452607

Exercise‐induced homeostatic perturbations provoked by singles tennis match play with reference to development of fatigue

PubMed Central

Mendez‐Villanueva, Alberto; Fernandez‐Fernandez, Jaime; Bishop, David

2007-01-01

This review addresses metabolic, neural, mechanical and thermal alterations during tennis match play with special focus on associations with fatigue. Several studies have provided a link between fatigue and the impairment of tennis skills proficiency. A tennis player's ability to maintain skilled on‐court performance and/or optimal muscle function during a demanding match can be compromised as a result of several homeostatic perturbations, for example hypoglycaemia, muscle damage and hyperthermia. Accordingly, an important physiological requirement to succeed at competitive level might be the player's ability to resist fatigue. However, research evidence on this topic is limited and it is unclear to what extent players experience fatigue during high‐level tennis match play and what the physiological mechanisms are that are likely to contribute to the deterioration in performance. PMID:17957005

Cancer-related fatigue: can exercise physiology assist oncologists?

PubMed

Lucía, Alejandro; Earnest, Conrad; Pérez, Margarita

2003-10-01

Most patients with cancer experience fatigue, a severe activity-limiting symptom with a multifactorial origin. To avoid cancer-related fatigue, patients are frequently advised to seek periods of rest and to reduce their amount of physical activity. This advice is reminiscent of that formerly given to patients with heart disease. However, such recommendations can paradoxically compound symptoms of fatigue, since sedentary habits induce muscle catabolism and thus cause a further decrease in functional capacity. By contrast, there is scientific evidence that an exercise programme of low to moderate intensity can substantially reduce cancer-related fatigue and improve the quality of life of these patients. Current knowledge, combined with findings soon to be published, could launch new opportunities for patients with cancer. In this new century, exercise physiology could soon prove to be very useful for oncologists.

Activity Patterns in Response to Symptoms in Patients Being Treated for Chronic Fatigue Syndrome: An Experience Sampling Methodology Study

PubMed Central

2016-01-01

Objective: Cognitive–behavioral models of chronic fatigue syndrome (CFS) propose that patients respond to symptoms with 2 predominant activity patterns—activity limitation and all-or-nothing behaviors—both of which may contribute to illness persistence. The current study investigated whether activity patterns occurred at the same time as, or followed on from, patient symptom experience and affect. Method: Twenty-three adults with CFS were recruited from U.K. CFS services. Experience sampling methodology (ESM) was used to assess fluctuations in patient symptom experience, affect, and activity management patterns over 10 assessments per day for a total of 6 days. Assessments were conducted within patients’ daily life and were delivered through an app on touchscreen Android mobile phones. Multilevel model analyses were conducted to examine the role of self-reported patient fatigue, pain, and affect as predictors of change in activity patterns at the same and subsequent assessment. Results: Current experience of fatigue-related symptoms and pain predicted higher patient activity limitation at the current and subsequent assessments whereas subjective wellness predicted higher all-or-nothing behavior at both times. Current pain predicted less all-or-nothing behavior at the subsequent assessment. In contrast to hypotheses, current positive affect was predictive of current activity limitation whereas current negative affect was predictive of current all-or-nothing behavior. Both activity patterns varied at the momentary level. Conclusions: Patient symptom experiences appear to be driving patient activity management patterns in line with the cognitive–behavioral model of CFS. ESM offers a useful method for examining multiple interacting variables within the context of patients’ daily life. PMID:27819461

Crew Factors in Flight Operations. 8; A Survey of Fatigue Factors in Corporate/Executive A Viation Operations

NASA Technical Reports Server (NTRS)

Rosekind, Mark R.; Co, Elizabeth L.; Gregory, Kevin B.; Miller, Donna L.

2000-01-01

Corporate flight crews face unique challenges including unscheduled flights, quickly changing schedules, extended duty days, long waits, time zone changes, and peripheral tasks. Most corporate operations are regulated by Part 91 FARs which set no flight or duty time limits. The objective of this study was to identify operationally significant factors that may influence fatigue, alertness, and performance in corporate operations. In collaboration with the National Business Aircraft Association and the Flight Safety Foundation, NASA developed and distributed a retrospective survey comprising 107 questions addressing demographics, home sleep habits, flight experience, duty schedules, fatigue during operations, and work environment. Corporate crewmembers returned 1,488 surveys. Respondents averaged 45.2 years of age, had 14.9 years of corporate flying experience, and 9,750 total flight hours. The majority (89%) rated themselves as 'good' or 'very good' sleepers at home. Most (82%) indicated they are subject to call for duty and described an average duty day of 9.9 h. About two-thirds reported having a daily duty time limit and over half (57%) reported a daily flight time limit. Nearly three-quarters (71%) acknowledged having 'nodded off' during a flight. Only 21% reported that their flight departments offer training on fatigue issues. Almost three-quarters (74%) described fatigue as a 'moderate' or 'serious' concern, and a majority (61%) characterized it as a common occurrence. Most (85%) identified fatigue as a 'moderate' or 'serious' safety issue.

Prevalence of physical symptoms of itch, pain and fatigue in patients with skin diseases in general practice.

PubMed

Verhoeven, E W M; Kraaimaat, F W; van de Kerkhof, P C M; van Weel, C; Duller, P; van der Valk, P G M; van den Hoogen, H J M; Bor, J H J; Schers, H J; Evers, A W M

2007-06-01

Physical symptoms of skin diseases have been shown to negatively affect patients' wellbeing. Although insight into physical symptoms accompanying skin diseases is relevant for the management and treatment of skin diseases, the prevalence of physical symptoms among patients with skin diseases is a rather unexplored territory. The goal of the present study was to examine the prevalence of physical symptoms of itch, pain and fatigue in patients with skin diseases. On the basis of a systematic morbidity registration system in primary care, questionnaires were sent to 826 patients with skin diseases. Eventually, questionnaires from 492 patients were suitable for our analyses. Results indicated that patients with skin diseases particularly experience symptoms of itch and fatigue. Approximately 50% of all patients report experiencing these symptoms and about 25% experience these symptoms as relatively severe. Pain was relatively less frequently reported by 23% of all patients, and was on average somewhat less intense. The physical symptoms showed relatively strong correlations with disease-related quality of life and self-reported disease severity. In contrast, only moderate correlations were found with comorbidity and demographic variables, which suggests that the physical symptoms of itch, pain and fatigue are consequences of the skin diseases. Itch and fatigue and, to a somewhat lesser extent, pain have a high prevalence among patients with skin diseases. Clinicians should be encouraged to carefully assess itch, pain and fatigue in patients with skin diseases, and where appropriate focus treatment to these symptoms.

Comprehensively understanding fatigue in patients with myeloproliferative neoplasms.

PubMed

Scherber, Robyn M; Kosiorek, Heidi E; Senyak, Zhenya; Dueck, Amylou C; Clark, Matthew M; Boxer, Michael A; Geyer, Holly L; McCallister, Archie; Cotter, Mary; Van Husen, Barbara; Harrison, Claire N; Mesa, Ruben A

2016-02-01

Patients with myeloproliferative neoplasms (MPNs) experience a high persistence, prevalence, and severity of fatigue. There is currently only limited information regarding factors that contribute to fatigue in patients with MPNs. A 70-item, Internet-based survey regarding fatigue was developed by MPN investigators and patients/advocates and hosted by the Mayo Clinic Survey Research Center. Fatigue was found to be prevalent and severe among international survey respondents (1788 respondents). Higher body mass index (P<.001), current use of alcohol (P<.001), and current tobacco use (P = .0025) were found to be significantly associated with greater fatigue. Moderate/severe fatigue was present more frequently in those individuals who did not exercise compared with those who reported exercising at least once per week (P<.001). Medical comorbidities found to be significantly associated with greater fatigue included restless leg syndrome (P = .006), diabetes mellitus (P = .045), fibromyalgia (P < 0.001), chronic fatigue syndrome (P = .006), and chronic kidney disease (P = .02). Current use of antidepressants (P<.001), antihistamines (P = .0276), antianxiety medications (P = .0357), and prescription pain medications (P<.001) were found to be associated with worsened fatigue. Nearly 25% of respondents scored > 2 on the Patient Health Questionnaire, indicating a high probability of depression. Higher Brief Fatigue Inventory score, Myeloproliferative Neoplasm Total Symptom Score, and individual symptom items were all associated with a higher likelihood of depressive symptoms (P<.0001). The management of fatigue should be multifactorial, with a comprehensive assessment and treatment plan to address all modifiable fatigue etiologies. Patients with MPNs likely have a higher prevalence of mood disturbances compared with the general population, suggesting the need to assess and intervene in this domain. © 2015 American Cancer Society.

Effect of micromorphology at the fatigue crack tip on the crack growth in electron beam welded Ti-6Al-4V joint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tao, Junhui; Hu, Shubing, E-mail: 187352581@qq.com

In this paper, we describe experiments on welded joints of Ti-6Al-4V alloy specimens exhibiting fatigue characteristics in the base metal (BM), hot affected zone (HAZ) and fuse zone (FZ). The effect of micromorphology on crack propagation at the tip of the fatigue crack in joints formed by electron beam welding was investigated using an optical microscope, transmission electron microscope and other methodologies. The results demonstrated that the fatigue crack originated in and propagated along α/β boundaries in the BM. In the HAZ, the fatigue crack occurred at the boundary between martensite laths, and propagated through most irregular-equiaxed α phases andmore » a few martensite laths. In the FZ, the fatigue crack originated at the boundaries between the fine crushing phases among martensite laths, and propagated along a majority of α/β boundaries and several narrow martensite laths. The electron beam welded joint of Ti-6Al-4V alloy showed instances of zigzag fatigue cracks that increased in degree from lowest in the HAZ, moderate in the FZ to greatest in the BM. Conversely, fatigue crack growth rate (FCGR) was greatest in the HAZ, less in the FZ and slowest in the BM. - Highlights: •Ti-6Al-4V welded joint exhibits different fatigue characteristics. •The fatigue crack propagates along α/β boundaries in the BM. •The fatigue crack propagates through α phases and martensite laths in the HAZ. •The fatigue crack propagates along α/β boundaries and martensite laths in the FZ. •Fatigue crack growth rate is fastest in the HAZ, less in the FZ, slowest in the BM.« less

Fatigue, depression, sleep, and activity during chemotherapy: daily and intraday variation and relationships among symptom changes.

PubMed

Jim, Heather S L; Small, Brent; Faul, Leigh Anne; Franzen, Jamie; Apte, Sachin; Jacobsen, Paul B

2011-12-01

Previous research suggests that cancer patients frequently experience multiple symptoms during chemotherapy; however, relationships among symptom changes are largely unknown. The aim of the current study was to examine daily and intraday changes and interrelationships among fatigue, depression, and objectively measured disruptions in sleep and activity during chemotherapy. Participants were 78 women with gynecologic cancer. Fatigue, depression, sleep, and activity were assessed the week before and the week after the participants' first three infusions. Significant changes in fatigue, depression, sleep, and activity were observed over time. Before infusions, increases in fatigue were associated with increases in depression. After infusions, increases in fatigue were associated with increases in depression and minutes awake at night, as well as decreases in daytime activity and regularity of sleep/activity patterns (ps < .05). This study is among the first to track daily and intraday changes in symptoms and interrelationships during chemotherapy. Results indicate that symptoms are interrelated and return to baseline levels after infusions.

Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys

NASA Astrophysics Data System (ADS)

Seifi, Mohsen; Li, Dongyue; Yong, Zhang; Liaw, Peter K.; Lewandowski, John J.

2015-08-01

The fracture toughness and fatigue crack growth behavior of two as-vacuum arc cast high-entropy alloys (HEAs) (Al0.2CrFeNiTi0.2 and AlCrFeNi2Cu) were determined. A microstructure examination of both HEA alloys revealed a two-phase structure consisting of body-centered cubic (bcc) and face-centered cubic (fcc) phases. The notched and fatigue precracked toughness values were in the range of those reported in the literature for two-phase alloys but significantly less than recent reports on a single phase fcc-HEA that was deformation processed. Fatigue crack growth experiments revealed high fatigue thresholds that decreased significantly with an increase in load ratio, while Paris law slopes exhibited metallic-like behavior at low R with significant increases at high R. Fracture surface examinations revealed combinations of brittle and ductile/dimpled regions at overload, with some evidence of fatigue striations in the Paris law regime.

Probabilistic Material Strength Degradation Model for Inconel 718 Components Subjected to High Temperature, High-Cycle and Low-Cycle Mechanical Fatigue, Creep and Thermal Fatigue Effects

NASA Technical Reports Server (NTRS)

Bast, Callie C.; Boyce, Lola

1995-01-01

The development of methodology for a probabilistic material strength degradation is described. The probabilistic model, in the form of a postulated randomized multifactor equation, provides for quantification of uncertainty in the lifetime material strength of aerospace propulsion system components subjected to a number of diverse random effects. This model is embodied in the computer program entitled PROMISS, which can include up to eighteen different effects. Presently, the model includes five effects that typically reduce lifetime strength: high temperature, high-cycle mechanical fatigue, low-cycle mechanical fatigue, creep and thermal fatigue. Results, in the form of cumulative distribution functions, illustrated the sensitivity of lifetime strength to any current value of an effect. In addition, verification studies comparing predictions of high-cycle mechanical fatigue and high temperature effects with experiments are presented. Results from this limited verification study strongly supported that material degradation can be represented by randomized multifactor interaction models.

The formation method of the feature space for the identification of fatigued bills

NASA Astrophysics Data System (ADS)

Kang, Dongshik; Oshiro, Ayumu; Ozawa, Kenji; Mitsui, Ikugo

2014-10-01

Fatigued bills make a trouble such as the paper jam in a bill handling machine. In the discrimination of fatigued bills using an acoustic signal, the variation of an observed bill sound is considered to be one of causes in misclassification. Therefore a technique has demanded in order to make the classification of fatigued bills more efficient. In this paper, we proposed the algorithm that extracted feature quantity of bill sound from acoustic signal using the frequency difference, and carried out discrimination experiment of fatigued bill money by Support Vector Machine(SVM). The feature quantity of frequency difference can represent the frequency components of an acoustic signal is varied by the fatigued degree of bill money. The generalization performance of SVM does not depend on the size of dimensions of the feature space, even in a high dimensional feature space such as bill-acoustic signals. Furthermore, SVM can induce an optimal classifier which considers the combination of features by the virtue of polynomial kernel functions.

The effect of histamine on changes in mental energy and fatigue after a single bout of exercise.

PubMed

Loy, Bryan D; O'Connor, Patrick J

2016-01-01

The purpose of this research was to determine if histamine, acting on brain H1 receptors, influences changes in feelings of energy and fatigue or cognitive test performance after acute exercise. Women (n=20) with low vigor and high fatigue were administered the H1 antagonist drug doxepin hydrocholoride (6 mg) in tomato juice and tomato juice alone (placebo) in a randomized, double-blinded, cross-over experiment before performing 30 min of light intensity cycling exercise and completing energy, fatigue, sleepiness, and motivation scales, and cognitive tasks. After exercise, mental fatigue increased for the doxepin condition (p=0.014) but not placebo (p=0.700), while mental energy decreased for both PLA and DOX (p<0.001) and cognitive task performance was unaffected. It is inferred that histamine binding to H1 receptors in the brain has a role in exercise-induced reductions in mental fatigue, but not increases in energy. Copyright © 2015 Elsevier Inc. All rights reserved.

Identifying patterns of adaptation in breast cancer patients with cancer-related fatigue using response shift analyses at subgroup level.

PubMed

Salmon, Maxime; Blanchin, Myriam; Rotonda, Christine; Guillemin, Francis; Sébille, Véronique

2017-11-01

Fatigue is the most prevalent symptom in breast cancer. It might be perceived differently among patients over time as a consequence of the differing patients' adaptation and psychological adjustment to their cancer experience which can be related to response shift (RS). RS analyses can provide important insights on patients' adaptation to cancer but it is usually assumed that RS occurs in the same way in all individuals which is unrealistic. This study aimed to identify patients' subgroups in which different RS effects on self-reported fatigue could occur over time using a combination of methods for manifest and latent variables. The FATSEIN study comprised 466 breast cancer patients followed over a 2-year period. Fatigue was measured with the Multidimensional Fatigue Inventory questionnaire (MFI-20) during 10 visits. A novel combination of Mixed Models, Growth Mixture Modeling, and Structural Equation Modeling was used to assess the occurrence of RS in fatigue changes to identify subgroups displaying different RS patterns over time. An increase in fatigue was evidenced over the 8-month follow-up, followed by a decrease between the 8- and 24-month. Four latent classes of patients were identified. Different RS patterns were detected in all latent classes between the inclusion and 8 months (last cycle of chemotherapy). No RS was evidenced between 8- and 24-month. Several RS effects were evidenced in different groups of patients. Women seemed to adapt differently to their treatment and breast cancer experience possibly indicating differing needs for medical/psychological support. © 2017 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

[Counseling in the prevention of fatigue in psychiatric nurses].

PubMed

Greeff, M; Poggenpoel, M

1991-12-01

Nursing is a stressful activity and therefore it is necessary for nurses to develop effective coping mechanisms, or to strengthen existing ones in a healthy manner, in order to be capable of dealing with stress, arising from their personal and professional lives. It is, however, not solely stress itself which predisposes nurses to fatigue (physical, psychological and emotional exhaustion) but rather the chronic nature and excessive amount of stressors which place excessive demands on the energy resources and coping, mechanisms of nurses resulting in the ineffective handling of stress which in turn leads to the eventual development of fatigue. The detrimental results of this experience are, however, not confined to the nurse herself, but extends further to the patient and the organization. Thus, if fatigue is not controlled or dealt with, all parties and organizations concerned could suffer. This research covers the accompaniment function of the psychiatric nurse specialist in the prevention of fatigue in psychiatric nurses by strengthening their mental preparedness. As a possible solution to the experience of fatigue, a structured, accompanied program of three days was offered to a group of psychiatric nurses. The Solomon four group design was followed in order to eliminate influences on the subjects resulting from the completion of the self-evaluation scale as pre-test. The data which was obtained from the test results was statistically compared. Results showed that there was a definite decrease in the levels of fatigue experienced by the experimental group that received the structured accompanied programme, but no real change occurred in the control group that had merely been provided with relevant literature.(ABSTRACT TRUNCATED AT 250 WORDS)

Predictors of Compassion Fatigue and Compassion Satisfaction in Acute Care Nurses.

PubMed

Kelly, Lesly; Runge, Jody; Spencer, Christina

2015-11-01

To examine compassion fatigue and compassion satisfaction in acute care nurses across multiple specialties in a hospital-based setting. A cross-sectional electronic survey design was used to collect data from direct care nurses in a 700-bed, quaternary care, teaching facility in the southwestern United States. A total of 491 direct care registered nurses completed a survey measuring their professional quality of life (burnout, secondary traumatic stress, and compassion satisfaction). Analysis was conducted to assess for differences between demographics, specialties, job satisfaction, and intent to leave their current position. Significant predictors of burnout included lack of meaningful recognition, nurses with more years of experience, and nurses in the "Millennial" generation (ages 21-33 years). Receiving meaningful recognition, higher job satisfaction, nurses in the "Baby Boomer" generation (ages 50-65 years), and nurses with fewer years of experience significantly predicted compassion satisfaction. No significant differences were noted across nurse specialties, units, or departments. This study adds to the literature the impact meaningful recognition may have on compassion satisfaction and fatigue. Our findings provide a potential explanation for the lack of retention of nurses in the millennial generation who leave their positions with limited years of experience. Based on our research, meaningful recognition may increase compassion satisfaction, positively impact retention, and elevate job satisfaction. Compassion fatigue in nurses has clear implications for nursing retention and the quality of care. Organizations willing to invest in reducing compassion fatigue have the potential to improve financial savings by reducing turnover and adverse events associated with burnout. © 2015 Sigma Theta Tau International.

Description of gas/particle sorption kinetics with an intraparticle diffusion model: Desorption experiments

USGS Publications Warehouse

Rounds, S.A.; Tiffany, B.A.; Pankow, J.F.

1993-01-01

Aerosol particles from a highway tunnel were collected on a Teflon membrane filter (TMF) using standard techniques. Sorbed organic compounds were then desorbed for 28 days by passing clean nitrogen through the filter. Volatile n-alkanes and polycyclic aromatic hydrocarbons (PAHs) were liberated from the filter quickly; only a small fraction of the less volatile ra-alkanes and PAHs were desorbed. A nonlinear least-squares method was used to fit an intraparticle diffusion model to the experimental data. Two fitting parameters were used: the gas/particle partition coefficient (Kp and an effective intraparticle diffusion coefficient (Oeff). Optimized values of Kp are in agreement with previously reported values. The slope of a correlation between the fitted values of Deff and Kp agrees well with theory, but the absolute values of Deff are a factor of ???106 smaller than predicted for sorption-retarded, gaseous diffusion. Slow transport through an organic or solid phase within the particles or preferential flow through the bed of particulate matter on the filter might be the cause of these very small effective diffusion coefficients. ?? 1993 American Chemical Society.

Learning to control an SSVEP-based BCI speller in naïve subjects.

PubMed

Zhihua Tang; Yijun Wang; Guoya Dong; Weihua Pei; Hongda Chen

2017-07-01

High-speed steady-state visual evoked potential (SSVEP)-based brain-computer interface (BCI) has been demonstrated in several recent studies. This study aimed to investigate some issues regarding feasibility of learning to control an SSVEP-based BCI speller in naïve subjects. An experiment with new BCI users was designed to answer the following questions: (1) How many people can use the SSVEP-BCI speller? (2) How much time is required to train the user? (3) Does continuous system use lead to user fatigue and deteriorated BCI performance? The experiment consisted of three tasks including a 40-class BCI spelling task, a psychomotor vigilance test (PVT) task, and a test of sleepiness scale. Subjects' reaction time (RT) in the PVT task and the fatigue rank in the sleepiness scale test were used as objective and subjective parameters to evaluate subjects' alertness level. Among 11 naïve subjects, 10 of them fulfilled the 9-block experiment. Four of them showed clear learning effects (i.e., an increasing trend of classification accuracy and information transfer rate (ITR)) over time. The remaining subjects showed stable BCI performance during the whole experiment. The results of RT and fatigue rank showed a gradually increasing trend, which is not significant across blocks. In summary, the results of this study suggest that controlling an SSVEP-based BCI speller is in general feasible to learn by naïve subjects after a short training procedure, showing no clear performance deterioration related to fatigue.

Fatigue in children with cancer at the end of life.

PubMed

Ullrich, Christina K; Dussel, Veronica; Hilden, Joanne M; Sheaffer, Jan W; Moore, Caron L; Berde, Charles B; Wolfe, Joanne

2010-10-01

Fatigue is a prevalent source of suffering in children with advanced cancer; yet, little is known about it. This study aimed to describe fatigue experienced by children with advanced cancer and to identify the factors associated with suffering from fatigue and its treatment. A retrospective cross-sectional study of 141 parents of children who died of cancer (response rate: 64%) was conducted in two tertiary-level U.S. pediatric hospitals. By parent report, 96% of children experienced fatigue in the last month of life. Nearly 50% experienced significant suffering from fatigue; this was associated with suffering from pain, dyspnea, anorexia, nausea/vomiting, diarrhea, anxiety, sadness, or fear (P<0.05), and with side effects from pain or dyspnea treatment (P<0.05). In multivariate analysis of symptom-related factors, suffering from nausea/vomiting (odds ratio [OR]=3.93, 95% confidence interval [CI]=1.23-12.61, P=0.02); anorexia (OR=7.52, 95% CI=1.87-30.25, P=0.005); and fear (OR=5.13, 95% CI=2.03-12.96, P ≤ 0.001) remained independently associated with fatigue. Children suffering from fatigue had primary oncologists with fewer years' experience than children who did not suffer from fatigue (mean=7.7 years, standard deviation [SD]=4.9 vs. mean of 9.9 years, SD=6.0, P=0.02). Among children with fatigue, 17 of 129 (13%) received fatigue-directed treatment, which was successful in 3 of 12 (25%). Children experiencing side effects from dyspnea or pain treatment were more likely to be treated for fatigue (relative risk=1.25, 95% CI=1.06-1.47, P=0.009). Fatigue is a common source of suffering in children with cancer at the end of life. Palliation of this symptom is rarely successful. Increased attention to factors associated with fatigue and effective interventions to ameliorate fatigue are needed. Copyright © 2010 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holcomb, Gordon R.

A presentation of the US-UK Phase 3 Task 1 Oxidation in Supercritical Fluids. Includes slides on Supercritical Steam, sCO 2 Power Cycles – Indirect, sCO 2 Power Cycles – Direct, Experimental Exposures, Alloys, Why Si, Results—Ni-xCr Alloys (5-24Cr), Fatigue Crack Growth$-$Experiment, and Alloys and Samples, Fatigue Crack Growth—Results (H282).

The stability of a hip fracture determines the fatigue of an intramedullary nail.

PubMed

Eberle, S; Bauer, C; Gerber, C; von Oldenburg, G; Augat, P

2010-01-01

The purpose of this study was to address the question of how the stability of a proximal hip fracture determines the fatigue and failure mechanism of an intramedullary implant. To answer this question, mechanical experiments and finite element simulations with two different loading scenarios were conducted. The two load scenarios differed in the mechanical support of the fracture by an artificial bone sleeve, representing the femoral head and neck. The experiments confirmed that an intramedullary nail fails at a lower load in an unstable fracture situation in the proximal femur than in a stable fracture. The nails with an unstable support failed at a load 28 per cent lower than the nails with a stable support by the femoral neck. Hence, the mechanical support of a fracture is crucial to the fatigue failure of an implant. The simulation showed why the fatigue fracture of the nail starts at the aperture of the lag screw. It is the location of the highest von Mises stress, which is the failure criterion for ductile materials.

Thermo-Mechanical Response of Monolithic and NiTi Shape Memory Alloy Fiber Reinforced Sn-3.8Ag-0.7Cu Solder

DTIC Science & Technology

2005-09-01

novel adaptive Tin-Silver-Copper ( SnAgCu ) solder reinforced with NiTi shape-memory alloy (particles or fiber) developed. An experimental...to meet the demands of miniaturization and enhanced performance in severe environments, a novel adaptive Tin-Silver-Copper ( SnAgCu ) solder...4. Crack region of SnAgCu solder after TMF, from reference [1] ............. 5 Figure 5. Phase diagram of 95.5Sn-3.8Ag-0.7Cu solder, from reference

Simulation and experiment of thermal fatigue in the CPV die attach

NASA Astrophysics Data System (ADS)

Bosco, Nick; Silverman, Timothy; Kurtz, Sarah

2012-10-01

FEM simulation and accelerated thermal cycling have been performed for the CPV die attach. Trends in fatigue damage accumulation and equivalent test time are explored and found to be most sensitive to temperature ramp rate. Die attach crack growth is measured through cycling and found to be in excellent agreement with simulations of the inelastic strain energy accumulated. Simulations of an entire year of weather data provides for the relative ranking of fatigue damage between four cities as well as their equivalent accelerated test time.

Aircraft Structural Fatigue. Proceedings of a Symposium held in Melbourne on 19-20 October, 1976.

DTIC Science & Technology

1977-04-01

ARL Note SM 180, 1950. 29. Head, A. K. The Growth of Fatigue Cracks. Phil . Mig.. p. 925. 1953. 30. Mann, j. V. The Effect of Surfice Finish on the...Kelly, A ,Ductile and Brittle Crystals. Tyson, ’O. R., and Phil . Mag., 15, 567, 1967. Coltr,!tl. A. H. 12. Lynch. S. P. Tensile Deformation and...49, 748, 1973. 25. Laird, C., and Crack Propagation in High Stress Fatigue. Smith, G. C. Phil . Mag., 7, 847, 1962. 26. Neumann, P. New Experiments

Influence of shear cutting parameters on the fatigue behavior of a dual-phase steel

NASA Astrophysics Data System (ADS)

Paetzold, I.; Dittmann, F.; Feistle, M.; Golle, R.; Haefele, P.; Hoffmann, H.; Volk, W.

2017-09-01

The influence of the edge condition of car body and chassis components made of steel sheet on fatigue behavior under dynamic loading presents a major challenge for automotive manufacturers and suppliers. The calculated lifetime is based on material data determined by the fatigue testing of specimens with polished edges. Prototype components are often manufactured by milling or laser cutting, whereby in practice, the series components are produced by shear cutting due to its cost-efficiency. Since the fatigue crack in such components usually starts from a shear cut edge, the calculated and experimental determined lifetime will vary due to the different conditions at the shear cut edges. Therefore, the material data determined with polished edges can result in a non-conservative component design. The aim of this study is to understand the relationship between the shear cutting process and the fatigue behavior of a dual-phase steel sheet. The geometry of the shear cut edge as well as the depth and degree of work hardening in the shear affected zone can be adjusted by using specific shear cutting parameters, such as die clearance and cutting edge radius. Stress-controlled fatigue tests of unnotched specimens were carried out to compare the fatigue behavior of different edge conditions. By evaluating the results of the fatigue experiments, influential shear cutting parameters on fatigue behavior were identified. It was possible to assess investigated shear cutting strategies regarding the fatigue behavior of a high-strength steel DP800.

Fatigue and Oxidative Stress in Children Undergoing Leukemia Treatment.

PubMed

Rodgers, Cheryl; Sanborn, Chelse; Taylor, Olga; Gundy, Patricia; Pasvogel, Alice; Moore, Ida M Ki; Hockenberry, Marilyn J

2016-10-01

Fatigue is a frequent and distressing symptom in children undergoing leukemia treatment; however, little is known about factors influencing this symptom. Antioxidants such as glutathione can decrease symptom severity in adult oncology patients, but no study has evaluated antioxidants' effects on symptoms in pediatric oncology patients. This study describes fatigue patterns and associations of fatigue with antioxidants represented by reduced glutathione (GSH) and the reduced/oxidized glutathione (GSH/GSSG) ratio among children receiving leukemia treatment. A repeated measures design assessed fatigue and antioxidants among 38 children from two large U.S. cancer centers. Fatigue was assessed among school-age children and by parent proxy among young children. Antioxidants (GSH and GSH/GSSG ratio) were assessed from cerebrospinal fluid at four phases during leukemia treatment. Young children had a steady decline of fatigue from the end of induction treatment through the continuation phase of treatment, but no significant changes were noted among the school-age children. Mean antioxidant scores varied slightly over time; however, the GSH/GSSG ratios in these children were significantly lower than the normal ratio. Mean GSH/GSSG ratios significantly correlated to fatigue scores of the school-age children during early phases of treatment. Children with low mean GSH/GSSG ratios demonstrated oxidative stress. The low ratios noted early in therapy were significantly correlated with higher fatigue scores during induction and postinduction treatment phases. This finding suggests that increased oxidative stress during the more intensive phases of therapy may explain the experience of fatigue children report. © The Author(s) 2016.

Self-critical perfectionism and its relationship to fatigue and pain in the daily flow of life in patients with chronic fatigue syndrome.

PubMed

Kempke, S; Luyten, P; Claes, S; Goossens, L; Bekaert, P; Van Wambeke, P; Van Houdenhove, B

2013-05-01

Research suggests that the personality factor of self-critical or maladaptive perfectionism may be implicated in chronic fatigue syndrome (CFS). However, it is not clear whether self-critical perfectionism (SCP) also predicts daily symptoms in CFS. Method In the present study we investigated whether SCP predicted fatigue and pain over a 14-day period in a sample of 90 CFS patients using a diary method approach. After completing the Depressive Experiences Questionnaire (DEQ) as a measure of SCP, patients were asked each day for 14 days to complete Visual Analogue Scales (VAS) of fatigue, pain and severity of depression. Data were analysed using multilevel analysis. The results from unconditional models revealed considerable fluctuations in fatigue over the 14 days, suggesting strong temporal variability in fatigue. By contrast, pain was relatively stable over time but showed significant inter-individual differences. Congruent with expectations, fixed-effect models showed that SCP was prospectively associated with higher daily fatigue and pain levels over the 14-day period, even after controlling for levels of depression. This is the first study to show that SCP predicts both fatigue and pain symptoms in CFS in the daily course of life. Hence, therapeutic interventions aimed at targeting SCP should be considered in the treatment of CFS patients with such features.

A Model of Fatigue Following Traumatic Brain Injury.

PubMed

Ponsford, Jennie; Schönberger, Michael; Rajaratnam, Shantha M W

2015-01-01

Fatigue is one of the most frequent sequelae of traumatic brain injury (TBI), although its causes are poorly understood. This study investigated the interrelationships between fatigue and sleepiness, vigilance performance, depression, and anxiety, using a structural equation modeling approach. Seventy-two participants with moderate to severe TBI (78% males) were recruited a median of 305 days postinjury. They completed the Fatigue Severity Scale, a vigilance task, the Epworth Sleepiness Scale, and Hospital Anxiety and Depression Scale. A model of the interrelationships between the study variables was developed, tested, and modified with path analysis. The modified model had a good overall fit (χ2 = 1.3, P = .54; comparative fit index = 1.0; root-mean square error of approximation = 0.0; standardized root-mean square residual = 0.02). Most paths in this model were significant (P < .05). Fatigue predicted anxiety, depression, and daytime sleepiness. Depression predicted daytime sleepiness and poor vigilance, whereas anxiety tended to predict reduced daytime sleepiness. This model confirms the complexity of fatigue experience. It supports the hypothesis that fatigue after TBI is a cause, not a consequence, of anxiety, depression, and daytime sleepiness, which, in turn (especially depression), may exacerbate fatigue by affecting cognitive functioning. These findings suggest that to alleviate fatigue, it is important to address each of these factors. However, the findings need to be confirmed with a longitudinal research design.

The interaction of fatigue, physical activity, and health-related quality of life in adults with multiple sclerosis (MS) and cardiovascular disease (CVD).

PubMed

Newland, Pamela K; Lunsford, Valerie; Flach, Alicia

2017-02-01

In addition to the underlying health problems and disability associated with multiple sclerosis (MS) and cardiovascular disease (CVD), adults with each of these chronic illnesses are independently known to experience fatigue. While fatigue's influence on physical activity and health related quality of life (HRQOL) with each of these illnesses has been discussed, what is lacking is information on how fatigue impacts physical activity and health related quality of life, and ultimately self-management for adults with these conditions. Additionally, individuals may be unaware of the significance of maintaining optimal physical activity in order to maintain everyday function and self-management. Thus, the purpose of this article is to discuss the complex effect of fatigue on physical activity and HRQOL among adults with MS and CVD, and to present potential self-management strategies. Copyright © 2016 Elsevier Inc. All rights reserved.

Psychometric evaluation of the Multidimensional Assessment of Fatigue scale for use with pregnant and postpartum women.

PubMed

Fairbrother, Nichole; Hutton, Eileen K; Stoll, Kathrin; Hall, Wendy; Kluka, Sandy

2008-06-01

Although fatigue is a common experience for pregnant women and new mothers, few measures of fatigue have been validated for use with this population. To address this gap, the authors assessed psychometric properties of the Multidimensional Assessment of Fatigue (MAF) scale, which was used in 2 independent samples of pregnant women. Results indicated that the psychometric properties of the scale were very similar across samples and time points. The scale possesses a high level of internal consistency, has good convergent validity with measures of sleep quality and depression, and discriminates well from a measure of social support. Contrary to previous evaluations of the MAF, data strongly suggest that the scale represents a unidimensional construct best represented by a single factor. Results indicate that the MAF is a useful measure of fatigue among pregnant and postpartum women.

Influence of auditory fatigue on masked speech intelligibility

NASA Technical Reports Server (NTRS)

Parker, D. E.; Martens, W. L.; Johnston, P. A.

1980-01-01

Intelligibility of PB word lists embedded in simultaneous masking noise was evaluated before and after fatiguing-noise exposure, which was determined by observing the number of words correctly repeated during a shadowing task. Both the speech signal and the masking noise were filtered to a 2825-3185-Hz band. Masking-noise leves were varied from 0- to 90-dB SL. Fatigue was produced by a 1500-3000-Hz octave band of noise at 115 dB (re 20 micron-Pa) presented continuously for 5 min. The results of three experiments indicated that speed intelligibility was reduced when the speech was presented against a background of silence but that the fatiguing-noise exposure had no effect on intelligibility when the speech was made more intense and embedded in masking noise of 40-90-dB SL. These observations are interpreted by considering the recruitment produced by fatigue and masking noise.

Work experience, job-fulfillment and burnout among VMMC providers in Kenya, South Africa, Tanzania and Zimbabwe.

PubMed

Perry, Linnea; Rech, Dino; Mavhu, Webster; Frade, Sasha; Machaku, Michael D; Onyango, Mathews; Aduda, Dickens S Omondi; Fimbo, Bennett; Cherutich, Peter; Castor, Delivette; Njeuhmeli, Emmanuel; Bertrand, Jane T

2014-01-01

Human resource capacity is vital to the scale-up of voluntary medical male circumcision (VMMC) services. VMMC providers are at risk of "burnout" from performing a single task repeatedly in a high volume work environment that produces long work hours and intense work effort. The Systematic Monitoring of the Voluntary Medical Male Circumcision Scale-up (SYMMACS) surveyed VMMC providers in Kenya, South Africa, Tanzania, and Zimbabwe in 2011 (n = 357) and 2012 (n = 591). Providers self-reported on their training, work experience, levels of job-fulfillment and work fatigue/burnout. Data analysis included a descriptive analysis of VMMC provider characteristics, and both bivariate and multivariate analyses of factors associated with provider work fatigue/burnout. In 2012, Kenyan providers had worked in VMMC for a median of 31 months compared to South Africa (10 months), Tanzania (15 months), and Zimbabwe (11 months). More than three-quarters (78 - 99%) of providers in all countries in 2012 reported that VMMC is a personally fulfilling job. However, 67% of Kenyan providers reported starting to experience work fatigue/burnout compared to South Africa (33%), Zimbabwe (17%), and Tanzania (15%). Despite the high level of work fatigue/burnout in Kenya, none of the measured factors (i.e., gender, age, full-time versus part-time status, length of service, number of operations performed, or cadre) were significantly associated with work fatigue/burnout in 2011. In 2012, logistic regression found increases in age (p<.05) and number of months working in VMMC (p<.01) were associated with an increased likelihood of experiencing work fatigue/burnout, while higher career total VMMCs decreased the likelihood of experiencing burnout. Given cross-country differences, further elucidation of cultural and other contextual factors that may influence provider burnout is required. Continuing to emphasize the contribution that providers make in the fight against HIV/AIDS is important.

Work Experience, Job-Fulfillment and Burnout among VMMC Providers in Kenya, South Africa, Tanzania and Zimbabwe

PubMed Central

Perry, Linnea; Rech, Dino; Mavhu, Webster; Frade, Sasha; Machaku, Michael D.; Onyango, Mathews; Aduda, Dickens S. Omondi.; Fimbo, Bennett; Cherutich, Peter; Castor, Delivette; Njeuhmeli, Emmanuel; Bertrand, Jane T.

2014-01-01

Background Human resource capacity is vital to the scale-up of voluntary medical male circumcision (VMMC) services. VMMC providers are at risk of “burnout” from performing a single task repeatedly in a high volume work environment that produces long work hours and intense work effort. Methods and findings The Systematic Monitoring of the Voluntary Medical Male Circumcision Scale-up (SYMMACS) surveyed VMMC providers in Kenya, South Africa, Tanzania, and Zimbabwe in 2011 (n = 357) and 2012 (n = 591). Providers self-reported on their training, work experience, levels of job-fulfillment and work fatigue/burnout. Data analysis included a descriptive analysis of VMMC provider characteristics, and both bivariate and multivariate analyses of factors associated with provider work fatigue/burnout. In 2012, Kenyan providers had worked in VMMC for a median of 31 months compared to South Africa (10 months), Tanzania (15 months), and Zimbabwe (11 months). More than three-quarters (78 – 99%) of providers in all countries in 2012 reported that VMMC is a personally fulfilling job. However, 67% of Kenyan providers reported starting to experience work fatigue/burnout compared to South Africa (33%), Zimbabwe (17%), and Tanzania (15%). Despite the high level of work fatigue/burnout in Kenya, none of the measured factors (i.e., gender, age, full-time versus part-time status, length of service, number of operations performed, or cadre) were significantly associated with work fatigue/burnout in 2011. In 2012, logistic regression found increases in age (p<.05) and number of months working in VMMC (p<.01) were associated with an increased likelihood of experiencing work fatigue/burnout, while higher career total VMMCs decreased the likelihood of experiencing burnout. Conclusion Given cross-country differences, further elucidation of cultural and other contextual factors that may influence provider burnout is required. Continuing to emphasize the contribution that providers make in the fight against HIV/AIDS is important. PMID:24802260

Making the most out of life: Exploring the contribution of attention restorative theory in developing a non-pharmacological intervention for fatigue.

PubMed

Kirshbaum, Marilynne N; Donbavand, Joanne

2014-12-01

This study investigates an approach based on Kaplan's Attention Restorative Theory (ART) to develop a non-pharmacological intervention to help individuals manage the distressing effects of illness related fatigue. The study aims to: identify activities perceived as being enjoyable by individuals who have moderate to severe fatigue related to advanced illness; determine the core attributes of potentially beneficially interventions; analyse reported 'enjoyable' experiences within the ART framework by mapping emergent themes to attributes of attention restoration; and develop the prototype for a self-management intervention tool. A purposive sample of 25 individuals who experienced moderate to severe fatigue was selected from the local hospice and community. Focused semi-structured interviews probed the questions: What do you enjoying doing? What is it about the activity that you particularly enjoy? Framework analysis was used to manage responses. Seventy-five 'enjoyable experiences' were identified, including artistic pursuits, voluntary work, socialising and learning. These activities were organised into four conceptual themes: Belonging, Expansive, Nurturing and Purposeful. When mapped against attributes of restorative activities specified in ART, there was some congruence and variation. It was clear that the participants expressed a great need to be safe and in a nurturing environment. Some participants placed a high value in and received great joy from contributing to the community; this was not noted in previous ART literature. This study has extended Kaplan's insightful work on restorative behaviours by revealing the value that purposeful, engaging and safe activities hold for people who live with fatigue. ART has inspired the research team to develop a self-management intervention tool to guide health care practitioners in promoting a non-pharmacological approach to manage fatigue through exploring, discovering and promoting experiences which engage, excite, nurture and challenge the person. Further research is needed to integrate this approach into clinical practice.

Fatigue in an adult attention deficit hyperactivity disorder population: A trans-diagnostic approach.

PubMed

Rogers, Denise C; Dittner, Antonia J; Rimes, Katharine A; Chalder, Trudie

2017-03-01

Trans-diagnostic approaches suggest that key cognitive and behavioural processes maintain symptoms across a wide range of mental health disorders. Fatigue is a common clinical feature of attention deficit hyperactivity disorder (ADHD) in adulthood; however, empirical data supporting its prevalence are lacking. This study aimed to collate outcomes from outpatient services to (1) investigate the prevalence of fatigue in adults with ADHD, (2) examine symptoms of ADHD in adults with chronic fatigue syndrome (CFS), and (3) consider secondary clinical characteristics common to both disorder groups. Measures of self-reported fatigue were compared across groups of adults with ADHD (N = 243), CFS (N = 86), and healthy controls (HC) (N = 211) using a between-subjects cross-sectional design. Groups were also compared on secondary clinical measures of functional impairment, mood, anxiety, sleep, self-efficacy, and their beliefs about the acceptability of expressing emotions. The ADHD group were significantly more fatigued than HC with 62% meeting criteria for fatigue caseness. ADHD symptoms were significantly greater in the CFS group than in HC. ADHD and CFS groups did not differ significantly on measures of functional impairment, mood, and self-efficacy. No significant differences were detected on measures of anxiety when items relating to physical restlessness were removed from the analysis. Adults with ADHD experience greater fatigue than HC. Adults with CFS and ADHD share many trans-diagnostic clinical characteristics, including difficulties with low mood, anxiety, and reduced self-efficacy, which impact upon their overall functioning. Further research is required to investigate extraneous factors mediating fatigue severity in these clinical groups. Fatigue is a common clinical feature of attention deficit hyperactivity disorder (ADHD) in adulthood. Evidence-based interventions for chronic fatigue syndrome could be adapted to address fatigue in ADHD in adults. © 2016 The British Psychological Society.

Determination of the minimal clinically important difference for seven measures of fatigue in Swedish patients with systemic lupus erythematosus.

PubMed

Pettersson, S; Lundberg, I E; Liang, M H; Pouchot, J; Henriksson, E Welin

2015-05-01

To estimate the minimal clinically important difference (MCID) in seven self-administered measures assessing fatigue in Swedish patients with systemic lupus erythematosus (SLE). The participants (n = 51, women 98%, age 52.8 ± 12.1 years, disease duration 18.7 ± 13.6 years) met in groups of six to nine persons. After completing seven fatigue questionnaires [the Fatigue Severity Scale (FSS); the Multidimensional Assessment of Fatigue (MAF) scale; the 20-item Multidimensional Fatigue Inventory (MFI); the Chalder Fatigue Scale (CFS); the Short Form-36 Vitality subscale (VT); the Functional Assessment of Chronic Illness Therapy - Fatigue (FACIT-F) scale; and the Numeric Rating Scale (NRS)], each respondent had a minimum of five face-to-face discussions, followed by an individual comparative assessment of their own level of fatigue (seven-grade scale). This method resulted in 260 contrasting assessments; MCIDs were first calculated using the paired differences and then established by a regression approach. Patients were asked to comment on their experience with the questionnaires and whether they captured their fatigue adequately. The paired approach (using 'little more fatigue' as an anchor for MCID during the face-to-face comparative assessments) provided estimates of 4.6-17.0; the regression approach provided estimates of 4.3-10.8. Estimates using the regression approach were consistently lower than those using the paired model. The MCID estimates were least favourable and fewer respondents supported the use of the NRS compared to the other self-reported questionnaires. All seven instruments detect MCIDs for fatigue in Swedish patients with SLE. However, the single-question measure was not supported by the MCID estimates or by comments from the respondents.

Fatigue Life Prediction of Metallic Materials Based on the Combined Nonlinear Ultrasonic Parameter

NASA Astrophysics Data System (ADS)

Zhang, Yuhua; Li, Xinxin; Wu, Zhenyong; Huang, Zhenfeng; Mao, Hanling

2017-08-01

The fatigue life prediction of metallic materials is always a tough problem that needs to be solved in the mechanical engineering field because it is very important for the secure service of mechanical components. In this paper, a combined nonlinear ultrasonic parameter based on the collinear wave mixing technique is applied for fatigue life prediction of a metallic material. Sweep experiments are first conducted to explore the influence of driving frequency on the interaction of two driving signals and the fatigue damage of specimens, and the amplitudes of sidebands at the difference frequency and sum frequency are tracked when the driving frequency changes. Then, collinear wave mixing tests are carried out on a pair of cylindrically notched specimens with different fatigue damage to explore the relationship between the fatigue damage and the relative nonlinear parameters. The experimental results show when the fatigue degree is below 65% the relative nonlinear parameter increases quickly, and the growth rate is approximately 130%. If the fatigue degree is above 65%, the increase in the relative nonlinear parameter is slow, which has a close relationship with the microstructure evolution of specimens. A combined nonlinear ultrasonic parameter is proposed to highlight the relationship of the relative nonlinear parameter and fatigue degree of specimens; the fatigue life prediction model is built based on the relationship, and the prediction error is below 3%, which is below the prediction error based on the relative nonlinear parameters at the difference and sum frequencies. Therefore, the combined nonlinear ultrasonic parameter using the collinear wave mixing method can effectively estimate the fatigue degree of specimens, which provides a fast and convenient method for fatigue life prediction.

Does Dysphoria Lead to Divergent Mental Fatigue Effects on a Cognitive Task?

PubMed

Hopstaken, Jesper F; Wanmaker, Sabine; van der Linden, Dimitri; Bakker, Arnold B

2015-01-01

Tiredness, low energy, and listlessness are common symptoms to be associated with depression. The question remains to what extent these symptoms influence the effects of fatigue on sustained performance tasks, such as impaired task engagement and performance. Based on earlier findings, it was hypothesized that dysphoric (i.e., mildly depressed) individuals, compared to healthy controls, would display earlier fatigue onset and more severe fatigue effects on task engagement and performance during a cognitive task. Sixty-one dysphoric and twenty-one non-dysphoric control participants were compared during one hour of continuous performance on a 2-back task. During the task subjective fatigue, subjective engagement, objective task performance, baseline pupil diameter and stimulus-evoked pupil dilation were measured. While we found that the dysphoric group reported relatively higher subjective fatigue than the healthy control group at the start of the experiment, we did not find any other divergent fatigue effects during the experimental task. One explanation for the absence of divergent effect is that dysphoria may not have such a profound impact on available cognitive resources, like attention, as initially thought. Based on the results of the present study, we conclude that dysphoria is not necessarily an increased risk factor for impaired sustained performance on cognitive tasks that may induce mental fatigue.

Occupational therapists' experience of workplace fatigue: Issues and action.

PubMed

Brown, Cary A; Schell, Jennifer; Pashniak, Lisa M

2017-01-01

Occupational therapists (OTs) work in all areas of health and wellbeing. The work is physically and psychologically demanding, but OTs are often not diligent about recognizing and attending to the workplace health and safety issue of fatigue in their own work settings. The purpose of this paper is to determine current issues and the evidence-base as presented in the literature so as to develop awareness and best practice interventions for fatigue reduction and management in occupational therapists' workplace. A comprehensive search strategy was carried out by the medical librarian on the study team and themes were extracted from the relevant literature by the study team. The literature revealed little research directly addressing occupational therapy workplace fatigue and we expanded our review of the evidence-base across all healthcare workers to identify publications of particular relevance to occupational therapists. This background paper is an important first step to raising awareness among OTs, guide key stakeholders regarding contributing factors to, and consequences of, OTs' workplace fatigue, and set research direction. Knowing which factors influencing workplace fatigue are shared across healthcare professionals and which are unique to OTs can also help organizations develop more tailored workplace fatigue risk reduction programs. This review concludes with a list of existing guidelines and tools for developing workplace fatigue risk assessment and management programs relevant to occupational therapists.

Descriptive study of burnout, compassion fatigue and compassion satisfaction in undergraduate nursing students at a tertiary education institution in KwaZulu-Natal.

PubMed

Mathias, Christina T; Wentzel, Dorien L

2017-09-22

Studies have investigated burnout and compassion fatigue among nurses and effects in the nursing profession. However, there are limited investigations of burnout and compassion fatigue among undergraduate nursing students in South Africa, as nursing students may experience distressful situations during their nursing education course, which may have an impact during their training and in their profession as they graduate. The purpose of this descriptive study was to describe compassion satisfaction, compassion fatigue and burnout among undergraduate nursing students at a tertiary nursing institution. A quantitative descriptive study was conducted to describe compassion satisfaction, compassion fatigue and burnout among undergraduate nursing students at a tertiary nursing institution in KwaZulu-Natal. Convenience sampling was used. Sixty-seven undergraduate students (26 third-year and 41 fourth-year nursing students) took the self-test Professional Quality of Life Scale (ProQOL). The study results indicate that undergraduate students experienced average levels of compassion fatigue, burnout and compassion satisfaction. As shown in the study, some of the undergraduate students are experiencing compassion fatigue and burnout, associated with relieving suffering of others. Therefore, knowledge of compassion fatigue and burnout and the coping strategies should be part of nursing training.

Nondestructive Evaluation of Metal Fatigue Using Nonlinear Acoustics

NASA Technical Reports Server (NTRS)

Cantrell, John H., Jr.

2008-01-01

Safe-life and damage-tolerant design philosophies of high performance structures have driven the development of various methods to evaluate nondestructively the accumulation of damage in such structures resulting from cyclic loading. Although many techniques have proven useful, none has been able to provide an unambiguous, quantitative assessment of damage accumulation at each stage of fatigue from the virgin state to fracture. A method based on nonlinear acoustics is shown to provide such a means to assess the state of metal fatigue. The salient features of an analytical model are presented of the microelastic-plastic nonlinearities resulting from the interaction of an acoustic wave with fatigue-generated dislocation substructures and cracks that predictably evolve during the metal fatigue process. The interaction is quantified by the material (acoustic) nonlinearity parameter extracted from acoustic harmonic generation measurements. The parameters typically increase monotonically by several hundred percent over the fatigue life of the metal, thus providing a unique measure of the state of fatigue. Application of the model to aluminum alloy 2024-T4, 410Cb stainless steel, and IN100 nickel-base superalloy specimens fatigued using different loading conditions yields good agreement between theory and experiment. Application of the model and measurement technique to the on-site inspection of steam turbine blades is discussed.

The effects of pitting on fatigue crack nucleation in 7075-T6 aluminum alloy

NASA Technical Reports Server (NTRS)

Ma, LI; Hoeppner, David W.

1994-01-01

A high-strength aluminum alloy, 7075-T6, was studied to quantitatively evaluate chemical pitting effects of its corrosion fatigue life. The study focused on pit nucleation, pit growth, and fatigue crack nucleation. Pitting corrosion fatigue experiments were conducted in 3.5 percent NaCl aqueous solution under constant amplitude sinusoidal loading at two frequencies, 5 and 20 Hz. Smooth and unnotched specimens were used in this investigation. A video recording system was developed to allow in situ observation of the surface changes of the specimens during testing. The results indicated that pitting corrosion considerably reduces the fatigue strength by accelerating fatigue crack nucleation. A metallographic examination was conducted on the specimens to evaluate the nature of corrosion pits. First, the actual shapes of the corrosion pits were evaluated by cross-sectioning the pits. Secondly, the relation between corrosion pits and microstructure was also investigated. Finally, the possibility of another corrosion mechanism that might be involved in pitting was explored in this investigation. The fractography of the tested specimens showed that corner corrosion pits were responsible for fatigue crack nucleation in the material due to the associated stress concentration. The pits exhibited variance of morphology. Fatigue life for the experimental conditions appeared to be strongly dependent on pitting kinetics and the crack nucleation stage.

Impact of Fatigue in Rheumatic Diseases in the Work Environment: A Qualitative Study.

PubMed

Connolly, Deirdre; Fitzpatrick, Clodagh; O'Toole, Lynn; Doran, Michele; O'Shea, Finbar

2015-10-28

Fatigue is a symptom of arthritis that causes difficulty at work. An improved understanding of this symptom could assist its management in the work environment. The aim of this study was to explore people with rheumatic diseases' experiences of fatigue in work. A qualitative descriptive design was used with semi-structured interviews and a constant comparative method of data analysis. There were 18 participants, the majority of them female with Rheumatoid Arthritis (RA) and working full-time. Three themes were identified: "Impact of fatigue on work performance" with cognition, mood and physical abilities being the main difficulties reported. In the second theme "Disclosure at Work" participants discussed disclosing their disease to employers but reported a lack of understanding of fatigue from colleagues. The final theme "work-based fatigue management strategies" included cognitive strategies and energy management techniques, which were mainly self-taught. In this study, fatigue was reported to impact on many areas of work performance with limited understanding from colleagues and employers. Interventions from health professionals to assist with development of work-related self-management skills are required to assist with symptom management in the work place. Such interventions should include education to employers and colleagues on the nature of fatigue in Rheumatic diseases.

Impact of Fatigue in Rheumatic Diseases in the Work Environment: A Qualitative Study

PubMed Central

Connolly, Deirdre; Fitzpatrick, Clodagh; O’Toole, Lynn; Doran, Michele; O’Shea, Finbar

2015-01-01

Fatigue is a symptom of arthritis that causes difficulty at work. An improved understanding of this symptom could assist its management in the work environment. The aim of this study was to explore people with rheumatic diseases’ experiences of fatigue in work. A qualitative descriptive design was used with semi-structured interviews and a constant comparative method of data analysis. There were 18 participants, the majority of them female with Rheumatoid Arthritis (RA) and working full-time. Three themes were identified: “Impact of fatigue on work performance” with cognition, mood and physical abilities being the main difficulties reported. In the second theme “Disclosure at Work” participants discussed disclosing their disease to employers but reported a lack of understanding of fatigue from colleagues. The final theme “work-based fatigue management strategies” included cognitive strategies and energy management techniques, which were mainly self-taught. In this study, fatigue was reported to impact on many areas of work performance with limited understanding from colleagues and employers. Interventions from health professionals to assist with development of work-related self-management skills are required to assist with symptom management in the work place. Such interventions should include education to employers and colleagues on the nature of fatigue in Rheumatic diseases. PMID:26516896

Subjective and objective evaluation of visual fatigue on viewing 3D display continuously

NASA Astrophysics Data System (ADS)

Wang, Danli; Xie, Yaohua; Yang, Xinpan; Lu, Yang; Guo, Anxiang

2015-03-01

In recent years, three-dimensional (3D) displays become more and more popular in many fields. Although they can provide better viewing experience, they cause extra problems, e.g., visual fatigue. Subjective or objective methods are usually used in discrete viewing processes to evaluate visual fatigue. However, little research combines subjective indicators and objective ones in an entirely continuous viewing process. In this paper, we propose a method to evaluate real-time visual fatigue both subjectively and objectively. Subjects watch stereo contents on a polarized 3D display continuously. Visual Reaction Time (VRT), Critical Flicker Frequency (CFF), Punctum Maximum Accommodation (PMA) and subjective scores of visual fatigue are collected before and after viewing. During the viewing process, the subjects rate the visual fatigue whenever it changes, without breaking the viewing process. At the same time, the blink frequency (BF) and percentage of eye closure (PERCLOS) of each subject is recorded for comparison to a previous research. The results show that the subjective visual fatigue and PERCLOS increase with time and they are greater in a continuous process than a discrete one. The BF increased with time during the continuous viewing process. Besides, the visual fatigue also induced significant changes of VRT, CFF and PMA.

Prevalence and Correlates of Fatigue in CKD and ESRD: Are Sleep Disorders a Key to Understanding Fatigue?

PubMed Central

Jhamb, Manisha; Liang, Kelly; Yabes, Jonathan; Steel, Jennifer L; Dew, Mary Amanda; Shah, Nirav; Unruh, Mark

2014-01-01

Background Fatigue is an important symptom to patients with advanced CKD. The aim of this study is to examine the prevalence and severity of fatigue among non-dialysis dependent CKD and ESRD patients; examine association of fatigue with subjective and objective sleep quality; identify other modifiable factors associated with fatigue. Methods Cross-sectional survey of 87 non-dialysis dependent CKD (eGFR ≤45 ml/min/1.73 m2) and 86 ESRD patients was done using Functional Assessment of Chronic Illness Therapy – Fatigue (FACIT-F) and SF-36 vitality scale. Higher FACIT-F score denoted less fatigue. Objective sleep was assessed using in-home polysomnography. Predictors of fatigue were determined using linear regression model. Results Mean FACIT-F score among all participants was 34.5±11.0. Mean scores were similar among CKD and ESRD groups (34.25±11.28 versus 34.73±10.86; p=0.73). On univariate analyses, patients with higher levels of fatigue were more likely to have cardiovascular disease, benzodiazepine use, depressive symptoms, slightly lower hemoglobin and serum albumin levels. There was no significant association between severity of sleep apnea and level of fatigue (Apnea Hypopnea Index 20.1±27.6 versus 20.3±22.0; p=0.69). Presence of cardiovascular disease, low serum albumin, depressive symptoms, poor subjective sleep quality, excessive daytime sleepiness and restless legs syndrome (RLS) were independently associated with greater fatigue in multivariable regression models. The FACIT-F score correlated closely with the SF-36 vitality score (r =0.81, p<0.0001). Conclusions Patients with advanced CKD and ESRD experience profound fatigue. Depressive symptoms, RLS, excessive daytime sleepiness, and low albumin levels may provide targets for interventions to improve fatigue in patients with advanced CKD. PMID:24335380

Fatigue and quality of life in women treated for various types of gynaecological cancers: a cross-sectional study

PubMed Central

Sekse, Ragnhild Johanne Tveit; Hufthammer, Karl Ove; Vika, Margrethe Elin

2015-01-01

Aims and objectives To examine the prevalence of cancer-related fatigue in women treated for various types of gynaecological cancers and, for these cancers, to assess fatigue in relation to distress, health-related quality of life, demography and treatment characteristics. Background Advances in treatment of cancer have improved the likelihood of survival. Consequently, there are a growing number of patients who become survivors after cancer and who face side effects even years after treatment. One of the most frequently reported side effects across all types and stages of the disease is cancer-related fatigue. Design A descriptive cross-sectional study. Methods One hundred and twenty women treated for gynaecological cancers who were participants in an intervention study were included. Fatigue, psychological distress, health-related QoL and demographics were assessed by questionnaires. Disease and treatment characteristics were extracted from medical records. Results Cancer-related fatigue was reported in 53% of the women treated for gynaecological cancers, with a higher proportion in the group of cervical cancer, followed by ovarian cancer. Younger participants reported fatigue more frequently than older participants. When adjusting for age, the type of cancer a woman experiences was shown to have little impact on her risk of experiencing fatigue. The participants with fatigue reported higher levels of anxiety and depression than participants without fatigue. There was a relationship between fatigue and quality of life as measured by SF-36 domains. Conclusion The findings underscore the importance of screening for fatigue, patient education and symptom management. This should be included in a standard procedure during treatment and follow-up. Both somatic and psychological aspects of fatigue should be emphasised. Relevance to clinical practice The findings imply the need for health personnel to have focus on fatigue during the entire cancer trajectory of women after gynaecological cancers, as well as the need for screening, information, guidance and symptom management. PMID:25040957

Reliability Quantification of the Flexure: A Critical Stirling Convertor Component

NASA Technical Reports Server (NTRS)

Shah, Ashwin R.; Korovaichuk, Igor; Zampino, Edward J.

2004-01-01

Uncertainties in the manufacturing, fabrication process, material behavior, loads, and boundary conditions results in the variation of the stresses and strains induced in the flexures and its fatigue life. Past experience and the test data at material coupon levels revealed a significant amount of scatter of the fatigue life. Owing to these facts, the design of the flexure, using conventional approaches based on safety factor or traditional reliability based on similar equipment considerations does not provide a direct measure of reliability. Additionally, it may not be feasible to run actual long term fatigue tests due to cost and time constraints. Therefore it is difficult to ascertain material fatigue strength limit. The objective of the paper is to present a methodology and quantified results of numerical simulation for the reliability of flexures used in the Stirling convertor for their structural performance. The proposed approach is based on application of finite element analysis method in combination with the random fatigue limit model, which includes uncertainties in material fatigue life. Additionally, sensitivity of fatigue life reliability to the design variables is quantified and its use to develop guidelines to improve design, manufacturing, quality control and inspection design process is described.

An Investigation on the Wear Resistance and Fatigue Behaviour of Ti-6Al-4V Notched Members Coated with Hydroxyapatite Coatings

PubMed Central

Oskouei, Reza H; Fallahnezhad, Khosro; Kuppusami, Sushmitha

2016-01-01

In this study, surface properties of Ti-6Al-4V alloy coated with hydroxyapatite coatings were investigated. Wear resistance and fatigue behaviour of samples with coating thicknesses of 10 and 50 µm as well as uncoated samples were examined. Wear experiments demonstrated that the friction factor of the uncoated titanium decreased from 0.31 to 0.06, through a fluctuating trend, after 50 cycles of wear tests. However, the friction factor of both the coated samples (10 and 50 µm) gradually decreased from 0.20 to 0.12 after 50 cycles. At the end of the 50th cycle, the penetration depth of the 10 and 50 µm coated samples were 7.69 and 6.06 µm, respectively. Fatigue tests showed that hydroxyapatite coatings could improve fatigue life of a notched Ti-6Al-4V member in both low and high cycle fatigue zones. It was understood, from fractography of the fracture surfaces, that the fatigue zone of the uncoated specimens was generally smaller in comparison with that of the coated specimens. No significant difference was observed between the fatigue life of coated specimens with 10 and 50 µm thicknesses. PMID:28787911

Shed a light in fatigue detection with near-infrared spectroscopy during long-lasting driving

NASA Astrophysics Data System (ADS)

Gao, Yuan; Pan, Boan; Li, Kai; Li, Ting

2016-03-01

Fatigue driving is one of the leading roles to induce traffic accident and injury, which urgently desires a novel technique to monitor the fatigue level at driving. Functional near infrared spectroscopy (fNIRS) is capable of noninvasive monitoring brain-activities-related hemodynamic responses. Here, we developed a fINRS imager and setup a classic psychological experiment to trigger visual divided attention which varied responding to driving fatigue, and attempted to record the drive-fatigue-level correlated hemodynamic response in the prefrontal cortex. 7 volunteers were recruited to take 7 hours driving and the experimental test was repeated every 1 hour and 8 times in total. The hemodynamic response were extracted and graphed with pseudo image. The analysis on the relationship between the fNIRS-measured hemodynamic response and fatigue level finally displayed that the oxyhemoglobin concentration in one channel of left prefrontal lobe increased with driving duration in significant correlation. And the spatial pattern of hemodynamic response in the prefrontal lobe varied with driving duration as well. The findings indicated the potential of fNIRSmeasured hemodynamic index in some sensitive spot of prefrontal lobe as a driving fatigue indicator and the promising use of fNIRS in traffic safety field.

A Study on Fretting Behavior in Room Temperature for Inconel Alloy 690

NASA Astrophysics Data System (ADS)

Kwon, Jae Do; Chai, Young Suck; Bae, Yong Tak; Choi, Sung Jong

The initial crack under fretting condition occurs at lower stress amplitude and lower cycles of cyclic loading than that under plain fatigue condition. The fretting damage, for example, can be observed in fossil and nuclear power plant, aircraft, automobile and petroleum chemical plants etc. INCONEL alloy 690 is a high-chromium nickel alloy having excellent resistance to many corrosive aqueous media and high-temperature atmospheres. This alloy is used extensively in the industries of nuclear power, chemicals, heat-treatment and electronics. In this paper, the effect of fretting damage on fatigue behavior for INCONEL alloy 690 was studied. Also, various kinds of tests on mechanical properties such as hardness, tension and plain fatigue tests are performed. Fretting fatigue tests were carried out with flat-flat contact configuration using a bridge type contact pad and plate type specimen. Through these experiments, it is found that the fretting fatigue strength decreased about 43% compared to the plain fatigue strength. In fretting fatigue, the wear debris is observed on the contact surface, and the oblique micro-cracks are initiated at an earlier stage. These results can be used as the basic data in a structural integrity evaluation of heat and corrosion resistant alloy considering fretting damages.

Physical fatigue increases neural activation during eyes-closed state: a magnetoencephalography study.

PubMed

Tanaka, Masaaki; Ishii, Akira; Watanabe, Yasuyoshi

2015-11-05

Fatigue, defined as difficulty initiating or sustaining voluntary activities, can be classified as physical or mental. In this study, we use magnetoencephalography (MEG) to quantify the effect of physical fatigue on neural activity under the condition of simulated physical load. Thirteen healthy right-handed male volunteers participated in this study. The experiment consisted of one fatigue-inducing physical task session performed between two MEG sessions. During the 10-min physical task session, participants performed maximum-effort handgrips with the left hand lasting 1 s every 4 s; during MEG sessions, 3-min recordings were made during the eyes-closed state. MEG data were analyzed using narrow-band adaptive spatial filtering methods. Alpha-frequency band (8-13 Hz) power in the left postcentral gyrus, precentral gyrus, and middle frontal gyrus (Brodmann's areas 1, 2, 3, 4, 6, and 46) were decreased after performing the physical fatigue-inducing task. These results show that performing the physical fatigue-inducing task caused activation of the left sensorimotor and prefrontal areas, manifested as decreased alpha-frequency band power in these brain areas. Our results increase understanding of the neural mechanisms of physical fatigue.

Compassion Fatigue, Burnout, and Compassion Satisfaction Among Oncology Nurses in the United States and Canada.

PubMed

Wu, Stacey; Singh-Carlson, Savitri; Odell, Annie; Reynolds, Grace; Su, Yuhua

2016-07-01

To examine the experiences of compassion fatigue, burnout, and compassion satisfaction among oncology nurses in the United States and Canada. 
. Quantitative, descriptive, nonexperimental.
. Online survey with members from the Canadian Association of Nursing Oncology and the Oncology Nursing Society.
. 486 American and 63 Canadian practicing oncology nurses.
. The Professional Quality of Life (ProQOL) scale, version 5, and modified Abendroth Demographic Questionnaire were administered through FluidSurveys™, an online data collection instrument. Chi-square tests of independence were used to investigate associations between demographic characteristics, health, personal stressors, and work-related characteristics to experiences of compassion fatigue, burnout, and compassion satisfaction. Compassion fatigue was measured using the subscales of secondary traumatic stress and burnout. 
. Compassion fatigue, burnout, and compassion satisfaction.
. Demographic characteristics were similar in American and Canadian participants, and both cohorts reported comparable levels of compassion fatigue, burnout, and compassion satisfaction. Perception of team cohesiveness within the workplace environment was found to be significant for both groups, as indicated by significant relationships in all three subscales of secondary traumatic stress, burnout, and compassion satisfaction in the ProQOL.
. Healthy and supportive work environments are imperative to nurses' health, well-being, and satisfaction. Improvements in the workplace can help prevent negative sequelae, as well as improve health outcomes for patients and nurses, decrease nurse turnover, and reduce healthcare expenditures. 
. Findings can be used to implement institutional changes, such as creating policies and guidelines for the development of preventive interventions and psychosocial support for nurses.

Measuring visual discomfort associated with 3D displays

NASA Astrophysics Data System (ADS)

Lambooij, M.; Fortuin, M.; Ijsselsteijn, W. A.; Heynderickx, I.

2009-02-01

Some people report visual discomfort when watching 3D displays. For both the objective measurement of visual fatigue and the subjective measurement of visual discomfort, we would like to arrive at general indicators that are easy to apply in perception experiments. Previous research yielded contradictory results concerning such indicators. We hypothesize two potential causes for this: 1) not all clinical tests are equally appropriate to evaluate the effect of stereoscopic viewing on visual fatigue, and 2) there is a natural variation in susceptibility to visual fatigue amongst people with normal vision. To verify these hypotheses, we designed an experiment, consisting of two parts. Firstly, an optometric screening was used to differentiate participants in susceptibility to visual fatigue. Secondly, in a 2×2 within-subjects design (2D vs 3D and two-view vs nine-view display), a questionnaire and eight optometric tests (i.e. binocular acuity, fixation disparity with and without fusion lock, heterophoria, convergent and divergent fusion, vergence facility and accommodation response) were administered before and immediately after a reading task. Results revealed that participants found to be more susceptible to visual fatigue during screening showed a clinically meaningful increase in fusion amplitude after having viewed 3D stimuli. Two questionnaire items (i.e., pain and irritation) were significantly affected by the participants' susceptibility, while two other items (i.e., double vision and sharpness) were scored differently between 2D and 3D for all participants. Our results suggest that a combination of fusion range measurements and self-report is appropriate for evaluating visual fatigue related to 3D displays.