California bearing ratio analysis on Kunduran - Goa Terawangan road, Blora Regency

NASA Astrophysics Data System (ADS)

Lashari, Widodo, Aris; Azizah, Nur

2018-03-01

The study about California Bearing Ratio on subgrade is required as the road infrastructure. Some researchers has conducted studies about California Bearing Ratio in both laboratory and the field to figure out the load bearing capacity of the existing soil in the field. The Kunduran - Goa Terawang road is a regency road which connects the Kunduran district and Todanan district. The length of the Kunduran - Goa Terawang is 11,44 km with the endpoint identifier (STA 0 road) from T intersection 3/49 on the provincial road km 25. The Kunduran - Goa Terawang road has experienced damaged from time to time. Therefore, the condition of load bearing capacity on the subgrade must be analysed. The value of load bearing capacity of the subgrade on the road. The California Bearing Ratio had to be conducted to figure out the value. The California Bearing Ratio test was conducted in two ways, 1) the laboratory California Bearing Ratio testing and the field California Bearing Ration using the Dynamic Cone Penetrometer. The testing was conducted in three points, STA 0+250, STA 0+500, dan STA 0+750.

Perceptual Stability of the Lissajous Figure Is Modulated by the Speed of Illusory Rotation.

PubMed

Weilnhammer, Veith A; Sterzer, Philipp; Hesselmann, Guido

2016-01-01

Lissajous figures represent ambiguous structure-from-motion stimuli rotating in depth and have proven to be a versatile tool to explore the cognitive and neural mechanisms underlying bistable perception. They are generated by the intersection of two sinusoids with perpendicular axes and increasing phase-shift whose frequency determines the speed of illusory 3D rotation. Recently, we found that Lissajous figures of higher shifting frequencies elicited longer perceptual phase durations and tentatively proposed a "representational momentum" account. In this study, our aim was twofold. First, we aimed to gather more behavioral evidence related to the perceptual dynamics of the Lissajous figure by simultaneously varying its shifting frequency and size. Using a conventional analysis, we investigated the effects of our experimental manipulations on transition probability (i.e., the probability that the current percept will change at the next critical stimulus configuration). Second, we sought to test the impact of our experimental factors on the occurrence of transitions in bistable perception by means of a Bayesian approach that can be used to directly quantify the impact of contextual cues on perceptual stability. We thereby estimated the implicit prediction of perceptual stability and how it is modulated by experimental manipulations.

Perceptual Stability of the Lissajous Figure Is Modulated by the Speed of Illusory Rotation

PubMed Central

Weilnhammer, Veith A.; Sterzer, Philipp; Hesselmann, Guido

2016-01-01

Lissajous figures represent ambiguous structure-from-motion stimuli rotating in depth and have proven to be a versatile tool to explore the cognitive and neural mechanisms underlying bistable perception. They are generated by the intersection of two sinusoids with perpendicular axes and increasing phase-shift whose frequency determines the speed of illusory 3D rotation. Recently, we found that Lissajous figures of higher shifting frequencies elicited longer perceptual phase durations and tentatively proposed a “representational momentum” account. In this study, our aim was twofold. First, we aimed to gather more behavioral evidence related to the perceptual dynamics of the Lissajous figure by simultaneously varying its shifting frequency and size. Using a conventional analysis, we investigated the effects of our experimental manipulations on transition probability (i.e., the probability that the current percept will change at the next critical stimulus configuration). Second, we sought to test the impact of our experimental factors on the occurrence of transitions in bistable perception by means of a Bayesian approach that can be used to directly quantify the impact of contextual cues on perceptual stability. We thereby estimated the implicit prediction of perceptual stability and how it is modulated by experimental manipulations. PMID:27560958

Ridges in Mars' south polar region

NASA Technical Reports Server (NTRS)

1998-01-01

Complex of rectilinear intersecting ridges in the south polar region. This 20 x 14 km area image (frame 7908) is centered near 81.5 degrees south, 65 degrees west.

Figure caption from Science Magazine

Autobiography and Community: A Personal Journey

ERIC Educational Resources Information Center

Tinto, Vincent

2013-01-01

Our personal and professional lives intersect: the story of how one young man dropped out of a doctoral program in physics to figure out what to do about the continuing problem of dropout in higher education.

Geometric Transforms for Fast Geometric Algorithms.

DTIC Science & Technology

1979-12-01

representation is not an important issue in a real RAM.) For more complicated geometrical objects such as polygons, polyhedrons , and Voronoi diagrams the issue...of N disks canl be represented as a convex polyhedron in O(N log N) time. Proof: We illustrate thle construction in Figurc 3-1 1. We first embed the N...or intersection of N arbitrary planar disks by a convex polyhedron in O(N log N) time. 0. Figure 3-11: General case for intersection or union of N

Introducing Conics without Eccentricity

ERIC Educational Resources Information Center

Glaister, Elizabeth M.; Glaister, Paul

2006-01-01

This note provides a self-contained introduction to conics as loci of points equidistant from circles, lines and points, including a study of the loci of points equidistant from two circles, separated, intersecting or touching. (Contains 1 table and 8 figures.)

Race, Ethnicity, and Higher Education Policy: The Use of Critical Quantitative Research

ERIC Educational Resources Information Center

Teranishi, Robert T.

2007-01-01

Cross-sectional frameworks, or between-group approaches, in quantitative research in higher education have limitations that hinder what we know about the intersection of race and educational opportunities and outcomes. (Contains 5 figures.)

Physical and Biological Modes of Thought in the Chemistry of Linus Pauling

NASA Astrophysics Data System (ADS)

Nye, Mary Jo

No figure in modern chemistry better exemplifies than Linus Pauling (1901-1994) the intersections of the scientific disciplines of chemistry, physics, and biology nor the roles of physical and biological modes of thought in the 'central science' of chemistry.

Values and Social Justice in Counseling

ERIC Educational Resources Information Center

Crethar, Hugh C.; Winterowd, Carrie L.

2012-01-01

The construct of social justice in counseling is defined and operationalized in this article. This is followed by a discussion about the intersection between social justice in counseling and philosophy, ethics, and spirituality. A call to action for counseling professionals is offered. (Contains 1 figure.)

Relative contribution of lateral inhibition to the Delboeuf and Wundt-Hering illusions.

PubMed

Coren, S

1999-06-01

It has been suggested that lateral neural interactions contribute to some illusions with intersecting or converging line elements but cannot be present in figures that lack these components. Most attempts to ascertain the contribution of neural interactions in visual illusions have involved changes in the actual pattern of illusion. It has now been demonstrated that certain forms of intermittent light stimulation can enhance lateral inhibitory activity. The Wundt-Hering and the Delboeuf illusions were tested under continuous illumination and "shaped" intermittent illumination which augments lateral inhibition. As expected, the Delboeuf illusion was unchanged with increased lateral inhibition while the magnitude of the Wundt-Hering illusion increased.

Apparatus for suppressing formation of vortices in the coolant fluid of a nuclear reactor and associated method

DOEpatents

Ekeroth, D.E.; Garner, D.C.; Hopkins, R.J.; Land, J.T.

1993-11-30

An apparatus and method are provided for suppressing the formation of vortices in circulating coolant fluid of a nuclear reactor. A vortex-suppressing plate having a plurality of openings therein is suspended within the lower plenum of a reactor vessel below and generally parallel to the main core support of the reactor. The plate is positioned so as to intersect vortices which may form in the circulating reactor coolant fluid. The intersection of the plate with such vortices disrupts the rotational flow pattern of the vortices, thereby disrupting the formation thereof. 3 figures.

Printed circuit dispersive transmission line

DOEpatents

Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

1991-08-27

A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

Fiber optic diffraction grating maker

DOEpatents

Deason, V.A.; Ward, M.B.

1991-05-21

A compact and portable diffraction grating maker is comprised of a laser beam, optical and fiber optics devices coupling the beam to one or more evanescent beam splitters, and collimating lenses or mirrors directing the split beam at an appropriate photosensitive material. The collimating optics, the output ends of the fiber optic coupler and the photosensitive plate holder are all mounted on an articulated framework so that the angle of intersection of the beams can be altered at will without disturbing the spatial filter, collimation or beam quality, and assuring that the beams will always intersect at the position of the plate. 4 figures.

Information Policy and Social Media: Accept or Decline

ERIC Educational Resources Information Center

Walster, Dian

2017-01-01

In this article I examine how intersections between information policy and social media affect professional ethics and instructional decision making as considered through the lens of professional development and continuing education. The discussion uses techniques from autoethnography such as personal narrative, figurative language and scenarios.…

On the generality of the topological theory of visual shape perception.

PubMed

Kanbe, Fumio

2013-01-01

This study used a series of six closely related experiments to examine whether individuals use topological structures to discriminate figures. Strict control was exerted over the selection of stimuli, which were a specific type of randomly generated lined figures that can be classified using isomorphic sets defined by graph theory. Any two figures within an isomorphic set possessed the same topological structure. The experiments described here used a same/different discrimination task with simultaneously presented pairs of figures: (a) identical pairs (Id pairs), in which each pair of figures had the same topological and superficial properties; (b) nonidentical and isomorphic pairs (Iso pairs), in which each pair had the same topological but different superficial properties; and (c) nonidentical and nonisomorphic pairs (Noniso pairs), in which each pair had different topological properties. Within these experiments I varied the conditions related to the intersecting line segments, presentation of points defining each figure, figure complexity, stimulus aspect ratios, and the parity of the total line-segment lengths between the figures in each pair. These variations showed that the latencies for making accurate discriminations were shorter for Noniso pairs than for Iso pairs, suggesting that individuals are sensitive to topology when distinguishing figures.

"The Day All of the Different Parts of Me Can Come Along": Intersectionality and U.S. Third World Feminism in the Poetry of Pat Parker and Willyce Kim.

PubMed

Van Ausdall, Mimi Iimuro

2015-01-01

This article brings to light the poetry of Pat Parker and Willyce Kim, two key figures within the 1970s and '80s women in print movement. While Parker and Kim have been rightly placed within African-American and Asian-American histories, respectively, and working-class and lesbian-feminist literary histories, their work is most fully understood within the context of U.S. Third World Feminism. Through close readings of poetic form and content in addition to engagement with current debates about intersectionality as a methodology, the article links Kim and Parker's works to central contributions of U.S. Third World Feminism such as intersectionality and power across and within difference that continue to influence feminist theory today.

Mineback Stimulation Research Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warpinski, N.R.

The Mineback Stimulation Research Program is a systematic study of hydraulic fracturing and the parameters which influence or control fracture geometry or behavior. Fractures are created near a tunnel complex at DOE's Nevada Test Site and are monitored, instrumented, and mined back to observe the effect of treatment, rock and reservoir properties on the fractures. An initial experiment to measure width and pressure in a hydraulic fracture was completed in FY 1983. The test showed that pressure drops along fractures are much larger than predicted, with the result that fractures are shorter, higher, and wider than present models estimate. Themore » cause of this is the complex morphology of hydraulic fractures, including a hierarchy of roughnesses, multiple stranding, and corners, such as the offsets which occur when natural fractures are intersected. A test to study flow behavior in hydraulic fractures with proppant is proposed for FY 1984. 7 figures.« less

Cutting Solid Figures by Plane--Analytical Solution and Spreadsheet Implementation

ERIC Educational Resources Information Center

Benacka, Jan

2012-01-01

In some secondary mathematics curricula, there is a topic called Stereometry that deals with investigating the position and finding the intersection, angle, and distance of lines and planes defined within a prism or pyramid. Coordinate system is not used. The metric tasks are solved using Pythagoras' theorem, trigonometric functions, and sine and…

Geophysical evidence for the intersection of the St Paul, Cape Palmas and Grand Cess fracture zones with the continental margin of Liberia, West Africa

USGS Publications Warehouse

Behrendt, John C.; Schlee, J.; Robb, James M.

1974-01-01

PUBLISHED reconstructions of Gondwana continent1 (Fig. la) show a gap in fit near the junction of the Americas and Africa. To study this critical area, the Unitedgeo I made geophysical measurements and collected rock samples across the continental margin of Liberia (USGS-IDOE cruise leg 5) in November 1971. Figure Ib indicates the location of the 5,400 km of ship track on a generalised bathymetric map2. We shall discuss the data in detail elsewhere. Here we present the evidence for the existence of three fracture zones, two of which have not been reported previously, intersecting the continental margin at the north end of the South Atlantic, which remained closed probably until Cretaceous time. We suggest that Precambrian structures on the African continent controlled the location of these fracture zones. Figure Ic compares gravity and magnetic profiles and interpretations of the seismic profiles for three selected lines (27, 30 and 34) crossing the Grand Cess, Cape Palmas and St Paul fracture zones, respectively. ?? 1974 Nature Publishing Group.

Solitonic Gateless Computing

DTIC Science & Technology

2006-01-29

solitons. In essence , these intersections behave as DS switching junctions. Figure 1(a) depicts a nonlinear array network involving consecutive bends...junction, the signal DS would have totally disintegrated into transmitted and reflected waves. Thus in essence , the junction operates as an AND...2000-2001) Reinhard Neumeier (undergraduate student, visiting from Technical Un. of Munich, CREOL, 2003) Jasmine Milner (undergraduate student

Shaping Subjects of Globalisation: At the Intersection of Voluntourism and the New Economy

ERIC Educational Resources Information Center

Dlaske, Kati

2016-01-01

Volunteer tourism is one of the latest branches of the ever expanding globalised tourism. The initiative Workaway, an expression of this trend, was established in the late 90s with the aim of promoting "cultural understanding between different peoples and lands throughout the world". The figure of the workawayer as a new cosmopolitan…

77 FR 24265 - Toyota Motor Corporation, Inc., on Behalf of Toyota Corporation, and Toyota Manufacturing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

..., symbols or pictograms are used, their meaning is explained to the consumer in writing, such as in the... and horizontal longitudinal planes intersecting at the horizontal centerline of each lower anchorage, as illustrated in Figure 22. The center of the circle must be in the vertical longitudinal plane that...

Neutron transport analysis for nuclear reactor design

DOEpatents

Vujic, J.L.

1993-11-30

Replacing regular mesh-dependent ray tracing modules in a collision/transfer probability (CTP) code with a ray tracing module based upon combinatorial geometry of a modified geometrical module (GMC) provides a general geometry transfer theory code in two dimensions (2D) for analyzing nuclear reactor design and control. The primary modification of the GMC module involves generation of a fixed inner frame and a rotating outer frame, where the inner frame contains all reactor regions of interest, e.g., part of a reactor assembly, an assembly, or several assemblies, and the outer frame, with a set of parallel equidistant rays (lines) attached to it, rotates around the inner frame. The modified GMC module allows for determining for each parallel ray (line), the intersections with zone boundaries, the path length between the intersections, the total number of zones on a track, the zone and medium numbers, and the intersections with the outer surface, which parameters may be used in the CTP code to calculate collision/transfer probability and cross-section values. 28 figures.

Intersection Monitor for Traffic-Light-Preemption System

NASA Technical Reports Server (NTRS)

Bachelder, Aaron; Foster, Conrad

2006-01-01

The figure shows an intersection monitor that is a key subsystem of an emergency traffic-light-preemption system that could be any of the systems described in the three immediately preceding articles and in Systems Would Preempt Traffic Lights for Emergency Vehicles (NPO-30573), NASA Tech Briefs, Vol. 28, No. 10 (October 2004), page 36. This unit is so named because it is installed at an intersection, where it monitors the phases (in the sense of timing) of the traffic lights. The mode of operation of this monitor is independent of the type of traffic-light-controller hardware or software in use at the intersection. Moreover, the design of the monitor is such that (1) the monitor does not, by itself, affect the operation of the traffic- light controller and (2) in the event of a failure of the monitor, the trafficlight controller continues to function normally (albeit without preemption). The monitor is installed in series with the traffic-light controller at an intersection. The control signals of interest are monitored by use of high-impedance taps on affected control lines. These taps are fully isolated and further protected by high-voltage diodes that prevent any voltages or short circuits that arise within the monitor from affecting the controller. The signals from the taps are processed digitally and cleaned up by use of high-speed logic gates, and the resulting data are passed on to other parts of the traffic-light-preemption intersection subsystem. The data are compared continuously with data from vehicles and used to calculate timing for reliable preemption of the traffic lights. The pedestrian crossing at the intersection is also monitored, and pedestrians are warned not to cross during preemption.

Intersecting Realities: A Novice's Attempts to Use Critical Literacy to Access Her Students' Figured Worlds

ERIC Educational Resources Information Center

Saunders, Jane M.

2012-01-01

Research suggests that while students in public schools in the U.S. are becoming increasingly diverse in terms of race, ethnicity, class, and culture, the pool of prospective teachers is made up largely of White, middle-class women. The demographic imperative indicates that this trend will remain stable for the foreseeable future, reinforcing the…

Toward a Lived Science Curriculum in Intersecting Figured Worlds: An Exploration of Individual Meanings in Science Education

ERIC Educational Resources Information Center

Price, Jeremy F.; McNeill, Katherine L.

2013-01-01

As knowledge of and familiarity with science becomes an increasingly important aspect of contemporary life and citizenship, efforts have been made to make the science curriculum a “lived” curriculum (Hurd, 2000), one that reaches out to the lives, communities, and experiences of students. In this research around a high school urban ecology…

50 CFR Figure 1 to Part 679 - Bering Sea and Aleutian Islands Statistical and Reporting Areas

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Those waters inside the Russian 200 mile limit as described in the current editions of NOAA chart INT 813 Bering Sea (Southern Part) and NOAA chart INT 814 Bering Sea (Northern Part). 400 Chukchi Sea... edition of NOAA chart INT 814 Bering Sea (Northern Part). 508 South of 58°00′ N between the intersection...

50 CFR Figure 1 to Part 679 - Bering Sea and Aleutian Islands Statistical and Reporting Areas

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Those waters inside the Russian 200 mile limit as described in the current editions of NOAA chart INT 813 Bering Sea (Southern Part) and NOAA chart INT 814 Bering Sea (Northern Part). 400 Chukchi Sea... edition of NOAA chart INT 814 Bering Sea (Northern Part). 508 South of 58°00′ N between the intersection...

50 CFR Figure 1 to Part 679 - Bering Sea and Aleutian Islands Statistical and Reporting Areas

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Those waters inside the Russian 200 mile limit as described in the current editions of NOAA chart INT 813 Bering Sea (Southern Part) and NOAA chart INT 814 Bering Sea (Northern Part). 400 Chukchi Sea... edition of NOAA chart INT 814 Bering Sea (Northern Part). 508 South of 58°00′ N between the intersection...

Reading Hertz's own dipole theory

NASA Astrophysics Data System (ADS)

Aničin, B. A.

2008-01-01

It is well known that the discoverer of radio waves, Heinrich Hertz, was the first man to apply Maxwell's electrodynamic theory to a problem in radio wave propagation. In this paper, we scrutinize his near-field lines of force using computers and his theory. In one of his four figures, a feature was found which was not to be obtained by computation. This feature, a self-intersecting line of force, more or less a figure of eight, appears strange to the eye. The clarity of the original work by H Hertz on electromagnetic waves should be of great value in both physics and engineering courses. This holds in particular for his Q function, almost completely forgotten today.

Intersection collision avoidance using ITS countermeasures. Task 9, Intersection collision avoidance system performance guidelines

DOT National Transportation Integrated Search

2000-09-01

Phase III of the Intersection Collision Avoidance Using ITS Countermeasures program developed testbed systems, implemented the systems on a vehicle, and performed testing to determine the potential effectiveness of this system in preventing intersect...

Intersection decision support : evaluation of a violation warning system to mitigate straight crossing path collisions.

DOT National Transportation Integrated Search

2006-01-01

This project entailed the design, development, testing, and evaluation of intersection decision support (IDS) systems to address straight crossing path (SCP) intersection crashes. This type of intersection crash is responsible for more than 100,000 c...

Design, analysis, and testing of a metal matrix composite web/flange intersection

NASA Technical Reports Server (NTRS)

Biggers, S. B.; Knight, N. F., Jr.; Moran, S. G.; Olliffe, R.

1992-01-01

An experimental and analytical program to study the local design details of a typical T-shaped web/flange intersection made from a metal matrix composite is described. Loads creating flange bending were applied to specimens having different designs and boundary conditions. Finite element analyses were conducted on models of the test specimens to predict the structural response. The analyses correctly predict failure load, mode, and location in the fillet material in the intersection region of the web and the flange when specimen quality is good. The test program shows the importance of fabrication quality in the intersection region. The full-scale test program that led to the investigation of this local detail is also described.

Computer Generated Pictorial Stores Management Displays for Fighter Aircraft.

DTIC Science & Technology

1983-05-01

questionnaire rating-scale data. KRISHNAIAH FINITE INTERSECTION TESTS (FITs) - A set of tests conducted after significant MANOVA results are found to...the Social Sciences (SPSS) (Reference 2). To further examine significant performance differences, the Krishnaiah Finite Intersection Test (FIT), a...New York: McGraw-Hill Book Company, 1975. 3. C. M. Cox, P. R. Krishnaiah , J. C. Lee, J. M. Reising, and F. J. Schuurman, A study on Finite Intersection

Evaluation of energy absorption of new concepts of aircraft composite subfloor intersections

NASA Technical Reports Server (NTRS)

Jones, Lisa E.; Carden, Huey D.

1989-01-01

Forty-one composite aircraft subfloor intersection specimens were tested to determine the effects of geometry and material on the energy absorbing behavior, failure characteristics, and post-crush structural integrity of the specimens. The intersections were constructed of twelve ply + or - 45 sub 6 laminates of either Kevlar 49/934 or AS-4/934 graphite-epoxy in heights of 4, 8, and 12 inches. The geometry of the specimens varied in the designs of the intersection attachment angle. Four different geometries were tested.

Intersection of Hazards and Pollution for Screening Methods

EPA Pesticide Factsheets

This layer combines the highest values of the CES, CEVA, and EJSM layers for hazard and pollution which is the burden component of the models. These models combine burden and vulnerability. This will allow viewers to see the overlap of hazard and pollution 00e2??hot spots00e2?? for each method without community figured in. This layer was created by James Sadd of Occidental College of Los Angeles

Vehicle Transponder for Preemption of Traffic Lights

NASA Technical Reports Server (NTRS)

Foster, Conrad; Bachelder, Aaron

2006-01-01

The purpose of this article is to describe, in more detail, the transponder installed in each vehicle that participates in the emergency traffic-light-preemption system described in the immediately preceding article. The transponder (see figure) is a fully autonomous data--collection, data-processing, information-display, and communication subsystem that performs robustly in preemption of traffic lights and monitoring of the statuses of street intersections. This transponder monitors the condition of the emergency vehicle in which it is installed and determines when the vehicle has been placed in an emergency-response condition with its siren and/or warning lights activated. Upon detection of such a condition, the transponder collects real-time velocity and acceleration data from the onboard diagnostic (OBD) computer of the vehicle. For this purpose, the transponder contains an OBD interface circuit, including a microprocessor that determines the manufacturer and model of the vehicle and then sends the appropriate commands to the OBD computer requesting the speed and acceleration data. At the same time, data from an onboard navigation system are collected to determine the location and the heading of the vehicle. Then acceleration, speed, position, and heading data are processed and combined with a vehicle-identification number and the resulting set of data is transmitted to monitoring and control units located at all intersections within communication range. When the unit at an intersection determines that this vehicle is approaching and has priority to preempt the intersection, it transmits a signal declaring the priority and the preemption to all participating vehicles (including this one) in the vicinity. If the unit at the intersection has determined that other participating vehicles are also approaching the intersection, then this unit also transmits, to the vehicle that has priority, a message that the other vehicles are approaching the same intersection. The texts of these messages, plus graphical symbols that show the directions and numbers of the approaching vehicles, are presented on the display panel of a computer that is part of the transponder.

Visual search performance in the autism spectrum II: the radial frequency search task with additional segmentation cues.

PubMed

Almeida, Renita A; Dickinson, J Edwin; Maybery, Murray T; Badcock, Johanna C; Badcock, David R

2010-12-01

The Embedded Figures Test (EFT) requires detecting a shape within a complex background and individuals with autism or high Autism-spectrum Quotient (AQ) scores are faster and more accurate on this task than controls. This research aimed to uncover the visual processes producing this difference. Previously we developed a search task using radial frequency (RF) patterns with controllable amounts of target/distracter overlap on which high AQ participants showed more efficient search than low AQ observers. The current study extended the design of this search task by adding two lines which traverse the display on random paths sometimes intersecting target/distracters, other times passing between them. As with the EFT, these lines segment and group the display in ways that are task irrelevant. We tested two new groups of observers and found that while RF search was slowed by the addition of segmenting lines for both groups, the high AQ group retained a consistent search advantage (reflected in a shallower gradient for reaction time as a function of set size) over the low AQ group. Further, the high AQ group were significantly faster and more accurate on the EFT compared to the low AQ group. That is, the results from the present RF search task demonstrate that segmentation and grouping created by intersecting lines does not further differentiate the groups and is therefore unlikely to be a critical factor underlying the EFT performance difference. However, once again, we found that superior EFT performance was associated with shallower gradients on the RF search task. Copyright © 2010 Elsevier Ltd. All rights reserved.

Eduard Jaeger's Test-Types (Schrift-Scalen) and the historical development of vision tests.

PubMed Central

Runge, P E

2000-01-01

PURPOSE: Eduard Jaeger's original Test-Types were carefully evaluated: (1) to determine whether Jaeger had maintained a consistent standard, (2) to establish the correct Snellen equivalent for Jaeger's Test-Types, (3) to answer the question of why and how the standard was lost, and (4) to compare the visual angle of optotypes to lines of continuous text. METHODS: All original Viennese editions of Jaeger's Test-Types, as well as first generation United Kingdom (UK) and United States (US) versions, were evaluated. Data were collected objectively using a microruler with a 20X loupe and subjectively using a laser distance-measuring device. The data were analyzed using Microsoft Excel. All previous measurements of Jaeger's Test-Types, objective and subjective, collected over the past 133 years were compared to the current data and to each other. RESULTS: The correct Snellen equivalent of Jaeger's Test-Types was determined. The visual angle created from the measurement of the height of lowercase letters, without ascenders or descenders, provides an accurate method of assigning a visual angle of a line of continuous text. Comparing the typefaces used in printing first generation UK and US versions of Jaeger's Test-Types to the Viennese editions provided an explanation for the absence of a consistent standard for Jaeger's Test-Types today. CONCLUSIONS: All 10 versions of Jaeger's original Test-Types are virtually identical and established a gold standard for reading vision tests. Jaeger's standard was lost when his Test-Types were first printed in the UK and the US using local typefaces. The Jaeger standard has been re-established. Visual angles determined using continuous text are comparable to those obtained by using optotypes. Images FIGURE 1 FIGURE 2 FIGURE 3 FIGURE 4 FIGURE 5 FIGURE 6 FIGURE 7C FIGURE 9 FIGURE 10 FIGURE 11 FIGURE 12 FIGURE 13 FIGURE 14 FIGURE 16 FIGURE 17 FIGURE 18 FIGURE 19A FIGURE 19B p409-a FIGURE 20 FIGURE 21 FIGURE 22 FIGURE 23 FIGURE 24 FIGURE 25 FIGURE 26 FIGURE 27 FIGURE 28A FIGURE 28B FIGURE 28C FIGURE 29 FIGURE 30 FIGURE 31 FIGURE 32 FIGURE 33 FIGURE 34 FIGURE 35 FIGURE 36A FIGURE 37 FIGURE 38 FIGURE 39 PMID:11190034

Microstates of D1-D5(-P) black holes, as interacting D-branes

NASA Astrophysics Data System (ADS)

Morita, Takeshi; Shiba, Shotaro

2015-07-01

In our previous study (Morita et al., 2014 [1]), we figured out that the thermodynamics of the near extremal black p-branes can be explained as the collective motions of gravitationally interacting elementary p-branes (the p-soup proposal). We test this proposal in the near-extremal D1-D5 and D1-D5-P black holes and show that their thermodynamics also can be explained in a similar fashion, i.e. via the collective motions of the interacting elementary D1-branes and D5-branes (and waves). It may imply that the microscopic origins of these intersecting black branes and the black p-brane are explained in the unified picture. We also argue the relation between the p-soup proposal and the conformal field theory calculations of the D1-D5(-P) black holes in superstring theory.

Shielded serpentine traveling wave tube deflection structure

DOEpatents

Hudson, C.L.; Spector, J.

1994-12-27

A shielded serpentine slow wave deflection structure is disclosed having a serpentine signal conductor within a channel groove. The channel groove is formed by a serpentine channel in a trough plate and a ground plane. The serpentine signal conductor is supported at its ends by coaxial feed through connectors. A beam interaction trough intersects the channel groove to form a plurality of beam interaction regions wherein an electron beam may be deflected relative to the serpentine signal conductor. 4 figures.

Reservoir Bank Erosion Caused and Influenced by Ice Cover.

DTIC Science & Technology

1982-12-01

8 8. Bank sediment deposited on shorefast ice ------------ 9 9. Sediment frozen to the bottom of ice laid down onto the reservoir bed...end of November 1979 during a storm with 45-mph northwesterly winds-- 17 16. Ice and shore sediment uplifted where an ice pres- sure ridge intersects...restarts at breakup when the ice becomes mobile; the ice scrapes, shoves and scours the shore or bank, and transports sediment away. Figure 1. Narrow zone

Gradient cuts and extremal edges in relative depth and figure-ground perception.

PubMed

Ghose, Tandra; Palmer, Stephen E

2016-02-01

Extremal edges (EEs) are borders consisting of luminance gradients along the projected edge of a partly self-occluding curved surface (e.g., a cylinder), with equiluminant contours (ELCs) that run approximately parallel to that edge. Gradient cuts (GCs) are similar luminance gradients with ELCs that intersect (are "cut" by) an edge that could be due to occlusion. EEs are strongly biased toward being seen as closer/figural surfaces (Palmer & Ghose, Psychological Science, 19(1), 77-83, 2008). Do GCs produce a complementary bias toward being seen as ground? Experiment 1 shows that, with EEs on the opposite side, GCs produce a ground bias that increases with increasing ELC angles between ELCs and the shared edge. Experiment 2 shows that, with flat surfaces on the opposite side, GCs do not produce a ground bias, suggesting that more than one factor may be operating. We suggest that two partially dissociable factors may operate for curved surfaces-ELC angle and 3-D surface convexity-that reinforce each other in the figural cues of EEs but compete with each other in GCs. Moreover, this figural bias is modulated by the presence of EEs and GCs, as specified by the ELC angle between ELCs and the shared contour.

Heat Sink Welding for Preventing Hot Cracking in Alloy 2195 Intersection Welds: A Feasibility Study

NASA Technical Reports Server (NTRS)

Yang, Yu-Ping; Dong, Pingsha; Rogers, Patrick

2000-01-01

Two concepts, stationary cooling and trailing cooling, were proposed to prevent weld intersection cracking. Finite element analysis was used to demonstrate the potential effectiveness of those two concepts. Both stationary and trailing heat sink setups were proposed for preventing intersection cracking. The cooling media could be liquid nitrogen, or pressured air knife. Welding experiments on the small test panel with the localized heat sink confirmed the feasibility of using such a stationary cooling technique. The required cooling was achieved in this test panel. Systematic welding experiments should be conducted in the future to validate and refine the heat sink technique for preventing intersection cracking.

Cooperative intersection collision avoidance system limited to stop sign and traffic signal violations (CICAS-V).

DOT National Transportation Integrated Search

2008-09-30

The objective of the Cooperative Intersection Collision Avoidance System for Violations (CICAS-V) Project is to develop and field-test a comprehensive system to reduce the number of crashes at intersections due to violations of traffic control device...

Los Alamos Canyon Ice Rink Parking Flood Plain Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hathcock, Charles Dean; Keller, David Charles

2015-02-10

The project location is in Los Alamos Canyon east of the ice rink facility at the intersection of West and Omega roads (Figure 1). Forty eight parking spaces will be constructed on the north and south side of Omega Road, and a lighted walking path will be constructed to the ice rink. Some trees will be removed during this action. A guardrail of approximately 400 feet will be constructed along the north side of West Road to prevent unsafe parking in that area.

Path Planning for Reduced Identifiability of Unmanned Surface Vehicles Conducting Intelligence, Surveillance, and Reconnaissance

DTIC Science & Technology

2017-05-22

angular velocity values Figure 33: Feasibility test Figure 34: Bellman’s Principle Figure 35: Bellman’s Principle validation Minimum Figure 36...Distribution of at test point for simulated ISR traffic Figure 48: PDFs of observed and ISR traffic Table 2: Adversary security states at test point #10...Figure 49: Hypothesis testing at test point #10 Figure 50: Distribution of for observed traffic Figure 51: Distribution of for ISR traffic Table 3

Field testing and implementation of dilemma zone protection and signal coordination at closely-spaced high-speed intersections : executive summary report.

DOT National Transportation Integrated Search

2005-05-01

The area close to a signalized intersection, : called the dilemma zone, poses a high accident : potential for the driver in stopping safely during the : yellow interval or in proceeding through the : intersection before the beginning of red. Generall...

Characterization Test Procedures for Intersection Collision Avoidance Systems Based on Vehicle-to-Vehicle Communications

DOT National Transportation Integrated Search

2015-12-01

Characterization test procedures have been developed to quantify the performance of intersection collision avoidance (ICA) systems based on vehicle-to-vehicle communications. These systems warn the driver of an imminent crossing-path collision at a r...

System Capability Assessment of Cooperative Intersection Collision Avoidance System for Violations (CICAS-V)

DOT National Transportation Integrated Search

2011-07-01

This report describes the system capability assessment for the Cooperative Intersection Collision Avoidance System for Violations (CICAS-V) based on data collected from objective tests and a pilot test. The CICAS-V is a vehicle-to-infrastructure syst...

Repeated Challenge Studies: A Comparison of Union-Intersection Testing with Linear Modeling.

ERIC Educational Resources Information Center

Levine, Richard A.; Ohman, Pamela A.

1997-01-01

Challenge studies can be used to see whether there is a causal relationship between an agent of interest and a response. An approach based on union-intersection testing is presented that allows researchers to examine observations on a single subject and test the hypothesis of interest. An application using psychological data is presented. (SLD)

Thermal Analysis of the European XFEL Intersection Control Rack

NASA Astrophysics Data System (ADS)

Concha, P.; Vazquez, C.

2014-04-01

The three undulator segments of the European X-ray Free Electron Laser contain a total of 88 intersections cells. Each intersection accommodates a quadrupole magnet on top of a high precision X-Y positioning table, a beam position monitor, four air coil correctors and a phase shifter. The Intersection Control Rack is an electrical cabinet containing the necessary electronics to control both the quadrupole and the phase shifter movements (which are stepper motor based) with a repeatability of less than 1 um and 10 um, respectively. Four different cabinets have been extensively tested to ensure that they meet specifications. These tests include a thermal analysis to study position measurements dependence on the temperature. This paper introduces a description of the thermal issue, analyses the causes and consequences of heating, presents the results of the different tests performed, and concludes the best design and operating conditions to achieve a good performance.

Independent Evaluation of the Driver Acceptance of the Cooperative Intersection Collision Avoidance System for Violations (CICAS-V) Pilot Test

DOT National Transportation Integrated Search

2011-07-01

This report documents the results of the independent evaluations assessment of the driver acceptance of the Cooperative Intersection Collision Avoidance System limited to Stop Sign and Traffic Signal Violations (CICAS-V) system as tested during a ...

Simultaneous Inference Using Finite Intersection Tests: A Better Mousetrap.

ERIC Educational Resources Information Center

Timm, Neil H.

1995-01-01

The finite intersection test (FIT) developed by P. K. Krishnaiah (1964, 1965) is discussed and compared with more familiar methods for simultaneous inference. How the FIT can be used to analyze differences among all means for both univariate and multivariate experimental designs is explained. (SLD)

Field testing and implementation of dilemma zone protection and signal coordination at closely-spaced high-speed intersections : final report, May 19, 2005.

DOT National Transportation Integrated Search

2005-05-01

The report presents the details of a study carried out to test and implement a dilemma zone protection technique at three high-speed closely-spaced intersections on Roosevelt Blvd in Middletown, Ohio.

Genetics at school level: addressing the difficulties

NASA Astrophysics Data System (ADS)

Chu, Yu-Chien; Reid, Norman

2012-11-01

Background : A wide range of studies has offered suggestions why genetics is difficult and some of their key findings are summarised. Underpinning all of this is the way the brain works when handling information. The limitations of working memory capacity offer an interpretation of these difficulties Purpose : The aim is to confirm that working memory capacity (and the related concept of field dependency) controls performance in understanding genetics and whether it is possible to improve performance by changing the teaching approach to mininise overload. Programme description : The curriculum in Taiwan in genetics is outlined briefly. A wide range of measurements were made. Using a diagnostic test of understanding of underpinning ideas, the key areas of weakness were detected before the pupils started the course. Sample : Stage 1: 141 students in Taiwan, aged 13, boys and girls, drawn from a cross-section of Taiwanese pupils at this age, following their first course in genetics. Stage 2: 361 students, drawn from a cross-section of Taiwanese pupils at the same age, and divided into two groups (experimental-control) which both encompass the same ability range. Design and methods : Stage 1: test of pre-knowledge using structural communication grids, applied before the course commenced; working memory capacity using the figural intersection test; extent of field dependency using the group embedded figure test; understanding of genetics was measured at end of course; school test data collated. Stage 2: following a completely revised approach, performance in genetics was measured using traditional school tests and a word association test. Student perspectives were measured. Results : The test of pre-knowledge revealed key areas of difficulty. In addition, it was found that working memory capacity and extent of field dependency both correlated extremely highly with all measures of performance. Given that it has been established that working memory capacity controls performance, working memory demand explains why genetics is difficult. It was found that re-structuring the teaching approach to minimise mental overload brought about a very marked improvement in performance. Conclusions : The findings suggest that it is possible to reduce difficulties in understanding genetics by means of teaching re-design to minimise potential working memory overload, with concomitant improvements in learner confidence.

Voicing Gay Women's Liberation: Judy Grahn and the Shaping of Lesbian Feminism.

PubMed

Rio, Chelsea Del

2015-01-01

A closer look at the rich world of California feminisms demonstrates how Judy Grahn served as a central figure in bay area feminism, working to establish and support lesbian activist organizations, feminist publications, women's cultural events, and more. Two of Grahn's early political writings consider how lesbians sat at the nexus of homophobia and sexism. These writings demonstrate the formative role played by San Francisco lesbians in reframing ideas about "women-loving women" and the intersections of gender and sexuality in creating the oppressions faced by all women.

Implementation of Geometric Algebra in MATLAB (registered trademark) with Applications

DTIC Science & Technology

2014-09-01

HHH HHHH HHHH HH HHH HHH HHHH P r C r O 6 HHHj ~A ~B Figure 1: Pinhole...is given by the similar map L 7→ P ∨ (C ∧ L) . (66) The result is the unique line of intersection of two planes. HHH HHH HHHH HH H HHH HHH HHH HH Pα...Pβ r Cα r Cβ rOαβ rOβα HH HHH HHH HHH HHH HH H HH H HH rX rXα rXβ A A A A

Vehicle-based countermeasures for signal and stop sign violations. Task 1, Intersection control violation crash analyses. Task 2, Top-level system and human factors requirements

DOT National Transportation Integrated Search

2004-03-01

The report provides the first two major task reports for a study to develop performance specifications and perform supporting objective tests for a planned field operational test (FOT) of a vehicle-based countermeasure to intersection crashes associa...

Relationships among selected physical science misconceptions held by preservice elementary teachers and four variables: Formal reasoning ability, working memory capacity, verbal intelligence, and field dependence/independence

NASA Astrophysics Data System (ADS)

Griffin, Leslie Little

The purpose of this study was to determine the relationship of selected cognitive abilities and physical science misconceptions held by preservice elementary teachers. The cognitive abilities under investigation were: formal reasoning ability as measured by the Lawson Classroom Test of Formal Reasoning (Lawson, 1978); working memory capacity as measured by the Figural Intersection Test (Burtis & Pascual-Leone, 1974); verbal intelligence as measured by the Acorn National Academic Aptitude Test: Verbal Intelligence (Kobal, Wrightstone, & Kunze, 1944); and field dependence/independence as measured by the Group Embedded Figures Test (Witkin, Oltman, & Raskin, 1971). The number of physical science misconceptions held by preservice elementary teachers was measured by the Misconceptions in Science Questionnaire (Franklin, 1992). The data utilized in this investigation were obtained from 36 preservice elementary teachers enrolled in two sections of a science methods course at a small regional university in the southeastern United States. Multiple regression techniques were used to analyze the collected data. The following conclusions were reached following an analysis of the data. The variables of formal reasoning ability and verbal intelligence were identified as having significant relationships, both individually and in combination, to the dependent variable of selected physical science misconceptions. Though the correlations were not high enough to yield strong predictors of physical science misconceptions or strong relationships, they were of sufficient magnitude to warrant further investigation. It is recommended that further investigation be conducted replicating this study with a larger sample size. In addition, experimental research should be implemented to explore the relationships suggested in this study between the cognitive variables of formal reasoning ability and verbal intelligence and the dependent variable of selected physical science misconceptions. Further research should also focus on the detection of a broad range of science misconceptions among preservice elementary teachers.

Application of Dilute Hydrogen Peroxide Gas Technology for Continuous Room Decontamination of Multidrug-Resistant Organisms: Negative Results from A Preliminary Experimental Study

PubMed Central

Rutala, William A; Kanamori, Hajime; Gergen, Maria; Sickbert-Bennett, Emily; Anderson, Deverick; Sexton, Daniel; Weber, David J

2017-01-01

Abstract Background Healthcare room environmental surfaces can be frequently and continuously contaminated with multidrug-resistant organisms (MDROs) that can persist in the environment for a prolonged time. Here, we used a dilute hydrogen peroxide (DHP) gas system for continuous room decontamination and experimentally examined the germicidal efficacy of the new technology against MDROs. Methods DHP units were installed in ceilings of a model room and the hallway in front of the room. We tested three test organisms; methicillin-resistant staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus (VRE), and MDR-Acinetobacter baumannii. An estimated 100–500 CFU for each test organism was inoculated and spread separately on each Formica sheet then exposed to DHP gas released into the room air. Triplicate samples were collected at times 0, 1, 3, 5, 6, 7, 24, and 48 hours. Following incubation, the colony forming units (CFU) of the test organisms on each Rodac plate were counted. Two separate experimental trials were performed for all time points. Statistical significance between intervention and control groups at each time point was determined by the Wilcoxon test, and P < 0.05 was considered significant. Results There were no statistical differences in survival between DHP intervention and control groups except data at very few time points for each organism (i.e., for MRSA in Figure 1, P = 0.0063 at 24 hours; for VRE in Figure 2, P = 0.0163 at 1 hour, P = 0.0163 at 3 hours; for MDR-Acinetobacter in in Figure 3, P = 0.0369 at 24 hours). The survival curves between both groups for each organism intersected at around 24 hours. The DHP units maintained a germicidal concentration (<0.3ppm for all runs) that was inadequate, despite attempts to control factors that could interfere with the hydrogen peroxide gas concentration. Conclusion Our preliminary study using DHP demonstrated inactivity against MDROs on room surfaces, likely because we were unable to generate a sufficient germicidal level under our test conditions with the particular DHP units. Additional technologic modifications would be required to maintain stable and effective DHP level for continuous room decontamination in patient rooms. Disclosures D. Sexton, Centers for Disease Control and Prevention: Grant Investigator, Grant recipient. Centers for Disease Control and Prevention Foundation: Grant Investigator, Grant recipient. UpToDate: Collaborator, Royalty Recipient. D. J. Weber, PDI: Consultant, Consulting fee.

Preliminary Investigation of the Shock-Boundary Layer Interaction in a Simulated Fan Passage

DTIC Science & Technology

1991-03-01

unlimited 2b DECLASSIFICATION/DOWNGRADING SCHEDULE 4 PERFORMING ORGANIZATION REPORT NUMBER(S) 5 MONITORING ORGANIZATION REPORT NUMBER(S) 6a NAME OF...Figure 4. Vortex Generator Jets Configuration [Ref. 2] 27 Figure 5 . Cascade Geometry 28 Figure 6. Schematic of Transonic Cascade Wind Tunnel 29 Figure 7... 65 Figure A9. Test Section Top Blade 66 Figure A1O. Test Section Middle Blade 67 Figure A 11. Test Section Lower Blade 68 Figure A12. Pressure Tap

Intelligent Patching of Conceptual Geometry for CFD Analysis

NASA Technical Reports Server (NTRS)

Li, Wu

2010-01-01

The iPatch computer code for intelligently patching surface grids was developed to convert conceptual geometry to computational fluid dynamics (CFD) geometry (see figure). It automatically uses bicubic B-splines to extrapolate (if necessary) each surface in a conceptual geometry so that all the independently defined geometric components (such as wing and fuselage) can be intersected to form a watertight CFD geometry. The software also computes the intersection curves of surface patches at any resolution (up to 10.4 accuracy) specified by the user, and it writes the B-spline surface patches, and the corresponding boundary points, for the watertight CFD geometry in the format that can be directly used by the grid generation tool VGRID. iPatch requires that input geometry be in PLOT3D format where each component surface is defined by a rectangular grid {(x(i,j), y(i,j), z(i,j)):1less than or equal to i less than or equal to m, 1 less than or equal to j less than or equal to n} that represents a smooth B-spline surface. All surfaces in the PLOT3D file conceptually represent a watertight geometry of components of an aircraft on the half-space y greater than or equal to 0. Overlapping surfaces are not allowed, but could be fixed by a utility code "fixp3d". The fixp3d utility code first finds the two grid lines on the two surface grids that are closest to each other in Hausdorff distance (a metric to measure the discrepancies of two sets); then uses one of the grid lines as the transition line, extending grid lines on one grid to the other grid to form a merged grid. Any two connecting surfaces shall have a "visually" common boundary curve, or can be described by an intersection relationship defined in a geometry specification file. The intersection of two surfaces can be at a conceptual level. However, the intersection is directional (along either i or j index direction), and each intersecting grid line (or its spine extrapolation) on the first surface should intersect the second surface. No two intersection relationships will result in a common intersection point of three surfaces. The output files of iPatch are IGES, d3m, and mapbc files that define the CFD geometry in VGRID format. The IGES file gives the NURBS definition of the outer mold line in the geometry. The d3m file defines how the outer mold line is broken into surface patches whose boundary curves are defined by points. The mapbc file specifies what the boundary condition is on each patch and the corresponding NURBS surface definition of each non-planar patch in the IGES file.

Evaluation of 25-Percent ATJ Fuel Blends in the John Deere 4045HF 280 Engine

DTIC Science & Technology

2014-08-01

25% ATJ Blend ........ 26 Figure 16 . THC Emissions, Pre-Test, Ambient Temperature ...................................................... 28 Figure...17 . THC Emissions, Pre-Test, Desert Temperature ......................................................... 28 Figure 18 . NOx Emissions, Pre-Test...Emissions, Pre-Test, Desert Temperature (Scaled) ............................................. 32 Figure 23 . THC Emissions, Post-Test, Ambient

What Makes Fusion Cells Effective?

DTIC Science & Technology

2009-12-01

83 Figure 18. Breusch - Pagan Test for Overall Model ...........................................................83 Figure 19. Ramsey Test for Overall...Probability Norm for DoD Model IV5 ............................................................89 Figure 31. Breusch - Pagan Test for DoD Model... Breusch - Pagan Test for State and Local Model ..............................................95 Figure 45. Ramsey Test for State and Local Model

Evaluating Merger and Intersection of Equivalence Classes with One Member in Common

ERIC Educational Resources Information Center

MacKay, Harry A.; Wilkinson, Krista M.; Farrell, Colleen; Serna, Richard W.

2011-01-01

Sidman (1994) noted that the existence of a member that is common to more than one class may produce either class merger (union) or class intersection. A multiple-selection, matching-to-sample test was developed to examine the conditions under which these outcomes occur. Test trials each required three conditional discriminations involving…

Moving Particles Through a Finite Element Mesh

PubMed Central

Peskin, Adele P.; Hardin, Gary R.

1998-01-01

We present a new numerical technique for modeling the flow around multiple objects moving in a fluid. The method tracks the dynamic interaction between each particle and the fluid. The movements of the fluid and the object are directly coupled. A background mesh is designed to fit the geometry of the overall domain. The mesh is designed independently of the presence of the particles except in terms of how fine it must be to track particles of a given size. Each particle is represented by a geometric figure that describes its boundary. This figure overlies the mesh. Nodes are added to the mesh where the particle boundaries intersect the background mesh, increasing the number of nodes contained in each element whose boundary is intersected. These additional nodes are then used to describe and track the particle in the numerical scheme. Appropriate element shape functions are defined to approximate the solution on the elements with extra nodes. The particles are moved through the mesh by moving only the overlying nodes defining the particles. The regular finite element grid remains unchanged. In this method, the mesh does not distort as the particles move. Instead, only the placement of particle-defining nodes changes as the particles move. Element shape functions are updated as the nodes move through the elements. This method is especially suited for models of moderate numbers of moderate-size particles, where the details of the fluid-particle coupling are important. Both the complications of creating finite element meshes around appreciable numbers of particles, and extensive remeshing upon movement of the particles are simplified in this method. PMID:28009377

High Efficiency Thermoelectric Radioisotope Power Systems

NASA Technical Reports Server (NTRS)

El-Genk, Mohamed; Saber, Hamed; Caillat, Thierry

2004-01-01

The work performed and whose results presented in this report is a joint effort between the University of New Mexico s Institute for Space and Nuclear Power Studies (ISNPS) and the Jet Propulsion Laboratory (JPL), California Institute of Technology. In addition to the development, design, and fabrication of skutterudites and skutterudites-based segmented unicouples this effort included conducting performance tests of these unicouples for hundreds of hours to verify theoretical predictions of the conversion efficiency. The performance predictions of these unicouples are obtained using 1-D and 3-D models developed for that purpose and for estimating the actual performance and side heat losses in the tests conducted at ISNPS. In addition to the performance tests, the development of the 1-D and 3-D models and the development of Advanced Radioisotope Power systems for Beginning-Of-Life (BOM) power of 108 We are carried out at ISNPS. The materials synthesis and fabrication of the unicouples are carried out at JPL. The research conducted at ISNPS is documented in chapters 2-5 and that conducted at JP, in documented in chapter 5. An important consideration in the design and optimization of segmented thermoelectric unicouples (STUs) is determining the relative lengths, cross-section areas, and the interfacial temperatures of the segments of the different materials in the n- and p-legs. These variables are determined using a genetic algorithm (GA) in conjunction with one-dimensional analytical model of STUs that is developed in chapter 2. Results indicated that when optimized for maximum conversion efficiency, the interfacial temperatures between various segments in a STU are close to those at the intersections of the Figure-Of-Merit (FOM), ZT, curves of the thermoelectric materials of the adjacent segments. When optimizing the STUs for maximum electrical power density, however, the interfacial temperatures are different from those at the intersections of the ZT curves, but close to those at the intersections the characteristic power, CP, curves of the thermoelectric materials of the adjacent segments (CP = T(sup 2)Zk and has a unit of W/m). Results also showed that the number of the segments in the n- and p-legs of the STUs optimized for maximum power density are generally fewer than when the same unicouples are optimized for maximum efficiency. These results are obtained using the 1-D optimization model of STUs that is detailed in chapter 2. A three-dimensional model of STUs is developed and incorporated into the ANSYS commercial software (chapter 3). The governing equations are solved, subject to the prescribed

How to Best Name a Place? Facilitation and Inhibition of Route Learning Due to Descriptive and Arbitrary Location Labels.

PubMed

Meilinger, Tobias; Schulte-Pelkum, Jörg; Frankenstein, Julia; Hardiess, Gregor; Laharnar, Naima; Mallot, Hanspeter A; Bülthoff, Heinrich H

2016-01-01

Establishing verbal memory traces for non-verbal stimuli was reported to facilitate or inhibit memory for the non-verbal stimuli. We show that these effects are also observed in a domain not indicated before-wayfinding. Fifty-three participants followed a guided route in a virtual environment. They were asked to remember half of the intersections by relying on the visual impression only. At the other 50% of the intersections, participants additionally heard a place name, which they were asked to memorize. For testing, participants were teleported to the intersections and were asked to indicate the subsequent direction of the learned route. In Experiment 1, intersections' names were arbitrary (i.e., not related to the visual impression). Here, participants performed more accurately at unnamed intersections. In Experiment 2, intersections' names were descriptive and participants' route memory was more accurate at named intersections. Results have implications for naming places in a city and for wayfinding aids.

How to Best Name a Place? Facilitation and Inhibition of Route Learning Due to Descriptive and Arbitrary Location Labels

PubMed Central

Meilinger, Tobias; Schulte-Pelkum, Jörg; Frankenstein, Julia; Hardiess, Gregor; Laharnar, Naima; Mallot, Hanspeter A.; Bülthoff, Heinrich H.

2016-01-01

Establishing verbal memory traces for non-verbal stimuli was reported to facilitate or inhibit memory for the non-verbal stimuli. We show that these effects are also observed in a domain not indicated before—wayfinding. Fifty-three participants followed a guided route in a virtual environment. They were asked to remember half of the intersections by relying on the visual impression only. At the other 50% of the intersections, participants additionally heard a place name, which they were asked to memorize. For testing, participants were teleported to the intersections and were asked to indicate the subsequent direction of the learned route. In Experiment 1, intersections' names were arbitrary (i.e., not related to the visual impression). Here, participants performed more accurately at unnamed intersections. In Experiment 2, intersections' names were descriptive and participants' route memory was more accurate at named intersections. Results have implications for naming places in a city and for wayfinding aids. PMID:26869975

Intersection-Controller Software Module

NASA Technical Reports Server (NTRS)

Bachelder, Aaron; Foster, Conrad

2005-01-01

An important part of the emergency-vehicle traffic-light-preemption system summarized in the preceding article is a software module executed by a microcontroller in each intersection controller. This module monitors the broadcasts from all nearby participating emergency vehicles and intersections. It gathers the broadcast data pertaining to the positions and velocities of the vehicles and the timing of traffic and pedestrian lights and processes the data into predictions of the future positions of the vehicles. Analyzing the predictions by a combination of proximity tests, map-matching techniques, and statistical calculations designed to minimize the adverse effects of uncertainties in vehicle positions and headings, the module decides whether to preempt and issues the appropriate commands to the traffic lights, pedestrian lights, and electronic warning signs at the intersection. The module also broadcasts its state to all nearby vehicles and intersections. The module is designed to mitigate the effects of missing data and of unpredictable delays in the system. It has been intensively tested and refined so that it fails to warn in very few cases and issues very few false warnings.

The potential of clustering methods to define intersection test scenarios: Assessing real-life performance of AEB.

PubMed

Sander, Ulrich; Lubbe, Nils

2018-04-01

Intersection accidents are frequent and harmful. The accident types 'straight crossing path' (SCP), 'left turn across path - oncoming direction' (LTAP/OD), and 'left-turn across path - lateral direction' (LTAP/LD) represent around 95% of all intersection accidents and one-third of all police-reported car-to-car accidents in Germany. The European New Car Assessment Program (Euro NCAP) have announced that intersection scenarios will be included in their rating from 2020; however, how these scenarios are to be tested has not been defined. This study investigates whether clustering methods can be used to identify a small number of test scenarios sufficiently representative of the accident dataset to evaluate Intersection Automated Emergency Braking (AEB). Data from the German In-Depth Accident Study (GIDAS) and the GIDAS-based Pre-Crash Matrix (PCM) from 1999 to 2016, containing 784 SCP and 453 LTAP/OD accidents, were analyzed with principal component methods to identify variables that account for the relevant total variances of the sample. Three different methods for data clustering were applied to each of the accident types, two similarity-based approaches, namely Hierarchical Clustering (HC) and Partitioning Around Medoids (PAM), and the probability-based Latent Class Clustering (LCC). The optimum number of clusters was derived for HC and PAM with the silhouette method. The PAM algorithm was both initiated with random start medoid selection and medoids from HC. For LCC, the Bayesian Information Criterion (BIC) was used to determine the optimal number of clusters. Test scenarios were defined from optimal cluster medoids weighted by their real-life representation in GIDAS. The set of variables for clustering was further varied to investigate the influence of variable type and character. We quantified how accurately each cluster variation represents real-life AEB performance using pre-crash simulations with PCM data and a generic algorithm for AEB intervention. The usage of different sets of clustering variables resulted in substantially different numbers of clusters. The stability of the resulting clusters increased with prioritization of categorical over continuous variables. For each different set of cluster variables, a strong in-cluster variance of avoided versus non-avoided accidents for the specified Intersection AEB was present. The medoids did not predict the most common Intersection AEB behavior in each cluster. Despite thorough analysis using various cluster methods and variable sets, it was impossible to reduce the diversity of intersection accidents into a set of test scenarios without compromising the ability to predict real-life performance of Intersection AEB. Although this does not imply that other methods cannot succeed, it was observed that small changes in the definition of a scenario resulted in a different avoidance outcome. Therefore, we suggest using limited physical testing to validate more extensive virtual simulations to evaluate vehicle safety. Copyright © 2018 Elsevier Ltd. All rights reserved.

Medical College of Georgia Complex figures in repeated memory testing: a preliminary study of healthy young adults.

PubMed

Yasugi, Mina; Yamashita, Hikari

2010-02-01

The Medical College of Georgia Complex Figures developed as an alternate version of the Rey-Osterrieth Complex Figure for repeated assessments. The aim of this study was to examine whether serial assessment with different figures of the Medical College of Georgia Complex Figures could attenuate the practice effects. 64 volunteers (M age = 20.0 yr., SD = 1.9) from a Japanese university were randomly assigned to Same or Different figure conditions. Participants in the Same figure condition underwent repeated assessment using Figure 1 of the Medical College of Georgia Complex Figures on both trials, whereas participants in the Different figure condition received Figure 1 on first trials and the Figure 2 on second trials over a 1-mo. test-retest interval. While the Same figure condition showed significant improvements at recall, no practice effect was observed in the Different figure condition. The findings indicated that use of different figures may help attenuate practice effects in repeated testing.

Field evaluation of smart sensor vehicle detectors at intersections - volume 1 : normal weather conditions.

DOT National Transportation Integrated Search

2012-10-01

Microwave-based vehicle detection products from two manufacturers were selected for field testing and : evaluation: Wavetronix and Intersector. The two systems were installed by the manufacturer/distributor at a : signalized intersection. Initial eva...

Solving a Class of Spatial Reasoning Problems: Minimal-Cost Path Planning in the Cartesian Plane.

DTIC Science & Technology

1987-06-01

as in Figure 72. By the Theorem of Pythagoras : Z1 <a z 2 < C Yl(bl+b 2)uI, the cost of going along (a,b,c) is greater that the...preceding lemmas to an indefinite number of boundary-crossing episodes is accomplished by the following theorems . Theorem 1 extends the result of Lemma 1... Theorem 1: Any two Snell’s-law paths within a K-explored wedge defined by Snell’s-law paths RL and R. do not intersect within the K-explored portion of

Nonadiabatic Eigenfunctions Can Have Amplitude, Signed Conical Nodes, or Signed Higher Order Nodes at a Conical Intersection with Circular Symmetry (Open Access Publisher’s Version)

DTIC Science & Technology

2017-09-26

for asymmetric vibrations, I ̂ = |x⟩⟨x| + |y⟩ ⟨y| is the electronic identity operator, and d is the vibrational displacement . The first line is an...positive displacement d in eq 4 gives the Jahn−Teller effect on a particle in a square 2D box46−48 expected from the Hellmann−Feynman theorem.49 The...and 3/2, all of which involve larger displacements than in Table 1. ■ RESULTS Figure 2 provides a complete characterization of the 12 lowest

Attitudes and learning difficulties in middle school science in South Korea

NASA Astrophysics Data System (ADS)

Jung, Eun Sook

The purpose of this study is to investigate the relationship between cognitive and attitudinal aspects of learning science, concentrating mainly on the influence of cognitive understanding and learning difficulty on attitudes to science. This theme is selected, in particular, because it is reported that Korean students at secondary level do not enjoy studying science and have not enough confidence, although their achievements are high. Johnstone's information processing model (1993) is used to account for cognitive aspects of science education. Learning processes are understood in terms of student's own knowledge construction through the operation of perception filters, processing in working memory space and storing in long term memory. In particular, the overload of student's working memory space is considered as the main factor causing learning difficulty and, in consequence, learning failure. The research took place in one middle school located in Seoul, the capital city in South Korea. 364 students aged 13 and 350 aged 15 participated. In order to try to find relationships between cognitive and affective factors of science learning, individual student's working memory space was measured and a questionnaire designed to gather information about students' attitudes was prepared and given to all students. To determine the working memory space capacity of the students, the Figural Intersection Test (F.I.T), designed by Pascual-Leone, was used. Two kinds of analysis, comparison and correlation, were performed with data from the Figural Intersection Test and the questionnaire applied to students. For the comparison of attitudes between age 13 and 15, the distributions of frequencies of responses were analyzed for each particular statement in a question. The Chi-square (?[2]) test was applied to judge the statistically significant differences in responses of the two groups. The levels of significance used were 0.05, 0.01 and 0.001. In order to see whether there is difference of opinions related to various aspects of learning science between age 13 and 15, and between high and middle and low working memory capacity groups, students responses were compared by just looking at the distribution of percentages without doing more statistics. Correlation coefficients were calculated to see if student's working memory capacity is linked with attitudes. As a result of data analyses from the working memory test and the questionnaire, it is seen that working memory space is related to some student attitudes towards science and their way of studying. Compared to students with high working memory capacity, students who have low working memory capacity are likely to lose their interest in science, feel science is difficult, and have low confidence about studying science. In addition, they tend to depend on memorization when they study science, consider science as a future career less, and are less motivated to study science by attitudinal factors such as "I really enjoy studying science", "Science is useful in my life". This exploratory study has suggested some important issues which need addressed in developing positive attitudes as well as encouraging meaningful learning.

Design of a Helmet Liner for Improved Low Velocity Impact Protection

DTIC Science & Technology

2013-05-01

FIGURE 14. MONORAIL DROP TEST WITH DOT-SIZE C HEADFORM AND HEMISPHERICAL ANVIL ........................... 14  FIGURE 15. ACH PAD CONFIGURATION. LEFT...materials. In this project, the monorail drop test device, used for the helmeted headform drop test, was modified for material testing as shown in Figure...a guided free fall drop test using a monorail drop test apparatus as shown in Figure 14. All helmets tested in this study were ACH-Size Large and

Revised Planning Methodology For Signalized Intersections And Operational Analysis Of Exclusive Left-Turn Lanes, Part-II: Models And Procedures (Final Report)

DOT National Transportation Integrated Search

1996-04-01

THIS REPORT ALSO DESCRIBES THE PROCEDURES FOR DIRECT ESTIMATION OF INTERSECTION CAPACITY WITH SIMULATION, INCLUDING A SET OF RIGOROUS STATISTICAL TESTS FOR SIMULATION PARAMETER CALIBRATION FROM FIELD DATA.

Cooperative Intersection Collision Avoidance System for Violations (CICAS-V) : Database Structure

DOT National Transportation Integrated Search

2011-07-01

This report documents the process required for data exchange between a conductor of a field operational test (FOT) and an independent evaluator based on the experience of the Cooperative Intersection Collision Avoidance System for Violations (CICAS-V...

Development and preliminary testing of an automatic turning movements identification system : final report, February 2010.

DOT National Transportation Integrated Search

2010-02-01

It is important for many applications, such as intersection delay estimation and adaptive signal : control, to obtain vehicle turning movement information at signalized intersections. However, : vehicle turning movement information is very time consu...

X-48C Flies Over Intersecting Runways

NASA Image and Video Library

2013-02-28

The X-48C Hybrid Wing Body research aircraft flew over the intersection of several runways adjacent to the compass rose on Rogers Dry Lake at Edwards Air Force Base during one of the sub-scale aircraft's final test flights on Feb. 28, 2013.

Aerospace Technology: Technical Data and Information on Foreign Test Facilities

DTIC Science & Technology

1990-06-22

effects of an airflow on various active models (nozzles or rotors ) or pas- sive models (airfoils). It is specially dedicated to acoustic testing driven by...Tunnel Figure V.3: Aerospatiale Rotor Test Bench and 99 Microphones Installed Inside Test Chamber of the CEPRA 19 Anechoic Wind Tunnel Figure V.4...Figure V.26: Ground Effect Test on Airbus A320 Model in 127 Test Section of the ONERA S1MA Wind Tunnel Figure V.27: ONERA S3Ch Transonic Wind Tunnel 130

Modelling how drivers respond to a bicyclist crossing their path at an intersection: How do test track and driving simulator compare?

PubMed

Boda, Christian-Nils; Dozza, Marco; Bohman, Katarina; Thalya, Prateek; Larsson, Annika; Lubbe, Nils

2018-02-01

Bicyclist fatalities are a great concern in the European Union. Most of them are due to crashes between motorized vehicles and bicyclists at unsignalised intersections. Different countermeasures are currently being developed and implemented in order to save lives. One type of countermeasure, active safety systems, requires a deep understanding of driver behaviour to be effective without being annoying. The current study provides new knowledge about driver behaviour which can inform assessment programmes for active safety systems such as Euro NCAP. This study investigated how drivers responded to bicyclists crossing their path at an intersection. The influences of car speed and cyclist speed on the driver response process were assessed for three different crossing configurations. The same experimental protocol was tested in a fixed-base driving simulator and on a test track. A virtual model of the test track was used in the driving simulator to keep the protocol as consistent as possible across testing environments. Results show that neither car speed nor bicycle speed directly influenced the response process. The crossing configuration did not directly influence the braking response process either, but it did influence the strategy chosen by the drivers to approach the intersection. The point in time when the bicycle became visible (which depended on the car speed, the bicycle speed, and the crossing configuration) and the crossing configuration alone had the largest effects on the driver response process. Dissimilarities between test-track and driving-simulator studies were found; however, there were also interesting similarities, especially in relation to the driver braking behaviour. Drivers followed the same strategy to initiate braking, independent of the test environment. On the other hand, the test environment affected participants' strategies for releasing the gas pedal and regulating deceleration. Finally, a mathematical model, based on both experiments, is proposed to characterize driver braking behaviour in response to bicyclists crossing at intersections. This model has direct implications on what variables an in-vehicle safety system should consider and how tests in evaluation programs should be designed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of the effects of overexpression of metallothionein-I in transgenic mice on the reproductive toxicology of cadmium.

PubMed Central

Dalton, T; Fu, K; Enders, G C; Palmiter, R D; Andrews, G K

1996-01-01

Exposure to low levels of cadmium reduces fertility. In male mice spermatogenesis is highly sensitive to cadmium, whereas in females the peri-implantation period of pregnancy is sensitive. To examine the potential roles of the cadmium-binding protein, metallothionein (MT), in the reproductive toxicology of cadmium, we examined a transgenic mouse strain that overexpresses metallothionein-I (MT-I). These mice had dramatically increased steady-state levels of MT-I mRNA and MT in the testes and in the female reproductive tract during the peri-implantation period of pregnancy, and this overexpression occurred in a cell-specific and temporally regulated manner similar to that of the endogenous MT-I gene. Transgenic and control males were injected with cadmium, and the histology of the testes was examined. An injection of 7.5 mumol Cd/kg had no effect on histology of the testes in either transgenic or control mice. In contrast, an injection of 10 mumol Cd/kg caused rapid changes in the histology of the testes and resulted in pronounced testicular necrosis in both control and transgenic mice. Female transgenic and control mice were mated and then injected with cadmium (30-45 mumol Cd/kg) on the day of blastocyst implantation (day 4). In both of these groups, injection of cadmium reduced pregnancy rate, and no dramatic protection was afforded by maternal and/or embryonic overexpression of MT. Thus, overexpression of MT-I does not significantly protect against either of these cadmium-induced effects on fertility. Images Figure 1. A Figure 1. B Figure 2. A Figure 2. B Figure 2. C Figure 3. Figure 4. A Figure 4. A Figure 4. B Figure 4. B Figure 4. B Figure 4. B Figure 4. D4 Figure 4. D4 Figure 4. D6 Figure 4. D6 Figure 4. D8 Figure 5. A Figure 5. B Figure 5. C Figure 5. D Figure 5. E Figure 6. A Figure 6. B Figure 6. C Figure 6. D Figure 6. E Figure 6. F PMID:8834864

Simulation System of Car Crash Test in C-NCAP Analysis Based on an Improved Apriori Algorithm*

NASA Astrophysics Data System (ADS)

Xiang, LI

In order to analysis car crash test in C-NCAP, an improved algorithm is given based on Apriori algorithm in this paper. The new algorithm is implemented with vertical data layout, breadth first searching, and intersecting. It takes advantage of the efficiency of vertical data layout and intersecting, and prunes candidate frequent item sets like Apriori. Finally, the new algorithm is applied in simulation of car crash test analysis system. The result shows that the relations will affect the C-NCAP test results, and it can provide a reference for the automotive design.

The Influence of Intersections on Fuel Consumption in Urban Arterial Road Traffic: A Single Vehicle Test in Harbin, China

PubMed Central

Wu, Lina; Ci, Yusheng; Chu, Jiangwei; Zhang, Hongsheng

2015-01-01

The calculating method for fuel consumption (FC) was put forward and calibrated and the characteristics of the fuel consumption on intersections were analyzed based on 18 groups of vehicular operating data which were acquired from the test experiment of a single vehicle along the urban arterial roads in Harbin, China. The results obtained show that 50.36% of the fuel consumption for the test vehicle was used at the area of intersections compared with 28.9% of the influencing distance and 68.5% of the running time; and 78.4% of them was burnt at the stages of acceleration and idling. Meanwhile, the type (c) of the vehicular operating status was illustrated to be the worst way of reducing fuel consumption, the causes were analyzed and four improvement strategies were put forward. PMID:26367012

The intersection syndrome: Ultrasound findings and their diagnostic value

PubMed Central

Montechiarello, S.; Miozzi, F.; D’Ambrosio, I.; Giovagnorio, F.

2010-01-01

Introduction The intersection syndrome is a well-known overuse syndrome of the distal forearm. It is characterized by noninfectious, inflammatory changes involving the area of intersection of the first (abductor pollicis longus and extensor pollicis brevis) and second (extensor carpi radialis longus and extensor carpi radialis brevis) extensor compartments in the dorsoradial aspect of the distal forearm. Imaging modalities used to diagnosis this syndrome include ultrasonography (US) and magnetic resonance imaging. The purpose of this report is to describe typical US findings in the intersection syndrome and to demonstrate the diagnostic value of this approach. Materials and methods We reviewed US findings in 4 patients (mean age 40 years) referred to our staff for symptoms suggestive of the intersection syndrome (pain, swelling, erythema, and edema of the wrist). Results In all 4 cases, the US examination revealed peritendinous edema and synovial fluid within the tendon sheaths at the intersection between the first and the second dorsal extensor tendon compartments. Discussion Our experience shows that the intersection syndrome is associated with typical signs on US. This imaging modality can be considered a reliable tool for diagnosing this syndrome and may eliminate the need for other more expensive tests. PMID:23396515

Intersection assistance: a safe solution for older drivers?

PubMed

Dotzauer, Mandy; Caljouw, Simone R; de Waard, Dick; Brouwer, Wiebo H

2013-10-01

Within the next few decades, the number of older drivers operating a vehicle will increase rapidly (Eurostat, 2011). As age increases so does physical vulnerability, age-related impairments, and the risk of being involved in a fatal crashes. Older drivers experience problems in driving situations that require divided attention and decision making under time pressure as reflected by their overrepresentation in at-fault crashes on intersections. Advanced Driver Assistance Systems (ADAS) especially designed to support older drivers crossing intersections might counteract these difficulties. In a longer-term driving simulator study, the effects of an intersection assistant on driving were evaluated. 18 older drivers (M=71.44 years) returned repeatedly completing a ride either with or without a support system in a driving simulator. In order to test the intersection assistance, eight intersections were depicted for further analyses. Results show that ADAS affects driving. Equipped with ADAS, drivers allocated more attention to the road center rather than the left and right, crossed intersections in shorter time, engaged in higher speeds, and crossed more often with a critical time-to-collision (TTC) value. The implications of results are discussed in terms of behavioral adaptation and safety. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Program to Improve the Triangulated Surface Mesh Quality Along Aircraft Component Intersections

NASA Technical Reports Server (NTRS)

Cliff, Susan E.

2005-01-01

A computer program has been developed for improving the quality of unstructured triangulated surface meshes in the vicinity of component intersections. The method relies solely on point removal and edge swapping for improving the triangulations. It can be applied to any lifting surface component such as a wing, canard or horizontal tail component intersected with a fuselage, or it can be applied to a pylon that is intersected with a wing, fuselage or nacelle. The lifting surfaces or pylon are assumed to be aligned in the axial direction with closed trailing edges. The method currently maintains salient edges only at leading and trailing edges of the wing or pylon component. This method should work well for any shape of fuselage that is free of salient edges at the intersection. The method has been successfully demonstrated on a total of 125 different test cases that include both blunt and sharp wing leading edges. The code is targeted for use in the automated environment of numerical optimization where geometric perturbations to individual components can be critical to the aerodynamic performance of a vehicle. Histograms of triangle aspect ratios are reported to assess the quality of the triangles attached to the intersection curves before and after application of the program. Large improvements to the quality of the triangulations were obtained for the 125 test cases; the quality was sufficient for use with an automated tetrahedral mesh generation program that is used as part of an aerodynamic shape optimization method.

The Structural, Functional, and Molecular Organization of the Brainstem

PubMed Central

Nieuwenhuys, Rudolf

2011-01-01

According to His (1891, 1893) the brainstem consists of two longitudinal zones, the dorsal alar plate (sensory in nature) and the ventral basal plate (motor in nature). Johnston and Herrick indicated that both plates can be subdivided into separate somatic and visceral zones, distinguishing somatosensory and viscerosensory zones within the alar plate, and visceromotor and somatomotor zones within the basal plate. To test the validity of this “four-functional-zones” concept, I developed a topological procedure, surveying the spatial relationships of the various cell masses in the brainstem in a single figure. Brainstems of 16 different anamniote species were analyzed, and revealed that the brainstems are clearly divisible into four morphological zones, which correspond largely with the functional zones of Johnston and Herrick. Exceptions include (1) the magnocellular vestibular nucleus situated in the viscerosensory zone; (2) the basal plate containing a number of evidently non-motor centers (superior and inferior olives). Nevertheless the “functional zonal model” has explanatory value. Thus, it is possible to interpret certain brain specializations related to particular behavioral profiles, as “local hypertrophies” of one or two functional columns. Recent developmental molecular studies on brains of birds and mammals confirmed the presence of longitudinal zones, and also showed molecularly defined transverse bands or neuromeres throughout development. The intersecting boundaries of the longitudinal zones and the transverse bands appeared to delimit radially arranged histogenetic domains. Because neuromeres have been observed in embryonic and larval stages of numerous anamniote species, it may be hypothesized that the brainstems of all vertebrates share a basic organizational plan, in which intersecting longitudinal and transverse zones form fundamental histogenetic and genoarchitectonic units. PMID:21738499

Yellow lights : small changes in the timing of signal lights could reduce crashes at urban intersections

DOT National Transportation Integrated Search

2001-04-28

An Institute of Transportation Engineers (ITE) test at 122 standard four-leg intersections in Long Island, NY, shows that retiming the length of the yellow/red phases of traffic signals can reduce serious and reportable accidents ($1,000-plus damage ...

Development of automated testing tools for traffic control signals and devices (NTCIP and security) phase 2 : [summary].

DOT National Transportation Integrated Search

2015-02-01

The metal cabinets that house traffic signal : controllers are a common sight at most : intersections in Florida. Traffic engineers use them : to time signal changes and facilitate the flow of : traffic through an intersection. At the core of this : ...

Armed Forces Institute of Regenerative Medicine Annual Report 2010

DTIC Science & Technology

2011-01-01

manufacture a PDO bioabsorbable stent (Figure II-12) and a fracture -resistant nitinol stent (Figure II-13). 2. Mechanically test tissue following...storage in anhy­ drous fluid (Figure II-14). 3. Conduct fatigue tests on fracture -resistant stents (Figure II-15). 4. Mechanically evaluate the...veloped a fracture -resistant tissue-lined nitinol stent, and mechanically tested both stents. Both designs performed exceptionally well in mechanical

ITS technology at highway-rail intersections : putting it to the test : proceedings from the ITS Joint Program Office Highway-Rail Intersection Evaluation Workshop May 6 & 7, 1999

DOT National Transportation Integrated Search

2000-01-19

This document serves as the proceedings form an evaluation workshop that focused on Intelligent Transportation Systems (ITS) applications at highway and rail crossings. Reports delivered contain information from seven U.S. sites where ITS technologie...

16 CFR Figure 7 to Part 1203 - Typical Test Apparatus for Positional Stability Test

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Typical Test Apparatus for Positional Stability Test 7 Figure 7 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 7 Figure 7 to Part 1203—Typical Test Apparatus for Positional...

16 CFR Figure 7 to Part 1203 - Typical Test Apparatus for Positional Stability Test

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Typical Test Apparatus for Positional Stability Test 7 Figure 7 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 7 Figure 7 to Part 1203—Typical Test Apparatus for Positional...

16 CFR Figure 7 to Part 1203 - Typical Test Apparatus for Positional Stability Test

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Typical Test Apparatus for Positional Stability Test 7 Figure 7 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 7 Figure 7 to Part 1203—Typical Test Apparatus for Positional...

The threshold signal:noise ratio in the perception of fragmented figures.

PubMed

Merkul'ev, A V; Pronin, S V; Semenov, L A; Foreman, N; Chikhman, V N; Shelepin, Yu E

2006-01-01

Perception thresholds were measured for fragmented outline figures (the Gollin test). A new approach to the question of the perception of incomplete images was developed. In this approach, figure fragmentation consisted of masking with multiplicative texture-like noise--this interference was termed "invisible" masking. The first series of studies established that the "similarity" between the amplitude-frequency spectra of test figures and "invisible" masks, expressed as a linear correlation coefficient, had significant effects on the recognition thresholds of these figures. The second series of experiments showed that progressing formation of the figures was accompanied by increases in the correlation between their spatial-frequency characteristics and the corresponding characteristics of the incomplete figure, while the correlation with the "invisible" mask decreased. It is suggested that the ratio of the correlation coefficients, characterizing the "similarity" of the fragmented figure with the intact figure and the "invisible" mask, corresponds to the signal:noise ratio. The psychophysical recognition threshold for figures for naive subjects not familiar with the test image alphabet was reached after the particular level of fragmentation at which this ratio was unity.

16 CFR Figures 3 and 4 to Part 1204 - High Voltage Test Facility and Antenna System Test Setup

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false High Voltage Test Facility and Antenna System Test Setup 3 Figures 3 and 4 to Part 1204 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... ANTENNAS Pt. 1204, Figs. 3, 4 Figures 3 and 4 to Part 1204—High Voltage Test Facility and Antenna System...

16 CFR Figures 3 and 4 to Part 1204 - High Voltage Test Facility and Antenna System Test Setup

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false High Voltage Test Facility and Antenna System Test Setup 3 Figures 3 and 4 to Part 1204 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... ANTENNAS Pt. 1204, Figs. 3, 4 Figures 3 and 4 to Part 1204—High Voltage Test Facility and Antenna System...

16 CFR Figures 3 and 4 to Part 1204 - High Voltage Test Facility and Antenna System Test Setup

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false High Voltage Test Facility and Antenna System Test Setup 3 Figures 3 and 4 to Part 1204 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... ANTENNAS Pt. 1204, Figs. 3, 4 Figures 3 and 4 to Part 1204—High Voltage Test Facility and Antenna System...

16 CFR Figures 3 and 4 to Part 1204 - High Voltage Test Facility and Antenna System Test Setup

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false High Voltage Test Facility and Antenna System Test Setup 3 Figures 3 and 4 to Part 1204 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... ANTENNAS Pt. 1204, Figs. 3, 4 Figures 3 and 4 to Part 1204—High Voltage Test Facility and Antenna System...

Human figure drawing distinguishes Alzheimer's patients: a cognitive screening test study.

PubMed

Stanzani Maserati, Michelangelo; D'Onofrio, Renato; Matacena, Corrado; Sambati, Luisa; Oppi, Federico; Poda, Roberto; De Matteis, Maddalena; Naldi, Ilaria; Liguori, Rocco; Capellari, Sabina

2018-05-01

To study human figure drawing in a group of Alzheimer's disease (AD) patients and compare it with a group of patients with mild cognitive impairment (MCI) and controls. We evaluated consecutive outpatients over a one-year period. Patients were classified as affected by AD or by MCI. All patients and controls underwent a simplified version of the human-figure drawing test and MMSE. A qualitative and quantitative analysis of all human figures was obtained. 112 AD, 100 MCI patients and 104 controls were enrolled. AD patients drew human figures poor in details and globally smaller than MCI patients and controls. Human figures drawn by MCI patients are intermediate in body height between those of the AD patients and the healthy subjects. The head-to-body ratio of human figures drawn by AD patients is greater than controls and MCI patients, while the human figure size-relative-to-page space index is significantly smaller. Body height is an independent predictor of cognitive impairment correlating with its severity and with the number of the figure's details. Human figures drawn by AD patients are different from those drawn by healthy subjects and MCI patients. Human figure drawing test is a useful tool for orienting cognitive impairment's diagnosis.

40 CFR 92.508 - Calculation and reporting of test results.

Code of Federal Regulations, 2014 CFR

2014-07-01

... expressed to one additional significant figure. (b) Final test results shall be calculated by summing the... contained in the applicable standard expressed to one additional significant figure. (c) Manufacturers and... additional significant figure. (d) If, subsequent to an initial failure of a production line test, the...

40 CFR 92.508 - Calculation and reporting of test results.

Code of Federal Regulations, 2011 CFR

2011-07-01

... expressed to one additional significant figure. (b) Final test results shall be calculated by summing the... contained in the applicable standard expressed to one additional significant figure. (c) Manufacturers and... additional significant figure. (d) If, subsequent to an initial failure of a production line test, the...

The influence of orientation on the stress rupture properties of nickel-base superalloy single crystals

NASA Technical Reports Server (NTRS)

Mackay, R. A.; Maier, R. D.

1982-01-01

Constant load creep rupture tests were performed on MAR-M247 single crystals at 724 MPa and 774 C where the effect of anisotropy is prominent. The initial orientations of the specimens as well as the final orientations of selected crystals after stress rupture testing were determined by the Laue back-reflection X-ray technique. The stress rupture lives of the MAR-M247 single crystals were found to be largely determined by the lattice rotations required to produce intersecting slip, because second-stage creep does not begin until after the onset of intersecting slip. Crystals which required large rotations to become oriented for intersecting slip exhibited the shortest stress rupture lives, whereas crystals requiring little or no rotations exhibited the lowest minimum creep rates, and consequently, the longest stress rupture lives.

Contraction fracture: From 90° to 120° crack intersections

NASA Astrophysics Data System (ADS)

Lazarus, V.; Gauthier, G.; Pauchard, L.

2009-12-01

Giant's Causeway, Port Arthur tessellated pavement, Bimini Road, Mars polygons (whose presence indicated past occurrence of water), fracture networks in permafrost, septarias are some more or less known examples of self-organized crack patterns that have intrigued people through out history. Even now, they are sometimes attributed to legendary figures : Giant's, Atlantis mythical citizens. These pavements are in fact formed by constrained shrinking of the media due, for instance, to cooling or drying leading to fracture. The crack networks form mostly 90° or 120° angles. Here, we report experiments allowing to control the transition between 90° and 120°. We show that the transition is governed by the linear elastic fracture mechanics energy minimization principle, hence by two parameters: the cell size and the Griffith's length (minimum crack length beyond which the bulk energy is not sufficient to allow its propagation). This was achieved by measuring the Griffith's length directly on the same type of experiments by changing the cell geometry. Example of 90 degree and 120 crack intersections. Top-left : Giant's Causeway hexagonal tessellated pavement, Ireland (courtesy A. Davaille). Top-right: Port Arthur rectangular tessellated pavement, Tasmania (courtesy Wayne Bentley). Bottom : septarias (courtesy A. Rifki and M. Toussaint)

The Implementation and Testing of a Robotic Arm on an Autonomous Vehicle

DTIC Science & Technology

2007-12-01

FIGURES Figure 1. BigFoot . .............................................................................................................2 Figure 2...Arm. ............................................................31 Figure 29. BigFoot launched a shaped charge model on the suspected IED...work with BigFoot . I would also like to thank you to LTCD Kirk Volland for his assistance in the implementation and testing of a robotic arm. I thank

Joint Strike Fighter: Additional Costs and Delays Risk Not Meeting Warfighter Requirements on Time

DTIC Science & Technology

2010-03-01

December 2009, only 4 of 13 test aircraft had been delivered and labor hours to build the aircraft had increased more than 50 percent above earlier...Table 7: Changes in Reported JSF Program Costs, Quantities, and Deliveries 40 Figures Figure 1: JSF Labor Hours for Manufacturing Test...Aircraft 15 Figure 2: Wing Station Labor Hours 16 Figure 3: Mate and Delivery Labor Hours 17 Figure 4: Growth in the Number of Engineering Design

16 CFR Figures 3 and 4 to Subpart... - Test Specimens

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test Specimens 3 Figures 3 and 4 to Subpart A of Part 1201 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT... Figures 3 and 4 to Subpart A of Part 1201—Test Specimens EC03OC91.006 ...

16 CFR Figures 3 and 4 to Subpart... - Test Specimens

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test Specimens 3 Figures 3 and 4 to Subpart A of Part 1201 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT... Figures 3 and 4 to Subpart A of Part 1201—Test Specimens EC03OC91.006 ...

16 CFR Figures 3 and 4 to Subpart... - Test Specimens

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test Specimens 3 Figures 3 and 4 to Subpart A of Part 1201 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT... Figures 3 and 4 to Subpart A of Part 1201—Test Specimens EC03OC91.006 ...

16 CFR Figure 9 to Part 1203 - Impact Test Apparatus

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Impact Test Apparatus 9 Figure 9 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 9 Figure 9 to Part 1203—Impact Test Apparatus ER10MR98...

16 CFR Figure 9 to Part 1203 - Impact Test Apparatus

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Impact Test Apparatus 9 Figure 9 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 9 Figure 9 to Part 1203—Impact Test Apparatus ER10MR98...

Object memory effects on figure assignment: conscious object recognition is not necessary or sufficient.

PubMed

Peterson, M A; de Gelder, B; Rapcsak, S Z; Gerhardstein, P C; Bachoud-Lévi, A

2000-01-01

In three experiments we investigated whether conscious object recognition is necessary or sufficient for effects of object memories on figure assignment. In experiment 1, we examined a brain-damaged participant, AD, whose conscious object recognition is severely impaired. AD's responses about figure assignment do reveal effects from memories of object structure, indicating that conscious object recognition is not necessary for these effects, and identifying the figure-ground test employed here as a new implicit test of access to memories of object structure. In experiments 2 and 3, we tested a second brain-damaged participant, WG, for whom conscious object recognition was relatively spared. Nevertheless, effects from memories of object structure on figure assignment were not evident in WG's responses about figure assignment in experiment 2, indicating that conscious object recognition is not sufficient for effects of object memories on figure assignment. WG's performance sheds light on AD's performance, and has implications for the theoretical understanding of object memory effects on figure assignment.

Scaling Flight Tests of Unmanned Air Vehicles

DTIC Science & Technology

2006-09-01

Figure Page Figure 1. Scaled Vehicle used to test Roll over propensity of automobiles . .................. 22 Figure 2. “Davicar...propensity of automobiles . In other research carried out at the University of Delft, Netherlands, the project DAVINCI was developed for

16 CFR Figures 3 and 4 to Part 1204 - High Voltage Test Facility and Antenna System Test Setup

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false High Voltage Test Facility and Antenna System Test Setup 3 Figures 3 and 4 to Part 1204 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR OMNIDIRECTIONAL CITIZENS BAND BASE STATION ANTENNAS Pt. 1204, Figs. 3, 4 Figures 3 and 4...

Preparation and applicability of a test of speech perception with pictures.

PubMed

Souza, Laís Flavia de; Braga, Gabriela Rosito Alvarez Bernardez; Mota, Ana Lúcia Rios; Zamberlan-Amorim, Nelma Ellen; Reis, Ana Cláudia Mirândola Barbosa

2016-01-01

To prepare and apply support material for responses to the Speech Recognition Percentage Index (SRPI) test in children. This is a descriptive, exploratory study conducted in two phases: in the first phase, 31 speech-language pathologists (referees) prepared material composed of regular, frequently used monosyllabic and disyllabic words belonging to the vocabulary of children and figures that could represent these words; the second phase consisted in the application of this material to 30 normal-hearing children aged 2 to 4 years and 11 months. The material consisted of 25 words and six boards with six figures each. The word selection criterion adopted by the referees included the initial phoneme and real, colorful figures familiar to the children. The mean scores of the children in the SRPI test were 93% (SD ± 8%) with the support of figures and 64% (SD ± 25%) without figure support. Comparison between the results obtained with and without the support of figures showed significant difference for 15 of the 25 test words, with higher scores with the use of supporting figures. Comparison between correct and incorrect responses using the support of figures showed significant difference only for the word "dog" ("cão") (p=0.0079). There was agreement among the referees with respect to the words and figures. The SRPI test can be rapidly and easily applied, allowing evaluation and systematic monitoring of speech perception ability regardless of child verbalization capacity.

The Effects of General and Homophobic Victimization on Adolescents' Psychosocial and Educational Concerns: The Importance of Intersecting Identities and Parent Support

ERIC Educational Resources Information Center

Poteat, V. Paul; Mereish, Ethan H.; DiGiovanni, Craig D.; Koenig, Brian W.

2011-01-01

Many adolescents experience peer victimization, which often can be homophobic. Applying the minority stress model with attention to intersecting social identities, this study tested the effects of general and homophobic victimization on several educational outcomes through suicidality and school belonging among 15,923 adolescents in Grades 7…

The wire optical test: a thorough analytical study in and out of caustic surface, and advantages of a dynamical adaptation

NASA Astrophysics Data System (ADS)

Alejandro Juárez-Reyes, Salvador; Sosa-Sánchez, Citlalli Teresa; Silva-Ortigoza, Gilberto; de Jesús Cabrera-Rosas, Omar; Espíndola-Ramos, Ernesto; Ortega-Vidals, Paula

2018-03-01

Among the best known non-interferometric optical tests are the wire test, the Foucault test and Ronchi test with a low frequency grating. Since the wire test is the seed to understand the other ones, the aim of the present work is to do a thorough study of this test for a lens with symmetry of revolution and to do this study for any configuration of the object and detection planes where both planes could intersect: two, one or no branches of the caustic region (including the marginal and paraxial foci). To this end, we calculated the vectorial representation for the caustic region, and we found the analytical expression for the pattern; we report that the analytical pattern explicitly depends on the magnitude of a branch of the caustic. With the analytical pattern we computed a set of simulations of a dynamical adaptation of the optical wire test. From those simulations, we have done a thorough analysis of the topological structure of the pattern; so we explain how the multiple image formation process and the image collapse process take place for each configuration, in particular, when both the wire and the detection planes are placed inside the caustic region, which has not been studied before. For the first time, we remark that not only the intersections of the object and detection planes with the caustic are important in the change of pattern topology; but also the projection of the intersection between the caustic and the object plane mapped onto the detection plane; and the virtual projection of the intersection between the caustic and the detection plane mapped onto the object plane. We present that for the new configurations of the optical system, the wire image is curves of the Tschirnhausen’s cubic, the piriform and the deformed eight-curve types.

Visual Processing in Adolescents with Autism Spectrum Disorder: Evidence from Embedded Figures and Configural Superiority Tests

ERIC Educational Resources Information Center

Dillen, Claudia; Steyaert, Jean; Op de Beeck, Hans P.; Boets, Bart

2015-01-01

The embedded figures test has often been used to reveal weak central coherence in individuals with autism spectrum disorder (ASD). Here, we administered a more standardized automated version of the embedded figures test in combination with the configural superiority task, to investigate the effect of contextual modulation on local feature…

16 CFR Figure 1 to Part 1633 - Test Assembly, Shown in Furniture Calorimeter (Configuration A)

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Test Assembly, Shown in Furniture Calorimeter (Configuration A) 1 Figure 1 to Part 1633 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1 Figure 1 to Part 1633—Test Assembly, Shown in Furniture Calorimeter (Configuration A) ER15MR06.000 ...

16 CFR Figure 1 to Part 1633 - Test Assembly, Shown in Furniture Calorimeter (Configuration A)

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test Assembly, Shown in Furniture Calorimeter (Configuration A) 1 Figure 1 to Part 1633 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1 Figure 1 to Part 1633—Test Assembly, Shown in Furniture Calorimeter (Configuration A) ER15MR06.000 ...

16 CFR Figure 1 to Part 1633 - Test Assembly, Shown in Furniture Calorimeter (Configuration A)

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test Assembly, Shown in Furniture Calorimeter (Configuration A) 1 Figure 1 to Part 1633 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1 Figure 1 to Part 1633—Test Assembly, Shown in Furniture Calorimeter (Configuration A) ER15MR06.000 ...

16 CFR Figure 1 to Part 1633 - Test Assembly, Shown in Furniture Calorimeter (Configuration A)

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test Assembly, Shown in Furniture Calorimeter (Configuration A) 1 Figure 1 to Part 1633 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1 Figure 1 to Part 1633—Test Assembly, Shown in Furniture Calorimeter (Configuration A) ER15MR06.000 ...

16 CFR Figure 2 to Part 1513 - Test Probe for Neck Entrapment

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test Probe for Neck Entrapment 2 Figure 2 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 2 Figure 2 to Part 1513—Test Probe for Neck Entrapment...

16 CFR Figure 2 to Part 1513 - Test Probe for Neck Entrapment

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test Probe for Neck Entrapment 2 Figure 2 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 2 Figure 2 to Part 1513—Test Probe for Neck Entrapment...

16 CFR Figure 2 to Part 1513 - Test Probe for Neck Entrapment

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Test Probe for Neck Entrapment 2 Figure 2 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 2 Figure 2 to Part 1513—Test Probe for Neck Entrapment...

16 CFR Figure 2 to Part 1513 - Test Probe for Neck Entrapment

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Test Probe for Neck Entrapment 2 Figure 2 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 2 Figure 2 to Part 1513—Test Probe for Neck Entrapment...

16 CFR Figure 2 to Part 1513 - Test Probe for Neck Entrapment

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test Probe for Neck Entrapment 2 Figure 2 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 2 Figure 2 to Part 1513—Test Probe for Neck Entrapment...

The role of shape recognition in figure/ground perception in infancy.

PubMed

White, Hannah; Jubran, Rachel; Heck, Alison; Chroust, Alyson; Bhatt, Ramesh S

2018-04-30

In this study we sought to determine whether infants, like adults, utilize previous experience to guide figure/ground processing. After familiarization to a shape, 5-month-olds preferentially attended to the side of an ambiguous figure/ground test stimulus corresponding to that shape, suggesting that they were viewing that portion as the figure. Infants' failure to exhibit this preference in a control condition in which both sides of the test stimulus were displayed as figures indicated that the results in the experimental condition were not due to a preference between two figure shapes. These findings demonstrate for the first time that figure/ground processing in infancy is sensitive to top-down influence. Thus, a critical aspect of figure/ground processing is functional early in life.

Assessing the Use of Game-Based Exercises in the Staff Attack-the-Network Course

DTIC Science & Technology

2015-06-01

B-1 vi CONTENTS (continued) Page LIST OF FIGURES FIGURE 1. EDGE PLAYER AVATAR ...players to control an in-game avatar (see Figure 1), navigate terrain, and use vehicles, 3 equipment, and tools for a variety of social-cultural task... Avatar . Figure 2. EDGE Operational Environment. Method The basic methodology consisted of collecting pre-test and post-test knowledge

Predictions of Helmet Pad Suspension System Performance using Isolated Pad Impact Results

DTIC Science & Technology

2010-09-13

Equation 2 and Equation 3, respectively. 3. METHOD The primary method of data collection for this report is detailed in the 2008 Joint Live Fire ...tests and the helmet system tests (see Figure 3). All testing was performed with a monorail drop tower (see Figure 4) at three conditioning...right) and system test setup (right and center left) Figure 5. MEP monorail drop test setup with a hemispherical impactor (left and center left

TSP Symposium 2013 Proceedings

DTIC Science & Technology

2014-01-01

test and Post - test Results of the Experimental Group Our results show that the experimental group improved on the post - test compared...4.3.4 Design of the Learning Strategy 27 4.4 Results 28 4.4.1 Post - test 28 4.4.2 Analysis of the Results 28 4.4.3 Analysis of the Results from the...Estimation Accuracy) 17 Figure 5: Methodology for the Research 24 Figure 6: Question 1, Time Control for Post - test 28 Figure 7:

Influences of hydraulic gradient, surface roughness, intersecting angle, and scale effect on nonlinear flow behavior at single fracture intersections

NASA Astrophysics Data System (ADS)

Li, Bo; Liu, Richeng; Jiang, Yujing

2016-07-01

Fluid flow tests were conducted on two crossed fracture models for which the geometries of fracture segments and intersections were measured by utilizing a visualization technique using a CCD (charged coupled device) camera. Numerical simulations by solving the Navier-Stokes equations were performed to characterize the fluid flow at fracture intersections. The roles of hydraulic gradient, surface roughness, intersecting angle, and scale effect in the nonlinear fluid flow behavior through single fracture intersections were investigated. The simulation results of flow rate agreed well with the experimental results for both models. The experimental and simulation results showed that with the increment of the hydraulic gradient, the ratio of the flow rate to the hydraulic gradient, Q/J, decreases and the relative difference of Q/J between the calculation results employing the Navier-Stokes equations and the cubic law, δ, increases. When taking into account the fracture surface roughness quantified by Z2 ranging 0-0.42 for J = 1, the value of δ would increase by 0-10.3%. The influences of the intersecting angle on the normalized flow rate that represents the ratio of the flow rate in a segment to the total flow rate, Ra, and the ratio of the hydraulic aperture to the mechanical aperture, e/E, are negligible when J < 10-3, whereas their values change significantly when J > 10-2. Based on the regression analysis on simulation results, a mathematical expression was proposed to quantify e/E, involving variables of J and Rr, where Rr is the radius of truncating circles centered at an intersection. For E/Rr > 10-2, e/E varies significantly and the scale of model has large impacts on the nonlinear flow behavior through intersections, while for E/Rr < 10-3, the scale effect is negligibly small. Finally, a necessary condition to apply the cubic law to fluid flow through fracture intersections is suggested as J < 10-3, E/Rr < 10-3, and Z2 = 0.

Incorporating intersectionality theory into population health research methodology: challenges and the potential to advance health equity.

PubMed

Bauer, Greta R

2014-06-01

Intersectionality theory, developed to address the non-additivity of effects of sex/gender and race/ethnicity but extendable to other domains, allows for the potential to study health and disease at different intersections of identity, social position, processes of oppression or privilege, and policies or institutional practices. Intersectionality has the potential to enrich population health research through improved validity and greater attention to both heterogeneity of effects and causal processes producing health inequalities. Moreover, intersectional population health research may serve to both test and generate new theories. Nevertheless, its implementation within health research to date has been primarily through qualitative research. In this paper, challenges to incorporation of intersectionality into population health research are identified or expanded upon. These include: 1) confusion of quantitative terms used metaphorically in theoretical work with similar-sounding statistical methods; 2) the question of whether all intersectional positions are of equal value, or even of sufficient value for study; 3) distinguishing between intersecting identities, social positions, processes, and policies or other structural factors; 4) reflecting embodiment in how processes of oppression and privilege are measured and analysed; 5) understanding and utilizing appropriate scale for interactions in regression models; 6) structuring interaction or risk modification to best convey effects, and; 7) avoiding assumptions of equidistance or single level in the design of analyses. Addressing these challenges throughout the processes of conceptualizing and planning research and in conducting analyses has the potential to improve researchers' ability to more specifically document inequalities at varying intersectional positions, and to study the potential individual- and group-level causes that may drive these observed inequalities. A greater and more thoughtful incorporation of intersectionality can promote the creation of evidence that is directly useful in population-level interventions such as policy changes, or that is specific enough to be applicable within the social contexts of affected communities. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.

Saccadic velocity measurements in strabismus.

PubMed Central

Metz, H S

1983-01-01

Traditional evaluation of strabismus has included cover test measurements, evaluation of the range of ocular rotations, and an array of subjective sensory tests. These studies could not always differentiate paresis of an extraocular muscle from restrictions and from various neuro-ophthalmic motility disorders. The measurement of horizontal and vertical saccadic movements can provide an objective test of rectus muscle function. Using EOG, saccades can be recorded easily, inexpensively, and repeatably at any age. In ocular muscle paresis or paralysis, saccadic speed is reduced mildly to markedly and can be used to monitor recovery. Assessment of saccadic velocity does not appear useful in evaluating superior oblique palsy, although it is valuable in sixth nerve palsy, Duane's syndrome, and third nerve palsy. When restrictions are the major cause of limited rotation, as in thyroid ophthalmopathy and orbital floor fracture, saccadic speed is unaffected. The induction of OKN or vestibular nystagmus is helpful in the study of children too young to perform voluntary saccadic movements. In patients with limitation of elevation or depression, this technique can separate innervational from mechanical causes of diminished rotation. The specific saccadic velocity pattern in myasthenia gravis, progressive external ophthalmoplegia, internuclear ophthalmoplegia, and Möbius' syndrome is helpful in differentiating these disorders from other neuroophthalmic motility problems. Transposition surgery of the rectus muscle is effective because of an increase in force, seen as an improvement in saccadic velocity and resulting from the change of insertion of the muscles. Saccadic velocities can also be of assistance in diagnosing a lost or disinserted muscle following surgery for strabismus. Although analysis of saccadic velocity is not required for the proper evaluation of all problems in strabismus and motility, it can be of inestimable value in the diagnosis of many complex and confusing disorders. Together with forced duction testing, a clinical profile can be obtained concerning muscle force and muscle and orbital restrictions, which are required information for appropriate surgical planning. Images FIGURE 25 FIGURE 1 FIGURE 2 FIGURE 5 FIGURE 6 FIGURE 10 FIGURE 11 FIGURE 12 FIGURE 13 FIGURE 16 FIGURE 18 FIGURE 19 FIGURE 28 FIGURE 29 FIGURE 43 FIGURE 44 PMID:6676980

2. REAR ELEVATION OF ENGINE TEST CELL BUILDING. LOOKING SOUTHEAST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. REAR ELEVATION OF ENGINE TEST CELL BUILDING. LOOKING SOUTHEAST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

An Approach to Analyze Personnel Injury of Reflective Spall from Small-Arms Protective Body Armor

DTIC Science & Technology

2011-07-01

2  Figure 2. Protective plate system on the ORCA human anatomy . .................................................2  Figure 3...stature and is fitted with a medium size protective plate. Representation of the ORCA human anatomy wearing the protective plate system is shown in...Figure 1. Gelatin block placement for experimental testing. Figure 2. Protective plate system on the ORCA human anatomy . Ballistic Gelatin Test

A Novel Way to Relate Ontology Classes

PubMed Central

Choksi, Ami T.; Jinwala, Devesh C.

2015-01-01

The existing ontologies in the semantic web typically have anonymous union and intersection classes. The anonymous classes are limited in scope and may not be part of the whole inference process. The tools, namely, the pellet, the jena, and the protégé, interpret collection classes as (a) equivalent/subclasses of union class and (b) superclasses of intersection class. As a result, there is a possibility that the tools will produce error prone inference results for relations, namely, sub-, union, intersection, equivalent relations, and those dependent on these relations, namely, complement. To verify whether a class is complement of other involves utilization of sub- and equivalent relations. Motivated by the same, we (i) refine the test data set of the conference ontology by adding named, union, and intersection classes and (ii) propose a match algorithm to (a) calculate corrected subclasses list, (b) correctly relate intersection and union classes with their collection classes, and (c) match union, intersection, sub-, complement, and equivalent classes in a proper sequence, to avoid error prone match results. We compare the results of our algorithms with those of a candidate reasoner, namely, the pellet reasoner. To the best of our knowledge, ours is a unique attempt in establishing a novel way to relate ontology classes. PMID:25984560

14. ENGINE TEST CELL BUILDING ROOF. VENTILATION AND COOLING TOWERS. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. ENGINE TEST CELL BUILDING ROOF. VENTILATION AND COOLING TOWERS. LOOKING EAST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

10. ENGINE TEST CELL BUILDING INTERIOR. CELL 4, MOUNTING STAND. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. ENGINE TEST CELL BUILDING INTERIOR. CELL 4, MOUNTING STAND. LOOKING NORTHWEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

Suitability of the line intersect method for sampling hardwood logging residues

Treesearch

A. Jeff Martin

1976-01-01

The line intersect method of sampling logging residues was tested in Appalachian hardwoods and was found to provide unbiased estimates of the volume of residue in cubic feet per acre. Thirty-two chains of sample line were established on each of sixteen 1-acre plots on cutover areas in a variety of conditions. Estimates from these samples were then compared to actual...

The Development of Barrier Materials for Flexible Aircraft Engine Containers

DTIC Science & Technology

1977-05-01

niif ^»imi,ii ^WMM 1 i...ÄWMHWÜippHI ■" ’ " ■ " -" I—i»*f^^ MM^Mimai ^m t Figure 7. Figure 8. Figure 9 . Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure...Evaluation Program 8 Barrier Material Test Data 9 iv % •■■~v’ ■ ■Ä’ ■" mam --"■- ——,«. ms"-- «r MlMiafhf^ - ■"’ ^-g^aaa--^-^^"’^-’

Preschool visual acuity screening tests.

PubMed Central

Friendly, D S

1978-01-01

The purpose of the study was to evaluate the relative merits of two screening tests used for visual acuity assessment of preschool children. The tests that were compared were the Good-Lite Company versions of the E-Test and of the STYCAR (Screening Test for Young Children and Retardates). The former is the most popular method for evaluating central acuity in young children in this nation; the STYCAR is a relatively new letter-matching-test developed in England, where it is widely employed. The E-Test poses left-right orientation problems which are eliminated by the symmetrical letters H, T, O and V utilized in the Letter-Matching-Test. Both visual acuity tests were administered on two separate occasions by personnel from the Prevention of Blindness Society of Metropolitan Washington to 633 preschool children in Washington, D.C. By random selection, 150 of the children received the E-Test at both sessions, 162 children received the Letter-Matching-Test at both sessions, 160 chilt athe the second session, and 161 children received the Letter-Matching-Test at the first session and the E-Test at the second session. The author medically examined the eyes of 408 of the 633 children without knowledge of which test had been initially administered. Statistical analysis of the data obtained from the study indicated that the Letter-Matching-Test was significantly better in terms of testability rates, group and individual instruction time, and performance time. The E-Test was more reliable in terms of test-retest acuity scores and was also more valid in terms of agreement between pass-fail results obtained at the first screening session and two levels of pass-fail refraction criteria. Images FIGURE 4 FIGURE 5 FIGURE 7 A FIGURE 7 B FIGURE 9 A FIGURE 9 B PMID:754379

The Effect of Malathion on the Activity and Performance of Activated Sludge

DTIC Science & Technology

2015-03-26

33 and 59 µg O2 min-1. The oxygen consumption curves were similar in each case, beginning with rapid oxygen AFIT-ENV-MS-15-M-197 v...3: Respirometry Test 6 – Cumulative Oxygen Consumption ............................... 45 Figure 4: SOUR for Malathion Concentrations in Activated...76 Figure 20: Respirometry Test 1 – Cumulative Oxygen Consumption ............................. 86 Figure 21: Respirometry Test 1

Bayesian inference and interpretation of centroid moment tensors of the 2016 Kumamoto earthquake sequence, Kyushu, Japan

NASA Astrophysics Data System (ADS)

Hallo, Miroslav; Asano, Kimiyuki; Gallovič, František

2017-09-01

On April 16, 2016, Kumamoto prefecture in Kyushu region, Japan, was devastated by a shallow M JMA7.3 earthquake. The series of foreshocks started by M JMA6.5 foreshock 28 h before the mainshock. They have originated in Hinagu fault zone intersecting the mainshock Futagawa fault zone; hence, the tectonic background for this earthquake sequence is rather complex. Here we infer centroid moment tensors (CMTs) for 11 events with M JMA between 4.8 and 6.5, using strong motion records of the K-NET, KiK-net and F-net networks. We use upgraded Bayesian full-waveform inversion code ISOLA-ObsPy, which takes into account uncertainty of the velocity model. Such an approach allows us to reliably assess uncertainty of the CMT parameters including the centroid position. The solutions show significant systematic spatial and temporal variations throughout the sequence. Foreshocks are right-lateral steeply dipping strike-slip events connected to the NE-SW shear zone. Those located close to the intersection of the Hinagu and Futagawa fault zones are dipping slightly to ESE, while those in the southern area are dipping to WNW. Contrarily, aftershocks are mostly normal dip-slip events, being related to the N-S extensional tectonic regime. Most of the deviatoric moment tensors contain only minor CLVD component, which can be attributed to the velocity model uncertainty. Nevertheless, two of the CMTs involve a significant CLVD component, which may reflect complex rupture process. Decomposition of those moment tensors into two pure shear moment tensors suggests combined right-lateral strike-slip and normal dip-slip mechanisms, consistent with the tectonic settings of the intersection of the Hinagu and Futagawa fault zones.[Figure not available: see fulltext.

12. ENGINE TEST CELL BUILDING INTERIOR. DETAIL OF CONTROL CONSOLE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. ENGINE TEST CELL BUILDING INTERIOR. DETAIL OF CONTROL CONSOLE FOR ENGINE TEST CELL 4. LOOKING NORTH. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

Experimental postoperative endophthalmitis.

PubMed Central

Forster, R K

1992-01-01

Various inocula of vancomycin-sensitive E faecalis (EF01), S aureus (SA02), S epidermidis (SE03), and B cereus (BC04), were intravitreally inoculated into an aphakic rabbit model with and without vancomycin, with or without vitrectomy. A summation average of the clinical response mean scores of various inocula (10(3), 10(5), 10(7) cfu) in the absence of therapy ranked these etiologic agents in the order of severity as SE03 (1.4), BC04 (1.8), EF01 (2.3), and SA02 (2.8). These favorably compared with the histopathology cavitary/noncavitary mean scores in increasing order of severity: SE03 (1.7/0.6), BC04 (1.7/0.9), EF01 (2.4/1.1), and SA02 (2.5/1.5), compared with control eyes (1.1/0.4). If the inoculum was increased to 10(7) cfu, SE03 (2.4/0.9) and BC04 (2.8/2.0) could equate EF01 and SA02. Treatment with 1 mg of vancomycin, with or without vitrectomy, did not significantly alter the overall inflammatory response to these four endophthalmitis isolates. No treatment was necessary to achieve > 99.9% killing effect by 72 hours when testing BC04, while any of the treatment modalities during 72 hours achieved 99.9% killing effect when testing SE03. No treatment modality achieved a 99.9% killing effect when testing EF01 or SA02. No single in vitro result could predict the in vivo microbiologic behavior of this model. Further research is needed to better understand the role of antiinflammatory agents, multiple drug therapy, and multiple-injection single-drug therapy with or without vitrectomy, and their impact on the inflammatory response in the aphakic model, to better treat endophthalmitis and thus improve visual prognosis. Images FIGURE 17 A FIGURE 17 B FIGURE 17 C FIGURE 18 A FIGURE 18 B FIGURE 18 C FIGURE 19 A FIGURE 19 B FIGURE 19 C FIGURE 20 A FIGURE 20 B FIGURE 20 C FIGURE 31 A FIGURE 31 B FIGURE 32 A FIGURE 32 B FIGURE 33 A FIGURE 33 B FIGURE 34 A FIGURE 34 B PMID:1494833

8. ENGINE TEST CELL BUILDING INTERIOR. LONGITUDINAL CENTRAL PASSAGEWAY IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. ENGINE TEST CELL BUILDING INTERIOR. LONGITUDINAL CENTRAL PASSAGEWAY IN BASEMENT. LOOKING SOUTHWEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

5. ENGINE TEST CELL BUILDING INTERIOR. CENTRAL ROOM ON MAIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. ENGINE TEST CELL BUILDING INTERIOR. CENTRAL ROOM ON MAIN FLOOR. LOOKING NORTHWEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

15. HISTORIC PHOTOGRAPH. ENGINE TEST CELL BUILDING FRONT FACADE DATED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. HISTORIC PHOTOGRAPH. ENGINE TEST CELL BUILDING FRONT FACADE DATED CA. 1975. LOOKING NORTH. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

4. FRONT FACADE OF ENGINE TEST CELL BUILDING. DETAIL OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. FRONT FACADE OF ENGINE TEST CELL BUILDING. DETAIL OF MAIN ENTRY. LOOKING NORTHWEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

6. ENGINE TEST CELL BUILDING INTERIOR. CENTRAL OFFICE AREA ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. ENGINE TEST CELL BUILDING INTERIOR. CENTRAL OFFICE AREA ON BASEMENT LEVEL. LOOKING WEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

3. FRONT FACADE OF ENGINE TEST CELL BUILDING. VIEW OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. FRONT FACADE OF ENGINE TEST CELL BUILDING. VIEW OF NORTHEAST WING. LOOKING WEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

Novel Robotic Tools for Piping Inspection and Repair, Phase 1

DTIC Science & Technology

2014-02-13

35 Figure 57 - Accowle ODVS cross section and reflective path ......................................... 36 Figure 58 - Leopard Imaging HD...mounted to iPhone ............................................................................. 39 Figure 63 - Kogeto mounted to Leopard Imaging HD...40 Figure 65 - Leopard Imaging HD camera pipe test (letters) ............................................. 40 Figure 66 - Leopard Imaging HD camera

40 CFR 90.709 - Calculation and reporting of test results.

Code of Federal Regulations, 2014 CFR

2014-07-01

... expressed to one additional significant figure. (b) Final test results are calculated by summing the initial... applicable standard expressed to one additional significant figure. (c) The final deteriorated test results...

40 CFR 90.709 - Calculation and reporting of test results.

Code of Federal Regulations, 2011 CFR

2011-07-01

... expressed to one additional significant figure. (b) Final test results are calculated by summing the initial... applicable standard expressed to one additional significant figure. (c) The final deteriorated test results...

Kinematics at the Intersection of the Garlock and Death Valley Fault Zones, California: Integration of TM Data and Field Studies

NASA Technical Reports Server (NTRS)

Verosub, Kenneth L.; Brady, Roland H., III; Abrams, Michael

1989-01-01

Kinematic relationships at the intersection of the southern Death Valley and Garlock fault zones were examined to identify and delineate the eastern structural boundary between the Mojave and the Basin and Range geologic terrains, and to construct a model for the evolution of this boundary through time. In order to accomplish this, satellite imagery was combined with field investigations to study six areas in the vicinity of the intersection, or possible extensions, of the fault zones. The information gathered from these areas allows the test of various hypotheses that were proposed to explain the interaction between the Death Valley and Garlock fault zones.

50 CFR Figure 7 to Part 679 - Location of Trawl Gear Test Areas in the GOA and the BSAI

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Location of Trawl Gear Test Areas in the GOA and the BSAI 7 Figure 7 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT... EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679, Fig. 7 Figure 7 to Part 679—Location of Trawl Gear Test Areas in...

Real-Time Parallel Software Design Case Study: Implementation of the RASSP SAR Benchmark on the Intel Paragon.

DTIC Science & Technology

1996-01-01

Real-Time 19 5 Conclusion 23 List of References 25 ii LIST OF FIGURES FIGURE PAGE 3-1 Test Bench Pseudo Code 7 3-2 Fast Convolution...3-1 shows pseudo - code for a test bench with two application nodes. The outer test bench wrapper consists of three functions: pipeline_init, pipeline...exit_func); Figure 3-1. Test Bench Pseudo Code The application wrapper is contained in the pipeline routine and similarly consists of an

16 CFR Figure 7 to Part 1203 - Typical Test Apparatus for Positional Stability Test

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Typical Test Apparatus for Positional Stability Test 7 Figure 7 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER...—Typical Test Apparatus for Positional Stability Test ER10MR98.007 ...

16 CFR Figure 7 to Part 1203 - Typical Test Apparatus for Positional Stability Test

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Typical Test Apparatus for Positional Stability Test 7 Figure 7 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER...—Typical Test Apparatus for Positional Stability Test ER10MR98.007 ...

Characterization of a remotely intersected set of hydraulic fractures: Results of intersection well no. 1-B, GRI/DOE multi-site project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branagan, P.T.; Peterson, R.E.; Warpinski, N.R.

A deviated observation or {open_quotes}intersection{close_quotes} well (IW 1-B) was drilled, cored, logged and tested through an area in a fluvial sandstone reservoir that had previously been hydraulically fractured. The point of intersection with the fractured interval was located 126 ft from the fracture well along one wing of the fracture(s) at a measured depth of 4,675 ft. Direct observations from core and borehole imagery logs in IW 1-B indicate that a total of 11 far-field vertical fractures were created. Clustered in a narrow 2.6-ft-wide interval, these 11 fractures are the direct result of 6 experimental fracture treatments executed in themore » distant frac well over a 4-month period. Diagnostic data acquired through IW I-B included direct core observations and measurements, borehole log imagery, gamma ray (GR) tracer identification, well-to-well pressure transient and fracture conductivity tests, and production logging surveys. The explicit intent in the emplacement of IW 1-B was to provide direct observations and information to characterize the hydraulic fracture(s) in support of a remote-sensing fracture diagnostic program that included microseismic monitoring and inclinometer measurements.« less

Early Detection of Prostate Cancer

DTIC Science & Technology

2007-01-01

pads and the external traces. Figure 13 shows the copper board with SMA connectors which were used to test the SH-SAW devices. The frequency...Figure 11. 3-dimensional view of the final device. Figure 12. Fabricated SH-SAW devices cut on blue tape. Figure 13. SH-SAW devices on copper board...Figure 12. Fabricated SH-SAW devices cut on blue tape. 46 Figure 13. SH-SAW devices on copper board with SMA connectors. 47 Figure 14

Examining the Return on Investment of Test and Evaluation

DTIC Science & Technology

2015-03-26

Problem Discovery Cases Observed in DOT&E Oversight Programs ............... 4 Figure 2. DoD T&E Organizational Structure...11 Figure 3. Product Maturity Levels Commercial Firms Seek to Validate ........................ 23 Figure 4 ...beginning in its fiscal year (FY) 2011 report, the Director, Operational Test and Evaluation (DOT&E), started reporting significant issues observed

Testing of a Stacked Core Mirror for UV Applications

NASA Technical Reports Server (NTRS)

Matthews, Gary W.; Kirk, Charles S.; Maffett, Steven P.; Abplanalp, Calvin E.; Stahl, H. Philip; Eng, Ron; Arnold, William R. Sr.

2013-01-01

Advanced Ultraviolet, Optical, Near-Infrared (UVOIR) Mirror Technology Development (AMTD) Testing Summary: (1) Processing of the stacked core mirror converged very quickly using ion figuring. (2) Results show no significant PSD change due to ion figuring in spatial periods smaller than 20mm. (3) Global surface figure limited by mount repeatability

49 CFR Appendix - Figures to Subpart T of Part 572

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Figures to Subpart T of Part 572 Appendix Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) Appendix—Figures...

49 CFR Appendix - Figures to Subpart T of Part 572

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Figures to Subpart T of Part 572 Appendix Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) Appendix—Figures...

11. ENGINE TEST CELL BUILDING INTERIOR. CONTROL ROOM FOR CELLS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. ENGINE TEST CELL BUILDING INTERIOR. CONTROL ROOM FOR CELLS 2 AND 4. LOOKING SOUTHEAST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

13. ENGINE TEST CELL BUILDING INTERIOR. EQUIPMENT ROOM SERVING CELLS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. ENGINE TEST CELL BUILDING INTERIOR. EQUIPMENT ROOM SERVING CELLS 2 AND 4. LOOKING SOUTHEAST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

7. ENGINE TEST CELL BUILDING INTERIOR. WALL MAP IN CENTRAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. ENGINE TEST CELL BUILDING INTERIOR. WALL MAP IN CENTRAL BASEMENT OFFICE AREA. LOOKING SOUTHWEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

Investigation of Performance Improvements Including Application of Inlet Guide Vanes to a Cross-flow Fan

DTIC Science & Technology

2009-09-01

25 Figure 17. IGV Cut Out from Fluid Domain...Figure 22. Installed IGVS as Viewed from the CFF Inlet.................................................30 Figure 23. Schematic of Turbine Test Rig (TTR...44 Figure 28. Close In View of Velocity Vector Plot Near IGVS for 6IGV Model..............45 Figure 29

40 CFR 90.509 - Calculation and reporting of test results.

Code of Federal Regulations, 2014 CFR

2014-07-01

... contained in the applicable emission standard expressed to one additional significant figure. ASTM E29-93a... additional significant figure. (2) Final deteriorated test results (for Phase 2 test engines only) are...

16 CFR Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Location of Test Lines for Helmets Intended for Persons Ages 1 and Older 5 Figure 5 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 5 Figure 5 to Part 1203—Location of Test Lines fo...

16 CFR Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Location of Test Lines for Helmets Intended for Persons Ages 1 and Older 5 Figure 5 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 5 Figure 5 to Part 1203—Location of Test Lines fo...

16 CFR Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Location of Test Lines for Helmets Intended for Persons Ages 1 and Older 5 Figure 5 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 5 Figure 5 to Part 1203—Location of Test Lines fo...

Support for a Link between the Local Processing Bias and Social Deficits in Autism: An Investigation of Embedded Figures Test Performance in Non-Clinical Individuals

ERIC Educational Resources Information Center

Russell-Smith, Suzanna N.; Maybery, Murray T.; Bayliss, Donna M.; Sng, Adelln A. H.

2012-01-01

The aim of this investigation was to explore the degree to which specific subsets of autistic-like traits relate to performance on the Embedded Figures Test (Witkin et al. in A manual for the embedded figures test. Consulting Psychologists Press, Palo Alto, CA, 1971). In the first group-based investigation with this focus, students were selected…

Effects of countdown timers on driver behavior after the yellow onset at Chinese intersections.

PubMed

Long, Kejun; Han, Lee D; Yang, Qiang

2011-10-01

Few studies have focused on the effect of countdown timers at signalized intersections in China, where such timers are widely deployed for their perceived benefits of increased safety and capacity. This study examines the effect of countdown timers on driver behavior during the yellow interval. Signal phasing and traffic operations were videotaped at 4 comparable signalized intersections under normal conditions. Microscopic details were extracted manually at 25 Hz to yield 24 h of data on onset time of the yellow, onset time of the red, driver location and actions after the onset of the yellow, red light-running violations, etc. For comparable intersections with and without countdown timers, driver behavior measured by driver decision (stop or go) and vehicle entry time (when the vehicle crosses the stop line) were analyzed using binary logistical regression (BLR) and a nonparametric test, respectively. The results suggest that countdown timers can indeed influence driver behaviors, in terms of decisions to stop or cross the intersection as well as the distribution of vehicle entry times. There was a strong correlation between the presence of countdown timers and an increase in red light violations. Countdown timers may lead to increased entrance into the intersection during the later portions of the yellow and even the red. This alarming finding calls for further research as well as for serious consideration before the field deployment of countdown timers.

Differential arrest and adhesion of tumor cells and microbeads in the microvasculature

PubMed Central

Guo, Peng; Cai, Bin; Lei, Ming; Liu, Yang

2013-01-01

To investigate the mechanical mechanisms behind tumor cell arrest in the microvasculature, we injected fluorescently labeled human breast carcinoma cells or similarly sized rigid beads into the systemic circulation of a rat. Their arrest patterns in the microvasculature of mesentery were recorded and quantified. We found that 93% of rigid beads were arrested either at arteriole–capillary intersections or in capillaries. Only 3% were at the capillary–postcapillary venule intersections and in postcapillary venules. In contrast, most of the flexible tumor cells were either entrapped in capillaries or arrested at capillary or postcapillary venule–postcapillary venule intersections and in postcapillary venules. Only 12% of tumor cells were arrested at the arteriole–capillary intersections. The differential arrest and adhesion of tumor cells and microbeads in the microvasculature was confirmed by a χ2 test (p < 0.001). These results demonstrate that mechanical trapping was responsible for almost all the arrest of beads and half the arrest of tumor cells. Based on the measured geometry and blood flow velocities at the intersections, we also performed a numerical simulation using commercial software (ANSYS CFX 12.01) to depict the detailed distribution profiles of the velocity, shear rate, and vorticity at the intersections where tumor cells preferred to arrest and adhere. Simulation results reveal the presence of localized vorticity and shear rate regions at the turning points of the microvessel intersections, implying that hemodynamic factors play an important role in tumor cell arrest in the microcirculation. Our study helps elucidate long-debated issues related to the dominant factors in early-stage tumor hematogenous metastasis. PMID:23880911

Differential arrest and adhesion of tumor cells and microbeads in the microvasculature.

PubMed

Guo, Peng; Cai, Bin; Lei, Ming; Liu, Yang; Fu, Bingmei M

2014-06-01

To investigate the mechanical mechanisms behind tumor cell arrest in the microvasculature, we injected fluorescently labeled human breast carcinoma cells or similarly sized rigid beads into the systemic circulation of a rat. Their arrest patterns in the microvasculature of mesentery were recorded and quantified. We found that 93% of rigid beads were arrested either at arteriole-capillary intersections or in capillaries. Only 3% were at the capillary-postcapillary venule intersections and in postcapillary venules. In contrast, most of the flexible tumor cells were either entrapped in capillaries or arrested at capillary or postcapillary venule-postcapillary venule intersections and in postcapillary venules. Only 12% of tumor cells were arrested at the arteriole-capillary intersections. The differential arrest and adhesion of tumor cells and microbeads in the microvasculature was confirmed by a χ(2) test (p < 0.001). These results demonstrate that mechanical trapping was responsible for almost all the arrest of beads and half the arrest of tumor cells. Based on the measured geometry and blood flow velocities at the intersections, we also performed a numerical simulation using commercial software (ANSYS CFX 12.01) to depict the detailed distribution profiles of the velocity, shear rate, and vorticity at the intersections where tumor cells preferred to arrest and adhere. Simulation results reveal the presence of localized vorticity and shear rate regions at the turning points of the microvessel intersections, implying that hemodynamic factors play an important role in tumor cell arrest in the microcirculation. Our study helps elucidate long-debated issues related to the dominant factors in early-stage tumor hematogenous metastasis.

Friction Stir Weld Restart+Reweld Repair Allowables

NASA Technical Reports Server (NTRS)

Clifton, Andrew

2008-01-01

A friction stir weld (FSW) repair method has been developed and successfully implemented on Al 2195 plate material for the Space Shuttle External Fuel Tank (ET). The method includes restarting the friction stir weld in the termination hole of the original weld followed by two reweld passes. Room temperature and cryogenic temperature mechanical properties exceeded minimum FSW design strength and compared well with the development data. Simulated service test results also compared closely to historical data for initial FSW, confirming no change to the critical flaw size or inspection requirements for the repaired weld. Testing of VPPA fusion/FSW intersection weld specimens exhibited acceptable strength and exceeded the minimum design value. Porosity, when present at the intersection was on the root side toe of the fusion weld, the "worst case" being 0.7 inch long. While such porosity may be removed by sanding, this "worst case" porosity condition was tested "as is" and demonstrated that porosity did not negatively affect the strength of the intersection weld. Large, 15-inch "wide panels" FSW repair welds were tested to demonstrate strength and evaluate residual stresses using photo stress analysis. All results exceeded design minimums, and photo stress analysis showed no significant stress gradients due to the presence of the restart and multi-pass FSW repair weld.

9. ENGINE TEST CELL BUILDING INTERIOR. CELL ACCESS ELEVATOR, CELLS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. ENGINE TEST CELL BUILDING INTERIOR. CELL ACCESS ELEVATOR, CELLS 2 AND 4, BASEMENT LEVEL. LOOKING SOUTHEAST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

Development and Testing of an Engineering Prototype for a Marine Version of the Berkeley Unexploded Ordnance Discriminator (BUD)

DTIC Science & Technology

2013-06-01

on the laminated waterproof platform as shown in Figures 29 and 30. 35 Figure 29 Figure 30 36 The receiver coils, and transmitter...mounted on a flatbed trailer, transported to the Richmond Marina, and launched from the boat launch ramp, Figure 32. 37 Figure 32 Once in

The significance of mouse liver tumor formation for carcinogenic risk assessment: results and conclusions from a survey of ten years of testing by the agrochemical industry.

PubMed Central

Carmichael, N G; Enzmann, H; Pate, I; Waechter, F

1997-01-01

A survey was performed on the results of 138 carcinogenicity studies conducted in various mouse strains by the agrochemical industry over the period 1983-1993. Data for liver tumor incidence, liver weight, and histopathology were collected along with data on genotoxicity. Studies were judged positive or negative for liver tumor formation on the basis of apparent dose response, malignancy, and difference from historical control values using a weight of evidence approach. Thirty-seven studies were judged to be positive for liver tumorigenicity in one or both sexes. There was no evidence showing an influence of the mouse strain and the duration of the study on the proportion of positive studies. Although 8 of the chemicals tested in the 138 studies were positive in the Ames test, only one of these was judged positive for carcinogenicity. Only 6 of the 37 positive chemicals had any other reported positive genotoxicity findings. A clear relationship between hepatomegaly at 1 year after exposure and a positive tumorigenic outcome at 18 months or 2 years after exposure was demonstrated. Whereas the average relative liver weight of top dose animals was 110% of control in negative studies, it was 150% in positive studies. Likewise, very few negative studies demonstrated significant pathological findings after 1 year, whereas the majority of positive studies had significant liver pathology. The implications of these findings for extrapolation to humans are discussed. Images p1196-a Figure 1. A Figure 1. B Figure 1. C Figure 1. D Figure 2. A Figure 2. B Figure 2. C Figure 2. D Figure 3. Figure 3. Figure 4. Figure 4. PMID:9370513

The reliability and clinical correlates of figure-ground perception in schizophrenia.

PubMed

Malaspina, Dolores; Simon, Naomi; Goetz, Raymond R; Corcoran, Cheryl; Coleman, Eliza; Printz, David; Mujica-Parodi, Lilianne; Wolitzky, Rachel

2004-01-01

Schizophrenia subjects are impaired in a number of visual attention paradigms. However, their performance on tests of figure-ground visual perception (FGP), which requires subjects to visually discriminate figures embedded in a rival background, is relatively unstudied. We examined FGP in 63 schizophrenia patients and 27 control subjects and found that the patients performed the FGP test reliably and had significantly lower FGP scores than the control subjects. Figure-ground visual perception was significantly correlated with other neuropsychological test scores and was inversely related to negative symptoms. It was unrelated to antipsychotic medication treatment. Figure-ground visual perception depends on "top down" processing of visual stimuli, and thus this data suggests that dysfunction in the higher-level pathways that modulate visual perceptual processes may also be related to a core defect in schizophrenia.

Evaluation of Minimum Asphalt Concrete Thickness Criteria

DTIC Science & Technology

2008-10-01

9 Figure 6. Dry density versus moisture content for CH material... density measurements. ............................ 24 Figure 18. EPC installation in a crushed gravel base course layer...Construction Materials Materials Characterization Laboratory Testing Field Testing Test Section Construction Hydrometer, Modified Proctor , Specific

Predicting Software Assurance Using Quality and Reliability Measures

DTIC Science & Technology

2014-12-01

errors are not found in unit testing . The rework effort to correct requirement and design problems in later phases can be as high as 300 to 1,000...Literature 31 Appendix B: Quality Cannot Be Tested In 35 Bibliography 38 CMU/SEI-2014-TN-026 | ii CMU/SEI-2014-TN-026 | iii List of Figures...Removal Densities During Development 10 Figure 8: Quality and Security-Focused Workflow 14 Figure 9: Testing Reliability Results for the Largest Project

16 CFR Figure 3 to Part 1513 - Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of “A” Section of Probe and...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of âAâ Section of Probe and Boundaries of Opening 3 Figure 3 to Part 1513... REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 3 Figure 3 to Part 1513—Motion of Test Probe Arrested by Simultaneous...

16 CFR Figure 3 to Part 1513 - Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of “A” Section of Probe and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of âAâ Section of Probe and Boundaries of Opening 3 Figure 3 to Part 1513... REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 3 Figure 3 to Part 1513—Motion of Test Probe Arrested by Simultaneous...

16 CFR Figure 3 to Part 1513 - Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of “A” Section of Probe and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of âAâ Section of Probe and Boundaries of Opening 3 Figure 3 to Part 1513... REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 3 Figure 3 to Part 1513—Motion of Test Probe Arrested by Simultaneous...

16 CFR Figure 3 to Part 1513 - Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of “A” Section of Probe and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of âAâ Section of Probe and Boundaries of Opening 3 Figure 3 to Part 1513... REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 3 Figure 3 to Part 1513—Motion of Test Probe Arrested by Simultaneous...

16 CFR Figure 3 to Part 1513 - Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of “A” Section of Probe and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Motion of Test Probe Arrested by Simultaneous Contact With Both Sides of âAâ Section of Probe and Boundaries of Opening 3 Figure 3 to Part 1513... REQUIREMENTS FOR BUNK BEDS Pt. 1513, Fig. 3 Figure 3 to Part 1513—Motion of Test Probe Arrested by Simultaneous...

Grounding the figure.

PubMed

Calis, G; Leeuwenberg, E

1981-12-01

Coding rules can be formulated in which the shortest description of a figure-ground pattern exhibits a hierarchical structure, with the ground playing a primary and the figure a secondary role. We hypothesized that the process of perception involves and assimilation phase followed by a test phase in which the ground is tested before the figure. Experiments are described in which pairs of consecutive, superimposed patterns are presented in rapid succession, resulting in a subjective impression of seeing one pattern only. In these presentations, the second pattern introduces some deliberate distortion of the figure or ground displayed in the first pattern. Maximal distortions of the ground occur at shorter stimulus onset asynchronies than maximal distortions of the figure, suggesting that the ground codes are processed before figure codes. Moreover, patterns presenting the ground first are more likely to be perceived as ground, regardless of the distortions, than patterns presenting the figure first. This quasi masking or microgenetic approach might be relevant to theories on :mediations of immediate, or direct" perception.

Fast intersection detection algorithm for PC-based robot off-line programming

NASA Astrophysics Data System (ADS)

Fedrowitz, Christian H.

1994-11-01

This paper presents a method for fast and reliable collision detection in complex production cells. The algorithm is part of the PC-based robot off-line programming system of the University of Siegen (Ropsus). The method is based on a solid model which is managed by a simplified constructive solid geometry model (CSG-model). The collision detection problem is divided in two steps. In the first step the complexity of the problem is reduced in linear time. In the second step the remaining solids are tested for intersection. For this the Simplex algorithm, which is known from linear optimization, is used. It computes a point which is common to two convex polyhedra. The polyhedra intersect, if such a point exists. Regarding the simplified geometrical model of Ropsus the algorithm runs also in linear time. In conjunction with the first step a resultant collision detection algorithm is found which requires linear time in all. Moreover it computes the resultant intersection polyhedron using the dual transformation.

Traffic light detection and intersection crossing using mobile computer vision

NASA Astrophysics Data System (ADS)

Grewei, Lynne; Lagali, Christopher

2017-05-01

The solution for Intersection Detection and Crossing to support the development of blindBike an assisted biking system for the visually impaired is discussed. Traffic light detection and intersection crossing are key needs in the task of biking. These problems are tackled through the use of mobile computer vision, in the form of a mobile application on an Android phone. This research builds on previous Traffic Light detection algorithms with a focus on efficiency and compatibility on a resource-limited platform. Light detection is achieved through blob detection algorithms utilizing training data to detect patterns of Red, Green and Yellow in complex real world scenarios where multiple lights may be present. Also, issues of obscurity and scale are addressed. Safe Intersection crossing in blindBike is also discussed. This module takes a conservative "assistive" technology approach. To achieve this blindBike use's not only the Android device but, an external bike cadence Bluetooth/Ant enabled sensor. Real world testing results are given and future work is discussed.

The Predictive Validity of the Torrance Figural Test (Form B) of Creative Thinking in the College of Fine and Applied Arts.

ERIC Educational Resources Information Center

Stallings, William M.

In an effort to improve the predictability of course grades in the College of Fine and Applied Arts the Torrance Figural Test (Form B) of Creative Thinking was administered to entering 1968 freshmen. Four figural creativity variables (Fluency, Flexibility, Originality, and Elaboration) were correlated with course grades, American College Testing…

Erratum: Simple Seismic Tests of the Solar Core

NASA Astrophysics Data System (ADS)

Kennedy, Dallas C.

2000-12-01

In the article ``Simple Seismic Tests of the Solar Core'' by Dallas C. Kennedy (ApJ, 540, 1109 [2000]), Figures 1, 2, and 3 in the print edition of the Journal were unreadable because of problems with the electronic file format. The figures in the electronic edition were unaffected. The figures should have appeared as below. The Press sincerely regrets this error.

Review of Recent Literature on Figure Drawing Tests as Related to Research Problems in Art Education

ERIC Educational Resources Information Center

McWhinnie, Harold J.

1971-01-01

McFee's perception-delineation theory is supported. Major methodological problems of the psychological research presented are in the area of set and the control of specific art materials. Among the conclusions: figure drawing may not be culture fair; a person trained in visual arts should be employed in research using figure drawing tests. (VW)

Pseudo-Duane's retraction syndrome.

PubMed Central

Duane, T D; Schatz, N J; Caputo, A R

1976-01-01

Five patients presented with signs that were similar to but opposite from Duane's retraction syndrome. Most had a history of orbital trauma. On attempted abduction a narrowing of the palpebral fissure and retraction of the globe was observed. Diplopia with lateral gaze was present. Roentgenograms (polytomograms) showed involvement of the medial orbital wall. Forced ductuin tests were positive. Surgical repair of the fracture and release of the entrapped muscle as determined by forced duction tests and by postoperative motility led to successful results. Images FIGURE 1 A FIGURE 1 B FIGURE 2 FIGURE 3 PMID:867622

AGARD Flight Test Series. Volume 10. Weapon Delivery Analysis and Ballistic Flight Testing (L’Analyse du Largage d’Armes et les en Vol Balistique).

DTIC Science & Technology

1992-07-01

Figure 24 Type 29 Telereader System 38 Figure 25 Contraves Semi-Automatic Film Reader 38 Figure 26 Typical Impact Plot 41 Figure 27 Delta Range...But they were at a loss as to how to account for the very observable and unpre- dictable pitching and yawing motions of bombs as they separated...nique. Just as had occurred during World War I, aircrews were forced to high altitudes to minimize aircraft losses from enemy defensive fire. And

Dynamic Camouflage in Benthic and Pelagic Cephalopods: An Interdisciplinary Approach to Crypsis Based on Color, Reflection, and Bioluminescence

DTIC Science & Technology

2011-09-30

the holodeck to test predation responses (left) and the optomotor response (right) We also studied the basic principles octopuses use to camouflage...the specific background the animal was on (Figure 6). Figure 4: An octopus settled in the test arena. Figure 5: Left) test arena; center) result of...separate photonic structures in nine evolutionarily diverse species of open-ocean squid and an octopus . RESULTS Objective 1, Light measurements: The most

Final Report of the Rifling Profile Push Test

DTIC Science & Technology

2007-06-01

barrel lands through the copper alloy jacket, as shown in figure 6. As a result, compression of the jacket material above the steel core will occur...resistance pressure of the M855 projectile in an M16A2 barrel section. The M855 test projectiles were tested in a 2 × 2 matrix, two different M16A2 barrel ...1 Figure 2. M16A2 barrel machined section. The units of measure are in cm.................................2 Figure 3

Evaluation of Precast Portland Cement Concrete Panels for Airfield Pavement Repairs

DTIC Science & Technology

2015-05-01

3 1.3 Research approach ...Figure 1.1. Research approach schematic. ................................................................................................ 4 Figure 2.1...220 Figure D.10. Locations of HWD tests pre-repair and posttest

40 CFR 89.509 - Calculation and reporting of test results.

Code of Federal Regulations, 2014 CFR

2014-07-01

... applicable emission standard expressed to one additional significant figure. This procedure has been... additional significant figure. (c) Within five working days after completion of testing of all engines...

HIFiRE-1 and HIFiRE-5 Test Results

DTIC Science & Technology

2014-02-01

From AFRL and NASA BETs ....................................................................................................... 12 Figure 10 Roll ...34 Figure 31 Roll Angle and PLBW3 Pressure Trace Versus Flight Time During Reentry ........................... 34 Figure...vehicle orientation in flight is described by the velocity-referenced coordinate system shown in Figure 10. Roll angle, Φ, is defined as the angle

10kW TWT Transition to GaN IRE

DTIC Science & Technology

2015-03-31

tubes in high power radar and Electronic Warfare (EW) applications. GaN transistors, using evaluation boards, were tested and analyzed, supplementing...29 Appendix B. High Power Amplifier Testing Data...19 Figure 11. High Power RF Amplifier Test Set ............................................................................. 22 Figure 12

Experimental Evaluations of Selected Immersion Hypothermia Protection Equipment.

DTIC Science & Technology

1979-10-12

Temperature Response ............... 30 Figure 1-3 Estimated Survival Times for Average Men ..... 49 Figure 1-4 Metabolic Rate Response :Subject BS...51 Figure 1-5 Metabolic Rate Response : Subject GE ............... 52 Figure 1-6 Selected Elementary Movements ............... 58 Figure 1-7 Fatigue... responses to cold-Immersion, while wearing the test articles, could be observed or-vs over a narrow range of body core temperatures Involving the mildest

[Description and evaluation of creative thinking in preterm low birth weight infants].

PubMed

Parisi, L; Di Filippo, T; Firrigno, L; La Grutta, S; Testa, D; Roccella, M

2007-04-01

Since the 1950s, the problem of how to evaluate creativity has been addressed in studies on the definition of measurement criteria and on the relationship between intelligence and creative thinking. Many revealed cognitive and relational disorders in preterm infants, particularly in preterm very low birth weight infants (birth weight <1500 g) and in infants with serious complications. This study describes the development of creative thinking in a group of children born preterm. The study sample was 43 children (21 males, 22 females; age range 6-11 years), regularly attending school, born with low birth weight (1050-2450 g) at 29-32 weeks gestational age, and compared with a control group with birth weight >2500 g. The test battery included: Torrance Test of Creative Thinking (TCTT); WISC-R intelligence test; Goodenough Human Figure Drawing Test. Statistical analysis (Mann-Whitney U test) showed a statistically significant difference (P>0.05) between the 2 groups; scores for figure originality, figure fluidity and figure elaboration were consistently higher in the control group. Within the low birth weight group, there was a significant correlation (Spearman r) between verbal IQ and verbal fluidity and verbal flexibility subscale scores and between IQ performance and figure elaboration. Scores on the figure drawing tests showed higher creative ability in the control group. In children born preterm with low birth weight, emotive dynamics and flow of affection may influence the channels of communication between child and family. The low figure originality subscale scores support the hypothesis that psychodynamic and relational factors (worry about the preterm condition, overprotective behaviour by parents and others) could lead to diminished autonomy, flexibility and manipulatory interest in the child.

16 CFR Figure 10 to Subpart A of... - Insulation Radiant Panel Test Data Log Format

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Insulation Radiant Panel Test Data Log Format 10 Figure 10 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION The Standard Pt. 1209, Subpt. A, Fig. 10 Figure 10 to Subpart A...

16 CFR Figure 10 to Subpart A of... - Insulation Radiant Panel Test Data Log Format

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Insulation Radiant Panel Test Data Log Format 10 Figure 10 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION The Standard Pt. 1209, Subpt. A, Fig. 10 Figure 10 to Subpart A...

16 CFR Figure 10 to Subpart A of... - Insulation Radiant Panel Test Data Log Format

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Insulation Radiant Panel Test Data Log Format 10 Figure 10 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION The Standard Pt. 1209, Subpt. A, Fig. 10 Figure 10 to Subpart A...

16 CFR Figure 10 to Subpart A of... - Insulation Radiant Panel Test Data Log Format

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Insulation Radiant Panel Test Data Log Format 10 Figure 10 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION The Standard Pt. 1209, Subpt. A, Fig. 10 Figure 10 to Subpart A...

16 CFR Figure 10 to Subpart A of... - Insulation Radiant Panel Test Data Log Format

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Insulation Radiant Panel Test Data Log Format 10 Figure 10 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION The Standard Pt. 1209, Subpt. A, Fig. 10 Figure 10 to Subpart A...

Test Bias in the Intermediate Mental Alertness, Mechanical Comprehension, Blox and High Level Figure Classification Tests. An NTB/HSRC Report.

ERIC Educational Resources Information Center

Holburn, P. T.

Research is reported on four tests commonly used in South Africa to select apprentices, the Intermediate Mental Alertness Test, the High Level Figure Classification Test, the Blox Test, and the Mechanical Comprehension Test. Samples were as follows: (1) 206 Asian, 208 Black, 102 Coloured, and 99 White mostly male applicants for sugar industry…

Quantifying the yellow signal driver behavior based on naturalistic data from digital enforcement cameras.

PubMed

Bar-Gera, H; Musicant, O; Schechtman, E; Ze'evi, T

2016-11-01

The yellow signal driver behavior, reflecting the dilemma zone behavior, is analyzed using naturalistic data from digital enforcement cameras. The key variable in the analysis is the entrance time after the yellow onset, and its distribution. This distribution can assist in determining two critical outcomes: the safety outcome related to red-light-running angle accidents, and the efficiency outcome. The connection to other approaches for evaluating the yellow signal driver behavior is also discussed. The dataset was obtained from 37 digital enforcement cameras at non-urban signalized intersections in Israel, over a period of nearly two years. The data contain more than 200 million vehicle entrances, of which 2.3% (∼5million vehicles) entered the intersection during the yellow phase. In all non-urban signalized intersections in Israel the green phase ends with 3s of flashing green, followed by 3s of yellow. In most non-urban signalized roads in Israel the posted speed limit is 90km/h. Our analysis focuses on crossings during the yellow phase and the first 1.5s of the red phase. The analysis method consists of two stages. In the first stage we tested whether the frequency of crossings is constant at the beginning of the yellow phase. We found that the pattern was stable (i.e., the frequencies were constant) at 18 intersections, nearly stable at 13 intersections and unstable at 6 intersections. In addition to the 6 intersections with unstable patterns, two other outlying intersections were excluded from subsequent analysis. Logistic regression models were fitted for each of the remaining 29 intersection. We examined both standard (exponential) logistic regression and four parameters logistic regression. The results show a clear advantage for the former. The estimated parameters show that the time when the frequency of crossing reduces to half ranges from1.7 to 2.3s after yellow onset. The duration of the reduction of the relative frequency from 0.9 to 0.1 ranged from 1.9 to 2.9s. Copyright © 2015 Elsevier Ltd. All rights reserved.

Coupling epistemology and identity in explaining student interest in science

NASA Astrophysics Data System (ADS)

Richards, Jennifer; Conlin, Luke; Gupta, Ayush; Elby, Andrew

2013-01-01

In this paper, we present the case of Estevan, an eighth-grader from Honduras whose interest in science lies primarily at the intersection of personal epistemology and identity. Drawing on video data from classroom interactions as well as interviews with Estevan and his teacher, Ms. K, we show how Estevan's passionate engagement in sensemaking about the seasons arose from an alignment between his epistemological stance that science involves figuring things out for yourself and his enacted identity as someone who faces challenges head-on. We use Estevan's case to highlight the importance of remaining open to the multiplicity of connections that might exist between interest in science and students' identities and to motivate looking deeper into such issues before prescribing how to engage students in science.

Chladni solitons and the onset of the snaking instability for dark solitons in confined superfluids.

PubMed

Muñoz Mateo, A; Brand, J

2014-12-19

Complex solitary waves composed of intersecting vortex lines are predicted in a channeled superfluid. Their shapes in a cylindrical trap include a cross, spoke wheels, and Greek Φ, and trace the nodal lines of unstable vibration modes of a planar dark soliton in analogy to Chladni's figures of membrane vibrations. The stationary solitary waves extend a family of solutions that include the previously known solitonic vortex and vortex rings. Their bifurcation points from the dark soliton indicating the onset of new unstable modes of the snaking instability are predicted from scale separation for Bose-Einstein condensates (BECs) and superfluid Fermi gases across the BEC-BCS crossover, and confirmed by full numerical calculations. Chladni solitons could be observed in ultracold gas experiments by seeded decay of dark solitons.

Chladni Solitons and the Onset of the Snaking Instability for Dark Solitons in Confined Superfluids

NASA Astrophysics Data System (ADS)

Muñoz Mateo, A.; Brand, J.

2014-12-01

Complex solitary waves composed of intersecting vortex lines are predicted in a channeled superfluid. Their shapes in a cylindrical trap include a cross, spoke wheels, and Greek Φ , and trace the nodal lines of unstable vibration modes of a planar dark soliton in analogy to Chladni's figures of membrane vibrations. The stationary solitary waves extend a family of solutions that include the previously known solitonic vortex and vortex rings. Their bifurcation points from the dark soliton indicating the onset of new unstable modes of the snaking instability are predicted from scale separation for Bose-Einstein condensates (BECs) and superfluid Fermi gases across the BEC-BCS crossover, and confirmed by full numerical calculations. Chladni solitons could be observed in ultracold gas experiments by seeded decay of dark solitons.

A multi-factor Rasch scale for artistic judgment.

PubMed

Bezruczko, Nikolaus

2002-01-01

Measurement properties are reported for a combined scale of abstract and figurative artistic judgment aptitude items. Abstract items are synthetic, rule-based images from Visual Designs Test which implements a statistical algorithm to control design complexity and redundancy, and figurative items are canvas paintings in five styles, Fauvism, Post-Impressionism, Surrealism, Renaissance, and Baroque especially created for this research. The paintings integrate syntactic structure from VDT Abstract designs with thematic content for each style at four levels of complexity while controlling redundancy. Trained test administrators collected preference for synthetic abstract designs and authentic figurative art from 462 examinees in Johnson O'Connor Research Foundation testing offices in Boston, New York, Chicago, and Dallas. The Rasch model replicated measurement properties for VDT Abstract items and identified an item hierarchy that was statistically invariant between genders and generally stable across age for new, authentic figurative items. Further examination of the figurative item hierarchy revealed that complexity interacts with style and meaning. Sound measurement properties for a combined VDT Abstract and Figurative scale shows promise for a comprehensive artistic judgment construct.

Design, Test, and Evaluation of a Transonic Axial Compressor Rotor with Splitter Blades

DTIC Science & Technology

2013-09-01

parameters .......................................................17 Figure 13. Third-order spline fit for blade camber line distribution...18 Figure 14. Third-order spline fit for blade thickness distribution .....................................19 Figure 15. Blade...leading edge: third-order spline fit for thickness distribution ...............20 Figure 16. Blade leading edge and trailing edge slope blending

Behavior and influence of desiccation cracking in loess landfill covers

NASA Astrophysics Data System (ADS)

Wu, Tao; Lan, Ji-wu; Qiu, Qing-wen; He, Hai-jie; Li, He

2017-11-01

In the northwest region of China, loess was the main closure cover material of local landfills. Tests in a full-scale testing facility were conducted to investigate the behavior and influence of desiccation cracking in loess landfill covers. The desiccation cracks in the loess landfill cover intersected with T-shape, and the intersection angles were close to 90 degrees. The desiccation cracks formed as a result of drying, and would heal with the increase of moisture content of the loess. In addition, desiccation cracking in loess covers would promote the formation of preferential flow channels. As a consequence, the gas permeability of the loess cover was improved, and methane emissions increased obviously.

7. VIEW OF BOOSTER STATION 3, FACING NORTHWEST Nevada ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW OF BOOSTER STATION 3, FACING NORTHWEST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

2. VIEW OF BOOSTER STATION 1, FACING NORTHEAST Nevada ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW OF BOOSTER STATION 1, FACING NORTHEAST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

11. VIEW OF BOOSTER STATION 4, FACING SOUTHEAST Nevada ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. VIEW OF BOOSTER STATION 4, FACING SOUTHEAST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

10. VIEW OF BOOSTER STATION 4, FACING NORTHWEST Nevada ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. VIEW OF BOOSTER STATION 4, FACING NORTHWEST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

1. VIEW OF BOOSTER STATION 1, FACING SOUTHWEST Nevada ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW OF BOOSTER STATION 1, FACING SOUTHWEST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

8. VIEW OF BOOSTER STATION 3, FACING SOUTHEAST Nevada ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW OF BOOSTER STATION 3, FACING SOUTHEAST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

4. VIEW OF BOOSTER STATION 2, FACING NORTHWEST Nevada ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW OF BOOSTER STATION 2, FACING NORTHWEST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

5. VIEW OF BOOSTER STATION 2, FACING SOUTHEAST Nevada ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW OF BOOSTER STATION 2, FACING SOUTHEAST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

49 CFR 581.7 - Test procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... procedure. (2) For impacts at a height of 20 inches, place the test device shown in Figure 1 so that Plane A... between 20 inches and 16 inches, place the test device shown in Figure 2 so that Plane A is vertical and... perpendicular to the plane that includes Plane A of the test device and with the test device inboard of the...

7. VIEW LOOKING WEST DOWN CENTRAL AVENUE AT THE INTERSECTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW LOOKING WEST DOWN CENTRAL AVENUE AT THE INTERSECTION WITH SEVENTH STREET. THE PLANT WAS BUILT ON THE SITE WITH FOUR SEPARATE PRODUCTION AREAS, AND AN ADMINISTRATION AND SUPPORT AREA. THIS PHOTOGRAPH SHOWS THE EASTERN EDGE OF THE CORE ADMINSTRATION AND SUPPORT AREA, BUILT IN THE EARLY 1950S. IN THE LEFT FOREGROUND OF THE PHOTOGRAPH IS BUILDING 442, USED TO TEST ALL HEPA FILTERS ON SITE. - Rocky Flats Plant, Bounded by Indiana Street & Routes 93, 128 & 72, Golden, Jefferson County, CO

High Temperature Tribometer. Phase 1

DTIC Science & Technology

1989-06-01

13 Figure 2.3.2 Setpoint and Gain Windows in FW.EXE ......... . Figure 2.4.1 Data-Flow Diagram for Data-Acquisition Module ..... .. 23 I Figure...mounted in a friction force measuring device. Optimally , material testing results should not be test machine sensitiye; but due to equipment variables...fixed. The friction force due to sliding should be continuously measured. This is optimally done in conjunction with the normal force measurement via

Correcting Surface Figure Error in Imaging Satellites Using a Deformable Mirror

DTIC Science & Technology

2013-12-01

background understanding about the Naval Postgraduate School’s SMT test- bed and the required performance for mirror surface figures. The...Postgraduate School. Larger than the Hubble Space Telescope, but smaller than the JWST (see Figure 2), the SMT is an advanced test- bed to research the...orientation (from [3]). The six segments of the primary mirror have a lightweight, deformable, nano- laminate face with actuators across the rear

The SLS Stages Intertank Structural Test Assembly (STA) arrives at MSFC

NASA Image and Video Library

2018-03-08

The SLS Stages Intertank Structural Test Assembly (STA) is rolling off the NASA Pegasus Barge at the MSFC Dock enroute to the MSFC 4619 Load Test Annex test facility for qualification testing via MSFC West Test Area. STA enters West Test Area from intersection of Dodd and Saturn roads. Onlookers take photos with Historic Dynamic Test Stand in background.

Mammary gland neoplasia in long-term rodent studies.

PubMed Central

Russo, I H; Russo, J

1996-01-01

Breast cancer, the most frequent spontaneous malignancy diagnosed in women in the western world, is continuously increasing in incidence in industrialized nations. Although breast cancer develops in women as the result of a combination of external and endogenous factors such as exposure to ionizing radiation, diet, socioeconomic status, and endocrinologic, familial, or genetic factors, no specific etiologic agent(s) or the mechanisms responsible of the disease has been identified as yet. Thus, experimental models that exhibit the same complex interactions are needed for testing various mechanisms and for assessing the carcinogenic potential of given chemicals. Rodent mammary carcinomas represent such a model to a great extent because, in these species, mammary cancer is a multistep complex process that can be induced by either chemicals, radiation, viruses, or genetic factors. Long-term studies in rodent models have been particularly useful for dissecting the initiation, promotion, and progression steps of carcinogenesis. The susceptibility of the rodent mammary gland to develop neoplasms has made this organ a unique target for testing the carcinogenic potential of specific genotoxic chemicals and environmental agents. Mammary tumors induced by indirect- or direct-acting carcinogens such as 7, 12-dimethlbenz(a)anthracene or N-methyl-N-nitrosourea are, in general, hormone dependent adenocarcinomas whose incidence, number of tumors per animal, tumor latency, and tumor type are influenced by the age, reproductive history, and endocarinologic milieu of the host at the time of carcinogen exposure. Rodent models are informative in the absence of human data. They have provided valuable information on the dose and route of administration to be used and optimal host conditions for eliciting maximal tumorigenic response. Studies of the influence of normal gland development on the pathogenesis of chemically induced mammary carcinomas have clarified the role of differentiation in cancer initiation. Comparative studies with the development of the human breast and the pathogenesis of breast cancer have contributed to validate rodent-to-human extrapolations. However, it has not been definitively established what type of information is necessary for human risk assessment, whether currently toxicity testing methodologies are sufficient for fulfilling those needs, or whether treatment-induced tumorigenic responses in rodents are predictive of potential human risk. An alternative to the traditional bioassays are mechanism-based toxicology and molecular and cellular approaches, combined with comparative in vitro systems. These approaches might allow the rapid screen of chemicals for setting priorities for further studies to determine the dose-response relationship for chemical effects at low doses, to assess effects other than mutagenesis and/or tumorigenesis, or to establish qualitative and quantitative relationships of biomarkers to toxic effects. Until there is enough information on the predictive value of mechanism-based toxicology for risk assessment, this approach should be used in conjunction with and validated by the traditional in vivo long-term bioassays. Images Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. A Figure 7. B Figure 8. A Figure 8. B Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. PMID:8899375

Advanced Coats' disease.

PubMed Central

Haik, B G

1991-01-01

Advanced Coats' disease and retinoblastoma can both present with the triad of a retinal detachment, the appearance of a subretinal mass, and dilated retinal vessels. Thus, even the most experienced observer may not be able to differentiate these entities on ophthalmoscopic findings alone. Coats' disease is the most common reason for which eyes are enucleated with the misdiagnosis of retinoblastoma. Ultrasonography is the auxiliary diagnostic test most easily incorporated into the clinical examination, and can be utilized repeatedly without biologic tissue hazard. Ultrasonically identifiable features allowing differentiation between Coats' disease and retinoblastoma include the topography and character of retinal detachment and presence or absence of subretinal calcifications. Ultrasonography is of lesser use in poorly calcified retinoblastoma and in detecting optic nerve or extraocular extension in heavily calcified retinoblastoma. CT is perhaps the single most valuable test because of its ability to: (a) delineate intraocular morphology, (b) quantify subretinal densities, (c) identify vascularities within the subretinal space through the use of contrast enhancement, and (d) detected associated orbital or intracranial abnormalities. Optimal computed tomographic studies, however, require multiple thin slices both before and after contrast introduction and expose the child to low levels of radiation if studies are repeated periodically. MR imaging is valuable for its multiplanar imaging capabilities, its superior contrast resolution, and its ability to provide insights into the biochemical structure and composition of tissues. It is limited in its ability to detect calcium, which is the mainstay of ultrasonic and CT differentiation. Aqueous LDH and isoenzyme levels were not valuable in distinguishing between Coats' disease and retinoblastoma. The value of aqueous NSE levels in the differentiation of advanced Coats' disease and exophytic retinoblastoma deserves further study. Specimens from patients with intraocular hemorrhage should be viewed cautiously, since erythrocytes contain high levels of enolase. Analysis of subretinal aspirates is an extremely accurate method of confirming the diagnosis of Coats' disease. The key diagnostic findings are the presence of cholesterol crystals and pigment-laden macrophages and the absence of tumor cells on fresh preparations. The technique should be reserved for patients where retinoblastoma has been ruled out by all noninvasive means and massive subretinal drainage is anticipated. The natural progression in advanced Coats' disease is toward the development of a blind, painful eye. Spontaneous regression does rarely occur, and some eyes quietly progress to a phthisical state.(ABSTRACT TRUNCATED AT 400 WORDS) Images FIGURE 2 FIGURE 3 FIGURE 4 A FIGURE 4 B FIGURE 5 FIGURE 6 FIGURE 7 FIGURE 8 FIGURE 9 FIGURE 10 FIGURE 11 FIGURE 13 FIGURE 14 FIGURE 15 FIGURE 16 FIGURE 17 FIGURE 18 FIGURE 19 FIGURE 20 FIGURE 21 FIGURE 22 FIGURE 23 FIGURE 24 FIGURE 25 FIGURE 26 FIGURE 27 FIGURE 28 FIGURE 29 FIGURE 30 FIGURE 31 FIGURE 32 FIGURE 33 FIGURE 34 A FIGURE 34 B FIGURE 35 FIGURE 36 FIGURE 38 FIGURE 39 FIGURE 41 FIGURE 42 FIGURE 43 FIGURE 44 FIGURE 45 FIGURE 46 A FIGURE 46 B FIGURE 47 A FIGURE 47 B FIGURE 48 A FIGURE 48 B FIGURE 49 FIGURE 50 FIGURE 51 FIGURE 52 FIGURE 54 FIGURE 54 (cont.) FIGURE 55 FIGURE 57 FIGURE 58 FIGURE 59 FIGURE 60 FIGURE 61 FIGURE 62 FIGURE 63 FIGURE 64 FIGURE 65 FIGURE 66 A FIGURE 66 B FIGURE 67 A FIGURE 67 B PMID:1808814

An Investigation of the Visual and Tactile Spatial Reasoning Abilities of the Hearing Impaired/Deaf Student.

ERIC Educational Resources Information Center

Hauptman, Anna R.

Two experiments involving 42 students from the Model Secondary School for the Deaf investigated both the visual and tactile components in the processing of spatial information. Test measures used were the Figures Rotations Test, Group Embedded Figures Test, and Tactile Rotations Test. The study suggested that spatial reasoning is a determining…

16 CFR Figure 2 to Subpart A of... - Test Frame

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test Frame 2 Figure 2 to Subpart A of Part 1201 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS... Subpart A of Part 1201—Test Frame EC03OC91.005 ...

16 CFR Figure 2 to Subpart A of... - Test Frame

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test Frame 2 Figure 2 to Subpart A of Part 1201 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS... Subpart A of Part 1201—Test Frame EC03OC91.005 ...

49 CFR Appendix - Figures to Subpart S of Part 572

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Figures to Subpart S of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III Six-Year-Old Weighted Child Test Dummy Test conditions and...

49 CFR Appendix - Figures to Subpart P of Part 572

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Figures to Subpart P of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 3-year-Old Child Crash Test Dummy, Alpha Version Test conditions and...

49 CFR Appendix - Figures to Subpart N of Part 572

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Figures to Subpart N of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Six-year-old Child Test Dummy, Beta Version Test conditions and...

49 CFR Appendix - Figures to Subpart N of Part 572

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Figures to Subpart N of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Six-year-old Child Test Dummy, Beta Version Test conditions and...

49 CFR Appendix - Figures to Subpart O of Part 572

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Figures to Subpart O of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III 5th Percentile Female Test Dummy, Alpha Version Test conditions...

49 CFR Appendix - Figures to Subpart P of Part 572

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Figures to Subpart P of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 3-year-Old Child Crash Test Dummy, Alpha Version Test conditions and...

49 CFR Appendix - Figures to Subpart N of Part 572

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Figures to Subpart N of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Six-year-old Child Test Dummy, Beta Version Test conditions and...

49 CFR Appendix - Figures to Subpart O of Part 572

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Figures to Subpart O of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III 5th Percentile Female Test Dummy, Alpha Version Test conditions...

49 CFR Appendix - Figures to Subpart O of Part 572

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Figures to Subpart O of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III 5th Percentile Female Test Dummy, Alpha Version Test conditions...

49 CFR Appendix - Figures to Subpart S of Part 572

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Figures to Subpart S of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III Six-Year-Old Weighted Child Test Dummy Test conditions and...

49 CFR Appendix - Figures to Subpart P of Part 572

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Figures to Subpart P of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 3-year-Old Child Crash Test Dummy, Alpha Version Test conditions and...

49 CFR Appendix - Figures to Subpart S of Part 572

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Figures to Subpart S of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III Six-Year-Old Weighted Child Test Dummy Test conditions and...

16 CFR Figure 8 to Part 1203 - Apparatus for Test of Retention System Strength

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Apparatus for Test of Retention System Strength 8 Figure 8 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT...—Apparatus for Test of Retention System Strength ER10MR98.008 ...

16 CFR Figure 8 to Part 1203 - Apparatus for Test of Retention System Strength

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Apparatus for Test of Retention System Strength 8 Figure 8 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT...—Apparatus for Test of Retention System Strength ER10MR98.008 ...

16 CFR Figure 1 to Part 1512 - Bicycle Front Fork Cantilever Bending Test Rig

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Bicycle Front Fork Cantilever Bending Test Rig 1 Figure 1 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS... Fork Cantilever Bending Test Rig EC03OC91.070 ...

16 CFR Figure 1 to Part 1512 - Bicycle Front Fork Cantilever Bending Test Rig

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Bicycle Front Fork Cantilever Bending Test Rig 1 Figure 1 to Part 1512 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS... Fork Cantilever Bending Test Rig EC03OC91.070 ...

Demonstration of Remotely Operated Vehicles to Aid Underwater Inspection of Corps of Engineers Navigation Structures. Winfield Locks and Dam 13-17 August 2007

DTIC Science & Technology

2008-09-01

2 Deep Ocean Engineering Triggerfish ...Figures Figure 1. Deep Ocean Engineering Triggerfish ROV carried by two divers (top)................................... 4 Figure 2. SeaBotix...the physical parameters and approximate costs of the systems as tested. Deep Ocean Engineering Triggerfish Figure 1 shows the Deep Ocean

Brick Paving Systems in Expeditionary Environments: Field Testing

DTIC Science & Technology

2012-07-01

specific gravity of 2.7, optimum moisture content of 2.6 percent, and a maximum dry density of 114.2 pcf. Figure 5 shows the Proctor curve developed by...4  Figure 3. Dry density versus moisture content for CH material...6  Figure 5. Dry density versus moisture content for blended GM base course. ..................................... 7  Figure 6

Reliability of drivers in urban intersections.

PubMed

Gstalter, Herbert; Fastenmeier, Wolfgang

2010-01-01

The concept of human reliability has been widely used in industrial settings by human factors experts to optimise the person-task fit. Reliability is estimated by the probability that a task will successfully be completed by personnel in a given stage of system operation. Human Reliability Analysis (HRA) is a technique used to calculate human error probabilities as the ratio of errors committed to the number of opportunities for that error. To transfer this notion to the measurement of car driver reliability the following components are necessary: a taxonomy of driving tasks, a definition of correct behaviour in each of these tasks, a list of errors as deviations from the correct actions and an adequate observation method to register errors and opportunities for these errors. Use of the SAFE-task analysis procedure recently made it possible to derive driver errors directly from the normative analysis of behavioural requirements. Driver reliability estimates could be used to compare groups of tasks (e.g. different types of intersections with their respective regulations) as well as groups of drivers' or individual drivers' aptitudes. This approach was tested in a field study with 62 drivers of different age groups. The subjects drove an instrumented car and had to complete an urban test route, the main features of which were 18 intersections representing six different driving tasks. The subjects were accompanied by two trained observers who recorded driver errors using standardized observation sheets. Results indicate that error indices often vary between both the age group of drivers and the type of driving task. The highest error indices occurred in the non-signalised intersection tasks and the roundabout, which exactly equals the corresponding ratings of task complexity from the SAFE analysis. A comparison of age groups clearly shows the disadvantage of older drivers, whose error indices in nearly all tasks are significantly higher than those of the other groups. The vast majority of these errors could be explained by high task load in the intersections, as they represent difficult tasks. The discussion shows how reliability estimates can be used in a constructive way to propose changes in car design, intersection layout and regulation as well as driver training.

9. VIEW OF BOOSTER STATION 3 INTERIOR, FACING NORTHEAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. VIEW OF BOOSTER STATION 3 INTERIOR, FACING NORTHEAST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

6. VIEW OF BOOSTER STATION 2 INTERIOR, FACING WEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW OF BOOSTER STATION 2 INTERIOR, FACING WEST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

12. VIEW OF BOOSTER STATION 4 INTERIOR, FACING SOUTHWEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. VIEW OF BOOSTER STATION 4 INTERIOR, FACING SOUTHWEST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

3. VIEW OF BOOSTER STATION 1 INTERIOR, FACING EAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW OF BOOSTER STATION 1 INTERIOR, FACING EAST - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

The Bender Gestalt Test with the Human Figure Drawing Test for Young School Children. A Manual for Use with the Koppitz Scoring System.

ERIC Educational Resources Information Center

Koppitz, Elizabeth Munsterberg

Presented is a manual for scoring the Bender Gestalt Test and the Human Figure Drawing Test for screening and diagnostic uses with emotionally disturbed, brain damaged, or perceptually handicapped 5- to 11-year-old children. Given are suggestions for administering and scoring the Bender test which examines distortion of shape, rotation,…

Measuring the Pros and Cons of What It Means to Be a Black Man: Development and Validation of the Black Men’s Experiences Scale (BMES)

PubMed Central

Bowleg, Lisa; English, Devin; del Rio-Gonzalez, Ana Maria; Burkholder, Gary J.; Teti, Michelle; Tschann, Jeanne M.

2015-01-01

Although extensive research documents that Black people in the U.S. frequently experience social discrimination, most of this research aggregates these experiences primarily or exclusively by race. Consequently, empirical gaps exist about the psychosocial costs and benefits of Black men’s experiences at the intersection of race and gender. Informed by intersectionality, a theoretical framework that highlights how multiple social identities intersect to reflect interlocking social-structural inequality, this study addresses these gaps with the qualitative development and quantitative test of the Black Men’s Experiences Scale (BMES). The BMES assesses Black men’s negative experiences with overt discrimination and microaggressions, as well their positive evaluations of what it means to be Black men. First, we conducted focus groups and individual interviews with Black men to develop the BMES. Next, we tested the BMES with 578 predominantly low-income urban Black men between the ages of 18 and 44. Exploratory factor analysis suggested a 12-item, 3-factor solution that explained 63.7% of the variance. We labeled the subscales: Overt Discrimination, Microaggressions, and Positives: Black Men. Confirmatory factor analysis supported the three-factor solution. As hypothesized, the BMES’s subscales correlated with measures of racial discrimination, depression, resilience, and social class at the neighborhood-level. Preliminary evidence suggests that the BMES is a reliable and valid measure of Black men’s experiences at the intersection of race and gender. PMID:27087786

Measuring the Pros and Cons of What It Means to Be a Black Man: Development and Validation of the Black Men's Experiences Scale (BMES).

PubMed

Bowleg, Lisa; English, Devin; Del Rio-Gonzalez, Ana Maria; Burkholder, Gary J; Teti, Michelle; Tschann, Jeanne M

2016-04-01

Although extensive research documents that Black people in the U.S. frequently experience social discrimination, most of this research aggregates these experiences primarily or exclusively by race. Consequently, empirical gaps exist about the psychosocial costs and benefits of Black men's experiences at the intersection of race and gender. Informed by intersectionality, a theoretical framework that highlights how multiple social identities intersect to reflect interlocking social-structural inequality, this study addresses these gaps with the qualitative development and quantitative test of the Black Men's Experiences Scale (BMES). The BMES assesses Black men's negative experiences with overt discrimination and microaggressions, as well their positive evaluations of what it means to be Black men. First, we conducted focus groups and individual interviews with Black men to develop the BMES. Next, we tested the BMES with 578 predominantly low-income urban Black men between the ages of 18 and 44. Exploratory factor analysis suggested a 12-item, 3-factor solution that explained 63.7% of the variance. We labeled the subscales: Overt Discrimination, Microaggressions, and Positives: Black Men . Confirmatory factor analysis supported the three-factor solution. As hypothesized, the BMES's subscales correlated with measures of racial discrimination, depression, resilience, and social class at the neighborhood-level. Preliminary evidence suggests that the BMES is a reliable and valid measure of Black men's experiences at the intersection of race and gender.

Language Test as Boundary Object: Perspectives from Test Users in the Healthcare Domain

ERIC Educational Resources Information Center

Macqueen, Susy; Pill, John; Knoch, Ute

2016-01-01

Objects that sit between intersecting social worlds, such as Language for Specific Purposes (LSP) tests, are "boundary objects"--dynamic, historically derived mechanisms which maintain coherence between worlds (Star & Griesemer, 1989). They emerge initially from sociopolitical mandates, such as the need to ensure a safe and efficient…

28. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. AIR COOLED TEST STAND. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

Estrogenicity of resin-based composites and sealants used in dentistry.

PubMed Central

Olea, N; Pulgar, R; Pérez, P; Olea-Serrano, F; Rivas, A; Novillo-Fertrell, A; Pedraza, V; Soto, A M; Sonnenschein, C

1996-01-01

We tested some resin-based composites used in dentistry for their estrogenic activity. A sealant based on bisphenol-A diglycidylether methacrylate (bis-GMA) increased cell yields, progesterone receptor expression, and pS2 secretion in human estrogen-target, serum-sensitive MCF7 breast cancer cells. Estrogenicity was due to bisphenol-A and bisphenol-A dimethacrylate, monomers found in the base paste of the dental sealant and identified by mass spectrometry. Samples of saliva from 18 subjects treated with 50 mg of a bis-GMA-based sealant applied on their molars were collected 1 hr before and after treatment. Bisphenol-A (range 90-931 micrograms) was identified only in saliva collected during a 1-hr period after treatment. The use of bis-GMA-based resins in dentistry, and particularly the use of sealants in children, appears to contribute to human exposure to xenoestrogens. Images Figure 1. A Figure 1. B Figure 2. Figure 3. A Figure 3. B Figure 4. A Figure 4. B Figure 5. A Figure 5. B Figure 6. A Figure 6. B Figure 7. A Figure 7. B Figure 8. Figure 9. Figure 10. PMID:8919768

The Relationship between Tests of Creativity and Perception.

ERIC Educational Resources Information Center

Lindauer, Martin S.

The relationship between creativity and perception was examined in two studies that correlated a combined total of 11 tests of perception (e.g., figure-ground and physiognomy) and creativity (e.g., remote associates and figure preferences). Four of the tests dealt with perception, five with creativity, and two with both. Since several of the tests…

16 CFR Figure 1 to Subpart A of... - Glass Impact Test Structure

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Glass Impact Test Structure 1 Figure 1 to Subpart A of Part 1201 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT... 1 to Subpart A of Part 1201—Glass Impact Test Structure EC03OC91.004 ...

16 CFR Figure 1 to Subpart A of... - Glass Impact Test Structure

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Glass Impact Test Structure 1 Figure 1 to Subpart A of Part 1201 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT... 1 to Subpart A of Part 1201—Glass Impact Test Structure EC03OC91.004 ...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2010 CFR

2010-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2011 CFR

2011-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2013 CFR

2013-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 6 2013-07-01 2013-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2014 CFR

2014-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 6 2014-07-01 2014-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

40 CFR Figure F-1 to Subpart F of... - Designation Testing Checklist

Code of Federal Regulations, 2012 CFR

2012-07-01

... tests must be performed:§ 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static... 40 Protection of Environment 6 2012-07-01 2012-07-01 false Designation Testing Checklist F Figure F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

Functional Assessment of Laser Irradiation

DTIC Science & Technology

1988-03-01

1 Diagram of the Plexiglas restraint device used during laser exposure and acuity testing ........................................... 4 FIGURE 2...8 FIGURE 6 Spectral sensitivity curves for rhesus, human trichromat, and protonomalous human tested under similar...luminance, wavelength and logical means (fundoscopic or histologic verification contrast of test targets have yielded various damac of tissue damage) or can

A FORTRAN Computer Program to Perform Goodness of Fit Testing on Empirical Data.

DTIC Science & Technology

1979-06-01

11 9. Mesokurtic Shape ....... ................. 1210. Platykurtic Shape ..... .. ................ 12 11. Leptokurtic Shape...distribution is platykurtic and if K is greater than 3, the distribution is described as leptokurtic. Figures 9, 10, and 11 illustrate mesokurtic... platykurtic , and leptokurtic shapes (8). Figure 9 Figure 10 Figure 11 Mesokurtic Shape Platykurtic Shape Leptokurtic Shape The population parameters for

Fortuin-Kasteleyn and damage-spreading transitions in random-bond Ising lattices

NASA Astrophysics Data System (ADS)

Lundow, P. H.; Campbell, I. A.

2012-10-01

The Fortuin-Kasteleyn and heat-bath damage-spreading temperatures TFK(p) and TDS(p) are studied on random-bond Ising models of dimensions 2-5 and as functions of the ferromagnetic interaction probability p; the conjecture that TDS(p)˜TFK(p) is tested. It follows from a statement by Nishimori that in any such system, exact coordinates can be given for the intersection point between the Fortuin-Kasteleyn TFK(p) transition line and the Nishimori line [pNL,FK,TNL,FK]. There are no finite-size corrections for this intersection point. In dimension 3, at the intersection concentration [pNL,FK], the damage spreading TDS(p) is found to be equal to TFK(p) to within 0.1%. For the other dimensions, however, TDS(p) is observed to be systematically a few percent lower than TFK(p).

13. VIEW OF BOOSTER STATION 4 CHLORINATOR INTERIOR, FACING NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. VIEW OF BOOSTER STATION 4 CHLORINATOR INTERIOR, FACING NORTH - Nevada Test Site, Frenchman Flat Test Facility, Well Five Booster Stations, Intersection of 5-03 Road & Short Pole Line Road, Area 5, Frenchman Flat, Mercury, Nye County, NV

Proposed test protocol for video imaging detection at intersection stop lines.

DOT National Transportation Integrated Search

2010-08-01

Test protocols for non-loop detectors have often required comparing the performance : attributes of these detectors with those of loops or other point detectors, or to manual counts. : However, that comparison is not always appropriate for a variety ...

Changes in area affect figure-ground assignment in pigeons.

PubMed

Castro, Leyre; Lazareva, Olga F; Vecera, Shaun P; Wasserman, Edward A

2010-03-05

A critical cue for figure-ground assignment in humans is area: smaller regions are more likely to be perceived as figures than are larger regions. To see if pigeons are similarly sensitive to this cue, we trained birds to report whether a target appeared on a colored figure or on a differently colored background. The initial training figure was either smaller than (Experiments 1 and 2) or the same area as (Experiment 2) the background. After training, we increased or decreased the size of the figure. When the original training shape was smaller than the background, pigeons' performance improved with smaller figures (and worsened with larger figures); when the original training shape was the same area as the background, pigeons' performance worsened when they were tested with smaller figures. A smaller figural region appeared to improve the figure-ground discrimination only when size was a relevant cue in the initial discrimination.

Figure-ground assignment in pigeons: evidence for a figural benefit.

PubMed

Lazareva, Olga E; Castro, Leyre; Vecera, Shaun P; Wasserman, Edward A

2006-07-01

Four pigeons discriminated whether a target spot appeared on a colored figural shape or on a differently colored background by first pecking the target and then reporting its location: on the figure or the background. We recorded three dependent variables: target detection time, choice response time, and choice accuracy. The birds were faster to detect the target, to report its location, and to learn the correct response on figure trials than on background trials. Later tests suggested that the pigeons might have attended to the figural region as a whole rather than using local properties in performing the figure-background discrimination. The location of the figural region did not affect figure-ground assignment. Finally, when 4 other pigeons had to detect and peck the target without making a choice report, no figural advantage emerged in target detection time, suggesting that the birds' attention may not have been automatically summoned to the figural region.

Comparison of the Medical College of Georgia Complex Figures and the Rey-Osterrieth Complex Figure tests in a normal sample of Japanese university students.

PubMed

Yamashita, Hikari; Yasugi, Mina

2008-08-01

Comparability of copy and recall performance on the four figures of the Medical College of Georgia Complex Figures and the Rey-Osterrieth Complex Figure were examined using an incidental learning paradigm with 60 men and 60 women, healthy volunteers between the ages of 18 and 24 years (M = 21.5 yr., SD = 1.5) at a Japanese university. A between-subjects design was used in which each group of participants (n = 24) responded to five figures. The interrater reliability of each Georgia figure was excellent. While the five figures yielded equivalent copy scores, the Rey-Osterrieth figure had significantly lower scores than the Georgia figures at recall after 3 min. There were no significant differences between the four Georgia figures. These results are consistent with the findings of the original studies in the USA.

Changes in Area Affect Figure-Ground Assignment in Pigeons

PubMed Central

Castro, Leyre; Lazareva, Olga F.; Vecera, Shaun P.; Wasserman, Edward A.

2010-01-01

A critical cue for figure-ground assignment in humans is area: Smaller regions are more likely to be perceived as figures than are larger regions. To see if pigeons are similarly sensitive to this cue, we trained birds to report whether a target appeared on a colored figure or on a differently colored background. The initial training figure was either smaller than (Experiments 1 and 2) or the same area as (Experiment 2) the background. After training, we increased or decreased the size of the figure. When the original training shape was smaller than the background, pigeons’ performance improved with smaller figures (and worsened with larger figures); when the original training shape was the same area as the background, pigeons’ performance worsened when they were tested with smaller figures. A smaller figural region appeared to improve the figure-ground discrimination only when size was a relevant cue in the initial discrimination. PMID:20060406

Application of Bridge Pier Scour Equations for Large Woody Vegetation

DTIC Science & Technology

2016-07-01

official Department of the Army position unless so designated by other authorized documents. DESTROY THIS REPORT WHEN NO LONGER NEEDED. DO NOT...11 Figure 3. Standing tree test configuration, pretest ...12 Figure 4. Fallen tree test configuration, pretest

Immunocytochemical Studies of Neurofibrillary Tangles

PubMed Central

Yen, Shu-Hui C.; Gaskin, Felicia; Terry, Robert D.

1981-01-01

The molecular nature of neurofibrillary tangles of senile dementia of the Alzheimer type (SDAT) was studied by immunoperoxidase and immunofluorescence techniques. Five antiserums, including anti-humanbrain-2-cycle-purified-microtubule-fractions (2 × MT), anti-calf-brain-2 × MT, anti-sea-urchin-egg-tubulin, antibeef-brain-tubulin, and anti-human-brain-neurofilament(NF)-210-kilodalton(kd)-protein were tested for their binding to neurofibrillary tangles. The antihuman-2 × MT serum stained structures resembling neurofibrillary tangles, neurites of neuritic plaques, and microglialike cells in SDAT brains, but no such staining pattern was detected in normal brain sections. In neurons isolated from SDAT brains, about 40% of the tangles were labeled by the anti-human-2×MT serum with an identical pattern. Other antiserums tested did not preferentially bind tanglelike structures in tissue sections and bound to less than 5% of the tangles in isolated neurons. These results suggest that the antigenic sites of tubulin and NF proteins are not shared by neurofibrillary tangles. Different from the calf preparation, the human-2 × MT fractions contained a prominent protein band that was identical to ferritin in molecular weight and cross-reacted with anti-human-2 × MT and anti-human-ferritin serums. However, antiserums to this ferritinlike protein, or anti-ferritin, did not stain neurofibrillary tangles. Although neither the calf 2 × MT nor two other human MT fractions failed to elicit an antiserum that stained tangles, these fractions were able to remove the antihuman-2 × MT serum activity that binds to tangles. The data suggest that the protein (or proteins) that makes up neurofibrillary tangles of SDAT is present in various quantities in microtubule fractions of normal brain. ImagesFigure 1Figure 2Figure 3Figure 4Figure 5Figure 6Figure 7Figure 8Figure 9Figure 10Figure 11Figure 12Figure 13Figure 14Figure 15Figure 16 PMID:7020426

High Velocity Firings of Slug Projectiles in a Double-Travel 120-MM Gun System

DTIC Science & Technology

1991-04-01

constraints presented by TBD. This charge configuration was then tested using aluminium slug projectiles to avoid the unnecessary expenditure of APFSDS...test projectile was a depleted uranium alloy (U-.75Ti) rod with a standard, four piece, aluminum sabot assembly. The launch package had a nominal...the rod is shown in Figure 2. Figure 2. Scaled, Long Rod Penetrator. Figure 3. Aluminium Slug Projectile. The aluminium slug rounds, fired at Range 18

Improved Foundry Castings Utilizing CAD/CAM (Computer Aided Design/ Computer Aided Manufacture). Volume 1. Overview

DTIC Science & Technology

1988-06-30

casting. 68 Figure 1-9: Line printer representation of roll solidification. 69 Figure I1-1: Test casting model. 76 Figure 11-2: Division of test casting...writing new casting analysis and design routines. The new routines would take advantage of advanced criteria for predicting casting soundness and cast...properties and technical advances in computer hardware and software. 11 2. CONCLUSIONS UPCAST, a comprehensive software package, has been developed for

General Model Study of Scour at Proposed Pier Extensions - Santa Ana River at BNSF Bridge, Corona, California

DTIC Science & Technology

2017-11-01

model of the bridge piers, other related structures, and the adjacent channel. Data from the model provided a qualitative and quantitative evaluation of...minus post-test lidar survey . ......................... 42 Figure 38. Test 1 (30,000 cfs existing conditions) pre- minus post-test lidar survey ...43 Figure 39. Test 7 (15,000 cfs original proposed conditions) pre- minus post-test lidar survey

WHEN SHOCK WAVES COLLIDE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hartigan, P.; Liao, A. S.; Foster, J.

2016-06-01

Supersonic outflows from objects as varied as stellar jets, massive stars, and novae often exhibit multiple shock waves that overlap one another. When the intersection angle between two shock waves exceeds a critical value, the system reconfigures its geometry to create a normal shock known as a Mach stem where the shocks meet. Mach stems are important for interpreting emission-line images of shocked gas because a normal shock produces higher postshock temperatures, and therefore a higher-excitation spectrum than does an oblique shock. In this paper, we summarize the results of a series of numerical simulations and laboratory experiments designed tomore » quantify how Mach stems behave in supersonic plasmas that are the norm in astrophysical flows. The experiments test analytical predictions for critical angles where Mach stems should form, and quantify how Mach stems grow and decay as intersection angles between the incident shock and a surface change. While small Mach stems are destroyed by surface irregularities and subcritical angles, larger ones persist in these situations and can regrow if the intersection angle changes to become more favorable. The experimental and numerical results show that although Mach stems occur only over a limited range of intersection angles and size scales, within these ranges they are relatively robust, and hence are a viable explanation for variable bright knots observed in Hubble Space Telescope images at the intersections of some bow shocks in stellar jets.« less

When shock waves collide

DOE PAGES

Martinez, D.; Hartigan, P.; Frank, A.; ...

2016-06-01

Supersonic outflows from objects as varied as stellar jets, massive stars, and novae often exhibit multiple shock waves that overlap one another. When the intersection angle between two shock waves exceeds a critical value, the system reconfigures its geometry to create a normal shock known as a Mach stem where the shocks meet. Mach stems are important for interpreting emission-line images of shocked gas because a normal shock produces higher postshock temperatures, and therefore a higher-excitation spectrum than does an oblique shock. In this paper, we summarize the results of a series of numerical simulations and laboratory experiments designed tomore » quantify how Mach stems behave in supersonic plasmas that are the norm in astrophysical flows. The experiments test analytical predictions for critical angles where Mach stems should form, and quantify how Mach stems grow and decay as intersection angles between the incident shock and a surface change. While small Mach stems are destroyed by surface irregularities and subcritical angles, larger ones persist in these situations and can regrow if the intersection angle changes to become more favorable. Furthermore, the experimental and numerical results show that although Mach stems occur only over a limited range of intersection angles and size scales, within these ranges they are relatively robust, and hence are a viable explanation for variable bright knots observed in Hubble Space Telescope images at the intersections of some bow shocks in stellar jets.« less

Convolutional Neural Networks as Feature Extractors for Data Scarce Visual Searches

DTIC Science & Technology

2016-09-01

50 Figure C.16 TP for the Ferrari Logo (layer=FC7). . . . . . . . . . . . . . . . 50 Figure C.17 TP for the Kia Logo (layer=FC6...51 Figure C.18 TP for the Kia Logo (layer=FC7). . . . . . . . . . . . . . . . . . 51 Figure C.19 TP for the Liege Logo (layer=FC6...represent results for test samples from the Ferrari class for k=1, k=3, and k=5. 50 Figure C.17. TP for the Kia Logo (layer=FC6). The x-axis represents

46 CFR 162.050-17 - Separator test rig.

Code of Federal Regulations, 2014 CFR

2014-10-01

... diagram of a typical test rig is shown in Figure 162.050-17(a). FIGURE 162.050-17(a)—SEPARATOR TEST RIG... discharge side. (c) The inlet piping of the test rig must be sized so that— (1) Influent water flows at a Reynolds Number of at least 10,000; (2) The influent flow rate is between one and three meters per second...

46 CFR 162.050-17 - Separator test rig.

Code of Federal Regulations, 2011 CFR

2011-10-01

... diagram of a typical test rig is shown in Figure 162.050-17(a). FIGURE 162.050-17(a)—SEPARATOR TEST RIG... discharge side. (c) The inlet piping of the test rig must be sized so that— (1) Influent water flows at a Reynolds Number of at least 10,000; (2) The influent flow rate is between one and three meters per second...

46 CFR 162.050-17 - Separator test rig.

Code of Federal Regulations, 2010 CFR

2010-10-01

... diagram of a typical test rig is shown in Figure 162.050-17(a). FIGURE 162.050-17(a)—SEPARATOR TEST RIG... discharge side. (c) The inlet piping of the test rig must be sized so that— (1) Influent water flows at a Reynolds Number of at least 10,000; (2) The influent flow rate is between one and three meters per second...

46 CFR 162.050-17 - Separator test rig.

Code of Federal Regulations, 2013 CFR

2013-10-01

... diagram of a typical test rig is shown in Figure 162.050-17(a). FIGURE 162.050-17(a)—SEPARATOR TEST RIG... discharge side. (c) The inlet piping of the test rig must be sized so that— (1) Influent water flows at a Reynolds Number of at least 10,000; (2) The influent flow rate is between one and three meters per second...

46 CFR 162.050-17 - Separator test rig.

Code of Federal Regulations, 2012 CFR

2012-10-01

... diagram of a typical test rig is shown in Figure 162.050-17(a). FIGURE 162.050-17(a)—SEPARATOR TEST RIG... discharge side. (c) The inlet piping of the test rig must be sized so that— (1) Influent water flows at a Reynolds Number of at least 10,000; (2) The influent flow rate is between one and three meters per second...

Chip connectivity verification program

NASA Technical Reports Server (NTRS)

Riley, Josh (Inventor); Patterson, George (Inventor)

1999-01-01

A method for testing electrical connectivity between conductive structures on a chip that is preferably layered with conductive and nonconductive layers. The method includes determining the layer on which each structure is located and defining the perimeter of each structure. Conductive layer connections between each of the layers are determined, and, for each structure, the points of intersection between the perimeter of that structure and the perimeter of each other structure on the chip are also determined. Finally, electrical connections between the structures are determined using the points of intersection and the conductive layer connections.

Precise deformation measurement of prestressed concrete beam during a strain test using the combination of intersection photogrammetry and micro-network measurement

NASA Astrophysics Data System (ADS)

Urban, Rudolf; Braun, Jaroslav; Štroner, Martin

2015-05-01

The prestressed thin-walled concrete elements enable the bridge a relatively large span. These structures are advantageous in economic and environmental way due to their thickness and lower consumption of materials. The bending moments can be effectively influenced by using the pre-stress. The experiment was done to monitor deformation of the under load. During the experiment the discrete points were monitored. To determine a large number of points, the intersection photogrammetry combined with precise micro-network were chosen. Keywords:

HYPERCALCURIA AND METABOLIC BONE DISEASE

PubMed Central

Rosenberg, Milton L.

1954-01-01

Hypercalcuria leading to nephrocalcinosis and nephrolithiasis may be secondary to a number of causes. In most instances, the history, physical examination, a few simple laboratory tests and x-ray study of the bones will reveal the true primary diagnosis. Specific treatment, if instituted early, will result in a satisfactory response and prevent the progression of renal complications. ImagesFigure 1.Figure 2.Figure 3.Figure 4. PMID:13209371

Crack Initiation and Growth Behavior at Corrosion Pit in 2024-T3 Aluminum Alloy

DTIC Science & Technology

2014-09-01

63 Figure B.1: The crack length vs. number of cycles during fatigue testing for the 2AI-01 specimen...number of cycles during fatigue testing for the the 2AI- 02 specimen...64 Figure B.3: The crack length vs. number of cycles during fatigue testing for the 2Sl-01 specimen

Software Measurement Guidebook. Version 02.00.02

DTIC Science & Technology

1992-12-01

Compatibility Testing Process .............................. 9-5 Figure 9-3. Development Effort Planning Curve ................................. 9-7 Figure 10-1...requirements, design, code, and test and for analyzing this data. "* Proposal Manager. The person responsible for describing and supporting the estimated...designed, build/elease ranges, variances, and comparisons size growth; costs; completions; and content, units completing test , units with historical

Relationship between molecular connectivity and carcinogenic activity: a confirmation with a new software program based on graph theory.

PubMed Central

Malacarne, D; Pesenti, R; Paolucci, M; Parodi, S

1993-01-01

For a database of 826 chemicals tested for carcinogenicity, we fragmented the structural formula of the chemicals into all possible contiguous-atom fragments with size between two and eight (nonhydrogen) atoms. The fragmentation was obtained using a new software program based on graph theory. We used 80% of the chemicals as a training set and 20% as a test set. The two sets were obtained by random sorting. From the training sets, an average (8 computer runs with independently sorted chemicals) of 315 different fragments were significantly (p < 0.125) associated with carcinogenicity or lack thereof. Even using this relatively low level of statistical significance, 23% of the molecules of the test sets lacked significant fragments. For 77% of the molecules of the test sets, we used the presence of significant fragments to predict carcinogenicity. The average level of accuracy of the predictions in the test sets was 67.5%. Chemicals containing only positive fragments were predicted with an accuracy of 78.7%. The level of accuracy was around 60% for chemicals characterized by contradictory fragments or only negative fragments. In a parallel manner, we performed eight paired runs in which carcinogenicity was attributed randomly to the molecules of the training sets. The fragments generated by these pseudo-training sets were devoid of any predictivity in the corresponding test sets. Using an independent software program, we confirmed (for the complex biological endpoint of carcinogenicity) the validity of a structure-activity relationship approach of the type proposed by Klopman and Rosenkranz with their CASE program. Images Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. PMID:8275991

Robust Seismic Normal Modes Computation in Radial Earth Models and A Novel Classification Based on Intersection Points of Waveguides

NASA Astrophysics Data System (ADS)

Ye, J.; Shi, J.; De Hoop, M. V.

2017-12-01

We develop a robust algorithm to compute seismic normal modes in a spherically symmetric, non-rotating Earth. A well-known problem is the cross-contamination of modes near "intersections" of dispersion curves for separate waveguides. Our novel computational approach completely avoids artificial degeneracies by guaranteeing orthonormality among the eigenfunctions. We extend Wiggins' and Buland's work, and reformulate the Sturm-Liouville problem as a generalized eigenvalue problem with the Rayleigh-Ritz Galerkin method. A special projection operator incorporating the gravity terms proposed by de Hoop and a displacement/pressure formulation are utilized in the fluid outer core to project out the essential spectrum. Moreover, the weak variational form enables us to achieve high accuracy across the solid-fluid boundary, especially for Stoneley modes, which have exponentially decaying behavior. We also employ the mixed finite element technique to avoid spurious pressure modes arising from discretization schemes and a numerical inf-sup test is performed following Bathe's work. In addition, the self-gravitation terms are reformulated to avoid computations outside the Earth, thanks to the domain decomposition technique. Our package enables us to study the physical properties of intersection points of waveguides. According to Okal's classification theory, the group velocities should be continuous within a branch of the same mode family. However, we have found that there will be a small "bump" near intersection points, which is consistent with Miropol'sky's observation. In fact, we can loosely regard Earth's surface and the CMB as independent waveguides. For those modes that are far from the intersection points, their eigenfunctions are localized in the corresponding waveguides. However, those that are close to intersection points will have physical features of both waveguides, which means they cannot be classified in either family. Our results improve on Okal's classification, demonstrating that dispersion curves from independent waveguides should be considered to break at intersection points.

A new innovative spectrophotometric method for the simultaneous determination of sofosbuvir and ledipasvir

NASA Astrophysics Data System (ADS)

Mansour, Fotouh R.

2018-01-01

A new innovative spectrophotometric method is developed to determine the concentration ratios in binary mixtures by determining the zero crossing point in the first derivative of the gross curve. This relationship can be applied if the part of the UV spectrum of substance Y, that intersects with the overlaid spectra of substance X is straight. By plotting the intersection wavelength against the concentration ratio (Cx/Cy), a straight line was obtained with a co-efficient of determination equals 0.9999. As an application, simultaneous determination of sofosbuvir and ledipasvir in their binary mixtures was performed using two methods; a direct UV spectrophotometric method for determination of ledipasvir at 333 nm, and the new "wavelength-intersection ratio" method for determination of sofosbuvir. In the wavelength-intersection ratio method, different mixtures of sofosbuvir and ledipasvir containing different concentration ratios were prepared; the zero crossing point of the first derivative curve in the range 285 to 295 nm were determined for each mixture. An absorbance shift in the intersection was obtained with the change in the concentration ratio (sofosbuvir/ledipasvir). When the concentration ratio was plotted against the intersection wavelength, a straight line was obtained with a coefficient of determination of 0.9992. The direct method was linear in the range 3 to 18 μg/mL while the wavelength-intersection ratio method was linear in the range 11-110 μg/mL. The limits of detection were determined and found to be 0.5 and 3 μg/mL for ledipasvir and sofosbuvir, respectively. The accuracy and repeatability of the two methods were tested. The mean %recovery was found to be 100.19% and 100.75% for ledipasvir and sofosbuvir, respectively. The relative standard deviation was 0.57 for ledipasvir and 1.79 for sofosbuvir. The intermediate precision was also checked, the coefficients of variation for sofosbuvir and ledipasvir measurements between days did not exceed 1.88%.

PRELIMINARY STUDIES OF THE GASTROINTESTINAL TRACT WITH COLLOIDAL BARIUM

PubMed Central

Windholz, Frank; Kaplan, Henry S.; Jones, Henry H.

1951-01-01

A stable colloidal suspension of barium sulfate has been developed and tested in roentgen examination of the gastrointestinal tract. The new material is rather distinctive in radiographic appearance and can usually be differentiated from simple barium-water mixtures by inspection of roentgenograms of the opacified stomach and small intestine. It usually affords a satisfactory demonstration of the mucosal folds of the stomach and duodenal bulb and is considerably more resistant to flocculation and precipitation by retained gastric secretions. In the small intestine, it has little tendency to undergo flocculation and fragmentation, and permits visualization of fine mucosal configurations with unusual clarity. Its motility is about the same as that of conventional suspensions. Air contrast colon examinations with the colloidal preparation exhibit a very uniform, opaque, and stable coating of the bowel wall and are more consistently satisfactory than when simple barium-water mixtures are used. ImagesFigure 1.Figure 1.Figure 1.Figure 1.Figure 2.Figure 2.Figure 3.Figure 4.Figure 4.Figure 5.Figure 5.Figure 6. PMID:14812347

Augmented l1 and Nuclear-Norm Models with a Globally Linearly Convergent Algorithm. Revision 1

DTIC Science & Technology

2012-10-17

nonzero and sampled from the standard Gaussian distribution (for Figure 2) or the Bernoulli distribution (for Figure 3). Both tests had the same sensing...dual variable y(k) Figure 3: Convergence of primal and dual variables of three algorithms on Bernoulli sparse x0 was the slowest. Besides the obvious...slower convergence than the final stage. Comparing the results of two tests, the convergence was faster on the Bernoulli sparse signal than the

40 CFR Figure C-1 to Subpart C of... - Suggested Format for Reporting Test Results for Methods for SO 2, CO, O 3, NO 2

Code of Federal Regulations, 2011 CFR

2011-07-01

... Results for Methods for SO 2, CO, O 3, NO 2 C Figure C-1 to Subpart C of Part 53 Protection of Environment... Pt. 53, Subpt. C, Fig. C-1 Figure C-1 to Subpart C of Part 53—Suggested Format for Reporting Test... Difference Table C-1 spec. Pass or fail Low 1 ____ ppm 2 to ____ ppm 3 4 5 6 Medium 1 ____ ppm 2 to ____ ppm...

40 CFR Figure C-1 to Subpart C of... - Suggested Format for Reporting Test Results for Methods for SO 2, CO, O 3, NO 2

Code of Federal Regulations, 2014 CFR

2014-07-01

... Results for Methods for SO 2, CO, O 3, NO 2 C Figure C-1 to Subpart C of Part 53 Protection of Environment... Pt. 53, Subpt. C, Fig. C-1 Figure C-1 to Subpart C of Part 53—Suggested Format for Reporting Test... Difference Table C-1 spec. Pass or fail Low 1 ____ ppm 2 to ____ ppm 3 4 5 6 Medium 1 ____ ppm 2 to ____ ppm...

40 CFR Figure C-1 to Subpart C of... - Suggested Format for Reporting Test Results for Methods for SO 2, CO, O 3, NO 2

Code of Federal Regulations, 2012 CFR

2012-07-01

... Results for Methods for SO 2, CO, O 3, NO 2 C Figure C-1 to Subpart C of Part 53 Protection of Environment... Pt. 53, Subpt. C, Fig. C-1 Figure C-1 to Subpart C of Part 53—Suggested Format for Reporting Test... Difference Table C-1 spec. Pass or fail Low 1 ____ ppm 2 to ____ ppm 3 4 5 6 Medium 1 ____ ppm 2 to ____ ppm...

40 CFR Figure C-1 to Subpart C of... - Suggested Format for Reporting Test Results for Methods for SO 2, CO, O 3, NO 2

Code of Federal Regulations, 2010 CFR

2010-07-01

... Results for Methods for SO 2, CO, O 3, NO 2 C Figure C-1 to Subpart C of Part 53 Protection of Environment... Pt. 53, Subpt. C, Fig. C-1 Figure C-1 to Subpart C of Part 53—Suggested Format for Reporting Test... Difference Table C-1 spec. Pass or fail Low 1 ____ ppm 2 to ____ ppm 3 4 5 6 Medium 1 ____ ppm 2 to ____ ppm...

Reducing a congestion with introduce the greedy algorithm on traffic light control

NASA Astrophysics Data System (ADS)

Catur Siswipraptini, Puji; Hendro Martono, Wisnu; Hartanti, Dian

2018-03-01

The density of vehicles causes congestion seen at every junction in the city of jakarta due to the static or manual traffic timing lamp system consequently the length of the queue at the junction is uncertain. The research has been aimed at designing a sensor based traffic system based on the queue length detection of the vehicle to optimize the duration of the green light. In detecting the length of the queue of vehicles using infrared sensor assistance placed in each intersection path, then apply Greedy algorithm to help accelerate the movement of green light duration for the path that requires, while to apply the traffic lights regulation program based on greedy algorithm which is then stored on microcontroller with Arduino Mega 2560 type. Where a developed system implements the greedy algorithm with the help of the infrared sensor it will extend the duration of the green light on the long vehicle queue and accelerate the duration of the green light at the intersection that has the queue not too dense. Furthermore, the design is made to form an artificial form of the actual situation of the scale model or simple simulator (next we just called as scale model of simulator) of the intersection then tested. Sensors used are infrared sensors, where the placement of sensors in each intersection on the scale model is placed within 10 cm of each sensor and serves as a queue detector. From the results of the test process on the scale model with a longer queue obtained longer green light time so it will fix the problem of long queue of vehicles. Using greedy algorithms can add long green lights for 2 seconds on tracks that have long queues at least three sensor levels and accelerate time at other intersections that have longer queue sensor levels less than level three.

Optimal design of a Φ760 mm lightweight SiC mirror and the flexural mount for a space telescope

NASA Astrophysics Data System (ADS)

Li, Zongxuan; Chen, Xue; Wang, Shaoju; Jin, Guang

2017-12-01

A flexural support technique for lightweighted Primary Mirror Assembly (PMA) of a space telescope is presented in this article. The proposed three-point flexural mount based on a cartwheel flexure can maintain the surface figure of the PMA in a horizontal optical testing layout. The on-orbit surface error of the PMA causes significant degradation in image quality. On-ground optical testing cannot determine the zero-gravity figure of the PMA due to surface distortion by gravity. We unveiled the crucial fact that through a delicate mounting structure design, the surface figure can remain constant precisely without inducing distinguishable astigmatism when PMA rotates with respect to the optical axis, and the figure can be considered as the zero-gravity surface figure on the orbit. A design case is described to show the lightweight design of a SiC mirror and the optimal flexural mounting. Topology optimization and integrated opto-mechanical analysis using the finite element method are utilized in the design process. The Primary Mirror and mounting structures were fabricated and assembled. After the PMA mirror surface was polished to λ/50 RMS, optical testing in different clocking configurations was performed, respectively, through rotating the PMA by multiple angles. Test results show that the surface figure remained invariant, indicating that gravity release on the orbit will not cause an additional surface error. Vibration tests including sweep sine and random vibration were also performed to validate the mechanical design. The requirements for the mounting technique in space were qualified.

Evaluation of creative thinking in children with idiopathic epilepsy (absence epilepsy).

PubMed

Di Filippo, T; Parisi, L; Roccella, M

2012-02-01

Creativity represents the silent character of human behaviour. In children with epilepsy, cognitive performance of has mainly been investigated under the assumption that the disorder represents a risk factor for the development of intellectual function. In subjects with different forms of epilepsy, neuropsychologic disorders have been detected even when cognitive-global functioning is unimpaired. The cognitive functions of subjects with epilepsy have been widely studied, but their creativity has been never evaluated to date. The aim of this study was to describe the development of creative thinking in a group of children with absence epilepsy. The test battery included: the Torrance Test of Creative Thinking (TTCT), the Wechsler Intelligence Scale for Children-revised (WISC-R) and the Goodenough Human Figure Drawing Test. Statistical analysis (Mann-Whitney test) showed a statistically significant difference (P <0.05) in test scores between two groups of subjects (children with epilesy vs control group), with higher scores for figure originality, figure fluidity and figure elaboration in the control group. There was a significant correlation (Spearman's rho) between verbal IQ and verbal fluidity and verbal flexibility subscale scores and between performance IQ and figure elaboration, between total IQ and verbal fluidity and verbal flexibility subscales (P <0.05; r >0.30). Low scores on the figure originality subscales seem to confirm the hypothesis that adverse psychodynamic and relational factors impoverish autonomy, flexibility and manipulator interests. The communication channels between subjects with epilepsy and their family members were affected by the disorder, as were the type of emotional dynamics and affective flux.

25. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. ELEVATIONS, RIGHT AND LEFT PORTIONS, TEST CELLS 5-12. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

24. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. ELEVATIONS, CENTRAL PORTION AND TEST CELLS 1-4. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

26. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. CROSS-SECTION, CENTRAL PORTION AND TEST CELLS 1-4. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

49 CFR 572.72 - Head assembly and test procedure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... intersection of the head midsagittal plane and the transverse plane which is perpendicular to the Z axis of the... and midsagittal planes passing through this point. (3) Impact the head with the test probe so that at... in the dummy's midsagittal plane. (4) Guide the test probe during impact so that there is no...

Validity and Normative Data for the Biber Figure Learning Test: A Visual Supraspan Memory Measure.

PubMed

Gifford, Katherine A; Liu, Dandan; Neal, Jacquelyn E; Acosta, Lealani Mae Y; Bell, Susan P; Wiggins, Margaret E; Wisniewski, Kristi M; Godfrey, Mary; Logan, Laura A; Hohman, Timothy J; Pechman, Kimberly R; Libon, David J; Blennow, Kaj; Zetterberg, Henrik; Jefferson, Angela L

2018-05-01

The Biber Figure Learning Test (BFLT), a visuospatial serial figure learning test, was evaluated for biological correlates and psychometric properties, and normative data were generated. Nondemented individuals ( n = 332, 73 ± 7, 41% female) from the Vanderbilt Memory & Aging Project completed a comprehensive neuropsychological protocol. Adjusted regression models related BFLT indices to structural brain magnetic resonance imaging and cerebrospinal fluid (CSF) markers of brain health. Regression-based normative data were generated. Lower BFLT performances (Total Learning, Delayed Recall, Recognition) related to smaller medial temporal lobe volumes and higher CSF tau concentrations but not CSF amyloid. BFLT indices were most strongly correlated with other measures of verbal and nonverbal memory and visuospatial skills. The BFLT provides a comprehensive assessment of all aspects of visuospatial learning and memory and is sensitive to biomarkers of unhealthy brain aging. Enhanced normative data enriches the clinical utility of this visual serial figure learning test for use with older adults.

Autonomous Visual Tracking of Stationary Targets Using Small Unmanned Aerial Vehicles

DTIC Science & Technology

2004-06-01

59 Figure 43. Commanded and Actual Yaw Rates during Simulation ..................................60 Figure 44. Setup for Hardware In Loop Simulation...System with AVDS Figure 44. Setup for Hardware In Loop Simulation with AVDS and PerceptiVU 2. Test Conditions Simulations were conducted for the

Comparative Analysis of THOR-NT ATD vs. Hybrid III ATD in Laboratory Vertical Shock Testing

DTIC Science & Technology

2013-09-01

were taken both pretest and post - test for each test event (figure 5). Figure 5. Rigid fixture placed on the drop table with ATD seated: Hybrid III...6 3. Experimental Procedure 6 3.1 Test Setup...frames per second and with a Vision Research Phantom V9.1 (Wayne, NJ) high-speed video camera, sampling 1000 frames per second. 3. Experimental

Three-dimensional visual guidance improves the accuracy of calculating right ventricular volume with two-dimensional echocardiography

NASA Technical Reports Server (NTRS)

Dorosz, Jennifer L.; Bolson, Edward L.; Waiss, Mary S.; Sheehan, Florence H.

2003-01-01

Three-dimensional guidance programs have been shown to increase the reproducibility of 2-dimensional (2D) left ventricular volume calculations, but these systems have not been tested in 2D measurements of the right ventricle. Using magnetic fields to identify the probe location, we developed a new 3-dimensional guidance system that displays the line of intersection, the plane of intersection, and the numeric angle of intersection between the current image plane and previously saved scout views. When used by both an experienced and an inexperienced sonographer, this guidance system increases the accuracy of the 2D right ventricular volume measurements using a monoplane pyramidal model. Furthermore, a reconstruction of the right ventricle, with a computed volume similar to the calculated 2D volume, can be displayed quickly by tracing a few anatomic structures on 2D scans.

Driving Parameters for Distributed and Centralized Air Transportation Architectures

NASA Technical Reports Server (NTRS)

Feron, Eric

2001-01-01

This report considers the problem of intersecting aircraft flows under decentralized conflict avoidance rules. Using an Eulerian standpoint (aircraft flow through a fixed control volume), new air traffic control models and scenarios are defined that enable the study of long-term airspace stability problems. Considering a class of two intersecting aircraft flows, it is shown that airspace stability, defined both in terms of safety and performance, is preserved under decentralized conflict resolution algorithms. Performance bounds are derived for the aircraft flow problem under different maneuver models. Besides analytical approaches, numerical examples are presented to test the theoretical results, as well as to generate some insight about the structure of the traffic flow after resolution. Considering more than two intersecting aircraft flows, simulations indicate that flow stability may not be guaranteed under simple conflict avoidance rules. Finally, a comparison is made with centralized strategies to conflict resolution.

Gendered race: are infants' face preferences guided by intersectionality of sex and race?

PubMed

Kim, Hojin I; Johnson, Kerri L; Johnson, Scott P

2015-01-01

People occupy multiple social categories simultaneously (e.g., a White female), and this complex intersectionality affects fundamental aspects of social perception. Here, we examined the possibility that infant face processing may be susceptible to effects of intersectionality of sex and race. Three- and 10-month-old infants were shown a series of computer-generated face pairs (5 s each) that differed according to sex (Female or Male) or race (Asian, Black, or White). All possible combinations of face pairs were tested, and preferences were recorded with an eye tracker. Infants showed preferences for more feminine faces only when they were White, but we found no evidence that White or Asian faces were preferred even though they are relatively more feminized. These findings challenge the notions that infants' social categories are processed independently of one another and that infants' preferences for sex or race can be explained from mere exposure.

Recent Suicide Attempts Across Multiple Social Identities Among Gay and Bisexual Men: An Intersectionality Analysis.

PubMed

Ferlatte, Olivier; Salway, Travis; Hankivsky, Olena; Trussler, Terry; Oliffe, John L; Marchand, Rick

2017-09-08

This study draws from intersectionality to describe variations in recent suicide attempts (RSA) among gay and bisexual men (GBM) across sociodemographics. Using survey data, logistic regression modeling explored RSA in two analytical stages: (1) the individual effects of each sociodemographic were measured; (2) two-way interaction terms between sociodemographics were tested and added to the models created in stage A. In stage A, only education and income achieved significance. In stage B, the study found that (a) education and income interacted significantly such that the odds of RSA increased for those with a lower income and a lower education; (b) sexual orientation and partnership status interacted, resulting in decreased odds among bisexual men in heterosexual partnerships; and (c) income and education interacted with geography; the effects of these variables were significant only among urban men. These findings suggest that GBM are at unequal risk of RSA according to intersecting sociodemographics.

Gendered race: are infants’ face preferences guided by intersectionality of sex and race?

PubMed Central

Kim, Hojin I.; Johnson, Kerri L.; Johnson, Scott P.

2015-01-01

People occupy multiple social categories simultaneously (e.g., a White female), and this complex intersectionality affects fundamental aspects of social perception. Here, we examined the possibility that infant face processing may be susceptible to effects of intersectionality of sex and race. Three- and 10-month-old infants were shown a series of computer-generated face pairs (5 s each) that differed according to sex (Female or Male) or race (Asian, Black, or White). All possible combinations of face pairs were tested, and preferences were recorded with an eye tracker. Infants showed preferences for more feminine faces only when they were White, but we found no evidence that White or Asian faces were preferred even though they are relatively more feminized. These findings challenge the notions that infants’ social categories are processed independently of one another and that infants’ preferences for sex or race can be explained from mere exposure. PMID:26388823

Urban Middle School Students' Stereotypes at the Intersection of Sexual Orientation, Ethnicity, and Gender.

PubMed

Ghavami, Negin; Peplau, Letitia Anne

2018-05-01

Heterosexual urban middle school students' (N = 1,757) stereotypes about gender typicality, intelligence, and aggression were assessed. Students (M age  = 12.36 years) rated Facebook-like profiles of peers who varied by gender, ethnicity, and sexual orientation. Several hypotheses about how the gender, ethnicity, and sexual orientation of target peers intersect to shape stereotypes were tested. As predicted, a peer's sexual orientation determined stereotypes of gender typicality, with gay and lesbian students viewed as most atypical. As expected, ethnicity shaped stereotypes of intelligence, with Asian American students seen as most intelligent. Gender, ethnicity, and sexual orientation independently and jointly affected stereotypes of aggression. These results demonstrate the value of an intersectional approach to the study of stereotypes. Implications for future research and practice are offered. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Hexavalent Chrome Free Coatings for Electronics Electromagnetic Interference (EMI) Shielding Effectiveness (SE) Interim Test Report

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2015-01-01

Test specimen configuration was provided by Parker Chomerics. The EMI gasket used in this project was Cho-Seal 6503E. Black oxide alloy steel socket head bolts were used to hold the plates together. Non-conductive spacers were used to control the amount of compression on the gaskets. The following test fixture specifications were provided by Parker Chomerics. The CHO-TP09 test plate sets selected for this project consist of two aluminum plates manufactured to the specifications detailed in CHO­-TP09. The first plate, referred to as the test frame, is illustrated in Figure 1. The test frame is designed with a cutout in the center and two alternating bolt patterns. One pattern is used to bolt the test frame to the corresponding test cover plate (Figure 2), forming a test plate set. The second pattern accepts the hardware used to mount the fully assembled test plate set to the main adapter plate (Figure 3).

49 CFR Appendix A to Subpart U of... - Figures

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Figures A Appendix A to Subpart U of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 2re Side Impact Crash Test...

49 CFR Appendix A to Subpart U of... - Figures

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Figures A Appendix A to Subpart U of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 2re Side Impact Crash Test...

49 CFR Appendix A to Subpart U of... - Figures

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Figures A Appendix A to Subpart U of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 2re Side Impact Crash Test...

Interference testing methods of large astronomical mirrors base on lenses and CGH wavefront correctors

NASA Astrophysics Data System (ADS)

Abdulkadyrov, Magomed A.; Belousov, Sergey P.; Patrikeev, Vladimir E.; Semenov, Alexandr P.

2010-07-01

Since last years and at present days LZOS, JSC has been producing a range of primary mirrors of astronomical telescopes with diameter more than 1m under contracts with foreign companies. Simultaneous testing of an aspherical surface figure by means of a lens corrector and CGH (computer generated hologram) corrector, testing of the corrector using the CGH allow challenging the task of definite testing of the mirrors surfaces figure. The results of successful figuring of the mirrors with diameter up to 4m like VISTA Project (Southern European Observatory), TNT (Thai National telescope, Australia - Thailand), LCO telescopes (Las Cumbres Observatory, USA; Russian national projects and meeting these mirrors specifications' requirements are all considered as the sufficient evidence.

Comparing the effects of infrastructure on bicycling injury at intersections and non-intersections using a case–crossover design

PubMed Central

Harris, M Anne; Reynolds, Conor C O; Winters, Meghan; Cripton, Peter A; Shen, Hui; Chipman, Mary L; Cusimano, Michael D; Babul, Shelina; Brubacher, Jeffrey R; Friedman, Steven M; Hunte, Garth; Monro, Melody; Vernich, Lee; Teschke, Kay

2013-01-01

Background This study examined the impact of transportation infrastructure at intersection and non-intersection locations on bicycling injury risk. Methods In Vancouver and Toronto, we studied adult cyclists who were injured and treated at a hospital emergency department. A case–crossover design compared the infrastructure of injury and control sites within each injured bicyclist's route. Intersection injury sites (N=210) were compared to randomly selected intersection control sites (N=272). Non-intersection injury sites (N=478) were compared to randomly selected non-intersection control sites (N=801). Results At intersections, the types of routes meeting and the intersection design influenced safety. Intersections of two local streets (no demarcated traffic lanes) had approximately one-fifth the risk (adjusted OR 0.19, 95% CI 0.05 to 0.66) of intersections of two major streets (more than two traffic lanes). Motor vehicle speeds less than 30 km/h also reduced risk (adjusted OR 0.52, 95% CI 0.29 to 0.92). Traffic circles (small roundabouts) on local streets increased the risk of these otherwise safe intersections (adjusted OR 7.98, 95% CI 1.79 to 35.6). At non-intersection locations, very low risks were found for cycle tracks (bike lanes physically separated from motor vehicle traffic; adjusted OR 0.05, 95% CI 0.01 to 0.59) and local streets with diverters that reduce motor vehicle traffic (adjusted OR 0.04, 95% CI 0.003 to 0.60). Downhill grades increased risks at both intersections and non-intersections. Conclusions These results provide guidance for transportation planners and engineers: at local street intersections, traditional stops are safer than traffic circles, and at non-intersections, cycle tracks alongside major streets and traffic diversion from local streets are safer than no bicycle infrastructure. PMID:23411678

Production of primary mirror segments for the Giant Magellan Telescope

NASA Astrophysics Data System (ADS)

Martin, H. M.; Allen, R. G.; Burge, J. H.; Davis, J. M.; Davison, W. B.; Johns, M.; Kim, D. W.; Kingsley, J. S.; Law, K.; Lutz, R. D.; Strittmatter, P. A.; Su, P.; Tuell, M. T.; West, S. C.; Zhou, P.

2014-07-01

Segment production for the Giant Magellan Telescope is well underway, with the off-axis Segment 1 completed, off-axis Segments 2 and 3 already cast, and mold construction in progress for the casting of Segment 4, the center segment. All equipment and techniques required for segment fabrication and testing have been demonstrated in the manufacture of Segment 1. The equipment includes a 28 m test tower that incorporates four independent measurements of the segment's figure and geometry. The interferometric test uses a large asymmetric null corrector with three elements including a 3.75 m spherical mirror and a computer-generated hologram. For independent verification of the large-scale segment shape, we use a scanning pentaprism test that exploits the natural geometry of the telescope to focus collimated light to a point. The Software Configurable Optical Test System, loosely based on the Hartmann test, measures slope errors to submicroradian accuracy at high resolution over the full aperture. An enhanced laser tracker system guides the figuring through grinding and initial polishing. All measurements agree within the expected uncertainties, including three independent measurements of radius of curvature that agree within 0.3 mm. Segment 1 was polished using a 1.2 m stressed lap for smoothing and large-scale figuring, and a set of smaller passive rigid-conformal laps on an orbital polisher for deterministic small-scale figuring. For the remaining segments, the Mirror Lab is building a smaller, orbital stressed lap to combine the smoothing capability with deterministic figuring.

Reusable Material for Drop Tower

DTIC Science & Technology

2011-08-01

R3 Buna-N Rubber ............................................................................................... 32 B-3. R5 EPDM Rubber ...Butyl Rubber . Figure B-2. R3 Buna-N Rubber . Figure B-3. R5 EPDM Rubber . Figure B-4. R6 Gel Rubber . UNCLASSIFIED 33...11 Current Drop Tower Material & Setup .......................................................... 11 Bowling Ball Rubber Material Sample Test

40 CFR 91.509 - Calculation and reporting of test results.

Code of Federal Regulations, 2011 CFR

2011-07-01

... applicable emission standard expressed to one additional significant figure. (ASTM E29-93a has been... contained in the applicable standard expressed to one additional significant figure. (c) The final... expressed to one additional significant figure. (d) If, at any time during the model year, the CumSum...

40 CFR 91.509 - Calculation and reporting of test results.

Code of Federal Regulations, 2014 CFR

2014-07-01

... applicable emission standard expressed to one additional significant figure. (ASTM E29-93a has been... contained in the applicable standard expressed to one additional significant figure. (c) The final... expressed to one additional significant figure. (d) If, at any time during the model year, the CumSum...

Solid Propellant Test Motor Scaling

DTIC Science & Technology

2001-09-01

50 Figure 40. Comparison of Measured and Calculated Strand and Small Motor Burning Rates for Fundamental Studies of HTPB /AP Smokeless...Propellants...................................... 51 Figure 41. Agreement Between 2x4 Motor and Strand Burning Rate Data for Non-aluminized HTPB /AP...58 Figure 51. Comparison Between Results Obtained with Ultrasonic Method and Standard

Protocol Analysis of Aptitude Differences in Figural Analogy Problem Representation.

ERIC Educational Resources Information Center

Schiano, Diane J.

Individual differences in performance on figural analogy tests are usually attributed to quantitative differences in processing parameters rather than to qualitative differences in the formation and use of representations. Yet aptitude-related differences in categorizing standardized figural analogy problems between high and low scorers have been…

Back-pressure Effect on Shock-Train Location in a Scramjet Engine Isolator

DTIC Science & Technology

2010-03-01

valves .......................................................................................... 57 Side project: making an actuator stand...21 Figure 8. Main manual shut off valve ...................................................................................22 Figure 9 . A small...characteristic about this wind tunnel. With Mach 1.8 nozzle, prior to test runs, the upstream regulator pressure valve (Figure 9 ) was set at

An Empirical Test of Legitimation as a Status Process

ERIC Educational Resources Information Center

Shelly, Ann Converse; Shelly, Robert K.

2011-01-01

Legitimation includes authorization of position occupants by external authority figures or their endorsement by members of task groups. Endorsed authority figures are more likely to direct interaction and influence the actions of group members than authorized authority figures. Interaction dynamics that lead to legitimation in groups are explored…

In Search of Effective Scales for Stream Management: Does Agroecoregion, Watershed, or Their Intersection Best Explain the Variance in Stream Macroinvertebrate Communities?

NASA Astrophysics Data System (ADS)

Dovciak, A. L.; Perry, J. A.

2002-09-01

Our lack of understanding of relationships between stream biotic communities and surrounding landscape conditions makes it difficult to determine the spatial scale at which management practices are best assessed. We investigated these relationships in the Minnesota River Basin, which is divided into major watersheds and agroecoregions which are based on soil type, geologic parent material, landscape slope steepness, and climatic factors affecting crop productivity. We collected macroinvertebrate and stream habitat data from 68 tributaries among three major watersheds and two agroecoregions. We tested the effectiveness of the two landscape classification systems (i.e., watershed, agroecoregion) in explaining variance in habitat and macroinvertebrate metrics, and analyzed the relative influence on macroinvertebrates of local habitat versus regional characteristics. Macroinvertebrate community composition was most strongly influenced by local habitat; the variance in habitat conditions was best explained at the scale of intersection of major watershed and agroecoregion (i.e., stream habitat conditions were most homogeneous within the physical regions of intersection of these two landscape classification systems). Our results are consistent with findings of other authors that most variation in macroinvertebrate community data from large agricultural catchments is attributable to local physical conditions. Our results are the first to test the hypothesis and demonstrate that the scale of intersection best explains these variances. The results suggest that management practices adjusted for both watershed and ecoregion characteristics, with the goal of improving physical habitat characteristics of local streams, may lead to better basin-wide water quality conditions and stream biological integrity.

Northeast Artificial Intelligence Consortium Annual Report for 1987. Volume 7. Parallel, Structural, and Optimal Techniques in Vision

DTIC Science & Technology

1989-03-01

Toys, is a model of the dinosaur Tyrannosaurus Rex . This particular test case is characterized by sharply discontinuous depths varying over a wide...are not shown in these figures). 7B-C-13 Figure 7: T. Rex Scene - Figure 8: T. Rex Scene - Left Image of Tinker Right Image Toy Object (j 1/’.) C...8217: Figure 9: T. Rex Scene - Figure 10: T. Rex Scene - Connected Contours Extracted Connected Contours Extracted from Left Image from Right Image 7B-C-14 400

49 CFR Appendix - Figures to Subpart I of Part 572

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Figures to Subpart I of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 6-Year-Old Child Performance test conditions. Pt. 572, Subpt. I, Figs....

49 CFR Appendix - Figures to Subpart I of Part 572

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Figures to Subpart I of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 6-Year-Old Child Performance test conditions. Pt. 572, Subpt. I, Figs....

49 CFR Appendix - Figures to Subpart I of Part 572

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Figures to Subpart I of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 6-Year-Old Child Performance test conditions. Pt. 572, Subpt. I, Figs....

Single Common Powertrain Lubricant Development

DTIC Science & Technology

2012-01-01

2 2.2 ENGINE DURABILITY TESTING...Page Figure 1 – General Engine Products 6.5L(T) Test Cell Installation ............................................... 9 Figure 2 ... 2 Run 3 Repeatability Run - 1 Repeatability Run - 2 Repeatability Run - 3 3-Run Average Engine Oil Consumption [lb/hr] 0.061 0.082 0.086 0.076

Allen figure and broken wheel visual acuity measurement in preschool children.

PubMed

Schmidt, P P

1992-02-01

In a masked investigation, 34 preschool children (n = 34, 19 females and 15 males) between the ages of 3 and 5 years (mean age = 4.1 years) enrolled in Project Headstart had their monocular and binocular visual acuity measured using the Broken Wheel and Allen figure methods. The results showed that 1) a greater range in acuity values was found with the Allen figure than Broken Wheel test, despite the identical Snellen equivalent acuity levels and similar probability of guessing criteria used for both Broken Wheel and Allen figure acuity measurement e.g., no strong statistical correlation (rOD = +0.22, rOS = -0.11 and rOU = +0.04; rho OD = +0.22, rho OS = -0.11, rho OU = 0.00) for the two tests was found; and 2) the Broken Wheel test appeared to discriminate between 20/30 and 20/40 acuity performance more consistently than did Allen figure and in a way not attributable to chance (p less than or equal to 0.003). In a separate evaluation, the Broken Wheel test showed consistency in the acuity measured. Broken Wheel acuity measurement, even with an average variation of +/- 5.6 percent from the corresponding Snellen standard, appears to be a valuable clinical tool to measure acuity in young children.

Rey Figure Test with recognition trial: normative data for Lebanese adults.

PubMed

Darwish, Hala; Zeinoun, Pia; Farran, Natali; Fares, Souha

2018-06-12

This study aimed to provide normative data for four trials of the Rey figure Test - a complex design used to assess visuoconstructional abilities, aspects of visual memory, and aspects of executive functioning. Despite its frequent clinical and research use in the Arab region, published studies regarding the measures' adaptation or normative data remain absent. We administered the Rey figure on a convenience sample of Lebanese (n = 254) aged 30 years to 99. We examined the impact of relevant demographics, and found that age, gender, and years of education impacted scores, and norms were derived based on these variables. Such normative data for the Rey figure enhance its practicality and psychometric adequacy for use in research and clinical settings in Lebanon.

Driving under low-contrast visibility conditions in Parkinson disease

PubMed Central

Uc, E Y.; Rizzo, M; Anderson, S W.; Dastrup, E; Sparks, J D.; Dawson, J D.

2009-01-01

Objective: To assess driving performance in Parkinson disease (PD) under low-contrast visibility conditions. Methods: Licensed, active drivers with mild to moderate PD (n = 67, aged 66.2 ± 9.0 years, median Hoehn–Yahr stage = 2) and controls (n = 51, aged 64.0 ± 7.2 years) drove in a driving simulator under high- (clear sky) and low-contrast visibility (fog) conditions, leading up to an intersection where an incurring vehicle posed a crash risk in fog. Results: Drivers with PD had higher SD of lateral position (SDLP) and lane violation counts (LVC) than controls during fog (p < 0.001). Transition from high- to low-contrast visibility condition increased SDLP and LVC more in PD than in controls (p < 0.01). A larger proportion of drivers with PD crashed at the intersection in fog (76.1% vs 37.3%, p < 0.0001). The time to first reaction in response to incursion was longer in drivers with PD compared with controls (median 2.5 vs 2.0 seconds, p < 0.0001). Within the PD group, the strongest predictors of poor driving outcomes under low-contrast visibility conditions were worse scores on measures of visual processing speed and attention, motion perception, contrast sensitivity, visuospatial construction, motor speed, and activities of daily living score. Conclusions: During driving simulation under low-contrast visibility conditions, drivers with Parkinson disease (PD) had poorer vehicle control and were at higher risk for crashes, which were primarily predicted by decreased visual perception and cognition; motor dysfunction also contributed. Our results suggest that drivers with PD may be at risk for unsafe driving in low-contrast visibility conditions such as during fog or twilight. GLOSSARY ADL = activities of daily living; CFT = Complex Figure Test; CS = contrast sensitivity; FOV = field of view; FR = functional reach; FVA = far visual acuity; JLO = judgment of line orientation; LVC = lane violation counts; PD = Parkinson disease; SDLP = SD of lateral position; SFM = structure from motion; SIREN = Simulator for Interdisciplinary Research in Ergonomics and Neuroscience; TFR = time to first reaction; UFOV = useful field of view; UPDRS = Unified Parkinson’s Disease Rating Scale. PMID:19805726

The homogeneity effect on figure/ground perception in infancy.

PubMed

Takashima, Midori; Kanazawa, So; Yamaguchi, Masami K; Shiina, Ken

2014-02-01

We examined whether the homogeneity of the two profiles of Rubin's goblet affects figure/ground perception in infants. We modified the two profiles of Rubin's goblet in order to compare figure/ground perception under four test patterns: (1) two profiles painted with horizontal lines (horizontal-line condition), (2) two profiles painted middle gray (uni-color condition), (3) one profile painted light gray and the other dark gray (two-color condition), and (4) a goblet painted with concentric circles (concentric-circles condition). In the horizontal-line condition the homogeneity of the profile was strengthened, and in the two-color condition the homogeneity of the profile was weakened compared to the uni-color condition, which was an original Rubin's goblet. In the concentric-circles condition the homogeneity of the reversed areas of the horizontal-line were strengthened. After infants were familiarized with each Rubin's goblet, the infants were tested on their discrimination between the two profiles and the goblet in the post-familiarization test. In horizontal-line condition, uni-color condition and concentric-circles condition infants showed a novelty preference for the two profiles in the post-familiarization test. On the other hand, in the two-color condition no preference was observed in the post-familiarization test. This means that infants perceived the goblet as figure and the two profiles as ground in the horizontal-line condition, the uni-color condition and the concentric-circles condition. We found that infants could not perceive the goblet area as figure when the homogeneity of the two profiles was weakened. It can be said that figure/ground perception in infancy is not affected by strengthened homogeneity, but is affected by weakened homogeneity. Copyright © 2014 Elsevier Inc. All rights reserved.

Psychological and Physiological Processes in Figure-Tracing Abilities Measured Using a Tablet Computer: A Study with 7 and 9 Years Old Children

PubMed Central

Giammarco, Enrico; Di Sano, Sergio; Aureli, Tiziana; Cerratti, Paola; Fanò-Illic, Giorgio; Pietrangelo, Tiziana

2016-01-01

The present study investigated the use of a tablet computer to assess figure-tracing skills and their relationships with psychological (visual–perceptual processes, cognitive processes, handwriting skills) and physiological (body mass index, isometric strength of arms) parameters with school-children of second (7–8-year-olds) and fourth (9–10-year-olds) grades. We were also interested in gender differences. The task required tracing of geometric figures on a template, shown on a tablet screen in light gray, for the segments that make up the target figure, one at a time. This figure-tracing tablet test allows acquisition and automated analysis of four parameters: number of strokes (pen lift) for each segment; oscillations of lines drawn with respect to reference lines; pressure of pen on tablet; and average speed of tracing. The results show a trade-off between speed and quality for the tablet parameters, with higher speed associated with more oscillations with respect to the reference lines, and lower number of strokes for each segment, in both male and female children. The involvement of visual–motor integration on the ability to reduce the oscillations in this tablet test was only seen for the male children, while both the male and female children showed a relationship between oscillations and more general/abstract visual–spatial processes. These data confirm the role of visual–motor processes in this figure-tracing tablet test only for male children, while more general visual–spatial processes influence the performance in the tablet test for both sexes. We conclude that the test proposed is useful to screen for grapho-motor difficulties. PMID:27803678

21. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. SECOND FLOOR PLAN, RIGHT AND LEFT END PORTIONS, TEST CELLS 5-12. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

18. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. FIRST FLOOR PLAN, CENTRAL PORTION AND TEST CELLS 1-4. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

27. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. CROSS-SECTION, RIGHT AND LEFT END PORTIONS, TEST CELLS 5-12. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

22. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. THIRD FLOOR AND ROOF PLAN, CENTRAL PORTION AND TEST CELLS 1-4. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

16. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. BASEMENT FLOOR PLAN, CENTRAL PORTION AND TEST CELLS 1-4. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

17. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. BASEMENT FLOOR PLAN, RIGHT AND LEFT END PORTIONS, TEST CELLS 5-12. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

20. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. SECOND FLOOR PLAN, CENTRAL PORTION AND TEST CELLS 1-4. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

19. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. FIRST FLOOR PLAN, RIGHT AND LEFT END PORTIONS, TEST CELLS 5-12. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

40 CFR Figure C-1 to Subpart C of... - Suggested Format for Reporting Test Results for Methods for SO 2, CO, O 3, NO 2

Code of Federal Regulations, 2013 CFR

2013-07-01

... Results for Methods for SO 2, CO, O 3, NO 2 C Figure C-1 to Subpart C of Part 53 Protection of Environment... Pt. 53, Subpt. C, Fig. C-1 Figure C-1 to Subpart C of Part 53—Suggested Format for Reporting Test... Difference Table C-1 spec. Pass or fail Low 1 ____ pPM 2 to ____ pPM 3 4 5 6 Medium 1 ____ pPM 2 to ____ pPM...

16 CFR Figure 1 to Part 1513 - Wedge Block for Tests in § 1513.4 (a), (b), and (c)

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Wedge Block for Tests in § 1513.4 (a), (b), and (c) 1 Figure 1 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL... Block for Tests in § 1513.4 (a), (b), and (c) ER22DE99.002 ...

Surface Wave Detection and Measurement Using a One Degree Global Dispersion Grid

DTIC Science & Technology

2006-05-01

explosions at all major test sites .................................................................... 21 List of Figures (continued) Figure 17 Page...surface - . 7 " wave phase and group velocity dispersion curves from underground nuclear test sites (Stevens, 1986; Stevens and McLaughlin, 19881...calculated from earth models for 270 paths ( test site - station combinations) at 10 frequencies between 0.01 5 and 0.06 Hz; phase and group velocity

Automatic Scoring of Paper-and-Pencil Figural Responses. Research Report.

ERIC Educational Resources Information Center

Martinez, Michael E.; And Others

Large-scale testing is dominated by the multiple-choice question format. Widespread use of the format is due, in part, to the ease with which multiple-choice items can be scored automatically. This paper examines automatic scoring procedures for an alternative item type: figural response. Figural response items call for the completion or…

Meteorological Instrumentation Support for an Adverse Weather Test Facility

DTIC Science & Technology

1991-05-01

pressure sensor 12 8 Sling psychrometer 12 9 Relative humidity graph 13 10 Relative humidity graph 13 FIGURES (cont) Page 11 Cooled mirror dewpoint...80 -80 -50 -50 -32 .32 WET BULB DRY BULB Figure 8. Sling psychrometer 12 40 -. w 0 ARYBULAI TEMPERATURE Figure 1. Relative humidity graph 3013 L

Creating a Network Model for the Integration of a Dynamic and Static Supervisory Control and Data Acquisition (SCADA) Test Environment

DTIC Science & Technology

2011-03-01

they can continue to leverage these capabilities (building Smart Grid infrastructure and providing Internet connectivity to every home ) while ensuring...21  Figure 9. Smart Grid Interoperability .............................................................................. 22  Figure 10. Smart ...Grid Integration .................................................................................... 24  Figure 11. National Smart Grid Initiatives

49 CFR Appendix A to Subpart V of... - Figures

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Figures A Appendix A to Subpart V of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY... Test Dummy, Small Adult Female Pt. 572, Subpt. V, App. A Appendix A to Subpart V of Part 572—Figures...

49 CFR Appendix A to Subpart V of... - Figures

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Figures A Appendix A to Subpart V of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY... Test Dummy, Small Adult Female Pt. 572, Subpt. V, App. A Appendix A to Subpart V of Part 572—Figures...

Applications of mental rotation figures of the Shepard and Metzler type and description of a mental rotation stimulus library.

PubMed

Peters, Michael; Battista, Christian

2008-04-01

The 3D cube figures used by Shepard and Metzler [Shepard, R. N., & Metzler, J. (1971). Mental rotation of three-dimensional objects. Science, 171, 701-703] have been applied in a broad range of studies on mental rotation. This note provides a brief background on these figures, their general use in cognitive psychology and their role in studying spatial behavior. In particular, it is pointed out that large sex differences with the 3D mental rotation figures tend to be observed only in particular tasks, such as the Vandenberg and Kuse test [Vandenberg, S. G., & Kuse, A. R. (1978). Mental rotations, a group test of three-dimensional spatial visualization. Perceptual and Motor Skills, 47, 599-604] that involve multiple figures within a single problem. In contrast, pairwise presentation of the same 3D figures yields either small or no significant sex differences. In the context of the very broad range of ongoing research done with 3D figures, and the desirability of uniformity in the stimulus material used, we introduce a library of 16 cube mental rotation figures, each presented in orientations ranging from 0 to 360 degr in 5 degr steps, and with its mirror image, for a total of 2336 figures. This library, freely available to researchers, will help in the creation of mental rotation tasks both for presentation on the computer screen and for pencil and paper applications.

Overview of Common Sleep Disorders and Intersection with Dermatologic Conditions.

PubMed

Walia, Harneet K; Mehra, Reena

2016-04-30

Sleep disorders are very common, often under-recognized and therefore undertreated, are associated with a myriad of medical conditions and could lead to significant impairment of quality of life. This review provides an up-to-date synopsis of common sleep disorders encompassing insufficient sleep syndrome, insomnia, circadian rhythm disorders and obstructive sleep apnea with a brief overview of epidemiology, screening, diagnostic testing and treatment. We also emphasize the emerging area of the intersection of sleep disorders and dermatologic conditions and present compelling data regarding underlying mechanisms including sleep dysfunction in relation to disorders of skin inflammation, aging and skin cancer.

Thermal stability tests of CFRP sandwich panels for far infrared astronomy

NASA Technical Reports Server (NTRS)

Hoffmann, W. F.; Helwig, G.; Scheulen, D.

1986-01-01

An account is given of fabrication methods and low temperature figure tests for CFRP sandwich panels, in order to ascertain their applicability to ultralightweight 3-m aperture primary mirrors for balloon-borne sub-mm and far-IF telescopes that must maintain a 1-2 micron rms surface figure accuracy at -40 to -50 C. Optical figure measurements on the first two of a series of four 0.5-m test panels, replicated to a spherical surface, show a radius-of-curvature change and astigmatism down to -60 C; this approximately follows the composite's theoretical predictions and implies that material and process control is excellent, so that the large scale changes observed can be compensated for.

Testing an Alternative Method for Estimating the Length of Fungal Hyphae Using Photomicrography and Image Processing.

PubMed

Shen, Qinhua; Kirschbaum, Miko U F; Hedley, Mike J; Camps Arbestain, Marta

2016-01-01

This study aimed to develop and test an unbiased and rapid methodology to estimate the length of external arbuscular mycorrhizal fungal (AMF) hyphae in soil. The traditional visual gridline intersection (VGI) method, which consists in a direct visual examination of the intersections of hyphae with gridlines on a microscope eyepiece after aqueous extraction, membrane-filtration, and staining (e.g., with trypan blue), was refined. For this, (i) images of the stained hyphae were taken by using a digital photomicrography technique to avoid the use of the microscope and the method was referred to as "digital gridline intersection" (DGI) method; and (ii), the images taken in (i) were processed and the hyphal length was measured by using ImageJ software, referred to as the "photomicrography-ImageJ processing" (PIP) method. The DGI and PIP methods were tested using known grade lengths of possum fur. Then they were applied to measure the hyphal lengths in soils with contrasting phosphorus (P) fertility status. Linear regressions were obtained between the known lengths (Lknown) of possum fur and the values determined by using either the DGI (LDGI) (LDGI = 0.37 + 0.97 × Lknown, r2 = 0.86) or PIP (LPIP) methods (LPIP = 0.33 + 1.01 × Lknown, r2 = 0.98). There were no significant (P > 0.05) differences between the LDGI and LPIP values. While both methods provided accurate estimation (slope of regression being 1.0), the PIP method was more precise, as reflected by a higher value of r2 and lower coefficients of variation. The average hyphal lengths (6.5-19.4 m g-1) obtained by the use of these methods were in the range of those typically reported in the literature (3-30 m g-1). Roots growing in P-deficient soil developed 2.5 times as many hyphae as roots growing in P-rich soil (17.4 vs 7.2 m g-1). These tests confirmed that the use of digital photomicrography in conjunction with either the grid-line intersection principle or image processing is a suitable method for the measurement of AMF hyphal lengths in soils for comparative investigations.

RHODES-ITMS Tempe field test project : implementation and field testing of RHODES, a real-time traffic adaptive control system

DOT National Transportation Integrated Search

2001-09-01

RHODES is a traffic-adaptive signal control system that optimally controls the traffic that is observed in real time. The RHODES-ITMS Program is the application of the RHODES strategy for the two intersections of a freeway-arterial diamond interchang...

Test track and driving simulator evaluations of warnings to prevent right-angle crashes at signalized intersections

DOT National Transportation Integrated Search

2008-10-01

Two experiments (simulator and test track) were conducted to validate the concept of a system designed to warn potential victims of a likely red-light violator. The warning system uses sensors to detect vehicles that are unlikely to stop at red traff...

Crash rates at intersections.

DOT National Transportation Integrated Search

2003-08-01

The objective of this study were to develop a database of intersections, match traffic crashes to these intersections, calculate rates for intersections, and identify intersections with the highest crash rates. A procedure was used to: a) identify in...

Characteristics of grouping colors for figure segregation on a multicolored background.

PubMed

Nagai, Takehiro; Uchikawa, Keiji

2008-11-01

A figure is segregated from its background when the colored elements belonging to the figure are grouped together. We investigated the range of color distribution conditions in which a figure could be segregated from its background using the color distribution differences. The stimulus was a multicolored texture composed of randomly shaped pieces. It was divided into two regions: a test region and a background region. The pieces in these two regions had different color distributions in the OSA Uniform Color Space. In our experiments, the subject segregated the figure of the test region using two different procedures. Since the Euclidean distance in the OSA Uniform Color Space corresponds to perceived color difference, if segregation thresholds are determined by only color difference, the thresholds should be independent of position and direction in the color space. In the results, however, the thresholds did depend on position and direction in the OSA Uniform Color Space. This suggests that color difference is not the only factor in figure segregation by color. Moreover, the threshold dependence on position and direction is influenced by the distances in the cone-opponent space whose axes are normalized by discrimination thresholds, suggesting that figure segregation threshold is determined by similar factors in the cone-opponent space for color discrimination. The analysis of the results by categorical color naming suggests that categorical color perception may affect figure segregation only slightly.

Laboratory and Field Evaluation of In-Place Asphalt Recycling Technologies for Small Airfield Repair

DTIC Science & Technology

2013-06-01

Mariely Mejías-Santiago and William D. Carruth Geotechnical and Structures Laboratory US Army Engineer Research and Development Center 3909 Halls...24. Pavement structure at Test Site 1. ....................................................................................... 28  Figure 25. Pavement... structure at ERDC test site. ................................................................................ 30  Figure 26. Heatwurx HWX-30 electric

Psychobiological Assessment and Enhancement of Team Cohesion and Psychological Resilience in ROTC Cadets Using a Virtual-Reality Team Cohesion Test

DTIC Science & Technology

2016-06-01

including empathy , personality, and IQ questionnaires, are correlated with either the UAV (see Figure 5) or subarctic survival task (see Figure 6...Measure of five factor model of personality, IRI (Interpersonal Reactivity Index): empathy test, AMNART (American version of the National Adult Reading

Relational Reasoning in Word and in Figure

ERIC Educational Resources Information Center

Alexander, Patricia A.; Singer, Lauren M.; Jablansky, Sophie; Hattan, Courtney

2016-01-01

This study investigated the relational reasoning capabilities of older adolescents and young adults when the focal assessment was a verbal and more schooled measure than 1 that was figural and more novel in its configuration. To achieve this end, the verbal test of relational reasoning (vTORR) was constructed to parallel the test of relational…

Embedded Figures Test Performance in the Broader Autism Phenotype: A Meta-Analysis

ERIC Educational Resources Information Center

Cribb, Serena J.; Olaithe, Michelle; Di Lorenzo, Renata; Dunlop, Patrick D.; Maybery, Murray T.

2016-01-01

People with autism show superior performance to controls on the Embedded Figures Test (EFT). However, studies examining the relationship between autistic-like traits and EFT performance in neurotypical individuals have yielded inconsistent findings. To examine the inconsistency, a meta-analysis was conducted of studies that (a) compared high and…

16 CFR 1501.4 - Size requirements and test procedure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... part 1501 shall be small enough to fit entirely within a cylinder with the dimensions shown in Figure 1... compliance with this regulation, the dimensions of the Commission's test cylinder will be no greater than those shown in Figure 1. (In addition, for compliance purposes, the English dimensions shall be used...

16 CFR 1501.4 - Size requirements and test procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... part 1501 shall be small enough to fit entirely within a cylinder with the dimensions shown in Figure 1... compliance with this regulation, the dimensions of the Commission's test cylinder will be no greater than those shown in Figure 1. (In addition, for compliance purposes, the English dimensions shall be used...

16 CFR 1501.4 - Size requirements and test procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... part 1501 shall be small enough to fit entirely within a cylinder with the dimensions shown in Figure 1... compliance with this regulation, the dimensions of the Commission's test cylinder will be no greater than those shown in Figure 1. (In addition, for compliance purposes, the English dimensions shall be used...

BURNER RIG TESTING OF A500 C/SiC

DTIC Science & Technology

2018-03-17

test program characterized the durability behavior of A500® C/SiC ceramic matrix composite material at room and elevated temperature . Specimens were...7 Figure 6. Typical Room- Temperature Tensile Stress-Versus-Strain Trace for As-Manufactured A500...Operation ......................................... 18 Figure 17. Example of the Burner Rig Temperature Profiles Used

Evaluation of the Impact of Kerojet (trademark) Aquarius Water Scavenger Additive on the Thermal Stability of Jet A Fuels

DTIC Science & Technology

2014-12-01

113 Figure 64 - Elemental Analysis, Typical TMS Post - Test , Post Carbon Burn-off, Hexane rinsed ............ 114 Figure 65 – SEM (20X...Agency’s Wright-Patterson Aerospace Fuels Laboratory AFRL Air Force Research Laboratory AFTSTU Aviation Fuel Thermal Stability Test Unit ARSFSS Advanced...Approved for public release; distribution unlimited. For all ARSFSS testing , SV hysteresis is measure pre- and post - test and is defined by relating

Thread gauge for tapered threads

DOEpatents

Brewster, A.L.

1994-01-11

The thread gauge permits the user to determine the pitch diameter of tapered threads at the intersection of the pitch cone and the end face of the object being measured. A pair of opposed anvils having lines of threads which match the configuration and taper of the threads on the part being measured are brought into meshing engagement with the threads on opposite sides of the part. The anvils are located linearly into their proper positions by stop fingers on the anvils that are brought into abutting engagement with the end face of the part. This places predetermined reference points of the pitch cone of the thread anvils in registration with corresponding points on the end face of the part being measured, resulting in an accurate determination of the pitch diameter at that location. The thread anvils can be arranged for measuring either internal or external threads. 13 figures.

16 CFR Figure 1 to Part 1213 - Wedge Block for Tests in § 1213.4(a), (b), and (c)

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Wedge Block for Tests in § 1213.4(a), (b), and (c) 1 Figure 1 to Part 1213 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER... 1 to Part 1213—Wedge Block for Tests in § 1213.4(a), (b), and (c) ER22DE99.007 ...

Corrosion Induced Loss of Capacity of Post Tensioned Seven Wire Strand Cable Used in Multistrand Anchor Systems Installed at Corps Projects

DTIC Science & Technology

2016-12-01

Universal Test Machine. .................. 7 Figure 2.2. Pull-test results of PT seven-wire strand cable surrounded by a quickset, steel - reinforced epoxy...13 Figure 2.7. Pull-test results of PT seven-wire strand cable surrounded by a quickset, steel - reinforced...surrounded by a thick layer of quickset, steel -reinforced epoxy and with 40% reduced wedges. ....................................................... 15

Feedback enhances feedforward figure-ground segmentation by changing firing mode.

PubMed

Supèr, Hans; Romeo, August

2011-01-01

In the visual cortex, feedback projections are conjectured to be crucial in figure-ground segregation. However, the precise function of feedback herein is unclear. Here we tested a hypothetical model of reentrant feedback. We used a previous developed 2-layered feedforward spiking network that is able to segregate figure from ground and included feedback connections. Our computer model data show that without feedback, neurons respond with regular low-frequency (∼9 Hz) bursting to a figure-ground stimulus. After including feedback the firing pattern changed into a regular (tonic) spiking pattern. In this state, we found an extra enhancement of figure responses and a further suppression of background responses resulting in a stronger figure-ground signal. Such push-pull effect was confirmed by comparing the figure-ground responses with the responses to a homogenous texture. We propose that feedback controls figure-ground segregation by influencing the neural firing patterns of feedforward projecting neurons.

Unique Stealth Unmanned Aerial Vehicle (UAV) Houck Aircraft Design Program. Volume 2: Prototype Report

DTIC Science & Technology

2008-11-01

Configuration ................................ 23 Figure 18: Wake at 15 MPH for AOA = 6, 20 degrees...27 Figure 19: Wake at 35 MPH for AOA = 6, 20 degrees ............................................................... 28 Figure 20: Wake ...several different manners beginning with alpha (angle of attack) sweeps, then Q (velocity) sweeps, and finally randomized testing. Solid and wake

Multi-Agent Framework for the Fair Division of Resources and Tasks

DTIC Science & Technology

2006-01-01

144 B.1.2 Application of Shake Out Algorithm to JFK Airport Test Data.........................144 B.2 Generalization...145 Figure B–2: Available Aircraft Inventory at JFK Airport ............................................. 148 Figure B–3...Available Aircraft Inventory at JFK Airport after the first shake out ....... 148 Figure B–4: Inventory Vectors for Second and Third Shake Outs

Modeling, Simulation, and Flight Test for Automatic Flight Control of the Condor Hybrid-Electric Remote Piloted Aircraft

DTIC Science & Technology

2012-03-01

comprehensive explanations (Yechout, 2003), (Nelson, 1998). Figure 9: USAFA/Brandt Jet5 Aircraft Modeling Program 18 2.5.1 Dynamic Aircraft...16 2.5.1 Dynamic Aircraft Stability Modes .......................................................... 18 2.5.2 State...12 Figure 7: Body-Fixed Reference Frame ........................................................................... 13 Figure 8: Static and Dynamic

Hydraulic Performance of Conflict Manholes

DOT National Transportation Integrated Search

1999-11-01

This report details a performance analysis of conflict junction boxes, employed when stormwater lines intersect utility conduits. A variety of configurations currently used by FDOT were tested and rated for turbulent loss characteristics. Special con...

Orientation dependence of the stress rupture properties of Nickel-base superalloy single crystals

NASA Technical Reports Server (NTRS)

Mackay, R. A.

1981-01-01

The influence of orientation of the stress rupture behavior of Mar-M247 single crystals was studied. Stress rupture tests were performed at 724 MPa and 774 C where the effect of anisotropy is prominent. The mechanical behavior of the single crystals was rationalized on the basis of the Schmid factors for the operative slip systems and the lattice rotations which the crystals underwent during deformation. The stress rupture lives were found to be greatly influenced by the lattice rotations required to produce intersecting slip, because steady-state creep does not begin until after the onset of intersecting slip. Crystals which required large rotations to become oriented for intersecting slip exhibited a large primary creep strain, a large effective stress level at the onset of steady-state creep, and consequently a short stress rupture life. A unified analysis was attained for the stress rupture behavior of the Mar-M247 single crystals tested in this study at 774 C and that of the Mar-M200 single crystals tested in a prior study at 760 C. In this analysis, the standard 001-011-111 stereographic triangle was divided into several regions of crystallographic orientation which were rank ordered according to stress rupture life for this temperature regime. This plot indicates that those crystals having orientations within about 25 deg of the 001 exhibited significantly longer lives when their orientations were closer to the 001-011 boundary of the stereographic triangle than to the 001-111 boundary.

Using Readiness Tests To Route Kindergarten Students: The Snarled Intersection of Psychometrics, Policy, and Practice.

ERIC Educational Resources Information Center

Ellwein, Mary Catherine; And Others

The validity of inferences drawn from readiness tests used to place children in a regular or a 2-year kindergarten program was investigated. Data from nine school districts in Virginia were used in the study. The study explored technical characteristics of four commonly used readiness tests: the Brigance Kindergarten and First Grade Screen, the…

23. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. THIRD FLOOR AND ROOF PLAN, RIGHT AND LEFT END PORTIONS, TEST CELLS 5-12. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

A Generic analytical solution for modelling pumping tests in wells intersecting fractures

NASA Astrophysics Data System (ADS)

Dewandel, Benoît; Lanini, Sandra; Lachassagne, Patrick; Maréchal, Jean-Christophe

2018-04-01

The behaviour of transient flow due to pumping in fractured rocks has been studied for at least the past 80 years. Analytical solutions were proposed for solving the issue of a well intersecting and pumping from one vertical, horizontal or inclined fracture in homogeneous aquifers, but their domain of application-even if covering various fracture geometries-was restricted to isotropic or anisotropic aquifers, whose potential boundaries had to be parallel or orthogonal to the fracture direction. The issue thus remains unsolved for many field cases. For example, a well intersecting and pumping a fracture in a multilayer or a dual-porosity aquifer, where intersected fractures are not necessarily parallel or orthogonal to aquifer boundaries, where several fractures with various orientations intersect the well, or the effect of pumping not only in fractures, but also in the aquifer through the screened interval of the well. Using a mathematical demonstration, we show that integrating the well-known Theis analytical solution (Theis, 1935) along the fracture axis is identical to the equally well-known analytical solution of Gringarten et al. (1974) for a uniform-flux fracture fully penetrating a homogeneous aquifer. This result implies that any existing line- or point-source solution can be used for implementing one or more discrete fractures that are intersected by the well. Several theoretical examples are presented and discussed: a single vertical fracture in a dual-porosity aquifer or in a multi-layer system (with a partially intersecting fracture); one and two inclined fractures in a leaky-aquifer system with pumping either only from the fracture(s), or also from the aquifer between fracture(s) in the screened interval of the well. For the cases with several pumping sources, analytical solutions of flowrate contribution from each individual source (fractures and well) are presented, and the drawdown behaviour according to the length of the pumped screened interval of the well is discussed. Other advantages of this proposed generic analytical solution are also given. The application of this solution to field data should provide additional field information on fracture geometry, as well as identifying the connectivity between the pumped fractures and other aquifers.

Comparison of the 1.5 Mile Run Times at 7,200 Feet and Simulated 850 Feet in a Hyperoxic Room

DTIC Science & Technology

2012-03-01

Maximal Oxygen Update ( VO2 max) Test ......................................... 7 Figure 3 - VO2 Max results for Male, Female and All Subjects. * p...0.001 between Male and Female VO2 ’s. ............................................................. 11 Figure 4 - VO2 Max vs Predicted VO2 Max at 850...and 7,200 Feet ................. 12 Figure 5 - Actual VO2 Max vs Predicted VO2 Max at ALT (7,200 Feet) ....... 13 Figure 6 - VO2 Max vs Predicted

The Utility of fMRI for Assessing and Predicting Individual Differences in Fatigue Vulnerability

DTIC Science & Technology

2010-06-15

field of view (FOV) = 25.6 cm, image matrix = 256 x 256. Next, a set of T1-weighted axial low -resolution anatomical images encompassing the whole...wide range of central nervous system disorders and medication effects ( Lowe & Rabbitt, 1998; Randall, Fleck, Shneerson & File, 2004). These tests are...fusiform gyrus (Figure 5E); 6) Brodmann area 19 (Figure 5F); and 7) the entire cerebellum (Figure 5G ). Figure 5. Axial (top row) and sagittal

Impulse Flashover Tests at Edgar Beauchamp High Voltage Test Facility, Dixon, California, in Support of Cutler Insulator Failure Investigation

DTIC Science & Technology

2006-07-01

sites. The strength member of the safety core insulators is a fiberglass belt wrapped around pins in the end fittings. Porcelain tubes cover the belt... porcelain tube and heavily tracked the fiberglass belt but left the belt intact structurally (Figure 1). Figure 1. Cutler safety core insulator ...fail-safe insulators . For these tests, the porcelain tube of the safety core insulator was replaced with a plastic see-through tube. The test report [5

Effects of orientation on Rey complex figure performance.

PubMed

Ferraro, F Richard; Grossman, Jennifer; Bren, Amy; Hoverson, Allysa

2002-10-01

An experiment was performed that examined the impact of stimulus orientation on performance on the Rey complex figure. A total of 48 undergraduates (24 men, 24 women) were randomly assigned to one of four Rey figure orientation groups (0 degrees, 90 degrees, 180 degrees, and 270 degrees ). Participants followed standard procedures for the Rey figure, initially copying it in whatever orientation group they were assigned to. Next, all participants performed a 15-20 min lexical decision experiment, used as a filler task. Finally, and unbeknownest to them, participants were asked to recall as much of the figure as they could. As expected, results revealed a main effect of Task (F = 83.92, p < .01), in which copy performance was superior to recall performance. However, the main effect for orientation was not significant, nor did orientation interact with task (Fs < .68, ps > .57). The results are important from an applied setting, especially if testing conditions are less than optimal and a fixed stimulus position is not possible (e.g., testing at the bedside).

Drivers' decision-making when attempting to cross an intersection results from choice between affordances

PubMed Central

Marti, Geoffrey; Morice, Antoine H. P.; Montagne, Gilles

2015-01-01

In theory, a safe approach to an intersection implies that drivers can simultaneously manage two scenarios: they either choose to cross or to give way to an oncoming vehicle. In this article we formalize the critical time for safe crossing (CTcross) and the critical time for safe stopping (CTstop) to represent crossing and stopping possibilities, respectively. We describe these critical times in terms of affordances and empirically test their respective contribution to the driver's decision-making process. Using a driving simulator, three groups of participants drove cars with identical acceleration capabilities and different braking capabilities. They were asked to try to cross an intersection where there was an oncoming vehicle, if they deemed the maneuver to be safe. If not, they could decide to stop or, as a last resort, make an emergency exit. The intersections were identical among groups. Results showed that although the crossing possibilities (CTcross) were the same for all groups, there were between-group differences in crossing frequency. This suggests that stopping possibilities (CTstop) play a role in the driver's decision-making process, in addition to the crossing possibilities. These results can be accounted for by a behavioral model of decision making, and provide support for the hypothesis of choice between affordances. PMID:25620922

Advanced Propulsion for Gun Launched Projectiles and Missiles: Phase 1 - Low Cost Flight Test Platform Development

DTIC Science & Technology

2009-11-30

Son blueberry fields as shown in Figure 113. All FAA and Maine DOT permits were acquired. Richard Willey was the designated LSO (Launch Safety...The launch area is on the Jasper Wyman & Son blueberry fields as shown in Figure 113. FAA and Maine DOT permits are required for flight testing

Brief Report: Eye-Movement Patterns during an Embedded Figures Test in Children with ASD

ERIC Educational Resources Information Center

Keehn, Brandon; Brenner, Laurie A.; Ramos, Aurora I.; Lincoln, Alan J.; Marshall, Sandra P.; Muller, Ralph-Axel

2009-01-01

The present study examined fixation frequency and duration during an Embedded Figures Test (EFT) in an effort to better understand the attentional and perceptual processes by which individuals with autism spectrum disorder (ASD) achieve accelerated EFT performance. In particular, we aimed to elucidate differences in the patterns of eye-movement in…

33 CFR Appendix - Figures to Subpart H of Part 183

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Figures to Subpart H of Part 183 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Flotation Requirements for Outboard Boats Rated for Engines of 2 Horsepower or Less Tests Level flotation test...

33 CFR Appendix - Figures to Subpart H of Part 183

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Figures to Subpart H of Part 183 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Flotation Requirements for Outboard Boats Rated for Engines of 2 Horsepower or Less Tests Level flotation test...

33 CFR Appendix - Figures to Subpart H of Part 183

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Figures to Subpart H of Part 183 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Flotation Requirements for Outboard Boats Rated for Engines of 2 Horsepower or Less Tests Level flotation test...

33 CFR Appendix - Figures to Subpart H of Part 183

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Figures to Subpart H of Part 183 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Flotation Requirements for Outboard Boats Rated for Engines of 2 Horsepower or Less Tests Level flotation test...

33 CFR Appendix - Figures to Subpart H of Part 183

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Figures to Subpart H of Part 183 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Flotation Requirements for Outboard Boats Rated for Engines of 2 Horsepower or Less Tests Level flotation test...

Developing and Testing a Measure of Social Support with Mexican-Origin Pregnant Adolescents and Their Mother Figures

ERIC Educational Resources Information Center

Umana-Taylor, Adriana J.; Updegraff, Kimberly A.; White, Rebecca M. B.; Herzog, Melissa J.; Pflieger, Jacqueline C.; Madden-Derdich, Debra

2011-01-01

The current study describes the development and psychometric testing of the Global Support From Mother Figure During Pregnancy Scale (GSMF-P). The measure is developed in both Spanish and English to assess social support provided to adolescents during their pregnancies. The current study examines the reliability, cross-language equivalence, and…

Investigation of a Translatable Animal Model in Order to Understand the Etiology of Heterotopic Ossification

DTIC Science & Technology

2017-09-01

dB levels that were made by the AID without attenuation, we performed this testing in a cinderblock-based room with metal ducting, cement floors and... steel -framed ceilings (Figure 7). 8 Figure 7: Image of a corner of the cinderblock room in which testing has been performed. To measure

Geothermal Exploration of Newberry Volcano, Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waibel, Albert F.; Frone, Zachary S.; Blackwell, David D.

Davenport Newberry (Davenport) has completed 8 years of exploration for geothermal energy on Newberry Volcano in central Oregon. Two deep exploration test wells were drilled by Davenport on the west flank of the volcano, one intersected a hydrothermal system; the other intersected isolated fractures with no hydrothermal interconnection. Both holes have bottom-hole temperatures near or above 315°C (600°F). Subsequent to deep test drilling an expanded exploration and evaluation program was initiated. These efforts have included reprocessing existing data, executing multiple geological, geophysical, geochemical programs, deep exploration test well drilling and shallow well drilling. The efforts over the last three yearsmore » have been made possible through a DOE Innovative Exploration Technology (IET) Grant 109, designed to facilitate innovative geothermal exploration techniques. The combined results of the last 8 years have led to a better understanding of the history and complexity of Newberry Volcano and improved the design and interpretation of geophysical exploration techniques with regard to blind geothermal resources in volcanic terrain.« less

Radar sensors for intersection collision avoidance

NASA Astrophysics Data System (ADS)

Jocoy, Edward H.; Phoel, Wayne G.

1997-02-01

On-vehicle sensors for collision avoidance and intelligent cruise control are receiving considerably attention as part of Intelligent Transportation Systems. Most of these sensors are radars and `look' in the direction of the vehicle's headway, that is, in the direction ahead of the vehicle. Calspan SRL Corporation is investigating the use of on- vehicle radar for Intersection Collision Avoidance (ICA). Four crash scenarios are considered and the goal is to design, develop and install a collision warning system in a test vehicle, and conduct both test track and in-traffic experiments. Current efforts include simulations to examine ICA geometry-dependent design parameters and the design of an on-vehicle radar and tracker for threat detection. This paper discusses some of the simulation and radar design efforts. In addition, an available headway radar was modified to scan the wide angles (+/- 90 degree(s)) associated with ICA scenarios. Preliminary proof-of-principal tests are underway as a risk reduction effort. Some initial target detection results are presented.

GIS-based intersection inventory system (GIS-IIS) : integrating GIS, traffic signal data and intersection images

DOT National Transportation Integrated Search

2005-02-25

This study developed a GIS-based Intersection Inventory System (GIS-IIS) for the signalized : intersections on the state-maintained highway system of IDOT District 6. GIS-IIS is a tool to have an : easy access to intersection inventory data, photogra...

Viscoelastic Properties of Advanced Polymer Composites for Ballistic Protective Applications

DTIC Science & Technology

1994-09-01

ofthe Damaged Sample 78 Figure 69: Fracture Surface of Damage Area Near the Point of Penetration 79 Figure 70. Closer View ofthe Damaged Area...LIST OF TABLES Table 1. Basic Mechanical Properties of the Materials 6 Table 2. Initial DMA Test Results 23 Table 3. Flexural Three Point Bend... point bend testing was conducted using an Instron 1127 Universal Tester to verify the DMA test method and specimen clamping configuration. Interfacial

Demonstration/Validation of Low Volatile Organic Compound (VOC) Chemical Agent Resistant Coating (CARC)

DTIC Science & Technology

2003-11-25

alkyd resin enamel was 14 Figure 1 -- Test Panels Before Application of WD CARC at MCB Figure 2 -- Test Panels with WD CARC Applied at MCB...WD) Chemical Agent Resistant Coating (CARC) patented (#5,691,410) by the Army Research Laboratory (ARL) has undergone technology Demonstration...Resistant Coating (CARC) patented (#5,691,410) by the Army Research Laboratory (ARL) has undergone technology Demonstration/Validation (Dem/Val) testing

29. Photocopy of engineering drawing, May, 1941 (original drawing located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. Photocopy of engineering drawing, May, 1941 (original drawing located at Fairchild Air Force Base, Civil Engineering Building, Civil Engineering vault). ENGINE TEST CELL BUILDING. 19508 RENOVATION OF FIRST FLOOR, CENTRAL PORTION. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

49 CFR 572.42 - Thorax.

Code of Federal Regulations, 2011 CFR

2011-10-01

... impact, is impacted by a test probe conforming to § 572.44(a) at 14 fps in accordance with paragraph (b... of the test probe at the lateral side of the chest at the intersection of the centerlines of the... side of the vehicle. The probe's centerline is perpendicular to thorax's midsagittal plane. (3) Align...

49 CFR 572.42 - Thorax.

Code of Federal Regulations, 2013 CFR

2013-10-01

... impact, is impacted by a test probe conforming to § 572.44(a) at 14 fps in accordance with paragraph (b... of the test probe at the lateral side of the chest at the intersection of the centerlines of the... side of the vehicle. The probe's centerline is perpendicular to thorax's midsagittal plane. (3) Align...

49 CFR 572.42 - Thorax.

Code of Federal Regulations, 2014 CFR

2014-10-01

... impact, is impacted by a test probe conforming to § 572.44(a) at 14 fps in accordance with paragraph (b... of the test probe at the lateral side of the chest at the intersection of the centerlines of the... side of the vehicle. The probe's centerline is perpendicular to thorax's midsagittal plane. (3) Align...

49 CFR 572.42 - Thorax.

Code of Federal Regulations, 2012 CFR

2012-10-01

... impact, is impacted by a test probe conforming to § 572.44(a) at 14 fps in accordance with paragraph (b... of the test probe at the lateral side of the chest at the intersection of the centerlines of the... side of the vehicle. The probe's centerline is perpendicular to thorax's midsagittal plane. (3) Align...

Detecting Abnormal Vehicular Dynamics at Intersections Based on an Unsupervised Learning Approach and a Stochastic Model

PubMed Central

Jiménez-Hernández, Hugo; González-Barbosa, Jose-Joel; Garcia-Ramírez, Teresa

2010-01-01

This investigation demonstrates an unsupervised approach for modeling traffic flow and detecting abnormal vehicle behaviors at intersections. In the first stage, the approach reveals and records the different states of the system. These states are the result of coding and grouping the historical motion of vehicles as long binary strings. In the second stage, using sequences of the recorded states, a stochastic graph model based on a Markovian approach is built. A behavior is labeled abnormal when current motion pattern cannot be recognized as any state of the system or a particular sequence of states cannot be parsed with the stochastic model. The approach is tested with several sequences of images acquired from a vehicular intersection where the traffic flow and duration used in connection with the traffic lights are continuously changed throughout the day. Finally, the low complexity and the flexibility of the approach make it reliable for use in real time systems. PMID:22163616

Detecting abnormal vehicular dynamics at intersections based on an unsupervised learning approach and a stochastic model.

PubMed

Jiménez-Hernández, Hugo; González-Barbosa, Jose-Joel; Garcia-Ramírez, Teresa

2010-01-01

This investigation demonstrates an unsupervised approach for modeling traffic flow and detecting abnormal vehicle behaviors at intersections. In the first stage, the approach reveals and records the different states of the system. These states are the result of coding and grouping the historical motion of vehicles as long binary strings. In the second stage, using sequences of the recorded states, a stochastic graph model based on a Markovian approach is built. A behavior is labeled abnormal when current motion pattern cannot be recognized as any state of the system or a particular sequence of states cannot be parsed with the stochastic model. The approach is tested with several sequences of images acquired from a vehicular intersection where the traffic flow and duration used in connection with the traffic lights are continuously changed throughout the day. Finally, the low complexity and the flexibility of the approach make it reliable for use in real time systems.

Welfare policymaking and intersections of race, ethnicity, and gender in U.S. state legislatures.

PubMed

Reingold, Beth; Smith, Adrienne R

2012-01-01

Welfare policy in the American states has been shaped profoundly by race, ethnicity, and representation. Does gender matter as well? Focusing on state welfare reform in the mid-1990s, we test hypotheses derived from two alternative approaches to incorporating gender into the study of representation and welfare policymaking. An additive approach, which assumes gender and race/ethnicity are distinct and independent, suggests that female state legislators—regardless of race/ethnicity—will mitigate the more restrictive and punitive aspects of welfare reform, much like their African American and Latino counterparts do. In contrast, an intersectional approach, which highlights the overlapping and interdependent nature of gender and race/ethnicity, suggests that legislative women of color will have the strongest countervailing effect on state welfare reform—stronger than that of other women or men of color. Our empirical analyses suggest an intersectional approach yields a more accurate understanding of gender, race/ethnicity, and welfare politics in the states.

Accuracy of WAAS-Enabled GPS-RF Warning Signals When Crossing a Terrestrial Geofence

PubMed Central

Grayson, Lindsay M.; Keefe, Robert F.; Tinkham, Wade T.; Eitel, Jan U. H.; Saralecos, Jarred D.; Smith, Alistair M. S.; Zimbelman, Eloise G.

2016-01-01

Geofences are virtual boundaries based on geographic coordinates. When combined with global position system (GPS), or more generally global navigation satellite system (GNSS) transmitters, geofences provide a powerful tool for monitoring the location and movements of objects of interest through proximity alarms. However, the accuracy of geofence alarms in GNSS-radio frequency (GNSS-RF) transmitter receiver systems has not been tested. To achieve these goals, a cart with a GNSS-RF locator was run on a straight path in a balanced factorial experiment with three levels of cart speed, three angles of geofence intersection, three receiver distances from the track, and three replicates. Locator speed, receiver distance and geofence intersection angle all affected geofence alarm accuracy in an analysis of variance (p = 0.013, p = 2.58 × 10−8, and p = 0.0006, respectively), as did all treatment interactions (p < 0.0001). Slower locator speed, acute geofence intersection angle, and closest receiver distance were associated with reduced accuracy of geofence alerts. PMID:27322287

Accuracy of WAAS-Enabled GPS-RF Warning Signals When Crossing a Terrestrial Geofence.

PubMed

Grayson, Lindsay M; Keefe, Robert F; Tinkham, Wade T; Eitel, Jan U H; Saralecos, Jarred D; Smith, Alistair M S; Zimbelman, Eloise G

2016-06-18

Geofences are virtual boundaries based on geographic coordinates. When combined with global position system (GPS), or more generally global navigation satellite system (GNSS) transmitters, geofences provide a powerful tool for monitoring the location and movements of objects of interest through proximity alarms. However, the accuracy of geofence alarms in GNSS-radio frequency (GNSS-RF) transmitter receiver systems has not been tested. To achieve these goals, a cart with a GNSS-RF locator was run on a straight path in a balanced factorial experiment with three levels of cart speed, three angles of geofence intersection, three receiver distances from the track, and three replicates. Locator speed, receiver distance and geofence intersection angle all affected geofence alarm accuracy in an analysis of variance (p = 0.013, p = 2.58 × 10(-8), and p = 0.0006, respectively), as did all treatment interactions (p < 0.0001). Slower locator speed, acute geofence intersection angle, and closest receiver distance were associated with reduced accuracy of geofence alerts.

Forensic Analysis of Digital Image Tampering

DTIC Science & Technology

2004-12-01

analysis of when each method fails, which Chapter 4 discusses. Finally, a test image containing an invisible watermark using LSB steganography is...2.2 – Example of invisible watermark using Steganography Software F5 ............. 8 Figure 2.3 – Example of copy-move image forgery [12...Figure 3.11 – Algorithm for JPEG Block Technique ....................................................... 54 Figure 3.12 – “Forged” Image with Result

Novel Processing of Boron Carbide (B4C): Plasma Synthesized Nano Powders and Pressureless Sintering Forming of Complex Shapes

DTIC Science & Technology

2008-12-01

Figure 4. B4C plates formed via hot pressing with a curved shape. Commercial B4C shows a large number of lenticular graphitic inclusions, Figure 5...materials and they act as crack initiation points in flexure testing. Figure 5. SEM micrograph showing large lenticular graphitic inclusions in commercial

Distinct Neuroanatomical Substrates and Cognitive Mechanisms of Figure Copy Performance in Alzheimer's Disease and Behavioral Variant Frontotemporal Dementia

ERIC Educational Resources Information Center

Possin, Katherine L.; Laluz, Victor R.; Alcantar, Oscar Z.; Miller, Bruce L.; Kramer, Joel H.

2011-01-01

Figure copy is the most common method of visual spatial assessment in dementia evaluations, but performance on this test may be multifactorial. We examined the neuroanatomical substrates of figure copy performance in 46 patients with Alzheimer's disease (AD) and 48 patients with the behavioral variant of Frontotemporal dementia (bvFTD). A group of…

Air Vehicle Integration and Technology Research (AVIATR). Delivery Order 0013: Nonlinear, Low-Order/Reduced-Order Modeling Applications and Demonstration

DTIC Science & Technology

2011-12-01

image) ................. 114 Figure 156 – Abaqus thermal model attempting to characterize the thermal profile seen in the test data...optimization process ... 118 Figure 159 – Thermal profile for optimized Abaqus thermal solution ....................................... 119 Figure 160 – LVDT...Coefficients of thermal expansion results ................................................................. 121 Table 12 – LVDT correlation results

Space Qualification Testing of a Shape Memory Alloy Deployable CubeSat Antenna

DTIC Science & Technology

2016-09-15

the SMA deployment in the space environment. The HCT QHA successfully passed all required NASA General Environmental Verification Standards space... NASA /JPL parabolic deployable antenna design [28] .................. 19 Figure 11. SERC and NASA /JPL parabolic antenna prototype [28...19 Figure 12. SERC and NASA /JPL parabolic antenna stowed configuration [28] ............. 20 Figure 13. JPL KaPDA antenna [29

A New Generation of Atmospheric Tracers - The Biological Connection

DTIC Science & Technology

1989-08-07

Butenandt, A., R. Beckmann, D. Stamai and E. Hiecker, 1959: Uber dea sexuallockstoff des seidenspinners Bombyx mori , reindarstellung und konstitution...9-16. Kaissling, K.E., 1979: Recognition of pheromones by moths especially in Saturniids and Bombyx mori , In "Chemical Ecology: Odour Communication...Special I-I---- LIST OF FIGURES Figure 1 Pheromone communication in Bombyz mori .................................. 9 Figure 2 EAG laboratory test

The Role of Inhibitory Control in the Development of Human Figure Drawing in Young Children

ERIC Educational Resources Information Center

Riggs, Kevin J.; Jolley, Richard P.; Simpson, Andrew

2013-01-01

We investigated the role of inhibitory control in young children's human figure drawing. We used the Bear-Dragon task as a measure of inhibitory control and used the classification system devised by Cox and Parkin to measure the development of human figure drawing. We tested 50 children aged between 40 and 64 months. Regression analysis showed…

Flood-Fighting Structures Demonstration and Evaluation Program: Laboratory and Field Testing in Vicksburg, Mississippi

DTIC Science & Technology

2007-07-01

accomplished where possible using a yellow stationary cable suspended about 1 to 2 in. above the levee and a blue strip painted directly on top of...15 Figure 2-7. Lasers and laser targets................................................................ 16 Figure 2-7a. Lasers and...their targets on levee ................................................. 17 Figure 2-7b. Displacement data from laser 0

Turning movements, vehicle offsets and ageing drivers driving behaviour at channelized and unchannelized intersections.

PubMed

Choi, Jaisung; Tay, Richard; Kim, Sangyoup; Jeong, Seungwon

2017-11-01

Ageing drivers experience a higher risk of intersection crashes because of their decrease in driving efficiency, including the decline in cognitive ability, head and neck flexibility, and visual acuity. Although several studies have been conducted to examine the factors associated with ageing driver crashes at intersections, little research has been conducted to examine the differences in the factors related to ageing drivers' turning paths and intersection geometric features. This study aims to improve the safety of ageing drivers at intersections by identifying the maneuvers that are risky for them and tracking their turning movements at selected intersections. We find that ageing drivers experience more crashes at intersections than younger drivers, especially crashes involving turning movements. Furthermore, ageing drivers experience more crashes at unchannelized intersections compared to channelized intersections. In addition, this study finds that ageing drivers exhibit greater and more inconsistent offsets during turning movements compared to those of younger drivers at both channelized and unchannelized intersections. Ageing drivers also tend to make relatively sharper or tighter turns than younger drivers. Hence, transportation engineers and road safety professionals should consider appropriate countermeasures to reduce the risks of crashes involving ageing drivers at intersections. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of flow in an observation well intersecting a single fracture

USGS Publications Warehouse

Lapcevic, P.A.; Novakowski, K.S.; Paillet, Frederick L.

1993-01-01

A semi-analytical model is developed to determine transmissivity and storativity from the interpretation of transient flow in an observation well due to pumping in a source well where the two wells are connected by a single fracture. Flow rate can be determined using a heat-pulse flowmeter located above the intersection of the fracture in the observation well. The results of a field experiment were interpreted using the new model and compared with drawdown data from the same test. Good agreement between the transmissivity estimates was observed whereas estimates of storativity were found to be better determined from the analysis of flow rate. ?? 1993.

Multiuse trail intersection safety analysis: A crowdsourced data perspective.

PubMed

Jestico, Ben; Nelson, Trisalyn A; Potter, Jason; Winters, Meghan

2017-06-01

Real and perceived concerns about cycling safety are a barrier to increased ridership in many cities. Many people prefer to bike on facilities separated from motor vehicles, such as multiuse trails. However, due to underreporting, cities lack data on bike collisions, especially along greenways and multiuse paths. We used a crowdsourced cycling incident dataset (2005-2016) from BikeMaps.org for the Capital Regional District (CRD), BC, Canada. Our goal was to identify design characteristics associated with unsafe intersections between multiuse trails and roads. 92.8% of mapped incidents occurred between 2014 and 2016. We extracted both collision and near miss incidents at intersections from BikeMaps.org. We conducted site observations at 32 intersections where a major multiuse trail intersected with roads. We compared attributes of reported incidents at multiuse trail-road intersections to those at road-road intersections. We then used negative binomial regression to model the relationship between the number of incidents and the infrastructure characteristics at multiuse trail-road intersections. We found a higher proportion of collisions (38%, or 17/45 total reports) at multiuse trail-road intersections compared to road-road intersections (23%, or 62/268 total reports). A higher proportion of incidents resulted in an injury at multiuse trail-road intersections compared to road-road intersections (33% versus 15%). Cycling volumes, vehicle volumes, and trail sight distance were all associated with incident frequency at multiuse trail-road intersections. Supplementing traditional crash records with crowdsourced cycling incident data provides valuable evidence on cycling safety at intersections between multiuse trails and roads, and more generally, when conflicts occur between diverse transportation modes. Copyright © 2017. Published by Elsevier Ltd.

Lightcurves of the Chelyabinsk bolide derived from a dashboard camera movie

NASA Astrophysics Data System (ADS)

Yanagisawa, M.

2014-07-01

The bolide explosion on Feb. 15, 2013 over Chelyabinsk, Russia was the next most violent after the probable bolide explosion in Tunguska, Siberia in 1908. It has been estimated that a meteoroid about 20 m in diameter entered the atmosphere at about 19 km/s [1] with an impact angle measured from the horizon of about 19 degrees. It was recorded by many dashboard movie cameras, and the movies are released on the Internet. To obtain the lightcurves of the bolide, we analyzed a movie uploaded by Aleksandr Ivanov [2]. The event was recorded when his car stopped at an intersection in the city of Kamensk-Uralsky, Russia, located about 140 km north of Chelyabinsk. The geographic coordinates of the intersection and the field of view of the camera were obtained with the help of the Google Maps. We corrected each frame of the movie for the non-linearity between the input light and output of the camera, and for the temporal variations of the camera gains. Because the bolide images were severely saturated, we measured the light isotropically scattered by a snow-covered region. Brightness of the blue sky at 650, 550, and 450-nm wavelengths, calculated by using a model, was used as brightness standards for the R (red), G (green), and B (blue) bands of the camera. The distance and the air mass between the bolide and the intersection were calculated for the bolide trajectory [3], and the source luminosities of the bolide were calculated for the three bands. The temporal variations of the luminosities thus obtained are shown in the figure with the bolide altitudes calculated on its trajectory [3]. It should be noted that the times in the figure are adjusted so that the maximum luminosity would occur at 3h20m32.2s (UT) [4]. A procedure has been used to estimate the impact energies from the US satellite observations in which the bolides are assumed to be 6000 K blackbodies [5]. We supposed that the spectral response of the satellite sensor would be close to the R band, and obtained the impact energy of 400 kton (1 kton = 4.2 x 10^{12} J) according to the procedure. It agrees with the results reported thus far [1, 4]. The bolide was not so bright in the R band relative to the G and B bands until 29.3 s (47 km in altitude). The R band brightness became comparable to or larger than the G and B brightnesses after that. Assuming the bolide to be a blackbody, and approximating the luminosity ratios in the three colors, G/B, R/G, and R/B, to be B_T(550 nm)/B_T(450 nm), B_T(650 nm)/B_T(550 nm), and B_T(650 nm)/B_T(450 nm), respectively, where B_T (λ) is the Planck function for the temperature T, we calculated temperatures for each ratio as shown in the figure. The temperatures for the G/B, R/G, and R/B ratios are not in agreement with each other before 29.3 s (above 47 km in bolide altitude). The disagreement suggests that the radiation would have been dominated by line spectra. On the other hand, the three temperatures agree with each other at about 3500 K, when the bolide was below 38 km and very bright. If the bolide was a 3500 K blackbody, the area which was necessary for the maximum luminosity at 32.2 s was about 120 km^2. The radiating region could be, for example, a sphere of 3 km in radius, or a cylinder of 1 km in radius and 20 km in length. However, the possibility that the agreement of the three temperatures could be a coincidence cannot be discarded.

Reagan Test Site Distributed Operations

DTIC Science & Technology

2012-01-01

for missile testing because of its geography and its strategic location in the Pacific [ 1 ]. The atoll’s distance from launch facilities at Vandenberg...research on ballistic missile defense 50 years ago (Figure 1 ). The subsequent development of RTS’s unique instrumentation sensors, including high...control center including hardware, software, networks, and the facility functioned successfully. FIGURE 1 . The map shows the isolated location of the

Impact of Steel Fiber Size and Shape on the Mechanical Properties of Ultra-High Performance Concrete

DTIC Science & Technology

2015-08-01

32 Appendix B: DTT Specimens Pretest / Posttest ..................................................................................... 36 Appendix C...type and then subsequently compared to that material’s UCS. Figure 6 shows the splitting tensile testing set-up, both pretest and posttest . Figure...9 show the actual test configuration, pretest and posttest , respectively. This configuration utilized a chucking mechanism suited to the shape of

A New Step towards Understanding Embedded Figures Test Performance in the Autism Spectrum: The Radial Frequency Search Task

ERIC Educational Resources Information Center

Almeida, Renita A.; Dickinson, J. Edwin; Maybery, Murray T.; Badcock, Johanna C.; Badcock, David R.

2010-01-01

The Embedded Figure Test (EFT) requires locating a simple shape embedded within a background of overlapping target-irrelevant scene elements. Observers with autism, or those with high levels of autistic-like traits, typically outperform matched comparison groups on the EFT. This research investigated the critical visual properties which give rise…

16 CFR Figure 3 to Part 1213 - Motion of Test Template Arrested by Simultaneous Contact With Both Sides of “A” Section and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Motion of Test Template Arrested by Simultaneous Contact With Both Sides of âAâ Section and Boundaries of Opening 3 Figure 3 to Part 1213 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY...

16 CFR Figure 3 to Part 1213 - Motion of Test Template Arrested by Simultaneous Contact With Both Sides of “A” Section and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Motion of Test Template Arrested by Simultaneous Contact With Both Sides of âAâ Section and Boundaries of Opening 3 Figure 3 to Part 1213 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY...

16 CFR Figure 3 to Part 1213 - Motion of Test Template Arrested by Simultaneous Contact With Both Sides of “A” Section and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Motion of Test Template Arrested by Simultaneous Contact With Both Sides of âAâ Section and Boundaries of Opening 3 Figure 3 to Part 1213 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY...

16 CFR Figure 3 to Part 1213 - Motion of Test Template Arrested by Simultaneous Contact With Both Sides of “A” Section and...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Motion of Test Template Arrested by Simultaneous Contact With Both Sides of âAâ Section and Boundaries of Opening 3 Figure 3 to Part 1213 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY...

Brief Report: The Relationship between Visual Acuity, the Embedded Figures Test and Systemizing in Autism Spectrum Disorders

ERIC Educational Resources Information Center

Brosnan, Mark J.; Gwilliam, Lucy R.; Walker, Ian

2012-01-01

Enhanced performance upon the Embedded Figures Test (EFT) in individuals with autism spectrum disorder (ASD) has informed psychological theories of the non-social aspects that characterise ASD. The Extreme Male Brain theory of autism proposes that enhanced visual acuity underpins greater attention to detail (assessed by the EFT) which is a…

16 CFR Figure 3 to Part 1213 - Motion of Test Template Arrested by Simultaneous Contact With Both Sides of “A” Section and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Motion of Test Template Arrested by Simultaneous Contact With Both Sides of âAâ Section and Boundaries of Opening 3 Figure 3 to Part 1213 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY...

Informational primacy of visual dimensions: specialized roles for luminance and chromaticity in figure-ground perception.

PubMed

Yamagishi, N; Melara, R D

2001-07-01

Three experiments were conducted to examine the distinct contributions of two visual dimensions to figure-ground segregation. In each experiment, pattern identification was assessed by asking observers to judge whether a near-threshold test pattern was the same or different in shape to a high-contrast comparison pattern. A test pattern could differ from its background along one dimension, either luminance (luminance tasks) or chromaticity (chromaticity tasks). In each task, performance in a baseline condition, in which the test pattern was intact, was compared with performance in each of several degradation conditions, in which either the contour or the surface of the figure was degraded, using either partial occlusion (Experiment 1) or ramping (Experiments 2 and 3) of figure-ground differences. In each experiment, performance in luminance tasks was worst when the contour was degraded, whereas performance in chromaticity tasks was worst when the surface was degraded. This interaction was found even when spatial frequencies were fixed across test patterns by low-pass filtering. The results are consistent with a late (postfiltering) dual-mechanism system that processes luminance information to extract boundary representations and chromaticity information to extract surface representations.

Organizational strategies mediate nonverbal memory impairment in obsessive-compulsive disorder.

PubMed

Savage, C R; Baer, L; Keuthen, N J; Brown, H D; Rauch, S L; Jenike, M A

1999-04-01

Previous neuropsychological studies of obsessive-compulsive disorder (OCD) have indicated impaired executive functioning and nonverbal memory. The extent to which impaired executive functioning impacts nonverbal memory has not been established. The current study investigated the mediating effects of organizational strategies used when copying a figure on subsequent nonverbal memory for that figure. We examined neuropsychological performance in 20 unmedicated subjects with OCD and 20 matched normal control subjects. Subjects were administered the Rey-Osterrieth Complex Figure Test (RCFT) and neuropsychological tests assessing various aspects of executive function. OCD subjects differed significantly from healthy control subjects in the organizational strategies used to copy the RCFT figure, and they recalled significantly less information on both immediate and delayed testing. Multiple regression analyses indicated that group differences in immediate percent recall were significantly mediated by copy organizational strategies. Further exploratory analyses indicated that organizational problems in OCD may be related to difficulties shifting mental and/or spatial set. Immediate nonverbal memory problems in OCD subjects were mediated by impaired organizational strategies used during the initial copy of the RCFT figure. Thus, the primary deficit was one affecting executive function, which then had a secondary effect on immediate memory. These findings are consistent with current theories proposing frontal-striatal system dysfunction in OCD.

WARFIGHTER SUPPORT: Independent Expert Assessment of Army Body Armor Test Results and Procedures Needed Before Fielding

DTIC Science & Technology

2009-10-01

protective vest and ceramic plate inserts. GAO observed Preliminary Design Model testing of new plate designs, which resulted in the Army’s...Table 1: Organizations Contacted for Information about Body Armor Testing 46 Figures Figure 1: ESAPI Plates as Worn inside Outer Tactical Vest 11...Central Command has required that DOD personnel in its area of operations be issued the Interceptor Body Armor system, comprising ceramic plates that

Creating Cost Growth Models for the Engineering and Manufacturing Development Phase of Acquisition Using Logistic and Multiple Regression

DTIC Science & Technology

2004-03-01

constant variance via an analysis of the residuals, as well as the Breusch - Pagan test (see Figure 3 below). As a result, we follow the footsteps of...reasonably normal, which ensures that our residuals meet the assumption of constant variance by passing the Breusch - Pagan test (see Figure 4 below...sections for Research and Development, Test and Evaluation (RDT&E), procurement and military construction (Jarvaise, 1996:3). While differing

Test Operations Procedure (TOP) 05-2-543 Enhanced Flight Termination Receiver (EFTR) Range Certification Testing

DTIC Science & Technology

2011-07-25

testing, the EFTR must be keyed with the same key used to encrypt the Enhanced Flight Termination Systems ( EFTS ) message. To ensure identical keys...required to verify the proper state. e. Procedure. (1) Pull up EFTS graphic user interface (GUI) (Figure 3). (2) Click “Receiver Power On...commanded mode steady state input currents will not exceed their specified values. TOP 05-2-543 25 July 2011 19 Figure 3. EFTS GUIa

Feedback Enhances Feedforward Figure-Ground Segmentation by Changing Firing Mode

PubMed Central

Supèr, Hans; Romeo, August

2011-01-01

In the visual cortex, feedback projections are conjectured to be crucial in figure-ground segregation. However, the precise function of feedback herein is unclear. Here we tested a hypothetical model of reentrant feedback. We used a previous developed 2-layered feedforwardspiking network that is able to segregate figure from ground and included feedback connections. Our computer model data show that without feedback, neurons respond with regular low-frequency (∼9 Hz) bursting to a figure-ground stimulus. After including feedback the firing pattern changed into a regular (tonic) spiking pattern. In this state, we found an extra enhancement of figure responses and a further suppression of background responses resulting in a stronger figure-ground signal. Such push-pull effect was confirmed by comparing the figure-ground responses withthe responses to a homogenous texture. We propose that feedback controlsfigure-ground segregation by influencing the neural firing patterns of feedforward projecting neurons. PMID:21738747

Antitumor Efficacy of 7β, 17α-Dimethyltestosterone (Calusterone) in Advanced Female Breast Cancer

PubMed Central

Gordan, Gilbert S.; Halden, Allan; Walter, Robert M.

1970-01-01

Twenty-two women with far advanced, hormone-refractory breast cancer were treated with 7β,17α dimethyltestosterone (calusterone), 150 to 300 mg per day by mouth, to test its antitumor efficacy. Using the strict criteria of the Cooperative Breast Cancer Group, 14 of the women (64 percent) obtained objective regressions. Regressions lasted for from 3 to 20 months, averaging 7 months. Undesirable actions are those of a 17α-alkylated, weak androgen with inconstant bromsulphalein retention, but without elevation of serum bilirubin levels or of hepatic enzymes. This compound has potent antitumor efficacy in women with advanced breast cancer, is better tolerated than most chemotherapeutic or steroidal antitumor agents, and will probably assume an important position in the care of these patients. ImagesFigure 1Figure 2Figure 3Figure 3Figure 4Figure 5Figure 5 PMID:5457511

Configuration color vision tests: the interaction between aging and the complexity of figure-ground segregation.

PubMed

Stanford, T; Pollack, R H

1984-09-01

A cross-sectional study comparing response time and the percentage of items correctly identified in three color vision tests (Pflügertrident, HRR-AO pseudoisochromatic plates, and AO pseudoisochromatic plates) was carried out on 72 women (12 in each decade) ranging from ages 20 to 79 years. Overall, time scores increased across the age groups. Analysis of the correctness scores indicated that the AO pseudoisochromatic plates requiring the identification of numbers was more difficult than the other tests which consisted of geometric forms or the letter E. This differential difficulty increased as a function of age. There was no indication of color defect per se which led to the conclusion that figure complexity may be the key variable determining performance. The results were similar to those obtained by Lee and Pollack (1978) in their study of the Embedded Figures Test.

Defense Management: DOD Needs to Improve Program Management, Policy, and Testing to Enhance Ability to Field Operationally Useful Non-lethal Weapons

DTIC Science & Technology

2009-04-01

through Fielding and Support 12 Figure 3: Active Denial System 2 25 Figure 4: FN-303 Less-Lethal Launching System 26 Figure 5: TASER ® X-26 27 Figure 6...System Grenades 5, 6, 8, 9, 11, 12 , 13, 14, 19, 21, 25, 26 Human Electro Muscular Incapacitation TASER ® X-26 5, 13, 14, 21 Improved Acoustic...modes Modular accessory shotgun system Provides the capability to fire lethal, non-lethal, and door- breaching 12 - gauge rounds. Future force

Continued Investigation of Leakage and Power Loss Test Results for Competing Turbine Engine Seals

DTIC Science & Technology

2006-09-01

Pressure-balanced design Figure 3.—Annular seal made of Inconel 625 . Note, each grid square is 6.35 mm. Figure 4.—Four-knife labyrinth...seal made of Inconel 625 . NASA/TM—2006-214420 7 Figure 5.—Brush seal with flow deflector. Figure 6.—Finger seal design. NASA/TM—2006-214420 8...thermocouples are located at the 90° and 180° positions (0° is top-dead-center). Type-K thermocouples are used and all are 157 µm, Inconel sheath, closed

2. SOUTHEAST SIDE. HIGH PRESSURE HELIUM STORAGE TANKS AT LEFT. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. SOUTHEAST SIDE. HIGH PRESSURE HELIUM STORAGE TANKS AT LEFT. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Helium Compression Plant, Test Area 1-115, intersection of Altair & Saturn Boulevards, Boron, Kern County, CA

Adaptive Urban Signal Control and Integration (AUSCI) : evaluation final report

DOT National Transportation Integrated Search

2000-10-01

This report presents an evaluation of the Adaptive Urban Signal Control and Integration (AUSCI) Intelligent Transportation System (ITS) Field Operational Test in Minneapolis, Minnesota. The project involved a 56-intersection portion of Minneapolis, e...

Visual processing in adolescents with autism spectrum disorder: evidence from embedded figures and configural superiority tests.

PubMed

Dillen, Claudia; Steyaert, Jean; Op de Beeck, Hans P; Boets, Bart

2015-05-01

The embedded figures test has often been used to reveal weak central coherence in individuals with autism spectrum disorder (ASD). Here, we administered a more standardized automated version of the embedded figures test in combination with the configural superiority task, to investigate the effect of contextual modulation on local feature detection in 23 adolescents with ASD and 26 matched typically developing controls. On both tasks both groups performed largely similarly in terms of accuracy and reaction time, and both displayed the contextual modulation effect. This indicates that individuals with ASD are equally sensitive compared to typically developing individuals to the contextual effects of the task and that there is no evidence for a local processing bias in adolescents with ASD.

Design Considerations for Remotely Operated Welding in Space: Task Definition and Visual Weld Monitoring Experiment

DTIC Science & Technology

1993-05-01

processes [48] ................ 91 Figure 4.14 Energy effectiveness comparison between EBW, GMAW , and PAW [48...1 10 Figure 5.2 The spectrum of control modes [76] ................. 112 Figure 5.3 Levels of control for GMAW [26...vehicular activity FTS Flight Telerobotic Servicer GMAW Gas metal arc welding GTAW Gas tungsten arc welding LEO Low-earth orbit NDT Non-destructive test

49 CFR Appendix - Figures to Subpart P of Part 572

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Figures to Subpart P of Part 572 Transportation..., Alpha Version Test conditions and instrumentation. Pt. 572, Subpt. P, Figs. Figures to Subpart P of Part 572 Pt. 572, Subpt. P, Fig. P1 ER22MR00.000 Pt. 572, Subpt. P, Fig. P2 ER22MR00.001 Pt. 572, Subpt. P...

49 CFR Appendix - Figures to Subpart P of Part 572

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart P of Part 572 Transportation..., Alpha Version Test conditions and instrumentation. Pt. 572, Subpt. P, Figs. Figures to Subpart P of Part 572 Pt. 572, Subpt. P, Fig. P1 ER22MR00.000 Pt. 572, Subpt. P, Fig. P2 ER22MR00.001 Pt. 572, Subpt. P...

49 CFR Appendix - Figures to Subpart O of Part 572

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart O of Part 572 Transportation... Dummy, Alpha Version Test conditions and instrumentation. Pt. 572, Subpt. O, Fig. 01 Figures to Subpart O of Part 572 ER15JY02.000 Pt. 572, Subpt. O, Fig. O2 ER15JY02.001 Pt. 572, Subpt. O, Fig. O3...

Evidence of a Flynn Effect in Children's Human Figure Drawings (1902-1968).

PubMed

Genovese, Jeremy E C

2018-05-25

The Flynn effect is the long-term trend for scores on tests of cognitive ability to increase across cohorts. Several samples of children's human figure drawings, published in 1902, 1926, 1963, and 1968, are examined for evidence of a Flynn effect. Results show that larger percentages of children draw more complete human figures over the course of the 20th century.

Cryogenic Test Results of Hextek Mirror

NASA Technical Reports Server (NTRS)

Hadaway, James; Stahl, H. Philip; Eng, Ron; Hogue, William

2004-01-01

A 250 mm diameter lightweight borosilicate mirror has been interferometrically tested from room-temperature down to 30 K at the X-Ray Calibration Facility (XRCF) at Marshall Space Flight Center (MSFC). The minor blank was manufactured by Hextek Corporation using a high-temperature gas fusion process and was then polished at MSFC. It is a sandwich-type mirror consisting of a thin face-sheet (approx.1.5 mm thick), a core structure (20 mm thick, approx.43 mm diameter cells, & 0.5-1.2 mm thick walls), and a thin back-sheet (3 mm thick). The mirror has a 2500 mm spherical radius-of- curvature @/lo). The areal density is 14 kg/sq m. The mirror was tested in the 1 m x 2 m chamber using an Instantaneous Phase Interferometer (PI) from ADE Phase Shift Technologies. The mirror was tested twice. The first test measured the change in surface figure from ambient to 30 K and the repeatability of the change. An attempt was then made by QED Technologies to cryo-figure the mirror using magnetorheological finishing. The second test measured the effectiveness of the cryo- figuring. This paper will describe the test goals, the test instrumentation, and the test results for these cryogenic tests.

Auditory skills of figure-ground and closure in air traffic controllers.

PubMed

Villar, Anna Carolina Nascimento Waack Braga; Pereira, Liliane Desgualdo

2017-12-04

To investigate the auditory skills of closure and figure-ground and factors associated with health, communication, and attention in air traffic controllers, and compare these variables with those of other civil and military servants. Study participants were sixty adults with normal audiometric thresholds divided into two groups matched for age and gender: study group (SG), comprising 30 air traffic controllers and control group (CG), composed of 30 other military and civil servants. All participants were asked a number of questions regarding their health, communication, and attention, and underwent the Speech-in-Noise Test (SIN) to assess their closure skills and the Synthetic Sentence Identification Test - Ipsilateral Competitive Message (SSI-ICM) in monotic listening to evaluate their figure-ground abilities. Data were compared using nonparametric statistical tests and logistic regression analysis. More individuals in the SG reported fatigue and/or burnout and work-related stress and showed better performance than that of individuals in the CG for the figure-ground ability. Both groups performed similarly and satisfactorily in the other hearing tests. The odds ratio for participants belonging in the SG was 5.59 and 1.24 times regarding work-related stress and SSI-ICM (right ear), respectively. Results for the variables auditory closure, self-reported health, attention, and communication were similar in both groups. The SG presented significantly better performance in auditory figure-ground compared with that of the CG. Self-reported stress and right-ear SSI-ICM were significant predictors of individuals belonging to the SG.

Comparison of two tension-band fixation materials and techniques in transverse patella fractures: a biomechanical study.

PubMed

Rabalais, R David; Burger, Evalina; Lu, Yun; Mansour, Alfred; Baratta, Richard V

2008-02-01

This study compared the biomechanical properties of 2 tension-band techniques with stainless steel wire and ultra high molecular weight polyethylene (UHMWPE) cable in a patella fracture model. Transverse patella fractures were simulated in 8 cadaver knees and fixated with figure-of-8 and parallel wire configurations in combination with Kirschner wires. Identical configurations were tested with UHMWPE cable. Specimens were mounted to a testing apparatus and the quadriceps was used to extend the knees from 90 degrees to 0 degrees; 4 knees were tested under monotonic loading, and 4 knees were tested under cyclic loading. Under monotonic loading, average fracture gap was 0.50 and 0.57 mm for steel wire and UHMWPE cable, respectively, in the figure-of-8 construct compared with 0.16 and 0.04 mm, respectively, in the parallel wire construct. Under cyclic loading, average fracture gap was 1.45 and 1.66 mm for steel wire and UHMWPE cable, respectively, in the figure-of-8 construct compared with 0.45 and 0.60 mm, respectively, in the parallel wire construct. A statistically significant effect of technique was found, with the parallel wire construct performing better than the figure-of-8 construct in both loading models. There was no effect of material or interaction. In this biomechanical model, parallel wires performed better than the figure-of-8 configuration in both loading regimens, and UHMWPE cable performed similarly to 18-gauge steel wire.

Characteristics of traffic flow at a non-signalized intersection in the framework of game theory

NASA Astrophysics Data System (ADS)

Fan, Hongqiang; Jia, Bin; Tian, Junfang; Yun, Lifen

2014-12-01

At a non-signalized intersection, some vehicles violate the traffic rules to pass the intersection as soon as possible. These behaviors may cause many traffic conflicts even traffic accidents. In this paper, a simulation model is proposed to research the effects of these behaviors at a non-signalized intersection. Vehicle’s movement is simulated by the cellular automaton (CA) model. The game theory is introduced for simulating the intersection dynamics. Two types of driver participate the game process: cooperator (C) and defector (D). The cooperator obey the traffic rules, but the defector does not. A transition process may occur when the cooperator is waiting before the intersection. The critical value of waiting time follows the Weibull distribution. One transition regime is found in the phase diagram. The simulation results illustrate the applicability of the proposed model and reveal a number of interesting insights into the intersection management, including that the existence of defectors is benefit for the capacity of intersection, but also reduce the safety of intersection.

Detection and enforcement of failure-to-yield in an emergency vehicle preemption system

NASA Technical Reports Server (NTRS)

Bachelder, Aaron (Inventor); Wickline, Richard (Inventor)

2007-01-01

An intersection controlled by an intersection controller receives trigger signals from on-coming emergency vehicles responding to an emergency call. The intersection controller initiates surveillance of the intersection via cameras installed at the intersection in response to a received trigger signal. The surveillance may begin immediately upon receipt of the trigger signal from an emergency vehicle, or may wait until the intersection controller determines that the signaling emergency vehicle is in the field of view of the cameras at the intersection. Portions of the captured images are tagged by the intersection controller based on tag signals transmitted by the vehicle or based on detected traffic patterns that indicate a potential traffic violation. The captured images are downloaded to a processing facility that analyzes the images and automatically issues citations for captured traffic violations.

Changing the English Classroom: When Large-Scale "Common" Testing Meets Secondary Curriculum and Instruction in the United States

ERIC Educational Resources Information Center

Cimbricz, Sandra K.; McConn, Matthew L.

2015-01-01

This article explores the intersection of new, large-scale standards-based testing, teacher accountability policy, and secondary curriculum and instruction in the United States. Two federally funded consortia--the Smarter Balanced Assessment Consortium and the Partnership for Readiness of College and Careers--prove focal to this paper, as these…

Figure facts: encouraging undergraduates to take a data-centered approach to reading primary literature.

PubMed

Round, Jennifer E; Campbell, A Malcolm

2013-01-01

The ability to interpret experimental data is essential to understanding and participating in the process of scientific discovery. Reading primary research articles can be a frustrating experience for undergraduate biology students because they have very little experience interpreting data. To enhance their data interpretation skills, students used a template called "Figure Facts" to assist them with primary literature-based reading assignments in an advanced cellular neuroscience course. The Figure Facts template encourages students to adopt a data-centric approach, rather than a text-based approach, to understand research articles. Specifically, Figure Facts requires students to focus on the experimental data presented in each figure and identify specific conclusions that may be drawn from those results. Students who used Figure Facts for one semester increased the amount of time they spent examining figures in a primary research article, and regular exposure to primary literature was associated with improved student performance on a data interpretation skills test. Students reported decreased frustration associated with interpreting data figures, and their opinions of the Figure Facts template were overwhelmingly positive. In this paper, we present Figure Facts for others to adopt and adapt, with reflection on its implementation and effectiveness in improving undergraduate science education.

At the cross-roads: an on-road examination of driving errors at intersections.

PubMed

Young, Kristie L; Salmon, Paul M; Lenné, Michael G

2013-09-01

A significant proportion of road trauma occurs at intersections. Understanding the nature of driving errors at intersections therefore has the potential to lead to significant injury reductions. To further understand how the complexity of modern intersections shapes behaviour of these errors are compared to errors made mid-block, and the role of wider systems failures in intersection error causation is investigated in an on-road study. Twenty-five participants drove a pre-determined urban route incorporating 25 intersections. Two in-vehicle observers recorded the errors made while a range of other data was collected, including driver verbal protocols, video, driver eye glance behaviour and vehicle data (e.g., speed, braking and lane position). Participants also completed a post-trial cognitive task analysis interview. Participants were found to make 39 specific error types, with speeding violations the most common. Participants made significantly more errors at intersections compared to mid-block, with misjudgement, action and perceptual/observation errors more commonly observed at intersections. Traffic signal configuration was found to play a key role in intersection error causation, with drivers making more errors at partially signalised compared to fully signalised intersections. Copyright © 2012 Elsevier Ltd. All rights reserved.

The Effects of Horizontal-Tail Location and Wing Modifications on the High-Speed Stability and Control Characteristics of a 01.17-Scale Model of the McDonnell XF2H-1 Airplane (TED No, NACA DE336)

NASA Technical Reports Server (NTRS)

Emerson, Horace F.; Axelson, John A.

1949-01-01

An additional series of high-speed wind-tunnel tests of a modified 0.17-scale model of the McDonnell XF2H-1 airplane was conducted to evaluate the effects of a reduction in the thickness-to-chord ratios of the tail planes, the displacement of the horizontal tail relative to the vertical tail, and the extension of the trailing edge of the wing. Two tail-intersection fairings designed to improve the flow at the tail were also tested. The pitching-moment characteristics of the model were improved slightly by the use of the thinner tail sections. Rearward or rearward and downward displacements of the horizontal tail increased the critical Mach number at the tail intersection from 0.725 to a maximum of 0.80, but caused an excessive change in pitching-moment coefficient at the higher Mach numbers. Extending the trailing edge of the wing did not improve the static longitudinal-stability characteristics, but increased the pitching-down tendency between 0.725 and 0.825 Mach numbers prior to the pitching-up tendency. The extended wing did, however, increase the Mach numbers at which these tendencies occurred. The increase in the Mach numbers of divergence and the tuft studies indicate a probable increase in the buffet limit of the prototype airplane. No perceptible improvement of flow at the tail intersection was observed with the two fairings tested on the forward tail configuration.

Spatial Placement of Human Figure Drawings as an Indicator of Cognitive and Personality Characteristics Among Normal Young Adolescents

ERIC Educational Resources Information Center

Swartz, Jon D.; And Others

1976-01-01

The present study investigated the relationship between spatial placement of human figure drawings and measures of test anxiety, time estimation, and conceptual maturity. Results are discussed. (Author)

PubMed Central

Tousignant, J.; Côté, B.; Barolet, D.

1993-01-01

Urticaria is often incapacitating, yet it is not always easy to know whether a patient should undergo testing and what treatment should be prescribed. This article provides a systematic approach to urticaria and its treatment. Images Figures 1-2 Figures 3-4 PMID:8435550