In Vitro Evaluation of Eslicarbazepine Delivery via Enteral Feeding Tubes.

PubMed

Reindel, Kristin; Zhao, Fang; Hughes, Susan; Dave, Vivek S

2017-12-01

Purpose: The feasibility of preparing an eslicarbazepine acetate suspension using Aptiom tablets for administration via enteral feeding tubes was evaluated. Methods: Eslicarbazepine acetate suspension (40 mg/mL) was prepared using Aptiom tablets after optimizing the tablet crushing methods and the vehicle composition. A stability-indicating high-performance liquid chromatography (HPLC) method was developed to monitor the eslicarbazepine stability in the prepared suspension. Three enteric feeding tubes of various composition and dimensions were evaluated for the delivery of the suspensions. The suspension was evaluated for the physical and chemical stability for 48 hours. Results: The reproducibility and consistency of particle size reduction was found to be best with standard mortar/pestle. The viscosity analysis and physical stability studies showed that ORA-Plus:water (50:50 v/v) was optimal for suspending ability and flowability of suspension through the tubes. The developed HPLC method was found to be stability indicating and suitable for the assay of eslicarbazepine acetate in the prepared suspension. The eslicarbazepine concentrations in separately prepared suspensions were within acceptable range (±3%), indicating accuracy and reproducibility of the procedure. The eslicarbazepine concentrations in suspensions before and after delivery through the enteric feeding tubes were within acceptable range (±4%), indicating absence of any physical/chemical interactions of eslicarbazepine with the tubes and a successful delivery of eslicarbazepine dosage via enteric feeding tubes. The stability study results showed that eslicarbazepine concentration in the suspension remained unchanged when stored at room temperature for 48 hours. Conclusion: The study presents a convenient procedure for the preparation of a stable suspension of eslicarbazepine acetate (40 mg/mL) using Aptiom tablets, for administration via enteral feeding tubes.

40 CFR 63.11627 - What definitions apply to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... feed supplements; prepared animal feeds; specialty animal (e.g., guinea pig, mice, mink) feeds; fish... the purposes of this subpart. Average daily feed production level means the average amount of animal... feed production level is based on the one-year period prior to the compliance date for existing sources...

An In-Port Feeding System for Shipboard Personnel. Volume 1

DTIC Science & Technology

1982-12-01

Tips w/Gravy E-5 Steamed Rice Q-46-3 Lyonnaise Potatoes Q-G-3 Buttered Zucchini Special Pumpkin Pie G-5 Banana Cake G-39-1 Banana Cream Frosting...lasagna) or partially prepared (e.g., dehydrated potatoes , cake mixes, etc.). One of the types of the prepared convenience foods evaluated were...well accepted. Nevertheless, Tray Pack Items receiving mean hedonic ratings below 6.0 were found in all four categories: entrees, vegetables, potatoes

Hypercalcemia caused by iatrogenic hypervitaminosis A.

PubMed

Bhalla, Karan; Ennis, David M; Ennis, Elizabeth D

2005-01-01

Vitamin A toxicity produces protean clinical manifestations involving a wide variety of tissues and systems. Hypercalcemia can occasionally be associated with high vitamin A levels, but is rare. In this report we describe a patient who was receiving a commercially prepared enteral feeding formula for 2 years. He developed asymptomatic hypercalcemia and had serum vitamin A levels several fold above normal. Subsequently, a custom-made enteral feed was used which contained negligible amounts of vitamin A. Several months later, vitamin A levels diminished substantially and serum calcium levels returned to normal.

Sustainability of Recycled ABS and PA6 by Banana Fiber Reinforcement: Thermal, Mechanical and Morphological Properties

NASA Astrophysics Data System (ADS)

Singh, Rupinder; Kumar, Ranvijay; Ranjan, Nishant

2018-01-01

In the present study efforts have been made to prepare functional prototypes with improved thermal, mechanical and morphological properties from polymeric waste for sustainability. The primary recycled acrylonitrile butadiene styrene (ABS) and polyamide 6 (PA6) has been selected as matrix material with bio-degradable and bio-compatible banana fibers (BF) as reinforcement. The blend (in form of feed stock filament wire) of ABS/PA6 and BF was prepared in house by conventional twin screw extrusion (TSE) process. Finally feed stock filament of ABS/PA6 reinforced with BF was put to run on open source fused deposition modelling based three dimensional printer (without any change in hardware/software of the system) for printing of functional prototypes with improved thermal/mechanical/morphological properties. The results are supported by photomicrographs, thermographs and mechanical testing.

From in situ coal to the final coal product: A case study of the Danville Coal Member (Indiana)

USGS Publications Warehouse

Mastalerz, Maria; Padgett, P.L.

1999-01-01

A surface coal mine operation and preparation plant in southwestern Indiana was sampled to examine variations in coal quality and coal petrography parameters for the Danville Coal Member of the Dugger Formation (Pennsylvanian-Desmoinesian, Westphalian D). Representative samples from in situ coal, preparation plant feeds, and a final coal product were collected in order to compare coal quality, coal petrography, trace element concentrations, and ash chemistry of the coal to those of the product. Coal quality parameters of the in situ samples and various feeds, coarse refuse, and final product were variable. The quality of the final coal product was best predicted by the coal quality of the clean coal feed (from the middle portions of the seam). Some trace element contents, especially lead and arsenic, varied between the coal feeds and the product. Lead contents increased in the feeds and product compared to the channel sample of the raw coal, possibly due to contamination in the handling process.A surface coal mine operation and preparation plant in southwestern Indiana was sampled to examine variations in coal quality and coal petrography parameters for the Danville Coal Member of the Dugger Formation (Pennsylvanian-Desmoinesian, Westphalian D). Representative samples from in situ coal, preparation plant feeds, and a final coal product were collected in order to compare coal quality, coal petrography, trace element concentrations, and ash chemistry of the coal to those of the product. Coal quality parameters of the in situ samples and various feeds, coarse refuse, and final product were variable. The quality of the final coal product was best predicted by the coal quality of the clean coal feed (from the middle portions of the seam). Some trace element contents, especially lead and arsenic, varied between the coal feeds and the product. Lead contents increased in the feeds and product compared to the channel sample of the raw coal, possibly due to contamination in the handling process.

Efficiency of organic acid preparations for the elimination of naturally occurring Salmonella in feed material.

PubMed

Axmann, Sonja; Kolar, Veronika; Adler, Andreas; Strnad, Irmengard

2017-11-01

Salmonella can enter animal stocks via feedstuffs, thus posing not only an infection risk for animals, but also threatening to contaminate food of animal origin and finally humans. Salmonella contamination in feedstuffs is still a recurring and serious issue in animal production (especially for the poultry sector), and is regularly detected upon self-monitoring by feed companies (self-checks) and official inspections authorities. Operators within the feed chain in certain cases need to use hygienic condition enhancers, such as organic acids, to improve the quality of feed for animal nutrition, providing additional guarantees for the protection of animal and public health. The present study investigated the efficiencies of five organic acid preparations. The acid products were added to three different feed materials contaminated with Salmonella (contamination occurred by recontamination in the course of the production process) at seven different inclusion rates (1-7%) and analysed after 1, 2, and 7 days' exposure time using culture method (tenfold analysis). A reliable standard was established for defining a successful decontamination under the prevailing test conditions: 10 Salmonella-negative results out of 10 tested samples (0/10: i.e. 0 positive samples and 10 negative samples). The results demonstrated that the tested preparations showed significant differences with regard to the reduction in Salmonella contamination. At an inclusion rate of 7% of the feed materials, two out of five acid preparations showed an insufficient, very small, decontamination effect, whereas two others had a relatively large partial effect. Reliable decontamination was demonstrated only for one acid preparation, however, subject to the use of the highest acid concentration.

'Unfit for human consumption': a study of the contamination of formula milk fed to young children in East Java, Indonesia.

PubMed

Gibson, Sarah; Sahanggamu, Daniel; Fatmaningrum, Dewi; Curtis, Val; White, Sian

2017-10-01

To examine levels of bacterial contamination in formula feeding bottles in Sidoarjo, East Java, and to assess the preparation practices that may have been responsible. A cross-sectional study was conducted among 92 randomly selected households with children under the age of two who were bottle-fed formula. In each household, we carried out video observation of mothers/caregivers preparing bottles, and examined samples of formula for coliform bacteria and Escherichia coli (E. coli). In-depth interviews were conducted with a subsample of 20 mothers. A total of 88% of the formula feeds were contaminated with total coliforms at a level >10 MPN/ml, and 45% contained E. coli. These feeds were defined as 'unfit for human consumption'. In the video observations, none of the mothers complied with all five WHO-recommended measures of hygienic formula feed preparation. Only two mothers washed their hands with soap prior to formula preparation. Most mothers also failed to clean or sterilise the bottle and clean the preparation area. In-depth interviews confirmed that such suboptimal hygiene practices were common. The high levels of contamination found highlight that bottles are an important faecal-oral exposure pathway resulting from poor hygiene practices during bottle preparation. © 2017 John Wiley & Sons Ltd.

LABORATORY EVALUATION OF NONSTICK COATINGS TO REDUCE INK ADHESION TO PRINTING PRESS COMPONENTS

EPA Science Inventory

The report gives results of a project to identify surface coatings or preparations that might reduce and/or eliminate the need for solvent cleaning of ink-feed-system components of printing equipment. The study was designed to provide qualitative, but not quantitative, results. T...

75 FR 4839 - Endangered and Threatened Wildlife and Plants; Permit, St. Lucie County, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

...] Endangered and Threatened Wildlife and Plants; Permit, St. Lucie County, FL AGENCY: Fish and Wildlife Service...-jay) breeding, feeding, and sheltering habitat incidental to lot preparation for the construction of a...)) of Florida scrub-jay breeding, feeding and sheltering habitat incidental to land preparation for...

Design and fabrication of a prototype for an automatic transport system for transferring human and other wastes to an incinerator unit onboard spacecraft, phase A

NASA Technical Reports Server (NTRS)

Labak, L. J.; Remus, G. A.; Mansnerus, R.

1971-01-01

Three transport system concepts were experimentally evaluated for transferring human and nonhuman wastes from a collection site to an incineration unit onboard spacecraft. The operating parameters, merits, and shortcomings of a porous-pneumatic, nozzle-pneumatic, and a mechanical screw-feed system were determined. An analysis of the test data was made and a preliminary design of two prototype systems was prepared.

Feeding Baby: Hmong, Laotian, Vietnamese, Bosnian, Arabic, Somali, Nuer, Russian, Spanish.

ERIC Educational Resources Information Center

Anoka County Community Health and Environmental Services, Coon Rapids, MN.

These three guides provide information in English, Bosnian, Russian, Arabic, Somali, Spanish, Hmong, Laotian, Vietnamese, and Nuer on feeding infants. Topics covered include breastfeeding advantages and techniques, self-care by breastfeeding mothers, bottle feeding techniques, formula preparation, frequency of feeding, beginning solid foods,…

Trajectories of parasympathetic nervous system function before, during, and after feeding in infants with transposition of the great arteries.

PubMed

Harrison, Tondi M

2011-01-01

Compromised parasympathetic response to stressors may underlie feeding difficulties in infants with complex congenital heart defects, but little is known about the temporal pattern of parasympathetic response across phases of feeding. The aim of this study was to describe initial data exploration of trajectories of parasympathetic response to feeding in 15 infants with surgically corrected transposition of the great arteries and to explore the effects of feeding method, feeding skill, and maternal sensitivity on trajectories. In this descriptive, exploratory study, parasympathetic function was measured using high-frequency heart rate variability (HF HRV), feeding skill was measured using the Early Feeding Skills assessment, and maternal sensitivity was measured using the Parent-Child Early Relational Assessment. Data were collected before, during, and after feeding at 2 weeks and 2 months of age. Trajectories of parasympathetic function and relationships with possible contributing factors were examined graphically. Marked between-infant variability in HF HRV across phases of feeding was apparent at both ages, although it was attenuated at 2 months. Four patterns of HF HRV trajectories across phases of feeding were identified and associated with feeding method, feeding skill, and maternal sensitivity. Developmental increases in HF HRV were apparent in most breast-fed, but not bottle-fed, infants. This exploratory data analysis provides critical information in preparation for a larger study in which varying trajectories and potential contributing factors can be modeled in relationship to infant outcomes. Findings support inclusion of feeding method, feeding skill, and maternal sensitivity in modeling parasympathetic function across feeding.

Trajectories of Parasympathetic Nervous System Function before, during, and after Feeding in Infants with Transposition of the Great Arteries

PubMed Central

Harrison, Tondi M.

2011-01-01

Background Compromised parasympathetic response to stressors may underlie feeding difficulties in infants with complex congenital heart defects, but little is known about the temporal pattern of parasympathetic response across phases of feeding. Objectives To describe initial data exploration of trajectories of parasympathetic response to feeding in 15 infants with surgically corrected transposition of the great arteries and to explore effects of feeding method, feeding skill, and maternal sensitivity on trajectories. Method In this descriptive, exploratory study, parasympathetic function was measured using high frequency heart rate variability (HF HRV), feeding skill was measured using the Early Feeding Skills assessment, and maternal sensitivity was measured using the Parent-Child Early Relational Assessment. Data were collected before, during, and after feeding at 2 weeks and 2 months of age. Trajectories of parasympathetic function and relationships with possible contributing factors were examined graphically. Results Marked between-infant variability in HF HRV across phases of feeding was apparent at both ages, although attenuated at 2 months. Four patterns of HF HRV trajectories across phases of feeding were identified and associated with feeding method, feeding skill, and maternal sensitivity. Developmental increases in HF HRV were apparent in most breastfed, but not bottle-fed, infants. Discussion This exploratory data analysis provided critical information in preparation for a larger study in which varying trajectories and potential contributing factors can be modeled in relationship to infant outcomes. Findings support inclusion of feeding method, feeding skill, and maternal sensitivity in modeling parasympathetic function across feeding. PMID:21543958

In vitro screening of selected feed additives, plant essential oils and plant extracts for rumen methane mitigation.

PubMed

Durmic, Zoey; Moate, Peter J; Eckard, Richard; Revell, Dean K; Williams, Richard; Vercoe, Philip E

2014-04-01

Ruminants produce large quantities of methane in their rumen as a by-product of microbial digestion of feed. Antibiotics are added to ruminant feed to reduce wasteful production of methane; however, this practice has some downsides. A search for safer and natural feed additives with anti-methanogenic properties is under way. The objective of this research was to examine selected feed additives, plant essential oils and plant extracts for their anti-methanogenic potential in the rumen using an in vitro batch fermentation system. A significant reduction (P < 0.05) in methane production was observed with nine feed additives (up to 40% reduction), all eight essential oils (up to 75% reduction) and two plant extracts (14% reduction) when compared to their respective controls. Amongst these, only an algal meal high in docosahexaenoic acid, preparations of Nannochloropsis oculata, calcareous marine algae, yeast metabolites and two tannins did not inhibit microbial gas and volatile acid production. The current study identified some potent dietary ingredients or plant compounds that can assist in developing novel feed additives for methane mitigation from the rumen. © 2013 Society of Chemical Industry.

Data quality objectives for TWRS privatization phase 1: confirm tank T is an appropriate feed source for high-level waste feed batch X

DOE Office of Scientific and Technical Information (OSTI.GOV)

NGUYEN, D.M.

1999-06-01

The U.S. Department of Energy-Richland Operations Office (DOE-RL) has initiated Phase 1 of a two-phase privatization strategy for treatment and immobilization of high-level waste (HLW) that is currently managed by the Hanford Tank Waste Remediation System (TWRS) Project. In this strategy, DOE will purchase services from a contractor-owned and operated facility under a fixed price. The Phase 1 TWRS privatization contract requires that the Project Hanford Management Contract (PHMC) contractors, on behalf of DOE, deliver HLW feed in specified quantities and composition to the Privatization Contractor in a timely manner (DOE-RL 1996). Additional requirements are imposed by the interface controlmore » document (ICD) for HLW feed (PHMC 1997). In response to these requirements, the Tank Waste Remediation System Operation and Utilization Plan (TWRSO and UP) (Kirkbride et al. 1997) was prepared by the PHMC. The TWRSO and UP, as updated by the Readiness-To-Proceed (RTP) deliverable (Payne et al. 1998), establishes the baseline operating scenario for the delivery of HLW feed to the Privatization Contractor. The scenario specifies tanks from which HLW will be provided for each feed batch, the operational activities needed to prepare and deliver each batch, and the timing of these activities. The operating scenario was developed based on current knowledge of waste composition and chemistry, waste transfer methods, and operating constraints such as tank farm logistics and availability of tank space. A project master baseline schedule (PMBS) has been developed to implement the operating scenario. The PMBS also includes activities aimed at reducing programmatic risks. One of the activities, ''Confirm Tank TI is Acceptable for Feed,'' was identified to verify the basis used to develop the scenario Additional data on waste quantity, physical and chemical characteristics, and transfer properties will be needed to support this activity. This document describes the data quality objective (DQO) process undertaken to assure appropriate data will be collected to support the activity, ''Confirm Tank T is Acceptable for HLW Feed.'' The DQO process was implemented in accordance with the TWRS DQO process (Banning 1997) with some modifications to accommodate project or tank-specific requirements and constraints.« less

Preparation of a generic monoclonal antibody and development of a highly sensitive indirect competitive ELISA for the detection of phenothiazines in animal feed.

PubMed

Wang, Juan; Wang, Yulian; Pan, Yuanhu; Chen, Dongmei; Liu, Zhenli; Feng, Liang; Peng, Dapeng; Yuan, Zonghui

2017-04-15

In this study, a broadly specific monoclonal antibody was prepared and a sensitive monoclonal-based indirect competitive enzyme linked immunosorbent assay (ic-ELISA) was subsequently developed to determine the phenothiazines in animal feed with a simple sample preparation procedure for the first time. The obtained antibody 3A5 was of the immunoglobulin G1 (IgG1) isotype possessing a kappa light chain, which broadly cross-reacted to nine phenothiazines. The limit of detections of the method ranged from 1.1μgkg -1 to 15.3μgkg -1 in the swine feed and the fish feed. The recoveries of the phenothiazines were in the range of 78.2-116.6%. The coefficient of variations were less than 16.7%. A positive correlation (r>0.9249) between the results of the ic-ELISA and the high-performance liquid chromatography were also observed, which indicated that the developed ic-ELISA is reliable and can be used to monitor phenothiazines in animal feed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Extruded leftover food as animal feed: I. Effect of extruded feed on growth and feed utilization of tilapia (Oreochromis niloticus) in Saudi Arabia.

PubMed

Al-Ruqaie, Ibrahim M

2007-10-01

A Laboratory experiment was used to evaluate the effect of extruded leftover food as an alternate source of fish diet to Nile tilapia (Oreochromis niloticus, 76.75 +/- 1.27 g). Three experimental diets were used. Two extruded leftover food types [with minerals and vitamins (type-1) and without (type-2) were used to prepare two experimental treatments in duplicate as compared to a commercial tilapia diet (ARASCO) as a control. The final body weight and Specific Growth Rate (SGR) were not affected by different types of leftover feed. Whereas, the Feed Conversion Ratio (FCR) and the Protein Efficiency Ratio (PER) were significantly affected by the different feeds. The highest significant values of FCR was shown for fish fed with extruded leftover feed without premix, while Nile tilapia fed with control diet recorded the highest values of PER. The present study showed that the extruded leftover food could be used to prepare least cost diet for Nile tilapia.

40 CFR 63.11621 - What are the standards for new and existing prepared feeds manufacturing facilities?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) of this section. (i) You must use either an industrial vacuum system or manual sweeping to reduce the... section. (i) Manufacturer specifications; (ii) Certification by a professional engineer or responsible... professional engineer or responsible official in accordance with paragraph (e)(1)(ii) of this section, this...

Lake Charles CCS Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leib, Thomas; Cole, Dan

In late September 2014 development of the Lake Charles Clean Energy (LCCE) Plant was abandoned resulting in termination of Lake Charles Carbon Capture and Sequestration (CCS) Project which was a subset the LCCE Plant. As a result, the project was only funded through Phase 2A (Design) and did not enter Phase 2B (Construction) or Phase 2C (Operations). This report was prepared relying on information prepared and provided by engineering companies which were engaged by Leucadia Energy, LLC to prepare or review Front End Engineering and Design (FEED) for the Lake Charles Clean Energy Project, which includes the Carbon Capture andmore » Sequestration (CCS) Project in Lake Charles, Louisiana. The Lake Charles Carbon Capture and Sequestration (CCS) Project was to be a large-scale industrial CCS project intended to demonstrate advanced technologies that capture and sequester carbon dioxide (CO 2) emissions from industrial sources into underground formations. The Scope of work was divided into two discrete sections; 1) Capture and Compression prepared by the Recipient Leucadia Energy, LLC, and 2) Transport and Sequestration prepared by sub-Recipient Denbury Onshore, LLC. Capture and Compression-The Lake Charles CCS Project Final Technical Report describes the systems and equipment that would be necessary to capture CO 2 generated in a large industrial gasification process and sequester the CO 2 into underground formations. The purpose of each system is defined along with a description of its equipment and operation. Criteria for selection of major equipment are provided and ancillary utilities necessary for safe and reliable operation in compliance with environmental regulations are described. Construction considerations are described including a general arrangement of the CCS process units within the overall gasification project. A cost estimate is provided, delineated by system area with cost breakdown showing equipment, piping and materials, construction labor, engineering, and other costs. The CCS Project Final Technical Report is based on a Front End Engineering and Design (FEED) study prepared by SK E&C, completed in [June] 2014. Subsequently, Fluor Enterprises completed a FEED validation study in mid-September 2014. The design analyses indicated that the FEED package was sufficient and as expected. However, Fluor considered the construction risk based on a stick-build approach to be unacceptable, but construction risk would be substantially mitigated through utilization of modular construction where site labor and schedule uncertainty is minimized. Fluor’s estimate of the overall EPC project cost utilizing the revised construction plan was comparable to SKE&C’s value after reflecting Fluor’s assessment of project scope and risk characteristic. Development was halted upon conclusion of Phase 2A FEED and the project was not constructed.Transport and Sequestration – The overall objective of the pipeline project was to construct a pipeline to transport captured CO 2 from the Lake Charles Clean Energy project to the existing Denbury Green Line and then to the Hastings Field in Southeast Texas to demonstrate effective geologic sequestration of captured CO 2 through commercial EOR operations. The overall objective of the MVA portion of the project was to demonstrate effective geologic sequestration of captured CO 2 through commercial Enhanced Oil Recovery (EOR) operations in order to evaluate costs, operational processes and technical performance. The DOE target for the project was to capture and implement a research MVA program to demonstrate the sequestration through EOR of approximately one million tons of CO 2 per year as an integral component of commercial operations.« less

Evaluation of Key Factors Impacting Feeding Safety in the Neonatal Intensive Care Unit: A Systematic Review.

PubMed

Matus, Bethany A; Bridges, Kayla M; Logomarsino, John V

2018-06-21

Individualized feeding care plans and safe handling of milk (human or formula) are critical in promoting growth, immune function, and neurodevelopment in the preterm infant. Feeding errors and disruptions or limitations to feeding processes in the neonatal intensive care unit (NICU) are associated with negative safety events. Feeding errors include contamination of milk and delivery of incorrect or expired milk and may result in adverse gastrointestinal illnesses. The purpose of this review was to evaluate the effect(s) of centralized milk preparation, use of trained technicians, use of bar code-scanning software, and collaboration between registered dietitians and registered nurses on feeding safety in the NICU. A systematic review of the literature was completed, and 12 articles were selected as relevant to search criteria. Study quality was evaluated using the Downs and Black scoring tool. An evaluation of human studies indicated that the use of centralized milk preparation, trained technicians, bar code-scanning software, and possible registered dietitian involvement decreased feeding-associated error in the NICU. A state-of-the-art NICU includes a centralized milk preparation area staffed by trained technicians, care supported by bar code-scanning software, and utilization of a registered dietitian to improve patient safety. These resources will provide nurses more time to focus on nursing-specific neonatal care. Further research is needed to evaluate the impact of factors related to feeding safety in the NICU as well as potential financial benefits of these quality improvement opportunities.

Effects of Feeding of Two Potentially Probiotic Preparations from Lactic Acid Bacteria on the Performance and Faecal Microflora of Broiler Chickens

PubMed Central

Fajardo, Paula; Pastrana, Lorenzo; Méndez, Jesús; Rodríguez, Isabel; Fuciños, Clara; Guerra, Nelson P.

2012-01-01

The aim of this study was to evaluate the potential of two probiotic preparations, containing live lactic acid bacteria (Lactococcus lactis CECT 539 and Lactobacillus casei CECT 4043) and their products of fermentation (organic acids and bacteriocins), as a replacement for antibiotics in stimulating health and growth of broiler chickens. The effects of the supplementation of both preparations (with proven probiotic effect in weaned piglets) and an antibiotic (avilamycin) on body weight gain (BWG), feed intake (FI), feed consumption efficiency (FCE), relative intestinal weight, and intestinal microbiota counts were studied in 1-day posthatch chickens. The experiments were conducted with medium-growth Sasso X44 chickens housed in cages and with nutritional stressed Ross 308 broiler distributed in pens. Consumption of the different diets did not affect significantly the final coliform counts in Sasso X44 chickens. However, counts of lactic acid bacteria and mesophilic microorganisms were higher in the animals receiving the two probiotic preparations (P < 0.05). In the second experiment, although no differences in BWG were observed between treatments, Ross 308 broilers receiving the probiotic Lactobacillus preparation exhibited the lowest FCE values and were considered the most efficient at converting feed into live weight. PMID:22666137

Turning Mealtimes into Learning Opportunities: Integrating Feeding Goals into IEPs

ERIC Educational Resources Information Center

Bruns, Deborah A.; Thompson, Stacy D.

2014-01-01

In this article, the authors use scenarios to describe three students with different individual needs related to feeding, as well as other developmental domains. Feeding difficulties affect students in multiple ways and addressing feeding-related skills on IEPs can include grocery shopping, food preparation, and placing food orders in various…

Hanford High-Level Waste Vitrification Program at the Pacific Northwest National Laboratory: technology development - annotated bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, D.E.

1996-09-01

This report provides a collection of annotated bibliographies for documents prepared under the Hanford High-Level Waste Vitrification (Plant) Program. The bibliographies are for documents from Fiscal Year 1983 through Fiscal Year 1995, and include work conducted at or under the direction of the Pacific Northwest National Laboratory. The bibliographies included focus on the technology developed over the specified time period for vitrifying Hanford pretreated high-level waste. The following subject areas are included: General Documentation; Program Documentation; High-Level Waste Characterization; Glass Formulation and Characterization; Feed Preparation; Radioactive Feed Preparation and Glass Properties Testing; Full-Scale Feed Preparation Testing; Equipment Materials Testing; Meltermore » Performance Assessment and Evaluations; Liquid-Fed Ceramic Melter; Cold Crucible Melter; Stirred Melter; High-Temperature Melter; Melter Off-Gas Treatment; Vitrification Waste Treatment; Process, Product Control and Modeling; Analytical; and Canister Closure, Decontamination, and Handling« less

Resistance of Metallic Screens in a Cryogenic Flow

NASA Astrophysics Data System (ADS)

Fischer, Alexander; Stief, Malte

The propellant behaviour in cryogenic upper stages tanks imposes challenging requirements on the design, especially for future upper stages designed for multiple restarts and long ballistic flight phases. The main challenge is the supply of the propellants to the feed system prior to the engine reignition. During the entire mission the engine requires a gaseous and bubble free liquid supply of propellant at the required thermodynamic conditions. The current research focus is to prepare the initial steps for the maturation of the Propellant Management Device (PMD) technology for cryogenic tank systems. Main components of such a PMD are metallic screens. The metallic screens are used as barrier for any gas bubbles within the fluid stream approaching the space craft engines. The screen characteristics are of fundamental importance for the PMD and feed system design. The paper presents a summary on available experimental screen data with regard to the flow resistance and gives a comparison with theoretical and empirical predictions found in literature. The lack on comparable data with regard to space craft applications and the need on further research with cryogenic flows is demonstrated. The DLR Institute of Space Systems is preparing various cryogenic tests to collect the desired information about the flow properties of such metallic screens. The planned test setup and the foreseen experiments will be presented.

Microbial cell preparation in enteral feeding in critically ill patients: A randomized, double-blind, placebo-controlled clinical trial.

PubMed

Malik, Ausama A; Rajandram, Retnagowri; Tah, Pei Chien; Hakumat-Rai, Vineya-Rai; Chin, Kin-Fah

2016-04-01

Gut failure is a common condition in critically ill patients in the intensive care unit (ICU). Enteral feeding is usually the first line of choice for nutrition support in critically ill patients. However, enteral feeding has its own set of complications such as alterations in gut transit time and composition of gut eco-culture. The primary aim of this study was to investigate the effect of microbial cell preparation on the return of gut function, white blood cell count, C-reactive protein levels, number of days on mechanical ventilation, and length of stay in ICU. A consecutive cohort of 60 patients admitted to the ICU in University Malaya Medical Centre requiring enteral feeding were prospectively randomized to receive either treatment (n = 30) or placebo (n = 30). Patients receiving enteral feeding supplemented with a course of treatment achieved a faster return of gut function and required shorter duration of mechanical ventilation and shorter length of stay in the ICU. However, inflammatory markers did not show any significant change in the pretreatment and posttreatment groups. Overall, it can be concluded that microbial cell preparation enhances gut function and the overall clinical outcome of critically ill patients receiving enteral feeding in the ICU. Copyright © 2015 Elsevier Inc. All rights reserved.

Forebrain networks and the control of feeding by environmental learned cues

PubMed Central

Petrovich, Gorica D.

2013-01-01

The motivation to eat is driven by a complex sum of physiological and non-physiological influences computed by the brain. Physiological signals that inform the brain about energy and nutrient needs are the primary drivers, but environmental signals unrelated to energy balance also control appetite and eating. The two components could act in concert to support the homeostatic regulation of food intake. Often, however, environmental influences rival physiological control and stimulate eating irrespective of satiety, or inhibit eating irrespective of hunger. If persistent, such maladaptive challenges to the physiological system could lead to dysregulated eating and ultimately to eating disorders. Nevertheless, the brain mechanisms underlying environmental contribution in the control of food intake are poorly understood. This paper provides an overview in recent advances in deciphering the critical brain systems using rodent models for environmental control by learned cues. These models use associative learning to compete with the physiological control, and in one preparation food cues stimulate a meal despite satiety, while in another preparation fear cues stop a meal despite hunger. Thus far, four forebrain regions have been identified as part of the essential cue induced feeding circuitry. These are telencephalic areas critical for associative learning, memory encoding, and decision making, the amygdala, hippocampus and prefrontal cortex and the lateral hypothalamus, which functions to integrate feeding, reward, and motivation. This circuitry also engages two orexigenic peptides, ghrelin and orexin. A parallel amygdalar circuitry supports fear cue cessation of feeding. These findings illuminate the brain mechanisms underlying environmental control of food intake and might be also relevant to aspects of human appetite and maladaptive overeating and undereating. PMID:23562305

Bacterial contamination of the lacteal contents of feeding bottles in metropolitan São Paulo, Brazil.

PubMed Central

Morais, T. B.; Morais, M. B.; Sigulem, D. M.

1998-01-01

Reported are the results of a study in São Paulo, Brazil, to evaluate the bacterial contamination of the lacteal contents of feeding bottles prepared in urban households of low (LSE) and high (HSE) socioeconomic groups, involving 100 and 32 mothers of infants, respectively. Samples of the lacteal contents of the feeding bottles were cultured and the medians (25th and 75th percentiles) of the counts (bacteria per ml) were significantly higher in the LSE group: mesophilic bacteria, 555,000 (17,250-4,350,000) in the LSE group and 1615 (20-500,000) in the HSE group; coliforms, 2400 (19-150,000) in the LSE group and 7 (0-7800) in the HSE group. Escherichia coli was isolated from 26% (26/100) of the samples from the LSE group and from 6% (2/32) of those from the HSE group (P = 0.03). In the HSE group, higher coliform counts were associated with foodhandlers other than the mother, lower levels of maternal education, the use of pasteurized milk, and the addition of ingredients other than milk. In the LSE group, feeding bottles prepared using tap water and those prepared for infants aged over 6 months had higher coliform counts. In general, the feeding bottles prepared in the households studied were heavily contaminated, especially in the LSE group. PMID:9648358

Environmental impact evaluation of feeds prepared from food residues using life cycle assessment.

PubMed

Ogino, Akifumi; Hirooka, Hiroyuki; Ikeguchi, Atsuo; Tanaka, Yasuo; Waki, Miyoko; Yokoyama, Hiroshi; Kawashima, Tomoyuki

2007-01-01

There is increasing concern about feeds prepared from food residues (FFR) from an environmental viewpoint; however, various forms of energy are consumed in the production of FFR. Environmental impacts of three scenarios were therefore investigated and compared using life cycle assessment (LCA): production of liquid FFR by sterilization with heat (LQ), production of dehydrated FFR by dehydration (DH), and disposal of food residues by incineration (IC). The functional unit was defined as 1 kg dry matter of produced feed standardized to a fixed energy content. The system boundaries included collection of food residues and production of feed from food residues. In IC, food residues are incinerated as waste, and thus the impacts of production and transportation of commercial concentrate feeds equivalent to the FFR in the other scenarios are included in the analysis. Our results suggested that the average amounts of greenhouse gas (GHG) emissions from LQ, DH, and IC were 268, 1073, and 1066 g of CO(2) equivalent, respectively. The amount of GHG emissions from LQ was remarkably small, indicating that LQ was effective for reducing the environmental impact of animal production. Although the average amount of GHG emissions from DH was nearly equal to that from IC, a large variation of GHG emissions was observed among the DH units. The energy consumption of the three scenarios followed a pattern similar to that of GHG emissions. The water consumption of the FFR-producing units was remarkably smaller than that of IC due to the large volumes of water consumed in forage crop production.

Data quality objectives for TWRS privatization phase 1: confirm tank T is an appropriate feed source for low-activity waste feed batch X

DOE Office of Scientific and Technical Information (OSTI.GOV)

NGUYEN, D.M.

1999-06-01

The US. Department of Energy, Richland Operations Office (DOE-RL) has initiated Phase 1 of a two-phase privatization strategy for treatment and immobilization of low-activity waste (LAW) currently being managed by the Hanford Tank Waste Remediation System (TWRS) Project. In this strategy, DOE will purchase services from a contractor-owned and operated facility under a fixed price. The Phase 1 TWRS privatization contract requires that the Project Hanford Management Contract (PHMC) contractors, on behalf of DOE, deliver LAW feed in specified quantities and composition to the Privatization Contractor in a timely manner (DOE-RL 1996). Additional requirements are imposed by the interface controlmore » document (ICD-19) for LAW feed (PHMC 1997). In response to these requirements, the Tank Waste Remediation System Operation and Utilization Plan (TWRSO and UP) (Kirkbride et al. 1997) was prepared by the PHMC. The TWRSO and UP, as updated by the Readiness-To-Proceed deliverable (Payne et al. 1998), establishes the baseline operating scenario for the delivery of LAW feed to the Privatization Contractor. The scenario specifies tanks from which LAW will be provided for each feed batch, the operational activities needed to prepare and deliver each batch, and the timing of these activities. The operating scenario was developed based on current knowledge of waste composition and chemistry, waste transfer methods, and operating constraints, such as tank farm logistics and availability of tank space. A project master baseline schedule (PMBS) has been developed to implement the operating scenario. The PMBS also includes activities aimed at reducing programmatic risks. One of the activities, ''Confirm Plans and Requirements,'' was identified to verify the basis used to develop the scenario. Additional data on waste quantity, physical and chemical characteristics, and transfer properties will be needed to support this activity. This document describes the data quality objective (DQO) process undertaken to assme appropriate data will be collected to support the activity, ''Confirm Tank Plans and Requirements.'' The DQO process was implemented in accordance with the TWRS DQO process (Banning 1997) with some modifications to accommodate project or tank-specific requirements and constraints.« less

Multi-mycotoxin analysis of animal feed and animal-derived food using LC-MS/MS system with timed and highly selective reaction monitoring.

PubMed

Zhao, Zhiyong; Liu, Na; Yang, Lingchen; Deng, Yifeng; Wang, Jianhua; Song, Suquan; Lin, Shanhai; Wu, Aibo; Zhou, Zhenlei; Hou, Jiafa

2015-09-01

Mycotoxins have the potential to enter the human food chain through carry-over of contaminants from feed into animal-derived products. The objective of the study was to develop a reliable and sensitive method for the analysis of 30 mycotoxins in animal feed and animal-derived food (meat, edible animal tissues, and milk) using liquid chromatography-tandem mass spectrometry (LC-MS/MS). In the study, three extraction procedures, as well as various cleanup procedures, were evaluated to select the most suitable sample preparation procedure for different sample matrices. In addition, timed and highly selective reaction monitoring on LC-MS/MS was used to filter out isobaric matrix interferences. The performance characteristics (linearity, sensitivity, recovery, precision, and specificity) of the method were determined according to Commission Decision 2002/657/EC and 401/2006/EC. The established method was successfully applied to screening of mycotoxins in animal feed and animal-derived food. The results indicated that mycotoxin contamination in feed directly influenced the presence of mycotoxin in animal-derived food. Graphical abstract Multi-mycotoxin analysis of animal feed and animal-derived food using LC-MS/MS.

Microbial contamination of enteral feeding products in thermoneutral and hyperthermal ICU environments.

PubMed

Perry, Jeffery; Stankorb, Susan M; Salgueiro, Marybeth

2015-02-01

Temperature is known to affect bacterial growth, but current safety recommendations for enteral formula are based on studies conducted in thermoneutral environments, which are not representative of select burn intensive care units (ICUs) that are kept therapeutically hyperthermal. This project evaluated microbial growth in 3 enteral feeding systems: closed, open, and open with modular additives (modular tube feeding [MTF]) exposed to 2 different environments. Product for each of the 3 systems was prepared and hung in both a thermoneutral (23.3°C) and a hyperthermal (32.5°C) ICU room. At baseline, 4 hours, and 8 hours, samples were plated and incubated overnight and the number of colony-forming units (CFUs) counted. In the thermoneutral and hyperthermal environments, there was no evidence of microbial growth in the open or closed feeding systems at any time point. The MTF exhibited baseline contamination with a median of 10 CFUs (95% CI, 8-16) and significant growth over time to 54 CFUs (95% CI, 20-230) by 8 hours in the thermoneutral setting. In the hyperthermal environment, the MTF showed baseline contamination of 390 CFUs (95% CI, 40-1600) and significant growth over time, with 30% of samples exhibiting contamination levels exceeding Food and Drug Administration standards by 4 hours and CFUs being too numerous to count by 8 hours. CFUs in enteral formula did not differ between open and closed feeding systems in either environment for up to 8 hours; however, the addition of modulars to open systems may result in an unacceptable risk of contamination in hyperthermal environments. © 2014 American Society for Parenteral and Enteral Nutrition.

Specific hunger- and satiety-induced tuning of guinea pig enteric nerve activity.

PubMed

Roosen, Lina; Boesmans, Werend; Dondeyne, Marjan; Depoortere, Inge; Tack, Jan; Vanden Berghe, Pieter

2012-09-01

Although hunger and satiety are mainly centrally regulated, there is convincing evidence that also gastrointestinal motor activity and hormone fluctuations significantly contribute to appetite signalling. In this study, we investigated how motility and enteric nerve activity are set by fasting and feeding. By means of video-imaging, we tested whether peristaltic activity differs in ex vivo preparations from fasted and re-fed guinea pigs. Ca(2+) imaging was used to investigate whether the feeding state directly alters neuronal activity, either occurring spontaneously or evoked by (an)orexigenic signalling molecules. We found that pressure-induced (2 cmH(2)O) peristaltic activity occurs at a higher frequency in ileal segments from re-fed animals (re-fed versus fasted, 6.12 ± 0.22 vs. 4.84 ± 0.52 waves min(-1), P = 0.028), even in vitro hours after death. Myenteric neuronal responses were tuned to the feeding status, since neurons in tissues from re-fed animals remained hyper-responsive to high K(+)-evoked depolarization (P < 0.001) and anorexigenic molecules (P < 0.001), while being less responsive to orexigenic ghrelin (P = 0.013). This illustrates that the feeding status remains ‘imprinted' ex vivo. We were able to reproduce this feeding state-related memory in vitro and found humoral feeding state-related factors to be implicated. Although the molecular link with hyperactivity is not entirely elucidated yet, glucose-dependent pathways are clearly involved in tuning neuronal excitability. We conclude that a bistable memory system that tunes neuronal responses to fasting and re-feeding is present in the enteric nervous system, increasing responses to depolarization and anorexigenic molecules in the re-fed state, while decreasing responses to orexigenic ghrelin. Unlike the hypothalamus, where specific cell populations sensitive to either orexigenic or anorexigenic molecules exist, the enteric feeding state-related memory system is present at the functional level of receptor signalling rather than confined to specific neuron subtypes.

Flue gas desulfurization method and apparatus

DOEpatents

Madden, Deborah A.; Farthing, George A.

1998-08-18

A combined furnace limestone injection and dry scrubber flue gas desulfurization (FGD) system collects solids from the flue gas stream in first particulate collection device located downstream of an outlet of a convection pass of the furnace and upstream of the dry scrubber. The collected solids are diverted to the dry scrubber feed slurry preparation system to increase sulfur oxide species removal efficiency and sorbent utilization. The level of lime in the feed slurry provided to the dry scrubber is thus increased, which enhances removal of sulfur oxide species in the dry scrubber. The decreased particulate loading to the dry scrubber helps maintain a desired degree of free moisture in the flue gas stream entering the dry scrubber, which enhances sulfur oxide species removal both in the dry scrubber and downstream particulate collector, normally a baghouse.

Flue gas desulfurization method and apparatus

DOEpatents

Madden, Deborah A.; Farthing, George A.

1998-09-29

A combined furnace limestone injection and dry scrubber flue gas desulfurization (FGD) system collects solids from the flue gas stream in first particulate collection device located downstream of an outlet of a convection pass of the furnace and upstream of the dry scrubber. The collected solids are diverted to the dry scrubber feed slurry preparation system to increase sulfur oxide species removal efficiency and sorbent utilization. The level of lime in the feed slurry provided to the dry scrubber is thus increased, which enhances removal of sulfur oxide species in the dry scrubber. The decreased particulate loading to the dry scrubber helps maintain a desired degree of free moisture in the flue gas stream entering the dry scrubber, which enhances sulfur oxide species removal both in the dry scrubber and downstream particulate collector, normally a baghouse.

Determination of emamectin benzoate in medicated fish feed: a multisite study.

PubMed

Farer, Leslie J

2005-01-01

A new method was developed for the quantitation of emamectin benzoate in medicated fish feed at levels between 1 and 30 ppm. The new procedure, based on a previously reported assay, consists of a wet methanolic extraction of ground feed, followed by solid-phase extraction and injection onto a gradient liquid chromatographic system. A multisite study involving 3 laboratories (the developing laboratory and 2 independent laboratories) was performed to evaluate precision, recovery, linearity, and sensitivity. Mean recove;ries for triplicate analyses at 3 levels, performed by 2 analysts per laboratory, were between 89 and 97%, with coefficients of variation ranging from 1.6 to 8.6%. Coefficients of determination (r2) obtained from the plotted data were > or =0.993. The precision of the method, determined from 6 replicate preparations from the same batch of medicated feed assayed in 3 separate trials per laboratory, was between 0.6 and 5.8%. The quantitation limit was established at 0.5 ppm. Specificity and robustness studies were performed by the developing laboratory.

Systems, compositions, and methods for fluid purification

DOEpatents

Ho, W.S. Winston; Verweij, Hendrik; Shqau, Krenar; Ramasubranian, Kartik

2015-12-22

Disclosed herein are membranes comprising a substrate, a support layer, and a selective layer. In some embodiments the membrane may further comprise a permeable layer. Methods of forming membranes are also disclosed comprising forming a support layer on a substrate, removing adsorbed species from the support layer, preparing a solution containing inorganic materials of a selective layer, contacting the support layer with the solution, drying the membrane, and exposing the membrane to rapid thermal processing. Also disclosed are methods of fluid purification comprising providing a membrane having a feed side and a permeable side, passing a fluid mixture across the feed side of the membrane, providing a driving force for transmembrane permeation, removing from the permeate side a permeate stream enriched in a purified fluid, and withdrawing from the feed side a fluid that is depleted in a purified fluid.

Sustainable production of green feed from carbon dioxide and hydrogen.

PubMed

Landau, Miron V; Vidruk, Roxana; Herskowitz, Moti

2014-03-01

Carbon dioxide hydrogenation to form hydrocarbons was conducted on two iron-based catalysts, prepared according to procedures described in the literature, and on a new iron spinel catalyst. The CO2 conversion measured in a packed-bed reactor was limited to about 60% because of excessive amounts of water produced in this process. Switching to a system of three packed-bed reactors in series with interim removal of water and condensed hydrocarbons increased CO2 conversion to as much as 89%. The pure spinel catalyst displayed a significantly higher activity and selectivity than those of the other iron catalysts. This process produces a product called green feed, which is similar in composition to the product of a high-temperature, iron-based Fischer–Tropsch process from syngas. The green feed can be readily converted into renewable fuels by well-established technologies.

An in vitro study of urea, water, ion and CO2/HCO3- transport in the gastrointestinal tract of the dogfish shark (Squalus acanthias): the influence of feeding.

PubMed

Liew, Hon Jung; De Boeck, Gudrun; Wood, Chris M

2013-06-01

In vitro gut sac preparations made from the cardiac stomach (stomach 1), pyloric stomach (stomach 2), intestine (spiral valve) and colon were used to examine the impact of feeding on transport processes in the gastrointestinal tract of the dogfish shark. Preparations were made from animals that were euthanized after 1-2 weeks of fasting, or at 24-48 h after voluntary feeding on a 3% ration of teleost fish (hake). Sacs were incubated under initially symmetrical conditions with dogfish saline on both surfaces. In comparison to an earlier in vivo study, the results confirmed that feeding caused increases in H(+) secretion in both stomach sections, but an increase in Cl(-) secretion only in stomach 2. Na(+) absorption, rather than Na(+) secretion, occurred in both stomach sections after feeding. All sections of the tract absorbed water and the intestine strongly absorbed Na(+) and Cl(-), regardless of feeding condition. The results also confirmed that feeding increased water absorption in the intestine (but not in the colon), and had little influence on the handling of Ca(2+) and Mg(2+), which exhibited negligible absorption across the tract. However, K(+) was secreted in the intestine in both fasted and fed preparations. Increased intestinal water absorption occurred despite net osmolyte secretion into the mucosal saline. The largest changes occurred in urea and CO2/HCO3(-) fluxes. In fasted preparations, urea was absorbed at a low rate in all sections except the intestine, where it was secreted. Instead of an increase in intestinal urea secretion predicted from in vivo data, feeding caused a marked switch to net urea absorption. This intestinal urea transport occurred at a rate comparable to urea reabsorption rates reported at gills and kidney, and was apparently active, establishing a large serosal-to-mucosal concentration gradient. Feeding also greatly increased intestinal CO2/HCO3(-) secretion; if interpreted as HCO3(-) transport, the rates were in the upper range of those reported in marine teleosts. Phloretin (0.25 mmol l(-1), applied mucosally) completely blocked the increases in intestinal urea absorption and CO2/HCO3(-) secretion caused by feeding, but had no effect on Na(+), Cl(-) or water absorption.

Food consumption and growth rates of juvenile black carp fed natural and prepared feeds

USGS Publications Warehouse

Hodgins, Nathaniel C.; Schramm, Harold L.; Gerard, Patrick D.

2014-01-01

The introduced mollusciphagic black carp Mylopharyngodon piceus poses a significant threat to native mollusks in temperate waters throughout the northern hemisphere, but consumption rates necessary to estimate the magnitude of impact on mollusks have not been established. We measured food consumption and growth rates for small (77–245 g) and large (466–1,071 g) triploid black carp held individually under laboratory conditions at 20, 25, and 30°C. Daily consumption rates (g food · g wet weight fish−1·d−1·100) of black carp that received prepared feed increased with temperature (small black carp 1.39–1.71; large black carp 1.28–2.10), but temperature-related increases in specific growth rate (100[ln(final weight) - ln(initial weight)]/number of days) only occurred for the large black carp (small black carp −0.02 to 0.19; large black carp 0.16–0.65). Neither daily consumption rates (5.90–6.28) nor specific growth rates (0.05–0.24) differed among temperatures for small black carp fed live snails. The results of these laboratory feeding trials indicate food consumption rates can vary from 289.9 to 349.5 J·g−1·d−1 for 150 g black carp receiving prepared feed, from 268.8 to 441.0 J·g−1·d−1for 800 g black carp receiving prepared feed, and from 84.8 to 90.2 J·g−1·d−1 for 150 g black carp that feed on snails. Applying estimated daily consumption rates to estimated biomass of native mollusks indicates that a relatively low biomass of bla

Alternatives to Sedation and General Anesthesia in Pediatric Magnetic Resonance Imaging: A Literature Review.

PubMed

McGuirt, Delaney

2016-09-01

To assess alternatives to sedation and general anesthesia to prepare children for magnetic resonance (MR) imaging examinations. Online databases were searched for articles discussing methods of preparing children for MR imaging procedures. Because of the large number of articles returned, criteria were limited to only studies that prepared patients without the use of sedation or general anesthesia. Twenty-four studies were deemed appropriate for inclusion in the review. The following methods emerged as alternatives to pediatric sedation: mock scanners, MR-compatible audiovisual systems, feed-sleep manipulation, play therapy, infant incubators/immobilizers, photo diaries, sucrose solutions, and guided imagery. The approaches with the most extensive research were mock MR scanners and feed-sleep manipulation. Evidence supports the use of these alternative techniques as valid substitutes for pediatric sedation and general anesthesia. To reduce the risks associated with sedation of pediatric patients, institutions could implement the alternatives discussed in this review. Cost analyses should be conducted first because some methods are more expensive than others. Finally, further research is needed to better assess the effectiveness of lesser-practiced methods, including photo diaries, sucrose solutions, and guided imagery. ©2016 American Society of Radiologic Technologists.

Effect of process conditions on the steam reforming of ethanol with a nano-Ni/SiO2 catalyst.

PubMed

Wu, C; Williams, P T

2012-01-01

In this paper, a nano-Ni/SiO2 catalyst was prepared by a sol-gel method and tested for hydrogen production from ethanol steam reforming using a two-stage fixed-bed reaction system. The reaction conditions, such as reaction temperature, water/ethanol ratio and sample feeding rate, were investigated with the prepared nano-Ni/SiO2 catalyst. Brunauer-Emmett-Teller surface area and porosity, temperature-programmed oxidation, X-ray diffraction and focused ion beam (FIB)/scanning electron microscopy were used in this work to analysis the fresh and/or reacted catalysts. An extended catalyst stability test for ethanol steam reforming with the Ni/SiO2 catalyst was carried out at a reaction temperature of 600 degrees C, when the water/ethanol ratio was kept at 3.5 and sample feeding rate was 4.74 g h(-1). The results showed that a stabilized gas and hydrogen production was obtained with a potential H2 production of about 40 wt.%. Increasing the reaction temperature during ethanol steam reforming with the Ni/SiO2 catalyst resulted in an increase of gas and hydrogen production. The gas yield was slightly reduced when the water/ethanol ratio was increased from 2.0 to 3.5. However, the potential H2 production was increased. The investigation of the sample feeding rate showed that the gas production per hour was increased due to the higher sample feeding rate, but the potential H2 production was reduced.

Aflatoxin Toxicity Reduction in Feed by Enhanced Binding to Surface-Modified Clay Additives

PubMed Central

Jaynes, William F.; Zartman, Richard E.

2011-01-01

Animal feeding studies have demonstrated that clay additives, such as bentonites, can bind aflatoxins in ingested feed and reduce or eliminate the toxicity. Bentonite deposits are found throughout the world and mostly consist of expandable smectite minerals, such as montmorillonite. The surfaces of smectite minerals can be treated with organic compounds to create surface-modified clays that more readily bind some contaminants than the untreated clay. Montmorillonites treated with organic cations, such as hexadecyltrimethylammonium (HDTMA) and phenyltrimethylammonium (PTMA), more effectively remove organic contaminants, such as benzene and toluene, from water than untreated clay. Similarly, montmorillonite treated with PTMA (Kd = 24,100) retained more aflatoxin B1 (AfB1) from aqueous corn flour than untreated montmorillonite (Kd = 944). Feed additives that reduced aflatoxin toxicity in animal feeding studies adsorbed more AfB1 from aqueous corn flour than feed additives that were less effective. The organic cations HDTMA and PTMA are considered toxic and would not be suitable for clay additives used in feed or food, but other non-toxic or nutrient compounds can be used to prepare surface-modified clays. Montmorillonite (SWy) treated with choline (Kd = 13,800) and carnitine (Kd = 3960) adsorbed much more AfB1 from aqueous corn flour than the untreated clay (Kd = 944). A choline-treated clay prepared from a reduced-charge, high-charge montmorillonite (Kd = 20,100) adsorbed more AfB1 than the choline-treated high-charge montmorillonite (Kd = 1340) or the untreated montmorillonite (Kd = 293). Surface-modified clay additives prepared using low-charge smectites and nutrient or non-toxic organic compounds might be used to more effectively bind aflatoxins in contaminated feed or food and prevent toxicity. PMID:22069725

Aflatoxin toxicity reduction in feed by enhanced binding to surface-modified clay additives.

PubMed

Jaynes, William F; Zartman, Richard E

2011-06-01

Animal feeding studies have demonstrated that clay additives, such as bentonites, can bind aflatoxins in ingested feed and reduce or eliminate the toxicity. Bentonite deposits are found throughout the world and mostly consist of expandable smectite minerals, such as montmorillonite. The surfaces of smectite minerals can be treated with organic compounds to create surface-modified clays that more readily bind some contaminants than the untreated clay. Montmorillonites treated with organic cations, such as hexadecyltrimethylammonium (HDTMA) and phenyltrimethylammonium (PTMA), more effectively remove organic contaminants, such as benzene and toluene, from water than untreated clay. Similarly, montmorillonite treated with PTMA (K(d) = 24,100) retained more aflatoxin B1 (AfB1) from aqueous corn flour than untreated montmorillonite (K(d) = 944). Feed additives that reduced aflatoxin toxicity in animal feeding studies adsorbed more AfB1 from aqueous corn flour than feed additives that were less effective. The organic cations HDTMA and PTMA are considered toxic and would not be suitable for clay additives used in feed or food, but other non-toxic or nutrient compounds can be used to prepare surface-modified clays. Montmorillonite (SWy) treated with choline (K(d) = 13,800) and carnitine (K(d) = 3960) adsorbed much more AfB1 from aqueous corn flour than the untreated clay (K(d) = 944). A choline-treated clay prepared from a reduced-charge, high-charge montmorillonite (K(d) = 20,100) adsorbed more AfB1 than the choline-treated high-charge montmorillonite (K(d) = 1340) or the untreated montmorillonite (K(d) = 293). Surface-modified clay additives prepared using low-charge smectites and nutrient or non-toxic organic compounds might be used to more effectively bind aflatoxins in contaminated feed or food and prevent toxicity.

[Nutrition intervention actions in relief situations: report on 4 experiences in Mexico].

PubMed

Madrigal-Fritsch, Herlinda; Ruíz Arregui, Liliana; Pérez Gil Romo, Sara Elena; Cervantes Turrubiates, Leticia; Torre Medina-Mora, Pilar; Ramírez García, Guadalupe; Escobar Pérez, Margarita

2004-06-01

In the last years Mexico faced several natural and human provoked disasters. We choose the Mexico City earthquake, the Chichonal volcano eruption, the Guatemala war and its refugees and the Chiapas armed movement. In all of them the INCMNSZ surveillance system proposal has been applied. To establish the intervention we classified the emergencies according to its magnitude and localization. The intervention consisted in: immediate attention of serious cases, immunizations, quimioprofilaxis, personal hygiene, environment control, nutritional assessment and diet definition. The affected population attended were: in the eruption 4.500, in the earthquake 1.000, in the Guatemala war 19.000 and in the Chiapas movement 6.940. Population damaged by the eruption and the war received mass feeding; complementary feeding (vulnerable groups) and therapeutic feeding (people with tuberculosis and serious undernutrition). In the earthquake people received first, prepared food and later they were organized to bring, plan, prepare and distribute their food. In the Chiapas armed movement people received only special baby food. In all cases, population also receive nutritional information and only with the refugees and the Chiapas damaged people the local food production was promoted. We suggest evaluating every emergency program and share experiences to afford this type of situations in a better way.

Mixed feed evaporator

DOEpatents

Vakil, Himanshu B.; Kosky, Philip G.

1982-01-01

In the preparation of the gaseous reactant feed to undergo a chemical reaction requiring the presence of steam, the efficiency of overall power utilization is improved by premixing the gaseous reactant feed with water and then heating to evaporate the water in the presence of the gaseous reactant feed, the heating fluid utilized being at a temperature below the boiling point of water at the pressure in the volume where the evaporation occurs.

Flue gas desulfurization method and apparatus

DOEpatents

Madden, D.A.; Farthing, G.A.

1998-08-18

A combined furnace limestone injection and dry scrubber flue gas desulfurization (FGD) system collects solids from the flue gas stream in first particulate collection device located downstream of an outlet of a convection pass of the furnace and upstream of the dry scrubber. The collected solids are diverted to the dry scrubber feed slurry preparation system to increase sulfur oxide species removal efficiency and sorbent utilization. The level of lime in the feed slurry provided to the dry scrubber is thus increased, which enhances removal of sulfur oxide species in the dry scrubber. The decreased particulate loading to the dry scrubber helps maintain a desired degree of free moisture in the flue gas stream entering the dry scrubber, which enhances sulfur oxide species removal both in the dry scrubber and downstream particulate collector, normally a baghouse. 5 figs.

Flue gas desulfurization method and apparatus

DOEpatents

Madden, D.A.; Farthing, G.A.

1998-09-29

A combined furnace limestone injection and dry scrubber flue gas desulfurization (FGD) system collects solids from the flue gas stream in first particulate collection device located downstream of an outlet of a convection pass of the furnace and upstream of the dry scrubber. The collected solids are diverted to the dry scrubber feed slurry preparation system to increase sulfur oxide species removal efficiency and sorbent utilization. The level of lime in the feed slurry provided to the dry scrubber is thus increased, which enhances removal of sulfur oxide species in the dry scrubber. The decreased particulate loading to the dry scrubber helps maintain a desired degree of free moisture in the flue gas stream entering the dry scrubber, which enhances sulfur oxide species removal both in the dry scrubber and downstream particulate collector, normally a baghouse. 5 figs.

In vivo detoxification of aflatoxinB1 by magnetic carbon nanostructures prepared from bagasse.

PubMed

Khan, Farhat Ali; Zahoor, Muhammad

2014-10-30

Aflatoxins are serious hazard to poultry industry and human health. Broiler chickens fed on aflatoxin contaminated feed develop various abnormal signs and behavior including less attraction toward feed, abnormal faeces consistency, growth retardation, dirty and ruffled feather, abnormal organs size and weight and blood serum biochemistry. Therefore the study was aimed to detoxify aflatoxin B1 in poultry feed. In this study a novel adsorbent was prepared from bagasse, characterized in vitro and in vivo it was fed to different groups of poultry birds along with aflatoxin B1. The groups were given arbitrary names A, B, C, D, E and F. Group A was fed with normal decontaminated feed, group B was fed with aflatoxin contaminated (200 μg/kg feed) feed while the groups C, D, E and F were fed with aflatoxin contaminated (200 μg/kg feed) feed plus 0.2, 0.3, 0.4 and 0.5% adsorbent respectively. Clinical signs and behavior of the chicks; blood level of alanine transferase, alkaline phosphatase, serum albumen, serum total proteins and serum globulin; Mortality; Body and organ weights; Hemorrhages in organs etc. were monitored in order to study the efficacy of the adsorbent for binding of aflatoxin B1 in the gastrointestinal tract of chickens. Statistical approach was adopted to analyze the data. It was found that adsorbent amount 0.3%/kg feed was highly effective to adsorb and detoxify aflatoxin B1 in gastrointestinal tract of broiler chickens and pass safely leaving no harmful effects. However the results of groups E and F fed on 0.4% and 0.5% respectively showed slight variation in tested parameters from group A. The prepared adsorbent was efficient for the detoxification of aflatoxin B1 in gastrointestinal tract of chicks and no negative symptoms associated with the use of activated carbon as previously reported were observed for the adsorbent under study.

Electronic nose for the identification of pig feeding and ripening time in Iberian hams.

PubMed

Santos, J P; García, M; Aleixandre, M; Horrillo, M C; Gutiérrez, J; Sayago, I; Fernández, M J; Arés, L

2004-03-01

An electronic nose system to control the processing of dry-cured Iberian ham is presented. The sensors involved are tin oxide semiconductors thin films. They were prepared by RF sputtering. Some of the sensors were doped with metal catalysts as Pt and Pd, in order to improve the selectivity of the sensors. The multisensor with 16 semiconductor sensors, gave different responses from two types of dry-cured Iberian hams which differ in the feeding and curing time. The data has been analysed using the PCA (principal component analysis) and backpropagation and probabilistic neural networks. The analysis shows that different types of Iberian ham can be discriminated and identified successfully.

Effect of pregelatination on rheology, cooking and antioxidant activity of pasta.

PubMed

Rafiq, Aasima; Sharma, Savita; Singh, Baljit

2018-05-01

The present study explores the possibility of using twin screw extruder for preparation of pregelatinized pasta. The effects of extrusion parameters feed moisture (28 and 32%), barrel temperature (60-105 °C) and screw speed (100-200 rpm) on pregelatinized pasta were investigated. Prepared pasta was analysed for quality characteristics in terms of cooking quality, degree of gelatinization, color, texture, pasting properties, bioactive composition. Results indicated that higher screw speed improved the cooking quality of pasta and decreased gruel solid loss. Degree of gelatinization revealed positive relation with temperature and feed moisture. Extrusion conditions, altered the color of pasta, a decrease in L*, increase in a* and b* values was observed. Higher peak viscosity was observed at lower barrel temperature and feed moisture. A significant retention in total phenolic content and flavonoid content was observed with higher feed moisture. Extrusion leads to increase in antioxidant activity and firmness upon increasing screw speed and feed moisture.

Membrane Separation Processes at Low Temperatures

NASA Technical Reports Server (NTRS)

Parrish, Clyde

2002-01-01

The primary focus of Kennedy Space Center's gas separation activities has been for carbon dioxide, nitrogen, and argon used in oxygen production technologies for Martian in-situ resource utilization (ISRU) projects. Recently, these studies were expanded to include oxygen for regenerative life support systems. Since commercial membrane systems have been developed for separation of carbon dioxide, nitrogen, and oxygen, initially the studies focused on these membrane systems, but at lower operating temperatures and pressures. Current investigations art examining immobilized liquids and solid sorbents that have the potential for higher selectivity and lower operating temperatures. The gas separation studies reported here use hollow fiber membranes to separate carbon dioxide, nitrogen, and argon in the temperature range from 230 to 300 K. Four commercial membrane materials were used to obtain data at low feed and permeate pressures. These data were used with a commercial solution-diffusion modeling tool to design a system to prepare a buffer gas from the byproduct of a process to capture Martian carbon dioxide. The system was designed to operate, at 230 K with a production rate 0.1 sLpm; Feed composition 30% CO2, 44% N2, and 26% Ar; Feed pressure 104 kPa (780); and Permeate pressure 1 kPa (6 torr); Product concentration 600 ppm CO2. This new system was compared with a similar system designed to operate at ambient temperatures (298 K). The systems described above, along with data, test apparatus, and models are presented.

Bacteriological Evaluation of an Ultra-Pure Water-Distilling System

PubMed Central

Kayser, W. V.; Hickman, K. C. D.; Bond, W. W.; Favero, M. S.; Carson, L. A.

1975-01-01

A prototype distillation and storage system with recycle for producing ultrapure water was monitored for bacteriological contamination during a period of 24 months. Naturally occurring Pseudomonas aeruginosa and P. cepacia were found to grow rapidly to levels of about 105/ml in water taken from the storage reservoir and also in commercially prepared distilled water. The system was found to eliminate bacterial contaminants introduced into the still with the feed water, but the reservoir, once contaminated, remained contaminated during prolonged recycle. After a single treatment with free chlorine, the entire system remained uncontaminated until accidental or purposeful shutdown. PMID:811168

[Research about effect of spray drying conditions on hygroscopicity of spray dry powder of gubi compound's water extract and its mechanism].

PubMed

Zong, Jie; Shao, Qi; Zhang, Hong-Qing; Pan, Yong-Lan; Zhu, Hua-Xu; Guo, Li-Wei

2014-02-01

To investigate moisture content and hygroscopicity of spray dry powder of Gubi compound's water extract obtained at different spray drying conditions and laying a foundation for spray drying process of Chinese herbal compound preparation. In the paper, on the basis of single-factor experiments, the author choose inlet temperature, liquid density, feed rate, air flow rate as investigated factors. The experimental absorption rate-time curve and scanning electron microscopy results showed that under different spray drying conditions the spray-dried powders have different morphology and different adsorption process. At different spray-dried conditions, the morphology and water content of the powder is different, these differences lead to differences in the adsorption process, at the appropriate inlet temperature and feed rate with a higher sample density and lower air flow rate, in the experimental system the optimum conditions is inlet temperature of 150 degrees C, feed density of 1.05 g x mL(-1), feed rate of 20 mL x min(-1) air flow rate of 30 m3 x h(-1).

Goals, dilemmas and assumptions in infant feeding education and support. Applying theory of constraints thinking tools to develop new priorities for action.

PubMed

Trickey, Heather; Newburn, Mary

2014-01-01

Three important infant feeding support problems are addressed: (1) mothers who use formula milk can feel undersupported and judged; (2) mothers can feel underprepared for problems with breastfeeding; and (3) many mothers who might benefit from breastfeeding support do not access help. Theory of constraints (TOC) is used to examine these problems in relation to ante-natal education and post-natal support. TOC suggests that long-standing unresolved problems or 'undesirable effects' in any system (in this case a system to provide education and support) are caused by conflicts, or dilemmas, within the system, which might not be explicitly acknowledged. Potential solutions are missed by failure to question assumptions which, when interrogated, often turn out to be invalid. Three core dilemmas relating to the three problems are identified, articulated and explored using TOC methodology. These are whether to: (1) promote feeding choice or to promote breastfeeding; (2) present breastfeeding positively, as straightforward and rewarding, or focus on preparing mothers for problems; and (3) offer support proactively or ensure that mothers themselves initiate requests for support. Assumptions are identified and interrogated, leading to clarified priorities for action relating to each problem. These are (1) shift the focus from initial decision-making towards support for mothers throughout their feeding journeys, enabling and protecting decisions to breastfeed as one aspect of ongoing support; (2) to promote the concept of an early-weeks investment and adjustment period during which breastfeeding is established; and (3) to develop more proactive mother-centred models of support for all forms of infant feeding. © 2012 John Wiley & Sons Ltd.

40 CFR 63.606 - Performance tests and compliance provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The P2O5 content (Rp) of the feed..., No. 1 Preparation of Sample. (B) Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus...

40 CFR 63.606 - Performance tests and compliance provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The P2O5 content (Rp) of the feed..., No. 1 Preparation of Sample. (B) Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus...

NTP technical report on comparative toxicity and carcinogenicity studies of o-nitrotoluene and o-toluidine hydrochloride. (Cas Nos. 88-72-2 and 636-21-5) administered in feed to male f344/n rats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elwell, M.R.

1996-03-01

;Contents: Introduction (Physical and Chemical Properties, Production, Use, and Exposure, Disposition and Metabolism, Toxicity, Study Rationale and Design); Materials and Methods (Procurement and Characterization of 0-Nitroluene and o-Toluidine Hydrochloride, Preparation and Analysis of Dose Formulations, Preparation of Antibiotic Mixture, Toxicity Study Designs, Statistical Methods, Quality Assurance); Results (26-Week Feed Studies in Male F344/N Rats).

KSC-08pd0069

NASA Image and Video Library

2008-01-17

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Space Center, technicians prepare the cover to be installed over the engine cutoff, or ECO, sensor system connector and wiring on space shuttle Atlantis' external tank. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector were precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The launch date for the shuttle's STS-122 mission has now been targeted for Feb. 7. Photo credit: NASA/Kim Shiflett

Investigation of polyvinylchloride and cellulose acetate blend membranes for desalination

NASA Astrophysics Data System (ADS)

El-Gendi, Ayman; Abdallah, Heba; Amin, Ashraf; Amin, Shereen Kamel

2017-10-01

The pollution of water resources, severe climate changes, rapid population growth, increasing agricultural demands, and rapid industrialization insist the development of innovative technologies for generating potable water. Polyvinylchloride/cellulose acetate (PVC/CA) membranes were prepared using phase inversion technique for seawater reverse osmosis (SWRO). The membrane performance was investigated using Red Sea water (El-Ein El-Sokhna-Egypt). The membrane performance indicated that the prepared membranes were endowed to work under high pressure; increasing in feeding operating pressure led to increase permeate flux and rejection. Increasing feed operating pressure from zero to 40 bar led to increase in the salt rejection percent. Salt rejection percent reached to 99.99% at low feed concentration 5120 ppm and 99.95% for Red Sea water (38,528 ppm). The prepared membranes were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectrophotometry, and mechanical properties. SEM, FTIR and mechanical results were used to distinguish the best membrane for desalination. According to characterization results, one prepared membrane was selected to run performance test in desalination testing unit. The membrane (M3) showed excellent performance and stability under different operating conditions and during the durability test for 36 days.

KSC-08pd0004

NASA Image and Video Library

2008-01-04

KENNEDY SPACE CENTER, FLA. -- At a lab at NASA's Kennedy Space Center, aerospace technicians with the United Launch Alliance inspect an electrical wiring harness that has been inserted into a replacement feed-through connector during preparations to solder the pins to the socket of the connector that will be installed in the external fuel tank for space shuttle Atlantis' STS-122 mission. The technicians performed this exacting task on the Centaur upper stage for Atlas and Titan launches in 1994 and were specifically chosen for the task. Soldering the connector pins and sockets together addresses the most likely cause of a problem in the engine cutoff sensor system, or ECO system. Some of the tank's ECO sensors failed during propellant tanking for launch attempts on Dec. 6 and Dec. 9. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The feed-through connector passes the wires from the inside of the tank to the outside. After the soldering is completed and the connector is reinstalled, shuttle program managers will decide on how to proceed. The launch date for mission STS-122 is under review. Photo credit: NASA/Kim Shiflett

KSC-08pd0001

NASA Image and Video Library

2008-01-04

KENNEDY SPACE CENTER, FLA. -- At a lab at NASA's Kennedy Space Center, a Lockheed Martin technician prepares an electrical wiring harness during a procedure to solder the pins to the socket of the replacement feed-through connector that will be installed in the external fuel tank for space shuttle Atlantis' STS-122 mission. Two United Launch Alliance technicians, who performed this exacting task on the Centaur upper stage for Atlas and Titan launches in 1994, will be doing the soldering. Soldering the connector pins and sockets together addresses the most likely cause of a problem in the engine cutoff sensor system, or ECO system. Some of the tank's ECO sensors failed during propellant tanking for launch attempts on Dec. 6 and Dec. 9. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The feed-through connector passes the wires from the inside of the tank to the outside. After the soldering is completed and the connector is reinstalled, shuttle program managers will decide on how to proceed. The launch date for mission STS-122 is under review. Photo credit: NASA/Kim Shiflett

KSC-08pd0003

NASA Image and Video Library

2008-01-04

KENNEDY SPACE CENTER, FLA. -- At a lab at NASA's Kennedy Space Center, Kevin Wyckoff, an aerospace technician with the United Launch Alliance, inserts an electrical wiring harness into a replacement feed-through connector during preparations to solder the pins to the socket of the connector. The connector will later be installed in the external fuel tank for space shuttle Atlantis' STS-122 mission. The technician performed this exacting task on the Centaur upper stage for Atlas and Titan launches in 1994 and was specifically chosen for the task. Soldering the connector pins and sockets together addresses the most likely cause of a problem in the engine cutoff sensor system, or ECO system. Some of the tank's ECO sensors failed during propellant tanking for launch attempts on Dec. 6 and Dec. 9. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The feed-through connector passes the wires from the inside of the tank to the outside. After the soldering is completed and the connector is reinstalled, shuttle program managers will decide on how to proceed. The launch date for mission STS-122 is under review. Photo credit: NASA/Kim Shiflett

Flight feeding systems design and evaluation. [the Apollo inflight menu design

NASA Technical Reports Server (NTRS)

Huber, C. S.

1973-01-01

The Apollo flight menu design is fully recounted for Apollo missions 7 through 17, to show modifications that were introduced to the Apollo food system, to document the range of menus and nutritional quality, and to describe packaging and preparation procedures for each class of food item. Papers concerning the Apollo 14 food system, and nutrition systems for pressure suits are included, and the following special topics are treated in depth: (1) food handling procedures; (2) modification of the physical properties of freeze dried rice; (3) stabilization of aerospace food waste; and (4) identification and quantitation of hexadecanal and octadecanal in broiler muscle phospholipids.

Examining variability in parent feeding practices within a low-income, racially/ethnically diverse, and immigrant population using ecological momentary assessment.

PubMed

Berge, Jerica M; Tate, Allan; Trofholz, Amanda; Loth, Katie; Miner, Michael; Crow, Scott; Neumark-Sztainer, Dianne

2018-04-21

Current measures of parent feeding practices are typically survey-based and assessed as static/unchanging characteristics, failing to account for fluctuations in these behaviors across time and context. The current study uses ecological momentary assessment to examine variability of, and predictors of, parent feeding practices within a low-income, racially/ethnically diverse, and immigrant sample. Children ages 5-7 years old and their parents (n = 150 dyads) from six racial/ethnic groups (n = 25 from each; Black/African American, Hispanic, Hmong, Native American, Somali, White) were recruited for this mixed-methods study through primary care clinics. Among parents who used restriction (49%) and pressure-to-eat (69%) feeding practices, these feeding practices were utilized about every other day. Contextual factors at the meal associated with parent feeding practices included: number of people at the meal, who prepared the meal, types of food served at meals (e.g., pre-prepared, homemade, fast food), meal setting (e.g., kitchen table, front room), and meal emotional atmosphere (p < 0.05). Parents tended to restrict desserts, dairy, and vegetables and pressure children to eat fruits, vegetables, meat proteins, and refined grains (p < 0.05). There were some differences by race/ethnicity across findings (p < 0.01), with Hmong parents engaging in the highest levels of pressure-to-eat feeding practices. Parent feeding practices varied across the week, indicating feeding practices are more likely to be context-specific, or state-like than trait-like. There were some meal characteristics more strongly associated with engaging in restriction and pressure-to-eat feeding practices. Given that parent feeding practices appear to be state-like, future interventions and health care providers who work with parents and children may want to address contextual factors associated with parent feeding practices to decrease restriction and pressure-to-eat parent feeding practices. Copyright © 2018 Elsevier Ltd. All rights reserved.

Melter Throughput Enhancements for High-Iron HLW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, A. A.; Gan, Hoa; Joseph, Innocent

2012-12-26

This report describes work performed to develop and test new glass and feed formulations in order to increase glass melting rates in high waste loading glass formulations for HLW with high concentrations of iron. Testing was designed to identify glass and melter feed formulations that optimize waste loading and waste processing rate while meeting all processing and product quality requirements. The work included preparation and characterization of crucible melts to assess melt rate using a vertical gradient furnace system and to develop new formulations with enhanced melt rate. Testing evaluated the effects of waste loading on glass properties and themore » maximum waste loading that can be achieved. The results from crucible-scale testing supported subsequent DuraMelter 100 (DM100) tests designed to examine the effects of enhanced glass and feed formulations on waste processing rate and product quality. The DM100 was selected as the platform for these tests due to its extensive previous use in processing rate determination for various HLW streams and glass compositions.« less

KSC-08pd0037

NASA Image and Video Library

2008-01-13

KENNEDY SPACE CENTER, FLA. -- Lloyd Johns, with Lockheed Martin, prepares the area where the replacement feed-through connector in the engine cutoff, or ECO, sensor system on space shuttle Atlantis' external tank will be installed. Seen next to Johns' arm is the internal connector. The area is wrapped in material for weather protection. Berger wears safety equipment as helium gas is employed to keep the equipment under wrap dry. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector have been precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The work is being done on Launch Pad 39A. Space shuttle Atlantis is now targeted for launch on Feb. 7. Photo credit: NASA/George Shelton

Sentence alignment using feed forward neural network.

PubMed

Fattah, Mohamed Abdel; Ren, Fuji; Kuroiwa, Shingo

2006-12-01

Parallel corpora have become an essential resource for work in multi lingual natural language processing. However, sentence aligned parallel corpora are more efficient than non-aligned parallel corpora for cross language information retrieval and machine translation applications. In this paper, we present a new approach to align sentences in bilingual parallel corpora based on feed forward neural network classifier. A feature parameter vector is extracted from the text pair under consideration. This vector contains text features such as length, punctuate score, and cognate score values. A set of manually prepared training data has been assigned to train the feed forward neural network. Another set of data was used for testing. Using this new approach, we could achieve an error reduction of 60% over length based approach when applied on English-Arabic parallel documents. Moreover this new approach is valid for any language pair and it is quite flexible approach since the feature parameter vector may contain more/less or different features than that we used in our system such as lexical match feature.

Provision versus promotion to develop a handwashing station: the effect on desired handwashing behavior.

PubMed

Biswas, Debashish; Nizame, Fosiul Alam; Sanghvi, Tina; Roy, Sumitro; Luby, Stephen P; Unicomb, Leanne E

2017-05-05

Diarrhea prevalence increases from around the time that complementary foods are introduced. Improving caregiver's hand hygiene during food preparation could reduce complementary food contamination and enteric pathogen transmission. Washing hands with soap is more common when water and soap are together at a convenient location. We conducted a three-month pilot intervention to evaluate two options for setting up handwashing stations: i) provide a handwashing station, or ii) help the family to make their own from available materials. Additionally, we assessed the feasibility of this intervention to be integrated with a child feeding program. We conducted the intervention among two groups; 40 households received a free of cost handwashing station and another 40 households were motivated to place their own soap/soapy-water and water vessel near the food preparation and child feeding area. Community health workers encouraged caregivers to wash hands with soap/soapy-water before food preparation and feeding a child. They either assisted study participants to install the study-provided handwashing station at the recommended place or encouraged caregivers to develop their own. Field researchers assessed placement and composition of handwashing stations and the feasibility of integrating handwashing and nutrition messages. By end of the trial, 39/40 households developed their own handwashing station, comprising a bucket, mug and bar soap/soapy-water of which 60% (6/10) households were observed with a functional and complete handwashing station set. Observed handwashing with soap was detected among 8/10 households from the study-provided handwashing station group and 5/10 among households who had made their own handwashing station. Sixty-seven of the 76 caregivers recalled integrated intervention messages on social and health benefits of infant and young child feeding correctly; and all recalled key handwashing with soap times, before food preparation and feeding a child. Encouraging households to develop their own handwashing station with soap and water to place at a food preparation/child feeding location is feasible over the short term. In the absence of large-scale provision of handwashing stations, caregivers can be encouraged to create and use their own. Integrating handwashing with soap into a nutrition intervention was feasible and acceptable and should be considered by policy makers.

Modified Atmosphere Packaging and Its Feasibility for Military Feeding Systems

DTIC Science & Technology

1994-12-01

must be taken in all food processing . There are special precautions for NAP foods because a MAP food will not be sterilized and contamination or...Food Engineering. October: 62-63. 3 Rice, J., 1989. Modified Atmosphere Packaging. Food Processing . March: 60-76. 4 Coulon, M., and P. Louis, 1989...Prepared Foods. May:131. 9 Rice, J., 1989. Gas-Emitting Wafers: A Cost Effective NAP Approach. Food Processing . September:42. 10 Rice, J., 1991

Attitudes and education of pediatric house staff concerning breast-feeding.

PubMed

Freed, G L; Jones, T M; Fraley, J K

1992-05-01

Pediatricians are expected to offer information and advice on breast-feeding to expectant and lactating mothers, but the educational experience for pediatric residents may not adequately prepare them for this responsibility. To examine knowledge and confidence regarding breast-feeding gained by pediatric house staff during their residency, a survey was administered to pediatric residents in a large, hospital-based training program. Of 108 program residents, 87 (81%) participated. Forty-one percent of the respondents were postgraduate level I (PL-I), 29% were PL-II, and 30% were PL-III. There was no evidence that PL-III residents were more competent or comfortable with routine breast-feeding counseling or intervention than their PL-I counterparts. Residents who had breast-fed, those with spouses who had breast-fed, and those with children of their own had the greatest knowledge and confidence base in several areas, such as their ability to teach breast-feeding techniques and to treat cracked nipples. They were also more familiar with different types of breastpumps. There were no significant differences among those who were or were not breast-fed as a child nor among men versus women. Residency programs must provide comprehensive education on breast-feeding to prepare future pediatricians to meet the needs of patients and their parents.

What about the Bottle? Answers to Common Questions.

ERIC Educational Resources Information Center

Laird, Valerie

2001-01-01

Acknowledges the large amount of confusing information about bottle feeding in areas including nutrition, sanitation, dental health, psychology, and child development. Answers specific questions pertaining to choice of formula and formula preparation, supporting breastfeeding, bottle choice, solid food introduction, feeding position, spitting up,…

Bulk heterojunction thin film formation by single and dual feed ultrasonic spray method for application in organic solar cells

NASA Astrophysics Data System (ADS)

Marathe, D. M.; Tarkas, H. S.; Mahajan, M. S.; Lonkar, G. S.; Tak, S. R.; Sali, J. V.

2016-09-01

We here present a way of preparing the polymer: fullerene BHJ using dual feed method which can lead to formation of pure phases. In this report, we present results of our initial experiments in this direction. The effect of process parameters on the thickness and surface roughness of the active layer has been discussed. The structural and optical properties have been studied using the optical microscope, UV—visible spectroscopy and photoluminescence spectroscopy. Significant PL quenching indicates efficient charge separation in the BHJ formed using this technique. We have also compared the BHJ thin films prepared with this dual feed ultrasonic technique with the single feed spray method. The BHJ formed using this technique has been used as an active layer in OSC. supported by the University Grants Commission, New Delhi, under Faculty Improvement Programme (No. 33-02/12(WRO) Dt.19.03.2013) and the Special Assistance Programme (530/2/DRS/2010(SAP-I)) Phase-II.

Doxycycline and sulfadimethoxine transfer from cross-contaminated feed to chicken tissues.

PubMed

Segato, G; Benetti, C; Angeletti, R; Montesissa, C; Biancotto, G

2011-01-01

During feed preparation at feed mills or during feed mixing in bins at farms, the accidental contamination of feed at trace levels by veterinary drug residues, commonly known as carry-over, can accidentally but frequently occur. To evaluate the concentrations of residual antimicrobials in poultry edible tissues, due to contaminated feed, sulfadimethoxine and doxycycline were administered for 10 days to chickens in poultry feed incurred at the contamination levels frequently found during national feed monitoring programmes (1-5 mg kg(-1)). Sulfadimethoxine and doxycycline residual concentrations detected in muscle (

KSC-08pd0070

NASA Image and Video Library

2008-01-17

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Space Center, technicians prepare the cover to be installed over the engine cutoff, or ECO, sensor system connector and wiring on space shuttle space shuttle Atlantis' external tank. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector were precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The launch date for the shuttle's STS-122 mission has now been targeted for Feb. 7. Photo credit: NASA/Kim Shiflett

L-Cysteine/D,L-homocysteine-regulated ileum motility via system L and B°(,+) transporter: Modification by inhibitors of hydrogen sulfide synthesis and dietary treatments.

PubMed

Yamane, Satoshi; Nomura, Ryouya; Yanagihara, Madoka; Nakamura, Hiroyuki; Fujino, Hiromichi; Matsumoto, Kenjiro; Horie, Syunji; Murayama, Toshihiko

2015-10-05

Previous studies including ours demonstrated that L-cysteine treatments decreased motility in gastrointestinal tissues including the ileum via hydrogen sulfide (H2S), which is formed from sulfur-containing amino acids such as L-cysteine and L-homocysteine. However, the amino acid transport systems involved in L-cysteine/L-homocysteine-induced responses have not yet been elucidated in detail; therefore, we investigated these systems pharmacologically by measuring electrical stimulation (ES)-induced contractions with amino acids in mouse ileum preparations. The treatments with L-cysteine and D,L-homocysteine inhibited ES-induced contractions in ileum preparations from fasted mice, and these responses were decreased by the treatment with 2-aminobicyclo[2.2.1]heptane-2-carboxylate (BCH), an inhibitor of systems L and B°(,+). The results obtained using ileum preparations and a model cell line (PC12 cells) with various amino acids and BCH showed that not only L-cysteine, but also aminooxyacetic acid and D,L-propargylglycine, which act as H2S synthesis inhibitors, appeared to be taken up by these preparations/cells in L and B°(,+) system-dependent manners. The L-cysteine and D,L-homocysteine responses were delayed and abolished, respectively, in ileum preparations from fed mice. Our results suggested that the regulation of ileum motility by L-cysteine and D,L-homocysteine was dependent on BCH-sensitive systems, and varied depending on feeding in mice. Therefore, the effects of aminooxyacetic acid and D,L-propargylglycine on transport systems need to be considered in pharmacological analyses. Copyright © 2015 Elsevier B.V. All rights reserved.

A study on various methods of supplying propellant to an orbit insertion rocket engine

NASA Technical Reports Server (NTRS)

Boretz, J. E.; Huniu, S.; Thompson, M.; Pagani, M.; Paulsen, B.; Lewis, J.; Paul, D.

1980-01-01

Various types of pumps and pump drives were evaluated to determine the lightest weight system for supplying propellants to a planetary orbit insertion rocket engine. From these analyses four candidate propellant feed systems were identified. Systems Nos. 1 and 2 were both battery powered (lithium-thionyl-chloride or silver-zinc) motor driven pumps. System 3 was a monopropellant gas generator powered turbopump. System 4 was a bipropellant gas generator powered turbopump. Parameters considered were pump break horsepower, weight, reliability, transient response and system stability. Figures of merit were established and the ranking of the candidate systems was determined. Conceptual designs were prepared for typical motor driven pumps and turbopump configurations for a 1000 lbf thrust rocket engine.

Anti-obesity effects of Rapha diet® preparation in mice fed a high-fat diet

PubMed Central

Kim, Jihyun; Kyung, Jangbeen; Kim, Dajeong; Choi, Ehn-Kyoung; Bang, Paul

2012-01-01

The anti-obesity activities of Rapha diet® preparation containing silkworm pupa peptide, Garcinia cambogia, white bean extract, mango extract, raspberry extract, cocoa extract, and green tea extract were investigated in mice with dietary obesity. Male C57BL/6 mice were fed a high-fat diet (HFD) containing 3% Rapha diet® preparation for 8 weeks, and blood and tissue parameters of obesity were analyzed. The HFD markedly enhanced body weight gain by increasing the weights of epididymal, perirenal, and mesenteric adipose tissues. The increased body weight gain induced by HFD was significantly reduced by feeding Rapha diet® preparation, in which decreases in the weight of abdominal adipose tissue and the size of abdominal adipocytes were confirmed by microscopic examination. Long-term feeding of HFD increased blood triglycerides and cholesterol levels, leading to hepatic lipid accumulation. However, Rapha diet® preparation not only reversed the blood lipid levels, but also attenuated hepatic steatosis. The results indicate that Rapha diet® preparation could improve HFD-induced obesity by reducing both lipid accumulation and the size of adipocytes. PMID:23326287

Who pays for the health benefits of exclusive breastfeeding? An analysis of maternal time costs.

PubMed

Smith, J P; Forrester, Robert

2013-11-01

The benefits of exclusive breastfeeding, including public health cost savings, are widely recognized, but breastfeeding requires maternal time investments. This study investigates the time taken to exclusively breastfeed at 6 months compared with not exclusively breastfeeding. Time use data were examined from an Australian survey of new mothers conducted during 2005-2006. Data from 139 mothers with infants age 6 months were analyzed using chi-square tests of independence to examine socioeconomic and demographic characteristics and 2-sided t tests to compare average weekly hours spent on milk feeding, feeding solids, preparing feeds, and the total of these. The comparison was of exclusively breastfeeding mothers with other mothers. We also compared exclusively breastfeeding with partially breastfeeding and formula feeding mothers using a 1-way between-groups analysis of variance (ANOVA). The exclusively breastfeeding (vs other) mothers spent 7 hours extra weekly on milk feeding their infants but 2 hours less feeding solids. These differences were statistically significant. ANOVA revealed significant differences between exclusively breastfeeding mothers, breastfeeding mothers who had introduced solids, and mothers who fed any formula, in time spent feeding milk, and solids, and preparing feeds. Exclusive breastfeeding is time intensive, which is economically costly to women. This may contribute to premature weaning for women who are time-stressed, lack household help from family, or cannot afford paid help. Gaining public health benefits of exclusive breastfeeding requires strategies to share maternal lactation costs more widely, such as additional help with housework or caring for children, enhanced leave, and workplace lactation breaks and suitable child care.

Acid-base responses to feeding and intestinal Cl- uptake in freshwater- and seawater-acclimated killifish, Fundulus heteroclitus, an agastric euryhaline teleost.

PubMed

Wood, Chris M; Bucking, Carol; Grosell, Martin

2010-08-01

Marine teleosts generally secrete basic equivalents (HCO(3)(-)) and take up Na(+) and Cl(-) in the intestine so as to promote absorption of H(2)O. However, neither the integration of these functions with feeding nor the potential role of the gut in ionoregulation and acid-base balance in freshwater have been well studied. The euryhaline killifish (Fundulus heteroclitus) is unusual in lacking both an acid-secreting stomach and a mechanism for Cl(-) uptake at the gills in freshwater. Responses to a satiation meal were evaluated in both freshwater- and seawater-acclimated killifish. In intact animals, there was no change in acid or base flux to the external water after the meal, in accord with the absence of any post-prandial alkaline tide in the blood. Indeed, freshwater animals exhibited a post-prandial metabolic acidosis ('acidic tide'), whereas seawater animals showed no change in blood acid-base status. In vitro gut sac experiments revealed a substantially higher rate of Cl(-) absorption by the intestine in freshwater killifish, which was greatest at 1-3 h after feeding. The Cl(-) concentration of the absorbate was higher in preparations from freshwater animals than from seawater killifish and increased with fasting. Surprisingly, net basic equivalent secretion rates were also much higher in preparations from freshwater animals, in accord with the 'acidic tide'; in seawater preparations, they were lowest after feeding and increased with fasting. Bafilomycin (1 micromol l(-1)) promoted an 80% increase in net base secretion rates, as well as in Cl(-) and fluid absorption, at 1-3 h post-feeding in seawater preparations only, explaining the difference between freshwater and seawater fish. Preparations from seawater animals at 1-3 h post-feeding also acidified the mucosal saline, and this effect was associated with a marked rise in P(CO(2)), which was attenuated by bafilomycin. Measurements of chyme pH from intact animals confirmed that intestinal fluid (chyme) pH and basic equivalent concentration were lowest after feeding in seawater killifish, whereas P(CO(2)) was greatly elevated (80-95 Torr) in chyme from both seawater and freshwater animals but declined to lower levels (13 Torr) after 1-2 weeks fasting. There were no differences in pH, P(CO(2)) or the concentrations of basic equivalents in intestinal fluid from seawater versus freshwater animals at 12-24 h or 1-2 weeks post-feeding. The results are interpreted in terms of the absence of gastric HCl secretion, the limitations of the gills for acid-base balance and Cl(-) transport, and therefore the need for intestinal Cl(-) uptake in freshwater killifish, and the potential for O(2) release from the mucosal blood flow by the high P(CO(2)) in the intestinal fluids. At least in seawater killifish, H(+)-ATPase running in parallel to HCO(3)(-):Cl(-) exchange in the apical membranes of teleost enterocytes might reduce net base secretion and explain the high P(CO(2)) in the chyme after feeding.

Does Breast Feeding Protect the Hypothyroid Infant Diagnosed by Newborn Screening?

ERIC Educational Resources Information Center

Rovet, Joanne F.

Because breast milk contains small quantities of thyroid hormones not found in commercial formula preparations, it was hypothesized that breast feeding may provide some protective benefit to the hypothyroid infant before medical treatment is begun. Of 108 children with congenital hypothyroidism, breast-fed children had higher thyroid hormone…

76 FR 37142 - Endangered and Threatened Wildlife and Plants; Incidental Take Permit Application; Proposed Low...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

...] Endangered and Threatened Wildlife and Plants; Incidental Take Permit Application; Proposed Low-Effect... (Aphelocoma coerulescens) (scrub-jay) breeding, feeding, and sheltering habitat incidental to lot preparation... taking approximately 0.23 acre (0.1 hectares (ha)) of Florida scrub-jay breeding, feeding, and sheltering...

76 FR 12751 - Endangered and Threatened Wildlife and Plants; Receipt of Applications for Incidental Take...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-08

...] Endangered and Threatened Wildlife and Plants; Receipt of Applications for Incidental Take Permits... coerulescens) (scrub- jay) breeding, feeding, and sheltering habitat incidental to land preparation for the... approximately 1.75 acres (0.71 hectares (ha)) of scrub-jay breeding, feeding, and sheltering habitat incidental...

Good Food for My Baby.

ERIC Educational Resources Information Center

Pizzo, Peggy Daly; Pizzo, Philip

Prenatal and infant nutritional needs and eating patterns are described and illustrated (in picture-book style) in this brief story about a mother and her infant son. Balanced diets, vitamin supplements, breast feeding, weaning, and infant food preparation are discussed. Mothers are encouraged to breast feed because it is cheaper and "the…

Fluoridation and Defluoridation. Training Module 2.230.2.77.

ERIC Educational Resources Information Center

McMullen, L. D.

This document is an instructional module package prepared in objective form for use by an instructor familiar with fluoridation and fluoride feeding equipment. Enclosed are objectives, an instructor guide, student handouts and transparency masters. The module considers the principles and purposes of fluoridation, methods of feeding fluoride,…

Agricultural Education Science Activity--Nos. AS 1-4.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Agricultural Curriculum Materials Service.

This packet contains four science learning activities on the subject of animal science that can be used in agricultural education courses. The activities cover these topics: (1) identifying internal parasites in domestic livestock; (2) the effect of feed preparation on feed palatability and consumption; (3) determining the absorption abilities of…

Pancreatic enzymes prepared in bicarbonate solution for administration through enteral feeding tubes.

PubMed

Boullata, Angela M; Boullata, Joseph I

2015-07-15

The dissolution and physicochemical effects of preparing delayed-release pancrelipase in a sodium bicarbonate solution before administration via an enteral feeding tube were studied. Several doses of four delayed-release pancrelipase products (Creon, Pancreaze, Ultresa, Zenpep) were studied. The intact contents of pancrelipase capsules was added to 20 mL of 8.4% sodium bicarbonate solution to dissolve the enteric coating and liberate the enzymes into solution. In addition to visual observation, the pH, relative particle count, and osmolality of each admixture were assessed immediately and 5, 10, 20, and 30 minutes after admixture preparation. The only dose of Creon that was completely dissolved at 30 minutes was the 24,000 lipase unit dose. None of the doses of Pancreaze and only the lowest dose (23,000 lipase units) of Ultresa were completely dissolved at 30 minutes. However, Zenpep doses of 20,000 and 40,000 lipase units were completely dissolved 30 minutes after preparation. Higher doses of each pancrelipase product did not completely dissolve. The baseline pH of the solvent decreased slightly at the first few time points after pancrelipase was added. The relative particle count increased over time and with increasing doses. The osmolality of the mixtures varied by pancrelipase product. The dissolution of enteric coated granules in sodium bicarbonate varied with the pancrelipase product and dose. Zenpep 40,000 lipase units was found to most efficiently dissolve in sodium bicarbonate, possibly due to the consistent size of the product's granules and visibly thinner and uniform enteric coating. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Engineered maize as a source of astaxanthin: processing and application as fish feed.

PubMed

Breitenbach, Jürgen; Nogueira, Marilise; Farré, Gemma; Zhu, Changfu; Capell, Teresa; Christou, Paul; Fleck, Gunther; Focken, Ulfert; Fraser, Paul D; Sandmann, Gerhard

2016-12-01

Astaxanthin from a transgenic maize line was evaluated as feed supplement source conferring effective pigmentation of rainbow trout flesh. An extraction procedure using ethanol together with the addition of vegetal oil was established. This resulted in an oily astaxanthin preparation which was not sufficiently concentrated for direct application to the feed. Therefore, a concentration process involving multiple phase partitioning steps was implemented to remove 90 % of the oil. The resulting astaxanthin raw material contained non-esterified astaxanthin with 12 % 4-keto zeaxanthin and 2 % zeaxanthin as additional carotenoids. Isomeric analysis confirmed the exclusive presence of the 3S, 3'S astaxanthin enantiomer. The geometrical isomers were 89 % all-E, 8 % 13-Z and 3 % 9-Z. The incorporation of the oily astaxanthin preparation into trout feed was performed to deliver 7 mg/kg astaxanthin in the final feed formulation for the first 3.5 weeks and 72 mg/kg for the final 3.5 weeks of the feeding trial. The resulting pigmentation of the trout fillets was determined by hue values with a colour meter and further confirmed by astaxanthin quantification. Pigmentation properties of the maize-produced natural astaxanthin incorporated to 3.5 µg/g dw in the trout fillet resembles that of chemically synthesized astaxanthin. By comparing the relative carotenoid compositions in feed, flesh and feces, a preferential uptake of zeaxanthin and 4-keto zeaxanthin over astaxanthin was observed.

A qualitative study of the infant feeding beliefs and behaviours of mothers with low educational attainment.

PubMed

Russell, Catherine Georgina; Taki, Sarah; Azadi, Leva; Campbell, Karen J; Laws, Rachel; Elliott, Rosalind; Denney-Wilson, Elizabeth

2016-05-21

Infancy is an important period for the promotion of healthy eating, diet and weight. However little is known about how best to engage caregivers of infants in healthy eating programs. This is particularly true for caregivers, infants and children from socioeconomically disadvantaged backgrounds who experience greater rates of overweight and obesity yet are more challenging to reach in health programs. Behaviour change interventions targeting parent-infant feeding interactions are more likely to be effective if assumptions about what needs to change for the target behaviours to occur are identified. As such we explored the precursors of key obesity promoting infant feeding practices in mothers with low educational attainment. One-on-one semi-structured telephone interviews were developed around the Capability Opportunity Motivation Behaviour (COM-B) framework and applied to parental feeding practices associated with infant excess or healthy weight gain. The target behaviours and their competing alternatives were (a) initiating breastfeeding/formula feeding, (b) prolonging breastfeeding/replacing breast milk with formula, (c) best practice formula preparation/sub-optimal formula preparation, (d) delaying the introduction of solid foods until around six months of age/introducing solids earlier than four months of age, and (e) introducing healthy first foods/introducing unhealthy first foods, and (f) feeding to appetite/use of non-nutritive (i.e., feeding for reasons other than hunger) feeding. The participants' education level was used as the indicator of socioeconomic disadvantage. Two researchers independently undertook thematic analysis. Participants were 29 mothers of infants aged 2-11 months. The COM-B elements of Social and Environmental Opportunity, Psychological Capability, and Reflective Motivation were the key elements identified as determinants of a mother's likelihood to adopt the healthy target behaviours although the relative importance of each of the COM-B factors varied with each of the target feeding behaviours. Interventions targeting healthy infant feeding practices should be tailored to the unique factors that may influence mothers' various feeding practices, taking into account motivational and social influences.

GMP-Compliant Expansion of Clinical-Grade Human Mesenchymal Stromal/Stem Cells Using a Closed Hollow Fiber Bioreactor.

PubMed

Barckhausen, Christina; Rice, Brent; Baila, Stefano; Sensebé, Luc; Schrezenmeier, Hubert; Nold, Philipp; Hackstein, Holger; Rojewski, Markus Thomas

2016-01-01

This chapter describes a method for GMP-compliant expansion of human mesenchymal stromal/stem cells (hMSC) from bone marrow aspirates, using the Quantum(®) Cell Expansion System from Terumo BCT. The Quantum system is a functionally closed, automated hollow fiber bioreactor system designed to reproducibly grow cells in either GMP or research laboratory environments. The chapter includes protocols for preparation of media, setup of the Quantum system, coating of the hollow fiber bioreactor, as well as loading, feeding, and harvesting of cells. We suggest a panel of quality controls for the starting material, the interim product, as well as the final product.

Packaging for Food Service

NASA Technical Reports Server (NTRS)

Stilwell, E. J.

1985-01-01

Most of the key areas of concern in packaging the three principle food forms for the space station were covered. It can be generally concluded that there are no significant voids in packaging materials availability or in current packaging technology. However, it must also be concluded that the process by which packaging decisions are made for the space station feeding program will be very synergistic. Packaging selection will depend heavily on the preparation mechanics, the preferred presentation and the achievable disposal systems. It will be important that packaging be considered as an integral part of each decision as these systems are developed.

Corn fiber hulls as a food additive or animal feed

DOEpatents

Abbas, Charles; Beery, Kyle E.; Cecava, Michael J.; Doane, Perry H.

2010-12-21

The present invention provides a novel animal feed or food additive that may be made from thermochemically hydrolyzed, solvent-extracted corn fiber hulls. The animal feed or food additive may be made, for instance, by thermochemically treating corn fiber hulls to hydrolyze and solubilize the hemicellulose and starch present in the corn fiber hulls to oligosaccharides. The residue may be extracted with a solvent to separate the oil from the corn fiber, leaving a solid residue that may be prepared, for instance by aggolmerating, and sold as a food additive or an animal feed.

Core-Shell in Liquid Chromatography: Application for Determining Sulphonamides in Feed and Meat Using Conventional Chromatographic Systems

PubMed Central

Armentano, Antonio; Summa, Simona; Magro, Sonia Lo; D’Antini, Pasquale; Palermo, Carmen; Muscarella, Marilena

2016-01-01

A C18 column packed with core-shell particles was used for the chromatographic separation of sulphonamides in feed and meat by a conventional high performance liquid chromatography system coupled with a diode array detector. Two analytical methods, already used in our laboratory, have been modified without any changes in the extraction and clean-up steps and in the liquid chromatography instrumentation. Chromatographic conditions applied on a traditional 5-µm column have been optimized on a column packed with 2.6 µm core-shell particles. A binary mobile phase [acetate buffer solution at pH 4.50 and a mixture of methanol acetonitrile 50: 50 (v/v)] was employed in gradient mode at the flow rate of 1.2 mL with an injection volume of 6 µL. These chromatographic conditions allow the separation of 13 sulphonamides with an entire run of 13 minutes. Preliminary studies have been carried out comparing blanks and spiked samples of feed and meat. A good resolution and the absence of interferences were achieved in chromatograms for both matrices. Since no change was made to the sample preparation, the optimized method does not require a complete revalidation and can be used to make routine analysis faster. PMID:28217560

KSC-08pd0005

NASA Image and Video Library

2008-01-04

KENNEDY SPACE CENTER, FLA. -- At a lab at NASA's Kennedy Space Center, Bob Arp, an aerospace technician with the United Launch Alliance, inserts a wire from an electrical harness onto the pin of a replacement feed-through connector during preparations to solder the pins to the socket of the connector. The connector will be installed in the external fuel tank for space shuttle Atlantis' STS-122 mission. The technician performed this exacting task on the Centaur upper stage for Atlas and Titan launches in 1994 and was specifically chosen for the task. Soldering the connector pins and sockets together addresses the most likely cause of a problem in the engine cutoff sensor system, or ECO system. Some of the tank's ECO sensors failed during propellant tanking for launch attempts on Dec. 6 and Dec. 9. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The feed-through connector passes the wires from the inside of the tank to the outside. After the soldering is completed and the connector is reinstalled, shuttle program managers will decide on how to proceed. The launch date for mission STS-122 is under review. Photo credit: NASA/Kim Shiflett

KSC-08pd0002

NASA Image and Video Library

2008-01-04

KENNEDY SPACE CENTER, FLA. -- At a lab at NASA's Kennedy Space Center, Kevin Wyckoff, an aerospace technician with the United Launch Alliance, examines an electrical wiring harness. The harness will be inserted into a replacement feed-through connector during preparations to solder the pins to the socket of the connector. The connector will later be installed in the external fuel tank for space shuttle Atlantis' STS-122 mission. The technician performed this exacting task on the Centaur upper stage for Atlas and Titan launches in 1994 and was specifically chosen for the task. Soldering the connector pins and sockets together addresses the most likely cause of a problem in the engine cutoff sensor system, or ECO system. Some of the tank's ECO sensors failed during propellant tanking for launch attempts on Dec. 6 and Dec. 9. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The feed-through connector passes the wires from the inside of the tank to the outside. After the soldering is completed and the connector is reinstalled, shuttle program managers will decide on how to proceed. The launch date for mission STS-122 is under review. Photo credit: NASA/Kim Shiflett

Preparation of ormetoprim-sulfadimethoxine-medicated discs for disc diffusion assay

USDA-ARS?s Scientific Manuscript database

Romet ( a blend of ormetoprim and sulfadimethoxine) is a type A medicated article for the manufacture of medicated feed in the catfish industry. Recently, the commercial manufacture of ormetoprim-sulfadimethoxine susceptibility discs was discontinued. Ormetoprim-sulfadimethoxine discs were prepare...

[Encouragement and protection of breast-feeding: conoscitive study].

PubMed

Di Labio, Luisa; Pane, Concettina; Cicolini, Giancarlo

2011-01-01

The factors associated with exclusive breast-feeding in a Naples health district were studied in October 2008 in the period between the first and second vaccinations (neonates aged between 60 and 120 days) . Questions regarded both the mother and the child and the answers were collected in a database and compared with other methods of nutrition or mixed methods. Statistical analysis was performed using multivariate logistic regression. Results showed that only 38.5% of the mothers interviewed practiced breast-feeding alone while 20% did mixed feeding and 41.5% preferred artificial feeding. The variables negatively related to breast-feeding were: breast problems, older-aged mothers, Cesarean section, first experience of breast-feeding, lack of rooming-in and/or prenatal preparative courses. Positively associated variables were: higher level of education of the mother, higher level of information regarding the advantages of breast-feeding. The conclusions of this study confirm those of previous studies regarding the relationship between exclusive breast-feeding and biological and social factors.

Responses of non-starch polysaccharide-degrading enzymes on digestibility and performance of growing pigs fed a diet based on corn, soya bean meal and Chinese double-low rapeseed meal.

PubMed

Fang, Z F; Peng, J; Liu, Z L; Liu, Y G

2007-08-01

This study was conducted to investigate the effect of two distinct enzyme preparations on nutrients' digestibility and growth performance of growing pigs fed diets based on corn, soya bean meal and Chinese double-low rapeseed meal (DLRM). The two enzyme preparations were Enzyme R, a preparation extracted from fermentation of a non-GMO fungus Penicillum funiculosum, developed for multi-grain and multi-animal species; and Enzyme P, a xylanase preparation from Trichoderma longibrachiatum, for pigs fed corn-based diets only. Both enzymes were tested at 0, 0.25 and 0.50 g/kg feed using 70 crossbred male pigs (Large Yorkshire x Landrace) in five dietary treatments and seven replicates in each treatment, for growth period from 27 to 68 kg live weight in 49 days. Results showed that the supplementation of both enzymes (1) increased total-tract digestibility of dietary energy from 77.5% (control) to 81.4% (Enzyme R, p < 0.05) and 81.9% (Enzyme P, p < 0.05); of neutral detergent fibre from 41.0% (control) to 57.8% (Enzyme R, p < 0.05) and 60.0% (Enzyme P, p < 0.05); (2) improved average daily gain from 786 g (control) to 829 g (Enzyme R, p < 0.05) and 846 g (Enzyme P, p < 0.05); and numerical increases in feed intake from 1.96 kg/pig/day (control) to 2.01 (Enzyme R) and 2.00 (p > 0.05) and feed conversion ratio from 2.50 (control) to 2.42 (Enzyme R) and 2.36 (Enzyme P, p < 0.05); (3) there was a dose response but no significant differences were observed in enzyme efficacy between the two enzyme preparations. The present study demonstrated beneficial effects of applying xylanase-based enzymes to improve feeding values of pig diets based on corn, soya bean meal and DLRM.

Are WHO/UNAIDS/UNICEF-recommended replacement milks for infants of HIV-infected mothers appropriate in the South African context?

PubMed Central

Papathakis, P. C.; Rollins, N. C.

2004-01-01

OBJECTIVE: Little is known about the nutritional adequacy and feasibility of breastmilk replacement options recommended by WHO/UNAIDS/UNICEF. The study aim was to explore suitability of the 2001 feeding recommendations for infants of HIV-infected mothers for a rural region in KwaZulu Natal, South Africa specifically with respect to adequacy of micronutrients and essential fatty acids, cost, and preparation times of replacement milks. METHODS: Nutritional adequacy, cost, and preparation time of home-prepared replacement milks containing powdered full cream milk (PM) and fresh full cream milk (FM) and different micronutrient supplements (2 g UNICEF micronutrient sachet, government supplement routinely available in district public health clinics, and best available liquid paediatric supplement found in local pharmacies) were compared. Costs of locally available ingredients for replacement milk were used to calculate monthly costs for infants aged one, three, and six months. Total monthly costs of ingredients of commercial and home-prepared replacement milks were compared with each other and the average monthly income of domestic or shop workers. Time needed to prepare one feed of replacement milk was simulated. FINDINGS: When mixed with water, sugar, and each micronutrient supplement, PM and FM provided <50% of estimated required amounts for vitamins E and C, folic acid, iodine, and selenium and <75% for zinc and pantothenic acid. PM and FM made with UNICEF micronutrient sachets provided 30% adequate intake for niacin. FM prepared with any micronutrient supplement provided no more than 32% vitamin D. All PMs provided more than adequate amounts of vitamin D. Compared with the commercial formula, PM and FM provided 8-60% of vitamins A, E, and C, folic acid, manganese, zinc, and iodine. Preparations of PM and FM provided 11% minimum recommended linoleic acid and 67% minimum recommended alpha-linolenic acid per 450 ml mixture. It took 21-25 minutes to optimally prepare 120 ml of replacement feed from PM or commercial infant formula and 30-35 minutes for the fresh milk preparation. PM or FM cost approximately 20% of monthly income averaged over the first six months of life; commercial formula cost approximately 32%. CONCLUSION: No home-prepared replacement milks in South Africa meet all estimated micronutrient and essential fatty acid requirements of infants aged <6 months. Commercial infant formula is the only replacement milk that meets all nutritional needs. Revisions of WHO/UNAIDS/UNICEF HIV and infant feeding course replacement milk options are needed. If replacement milks are to provide total nutrition, preparations should include vegetable oils, such as soybean oil, as a source of linoleic and alpha-linolenic acids, and additional vitamins and minerals. PMID:15112004

Influence of infant feeding patterns over the first year of life on growth from birth to 5 years.

PubMed

Betoko, A; Lioret, S; Heude, B; Hankard, R; Carles, S; Forhan, A; Regnault, N; Botton, J; Charles, M A; de Lauzon-Guillain, B

2017-08-01

As early-life feeding experiences may influence later health, we aimed to examine relations between feeding patterns over the first year of life and child's growth in the first 5 years of life. Our analysis included 1022 children from the EDEN mother-child cohort. Three feeding patterns were previously identified, i.e. 'Later dairy products introduction and use of ready-prepared baby foods' (pattern-1), 'Long breastfeeding, later main meal food introduction and use of home-made foods' (pattern-2) and 'Use of ready-prepared adult foods' (pattern-3). Associations between the feeding patterns and growth [weight, height and body mass index {BMI}] were analysed by multivariable linear regressions. Anthropometric changes were assessed by the final value adjusted for the initial value. Even though infant feeding patterns were not related to anthropometric measurements at 1, 3 and 5 years, high scores on pattern-1 were associated with higher 1-3 years weight and height changes. High scores on pattern-2 were related to lower 0-1 year weight and height changes, higher 1-5 years weight and height changes but not to BMI changes, after controlling for a wide range of potential confounding variables including parental BMI. Scores on pattern-3 were not significantly related to growth. Additional adjustment for breastfeeding duration reduced the strength of the associations between pattern-2 and growth but not those between pattern-1 and height growth. Our findings emphasize the relevance of considering infant feeding patterns including breastfeeding duration, age of complementary foods introduction as well as type of foods used when examining effects of early infant feeding practices on later health. © 2017 World Obesity Federation. © 2017 World Obesity Federation.

Advanced nutrient root-feeding system for conveyor-type cylindrical plant growth facilities for microgravity

NASA Astrophysics Data System (ADS)

Berkovich, Yu. A.; Krivobok, N. M.; Krivobok, A. S.; Smolyanina, S. O.

2016-02-01

A compact and reliable automatic method for plant nutrition supply is needed to monitor and control space-based plant production systems. The authors of this study have designed a nutrient root-feeding system that minimizes and regulates nutrient and water supply without loss of crop yields in a space greenhouse. The system involves an ion-exchange fibrous artificial soil (AS) BIONA-V3TM as the root-inhabited medium; a pack with slow-release fertilizer as the main source of nitrogen, phosphorus, and potassium; and a cartridge with granular mineral-rich ionite (GMRI) as a source of calcium, magnesium, sulfur, and iron. A controller equipped with an electrical conductivity meter controls the solution flow and concentration of the solution in the mixing tank at specified values. Experiments showed that the fibrous AS-stabilized pH of the substrate solution within the range of 6.0-6.6 is favorable to the majority of crops. The experimental data confirmed that this technique allowed solution preparation for crops in space greenhouses by means of pumping water through the cartridge and minimization of the AS stock onboard the space vehicle.

Catalytic distillation process

DOEpatents

Smith, Jr., Lawrence A.

1982-01-01

A method for conducting chemical reactions and fractionation of the reaction mixture comprising feeding reactants to a distillation column reactor into a feed zone and concurrently contacting the reactants with a fixed bed catalytic packing to concurrently carry out the reaction and fractionate the reaction mixture. For example, a method for preparing methyl tertiary butyl ether in high purity from a mixed feed stream of isobutene and normal butene comprising feeding the mixed feed stream to a distillation column reactor into a feed zone at the lower end of a distillation reaction zone, and methanol into the upper end of said distillation reaction zone, which is packed with a properly supported cationic ion exchange resin, contacting the C.sub.4 feed and methanol with the catalytic distillation packing to react methanol and isobutene, and concurrently fractionating the ether from the column below the catalytic zone and removing normal butene overhead above the catalytic zone.

Catalytic distillation process

DOEpatents

Smith, L.A. Jr.

1982-06-22

A method is described for conducting chemical reactions and fractionation of the reaction mixture comprising feeding reactants to a distillation column reactor into a feed zone and concurrently contacting the reactants with a fixed bed catalytic packing to concurrently carry out the reaction and fractionate the reaction mixture. For example, a method for preparing methyl tertiary butyl ether in high purity from a mixed feed stream of isobutene and normal butene comprising feeding the mixed feed stream to a distillation column reactor into a feed zone at the lower end of a distillation reaction zone, and methanol into the upper end of said distillation reaction zone, which is packed with a properly supported cationic ion exchange resin, contacting the C[sub 4] feed and methanol with the catalytic distillation packing to react methanol and isobutene, and concurrently fractionating the ether from the column below the catalytic zone and removing normal butene overhead above the catalytic zone.

Preparation of ormetoprim sulfadimethoxine medicated discs for disc diffusion assay

USDA-ARS?s Scientific Manuscript database

Romet (a blend of ormetoprim and sulfadimethoxine) is a typeA medicated article for the manufacture of medicated feed in the catfish industry. Recently, the commercial manufacture of ormetoprim–sulfadimethoxine susceptibility discs was discontinued. Ormetoprim–sulfadimethoxine discs were prepared at...

Freshwater catfish jundiá (Rhamdia quelen) larvae are prepared to digest inert feed at the exogenous feeding onset: physiological and histological assessments.

PubMed

Silveira, Jenniffer; Silva, Carlos Peres; Cargnin-Ferreira, Eduardo; Alexandre, Daniel; Elias, Mariele Abádia; Fracalossi, Débora Machado

2013-12-01

This study assessed the morphological development of jundiá larvae's digestive system and digestive proteolytic activity. Specific serine proteinases activities varied over time, with the highest peak at 12 h after hatching (AH), which corresponded to 296.38 ± 84.20 mU mg⁻¹ for trypsin and 315.45 ± 42.16 mU mg⁻¹ for chymotrypsin. Specific aspartic proteinases activities increased up to the start of weaning, oscillated during that phase, but showed a consistent increase after that, resulting in the highest specific activity at 252 h AH (7.88 ± 0.68 mU mg⁻¹). Gel assays showed different molecular forms, especially of serine proteinases. Histology showed the gastrointestinal tract development onset at 0 h AH and open mouth at 4 h AH. At 16 h AH, the following differentiation of the digestive tract was evident: oropharyngeal cavity, esophagus, liver, pancreas, stomach, and intestine. At 40 h AH, zymogen granules in the pancreas were observed, and at 48 h AH, mucus in the digestive tract and gastric glands in the stomach. Findings indicate that jundiá has a functional stomach before the end of vitelline reserves. Therefore, jundiá larvae are probably capable to digest inert feed at the exogenous feeding onset.

Plasma synthesis of lithium based intercalation powders for solid polymer electrolyte batteries

DOEpatents

Kong, Peter C [Idaho Falls, ID; Pink, Robert J [Pocatello, ID; Nelson, Lee O [Idaho Falls, ID

2005-01-04

The invention relates to a process for preparing lithium intercalation compounds by plasma reaction comprising the steps of: forming a feed solution by mixing lithium nitrate or lithium hydroxide or lithium oxide and the required metal nitrate or metal hydroxide or metal oxide and between 10-50% alcohol by weight; mixing the feed solution with O.sub.2 gas wherein the O.sub.2 gas atomizes the feed solution into fine reactant droplets, inserting the atomized feed solution into a plasma reactor to form an intercalation powder; and if desired, heating the resulting powder to from a very pure single phase product.

Incidence of Listeria spp. in Dairy Cows Feed and Raw Milk in Latvia

PubMed Central

Konosonoka, I. H.; Jemeljanovs, A.; Osmane, B.; Ikauniece, D.; Gulbe, G.

2012-01-01

Feed is a risk factor for poisoning the farm environment thus also fresh milk with pathogenic microorganisms of Listeria genus species. Listeria ivanovii, Listeria innocua, and Listeria seeligeri were isolated from 9.2%, but Listeria monocytogenes from 20.0% of feed samples. Most often different fodders (9.3%) and silage (4.7%) were contaminated with Listeria monocytogenes. Listeria genus species were isolated more often from feed prepared and used in organic dairy farm than from that used in conventional dairy farm, correspondingly 44.4% and 18.3%. No Listeria monocytogenes was found in bulk milk samples of organic dairy farm. PMID:23738125

PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

MAY TH

The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revisionmore » includes information on additional feed tanks.« less

Preparation and functional evaluation of antihypertensive polypeptides from rice based on ultrasonic pretreatment

USDA-ARS?s Scientific Manuscript database

Enzymolysis was used for preparation of antihypertensive peptide from rice. Following studies were conducted:ultrasonic pretreatment of substrate protein, ultrafilter of hydrolysate and test of anti-digestive enzyme degradation and one-time feeding of spontaneously hypertensive rats (SHR) of antihyp...

Feeding the Preschool Child: Documents Issued by PAG Ad Hoc Working Group Meetings (1969-1975).

ERIC Educational Resources Information Center

United Nations Industrial Development Organization, Vienna (Austria).

This document contains six papers prepared between 1969 and 1975 by the Protein-Calorie Advisory Group (PAG) of the United Nations on topics related to the feeding of preschool children in underdeveloped countries. Among the topics covered: (1) nutrition in utero; (2) nutritional aspects of breastfeeding; (3) infant mortality rates as indicators…

Drug Administration via Enteral Feeding Tube in Residential Care Facilities for Individuals with Intellectual Disability: A Focus Group Study on Guideline Implementation

ERIC Educational Resources Information Center

Joos, Elke; Van Tongelen, Inge; Wijnants, Karen; Mehuys, Els; Van Bocxlaer, Jan; Remon, Jean Paul; Grypdonck, Maria; Van Winckel, Myriam; Boussery, Koen

2016-01-01

People with profound intellectual disabilities often receive medication through enteral feeding tube (EFT). In a previous study, we found that current guidelines concerning medication preparation and administration through EFT are often not followed in residential care facilities (RCFs) for individuals with intellectual disabilities. The present…

Grain, Feed, Seed, and Farm Supply Technology. A Suggested 2-Year Post High School Curriculum.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

The increasing need for skilled agricultural technicians for the grain, feed, seed, and farm supply industry resulted in preparation of this suggested curriculum guide to aid in planning, developing, and evaluating post-high school programs. The guide includes: (1) suggested course outlines with examples of texts and references, (2) sequence of…

Evaluation of coal feed systems being developed by the Energy Research and Development administration

NASA Technical Reports Server (NTRS)

Phen, R. L.; Luckow, W. K.; Mattson, L.; Otth, D.; Tsou, P.

1977-01-01

Development criteria and recommendations for coal feed system selections that include supporting data are presented. Considered are the areas of coal feed coasts, coal feed system reliability, and the interaction of the feed system with the conversion process.

Design of a novel automated methanol feed system for pilot-scale fermentation of Pichia pastoris.

PubMed

Hamaker, Kent H; Johnson, Daniel C; Bellucci, Joseph J; Apgar, Kristie R; Soslow, Sherry; Gercke, John C; Menzo, Darrin J; Ton, Christopher

2011-01-01

Large-scale fermentation of Pichia pastoris requires a large volume of methanol feed during the induction phase. However, a large volume of methanol feed is difficult to use in the processing suite because of the inconvenience of constant monitoring, manual manipulation steps, and fire and explosion hazards. To optimize and improve safety of the methanol feed process, a novel automated methanol feed system has been designed and implemented for industrial fermentation of P. pastoris. Details of the design of the methanol feed system are described. The main goals of the design were to automate the methanol feed process and to minimize the hazardous risks associated with storing and handling large quantities of methanol in the processing area. The methanol feed system is composed of two main components: a bulk feed (BF) system and up to three portable process feed (PF) systems. The BF system automatically delivers methanol from a central location to the portable PF system. The PF system provides precise flow control of linear, step, or exponential feed of methanol to the fermenter. Pilot-scale fermentations with linear and exponential methanol feeds were conducted using two Mut(+) (methanol utilization plus) strains, one expressing a recombinant therapeutic protein and the other a monoclonal antibody. Results show that the methanol feed system is accurate, safe, and efficient. The feed rates for both linear and exponential feed methods were within ± 5% of the set points, and the total amount of methanol fed was within 1% of the targeted volume. Copyright © 2011 American Institute of Chemical Engineers (AIChE).

Compounded Apixaban Suspensions for Enteral Feeding Tubes.

PubMed

Caraballo, Maria L; Donmez, Seda; Nathan, Kobi; Zhao, Fang

2017-07-01

Objective: There is limited information on compounded apixaban formulations for administration via enteral feeding tubes. This study was designed to identify a suitable apixaban suspension formulation that is easy to prepare in a pharmacy setting, is compatible with commonly used feeding tubes, and has a beyond-use date of 7 days. Methods: Apixaban suspensions were prepared from commercially available 5-mg Eliquis tablets. Several vehicles and compounding methods were screened for ease of preparation, dosage accuracy, and tube compatibility. Two tubing types, polyurethane and polyvinyl chloride, with varying lengths and diameters, were included in the study. They were mounted on a peg board during evaluation to mimic the patient body position. A 7-day stability study of the selected formulation was also conducted. Results: Vehicles containing 40% to 60% Ora-Plus in water all exhibited satisfactory flowability through the tubes. The mortar/pestle compounding method was found to produce more accurate and consistent apixaban suspensions than the pill crusher or crushing syringe method. The selected formulation, 0.25 mg/mL apixaban in 50:50 Ora-Plus:water, was compatible with both tubing types, retaining >98% drug in posttube samples. The stability study also confirmed that this formulation was stable physically and chemically over 7 days of storage at room temperature. Conclusions: A suitable apixaban suspension formulation was identified for administration via enteral feeding tubes. The formulation consisted of 0.25 mg/mL apixaban in 50:50 Ora-Plus:water. The stability study results supported a beyond-use date of 7 days at room temperature.

An Overview of Conventional and Emerging Analytical Methods for the Determination of Mycotoxins

PubMed Central

Cigić, Irena Kralj; Prosen, Helena

2009-01-01

Mycotoxins are a group of compounds produced by various fungi and excreted into the matrices on which they grow, often food intended for human consumption or animal feed. The high toxicity and carcinogenicity of these compounds and their ability to cause various pathological conditions has led to widespread screening of foods and feeds potentially polluted with them. Maximum permissible levels in different matrices have also been established for some toxins. As these are quite low, analytical methods for determination of mycotoxins have to be both sensitive and specific. In addition, an appropriate sample preparation and pre-concentration method is needed to isolate analytes from rather complicated samples. In this article, an overview of methods for analysis and sample preparation published in the last ten years is given for the most often encountered mycotoxins in different samples, mainly in food. Special emphasis is on liquid chromatography with fluorescence and mass spectrometric detection, while in the field of sample preparation various solid-phase extraction approaches are discussed. However, an overview of other analytical and sample preparation methods less often used is also given. Finally, different matrices where mycotoxins have to be determined are discussed with the emphasis on their specific characteristics important for the analysis (human food and beverages, animal feed, biological samples, environmental samples). Various issues important for accurate qualitative and quantitative analyses are critically discussed: sampling and choice of representative sample, sample preparation and possible bias associated with it, specificity of the analytical method and critical evaluation of results. PMID:19333436

Evaluation of Chlorfluazuron Against Subterranean Termites Heterotermes indicola (Isoptera: Rhinotermitidae) in Pakistan.

PubMed

Manzoor, Farkhanda; Pervez, Mahnoor

2016-12-01

Baiting systems have been introduced using slow-acting bait toxicants to provide environment-friendly and target-specific termite management. In the present study, the Exterra termite bait system (USA) with chlorfluazuron, a chitin synthesis inhibitor, as the active ingredient was tested against termite colonies. Ten residential areas of Lahore, infested with subterranean termites were selected for the study. The study period was from 2013 to 2015. In-ground stations were installed at 10 sites and above-ground stations were only installed at four test sites. Requiem termite bait was prepared according to the label instructions. Results showed that the range of termite activity was between 30 and 214 d to first termite activity on underground monitors with a mean of 78.23 ± 6.44. Timeline graphs also show activity of termites and active ingredient placement for each of the stations at each site. As termite feeding activity in the stations increased, there was a decrease in termite activities in wooden structures, followed by cessation of termite feeding and foraging activity noted in the building structures. It was concluded that a termite baiting system in Pakistan has the potential to suppress and reduce termite populations, when foraging termites feed on the active ingredient and share with nest mates through trophallaxis by installing more bait stations and prolonging baiting period. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

76 FR 80261 - National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Prepared...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... specifications and operating instructions, if available, or standard operating procedures must be developed by... manufacturer's specifications and operating instructions, if available, or standard operating procedures must... operating specifications or standard operating procedures developed by the prepared feeds manufacturer be...

Preparation and recrystallization behavior of spray-dried co-amorphous naproxen-indomethacin.

PubMed

Beyer, Andreas; Radi, Lydia; Grohganz, Holger; Löbmann, Korbinian; Rades, Thomas; Leopold, Claudia S

2016-07-01

To improve the dissolution properties and the physical stability of amorphous active pharmaceutical ingredients, small molecule stabilizing agents may be added to prepare co-amorphous systems. The objective of the study was to investigate if spray-drying allows the preparation of co-amorphous drug-drug systems such as naproxen-indomethacin and to examine the influence of the process conditions on the resulting initial sample crystallinity and the recrystallization behavior of the drug(s). For this purpose, the process parameters inlet temperature and pump feed rate were varied according to a 2(2) factorial design and the obtained samples were analyzed with X-ray powder diffractometry and Fourier-transformed infrared spectroscopy. Evaluation of the data revealed that the preparation of fully amorphous samples could be achieved depending on the process conditions. The resulting recrystallization behavior of the samples, such as the total recrystallization rate, the individual recrystallization rates of naproxen and indomethacin as well as the polymorphic form of indomethacin that was formed were influenced by these process conditions. For initially amorphous samples, it was found that naproxen and indomethacin recrystallized almost simultaneously, which supports the theory of formation of drug-drug heterodimers in the co-amorphous phase. Copyright © 2016 Elsevier B.V. All rights reserved.

Material handling systems for the fluidized-bed combustion boiler at Rivesville, West Virginia

NASA Technical Reports Server (NTRS)

Branam, J. G.; Rosborough, W. W.

1977-01-01

The 300,000 lbs/hr steam capacity multicell fluidized-bed boiler (MFB) utilizes complex material handling systems. The material handling systems can be divided into the following areas: (1) coal preparation; transfer and delivery, (2) limestone handling system, (3) fly-ash removal and (4) bed material handling system. Each of the above systems are described in detail and some of the potential problem areas are discussed. A major potential problem that exists is the coal drying system. The coal dryer is designed to use 600 F preheated combustion air as drying medium and the dryer effluent is designed to enter a hot electrostatic precipitator (730 F) after passage through a cyclone. Other problem areas to be discussed include the steam generator coal and limestone feed system which may have operating difficulties with wet coal and/or coal fines.

Important determinants of newborn health: postpartum depression, teen parenting, and breast-feeding.

PubMed

McPeak, Katie E; Sandrock, Deborah; Spector, Nancy D; Pattishall, Amy E

2015-02-01

The present article addresses recent research related to three important determinants of newborn health: postpartum depression, teenage parents and their offspring, and breast-feeding. Postpartum depression can impact the entire family unit, and fathers may be affected more than previously recognized. Teenage mothers and their infants are at risk of a number of poor physical and mental health outcomes. New research continues to support the benefits of breast-feeding infants, and hospitals have adopted policies to improve breast-feeding rates. Recognizing both maternal and paternal depression during outpatient visits is key to family well-being, as well as to infant development and attachment. Pediatric providers should address the unique emotional, socioeconomic, educational, and health needs of teen mothers. Hospital implementation of evidence-based policies may increase the number of mothers who are successful in establishing breast-feeding, and pediatric healthcare providers should be prepared to support mothers of breast-feeding infants.

Chemical and biotechnological processing of collagen-containing raw materials into functional components of feed suitable for production of high-quality meat from farm animals

NASA Astrophysics Data System (ADS)

Baburina, M. I.; Ivankin, A. N.; Stanovova, I. A.

2017-09-01

The process of chemical biotechnological processing of collagen-containing raw materials into functional components of feeds for effective pig rearing was studied. Protein components of feeds were obtained as a result of hydrolysis in the presence of lactic acid of the animal collagen from secondary raw materials, which comprised subcutaneous collagen (cuticle), skin and veined mass with tendons from cattle. For comparison, a method is described for preparing protein components of feeds by cultivating Lactobacillus plantarum. Analysis of the kinetic data of the conversion of a high-molecular collagen protein to an aminolyte polypeptide mixture showed the advantage of microbiological synthesis in obtaining a protein for feeds. Feed formulations have been developed to include the components obtained, and which result in high quality pork suitable for the production of quality meat products.

Ixodes scapularis Tick Saliva Proteins Sequentially Secreted Every 24 h during Blood Feeding

PubMed Central

Pinto, Antônio F. M.; Moresco, James; Yates, John R.; da Silva Vaz, Itabajara; Mulenga, Albert

2016-01-01

Ixodes scapularis is the most medically important tick species and transmits five of the 14 reportable human tick borne disease (TBD) agents in the USA. This study describes LC-MS/MS identification of 582 tick- and 83 rabbit proteins in saliva of I. scapularis ticks that fed for 24, 48, 72, 96, and 120 h, as well as engorged but not detached (BD), and spontaneously detached (SD). The 582 tick proteins include proteases (5.7%), protease inhibitors (7.4%), unknown function proteins (22%), immunity/antimicrobial (2.6%), lipocalin (3.1%), heme/iron binding (2.6%), extracellular matrix/ cell adhesion (2.2%), oxidant metabolism/ detoxification (6%), transporter/ receptor related (3.2%), cytoskeletal (5.5%), and housekeeping-like (39.7%). Notable observations include: (i) tick saliva proteins of unknown function accounting for >33% of total protein content, (ii) 79% of proteases are metalloproteases, (iii) 13% (76/582) of proteins in this study were found in saliva of other tick species and, (iv) ticks apparently selectively inject functionally similar but unique proteins every 24 h, which we speculate is the tick's antigenic variation equivalent strategy to protect important tick feeding functions from host immune system. The host immune responses to proteins present in 24 h I. scapularis saliva will not be effective at later feeding stages. Rabbit proteins identified in our study suggest the tick's strategic use of host proteins to modulate the feeding site. Notably fibrinogen, which is central to blood clotting and wound healing, was detected in high abundance in BD and SD saliva, when the tick is preparing to terminate feeding and detach from the host. A remarkable tick adaptation is that the feeding lesion is completely healed when the tick detaches from the host. Does the tick concentrate fibrinogen at the feeding site to aide in promoting healing of the feeding lesion? Overall, these data provide broad insight into molecular mechanisms regulating different tick feeding phases. These data set the foundation for in depth I. scapularis tick feeding physiology and TBD transmission studies. PMID:26751078

Concept of a self-pressurized feed system for liquid rocket engines and its fundamental experiment results

NASA Astrophysics Data System (ADS)

Matsumoto, Jun; Okaya, Shunichi; Igoh, Hiroshi; Kawaguchi, Junichiro

2017-04-01

A new propellant feed system referred to as a self-pressurized feed system is proposed for liquid rocket engines. The self-pressurized feed system is a type of gas-pressure feed system; however, the pressurization source is retained in the liquid state to reduce tank volume. The liquid pressurization source is heated and gasified using heat exchange from the hot propellant using a regenerative cooling strategy. The liquid pressurization source is raised to critical pressure by a pressure booster referred to as a charger in order to avoid boiling and improve the heat exchange efficiency. The charger is driven by a part of the generated pressurization gas using a closed-loop self-pressurized feed system. The purpose of this study is to propose a propellant feed system that is lighter and simpler than traditional gas pressure feed systems. The proposed system can be applied to all liquid rocket engines that use the regenerative cooling strategy. The concept and mathematical models of the self-pressurized feed system are presented first. Experiment results for verification are then shown and compared with the mathematical models.

Preparation and characterization of superfine ammonium perchlorate (AP) crystals through ceramic membrane anti-solvent crystallization

NASA Astrophysics Data System (ADS)

Ma, Zhenye; Li, Cheng; Wu, Rujun; Chen, Rizhi; Gu, Zhenggui

2009-10-01

In this paper, a novel ceramic membrane anti-solvent crystallization (CMASC) method was proposed for the safe and rapid preparation ammonium perchlorate (AP) crystals, in which the acetone and ethyl acetate were chosen as solvent and anti-solvent, respectively. Comparing with the conventional liquid anti-solvent crystallization (LASC), CMASC which successfully introduces ceramic membrane with regular pore structure to the LASC as feeding medium, is favorable to control the rate of feeding rate and, therefore, to obtain size and morphology controllable AP. Several kinds of micro-sized AP particles with different morphology were obtained including polyhedral-like, quadrate-like to rod-like. The effect of processing parameters on the crystal size and shape of AP crystals such as volume ratio of anti-solvent to solvent, feeding pressure and crystallization temperature were investigated. It is found that higher volume ratio of anti-solvent to solvent, higher feeding pressure and higher temperature result in smaller particle size. Scaning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the resulting AP crystals. The nucleation and growth kinetic of the resulting AP crystals were also discussed.

76 FR 80314 - National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Prepared...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... operating instructions, if available, or standard operating procedures must be developed by the facility... operating instructions, if available, or standard operating procedures must be developed by the facility... standard operating procedures developed by the prepared feeds manufacturer be required as part of the...

Thermal resistance of Salmonella serovars isolated from raw, frozen chicken nuggets/strips, nugget meat and pelleted broiler feed.

PubMed

Bucher, Oliver; D'Aoust, J-Y; Holley, Richard A

2008-05-31

Raw, frozen chicken nuggets/strips available at retail and prepared at home before consumption have been identified as a significant risk factor in contracting food-borne salmonellosis. Cases of salmonellosis from consumption of these products may be due, in part, to Salmonella strains originating in broiler feed. In this study the thermal resistances of Salmonella strains isolated from chicken nuggets and strips, chicken nugget/strip meat and broiler feed were determined to assess whether they exhibited enhanced thermal resistance. Thermal resistances (D- and z- values) of 7 cocktails (25 isolates, 4 serovars) were determined in commercially prepared irradiation-treated chicken nugget/strip meat blend, and heated in a constant temperature waterbath. The thermal resistances found were lower than those reported for similar strains in the literature. D-values ranged from 6.93 to 0.12 min at 55 and 62 degrees C respectively, with z-values from 4.10 to 5.17 degrees C. Two strains of S. Enteritidis separately isolated from pelleted feed and chicken nugget meat blend, with indistinguishable geno- and phenotypes, had lower (and probably identical) thermal resistances than the other isolates. Results indicated that the strains of Salmonella isolated from raw, frozen chicken nuggets/strips and pelleted broiler feed did not exhibit unusually high thermal resistance, and that normal heating (71 degrees C) prior to consumption should eliminate these organisms from chicken nuggets/strips.

Determination of heat conductivity of waste glass feed and its applicability for modeling the batch-to-glass conversion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hujova, Miroslava; Pokorny, Richard; Klouzek, Jaroslav

The heat conductivity of reacting melter feed affects the heat transfer and conversion process in the cold cap (the reacting feed floating on molten glass). To investigate it, we simulated the feed conditions and morphology in the cold-cap by preparing “fast-dried slurry blocks”, formed by rapidly evaporating water from feed slurry poured onto a 200°C surface. A heat conductivity meter was used to measure heat conductivity of samples cut from the fast-dried slurry blocks, samples of a cold cap retrieved from a laboratory-scale melter, and loose dry powder feed samples. Our study indicates that the heat conductivity of the feedmore » in the cold cap is significantly higher than that of loose dry powder feed, resulting from the feed solidification during the water evaporation from the feed slurry. To assess the heat transfer at higher temperatures when feed turns into foam, we developed a theoretical model that predicts the foam heat conductivity based on morphology data from in-situ X-ray computed tomography. The implications for the mathematical modeling of the cold cap are discussed.« less

Feeding deterrent and growth inhibitory activities of PONNEEM, a newly developed phytopesticidal formulation against Helicoverpa armigera (Hubner)

PubMed Central

Packiam, Soosaimanickam Maria; Baskar, Kathirvelu; Ignacimuthu, Savarimuthu

2014-01-01

Objective To assess the feeding deterrent, growth inhibitory and egg hatchability effects of PONNEEM on Helicoverpa armigera (H. armigera). Methods Five oil formulations were prepared at different ratios to assess the feeding deterrent, growth inhibitory and egg hatchability effects on H. armigera. Results Invariably all the newly formulated phytopesticidal oil formulations showed the feeding deterrent and growth inhibitory activities against H. armigera. The maximum feeding deterrent activity of 88.44% was observed at 15 µL/L concentration of PONNEEM followed by formulation A (74.54%). PONNEEM was found to be effective in growth inhibitory activities and egg hatchability at 10 µL/L concentration. It exhibited statistically significant feeding deterrent activity and growth inhibitory activity compared with all the other treatments. Conclusions PONNEEM was found to be effective phytopesticidal formulation to control the larval stage of H. armigera. This is the first report for the feeding deterrent activity of PONNEEM against H. armigera. This newly formulated phytopesticide was patented in India. PMID:25183105

Water-Chemistry and Its Utility Systems in CCP Power Units (Review)

NASA Astrophysics Data System (ADS)

Larin, B. M.

2018-01-01

Damageability of heat transfer surfaces of waste heat recovery steam generators (HRSG) of combined- cycle plants (CCP) can be reduced due to an increase in the quality of make-up and feed water, the use of phosphate-alkaline or amino compound water chemistry (WC), and improved chemical quality control of the heat carrier and make-up water preparation techniques. Temporary quality standards for the heat medium developed by the All-Russia Thermal Engineering institute (VTI) for CCP power units are presented in comparison with the IAPWS standards; preferences for the choice of a WC type for some power units commissioned in Russia in the first decade of this century are shown; and operational data on the quality of feed, boiler water, and steam for two large CCP-450 and CCP-425 power units are given. The state and prospects for the development of chemical-technological monitoring systems and CCP water treatment plants are noted. Estimability of some CCP diagnostic parameters by measuring specific electric conductivity and pH is shown. An extensive bibliography on this topic is given.

Fuel supply system and method for coal-fired prime mover

DOEpatents

Smith, William C.; Paulson, Leland E.

1995-01-01

A coal-fired gas turbine engine is provided with an on-site coal preparation and engine feeding arrangement. With this arrangement, relatively large dry particles of coal from an on-site coal supply are micro-pulverized and the resulting dry, micron-sized, coal particulates are conveyed by steam or air into the combustion chamber of the engine. Thermal energy introduced into the coal particulates during the micro-pulverizing step is substantially recovered since the so-heated coal particulates are fed directly from the micro-pulverizer into the combustion chamber.

Real-time pair-feeding of animals

NASA Technical Reports Server (NTRS)

Leon, H. A.; Connolly, J. P.; Hitchman, M. J.; Humbert, J. E.

1972-01-01

Automatic pair-feeding system was developed which immediately dispenses same amount of food to control animal as has been consumed by experimental animal that has free access to food. System consists of: master feeding system; slave feeding station; and control mechanism. Technique performs real time pair-feeding without attendant time lag.

Centaur propellant acquisition system

NASA Technical Reports Server (NTRS)

Blatt, M. H.; Aydelott, J. C.

1975-01-01

The desirability of replacing the hydrogen peroxide settling system of the Centaur D-1S with a capillary acquisition system was evaluated. A comprehensive screening was performed to select the most promising capillary device fluid acquisition, thermal conditioning, and fabrication techniques. Refillable start baskets and bypass feed start tanks were selected for detailed design. Critical analysis areas were settling and refilling, start sequence development with an initially dry boost pump, and cooling the fluid delivered to the boost pump to provide the necessary net positive suction head (NPSH). Design drawings were prepared for start basket and start tank concepts for both the liquid oxygen and liquid hydrogen tanks. System comparisons indicated that the start baskets using wicking flow for thermal conditioning, and thermal subcooling for providing boost pump NPSH, are the most desirable systems for future Centaur acquisition system development.

Stennis Space Center Salinity Drifter Project. A Collaborative Project with Hancock High School, Kiln, MS

NASA Technical Reports Server (NTRS)

Kalcic, Maria; Turowski, Mark; Hall, Callie

2010-01-01

Presentation topics include: importance of salinity of coastal waters, habitat switching algorithm, habitat switching module, salinity estimates from Landsat for Sabine Calcasieu Basin, percent of time inundated in 2006, salinity data, prototyping the system, system as packaged for field tests, salinity probe and casing, opening for water flow, cellular antenna used to transmit data, preparing to launch, system is launched in the Pearl River at Stennis Space Center, data are transmitted to Twitter by cell phone modem every 15 minutes, Google spreadsheet I used to import the data from the Twitter feed and to compute salinity (from conductivity) and display charts of salinity and temperature, results are uploaded to NASA's Applied Science and Technology Project Office Webpage.

Advanced nutrient root-feeding system for conveyor-type cylindrical plant growth facilities for microgravity.

PubMed

Berkovich, Yu A; Krivobok, N M; Krivobok, A S; Smolyanina, S O

2016-02-01

A compact and reliable automatic method for plant nutrition supply is needed to monitor and control space-based plant production systems. The authors of this study have designed a nutrient root-feeding system that minimizes and regulates nutrient and water supply without loss of crop yields in a space greenhouse. The system involves an ion-exchange fibrous artificial soil (AS) BIONA-V3(TM) as the root-inhabited medium; a pack with slow-release fertilizer as the main source of nitrogen, phosphorus, and potassium; and a cartridge with granular mineral-rich ionite (GMRI) as a source of calcium, magnesium, sulfur, and iron. A controller equipped with an electrical conductivity meter controls the solution flow and concentration of the solution in the mixing tank at specified values. Experiments showed that the fibrous AS-stabilized pH of the substrate solution within the range of 6.0-6.6 is favorable to the majority of crops. The experimental data confirmed that this technique allowed solution preparation for crops in space greenhouses by means of pumping water through the cartridge and minimization of the AS stock onboard the space vehicle. Copyright © 2015 The Committee on Space Research (COSPAR). Published by Elsevier Ltd. All rights reserved.

Micro-PIXE study of Ag in digestive glands of a nano-Ag fed arthropod ( Porcellio scaber, Isopoda, Crustacea)

NASA Astrophysics Data System (ADS)

Tkalec, Živa Pipan; Drobne, Damjana; Vogel-Mikuš, Katarina; Pongrac, Paula; Regvar, Marjana; Štrus, Jasna; Pelicon, Primož; Vavpetič, Primož; Grlj, Nataša; Remškar, Maja

2011-10-01

Micro-proton induced X-ray emission (micro-PIXE) method was applied to study the micro-localization of silver (Ag) in digestive glands of a terrestrial arthropod (Porcellio scaber) after feeding on silver nanoparticles (nano-Ag) dosed food. The aim of our work was to assess whether feeding on nano-Ag results in the assimilation of silver (Ag) in digestive gland cells. To study micro-localization and elemental distribution of Ag, the animals were fed on food dosed with nanoparticles for 14 days under controlled laboratory conditions. At the end of the feeding exposure, the animals were dissected and digestive glands prepared for micro-PIXE analyses and TEM investigation. The results obtained by micro-PIXE documented high amounts of Ag inside S-cells of the digestive gland epithelium; however, TEM investigation did not show particle aggregates inside digestive gland cells. Also no adverse effect on feeding behavior was recorded what is a measure of toxic effects. We explain the presence of Ag inside the cells as a result of the assimilation of dissoluted Ag ions from ingested nano-Ag particles. Assimilation of excessive amounts of ingested metal ions in S-cells is a well known metal detoxification mechanism in isopods. We discuss the advantages of using micro-PIXE for the micro-localization of elements in biological tissue in studies of interactions between nanoparticles and biological systems.

Evaluation of the correctness of the feed selection based on the analysis of chip's shape

NASA Astrophysics Data System (ADS)

Chodor, Jaroslaw; Kukielka, Leon; Kaldunski, Pawel; Bohdal, Lukasz; Patyk, Radoslaw; Kulakowska, Agnieszka

2018-05-01

For the experiment needs, the own experiment plan was developed. The researches were carried out to determine the effect of variable, small feed on the chip's shape. To provide orthogonal free cutting special specimens were prepared. Obtained chips were divided according to shapes and also scanned using a scanning electron microscope (SEM). Conclusions from the experiments were given.

NOAA's National Weather Service

Science.gov Websites

select the go button to submit request City, St Go Sign-up for Email Alerts RSS Feeds RSS Feeds Warnings prepares the Annual Flood Loss summary for the U.S. Army Corps of Engineers. 2014 2013 2012 2011 2010 2009 Skip Navigation Links weather.gov NOAA logo-Select to go to the NOAA homepage National Oceanic and

The new Israeli feed safety law: challenges in relation to animal and public health.

PubMed

Barel, Shimon; Elad, Dani; Cuneah, Olga; Shimshoni, Jakob A

2017-03-01

The Israeli feed safety legislation, which came to prominence in the early 1970s, has undergone a major change from simple feed safety and quality regulations to a more holistic concept of control of feed safety and quality throughout the whole feed production chain, from farm to the end user table. In February 2014, a new law was approved by the Israeli parliament, namely the Control of Animal Feed Law, which is expected to enter into effect in 2017. The law is intended to regulate the production and marketing of animal feed, guaranteeing the safety and quality of animal products throughout the production chain. The responsibility on the implementation of the new feed law was moved from the Plant Protection Inspection Service to the Veterinary Services and Animal Health. In preparation for the law's implementation, we have characterized the various sources and production lines of feed for farm and domestic animals in Israel and assessed the current feed safety challenges in terms of potential hazards or undesirable substances. Moreover, the basic requirements for feed safety laboratories, which are mandatory for analyzing and testing for potential contaminants, are summarized for each of the contaminants discussed. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

High-efficiency preparation of poly(2-methacryloyloxyethyl phosphorylcholine) grafting layer on poly(ether ether ketone) by photoinduced and self-initiated graft polymerization in an aqueous solution in the presence of inorganic salt additives.

PubMed

Shiojima, Taro; Inoue, Yuuki; Kyomoto, Masayuki; Ishihara, Kazuhiko

2016-08-01

A highly efficient methodology for preparing a poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) layer on the surface of poly(ether ether ketone) (PEEK) was examined by photoinduced and self-initiated graft polymerization. To enhance the polymerization rate, we demonstrated the effects of inorganic salt additives in the feed monomer solution on thickness of grafted PMPC layer. Photoinduced polymerization occurred and the PMPC graft layer was successfully formed on the PEEK surface, regardless of inorganic salt additives. Moreover, it was clearly observed that the addition of inorganic salt enhanced the grafting thickness of PMPC layer on the surface even when the photoirradiation time was shortened. The addition of inorganic salt additives in the feed monomer solution enhanced the polymerization rate of MPC and resulted in thicker PMPC layers. In particular, we evaluated the effect of NaCl concentration and how this affected the polymerization rate and layer thickness. We considered that this phenomenon was due to the hydration of ions in the feed monomer solution and subsequent apparent increase in the MPC concentration. A PMPC layer with over 100-nm-thick, which was prepared by 5-min photoirradiation in 2.5mol/L inorganic salt aqueous solution, showed good wettability and protein adsorption resistance compared to that of untreated PEEK. Hence, we concluded that the addition of NaCl into the MPC feed solution would be a convenient and efficient method for preparing a graft layer on PEEK. Photoinduced and self-initiated graft polymerization on the PEEK surface is one of the several methodologies available for functionalization. However, in comparison with free-radical polymerization, the efficiency of polymerization at the solid-liquid interface is limited. Enhancement of the polymerization rate for grafting could solve the problem. In this study, we observed the acceleration of the polymerization rate of MPC in an aqueous solution by the addition of inorganic salt. The salt itself did not show any adverse effects on the radical polymerization; however, the apparent concentration of the monomer in feed may be increased due to the hydration of ions attributed to salt additives. We could obtain PMPC-grafted PEEK with sufficient PMPC thickness to obtain good functionality with only 5-min photoirradiation by using 2.5mol/L NaCl in the feed solution. Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Breast-feeding attitudes and practices among Vietnamese mothers in Ho Chi Minh City.

PubMed

Lundberg, Pranee C; Ngoc Thu, Trieu Thi

2012-04-01

to describe breast-feeding attitudes and practices among Vietnamese women in Ho Chi Minh City. a descriptive qualitative study was used. The theory of planned behaviour provided the conceptual framework. the Well-baby Clinic, Department of Obstetrics and Gynaecology of a university hospital in Ho Chi Minh City, Vietnam. 23 voluntary Vietnamese mothers. semi-structured in-depth interview with five open-ended questions and observation was used. The interviews were tape-recorded and transcribed verbatim. The data from the interviews and observations were analysed by use of content analysis. five categories of breast-feeding attitudes and practices were identified: breast-feeding best but not exclusive, cultural and traditional beliefs, infant feeding as a learning process, factors influencing decision to breast feed, and intention to feed the child. cultural and traditional beliefs and practices, and socio-economic situation, influenced the Vietnamese mothers' breast feeding. Health-care professionals should consider cultural context and socio-economic issues when preparing infant feeding education and intervention programmes. Appropriate knowledge about cultural values should be included in health-care education in order to provide culturally congruent care to Vietnamese mothers in Vietnam as well as in Western countries. Copyright © 2011 Elsevier Ltd. All rights reserved.

Analysis of the national school feeding program in the municipality of Viçosa, state of Minas Gerais

PubMed Central

Rocha, Naruna Pereira; Filgueiras, Mariana De Santis; de Albuquerque, Fernanda Martins; Milagres, Luana Cupertino; Castro, Ana Paula Pereira; Silva, Mariane Alves; da Costa, Glauce Dias; Priore, Silvia Eloiza; de Novaes, Juliana Farias

2018-01-01

ABSTRACT OBJECTIVE To analyze the implementation of the Brazilian National School Feeding Program as a food and nutritional security policy in public schools. METHODS This a cross-sectional study, with a quantitative and qualitative approach, carried out with 268 schoolchildren aged eight to nine years from the public school system of Viçosa, state of Minas Gerais, Brazil, in 2015. Interviews were carried out using semi-structured questionnaires with the children, parents, cooks, nutritionists, trainer of the Technical Assistance and Rural Extension Company, and president of the School Feeding Council. In order to analyze the implementation of the National School Feeding Program in Viçosa, we evaluated the direct weighing of the food served in the schools using mechanical balances with a capacity of up to 10 kg and the perception of the social players involved in the implementation of the National School Feeding Program. The children were questioned about the acceptance of and adherence to the food offered, in addition to the habit of bringing food from home. Parents reported knowledge about the School Feeding Program and Council. The qualitative analysis consisted of content analysis and quantitative analysis using the chi-square test, Fisher’s exact test, and Mann-Whitney test. We adopted the statistical significance of 5% for quantitative analysis. RESULTS Children reported low adherence to the school feeding program and most of them used to bring food from home. Irregularities were identified in the implementation of the National School Feeding Program, such as: inadequate number of nutritionists, suspension of Council meetings, inadequate infrastructure in the areas of preparation and distribution of meals, lack of training of cooks, lack of nutritional adequacy of the food offered, and lack of actions on food and nutritional education. The Program complied with the recommendations for purchasing food from family farms. CONCLUSIONS The National School Feeding Program presented many irregularities in Viçosa. It is important to monitor the problems identified for better reformulation and planning of the Program, in order to guarantee the food and nutritional security of the children served. PMID:29489989

Analysis of the national school feeding program in the municipality of Viçosa, state of Minas Gerais.

PubMed

Rocha, Naruna Pereira; Filgueiras, Mariana De Santis; Albuquerque, Fernanda Martins de; Milagres, Luana Cupertino; Castro, Ana Paula Pereira; Silva, Mariane Alves; Costa, Glauce Dias da; Priore, Silvia Eloiza; Novaes, Juliana Farias de

2018-01-01

OBJECTIVE To analyze the implementation of the Brazilian National School Feeding Program as a food and nutritional security policy in public schools. METHODS This a cross-sectional study, with a quantitative and qualitative approach, carried out with 268 schoolchildren aged eight to nine years from the public school system of Viçosa, state of Minas Gerais, Brazil, in 2015. Interviews were carried out using semi-structured questionnaires with the children, parents, cooks, nutritionists, trainer of the Technical Assistance and Rural Extension Company, and president of the School Feeding Council. In order to analyze the implementation of the National School Feeding Program in Viçosa, we evaluated the direct weighing of the food served in the schools using mechanical balances with a capacity of up to 10 kg and the perception of the social players involved in the implementation of the National School Feeding Program. The children were questioned about the acceptance of and adherence to the food offered, in addition to the habit of bringing food from home. Parents reported knowledge about the School Feeding Program and Council. The qualitative analysis consisted of content analysis and quantitative analysis using the chi-square test, Fisher's exact test, and Mann-Whitney test. We adopted the statistical significance of 5% for quantitative analysis. RESULTS Children reported low adherence to the school feeding program and most of them used to bring food from home. Irregularities were identified in the implementation of the National School Feeding Program, such as: inadequate number of nutritionists, suspension of Council meetings, inadequate infrastructure in the areas of preparation and distribution of meals, lack of training of cooks, lack of nutritional adequacy of the food offered, and lack of actions on food and nutritional education. The Program complied with the recommendations for purchasing food from family farms. CONCLUSIONS The National School Feeding Program presented many irregularities in Viçosa. It is important to monitor the problems identified for better reformulation and planning of the Program, in order to guarantee the food and nutritional security of the children served.

Intensive liquid feeding of dairy calves with a medium crude protein milk replacer: Effects on performance, rumen, and blood parameters.

PubMed

de Paula, M R; Oltramari, C E; Silva, J T; Gallo, M P C; Mourão, G B; Bittar, C M M

2017-06-01

The objective of this study was to evaluate the effects of different liquid-feeding systems using a medium crude protein milk replacer on performance, rumen, and blood parameters. Thirty newborn Holstein calves were blocked according to birth weight and date of birth, and randomly distributed to different liquid-feeding systems: conventional (4 L/d), intensive (8 L/d), or step-up/step-down (wk 1, 4 L/d; wk 2 to 6, 8 L/d; wk 7 and 8, 4 L/d). The commercial milk replacer (12.5% solids, 20.2% crude protein, 15.6% fat) was fed twice daily (0700 and 1700 h) until calves were weaned, at 8 wk of age. Calves were individually housed in wood hutches, with free access to water and starter concentrate, and to hay only after weaning. They were followed through 10 wk of age. Milk replacer and starter intake were inversely affected by feeding system. After weaning, starter intake and hay intake were similar among feeding systems. Total dry matter intake was higher during the liquid-feeding period for calves on the intensive system compared to calves on the conventional system, but conventional feeding resulted in the highest dry matter intake after weaning. Feed efficiency was similar among feeding systems before and after weaning. Average body weight and daily gain were not affected by feeding system before or after weaning. During liquid feeding, diarrhea occurrence was lower for calves on the conventional system; however, when calves on the step-up/step-down system were fed lower volumes of liquid feed, diarrhea occurrence was similar to that of calves on the conventional system. Plasma concentrations of β-hydroxybutyrate were higher for calves on the conventional system, reflecting starter intake. Rumen pH, short-chain fatty acids, and N-NH 3 were not affected by feeding system. Feeding higher volumes of milk replacer with a medium crude protein content had no beneficial effect on the performance of calves up to 10 wk of age. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Method of preparing uranium nitride or uranium carbonitride bodies

DOEpatents

Wilhelm, Harley A.; McClusky, James K.

1976-04-27

Sintered uranium nitride or uranium carbonitride bodies having a controlled final carbon-to-uranium ratio are prepared, in an essentially continuous process, from U.sub.3 O.sub.8 and carbon by varying the weight ratio of carbon to U.sub.3 O.sub.8 in the feed mixture, which is compressed into a green body and sintered in a continuous heating process under various controlled atmospheric conditions to prepare the sintered bodies.

Artificial neural network-aided image analysis system for cell counting.

PubMed

Sjöström, P J; Frydel, B R; Wahlberg, L U

1999-05-01

In histological preparations containing debris and synthetic materials, it is difficult to automate cell counting using standard image analysis tools, i.e., systems that rely on boundary contours, histogram thresholding, etc. In an attempt to mimic manual cell recognition, an automated cell counter was constructed using a combination of artificial intelligence and standard image analysis methods. Artificial neural network (ANN) methods were applied on digitized microscopy fields without pre-ANN feature extraction. A three-layer feed-forward network with extensive weight sharing in the first hidden layer was employed and trained on 1,830 examples using the error back-propagation algorithm on a Power Macintosh 7300/180 desktop computer. The optimal number of hidden neurons was determined and the trained system was validated by comparison with blinded human counts. System performance at 50x and lO0x magnification was evaluated. The correlation index at 100x magnification neared person-to-person variability, while 50x magnification was not useful. The system was approximately six times faster than an experienced human. ANN-based automated cell counting in noisy histological preparations is feasible. Consistent histology and computer power are crucial for system performance. The system provides several benefits, such as speed of analysis and consistency, and frees up personnel for other tasks.

Simplified Ion Thruster Xenon Feed System for NASA Science Missions

NASA Technical Reports Server (NTRS)

Snyder, John Steven; Randolph, Thomas M.; Hofer, Richard R.; Goebel, Dan M.

2009-01-01

The successful implementation of ion thruster technology on the Deep Space 1 technology demonstration mission paved the way for its first use on the Dawn science mission, which launched in September 2007. Both Deep Space 1 and Dawn used a "bang-bang" xenon feed system which has proven to be highly successful. This type of feed system, however, is complex with many parts and requires a significant amount of engineering work for architecture changes. A simplified feed system, with fewer parts and less engineering work for architecture changes, is desirable to reduce the feed system cost to future missions. An attractive new path for ion thruster feed systems is based on new components developed by industry in support of commercial applications of electric propulsion systems. For example, since the launch of Deep Space 1 tens of mechanical xenon pressure regulators have successfully flown on commercial spacecraft using electric propulsion. In addition, active proportional flow controllers have flown on the Hall-thruster-equipped Tacsat-2, are flying on the ion thruster GOCE mission, and will fly next year on the Advanced EHF spacecraft. This present paper briefly reviews the Dawn xenon feed system and those implemented on other xenon electric propulsion flight missions. A simplified feed system architecture is presented that is based on assembling flight-qualified components in a manner that will reduce non-recurring engineering associated with propulsion system architecture changes, and is compared to the NASA Dawn standard. The simplified feed system includes, compared to Dawn, passive high-pressure regulation, a reduced part count, reduced complexity due to cross-strapping, and reduced non-recurring engineering work required for feed system changes. A demonstration feed system was assembled using flight-like components and used to operate a laboratory NSTAR-class ion engine. Feed system components integrated into a single-string architecture successfully operated the engine over the entire NSTAR throttle range over a series of tests. Flow rates were very stable with variations of at most 0.2%, and transition times between throttle levels were typically 90 seconds or less with a maximum of 200 seconds, both significant improvements over the Dawn bang-bang feed system.

High pressure feeder and method of operating to feed granular or fine materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vimalchand, Pannalal; Liu, Guohai; Peng, Wan Wang

2014-10-07

A coal feed system to feed pulverized low rank coals containing up to 25 wt % moisture to gasifiers operating up to 1000 psig pressure is described. The system includes gas distributor and collector gas permeable pipes imbedded in the lock vessel. Different methods of operation of the feed system are disclosed to minimize feed problems associated with bridging and packing of the pulverized coal. The method of maintaining the feed system and feeder device exit pressures using gas addition or extraction with the pressure control device is also described.

High pressure feeder and method of operating to feed granular or fine materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vimalchand, Pannalal; Liu, Guohai; Peng, Wan Wang

A coal feed system to feed pulverized low rank coals containing up to 25 wt % moisture to gasifiers operating up to 1000 psig pressure is described. The system includes gas distributor and collector gas permeable pipes imbedded in the lock vessel. Different methods of operation of the feed system are disclosed to minimize feed problems associated with bridging and packing of the pulverized coal. The method of maintaining the feed system and feeder device exit pressures using gas addition or extraction with the pressure control device is also described.

Design verification and cold-flow modeling test report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-07-01

This report presents a compilation of the following three test reports prepared by TRW for Alaska Industrial Development and Export Authority (AIDEA) as part of the Healy Clean Coal Project, Phase 1 Design of the TRW Combustor and Auxiliary Systems, which is co-sponsored by the Department of Energy under the Clean Coal Technology 3 Program: (1) Design Verification Test Report, dated April 1993, (2) Combustor Cold Flow Model Report, dated August 28, 1992, (3) Coal Feed System Cold Flow Model Report, October 28, 1992. In this compilation, these three reports are included in one volume consisting of three parts, andmore » TRW proprietary information has been excluded.« less

System and method for preparing near-surface heavy oil for extraction using microbial degradation

DOEpatents

Busche, Frederick D [Highland Village, TX; Rollins, John B [Southlake, TX; Noyes, Harold J [Golden, CO; Bush, James G [West Richland, WA

2011-04-12

A system and method for enhancing the recovery of heavy oil in an oil extraction environment by feeding nutrients to a preferred microbial species (bacteria and/or fungi). A method is described that includes the steps of: sampling and identifying microbial species that reside in the oil extraction environment; collecting fluid property data from the oil extraction environment; collecting nutrient data from the oil extraction environment; identifying a preferred microbial species from the oil extraction environment that can transform the heavy oil into a lighter oil; identifying a nutrient from the oil extraction environment that promotes a proliferation of the preferred microbial species; and introducing the nutrient into the oil extraction environment.

Shelf stable meals for public sector uses

NASA Technical Reports Server (NTRS)

Schmandt, J. (Editor)

1977-01-01

The NASA Meal System was developed with three simple concepts in mind: (1) nutritious, conventional foods are packaged in single-serving units and assembled into complete meals; (2) the meals have an extended shelf-life and can be transported and stored without need for refrigeration or freezing; (3) preparation of the meal by the consumer is an easy task which is accomplished in ten minutes or less. The meal system was tested in 1975 and 1976 by different groups of elderly individuals. NASA and the LBJ School of Public Affairs sponsored a national conference to report on the demonstration of the meal system for the elderly and to explore potential uses of the system for social services, institutional feeding programs, disaster relief, and international aid. The proceedings of the conference and how different groups assessed the potential of the meal system are reported.

Centaur propellant acquisition system study

NASA Technical Reports Server (NTRS)

Blatt, M. H.; Walter, M. D.

1975-01-01

A study was performed to determine the desirability of replacing the hydrogen peroxide settling system on the Centaur D-1S with a capillary acquisition system. A comprehensive screening was performed to select the most promising capillary device fluid acquisition, thermal conditioning, and fabrication techniques. Refillable start baskets and bypass feed start tanks were selected for detailed design. Critical analysis areas were settling and refilling, start sequence development with an initially dry boost pump, and cooling the fluid delivered to the boost pump in order to provide necessary net position suction head (NPSH). Design drawings were prepared for the start basket and start tank concepts for both LO2 and LH2 tanks. System comparisons indicated that the start baskets using wicking for thermal conditioning, and thermal subcooling for boost pump NPSH, are the most desirable systems for future development.

The use of food wastes as feed ingredients for culturing grass carp (Ctenopharyngodon idellus) in Hong Kong.

PubMed

Choi, W M; Lam, C L; Mo, W Y; Wong, M H

2016-04-01

Different types of food wastes, e.g., meats, bones, cereals, fruits, and vegetables, were collected from hotels in Hong Kong, mixed in different ratio, and processed into feed pellets (food wastes (FWs) A, B, and C) for feeding trials in aquaculture species. Grass carp fed with cereal-dominant feed (FW A) showed the best growth (in terms of specific growth rate, relative weight gain, and protein efficiency ratio), among all food waste feeds. However, the growth rates of food waste groups especially the meat product-contained feeds (FW B and FW C) were lower than the commercial feed, Jinfeng(®) 613 formulation (control). The results indicated that grass carp utilized plant proteins better than animal proteins and preferred carbohydrate as a major energy source than lipid. The high-lipid content in feed containing meat products was also a possible reason for hindering growth and resulted high body lipid. It is suggested that lipid should be removed in the preparation of food waste feed or further investigations by implementing supplements, e.g., enzymes in feed to enhance lipid or protein utilization by fish. This utilization of food waste could be an effective and practical way to deal with these wastes in this densely populated city.

Process optimization for the preparation of straw feedstuff for rearing yellow mealworms (Tenebrio molitor L.) in BLSS

NASA Astrophysics Data System (ADS)

Li, Leyuan; Liu, lh64. Hong

2012-07-01

It has been confirmed in our previous work that in bioregenerative life support systems, feeding yellow mealworms (Tenebrio molitor L.) using fermented straw has the potential to provide good animal protein for astronauts, meanwhile treating with plant wastes. However, since the nitrogen content in straw is very low, T. molitor larvae can not obtain sufficient nitrogen, which results in a relatively low growth efficiency. In this study, wheat straw powder was mixed with simulated human urine before fermentation. Condition parameters, e.g. urine:straw ratio, moisture content, inoculation dose, fermentation time, fermentation temperature and pH were optimized using Taguchi method. Larval growth rate and average individual mass of mature larva increased significantly in the group of T. molitor larvae fed with feedstuff prepared with the optimized process.

Grafting of steroids to hyaluronan towards the design of delivery systems for antioxidants: The role of hydrophobic core.

PubMed

Huerta-Ángeles, Gloria; Brandejsová, Martina; Novotný, Jaroslav; Kopecká, Kateřina; Šógorková, Jana; Šmejkalová, Daniela; Velebný, Vladimír

2018-08-01

In this work, amphiphilic hyaluronic acid (HA) was synthesized by the chemical bonding of steroids. Particularly, succinyl cholesterol (SCH), cholic acid (CA), deoxycholic acid (DOCA), and 18β-glycyrrhetinic acid (GA) were activated by benzoyl chloride towards the esterification reaction of HA in water. The degree of substitution can be controlled by varying the feed ratio of mixed anhydride to HA and up to 25% (mol/mol) can be obtained. Due to mild reaction conditions, no degradation of the polysaccharide was observed. The prepared amphiphilic polymers were characterized by NMR, infrared spectroscopy (FT-IR) and SEC/MALLS, as well as turbidity and size of the aggregates. The developed system is proposed for the delivery of hydrophobic drugs; for this purpose, curcumin, vitamin E and coenzyme Q10 were used as hydrophobic models; these molecules were loaded into the conjugates with high efficiency. The loading capacity was a function of degree of substitution. Furthermore, the biocompatibility of the derivatives and the cellular uptake of the delivery system enabled us to demonstrate the potential of the prepared delivery systems. Copyright © 2018 Elsevier Ltd. All rights reserved.

Assessing the effect of administering probiotics in water or as a feed supplement on broiler performance and immune response.

PubMed

Karimi Torshizi, M A; Moghaddam, A R; Rahimi, Sh; Mojgani, N

2010-04-01

1. Two routes of probiotic administration in broiler farms, in water and in feed, were compared using 360 one-day-old male broiler chickens. Controls received no probiotics or antimicrobials. The water group received a probiotic preparation at a rate of 0.5 g/l, and the feed group received it at an inclusion rate of 1 g/kg. 2. Performance of broilers in terms body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR) improved when probiotic was provided via drinking water, compared to the control and feed groups. Probiotic administration reduced plasma cholesterol and triglyceride concentrations. 3. Spleen (28 and 42 d) and bursa (42 d) relative weights were influenced by method of probiotic administration, which also improved T-cell dependent skin thickness response to phytohaemagglutinin (PHA) injection. The effect of challenge by dinitrochlorobenzene (DNCB) depended on the method of probiotic administration. 4. The method of probiotic administration can influence the performance and immune competence of birds, and administration via drinking water appears to be superior to the more conventional in-feed supplementation method.

Effect of Silica Particle Size of Nuclear Waste-to-Glass Conversion - 17319

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dixon, Derek R.; Cutforth, Derek A.; Vanderveer, Bradley J.

The process for converting nuclear waste-to-glass in an electric melter occurs in the cold cap, a crust of reacting solids floating on the glass pool. As the melter feed (a mixture of the nuclear waste and glass forming and modifying additives) heats up in the cold cap, glass-forming reactions ensue, causing the feed matrix to connect, trapping reaction gases to create a foam layer. The foam layer reduces the rate of melting by separating the reacting feed from the melt pool. The size of the silica particle additives in the melter feed affects melt viscosity and, hence, foam stability. Tomore » investigate this effect, seven nuclear waste simulant feeds of a high-level waste were batched as slurries and prepared with dissimilar ranges of silica particle size. Each slurry feed was charged into a laboratory-scale melter (LSM) to produce a cold cap and the propensity of feeds to foam was determined by pressing dried feeds into pellets and monitoring the change of pellet volume in response to heating. Two of these slurries were designed to have dissimilar glass viscosities at 1150°C. In the low temperature region of the cold cap, before the melter feed connects, the feeds without fine silica particles behaved similar to the high viscosity feed as their volume contracted while the feed with silica particles no larger than 5 µm reacted like the low viscosity feed. However, the feed volume similarities reversed as the feed connected and expanded through the foam region of the cold cap.« less

Kinematics Analysis of End Effector for Carrier Robot of Feeding Broiler Chicken System

NASA Astrophysics Data System (ADS)

Syam, Rafiuddin; Arsyad, Hairul; Bauna, Ruslan; Renreng, Ilyas; Bakhri, Syaiful

2018-02-01

The demand for commodities, especially Broiler chicken farms are increasing, the volume of feed requirements Broiler chickens increased with age up to the age of 30-57 days required feed 3,829 grams/day/head, so if the chicken population is 3,000 needed transporting feed 11 487 kg/day, This research aims to produce a robot capable of transporting feed in the top of the cage by using a control system so as to make efficient use of manpower. Design robot performed using software design three-dimensional Solidworks2010, process of making the robot is started with the design manufacture three (3) units of mechanical systems (mechanical system for holder feed, mechanical systems for lifter feed and mechanical systems for transporting feed), then do the design process framework as a component buffer so that the mechanical system will work properly and safely when the robot operates. Furthermore, the manufacture of electronic circuits and control are using Arduino Mega microcontroller. After assembling all components mechanical systems and installation of electronic systems and control, then experiments to evaluate the performance of the robot have been made. The results of experiments showed that all components work well according to plan, in particular the speed and acceleration of end effector motion so it can hold and release the feed well. This strongly supports the robots perform tasks in accordance with the intent, i.e., holding, lifting and moving feed.

Preparation, Phytochemical Investigation, and Safety Evaluation of Chlorogenic Acid Products from Eupatorium adenophorum.

PubMed

Liu, Boyan; Cao, Lili; Zhang, Lijun; Yuan, Xiaofan; Zhao, Bing

2016-12-31

Eupatorium adenophorum is widely distributed throughout the world's tropical and temperate regions. It has become a harmful weed of crops and natural environments. Its leaves contain bioactive compounds such as chlorogenic acid and may be used as feed additives. In this study, chlorogenic acid was extracted and separated from leaves of E. adenophorum . Three chlorogenic acid products were prepared with different purities of 6.11%, 22.17%, and 96.03%. Phytochemical analysis demonstrated that the main toxins of sesquiterpenes were almost completely removed in sample preparation procedure. The three products were evaluated for safety via in vitro and in vivo toxicological studies. All the products exhibited no cytotoxic effects at a dose of 400 μg/mL in an in vitro cell viability assay. When administered in vivo at a single dose up to 1.5 g/kg bw, all three products caused no signs or symptoms of toxicity in mice. These results encourage further exploration of extracts from E. adenophorum in feed additive application.

Evaluation of the performance of Hy-Line Brown laying hens fed soybean or soybean-free diets using cage or free-range rearing systems.

PubMed

Al-Ajeeli, M N; Leyva-Jimenez, H; Abdaljaleel, R A; Jameel, Y; Hashim, M M; Archer, G; Bailey, C A

2018-03-01

This study evaluated egg production and quality variables of caged and free-range Hy-Line Brown laying hens fed soybean meal (SBM) and soybean-meal-free (SBMF) diets. Hens were randomly assigned to the same 2 dietary treatments within 3 location blocks. SBM and SBMF diets with equivalent calculated nutrient content were prepared based on Hy-Line Brown rearing guidelines. The SBMF diets utilized cottonseed meal, corn distillers dried grains with solubles, corn gluten meal, and wheat middlings in place of dehulled soybean meal. The experiment was conducted between August 2015 and January of 2016 within the TAMU Poultry Research Center and data analyzed over 6 consecutive 28-day periods. Data were analyzed as a split-plot with rearing systems designated whole plots and diets designated as subplots. Hens reared in the free-range rearing system peaked a couple of wk later than those hens within the more conventional indoor caged system, and cumulative production data were considerably more variable for hens raised in the free-range environment. Cumulative egg production, feed per dozen eggs and feed conversion ratio (g feed/g egg) were 92 ± 1.23 and 86 ± 1.84%, 1.45 ± 0.02 and 1.89 ± 0.05 kg, and 2.14 ± 0.04 and 2.77 ± 0.08 (P < 0.05), respectively, for the caged vs. free-range rearing systems. Cumulative egg weight, feed per dozen eggs, and feed conversion ratio were 59.9 ± 0.59 and 56.5 ± 0.60 g, 1.57 ± 0.04 and 1.77 ± 0.05 kg, and 2.24 ± 0.06 and 2.67 ± 0.08 kg (P < 0.05) for SBM and SBMF diets, respectively. Diet did not affect cumulative egg production (P > 0.05). With respect to egg quality, there were no differences in cumulative albumen height, Haugh unit, or breaking strength, but there was a significant rearing system by diet interaction for shell thickness, with the free-range hens averaging 40.77 ± 0.19 and 39.86 ± 0.31 μm (P < 0.05), respectively, for the hens fed SBM vs. SBMF diets. In conclusion, the results suggested free-range production is more variable than traditional closed-house cage systems based on standard errors, and SBMF diets containing cottonseed meal can be used in both caged and free-range production systems without affecting egg production, although one might see lower egg weights.

Food Consumption Patterns and Micronutrient Density of Complementary Foods Consumed by Infants Fed Commercially Prepared Baby Foods

PubMed Central

Reidy, Kathleen C.; Bailey, Regan Lucas; Deming, Denise M.; O’Neill, Lynda; Carr, B. Thomas; Lesniauskas, Ruta; Johnson, Wendy

2018-01-01

Nutrition is critically important in the first 1000 days, and while most American babies are fed commercial baby foods, there is little or no evidence from nationally representative data to understand the implications of such consumption. We used 24-hour dietary recall data for 505 infants from The Feeding Infants and Toddlers Study to describe food consumption patterns and micronutrient density of complementary foods consumed by infants fed commercially prepared baby food fruit, vegetables, and dinners and compared with those eaten by nonconsumers of these products. Results show that consumers were significantly more likely to report eating all vegetables (excluding white potatoes, 71% vs 51%), deep yellow vegetables (42% vs 18%), and fruits (79% vs 65%) and were less likely to report eating white potatoes (10% vs 24%), dark green vegetables (4% vs 20%), and sweets (23% vs 47%) than were nonconsumers. Nutrient density of the complementary foods of consumers was greater for fiber, potassium, vitamin A, vitamin C, vitamin E, and magnesium, but lower in sodium and vitamin D. We conclude that infants fed commercially prepared baby foods were more likely to eat vegetables and fruits, and their diets were higher in several micronutrients. These findings provide important insights on complementary feeding and are useful to support the development of evidence-based infant-feeding guidelines. PMID:29706668

Food Consumption Patterns and Micronutrient Density of Complementary Foods Consumed by Infants Fed Commercially Prepared Baby Foods.

PubMed

Reidy, Kathleen C; Bailey, Regan Lucas; Deming, Denise M; O'Neill, Lynda; Carr, B Thomas; Lesniauskas, Ruta; Johnson, Wendy

2018-03-01

Nutrition is critically important in the first 1000 days, and while most American babies are fed commercial baby foods, there is little or no evidence from nationally representative data to understand the implications of such consumption. We used 24-hour dietary recall data for 505 infants from The Feeding Infants and Toddlers Study to describe food consumption patterns and micronutrient density of complementary foods consumed by infants fed commercially prepared baby food fruit, vegetables, and dinners and compared with those eaten by nonconsumers of these products. Results show that consumers were significantly more likely to report eating all vegetables (excluding white potatoes, 71% vs 51%), deep yellow vegetables (42% vs 18%), and fruits (79% vs 65%) and were less likely to report eating white potatoes (10% vs 24%), dark green vegetables (4% vs 20%), and sweets (23% vs 47%) than were nonconsumers. Nutrient density of the complementary foods of consumers was greater for fiber, potassium, vitamin A, vitamin C, vitamin E, and magnesium, but lower in sodium and vitamin D. We conclude that infants fed commercially prepared baby foods were more likely to eat vegetables and fruits, and their diets were higher in several micronutrients. These findings provide important insights on complementary feeding and are useful to support the development of evidence-based infant-feeding guidelines.

Skylab food system

NASA Technical Reports Server (NTRS)

Bush, W. H.

1974-01-01

The Skylab food program was a major effort involving a complex spectrum of activities necessary for the preparation of a crew feeding system. Approximately 17,000 individual food packages and support items, weighing more than 1225 kg, were launched into space as a single unit on board the orbital workshop. This unit provided the three (three-man) Skylab crews with nourishing foods and beverages for a total of 156 days, as well as with eating utensils and accessory items. Additionally, provisions for 5 days (15 man-days) were provided in each of the three command and service modules in a manner similar to that of the Apollo flights. The Skylab food system not only provided the crew with a palatable balanced diet in a familiar and acceptable manner but also supported the formidable mineral balance medical experiment series (M070).

Scoping Studies to Evaluate the Benefits of an Advanced Dry Feed System on the Use of Low-Rank Coal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rader, Jeff; Aguilar, Kelly; Aldred, Derek

2012-03-30

The purpose of this project was to evaluate the ability of advanced low rank coal gasification technology to cause a significant reduction in the COE for IGCC power plants with 90% carbon capture and sequestration compared with the COE for similarly configured IGCC plants using conventional low rank coal gasification technology. GE’s advanced low rank coal gasification technology uses the Posimetric Feed System, a new dry coal feed system based on GE’s proprietary Posimetric Feeder. In order to demonstrate the performance and economic benefits of the Posimetric Feeder in lowering the cost of low rank coal-fired IGCC power with carbonmore » capture, two case studies were completed. In the Base Case, the gasifier was fed a dilute slurry of Montana Rosebud PRB coal using GE’s conventional slurry feed system. In the Advanced Technology Case, the slurry feed system was replaced with the Posimetric Feed system. The process configurations of both cases were kept the same, to the extent possible, in order to highlight the benefit of substituting the Posimetric Feed System for the slurry feed system.« less

Systemic signaling during plant defense.

PubMed

Kachroo, Aardra; Robin, Guillaume P

2013-08-01

Systemic acquired resistance (SAR) is a type of pathogen-induced broad-spectrum resistance in plants. During SAR, primary infection-induced rapid generation and transportation of mobile signal(s) 'prepare' the rest of the plant for subsequent infections. Several, seemingly unrelated, mobile chemical inducers of SAR have been identified, at least two of which function in a feed-back regulatory loop with a lipid transfer-like protein. Signal(s) perception in the systemic tissues relies on the presence of an intact cuticle, the waxy layer covering all aerial parts of the plant. SAR results in chromatin modifications, which prime systemic tissues for enhanced and rapid signaling derived from salicylic acid, which along with its signaling components is key for SAR induction. This review summarizes recent findings related to SAR signal generation, movement, and perception. Copyright © 2013 Elsevier Ltd. All rights reserved.

LC-MS/MS methods for sulfadimethoxine and ormetoprim analysis in feed and fish fillet and a leaching study for feed after alternative procedures for the incorporation of drugs.

PubMed

Fais, Ana Paula; Franco, Rodolfo Scarpino Barboza; da Silva, Agnaldo Fernando Baldo; de Freitas, Osvaldo; Paschoal, Jonas Augusto Rizzato

2017-04-01

This paper describes the method development for sulfadimethoxine (SDM) and ormetoprim (OMP) quantitation in fish feed and fish fillet employing LC-MS/MS. In order to assess the reliability of the analytical method, valuation was undertaken as recommended by guidelines proposed by the Brazilian Ministry of Agriculture. The calibration curve for the quantification of both drugs in feed showed adequate linearity (r > 0.99), precision (CV < 12%) and trueness ranging from 97% to 100%. The method for the determination of SDM and OMP residues in fish fillet involved a simple sample preparation procedure that had adequate linearity (r > 0.99), precision (CV < 16%) and trueness around 100%, with CCα < 100.2 ng g - 1 and CCβ < 100.4 ng g - 1 . With a goal of avoiding the risk of drug leaching from feed into the aquatic environment during fish medication via the oral route, different procedures for drug incorporation into feed were evaluated. Coating feed pellets with ethyl cellulose polymer containing the drug showed promising results. In this case, medicated feed released drugs to water at a level below 6% when the medicated feed stayed in the water for up to 15 min.

Comparison of extraction techniques of robenidine from poultry feed samples.

PubMed

Wilga, Joanna; Wasik, Agata Kot-; Namieśnik, Jacek

2007-10-31

In this paper, effectiveness of six different commonly applied extraction techniques for the determination of robenidine in poultry feed has been compared. The sample preparation techniques included shaking, Soxhlet, Soxtec, ultrasonically assisted extraction, microwave - assisted extraction and accelerated solvent extraction. Comparison of these techniques was done with respect to the recovery extraction, temperature and time, reproducibility and solvent consumption. Every single extract was subjected to clean - up using aluminium oxide column (Pasteur pipette filled with 1g of aluminium oxide), from which robenidine was eluted with 10ml of methanol. The eluate from the clean-up column was collected in a volumetric flask, and finally it was analysed by HPLC-DAD-MS. In general, all extraction techniques were capable of isolating of robenidine from poultry feed, but the recovery obtained using modern extraction techniques was higher than that obtained using conventional techniques. In particular, accelerated solvent extraction was more superior to other techniques, which highlights the advantages of this sample preparation technique. However, in routine analysis, shaking and ultrasonically assisted extraction is still the preferred method for the solution of robenidine and other coccidiostatics.

Co-regulated Approach to Feeding Preterm Infants with Lung Disease: Effects During Feeding

PubMed Central

Thoyre, Suzanne M.; Holditch-Davis, Diane; Schwartz, Todd A.; Melendez Roman, Carlos R.; Nix, William

2015-01-01

Background Very preterm infants are at risk for poor oral feeding endurance, early cessation of eating, poor fluid management with aspiration risk, behavioral distress, and unstable heart rate and oxygenation during feeding. Objective To determine the preliminary effectiveness of a Co-Regulated Approach (CoReg) to oral feeding for very preterm infants at risk for lung disease. Method A randomized, within-subjects, cross-over design was used with 20 very preterm infants requiring oxygen at the start of oral feeding. Infants were bottle fed by the Usual Care approach and by the CoReg approach on 2 consecutive days for an average of four feedings each. Intervention components included co-regulation of suck, swallow, and breathe rhythms using enhanced auditory assessment, infant-guided feeding onsets, and infant positioning in a semielevated, side-lying position. Infant physiology metrics (heart rate, SaO2) were collected continuously prior to and during the feeding. Behavioral and auditory indicators of regulation were coded continuously from videotape during the feeding. Results Seventy feedings were analyzed (38 Usual Care, 32 CoReg) using repeated measures modeling. CoReg feedings were characterized by more frequent preparation of the infant for the feeding, were more commonly initiated in response to infant readiness cues, had more rest periods and breath regulation events, and had fewer sucking stimulation events. CoReg feedings had less SaO2 variability, decline, and time spent in a desaturated state; less heart rate fluctuation and decline; less behavioral disorganization; better fluid management; and less observed effort to breathe. Discussion Support is provided for a co-regulated approach to feeding vulnerable infants. Enhanced auditory assessment of infant feeding rhythms increases the responsiveness of the feeder and improves infant behavioral and physiologic responses. PMID:22565102

Prospects of complete feed system in ruminant feeding: A review

PubMed Central

Beigh, Yasir Afzal; Ganai, Abdul Majeed; Ahmad, Haidar Ali

2017-01-01

Effective utilization of available feed resources is the key for economical livestock rearing. Complete feed system is one of the latest developments to exploit the potential of animal feed resources in the best possible way. The complete feed is a quantitative mixture of all dietary ingredients, blended thoroughly to prevent separation and selection, fed as a sole source of nutrients except water and is formulated in a desired proportion to meet the specific nutrient requirements. The concentrate and roughage levels may vary according to the nutrient requirement of ruminants for different production purposes. The complete feed with the use of fibrous crop residue is a noble way to increase the voluntary feed intake and thus animal’s production performance. In this system of feeding, the ruminant animals have continuous free choice availability of uniform feed mixture, resulting in more uniform load on the rumen and less fluctuation in release of ammonia which supports more efficient utilization of ruminal non-protein nitrogen. Feeding complete diet stabilizes ruminal fermentation, thereby improves nutrient utilization. This feeding system allows expanded use of agro-industrial by­products, crop residues and nonconventional feeds in ruminant ration for maximizing production and minimizing feeding cost, thus being increasingly appreciated. However, to extend the concept extensively to the field and make this technology successful and viable for farmers, more efforts are needed to be taken. PMID:28507415

Properties of Starch-Poly(acrylamide-co-2-acrylamido-2-methylpropanesulfonic acid) Graft Copolymers Prepared by Reactive Extrusion

USDA-ARS?s Scientific Manuscript database

Graft copolymers of starch with acrylamide and 2-acrylamido-2-methylpropanesulfonic acid (AMPS) were prepared by reactive extrusion in a twin-screw extruder. The weight ratio of total monomer to starch was fixed at 1:3, while the molar fraction of AMPS in the monomer feed ranged from 0 to 0.119. Mon...

Pervaporation separation of ethanol-water mixtures using polyethylenimine composite membranes

DOEpatents

Neidlinger, H.H.; Schissel, P.O.; Orth, R.A.

1987-04-21

Synthetic, organic, polymeric membranes were prepared from polyethylenimine for use with pervaporation apparatus in the separation of ethanol-water mixtures. The polymeric material was prepared in dilute aqueous solution and coated onto a polysulfone support film, from which excess polymeric material was subsequently removed. Cross-links were then generated by limited exposure to toluene-2,4-diisocyanate solution, after which the prepared membrane was heat-cured. The resulting membrane structures showed high selectivity in permeating ethanol or water over a wide range of feed concentrations.

Pervaporation separation of ethanol-water mixtures using polyethylenimine composite membranes

DOEpatents

Neidlinger, Hermann H.; Schissel, Paul O.; Orth, Richard A.

1987-01-01

Synthetic, organic, polymeric membranes were prepared from polyethylenimine for use with pervaporation apparatus in the separation of ethanol-water mixtures. The polymeric material was prepared in dilute aqueous solution and coated onto a polysulfone support film, from which excess polymeric material was subsequently removed. Cross-links were then generated by limited exposure to toluene-2,4-diisocyanate solution, after which the prepared membrane was heat-cured. The resulting membrane structures showed high selectivity in permeating ethanol or water over a wide range of feed concentrations.

Xenon Feed System Progress

DTIC Science & Technology

2006-01-01

From - To) 13-06-2006 Technical Paper 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER F04611-00-C-0055 Xenon Feed System Progress (Preprint) 5b. GRANT...propulsion xenon feed system for a flight technology demonstration program. Major accomplishments include: 1) Utilization of the Moog...successfully fed xenon to a 200 watt Hall Effect Thruster in a Technology Demonstration Program. The feed system has demonstrated throttling of xenon

An Indoor Positioning Technique Based on a Feed-Forward Artificial Neural Network Using Levenberg-Marquardt Learning Method

NASA Astrophysics Data System (ADS)

Pahlavani, P.; Gholami, A.; Azimi, S.

2017-09-01

This paper presents an indoor positioning technique based on a multi-layer feed-forward (MLFF) artificial neural networks (ANN). Most of the indoor received signal strength (RSS)-based WLAN positioning systems use the fingerprinting technique that can be divided into two phases: the offline (calibration) phase and the online (estimation) phase. In this paper, RSSs were collected for all references points in four directions and two periods of time (Morning and Evening). Hence, RSS readings were sampled at a regular time interval and specific orientation at each reference point. The proposed ANN based model used Levenberg-Marquardt algorithm for learning and fitting the network to the training data. This RSS readings in all references points and the known position of these references points was prepared for training phase of the proposed MLFF neural network. Eventually, the average positioning error for this network using 30% check and validation data was computed approximately 2.20 meter.

Dry matter intake and feed efficiency profiles of 3 genotypes of Holstein-Friesian within pasture-based systems of milk production.

PubMed

Coleman, J; Berry, D P; Pierce, K M; Brennan, A; Horan, B

2010-09-01

The primary objective of the study was to quantify the effect of genetic improvement using the Irish total merit index (Economic Breeding Index) on dry matter intake and feed efficiency across lactation and to quantify the variation in performance among alternative definitions of feed efficiency. Three genotypes of Holstein-Friesian dairy cattle were established from within the Moorepark dairy research herd: 1) low Economic Breeding Index North American Holstein-Friesian representative of the Irish national average dairy cow, 2) high genetic merit North American Holstein-Friesian, and 3) high genetic merit New Zealand Holstein-Friesian. Animals from within each genotype were randomly allocated to 1 of 2 possible intensive pasture-based feed systems: 1) the Moorepark pasture system (2.64 cows/ha and 500 kg of concentrate supplement per cow per lactation) and 2) a high output per hectare pasture system (2.85 cows/ha and 1,200 kg of concentrate supplement per cow per lactation). A total of 128 and 140 spring-calving dairy cows were used during the years 2007 and 2008, respectively. Each group had an individual farmlet of 17 paddocks, and all groups were managed similarly throughout the study. The effects of genotype, feed system, and the interaction between genotype and feed system on dry matter intake, milk production, body weight, body condition score, and different definitions of feed efficiency were studied using mixed models with factorial arrangements of genotypes and feed systems accounting for the repeated cow records across years. No significant genotype-by-feed-system interactions were observed for any of the variables measured. Results showed that aggressive selection using the Irish Economic Breeding Index had no effect on dry matter intake across lactation when managed on intensive pasture-based systems of milk production, although the ranking of genotypes for feed efficiency differed depending on the definition of feed efficiency used. Performance of animals grouped on alternative definitions of feed efficiency showed that conventional definitions such as feed conversion efficiency or residual feed intake may be inappropriate measures of efficiency for lactating dairy cows. An alternative definition, residual solids production, is proposed. This definition of feed efficiency identifies animals that produce greater volumes of milk solids at similar levels of feed intake without excessive body tissue mobilization and with improved fertility performance. The results also suggest that although there are differences in feed efficiency between strains of Holstein-Friesian, there is also variation within genotypes so that improvements in feed efficiency can be realized if the appropriate definition of feed efficiency is incorporated into breeding programs. Copyright (c) 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Extemporaneous procedures for dissolving risedronate tablets for oral administration and for feeding tubes.

PubMed

Dansereau, Richard J; Crail, Debbie J

2005-01-01

Risedronate (Actonel, Procter & Gamble Pharmaceuticals) is commercially available only as film-coated tablets. Extemporaneous procedures for dissolving tablets for feeding tubes and for preparation of an oral liquid have not previously been evaluated. To evaluate procedures for dissolving risedronate sodium tablets for administration in liquid form and drug recovery following dissolution in cups and following passage through different types of feeding tubes. Tablets (5 and 35 mg) were individually dispersed in 2 oz of water. After 2 minutes, the solution was stirred for 30 seconds, dispensed, and rinsed with an additional 4 oz of water. The sample was filtered and analyzed by HPLC. Ten replicates were performed using the various cups. Gastrostomy and nasoenteric tubes were flushed with 1 oz of water. Individual tablets were dispersed in 2 oz of water; after 2 minutes, the solution was stirred for 30 seconds and poured through the tube and flushed with 1 oz of water. Samples were filtered and analyzed by HPLC. Ten replicates were performed for each type of feeding tube. For cups, the mean amount of drug recovered ranged from 95.7% to 100.5% of the label claim, with a relative standard deviation (RSD) range of 1.1-6.3%. For gastrostomy and nasoenteric tubes, the mean amount of drug recovered ranged from 98.3% to 101.9% of label claim, with an RSD range of 0.9-3.3%. A simple and accurate procedure was developed for dissolving risedronate tablets in water to prepare a liquid formulation for administration orally or through feeding tubes.

PROJECT W-551 DETERMINATION DATA FOR EARLY LAW INTERIM PRETREATMENT SYSTEM SELECTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

TEDESCHI AR

This report provides the detailed assessment forms and data for selection of the solids separation and cesium separation technology for project W-551, Interim Pretreatment System. This project will provide early pretreated low activity waste feed to the Waste Treatment Plant to allow Waste Treatment Plan Low Activity Waste facility operation prior to construction completion of the Pretreatment and High Level Waste facilities. The candidate solids separations technologies are rotary microfiltration and crossflow filtration, and the candidate cesium separation technologies are fractional crystallization, caustic-side solvent extraction, and ion-exchange using spherical resorcinol-formaldehyde resin. This data was used to prepare a cross-cutting technologymore » summary, reported in RPP-RPT-37740.« less

Deterministic quantum teleportation with feed-forward in a solid state system.

PubMed

Steffen, L; Salathe, Y; Oppliger, M; Kurpiers, P; Baur, M; Lang, C; Eichler, C; Puebla-Hellmann, G; Fedorov, A; Wallraff, A

2013-08-15

Engineered macroscopic quantum systems based on superconducting electronic circuits are attractive for experimentally exploring diverse questions in quantum information science. At the current state of the art, quantum bits (qubits) are fabricated, initialized, controlled, read out and coupled to each other in simple circuits. This enables the realization of basic logic gates, the creation of complex entangled states and the demonstration of algorithms or error correction. Using different variants of low-noise parametric amplifiers, dispersive quantum non-demolition single-shot readout of single-qubit states with high fidelity has enabled continuous and discrete feedback control of single qubits. Here we realize full deterministic quantum teleportation with feed-forward in a chip-based superconducting circuit architecture. We use a set of two parametric amplifiers for both joint two-qubit and individual qubit single-shot readout, combined with flexible real-time digital electronics. Our device uses a crossed quantum bus technology that allows us to create complex networks with arbitrary connecting topology in a planar architecture. The deterministic teleportation process succeeds with order unit probability for any input state, as we prepare maximally entangled two-qubit states as a resource and distinguish all Bell states in a single two-qubit measurement with high efficiency and high fidelity. We teleport quantum states between two macroscopic systems separated by 6 mm at a rate of 10(4) s(-1), exceeding other reported implementations. The low transmission loss of superconducting waveguides is likely to enable the range of this and other schemes to be extended to significantly larger distances, enabling tests of non-locality and the realization of elements for quantum communication at microwave frequencies. The demonstrated feed-forward may also find application in error correction schemes.

Accumulation, biotransformation, histopathology and paralysis in the Pacific calico scallop Argopecten ventricosus by the paralyzing toxins of the dinoflagellate Gymnodinium catenatum.

PubMed

Escobedo-Lozano, Amada Y; Estrada, Norma; Ascencio, Felipe; Contreras, Gerardo; Alonso-Rodriguez, Rosalba

2012-05-01

The dinoflagellate Gymnodinium catenatum produces paralyzing shellfish poisons that are consumed and accumulated by bivalves. We performed short-term feeding experiments to examine ingestion, accumulation, biotransformation, histopathology, and paralysis in the juvenile Pacific calico scallop Argopecten ventricosus that consume this dinoflagellate. Depletion of algal cells was measured in closed systems. Histopathological preparations were microscopically analyzed. Paralysis was observed and the time of recovery recorded. Accumulation and possible biotransformation of toxins were measured by HPLC analysis. Feeding activity in treated scallops showed that scallops produced pseudofeces, ingestion rates decreased at 8 h; approximately 60% of the scallops were paralyzed and melanin production and hemocyte aggregation were observed in several tissues at 15 h. HPLC analysis showed that the only toxins present in the dinoflagellates and scallops were the N-sulfo-carbamoyl toxins (C1, C2); after hydrolysis, the carbamate toxins (epimers GTX2/3) were present. C1 and C2 toxins were most common in the mantle, followed by the digestive gland and stomach-complex, adductor muscle, kidney and rectum group, and finally, gills. Toxin profiles in scallop tissue were similar to the dinoflagellate; biotransformations were not present in the scallops in this short-term feeding experiment.

Accumulation, Biotransformation, Histopathology and Paralysis in the Pacific Calico Scallop Argopecten ventricosus by the Paralyzing Toxins of the Dinoflagellate Gymnodinium catenatum

PubMed Central

Escobedo-Lozano, Amada Y.; Estrada, Norma; Ascencio, Felipe; Contreras, Gerardo; Alonso-Rodriguez, Rosalba

2012-01-01

The dinoflagellate Gymnodinium catenatum produces paralyzing shellfish poisons that are consumed and accumulated by bivalves. We performed short-term feeding experiments to examine ingestion, accumulation, biotransformation, histopathology, and paralysis in the juvenile Pacific calico scallop Argopecten ventricosus that consume this dinoflagellate. Depletion of algal cells was measured in closed systems. Histopathological preparations were microscopically analyzed. Paralysis was observed and the time of recovery recorded. Accumulation and possible biotransformation of toxins were measured by HPLC analysis. Feeding activity in treated scallops showed that scallops produced pseudofeces, ingestion rates decreased at 8 h; approximately 60% of the scallops were paralyzed and melanin production and hemocyte aggregation were observed in several tissues at 15 h. HPLC analysis showed that the only toxins present in the dinoflagellates and scallops were the N-sulfo-carbamoyl toxins (C1, C2); after hydrolysis, the carbamate toxins (epimers GTX2/3) were present. C1 and C2 toxins were most common in the mantle, followed by the digestive gland and stomach-complex, adductor muscle, kidney and rectum group, and finally, gills. Toxin profiles in scallop tissue were similar to the dinoflagellate; biotransformations were not present in the scallops in this short-term feeding experiment. PMID:22822356

The effect of supplementation of multistrain probiotic preparation in combination with vitamins and minerals to the basal diet on the growth performance, carcass traits, and physiological response of broilers

PubMed Central

Sugiharto, Sugiharto; Isroli, Isroli; Yudiarti, Turrini; Widiastuti, Endang

2018-01-01

Aim: The aim of the present study was to investigate the effect of supplementation of multistrain probiotic preparation in combination with vitamins and minerals to the broiler chicken diets on their growth performance, hematological parameters, and carcass traits. Materials and Methods: Two hundred and eighty-eight Lohmann 1-day-old broiler chicks were randomly allocated to four groups, i.e., control (without additional supplementation) and three experimental treatments where basal diet was enriched by 0.1%, 0.5%, or 1% of multistrain probiotic preparation in combination with vitamins and minerals, respectively. Blood sampling was conducted on day 28, while the selected organs and eviscerated carcasses were collected on day 42. Results: Dietary supplementation did not affect (p>0.05) the final body weight, feed intake, and feed conversion ratio of broilers. Supplementation by 0.1% and 0.5% of multistrain probiotic preparation in combination with vitamins and minerals reduced (p≤0.05) heart relative weight of broilers. Dietary supplementation tended (p=0.07) to increase the relative weight of ileum and pancreas of broilers. Supplemented birds had lower (p≤0.05) numbers of leukocytes and eosinophils compared to unsupplemented birds. There were tendencies that supplementation of multistrain probiotics in combination with vitamins and minerals resulted in lower (p=0.07) counts of lymphocytes and heterophils when compared with no supplementation. Supplementation by 0.5% of multistrain probiotics in combination with vitamins and minerals resulted in lower (p≤0.05) serum concentration of uric acid when compared with control. There was no significant effect of dietary supplementation on carcass traits, pH, and drip loss of broiler breast muscles. Conclusion: Dietary supplementation of commercial broiler feeds with 0.5% of multistrain probiotic preparation in combination with vitamins and minerals was potential to improve digestive functions and physiological status of broiler chickens. PMID:29657411

REMOVAL OF 137Cs FROM DISSOLVED HANFORD TANK SALTCAKE BY TREATMENT WITH IONSIV IE-911

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rapko, Brian M.; Sinkov, Serguei I.; Levitskaia, Tatiana G.

2005-03-01

This paper describes the preparation of a 137Cs-depleted form of dissolved Hanford tank saltcake. A composite feed solution was treated with IONSIV{reg_sign} IE-911, which effectively reduced the concentration of 137Cs. This allowed for subsequent testing of waste immobilization without significant radiological hazard. Limited characterization of the initial feed solution and a more extensive characterization of the 137Cs-depleted material also are provided.

Stimulation of indigenous lactobacilli by fermented milk prepared with probiotic bacterium, Lactobacillus delbrueckii subsp. bulgaricus strain 2038, in the pigs.

PubMed

Ohashi, Yuji; Tokunaga, Makoto; Taketomo, Naoki; Ushida, Kazunari

2007-02-01

The aim of this study was to evaluate the effect of feeding yoghurt, prepared with Lactobacillus delbrueckii subsp. bulgaricus strain 2038, on indigenous lactobacilli in the pig cecum. Three female pigs fistulated at the cecum were fed 250 g of this yoghurt that contained over 10(11) colony-forming units of L. delbrueckii subsp. bulgaricus strain 2038 with their daily meal for 2 wk. The relative abundance and the composition of cecal lactobacilli was monitored by analysis of bacterial 16S rDNA with real time PCR and amplified bacterial rDNA restriction analysis using Lactobacillus-group specific primers, respectively, for 2 wk prior to, at the end of 2 wk of and 2 wk after the administration of this yoghurt. The relative abundance of lactobacilli was significantly increased by feeding yoghurt (p<0.01), although the bacterial 16S rDNA matching L. delbrueckii subsp. bulgaricus strain 2038 was not detected by amplified bacterial rDNA restriction analysis during this study. The number of operational taxonomic units (OTUs) detected was increased with feeding of the yoghurt in all pigs. At the same time, the estimated cell number of each OTU was increased with feeding of the yoghurt. It is demonstrated that continuous consumption of the probiotic lactobacilli will stimulate the growth of some indigenous lactobacilli and alter the composition of the lactobacilli.

Impact of pulsed xenon ultraviolet disinfection on surface contamination in a hospital facility's expressed human milk feed preparation area.

PubMed

Dippenaar, Ricky; Smith, Johan

2018-02-23

Expressed human milk (EHM) feed preparation areas represent a potential source of unintentional nosocomial infection. Daily disinfection of environmental surfaces remains an essential intervention to mitigate nosocomial infections. The inefficiency of conventional cleaning and disinfection contributes to an increased risk for the acquisition of multi-drug resistant pathogens. "Non touch" technologies such as the pulsed xenon ultraviolet (PX-UVD) light device have documented sustained reduction in surface bacterial colonization and reduced cross contamination. The impact of a PX-UVD on surface colony forming units per square centimeter (cfu/cm 2 ) in feed preparation areas was evaluated following its implementation as standard care. A quasi-experimental study was performed documenting bacterial colonization from 6 high risk feed preparation areas in a community care hospital in South Africa. Pre and post conventional cleaning neutralizing rinse swabs were collected fortnightly over a 16 week control period prior to the introduction of the PX-UVD and compared to a matching set of samples for the PX-UVD period. A 90% reduction in total surface bioburden was noted from the control period (544 cfu/cm 2 ) compared to the corresponding PX-UVD period (50 cfu/cm 2 ). Sub -analysis of both the Pre-clean Control: Pre-clean PX-UVD counts as well as the Post-clean Control: Post-clean PX-UVD counts noted significant improvements (p < 0.001). A statistically significant improvement was noted between pre-and post-cleaning total surface bioburden following exposure to the PX-UVD (p = 0.0004). The introduction of the PX-UVD was associated with a sustained reduction in the pre clean bioburden counts with a risk trend (per week) 0.19, (95% CI [0.056, 0.67], p = 0.01). The use of a PX-UVD as adjunct to standard cleaning protocols was associated with a significant decrease in surface bioburden. The study demonstrated the inefficiency of conventional cleaning. Persistence of potentially pathological species in both periods highlights current health sector challenges.

Winter feeding systems and dairy cow breed have an impact on milk composition and flavour of two Protected Designation of Origin French cheeses.

PubMed

Hurtaud, C; Peyraud, J L; Michel, G; Berthelot, D; Delaby, L

2009-09-01

This study investigates the effects of two feeding systems and two dairy cow breeds on milk yield and composition, physical and sensorial properties of Camembert and Pont-l'Evêque cheeses. The experiment consisted of a 2 × 2 factorial arrangement of treatments. A low energy grass diet with only 15% of concentrate (LowGS) was compared with a high-energy maize silage diet with 30% concentrate (HighMS). Thirty-four Holstein (Ho) and 34 Normande (No) cows in early lactation were assigned to one of two feeding systems for a 6-week period. Cows on the LowGS feeding system had lower milk yield, fat and protein content. In both feeding systems, No cows had lower milk yields but higher milk protein contents than Ho cows. The LowGS feeding system altered milk fatty acid (FA) composition by reducing saturated FA. Breed had only a small impact on milk FA. Concerning milk coagulating properties, only the firmness was reduced by the LowGS feeding and the Ho breed. The effects of breed and feeding system on the protein content of cheeses were more marked in Camembert cheese than in Pont-l'Evêque cheese. However, the Camembert cheese from Ho-LowGS was, in fact, characterized especially by lower protein content. LowGS feeding system and No breed produced more yellow cheeses. Feeding systems had limited effects on the firmness of Camembert and Pont-l'Evêque cheeses measured by penetrometry. In sensory analysis, Ho breed and LowGS feeding produced a Camembert cheese with a more melting texture in the mouth due to the increase of spreadability index and of proteolysis. The type of cheese also had an influence: the effects were more important on Camembert cheese than on Pont-l'Evêque cheese. Only the Ho-LowGS treatment produced a very specific Camembert cheese different from the others. The feeding systems and breed of dairy cow have no determinant effect on PDO (protected designation of origin) Camembert and Pont-l'Evêque cheeses, especially regarding taste. In this kind of trial, despite the effects of feeding systems and breed on milk composition, the role of cheese ripening and microbiology appears to be of considerable importance.

Breast-feeding. The roots.

PubMed

Ben-Nun, L

2006-12-01

Although breast milk provides the best nutrition for the infant, breast-feeding has been decreasing with the growth in use of prepared milk formulas. This paper evaluates the available biblical literature dealing with breast-feeding. The research is unique in character, as it combines contemporary medical knowledge with presentation of cases taken from ancient history. We include no commentaries, but refer only to the words of the Bible exactly as written. Biblical texts relating to breast-feeding were examined and the cases of biblical characters who were breast-fed were studied. The great historical figures such as Isaac, Rebecca, Moses, Samuel, and Joash were breast-fed, openly or secretly. If the biological mother was unable to nurse her child, a wet nurse took over the feeding. Breast-feeding was the only way infants could survive at that time. Weaning day was very important and was celebrated. The wet nurse played an important role in family life, in some cases remaining to live with the infant after weaning, through childhood and even into adulthood. In spite of advanced technology that provides artificial infant formulas, contemporary mothers, just like biblical mothers, should be encouraged to breast-feed their infants.

Boron removal from aqueous solution by direct contact membrane distillation.

PubMed

Hou, Deyin; Wang, Jun; Sun, Xiangcheng; Luan, Zhaokun; Zhao, Changwei; Ren, Xiaojing

2010-05-15

The removal of boron from aqueous solution by direct contact membrane distillation (DCMD) was studied with self-prepared polyvinylidene fluoride (PVDF) hollow fiber membranes in the present work. The effect of pH, boron concentration, temperature and salt concentration of the feed solution on the boron rejection was investigated. The experimental results indicated that boron rejection was less dependent on the feed pH and salt concentration. DCMD process had high boron removal efficiency (>99.8%) and the permeate boron was below the maximum permissible level even at feed concentration as high as 750 mg/L. Although the permeate flux was enhanced exponentially with the feed temperature increasing, the influence of feed temperature on the boron rejection could be neglected. Finally, the natural groundwater sample containing 12.7 mg/L of boron was treated by DCMD process. The permeate boron kept below 20 microg/L whether the feed was acidified or not, but pre-acidification was helpful to maintain the permeate flux stability. All the experimental results indicated that DCMD could be efficiently used for boron removal from aqueous solution. Copyright (c) 2009 Elsevier B.V. All rights reserved.

Development and validation of an LC-UV method for the determination of sulfonamides in animal feeds.

PubMed

Kumar, P; Companyó, R

2012-05-01

A simple LC-UV method was developed for the determination of residues of eight sulfonamides (sulfachloropyridazine, sulfadiazine, sulfadimidine, sulfadoxine, sulfamethoxypyridazine, sulfaquinoxaline, sulfamethoxazole, and sulfadimethoxine) in six types of animal feed. C18, Oasis HLB, Plexa and Plexa PCX stationary phases were assessed for the clean-up step and the latter was chosen as it showed greater efficiency in the clean-up of interferences. Feed samples spiked with sulfonamides at 2 mg/kg were used to assess the trueness (recovery %) and precision of the method. Mean recovery values ranged from 47% to 66%, intra-day precision (RSD %) from 4% to 15% and inter-day precision (RSD %) from 7% to 18% in pig feed. Recoveries and intra-day precisions were also evaluated in rabbit, hen, cow, chicken and piglet feed matrices. Calibration curves with standards prepared in mobile phase and matrix-matched calibration curves were compared and the matrix effects were ascertained. The limits of detection and quantification in the feeds ranged from 74 to 265 µg/kg and from 265 to 868 µg/kg, respectively. Copyright © 2011 John Wiley & Sons, Ltd.

Pap, gruel, and panada: early approaches to artificial infant feeding.

PubMed

Obladen, Michael

2014-01-01

This paper collects information on artificial infant feeding published before 1860, the year when commercial formula became available. We have extensive artifactual evidence of thousands of feeding vessels since the Bronze Age. Special museum collections can be found in London, Paris, Cologne, Fécamp, Toronto, New Mexico, and elsewhere. The literature on the use of animal milk for infant feeding begins with Soranus in the 2nd century CE. Literature evidence from the very first printed books in the 15th century proves that physicians, surgeons, midwives, and the laity were aware of the opportunities and risks of artificial infant feeding. Most 17th to 19th century books on infant care contained detailed recipes for one or several of the following infant foods: pap, a semisolid food made of flour or bread crumbs cooked in water with or without milk; gruel, a thin porridge resulting from boiling cereal in water or milk, and panada, a preparation of various cereals or bread cooked in broth. During the 18th century, the published opinion on artificial feeding evolved from health concerns to a moral ideology. This view ignored the social and economic pressures which forced many mothers to forego or shorten breast-feeding. Bottle-feeding has been common practice throughout history.

Biomass of Spirulina maxima enriched by biosorption process as a new feed supplement for swine.

PubMed

Saeid, A; Chojnacka, K; Korczyński, M; Korniewicz, D; Dobrzański, Z

2013-04-01

This paper deals with the new mineral feed additives with Cu produced in a biosorption process from a semi-technical scale. The natural biomass of edible microalga Spirulina sp. was enriched with Cu(II) and then used as a mineral supplement in feeding experiments on swine to assess its nutrition properties. A total of 24 piglets divided into two groups (control and experimental) were used to determine the bioavailability of a new generation of mineral feed additives based on Spirulina maxima . The control group was feed using traditional inorganic supplements of microelements, while the experimental group was fed with the feed containing the biomass of S. maxima enriched with Cu by biosorption. The apparent absorption was 30 % ( P  < 0.05) higher in the experimental group. No effect on the production results (average daily feed intake, average daily gain, feed conversion ratio) was detected. It was found that copper concentration in feces in the experimental group was 60 % ( P  < 0.05) lower than in the control group. The new preparation-a dietary supplement with microelements produced by biosorption based on biomass of microalgae S. maxima -is a promising alternative to currently used inorganic salts as the source of nutritionally important microelements.

40 CFR 165.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

...)-fertilizer(s), pesticide-pesticide, or a pesticide-animal feed mixture, when: (1) The blend is prepared to... significant chemical, electrolytic, or galvanic manner with the container, or (5) Interacts in a way, such as...

40 CFR 165.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

...)-fertilizer(s), pesticide-pesticide, or a pesticide-animal feed mixture, when: (1) The blend is prepared to... significant chemical, electrolytic, or galvanic manner with the container, or (5) Interacts in a way, such as...

40 CFR 165.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

...)-fertilizer(s), pesticide-pesticide, or a pesticide-animal feed mixture, when: (1) The blend is prepared to... significant chemical, electrolytic, or galvanic manner with the container, or (5) Interacts in a way, such as...

Process for the preparation of methane and/or ethane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagstaff, N.

1981-09-22

According to Shell, methane and ethane can be produced from a C/sub 2/-C/sub 4/ paraffin feed stream (such as the by-product of mineral-oil production) by contacting the stream with certain crystalline silicates at temperatures of 800/sup 0/-1200/sup 0/F and 145 psi pressure. The crystalline silicates must be specially prepared to obtain the required characteristics.

Genetic mapping of a food preference gene in the silkworm, Bombyx mori, using restriction fragment length polymorphisms (RFLPs).

PubMed

Mase, Keisuke; Iizuka, Tetsuya; Yamamoto, Toshio; Okada, Eiji; Hara, Wajirou

2007-06-01

The domesticated silkworm, Bombyx mori, has strict food preferences and grows by feeding on mulberry leaves. However, "Sawa-J", an abnormal feeding habit strain selected from the genetic stock, feeds on an artificial diet without mulberry leaf powder. In this study, the food preference gene in Sawa-J was genetically identified using restriction fragment length polymorphisms (RFLPs) of a cDNA clone on each linkage group. Taking advantage of a lack of genetic recombination in females, reciprocal backcrossed F1 (BC1) progenies were independently prepared using a non-feeding strain, C108, as a mating partner of Sawa-J. Our results of linkage analysis and mapping proved that the feeding behavior is primarily controlled by a major recessive gene mapped at 20.2 cM on RFLP linkage group 9 (RFLG9), and clone e73 at a distance of 4.2 cM was found as the first linked molecular marker.

Surveying selected European feed and livestock production chains for features enabling the case-specific post-market monitoring of livestock for intake and potential health impacts of animal feeds derived from genetically modified crops.

PubMed

Kleter, Gijs; McFarland, Sarah; Bach, Alex; Bernabucci, Umberto; Bikker, Paul; Busani, Luca; Kok, Esther; Kostov, Kaloyan; Nadal, Anna; Pla, Maria; Ronchi, Bruno; Terre, Marta; Einspanier, Ralf

2017-10-06

This review, which has been prepared within the frame of the European Union (EU)-funded project MARLON, surveys the organisation and characteristics of specific livestock and feed production chains (conventional, organic, GM-free) within the EU, with an emphasis on controls, regulations, traceability, and common production practices. Furthermore, an overview of the origin of animal feed used in the EU as well as an examination of the use of genetically modified organisms (GMOs) in feed is provided. From the data, it shows that livestock is traceable at the herd or individual level, depending on the species. Husbandry practices can vary widely according to geography and animal species, whilst controls and checks are in place for notifiable diseases and general health symptoms (such as mortality, disease, productive performance). For feeds, it would be possible only to make coarse estimates, at best, for the amount of GM feed ingredients that an animal is exposed to. Labeling requirements are apparently correctly followed. Provided that confounding factors are taken into account, practices such as organic agriculture that explicitly involve the use of non-GM feeds could be used for comparison to those involving the use of GM feed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mothers' experiences of bottle-feeding: a systematic review of qualitative and quantitative studies.

PubMed

Lakshman, R; Ogilvie, D; Ong, K K

2009-08-01

Most babies receive at least some formula milk. Variations in formula-feeding practices can have both short- and long-term health consequences. The literature on parents' experiences of bottle-feeding was systematically reviewed to understand how formula-feeding decisions are made. Relevant English-language papers, identified by searching 12 electronic databases, reference lists and related articles and by contacting first authors of included papers, were systematically searched for and appraised. The included studies were analysed and synthesised using a combination of narrative and thematic approaches. Consensus on the final inclusion, interpretation and synthesis of studies was reached across the research team. Six qualitative studies and 17 quantitative studies (involving 13 263 participants) were included. Despite wide differences in study design, context, focus and quality, several consistent themes emerged. Mothers who bottle-fed their babies experienced negative emotions such as guilt, anger, worry, uncertainty and a sense of failure. Mothers reported receiving little information on bottle-feeding and did not feel empowered to make decisions. Mistakes in preparation of bottle-feeds were common. No studies examined how mothers made decisions about the frequency or quantity of bottle-feeds. Inadequate information and support for mothers who decide to bottle-feed may put the health of their babies at risk. While it is important to promote breastfeeding, it is also necessary to ensure that the needs of bottle-feeding mothers are met.

The impact of daily multiphase feeding on animal performance, body composition, nitrogen and phosphorus excretions, and feed costs in growing-finishing pigs.

PubMed

Pomar, C; Pomar, J; Dubeau, F; Joannopoulos, E; Dussault, J-P

2014-05-01

The effect of feeding pigs in a three-phase feeding (3PF) system or a daily-phase feeding (DPF) system on growth performance, body composition, and N and P excretions was studied on 8 pens of 10 pigs each. Feeds for the 3PF and DPF treatments were obtained by mixing two feeds, one with a high nutrient concentration and the other with a low nutrient concentration. The DPF pigs tended (P=0.08) to consume more feed (+3.7%) than the 3PF pigs, but only during the first feeding phase. The DPF pigs consumed 7.3% less protein (P<0.01) but a similar amount of total P. For the whole growing period, the DPF pigs tended (P=0.08) to gain more weight (+2.4%) than the 3PF pigs, mainly because of faster growth (P=0.02) during the first feeding period. At the end of the experiment, total body protein mass was similar in the two treatment groups, but the DPF pigs had 8% more body lipids (P=0.04) than the 3PF pigs. Daily multiphase feeding reduced N excretion by 12% (P<0.01) but did not significantly reduce P excretion. In addition, feed costs, nutrient intake and nutrient excretion under the two feeding strategies were simulated and compared after different approaches were used to formulate complete feeds for each phase of the 3PF system, as well as the two feeds used in the DPF program. Simulated feed intake and growth was similar to those observed in the animal experiment. In comparison with the simulated 3PF system, the feed cost for the DPF pigs was reduced by 1.0%, the simulated N and P intakes were reduced by 7.3% and 4.4%, respectively, and the expected N and P excretions were reduced by 12.6% and 6.6%, respectively. The concomitant adjustment of the dietary concentration of nutrients to match the evaluated requirements of pig populations can be an efficient approach to significantly reduce feeding costs and N and P excretions in pig production systems.

Short communication: Measuring feed volume and weight by machine vision.

PubMed

Shelley, A N; Lau, D L; Stone, A E; Bewley, J M

2016-01-01

Individual dairy cow feed intake is closely related to the health and productive output of each cow, with healthy cows generally eating more feed than unhealthy cows. Incorporating the use of an automated system to monitor feed consumption for each cow may be beneficial for dairy farm management. This study examined the use of an inexpensive 3-dimensional video camera to measure feed volume, from which we derived feed weight. Proof-of-concept testing was conducted to determine the effectiveness and capability of the machine vision feed-scanning system and its possible use in feed intake monitoring. Such systems are ideal because they do not impede the workflow of the farm or interrupt feeding behavior. This is an improvement over existing systems that are labor and cost intensive. Our conducted experiments involve measuring feed volume at known weights, up to 22.68 kg, with the resulting volume and weight values analyzed by means of linear and quadratic least squares t-test regression analysis. The effects of feed positioning in the bin and near-range sensor limitations were also examined. The results showed that an estimation of feed weight from 3-dimensional scan of volume measurements could be made to within 0.5 kg of the physically measured feed weight using a digital scale. Future efforts will focus on extending this work to active bunks with multiple cows eating throughout the day and testing total mixed rations of varied composition. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Study on Intelligent Multi-concentrates Feeding System for Dairy Cow

NASA Astrophysics Data System (ADS)

Yan, Yinfa; Wang, Ranran; Song, Zhanhua; Yan, Shitao; Li, Fa-De

To implement precision feeding for dairy cow, an intelligent multi-concentrates feeding system was developed. The system consists of two parts, one is precision ingredients control subsystem, the other is multi-concentrates discharge subsystem. The former controls the latter with 4 stepper motors. The precision ingredients control subsystem was designed based on Samsung S3C2440 ARM9 microprocessor and WinCE5.0 embedded operating system. The feeding system identifies the dairy cow with passive transponder using RFID (Radio frequency identification) reader. According to the differences of based diet intake and individual dairy cow milk yield, the system can automatically and quantificationally discharge 4 kinds of different concentrates on the basis of the cow identification ID. The intelligent multi-concentrates feeding system for dairy cow has been designed and implemented. According to the experiment results, the concentrate feeding error is less than 5%, the cow inditification delay time is less than 0.5s and the cow inditification error rate is less than 0.01%.

Effect of Propellant Feed System Coupling and Hydraulic Parameters on Analysis of Chugging

NASA Technical Reports Server (NTRS)

Wood, Don J.; Dorsch, Robert G.

1967-01-01

A digital distributed parameter model was used to study the effects of propellant-feed- system coupling and various hydraulic parameters on the analytical prediction of chugging instabilities. Coupling between the combustion chamber and feed system was controlled by varying the compliance of the injector-dome region. The coupling with the feed system above the pump was varied by changing the amount of cavitation compliance at the pump inlet. The stability limits and chugging frequencies proved to be strongly dependent on the degree of feed-system coupling. The maximum stability condition occurred with intermediate coupling. Under conditions of a high degree of feed-system-combustor coupling, the stability limits and chugging frequencies were primarily dependent on the feed-system characteristics; the responses were characterized by beating patterns. For the system analyzed, the pump suction line had little effect on the stability limits or chugging frequencies. Beating, present under the condition of near zero injector -dome compliance, was eliminated when the suction line was decoupled by employing a sufficiently high value of pump-inlet compliance. Under conditions of maximum feed-system coupling, the magnitude and distribution of line losses in the discharge line had a significant effect on the stability limits but had negligible effect on the chugging frequency and beating characteristics. Also, the length of the discharge line greatly affected the stability limits, chugging frequency, and beating characteristics. The length of the suction line, however, had little effect on the stability limits and chugging frequency but did influence the beating pattern. A resistive-shunt device attached to the pump discharge line to suppress chugging was investigated. The analysis showed that the device was effective under conditions of high feed-system coupling.

'The midwives aren't allowed to tell you': perceived infant feeding policy restrictions in a formula feeding culture - the Feeding Your Baby Study.

PubMed

Lagan, Briege M; Symon, Andrew; Dalzell, Janet; Whitford, Heather

2014-03-01

to explore the expectations and experiences of postnatal mothers in relation to infant feeding, and to identify how care could be improved. this study used a qualitative, exploratory, descriptive design. Data were collected through one to one in-depth semi-structured interviews and focus groups. Tayside area of Eastern Scotland. seven focus group interviews (n=38 participants) and 40 semi-structured one-to-one interviews with mothers with a range of infant feeding experiences i.e. exclusively breast fed; started breast feeding but changed to formula milk before 16 weeks; exclusively formula fed; or who concurrently breast and formula fed their infant. a principal theme of 'Mixed and missing messages' emerged, incorporating 'Conflicting advice', 'Information gaps' and 'Pressure to breast feed' with a secondary theme of 'Emotional costs'. Several problems were identified with how women were given information, how infant feeding discussions were held, and the type of support available after the infant is born. there was a strong perception that some midwives are not 'allowed' to discuss or provide information on formula feeding, and the women reported feeling pressurised to breast feed. Current interpretation of guidance from the UNICEF UK Baby Friendly Initiative may be restricting antenatal discussions about infant feeding. The combination of this partial preparation antenatally and postnatal support that was often inconsistent seems to incur a counter-productive emotional cost. at strategic, policy and practice levels the infant feeding message needs to change to encourage a more woman-centred focus including discussions about the realities of all types of infant feeding. It is important that health providers continue to promote and support breast feeding; and that effective services are provided to women who wish to breast feed to help them to do so. However provision of information about all aspects of feeding is needed as well as support for women who do not wish to breast feed. © 2013 Published by Elsevier Ltd.

'I didn't know why you had to wait': an evaluation of NHS infant-feeding workshops amongst women living in areas of high deprivation.

PubMed

Andrews, E J; Symon, A; Anderson, A S

2015-12-01

Inappropriate maternal and infant-feeding practices are known to have a major impact on morbidity in infancy, childhood and later life. Ring-fenced funding over 3 years from the Scottish Government to the National Health Service (NHS) in Scotland has allowed the development of a range of nutrition interventions for women of childbearing age and infants living in areas of deprivation to help address these issues. The present study aimed to determine mothers' knowledge of appropriate infant-feeding practices, opinions about feeding advice and any changes in practice following attendance at workshops. Fifteen semi-structured interviews with women who participated in NHS infant-feeding workshops. Verbatim transcripts were analysed using framework analysis. Participants appreciated the opportunity to enhance their knowledge and there was evidence of a reasonable understanding and awareness of appropriate infant-feeding behaviours following workshop attendance. However, the findings highlight the challenge of multiple sources of advice and identify persistent uncertainties about feeding practice. Reported feeding behaviour following workshops was encouraging (e.g. delayed weaning, increased use of -prepared fruits and vegetables), although there was also evidence of resistance to change. The legacy of the workshop in terms of reported confidence in infant feeding was also apparent. The workshops appears to aid current knowledge and practice about infant feeding but further work is needed to examine the long term impact of these interventions on maternal and infant dietary behaviours. © 2014 The British Dietetic Association Ltd.

Influence of feed provisioning prior to digesta sampling on precaecal amino acid digestibility in broiler chickens.

PubMed

Siegert, Wolfgang; Ganzer, Christian; Kluth, Holger; Rodehutscord, Markus

2018-06-01

A regression approach was applied to determine the influence of feed provisioning prior to digesta sampling on precaecal (pc) amino acid (AA) digestibility in broiler chickens. Soybean meal was used as an example test ingredient. Five feed-provisioning protocols were investigated, four with restricted provision and one with ad libitum provision. When provision was restricted, feed was provided for 30 min after a withdrawal period of 12 h. Digesta were sampled 1, 2, 4 and 6 h after feeding commenced. A diet containing 300 g maize starch/kg was prepared. Half or all the maize starch was replaced with soybean meal in two other diets. Average pc digestibility of all determined AA in the soybean meal was 86% for the 4 and 6-h protocols and 66% and 60% for the 2 and 1-h protocols, respectively. Average pc AA digestibility of soybean meal was 76% for ad libitum feed provision. Feed provisioning also influenced the determined variance. Variance in digestibility ranked in magnitude 1 h > ad libitum > 2 h > 6 h > 4 h for all AA. Owing to the considerable influence of feed-provisioning protocols found in this study, comparisons of pc AA digestibility between studies applying different protocols prior to digesta sampling must be treated with caution. Digestibility experiments aimed at providing estimates for practical feed formulation should use feed-provisioning procedures similar to those used in practice.

Lactic acid fermentation in the production of foods from vegetables, cereals and legumes.

PubMed

Steinkraus, K H

1983-09-01

Lactic acid bacteria perform an essential role in the preservation and production of wholesome foods. Generally the lactic acid fermentations are low-cost and often little or no heat is required in their preparation. Thus, they are fuel-efficient. Lactic acid fermented foods have an important role in feeding the world's population on every continent today. As world population rises, lactic acid fermentation is expected to become even more important in preserving fresh vegetables, fruits, cereals and legumes for feeding humanity.

Performance of cellulose acetate butyrate membranes in hyperfiltration of sodium chloride and urea feed solution

NASA Technical Reports Server (NTRS)

Wydeven, T.; Leban, M.

1973-01-01

Cellulose acetate butyrate (CAB) membranes are shown to give high salt and urea rejection with water flux of about 3 gallons/sq ft per day at 600 psig. Membranes prepared from a formulation containing glyoxal show a significant increase in flux and decrease in salt and urea rejection with drying time. Zero drying time gives maximum urea and salt rejection and is therefore most suitable for hyperfiltration of sodium chloride and urea feed solution.

Spheroidization of molybdenum powder by radio frequency thermal plasma

NASA Astrophysics Data System (ADS)

Liu, Xiao-ping; Wang, Kuai-she; Hu, Ping; Chen, Qiang; Volinsky, Alex A.

2015-11-01

To control the morphology and particle size of dense spherical molybdenum powder prepared by radio frequency (RF) plasma from irregular molybdenum powder as a precursor, plasma process parameters were optimized in this paper. The effects of the carrier gas flow rate and molybdenum powder feeding rate on the shape and size of the final products were studied. The molybdenum powder morphology was examined using high-resolution scanning electron microscopy. The powder phases were analyzed by X-ray diffraction. The tap density and apparent density of the molybdenum powder were investigated using a Hall flow meter and a Scott volumeter. The optimal process parameters for the spherical molybdenum powder preparation are 50 g/min powder feeding rate and 0.6 m3/h carrier gas rate. In addition, pure spherical molybdenum powder can be obtained from irregular powder, and the tap density is enhanced after plasma processing. The average size is reduced from 72 to 62 µm, and the tap density is increased from 2.7 to 6.2 g/cm3. Therefore, RF plasma is a promising method for the preparation of high-density and high-purity spherical powders.

Pervaporation separation of ethanol-water mixtures using polyacrylic acid composite membranes

DOEpatents

Neidlinger, H.H.

1985-05-07

Synthetic, organic, polymeric membranes were prepared from polyacrylic acid salts for use with pervaporation apparatus in the separation of ehthanol-water mixtures. The polymeric material was prepared in dilute aqueous solution and coated onto a polysulfone support film, from which excess polymeric material was subsequently removed. Cross-links were then generated by limited exposure to toluene-2,4-diisocyanata solution, after which the prepared membrane was heat-cured. The resulting membrane structure showed selectivity in permeating water over a wide range of feed concentrations. 4 tabs.

Pervaporation separation of ethanol-water mixtures using polyethylenimine composite membranes

DOEpatents

Neidlinger, H.H.; Schissel, P.O.; Orth, R.A.

1985-06-19

Synthetic, organic, polymeric membranes were prepared from polyethylenimine for use with pervaporation apparatus in the separation of ethanol-water mixtures. The polymeric material was prepared in dilute aqueous solution and coated onto a polysulfone support film, from which excess polymeric material was subsequently removed. Cross-links were then generated by limited exposure to toluene-2,4-diisocyanate solution, after which the prepared membrane was heat-cured. The resulting membrane structures showed high selectivity in permeating ethanol or water over a wide range of feed concentrations. 2 tabs.

Survival and growth of newly transformed Lampsilis cardium and Lampsilis siliquoidea in a flow-through, continuous feeding test system

USGS Publications Warehouse

Meinertz, Jeffery R.; Schreier, Theresa M.; Hess, Karina R.; Bartsch, Michelle

2011-01-01

A test system was evaluated for assessing chronic toxicity of waterborne chemicals with early life stage mussels. To determine if the test system could result in ≥80% survival in a control (unexposed) group, fat mucket mussels (Lampsilis siliquoidea Barnes, 1823) and plain pocketbook mussels (L. cardium Rafinesque, 1820) 1 day post transformation were stocked into test chambers (250 mL beakers, water volume, 200 mL, 21 °C, 40 mussels of 1 species per chamber) within a test system constructed for conducting chronic, continuous exposure, flow-through toxicity tests. The test system contained 60 chambers containing silica sand, 30 chambers with L. siliquoidea, and 30 with L. cardium. Each chamber in the continuous feeding system received 1 of 6 food types prepared with concentrated algal products. After 28 days, mussels were harvested from chambers to assess survival and growth. For L. siliquoidea, mean survival ranged from 34 to 80% and mean shell length ranged from 464 to 643 µm. For L. cardium, mean survival ranged from 12 to 66% and mean shell length ranged from 437 to 612 µm. The maximum mean growth rate for L. siliquoidea was 12.7 µm/d and for L. cardium was 11.8 µm/d. When offered a continuous diet of Nannochloropsis, Tetraselmis, and Chlorella for 28 days in the test system, the survival of 1 day post transformation L. siliquoidea was 80%. The test system can be easily enhanced with a pumping system continuously delivering test chemical to the test system's flow stream allowing for chronic toxicity tests with 1 day post transformation mussels.

Separation of copper ions from iron ions using PVA-g-(acrylic acid/N-vinyl imidazole) membranes prepared by radiation-induced grafting.

PubMed

Ajji, Zaki; Ali, Ali M

2010-01-15

Acrylic acid (AAc), N-vinyl imidazole (Azol) and their binary mixtures were graft copolymerized onto poly(vinyl alcohol) membranes using gamma irradiation. The ability of the grafted membranes to separate Cu ions from Fe ions was investigated with respect to the grafting yield and the pH of the feed solution. The data showed that the diffusion of copper ions from the feed compartment to the receiver compartment depends on the grafting yield of the membranes and the pH of the feed solution. To the contrary, iron ions did not diffuse through the membranes of all grafting yields. However, a limited amount of iron ions diffused in strong acidic medium. This study shows that the prepared membranes could be considered for the separation of copper ions from iron ions. The temperature of thermal decomposition of pure PVA-g-AAc/Azol membrane, PVA-g-AAc/Azol membrane containing copper ions, and PVA-g-AAc/Azol membrane containing iron ions were determined using TGA analyzer. It was shown that the presence of Cu and Fe ions increases the decomposition temperature, and the membranes bonded with iron ions are more stable than those containing copper ions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, H.K.

Research objectives were to study the effect of food source, preparation method and chemical form on bioavailability of chromium. Chromium concentration in potatoes was determined and tubers labeled either intrinsically or extrinsically with radioactive chromate. A labeled chromium complexes was isolated from preparations of raw, baked or fried potatoes and chromatographed on gel permeation media. Availability of the potato chromium complex to the rat was examined in three feeding studies. Animals were dosed with radioactive extrinsically or intrinsically labeled potato extract or with chromate. A labeled chromium complex was isolated from gastrointestinal contents of rats and chromatographed. Potato pulp andmore » peel contained 1.63 and 2.70 ..mu..g Cr/g tissue respectively. True and apparent absorption from extrinsically labeled feedings were 33.4 +/- 4.7 and 29.8 +/- 11.2% respectively, and no differences existed between absorption from raw and cooked potatoes. Absorption from the extrinsic labeled potatoes differed significantly from absorption of inorganic chromatium. Apparent absorption of raw (11.1 +/- 7.9%) and cooked (-0.7 +/- 2.8%) intrinsically labeled feedings differed significantly. Absorption of inorganic chromium was 17.8% (true) and 11.5% (apparent). Examination of the chromium complex isolated from gastrointestinal tract contents showed enlargement of the complex in the stomach after consumption.« less

Synthesis and characterization of nanoparticles conjugated tannase and using it for enhancement of antibacterial activity of tannase produced by Serratia marcescens.

PubMed

Nsayef Muslim, D Sahira; Abbas Dham, Ziyad; J Mohammed, D Nadheer

2017-09-01

Fourteen isolates of Serratia marcescens were collected from patients suffering from septicemia. All theseisolates revealed different levels in tannase production. Tannase was partially purified from Serratia marcescens b9 by precipitation method at 70% saturation of ammonium sulfate. Au, Pt, SnO 2 and SiO 2 nanoparticles were prepared by laser ablation and examined by transmission electron microscopy (TEM), X-ray diffraction pattern and UV-Visible absorption spectroscopy. Conjugation of SiO 2 nanoparticles to tannase by feeding and pulses methods were prepared and characterized by TEM, X-ray diffraction pattern and UV-Visible spectrum. SiO 2 nanoparticles conjugated partially purified tannase by feeding showed the higher effectiveness and higher significant level against all tested UTI causing in comparison with ciprofloxacin antibiotic, SiO 2 nanoparticles alone, partially purified tannase alone and partially purified tannase by pulses. So that we can conclude that feeding method was the best method for enhancement partially purified tannase activity to maximum level thus SiO 2 nanoparticles conjugated partially purified tannase may be a useful antibacterial agent for the treatment of urinary tract infection. Copyright © 2017 Elsevier Ltd. All rights reserved.

Homemade diets: attributes, pitfalls, and a call for action.

PubMed

Remillard, Rebecca L

2008-08-01

At one time, it was estimated that the majority of dogs and cats in the United States received 90% or more of their nutrition from complete and balanced commercially prepared foods, and this estimate was reaffirmed in a 2004 survey. However, 4 years and several pet food and treat recalls later, fewer pet owners are feeding commercial pet food products exclusively and more are asking questions and looking for alternatives. As in any market-driven economy, there are many more alternative diets and food products available today from which pet owners may select. A difficult to measure but growing number of clients are feeding homemade diets that provide 100% of their pet's nutrition, while a larger number are feeding a combination of products, treats, and home prepared meals. Most practitioners can attest to this increase in their client's interest in homemade meals and to having insufficient knowledge to assist them. At a time when motivated clients are considering homemade for their pets as an alternative, veterinarians are less than adequately versed in canine and feline nutrition and dietary options. The article addresses the two most important health issues concerning pet owners and veterinarians about homemade diets: nutritional integrity and food safety.

Child diet and healthy growth in the context of rural poverty in the peruvian andes: what influences primary caregivers' opportunities and choices?

PubMed

Urke, Helga B; Bull, Torill; Mittelmark, Maurice B

2013-09-01

This study explored opportunities and choices related to child feeding among women living in a remote and low-income district in the Andean highlands. Data were collected through in-depth interviews with mothers (N = 7) with reputations for providing good child care, and who participated in an NGO-run social and health programme. The aim of this study was to learn about women's positive experience with child feeding, in the context of living in low-income communities. Such knowledge could be of substantial practical value to health promotion practitioners, in illuminating existing local circumstances and practices that produce good child nutrition. The women who were most knowledgeable about child health and diet were better educated and had relatively higher social positions in the community. Regarding contextual factors related to child feeding, numerous references were made to the extensive use of own crops and food stuffs, seen to provide a better diet than that available in cities where people buy their food. In discussing food and meal preparation habits, there were clear references to child welfare and health as motivating factors in the choices that were made. The NGO programme was not mentioned by the interviewer, to avoid prompting, yet the respondents referred to it explicitly, and attributed improved health-related knowledge and skills to the NGO education interventions (e.g. education about nutritious meal preparation, child care skills, and sanitation practices). It is concluded that the women were concerned about providing a good diet to their children, they were aware of the impact of feeding practices on child health, and that education about health and diet helped them to improved feeding practices.

[The evaluation of organizational structure and work hygiene in milk kitchen centers in Poland on the basis of questionnaire].

PubMed

Weker, H; Rudzka-Kańtoch, Z

1999-01-01

On the basis of available publications and obligatory legal regulations regarding the organisation of collective feeding patterns in Social Service Health Centres a questionnaire study was established to examine the way milk kitchen function in Poland. The study covered 533 milk kitchen centres (in hospitals, orphanages and crèches) from February to December 1997. The afore-mentioned study analysed the general characteristics of the milk kitchen centre, its type of work, supervisory methods and the personnel's hygiene. From the results of this research it can be concluded that the organisational structure of the milk centres was appropriate, appliances and equipment in the majority centres were adequate but basis utensils were insufficient. It is obvious that dietetic feeding methods for this particular group of children are insufficiently applied. Only 22.2% of the centres apply the recommended proposals i.e. without boiling, without pasteurisation, ready for consumption when preparing, infant formulae, follow-up formulae and other mixed products. Work hygiene and health quality of production in the milk kitchen centres is subject to systematic controls by competent individuals from the State Sanitary Inspection services. In the years 1995-96, 72 samples of infant food that mainly came from hospital milk kitchen centres were taken due to the poor microbiological quality of the food. The considerable changes that have taken place over the last few years as far as infant feeding is concerned, for example, the promotion of breast-feeding, taking advantage of prepared dietetic products for infants (infant formulae, follow-up formulae, vegetable products, fruits, vegetable-meat products, cereal products) require changes at the organisational level of infant collective feeding which was confirmed by the afore-mentioned study.

77 FR 41934 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-17

... Transport Association (ATA) of America Code 2800, Aircraft Fuel System. (e) Unsafe Condition This AD was... operational tests of the engine fuel suction feed of the fuel system, and other related testing if necessary... loss of boost pump pressure of the fuel feed system, followed by loss of fuel system suction feed...

Spray Dried Chitosan Microparticles for Intravesical Delivery of Celecoxib: Preparation and Characterization.

PubMed

Lopedota, Angela; Cutrignelli, Annalisa; Laquintana, Valentino; Denora, Nunzio; Iacobazzi, Rosa Maria; Perrone, Mara; Fanizza, Elisabetta; Mastrodonato, Maria; Mentino, Donatella; Lopalco, Antonio; Depalo, Nicoletta; Franco, Massimo

2016-09-01

Chitosan microparticles containing celecoxib (CB), were developed as chemoprevention of bladder cancer. Furthermore two inclusion complexes of CB with methyl-β-cyclodextrin (C1 and C2) were prepared to improve the solubility of the drug. C1 and C2 were obtained by freeze-drying and characterized in the solid state and in solution. Microparticles loaded with CB or C1 or C2 were prepared by spray drying and fully characterized. The yield and encapsulation efficiencies of microparticles depended by both the viscosity and the presence of the inclusion complex in the feed medium nebulised. Generally, the microparticles exhibited a spherical shape with mean diameter of approximately 2 μm which was compatible with local intravesical administration using a catheter. The CB release studies from the microparticles allowed us to identify both immediate release systems (microparticles including the complexes) and prolonged release systems (microparticles including CB alone). The latter exhibited good adhesion to the bladder mucosa, as highlighted by a mucoadhesion study. Histological studies revealed a desquamation of the superficial cells when the bladder mucosa was treated with microparticles loaded with CB, while the morphology of the urothelium did not change when it was treated with microparticles loaded with the inclusion complex. A new CB intravesical formulation than can easily be administered with a catheter and is able to release the drug at the target site for several hours was realized. This new delivery system could be a good alternative to classic oral CB administration.

Controlling Microstructure of Yttria-Stabilized Zirconia Prepared from Suspensions and Solutions by Plasma Spraying with High Feed Rates

NASA Astrophysics Data System (ADS)

Musalek, Radek; Medricky, Jan; Tesar, Tomas; Kotlan, Jiri; Pala, Zdenek; Lukac, Frantisek; Illkova, Ksenia; Hlina, Michal; Chraska, Tomas; Sokolowski, Pawel; Curry, Nicholas

2017-12-01

Introduction of suspension and solution plasma spraying led to a breakthrough in the deposition of yttria-stabilized zirconia (YSZ) coatings and enabled preparation of new types of layers. However, their deposition with high feed rates needed, for example, for the deposition of thermal barrier coatings (TBCs) on large-scale components, is still challenging. In this study, possibility of high-throughput plasma spraying of YSZ coatings is demonstrated for the latest generation of high-enthalpy hybrid water-stabilized plasma (WSP-H) torch technology. The results show that microstructure of the coatings prepared by WSP-H may be tailored for specific applications by the choice of deposition conditions, in particular formulation of the liquid feedstock. Porous and columnar coatings with low thermal conductivity (0.5-0.6 W/mK) were prepared from commercial ethanol-based suspension. Dense vertically cracked coatings with higher thermal conductivity but also higher internal cohesion were deposited from suspension containing ethanol/water mixture and coarser YSZ particles. Spraying of solution formulated from diluted zirconium acetate and yttrium nitrate hexahydrate led also to the successful deposition of YSZ coating combining regions of porous and denser microstructure and providing both low thermal conductivity and improved cohesion of the coating. Enthalpy content, liquid-plasma interaction and coating buildup mechanisms are also discussed.

Integrated modeling and analysis of the multiple electromechanical couplings for the direct driven feed system in machine tools

NASA Astrophysics Data System (ADS)

Yang, Xiaojun; Lu, Dun; Liu, Hui; Zhao, Wanhua

2018-06-01

The complicated electromechanical coupling phenomena due to different kinds of causes have significant influences on the dynamic precision of the direct driven feed system in machine tools. In this paper, a novel integrated modeling and analysis method of the multiple electromechanical couplings for the direct driven feed system in machine tools is presented. At first, four different kinds of electromechanical coupling phenomena in the direct driven feed system are analyzed systematically. Then a novel integrated modeling and analysis method of the electromechanical coupling which is influenced by multiple factors is put forward. In addition, the effects of multiple electromechanical couplings on the dynamic precision of the feed system and their main influencing factors are compared and discussed, respectively. Finally, the results of modeling and analysis are verified by the experiments. It finds out that multiple electromechanical coupling loops, which are overlapped and influenced by each other, are the main reasons of the displacement fluctuations in the direct driven feed system.

Low-head feeding system for thin section castings

DOEpatents

Daniel, Sabah S.; Kleeb, Thomas R.; Lewis, Thomas W.; McDermott, John F.; Ozgu, Mustafa R.; Padfield, Ralph C.; Rego, Donovan N.; Vassilicos, Achilles

1990-01-01

A feed system is provided for conveying molten metal to a thin section caster having mold surfaces moving exclusively in the direction of casting. The feed system has a passage of circular cross section adjacent to one end thereof for receiving molten metal and a rectangular cross section at the delivery end thereof adjacent to the caster. The feed system is designed for supplying molten metal to the caster at low pressure for "closed-pool" type caster operation. The point of highest elevation in the metal flow passage of the feed system is on the upper surface of a transition portion where the cross section changes from circular to rectangular adjacent to the nozzle. The level or height of the high point above the centerline of the nozzle exit is selected so as to be less than the pressure of the metal measured in inches at the nozzle exit. This feature enables the maintenance of positive pressure in the metal within the feed system so that ingress of air into the metal is prevented.

RNA Interference towards the Potato Psyllid, Bactericera cockerelli, Is Induced in Plants Infected with Recombinant Tobacco mosaic virus (TMV)

PubMed Central

Wuriyanghan, Hada; Falk, Bryce W.

2013-01-01

The potato/tomato psyllid, Bactericera cockerelli (B. cockerelli), is an important plant pest and the vector of the phloem-limited bacterium Candidatus Liberibacter psyllaurous (solanacearum), which is associated with the zebra chip disease of potatoes. Previously, we reported induction of RNA interference effects in B. cockerelli via in vitro-prepared dsRNA/siRNAs after intrathoracic injection, and after feeding of artificial diets containing these effector RNAs. In order to deliver RNAi effectors via plant hosts and to rapidly identify effective target sequences in plant-feeding B. cockerelli, here we developed a plant virus vector-based in planta system for evaluating candidate sequences. We show that recombinant Tobacco mosaic virus (TMV) containing B. cockerelli sequences can efficiently infect and generate small interfering RNAs in tomato (Solanum lycopersicum), tomatillo (Physalis philadelphica) and tobacco (Nicotiana tabacum) plants, and more importantly delivery of interfering sequences via TMV induces RNAi effects, as measured by actin and V-ATPase mRNA reductions, in B. cockerelli feeding on these plants. RNAi effects were primarily detected in the B. cockerelli guts. In contrast to our results with TMV, recombinant Potato virus X (PVX) and Tobacco rattle virus (TRV) did not give robust infections in all plants and did not induce detectable RNAi effects in B. cockerelli. The greatest RNA interference effects were observed when B. cockerelli nymphs were allowed to feed on leaf discs collected from inoculated or lower expanded leaves from corresponding TMV-infected plants. Tomatillo plants infected with recombinant TMV containing B. cockerelli actin or V-ATPase sequences also showed phenotypic effects resulting in decreased B. cockerelli progeny production as compared to plants infected by recombinant TMV containing GFP. These results showed that RNAi effects can be achieved in plants against the phloem feeder, B. cockerelli, and the TMV-plant system will provide a faster and more convenient method for screening of suitable RNAi target sequences in planta. PMID:23824081

A Markov random field based approach to the identification of meat and bone meal in feed by near-infrared spectroscopic imaging.

PubMed

Jiang, Xunpeng; Yang, Zengling; Han, Lujia

2014-07-01

Contaminated meat and bone meal (MBM) in animal feedstuff has been the source of bovine spongiform encephalopathy (BSE) disease in cattle, leading to a ban in its use, so methods for its detection are essential. In this study, five pure feed and five pure MBM samples were used to prepare two sets of sample arrangements: set A for investigating the discrimination of individual feed/MBM particles and set B for larger numbers of overlapping particles. The two sets were used to test a Markov random field (MRF)-based approach. A Fourier transform infrared (FT-IR) imaging system was used for data acquisition. The spatial resolution of the near-infrared (NIR) spectroscopic image was 25 μm × 25 μm. Each spectrum was the average of 16 scans across the wavenumber range 7,000-4,000 cm(-1), at intervals of 8 cm(-1). This study introduces an innovative approach to analyzing NIR spectroscopic images: an MRF-based approach has been developed using the iterated conditional mode (ICM) algorithm, integrating initial labeling-derived results from support vector machine discriminant analysis (SVMDA) and observation data derived from the results of principal component analysis (PCA). The results showed that MBM covered by feed could be successfully recognized with an overall accuracy of 86.59% and a Kappa coefficient of 0.68. Compared with conventional methods, the MRF-based approach is capable of extracting spectral information combined with spatial information from NIR spectroscopic images. This new approach enhances the identification of MBM using NIR spectroscopic imaging.

Effects of feeding a spray-dried multivalent polyclonal antibody preparation on feedlot performance, feeding behavior, carcass characteristics, rumenitis, and blood gas profile of Brangus and Nellore yearling bulls.

PubMed

Millen, D D; Pacheco, R D L; DiLorenzo, N; Martins, C L; Marino, C T; Bastos, J P S T; Mariani, T M; Barducci, R S; Sarti, L M N; DiCostanzo, A; Rodrigues, P H M; Arrigoni, M D B

2015-09-01

The objective of this study was to evaluate the effects of replacing monensin (MON) with a spray-dried multivalent polyclonal antibody preparation (PAP) against several ruminal microorganisms on feedlot performance, carcass characteristics, feeding behavior, blood gas profile, and the rumenitis incidence of Brangus and Nellore yearling bulls. The study was designed as a completely randomized design with a 2 × 2 factorial arrangement, replicated 6 times (4 bulls per pen and a total of 24 pens), in which bulls ( = 48) of each biotype were fed diets containing either MON fed at 300 mg/d or PAP fed at 3 g/d. No significant feed additive main effects were observed for ADG ( = 0.27), G:F ( = 0.28), HCW ( = 0.99), or dressing percentage ( = 0.80). However, bulls receiving PAP had greater DMI ( = 0.02) and larger ( = 0.02) final LM area as well as greater ( < 0.01) blood concentrations of bicarbonate and base excess in the extracellular fluid than bulls receiving MON. Brangus bulls had greater ( < 0.01) ADG and DMI expressed in kilograms, final BW, heavier HCW, and larger initial and final LM area than Nellore bulls. However, Nellore bulls had greater daily DMI fluctuation ( < 0.01), expressed as a percentage, and greater incidence of rumenitis ( = 0.05) than Brangus bulls. In addition, Brangus bulls had greater ( < 0.01) DMI per meal and also presented lower ( < 0.01) DM and NDF rumination rates when compared with Nellore bulls. Significant interactions ( < 0.05) between biotype and feed additive were observed for SFA, unsaturated fatty acids (UFA), MUFA, and PUFA concentrations in adipose tissues. When Nellore bulls were fed PAP, fat had greater ( < 0.05) SFA and PUFA contents but less ( < 0.01) UFA and MUFA than Nellore bulls receiving MON. For Brangus bulls, MON led to greater ( < 0.05) SFA and PUFA and less ( < 0.05) UFA and MUFA than Brangus bulls fed PAP. Feeding a spray-dried PAP led to similar feedlot performance compared with that when feeding MON. Spray-dried PAP might provide a new technology alternative to ionophores.

Growth and production performance of monosex tilapia (Oreochromis niloticus) fed with homemade feed in earthen mini ponds.

PubMed

Ahmed, G U; Sultana, N; Shamsuddin, M; Hossain, M Belal

2013-12-01

Field experiment was conducted to evaluate the growth performance of monosex tilapia using homemade feed with Peninsula Group fish meal and commercially available feed with local fish meal in earthen mini ponds from June-September 2010. Three ponds (T1) were supplied with prepared feed and the other three ponds (T2) with commercially available fish feed. Fish were fed at the rate of 10% of their body weight for the first thirty days then gradually reduced to 6% for the next ten days, 2% for the next ten days and 3% for remaining days. The temperature were ranged from 31.5-33.0 degrees C, DO from 5.5-15 mg L(-1) in T1 and 6.5-14 mg L(-1) in T2, pH from 7.1-8.0 in T1 and 7.1-7.7 in T2, alkalinity from 105-160 mg L(-1) inT1 and 100-145 mg L(-1) in T2, nitrate was 0.06 mg L(-1) in both treatments and ammonia from 0.02 and 0.04 mg L(-1) in T1 and T2, respectively. The results of the present study showed that the best weight gain was observed as 123.48 g in T1 than T2 (111.82 g). The Specific Growth Rate (SGR) was recorded 3.09 and 2.97 and the Food Conversion Ratio (FCR) was 1.51 and 1.40 in T1 and T2, respectively. There was significant (p < 0.05) variation among the survival rate (%) of fishes which were 75.55 and 90.37% in T1 and T2, respectively. The fish productions were 19076 and 16312.11 kg ha(-1) in T1 and T2. The highest net profit (Taka/ha/70 days) of Tk. 15, 83,213 was obtained with T1 So, the prepared feed showed better performance with monosex tilapia in compared with commercial fish feed with local fish meal.

Breast-feeding initiation in low-income women: Role of attitudes, support, and perceived control.

PubMed

Khoury, Amal J; Moazzem, S Wakerul; Jarjoura, Chad M; Carothers, Cathy; Hinton, Agnes

2005-01-01

Despite the documented health and emotional benefits of breast-feeding to women and children, breast-feeding rates are low among subgroups of women. In this study, we examine factors associated with breast-feeding initiation in low-income women, including Theory of Planned Behavior measures of attitude, support, and perceived control, as well as sociodemographic characteristics. A mail survey, with telephone follow-up, of 733 postpartum Medicaid beneficiaries in Mississippi was conducted in 2000. The breast-feeding initiation rate in this population was 38%. Women who were older, white, non-Hispanic, college-educated, married, not certified for the Supplemental Nutrition Program for Women, Infants, and Children, and not working full-time were more likely to breast-feed than formula-feed at hospital discharge. Attitudes regarding benefits and barriers to breast-feeding, as well as health care system and social support, were associated with breast-feeding initiation at the multivariate level. Adding the health care system support variables to the regression model, and specifically support from lactation specialists and hospital nurses, explained the association between breast-feeding initiation and women's perceived control over the time and social constraints barriers to breast-feeding. The findings support the need for health care system interventions, family interventions, and public health education campaigns to promote breast-feeding in low-income women.

Various advanced design projects promoting engineering education

NASA Technical Reports Server (NTRS)

1994-01-01

The Universities Space Research Association (USRA) Advanced Design Program (ADP) program promotes engineering education in the field of design by presenting students with challenging design projects drawn from actual NASA interests. In doing so, the program yields two very positive results. Firstly, the students gain a valuable experience that will prepare them for design problems with which they will be faced in their professional careers. Secondly, NASA is able to use the work done by students as an additional resource in meeting its own design objectives. The 1994 projects include: Universal Test Facility; Automated Protein Crystal Growth Facility; Stiffening of the ACES Deployable Space Boom; Launch System Design for Access to Space; LH2 Fuel Tank Design for SSTO Vehicle; and Feed System Design for a Reduced Pressure Tank.

Competing Role of Bioactive Constituents in Moringa oleifera Extract and Conventional Nutrition Feed on the Performance of Cobb 500 Broilers

PubMed Central

Karthivashan, Govindarajan; Arulselvan, Palanisamy; Alimon, Abd. Razak; Safinar Ismail, Intan; Fakurazi, Sharida

2015-01-01

The influence of Moringa oleifera (MO) leaf extract as a dietary supplement on the growth performance and antioxidant parameters was evaluated on broiler meat and the compounds responsible for the corresponding antioxidant activity were identified. 0.5%, 1.0%, and 1.5% w/v of MO leaf aqueous extracts (MOLE) were prepared, and nutritional feed supplemented with 0%, 0.5%, 1.0%, and 1.5% w/w of MO leaf meal (MOLM) extracts were also prepared and analysed for their in vitro antioxidant potential. Furthermore, the treated broiler groups (control (T1) and treatment (T2, T3, and T4)) were evaluated for performance, meat quality, and antioxidant status. The results of this study revealed that, among the broilers fed MOLM, the broilers fed 0.5% w/w MOLM (T2) exhibited enhanced meat quality and antioxidant status (P < 0.05). However, the antioxidant activity of the MOLE is greater than that of the MOLM. The LC-MS/MS analysis of MOLM showed high expression of isoflavones and fatty acids from soy and corn source, which antagonistically inhibit the expression of the flavonoids/phenols in the MO leaves thereby masking its antioxidant effects. Thus, altering the soy and corn gradients in conventional nutrition feed with 0.5% w/w MO leaves supplement would provide an efficient and cost-effective feed supplement. PMID:25793214

Determining the safety of enzymes used in animal feed.

PubMed

Pariza, Michael W; Cook, Mark

2010-04-01

The purpose of this paper is to provide guidance for evaluating the safety of enzyme preparations used in animal feed. Feed enzymes are typically added to animal feed to increase nutrient bioavailability by acting on feed components prior to or after consumption, i.e., within the gastrointestinal tract. In contrast, food processing enzymes are generally used during processing and then inactivated or removed prior to consumption. The enzymes used in both applications are almost always impure mixtures of active enzyme and other metabolites from the production strain, hence similar safety evaluation procedures for both are warranted. We propose that the primary consideration should be the safety of the production strain and that the decision tree mechanism developed previously for food processing enzymes (Pariza and Johnson, 2001) is appropriate for determining the safety of feed enzymes. Thoroughly characterized non-pathogenic, non-toxigenic microbial strains with a history of safe use in enzyme manufacture are also logical candidates for generating safe strain lineages, from which additional strains may be derived via genetic modification by traditional and non-traditional strategies. For new feed enzyme products derived from a safe strain lineage, it is important to ensure a sufficiently high safety margin for the intended use, and that the product complies with appropriate specifications for chemical and microbial contamination. Copyright 2009 Elsevier Inc. All rights reserved.

Development of Extended Length, Continuous Wire Feed Systems (The National Shipbuilding Research Program)

DTIC Science & Technology

1974-05-01

system employs small permanent magnet motors with a small feeding device located on one or both ends of the motor shaft. The feeding device is in...process desired. The permanent magnet motors having system used in these systems have a speed torque curve that is characteristic by a higher torque at the

Breast-feeding and adherence to infant feeding guidelines do not influence bone mass at age 4 years.

PubMed

Harvey, Nicholas C; Robinson, Sian M; Crozier, Sarah R; Marriott, Lynne D; Gale, Catharine R; Cole, Zoe A; Inskip, Hazel M; Godfrey, Keith M; Cooper, Cyrus

2009-09-01

The impact of variations in current infant feeding practice on bone mineral accrual is not known. We examined the associations between duration of breast-feeding and compliance with infant dietary guidelines and later bone size and density at age 4 years. At total of 599 (318 boys) mother-child pairs were recruited from the Southampton Women's Survey. Duration of breast-feeding was recorded and infant diet was assessed at 6 and 12 months using FFQ. At 6 and 12 months the most important dietary pattern, defined by principal component analysis, was characterised by high consumption of vegetables, fruits and home-prepared foods. As this was consistent with infant feeding recommendations, it was denoted the 'infant guidelines' pattern. At age 4 years, children underwent assessment of whole-body bone size and density using a Hologic Discovery dual-energy X-ray absorptiometry instrument. Correlation methods were used to explore the relationships between infant dietary variables and bone mineral. There was no association between duration of breast-feeding in the first year of life and 4-year bone size or density. 'Infant guidelines' pattern scores at 6 and 12 months were also unrelated to bone mass at age 4 years. We observed wide variations in current infant feeding practice, but these variations were not associated with differences in childhood bone mass at age 4 years.

Diets, equipment, and techniques for maintaining crawfish in the laboratory

USGS Publications Warehouse

Tarshis, I.B.; Avault, James W.

1978-01-01

One commercial and 4 laboratory prepared extruded, water-stable diets were fed 3 times a week in 1-g portions to juvenile male and female White River crawfish, Procambarus acutus acutus (Girard), for 10 weeks. The. binding material in the laboratory preparation was alginate (Kelgin), whereas that in the commercial preparation was starch. No statistically significant weight differences developed between the groups of crawfish at the end of the 10-week period; all 5 diets were found satisfactory for feeding and maintaining P. acutus acutus in the laboratory, and all test crawfish survived throughout the experimental period. Weight gains were highest in a diet containing 50.5% protein; intermediate in those fed a diet with 46.0% protein; and lowest in those fed diets with 31.7 or 36.3% protein. Crawfish fed the commercial preparation of one of the 46.0% protein diets showed a slightly but not significantly higher weight gain than those fed the laboratory preparation of the diet. In an evaluation of the water stability of 5 commercially prepared animal chow diets and the commercial extruded diet, 2 of the commercial diets disintegrated after one hour exposure in water and the other 3 became bloated after one hour and remained on the surface throughout the 24-hour test. The commercial extruded diet maintained its water stability for the full 24 hours. The commercial preparation of the 46.0% protein diet was successfully used under laboratory conditions for feeding and maintaining the following crawfishes: Cambarellus shufeldtii (Faxon), Cambarus acuminatus Faxon, Orconectes limosus (Rafinesque), O. virilis (Hagen), Procambarus clarkii (Girard), and P. spiculifer (Le conte). In longevity experiments Cambarus diogenes diogenes Girard and Procambarus hinei (Ortmann) now have survived for 8 months on this diet in the laboratory.

Novel solutions to low-frequency problems with geometrically designed beam-waveguide systems

NASA Technical Reports Server (NTRS)

Imbriale, W. A.; Esquivel, M. S.; Manshadi, F.

1995-01-01

The poor low-frequency performance of geometrically designed beam-waveguide (BWG) antennas is shown to be caused by the diffraction phase centers being far from the geometrical optics mirror focus, resulting in substantial spillover and defocusing loss. Two novel solutions are proposed: (1) reposition the mirrors to focus low frequencies and redesign the high frequencies to utilize the new mirror positions, and (2) redesign the input feed system to provide an optimum solution for the low frequency. A novel use of the conjugate phase-matching technique is utilized to design the optimum low-frequency feed system, and the new feed system has been implemented in the JPL research and development BWG as part of a dual S-/X-band (2.3 GHz/8.45 GHz) feed system. The new S-band feed system is shown to perform significantly better than the original geometrically designed system.

Preventing mother-to-child transmission: factors affecting mothers' choice of feeding--a case study from Cameroon.

PubMed

Muko, K N; Tchangwe, G K; Ngwa, V C; Njoya, L

2004-11-01

This paper reports on factors influencing the decision of mothers regarding the type of feeding method for their babies in a rural setting in Cameroon. The aim of the study was to ascertain the proportion of mothers choosing the different methods of feeding, to determine the various factors influencing their choices, and to ascertain the relationships of these factors to their respective choices. Questionnaires were used on 108 HIV-positive mothers who had delivered babies and who were administered nevirapine at least 3 months prior to the study. A focus group discussion with mothers also took place. Findings were that more mothers (84%) chose breastfeeding than artificial feeding (16%), while a minority (4%) selected mixed feeding. Factors found to militate against artificial feeding were cost (69%), stigma (64%), family pressure (44%), inconvenience in preparation/administration (38%), prior education from health workers (23%), and loss of special attention from family (8%). On the other hand, advice of health worker (44%), ill health (19.5%), free milk (12.5%),job pressure (12.5%) and loss of beauty (12.5%) were found to militate against breastfeeding. A direct relationship was also found between age, educational level, income size, marital status and choice of feeding. Policies targeting stigma reduction and socio-cultural factors affecting the choice of feeding are needed to optimise uptake of the less risky methods of feeding which could in turn contribute to a reduction in transmission.

High precision NC lathe feeding system rigid-flexible coupling model reduction technology

NASA Astrophysics Data System (ADS)

Xuan, He; Hua, Qingsong; Cheng, Lianjun; Zhang, Hongxin; Zhao, Qinghai; Mao, Xinkai

2017-08-01

This paper proposes the use of dynamic substructure method of reduction of order to achieve effective reduction of feed system for high precision NC lathe feeding system rigid-flexible coupling model, namely the use of ADAMS to establish the rigid flexible coupling simulation model of high precision NC lathe, and then the vibration simulation of the period by using the FD 3D damper is very effective for feed system of bolt connection reduction of multi degree of freedom model. The vibration simulation calculation is more accurate, more quickly.

Spectroscopy applied to feed additives of the European Union Reference Laboratory: a valuable tool for traceability.

PubMed

Omar, Jone; Slowikowski, Boleslaw; Boix, Ana; von Holst, Christoph

2017-08-01

Feed additives need to be authorised to be placed on the market according to Regulation (EU) No. 1831/2003. Next to laying down the procedural requirements, the regulation creates the European Union Reference Laboratory for Feed Additives (EURL-FA) and requires that applicants send samples to the EURL-FA. Once authorised, the characteristics of the marketed feed additives should correspond to those deposited in the sample bank of the EURL-FA. For this purpose, the submitted samples were subjected to near-infrared (NIR) and Raman spectroscopy for spectral characterisation. These techniques have the valuable potential of characterising the feed additives in a non-destructive manner without any complicated sample preparation. This paper describes the capability of spectroscopy for a rapid characterisation of products to establish whether specific authorisation criteria are met. This study is based on the analysis of feed additive samples from different categories and functional groups, namely products containing (1) selenium, (2) zinc and manganese, (3) vitamins and (4) essential oils such as oregano and thyme oil. The use of chemometrics turned out to be crucial, especially in cases where the differentiation of spectra by visual inspection was very difficult.

Observation of residues in tissues of chickens exposed to low dietary concentrations of chloramphenicol.

PubMed

Rejtharová, Martina; Rejthar, Libor; Čačková, Katarína; Bureš, Jiří; Vernerová, Eva; Hera, Alfred

2017-04-01

To investigate potential residues in tissues arising from naturally occurring low levels of chloramphenicol in plant material, feeding studies were conducted with chickens. A common chicken feed was prepared containing 0, 10, 50 and 200 μg kg -1 chloramphenicol and levels were confirmed by LC-MS/MS. Four separate groups of broiler chickens, eight animals in each group, were fed all their 35-day life with this contaminated feed. They were allowed ad libitum access to this feed and fresh water. After slaughtering the chickens, the residues in muscle and liver tissues were determined using GC/MS-NCI method. No residues were detected in tissues of animals from groups fed with feed containing 0, 10 or 50 µg kg -1 . Low chloramphenicol residual concentrations were observed in a few of the muscle samples obtained from the group of chickens fed with feed containing chloramphenicol in added concentration 200 µg kg -1 . No residues were detected in the remaining samples of this group. These results indicate that when residues of chloramphenicol are detected it is in all probability through illegal use.

21 CFR Appendix C to Subpart A of... - Indicative List of Products Covered by Subpart A

Code of Federal Regulations, 2011 CFR

2011-04-01

...: —human medicinal products including prescription and nonprescription drugs; —human biologicals including... referred to as “veterinary biologicals”); —premixes for the preparation of veterinary medicated feeds (EC...

Development of coal-feeding systems at the Morgantown Energy Research Center

NASA Technical Reports Server (NTRS)

Hobday, J. M.

1977-01-01

Systems for feeding crushed and pulverized coal into coal conversion reactor vessels are described. Pneumatic methods for feeding pulverized coal, slurry feeders, and coal pumps, methods for steam pickup, and a method for drying a water-coal slurry in a steam fluidized bed subsequent to feeding the coal into a reactor vessel are included.

The JPL Direct Methanol Liquid-feed PEM Fuel Cell

NASA Technical Reports Server (NTRS)

Halpert, G.; Surampudi, S.

1994-01-01

Recently, there has been a breakthrough in fuel cell technology in the Energy Storage Systems Group at the Jet Propulsion Laboratory with the develpment of a direct methanol, liquid-feed, solid polymer electrolyte membrane (PEM) fuel cell... The methanol liquid-feed, solid polymer electrolyte (PEM) design has numerous system level advantages over the gas-feed design. These include:...

YEAR 2 BIOMASS UTILIZATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christopher J. Zygarlicke

2004-11-01

This Energy & Environmental Research Center (EERC) Year 2 Biomass Utilization Final Technical Report summarizes multiple projects in biopower or bioenergy, transportation biofuels, and bioproducts. A prototype of a novel advanced power system, termed the high-temperature air furnace (HITAF), was tested for performance while converting biomass and coal blends to energy. Three biomass fuels--wood residue or hog fuel, corn stover, and switchgrass--and Wyoming subbituminous coal were acquired for combustion tests in the 3-million-Btu/hr system. Blend levels were 20% biomass--80% coal on a heat basis. Hog fuel was prepared for the upcoming combustion test by air-drying and processing through a hammermore » mill and screen. A K-Tron biomass feeder capable of operating in both gravimetric and volumetric modes was selected as the HITAF feed system. Two oxide dispersion-strengthened (ODS) alloys that would be used in the HITAF high-temperature heat exchanger were tested for slag corrosion rates. An alumina layer formed on one particular alloy, which was more corrosion-resistant than a chromia layer that formed on the other alloy. Research activities were completed in the development of an atmospheric pressure, fluidized-bed pyrolysis-type system called the controlled spontaneous reactor (CSR), which is used to process and condition biomass. Tree trimmings were physically and chemically altered by the CSR process, resulting in a fuel that was very suitable for feeding into a coal combustion or gasification system with little or no feed system modifications required. Experimental procedures were successful for producing hydrogen from biomass using the bacteria Thermotoga, a deep-ocean thermal vent organism. Analytical procedures for hydrogen were evaluated, a gas chromatography (GC) method was derived for measuring hydrogen yields, and adaptation culturing and protocols for mutagenesis were initiated to better develop strains that can use biomass cellulose. Fly ash derived from cofiring coal with waste paper, sunflower hulls, and wood waste showed a broad spectrum of chemical and physical characteristics, according to American Society for Testing and Materials (ASTM) C618 procedures. Higher-than-normal levels of magnesium, sodium, and potassium oxide were observed for the biomass-coal fly ash, which may impact utilization in cement replacement in concrete under ASTM requirements. Other niche markets for biomass-derived fly ash were explored. Research was conducted to develop/optimize a catalytic partial oxidation-based concept for a simple, low-cost fuel processor (reformer). Work progressed to evaluate the effects of temperature and denaturant on ethanol catalytic partial oxidation. A catalyst was isolated that had a yield of 24 mole percent, with catalyst coking limited to less than 15% over a period of 2 hours. In biodiesel research, conversion of vegetable oils to biodiesel using an alternative alkaline catalyst was demonstrated without the need for subsequent water washing. In work related to biorefinery technologies, a continuous-flow reactor was used to react ethanol with lactic acid prepared from an ammonium lactate concentrate produced in fermentations conducted at the EERC. Good yields of ester were obtained even though the concentration of lactic acid in the feed was low with respect to the amount of water present. Esterification gave lower yields of ester, owing to the lowered lactic acid content of the feed. All lactic acid fermentation from amylose hydrolysate test trials was completed. Management activities included a decision to extend several projects to December 31, 2003, because of delays in receiving biomass feedstocks for testing and acquisition of commercial matching funds. In strategic studies, methods for producing acetate esters for high-value fibers, fuel additives, solvents, and chemical intermediates were discussed with several commercial entities. Commercial industries have an interest in efficient biomass gasification designs but are waiting for economic incentives. Utility, biorefinery, pulp and paper, or other industries are interested in lignin as a potential fuel or feedstock but need more information on properties.« less

LITERATURE REVIEW ON IMPACT OF GLYCOLATE ON THE 2H EVAPORATOR AND THE EFFLUENT TREATMENT FACILITY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adu-Wusu, K.

2012-05-10

Glycolic acid (GA) is being studied as an alternate reductant in the Defense Waste Processing Facility (DWPF) feed preparation process. It will either be a total or partial replacement for the formic acid that is currently used. A literature review has been conducted on the impact of glycolate on two post-DWPF downstream systems - the 2H Evaporator system and the Effluent Treatment Facility (ETF). The DWPF recycle stream serves as a portion of the feed to the 2H Evaporator. Glycolate enters the evaporator system from the glycolate in the recycle stream. The overhead (i.e., condensed phase) from the 2H Evaporatormore » serves as a portion of the feed to the ETF. The literature search revealed that virtually no impact is anticipated for the 2H Evaporator. Glycolate may help reduce scale formation in the evaporator due to its high complexing ability. The drawback of the solubilizing ability is the potential impact on the criticality analysis of the 2H Evaporator system. It is recommended that at least a theoretical evaluation to confirm the finding that no self-propagating violent reactions with nitrate/nitrites will occur should be performed. Similarly, identification of sources of ignition relevant to glycolate and/or update of the composite flammability analysis to reflect the effects from the glycolate additions for the 2H Evaporator system are in order. An evaluation of the 2H Evaporator criticality analysis is also needed. A determination of the amount or fraction of the glycolate in the evaporator overhead is critical to more accurately assess its impact on the ETF. Hence, use of predictive models like OLI Environmental Simulation Package Software (OLI/ESP) and/or testing are recommended for the determination of the glycolate concentration in the overhead. The impact on the ETF depends on the concentration of glycolate in the ETF feed. The impact is classified as minor for feed glycolate concentrations {le} 33 mg/L or 0.44 mM. The ETF unit operations that will have minor/major impacts are chlorination, pH adjustment, 1st mercury removal, organics removal, 2nd mercury removal, and ion exchange. For minor impacts, the general approach is to use historical process operations data/modeling software like OLI/ESP and/or monitoring/compiled process operations data to resolve any uncertainties with testing as a last resort. For major impacts (i.e., glycolate concentrations > 33 mg/L or 0.44 mM), testing is recommended. No impact is envisaged for the following ETF unit operations regardless of the glycolate concentration - filtration, reverse osmosis, ion exchange resin regeneration, and evaporation.« less

AN ANALYSIS OF SYSTEMS FOR FEEDING HOT MEALS TO THE ARMY IN THE FIELD DURING 1975-1990 TIME FRAME.

DTIC Science & Technology

An analysis was conducted of a large number of potential systems for feeding hot meals to the Army in the field during the 1975-1990 time frame...system of company level feeding . An analysis of alternative mixed systems (company level and higher) is also made indicating greater potential for food

Robust design of feedback feed-forward iterative learning control based on 2D system theory for linear uncertain systems

NASA Astrophysics Data System (ADS)

Li, Zhifu; Hu, Yueming; Li, Di

2016-08-01

For a class of linear discrete-time uncertain systems, a feedback feed-forward iterative learning control (ILC) scheme is proposed, which is comprised of an iterative learning controller and two current iteration feedback controllers. The iterative learning controller is used to improve the performance along the iteration direction and the feedback controllers are used to improve the performance along the time direction. First of all, the uncertain feedback feed-forward ILC system is presented by an uncertain two-dimensional Roesser model system. Then, two robust control schemes are proposed. One can ensure that the feedback feed-forward ILC system is bounded-input bounded-output stable along time direction, and the other can ensure that the feedback feed-forward ILC system is asymptotically stable along time direction. Both schemes can guarantee the system is robust monotonically convergent along the iteration direction. Third, the robust convergent sufficient conditions are given, which contains a linear matrix inequality (LMI). Moreover, the LMI can be used to determine the gain matrix of the feedback feed-forward iterative learning controller. Finally, the simulation results are presented to demonstrate the effectiveness of the proposed schemes.

Evolution and Development of Dual Ingestion Systems in Mammals: Notes on a New Thesis and Its Clinical Implications

PubMed Central

Alberts, Jeffrey R.; Pickler, Rita H.

2012-01-01

Traditionally, the development of oral feeding is viewed as a continuous, unitary process in which reflex-dominated sucking behavior gives rise to a more varied and volitional feeding behavior. In contrast, we consider the thesis that the infant develops two separable ingestive systems, one for suckling and one for feeding. First, we apply an evolutionary perspective, recognizing that suckling-feeding is a universal, mammalian developmental sequence. We find that in mammalian evolution, feeding systems in offspring were established prior to the evolution of lactation, and therefore suckling is a separable feature that was added to feeding. We next review an experimental literature that characterizes suckling and feeding as separable in terms of their topography, sensory controls, physiological controls, neural substrates, and experience-based development. Together, these considerations constitute a view of “dual ingestive systems.” The thesis, then, is that suckling is not a simple precursor of feeding but is a complete behavior that emerges, forms, and then undergoes a dissolution that overlaps with the emergence of independent feeding. This thesis guides us to focus differently on the challenges of properly managing and facilitating oral ingestion in infants, especially those born preterm, prior to the developmental onset of suckling. PMID:23028391

Evolution and development of dual ingestion systems in mammals: notes on a new thesis and its clinical implications.

PubMed

Alberts, Jeffrey R; Pickler, Rita H

2012-01-01

Traditionally, the development of oral feeding is viewed as a continuous, unitary process in which reflex-dominated sucking behavior gives rise to a more varied and volitional feeding behavior. In contrast, we consider the thesis that the infant develops two separable ingestive systems, one for suckling and one for feeding. First, we apply an evolutionary perspective, recognizing that suckling-feeding is a universal, mammalian developmental sequence. We find that in mammalian evolution, feeding systems in offspring were established prior to the evolution of lactation, and therefore suckling is a separable feature that was added to feeding. We next review an experimental literature that characterizes suckling and feeding as separable in terms of their topography, sensory controls, physiological controls, neural substrates, and experience-based development. Together, these considerations constitute a view of "dual ingestive systems." The thesis, then, is that suckling is not a simple precursor of feeding but is a complete behavior that emerges, forms, and then undergoes a dissolution that overlaps with the emergence of independent feeding. This thesis guides us to focus differently on the challenges of properly managing and facilitating oral ingestion in infants, especially those born preterm, prior to the developmental onset of suckling.

Methods and consequences of including feed intake and efficiency in genetic selection for multiple-trait merit.

PubMed

Barwick, Stephen A; Henzell, Anthony L; Walmsley, Brad J; Johnston, David J; Banks, Robert G

2018-05-04

Methods are presented for including feed intake and efficiency in genetic selection for multiple-trait merit when commercial production is from any combination of pasture or concentrates. Consequences for the production system and for individual animals are illustrated with a beef cattle example. Residual feed intake at pasture (RFI-p), residual feed intake in the feedlot (RFI-f), and cow condition score are additional traits of the breeding objective. Feed requirement change is costed in the economic values of other objective traits. Selection responses are examined when feed costs are ignored, partially or fully included in the breeding objective, and when net feed intake (NFI) EBVs are added to the index. When all feed cost was included and NFI EBVs were in the index, selection (with selection intensity, i = 1) increased production system $ net return by 6.0%, $ per unit of product by 5.2%, $ per unit of feed by 6.6%, total product by 0.7% and product per unit of feed by 1.3%. There was little change in production system total feed. When feed cost was ignored, selection decreased production system $ net return, $ per unit of product, and $ per unit of feed. At the individual trait level, when feed was fully included there were increases in weaning weight-direct (0.8 kg), feedlot entry weight (1.4 kg), dressing % (0.04%), carcass meat % (0.36%), carcase fat depth (0.12 mm), carcass marbling score (0.02 score), cow condition score (0.01 score), calving ease-direct (0.97%), calving ease-maternal (0.22%) and cow weaning rate (1.3%), and decreases in weaning weight-maternal (-0.9 kg), RFI-p (-0.09 kg DM/d), RFI-f (-0.11 kg DM/d), sale weight (-1.6 kg) and cow weight (-8.7 kg). Gains were evident over a range of feed price. Selection for $ net return also increased $ net return per unit of feed, suggesting that $ net return per unit area would increase in grazing industries. Feed cost for trait change was the source of a major genotype × environment interaction affecting animal rankings. Where industry production environments vary, and feed cost for trait change varies with the environment, we recommend that industry indexes be derived for more than one level of feed cost. Cow condition score did not decline while biological and economic efficiency of the production system and individual animal were improving, suggesting that efficiency can be improved under multiple-trait selection without compromising breeding cow welfare.

The Iodine Satellite (iSAT) Propellant Feed System - Design and Development

NASA Technical Reports Server (NTRS)

Polzin, Kurt A.; Seixal, Joao F.; Mauro, Stephanie L.; Burt, Adam O.; Martinez, Armando; Martin, Adam K.

2017-01-01

The development, modeling, and testing of components and subsystems required to feed iodine propellant to a 200-W Hall thruster and cathode are described. This work aims to address design deficiencies and issues associated with the propellant feed system that were revealed by an integrated thruster-cathode-feed system test. The feed system design is modified to use materials that are more resistant to the highly-reactive nature of iodine propellant. Dynamic modeling indicates that the inclusion of additional constraints on feed system tubing will reduce the vibrationally-induced stresses that occur during launch. Full spacecraft thermal modeling show that the feed system heater power levels are sufficient to heat the tank and propellant lines to operating temperatures, where iodine in the tank is sublimed to supply propellant for operation and the tubing is elevated in temperature to keep propellant from redepositing to block the flow. Experiments are conducted to demonstrate that is it possible through the application of heating to clear an iodine deposit blocking the flow. Deposits in the low-pressure portion of the system near the exit to vacuum are shown to be relatively easy to remove in this manner while blockages forming upstream nearer to the higher-pressure propellant tank require significantly more effort to remove. Fluid flow modeling of the feed system is performed, exhibiting some qualitative agreement with experimental data. However, the highly viscous nature of the fluid flow and the dependence of the component flow coefficients on the Reynolds number are likely causes of the generally-poor quantitative agreement between the modeling results and experimentally-measured fluid flow properties.

A chitin-like component in Aedes aegypti eggshells, eggs and ovaries.

PubMed

Moreira, Mônica F; Dos Santos, Amanda S; Marotta, Humberto R; Mansur, Juliana F; Ramos, Isabela B; Machado, Ednildo A; Souza, Gustavo H M F; Eberlin, Marcos N; Kaiser, Carlos R; Kramer, Karl J; Muthukrishnan, Subbaratnam; Vasconcellos, Ana Maria H

2007-12-01

An insoluble white substance was prepared from extracts of eggshells of Aedes aegypti, the yellow fever mosquito and dengue vector. Its infrared and proton NMR spectra were similar to that of standard commercial chitin. This putative chitin-like material, also obtained from ovaries, newly laid and dark eggs, was hydrolyzed in acid and a major product was identified by HPLC to be glucosamine. The eggshell acid hydrolysate was also analyzed by ESI-MS and an ion identical to a glucosamine monoprotonated species was detected. The presence of chitin was also analyzed during different developmental stages of the ovary using a fluorescent microscopy technique and probes specific for chitin. The results showed that a chitin-like material accumulates in oocytes during oogenesis. Streptomyces griseus chitinase pre-treatment of oocytes greatly reduced the chitin-derived fluorescence. Chitinase activity was detected in newborn larvae and eggs prior to hatching. Feeding experiments indicated that the chitin synthesis inhibitor lufenuron inhibited chitin synthesis, either when mosquitoes were allowed to feed directly on lufenuron-treated chickens or when an artificial feeding system was used. Lufenuron inhibited egg hatch, larval development and reduced mosquito viability. These data demonstrate for the first time that (1) a chitin-like material is present in A. aegypti eggs, ovaries and eggshells; (2) a chitin synthesis inhibitor can be used to inhibit mosquito oogenesis; and (3) chitin synthesis inhibitors have potential for controlling mosquito populations.

KSC-2012-2572

NASA Image and Video Library

2012-04-09

CAPE CANAVERAL, Fla. – NASA’s Mobile Aerospace Reconnaissance System, or MARS, is secured aboard NASA’s Freedom Star boat as it is being prepared for a day of testing after departing from Port Canaveral in Florida for the Atlantic Ocean. MARS, run by NASA’s Langley Research Center in Hampton, Va., with its spatial, hyperspectral, thermal, and directed energy capabilities will be used for thermal imaging testing for the upcoming SpaceX Falcon 9 and Dragon capsule test flight to the International Space Station. During today’s test, the MARS X-band radar and kineto tracking mount KTM were tested to ensure that they were synchronized to receive a rocket launch feed. The radar was used to identify an object to see if the KTM could lock on to and track it. The MARS team performed maintenance on the system, confirmed communications links, and tested the design of the mounting system and environmental enclosure. Photo credit: NASA/Cory Huston

KSC-2012-2579

NASA Image and Video Library

2012-04-09

CAPE CANAVERAL, Fla. – NASA’s Mobile Aerospace Reconnaissance System, or MARS, is secured aboard NASA’s Freedom Star boat as it is being prepared for a day of testing after departing from Port Canaveral in Florida for the Atlantic Ocean. MARS, run by NASA’s Langley Research Center in Hampton, Va., with its spatial, hyperspectral, thermal, and directed energy capabilities will be used for thermal imaging testing for the upcoming SpaceX Falcon 9 and Dragon capsule test flight to the International Space Station. During today’s test, the MARS X-band radar and kineto tracking mount KTM were tested to ensure that they were synchronized to receive a rocket launch feed. The radar was used to identify an object to see if the KTM could lock on to and track it. The MARS team performed maintenance on the system, confirmed communications links, and tested the design of the mounting system and environmental enclosure. Photo credit: NASA/Cory Huston

Differential roles of nonsynaptic and synaptic plasticity in operant reward learning-induced compulsive behavior.

PubMed

Sieling, Fred; Bédécarrats, Alexis; Simmers, John; Prinz, Astrid A; Nargeot, Romuald

2014-05-05

Rewarding stimuli in associative learning can transform the irregularly and infrequently generated motor patterns underlying motivated behaviors into output for accelerated and stereotyped repetitive action. This transition to compulsive behavioral expression is associated with modified synaptic and membrane properties of central neurons, but establishing the causal relationships between cellular plasticity and motor adaptation has remained a challenge. We found previously that changes in the intrinsic excitability and electrical synapses of identified neurons in Aplysia's central pattern-generating network for feeding are correlated with a switch to compulsive-like motor output expression induced by in vivo operant conditioning. Here, we used specific computer-simulated ionic currents in vitro to selectively replicate or suppress the membrane and synaptic plasticity resulting from this learning. In naive in vitro preparations, such experimental manipulation of neuronal membrane properties alone increased the frequency but not the regularity of feeding motor output found in preparations from operantly trained animals. On the other hand, changes in synaptic strength alone switched the regularity but not the frequency of feeding output from naive to trained states. However, simultaneously imposed changes in both membrane and synaptic properties reproduced both major aspects of the motor plasticity. Conversely, in preparations from trained animals, experimental suppression of the membrane and synaptic plasticity abolished the increase in frequency and regularity of the learned motor output expression. These data establish direct causality for the contributions of distinct synaptic and nonsynaptic adaptive processes to complementary facets of a compulsive behavior resulting from operant reward learning. Copyright © 2014 Elsevier Ltd. All rights reserved.

Infectious waste feed system

DOEpatents

Coulthard, E. James

1994-01-01

An infectious waste feed system for comminuting infectious waste and feeding the comminuted waste to a combustor automatically without the need for human intervention. The system includes a receptacle for accepting waste materials. Preferably, the receptacle includes a first and second compartment and a means for sealing the first and second compartments from the atmosphere. A shredder is disposed to comminute waste materials accepted in the receptacle to a predetermined size. A trough is disposed to receive the comminuted waste materials from the shredder. A feeding means is disposed within the trough and is movable in a first and second direction for feeding the comminuted waste materials to a combustor.

The Maunakea Spectroscopic Explorer

NASA Astrophysics Data System (ADS)

Venn, Kim; Starkenburg, Else; Martin, Nicolas; Kielty, Collin; Youakim, Kris; Arnetsen, Anke

2018-06-01

The Maunakea Spectroscopic Explorer (MSE) is an ambitious project to transform the Canada-France-Hawaii 3.6-metre telescope into an 11.25-metre facility dedicated to wide field multi-object spectroscopy. Following a successful conceptual design review of ten subsystems and the systems-level review in January 2018, MSE is preparing to move into the Preliminary Design Phase. MSE will simultaneously deploy over 3000 fibers that feed low/medium resolution spectrometers and 1000 fibers that feed high-resolution (R~40,000) spectrometers. This design is expected to revolutionize astrophysical studies requiring large spectroscopic datasets: i.e., reconstructing the Milky Way's formation history through the chemical tagging of stars, searches for the effects of dark matter on stellar streams, determination of environmental influences on galaxy formation since cosmic noon, measuring black hole masses through repeat spectroscopy of quasars, follow-up of large samples identified in other surveys (Gaia, LSST, SKA, etc.), and more. MSE will reuse a large fraction of CFHT’s existing facilities while tripling the diameter of the telescope’s primary mirror and increasing the height of the enclosure by only 10%. I will discuss the progress to date and opportunities for partnerships.

An Agenda for Growth and Metabolism Research in Farm Animals: Healthy Food for a Healthy Nation

NASA Astrophysics Data System (ADS)

Vega, R. S. A.; Manalo, D. D.; Garcia, J. N. M.

2018-02-01

The aim of this paper is to present a paradigm shift from meat demand to health driven understanding of the effects of livestock production and meat consumption in human. Included are comments on animal nutrition research with the purpose of getting more relevant health information. The growth and metabolism research covers the principles from feed intake regulation, nutrient digestion, absorption and growth. Meat preservation provides enough food for the urban population, and its major ingredient includes the combination of salt, sugar and fats, suspected to cause food addiction in man. The reported effect of processed red meat causing systemic inflammation is a major consideration in food preparation, diet selection and reasonable control for meat consumption. In livestock “Pharming” the danger of heavy metal contamination of commercial feed poses threat to human health aside from drug residues. It is proposed that the 50% of global greenhouse gas is due to the lifestyle of the rich and epidemic of obesity-related diseases are the effect of livestock “Pharming” and addiction to fast food and or processed meat.

Azadirachtin-A and tetrahydroazadirachtin-A concentrates: preparation, LC-MS characterization and insect antifeedant/IGR activity against Helicoverpa armigera (Hübner).

PubMed

Sharma, Vandana; Walia, Suresh; Dhingra, Swaran; Kumar, Jitendra; Parmar, Balraj S

2006-10-01

A 60% azadirachtin-A concentrate has been obtained through repeated precipitation with hexane from a methanolic solution of a 20% concentrate. Azadirachtin-A (90%) has been obtained by medium-pressure liquid chromatography of the 60% concentrate with an RP-18 column and a methanol + water (1 + 1 by volume) solvent system. Catalytic hydrogenation of the 60 and 90% azadirachtin concentrates yielded the corresponding tetrahydroazadirachtin concentrates. Dihydroazadirachtin and tetrahydroazadirachtin formed during the first 5 h of hydrogenation were identified by LC-ESI-MS on the basis of their unique mass fragmentation pattern. The efficacy of tetrahydroazadirachtin concentrates in inhibiting the feeding and growth of Helicoverpa armigera (Hübner) larvae has been compared with that of azadirachtin concentrates. They were in general more active and deterred larvae from feeding at all concentrations. Tetrahydroazadirachtin-A (90%) and azadirachtin-A (90%) with respective IC(50) values of 280 and 390 mg L(-1) were effective as insect growth regulators, while tetrahydroazadirachtin-A (90%) displayed higher antifeedant activity (AI(50) 14 mg L(-1)) against the test insect.

Xenon Feed System Progress (Postprint)

DTIC Science & Technology

2006-06-13

development, assembly and test of an electric propulsion xenon feed system for a flight technology demonstration program. Major accomplishments...pressure transducer feedback, the PFCV has successfully fed xenon to a 200 watt Hall Effect Thruster in a Technology Demonstration Program. The feed

Evaluation of 241-AZ tank farm supporting phase 1 privatization waste feed delivery

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARLSON, A.B.

1998-11-19

This evaluation is one in a series of evaluations determining the process needs and assessing the adequacy of existing and planned equipment in meeting those needs at various double-shell tank farms in support of Phase 1 privatization. A number of tank-to-tank transfers and waste preparation activities are needed to process and feed waste to the private contractor in support of Phase 1 privatization. The scope of this evaluation is limited to process needs associated with 241-AZ tank farm during the Phase 1 privatization.

Effects of acute feed restriction combined with targeted use of increasing luteinizing hormone content of follicle-stimulating hormone preparations on ovarian superstimulation, fertilization, and embryo quality in lactating dairy cows

PubMed Central

Bender, R. W.; Hackbart, K. S.; Dresch, A. R.; Carvalho, P. D.; Vieira, L. M.; Crump, P. M.; Guenther, J. N.; Fricke, P. M.; Shaver, R. D.; Combs, D. K.; Wiltbank, M. C.

2018-01-01

Multiple metabolic and hormonal factors can affect the success of protocols for ovarian superstimulation. In this study, the effect of acute feed restriction and increased LH content in the superstimulatory FSH preparation on numbers of ovulations, fertilization, and embryo quality in lactating dairy cows was evaluated. Two experiments were performed using a Latin square design with treatments arranged as a 2 × 2 factorial: feed restriction (FR; 25% reduction in dry matter intake) compared with ad libitum (AL) feeding, combined with high (H) versus low (L) LH in the last 4 injections of the superstimulatory protocol. As expected, FR decreased circulating insulin concentrations (26.7 vs. 46.0 μU/mL). Two analyses were performed: one that evaluated the complete Latin square in experiment 2 and a second that evaluated only the first periods of experiments 1 and 2. For both analyses, follicle numbers, ovulation rates, and corpora lutea on d 7 were not different. In the first period analysis of experiments 1 and 2, we observed an interaction between feed allowance and amount of LH on fertilization rates, percentage of embryos or oocytes that were quality 1 and 2 embryos, and number of embryos or oocytes that were degenerate. Fertilization rates were greater for the AL-L (89.4%) and FR-H (80.1%) treatments compared with the AL-H (47.9%) and FR-L (59.9%) treatments. Similarly, the proportion of total embryos or oocytes designated as quality 1 and 2 embryos was greater for AL-L (76.7%) and FR-H (73.4%) treatments compared with AL-H (35.6%) and FR-L (47.3%) treatments. In addition, the number of degenerate embryos was decreased for AL-L (1.3) and FR-H (0.4) treatments compared with the AL-H (2.6) and FR-L (2.3) treatments. Thus, cows with either too low (FR-L) or too high (AL-H) insulin and LH stimulation had lesser embryo production after superstimulation because of reduced fertilization rate and increased percentage of degenerate embryos. Therefore, interaction of the gonadotropin content of the superstimulatory preparation with the nutritional program of the donor cow needs to be considered to optimize success of ovarian superstimulatory protocols. PMID:24359829

Dietary management of childhood diarrhea in low- and middle-income countries: a systematic review

PubMed Central

2013-01-01

Background Current WHO guidelines on the management and treatment of diarrhea in children strongly recommend continued feeding alongside the administration of oral rehydration solution and zinc therapy, but there remains some debate regarding the optimal diet or dietary ingredients for feeding children with diarrhea. Methods We conducted a systematic search for all published randomized controlled trials evaluating food-based interventions among children under five years old with diarrhea in low- and middle-income countries. We classified 29 eligible studies into one or more comparisons: reduced versus regular lactose liquid feeds, lactose-free versus lactose-containing liquid feeds, lactose-free liquid feeds versus lactose-containing mixed diets, and commercial/specialized ingredients versus home-available ingredients. We used all available outcome data to conduct random-effects meta-analyses to estimate the average effect of each intervention on diarrhea duration, stool output, weight gain and treatment failure risk for studies on acute and persistent diarrhea separately. Results Evidence of low-to-moderate quality suggests that among children with acute diarrhea, diluting or fermenting lactose-containing liquid feeds does not affect any outcome when compared with an ordinary lactose-containing liquid feeds. In contrast, moderate quality evidence suggests that lactose-free liquid feeds reduce duration and the risk of treatment failure compared to lactose-containing liquid feeds in acute diarrhea. Only limited evidence of low quality was available to assess either of these two approaches in persistent diarrhea, or to assess lactose-free liquid feeds compared to lactose-containing mixed diets in either acute or persistent diarrhea. For commercially prepared or specialized ingredients compared to home-available ingredients, we found low-to-moderate quality evidence of no effect on any outcome in either acute or persistent diarrhea, though when we restricted these analyses to studies where both intervention and control diets were lactose-free, weight gain in children with acute diarrhea was shown to be greater among those fed with a home-available diet. Conclusions Among children in low- and middle-income countries, where the dual burden of diarrhea and malnutrition is greatest and where access to proprietary formulas and specialized ingredients is limited, the use of locally available age-appropriate foods should be promoted for the majority of acute diarrhea cases. Lactose intolerance is an important complication in some cases, but even among those children for whom lactose avoidance may be necessary, nutritionally complete diets comprised of locally available ingredients can be used at least as effectively as commercial preparations or specialized ingredients. These same conclusions may also apply to the dietary management of children with persistent diarrhea, but the evidence remains limited. PMID:24564685

75 FR 55461 - Airworthiness Directives; Bombardier, Inc. Model DHC-8-200 and DHC-8-300 Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-13

..., preventing gravity feed. In the event of scavenge system failure, the collector tank fuel level can no longer... closed by the valve spring, preventing gravity feed. In the event of scavenge system failure, the... spring, preventing gravity feed. In the event of scavenge system failure, the collector tank fuel level...

Evaporator Feed Qualification Analysis Of Tank 38H And 43H Samples: January 2010 Through April 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martino, C. J.; Coleman, C. J.

2013-08-21

This report provides the results of analyses that focused on the chemical species that pertain to the sodium aluminosilicate formation potential for archived Tank 38H and 43H subsurface samples from January 2010 through April 2013. Analyses included warm acid strike preparation followed by analysis of silicon, aluminum, and sodium and water dilution preparation followed by analysis for anions. The Tank 43H and 38H supernatant liquid silicon measurements for the January 2010 through April 2013 time period exhibit a slight increasing trend. Over this time period, the silicon concentration in the Tank 43H and Tank 38H samples averaged 179 mg/L andmore » 235 mg/L, respectively. Comparison of Tank 43H sample results from 2005 through April 2013 to the previously developed process control models indicates that the current formation of sodium aluminosilicate in the 2H system is due to the seeded direct precipitation of cancrinite and sodalite.« less

Modelling the Peak Elongation of Nylon6 and Fe Powder Based Composite Wire for FDM Feedstock Filament

NASA Astrophysics Data System (ADS)

Garg, Harish Kumar; Singh, Rupinder

2017-10-01

In the present work, to increase the application domain of fused deposition modelling (FDM) process, Nylon6-Fe powder based composite wire has been prepared as feed stock filament. Further for smooth functioning of feed stock filament without any change in the hardware and software of the commercial FDM setup, the mechanical properties of the newly prepared composite wire must be comparable/at par to the existing material i.e. ABS, P-430. So, keeping this in consideration; an effort has been made to model the peak elongation of in house developed feedstock filament comprising of Nylon6 and Fe powder (prepared on single screw extrusion process) for commercial FDM setup. The input parameters of single screw extruder (namely: barrel temperature, temperature of the die, speed of the screw, speed of the winding machine) and rheological property of material (melt flow index) has been modelled with peak elongation as the output by using response surface methodology. For validation of model the result of peak elongation obtained from the model equation the comparison was made with the results of actual experimentation which shows the variation of ±1 % only.

Behavioral analysis of Drosophila transformants expressing human taste receptor genes in the gustatory receptor neurons.

PubMed

Adachi, Ryota; Sasaki, Yuko; Morita, Hiromi; Komai, Michio; Shirakawa, Hitoshi; Goto, Tomoko; Furuyama, Akira; Isono, Kunio

2012-06-01

Transgenic Drosophila expressing human T2R4 and T2R38 bitter-taste receptors or PKD2L1 sour-taste receptor in the fly gustatory receptor neurons and other tissues were prepared using conventional Gal4/UAS binary system. Molecular analysis showed that the transgene mRNAs are expressed according to the tissue specificity of the Gal4 drivers. Transformants expressing the transgene taste receptors in the fly taste neurons were then studied by a behavioral assay to analyze whether transgene chemoreceptors are functional and coupled to the cell response. Since wild-type flies show strong aversion against the T2R ligands as in mammals, the authors analyzed the transformants where the transgenes are expressed in the fly sugar receptor neurons so that they promote feeding ligand-dependently if they are functional and activate the neurons. Although the feeding preference varied considerably among different strains and individuals, statistical analysis using large numbers of transformants indicated that transformants expressing T2R4 showed a small but significant increase in the preference for denatonium and quinine, the T2R4 ligands, as compared to the control flies, whereas transformants expressing T2R38 did not. Similarly, transformants expressing T2R38 and PKD2L1 also showed a similar preference increase for T2R38-specific ligand phenylthiocarbamide (PTC) and a sour-taste ligand, citric acid, respectively. Taken together, the transformants expressing mammalian taste receptors showed a small but significant increase in the feeding preference that is taste receptor and also ligand dependent. Although future improvements are required to attain performance comparable to the endogenous robust response, Drosophila taste neurons may serve as a potential in vivo heterologous expression system for analyzing chemoreceptor function.

Rotary powder feed through apparatus

DOEpatents

Lewis, Gary K.; Less, Richard M.

2001-01-01

A device for increasing the uniformity of solids within a solids fabrication system, such as a direct light fabrication (DLF) system in which gas entrained powders are passed through the focal point of a moving high-power light which fuses the particles in the powder to a surface being built up in layers. The invention provides a feed through interface wherein gas entrained powders input from stationary input lines are coupled to a rotating head of the fabrication system. The invention eliminates the need to provide additional slack in the feed lines to accommodate head rotation, and therefore reduces feed line bending movements which induce non-uniform feeding of gas entrained powder to a rotating head.

Growth and reproductive performance by different feed types in fresh water angelfish (Pterophyllum scalare Schultze, 1823)

PubMed Central

Kasiri, Milad; Farahi, Amin; Sudagar, Mohammad

2012-01-01

It is well established that reproduction is sensitive to the state of energy reserves, and that there is a balance between energy homeostasis and fertility. In this view, this study examined the effects of different diets on growth and reproductive performance of fresh water angelfish. Twenty four pairs of angelfish (weighing 3.58 ± 0.24 g) were fed with four types of diets including live earth worm (LEW), dried Tubifex (DT), dried Gammarus (DG) and prepared granulated feed (PGF), twice a day for 90 days. Reproductive parameters were measured between days 60 and 90. The significant increase in the gonadosomatic index (GSI), fecundity and hatchability brought about by the LEW were demonstrated by the higher number of spawned eggs and hatched larvae. The best growth observed significantly in PGF, and length of larvae was enhanced in this group, consequently. The numbers of dead and deformed fry were lower in the fish fed with PGF and LEW, but there was no significant difference among experimental groups. This study showed that breeders benefit from inclusion of prepared granulated feed and living earth worm during their growth and reproductive stages, and simultaneous using of them for achieving better results is suggested. PMID:25610565

Structure-activity relationship of linear tetrapeptides Tic-DPhe-Arg-Trp-NH2 at the human melanocortin-4 receptor and effects on feeding behaviors in rat.

PubMed

Ye, Zhixiong; MacNeil, Tanya; Weinberg, David H; Kalyani, Rubana N; Tang, Rui; Strack, Alison M; Murphy, Beth A; Mosley, Ralph T; Euan MacIntyre, D; Van der Ploeg, Lex H T; Patchett, Arthur A; Wyvratt, Matthew J; Nargund, Ravi P

2005-10-01

The melanocortin subtype-4 receptor (MC4R) has been implicated in the control of feeding behavior and body weight regulation. A series of tetrapeptides, based on Tic-DPhe-Arg-Trp-NH2-a mimic of the putative message sequence "His-Phe-Arg-Trp" and modified at the DPhe position, were prepared and pharmacologically characterized for potency and selectivity. Substitution of His with Tic gave peptides with significant increases in selectivity. The effects of the substitution pattern of DPhe were investigated and it has significant influences on potency and the level of the maximum cAMP accumulation. Intracerebroventricular administration of peptide 10 induced significant inhibition of cumulative overnight food intake and feeding duration in rats.

Dietary Glutamate Supplementation Ameliorates Mycotoxin-Induced Abnormalities in the Intestinal Structure and Expression of Amino Acid Transporters in Young Pigs

PubMed Central

Wu, Miaomiao; Liao, Peng; Deng, Dun; Liu, Gang; Wen, Qingqi; Wang, Yongfei; Qiu, Wei; Liu, Yan; Wu, Xingli; Ren, Wenkai; Tan, Bie; Chen, Minghong; Xiao, Hao; Wu, Li; Li, Tiejun; Nyachoti, Charles M.; Adeola, Olayiwola; Yin, Yulong

2014-01-01

The purpose of this study was to investigate the hypothesis that dietary supplementation with glutamic acid has beneficial effects on growth performance, antioxidant system, intestinal morphology, serum amino acid profile and the gene expression of intestinal amino acid transporters in growing swine fed mold-contaminated feed. Fifteen pigs (Landrace×Large White) with a mean body weight (BW) of 55 kg were randomly divided into control group (basal feed), mycotoxin group (contaminated feed) and glutamate group (2% glutamate+contaminated feed). Compared with control group, mold-contaminated feed decreased average daily gain (ADG) and increased feed conversion rate (FCR). Meanwhile, fed mold-contaminated feed impaired anti-oxidative system and intestinal morphology, as well as modified the serum amino acid profile in growing pigs. However, supplementation with glutamate exhibited potential positive effects on growth performance of pigs fed mold-contaminated feed, ameliorated the imbalance antioxidant system and abnormalities of intestinal structure caused by mycotoxins. In addition, dietary glutamate supplementation to some extent restored changed serum amino acid profile caused by mold-contaminated feed. In conclusion, glutamic acid may be act as a nutritional regulating factor to ameliorate the adverse effects induced by mycotoxins. PMID:25405987

40 CFR 63.11623 - What are the testing requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the cyclone, dry basis, corrected to standard conditions, g/min; MOUTLET = Mass of particulate... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Area Sources: Prepared Feeds...

Portable System for Field-feeding Greywater Remediation and Recycling

DTIC Science & Technology

2007-03-01

for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that...system to remediate and recycle dirty sink water from its field feeding and sanitation operations . A greywater recycling system is expected to reduce...two weeks and each of the three systems was operated out-of doors treating water created during actual field feeding operations . Water samples were

RF optics study for DSS-43 ultracone implementation

NASA Technical Reports Server (NTRS)

Lee, P.; Veruttipong, W.

1994-01-01

The Ultracone feed system will be implemented on DSS 43 to support the S-band (2.3 GHz) Galileo contingency mission. The feed system will be installed in the host country's cone, which is normally used for radio astronomy, VLBI, and holography. The design must retain existing radio-astronomy capabilities, which could be impaired by shadowing from the large S-band feed horn. Computer calculations were completed to estimate system performance and shadowing effects for various configurations of the host country's cone feed systems. Also, the DSS-43 system performance using higher gain S-band horns was analyzed. A new S-band horn design with improved return loss and cross-polarization characteristics is presented.

Feeding response of Ips paraconfusus to phloem and phloem metabolites of Heterobasidion annosum-inoculated ponderosa pine, Pinus ponderosa.

PubMed

McNee, William R; Bonello, Pierluigi; Storer, Andrew J; Wood, David L; Gordon, Thomas R

2003-05-01

In studies of feeding by the bark beetle, Ips paraconfusus, two pine stilbenes (pinosylvin and pinosylvin methyl ether), ferulic acid glucoside, and enantiomers of the four most common sugars present in ponderosa pine phloem (sucrose, glucose, fructose, and raffinose) did not stimulate or reduce male feeding when assayed on wet alpha-cellulose with or without stimulatory phloem extractives present. When allowed to feed on wet alpha-cellulose containing sequential extracts (hexane, methanol, and water) of ponderosa pine phloem, methanol and water extractives stimulated feeding, but hexane extractives did not. Males confined in wet alpha-cellulose containing aqueous or organic extracts of culture broths derived from phloem tissue and containing the root pathogen. Heterobasidion annosum, ingested less substrate than beetles confined to control preparations. In an assay using logs from uninoculated ponderosa pines, the mean lengths of phloem in the digestive tracts increased as time spent feeding increased. Males confined to the phloem of basal logs cut from ponderosa pines artificially inoculated with H. annosum ingested significantly less phloem than beetles in logs cut from trees that were (combined) mock-inoculated or uninoculated and did not contain the pathogen. However, individual pathogen-containing treatments were not significantly different from uninoculated controls. It was concluded that altered feeding rates are not a major factor which may explain why diseased ponderosa pines are colonized by I. paraconfusus.

The Dilemmas of the Gourmet Fly: The Molecular and Neuronal Mechanisms of Feeding and Nutrient Decision Making in Drosophila

PubMed Central

Itskov, Pavel M.; Ribeiro, Carlos

2012-01-01

To survive and successfully reproduce animals need to maintain a balanced intake of nutrients and energy. The nervous system of insects has evolved multiple mechanisms to regulate feeding behavior. When animals are faced with the choice to feed, several decisions must be made: whether or not to eat, how much to eat, what to eat, and when to eat. Using Drosophila melanogaster substantial progress has been achieved in understanding the neuronal and molecular mechanisms controlling feeding decisions. These feeding decisions are implemented in the nervous system on multiple levels, from alterations in the sensitivity of peripheral sensory organs to the modulation of memory systems. This review discusses methodologies developed in order to study insect feeding, the effects of neuropeptides and neuromodulators on feeding behavior, behavioral evidence supporting the existence of internal energy sensors, neuronal and molecular mechanisms controlling protein intake, and finally the regulation of feeding by circadian rhythms and sleep. From the discussed data a conceptual framework starts to emerge which aims to explain the molecular and neuronal processes maintaining the stability of the internal milieu. PMID:23407678

Low-loss off-axis feeds for symmetric dual-reflector antennas

NASA Technical Reports Server (NTRS)

Veruttipong, T.; Galindo-Israel, V.; Imbriale, W.

1986-01-01

Circularly symmetric, dual reflector, high gain antenna systems often require feeds placed off the system's axis because of the need for multiple feeds to use the reflector antenna. Also, the constraint requiring the hyperboloid or shaped subreflector to remain circularly symmetric is sometimes added. In a Cassegrainian system, the subreflector and feed may be rotated off axis around the paraboloid focus and retain main reflector focusing. However, substantial spillover results in considerable noise with a high gain/low noise temperature system. In a shaped system, the tilt of the shaped subreflector and feed together results in substantial defocusing as well as spillover noise. If the subreflector is tilted approximately one-half the angle of the feed tilt in either the Cassegrainian or the dual shaped reflector antenna, it is found that spillover and noise are substantially reduced with tolerable defocusing. An extensive numerical analysis of these effects was conducted to determine the characteristics of a planned 70-meter, dual shaped reflector versus Cassegrainian antenna and to gain some understanding of the cause of the observed effects.

Antibody expressing pea seeds as fodder for prevention of gastrointestinal parasitic infections in chickens.

PubMed

Zimmermann, Jana; Saalbach, Isolde; Jahn, Doreen; Giersberg, Martin; Haehnel, Sigrun; Wedel, Julia; Macek, Jeanette; Zoufal, Karen; Glünder, Gerhard; Falkenburg, Dieter; Kipriyanov, Sergey M

2009-09-11

Coccidiosis caused by protozoans of genus Eimeria is a chicken parasitic disease of great economical importance. Conventional disease control strategies depend on vaccination and prophylactic use of anticoccidial drugs. Alternative solution to prevent and treat coccidiosis could be provided by passive immunization using orally delivered neutralizing antibodies. We investigated the possibility to mitigate the parasitic infection by feeding poultry with antibody expressing transgenic crop seeds. Using the phage display antibody library, we generated a panel of anti-Eimeria scFv antibody fragments with high sporozoite-neutralizing activity. These antibodies were expressed either transiently in agrobacteria-infiltrated tobacco leaves or stably in seeds of transgenic pea plants. Comparison of the scFv antibodies purified either from tobacco leaves or from the pea seeds demonstrated no difference in their antigen-binding activity and molecular form compositions. Force-feeding experiments demonstrated that oral delivery of flour prepared from the transgenic pea seeds had higher parasite neutralizing activity in vivo than the purified antibody fragments isolated from tobacco. The pea seed content was found to protect antibodies against degradation by gastrointestinal proteases (>100-fold gain in stability). Ad libitum feeding of chickens demonstrated that the transgenic seeds were well consumed and not shunned. Furthermore, feeding poultry with shred prepared from the antibody expressing pea seeds led to significant mitigation of infection caused both by high and low challenge doses of Eimeria oocysts. The results suggest that our strategy offers a general approach to control parasitic infections in production animals using cost-effective antibody expression in crop seeds affordable for the animal health market.

Microbiological quality of complementary foods and its association with diarrhoeal morbidity and nutritional status of Bangladeshi children.

PubMed

Islam, M A; Ahmed, T; Faruque, A S G; Rahman, S; Das, S K; Ahmed, D; Fattori, V; Clarke, R; Endtz, H P; Cravioto, A

2012-11-01

To examine the bacteriological quality of complementary foods (CF) and to correlate the results with diarrhoeal morbidity and nutritional status of Bangladeshi children aged 6-24 months. A total of 212 CF samples were tested, of which 72 were collected immediately before the first time of feeding (≤ 1 h of food preparation) and 140 were collected at second/third time of feeding from 140 households located in urban and rural areas of Bangladesh. Anthropometry, food frequency data and demographic information of the children were collected. Of the first time feeding samples, 3% from each of urban and rural areas were found to be contaminated with faecal coliforms (FC) at ≥ 100 CFU/g. E. coli was isolated from 11% and 6% of samples, and B. cereus from 8% and 6% of samples from urban and rural areas, respectively. In contrast, 33% of the second/third time feeding samples from urban areas and 19% from rural areas were contaminated with FC at ≥ 100 CFU/g (P<0.05). E. coli was isolated from 40% and 39% of samples, and B. cereus from 33% and 26% of samples from urban and rural areas, respectively. Significantly high numbers of wasted rural children had CF with a high aerobic plate count, which was also significantly associated with diarrhoeal morbidity in children. Around 40% of CF samples were contaminated with E. coli, which was mainly attributable to food preparation practices. Consumption of contaminated CF appeared to be associated with a higher frequency of diarrhoea and malnutrition in children.

Antibody expressing pea seeds as fodder for prevention of gastrointestinal parasitic infections in chickens

PubMed Central

Zimmermann, Jana; Saalbach, Isolde; Jahn, Doreen; Giersberg, Martin; Haehnel, Sigrun; Wedel, Julia; Macek, Jeanette; Zoufal, Karen; Glünder, Gerhard; Falkenburg, Dieter; Kipriyanov, Sergey M

2009-01-01

Background Coccidiosis caused by protozoans of genus Eimeria is a chicken parasitic disease of great economical importance. Conventional disease control strategies depend on vaccination and prophylactic use of anticoccidial drugs. Alternative solution to prevent and treat coccidiosis could be provided by passive immunization using orally delivered neutralizing antibodies. We investigated the possibility to mitigate the parasitic infection by feeding poultry with antibody expressing transgenic crop seeds. Results Using the phage display antibody library, we generated a panel of anti-Eimeria scFv antibody fragments with high sporozoite-neutralizing activity. These antibodies were expressed either transiently in agrobacteria-infiltrated tobacco leaves or stably in seeds of transgenic pea plants. Comparison of the scFv antibodies purified either from tobacco leaves or from the pea seeds demonstrated no difference in their antigen-binding activity and molecular form compositions. Force-feeding experiments demonstrated that oral delivery of flour prepared from the transgenic pea seeds had higher parasite neutralizing activity in vivo than the purified antibody fragments isolated from tobacco. The pea seed content was found to protect antibodies against degradation by gastrointestinal proteases (>100-fold gain in stability). Ad libitum feeding of chickens demonstrated that the transgenic seeds were well consumed and not shunned. Furthermore, feeding poultry with shred prepared from the antibody expressing pea seeds led to significant mitigation of infection caused both by high and low challenge doses of Eimeria oocysts. Conclusion The results suggest that our strategy offers a general approach to control parasitic infections in production animals using cost-effective antibody expression in crop seeds affordable for the animal health market. PMID:19747368

How Does the United States Rank According to the World Breastfeeding Trends Initiative?

PubMed

Cadwell, Karin; Turner-Maffei, Cynthia; Blair, Anna; Brimdyr, Kajsa; OʼConnor, Barbara

The World Breastfeeding Trends Initiative is an assessment process designed to facilitate an ongoing national appraisal of progress toward the goals of the United Nations Children's Fund (UNICEF)/World Health Organization (WHO) Global Strategy for Infant and Young Child Feeding. More than 80 countries have completed this national assessment, including the United States of America. This article describes the process undertaken by the US World Breastfeeding Trends Initiative team, the findings of the expert panel related to infant and young child feeding policies, programs, and practices and the ranking of the United States compared with the 83 other participating nations. Identified strengths of the United States include data collection and monitoring, especially by the Centers for Disease Control and Prevention, the US Baby-Friendly Hospital Initiative, and the United States Breastfeeding Committee. The absence of a national infant feeding policy, insufficient maternity protection, and lack of preparation for infant and young children feeding in emergencies are key targets identified by the assessment requiring concerted national effort.

Breast-feeding: the role of multinational corporations in Latin America.

PubMed

Bader, M B

1976-01-01

The decline in birthrates in the developed countries of the world has forced multinational corporations engaged in the production of infant formula to seek out new markets in the developing countries, where burgeoning population rates potentially guarantee the long-term profitability of these corporations. This development, ostensibly benign and nutritionally advantageous to infants in developing countries, has serious public health consequences, due to the high relative cost of purchased formula and the paucity of hygienic facilities essential to the sterile preparation of bottle formula. This paper delineates in detail economic and contraceptive advantages of breast-feeding, and examines the role of health personnel and multinational advertising techniques which have catalyzed the decline in breast-feeding. In addition, the paper focuses on the question of cultural imperialism and current efforts to regulate the multinational firms through both United Nations groups and stock-holders' suits. Finally, some suggestions are made concerning ameliorative public policy approaches to the breast-feeding controversy.

Purification and characterization of antifungal compounds from Lactobacillus plantarum HD1 isolated from kimchi.

PubMed

Ryu, Eun Hye; Yang, Eun Ju; Woo, Eun Rhan; Chang, Hae Choon

2014-08-01

Strain HD1 with antifungal activity was isolated from kimchi and identified as Lactobacillus plantarum. Antifungal compounds from Lb. plantarum HD1 were active against food- and feed-borne filamentous fungi and yeasts in a spot-on-the-lawn assay. Antifungal activity of Lb. plantarum HD1 was stronger against filamentous fungi than yeast. Antifungal compounds were purified using solid phase extraction (SPE) and recycling preparative-HPLC. Structures of the antifungal compounds were elucidated by electrospray ionization-mass spectrometry and nuclear magnetic resonance. Active compounds from Lb. plantarum HD1 were identified as 5-oxododecanoic acid (MW 214), 3-hydroxy decanoic acid (MW 188), and 3-hydroxy-5-dodecenoic acid (MW 214). To investigate the potential application of these antifungal compounds for reduction of fungal spoilage in foods, Korean draft rice wine was used as a food model. White film-forming yeasts were observed in control draft rice wine after 11 days of incubation. However, film-forming yeasts were not observed in draft rice wine treated with SPE-prepared culture supernatant of Lb. plantarum HD1 (equivalent to 2.5% addition of culture supernatant) until 27 days of incubation. The addition of antifungal compounds to Korean draft rice wine extended shelf-life up to 27 days at 10 °C without any sterilization process. Therefore, the antifungal activity of Lb. plantarum HD1 may lead to the development of powerful biopreservative systems capable of preventing food- and feed-borne fungal spoilage. Copyright © 2014 Elsevier Ltd. All rights reserved.

Space shuttle/food system study. Volume 2, Appendix G: Ground support system analysis. Appendix H: Galley functional details analysis

NASA Technical Reports Server (NTRS)

1974-01-01

The capabilities for preflight feeding of flight personnel and the supply and control of the space shuttle flight food system were investigated to determine ground support requirements; and the functional details of an onboard food system galley are shown in photographic mockups. The elements which were identified as necessary to the efficient accomplishment of ground support functions include the following: (1) administration; (2) dietetics; (3) analytical laboratories; (4) flight food warehouse; (5) stowage module assembly area; (6) launch site module storage area; (7) alert crew restaurant and disperse crew galleys; (8) ground food warehouse; (9) manufacturing facilities; (10) transport; and (11) computer support. Each element is discussed according to the design criteria of minimum cost, maximum flexibility, reliability, and efficiency consistent with space shuttle requirements. The galley mockup overview illustrates the initial operation configuration, food stowage locations, meal assembly and serving trays, meal preparation configuration, serving, trash management, and the logistics of handling and cleanup equipment.

21 CFR 520.1807 - Piperazine.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... in drinking water or feed. Use as sole source of drinking water. Prepare fresh solution daily. Use as... for human consumption. Consult your veterinarian for assistance in the diagnosis, treatment, and...

Attachment Parenting: A Style That Works.

ERIC Educational Resources Information Center

Sears, William

1995-01-01

Discusses the benefits of attachment parenting, which emphasizes parental commitment, a low-stress pregnancy, childbirth preparation, breast-feeding with child-led weaning, prompt response to the baby's crying, flexible sleeping arrangements, close-knit father-mother-baby functioning, and the avoidance of detachment parenting. Attachment parenting…

Mailing microscope slides

USDA-ARS?s Scientific Manuscript database

Many insects feed agriculturally important crops, trees, and ornamental plants and cause millions of dollars of damage annually. Identification for some of these require the preparation of a microscope slide for examination. There are times when a microscope slide may need to be sent away to a speci...

Method of preparing and handling chopped plant materials

DOEpatents

Bransby, David I.

2002-11-26

The method improves efficiency of harvesting, storage, transport, and feeding of dry plant material to animals, and is a more efficient method for harvesting, handling and transporting dry plant material for industrial purposes, such as for production of bioenergy, and composite panels.

75 FR 43495 - Sunshine Act Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-26

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD Sunshine Act Notice AGENCY: Defense Nuclear Facilities..., structures, and components, and (5) safety-related design aspects of new facilities or modifications of existing facilities needed to deliver high-level waste feed. The Board will be prepared to accept any other...

Liquid Propulsion: Propellant Feed System Design. Chapter 2.3.11

NASA Technical Reports Server (NTRS)

Cannon, James L.

2010-01-01

The propellant feed system of a liquid rocket engine determines how the propellants are delivered from the tanks to the thrust chamber. They are generally classified as either pressure fed or pump fed. The pressure-fed system is simple and relies on tank pressures to feed the propellants into the thrust chamber. This type of system is typically used for space propulsion applications and auxiliary propulsion applications requiring low system pressures and small quantities of propellants. In contrast, the pump-fed system is used for high pressure, high performance applications. The selection of one propellant feed system over another is determined based on design trade studies at both the engine and vehicle levels. This chapter first provides a brief overview of the basic configurations of pressure-fed systems. Pump-fed systems are then discussed with greater detail given to the turbomachinery design. Selected design requirements and configurations are provided.

Preparation of different types of miso with mixture of starters and their effects on endogenous antioxidant of liver and kidney of mice.

PubMed

El-Shenawy, N S; Abu Zaid, A; Amin, G A

2012-02-01

The present study was undertaken to evaluate the effects of feeding the male mice with miso that was prepared with a mixture of microbial starters on the level of lipid peroxidation as a marker of oxidative stress, antioxidant power of hepatocytes, the enzymatic and non-enzymatic antioxidant. The starters that were used in the preparation of miso were Aspergillus oryzae and Pleurotus ostreaus or A. oryzae and Bacillus subtilis. The miso that was prepared with A. oryzae and Bacillus subtilis has more effect on suppressing the oxidative stress and enhancement of endogenous antioxidant of hepatocytes and renal tissue of mice. © 2011 Blackwell Verlag GmbH.

Development of an Ointment Formulation Using Hot-Melt Extrusion Technology.

PubMed

Bhagurkar, Ajinkya M; Angamuthu, Muralikrishnan; Patil, Hemlata; Tiwari, Roshan V; Maurya, Abhijeet; Hashemnejad, Seyed Meysam; Kundu, Santanu; Murthy, S Narasimha; Repka, Michael A

2016-02-01

Ointments are generally prepared either by fusion or by levigation methods. The current study proposes the use of hot-melt extrusion (HME) processing for the preparation of a polyethylene glycol base ointment. Lidocaine was used as a model drug. A modified screw design was used in this process, and parameters such as feeding rate, barrel temperature, and screw speed were optimized to obtain a uniform product. The product characteristics were compared with an ointment of similar composition prepared by conventional fusion method. The rheological properties, drug release profile, and texture characteristics of the hot-melt extruded product were similar to the conventionally prepared product. This study demonstrates a novel application of the hot-melt extrusion process in the manufacturing of topical semi-solids.

TJC: plan and prepare for the transition to new tubing connectors to minimize the risk of dangerous misconnections, clinician frustration.

PubMed

2014-12-01

To reduce the risk of dangerous tubing misconnections, the ISO is rolling out new tubing connector standards that will eventually make it nearly impossible for tubing associated with one delivery system to be connected to a delivery system that serves a different purpose. Experts welcome the change, noting that tubing misconnections that cause injury and even death have been happening for years. However, TJC has issued a Sentinel Event Alert, warning that health care organizations need to be vigilant in managing the risk posed by these misconnections during the phased-in transition to the new connectors. Experts explain that tubing misconnections occur because many different types of tubing utilize the same Leur connector, making it possible for a clinician to mistakenly connect a tube to the wrong delivery system. The most common type of tubing misconnection reported to the ISMP is when a clinician wants to administer something to a patient through a feeding tube, but accidently administers the substance through an IV tube instead. The first new connector, called the ENFit, is going to be for enteral feeding tubes. It will not connect to IV tubing, making that type of misconnection unlikely. The new connector should be available early next year. Since hospitals will continue to use older tubing until their supplies are exhausted, manufacturers will temporarily provide adapters capable of making new administration sets compatible with older tubing.

Integrating diverse forage sources reduces feed gaps on mixed crop-livestock farms.

PubMed

Bell, L W; Moore, A D; Thomas, D T

2017-12-04

Highly variable climates induce large variability in the supply of forage for livestock and so farmers must manage their livestock systems to reduce the risk of feed gaps (i.e. periods when livestock feed demand exceeds forage supply). However, mixed crop-livestock farmers can utilise a range of feed sources on their farms to help mitigate these risks. This paper reports on the development and application of a simple whole-farm feed-energy balance calculator which is used to evaluate the frequency and magnitude of feed gaps. The calculator matches long-term simulations of variation in forage and metabolisable energy supply from diverse sources against energy demand for different livestock enterprises. Scenarios of increasing the diversity of forage sources in livestock systems is investigated for six locations selected to span Australia's crop-livestock zone. We found that systems relying on only one feed source were prone to higher risk of feed gaps, and hence, would often have to reduce stocking rates to mitigate these risks or use supplementary feed. At all sites, by adding more feed sources to the farm feedbase the continuity of supply of both fresh and carry-over forage was improved, reducing the frequency and magnitude of feed deficits. However, there were diminishing returns from making the feedbase more complex, with combinations of two to three feed sources typically achieving the maximum benefits in terms of reducing the risk of feed gaps. Higher stocking rates could be maintained while limiting risk when combinations of other feed sources were introduced into the feedbase. For the same level of risk, a feedbase relying on a diversity of forage sources could support stocking rates 1.4 to 3 times higher than if they were using a single pasture source. This suggests that there is significant capacity to mitigate both risk of feed gaps at the same time as increasing 'safe' stocking rates through better integration of feed sources on mixed crop-livestock farms across diverse regions and climates.

77 FR 6112 - Notice of Final National Pollutant Discharge Elimination System (NPDES) General Permit for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

... Elimination System (NPDES) General Permit for Discharges From Concentrated Animal Feeding Operations (CAFOs... permit for discharges from eligible owners/operators of concentrated animal feeding operations (CAFOs... of the final permit, animal feeding operations that are defined as CAFOs or designated as CAFOs by...

Evaluation of commercial marine fish feeds for production of juvenile cobia in recirculating aquaculture systems

USDA-ARS?s Scientific Manuscript database

The effect of feeding three commercially available diets manufactured by three U.S. feed companies on production characteristics and body composition of juvenile cobia Rachycentron canadum reared in recirculating aquaculture systems (RAS) was evaluated in a 57 d growth trial. Juvenile cobia (26.7 +...

40 CFR 63.605 - Monitoring requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the mass flow of phosphorus-bearing feed material to the process. The monitoring system shall have an... either the mass flow of phosphorus-bearing feed material to the dryer or calciner, or the mass flow of... total mass rate in metric ton/hour of phosphorus bearing feed using a monitoring system for measuring...

40 CFR 63.605 - Monitoring requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the mass flow of phosphorus-bearing feed material to the process. The monitoring system shall have an... either the mass flow of phosphorus-bearing feed material to the dryer or calciner, or the mass flow of... total mass rate in metric ton/hour of phosphorus bearing feed using a monitoring system for measuring...

Blood feeding of Ornithodoros turicata larvae using an artificial membrane system

USDA-ARS?s Scientific Manuscript database

An artificial membrane system was adapted to feed Ornithodoros turicata larvae from a laboratory colony using defibrinated swine blood. Aspects related to larval feeding and molting to the 1st nymphal instar were evaluated. Fifty-five percent of all larvae exposed to the artificial membrane in two e...

Cascaded recompression closed brayton cycle system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pasch, James J.

The present disclosure is directed to a cascaded recompression closed Brayton cycle (CRCBC) system and method of operation thereof, where the CRCBC system includes a compressor for compressing the system fluid, a separator for generating fluid feed streams for each of the system's turbines, and separate segments of a heater that heat the fluid feed streams to different feed temperatures for the system's turbines. Fluid exiting each turbine is used to preheat the fluid to the turbine. In an embodiment, the amount of heat extracted is determined by operational costs.

Cascaded recompression closed Brayton cycle system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pasch, James Jay

The present disclosure is directed to a cascaded recompression closed Brayton cycle (CRCBC) system and method of operation thereof, where the CRCBC system includes a compressor for compressing the system fluid, a separator for generating fluid feed streams for each of the system's turbines, and separate segments of a heater that heat the fluid feed streams to different feed temperatures for the system's turbines. Fluid exiting each turbine is used to preheat the fluid to the turbine. In an embodiment, the amount of heat extracted is determined by operational costs.

Engineering Support for the Development of a Submersible Fish Cage for Open Ocean Aquaculture

DTIC Science & Technology

2007-01-01

32 Appendix B: Feed Hose Buoy Components ................................................................. 33...ballasting systems (for test purposes) located in the upper rim section and airlift. Another component of the system includes a feed hose buoy used...to deliver pellets to fish in the cage while the system is submerged. Since the feed hose buoy was not critical in the development of the fish

Development, Demonstration, and Analysis of an Integrated Iodine Hall Thruster Feed System

NASA Technical Reports Server (NTRS)

Polzin, Kurt A.; Peeples, Steven R.; Burt, Adam O.; Martin, Adam K.; Martinez, Armando; Seixal, Joao F.; Mauro, Stephanie

2016-01-01

The design of an in-space iodine-vapor-fed Hall effect thruster propellant management system is described. The solid-iodine propellant tank has unique issues associated with the microgravity environment, requiring a solution where the iodine is maintained in intimate thermal contact with the heated tank walls. The flow control valves required alterations from earlier iterations to survive for extended periods of time in the corrosive iodine-vapor environment. Materials have been selected for the entire feed system that can chemically resist the iodine vapor, with the design now featuring Hastelloy or Inconel for almost all the wetted components. An integrated iodine feed system/Hall thruster demonstration unit was fabricated and tested, with all control being handled by an onboard electronics card specifically designed to operate the feed system. Structural analysis shows that the feed system can survive launch loads after the implementation of some minor reinforcement. Flow modeling, while still requiring significant additional validation, is presented to show its potential in capturing the behavior of components in this low-flow, low-pressure system.

Effects of two commercial diets and technical feed treatment on stomach lesions and immune system of fattening pigs.

PubMed

Liermann, W; Berk, A; Frahm, J; Böschen, V; Dänicke, S

2017-10-01

The impact of technical feed treatment and diet on stomach lesions and traits of the local and systemic immune system were investigated in fattening pigs. Feeding groups differed in technical feed treatment (standard ground meal vs. finely ground and pelleted feed) and diet (soya bean meal vs. rapeseed meal/DDGS/soya beans). Pigs were fattened approximately 10 weeks by ad libitum feeding and slaughtered subsequently. Gastric alterations were assessed by a macroscopic scoring system [macroscopic stomach score (MSC) 0 =  normal to 4 =  severe lesions]. For immunological investigations, lymphocytes from blood and jejunal tissues were isolated. T-cell phenotyping was carried out by staining intestinal lymphocytes with monoclonal antibodies for CD4 and CD8 and flow cytometric measurements. MSC was higher in animals fed finely ground and pelleted feed compared with their counterparts. Significant interactions between diet and feed treatment considering the MSC were observed (p = 0.027). There was no effect of diet or technical feed treatment on T cells of blood, Lymphonodi gastrici or lamina propria (LP) and intraepithelial cells. However, technical feed treatment significantly affected subsets of CD4 + , CD8 + , CD8 low , CD4/CD8 double-positive T cells, the mean fluorescence intensity of CD4 + T cells and the ratio of CD8 low /CD8 high T cells in Peyer's patches (PP). All named parameters were reduced in PP of animals fed finely ground and pelleted feed compared with animals fed standard ground meal. Furthermore, significant differences between T cells of lymph nodes and LP were observed between animals with middle MSC (MSC = 1-2.5) and animals with high MSC (MSC = 3-4). Significant alterations in T cells of PP were observed between animals of low (MSC = 0-0.5) and high MSC. The observed effects provide the evidence that the impact of technical feed treatment is not limited on the stomach lesions. Possible stimuli and consequences of the immune system should be studied in more detail. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

Collaborative study on the effect of grinding on the detection of bones from processed animal proteins in feed by light microscopy.

PubMed

Veys, Pascal; Planchon, Viviane; Colbert, Ruairi; Cruz, Clara; Frick, Geneviève; Ioannou, Ioannis; Marchis, Daniela; Nordkvist, Erik; Paradies-Severin, Inge; Pohto, Arja; Weiss, Roland; Baeten, Vincent; Berben, Gilbert

2017-08-01

Bone fragments are essential structures for the detection of processed animal proteins (PAPs) in feed by light microscopy for official controls according to Annex VI of European Union Regulation EC/152/2009. The preparation of samples submitted for analysis requires a grinding step to make them suitable for microscopic slide preparation and observation. However, there are no technical guidelines set down for this step despite the fact that it can lead to an increase in bone numbers due to fragmentation. This was demonstrated by an in-house study carried out by the Irish National Reference Laboratory (NRL) for animal protein detection. The present collaborative study investigated the possible effects of three different grinding conditions on the final result for a feed adulterated with 0.05 and 0.01% (w/w) of PAP. The microscopic analysis either combined or not with an Alizarin Red staining was carried out by 10 different laboratories. The results demonstrated that although a large variation in the numbers of bone fragments was noted, five of the six different grinding/staining combinations applied at two levels of PAP adulteration did not significantly (at p = 0.05) differ from one another. The only exception occurred when grinding the feed containing 0.05% of PAP with a rotor mill equipped with a 0.5-mm sieve and combined with a staining which resulted in a greater number of bone fragments by forced fragmentation. Overall, the impact of the grinding/staining combinations on the final results was shown to be negligible when considering the regulatory limit of detection (LOD) requirement for the method and the current rules of implementation of the light microscopic method. From a total of 180 analyses carried out on the feed matrix containing 0.05% of PAP no false-negative result was observed, and at a level of 0.01% PAP only 10 false-negative results occurred.

Breast milk is the best.

PubMed

Saroja, K

1981-02-01

Throughout the world, the concept that the best milk is breast milk is gaining momentum from ever increasing supportive scientific evidence. In India the average mother even with her poor nutritional status has the ability to breastfeed her infant for prolonged periods, sometimes extending to nearly 2 years. Human milk generally forms the only source of dietary protein for poor Indian infants, and the nutritional status of poor infants and children would be much worse than what it is today if not for breast milk. The positive economic and health implications of breast milk are obvious; it is the most hygienic, safest, and suitable nourishment a mother can provide for her infant. Recently, there has been an unfortunate trend toward artificial feeding among the average Indian mother. This practice is spreading among rural mothers and mothers of low socioeconomic groups. Due to poverty and ignorance many mothers neither can prepare the artificial milk feeding formula hygienically nor feed their children well, and the children are not only deprived of essential nutrients but are exposed to unnecessary intestinal infections introduced through unsterilized bottles and nipples. The Protein Advisory Group of the UN has warned against early abandonment of breastfeeding, particularly in poor families, as devastating to the health and survival of infants. The practice of artificial feeding also has adverse economic implications. The expenditure incurred in the processing, packing, distributing, preparing, and refrigerating cow's milk is enormous and one that a developing country like India cannot afford. Breast feeding also has the advantage of a certain amount of contraceptive effect. Generalizations for the promotion of breastfeeding include the following: 1) unsupplemented human milk is all that is needed to sustain growth and good nutrition for the first 6 months of life; 2) the volume and composition of human milk among poor women is surprisingly good despite their low nutrition status; and 3) limited studies have suggested that improvement in both the quantity and quality of breast milk is feasible. Modifications that should be made in health services are outlined.

Technicians complete foaming around Atlantis', OV-104, 17" ET feed line

NASA Image and Video Library

1990-07-10

Technicians complete foaming around the area of Atlantis, Orbiter Vehicle (OV) 104, 17 inch diameter external tank (ET) feed line in preparation for the second liquid hydrogen tanking test at the Kennedy Space Center (KSC). An elaborate network of sensors, leak detectors, and baggies were set up on OV-104 by technicians. Engineers hope this extra instrumentation will help pinpoint the exact location of the leak. OV-104 is scheduled to be launched for the STS-38 mission, a classified Department of Defense (DOD) flight. View provided by KSC with alternate number KSC-90PC-988.

Technicians complete foaming around Atlantis', OV-104, 17' ET feed line

NASA Technical Reports Server (NTRS)

1990-01-01

Technicians complete foaming around the area of Atlantis, Orbiter Vehicle (OV) 104, 17 inch diameter external tank (ET) feed line in preparation for the second liquid hydrogen tanking test at the Kennedy Space Center (KSC). An elaborate network of sensors, leak detectors, and baggies were set up on OV-104 by technicians. Engineers hope this extra instrumentation will help pinpoint the exact location of the leak. OV-104 is scheduled to be launched for the STS-38 mission, a classified Department of Defense (DOD) flight. View provided by KSC with alternate number KSC-90PC-988.

Orbital maneuvering engine feed system coupled stability investigation

NASA Technical Reports Server (NTRS)

Kahn, D. R.; Schuman, M. D.; Hunting, J. K.; Fertig, K. W.

1975-01-01

A digital computer model used to analyze and predict engine feed system coupled instabilities over a frequency range of 10 to 1000 Hz was developed and verified. The analytical approach to modeling the feed system hydrodynamics, combustion dynamics, chamber dynamics, and overall engineering model structure is described and the governing equations in each of the technical areas are presented. This is followed by a description of the generalized computer model, including formulation of the discrete subprograms and their integration into an overall engineering model structure. The operation and capabilities of the engineering model were verified by comparing the model's theoretical predictions with experimental data from an OMS-type engine with a known feed system/engine chugging history.

78 FR 27402 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-10

... Request; Medicated Feed Mill License Application; Extension AGENCY: Food and Drug Administration, HHS... review and clearance. Medicated Feed Mill Licensing Application--21 CFR Part 515 (OMB Control Number 0910... medicated feed with a general licensing system for feed mills. Before passage of the ADAA, medicated feed...

46 CFR 56.50-30 - Boiler feed piping.

Code of Federal Regulations, 2013 CFR

2013-10-01

... APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-30 Boiler feed piping. (a) General... paragraph (d) or (e) of this section. (2) Feed pump supply to power boilers may utilize the group feed... required stop and stop-check valves, shall be designed for either the feed pump relief valve setting or the...

46 CFR 56.50-30 - Boiler feed piping.

Code of Federal Regulations, 2012 CFR

2012-10-01

... APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-30 Boiler feed piping. (a) General... paragraph (d) or (e) of this section. (2) Feed pump supply to power boilers may utilize the group feed... required stop and stop-check valves, shall be designed for either the feed pump relief valve setting or the...

Fuzzy logic feedback control for fed-batch enzymatic hydrolysis of lignocellulosic biomass.

PubMed

Tai, Chao; Voltan, Diego S; Keshwani, Deepak R; Meyer, George E; Kuhar, Pankaj S

2016-06-01

A fuzzy logic feedback control system was developed for process monitoring and feeding control in fed-batch enzymatic hydrolysis of a lignocellulosic biomass, dilute acid-pretreated corn stover. Digested glucose from hydrolysis reaction was assigned as input while doser feeding time and speed of pretreated biomass were responses from fuzzy logic control system. Membership functions for these three variables and rule-base were created based on batch hydrolysis data. The system response was first tested in LabVIEW environment then the performance was evaluated through real-time hydrolysis reaction. The feeding operations were determined timely by fuzzy logic control system and efficient responses were shown to plateau phases during hydrolysis. Feeding of proper amount of cellulose and maintaining solids content was well balanced. Fuzzy logic proved to be a robust and effective online feeding control tool for fed-batch enzymatic hydrolysis.

Impact of selection for residual feed intake on production traits and behavior of mule ducks.

PubMed

Drouilhet, L; Monteville, R; Molette, C; Lague, M; Cornuez, A; Canario, L; Ricard, E; Gilbert, H

2016-09-01

A divergent selection experiment of Muscovy sires based on the residual feed intake (RFI) of their male mule progeny was initiated in 2009. Using electronic feeders, the aim of this study was to establish whether 3 generations of selection for RFI had an impact on feeding behavior traits and general behavior, and to examine its effect on liver and meat quality. Eighty mule ducks, issued from 8 Muscovy drakes per line with extreme RFI, were tested in a pen equipped with 4 electronic feeders. Feeding behaviors were recorded from 3 to 7 wk after hatching under ad libitum feeding conditions. Then animals were prepared for overfeeding with a 3-week period of restricted feeding, and overfed during 12 d before slaughter. The RFI was significantly lower in the low RFI line than in the high RFI line (-5.4 g/d, P = 0.0005) and daily feed intake was reduced both over the entire test period (-5 g/d, P = 0.049) and on a weekly basis (P = 0.006). Weekly and total feed conversion ratios were also significantly lower (-0.08, P = 0.03 and -0.06, P = 0.01, respectively). Low RFI ducks had more frequent meals, spent as much time eating as high RFI ducks, and their feeding rate was lower when analyzed at the wk level only. Additionally no significant correlation between feed efficiency and feeding behavior traits was evidenced, indicating only limited relationships between RFI and feeding patterns. Some differences in behavioral responses to stressors (open field test combined with a test measuring the response to human presence) suggested that a lower RFI is associated with less fearfulness. Selection for RFI had no effect on liver weight and quality and a slightly deleterious impact on meat quality (decreased drip loss and L*). Finally, low RFI animals had higher body weights after restricted feeding from wk 10 to wk 12 and after overfeeding than high RFI ducks. This suggests that selection for reduced RFI until 7 wk of age increases the feed efficiency up to slaughter. © The Author 2016. Published by Oxford University Press on behalf of Poultry Science Association.

Impact of selection for residual feed intake on production traits and behavior of mule ducks

PubMed Central

Drouilhet, L.; Monteville, R.; Molette, C.; Lague, M.; Cornuez, A.; Canario, L.; Ricard, E.; Gilbert, H.

2016-01-01

A divergent selection experiment of Muscovy sires based on the residual feed intake (RFI) of their male mule progeny was initiated in 2009. Using electronic feeders, the aim of this study was to establish whether 3 generations of selection for RFI had an impact on feeding behavior traits and general behavior, and to examine its effect on liver and meat quality. Eighty mule ducks, issued from 8 Muscovy drakes per line with extreme RFI, were tested in a pen equipped with 4 electronic feeders. Feeding behaviors were recorded from 3 to 7 wk after hatching under ad libitum feeding conditions. Then animals were prepared for overfeeding with a 3-week period of restricted feeding, and overfed during 12 d before slaughter. The RFI was significantly lower in the low RFI line than in the high RFI line (−5.4 g/d, P = 0.0005) and daily feed intake was reduced both over the entire test period (−5 g/d, P = 0.049) and on a weekly basis (P = 0.006). Weekly and total feed conversion ratios were also significantly lower (−0.08, P = 0.03 and −0.06, P = 0.01, respectively). Low RFI ducks had more frequent meals, spent as much time eating as high RFI ducks, and their feeding rate was lower when analyzed at the wk level only. Additionally no significant correlation between feed efficiency and feeding behavior traits was evidenced, indicating only limited relationships between RFI and feeding patterns. Some differences in behavioral responses to stressors (open field test combined with a test measuring the response to human presence) suggested that a lower RFI is associated with less fearfulness. Selection for RFI had no effect on liver weight and quality and a slightly deleterious impact on meat quality (decreased drip loss and L*). Finally, low RFI animals had higher body weights after restricted feeding from wk 10 to wk 12 and after overfeeding than high RFI ducks. This suggests that selection for reduced RFI until 7 wk of age increases the feed efficiency up to slaughter. PMID:27333975

40 CFR 60.401 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock Plants § 60.401 Definitions. (a) Phosphate rock plant means any plant which produces or prepares phosphate rock product by any or..., calcining, and grinding. (b) Phosphate rock feed means all material entering the process unit, including...

40 CFR 60.401 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock Plants § 60.401 Definitions. (a) Phosphate rock plant means any plant which produces or prepares phosphate rock product by any or..., calcining, and grinding. (b) Phosphate rock feed means all material entering the process unit, including...

40 CFR 60.401 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock Plants § 60.401 Definitions. (a) Phosphate rock plant means any plant which produces or prepares phosphate rock product by any or..., calcining, and grinding. (b) Phosphate rock feed means all material entering the process unit, including...

40 CFR 60.401 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock Plants § 60.401 Definitions. (a) Phosphate rock plant means any plant which produces or prepares phosphate rock product by any or..., calcining, and grinding. (b) Phosphate rock feed means all material entering the process unit, including...

Infant Formula - Buying, Preparing, Storing, and Feeding

MedlinePlus

... formula in a cool, dry place with a plastic lid on top. DO NOT use outdated formula. Always wash your hands and the top of the formula container before handling. Use a clean cup to measure the water. Make the formula as directed. DO NOT water ...

Diarrhea - what to ask your doctor - child

MedlinePlus

What to ask your doctor about diarrhea - child; Loose stools - what to ask your doctor - child ... FOODS What foods can make my child's diarrhea worse? How should I prepare the foods for my child? If my child is still breastfeeding or bottle feeding, do I ...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Souza, Douglas F., E-mail: souzadf@outlook.com; Nunes, Eduardo H.M., E-mail: eduardohmn@gmail.com; Pimenta, Daiana S.

In this work we fabricated alumina samples by the freeze-casting technique using tert-butanol as the solvent. The prepared materials were examined by scanning electron microscopy and X-ray microtomography. Next, they were coated with sol–gel silica films by dip-coating. Permeability tests were carried out in order to assess the permeation behavior of the materials processed in this study. We observed that the sintering time and alumina loading showed a remarkable effect on both the structural properties and flexural strength of the freeze-cast samples. Nitrogen adsorption tests revealed that the silica prepared in this study exhibited a microporous structure. It was observedmore » that the presence of silica coatings on the alumina surface decreased the CO{sub 2} permeance by about one order of magnitude. Because of the similar kinetic diameters of nitrogen and carbon dioxide, the CO{sub 2}/N{sub 2} system showed a separation efficiency that was lower than that observed for the He/CO{sub 2} and He/N{sub 2} systems. We noticed that increasing the feed pressure improved the separation capacity of the obtained materials. - Highlights: • Porous alumina samples obtained by the freeze-casting technique • Microporous silica coating prepared by a simple sol–gel dip-coating methodology • Samples examined by SEM, μ-CT, and nitrogen sorption tests • Mechanical tests were carried out in the freeze-cast samples. • The presence of silica coatings on the alumina surface decreased the CO{sub 2} permeance.« less

Preparation and characterization of kefiran electrospun nanofibers.

PubMed

Esnaashari, Seyedeh Sara; Rezaei, Sasan; Mirzaei, Esmaeil; Afshari, Hamed; Rezayat, Seyed Mahdi; Faridi-Majidi, Reza

2014-09-01

In this study, we report the first successful production of kefiran nanofibers through electrospinning process using distilled water as solvent. For this purpose, kefiran was extracted from cultured kefir grains, and homogenous kefiran solutions with different concentrations were prepared and then electrospun to obtain uniform nanofibers. The effect of main process parameters, including applied voltage, tip-to-collector distance, and feeding rate, on diameter and morphology of produced nanofibers, was studied. Scanning electron microscopy (SEM) and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy were used to characterize electrospun mats. Rheological behavior of the kefiran solution was evaluated via a cone and plate rheometer too. The results exhibited that diameter of kefiran nanofibers increased with increasing polymer concentration, applied voltage, and polymer feeding rate, while tip-to-collector distance did not have significant effect on nanofiber diameter. ATR-FTIR spectra showed that kefiran has maintained its molecular structure during electrospinning process. Flow curves also demonstrated shear thinning behavior for kefiran solutions. Copyright © 2014 Elsevier B.V. All rights reserved.

Preparation of highly pure zeaxanthin particles from sea water-cultivated microalgae using supercritical anti-solvent recrystallization.

PubMed

Chen, Chao-Rui; Hong, Siang-En; Wang, Yuan-Chuen; Hsu, Shih-Lan; Hsiang, Daina; Chang, Chieh-Ming J

2012-01-01

Xanthophylls, including zeaxanthin, are considered dietary supplements with a potentially positive impact on age-related macular degeneration. Using pilot-scale column fractionation coupled with supercritical anti-solvent (SAS) recrystallization, highly pure zeaxanthin particulates were prepared from ultrasonic extracts of the microalgae, Nannochloropsis oculata, grown in sea water. Column partition chromatography increased the concentration of zeaxanthin from 36.2 mg/g of the ultrasonic extracts to 425.6 mg/g of the collected column fractions. A response surface methodology was systematically designed for the SAS process by changing feed concentration, CO(2) flow rate and anti-solvent pressure. Zeaxanthin-rich particles with a purity of 84.2% and a recovery of 85.3% were produced using supercritical anti-solvent recrystallization from the column eluate at a feed concentration of 1.5 mg/mL, CO(2) flow rate of 48.6 g/min and pressure of 135 bar. Copyright © 2011 Elsevier Ltd. All rights reserved.

The utilization of endopower β in commercial feed which contains palm kernel cake on performance of broiler chicken

NASA Astrophysics Data System (ADS)

Purba, S. S. A.; Tafsin, M.; Ginting, S. P.; Khairani, Y.

2018-02-01

Palm kernel cake is an agricultural waste that can be used as raw material in the preparation of poultry rations. The design used was Completely Randomized Design (CRD) with 5 treatments and 4 replications. Level endopower β used 0 % (R0), 0.02% (R1), 0.04% (R2) and 0.06% (R3). The results showed that R0a and R0b were significantly different from R3 in terms of diet consumption, body weight gain and the conversion ratio The utilization of endopower β in commercial diets containing palm kernel cake in broilers can increase body weight gain, feed consumption, improve feed use efficiency and even energy. It is concluded that utilization endpower β improve performances of broiler chicken fed by diet containing palm kernel cake.

Feeding behaviors during home-based treatment of moderate acute malnutrition using corn-soy blends or lipid-based nutrient supplements.

PubMed

Iuel-Brockdorf, Ann-Sophie; Ouedraogo, Albertine; Ritz, Christian; Draebel, Tania Aase; Ashorn, Per; Filteau, Suzanne; Michaelsen, Kim F

2017-10-01

Feeding behaviors have an important impact on children's nutritional status and are essential to consider when implementing nutrition programs. The objective of this study was to explore and compare feeding behaviors related to supplementary feeding with corn-soy blends (CSB) and lipid-based nutrient supplements (LNS) based on best practice feeding behaviors. The study was conducted as part of a randomized controlled trial assessing the effectiveness of new formulations of CSB and LNS and comprised 1,546 children from 6 to 23 months. The study included a mixed methods approach using questionnaires, focus group discussions and home visits and interviews with a subsample of 20 caretakers of trial participants. We found that LNS, compared to CSB, were more likely to be mixed into other foods (OR [95% CI] 1.7 [1.3-2.2], p = <.001), served with a meal (OR [95% CI] 1.6 [1.1-2.3], p = <.018)or between meals (OR [95% CI] 1.5 [1.1-1.9], p = <.005), and fed using an encouraging feeding style (mean difference in percentage points [95% CI] 23% [6%:40%], p = .01). CSB were more likely to be fed using a forced feeding style (mean difference in percentage points [95% CI] 18% [3%:33%], p = .02) and were often observed to be served unprepared. The main differences in feeding behaviors between the two diet groups were linked to how and when supplements were served. Educational instructions should therefore be adapted according to the supplement provided; when providing CSB, efforts should be made to promote an encouraging feeding style, and emphasis should be made to ensure preparations are made according to recommendations. © 2016 John Wiley & Sons Ltd.

Rapid and Specific Detection of Salmonella spp. in Animal Feed Samples by PCR after Culture Enrichment

PubMed Central

Löfström, Charlotta; Knutsson, Rickard; Axelsson, Charlotta Engdahl; Rådström, Peter

2004-01-01

A PCR procedure has been developed for routine analysis of viable Salmonella spp. in feed samples. The objective was to develop a simple PCR-compatible enrichment procedure to enable DNA amplification without any sample pretreatment such as DNA extraction or cell lysis. PCR inhibition by 14 different feed samples and natural background flora was circumvented by the use of the DNA polymerase Tth. This DNA polymerase was found to exhibit a high level of resistance to PCR inhibitors present in these feed samples compared to DyNAzyme II, FastStart Taq, Platinum Taq, Pwo, rTth, Taq, and Tfl. The specificity of the Tth assay was confirmed by testing 101 Salmonella and 43 non-Salmonella strains isolated from feed and food samples. A sample preparation method based on culture enrichment in buffered peptone water and DNA amplification with Tth DNA polymerase was developed. The probability of detecting small numbers of salmonellae in feed, in the presence of natural background flora, was accurately determined and found to follow a logistic regression model. From this model, the probability of detecting 1 CFU per 25 g of feed in artificially contaminated soy samples was calculated and found to be 0.81. The PCR protocol was evaluated on 155 naturally contaminated feed samples and compared to an established culture-based method, NMKL-71. Eight percent of the samples were positive by PCR, compared with 3% with the conventional method. The reasons for the differences in sensitivity are discussed. Use of this method in the routine analysis of animal feed samples would improve safety in the food chain. PMID:14711627

Vehicle fuel system

DOEpatents

Risse, John T.; Taggart, James C.

1976-01-01

A vehicle fuel system comprising a plurality of tanks, each tank having a feed and a return conduit extending into a lower portion thereof, the several feed conduits joined to form one supply conduit feeding fuel to a supply pump and using means, unused fuel being returned via a return conduit which branches off to the several return conduits.

Stockpiles and food availability in feeding facilities after the Great East Japan Earthquake.

PubMed

Nozue, Miho; Ishikawa-Takata, Kazuko; Sarukura, Nobuko; Sako, Kazuko; Tsuboyama-Kasaoka, Nobuyo

2014-01-01

Food stockpiles and methods of ensuring food availability after the Great East Japan Earthquake of March 11, 2011 have been studied. Questionnaires were sent to 1911 registered dietitians and general dietitians who were members of the Japan Dietetic Association in August 2012. Four hundred thirty-five dietitians (22.8%) completed the questionnaire about work involved in feeding facilities, types and administration of meals, and food stockpiles. Methods of ensuring food availability, preparation, and accommodating food for special dietary uses were recorded for the three-day period immediately following the earthquake, and the period from 4 days to one month after the earthquake. Three days after the earthquake, differences in administration of meals at feeding facilities providing three meals daily, food stockpiles, organization, contactable facilities, and how to contact them for food items were assessed. Sixty-nine percent of all feeding facilities in this study had stockpiles of food before the Great East Japan Earthquake. Administration of meals in feeding facilities and the possibility of contact with cooperative feeding facilities were found to correlate positively with ensuring the availability of food groups. Food scores were higher in facilities providing three meals daily by direct administration of meals and with accessible public administrators, cooperative facilities and suppliers, and facilities that were contactable by landline telephone, mobile phone, fax or email. The necessity for natural disaster-readiness through continuous stockpiling food at feeding facilities is confirmed. Each prospective feeding facility must be required to plan its stockpiles, their turnover and replaceability to maximise food security in the face of disaster.

Hydrogen separation process

DOEpatents

Mundschau, Michael [Longmont, CO; Xie, Xiaobing [Foster City, CA; Evenson, IV, Carl; Grimmer, Paul [Longmont, CO; Wright, Harold [Longmont, CO

2011-05-24

A method for separating a hydrogen-rich product stream from a feed stream comprising hydrogen and at least one carbon-containing gas, comprising feeding the feed stream, at an inlet pressure greater than atmospheric pressure and a temperature greater than 200.degree. C., to a hydrogen separation membrane system comprising a membrane that is selectively permeable to hydrogen, and producing a hydrogen-rich permeate product stream on the permeate side of the membrane and a carbon dioxide-rich product raffinate stream on the raffinate side of the membrane. A method for separating a hydrogen-rich product stream from a feed stream comprising hydrogen and at least one carbon-containing gas, comprising feeding the feed stream, at an inlet pressure greater than atmospheric pressure and a temperature greater than 200.degree. C., to an integrated water gas shift/hydrogen separation membrane system wherein the hydrogen separation membrane system comprises a membrane that is selectively permeable to hydrogen, and producing a hydrogen-rich permeate product stream on the permeate side of the membrane and a carbon dioxide-rich product raffinate stream on the raffinate side of the membrane. A method for pretreating a membrane, comprising: heating the membrane to a desired operating temperature and desired feed pressure in a flow of inert gas for a sufficient time to cause the membrane to mechanically deform; decreasing the feed pressure to approximately ambient pressure; and optionally, flowing an oxidizing agent across the membrane before, during, or after deformation of the membrane. A method of supporting a hydrogen separation membrane system comprising selecting a hydrogen separation membrane system comprising one or more catalyst outer layers deposited on a hydrogen transport membrane layer and sealing the hydrogen separation membrane system to a porous support.

Innovative look at dairy heifer rearing: Effect of prenatal and post-natal environment on later performance.

PubMed

Van Eetvelde, M; Opsomer, G

2017-08-01

As heifer rearing is a costly investment, dairy farmers have been stimulated to maximize early growth of their calves, mainly by enhanced liquid feeding. However, the long-term effects of this "accelerated growth" are largely unknown. Studies recently performed at Ghent University indicate that in dairy cattle, certain maternal factors (such as young age and high milk yield) and environmental factors (such as high ambient temperatures) create a suboptimal environment for the developing foetus, altering the phenotype of the newborn calf. According to the "thrifty phenotype hypothesis," these metabolic alterations prepare the newborn for similar ("matching") conditions after birth, enhancing its survival during periods of limited feeding. Yet, when an abundance of nutrients is available in post-natal life (e.g., during periods of enhanced feeding), the "mismatch" between pre- and post-natal environment results in an early catch-up growth, with potential negative consequences. The aim of the article was to discuss this mismatch between pre- and post-natal environment in dairy calves. Previous studies, especially in human medicine, have shown catch-up growth to be associated with obesity, fertility problems, metabolic diseases and a reduced lifespan. Hence, we hypothesize that, by applying programs of accelerated growth, our current management system accentuates the mismatch between the pre- and post-natal environment in dairy calves. We can conclude that, although more research is necessary, the current findings point towards a more individual approach when rearing dairy heifers. © 2017 Blackwell Verlag GmbH.

Treatment of petroleum refinery wastewater using a sequential anaerobic-aerobic moving-bed biofilm reactor system based on suspended ceramsite.

PubMed

Lu, Mang; Gu, Li-Peng; Xu, Wen-Hao

2013-01-01

In this study, a novel suspended ceramsite was prepared, which has high strength, optimum density (close to water), and high porosity. The ceramsite was used to feed a moving-bed biofilm reactor (MBBR) system with an anaerobic-aerobic (A/O) arrangement to treat petroleum refinery wastewater for simultaneous removal of chemical oxygen demand (COD) and ammonium. The hydraulic retention time (HRT) of the anaerobic-aerobic MBBR system was varied from 72 to 18 h. The anaerobic-aerobic system had a strong tolerance to shock loading. Compared with the professional emission standard of China, the effluent concentrations of COD and NH3-N in the system could satisfy grade I at HRTs of 72 and 36 h, and grade II at HRT of 18 h. The average sludge yield of the anaerobic reactor was estimated to be 0.0575 g suspended solid/g CODremoved. This work demonstrated that the anaerobic-aerobic MBBR system using the suspended ceramsite as bio-carrier could be applied to achieving high wastewater treatment efficiency.

Going With the Flow: An Aid in Detecting and Differentiating Bronchopulmonary Sequestrations and Hybrid Lesions.

PubMed

Oliver, Edward R; DeBari, Suzanne E; Giannone, Mariann M; Pogoriler, Jennifer E; Johnson, Ann M; Horii, Steven C; Gebb, Juliana S; Howell, Lori J; Adzick, N Scott; Coleman, Beverly G

2018-02-01

To assess the ability of prenatal ultrasound (US) in identifying systemic feeding arteries in bronchopulmonary sequestrations and hybrid lesions and report the ability of US in classifying bronchopulmonary sequestrations as intralobar or extralobar. Institutional Review Board-approved radiology and clinical database searches from 2008 to 2015 were performed for prenatal lung lesions with final diagnoses of bronchopulmonary sequestrations or hybrid lesions. All patients had detailed US examinations, and most patients had ultrafast magnetic resonance imaging (MRI). Lesion location, size, and identification of systemic feeding arteries and draining veins were assessed with US. The study consisted of 102 bronchopulmonary sequestrations and 86 hybrid lesions. The median maternal age was 30 years. The median gestational age was 22 weeks 5 days. Of bronchopulmonary sequestrations, 66 had surgical pathologic confirmation, and 100 had postnatal imaging. Bronchopulmonary sequestration locations were intrathoracic (n = 77), intra-abdominal (n = 19), and transdiaphragmatic (n = 6). Of hybrid lesions, 84 had surgical pathologic confirmation, and 83 had postnatal imaging. Hybrid lesion locations were intrathoracic (n = 84) and transdiaphragmatic (n = 2). Ultrasound correctly identified systemic feeding arteries in 86 of 102 bronchopulmonary sequestrations and 79 of 86 hybrid lesions. Of patients who underwent MRI, systemic feeding arteries were reported in 62 of 92 bronchopulmonary sequestrations and 56 of 81 hybrid lesions. Ultrasound identified more systemic feeding arteries than MRI in both bronchopulmonary sequestrations and hybrid lesions (P < .01). Magnetic resonance imaging identified systemic feeding arteries that US did not in only 2 cases. In cases in which both systemic feeding arteries and draining veins were identified, US could correctly predict intrathoracic lesions as intralobar or extralobar in 44 of 49 bronchopulmonary sequestrations and 68 of 73 hybrid lesions. Ultrasound is most accurate for systemic feeding artery detection in bronchopulmonary sequestrations and hybrid lesions and can also type the lesions as intralobar or extralobar when draining veins are evaluated. © 2017 by the American Institute of Ultrasound in Medicine.

Growth and Nutrient Utilization in Kids Fed Expander-extruded Complete Feed Pellets Containing Red Gram (Cajanus cajan) Straw

PubMed Central

Reddy, P. B.; Reddy, T. J.; Reddy, Y. R.

2012-01-01

A growth and digestibility study was conducted using Osmanabadi goat male kids by feeding complete diets in the form of mash or expander extruded pellets containing different levels of red gram (Cajanus cajan) straw (RGS). Two iso-nitrogenous complete diets were prepared by incorporating RGS at 35% and 50% levels. Half the quantity of each complete mash feed was then converted into pellets through expander extruder processing. Thirty two kids of 4 to 5 months age were divided into four groups of eight each and were fed for 150 d with four experimental diets (T1: mash with 35% RGS, T2: mash with 50% RGS, T3: pellets with 35% RGS and T4: pellets with 50% RGS). Pelleting of complete diets significantly (p<0.001) increased the voluntary feed intake (671.45 vs 426.28 g/d) at both levels of RGS in the feeds. Average daily gain (ADG, g/d) also increased significantly (p<0.001) from 48.79 in kids fed mash diet to 71.29 in those fed with pelleted diets. Feed conversion efficiency (dry matter (DM) intake: weight gain) was comparable among all the treatment groups. Digestibility of nutrients was not affected by pelleting of the feeds whereas, increasing the level of inclusion of RGS in feeds from 35% to 50% decreased (p<0.05) the digestibility of DM and crude protein (CP) resulting in lower (p<0.001) metabolizable energy (ME) content (MJ/kg DM) in feeds with 50% RGS (7.93 vs 8.75). Daily intake (MJ/kg BW−0.75) of ME decreased (p<0.05) in feeds containing 50% RGS while pelleting of feeds increased (p<0.05) the intake of DM, CP, digestible crude protein (DCP) and ME. It is inferred that expander extruder pelleting can efficiently utilize RGS up to 50% level in complete diets for growing goat kids. PMID:25049537

Growth and Nutrient Utilization in Kids Fed Expander-extruded Complete Feed Pellets Containing Red Gram (Cajanus cajan) Straw.

PubMed

Reddy, P B; Reddy, T J; Reddy, Y R

2012-12-01

A growth and digestibility study was conducted using Osmanabadi goat male kids by feeding complete diets in the form of mash or expander extruded pellets containing different levels of red gram (Cajanus cajan) straw (RGS). Two iso-nitrogenous complete diets were prepared by incorporating RGS at 35% and 50% levels. Half the quantity of each complete mash feed was then converted into pellets through expander extruder processing. Thirty two kids of 4 to 5 months age were divided into four groups of eight each and were fed for 150 d with four experimental diets (T1: mash with 35% RGS, T2: mash with 50% RGS, T3: pellets with 35% RGS and T4: pellets with 50% RGS). Pelleting of complete diets significantly (p<0.001) increased the voluntary feed intake (671.45 vs 426.28 g/d) at both levels of RGS in the feeds. Average daily gain (ADG, g/d) also increased significantly (p<0.001) from 48.79 in kids fed mash diet to 71.29 in those fed with pelleted diets. Feed conversion efficiency (dry matter (DM) intake: weight gain) was comparable among all the treatment groups. Digestibility of nutrients was not affected by pelleting of the feeds whereas, increasing the level of inclusion of RGS in feeds from 35% to 50% decreased (p<0.05) the digestibility of DM and crude protein (CP) resulting in lower (p<0.001) metabolizable energy (ME) content (MJ/kg DM) in feeds with 50% RGS (7.93 vs 8.75). Daily intake (MJ/kg BW(-0.75)) of ME decreased (p<0.05) in feeds containing 50% RGS while pelleting of feeds increased (p<0.05) the intake of DM, CP, digestible crude protein (DCP) and ME. It is inferred that expander extruder pelleting can efficiently utilize RGS up to 50% level in complete diets for growing goat kids.

Fodder Resource Uses and Assessment of Nitrogen Flows on Livestock Farming with Crop Production

NASA Astrophysics Data System (ADS)

Shirahase, Kyoko; Kobayashi, Hisashi

With understanding the livestock farming on cattle breeding practiced increasing of self-production of fodders by the farmland's operation as “Livestock Farming with crop production”, we investigated the utilizations of actual fodder resources and farmland for two selected different types of livestock farming systems: “Multiple Type” which practices cattle raising with fodder cultivation, and “Grazing Type” which practices grazing and fodder cultivation with similar feed self-sufficiency rates. We also prepared and compared material and nitrogen flow of both livestock farming systems. The amount of nitrogen flow is clearly different between the two types though feed self-sufficiency rates are at similar level. Moreover, we defined “Internal Nitrogen Rate (INR)” which indicates the rate of internal nitrogen use to total nitrogen use in cattle raising, “Internal Nitrogen Circulation Rate (NCR)” which indicates the ratio of nitrogen amount in internal circulation to the nitrogen amount introduced from outside, and Nitrogen Outflow Potential (Op), which is the balance of nitrogen amount between input to farmlands and uptake by plants, and analyzed the balance of the amounts of nitrogen flows in both livestock farming type. It is suggested that “Grazing type”, which had the values of relatively high NCR and absolutely low Op, was the livestock farming type with high rates of nitrogen procurement from the interregional farming and low risk of nitrogen outflow.

Implementation of an electromagnetic imaging system to facilitate nasogastric and post-pyloric feeding tube placement in patients with and without critical illness.

PubMed

Windle, E M; Beddow, D; Hall, E; Wright, J; Sundar, N

2010-02-01

Artificial nutrition support is required to optimise nutritional status in many patients. Traditional methods of placing feeding tubes may incur clinical risk and financial costs. A technique facilitating placement of nasogastric and post-pyloric tubes via electromagnetic visual guidance may reduce the need for X-ray exposure, endoscopy time and the use of parenteral nutrition. The present study aimed to audit use of such a system at initial implementation in patients within an acute NHS Trust. A retrospective review was undertaken of dietetic and medical records for the first 14 months of using the Cortrak system. Data were collected on referral origin, preparation of the patient prior to insertion, placement success rates and need for X-ray. Cost analysis was also performed. Referrals were received from primary consultants or consultant intensivists, often on the advice of the dietitian. Fifty-nine percent of patients received prokinetic therapy at the time of placement. Thirty-nine tube placements were attempted. Sixty-nine percent of referrals for post-pyloric tube placement resulted in successful placement. X-ray films were requested for 22% of all attempted post-pyloric placements. Less than half of nasogastric tubes were successfully passed, although none of these required X-ray confirmation. The mean cost per tube insertion attempt was 111 pounds. This system confers advantages, particularly in terms of post-pyloric tube placement, even at this early stage of implementation. A reduction in clinical risk and cost avoidance related to X-ray exposure, the need for endoscopic tube placement and parenteral nutrition have been achieved. The implementation of this system should be considered in other centres.

Dietary Patterns during Complementary Feeding and Later Outcomes.

PubMed

Emmett, Pauline M

2016-01-01

Guidelines for healthy infant feeding provide advice on breastfeeding and complementary feeding. The Avon Longitudinal Study of Parents and Children (ALSPAC) derived dietary patterns in comparison to infant feeding guidelines and by using principal components analysis (PCA). The ALSPAC cohort was recruited during pregnancy. Parent-completed questionnaires assessed diet at age 6 and 15 months. Children were weighed and measured at 7 years of age and IQ was assessed at 8 years. A complementary feeding utility index was calculated in relation to 14 feeding recommendations. High scores on the index were due to longer breastfeeding, and feeding more fruit and vegetables and less ready-prepared baby foods. The index scores were positively related to IQ and 'healthy' dietary patterns in childhood. In infancy four dietary patterns were derived from PCA at each age. Three occurred at both ages: 'HM traditional' (home-made meat, vegetables and desserts), 'discretionary' (processed adult foods) and 'RM baby foods' (commercial ready-made baby foods). A 'breastfeeding' pattern was derived at 6 months, with fruit and vegetables included. At 15 months, a 'HM contemporary' pattern included cheese, fish, nuts, legumes, fruit and vegetables. The 'discretionary' and 'RM baby foods' patterns at both ages were negatively associated, while the 'breastfeeding' and 'HM contemporary' patterns were positively associated with IQ. These results suggest that infant diet influences cognitive development in children and may set a trend for later eating patterns. © 2016 Nestec Ltd., Vevey/S. Karger AG, Basel.

Endogenous opioids and feeding behavior: a 30-year historical perspective.

PubMed

Bodnar, Richard J

2004-04-01

This invited review, based on the receipt of the Third Gayle A. Olson and Richard D. Olson Prize for the publication of the outstanding behavioral article published in the journal Peptides in 2002, examines the 30-year historical perspective of the role of the endogenous opioid system in feeding behavior. The review focuses on the advances that this field has made over the past 30 years as a result of the timely discoveries that were made concerning this important neuropeptide system, and how these discoveries were quickly applied to the analysis of feeding behavior and attendant homeostatic processes. The discoveries of the opioid receptors and opioid peptides, and the establishment of their relevance to feeding behavior were pivotal in studies performed in the 1970s. The 1980s were characterized by the establishment of opioid receptor subtype agonists and antagonists and their relevance to the modulation of feeding behavior as well as by the use of general opioid antagonists in demonstrating the wide array of ingestive situations and paradigms involving the endogenous opioid system. The more recent work from the 1990s to the present, utilizes the advantages created by the cloning of the opioid receptor genes, the development of knockout and knockdown techniques, the systematic utilization of a systems neuroscience approach, and establishment of the reciprocity of how manipulations of opioid peptides and receptors affect feeding behavior with how feeding states affect levels of opioid peptides and receptors. The role of G-protein effector systems in opioid-mediated feeding responses, which was the subject of the prize-winning article, is then reviewed. Copyright 2004 Elsevier Inc.

Microwave time delays for the dual L-C-band feed system

NASA Technical Reports Server (NTRS)

Chen, J.

1989-01-01

A new dual-frequency feed system at Goldstone is designed to receive the Phobos spacecraft signal at L-band (1668 + or - 40 MHz) and transmit to the spacecraft at C-band (5008.75 + or - 5.00 MHz) simultaneously. Hence, calculations of the time delay from the C-band range calibration coupler to the phase center of the L-C dual feed and back to the L-band range calibration coupler are required to correct the range measurements. Time delays of the elements in the dual-frequency feed system are obtained mostly from computer calculations and partly from experimental measurements. The method used and results obtained are described.

Energy-beam-driven rapid fabrication system

DOEpatents

Keicher, David M.; Atwood, Clinton L.; Greene, Donald L.; Griffith, Michelle L.; Harwell, Lane D.; Jeantette, Francisco P.; Romero, Joseph A.; Schanwald, Lee P.; Schmale, David T.

2002-01-01

An energy beam driven rapid fabrication system, in which an energy beam strikes a growth surface to form a molten puddle thereon. Feed powder is then injected into the molten puddle from a converging flow of feed powder. A portion of the feed powder becomes incorporated into the molten puddle, forcing some of the puddle contents to freeze on the growth surface, thereby adding an additional layer of material. By scanning the energy beam and the converging flow of feed powder across the growth surface, complex three-dimensional shapes can be formed, ready or nearly ready for use. Nearly any class of material can be fabricated using this system.

Characterization of tapered slot antenna feeds and feed arrays

NASA Technical Reports Server (NTRS)

Kim, Young-Sik; Yngvesson, K. Sigfrid

1990-01-01

A class of feed antennas and feed antenna arrays used in the focal plane of paraboloid reflectors and exhibiting higher than normal levels of cross-polarized radiation in the diagonal planes is addressed. A model which allows prediction of element gain and aperture efficiency of the feed/reflector system is presented. The predictions are in good agreement with experimental results. Tapered slot antenna (TSA) elements are used an example of an element of this type. It is shown that TSA arrays used in multibeam systems with small beam spacings are competitive in terms of aperture efficiency with other, more standard types of arrays incorporating waveguide type elements.

Effect of Dietary Supplementation of Red Ginseng By-product on Laying Performance, Blood Biochemistry, Serum Immunoglobulin and Microbial Population in Laying Hens.

PubMed

Kang, H K; Park, S-B; Kim, C H

2016-10-01

This study was carried out to investigate the effect of dietary supplementation of red ginseng by-product (RGB) on the laying performance, blood biochemistry, and microbial population in laying hens. A total of 120 Hy-Line Brown laying hens (75 weeks old) were randomly allotted to 1 of 3 dietary treatments with 4 replicates per treatment. A commercial-type basal diet was prepared, and 2 additional diets were prepared by supplementing 5.0 or 10.0 g/kg of RGB to the basal diet at the expense of corn. The diets were fed to hens on an ad libitum basis for 4 weeks. There were no differences in feed intake, egg weight, and feed conversion ratio during 4 weeks of the feeding trial. However, hen-day egg production was significantly greater (p<0.05) for the RGB treatment groups than that for the basal treatment group. There were no differences in triglyceride, aspartate aminotransferase, and alanine aminotransferase during the 4-week feeding trial. However, RGB supplementation increased (p<0.05) the serum immunoglobulin G (IgG) and IgM content compared with basal treatment group. The total cholesterol was lower (p<0.05) in the RGB treatments groups than that in the basal treatment group. The intestinal Lactobacillus population was greater (p<0.05) for the RGB treatments groups than that for the basal treatment group. However, the numbers of Salmonella and Escherichia coli were not different among dietary treatments. During the entire experiment, there was no significant difference in egg quality among all the treatments. In conclusion, in addition to improving hen-day production, there were positive effects of dietary RGB supplementation on serum immunoglobulin and cholesterol levels in laying hens.

Effect of Dietary Supplementation of Red Ginseng By-product on Laying Performance, Blood Biochemistry, Serum Immunoglobulin and Microbial Population in Laying Hens

PubMed Central

Kang, H. K.; Park, S.-B.; Kim, C. H.

2016-01-01

This study was carried out to investigate the effect of dietary supplementation of red ginseng by-product (RGB) on the laying performance, blood biochemistry, and microbial population in laying hens. A total of 120 Hy-Line Brown laying hens (75 weeks old) were randomly allotted to 1 of 3 dietary treatments with 4 replicates per treatment. A commercial-type basal diet was prepared, and 2 additional diets were prepared by supplementing 5.0 or 10.0 g/kg of RGB to the basal diet at the expense of corn. The diets were fed to hens on an ad libitum basis for 4 weeks. There were no differences in feed intake, egg weight, and feed conversion ratio during 4 weeks of the feeding trial. However, hen-day egg production was significantly greater (p<0.05) for the RGB treatment groups than that for the basal treatment group. There were no differences in triglyceride, aspartate aminotransferase, and alanine aminotransferase during the 4-week feeding trial. However, RGB supplementation increased (p<0.05) the serum immunoglobulin G (IgG) and IgM content compared with basal treatment group. The total cholesterol was lower (p<0.05) in the RGB treatments groups than that in the basal treatment group. The intestinal Lactobacillus population was greater (p<0.05) for the RGB treatments groups than that for the basal treatment group. However, the numbers of Salmonella and Escherichia coli were not different among dietary treatments. During the entire experiment, there was no significant difference in egg quality among all the treatments. In conclusion, in addition to improving hen-day production, there were positive effects of dietary RGB supplementation on serum immunoglobulin and cholesterol levels in laying hens. PMID:26954140

Fuel sensor-less control of a liquid feed fuel cell system under steady load for portable applications

NASA Astrophysics Data System (ADS)

Chang, C. L.; Chen, C. Y.; Sung, C. C.; Liou, D. H.

This study presents a novel fuel sensor-less control scheme for a liquid feed fuel cell system that does not rely on a fuel concentration sensor. The proposed approach simplifies the design and reduces the cost and complexity of a liquid feed fuel cell system, and is especially suited to portable power sources, of which the volume and weight are important. During the reaction of a fuel cell, the cell's operating characteristics, such as potential, current and power are measured to control the supply of fuel and regulate its concentration to optimize performance. Experiments were conducted to verify that the fuel sensor-less control algorithm is effective in the liquid feed fuel cell system.

Infant Care.

ERIC Educational Resources Information Center

North, A. Frederick

This new addition of a government pamphlet is a guide offering advice and information to new parents. Sections include: You and Your New Baby (handling the baby, care of the mother, feeding, etc.); First Weeks at Home (equipment, formula preparation, bathing, sleeping, crying, colic, etc.); After the First Weeks (temperament, "difficult" babies,…

Suitability of feeding and chewing time for estimation of feed intake in dairy cows.

PubMed

Pahl, C; Hartung, E; Grothmann, A; Mahlkow-Nerge, K; Haeussermann, A

2016-09-01

Monitoring of feeding and rumination behaviour can provide useful information for dairy herd management. The feeding behaviour of dairy cows can be recorded by different techniques, such as video cameras, weighing troughs or chewing sensors. Among feeding characteristics, individual feed intake of cows is of utmost interest, but as weighing troughs have high space and cost requirements they are used primarily in research studies. The objective of the present study was to evaluate whether records on feeding time or chewing activity or a combination of both contain enough information to estimate feed intake with sufficient accuracy. Feed intake and feeding time per cow were recorded by means of weighing troughs. Concurrently, chewing activity of seven cows was recorded by MSR-ART pressure sensors during five to eight measuring days per cow. Feeding and chewing behaviour were evaluated in time slots (1 min) and additionally assigned to feeding bouts for further analysis. The 1 min time slots were classified into feeding/no feeding or chewing/no chewing by the two systems, and agreement was found in 92.2% of the records. On average, cows spent 270±39 min/day at the feeding troughs and chewed 262±48 min/day. The average fresh matter intake (FMI) was 49.6±5.1 kg/day. Feed intake was divided into 9.7 bouts/day during which cows fed in average 27.8±21.7 min/bout and chewed 27.0±23.1 min/bout. The correlation between FMI and feeding time was r=0.891 and between FMI and chewing time r=0.780 overall cows. Hence, both systems delivered suitable information for estimating feed intake.

Effect of Liquid Feed-Stock Composition on the Morphology of Titanium Dioxide Films Deposited by Thermal Plasma Spray.

PubMed

Adán, C; Marugán, J; van Grieken, R; Chien, K; Pershin, L; Coyle, T; Mostaghimi, J

2015-09-01

Titanium dioxide coatings were deposited on the surface of titanium foils by Thermal Plasma Spray (TPS) process. Three different TiO2 coatings were prepared using the commercial TiO2-P25 nanopowder and titanium isopropoxide precursor solution as feed-stocks. Structure and morphology of the TiO2-P25 powder and the plasma sprayed coatings were analyzed by X-ray diffraction (XRD), Raman spectroscopy, N2 adsorption-desorption isotherms, UV-visible spectroscopy and Scanning Electron Microscopy (SEM). XRD and Raman results indicate that the TiO2 coatings were composed of an anatase/rutile mixture that is conditioned by the suspension composition used to be sprayed. Coatings prepared from TiO2-P25 nanoparticles in water suspension (NW-P25) and titanium isopropoxide solution suspension (NSP-P25) are incorporated into the coatings without phase transformation and their anatase/rutile ratio percentage remains very similar to the starting TiO2-P25 powder. On the contrary, when titanium isopropoxide solution is used for spraying (SP), the amount of rutile increases in the final TiO2 coating. SEM analysis also reveals different microstructure morphology, coating thickness, density and porosity of the three TiO2 films that depend significantly on the type of feed-stock employed. Interestingly, we have observed the role of titanium isopropoxide in the formation of more porous and cohesive layers of TiO2. The NSP-P25 coating, prepared with a mix of titanium isopropoxide solution based on TiO2 nanoparticles, presents higher deposition efficiencies and higher coating thickness than the film prepared with nanoparticles suspended in water (NW-P25) or with titanium isopropoxide solutions (SP). This is due to the precursor solution is acting as the cement between TiO2 nanoparticles, improving the cohesive strength of the coating. In sum, NSP-P25 and NW-P25 coatings display a good photocatalytic potential, based on their light absorption properties and mechanical stability. Band gap of the nanoparticulated coatings displays a light absorption at wavelengths below 379 and 399 nm for NW-P25 and NSP-P25 respectively. On the contrary, the SP coating, despite to present lower band-gap value, has bad cohesive properties with surface crackings that makes it mechanically unstable. Therefore, mixtures of P25 nanoparticles with titanium isopropoxide as feed-stock materials can produce promising photocatalytic coatings.

Development of functional extruded snacks by utilizing paste shrimp (Acetes spp.): process optimization and quality evaluation.

PubMed

Kumar, Raushan; Xavier, Ka Martin; Lekshmi, Manjusha; Dhanabalan, Vignaesh; Thachil, Madonna T; Balange, Amjad K; Gudipati, Venkateshwarlu

2018-04-01

Functional extruded snacks were prepared using paste shrimp powder (Acetes spp.), which is rich in protein. The process variables required for the preparation of extruded snacks was optimized using response surface methodology. Extrusion temperature (130-144 °C), level of Acetes powder (100-200 g kg -1 ) and feed moisture (140-200 g kg -1 ) were selected as design variables, and expansion ratio, porosity, hardness, crispness and thiobarbituric acid reactive substance value were taken as the response variables. Extrusion temperature significantly influenced all the response variables, while Acetes inclusion influenced all variables except porosity. Feed moisture content showed a significant quadratic effect on all responses and an interactive effect on expansion ratio and hardness. Shrimp powder incorporation increased the protein and mineral content of the final product. The extruded snack made with the combination of extrusion temperature 144.59 °C, feed moisture 178.5 g kg -1 and Acetes inclusion level 146.7 g kg -1 was found to be the best one based on sensory evaluation. The study suggests that use of Acetes species for the development of extruded snacks will serve as a means of utilization of Acetes as well as being a rich source of proteins for human consumption, which would otherwise remain unexploited as a by-catch. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

77 FR 75635 - Agency Information Collection Activities; Proposed Collection; Comment Request; Medicated Feed...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-21

...] Agency Information Collection Activities; Proposed Collection; Comment Request; Medicated Feed Mill... notice. This notice solicits comments on the medicated feed mill licensing system. DATES: Submit written... techniques, when appropriate, and other forms of information technology. Medicated Feed Mill Licensing...

Development of a Compact Eleven Feed Cryostat for the Patriot 12-m Antenna System

NASA Technical Reports Server (NTRS)

Beaudoin, Christopher; Kildal, Per-Simon; Yang, Jian; Pantaleev, Miroslav

2010-01-01

The Eleven antenna has constant beam width, constant phase center location, and low spillover over a decade bandwidth. Therefore, it can feed a reflector for high aperture efficiency (also called feed efficiency). It is equally important that the feed efficiency and its subefficiencies not be degraded significantly by installing the feed in a cryostat. The MIT Haystack Observatory, with guidance from Onsala Space Observatory and Chalmers University, has been working to integrate the Eleven antenna into a compact cryostat suitable for the Patriot 12-m antenna. Since the analysis of the feed efficiencies in this presentation is purely computational, we first demonstrate the validity of the computed results by comparing them to measurements. Subsequently, we analyze the dependence of the cryostat size on the feed efficiencies, and, lastly, the Patriot 12-m subreflector is incorporated into the computational model to assess the overall broadband efficiency of the antenna system.

FLIC: High-Throughput, Continuous Analysis of Feeding Behaviors in Drosophila

PubMed Central

Pletcher, Scott D.

2014-01-01

We present a complete hardware and software system for collecting and quantifying continuous measures of feeding behaviors in the fruit fly, Drosophila melanogaster. The FLIC (Fly Liquid-Food Interaction Counter) detects analog electronic signals as brief as 50 µs that occur when a fly makes physical contact with liquid food. Signal characteristics effectively distinguish between different types of behaviors, such as feeding and tasting events. The FLIC system performs as well or better than popular methods for simple assays, and it provides an unprecedented opportunity to study novel components of feeding behavior, such as time-dependent changes in food preference and individual levels of motivation and hunger. Furthermore, FLIC experiments can persist indefinitely without disturbance, and we highlight this ability by establishing a detailed picture of circadian feeding behaviors in the fly. We believe that the FLIC system will work hand-in-hand with modern molecular techniques to facilitate mechanistic studies of feeding behaviors in Drosophila using modern, high-throughput technologies. PMID:24978054

Evolution of the Maillard Reaction in Glutamine or Arginine-Dextrinomaltose Model Systems.

PubMed

Pastoriza, Silvia; Rufián-Henares, José Ángel; García-Villanova, Belén; Guerra-Hernández, Eduardo

2016-12-07

Enteral formulas are foods designed for medical uses to feed patients who are unable to eat normally. They are prepared by mixing proteins, amino acids, carbohydrates and fats and submitted to sterilization. During thermal treatment, the Maillard reaction takes place through the reaction of animo acids with reducing sugars. Thus, although glutamine and arginine are usually added to improve the nutritional value of enteral formulas, their final concentration may vary. Thus, in the present paper the early, intermediate, and advanced states of the Maillard reaction were studied in model systems by measuring loss of free amino acids through the decrease of fluorescence intensity with o -phtaldialdehyde (OPA), 5-Hydroximethylfurfural (HMF), furfural, glucosylisomaltol, fluorescence, and absorbance at 420 nm. The systems were prepared by mixing glutamine or arginine with dextrinomaltose (similar ingredients to those used in special enteral formula), and heated at 100 °C, 120 °C and 140 °C for 0 to 30 min. The recorded changes in the concentration of furanic compounds was only useful for longer heating times of high temperatures, while absorbance and fluorescence measurements were useful in all the assayed conditions. In addition, easiness and sensitivity of absorbance and fluorescence make them useful techniques that could be implemented as indicators for monitoring the manufacture of special enteral formulas. Glucosylisomaltol is a useful indicator to monitor the manufacture of glutamine-enriched enteral formulas.

Antimicrobial Polymers Prepared by ROMP with Unprecedented Selectivity: A Molecular Construction Kit Approach

PubMed Central

Lienkamp, Karen; Madkour, Ahmad E.; Musante, Ashlan; Nelson, Christopher F.; Nüsslein, Klaus

2014-01-01

Synthetic Mimics of Antimicrobial Peptides (SMAMPs) imitate natural host-defense peptides, a vital component of the body’s immune system. This work presents a molecular construction kit that allows the easy and versatile synthesis of a broad variety of facially amphiphilic oxanorbornene-derived monomers. Their ring-opening metathesis polymerization (ROMP) and deprotection provide several series of SMAMPs. Using amphiphilicity, monomer feed ratio, and molecular weight as parameters, polymers with 533 times higher selectivitiy (selecitviy = hemolytic concentration/minimum inhibitory concentration) for bacteria over mammalian cells were discovered. Some of these polymers were 50 times more selective for Gram-positive over Gram-negative bacteria while other polymers surprisingly showed the opposite preference. This kind of “double selectivity” (bacteria over mammalian and one bacterial type over another) is unprecedented in other polymer systems and is attributed to the monomer’s facial amphiphilicity. PMID:18593128

[Supervision of foods containing components of genetically modified organisms and the problems of labeling this type of products].

PubMed

Onishchenko, G G

2010-01-01

Commercial production of genetically modified (GM) crops as food or feed is regarded as a promising social area in the development of modern biotechnology. The Russian Federation has set up a governmental system to regulate the use of biotechnology products, which is based on Russian and foreign experience and the most up-to-date scientific approaches. The system for evaluating the quality and safety of GM foodstuffs envisages the postregistration monitoring of their circulation as an obligatory stage. For these purposes, the world community applies two methods: enzyme immunoassay and polymerase chain reaction. It should be noted that there are various approaches to GM food labeling in the world; this raises the question of whether the labeling of foods that are prepared from genetically modified organisms, but contain no protein or DNA is to be introduced in Russia, as in the European Union.

Genetically modified plants for non-food or non-feed purposes: straightforward screening for their appearance in food and feed.

PubMed

Alderborn, A; Sundström, J; Soeria-Atmadja, D; Sandberg, M; Andersson, H C; Hammerling, U

2010-02-01

Genetically modified (GM) plants aimed at producing food/feed are part of regular agriculture in many areas of the World. Commodity plants have also found application as bioreactors, designated non-food/non-feed GM (NFGM) plants, thereby making raw material for further refinement to industrial, diagnostic or pharmaceutical preparations. Many among them may pose health challenge to consumers or livestock animals, if occurring in food/feed. NFGM plants are typically released into the environment, but are grown under special oversight and any among several containment practices, none of which provide full protection against accidental dispersal. Adventitious admixture with food or feed can occur either through distributional mismanagement or as a consequence of gene flow to plant relatives. To facilitate NFGM surveillance we propose a new mandatory tagging of essentially all such plants, prior to cultivation or marketing in the European Union. The suggested tag--Plant-Made Industrial or Pharmaceutical Products Tag (PMIP-T)--is envisaged to occur as a transgenic silent DNA identifier in host plants and designed to enable technically simple identification and characterisation of any NFGM. Implementation of PMIP-T would permit inexpensive, reliable and high-throughput screening for NFGM specifically. The paper outlines key NFGM prospects and challenges as well as the PMIP-T concept. Copyright 2009 Elsevier Ltd. All rights reserved.

Evaluation of feed and feeding regime on growth performance, flesh quality and fecal viscosity of Atlantic salmon ( Salmo salar L.) in recirculating aquaculture systems

NASA Astrophysics Data System (ADS)

Sun, Guoxiang; Liu, Ying; Li, Yong; Li, Xian; Wang, Shunkui

2015-10-01

The effects of different feeds and feeding regimes on growth performance, flesh quality and fecal viscosity of Atlantic salmon ( Salmo salar L.) in recirculating aquaculture systems (RAS) were investigated. Fish (initial body weight of 1677 g ± 157 g) were fed with four commercial feeds (Nosan salmon-NS, Aller gold-AG, Skretting salmon-SS and Han ye-HY) in two feeding regimes (80% and 100% satiation) for 78 d. The results showed that salmon specific growth ratio (SGR) and weight gain ratio (WGR) were significantly affected by feed type and feeding regime ( P < 0.05). Feed conversion ratio (FCR) varied between 0.93 and 3.40, which was significantly affected by feed type ( P < 0.05), and slightly improved with increased satiation degree. The activities of digestive enzymes including protease, lipase and amylase were also significantly affected by feed type and feeding regime ( P < 0.05), increasing with satiation degree. Flesh qualities for vitamin E, hydroxyproline (HYP), liquid loss and muscle pH among all groups showed significant differences ( P < 0.05), ranging from 26.67 to 29.67, while no obvious difference was found in flesh color. Fecal viscosity for different treatments showed no significant difference, though improvement was found in 100% satiation group. From present experiment, it was concluded that both feed type and feeding regime can affect the important quality attributes of Atlantic salmon.

Orbital Maneuvering Engine Feed System Coupled Stability Investigation, Computer User's Manual

NASA Technical Reports Server (NTRS)

Schuman, M. D.; Fertig, K. W.; Hunting, J. K.; Kahn, D. R.

1975-01-01

An operating manual for the feed system coupled stability model was given, in partial fulfillment of a program designed to develop, verify, and document a digital computer model that can be used to analyze and predict engine/feed system coupled instabilities in pressure-fed storable propellant propulsion systems over a frequency range of 10 to 1,000 Hz. The first section describes the analytical approach to modelling the feed system hydrodynamics, combustion dynamics, chamber dynamics, and overall engineering model structure, and presents the governing equations in each of the technical areas. This is followed by the program user's guide, which is a complete description of the structure and operation of the computerized model. Last, appendices provide an alphabetized FORTRAN symbol table, detailed program logic diagrams, computer code listings, and sample case input and output data listings.

Studies on the preparation and plasma spherodization of yttrium aluminosilicate glass microspheres for their potential application in liver brachytherapy

NASA Astrophysics Data System (ADS)

Sreekumar, K. P.; Saxena, S. K.; Kumar, Yogendra; Thiyagarajan, T. K.; Dash, Ashutosh; Ananthapadmanabhan, P. V.; Venkatesh, Meera

2010-02-01

Plasma spheroidization exploits the high temperature and high enthalpy available in the thermal plasma jet to melt irregularly shaped powder particles and quench them to get dense spherical particles. Plasma spheroidization is a versatile process and can be applied to metals, ceramics, alloys and composites to obtain fine spherical powders. Radioactive microspheres incorporated with high energetic beta emitting radioisotopes have been reported to be useful in the palliative treatment of liver cancer. These powders are to be prepared in closer range of near spherical morphology in the size range 20-35 microns. Inactive glass samples were prepared by heating the pre-calculated amount of glass forming ingredients in a recrystallized alumina crucible. The glass was formed by keeping the glass forming ingredients at 1700°C for a period of three hours to form a homogeneous melt. After cooling, the glass was recovered from the crucible by crushing and was subsequently powdered mechanically with the help of mortar and pestle. This powder was used as the feed stock for plasma spheroidization using an indigenously developed 40 kW plasma spray system. Experiments were carried out at various operating parameters. The operating parameters were optimised to get spheroidised particles. The powder was sieved to get the required size range before irradiation.

Breastfeeding in emergencies.

PubMed

Kelly, M

1995-02-01

In emergency situations created by wars, natural disasters, and famines, people are forced to live in crowded, unsanitary conditions where access to food and health care is limited and the danger of infection, particularly with diarrheal diseases, is great. The situation is compounded when anxieties exist concerning breast feeding; this usually occurs in industrialized countries where artificial feeding was widespread prior to the crisis, breast feeding skills were lost, and inaccurate information replaced traditional knowledge. It is believed that psychological stress and poor diet cause breast milk to dry up. Although diet is important, undernourished women are capable of producing enough milk to feed their babies. Psychological stress can temporarily prevent the release of milk from the breast, but it does not affect milk production. Large supplies of infant formula are not needed, and unrestricted distribution of breast milk substitutes can undermine breast feeding and increase the risk of disease and death. Almost all mothers are physically capable of breast feeding. Those who provide health care and relief assistance during emergencies should undertake the following measures to support breast feeding and to protect the health of mothers: 1) work for agreement between outside agencies and local health workers on breast feeding policy and practice, share up-to-date information, and establish mechanisms to ensure actions are implemented in a coordinated manner; 2) ensure that maternity care practices follow WHO/UNICEF guidelines; 3) encourage women who are not breast feeding to do so, rather than criticizing them; 4) educate the whole community about the benefits of breast feeding and highlight the importance of family and social support; 5) offer one-to-one assistance to mothers who are experiencing difficulty breast feeding through use of a network of experienced mothers, or by training breast feeding counselors (women), who are sensitive to the culture, health beliefs, and circumstances of the mothers they assist; 6) provide assistance with relactation to mothers with infants who have stopped breast feeding early; 7) supply adequate basic food rations to every family, targeting supplementary food for pregnant and breast feeding women, and children of weaning age, not young infants; and 8) only provide infant formula to infants who do not have access to breast milk, and make sure their caregivers have the knowledge, skills, and resources to prepare and give feeds hygienically by cup rather than bottle.

Lab-on-chip systems for integrated bioanalyses

PubMed Central

Madaboosi, Narayanan; Soares, Ruben R.G.; Fernandes, João Tiago S.; Novo, Pedro; Moulas, Geraud; Chu, Virginia

2016-01-01

Biomolecular detection systems based on microfluidics are often called lab-on-chip systems. To fully benefit from the miniaturization resulting from microfluidics, one aims to develop ‘from sample-to-answer’ analytical systems, in which the input is a raw or minimally processed biological, food/feed or environmental sample and the output is a quantitative or qualitative assessment of one or more analytes of interest. In general, such systems will require the integration of several steps or operations to perform their function. This review will discuss these stages of operation, including fluidic handling, which assures that the desired fluid arrives at a specific location at the right time and under the appropriate flow conditions; molecular recognition, which allows the capture of specific analytes at precise locations on the chip; transduction of the molecular recognition event into a measurable signal; sample preparation upstream from analyte capture; and signal amplification procedures to increase sensitivity. Seamless integration of the different stages is required to achieve a point-of-care/point-of-use lab-on-chip device that allows analyte detection at the relevant sensitivity ranges, with a competitive analysis time and cost. PMID:27365042

HRMS sky survey wideband feed system design for DSS 24 beam waveguide antenna

NASA Technical Reports Server (NTRS)

Stanton, P. H.; Lee, P. R.; Reilly, H. F.

1993-01-01

The High-Resolution Microwave Survey (HRMS) Sky Survey project will be implemented on the DSS 24 beam waveguide (BWG) antenna over the frequency range of 2.86 to 10 GHz. Two wideband, ring-loaded, corrugated feed horns were designed to cover this range. The horns match the frequency-dependent gain requirements for the DSS 24 BWG system. The performance of the feed horns and the calculated system performance of DSS 24 are presented.

Compressor bleed cooling fluid feed system

DOEpatents

Donahoo, Eric E; Ross, Christopher W

2014-11-25

A compressor bleed cooling fluid feed system for a turbine engine for directing cooling fluids from a compressor to a turbine airfoil cooling system to supply cooling fluids to one or more airfoils of a rotor assembly is disclosed. The compressor bleed cooling fluid feed system may enable cooling fluids to be exhausted from a compressor exhaust plenum through a downstream compressor bleed collection chamber and into the turbine airfoil cooling system. As such, the suction created in the compressor exhaust plenum mitigates boundary layer growth along the inner surface while providing flow of cooling fluids to the turbine airfoils.

KSC-2012-2585

NASA Image and Video Library

2012-04-09

CAPE CANAVERAL, Fla. – Aboard NASA’s Freedom Star boat in the Atlantic Ocean off the coast of Port Canaveral in Florida, the covering around NASA’s Mobile Aerospace Reconnaissance System, or MARS, has been removed. MARS is being prepared for a day of testing in the Atlantic Ocean. MARS, run by NASA’s Langley Research Center in Hampton, Va., with its spatial, hyperspectral, thermal, and directed energy capabilities will be used for thermal imaging testing for the upcoming SpaceX Falcon 9 and Dragon capsule test flight to the International Space Station. During today’s test, the MARS X-band radar and kineto tracking mount KTM were tested to ensure that they were synchronized to receive a rocket launch feed. The radar was used to identify an object to see if the KTM could lock on to and track it. The MARS team performed maintenance on the system, confirmed communications links, and tested the design of the mounting system and environmental enclosure. Photo credit: NASA/Cory Huston

KSC-2012-2580

NASA Image and Video Library

2012-04-09

CAPE CANAVERAL, Fla. – Aboard NASA’s Freedom Star boat in the Atlantic Ocean off the coast of Port Canaveral in Florida, the covering around NASA’s Mobile Aerospace Reconnaissance System, or MARS, has been removed. MARS is being prepared for a day of testing in the Atlantic Ocean. MARS, run by NASA’s Langley Research Center in Hampton, Va., with its spatial, hyperspectral, thermal, and directed energy capabilities will be used for thermal imaging testing for the upcoming SpaceX Falcon 9 and Dragon capsule test flight to the International Space Station. During today’s test, the MARS X-band radar and kineto tracking mount KTM were tested to ensure that they were synchronized to receive a rocket launch feed. The radar was used to identify an object to see if the KTM could lock on to and track it. The MARS team performed maintenance on the system, confirmed communications links, and tested the design of the mounting system and environmental enclosure. Photo credit: NASA/Cory Huston

KSC-2012-1978

NASA Image and Video Library

2012-04-09

CAPE CANAVERAL, Fla. -- NASA’s Mobile Aerospace Reconnaissance System, or MARS, is secured aboard NASA’s Freedom Star boat near Hangar AE at Cape Canaveral Air Force Station in Florida. MARS is being prepared for a day of testing after departing from Port Canaveral out to the Atlantic Ocean. MARS, run by NASA’s Langley Research Center in Hampton, Va., with its spatial, hyperspectral, thermal, and directed energy capabilities will be used for thermal imaging testing for the upcoming SpaceX Falcon 9 and Dragon capsule test flight to the International Space Station. During today’s test, the MARS X-band radar and kineto tracking mount KTM were tested to ensure that they were synchronized to receive a rocket launch feed. The radar was used to identify an object to see if the KTM could lock on to and track it. The MARS team performed maintenance on the system, confirmed communications links, and tested the design of the mounting system and environmental enclosure. Photo credit: NASA/Jim Grossmann

KSC-2012-1977

NASA Image and Video Library

2012-04-09

CAPE CANAVERAL, Fla. -- NASA’s Mobile Aerospace Reconnaissance System, or MARS, is secured aboard NASA’s Freedom Star boat near Hangar AE at Cape Canaveral Air Force Station in Florida. MARS is being prepared for a day of testing after departing from Port Canaveral out to the Atlantic Ocean. MARS, run by NASA’s Langley Research Center in Hampton, Va., with its spatial, hyperspectral, thermal, and directed energy capabilities will be used for thermal imaging testing for the upcoming SpaceX Falcon 9 and Dragon capsule test flight to the International Space Station. During today’s test, the MARS X-band radar and kineto tracking mount KTM were tested to ensure that they were synchronized to receive a rocket launch feed. The radar was used to identify an object to see if the KTM could lock on to and track it. The MARS team performed maintenance on the system, confirmed communications links, and tested the design of the mounting system and environmental enclosure. Photo credit: NASA/Jim Grossmann

KSC-2012-2581

NASA Image and Video Library

2012-04-09

CAPE CANAVERAL, Fla. – Aboard NASA’s Freedom Star boat in the Atlantic Ocean off the coast of Port Canaveral in Florida, the covering around NASA’s Mobile Aerospace Reconnaissance System, or MARS, has been removed. MARS is being prepared for a day of testing in the Atlantic Ocean. MARS, run by NASA’s Langley Research Center in Hampton, Va., with its spatial, hyperspectral, thermal, and directed energy capabilities will be used for thermal imaging testing for the upcoming SpaceX Falcon 9 and Dragon capsule test flight to the International Space Station. During today’s test, the MARS X-band radar and kineto tracking mount KTM were tested to ensure that they were synchronized to receive a rocket launch feed. The radar was used to identify an object to see if the KTM could lock on to and track it. The MARS team performed maintenance on the system, confirmed communications links, and tested the design of the mounting system and environmental enclosure. Photo credit: NASA/Cory Huston

KSC-2012-2586

NASA Image and Video Library

2012-04-09

CAPE CANAVERAL, Fla. – Aboard NASA’s Freedom Star boat in the Atlantic Ocean off the coast of Port Canaveral in Florida, the covering around NASA’s Mobile Aerospace Reconnaissance System, or MARS, has been removed. MARS is being prepared for a day of testing in the Atlantic Ocean. MARS, run by NASA’s Langley Research Center in Hampton, Va., with its spatial, hyperspectral, thermal, and directed energy capabilities will be used for thermal imaging testing for the upcoming SpaceX Falcon 9 and Dragon capsule test flight to the International Space Station. During today’s test, the MARS X-band radar and kineto tracking mount KTM were tested to ensure that they were synchronized to receive a rocket launch feed. The radar was used to identify an object to see if the KTM could lock on to and track it. The MARS team performed maintenance on the system, confirmed communications links, and tested the design of the mounting system and environmental enclosure. Photo credit: NASA/Cory Huston

Development of an Ion Thruster and Power Processor for New Millennium's Deep Space 1 Mission

NASA Technical Reports Server (NTRS)

Sovey, James S.; Hamley, John A.; Haag, Thomas W.; Patterson, Michael J.; Pencil, Eric J.; Peterson, Todd T.; Pinero, Luis R.; Power, John L.; Rawlin, Vincent K.; Sarmiento, Charles J.;

Modelling and Analysis of the Feeding Regimen Induced Entrainment of Hepatocyte Circadian Oscillators Using Petri Nets

PubMed Central

Tareen, Samar Hayat Khan; Ahmad, Jamil

2015-01-01

Circadian rhythms are certain periodic behaviours exhibited by living organism at different levels, including cellular and system-wide scales. Recent studies have found that the circadian rhythms of several peripheral organs in mammals, such as the liver, are able to entrain their clocks to received signals independent of other system level clocks, in particular when responding to signals generated during feeding. These studies have found SIRT1, PARP1, and HSF1 proteins to be the major influencers of the core CLOCKBMAL1:PER-CRY circadian clock. These entities, along with abstracted feeding induced signals were modelled collectively in this study using Petri Nets. The properties of the model show that the circadian system itself is strongly robust, and is able to continually evolve. The modelled feeding regimens suggest that the usual 3 meals/day and 2 meals/day feeding regimens are beneficial with any more or less meals/day negatively affecting the system. PMID:25789928

[The influence of mourning on feeding habits and its implications for nutritional behavior].

PubMed

Campos, Maria Teresa Fialho de Sousa

2013-09-01

The lack of preparation for dealing with death and the absence of the loved one may lead to organic and psychological reactions that, due to the adaptive capacity of the individual to the period of mourning, may result in interference in feeding habits and consequently on the person's nutritional status. This article addresses the effects of recent mourning on feeding behavior, followed by the analysis of the dietary interview from various standpoints. This includes the postmortem nutrition and feeding habits of the bereaved and the implications of this process on hunger, on thirst and on family cooking, with a focus on nutritional behavior and on the decisions that surround it. This is a review of the literature on the theme of death and mourning, which seeks to contextualize this theme around reflections based on this experience. It emphasizes the interaction of nutrition with the science of thanatology, which is an area still not properly examined and lacking study. The identification of this influence and its implications enables better planning of food strategies, contributing greatly to actions for coping and support during mourning.

Simultaneous determination of diaveridine, trimethoprim and ormetoprim in feed using high performance liquid chromatography tandem mass spectrometry.

PubMed

Yang, Ya-Jun; Liu, Xi-Wang; Li, Bing; Li, Shi-Hong; Kong, Xiao-Jun; Qin, Zhe; Li, Jian-Yong

2016-12-01

This study developed and validated a simple and reliable method for detecting and quantifying DVD, TMP and OMP in feed using dichloromethane extraction followed by HPLC-MS/MS. A matrix effect evaluation was performed using the post-extraction spiking method, and levels were less than ±15% in all three feeds with their corresponding concentrations. LOD and LOQ, CCα and CCβ were 20μgkg(-1) and 40μgkg(-1), 8.68-15.55μgkg(-1) and 10.61-18.92μgkg(-1) for all analytes, respectively. Calibration curves were linear for DVD, TMP and OMP with R(2)⩾0.990 and r⩾0.995, respectively. Recoveries of low, medium and high concentrations using the proposed method ranged from 74.4 to 105.2%. Repeatability and within-laboratory reproducibility were <7.4% (RSD). The chosen seven factors had no a significant influence on robustness. The method showed good performance when it was applied to analyze other laboratory-prepared or actual feed samples. Copyright © 2016 Elsevier Ltd. All rights reserved.

Investigation of the fuel feed line failures on the Space Shuttle main engine

NASA Technical Reports Server (NTRS)

Larson, E. W.

1980-01-01

The Space Shuttle Main Engine (SSME) development program experienced two similar appearing fuel feed line failures during the shutdown portion of two engine tests. Failure investigations into each incident showed that a few cycles of high-amplitude transient strain occurring during the start and cutoff portions of each test could have either accumulated damage and led to a fatigue failure after 46 tests, or caused rupture in a low-strength weld joint. The cause of the high strain was traced to a period of unsteady flow separation during the start and cutoff of each test coincident with the oblique shock approaching the nozzle exit. Since elimination of the flow separation was impractical, the steps taken to allow engine development and flight preparations to continue were: (1) establish the safe operating life of the nozzle, (2) reinforce all low-strength welds, and (3) eliminate the use of thin-wall fuel feed lines. In parallel, the feed line was redesigned and fabrication was initiated on units to be incorporated into the development program.

Method of controlling crystallite size in nuclear-reactor fuels

DOEpatents

Lloyd, Milton H.; Collins, Jack L.; Shell, Sam E.

1985-01-01

Improved spherules for making enhanced forms of nuclear-reactor fuels are prepared by internal gelation procedures within a sol-gel operation and are accomplished by first boiling the concentrated HMTA-urea feed solution before engaging in the spherule-forming operation thereby effectively controlling crystallite size in the product spherules.

Pervaporation Separation of Water-Ethanol Mixtures Using Organic-Inorganic Nanocomposite Membranes

EPA Science Inventory

Preyssler type heteropolyacid viz., H14[NaP5W30O110] incorporated chitosan nanocomposite membranes (NCMs) were prepared by solution casting, characterized using a variety of techniques and employed in the pervaporation separation of water-ethanol mixtures as a function of feed wa...

The Canadian Defence Input-Output Model DIO Version 4.41

DTIC Science & Technology

2011-09-01

0841 Mineral water, fruit-flavoured beverages and ice 99 0842 Pasta products, excluding dry pasta 100 0843 Prepared meals 101 0850 Feed supplements and...junior foods, excluding in airtight containers 134 1136 Dry pasta 135 1140 Soft drink concentrates 136 1150 Carbonated soft drinks 137 1161 Distilled

A Guide to Energy Savings - For the Livestock Producer.

ERIC Educational Resources Information Center

Van Arsdall, Roy N.

This booklet gives a brief overview of energy use in livestock production and gives examples of cutting costs of field equipment use, grinding and preparing feed, managing range and herd, ventilating and heating, lighting, drying grain, and irrigating with sprinklers. Recordkeeping and estimating energy use is also discussed. (BB)

Applications of peanut skins as a functional food ingredient

USDA-ARS?s Scientific Manuscript database

Peanut skins are a low-value byproduct of the peanut industry, with hundreds of thousands of tons being produced annually. Following their removal during the preparation of common peanut products, peanut skins are either discarded or used as a minor component of animal feed. Recent studies have fo...

Method of controlling crystallite size in nuclear-reactor fuels

DOEpatents

Lloyd, M.H.; Collins, J.L.; Shell, S.E.

Improved spherules for making enhanced forms of nuclear-reactor fuels are prepared by internal gelation procedures within a sol-gel operation and are accomplished by first boiling the concentrated HMTA-urea feed solution before engaging in the spherule-forming operation thereby effectively controlling crystallite size in the product spherules.

"Breastfeeding" but not at the breast: Mothers' descriptions of providing pumped human milk to their infants via other containers and caregivers.

PubMed

Felice, Julia P; Geraghty, Sheela R; Quaglieri, Caroline W; Yamada, Rei; Wong, Adriana J; Rasmussen, Kathleen M

2017-07-01

As pumping has become more prevalent among American women, pumped human milk (HM) is on the rise in their infants' diets in place of some or all feeding at the breast. We aimed to fill a gap in knowledge about mothers' motivations, practices and perceptions related to pumping, and about mothers' and other caregivers' motivations, practices, and perceptions related to feeding pumped HM. Results related to providing pumped HM are reported here, and results related to pumping are reported elsewhere. We conducted in-depth, semi-structured interviews among a diverse sample of mothers whose infants were fed pumped HM (n = 20), following each up to 1 year postpartum. Data were analyzed using thematic analysis with Atlas.ti. Nearly all mothers felt bottles were necessary to meet infant HM-feeding goals. Nearly all pumped HM was fed by other caregivers because mothers typically preferred and prioritized feeding at the breast for convenience and maintaining their milk supply. Infants were bottle-fed HM for several reasons that changed over time, such as mother's absence, latch difficulty, or desire to share the burden and bonding of feeding. Feeding practices differed between feeds from bottles versus at the breast; some infants were bottle-fed on schedules but fed at the breast on demand. Mothers' methods for storing, transporting, and preparing HM varied substantially and included practices associated with loss of nutrients and microbial contamination. Mothers' reasons for bottle-feeding HM may affect how much their infants are bottle-fed. Consumption of pumped HM may not provide the same benefits to infants as feeding at the breast. These findings highlight important avenues for future research into the relationships between bottle-feeding HM and infant health, growth, and developmental outcomes. © 2017 John Wiley & Sons Ltd.

Comparison through a LCA evaluation analysis of food waste disposal options from the perspective of global warming and resource recovery.

PubMed

Kim, Mi-Hyung; Kim, Jung-Wk

2010-09-01

This study evaluated feed manufacturing including dry feeding and wet feeding, composting, and landfilling for food waste disposal options from the perspective of global warming and resource recovery. The method of the expanded system boundaries was employed in order to compare different by-products. The whole stages of disposal involved in the systems such as separate discharge, collection, transportation, treatment, and final disposal, were included in the system boundary and evaluated. The Global Warming Potential generated from 1tonne of food wastes for each disposal system was analyzed by the life cycle assessment method. The results showed that 200kg of CO(2)-eq could be produced from dry feeding process, 61kg of CO(2)-eq from wet feeding process, 123kg of CO(2)-eq from composting process, and 1010kg of CO(2)-eq from landfilling. Feed manufacturing and composting, the common treatment methods currently employed, have been known to be environment friendlier than other methods. However, this study shows that they can negatively affect the environment if their by-products are not appropriately utilized as intended. Copyright 2010 Elsevier B.V. All rights reserved.

Genome-wide association study for feed efficiency traits using SNP and haplotype models

USDA-ARS?s Scientific Manuscript database

Feed costs comprise the majority of variable expenses in beef cattle systems making feed efficiency an important economic consideration within the beef industry. Due to the expense of recording individual feed intake phenotypes, a genomic-enabled approach could be advantageous towards improving this...

Identification of genomic regions associated with feed efficiency in Nelore cattle

USDA-ARS?s Scientific Manuscript database

Feed efficiency is jointly determined by productivity and feed requirements, both of which are economically relevant traits in beef cattle production systems. The objective of this study was to identify genes/QTLs associated with components of feed efficiency in Nelore cattle using Illumina BovineHD...

Effect of modulator sorption on gradient shape in ion-exchange chromatography

NASA Technical Reports Server (NTRS)

Velayudhan, A.; Ladisch, M. R.; Mitchell, C. A. (Principal Investigator)

1995-01-01

Mobile phase additives, or modulators, are used in gradient elution chromatography to facilitate separation and reduce separation time. The modulators are usually assumed to be linearly adsorbed or unadsorbed. Here, the consequences of nonlinear modulator adsorption are examined for ion-exchange gradient elution through a series of simulations. Even when the buffer salt is identical to the modulator salt, gradient deformation is observed; the extent of deformation increases as the volume of the feed is increased. When the modulator salt is different from the buffer salt, unusual effects are observed, and the chromatograms are quite different from those predicted by classical gradient elution theory. In particular, local increases in the buffer concentration are found between feed bands, and serve to improve the separation. These effects become more pronounced as the feed volume increases, and could therefore prove valuable in preparative applications.

Removal of Manganese from Solution using Polyamide Membrane

NASA Astrophysics Data System (ADS)

Mathaba, M.; Sithole, N.; Mashifana, T.

2018-03-01

The work demonstrates the performance of polyamide membrane in the removal of manganese ions from single salt aqueous solution simulating real acid mine drainage. The membrane was tested using a dead-end filtration cell with manganese sulphate was used to prepare a feed solution. The membrane flux and metal rejection was evaluated. Effect of operating parameters such as pH, initial feed concentration and pressure on membrane performance was investigated. The pressure was varied between 10 and 15 bar and it was observed that increasing the pressure increases the membrane flux. Acidic pH conditions contributed to the removal of the contaminate as Mn2+ ions are freely at low pH. The percentage rejection was found to be 63.5 to 77.6 % as concentration is increased from 290 ppm to 321 ppm for a feed solution. The membrane showed satisfactory results in removing metal ions from solution.

Separation of n-hexane/acetone mixtures by pervaporation using high density polyethylene/ethylene propylene diene terpolymer rubber blend membranes.

PubMed

Kumar, P V Anil; Anilkumar, S; Varughese, K T; Thomas, Sabu

2012-01-15

Polymer membranes were prepared by blending high density polyethylene (HDPE) with ethylene propylene diene terpolymer rubber (EPDM). These blend membranes were evaluated for the selective separation of n-hexane from acetone. The flux and selectivity of the membranes were determined both as a function of the blend composition and feed mixture composition. Results showed that polymer blending method could be very useful to develop new membranes with improved selectivity. Pervaporation properties could be optimized by adjusting the blend composition. The effects of blend ratio, feed composition, and penetrant size on the pervaporation process were analyzed. The permeation properties have been explained on the basis of interaction between the membrane and solvents and blend morphology. Flux increases with increasing alkane content in the feed composition. Copyright © 2011 Elsevier B.V. All rights reserved.

Solids feeder apparatus

DOEpatents

Bell, Jr., Harold S.

1979-01-01

This invention sets forth a double-acting piston, which carries a floating piston, and which is reciprocated in a housing, for feeding coal to a high pressure gasifier system. The housing has a plurality of solids (for instance: coal) in-feeding ports and a single discharge port, the latter port being in communication with a high pressure gasifier system. The double-acting piston sequentially and individually communicates each of the in-feeding ports with the discharge port. The floating piston both seals off the discharge port while each in-feeding port is receiving coal or the like, to prevent undue escape of gas from the gasifier system, and translates in the housing, following a discharge of coal or the like into the discharge port, to return gas which has been admitted into the housing back into the gasifier system.

Preparation of dietary fibre-enriched materials from preharvest dropped apples and their utilisation as a high-fibre flour substitute.

PubMed

Kim, Yujeong; Kim, Yongwook; Bae, In Young; Lee, Hyeon Gyu; Lee, Suyong

2013-06-01

Preharvest dropped apples from a weather disaster are generally discarded or used in animal feed due to reduced market value. In this study, they were utilised to produce dietary fibre-enriched materials (DFEMs) and their baking performance in a food system was then evaluated as a high-fibre and low-calorie flour substitute. Hydrothermal treatment and fractionation of preharvest dropped apple powder produced fibre-rich fractions (856.2 g kg(-1)). The use of DFEMs increased the pasting properties of wheat flour and improved dough mixing stability. When DFEMs were incorporated in the cookie formulation (2, 4 and 6 g dietary fibre per serving), the cookie dough exhibited increased elongational viscosity and solid-like behaviour which became more pronounced with increasing levels of DEFMs. After baking, reduced spread was observed in DFEM cookies which could be readily attributed to their rheological characteristics. However, greater moisture retention by DFEMs produced cookie samples with softer texture. DFEMs prepared from preharvest dropped apples could be successfully evaluated in a cookie model system as a high-fibre and low-calorie substitute for wheat flour. This study suggests a new value-added application of preharvest dropped fruits, positively extending their use for better healthful diets. © 2012 Society of Chemical Industry.

Water reactive hydrogen fuel cell power system

DOEpatents

Wallace, Andrew P; Melack, John M; Lefenfeld, Michael

2014-01-21

A water reactive hydrogen fueled power system includes devices and methods to combine reactant fuel materials and aqueous solutions to generate hydrogen. The generated hydrogen is converted in a fuel cell to provide electricity. The water reactive hydrogen fueled power system includes a fuel cell, a water feed tray, and a fuel cartridge to generate power for portable power electronics. The removable fuel cartridge is encompassed by the water feed tray and fuel cell. The water feed tray is refillable with water by a user. The water is then transferred from the water feed tray into a fuel cartridge to generate hydrogen for the fuel cell which then produces power for the user.

Water reactive hydrogen fuel cell power system

DOEpatents

Wallace, Andrew P; Melack, John M; Lefenfeld, Michael

2014-11-25

A water reactive hydrogen fueled power system includes devices and methods to combine reactant fuel materials and aqueous solutions to generate hydrogen. The generated hydrogen is converted in a fuel cell to provide electricity. The water reactive hydrogen fueled power system includes a fuel cell, a water feed tray, and a fuel cartridge to generate power for portable power electronics. The removable fuel cartridge is encompassed by the water feed tray and fuel cell. The water feed tray is refillable with water by a user. The water is then transferred from the water feed tray into the fuel cartridge to generate hydrogen for the fuel cell which then produces power for the user.

Feeding and gastrointestinal problems in children with cerebral palsy.

PubMed

Erkin, Gulten; Culha, Canan; Ozel, Sumru; Kirbiyik, Eylem Gulsen

2010-09-01

The aim of our study was to identify feeding and gastrointestinal system (GIS) problems in children with cerebral palsy (CP), and to evaluate the relationship between these problems and the severity of CP. A total of 120 children with CP were enrolled consecutively into the study (67 males, 53 females; mean age: 6.0±2.4 years; range: 2-12 years). The children were classified according to the Swedish classification as diplegic, hemiplegic, or quadriplegic. Severity of CP was classified based on the Gross Motor Function Classification System. The amount of time that the caregiver allocated to mealtimes, modifications of the food, as well as feeding and GIS problems was evaluated. Feeding dysfunction was classified as mild, moderate, or severe. Comparisons of GIS and feeding disorders and the severity of CP were carried out using χ test. The results indicated lack of appetite in 46 of the 120 children (38.3%), sialorrhea in 37 (30.8%), constipation in 30 (25%), difficulty in swallowing in 23 (19.2%), and feeding dysfunction in 26 (21.7%). On the basis of the Gross Motor Function Classification System (GMFCS), the incidence of GIS problems and feeding dysfunction was found to be significantly higher in the children classified in the severe group. The time taken to consume meals was significantly longer among children with feeding dysfunction. Feeding and GIS problems are frequent in children with CP, and more marked in those with severe CP. Approximately one fourth of children with CP suffer from feeding dysfunction, and more time has to be allocated to consume meals.

Reactions during melting of low-activity waste glasses and their effects on the retention of rhenium as a surrogate for technetium-99

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, Tongan; Kim, Dong-Sang; Tucker, Abigail E.

2015-10-01

Volatile loss of radioactive 99Tc to offgas is a concern with processing the low-activity waste (LAW) at Hanford site. We investigated the partitioning and incorporation of Re (a nonradioactive surrogate for 99Tc) into the glass melt during crucible melting of two simulated LAW feeds that resulted in a large difference in 99mTc/Re retention in glass from the small-scale melter tests. Each feed was prepared from a simulated liquid LAW and chemical and mineral additives (boric acid, silica sand, etc.). The as-mixed slurry feeds were dried at 105°C and heated to 600–1100°C at 5 K/min. The dried feeds and heat treatedmore » samples were leached with deionized water for 10 min at room temperature followed by 24-h leaching at 80°C. Chemical compositions of the resulting solutions and insoluble solids were analyzed. Volume expansion measurement and X-ray diffraction were performed on dried feeds and heat treated samples to characterize the progress of feed-to-glass conversion reactions. It was found that the incorporation of Re into glass melt virtually completed during the major feed-to-glass conversion reactions were going on at ≤ 700°C. The present results suggest that the different composition of the salt phase is responsible for the large difference in Re incorporation into glass melt during early stages of glass melting at ≤ 700°C. Additional studies with modified and simplified feeds are underway to understand the details on how the different salt composition affects the Re incorporation.« less

Breast-feeding, dietary intakes and their associations with subclinical vitamin A deficiency in children in Anhui Province, China.

PubMed

Zhang, Yewu; Tao, Fangbiao; Yin, Huiping; Zhu, Xiaoming; Ji, Guoping; Kong, Shenghua; Song, Qinhua; Chen, Jianhua; Chu, Chengzhi; Li, Zhu

2007-07-01

This study aimed to explore the associations between breast-feeding, dietary intakes and other related factors and subclinical vitamin A deficiency (SVAD) in children aged 0-5 years in an area in China where mild vitamin A deficiency (VAD) is found. Data were from a population-based cross-sectional study with 1052 children aged 0-5 years. SVAD cases were identified by the indicator of serum retinol

Effect of feed restriction on performance and postprandial nutrient metabolism in pigs co-infected with Mycoplasma hyopneumoniae and swine influenza virus.

PubMed

Le Floc'h, Nathalie; Deblanc, Céline; Cariolet, Roland; Gautier-Bouchardon, Anne V; Merlot, Elodie; Simon, Gaëlle

2014-01-01

As nutritional status and inflammation are strongly connected, feeding and nutritional strategies could be effective to improve the ability of pigs to cope with disease. The aims of this study were to investigate the impact of a feed restriction on the ability of pigs to resist and be tolerant to a coinfection with Mycoplasma hyopneumoniae (Mhp) and the European H1N1 swine influenza virus, and the consequences for nutrient metabolism, with a focus on amino acids. Two groups of specific pathogen-free pigs were inoculated with Mhp and H1N1 21 days apart. One group was fed ad libitum, the other group was subjected to a two-week 40% feed restriction starting one week before H1N1 infection. The two respective mock control groups were included. Three days post-H1N1 infection, 200 g of feed was given to pigs previously fasted overnight and serial blood samples were taken over 4 hours to measure plasma nutrient concentrations. Throughout the study, clinical signs were observed and pathogens were detected in nasal swabs and lung tissues. Feed-restricted pigs presented shorter hyperthermia and a positive mean weight gain over the 3 days post-H1N1 infection whereas animals fed ad libitum lost weight. Both infection and feed restriction reduced postprandial glucose concentrations, indicating changes in glucose metabolism. Post-prandial plasma concentrations of the essential amino acids histidine, arginine and threonine were lower in co-infected pigs suggesting a greater use of those amino acids for metabolic purposes associated with the immune response. Altogether, these results indicate that modifying feeding practices could help to prepare animals to overcome an influenza infection. Connections with metabolism changes are discussed.

Effect of Feed Restriction on Performance and Postprandial Nutrient Metabolism in Pigs Co-Infected with Mycoplasma hyopneumoniae and Swine Influenza Virus

PubMed Central

Cariolet, Roland; Gautier-Bouchardon, Anne V.; Merlot, Elodie; Simon, Gaëlle

2014-01-01

As nutritional status and inflammation are strongly connected, feeding and nutritional strategies could be effective to improve the ability of pigs to cope with disease. The aims of this study were to investigate the impact of a feed restriction on the ability of pigs to resist and be tolerant to a coinfection with Mycoplasma hyopneumoniae (Mhp) and the European H1N1 swine influenza virus, and the consequences for nutrient metabolism, with a focus on amino acids. Two groups of specific pathogen-free pigs were inoculated with Mhp and H1N1 21 days apart. One group was fed ad libitum, the other group was subjected to a two-week 40% feed restriction starting one week before H1N1 infection. The two respective mock control groups were included. Three days post-H1N1 infection, 200 g of feed was given to pigs previously fasted overnight and serial blood samples were taken over 4 hours to measure plasma nutrient concentrations. Throughout the study, clinical signs were observed and pathogens were detected in nasal swabs and lung tissues. Feed-restricted pigs presented shorter hyperthermia and a positive mean weight gain over the 3 days post-H1N1 infection whereas animals fed ad libitum lost weight. Both infection and feed restriction reduced postprandial glucose concentrations, indicating changes in glucose metabolism. Post-prandial plasma concentrations of the essential amino acids histidine, arginine and threonine were lower in co-infected pigs suggesting a greater use of those amino acids for metabolic purposes associated with the immune response. Altogether, these results indicate that modifying feeding practices could help to prepare animals to overcome an influenza infection. Connections with metabolism changes are discussed. PMID:25101681

Mechanically scanned deployable antenna study

NASA Technical Reports Server (NTRS)

1983-01-01

The conceptual design of a Mechanically Scanned Deployable Antenna which is launched by the STS (Space Shuttle) to provide radiometric brightness temperature maps of the Earth and oceans at selected frequency bands in the frequency range of 1.4 GHz to 11 GHz is presented. Unlike previous scanning radiometric systems, multiple radiometers for each frequency are required in order to fill in the resolution cells across the swath created by the 15 meter diameter spin stabilized system. This multiple beam radiometric system is sometimes designated as a ""whiskbroom'' system in that it combines the techniques of the scanning and ""pushbroom'' type systems. The definition of the feed system including possible feed elements and location, determination of the fundamental reflector feed offset geometry including offset angles and f/D ratio, preliminary estimates of the beam efficiency of the feed reflector system, a summary of reflector mesh losses at the proposed radiometric frequency bands, an overall conceptual configuration design and preliminary structural and thermal analyses are included.

Do the venous blood samples replicate malaria parasite densities found in capillary blood? A field study performed in naturally-infected asymptomatic children in Cameroon.

PubMed

Sandeu, Maurice M; Bayibéki, Albert N; Tchioffo, Majoline T; Abate, Luc; Gimonneau, Geoffrey; Awono-Ambéné, Parfait H; Nsango, Sandrine E; Diallo, Diadier; Berry, Antoine; Texier, Gaétan; Morlais, Isabelle

2017-08-17

The measure of new drug- or vaccine-based approaches for malaria control is based on direct membrane feeding assays (DMFAs) where gametocyte-infected blood samples are offered to mosquitoes through an artificial feeder system. Gametocyte donors are identified by the microscopic detection and quantification of malaria blood stages on blood films prepared using either capillary or venous blood. However, parasites are known to sequester in the microvasculature and this phenomenon may alter accurate detection of parasites in blood films. The blood source may then impact the success of mosquito feeding experiments and investigations are needed for the implementation of DMFAs under natural conditions. Thick blood smears were prepared from blood obtained from asymptomatic children attending primary schools in the vicinity of Mfou (Cameroon) over four transmission seasons. Parasite densities were determined microscopically from capillary and venous blood for 137 naturally-infected gametocyte carriers. The effect of the blood source on gametocyte and asexual stage densities was then assessed by fitting cumulative link mixed models (CLMM). DMFAs were performed to compare the infectiousness of gametocytes from the different blood sources to mosquitoes. Prevalence of Plasmodium falciparum asexual stages among asymptomatic children aged from 4 to 15 years was 51.8% (2116/4087). The overall prevalence of P. falciparum gametocyte carriage was 8.9% and varied from one school to another. No difference in the density of gametocyte and asexual stages was found between capillary and venous blood. Attempts to perform DMFAs with capillary blood failed. Plasmodium falciparum malaria parasite densities do not differ between capillary and venous blood in asymptomatic subjects for both gametocyte and trophozoite stages. This finding suggests that the blood source should not interfere with transmission efficiency in DMFAs.

Glass sample preparation and performance investigations

NASA Astrophysics Data System (ADS)

Johnson, R. Barry

1992-04-01

This final report details the work performed under this delivery order from April 1991 through April 1992. The currently available capabilities for integrated optical performance modeling at MSFC for large and complex systems such as AXAF were investigated. The Integrated Structural Modeling (ISM) program developed by Boeing for the U.S. Air Force was obtained and installed on two DECstations 5000 at MSFC. The structural, thermal and optical analysis programs available in ISM were evaluated. As part of the optomechanical engineering activities, technical support was provided in the design of support structure, mirror assembly, filter wheel assembly and material selection for the Solar X-ray Imager (SXI) program. As part of the fabrication activities, a large number of zerodur glass samples were prepared in different sizes and shapes for acid etching, coating and polishing experiments to characterize the subsurface damage and stresses produced by the grinding and polishing operations. Various optical components for AXAF video microscope and the x-ray test facility were also fabricated. A number of glass fabrication and test instruments such as a scatter plate interferometer, a gravity feed saw and some phenolic cutting blades were fabricated, integrated and tested.

Subclinical Ketosis on Dairy Cows in Transition Period in Farms with Contrasting Butyric Acid Contents in Silages

PubMed Central

Rodríguez, María Luisa; Martínez-Fernández, Adela; Soldado, Ana; Argamentería, Alejandro; Peláez, Mario; de la Roza-Delgado, Begoña

2014-01-01

This study examines the relationship between subclinical ketosis (SCK) in dairy cows and the butyric acid content of the silage used in their feeding. Twenty commercial farms were monitored over a period of 12 months. The feed at each farm and the silages used in its ration were sampled monthly for proximal analysis and for volatile fatty acid analysis. A total of 2857 urine samples were taken from 1112 cows to examine the ketonuria from about 30 days prepartum to 100 postpartum. Wide variation was recorded in the quality of silages used in the preparation of diets. Approximately 80% of the urine samples analyzed had no detectable ketone bodies, 16% returned values indicative of slight SCK, and the remainder, 4%, showed symptoms of ketosis. Most of the cases of hyperkenuria were associated with the butyric acid content of the silage used (r 2 = 0.56; P < 0.05). As the metabolizable energy content of the feed was similar, no relationship was observed between the proportion of cows with SCK and the energy content of the feed. In our study, the probability of dairy cows suffering SCK is higher when they are eating feed made from silage with a high butyric acid content (35.2 g/kg DM intake). PMID:25525616

Subclinical ketosis on dairy cows in transition period in farms with contrasting butyric acid contents in silages.

PubMed

Vicente, Fernando; Rodríguez, María Luisa; Martínez-Fernández, Adela; Soldado, Ana; Argamentería, Alejandro; Peláez, Mario; de la Roza-Delgado, Begoña

2014-01-01

This study examines the relationship between subclinical ketosis (SCK) in dairy cows and the butyric acid content of the silage used in their feeding. Twenty commercial farms were monitored over a period of 12 months. The feed at each farm and the silages used in its ration were sampled monthly for proximal analysis and for volatile fatty acid analysis. A total of 2857 urine samples were taken from 1112 cows to examine the ketonuria from about 30 days prepartum to 100 postpartum. Wide variation was recorded in the quality of silages used in the preparation of diets. Approximately 80% of the urine samples analyzed had no detectable ketone bodies, 16% returned values indicative of slight SCK, and the remainder, 4%, showed symptoms of ketosis. Most of the cases of hyperkenuria were associated with the butyric acid content of the silage used (r2=0.56; P<0.05). As the metabolizable energy content of the feed was similar, no relationship was observed between the proportion of cows with SCK and the energy content of the feed. In our study, the probability of dairy cows suffering SCK is higher when they are eating feed made from silage with a high butyric acid content (35.2 g/kg DM intake).

Chronic anorexia nervosa: enteral nutrition via percutaneous endoscopic gastrostomy and liaison psychiatry.

PubMed

Malfi, G; Agnello, E; Da Pont, M C; Palmo, A; Zullo, G; Monero, A; Macario, P F; Sterpone, S; Munno, D

2006-12-01

Anorexia nervosa is a complex mental disorder characterized by altered eating behaviour often resulting in life-threatening weight loss (<85% of expected body weight) associated with amenorrhea and a disturbance of body image. Although classified as mental health disorders, they may lead to serious medical consequences and have the highest rate of premature death of any mental health diagnosis. We report our experience with the use of enteral feeding via percutaneous endoscopic gastrostomy in a 39-year-old woman with chronic restricter anorexia nervosa treated in liaison psychiatry and psychotherapy. On admission to psychiatry unit, the patient presented seriously deteriorated general condition and a body mass index (BMI) of 10 (BMI = weight kg/height m(2)). She refused oral feeding, but eventually accepted nasogastric feeding. In preparation for her continuing long-term (>1 month) enteral feeding at home, a percutaneous endoscopic gastrostomy was performed and a home nutrition support regimen that met her energy-protein intake requirements was prescribed. During the follow-up period, an overall improvement in nutritional status, general condition, mood and cognitive functioning was observed. Patient compliance with refeeding is notoriously problematic; however, enteral feeding interventions may be feasible in the long-term treatment of selected anorexia nervosa patients when closely followed-up by a multidisciplinary medical team.

Economic and environmental issues associated with confinement and pasture-based dairy systems

USDA-ARS?s Scientific Manuscript database

Milk is produced in a continuum of dairy systems from full confinement to full pasture grazing. Climate, available feeds, and milk price: feed cost ratio influence the preferred system. All dairy systems have an environmental impact and inputs to maximise profit may lead to pollution levels unacce...

Proceedings of the conference on Coal Feeding Systems

NASA Technical Reports Server (NTRS)

1977-01-01

Development of coal feed systems for coal gasification, fluidized bed combustion, and magnetohydrodynamic applications is discussed. Process operations experience, energy conversion efficiency, and environment effects are among the factors considered.

75 FR 3735 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-22

... Request; Medicated Feed Mill License Application AGENCY: Food and Drug Administration, HHS. ACTION: Notice... collection of information to OMB for review and clearance. Medicated Feed Mill License Application--(OMB... for the approval of specific medicated feed with a general licensing system for feed mills. Before...

Continuous feedings of fortified human milk lead to nutrient losses of fat, calcium, and phosphorous

USDA-ARS?s Scientific Manuscript database

Substantial losses of nutrients may occur during tube (gavage) feeding of fortified human milk. Our objective was to compare the losses of key macronutrients and minerals based on method of fortification, and gavage feeding method. We used clinically available gavage feeding systems and measured pre...

The Type of Forage Substrate Preparation Included as Substrate in a RUSITEC System Affects the Ruminal Microbiota and Fermentation Characteristics

PubMed Central

Duarte, Andrea C.; Holman, Devin B.; Alexander, Trevor W.; Durmic, Zoey; Vercoe, Philip E.; Chaves, Alexandre V.

2017-01-01

In vitro fermentation systems such as the rumen simulation technique (RUSITEC) are frequently used to assess dietary manipulations in livestock, thereby limiting the use of live animals. Despite being in use for nearly 40 years, improvements are continually sought in these systems to better reflect and mimic natural processes in ruminants. The aim of this study was to evaluate the effect of forage preparation, i.e., frozen minced (FM) and freeze-dried and ground (FDG), on the ruminal microbiota and on fermentation characteristics when included as a substrate in a RUSITEC system. A completely randomized design experiment was performed over a 15-day period, with 7 days of adaptation and an 8-day experimental period. Fermentation parameters (total gas, CH4, and volatile fatty acid production) were analyzed on a daily basis over the experimental period and the archaeal and bacterial microbiota (liquid-associated microbes [LAM] and solid-associated microbes [SAM] was assessed at 0, 5, 10, and 15 days using high-throughput sequencing of the 16S rRNA gene. Results from this study suggested a tendency (P = 0.09) of FM treatment to increase daily CH4 (mg/d) production by 16.7% when compared with FDG treatment. Of the major volatile fatty acids (acetate, propionate, and butyrate), only butyrate production was greater (P = 0.01) with FM treatment compared with FDG substrate. The archaeal and bacterial diversity and richness did not differ between the forage preparations, although feed particle size of the forage had a significant effect on microbial community structure in the SAM and LAM samples. The Bacteroidetes phylum was more relatively abundant in the FM substrate treatment, while Proteobacteria was enriched in the FDG treatment. At the genus-level, Butyrivibrio, Prevotella, and Roseburia were enriched in the FM substrate treatment and Campylobacter and Lactobacillus in the FDG substrate treatment. Evidence from this study suggests that forage preparation affects CH4 production, butyrate production, and the structure of the rumen microbiota during in vitro fermentation. PMID:28473826

Strain-specific antibodies reduce co-feeding transmission of the Lyme disease pathogen, Borrelia afzelii.

PubMed

Jacquet, Maxime; Durand, Jonas; Rais, Olivier; Voordouw, Maarten J

2016-03-01

Vector-borne pathogens use a diversity of strategies to evade the vertebrate immune system. Co-feeding transmission is a potential immune evasion strategy because the vector-borne pathogen minimizes the time spent in the vertebrate host. We tested whether the Lyme disease pathogen, Borrelia afzelii, can use co-feeding transmission to escape the acquired immune response in the vertebrate host. We induced a strain-specific, protective antibody response by immunizing mice with one of two variants of OspC (A3 and A10), the highly variable outer surface protein C of Borrelia pathogens. Immunized mice were challenged via tick bite with B. afzelii strains A3 or A10 and infested with larval ticks at days 2 and 34 post-infection to measure co-feeding and systemic transmission respectively. Antibodies against a particular OspC variant significantly reduced co-feeding transmission of the targeted (homologous) strain but not the non-targeted (heterologous) strain. Cross-immunity between OspC antigens had no effect in co-feeding ticks but reduced the spirochaete load twofold in ticks infected via systemic transmission. In summary, OspC-specific antibodies reduced co-feeding transmission of a homologous but not a heterologous strain of B. afzelii. Co-feeding transmission allowed B. afzelii to evade the negative consequences of cross-immunity on the tick spirochaete load. © 2015 Society for Applied Microbiology and John Wiley & Sons Ltd.

Identification and compensation of friction for a novel two-axis differential micro-feed system

NASA Astrophysics Data System (ADS)

Du, Fuxin; Zhang, Mingyang; Wang, Zhaoguo; Yu, Chen; Feng, Xianying; Li, Peigang

2018-06-01

Non-linear friction in a conventional drive feed system (CDFS) feeding at low speed is one of the main factors that lead to the complexity of the feed drive. The CDFS will inevitably enter or approach a non-linear creeping work area at extremely low speed. A novel two-axis differential micro-feed system (TDMS) is developed in this paper to overcome the accuracy limitation of CDFS. A dynamic model of TDMS is first established. Then, a novel all-component friction parameter identification method (ACFPIM) using a genetic algorithm (GA) to identify the friction parameters of a TDMS is introduced. The friction parameters of the ball screw and linear motion guides are identified independently using the method, assuring the accurate modelling of friction force at all components. A proportional-derivate feed drive position controller with an observer-based friction compensator is implemented to achieve an accurate trajectory tracking performance. Finally, comparative experiments demonstrate the effectiveness of the TDMS in inhibiting the disadvantageous influence of non-linear friction and the validity of the proposed identification method for TDMS.

Predicting the impact of feed spacer modification on biofouling by hydraulic characterization and biofouling studies in membrane fouling simulators.

PubMed

Siddiqui, A; Lehmann, S; Bucs, Sz S; Fresquet, M; Fel, L; Prest, E I E C; Ogier, J; Schellenberg, C; van Loosdrecht, M C M; Kruithof, J C; Vrouwenvelder, J S

2017-03-01

Feed spacers are an essential part of spiral-wound reverse osmosis (RO) and nanofiltration (NF) membrane modules. Geometric modification of feed spacers is a potential option to reduce the impact of biofouling on the performance of membrane systems. The objective of this study was to evaluate the biofouling potential of two commercially available reference feed spacers and four modified feed spacers. The spacers were compared on hydraulic characterization and in biofouling studies with membrane fouling simulators (MFSs). The virgin feed spacer was characterized hydraulically by their resistance, measured in terms of feed channel pressure drop, performed by operating MFSs at varying feed water flow rates. Short-term (9 days) biofouling studies were carried out with nutrient dosage to the MFS feed water to accelerate the biofouling rate. Long-term (96 days) biofouling studies were done without nutrient dosage to the MFS feed water. Feed channel pressure drop was monitored and accumulation of active biomass was quantified by adenosine tri phosphate (ATP) determination. The six feed spacers were ranked on pressure drop (hydraulic characterization) and on biofouling impact (biofouling studies). Significantly different trends in hydraulic resistance and biofouling impact for the six feed spacers were observed. The same ranking for biofouling impact on the feed spacers was found for the (i) short-term biofouling study with nutrient dosage and the (ii) long-term biofouling study without nutrient dosage. The ranking for hydraulic resistance for six virgin feed spacers differed significantly from the ranking of the biofouling impact, indicating that hydraulic resistance of clean feed spacers does not predict the hydraulic resistance of biofouled feed spacers. Better geometric design of feed spacers can be a suitable approach to minimize impact of biofouling in spiral wound membrane systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

Capacity of milk composition to identify the feeding system used to feed dairy cows.

PubMed

Vicente, Fernando; Santiago, Carme; Jiménez-Calderón, José D; Martínez-Fernández, Adela

2017-08-01

This Research Paper addresses the hypothesis that is possible to identify the type of feed used for dairy cows by means of the analysis of milk composition and the fatty acid profile of milk fat. Sixteen dairy farms were monitored during 1 year with quarterly visits between summer 2014 and spring 2015. Rations varied throughout the year due to annual dynamic change of forage production, forage rotation, variation of nutrient requirements according to physiological state of the animal, etc. The ingredients of the rations were analysed by cluster identifying five feeding systems based on the main ingredient of the diet: grazing, maize silage, grass silage, dry forage and concentrate. Milk composition could explain up to 91·3% of the total variability among feeding systems, while fatty acid profile could explain only up to 61·2% of total variability. However, when the sum of types of fatty acids and their ratios are taken, up to 93·5% of total variability could be explained. The maize silage system had the greatest milk yield, protein, solid non-fat and urea proportions, as well as the highest proportion of saturated fatty acid and lowest concentration of trans11 18 : 1, cis9 18 : 1 and 18 : 3 n3. Principal component analysis distinguishes the maize silage system from other feeding systems, both from milk composition and milk fatty acid profile. Concentrate system overlapped partially with the grazing, grass silage and dry forage systems. The latter systems had the highest concentrations of cis9 18 : 1, trans11 18 : 1 and 18 : 3, but there was no clear differentiation among them.

System-wide Benefits of Intermeal Fasting by Autophagy.

PubMed

Martinez-Lopez, Nuria; Tarabra, Elena; Toledo, Miriam; Garcia-Macia, Marina; Sahu, Srabani; Coletto, Luisa; Batista-Gonzalez, Ana; Barzilai, Nir; Pessin, Jeffrey E; Schwartz, Gary J; Kersten, Sander; Singh, Rajat

2017-12-05

Autophagy failure is associated with metabolic insufficiency. Although caloric restriction (CR) extends healthspan, its adherence in humans is poor. We established an isocaloric twice-a-day (ITAD) feeding model wherein ITAD-fed mice consume the same food amount as ad libitum controls but at two short windows early and late in the diurnal cycle. We hypothesized that ITAD feeding will provide two intervals of intermeal fasting per circadian period and induce autophagy. We show that ITAD feeding modifies circadian autophagy and glucose/lipid metabolism that correlate with feeding-driven changes in circulating insulin. ITAD feeding decreases adiposity and, unlike CR, enhances muscle mass. ITAD feeding drives energy expenditure, lowers lipid levels, suppresses gluconeogenesis, and prevents age/obesity-associated metabolic defects. Using liver-, adipose-, myogenic-, and proopiomelanocortin neuron-specific autophagy-null mice, we mapped the contribution of tissue-specific autophagy to system-wide benefits of ITAD feeding. Our studies suggest that consuming two meals a day without CR could prevent the metabolic syndrome. Copyright © 2017 Elsevier Inc. All rights reserved.

Humpback whale “super-groups” – A novel low-latitude feeding behaviour of Southern Hemisphere humpback whales (Megaptera novaeangliae) in the Benguela Upwelling System

PubMed Central

Seakamela, S. Mduduzi; Meÿer, Michael A.; Kirkman, Stephen P.; Barendse, Jaco; Cade, David E.; Hurwitz, David; Kennedy, Amy S.; Kotze, Pieter G. H.; McCue, Steven A.; Thornton, Meredith; Vargas-Fonseca, O. Alejandra; Wilke, Christopher G.

2017-01-01

Southern Hemisphere humpback whales (Megaptera novaeangliae) generally undertake annual migrations from polar summer feeding grounds to winter calving and nursery grounds in subtropical and tropical coastal waters. Evidence for such migrations arises from seasonality of historic whaling catches by latitude, Discovery and natural mark returns, and results of satellite tagging studies. Feeding is generally believed to be limited to the southern polar region, where Antarctic krill (Euphausia superba) has been identified as the primary prey item. Non-migrations and / or suspended migrations to the polar feeding grounds have previously been reported from a summer presence of whales in the Benguela System, where feeding on euphausiids (E. lucens), hyperiid amphipods (Themisto gaudichaudii), mantis shrimp (Pterygosquilla armata capensis) and clupeid fish has been described. Three recent research cruises (in October/November 2011, October/November 2014 and October/November 2015) identified large tightly-spaced groups (20 to 200 individuals) of feeding humpback whales aggregated over at least a one-month period across a 220 nautical mile region of the southern Benguela System. Feeding behaviour was identified by lunges, strong milling and repetitive and consecutive diving behaviours, associated bird and seal feeding, defecations and the pungent “fishy” smell of whale blows. Although no dedicated prey sampling could be carried out within the tightly spaced feeding aggregations, observations of E. lucens in the region of groups and the full stomach contents of mantis shrimp from both a co-occurring predatory fish species (Thyrsites atun) and one entangled humpback whale mortality suggest these may be the primary prey items of at least some of the feeding aggregations. Reasons for this recent novel behaviour pattern remain speculative, but may relate to increasing summer humpback whale abundance in the region. These novel, predictable, inter-annual, low latitude feeding events provide considerable potential for further investigation of Southern Hemisphere humpback feeding behaviours in these relatively accessible low-latitude waters. PMID:28249036

Humpback whale "super-groups" - A novel low-latitude feeding behaviour of Southern Hemisphere humpback whales (Megaptera novaeangliae) in the Benguela Upwelling System.

PubMed

Findlay, Ken P; Seakamela, S Mduduzi; Meÿer, Michael A; Kirkman, Stephen P; Barendse, Jaco; Cade, David E; Hurwitz, David; Kennedy, Amy S; Kotze, Pieter G H; McCue, Steven A; Thornton, Meredith; Vargas-Fonseca, O Alejandra; Wilke, Christopher G

2017-01-01

Southern Hemisphere humpback whales (Megaptera novaeangliae) generally undertake annual migrations from polar summer feeding grounds to winter calving and nursery grounds in subtropical and tropical coastal waters. Evidence for such migrations arises from seasonality of historic whaling catches by latitude, Discovery and natural mark returns, and results of satellite tagging studies. Feeding is generally believed to be limited to the southern polar region, where Antarctic krill (Euphausia superba) has been identified as the primary prey item. Non-migrations and / or suspended migrations to the polar feeding grounds have previously been reported from a summer presence of whales in the Benguela System, where feeding on euphausiids (E. lucens), hyperiid amphipods (Themisto gaudichaudii), mantis shrimp (Pterygosquilla armata capensis) and clupeid fish has been described. Three recent research cruises (in October/November 2011, October/November 2014 and October/November 2015) identified large tightly-spaced groups (20 to 200 individuals) of feeding humpback whales aggregated over at least a one-month period across a 220 nautical mile region of the southern Benguela System. Feeding behaviour was identified by lunges, strong milling and repetitive and consecutive diving behaviours, associated bird and seal feeding, defecations and the pungent "fishy" smell of whale blows. Although no dedicated prey sampling could be carried out within the tightly spaced feeding aggregations, observations of E. lucens in the region of groups and the full stomach contents of mantis shrimp from both a co-occurring predatory fish species (Thyrsites atun) and one entangled humpback whale mortality suggest these may be the primary prey items of at least some of the feeding aggregations. Reasons for this recent novel behaviour pattern remain speculative, but may relate to increasing summer humpback whale abundance in the region. These novel, predictable, inter-annual, low latitude feeding events provide considerable potential for further investigation of Southern Hemisphere humpback feeding behaviours in these relatively accessible low-latitude waters.

Pneumatic Planetary Regolith Feed System for In-Situ Resource Utilization

NASA Technical Reports Server (NTRS)

Mantovani, James G.; Mueller, Robert P.; Townsend, Ivan I.; Craft, Jack; Zacny, Kris

2010-01-01

The NASA In-situ Resource Utilization (ISRU) project requires a regolith feed system that can transfer lunar regolith several meters vertically into a chemical reactor for oxygen production on the moon.

Extraction of Trivalent Actinides and Lanthanides from Californium Campaign Rework Solution Using TODGA-based Solvent Extraction System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benker, Dennis; Delmau, Laetitia Helene; Dryman, Joshua Cory

This report presents the studies carried out to demonstrate the possibility of quantitatively extracting trivalent actinides and lanthanides from highly acidic solutions using a neutral ligand-based solvent extraction system. These studies stemmed from the perceived advantage of such systems over cationexchange- based solvent extraction systems that require an extensive feed adjustment to make a low-acid feed. The targeted feed solutions are highly acidic aqueous phases obtained after the dissolution of curium targets during a californium (Cf) campaign. Results obtained with actual Cf campaign solutions, but highly diluted to be manageable in a glove box, are presented, followed by results ofmore » tests run in the hot cells with Cf campaign rework solutions. It was demonstrated that a solvent extraction system based on the tetraoctyl diglycolamide molecule is capable of quantitatively extracting trivalent actinides from highly acidic solutions. This system was validated using actual feeds from a Cf campaign.« less

Technical note: Data loggers are a valid method for assessing the feeding behavior of dairy cows using the Calan Broadbent Feeding System.

PubMed

Krawczel, P D; Klaiber, L M; Thibeau, S S; Dann, H M

2012-08-01

Assessing feeding behavior is important in understanding the effects of nutrition and management on the well-being of dairy cows. Historically, collection of these data from cows fed with a Calan Broadbent Feeding System (American Calan Inc., Northwood, NH) required the labor-intensive practices of direct observation or video review. The objective of this study was to evaluate the agreement between the output of a HOBO change-of-state data logger (Onset Computer Corp., Bourne, MA), mounted to the door shell and latch plate, and video data summarized with continuous sampling. Data (number of feed bin visits per day and feeding time in minutes per day) were recorded with both methods from 26 lactating cows and 10 nonlactating cows for 3 d per cow (n=108). The agreement of the data logger and video methods was evaluated using the REG procedure of SAS to compare the mean response of the methods against the difference between the methods. The maximum allowable difference (MAD) was set at ±3 for bin visits and ±20 min for feeding time. Ranges for feed bin visits (2 to 140 per d) and feeding time (28 to 267 min/d) were established from video data. Using the complete data set, agreement was partially established between the data logger and video methods for feed bin visits, but not established for feeding time. The complete data set generated by the data logger was screened to remove visits of a duration ≤3 s, reflecting a cow unable to enter a feed bin (representing 7% of all data) and ≥5,400 s, reflecting a failure of the data logger to align properly with its corresponding magnetic field (representing <1% of all data). Using the resulting screened data set, agreement was established for feed bin visits and feeding time. For bin visits, 4% of the data was beyond the MAD. For feeding time, 3% of the data was beyond the MAD and 74% of the data was ±1 min. The insignificant P-value, low coefficient of determination, and concentration of the data within the MAD indicate the agreement of the change-of-state data logger and video data. This suggests the usage of a change-of-state data logger to assess the feeding behavior of cows feeding from a Calan Broadbent Feeding System is appropriate. Use of the screening criteria for data analysis is recommended. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Co-feeding transmission facilitates strain coexistence in Borrelia burgdorferi, the Lyme disease agent.

PubMed

States, S L; Huang, C I; Davis, S; Tufts, D M; Diuk-Wasser, M A

2017-06-01

Coexistence of multiple tick-borne pathogens or strains is common in natural hosts and can be facilitated by resource partitioning of the host species, within-host localization, or by different transmission pathways. Most vector-borne pathogens are transmitted horizontally via systemic host infection, but transmission may occur in the absence of systemic infection between two vectors feeding in close proximity, enabling pathogens to minimize competition and escape the host immune response. In a laboratory study, we demonstrated that co-feeding transmission can occur for a rapidly-cleared strain of Borrelia burgdorferi, the Lyme disease agent, between two stages of the tick vector Ixodes scapularis while feeding on their dominant host, Peromyscus leucopus. In contrast, infections rapidly became systemic for the persistently infecting strain. In a field study, we assessed opportunities for co-feeding transmission by measuring co-occurrence of two tick stages on ears of small mammals over two years at multiple sites. Finally, in a modeling study, we assessed the importance of co-feeding on R 0 , the basic reproductive number. The model indicated that co-feeding increases the fitness of rapidly-cleared strains in regions with synchronous immature tick feeding. Our results are consistent with increased diversity of B. burgdorferi in areas of higher synchrony in immature feeding - such as the midwestern United States. A higher relative proportion of rapidly-cleared strains, which are less human pathogenic, would also explain lower Lyme disease incidence in this region. Finally, if co-feeding transmission also occurs on refractory hosts, it may facilitate the emergence and persistence of new pathogens with a more limited host range. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Regular monitoring of breast-feeding rates: feasible and sustainable. The Emilia-Romagna experience.

PubMed

Di Mario, Simona; Borsari, Silvana; Verdini, Eleonora; Battaglia, Sergio; Cisbani, Luca; Sforza, Stefano; Cuoghi, Chiara; Basevi, Vittorio

2017-08-01

An efficient breast-feeding monitoring system should be in place in every country to assist policy makers and health professionals plan activities to reach optimal breast-feeding rates. Design/Setting/Subjects From March to June 2015, breast-feeding rates at 3 and 5 months of age were monitored in Emilia-Romagna, an Italian region, using four questions added to a newly developed paediatric immunization database with single records for each individual. Data were collected at primary-care centres. Breast-feeding definitions and 24 h recall as recommended by the WHO were used. Direct age standardization was applied to breast-feeding rates. Record linkage with the medical birth database was attempted to identify maternal, pregnancy and delivery factors associated with full breast-feeding rates at 3 and 5 months of age. Data on breast-feeding were collected for 14044 infants. The mean regional full breast-feeding rate at 3 months was 52 %; differences between local health authorities ranged from 42 to 62 %. At 5 months of age, the mean regional full breast-feeding rate dropped to 33 % (range between local health authorities: 26 to 46 %). Record linkage with the birth certificate database was successful for 93 % of records. Total observations more than doubled with respect to the previous regional survey. The new monitoring system implemented in 2015 in Emilia-Romagna region, totally integrated with the immunization database, has proved to be feasible, sustainable and more efficient than the previous one. This system can be a model for other regions and countries where the vast majority of mothers obtain vaccinations from public health facilities and that already have an immunization database in place.

78 FR 52836 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

...) of America Code 2800, Aircraft Fuel System. (e) Unsafe Condition This AD was prompted by reports of... airplanes of total loss of boost pump pressure of the fuel feed system, followed by loss of fuel system... operational tests of the engine fuel suction feed of the fuel system, and corrective actions if necessary. We...

78 FR 39571 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... 2800, Aircraft Fuel System. (e) Unsafe Condition This AD was prompted by reports of two in-service... system, followed by loss of fuel system suction feed capability on one engine, and in-flight shutdown of... and correct loss of the engine fuel suction feed capability of the fuel system, which, in the event of...

Pressurized feeding on the GEGAS system

NASA Technical Reports Server (NTRS)

Furman, A. H.

1977-01-01

A continuous process to feed coal directly into a pressurized gasifier is described. Coal fines are heated and mixed with a recycled tar binder and extruded through a novel die system against gasifier pressure. Performance data on a 2 in. system is given and scale up to a larger 6 in. system is described.

Feed rate measuring method and system

DOEpatents

Novak, J.L.; Wiczer, J.J.

1995-12-05

A system and method are provided for establishing the feed rate of a workpiece along a feed path with respect to a machine device. First and second sensors each having first and second sensing electrodes which are electrically isolated from the workpiece are positioned above, and in proximity to the desired surfaces of the workpiece along a feed path. An electric field is developed between the first and second sensing electrodes of each sensor and capacitance signals are developed which are indicative of the contour of the workpiece. First and second image signals representative of the contour of the workpiece along the feed path are developed by an image processor. The time delay between corresponding portions of the first and second image signals are then used to determine the feed rate based upon the separation of the first and second sensors and the amount of time between corresponding portions of the first and second image signals. 18 figs.

Feed rate measuring method and system

DOEpatents

Novak, James L.; Wiczer, James J.

1995-01-01

A system and method are provided for establishing the feed rate of a workpiece along a feed path with respect to a machine device. First and second sensors each having first and second sensing electrodes which are electrically isolated from the workpiece are positioned above, and in proximity to the desired surfaces of the workpiece along a feed path. An electric field is developed between the first and second sensing electrodes of each sensor and capacitance signals are developed which are indicative of the contour of the workpiece. First and second image signals representative of the contour of the workpiece along the feed path are developed by an image processor. The time delay between corresponding portions of the first and second image signals are then used to determine the feed rate based upon the separation of the first and second sensors and the amount of time between corresponding portions of the first and second image signals.

WTP Waste Feed Qualification: Glass Fabrication Unit Operation Testing Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, M. E.; Newell, J. D.; Johnson, F. C.

The waste feed qualification program is being developed to protect the Hanford Tank Waste Treatment and Immobilization Plant (WTP) design, safety basis, and technical basis by assuring waste acceptance requirements are met for each staged waste feed campaign prior to transfer from the Tank Operations Contractor to the feed receipt vessels inside the Pretreatment Facility. The Waste Feed Qualification Program Plan describes the three components of waste feed qualification: 1. Demonstrate compliance with the waste acceptance criteria 2. Determine waste processability 3. Test unit operations at laboratory scale. The glass fabrication unit operation is the final step in the processmore » demonstration portion of the waste feed qualification process. This unit operation generally consists of combining each of the waste feed streams (high-level waste (HLW) and low-activity waste (LAW)) with Glass Forming Chemicals (GFCs), fabricating glass coupons, performing chemical composition analysis before and after glass fabrication, measuring hydrogen generation rate either before or after glass former addition, measuring rheological properties before and after glass former addition, and visual observation of the resulting glass coupons. Critical aspects of this unit operation are mixing and sampling of the waste and melter feeds to ensure representative samples are obtained as well as ensuring the fabrication process for the glass coupon is adequate. Testing was performed using a range of simulants (LAW and HLW simulants), and these simulants were mixed with high and low bounding amounts of GFCs to evaluate the mixing, sampling, and glass preparation steps in shielded cells using laboratory techniques. The tests were performed with off-the-shelf equipment at the Savannah River National Laboratory (SRNL) that is similar to equipment used in the SRNL work during qualification of waste feed for the Defense Waste Processing Facility (DWPF) and other waste treatment facilities at the Savannah River Site. It is not expected that the exact equipment used during this testing will be used during the waste feed qualification testing for WTP, but functionally similar equipment will be used such that the techniques demonstrated would be applicable. For example, the mixing apparatus could use any suitable mixer capable of being remoted and achieving similar mixing speeds to those tested.« less

Toxicology study of senna (CAS No. 8013-11-4) in C57BL/6NTAC Mice and toxicology and carcinogenesis study of senna in genetically modified C3B6.129F1/Tac-Trp53tm1Brd haploinsufficient mice (Feed Studies).

PubMed

2012-04-01

Senna is used as a stimulant laxative in the management of constipation resulting from opioid use or when treatment with bulking or osmotic agents has failed. Increased use of senna was expected due to the removal of the stimulant laxatives danthron and phenolphthalein from the market. Senna was nominated for study by the Center for Drug Evaluation and Research, United States Food and Drug Administration (FDA) due to the wide use of laxative preparations, positive genotoxicity in vitro for some senna components or metabolites, and unknown carcinogenic potential. Because a 2-year rat study was ongoing by the manufacturer, the FDA requested that the NTP conduct a senna study in the p53(+/-) mouse. In this study, the potential for carcinogenic effects of senna was studied in the C3B6.129F1/Tac-Trp53tm1Brd N12 haploinsufficient (heterozygous F1 p53(+/-)) mouse model as an ongoing goal of the NTP to develop and test model systems for toxicology and carcinogenesis studies, especially those that can provide mechanistic information relative to understanding an agents mode of action. C57BL/6NTac mice were exposed to senna in feed for 5 weeks; heterozygous F1 p53(+/-) mice were exposed to senna in feed for 40 weeks. Genetic toxicology studies were conducted in Salmonella typhimurium, Escherichia coli, and mouse peripheral blood erythrocytes.

78 FR 10202 - Endangered and Threatened Wildlife and Plants; Receipt of an Application for an Incidental Take...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-13

...-FF04EF2000] Endangered and Threatened Wildlife and Plants; Receipt of an Application for an Incidental Take... acres of foraging, breeding, and sheltering habitat used by the Florida scrub-jay (Aphelocoma..., and gopher tortoise breeding, feeding, and sheltering habitat, incidental to land preparation and...

78 FR 4428 - Endangered and Threatened Wildlife and Plants; Receipt of an Application for an Incidental Take...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

...-FF04EF2000] Endangered and Threatened Wildlife and Plants; Receipt of an Application for an Incidental Take... (Eumeces egregius lividus) (skinks) foraging, breeding, and sheltering habitat incidental to land... and blue-tailed mole skink breeding, feeding, and sheltering habitat incidental to land preparation...

Flooding event impacts soil pH, Ca, and P concentration distribution in a cattle backgrounding site on karst topography.

USDA-ARS?s Scientific Manuscript database

Beef cattle backgrounding in US, function as an intermediate between cow-calf enterprises and feedlot finishing. Beef cattle backgrounding receives weaned calves of different growth stages from cow-calf operations and prepare them ready for feed lot finishing. Many beef cattle backgrounding operati...

40 CFR 63.11621 - What are the standards for new and existing prepared feeds manufacturing facilities?

Code of Federal Regulations, 2012 CFR

2012-07-01

... develop and follow standard operating procedures that ensure proper operation and maintenance of the... manufacturer's specifications are not available, you must develop and follow standard maintenance and operating... 40 Protection of Environment 15 2012-07-01 2012-07-01 false What are the standards for new and...

Adding Economic Analysis to Intelligence Preparation of the Battlefield

DTIC Science & Technology

2008-03-07

in all of our fights around the world; economics. Throughout history, economic factors have been the tinder that feeds the flames of war. Economics... tinder box for the animosity that grew into the Third Reich and the flames of World War II. Learning from our post-WWI economic failure, the Marshall

78 FR 37533 - Notice of Intent To Prepare a Programmatic Environmental Impact Statement for Engineered High...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-21

... contact with food. Analyses from this PEIS would inform these permit applications as well. Examples of... planting, food, and feed use of transgenic plants into which genetic material has been inserted that imparts pesticidal properties. The Food and Drug Administration, under the Federal Food, Drug, and...

Hydrogen generation through static-feed water electrolysis

NASA Technical Reports Server (NTRS)

Jensen, F. C.; Schubert, F. H.

1975-01-01

A static-feed water electrolysis system (SFWES), developed under NASA sponsorship, is presented for potential applicability to terrestrial hydrogen production. The SFWES concept uses (1) an alkaline electrolyte to minimize power requirements and materials-compatibility problems, (2) a method where the electrolyte is retained in a thin porous matrix eliminating bulk electrolyte, and (3) a static water-feed mechanism to prevent electrode and electrolyte contamination and to promote system simplicity.

Complementary Feeding: Review of Recommendations, Feeding Practices, and Adequacy of Homemade Complementary Food Preparations in Developing Countries – Lessons from Ethiopia

PubMed Central

Abeshu, Motuma Adimasu; Lelisa, Azeb; Geleta, Bekesho

2016-01-01

Breastfeeding provides the ideal food during the first 6 months of life. Complementary feeding starts when breast milk is no longer sufficient by itself, where the target age is for 6–23 months. The gap between nutritional requirement and amount obtained from breast milk increases with age. For energy, 200, 300, and 550 kcal per day is expected to be covered by complementary foods at 6–8, 9–11, and 12–23 months, respectively. In addition, the complementary foods must provide relatively large proportions of micronutrients such as iron, zinc, phosphorus, magnesium, calcium, and vitamin B6. In several parts of the developing world, complementary feeding continues as a challenge to good nutrition in children. In Ethiopia, only 4.2% of breastfed children of 6–23 months of age have a minimum acceptable diet. The gaps are mostly attributed to either poor dietary quality or poor feeding practices, if not both. Commercial fortified foods are often beyond the reach of the poor. Thus, homemade complementary foods remain commonly used. Even when based on an improved recipe, however, unfortified plant-based complementary foods provide insufficient key micronutrients (especially, iron, zinc, and calcium) during the age of 6–23 months. Thus, this review assessed complementary feeding practice and recommendation and reviewed the level of adequacy of homemade complementary foods. PMID:27800479

Exploration of reasons for feeding choices in Hispanic mothers.

PubMed

Waldrop, Julee

2013-01-01

To explore factors that contribute to feeding choices Hispanic women make for their newborn infants in the immediate postpartum period, with a focus on the phenomenon of "los dos," breastfeeding with formula supplementation. A descriptive qualitative design that utilized a semistructured interview guide with open-ended questions was used. Qualitative data preparation and analysis methods were used to identify themes surrounding feeding choices. The sample included 19 women within 48 hours of giving birth who self-identified as Spanish speakers. Reasons included 1) previous experience; 2) "no llora con hambre" (no crying for hunger); 3) "para salud" (for health); and 4) to prevent suffering that might occur when the mother and infant were separated while the mother worked "no quiero que sufra mientras trabajo." Discussion of infant feeding choices should occur prior to birth since many mothers decide on feeding method while still pregnant. At the first prenatal visit identification of preference should occur to include not just breast or formula, but also asking about "los dos." Educational interventions that directly address the "los dos" feeding practice should be culturally appropriate, evaluated and disseminated for use in the prenatal period. Influential family members should be included in prenatal visits and educational sessions to help assure that the woman is not receiving mixed messages at home. Assessment of the workplace environment should also occur during the prenatal period with an exploration of how pumping and storing of breast milk might be possible once women return to work after the baby's birth.

Complementary feeding of infants in their first year of life: focus on the main pureed baby foods.

PubMed

Souza, Fabíola Isabel Suano de; Caetano, Michelle Cavalcante; Ortiz, Thaís Tobaruela; Silva, Simone Guerra Lopes da; Sarni, Roseli Oselka Saccardo

2014-01-01

To evaluate the complementary feeding practices for infants, focusing on the main pureed baby foods, and verify adherence to the guidelines adopted in Brazil. Through cross-sectional study, aspects of complementary feeding of 404 healthy infants between 4 and 9 months of age (São Paulo, Curitiba and Recife) were evaluated. Socio-demographic data, history and food habits were collected. Mothers described three recipes (preparations) usually used in key baby foods. The findings were compared with those recommended by the Brazilian Society of Pediatrics. The average age was 6.9 ± 1.6 months. Among infants, 241/404 (59.6%) were still breastfeeding. Among those who received another type of milk, 193/368 (52.4%) received whole cow's milk, while 151/368 (41.0%) drank infant or follow-on formulas. Regarding baby food recipes salted reported by mothers, it was seen that 30% and 60% contained meat and vegetables, respectively. The percentages less suitable for feeding in general were observed for use of cow's milk and added sugar, chocolate and cereal in feeding bottles; 79% and 80.5% of the families interviewed would adopted such practices. The early termination of exclusive/predominant breastfeeding and the practice of an inadequate transition diet have shown a picture of quantitatively and qualitatively inadequate feeding, with the risk of causing serious nutritional problems in later ages, such as anemia and vitamin A deficiency, or excess of nutrients, leading to obesity, diabetes and dyslipidemias.

History of the magmatic feeding system of the Campi Flegrei caldera (Italy)

NASA Astrophysics Data System (ADS)

Civetta, L.; Arienzo, I.; D'Antonio, M.; di Renzo, V.; di Vito, M. A.; Orsi, G.

2007-05-01

The definition of the magmatic feeding system of active volcanoes in terms of architecture, composition, crystallization time-scale, relationships between composition of the erupted magmas and structural position of the vents, and magma processes, is of paramount importance for volcanic hazards evaluation. Investigations aimed at defining the Campi Flegeri magmatic system, include detailed mineralogical, geochemical and isotopic analyses (Sr, Nd, Pb, Th,U). The magmatic feeding system of the Campi Flegrei caldera is characterized by deep and shallow magma reservoirs. In the deep reservoirs (20-10 km depth) mantle- derived magmas differentiated and were contaminated by continental crust. In the shallow reservoirs isotopically distinct magmas, further differentiated, contaminated, and mixed and mingled before eruptions. These processes generated isotopically distinct components, variably interacting with the different structural elements of the Campi Flegrei caldera through time. The relationships between the structural position of the eruption vents, during the last 15 ka of activity, and the isotopic composition of the magmas erupted at the Campi Flegrei caldera allow us to reconstruct the architecture of the magmatic feeding system and to infer the chemical and isotopic composition of the magma feeding a future eruption, according to vent position.

Simultaneous measurement of sleep and feeding in individual Drosophila

PubMed Central

Murphy, Keith R.; Park, Jin Hong; Huber, Robert; Ja, William W.

2018-01-01

Drosophila is widely used for the dissection of genetic and neuronal mechanisms of behavior. Recently, flies have emerged as a model for investigating the regulation of feeding and sleep. Although typically studied in isolation, increasing evidence points to a fundamental connection between these behaviors. Thus, a system for measuring sleep and feeding simultaneously in a single integrated system is important for interpreting behavioral shifts of either state. Here, we describe the construction and use of the Activity Recording CAFE (ARC), a machine-vision based system for the integrated measurement of sleep and feeding in individual Drosophila. Flies feed on liquid food in a microcapillary and consumption is measured by automated tracking of the liquid meniscus over time. Sleep measurements are obtained from positional tracking of the animals and arousal threshold can be determined by vibrational stimulus response. Using this system, a single computer and experimenter can track diverse behaviors from up to 60 individual flies in a single integrated system. The ARC is efficiently assembled with minimal training and each experiment can be run for up to ~7 days, with a total setup and breakdown time of about 2 hours. PMID:29022943

The role of orexin-A in food motivation, reward-based feeding behavior and food-induced neuronal activation in rats.

PubMed

Choi, D L; Davis, J F; Fitzgerald, M E; Benoit, S C

2010-04-28

Consumption beyond homeostatic needs, referred to here as reward-based feeding behavior, is a central contributor to the current obesity epidemic worldwide. Importantly, reward-based feeding can be driven by palatability, the taste and texture of the food, as well as cues associated with the consumption of palatable foods. The hypothalamic orexin system regulates both diet preference and anticipation of food rewards making it a likely target to modulate reward-based feeding behavior. In the current manuscript we hypothesized that orexin signaling mediates food-motivated behaviors and reward-based feeding behavior. We further hypothesized that orexin neurons and targets of the orexin system become activated in response to cues associated with the consumption of palatable food. Data from these studies suggest that orexin signaling promotes progressive ratio responding for palatable foods while blockade of orexin signaling attenuates reward-based feeding of a high fat diet. In addition, cues linked to the consumption of chocolate, or the receipt of a daily meal, activate the orexin system and its target regions differentially. Collectively, these data suggest that orexin signaling mediates reward-based feeding behavior and, within specific target regions, may regulate cue-induced overconsumption of palatable foods. Copyright 2010 IBRO. Published by Elsevier Ltd. All rights reserved.

A Novel Approach to Improving Fat Delivery in Neonatal Enteral Feeding

PubMed Central

Jarjour, Jane; Juarez, Alexa M.; Kocak, Denizen K.; Liu, Nathan J.; Tabata, Mika M.; Hawthorne, Keli M.; Ramos, Renata F.; Abrams, Steven A.

2015-01-01

Continuous infusion systems used for enteral nutrition support in the neonatal intensive care unit deliver as little as 60% of the fat in human milk to the neonate. This study determined the effect of mixing common feedings for preterm infants in the feeding bag and tubing on fat losses during enteral feeding. Laboratory models were developed to assess the contribution of various mixing techniques to delivered fat content. Fat content was measured periodically during feeding and compared to baseline measurements. A multistage approach incorporating a feeding bag inverter and a tubing circulation loop delivered >90% of milk fat when used in conjunction with a commercial continuous infusion system. With unfortified human milk, this approach delivered 91.9% ± 1.5% of fat content over a one hour feed, significantly greater (p < 0.01) than 77.5% ± 2.2% delivered by continuous infusion controls (Mean ± SEM). With fortified human milk, this approach delivered 92.1% ± 2.4% of fat content, significantly greater (p < 0.01) than 79.4% ± 1.0% delivered by a non-adapted infusion system (Mean ± SEM). Mixing human milk during continuous infusion improves fat delivery, which may improve nutrition and growth outcomes in low birth weight neonates. PMID:26110253

75 FR 19950 - Notice of Commission Meeting and Public Hearing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... unit and a chemical feed system. The project includes the transfer of ownership from North Wales... post-aeration tank, a screw press for sludge dewatering, chemical feed systems and a filtration..., Pennsylvania. 15. Naval Surface Warfare Center, Carderock Division, Ship Systems Engineering Station, D-2009...

Continuous direct tablet compression: effects of impeller rotation rate, total feed rate and drug content on the tablet properties and drug release.

PubMed

Järvinen, Maiju A; Paaso, Janne; Paavola, Marko; Leiviskä, Kauko; Juuti, Mikko; Muzzio, Fernando; Järvinen, Kristiina

2013-11-01

Continuous processing is becoming popular in the pharmaceutical industry for its cost and quality advantages. This study evaluated the mechanical properties, uniformity of dosage units and drug release from the tablets prepared by continuous direct compression process. The tablet formulations consisted of acetaminophen (3-30% (w/w)) pre-blended with 0.25% (w/w) colloidal silicon dioxide, microcrystalline cellulose (69-96% (w/w)) and magnesium stearate (1% (w/w)). The continuous tableting line consisted of three loss-in-weight feeders and a convective continuous mixer and a rotary tablet press. The process continued for 8 min and steady state was reached within 5 min. The effects of acetaminophen content, impeller rotation rate (39-254 rpm) and total feed rate (15 and 20 kg/h) on tablet properties were examined. All the tablets complied with the friability requirements of European Pharmacopoeia and rapidly released acetaminophen. However, the relative standard deviation of acetaminophen content (10% (w/w)) increased with an increase in impeller rotation rate at a constant total feed rate (20 kg/h). A compression force of 12 kN tended to result in greater tablet hardness and subsequently a slower initial acetaminophen release from tablets when compared with those made with the compression force of about 8 kN. In conclusion, tablets could be successfully prepared by a continuous direct compression process and process conditions affected to some extent tablet properties.

Preparation of Microcrystals of Piroxicam Monohydrate by Antisolvent Precipitation via Microfabricated Metallic Membranes with Ordered Pore Arrays.

PubMed

Othman, Rahimah; Vladisavljević, Goran T; Simone, Elena; Nagy, Zoltan K; Holdich, Richard G

2017-12-06

Microcrystals of piroxicam (PRX) monohydrate with a narrow size distribution were prepared from acetone/PRX solutions by antisolvent crystallization via metallic membranes with ordered pore arrays. Crystallization was achieved by controlled addition of the feed solution through the membrane pores into a well-stirred antisolvent. A complete transformation of an anhydrous form I into a monohydrate form of PRX was confirmed by Raman spectroscopy and differential scanning calorimetry. The size of the crystals was 7-34 μm and was controlled by the PRX concentration in the feed solution (15-25 g L -1 ), antisolvent/solvent volume ratio (5-30), and type of antisolvent (Milli-Q water or 0.1-0.5 wt % aqueous solutions of hydroxypropyl methyl cellulose (HPMC), poly(vinyl alcohol) or Pluronic P-123). The smallest crystals were obtained by injecting 25 g L -1 PRX solution through a stainless-steel membrane with a pore size of 10 μm into a 0.06 wt % HPMC solution stirred at 1500 rpm using an antisolvent/solvent ratio of 20. HPMC provided better steric stabilization of microcrystals against agglomeration than poly(vinyl alcohol) and Pluronic P-123, due to hydrogen bonding interactions with PRX and water. A continuous production of large PRX monohydrate microcrystals with a volume-weighted mean diameter above 75 μm was achieved in a continuous stirred membrane crystallizer. Rapid pouring of Milli-Q water into the feed solution resulted in a mixture of highly polydispersed prism-shaped and needle-shaped crystals.

Auditory contributions to flavour perception and feeding behaviour.

PubMed

Spence, Charles

2012-11-05

This article reviews the research that has looked at the role of audition in both flavour perception and feeding behaviour in humans. The article starts by looking at early research that focused on the effect of background noise on the sensory-discriminative aspects of taste/flavour perception and on people's hedonic responses to food and beverage items. Next, I move on to look at the role of the sound made by the food (or beverage) itself. Additionally, recent studies that have started to assess the impact of food and beverage packaging sounds, not to mention food preparation sounds, on people's sensory-discriminative and hedonic responses to a variety of food and beverage products are discussed. Finally, the literature on the effect of background music and/or soundscapes on food and beverage perception/consumption are reviewed briefly. Taken together, this body of research, spanning both highly-controlled laboratory experiments and more ecologically-valid field studies, clearly demonstrates that what the consumer hears, be it the sound of the food, the sound of the packaging, the sound of the machine used to prepare that food or beverage (e.g., as in the case of the sound of a coffee machine), and even the sound of the environment in which the consumer happens to be eating and drinking can all exert a profound, if often unacknowledged, role in our feeding behaviours not to mention on our flavour perception. Copyright © 2012 Elsevier Inc. All rights reserved.

DEVELOPMENT OF PLUTONIUM-BEARING FUEL MATERIALS. Progress Report, October 1-December 31, 1961

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1962-10-31

Continued effort is reported on preparation and characterization of PuO/ sub 2/ and UO/sub 2/-- PuO/sub 2/ mixtures. Sintering and characterization of pellets for irradiation tests was emphasized, and efforts were also devoted to plasma torch production of spherical PuO /sub 2/ and coating of oxide materials. PuO/sub 2/ produced by the oxalate process from low concentration feed contains agglomerates which are not readily broken down, while that produced from normal feed contains larger agglomerates which are easily dispersed ultrasonically, and are more easily calcined. The water filtration method for determining total porosity of powders was adapted for use withmore » PuO/sub 2/. Moisture pickup studies show that the problems encountered with PuO/sub 2/ are similar to those found in handling ceramic-grade UO/. Reproducibility tests carried out on UO/sub 2/--PuO/ sub 2/ mixtures indicate that production methods are satisfactory. Lab-scale experiments on production of PuO/sub 2/-- UO/sub 2/feed for the plasma torch indicate that further work is worthwhile. Adaptation of a potentiometric filtration for Pu is reported. A twophase microstructure found in PuO/ after sintering in N6% H atmosphere was identified as PuO/sub 2/ and cubic Pu/sub 2/O/ sub 3/. Spherical particles were produced in the plasma torch using crushed or preformed high-fired particles. Spherical particles of PuO/sub 2/ were also produced by a multi-step process of drying, pressing, granulation, sizing, shaping, and sintering. Reactor physics studies were continued to determine the effect of cross section assumptions on the calculated behavior of Pu-fueled near- thermal reactor systems. It was concluded that relatively long core life (reactivity limiting) is attainable with these systems. (J.R.D.)« less

Thermal Integration of a Liquid Acquisition Device into a Cryogenic Feed System

NASA Technical Reports Server (NTRS)

Hastings, L. J.; Bolshinskiy, L. G.; Schunk, R. G.; Martin, A. K.; Eskridge, R. H.; Frenkel, A.; Grayson, G.; Pendleton, M. L.

2011-01-01

Primary objectives of this effort were to define the following: (1) Approaches for quantification of the accumulation of thermal energy within a capillary screen liquid acquisition device (LAD) for a lunar lander upper stage during periods of up to 210 days on the lunar surface, (2) techniques for mitigating heat entrapment, and (3) perform initial testing, data evaluation. The technical effort was divided into the following categories: (1) Detailed thermal modeling of the LAD/feed system interactions using both COMSOL computational fluid device and standard codes, (2) FLOW-3D modeling of bulk liquid to provide interfacing conditions for the LAD thermal modeling, (3) condensation conditioning of capillary screens to stabilize surface tension retention capability, and (4) subscale testing of an integrated LAD/feed system. Substantial progress was achieved in the following technical areas: (1) Thermal modeling and experimental approaches for evaluating integrated cryogen LAD/feed systems, at both the system and component levels, (2) reduced gravity pressure control analyses, (3) analytical modeling and testing for capillary screen conditioning using condensation and wicking, and (4) development of rapid turnaround testing techniques for evaluating LAD/feed system thermal and fluid integration. A comprehensive effort, participants included a diverse cross section of representatives from academia, contractors, and multiple Marshall Space Flight Center organizations.

Occupational IgE sensitisation to phytase, a phosphatase derived from Aspergillus niger.

PubMed

Doekes, G; Kamminga, N; Helwegen, L; Heederik, D

1999-07-01

Phytase is a phosphatase derived from Aspergillus niger that enhances phosphate bioavailability in the gut, and therefore has been increasingly used as an animal feed additive since the early 1990s. The aim of this study was to assess whether work related respiratory symptoms among workers in a so called premix factory producing animal feed additives, could be due to type I (mediated by immunoglobulin E (IgE) allergic sensitisation to phytase. Preparations of specific IgE against phytase as used in the factory were assessed by enzyme immunoassay (EIA) in serum samples of 11 exposed workers who regularly handled the enzyme, in 11 office and laboratory workers of the same plant (non-exposed internal controls), and in 19 laboratory animal workers as external controls. The factory workers also completed a questionnaire on common and work related respiratory symptoms. Depending on the cut off level in the EIA for IgE, and the preparation used as coated allergen, antiphytase sensitisation was found in one to four of the 19 external controls, in one to five of the 11 internal controls, and in four to 10 of the 11 exposed workers. Strongest IgE reactions were found in four exposed workers who reported work related respiratory symptoms, particularly wheezing, and in one internal control who possibly had become sensitised because the structure of the factory building did not preclude airborne exposure in the offices and corridors of the plant. Experiments with inhibition EIA for IgE showed that (a) phytase of another commercial source was only partially cross reactive with phytase as used in the premix factory, and (b) phytase used as an animal feed additive did not cross react with common mould extracts, except for extracts from the species of origin, Aspergillus niger. The amount of IgE binding phytase in Aspergillus niger was estimated to be between 0.1% and 1% of the extractable mould proteins. Phytase is a potentially important new occupational allergen causing specific IgE immune responses among exposed workers. Such IgE sensitisation could probably be the cause of work related asthmatic and other respiratory symptoms if no effective measures are taken to prevent airborne occupational exposure at sites where phytase is handled, particularly during addition of enzyme preparations to animal feed.

High-Temperature Hot Air/Silane Coupling Modification of Wood Fiber and Its Effect on Properties of Wood Fiber/HDPE Composites.

PubMed

Chen, Feng; Han, Guangping; Li, Qingde; Gao, Xun; Cheng, Wanli

2017-03-13

The surfaces of poplar wood fibers were modified using high-temperature hot air (HTHA) treatment and silane coupling agent. The single factor test was then used to investigate the performances (e.g., the change of functional groups, polarity, cellulose crystallinity, and thermal stability) of modified poplar wood fibers (mPWF) through Fourier transform infrared spectrometry, X-ray diffraction and thermo-gravimetric analysis for the subsequent preparation of wood-plastic composites (WPCs). The effect of HTHA treatment conditions-such as temperature, inlet air velocity, and feed rate-on the performances of WPCs was also investigated by scanning electron microscopy and dynamic mechanical analysis. The main findings indicated that HTHA treatment could promote the hydration of mPWF and improve the mechanical properties of WPCs. Treatment temperature strongly affected the mechanical properties and moisture adsorption characteristics of the prepared composites. With the increase of treated temperature and feed rate, the number of hydroxyl groups, holocellulose content, and the pH of mPWF decreased. The degree of crystallinity and thermal stability and the storage modulus of the prepared composites of mPWF increased. However, dimensional stability and water absorption of WPCs significantly reduced. The best mechanical properties enhancement was observed with treatment temperature at 220 °C. This study demonstrated the feasibility for the application of an HTHA treatment in the WPC production industry.

High-Temperature Hot Air/Silane Coupling Modification of Wood Fiber and Its Effect on Properties of Wood Fiber/HDPE Composites

PubMed Central

Chen, Feng; Han, Guangping; Li, Qingde; Gao, Xun; Cheng, Wanli

2017-01-01

The surfaces of poplar wood fibers were modified using high-temperature hot air (HTHA) treatment and silane coupling agent. The single factor test was then used to investigate the performances (e.g., the change of functional groups, polarity, cellulose crystallinity, and thermal stability) of modified poplar wood fibers (mPWF) through Fourier transform infrared spectrometry, X-ray diffraction and thermo-gravimetric analysis for the subsequent preparation of wood-plastic composites (WPCs). The effect of HTHA treatment conditions—such as temperature, inlet air velocity, and feed rate—on the performances of WPCs was also investigated by scanning electron microscopy and dynamic mechanical analysis. The main findings indicated that HTHA treatment could promote the hydration of mPWF and improve the mechanical properties of WPCs. Treatment temperature strongly affected the mechanical properties and moisture adsorption characteristics of the prepared composites. With the increase of treated temperature and feed rate, the number of hydroxyl groups, holocellulose content, and the pH of mPWF decreased. The degree of crystallinity and thermal stability and the storage modulus of the prepared composites of mPWF increased. However, dimensional stability and water absorption of WPCs significantly reduced. The best mechanical properties enhancement was observed with treatment temperature at 220 °C. This study demonstrated the feasibility for the application of an HTHA treatment in the WPC production industry. PMID:28772646

Robotic milking: Feeding strategies and economic returns.

PubMed

Bach, Alex; Cabrera, Victor

2017-09-01

Cows in herds equipped with conventional milking parlors follow a structured, consistent, and social milking and feeding routine. Furthermore, in most cases cows in conventional herds receive all their nutrients from a total mixed ration, whereas in herds equipped with robotic or automatic milking systems (AMS) a fraction of their nutrients is provided during milking, mainly as a means to attract cows to the milking system. In this regards, AMS present both a challenge and an opportunity for feeding cows. The main challenge resides in maintaining a minimum and relatively constant milking frequency in AMS. However, milking frequency is dependent on many factors, including the social structure of the herd, the farm layout design, the type of traffic imposed to cows, the type of flooring, the health status of the cow (especially lameness, but also mastitis, metritis, among others), the stage of lactation, the parity, and the type of ration fed at the feed bunk and the concentrate offered in the AMS. Uneven milk frequency has been associated with milk losses and increased risk of mastitis, but most importantly it is a lost opportunity for milking the cow and generating profit. On the other hand, the opportunity from AMS resides in the possibility of milking more frequently and feeding cows more precisely or more closely to their nutrient needs on an individual basis, potentially resulting in a more profitable production system. But, feeding cows in the parlor or AMS has many challenges. On one side, feeding starchy, highly palatable ingredients in large amounts may upset rumen fermentation or alter feeding behavior after milking, whereas feeding high-fiber concentrates may compromise total energy intake and limit milking performance. Nevertheless, AMS (and some milking parlors, especially rotary ones) offer the possibility of feeding the cows to their estimated individual nutrient needs by combining different feeds on real time with the aim of maximizing profits rather than milk yield. This approach requires that not only the amount of feed offered to each cow but also the composition of the feed vary according to the different nutrient needs of the cows. This review discusses the opportunities and pitfalls of milking and feeding cows in an AMS and summarizes different feeding strategies to maximize profits by managing the nutrition of the cows individually. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The relationship between different measures of feed efficiency and feeding behavior traits in Duroc pigs.

PubMed

Lu, D; Jiao, S; Tiezzi, F; Knauer, M; Huang, Y; Gray, K A; Maltecca, C

2017-08-01

Utilization of feed in livestock species consists of a wide range of biological processes, and therefore, its efficiency can be expressed in various ways, including direct measurement, such as daily feed intake, as well as indicator measures, such as feeding behavior. Measuring feed efficiency is important to the swine industry, and its accuracy can be enhanced by using automated feeding systems, which record feed intake and associated feeding behavior of individual animals. Each automated feeder space is often shared among several pigs and therefore raises concerns about social interactions among pen mates with regard to feeding behavior. The study herein used a data set of 14,901 Duroc boars with individual records on feed intake, feeding behavior, and other off-test traits. These traits were modeled with and without the random spatial effect of Pen_Room, a concatenation of room and pen, or random social interaction among pen mates. The nonheritable spatial effect of common Pen-Room was observed for traits directly measuring feed intake and accounted for up to 13% of the total phenotypic variance in the average daily feeding rate. The social interaction effect explained larger proportions of phenotypic variation in all the traits studied, with the highest being 59% for ADFI in the group of feeding behaviors, 73% for residual feed intake (RFI; RFI4 and RFI6) in the feed efficiency traits, and 69% for intramuscular fat percentage in the off-test traits. After accounting for the social interaction effect, residual BW gain and RFI and BW gain (RIG) were found to have the heritability of 0.38 and 0.18, respectively, and had strong genetic correlations with growth and off-test traits. Feeding behavior traits were found to be moderately heritable, ranging from 0.14 (ADFI) to 0.52 (average daily occupation time), and some of them were strongly correlated with feed efficiency measures; for example, there was a genetic correlation of 0.88 between ADFI and RFI6. Our work suggested that accounting for the social common pen effect was important for estimating genetic parameters of traits recorded by the automated feeding system. Residual BW gain and RIG appeared to be two robust measures of feed efficiency. Feeding behavior measures are worth further investigation as indicators of feed efficiency.

Mitogenomes of Giant-Skipper Butterflies reveal an ancient split between deep and shallow root feeders.

PubMed

Zhang, Jing; Cong, Qian; Fan, Xiao-Ling; Wang, Rongjiang; Wang, Min; Grishin, Nick V

2017-01-01

Background: Giant-Skipper butterflies from the genus Megathymus are North American endemics. These large and thick-bodied Skippers resemble moths and are unique in their life cycles. Grub-like at the later stages of development, caterpillars of these species feed and live inside yucca roots. Adults do not feed and are mostly local, not straying far from the patches of yucca plants. Methods: Pieces of muscle were dissected from the thorax of specimens and genomic DNA was extracted (also from the abdomen of a specimen collected nearly 60 years ago). Paired-end libraries were prepared and sequenced for 150bp from both ends. The mitogenomes were assembled from the reads followed by a manual gap-closing procedure and a phylogenetic tree was constructed using a maximum likelihood method from an alignment of the mitogenomes. Results: We determined mitogenome sequences of nominal subspecies of all five known species of Megathymus and Agathymus mariae to confidently root the phylogenetic tree. Pairwise sequence identity indicates the high similarity, ranging from 88-96% among coding regions for 13 proteins, 22 tRNAs and 2 rRNA, with a gene order typical for mitogenomes of Lepidoptera. Phylogenetic analysis confirms that Giant-Skippers (Megathymini) originate within the subfamily Hesperiinae and do not warrant a subfamily rank. Genus Megathymus is monophyletic and splits into two species groups. M. streckeri and M. cofaqui caterpillars feed deep in the main root system of yucca plants and deposit frass underground. M. ursus , M. beulahae and M. yuccae feed in the yucca caudex and roots near the ground, and deposit frass outside through a "tent" (a silk tube projecting from the center of yucca plant). M. yuccae and M. beulahae are sister species consistently with morphological similarities between them. Conclusions: We constructed the first DNA-based phylogeny of the genus Megathymus from their mitogenomes. The phylogeny agrees with morphological considerations.

Effect of sequencing of complementary feeding in relation to breast-feeding on total intake in infants.

PubMed

Shah, Dheeraj; Singh, Meenakshi; Gupta, Piyush; Faridi, M M A

2014-03-01

The aim of the present study was to evaluate whether the order of complementary feeding in relation to breast-feeding affects breast milk, semisolid, or total energy intake in infants. The present study was designed as a randomized crossover trial. The study was conducted in a tertiary care hospital. The study participants were 25 healthy infants between the ages of 7 and 11 months who were exclusively breast-fed for at least 6 months and were now receiving complementary foods for at least 1 month in addition to breast-feeding. Infants were randomized to follow a sequence of either complementary feeding before breast-feeding (sequence A) or complementary feeding after breast-feeding (sequence B) for the first day (24 hours) of the study period using simple randomization. For the next day, the sequence was reversed for each child. All babies received 3 actively fed complementary food meals per day (morning, afternoon, and evening). A semisolid study diet was prepared in the hospital by cooking rice and pulse with oil using a standard method, ensuring the energy density of at least 0.6 kcal/g. The infants were allowed ad libitum breast-feeding during the observation period. Semisolid intake was directly measured and breast milk intake was quantified by test weighing method. Energy intake from complementary foods was calculated from the product of energy density of the diet served on that day and the total amount consumed. The total energy intake and energy intake from breast milk and complementary foods between the 2 sequences were compared. The mean (standard deviation) energy intake from breast milk during 12 hours of daytime by following sequence A (complementary feeding before breast-feeding) was 132.0 (67.4) kcal in comparison with 135.9 (56.2) kcal in sequence B, which was not statistically different (P = 0.83). The mean (standard deviation) energy consumed from semisolids in sequences A and B was also comparable (88.6 [75.5] kcal vs. 85.5 [89.7] kcal; P = 0.58). The total energy intake during daytime in sequence A was 220.6 (96.2) kcal in comparison with 221.5 (94.0) kcal in sequence B, which was also comparable (P = 0.97). The results related to energy intake through breast milk and total energy intake were not different when insensible losses during feeding were adjusted in both groups. Altering the sequence of complementary feeding in relation to breast-feeding does not affect total energy intake.

A novel delivery system of doxorubicin with high load and pH-responsive release from the nanoparticles of poly (α,β-aspartic acid) derivative.

PubMed

Wang, Xiaojuan; Wu, Guolin; Lu, Caicai; Zhao, Weipeng; Wang, Yinong; Fan, Yunge; Gao, Hui; Ma, Jianbiao

2012-08-30

A poly (amino acid)-based amphiphilic copolymer was utilized to fabricate a better micellar drug delivery system (DDS) with improved compatibility and sustained release of doxorubicin (DOX). First, poly (ethylene glycol) monomethyl ether (mPEG) and DOX were conjugated onto polyasparihyazide (PAHy), prepared by hydrazinolysis of the poly (succinimide) (PSI), to afford an amphiphilic polymer [PEG-hyd-P (AHy-hyd-DOX)] with acid-liable hydrazone bonds. The DOX, chemically conjugated to the PAHy, was designed to supply hydrophobic segments. PEGs were also grafted to the polymer via hydrazone bonds to supply hydrophiphilic segments and prolong its lifetime in blood circulation. Free DOX molecules could be entrapped into the nanoparticles fabricated by such an amphiphilic polymer (PEG-hyd-P (AHy-hyd-DOX)), via hydrophobic interaction and π-π stacking between the conjugated and free DOX molecules to obtain a pH responsive drug delivery system with high DOX loaded. The drug loading capacity, drug release behavior, and morphology of the micelles were investigated. The biological activity of micelles was evaluated in vitro. The drug loading capacity was intensively augmented by adjusting the feed ratio, and the maximum loading capacity was as high as 38%. Besides, the DOX-loaded system exhibited pH-dependent drug release profiles in vitro. The cumulative release of DOX was much faster at pH 5.0 than that at pH 7.4. The DOX-loaded system kept highly antitumor activity for a long time, compared with free DOX. This easy-prepared DDS, with features of biocompatibility, biodegradability, high drug loading capacity and pH-responsiveness, was a promising controlled release delivery system for DOX. Copyright © 2012 Elsevier B.V. All rights reserved.

Space fabrication demonstration system. [beam builder and induction fastening

NASA Technical Reports Server (NTRS)

1980-01-01

The development effort on the composite beam cap fabricator was completed within cost and close to abbreviated goals. The design and analysis of flight weight primary and secondary beam builder structures proceeded satisfactorily but remains curtailed until further funding is made available to complete the work. The induction fastening effort remains within cost and schedule constraints. Tests of the LARC prototype induction welder is continuing in an instrumented test stand comprised of a Dumore drill press (air over oil feed for variable applied loads) and a dynamometer to measure actual welding loads. Continued testing shows that the interface screening must be well impregnated with resin to ensure proper flow when bonding graphite-acrylic lap shear samples. Specimens prepared from 0.030 inch thick graphite-polyethersulfone are also available for future induction fastening evaluation.

Preparation and physicochemical characterization of matrix pellets containing APIs with different solubility via extrusion process.

PubMed

Hegyesi, Diána; Thommes, Markus; Kleinebudde, Peter; Sovány, Tamás; Kása, Péter; Kelemen, András; Pintye-Hódi, Klára; Regdon, Géza

2017-03-01

In this study, a multiparticulate matrix system was produced, containing two different active pharmaceutical ingredients (APIs): enalapril-maleate and hydrochlorothiazide. The critical control points of the process were investigated by means of factorial design. Beside the generally used microcrystalline cellulose, ethylcellulose was used as matrix former to achieve modified drug release ensured by diffusion. The matrix pellets were made by extrusion-spheronization using a twin-screw extruder. Some pellet properties (aspect ratio, 10% interval fraction, hardness, deformation process) were determined. The aim of our study was to investigate how the two different APIs with different solubility and particle size influence the process. The amount of the granulation liquid plays a key role in the pellet shaping. A higher liquid feed rate is preferred in the pelletization process.

Dual frequency feed system for the CTS communications link characterization experiment

NASA Technical Reports Server (NTRS)

Gill, G. J.

1976-01-01

The developing, testing and installation of a dual frequency feed assembly were described. The feed has been designed to receive signals in the frequency range 11.7 to 12.2 GHz and transmit signals in the frequency range 14.12 GHz plus or minus 250 MHz. Complete performance data of the feed alone and installed in the 15 foot antenna is included herein. Drawings and descriptive information of the feed assembly are also given.

Environmental indicators in effluent assessment of rainbow trout (Oncorhynchus mykiss) reared in raceway system through phosphorus and nitrogen.

PubMed

Moraes, M A B; Carmo, C F; Tabata, Y A; Vaz-Dos-Santos, A M; Mercante, C T J

2016-01-01

The phosphorus and nitrogen discharge via effluent of intensive trout farming system was quantified through the use of environmental indicators. The nutrient loads, the mass balance, the estimated amount of nutrients in feed and the amount of nutrients converted in fish biomass were calculated based on the concentrations of phosphorus (P) and nitrogen (N) in the feed and in the water. Of the offered feed, 24.75 kg were available as P and 99.00 kg as N, of these, 9.32 kg P (38%) and 29.12 kg N (25%) were converted into fish biomass and 15.43 kg P (62%) and 69.88 kg N (75%) were exported via effluent. The loads and the mass balance show the excessive discharge of nutrients via effluent, corroborated by the feed conversion ratio (2.12:1) due to the low efficiency of feed utilization, therefore, it is proposed the use of this zootechnical parameter as environmental indicator. In addition, feed management practices are not adequate, highlighting the low frequency of feeding during the day, excessive amount and low quality of feed offered. These results demonstrate the need for adequate feed management and the need for careful monitoring of effluent.

System Thinking and Feeding Relations: Learning with a Live Ecosystem Model

ERIC Educational Resources Information Center

Eilam, Billie

2012-01-01

Considering well-documented difficulties in mastering ecology concepts and system thinking, the aim of the study was to examine 9th graders' understanding of the complex, multilevel, systemic construct of feeding relations, nested within a larger system of a live model. Fifty students interacted with the model and manipulated a variable within it…

Unconventional diets for dogs and cats.

PubMed

Michel, Kathryn E

2006-11-01

Food plays a far more complex role in daily life than simply serving as sustenance. Social and cultural factors along with individual beliefs govern people's eating behaviors, and it is likely that these same factors influence their choice of diet and feeding practices for their pets. Some people seek alternatives to conventional commercial pet foods, including commercially available "natural" diets, raw food diets, and vegetarian diets, in addition to a variety of home-prepared diets. Exploring a person's knowledge and beliefs about feeding pets can aid in understanding her or his motives for seeking alternative and may help in changing those practices when it is in the best interest of the pet to do so.

A simple control for sediment-toxicity exposures using the amphipod, Hyalella azteca

USGS Publications Warehouse

Lasier, Peter J.; Urich, Matthew L.

2014-01-01

Sediment-toxicity exposures comparing survival and growth of the freshwater amphipod, Hyalella azteca, are often components of aquatic-habitat assessments. Standardized exposure methods have been established and require evaluations for quality assurance. Test acceptability using performance-based criteria can be determined from exposures to control sediments, which are collected from the environment or formulated from commercially available components. Amending sand with leached alfalfa solids provided a simple formulated sediment that elicited consistently acceptable survival and growth in 28-day exposures with and without a daily feeding regime. A procedure is described for preparing the sediment along with results from comparisons among sand, amended sand, and field-collected sediments that incorporated three feeding regimes.

Propellant Feed Subsystem for the X-34 Main Propulsion System

NASA Technical Reports Server (NTRS)

McDonald, J. P.; Minor, R. B.; Knight, K. C.; Champion, R. H., Jr.; Russell, F. J., Jr.

1998-01-01

The Orbital Sciences Corporation X-34 vehicle demonstrates technologies and operations key to future reusable launch vehicles. The general flight performance goal of this unmanned rocket plane is Mach 8 flight at an altitude of 250,000 feet. The Main Propulsion System supplies liquid propellants to the main engine, which provides the primary thrust for attaining mission goals. Major NMS design and operational goals are aircraft-like ground operations, quick turnaround between missions, and low initial/operational costs. This paper reviews major design and analysis aspects of the X-34 propellant feed subsystem of the X-34 Main Propulsion System. Topics include system requirements, system design, the integration of flight and feed system performance, propellant acquisition at engine start, and propellant tank terminal drain.

Nasoenteral feeding tube placement by nurses using an electromagnetic guidance system (with video).

PubMed

Mathus-Vliegen, Elisabeth M H; Duflou, Ann; Spanier, Marcel B W; Fockens, Paul

2010-04-01

The early institution of feeding in patients who need postpyloric feeding tubes is often hampered by a limited availability of endoscopists experienced in safe tube positioning. To test the feasibility of having nurses place postpyloric feeding tubes by using a universal path finding system device. Prospective study. Academic hospital. The success rate and learning curve of a senior nurse placing postpyloric feeding tubes in 50 patients was studied, followed by a study in 160 patients on the success rates and learning curves of 4 inexperienced nurses instructed by the senior nurse. Finally, the success rate of postpyloric feeding tube placement by the senior nurse in 50 critically ill patients was investigated. Postpyloric feeding tube positioning by nurses using an electromagnetic universal path-finding system device enabling them to follow the path of the tip of the feeding tube on a monitor screen. Success was defined by postpyloric positioning of the feeding tube. The ultimate aim was to reach at least the duodenojejunal flexure. In the first part, the senior nurse was successful in 72% of cases. There was a clear learning curve. In the second part, the 4 newly instructed nurses had a success rate of 89.4% without an evident learning curve. In the third part, successful feeding tube positioning was achieved in 78% of critically ill patients. Of the 217 successfully positioned tubes, 74% reached at least the duodenojejunal flexure. In half of the unsuccessful cases, an explanation for the failure was found at endoscopy. No complications were seen. The generalization to less-specialized hospitals should be investigated. Postpyloric positioning of feeding tubes by nurses at the bedside without endoscopy is feasible and safe. Nurses may take over some of the tasks of doctors in a time of high endoscopic needs. Copyright 2010 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

A bio-economic analysis of a sustainable agricultural transition using green biorefinery.

PubMed

Cong, Rong-Gang; Termansen, Mette

2016-11-15

Traditional pig production often relies on cereal-based feed, which has adverse environmental effects, e.g. nitrogen leaching and greenhouse gas (GHG) emissions. Alternative production systems are therefore sought to improve the sustainability of pig production. A promising alternative is to use proteinaceous feed from grass, produced in a green bio-refinery (GBR), to substitute part of the cereals in the feed. Cultivation of grass on arable land can reduce nitrogen leaching and pesticide application, and increase carbon storage. The GBR using grass as feedstock also produces valuable byproducts, e.g. fibre and biogas. In this study we combine a life-cycle analysis (LCA) and a cost-benefit analysis to compare the economic and environmental effects of producing the pig feed to produce 1ton of pork using two feeding systems. We apply this approach to the intensive Danish pork production as a case study. The results show that compared with traditional cereal-based feeding system for producing a ton of pork, using proteinaceous concentrate from small-scale GBR will (1) decrease the average feed cost by 5.01%; (2) produce a profit of 96€ before tax in the GBR; and (3) decrease the nitrogen leaching (NO3-N) by 28.2%. However, in most of the scenarios (except for G2), the nitrogen emissions into the air (N2O-N) will also increase because of the increased N fertilizer application compared to a cereal-based system. In most of the scenarios (except for S1 and G1), the energy and land use will also be saved. However, some important factors, e.g. the soil characteristics, pressed juice fraction in fresh biomass and scale of GBR, could subvert the conclusion about energy and land use saving in the alternative feeding system. Copyright © 2016 Elsevier B.V. All rights reserved.

Upgrading plant amino acids through cattle to improve the nutritional value for humans: effects of different production systems.

PubMed

Patel, M; Sonesson, U; Hessle, A

2017-03-01

Efficiency in animal protein production can be defined in different ways, for example the amount of human-digestible essential amino acids (HDEAA) in the feed ration relative to the amount of HDEAA in the animal products. Cattle production systems are characterised by great diversity and a wide variety of feeds and feed ration compositions, due to ruminants' ability to digest fibrous materials inedible to humans such as roughage and by-products from the food and biofuel industries. This study examined the upgrading of protein quality through cattle by determining the quantity of HDEAA in feeds and animal products and comparing different milk and beef production systems. Four different systems for milk and beef production were designed, a reference production system for milk and beef representing typical Swedish production systems today and three alternative improved systems: (i) intensive cattle production based on maize silage, (ii) intensive systems based on food industry by-products for dairy cows and high-quality forage for beef cattle, and (iii) extensive systems based on forage with only small amounts of concentrate. In all four production systems, the quantity of HDEAA in the products (milk and meat) generally exceeded the quantity of HDEAA in the feeds. The intensive production models for beef calves generally resulted in output of the same magnitude as input for most HDEAA. However, in beef production based on calves from dairy cows, the intensive rearing systems resulted in lower output than input of HDEAA. For the extensive models, the amounts of HDEAA in meat were of the same magnitude as the amounts in the feeds. The extensive models with beef calves from suckler cows resulted in higher output in meat than input in feeds for all HDEAA. It was concluded that feeding cattle plants for production of milk and meat, instead of using the plants directly as human food, generally results in an upgrading of both the quantity and quality of protein, especially when extensive, forage-based production models are used. The results imply that the key to efficiency is the utilisation of human-inedible protein by cattle and justifies their contribution to food production, especially in regions where grasslands and/or forage production has comparative benefits over plant food production. By fine-tuning estimation of the efficiency of conversion from human-edible protein to HDEAA, comparisons of different sources of protein production may be more complete and the magnitude of amino acid upgrading in plants through cattle more obvious.

Use of fluorescence, a novel technique to determine reduction in Bemisia tabaci (Hemiptera: Aleyrodidae) nymph feeding when exposed to Benevia and other insecticides.

PubMed

Cameron, Rachel; Lang, Edward B; Annan, I Billy; Portillo, Hector E; Alvarez, Juan M

2013-04-01

The sweet potato whitefly, Bemisia tabaci (Gennadius), is an economically important pest in the United States and other countries. Growers in many places rely on the use of insecticides to reduce populations of B. tabaci. However, insecticides may take a few days to cause B. tabaci mortality and some do not reduce feeding before death. Earlier reduction of feeding of whiteflies would decrease the physiological effects on plants, reduce the production of sooty mold and potentially reduce the transmission of viruses. Measuring the reduction in feeding after the exposure of B. tabaci to an insecticide has proven difficult. This series of laboratory experiments demonstrate the usefulness of fluorescence in determining B. tabaci feeding cessation. Fluorescein sodium salt is systemically transported in the xylem from the roots to the plant leaves and absorbed by B. tabaci nymphs feeding on these plants. Nymphs start fluorescing shortly after the cotton plant root system is submerged in the fluorescein sodium salt. Using this novel technique, the effect of three insecticides with different modes of action, cyantraniliprole, imidacloprid, and spirotetramat on B. tabaci was evaluated and compared to determine reduction in feeding. Results indicate that B. tabaci nymphs feeding on a plant treated with Benevia have a significant reduction of feeding when compared with nymphs feeding on plants treated with imidacloprid or spirotetramat. Both Benevia and spirotetramat caused significant nymphal mortality by 48 h after exposure. This novel technique will be useful to demonstrate the feeding cessation or reduction in feeding produced by different insecticides in several sucking insect groups.

FEED FORWARD EQUATIONS.

DTIC Science & Technology

and feed forward stabilization) have been implemented. An on-mount gyro system consists of gyroscopes mounted on the radar antenna which sense...antenna motion and send compensating signals back to the antenna servo mechanism. Feed forward stabilization consists of determining antenna angular rates...caused by ships attitude changes, as measured by a stable platform (such as SINS), and feeding compensating signals back to the antenna servo

To feed or to breed: morphological constraints of mouthbrooding in coral reef cardinalfishes

PubMed Central

Hoey, Andrew S.; Bellwood, David R.; Barnett, Adam

2012-01-01

Functionally coupled biomechanical systems are widespread in nature and are viewed as major constraints on evolutionary diversification, yet there have been few attempts to explore the implications of performing multiple functions within a single anatomical structure. Paternally mouthbrooding cardinalfishes present an ideal system to investigate the constraints of functional coupling as the oral jaws of male fishes are directly responsible for both feeding and reproductive functions. To test the effects of (i) mouthbrooding on feeding and (ii) feeding on reproductive potential we compared the feeding apparatus between sexes of nine species of cardinalfish and compared brood characteristics among species from different trophic groups, respectively. Mouthbrooding was strongly associated with the morphology of the feeding apparatus in males. Male cardinalfishes possessed longer heads, snouts and jaws than female conspecifics irrespective of body size, trophic group or evolutionary history. Conversely, reproductive potential also appeared to be related to trophic morphology. Piscivorous cardinalfishes produced larger, but fewer eggs, and had smaller brood volumes than species from the two invertebrate feeding groups. These interrelationships suggest that feeding and reproduction in the mouth of cardinalfishes may be tightly coupled. If so this may, in part, have contributed to the limited morphological diversification exhibited by cardinalfishes. PMID:22319124

To feed or to breed: morphological constraints of mouthbrooding in coral reef cardinalfishes.

PubMed

Hoey, Andrew S; Bellwood, David R; Barnett, Adam

2012-06-22

Functionally coupled biomechanical systems are widespread in nature and are viewed as major constraints on evolutionary diversification, yet there have been few attempts to explore the implications of performing multiple functions within a single anatomical structure. Paternally mouthbrooding cardinalfishes present an ideal system to investigate the constraints of functional coupling as the oral jaws of male fishes are directly responsible for both feeding and reproductive functions. To test the effects of (i) mouthbrooding on feeding and (ii) feeding on reproductive potential we compared the feeding apparatus between sexes of nine species of cardinalfish and compared brood characteristics among species from different trophic groups, respectively. Mouthbrooding was strongly associated with the morphology of the feeding apparatus in males. Male cardinalfishes possessed longer heads, snouts and jaws than female conspecifics irrespective of body size, trophic group or evolutionary history. Conversely, reproductive potential also appeared to be related to trophic morphology. Piscivorous cardinalfishes produced larger, but fewer eggs, and had smaller brood volumes than species from the two invertebrate feeding groups. These interrelationships suggest that feeding and reproduction in the mouth of cardinalfishes may be tightly coupled. If so this may, in part, have contributed to the limited morphological diversification exhibited by cardinalfishes.

Prolonged Barium-Impaction Ileus in Two Lung Transplant Recipients With Systemic Sclerosis: Case Report.

PubMed

Tokman, S; Hays, S R; Leard, L E; Bush, E L; Kukreja, J; Kleinhenz, M E; Golden, J A; Singer, J P

2015-12-01

Lung transplantation can be a life-saving measure for people with end-stage lung disease from systemic sclerosis. However, outcomes of lung transplantation may be compromised by gastrointestinal manifestations of systemic sclerosis, which can involve any part of the gastrointestinal tract. Esophageal and gastric disease can be managed by enteral feeding with the use of a gastrojejunal feeding tube. In this report, we describe the clinical courses of 2 lung transplant recipients with systemic sclerosis who experienced severe and prolonged barium-impaction ileus after insertion of a percutaneous gastrojejunal feeding tube. Copyright © 2015 Elsevier Inc. All rights reserved.

Feed and manure use in low-N-input and high-N-input dairy cattle production systems

NASA Astrophysics Data System (ADS)

Powell, J. Mark

2014-11-01

In most parts of Sub-Saharan Africa fertilizers and feeds are costly, not readily available and used sparingly in agricultural production. In many parts of Western Europe, North America, and Oceania fertilizers and feeds are relatively inexpensive, readily available and used abundantly to maximize profitable agricultural production. A case study, dairy systems approach was used to illustrate how differences in feed and manure management in a low-N-input dairy cattle system (Niger, West Africa) and a high-N-input dairy production system (Wisconsin, USA) impact agricultural production and environmental N loss. In Niger, an additional daily feed N intake of 114 g per dairy animal unit (AU, 1000 kg live weight) could increase annual milk production from 560 to 1320 kg AU-1, and the additional manure N could greatly increase millet production. In Wisconsin, reductions in daily feed N intake of 100 g AU-1 would not greatly impact milk production but decrease urinary N excretion by 25% and ammonia and nitrous oxide emissions from manure by 18% to 30%. In Niger, compared to the practice of housing livestock and applying dung only onto fields, corralling cattle or sheep on cropland (to capture urinary N) increased millet yields by 25% to 95%. The additional millet grain due to dung applications or corralling would satisfy the annual food grain requirements of 2-5 persons; the additional forage would provide 120-300 more days of feed for a typical head of cattle; and 850 to 1600 kg ha-1 more biomass would be available for soil conservation. In Wisconsin, compared to application of barn manure only, corralling heifers in fields increased forage production by only 8% to 11%. The application of barn manure or corralling increased forage production by 20% to 70%. This additional forage would provide 350-580 more days of feed for a typical dairy heifer. Study results demonstrate how different approaches to feed and manure management in low-N-input and high-N-input dairy cattle systems impact milk production, manure N excretion, manure N capture, N recycling and environmental N loss.

The Iodine Satellite (iSat) Propellant Feed System - Design and Demonstration

NASA Technical Reports Server (NTRS)

Polzin, Kurt A.; Seixal, Joao F.; Mauro, Stephanie; Burt, Adam O.; Martinez, Armando; Peeples, Steven R.

2017-01-01

CUBESATS are relatively new spacecraft platforms that are typically deployed from a launch vehicle as a secondary payload, providing low-cost access to space for a wide range of end-users. These satellites are comprised of building blocks having dimensions of 10x10x10 cm3 and a mass of 1.33 kg (a 1-U size). While providing low-cost access to space, a major operational limitation is the lack of a propulsion system that can fit within a CubeSat and is capable of executing high Delta V maneuvers. This makes it difficult to use CubeSats on missions requiring certain types of maneuvers (i.e. formation flying, spacecraft rendezvous). Work has been performed investigating the use of iodine as a propellant for Hall-effect thrusters (HETs) that could subsequently be used to provide a high specific impulse path to CubeSat propulsion. One of the systems under development to support such a technology is the propellant feed system, which must be capable of storing solid iodine propellant, applying heat to sublime the stored solid into the vapor phase, and then control the flow of low-pressure gaseous iodine to both the thruster and cathode. In a test conducted in 2016, a first-generation iodine propellant feed system was integrated with a cathode and Hall thruster. While this test had to be terminated, the feed system in this first test was able to support both cathode and integrated cathode and thruster operation prior to the termination of the test. In the present paper, we describe work performed since that initial integrated test. The effort uses lessons learned from the previous integrated test, retiring risk associated with the iodine propellant feed system, answering open design-space questions, and demonstrating iodine flow control in an integrated system. The work is undertaken at both the component level and then at the integrated subsystem level to systematically improve the feed system design, improving the hardware fidelity so the appearance and operation of the system are as flight-like as possible. At the component level, the work focuses on the propellant tank, the feed system tubing, the valves used to control the flow to the cathode and thruster, and the heaters that maintain the temperature of the flowpaths and keep iodine from redepositing and clogging the system. Work on the propellant reservoir focuses on fabricating a tank that matches the geometry of the flight design, which allows for the identification of flight tank fabrication issues that may arise and permits thermal testing of a tank possessing the same size and thermal mass as the flight design, which can be used to anchor thermal modeling of the component. This is critical for finalizing the tank heater power requirements that feed into the heater design. All metallic materials in the feed system are hastelloy or Inconel, as these materials are resistant to chemical attack by the highly-reactive iodine vapor. The tubing in the iodine feed system must possess ports to permit a neutral gas purge of the system that clear impurities after iodine is loaded into the propellant tank. A procedure is discussed whereby these ports are crimped and sealed after the purge process is completed so as to not re-expose the iodine system to air. The valves are a critical component for control of the flow to the thruster and the cathode. Significant effort has gone into upgrading the materials of the valves to make them more resistant to chemical attack and into developing an understanding of the use of these valves during the startup and operation of the cathode and thruster. The heaters that line the entire feed system are designed to draw minimal power from the power processing unit (PPU) while still having the capacity to maintain all the feed system components at the temperatures required to discourage iodine deposition inside components downstream of the propellant tank exit. The heaters possess two separate resistive traces, giving the design redundancy should a failure occur in the primary heater circuit of one of the heater zones. The task of operating a feed system in conjunction with a thruster and cathode is undertaken in a series of sub-steps. The system is first assembled and operated on xenon gas, using the valves for cathode startup and thruster control based on measurement of the discharge current. After startup and control on xenon are demonstrated, the thruster will be transitioned to iodine operation, demonstrating thruster startup and feed system control while using a xenon-fed cathode. Finally, the last step is to integrate an iodine-compatible cathode with the system, demonstrate autonomous cathode start-up with open-loop control and thruster start-up with closed-loop control for multiple cycles.

Review: Feed demand landscape and implications of food-not feed strategy for food security and climate change.

PubMed

Makkar, H P S

2017-12-04

The food-feed competition is one of the complex challenges, and so are the ongoing climate change, land degradation and water shortage for realizing sustainable food production systems. By 2050 the global demand for animal products is projected to increase by 60% to 70%, and developing countries will have a lion's share in this increase. Currently, ~800 million tonnes of cereals (one-third of total cereal production) are used in animal feed and by 2050 it is projected to be over 1.1 billion tonnes. Most of the increase in feed demand will be in developing countries, which already face many food security challenges. Additional feed required for the projected increased demand of animal products, if met through food grains, will further exacerbate the food insecurity in these countries. Furthermore, globally, the production, processing and transport of feed account for 45% of the greenhouse gas emissions from the livestock sector. This paper presents approaches for addressing these challenges in quest for making livestock sector more sustainable. The use of novel human-inedible feed resources such as insect meals, leaf meals, protein isolates, single cell protein produced using waste streams, protein hydrolysates, spineless cactus, algae, co-products of the biofuel industry, food wastes among others, has enormous prospects. Efficient use of grasslands also offers possibilities for increasing carbon sequestration, land reclamation and livestock productivity. Opportunities also exist for decreasing feed wastages by simple and well proven practices such as use of appropriate troughs, increase in efficiency of harvesting crop residues and their conversion to complete feeds especially in the form of densified feed blocks or pellets, feeding as per the nutrient requirements, among others. Available evidence have been presented to substantiate arguments that: (a) for successful and sustained adoption of a feed technology, participation of the private sector and a sound business plan are required, (b) for sustainability of the livestock production systems, it is also important to consider the consumption of animal products and a case has been presented to assess future needs of animal source foods based on their requirements for healthy living, (c) for dairy animals, calculation of Emission Intensity based on the lifetime lactation rather than one lactation may also be considered and (d) for assessment of the efficiency of livestock production systems a holistic approach is required that takes into consideration social dimensions and net human-edible protein output from the system in addition to carbon and water footprints.

Optimization of Acetalated Dextran-Based Nanocomposite Microparticles for Deep Lung Delivery of Therapeutics via Spray-Drying.

PubMed

Wang, Zimeng; Meenach, Samantha A

2017-12-01

Nanocomposite microparticle (nCmP) systems exhibit promising potential in the application of therapeutics for pulmonary drug delivery. This work aimed at identifying the optimal spray-drying condition(s) to prepare nCmP with specific drug delivery properties including small aerodynamic diameter, effective nanoparticle (NP) redispersion upon nCmP exposure to an aqueous solution, high drug loading, and low water content. Acetalated dextran (Ac-Dex) was used to form NPs, curcumin was used as a model drug, and mannitol was the excipient in the nCmP formulation. Box-Behnken design was applied using Design-Expert software for nCmP parameter optimization. NP ratio (NP%) and feed concentration (Fc) are significant parameters that affect the aerodynamic diameters of nCmP systems. NP% is also a significant parameter that affects the drug loading. Fc is the only parameter that influenced the water content of the particles significantly. All nCmP systems could be completely redispersed into the parent NPs, indicating that none of the factors have an influence on this property within the design range. The optimal spray-drying condition to prepare nCmP with a small aerodynamic diameter, redispersion of the NPs, low water content, and high drug loading is 80% NP%, 0.5% Fc, and an inlet temperature lower than 130°C. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Early postnatal effects of noopept and piracetam on declarative and procedural memory of adult male and female rats.

PubMed

Trofimov, S S; Voronina, T A; Guzevatykh, L S

2005-06-01

We studied the effect of a new nootropic dipeptide Noopept and reference nootropic preparation piracetam injected subcutaneously on days 8-20 of life on learning of alternative feeding response in a 6-arm-maze in male and female rats. Early postnatal administration of Noopept disturbed the dynamics of learning by parameters of declarative and procedural memory. Piracetam impaired learning by parameters of procedural, but not declarative memory (only in males). Both preparations decreased the ratio of successfully learned males (but not females). The observed effects were not associated with changes in locomotor activity.

KSC-2011-8276

NASA Image and Video Library

2011-12-13

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians prepare to remove one of three fuel cells from space shuttle Atlantis’ payload bay. The fuel cells will be drained of all fluids. The hydrogen and oxygen dewars which feed reactants to the fuel cells remain in Atlantis’ mid-body and will be purged with inert gases and vented down. The work is part of the Space Shuttle Program’s transition and retirement processing of shuttle Atlantis. The orbiter is being prepared for display at the Kennedy Space Center Visitor Complex. Photo credit: NASA/Kim Shiflett

KSC-2011-8277

NASA Image and Video Library

2011-12-13

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians prepare to remove one of three fuel cells from space shuttle Atlantis’ payload bay. The fuel cells will be drained of all fluids. The hydrogen and oxygen dewars which feed reactants to the fuel cells remain in Atlantis’ mid-body and will be purged with inert gases and vented down. The work is part of the Space Shuttle Program’s transition and retirement processing of shuttle Atlantis. The orbiter is being prepared for display at the Kennedy Space Center Visitor Complex. Photo credit: NASA/Kim Shiflett

United Nations High Commissioner for Refugees feeding program performance in Kenya and Tanzania: a retrospective analysis of routine Health Information System data.

PubMed

Tappis, Hannah; Doocy, Shannon; Haskew, Christopher; Wilkinson, Caroline; Oman, Allison; Spiegel, Paul

2012-06-01

The United Nations High Commissioner for Refugees (UNHCR) Health Information System is a primary source of routine nutrition program data and provides a comprehensive assessment of UNHCR selective feeding programs in more than 90 refugee camps in 18 countries worldwide. To evaluate the coverage and effectiveness of UNHCR supplementary and therapeutic feeding programs for malnourished children under 5 years of age in Kenya and Tanzania refugee camps. Analysis of Kenya and Tanzania refugee camp population, growth monitoring and nutrition program data from the UNHCR Health Information System. UNHCR-supported implementing partners in Kenya and Tanzania admitted nearly 45,000 malnourished refugee children in selective feeding programs between January 2006 and May 2009. Average recovery rates of 77.1% and 84.6% in the therapeutic and supplementary programs, respectively, mortality rates of less than 1%, and average readmission below 5% suggest that feeding programs had a beneficial effect on enrolled children. Increasing admission and enrollment in supplementary feeding programs was successful in preventing cases of severe malnutrition in some camps. Further attention to these camps would be likely to yield sizeable benefits in terms of absolute reductions in malnutrition prevalence and mortality rates.

Breast-feeding and weaning practices in the DONALD study: age and time trends.

PubMed

Foterek, Kristina; Hilbig, Annett; Alexy, Ute

2014-03-01

Besides influencing short- and long-term health status, infant feeding practices are known to have an effect on later food preferences. This study aimed to identify present trends in breast-feeding duration and weaning practices with special focus on preparation methods of complementary food (CF), that is, homemade and commercial CF. In total, 1419 three-day weighed diet records collected between 2004 and 2012 from 366 children of the German DOrtmund Nutritional and Anthropometric Longitudinally Designed study ages 6 to 24 months were analysed. Full (n = 339) and total breast-feeding duration (n = 344) was collected by questionnaire. To investigate age and time trends, logistic regression and polynomial mixed regression models were used. Infants born between 2008 and 2012 were 3.3-fold less likely to be fully breast-fed for ≥4 months than those born before 2004 (P < 0.0001). Overall, 59.3% commercial, 21.1% homemade, and 19.6% combined CF was consumed by the study sample. Subjects with high commercial CF consumption (percentage of commercial CF > median 62%) were significantly older (P < 0.0001), showed shorter full and total breast-feeding duration (P < 0.0001), and were more likely to have mothers with a lower educational status (P = 0.01). Both commercial and homemade CF showed opposing, nonlinear age trends. No time trends could be found. Decreasing duration of full breast-feeding should encourage health care providers to further promote longer breast-feeding duration. With the constantly high consumption of commercial CF at all ages, nutritional adequacy of both homemade and commercial CF needs to be investigated closer, as does their long-term influence on health and dietary habits, for example, fruit and vegetable intake.

Comparison of calculated and experimentally determined SID of CP and AA in complex diets differing in AA contents for grower finisher pigs.

PubMed

Büsing, K; Berk, A; Müller, S; Kieckhäven, S; Krüger, K; Zeyner, A

2017-10-01

In practice, the content of standardized ileal digestible AA in complex feeds for pigs is calculated on the basis of tabulated values for individual feedstuffs. It comes into question, however, whether this truly reflects an accurate content based upon the estimate made for the individual feedstuffs. The objective of this study was to compare standardized ileal digestibility (SID) of crude protein (CP) and selected AA in complex feeds for grower and finisher pigs either calculated or experimentally determined. Six diets with increasing AA levels were prepared for grower (BW from 30 to 70 kg) and finisher (BW from 70 to 120 kg) feed. Crystalline L-lys, DL-met and L-thr were added to both diets, L-trp and L-val only to the grower feed. SID of both CP and AA was calculated from feed tables and experimentally determined in six adult minipigs (MINILEWE) with ileorectal anastomosis. With increasing AA levels, experimentally determined SID of supplemented AA increased (p < 0.05), but SID of CP (p ≥ 0.05) was not affected. In both grower and finisher feed, calculated and experimentally determined SID of CP, Met, Cys, Trp, Ile and Tyr differed by more than 2% units, but those of Lys and His only in the finisher feed. Yet this effect was not directly consistent. The margin of error following estimation of SID of AA via tabulated values for individual feedstuffs, however, seems to be acceptable for practical use. Journal of Animal Physiology and Animal Nutrition © 2017 Blackwell Verlag GmbH.

Feeding Frequency Affects Cultured Rat Pituitary Cells in Low Gravity

NASA Technical Reports Server (NTRS)

Hymer, W. C.; Grindeland, R. E.; Salada, T.; Cenci, R.; Krishnan, K.; Mukai, C.; Nagaoka, S.

1996-01-01

In this report, we describe the results of a rat pituitary cell culture experiment done on STS-65 in which the effect of cell feeding on the release of the six anterior pituitary hormones was studied. We found complex microgravity related interactions between the frequency of cell feeding and the quantity and quality (i.e. biological activity) of some of the six hormones released in flight. Analyses of growth hormone (GH) released from cells into culture media on different mission days using gel filtration and ion exchange chromatography yielded qualitatively similar results between ground and flight samples. Lack of cell feeding resulted in extensive cell clumping in flight (but not ground) cultures. Vigorous fibroblast growth occurred in both ground and flight cultures fed 4 times. These results are interpreted within the context of autocrine and or paracrine feedback interactions. Finally the payload specialist successfully prepared a fresh trypsin solution in microgravity, detached the cells from their surface and reinserted them back into the culture chamber. These cells reattached and continued to release hormone in microgravity. In summary, this experiment shows that pituitary cells are microgravity sensitive and that coupled operations routinely associated with laboratory cel1 culture can also be accomplished in low gravity.

Molecularly imprinted solid-phase extraction for determination of tilmicosin in feed using high performance liquid chromatography.

PubMed

Zheng, Yaqiu; Liu, Yahong; Guo, Hongbin; He, Limin; Fang, Binghu; Zeng, Zhenling

2011-04-01

A simple, sensitive and reproducible molecularly imprinted solid-phase extraction (MISPE) coupled with high performance liquid chromatographic method was developed for monitoring tilmicosin in feeds. The polymers were prepared using tylosin as mimic template molecule, methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross-linking monomer, and chloroform as a solvent by bulk polymerization. Under the optimum MISPE conditions, the novel polymer sorbent can selectively extract and enrich tilmicosin from variety of feeds. The MISPE cartridge was better than non-imprinted, C(18) and HLB cartridges in terms of both recovery and precision. Mean recoveries of tilmicosin from five kinds of feeds spiked at 1, 10 and 50 mg kg(-1) ranged from 76.9% to 95.6%, with intra-day and inter-day relative standard deviation less than 7.6%. The linearity was ranged from 1.0 to 100 mg L(-1) for matrix standard solution (r=0.9990). The limit of detection was approximately 0.35 mg kg(-1) and the limit of quantification was approximately 0.98 mg kg(-1). There was cleaner chromatogram by using MISPE than C(18) and HLB SPE. Copyright © 2011 Elsevier B.V. All rights reserved.