Experimental and Mathematical Modeling for Prediction of Tool Wear on the Machining of Aluminium 6061 Alloy by High Speed Steel Tools

NASA Astrophysics Data System (ADS)

Okokpujie, Imhade Princess; Ikumapayi, Omolayo M.; Okonkwo, Ugochukwu C.; Salawu, Enesi Y.; Afolalu, Sunday A.; Dirisu, Joseph O.; Nwoke, Obinna N.; Ajayi, Oluseyi O.

2017-12-01

In recent machining operation, tool life is one of the most demanding tasks in production process, especially in the automotive industry. The aim of this paper is to study tool wear on HSS in end milling of aluminium 6061 alloy. The experiments were carried out to investigate tool wear with the machined parameters and to developed mathematical model using response surface methodology. The various machining parameters selected for the experiment are spindle speed (N), feed rate (f), axial depth of cut (a) and radial depth of cut (r). The experiment was designed using central composite design (CCD) in which 31 samples were run on SIEG 3/10/0010 CNC end milling machine. After each experiment the cutting tool was measured using scanning electron microscope (SEM). The obtained optimum machining parameter combination are spindle speed of 2500 rpm, feed rate of 200 mm/min, axial depth of cut of 20 mm, and radial depth of cut 1.0mm was found out to achieved the minimum tool wear as 0.213 mm. The mathematical model developed predicted the tool wear with 99.7% which is within the acceptable accuracy range for tool wear prediction.

Modeling and Tool Wear in Routing of CFRP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iliescu, D.; Fernandez, A.; Gutierrez-Orrantia, M. E.

2011-01-17

This paper presents the prediction and evaluation of feed force in routing of carbon composite material. In order to extend tool life and improve quality of the machined surface, a better understanding of uncoated and coated tool behaviors is required. This work describes (1) the optimization of the geometry of multiple teeth tools minimizing the tool wear and the feed force, (2) the optimization of tool coating and (3) the development of a phenomenological model between the feed force, the routing parameters and the tool wear. The experimental results indicate that the feed rate, the cutting speed and the toolmore » wear are the most significant factors affecting the feed force. In the case of multiple teeth tools, a particular geometry with 14 teeth right helix right cut and 11 teeth left helix right cut gives the best results. A thick AlTiN coating or a diamond coating can dramatically improve the tool life while minimizing the axial force, roughness and delamination. A wear model has then been developed based on an abrasive behavior of the tool. The model links the feed rate to the tool geometry parameters (tool diameter), to the process parameters (feed rate, cutting speed and depth of cut) and to the wear. The model presented has been verified by experimental tests.« less

Triaxial X-Ray Diffraction Method and its Application to Monitor Residual Stress in Surface Layers after High-Feed Milling

NASA Astrophysics Data System (ADS)

Zaušková, Lucia; Czán, Andrej; Šajgalík, Michal; Pobijak, Jozef; Mikloš, Matej

2017-10-01

High-feed milling is a milling method characteristic with shallow depth of cut and high feed rate to maximize the amount of removed metal from a part, generating residual stresses in the surface and subsurface layers of the machined parts. The residual stress has a large influence on the functional properties of the components. The article is focused on the application of triaxial x-ray diffraction method to monitor residual stresses after high feed milling. Significance of triaxial measuring method is the capability of measuring in different angles so it is possible to acquire stress tensor containing normal and shear stress components.

Effect of small-scale turbulence on feeding rates of larval cod and haddock in stratified water on Georges Bank

NASA Astrophysics Data System (ADS)

Gregory Lough, R.; Mountain, David G.

A set of vertically stratified MOCNESS tows made on the southern flank of Georges Bank in spring 1981 and 1983 was analyzed to examine the relationship between larval cod and haddock feeding success and turbulent dissipation in a stratified water column. Observed feeding ratios (mean no. prey larval gut -1) for three size classes of larvae were compared with estimated ingestion rates using the Rothschild and Osborn ( Journal of Plankton Research, 10, 1988, 465-474) predator-prey encounter rate model. Simulation of contact rates requires parameter estimates of larval fish and their prey cruising speeds, density of prey, and turbulent velocity of the water column. Turbulent dissipation was estimated from a formulation by James ( Estuarine and Coastal Marine Science, 5, 1977, 339-353) incorporating both a wind a tidal component. Larval ingestion rates were based on swallowing probabilities derived from calm-water laboratory observations. Model-predicted turbulence profiles generally showed that dissipation rates were low to moderate (10 -11-10 -7 W kg -1). Turbulence was minimal at or below the pycnocline (≈ 25 m) with higher values(1-2 orders of magnitude) near the surface due to wind mixing and at depth due to shear in the tidal current near bottom. In a stratified water column during the day, first-feeding larvae (5-6 mm) were located mostly within or above the pycnocline coincident with their copepod prey (nauplii and copepodites). The 7-8 mm larvae were most abundant within the pycnocline, whereas the 9-10 mm larvae were found within and below the pycnocline. Feeding ratios were relatively low in early morning following darkness when the wind speed was low, but increased by a factor of 2-13 by noon and evening when the wind speed doubled. Comparison of depth-specific feeding ratios with estimated ingestion rates, derived from turbulence-affected contact rates, generally were reasonable after allowing for an average gut evacuation time (4 h), and in many cases the observed and estimated values had similar profiles. However, differences in vertical profiles may be attributed to differential digestion time, pursuit behavior affected by high turbulence, vertical migration of the larger larvae, an optimum light level for feeding, smaller-scale prey patchiness, and the gross estimates of turbulence. Response-surface estimation of averaged feeding ratios as a function of averaged prey density (0-50 m) with a minimum water-column turbulence value predicted that 5-6 mm larvae have a maximum feeding response at the highest prey densities (> 30 prey 1 -1) and lower turbulence estimates (<10 -10 W kg -1). The 7-8 mm and 9-10 mm larvae also have a maximum feeding response at high prey densities and low turbulence, but it extends to lower prey densities (> 10 prey 1 -1) as turbulence increases to intermidiate levels, clearly showing an interaction effect. In general, maximum feeding ratios occur at low to intermediate levels of turbulence where average prey density is greater than 10-20 prey 1 -1.

Pediatricians', obstetricians', gynecologists', and family medicine physicians' experiences with and attitudes about breast-feeding.

PubMed

Anchondo, Inés; Berkeley, Lizabeth; Mulla, Zuber D; Byrd, Theresa; Nuwayhid, Bahij; Handal, Gilbert; Akins, Ralitsa

2012-05-01

Investigate physicians' breast-feeding experiences and attitudes using a survey based on two behavioral theories: theory of reasoned action (TRA) and the health belief model (HBM). There were 73 participants included in the investigation. These participants were resident and faculty physicians from pediatrics, obstetrics/gynecology, and family medicine at a university campus, located on the US-Mexico border. The sample was reduced to 53 and 56 records for the attitude and confidence variables, respectively. Physicians answered a survey about their breast-feeding experiences and attitudes to learn about intention and ability applying constructs from TRA and HBM. An attitude scale, confidence variable (from self-efficacy items), and a lactation training index were created for the analysis. Analysis of the association between physicians' breastfeeding experiences and their attitudes revealed physicians are knowledgeable about breast-feeding and have positive attitudes towards breast-feeding. They did not seem to remember how long they breast-fed their children or whether they enjoyed breast-feeding, but they wanted to continue breast-feeding. Physicians cite work as a main reason for not continuing to breast-feed. Physicians' attitudes toward breast-feeding are positive. They are expected to practice health-promotion behavior including breast-feeding; however, physicians' breast-feeding rates are low and although they are knowledgeable about breast-feeding their training lacks on didactic depth and hands-on experience. If physicians learn more about breast-feeding and breast-feed exclusively and successfully, the rates in the United States would increase naturally.

77 FR 71022 - Self-Regulatory Organizations; National Stock Exchange, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

... Change To Clarify the Operation of the Exchange's Depth-of-Book Feed November 21, 2012. Pursuant to... distributes the NSX depth-of-book feed (``DOB feed'') to authorized recipients. The text of the proposed rule...

Rock Cutting Depth Model Based on Kinetic Energy of Abrasive Waterjet

NASA Astrophysics Data System (ADS)

Oh, Tae-Min; Cho, Gye-Chun

2016-03-01

Abrasive waterjets are widely used in the fields of civil and mechanical engineering for cutting a great variety of hard materials including rocks, metals, and other materials. Cutting depth is an important index to estimate operating time and cost, but it is very difficult to predict because there are a number of influential variables (e.g., energy, geometry, material, and nozzle system parameters). In this study, the cutting depth is correlated to the maximum kinetic energy expressed in terms of energy (i.e., water pressure, water flow rate, abrasive feed rate, and traverse speed), geometry (i.e., standoff distance), material (i.e., α and β), and nozzle system parameters (i.e., nozzle size, shape, and jet diffusion level). The maximum kinetic energy cutting depth model is verified with experimental test data that are obtained using one type of hard granite specimen for various parameters. The results show a unique curve for a specific rock type in a power function between cutting depth and maximum kinetic energy. The cutting depth model developed here can be very useful for estimating the process time when cutting rock using an abrasive waterjet.

Diamond Tool Specific Wear Rate Assessment in Granite Machining by Means of Knoop Micro-Hardness and Process Parameters

NASA Astrophysics Data System (ADS)

Goktan, R. M.; Gunes Yılmaz, N.

2017-09-01

The present study was undertaken to investigate the potential usability of Knoop micro-hardness, both as a single parameter and in combination with operational parameters, for sawblade specific wear rate (SWR) assessment in the machining of ornamental granites. The sawing tests were performed on different commercially available granite varieties by using a fully instrumented side-cutting machine. During the sawing tests, two fundamental productivity parameters, namely the workpiece feed rate and cutting depth, were varied at different levels. The good correspondence observed between the measured Knoop hardness and SWR values for different operational conditions indicates that it has the potential to be used as a rock material property that can be employed in preliminary wear estimations of diamond sawblades. Also, a multiple regression model directed to SWR prediction was developed which takes into account the Knoop hardness, cutting depth and workpiece feed rate. The relative contribution of each independent variable in the prediction of SWR was determined by using test statistics. The prediction accuracy of the established model was checked against new observations. The strong prediction performance of the model suggests that its framework may be applied to other granites and operational conditions for quantifying or differentiating the relative wear performance of diamond sawblades.

Aspects of ultra-high-precision diamond machining of RSA 443 optical aluminium

NASA Astrophysics Data System (ADS)

Mkoko, Z.; Abou-El-Hossein, K.

2015-08-01

Optical aluminium alloys such as 6061-T6 are traditionally used in ultra-high precision manufacturing for making optical mirrors for aerospace and other applications. However, the optics industry has recently witnessed the development of more advanced optical aluminium grades that are capable of addressing some of the issues encountered when turning with single-point natural monocrystalline diamond cutters. The advent of rapidly solidified aluminium (RSA) grades has generally opened up new possibilities for ultra-high precision manufacturing of optical components. In this study, experiments were conducted with single-point diamond cutters on rapidly solidified aluminium RSA 443 material. The objective of this study is to observe the effects of depth of cut and feed rate at a fixed rotational speed on the tool wear rate and resulting surface roughness of diamond turned specimens. This is done to gain further understanding of the rate of wear on the diamond cutters versus the surface texture generated on the RSA 443 material. The diamond machining experiments yielded machined surfaces which are less reflective but with consistent surface roughness values. Cutting tools were observed for wear through scanning microscopy; relatively low wear pattern was evident on the diamond tool edge. The highest tool wear were obtained at higher depth of cut and increased feed rate.

Modeling and Analysis of CNC Milling Process Parameters on Al3030 based Composite

NASA Astrophysics Data System (ADS)

Gupta, Anand; Soni, P. K.; Krishna, C. M.

2018-04-01

The machining of Al3030 based composites on Computer Numerical Control (CNC) high speed milling machine have assumed importance because of their wide application in aerospace industries, marine industries and automotive industries etc. Industries mainly focus on surface irregularities; material removal rate (MRR) and tool wear rate (TWR) which usually depends on input process parameters namely cutting speed, feed in mm/min, depth of cut and step over ratio. Many researchers have carried out researches in this area but very few have taken step over ratio or radial depth of cut also as one of the input variables. In this research work, the study of characteristics of Al3030 is carried out at high speed CNC milling machine over the speed range of 3000 to 5000 r.p.m. Step over ratio, depth of cut and feed rate are other input variables taken into consideration in this research work. A total nine experiments are conducted according to Taguchi L9 orthogonal array. The machining is carried out on high speed CNC milling machine using flat end mill of diameter 10mm. Flatness, MRR and TWR are taken as output parameters. Flatness has been measured using portable Coordinate Measuring Machine (CMM). Linear regression models have been developed using Minitab 18 software and result are validated by conducting selected additional set of experiments. Selection of input process parameters in order to get best machining outputs is the key contributions of this research work.

An experimental investigation on thermal exposure during bone drilling.

PubMed

Lee, Jueun; Ozdoganlar, O Burak; Rabin, Yoed

2012-12-01

This study presents an experimental investigation of the effects of spindle speed, feed rate, and depth of drilling on the temperature distribution during drilling of the cortical section of the bovine femur. In an effort to reduce measurement uncertainties, a new approach for temperature measurements during bone drilling is presented in this study. The new approach is based on a setup for precise positioning of multiple thermocouples, automated data logging system, and a computer numerically controlled (CNC) machining system. A battery of experiments that has been performed to assess the uncertainty and repeatability of the new approach displayed adequate results. Subsequently, a parametric study was conducted to determine the effects of spindle speed, feed rate, hole depth, and thermocouple location on the measured bone temperature. This study suggests that the exposure time during bone drilling far exceeds the commonly accepted threshold for thermal injury, which may prevail at significant distances from the drilled hole. Results of this study suggest that the correlation of the thermal exposure threshold for bone injury and viability should be further explored. Copyright © 2012 IPEM. Published by Elsevier Ltd. All rights reserved.

The machined surface of magnesium AZ31 after rotary turning at air cooling condition

NASA Astrophysics Data System (ADS)

Akhyar, G.; Purnomo, B.; Hamni, A.; Harun, S.; Burhanuddin, Y.

2018-04-01

Magnesium is a lightweight metal that is widely used as an alternative to iron and steel. Magnesium has been applied in the automotive industry to reduce the weight of a component, but the machining process has the disadvantage that magnesium is highly flammable because it has a low flash point. High temperature can cause the cutting tool wear and contributes to the quality of the surface roughness. The purpose of this study is to obtain the value of surface roughness and implement methods of rotary cutting tool and air cooling output vortex tube cooler to minimize the surface roughness values. Machining parameters that is turning using rotary cutting tool at speed the workpiece of (Vw) 50, 120, 160 m/min, cutting speed of rotary tool of (Vt) 25, 50, 75 m/min, feed rate of (f) 0.1, 0.15, 0.2 mm/rev, and depth of cut of 0.3 mm. Type of tool used is a carbide tool diameter of 16 mm and air cooling pressure of 6 bar. The results show the average value of the lowest surface roughness on the speed the workpiece of 80 m/min, cutting speed of rotary tool of 50 m/min, feed rate of 0.2 mm/rev, and depth of cut of 0.3 mm. While the average value of the highest surface roughness on the speed the workpiece of 160 m/min, cutting speed of rotary tool of 50 m/min, feed rate of 0.2 mm/rev, and depth of cut of 0.3 mm. The influence of machining parameters concluded the higher the speed of the workpiece the surface roughness value higher. Otherwise the higher cutting speed of rotary tool then the lower the surface roughness value. The observation on the surface of the rotary tool, it was found that no uniform tool wear which causes non-uniform surface roughness. The use of rotary cutting tool contributing to lower surface roughness values generated.

Machining of bone: Analysis of cutting force and surface roughness by turning process.

PubMed

Noordin, M Y; Jiawkok, N; Ndaruhadi, P Y M W; Kurniawan, D

2015-11-01

There are millions of orthopedic surgeries and dental implantation procedures performed every year globally. Most of them involve machining of bones and cartilage. However, theoretical and analytical study on bone machining is lagging behind its practice and implementation. This study views bone machining as a machining process with bovine bone as the workpiece material. Turning process which makes the basis of the actually used drilling process was experimented. The focus is on evaluating the effects of three machining parameters, that is, cutting speed, feed, and depth of cut, to machining responses, that is, cutting forces and surface roughness resulted by the turning process. Response surface methodology was used to quantify the relation between the machining parameters and the machining responses. The turning process was done at various cutting speeds (29-156 m/min), depths of cut (0.03 -0.37 mm), and feeds (0.023-0.11 mm/rev). Empirical models of the resulted cutting force and surface roughness as the functions of cutting speed, depth of cut, and feed were developed. Observation using the developed empirical models found that within the range of machining parameters evaluated, the most influential machining parameter to the cutting force is depth of cut, followed by feed and cutting speed. The lowest cutting force was obtained at the lowest cutting speed, lowest depth of cut, and highest feed setting. For surface roughness, feed is the most significant machining condition, followed by cutting speed, and with depth of cut showed no effect. The finest surface finish was obtained at the lowest cutting speed and feed setting. © IMechE 2015.

Identifying Variations in Baseline Behavior of Killer Whales (Orcinus orca) to Contextualize Their Responses to Anthropogenic Noise.

PubMed

Samarra, Filipa I P; Miller, Patrick J O

2016-01-01

Determining the baseline behavior of a whale requires understanding natural variations occurring due to environmental context, such as changes in prey behavior. Killer whales feeding on herring consistently encircle herring schools; however, depth of feeding differs from near the surface in winter to deeper than 10 m in spring and summer. These variations in feeding depth are probably due to the depth of the prey and the balance between the costs and benefits of bringing schools of herring to the surface. Such variation in baseline behavior may incur different energetic costs and consequently change the motivation of whales to avoid a feeding area. Here, we discuss these variations in feeding behavior in the context of exposure to noise and interpret observed responses to simulated navy sonar signals.

The effects of water depth on prey detection and capture by juvenile coho salmon and steelhead

Treesearch

J.J. Piccolo; N.F. Hughes; M.D. Bryant

2007-01-01

We used three-dimensional video analysis of feeding experiments to determine the effects of water depth on prey detection and capture by drift-feeding juvenile coho salmon (Oncorhynchus kisutch) and steelhead (0. mykiss irideus). Depth treatments were 0.15, 0.30, 0.45 and 0.60 m. Mean prey capture probabilities for both species...

Feasibility investigations on multi-cutter milling process: A novel fabrication method for microreactors with multiple microchannels

NASA Astrophysics Data System (ADS)

Pan, Minqiang; Zeng, Dehuai; Tang, Yong

A novel multi-cutter milling process for multiple parallel microchannels with manifolds is proposed to address the challenge of mass manufacture as required for cost-effective commercial applications. Several slotting cutters are stacked together to form a composite tool for machining microchannels simultaneously. The feasibility of this new fabrication process is experimentally investigated under different machining conditions and reaction characteristics of methanol steam reforming for hydrogen production. The influences of cutting parameters and the composite tool on the microchannel qualities and burr formation are analyzed. Experimental results indicate that larger cutting speed, smaller feed rate and cutting depth are in favor of obtaining relatively good microchannel qualities and small burrs. Of all the cutting parameters considered in these experiments, 94.2 m min -1 cutting speed, 23.5 mm min -1 feed rate and 0.5 mm cutting depth are found to be the optimum value. According to the comparisons of experimental results of multi-cutter milling process and estimated one of other alternative methods, it is found that multi-cutter milling process shows much shorter machining time and higher work removal rate than that of other alternative methods. Reaction characteristics of methanol steam reforming in microchannels also indicate that multi-cutter milling process is probably suitable for a commercial application.

Effects of prey abundance, distribution, visual contrast and morphology on selection by a pelagic piscivore

USGS Publications Warehouse

Hansen, Adam G.; Beauchamp, David A.

2014-01-01

Most predators eat only a subset of possible prey. However, studies evaluating diet selection rarely measure prey availability in a manner that accounts for temporal–spatial overlap with predators, the sensory mechanisms employed to detect prey, and constraints on prey capture.We evaluated the diet selection of cutthroat trout (Oncorhynchus clarkii) feeding on a diverse planktivore assemblage in Lake Washington to test the hypothesis that the diet selection of piscivores would reflect random (opportunistic) as opposed to non-random (targeted) feeding, after accounting for predator–prey overlap, visual detection and capture constraints.Diets of cutthroat trout were sampled in autumn 2005, when the abundance of transparent, age-0 longfin smelt (Spirinchus thaleichthys) was low, and 2006, when the abundance of smelt was nearly seven times higher. Diet selection was evaluated separately using depth-integrated and depth-specific (accounted for predator–prey overlap) prey abundance. The abundance of different prey was then adjusted for differences in detectability and vulnerability to predation to see whether these factors could explain diet selection.In 2005, cutthroat trout fed non-randomly by selecting against the smaller, transparent age-0 longfin smelt, but for the larger age-1 longfin smelt. After adjusting prey abundance for visual detection and capture, cutthroat trout fed randomly. In 2006, depth-integrated and depth-specific abundance explained the diets of cutthroat trout well, indicating random feeding. Feeding became non-random after adjusting for visual detection and capture. Cutthroat trout selected strongly for age-0 longfin smelt, but against similar sized threespine stickleback (Gasterosteus aculeatus) and larger age-1 longfin smelt in 2006. Overlap with juvenile sockeye salmon (O. nerka) was minimal in both years, and sockeye salmon were rare in the diets of cutthroat trout.The direction of the shift between random and non-random selection depended on the presence of a weak versus a strong year class of age-0 longfin smelt. These fish were easy to catch, but hard to see. When their density was low, poor detection could explain their rarity in the diet. When their density was high, poor detection was compensated by higher encounter rates with cutthroat trout, sufficient to elicit a targeted feeding response. The nature of the feeding selectivity of a predator can be highly dependent on fluctuations in the abundance and suitability of key prey.

"Who wants to eat in a toilet?" A social marketing approach to breast-feeding in public places and at work.

PubMed

Blair-Stevens, Terry; Cork, Sarah

2008-01-01

A public health project is described which used social marketing philosophy and techniques to find out how to help facilitate breast-feeding in public places and for mothers returning to work. As part of a strategy to increase local breast-feeding rates, Brighton and Hove Healthy City Partnership, representing the local Primary Care Trust, City Council and the business, academic and voluntary sectors, worked with a social marketing consultancy. The consultancy carried out a literature review and qualitative research that used creative engagement methods to consult with local people. The consultations were with key stakeholders, mothers, and groups traditionally less interested in the subject of breast-feeding, such as employers, elderly people, teenage boys, and fathers. The qualitative research generated in-depth insight and soundly-based, practical recommendations for facilitating breast-feeding. The social marketing approach helped to establish that any ensuing policies and practices would be acceptable to a wide range of the local population.

An Australian study of midwives' breast-feeding knowledge.

PubMed

Cantrill, Ruth M; Creedy, Debra K; Cooke, Marie

2003-12-01

To investigate midwives' breast-feeding knowledge, assess associations between knowledge and role, and report on the validity and reliability of the Breast-feeding Knowledge Questionnaire for the Australian context. Postal questionnaire. National Australia. Midwives (n=3500) who are members of the Australian College of Midwives Inc (ACMI). A response rate of 31% (n=1105) was obtained. Respondents were knowledgeable of the benefits of breast feeding and common management issues. Key areas requiring attention included management of low milk supply, immunological value of human milk, and management of a breast abscess during breast feeding. Participants over the age of 30, possessing IBCLC qualifications; having personal breast-feeding experience of more than three months; and more clinical experience achieved higher knowledge scores. Role perceptions were positive with 90% of midwives reporting being confident and effective in meeting the needs of breast-feeding women in the early postnatal period. Midwives' role perception contributed 39% of the variance in general breast-feeding knowledge scores and was a significant predictor of participants' breast-feeding knowledge. The level of basic breast-feeding knowledge of Australian midwives was adequate but there are deficits in key areas. Knowledge variations by midwives may contribute to conflicting advice experienced by breast-feeding women. Further research is needed to investigate in-depth breast-feeding knowledge, breast-feeding promotion practices, and associations between knowledge and practice.

Investigation of machinability characteristics on EN47 steel for cutting force and tool wear using optimization technique

NASA Astrophysics Data System (ADS)

M, Vasu; Shivananda Nayaka, H.

2018-06-01

In this experimental work dry turning process carried out on EN47 spring steel with coated tungsten carbide tool insert with 0.8 mm nose radius are optimized by using statistical technique. Experiments were conducted at three different cutting speeds (625, 796 and 1250 rpm) with three different feed rates (0.046, 0.062 and 0.093 mm/rev) and depth of cuts (0.2, 0.3 and 0.4 mm). Experiments are conducted based on full factorial design (FFD) 33 three factors and three levels. Analysis of variance is used to identify significant factor for each output response. The result reveals that feed rate is the most significant factor influencing on cutting force followed by depth of cut and cutting speed having less significance. Optimum machining condition for cutting force obtained from the statistical technique. Tool wear measurements are performed with optimum condition of Vc = 796 rpm, ap = 0.2 mm, f = 0.046 mm/rev. The minimum tool wear observed as 0.086 mm with 5 min machining. Analysis of tool wear was done by confocal microscope it was observed that tool wear increases with increasing cutting time.

Experimental investigation on hard turning of AISI 4340 steel using cemented coated carbide insert

NASA Astrophysics Data System (ADS)

Pradeep Kumar, J.; Kishore, K. P.; Ranjith Kumar, M.; Saran Karthick, K. R.; Vishnu Gowtham, S.

2018-02-01

Hard turning is a developing technology that offers many potential advantages compared to grinding, which remains the standard finishing process for critical hardened surfaces. In this work, an attempt has been made to experimentally investigate hard turning of AISI 4340 steel under wet and dry condition using cemented coated carbide insert. Hardness of the workpiece material is tested using Brinell and Rockwell hardness testers. CNC LATHE and cemented coated carbide inserts of designation CNMG 120408 are used for conducting experimental trials. Significant cutting parameters like cutting speed, feed rate and depth of cut are considered as controllable input parameters and surface roughness (Ra), tool wear are considered as output response parameters. Design of experiments is carried out with the help of Taguchi’s L9 orthogonal array. Results of response parameters like surface roughness and tool wear under wet and dry condition are analysed. It is found that surface roughness and tool wear are higher under dry machining condition when compared to wet machining condition. Feed rate significantly influences the surface roughness followed by cutting speed. Depth of cut significantly influences the tool wear followed by cutting speed.

Experimental Evaluation and Optimization of Flank Wear During Turning of AISI 4340 Steel with Coated Carbide Inserts Using Different Cutting Fluids

NASA Astrophysics Data System (ADS)

Lawal, S. A.; Choudhury, I. A.; Nukman, Y.

2015-01-01

The understanding of cutting fluids performance in turning process is very important in order to improve the efficiency of the process. This efficiency can be determined based on certain process parameters such as flank wear, cutting forces developed, temperature developed at the tool chip interface, surface roughness on the work piece, etc. In this study, the objective is to determine the influence of cutting fluids on flank wear during turning of AISI 4340 with coated carbide inserts. The performances of three types of cutting fluids were compared using Taguchi experimental method. The results show that palm kernel oil based cutting fluids performed better than the other two cutting fluids in reducing flank wear. Mathematical models for cutting parameters such as cutting speed, feed rate, depth of cut and cutting fluids were obtained from regression analysis using MINITAB 14 software to predict flank wear. Experiments were conducted based on the optimized values to validate the regression equations for flank wear and 5.82 % error was obtained. The optimal cutting parameters for the flank wear using S/N ratio were 160 m/min of cutting speed (level 1), 0.18 mm/rev of feed (level 1), 1.75 mm of depth of cut (level 2) and 2.97 mm2/s palm kernel oil based cutting fluid (level 3). ANOVA shows cutting speed of 85.36 %; and feed rate 4.81 %) as significant factors.

Foraging behavior of humpback whales: kinematic and respiratory patterns suggest a high cost for a lunge.

PubMed

Goldbogen, Jeremy A; Calambokidis, John; Croll, Donald A; Harvey, James T; Newton, Kelly M; Oleson, Erin M; Schorr, Greg; Shadwick, Robert E

2008-12-01

Lunge feeding in rorqual whales is a drag-based feeding mechanism that is thought to entail a high energetic cost and consequently limit the maximum dive time of these extraordinarily large predators. Although the kinematics of lunge feeding in fin whales supports this hypothesis, it is unclear whether respiratory compensation occurs as a consequence of lunge-feeding activity. We used high-resolution digital tags on foraging humpback whales (Megaptera novaengliae) to determine the number of lunges executed per dive as well as respiratory frequency between dives. Data from two whales are reported, which together performed 58 foraging dives and 451 lunges. During one study, we tracked one tagged whale for approximately 2 h and examined the spatial distribution of prey using a digital echosounder. These data were integrated with the dive profile to reveal that lunges are directed toward the upper boundary of dense krill aggregations. Foraging dives were characterized by a gliding descent, up to 15 lunges at depth, and an ascent powered by steady swimming. Longer dives were required to perform more lunges at depth and these extended apneas were followed by an increase in the number of breaths taken after a dive. Maximum dive durations during foraging were approximately half of those previously reported for singing (i.e. non-feeding) humpback whales. At the highest lunge frequencies (10 to 15 lunges per dive), respiratory rate was at least threefold higher than that of singing humpback whales that underwent a similar degree of apnea. These data suggest that the high energetic cost associated with lunge feeding in blue and fin whales also occurs in intermediate sized rorquals.

A comparison RSM and ANN surface roughness models in thin-wall machining of Ti6Al4V using vegetable oils under MQL-condition

NASA Astrophysics Data System (ADS)

Mohruni, Amrifan Saladin; Yanis, Muhammad; Sharif, Safian; Yani, Irsyadi; Yuliwati, Erna; Ismail, Ahmad Fauzi; Shayfull, Zamree

2017-09-01

Thin-wall components as usually applied in the structural parts of aeronautical industry require significant challenges in machining. Unacceptable surface roughness can occur during machining of thin-wall. Titanium product such Ti6Al4V is mostly applied to get the appropriate surface texture in thin wall designed requirements. In this study, the comparison of the accuracy between Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) in the prediction of surface roughness was conducted. Furthermore, the machining tests were carried out under Minimum Quantity Lubrication (MQL) using AlCrN-coated carbide tools. The use of Coconut oil as cutting fluids was also chosen in order to evaluate its performance when involved in end milling. This selection of cutting fluids is based on the better performance of oxidative stability than that of other vegetable based cutting fluids. The cutting speed, feed rate, radial and axial depth of cut were used as independent variables, while surface roughness is evaluated as the dependent variable or output. The results showed that the feed rate is the most significant factors in increasing the surface roughness value followed by the radial depth of cut and lastly the axial depth of cut. In contrary, the surface becomes smoother with increasing the cutting speed. From a comparison of both methods, the ANN model delivered a better accuracy than the RSM model.

Hydrogeomorphic and ecological control on carbonate dissolution in a patterned landscape in South Florida

NASA Astrophysics Data System (ADS)

Dong, X.; Heffernan, J. B.; Murray, A. B.; Cohen, M. J.; Martin, J. B.

2016-12-01

The evolution of the critical zone both shapes and reflects hydrologic, geochemical, and ecological processes. These interactions are poorly understood in karst landscapes with highly soluble bedrock. In this study, we used the regular-dispersed wetland basins of Big Cypress National Preserve in Florida as a focal case to model the hydrologic, geochemical, and biological mechanisms that affect soil development in karst landscapes. We addressed two questions: (1) What is the minimum timescale for wetland basin development, and (2) do changes in soil depth feed back on dissolution processes and if so by what mechanism? We developed an atmosphere-water-soil model with coupled water-solute transport, incorporating major ion equilibria and kinetic non-equilibrium chemistry, and biogenic acid production via roots distributed through the soil horizon. Under current Florida climate, weathering to a depth of 2 m (a typical depth of wetland basins) would take 4000 6000 yrs, suggesting that landscape pattern could have origins as recent as the most recent stabilization of sea level. Our model further illustrates that interactions between ecological and hydrologic processes influence the rate and depth-dependence of weathering. Absent inundation, dissolution rate decreased exponentially with distance from the bedrock to groundwater table. Inundation generally increased bedrock dissolution, but surface water chemistry and residence time produced complex and non-linear effects on dissolution rate. Biogenic acidity accelerated the dissolution rate by 50 and 1,000 times in inundated and exposed soils. Phase portrait analysis indicated that exponential decreases in bedrock dissolution rate with soil depth could produce stable basin depths. Negative feedback between hydro-period and total basin volume could stabilize the basin radius, but the lesser strength of this mechanism may explain the coalescence of wetland basins observed in some parts of the Big Cypress Landscape.

Depth Filters Containing Diatomite Achieve More Efficient Particle Retention than Filters Solely Containing Cellulose Fibers

PubMed Central

Buyel, Johannes F.; Gruchow, Hannah M.; Fischer, Rainer

2015-01-01

The clarification of biological feed stocks during the production of biopharmaceutical proteins is challenging when large quantities of particles must be removed, e.g., when processing crude plant extracts. Single-use depth filters are often preferred for clarification because they are simple to integrate and have a good safety profile. However, the combination of filter layers must be optimized in terms of nominal retention ratings to account for the unique particle size distribution in each feed stock. We have recently shown that predictive models can facilitate filter screening and the selection of appropriate filter layers. Here we expand our previous study by testing several filters with different retention ratings. The filters typically contain diatomite to facilitate the removal of fine particles. However, diatomite can interfere with the recovery of large biopharmaceutical molecules such as virus-like particles and aggregated proteins. Therefore, we also tested filtration devices composed solely of cellulose fibers and cohesive resin. The capacities of both filter types varied from 10 to 50 L m−2 when challenged with tobacco leaf extracts, but the filtrate turbidity was ~500-fold lower (~3.5 NTU) when diatomite filters were used. We also tested pre–coat filtration with dispersed diatomite, which achieved capacities of up to 120 L m−2 with turbidities of ~100 NTU using bulk plant extracts, and in contrast to the other depth filters did not require an upstream bag filter. Single pre-coat filtration devices can thus replace combinations of bag and depth filters to simplify the processing of plant extracts, potentially saving on time, labor and consumables. The protein concentrations of TSP, DsRed and antibody 2G12 were not affected by pre-coat filtration, indicating its general applicability during the manufacture of plant-derived biopharmaceutical proteins. PMID:26734037

Depth Filters Containing Diatomite Achieve More Efficient Particle Retention than Filters Solely Containing Cellulose Fibers.

PubMed

Buyel, Johannes F; Gruchow, Hannah M; Fischer, Rainer

2015-01-01

The clarification of biological feed stocks during the production of biopharmaceutical proteins is challenging when large quantities of particles must be removed, e.g., when processing crude plant extracts. Single-use depth filters are often preferred for clarification because they are simple to integrate and have a good safety profile. However, the combination of filter layers must be optimized in terms of nominal retention ratings to account for the unique particle size distribution in each feed stock. We have recently shown that predictive models can facilitate filter screening and the selection of appropriate filter layers. Here we expand our previous study by testing several filters with different retention ratings. The filters typically contain diatomite to facilitate the removal of fine particles. However, diatomite can interfere with the recovery of large biopharmaceutical molecules such as virus-like particles and aggregated proteins. Therefore, we also tested filtration devices composed solely of cellulose fibers and cohesive resin. The capacities of both filter types varied from 10 to 50 L m(-2) when challenged with tobacco leaf extracts, but the filtrate turbidity was ~500-fold lower (~3.5 NTU) when diatomite filters were used. We also tested pre-coat filtration with dispersed diatomite, which achieved capacities of up to 120 L m(-2) with turbidities of ~100 NTU using bulk plant extracts, and in contrast to the other depth filters did not require an upstream bag filter. Single pre-coat filtration devices can thus replace combinations of bag and depth filters to simplify the processing of plant extracts, potentially saving on time, labor and consumables. The protein concentrations of TSP, DsRed and antibody 2G12 were not affected by pre-coat filtration, indicating its general applicability during the manufacture of plant-derived biopharmaceutical proteins.

Deep neural network using color and synthesized three-dimensional shape for face recognition

NASA Astrophysics Data System (ADS)

Rhee, Seon-Min; Yoo, ByungIn; Han, Jae-Joon; Hwang, Wonjun

2017-03-01

We present an approach for face recognition using synthesized three-dimensional (3-D) shape information together with two-dimensional (2-D) color in a deep convolutional neural network (DCNN). As 3-D facial shape is hardly affected by the extrinsic 2-D texture changes caused by illumination, make-up, and occlusions, it could provide more reliable complementary features in harmony with the 2-D color feature in face recognition. Unlike other approaches that use 3-D shape information with the help of an additional depth sensor, our approach generates a personalized 3-D face model by using only face landmarks in the 2-D input image. Using the personalized 3-D face model, we generate a frontalized 2-D color facial image as well as 3-D facial images (e.g., a depth image and a normal image). In our DCNN, we first feed 2-D and 3-D facial images into independent convolutional layers, where the low-level kernels are successfully learned according to their own characteristics. Then, we merge them and feed into higher-level layers under a single deep neural network. Our proposed approach is evaluated with labeled faces in the wild dataset and the results show that the error rate of the verification rate at false acceptance rate 1% is improved by up to 32.1% compared with the baseline where only a 2-D color image is used.

Influence of particle size on Cutting Forces and Surface Roughness in Machining of B4Cp - 6061 Aluminium Matrix Composites

NASA Astrophysics Data System (ADS)

Hiremath, Vijaykumar; Badiger, Pradeep; Auradi, V.; Dundur, S. T.; Kori, S. A.

2016-02-01

Amongst advanced materials, metal matrix composites (MMC) are gaining importance as materials for structural applications in particular, particulate reinforced aluminium MMCs have received considerable attention due to their superior properties such as high strength to weight ratio, excellent low-temperature performance, high wear resistance, high thermal conductivity. The present study aims at studying and comparing the machinability aspects of B4Cp reinforced 6061Al alloy metal matrix composites reinforced with 37μm and 88μm particulates produced by stir casting method. The micro structural characterization of the prepared composites is done using Scanning Electron Microscopy equipped with EDX analysis (Hitachi Su-1500 model) to identify morphology and distribution of B4C particles in the 6061Al matrix. The specimens are turned on a conventional lathe machine using a Polly crystalline Diamond (PCD) tool to study the effect of particle size on the cutting forces and the surface roughness under varying machinability parameters viz., Cutting speed (29-45 m/min.), Feed rate (0.11-0.33 mm/rev.) and depth of cut (0.5-1mm). Results of micro structural characterization revealed fairly uniform distribution of B4C particles (in both cases i.e., 37μm and 88μm) in 6061Al matrix. The surface roughness of the composite is influenced by cutting speed. The feed rate and depth of cut have a negative influence on surface roughness. The cutting forces decreased with increase in cutting speed whereas cutting forces increased with increase in feed and depth of cut. Higher cutting forces are noticed while machining Al6061 base alloy compared to reinforced composites. Surface finish is high during turning of the 6061Al base alloy and surface roughness is high with 88μm size particle reinforced composites. As the particle size increases Surface roughness also increases.

Effect of grinding parameters on surface roughness and subsurface damage and their evaluation in fused silica.

PubMed

Xiao, Huapan; Chen, Zhi; Wang, Hairong; Wang, Jiuhong; Zhu, Nan

2018-02-19

Based on micro-indentation mechanics and kinematics of grinding processes, theoretical formulas are deduced to calculate surface roughness (SR) and subsurface damage (SSD) depth. The SRs and SSD depths of a series of fused silica samples, which are prepared under different grinding parameters, are measured. By experimental and theoretical analysis, the relationship between SR and SSD depth is discussed. The effect of grinding parameters on SR and SSD depth is investigated quantitatively. The results show that SR and SSD depth decrease with the increase of wheel speed or the decrease of feed speed as well as cutting depth. The interaction effect between wheel speed and feed speed should be emphasized greatly. Furthermore, a relationship model between SSD depth and grinding parameters is established, which could be employed to evaluate SSD depth efficiently.

Depth and substratum differentiations among coexisting herbivorous cichlids in Lake Tanganyika

PubMed Central

Ochi, Haruki

2016-01-01

Cichlid fish in Lake Tanganyika represent a system of adaptive radiation in which eight ancestral lineages have diversified into hundreds of species through adaptation to various niches. However, Tanganyikan cichlids have been thought to be oversaturated, that is, the species number exceeds the number of niches and ecologically equivalent and competitively even species coexist. However, recent studies have shed light on niche segregation on a finer scale among apparently equivalent species. We observed depth and substratum preferences of 15 herbivorous cichlids from four ecomorphs (i.e. grazer, browser, scraper and scooper) on a rocky littoral slope for 14 years. Depth differentiation was detected among grazers that defended feeding territories and among browsers with feeding territories. Cichlid species having no feeding territory also showed specificity on depth and substratum, resulting in habitat segregation among species that belong to the same ecomorph. Phylogenetically close species did not occupy adjacent depths, nor the opposite depth zones. Our findings suggest that apparently equivalent species of the same ecomorph coexist parapatrically along depth on a few-metre scale, or coexist with different substratum preferences on the rocky shore, and this niche segregation may have been acquired by competition between encountering equivalent species through repetitive lake-level fluctuations. PMID:28018609

Feeding in deep-sea demosponges: Influence of abiotic and biotic factors

NASA Astrophysics Data System (ADS)

Robertson, Leah M.; Hamel, Jean-François; Mercier, Annie

2017-09-01

In shallow benthic communities, sponges are widely recognized for their ability to contribute to food webs by cycling nutrients and mediating carbon fluxes through filter feeding. In comparison, little is known about filter feeding in deep-sea species and how it may be modulated by environmental conditions. Here, a rare opportunity to maintain live healthy deep-sea sponges for an extended period led to a preliminary experimental study of their feeding metrics. This work focused on demosponges collected from the continental slope of eastern Canada at 1000 m depth. Filtration rates (as clearance of phytoplankton cells) at holding temperature (6 °C) were positively correlated with food particle concentration, ranging on average from 18.8 to 160.6 cells ml-1 h-1 at nominal concentrations of 10,000-40,000 cells ml-1. Cell clearance was not significantly affected by decreasing seawater temperature, from 6 °C to 3 °C or 0 °C, although two of the sponges showed decreased filtration rates. Low pH ( 7.5) and the presence of a predatory sea star markedly depressed or inhibited feeding activity in all sponges tested. While performed under laboratory conditions on a limited number of specimens, this work highlights the possible sensitivity of deep-sea demosponges to various types and levels of biotic and abiotic factors, inferring a consequent vulnerability to natural and anthropogenic disturbances.

76 FR 39944 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... Change To Make Available Without Charge the EDGX Book Feed and To Add a Description of the EDGX Book Feed... make available without charge the EDGX book feed (``EDGX Book Feed''), an EDGX data feed that displays depth of book information. The Exchange also proposes to add a description of the EDGX Book Feed to new...

76 FR 39959 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... Change To Make Available Without Charge the EDGA Book Feed and To Add a Description of the EDGA Book Feed... make available without charge the EDGA book feed (``EDGA Book Feed''), an EDGA data feed that displays depth of book information. The Exchange also proposes to add a description of the EDGA Book Feed to new...

The use of feeding habitat by a colony of herons, egrets, and ibises near Beaufort, North Carolina

USGS Publications Warehouse

Custer, Thomas W.; Southern, William E.

1977-01-01

Nine species of herons were followed to their feeding sites from a nesting colony near Beaufort, North Carolina, by airplane. Except for the Cattle Egret, which flew exclusively to fields and dumps, all other species flew mainly to saltmarsh habitat. In addition, habitats were selected in relation to tidal depth and it appears, at least for the Great Egret, that low tide habitats were preferred. Most Great Egrets, White Ibises, Louisiana Herons, and Snowy Egrets flew close to the colony and numbers decreased farther from the colony. The Great Egret, Black-crowned Night Heron, and White Ibis flew farther from the colony at high than at low tide. In addition, the species differed in distance flown from the colony. Great Egrets traveled farther from the colony when they used thermals. Rate of travel to feeding sites, however, was the same whether Great Egrets used thermals or not. Aggressive encounters were observed in the Great Egret, Louisiana Heron, Snowy Egret, and Black-crowned Night Heron. Cattle Egrets and White Ibises followed other individuals to feeding sites and it appeared as though they were using the colony as an information center. The Great Egret is the only species to effectively use eelgrass beds near Beaufort. The Great Egrets use of this habitat was restricted to about 1.5 hours on either side of low tide. We suspect that other shorter legged species did not use eelgrass regularly because of its depth.

Supporting breast-feeding women from the perspective of the midwife: A systematic review of the literature.

PubMed

Swerts, Marlies; Westhof, Ellen; Bogaerts, Annick; Lemiengre, Joke

2016-06-01

In 2003 the World Health Organization (WHO) recommended that infants should be fed exclusively with breast milk until the age of six months. However, breast feeding rates remain lower than recommended. The crucial period for breast feeding support is the first two weeks after birth. During this period breast feeding support from the midwife is needed. The aim of this paper is to gain an in-depth understanding of the role of midwives in their support of breast-feeding women, from their own perspective. Two researchers independently conducted a systematic and comprehensive literature search. Studies needed an empirical qualitative research design (1), had to focus on the role of the midwife in the support of the breast-feeding woman from the midwife's perspective (2), and had to be published between January 2005 and December 2014 (3) in order to be included. Language restrictions were English, Dutch, German and French. Eight qualitative research studies were included, using mainly focus group and in-depth interview studies, which were reported in 11 papers representing 231 midwives and 24 maternity nurses. All but one study concerned midwives working in hospital settings. A critical appraisal was performed of each study. Midwives value breast feeding education and breast feeding support as a significant part of their role as a postnatal midwife. However, the ways in which a midwife approaches and supports the breast-feeding woman vary. We distinguished two perspectives: 'the midwife as technical expert' and 'the midwife as a skilled companion'. The 'technical expert' midwife is mainly breast centred, focuses on techniques, uses the hands on approach and sees a woman as a novice. The 'skilled companion' midwife is woman centred, focuses on the mother - infant relationship and uses a hands off approach during the breast feeding support. The midwives working in a hospital setting face many barriers when performing breast feeding support, such as time restraints, which makes it difficult for them to carry out their preferred role as a 'skilled companion'. These barriers can influence the breast feeding support negatively. Supporting factors, such as evidence based breast feeding guidelines, have a positive influence on the breast feeding support. On the basis of findings of a synthesis of qualitative research studies, we conclude that the majority of the midwives provide breast feeding support as a technical expert and a minority as a skilled companion. Midwives prefer to be a skilled companion but face many barriers in their working contexts. Copyright © 2016. Published by Elsevier Ltd.

FINAL REPORT INTEGRATED DM1200 MELTER TESTING OF BUBBLER CONFIGURATIONS USING HLW AZ-101 SIMULANTS VSL-04R4800-4 REV 0 10/5/04

DOE Office of Scientific and Technical Information (OSTI.GOV)

KRUGER AA; MATLACK KS; GONG W

2011-12-29

This report documents melter and off-gas performance results obtained on the DM1200 HLW Pilot Melter during processing of AZ-101 HLW simulants. The tests reported herein are a subset of six tests from a larger series of tests described in the Test Plan for the work; results from the other tests have been reported separately. The solids contents of the melter feeds were based on the WTP baseline value for the solids content of the feeds from pretreatment which changed during these tests from 20% to 15% undissolved solids resulting in tests conducted at two feed solids contents. Based on themore » results of earlier tests with single outlet 'J' bubblers, initial tests were performed with a total bubbling rate of 651 pm. The first set of tests (Tests 1A-1E) addressed the effects of skewing this total air flow rate back and forth between the two installed bubblers in comparison to a fixed equal division of flow between them. The second set of tests (2A-2D) addressed the effects of bubbler depth. Subsequently, as the location, type and number of bubbling outlets were varied, the optimum bubbling rate for each was determined. A third (3A-3C) and fourth (8A-8C) set of tests evaluated the effects of alternative bubbler designs with two gas outlets per bubbler instead of one by placing four bubblers in positions simulating multiple-outlet bubblers. Data from the simulated multiple outlet bubblers were used to design bubblers with two outlets for an additional set of tests (9A-9C). Test 9 was also used to determine the effect of small sugar additions to the feed on ruthenium volatility. Another set of tests (10A-10D) evaluated the effects on production rate of spiking the feed with chloride and sulfate. Variables held constant to the extent possible included melt temperature, plenum temperature, cold cap coverage, the waste simulant composition, and the target glass composition. The feed rate was increased to the point that a constant, essentially complete, cold cap was achieved, which was used as an indicator of a maximized feed rate for each test. The first day of each test was used to build the cold cap and decrease the plenum temperature. The remainder of each test was split into two- to six-day segments, each with a different bubbling rate, bubbler orientation, or feed concentration of chloride and sulfur.« less

Clam dredging effects and subsequent recovery of benthic communities at different depth ranges.

PubMed

Constantino, R; Gaspar, M B; Tata-Regala, J; Carvalho, S; Cúrdia, J; Drago, T; Taborda, R; Monteiro, C C

2009-03-01

This study aimed to assess the potential effects of clam dredging and the subsequent recovery of the benthic environment. Two experimental areas located at 6 and 18m depth were established in order to analyse whether impacts and recovery of benthic environment are depth-related. Study areas were located within an area closed to dredging and two different plots were established at both depths. One of the plots was subjected to intense clam dredge-fishing, while the other was undisturbed and therefore used as control. Sampling followed a BACI design, with samples for macrobenthic, meiobenthic and sediment particle size analysis being taken by SCUBA divers from both areas before and after fishing stress. For both depths, impacts on the benthic environment were very low resulting in high recovery rates. Nevertheless, at shallower depths communities demonstrated a faster recovery. It was shown that depending on the faunal component used as a bioindicator, different results can be observed. Generally deposit-feeding organisms with scales or chitinous plates and vermiform shape (mainly crustaceans, polychaetes and ophiuroids), without external protection, were the most affected by dredging, while some polychaetes without external protection and with a carnivorous feeding mode seemed to be enhanced by fishing. The low level of perturbations induced by the dredging activities was comparable to the impact of surface waves on the bottom, as experiments were undertaken in wave-dominated environments. The coexistence of storm events during the study period proved to have similar or even more deleterious effects on the benthic environment. It appears that communities from hydrodynamic fishing grounds that are well adapted to natural physical stress are not highly affected by dredging.

Prediction of surface roughness and cutting force under MQL turning of AISI 4340 with nano fluid by using response surface methodology

NASA Astrophysics Data System (ADS)

Patole, Pralhad B.; Kulkarni, Vivek V.

2018-06-01

This paper presents an investigation into the minimum quantity lubrication mode with nano fluid during turning of alloy steel AISI 4340 work piece material with the objective of experimental model in order to predict surface roughness and cutting force and analyze effect of process parameters on machinability. Full factorial design matrix was used for experimental plan. According to design of experiment surface roughness and cutting force were measured. The relationship between the response variables and the process parameters is determined through the response surface methodology, using a quadratic regression model. Results show how much surface roughness is mainly influenced by feed rate and cutting speed. The depth of cut exhibits maximum influence on cutting force components as compared to the feed rate and cutting speed. The values predicted from the model and experimental values are very close to each other.

In situ probing of temperature in radio frequency thermal plasma using Yttrium ion emission lines during synthesis of yttria nanoparticles

NASA Astrophysics Data System (ADS)

Dhamale, G. D.; Tiwari, N.; Mathe, V. L.; Bhoraskar, S. V.; Ghorui, S.

2017-07-01

Particle feeding is used in the most important applications of radio frequency (r.f.) thermal plasmas like synthesis of nanoparticles and particle spheroidization. The study reports an in-situ investigation of radial distribution of temperature in such devices using yttrium ion emission lines under different rates of particle loading during synthesis of yttria nanoparticles. A number of interesting facts about the response of r.f. plasma to the rate of particle loading, hitherto unknown, are revealed. Observed phenomena are supported with experimental data from fast photographic experiments and actual synthesis results. The use of the Abel inversion technique together with simultaneous multi-track acquisition of emission spectra from different spatial locations using a CCD based spectrometer allowed us to extract accurate distribution of temperature inside the plasma in the presence of inherent instabilities. The temperature profiles of this type of plasma have been measured possibly for the first time while particles are being fed into the plasma. Observed changes in the temperature profiles as the particle feed rate increases are very significant. Reaction forces resulting from particle evaporation, and increased skin depth owing to the decrease in electrical conductivity in the edge region are proposed as the two different mechanisms to account for the observed changes in the temperature profile as the powder feed rate is increased. Quantitative analyses supporting the proposed mechanisms are presented.

An empirical-statistical model for laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate

NASA Astrophysics Data System (ADS)

Nabhani, Mohammad; Razavi, Reza Shoja; Barekat, Masoud

2018-03-01

In this article, Ti-6Al-4V powder alloy was directly deposited on Ti-6Al-4V substrate using laser cladding process. In this process, some key parameters such as laser power (P), laser scanning rate (V) and powder feeding rate (F) play important roles. Using linear regression analysis, this paper develops the empirical-statistical relation between these key parameters and geometrical characteristics of single clad tracks (i.e. clad height, clad width, penetration depth, wetting angle, and dilution) as a combined parameter (PαVβFγ). The results indicated that the clad width linearly depended on PV-1/3 and powder feeding rate had no effect on it. The dilution controlled by a combined parameter as VF-1/2 and laser power was a dispensable factor. However, laser power was the dominant factor for the clad height, penetration depth, and wetting angle so that they were proportional to PV-1F1/4, PVF-1/8, and P3/4V-1F-1/4, respectively. Based on the results of correlation coefficient (R > 0.9) and analysis of residuals, it was confirmed that these empirical-statistical relations were in good agreement with the measured values of single clad tracks. Finally, these relations led to the design of a processing map that can predict the geometrical characteristics of the single clad tracks based on the key parameters.

Analyses of Diamond Wire Sawn Wafers: Effect of Various Cutting Parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sopori, Bhushan; Basnyat, Prakash; Devayajanam, Srinivas

We have evaluated surface characteristics of diamond wire cut (DWC) wafers sawn under a variety of cutting parameters. These characteristics include surface roughness, spatial frequencies of surface profiles, phase changes, damage depth, and lateral non-uniformities in the surface damage. Various cutting parameters investigated are: wire size, diamond grit size, reciprocating frequency, feed rate, and wire usage. Spatial frequency components of surface topography/roughness are influenced by individual cutting parameters as manifested by distinct peaks in the Fourier transforms of the Dektak profiles. The depth of damage is strongly controlled by diamond grit size and wire usage and to a smaller degreemore » by the wire size.« less

Comparative Investigation on Tool Wear during End Milling of AISI H13 Steel with Different Tool Path Strategies

NASA Astrophysics Data System (ADS)

Adesta, Erry Yulian T.; Riza, Muhammad; Avicena

2018-03-01

Tool wear prediction plays a significant role in machining industry for proper planning and control machining parameters and optimization of cutting conditions. This paper aims to investigate the effect of tool path strategies that are contour-in and zigzag tool path strategies applied on tool wear during pocket milling process. The experiments were carried out on CNC vertical machining centre by involving PVD coated carbide inserts. Cutting speed, feed rate and depth of cut were set to vary. In an experiment with three factors at three levels, Response Surface Method (RSM) design of experiment with a standard called Central Composite Design (CCD) was employed. Results obtained indicate that tool wear increases significantly at higher range of feed per tooth compared to cutting speed and depth of cut. This result of this experimental work is then proven statistically by developing empirical model. The prediction model for the response variable of tool wear for contour-in strategy developed in this research shows a good agreement with experimental work.

Experimental Investigations to evaluate the effects of cutting parameters on cutting temperature and residual stresses during milling process of the AISI 1045

NASA Astrophysics Data System (ADS)

Abdelkrim, M.; Brabie, G.; Belloufi, A.; Catalin, T.; Chirita, B.

2017-08-01

Today major metal cutting companies in industrial countries, looking to gain time and reduce manufacturing costs while respecting the environment. There are many phenomena which affect the quality and production costs of the product, including cutting efforts, cutting temperature, residual stresses, etc. A better understanding of these phenomena will reduce production costs and maximize productivity. The aim of this work is to analyze the effect of machining conditions (cutting speed, feed speed and cutting depth) on cutting temperature and residual stresses, during the milling operations using the response surface method. A good accuracy between predicted and measured values of the cutting temperature was found, the cutting speed and the depth of cut are parameters whose effect is most sensitive to the residual stresses and the cutting temperature.However, little influence has been registered in the case of an increase of the feed rate. The percentage of error is 4.57%, indicating that the numerical approach can accurately predict the cutting temperature of the AISI 1045.

Determining the Effect of Material Hardness During the Hard Turning of AISI4340 Steel

NASA Astrophysics Data System (ADS)

Kambagowni, Venkatasubbaiah; Chitla, Raju; Challa, Suresh

2018-05-01

In the present manufacturing industries hardened steels are most widely used in the applications like tool design and mould design. It enhances the application range of hard turning of hardened steels in manufacturing industries. This study discusses the impact of workpiece hardness, feed and depth of cut on Arithmetic mean roughness (Ra), root mean square roughness (Rq), mean depth of roughness (Rz) and total roughness (Rt) during the hard turning. Experiments have been planned according to the Box-Behnken design and conducted on hardened AISI4340 steel at 45, 50 and 55 HRC with wiper ceramic cutting inserts. Cutting speed is kept constant during this study. The analysis of variance was used to determine the effects of the machining parameters. 3-D response surface plots drawn based on RSM were utilized to set up the input-output relationships. The results indicated that the feed rate has the most significant parameter for Ra, Rq and Rz and hardness has the most critical parameter for the Rt. Further, hardness shows its influence over all the surface roughness characteristics.

Echolocation click rates and behavior of foraging Hawaiian spinner dolphins

NASA Astrophysics Data System (ADS)

Benoit-Bird, Kelly J.; Au, Whitlow W. L.

2004-05-01

Groups of spinner dolphins work together to actively aggregate small animals in the deep-scattering layer that serve as their prey. Detailed information on dolphin foraging behavior, obtained with a 200-kHz multibeam sonar (Simrad MS2000), made it possible to correlate echolocation and foraging. Fifty-six groups of spinner dolphins foraging at night within a midwater micronekton sound-scattering layer were observed with the sonar. During sonar surveys, the rates of whistles and echolocation clicks were measured using four hydrophones at 6-m depth intervals. Significant differences in click rates were found between depths and between the different stages of foraging. Groups of foraging dolphins ranged in size from 16 to 28 dolphins. Click rates were not significantly affected by the number of dolphins in a foraging group. Contrary to initial predictions, click rates were relatively low when sonar data indicated that pairs of dolphins were actively feeding. Highest echolocation rates occurred within the scattering layer, during transitions between foraging states. Whistles were only detected when dolphins were not in a foraging formation and when animals were surfacing. This suggests clicks may be used directly or indirectly to cue group movement during foraging.

Estimation of tool wear compensation during micro-electro-discharge machining of silicon using process simulation

NASA Astrophysics Data System (ADS)

Muralidhara, .; Vasa, Nilesh J.; Singaperumal, M.

2010-02-01

A micro-electro-discharge machine (Micro EDM) was developed incorporating a piezoactuated direct drive tool feed mechanism for micromachining of Silicon using a copper tool. Tool and workpiece materials are removed during Micro EDM process which demand for a tool wear compensation technique to reach the specified depth of machining on the workpiece. An in-situ axial tool wear and machining depth measurement system is developed to investigate axial wear ratio variations with machining depth. Stepwise micromachining experiments on silicon wafer were performed to investigate the variations in the silicon removal and tool wear depths with increase in tool feed. Based on these experimental data, a tool wear compensation method is proposed to reach the desired depth of micromachining on silicon using copper tool. Micromachining experiments are performed with the proposed tool wear compensation method and a maximum workpiece machining depth variation of 6% was observed.

Feeding ecology of mesopelagic zooplankton of the subtropical and subarctic North Pacific Ocean determined with fatty acid biomarkers

NASA Astrophysics Data System (ADS)

Wilson, S. E.; Steinberg, D. K.; Chu, F.-L. E.; Bishop, J. K. B.

2010-10-01

Mesopelagic zooplankton may meet their nutritional and metabolic requirements in a number of ways including consumption of sinking particles, carnivory, and vertical migration. How these feeding modes change with depth or location, however, is poorly known. We analyzed fatty acid (FA) profiles to characterize zooplankton diet and large particle (>51 μm) composition in the mesopelagic zone (base of euphotic zone -1000 m) at two contrasting time-series sites in the subarctic (station K2) and subtropical (station ALOHA) Pacific Ocean. Total FA concentration was 15.5 times higher in zooplankton tissue at K2, largely due to FA storage by seasonal vertical migrators such as Neocalanus and Eucalanus. FA biomarkers specific to herbivory implied a higher plant-derived food source at mesotrophic K2 than at oligotrophic ALOHA. Zooplankton FA biomarkers specific to dinoflagellates and diatoms indicated that diatoms, and to a lesser extent, dinoflagellates were important food sources at K2. At ALOHA, dinoflagellate FAs were more prominent. Bacteria-specific FA biomarkers in zooplankton tissue were used as an indicator of particle feeding, and peaks were recorded at depths where known particle feeders were present at ALOHA (e.g., ostracods at 100-300 m). In contrast, depth profiles of bacterial FA were relatively constant with depth at K2. Diatom, dinoflagellate, and bacterial biomarkers were found in similar proportions in both zooplankton and particles with depth at both locations, providing additional evidence that mesopelagic zooplankton consume sinking particles. Carnivory indices were higher and increased significantly with depth at ALOHA, and exhibited distinct peaks at K2, representing an increase in dependence on other zooplankton for food in deep waters. Our results indicate that feeding ecology changes with depth as well as by location. These changes in zooplankton feeding ecology from the surface through the mesopelagic zone, and between contrasting environments, have important consequences for the quality and quantity of organic material available to deeper pelagic and benthic food webs, and for organic matter sequestration.

Monitoring of Surface Roughness in Aluminium Turning Process

NASA Astrophysics Data System (ADS)

Chaijareenont, Atitaya; Tangjitsitcharoen, Somkiat

2018-01-01

As the turning process is one of the most necessary process. The surface roughness has been considered for the quality of workpiece. There are many factors which affect the surface roughness. Hence, the objective of this research is to monitor the relation between the surface roughness and the cutting forces in aluminium turning process with a wide range of cutting conditions. The coated carbide tool and aluminium alloy (Al 6063) are used for this experiment. The cutting parameters are investigated to analyze the effects of them on the surface roughness which are the cutting speed, the feed rate, the tool nose radius and the depth of cut. In the case of this research, the dynamometer is installed in the turret of CNC turning machine to generate a signal while turning. The relation between dynamic cutting forces and the surface roughness profile is examined by applying the Fast Fourier Transform (FFT). The experimentally obtained results showed that the cutting force depends on the cutting condition. The surface roughness can be improved when increasing the cutting speed and the tool nose radius in contrast to the feed rate and the depth of cut. The relation between the cutting parameters and the surface roughness can be explained by the in-process cutting forces. It is understood that the in-process cutting forces are able to predict the surface roughness in the further research.

Wear Mechanism of Chemical Vapor Deposition (CVD) Carbide Insert in Orthogonal Cutting Ti-6Al-4V ELI at High Cutting Speed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gusri, A. I.; Che Hassan, C. H.; Jaharah, A. G.

2011-01-17

The performance of Chemical Vapor Deposition (CVD) carbide insert with ISO designation of CCMT 12 04 04 LF, when turning titanium alloys was investigated. There were four layers of coating materials for this insert i.e.TiN-Al2O3-TiCN-TiN. The insert performance was evaluated based on the insert's edge resistant towards the machining parameters used at high cutting speed range of machining Ti-6Al-4V ELI. Detailed study on the wear mechanism at the cutting edge of CVD carbide tools was carried out at cutting speed of 55-95 m/min, feed rate of 0.15-0.35 mm/rev and depth of cut of 0.10-0.20 mm. Wear mechanisms such as abrasivemore » and adhesive were observed on the flank face. Crater wear due to diffusion was also observed on the rake race. The abrasive wear occurred more at nose radius and the fracture on tool were found at the feed rate of 0.35 mm/rev and the depth of cut of 0.20 mm. The adhesion wear takes place after the removal of the coating or coating delaminating. Therefore, adhesion or welding of titanium alloy onto the flank and rake faces demonstrates a strong bond at the workpiece-tool interface.« less

Wear Mechanism of Chemical Vapor Deposition (CVD) Carbide Insert in Orthogonal Cutting Ti-6Al-4V ELI at High Cutting Speed

NASA Astrophysics Data System (ADS)

Gusri, A. I.; Che Hassan, C. H.; Jaharah, A. G.

2011-01-01

The performance of Chemical Vapor Deposition (CVD) carbide insert with ISO designation of CCMT 12 04 04 LF, when turning titanium alloys was investigated. There were four layers of coating materials for this insert i.e.TiN-Al2O3-TiCN-TiN. The insert performance was evaluated based on the insert's edge resistant towards the machining parameters used at high cutting speed range of machining Ti-6Al-4V ELI. Detailed study on the wear mechanism at the cutting edge of CVD carbide tools was carried out at cutting speed of 55-95 m/min, feed rate of 0.15-0.35 mm/rev and depth of cut of 0.10-0.20 mm. Wear mechanisms such as abrasive and adhesive were observed on the flank face. Crater wear due to diffusion was also observed on the rake race. The abrasive wear occurred more at nose radius and the fracture on tool were found at the feed rate of 0.35 mm/rev and the depth of cut of 0.20 mm. The adhesion wear takes place after the removal of the coating or coating delaminating. Therefore, adhesion or welding of titanium alloy onto the flank and rake faces demonstrates a strong bond at the workpiece-tool interface.

A field observation of rotational feeding by Neogobius melanostomus

EPA Science Inventory

Video documentation was obtained of the invasive benthic fish, Neogobius melanostomus, the round goby, feeding on crushed dreissenid mussels at a depth of 12 m in Georgian Bay of Lake Huron, Canada. Gobies used rotational or twist feeding to tear away particles from crushed musse...

Keeping momentum with a mouthful of water: behavior and kinematics of humpback whale lunge feeding.

PubMed

Simon, Malene; Johnson, Mark; Madsen, Peter T

2012-11-01

Rorqual baleen whales lunge feed by engulfment of tons of prey-laden water in a large and expandable buccal pouch. According to prior interpretations, feeding rorquals are brought to a near-halt at the end of each lunge by drag forces primarily generated by the open mouth. Accelerating the body from a standstill is energetically costly and is purported to be the key factor determining oxygen consumption in lunge-feeding rorquals, explaining the shorter dive times than expected given their sizes. Here, we use multi-sensor archival tags (DTAGs) sampling at high rates in a fine-scale kinematic study of lunge feeding to examine the sequence of events within lunges and how energy may be expended and conserved in the process of prey capture. Analysis of 479 lunges from five humpback whales reveals that the whales accelerate as they acquire prey, opening their gape in synchrony with strong fluke strokes. The high forward speed (mean depth rate: 2.0±0.32 m s(-1)) during engulfment serves both to corral active prey and to expand the ventral margin of the buccal pouch and so maximize the engulfed water volume. Deceleration begins after mouth opening when the pouch nears full expansion and momentum starts to be transferred to the engulfed water. Lunge-feeding humpback whales time fluke strokes throughout the lunge to impart momentum to the engulfed water mass and so avoid a near or complete stop, but instead continue to glide at ~1-1.5 m s(-1) after the lunge has ended. Subsequent filtration and prey handling appear to take an average of 46 s and are performed in parallel with re-positioning for the next lunge.

Preliminary results of geothermal desalting operations at the East Mesa test site Imperial Valley, California

NASA Technical Reports Server (NTRS)

Suemoto, S. H.; Mathias, K. E.

1974-01-01

The Bureau of Reclamation has erected at its Geothermal Resource Development site two experimental test vehicles for the purpose of desalting hot fluids of geothermal origin. Both plants have as a feed source geothermal well Mesa 6-1 drilled to a total depth of 8,030 feet and having a bottom hole temperature of 400 F. Formation fluid collected at the surface contained 24,800 mg/1 total dissolved solids. The dissolved solids consist mainly of sodium chloride. A multistage distillation (3-stage) plant has been operated intermittently for one year with no operational problems. Functioning at steady-state conditions with a liquid feed rate of 70 g/m and a temperature of 221 F, the final brine blowdown temperature was 169 F. Product water was produced at a rate of about 2 g/m; average total dissolved solids content of the product was 170 mg/1. A product quality of 27.5 mg/1 at a pH of 9.5 was produced from the first stage.

Diel feeding behavior and ingestion rate in the copepod Calanus finmarchicus in the southern Gulf of Maine during late spring

NASA Astrophysics Data System (ADS)

Durbin, Edward G.; Campbell, Robert G.; Gilman, Sharon L.; Durbin, Ann G.

In situ feeding was measured on late stage Calanus finmarchicus in the southern Gulf of Maine during late spring 1988 and 1989. The region is a spring feeding ground for the planktivorous right whale, Eubalaena glacialis. Measurements in 1988 were made during the declining spring bloom, when phytoplankton showed considerable spatial variability. 1989 observations were made after summer stratification had become established, when phytoplankton biomass was low and dominated by the <7 μm size fraction. In situ ingestion rates of C. finmarchicus reflected these differences in food, and ranged from 30.2% body C day -1 at a spring bloom station to 0.6% body C day -1 after stratification. These values compare with a maximum ingestion rate of 44.3% body C day -1 measured in a shipboard grazing experiment using cultured algae as food, and indicate that C. finmarchicus became food limited in the southern Gulf of Maine after stratification. Calanus finmarchicus diet feeding behavior and diet vertical migration patterns changed during the seasonal progression from spring bloom to summer stratification. Diet feeding rhythms and vertical migration were absent during the bloom, but developed as the bloom declined. During the post-bloom stratified conditions, diet feeding rhythms continued but vertical migration ceased. Most of the C. finmarchicus population remained near the surface, while a small population of nonmigratory individuals resided at depth and appeared to be feeding upon sedimented spring bloom diatoms. At the spring bloom station C. finmarchicus ingested only a small proportion of the phytoplankton standing stock in the > 7 μm size fraction (2.9% day -1), reflecting the high biomass of phytoplankton and the stage composition of the C. finmarchicus population, dominated by early copepodite stages with low biomass. In contrast, at the post-bloom stations in 1989, the dense surface aggregations of C. finmarchicus populations were dominated by late copepodite stages whose total biomass was comparable to that of the phytoplankton, and C. finmarchicus consumed a significantly larger fraction of the > 7 μm phytoplankton standing crop (up to 62.5% day -1.

Lewis Pressurized, Fluidized-Bed Combustion Program. Data and Calculated Results

NASA Technical Reports Server (NTRS)

Rollbuhler, R. J.

1982-01-01

A 200 kilowatt (thermal), pressurized, fluidized bed (PFB) reactor and research test facility were designed, constructed, and operated. The facility was established to assess and evaluate the effect of PFB hot gas effluent on aircraft turbine engine materials that may have applications in stationary powerplant turbogenerators. The facility was intended for research and development work and was designed to operate over a wide range of conditions. These conditions included the type and rate of consumption of fuel (e.g., coal) and sulfur reacting sorbent material: the ratio of feed fuel to sorbent material; the ratio of feed fuel to combustion airflow; the depth of the fluidized reaction bed; the temperature and pressure in the reaction bed; and the type of test unit that was exposed to the combustion exhaust gases.

Lewis pressurized, fluidized-bed combustion program. Data and calculated results

NASA Astrophysics Data System (ADS)

Rollbuhler, R. J.

1982-03-01

A 200 kilowatt (thermal), pressurized, fluidized bed (PFB) reactor and research test facility were designed, constructed, and operated. The facility was established to assess and evaluate the effect of PFB hot gas effluent on aircraft turbine engine materials that may have applications in stationary powerplant turbogenerators. The facility was intended for research and development work and was designed to operate over a wide range of conditions. These conditions included the type and rate of consumption of fuel (e.g., coal) and sulfur reacting sorbent material: the ratio of feed fuel to sorbent material; the ratio of feed fuel to combustion airflow; the depth of the fluidized reaction bed; the temperature and pressure in the reaction bed; and the type of test unit that was exposed to the combustion exhaust gases.

Morphology and Efficiency of a Specialized Foraging Behavior, Sediment Sifting, in Neotropical Cichlid Fishes

PubMed Central

Willis, Stuart; Watkins, Crystal; Honeycutt, Rodney L.; Winemiller, Kirk O.

2014-01-01

Understanding of relationships between morphology and ecological performance can help to reveal how natural selection drives biological diversification. We investigate relationships between feeding behavior, foraging performance and morphology within a diverse group of teleost fishes, and examine the extent to which associations can be explained by evolutionary relatedness. Morphological adaptation associated with sediment sifting was examined using a phylogenetic linear discriminant analysis on a set of ecomorphological traits from 27 species of Neotropical cichlids. For most sifting taxa, feeding behavior could be effectively predicted by a linear discriminant function of ecomorphology across multiple clades of sediment sifters, and this pattern could not be explained by shared evolutionary history alone. Additionally, we tested foraging efficiency in seven Neotropical cichlid species, five of which are specialized benthic feeders with differing head morphology. Efficiency was evaluated based on the degree to which invertebrate prey could be retrieved at different depths of sediment. Feeding performance was compared both with respect to feeding mode and species using a phylogenetic ANCOVA, with substrate depth as a covariate. Benthic foraging performance was constant across sediment depths in non-sifters but declined with depth in sifters. The non-sifting Hypsophrys used sweeping motions of the body and fins to excavate large pits to uncover prey; this tactic was more efficient for consuming deeply buried invertebrates than observed among sediment sifters. Findings indicate that similar feeding performance among sediment-sifting cichlids extracting invertebrate prey from shallow sediment layers reflects constraints associated with functional morphology and, to a lesser extent, phylogeny. PMID:24603485

Morphology and efficiency of a specialized foraging behavior, sediment sifting, in neotropical cichlid fishes.

PubMed

López-Fernández, Hernán; Arbour, Jessica; Willis, Stuart; Watkins, Crystal; Honeycutt, Rodney L; Winemiller, Kirk O

2014-01-01

Understanding of relationships between morphology and ecological performance can help to reveal how natural selection drives biological diversification. We investigate relationships between feeding behavior, foraging performance and morphology within a diverse group of teleost fishes, and examine the extent to which associations can be explained by evolutionary relatedness. Morphological adaptation associated with sediment sifting was examined using a phylogenetic linear discriminant analysis on a set of ecomorphological traits from 27 species of Neotropical cichlids. For most sifting taxa, feeding behavior could be effectively predicted by a linear discriminant function of ecomorphology across multiple clades of sediment sifters, and this pattern could not be explained by shared evolutionary history alone. Additionally, we tested foraging efficiency in seven Neotropical cichlid species, five of which are specialized benthic feeders with differing head morphology. Efficiency was evaluated based on the degree to which invertebrate prey could be retrieved at different depths of sediment. Feeding performance was compared both with respect to feeding mode and species using a phylogenetic ANCOVA, with substrate depth as a covariate. Benthic foraging performance was constant across sediment depths in non-sifters but declined with depth in sifters. The non-sifting Hypsophrys used sweeping motions of the body and fins to excavate large pits to uncover prey; this tactic was more efficient for consuming deeply buried invertebrates than observed among sediment sifters. Findings indicate that similar feeding performance among sediment-sifting cichlids extracting invertebrate prey from shallow sediment layers reflects constraints associated with functional morphology and, to a lesser extent, phylogeny.

Feeding habitat use by colonially-breeding herons, egrets, and ibises in North Carolina

USGS Publications Warehouse

Custer, Thomas W.; Osborn, Ronald G.

1978-01-01

Nine species of herons, egrets, and ibises were followed by airplane from a nesting colony near Beaufort, North Carolina to their feeding sites. Except for Cattle Egrets, which flew exclusively to fields and dumps, the birds flew mainly to saltmarsh habitat. The selection of feeding habitats by Great Egrets and Louisiana Herons was directly related to tidal depth. The Great Egret was the only species that effectively used eelgrass beds, and its use of this habitat was restricted to between 1.5 h before and after low tide. We suspect that shorter-legged herons did not use eelgrass regularly because the water was too deep. Most Great Egrets, White Ibises, Louisiana Herons, and Snowy Egrets used areas near the colony (<4 km). Great Egrets, Black-crowned Night Herons, and White Ibises flew farther from the colony at high than at low tide. Great Egrets traveled farther from the colony when they used thermals; rate of travel to feeding sites was the same, however, whether or not they used thermals. Aggressive encounters were observed at the landing sites of Great Egrets, Louisiana Herons, Snowy Egrets, and Black-crowned Night Herons. In contrast to the other species studied, Cattle Egrets and White Ibises often flew in groups to feeding sites. Indirect evidence supports the hypothesis that colonies can act as "information centres," wherein unsuccessful birds follow successful ones to better feeding locations.

Why Do Mothers of Young Infants Choose to Formula Feed in China? Perceptions of Mothers and Hospital Staff

PubMed Central

Zhang, Ke; Tang, Li; Wang, Hong; Qiu, Li-Qian; Binns, Colin W.; Lee, Andy H.

2015-01-01

In China the exclusive breastfeeding rate remains low and infant formula is widely used. This study aimed to elicit and compare mothers’ and hospital staff perceptions of the reasons that shaped mothers’ decision to formula feed. In-depth interviews with 50 mothers, and four focus group discussions with 33 hospital staff, were conducted in Hangzhou and Shenzhen in November 2014. Responses given by the mothers and hospital staff showed a number of commonalities. The perception of “insufficient breast milk” was cited by the majority of women (n = 37, 74%) as the reason for formula feeding. Mothers’ confidence in breastfeeding appears to be further reduced by maternal mothers or mothers-in-law’s and “confinement ladies” misconceptions about infant feeding. Inadequate breastfeeding facilities and limited flexibility at their workplace was another common reason given for switching to formula feeding. A substantial proportion of mothers (n = 27, 54%) lacked an understanding of the health benefits of breastfeeding. Antenatal education on breastfeeding benefits for expectant mothers and their families is recommended. Moreover, mothers should be provided with breastfeeding support while in hospital and be encouraged to seek professional assistance to deal with breastfeeding problems after discharge. Employers should also make work environments more breastfeeding-friendly. PMID:25918908

Why do mothers of young infants choose to formula feed in China? Perceptions of mothers and hospital staff.

PubMed

Zhang, Ke; Tang, Li; Wang, Hong; Qiu, Liqian; Binns, Colin W; Lee, Andy H

2015-04-24

In China the exclusive breastfeeding rate remains low and infant formula is widely used. This study aimed to elicit and compare mothers' and hospital staff perceptions of the reasons that shaped mothers' decision to formula feed. In-depth interviews with 50 mothers, and four focus group discussions with 33 hospital staff, were conducted in Hangzhou and Shenzhen in November 2014. Responses given by the mothers and hospital staff showed a number of commonalities. The perception of "insufficient breast milk" was cited by the majority of women (n = 37, 74%) as the reason for formula feeding. Mothers' confidence in breastfeeding appears to be further reduced by maternal mothers or mothers-in-law's and "confinement ladies" misconceptions about infant feeding. Inadequate breastfeeding facilities and limited flexibility at their workplace was another common reason given for switching to formula feeding. A substantial proportion of mothers (n = 27, 54%) lacked an understanding of the health benefits of breastfeeding. Antenatal education on breastfeeding benefits for expectant mothers and their families is recommended. Moreover, mothers should be provided with breastfeeding support while in hospital and be encouraged to seek professional assistance to deal with breastfeeding problems after discharge. Employers should also make work environments more breastfeeding-friendly.

TANK 32 EVAPORATOR FEED PUMP TRANSFER ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tamburello, D; Richard Dimenna, R; Si Lee, S

2009-01-27

The transfer of liquid salt solution from Tank 32 to an evaporator is to be accomplished by activating the evaporator feed pump, with the supernate surface at a minimum height of approximately 74.4 inches above the sludge layer, while simultaneously turning on the downcomer with a flow rate of 110 gpm. Previously, activation of the evaporator feed pump was an isolated event without any other components running at the same time. An analysis of the dissolved solution transfer has been performed using computational fluid dynamics (CFD) methods to determine the amount of entrained sludge solids pumped out of the tankmore » toward the evaporator with the downcomer turned on. The analysis results shows that, for the minimum tank liquid level of 105 inches above the tank bottom (which corresponds to a liquid depth of 74.4 inches above the sludge layer), the evaporator feed pump will contain less than 0.1 wt% sludge solids in the discharge stream, which is an order of magnitude less than the 1.0 wt% undissolved solids (UDS) loading criteria to feed the evaporator. Lower liquid levels with respect to the sludge layer will result in higher amounts of sludge entrainment due to the increased plunging jet velocity from the downcomer disturbing the sludge layer.« less

Spoon-Feeding: Or How I Learned to Stop Worrying and Love the Mess

ERIC Educational Resources Information Center

Smith, Holly

2008-01-01

The author, a programme leader for a Post Graduate Certificate in Learning and Teaching in Higher Education (PGCLTHE), hears a complaint from her colleagues that undergraduate students require "spoon-feeding". Accepting structuralism's argument that language does things, not just describe them, the author examines "spoon-feeding" in more depth.…

Using qualitative methods to design a culturally appropriate child feeding questionnaire for low-income, Latina mothers.

PubMed

Lindsay, Ana Cristina; Sussner, Katrina Mucha; Greaney, Mary; Wang, Monica L; Davis, Rachel; Peterson, Karen E

2012-05-01

Obesity rates remain high among children in the United States (US), but children of low-income, minority families are at particularly high risk. Latinos are the largest and most rapidly growing US population group. Effective strategies will require attention to a wide array of culturally mediated variables that influence child feeding practices through the social contexts in which behaviors take place. This paper presents the design and implementation of a qualitative study examining low-income, Latina mothers' perceptions of child weight status and feeding practices, and their associations with the development of overweight in children. Guided by the social ecologic model and social contextual model on the role of the family in mediating health behavior, the Latina Mother Child Feeding Practices (LMCFP) study provided a systematic exploration of the influence of social class, culture, and environmental factors associated with mothers' perceptions of child overweight on feeding practices and behaviors. The design for this qualitative study consisted of three sequential phases: focus groups, in-depth interviews and cognitive interviews with Latina mothers conducted by Spanish-speaking researchers. Results showed the important role of socio-cultural factors in influencing Latina mothers' child feeding practices. In the short-term, this research yielded information to develop a child-feeding questionnaire appropriate for low-income, Latina mothers. Findings have important implications in developing nutrition education strategies for child health promotion that account for the social and cultural context of minority, low-income caregivers.

Cortical depth dependent population receptive field attraction by spatial attention in human V1.

PubMed

Klein, Barrie P; Fracasso, Alessio; van Dijk, Jelle A; Paffen, Chris L E; Te Pas, Susan F; Dumoulin, Serge O

2018-04-27

Visual spatial attention concentrates neural resources at the attended location. Recently, we demonstrated that voluntary spatial attention attracts population receptive fields (pRFs) toward its location throughout the visual hierarchy. Theoretically, both a feed forward or feedback mechanism could underlie pRF attraction in a given cortical area. Here, we use sub-millimeter ultra-high field functional MRI to measure pRF attraction across cortical depth and assess the contribution of feed forward and feedback signals to pRF attraction. In line with previous findings, we find consistent attraction of pRFs with voluntary spatial attention in V1. When assessed as a function of cortical depth, we find pRF attraction in every cortical portion (deep, center and superficial), although the attraction is strongest in deep cortical portions (near the gray-white matter boundary). Following the organization of feed forward and feedback processing across V1, we speculate that a mixture of feed forward and feedback processing underlies pRF attraction in V1. Specifically, we propose that feedback processing contributes to the pRF attraction in deep cortical portions. Copyright © 2018. Published by Elsevier Inc.

The biological pump: Profiles of plankton production and consumption in the upper ocean

NASA Astrophysics Data System (ADS)

Longhurst, Alan R.; Glen Harrison, W.

The ‘biological pump’ mediates flux of carbon to the interior of the ocean by interctions between the components of the vertically-structured pelagic ecosystem of the photic zone. Chlorophyll profiles are not a simple indicator of autotrophic biomass or production, because of non-linearities in the physiology of cells and preferential vertical distribution of taxa. Profiles of numbers or biomass of heterotrophs do not correspond with profiles of consumption, because of depth-selection (taxa, seasons) for reasons unconnected with feeding. Depths of highest plant biomass, chlorophyll and growth rate coincide when these depths are shallow, but become progressively separated in profiles where they are deeper - so that highest growth rate lies progressively shallower than the chloropyll maximum. It is still uncertain how plant biomass is distributed in deep profiles. Depths of greatest heterotroph biomass (mesozooplankton) are usually close to depths of fastest plant growth rate, and thus lie shallower than the chlorophyll maximum in profiles where this itself is deep. This correlation is functional, and relates to the role of heterotrophs in excreting metabolic wastes (especially ammonia), which may fuel a significant component of integrated algal production, especially in the oligotrophic ocean. Some, but not all faecal material from mesozooplankton of the photic zone appears in vertical flux below the pycnocine, depending on the size of the source organisms, and the degree of vertical mixing above the pycnocline. Diel, but probably not seasonal, vertical migration is significant in the vertical flux of dissolved nitrogen. Regional generalisations of the vertical relations of the main components of the ‘biological pump’ now appear within reach, and an approach is suggested.

The study of optimization on process parameters of high-accuracy computerized numerical control polishing

NASA Astrophysics Data System (ADS)

Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

2017-09-01

Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

Complex depth-related patterns in taxonomic and functional diversity of polychaetes in the Gulf of Mexico

NASA Astrophysics Data System (ADS)

Carvalho, Russell; Wei, Chih-Lin; Rowe, Gilbert; Schulze, Anja

2013-10-01

Patterns of taxonomic and functional diversity in polychaete assemblages were examined in the deep northern Gulf of Mexico, including the first analysis of polychaete feeding guild distribution. An analysis of samples from a total of 51 stations located along 7 transects plus additional nearby sites, indicated that density decreased exponentially with depth, with the central locations having higher densities than the eastern and western regions. Alpha diversity was also highest at the central stations associated with the Mississippi trough. The samples can be grouped into three significant clusters based on thirty percent similarity of species composition. BIO-ENV indicated depth, sediment particle size, and export POC were most important variables explaining distributions. The diversity of polychaete feeding guilds was high in the Mississippi trough, upper and mid-slope regions but declined to a few guilds on the Sigsbee abyssal plain. Combining feeding guild analysis with traditional analysis of species diversity contributes to a clearer understanding of trophic diversity in deep-sea benthic assemblages.

Using grounded theory methodology to conceptualize the mother-infant communication dynamic: potential application to compliance with infant feeding recommendations.

PubMed

Waller, Jennifer; Bower, Katherine M; Spence, Marsha; Kavanagh, Katherine F

2015-10-01

Excessive, rapid weight gain in early infancy has been linked to risk of later overweight and obesity. Inappropriate infant feeding practices associated with this rapid weight gain are currently of great interest. Understanding the origin of these practices may increase the effectiveness of interventions. Low-income populations in the Southeastern United States are at increased risk for development of inappropriate infant feeding practices, secondary to the relatively low rates of breastfeeding reported from this region. The objective was to use grounded theory methodology (GTM) to explore interactions between mothers and infants that may influence development of feeding practices, and to do so among low-income, primiparous, Southeastern United States mothers. Analysis of 15 in-depth phone interviews resulted in development of a theoretical model in which Mother-Infant Communication Dynamic emerged as the central concept. The central concept suggests a communication pattern developed over the first year of life, based on a positive feedback loop, which is harmonious and results in the maternal perception of mother and infant now speaking the same language. Importantly, though harmonious, this dynamic may result from inaccurate maternal interpretation of infant cues and behaviours, subsequently leading to inappropriate infant feeding practices. Future research should test this theoretical model using direct observation of mother-infant communication, to increase the understanding of maternal interpretation of infant cues. Subsequently, interventions targeting accurate maternal interpretation of and response to infant cues, and impact on rate of infant weight gain could be tested. If effective, health care providers could potentially use these concepts to attenuate excess rapid infant weight gain. © 2013 John Wiley & Sons Ltd.

Distribution, abundance, and feeding ecology of decapods in the Arabian Sea, with implications for vertical flux

NASA Astrophysics Data System (ADS)

Mincks, Sarah L.; Bollens, Stephen M.; Madin, Laurence P.; Horgan, Erich; Butler, Mari; Kremer, Patricia M.; Craddock, James E.

Macrozooplankton and micronekton samples were collected on two cruises in the Arabian Sea conducted during the Spring Intermonsoon period (May) and the SW Monsoon period (August) of 1995. Discrete depth samples were collected down to depths of 1000-1500 m. Quantitative gut content analyses were performed on four species of decapod shrimps, Gennadas sordidus, Sergia filictum, Sergia creber, and Eupasiphae gilesii, as well as on the pelagic crab Charybdis smithii. Of the shrimps, only S. filictum and S. creber increased significantly in abundance between the Spring Intermonsoon and SW Monsoon seasons. These four species were found at all depths sampled, and most did not appear to be strong vertical migrators. G. sordidus and S. filictum did appear to spread upward at night, especially during the SW Monsoon, but this movement did not include the entire population. S. creber showed signs of diel vertical migration only in some areas. All four shrimp species except, to some degree, S. creber lived almost exclusively within the oxygen minimum zone (150-1000 m), and are likely to have respiratory adaptations that allow them to persist under such conditions. Feeding occurred at all depths throughout these species' ranges, but only modest feeding occurred in the surface layer (0-150 m). G. sordidus appeared to feed continuously throughout the day and night. Estimated contribution of fecal material to vertical flux ranged from <0.01-2.1% of particulate flux at 1000 m for the shrimps and 1.8-3.0% for C. smithii.

Experimental investigation of the tip based micro/nano machining

NASA Astrophysics Data System (ADS)

Guo, Z.; Tian, Y.; Liu, X.; Wang, F.; Zhou, C.; Zhang, D.

2017-12-01

Based on the self-developed three dimensional micro/nano machining system, the effects of machining parameters and sample material on micro/nano machining are investigated. The micro/nano machining system is mainly composed of the probe system and micro/nano positioning stage. The former is applied to control the normal load and the latter is utilized to realize high precision motion in the xy plane. A sample examination method is firstly introduced to estimate whether the sample is placed horizontally. The machining parameters include scratching direction, speed, cycles, normal load and feed. According to the experimental results, the scratching depth is significantly affected by the normal load in all four defined scratching directions but is rarely influenced by the scratching speed. The increase of scratching cycle number can increase the scratching depth as well as smooth the groove wall. In addition, the scratching tests of silicon and copper attest that the harder material is easier to be removed. In the scratching with different feed amount, the machining results indicate that the machined depth increases as the feed reduces. Further, a cubic polynomial is used to fit the experimental results to predict the scratching depth. With the selected machining parameters of scratching direction d3/d4, scratching speed 5 μm/s and feed 0.06 μm, some more micro structures including stair, sinusoidal groove, Chinese character '田', 'TJU' and Chinese panda have been fabricated on the silicon substrate.

Hypoxia Impacts on Food Web Linkages in a Pelagic Ecosystem

NASA Astrophysics Data System (ADS)

Sato, M.; Horne, J. K.; Parker-Stetter, S. L.; Essington, T.; Keister, J. E.; Moriarty, P.; Li, L.

2016-02-01

Low dissolved oxygen (DO), or hypoxia, causes significant disturbances on aquatic organisms, but the consequences for key food web linkages is not well understood. Here, we tested how the intensity of low DO events governs the degree of spatial overlap between pelagic zooplanktivorous fish and their zooplankton prey, fish feeding rates, and community compositions of zooplankton. We hypothesized that the greater sensitivity of fish to DO compared to zooplankton would lead to diminished spatial overlap at moderate DO and reduced feeding rates of fish, while severe hypoxia would amplify spatial overlap by preventing zooplankton from using deep refuge habitats leading to increased fish feeding rates. We also hypothesized shifts in zooplankton community composition towards less energetically profitable taxa such as small copepods and gelatinous species. We used a combination of multifrequency acoustic and net sampling for detecting distributions and abundance of zooplankton and pelagic fish in Hood Canal, WA, a seasonally hypoxic fjord. We employed a sampling design which paired hypoxic regions of Hood Canal with normoxic regions sampled prior to, during, and after the onset of hypoxia in two years. Contrary to our hypotheses, we found that fish and zooplankton did not change their horizontal and vertical distributions during periods and in locations with low DO levels. Consequently, the vertical overlap between fish and zooplankton did not change with DO. Fish feeding rates and the dominant zooplankton prey did not change with hypoxia events. The apparent resilience of fish to low DO in our system may be explained by decreased metabolic oxygen demand due to cool temperatures, increased availability and accessibility to their prey in low DO waters, or potential increase in predation risk at shallower depth. This study highlights the importance of both temperature and DO, instead of hypoxia threshold alone, in evaluating the impacts of hypoxia on pelagic communities.

Understanding the context for pet cat and dog feeding and exercising behaviour among pet owners in Ireland: a qualitative study.

PubMed

Downes, Martin J; Devitt, Catherine; Downes, Marie T; More, Simon J

2017-01-01

Pet cat and dog obesity contributes to increased risk of several diseases, including cancer and diabetes mellitus as well as a worsening of orthopaedic problems, and a reduction in survival rate. This study aims to develop a better understanding of cat and dog owners' self-reported beliefs and factors that influence owner behaviour around feeding and exercising their pet cat or dog, as there is a lack of in-depth understanding in this area. Seven focus group discussions, with 43 pet owners in total, were conducted. Pet owners often reported a perceived a low level of control over feeding; often undermined by other people feeding of their pet, their pets begging for food, and their pets attitude towards food. Treats were used in the absence of owner control over pet begging and emotional attachment, and to influence pet behaviour. The majority of participants had positive attitudes to pet exercise, which could be related to pet specific requirements, especially differences in cats and dogs. There were some negative experiences of stress associated with dog walking and fears over aggressive confrontations with other dogs. Feeding one's pet is influenced by beliefs about pet specific needs, pet food and pet health, pet owners' perceived control over feeding, and the implications for the pet owner. Pet exercise is influenced by beliefs about pet specific exercise needs, and the implications of exercising one's pet for the pet owner. Understanding owner behaviours on feeding and exercise allows for a more targeted approach to preventing and treating pet obesity.

The effect of environmentally induced changes in the bark of young conifers on feeding behaviour and reproductive development of adult Hylobius abietis (Coleoptera: Curculionidae).

PubMed

Wainhouse, D; Staley, J; Johnston, J; Boswell, R

2005-04-01

Young plants of Sitka spruce, Scots and Corsican pine were subject to high and low light, and high and low nitrogen treatments in a polyhouse experiment. The effect of treatments on resin duct size and nitrogen concentration in stem bark was determined together with feeding by Hylobius abietis Linnaeus on the stems of 'intact' plants and on 'detached' stems cut from the plant. Resin duct size was largest on Corsican pine and smallest on Sitka spruce and inherent variation in duct size between the three conifer species appears to determine the pattern of weevil feeding between species. Resin ducts and the flow of resin from them protect the stems of young conifers from weevil feeding not by affecting the total amount of bark eaten but by limiting the depth of feeding and so protecting the inner phloem and cambium. Shallow feeding may increase the likelihood of effective wound repair. Duct size was positively related to plant growth and in particular increased with bark thickness. Overall, ducts were largest in the high light treatment although species differed in their response to the treatment. It is suggested that the effects of plant size, growing conditions and transplantation on susceptibility to attack by H. abietis, reported in various studies, may be due to underlying variation in resin duct size or flow rate. The effect on weevils of superficial feeding on stems is to increase the time for reproductive maturation by reducing consumption of the inner bark which has a higher nitrogen content.

Multi Response Optimization of Process Parameters Using Grey Relational Analysis for Turning of Al-6061

NASA Astrophysics Data System (ADS)

Deepak, Doreswamy; Beedu, Rajendra

2017-08-01

Al-6061 is one among the most useful material used in manufacturing of products. The major qualities of Aluminium are reasonably good strength, corrosion resistance and thermal conductivity. These qualities have made it a suitable material for various applications. While manufacturing these products, companies strive for reducing the production cost by increasing Material Removal Rate (MRR). Meanwhile, the quality of surface need to be ensured at an acceptable value. This paper aims at bringing a compromise between high MRR and low surface roughness requirement by applying Grey Relational Analysis (GRA). This article presents the selection of controllable parameters like longitudinal feed, cutting speed and depth of cut to arrive at optimum values of MRR and surface roughness (Ra). The process parameters for experiments were selected based on Taguchi’s L9 array with two replications. Grey relation analysis being most suited method for multi response optimization, the same is adopted for the optimization. The result shows that feed rate is the most significant factor that influences MRR and Surface finish.

Machinability Study on Milling Kenaf Fiber Reinforced Plastic Composite Materials using Design of Experiments

NASA Astrophysics Data System (ADS)

Azmi, H.; Haron, C. H. C.; Ghani, J. A.; Suhaily, M.; Yuzairi, A. R.

2018-04-01

The surface roughness (Ra) and delamination factor (Fd) of a milled kenaf reinforced plastic composite materials are depending on the milling parameters (spindle speed, feed rate and depth of cut). Therefore, a study was carried out to investigate the relationship between the milling parameters and their effects on a kenaf reinforced plastic composite materials. The composite panels were fabricated using vacuum assisted resin transfer moulding (VARTM) method. A full factorial design of experiments was use as an initial step to screen the significance of the parameters on the defects using Analysis of Variance (ANOVA). If the curvature of the collected data shows significant, Response Surface Methodology (RSM) is then applied for obtaining a quadratic modelling equation that has more reliable in expressing the optimization. Thus, the objective of this research is obtaining an optimum setting of milling parameters and modelling equations to minimize the surface roughness (Ra) and delamination factor (Fd) of milled kenaf reinforced plastic composite materials. The spindle speed and feed rate contributed the most in affecting the surface roughness and the delamination factor of the kenaf composite materials.

Gray whale and walrus feeding excavation on the Bering Shelf, Alaska.

USGS Publications Warehouse

Nelson, C.H.; Johnson, K.R.; Barber, J.H.

1987-01-01

The gray whales (average mouth length, 2.0 m), when suction feeding on infaunal amphipods, create shallow pits in the sea floor, typically 2.5m x 1.5m x 10cm deep, which are distinct and mappable on sidescan sonographs. Similarly, walrus, when foraging for shallow clams, create long, linear feeding furrows that average 47 x 0.4 x 0.1m (length-width-depth). The whale feeding pits are commonly enlarged and oriented by seasonal storm-related scour. Walrus-feeding features are smaller, formed in higher-energy environments, and modified more rapidly than whale-feeding pits. -from Authors

The use of cutting temperature to evaluate the machinability of titanium alloys.

PubMed

Kikuchi, Masafumi

2009-02-01

This study investigated the machinability of titanium, two commercial titanium alloys (Ti-6Al-4V and Ti-6Al-7Nb) and free-cutting brass using the cutting temperature. The cutting temperature was estimated by measuring the thermal electromotive force of the tool-workpiece thermocouple during cutting. The thermoelectric power of each metal relative to the tool had previously been determined. The metals were slotted using a milling machine and carbide square end mills under four cutting conditions. The cutting temperatures of Ti-6Al-4V and Ti-6Al-7Nb were significantly higher than that of the titanium, while that of the free-cutting brass was lower. This result coincided with the relationship of the magnitude of the cutting forces measured in a previous study. For each metal, the cutting temperature became higher when the depth of cut or the cutting speed and feed increased. The increase in the cutting speed and feed was more influential on the value than the increase in the depth of cut when two cutting conditions with the same removal rates were compared. The results demonstrated that cutting temperature measurement can be utilized to develop a new material for dental CAD/CAM applications and to optimize the cutting conditions.

A model of the evolution of larval feeding rate in Drosophila driven by conflicting energy demands.

PubMed

Mueller, Laurence D; Barter, Thomas T

2015-02-01

Energy allocation is believed to drive trade-offs in life history evolution. We develop a physiological and genetic model of energy allocation that drives evolution of feeding rate in a well-studied model system. In a variety of stressful environments Drosophila larvae adapt by altering their rate of feeding. Drosophila larvae adapted to high levels of ammonia, urea, and the presence of parasitoids evolve lower feeding rates. Larvae adapted to crowded conditions evolve higher feeding rates. Feeding rates should affect gross food intake, metabolic rates, and efficiency of food utilization. We develop a model of larval net energy intake as a function of feeding rates. We show that when there are toxic compounds in the larval food that require energy for detoxification, larvae can maximize their energy intake by slowing their feeding rates. While the reduction in feeding rates may increase development time and decrease competitive ability, we show that genotypes with lower feeding rates can be favored by natural selection if they have a sufficiently elevated viability in the toxic environment. This work shows how a simple phenotype, larval feeding rates, may be of central importance in adaptation to a wide variety of stressful environments via its role in energy allocation.

Conduit stability effects on intensity and steadiness of explosive eruptions.

PubMed

Aravena, Álvaro; Cioni, Raffaello; de'Michieli Vitturi, Mattia; Neri, Augusto

2018-03-07

Conduit geometry affects magma ascent dynamics and, consequently, the style and evolution of volcanic eruptions. However, despite geological evidences support the occurrence of conduit widening during most volcanic eruptions, the factors controlling conduit enlargement are still unclear, and the effects of syn-eruptive variations of conduit geometry have not been investigated in depth yet. Based on numerical modeling and the application of appropriate stability criteria, we found out a strong relationship between magma rheology and conduit stability, with significant effects on eruptive dynamics. Indeed, in order to be stable, conduits feeding dacitic/rhyolitic eruptions need larger diameters respect to their phonolitic/trachytic counterparts, resulting in the higher eruption rates commonly observed in dacitic/rhyolitic explosive events. Thus, in addition to magma source conditions and viscosity-dependent efficiency for outgassing, we suggest that typical eruption rates for different magma types are also controlled by conduit stability. Results are consistent with a compilation of volcanological data and selected case studies. As stability conditions are not uniform along the conduit, widening is expected to vary in depth, and three axisymmetric geometries with depth-dependent radii were investigated. They are able to produce major modifications in eruptive parameters, suggesting that eruptive dynamics is influenced by syn-eruptive changes in conduit geometry.

Selection of Levels of Dressing Process Parameters by Using TOPSIS Technique for Surface Roughness of En-31 Work piece in CNC Cylindrical Grinding Machine

NASA Astrophysics Data System (ADS)

Patil, Sanjay S.; Bhalerao, Yogesh J.

2017-02-01

Grinding is metal cutting process used for mainly finishing the automobile components. The grinding wheel performance becomes dull by using it most of times. So it should be reshaping for consistent performance. It is necessary to remove dull grains of grinding wheel which is known as dressing process. The surface finish produced on the work piece is dependent on the dressing parameters in sub-sequent grinding operation. Multi-point diamond dresser has four important parameters such as the dressing cross feed rate, dressing depth of cut, width of the diamond dresser and drag angle of the dresser. The range of cross feed rate level is from 80-100 mm/min, depth of cut varies from 10 - 30 micron, width of diamond dresser is from 0.8 - 1.10mm and drag angle is from 40o - 500, The relative closeness to ideal levels of dressing parameters are found for surface finish produced on the En-31 work piece during sub-sequent grinding operation by using Technique of Order Preference by Similarity to Ideal Solution (TOPSIS).In the present work, closeness to ideal solution i.e. levels of dressing parameters are found for Computer Numerical Control (CNC) cylindrical angular grinding machine. After the TOPSIS technique, it is found that the value of Level I is 0.9738 which gives better surface finish on the En-31 work piece in sub-sequent grinding operation which helps the user to select the correct levels (combinations) of dressing parameters.

Flocculation increases the efficacy of depth filtration during the downstream processing of recombinant pharmaceutical proteins produced in tobacco.

PubMed

Buyel, Johannes F; Fischer, Rainer

2014-02-01

Flocculation is a cost-effective method that is used to improve the efficiency of clarification by causing dispersed particles to clump together, allowing their removal by sedimentation, centrifugation or filtration. The efficacy of flocculation for any given process depends on the nature and concentration of the particulates in the feed stream, the concentration, charge density and length of the flocculant polymer, the shear rate, the properties of the feed stream (e.g. pH and ionic strength) and the properties of the target products. We tested a range of flocculants and process conditions using a design of experiments approach to identify the most suitable polymers for the clarification step during the production of a HIV-neutralizing monoclonal antibody (2G12) and a fluorescent marker protein (DsRed) expressed in transgenic tobacco leaves. Among the 23 different flocculants we tested, the greatest reduction in turbidity was achieved with Polymin P, a branched, cationic polyethylenimine with a charge density of 13.0 meq/g. This flocculant reduced turbidity by more than 90% under a wide range of process conditions. We developed a model that predicted its performance under different process conditions, and this enabled us to increase the depth filter capacity three-sevenfold depending on the process scale, depth filter type and plant species. The costs of filter consumables were reduced by more than 50% compared with a process without flocculant, and there was no loss of recovery for either 2G12 or DsRed. © 2013 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

Performance efficiency of feed utilization, relative growth rate, and survival rate of common carp (Cyprinus carpio) through the addition of phytase in the feed

NASA Astrophysics Data System (ADS)

Rachmawati, D.; Samidjan, I.

2018-04-01

The purpose of this study was to determine the effect of adding phytase enzyme in the feed on digestibility of feed, efficiency of feed utilization, relative growth rate and survival rate of Common carp (Cyprinus carpio). Fish samples in this research were Common carp with an average - weight of 3.34 ± 0,16 g/fish. The treatments were adding the phytase enzyme in the feed with the different level of doses. Those were A (0 U kg-1 feed), B (500 U kg-1 feed), C (1.000 U kg-1 feed g) and D (1.500 U kg-1 feed). Observation was conducted on digestibility of protein (ADCP), digestibility of phosphor (ADCF), efficiency of feed utilization (EFU), relative growth rate (RGR), protein efficiency ratio (PER), feed conversion ratio (FCR), survival rate (SR) and water quality parameters. The results show that the addition of phytase enzyme significantly (P<0.01) affected on ADCP, ADCF, EFU, RGR, FCR, and PER, on the other hand it insignificantly (P>0.05) affected on SR of common carp. Based on results, it was concluded that optimum doses of phytase enzyme feed in terms of digestibility of feed, efficiency utilization of Feed and growth rate of Common carp ranges from 943 to 1100 U kg-1 feed

Machining process influence on the chip form and surface roughness by neuro-fuzzy technique

NASA Astrophysics Data System (ADS)

Anicic, Obrad; Jović, Srđan; Aksić, Danilo; Skulić, Aleksandar; Nedić, Bogdan

2017-04-01

The main aim of the study was to analyze the influence of six machining parameters on the chip shape formation and surface roughness as well during turning of Steel 30CrNiMo8. Three components of cutting forces were used as inputs together with cutting speed, feed rate, and depth of cut. It is crucial for the engineers to use optimal machining parameters to get the best results or to high control of the machining process. Therefore, there is need to find the machining parameters for the optimal procedure of the machining process. Adaptive neuro-fuzzy inference system (ANFIS) was used to estimate the inputs influence on the chip shape formation and surface roughness. According to the results, the cutting force in direction of the depth of cut has the highest influence on the chip form. The testing error for the cutting force in direction of the depth of cut has testing error 0.2562. This cutting force determines the depth of cut. According to the results, the depth of cut has the highest influence on the surface roughness. Also the depth of cut has the highest influence on the surface roughness. The testing error for the cutting force in direction of the depth of cut has testing error 5.2753. Generally the depth of cut and the cutting force which provides the depth of cut are the most dominant factors for chip forms and surface roughness. Any small changes in depth of cut or in cutting force which provide the depth of cut could drastically affect the chip form or surface roughness of the working material.

Limits to benthic feeding by eiders in a vital Arctic migration corridor due to localized prey and changing sea ice

USGS Publications Warehouse

Lovvorn, James R.; Rocha, Aariel R.; Jewett, Stephen C.; Dasher, Douglas; Oppel, Steffen; Powell, Abby

2015-01-01

Four species of threatened or declining eider ducks that nest in the Arctic migrate through the northeast Chukchi Sea, where anticipated industrial development may require prioritizing areas for conservation. In this nearshore corridor (10–40 m depth), the eiders’ access to benthic prey during the spring is restricted to variable areas of open water within sea ice. For the most abundant species, the king eider (Somateria spectabilis), stable isotopes in blood cells, muscle, and potential prey indicate that these eiders ate mainly bivalves when traversing this corridor. Bivalves there were much smaller than the same taxa in deeper areas of the northern Bering Sea, possibly due to higher mortality rates caused by ice scour in shallow water; future decrease in seasonal duration of fast ice may increase this effect. Computer simulations suggested that if these eiders forage for >15 h/day, they can feed profitably at bivalve densities >200 m−2 regardless of water depth or availability of ice for resting. Sampling in 2010–2012 showed that large areas of profitable prey densities occurred only in certain locations throughout the migration corridor. Satellite data in April–May over 13 years (2001–2013) indicated that access to major feeding areas through sea ice in different segments of the corridor can vary from 0% to 100% between months and years. In a warming and increasingly variable climate, unpredictability of access may be enhanced by greater effects of shifting winds on unconsolidated ice. Our results indicate the importance of having a range of potential feeding areas throughout the migration corridor to ensure prey availability in all years. Spatial planning of nearshore industrial development in the Arctic, including commercial shipping, pipeline construction, and the risk of released oil, should consider these effects of high environmental variability on the adequacy of habitats targeted for conservation.

Limits to benthic feeding by eiders in a vital Arctic migration corridor due to localized prey and changing sea ice

NASA Astrophysics Data System (ADS)

Lovvorn, James R.; Rocha, Aariel R.; Jewett, Stephen C.; Dasher, Douglas; Oppel, Steffen; Powell, Abby N.

2015-08-01

Four species of threatened or declining eider ducks that nest in the Arctic migrate through the northeast Chukchi Sea, where anticipated industrial development may require prioritizing areas for conservation. In this nearshore corridor (10-40 m depth), the eiders' access to benthic prey during the spring is restricted to variable areas of open water within sea ice. For the most abundant species, the king eider (Somateria spectabilis), stable isotopes in blood cells, muscle, and potential prey indicate that these eiders ate mainly bivalves when traversing this corridor. Bivalves there were much smaller than the same taxa in deeper areas of the northern Bering Sea, possibly due to higher mortality rates caused by ice scour in shallow water; future decrease in seasonal duration of fast ice may increase this effect. Computer simulations suggested that if these eiders forage for >15 h/day, they can feed profitably at bivalve densities >200 m-2 regardless of water depth or availability of ice for resting. Sampling in 2010-2012 showed that large areas of profitable prey densities occurred only in certain locations throughout the migration corridor. Satellite data in April-May over 13 years (2001-2013) indicated that access to major feeding areas through sea ice in different segments of the corridor can vary from 0% to 100% between months and years. In a warming and increasingly variable climate, unpredictability of access may be enhanced by greater effects of shifting winds on unconsolidated ice. Our results indicate the importance of having a range of potential feeding areas throughout the migration corridor to ensure prey availability in all years. Spatial planning of nearshore industrial development in the Arctic, including commercial shipping, pipeline construction, and the risk of released oil, should consider these effects of high environmental variability on the adequacy of habitats targeted for conservation.

Improving age-depth models using sedimentary proxies for accumulation rates in fluvio-lacustrine deposits

NASA Astrophysics Data System (ADS)

Minderhoud, Philip S. J.; Cohen, Kim M.; Toonen, Willem. H. J.; Erkens, Gilles; Hoek, Wim Z.

2017-04-01

Lacustrine fills, including those of oxbow lakes in river floodplains, often hold valuable sedimentary and biological proxy records of palaeo-environmental change. Precise dating of accumulated sediments at levels throughout these records is crucial for interpretation and correlation of (proxy) data existing within the fills. Typically, dates are gathered from multiple sampled levels and their results are combined in age-depth models to estimate the ages of events identified between the datings. In this paper, a method of age-depth modelling is presented that varies the vertical accumulation rate of the lake fill based on continuous sedimentary data. In between Bayesian calibrated radiocarbon dates, this produces a modified non-linear age-depth relation based on sedimentology rather than linear or spline interpolation. The method is showcased on a core of an infilled palaeomeander at the floodplain edge of the river Rhine near Rheinberg (Germany). The sequence spans from 4.7 to 2.9 ka cal BP and consists of 5.5 meters of laminated lacustrine, organo-clastic mud, covered by 1 meter of peaty clay. Four radiocarbon dates provide direct dating control, mapping and dating in the wider surroundings provide additional control. The laminated, organo-clastic facies of the oxbow fill contains a record of nearby fluvial-geomorphological activity, including meander reconfiguration events and passage of rare large floods, recognized as fluctuations in coarseness and amount of allochthonous clastic sediment input. Continuous along-core sampling and measurement of loss-on-ignition (LOI) provided a fast way of expressing the variation in clastic sedimentation influx from the nearby river versus autochthonous organic deposition derived from biogenic production in the lake itself. This low-cost sedimentary proxy data feeds into the age-depth modelling. The sedimentology-modelled age-depth relation (re)produces the distinct lithological boundaries in the fill as marked changes in sedimentation rate. Especially the organo-clastic muddy facies subdivides in centennial intervals of relative faster and slower accumulation. For such intervals, sedimentation rates are produced that deviate 10 to 20% from that in simpler stepped linear age-models. For irregularly laminated muddy intervals of the oxbow fill - from which meaningful sampling for radiocarbon dating is more difficult than from peaty or slowly accumulating organic lake sediments - supplementing spotty radiocarbon sampling with continuous sedimentary proxy data creates more realistic age-depth modelling results.

Relationship between body condition of American alligators and water depth in the Everglades, Florida

USGS Publications Warehouse

Fujisaki, Ikuko; Rice, Kenneth G.; Pearlstine, Leonard G.; Mazzotti, Frank J.

2009-01-01

Feeding opportunities of American alligators (Alligator mississippiensis) in freshwater wetlands in south Florida are closely linked to hydrologic conditions. In the Everglades, seasonally and annually fluctuating surface water levels affect populations of aquatic organisms that alligators consume. Since prey becomes more concentrated when water depth decreases, we hypothesized an inverse relationship between body condition and water depth in the Everglades. On average, condition of adult alligators in the dry season was significantly higher than in the wet season, but this was not the case for juveniles/subadults. The correlation between body condition and measured water depth at capture locations was weak; however, there was a significant negative correlation between the condition and predicted water depth prior to capture for all animals except for spring juveniles/subadults which had a weak positive condition-water depth relationship. Overall, a relatively strong inverse correlation occurred at 10-49 days prior to the capture day, suggesting that current body condition of alligators may depend on feeding opportunities during that period. Fitted regression of body condition on water depth (mean depth of 10 days when condition-water depth correlation was greatest) resulted in a significantly negative slope, except for spring adult females and spring juveniles/subadults for which slopes were not significantly different from zero. Our results imply that water management practices may be critical for alligators in the Everglades since water depth can affect animal condition in a relatively short period of time.

The Influence of Hydrologic Conditions on the Distribution of Baleen Whales in the Antarctic (Raspredelenie Usatykh Kitov v Anarktike v Zabisimosti ot Gidrologicheskikh Uslovii),

DTIC Science & Technology

where a semistationary cyclonic system coincides with plankton rich waters upwelling from great depths. Whales locate these feeding grounds through...growth. They also travel parallel to isohalines to remain in the feeding grounds. (Author)

Feeding rates affect growth, intestinal digestive and absorptive capabilities and endocrine functions of juvenile blunt snout bream Megalobrama amblycephala.

PubMed

Xu, Chao; Li, Xiang-Fei; Tian, Hong-Yan; Jiang, Guang-Zhen; Liu, Wen-Bin

2016-04-01

This study aimed to investigate the optimal feeding rate for juvenile blunt snout bream (average initial weight 23.74 ± 0.09 g) based on the results on growth performance, intestinal digestive and absorptive capabilities and endocrine functions. A total of 840 fish were randomly distributed into 24 cages and fed a commercial feed at six feeding rates ranging from 2.0 to 7.0% body weight (BW)/day. The results indicated that weight gain rate increased significantly (P < 0.05) as feeding rates increased from 2.0 to 5.0% BW/day, but decreased with the further increasing feeding rates (P > 0.05). Protein efficiency ratio and nitrogen and energy retention all showed a similar trend. However, feed conversion ratio increased significantly (P < 0.05) with increasing feeding rates. Feeding rates have little effects (P > 0.05) on whole-body moisture, ash and protein contents, but significantly (P < 0.05) affect both lipid and energy contents with the highest values both observed in fish fed 4.0% BW/day. In addition, moderate ration sizes (2.0-4.0% BW/day) resulted in the enhanced activities of intestinal enzymes, including lipase, protease, Na(+), K(+)-ATPase, alkaline phosphatase and creatine kinase. Furthermore, the mRNA levels of growth hormone, insulin-like growth factors-I, growth hormone receptor and neuropeptide all increased significantly (P < 0.05) as feeding rates increased from 2.0 to 5.0% and 6.0% BW/day, but decreased significantly (P < 0.05) with the further increase in feeding rates, whereas both leptin and cholecystokinin expressions showed an opposite trend. Based on the broken-line regression analysis of SGR against feeding rates, the optimal feeding rate for juvenile blunt snout bream was estimated to be 4.57% BW/day.

Machining Parameters Optimization using Hybrid Firefly Algorithm and Particle Swarm Optimization

NASA Astrophysics Data System (ADS)

Farahlina Johari, Nur; Zain, Azlan Mohd; Haszlinna Mustaffa, Noorfa; Udin, Amirmudin

2017-09-01

Firefly Algorithm (FA) is a metaheuristic algorithm that is inspired by the flashing behavior of fireflies and the phenomenon of bioluminescent communication and the algorithm is used to optimize the machining parameters (feed rate, depth of cut, and spindle speed) in this research. The algorithm is hybridized with Particle Swarm Optimization (PSO) to discover better solution in exploring the search space. Objective function of previous research is used to optimize the machining parameters in turning operation. The optimal machining cutting parameters estimated by FA that lead to a minimum surface roughness are validated using ANOVA test.

Test and study on mirror quality of ultra-precision diamond turning

NASA Astrophysics Data System (ADS)

Chang, Yanyan; Sun, Tao; Li, Zengqiang; Wu, Baosen

2014-09-01

Using the diamond turning lathe and mono crystalline diamond tool, the aluminum alloy of 2A12 was cut under different cutting parameters including cutting speed, feed rate and depth of cut and the mirror surfaces were made. The surface roughness, micro hardness and residual stress of the mirror surface were tested by the surface profiler, the universal hardness tester and X-stress Robot. The influences of the cutting parameters on the mirror quality were studied. The research results have theoretical and practical significance to the selection of the optimal cutting parameters in ultraprecision diamond turning.

The effect of a non-starch polysaccharide-hydrolysing enzyme (Rovabio® Excel) on feed intake and body condition of sows during lactation and on progeny growth performance.

PubMed

Walsh, M C; Geraert, P A; Maillard, R; Kluess, J; Lawlor, P G

2012-10-01

A total of 200 (Large White × Landrace) sows were used in a 39-day study to evaluate the effects of feeding a non-starch polysaccharide (NSP)-hydrolysing enzyme multicomplex (Rovabio(®) Excel) in conjunction with a high- or reduced nutrient-density diet during lactation on sow body condition, feed intake and progeny performance. Eight sows were selected each week for 25 weeks, blocked by parity and BW into groups of four, and within the block randomly assigned to one of the four treatments (n = 50/treatment). Treatments were: (1) LND: low energy (13.14 MJ of DE/kg), low CP (15%) diet; (2) LND + RE: LND with 50 mg/kg NSP-hydrolysing enzyme; (3) HND: high energy (14.5 MJ of DE/kg), high CP (16.5%) diet; and (4) HND + RE: HND with 50 mg/kg NSP-hydrolysing enzyme. Sows were fed treatment diets from day 109 of gestation until the day of subsequent service. Between weaning and re-service, Rovabio(®) Excel addition to LND diets resulted in an increase in energy intake; however, a reduction was observed when supplemented to the HND diet (P < 0.05). The inclusion of Rovabio(®) Excel increased feed and energy intake during week 3 (days 15 to 21) of lactation (P < 0.05). Sows fed diets supplemented with Rovabio(®) Excel had greater back-fat depth at weaning and service (P < 0.05); however, the magnitude of change in back-fat depth during lactation and from farrowing to service was not different between treatments. Feeding the HND diet increased energy intake before farrowing, throughout lactation and during the weaning to service interval (P < 0.01); however, overall, average daily feed intake tended to be reduced (P < 0.10). At service, sows fed the HND diet were heavier than sows fed the LND diet (P < 0.05); however, the magnitude of change in BW between treatments was not different. Feeding the HND diet to sows resulted in a tendency for heavier piglets at birth (P = 0.10) that tended to grow at a faster rate and be heavier at weaning than piglets from sows fed the LND diet (P = 0.06). These results indicate that NSP-degrading enzymes offer minimal benefit to sows and their progeny when fed before and during lactation; however, increasing energy intake of sows during lactation may beneficially affect progeny.

Study on the surface constitute properties of high-speed end milling aluminum alloy

NASA Astrophysics Data System (ADS)

Huang, Xiaoming; Li, Hongwei; Yumeng, Ma

2017-09-01

The physical and mechanical properties of the metal surface will change after the metal cutting processing. The comprehensive study of the influence of machining parameters on surface constitute properties are necessary. A high-speed milling experiment by means of orthogonal method with four factors was conducted for aluminum alloy7050-T7451. The surface constitutive properties of the Al-Alloy surface were measured using SSM-B4000TM stress-strain microprobe system. Based on all the load-depth curves obtained, the characteristics parameters such as strain hardening exponent n and yield strength σy of the milling surface are calculated. The effect of cutting speed, feed rate, and width and depth of cut on n and σy was investigated using the ANOVA techniques. The affecting degree of milling parameters on n and σy was v>fz> ap < ae. The influence of milling parameters on n and σ y was described and discussed.

Models for selecting GMA Welding Parameters for Improving Mechanical Properties of Weld Joints

NASA Astrophysics Data System (ADS)

Srinivasa Rao, P.; Ramachandran, Pragash; Jebaraj, S.

2016-02-01

During the process of Gas Metal Arc (GMAW) welding, the weld joints mechanical properties are influenced by the welding parameters such as welding current and arc voltage. These parameters directly will influence the quality of the weld in terms of mechanical properties. Even small variation in any of the cited parameters may have an important effect on depth of penetration and on joint strength. In this study, S45C Constructional Steel is taken as the base metal to be tested using the parameters wire feed rate, voltage and type of shielding gas. Physical properties considered in the present study are tensile strength and hardness. The testing of weld specimen is carried out as per ASTM Standards. Mathematical models to predict the tensile strength and depth of penetration of weld joint have been developed by regression analysis using the experimental results.

The Tool Life of Ball Nose end Mill Depending on the Different Types of Ramping

NASA Astrophysics Data System (ADS)

Vopát, Tomáš; Peterka, Jozef; Kováč, Martin

2014-12-01

The article deals with the cutting tool wear measurement process and tool life of ball nose end mill depending on upward ramping and downward ramping. The aim was to determine and compare the wear (tool life) of ball nose end mill for different types of copy milling operations, as well as to specify particular steps of the measurement process. In addition, we examined and observed cutter contact areas of ball nose end mill with machined material. For tool life test, DMG DMU 85 monoBLOCK 5-axis CNC milling machine was used. In the experiment, cutting speed, feed rate, axial depth of cut and radial depth of cut were not changed. The cutting tool wear was measured on Zoller Genius 3s universal measuring machine. The results show different tool life of ball nose end mills depending on the copy milling strategy.

Results and Interpretation of the WFRD ELS Distillation Down-Select Test Data

NASA Technical Reports Server (NTRS)

Delzeit, Lance Dean; Flynn, Michael; Carter, Layne; Long, David A.

2010-01-01

Testing of the Wiped-film Rotating-disk (WFRD) evaporator was conducted in support of the Exploration Life Support Distillation Down-Select Test. The WFRD was constructed at NASA Ames Research Center (ARC) and tested at NASA Marshall Space Flight Center (MSFC). The WFRD was delivered to MSFC in September 2009, and testing of solution #1 and solution #2 immediately following. Solution #1 was composed of humidity condensate and urine, including flush water and pretreatment chemicals. Solution #2 was composed of hygiene water, humidity condensate, and urine, including flush water and pretreatment chemicals. During the testing, the operational parameters of the WFRD were recorded and samples of the feed, brine, and product were collected and analyzed. The steady-state results of processing 414L of feed solution #1 and 1283L of feed solution #2 demonstrated that running the WFRD at a brine temperature of 50 C gave an average production rate of 16.7 L/hr. The specific energy consumption was 80.5W-hr/L. Data Analysis shows that the water recovery rates were 94% and 91%, respectively. The total mass of the WFRD as delivered to MSFC was 300 Kg. The volume of the tests stand rack was 1m width x 0.7m depth x 1.9m height or 1.5 cu m of which about half of the total volume is occupied by equipment. Chemical analysis of the distillate showed an average TOC of 20ppm, a pH of 3.5, and a conductivity of 98 mho/cm. The conductivity of the distillate, compared to the feed, decreased by 98.9%., the total ion concentration decreased by 99.6%, the total organics decreased 98.6%, and the metals were at or below detection limits

The effect of a self-efficacy-based educational programme on maternal breast feeding self-efficacy, breast feeding duration and exclusive breast feeding rates: A longitudinal study.

PubMed

Chan, Man Yi; Ip, Wan Yim; Choi, Kai Chow

2016-05-01

breast feeding has a number of well-documented benefits. Numerous studies have been conducted to investigate an effective approach to increase the breast feeding rate, duration and exclusive breast feeding rate, in which maternal breast feeding self-efficacy was determined as one of the major contributors. Although numerous breast feeding educational programmes have been developed to enhance maternal breastfeeding self-efficacy, results on the effectiveness of these programmes remain inconclusive. this study aims to investigate the effectiveness of a self-efficacy-based breast feeding educational programme (SEBEP) in enhancing breast feeding self-efficacy, breast feeding duration and exclusive breast feeding rates among mothers in Hong Kong. eligible pregnant women were randomized to attend a 2.5-hour breast feeding workshop at 28-38 weeks of gestation and receive 30-60minutes of telephone counselling at two weeks post partum, whereas both intervention and control groups received usual care. At two weeks postpartum, the Breast feeding Self-Efficacy Scale-Short Form (BSES-SF) and a self-developed post partum questionnaire were completed via telephone interviews. The breast feeding duration, pattern of breast feeding and exclusive breast feeding rates were recorded at two weeks, four weeks, eight weeks and six months post partum. results of analyses based on an intention-to-treat (ITT) assumption showed a significant difference (p<0.01) in the change in BSES-SF mean scores between the mothers who received SEBEP and those who did not receive SEBEP at two weeks post partum. The exclusive breast feeding rate was 11.4% for the intervention group and 5.6% for the control group at six months post partum. the findings of this study highlight the feasibility of a major trial to implement breast feeding education targeted at increasing breast feeding self-efficacy and exclusive breast feeding rates in Hong Kong. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of high power ultrasonic vibration on temperature distribution of workpiece in dry creep feed up grinding.

PubMed

Paknejad, Masih; Abdullah, Amir; Azarhoushang, Bahman

2017-11-01

Temperature history and distribution of steel workpiece (X20Cr13) was measured by a high tech infrared camera under ultrasonic assisted dry creep feed up grinding. For this purpose, a special experimental setup was designed and fabricated to vibrate only workpiece along two directions by a high power ultrasonic transducer. In this study, ultrasonic effects with respect to grinding parameters including depth of cut (a e ), feed speed (v w ), and cutting speed (v s ) has been investigated. The results indicate that the ultrasonic vibration has considerable effect on reduction of temperature, depth of thermal damage of workpiece and width of temperature contours. Maximum temperature reduction of 25.91% was reported at condition of v s =15m/s, v w =500mm/min, a e =0.4mm in the presence of ultrasonic vibration. Copyright © 2017 Elsevier B.V. All rights reserved.

Digestive activity and stomach temperature in farmed bluefin tuna Thunnus thynnus measured by acoustic tag.

PubMed

Díez, G; Moreno, G; Galaz, T; Dagorn, L; Murua, J

2017-06-01

Eight farmed Atlantic bluefin tuna Thunnus thynnus were tagged with temperature and depth transmitters inserted in chub mackerels Scomber colias to characterize their digestive activity, feeding physiology and behaviour in captivity. Results obtained in the experiment can be used to optimize daily T. thynnus feeding strategy in farms, reducing the early regurgitation of food and thus the environmental effects of inappropriate feeding practices. © 2017 The Fisheries Society of the British Isles.

Mothers' experience of fathers' support for breast-feeding.

PubMed

Nickerson, Lauren E; Sykes, Abby C; Fung, Teresa T

2012-09-01

To examine mothers' experience of support received from fathers for breast-feeding. We conducted in-depth in-person interviews with women with recent breast-feeding experience. Interview transcripts were analysed by qualitative content analysis. Interviews were designed to explore the mothers' perception of role of fathers in breast-feeding, education on breast-feeding that fathers received and their perception of the fathers' view on breast-feeding. Urban and suburban community. Nineteen women from a metropolitan area in the north-eastern USA. Ten themes emerged, these involved practical and emotional support provided by fathers, especially during times of unexpected breast-feeding challenges. In addition, mothers perceived fathers may benefit from more peer and professional support, lactation consultant service and breast-feeding education. Mothers appreciated the support from fathers for breast-feeding continuation, including encouragement and understanding. These results may be useful for health-care practitioners to promote breast-feeding continuation by supporting fathers in their role in the breast-feeding process.

The enablers and barriers to continue breast milk feeding in women returning to work.

PubMed

Sulaiman, Zaharah; Liamputtong, Pranee; Amir, Lisa H

2016-04-01

To describe the enablers and barriers working women experience in continuing breast milk feeding after they return to work postpartum in urban Malaysia. In Malaysia, urban working women have low rates of breastfeeding and struggle to achieve the recommended 6 months exclusive breastfeeding. A qualitative enquiry based on a phenomenological framework and multiple methods were used to explore women's experiences in depth. Multiple qualitative methods using face-to-face interview and participant diary were used. Data collection took place in urban suburbs around Penang and Klang Valley, Malaysia from March-September 2011. Participants were 40 employed women with infants less than 24 months. Only 11 of the participants worked from home. Based on the women's experiences, we categorized them into three groups: 'Passionate' women with a strong determination and exclusively breastfed for 6 months, 'Ambivalent' women who initiated breastfeeding, but were unable to sustain exclusive breastfeeding after returning to work and 'Equivalent' women who introduced infant formula prior to returning to work. Passion and to a lesser extent intention, influenced women's choice. Women's characteristics played a greater role in their infant feeding outcomes than their work environment. © 2016 John Wiley & Sons Ltd.

Methods and consequences of including feed intake and efficiency in genetic selection for multiple-trait merit.

PubMed

Barwick, Stephen A; Henzell, Anthony L; Walmsley, Brad J; Johnston, David J; Banks, Robert G

2018-05-04

Methods are presented for including feed intake and efficiency in genetic selection for multiple-trait merit when commercial production is from any combination of pasture or concentrates. Consequences for the production system and for individual animals are illustrated with a beef cattle example. Residual feed intake at pasture (RFI-p), residual feed intake in the feedlot (RFI-f), and cow condition score are additional traits of the breeding objective. Feed requirement change is costed in the economic values of other objective traits. Selection responses are examined when feed costs are ignored, partially or fully included in the breeding objective, and when net feed intake (NFI) EBVs are added to the index. When all feed cost was included and NFI EBVs were in the index, selection (with selection intensity, i = 1) increased production system $ net return by 6.0%, $ per unit of product by 5.2%, $ per unit of feed by 6.6%, total product by 0.7% and product per unit of feed by 1.3%. There was little change in production system total feed. When feed cost was ignored, selection decreased production system $ net return, $ per unit of product, and $ per unit of feed. At the individual trait level, when feed was fully included there were increases in weaning weight-direct (0.8 kg), feedlot entry weight (1.4 kg), dressing % (0.04%), carcass meat % (0.36%), carcase fat depth (0.12 mm), carcass marbling score (0.02 score), cow condition score (0.01 score), calving ease-direct (0.97%), calving ease-maternal (0.22%) and cow weaning rate (1.3%), and decreases in weaning weight-maternal (-0.9 kg), RFI-p (-0.09 kg DM/d), RFI-f (-0.11 kg DM/d), sale weight (-1.6 kg) and cow weight (-8.7 kg). Gains were evident over a range of feed price. Selection for $ net return also increased $ net return per unit of feed, suggesting that $ net return per unit area would increase in grazing industries. Feed cost for trait change was the source of a major genotype × environment interaction affecting animal rankings. Where industry production environments vary, and feed cost for trait change varies with the environment, we recommend that industry indexes be derived for more than one level of feed cost. Cow condition score did not decline while biological and economic efficiency of the production system and individual animal were improving, suggesting that efficiency can be improved under multiple-trait selection without compromising breeding cow welfare.

Ocean sunfish rewarm at the surface after deep excursions to forage for siphonophores.

PubMed

Nakamura, Itsumi; Goto, Yusuke; Sato, Katsufumi

2015-05-01

Ocean sunfish (Mola mola) were believed to be inactive jellyfish feeders because they are often observed lying motionless at the sea surface. Recent tracking studies revealed that they are actually deep divers, but there has been no evidence of foraging in deep water. Furthermore, the surfacing behaviour of ocean sunfish was thought to be related to behavioural thermoregulation, but there was no record of sunfish body temperature. Evidence of ocean sunfish feeding in deep water was obtained using a combination of an animal-borne accelerometer and camera with a light source. Siphonophores were the most abundant prey items captured by ocean sunfish and were typically located at a depth of 50-200 m where the water temperature was <12 °C. Ocean sunfish were diurnally active, made frequently deep excursions and foraged mainly at 100-200 m depths during the day. Ocean sunfish body temperatures were measured under natural conditions. The body temperatures decreased during deep excursions and recovered during subsequent surfacing periods. Heat-budget models indicated that the whole-body heat-transfer coefficient between sunfish and the surrounding water during warming was 3-7 times greater than that during cooling. These results suggest that the main function of surfacing is the recovery of body temperature, and the fish might be able to increase heat gain from the warm surface water by physiological regulation. The thermal environment of ocean sunfish foraging depths was lower than their thermal preference (c. 16-17 °C). The behavioural and physiological thermoregulation enables the fish to increase foraging time in deep, cold water. Feeding rate during deep excursions was not related to duration or depth of the deep excursions. Cycles of deep foraging and surface warming were explained by a foraging strategy, to maximize foraging time with maintaining body temperature by vertical temperature environment. © 2015 The Authors. Journal of Animal Ecology © 2015 British Ecological Society.

Effects of cutting parameters and machining environments on surface roughness in hard turning using design of experiment

NASA Astrophysics Data System (ADS)

Mia, Mozammel; Bashir, Mahmood Al; Dhar, Nikhil Ranjan

2016-07-01

Hard turning is gradually replacing the time consuming conventional turning process, which is typically followed by grinding, by producing surface quality compatible to grinding. The hard turned surface roughness depends on the cutting parameters, machining environments and tool insert configurations. In this article the variation of the surface roughness of the produced surfaces with the changes in tool insert configuration, use of coolant and different cutting parameters (cutting speed, feed rate) has been investigated. This investigation was performed in machining AISI 1060 steel, hardened to 56 HRC by heat treatment, using coated carbide inserts under two different machining environments. The depth of cut, fluid pressure and material hardness were kept constant. The Design of Experiment (DOE) was performed to determine the number and combination sets of different cutting parameters. A full factorial analysis has been performed to examine the effect of main factors as well as interaction effect of factors on surface roughness. A statistical analysis of variance (ANOVA) was employed to determine the combined effect of cutting parameters, environment and tool configuration. The result of this analysis reveals that environment has the most significant impact on surface roughness followed by feed rate and tool configuration respectively.

Modeling of Heat Transfer and Fluid Flow in the Laser Multilayered Cladding Process

NASA Astrophysics Data System (ADS)

Kong, Fanrong; Kovacevic, Radovan

2010-12-01

The current work examines the heat-and-mass transfer process in the laser multilayered cladding of H13 tool steel powder by numerical modeling and experimental validation. A multiphase transient model is developed to investigate the evolution of the temperature field and flow velocity of the liquid phase in the molten pool. The solid region of the substrate and solidified clad, the liquid region of the melted clad material, and the gas region of the surrounding air are included. In this model, a level-set method is used to track the free surface motion of the molten pool with the powder material feeding and scanning of the laser beam. An enthalpy-porosity approach is applied to deal with the solidification and melting that occurs in the cladding process. Moreover, the laser heat input and heat losses from the forced convection and heat radiation that occurs on the top surface of the deposited layer are incorporated into the source term of the governing equations. The effects of the laser power, scanning speed, and powder-feed rate on the dilution and height of the multilayered clad are investigated based on the numerical model and experimental measurements. The results show that an increase of the laser power and powder feed rate, or a reduction of the scanning speed, can increase the clad height and directly influence the remelted depth of each layer of deposition. The numerical results have a qualitative agreement with the experimental measurements.

The effects of aquaculture production noise on the growth, condition factor, feed conversion, and survival of rainbow trout, Oncorhynchus mykiss

USGS Publications Warehouse

Davidson, J.; Bebak, J.; Mazik, P.

2009-01-01

Intensive aquaculture systems, particularly recirculating systems, utilize equipment such as aerators, air and water pumps, blowers, and filtration systems that inadvertently increase noise levels in fish culture tanks. Sound levels and frequencies measured within intensive aquaculture systems are within the range of fish hearing, but species-specific effects of aquaculture production noise are not well defined. Field and laboratory studies have shown that fish behavior and physiology can be negatively impacted by intense sound. Therefore, chronic exposure to aquaculture production noise could cause increased stress, reduced growth rates and feed conversion efficiency, and decreased survival. The objective of this study was to provide an in-depth evaluation of the long term effects of aquaculture production noise on the growth, condition factor, feed conversion efficiency, and survival of cultured rainbow trout, Oncorhynchus mykiss. Rainbow trout were cultured in replicated tanks using two sound treatments: 117??dB re 1????Pa RMS which represented sound levels lower than those recorded in an intensive recycle system and 149??dB re 1????Pa RMS, representing sound levels near the upper limits known to occur in recycle systems. To begin the study mean fish weights in the 117 and 149??dB tanks were 40 and 39??g, respectively. After five months of exposure no significant differences were identified between treatments for mean weight, length, specific growth rates, condition factor, feed conversion, or survival (n = 4). Mean final weights for the 117 and 149??dB treatments were 641 ?? 3 and 631 ?? 10??g, respectively. Overall specific growth rates were equal, i.e. 1.84 ?? 0.00 and 1.84 ?? 0.01%/day. Analysis of growth rates of individually tagged rainbow trout indicated that fish from the 149??dB tanks grew slower during the first month of noise exposure (p < 0.05); however, fish acclimated to the noise thereafter. This study further suggests that rainbow trout growth and survival are unlikely to be affected over the long term by noise levels common to intensive aquaculture systems. ?? 2008 Elsevier B.V.

Perspectives of key stakeholders and experts in infant feeding on the implementation of the Australian National Breastfeeding Strategy 2010-2015.

PubMed

Hull, Naomi S; Schubert, Lisa C; Smith, Julie P

2017-03-01

Breastfeeding is widely accepted as an important public health issue for babies and their mothers. Yet, despite this, Australia continues to struggle with reaching global targets for breastfeeding indicators. In 2007, the Best Start Parliamentary Inquiry Report was released and set the stage for the Australian National Breastfeeding Strategy [2010-2015), which was announced in November 2009, with the vision to increase Australia's breastfeeding rates of infants at 6 months of age and beyond. The aim of this research project was to explore the perspectives of key stakeholders in the field of infant feeding in Australia on the implementation of the strategy, barriers and enablers to its successful implementation and actions that were still needed. Using qualitative research methods of in-depth, semi-structured interviews and thematic analysis, this study identifies main themes of these perceptions about the strategy implementation and some recommendations for future strategies and further research. The main themes identified were initial opinions of the strategy as a blueprint for action, the strategy as a driver for action, lessons learned and recommendations for the future. For success in improving implementation of national breastfeeding strategies, it is recommended that Australia establish an independent breastfeeding/infant feeding committee, increase the political prioritisation of issues surrounding infant feeding and strengthen the regulation of the marketing of breastmilk substitutes.

Prediction of surface roughness in turning of Ti-6Al-4V using cutting parameters, forces and tool vibration

NASA Astrophysics Data System (ADS)

Sahu, Neelesh Kumar; Andhare, Atul B.; Andhale, Sandip; Raju Abraham, Roja

2018-04-01

Present work deals with prediction of surface roughness using cutting parameters along with in-process measured cutting force and tool vibration (acceleration) during turning of Ti-6Al-4V with cubic boron nitride (CBN) inserts. Full factorial design is used for design of experiments using cutting speed, feed rate and depth of cut as design variables. Prediction model for surface roughness is developed using response surface methodology with cutting speed, feed rate, depth of cut, resultant cutting force and acceleration as control variables. Analysis of variance (ANOVA) is performed to find out significant terms in the model. Insignificant terms are removed after performing statistical test using backward elimination approach. Effect of each control variables on surface roughness is also studied. Correlation coefficient (R2 pred) of 99.4% shows that model correctly explains the experiment results and it behaves well even when adjustment is made in factors or new factors are added or eliminated. Validation of model is done with five fresh experiments and measured forces and acceleration values. Average absolute error between RSM model and experimental measured surface roughness is found to be 10.2%. Additionally, an artificial neural network model is also developed for prediction of surface roughness. The prediction results of modified regression model are compared with ANN. It is found that RSM model and ANN (average absolute error 7.5%) are predicting roughness with more than 90% accuracy. From the results obtained it is found that including cutting force and vibration for prediction of surface roughness gives better prediction than considering only cutting parameters. Also, ANN gives better prediction over RSM models.

Effects of Process Parameters on Ultrasonic Micro-Hole Drilling in Glass and Ruby

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schorderet, Alain; Deghilage, Emmanuel; Agbeviade, Kossi

2011-05-04

Brittle materials such as ceramics, glasses and oxide single crystals find increasing applications in advanced micro-engineering products. Machining small features in such materials represents a manufacturing challenge. Ultrasonic drilling constitutes a promising technique for realizing simple micro-holes of high diameter-to-depth ratio. The process involves impacting abrasive particles in suspension in a liquid slurry between tool and work piece. Among the process performance criteria, the drilling time (productivity) is one of the most important quantities to evaluate the suitability of the process for industrial applications.This paper summarizes recent results pertaining to the ultrasonic micro-drilling process obtained with a semi-industrial 3-axis machine.more » The workpiece is vibrated at 40 kHz frequency with an amplitude of several micrometers. A voice-coil actuator and a control loop based on the drilling force impose the tool feed. In addition, the tool is rotated at a prescribed speed to improve the drilling speed as well as the hole geometry. Typically, a WC wire serves as tool to bore 200 {mu}m diameter micro-holes of 300 to 1,000 {mu}m depth in glass and ruby. The abrasive slurry contains B4C particles of 1 {mu}m to 5 {mu}m diameter in various concentrations.This paper discusses, on the basis of the experimental results, the influence of several parameters on the drilling time. First, the results show that the control strategy based on the drilling force allows to reach higher feed rates (avoiding tool breakage). Typically, a 8 um/s feed rate is achieved with glass and 0.9 {mu}m/s with ruby. Tool rotation, even for values as low as 50 rpm, increases productivity and improves holes geometry. Drilling with 1 {mu}m and 5 {mu}m B4C particles yields similar productivity results. Our future research will focus on using the presented results to develop a model that can serve to optimize the process for different applications.« less

Orthogonal cutting of cancellous bone with application to the harvesting of bone autograft.

PubMed

Malak, Sharif F F; Anderson, Iain A

2008-07-01

Autogenous bone graft harvesting results in cell death within the graft and trauma at the donor site. The latter can be mitigated by using minimally invasive tools and techniques, while cell morbidity may be reduced by improving cutter design and cutting parameters. We have performed orthogonal cutting experiments on bovine cancellous bone samples, to gain a basic understanding of the cutting mechanism and to determine design guidelines for tooling. Measurements were performed at cutting speeds from 11.2 to 5000 mm/min, with tool rake angles of 23 degrees, 45 degrees and 60 degrees, and depths of cut in the range of 0.1-3.0 mm. Horizontal and vertical cutting forces were measured, and the chip formation process video recorded. Continuous chip formation was observed for rake angles of 45 degrees and 60 degrees , and depths of cut greater than 0.8 mm. Chip formation for depths of cut greater than 1.0 mm was accompanied by bone marrow extruding out of the free surfaces and away from the rake face. Specific cutting energies decreased with increasing rake angle, increasing depth of cut and increasing cutting speed. Our orthogonal cutting experiments showed that a rake angle of 60 degrees and a depth of cut of 1mm, will avoid excessive fragmentation, keep specific cutting energy low and promote bone marrow extrusion, which may be beneficial for cell survival. We demonstrate how drill bit clearance angle and feed rate can be calculated facilitating a 1mm depth of cut.

UK women's experiences of breastfeeding and additional breastfeeding support: a qualitative study of Baby Café services.

PubMed

Fox, Rebekah; McMullen, Sarah; Newburn, Mary

2015-07-07

Whilst 81 % of UK women initiate breastfeeding, there is a steep decline in breastfeeding rates during the early postnatal period, with just 55 % of women breastfeeding at six weeks. 80 % of these women stopped breastfeeding sooner than they intended, with women citing feeding difficulties and lack of adequate support. As part of efforts to increase breastfeeding continuation rates, many public and voluntary organisations offer additional breastfeeding support services, which provide practical support in the early postnatal period and beyond. This paper focuses on the qualitative experiences of UK users of Baby Café services to examine their experiences of breastfeeding and breastfeeding support. The study was based upon in-depth interviews and focus groups with users of eight Baby Café breastfeeding support groups across the UK. Thirty-six interviews and five focus groups were conducted with a total of fifty-one mothers using the service. Interviews and group discussions were analysed using N Vivo software to draw out key themes and discussions. Whilst each mother's infant feeding journey is unique, reflecting her own personal circumstances and experiences, several themes emerged strongly from the data. Many women felt that they had been given unrealistic expectations of breastfeeding by professionals keen to promote the benefits. This left them feeling unprepared when they encountered pain, problems and relentlessness of early infant feeding, leading to feelings of guilt and inadequacy over their feeding decisions. Mothers valued the combination of expert professional and peer support provided by Baby Café services and emphasised the importance of social support from other mothers in enabling them to continue feeding for as long as they wished. The research emphasises the need for realistic rather than idealistic antenatal preparation and the importance of timely and parent-centred breastfeeding support, particularly in the immediate postnatal weeks. The findings suggest that effective social support, combined with reassurance and guidance from skilled practitioners, can help women to overcome difficulties and find confidence in their own abilities to achieve their feeding goals. However, further work is needed to make sure such services are readily accessible to women from all sectors of the community.

Fine Scale Baleen Whale Behavior Observed via Tagging Over Daily Time Scales

DTIC Science & Technology

2012-09-30

right whales and sei whales) and the diel vertical migration behavior of their copepod prey. I hypothesize that (1) right whales track the diel...vertical migration of copepods by feeding near the bottom during the day and at the surface at night, and (2) sei whales are unable to feed on copepods at...depth during the day, and are therefore restricted to feeding on copepods at the surface only. Because copepod diel vertical migration is variable

Fine Scale Baleen Whale Behavior Observed via Tagging Over Daily Time Scales

DTIC Science & Technology

2013-09-30

sei whales) and the diel vertical migration behavior of their copepod prey. I hypothesize that (1) right whales track the diel vertical migration of... copepods by feeding near the bottom during the day and at the surface at night, and (2) sei whales are unable to feed on copepods at depth during the...day, and are therefore restricted to feeding on copepods at the surface only. Because copepod diel vertical migration is variable over time (days to

Experimental investigation into effect of cutting parameters on surface integrity of hardened tool steel

NASA Astrophysics Data System (ADS)

Bashir, K.; Alkali, A. U.; Elmunafi, M. H. S.; Yusof, N. M.

2018-04-01

Recent trend in turning hardened materials have gained popularity because of its immense machinability benefits. However, several machining processes like thermal assisted machining and cryogenic machining have reveal superior machinability benefits over conventional dry turning of hardened materials. Various engineering materials have been studied. However, investigations on AISI O1 tool steel have not been widely reported. In this paper, surface finish and surface integrity dominant when hard turning AISI O1 tool steel is analysed. The study is focused on the performance of wiper coated ceramic tool with respect to surface roughness and surface integrity of hardened tool steel. Hard turned tool steel was machined at varying cutting speed of 100, 155 and 210 m/min and feed rate of 0.05, 0.125 and 0.20mm/rev. The depth of cut of 0.2mm was maintained constant throughout the machining trials. Machining was conducted using dry turning on 200E-axis CNC lathe. The experimental study revealed that the surface finish is relatively superior at higher cutting speed of 210m/min. The surface finish increases when cutting speed increases whereas surface finish is generally better at lower feed rate of 0.05mm/rev. The experimental study conducted have revealed that phenomena such as work piece vibration due to poor or improper mounting on the spindle also contributed to higher surface roughness value of 0.66Ra during turning at 0.2mm/rev. Traces of white layer was observed when viewed with optical microscope which shows evidence of cutting effects on the turned work material at feed rate of 0.2 rev/min

Niche partitioning of feeding microhabitats produces a unique function for herbivorous rabbitfishes (Perciformes, Siganidae) on coral reefs

NASA Astrophysics Data System (ADS)

Fox, R. J.; Bellwood, D. R.

2013-03-01

Niche theory predicts that coexisting species minimise competition by evolving morphological or behavioural specialisations that allow them to spread out along resource axes such as space, diet and temporal activity. These specialisations define how a species interacts with its environment and, by extension, determine its functional role. Here, we examine the feeding niche of three species of coral reef-dwelling rabbitfishes (Siganidae, Siganus). By comparing aspects of their feeding behaviour (bite location, bite rate, foraging distance) with that of representative species from two other abundant herbivorous fish families, the parrotfishes (Labridae, Scarus) and surgeonfishes (Acanthuridae, Acanthurus), we examine whether rabbitfishes have a feeding niche distinct from other members of the herbivore guild. Measurements of the penetration of the fishes' snouts and bodies into reef concavities when feeding revealed that rabbitfish fed to a greater degree from reef crevices and interstices than other herbivores. There was just a 40 % overlap in the penetration-depth niche between rabbitfish and surgeonfish and a 45 % overlap between rabbitfish and parrotfish, compared with the almost complete niche overlap (95 %) recorded for parrotfish and surgeonfish along this spatial niche axis. Aspects of the morphology of rabbitfish which may contribute to this niche segregation include a comparatively longer, narrower snout and narrower head. Our results suggest that sympatric coexistence of rabbitfish and other reef herbivores is facilitated by segregation along a spatial (and potentially dietary) axis. This segregation results in a unique functional role for rabbitfishes among roving herbivores that of "crevice-browser": a group that specifically feeds on crevice-dwelling algal or benthic organisms. This functional trait may have implications for reef ecosystem processes in terms of controlling the successional development of crevice-based algal communities, reducing their potential to trigger macroalgal outbreaks.

Sugeno-Fuzzy Expert System Modeling for Quality Prediction of Non-Contact Machining Process

NASA Astrophysics Data System (ADS)

Sivaraos; Khalim, A. Z.; Salleh, M. S.; Sivakumar, D.; Kadirgama, K.

2018-03-01

Modeling can be categorised into four main domains: prediction, optimisation, estimation and calibration. In this paper, the Takagi-Sugeno-Kang (TSK) fuzzy logic method is examined as a prediction modelling method to investigate the taper quality of laser lathing, which seeks to replace traditional lathe machines with 3D laser lathing in order to achieve the desired cylindrical shape of stock materials. Three design parameters were selected: feed rate, cutting speed and depth of cut. A total of twenty-four experiments were conducted with eight sequential runs and replicated three times. The results were found to be 99% of accuracy rate of the TSK fuzzy predictive model, which suggests that the model is a suitable and practical method for non-linear laser lathing process.

Application of enthalpy model for floating zone silicon crystal growth

NASA Astrophysics Data System (ADS)

Krauze, A.; Bergfelds, K.; Virbulis, J.

2017-09-01

A 2D simplified crystal growth model based on the enthalpy method and coupled with a low-frequency harmonic electromagnetic model is developed to simulate the silicon crystal growth near the external triple point (ETP) and crystal melting on the open melting front of a polycrystalline feed rod in FZ crystal growth systems. Simulations of the crystal growth near the ETP show significant influence of the inhomogeneities of the EM power distribution on the crystal growth rate for a 4 in floating zone (FZ) system. The generated growth rate fluctuations are shown to be larger in the system with higher crystal pull rate. Simulations of crystal melting on the open melting front of the polycrystalline rod show the development of melt-filled grooves at the open melting front surface. The distance between the grooves is shown to grow with the increase of the skin-layer depth in the solid material.

77 FR 14450 - Self-Regulatory Organizations; National Stock Exchange, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

.../publish/cbsxfeeschedule/cbsxfeeschedule.pdf ) and New York Stock Exchange (``NYSE'') Arca Fee Schedule... Book feed. The text of the proposed rule change is available on the Exchange's Web site at http://www... recipients of the Exchange's Depth of Book (``DOB'') feed. Each of the proposed changes is further addressed...

Feeding Behavior of Subadult Sixgill Sharks (Hexanchus griseus) at a Bait Station

PubMed Central

McNeil, Bryan; Lowry, Dayv; Larson, Shawn; Griffing, Denise

2016-01-01

This is the first in-situ study of feeding behaviors exhibited by bluntnose sixgill sharks. Bait was placed beneath the Seattle Aquarium pier situated on the waterfront in Elliott Bay, Puget Sound, Washington at 20m of water depth. Cameras and lights were placed around the bait box to record sixgill shark presence and behavior while feeding. Analysis of feeding behavior revealed that sixgills utilize a bite comparable to many other elasmobranchs and aquatic vertebrates, have the ability to protrude their upper jaw, change their feeding behavior based on the situation, and employ sawing and lateral tearing during manipulation. The versatility of their feeding mechanism and the ability of sixgills to change their capture and food manipulation behaviors may have contributed to the species’ worldwide distribution and evolutionary success. PMID:27243237

Gaps in international nutrition and child feeding guidelines: a look at the nutrition and young child feeding education of Ghanaian nurses.

PubMed

Davis, Jennie N; Brown, Helen; Ramsay, Samantha A

2017-08-01

To examine the nutrition and young child feeding (YCF) education and training of nurses in public health clinics of Ghana's Komenda-Edina-Eguafo-Abrem region (KEEA) in relation to global health guidelines, and how nurses served as educators for caregivers with children aged 0-5 years. A qualitative study of semi-structured one-on-one and group interviews (n 21) following a questionnaire of closed- and open-ended questions addressing child feeding, nutrition and global health recommendations. Interviews were conducted in English, audio-recorded, transcribed and coded. Descriptive data were tabulated. Content analysis identified themes from open-ended questions. KEEA public health clinics (n 12). Nurses (n 41) purposefully recruited from KEEA clinics. A model capturing nurses' nutrition and YCF education emerged with five major themes: (i) adequacy of nurses' basic knowledge in breast-feeding, complementary feeding, iron-deficiency anaemia, YCF and hygiene; (ii) nurses' delivery of nutrition and YCF information; (iii) nurses' evaluation of children's health status to measure education effectiveness; (iv) nurses' perceived barriers of caregivers' ability to implement nutrition and YCF education; and (v) a gap in global health recommendations on YCF practices for children aged 2-5 years. Nurses demonstrated adequate nutrition and YCF knowledge, but reported a lack of in-depth nutrition knowledge and YCF education for children 2-5 years of age, specifically education and knowledge of YCF beyond complementary feeding. To optimize child health outcomes, a greater depth of nutrition and YCF education is needed in international health guidelines.

Vertical migration and nighttime distribution of adult bloaters in Lake Michigan

USGS Publications Warehouse

TeWinkel, Leslie M.; Fleischer, Guy W.

1999-01-01

The vertical migration and nighttime vertical distribution of adult bloaters Coregonus hoyi were investigated during late summer in Lake Michigan using acoustics simultaneously with either midwater or bottom trawling. Bloaters remained on or near bottom during the day. At night, bloaters were distributed throughout 30-65 m of water, depending on bottom depth. Shallowest depths of migration were not related to water temperature or incident light. Maximum distances of migration increased with increasing bottom depth. Nighttime midwater densities ranged from 0.00 to 6.61 fish/1,000 mA? and decreased with increasing bottom depth. Comparisons of length distributions showed that migrating and nonmigrating bloaters did not differ in size. However, at most sites, daytime bottom catches collected a greater proportion of larger individuals compared with nighttime midwater or bottom catches. Mean target strengths by 5-m strata indicated that migrating bloaters did not stratify by size in the water column at night. Overall, patterns in frequency of empty stomachs and mean digestive state of prey indicated that a portion of the bloater population fed in the water column at night. Bloater diet composition indicated both midwater feeding and bottom feeding. In sum, although a portion of the bloater population fed in the water column at night, bloaters were not limited to feeding at this time. This research confirmed that bloaters are opportunistic feeders and did not fully support the previously proposed hypothesis that bloater vertical migration is driven by the vertically migrating macroinvertebrate the opossom shrimp Mysis relicta.

Technique for assessing vegetation-induced moisture flux, with implications for global climate modeling

NASA Technical Reports Server (NTRS)

Macari, Emir Jose

1990-01-01

The time between storms, the duration of storms, and the storm depths are studied in relation to vegetation controls on the disposition of rainfall. It is proposed that understanding the movement of water between the vegetation and soil (including evapotranspiration and infiltration) will be the gateway for modeling atmospheric flux and improving global climate models. The overall objective goal of the proposed research effort is to develop a field/lab methodology which will provide a better understanding of vegetation induced water movement. Water flow initiated from stem flow of wooded slopes feeds soil water pathways, which in turn feed the deeper ground water system and give rise to stream response. This is balanced by more water inputs via throughfall, where it percolates the soil matrix and allows much greater rates of evapotranspiration and atmospheric/soil moisture flux. This research study seeks to gain an understanding of the effect of vegetation on soil moisture, and the effect of this differential wetting on resulting evapotranspiration and atmospheric flux.

Effect of light, prey density, and prey type on the feeding rates of Hemimysis anomala

USGS Publications Warehouse

Halpin, Kathleen E.; Boscarino, Brent T.; Rudstam, Lars G.; Walsh, Mureen G.; Lantry, Brian F.

2013-01-01

Hemimysis anomala is a near-shore mysid native to the Ponto-Caspian region that was discovered to have invaded Great Lakes ecosystems in 2006. We investigated feeding rates and prey preferences of adult and juvenile Hemimysis in laboratory experiments to gain insight on the potential for Hemimysis to disrupt food webs. For both age groups (AGs), we measured feeding rates as a function of prey abundance (Bosmina longirostris as prey), prey type (B. longirostris, Daphnia pulex, and Mesocyclops sp.), and light levels (no light and dim light). Mean feeding rates on Bosmina increased with prey density and reached 23 ind. (2 h)−1 for adults and 17 ind. (2 h)−1 for juveniles. Dim light had little effect on prey selection or feeding rate compared to complete darkness. When feeding rates on alternate prey were compared, both AGs fed at higher rates on Bosmina than Daphnia, but only juveniles fed at significantly higher rates on Bosmina relative to Mesocyclops. No significant differences were observed between feeding rates on Mesocyclops and on Daphnia. Hemimysis feeding rates were on the order of 30–60% of their body weight per day, similar to predatory cladocerans that have been implicated in zooplankton declines in Lakes Huron and Ontario.

Student nurses' attitudes and beliefs about breast-feeding.

PubMed

Cricco-Lizza, Roberta

2006-01-01

This study explored the breast-feeding attitudes and beliefs of students newly enrolled in an urban university baccalaureate nursing program. A qualitative approach was used to conduct in-depth semistructured interviews with 12 students prior to their formal course work in maternal-child nursing. Four themes emerged from the data analysis: 1. Personal experiences are important in the development of breast-feeding attitudes and beliefs. 2. The students generally believed that breast-feeding offered benefits for babies and mothers, but the beliefs were stronger for those who grew up with breast-feeding as the norm. 3. All the students believed that there were barriers to breast-feeding in the United States that they identified as the societal view of the breast, dependence/independence conflicts, and concerns about intimacy. 4. The students identified an educational rather than promotional role for nurses in breast-feeding because of conflicts about personal choice. This study suggests that students need help identifying their attitudes and beliefs about breast-feeding and reflecting how their personal experiences influence breast-feeding promotion.

Surface Roughness Optimization Using Taguchi Method of High Speed End Milling For Hardened Steel D2

NASA Astrophysics Data System (ADS)

Hazza Faizi Al-Hazza, Muataz; Ibrahim, Nur Asmawiyah bt; Adesta, Erry T. Y.; Khan, Ahsan Ali; Abdullah Sidek, Atiah Bt.

2017-03-01

The main challenge for any manufacturer is to achieve higher quality of their final products with maintains minimum machining time. In this research final surface roughness analysed and optimized with maximum 0.3 mm flank wear length. The experiment was investigated the effect of cutting speed, feed rate and depth of cut on the final surface roughness using D2 as a work piece hardened to 52-56 HRC, and coated carbide as cutting tool with higher cutting speed 120-240 mm/min. The experiment has been conducted using L9 design of Taguchi collection. The results have been analysed using JMP software.

Jewish and Celtic attitudes to breast feeding compared.

PubMed

Ineichen, B; Pierce, M; Lawrenson, R

1997-03-01

To examine reasons for the high rate of breast feeding among one UK ethnic group (Jews) and the low rate among Celtic (Scots and Irish) populations. A manual literature search of ethnic variation in breast feeding rates in the UK was conducted over several years. A computerised search yielded 31 additional references. Seven of these were added. Positive Jewish attitudes to breast feeding were underpinned by scriptural references, and rates of breast feeding were found to be especially high among Orthodox samples in the UK and Israel. Low Scottish and Irish rates appear to reflect prudishness, fashion, and possibly poor health. Reasons for falling rates among these populations in the twentieth century were not clear. Health education needs to address cultural attitudes throughout society if effective change is to be introduced, and the overall rate of breast feeding is to be increased.

Micro-feeding and dosing of powders via a small-scale powder pump.

PubMed

Besenhard, M O; Fathollahi, S; Siegmann, E; Slama, E; Faulhammer, E; Khinast, J G

2017-03-15

Robust and accurate powder micro-feeding (<100mg/s) and micro-dosing (<5 mg) are major challenges, especially with regard to regulatory limitations applicable to pharmaceutical development and production. Since known micro-feeders that yield feed rates below 5mg/s use gravimetric feeding principles, feed rates depend primarily on powder properties. In contrast, volumetric powder feeders do not require regular calibration because their feed rates are primarily determined by the feeder's characteristic volume replacement. In this paper, we present a volumetric micro-feeder based on a cylinder piston system (i.e., a powder pump), which allows accurate micro-feeding and feed rates of a few grams per hours even for very fine powders. Our experimental studies addressed the influence of cylinder geometries, the initial conditions of bulk powder, and the piston speeds. Additional computational studies via Discrete Element Method simulations offered a better understanding of the feeding process, its possible limitations and ways to overcome them. The powder pump is a simple yet valuable tool for accurate powder feeding at feed rates of several orders of magnitude. Copyright © 2016 Elsevier B.V. All rights reserved.

The influence of supplemented Curcuma in feed formulation to improve growth rate and feed efficiency of catfish (Clarias sp.)

NASA Astrophysics Data System (ADS)

Ulum, M. M.; Zubaidah, M.; Arief, M.; Prayogo

2018-04-01

Catfish (Clarias sp.) is very potential to be developed as a food fish. The use of the feed additive in feed intended to improve the health, productivity and compliance with animal nutrition. Feed additive is to use ginger are derived from nature.The purpose of this study was to determine the potential increase in feed formulation. The Curcuma effect on growth rate and feed efficiency of catfish (Clarias sp.). The method used experimental methods and design complete random with 4 treatments and 5 replications. The parameters examined in this study aregrowth rate and efficiency feed.The research showed that the ANOVA markedly dissimilar ( P< 0.05 ) against growth rate and efficiency feed catfishes. The average is 0.275 - 0.33 growth and the results efficiency feed catfishes of 60.70 % - 73.10 % and the results obtained temperature water quality around 27-30°C, pH 7-8, and DO 3.09-6.4. Based on this research cultivator of the suggested use flour curcuma as feed additive on formulations feed.

Domestic animal hosts strongly influence human-feeding rates of the Chagas disease vector Triatoma infestans in Argentina.

PubMed

Gürtler, Ricardo E; Cecere, María C; Vázquez-Prokopec, Gonzalo M; Ceballos, Leonardo A; Gurevitz, Juan M; Fernández, María Del Pilar; Kitron, Uriel; Cohen, Joel E

2014-01-01

The host species composition in a household and their relative availability affect the host-feeding choices of blood-sucking insects and parasite transmission risks. We investigated four hypotheses regarding factors that affect blood-feeding rates, proportion of human-fed bugs (human blood index), and daily human-feeding rates of Triatoma infestans, the main vector of Chagas disease. A cross-sectional survey collected triatomines in human sleeping quarters (domiciles) of 49 of 270 rural houses in northwestern Argentina. We developed an improved way of estimating the human-feeding rate of domestic T. infestans populations. We fitted generalized linear mixed-effects models to a global model with six explanatory variables (chicken blood index, dog blood index, bug stage, numbers of human residents, bug abundance, and maximum temperature during the night preceding bug catch) and three response variables (daily blood-feeding rate, human blood index, and daily human-feeding rate). Coefficients were estimated via multimodel inference with model averaging. Median blood-feeding intervals per late-stage bug were 4.1 days, with large variations among households. The main bloodmeal sources were humans (68%), chickens (22%), and dogs (9%). Blood-feeding rates decreased with increases in the chicken blood index. Both the human blood index and daily human-feeding rate decreased substantially with increasing proportions of chicken- or dog-fed bugs, or the presence of chickens indoors. Improved calculations estimated the mean daily human-feeding rate per late-stage bug at 0.231 (95% confidence interval, 0.157-0.305). Based on the changing availability of chickens in domiciles during spring-summer and the much larger infectivity of dogs compared with humans, we infer that the net effects of chickens in the presence of transmission-competent hosts may be more adequately described by zoopotentiation than by zooprophylaxis. Domestic animals in domiciles profoundly affect the host-feeding choices, human-vector contact rates and parasite transmission predicted by a model based on these estimates.

78 FR 6373 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-30

... Change Relating to Fees for EdgeBook Attributed\\SM\\ January 23, 2013. Pursuant to Section 19(b)(1) of the... external distribution of EdgeBook Attributed\\SM\\, the Exchange's attributed book feed, and (ii) offer a new... SR-EDGX-2011-18,\\4\\ the Exchange made available the EDGX Book Feed (``EdgeBook Depth X\\SM\\'') to...

78 FR 6394 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-30

... Change Relating to Fees for EdgeBook Attributed\\SM\\ January 23, 2012. Pursuant to Section 19(b)(1) of the... external distribution of EdgeBook Attributed\\SM\\, the Exchange's attributed book feed, and (ii) offer a new...-2011-19,\\4\\ the Exchange made available the EDGA Book Feed (``EdgeBook Depth A\\SM\\'') to Members and...

Nondimensional parameter for conformal grinding: combining machine and process parameters

NASA Astrophysics Data System (ADS)

Funkenbusch, Paul D.; Takahashi, Toshio; Gracewski, Sheryl M.; Ruckman, Jeffrey L.

1999-11-01

Conformal grinding of optical materials with CNC (Computer Numerical Control) machining equipment can be used to achieve precise control over complex part configurations. However complications can arise due to the need to fabricate complex geometrical shapes at reasonable production rates. For example high machine stiffness is essential, but the need to grind 'inside' small or highly concave surfaces may require use of tooling with less than ideal stiffness characteristics. If grinding generates loads sufficient for significant tool deflection, the programmed removal depth will not be achieved. Moreover since grinding load is a function of the volumetric removal rate the amount of load deflection can vary with location on the part, potentially producing complex figure errors. In addition to machine/tool stiffness and removal rate, load generation is a function of the process parameters. For example by reducing the feed rate of the tool into the part, both the load and resultant deflection/removal error can be decreased. However this must be balanced against the need for part through put. In this paper a simple model which permits combination of machine stiffness and process parameters into a single non-dimensional parameter is adapted for a conformal grinding geometry. Errors in removal can be minimized by maintaining this parameter above a critical value. Moreover, since the value of this parameter depends on the local part geometry, it can be used to optimize process settings during grinding. For example it may be used to guide adjustment of the feed rate as a function of location on the part to eliminate figure errors while minimizing the total grinding time required.

Fathers and breast feeding very-low-birthweight preterm babies.

PubMed

Sweet, Linda; Darbyshire, Philip

2009-10-01

to explore fathers' experiences of the breast feeding of their very-low-birthweight preterm babies from birth to 12 months of age. a qualitative study using interpretive phenomenology. Data were collected via longitudinal in-depth individual interviews. publicly funded tertiary level hospital, Australia. a purposive sample of 17 Australian parents took part in the broader study. This paper reports on data from the seven participant fathers. this paper explores the discursive changes in fathers' accounts of their perspectives on and support of the breast feeding of their preterm baby. The fathers' accounts highlight their marked influence on breast feeding, their ambivalent experiences related to breast feeding and their struggle in negotiating a parenting role related to baby feeding. this study highlights the role and influence that fathers of preterm babies have on breast feeding, and explores the tensions and paradoxes inherent in promoting the ideology of breast feeding while valuing the practice of bottle feeding. this study highlights the need to encourage and involve fathers in breast-feeding education including the impact of bottle feeding on breast-feeding outcomes. The active and positive contribution that fathers make towards preterm breast feeding should be acknowledged and encouraged.

Aerated biofilters with multiple-level air injection configurations to enhance biological treatment of methane emissions.

PubMed

Farrokhzadeh, Hasti; Hettiaratchi, J Patrick A; Jayasinghe, Poornima; Kumar, Sunil

2017-09-01

Aiming to improve conventional methane biofilter performance, a multiple-level aeration biofilter design is proposed. Laboratory flow-through column experiments were conducted to evaluate three actively-aerated methane biofilter configurations. Columns were aerated at one, two, and three levels of the bed depth, with air introduced at flow rates calculated from methane oxidation reaction stoichiometry. Inlet methane loading rates were increased in five stages between 6 and 18mL/min. The effects of methane feeding rate, levels of aeration, and residence time on methane oxidation rates were determined. Samples collected after completion of flow-through experiments were used to determine methane oxidation kinetic parameters, V max , K m , and methanotrophic community distribution across biofilter columns. Results obtained from mixed variances analysis and response surfaces, as well as methanotrophic activity data, suggested that, biofilter column with two aeration levels has the most even performance over time, maintaining 85.1% average oxidation efficiency over 95days of experiments. Copyright © 2017 Elsevier Ltd. All rights reserved.

Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi Method

NASA Astrophysics Data System (ADS)

Hazza Faizi Al-Hazza, Muataz; Ibrahim, Nur Asmawiyah bt; Adesta, Erry T. Y.; Khan, Ahsan Ali; Abdullah Sidek, Atiah Bt.

2017-03-01

One of the main challenges for any manufacturer is how to decrease the machining cost without affecting the final quality of the product. One of the new advanced machining processes in industry is the high speed hard end milling process that merges three advanced machining processes: high speed milling, hard milling and dry milling. However, one of the most important challenges in this process is to control the flank wear rate. Therefore a analyzing the flank wear rate during machining should be investigated in order to determine the best cutting levels that will not affect the final quality of the product. In this research Taguchi method has been used to investigate the effect of cutting speed, feed rate and depth of cut and determine the best level s to minimize the flank wear rate up to total length of 0.3mm based on the ISO standard to maintain the finishing requirements.

Oxygen saturation and heart rate during feeding in breast-fed infants at 1 week and 2 months of age.

PubMed

Suiter, Debra M; Ruark-McMurtrey, Jacki

2007-12-01

To gather normative data about cardiopulmonary changes during feeding in breast-fed infants at 1 week and 2 months of age. Prospective cohort study. General community. Twenty-two term-born, breast-fed infants. Not applicable. Oxygen saturation (SpO2), the percentage of oxygenized hemoglobin, and heart rate were monitored and recorded every 30 seconds for 5 minutes before oral feeding, during the first 10 minutes of feeding, and the first 10 minutes immediately after feeding. The observations were made at 1 week and 2 months of age. Mean SpO2 levels were significantly higher in 2-month-old infants (mean, 97.57) than in 1-week-old infants (mean, 96.35) (P=.001). SpO2 was not affected by any of the 3 trials (before, during, and after feeding). Heart rate was significantly affected by trial. Mean heart rate during feeding (mean, 152.45) was significantly higher than heart rate prefeeding (mean, 146.51) (P<.001), and heart rate postfeeding (mean, 147.12) (P=.002). Heart rate was not affected by age. Little is known about the association between feeding and cardiopulmonary status in term-born, breast-fed infants. This longitudinal study contributes to our knowledge about feeding-related cardiopulmonary changes in term-born, breast-fed infants.

A qualitative study exploring perceived barriers to infant feeding and caregiving among adolescent girls and young women in rural Bangladesh.

PubMed

Hackett, Kristy M; Mukta, Umme S; Jalal, Chowdhury S B; Sellen, Daniel W

2015-08-11

Infant feeding and caregiving by adolescent girls and young women in rural Bangladesh remains relatively understudied despite high potential vulnerability of younger mothers and their children due to poverty and high rates of early marriage and childbearing. This key knowledge gap may hamper the effectiveness of maternal, infant and child health interventions not specifically tailored to teenage mothers. This study aimed to narrow this gap by documenting key barriers to optimal infant and young child feeding and caregiving perceived by adolescent girls and young women in rural Bangladesh. Focus group discussions and in-depth semi-structured interviews were conducted with 70 adolescent girls and young women participating in a community-based adolescent empowerment program in two rural regions of northwestern Bangladesh. Participants were stratified into three groups: unmarried, married without child, and married with child(ren). Thematic analysis was performed to elucidate dominant ideas regarding challenges with child feeding and caregiving across participant strata. Participants in all three strata and in both geographical regions attributed actual and anticipated caregiving difficulties to five major contextual factors: early marriage, maternal time allocation conflicts, rural life, short birth intervals, and poverty. Indications are that many girls and young women anticipate difficulties in feeding and caring for their future children from an early age, and often prior to motherhood. Participants articulated both perceived need and unmet demand for additional education in infant and young child feeding, childcare, and family planning techniques. Provision during adolescence of appropriate education, services and financial aid to support best practices for infant feeding and childcare could significantly improve maternal self-efficacy, mental health, nutrition security and young childcare, nutrition and health in rural Bangladesh. Lessons learned can be applied in future programs aimed at supporting adolescent women along a continuum of care.

'Dancing on a thin line': evaluation of an infant feeding information team to implement the WHO code of marketing of breast-milk substitutes.

PubMed

Dykes, Fiona; Richardson-Foster, Helen; Crossland, Nicola; Thomson, Gill

2012-12-01

to conduct an in-depth evaluation of the Infant Feeding Information Team (IFIT) to implement the WHO Code of Marketing of Breast-milk Substitutes in North West England. The evaluation included consultations with inter-disciplinary professionals to explore their perceptions of the IFIT and related contextual issues. a qualitative, descriptive study involving seven focus groups (n=34) and semi-structured, in-depth interviews (face to face or via telephone; n=68) with a total of 102 participants. Thematic networks analysis was conducted to generate global, organising and basic themes. two maternity/primary health-care facilities located in the North-West of England. six global themes were generated; this paper focuses upon one of these themes: 'Dancing on a thin line'. This reflects the difficulties health-care staff face in negotiating political, professional and socio-cultural influences on infant feeding practices and how they struggle to implement best available evidence, guidance and practice when they experience incomplete, conflicting and competing messages around infant feeding. IFIT offers an innovative means to sustain contact with the formula industry without their unprecedented access to health facilities or personnel. Focused training opportunities should be provided to enable health-care staff to appreciate the constituent limitations of artificial milks and provide consistent, sensitive and comprehensive infant feeding information. Copyright © 2011 Elsevier Ltd. All rights reserved.

[Breast feeding rates and factors influencing breast feeding practice in late preterm infants: comparison with preterm born at less than 34 weeks of gestational age].

PubMed

Jang, Gun Ja; Lee, Sang Lak; Kim, Hyeon Mi

2012-04-01

This study was done to compare breast feeding rates and factors influencing feeding practice between late preterm (34 ≤ GA < 37) and preterm infants (GA<34). A survey was done of 207 late preterm and 117 preterm infants in neonatal intensive care units (NICU) of 4 university hospitals in D city. Data were collected from July 2009 to June 2010 from 324 medical records in the NICU. Breast-feeding at home was checked either by telephone survey or questioning during hospital visits. Rate of breast feeding for late preterm infants was significantly lower than for preterm infants. There was no significant difference in breast-feeding at home. We found differences in factors influencing breast feeding between the two groups. Factors influencing feeding for late preterm infants were type of delivery, mothers' occupation, feeding type during hospitalization, time elapse from hospital discharge, total admission days, infant's body weight at first feeding and length of NPO (nothing by mouth). Factors influencing feeding for preterm infants were birth order, maternal disease and obstetric complications, and one-minute Apgar score. Results of the study show low rates of breast-feeding for late preterm infants indicating a need for breast-feeding education for mothers of these infants.

Genetic selection, sex and feeding treatment affect the whole-body chemical composition of sheep.

PubMed

Lewis, R M; Emmans, G C

2007-11-01

Hypotheses on total body chemical composition were tested using data from 350 Suffolk sheep grown to a wide range of live weights, and fed in a non-limiting way, or with reduced amounts of feed, or ad libitum on feeds of reduced protein content. The sheep were from an experiment where selection used an index designed to increase the lean deposition rate while restricting the fat deposition rate. Ultrasound muscle and fat depths were the only composition measurements in the index. The animals were males and females from a selection (S) line and its unselected control (C). The protein content of the lipid-free dry matter was unaffected by live weight, sex or feeding treatment with only a very small effect of genetic line (0.762 kg/kg in S and 0.753 kg/kg in C; P < 0.05). The form of the relationship between water and protein was not affected by any of the factors; in the different kinds of sheep it was consistent with no effect other than through differences in mature protein weight. The water : protein ratio at maturity was estimated as 3.45. Over the whole dataset, lipid weight (L) increased with protein weight (P) according to L = 0.3135 × P1.850. Allowing for this scaling, fatness increased on low-protein feeds, was greater in females than in males and in C than in S (P < 0.001). Lipid content (g/kg fleece-free empty body weight) was reduced by restricted feeding only in males at the highest slaughter weight (114 kg). The lines differed in lipid content (P < 0.001) with means of 265.1 g/kg for C and 237.3 g/kg for S. Importantly, there was no interaction between line and feeding treatments. A higher proportion of total body protein was in the carcass in S than in C (0.627 v. 0.610; P < 0.001). For lipid, the difference was reversed (0.736 v. 0.744; P < 0.05). The total energy content increased quadratically with slaughter weight. At a particular weight, the energy content of gain was higher in females than in males and in C than in S. Genetic selection affected body composition at a weight favouring the distribution of protein to the carcass and lipid to the non-carcass. Once allowing for effects of genetic selection, sex and feeding treatment on fatness, simple rules can be used to generate the chemical composition of sheep.

Improvement of specific growth rate of Pichia pastoris for effective porcine interferon-α production with an on-line model-based glycerol feeding strategy.

PubMed

Gao, Min-Jie; Zheng, Zhi-Yong; Wu, Jian-Rong; Dong, Shi-Juan; Li, Zhen; Jin, Hu; Zhan, Xiao-Bei; Lin, Chi-Chung

2012-02-01

Effective expression of porcine interferon-α (pIFN-α) with recombinant Pichia pastoris was conducted in a bench-scale fermentor. The influence of the glycerol feeding strategy on the specific growth rate and protein production was investigated. The traditional DO-stat feeding strategy led to very low cell growth rate resulting in low dry cell weight (DCW) of about 90 g/L during the subsequent induction phase. The previously reported Artificial Neural Network Pattern Recognition (ANNPR) model-based glycerol feeding strategy improved the cell density to 120 g DCW/L, while the specific growth rate decreased from 0.15 to 0.18 to 0.03-0.08 h(-1) during the last 10 h of the glycerol feeding stage leading to a variation of the porcine interferon-α production, as the glycerol feeding scheme had a significant effect on the induction phase. This problem was resolved by an improved ANNPR model-based feeding strategy to maintain the specific growth rate above 0.11 h(-1). With this feeding strategy, the pIFN-α concentration reached a level of 1.43 g/L, more than 1.5-fold higher than that obtained with the previously adopted feeding strategy. Our results showed that increasing the specific growth rate favored the target protein production and the glycerol feeding methods directly influenced the induction stage. Consequently, higher cell density and specific growth rate as well as effective porcine interferon-α production have been achieved by our novel glycerol feeding strategy.

Experimental study of surface integrity and fatigue life in the face milling of inconel 718

NASA Astrophysics Data System (ADS)

Wang, Xiangyu; Huang, Chuanzhen; Zou, Bin; Liu, Guoliang; Zhu, Hongtao; Wang, Jun

2018-06-01

The Inconel 718 alloy is widely used in the aerospace and power industries. The machining-induced surface integrity and fatigue life of this material are important factors for consideration due to high reliability and safety requirements. In this work, the milling of Inconel 718 was conducted at different cutting speeds and feed rates. Surface integrity and fatigue life were measured directly. The effects of cutting speed and feed rate on surface integrity and their further influences on fatigue life were analyzed. Within the chosen parameter range, the cutting speed barely affected the surface roughness, whereas the feed rate increased the surface roughness through the ideal residual height. The surface hardness increased as the cutting speed and feed rate increased. Tensile residual stress was observed on the machined surface, which showed improvement with the increasing feed rate. The cutting speed was not an influencing factor on fatigue life, but the feed rate affected fatigue life through the surface roughness. The high surface roughness resulting from the high feed rate could result in a high stress concentration factor and lead to a low fatigue life.

Crustal accretion along the global mid-ocean ridge system based on basaltic glass and olivine-hosted melt inclusion compositions

NASA Astrophysics Data System (ADS)

Wanless, V. D.; Behn, M. D.

2015-12-01

The depth and distribution of crystallization at mid-ocean ridges controls the overall architecture of the oceanic crust, influences hydrothermal circulation, and determines geothermal gradients in the crust and uppermost mantle. Despite this, there is no overall consensus on how crystallization is distributed within the crust/upper mantle or how this varies with spreading rate. Here, we examine crustal accretion at mid-ocean ridges by combining crystallization pressures calculated from major element barometers on mid-ocean ridge basalt (MORB) glasses with vapor-saturation pressures from melt inclusions to produce a detailed map of crystallization depths and distributions along the global ridge system. We calculate pressures of crystallization from >11,500 MORB glasses from the global ridge system using two established major element barometers (1,2). Additionally, we use vapor-saturation pressures from >400 olivine-hosted melt inclusions from five ridges with variable spreading rates to constrain pressures and distributions of crystallization along the global ridge system. We show that (i) crystallization depths from MORB glasses increase and become less focused with decreasing spreading rate, (ii) maximum glass pressures are greater than the maximum melt inclusion pressure, which indicates that the melt inclusions do not record the deepest crystallization at mid-ocean ridges, and (iii) crystallization occurs in the lower crust/upper mantle at all ridges, indicating accretion is distributed throughout the crust at all spreading rates, including those with a steady-state magma lens. Finally, we suggest that the remarkably similar maximum vapor-saturation pressures (~ 3000 bars) in melt inclusion from all spreading rates reflects the CO2 content of the depleted upper mantle feeding the global mid-ocean ridge system. (1) Michael, P. & W. Cornell (1998), Journal of Geophysical Research, 103(B8), 18325-18356; (2) Herzberg, C. (2004), Journal of Petrology, 45(12), 2389.

Hydrodynamic starvation in first-feeding larval fishes

PubMed Central

China, Victor; Holzman, Roi

2014-01-01

Larval fishes suffer prodigious mortality rates, eliminating 99% of the brood within a few days after first feeding. Hjort (1914) famously attributed this “critical period” of low survival to the larvae’s inability to obtain sufficient food [Hjort (1914) Rapp P-v Réun Cons Int Explor Mer 20:1–228]. However, the cause of this poor feeding success remains to be identified. Here, we show that hydrodynamic constraints on the ubiquitous suction mechanism in first-feeding larvae limit their ability to capture prey, thereby reducing their feeding rates. Dynamic-scaling experiments revealed that larval size is the primary determinant of feeding rate, independent of other ontogenetic effects. We conclude that first-feeding larvae experience “hydrodynamic starvation,” in which low Reynolds numbers mechanistically limit their feeding performance even under high prey densities. Our results provide a hydrodynamic perspective on feeding of larval fishes that focuses on the physical properties of the larvae and prey, rather than on prey concentration and the rate of encounters. PMID:24843180

Feeding on dispersed vs. aggregated particles: The effect of zooplankton feeding behavior on vertical flux.

PubMed

Koski, Marja; Boutorh, Julia; de la Rocha, Christina

2017-01-01

Zooplankton feeding activity is hypothesized to attenuate the downward flux of elements in the ocean. We investigated whether the zooplankton community composition could influence the flux attenuation, due to the differences of feeding modes (feeding on dispersed vs. aggregated particles) and of metabolic rates. We fed 5 copepod species-three calanoid, one harpacticoid and one poecilamastoid-microplankton food, in either dispersed or aggregated form and measured rates of respiration, fecal pellet production and egg production. Calanoid copepods were able to feed only on dispersed food; when their food was introduced as aggregates, their pellet production and respiration rates decreased to rates observed for starved individuals. In contrast, harpacticoids and the poecilamastoid copepod Oncaea spp. were able to feed only when the food was in the form of aggregates. The sum of copepod respiration, pellet production and egg production rates was equivalent to a daily minimum carbon demand of ca. 10% body weight-1 for all non-feeding copepods; the carbon demand of calanoids feeding on dispersed food was 2-3 times greater, and the carbon demand of harpacticoids and Oncaea spp. feeding on aggregates was >7 times greater, than the resting rates. The zooplankton species composition combined with the type of available food strongly influences the calculated carbon demand of a copepod community, and thus also the attenuation of vertical carbon flux.

Feeding on dispersed vs. aggregated particles: The effect of zooplankton feeding behavior on vertical flux

PubMed Central

Boutorh, Julia; de la Rocha, Christina

2017-01-01

Zooplankton feeding activity is hypothesized to attenuate the downward flux of elements in the ocean. We investigated whether the zooplankton community composition could influence the flux attenuation, due to the differences of feeding modes (feeding on dispersed vs. aggregated particles) and of metabolic rates. We fed 5 copepod species—three calanoid, one harpacticoid and one poecilamastoid–microplankton food, in either dispersed or aggregated form and measured rates of respiration, fecal pellet production and egg production. Calanoid copepods were able to feed only on dispersed food; when their food was introduced as aggregates, their pellet production and respiration rates decreased to rates observed for starved individuals. In contrast, harpacticoids and the poecilamastoid copepod Oncaea spp. were able to feed only when the food was in the form of aggregates. The sum of copepod respiration, pellet production and egg production rates was equivalent to a daily minimum carbon demand of ca. 10% body weight-1 for all non-feeding copepods; the carbon demand of calanoids feeding on dispersed food was 2–3 times greater, and the carbon demand of harpacticoids and Oncaea spp. feeding on aggregates was >7 times greater, than the resting rates. The zooplankton species composition combined with the type of available food strongly influences the calculated carbon demand of a copepod community, and thus also the attenuation of vertical carbon flux. PMID:28545095

Cardiorespiratory parameters and their relation with gestational age and level of oral feeding skills in preterm infants.

PubMed

Yamamoto, Raquel Coube de Carvalho; Prade, Leila Sauer; Berwig, Luana Cristina; Weinmann, Angela Regina Maciel; Keske-Soares, Márcia

2016-01-01

To correlate cardiorespiratory parameters with gestational age and level of oral feeding skills in the first oral feeding in preterm infants. Study participants were 37 clinically stable preterm infants. Cardiorespiratory rate was assessed before and after introduction of oral feeding. The newborns were divided into three strata according to gestational age at birth. Oral skill was classified into four levels: I - low oral skill and low resistance to feeding; II - low oral skill and high resistance to feeding; III - high oral skill and low resistance to feeding; IV - high oral skill and high resistance to feeding. No difference was observed in heart and respiratory rate between the strata of gestational age at birth and between the levels of oral skill. Comparison between pre- and post-cardiorespiratory rates within each level of oral skill and stratum of gestational age showed difference between heart rate in the strata of gestational ages of 30 to 33 weeks and of 34 to 36 weeks, as well as between oral skill of levels I, II, and IV. With regard to the comparison between pre- and post- respiratory rates, difference was found in the oral skill of level I. Differences were observed between pre- and post-prandial cardiorespiratory rates regarding the first oral feeding, as well as between strata of gestational age at birth and levels of oral feeding skills.

Influence of spatial heterogeneity on the type of zooplankton functional response: A study based on field observations

NASA Astrophysics Data System (ADS)

Morozov, Andrew; Arashkevich, Elena; Reigstad, Marit; Falk-Petersen, Stig

2008-10-01

Mathematical models of plankton dynamics are sensitive to the choice of type of zooplankton functional response, i.e., to how the rate of intake of food varies with the food density. Conventionally, the conclusion on the actual type of functional response for a given zooplankton species is made based upon laboratory analysis on experimental feeding. In this paper, we show that such an approach can be too simplistic and misleading. Based on real ocean data obtained from three expeditions of R/V Jan Mayen in the Barents Sea in 2003-2005, we demonstrate that vertical heterogeneity in algal distribution as well as active vertical movement of herbivorous zooplankton can modify the type of trophic response completely. In particular, we found that the rate of average intake of algae by Calanus glacialis exhibits a Holling type III response, instead of Holling type I or II found previously in laboratory experiments. We argue that this conceptual discrepancy is due to the ability of the zooplankton to feed in layers with high algal density and to avoid depths with lower algal density. Since theoretical studies would predict enhancing in system stability in the case of Holling type III, our results may be of importance for understanding the main factors controlling plankton dynamics.

Domestic Animal Hosts Strongly Influence Human-Feeding Rates of the Chagas Disease Vector Triatoma infestans in Argentina

PubMed Central

Gürtler, Ricardo E.; Cecere, María C.; Vázquez-Prokopec, Gonzalo M.; Ceballos, Leonardo A.; Gurevitz, Juan M.; Fernández, María del Pilar; Kitron, Uriel; Cohen, Joel E.

2014-01-01

Background The host species composition in a household and their relative availability affect the host-feeding choices of blood-sucking insects and parasite transmission risks. We investigated four hypotheses regarding factors that affect blood-feeding rates, proportion of human-fed bugs (human blood index), and daily human-feeding rates of Triatoma infestans, the main vector of Chagas disease. Methods A cross-sectional survey collected triatomines in human sleeping quarters (domiciles) of 49 of 270 rural houses in northwestern Argentina. We developed an improved way of estimating the human-feeding rate of domestic T. infestans populations. We fitted generalized linear mixed-effects models to a global model with six explanatory variables (chicken blood index, dog blood index, bug stage, numbers of human residents, bug abundance, and maximum temperature during the night preceding bug catch) and three response variables (daily blood-feeding rate, human blood index, and daily human-feeding rate). Coefficients were estimated via multimodel inference with model averaging. Findings Median blood-feeding intervals per late-stage bug were 4.1 days, with large variations among households. The main bloodmeal sources were humans (68%), chickens (22%), and dogs (9%). Blood-feeding rates decreased with increases in the chicken blood index. Both the human blood index and daily human-feeding rate decreased substantially with increasing proportions of chicken- or dog-fed bugs, or the presence of chickens indoors. Improved calculations estimated the mean daily human-feeding rate per late-stage bug at 0.231 (95% confidence interval, 0.157–0.305). Conclusions and Significance Based on the changing availability of chickens in domiciles during spring-summer and the much larger infectivity of dogs compared with humans, we infer that the net effects of chickens in the presence of transmission-competent hosts may be more adequately described by zoopotentiation than by zooprophylaxis. Domestic animals in domiciles profoundly affect the host-feeding choices, human-vector contact rates and parasite transmission predicted by a model based on these estimates. PMID:24852606

Breast-feeding rates at an inner-city pediatric practice.

PubMed

Furman, Lydia; Combs, Bridget C; Alexander, Ashley D; O'Riordan, Mary Ann

2008-11-01

To determine rates of breast-feeding in the first 2 months of life at an inner-city pediatric practice. Using retrospective chart reviews, we examined all visits through 2 months of age for infants seen from April 1, 2007, to June 29, 2007, at the Pediatric Practice of Rainbow Babies and Children's Hospital, Cleveland, Ohio, which serves a low-income urban population. Rates of breast-feeding were analyzed by visit number and by infant age category. We reviewed all 557 visits occurring between birth and 2 months of age for all 223 eligible infants. At visit 1 (median age 5 days), the rates of exclusive and any breast-feeding were 22.0% and 40.8%, respectively. By visit 3 (median age 43 days), the rates of exclusive and any breast-feeding were 10.6% and 24.5%, respectively. These inner-city breast-feeding rates are substantially below reported regional and national rates. Barriers to implementing urgently needed interventions are discussed.

Impact of betaine on pig finishing performance and carcass composition.

PubMed

Lawrence, B V; Schinckel, A P; Adeola, O; Cera, K

2002-02-01

Two experiments were conducted to evaluate the effect of betaine supplementation of finishing diets on growth performance and carcass characteristics of swine. Experiment 1 included 288 pigs in a 2 x 2 x 3 factorial arrangement of treatments consisting of barrows and gilts of two genetic populations fed diets with 1.25 g/kg supplemental betaine from either 83 or 104 kg to 116 kg and control pigs fed betaine-devoid diets. Pigs were housed three pigs per pen with eight replicate pens per treatment. Diets were corn-soybean meal-based with 300 ppm added choline. Genetic populations differed (P < 0.05) in fat depth (2.24 vs 2.93 cm) and longissimus muscle depth (53.8 vs 49.1 mm) at 116 kg. Betaine reduced feed intake (P < 0.05); however, real-time ultrasound measurements were not affected. In Exp. 2, 400 pigs were used in a 2 x 2 x 2 factorial arrangement of treatments to evaluate the effect of sex (barrow or gilts), betaine (0 or 1 g/kg of diet), and crude protein (CP) (0.70% lysine = 12.7% CP or 0.85% lysine = 15.0% CP) when fed from 60 to 110 kg live weight. Pigs had been assigned to either a high- or low-protein feeding regimen at an average initial weight of 11.3 kg and were maintained on their respective protein levels throughout the experiment. For a 56-d period from 61.7 kg to 113.6 kg, pigs were fed diets with 300 ppm added choline. Within each protein level, pigs were randomly assigned to diets containing 0 or 1 g/kg betaine. Pigs were group-housed (four to five pigs per pen). Pig weight and feed intake were recorded every 28 d. Real-time ultrasound measurements were recorded initially and at d 28 on 64 pigs, and on all pigs prior to slaughter. Growth rate was fastest and feed intake greatest for barrows (P < 0.05) and for pigs receiving 12.7% crude protein. A crude protein x betaine interaction (P < 0.05) was observed from d 28 to 56 with pigs fed the 15% CP diet growing fastest when supplemented with 1 g/kg betaine, and pigs receiving the 12.7% CP diet growing fastest when the diets contained 0 g/kg betaine. Gilts more efficiently (P < 0.05) converted feed into body weight gain, as did pigs receiving the 12.7% CP diet (P < 0.05). Longissimus muscle area and fat measurements were unaffected by betaine or dietary protein on d 28. However, by d 56 betaine reduced average fat depth in barrows (P < 0.05; 3.21 vs 3.40 cm), but not in gilts. Betaine may be more effective at altering body composition in barrows than in gilts.

Effect of cutting parameters on strain hardening of nickel–titanium shape memory alloy

NASA Astrophysics Data System (ADS)

Wang, Guijie; Liu, Zhanqiang; Ai, Xing; Huang, Weimin; Niu, Jintao

2018-07-01

Nickel–titanium shape memory alloy (SMA) has been widely used as implant materials due to its good biocompatibility, shape memory property and super-elasticity. However, the severe strain hardening is a main challenge due to cutting force and temperature caused by machining. An orthogonal experiment of nickel–titanium SMA with different milling parameters conditions was conducted in this paper. On the one hand, the effect of cutting parameters on work hardening is obtained. It is found that the cutting speed has the most important effect on work hardening. The depth of machining induced layer and the degree of hardening become smaller with the increase of cutting speed when the cutting speed is less than 200 m min‑1 and then get larger with further increase of cutting speed. The relative intensity of diffraction peak increases as the cutting speed increase. In addition, all of the depth of machining induced layer, the degree of hardening and the relative intensity of diffraction peak increase when the feed rate increases. On the other hand, it is found that the depth of machining induced layer is closely related with the degree of hardening and phase transition. The higher the content of austenite in the machined surface is, the higher the degree of hardening will be. The depth of the machining induced layer increases with the degree of hardening increasing.

Evaluation of formulated feed for juvenile lake sturgeon (Acipenser fulvescens) based on growth performance and nutrient retention

USDA-ARS?s Scientific Manuscript database

This study evaluated the potential of giving formulated feed to juvenile lake sturgeon (Acipenser fulvescens) and determined the optimal feeding rate of a soft-moist feed on the growth performance and whole-body composition of this fish. Six feeding rates (% body weight per day: % BW/d) of a soft-mo...

Effects of low-density feeding on elk–fetus contact rates on Wyoming feedgrounds

USGS Publications Warehouse

Creech, Tyler G.; Cross, Paul C.; Scurlock, Brandon M.; Maichak, Eric J.; Rogerson, Jared D.; Henningsen, John C.; Creel, Scott

2012-01-01

High seroprevalance for Brucella abortus among elk on Wyoming feedgrounds suggests that supplemental feeding may influence parasite transmission and disease dynamics by altering the rate at which elk contact infectious materials in their environment. We used proximity loggers and video cameras to estimate rates of elk-to-fetus contact (the primary source of brucellosis transmission) during winter supplemental feeding. We compared contact rates during high-density and low-density (LD) feeding treatments that provided the same total amount of food distributed over different areas. Low-density feeding led to >70% reductions in total number of contacts and number of individuals contacting a fetus. Proximity loggers and video cameras provided similar estimates of elk–fetus contact rates. Elk contacted fetuses and random control points equally, suggesting that elk were not attracted to fetuses but encountered them incidentally while feeding. The modeled relationship between contact rate and disease prevalence is nonlinear and LD feeding may result in large reductions in brucellosis prevalence, but this depends on the amount of transmission that occurs on and off feedgrounds.

What drives interaction strengths in complex food webs? A test with feeding rates of a generalist stream predator.

PubMed

Preston, Daniel L; Henderson, Jeremy S; Falke, Landon P; Segui, Leah M; Layden, Tamara J; Novak, Mark

2018-05-08

Describing the mechanisms that drive variation in species interaction strengths is central to understanding, predicting, and managing community dynamics. Multiple factors have been linked to trophic interaction strength variation, including species densities, species traits, and abiotic factors. Yet most empirical tests of the relative roles of multiple mechanisms that drive variation have been limited to simplified experiments that may diverge from the dynamics of natural food webs. Here, we used a field-based observational approach to quantify the roles of prey density, predator density, predator-prey body-mass ratios, prey identity, and abiotic factors in driving variation in feeding rates of reticulate sculpin (Cottus perplexus). We combined data on over 6,000 predator-prey observations with prey identification time functions to estimate 289 prey-specific feeding rates at nine stream sites in Oregon. Feeding rates on 57 prey types showed an approximately log-normal distribution, with few strong and many weak interactions. Model selection indicated that prey density, followed by prey identity, were the two most important predictors of prey-specific sculpin feeding rates. Feeding rates showed a positive relationship with prey taxon densities that was inconsistent with predator saturation predicted by current functional response models. Feeding rates also exhibited four orders-of-magnitude in variation across prey taxonomic orders, with the lowest feeding rates observed on prey with significant anti-predator defenses. Body-mass ratios were the third most important predictor variable, showing a hump-shaped relationship with the highest feeding rates at intermediate ratios. Sculpin density was negatively correlated with feeding rates, consistent with the presence of intraspecific predator interference. Our results highlight how multiple co-occurring drivers shape trophic interactions in nature and underscore ways in which simplified experiments or reliance on scaling laws alone may lead to biased inferences about the structure and dynamics of species-rich food webs. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Feed rate affecting surface roughness and tool wear in dry hard turning of AISI 4140 steel automotive parts using TiN+AlCrN coated inserts

NASA Astrophysics Data System (ADS)

Paengchit, Phacharadit; Saikaew, Charnnarong

2018-02-01

This work aims to investigate the effects of feed rate on surface roughness (Ra) and tool wear (VB) and to obtain the optimal operating condition of the feed rate in dry hard turning of AISI 4140 chromium molybdenum steel for automotive industry applications using TiN+AlCrN coated inserts. AISI 4140 steel bars were employed in order to carry out the dry hard turning experiments by varying the feed rates of 0.06, 0.08 and 0.1 mm/rev based on experimental design technique that can be analyzed by analysis of variance (ANOVA). In addition, the cutting tool inserts were examined after machining experiments by SEM to evaluate the effect of turning operations on tool wear. The results showed that averages Ra and VB were significantly affected by the feed rate at the level of significance of 0.05. Averages Ra and VB values at the feed rate of 0.06 mm/rev were lowest compared to average values at the feed rates of 0.08 and 0.1 mm/rev, based on the main effect plot.

Seasonal dynamics of megafauna on the deep West Antarctic Peninsula shelf in response to variable phytodetrital influx.

PubMed

Sumida, P Y G; Smith, C R; Bernardino, A F; Polito, P S; Vieira, D R

2014-11-01

The deep West Antarctic Peninsula (WAP) shelf is characterized by intense deposition of phytodetritus during spring/summer months, while very little food material reaches the seafloor during winter. The response of the shelf benthic megafauna to this highly variable food supply is still poorly understood. In order to characterize the deposition of phytodetritus and the megabenthic community response, we deployed a seafloor time-lapse camera at approximately 590 m depth on the mid WAP shelf west of Anvers Island for 15 months. Seafloor photographs were taken at intervals of 12 or 24 h nearly continuously from 9 December 1999 (austral winter) to 20 March 2001 (summer) and analysed for phytodetritus deposition and megafaunal dynamics. Seafloor images indicated a marked seasonal arrival of greenish phytodetritus, with large interannual and seasonal variability in the coverage of depositing phytodetrital particles. The surface-deposit-feeding elasipod holothurians Protelpidia murrayi and Peniagone vignoni dominated the epibenthic megafauna throughout the year, frequently constituting more than 80% of the megafaunal abundance, attaining total densities of up to 2.4 individuals m(-2). Elasipod abundances were significantly higher in summer than winter. During summer periods of high phytodetrital flux, Pr. murrayi produced faecal casts at higher rates, indicating intensified population-level feeding activity. In March-June 2000, faecal casts lasted longest, suggesting lower horizontal bioturbation activity during autumn-winter. Our data indicate that the Pr. murrayi population increases its feeding rates in response to increasing amounts and/or lability of organic matter on the sediment surface. Assuming that this species feeds on the top millimetre of the sediment, we estimate that, during periods of high phytodetrital flux, the Pr. murrayi population reworks one square metre of sediment surface in approximately 287 days. We suggest that Pr. murrayi is an important species for organic-carbon recycling on the deep WAP shelf, controlling the availability of deposited labile phytodetritus to the broader shelf benthic community.

Seasonal dynamics of megafauna on the deep West Antarctic Peninsula shelf in response to variable phytodetrital influx

PubMed Central

Sumida, P. Y. G.; Smith, C. R.; Bernardino, A. F.; Polito, P. S.; Vieira, D. R.

2014-01-01

The deep West Antarctic Peninsula (WAP) shelf is characterized by intense deposition of phytodetritus during spring/summer months, while very little food material reaches the seafloor during winter. The response of the shelf benthic megafauna to this highly variable food supply is still poorly understood. In order to characterize the deposition of phytodetritus and the megabenthic community response, we deployed a seafloor time-lapse camera at approximately 590 m depth on the mid WAP shelf west of Anvers Island for 15 months. Seafloor photographs were taken at intervals of 12 or 24 h nearly continuously from 9 December 1999 (austral winter) to 20 March 2001 (summer) and analysed for phytodetritus deposition and megafaunal dynamics. Seafloor images indicated a marked seasonal arrival of greenish phytodetritus, with large interannual and seasonal variability in the coverage of depositing phytodetrital particles. The surface-deposit-feeding elasipod holothurians Protelpidia murrayi and Peniagone vignoni dominated the epibenthic megafauna throughout the year, frequently constituting more than 80% of the megafaunal abundance, attaining total densities of up to 2.4 individuals m−2. Elasipod abundances were significantly higher in summer than winter. During summer periods of high phytodetrital flux, Pr. murrayi produced faecal casts at higher rates, indicating intensified population-level feeding activity. In March–June 2000, faecal casts lasted longest, suggesting lower horizontal bioturbation activity during autumn–winter. Our data indicate that the Pr. murrayi population increases its feeding rates in response to increasing amounts and/or lability of organic matter on the sediment surface. Assuming that this species feeds on the top millimetre of the sediment, we estimate that, during periods of high phytodetrital flux, the Pr. murrayi population reworks one square metre of sediment surface in approximately 287 days. We suggest that Pr. murrayi is an important species for organic-carbon recycling on the deep WAP shelf, controlling the availability of deposited labile phytodetritus to the broader shelf benthic community. PMID:26064564

Performance of Ti-multilayer coated tool during machining of MDN431 alloyed steel

NASA Astrophysics Data System (ADS)

Badiger, Pradeep V.; Desai, Vijay; Ramesh, M. R.

2018-04-01

Turbine forgings and other components are required to be high resistance to corrosion and oxidation because which they are highly alloyed with Ni and Cr. Midhani manufactures one of such material MDN431. It's a hard-to-machine steel with high hardness and strength. PVD coated insert provide an answer to problem with its state of art technique on the WC tool. Machinability studies is carried out on MDN431 steel using uncoated and Ti-multilayer coated WC tool insert using Taguchi optimisation technique. During the present investigation, speed (398-625rpm), feed (0.093-0.175mm/rev), and depth of cut (0.2-0.4mm) varied according to Taguchi L9 orthogonal array, subsequently cutting forces and surface roughness (Ra) were measured. Optimizations of the obtained results are done using Taguchi technique for cutting forces and surface roughness. Using Taguchi technique linear fit model regression analysis carried out for the combination of each input variable. Experimented results are compared and found the developed model is adequate which supported by proof trials. Speed, feed and depth of cut are linearly dependent on the cutting force and surface roughness for uncoated insert whereas Speed and depth of cut feed is inversely dependent in coated insert for both cutting force and surface roughness. Machined surface for coated and uncoated inserts during machining of MDN431 is studied using optical profilometer.

The Chinese-born immigrant infant feeding and growth hypothesis.

PubMed

Bolton, Kristy A; Kremer, Peter; Hesketh, Kylie D; Laws, Rachel; Campbell, Karen J

2016-10-11

Rapid growth in the first six months of life is a well-established risk factor for childhood obesity, and child feeding practices (supplementation or substitution of breast milk with formula and early introduction of solids) have been reported to predict this. The third largest immigrant group in Australia originate from China. Case-studies reported from Victorian Maternal and Child Health nurses suggest that rapid growth trajectories in the infants of Chinese parents is common place. Furthermore, these nurses report that high value is placed by this client group on rapid growth and a fatter child; that rates of breastfeeding are low and overfeeding of infant formula is high. There are currently no studies which describe infant growth or its correlates among this immigrant group. We postulate that in Australia, Chinese-born immigrant mothers will have different infant feeding practices compared to non-immigrant mothers and this will result in different growth trajectories and risk of overweight. We present the Chinese-born immigrant infant feeding and growth hypothesis - that less breastfeeding, high formula feeding and early introduction of solids in infants of Chinese-born immigrant mothers living in Australia will result in a high protein intake and subsequent rapid growth trajectory and increased risk of overweight and obesity. Three related studies will be conducted to investigate the hypothesis. These will include two quantitative studies (one cross-sectional, one longitudinal) and a qualitative study. The quantitative studies will investigate differences in feeding practices in Chinese-born immigrant compared to non-immigrant mothers and infants; and the growth trajectories over the first 3.5 years of life. The qualitative study will provide more in-depth understanding of the influencing factors on feeding practices in Chinese-born immigrant mothers. This study will provide evidence of the potential modifiable feeding practices and risk of overweight faced by Chinese-born immigrants living in Australia. This is important to help identify groups at risk of rapid growth and subsequent risk of obesity, to identify opportunities for intervention, and to be able to tailor prevention initiatives appropriately.

Promotion of exclusive breast-feeding at scale within routine health services: impact of breast-feeding counselling training for community health workers in Recife, Brazil.

PubMed

Coutinho, Sonia B; Lira, Pedro Ic; Lima, Marilia C; Frias, Paulo G; Eickmann, Sophie H; Ashworth, Ann

2014-04-01

Breast-feeding counselling has been identified as the intervention with the greatest potential for reducing child deaths, but there is little experience in delivering breast-feeding counselling at scale within routine health systems. The study aim was to compare rates of exclusive breast-feeding associated with a breast-feeding counselling intervention in which community health agents (CHA) received 20 h of training directed at counselling and practical skills with rates pre-intervention when CHA received 4 h of didactic teaching. Cross-sectional surveys of breast-feeding practices were conducted pre- and post-intervention in random samples of 1266 and 1245 infants aged 0-5.9 months, respectively. Recife, Brazil, with a population of 2 million. CHA (n 1449) of Brazil's Family Health Programme were trained to provide breast-feeding counselling at home visits. Rates of exclusive breast-feeding improved when CHA were trained to provide breast-feeding counselling and were significantly higher by 10-13 percentage points at age 3-5.9 months when compared with pre-intervention rates (P < 0.05). Post-intervention point prevalence of exclusive breast-feeding for infants aged <4 months was 63% and for those aged <6 months was 50%. Multifunctional CHA were able to deliver breast-feeding counselling at scale within a routine health service and this was associated with a significant increase in rates of exclusive breast-feeding. The study reinforces the need to focus training on counselling and practical skills; a key component was an interactive style that utilized the knowledge and experience of CHA. The findings are relevant to the call by international organizations to scale up breast-feeding counselling.

'Unfit for human consumption': a study of the contamination of formula milk fed to young children in East Java, Indonesia.

PubMed

Gibson, Sarah; Sahanggamu, Daniel; Fatmaningrum, Dewi; Curtis, Val; White, Sian

2017-10-01

To examine levels of bacterial contamination in formula feeding bottles in Sidoarjo, East Java, and to assess the preparation practices that may have been responsible. A cross-sectional study was conducted among 92 randomly selected households with children under the age of two who were bottle-fed formula. In each household, we carried out video observation of mothers/caregivers preparing bottles, and examined samples of formula for coliform bacteria and Escherichia coli (E. coli). In-depth interviews were conducted with a subsample of 20 mothers. A total of 88% of the formula feeds were contaminated with total coliforms at a level >10 MPN/ml, and 45% contained E. coli. These feeds were defined as 'unfit for human consumption'. In the video observations, none of the mothers complied with all five WHO-recommended measures of hygienic formula feed preparation. Only two mothers washed their hands with soap prior to formula preparation. Most mothers also failed to clean or sterilise the bottle and clean the preparation area. In-depth interviews confirmed that such suboptimal hygiene practices were common. The high levels of contamination found highlight that bottles are an important faecal-oral exposure pathway resulting from poor hygiene practices during bottle preparation. © 2017 John Wiley & Sons Ltd.

Determinants of breast-feeding within the first 6 months post-partum in rural Vietnam.

PubMed

Duong, Dat V; Lee, Andy H; Binns, Colin W

2005-07-01

This study explored the determinants of breast-feeding practices within the first 6 months post-partum among women residing in rural Vietnam. The study was conducted in Quang Xuong district, in the Thanh Hoa Province of Vietnam. In the first phase, 463 women were prospectively studied at weeks 1, 16 and 24 post-partum. During the second phase, 16 focus group discussions were undertaken to obtain complementary information. Exclusive breast-feeding dropped from 83.6% at week 1 to 43.6% at week 16 and by week 24, no infant was exclusively breast-fed. A logistic regression analysis found 'mother's education level', 'mother's decision-making on breast-feeding', 'mother's comfort to breast-feed in public places', 'father's occupation', 'feeding preference of father' and 'having sufficient food for the family' significantly influenced the exclusive breast-feeding practice. Qualitative data provided in-depth information on factors relating to mother, infant, close relatives and providers. Providing appropriate training and supportive supervision on breast-feeding counselling to health workers and supporting working mothers to exclusively breast-feed their infants through community mobilization were recommended to improve breast-feeding in rural Vietnam.

Using Goffman's theories of social interaction to reflect first-time mothers' experiences with the social norms of infant feeding.

PubMed

Brouwer, Marissa A; Drummond, Claire; Willis, Eileen

2012-10-01

Infant feeding, particularly breastfeeding, is an important public health issue because early feeding methods have been shown to influence health throughout childhood. We investigated how social norms influence first-time mothers' decisions around feeding methods. We conducted two in-depth interviews with 11 first-time mothers, the first 3 weeks after birth and the second 3 months following birth. We analyzed interview data using a third-level, thematic analysis, using Goffman's theories of social interaction to guide our analysis. Our results highlighted several issues surrounding breastfeeding in modern society. We propose that nursing mothers are conscious of adhering to social norms of being a good mother, but must also cope with societal views about presenting normal appearances when they need to feed their babies in public.

Breast-feeding and Vitamin D Supplementation Rates in the Ochsner Health System

PubMed Central

Ponnapakkam, Tulasi; Ravichandran, Anisha; Bradford, Elease; Tobin, Gregory; Gensure, Robert

2008-01-01

Breast-feeding imparts many benefits to both mothers and infants. Because of these numerous recognized benefits, there has been an effort to increase breast-feeding rates nationwide; increasing breast-feeding rates was one of the goals of the U.S. Department of Health and Human Services' Healthy People 2010 initiative. This study examined the breast-feeding rate at the Ochsner Clinic Foundation by conducting a retrospective chart review of patients aged 0–12 months who visited any branch of the Ochsner hospital system. Our results indicate that the rate of initiation of breast-feeding for children followed at the Ochsner Clinic Foundation is 66.3%. However, as breast-feeding rates rise, there is concern that there may be a resurgence of rickets, a disease caused by the deficiency of vitamin D. Currently the American Academy of Pediatrics recommends that exclusively breast-fed infants receive vitamin D supplementation starting within the first 2 months of life. We have therefore initiated a clinical trial to determine whether vitamin D supplementation is required to prevent rickets in breast-fed children. In the course of conducting this study, we have gathered additional data regarding the patterns of breast-feeding and of vitamin D supplementation for babies born at Ochsner. PMID:21603467

Breast-feeding and Vitamin D Supplementation Rates in the Ochsner Health System.

PubMed

Ponnapakkam, Tulasi; Ravichandran, Anisha; Bradford, Elease; Tobin, Gregory; Gensure, Robert

2008-01-01

Breast-feeding imparts many benefits to both mothers and infants. Because of these numerous recognized benefits, there has been an effort to increase breast-feeding rates nationwide; increasing breast-feeding rates was one of the goals of the U.S. Department of Health and Human Services' Healthy People 2010 initiative. This study examined the breast-feeding rate at the Ochsner Clinic Foundation by conducting a retrospective chart review of patients aged 0-12 months who visited any branch of the Ochsner hospital system. Our results indicate that the rate of initiation of breast-feeding for children followed at the Ochsner Clinic Foundation is 66.3%. However, as breast-feeding rates rise, there is concern that there may be a resurgence of rickets, a disease caused by the deficiency of vitamin D. Currently the American Academy of Pediatrics recommends that exclusively breast-fed infants receive vitamin D supplementation starting within the first 2 months of life. We have therefore initiated a clinical trial to determine whether vitamin D supplementation is required to prevent rickets in breast-fed children. In the course of conducting this study, we have gathered additional data regarding the patterns of breast-feeding and of vitamin D supplementation for babies born at Ochsner.

A model of clearance rate regulation in mussels

NASA Astrophysics Data System (ADS)

Fréchette, Marcel

2012-10-01

Clearance rate regulation has been modelled as an instantaneous response to food availability, independent of the internal state of the animals. This view is incompatible with latent effects during ontogeny and phenotypic flexibility in clearance rate. Internal-state regulation of clearance rate is required to account for these patterns. Here I develop a model of internal-state based regulation of clearance rate. External factors such as suspended sediments are included in the model. To assess the relative merits of instantaneous regulation and internal-state regulation, I modelled blue mussel clearance rate and growth using a DEB model. In the usual standard feeding module, feeding is governed by a Holling's Type II response to food concentration. In the internal-state feeding module, gill ciliary activity and thus clearance rate are driven by internal reserve level. Factors such as suspended sediments were not included in the simulations. The two feeding modules were compared on the basis of their ability to capture the impact of latent effects, of environmental heterogeneity in food abundance and of physiological flexibility on clearance rate and individual growth. The Holling feeding module was unable to capture the effect of any of these sources of variability. In contrast, the internal-state feeding module did so without any modification or ad hoc calibration. Latent effects, however, appeared transient. With simple annual variability in temperature and food concentration, the relationship between clearance rate and food availability predicted by the internal-state feeding module was quite similar to that observed in Norwegian fjords. I conclude that in contrast with the usual Holling feeding module, internal-state regulation of clearance rate is consistent with well-documented growth and clearance rate patterns.

Breast-feeding patterns in Central Israel.

PubMed

Berger-Achituv, Sivan; Shohat, Tamar; Garty, Ben-Zion

2005-08-01

The rate of breast-feeding in Israel has increased over the last two decades but is still lower than rates in other developed countries that have taken an active role in promoting breast-feeding. To determine breast-feeding patterns and the association between sociodemographic characteristics and breast-feeding in the Tel Aviv district. The mothers of infants aged 2, 4, 6 and 12 months, attending 59 well-baby clinics in the Tel Aviv district, were interviewed by telephone. Singleton infants who weighed less than 2,000 g and multiple-gestation infants were excluded from the study. The questions covered background data, sociodemographic characteristics of the family, and breast-feeding practices. Stepwise logistic regression was used to analyze the association between breast-feeding and various sociodemographic characteristics. Altogether, 78.5% of the mothers (1,307/1,665) initiated breast-feeding. The rate of breast-feeding at 2, 4, 6 and 12 months was 55.8, 36.8, 29.9 and 11.8%, respectively. Only 35.8% of the infants at 2 months and 11.2% at 6 months were exclusively breast-fed. The mean duration of breast-feeding was 5.2 +/- 0.2 months. Grand multiparas (> or = 5 children) had a significantly higher rate of breast-feeding than women with one to four children (P < 0.001). More likely to breast-feed for 2 weeks or longer were women married to Yeshiva students (odds ratio = 5.3), women with > or = 13 years education (OR = 2.1), and women on maternity leave (OR = 1.6). The predictors for breast-feeding for 6 months or longer were similar. Although the rate of breast-feeding initiation in central Israel was 78.5%, only 29.9% of the mothers continue to breast-feed for 6 months. Already at a young age, an appreciable number of breast-fed infants receive infant formula. Breast-feeding promotion should focus on less educated women, homemakers, and families with one to four children.

Session 1: Public health nutrition. Breast-feeding practices in Ireland.

PubMed

Tarrant, Roslyn C; Kearney, John M

2008-11-01

Breast-feeding is the superior infant feeding method from birth, with research consistently demonstrating its numerous short- and long-term health benefits for both mother and infant. As a global recommendation the WHO advises that mothers should exclusively breast-feed for the first 6-months of life, thus delaying the introduction of solids during this time. Historically, Irish breast-feeding initiation rates have remained strikingly low in comparison with international data and there has been little improvement in breast-feeding duration rates. There is wide geographical variation in terms of breast-feeding initiation both internationally and in Ireland. Some of these differences in breast-feeding rates may be associated with differing socio-economic characteristics. A recent cross-sectional prospective study of 561 pregnant women attending a Dublin hospital and followed from the antenatal period to 6 months post partum has found that 47% of the Irish-national mothers initiated breast-feeding, while only 24% were still offering 'any' breast milk to their infants at 6 weeks. Mothers' positive antenatal feeding intention to breast-feed is indicated as one of the most important independent determinants of initiation and 'any' breast-feeding at 6 weeks, suggesting that the antenatal period should be targeted as an effective time to influence and affect mothers' attitudes and beliefs pertaining to breast-feeding. These results suggest that the 'cultural' barrier towards breast-feeding appears to still prevail in Ireland and consequently an environment that enables women to breast-feed is far from being achieved. Undoubtedly, a shift towards a more positive and accepting breast-feeding culture is required if national breast-feeding rates are to improve.

Regular monitoring of breast-feeding rates: feasible and sustainable. The Emilia-Romagna experience.

PubMed

Di Mario, Simona; Borsari, Silvana; Verdini, Eleonora; Battaglia, Sergio; Cisbani, Luca; Sforza, Stefano; Cuoghi, Chiara; Basevi, Vittorio

2017-08-01

An efficient breast-feeding monitoring system should be in place in every country to assist policy makers and health professionals plan activities to reach optimal breast-feeding rates. Design/Setting/Subjects From March to June 2015, breast-feeding rates at 3 and 5 months of age were monitored in Emilia-Romagna, an Italian region, using four questions added to a newly developed paediatric immunization database with single records for each individual. Data were collected at primary-care centres. Breast-feeding definitions and 24 h recall as recommended by the WHO were used. Direct age standardization was applied to breast-feeding rates. Record linkage with the medical birth database was attempted to identify maternal, pregnancy and delivery factors associated with full breast-feeding rates at 3 and 5 months of age. Data on breast-feeding were collected for 14044 infants. The mean regional full breast-feeding rate at 3 months was 52 %; differences between local health authorities ranged from 42 to 62 %. At 5 months of age, the mean regional full breast-feeding rate dropped to 33 % (range between local health authorities: 26 to 46 %). Record linkage with the birth certificate database was successful for 93 % of records. Total observations more than doubled with respect to the previous regional survey. The new monitoring system implemented in 2015 in Emilia-Romagna region, totally integrated with the immunization database, has proved to be feasible, sustainable and more efficient than the previous one. This system can be a model for other regions and countries where the vast majority of mothers obtain vaccinations from public health facilities and that already have an immunization database in place.

Investigation on Effect of Material Hardness in High Speed CNC End Milling Process.

PubMed

Dhandapani, N V; Thangarasu, V S; Sureshkannan, G

2015-01-01

This research paper analyzes the effects of material properties on surface roughness, material removal rate, and tool wear on high speed CNC end milling process with various ferrous and nonferrous materials. The challenge of material specific decision on the process parameters of spindle speed, feed rate, depth of cut, coolant flow rate, cutting tool material, and type of coating for the cutting tool for required quality and quantity of production is addressed. Generally, decision made by the operator on floor is based on suggested values of the tool manufacturer or by trial and error method. This paper describes effect of various parameters on the surface roughness characteristics of the precision machining part. The prediction method suggested is based on various experimental analysis of parameters in different compositions of input conditions which would benefit the industry on standardization of high speed CNC end milling processes. The results show a basis for selection of parameters to get better results of surface roughness values as predicted by the case study results.

Investigation on Effect of Material Hardness in High Speed CNC End Milling Process

PubMed Central

Dhandapani, N. V.; Thangarasu, V. S.; Sureshkannan, G.

2015-01-01

This research paper analyzes the effects of material properties on surface roughness, material removal rate, and tool wear on high speed CNC end milling process with various ferrous and nonferrous materials. The challenge of material specific decision on the process parameters of spindle speed, feed rate, depth of cut, coolant flow rate, cutting tool material, and type of coating for the cutting tool for required quality and quantity of production is addressed. Generally, decision made by the operator on floor is based on suggested values of the tool manufacturer or by trial and error method. This paper describes effect of various parameters on the surface roughness characteristics of the precision machining part. The prediction method suggested is based on various experimental analysis of parameters in different compositions of input conditions which would benefit the industry on standardization of high speed CNC end milling processes. The results show a basis for selection of parameters to get better results of surface roughness values as predicted by the case study results. PMID:26881267

The analysis of soil characteristics near the animal feed and fertiliser mill using the Bartington

NASA Astrophysics Data System (ADS)

Azhari, Adinda Syifa; Agustine, Eleonora; Fitriani, Dini

2017-07-01

Industrial activities have the potential to make pollution in agricultural land, the waste contains poisonous material and it is dangerous for the environment. In general, waste from factory is dumped directly into the river, but in the current study an object that is going to be conscientious is soil on around mill. There are three sampling sites are around fertilizer plants, feed mills and original uncontaminated soil. This research has been conducted to assess the impact of pollution resulting from the two mills for the environment. Physical parameter that used is magnetic susceptibility. Sampling was conducted using the method of magnetic susceptibility of rock to see the value of low frequency (lf) and shows Frequency Dependent (fd%) using the MS2B Bartington. The results from this study is at a location close to the fertilizer plant at a depth of 0-5 cm has a value susceptibility low frequency ( lf)=187.1 - 494.8, fd (%)=1.37 - 2:46, at a depth of 6-10 cm susceptibility value of low frequency (lf)=211 - 832.7,fd (%)=1.04 - 5.37. Results in the area of animal feed mill at a depth of 0-5 cm value susceptibility low frequency (lf)=111.9 - 325.7, fd (%)=0.8 - 3.57, at a depth of 6-10 cm value susceptibility low frequency (lf)=189.2 to 386.8,fd (%)=0.33 - 3.7. Results in the original soil at a depth of 0-5 cm susceptibility value of low frequency (lf)=1188.7 - 2237.8,fd (%)=2.75 - 4.65, at a depth of 6-10 cm value susceptibility low frequency (lf)=977.7 - 2134.7,fd (%)=3.06 - 6.21. The highest value was in the arealf original, shows the area has a high mineral content andlf lows were in the area near the factory fodder it is caused by high pollution, resulting in lower mineral content in the soil.

Effects of milk flow on the physiological and behavioural responses to feeding in an infant with hypoplastic left heart syndrome.

PubMed

Pados, Britt F; Thoyre, Suzanne M; Estrem, Hayley H; Park, Jinhee; Knafl, George J; Nix, Brant

2017-01-01

Infants with hypoplastic left heart syndrome often experience difficulty with oral feeding, which contributes to growth failure, morbidity, and mortality. In response to feeding difficulty, clinicians often change the bottle nipple, and thus milk flow rate. Slow-flow nipples have been found to reduce the stress of feeding in other fragile infants, but no research has evaluated the responses of infants with hypoplastic left heart syndrome to alterations in milk flow. The purpose of this study was to evaluate the physiological and behavioural responses of an infant with hypoplastic left heart syndrome to bottle feeding with either a slow-flow (Dr. Brown's Preemie) or a standard-flow (Dr. Brown's Level 2) nipple. A single infant was studied for three feedings: two slow-flow and one standard-flow. Oral feeding, whether with a slow-flow or a standard-flow nipple, was distressing for this infant. During slow-flow feeding, she experienced more coughing events, whereas during standard-flow she experienced more gagging. Disengagement and compelling disorganisation were most common during feeding 3, that is slow-flow, which occurred 2 days after surgical placement of a gastrostomy tube. Clinically significant changes in heart rate, oxygen saturation, and respiratory rate were seen during all feedings. Heart rate was higher during standard-flow and respiratory rate was higher during slow-flow. Further research is needed to examine the responses of infants with hypoplastic left heart syndrome to oral feeding and to identify strategies that will support these fragile infants as they learn to feed. Future research should evaluate an even slower-flow nipple along with additional supportive feeding strategies.

40 CFR 63.453 - Monitoring requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... process wastewater feed rate; (2) The steam feed rate; and (3) The process wastewater column feed...: (A) Composite daily sample of outlet soluble BOD5 concentration to monitor for maximum daily and...

40 CFR 63.453 - Monitoring requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... process wastewater feed rate; (2) The steam feed rate; and (3) The process wastewater column feed...: (A) Composite daily sample of outlet soluble BOD5 concentration to monitor for maximum daily and...

40 CFR 63.453 - Monitoring requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... process wastewater feed rate; (2) The steam feed rate; and (3) The process wastewater column feed...: (A) Composite daily sample of outlet soluble BOD5 concentration to monitor for maximum daily and...

Optimum surface roughness prediction for titanium alloy by adopting response surface methodology

NASA Astrophysics Data System (ADS)

Yang, Aimin; Han, Yang; Pan, Yuhang; Xing, Hongwei; Li, Jinze

Titanium alloy has been widely applied in industrial engineering products due to its advantages of great corrosion resistance and high specific strength. This paper investigated the processing parameters for finish turning of titanium alloy TC11. Firstly, a three-factor central composite design of experiment, considering the cutting speed, feed rate and depth of cut, are conducted in titanium alloy TC11 and the corresponding surface roughness are obtained. Then a mathematic model is constructed by the response surface methodology to fit the relationship between the process parameters and the surface roughness. The prediction accuracy was verified by the one-way ANOVA. Finally, the contour line of the surface roughness under different combination of process parameters are obtained and used for the optimum surface roughness prediction. Verification experimental results demonstrated that material removal rate (MRR) at the obtained optimum can be significantly improved without sacrificing the surface roughness.

Prediction of Cutting Force in Turning Process-an Experimental Approach

NASA Astrophysics Data System (ADS)

Thangarasu, S. K.; Shankar, S.; Thomas, A. Tony; Sridhar, G.

2018-02-01

This Paper deals with a prediction of Cutting forces in a turning process. The turning process with advanced cutting tool has a several advantages over grinding such as short cycle time, process flexibility, compatible surface roughness, high material removal rate and less environment problems without the use of cutting fluid. In this a full bridge dynamometer has been used to measure the cutting forces over mild steel work piece and cemented carbide insert tool for different combination of cutting speed, feed rate and depth of cut. The experiments are planned based on taguchi design and measured cutting forces were compared with the predicted forces in order to validate the feasibility of the proposed design. The percentage contribution of each process parameter had been analyzed using Analysis of Variance (ANOVA). Both the experimental results taken from the lathe tool dynamometer and the designed full bridge dynamometer were analyzed using Taguchi design of experiment and Analysis of Variance.

A Simple Visual Estimation of Food Consumption in Carnivores

PubMed Central

Potgieter, Katherine R.; Davies-Mostert, Harriet T.

2012-01-01

Belly-size ratings or belly scores are frequently used in carnivore research as a method of rating whether and how much an animal has eaten. This method provides only a rough ordinal measure of fullness and does not quantify the amount of food an animal has consumed. Here we present a method for estimating the amount of meat consumed by individual African wild dogs Lycaon pictus. We fed 0.5 kg pieces of meat to wild dogs being temporarily held in enclosures and measured the corresponding change in belly size using lateral side photographs taken perpendicular to the animal. The ratio of belly depth to body length was positively related to the mass of meat consumed and provided a useful estimate of the consumption. Similar relationships could be calculated to determine amounts consumed by other carnivores, thus providing a useful tool in the study of feeding behaviour. PMID:22567086

The effect of qat chewing and other factors on breast-feeding and child survival in a Yemeni society

PubMed Central

Mansoub, Mohammed Al; Omer, Rahab; Omer, Rasha; Shadli, Muna; Williams, Rachael

2011-01-01

In a survey conducted in Dammar, Republic of Yemen, 755 mothers were interviewed to investigate the patterns and factors affecting childhood feeding practices. It was found that full breast-feeding rate (41.8%) and timely introduction of complementary feeding rate (57.4%) were low, bottle-feeding rate (25.1%) was high and timely first suckling rate was zero. It was also found that the more educated and older mothers tended to wean their children earlier than illiterate and younger mothers. A significant association between regular frequent qat chewing and history of child death was observed. The implications of these findings were discussed. PMID:27493314

The effect of qat chewing and other factors on breast-feeding and child survival in a Yemeni society.

PubMed

Ibrahim Ali Omer, Mohammed; Mansoub, Mohammed Al; Omer, Rahab; Omer, Rasha; Shadli, Muna; Williams, Rachael

2011-01-01

In a survey conducted in Dammar, Republic of Yemen, 755 mothers were interviewed to investigate the patterns and factors affecting childhood feeding practices. It was found that full breast-feeding rate (41.8%) and timely introduction of complementary feeding rate (57.4%) were low, bottle-feeding rate (25.1%) was high and timely first suckling rate was zero. It was also found that the more educated and older mothers tended to wean their children earlier than illiterate and younger mothers. A significant association between regular frequent qat chewing and history of child death was observed. The implications of these findings were discussed.

Breast-feeding patterns and factors determining exclusive breast-feeding.

PubMed

Koosha, A; Hashemifesharaki, R; Mousavinasab, N

2008-12-01

Breast-feeding is a major determinant of infants' health and survival. The aim of this study was to examine breast-feeding patterns and the role of some factors on exclusive breast-feeding. The study was done at the Health Centre of Community Oriented Medical Education of Zanjan City, Iran. Mothers of 650 infants younger than one year of age were interviewed directly by healthcare providers. The necessary information was recorded on pre-structured questionnaires, and the feeding patterns of all infants were determined. The rate of breast-feeding was greater than 92 percent during the first year of life. Exclusive breast-feeding rate in the first five days of life was 82 percent, but it declined to 44 percent at the first month. The chance of exclusive breast-feeding was higher in infants who were on demand feeding (odds ratio [OR] 2.6), breastfed more than eight times per day (OR 2.23), and their birth weight ranged from 2.5 to 4 kg (OR 2.16). This chance was less among infants exposed to pacifiers (OR 2.62) and with the numbers of deliveries equal to or more than three (OR 2.25). The rates of breast-feeding initiation and its duration at six and 12 months were higher than the national goal. The rate of exclusive breast-feeding was nearly 44 percent. It seems necessary to elucidate the role of other factors, such as socioeconomic status, on exclusive breast-feeding.

The effect of feed rate and recycle rate variable on leaching process of Na2Zro3 with HCl in continuous stirred tank reactor (CSTR) series

NASA Astrophysics Data System (ADS)

Palupi, Bekti; Supranto, Sediawan, Wahyudi Budi; Setyadji, Moch.

2017-05-01

This time, the natural resources of zircon sand is processed into several zirconium products which is utilized for various industries, such as ceramics, glass industry, metal industry and nuclear industry. The process of zircon sand into zirconium products through several stages, one of them is leaching process of Na2ZrO3 with HCl. In this research, several variations of recycle-rate/feed-rate had been done to determine the effect on leaching process. The leaching was processed at temperature of 90°C, ratio of Na2ZrO3:HCl = 1g:30mL, and 142 rotary per minute of stirring speed for 30 minutes with variation of recycle-rate/feed-rate such as 0.478, 0.299, 0.218, 0.171 and 0.141. The diameter size of Na2ZrO3 powder that used are 0.088 to 0.149 mm. This process was carried out in Continuous Stirred Tank Reactor (CSTR) series with recycle. Based on this research, the greater of the recycle-rate/feed-rate variable, the obtained Zr recovery decreased. The correlation between recycle-rate/feed-rate and Zr recovery is shown by the equation y = -146.91x + 103.51, where y is the Zr recovery and x is the recycle-rate/feed-rate. The highest Zr recovery was 90.52% obtained at recycle-rate/feed-rate 0.141. The mathematical modeling involving the probability model P(r) = 2β2r2 exp(-βr2) can be applied to this leaching process with Sum of Squared Errors (SSE) values in the range of 6×10-7 - 7×10-6.

Right Whale Diving and Foraging Behavior in the Southwestern Gulf of Maine

DTIC Science & Technology

2011-09-30

whale sits atop a relatively simple food chain consisting only of phytoplankton, copepods , and whales that can serve as a convenient model to study...influence the vertical distribution of copepods . APPROACH Tagging, tracking, and sampling around right whales was accomplished with two...above this depth feeding on a shallow layer of copepods (Figure 3f). We were able to confirm that this tagged whale was feeding by observing its

Condition monitoring of turning process using infrared thermography technique - An experimental approach

NASA Astrophysics Data System (ADS)

Prasad, Balla Srinivasa; Prabha, K. Aruna; Kumar, P. V. S. Ganesh

2017-03-01

In metal cutting machining, major factors that affect the cutting tool life are machine tool vibrations, tool tip/chip temperature and surface roughness along with machining parameters like cutting speed, feed rate, depth of cut, tool geometry, etc., so it becomes important for the manufacturing industry to find the suitable levels of process parameters for obtaining maintaining tool life. Heat generation in cutting was always a main topic to be studied in machining. Recent advancement in signal processing and information technology has resulted in the use of multiple sensors for development of the effective monitoring of tool condition monitoring systems with improved accuracy. From a process improvement point of view, it is definitely more advantageous to proactively monitor quality directly in the process instead of the product, so that the consequences of a defective part can be minimized or even eliminated. In the present work, a real time process monitoring method is explored using multiple sensors. It focuses on the development of a test bed for monitoring the tool condition in turning of AISI 316L steel by using both coated and uncoated carbide inserts. Proposed tool condition monitoring (TCM) is evaluated in the high speed turning using multiple sensors such as Laser Doppler vibrometer and infrared thermography technique. The results indicate the feasibility of using the dominant frequency of the vibration signals for the monitoring of high speed turning operations along with temperatures gradient. A possible correlation is identified in both regular and irregular cutting tool wear. While cutting speed and feed rate proved to be influential parameter on the depicted temperatures and depth of cut to be less influential. Generally, it is observed that lower heat and temperatures are generated when coated inserts are employed. It is found that cutting temperatures are gradually increased as edge wear and deformation developed.

Effect of immune-enhancing diets on the outcomes of patients after major burns

PubMed Central

Mahmoud, W.H..; Mostafa, W.; Abdel-Khalek, A.H.; Shalaby, H.

2014-01-01

Summary The use of immune-enhancing diets (IEDs) has been shown to be beneficial in some categories of critically ill patients. This study aimed to evaluate the effect of early enteral feeding supplemented with glutamine and omega-3 fatty acids, as immune-enhancing diets, on the outcomes of patients after major burns. Forty thermally injured adult patients with 30-50% total body surface area (TBSA) burns, including deep areas ranging from 5-20%, were randomized into a prospective, double-blind, controlled clinical trial. They were placed into two equal groups: group A (IED group), in which patients received early enteral feeding supplemented with glutamine and omega-3 fatty acids as immune-enhancing diets; and group B (control group), in which patients received early enteral feeding not supplemented with immune-enhancing diets. Laboratory assessment of serum albumin, serum C-reactive protein, total lymphocytic count and serum immunoglobulins (IgA, IgG and IgM) was performed at admission, and on days 4, 7 and 14. Finally, outcomes were assessed by monitoring the survival rate, the length of hospital stay and the incidence of infection. There were no significant differences between the IED and control group regarding age (28.7±5.32 versus 29.85±5.94), sex, weight, %TBSA (37.75±4.4 versus 38.3±4.84) and %burn depth (11.7±2.36 versus 10.7±2.036). The incidence of infection (2 versus 8) and the length of hospital stay (16.3±0.92 days versus 17.95±2.96 days) were decreased significantly in the IED group versus the control group. There was no significant difference between the survival rates in both groups as there was only one death in the control group. Thanks to IEDs, patient outcome was improved and infectious morbidity and length of hospital stay were reduced, but there was no effect on the survival rates following major burns. PMID:26336366

Thermoregulation in larval aggregations of carrion-feeding blow flies (Diptera: Calliphoridae)

USGS Publications Warehouse

Slone, D.H.; Gruner, Susan V.

2007-01-01

The growth and development of carrion-feeding calliphorid (Diptera Calliphoridae) larvae, or maggots, is of great interest to forensic sciences, especially for estimation of a postmortem interval (PMI). The development rate of calliphorid larvae is influenced by the temperature of their immediate environment. Heat generation in larval feeding aggregations (=maggot masses) is a well-known phenomenon, but it has not been quantitatively described. Calculated development rates that do not include internally generated temperatures will result in overestimation of PMI. Over a period of 2.5 yr, 80 pig, Sus scrofa L., carcasses were placed out at study sites in north central Florida and northwestern Indiana. Once larval aggregations started to form, multiple internal and external temperatures, and weather observations were taken daily or every few days between 1400 and 1800 hours until pupation of the larvae. Volume of each aggregation was determined by measuring surface area and average depth. Live and preserved samples of larvae were taken for species identification. The four most common species collected were Lucilia coeruleiviridis (=Phaenicia) (Macquart) (77%), Cochliomyia macellaria (F.) (8.3%), Chrysomya rufifaces (Macquart) (7.7%), and Phormia regina (Meigen) (5.5%). Statistical analyses showed that 1) volume of a larval mass had a strong influence on its temperature, 2) internal temperatures of masses on the ground were influenced by soil temperature and mass volume, 3) internal temperatures of masses smaller than 20 cm3 were influenced by ambient air temperature and mass volume, and 4) masses larger than 20 cm3 on the carcass had strongly regulated internal temperatures determined only by the volume of the mass, with larger volumes associated with higher temperatures. Nonsignificant factors included presence of rain or clouds, shape of the aggregation, weight of the carcass, species composition of the aggregation, time since death, or season.

Breast-feeding attitudes and practices among Vietnamese mothers in Ho Chi Minh City.

PubMed

Lundberg, Pranee C; Ngoc Thu, Trieu Thi

2012-04-01

to describe breast-feeding attitudes and practices among Vietnamese women in Ho Chi Minh City. a descriptive qualitative study was used. The theory of planned behaviour provided the conceptual framework. the Well-baby Clinic, Department of Obstetrics and Gynaecology of a university hospital in Ho Chi Minh City, Vietnam. 23 voluntary Vietnamese mothers. semi-structured in-depth interview with five open-ended questions and observation was used. The interviews were tape-recorded and transcribed verbatim. The data from the interviews and observations were analysed by use of content analysis. five categories of breast-feeding attitudes and practices were identified: breast-feeding best but not exclusive, cultural and traditional beliefs, infant feeding as a learning process, factors influencing decision to breast feed, and intention to feed the child. cultural and traditional beliefs and practices, and socio-economic situation, influenced the Vietnamese mothers' breast feeding. Health-care professionals should consider cultural context and socio-economic issues when preparing infant feeding education and intervention programmes. Appropriate knowledge about cultural values should be included in health-care education in order to provide culturally congruent care to Vietnamese mothers in Vietnam as well as in Western countries. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effect of feeding silkworm on growth performance and feed efficiency of snakehead (Channa striata)

NASA Astrophysics Data System (ADS)

Firmani, U.; Lono

2018-04-01

The snakehead, Chana striata is a carnivorous freshwater fish and widely distributed in Asia. High demand of this fish has been triggering many aquaculturist to culture C. stiata. Feed was the important factor for fish growth. Silkworm has high protein content, low fat and can be used as natural feed for finfish. This study investigate the silkworm feed in C. striata. The treatment of this research were A (100 % pellet); B (100 % silkworm); C (combination of 75 % pellet and 25 % silkworm); D (combination of 50 % pellet and 50 % silkworm); and E (combination of 25 % pellet and 75 % silkworm). The variables measured in this study were relatif growth, specific growth rate, feed efficiency, feed conversion ratio, and survival rate. The result show that silkworm gave the high growth performance, feed efficiency and survival rate of the snakehead (Channa striata) compared with the control.

Breast feeding initiation rate across Western countries: does religion matter? An ecological study

PubMed Central

Cohen, Emmanuel; Kramer, Michael S

2016-01-01

Background Breast feeding initiation rates remain below 80% in some Western countries. Many individual-level determinants are known; however, less is known regarding cultural and societal determinants, such as religion, that could explain population-level variations. We examined the correlations of the proportions of Catholics and Protestants with the breast feeding initiation rates across and within Western countries. Methods Using publicly available data, we carried out an ecological study comparing the proportions of Catholics and Protestants with the rates of breast feeding initiation. We correlated data at the country level, and additionally explored within-country data in five Western countries: France (Departments), Ireland (counties), the UK (countries), Canada (provinces) and the USA (states). Our analyses accounted for human development index, gross domestic product and population density. Results We observed a negative correlation (r=−0.30) between the proportion of Catholics and the rate of breast feeding initiation in Western countries. This correlation was consistent when using within-country data in France (r=−0.27), Ireland (r=−0.23), the UK (r=−0.79) and Canada (r=−0.62). In the USA, the positive correlation (r=0.26) between a state's proportion of Catholics and its breast feeding initiation rate was confounded by race, education and socioeconomic status (SES). After controlling for education and SES, the state proportion of non-Hispanic white Catholics was negatively correlated (r=−0.29) with the rate of breast feeding initiation. Conclusions In this ecological study, we found consistent negative correlations between Catholicism and breast feeding initiation rates. Qualitative and quantitative studies at the individual level are needed to confirm and explain our findings. Our results suggest that women living in a country or region where Catholicism has historically dominated are less likely to initiate breast feeding, and that breast feeding promotion policies should be adapted to better fit populations' cultural and religious norms. PMID:28588983

Breast feeding initiation rate across Western countries: does religion matter? An ecological study.

PubMed

Bernard, Jonathan Y; Cohen, Emmanuel; Kramer, Michael S

2016-01-01

Breast feeding initiation rates remain below 80% in some Western countries. Many individual-level determinants are known; however, less is known regarding cultural and societal determinants, such as religion, that could explain population-level variations. We examined the correlations of the proportions of Catholics and Protestants with the breast feeding initiation rates across and within Western countries. Using publicly available data, we carried out an ecological study comparing the proportions of Catholics and Protestants with the rates of breast feeding initiation. We correlated data at the country level, and additionally explored within-country data in five Western countries: France (Departments), Ireland (counties), the UK (countries), Canada (provinces) and the USA (states). Our analyses accounted for human development index, gross domestic product and population density. We observed a negative correlation (r=-0.30) between the proportion of Catholics and the rate of breast feeding initiation in Western countries. This correlation was consistent when using within-country data in France (r=-0.27), Ireland (r=-0.23), the UK (r=-0.79) and Canada (r=-0.62). In the USA, the positive correlation (r=0.26) between a state's proportion of Catholics and its breast feeding initiation rate was confounded by race, education and socioeconomic status (SES). After controlling for education and SES, the state proportion of non-Hispanic white Catholics was negatively correlated (r=-0.29) with the rate of breast feeding initiation. In this ecological study, we found consistent negative correlations between Catholicism and breast feeding initiation rates. Qualitative and quantitative studies at the individual level are needed to confirm and explain our findings. Our results suggest that women living in a country or region where Catholicism has historically dominated are less likely to initiate breast feeding, and that breast feeding promotion policies should be adapted to better fit populations' cultural and religious norms.

[Effects of breast-feeding education and support services on breast-feeding rates and infant's growth].

PubMed

Jang, Gun-Ja; Kim, Sun-Hee

2010-04-01

This study was done to investigate the effects of breast-feeding education and support services on rate of breast-feeding three and six months after birth, and the effect on infant's growth (weight, height, body mass index [BMI]). The experimental group which had both education and support services was compared with the control group which had only breast-feeding education. This study was a quasi-experimental study with a time-series design. The participants were 39 mothers who were hospitalized for childbirth. Twenty mother were assigned to the experimental group and 19 mothers, to the control group. The breast feeding education was done during hospitalization, and support services were provided once a week after discharge for a month (a total 4 times) by a maternity ward nurse. Data regarding breastfeeding rate at one month after childbirth was collected by phone call; the breast-feeding rates at three and six months after childbirth were collected in a visit to the families. The child's weight and height were also measured during the visit. The experimental group had a statistically significant higher rate for frequency of breast-feeding at one, three and six months after childbirth than the control group. However, there was no meaningful difference between the two groups for infant growth. The results of this study suggest that breast-feeding education is helpful for a start, but support services are also necessary to sustain breast-feeding.

Ecology and pathogenicity of gastrointestinal Streptococcus bovis.

PubMed

Herrera, Paul; Kwon, Young Min; Ricke, Steven C

2009-01-01

Streptococcus bovis is an indigenous resident in the gastrointestinal tracts of both humans and animals. S. bovis is one of the major causes of bacterial endocarditis and has been implicated in the incidence of human colon cancer, possibly due to chronic inflammatory response at the site of intestinal colonization. Certain feeding regimens in ruminants can lead to overgrowth of S. bovis in the rumen, resulting in the over-production of lactate and capsular polysaccharide causing acute ruminal acidosis and bloat, respectively. There are multiple strategies in controlling acute lactic acidosis and bloat. The incidence of the two diseases may be controlled by strict dietary management. Gradual introduction of grain-based diets and the feeding of coarsely chopped roughage decrease the incidence of the two disease entities. Ionophores, which have been used to enhance feed conversion and growth rate in cattle, have been shown to inhibit the growth of lactic acid bacteria in the rumen. Other methods of controlling lactic acid bacteria in the ruminal environment (dietary supplementation of long-chain fatty acids, induction of passive and active immune responses to the bacteria, and the use of lytic bacteriophages) have also been investigated. It is anticipated that through continued in-depth ecological analysis of S. bovis the characteristics responsible for human and animal pathogenesis would be sufficiently identified to a point where more effective control strategies for the control of this bacteria can be developed.

Insecticidal Potential of Defense Metabolites from Ocimum kilimandscharicum against Helicoverpa armigera

PubMed Central

Thulasiram, Hirekodathakallu V.; Kulkarni, Mahesh J.; Giri, Ashok P.

2014-01-01

Genus Ocimum contains a reservoir of diverse secondary metabolites, which are known for their defense and medicinal value. However, the defense-related metabolites from this genus have not been studied in depth. To gain deeper insight into inducible defense metabolites, we examined the overall biochemical and metabolic changes in Ocimum kilimandscharicum that occurred in response to the feeding of Helicoverpa armigera larvae. Metabolic analysis revealed that the primary and secondary metabolism of local and systemic tissues in O. kilimandscharicum was severely affected following larval infestation. Moreover, levels of specific secondary metabolites like camphor, limonene and β-caryophyllene (known to be involved in defense) significantly increased in leaves upon insect attack. Choice assays conducted by exposing H. armigera larvae on O. kilimandscharicum and tomato leaves, demonstrated that O. kilimandscharicum significantly deters larval feeding. Further, when larvae were fed on O. kilimandscharicum leaves, average body weight decreased and mortality of the larvae increased. Larvae fed on artificial diet supplemented with O. kilimandscharicum leaf extract, camphor, limonene and β-caryophyllene showed growth retardation, increased mortality rates and pupal deformities. Digestive enzymes of H. armigera - namely, amylase, protease and lipase- showed variable patterns after feeding on O. kilimandscharicum, which implies striving of the larvae to attain required nutrition for growth, development and metamorphosis. Evidently, selected metabolites from O. kilimandscharicum possess significant insecticidal activity. PMID:25098951

Exclusive and any breast-feeding rates of Pacific infants in Auckland: data from the Pacific Islands Families First Two Years of Life Study.

PubMed

Schluter, Philip J; Carter, Sarnia; Percival, Teuila

2006-09-01

To present current breast-feeding rates for Pacific infants resident in New Zealand. Reasons for the introduction of complementary liquid foods were also explored. A longitudinal study using hospital discharge summary records and maternal home interviews undertaken at 6 weeks, 12 and 24 months postpartum. Turnbull's non-parametric survival analysis was used to model exclusive breast-feeding rates. Auckland, New Zealand. The cohort comprised 1376 infants at 6 weeks, 1223 infants at 12 months and 1142 infants at 24 months. Exclusive breast-feeding rates at hospital discharge, 6 weeks, 3 and 6 months postpartum were 84% (95% confidence interval (CI): 80-88%), 49% (95% CI: 43-55%), 37% (95% CI: 32-42%) and 9% (95% CI: 7-11%), respectively. Significant ethnic difference existed, with Samoan mothers having higher exclusive breast-feeding rates than Tongan mothers (P = 0.002). The percentage of infants receiving any breast milk at hospital discharge, 6 weeks, 12 and 24 months was 96% (95% CI: 94-97%), 95% (95% CI: 94-96%), 31% (95% CI: 28-34%) and 15% (95% CI: 13-17%), respectively. Again ethnic differences emerged. Common reasons cited for discontinuation of exclusive breast-feeding included uncertainty of breast milk supply (56%), problems with breasts (30%) and difficulties breast-feeding in work or educational environments (26%). However, 691 (50%) mothers sought no advice about their breast-feeding concerns within the first six weeks of life. Exclusive breast-feeding rates for Pacific infants are ethnically heterogeneous, have declined since the 1990s and fall short of the World Health Organization recommendations. The principal reasons cited for exclusive breast-feeding discontinuation echo those reported over a decade ago.

Using quality improvement to promote breast-feeding in a local health department.

PubMed

Wright, Sarah S; Lea, C Suzanne; Holloman, Roxanne; Cornett, Amanda; Harrison, Lisa Macon; Randolph, Greg D

2012-01-01

In 2008, breast-feeding initiation and continuation rates in Beaufort County, North Carolina, were lower than statewide rates. A quality improvement (QI) project was initiated to increase breast-feeding rates by enhancing the overall environment that supports breast-feeding at the Beaufort County Health Department. This case study describes one of the first QI initiatives implemented through the North Carolina Center for Public Health Quality QI training program, conducted in 2009. The aim of this project was to improve the health and wellness of mothers and infants in Beaufort County by promoting breast-feeding among Beaufort County Health Department Women, Infants and Children (WIC) clients. Using QI tools, 4 new approaches to breast-feeding promotion were tested and implemented: creating a nurturing location to breast-feed while at the health department, actively telephoning new mothers to provide breast-feeding support, incentivizing adoption of educational messages by providing a breast-feeding tote bag, and promoting new WIC food packages. These enhancements involved staff in QI planning and implementation and correlated with improved breast-feeding initiation for WIC clients during the year following project completion.

The effect of the baby-friendly hospital initiative on long-term breast feeding.

PubMed

Duyan Camurdan, A; Ozkan, S; Yüksel, D; Pasli, F; Sahin, F; Beyazova, U

2007-08-01

The aim of this study was to evaluate the effects of 'baby-friendly hospital initiative' (BFHI) on breast feeding. In the four consecutive months after BFHI in Gazi University Hospital (November 2002-February 2003), breast feeding status until the second year of life in 297 babies, born in the same hospital was compared with the values of 258 babies born before BFHI (November 2001-February 2002). The exclusive breast feeding rate in the first 6 months was higher in the babies born after BFHI. Cox regression analysis revealed that BFHI increases the duration of breast feeding 1.5 times. At the end of the second year, cumulative rate of breast feeding was higher in the group after-BFHI (p=0.0036). The rate of breast feeding was increased by BFHI implementation.

Bottle-feeding histories of preterm infants.

PubMed

Pickler, R H; Mauck, A G; Geldmaker, B

1997-01-01

To describe the bottle-feeding histories of preterm infants and determine physical indices related to and predictive of bottle-feeding initiation and progression. Ex post facto. Academic medical center. A convenience sample of 40 preterm infants without concomitant cardiac, gastrointestinal, or cognitive impairment. Postconceptional age at first bottle-feeding, full bottle-feeding, and discharge. The morbidity rating, using the Neonatal Medical Index (NMI), was most strongly correlated with postconceptional age at first bottle-feeding (r = .34, p < .05), full bottle-feeding (r = .65, p < .01), and discharge (r = .55, p < .05). The morbidity rating also accounted for 12%, 42%, and 30% of the variance in postconceptional age at first bottle-feeding, full bottle-feeding, and discharge, respectively. The NMI may be a useful tool for predicting the initiation and progression of bottle-feeding in preterm infants.

Artificial neural network (ANN)-based prediction of depth filter loading capacity for filter sizing.

PubMed

Agarwal, Harshit; Rathore, Anurag S; Hadpe, Sandeep Ramesh; Alva, Solomon J

2016-11-01

This article presents an application of artificial neural network (ANN) modelling towards prediction of depth filter loading capacity for clarification of a monoclonal antibody (mAb) product during commercial manufacturing. The effect of operating parameters on filter loading capacity was evaluated based on the analysis of change in the differential pressure (DP) as a function of time. The proposed ANN model uses inlet stream properties (feed turbidity, feed cell count, feed cell viability), flux, and time to predict the corresponding DP. The ANN contained a single output layer with ten neurons in hidden layer and employed a sigmoidal activation function. This network was trained with 174 training points, 37 validation points, and 37 test points. Further, a pressure cut-off of 1.1 bar was used for sizing the filter area required under each operating condition. The modelling results showed that there was excellent agreement between the predicted and experimental data with a regression coefficient (R 2 ) of 0.98. The developed ANN model was used for performing variable depth filter sizing for different clarification lots. Monte-Carlo simulation was performed to estimate the cost savings by using different filter areas for different clarification lots rather than using the same filter area. A 10% saving in cost of goods was obtained for this operation. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1436-1443, 2016. © 2016 American Institute of Chemical Engineers.

Role of kangaroo mother care in growth and breast feeding rates in very low birth weight (VLBW) neonates: a systematic review.

PubMed

Sharma, Deepak; Farahbakhsh, Nazanin; Sharma, Sweta; Sharma, Pradeep; Sharma, Akash

2017-03-27

To evaluate the role of kangaroo mother care (KMC) on growth and breast feeding rates in very low birth weight (VLBW) neonates. A literature search was done to identify eligible studies using various electronic database searches including PubMed and EMBASE, various Web of Science including Scopus, Index Copernicus, African Index Medicus (AIM), Thomson Reuters (ESCI), Chemical Abstracts Service (CAS), SCIWIN (Scientific World Index), Google Scholar, Latin American and Caribbean Health Sciences Information System (LILACS), Index Medicus for the Eastern Mediterranean Region (IMEMR), Index Medicus for the South-East Asian Region (IMSEAR), and Western Pacific Region Index Medicus (WPRIM) and various clinical trial registries. Thirteen studies that evaluated the role of KMC in VLBW infants in improvement of growth outcome (weight/length/head circumference) or breast feeding rates as their primary or secondary outcome, were included in this systematic review. Seven studies evaluated both growth and breast feeding rates, four studies evaluated breast feeding rates and two studies evaluated growth outcome. All included studies except one either showed positive effect or no effect on growth and breast feeding rates. KMC has a positive effect on growth of the VLBW infants and also leads to increase in the breast-feeding rates. KMC should be an integral part of neonatal care and should be promoted as an essential newborn care component.

Effect of passion fruit seed meal on growth performance, carcass, and blood characteristics in starter pigs.

PubMed

Fachinello, Marcelise Regina; Pozza, Paulo Cesar; Moreira, Ivan; Carvalho, Paulo Levi Oliveira; Castilha, Leandro Dalcin; Pasquetti, Tiago Junior; Esteves, Lucas Antonio Costa; Huepa, Laura Marcela Diaz

2015-10-01

Two experiments were carried out in Paraná State, Brazil, to evaluate the nutritional value of passion fruit seed meal (PFM) and to study the effect of PFM on growth performance, carcass, and blood characteristics in starter pigs (Topigs 20 × Tybor). In experiment 1, 25 castrated males, averaging 19.1-kg body weight, were individually fed in a completely randomized block design, consisting of five treatments and five replicates and an experimental period that lasted 14 days. In experiment 2, a total of 60 pigs (30 females and 30 castrated males) were distributed in a randomized block design with five treatments, six replications, and two animals per experimental unit and 90 days of experimentation. For both experiments, the same PFM inclusion rates were used in the experimental diets, namely, 0, 4, 8, 12, and 16 %. The metabolizable energy of PFM was estimated to be 15.0 MJ/kg. Inclusion of PFM at any level did not affect average daily gain, daily feed intake, feed/gain ratio, backfat thickness, loin depth, and plasma or blood components. It is concluded that passion fruit seed meal for swine in the starting phase can be added at a rate of up to 16 % in the diet without any negative effects on growth performance, carcass, and blood characteristics in starter commercial line pigs.

A qualitative study of infant feeding decisions among low-income women in the Republic of Ireland.

PubMed

Shortt, Emily; McGorrian, Catherine; Kelleher, Cecily

2013-05-01

to explore infant feeding decisions among low-income women living in Ireland to gain an in-depth understanding of the factors, which influence breast feeding initiation and continuation. a descriptive qualitative study using focus groups and semi-structured interviews. community and primary health-care settings in the Republic of Ireland. a convenience sample of 33 low-income mothers was recruited from 2 community programmes and 3 primary health-care centres. six dominant themes were identified using Thematic Analysis. Prior knowledge of infant feeding, especially from experiences of seeing breast- and artificial milk-feeding in the family and the community, influenced feeding choice. Embarrassment and stigma about breast feeding in public places and in some cases in the private sphere were commonly described as barriers to breast feeding. The decision to bottle feed often reflected a balancing of the needs of the mother and the baby, because breast feeding was often perceived as inconvenient and requiring extreme determination. Breast feeding difficulties in the early weeks were frequently described and those who stopped breast feeding early often lacked practical knowledge and experienced support. In terms of health professional support, the mothers favoured a non-pressurised approach along with practical help with breast feeding. there is a need for promotional efforts to normalise breast feeding and for training of health professionals in the provision of appropriate support. Copyright © 2012 Elsevier Ltd. All rights reserved.

Infant feeding experiences of women who were sexually abused in childhood.

PubMed

Wood, Karen; Van Esterik, Penny

2010-04-01

To explore the effects of childhood sexual abuse (CSA) on women's breastfeeding and infant feeding decisions and experiences. Qualitative, participatory study using semistructured in-depth interviews. Tamara's House, a healing centre for women who were sexually abused in childhood, located in Saskatoon, Sask. Six mothers who were sexually abused in childhood. In-depth interviews were conducted and transcribed verbatim. Thematic analysis was iterative and participatory. The emerging themes that resulted from initial analysis by the researchers were presented at a meeting held jointly with academics, survivors, and professionals in the field to achieve consensus. Throughout the process, findings were considered in relation to related literature on breasts, breastfeeding, and CSA. History of CSA complicated the women's infant feeding decisions and experiences. For 2 women, birthing and breastfeeding facilitated healing from the effects of the abuse. Shame, touch, breasts, dissociation, medical care, and healing emerged as analytic themes. A history of CSA can affect a woman's experience of breastfeeding, including acting as a trigger for remembering or reexperiencing the abuse. Women who were sexually abused as children need to experience a sense of safety, acceptance, sensitivity, and understanding. Physicians need to be aware of the effects of CSA on infant feeding and women's health, and might need to be trained in a sensitive-practice approach to working with patients who were sexually abused as children.

Effect of forage inclusion and particle size in diets of neonatal lambs on performance and rumen development.

PubMed

Norouzian, M A; Valizadeh, R

2014-12-01

A slaughter experiment was conducted to determine the effects of alfalfa particle size on rumen morphology and performance of lambs. Twenty-four Balouchi lambs aged 21 days (9.1 ± 1.1 kg) were randomly fed control (diet without alfalfa hay; CON) and mixed rations containing 15% finely ground (FINE; 2 mm) and 15% coarsely chopped alfalfa hay (LONG; 3 to 4 cm). After a 63 days feeding period, nine animals (three per treatment) were slaughtered to obtain ruminal tissue samples for morphological analyses. Alfalfa particle size did not affect (p > 0.05) papillae density, height, width, epithelium depth and surface area. Coarse alfalfa decreased the stratum corneum and increased (p < 0.05) muscle depth compared with fine and control diets. Neither DNA content and nor RNA concentration of rumen tissue was affected by feeding different diets. Forage particle size did not affect the blood concentration of glucose, urea nitrogen (BUN), beta-hydroxybutyric acid (BHBA) and non-esterified fatty acids (NEFA). Dry matter intake and feed conversion ratio were higher for control diet; however, there were no significant differences between treatments for average daily gain. These data suggest that coarse alfalfa significantly reduces the stratum corneum and increases muscularity of rumen wall and tended to better feed conversion ratio. Journal of Animal Physiology and Animal Nutrition © 2014 Blackwell Verlag GmbH.

A Performance Comparison Study of Uncoated and TiAlN Coated Carbide End Mill on Machining of the Al-35Zn Alloy

NASA Astrophysics Data System (ADS)

Bayraktar, S.; Hekimoglu, A. P.; Turgut, Y.; Haciosmanoglu, M.

2018-01-01

In this study, Al-35Zn alloy was produced by permanent mold casting. To investigate the cutting performance of uncoated and TiAlN coated carbide end mills on this alloy, a series of tests were carried out in the CNC vertical machining center at a constant cutting speed, feed rate and depth of cut. The results obtained from the tests showed that uncoated carbide end mill have lower cutting force and surface roughness than TiAlN coated carbide end mill. These observations are discussed in terms of the alloys properties, cutting tool surfaces, and friction and wear behavior between the cutting tool and the material.

Experimental investigation of residual stress distribution during turning of weak stiffness revolving parts

NASA Astrophysics Data System (ADS)

Jiao, Sicheng; Zhang, Chengyan; Liu, Guancheng; Lu, Jiping; Tang, Shuiyuan

2017-08-01

A series of turning experiments have been carried out to study the effect of different cutting speed, feed rate and pre-tightening torque on residual stress distribution during turning of weak stiffness revolving parts. Surface residual stress and the peak residual compressive stress are selected from the typical residual stress distribution profile. The residual stress by turning was measured by X-ray diffraction method. In order to get the distribution of residual stress along depth direction, the specimens need to be etched layer by layer. From this investigation, it can be concluded that it is practicable to control the distribution of residual stress by changing the pre-tightening torque and cutting parameters during turning of weak stiffness revolving parts.

Optimization of process parameters in CNC turning of aluminium alloy using hybrid RSM cum TLBO approach

NASA Astrophysics Data System (ADS)

Rudrapati, R.; Sahoo, P.; Bandyopadhyay, A.

2016-09-01

The main aim of the present work is to analyse the significance of turning parameters on surface roughness in computer numerically controlled (CNC) turning operation while machining of aluminium alloy material. Spindle speed, feed rate and depth of cut have been considered as machining parameters. Experimental runs have been conducted as per Box-Behnken design method. After experimentation, surface roughness is measured by using stylus profile meter. Factor effects have been studied through analysis of variance. Mathematical modelling has been done by response surface methodology, to made relationships between the input parameters and output response. Finally, process optimization has been made by teaching learning based optimization (TLBO) algorithm. Predicted turning condition has been validated through confirmatory experiment.

Comparative Assessment of Cutting Inserts and Optimization during Hard Turning: Taguchi-Based Grey Relational Analysis

NASA Astrophysics Data System (ADS)

Venkata Subbaiah, K.; Raju, Ch.; Suresh, Ch.

2017-08-01

The present study aims to compare the conventional cutting inserts with wiper cutting inserts during the hard turning of AISI 4340 steel at different workpiece hardness. Type of insert, hardness, cutting speed, feed, and depth of cut are taken as process parameters. Taguchi’s L18 orthogonal array was used to conduct the experimental tests. Parametric analysis carried in order to know the influence of each process parameter on the three important Surface Roughness Characteristics (Ra, Rz, and Rt) and Material Removal Rate. Taguchi based Grey Relational Analysis (GRA) used to optimize the process parameters for individual response and multi-response outputs. Additionally, the analysis of variance (ANOVA) is also applied to identify the most significant factor.

Breast-feeding intention, initiation and duration among Hong Kong Chinese women: a prospective longitudinal study.

PubMed

Wang, Wenru; Lau, Ying; Chow, Aloysius; Chan, Kin Sin

2014-06-01

to (1) estimate the breast-feeding intention, initiation and duration rate; (2) identify the reasons to initiate and wean breast feeding and (3) explore predictors of breast-feeding duration. a prospective longitudinal study antenatal clinics of five regional hospitals from four clusters in Hong Kong a population-based sample of 2098 women in the second trimester of pregnancy was recruited with a systematic sampling method. three different sets of self-administered questionnaires were used to measure the breast-feeding intention, initiation and duration, demographic, socio-economic, obstetric, complications of pregnancy and intrapartum variables at three time points. Reasons for initiating and weaning breast feeding, the formal and informal supportive resources of participants during breast feeding were collated at the third time points. the rates of artificial feeding and breast feeding were 41.1% and 58.9%, whereas breast-feeding intention and initiation rates were 85.3% and 67.0%, respectively. The breast-feeding duration rates were 11.1%, 10.3%, 10.7% and 26.7%, for the 'within <1 week', '1-3 weeks', '>3-6 weeks' and '>6 weeks' groups. The common reasons for initiating breast feeding were that breast feeding is beneficial for both the baby (89.8%) and mother (39.7%). Reasons for weaning breast feeding were insufficient breast milk (32.7%), tiredness and fatigue (39.7%) and return to work (29.6%). Partner, relatives and nurse midwives were important supportive resource during breast feeding. Ordinal logistic regression analysis identified five predictive factors of breast-feeding duration. Participants who were working part-time or were housewives (p=0.037), had monthly family income of

Functional, size and taxonomic diversity of fish along a depth gradient in the deep sea.

PubMed

Mindel, Beth L; Neat, Francis C; Trueman, Clive N; Webb, Thomas J; Blanchard, Julia L

2016-01-01

Biodiversity is well studied in ecology and the concept has been developed to include traits of species, rather than solely taxonomy, to better reflect the functional diversity of a system. The deep sea provides a natural environmental gradient within which to study changes in different diversity metrics, but traits of deep-sea fish are not widely known, hampering the application of functional diversity to this globally important system. We used morphological traits to determine the functional richness and functional divergence of demersal fish assemblages along the continental slope in the Northeast Atlantic, at depths of 300-2,000 m. We compared these metrics to size diversity based on individual body size and species richness. Functional richness and size diversity showed similar patterns, with the highest diversity at intermediate depths; functional divergence showed the opposite pattern, with the highest values at the shallowest and deepest parts of the study site. Species richness increased with depth. The functional implications of these patterns were deduced by examining depth-related changes in morphological traits and the dominance of feeding guilds as illustrated by stable isotope analyses. The patterns in diversity and the variation in certain morphological traits can potentially be explained by changes in the relative dominance of pelagic and benthic feeding guilds. All measures of diversity examined here suggest that the deep areas of the continental slope may be equally or more diverse than assemblages just beyond the continental shelf.

Optimization of L: -methionine feeding strategy for improving S-adenosyl-L: -methionine production by methionine adenosyltransferase overexpressed Pichia pastoris.

PubMed

Hu, Hui; Qian, Jiangchao; Chu, Ju; Wang, Yonghong; Zhuang, Yingping; Zhang, Siliang

2009-07-01

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-L: -methionine (SAM). Two L: -methionine (L: -Met) addition strategies were used to supply the precursor: the batch addition strategy (L: -Met was added separately at three time points) and the continuous feeding strategies (L: -Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l(-1) h(-1), respectively). SAM accumulation, L: -Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 +/- 0.31 g l(-1), 41.7 +/- 1.4%, and 0.18 +/- 0.01 g l(-1) h(-1) with the best continuous feeding strategy (0.2 g l(-1) h(-1)), respectively. The bottleneck for SAM production with the low L: -Met feeding rate (0.1 g L(-1) h(-1)) was the insufficient L: -Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing L: -Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the L: -Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the L: -Met feeding rate reached 0.5 g l(-1) h(-1).

Temperature, field activity and post-feeding metabolic response in the Asian house gecko, Hemidactylus frenatus.

PubMed

Lei, Juan; Booth, David T

2014-10-01

Temperature has significant effects on physiological activities and geographical distribution of ectotherms. The Asian house gecko Hemidactylus frenatus has become one of the most widely distributed reptiles in the world and is an invasive species in Australia. Since being introduced into northern Australia, Asian house geckos have spread rapidly and expanded into south-east Queensland and northern New South Wales. Despite their rapid spread, there have been few studies that address thermal adaptability of this species. In order to understand how temperature might limit the distribution and feeding behavior of H. frenatus we observed gecko foraging activities in the wild over the winter period, measured the temperature at which voluntary feeding ceases, and assessed the effect of temperature (30, 25, 20, and 18 °C) on post-feeding metabolic rate. Resting metabolic rate and post-feeding peak in metabolic rate decreased with low temperature, while the duration of elevated metabolic rate after feeding increased at lower temperature. The SDA coefficient (a ratio of the energy expended due to the post-feeding rise in metabolic rate to the energy contained within the meal) did not change systematically with ambient temperature. Field observations and voluntary feeding experiments showed that H. frenatus stop feeding when ambient temperature drops below 17 °C, so that persistent night time temperatures below 17 °C may be limiting the distribution of this species. Copyright © 2014 Elsevier Ltd. All rights reserved.

Study of process parameter on mist lubrication of Titanium (Grade 5) alloy

NASA Astrophysics Data System (ADS)

Maity, Kalipada; Pradhan, Swastik

2017-02-01

This paper deals with the machinability of Ti-6Al-4V alloy with mist cooling lubrication using carbide inserts. The influence of process parameter on the cutting forces, evolution of tool wear, surface finish of the workpiece, material removal rate and chip reduction coefficient have been investigated. Weighted principal component analysis coupled with grey relational analysis optimization is applied to identify the optimum setting of the process parameter. Optimal condition of the process parameter was cutting speed at 160 m/min, feed at 0.16 mm/rev and depth of cut at 1.6 mm. Effects of cutting speed and depth of cut on the type of chips formation were observed. Most of the chips forms were long tubular and long helical type. Image analyses of the segmented chip were examined to study the shape and size of the saw tooth profile of serrated chips. It was found that by increasing cutting speed from 95 m/min to 160 m/min, the free surface lamella of the chips increased and the visibility of the saw tooth segment became clearer.

The Ecological Rise of Whales Chronicled by the Fossil Record.

PubMed

Pyenson, Nicholas D

2017-06-05

The evolution of cetaceans is one of the best examples of macroevolution documented from the fossil record. While ecological transitions dominate each phase of cetacean history, this context is rarely stated explicitly. The first major ecological phase involves a transition from riverine and deltaic environments to marine ones, concomitant with dramatic evolutionary transformations documented in their early fossil record. The second major phase involves ecological shifts associated with evolutionary innovations: echolocation (facilitating hunting prey at depth) and filter-feeding (enhancing foraging efficiency on small prey). This latter phase involves body size shifts, attributable to changes in foraging depth and environmental forcing, as well as re-invasions of freshwater systems on continental basins by multiple lineages. Modern phenomena driving cetacean ecology, such as trophic dynamics and arms races, have an evolutionary basis that remains mostly unexamined. The fossil record of cetaceans provides an historical basis for understanding current ecological mechanisms and consequences, especially as global climate change rapidly alters ocean and river ecosystems at rates and scales comparable to those over geologic time. Published by Elsevier Ltd.

Integrating diverse forage sources reduces feed gaps on mixed crop-livestock farms.

PubMed

Bell, L W; Moore, A D; Thomas, D T

2017-12-04

Highly variable climates induce large variability in the supply of forage for livestock and so farmers must manage their livestock systems to reduce the risk of feed gaps (i.e. periods when livestock feed demand exceeds forage supply). However, mixed crop-livestock farmers can utilise a range of feed sources on their farms to help mitigate these risks. This paper reports on the development and application of a simple whole-farm feed-energy balance calculator which is used to evaluate the frequency and magnitude of feed gaps. The calculator matches long-term simulations of variation in forage and metabolisable energy supply from diverse sources against energy demand for different livestock enterprises. Scenarios of increasing the diversity of forage sources in livestock systems is investigated for six locations selected to span Australia's crop-livestock zone. We found that systems relying on only one feed source were prone to higher risk of feed gaps, and hence, would often have to reduce stocking rates to mitigate these risks or use supplementary feed. At all sites, by adding more feed sources to the farm feedbase the continuity of supply of both fresh and carry-over forage was improved, reducing the frequency and magnitude of feed deficits. However, there were diminishing returns from making the feedbase more complex, with combinations of two to three feed sources typically achieving the maximum benefits in terms of reducing the risk of feed gaps. Higher stocking rates could be maintained while limiting risk when combinations of other feed sources were introduced into the feedbase. For the same level of risk, a feedbase relying on a diversity of forage sources could support stocking rates 1.4 to 3 times higher than if they were using a single pasture source. This suggests that there is significant capacity to mitigate both risk of feed gaps at the same time as increasing 'safe' stocking rates through better integration of feed sources on mixed crop-livestock farms across diverse regions and climates.

Developmental milestones record - 9 months

MedlinePlus

... Feeds self with fingers Throws or shakes objects SENSORY AND COGNITIVE SKILLS The 9-month-old typically: Babbles Has separation anxiety and may cling to parents Is developing depth perception Understands that objects continue to exist, even when ...

[Effects of an Individual Breast-feeding Promotion Program for Married Immigrant Women].

PubMed

Park, Mi Kyoung; Moon, So Hyun

2016-02-01

This study was designed to evaluate the effects of an individual breast-feeding promotion program to address breast-feeding knowledge, attitude, method and rate of practice for married immigrant women. A non-equivalent control group quasi-experimental design was used (experimental group=16, control group=17). The intervention consisted of 3 phases: (1) Within 2 hours of delivery - individual breast-feeding training through video/verbal/practical training education and demonstration (2) After 1~2 days - group training using video, model doll, and breast models (3) After 7 days - family visit, counseling, retraining and reinforcement training. The data were analyzed using non-parametric tests with the SPSS program. Married immigrant women who participated in the individual breast-feeding program scored high in knowledge, attitude, method and rate of practice compared to the control group. The results indicate that the individual breast-feeding program is very effective in increasing breast-feeding knowledge, attitude, method and rate of practicing breast feeding for married immigrant women. So, nurses are encouraged to aggressively utilize individual breast-feeding programs to help married immigrant women, who are exposed to vulnerability due to various situations.

Developing a workplace breast feeding support model for employed lactating mothers.

PubMed

Yimyam, Susanha; Hanpa, Wasana

2014-06-01

Resuming work is often considered an obstacle for continued breast feeding. The objectives of this participatory action research study were to develop a breast feeding support model in the workplace and to compare breast feeding rates before and after implementation of the breast feeding support campaign. Twenty-four women participated before the implementation of the breast feeding support campaign, whereas 31 women participated after the campaign. Data were collected by interviewing employed women about their breast feeding practices within six months post partum. Additional data were collected through interviews with the workplace administrator and head of work sections as well as observation of the breast feeding support campaigns. Qualitative data were analysed using thematic analysis, whereas quantitative data were analysed using descriptive statistics and χ(2) test. The workplace breast feeding support model was developed based on the concept of Mother-Friendly Workplace Initiatives by the World Alliance for Breastfeeding Action (WABA) and the Thai government׳s promotion of a workplace breast feeding corner. Within this model, a committee for breast feeding support was created for working with the research team to develop breast feeding activities and media for breast feeding education and breast feeding support campaigns in the workplace. Breast feeding rates at six months after implementation of the breast feeding support campaign were significantly higher than rates before, both for exclusive breast feeding and any breast feeding at levels .004 and .033, respectively. These results suggest that breast feeding should be encouraged in every workplace depending on context. Individual advice and help for employed mothers should be provided from pregnancy through weaning in the postpartum period. Copyright © 2014 Elsevier Ltd. All rights reserved.

UK-born ethnic minority women and their experiences of feeding their newborn infant.

PubMed

Twamley, Katherine; Puthussery, Shuby; Harding, Seeromanie; Baron, Maurina; Macfarlane, Alison

2011-10-01

to explore the factors that impact on UK-born ethnic minority women's experiences of and decisions around feeding their infant. in-depth semi-structured interviews. 34 UK-born women of Black African, Black Caribbean, Pakistani, Bangladeshi, Indian and Irish parentage and 30 health-care professionals. women and health-care professionals were recruited primarily from hospitals serving large numbers of ethnic minority women in London and Birmingham. despite being aware of the benefits of exclusive breast feeding, many women chose to feed their infant with formula. The main barriers to breast feeding were the perceived difficulties of breast feeding, a family preference for formula feed, and embarrassment about breast feeding in front of others. Reports from women of South Asian parentage, particularly those who lived with an extended family, suggested that their intentions to breast feed were compromised by the context of their family life. The lack of privacy in these households and grandparental pressure appeared to be key issues. Unlike other participants, Irish women reported an intention to feed their infant with formula before giving birth. The key facilitators to breast feeding were the self-confidence and determination of women and the supportive role of health-care professionals. these findings point to common but also culturally specific mechanisms that may hinder both the initiation and maintenance of breast feeding in UK-born ethnic minority women. They signal potential benefits from the inclusion of family members in breast-feeding support programmes. Copyright © 2010 Elsevier Ltd. All rights reserved.

Factors contributing to early breast-feeding cessation among Chinese mothers: an exploratory study.

PubMed

Tarrant, Marie; Dodgson, Joan E; Wu, Kendra M

2014-10-01

Although more than 85% of all new mothers in Hong Kong now initiate breast feeding, few exclusively breast feed and the overall duration is short. More than one-third stop breast feeding within the first month post partum. To explore the breast-feeding experiences of Hong Kong Chinese mothers who prematurely discontinue breast feeding and to identify contributing factors that might be remediated to help women breast feed longer. Qualitative exploratory study. In-depth, exploratory interviews were carried out with 24 new mothers who stopped breast feeding within one month after birth, and content analysis was used to analyse the data. Five core themes emerged from the data: unnatural expectations, left to figure it out, uncertainty, unfulfilling experiences, and guilt versus relief. Because breast feeding is 'natural' participants expected that it would come naturally and thus be easy. When breast feeding did not happen naturally, however, midwives were too busy to provide breast-feeding support and mothers were left to figure it out on their own. Participants also reported difficulty in gauging whether the infant was getting adequate nutrition from their breastmilk. Few participants had positive breast-feeding experiences; while the decision to stop breast feeding caused guilt for most participants, others expressed relief at stopping breast feeding. Greater postnatal breast-feeding support, both in the hospital and after the mother returns home, would likely increase the mother׳s confidence and enhance her mothering experience. Further antenatal and postnatal education on the realistic breast-feeding expectations and the amount of breastmilk required by babies is also important. More research is needed to test professional and peer support breast-feeding interventions to provide guidance to policy makers on the most effective breast-feeding support strategies. Copyright © 2014 Elsevier Ltd. All rights reserved.

Slab dehydration in Cascadia and its relationship to volcanism, seismicity, and non-volcanic tremor

NASA Astrophysics Data System (ADS)

Delph, J. R.; Levander, A.; Niu, F.

2017-12-01

The characteristics of subduction beneath the Pacific Northwest (Cascadia) are variable along strike, leading to the segmentation of Cascadia into 3 general zones: Klamath, Siletzia, and Wrangelia. These zones show marked differences in tremor density, earthquake density, seismicity rates, and the locus and amount of volcanism in the subduction-related volcanic arc. To better understand what controls these variations, we have constructed a 3D shear-wave velocity model of the upper 80 km along the Cascadia margin from the joint inversion of CCP-derived receiver functions and ambient noise surface wave data using 900 temporary and permanent broadband seismic stations. With this model, we can investigate variations in the seismic structure of the downgoing oceanic lithosphere and overlying mantle wedge, the character of the crust-mantle transition beneath the volcanic arc, and local to regional variations in crustal structure. From these results, we infer the presence and distribution of fluids released from the subducting slab and how they affect the seismic structure of the overriding lithosphere. In the Klamath and Wrangelia zones, high seismicity rates in the subducting plate and high tremor density correlate with low shear velocities in the overriding plate's forearc and relatively little arc volcanism. While the cause of tremor is debated, intermediate depth earthquakes are generally thought to be due to metamorphic dehydration reactions resulting from the dewatering of the downgoing slab. Thus, the seismic characteristics of these zones combined with rather sparse arc volcanism may indicate that the slab has largely dewatered by the time it reaches sub-arc depths. Some of the water released during earthquakes (and possibly tremor) may percolate into the overriding plate, leading to slow seismic velocities in the forearc. In contrast, Siletzia shows relatively low seismicity rates and tremor density, with relatively higher shear velocities in the forearc. Siletzia also contains most of the young arc volcanoes in the Cascades, indicating that water is retained in the slab to depths where it can feed arc volcanism. Thus, the along strike variations in volcanic activity and seismic activity in Cascadia appear to be related to variations in depth of dewatering of the downgoing oceanic lithosphere.

Limits to physiological plasticity of the coral Pocillopora verrucosa from the central Red Sea

NASA Astrophysics Data System (ADS)

Ziegler, Maren; Roder, Cornelia M.; Büchel, Claudia; Voolstra, Christian R.

2014-12-01

Many coral species display changing distribution patterns across coral reef depths. While changes in the underwater light field and the ability to associate with different photosynthetic symbionts of the genus Symbiodinium explain some of the variation, the limits to physiological plasticity are unknown for most corals. In the central Red Sea, colonies of the branching coral Pocillopora verrucosa are most abundant in shallow high light environments and become less abundant in water depths below 10 m. To further understand what determines this narrow distribution, we conducted a cross-depths transplant experiment looking at physiological plasticity and acclimation in regard to depth. Colonies from 5, 10, and 20 m were collected, transplanted to all depths, and re-investigated after 30 and 210 d. All coral colonies transplanted downward from shallow to deep water displayed an increase in photosynthetic light-harvesting pigments, which resulted in higher photosynthetic efficiency. Shallow-water specimens transplanted to deeper water showed a significant decrease in total protein content after 30 and 210 d under low light conditions compared to specimens transplanted to shallow and medium depths. Stable isotope data suggest that heterotrophic input of carbon was not increased under low light, and consequently, decreasing protein levels were symptomatic of decreasing photosynthetic rates that could not be compensated for through higher light-harvesting efficiency. Our results provide insights into the physiological plasticity of P. verrucosa in changing light regimes and explain the observed depth distribution pattern. Despite its high abundance in shallow reef waters, P. verrucosa possesses limited heterotrophic acclimation potential, i.e., the ability to support its mainly photoautotrophic diet through heterotrophic feeding. We conclude that P. verrucosa might be a species vulnerable to sudden changes in underwater light fields resulting from processes such as increased turbidity caused by coastal development along the Saudi Arabian Red Sea coast.

Genetic and phenotypic variation along an ecological gradient in lake trout Salvelinus namaycush

USGS Publications Warehouse

Baillie, Shauna M.; Muir, Andrew M.; Hansen, Michael J.; Krueger, Charles C.; Bentzen, Paul

2016-01-01

BackgroundAdaptive radiation involving a colonizing phenotype that rapidly evolves into at least one other ecological variant, or ecotype, has been observed in a variety of freshwater fishes in post-glacial environments. However, few studies consider how phenotypic traits vary with regard to neutral genetic partitioning along ecological gradients. Here, we present the first detailed investigation of lake trout Salvelinus namaycushthat considers variation as a cline rather than discriminatory among ecotypes. Genetic and phenotypic traits organized along common ecological gradients of water depth and geographic distance provide important insights into diversification processes in a lake with high levels of human disturbance from over-fishing.ResultsFour putative lake trout ecotypes could not be distinguished using population genetic methods, despite morphological differences. Neutral genetic partitioning in lake trout was stronger along a gradient of water depth, than by locality or ecotype. Contemporary genetic migration patterns were consistent with isolation-by-depth. Historical gene flow patterns indicated colonization from shallow to deep water. Comparison of phenotypic (Pst) and neutral genetic variation (Fst) revealed that morphological traits related to swimming performance (e.g., buoyancy, pelvic fin length) departed more strongly from neutral expectations along a depth gradient than craniofacial feeding traits. Elevated phenotypic variance with increasing water depth in pelvic fin length indicated possible ongoing character release and diversification. Finally, differences in early growth rate and asymptotic fish length across depth strata may be associated with limiting factors attributable to cold deep-water environments.ConclusionWe provide evidence of reductions in gene flow and divergent natural selection associated with water depth in Lake Superior. Such information is relevant for documenting intraspecific biodiversity in the largest freshwater lake in the world for a species that recently lost considerable genetic diversity and is now in recovery. Unknown is whether observed patterns are a result of an early stage of incipient speciation, gene flow-selection equilibrium, or reverse speciation causing formerly divergent ecotypes to collapse into a single gene pool.

Quality evaluation of millet-soy blended extrudates formulated through linear programming.

PubMed

Balasubramanian, S; Singh, K K; Patil, R T; Onkar, Kolhe K

2012-08-01

Whole pearl millet, finger millet and decorticated soy bean blended (millet soy) extrudates formulations were designed using a linear programming (LP) model to minimize the total cost of the finished product. LP formulated composite flour was extruded through twin screw food extruder at different feed rate (6.5-13.5 kg/h), screw speed (200-350 rpm, constant feed moisture (14% wb), barrel temperature (120 °C) and cutter speed (15 rpm). The physical, functional, textural and pasting characteristics of extrudates were examined and their responses were studied. Expansion index (2.31) and sectional expansion index (5.39) was found to be was found maximum for feed rate and screw speed combination 9.5 kg/h and 250 rpm. However, density (0.25 × 10(-3) g/mm(3)) was maximum for 9.5 kg/h and 300 rpm combination. Maximum color change (10.32) was found for 9.5 kg/h feed rate and 200 rpm screw speed. The lower hardness was obtained for the samples extruded at lowest feed rate (6.5 kg/h) for all screw speed and feed rate at 9.5 kg/h for 300-350 rpm screw speed. Peak viscosity decreases with all screw speed of 9.5 kg/h feed rate.

Coping with copepods: do right whales (Eubalaena glacialis) forage visually in dark waters?

PubMed Central

Fasick, Jeffry I.; Kezmoh, Lorren J.; Baumgartner, Mark F.

2017-01-01

North Atlantic right whales (Eubalaena glacialis) feed during the spring and early summer in marine waters off the northeast coast of North America. Their food primarily consists of planktonic copepods, Calanus finmarchicus, which they consume in large numbers by ram filter feeding. The coastal waters where these whales forage are turbid, but they successfully locate copepod swarms during the day at depths exceeding 100 m, where light is very dim and copepod patches may be difficult to see. Using models of E. glacialis visual sensitivity together with measurements of light in waters near Cape Cod where they feed and of light attenuation by living copepods in seawater, we evaluated the potential for visual foraging by these whales. Our results suggest that vision may be useful for finding copepod patches, particularly if E. glacialis searches overhead for silhouetted masses or layers of copepods. This should permit the whales to locate C. finmarchicus visually throughout most daylight hours at depths throughout their foraging range. Looking laterally, the whales might also be able to see copepod patches at short range near the surface. This article is part of the themed issue ‘Vision in dim light’. PMID:28193812

Coping with copepods: do right whales (Eubalaena glacialis) forage visually in dark waters?

PubMed

Cronin, Thomas W; Fasick, Jeffry I; Schweikert, Lorian E; Johnsen, Sönke; Kezmoh, Lorren J; Baumgartner, Mark F

2017-04-05

North Atlantic right whales ( Eubalaena glacialis ) feed during the spring and early summer in marine waters off the northeast coast of North America. Their food primarily consists of planktonic copepods, Calanus finmarchicus , which they consume in large numbers by ram filter feeding. The coastal waters where these whales forage are turbid, but they successfully locate copepod swarms during the day at depths exceeding 100 m, where light is very dim and copepod patches may be difficult to see. Using models of E. glacialis visual sensitivity together with measurements of light in waters near Cape Cod where they feed and of light attenuation by living copepods in seawater, we evaluated the potential for visual foraging by these whales. Our results suggest that vision may be useful for finding copepod patches, particularly if E. glacialis searches overhead for silhouetted masses or layers of copepods. This should permit the whales to locate C. finmarchicus visually throughout most daylight hours at depths throughout their foraging range. Looking laterally, the whales might also be able to see copepod patches at short range near the surface.This article is part of the themed issue 'Vision in dim light'. © 2017 The Author(s).

Postpartum weight loss: weight struggles, eating, exercise, and breast-feeding.

PubMed

Montgomery, Kristen S; Best, Melissa; Aniello, Tracy B; Phillips, Jennifer D; Hatmaker-Flanigan, Elizabeth

2013-06-01

Twenty-four women with children 5 years old or younger were interviewed regarding their experiences in losing weight during the postpartum period. Phenomenological interviews were conducted according to Husserl's perspective. Women who participated in the study revealed the issues related to postpartum weight loss: weight struggles, exercise, breast-feeding, eating, and pregnancy contributions to weight gain. The overall theme that resulted from these in-depth interviews was that women struggle to balance their successes and setbacks in losing weight during the postpartum period.

Functional response models to estimate feeding rates of wading birds

USGS Publications Warehouse

Collazo, J.A.; Gilliam, J.F.; Miranda-Castro, L.

2010-01-01

Forager (predator) abundance may mediate feeding rates in wading birds. Yet, when modeled, feeding rates are typically derived from the purely prey-dependent Holling Type II (HoII) functional response model. Estimates of feeding rates are necessary to evaluate wading bird foraging strategies and their role in food webs; thus, models that incorporate predator dependence warrant consideration. Here, data collected in a mangrove swamp in Puerto Rico in 1994 were reanalyzed, reporting feeding rates for mixed-species flocks after comparing fits of the HoII model, as used in the original work, to the Beddington-DeAngelis (BD) and Crowley-Martin (CM) predator-dependent models. Model CM received most support (AIC c wi = 0.44), but models BD and HoII were plausible alternatives (AIC c ??? 2). Results suggested that feeding rates were constrained by predator abundance. Reductions in rates were attributed to interference, which was consistent with the independently observed increase in aggression as flock size increased (P < 0.05). Substantial discrepancies between the CM and HoII models were possible depending on flock sizes used to model feeding rates. However, inferences derived from the HoII model, as used in the original work, were sound. While Holling's Type II and other purely prey-dependent models have fostered advances in wading bird foraging ecology, evaluating models that incorporate predator dependence could lead to a more adequate description of data and processes of interest. The mechanistic bases used to derive models used here lead to biologically interpretable results and advance understanding of wading bird foraging ecology.

Cellular automata simulation of topological effects on the dynamics of feed-forward motifs

PubMed Central

Apte, Advait A; Cain, John W; Bonchev, Danail G; Fong, Stephen S

2008-01-01

Background Feed-forward motifs are important functional modules in biological and other complex networks. The functionality of feed-forward motifs and other network motifs is largely dictated by the connectivity of the individual network components. While studies on the dynamics of motifs and networks are usually devoted to the temporal or spatial description of processes, this study focuses on the relationship between the specific architecture and the overall rate of the processes of the feed-forward family of motifs, including double and triple feed-forward loops. The search for the most efficient network architecture could be of particular interest for regulatory or signaling pathways in biology, as well as in computational and communication systems. Results Feed-forward motif dynamics were studied using cellular automata and compared with differential equation modeling. The number of cellular automata iterations needed for a 100% conversion of a substrate into a target product was used as an inverse measure of the transformation rate. Several basic topological patterns were identified that order the specific feed-forward constructions according to the rate of dynamics they enable. At the same number of network nodes and constant other parameters, the bi-parallel and tri-parallel motifs provide higher network efficacy than single feed-forward motifs. Additionally, a topological property of isodynamicity was identified for feed-forward motifs where different network architectures resulted in the same overall rate of the target production. Conclusion It was shown for classes of structural motifs with feed-forward architecture that network topology affects the overall rate of a process in a quantitatively predictable manner. These fundamental results can be used as a basis for simulating larger networks as combinations of smaller network modules with implications on studying synthetic gene circuits, small regulatory systems, and eventually dynamic whole-cell models. PMID:18304325

Hardgrove grindability index and petrology used as an enhanced predictor of coal feed rate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hower, J.C.

1990-01-01

An improved predictor of coal pulverization behavior and coal feed rate is under development at the CAER based upon the interaction between Hardgrove Grindability Index (HGI) and coal petrology. With educated attention, this interaction may be a useful tool to enhance coal feed rates if cautiously extended to the mining environment where blends of coal lithotypes are produced.

Evaluation of the Missouri WIC (Special Supplemental Nutrition Program for Women, Infants, and Children) breast-feeding peer counselling programme.

PubMed

Yun, Shumei; Liu, Qian; Mertzlufft, Kathy; Kruse, Catherine; White, Maggie; Fuller, Phyllis; Zhu, Bao-Ping

2010-02-01

To evaluate the effectiveness of the peer counselling (PC) programme on breast-feeding initiation among participants in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) in Missouri, and to identify factors that facilitate breast-feeding initiation. We used the data from the 2006 Missouri Pregnancy Nutrition Surveillance System, Missouri Live Birth Records and the Missouri WIC programme to compare breast-feeding initiation rates between PC and non-PC agencies. We used multilevel logistic regression, with individual participants being nested within agencies, to control for individual- and agency-level characteristics. The breast-feeding initiation rate in PC agencies was significantly higher than in non-PC agencies among prenatal participants, but the difference was not significant among postpartum participants. After controlling for maternal sociodemographic characteristics, compared with prenatal cases in non-PC agencies, prenatal cases in PC agencies were more likely to initiate breast-feeding (OR = 1.21; 95 % CI 1.03, 1.43), whereas postpartum cases were less likely to initiate breast-feeding. Among prenatal participants in PC agencies, longer duration of prenatal WIC enrolment was associated with a higher rate of breast-feeding initiation. After adjusting for maternal sociodemographic characteristics and other agency-level characteristics, participants of PC agencies with an international board-certified lactation consultant were more likely to initiate breast-feeding than participants of PC agencies without such a consultant (OR = 1.21; 95 % CI 1.01, 1.45). Prenatal participation in the WIC breast-feeding PC programme (especially participation early during pregnancy) was associated with an increased rate of breast-feeding initiation in Missouri.

Frequency preference and attention effects across cortical depths in the human primary auditory cortex.

PubMed

De Martino, Federico; Moerel, Michelle; Ugurbil, Kamil; Goebel, Rainer; Yacoub, Essa; Formisano, Elia

2015-12-29

Columnar arrangements of neurons with similar preference have been suggested as the fundamental processing units of the cerebral cortex. Within these columnar arrangements, feed-forward information enters at middle cortical layers whereas feedback information arrives at superficial and deep layers. This interplay of feed-forward and feedback processing is at the core of perception and behavior. Here we provide in vivo evidence consistent with a columnar organization of the processing of sound frequency in the human auditory cortex. We measure submillimeter functional responses to sound frequency sweeps at high magnetic fields (7 tesla) and show that frequency preference is stable through cortical depth in primary auditory cortex. Furthermore, we demonstrate that-in this highly columnar cortex-task demands sharpen the frequency tuning in superficial cortical layers more than in middle or deep layers. These findings are pivotal to understanding mechanisms of neural information processing and flow during the active perception of sounds.

Stable isotope trophic patterns in echinoderm megafauna in close proximity to and remote from Gulf of Mexico lower slope hydrocarbon seeps

NASA Astrophysics Data System (ADS)

Carney, Robert Spencer

2010-11-01

Hydrocarbon-seep communities in the Gulf of Mexico have a high biomass that is exploited as a food source to varying degrees by the photosynthesis-dependent fauna inhabiting the surrounding mud bottom. A decline concurrent with ocean depth in detritus influx to that background habitat results in a much lower background biomass. The biomass contrast between population-rich seeps and depauperate mud bottom leads to the prediction that seep utilization by the background fauna should be extensive at all depths and should increase with depth. Species depth zonation makes like-species comparisons over the full depth of the Gulf of Mexico impossible. Seeps and normal bottom above 1000 m have different fauna from those below 1000 m. Lower slope seeps are surrounded by a fauna rich in echinoderm species, especially asteroids, ophiuroids, and holothuroids. All three taxa have species that are abundant within seeps and are probably endemic to them. They also contain species found only in mud background or within mud and seeps backgrounds. Tissue analyses of δ13C and δ15N of echinoderms collected by ROV within seeps and trawling away from seeps indicate a pattern of utilization similar to that found in upper slope seeps exploited by different taxa. Seastar and ophiuroid species abundant in or endemic to seeps have tissue isotope values reflecting seep chemosynthetic input via a free-living microbial detritus or predation. A single seep-endemic deposit-feeding holothuroid showed distinct seep tissue values. Background deposit-feeding holothuroids collected within seeps showed either no or only minor incorporation of seep carbon, indicating either a lack of access to seep detritus or short feeding times within the seep. A predicted extensive utilization of seep productivity at the deeper seeps was not found. Seeps may be relatively closed systems that require special adaptations of species in order for them to enter, exploit, and survive. Alternately, the surrounding deep benthos may not be as food-poor as assumed from biomass measurements and flux estimates.

Antenatal education and postnatal support strategies for improving rates of exclusive breast feeding: randomised controlled trial.

PubMed

Su, Lin-Lin; Chong, Yap-Seng; Chan, Yiong-Huak; Chan, Yah-Shih; Fok, Doris; Tun, Kay-Thwe; Ng, Faith S P; Rauff, Mary

2007-09-22

To investigate whether antenatal breast feeding education alone or postnatal lactation support alone improves rates of exclusive breast feeding compared with routine hospital care. Randomised controlled trial. A tertiary hospital in Singapore. 450 women with uncomplicated pregnancies. Primary outcomes were rates of exclusive breast feeding at discharge from hospital and two weeks, six weeks, three months, and six months after delivery. Secondary outcomes were rates of any breast feeding. Compared with women who received routine care, women in the postnatal support group were more likely to breastfeed exclusively at two weeks (relative risk 1.82, 95% confidence interval 1.14 to 2.90), six weeks (1.85, 1.11 to 3.09), three months (1.87, 1.03 to 3.41), and six months (2.12, 1.03 to 4.37) postnatally. Women receiving antenatal education were more likely to breast feed exclusively at six weeks (1.73, 1.04 to 2.90), three months (1.92, 1.07 to 3.48), and six months (2.16, 1.05 to 4.43) postnatally. The numbers needed to treat to achieve one woman exclusively breast feeding at six months were 11 (6 to 80) for postnatal support and 10 (6 to 60) for antenatal education. Women who received postnatal support were more likely to exclusively or predominantly breast feed two weeks after delivery compared with women who received antenatal education (1.53, 1.01 to 2.31). The rate of any breastfeeding six weeks after delivery was also higher in the postnatal support group compared with women who received routine care (1.16, 1.02 to 1.31). Antenatal breast feeding education and postnatal lactation support, as single interventions based in hospital both significantly improve rates of exclusive breast feeding up to six months after delivery. Postnatal support was marginally more effective than antenatal education. Clinical Trials NCT00270920 [ClinicalTrials.gov].

Selected regulation of gastrointestinal acid-base secretion and tissue metabolism for the diamondback water snake and Burmese python.

PubMed

Secor, Stephen M; Taylor, Josi R; Grosell, Martin

2012-01-01

Snakes exhibit an apparent dichotomy in the regulation of gastrointestinal (GI) performance with feeding and fasting; frequently feeding species modestly regulate intestinal function whereas infrequently feeding species rapidly upregulate and downregulate intestinal function with the start and completion of each meal, respectively. The downregulatory response with fasting for infrequently feeding snakes is hypothesized to be a selective attribute that reduces energy expenditure between meals. To ascertain the links between feeding habit, whole-animal metabolism, and GI function and metabolism, we measured preprandial and postprandial metabolic rates and gastric and intestinal acid-base secretion, epithelial conductance and oxygen consumption for the frequently feeding diamondback water snake (Nerodia rhombifer) and the infrequently feeding Burmese python (Python molurus). Independent of body mass, Burmese pythons possess a significantly lower standard metabolic rate and respond to feeding with a much larger metabolic response compared with water snakes. While fasting, pythons cease gastric acid and intestinal base secretion, both of which are stimulated with feeding. In contrast, fasted water snakes secreted gastric acid and intestinal base at rates similar to those of digesting snakes. We observed no difference between fasted and fed individuals for either species in gastric or intestinal transepithelial potential and conductance, with the exception of a significantly greater gastric transepithelial potential for fed pythons at the start of titration. Water snakes experienced no significant change in gastric or intestinal metabolism with feeding. Fed pythons, in contrast, experienced a near-doubling of gastric metabolism and a tripling of intestinal metabolic rate. For fasted individuals, the metabolic rate of the stomach and small intestine was significantly lower for pythons than for water snakes. The fasting downregulation of digestive function for pythons is manifested in a depressed gastric and intestinal metabolism, which selectively serves to reduce basal metabolism and hence promote survival between infrequent meals. By maintaining elevated GI performance between meals, fasted water snakes incur the additional cost of tissue activity, which is expressed in a higher standard metabolic rate.

The newly described heterotrophic dinoflagellate Gyrodinium moestrupii, an effective protistan grazer of toxic dinoflagellates.

PubMed

Yoo, Yeong Du; Yoon, Eun Young; Jeong, Hae Jin; Lee, Kyung Ha; Hwang, Yeong Jong; Seong, Kyeong Ah; Kim, Jae Seong; Park, Jae Yeon

2013-01-01

Few protistan grazers feed on toxic dinoflagellates, and low grazing pressure on toxic dinoflagellates allows these dinoflagellates to form red-tide patches. We explored the feeding ecology of the newly described heterotrophic dinoflagellate Gyrodinium moestrupii when it fed on toxic strains of Alexandrium minutum, Alexandrium tamarense, and Karenia brevis and on nontoxic strains of A. tamarense, Prorocentrum minimum, and Scrippsiella trochoidea. Specific growth rates of G. moestrupii feeding on each of these dinoflagellates either increased continuously or became saturated with increasing mean prey concentration. The maximum specific growth rate of G. moestrupii feeding on toxic A. minutum (1.60/d) was higher than that when feeding on nontoxic S. trochoidea (1.50/d) or P. minimum (1.07/d). In addition, the maximum growth rate of G. moestrupii feeding on the toxic strain of A. tamarense (0.68/d) was similar to that when feeding on the nontoxic strain of A. tamarense (0.71/d). Furthermore, the maximum ingestion rate of G. moestrupii on A. minutum (2.6 ng C/grazer/d) was comparable to that of S. trochoidea (3.0 ng C/grazer/d). Additionally, the maximum ingestion rate of G. moestrupii on the toxic strain of A. tamarense (2.1 ng C/grazer/d) was higher than that when feeding on the nontoxic strain of A. tamarense (1.3 ng C/grazer/d). Thus, feeding by G. moestrupii is not suppressed by toxic dinoflagellate prey, suggesting that it is an effective protistan grazer of toxic dinoflagellates. © 2012 The Author(s) Journal of Eukaryotic Microbiology © 2012 International Society of Protistologists.

Exclusive Breastfeeding Rate and Complementary Feeding Indicators in China: A National Representative Survey in 2013.

PubMed

Duan, Yifan; Yang, Zhenyu; Lai, Jianqiang; Yu, Dongmei; Chang, Suying; Pang, Xuehong; Jiang, Shan; Zhang, Huanmei; Bi, Ye; Wang, Jie; Scherpbier, Robert W; Zhao, Liyun; Yin, Shian

2018-02-22

Appropriate infant and young child feeding could reduce morbidity and mortality and could improve cognitive development of children. However, nationwide data on exclusive breastfeeding and complementary feeding status in China are scarce. The aim of this study was to assess current exclusive breastfeeding and complementary feeding status in China. A national representative survey (Chinese National Nutrition and Health Survey) of children aged under 6 years was done in 2013. Stratified multistage cluster sampling was used to select study participants. World Health Organization (WHO) infant and young child feeding indicators were firstly used to assess exclusive breastfeeding and complementary feeding practice nationwide. In total, 14,458 children aged under two years (0 to <730 days) were studied from 55 counties in 30 provinces in China. The crude exclusive breastfeeding rate under 6 months was 20.7% (908/4381) and the weighted exclusive breastfeeding rate was 18.6%. The crude prevalence of minimum dietary diversity, minimum meal frequency and minimum acceptable diet were 52.5% (5286/10,071), 69.8% (7027/10,071), and 27.4% (2764/10,071) among children aged 6-23 months, respectively. The weighted rate was 53.7%, 69.1%, and 25.1%, respectively. Residential area, household income and maternal education were positively associated with the three complementary feeding indicators. The exclusive breastfeeding rate under 6 months was low and complementary feeding practice was not optimal in China. Residential area, household income and maternal education might be used to target infants and young children to improve complementary feeding practice.

Exclusive Breastfeeding Rate and Complementary Feeding Indicators in China: A National Representative Survey in 2013

PubMed Central

Duan, Yifan; Yang, Zhenyu; Lai, Jianqiang; Yu, Dongmei; Chang, Suying; Pang, Xuehong; Jiang, Shan; Zhang, Huanmei; Bi, Ye; Wang, Jie; Scherpbier, Robert W.; Zhao, Liyun; Yin, Shian

2018-01-01

Appropriate infant and young child feeding could reduce morbidity and mortality and could improve cognitive development of children. However, nationwide data on exclusive breastfeeding and complementary feeding status in China are scarce. The aim of this study was to assess current exclusive breastfeeding and complementary feeding status in China. A national representative survey (Chinese National Nutrition and Health Survey) of children aged under 6 years was done in 2013. Stratified multistage cluster sampling was used to select study participants. World Health Organization (WHO) infant and young child feeding indicators were firstly used to assess exclusive breastfeeding and complementary feeding practice nationwide. In total, 14,458 children aged under two years (0 to <730 days) were studied from 55 counties in 30 provinces in China. The crude exclusive breastfeeding rate under 6 months was 20.7% (908/4381) and the weighted exclusive breastfeeding rate was 18.6%. The crude prevalence of minimum dietary diversity, minimum meal frequency and minimum acceptable diet were 52.5% (5286/10,071), 69.8% (7027/10,071), and 27.4% (2764/10,071) among children aged 6–23 months, respectively. The weighted rate was 53.7%, 69.1%, and 25.1%, respectively. Residential area, household income and maternal education were positively associated with the three complementary feeding indicators. The exclusive breastfeeding rate under 6 months was low and complementary feeding practice was not optimal in China. Residential area, household income and maternal education might be used to target infants and young children to improve complementary feeding practice. PMID:29470415

Shear heating and metamorphism in subduction zones, 2. The seismic-aseismic transition at c. 50 km depth.

NASA Astrophysics Data System (ADS)

Castro, A. E.; Spear, F. S.; Kohn, M. J.

2017-12-01

Recent work demonstrates that shear heating, which is required for explaining fore-arc heat flow, reconciles thermal models with pressure-temperature (P-T) conditions determined from exhumed metamorphic rocks, i.e. exhumed rocks are representative of normal subduction. However, the range of subduction conditions on Earth (age, angle and rate of subducting plate, character of overriding plate, coefficient of friction, etc.) implies a ≥250 °C range of corresponding temperatures at the depth of the seismic-aseismic transition (SAT), which is consistently observed at 40-60 km in subduction zones worldwide. Here we show that the predicted rheologies and mineral stabilities for 3 common rock types fail to explain the global consistency of the SAT depth, and we propose that mechanical removal of the weakest rocks is required. Using either realistic thermal models, or P-T conditions recorded by exhumed metamorphic rocks, a substantial subset of depths corresponding with any single petrologic or rheological process falls outside the relatively restricted 40-60 km depth of the SAT. For example, a thermal weakening mechanism (the brittle-ductile transition) implies a wide range of depths, regardless of proposed T (e.g. 20-30 km (300 °C), 25-60 km (400 °C), 35 to >85 km (500 °C), etc). Similarly, individual dehydration reactions span a larger range of depths than observed for the SAT; for example, chlorite-out (metapelites: 35 to >85 km; metabasalts: 40 to >85 km), brucite-out (35-75 km) and serpentine/talc-out (50 to >80 km). The failure of a single petrologic and rheological trigger for these characteristic rocks to produce a consistent SAT depth implies that these rocks do not control the SAT, and consequently must not be abundant at depths below the SAT. That is, these hydrated, weak, and buoyant rocks must be squeezed out of the subduction system, although subduction of discontinuous blobs or lenses to greater depth, e.g. to feed arc volcanoes, may occur. The SAT instead may represent progressive strengthening of the subduction interface through mechanical exclusion of weak rocks and formation of stiffer minerals with increasing temperature and depth. Ultimately, as the strengths of the slab and mantle wedge converge at c. 80 km depth, mechanical coupling occurs, driving mantle wedge convection.

An Overlap of Breastfeeding during Late Pregnancy Is Associated with Subsequent Changes in Colostrum Composition and Morbidity Rates among Peruvian Infants and Their Mothers1,2

PubMed Central

Marquis, Grace S.; Penny, Mary E.; Zimmer, J. Paul; Díaz, Judith M.; Marín, R. Margot

2009-01-01

An overlap of breast-feeding and late pregnancy is associated with decreased intake of human milk and reduced infant growth. We evaluated the association of an overlap with macronutrient and immunological components of milk, infant urinary IgA, and infant and maternal morbidity. On d 2 and 1 mo postpartum, staff measured 24-h intake of breast milk and collected samples from 133 Peruvian women; 68 had breast-fed during the last trimester of pregnancy (BFP) and 65 had not breast-fed during pregnancy (NBFP). Data on maternal and infant anthropometry and health were collected for 1 mo. On d 2, lactose and lysozyme concentrations were higher, total lysozyme intake was higher and concentration and total intake of lactoferrin were lower in the BFP than the NBFP group (P < 0.05). The total 1-mo IgA intake was lower among BFP than NBFP infants (P = 0.01). Urinary IgA concentration was correlated with breast milk IgA concentration (r = 0.29; P = 0.01) but not with breast-feeding during pregnancy. An overlap was not associated with diarrhea but BFP infants were 5 times as likely to have a cough for at least 7 d than NBFP infants (P < 0.05). Reported mastitis was rare and occurred only in the NBFP group (P = 0.05). An overlap of breast-feeding and late pregnancy was associated with changes in milk composition, an increased frequency in symptoms of infant respiratory illness but decreased reported mastitis. Further in-depth studies are warranted to determine the cumulative effects associated with a breast-feeding/pregnancy overlap on infant and maternal outcomes. PMID:12888642

Long-term efficacy of a tongue tie service in improving breast feeding rates: A prospective study.

PubMed

Billington, Jennifer; Yardley, Iain; Upadhyaya, Manasvi

2018-02-01

Breast feeding rates in England at 3months of age are approximately 17% for exclusive breast-feeding and 55% for breast-feeds supplemented with formula. Tongue-tie (TT) in infants is cited as a significant cause of difficulty with maintaining breast-feeding. Early treatment and support can improve breast-feeding and allow infants to benefit from the many long-term benefits of breast-feeding. Our aim was to determine BF rates in infants 3months after attending our tongue-tie clinic (TTC). Institutional ethical approval and study approval were obtained. Patients attending the TTC from May to July 2016 were included. Telephone contact was made 3months postprocedure to establish current behaviour. Symptom resolution was recorded as complete resolution (CR), moderate resolution (MoR), or minimal resolution (MiR). Feeding pattern was either exclusively BF or combined breast and formula feeds or exclusively formula fed. 100 infants were included with complete follow-up data on 87 (87% response rate). Median age at release of TT was 17 (2-88) days without any recurrence. Status at 3months was CR (n=70, 80%); MoR (n=13, 15%), and MiR (n=4, 5%). 43 (49%) were exclusively BF, 36 (41%) were supplementing BF with some formula (2/3 by choice and 1/3 owing to insufficient milk production), and 8 (10%) were using only formula milk (7 by choice and 2 owing to ongoing feeding difficulties). Of the 17 mothers still experiencing symptoms, 5 were exclusively breast-feeding, and 8 were persisting with combined feeds. Infants attending our tongue-tie clinic achieved both higher exclusive breastfeeding and combined breast and bottle-feeding when compared to national breast-feeding data at 3months of age. This can facilitate the achievement of long-term breastfeeding, exposing infants and mothers to many of the associated benefits. 4. Copyright © 2017 Elsevier Inc. All rights reserved.

Deep fluid transfer evidenced by surface deformation during the 2014-2015 unrest at Piton de la Fournaise volcano

NASA Astrophysics Data System (ADS)

Peltier, Aline; Beauducel, François; Villeneuve, Nicolas; Ferrazzini, Valérie; Di Muro, Andrea; Aiuppa, Alessandro; Derrien, Allan; Jourde, Kevin; Taisne, Benoit

2016-07-01

Identifying the onset of volcano unrest and providing an unequivocal identification of volcano reawakening remain challenging problems in volcanology. At Piton de la Fournaise, renewal of eruptive activity in 2014-2015, after 41 months of quiescence and deflation, was associated with long-term continuous edifice inflation measured by GNSS. Inflation started on June 9, 2014, and its rate progressively increased through 2015. Inflation onset was rapidly followed by an eruption on June 20-21, 2014, showing that volcano reactivation can be extremely fast, even after long non-eruptive phases. This short-lived eruption involved a shallow source (1.3-1.9 km depth below the summit). The inflation that followed, and eruptions in 2015, involved a larger depth range of fluid accumulation, constrained by inverse modeling at ca. 3.9 to 1.2-1.7 km depth. This time evolution reveals that volcano reawakening was associated with continuous pressurization of the shallowest parts of its plumbing system, triggered by progressive upwards transfer of magma from greater depth. A deep magma pulse occurred in mid-April 2015 and was associated with deep seismicity (3 to 9.5 km depth) and CO2 enrichment in fluids emitted by summit fumaroles. From this date, ground deformation accelerated and the output rates of eruptions increased, culminating in the long-lasting, large-volume, August-October eruption ( 36 Mm3). This evolution suggests that deep magma/fluid transfer through an open conduit system first provoked the expulsion of the top of the plumbing system in June 2014, and then induced the progressive vertical transfer of the entire plumbing system down to 9 km (four eruptions in 2015). The new sustained feeding of the volcano was also at the origin of the hydrothermal system perturbation and the acceleration of the eastern flank motion, which favor lateral dike propagation and the occurrence of frequent and increasingly large eruptions. Our results highlight the fast and progressive way in which basaltic magmatic systems can wake up.

Reduced Rift Valley fever virus infection rates in mosquitoes associated with pledget feedings.

PubMed

Turell, M J

1988-12-01

Infection rates were compared in Culex pipiens and Aedes taeniorhynchus after they fed on Rift Valley fever (RVF) viremic hamsters or ingested similar doses of RVF virus from blood-soaked pledgets. Infection rates were significantly lower for mosquitoes that ingested virus from a pledget than for those that ingested similar doses from viremic hamsters. The method used to prevent normal clot formation for the pledget feedings (i.e., defibrination by shaking with glass beads or addition of heparin) did not affect subsequent infection rates. Both inhibition of normal clot formation and freezing of virus after it had last been propagated were associated with significantly reduced infection rates with the pledget feedings. Laboratory studies using artificial feeding techniques may not give reliable estimates of the vector competence of mosquitoes for arboviruses.

Life history and feeding biology of the deep-sea pycnogonid Nymphon hirtipes

NASA Astrophysics Data System (ADS)

Mercier, Annie; Baillon, Sandrine; Hamel, Jean-François

2015-12-01

Pycnogonids (sea spiders) are commonly collected at bathyal and abyssal depths all around the world; however, little is known about species from deep-water habitats. The present study explores the life history of Nymphon hirtipes collected in northeastern Newfoundland between 700 and 1450 m depth and monitored in mesocosms for over 2 years. The pycnogonids were found in association with octocorals, hydrozoans and sea anemones. Adult females developed mature oocytes between June and August. Paired mating followed by oviposition occurred between early July and mid-October. Up to three egg masses were brooded by each male. It took a maximum of 4 months for the propagules to hatch from the egg mass. Offspring developed from walking leg-bearing larvae to early juveniles over the next ~5 months before leaving the male's protection. Mating and oviposition coincided with the highest water temperatures of the annual cycle and dispersal of juveniles occurred in spring, when phytodetritus deposition was high and as ocean temperature rose markedly. All the females died after oviposition and the males ~9 months later, after juvenile dispersal. The sex ratio of mature individuals (~55-60 mm leg span) was 2 males for 3 females. Fecundity was estimated to be 184-288 eggs per adult female. Adults of N. hirtipes were seen feeding on hydrozoan polyps, small sea anemones (Stephanauge nexilis) and nudibranchs. Larvae and early juveniles did not feed while brooded by the male. Upon dispersal, their feeding apparatus became functional and they began feeding on hydrozoan polyps. After 13 months of growth post hatching, the juveniles reached ~21 mm leg span. Curve fitting estimated that ~7 years are required to reach the adult size of 55 mm leg span.

Taguchi Optimization of Cutting Parameters in Turning AISI 1020 MS with M2 HSS Tool

NASA Astrophysics Data System (ADS)

Sonowal, Dharindom; Sarma, Dhrupad; Bakul Barua, Parimal; Nath, Thuleswar

2017-08-01

In this paper the effect of three cutting parameters viz. Spindle speed, Feed and Depth of Cut on surface roughness of AISI 1020 mild steel bar in turning was investigated and optimized to obtain minimum surface roughness. All the experiments are conducted on HMT LB25 lathe machine using M2 HSS cutting tool. Ranges of parameters of interest have been decided through some preliminary experimentation (One Factor At a Time experiments). Finally a combined experiment has been carried out using Taguchi’s L27 Orthogonal Array (OA) to study the main effect and interaction effect of the all three parameters. The experimental results were analyzed with raw data ANOVA (Analysis of Variance) and S/N data (Signal to Noise ratio) ANOVA. Results show that Spindle speed, Feed and Depth of Cut have significant effects on both mean and variation of surface roughness in turning AISI 1020 mild steel. Mild two factors interactions are observed among the aforesaid factors with significant effects only on the mean of the output variable. From the Taguchi parameter optimization the optimum factor combination is found to be 630 rpm spindle speed, 0.05 mm/rev feed and 1.25 mm depth of cut with estimated surface roughness 2.358 ± 0.970 µm. A confirmatory experiment was conducted with the optimum factor combination to verify the results. In the confirmatory experiment the average value of surface roughness is found to be 2.408 µm which is well within the range (0.418 µm to 4.299 µm) predicted for confirmatory experiment.

Postpartum weight loss and infant feeding.

PubMed

Haiek, L N; Kramer, M S; Ciampi, A; Tirado, R

2001-01-01

Women are often advised that lactation accelerates loss of the excess weight gained during pregnancy, but the evidence underlying this advice is sparse and conflicting. To help fill this gap, we assessed differences in the rate of postpartum weight loss in the first 9 months postpartum according to method of infant feeding. Two hundred thirty-six women attending two public health clinics in Montreal were weighed in one to four routine infant immunization visits up to the 9th postpartum month. After each weighing, we administered a telephone questionnaire assessing the method of infant feeding (predominantly breast-feeding, mixed-feeding, or predominantly bottle-feeding) and potential confounders. Data were analyzed using unbalanced multivariate repeated measures linear regression. Infant feeding was not associated with statistically significant differences in the rate of weight loss. Gestational weight gain, postpartum smoking, and maternal birthplace were important predictors of postpartum weight change. Although our results cannot exclude an effect of more exclusive or more prolonged breast-feeding, breast-feeding as commonly practiced does not appear to influence the rate of postpartum weight loss. This information should be useful in counseling new or prospective mothers and in avoiding unrealistic expectations.

A multipronged approach is associated with improved breast milk feeding rates in very low birth weight infants of an inner-city hospital.

PubMed

Dereddy, Narendra R; Talati, Ajay J; Smith, Ashley; Kudumula, Ravi; Dhanireddy, Ramasubbareddy

2015-02-01

Breast milk feeding has advantages over formula feeding in premature infants, but its use in them is low. We initiated measures in our inner-city hospital such as starting a dedicated lactation service, counseling the mothers prenatally and postnatally, educating hospital staff, and advocating with our state's Medicaid insurance to provide free home breast pumps. These measures were associated with improvement in our breast milk feeding rates in very low birth weight infants from 22% to 88% over 5 years. This article describes our multipronged approach and can help encourage and guide other units with similar demographics to improve their breast milk feeding rates. © The Author(s) 2014.

Fast, purely growing collisionless reconnection as an eigenfunction problem related to but not involving linear whistler waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bellan, Paul M.

If either finite electron inertia or finite resistivity is included in 2D magnetic reconnection, the two-fluid equations become a pair of second-order differential equations coupling the out-of-plane magnetic field and vector potential to each other to form a fourth-order system. The coupling at an X-point is such that out-of-plane even-parity electric and odd-parity magnetic fields feed off each other to produce instability if the scale length on which the equilibrium magnetic field changes is less than the ion skin depth. The instability growth rate is given by an eigenvalue of the fourth-order system determined by boundary and symmetry conditions. Themore » instability is a purely growing mode, not a wave, and has growth rate of the order of the whistler frequency. The spatial profile of both the out-of-plane electric and magnetic eigenfunctions consists of an inner concave region having extent of the order of the electron skin depth, an intermediate convex region having extent of the order of the equilibrium magnetic field scale length, and a concave outer exponentially decaying region. If finite electron inertia and resistivity are not included, the inner concave region does not exist and the coupled pair of equations reduces to a second-order differential equation having non-physical solutions at an X-point.« less

Co-regulated Approach to Feeding Preterm Infants with Lung Disease: Effects During Feeding

PubMed Central

Thoyre, Suzanne M.; Holditch-Davis, Diane; Schwartz, Todd A.; Melendez Roman, Carlos R.; Nix, William

2015-01-01

Background Very preterm infants are at risk for poor oral feeding endurance, early cessation of eating, poor fluid management with aspiration risk, behavioral distress, and unstable heart rate and oxygenation during feeding. Objective To determine the preliminary effectiveness of a Co-Regulated Approach (CoReg) to oral feeding for very preterm infants at risk for lung disease. Method A randomized, within-subjects, cross-over design was used with 20 very preterm infants requiring oxygen at the start of oral feeding. Infants were bottle fed by the Usual Care approach and by the CoReg approach on 2 consecutive days for an average of four feedings each. Intervention components included co-regulation of suck, swallow, and breathe rhythms using enhanced auditory assessment, infant-guided feeding onsets, and infant positioning in a semielevated, side-lying position. Infant physiology metrics (heart rate, SaO2) were collected continuously prior to and during the feeding. Behavioral and auditory indicators of regulation were coded continuously from videotape during the feeding. Results Seventy feedings were analyzed (38 Usual Care, 32 CoReg) using repeated measures modeling. CoReg feedings were characterized by more frequent preparation of the infant for the feeding, were more commonly initiated in response to infant readiness cues, had more rest periods and breath regulation events, and had fewer sucking stimulation events. CoReg feedings had less SaO2 variability, decline, and time spent in a desaturated state; less heart rate fluctuation and decline; less behavioral disorganization; better fluid management; and less observed effort to breathe. Discussion Support is provided for a co-regulated approach to feeding vulnerable infants. Enhanced auditory assessment of infant feeding rhythms increases the responsiveness of the feeder and improves infant behavioral and physiologic responses. PMID:22565102

A Comparative study between MPC and PI controller to control vacuum distillation unit for producing LVGO, MVGO, and HVGO

NASA Astrophysics Data System (ADS)

Wahid, A.; Prasetyo, A. P.

2018-03-01

This study describes the selection of controllers in the vacuum distillation unit (VDU) between a model predictive control (MPC) and a proportional-integral (PI) controller by comparing the integral square error (ISE) values. Design of VDU in this simulation is based on modified Metso Automation Inc. scheme. Controlled variables in this study are feed flow rate, feed temperature, top stage pressure, condenser level, bottom stage temperature, LVGO (light vacuum gas oil), MVGO (medium vacuum gas oil), and HVGO (heavy vacuum gas oil) flow rate. As a result, control performance improvements occurred as using MPC compared to PI controllers, when testing a set-point change, of feed flow rate control, feed temperature, top-stage pressure, bottom-stage temperature and flow rate of LVGO, MVGO, and HVGO, respectively, 36%, 6%, 92%, 53%, 90%, 96% and 88%. Only on condenser level control PI performs much better than the MPC. So PI controller is used for level condenser control. While for the test of disturbance rejection, by changing feed flow rate by 10%, there is improvement of control performance using MPC compared to PI controller on feed temperature control, top-stage pressure, bottom-stage temperature and flow rate LVGO, MVGO and HVGO 0.3%, 0.7%, 14%, 2.7%, 10.6% and 4.3%, respectively.

Sow and litter response to supplemental dietary fat in lactation diets during high ambient temperatures.

PubMed

Rosero, D S; van Heugten, E; Odle, J; Cabrera, R; Arellano, C; Boyd, R D

2012-02-01

The objective of this experiment was to determine the impact of supplemental dietary fat on total lactation energy intake and sow and litter performance during high ambient temperatures (27 ± 3°C). Data were collected from 337 mixed-parity sows from July to September in a 2,600-sow commercial unit in Oklahoma. Diets were corn-soybean meal-based with 7.5% corn distillers dried grains with solubles and 6.0% wheat middlings and contained 3.24 g of standardized ileal digestible Lys/Mcal of ME. Animal-vegetable fat blend (A-V) was supplemented at 0, 2, 4, or 6%. Sows were balanced by parity, with 113, 109, and 115 sows representing parity 1, 2, and 3 to 7 (P3+), respectively. Feed disappearance (subset of 190 sows; 4.08, 4.18, 4.44, and 4.34 kg/d, for 0, 2, 4, and 6%, respectively; P < 0.05) and apparent caloric intake (12.83, 13.54, 14.78, and 14.89 Mcal of ME/d, respectively; P < 0.001) increased linearly with increasing dietary fat. Gain:feed (sow and litter BW gain relative to feed intake) was not affected (P = 0.56), but gain:Mcal ME declined linearly with the addition of A-V (0.16, 0.15, 0.15, and 0.14 for 0, 2, 4, and 6%, respectively; P < 0.01). Parity 1 sows (3.95 kg/d) had less (P < 0.05) feed disappearance than P2 (4.48 kg/d) and P3+ (4.34 kg/d) sows. Body weight change in P1 sows was greater (P < 0.01) than either P2 or P3+ sows (-0.32 vs. -0.07 and 0.12 kg/d), whereas backfat loss was less (P < 0.05) and loin depth gain was greater (P < 0.05) in P3+ sows compared with P1 and P2 sows. Dietary A-V improved litter ADG (P < 0.05; 1.95, 2.13, 2.07, and 2.31 kg/d for 0, 2, 4, and 6% fat, respectively) only in P3+ sows. Sows bred within 8 d after weaning (58.3, 72.0, 70.2, and 74.7% for 0, 2, 4, and 6%, respectively); conception rate (78.5, 89.5, 89.2, and 85.7%) and farrowing rate (71.4, 81.4, 85.5, and 78.6%) were improved (P < 0.01) by additional A-V, but weaning-to-breeding interval was not affected. Rectal and skin temperature and respiration rate of sows were greater (P < 0.002) when measured at wk 3 compared with wk 1 of lactation, but were not affected by A-V addition. Parity 3+ sows had lower (P < 0.05) rectal temperature than P1 and P2 sows, and respiration rate was reduced (P < 0.001) in P1 sows compared with P2 and P3+ sows. In conclusion, A-V improved feed disappearance and caloric intake, resulting in improved litter weight gain and subsequent reproductive performance of sows; however, feed and caloric efficiency were negatively affected.

Marrying Step Feed with Secondary Clarifier Improvements to Significantly Increase Peak Wet Weather Treatment Capacity: An Integrated Methodology.

PubMed

Daigger, Glen T; Siczka, John S; Smith, Thomas F; Frank, David A; McCorquodale, J A

2017-08-01

  The need to increase the peak wet weather secondary treatment capacity of the City of Akron, Ohio, Water Reclamation Facility (WRF) provided the opportunity to test an integrated methodology for maximizing the peak wet weather secondary treatment capacity of activated sludge systems. An initial investigation, consisting of process modeling of the secondary treatment system and computational fluid dynamics (CFD) analysis of the existing relatively shallow secondary clarifiers (3.3 and 3.7 m sidewater depth in 30.5 m diameter units), indicated that a significant increase in capacity from 416 000 to 684 000 m3/d or more was possible by adding step feed capabilities to the existing bioreactors and upgrading the existing secondary clarifiers. One of the six treatment units at the WRF was modified, and an extensive 2-year testing program was conducted to determine the total peak wet weather secondary treatment capacity achievable. The results demonstrated that a peak wet weather secondary treatment capacity approaching 974 000 m3/d is possible as long as secondary clarifier solids and hydraulic loadings could be separately controlled using the step feed capability provided. Excellent sludge settling characteristics are routinely experienced at the City of Akron WRF, raising concerns that the identified peak wet weather secondary treatment capacity could not be maintained should sludge settling characteristics deteriorate for some reason. Computational fluid dynamics analysis indicated that the impact of the deterioration of sludge settling characteristics could be mitigated and the identified peak wet weather secondary treatment capacity maintained by further use of the step feed capability provided to further reduce secondary clarifier solids loading rates at the identified high surface overflow rates. The results also demonstrated that effluent limits not only for total suspended solids (TSS) and five-day carbonaceous biochemical oxygen demand (cBOD5) could be maintained, but also for ammonia-nitrogen and total phosphorous (TP). Although hydraulic limitations in other parts of the WRP prevent this full capacity to be realized, the City is proceeding to implement the modifications identified using this integrated methodology.

Consumer-based optimization of a third-generation product made from peanut and rice flour.

PubMed

Choi, I-D; Phillips, R D; Resurreccion, A V A

2007-09-01

Indirectly puffed snacks were produced by an extrusion process with partially defatted (12% fat) peanut flour (30%, 40%, 50%) at different levels of screw speed (200, 300, 400 rpm) and feed rate (4, 5, 6 kg/h). Extrudates were dried to obtain half-products (11% to 12% MC) followed by puffing with deep-fat frying. The puffed snack prototypes were subjected to consumer acceptance test. Consumers rated higher than 6.0 (= like slightly) for all products produced within the experimental factor ranges on the attributes of crispness and texture, whereas consumer scores for appearance, color, flavor, and overall liking were lower than 6.0 for the product containing 50% peanut flour regardless of screw speed and feed rate. The product extruded with 50% peanut flour at screw speed of 400 rpm and feed rate of 6 kg/h received the lowest score of 5.5 on overall liking in a 9-point hedonic score. Predicted regression models indicated that feed rate had the largest effect on consumer attributes followed by peanut flour and screw speed. From the superimposed contour plot of individual contour plot of consumer attributes, the optimum region was identified as the area beginning at the 42.0% to 43.0% peanut flour and 4.0 kg/h feed rates, rising to a maximum at 45% peanut flour and 4.6 kg/h feed rates and decreasing to the 33.0% to 34.0% peanut flour and 6.0 kg/h feed rates. Verification confirmed the ability of predictive regression models to identify peanut-based snacks, which would be scored higher than 6.0 by consumer evaluation.

Feed rate measuring method and system

DOEpatents

Novak, J.L.; Wiczer, J.J.

1995-12-05

A system and method are provided for establishing the feed rate of a workpiece along a feed path with respect to a machine device. First and second sensors each having first and second sensing electrodes which are electrically isolated from the workpiece are positioned above, and in proximity to the desired surfaces of the workpiece along a feed path. An electric field is developed between the first and second sensing electrodes of each sensor and capacitance signals are developed which are indicative of the contour of the workpiece. First and second image signals representative of the contour of the workpiece along the feed path are developed by an image processor. The time delay between corresponding portions of the first and second image signals are then used to determine the feed rate based upon the separation of the first and second sensors and the amount of time between corresponding portions of the first and second image signals. 18 figs.

Feed rate measuring method and system

DOEpatents

Novak, James L.; Wiczer, James J.

1995-01-01

A system and method are provided for establishing the feed rate of a workpiece along a feed path with respect to a machine device. First and second sensors each having first and second sensing electrodes which are electrically isolated from the workpiece are positioned above, and in proximity to the desired surfaces of the workpiece along a feed path. An electric field is developed between the first and second sensing electrodes of each sensor and capacitance signals are developed which are indicative of the contour of the workpiece. First and second image signals representative of the contour of the workpiece along the feed path are developed by an image processor. The time delay between corresponding portions of the first and second image signals are then used to determine the feed rate based upon the separation of the first and second sensors and the amount of time between corresponding portions of the first and second image signals.

Spatial and temporal infaunal dynamics of the Blanes submarine canyon-slope system (NW Mediterranean); changes in nematode standing stocks, feeding types and gender-life stage ratios

NASA Astrophysics Data System (ADS)

Ingels, Jeroen; Vanreusel, Ann; Romano, Chiara; Coenjaerts, Johan; Mar Flexas, M.; Zúñiga, Diana; Martin, Daniel

2013-11-01

Despite recent advances in the knowledge of submarine canyons ecosystems, our understanding of the faunal patterns and processes in these environments is still marginal. In this study, meiobenthic nematode communities (from 300 m to 1600 m depth) obtained in November 2003 and May 2004 at eight stations inside and outside Blanes submarine canyon were analysed for nematode standing stocks (SSs), feeding types and gender-life stage distributions. Environmental data were obtained by sediment traps and current meters, attached to moorings (April 2003-May 2004), and sediments samples analysed for biogeochemistry and grain size (May 2004). In November 2003, nematode SSs decreased with increasing depth (367.2 individuals and 7.31 μg C per 10 cm2 at 388 m water depth to 7.7 individuals and 0.18 μg C per 10 cm2 at 1677 m water depth), showing a significant negative relation (abundance: R2 = 0.620, p = 0.020; biomass: R2 = 0.512, p = 0.046). This was not the case in May 2004 (283.5 individuals and 3.53 μg C per 10 cm2 at 388 m water depth to 490.8 individuals and 4.93 μg C per 10 cm2 at 1677 m water depth; abundance: R2 = 0.003, p = 0.902; biomass: R2 = 0.052, p = 0.587), suggesting a temporal effect that overrides the traditional decrease of SSs with increasing water depth. Both water depth and sampling time played a significant role in explaining nematode SSs, but with differences between stations. No overall differences were observed between canyon and open slope stations. Nematode standing stock (SS) patterns can be explained by taking into account the interplay of phytodetrital input and disturbance events, with station differences such as topography playing an important role. Individual nematode size decreased from November 2003 to May 2004 and was explained by a food-induced genera shift and/or a food-induced transition from a ‘latent’ to a ‘reproductive’ nematode community. Our results suggest that size patterns in nematode communities are not solely governed by trophic conditions over longer periods of time in relatively food-rich environments such as canyons. We hypothesize that food pulses in a dynamic and topographical heterogeneous environment such as canyons regulate nematode size distributions, rather than long-term food availability. Feeding type distributions in the Blanes Canyon did not clearly resemble those from other canyon systems, apart from the spring assemblage at one station in the head of the canyon.

Migration Pathways, Behavioural Thermoregulation and Overwintering Grounds of Blue Sharks in the Northwest Atlantic

PubMed Central

Campana, Steven E.; Dorey, Anna; Fowler, Mark; Joyce, Warren; Wang, Zeliang; Yashayaev, Igor

2011-01-01

The blue shark Prionace glauca is the most abundant large pelagic shark in the Atlantic Ocean. Although recaptures of tagged sharks have shown that the species is highly migratory, migration pathways towards the overwintering grounds remain poorly understood. We used archival satellite pop-up tags to track 23 blue sharks over a mean period of 88 days as they departed the coastal waters of North America in the autumn. Within 1–2 days of entering the Gulf Stream (median date of 21 Oct), all sharks initiated a striking diel vertical migration, taking them from a mean nighttime depth of 74 m to a mean depth of 412 m during the day as they appeared to pursue vertically migrating squid and fish prey. Although functionally blind at depth, calculations suggest that there would be a ∼2.5-fold thermoregulatory advantage to swimming and feeding in the markedly cooler deep waters, even if there was any reduced foraging success associated with the extreme depth. Noting that the Gulf Stream current speeds are reduced at depth, we used a detailed circulation model of the North Atlantic to examine the influence of the diving behaviour on the advection experienced by the sharks. However, there was no indication that the shark diving resulted in a significant modification of their net migratory pathway. The relative abundance of deep-diving sharks, swordfish, and sperm whales in the Gulf Stream and adjacent waters suggests that it may serve as a key winter feeding ground for large pelagic predators in the North Atlantic. PMID:21373198

Shark predation on cephalopods in the Mexican and Ecuadorian Pacific Ocean

NASA Astrophysics Data System (ADS)

Galván-Magaña, Felipe; Polo-Silva, Carlos; Berenice Hernández-Aguilar, Sandra; Sandoval-Londoño, Alejandro; Ruth Ochoa-Díaz, Maria; Aguilar-Castro, Nallely; Castañeda-Suárez, David; Cabrera Chavez-Costa, Alejandra; Baigorrí-Santacruz, Álvaro; Eden Torres-Rojas, Yassir; Andrés Abitia-Cárdenas, Leonardo

2013-10-01

Pelagic predators such as sharks have been shown to be effective cephalopod samplers, because they have high consumption rates and swimming speeds. The stomach contents of these predators allow us to determine the distribution and abundance of cephalopods, considering the scarcity of biological information and the difficulty of catching squids and octopi using traditional methods. The silky shark (Carcharhinus falciformis), blue shark (Prionace glauca), scalloped hammerhead (Sphyrna lewini), smooth hammerhead (Sphyrna zygaena), pelagic thresher shark (Alopias pelagicus), and bigeye thresher shark (Alopias superciliosus) were caught off both coasts of Baja California Sur, Mexico, and in the Ecuadorian Pacific Ocean. Cephalopod sizes (mantle lengths, ML) were calculated based on the beak measurements to determine the size of cephalopods consumed by the sharks. We identified 21 cephalopod species based on beak items found in the shark stomachs. The most abundant cephalopods consumed by sharks in both areas were Dosidicus gigas, Ancistrocheirus lesueurii, Onychoteuthis banksii, Sthenoteuthis ovalaniensis, Argonauta spp., Abraliopsis affinis, and Mastigoteuthis dentata. The cephalopod's habitat provides information about the depth at which these sharks capture their prey. The blue shark feeds on cephalopods in epipelagic, mesopelagic, and bathypelagic waters; the silky shark feeds on cephalopods in epipelagic waters; and the scalloped hammerhead shark preys on cephalopods in neritic (bottom) and oceanic waters (epipelagic and mesopelagic). The pelagic thresher shark consumed epipelagic and neritic species; whereas the bigeye thresher shark feeds mainly on epipelagic and mesopelagic squids in Ecuadorian waters. The smooth hammerhead preys on epipelagic and mesopelagic squids off Mexico and Ecuador.

Breast Milk Feeding Rates in Patients With Cleft Lip and Palate at a North American Craniofacial Center.

PubMed

Alperovich, Michael; Frey, Jordan D; Shetye, Pradip R; Grayson, Barry H; Vyas, Raj M

2017-05-01

  Our study goal was to evaluate the rates of breast milk feeding among patients with oral clefts at a large North American Craniofacial Center.   Parents of patients with oral clefts born from 2000 to 2012 and treated at our center were interviewed regarding cleft diagnosis, counseling received for feeding, and feeding habits.   Data were obtained from parents of 110 patients with oral clefts. Eighty-four percent of parents received counseling for feeding a child with a cleft. Sixty-seven percent of patients received breast milk for some period of time with a mean duration of 5.3 months (range 0.25 to 18 months). When used, breast milk constituted the majority of the diet with a mean percentage of 75%. Breast milk feeding rates increased successively over the 13-year study period. The most common method of providing breast milk was the Haberman feeder at 75% with other specialty cleft bottles composing an additional 11%. Parents who received counseling were more likely to give breast milk to their infant (P = .02). Duration of NasoAlveolar Molding prior to cleft lip repair did not affect breast milk feeding length (P = .72). Relative to patients with cleft lip and palate, patients with isolated cleft lip had a breast milk feeding odds ratio of 1.71.   We present breast milk feeding in the North American cleft population. Although still lower than the noncleft population, breast milk feeding with regards to initiation rate, length of time, and proportion of total diet is significantly higher than previously reported.

Dietary supplementation of L-glutamine and L-glutamate in broiler chicks subjected to delayed placement.

PubMed

Zulkifli, I; Shakeri, M; Soleimani, A F

2016-12-01

This study was conducted to investigate the effect of dietary glutamine (Gln) + glutamic acid (Glu) supplementation on growth performance and physiological stress response in broiler chickens subjected to 24 h delay in placement. Equal number of day-old broiler chicks were assigned to either immediate placement or with 24 h delay in placement with no access to feed and water. Chicks from each placement group were fed either standard starter diet (control) or standard starter diet +1% AminoGut (AG; mixture of 10% Gln and 10% Glu) from 1 to 21 d. Blood and duodenal samples were collected at 21 d for analysis of serum levels of ceruloplasmin (CER), ovotransferin (OVT) and α-1 acid glycoprotein (AGP), duodenal heat shock protein (HSP) 70 expression, and villi length and crypt depth. Results showed that delayed placement for 24 h was detrimental to weight gain during the starter phase (1 to 21 d) but not thereafter. AG supplementation was not able to eliminate that reduction in weight gain and feed intake during the starter stage. However, the observed enhancement in villi length and crypt depth at d 21 resulted in improvement of FCR and weight gain during the finisher stage (22 to 42 d) and consequently the overall period (1 to 42 d). Broiler chickens supplemented with AG also showed lower mortality rate, and higher AGP, OVT, CER, and HSP 70 expression compared to their control counterparts. Based on AGP, OVT, CER, and HSP 70 expression, there is no indication that delayed placement was physiologically stressful to the broiler chickens at 21 d of age. © 2016 Poultry Science Association Inc.

Breeding objectives for pigs in Kenya. II: economic values incorporating risks in different smallholder production systems.

PubMed

Mbuthia, Jackson Mwenda; Rewe, Thomas Odiwuor; Kahi, Alexander Kigunzu

2015-02-01

This study estimated economic values for production traits (dressing percentage (DP), %; live weight for growers (LWg), kg; live weight for sows (LWs), kg) and functional traits (feed intake for growers (FEEDg), feed intake for sow (FEEDs), preweaning survival rate (PrSR), %; postweaning survival (PoSR), %; sow survival rate (SoSR), %, total number of piglets born (TNB) and farrowing interval (FI), days) under different smallholder pig production systems in Kenya. Economic values were estimated considering two production circumstances: fixed-herd and fixed-feed. Under the fixed-herd scenario, economic values were estimated assuming a situation where the herd cannot be increased due to other constraints apart from feed resources. The fixed-feed input scenario assumed that the herd size is restricted by limitation of feed resources available. In addition to the tradition profit model, a risk-rated bio-economic model was used to derive risk-rated economic values. This model accounted for imperfect knowledge concerning risk attitude of farmers and variance of input and output prices. Positive economic values obtained for traits DP, LWg, LWs, PoSR, PrSR, SoSR and TNB indicate that targeting them in improvement would positively impact profitability in pig breeding programmes. Under the fixed-feed basis, the risk-rated economic values for DP, LWg, LWs and SoSR were similar to those obtained under the fixed-herd situation. Accounting for risks in the EVs did not yield errors greater than ±50 % in all the production systems and basis of evaluation meaning there would be relatively little effect on the real genetic gain of a selection index. Therefore, both traditional and risk-rated models can be satisfactorily used to predict profitability in pig breeding programmes.

The prevalence and determinants of breast-feeding initiation and duration in a sample of women in Ireland.

PubMed

Tarrant, Roslyn C; Younger, Katherine M; Sheridan-Pereira, Margaret; White, Martin J; Kearney, John M

2010-06-01

To assess breast-feeding initiation and prevalence from birth to 6 months in a sample of mothers in Dublin, and to determine the factors associated with breast-feeding initiation and 'any' breast-feeding at 6 weeks in a sample of Irish-national mothers. This prospective cross-sectional study involved the recruitment of women during the antenatal period, with subsequent follow-up of mothers who delivered healthy, term singleton infants, at 6 weeks and 6 months postpartum. Participants were recruited from antenatal clinics in the Coombe Women and Infants University Hospital, Dublin. In all, 401 Irish-national and forty-nine non-Irish-national mothers met the criteria for inclusion in the present study. Breast-feeding initiation rates of the Irish-national and non-Irish-nationals were 47% and 79.6%, respectively. Factors that were significantly (P = 0.000) associated with both breast-feeding initiation and 'any' breast-feeding at 6 weeks included mothers who were >or=35 years, educated to third level, reported positive postnatal encouragement to breast-feed from their partners and had a positive antenatal intention to breast-feed. The maternal negative perception that breast-feeding is an embarrassing way to feed an infant was demonstrated as a major barrier to initiation. Breast-feeding initiation and prevalence rates of the Irish-national population remain low and lag considerably behind national and international targets. Inclusion of the partner in breast-feeding promotional initiatives during the antenatal period may be crucial to increase breast-feeding rates in Ireland. Public health campaigns that focus on increasing the social acceptability of breast-feeding may prove effective in addressing this cultural barrier.

Early development and the point of no return in pikeperch ( Sander lucioperca L.) larvae

NASA Astrophysics Data System (ADS)

Xu, Zhengchao; Li, Caijuan; Ling, Qufei; Gaughan, Sarah; Wang, Guocheng; Han, Xiaofei

2017-11-01

The objectives of the present study were to evaluate the yolk-sac and oil globule absorption and point of no return (PNR) of pikeperch ( Sander lucioperca L.) larvae. Artificial propagation of pikeperch was performed at (15±2)°C. Yolk-sac absorption, oil globule absorption, larval growth and the first initial feeding rate were observed to analyze the early growth and to determine the PNR of pikeperch larvae. The total length of newly hatched (0 day after hatching, DAH) pikeperch larvae was (4.25±0.22) mm and the volume of the yolk-sac and the oil globule was (0.30±0.12) mm3 and (5.14±2.28) 10-2 mm3 respectively. The yolk-sac and the oil globule were exhausted at 11 DAH and 14 DAH, respectively. Pikeperch larvae began feeding at 8 DAH with an initial feeding rate about 10.0%. From 9 to 14 DAH, the initial feeding rate increased rapidly, and reached its highest (about 82.7%) at 14 DAH. It declined thereafter, 48.9% at 15 DAH and 35.6% at 16 DAH, thus the pikeperch larvae reached PNR by 15-16 DAH. The appropriate first feeding time for the pikeperch larvae is 11-12 DAH, when the initial feeding rate is higher than half of the maximum initial feeding rate.

Good breastfeeding policies -- good breastfeeding rates.

PubMed

1998-01-01

In Norway, where breast-feeding policies protecting breast-feeding women's needs have been in place since the 1970s, approximately 97% of women breast feed when leaving the hospital, 80% are breast feeding at 3 months, and 20% beyond 12 months. Government family policies play an important role in enabling women to achieve good breast-feeding rates. In Norway: maternity leave is 42 weeks with full pay or 52 weeks with 80% of salary; flexible part-time is available for women from 2 months after giving birth with income supplemented from maternity benefits; after returning to work, women are entitled to 1- to 1.5-hour breaks to return home to breast feed, or to have the child brought to work. "Breast feeding is so normal," writes Hege Jacobson Lepri, "it's more embarrassing to bring out the feeding bottle in public." full text

A survey on difficulties and desires of breast-feeding women in Wuhan, China.

PubMed

Ouyang, Yan-Qiong; Su, Min; Redding, Sharon R

2016-06-01

exclusive breast feeding in China is relatively low and no research has been conducted to explore the difficulties and desires of Chinese lactating mothers. Currently, Chinese women turn to massage therapists to increase breastmilk volume, implying that many breast-feeding women faced problems but had few support mechanisms.This study aimed to explore the difficulties and desires of Chinese breast-feeding women and to propose strategies for increasing the rate of exclusive breast feeding. three hundred and seventy-five primiparous women were recruited from two randomized cluster communities in Wuhan following ethical approval. Face-to-face semistructured interviews were conducted with 76 of the participants to collect data on their infants' feeding status, duration of exclusive breast feeding, reasons for stopping, difficulties encountered, and sources of support for lactation. the breast feeding initiation rate was 93.6%, but exclusive breast feeding was only 6.2% at six months. The most frequently cited reason for giving up exclusive breast feeding was perceived breastmilk insufficiency. Women cited a desire for professional and individualised instruction from following resources: (1) lactation consultants in hospital and communities; (2) Qualified cuirushi; (3) breast feeding website;(4) Relatives, friends and peers;(5) Telephone hotline. to improve the rate and duration of exclusive breast feeding in China, effective and available resources must be available. Timely,professional and face-to-face lactation counselling such as lactation consultant, qualified cuirushin is needed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Predation on the Invasive Copepod, Pseudodiaptomus forbesi, and Native Zooplankton in the Lower Columbia River: An Experimental Approach to Quantify Differences in Prey-Specific Feeding Rates

PubMed Central

Adams, Jesse B.; Bollens, Stephen M.; Bishop, John G.

2015-01-01

Invasive planktonic crustaceans have become a prominent feature of aquatic communities worldwide, yet their effects on food webs are not well known. The Asian calanoid copepod, Pseudodiaptomus forbesi, introduced to the Columbia River Estuary approximately 15 years ago, now dominates the late-summer zooplankton community, but its use by native aquatic predators is unknown. We investigated whether three species of planktivorous fishes (chinook salmon, three-spined stickleback, and northern pikeminnow) and one species of mysid exhibited higher feeding rates on native copepods and cladocerans relative to P. forbesi by conducting `single-prey’ feeding experiments and, additionally, examined selectivity for prey types with `two-prey’ feeding experiments. In single-prey experiments individual predator species showed no difference in feeding rates on native cyclopoid copepods (Cyclopidae spp.) relative to invasive P. forbesi, though wild-collected predators exhibited higher feeding rates on cyclopoids when considered in aggregate. In two-prey experiments, chinook salmon and northern pikeminnow both strongly selected native cladocerans (Daphnia retrocurva) over P. forbesi, and moreover, northern pikeminnow selected native Cyclopidae spp. over P. forbesi. On the other hand, in two-prey experiments, chinook salmon, three-spined stickleback and mysids were non- selective with respect to feeding on native cyclopoid copepods versus P. forbesi. Our results indicate that all four native predators in the Columbia River Estuary can consume the invasive copepod, P. forbesi, but that some predators select for native zooplankton over P. forbesi, most likely due to one (or both) of two possible underlying casual mechanisms: 1) differential taxon-specific prey motility and escape responses (calanoids > cyclopoids > daphnids) or 2) the invasive status of the zooplankton prey resulting in naivety, and thus lower feeding rates, of native predators feeding on invasive prey. PMID:26618851

Every three-hour versus every six-hour oral feeding in preterm infants: a randomised clinical trial.

PubMed

Gray, Megan M; Medoff-Cooper, Barbara; Enlow, Elizabeth M; Mukhopadhyay, Sagori; DeMauro, Sara B

2017-02-01

This trial compares two oral feeding schedules, every three-hour and every six-hour oral feeding attempts, to determine which schedule allows for more rapid attainment of full oral feeding in preterm infants. Infants born at ≤33-week gestation were randomly assigned to receive oral feeding every three hours or every six hours if feeding cues were present. The primary outcome was time to full oral feeding; secondary outcomes include respiratory and apnoea rates, growth and length of stay. A total of 55 infants were recruited. There was no difference between the groups in the primary or secondary outcomes. For preterm infants fed when oral feeding cues are present, an every six-hour schedule did not alter the time to full oral feeding and had no effect on rates of tachypnoea, apnoea or length of hospital stay compared to every three-hour feeding schedule. An every six-hour oral feeding schedule led to only small reductions in number of oral feeding attempts per day. ©2016 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Effect of cutting parameters on surface finish and machinability of graphite reinforced Al-8011 matrix composite

NASA Astrophysics Data System (ADS)

Anil, K. C.; Vikas, M. G.; Shanmukha Teja, B.; Sreenivas Rao, K. V.

2017-04-01

Many materials such as alloys, composites find their applications on the basis of machinability, cost and availability. In the present work, graphite (Grp) reinforced Aluminium 8011 is synthesized by convention stir casting process and Surface finish & machinability of prepared composite is examined by using lathe tool dynamometer attached with BANKA Lathe by varying the machining parameters like spindle speed, Depth of cut and Feed rate in 3 levels. Also, Roughness Average (Ra) of machined surfaces is measured by using Surface Roughness Tester (Mitutoyo SJ201). From the studies it is cleared that mechanical properties of a composites increases with addition of Grp and The cutting force were decreased with the reinforcement percentage and thus increases the machinability of composites and also results in increased surface finish.

Protocol for a feasibility trial for improving breast feeding initiation and continuation: assets-based infant feeding help before and after birth (ABA)

PubMed Central

Jolly, Kate; Ingram, Jenny; Clarke, Joanne; Johnson, Debbie; Trickey, Heather; Thomson, Gill; Dombrowski, Stephan U; Sitch, Alice; Dykes, Fiona; Feltham, Max G; Darwent, Kirsty; MacArthur, Christine; Roberts, Tracy

2018-01-01

Introduction Breast feeding improves the health of mothers and infants; the UK has low rates, with marked socioeconomic inequalities. While trials of peer support services have been effective in some settings, UK trials have not improved breast feeding rates. Qualitative research suggests that many women are alienated by the focus on breast feeding. We propose a change from breast feeding-focused interactions to respecting a woman’s feeding choices, inclusion of behaviour change theory and an increased intensity of contacts in the 2 weeks after birth when many women cease to breast feed. This will take place alongside an assets-based approach that focuses on the positive capability of individuals, their social networks and communities. We propose a feasibility study for a multicentre randomised controlled trial of the Assets feeding help Before and After birth (ABA) infant feeding service versus usual care. Methods and analysis A two-arm, non-blinded randomised feasibility study will be conducted in two UK localities. Women expecting their first baby will be eligible, regardless of feeding intention. The ABA infant feeding intervention will apply a proactive, assets-based, woman-centred, non-judgemental approach, delivered antenatally and postnatally tailored through face-to-face contacts, telephone and SMS texts. Outcomes will test the feasibility of delivering the intervention with recommended intensity and duration to disadvantaged women; acceptability to women, feeding helpers and professionals; and feasibility of a future randomised controlled trial (RCT), detailing recruitment rates, willingness to be randomised, follow-up rates at 3 days, 8 weeks and 6 months, and level of outcome completion. Outcomes of the proposed full trial will also be collected. Mixed methods will include qualitative interviews with women/partners, feeding helpers and health service staff; feeding helper logs; and review of audio-recorded helper–women interactions to assess intervention fidelity. Ethics and dissemination Study results will inform the design of a larger multicentre RCT. The National Research Ethics Service Committee approved the study protocol. Trial registration number ISRCTN14760978; Pre-results. PMID:29362263

Protocol for a feasibility trial for improving breast feeding initiation and continuation: assets-based infant feeding help before and after birth (ABA).

PubMed

Jolly, Kate; Ingram, Jenny; Clarke, Joanne; Johnson, Debbie; Trickey, Heather; Thomson, Gill; Dombrowski, Stephan U; Sitch, Alice; Dykes, Fiona; Feltham, Max G; Darwent, Kirsty; MacArthur, Christine; Roberts, Tracy; Hoddinott, Pat

2018-01-23

Breast feeding improves the health of mothers and infants; the UK has low rates, with marked socioeconomic inequalities. While trials of peer support services have been effective in some settings, UK trials have not improved breast feeding rates. Qualitative research suggests that many women are alienated by the focus on breast feeding. We propose a change from breast feeding-focused interactions to respecting a woman's feeding choices, inclusion of behaviour change theory and an increased intensity of contacts in the 2 weeks after birth when many women cease to breast feed. This will take place alongside an assets-based approach that focuses on the positive capability of individuals, their social networks and communities.We propose a feasibility study for a multicentre randomised controlled trial of the Assets feeding help Before and After birth (ABA) infant feeding service versus usual care. A two-arm, non-blinded randomised feasibility study will be conducted in two UK localities. Women expecting their first baby will be eligible, regardless of feeding intention. The ABA infant feeding intervention will apply a proactive, assets-based, woman-centred, non-judgemental approach, delivered antenatally and postnatally tailored through face-to-face contacts, telephone and SMS texts. Outcomes will test the feasibility of delivering the intervention with recommended intensity and duration to disadvantaged women; acceptability to women, feeding helpers and professionals; and feasibility of a future randomised controlled trial (RCT), detailing recruitment rates, willingness to be randomised, follow-up rates at 3 days, 8 weeks and 6 months, and level of outcome completion. Outcomes of the proposed full trial will also be collected. Mixed methods will include qualitative interviews with women/partners, feeding helpers and health service staff; feeding helper logs; and review of audio-recorded helper-women interactions to assess intervention fidelity. Study results will inform the design of a larger multicentre RCT. The National Research Ethics Service Committee approved the study protocol. ISRCTN14760978; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Infant and young child feeding indicators across nine East and Southeast Asian countries: an analysis of National Survey Data 2000-2005.

PubMed

Dibley, Michael J; Senarath, Upul; Agho, Kingsley E

2010-09-01

To compare infant and young child feeding practices in children aged 0-23 months across nine East and Southeast Asian countries. Secondary analyses of cross-sectional data from available Demographic and Health Surveys (DHS; Indonesia, Philippines, Timor-Leste, Cambodia and Vietnam), Multiple Indicator Country Surveys (Lao People's Democratic Republic (Lao PDR) and Myanmar) and national nutrition surveys (Democratic People's Republic of Korea (DPR Korea) and Mongolia) conducted between 2000 and 2005. Seven countries from Southeast Asia and two from East Asia. Children aged 0-23 months with samples ranging from 826 to 5610 for DHS, and from 477 to 5860 for non-DHS data. More than 93 % of infants were ever breast-fed, and over 75 % were currently breast-fed except in the Philippines. Timely initiation of breast-feeding varied from 32 % in Indonesia to 46 % in Timor-Leste. Exclusive breast-feeding (EBF) rate in infants under 6 months of age ranged from 11 % in Myanmar to 60 % in Cambodia. EBF rates were also low in Vietnam (15.5 %) and Lao PDR (23 %), and varied between 30 % and 40 % in Indonesia, Philippines and Timor-Leste. The proportion of infants under 6 months of age who were given breast milk with non-milk liquids was high except in Indonesia and Timor-Leste. Bottle-feeding rates were lower in DPR Korea (3 %), Lao PDR (6 %) and Myanmar (6 %) and higher in the Philippines (49 %) and Mongolia (31 %). Timely complementary-feeding rate varied widely across countries (6-99 %). All the countries studied should make greater efforts to improve timely initiation of breast-feeding and EBF for 6 months. Measures should be taken to reduce high bottle-feeding rate in the Philippines, Mongolia, Indonesia and Vietnam, and improve complementary-feeding rate in Lao PDR, Myanmar, DPR Korea and Philippines.

Self-mixing of fly larvae during feeding

NASA Astrophysics Data System (ADS)

Shishkov, Olga; Johnson, Christopher; Zhang, Bryan; Hu, David

2016-11-01

How do we sustainably feed a growing world population? One solution of increasing interest is the use of black solider fly larvae, pea-sized grubs envisioned to transform hundreds of tons of food waste into a sustainable protein source. Although startups across the world are raising these larvae, a physical understanding of how they should be raised and fed remains missing. In this study, we present experiments measuring their feeding rate as a function of number of larvae. We show that larger groups of larvae have greater mixing which entrains hungry larvae around the food, increasing feeding rate. Feeding of larvae thus differs from feeding of cattle or other livestock which exhibit less self-mixing.

Self mixing of fly larvae during feeding

NASA Astrophysics Data System (ADS)

Shishkov, Olga; Johnson, Christopher; Hu, David

How do we sustainably feed a growing world population? One solution of increasing interest is the use of black solider fly larvae, pea-sized grubs envisioned to transform hundreds of tons of food waste into a sustainable protein source. Although startups across the world are raising these larvae, a physical understanding of how they should be raised and fed remains missing. In this study, we present experiments measuring their feeding rate as a function of number of larvae. We show that larger groups of larvae have greater mixing which entrains hungry larvae around the food, increasing feeding rate. Feeding of larvae thus differs from feeding of cattle or other livestock which exhibit less self-mixing.

Sociocultural influences on the determinants of breast-feeding by Latina mothers in the Cincinnati area.

PubMed

Vaughn, Lisa M; Ireton, Candace; Geraghty, Sheela R; Diers, Tiffiny; Niño, Vanessa; Falciglia, Grace A; Valenzuela, Jessica; Mosbaugh, Christine

2010-01-01

While breast-feeding initiation and duration among US Latina women appear to decrease with acculturation, health care providers in the Greater Cincinnati area have noted lower rates of breast-feeding among even first-generation Latina immigrants. This study's purpose was to identify determinants of breast-feeding for Latina mothers in Cincinnati through qualitative interviews and Spanish Breastfeeding Self-Efficacy Scale ratings. Our findings suggest that, along with similar levels of breast-feeding self-confidence, foreign-born Latina women in the Greater Cincinnati area share similar breast-feeding determinants with the general population. However, characteristics of these determinants and their impact vary because of unique pressures experienced by this community.

Upward migration of Vesuvius magma chamber over the past 20,000 years.

PubMed

Scaillet, B; Pichavant, M; Cioni, R

2008-09-11

Forecasting future eruptions of Vesuvius is an important challenge for volcanologists, as its reawakening could threaten the lives of 700,000 people living near the volcano. Critical to the evaluation of hazards associated with the next eruption is the estimation of the depth of the magma reservoir, one of the main parameters controlling magma properties and eruptive style. Petrological studies have indicated that during past activity, magma chambers were at depths between 3 and 16 km (refs 3-7). Geophysical surveys have imaged some levels of seismic attenuation, the shallowest of which lies at 8-9 km depth, and these have been tentatively interpreted as levels of preferential magma accumulation. By using experimental phase equilibria, carried out on material from four main explosive events at Vesuvius, we show here that the reservoirs that fed the eruptive activity migrated from 7-8 km to 3-4 km depth between the ad 79 (Pompeii) and ad 472 (Pollena) events. If data from the Pomici di Base event 18.5 kyr ago and the 1944 Vesuvius eruption are included, the total upward migration of the reservoir amounts to 9-11 km. The change of preferential magma ponding levels in the upper crust can be attributed to differences in the volatile content and buoyancy of ascending magmas, as well as to changes in local stress field following either caldera formation or volcano spreading. Reservoir migration, and the possible influence on feeding rates, should be integrated into the parameters used for defining expected eruptive scenarios at Vesuvius.

Drag, but not buoyancy, affects swim speed in captive Steller sea lions

PubMed Central

Suzuki, Ippei; Sato, Katsufumi; Fahlman, Andreas; Naito, Yasuhiko; Miyazaki, Nobuyuki; Trites, Andrew W.

2014-01-01

ABSTRACT Swimming at an optimal speed is critical for breath-hold divers seeking to maximize the time they can spend foraging underwater. Theoretical studies have predicted that the optimal swim speed for an animal while transiting to and from depth is independent of buoyancy, but is dependent on drag and metabolic rate. However, this prediction has never been experimentally tested. Our study assessed the effects of buoyancy and drag on the swim speed of three captive Steller sea lions (Eumetopias jubatus) that made 186 dives. Our study animals were trained to dive to feed at fixed depths (10–50 m) under artificially controlled buoyancy and drag conditions. Buoyancy and drag were manipulated using a pair of polyvinyl chloride (PVC) tubes attached to harnesses worn by the sea lions, and buoyancy conditions were designed to fall within the natural range of wild animals (∼12–26% subcutaneous fat). Drag conditions were changed with and without the PVC tubes, and swim speeds were recorded and compared during descent and ascent phases using an accelerometer attached to the harnesses. Generalized linear mixed-effect models with the animal as the random variable and five explanatory variables (body mass, buoyancy, dive depth, dive phase, and drag) showed that swim speed was best predicted by two variables, drag and dive phase (AIC = −139). Consistent with a previous theoretical prediction, the results of our study suggest that the optimal swim speed of Steller sea lions is a function of drag, and is independent of dive depth and buoyancy. PMID:24771620

Primary prevention of HTLV-I in Japan.

PubMed

Hino, S; Katamine, S; Miyata, H; Tsuji, Y; Yamabe, T; Miyamoto, T

1996-01-01

The ATL prevention program (AAP) in the Nagasaki Prefecture since 1987 consists of screening of pregnant women and asking the seropositives to refrain from breast-feeding. We screened approximately 90% of gravidas in the Prefecture and > 90% of the seropositive women agreed not to breast-feed. The maternal transmission rate dropped from approximately 20% to approximately 3%. PCR of cord bloods showed that 2.5% were PCR-positive. However, among formula-fed children, none of the cord-positives seroconverted, and none of the seropositives tested had been cord-positive. Breast-feeding for less than six months decreased the transmission rate significantly, but may have a higher transmission rate than the formula feeding.

Vigilance and feeding behaviour in large feeding flocks of laughing gulls, Larus atricilla, on Delaware Bay

NASA Astrophysics Data System (ADS)

Burger, Joanna; Gochfeld, Michael

1991-02-01

Laughing gulls ( Larus atricilla) forage on horseshoe crab ( Limulus polyphemus) eggs during May in Delaware Bay each year. They feed in dense flocks, and foraging rates vary with vigilance, bird density, number of steps and location in the flock, whereas time devoted to vigilance is explained by number of steps, density, location and feeding rates. The time devoted to vigilance decreases with increasing density, increasing foraging rates and decreasing aggression. Birds foraging on the edge of flocks take fewer pecks and more steps, and devote more time to vigilance than those in the intermediate or central parts of a flock.

Linking oceanic food webs to coastal production and growth rates of Pacific salmon ( Oncorhynchus spp.), using models on three scales

NASA Astrophysics Data System (ADS)

Aydin, Kerim Y.; McFarlane, Gordon A.; King, Jacquelynne R.; Megrey, Bernard A.; Myers, Katherine W.

2005-03-01

Three independent modeling methods—a nutrient-phytoplankton-zooplankton (NPZ) model (NEMURO), a food web model (Ecopath/Ecosim), and a bioenergetics model for pink salmon ( Oncorhynchus gorbuscha)—were linked to examine the relationship between seasonal zooplankton dynamics and annual food web productive potential for Pacific salmon feeding and growing in the Alaskan subarctic gyre ecosystem. The linked approach shows the importance of seasonal and ontogenetic prey switching for zooplanktivorous pink salmon, and illustrates the critical role played by lipid-rich forage species, especially the gonatid squid Berryteuthis anonychus, in connecting zooplankton to upper trophic level production in the subarctic North Pacific. The results highlight the need to uncover natural mechanisms responsible for accelerated late winter and early spring growth of salmon, especially with respect to climate change and zooplankton bloom timing. Our results indicate that the best match between modeled and observed high-seas pink salmon growth requires the inclusion of two factors into bioenergetics models: (1) decreasing energetic foraging costs for salmon as zooplankton are concentrated by the spring shallowing of pelagic mixed-layer depth and (2) the ontogenetic switch of salmon diets from zooplankton to squid. Finally, we varied the timing and input levels of coastal salmon production to examine effects of density-dependent coastal processes on ocean feeding; coastal processes that place relatively minor limitations on salmon growth may delay the seasonal timing of ontogenetic diet shifts and thus have a magnified effect on overall salmon growth rates.

Optimization of cutting parameters in CNC turning of stainless steel 304 with TiAlN nano coated carbide cutting tool

NASA Astrophysics Data System (ADS)

Durga Prasada Rao, V.; Harsha, N.; Raghu Ram, N. S.; Navya Geethika, V.

2018-02-01

In this work, turning was performed to optimize the surface finish or roughness (Ra) of stainless steel 304 with uncoated and coated carbide tools under dry conditions. The carbide tools were coated with Titanium Aluminium Nitride (TiAlN) nano coating using Physical Vapour Deposition (PVD) method. The machining parameters, viz., cutting speed, depth of cut and feed rate which show major impact on Ra are considered during turning. The experiments are designed as per Taguchi orthogonal array and machining process is done accordingly. Then second-order regression equations have been developed on the basis of experimental results for Ra in terms of machining parameters used. Regarding the effect of machining parameters, an upward trend is observed in Ra with respect to feed rate, and as cutting speed increases the Ra value increased slightly due to chatter and vibrations. The adequacy of response variable (Ra) is tested by conducting additional experiments. The predicted Ra values are found to be a close match of their corresponding experimental values of uncoated and coated tools. The corresponding average % errors are found to be within the acceptable limits. Then the surface roughness equations of uncoated and coated tools are set as the objectives of optimization problem and are solved by using Differential Evolution (DE) algorithm. Also the tool lives of uncoated and coated tools are predicted by using Taylor’s tool life equation.

Depth related trends in proximate composition of demersal fishes in the eastern North Pacific

NASA Astrophysics Data System (ADS)

Drazen, J. C.

2007-02-01

The proximate chemistry of the white muscle and liver of 18 species of demersal fish from the eastern North Pacific was studied to determine trends with depth, locomotory mode and buoyancy mechanism, foraging strategy and to elucidate energetic strategies. Data for 24 species from shallow water were taken from the literature and included for analysis of muscle water content. Benthopelagic species, primarily gadiforms, have significantly larger lipid-rich livers than benthic species. The benthopelagic species may use this lipid to add buoyancy, but it is also used as energy storage. Buoyancy mechanism was directly related to proximate composition. Fishes using gasbladders had normal muscle composition. The two species of benthopelagic fishes without gasbladders have either very high muscle lipid content ( Anoplopoma fimbria) or gelatinous muscle ( Alepocephalus tenobrosus) to aid in achieving neutral buoyancy. The macrourid, Albatrossia pectoralis, has a very small gasbladder and also has gelatinous muscle. Both of these benthopelagic fishes with gelatinous muscle feed on pelagic organisms. Gelatinous muscle was also found in two flatfishes that inhabit the oxygen minimum zone. For these fishes, high water content may serve to lower metabolic costs while maintaining large body size. Scavengers such as Coryphaenoides armatus and Coryphaenoides acrolepis have lipid rich livers and others such as A. fimbria and Pachycara sp. have high and variable muscle lipid content. Thus foraging mode also acts to influence proximate composition. Several depth-related trends in proximate composition were found. White muscle water content increased significantly with depth, and all four gelatinous species occurred at bathyal depths. This adds evidence in support of the hypothesis that decreasing light levels shorten reactive distances and relax the selective pressure for high locomotory capacity. In addition significant declines in liver protein content were observed, suggesting that the rates of metabolism in this organ also decline with depth. There was little evidence for food availability affecting proximate composition. There were no significant changes in either muscle or liver lipid or caloric density with depth. Total lipid stores actually increased significantly, but they were driven primarily by the abyssal scavenger C. armatus suggesting that foraging strategy rather than depth may be the most important factor determining total lipid stores.

Efficacy of a feed-additive antibacterial combination for improving feedlot cattle performance and health.

PubMed Central

Gallo, G F; Berg, J L

1995-01-01

The effectiveness of a feed-additive antimicrobial combination for improving feedlot performance and health was tested using 4325 high-risk feeder calves randomly allocated to a control group or an experimental group. The experimental group received the conventional ration plus a feed additive containing 700 mg per head/day of chlortetracycline and sulfamethazine from arrival at the feedlot to day 56 of the feeding period. The inclusion of the feed additive to the ration significantly improved average daily gain for days 0-28 (P = 0.0163) and 0-56 (P = 0.0001), and the feed conversion for days 0-28 (P = 0.0061) and 0-56 (P = 0.0004). Additionally, the use of the feed additive significantly reduced the rate of bovine respiratory disease morbidity for days 0-28 (P = 0.0014) and 0-56 (P = 0.0001), the rate of relapses and mortality for days 0-56 (P = 0.0151 and P = 0.0209, respectively), and the rate of animals diagnosed with chronic respiratory disease for days 0-28 and 0-56 (P = 0.0009 and P = 0.0002, respectively). Performance and health improvements produced by the use of the feed additive were cost-effective. PMID:7600512

The influence of maternal psychosocial circumstances and physical environment on the risk of severe wasting in rural Gambian infants: a mixed methods approach.

PubMed

Nabwera, Helen M; Moore, Sophie E; Mwangome, Martha K; Molyneux, Sassy C; Darboe, Momodou K; Camara-Trawally, Nyima; Sonko, Bakary; Darboe, Alhagie; Singhateh, Seedy; Fulford, Anthony J; Prentice, Andrew M

2018-01-06

Severe wasting affects 16 million under 5's and carries an immediate risk of death. Prevalence remains unacceptably high in sub-Saharan Africa and early infancy is a high-risk period. We aimed to explore risk factors for severe wasting in rural Gambian infants. We undertook a case-control study from November 2014 to June 2015, in rural Gambia. Cases had WHO standard weight-for-length z-scores (WLZ) < -3 on at least 1 occasion in infancy. Controls with a WLZ > -3 in the same interval, matched on age, gender, village size and distance from the clinic were selected. Standard questionnaires were used to assess maternal socioeconomic status, water sanitation and hygiene and maternal mental health. Conditional logistic regression using a multivariable model was used to determine the risk factors for severe wasting. Qualitative in depth interviews were conducted with mothers and fathers who were purposively sampled. A thematic framework was used to analyse the in-depth interviews. Two hundred and eighty (77 cases and 203 controls) children were recruited. In-depth interviews were conducted with 16 mothers, 3 fathers and 4 research staff members. The mean age of introduction of complementary feeds was similar between cases and controls (5.2 [SD 1.2] vs 5.1 [SD 1.3] months). Increased odds of severe wasting were associated with increased frequency of complementary feeds (range 1-8) [adjusted OR 2.06 (95%: 1.17-3.62), p = 0.01]. Maternal adherence to the recommended infant care practices was influenced by her social support networks, most importantly her husband, by infant feeding difficulties and maternal psychosocial stressors that include death of a child or spouse, recurrent ill health of child and lack of autonomy in child spacing. In rural Gambia, inappropriate infant feeding practices were associated with severe wasting in infants. Additionally, adverse psychosocial circumstances and infant feeding difficulties constrain mothers from practising the recommended child care practices. Interventions that promote maternal resilience through gender empowerment, prioritising maternal psychosocial support and encouraging the involvement of fathers in infant and child care promotion strategies, would help prevent severe wasting in these infants.

Feeding goals sought by mothers of 3-5-year-old children.

PubMed

Moore, Sue N; Tapper, Katy; Murphy, Simon

2010-02-01

One means through which children learn eating behaviours is the feeding strategies used by parents. Although research has studied the effects of parental feeding strategies on consumption, choice, and liking, little is known about the goals parents themselves seek. The study aimed to explore the feeding goals sought by parents of preschool children. An exploratory qualitative study using in-depth, semi-structured interviews was undertaken. Data were analysed using thematic and interpretative techniques. A snowballing sample of 12 mothers of children aged 3-5 years was used. Mothers were asked to recall and talk through their feeding experiences with this child. Probe questions were used to explore the reasoning behind the actions described. Data were transcribed and subjected to concurrent coding and interpretation. Mothers spontaneously classified their child as a 'good' or a 'bad' eater. Consumption emerged as the dominant feeding goal. For 'bad' eaters, a short-term goal of consuming any food, rather than no food, was adopted. For 'good' eaters, a long-term goal of consuming a varied, well-balanced diet was favoured. Liking as a feeding goal was not mentioned. Although the literature suggests that liking is the most appropriate feeding goal for the establishment of long-term healthy eating behaviours, parents do not knowingly, repeatedly and consistently target food likes as a direct outcome of their feeding strategies. Interventions that focus on 'how' parents feed their children, as well as 'what', are recommended.

7 CFR 760.1203 - Payment calculation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... beginning on January 2, 2005 and ending February 27, 2007. The producer must pick the year of the benefits..., (ii) Catfish feed payment rate for 2005, 2006, or 2007, as applicable, as set by FSA. (c) The catfish feed rate represents 61 percent of the normal cost of a ton of feed for a year divided by six to...

Effects of two different feeding positions on physiological characteristics and feeding performance of preterm infants: A randomized controlled trial.

PubMed

Girgin, Burcu Aykanat; Gözen, Duygu; Karatekin, Güner

2018-04-01

The aim of this randomized controlled study was to determine the effect of semielevated side-lying (ESL) and semielevated supine (ESU) positions, which are used to bottle-feed preterm infants, on their physiological characteristics and feeding performance. The sample consisted of preterm infants who were born in the 31st gestational week and below, and met the inclusion criteria. A randomization was provided in the sample group with a total of 80 infants including 38 infants in the ESL (experimental) group and 42 infants in the ESU (control) group. Both groups were compared in terms of their SpO2 values, heart rates, and feeding performances before, during, and after the feeding. The data were obtained by using a form for infant descriptive characteristics, feeding follow-up form, a Masimo Radical-7 pulse oximeter device, and a video camera. It was determined that the infants in the ESL group had statistically significantly higher SpO2 values (ESL: 96.77 ± 2.51; ESU: 93.48 ± 5.63) and lower heart rates (ESL: 155.87 ± 11.18; ESU: 164.35 ± 6.00) during the feeding compared to the infants in the ESU group (p < .05). Besides, oxygen saturation levels of the infants in the ESU group decreased more (p < .01) and their heart rates increased more (p < .05) during the feeding than those obtained before the feeding compared to the infants in the ESL group. The ESL position has a more positive effect on oxygen saturation and heart rate of infants and it is more effective in providing a physiological stabilization during the feeding, compared to the ESU position. According to these results, the ESL position can be recommended for preterm feeding. © 2018 Wiley Periodicals, Inc.

Chronic ethanol feeding modulates the synthesis of digestive enzymes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ponnappa, B.C.; Hoek, J.B.; Rubin, E.

1987-05-01

The effects of chronic ethanol feeding on pancreatic protein synthesis were investigated. Protein synthesis was assessed by studying the rate of incorporation of /sup 3/H-leucine into TCA-precipitable proteins in isolated pancreatic acini from rats. Chronic ethanol ingestion increased the rate of pancreatic protein synthesis by 2-4 fold. The onset of the increase in protein synthesis was detectable two days after ethanol feeding, reached a maximum after 7 days and remained unchanged after 4 months on the ethanol-containing diet. The rate of synthesis of individual digestive enzymes was studied by SDS-PAGE on extracts obtained from purified zymogen granules. Ethanol feeding inducedmore » an increase in the rate of synthesis of most of the digestive enzymes; chymotrypsinogen, trypsinogen and an unidentified protein were increased to a greater extent than other digestive enzymes. By contrast, the synthesis of amylase was selectively decreased after ethanol feeding. These results suggest that chronic ethanol ingestion has specific effects on the rate of synthesis of individual digestive enzymes in the exocrine pancreas.« less

21 CFR 558.455 - Oxytetracycline and neomycin.

Code of Federal Regulations, 2013 CFR

2013-04-01

... use—(1) Chickens. It is used in feed as follows: Oxytetracycline and neomycin sulfate amount in grams per ton of feed Indications for use Limitations Sponsors (i) 10 to 50 Chickens: For increased rate of weight gain and improved feed efficiency. Feed continuously; do not feed to chickens producing eggs for...

21 CFR 558.455 - Oxytetracycline and neomycin.

Code of Federal Regulations, 2014 CFR

2014-04-01

... use—(1) Chickens. It is used in feed as follows: Oxytetracycline and neomycin sulfate amount in grams per ton of feed Indications for use Limitations Sponsors (i) 10 to 50 Chickens: For increased rate of weight gain and improved feed efficiency. Feed continuously; do not feed to chickens producing eggs for...

21 CFR 558.455 - Oxytetracycline and neomycin.

Code of Federal Regulations, 2012 CFR

2012-04-01

... use—(1) Chickens. It is used in feed as follows: Oxytetracycline and neomycin sulfate amount in grams per ton of feed Indications for use Limitations Sponsors (i) 10 to 50 Chickens: For increased rate of weight gain and improved feed efficiency. Feed continuously; do not feed to chickens producing eggs for...

Description and typology of intensive Chios dairy sheep farms in Greece.

PubMed

Gelasakis, A I; Valergakis, G E; Arsenos, G; Banos, G

2012-06-01

The aim was to assess the intensified dairy sheep farming systems of the Chios breed in Greece, establishing a typology that may properly describe and characterize them. The study included the total of the 66 farms of the Chios sheep breeders' cooperative Macedonia. Data were collected using a structured direct questionnaire for in-depth interviews, including questions properly selected to obtain a general description of farm characteristics and overall management practices. A multivariate statistical analysis was used on the data to obtain the most appropriate typology. Initially, principal component analysis was used to produce uncorrelated variables (principal components), which would be used for the consecutive cluster analysis. The number of clusters was decided using hierarchical cluster analysis, whereas, the farms were allocated in 4 clusters using k-means cluster analysis. The identified clusters were described and afterward compared using one-way ANOVA or a chi-squared test. The main differences were evident on land availability and use, facility and equipment availability and type, expansion rates, and application of preventive flock health programs. In general, cluster 1 included newly established, intensive, well-equipped, specialized farms and cluster 2 included well-established farms with balanced sheep and feed/crop production. In cluster 3 were assigned small flock farms focusing more on arable crops than on sheep farming with a tendency to evolve toward cluster 2, whereas cluster 4 included farms representing a rather conservative form of Chios sheep breeding with low/intermediate inputs and choosing not to focus on feed/crop production. In the studied set of farms, 4 different farmer attitudes were evident: 1) farming disrupts sheep breeding; feed should be purchased and economies of scale will decrease costs (mainly cluster 1), 2) only exercise/pasture land is necessary; at least part of the feed (pasture) must be home-grown to decrease costs (clusters 1 and 4), 3) providing pasture to sheep is essential; on-farm feed production decreases costs (mainly cluster 3), and 4) large-scale farming (feed production and cash crops) does not disrupt sheep breeding; all feed must be produced on-farm to decrease costs (mainly cluster 3). Conducting a profitability analysis among different clusters, exploring and discovering the most beneficial levels of intensified management and capital investment should now be considered. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Response of marine benthic fauna to thin-layer capping with activated carbon in a large-scale field experiment in the Grenland fjords, Norway.

PubMed

Samuelsson, Göran S; Raymond, Caroline; Agrenius, Stefan; Schaanning, Morten; Cornelissen, Gerard; Gunnarsson, Jonas S

2017-06-01

A field experiment with thin-layer capping was conducted in the Grenland fjords, Norway, for remediation in situ of mercury and dioxin-contaminated sediments. Experimental fields at 30 and 95 m depth were capped with (i) powdered activated carbon (AC) mixed with clay (AC+cla`y), (ii) clay, and (iii) crushed limestone. Ecological effects on the benthic community and species-feeding guilds were studied 1 and 14 months after capping, and a total of 158 species were included in the analyses. The results show that clay and limestone had only minor effects on the benthic community, while AC+clay caused severe perturbations. AC+clay reduced the abundance, biomass, and number of species by up to 90% at both 30 and 95 m depth, and few indications of recovery were found during the period of this investigation. The negative effects of AC+clay were observed on a wide range of species with different feeding strategies, although the suspension feeding brittle star Amphiura filiformis was particularly affected. Even though activated carbon is effective in reducing sediment-to-water fluxes of dioxins and other organic pollutants, this study shows that capping with powdered AC can lead to substantial disturbances to the benthic community.

Biosecurity Conditions in Small Commercial Chicken Farms, Bangladesh 2011–2012

PubMed Central

Rimi, N. A.; Sultana, R.; Muhsina, M.; Uddin, B.; Haider, N.; Nahar, N.; Zeidner, N.; Sturm-Ramirez, K.; Luby, S. P.

2018-01-01

In Bangladesh, highly pathogenic avian influenza H5N1 is endemic in poultry. This study aimed to understand the biosecurity conditions and farmers’ perception of avian influenza biosecurity in Bangladeshi small commercial chicken farms. During 2011–2012, we conducted observations, in-depth interviews and group discussions with poultry farmers in 16 farms and in-depth interviews with seven local feed vendors from two districts. None of the farms were completely segregated from people, backyard poultry, other animals, households, other poultry farms or large trees. Wild birds and rodents accessed the farms for poultry feed. Farmers usually did not allow the buyers to bring egg trays inside their sheds. Spraying disinfectant in the shed and removing feces were the only regular cleaning and disinfection activities observed. All farmers sold or used untreated feces as fish feed or fertilizer. Farmers were more concerned about Newcastle disease and infectious bursal disease than about avian influenza. Farmers’ understanding about biosecurity and avian influenza was influenced by local vendors. While we seldom observed flock segregation, some farmers used measures that involved additional cost or effort to protect their flocks. These farmers could be motivated by interventions to protect their investment from diseases they consider harmful. Future interventions could explore the feasibility and effectiveness of low-cost alternative biosecurity measures. PMID:28289988

Biosecurity Conditions in Small Commercial Chicken Farms, Bangladesh 2011-2012.

PubMed

Rimi, N A; Sultana, R; Muhsina, M; Uddin, B; Haider, N; Nahar, N; Zeidner, N; Sturm-Ramirez, K; Luby, S P

2017-06-01

In Bangladesh, highly pathogenic avian influenza H5N1 is endemic in poultry. This study aimed to understand the biosecurity conditions and farmers' perception of avian influenza biosecurity in Bangladeshi small commercial chicken farms. During 2011-2012, we conducted observations, in-depth interviews and group discussions with poultry farmers in 16 farms and in-depth interviews with seven local feed vendors from two districts. None of the farms were completely segregated from people, backyard poultry, other animals, households, other poultry farms or large trees. Wild birds and rodents accessed the farms for poultry feed. Farmers usually did not allow the buyers to bring egg trays inside their sheds. Spraying disinfectant in the shed and removing feces were the only regular cleaning and disinfection activities observed. All farmers sold or used untreated feces as fish feed or fertilizer. Farmers were more concerned about Newcastle disease and infectious bursal disease than about avian influenza. Farmers' understanding about biosecurity and avian influenza was influenced by local vendors. While we seldom observed flock segregation, some farmers used measures that involved additional cost or effort to protect their flocks. These farmers could be motivated by interventions to protect their investment from diseases they consider harmful. Future interventions could explore the feasibility and effectiveness of low-cost alternative biosecurity measures.

Changes in caesarean section rates and milk feeding patterns of infants between 1986 and 2013 in the Dominican Republic.

PubMed

McLennan, John D

2016-10-01

The relationship between caesarean sections (C-sections) and infant feeding varies between different samples and indicators of feeding. The current study aimed to determine the relationship between C-sections and five indicators of infant milk feeding (breast-feeding within 1 h after delivery, at the time of the survey (current) and ever; milk-based prelacteal feeds; and current non-breast milk use) over time in a country with a rapidly rising C-section rate. Secondary data analysis on cross-sectional data from Demographic and Health Surveys from six different time points between 1986 and 2013. Dominican Republic. Infants under 6 months of age. Over 90 % of infants were ever breast-fed in each survey sample. However, non-breast milk use has expanded over time with a concomitant drop in predominant breast-feeding. C-section prevalence has increased over time reaching 63 % of sampled infants in the most recent survey. C-sections remained significantly related to three infant feeding practices - the child not put to the breast within 1 h after delivery, milk-based prelacteal feeds and current non-breast milk use - in multivariate models that included sociodemographic control variables. However, current non-breast milk use was no longer related to C-sections when milk-based prelacteal feeds were factored into the model. Reducing or avoiding milk-based prelacteal feeds, particularly among those having C-sections, may improve subsequent breast-feeding patterns. Simultaneously, efforts are needed to understand and help reduce the exceptionally high C-section rate in the Dominican Republic.

Automatic recognition of lactating sow behaviors through depth image processing

USDA-ARS?s Scientific Manuscript database

Manual observation and classification of animal behaviors is laborious, time-consuming, and of limited ability to process large amount of data. A computer vision-based system was developed that automatically recognizes sow behaviors (lying, sitting, standing, kneeling, feeding, drinking, and shiftin...

Heart Rate Variability as a Feeding Intervention Outcome Measure in the Preterm Infant.

PubMed

Pados, Britt F; Thoyre, Suzanne M; Knafl, George J; Nix, William Brant

2017-10-01

Feeding interventions for preterm infants aim to reduce the physiologic stress of feeding to promote growth. Heart rate variability (HRV) is a potential noninvasive measure of physiologic stress that may be useful for evaluating efficacy of feeding interventions. To evaluate whether HRV is a sensitive measure of physiologic stress compared with standard physiologic outcomes in the context of a feeding intervention study. This was a secondary analysis of a within-subjects, cross-over design study comparing usual care feeding with a gentle, coregulated (CoReg) feeding approach in 14 infants born less than 35 weeks' postmenstrual age. HRV indices were calculated from electrocardiogram data and compared with standard physiologic outcomes, including oxygen saturation (Spo2), respiratory rate (RR), apnea, heart rate (HR), and bradycardia. Data were analyzed using linear mixed modeling. Infants fed using the CoReg approach had fewer apneic events and higher RR, suggesting they were able to breathe more during feeding. No statistically significant differences were found in SpO2, HR, bradycardia, or high frequency power (the most commonly reported measure of HRV). Infants fed using the usual care approach had significantly higher SD12, a measure of HRV indicating randomness in the HR, which is a potential indicator of elevated stress. SD12 was more sensitive to stress than SpO2, HR, and bradycardia. The utility of HRV as a measure of feeding outcomes in clinical practice needs further exploration. Further exploration of HRV as an intervention outcome measure is needed, particularly evaluating nonlinear indices, such as SD12.

Growth and feeding patterns of European anchovy ( Engraulis encrasicolus) early life stages in the Aegean Sea (NE Mediterranean)

NASA Astrophysics Data System (ADS)

Catalán, Ignacio A.; Folkvord, Arild; Palomera, Isabel; Quílez-Badía, Gemma; Kallianoti, Fotini; Tselepides, Anastasios; Kallianotis, Argyris

2010-01-01

The objective of this work was to describe inter- and intra-annual variations in the environmental characteristics of the North-eastern Aegean Sea and to relate these changes to the egg and larval distributions, growth and feeding of larval anchovy ( Engraulis encrasicolus). Four cruises, two in July and two in September in 2003 and 2004 were performed. The distributions of eggs and larvae were associated with i) salinity fronts related to the Black Sea Water and ii) shallow areas of high productivity over the continental shelf, some of them with high riverine influence. The first published description of the anchovy larval diet in the Eastern Mediterranean was conducted in individuals ranging from 2.2 to 17 mm standard length. The number of non-empty guts was relatively high (between 20% and 30%), and the diet was described through 15 main items. The mean size of the prey increased with larval size, and was generally dominated by prey widths smaller than 80 μm (mainly the nauplii and copepodite stages of copepods). Small larvae positively selected copepod nauplii. As larvae grew, they shifted to larger copepod stages. At all sizes, larvae rejected abundant taxa like cladocerans. The average trophic level calculated for anchovy of all size ranges was 2.98 ± 0.16 (SE). Growth rates varied from 0.41 to 0.75 mm d -1, with the highest growth rates generally observed in September. Variability in the Black Sea Water influence and the recorded inter- and intra-annual changes in primary and secondary production, combined with marked changes in temperature over the first 20 m depth, are used to frame the discussion regarding the observed significant differences in growth rates in terms of both length and weight.

Breastfeeding at 6 weeks and predictive factors.

PubMed

Chye, J K; Zain, Z; Lim, W L; Lim, C T

1997-10-01

Despite the numerous changes made in accordance with the Baby Friendly Hospital Initiative at the University Hospital, Kuala Lumpur, the low rates of breastfeeding have persisted. This study aims to examine the current trend in infant feeding, and the influences of some perinatal and sociodemographic factors on breastfeeding. Five-hundred mothers with singleton pregnancies and healthy infants were interviewed at 6 weeks post-partum. Only 124 (25 per cent) mothers were practising exclusive breastfeeding (EBF), and 132 (26 per cent) mothers were using exclusive infant formula feeding (EIF). On logistic regression analyses, mothers who followed EBF were more likely to have had antenatal plans to breastfeed (Odds ratio 2.44, 95 per cent confidence interval 1.75-3.45), not in paid employment post-natally (OR 1.76, 95 per cent CI 1.31-2.36), of older age group (> 27 years) (OR 1.48, 95 per cent CI 1.13-1.93), had female infants (OR 1.38, 95 per cent CI 1.05-1.80) and of Indian ethnicity (compared to Chinese) (OR 3.87, 95 per cent CI 2.16-6.89). Breastfeeding difficulties were associated with decreased odds of EBF (OR 0.21, 95 per cent CI 0.13-0.34). Parental education, fathers' ages and incomes, primigravida status, Caesarean section, present of episiotomy, late first breastfeed, phototherapy, and length of hospital stay were not significant predictors of failure of EBF. In comparison, predictive factors for increased use of EIF were mothers who have had breastfeeding difficulties, < or = 9 years of schooling, and of Chinese descent. In conclusions, the overall rate of EBF by 6 weeks of age in infants born in this urban hospital had remained poor. The adverse factors for EBF identified in this study warrant further in-depth studies to determine effective ways of improving EBF rates.

Feeding rates and under-ice foraging strategies of the smallest lunge filter feeder, the Antarctic minke whale (Balaenoptera bonaerensis).

PubMed

Friedlaender, A S; Goldbogen, J A; Nowacek, D P; Read, A J; Johnston, D; Gales, N

2014-08-15

Body size and feeding mode are two fundamental characteristics that determine foraging performance and ecological niche. As the smallest obligate lunge filter feeders, minke whales represent an ideal system for studying the physical and energetic limits of filter feeding in endotherms. We used multi-sensor suction cup tags to quantify the feeding performance of Antarctic minke whales. Foraging dives around and beneath sea ice contained up to 24 lunges per dive, the highest feeding rates for any lunge-feeding whale. Their small size allows minke whales access to krill in sea-ice environments not easily accessible to larger baleen whales. Furthermore, their ability to filter feed provides an advantage over other smaller sympatric krill predators such as penguins and seals that feed on individual prey. The unique combination of body size, feeding mechanism and sea-ice habitat of Antarctic minke whales defines a previously undocumented energetic niche that is unique among aquatic vertebrates. © 2014. Published by The Company of Biologists Ltd.

Food consumption and growth rates of juvenile black carp fed natural and prepared feeds

USGS Publications Warehouse

Hodgins, Nathaniel C.; Schramm, Harold L.; Gerard, Patrick D.

2014-01-01

The introduced mollusciphagic black carp Mylopharyngodon piceus poses a significant threat to native mollusks in temperate waters throughout the northern hemisphere, but consumption rates necessary to estimate the magnitude of impact on mollusks have not been established. We measured food consumption and growth rates for small (77–245 g) and large (466–1,071 g) triploid black carp held individually under laboratory conditions at 20, 25, and 30°C. Daily consumption rates (g food · g wet weight fish−1·d−1·100) of black carp that received prepared feed increased with temperature (small black carp 1.39–1.71; large black carp 1.28–2.10), but temperature-related increases in specific growth rate (100[ln(final weight) - ln(initial weight)]/number of days) only occurred for the large black carp (small black carp −0.02 to 0.19; large black carp 0.16–0.65). Neither daily consumption rates (5.90–6.28) nor specific growth rates (0.05–0.24) differed among temperatures for small black carp fed live snails. The results of these laboratory feeding trials indicate food consumption rates can vary from 289.9 to 349.5 J·g−1·d−1 for 150 g black carp receiving prepared feed, from 268.8 to 441.0 J·g−1·d−1for 800 g black carp receiving prepared feed, and from 84.8 to 90.2 J·g−1·d−1 for 150 g black carp that feed on snails. Applying estimated daily consumption rates to estimated biomass of native mollusks indicates that a relatively low biomass of bla

'The midwives aren't allowed to tell you': perceived infant feeding policy restrictions in a formula feeding culture - the Feeding Your Baby Study.

PubMed

Lagan, Briege M; Symon, Andrew; Dalzell, Janet; Whitford, Heather

2014-03-01

to explore the expectations and experiences of postnatal mothers in relation to infant feeding, and to identify how care could be improved. this study used a qualitative, exploratory, descriptive design. Data were collected through one to one in-depth semi-structured interviews and focus groups. Tayside area of Eastern Scotland. seven focus group interviews (n=38 participants) and 40 semi-structured one-to-one interviews with mothers with a range of infant feeding experiences i.e. exclusively breast fed; started breast feeding but changed to formula milk before 16 weeks; exclusively formula fed; or who concurrently breast and formula fed their infant. a principal theme of 'Mixed and missing messages' emerged, incorporating 'Conflicting advice', 'Information gaps' and 'Pressure to breast feed' with a secondary theme of 'Emotional costs'. Several problems were identified with how women were given information, how infant feeding discussions were held, and the type of support available after the infant is born. there was a strong perception that some midwives are not 'allowed' to discuss or provide information on formula feeding, and the women reported feeling pressurised to breast feed. Current interpretation of guidance from the UNICEF UK Baby Friendly Initiative may be restricting antenatal discussions about infant feeding. The combination of this partial preparation antenatally and postnatal support that was often inconsistent seems to incur a counter-productive emotional cost. at strategic, policy and practice levels the infant feeding message needs to change to encourage a more woman-centred focus including discussions about the realities of all types of infant feeding. It is important that health providers continue to promote and support breast feeding; and that effective services are provided to women who wish to breast feed to help them to do so. However provision of information about all aspects of feeding is needed as well as support for women who do not wish to breast feed. © 2013 Published by Elsevier Ltd.

Contaminated and uncontaminated feeding influence perceived intimacy in mixed-sex dyads.

PubMed

Alley, Thomas R

2012-06-01

It was expected that viewers watching adult mixed-sex pairs dining together will give higher ratings of the perceived intimacy and involvement of the pair if feeding is displayed while eating, especially if the feeding involves contaminated (i.e., with potential germ transfer) foods. Our hypotheses were tested using a design in which participants viewed five videotapes in varying order. Each video showed different mixed-sex pairs of actors sharing meal and included a distinct form of food sharing or none. These were shown to 50 small groups of young adults in quasi-random sequences to control for order effects. Immediately after each video, viewers were asked about the attractiveness, attraction and intimacy in the dyad they had just observed. As predicted, videos featuring contaminated feeding consistently produced higher ratings on involvement and attraction than those showing uncontaminated feeding which, in turn, mostly produced higher ratings on involvement and attraction than those showing no feeding behaviors. Copyright © 2012 Elsevier Ltd. All rights reserved.

Method for controlling gas metal arc welding

DOEpatents

Smartt, Herschel B.; Einerson, Carolyn J.; Watkins, Arthur D.

1989-01-01

The heat input and mass input in a Gas Metal Arc welding process are controlled by a method that comprises calculating appropriate values for weld speed, filler wire feed rate and an expected value for the welding current by algorithmic function means, applying such values for weld speed and filler wire feed rate to the welding process, measuring the welding current, comparing the measured current to the calculated current, using said comparison to calculate corrections for the weld speed and filler wire feed rate, and applying corrections.

Assessing estuarine quality: A cost-effective in situ assay with amphipods.

PubMed

Martinez-Haro, Monica; Acevedo, Pelayo; Pais-Costa, Antónia Juliana; Taggart, Mark A; Martins, Irene; Ribeiro, Rui; Marques, João Carlos

2016-05-01

In situ assays based on feeding depression can be powerful ecotoxicological tools that can link physiological organism-level responses to population and/or community-level effects. Amphipods are traditional target species for toxicity tests due to their high sensitivity to contaminants, availability in the field and ease of handling. However, cost-effective in situ assays based on feeding depression are not yet available for amphipods that inhabit estuarine ecosystems. The aim of this work was to assess a short-term in situ assay based on postexposure feeding rates on easily quantifiable food items with an estuarine amphipod. Experiments were carried out under laboratory conditions using juvenile Echinogammarus marinus as the target individual. When 60 Artemia franciscana nauplii (as prey) were provided per individual for a period of 30 min in dark conditions, feeding rates could be easily quantified. As an endpoint, postexposure feeding inhibition in E. marinus was more sensitive to cadmium contamination than mortality. Assay calibration under field conditions demonstrated the relevance of sediment particle size in explaining individual feeding rates in uncontaminated water bodies. An evaluation of the 48-h in situ bioassay based on postexposure feeding rates indicated that it is able to discriminate between unpolluted and polluted estuarine sites. Using the harmonized protocol described here, the in situ postexposure feeding assay with E. marinus was found to be a potentially useful, cost-effective tool for assessing estuarine sediment and water quality. Copyright © 2016 Elsevier Ltd. All rights reserved.

40 CFR 63.606 - Performance tests and compliance provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The P2O5 content (Rp) of the feed..., No. 1 Preparation of Sample. (B) Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus...

40 CFR 63.606 - Performance tests and compliance provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The P2O5 content (Rp) of the feed..., No. 1 Preparation of Sample. (B) Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus...

Research on operation mode of abrasive grain during grinding

NASA Astrophysics Data System (ADS)

Ivanova, T. N.; Dement’ev, V. B.; Nikitina, O. V.

2018-03-01

The processing of materials by cutting with an abrasive tool is carried out by means of thousands of grains bonded together as a single whole. The quality of the abrasive tool is defined by cutting properties of abrasive grains and depends on features of spreading the temperature field in time and in the abrasive grain volume. Grains are exposed to heating and cooling during work. It leads to undesired effects such as a decrease of durability of grain retention in the binder, hardness, intensification of diffusion and oxidation processes between the binder and the grain, the occurrence of considerable temperature stresses in the grain itself. The obtained equation which allows calculation of temperature field of grain for one rotation of grinding wheel shows that the temperature of the wheel depends on grinding modes and thermophysical properties of abrasive material. Thus, as the time of contact of grain with processed material increases, the temperature in the cutting area rises. As thermophysical properties increase, the temperature in cutting area decreases. Thermal working conditions are determined to be different from each other depending on contact time of the grain and the material. For example, in case of creep-feed grinding, the peak value of temperature is higher than during multistep grinding; the depth of expansion is greater. While the speed of the thermal process in creep-feed grinding is 2-3 times lower than in multistep grinding, the gradient reduces 3-4 times. The analysis of machining methods shows that creep-feed grinding ensures greater depth of grain heating, a smaller heating rate and a reduced velocity gradient. It causes a decrease of probable allotropic modifications and prevents from occurring of heat strokes - cracking of grains due to high temperature falls. Consequently, it is necessary to employ creep-feed grinding to increase the efficiency of abrasive tool employing. Three operation modes of grinding wheel including blunting, full self-sharpening, emergency wear and tear are determined as the result of the research on evaluation of cutting ability of grinding wheels. Recommendations for working capacity of grinding wheels in each operation mode and with a transition from one mode to another are given. As a result of the research, different dependencies were determined. They include dependencies, governing the extent of influence of granularity, difference in height and concentration of grains, geometry parameters of the detail to be machined and the grinding wheel on machining modes and the thickness of the layer cutoff by one grain. They have an influence on the grinding process.

[Study on correlation of oxygen consumption rate and suffocation point of Whitmania pigra and Bellamya purificata and optimum way of feeding Whitmania pigra].

PubMed

Li, Meng-Meng; Shi, Hong-Zhuan; Guo, Qiao-Sheng; Wang, Jia; Dai, Dao-Xin

2016-08-01

The oxygen consumption, oxygen consumption rate and suffocation point of different quality Whitmania pigra and Bellamya purificata were determined by hydrostatic breathing room method. The effects of feeding modes on growth of W.pigra were determined by biomass. The results showed that the oxygen consumption correlated positively with the weight of W.pigra and B. purificata（P<0.05）, suffocation point increased with the increases of the weight（P<0.05）.Oxygen consumption correlated negatively with the weight of W. pigra, the oxygen consumption rate of B.purificata first increased and then decreased with the increasing of the weight. Feeding modes had no significant effects on the finial weight, SGR, WGR, death rates of W. pigra. Feeding modes had significant effects on eating ratio. It suggested that the optimum feeding frequency of W. pigra was once every three days. Scientific and reasonable feeding amount of B. purificata should be calculated based on oxygen consumption and suffocation point of W.pigra and B.purificata at every period. Meanwhile, stocking density, water area and water exchanging frequency should be taken into consideration. Copyright© by the Chinese Pharmaceutical Association.

The effects of feeding time on milk production, total-tract digestibility, and daily rhythms of feeding behavior and plasma metabolites and hormones in dairy cows.

PubMed

Niu, M; Ying, Y; Bartell, P A; Harvatine, K J

2014-12-01

The timing of feed intake entrains circadian rhythms regulated by internal clocks in many mammals. The objective of this study was to determine if the timing of feeding entrains daily rhythms in dairy cows. Nine Holstein cows were used in a replicated 3 × 3 Latin square design with 14-d periods. An automated system recorded the timing of feed intake over the last 7 d of each period. Treatments were feeding 1×/d at 0830 h (AM) or 2030 h (PM) and feeding 2×/d in equal amounts at 0830 and 2030 h. All treatments were fed at 110% of daily intake. Cows were milked 2×/d at 0500 and 1700 h. Milk yield and composition were not changed by treatment. Daily intake did not differ, but twice-daily feeding tended to decrease total-tract digestibility of organic matter and neutral detergent fiber (NDF). A treatment by time of day interaction was observed for feeding behavior. The amount of feed consumed in the first 2h after feeding was 70% greater for PM compared with AM feeding. A low rate of intake overnight (2400 to 0500 h; 2.2 ± 0.74% daily intake/h, mean ± SD) and a moderate rate of intake in the afternoon (1200 to 1700 h; 4.8 ± 1.1% daily intake/h) was noted for all treatments, although PM slightly reduced the rate during the afternoon period compared with AM. A treatment by time of day interaction was seen for fecal NDF and indigestible NDF (iNDF) concentration, blood urea nitrogen, plasma glucose and insulin concentrations, body temperature, and lying behavior. Specifically, insulin increased and glucose decreased more after evening feeding than after morning feeding. A cosine function within a 24-h period was used to characterize daily rhythms using a random regression. Rate of feed intake during spontaneous feeding, fecal NDF and iNDF concentration, plasma glucose, insulin, NEFA, body temperature, and lying behavior fit a cosine function within a 24-h period that was modified by treatment. In conclusion, feeding time can reset the daily rhythms of feeding and lying behavior, core body temperature, fecal NDF and iNDF concentration, and plasma blood urea nitrogen, glucose, and insulin concentration of dairy cows, but has no effect on daily DMI and milk production. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

[Role of donor human milk feeding in preventing nosocomial infection in very low birth weight infants].

PubMed

Bi, Hong-Juan; Xu, Jing; Wei, Qiu-Fen

2018-02-01

To investigate the role of donor human milk in the prevention of nosocomial infection in very low birth weight infants. MeETHODS: A total of 105 hospitalized preterm infants with a very low birth weight were enrolled. They were classified into mother's own milk feeding group, donor human milk feeding group, and preterm formula feeding group, with 35 infants in each group. The three groups were compared in terms of incidence rates of nosocomial infection, necrotizing enterocolitis, and feeding intolerance, time to full enteral feeding, and early growth indices. Compared with the preterm formula feeding group, the donor human milk feeding group and the mother's own milk feeding group had significantly lower incidence rates of nosocomial infection and necrotizing enterocolitis and shorter time to full enteral feeding (P<0.05). There were no significant differences in head circumference, body length, and weight growth velocity among the three groups. Donor human milk can be used in case of a lack of mother's own milk and may help to reduce nosocomial infection.

Star-shaped feeding traces produced by echiuran worms on the deep-sea floor of the Bay of Bengal

NASA Astrophysics Data System (ADS)

Ohta, Suguru

1984-12-01

Many star-shaped foraging traces were observed in bottom photographs of the deep-sea floor taken in the Bay of Bengal between the depths of 5025 and 2635 m. They were classified into 10 types according to their dimensions, aspect ratios (length/width) of their spokes, features of the central structure, and possible production mechanisms. The proboscis of a deep-sea bonellid echiuran worm was photographed at a depth of 2635 m in the act of producing one of the star-shaped foraging traces. On the basis of photographic observations and observations of shallow-water forms, several types of the feeding traces can be ascribed to the foraging of deep-sea echiuran worms on surface detritus. At least four types of the star-shaped trace are probably produced by deep-sea bonellid worms, and a linear correlation could be found between the aspect ratios of the spokes and maximum number of spokes around the central hole. A geometrical model experiment stimulating the feeding behavior of a bonellid worm suggested simple behavioral principles which afford maximum utilization of the surface area around a central hole with least expenditure of energy. The prediction of the maximum number of spokes for a given aspect of spokes by the model experiment agreed well with those observed, both utilizing about 76% of the fresh sediment surface within the span of the probiscis around a central hole. This efficient feeding pattern may have adaptive value in deep-sea environments such as the central part of the Bay of Bengal, where energy input is limited.

Distribution of epibenthic megafauna and lebensspuren on two central North Pacific seamounts

NASA Astrophysics Data System (ADS)

Kaufmann, Ronald S.; Wakefield, W. Waldo; Genin, Amatzia

1989-12-01

The abundance, composition and spatial distribution of megafaunal communities and lebensspuren assemblages at three sites on two deep seamounts in the central North Pacific were surveyed photographically using still cameras mounted on the research submersible Alvin. Photographic transects were made on the summit cap (˜1500 m depth) and summit perimeter (˜ 1800 m depth) of Horizon Guyot and on the summit cap (˜3100 m depth) of Magellan Rise. The summit caps of both seamounts were covered with foraminiferal sand, while the summit perimeter of Horizon Guyot was characterized by numerous rock outcroppings (basalt and chert encrusted with ferromanganese oxides) on which was situated a speciose assemblage of suspension-feeding organisms. The most abundant megafauna at all three sites were large, sediment-agglutinating protists belonging to the class Xenophyophorea. Among the three sites, the Horizon Guyot summit cap supported the highest densities of fishes and lebensspuren and the fewest echinoderms, while the Magellan Rise summit cap was populated by a diverse community of deposit-feeding echinoderms. Megafaunal abundances on Horizon Guyot were lower than those at equivalent depths on the western North Atlantic continental slope, while those on Magellan Rise were higher. The faunal differences observed between the two seamounts were attributed primarily to differences in hydrodynamic conditions, substrate availability and nutrient availability. Most of the lebensspuren on these seamounts appeared to be patchily distributed on spatial scales of 10-1000 m, while xenophyophore distributions were predominantly random on the same spatial scales. Biogeographically the species identified exhibited predominantly widespread to cosmopolitan distributions with Indo-West Pacific faunal affinities, typical of other seamounts in the same depth range and biogeographic province.

Nasoenteral feeding tube placement by nurses using an electromagnetic guidance system (with video).

PubMed

Mathus-Vliegen, Elisabeth M H; Duflou, Ann; Spanier, Marcel B W; Fockens, Paul

2010-04-01

The early institution of feeding in patients who need postpyloric feeding tubes is often hampered by a limited availability of endoscopists experienced in safe tube positioning. To test the feasibility of having nurses place postpyloric feeding tubes by using a universal path finding system device. Prospective study. Academic hospital. The success rate and learning curve of a senior nurse placing postpyloric feeding tubes in 50 patients was studied, followed by a study in 160 patients on the success rates and learning curves of 4 inexperienced nurses instructed by the senior nurse. Finally, the success rate of postpyloric feeding tube placement by the senior nurse in 50 critically ill patients was investigated. Postpyloric feeding tube positioning by nurses using an electromagnetic universal path-finding system device enabling them to follow the path of the tip of the feeding tube on a monitor screen. Success was defined by postpyloric positioning of the feeding tube. The ultimate aim was to reach at least the duodenojejunal flexure. In the first part, the senior nurse was successful in 72% of cases. There was a clear learning curve. In the second part, the 4 newly instructed nurses had a success rate of 89.4% without an evident learning curve. In the third part, successful feeding tube positioning was achieved in 78% of critically ill patients. Of the 217 successfully positioned tubes, 74% reached at least the duodenojejunal flexure. In half of the unsuccessful cases, an explanation for the failure was found at endoscopy. No complications were seen. The generalization to less-specialized hospitals should be investigated. Postpyloric positioning of feeding tubes by nurses at the bedside without endoscopy is feasible and safe. Nurses may take over some of the tasks of doctors in a time of high endoscopic needs. Copyright 2010 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

Infant survival, HIV infection, and feeding alternatives in less-developed countries.

PubMed Central

Kuhn, L; Stein, Z

1997-01-01

OBJECTIVES: This study examines, in the context of the human immunodeficiency virus (HIV) epidemic, the effects of optimal breast-feeding, complete avoidance of breast-feeding, and early cessation of breast-feeding. METHODS: The three categories of breast-feeding were weighed in terms of HIV transmission and infant mortality. Estimates of the frequency of adverse outcomes were obtained by simulation. RESULTS: Avoidance of all breast-feeding by the whole population always produces the worst outcome. The lowest frequency of adverse outcomes occurs if no HIV-seropositive women breast-feed and all seronegative women breast-feed optimally, given infant mortality rates below 100 per 1000 and relative risks of dying set at 2.5 for non-breast-fed compared with optimally breast-fed infants. For known HIV-seropositive mothers, fewer adverse outcomes result from early cessation than from prolonged breast-feeding if the hazard of HIV transmission through breast-feeding after 3 months is 7% or more, even at high mortality rates, given relative risks of dying set at 1.5 for early cessation compared with optimal duration of breast-feeding. CONCLUSIONS: The risk of HIV transmission through breast-feeding at various ages needs to be more precisely quantified. The grave issues that may accompany a possible decline in breast-feeding in the less developed world demand evaluation. PMID:9224171

Stationary Engineering Science Manual--3.

ERIC Educational Resources Information Center

Steingress, Frederick M.; And Others

This manual provides in-depth coverage of topics related to boiler operations. The assignments contain an objective, descriptive information, reference sources, procedures, and assignments. Sixteen units are provided and address topics such as: (1) steam engineering concepts; (2) boiler fittings; (3) feed-water, steam, and combustion accessories;…

From the eye of the albatrosses: a bird-borne camera shows an association between albatrosses and a killer whale in the Southern Ocean.

PubMed

Sakamoto, Kentaro Q; Takahashi, Akinori; Iwata, Takashi; Trathan, Philip N

2009-10-07

Albatrosses fly many hundreds of kilometers across the open ocean to find and feed upon their prey. Despite the growing number of studies concerning their foraging behaviour, relatively little is known about how albatrosses actually locate their prey. Here, we present our results from the first deployments of a combined animal-borne camera and depth data logger on free-ranging black-browed albatrosses (Thalassarche melanophrys). The still images recorded from these cameras showed that some albatrosses actively followed a killer whale (Orcinus orca), possibly to feed on food scraps left by this diving predator. The camera images together with the depth profiles showed that the birds dived only occasionally, but that they actively dived when other birds or the killer whale were present. This association with diving predators or other birds may partially explain how albatrosses find their prey more efficiently in the apparently 'featureless' ocean, with a minimal requirement for energetically costly diving or landing activities.

From the Eye of the Albatrosses: A Bird-Borne Camera Shows an Association between Albatrosses and a Killer Whale in the Southern Ocean

PubMed Central

Sakamoto, Kentaro Q.; Takahashi, Akinori; Iwata, Takashi; Trathan, Philip N.

2009-01-01

Albatrosses fly many hundreds of kilometers across the open ocean to find and feed upon their prey. Despite the growing number of studies concerning their foraging behaviour, relatively little is known about how albatrosses actually locate their prey. Here, we present our results from the first deployments of a combined animal-borne camera and depth data logger on free-ranging black-browed albatrosses (Thalassarche melanophrys). The still images recorded from these cameras showed that some albatrosses actively followed a killer whale (Orcinus orca), possibly to feed on food scraps left by this diving predator. The camera images together with the depth profiles showed that the birds dived only occasionally, but that they actively dived when other birds or the killer whale were present. This association with diving predators or other birds may partially explain how albatrosses find their prey more efficiently in the apparently ‘featureless’ ocean, with a minimal requirement for energetically costly diving or landing activities. PMID:19809497

Distribution, reproduction, and feeding of West African shrimp Plesionika carinata Holthuis, 1951 (Decapoda, Pandalidae)

NASA Astrophysics Data System (ADS)

Burukovsky, R. N.

2017-09-01

Plesionika carinata is endemic in the West African tropical biogeographical realm and is distributed from the western Sahara coast (23°35' N) to southern Namibia (29° S). A total of 263 individuals with a total carapace length of 31 to 71 mm have been studied. P. carinata juveniles are pelagic and occur over depths from 340 to 2000 m or more, mainly over the lower part of the continental slope in summer and over the upper part of the continental slope in autumn. Adults are mainly benthic and occur on the edge of the shelf and the upper part of the continental slope (at depths of 300 to 880 m). Ovigerous females have 750 to 3330 eggs 0.45-0.5 × 0.5-0.65 mm in size on pleopods. Plesionika carinata feeds on abundant micronectonic and macroplanktonic crustaceans (euphausiids and pelagic shrimps) at earlier pelagic stages; it is detritophagous/necrophagous and predatory near the bottom when adult.

TANK 26 EVAPORATOR FEED PUMP TRANSFER ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tamburello, D; Si Lee, S; Richard Dimenna, R

2008-09-30

The transfer of liquid salt solution from Tank 26 to an evaporator is to be accomplished by activating the evaporator feed pump, located approximately 72 inches above the sludge layer, while simultaneously turning on the downcomer. Previously, activation of the evaporator feed pump was an isolated event without any other components running at the same time. An analysis of the dissolved solution transfer has been performed using computational fluid dynamics methods to determine the amount of entrained sludge solids pumped out of the tank to the evaporator with the downcomer turned on. The analysis results showed that, for the maximummore » and minimum supernate levels in Tank 26 (252.5 and 72 inches above the sludge layer, respectively), the evaporator feed pump will entrain between 0.05 and 0.1 wt% sludge solids weight fraction into the eductor, respectively. Lower tank liquid levels, with respect to the sludge layer, result in higher amounts of sludge entrainment due to the increased velocity of the plunging jets from the downcomer and evaporator feed pump bypass as well as decreased dissipation depth.« less

Effects of temperature and glycerol and methanol-feeding profiles on the production of recombinant galactose oxidase in Pichia pastoris

PubMed Central

Anasontzis, George E; Salazar Penã, Margarita; Spadiut, Oliver; Brumer, Harry; Olsson, Lisbeth

2014-01-01

Optimization of protein production from methanol-induced Pichia pastoris cultures is necessary to ensure high productivity rates and high yields of recombinant proteins. We investigated the effects of temperature and different linear or exponential methanol-feeding rates on the production of recombinant Fusarium graminearum galactose oxidase (EC 1.1.3.9) in a P. pastoris Mut+ strain, under regulation of the AOX1 promoter. We found that low exponential methanol feeding led to 1.5-fold higher volumetric productivity compared to high exponential feeding rates. The duration of glycerol feeding did not affect the subsequent product yield, but longer glycerol feeding led to higher initial biomass concentration, which would reduce the oxygen demand and generate less heat during induction. A linear and a low exponential feeding profile led to productivities in the same range, but the latter was characterized by intense fluctuations in the titers of galactose oxidase and total protein. An exponential feeding profile that has been adapted to the apparent biomass concentration results in more stable cultures, but the concentration of recombinant protein is in the same range as when constant methanol feeding is employed. © 2014 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 30:728–735, 2014 PMID:24493559

Comparison of breast-feeding knowledge, attitudes, and beliefs before and after educational intervention for rural Appalachian high school students.

PubMed

Seidel, Allison K; Schetzina, Karen E; Freeman, Sherry C; Coulter, Meredith M; Colgrove, Nicole J

2013-03-01

Breast-feeding rates in rural and southeastern regions of the United States are lower than national rates and Healthy People 2020 targets. The objectives of this study were to understand current breast-feeding knowledge, attitudes, and beliefs among rural southern Appalachian adolescents and to explore whether a high school educational intervention designed to address the five tenets (knowledge, attitudes, intentions, perceived behavioral control, and subjective norms) of the theory of planned behavior may be effective in increasing future rates of breast-feeding in this population. An educational session including an interactive game was developed and administered to occupational health science students during a single class period in two county high schools. A presurvey and a postsurvey administered 2 weeks after the intervention were completed by students. Pre- and postsurveys were analyzed using paired t tests and Cohen d and potential differences based on sex and grade were explored. Both pre- and postsurveys were completed by 107 students (78%). Knowledge, attitudes about breast-feeding benefits, subjective norms, and intentions significantly improved following the intervention. Baseline knowledge and attitudes about breast-feeding benefits for mothers were low and demonstrated the greatest improvement. Offering breast-feeding education based on the theory of planned behavior in a single high school class session was effective in improving student knowledge, attitudes, and beliefs about breast-feeding and intention to breast-feed.

Icelandic herring-eating killer whales feed at night.

PubMed

Richard, Gaëtan; Filatova, Olga A; Samarra, Filipa I P; Fedutin, Ivan D; Lammers, Marc; Miller, Patrick J

2017-01-01

Herring-eating killer whales debilitate herring with underwater tail slaps and likely herd herring into tighter schools using a feeding-specific low-frequency pulsed call ('herding' call). Feeding on herring may be dependent upon daylight, as the whales use their white underside to help herd herring; however, feeding at night has not been investigated. The production of feeding-specific sounds provides an opportunity to use passive acoustic monitoring to investigate feeding behaviour at different times of day. We compared the acoustic behaviour of killer whales between day and night, using an autonomous recorder deployed in Iceland during winter. Based upon acoustic detection of underwater tail slaps used to feed upon herring we found that killer whales fed both at night and day: they spent 50% of their time at night and 73% of daytime feeding. Interestingly, there was a significant diel variation in acoustic behaviour. Herding calls were significantly associated with underwater tail slap rate and were recorded significantly more often at night, suggesting that in low-light conditions killer whales rely more on acoustics to herd herring. Communicative sounds were also related to underwater tail slap rate and produced at different rates during day and night. The capability to adapt feeding behaviour to different light conditions may be particularly relevant for predator species occurring in high latitudes during winter, when light availability is limited.

Hospital-wide breastfeeding rates vs. breastmilk provision for very-low-birth-weight infants.

PubMed

Lee, Henry C; Jegatheesan, Priya; Gould, Jeffrey B; Dudley, Raymond A

2013-03-01

To investigate the relationship between breastmilk feeding in very-low-birth-weight infants in the neonatal intensive care unit and breastmilk feeding rates for all newborns by hospital. This was a cross-sectional study of 111 California hospitals in 2007 and 2008. Correlation coefficients were calculated between overall hospital breastfeeding rates and breastmilk feeding rates of very-low-birth-weight infants. Hospitals were categorized in quartiles by crude and adjusted very-low-birth-weight infant rates to compare rankings between measures. Correlation between breastmilk feeding rates of very-low-birth-weight infants and overall breastfeeding rates varied by neonatal intensive care unit level of care from 0.13 for intermediate hospitals to 0.48 for regional hospitals. For hospitals categorized in the top quartile according to overall breastfeeding rate, only 46% were in the top quartile for both crude and adjusted very-low-birth-weight infant rates. On the other hand, when considering the lowest quartile for overall breastfeeding hospitals, three of 27 (11%) actually were performing in the top quartile of performance for very-low-birth-weight infant rates. Reporting hospital overall breastfeeding rates and neonatal intensive care unit breastmilk provision rates separately may give an incomplete picture of quality of care. ©2012 The Author(s)/Acta Paediatrica ©2012 Foundation Acta Paediatrica.

Food Selectivity and Diet Switch Can Explain the Slow Feeding of Herbivorous Coral-Reef Fishes during the Morning

PubMed Central

Khait, Ruth; Obolski, Uri; Hadany, Lilach; Genin, Amatzia

2013-01-01

Most herbivorous coral-reef fishes feed slower in the morning than in the afternoon. Given the typical scarcity of algae in coral reefs, this behavior seems maladaptive. Here we suggest that the fishes' slow feeding during the morning is an outcome of highly selective feeding on scarcely found green algae. The rarity of the food requires longer search time and extended swimming tracks, resulting in lower bite rates. According to our findings by noon the fish seem to stop their search and switch to indiscriminative consumption of benthic algae, resulting in apparent higher feeding rates. The abundance of the rare preferable algae gradually declines from morning to noon and seems to reach its lowest levels around the switch time. Using in situ experiments we found that the feeding pattern is flexible, with the fish exhibiting fast feeding rates when presented with ample supply of preferable algae, regardless of the time of day. Analyses of the fish's esophagus content corroborated our conclusion that their feeding was highly selective in the morning and non-selective in the afternoon. Modeling of the fishes' behavior predicted that the fish should perform a diel diet shift when the preferred food is relatively rare, a situation common in most coral reefs found in a warm, oligotrophic ocean. PMID:24358178

Food selectivity and diet switch can explain the slow feeding of herbivorous coral-reef fishes during the morning.

PubMed

Khait, Ruth; Obolski, Uri; Hadany, Lilach; Genin, Amatzia

2013-01-01

Most herbivorous coral-reef fishes feed slower in the morning than in the afternoon. Given the typical scarcity of algae in coral reefs, this behavior seems maladaptive. Here we suggest that the fishes' slow feeding during the morning is an outcome of highly selective feeding on scarcely found green algae. The rarity of the food requires longer search time and extended swimming tracks, resulting in lower bite rates. According to our findings by noon the fish seem to stop their search and switch to indiscriminative consumption of benthic algae, resulting in apparent higher feeding rates. The abundance of the rare preferable algae gradually declines from morning to noon and seems to reach its lowest levels around the switch time. Using in situ experiments we found that the feeding pattern is flexible, with the fish exhibiting fast feeding rates when presented with ample supply of preferable algae, regardless of the time of day. Analyses of the fish's esophagus content corroborated our conclusion that their feeding was highly selective in the morning and non-selective in the afternoon. Modeling of the fishes' behavior predicted that the fish should perform a diel diet shift when the preferred food is relatively rare, a situation common in most coral reefs found in a warm, oligotrophic ocean.

[Assessment of breast feeding rates during compulsory vaccination: preliminary outcomes].

PubMed

Candriella, M; Uga, E; Perino, A; Angilella, G; Alloni, V; Trada, M; Grossi, L; Tripaldi, C; Bagnasco, G; Silano, V; Olmo, L M; Allen, M; Provera, S

2009-02-01

In consideration of the World Health Organization (WHO) recommendations on promoting and supporting breast feeding, a measurement of breast feeding rates was planned within Vercelli's Province (ASL 11, Piedmont, Italy) in order to compare the local situation to the national and international one, and to promote ideas and strategies for increasing the practice of breast feeding up to six months or beyond. During Diptheria Tetanus whole cell Pertussis vaccination (DTP) vaccination a questionnaire about their children's feeding was handed out to all mothers. Preliminary outcomes were elaborated after a follow-up of six months. So far 1591 questionnaires have been collected. During the first DTP immunizations 31.63% of the children were exclusively breastfed and 15.81% were partially breastfed. At the second vaccination, 11.14% and 37.68% of infants were completely and partially breastfed, respectively. A 36.11% of partially breast feeding still emerged during the third DTP vaccination. The outcomes of this study are inferior compared to WHO expectation and to national statistics. Increasing breast feeding rates should consequently become a priority aim, pursuing it through the health workers training, the support of mothers who encounter difficulties during their hospital stay or at home, and making the public aware of breast feeding practices.

EFFECTS OF QUARTZ PARTICLE SIZE AND SUCROSE ADDITION ON MELTING BEHAVIOR OF A MELTER FEED FOR HIGH-LEVEL GLASS

DOE Office of Scientific and Technical Information (OSTI.GOV)

MARCIAL J; KRUGER AA; HRMA PR

2010-07-28

The behavior of melter feed (a mixture of nuclear waste and glass-forming additives) during waste-glass processing has a significant impact on the rate of the vitrification process. We studied the effects of silica particle size and sucrose addition on the volumetric expansion (foaming) of a high-alumina feed and the rate of dissolution of silica particles in feed samples heated at 5 C/min up to 1200 C. The initial size of quartz particles in feed ranged from 5 to 195 {micro}m. The fraction of the sucrose added ranged from 0 to 0.20 g per g glass. Extensive foaming occurred only inmore » feeds with 5-{micro}m quartz particles; particles {ge}150 {micro}m formed clusters. Particles of 5 {micro}m completely dissolved by 900 C whereas particles {ge}150 {micro}m did not fully dissolve even when the temperature reached 1200 C. Sucrose addition had virtually zero impact on both foaming and the dissolution of silica particles. Over 100 sites in the United States are currently tasked with the storage of nuclear waste. The largest is the Hanford Site located in southeastern Washington State with 177 subterranean tanks containing over fifty-million gallons of nuclear waste from plutonium production from 1944 through 1987. This waste will be vitrified at the Hanford Tank Waste Treatment and Immobilization Plant. In the vitrification process, feed is charged into a melter and converted into glass to be ultimately stored in a permanent repository. The duration of waste-site cleanups by the vitrification process depends on the rate of melting, i.e., on the rate of the feed-to-glass conversion. Foaming associated with the melting process and the rate of dissolution of quartz particles (silica being the major glass-forming additive) are assumed to be important factors that influence the rate of melting. Previous studies on foaming of high-alumina feed demonstrated that varying the makeup of a melter feed has a significant impact on foaming. The volume of feeds that contained 5-{micro}m quartz particles substantially increased because of foaming. The extent of foaming decreased as the particle size of quartz increased. Moreover, samples containing quartz particles 195 {micro}m formed agglomerates at temperatures above 900 C that only slowly dissolved in the melt. This study continues previous work on the feed-melting process, specifically on the effects of the size of silica particles on the formation of nuclear-waste glasses to determine a suitable range of silica particle sizes that causes neither excessive foaming nor undesirable agglomeration. Apart from varying the silica-particle size, carbon was added in the form of sucrose. Sucrose has been used to accelerate the rate of melting. In this study, we have observed its impact on feed foaming and quartz dissolution.« less

[Research about effect of spray drying conditions on hygroscopicity of spray dry powder of gubi compound's water extract and its mechanism].

PubMed

Zong, Jie; Shao, Qi; Zhang, Hong-Qing; Pan, Yong-Lan; Zhu, Hua-Xu; Guo, Li-Wei

2014-02-01

To investigate moisture content and hygroscopicity of spray dry powder of Gubi compound's water extract obtained at different spray drying conditions and laying a foundation for spray drying process of Chinese herbal compound preparation. In the paper, on the basis of single-factor experiments, the author choose inlet temperature, liquid density, feed rate, air flow rate as investigated factors. The experimental absorption rate-time curve and scanning electron microscopy results showed that under different spray drying conditions the spray-dried powders have different morphology and different adsorption process. At different spray-dried conditions, the morphology and water content of the powder is different, these differences lead to differences in the adsorption process, at the appropriate inlet temperature and feed rate with a higher sample density and lower air flow rate, in the experimental system the optimum conditions is inlet temperature of 150 degrees C, feed density of 1.05 g x mL(-1), feed rate of 20 mL x min(-1) air flow rate of 30 m3 x h(-1).

40 CFR 63.606 - Performance tests and compliance provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... P2O5 feed rate, metric ton/hr (ton/hr). K = conversion factor, 1000 mg/g (453,600 mg/lb). (2) Method... fluorides, g/metric ton (lb/ton) of equivalent P2O5 feed. Csi = concentration of total fluorides from... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content...

40 CFR 63.606 - Performance tests and compliance provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... P2O5 feed rate, metric ton/hr (ton/hr). K = conversion factor, 1000 mg/g (453,600 mg/lb). (2) Method... fluorides, g/metric ton (lb/ton) of equivalent P2O5 feed. Csi = concentration of total fluorides from... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content...

40 CFR 63.606 - Performance tests and compliance provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... P2O5 feed rate, metric ton/hr (ton/hr). K = conversion factor, 1000 mg/g (453,600 mg/lb). (2) Method... fluorides, g/metric ton (lb/ton) of equivalent P2O5 feed. Csi = concentration of total fluorides from... Where: Mp = total mass flow rate of phosphorus-bearing feed, metric ton/hr (ton/hr). Rp = P2O5 content...

Assessing the population impact of low rates of breast feeding on asthma, coeliac disease and obesity: the use of a new statistical method.

PubMed

Akobeng, Anthony K; Heller, Richard F

2007-06-01

Lack of breast feeding has been reported to be associated with a number of chronic childhood disorders. To use a recently described measure, the population impact number of eliminating a risk factor over a time period (PIN-ER-t), to quantify the burden of low rates of breast feeding in a UK population of babies born in 2002 with regard to asthma, coeliac disease and obesity. We performed literature searches for systematic reviews with meta-analyses that had investigated the association between breast feeding and asthma, coeliac disease and obesity. Based on these data, and published data on the prevalence of breast feeding and the prevalence of the disorders, we calculated PIN-ER-t and estimated the number of cases of each disorder which could be prevented by eliminating "no breast feeding" as a risk factor. In the population of the 596 122 babies born in England and Wales in 2002, the number of cases of asthma, coeliac disease and obesity that could be prevented over 7-9 years if "no breast feeding" as a risk factor was eliminated were 33 100 (95% CI 17,710 to 47,543), 2655 (95% CI 1937 to 3343) and 13639 (95% CI 7838 to 19308), respectively. The population burden of low breast feeding rates is high with regard to these chronic disorders. The use of PIN-ER-t allows the population burden of low breast feeding rates to be quantified and communicated in a way that will make it easier for both the general public and decision makers to understand.

Effect of a hospital policy of not accepting free infant formula on in-hospital formula supplementation rates and breast-feeding duration.

PubMed

Tarrant, Marie; Lok, Kris Yw; Fong, Daniel Yt; Lee, Irene Ly; Sham, Alice; Lam, Christine; Wu, Kendra M; Bai, Dorothy L; Wong, Ka Lun; Wong, Emmy My; Chan, Noel Pt; Dodgson, Joan E

2015-10-01

To investigate the effect of public hospitals in Hong Kong not accepting free infant formula from manufacturers on in-hospital formula supplementation rates and breast-feeding duration. Prospective cohort study. In-patient postnatal units of four public hospitals in Hong Kong. Two cohorts of breast-feeding mother-infant pairs (n 2560). Cohort 1 (n 1320) was recruited before implementation of the policy to stop accepting free infant formula and cohort 2 (n 1240) was recruited after policy implementation. Participants were followed prospectively for 12 months or until they stopped breast-feeding. The mean number of formula supplements given to infants in the first 24 h was 2·70 (sd 3·11) in cohort 1 and 1·17 (sd 1·94) in cohort 2 (P<0·001). The proportion of infants who were exclusively breast-fed during the hospital stay increased from 17·7 % in cohort 1 to 41·3 % in cohort 2 (P<0·001) and the risk of breast-feeding cessation was significantly lower in cohort 2 (hazard ratio=0·81; 95 % CI 0·73, 0·90). Participants who non-exclusively breast-fed during the hospital stay had a significantly higher risk of stopping any or exclusive breast-feeding. Higher levels of formula supplementation also increased the risk of breast-feeding cessation in a dose-response pattern. After implementation of a hospital policy to pay market price for infant formula, rates of in-hospital formula supplementation were reduced and the rates of in-hospital exclusive breast-feeding and breast-feeding duration increased.

Ecophysiology of Nais elinguis (Oligochaeta) in a brackish-water lagoon

NASA Astrophysics Data System (ADS)

Little, Colin

1984-02-01

Population densities of Nais elinguis Müller were determined in Swanpool, a brackish-water lagoon at Falmouth, Cornwall, U.K., over a four-year period. High densities were found only from January to May, usually with a peak in March. Significant negative correlations were shown between population density and both salinity and temperature. In laboratory tests, feeding rates remained unchanged from freshwater to 20‰ salinity (S), but declined above this salinity. Nais elinguis was shown to be a good osmoregulator, remaining hyperosmotic below 7‰ S, and hypo-osmotic above this. Feeding rate showed a Q 10 of approximately 2 from 1 to 25°C, but above this the rate declined. Feeding rate was unaffected between pH 6 and 11. Increased salinity to (10‰ S) did not influence the effect of temperature on feeding rate. This high salinity did reduce feeding rate at a pH of 10 and above. It is concluded that the physical and chemical variables considered are unlikely to be direct causal factors limiting populations of N. elinguis in Swanpool. The influence of food supply, competition, predation and changes in reproductive mode are discussed as possible controlling factors. It is shown that the population decline of N. elinguis in early summer usually coincides with the rise of populations of chironomid larvae.

A simple rule for the costs of vigilance: empirical evidence from a social forager.

PubMed Central

Cowlishaw, Guy; Lawes, Michael J.; Lightbody, Margaret; Martin, Alison; Pettifor, Richard; Rowcliffe, J. Marcus

2004-01-01

It is commonly assumed that anti-predator vigilance by foraging animals is costly because it interrupts food searching and handling time, leading to a reduction in feeding rate. When food handling does not require visual attention, however, a forager may handle food while simultaneously searching for the next food item or scanning for predators. We present a simple model of this process, showing that when the length of such compatible handling time Hc is long relative to search time S, specifically Hc/S > 1, it is possible to perform vigilance without a reduction in feeding rate. We test three predictions of this model regarding the relationships between feeding rate, vigilance and the Hc/S ratio, with data collected from a wild population of social foragers (samango monkeys, Cercopithecus mitis erythrarchus). These analyses consistently support our model, including our key prediction: as Hc/S increases, the negative relationship between feeding rate and the proportion of time spent scanning becomes progressively shallower. This pattern is more strongly driven by changes in median scan duration than scan frequency. Our study thus provides a simple rule that describes the extent to which vigilance can be expected to incur a feeding rate cost. PMID:15002768

DIRECT MEASUREMENT TECHNIQUE FOR THE DETERMINING VENTILATION RATE IN THE DEPOSIT FEEDING CLAM, MACOMA NASUTA (BIVALVIA, TELLINACEAE)

EPA Science Inventory

An exposure chamber, the "clambox", was developed to measure ventilation rate, sediment processing rate, and efficiency of pollutant uptake byMacoma nasuta Conrad, a surface surface deposit-feeding clams. Clams, collected from Yaquina, Bay, Oregon, USA, were cemented into a hole ...

Shifting roles of heterotrophy and autotrophy in coral energetics under varying turbidity.

PubMed

Anthony; Fabricius

2000-09-20

Suspended particulate matter (SPM) strongly alters the trophic environment of photosymbiotic aquatic organisms. At high particles loads, phototrophic energy gains can be diminished due to light absorption by suspended particles, and stress from particle abrasion or deposition on tissues. However, energy gains are enhanced if organisms are able to use SPM as a food source. For photosymbiotic benthic suspension feeders, increases in SPM concentrations may require both phototrophic and heterotrophic acclimation to sustain a positive energy balance. This study provides an experimental analysis of the effects of contrasting light and SPM regimes on the energy budget (scope for growth) of two zooxanthellate corals (Goniastrea retiformis and Porites cylindrica). Using a factorial design in a flow-through tank system, corals were exposed for 2 months to shaded and unshaded conditions (equivalent to 3-4 m depth at 4 and 16 mg dry weight SPM l(-1), respectively) and a range of controlled SPM loads with a natural organic content ( approximately 3% w/w). In G. retiformis, rates of particle ingestion were a linear function of SPM concentration within a broad range (1-30 mg dry weight l(-1)). After 2 months of shading, photosynthetic acclimation was significant in G. retiformis, but did not compensate for the reduced light level, as daily respiration exceeded daily photosynthesis. However, in response to the prolonged shading, G. retiformis more than doubled its rate of particle feeding. At high SPM treatments (16 mg dw l(-1)), sediment feeding by this species compensated fully for the 35-47% lower phototrophy in the shaded treatment. Due to both photo- and heterotrophic plasticity, G. retiformis gained tissue and skeletal mass at all experimental levels of light and SPM. In contrast, rates of particle intake by P. cylindrica contributed <10% to the energy budget in shaded and <3% in unshaded conditions. Feeding rates of P. cylindrica were half-saturated at approximately 3 mg dry weight l(-1), and four- to eight-fold lower than those of G. retiformis. Skeletal growth was sustained, but tissue mass and lipid contents declined in shaded and high-SPM treatments, and carbon loss due to shading by SPM was not compensated for by particle feeding. Thus, due to a lack of photo- and heterotrophic plasticity, periods of high turbidity resulted in energy deficiency in P. cylindrica, and high turbidity conditions appeared physiologically unsustainable for this species. This study is the first to show heterotrophic plasticity in a symbiotic coral, and to show that such plasticity can offset stress from high particle loads. It demonstrates that changes in the trophic mode of some coral species are a mechanism for sustaining a positive energy balance in turbid environments, thereby broadening their physiological niche.

Peculiar liquid-feeding and pathogen transmission behavior of Aedes togoi and comparison with Anopheles sinensis.

PubMed

Lee, Sang Joon; Kang, Dooho; Lee, Seung Chul; Ha, Young-Ran

2016-02-03

Female mosquitoes transmit various diseases as vectors during liquid-feeding. Identifying the determinants of vector efficiency is a major scientific challenge in establishing strategies against these diseases. Infection rate and transmission efficiency are interconnected with the mosquito-induced liquid-feeding flow as main indexes of vector efficiency. However, the relationship between liquid-feeding characteristics and pathogen remains poorly understood. The liquid-feeding behavior of Aedes togoi and Anopheles sinensis was comparatively investigated in conjunction with vector efficiency via micro-particle image velocimetry. The flow rates and ratio of the ejection volume of Aedes togoi were markedly higher than those of Anophels sinensis. These differences would influence pathogen re-ingestion. Wall shear stresses of these mosquito species were also clearly discriminatory affecting the infective rates of vector-borne diseases. The variations in volume of two pump chambers and diameter of proboscis of these mosquito species were compared to determine the differences in the liquid-feeding process. Liquid-feeding characteristics influence vector efficiency; hence, this study can elucidate the vector efficiency of mosquitoes and the vector-pathogen interactions and contribute to the development of strategies against vector-borne diseases.

Peculiar liquid-feeding and pathogen transmission behavior of Aedes togoi and comparison with Anopheles sinensis

NASA Astrophysics Data System (ADS)

Lee, Sang Joon; Kang, Dooho; Lee, Seung Chul; Ha, Young-Ran

2016-02-01

Female mosquitoes transmit various diseases as vectors during liquid-feeding. Identifying the determinants of vector efficiency is a major scientific challenge in establishing strategies against these diseases. Infection rate and transmission efficiency are interconnected with the mosquito-induced liquid-feeding flow as main indexes of vector efficiency. However, the relationship between liquid-feeding characteristics and pathogen remains poorly understood. The liquid-feeding behavior of Aedes togoi and Anopheles sinensis was comparatively investigated in conjunction with vector efficiency via micro-particle image velocimetry. The flow rates and ratio of the ejection volume of Aedes togoi were markedly higher than those of Anophels sinensis. These differences would influence pathogen re-ingestion. Wall shear stresses of these mosquito species were also clearly discriminatory affecting the infective rates of vector-borne diseases. The variations in volume of two pump chambers and diameter of proboscis of these mosquito species were compared to determine the differences in the liquid-feeding process. Liquid-feeding characteristics influence vector efficiency; hence, this study can elucidate the vector efficiency of mosquitoes and the vector-pathogen interactions and contribute to the development of strategies against vector-borne diseases.

Heat rejection sublimator

NASA Technical Reports Server (NTRS)

Dingell, Charles W. (Inventor); Quintana, Clemente E. (Inventor); Le, Suy (Inventor); Clark, Michael R. (Inventor); Cloutier, Robert E. (Inventor); Hafermalz, David Scott (Inventor)

2009-01-01

A sublimator includes a sublimation plate having a thermal element disposed adjacent to a feed water channel and a control point disposed between at least a portion of the thermal element and a large pore substrate. The control point includes a sintered metal material. A method of dissipating heat using a sublimator includes a sublimation plate having a thermal element and a control point. The thermal element is disposed adjacent to a feed water channel and the control point is disposed between at least a portion of the thermal element and a large pore substrate. The method includes controlling a flow rate of feed water to the large pore substrate at the control point and supplying heated coolant to the thermal element. Sublimation occurs in the large pore substrate and the controlling of the flow rate of feed water is independent of time. A sublimator includes a sublimation plate having a thermal element disposed adjacent to a feed water channel and a control point disposed between at least a portion of the thermal element and a large pore substrate. The control point restricts a flow rate of feed water from the feed water channel to the large pore substrate independent of time.

40 CFR 60.224 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr (ton... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...

40 CFR 60.214 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr (ton... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...

40 CFR 60.214 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr (ton... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...

40 CFR 60.224 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr (ton... determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...

Determination of Optimum Cutting Parameters for Surface Roughness in Turning AL-B4C Composites

NASA Astrophysics Data System (ADS)

Channabasavaraja, H. K.; Nagaraj, P. M.; Srinivasan, D.

2016-09-01

Many materials such as alloys, composites find their applications on the basis of machinability, cost and availability. In the present work, machinability of Aluminium 1100 and Boron carbide (AL+ B4C) composite material is examined by using lathe tool dynometers (BANKA Lathe) by varying the cutting parameters like spindle speed, Depth of cut and Feed rate in 3 levels. Also, surface roughness is measured against the weight % of reinforcement in the composite (0, 4 and 8 %). From the study it is observed that the hardness of a composite material increases with increase in weight % of reinforcement material (B4C) by 26.27 and 66.7 % respectively. The addition of reinforcement materials influences the machinability. The cutting force in both X and Z direction were also found increment with the reinforcement percentage.

Effects of liquid feeding of corn condensed distiller's solubles and whole stillage on growth performance, carcass characteristics, and sensory traits of pigs.

PubMed

Yang, Xiaojian; Nath, Carissa; Doering, Alan; Goihl, John; Baidoo, Samuel Kofi

2017-01-01

The immense growth in global bioethanol production has greatly increased the supply of by-products such as whole stillage and condensed distiller's solubles, which could be potentially used for animal feeding. The objective of this study was to investigate effects of liquid feeding high levels of corn condensed distiller's solubles (CCDS) and whole stillage (CWS) on growth performance, carcass characteristics, belly firmness and meat sensory traits of pigs. A total of 256 pigs were blocked by sex and initial BW (13.5 ± 2.5 kg), and pens of pigs (8 pigs/pen) were randomly allocated to 1 of 4 dietary treatments (8 pens/treatment): 1) corn-soybean meal based diet as control, 2) 25% CWS + 5% CCDS, 3) 19.5% CWS + 10.5% CCDS, and 4) 19.5, 26, and 32.5% CWS + 10.5, 14, and 17.5% CCDS in phases 1 (28 d), 2 (38 d), and 3 (60 d), respectively. Inclusion levels of CCDS and CWS for Treatments 1, 2, and 3 were fixed during all the three phases of the experiment. Inclusion levels of CWS and CCDS were on 88% dry matter basis. The liquid feeding system delivered feed from the mixing tank to feed troughs by high-pressure air, had sensors inside feed troughs, and recorded daily feed intake on the basis of a reference feed intake curve. The pigs were fed 5 to 10 times per day with increasing frequency during the experiment. Control pigs had greater ( P  < 0.05) average daily gain (0.91 vs. 0.84, 0.85, 0.85 kg/d) and gain to feed ratio (0.37 vs. 0.33, 0.34, 0.34) than pigs in the other three treatments during the overall period. Compared with the control, the other three groups had ( P  < 0.05) or tended to have ( P  < 0.10) lower carcass weight and backfat depth due to lighter ( P  < 0.05) slaughter body weight, but similar ( P  > 0.10) dressing percentage, loin muscle depth, and lean percentage were observed among the four treatments. Inclusion of CWS and CCDS reduced ( P  < 0.05) or tended to reduce ( P  < 0.10) belly firmness but did not influence ( P  > 0.10) the overall like, flavor, tenderness and juiciness of loin chops when compared with the control group. In conclusion, our results indicate that including 30-50% of a mixture of whole stillage and condensed distiller's solubles in the growing-finishing diets may reduce growth performance, carcass weight and belly firmness, but does not affect pork sensory traits.

Breast-feeding initiation in low-income women: Role of attitudes, support, and perceived control.

PubMed

Khoury, Amal J; Moazzem, S Wakerul; Jarjoura, Chad M; Carothers, Cathy; Hinton, Agnes

2005-01-01

Despite the documented health and emotional benefits of breast-feeding to women and children, breast-feeding rates are low among subgroups of women. In this study, we examine factors associated with breast-feeding initiation in low-income women, including Theory of Planned Behavior measures of attitude, support, and perceived control, as well as sociodemographic characteristics. A mail survey, with telephone follow-up, of 733 postpartum Medicaid beneficiaries in Mississippi was conducted in 2000. The breast-feeding initiation rate in this population was 38%. Women who were older, white, non-Hispanic, college-educated, married, not certified for the Supplemental Nutrition Program for Women, Infants, and Children, and not working full-time were more likely to breast-feed than formula-feed at hospital discharge. Attitudes regarding benefits and barriers to breast-feeding, as well as health care system and social support, were associated with breast-feeding initiation at the multivariate level. Adding the health care system support variables to the regression model, and specifically support from lactation specialists and hospital nurses, explained the association between breast-feeding initiation and women's perceived control over the time and social constraints barriers to breast-feeding. The findings support the need for health care system interventions, family interventions, and public health education campaigns to promote breast-feeding in low-income women.

Method for controlling gas metal arc welding

DOEpatents

Smartt, H.B.; Einerson, C.J.; Watkins, A.D.

1987-08-10

The heat input and mass input in a Gas Metal Arc welding process are controlled by a method that comprises calculating appropriate values for weld speed, filler wire feed rate and an expected value for the welding current by algorithmic function means, applying such values for weld speed and filler wire feed rate to the welding process, measuring the welding current, comparing the measured current to the calculated current, using said comparison to calculate corrections for the weld speed and filler wire feed rate, and applying corrections. 3 figs., 1 tab.

AN EXPERIMENTAL STUDY OF CUTTING FLUID EFFECTS IN DRILLING. (R825370C057)

EPA Science Inventory

Experiments were designed and conducted on aluminum alloys and gray cast iron to determine the function of cutting fluid in drilling. The variables examined included speed, feed, hole depth, tool and workpiece material, cutting fluid condition, workpiece temperatures and drill...

Interactions between the mixotrophic dinoflagellate Takayama helix and common heterotrophic protists.

PubMed

Ok, Jin Hee; Jeong, Hae Jin; Lim, An Suk; Lee, Kyung Ha

2017-09-01

The phototrophic dinoflagellate Takayama helix that is known to be harmful to abalone larvae has recently been revealed to be mixotrophic. Although mixotrophy elevates the growth rate of T. helix by 79%-185%, its absolute growth rate is still as low as 0.3d -1 . Thus, if the mortality rate of T. helix due to predation is high, this dinoflagellate may not easily prevail. To investigate potential effective protistan grazers on T. helix, feeding by diverse heterotrophic dinoflagellates such as engulfment-feeding Oxyrrhis marina, Gyrodinium dominans, Gyrodinium moestrupii, Polykrikos kofoidii, and Noctiluca scintillans, peduncle-feeding Aduncodinium glandula, Gyrodiniellum shiwhaense, Luciella masanensis, and Pfiesteria piscicida, pallium-feeding Oblea rotunda and Protoperidinium pellucidum, and the naked ciliates Pelagostrobilidium sp. (ca. 40μm in cell length) and Strombidinopsis sp. (ca. 150μm in cell length) on T. helix was explored. Among the tested heterotrophic protists, O. marina, G. dominans, G. moestrupii, A. glandula, L. masanensis, P. kofoidii, P. piscicida, and Strombidinopsis sp. were able to feed on T. helix. The growth rates of all these predators except Strombidinopsis sp. with T. helix prey were lower than those without the prey. The growth rate of Strombidinopsis sp. on T. helix was almost zero although the growth rate of Strombidinopsis sp. with T. helix prey was higher than those without the prey. Moreover, T. helix fed on O. marina and P. pellucidum and lysed the cells of P. kofoidii and G. shiwhaense. With increasing the concentrations of T. helix, the growth rates of O. marina and P. kofoidii decreased, but those of G. dominans and L. masanensis largely did not change. Therefore, reciprocal predation, lysis, no feeding, and the low ingestion rates of the common protists preying on T. helix may result in a low mortality rate due to predation, thereby compensating for this species' low growth rate. Copyright © 2017 Elsevier B.V. All rights reserved.

Council tax valuation band predicts breast feeding and socio-economic status in the ALSPAC study population.

PubMed

Beale, Norman; Kane, Gill; Gwynne, Mark; Peart, Carole; Taylor, Gordon; Herrick, David; Boyd, Andy

2006-01-11

Breast-feeding rates in the UK are known to vary by maternal socio-economic status but the latter function is imperfectly defined. We test if CTVB (Council Tax Valuation Band - a categorical assessment of UK property values and amenities governing local tax levies) of maternal address predicts, in a large UK regional sample of births, (a) breast-feeding (b) personal and socio-economic attributes of the mothers. Retrospective study of a subset (n.1390 selected at random) of the ALSPAC sample (Avon Longitudinal Study of Parents and Children), a large, geographically defined cohort of mothers followed from early pregnancy to 8 weeks post-delivery. Outcome measures are attitudes to breast-feeding prior to delivery, breast-feeding intention and uptake, demographic and socio-economic attributes of the mothers, CTVB of maternal home address at the time of each birth. Logistic regression analysis, categorical tests. 1360 women divided across the CTVBs--at least 155 in any band or band aggregation. CTVB predicted only one belief or attitude--that bottle-feeding was more convenient for the mother. However only 31% of 'CTVB A infants' are fully breast fed at 4 weeks of life whereas for 'CTVB E+ infants' the rate is 57%. CTVB is also strongly associated with maternal social class, home conditions, parental educational attainment, family income and smoking habit. CTVB predicts breast-feeding rates and links them with social circumstances. CTVB could be used as the basis for accurate resource allocation for community paediatric services: UK breast-feeding rates are low and merit targeted promotion.

The Influence of Shredder Feeding on Fungal Activity in a Nutrient-Enriched Stream and an Unaltered Stream

NASA Astrophysics Data System (ADS)

Chung, N.; Suberkopp, K.

2005-05-01

The effect of shredder feeding on aquatic hyphomycete communities associated with submerged leaves was studied in two southern Appalachian headwater streams in North Carolina. Coarse and fine mesh litter bags containing red maple (Acer rubrum) leaves were placed in the nutrient-enriched stream and in the reference stream and were retrieved monthly. Both shredder feeding and nutrient enrichment enhanced breakdown rates. The breakdown rates of leaves in coarse mesh bags in the reference stream (k = 0.0275) and fine mesh bags in the nutrient enriched stream (k = 0.0272) were not significantly different, suggesting that the shredding effect on litter breakdown was offset by higher fungal activity as a result of nutrient enrichment. Fungal sporulation rates and biomass (based on ergosterol concentrations) were higher in the nutrient enriched than in the reference stream, but neither fungal biomass nor sporulation rate was affected by shredder feeding. Species richness was higher in the nutrient-enriched than in the reference stream. The enrichment with nutrients altered fungal community composition more than shredder feeding.

Effects of narasin (Skycis) on live performance and carcass traits of finishing pigs sold in a three-phase marketing system.

PubMed

Arkfeld, E K; Carr, S N; Rincker, P J; Gruber, S L; Allee, G L; Dilger, A C; Boler, D D

2015-10-01

The objective was to evaluate the effect of feeding narasin (Skycis; Elanco Animal Health, Greenfield, IN) on growth performance and carcass characteristics of finishing pigs sold in a 3-phase marketing system. Pigs ( = 1,232) were housed in 56 single-sex pens (22 pigs/pen) divided into 2 even blocks based on initiation of treatment. Each treatment × sex combination was replicated 14 times. Pigs were fed either 0 mg/kg narasin (control) or 15 mg/kg narasin for up to 85 d of finishing (initiated at an average of 52.95 kg BW). In each pen, 18% (4 pigs per pen) of pigs were sold in the first marketing group (Day 64 of dietary treatment), 50% (11 of the original 22) were sold in the second marketing group (Day 78), and 32% (the remaining 7 pigs) were sold in the third marketing group (Day 85). Data were analyzed as a randomized complete block design with pen as the experimental unit. The model included the fixed effects of diet, sex, and their interaction. Block and replicate nested within block were random variables. Carcass data from pigs in marketing group 3 of block 2 was not collected due to inclement weather. Narasin had no effect on growth performance traits ( ≥ 0.15) in phases 1 (Days 1-28) or 2 (Days 29-56), regardless of sex. Barrows fed narasin had a 2.0% greater overall (Day 0-85) ADG than barrows fed the control diet ( < 0.01), but ADG of gilts was not different due to diet ( = 0.69). Regardless of sex, narasin improved ( = 0.03) feed efficiency (G:F) by 1.3% throughout the 85-d feeding period. There were no effects ( ≥ 0.21) of narasin on carcass composition in marketing groups 1 and 2. Narasin-fed barrows in marketing group 3 had 0.9 percentage units lower ( < 0.01) estimated carcass lean compared with barrows fed control diets (51.0 vs. 52.0%); no difference existed in gilts ( = 0.21). This is likely due to narasin-fed barrows of marketing group 3 tending ( = 0.06) to have 7.7% greater fat depth than control barrows of marketing group 3. Pooled effects (across all 3 marketing groups) of feeding narasin tended ( = 0.08) to reduce loin depth by 1.1% (60.00 vs. 60.66 mm), but there were no effects on fat depth ( = 0.24) or estimated carcass lean ( = 0.11). Overall, narasin can be used during the last 85 d of feeding to increase feed efficiency of barrows and gilts with minimal impact on carcass composition.

Dual wire weld feed proportioner

NASA Technical Reports Server (NTRS)

Nugent, R. E.

1968-01-01

Dual feed mechanism enables proportioning of two different weld feed wires during automated TIG welding to produce a weld alloy deposit of the desired composition. The wires are fed into the weld simultaneously. The relative feed rates of the wires and the wire diameters determine the weld deposit composition.

Infant feeding in Eastern Scotland: a longitudinal mixed methods evaluation of antenatal intentions and postnatal satisfaction--the Feeding Your Baby study.

PubMed

Symon, Andrew G; Whitford, Heather; Dalzell, Janet

2013-07-01

breast-feeding initiation rates have improved in Scotland, but exclusive and partial breast-feeding rates fall rapidly for several reasons. We aimed to examine whether antenatal feeding intention was associated with satisfaction with infant feeding method; and to explore the similarities and differences in infant feeding experience of women with different antenatal feeding intention scores. antenatal questionnaire assessment of infant feeding intentions, based on the theory of planned behaviour; two-weekly postnatal follow-up of infant feeding practice by text messaging; final telephone interview to determine reasons for and satisfaction with infant feeding practice. 355 women in eastern Scotland were recruited antenatally; 292 completed postnatal follow up. Antenatal feeding intentions broadly predicted postnatal practice. The highest satisfaction scores were seen in mothers with no breast-feeding intention who formula fed from birth, and those with high breast-feeding intention who breastfed for more than 8 weeks. The lowest satisfaction scores were seen in those with high intention scores who only managed to breast feed for less than 3 weeks. This suggests that satisfaction with infant feeding is associated with achieving feeding goals, whether artificial milk or breast feeding. Reasons for stopping breast feeding were broadly similar over time (too demanding, pain, latching, perception of amount of milk, lack of professional support, sibling jealousy). Perseverance appeared to mark out those women who managed to breast feed for longer; this was seen across the socio-economic spectrum. Societal and professional pressure to breast feed was commonly experienced. satisfaction with actual infant feeding practice is associated with antenatal intention; levels are higher for those meeting their goals, whether formula feeding from birth or breast feeding for longer periods. Perceived pressure to breast feed raises questions about informed decision making. Identifying those who will benefit most from targeted infant feeding support is crucial. Copyright © 2012 Elsevier Ltd. All rights reserved.

40 CFR 60.204 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... using the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr... to determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...

40 CFR 60.204 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... using the following equation: P=Mp Rp where: Mp=total mass flow rate of phosphorus-bearing feed, Mg/hr... to determine the mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official...

Infant feeding practices among HIV-exposed infants less than 6 months of age in Bomet County, Kenya: an in-depth qualitative study of feeding choices.

PubMed

Lang'at, Purity Chepkorir; Ogada, Irene; Steenbeek, Audrey; MacDonald, Noni E; Ochola, Sophie; Bor, Wesley; Odinga, Godfrey

2018-05-01

In children, HIV can be acquired from the mother during pregnancy, delivery and through breast milk. The WHO recommends exclusive breast feeding or exclusive replacement feeding for the first 6 months after birth for HIV-exposed infants. Barriers such as HIV-related stigma, inadequate resources, lack of access to safe water and negative cultural beliefs have been shown to influence infant feeding among HIV-exposed infants in some settings. In Kenya, there is limited literature on the barriers. The purpose of this study was to identify barriers to optimal feeding among HIV-exposed infants 0-5 months of age attending a mission hospital in Bomet County, Kenya. A cross-sectional qualitative study was conducted at a referral mission hospital in Bomet County, Southwest Kenya. Four focused group discussions were conducted among mothers/caregivers of HIV-exposed infants aged 0-5 months in accordance with their infant feeding practices, while two key informant interviews were also held with healthcare workers. All sessions were audio recorded and later transcribed verbatim. Content analysis was performed, and conclusions were made based on identified themes. Factors influencing the infant feeding choices were: financial constraints, cultural beliefs and practices, HIV-related stigma and conflicting knowledge among mothers/caregivers and healthcare workers on the recommendations for feeding HIV-exposed infants 0-5 months of age. Health worker retraining in and reinforcement of WHO guidance on feeding HIV exposed/infected infants will clarify misconceptions around feeding HIV exposed/infected infants, though there remain social and economic barriers to full implementation. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Powder Flux Regulation in the Laser Material Deposition Process

NASA Astrophysics Data System (ADS)

Arrizubieta, Jon Iñaki; Wegener, Maximiliam; Arntz, Kristian; Lamikiz, Aitzol; Ruiz, Jose Exequiel

In the present research work a powder flux regulation system has been designed, developed and validated with the aim of improving the Laser Material Deposition (LMD) process. In this process, the amount of deposited material per substrate surface unit area depends on the real feed rate of the nozzle. Therefore, a regulation system based on a solenoid valve has been installed at the nozzle entrance in order to control the powder flux. The powder flux control has been performed based on the machine real feed rate, which is compared with the programmed feed rate. An instantaneous velocity error is calculated and the powder flow is controlled as a function of this variation using Pulse Width Modulation (PWM) signals. Thereby, in zones where the Laser Material Deposition machine reduces the feed rate due to a trajectory change, powder accumulation can be avoided and the generated clads would present a homogeneous shape.

The influence of different levels of micronized insoluble fiber on broiler performance and litter moisture.

PubMed

Rezaei, M; Karimi Torshizi, M A; Rouzbehan, Y

2011-09-01

The effects of different levels of micronized insoluble fiber (MIF) on broiler performance and litter moisture were assessed in 320 one-day-old male broilers (Ross 308). Feed was supplemented with 0, 0.3, 0.4, or 0.5% MIF during both the starter (1 to 14 d) and grower (15 to 42 d) periods. Supplementation of MIF was associated with dose dependent increases in daily BW gain and feed conversion ratio throughout the experimental period (P < 0.01), whereas feed intake was not influenced by MIF concentration. As MIF content increased, the relative weight of digestive organs was not changed (P > 0.05). Supplementation of MIF resulted in dose dependent increases in the ileal villus height:crypt depth ratio and number of goblet cells (P < 0.05), and a dose dependent decrease in litter moisture beginning during the third week (P < 0.01). These findings indicate that inclusion of 0.5% MIF in feed resulted in the greatest improvements in broiler performance, intestinal morphology, and litter moisture.

Breast-feeding initiation and exclusive breast-feeding in rural Vietnam.

PubMed

Duong, Dat V; Binns, Colin W; Lee, Andy H

2004-09-01

To investigate the initiation of breast-feeding and exclusive breast-feeding within the first week after delivery for women in rural Vietnam. An interviewer-administered survey was conducted on a sample of rural women who gave birth during August-October 2002. Quang Xuong District, Thanh Hoa Province of Vietnam. Four hundred and sixty-three women participated in the study, of whom 181 delivered at the district hospital (39.1%), 229 at a commune health centre (49.5%) and 53 at home attended by a traditional birth attendant (11.4%). Although the initiation and exclusive breast-feeding rates were relatively high at 98.3% and 83.6% respectively, the premature introduction of complementary food was a great concern. Logistic regression analysis showed that, together with socio-cultural determinants such as feeding preferences of the husband and maternal grandmother, feeding practices of friends, factors relating to delivery methods, delivery locations and health problems could influence the initiation rate and breast-feeding patterns. To promote breast-feeding practices of rural mothers, health education on breast-feeding should take into account local socio-cultural features in addition to improving the counselling skills of health workers.

Operando μ-Raman study of the actual water content of perfluorosulfonic acid membranes in the fuel cell

NASA Astrophysics Data System (ADS)

Peng, Zhe; Badets, Vasilica; Huguet, Patrice; Morin, Arnaud; Schott, Pascal; Tran, Thi Bich Hue; Porozhnyy, Mikhaël; Nikonenko, Victor; Deabate, Stefano

2017-07-01

Operando μ-Raman spectroscopy is used to probe the water distribution across Nafion® and Aquivion™ membranes in the operating fuel cell. The through-plane water concentration profile is obtained with μm resolution at the middle of the active surface, both at the gas distribution channel and at the under-lands areas. Depth-resolved measurements carried out at room temperature show that the water content of both membranes increases with the increase of the feed gas relative humidity and decreases with the increase of stoichiometry. At given relative humidity and stoichiometry conditions, the water content first increases at the fuel cell start-up and, then, decreases progressively with the increase of the current density delivered by the cell. The water loss is due to the concomitant rise of pressure drops and of the cell inner temperature, the latter giving the larger contribution. Pressure drops are related to the increase of the feed gases fluxes while temperature rise is due to increasing ohmic losses and heat from the electrochemical reaction. Compared to Nafion, Aquivion exhibits larger water content, but similar dehydration rate as a function of ohmic losses, and larger water accumulation at the under-lands area compared to channel.

Effect of The Phytase Enzyme Addition in The Artificial Feed on Digestibility of Feed, Feed Conversion Ratio and Growth of Gift Tilapia Saline Fish (Oreochromis niloticus) Nursery Stadia I

NASA Astrophysics Data System (ADS)

Rachmawati, Diana; Samidjan, Istiyanto; Elfitasari, Tita

2018-02-01

The purpose of this study was to determine the effect of adding the phytase enzyme in the artificial feed on digestibility of feed, feed conversion ratio and growth of gift tilapia saline fish (Oreochromis niloticus) nursery stadia I. The fish samples in this study used gift tilapia saline fish (O. niloticus) with an average weight of 0,62 ± 0,008 g/fish and the stocking density of 1 fish1 L. Experimental method used in this study was completely randomized design with 4 treatments and 3 repetitions. The treatments were by adding phytase enzyme in artificial feed with the different level of doses those were A (0 FTU kg1 feed), B (500 FTU kg1 feed), C (1000 FTU kg1 feed) and D (1500 FTU kg1 feed). The results show that the addition of phytase enzyme was significantly (P<0.01) affected on apparent digestibility coefficient of protein (ADCP), apparent digestibility coefficient of Phospor (ADCF), feed conversion ratio (FCR), protein efficiency ratio (PER), and relative growth rate (RGR), on the other hand it insignificantly (P>0.05) affected on Survival Rate (SR) of gift tilapia saline fish. The optimum doses of phytase enzyme on RGR, FCR, PER, ADCP and ADCF of gift tilapia saline fish ranged from 1060 to 1100 FTU kg-1 feed.

Predictors of breast-feeding in a developing country: results of a prospective cohort study.

PubMed

Al-Sahab, Ban; Tamim, Hala; Mumtaz, Ghina; Khawaja, Marwan; Khogali, Mustafa; Afifi, Rima; Nassif, Yolla; Yunis, Khalid A

2008-12-01

Data on the prevalence and predictors of breast-feeding remain scarce in Lebanon. Moreover, no study has previously addressed the effect of the paediatrician's sex on breast-feeding. The present study aimed to assess the prevalence and predictors of breast-feeding at 1 and 4 months of infant age while exploring the potential role of the sex of the paediatrician. Prospective cohort study. Predictors of breast-feeding significant at the bivariate level were tested at 1 and 4 months through two stepwise regression models. Infants were enrolled through the clinics and dispensaries of 117 paediatricians located in Beirut, Lebanon, and its suburbs. A total of 1,320 healthy newborn infants born between August 2001 and February 2002 were prospectively followed during the first year. Breast-feeding rates at 1 and 4 months were 56.3 % and 24.7 %, respectively. Early discharge, high parity and religion were significantly associated with higher breast-feeding rates at 1 and 4 months of age. Maternal age proved significant only at 1 month, while maternal working status and sex of the paediatrician were significant at 4 months. A novel finding of our study was the positive effect of female paediatricians on breast-feeding continuation until 4 months of age (OR = 1.49; 95 % CI 1.03, 2.15). Breast-feeding rates are low at 1 and 4 months of infant age in Beirut. Further research to investigate the interactions between female physicians and lactating mothers in maintaining breast-feeding in other populations is warranted. The results constitute the basis for designing interventions targeting policy makers, health professionals and mothers.

Influence of methanol/sorbitol co-feeding rate on pAOX1 induction in a Pichia pastoris Mut+ strain in bioreactor with limited oxygen transfer rate.

PubMed

Carly, F; Niu, H; Delvigne, F; Fickers, P

2016-04-01

High Pichia pastoris biomass density could be obtained using high co-feeding rate of methanol and sorbitol in a fed-batch or continuous culture, while further higher feeding rate finally leads to oxygen limitation in bioreactor. In the literature, there is lack of report about AOX1 promoter regulation with regard to dissolved oxygen level (DO). Therefore, in this work, chemostat cultures were performed to investigate the cell growth, metabolism and regulation of the AOX1 promoter (pAOX1) regarding co-feeding rate of optimized methanol/sorbitol mixture (methanol fraction 0.60 C-mol/C-mol) using a P. pastoris Mut+/pAOX1-lacZ strain. The oxygen transfer rates (OTR) in bioreactor were kept in the range of typical values of large bioreactor, i.e., 4-8 g/(L h) if DO equals 30 % saturation or 5-10 g/(L h) if DO nears zero. For DO >0, an increase of the carbon fed led to an increase of pAOX1 induction. By contrast, when dissolved oxygen was completely depleted, methanol accumulated, causing a 30 % decrease of pAOX1 induction. However, this decrease is more likely to be lined to methanol accumulation than to low level of dissolved oxygen (<4 % DO). Methanol/sorbitol co-feeding allowed cells to adapt to oxygen transient limitations that often occur at industrial scale with reduced effect on pAOX1 induction. The optimal feeding rate tested here was 6.6 mmol C (DCW h)(-1) at an OTR of 8.28 g O2(L h)(-1) with over fivefold pAOX1 induction (probably directly associated with target protein productivity) compared with previous work.

Characteristics of lipids and their feeding value in swine diets

USDA-ARS?s Scientific Manuscript database

In livestock diets, energy is one of the most expensive nutritional components of feed formulation. Because lipids are a concentrated energy source, inclusion of lipids are known to affect growth rate and feed efficiency, but are also known to affect diet palatability, feed dustiness, and pellet qua...

Feeding, evaluating, and controlling rumen function.

PubMed

Lean, Ian J; Golder, Helen M; Hall, Mary Beth

2014-11-01

Achieving optimal rumen function requires an understanding of feeds and systems of nutritional evaluation. Key influences on optimal function include achieving good dry matter intake. The function of feeds in the rumen depends on other factors including chemical composition, rate of passage, degradation rate of the feed, availability of other substrates and cofactors, and individual animal variation. This article discusses carbohydrate, protein, and fat metabolism in the rumen, and provides practical means of evaluation of rations in the field. Conditions under which rumen function is suboptimal (ie, acidosis and bloat) are discussed, and methods for control examined. Copyright © 2014 Elsevier Inc. All rights reserved.

21 CFR 558.305 - Laidlomycin.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Echerichia coli and bacterial pneumonia caused by Pasteurella multocida organisms susceptible to... improved feed efficiency and increased rate of weight gain; and for control of bacterial pneumonia... pneumonia caused by P. multocida organisms susceptible to chlortetracycline. Feed continuously at a rate of...

21 CFR 558.305 - Laidlomycin.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Echerichia coli and bacterial pneumonia caused by Pasteurella multocida organisms susceptible to... improved feed efficiency and increased rate of weight gain; and for control of bacterial pneumonia... pneumonia caused by P. multocida organisms susceptible to chlortetracycline. Feed continuously at a rate of...

21 CFR 558.305 - Laidlomycin.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Echerichia coli and bacterial pneumonia caused by Pasteurella multocida organisms susceptible to... improved feed efficiency and increased rate of weight gain; and for control of bacterial pneumonia... pneumonia caused by P. multocida organisms susceptible to chlortetracycline. Feed continuously at a rate of...

40 CFR 60.234 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... equation: P = Mp Rp where: Mp total mass flow rate of phosphorus-bearing feed, Mg/hr (ton/hr). Rp=P2O5... mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official Analytical...

40 CFR 60.234 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... equation: P = Mp Rp where: Mp total mass flow rate of phosphorus-bearing feed, Mg/hr (ton/hr). Rp=P2O5... mass flow rate (Mp) of the phosphorus-bearing feed. (ii) The Association of Official Analytical...

Correction Factor for Determining the London Penetration Depth from Strip Resonators

NASA Technical Reports Server (NTRS)

Romanofsky, Robert R.

1995-01-01

A significant disagreement is often seen between the theoretical temperature dependent magnetic penetration depth profile and experimentally derived calculations based on stripline type resonators. This short paper shows that the disagreement can be attributed to the susceptance coupled into the resonator from the gap discontinuity as well as the feed line. When the effect is taken into account, the natural resonant frequency of the resonator is increased, and the frequency shift due to kinetic inductance can be calculated much more accurately. While it is necessary to include this effect to determine the penetration depth, it is shown that the impact on unloaded quality factor is generally negligible. The situation when the strip characteristic impedance is not matched to the generator is included.

Exploring infant feeding practices: cross-sectional surveys of South Western Sydney, Singapore, and Ho Chi Minh City.

PubMed

Leow, Timothy Yong Qun; Ung, Andrew; Qian, Shelley; Nguyen, Jessie Thanh; An, Yvonne; Mudgil, Poonam; Whitehall, John

2017-06-13

Infant feeding practices are known to influence the child's long-term health. Studies have associated obesity and other diseases with reduced breastfeeding and early introduction of high calorie beverages (HCBs). The rising prevalence of obesity is already a problem in most developed countries, especially Australia, but cultural differences are influential. Our aim is to examine and compare infant feeding practices and educational levels of respondents through questionnaires in three culturally different sites: Campbelltown (South Western Sydney), Australia, Singapore and Ho Chi Minh City, Vietnam (HCMC). Consenting parents and carers (aged ≥18 years old) of at least one child (≤6 years old) were recruited from paediatric clinics in Campbelltown, Singapore and HCMC. Participants completed an infant feeding practices questionnaire regarding breastfeeding, beverage and solid initiation in addition to the parent's ethnicity, age, and educational level. Data was analysed quantitatively using SPSS. Two hundred eighty-three participants were recruited across the three sites, HCMC (n = 84), Campbelltown (n = 108), and Singapore (n = 91). 237 (82.6%) children were breastfed but in all only 100 (60.2%) were exclusively breastfed for five months or more. There was a statistical difference in rates of breast feeding between each region. HCMC (n = 18, 21.4%) had the lowest, followed by Campbelltown (n = 35, 32.4%), and then Singapore (n = 47, 51.7%). There was also a difference in rates of introduction of HCBs by 3 years of age, with those in HCMC (n = 71, 84.5%) were higher than Campbelltown (n = 71, 65.8%) and Singapore (n = 48, 52.8%). The educational level of respondents was lower in Vietnam where only 46.4% (n = 39) had completed post-secondary education, compared to 75.0% (n = 81) in Campbelltown and 75.8% (n = 69) in Singapore. Rates of breast feeding were inversely correlated with rates of introduction of HCB and positively related to educational achievement. Vietnam had lowest rates of breast feeding, higher rates of introduction of HCBs, and lower rates of education. Given rising rates of obesity, there is a need for more effective programmes to promote breast feeding and restrict false advertising of HCBs.

Evolution of the magma feeding system during a Plinian eruption: The case of Pomici di Avellino eruption of Somma-Vesuvius, Italy

NASA Astrophysics Data System (ADS)

Massaro, S.; Costa, A.; Sulpizio, R.

2018-01-01

The current paradigm for volcanic eruptions is that magma erupts from a deep magma reservoir through a volcanic conduit, typically modelled with fixed rigid geometries such as cylinders. This simplistic view of a volcanic eruption does not account for the complex dynamics that usually characterise a large explosive event. Numerical simulations of magma flow in a conduit combined with volcanological and geological data, allow for the first description of a physics-based model of the feeding system evolution during a sustained phase of an explosive eruption. The method was applied to the Plinian phase of the Pomici di Avellino eruption (PdA, 3945 ±10 cal yr BP) from Somma-Vesuvius (Italy). Information available from volcanology, petrology, and lithology studies was used as input data and as constraints for the model. In particular, Mass Discharge Rates (MDRs) assessed from volcanological methods were used as target values for numerical simulations. The model solutions, which are non-unique, were constrained using geological and volcanological data, such as volume estimates and types of lithic components in the fall deposits. Three stable geometric configurations of the feeding system (described assuming elliptical cross-section of variable dimensions) were assessed for the Eruptive Units 2 and 3 (EU2, EU3), which form the magmatic Plinian phase of PdA eruption. They describe the conduit system geometry at time of deposition of EU2 base, EU2 top, and EU3. A 7-km deep dyke (length 2 a = 200-4 00 m, width 2 b = 10- 12 m), connecting the magma chamber to the surface, characterised the feeding system at the onset of the Plinian phase (EU2 base). The feeding system rapidly evolved into hybrid geometric configuration, with a deeper dyke (length 2 a = 600- 800 m, width 2 b = 50 m) and a shallower cylindrical conduit (diameter D = 50 m, dyke-to-cylinder transition depth ∼2100 m), during the eruption of the EU2 top. The deeper dyke reached the dimensions of 2 a = 2000 m and 2 b = 60 m at EU3 peak MDR, when the shallower cylinder had enlarged to a diameter of 60 m and a transition depth of 3000 m. The changes in feeding system geometry indicate a partitioning of the driving pressure of the eruption, which affected both magma movement to the surface and dyke growth. This implies that a significant portion of the magma injected from the magma chamber filled the enlarging dyke before it erupted to the surface. In this model, the lower dyke acted as a sort of magma "capacitor" in which the magma was stored briefly before accelerating to the cylindrical conduit and erupting. The capacitor effect of the lower dyke implies longer times of transit for the erupting magma, which also underwent several steps of decompression. On the other hand, the decompression of magma within the capacitor provided the driving pressure to maintain the flow into the upper cylindrical conduit, even as the base of the dyke started to close due to the drop in driving pressure from progressive emptying of the magma chamber. The shallower cylindrical conduit was shaped through the erosion of conduit wall rocks at and above the fragmentation level. Using the lithic volume and duration of EU3, the erosion rate of shallower cylindrical conduit was calculated at ∼5 × 103 m3/s. The outcomes of this work represent an important baseline for further petrologic and geophysical studies devoted to the comprehension of processes driving volcanic eruptions.

CHIP MORPHOLOGY AND HOLE SURFACE TEXTURE IN THE DRILLING OF CAST ALUMINUM ALLOYS. (R825370C057)

EPA Science Inventory

The effects of cutting fluid and other process variables on chip morphology when drilling cast aluminium alloys are investigated. The effects of workpiece material, speed, feed, hole depth, cutting-fluid presence and percentage oil concentration, workpiece temperature, drill t...

Child-Rearing Practices of Two Generations of Punjabi Parents.

ERIC Educational Resources Information Center

Dosnajh, J. S.; Ghuman, P. A. S.

1997-01-01

Studied contrasts in child-rearing practices between two generations of Punjabi parents living in England, and between Punjabis and white parents. Collected data on topics such as breast-feeding, cot deaths, and father participation, through in-depth interviews of the first generation (1970) and second generation (1995). Found second-generation…

Hydrodynamic Constraints of Suction Feeding in Low Reynolds Numbers, and the Critical Period of Larval Fishes.

PubMed

Holzman, Roi; China, Victor; Yaniv, Sarit; Zilka, Miri

2015-07-01

Larval fishes suffer prodigious mortality rates, eliminating 99% of the cohort within a few days after their first feeding. Hjort (1914) famously attributed this "critical period" of low survival to larval inability to obtain sufficient food. We discuss recent experimental and modeling work, suggesting that the viscous hydrodynamic regime have marked effects on the mechanism of suction feeding in larval fish. As larvae grow, the size of the gape and associated volume of the mouth increase. At the same time, larvae swim faster and can generate faster suction flows, thus transiting to a hydrodynamic regime of higher Reynolds numbers. This hydrodynamic regime further leads to changes in the spatio-temporal patterns of flow in front of the mouth, and an increasing ability in larger larvae to exert suction forces on the prey. Simultaneously, the increase in swimming speed and the distance from which the prey is attacked result in higher rates of encountering prey by larger (older) larvae. In contrast, during the first few days after feeding commence the lower rates of encounter and success in feeding translate to low feeding rates. We conclude that young larvae experience "hydrodynamic starvation," in which low Reynolds numbers mechanically limit their feeding performance even under high densities of prey. © The Author 2015. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.

Does frenotomy improve breast-feeding difficulties in infants with ankyloglossia?

PubMed

Ito, Yasuo

2014-08-01

The aim of this systematic review was to critically examine the existing literature regarding the effectiveness of tongue-tie division in infants with ankyloglossia, using the new grades of recommendations, assessment, development, and evaluation (GRADE) rating system. A clinical question was structured according to patient, intervention, comparison, and outcome, as follows: in infants with poor breast-feeding and ankyloglossia (patient), does frenotomy (intervention), compared to lactation support alone (comparison), improve feeding (outcome)? An electronic literature search was systematically conducted from databases including PubMed, Japana Centra Revuo Medicina (Igaku Chuo Zasshi), CINAHL, and Cochrane Library using the key words "ankyloglossia," "tongue-tie," "frenotomy," and/or "breast-feeding" in English and equivalent terms in Japanese. The literature search yielded four randomized clinical trials, and 12 observational studies for analysis. The quality of the literature was rated in regard to the two most important outcomes (sucking/latching, and nipple pain) and five less important outcomes (milk supply/milk production, continuation of breast-feeding, weight gain, adverse events, and dyad distress) in accordance with the GRADE system. Evidence levels of the most important outcomes were rated either A (strong evidence) or B (moderate evidence), and less important outcomes were rated C (weak evidence); every outcome consistently showed a favorable effect of frenotomy on breast-feeding. The literature review supported an overall moderate quality of evidence for the effectiveness of frenotomy for the treatment of breast-feeding difficulties in infants with ankyloglossia. No major complications from frenotomy were reported. © 2014 Japan Pediatric Society.

Effects of pre-feeding oral stimulation on oral feeding in preterm infants: a randomized clinical trial.

PubMed

Bache, Manon; Pizon, Emmanuelle; Jacobs, Julien; Vaillant, Michel; Lecomte, Aline

2014-03-01

To evaluate the effect of early oral stimulation before the introduction of oral feeding, over the duration of concomitant tube feeding ("transition period"), the length of hospital stay and the breastfeeding rates upon discharge in preterm infants. Preterm infants born between 26 and 33 weeks gestational age (n=86), were randomized into an intervention and control group. Infants in the intervention group received an oral stimulation program consisting in stimulation of the oral structures for 15 min at least for 10 days, before introduction of oral feeding. Oral feeding was introduced at 34 weeks GA in both groups. Breastfeeding rates upon discharge were significantly higher in the intervention than in the control group (70% versus 45.6%, p=0.02). There was no statistical difference between the two groups in terms of the length of the transition period or the length of the hospital stay. The need for prolonged CPAP support (HR=0.937, p=0.030) and small size for gestational age at birth (HR=0.338, p=0.016) were shown to be risk factors for a prolonged transition period. A pre-feeding oral stimulation program improves breastfeeding rates in preterm infants. The study results suggest that oral stimulation, as used in our specific population, does not shorten the transition period to full oral feeding neither the length of hospital stay. Copyright © 2014 Elsevier Ltd. All rights reserved.

How the food supply harvestable by waders in the Wadden Sea depends on the variation in energy density, body weight, biomass, burying depth and behaviour of tidal-flat invertebrates

NASA Astrophysics Data System (ADS)

Zwarts, Leo; Wanink, Jan H.

For several reasons, waders in the Wadden Sea face a large seasonal and annual variation in their food supply. Observations on a tidal flat in the Dutch Wadden Sea have shown that: - (1) The average energy density of ten invertebrate prey species varies between 21 and 23 kJ·g -1 AFDW. In Scrobicularia plana and Mya arenaria, but not in Macoma balthica, the energy density is 10% lower in winter than in summer. - (2) Depending on the species, body weights of prey of similar size are 30 to 60% lower in winter than in summer. - (3) The year-to-year fluctuation in standing-crop biomass is larger in some species than in others, the difference depending mainly on the frequency of successful recruitment. The overall biomass of the macrobenthos in winter is half of that in summer, but the timing of the peak biomass differs per species. - (4) The burying depth varies per species: Cerastoderma edule live just beneath the surface, while M. balthica, S. plana, M. arenaria, Arenicola marina and Nereis diversicolor bury more deeply and the majority of these prey live out of reach of the bird's bill. In all six species, burying depth increases with size. There is no seasonal variation in depth of C. edule and M. arenaria, but the four other species live at most shallow depth in early summer and most deeply in midwinter. Burying depths in winter vary from year to year, but are unrelated to temperature. Neither has temperature any effect on depth within months. For knot Calidris canutus feeding on M. balthica, the fluctuation in the accessible fraction was the main source of variation in the biomass of prey that is actually harvestable, i.e. the biomass of prey of suitable size that is accessible. Accordingly, the paper reviews the available data on the temporal variations in accessibility, detectability, ingestibility, digestibility and profitability of prey for waders. Only a small part of the prey is harvestable since many accessible prey are ignored because of their low profitability, while many profitable prey are inaccessible. The profitability of prey depends on their size and weight but also on their depth in the mud, since handling time increases with burying depth. A simple biomechanical rule explains why the handling time of small prey increases with bill length and why large, long-billed waders ignore a disproportionately larger part of the small prey. The fraction detectable for visually feeding waders is usually very low, especially when the temperature of the substrate is below 3-6°C. Waders vary their prey choice over the year in response to the changes in the availability and profitability of their different prey species. The food supply harvestable by waders is much lower in winter than in summer. For waders wintering in the Wadden Sea, the food supply may be characterized as unpredictable and usually meagre. Waders wintering in NW Europe are concentrated in coastal sites where the average surface temperature is above 3°C. This probably cannot be explained by a greater burying depth, and only partly by a lower body condition, of prey in colder areas. Yet the harvestable fraction is lower in colder sites, especially for sight-feeding waders, as invertebrates are less active at low temperatures. However, the lower energetic cost of living and reduced chances of the prey being covered by ice may also contribute to the waders' preference for warmer sites.

Stable C and N isotopic composition of cold-water corals from the Newfoundland and Labrador continental slope: Examination of trophic, depth and spatial effects

NASA Astrophysics Data System (ADS)

Sherwood, Owen A.; Jamieson, Robyn E.; Edinger, Evan N.; Wareham, Vonda E.

2008-10-01

With the aim of understanding of the trophic ecology of cold-water corals, this paper explores the tissue δ13C and δ15N values of 11 'coral' species (8 alcyonacean, 1 antipatharian, 1 pennatulacean, 1 scleractinian) collected along the Newfoundland and Labrador continental slope. Isotopic results delimit species along continua of trophic level and food lability. With an isotopic signature similar to macrozooplankton, Paragorgia arborea occupies the lowest trophic level and most likely feeds on fresh phytodetritus. Primnoa resedaeformis occupies a slightly higher trophic level, likely supplementing its diet with microzooplankton. Bathypathes arctica, Pennatulacea and other alcyonaceans ( Acanella arbuscula, Acanthogorgia armata, Anthomastus grandiflorus, Duva florida, Keratoisis ornata, Paramuricea sp.) had higher δ13C and δ15N values, suggesting these species feed at higher trophic levels and on a greater proportion of more degraded POM. Flabellum alabastrum had an isotopic signature similar to that of snow crab, indicating a primarily carnivorous diet. Isotopic composition did not vary significantly over a depth gradient of 50-1400 m. Coral δ13C increased slightly (<1‰) from the Hudson Strait to the southern Grand Banks, but δ15N did not. By modulating the availability and quality of suspended foods, substrate likely exerts a primary influence on the feeding habits of cold-water corals.

Effect of High Dietary Tryptophan on Intestinal Morphology and Tight Junction Protein of Weaned Pig.

PubMed

Tossou, Myrlene Carine B; Liu, Hongnan; Bai, Miaomiao; Chen, Shuai; Cai, Yinghua; Duraipandiyan, Veeramuthu; Liu, Hongbin; Adebowale, Tolulope O; Al-Dhabi, Naif Abdullah; Long, Lina; Tarique, Hussain; Oso, Abimbola O; Liu, Gang; Yin, Yulong

2016-01-01

Tryptophan (Trp) plays an essential role in pig behavior and growth performances. However, little is known about Trp's effects on tight junction barrier and intestinal health in weaned pigs. In the present study, twenty-four (24) weaned pigs were randomly assigned to one of the three treatments with 8 piglets/treatments. The piglets were fed different amounts of L-tryptophan (L-Trp) as follows: 0.0%, 0.15, and 0.75%, respectively, named zero Trp (ZTS), low Trp (LTS), and high Trp (HTS), respectively. No significant differences were observed in average daily gain (ADG), average daily feed intake (ADFI), and gain: feed (G/F) ratio between the groups. After 21 days of the feeding trial, results showed that dietary Trp significantly increased (P < 0.05) crypt depth and significantly decreased (P < 0.05) villus height to crypt depth ratio (VH/CD) in the jejunum of pig fed HTS. In addition, pig fed HTS had higher (P < 0.05) serum diamine oxidase (DAO) and D-lactate. Furthermore, pig fed HTS significantly decreased mRNA expression of tight junction proteins occludin and ZO-1 but not claudin-1 in the jejunum. The number of intraepithelial lymphocytes and goblet cells were not significantly different (P > 0.05) between the groups. Collectively, these data suggest that dietary Trp supplementation at a certain level (0.75%) may negatively affect the small intestinal structure in weaned pig.

Does small-scale vertical distribution of juvenile schooling fish affect prey availability to surface-feeding seabirds in the Wadden Sea?

NASA Astrophysics Data System (ADS)

Dänhardt, Andreas; Becker, Peter H.

2011-02-01

Food availability is a key variable influencing breeding performance and demography of marine top predators. Due to methodological problems, proportionality between fish abundance and availability is often assumed without being explicitly tested. More specifically, better breeding performance of surface-feeding seabirds at times of large prey stocks suggests that prey availability is also a function of prey abundance. Using vertically resolved stow net sampling we tested whether local abundance and length composition of pelagic fish are reliable predictors of the availability of these fish to surface-feeding Common Terns ( Sterna hirundo) breeding in the German Wadden Sea. Prey fish were found to concentrate below the maximum diving depth of the terns. Individuals caught close to the surface were in most cases smaller than conspecifics caught at greater depth. Correlations between fish abundance within and out of reach of the terns appeared to be both species- and site-specific rather than driven by overall fish abundance. Vertical distribution patterns of the terns' main prey fish could be explained as anti-predator behavior, reducing prey availability to the terns. In 2007, when breeding performance was much better than in 2006, herring and whiting were much more abundant, suggesting that overall prey abundance may also increase prey availability in habitats other than those represented by the stow net sampling.

Breast-feeding difficulties experienced by women taking part in a qualitative interview study of postnatal depression.

PubMed

Shakespeare, Judy; Blake, Fiona; Garcia, Jo

2004-09-01

to explore how women experience breast-feeding difficulties. This theme emerged unexpectedly during a study of women's experiences of screening with the Edinburgh postnatal depression scale (EPDS) and subsequent care from primary health-care professionals. qualitative in-depth interview study. postnatal women of 22 general practices within Oxford City Primary Care Group area. 39 postnatal women from a purposeful sample were interviewed at an average of 15 months postnatal. They were chosen from different general practices and with a range of emotional difficulties after birth, judged using EPDS results at eight weeks and eight months postnatal, and whether they received 'listening visits' from health visitors. a qualitative thematic analysis was used, including searches for anticipated and emergent themes. Fifteen women had breast-feeding difficulties. Five themes emerged which explore the difficulties. Firstly, commitment to breast feeding and high expectations of success; secondly, unexpected difficulties; thirdly, seeking professional support for difficulties; fourthly, finding a way to cope; and fifthly, guilt. in this study breast-feeding difficulties were common, caused emotional distress and interactions with professionals could be difficult. Current breast-feeding policy, such as the 'Baby Friendly Initiative', may be a contributing factor. This needs to be explored in a further study.

The limits of intensive feeding: maternal foodwork at the intersections of race, class, and gender.

PubMed

Brenton, Joslyn

2017-07-01

Despite experiencing numerous barriers, mothers today confront increasing social pressure to embody perfection through their foodwork. A growing body of social science research identifies how gender and class inequality shape women's perceptions of food and their feeding strategies, but this research is thus far limited in its understanding of the roles that race and ethnic identity play in a mother's food landscape. Drawing on 60 in-depth interviews with a racially and economically diverse group of mothers, this paper examines how feeding young children is intertwined with contemporary ideas about child health as well as women's efforts to negotiate race, class, and gender hierarchies. Extending Hays' concept of intensive mothering, rich descriptions of feeding children reveal how mothers in this study are discursively engaged with what I call an 'intensive feeding ideology' - the widespread belief that good mothering is synonymous with intensive food labour. Drawing on intersectional theory, this article discusses the limits of an intensive feeding ideology, particularly for poor and middle-class mothers of colour. The findings contribute to an understanding of how power relations are embedded within food ideologies and how mothers of young children attempt to negotiate them. © 2017 Foundation for the Sociology of Health & Illness.

Infant feeding practices among HIV-positive mothers at Tembisa hospital, South Africa.

PubMed

Chaponda, Armelia; Goon, Daniel T; Hoque, Muhammad E

2017-07-27

Despite the nutritional, physiological and emotional benefits of breastfeeding, HIV-positive mothers cannot practise exclusive breastfeeding for six months because of a range of influences on their feeding choice - thereby creating a caveat for morbidity in infants. This study explored factors influencing the infant feeding choice of HIV-positive mothers at a peri-urban hospital in Tembisa, South Africa. This study was qualitative and was conducted among 30 purposefully selected postnatal HIV-positive mothers at Tembisa hospital, Gauteng, from May to June 2011. In-depth interviews were conducted mainly in isiZulu and Sepedi which were then transcribed into English. An open coding system of analysis was used for thematic analysis. Nurses significantly influenced the feeding choices of new mothers - sometimes with inconsistent information. The grandmothers of infants also influenced the new mothers' feeding options, in some cases with the new mother coming under duress. Other relatives like the sisters and aunts of mothers appeared to significantly affect feeding choices. The time frames expressed for the initiation of a supplementary diet were as follows: before 1 month, at 1 month and at 4 months. The main reason was the belief that infants required more than breast milk as sustenance during this period. In the postnatal hospital setting of this study, the feeding choices of mothers were influenced by nursing personnel. Nursing personnel could marry the influential 'authority' they have with correct and consistent information, in order to change feeding behaviour. Significant 'others' like grandmothers and other relatives also influenced decisions on infant feeding. As such, family dynamics need to be considered when encouraging breastfeeding.

The impact of transnational migration on intergenerational transmission of knowledge and practice related to breast feeding.

PubMed

McFadden, Alison; Atkin, Karl; Renfrew, Mary J

2014-04-01

the aim of this study was to explore how migration from Bangladesh to the UK influenced the transmission of knowledge and practice related to breast feeding from one generation to the next. this qualitative study used an ethnographic approach and comprised two focus group discussions with 14 grandmothers who had migrated from Bangladesh to the UK and in-depth interviews with 23 mothers of Bangladeshi origin who had breast fed in the UK within the previous five years. The focus group discussions and 10 of the interviews with mothers were conducted in Sylheti by a bilingual researcher. The study took place in four localities in northern England in 2008. grandmothers and mothers of Bangladeshi origin emphasised the importance of intergenerational transmission of knowledge and practice related to breast feeding. However, migration disrupted this transmission through isolating women from their female kin, exposing them to a society in which breast feeding is mostly hidden and that privileges health professionals as an important source of information about breast feeding. understanding how migration influences the knowledge and advice that grandmothers pass on to younger mothers could help health professionals facilitate family support for breast feeding. Health professionals could start by asking grandmothers about their experiences of breast feeding in their countries of origin and the host country. Where relevant, previous poor professional support for breast feeding should be acknowledged. Health professionals should not underestimate their role in influencing breast feeding decisions of mothers of Bangladeshi origin. Copyright © 2013 Elsevier Ltd. All rights reserved.

Self-reported breast feeding practices and the Baby Friendly Hospital Initiative in Riyadh, Saudi Arabia: prospective cohort study

PubMed Central

Sarkar, Abdullah; Hashem, Alaa AbouBakr; Hamadah, Reem E; Alhoulan, Asma; AlMakadma, Yosra A; Khan, Tehreem A; Al-Hamdani, Abdurahman K; Senok, Abiola

2016-01-01

Background The Baby Friendly Hospital Initiative (BFHI) is a practice guideline for healthcare providers to promote breastfeeding and increase breastfeeding rates. Objective This study aimed to examine reported experiences and views on breastfeeding of women using prenatal and postnatal services, and opinions of staff, in the context of the BFHI programme in Riyadh, Saudi Arabia. Design Prospective cohort study. Setting This prospective, longitudinal study was conducted from December 2013 to September 2015 at two healthcare facilities (BFHI and non-BFHI) in Riyadh Saudi Arabia. Methods Women 36–40 weeks gestation receiving antenatal care at the hospitals were enrolled. Questionnaires were administered prenatally, at 1, 3 and 6 months postnatal and to the administrator and maternity staff. Results We recruited 277 women with an estimated 80% response rate. 156 (BFHI=78/139, non-BFHI=78/138, 56%) participants completed all questionnaires. Most BFHI-hospital participants (77.9%, n=8 for this question) acknowledged seeing the breast feeding policy compared to 23.5% (n=23) at the non-BFHI-hospital (p<0.01). Breast feeding education and encouragement was higher at the BFHI-hospital (93.3%) compared to the non-BFHI-hospital (48.2%; p<0.01). At postpartum discharge, 51% (n=53) of mothers in the BFHI-hospital were breast feeding exclusively versus 29.6% (n=29) at the non-BFHI-hospital. Where formula feed was introduced, women in the BFHI-hospital more often practiced mixed feeding rather than exclusive formula feeding with some switching from mixed feeding to exclusive breast feeding between 3 and 6 months postpartum. Exclusive breast feeding rates declined in both hospitals at 3 and 6 months postpartum with lack of community services for lactation being a major reason. Although BFHI-hospital staff (n=9) were more conversant with BFHI principles, defects in adherence to the BFHI 10 Steps were identified. Conclusions This is the first study assessing the effectiveness of BFHI implementation in Saudi Arabia. Although women reported increased breast feeding rates, we identified important weaknesses that could be improved through strict compliance with BFHI practices. PMID:27986740

Aggression and feeding of hatchery-reared and naturally reared steelhead (Oncorhynchus mykiss) fry in a laboratory flume and a comparison with observations in natural streams

USGS Publications Warehouse

Riley, S.C.; Tatara, C.P.; Scheurer, J.A.

2005-01-01

We quantified the aggression and feeding of naturally reared steelhead (Oncorhynchus mykiss) fry stocked into a laboratory flume with naturally reared fry or hatchery-reared fry from conventional and enriched rearing environments at three densities in the presence and absence of predators, and compared the aggression and feeding observed in the flume to that observed in two streams. Steelhead fry attack rate increased with density and was reduced in the presence of predators, but was not affected by rearing treatment. Threat rate appeared to increase with density and was significantly affected by rearing treatment combination, but was not significantly affected by predator presence. Feeding rate was not affected by density or rearing treatment, but was reduced in the presence of predators. The rate of aggression by steelhead fry in two streams was lower than that observed in the laboratory and did not increase with density. Rates of aggression and feeding of hatchery-reared and wild steelhead fry were not significantly different in the streams. Overall, we found no evidence that hatchery rearing environments caused higher aggression in steelhead fry. Laboratory observations of salmonid aggression, particularly at high density, may not reflect aggression levels in the wild. ?? 2005 NRC.

Variation in the emission rate of sounds in a captive group of false killer whales Pseudorca crassidens during feedings: possible food anticipatory vocal activity?

NASA Astrophysics Data System (ADS)

Platto, Sara; Wang, Ding; Wang, Kexiong

2016-11-01

This study examines whether a group of captive false killer whales ( Pseudorca crassidens ) showed variations in the vocal rate around feeding times. The high level of motivation to express appetitive behaviors in captive animals may lead them to respond with changes of the behavioral activities during the time prior to food deliveries which are referred to as food anticipatory activity. False killer whales at Qingdao Polar Ocean World (Qingdao, China) showed significant variations of the rates of both the total sounds and sound classes (whistles, clicks, and burst pulses) around feedings. Precisely, from the Transition interval that recorded the lowest vocalization rate (3.40 s/m/d), the whales increased their acoustic emissions upon trainers' arrival (13.08 s/m/d). The high rate was maintained or intensified throughout the food delivery (25.12 s/m/d), and then reduced immediately after the animals were fed (9.91 s/m/d). These changes in the false killer whales sound production rates around feeding times supports the hypothesis of the presence of a food anticipatory vocal activity. Although sound rates may not give detailed information regarding referential aspects of the animal communication it might still shed light about the arousal levels of the individuals during different social or environmental conditions. Further experiments should be performed to assess if variations of the time of feeding routines may affect the vocal activity of cetaceans in captivity as well as their welfare.

Interactions between sleeping position and feeding on cardiorespiratory activity in preterm infants.

PubMed

Fifer, William P; Myers, Michael M; Sahni, Rakesh; Ohira-Kist, Kiyoko; Kashyap, Sudha; Stark, Raymond I; Schulze, Karl F

2005-11-01

Infants sleeping in the prone position are at greater risk for sudden infant death syndrome (SIDS). Sleep position-dependent changes in cardiorespiratory activity may contribute to this increased risk. Cardiorespiratory activity is also affected by feeding. Twenty prematurely-born infants were studied at 31-36 weeks postconceptional age while sleeping in the prone and supine positions. Heart rate, respiratory rate, and patterns of variability were recorded during interfeed intervals, and effects of position and time after feeding were analyzed by repeated measures analyses of variance. There were significant effects of both sleeping position and time after feeding. Heart rate is higher and heart period variability is lower in the prone position, and the effects of sleeping position on cardiac functioning are more pronounced during the middle of the intrafeed interval. In preterm infants, autonomic responses to nutrient processing modulate the cardiorespiratory effects of sleeping position. Prone sleeping risk may vary with time after feeding. Copyright 2005 Wiley Periodicals, Inc.

Post-combustion CO2 capture with activated carbons using fixed bed adsorption

NASA Astrophysics Data System (ADS)

Al Mesfer, Mohammed K.; Danish, Mohd; Fahmy, Yasser M.; Rashid, Md. Mamoon

2018-03-01

In the current work, the capturing of carbon dioxide from flue gases of post combustion emission using fixed bed adsorption has been carried out. Two grades of commercial activated carbon (sorbent-1 and sorbent-2) were used as adsorbent. Feed consisting of CO2 and N2 mixture was used for carrying out the adsorption. The influence of bed temperature, feed rate, equilibrium partial pressure and initial % CO2 in feed were considered for analyzing adsorption-desorption process. It was found that the total adsorption-desorption cycle time decreases with increased column temperature and feed rates. The time required to achieve the condition of bed saturation decreases with increased bed temperature and feed rates. The amount of CO2 adsorbed/Kg of the adsorbent declines with increased bed temperature with in studied range for sorbent-1 and sorbent-2. It was suggested that the adsorption capacity of the both the sorbents increases with increased partial pressure of the gas.

Flower tracking in hawkmoths: behavior and energetics.

PubMed

Sprayberry, Jordanna D H; Daniel, Thomas L

2007-01-01

As hovering feeders, hawkmoths cope with flower motions by tracking those motions to maintain contact with the nectary. This study examined the tracking, feeding and energetic performance of Manduca sexta feeding from flowers moving at varied frequencies and in different directions. In general we found that tracking performance decreased as frequency increased; M. sexta tracked flowers moving at 1 Hz best. While feeding rates were highest for stationary flowers, they remained relatively constant for all tested frequencies of flower motion. Calculations of net energy gain showed that energy expenditure to track flowers is minimal compared to energy intake; therefore, patterns of net energy gain mimicked patterns of feeding rate. The direction effects of flower motion were greater than the frequency effects. While M. sexta appeared equally capable of tracking flowers moving in the horizontal and vertical motion axes, they demonstrated poor ability to track flowers moving in the looming axis. Additionally, both feeding rates and net energy gain were lower for looming axis flower motions.

The infant feeding choices and experiences of women living with HIV in Kinshasa, Democratic Republic of Congo.

PubMed

Maman, Suzanne; Cathcart, Rebecca; Burkhardt, Gillian; Omba, Serge; Thompson, Deidre; Behets, Frieda

2012-01-01

HIV transmission through breastfeeding is a significant public health challenge. While breastfeeding provides important nutrition, and results in reduced morbidity and mortality, there is a risk of HIV transmission through breastfeeding. International prevention of mother-to-child transmission (PMTCT) guidelines recommend exclusive breastfeeding for six months among HIV-infected women on antiretroviral therapy. Promoting exclusive feeding has proved difficult in settings where mixed feeding is a cultural norm. Understanding the factors that influence HIV infected women's infant feeding choices and practices is critical to promoting adherence to PMTCT guidelines. We conducted in-depth interviews with 40 HIV+ pregnant and post-partum women in Kinshasa, Democratic Republic of Congo to understand their infant feeding experiences. Interviews were conducted in Lingala, and transcribed and translated into French for analysis. Deductive and inductive codes were applied, and matrices were created to facilitate cross-case analysis. Women had limited understanding of the specific mechanisms through which their infant feeding practices influenced HIV transmission risk. Clinical staff was the primary source of women's knowledge of HIV mother-to-child-transmission. Among the 24 post-partum women in the sample, seven women adhered to exclusive breastfeeding and two women to exclusive formula feeding for at least six months. Women's beliefs and awareness about HIV transmission through breastfeeding, as well as the information and support from clinical staff and other members of their support networks positively influenced their exclusive feeding. Common barriers to exclusive feeding included financial constraints, breast health problems, misinformation about HIV transmission, local norms, and prior feeding experiences. Health care workers play a key role in providing correct information on PMTCT and supporting women's infant feeding choices to adhere to guidelines of exclusive infant feeding. Optimizing provider-patient communication and creating a supportive environment surrounding infant feeding is critical.

Council tax valuation band predicts breast feeding and socio-economic status in the ALSPAC study population

PubMed Central

Beale, Norman; Kane, Gill; Gwynne, Mark; Peart, Carole; Taylor, Gordon; Herrick, David; Boyd, Andy

2006-01-01

Background Breast-feeding rates in the UK are known to vary by maternal socio-economic status but the latter function is imperfectly defined. We test if CTVB (Council Tax Valuation Band – a categorical assessment of UK property values and amenities governing local tax levies) of maternal address predicts, in a large UK regional sample of births, (a) breast-feeding (b) personal and socio-economic attributes of the mothers. Methods Retrospective study of a subset (n.1390 selected at random) of the ALSPAC sample (Avon Longitudinal Study of Parents and Children), a large, geographically defined cohort of mothers followed from early pregnancy to 8 weeks post-delivery. Outcome measures are attitudes to breast-feeding prior to delivery, breast-feeding intention and uptake, demographic and socio-economic attributes of the mothers, CTVB of maternal home address at the time of each birth. Logistic regression analysis, categorical tests. Results Study sample: 1360 women divided across the CTVBs – at least 155 in any band or band aggregation. CTVB predicted only one belief or attitude – that bottle-feeding was more convenient for the mother. However only 31% of 'CTVB A infants' are fully breast fed at 4 weeks of life whereas for 'CTVB E+ infants' the rate is 57%. CTVB is also strongly associated with maternal social class, home conditions, parental educational attainment, family income and smoking habit. Conclusion CTVB predicts breast-feeding rates and links them with social circumstances. CTVB could be used as the basis for accurate resource allocation for community paediatric services: UK breast-feeding rates are low and merit targeted promotion. PMID:16405729

Effectiveness of the Baby Friendly Community Initiative in Italy: a non-randomised controlled study

PubMed Central

Cattaneo, Adriano; Bettinelli, Maria Enrica; Chapin, Elise; Macaluso, Anna; Córdova do Espírito Santo, Lílian; Murante, Anna Maria; Montico, Marcella

2016-01-01

Objective To assess the effectiveness of the Baby Friendly Community Initiative (BFCI) on exclusive breast feeding at 6 months. Design Controlled, non-randomised trial. Setting 18 Local Health Authorities in 9 regions of Italy. Participants 5094 mother/infant dyads in 3 cohorts were followed up to 12 months after birth in 3 rounds of data collection: at baseline, after implementation of the intervention in the early intervention group and after implementation in the late intervention group. 689 (14%) dyads did not complete the study. Intervention Implementation of the 7 steps of the BFCI. Main outcome measures The rate of exclusive breast feeding at 6 months was the primary outcome; breast feeding at discharge, 3 and 12 months was also measured. Results The crude rates of exclusive breast feeding at discharge, 3 and 6 months, and of any breast feeding at 6 and 12 months increased at each round of data collection after baseline in the early and late intervention groups. At the end of the project, 10% of infants were exclusively breast fed at 6 months and 38% were continuing to breast feed at 12 months. However, the comparison by adjusted rates and logistic regression failed to show statistically significant differences between groups and rounds of data collection in the intention-to-treat analysis, as well as when compliance with the intervention and training coverage was taken into account. Conclusions The study failed to demonstrate an effect of the BFCI on the rates of breast feeding. This may be due, among other factors, to the time needed to observe an effect on breast feeding following this complex intervention. PMID:27154476

Effect of passive smoking on growth and infection rates of breast-fed and non-breast-fed infants.

PubMed

Yilmaz, Gonca; Hizli, Samil; Karacan, Candemir; Yurdakök, Kadriye; Coşkun, Turgay; Dilmen, Uğur

2009-06-01

The aim of the present study was to determine the effect of passive tobacco smoking on growth and infection rate of infants, and to evaluate whether breast-feeding might be protective against harmful effects of cigarette smoke. A cross-sectional study on 254 6-7-month-old infants was carried out. A questionnaire was given to mothers; and infants' head circumference, bodyweight, height, and urinary cotinine levels were measured. Multivariate analysis of factors influencing lower respiratory tract infections showed that smoking mothers increased the rate by 9.1-fold; breast-feeding decreased it by 3.3-fold; formula feeding at birth increased it by a factor of 15.2; another smoker at home increased it by a factor of 40.1. Multivariate analysis of factors influencing upper respiratory tract infections showed that smoking mothers increased the rate by a factor of 23; early formula feeding increased it by a factor of 62; breast-feeding decreased it by a factor of 5; smoking fathers increased it by a factor of 15. Multivariate analysis of factors influencing otitis media found that smoking mothers and fathers increased it by a factor of 9.4 and 6.15, respectively, and breast-feeding decreased it by a factor of 5.4. Tobacco smoke exposure of infants has negative consequences on growth, otitis media, and upper and lower respiratory tract infections. Breast-feeding promoted the growth of infants who were passively exposed to tobacco smoke and protected them against infections. Smoking should not be permitted in households with infants. When this is impossible, breast-feeding should be promoted to protect the infants against the health hazards of passive smoking.

Maternal behavior and infant physiology during feeding in premature and term infants over the first year of life.

PubMed

Weber, Ashley M; Harrison, Tondi M

2014-12-01

Little is known about the relationship between maternal behavior and the stability of premature infants' physiologic responses during feeding. In a secondary data analysis, we examined relationships between quality of maternal behavior and cardiorespiratory physiology during feeding in 61 premature and 53 term infants at four times over the first year of life. Measures included heart rate (HR), respiratory rate (RR), and oxygen saturation; Child Feeding Skills Checklist; and Parent-Child Early Relational Assessment. Birthweight, gestational age, and neurodevelopmental risk were covariates. Quality of maternal behavior did not predict infants' physiologic response to feeding. However, birthweight was related to infant feeding physiology among all infants over the first year of life. Stress during fetal life, which may lead to impaired intrauterine growth and low birthweight, may have longitudinal effects on cardiorespiratory functioning of premature infants. Research is needed to further investigate the biological pathways by which maternal-infant interaction supports behavioral and physiologic feeding outcomes of premature infants. © 2014 Wiley Periodicals, Inc.

Brain Lesions among Orally Fed and Gastrostomy-Fed Dysphagic Preterm Infants: Can Routine Qualitative or Volumetric Quantitative Magnetic Resonance Imaging Predict Feeding Outcomes?

PubMed

Kashou, Nasser H; Dar, Irfaan A; El-Mahdy, Mohamed A; Pluto, Charles; Smith, Mark; Gulati, Ish K; Lo, Warren; Jadcherla, Sudarshan R

2017-01-01

The usefulness of qualitative or quantitative volumetric magnetic resonance imaging (MRI) in early detection of brain structural changes and prediction of adverse outcomes in neonatal illnesses warrants further investigation. Our aim was to correlate certain brain injuries and the brain volume of feeding-related cortical and subcortical regions with feeding method at discharge among preterm dysphagic infants. Using a retrospective observational study design, we examined MRI data among 43 (22 male; born at 31.5 ± 0.8 week gestation) infants who went home on oral feeding or gastrostomy feeding (G-tube). MRI scans were segmented, and volumes of brainstem, cerebellum, cerebrum, basal ganglia, thalamus, and vermis were quantified, and correlations were made with discharge feeding outcomes. Chi-squared tests were used to evaluate MRI findings vs. feeding outcomes. ANCOVA was performed on the regression model to measure the association of maturity and brain volume between groups. Out of 43 infants, 44% were oral-fed and 56% were G-tube fed at hospital discharge (but not at time of the study). There was no relationship between qualitative brain lesions and feeding outcomes. Volumetric analysis revealed that cerebellum was greater ( p  < 0.05) in G-tube fed infants, whereas cerebrum volume was greater ( p  < 0.05) in oral-fed infants. Other brain regions did not show volumetric differences between groups. This study concludes that neither qualitative nor quantitative volumetric MRI findings correlate with feeding outcomes. Understanding the complexity of swallowing and feeding difficulties in infants warrants a comprehensive and in-depth functional neurological assessment.

[Effects of phosphorus application rates and depths on P utilization and loss risk in a maize-soybean intercropping system].

PubMed

Zhao, Wei; Song, Chun; Zhou, Pan; Wang, Jia Yu; Xui, Feng; Ye, Fang; Wang, Xiao Chun; Yang, Wen Yu

2018-04-01

In order to explore the advantage of intercropping on phosphorus (P) efficient utilization and the reduction of soil P loss, a field experiment in a maize-soybean intercropping system, which included three P application (P 2 O 5 ) rates (CP: 168 kg·hm -2 ; RP 1 : 135 kg·hm -2 ; RP 2 : 101 kg·hm -2 ) and three P application depths (D 1 : applied in 5 cm depth; D 2 : applied in 15 cm depth; D 3 : 1/2 of P fertilizer applied in 5 cm depth and another 1/2 in 15 cm depth) was carried out to analyze the effects of P application rates and depth on crop aboveground biomass, grain yield, crop P uptake, soil total and available P contents, and soil P adsorption-desorption characteristics. Compared with control treatment, the aboveground biomass, grain yield, crop P uptake, soil total P, and available P content were increased significantly by P application, regardless of P rate and application depth. Under the same application depth, RP 1 had similar grain yield but higher crop P uptake compared with CP, and thus higher P apparent utilization efficiency. Under the same P application rate, the application depth of D 2 had the highest crop aboveground biomass, grain yield, P uptake, soil total P, and available P. According to the characteristic of soil P adsorption-desorption, the treatment with the rate of RP 1 and the depth of D 2 had the strongest soil P retention capacity, which had advantage in alleviating P loss. These results suggested that reducing application rate but increasing application depth of P fertilizer could improve P use efficiency and reduce soil P loss without sacrifice in crop production in maize-soybean relay intercropping system.

Model-supported estimation of mortality rates in Baltic cod (Gadus morhua callarias L.) larvae: the varying impact of 'critical periods'

PubMed Central

Voss, Rüdiger; Hinrichsen, Hans-Harald; Wieland, Kai

2001-01-01

Background Changes in the survival-rate during the larval phase may strongly influence the recruitment level in marine fish species. During the larval phase different 'critical periods' are discussed, e.g. the hatching period and the first-feeding period. No such information was available for the Baltic cod stock, a commercially important stock showing reproduction failure during the last years. We calculated field-based mortality rates for larval Baltic cod during these phases using basin-wide abundance estimates from two consecutive surveys. Survey information was corrected by three dimensional hydrodynamic model runs. Results The corrections applied for transport were of variable impact, depending on the prevailing circulation patterns. Especially at high wind forcing scenarios, abundance estimates have the potential to be biased without accounting for transport processes. In May 1988 mortality between hatch and first feeding amounted to approximately 20% per day. Mortality rates during the onset of feeding were considerably lower with only 7% per day. In August 1991 the situation was vice versa: Extremely low mortality rates of 0.08% per day were calculated between hatch and first feeding, while the period between the onset of feeding to the state of an established feeder was more critical with mortality rates of 22% per day. Conclusions Mortality rates during the different proposed 'critical periods' were found to be highly variable. Survival rates of Baltic cod are not only influenced by a single 'critical period', but can be limited at different points during the larval phase, depending on several biotic and abiotic factors. PMID:11737879

The Iceland Deep Drilling Project 4.5 km deep well, IDDP-2, in the seawater-recharged Reykjanes geothermal field in SW Iceland has successfully reached its supercritical target

NASA Astrophysics Data System (ADS)

Friðleifsson, Guðmundur Ó.; Elders, Wilfred A.; Zierenberg, Robert A.; Stefánsson, Ari; Fowler, Andrew P. G.; Weisenberger, Tobias B.; Harðarson, Björn S.; Mesfin, Kiflom G.

2017-11-01

The Iceland Deep Drilling Project research well RN-15/IDDP-2 at Reykjanes, Iceland, reached its target of supercritical conditions at a depth of 4.5 km in January 2017. After only 6 days of heating, the measured bottom hole temperature was 426 °C, and the fluid pressure was 34 MPa. The southern tip of the Reykjanes peninsula is the landward extension of the Mid-Atlantic Ridge in Iceland. Reykjanes is unique among Icelandic geothermal systems in that it is recharged by seawater, which has a critical point of 406 °C at 29.8 MPa. The geologic setting and fluid characteristics at Reykjanes provide a geochemical analog that allows us to investigate the roots of a mid-ocean ridge submarine black smoker hydrothermal system. Drilling began with deepening an existing 2.5 km deep vertical production well (RN-15) to 3 km depth, followed by inclined drilling directed towards the main upflow zone of the system, for a total slant depth of 4659 m ( ˜ 4.5 km vertical depth). Total circulation losses of drilling fluid were encountered below 2.5 km, which could not be cured using lost circulation blocking materials or multiple cement jobs. Accordingly, drilling continued to the total depth without return of drill cuttings. Thirteen spot coring attempts were made below 3 km depth. Rocks in the cores are basalts and dolerites with alteration ranging from upper greenschist facies to amphibolite facies, suggesting that formation temperatures at depth exceed 450 °C. High-permeability circulation-fluid loss zones (feed points or feed zones) were detected at multiple depth levels below 3 km depth to bottom. The largest circulation losses (most permeable zones) occurred between the bottom of the casing and 3.4 km depth. Permeable zones encountered below 3.4 km accepted less than 5 % of the injected water. Currently, the project is attempting soft stimulation to increase deep permeability. While it is too early to speculate on the energy potential of this well and its economics, the IDDP-2 is a milestone in the development of geothermal resources and the study of hydrothermal systems. It is the first well that successfully encountered supercritical hydrothermal conditions, with potential high-power output, and in which on-going hydrothermal metamorphism at amphibolite facies conditions can be observed. The next step will be to carry out flow testing and fluid sampling to determine the chemical and thermodynamic properties of the formation fluids.

Goals for Human Milk Feeding in Mothers of Very Low Birth Weight Infants: How Do Goals Change and Are They Achieved During the NICU Hospitalization?

PubMed Central

Bigger, Harold; Patel, Aloka L.; Rossman, Beverly; Fogg, Louis F.; Meier, Paula

2015-01-01

Abstract Background: Little is known about human milk (HM) feeding goals for mothers of very low birth weight (VLBW) (<1,500 g birth weight) infants, especially for black mothers, for whom rates of VLBW birth are higher and lactation rates lower. This study examined the establishment, modification, and achievement of HM feeding goals during neonatal intensive care unit (NICU) hospitalization for mothers of VLBW infants and the influence of maternal race and income. Materials and Methods: A prospective cohort study measured maternal HM feeding goals (exclusive [EHM], partial, none) predelivery and during three time intervals: day of life (DOL) 1–14, 15–28, and 29–72. Goal achievement compared the goal for the time interval with the proportion of HM feedings received by the infant. Goal establishment, modification, and achievement were examined using chi-squared and contingency tables. Results: Three hundred fifty-two mother–infant dyads (53% black; 70% low-income; mean birth weight, 1,048 g) were studied. Predelivery, 55% of mothers planned to provide EHM; fewer black and low-income mothers chose EHM. During DOL 1–14, 63% of mothers chose EHM, and predelivery racial differences disappeared. Only 10% of mothers chose exclusive at-breast EHM feedings. EHM feeding goals decreased during NICU hospitalization, especially for black mothers. Whereas most mothers met their HM feeding goals initially, achievement rates declined during hospitalization. Mothers' EHM goal achievement was not influenced by race or income. Conclusions: Mothers changed their predelivery HM feeding goals after birth of a VLBW infant. Longitudinally, HM feeding goals and achievement reflected less HM use, highlighting the need to target lactation maintenance in this population. PMID:26110439

Optimization of Straight Cylindrical Turning Using Artificial Bee Colony (ABC) Algorithm

NASA Astrophysics Data System (ADS)

Prasanth, Rajanampalli Seshasai Srinivasa; Hans Raj, Kandikonda

2017-04-01

Artificial bee colony (ABC) algorithm, that mimics the intelligent foraging behavior of honey bees, is increasingly gaining acceptance in the field of process optimization, as it is capable of handling nonlinearity, complexity and uncertainty. Straight cylindrical turning is a complex and nonlinear machining process which involves the selection of appropriate cutting parameters that affect the quality of the workpiece. This paper presents the estimation of optimal cutting parameters of the straight cylindrical turning process using the ABC algorithm. The ABC algorithm is first tested on four benchmark problems of numerical optimization and its performance is compared with genetic algorithm (GA) and ant colony optimization (ACO) algorithm. Results indicate that, the rate of convergence of ABC algorithm is better than GA and ACO. Then, the ABC algorithm is used to predict optimal cutting parameters such as cutting speed, feed rate, depth of cut and tool nose radius to achieve good surface finish. Results indicate that, the ABC algorithm estimated a comparable surface finish when compared with real coded genetic algorithm and differential evolution algorithm.

Why are 'hard-to-reach' women not engaging in a breastfeeding peer support programme?

PubMed

Islam, May Patricia

2016-02-01

ABSTRACT Increasing breastfeeding rates is one way of reducing health inequality and breastfeeding peer support is seen an effective method to improve breastfeeding rates in low-income areas. Local quantitative data indicated a poor uptake of breastfeeding peer support in two deprived areas in a south-east London borough. This evaluation set out to investigate in more depth why the uptake was poor. Using semi-structured interviews, 11 women were interviewed, eight of whom declined the support and three embraced it. The findings indicate insurmountable barriers for the respondents in initiating and sustaining breastfeeding in a sometimes undermining formula-feeding community. They also show that early support and a good start were crucial for women to be able to withstand these barriers, with many women surreptitiously breastfeeding unbeknown to those caring for them. The respondents were wary of asking for help, knew little of the peer support programme, were distrustful as to what a peer supporter did and what she could do for them, and consequently some endured pain without recourse to support.

Positively charged microporous ceramic membrane for the removal of Titan Yellow through electrostatic adsorption.

PubMed

Cheng, Xiuting; Li, Na; Zhu, Mengfu; Zhang, Lili; Deng, Yu; Deng, Cheng

2016-06-01

To develop a depth filter based on the electrostatic adsorption principle, positively charged microporous ceramic membrane was prepared from a diatomaceous earth ceramic membrane. The internal surface of the highly porous ceramic membrane was coated with uniformly distributed electropositive nano-Y2O3 coating. The dye removal performance was evaluated through pressurized filtration tests using Titan Yellow aqueous solution. It showed that positively charged microporous ceramic membrane exhibited a flow rate of 421L/(m(2)·hr) under the trans-membrane pressure of 0.03bar. Moreover it could effectively remove Titan Yellow with feed concentration of 10mg/L between pH3 to 8. The removal rate increased with the enhancement of the surface charge properties with a maximum rejection of 99.6%. This study provides a new and feasible method of removing organic dyes in wastewater. It is convinced that there will be a broad market for the application of charged ceramic membrane in the field of dye removal or recovery from industry wastewater. Copyright © 2016. Published by Elsevier B.V.

Chip morphology as a performance predictor during high speed end milling of soda lime glass

NASA Astrophysics Data System (ADS)

Bagum, M. N.; Konneh, M.; Abdullah, K. A.; Ali, M. Y.

2018-01-01

Soda lime glass has application in DNA arrays and lab on chip manufacturing. Although investigation revealed that machining of such brittle material is possible using ductile mode under controlled cutting parameters and tool geometry, it remains a challenging task. Furthermore, ability of ductile machining is usually assed through machined surface texture examination. Soda lime glass is a strain rate and temperature sensitive material. Hence, influence on attainment of ductile surface due to adiabatic heat generated during high speed end milling using uncoated tungsten carbide tool is investigated in this research. Experimental runs were designed using central composite design (CCD), taking spindle speed, feed rate and depth of cut as input variable and tool-chip contact point temperature (Ttc) and the surface roughness (Rt) as responses. Along with machined surface texture, Rt and chip morphology was examined to assess machinability of soda lime glass. The relation between Ttc and chip morphology was examined. Investigation showed that around glass transition temperature (Tg) ductile chip produced and subsequently clean and ductile final machined surface produced.

Dietary uptake of Cu sorbed to hydrous iron oxide is linked to cellular toxicity and feeding inhibition in a benthic grazer

USGS Publications Warehouse

Cain, Daniel J.; Croteau, Marie-Noele; Fuller, Christopher C.; Ringwood, Amy H.

2016-01-01

Whereas feeding inhibition caused by exposure to contaminants has been extensively documented, the underlying mechanism(s) are less well understood. For this study, the behavior of several key feeding processes, including ingestion rate and assimilation efficiency, that affect the dietary uptake of Cu were evaluated in the benthic grazer Lymnaea stagnalis following 4–5 h exposures to Cu adsorbed to synthetic hydrous ferric oxide (Cu–HFO). The particles were mixed with a cultured alga to create algal mats with Cu exposures spanning nearly 3 orders of magnitude at variable or constant Fe concentrations, thereby allowing first order and interactive effects of Cu and Fe to be evaluated. Results showed that Cu influx rates and ingestion rates decreased as Cu exposures of the algal mat mixture exceeded 104 nmol/g. Ingestion rate appeared to exert primary control on the Cu influx rate. Lysosomal destabilization rates increased directly with Cu influx rates. At the highest Cu exposure where the incidence of lysosomal membrane damage was greatest (51%), the ingestion rate was suppressed 80%. The findings suggested that feeding inhibition was a stress response emanating from excessive uptake of dietary Cu and cellular toxicity.

Lethal/sublethal responses of Daphnia magna to acute norfloxacin contamination and changes in phytoplankton-zooplankton interactions induced by this antibiotic

NASA Astrophysics Data System (ADS)

Pan, Ying; Yan, Shi-Wei; Li, Ruo-Zhu; Hu, Yi-Wen; Chang, Xue-Xiu

2017-01-01

Although the well-known antibiotic norfloxacin (NOR) is recognized as an important environmental pollutant, little is known about its impacts on ecological processes, particularly on species interactions. In this paper, we quantified Daphnia magna (Crustacea, Cladocera) responses in mortality rate at lethal NOR concentrations (0, 25, 50, 100, 200, 300 and 400 mg L-1), and in heartbeat rate, swimming behavior and feeding rate (on the green alga Chlorella pyrenoidosa) at sublethal NOR concentrations (0, 25, 50 and 100 mg L-1) to determine the effects of this antibiotic in plankton systems. In 96-h-long lethal experiment, mortality rates of D. magna increased significantly with increasing NOR concentration and exposure time. In sublethal experiments, heartbeat rate decreased, while time ratio of vertical to horizontal swimming (TVH) and the duration of quiescence increased in D. magna individuals exposed to increasing NOR concentrations after 4 and 12 h of exposure. These collectively led to decreases in both average swimming ability and feeding rate, consistent with the positive relationship between average swimming ability and feeding rate. Overall, results indicate that, by affecting zooplankton heartbeat rate and behavior, NOR decreased feeding efficiency of D. magna even at low doses, therefore, it might seriously compromise ecosystem health and function.

Diet and trophic ecology of the lanternfish Electrona risso (Cocco 1829) in the Strait of Messina (central Mediterranean Sea) and potential resource utilization from the Deep Scattering Layer (DSL)

NASA Astrophysics Data System (ADS)

Battaglia, Pietro; Andaloro, Franco; Esposito, Valentina; Granata, Antonia; Guglielmo, Letterio; Guglielmo, Rosanna; Musolino, Simona; Romeo, Teresa; Zagami, Giacomo

2016-07-01

The feeding habits of the mesopelagic lanternfish Electrona risso from the Strait of Messina (central Mediterranean Sea) were analyzed for the first time. A total of 326 individuals were collected stranded along the Sicilian coast of the Strait of Messina from October 2012 to May 2013. Specimens ranged from 12.0 to 53.8 mm LS (mean LS = 38.6 ± 8.4 mm). Their stomach content was examined and prey composition and feeding strategy were investigated. The results indicate that E. risso is a specialist predator, which feeds mainly on the small mesopelagic fish Cyclothone braueri (%IRI = 74.06) and in minor proportion on zooplankton, with a prevalence of copepods. The specialized feeding strategy of E. risso is confirmed by the low value of Levins standardized index (Bj = 0.141), which indicated a restricted niche breadth. The value of the index of trophic level (TROPH) for E. risso resulted 4.20. The prey composition suggests that E. risso can be considered a weakly vertical migrating species, that feeds on the DSL crustacean and fish communities below 300 m of depth.

History of the magmatic feeding system of the Campi Flegrei caldera (Italy)

NASA Astrophysics Data System (ADS)

Civetta, L.; Arienzo, I.; D'Antonio, M.; di Renzo, V.; di Vito, M. A.; Orsi, G.

2007-05-01

The definition of the magmatic feeding system of active volcanoes in terms of architecture, composition, crystallization time-scale, relationships between composition of the erupted magmas and structural position of the vents, and magma processes, is of paramount importance for volcanic hazards evaluation. Investigations aimed at defining the Campi Flegeri magmatic system, include detailed mineralogical, geochemical and isotopic analyses (Sr, Nd, Pb, Th,U). The magmatic feeding system of the Campi Flegrei caldera is characterized by deep and shallow magma reservoirs. In the deep reservoirs (20-10 km depth) mantle- derived magmas differentiated and were contaminated by continental crust. In the shallow reservoirs isotopically distinct magmas, further differentiated, contaminated, and mixed and mingled before eruptions. These processes generated isotopically distinct components, variably interacting with the different structural elements of the Campi Flegrei caldera through time. The relationships between the structural position of the eruption vents, during the last 15 ka of activity, and the isotopic composition of the magmas erupted at the Campi Flegrei caldera allow us to reconstruct the architecture of the magmatic feeding system and to infer the chemical and isotopic composition of the magma feeding a future eruption, according to vent position.

Vampire squid: detritivores in the oxygen minimum zone

PubMed Central

Hoving, Hendrik J. T.; Robison, Bruce H.

2012-01-01

Vampire squid (Vampyroteuthis infernalis) are considered phylogenetic relics with cephalopod features of both octopods and squids. They lack feeding tentacles, but in addition to their eight arms, they have two retractile filaments, the exact functions of which have puzzled scientists for years. We present the results of investigations on the feeding ecology and behaviour of Vampyroteuthis, which include extensive in situ, deep-sea video recordings from MBARI's remotely operated vehicles (ROVs), laboratory feeding experiments, diet studies and morphological examinations of the retractile filaments, the arm suckers and cirri. Vampire squid were found to feed on detrital matter of various sizes, from small particles to larger marine aggregates. Ingested items included the remains of gelatinous zooplankton, discarded larvacean houses, crustacean remains, diatoms and faecal pellets. Both ROV observations and laboratory experiments led to the conclusion that vampire squid use their retractile filaments for the capture of food, supporting the hypothesis that the filaments are homologous to cephalopod arms. Vampyroteuthis' feeding behaviour is unlike any other cephalopod, and reveals a unique adaptation that allows these animals to spend most of their life at depths where oxygen concentrations are very low, but where predators are few and typical cephalopod food is scarce. PMID:23015627

Vampire squid: detritivores in the oxygen minimum zone.

PubMed

Hoving, Hendrik J T; Robison, Bruce H

2012-11-22

Vampire squid (Vampyroteuthis infernalis) are considered phylogenetic relics with cephalopod features of both octopods and squids. They lack feeding tentacles, but in addition to their eight arms, they have two retractile filaments, the exact functions of which have puzzled scientists for years. We present the results of investigations on the feeding ecology and behaviour of Vampyroteuthis, which include extensive in situ, deep-sea video recordings from MBARI's remotely operated vehicles (ROVs), laboratory feeding experiments, diet studies and morphological examinations of the retractile filaments, the arm suckers and cirri. Vampire squid were found to feed on detrital matter of various sizes, from small particles to larger marine aggregates. Ingested items included the remains of gelatinous zooplankton, discarded larvacean houses, crustacean remains, diatoms and faecal pellets. Both ROV observations and laboratory experiments led to the conclusion that vampire squid use their retractile filaments for the capture of food, supporting the hypothesis that the filaments are homologous to cephalopod arms. Vampyroteuthis' feeding behaviour is unlike any other cephalopod, and reveals a unique adaptation that allows these animals to spend most of their life at depths where oxygen concentrations are very low, but where predators are few and typical cephalopod food is scarce.

Impact of integrated child development scheme on child malnutrition in West Bengal, India.

PubMed

Dutta, Arijita; Ghosh, Smritikana

2017-10-01

With child malnutrition detected as a persistent problem in most of the developing countries, public policy has been directed towards offering community-based supplementary feeding provision and nutritional information to caregivers. India, being no exception, has initiated these programs as early as 1970s under integrated child development scheme. Using propensity score matching technique on primary data of 390 households in two districts of West Bengal, an Eastern state in India, the study finds that impact of being included in the program and receiving supplementary feeding is insignificant on child stunting measures, though the program can break the intractable barriers of child stunting only when the child successfully receives not only just the supplementary feeding but also his caregiver collects crucial information on nutritional awareness and growth trajectory of the child. Availability of regular eggs in the feeding diet too can reduce protein-related undernutrition. Focusing on just feeding means low depth of other services offered under integrated child development scheme, including pre-school education, nutritional awareness, and hygiene behavior; thus repealing a part of the apparent food-secure population who puts far more importance on the latter services. © 2016 John Wiley & Sons Ltd.

Effect of Processing Parameters on the Physical, Thermal, and Combustion Properties of Plasma-Synthesized Aluminum Nanopowders

DTIC Science & Technology

2011-02-01

only a couple of processing parameters. Table 2 Statistical results of the DOE Run no. Plasma power Feed rate System pressure Quench rate...and quench rate. Particle size was chosen as the measured response due to its predominant effect on material properties. The results of the DOE...showed that feed rate and quench rate have the largest effect on particle size. All synthesized powders were characterized by thermogravimetric

The use of food wastes as feed ingredients for culturing grass carp (Ctenopharyngodon idellus) in Hong Kong.

PubMed

Choi, W M; Lam, C L; Mo, W Y; Wong, M H

2016-04-01

Different types of food wastes, e.g., meats, bones, cereals, fruits, and vegetables, were collected from hotels in Hong Kong, mixed in different ratio, and processed into feed pellets (food wastes (FWs) A, B, and C) for feeding trials in aquaculture species. Grass carp fed with cereal-dominant feed (FW A) showed the best growth (in terms of specific growth rate, relative weight gain, and protein efficiency ratio), among all food waste feeds. However, the growth rates of food waste groups especially the meat product-contained feeds (FW B and FW C) were lower than the commercial feed, Jinfeng(®) 613 formulation (control). The results indicated that grass carp utilized plant proteins better than animal proteins and preferred carbohydrate as a major energy source than lipid. The high-lipid content in feed containing meat products was also a possible reason for hindering growth and resulted high body lipid. It is suggested that lipid should be removed in the preparation of food waste feed or further investigations by implementing supplements, e.g., enzymes in feed to enhance lipid or protein utilization by fish. This utilization of food waste could be an effective and practical way to deal with these wastes in this densely populated city.

The effect of amino acid lysine and methionine addition on feed toward the growth and retention on mud crab (Scylla serrata)

NASA Astrophysics Data System (ADS)

Alissianto, Y. R.; Sandriani, Z. A.; Rahardja, B. S.; Agustono; Rozi

2018-04-01

High market demand of mud crab (Scylla serrata) encourages farmers to increase the production of mud crab. However, mud crab can not synthesize essential amino acids, so it is necessary to supply essential amino acids such as lysine and methionine in the diet. This study aims to determine the effect of lysine and methionine on feeds to increase growth and retention of mud crabs (Scylla serrata). In this study the amount of lysine amino acid and methionine added to the trash fish diet were: P0 (0: 0%); P1 (0.75: 0.75%); P2 (1: 1%); P3 (1.25: 1.25%); P4 (1.5: 1.5%) with the ratio of lysine and methionine 1: 1. The parameters observed in this study were Survival Rate (SR), Specific Growth Rate (SGR), Feed Conversion Ratio (FCR), Efficiency Feed (EF), protein retention and energy retention. The results of the 35-day maintenance study showed significant differences (P <0.05) against Specific Growth Rate (SGR), Feed Conversion Ratio (FCR), Efficiency Feed (EF), protein retention and no significant effect (P> 0.05) on energy retention and Survival Rate (SR) on mud crab. The best results in this study were found in P4 treatment with addition of lysine amino acids and methionine (1.5: 1.5%).

Spread of hatch and delayed feed access affect post hatch performance of female broiler chicks up to day 5.

PubMed

Wang, Y; Li, Y; Willems, E; Willemsen, H; Franssens, L; Koppenol, A; Guo, X; Tona, K; Decuypere, E; Buyse, J; Everaert, N

2014-04-01

It is not rare that newly hatched chicks remain without feed for about 24 to 48 h before they are placed on farms due to a series of logistic operations. Furthermore, the spread in hatching time can also mount up to 30 to 48 h for late v. early hatchers. In other words, the practice is a complex combination of spread of hatch and delayed feed access. The present study was aimed to investigate the combined effects of hatching time with a delay in feed access of 48 h, starting from their hatch-time (biological age). When chicks had access to feed immediately after hatch, late hatchers had a higher feed intake and relative growth rate up to day 5 compared with their early hatched counterparts. Feed deprivation during the first 48 h resulted in retarded early growth rate, which was further aggravated by an impaired feed intake after refeeding. In addition, the differential effects of hatching time on relative growth rate and feed intake observed in immediately fed chicks were eliminated by the 48 h feed delay. The yolk utilization after hatch was faster for the late hatchers up to biological day 2 regardless of the feeding treatments. Hatching muscle glycogen content was higher in the late hatchers compared with that of their early counterparts at hatch and at biological day 2 independent of feeding treatment. Moreover, the liver glycogen content of the late hatchers was also higher at hatch. For the immediately fed chicks, the proportional breast muscle weight of the late hatchers was higher at biological day 2 and 5. For the starved chicks, on the other hand, this effect was only observed after they had access to feed (biological day 5). The different plasma T3 levels at hatch may have contributed to the different post hatch performance. It is concluded that the spread of hatch influenced post hatch performance, especially appetite and growth at least until day 5. Moreover, the delay in feed access interacted with the hatching time and caused adverse effects on the post hatch performance.

United Nations High Commissioner for Refugees feeding program performance in Kenya and Tanzania: a retrospective analysis of routine Health Information System data.

PubMed

Tappis, Hannah; Doocy, Shannon; Haskew, Christopher; Wilkinson, Caroline; Oman, Allison; Spiegel, Paul

2012-06-01

The United Nations High Commissioner for Refugees (UNHCR) Health Information System is a primary source of routine nutrition program data and provides a comprehensive assessment of UNHCR selective feeding programs in more than 90 refugee camps in 18 countries worldwide. To evaluate the coverage and effectiveness of UNHCR supplementary and therapeutic feeding programs for malnourished children under 5 years of age in Kenya and Tanzania refugee camps. Analysis of Kenya and Tanzania refugee camp population, growth monitoring and nutrition program data from the UNHCR Health Information System. UNHCR-supported implementing partners in Kenya and Tanzania admitted nearly 45,000 malnourished refugee children in selective feeding programs between January 2006 and May 2009. Average recovery rates of 77.1% and 84.6% in the therapeutic and supplementary programs, respectively, mortality rates of less than 1%, and average readmission below 5% suggest that feeding programs had a beneficial effect on enrolled children. Increasing admission and enrollment in supplementary feeding programs was successful in preventing cases of severe malnutrition in some camps. Further attention to these camps would be likely to yield sizeable benefits in terms of absolute reductions in malnutrition prevalence and mortality rates.

Factors influencing bird foraging preferences among conspecific fruit trees

USGS Publications Warehouse

Foster, M.S.

1990-01-01

The rates at which birds visit fruiting individuals of Allophylus edulis (Sapindaceae) differ substantially among trees. Such avian feeding preferences are well-known, but usually involve fruits and trees of different species. Factors controlling avian preferences for particular trees in a population of conspecifics are generally undocumented. To address this issue, I attempted to correlate rates at which individual birds and species fed in trees of Allophylus with 27 fruit or plant characteristics. Birds that swallow fruits whole were considered separately from those that feed in other ways. Plant characters were selected on the basis of their potential influence on feeding efficiency or predation risk, assuming that birds would select feeding trees so as to maximize the net rate of energy or nutrient intake and to minimize predation. Correlations were found between feeding visits by some groups of birds and percent water in the pulp, milligrams of mineral ash in the pulp, and crop size. No character was correlated with feeding visits by all groups of birds in both years of the study. The correlations with water and mineral ash are unexplained and may be artifacts. The correlation with crop size may represent a tactic to minimize predation.

Resource utilization by deep-sea sharks at the Le Danois Bank, Cantabrian Sea, north-east Atlantic Ocean.

PubMed

Preciado, I; Cartes, J E; Serrano, A; Velasco, F; Olaso, I; Sánchez, F; Frutos, I

2009-10-01

The feeding habits of birdbeak dogfish Deania calcea, velvet belly lantern shark Etmopterus spinax and blackmouth catshark Galeus melastomus at Le Danois Bank, Cantabrian Sea, south Bay of Biscay were studied in relation to their bathymetric distribution. Deep-sea sharks were collected during two multidisciplinary surveys carried out in October 2003 and April 2004 at the Le Danois Bank. Two different habitats were defined: (1) the top of the bank, ranging from 454 to 642 m depth and covered by fine-sand sediments with a low percentage of organic matter, and (2) the inner basin located between the bank and the Cantabrian Sea's continental shelf, at depths of 810-1048 m, which was characterized by a high proportion of silt and organic matter. Deania calcea was not present at the top of the bank but was abundant below 642 m, while E. spinax was abundant in the shallower top of the bank but was not found in the deeper inner basin. There was almost no bathymetric overlap between these two deep-sea shark species. Galeus melastomus was found over the whole depth range. There seemed to be an ontogenetic segregation with depth for this species, however, since 80% of the specimens collected at the top of the bank were < 600 mm total length (L(T)) (mean 510 mm L(T)), whereas larger individuals (mean 620 mm L(T)) inhabited deeper zones. Galeus melastomus exhibited a significantly higher feeding intensity than both E. spinax at the top of the bank and D. calcea in the inner basin. Little dietary overlap between D. calcea and G. melastomus in the inner basin was found, with D. calcea being an ichthyophagous predator while the diet of G. melastomus at these depths was composed of a variety of meso-bathypelagic shrimps (e.g. Acantephyra pelagica, Pasiphaea spp. and Sergia robusta), cephalopods and fishes. The diets of E. spinax and G. melastomus at the top of the bank showed a high dietary overlap of euphausiids, which represented the main prey taxa for both species. Euphausiids declined in abundance with depth which was reflected in the diet of G. melastomus. The cluster analysis of prey affinities among hauls depicted two major groups, corresponding to the two different habitats (top of the bank and inner basin). Redundancy analysis also indicated top-basin segregation, with euphausiids representing the main prey taxa at the top of the bank and bathypelagic shrimps in the inner basin. Euphausiids and Micromesistius poutassou were key prey within the Le Danois Bank ecosystem since they were positively selected by the three deep-sea shark species. These results show that the feeding ecology of these predators in Le Danois Bank ecosystem is highly influenced by depth-related variables, as a result of changes in prey availability. Overall results were analysed in relation to the deep-sea Le Danois ecosystem structure and functioning.

FINAL REPORT DM1200 TESTS WITH AZ 101 HLW SIMULANTS VSL-03R3800-4 REV 0 2/17/04

DOE Office of Scientific and Technical Information (OSTI.GOV)

KRUGER AA; MATLACK KS; BARDAKCI T

2011-12-29

This report documents melter and off-gas performance results obtained on the DM 1200 HLW Pilot Melter during processing of simulated HLW AZ-101 feed. The principal objectives of the DM1200 melter testing were to determine the achievable glass production rates for simulated HLW AZ-101 feed; determine the effect of bubbling rate and feed solids content on production rate; characterize melter off-gas emissions; characterize the performance of the prototypical off-gas system components as well as their integrated performance; characterize the feed, glass product, and off-gas effluents; and to perform pre- and post-test inspections of system components. The test objectives (including test successmore » criteria), along with how they were met, are outlined in a table.« less

Calculation of ground state rotational populations for kinetic gas homonuclear diatomic molecules including electron-impact excitation and wall collisions.

PubMed

Farley, David R

2010-09-07

A model has been developed to calculate the ground state rotational populations of homonuclear diatomic molecules in kinetic gases, including the effects of electron-impact excitation, wall collisions, and gas feed rate. The equations are exact within the accuracy of the cross sections used and of the assumed equilibrating effect of wall collisions. It is found that the inflow of feed gas and equilibrating wall collisions can significantly affect the rotational distribution in competition with nonequilibrating electron-impact effects. The resulting steady-state rotational distributions are generally Boltzmann for N≥3, with a rotational temperature between the wall and feed gas temperatures. The N=0,1,2 rotational level populations depend sensitively on the relative rates of electron-impact excitation versus wall collision and gas feed rates.

Metabolic rates of benthic deep-sea decapod crustaceans decline with increasing depth primarily due to the decline in temperature

NASA Astrophysics Data System (ADS)

Childress, J. J.; Cowles, D. L.; Favuzzi, J. A.; Mickel, T. J.

1990-06-01

The oxygen consumption rates of 11 species of benthic deep-sea decapod crustaceans were measured at a variety of temperatures to test the hypothesis that the metabolic rates of benthic crustaceans decline with increasing depth of occurrence only to the extent explained by the decline in temperature with depth. The species were captured at depths between 150 and 2000m off Southern California using an epibenthic beam trawl equipped with a thermally protecting cod-end to bring the animals to the surface uncontaminated by sediment and at the depth temperature. The data, combined with those for six species of shallower-living crustaceans from California waters, showed a significant decline in oxygen consumption rate with increased species' depths of occurrence, when the measurements were made at temperatures appropriate to each species' depth range. There was no significant relation between wet weight and depth of occurrence in these species. When the data were adjusted to 10°C using a moderate temperature effect factor (corresponding to Q10 values of 2-2.3 depending on the species and temperature range), the significant relationship between oxygen consumption rate and depth was lost, indicating that the observed decline with depth was due to the decline in temperature with depth. When the relationship between metabolic rate and depth of occurrence for the most active (carideans and penaeid) species were compared (ANCOVA) with that for the rest of the species, the active species had significantly higher rates. By combining this data set with data from the literature for a wide variety of shallow-living benthic decapod crustaceans, it was possible to create a data set of 35 species in which the effects of temperature, minimum depth of occurrence and body mass could be separated by multiple linear regression. This demonstrated highly significant effects of size and temperature, but no significant effect of depth for the entire data set and for the data set excluding penaeids and carideans. In contrast, the carideans showed a significant effect of depth on metabolic rate. This is discussed in terms of the adaptive and selective factors responsible for the well-known decline in metabolic rates of midwater crustaceans and fishes, an effect which does exceed the effect of temperature. It is suggested that the typical pattern for deeper living animals may be that metabolic rates on average vary as a function of depth due primarily to variation in temperature, except for the visually orienting pelagic groups (cephalopods, crustaceans and fishes). For those benthic forms which are particularly visually oriented and/or partially pelagic some significant depth-related decline in metabolism beyond that due to the decline in temperature is expected.

Population interactions among free-living bluefish and prey fish in an ocean environment.

PubMed

Safina, Carl; Burger, Joanna

1989-04-01

We used sonar to measure relative abundance, location, and depth of prey fish schools (primarily Anchoa and Ammodytes) in the ocean near Fire Island Inlet, New York from May to August for 4 years to examine predatorprey interactions. Prey fish numbers built through May, peaked in June, and thereafter declined coincident with the arrival of predatory bluefish. Bluefish abundance and feeding behavior correlated inversely with prey fish abundance and depth. Bluefish may drive seasonal patterns of prey abundance and distribution in this area through direct predation and by causing prey to flee.

Practices, predictors and consequences of expressed breast-milk feeding in healthy full-term infants.

PubMed

Bai, Dorothy Li; Fong, Daniel Yee Tak; Lok, Kris Yuet Wan; Wong, Janet Yuen Ha; Tarrant, Marie

2017-02-01

To investigate the prevalence and predictors of expressed breast-milk feeding in healthy full-term infants and its association with total duration of breast-milk feeding. Prospective cohort study. In-patient postnatal units of four public hospitals in Hong Kong. A total of 2450 mother-infant pairs were recruited in 2006-2007 and 2011-2012 and followed up prospectively for 12 months or until breast-milk feeding had stopped. Across the first 6 months postpartum, the rate of exclusive expressed breast-milk feeding ranged from 5·1 to 8·0 % in 2006-2007 and from 18·0 to 19·8 % in 2011-2012. Factors associated with higher rate of exclusive expressed breast-milk feeding included supplementation with infant formula, lack of previous breast-milk feeding experience, having a planned caesarean section delivery and returning to work postpartum. Exclusive expressed breast-milk feeding was associated with an increased risk of early breast-milk feeding cessation when compared with direct feeding at the breast. The hazard ratio (95 % CI) ranged from 1·25 (1·04, 1·51) to 1·91 (1·34, 2·73) across the first 6 months. Mothers of healthy term infants should be encouraged and supported to feed directly at the breast. Exclusive expressed breast-milk feeding should be recommended only when medically necessary and not as a substitute for feeding directly at the breast. Further research is required to explore mothers' reasons for exclusive expressed breast-milk feeding and to identify the health outcomes associated with this practice.

Jejunal feeding tubes can be efficiently and independently placed by intensive care unit teams.

PubMed

Welpe, Pascal; Frutiger, Adrian; Vanek, Patrik; Kleger, Gian-Reto

2010-01-01

Nutrition support is an important therapeutic measure in critically ill patients. Several studies have shown that the enteral route is preferable to the parenteral route. Insertion of a feeding tube beyond the ligament of Treitz combined with continuous gastric drainage will reduce regurgitation and probably also the rate of nosocomial pneumonia. This study was conducted to assess the safety, success rate, and time required to establish jejunal nutrition by the fluoroscopy-guided technique in intensive care unit (ICU) patients. This was a prospective observational study in the ICUs of a 300-bed and a 600-bed community hospital. Indications were large gastric residuals during attempted gastric feeding, severe acute pancreatitis, or recurrent aspiration. Feeding tubes were introduced by the ICU staff at bedside under fluoroscopic guidance (a senior ICU physician and a resident or a registered ICU nurse). The correct jejunal position was documented by the application of a radiopaque contrast medium through the tube. After confirmation of the correct position, jejunal tube feeding was immediately started. The insertion procedure in 38 patients lasted a median of 17 minutes. The median time from decision to place the tube until start of enteral feeding was 141 minutes. The success rate was 84.2%. No adverse events were observed. Fluoroscopic placement of a jejunal feeding tube at the bedside is fast, is safe, and has a high success rate when performed by well-trained ICU staff. Using this method makes the ICU team more self-sufficient when critically ill patients require enteral nutrition and no gastroenterologist is available.

Characterizing CH4, CO2 and N2O emission from barn feeding Tibetan sheep in Tibetan alpine pastoral area in cold season

NASA Astrophysics Data System (ADS)

Xu, Tianwei; Zhao, Na; Hu, Linyong; Xu, Shixiao; Liu, Hongjin; Ma, Li; Zhao, Xinquan

2017-05-01

Herein, methane (CH4), carbon dioxide (CO2) and nitrous oxide (N2O) emission from different aged barn feeding Tibetan sheep were characterized using a respiration chamber in combination with gas chromatograph method in cold season of 2013. This work was based on measuring the increase of gas concentration inside respiration chamber by the means of gas chromatograph. Results indicated that diurnal CH4 emission patterns for barn feeding Tibetan sheep were driven by feeding schedule, diurnal CO2 emission patterns were relatively stable with two slight emission peaks, diurnal N2O emission patterns were driven by the variation of temperature inside chamber. Diurnal CH4 emission rates were 17.65, 19.49 and 21.06 g sheep-1 d-1 for yearling, two-year and three-year barn feeding Tibetan sheep, account for 6.15%, 5.76% and 5.45% of their daily gross energy intakes, respectively. Diurnal CO2 emission rates were 526.88, 588.43 and 640.66 g sheep-1 d-1 for yearling, two-year and three-year barn feeding Tibetan sheep, respectively. Diurnal N2O emission rates were 1.64, 1.25 and 1.05 mg sheep-1 d-1 for yearling, two-year and three-year barn feeding Tibetan sheep, respectively. Three-year barn feeding Tibetan sheep released more CO2-eq on per unit BW and BW0.75 gain basis.

Potential cost savings for Medi-Cal, AFDC, food stamps, and WIC programs associated with increasing breast-feeding among low-income Hmong women in California.

PubMed

Tuttle, C R; Dewey, K G

1996-09-01

To determine the potential cost savings for four social service programs if breast-feeding rates increased among Hmong women in California. Cost-savings analysis. Hmong women in California. In this population, breast-feeding is currently uncommon, and use of contraceptives is minimal. Savings were based on estimates of the resulting decrease in infant morbidity, maternal fertility, and formula purchases (Special Supplemental Nutrition Program for Women, Infants, and Children) if women breast-fed each child for at least 6 months. Costs were projected over a 7.5-year period and future values were discounted with annual interest rates of 2% or 4%. Substantial savings estimates were associated with breast-feeding for all four programs. The total projected savings over the 7.5-year period ranges from $3,442 to $4,944 (4% discount) to $4,475 to $6,0960 (0% discount) per family enrolled in all four programs. This translates into an estimated yearly savings of between $459 and $659 (4% discount) and $597 and $808 (0% discount) per family. Although health care providers generally accept that breast-feeding is the preferred method for feeding infants, many still view the choice as a neutral one; that is, they consider low breast-feeding rates in the United States a cultural choice with no cost to society. This analysis provides evidence that breast-feeding is economically advantageous for individuals and society.

Feeding behavior and digestive physiology in sea cucumber Apostichopus japonicus.

PubMed

Sun, Jiamin; Zhang, Libin; Pan, Yang; Lin, Chenggang; Wang, Fang; Kan, Rentao; Yang, Hongsheng

2015-02-01

The feeding behavior and digestive physiology of the sea cucumber, Apostichopus japonicus are not well understood. A better understanding may provide useful information for the development of the aquaculture of this species. In this article the tentacle locomotion, feeding rhythms, ingestion rate (IR), feces production rate (FPR) and digestive enzyme activities were studied in three size groups (small, medium and large) of sea cucumber under a 12h light/12h dark cycle. Frame-by-frame video analysis revealed that all size groups had similar feeding strategies using a grasping motion to pick up sediment particles. The tentacle insertion rates of the large size group were significantly faster than those of the small and medium-sized groups (P<0.05). Feeding activities investigated by charge coupled device cameras with infrared systems indicated that all size groups of sea cucumber were nocturnal and their feeding peaks occurred at 02:00-04:00. The medium and large-sized groups also had a second feeding peak during the day. Both IR and FPR in all groups were significantly higher at night than those during the daytime (P<0.05). Additionally, the peak activities of digestive enzymes were 2-4h earlier than the peak of feeding. Taken together, these results demonstrated that the light/dark cycle was a powerful environment factor that influenced biological rhythms of A. japonicus, which had the ability to optimize the digestive processes for a forthcoming ingestion. Copyright © 2014 Elsevier Inc. All rights reserved.

Drilling of CFRP and GFRP composite laminates using one shot solid carbide step drill K44

NASA Astrophysics Data System (ADS)

Nagaraja, R.; Rangaswamy, T.

2018-04-01

Drilling is a very common machining operation to install fasteners for assembly of laminates Drilling of Carbon Fiber Reinforced Plastic (CFRP) and Glass Fiber Reinforced Plastic (GFRP) composite laminate materials are different from that of convention materials that causes excessive tool wear and edge delamination. This paper reports on the tool geometry, cutting speed and feed rate. In this work two composite materials CFRP-G926 and Glass-7781 composite materials of varying thickness are drilled to investigate the effect of feed rate, and cutting speed. The study mainly focused on drilling laminates specimen of varying thickness 9 mm, 9.6 mm and 12 mm by using a single shot solid carbide step drill K44. The drilling is performed from lower to higher feed rate and cutting speed to investigate the hole quality, bottom top edge delamination, fiber breakages and local cracks. The work performed shows that a proper combination of tool geometry, cutting speed and feed rate can help to reduce the occurrence of delamination.

Improvement of bio-oil yield and quality in co-pyrolysis of corncobs and high density polyethylene in a fixed bed reactor at low heating rate

NASA Astrophysics Data System (ADS)

Supramono, D.; Lusiani, S.

2016-11-01

Over the past few decades, interest in developing biomass-derived fuel has been increasing rapidly due to the decrease in fossil fuel reserves. Bio-oil produced by biomass pyrolysis however contains high oxygen compounds resulting in low calorific-value fuel and therefore requiring upgrading. In co-pyrolysis of the feed blend of plastics of High Density Polyethylene (HDPE) and biomass of com cob particles, at some compositions free radicals from plastic decomposition containing more hydrogen radicals are able to bond oxygen radicals originating from biomass to reduce oxygenate compounds in the bio-oil thus increasing bio-oil quality. This phenomenon is usually called synergetic effect. In addition to that, the pattern of heating of the feed blend in the pyrolysis reactor is predicted to affect biooil quality and yield. In a batch reactor, co-pyrolysis of corncobs and HDPE requires low heating rate to reach a peak temperature at temperature rise period followed by heating for some time at peak temperature called holding time at constant temperature period. No research has been carried out to investigate how long holding time is set in co-pyrolysis of plastic and biomass to obtain high yield of bio-oil. Holding time may affect either crosslinking of free radicals in gas phase, which increases char product, or secondary pyrolysis in the gas phase, which increases non-condensable gas in the gas phase of pyrolysis reactor, both of which reduce bio-oil yield. Therefore, holding time of co-pyrolysis affects the mass rate of bio-oil formation as the pyrolysis proceeds and quality of the bio-oil. In the present work, effects of holding time on the yield and quality of bio-oil have been investigated using horizontal fixed bed of the feed blends at heating rate of 5°C, peak temperature of 500°C and N2 flow rate of 700 ml/minute. Holding time was varied from 0 to 70 minutes with 10 minutes interval. To investigate the effects of holding time, the composition of HDPE in the feed blend was varied 0, 50 and 100%, while the synergetic effect was investigated by varying the composition of HDPE in the feed blend 0, 25, 50, 75, and 100%. The results show that synergetic effect for non-oxygenate compound production started to work at 63% HDPE in the feed blend and beyond. It was observed that extension of holding time exceeding 0 minutes allowed increase ofbio-oil production rate followed reduction of the rate. Pyrolysis ofboth the corncob feed and the feed blend containing 50% HDPE equally reached maximum bio-oil production rate at holding time of 50 minutes, while that of HDPE feed at 30 minutes. The result pertaining to holding time indicates that biomass in the feed blend governs crosslinking - secondary pyrolysis in the co-pyrolysis.

Factors affecting cleanup of exhaust gases from a pressurized, fluidized-bed coal combustor

NASA Technical Reports Server (NTRS)

Rollbuhler, R. J.; Kobak, J. A.

1980-01-01

The cleanup of effluent gases from the fluidized-bed combustion of coal is examined. Testing conditions include the type and feed rate of the coal and the sulfur sorbent, the coal-sorbent ratio, the coal-combustion air ratio, the depth of the reactor fluidizing bed, and the technique used to physically remove fly ash from the reactor effluent gases. Tests reveal that the particulate loading matter in the effluent gases is a function not only of the reactor-bed surface gas velocity, but also of the type of coal being burnt and the time the bed is operating. At least 95 percent of the fly ash particules in the effluent gas are removed by using a gas-solids separator under controlled operating conditions. Gaseous pollutants in the effluent (nitrogen and sulfur oxides) are held within the proposed Federal limits by controlling the reactor operating conditions and the type and quantity of sorbent material.

Magma degassing triggered by static decompression at Kīlauea Volcano, Hawai‘i

USGS Publications Warehouse

Poland, Michael P.; Jeff, Sutton A.; Gerlach, Terrence M.

2009-01-01

During mid-June 2007, the summit of Kīlauea Volcano, Hawai‘i, deflated rapidly as magma drained from the subsurface to feed an east rift zone intrusion and eruption. Coincident with the deflation, summit SO2 emission rates rose by a factor of four before decaying to background levels over several weeks. We propose that SO2 release was triggered by static decompression caused by magma withdrawal from Kīlauea's shallow summit reservoir. Models of the deflation suggest a pressure drop of 0.5–3 MPa, which is sufficient to trigger exsolution of the observed excess SO2 from a relatively small volume of magma at the modeled source depth beneath Kīlauea's summit. Static decompression may also explain other episodes of deflation accompanied by heightened gas emission, including the precursory phases of Kīlauea's 2008 summit eruption. Hazards associated with unexpected volcanic gas emission argue for increased awareness of magma reservoir pressure fluctuations.

Cadmium removal in a biosorption column

DOE Office of Scientific and Technical Information (OSTI.GOV)

Volesky, B.; Prasetyo, I.

New biosorbent material derived from a ubiquitous brown marine alga Ascophyllum nodosum has been examined in packed-bed flow-through sorption columns. It effectively removed 10 mg/L of cadmium down to 1.5 ppb levels in the effluent, representing 99.985% removal. The experimental methodology used was based on the early Bohart and Adams sorption model, resulting in quantitative determination of the characteristic process parameters which can be used for performance comparison and process design. An average metal loading of the biosorbent (N[sub 0]) determined was 30 mg Cd/g, corresponding closely to that observed for the batch equilibrium metal concentration of 10 mg Cd/L.more » The critical bed depth (D[sub min]) for the potable water effluent quality standard varied with the column feed flow rate from 20 to 50 cm. The sorption column mass transfer and dispersion coefficients were determined, which are also required for solving the sorption model equations.« less

Effect of fermented moist feed on performance, gut bacteria and gut histo-morphology in broilers.

PubMed

Missotten, J A; Michiels, J; Dierick, N; Ovyn, A; Akbarian, A; De Smet, S

2013-01-01

1. Fermented feed has been shown to be beneficial in pig nutrition as a tool to reduce gut microbial disorders. Experiments with fermented feed in poultry are scarce, probably because of the belief that wet feed is less suitable for this species and causes wet litter. 2. A total of 280 one-d-old Ross 308 chickens were used in a completely randomised design with two dietary treatments (7 replicates of 20 birds/treatment); air-dry feed versus the same feed in moist form (water:feed ratio of 1.3:1, on a weight basis), inoculated with Lactobacillus plantarum NCIMB 40087 (9 log10 CFU/kg feed) and batch-fermented for 48 h at 26°C. The birds were given starter (d 0-13), grower (d 4-26) and finisher (d 27-39) diets ad libitum. At the end of the grower and finisher period, two birds per pen were removed to sample intestinal contents for cultivating bacteria and intestinal tissue to determine villus height and crypt depth. 3. Fermented moist feed (FMF) batches showed good characteristics, with a pH between 3.9 and 4.4 and DL-lactic acid between 137 and 286 mmol/l. Daily feed intake and gain were reduced considerably in the FMF group in the starter (-40 and -44%, respectively) and grower (-23 and -16%) period, though in the finisher period these birds performed better, with an improved feed utilisation. Concomitant with the latter, villus height at the mid-jejunum and mid-ileum on d 39 was higher (+22.6% and +16.0%). Significantly more Lactobacilli and less coliforms were found in the foregut and less Streptococci in ileum and caeca of birds given FMF. 4. This trial showed that FMF was detrimental for early bird growth but affected beneficially feed efficiency, the composition of the gut bacteria and villus height in the small intestine in the finisher period in broilers.

Micro ecosystems from feed industry surfaces: a survival and biofilm study of Salmonella versus host resident flora strains.

PubMed

Habimana, Olivier; Møretrø, Trond; Langsrud, Solveig; Vestby, Lene K; Nesse, Live L; Heir, Even

2010-11-02

The presence of Salmonella enterica serovars in feed ingredients, products and processing facilities is a well recognized problem worldwide. In Norwegian feed factories, strict control measures are implemented to avoid establishment and spreading of Salmonella throughout the processing chain. There is limited knowledge on the presence and survival of the resident microflora in feed production plants. Information on interactions between Salmonella and other bacteria in feed production plants and how they affect survival and biofilm formation of Salmonella is also limited. The aim of this study was to identify resident microbiota found in feed production environments, and to compare the survival of resident flora strains and Salmonella to stress factors typically found in feed processing environments. Moreover, the role of dominant resident flora strains in the biofilm development of Salmonella was determined. Surface microflora characterization from two feed productions plants, by means of 16 S rDNA sequencing, revealed a wide diversity of bacteria. Survival, disinfection and biofilm formation experiments were conducted on selected dominant resident flora strains and Salmonella. Results showed higher survival properties by resident flora isolates for desiccation, and disinfection compared to Salmonella isolates. Dual-species biofilms favored Salmonella growth compared to Salmonella in mono-species biofilms, with biovolume increases of 2.8-fold and 3.2-fold in the presence of Staphylococcus and Pseudomonas, respectively. These results offer an overview of the microflora composition found in feed industry processing environments, their survival under relevant stresses and their potential effect on biofilm formation in the presence of Salmonella. Eliminating the establishment of resident flora isolates in feed industry surfaces is therefore of interest for impeding conditions for Salmonella colonization and growth on feed industry surfaces. In-depth investigations are still needed to determine whether resident flora has a definite role in the persistence of Salmonella in feed processing environments.

Semantic Provisioning of Children's Food: Commerce, Care and Maternal Practice

ERIC Educational Resources Information Center

Cook, Daniel Thomas

2009-01-01

Drawing upon in-depth interviews with mothers in the US about feeding their young children, this article examines how consumer culture--broadly construed--constitutes part of the indispensable context of mothering practices. The argument put forward is that mothers not only provide food and sustenance for their children, but necessarily encounter,…

The transition from intermittent to continuous bed-load transport arises from merger of "bursty" transport events

NASA Astrophysics Data System (ADS)

Lee, D. B.; Jerolmack, D. J.

2017-12-01

Bed-load transport is notoriously unpredictable, in part due to stochastic fluctuations in grain entrainment and deposition. A general statistical mechanical framework has been proposed by Furbish and colleagues to formally derive average bed-load flux from grain-scale motion, and its application requires an intimate understanding of the probabilistic motion of individual grains. Recent work by Ancey et al. suggests that, near threshold, particles are entrained collectively. If so, understanding the scales of correlation is a necessary step to complete the probabilistic framework describing bed-load flux. We perform a series of experiments in a steep-sloped channel that directly quantifies fluctuations in grain motion as a function of the feed rate of particles (marbles). As the feed rate is increased, the necessary averaging time is decreased (i.e. transport grows less variable in time). Collective grain motion is defined as spatially clustered movement of several grains at once. We find that entrainment of particles is generally collective, but that these entrained particles deposit independently of each other. The size distribution of collective motion events follows an exponential decay that is consistent across sediment feed rates. To first order, changing feed rate does not change the kinematics of mobile grains, just the frequency of motion. For transport within a given region of the bed, we show that the total displacement of all entrained grains is proportional to the kinetic energy deposited into the bed by impacting grains. Individual grain-bed impacts are the likely cause of both collective and individual grain entrainment. The picture that emerges is similar to generic avalanching dynamics in sandpiles: "avalanches" (collective entrainment events) of a characteristic size relax with a characteristic timescale regardless of feed rate, but the frequency of avalanches increases in proportion to the feed rate. At high enough feed rates the avalanches merge, leading to progressively smoother and continuous transport. As most bed-load transport occurs in the intermittent regime, the length scale of collective entrainment should be considered a fundamental addition to a probabilistic framework that hopes to infer flux from grain motion.

Structural and functional diversity of Nematoda in relation with environmental variables in the Setúbal and Cascais canyons, Western Iberian Margin

NASA Astrophysics Data System (ADS)

Ingels, Jeroen; Billett, David S. M.; Kiriakoulakis, Konstadinos; Wolff, George A.; Vanreusel, Ann

2011-12-01

Samples collected at two different depths (ca. 3200 and ca. 4200 m) in the Setúbal and Cascais canyons off the Portuguese coast, during the HERMES RRS Charles Darwin cruise CD179, were analysed for (1) sediment biogeochemistry (TOC, TN) and (2) composition, and structural and trophic diversity of nematode communities. Multivariate PERMANOVA analysis on the nematode community data revealed differences between sediment layers that were greater than differences between canyons, water depths, and stations. This suggests that biogeochemical gradients along the vertical sediment profile are crucial in determining nematode community structure. The interaction between canyon conditions and the nematode community is illustrated by biogeochemical patterns in the sediment and the prevalence of nematode genera that are able to persist in disturbed sediments. Trophic analysis of the nematode community indicated that non-selective deposit feeders are dominant, presumably because of their non-selective feeding behaviour compared to other feeding types, which gives them a competitive advantage in exploiting lower-quality food resources. This study presents a preliminary conceptual scheme for interactions between canyon conditions and the resident fauna.

Project Hotspot: Linear accumulation rates of late Cenozoic basalt at Kimama, Idaho, and implications for crustal strain and subsidence rates of the central Snake River Plain

NASA Astrophysics Data System (ADS)

Rodgers, D. W.; Potter, K. E.; Shervais, J. W.; Champion, D. E.; Duncan, R. A.

2013-12-01

Project Hotspot's Kimama drill hole on the Snake River Plain, Idaho recovered a 1912 m thick section of basalt core that ranges in age from ~700 ka to at least 6.14 Ma, based on five 40Ar/39Ar analyses and twenty paleomagnetic age assignments. Fifty-four flow groups comprising 510 individual flows were defined, yielding an average recurrence interval of ~11,400 years between flows. Age-depth analysis indicate that, over thicknesses >150 m and age spans >500 k.y., accumulation rates were constant at 30 m/100 k.y. The existence and persistence of this linear accumulation rate for greater than 5 m.y. documents an external tectonic control on eruption dynamics. One conceptual model relates accumulation rates to horizontal crustal strain, such that far-field extension rate controls the periodicity of dikes that feed basalt flows. In this model, each of the 54 flow groups would have a deep-seated, relatively wide (1-10m) dike that branches upward into a network of narrow (10-100 cm) dikes feeding individual lava flows. Assuming an east-west lateral lava flow extent of up to 50 km, the Kimama data record a steady-state crustal strain rate of 10-9 to 10-10 y-1. This rate is comparable to modern, decadal strain rates measured with GPS in the adjacent Basin & Range province, but exceeds decadal strain rates of zero measured in the eastern Snake River Plain. Linear accumulation rates also provide insight into basalt subsidence history. In this model, the middle-upper crust subsides due to the added weight of lava flows, the added weight of mid-crustal sills/dikes, and thermal contraction in the wake of the Yellowstone hot spot. Isostatic compensation would occur in the (nearly) molten lower crust. Assuming constant surface elevation and a basalt density of 2.6 g/cm3, the lava flow weight would account for 87% of the burial through time, yielding a steady-state "tectonic" subsidence rate of 4 m/100 k.y. attributed to the driving forces of mid-crustal injection and/or thermal contraction. An even faster tectonic rate is likely, given the evidence for decreasing surface elevation through time. We propose that tectonic subsidence was a necessary condition for maintaining basalt eruption over such a long duration -- it would inhibit the growth of a topographic plateau and maintain an appropriate level of neutral buoyancy for the periodically ascending mantle-derived magma

Relationship Between Metabolic Rate and Sea Depth in Bivalves and Gastropods

NASA Astrophysics Data System (ADS)

Ruiz, B. R.; Shih, B.; Heim, N.; Payne, J.

2016-12-01

The purpose of this study was to find and observe trends in the metabolic rate of bivalves and gastropod in regards to sea depth in order to see if all organisms follow a general trend for metabolism and to provide data to help future conservation efforts of these keystone organisms. Using geographic data produced by McClain et. al (2012) and body size data from Heim et. al (2015), the metabolic rate and sea depth data were plotted using the `R statistical software'. The Pearson correlation test was performed on each respective graph. Deep sea mollusks were considered those that resided at a water depth of 500 meters or deeper while shallow mollusks resided at a depth less than 500 meters. The gastropods showed positive correlations in the relationship between metabolic rate and ocean depth while bivalves showed a negative trend. When the metabolic rate versus minimum ocean depth was graphed, the graphs for deep bivalves and shallow gastropods returned bad p-values. From this data, it can be seen that water depth and metabolic rate have relationships, although different molluscan classes are adapted to their environments in different ways, as seen by the differences in the relationships between metabolic rates and ocean depth of the gastropods and bivalves. The results indicated that there is a general negative trend between metabolic rate and ocean depth of bivalves, and a positive relationship for gastropods. The difference in relationship in gastropods is thought to be attributed to the size trends of gastropods as they live in deeper waters, which is that gastropods increase in size across the bathyal region, and decrease as gastropods approach the extremely deep water. As displayed by the two different metabolic trends, this study shows the different ways molluscan classes have adapted to different evolutionary selection pressures.

21 CFR 558.115 - Carbadox.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of feed; plus oxytetracycline, 10 milligrams per pound of body weight. (i) Indications for use. For... oxytetracycline, for treatment of bacterial pneumonia caused by Pasteurella multocida susceptible to oxytetracycline; and for increased rate of weight gain and improved feed efficiency. (ii) Limitations. Feed...

Recycling of rare earth particle by mini-hydrocyclones.

PubMed

Yu, Jian-Feng; Fu, Jian; Cheng, Hao; Cui, Zhengwei

2017-03-01

Mini-hydrocyclones were applied to separate the fine rare earth particles from the suspensions. The effects of the flow rate, split ratio, and feed concentration on the total separation efficiency and grade separation efficiency were studied. The combined effects of the flow rate (1200-1600L/h), split ratio (20-60%) and concentration (0.6-1.0wt%) on the total separation efficiency in mini-hydrocyclones were investigated using a response surface methodology. The optimum operating parameters for a total separation efficiency of 92.5% were: feed flow rate=1406L/h, split ratio=20%, and feed concentration=1wt%. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dietary Administration of Bacillus subtilis Enhances Growth Performance, Immune Response and Disease Resistance in Cherry Valley Ducks

PubMed Central

Guo, Mengjiao; Hao, Guangen; Wang, Baohua; Li, Ning; Li, Rong; Wei, Liangmeng; Chai, Tongjie

2016-01-01

Given the promising results of applying Bacillus subtilis (B.subtilis) as a probiotic in both humans and animals, the aim of this study was to systematically investigate the effects of B. subtilis on growth performance, immune response and disease resistance in Cherry Valley ducks. At 28 d post-hatch (dph), ducks fed a diet with B. subtilis weighed significantly more, had higher relative immune organ weights (e.g., bursa of Fabricius, thymus, and spleen), and exhibited greater villus heights, villus height to crypt depth ratios (duodenum and jejunum), and shallower crypt depths in the duodenum than controls fed a normal diet (p < 0.05). Moreover, the major pro-inflammatory factors and antiviral proteins, as measured in the thymus and the spleen, were higher at 28 dph in ducks fed probiotics than those of 14 dph. After 28 d of feeding, the ducks were challenged with Escherichia coli (E. coli) and novel duck reovirus (NDRV), and ducks fed B. subtilis achieved survival rates of 43.3 and 100%, respectively, which were significantly greater than the control group's 20 and 83.3%. Altogether, diets with B. subtilis can improve Cherry Valley ducks' growth performance, innate immune response, and resistance against E. coli and NDRV. PMID:28008328

Positron annihilation lifetime and Doppler broadening spectroscopy at the ELBE facility

NASA Astrophysics Data System (ADS)

Wagner, Andreas; Butterling, Maik; Liedke, Maciej O.; Potzger, Kay; Krause-Rehberg, Reinhard

2018-05-01

The Helmholtz-Zentrum Dresden-Rossendorf operates a superconducting linear accelerator for electrons with energies up to 35 MeV and average beam currents up to 1.6 mA with bunch charges up to 120 pC. The electron beam is employed to produce several secondary beams including X-rays from bremsstrahlung production, coherent IR light in a Free Electron Laser, superradiant THz radiation, neutrons, and positrons. The secondary positron beam after moderation feeds the Monoenergetic Positron Source (MePS) where positron annihilation lifetime (PALS) and positron annihilation Doppler-broadening experiments in materials science are performed. The adjustable repetition rate of the continuous-wave electron beams allows matching of the pulse separation to the positron lifetime in the sample under study. The energy of the positron beam can be set between 0.5 keV and 20 keV to perform depth resolved defect spectroscopy and porosity studies especially for thin films. Bulk materials, fluids, gases, and even radioactive samples can be studied at the unique Gamma-induced Positron Source (GiPS) where an intense bremsstrahlung source generates positrons directly inside the material under study. A 22Na-based monoenergetic positron beam serves for offline experiments and additional depth-resolved Doppler-broadening studies complementing both accelerator-based sources.

Determination of the cutting forces regression functions for milling machining of the X105CrMo17 material

NASA Astrophysics Data System (ADS)

Popovici, T. D.; Dijmărescu, M. R.

2017-08-01

The aim of the research presented in this paper is to determine a cutting force prediction model for milling machining of the X105CrMo17 stainless steel. The analysed material is a martensitic stainless steel which, due to the high Carbon content (∼1%) and Chromium (∼17%), has high hardness and good corrosion resistance characteristics. This material is used for the steel structures parts which are subject of wear in corrosive environments, for making valve seats, bearings, various types of cutters, high hardness bushings, casting shells and nozzles, measuring instruments, etc. The paper is structured into three main parts in accordance to the considered research program; they are preceded by an introduction and followed by relevant conclusions. In the first part, for a more detailed knowledge of the material characteristics, a quality and quantity micro-analysis X-ray and a spectral analysis were performed. The second part presents the physical experiment in terms of input, necessary means, process and registration of the experimental data. In the third part, the experimental data is analysed and the cutting force model is developed in terms of the cutting regime parameters such as cutting speed, feed rate, axial depth and radial depth.

Effects of feed consumption rate of beef cattle offered a diet supplemented with nitrate ad libitum or restrictively on potential toxicity of nitrate.

PubMed

Lee, C; Araujo, R C; Koenig, K M; Beauchemin, K A

2015-10-01

The objective of the study was to investigate the effects of feed consumption rate on potential toxicity, rumen fermentation, and eating behavior when beef heifers were fed a diet supplemented with nitrate (NI). Twelve ruminally cannulated heifers (827 ± 65.5 kg BW) were used in a randomized complete block design. The experiment consisted of 10-d adaptation, 8-d urea-feeding, and 3-d nitrate-feeding periods. All heifers were fed a diet supplemented with urea (UR) during the adaptation and urea-feeding periods, whereas the NI diet (1.09% NO in dietary DM) was fed during the nitrate-feeding period. After adaptation, heifers were randomly assigned to ad libitum or restrictive feeding (about 80% of ad libitum intake) for the urea- and nitrate-feeding periods. Ad libitum DMI decreased (14.1 vs. 15.1 kg/d; < 0.01) when heifers were fed the NI diet compared with the UR diet. The amount of feed consumed increased ( < 0.01) at 0 to 3 h and decreased ( ≤ 0.03) at 3 to 24 h for restrictive vs. ad libitum feeding of both the UR and NI diets. Compared to the UR diet, the NI diet decreased ( < 0.01) feed consumption at 0 to 3 h and increased ( < 0.02) feed consumption at 3 to 24 h (except feed consumption at 9 to 12 h; = 0.90), indicating nitrate feeding changed the consumption pattern (a more even distribution of feed intake over the day). The increased feed consumption from 0 to 3 h after feeding the NI diet restrictively vs. ad libitum numerically decreased ( = 0.11) rumen pH and numerically or significantly increased ( = 0.01 to 0.28) rumen ammonia, NO, and NO; blood methemoglobin; and plasma NO and NO at 3 h. Regression analysis indicated that increased feed consumption (0 to 3 h) exponentially elevated ( < 0.01; = 0.75) blood methemoglobin, and plasma NO + NO among other rumen and blood variables had the greatest correlation (sigmoid response; < 0.01, = 0.47) with feed consumption (0 to 3 h). Particle size distribution of orts was partially altered ( = 0.02 to 0.40) when the NI diet was fed compared with the UR diet. During the nitrate-feeding period, the nitrate content of orts on d 2 and 3 was greater ( = 0.02) than that on d 1. In conclusion, the increased consumption rate of a diet supplemented with nitrate was an important factor influencing risk of nitrate toxicity based on blood methemoglobin and plasma NO. In addition, the pattern of daily feed consumption was altered by nitrate (creating a "nibbling" pattern of eating) in beef heifers.

Ameliorative potentials of cocoyam (Colocasia esculenta L.) and unripe plantain (Musa paradisiaca L.) on the relative tissue weights of streptozotocin-induced diabetic rats.

PubMed

Eleazu, C O; Iroaganachi, M; Eleazu, K C

2013-01-01

To investigate the ameliorating potentials of cocoyam (Colocasia esculenta L.) and unripe plantain (Musa paradisiaca L.) incorporated feeds on the renal and liver growths of diabetic rats, induced with 55 and 65 mg/kg body weight of Streptozotocin. The blood glucose level of the rats was measured with a glucometer, the protein and glucose and specific gravity (SPGR) in the urine samples of the rats were measured using urine assay strips and urinometer respectively. The chemical composition and antioxidant screening of the test feeds were carried out using standard techniques. Administration of the test feeds for 21 days to the diabetic rats of groups 4 and 5, resulted in 58.75% and 38.13% decreases in hyperglycemia and amelioration of their elevated urinary protein, glucose, SPGR, and relative kidney weights. The diabetic rats administered cocoyam incorporated feeds, had 2.71% and 19.52% increases in weight and growth rates, the diabetic rats administered unripe plantain incorporated feeds had 5.12% and 29.52% decreases in weight and growth rates while the diabetic control rats had 28.69%, 29.46%, 248.9% and 250.14% decreases in weights and growth rates. The cocoyam incorporated feeds contained higher antioxidants, minerals and phytochemicals except alkaloids than unripe plantain feed. Cocoyam and unripe plantain could be useful in the management of diabetic nephropathy.

Oral support measures used in feeding the preterm infant.

PubMed

Hill, A S; Kurkowski, T B; Garcia, J

2000-01-01

Evidence that bottle-feeding is a stressor for inefficient preterm infant feeders is seen in untoward changes in the physiologic system and nutritive sucking patterns. To determine whether a therapeutic technique, oral support (cheek and jaw support), would influence the cardiopulmonary functions or nutritive sucking patterns of preterm infants during feeding. A crossover repeated measures design was used with 20 preterm infants for a total of 40 bottle-feeding sessions. The Whitney Mercury Strain Gage and a Nonin Cardiopulmonary monitor were used to observe sucking characteristics and cardiopulmonary functions during feeding. Infants not receiving support paused longer (F= 6.37, df= 5, p < .001) and more frequently (F= 5.01, df= 5, p < .001) than supported infants. There were no differences between the groups in the number of sucks and bursts, the burst duration, the stability of the total sucking activity, or the rate of sucking. Oxygen saturation (SaO2) values, heart rate, and respiratory rate did not differ between the groups during feeding. Postfeeding SaO2 levels were lower than prefeeding levels for infants not receiving oral support (t= 0.96, df= 19, p= .03). Oral support provided stability for the jaw and fostered the return of the infant's prefeeding SaO2 values, but it did not interfere with cardiopulmonary function during feeding. Further research is needed to determine whether there is a cumulative effect of oral support, and whether it influences state behavior.

Principles and approach to developing mammalian cell culture media for high cell density perfusion process leveraging established fed-batch media.

PubMed

Lin, Henry; Leighty, Robert Woodrow; Godfrey, Scott; Wang, Samantha Boran

2017-07-01

Perfusion medium was successfully developed based on our fed-batch platform basal and feed media. A systematic development approach was undertaken by first optimizing the ratios of fed-batch basal and feed media followed by targeted removal of unnecessary and redundant components. With this reduction in components, the medium could then be further concentrated by 2× to increase medium depth. The medium osmolality was also optimized where we found ∼360 mOsm/kg was desirable resulting in a residual culture osmolality of ∼300 mOsm/kg for our cell lines. Further building on this, the amino acids Q, E, N, and D were rebalanced to reduce lactate and ammonium levels, and increase the cell-specific productivity without compromising on cell viability while leaving viable cell density largely unaffected. Further modifications were also made by increasing certain important vitamin and lipid concentrations, while eliminating other unnecessary vitamins. Overall, an effective perfusion medium was developed with all components remaining in the formulation understood to be important and their concentrations increased to improve medium depth. The critical cell-specific perfusion rate using this medium was then established for a cell line of interest to be 0.075 nL/cell-day yielding 1.2 g/L-day at steady state. This perfusion process was then successfully scaled up to a 100 L single-use bioreactor with an ATF6 demonstrating similar performance as a 2 L bioreactor with an ATF2. Large volume handling challenges in our fed-batch facility were overcome by developing a liquid medium version of the powder medium product contained in custom totes for plug-and-play use with the bioreactor. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:891-901, 2017. © 2017 American Institute of Chemical Engineers.

Intervention to promote exclusive breast-feeding for the first 6 months of life in a high HIV prevalence area.

PubMed

Bland, Ruth M; Little, Kirsty E; Coovadia, Hoosen M; Coutsoudis, Anna; Rollins, Nigel C; Newell, Marie-Louise

2008-04-23

We report on a nonrandomized intervention cohort study to increase exclusive breast-feeding rates for 6 months after delivery in HIV-positive and HIV-negative women in KwaZulu-Natal, South Africa. Lay counselors visited women to support exclusive breast-feeding: four times antenatally, four times in the first 2 weeks postpartum and then fortnightly to 6 months. Daily feeding practices were collected at weekly intervals by separate field workers. Cumulative exclusive breast-feeding rates from birth were assessed by Kaplan-Meier analysis and association with maternal and infant variables was quantified in a Cox regression analysis. One thousand, two hundred and nineteen infants of HIV-negative and 1217 infants of HIV-positive women were followed postnatally. Median duration of exclusive breast-feeding was 177 (R = 1-180; interquartile range: 150-180) and 175 days (R = 1-180; interquartile range: 137-180) in HIV-negative and HIV-positive women, respectively. Using 24-h recall, exclusive breast-feeding rates at 3 and 5 months were 83.1 and 76.5%, respectively, in HIV-negative women and 72.5 and 66.7%, respectively, in HIV-positive women. Using the most stringent cumulative data, 45% of HIV-negative and 40% of HIV-positive women adhered to exclusive breast-feeding for 6 months. Counseling visits were strongly associated with adherence to cumulative exclusive breast-feeding at 4 months, those who had received the scheduled number of visits were more than twice as likely to still be exclusively breast-feeding than those who had not (HIV-negative women: adjusted odds ratio: 2.07, 95% confidence interval: 1.56-2.74, P < 0.0001; HIV-positive women: adjusted odds ratio: 2.86, 95% CI 2.13-3.83, P < 0.0001). It is feasible to promote and sustain exclusive breast-feeding for 6 months in both HIV-positive and HIV-negative women, with home support from well trained lay counselors.

SAR studies directed toward the pyridine moiety of the sap-feeding insecticide sulfoxaflor (Isoclast™ active).

PubMed

Loso, Michael R; Benko, Zoltan; Buysse, Ann; Johnson, Timothy C; Nugent, Benjamin M; Rogers, Richard B; Sparks, Thomas C; Wang, Nick X; Watson, Gerald B; Zhu, Yuanming

2016-02-01

Sap-feeding insect pests constitute a major insect pest complex that includes a range of aphids, whiteflies, planthoppers and other insect species. Sulfoxaflor (Isoclast™ active), a new sulfoximine class insecticide, targets sap-feeding insect pests including those resistant to many other classes of insecticides. A structure activity relationship (SAR) investigation of the sulfoximine insecticides revealed the importance of a 3-pyridyl ring and a methyl substituent on the methylene bridge linking the pyridine and the sulfoximine moiety to achieving strong Myzus persicae activity. A more in depth QSAR investigation of pyridine ring substituents revealed a strong correlation with the calculated logoctanol/water partition coefficient (SlogP). Model development resulted in a highly predictive model for a set of 18 sulfoximines including sulfoxaflor. The model is consistent with and helps explain the highly optimized pyridine substitution pattern for sulfoxaflor. Copyright © 2015 Elsevier Ltd. All rights reserved.

Directional radiation of Babinet-inverted optical nanoantenna integrated with plasmonic waveguide

NASA Astrophysics Data System (ADS)

Kim, Jineun; Roh, Young-Geun; Cheon, Sangmo; Jeong Kim, Un; Hwang, Sung Woo; Park, Yeonsang; Lee, Chang-Won

2015-07-01

We present a Babinet-inverted optical nanoantenna integrated with a plasmonic waveguide. Using an integrated nanoantenna, we can couple the plasmon guide mode in a metal-insulator-metal (MIM) structure into the resonant antenna feed directly. The resonantly excited feed slot then radiates to free space and generates a magnetic dipole-like far-field pattern. The coupling efficiency of the integrated nanoantenna is calculated as being approximately 19% using a three-dimensional finite-difference time-domain (3D FDTD) simulation. By adding an auxiliary groove structure along with the feed, the radiation direction can be controlled similar to an optical Yagi-Uda antenna. We also determine, both theoretically and experimentally, that groove depth plays a significant role to function groove structure as a reflector or a director. The demonstrated Babinet-inverted optical nanoantenna integrated with a plasmonic waveguide can be used as a “plasmonic via” in plasmonic nanocircuits.

Directional radiation of Babinet-inverted optical nanoantenna integrated with plasmonic waveguide.

PubMed

Kim, Jineun; Roh, Young-Geun; Cheon, Sangmo; Kim, Un Jeong; Hwang, Sung Woo; Park, Yeonsang; Lee, Chang-Won

2015-07-02

We present a Babinet-inverted optical nanoantenna integrated with a plasmonic waveguide. Using an integrated nanoantenna, we can couple the plasmon guide mode in a metal-insulator-metal (MIM) structure into the resonant antenna feed directly. The resonantly excited feed slot then radiates to free space and generates a magnetic dipole-like far-field pattern. The coupling efficiency of the integrated nanoantenna is calculated as being approximately 19% using a three-dimensional finite-difference time-domain (3D FDTD) simulation. By adding an auxiliary groove structure along with the feed, the radiation direction can be controlled similar to an optical Yagi-Uda antenna. We also determine, both theoretically and experimentally, that groove depth plays a significant role to function groove structure as a reflector or a director. The demonstrated Babinet-inverted optical nanoantenna integrated with a plasmonic waveguide can be used as a "plasmonic via" in plasmonic nanocircuits.

Directional radiation of Babinet-inverted optical nanoantenna integrated with plasmonic waveguide

PubMed Central

Kim, Jineun; Roh, Young-Geun; Cheon, Sangmo; Jeong Kim, Un; Hwang, Sung Woo; Park, Yeonsang; Lee, Chang-Won

2015-01-01

We present a Babinet-inverted optical nanoantenna integrated with a plasmonic waveguide. Using an integrated nanoantenna, we can couple the plasmon guide mode in a metal-insulator-metal (MIM) structure into the resonant antenna feed directly. The resonantly excited feed slot then radiates to free space and generates a magnetic dipole-like far-field pattern. The coupling efficiency of the integrated nanoantenna is calculated as being approximately 19% using a three-dimensional finite-difference time-domain (3D FDTD) simulation. By adding an auxiliary groove structure along with the feed, the radiation direction can be controlled similar to an optical Yagi-Uda antenna. We also determine, both theoretically and experimentally, that groove depth plays a significant role to function groove structure as a reflector or a director. The demonstrated Babinet-inverted optical nanoantenna integrated with a plasmonic waveguide can be used as a “plasmonic via” in plasmonic nanocircuits. PMID:26135115

A global comparative analysis of the feeding dynamics and environmental conditions of larval tunas, mackerels, and billfishes

NASA Astrophysics Data System (ADS)

Llopiz, Joel K.; Hobday, Alistair J.

2015-03-01

Scombroid fishes, including tunas, mackerels, and billfishes, constitute some of the most important fisheries in lower latitudes around the world. Though the early life stages of these taxa are relatively well-studied, worldwide patterns in larval feeding dynamics and how such patterns relate to environmental conditions are poorly resolved. We present a synthesis of feeding success (i.e. feeding incidences) and diets of larval scombroids from around the world, and relate these results to water column and sea surface properties for the several regions in which larval feeding studies have been conducted. Feeding success of larval tunas was shown to be distinctly different among regions. In some locations (the Straits of Florida and the Mediterranean Sea), nearly no larvae had empty guts, whereas in other locations (the Gulf of California and off NW Australia) 40-60% of larvae were empty. Diets were consistently narrow in each region (dominated by cyclopoid copepods, appendicularians, nauplii, and other fish larvae), and were usually, but not always, similar for a given scombroid taxon among regions (though diets differed among taxa). Larval habitat conditions were often similar among the 9 regions examined, but some clear differences included low levels of eddy kinetic energy and cooler waters (at the surface and at depth) in the Mediterranean, and lower chlorophyll concentrations around the Nansei Islands, Japan and off NW Australia where feeding success was low. When observed zooplankton abundances are also taken into account, the compiled results on feeding and environmental conditions indicate a bottom-up influence on feeding success. Moreover, the variability among regions highlights the potential for region-specific mechanisms regulating larval survival and, ultimately, levels of adult recruitment.

Determinants of infant feeding choices by Zambian mothers: a mixed quantitative and qualitative study.

PubMed

Chisenga, Molly; Siame, Joshua; Baisley, Kathy; Kasonka, Lackson; Filteau, Suzanne

2011-04-01

Choosing an infant feeding mode is complex for human immunodeficiency virus (HIV)-infected African women. We documented infant feeding choices by 811 mothers of infants aged less than 18 months enrolled in the Chilenje Infant Growth, Nutrition and Infection Study of fortified complementary or replacement foods. We also conducted 20 interviews and 4 focus group discussions among women and nurses to explore the issues in depth. Practices of most HIV-infected women did not closely follow national or international guidelines: 26% never initiated breastfeeding, and 55% were not breastfeeding by 6 months post partum. Women of lower socio-economic status and those not meeting criteria for safe replacement feeding were more likely to initiate breastfeeding, to continue longer and to stop at 6 months when provided with free food within the trial. Most HIV-negative women and women of unknown HIV status continued breastfeeding into the infant's second year, indicating limited 'spillover' of infant feeding messages designed for HIV-infected women into the uninfected population. Qualitative work indicated that the main factors affecting HIV-infected women's infant feeding decisions were the cost of formula, the advice of health workers, influence of relatives, stigma and difficulties with using an exclusive feeding mode. Rapidly changing international recommendations confused both mothers and nurses. Many HIV-infected women chose replacement feeding without meeting criteria to do this safely. Women were influenced by health workers but, for several reasons, found it difficult to follow their advice. The recently revised international HIV and infant feeding recommendations may make the counselling process simpler for health workers and makes following their advice easier for HIV-infected women. © 2010 Blackwell Publishing Ltd.

Humans and Deep Networks Largely Agree on Which Kinds of Variation Make Object Recognition Harder.

PubMed

Kheradpisheh, Saeed R; Ghodrati, Masoud; Ganjtabesh, Mohammad; Masquelier, Timothée

2016-01-01

View-invariant object recognition is a challenging problem that has attracted much attention among the psychology, neuroscience, and computer vision communities. Humans are notoriously good at it, even if some variations are presumably more difficult to handle than others (e.g., 3D rotations). Humans are thought to solve the problem through hierarchical processing along the ventral stream, which progressively extracts more and more invariant visual features. This feed-forward architecture has inspired a new generation of bio-inspired computer vision systems called deep convolutional neural networks (DCNN), which are currently the best models for object recognition in natural images. Here, for the first time, we systematically compared human feed-forward vision and DCNNs at view-invariant object recognition task using the same set of images and controlling the kinds of transformation (position, scale, rotation in plane, and rotation in depth) as well as their magnitude, which we call "variation level." We used four object categories: car, ship, motorcycle, and animal. In total, 89 human subjects participated in 10 experiments in which they had to discriminate between two or four categories after rapid presentation with backward masking. We also tested two recent DCNNs (proposed respectively by Hinton's group and Zisserman's group) on the same tasks. We found that humans and DCNNs largely agreed on the relative difficulties of each kind of variation: rotation in depth is by far the hardest transformation to handle, followed by scale, then rotation in plane, and finally position (much easier). This suggests that DCNNs would be reasonable models of human feed-forward vision. In addition, our results show that the variation levels in rotation in depth and scale strongly modulate both humans' and DCNNs' recognition performances. We thus argue that these variations should be controlled in the image datasets used in vision research.

Evaluation of Methods to Increase Light Under Ferry Terminals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanton, Susan L.; Thom, Ronald M.; Borde, Amy B.

2002-01-02

To address concerns of resource agencies about the potential impacts of ferry terminal expansion on valuable habitat functions and resource use of nearshore areas, the Pacific Northwest National Laboratory (PNNL), in partnership with the Washington State Department of Transportation (WSDOT), conducted field trials with off-the-shelf products that promote light passage through dock structures. These products included a SunTunnel, deck prisms, and a metal halide greenhouse light. Light measurements (photosynthetically active radiation, PAR) were also recorded beneath glass blocks and a metal grating installed at Clinton Ferry Terminal on Whidbey Island, WA. A review of other studies measuring the effects ofmore » dock shading and alternate dock materials was conducted. PAR measurements from this study were related to minimum requirements for eelgrass Zostera marina photosynthesis and to the known maximum photosynthetic ?saturation? rate for Z. marina. We also related PAR measurements to what we know about light effects on juvenile salmonid feeding and passage under overwater structures. Of the light technologies tested, the metal halide light, SunTunnel, glass blocks, and grating potentially provide enough light for eelgrass growth underneath a ferry terminal with similar construction to the Clinton Ferry Terminal. All of these technologies would potentially provide adequate light under conditions where eelgrass is located at its upper depth limit and a dock is close to the water surface. Light levels needed to allow fish to feed and to form schools are low (~ 1-2 mmol/m2/s), and much less than those required for photosynthesis. Our research indicates that installing any of the tested light products would likely maintain light levels under the dock above those required for active feeding by juvenile salmonids.« less

Utilization of shallow-water seagrass detritus by Carribbean deep-sea macrofauna: δ 13C evidence

NASA Astrophysics Data System (ADS)

Suchanek, Thomas H.; Williams, Susan L.; Ogden, John C.; Hubbard, Dennis K.; Gill, Ivan P.

1985-02-01

Three dives were made using the DSRV Alvin in the deep-sea basin north of St. Croix, Virgin Islands. Detrital seagrasses and macrofaunal distributions at 2455 to 3950 m depth were assessed quantitatively. Counts of the manatee grass Syringodium filiforme ( ca. 5 to 100 blades m -2) contrasted sharply with those of the turtle grass Thalassia testudinum ( ca. 0.1 to 2.0 blades m -2), reflecting an abundance proportional to previously reported export rates of the same species from Tague Bay, a nearby shallow source lagoon. Of the macrofaunal consumers that could potentially utilize this detrital nutrient source, three species of holothurians ( Mesothuria verrilli, Psychropotes semperiana, and Benthodytes linqua) and two species of sea urchins ( Hygrosoma petersi and Salencidaris profundi) were collected and/or observed. Gut content analyses revealed that all three holothurians deposit-feed on sediment and at least one species of sea urchin ( H. petersi) feeds almost exclusively on Syringodium. Carbon: nitrogen analyses of naturally occurring abyssal Thalassia detritus showed very low nitrogen content (0.21% N) and a high C:N ratio (214.8), thus yielding a loo nutritional value. Fresh Thalassia blades held in a litter bag experiment (by R. D. Turner) at 3950 m changed little in nitrogen content and C:N ratio after four years. A comparison was made of the stable carbon isotope ratios of 13C: 12C for abyssal seagrass detritus and other potential carbon sources with those for tissues from the holothurian and urchin consumers. The results indicate that a significant proportion of the nutrition of both groups is derived from detrital seagrasses either by direct consumption (sea urchins) or indirectly by deposit-feeding on sediments enriched by decomposed seagrasses (holothurians).

Predicting the impact of feed spacer modification on biofouling by hydraulic characterization and biofouling studies in membrane fouling simulators.

PubMed

Siddiqui, A; Lehmann, S; Bucs, Sz S; Fresquet, M; Fel, L; Prest, E I E C; Ogier, J; Schellenberg, C; van Loosdrecht, M C M; Kruithof, J C; Vrouwenvelder, J S

2017-03-01

Feed spacers are an essential part of spiral-wound reverse osmosis (RO) and nanofiltration (NF) membrane modules. Geometric modification of feed spacers is a potential option to reduce the impact of biofouling on the performance of membrane systems. The objective of this study was to evaluate the biofouling potential of two commercially available reference feed spacers and four modified feed spacers. The spacers were compared on hydraulic characterization and in biofouling studies with membrane fouling simulators (MFSs). The virgin feed spacer was characterized hydraulically by their resistance, measured in terms of feed channel pressure drop, performed by operating MFSs at varying feed water flow rates. Short-term (9 days) biofouling studies were carried out with nutrient dosage to the MFS feed water to accelerate the biofouling rate. Long-term (96 days) biofouling studies were done without nutrient dosage to the MFS feed water. Feed channel pressure drop was monitored and accumulation of active biomass was quantified by adenosine tri phosphate (ATP) determination. The six feed spacers were ranked on pressure drop (hydraulic characterization) and on biofouling impact (biofouling studies). Significantly different trends in hydraulic resistance and biofouling impact for the six feed spacers were observed. The same ranking for biofouling impact on the feed spacers was found for the (i) short-term biofouling study with nutrient dosage and the (ii) long-term biofouling study without nutrient dosage. The ranking for hydraulic resistance for six virgin feed spacers differed significantly from the ranking of the biofouling impact, indicating that hydraulic resistance of clean feed spacers does not predict the hydraulic resistance of biofouled feed spacers. Better geometric design of feed spacers can be a suitable approach to minimize impact of biofouling in spiral wound membrane systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

FEED FORWARD EQUATIONS.

DTIC Science & Technology

and feed forward stabilization) have been implemented. An on-mount gyro system consists of gyroscopes mounted on the radar antenna which sense...antenna motion and send compensating signals back to the antenna servo mechanism. Feed forward stabilization consists of determining antenna angular rates...caused by ships attitude changes, as measured by a stable platform (such as SINS), and feeding compensating signals back to the antenna servo

Comparison of synthetic membranes in the development of an in vitro feeding system for Dermanyssus gallinae.

PubMed

Harrington, D W J; Guy, J H; Robinson, K; Sparagano, O A E

2010-04-01

Although artificial feeding models for the poultry red mite (Dermanyssus gallinae) most frequently use biological membranes consisting of day-old chick skin, there are ethical considerations associated with the use of skin. The few studies reported in the literature that have investigated the use of synthetic membranes to feed D. gallinae in vitro have reported limited success. The current study describes an investigation into the use of synthetic membranes made from either Nescofilm or rayon and silicone, used either alone or in combination with different feather or skin extracts, as well as the use of capillary tubes. In all, 12 different treatments were used, and the feeding rate of D. gallinae was compared to that of day-old chick skin. Allowing mites to feed on a membrane consisting of Nescofilm with a skin extract resulted in the highest proportion of mites feeding (32.3%), which was not significantly different to the feeding rate of mites on day-old chick skin (38.8%). This study confirms that synthetic membranes can be used to feed D. gallinae artificially. Further optimization of the membrane and mite storage conditions is still necessary, but the study demonstrates a proof of concept.

Metabolic rates are significantly lower in abyssal Holothuroidea than in shallow-water Holothuroidea

PubMed Central

van Oevelen, Dick

2018-01-01

Recent analyses of metabolic rates in fishes, echinoderms, crustaceans and cephalopods have concluded that bathymetric declines in temperature- and mass-normalized metabolic rate do not result from resource-limitation (e.g. oxygen or food/chemical energy), decreasing temperature or increasing hydrostatic pressure. Instead, based on contrasting bathymetric patterns reported in the metabolic rates of visual and non-visual taxa, declining metabolic rate with depth is proposed to result from relaxation of selection for high locomotory capacity in visual predators as light diminishes. Here, we present metabolic rates of Holothuroidea, a non-visual benthic and benthopelagic echinoderm class, determined in situ at abyssal depths (greater than 4000 m depth). Mean temperature- and mass-normalized metabolic rate did not differ significantly between shallow-water (less than 200 m depth) and bathyal (200–4000 m depth) holothurians, but was significantly lower in abyssal (greater than 4000 m depth) holothurians than in shallow-water holothurians. These results support the dominance of the visual interactions hypothesis at bathyal depths, but indicate that ecological or evolutionary pressures other than biotic visual interactions contribute to bathymetric variation in holothurian metabolic rates. Multiple nonlinear regression assuming power or exponential models indicates that in situ hydrostatic pressure and/or food/chemical energy availability are responsible for variation in holothurian metabolic rates. Consequently, these results have implications for modelling deep-sea energetics and processes. PMID:29892403

Assessing the effect of administering probiotics in water or as a feed supplement on broiler performance and immune response.

PubMed

Karimi Torshizi, M A; Moghaddam, A R; Rahimi, Sh; Mojgani, N

2010-04-01

1. Two routes of probiotic administration in broiler farms, in water and in feed, were compared using 360 one-day-old male broiler chickens. Controls received no probiotics or antimicrobials. The water group received a probiotic preparation at a rate of 0.5 g/l, and the feed group received it at an inclusion rate of 1 g/kg. 2. Performance of broilers in terms body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR) improved when probiotic was provided via drinking water, compared to the control and feed groups. Probiotic administration reduced plasma cholesterol and triglyceride concentrations. 3. Spleen (28 and 42 d) and bursa (42 d) relative weights were influenced by method of probiotic administration, which also improved T-cell dependent skin thickness response to phytohaemagglutinin (PHA) injection. The effect of challenge by dinitrochlorobenzene (DNCB) depended on the method of probiotic administration. 4. The method of probiotic administration can influence the performance and immune competence of birds, and administration via drinking water appears to be superior to the more conventional in-feed supplementation method.

Conversion of Nuclear Waste to Molten Glass: Cold-Cap Reactions in Crucible Tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Kai; Hrma, Pavel; Rice, Jarrett A.

2016-05-23

The feed-to-glass conversion, which comprises complex chemical reactions and phase transitions, occurs in the cold-cap zone during nuclear waste vitrification. Knowledge of the chemistry and physics of feed-to-glass conversion will help us control the conversion path by changing the melter feed makeup to maximize the glass production rate. To investigate the conversion process, we analyzed heat-treated samples of a simulated high-level waste feed using X-ray diffraction, electron probe microanalysis – wavelength dispersive X-ray spectroscopy, leaching tests, and residual anion analysis. Feed dehydration, gas evolution, and borate phase formation occurred at temperatures below 700 °C before the emerging glass-forming melt wasmore » completely connected. Above 800 °C, intermediate aluminosilicate phases and quartz particles were gradually dissolving in the continuous borosilicate melt, which expanded into transient foam. Knowledge of the chemistry and physics of feed-to-glass conversion will help us control the conversion path by changing the melter feed makeup to maximize the glass production rate.« less

Being baby friendly: evidence-based breastfeeding support.

PubMed

Cleminson, J; Oddie, S; Renfrew, M J; McGuire, W

2015-03-01

Breast feeding improves important outcomes for mothers and infants. In the UK, breastfeeding rates have historically been low, particularly among socially disadvantaged young women. Although there have been gradual increases in breastfeeding initiation rates since 2000, rates of exclusive breast feeding and continuation until 6 months remain lower than those in similar countries. This review summarises the evidence for effective and cost-effective strategies to help women, particularly those in low income groups, make informed choices, overcome barriers and establish and maintain breast feeding. We describe the development and impact of the Unicef Baby Friendly Initiative, and the roles and responsibilities, and challenges and opportunities that clinicians have in promoting breast feeding and maintaining a baby-friendly culture and environment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Vermicomposting of source-separated human faeces by Eisenia fetida: effect of stocking density on feed consumption rate, growth characteristics and vermicompost production.

PubMed

Yadav, Kunwar D; Tare, Vinod; Ahammed, M Mansoor

2011-06-01

The main objective of the present study was to determine the optimum stocking density for feed consumption rate, biomass growth and reproduction of earthworm Eisenia fetida as well as determining and characterising vermicompost quantity and product, respectively, during vermicomposting of source-separated human faeces. For this, a number of experiments spanning up to 3 months were conducted using soil and vermicompost as support materials. Stocking density in the range of 0.25-5.00 kg/m(2) was employed in different tests. The results showed that 0.40-0.45 kg-feed/kg-worm/day was the maximum feed consumption rate by E. fetida in human faeces. The optimum stocking densities were 3.00 kg/m(2) for bioconversion of human faeces to vermicompost, and 0.50 kg/m(2) for earthworm biomass growth and reproduction. Copyright © 2011 Elsevier Ltd. All rights reserved.

40 CFR 60.404 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock.../ton) of phosphate rock feed. cs=concentration of particulate matter, g/dscm (g/dscf). Qsd=volumetric flow rate of effluent gas, dscm/hr (dscf/hr). P=phosphate rock feed rate, Mg/hr (ton/hr). K=conversion...

40 CFR 60.404 - Test methods and procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock.../ton) of phosphate rock feed. cs = concentration of particulate matter, g/dscm (g/dscf). Qsd = volumetric flow rate of effluent gas, dscm/hr (dscf/hr). P=phosphate rock feed rate, Mg/hr (ton/hr). K...

40 CFR 60.404 - Test methods and procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock.../ton) of phosphate rock feed. cs=concentration of particulate matter, g/dscm (g/dscf). Qsd=volumetric flow rate of effluent gas, dscm/hr (dscf/hr). P=phosphate rock feed rate, Mg/hr (ton/hr). K=conversion...

40 CFR 60.404 - Test methods and procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock.../ton) of phosphate rock feed. cs=concentration of particulate matter, g/dscm (g/dscf). Qsd=volumetric flow rate of effluent gas, dscm/hr (dscf/hr). P=phosphate rock feed rate, Mg/hr (ton/hr). K=conversion...

40 CFR 60.404 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock.../ton) of phosphate rock feed. cs=concentration of particulate matter, g/dscm (g/dscf). Qsd=volumetric flow rate of effluent gas, dscm/hr (dscf/hr). P=phosphate rock feed rate, Mg/hr (ton/hr). K=conversion...

Mathematical modeling of filling of gas centrifuge cascade for nickel isotope separation by various feed flow rate

NASA Astrophysics Data System (ADS)

Ushakov, Anton; Orlov, Alexey; Sovach, Victor P.

2018-03-01

This article presents the results of research filling of gas centrifuge cascade for separation of the multicomponent isotope mixture with process gas by various feed flow rate. It has been used mathematical model of the nonstationary hydraulic and separation processes occurring in the gas centrifuge cascade. The research object is definition of the regularity transient of nickel isotopes into cascade during filling of the cascade. It is shown that isotope concentrations into cascade stages after its filling depend on variable parameters and are not equal to its concentration on initial isotope mixture (or feed flow of cascade). This assumption is used earlier any researchers for modeling such nonstationary process as set of steady-state concentration of isotopes into cascade. Article shows physical laws of isotope distribution into cascade stage after its filling. It's shown that varying each parameters of cascade (feed flow rate, feed stage number or cascade stage number) it is possible to change isotope concentration on output cascade flows (light or heavy fraction) for reduction of duration of further process to set of steady-state concentration of isotopes into cascade.